32 files changed, 278844 insertions, 18 deletions

diff --git a/Config.in b/Config.in
index 268ea3558..d0d151222 100644
--- a/Config.in
+++ b/Config.in
@@ -110,6 +110,10 @@ depends on !ADK_TOOLCHAIN_ONLY && !ADK_CHOOSE_TARGET_ARCH && !ADK_CHOOSE_TARGET_
 
 choice
 prompt "Kernel Version"
+config ADK_KERNEL_VERSION_3_12_6
+	prompt "3.12.6"
+	boolean
+
 config ADK_KERNEL_VERSION_3_11_10
 	prompt "3.11.10"
 	boolean
@@ -122,6 +126,7 @@ endchoice
 
 config ADK_KERNEL_VERSION
 	string
+	default "3.12.6" if ADK_KERNEL_VERSION_3_12_6
 	default "3.11.10" if ADK_KERNEL_VERSION_3_11_10
 	default "3.4.71" if ADK_KERNEL_VERSION_3_4_71
 	help
diff --git a/mk/kernel-ver.mk b/mk/kernel-ver.mk
index e4c368af5..ae4a99069 100644
--- a/mk/kernel-ver.mk
+++ b/mk/kernel-ver.mk
@@ -4,6 +4,12 @@ KERNEL_MOD_VERSION:=	$(KERNEL_VERSION)
 KERNEL_RELEASE:=	1
 KERNEL_MD5SUM:=		59f352d3f4e2cdf6755f79e09fa09176
 endif
+ifeq ($(ADK_KERNEL_VERSION_3_12_6),y)
+KERNEL_VERSION:=	3.12.6
+KERNEL_MOD_VERSION:=	$(KERNEL_VERSION)
+KERNEL_RELEASE:=	1
+KERNEL_MD5SUM:=		ab2fcc368e20d804e77970196154fb9e
+endif
 ifeq ($(ADK_KERNEL_VERSION_3_11_10),y)
 KERNEL_VERSION:=	3.11.10
 KERNEL_MOD_VERSION:=	$(KERNEL_VERSION)
diff --git a/target/linux/config/Config.in.netdevice b/target/linux/config/Config.in.netdevice
index dcf9f03ec..2d5c8e3c7 100644
--- a/target/linux/config/Config.in.netdevice
+++ b/target/linux/config/Config.in.netdevice
@@ -113,16 +113,6 @@ config ADK_KERNEL_AR231X_ETHERNET
 	default n
 	help
 
-config ADK_KERNEL_NE2K_PCI
-	boolean
-	select ADK_KERNEL_NETDEVICES
-	select ADK_KERNEL_NET_ETHERNET
-	select ADK_KERNEL_NET_PCI
-	select ADK_KERNEL_MII
-	default y if ADK_TARGET_SYSTEM_QEMU_PPC
-	default n
-	help
-
 config ADK_KERNEL_KORINA
 	boolean
 	select ADK_KERNEL_NETDEVICES
@@ -164,10 +154,6 @@ config ADK_KERNEL_E1000
 	default y if ADK_NATIVE_SYSTEM_IBM_X40
 	default y if ADK_TARGET_SYSTEM_QEMU_I686
 	default y if ADK_TARGET_SYSTEM_QEMU_X86_64
-	default y if ADK_TARGET_SYSTEM_QEMU_MIPS64
-	default y if ADK_TARGET_SYSTEM_QEMU_MIPS64EL
-	default y if ADK_TARGET_SYSTEM_QEMU_MIPS
-	default y if ADK_TARGET_SYSTEM_QEMU_MIPSEL
 	default n
 	help
 
diff --git a/target/linux/config/Config.in.netfilter.ip4 b/target/linux/config/Config.in.netfilter.ip4
index 2cdd45d85..a9c42769a 100644
--- a/target/linux/config/Config.in.netfilter.ip4
+++ b/target/linux/config/Config.in.netfilter.ip4
@@ -38,6 +38,7 @@ config ADK_KPACKAGE_KMOD_FULL_NAT
 	tristate "Meta package for Full NAT"
 	select ADK_KPACKAGE_KMOD_NF_NAT if ADK_KERNEL_VERSION_3_4_71
 	select ADK_KPACKAGE_KMOD_NF_NAT_IPV4 if ADK_KERNEL_VERSION_3_11_10
+	select ADK_KPACKAGE_KMOD_NF_NAT_IPV4 if ADK_KERNEL_VERSION_3_12_6
 
 config ADK_KPACKAGE_KMOD_NF_NAT
 	tristate 'Full NAT'
@@ -51,7 +52,7 @@ config ADK_KPACKAGE_KMOD_NF_NAT
 config ADK_KPACKAGE_KMOD_NF_NAT_IPV4
 	tristate 'Full NAT'
 	depends on ADK_KPACKAGE_KMOD_IP_NF_IPTABLES
-	depends on ADK_KERNEL_VERSION_3_11_10
+	depends on ADK_KERNEL_VERSION_3_11_10 || ADK_KERNEL_VERSION_3_12_6
 	help
 	  The Full NAT option allows masquerading, port forwarding and other
 	  forms of full Network Address Port Translation.  It is controlled by
diff --git a/target/linux/config/Config.in.systems b/target/linux/config/Config.in.systems
index d41ce49f1..239f3495e 100644
--- a/target/linux/config/Config.in.systems
+++ b/target/linux/config/Config.in.systems
@@ -9,9 +9,6 @@ config ADK_KERNEL_PAGE_SIZE_16KB
 config ADK_KERNEL_ATHEROS_AR231X
 	boolean
 
-config ADK_KERNEL_MIPS_MALTA
-	boolean
-
 config ADK_KERNEL_MIKROTIK_RB532
 	boolean
 
diff --git a/target/linux/patches/3.12.6/bsd-compatibility.patch b/target/linux/patches/3.12.6/bsd-compatibility.patch
new file mode 100644
index 000000000..b954b658f
--- /dev/null
+++ b/target/linux/patches/3.12.6/bsd-compatibility.patch
@@ -0,0 +1,2538 @@
+diff -Nur linux-3.11.5.orig/scripts/Makefile.lib linux-3.11.5/scripts/Makefile.lib
+--- linux-3.11.5.orig/scripts/Makefile.lib	2013-10-14 03:14:45.000000000 +0200
++++ linux-3.11.5/scripts/Makefile.lib	2013-10-16 18:09:31.000000000 +0200
+@@ -281,7 +281,12 @@
+ size_append = printf $(shell						\
+ dec_size=0;								\
+ for F in $1; do								\
+-	fsize=$$(stat -c "%s" $$F);					\
++	if stat -qs .>/dev/null 2>&1; then				\
++		statcmd='stat -f %z';					\
++	else								\
++		statcmd='stat -c %s';					\
++	fi;								\
++	fsize=$$($$statcmd $$F);					\
+ 	dec_size=$$(expr $$dec_size + $$fsize);				\
+ done;									\
+ printf "%08x\n" $$dec_size |						\
+diff -Nur linux-3.11.5.orig/scripts/mod/mk_elfconfig.c linux-3.11.5/scripts/mod/mk_elfconfig.c
+--- linux-3.11.5.orig/scripts/mod/mk_elfconfig.c	2013-10-14 03:14:45.000000000 +0200
++++ linux-3.11.5/scripts/mod/mk_elfconfig.c	2013-10-16 18:09:31.000000000 +0200
+@@ -1,7 +1,18 @@
+ #include <stdio.h>
+ #include <stdlib.h>
+ #include <string.h>
+-#include <elf.h>
++
++#define EI_NIDENT (16)
++#define ELFMAG          "\177ELF"
++
++#define SELFMAG         4
++#define EI_CLASS        4
++#define ELFCLASS32      1               /* 32-bit objects */
++#define ELFCLASS64      2               /* 64-bit objects */
++
++#define EI_DATA         5               /* Data encoding byte index */
++#define ELFDATA2LSB     1               /* 2's complement, little endian */
++#define ELFDATA2MSB     2               /* 2's complement, big endian */
+ 
+ int
+ main(int argc, char **argv)
+diff -Nur linux-3.11.5.orig/scripts/mod/modpost.h linux-3.11.5/scripts/mod/modpost.h
+--- linux-3.11.5.orig/scripts/mod/modpost.h	2013-10-14 03:14:45.000000000 +0200
++++ linux-3.11.5/scripts/mod/modpost.h	2013-10-16 18:09:31.000000000 +0200
+@@ -7,7 +7,2453 @@
+ #include <sys/mman.h>
+ #include <fcntl.h>
+ #include <unistd.h>
+-#include <elf.h>
++
++
++/* This file defines standard ELF types, structures, and macros.
++   Copyright (C) 1995-1999,2000,2001,2002,2003 Free Software Foundation, Inc.
++   This file is part of the GNU C Library.
++
++   The GNU C Library is free software; you can redistribute it and/or
++   modify it under the terms of the GNU Lesser General Public
++   License as published by the Free Software Foundation; either
++   version 2.1 of the License, or (at your option) any later version.
++
++   The GNU C Library is distributed in the hope that it will be useful,
++   but WITHOUT ANY WARRANTY; without even the implied warranty of
++   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++   Lesser General Public License for more details.
++
++   You should have received a copy of the GNU Lesser General Public
++   License along with the GNU C Library; if not, write to the Free
++   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
++   02111-1307 USA.  */
++
++#ifndef _ELF_H
++#define	_ELF_H 1
++
++__BEGIN_DECLS
++
++/* Standard ELF types.  */
++
++#include <stdint.h>
++
++/* Type for a 16-bit quantity.  */
++typedef uint16_t Elf32_Half;
++typedef uint16_t Elf64_Half;
++
++/* Types for signed and unsigned 32-bit quantities.  */
++typedef uint32_t Elf32_Word;
++typedef	int32_t  Elf32_Sword;
++typedef uint32_t Elf64_Word;
++typedef	int32_t  Elf64_Sword;
++
++/* Types for signed and unsigned 64-bit quantities.  */
++typedef uint64_t Elf32_Xword;
++typedef	int64_t  Elf32_Sxword;
++typedef uint64_t Elf64_Xword;
++typedef	int64_t  Elf64_Sxword;
++
++/* Type of addresses.  */
++typedef uint32_t Elf32_Addr;
++typedef uint64_t Elf64_Addr;
++
++/* Type of file offsets.  */
++typedef uint32_t Elf32_Off;
++typedef uint64_t Elf64_Off;
++
++/* Type for section indices, which are 16-bit quantities.  */
++typedef uint16_t Elf32_Section;
++typedef uint16_t Elf64_Section;
++
++/* Type for version symbol information.  */
++typedef Elf32_Half Elf32_Versym;
++typedef Elf64_Half Elf64_Versym;
++
++
++/* The ELF file header.  This appears at the start of every ELF file.  */
++
++#define EI_NIDENT (16)
++
++typedef struct
++{
++  unsigned char	e_ident[EI_NIDENT];	/* Magic number and other info */
++  Elf32_Half	e_type;			/* Object file type */
++  Elf32_Half	e_machine;		/* Architecture */
++  Elf32_Word	e_version;		/* Object file version */
++  Elf32_Addr	e_entry;		/* Entry point virtual address */
++  Elf32_Off	e_phoff;		/* Program header table file offset */
++  Elf32_Off	e_shoff;		/* Section header table file offset */
++  Elf32_Word	e_flags;		/* Processor-specific flags */
++  Elf32_Half	e_ehsize;		/* ELF header size in bytes */
++  Elf32_Half	e_phentsize;		/* Program header table entry size */
++  Elf32_Half	e_phnum;		/* Program header table entry count */
++  Elf32_Half	e_shentsize;		/* Section header table entry size */
++  Elf32_Half	e_shnum;		/* Section header table entry count */
++  Elf32_Half	e_shstrndx;		/* Section header string table index */
++} Elf32_Ehdr;
++
++typedef struct
++{
++  unsigned char	e_ident[EI_NIDENT];	/* Magic number and other info */
++  Elf64_Half	e_type;			/* Object file type */
++  Elf64_Half	e_machine;		/* Architecture */
++  Elf64_Word	e_version;		/* Object file version */
++  Elf64_Addr	e_entry;		/* Entry point virtual address */
++  Elf64_Off	e_phoff;		/* Program header table file offset */
++  Elf64_Off	e_shoff;		/* Section header table file offset */
++  Elf64_Word	e_flags;		/* Processor-specific flags */
++  Elf64_Half	e_ehsize;		/* ELF header size in bytes */
++  Elf64_Half	e_phentsize;		/* Program header table entry size */
++  Elf64_Half	e_phnum;		/* Program header table entry count */
++  Elf64_Half	e_shentsize;		/* Section header table entry size */
++  Elf64_Half	e_shnum;		/* Section header table entry count */
++  Elf64_Half	e_shstrndx;		/* Section header string table index */
++} Elf64_Ehdr;
++
++/* Fields in the e_ident array.  The EI_* macros are indices into the
++   array.  The macros under each EI_* macro are the values the byte
++   may have.  */
++
++#define EI_MAG0		0		/* File identification byte 0 index */
++#define ELFMAG0		0x7f		/* Magic number byte 0 */
++
++#define EI_MAG1		1		/* File identification byte 1 index */
++#define ELFMAG1		'E'		/* Magic number byte 1 */
++
++#define EI_MAG2		2		/* File identification byte 2 index */
++#define ELFMAG2		'L'		/* Magic number byte 2 */
++
++#define EI_MAG3		3		/* File identification byte 3 index */
++#define ELFMAG3		'F'		/* Magic number byte 3 */
++
++/* Conglomeration of the identification bytes, for easy testing as a word.  */
++#define	ELFMAG		"\177ELF"
++#define	SELFMAG		4
++
++#define EI_CLASS	4		/* File class byte index */
++#define ELFCLASSNONE	0		/* Invalid class */
++#define ELFCLASS32	1		/* 32-bit objects */
++#define ELFCLASS64	2		/* 64-bit objects */
++#define ELFCLASSNUM	3
++
++#define EI_DATA		5		/* Data encoding byte index */
++#define ELFDATANONE	0		/* Invalid data encoding */
++#define ELFDATA2LSB	1		/* 2's complement, little endian */
++#define ELFDATA2MSB	2		/* 2's complement, big endian */
++#define ELFDATANUM	3
++
++#define EI_VERSION	6		/* File version byte index */
++					/* Value must be EV_CURRENT */
++
++#define EI_OSABI	7		/* OS ABI identification */
++#define ELFOSABI_NONE		0	/* UNIX System V ABI */
++#define ELFOSABI_SYSV		0	/* Alias.  */
++#define ELFOSABI_HPUX		1	/* HP-UX */
++#define ELFOSABI_NETBSD		2	/* NetBSD.  */
++#define ELFOSABI_LINUX		3	/* Linux.  */
++#define ELFOSABI_SOLARIS	6	/* Sun Solaris.  */
++#define ELFOSABI_AIX		7	/* IBM AIX.  */
++#define ELFOSABI_IRIX		8	/* SGI Irix.  */
++#define ELFOSABI_FREEBSD	9	/* FreeBSD.  */
++#define ELFOSABI_TRU64		10	/* Compaq TRU64 UNIX.  */
++#define ELFOSABI_MODESTO	11	/* Novell Modesto.  */
++#define ELFOSABI_OPENBSD	12	/* OpenBSD.  */
++#define ELFOSABI_ARM		97	/* ARM */
++#define ELFOSABI_STANDALONE	255	/* Standalone (embedded) application */
++
++#define EI_ABIVERSION	8		/* ABI version */
++
++#define EI_PAD		9		/* Byte index of padding bytes */
++
++/* Legal values for e_type (object file type).  */
++
++#define ET_NONE		0		/* No file type */
++#define ET_REL		1		/* Relocatable file */
++#define ET_EXEC		2		/* Executable file */
++#define ET_DYN		3		/* Shared object file */
++#define ET_CORE		4		/* Core file */
++#define	ET_NUM		5		/* Number of defined types */
++#define ET_LOOS		0xfe00		/* OS-specific range start */
++#define ET_HIOS		0xfeff		/* OS-specific range end */
++#define ET_LOPROC	0xff00		/* Processor-specific range start */
++#define ET_HIPROC	0xffff		/* Processor-specific range end */
++
++/* Legal values for e_machine (architecture).  */
++
++#define EM_NONE		 0		/* No machine */
++#define EM_M32		 1		/* AT&T WE 32100 */
++#define EM_SPARC	 2		/* SUN SPARC */
++#define EM_386		 3		/* Intel 80386 */
++#define EM_68K		 4		/* Motorola m68k family */
++#define EM_88K		 5		/* Motorola m88k family */
++#define EM_860		 7		/* Intel 80860 */
++#define EM_MIPS		 8		/* MIPS R3000 big-endian */
++#define EM_S370		 9		/* IBM System/370 */
++#define EM_MIPS_RS3_LE	10		/* MIPS R3000 little-endian */
++
++#define EM_PARISC	15		/* HPPA */
++#define EM_VPP500	17		/* Fujitsu VPP500 */
++#define EM_SPARC32PLUS	18		/* Sun's "v8plus" */
++#define EM_960		19		/* Intel 80960 */
++#define EM_PPC		20		/* PowerPC */
++#define EM_PPC64	21		/* PowerPC 64-bit */
++#define EM_S390		22		/* IBM S390 */
++
++#define EM_V800		36		/* NEC V800 series */
++#define EM_FR20		37		/* Fujitsu FR20 */
++#define EM_RH32		38		/* TRW RH-32 */
++#define EM_RCE		39		/* Motorola RCE */
++#define EM_ARM		40		/* ARM */
++#define EM_FAKE_ALPHA	41		/* Digital Alpha */
++#define EM_SH		42		/* Hitachi SH */
++#define EM_SPARCV9	43		/* SPARC v9 64-bit */
++#define EM_TRICORE	44		/* Siemens Tricore */
++#define EM_ARC		45		/* Argonaut RISC Core */
++#define EM_H8_300	46		/* Hitachi H8/300 */
++#define EM_H8_300H	47		/* Hitachi H8/300H */
++#define EM_H8S		48		/* Hitachi H8S */
++#define EM_H8_500	49		/* Hitachi H8/500 */
++#define EM_IA_64	50		/* Intel Merced */
++#define EM_MIPS_X	51		/* Stanford MIPS-X */
++#define EM_COLDFIRE	52		/* Motorola Coldfire */
++#define EM_68HC12	53		/* Motorola M68HC12 */
++#define EM_MMA		54		/* Fujitsu MMA Multimedia Accelerator*/
++#define EM_PCP		55		/* Siemens PCP */
++#define EM_NCPU		56		/* Sony nCPU embeeded RISC */
++#define EM_NDR1		57		/* Denso NDR1 microprocessor */
++#define EM_STARCORE	58		/* Motorola Start*Core processor */
++#define EM_ME16		59		/* Toyota ME16 processor */
++#define EM_ST100	60		/* STMicroelectronic ST100 processor */
++#define EM_TINYJ	61		/* Advanced Logic Corp. Tinyj emb.fam*/
++#define EM_X86_64	62		/* AMD x86-64 architecture */
++#define EM_PDSP		63		/* Sony DSP Processor */
++
++#define EM_FX66		66		/* Siemens FX66 microcontroller */
++#define EM_ST9PLUS	67		/* STMicroelectronics ST9+ 8/16 mc */
++#define EM_ST7		68		/* STmicroelectronics ST7 8 bit mc */
++#define EM_68HC16	69		/* Motorola MC68HC16 microcontroller */
++#define EM_68HC11	70		/* Motorola MC68HC11 microcontroller */
++#define EM_68HC08	71		/* Motorola MC68HC08 microcontroller */
++#define EM_68HC05	72		/* Motorola MC68HC05 microcontroller */
++#define EM_SVX		73		/* Silicon Graphics SVx */
++#define EM_ST19		74		/* STMicroelectronics ST19 8 bit mc */
++#define EM_VAX		75		/* Digital VAX */
++#define EM_CRIS		76		/* Axis Communications 32-bit embedded processor */
++#define EM_JAVELIN	77		/* Infineon Technologies 32-bit embedded processor */
++#define EM_FIREPATH	78		/* Element 14 64-bit DSP Processor */
++#define EM_ZSP		79		/* LSI Logic 16-bit DSP Processor */
++#define EM_MMIX		80		/* Donald Knuth's educational 64-bit processor */
++#define EM_HUANY	81		/* Harvard University machine-independent object files */
++#define EM_PRISM	82		/* SiTera Prism */
++#define EM_AVR		83		/* Atmel AVR 8-bit microcontroller */
++#define EM_FR30		84		/* Fujitsu FR30 */
++#define EM_D10V		85		/* Mitsubishi D10V */
++#define EM_D30V		86		/* Mitsubishi D30V */
++#define EM_V850		87		/* NEC v850 */
++#define EM_M32R		88		/* Mitsubishi M32R */
++#define EM_MN10300	89		/* Matsushita MN10300 */
++#define EM_MN10200	90		/* Matsushita MN10200 */
++#define EM_PJ		91		/* picoJava */
++#define EM_OPENRISC	92		/* OpenRISC 32-bit embedded processor */
++#define EM_ARC_A5	93		/* ARC Cores Tangent-A5 */
++#define EM_XTENSA	94		/* Tensilica Xtensa Architecture */
++#define EM_NUM		95
++
++/* If it is necessary to assign new unofficial EM_* values, please
++   pick large random numbers (0x8523, 0xa7f2, etc.) to minimize the
++   chances of collision with official or non-GNU unofficial values.  */
++
++#define EM_ALPHA	0x9026
++
++/* Legal values for e_version (version).  */
++
++#define EV_NONE		0		/* Invalid ELF version */
++#define EV_CURRENT	1		/* Current version */
++#define EV_NUM		2
++
++/* Section header.  */
++
++typedef struct
++{
++  Elf32_Word	sh_name;		/* Section name (string tbl index) */
++  Elf32_Word	sh_type;		/* Section type */
++  Elf32_Word	sh_flags;		/* Section flags */
++  Elf32_Addr	sh_addr;		/* Section virtual addr at execution */
++  Elf32_Off	sh_offset;		/* Section file offset */
++  Elf32_Word	sh_size;		/* Section size in bytes */
++  Elf32_Word	sh_link;		/* Link to another section */
++  Elf32_Word	sh_info;		/* Additional section information */
++  Elf32_Word	sh_addralign;		/* Section alignment */
++  Elf32_Word	sh_entsize;		/* Entry size if section holds table */
++} Elf32_Shdr;
++
++typedef struct
++{
++  Elf64_Word	sh_name;		/* Section name (string tbl index) */
++  Elf64_Word	sh_type;		/* Section type */
++  Elf64_Xword	sh_flags;		/* Section flags */
++  Elf64_Addr	sh_addr;		/* Section virtual addr at execution */
++  Elf64_Off	sh_offset;		/* Section file offset */
++  Elf64_Xword	sh_size;		/* Section size in bytes */
++  Elf64_Word	sh_link;		/* Link to another section */
++  Elf64_Word	sh_info;		/* Additional section information */
++  Elf64_Xword	sh_addralign;		/* Section alignment */
++  Elf64_Xword	sh_entsize;		/* Entry size if section holds table */
++} Elf64_Shdr;
++
++/* Special section indices.  */
++
++#define SHN_UNDEF	0		/* Undefined section */
++#define SHN_LORESERVE	0xff00		/* Start of reserved indices */
++#define SHN_LOPROC	0xff00		/* Start of processor-specific */
++#define SHN_HIPROC	0xff1f		/* End of processor-specific */
++#define SHN_LOOS	0xff20		/* Start of OS-specific */
++#define SHN_HIOS	0xff3f		/* End of OS-specific */
++#define SHN_ABS		0xfff1		/* Associated symbol is absolute */
++#define SHN_COMMON	0xfff2		/* Associated symbol is common */
++#define SHN_XINDEX	0xffff		/* Index is in extra table.  */
++#define SHN_HIRESERVE	0xffff		/* End of reserved indices */
++
++/* Legal values for sh_type (section type).  */
++
++#define SHT_NULL	  0		/* Section header table entry unused */
++#define SHT_PROGBITS	  1		/* Program data */
++#define SHT_SYMTAB	  2		/* Symbol table */
++#define SHT_STRTAB	  3		/* String table */
++#define SHT_RELA	  4		/* Relocation entries with addends */
++#define SHT_HASH	  5		/* Symbol hash table */
++#define SHT_DYNAMIC	  6		/* Dynamic linking information */
++#define SHT_NOTE	  7		/* Notes */
++#define SHT_NOBITS	  8		/* Program space with no data (bss) */
++#define SHT_REL		  9		/* Relocation entries, no addends */
++#define SHT_SHLIB	  10		/* Reserved */
++#define SHT_DYNSYM	  11		/* Dynamic linker symbol table */
++#define SHT_INIT_ARRAY	  14		/* Array of constructors */
++#define SHT_FINI_ARRAY	  15		/* Array of destructors */
++#define SHT_PREINIT_ARRAY 16		/* Array of pre-constructors */
++#define SHT_GROUP	  17		/* Section group */
++#define SHT_SYMTAB_SHNDX  18		/* Extended section indeces */
++#define	SHT_NUM		  19		/* Number of defined types.  */
++#define SHT_LOOS	  0x60000000	/* Start OS-specific */
++#define SHT_GNU_LIBLIST	  0x6ffffff7	/* Prelink library list */
++#define SHT_CHECKSUM	  0x6ffffff8	/* Checksum for DSO content.  */
++#define SHT_LOSUNW	  0x6ffffffa	/* Sun-specific low bound.  */
++#define SHT_SUNW_move	  0x6ffffffa
++#define SHT_SUNW_COMDAT   0x6ffffffb
++#define SHT_SUNW_syminfo  0x6ffffffc
++#define SHT_GNU_verdef	  0x6ffffffd	/* Version definition section.  */
++#define SHT_GNU_verneed	  0x6ffffffe	/* Version needs section.  */
++#define SHT_GNU_versym	  0x6fffffff	/* Version symbol table.  */
++#define SHT_HISUNW	  0x6fffffff	/* Sun-specific high bound.  */
++#define SHT_HIOS	  0x6fffffff	/* End OS-specific type */
++#define SHT_LOPROC	  0x70000000	/* Start of processor-specific */
++#define SHT_HIPROC	  0x7fffffff	/* End of processor-specific */
++#define SHT_LOUSER	  0x80000000	/* Start of application-specific */
++#define SHT_HIUSER	  0x8fffffff	/* End of application-specific */
++
++/* Legal values for sh_flags (section flags).  */
++
++#define SHF_WRITE	     (1 << 0)	/* Writable */
++#define SHF_ALLOC	     (1 << 1)	/* Occupies memory during execution */
++#define SHF_EXECINSTR	     (1 << 2)	/* Executable */
++#define SHF_MERGE	     (1 << 4)	/* Might be merged */
++#define SHF_STRINGS	     (1 << 5)	/* Contains nul-terminated strings */
++#define SHF_INFO_LINK	     (1 << 6)	/* `sh_info' contains SHT index */
++#define SHF_LINK_ORDER	     (1 << 7)	/* Preserve order after combining */
++#define SHF_OS_NONCONFORMING (1 << 8)	/* Non-standard OS specific handling
++					   required */
++#define SHF_GROUP	     (1 << 9)	/* Section is member of a group.  */
++#define SHF_TLS		     (1 << 10)	/* Section hold thread-local data.  */
++#define SHF_MASKOS	     0x0ff00000	/* OS-specific.  */
++#define SHF_MASKPROC	     0xf0000000	/* Processor-specific */
++
++/* Section group handling.  */
++#define GRP_COMDAT	0x1		/* Mark group as COMDAT.  */
++
++/* Symbol table entry.  */
++
++typedef struct
++{
++  Elf32_Word	st_name;		/* Symbol name (string tbl index) */
++  Elf32_Addr	st_value;		/* Symbol value */
++  Elf32_Word	st_size;		/* Symbol size */
++  unsigned char	st_info;		/* Symbol type and binding */
++  unsigned char	st_other;		/* Symbol visibility */
++  Elf32_Section	st_shndx;		/* Section index */
++} Elf32_Sym;
++
++typedef struct
++{
++  Elf64_Word	st_name;		/* Symbol name (string tbl index) */
++  unsigned char	st_info;		/* Symbol type and binding */
++  unsigned char st_other;		/* Symbol visibility */
++  Elf64_Section	st_shndx;		/* Section index */
++  Elf64_Addr	st_value;		/* Symbol value */
++  Elf64_Xword	st_size;		/* Symbol size */
++} Elf64_Sym;
++
++/* The syminfo section if available contains additional information about
++   every dynamic symbol.  */
++
++typedef struct
++{
++  Elf32_Half si_boundto;		/* Direct bindings, symbol bound to */
++  Elf32_Half si_flags;			/* Per symbol flags */
++} Elf32_Syminfo;
++
++typedef struct
++{
++  Elf64_Half si_boundto;		/* Direct bindings, symbol bound to */
++  Elf64_Half si_flags;			/* Per symbol flags */
++} Elf64_Syminfo;
++
++/* Possible values for si_boundto.  */
++#define SYMINFO_BT_SELF		0xffff	/* Symbol bound to self */
++#define SYMINFO_BT_PARENT	0xfffe	/* Symbol bound to parent */
++#define SYMINFO_BT_LOWRESERVE	0xff00	/* Beginning of reserved entries */
++
++/* Possible bitmasks for si_flags.  */
++#define SYMINFO_FLG_DIRECT	0x0001	/* Direct bound symbol */
++#define SYMINFO_FLG_PASSTHRU	0x0002	/* Pass-thru symbol for translator */
++#define SYMINFO_FLG_COPY	0x0004	/* Symbol is a copy-reloc */
++#define SYMINFO_FLG_LAZYLOAD	0x0008	/* Symbol bound to object to be lazy
++					   loaded */
++/* Syminfo version values.  */
++#define SYMINFO_NONE		0
++#define SYMINFO_CURRENT		1
++#define SYMINFO_NUM		2
++
++
++/* How to extract and insert information held in the st_info field.  */
++
++#define ELF32_ST_BIND(val)		(((unsigned char) (val)) >> 4)
++#define ELF32_ST_TYPE(val)		((val) & 0xf)
++#define ELF32_ST_INFO(bind, type)	(((bind) << 4) + ((type) & 0xf))
++
++/* Both Elf32_Sym and Elf64_Sym use the same one-byte st_info field.  */
++#define ELF64_ST_BIND(val)		ELF32_ST_BIND (val)
++#define ELF64_ST_TYPE(val)		ELF32_ST_TYPE (val)
++#define ELF64_ST_INFO(bind, type)	ELF32_ST_INFO ((bind), (type))
++
++/* Legal values for ST_BIND subfield of st_info (symbol binding).  */
++
++#define STB_LOCAL	0		/* Local symbol */
++#define STB_GLOBAL	1		/* Global symbol */
++#define STB_WEAK	2		/* Weak symbol */
++#define	STB_NUM		3		/* Number of defined types.  */
++#define STB_LOOS	10		/* Start of OS-specific */
++#define STB_HIOS	12		/* End of OS-specific */
++#define STB_LOPROC	13		/* Start of processor-specific */
++#define STB_HIPROC	15		/* End of processor-specific */
++
++/* Legal values for ST_TYPE subfield of st_info (symbol type).  */
++
++#define STT_NOTYPE	0		/* Symbol type is unspecified */
++#define STT_OBJECT	1		/* Symbol is a data object */
++#define STT_FUNC	2		/* Symbol is a code object */
++#define STT_SECTION	3		/* Symbol associated with a section */
++#define STT_FILE	4		/* Symbol's name is file name */
++#define STT_COMMON	5		/* Symbol is a common data object */
++#define STT_TLS		6		/* Symbol is thread-local data object*/
++#define	STT_NUM		7		/* Number of defined types.  */
++#define STT_LOOS	10		/* Start of OS-specific */
++#define STT_HIOS	12		/* End of OS-specific */
++#define STT_LOPROC	13		/* Start of processor-specific */
++#define STT_HIPROC	15		/* End of processor-specific */
++
++
++/* Symbol table indices are found in the hash buckets and chain table
++   of a symbol hash table section.  This special index value indicates
++   the end of a chain, meaning no further symbols are found in that bucket.  */
++
++#define STN_UNDEF	0		/* End of a chain.  */
++
++
++/* How to extract and insert information held in the st_other field.  */
++
++#define ELF32_ST_VISIBILITY(o)	((o) & 0x03)
++
++/* For ELF64 the definitions are the same.  */
++#define ELF64_ST_VISIBILITY(o)	ELF32_ST_VISIBILITY (o)
++
++/* Symbol visibility specification encoded in the st_other field.  */
++#define STV_DEFAULT	0		/* Default symbol visibility rules */
++#define STV_INTERNAL	1		/* Processor specific hidden class */
++#define STV_HIDDEN	2		/* Sym unavailable in other modules */
++#define STV_PROTECTED	3		/* Not preemptible, not exported */
++
++
++/* Relocation table entry without addend (in section of type SHT_REL).  */
++
++typedef struct
++{
++  Elf32_Addr	r_offset;		/* Address */
++  Elf32_Word	r_info;			/* Relocation type and symbol index */
++} Elf32_Rel;
++
++/* I have seen two different definitions of the Elf64_Rel and
++   Elf64_Rela structures, so we'll leave them out until Novell (or
++   whoever) gets their act together.  */
++/* The following, at least, is used on Sparc v9, MIPS, and Alpha.  */
++
++typedef struct
++{
++  Elf64_Addr	r_offset;		/* Address */
++  Elf64_Xword	r_info;			/* Relocation type and symbol index */
++} Elf64_Rel;
++
++/* Relocation table entry with addend (in section of type SHT_RELA).  */
++
++typedef struct
++{
++  Elf32_Addr	r_offset;		/* Address */
++  Elf32_Word	r_info;			/* Relocation type and symbol index */
++  Elf32_Sword	r_addend;		/* Addend */
++} Elf32_Rela;
++
++typedef struct
++{
++  Elf64_Addr	r_offset;		/* Address */
++  Elf64_Xword	r_info;			/* Relocation type and symbol index */
++  Elf64_Sxword	r_addend;		/* Addend */
++} Elf64_Rela;
++
++/* How to extract and insert information held in the r_info field.  */
++
++#define ELF32_R_SYM(val)		((val) >> 8)
++#define ELF32_R_TYPE(val)		((val) & 0xff)
++#define ELF32_R_INFO(sym, type)		(((sym) << 8) + ((type) & 0xff))
++
++#define ELF64_R_SYM(i)			((i) >> 32)
++#define ELF64_R_TYPE(i)			((i) & 0xffffffff)
++#define ELF64_R_INFO(sym,type)		((((Elf64_Xword) (sym)) << 32) + (type))
++
++/* Program segment header.  */
++
++typedef struct
++{
++  Elf32_Word	p_type;			/* Segment type */
++  Elf32_Off	p_offset;		/* Segment file offset */
++  Elf32_Addr	p_vaddr;		/* Segment virtual address */
++  Elf32_Addr	p_paddr;		/* Segment physical address */
++  Elf32_Word	p_filesz;		/* Segment size in file */
++  Elf32_Word	p_memsz;		/* Segment size in memory */
++  Elf32_Word	p_flags;		/* Segment flags */
++  Elf32_Word	p_align;		/* Segment alignment */
++} Elf32_Phdr;
++
++typedef struct
++{
++  Elf64_Word	p_type;			/* Segment type */
++  Elf64_Word	p_flags;		/* Segment flags */
++  Elf64_Off	p_offset;		/* Segment file offset */
++  Elf64_Addr	p_vaddr;		/* Segment virtual address */
++  Elf64_Addr	p_paddr;		/* Segment physical address */
++  Elf64_Xword	p_filesz;		/* Segment size in file */
++  Elf64_Xword	p_memsz;		/* Segment size in memory */
++  Elf64_Xword	p_align;		/* Segment alignment */
++} Elf64_Phdr;
++
++/* Legal values for p_type (segment type).  */
++
++#define	PT_NULL		0		/* Program header table entry unused */
++#define PT_LOAD		1		/* Loadable program segment */
++#define PT_DYNAMIC	2		/* Dynamic linking information */
++#define PT_INTERP	3		/* Program interpreter */
++#define PT_NOTE		4		/* Auxiliary information */
++#define PT_SHLIB	5		/* Reserved */
++#define PT_PHDR		6		/* Entry for header table itself */
++#define PT_TLS		7		/* Thread-local storage segment */
++#define	PT_NUM		8		/* Number of defined types */
++#define PT_LOOS		0x60000000	/* Start of OS-specific */
++#define PT_GNU_EH_FRAME	0x6474e550	/* GCC .eh_frame_hdr segment */
++#define PT_GNU_STACK	0x6474e551	/* Indicates stack executability */
++#define PT_LOSUNW	0x6ffffffa
++#define PT_SUNWBSS	0x6ffffffa	/* Sun Specific segment */
++#define PT_SUNWSTACK	0x6ffffffb	/* Stack segment */
++#define PT_HISUNW	0x6fffffff
++#define PT_HIOS		0x6fffffff	/* End of OS-specific */
++#define PT_LOPROC	0x70000000	/* Start of processor-specific */
++#define PT_HIPROC	0x7fffffff	/* End of processor-specific */
++
++/* Legal values for p_flags (segment flags).  */
++
++#define PF_X		(1 << 0)	/* Segment is executable */
++#define PF_W		(1 << 1)	/* Segment is writable */
++#define PF_R		(1 << 2)	/* Segment is readable */
++#define PF_MASKOS	0x0ff00000	/* OS-specific */
++#define PF_MASKPROC	0xf0000000	/* Processor-specific */
++
++/* Legal values for note segment descriptor types for core files. */
++
++#define NT_PRSTATUS	1		/* Contains copy of prstatus struct */
++#define NT_FPREGSET	2		/* Contains copy of fpregset struct */
++#define NT_PRPSINFO	3		/* Contains copy of prpsinfo struct */
++#define NT_PRXREG	4		/* Contains copy of prxregset struct */
++#define NT_TASKSTRUCT	4		/* Contains copy of task structure */
++#define NT_PLATFORM	5		/* String from sysinfo(SI_PLATFORM) */
++#define NT_AUXV		6		/* Contains copy of auxv array */
++#define NT_GWINDOWS	7		/* Contains copy of gwindows struct */
++#define NT_ASRS		8		/* Contains copy of asrset struct */
++#define NT_PSTATUS	10		/* Contains copy of pstatus struct */
++#define NT_PSINFO	13		/* Contains copy of psinfo struct */
++#define NT_PRCRED	14		/* Contains copy of prcred struct */
++#define NT_UTSNAME	15		/* Contains copy of utsname struct */
++#define NT_LWPSTATUS	16		/* Contains copy of lwpstatus struct */
++#define NT_LWPSINFO	17		/* Contains copy of lwpinfo struct */
++#define NT_PRFPXREG	20		/* Contains copy of fprxregset struct*/
++
++/* Legal values for the note segment descriptor types for object files.  */
++
++#define NT_VERSION	1		/* Contains a version string.  */
++
++
++/* Dynamic section entry.  */
++
++typedef struct
++{
++  Elf32_Sword	d_tag;			/* Dynamic entry type */
++  union
++    {
++      Elf32_Word d_val;			/* Integer value */
++      Elf32_Addr d_ptr;			/* Address value */
++    } d_un;
++} Elf32_Dyn;
++
++typedef struct
++{
++  Elf64_Sxword	d_tag;			/* Dynamic entry type */
++  union
++    {
++      Elf64_Xword d_val;		/* Integer value */
++      Elf64_Addr d_ptr;			/* Address value */
++    } d_un;
++} Elf64_Dyn;
++
++/* Legal values for d_tag (dynamic entry type).  */
++
++#define DT_NULL		0		/* Marks end of dynamic section */
++#define DT_NEEDED	1		/* Name of needed library */
++#define DT_PLTRELSZ	2		/* Size in bytes of PLT relocs */
++#define DT_PLTGOT	3		/* Processor defined value */
++#define DT_HASH		4		/* Address of symbol hash table */
++#define DT_STRTAB	5		/* Address of string table */
++#define DT_SYMTAB	6		/* Address of symbol table */
++#define DT_RELA		7		/* Address of Rela relocs */
++#define DT_RELASZ	8		/* Total size of Rela relocs */
++#define DT_RELAENT	9		/* Size of one Rela reloc */
++#define DT_STRSZ	10		/* Size of string table */
++#define DT_SYMENT	11		/* Size of one symbol table entry */
++#define DT_INIT		12		/* Address of init function */
++#define DT_FINI		13		/* Address of termination function */
++#define DT_SONAME	14		/* Name of shared object */
++#define DT_RPATH	15		/* Library search path (deprecated) */
++#define DT_SYMBOLIC	16		/* Start symbol search here */
++#define DT_REL		17		/* Address of Rel relocs */
++#define DT_RELSZ	18		/* Total size of Rel relocs */
++#define DT_RELENT	19		/* Size of one Rel reloc */
++#define DT_PLTREL	20		/* Type of reloc in PLT */
++#define DT_DEBUG	21		/* For debugging; unspecified */
++#define DT_TEXTREL	22		/* Reloc might modify .text */
++#define DT_JMPREL	23		/* Address of PLT relocs */
++#define	DT_BIND_NOW	24		/* Process relocations of object */
++#define	DT_INIT_ARRAY	25		/* Array with addresses of init fct */
++#define	DT_FINI_ARRAY	26		/* Array with addresses of fini fct */
++#define	DT_INIT_ARRAYSZ	27		/* Size in bytes of DT_INIT_ARRAY */
++#define	DT_FINI_ARRAYSZ	28		/* Size in bytes of DT_FINI_ARRAY */
++#define DT_RUNPATH	29		/* Library search path */
++#define DT_FLAGS	30		/* Flags for the object being loaded */
++#define DT_ENCODING	32		/* Start of encoded range */
++#define DT_PREINIT_ARRAY 32		/* Array with addresses of preinit fct*/
++#define DT_PREINIT_ARRAYSZ 33		/* size in bytes of DT_PREINIT_ARRAY */
++#define	DT_NUM		34		/* Number used */
++#define DT_LOOS		0x6000000d	/* Start of OS-specific */
++#define DT_HIOS		0x6ffff000	/* End of OS-specific */
++#define DT_LOPROC	0x70000000	/* Start of processor-specific */
++#define DT_HIPROC	0x7fffffff	/* End of processor-specific */
++#define	DT_PROCNUM	DT_MIPS_NUM	/* Most used by any processor */
++
++/* DT_* entries which fall between DT_VALRNGHI & DT_VALRNGLO use the
++   Dyn.d_un.d_val field of the Elf*_Dyn structure.  This follows Sun's
++   approach.  */
++#define DT_VALRNGLO	0x6ffffd00
++#define DT_GNU_PRELINKED 0x6ffffdf5	/* Prelinking timestamp */
++#define DT_GNU_CONFLICTSZ 0x6ffffdf6	/* Size of conflict section */
++#define DT_GNU_LIBLISTSZ 0x6ffffdf7	/* Size of library list */
++#define DT_CHECKSUM	0x6ffffdf8
++#define DT_PLTPADSZ	0x6ffffdf9
++#define DT_MOVEENT	0x6ffffdfa
++#define DT_MOVESZ	0x6ffffdfb
++#define DT_FEATURE_1	0x6ffffdfc	/* Feature selection (DTF_*).  */
++#define DT_POSFLAG_1	0x6ffffdfd	/* Flags for DT_* entries, effecting
++					   the following DT_* entry.  */
++#define DT_SYMINSZ	0x6ffffdfe	/* Size of syminfo table (in bytes) */
++#define DT_SYMINENT	0x6ffffdff	/* Entry size of syminfo */
++#define DT_VALRNGHI	0x6ffffdff
++#define DT_VALTAGIDX(tag)	(DT_VALRNGHI - (tag))	/* Reverse order! */
++#define DT_VALNUM 12
++
++/* DT_* entries which fall between DT_ADDRRNGHI & DT_ADDRRNGLO use the
++   Dyn.d_un.d_ptr field of the Elf*_Dyn structure.
++
++   If any adjustment is made to the ELF object after it has been
++   built these entries will need to be adjusted.  */
++#define DT_ADDRRNGLO	0x6ffffe00
++#define DT_GNU_CONFLICT	0x6ffffef8	/* Start of conflict section */
++#define DT_GNU_LIBLIST	0x6ffffef9	/* Library list */
++#define DT_CONFIG	0x6ffffefa	/* Configuration information.  */
++#define DT_DEPAUDIT	0x6ffffefb	/* Dependency auditing.  */
++#define DT_AUDIT	0x6ffffefc	/* Object auditing.  */
++#define	DT_PLTPAD	0x6ffffefd	/* PLT padding.  */
++#define	DT_MOVETAB	0x6ffffefe	/* Move table.  */
++#define DT_SYMINFO	0x6ffffeff	/* Syminfo table.  */
++#define DT_ADDRRNGHI	0x6ffffeff
++#define DT_ADDRTAGIDX(tag)	(DT_ADDRRNGHI - (tag))	/* Reverse order! */
++#define DT_ADDRNUM 10
++
++/* The versioning entry types.  The next are defined as part of the
++   GNU extension.  */
++#define DT_VERSYM	0x6ffffff0
++
++#define DT_RELACOUNT	0x6ffffff9
++#define DT_RELCOUNT	0x6ffffffa
++
++/* These were chosen by Sun.  */
++#define DT_FLAGS_1	0x6ffffffb	/* State flags, see DF_1_* below.  */
++#define	DT_VERDEF	0x6ffffffc	/* Address of version definition
++					   table */
++#define	DT_VERDEFNUM	0x6ffffffd	/* Number of version definitions */
++#define	DT_VERNEED	0x6ffffffe	/* Address of table with needed
++					   versions */
++#define	DT_VERNEEDNUM	0x6fffffff	/* Number of needed versions */
++#define DT_VERSIONTAGIDX(tag)	(DT_VERNEEDNUM - (tag))	/* Reverse order! */
++#define DT_VERSIONTAGNUM 16
++
++/* Sun added these machine-independent extensions in the "processor-specific"
++   range.  Be compatible.  */
++#define DT_AUXILIARY    0x7ffffffd      /* Shared object to load before self */
++#define DT_FILTER       0x7fffffff      /* Shared object to get values from */
++#define DT_EXTRATAGIDX(tag)	((Elf32_Word)-((Elf32_Sword) (tag) <<1>>1)-1)
++#define DT_EXTRANUM	3
++
++/* Values of `d_un.d_val' in the DT_FLAGS entry.  */
++#define DF_ORIGIN	0x00000001	/* Object may use DF_ORIGIN */
++#define DF_SYMBOLIC	0x00000002	/* Symbol resolutions starts here */
++#define DF_TEXTREL	0x00000004	/* Object contains text relocations */
++#define DF_BIND_NOW	0x00000008	/* No lazy binding for this object */
++#define DF_STATIC_TLS	0x00000010	/* Module uses the static TLS model */
++
++/* State flags selectable in the `d_un.d_val' element of the DT_FLAGS_1
++   entry in the dynamic section.  */
++#define DF_1_NOW	0x00000001	/* Set RTLD_NOW for this object.  */
++#define DF_1_GLOBAL	0x00000002	/* Set RTLD_GLOBAL for this object.  */
++#define DF_1_GROUP	0x00000004	/* Set RTLD_GROUP for this object.  */
++#define DF_1_NODELETE	0x00000008	/* Set RTLD_NODELETE for this object.*/
++#define DF_1_LOADFLTR	0x00000010	/* Trigger filtee loading at runtime.*/
++#define DF_1_INITFIRST	0x00000020	/* Set RTLD_INITFIRST for this object*/
++#define DF_1_NOOPEN	0x00000040	/* Set RTLD_NOOPEN for this object.  */
++#define DF_1_ORIGIN	0x00000080	/* $ORIGIN must be handled.  */
++#define DF_1_DIRECT	0x00000100	/* Direct binding enabled.  */
++#define DF_1_TRANS	0x00000200
++#define DF_1_INTERPOSE	0x00000400	/* Object is used to interpose.  */
++#define DF_1_NODEFLIB	0x00000800	/* Ignore default lib search path.  */
++#define DF_1_NODUMP	0x00001000	/* Object can't be dldump'ed.  */
++#define DF_1_CONFALT	0x00002000	/* Configuration alternative created.*/
++#define DF_1_ENDFILTEE	0x00004000	/* Filtee terminates filters search. */
++#define	DF_1_DISPRELDNE	0x00008000	/* Disp reloc applied at build time. */
++#define	DF_1_DISPRELPND	0x00010000	/* Disp reloc applied at run-time.  */
++
++/* Flags for the feature selection in DT_FEATURE_1.  */
++#define DTF_1_PARINIT	0x00000001
++#define DTF_1_CONFEXP	0x00000002
++
++/* Flags in the DT_POSFLAG_1 entry effecting only the next DT_* entry.  */
++#define DF_P1_LAZYLOAD	0x00000001	/* Lazyload following object.  */
++#define DF_P1_GROUPPERM	0x00000002	/* Symbols from next object are not
++					   generally available.  */
++
++/* Version definition sections.  */
++
++typedef struct
++{
++  Elf32_Half	vd_version;		/* Version revision */
++  Elf32_Half	vd_flags;		/* Version information */
++  Elf32_Half	vd_ndx;			/* Version Index */
++  Elf32_Half	vd_cnt;			/* Number of associated aux entries */
++  Elf32_Word	vd_hash;		/* Version name hash value */
++  Elf32_Word	vd_aux;			/* Offset in bytes to verdaux array */
++  Elf32_Word	vd_next;		/* Offset in bytes to next verdef
++					   entry */
++} Elf32_Verdef;
++
++typedef struct
++{
++  Elf64_Half	vd_version;		/* Version revision */
++  Elf64_Half	vd_flags;		/* Version information */
++  Elf64_Half	vd_ndx;			/* Version Index */
++  Elf64_Half	vd_cnt;			/* Number of associated aux entries */
++  Elf64_Word	vd_hash;		/* Version name hash value */
++  Elf64_Word	vd_aux;			/* Offset in bytes to verdaux array */
++  Elf64_Word	vd_next;		/* Offset in bytes to next verdef
++					   entry */
++} Elf64_Verdef;
++
++
++/* Legal values for vd_version (version revision).  */
++#define VER_DEF_NONE	0		/* No version */
++#define VER_DEF_CURRENT	1		/* Current version */
++#define VER_DEF_NUM	2		/* Given version number */
++
++/* Legal values for vd_flags (version information flags).  */
++#define VER_FLG_BASE	0x1		/* Version definition of file itself */
++#define VER_FLG_WEAK	0x2		/* Weak version identifier */
++
++/* Versym symbol index values.  */
++#define	VER_NDX_LOCAL		0	/* Symbol is local.  */
++#define	VER_NDX_GLOBAL		1	/* Symbol is global.  */
++#define	VER_NDX_LORESERVE	0xff00	/* Beginning of reserved entries.  */
++#define	VER_NDX_ELIMINATE	0xff01	/* Symbol is to be eliminated.  */
++
++/* Auxialiary version information.  */
++
++typedef struct
++{
++  Elf32_Word	vda_name;		/* Version or dependency names */
++  Elf32_Word	vda_next;		/* Offset in bytes to next verdaux
++					   entry */
++} Elf32_Verdaux;
++
++typedef struct
++{
++  Elf64_Word	vda_name;		/* Version or dependency names */
++  Elf64_Word	vda_next;		/* Offset in bytes to next verdaux
++					   entry */
++} Elf64_Verdaux;
++
++
++/* Version dependency section.  */
++
++typedef struct
++{
++  Elf32_Half	vn_version;		/* Version of structure */
++  Elf32_Half	vn_cnt;			/* Number of associated aux entries */
++  Elf32_Word	vn_file;		/* Offset of filename for this
++					   dependency */
++  Elf32_Word	vn_aux;			/* Offset in bytes to vernaux array */
++  Elf32_Word	vn_next;		/* Offset in bytes to next verneed
++					   entry */
++} Elf32_Verneed;
++
++typedef struct
++{
++  Elf64_Half	vn_version;		/* Version of structure */
++  Elf64_Half	vn_cnt;			/* Number of associated aux entries */
++  Elf64_Word	vn_file;		/* Offset of filename for this
++					   dependency */
++  Elf64_Word	vn_aux;			/* Offset in bytes to vernaux array */
++  Elf64_Word	vn_next;		/* Offset in bytes to next verneed
++					   entry */
++} Elf64_Verneed;
++
++
++/* Legal values for vn_version (version revision).  */
++#define VER_NEED_NONE	 0		/* No version */
++#define VER_NEED_CURRENT 1		/* Current version */
++#define VER_NEED_NUM	 2		/* Given version number */
++
++/* Auxiliary needed version information.  */
++
++typedef struct
++{
++  Elf32_Word	vna_hash;		/* Hash value of dependency name */
++  Elf32_Half	vna_flags;		/* Dependency specific information */
++  Elf32_Half	vna_other;		/* Unused */
++  Elf32_Word	vna_name;		/* Dependency name string offset */
++  Elf32_Word	vna_next;		/* Offset in bytes to next vernaux
++					   entry */
++} Elf32_Vernaux;
++
++typedef struct
++{
++  Elf64_Word	vna_hash;		/* Hash value of dependency name */
++  Elf64_Half	vna_flags;		/* Dependency specific information */
++  Elf64_Half	vna_other;		/* Unused */
++  Elf64_Word	vna_name;		/* Dependency name string offset */
++  Elf64_Word	vna_next;		/* Offset in bytes to next vernaux
++					   entry */
++} Elf64_Vernaux;
++
++
++/* Legal values for vna_flags.  */
++#define VER_FLG_WEAK	0x2		/* Weak version identifier */
++
++
++/* Auxiliary vector.  */
++
++/* This vector is normally only used by the program interpreter.  The
++   usual definition in an ABI supplement uses the name auxv_t.  The
++   vector is not usually defined in a standard <elf.h> file, but it
++   can't hurt.  We rename it to avoid conflicts.  The sizes of these
++   types are an arrangement between the exec server and the program
++   interpreter, so we don't fully specify them here.  */
++
++typedef struct
++{
++  int a_type;			/* Entry type */
++  union
++    {
++      long int a_val;		/* Integer value */
++      void *a_ptr;		/* Pointer value */
++      void (*a_fcn) (void);	/* Function pointer value */
++    } a_un;
++} Elf32_auxv_t;
++
++typedef struct
++{
++  long int a_type;		/* Entry type */
++  union
++    {
++      long int a_val;		/* Integer value */
++      void *a_ptr;		/* Pointer value */
++      void (*a_fcn) (void);	/* Function pointer value */
++    } a_un;
++} Elf64_auxv_t;
++
++/* Legal values for a_type (entry type).  */
++
++#define AT_NULL		0		/* End of vector */
++#define AT_IGNORE	1		/* Entry should be ignored */
++#define AT_EXECFD	2		/* File descriptor of program */
++#define AT_PHDR		3		/* Program headers for program */
++#define AT_PHENT	4		/* Size of program header entry */
++#define AT_PHNUM	5		/* Number of program headers */
++#define AT_PAGESZ	6		/* System page size */
++#define AT_BASE		7		/* Base address of interpreter */
++#define AT_FLAGS	8		/* Flags */
++#define AT_ENTRY	9		/* Entry point of program */
++#define AT_NOTELF	10		/* Program is not ELF */
++#define AT_UID		11		/* Real uid */
++#define AT_EUID		12		/* Effective uid */
++#define AT_GID		13		/* Real gid */
++#define AT_EGID		14		/* Effective gid */
++#define AT_CLKTCK	17		/* Frequency of times() */
++
++/* Some more special a_type values describing the hardware.  */
++#define AT_PLATFORM	15		/* String identifying platform.  */
++#define AT_HWCAP	16		/* Machine dependent hints about
++					   processor capabilities.  */
++
++/* This entry gives some information about the FPU initialization
++   performed by the kernel.  */
++#define AT_FPUCW	18		/* Used FPU control word.  */
++
++/* Cache block sizes.  */
++#define AT_DCACHEBSIZE	19		/* Data cache block size.  */
++#define AT_ICACHEBSIZE	20		/* Instruction cache block size.  */
++#define AT_UCACHEBSIZE	21		/* Unified cache block size.  */
++
++/* A special ignored value for PPC, used by the kernel to control the
++   interpretation of the AUXV. Must be > 16.  */
++#define AT_IGNOREPPC	22		/* Entry should be ignored.  */
++
++#define	AT_SECURE	23		/* Boolean, was exec setuid-like?  */
++
++/* Pointer to the global system page used for system calls and other
++   nice things.  */
++#define AT_SYSINFO	32
++#define AT_SYSINFO_EHDR	33
++
++
++/* Note section contents.  Each entry in the note section begins with
++   a header of a fixed form.  */
++
++typedef struct
++{
++  Elf32_Word n_namesz;			/* Length of the note's name.  */
++  Elf32_Word n_descsz;			/* Length of the note's descriptor.  */
++  Elf32_Word n_type;			/* Type of the note.  */
++} Elf32_Nhdr;
++
++typedef struct
++{
++  Elf64_Word n_namesz;			/* Length of the note's name.  */
++  Elf64_Word n_descsz;			/* Length of the note's descriptor.  */
++  Elf64_Word n_type;			/* Type of the note.  */
++} Elf64_Nhdr;
++
++/* Known names of notes.  */
++
++/* Solaris entries in the note section have this name.  */
++#define ELF_NOTE_SOLARIS	"SUNW Solaris"
++
++/* Note entries for GNU systems have this name.  */
++#define ELF_NOTE_GNU		"GNU"
++
++
++/* Defined types of notes for Solaris.  */
++
++/* Value of descriptor (one word) is desired pagesize for the binary.  */
++#define ELF_NOTE_PAGESIZE_HINT	1
++
++
++/* Defined note types for GNU systems.  */
++
++/* ABI information.  The descriptor consists of words:
++   word 0: OS descriptor
++   word 1: major version of the ABI
++   word 2: minor version of the ABI
++   word 3: subminor version of the ABI
++*/
++#define ELF_NOTE_ABI		1
++
++/* Known OSes.  These value can appear in word 0 of an ELF_NOTE_ABI
++   note section entry.  */
++#define ELF_NOTE_OS_LINUX	0
++#define ELF_NOTE_OS_GNU		1
++#define ELF_NOTE_OS_SOLARIS2	2
++#define ELF_NOTE_OS_FREEBSD	3
++
++
++/* Move records.  */
++typedef struct
++{
++  Elf32_Xword m_value;		/* Symbol value.  */
++  Elf32_Word m_info;		/* Size and index.  */
++  Elf32_Word m_poffset;		/* Symbol offset.  */
++  Elf32_Half m_repeat;		/* Repeat count.  */
++  Elf32_Half m_stride;		/* Stride info.  */
++} Elf32_Move;
++
++typedef struct
++{
++  Elf64_Xword m_value;		/* Symbol value.  */
++  Elf64_Xword m_info;		/* Size and index.  */
++  Elf64_Xword m_poffset;	/* Symbol offset.  */
++  Elf64_Half m_repeat;		/* Repeat count.  */
++  Elf64_Half m_stride;		/* Stride info.  */
++} Elf64_Move;
++
++/* Macro to construct move records.  */
++#define ELF32_M_SYM(info)	((info) >> 8)
++#define ELF32_M_SIZE(info)	((unsigned char) (info))
++#define ELF32_M_INFO(sym, size)	(((sym) << 8) + (unsigned char) (size))
++
++#define ELF64_M_SYM(info)	ELF32_M_SYM (info)
++#define ELF64_M_SIZE(info)	ELF32_M_SIZE (info)
++#define ELF64_M_INFO(sym, size)	ELF32_M_INFO (sym, size)
++
++
++/* Motorola 68k specific definitions.  */
++
++/* Values for Elf32_Ehdr.e_flags.  */
++#define EF_CPU32	0x00810000
++
++/* m68k relocs.  */
++
++#define R_68K_NONE	0		/* No reloc */
++#define R_68K_32	1		/* Direct 32 bit  */
++#define R_68K_16	2		/* Direct 16 bit  */
++#define R_68K_8		3		/* Direct 8 bit  */
++#define R_68K_PC32	4		/* PC relative 32 bit */
++#define R_68K_PC16	5		/* PC relative 16 bit */
++#define R_68K_PC8	6		/* PC relative 8 bit */
++#define R_68K_GOT32	7		/* 32 bit PC relative GOT entry */
++#define R_68K_GOT16	8		/* 16 bit PC relative GOT entry */
++#define R_68K_GOT8	9		/* 8 bit PC relative GOT entry */
++#define R_68K_GOT32O	10		/* 32 bit GOT offset */
++#define R_68K_GOT16O	11		/* 16 bit GOT offset */
++#define R_68K_GOT8O	12		/* 8 bit GOT offset */
++#define R_68K_PLT32	13		/* 32 bit PC relative PLT address */
++#define R_68K_PLT16	14		/* 16 bit PC relative PLT address */
++#define R_68K_PLT8	15		/* 8 bit PC relative PLT address */
++#define R_68K_PLT32O	16		/* 32 bit PLT offset */
++#define R_68K_PLT16O	17		/* 16 bit PLT offset */
++#define R_68K_PLT8O	18		/* 8 bit PLT offset */
++#define R_68K_COPY	19		/* Copy symbol at runtime */
++#define R_68K_GLOB_DAT	20		/* Create GOT entry */
++#define R_68K_JMP_SLOT	21		/* Create PLT entry */
++#define R_68K_RELATIVE	22		/* Adjust by program base */
++/* Keep this the last entry.  */
++#define R_68K_NUM	23
++
++/* Intel 80386 specific definitions.  */
++
++/* i386 relocs.  */
++
++#define R_386_NONE	   0		/* No reloc */
++#define R_386_32	   1		/* Direct 32 bit  */
++#define R_386_PC32	   2		/* PC relative 32 bit */
++#define R_386_GOT32	   3		/* 32 bit GOT entry */
++#define R_386_PLT32	   4		/* 32 bit PLT address */
++#define R_386_COPY	   5		/* Copy symbol at runtime */
++#define R_386_GLOB_DAT	   6		/* Create GOT entry */
++#define R_386_JMP_SLOT	   7		/* Create PLT entry */
++#define R_386_RELATIVE	   8		/* Adjust by program base */
++#define R_386_GOTOFF	   9		/* 32 bit offset to GOT */
++#define R_386_GOTPC	   10		/* 32 bit PC relative offset to GOT */
++#define R_386_32PLT	   11
++#define R_386_TLS_TPOFF	   14		/* Offset in static TLS block */
++#define R_386_TLS_IE	   15		/* Address of GOT entry for static TLS
++					   block offset */
++#define R_386_TLS_GOTIE	   16		/* GOT entry for static TLS block
++					   offset */
++#define R_386_TLS_LE	   17		/* Offset relative to static TLS
++					   block */
++#define R_386_TLS_GD	   18		/* Direct 32 bit for GNU version of
++					   general dynamic thread local data */
++#define R_386_TLS_LDM	   19		/* Direct 32 bit for GNU version of
++					   local dynamic thread local data
++					   in LE code */
++#define R_386_16	   20
++#define R_386_PC16	   21
++#define R_386_8		   22
++#define R_386_PC8	   23
++#define R_386_TLS_GD_32	   24		/* Direct 32 bit for general dynamic
++					   thread local data */
++#define R_386_TLS_GD_PUSH  25		/* Tag for pushl in GD TLS code */
++#define R_386_TLS_GD_CALL  26		/* Relocation for call to
++					   __tls_get_addr() */
++#define R_386_TLS_GD_POP   27		/* Tag for popl in GD TLS code */
++#define R_386_TLS_LDM_32   28		/* Direct 32 bit for local dynamic
++					   thread local data in LE code */
++#define R_386_TLS_LDM_PUSH 29		/* Tag for pushl in LDM TLS code */
++#define R_386_TLS_LDM_CALL 30		/* Relocation for call to
++					   __tls_get_addr() in LDM code */
++#define R_386_TLS_LDM_POP  31		/* Tag for popl in LDM TLS code */
++#define R_386_TLS_LDO_32   32		/* Offset relative to TLS block */
++#define R_386_TLS_IE_32	   33		/* GOT entry for negated static TLS
++					   block offset */
++#define R_386_TLS_LE_32	   34		/* Negated offset relative to static
++					   TLS block */
++#define R_386_TLS_DTPMOD32 35		/* ID of module containing symbol */
++#define R_386_TLS_DTPOFF32 36		/* Offset in TLS block */
++#define R_386_TLS_TPOFF32  37		/* Negated offset in static TLS block */
++/* Keep this the last entry.  */
++#define R_386_NUM	   38
++
++/* SUN SPARC specific definitions.  */
++
++/* Legal values for ST_TYPE subfield of st_info (symbol type).  */
++
++#define STT_REGISTER	13		/* Global register reserved to app. */
++
++/* Values for Elf64_Ehdr.e_flags.  */
++
++#define EF_SPARCV9_MM		3
++#define EF_SPARCV9_TSO		0
++#define EF_SPARCV9_PSO		1
++#define EF_SPARCV9_RMO		2
++#define EF_SPARC_LEDATA		0x800000 /* little endian data */
++#define EF_SPARC_EXT_MASK	0xFFFF00
++#define EF_SPARC_32PLUS		0x000100 /* generic V8+ features */
++#define EF_SPARC_SUN_US1	0x000200 /* Sun UltraSPARC1 extensions */
++#define EF_SPARC_HAL_R1		0x000400 /* HAL R1 extensions */
++#define EF_SPARC_SUN_US3	0x000800 /* Sun UltraSPARCIII extensions */
++
++/* SPARC relocs.  */
++
++#define R_SPARC_NONE		0	/* No reloc */
++#define R_SPARC_8		1	/* Direct 8 bit */
++#define R_SPARC_16		2	/* Direct 16 bit */
++#define R_SPARC_32		3	/* Direct 32 bit */
++#define R_SPARC_DISP8		4	/* PC relative 8 bit */
++#define R_SPARC_DISP16		5	/* PC relative 16 bit */
++#define R_SPARC_DISP32		6	/* PC relative 32 bit */
++#define R_SPARC_WDISP30		7	/* PC relative 30 bit shifted */
++#define R_SPARC_WDISP22		8	/* PC relative 22 bit shifted */
++#define R_SPARC_HI22		9	/* High 22 bit */
++#define R_SPARC_22		10	/* Direct 22 bit */
++#define R_SPARC_13		11	/* Direct 13 bit */
++#define R_SPARC_LO10		12	/* Truncated 10 bit */
++#define R_SPARC_GOT10		13	/* Truncated 10 bit GOT entry */
++#define R_SPARC_GOT13		14	/* 13 bit GOT entry */
++#define R_SPARC_GOT22		15	/* 22 bit GOT entry shifted */
++#define R_SPARC_PC10		16	/* PC relative 10 bit truncated */
++#define R_SPARC_PC22		17	/* PC relative 22 bit shifted */
++#define R_SPARC_WPLT30		18	/* 30 bit PC relative PLT address */
++#define R_SPARC_COPY		19	/* Copy symbol at runtime */
++#define R_SPARC_GLOB_DAT	20	/* Create GOT entry */
++#define R_SPARC_JMP_SLOT	21	/* Create PLT entry */
++#define R_SPARC_RELATIVE	22	/* Adjust by program base */
++#define R_SPARC_UA32		23	/* Direct 32 bit unaligned */
++
++/* Additional Sparc64 relocs.  */
++
++#define R_SPARC_PLT32		24	/* Direct 32 bit ref to PLT entry */
++#define R_SPARC_HIPLT22		25	/* High 22 bit PLT entry */
++#define R_SPARC_LOPLT10		26	/* Truncated 10 bit PLT entry */
++#define R_SPARC_PCPLT32		27	/* PC rel 32 bit ref to PLT entry */
++#define R_SPARC_PCPLT22		28	/* PC rel high 22 bit PLT entry */
++#define R_SPARC_PCPLT10		29	/* PC rel trunc 10 bit PLT entry */
++#define R_SPARC_10		30	/* Direct 10 bit */
++#define R_SPARC_11		31	/* Direct 11 bit */
++#define R_SPARC_64		32	/* Direct 64 bit */
++#define R_SPARC_OLO10		33	/* 10bit with secondary 13bit addend */
++#define R_SPARC_HH22		34	/* Top 22 bits of direct 64 bit */
++#define R_SPARC_HM10		35	/* High middle 10 bits of ... */
++#define R_SPARC_LM22		36	/* Low middle 22 bits of ... */
++#define R_SPARC_PC_HH22		37	/* Top 22 bits of pc rel 64 bit */
++#define R_SPARC_PC_HM10		38	/* High middle 10 bit of ... */
++#define R_SPARC_PC_LM22		39	/* Low miggle 22 bits of ... */
++#define R_SPARC_WDISP16		40	/* PC relative 16 bit shifted */
++#define R_SPARC_WDISP19		41	/* PC relative 19 bit shifted */
++#define R_SPARC_7		43	/* Direct 7 bit */
++#define R_SPARC_5		44	/* Direct 5 bit */
++#define R_SPARC_6		45	/* Direct 6 bit */
++#define R_SPARC_DISP64		46	/* PC relative 64 bit */
++#define R_SPARC_PLT64		47	/* Direct 64 bit ref to PLT entry */
++#define R_SPARC_HIX22		48	/* High 22 bit complemented */
++#define R_SPARC_LOX10		49	/* Truncated 11 bit complemented */
++#define R_SPARC_H44		50	/* Direct high 12 of 44 bit */
++#define R_SPARC_M44		51	/* Direct mid 22 of 44 bit */
++#define R_SPARC_L44		52	/* Direct low 10 of 44 bit */
++#define R_SPARC_REGISTER	53	/* Global register usage */
++#define R_SPARC_UA64		54	/* Direct 64 bit unaligned */
++#define R_SPARC_UA16		55	/* Direct 16 bit unaligned */
++#define R_SPARC_TLS_GD_HI22	56
++#define R_SPARC_TLS_GD_LO10	57
++#define R_SPARC_TLS_GD_ADD	58
++#define R_SPARC_TLS_GD_CALL	59
++#define R_SPARC_TLS_LDM_HI22	60
++#define R_SPARC_TLS_LDM_LO10	61
++#define R_SPARC_TLS_LDM_ADD	62
++#define R_SPARC_TLS_LDM_CALL	63
++#define R_SPARC_TLS_LDO_HIX22	64
++#define R_SPARC_TLS_LDO_LOX10	65
++#define R_SPARC_TLS_LDO_ADD	66
++#define R_SPARC_TLS_IE_HI22	67
++#define R_SPARC_TLS_IE_LO10	68
++#define R_SPARC_TLS_IE_LD	69
++#define R_SPARC_TLS_IE_LDX	70
++#define R_SPARC_TLS_IE_ADD	71
++#define R_SPARC_TLS_LE_HIX22	72
++#define R_SPARC_TLS_LE_LOX10	73
++#define R_SPARC_TLS_DTPMOD32	74
++#define R_SPARC_TLS_DTPMOD64	75
++#define R_SPARC_TLS_DTPOFF32	76
++#define R_SPARC_TLS_DTPOFF64	77
++#define R_SPARC_TLS_TPOFF32	78
++#define R_SPARC_TLS_TPOFF64	79
++/* Keep this the last entry.  */
++#define R_SPARC_NUM		80
++
++/* For Sparc64, legal values for d_tag of Elf64_Dyn.  */
++
++#define DT_SPARC_REGISTER 0x70000001
++#define DT_SPARC_NUM	2
++
++/* Bits present in AT_HWCAP, primarily for Sparc32.  */
++
++#define HWCAP_SPARC_FLUSH	1	/* The cpu supports flush insn.  */
++#define HWCAP_SPARC_STBAR	2
++#define HWCAP_SPARC_SWAP	4
++#define HWCAP_SPARC_MULDIV	8
++#define HWCAP_SPARC_V9		16	/* The cpu is v9, so v8plus is ok.  */
++#define HWCAP_SPARC_ULTRA3	32
++
++/* MIPS R3000 specific definitions.  */
++
++/* Legal values for e_flags field of Elf32_Ehdr.  */
++
++#define EF_MIPS_NOREORDER   1		/* A .noreorder directive was used */
++#define EF_MIPS_PIC	    2		/* Contains PIC code */
++#define EF_MIPS_CPIC	    4		/* Uses PIC calling sequence */
++#define EF_MIPS_XGOT	    8
++#define EF_MIPS_64BIT_WHIRL 16
++#define EF_MIPS_ABI2	    32
++#define EF_MIPS_ABI_ON32    64
++#define EF_MIPS_ARCH	    0xf0000000	/* MIPS architecture level */
++
++/* Legal values for MIPS architecture level.  */
++
++#define EF_MIPS_ARCH_1	    0x00000000	/* -mips1 code.  */
++#define EF_MIPS_ARCH_2	    0x10000000	/* -mips2 code.  */
++#define EF_MIPS_ARCH_3	    0x20000000	/* -mips3 code.  */
++#define EF_MIPS_ARCH_4	    0x30000000	/* -mips4 code.  */
++#define EF_MIPS_ARCH_5	    0x40000000	/* -mips5 code.  */
++#define EF_MIPS_ARCH_32	    0x60000000	/* MIPS32 code.  */
++#define EF_MIPS_ARCH_64	    0x70000000	/* MIPS64 code.  */
++
++/* The following are non-official names and should not be used.  */
++
++#define E_MIPS_ARCH_1	  0x00000000	/* -mips1 code.  */
++#define E_MIPS_ARCH_2	  0x10000000	/* -mips2 code.  */
++#define E_MIPS_ARCH_3	  0x20000000	/* -mips3 code.  */
++#define E_MIPS_ARCH_4	  0x30000000	/* -mips4 code.  */
++#define E_MIPS_ARCH_5	  0x40000000	/* -mips5 code.  */
++#define E_MIPS_ARCH_32	  0x60000000	/* MIPS32 code.  */
++#define E_MIPS_ARCH_64	  0x70000000	/* MIPS64 code.  */
++
++/* Special section indices.  */
++
++#define SHN_MIPS_ACOMMON    0xff00	/* Allocated common symbols */
++#define SHN_MIPS_TEXT	    0xff01	/* Allocated test symbols.  */
++#define SHN_MIPS_DATA	    0xff02	/* Allocated data symbols.  */
++#define SHN_MIPS_SCOMMON    0xff03	/* Small common symbols */
++#define SHN_MIPS_SUNDEFINED 0xff04	/* Small undefined symbols */
++
++/* Legal values for sh_type field of Elf32_Shdr.  */
++
++#define SHT_MIPS_LIBLIST       0x70000000 /* Shared objects used in link */
++#define SHT_MIPS_MSYM	       0x70000001
++#define SHT_MIPS_CONFLICT      0x70000002 /* Conflicting symbols */
++#define SHT_MIPS_GPTAB	       0x70000003 /* Global data area sizes */
++#define SHT_MIPS_UCODE	       0x70000004 /* Reserved for SGI/MIPS compilers */
++#define SHT_MIPS_DEBUG	       0x70000005 /* MIPS ECOFF debugging information*/
++#define SHT_MIPS_REGINFO       0x70000006 /* Register usage information */
++#define SHT_MIPS_PACKAGE       0x70000007
++#define SHT_MIPS_PACKSYM       0x70000008
++#define SHT_MIPS_RELD	       0x70000009
++#define SHT_MIPS_IFACE         0x7000000b
++#define SHT_MIPS_CONTENT       0x7000000c
++#define SHT_MIPS_OPTIONS       0x7000000d /* Miscellaneous options.  */
++#define SHT_MIPS_SHDR	       0x70000010
++#define SHT_MIPS_FDESC	       0x70000011
++#define SHT_MIPS_EXTSYM	       0x70000012
++#define SHT_MIPS_DENSE	       0x70000013
++#define SHT_MIPS_PDESC	       0x70000014
++#define SHT_MIPS_LOCSYM	       0x70000015
++#define SHT_MIPS_AUXSYM	       0x70000016
++#define SHT_MIPS_OPTSYM	       0x70000017
++#define SHT_MIPS_LOCSTR	       0x70000018
++#define SHT_MIPS_LINE	       0x70000019
++#define SHT_MIPS_RFDESC	       0x7000001a
++#define SHT_MIPS_DELTASYM      0x7000001b
++#define SHT_MIPS_DELTAINST     0x7000001c
++#define SHT_MIPS_DELTACLASS    0x7000001d
++#define SHT_MIPS_DWARF         0x7000001e /* DWARF debugging information.  */
++#define SHT_MIPS_DELTADECL     0x7000001f
++#define SHT_MIPS_SYMBOL_LIB    0x70000020
++#define SHT_MIPS_EVENTS	       0x70000021 /* Event section.  */
++#define SHT_MIPS_TRANSLATE     0x70000022
++#define SHT_MIPS_PIXIE	       0x70000023
++#define SHT_MIPS_XLATE	       0x70000024
++#define SHT_MIPS_XLATE_DEBUG   0x70000025
++#define SHT_MIPS_WHIRL	       0x70000026
++#define SHT_MIPS_EH_REGION     0x70000027
++#define SHT_MIPS_XLATE_OLD     0x70000028
++#define SHT_MIPS_PDR_EXCEPTION 0x70000029
++
++/* Legal values for sh_flags field of Elf32_Shdr.  */
++
++#define SHF_MIPS_GPREL	 0x10000000	/* Must be part of global data area */
++#define SHF_MIPS_MERGE	 0x20000000
++#define SHF_MIPS_ADDR	 0x40000000
++#define SHF_MIPS_STRINGS 0x80000000
++#define SHF_MIPS_NOSTRIP 0x08000000
++#define SHF_MIPS_LOCAL	 0x04000000
++#define SHF_MIPS_NAMES	 0x02000000
++#define SHF_MIPS_NODUPE	 0x01000000
++
++
++/* Symbol tables.  */
++
++/* MIPS specific values for `st_other'.  */
++#define STO_MIPS_DEFAULT		0x0
++#define STO_MIPS_INTERNAL		0x1
++#define STO_MIPS_HIDDEN			0x2
++#define STO_MIPS_PROTECTED		0x3
++#define STO_MIPS_SC_ALIGN_UNUSED	0xff
++
++/* MIPS specific values for `st_info'.  */
++#define STB_MIPS_SPLIT_COMMON		13
++
++/* Entries found in sections of type SHT_MIPS_GPTAB.  */
++
++typedef union
++{
++  struct
++    {
++      Elf32_Word gt_current_g_value;	/* -G value used for compilation */
++      Elf32_Word gt_unused;		/* Not used */
++    } gt_header;			/* First entry in section */
++  struct
++    {
++      Elf32_Word gt_g_value;		/* If this value were used for -G */
++      Elf32_Word gt_bytes;		/* This many bytes would be used */
++    } gt_entry;				/* Subsequent entries in section */
++} Elf32_gptab;
++
++/* Entry found in sections of type SHT_MIPS_REGINFO.  */
++
++typedef struct
++{
++  Elf32_Word	ri_gprmask;		/* General registers used */
++  Elf32_Word	ri_cprmask[4];		/* Coprocessor registers used */
++  Elf32_Sword	ri_gp_value;		/* $gp register value */
++} Elf32_RegInfo;
++
++/* Entries found in sections of type SHT_MIPS_OPTIONS.  */
++
++typedef struct
++{
++  unsigned char kind;		/* Determines interpretation of the
++				   variable part of descriptor.  */
++  unsigned char size;		/* Size of descriptor, including header.  */
++  Elf32_Section section;	/* Section header index of section affected,
++				   0 for global options.  */
++  Elf32_Word info;		/* Kind-specific information.  */
++} Elf_Options;
++
++/* Values for `kind' field in Elf_Options.  */
++
++#define ODK_NULL	0	/* Undefined.  */
++#define ODK_REGINFO	1	/* Register usage information.  */
++#define ODK_EXCEPTIONS	2	/* Exception processing options.  */
++#define ODK_PAD		3	/* Section padding options.  */
++#define ODK_HWPATCH	4	/* Hardware workarounds performed */
++#define ODK_FILL	5	/* record the fill value used by the linker. */
++#define ODK_TAGS	6	/* reserve space for desktop tools to write. */
++#define ODK_HWAND	7	/* HW workarounds.  'AND' bits when merging. */
++#define ODK_HWOR	8	/* HW workarounds.  'OR' bits when merging.  */
++
++/* Values for `info' in Elf_Options for ODK_EXCEPTIONS entries.  */
++
++#define OEX_FPU_MIN	0x1f	/* FPE's which MUST be enabled.  */
++#define OEX_FPU_MAX	0x1f00	/* FPE's which MAY be enabled.  */
++#define OEX_PAGE0	0x10000	/* page zero must be mapped.  */
++#define OEX_SMM		0x20000	/* Force sequential memory mode?  */
++#define OEX_FPDBUG	0x40000	/* Force floating point debug mode?  */
++#define OEX_PRECISEFP	OEX_FPDBUG
++#define OEX_DISMISS	0x80000	/* Dismiss invalid address faults?  */
++
++#define OEX_FPU_INVAL	0x10
++#define OEX_FPU_DIV0	0x08
++#define OEX_FPU_OFLO	0x04
++#define OEX_FPU_UFLO	0x02
++#define OEX_FPU_INEX	0x01
++
++/* Masks for `info' in Elf_Options for an ODK_HWPATCH entry.  */
++
++#define OHW_R4KEOP	0x1	/* R4000 end-of-page patch.  */
++#define OHW_R8KPFETCH	0x2	/* may need R8000 prefetch patch.  */
++#define OHW_R5KEOP	0x4	/* R5000 end-of-page patch.  */
++#define OHW_R5KCVTL	0x8	/* R5000 cvt.[ds].l bug.  clean=1.  */
++
++#define OPAD_PREFIX	0x1
++#define OPAD_POSTFIX	0x2
++#define OPAD_SYMBOL	0x4
++
++/* Entry found in `.options' section.  */
++
++typedef struct
++{
++  Elf32_Word hwp_flags1;	/* Extra flags.  */
++  Elf32_Word hwp_flags2;	/* Extra flags.  */
++} Elf_Options_Hw;
++
++/* Masks for `info' in ElfOptions for ODK_HWAND and ODK_HWOR entries.  */
++
++#define OHWA0_R4KEOP_CHECKED	0x00000001
++#define OHWA1_R4KEOP_CLEAN	0x00000002
++
++/* MIPS relocs.  */
++
++#define R_MIPS_NONE		0	/* No reloc */
++#define R_MIPS_16		1	/* Direct 16 bit */
++#define R_MIPS_32		2	/* Direct 32 bit */
++#define R_MIPS_REL32		3	/* PC relative 32 bit */
++#define R_MIPS_26		4	/* Direct 26 bit shifted */
++#define R_MIPS_HI16		5	/* High 16 bit */
++#define R_MIPS_LO16		6	/* Low 16 bit */
++#define R_MIPS_GPREL16		7	/* GP relative 16 bit */
++#define R_MIPS_LITERAL		8	/* 16 bit literal entry */
++#define R_MIPS_GOT16		9	/* 16 bit GOT entry */
++#define R_MIPS_PC16		10	/* PC relative 16 bit */
++#define R_MIPS_CALL16		11	/* 16 bit GOT entry for function */
++#define R_MIPS_GPREL32		12	/* GP relative 32 bit */
++
++#define R_MIPS_SHIFT5		16
++#define R_MIPS_SHIFT6		17
++#define R_MIPS_64		18
++#define R_MIPS_GOT_DISP		19
++#define R_MIPS_GOT_PAGE		20
++#define R_MIPS_GOT_OFST		21
++#define R_MIPS_GOT_HI16		22
++#define R_MIPS_GOT_LO16		23
++#define R_MIPS_SUB		24
++#define R_MIPS_INSERT_A		25
++#define R_MIPS_INSERT_B		26
++#define R_MIPS_DELETE		27
++#define R_MIPS_HIGHER		28
++#define R_MIPS_HIGHEST		29
++#define R_MIPS_CALL_HI16	30
++#define R_MIPS_CALL_LO16	31
++#define R_MIPS_SCN_DISP		32
++#define R_MIPS_REL16		33
++#define R_MIPS_ADD_IMMEDIATE	34
++#define R_MIPS_PJUMP		35
++#define R_MIPS_RELGOT		36
++#define R_MIPS_JALR		37
++/* Keep this the last entry.  */
++#define R_MIPS_NUM		38
++
++/* Legal values for p_type field of Elf32_Phdr.  */
++
++#define PT_MIPS_REGINFO	0x70000000	/* Register usage information */
++#define PT_MIPS_RTPROC  0x70000001	/* Runtime procedure table. */
++#define PT_MIPS_OPTIONS 0x70000002
++
++/* Special program header types.  */
++
++#define PF_MIPS_LOCAL	0x10000000
++
++/* Legal values for d_tag field of Elf32_Dyn.  */
++
++#define DT_MIPS_RLD_VERSION  0x70000001	/* Runtime linker interface version */
++#define DT_MIPS_TIME_STAMP   0x70000002	/* Timestamp */
++#define DT_MIPS_ICHECKSUM    0x70000003	/* Checksum */
++#define DT_MIPS_IVERSION     0x70000004	/* Version string (string tbl index) */
++#define DT_MIPS_FLAGS	     0x70000005	/* Flags */
++#define DT_MIPS_BASE_ADDRESS 0x70000006	/* Base address */
++#define DT_MIPS_MSYM	     0x70000007
++#define DT_MIPS_CONFLICT     0x70000008	/* Address of CONFLICT section */
++#define DT_MIPS_LIBLIST	     0x70000009	/* Address of LIBLIST section */
++#define DT_MIPS_LOCAL_GOTNO  0x7000000a	/* Number of local GOT entries */
++#define DT_MIPS_CONFLICTNO   0x7000000b	/* Number of CONFLICT entries */
++#define DT_MIPS_LIBLISTNO    0x70000010	/* Number of LIBLIST entries */
++#define DT_MIPS_SYMTABNO     0x70000011	/* Number of DYNSYM entries */
++#define DT_MIPS_UNREFEXTNO   0x70000012	/* First external DYNSYM */
++#define DT_MIPS_GOTSYM	     0x70000013	/* First GOT entry in DYNSYM */
++#define DT_MIPS_HIPAGENO     0x70000014	/* Number of GOT page table entries */
++#define DT_MIPS_RLD_MAP	     0x70000016	/* Address of run time loader map.  */
++#define DT_MIPS_DELTA_CLASS  0x70000017	/* Delta C++ class definition.  */
++#define DT_MIPS_DELTA_CLASS_NO    0x70000018 /* Number of entries in
++						DT_MIPS_DELTA_CLASS.  */
++#define DT_MIPS_DELTA_INSTANCE    0x70000019 /* Delta C++ class instances.  */
++#define DT_MIPS_DELTA_INSTANCE_NO 0x7000001a /* Number of entries in
++						DT_MIPS_DELTA_INSTANCE.  */
++#define DT_MIPS_DELTA_RELOC  0x7000001b /* Delta relocations.  */
++#define DT_MIPS_DELTA_RELOC_NO 0x7000001c /* Number of entries in
++					     DT_MIPS_DELTA_RELOC.  */
++#define DT_MIPS_DELTA_SYM    0x7000001d /* Delta symbols that Delta
++					   relocations refer to.  */
++#define DT_MIPS_DELTA_SYM_NO 0x7000001e /* Number of entries in
++					   DT_MIPS_DELTA_SYM.  */
++#define DT_MIPS_DELTA_CLASSSYM 0x70000020 /* Delta symbols that hold the
++					     class declaration.  */
++#define DT_MIPS_DELTA_CLASSSYM_NO 0x70000021 /* Number of entries in
++						DT_MIPS_DELTA_CLASSSYM.  */
++#define DT_MIPS_CXX_FLAGS    0x70000022 /* Flags indicating for C++ flavor.  */
++#define DT_MIPS_PIXIE_INIT   0x70000023
++#define DT_MIPS_SYMBOL_LIB   0x70000024
++#define DT_MIPS_LOCALPAGE_GOTIDX 0x70000025
++#define DT_MIPS_LOCAL_GOTIDX 0x70000026
++#define DT_MIPS_HIDDEN_GOTIDX 0x70000027
++#define DT_MIPS_PROTECTED_GOTIDX 0x70000028
++#define DT_MIPS_OPTIONS	     0x70000029 /* Address of .options.  */
++#define DT_MIPS_INTERFACE    0x7000002a /* Address of .interface.  */
++#define DT_MIPS_DYNSTR_ALIGN 0x7000002b
++#define DT_MIPS_INTERFACE_SIZE 0x7000002c /* Size of the .interface section. */
++#define DT_MIPS_RLD_TEXT_RESOLVE_ADDR 0x7000002d /* Address of rld_text_rsolve
++						    function stored in GOT.  */
++#define DT_MIPS_PERF_SUFFIX  0x7000002e /* Default suffix of dso to be added
++					   by rld on dlopen() calls.  */
++#define DT_MIPS_COMPACT_SIZE 0x7000002f /* (O32)Size of compact rel section. */
++#define DT_MIPS_GP_VALUE     0x70000030 /* GP value for aux GOTs.  */
++#define DT_MIPS_AUX_DYNAMIC  0x70000031 /* Address of aux .dynamic.  */
++#define DT_MIPS_NUM	     0x32
++
++/* Legal values for DT_MIPS_FLAGS Elf32_Dyn entry.  */
++
++#define RHF_NONE		   0		/* No flags */
++#define RHF_QUICKSTART		   (1 << 0)	/* Use quickstart */
++#define RHF_NOTPOT		   (1 << 1)	/* Hash size not power of 2 */
++#define RHF_NO_LIBRARY_REPLACEMENT (1 << 2)	/* Ignore LD_LIBRARY_PATH */
++#define RHF_NO_MOVE		   (1 << 3)
++#define RHF_SGI_ONLY		   (1 << 4)
++#define RHF_GUARANTEE_INIT	   (1 << 5)
++#define RHF_DELTA_C_PLUS_PLUS	   (1 << 6)
++#define RHF_GUARANTEE_START_INIT   (1 << 7)
++#define RHF_PIXIE		   (1 << 8)
++#define RHF_DEFAULT_DELAY_LOAD	   (1 << 9)
++#define RHF_REQUICKSTART	   (1 << 10)
++#define RHF_REQUICKSTARTED	   (1 << 11)
++#define RHF_CORD		   (1 << 12)
++#define RHF_NO_UNRES_UNDEF	   (1 << 13)
++#define RHF_RLD_ORDER_SAFE	   (1 << 14)
++
++/* Entries found in sections of type SHT_MIPS_LIBLIST.  */
++
++typedef struct
++{
++  Elf32_Word l_name;		/* Name (string table index) */
++  Elf32_Word l_time_stamp;	/* Timestamp */
++  Elf32_Word l_checksum;	/* Checksum */
++  Elf32_Word l_version;		/* Interface version */
++  Elf32_Word l_flags;		/* Flags */
++} Elf32_Lib;
++
++typedef struct
++{
++  Elf64_Word l_name;		/* Name (string table index) */
++  Elf64_Word l_time_stamp;	/* Timestamp */
++  Elf64_Word l_checksum;	/* Checksum */
++  Elf64_Word l_version;		/* Interface version */
++  Elf64_Word l_flags;		/* Flags */
++} Elf64_Lib;
++
++
++/* Legal values for l_flags.  */
++
++#define LL_NONE		  0
++#define LL_EXACT_MATCH	  (1 << 0)	/* Require exact match */
++#define LL_IGNORE_INT_VER (1 << 1)	/* Ignore interface version */
++#define LL_REQUIRE_MINOR  (1 << 2)
++#define LL_EXPORTS	  (1 << 3)
++#define LL_DELAY_LOAD	  (1 << 4)
++#define LL_DELTA	  (1 << 5)
++
++/* Entries found in sections of type SHT_MIPS_CONFLICT.  */
++
++typedef Elf32_Addr Elf32_Conflict;
++
++
++/* HPPA specific definitions.  */
++
++/* Legal values for e_flags field of Elf32_Ehdr.  */
++
++#define EF_PARISC_TRAPNIL	0x00010000 /* Trap nil pointer dereference.  */
++#define EF_PARISC_EXT		0x00020000 /* Program uses arch. extensions. */
++#define EF_PARISC_LSB		0x00040000 /* Program expects little endian. */
++#define EF_PARISC_WIDE		0x00080000 /* Program expects wide mode.  */
++#define EF_PARISC_NO_KABP	0x00100000 /* No kernel assisted branch
++					      prediction.  */
++#define EF_PARISC_LAZYSWAP	0x00400000 /* Allow lazy swapping.  */
++#define EF_PARISC_ARCH		0x0000ffff /* Architecture version.  */
++
++/* Defined values for `e_flags & EF_PARISC_ARCH' are:  */
++
++#define EFA_PARISC_1_0		    0x020b /* PA-RISC 1.0 big-endian.  */
++#define EFA_PARISC_1_1		    0x0210 /* PA-RISC 1.1 big-endian.  */
++#define EFA_PARISC_2_0		    0x0214 /* PA-RISC 2.0 big-endian.  */
++
++/* Additional section indeces.  */
++
++#define SHN_PARISC_ANSI_COMMON	0xff00	   /* Section for tenatively declared
++					      symbols in ANSI C.  */
++#define SHN_PARISC_HUGE_COMMON	0xff01	   /* Common blocks in huge model.  */
++
++/* Legal values for sh_type field of Elf32_Shdr.  */
++
++#define SHT_PARISC_EXT		0x70000000 /* Contains product specific ext. */
++#define SHT_PARISC_UNWIND	0x70000001 /* Unwind information.  */
++#define SHT_PARISC_DOC		0x70000002 /* Debug info for optimized code. */
++
++/* Legal values for sh_flags field of Elf32_Shdr.  */
++
++#define SHF_PARISC_SHORT	0x20000000 /* Section with short addressing. */
++#define SHF_PARISC_HUGE		0x40000000 /* Section far from gp.  */
++#define SHF_PARISC_SBP		0x80000000 /* Static branch prediction code. */
++
++/* Legal values for ST_TYPE subfield of st_info (symbol type).  */
++
++#define STT_PARISC_MILLICODE	13	/* Millicode function entry point.  */
++
++#define STT_HP_OPAQUE		(STT_LOOS + 0x1)
++#define STT_HP_STUB		(STT_LOOS + 0x2)
++
++/* HPPA relocs.  */
++
++#define R_PARISC_NONE		0	/* No reloc.  */
++#define R_PARISC_DIR32		1	/* Direct 32-bit reference.  */
++#define R_PARISC_DIR21L		2	/* Left 21 bits of eff. address.  */
++#define R_PARISC_DIR17R		3	/* Right 17 bits of eff. address.  */
++#define R_PARISC_DIR17F		4	/* 17 bits of eff. address.  */
++#define R_PARISC_DIR14R		6	/* Right 14 bits of eff. address.  */
++#define R_PARISC_PCREL32	9	/* 32-bit rel. address.  */
++#define R_PARISC_PCREL21L	10	/* Left 21 bits of rel. address.  */
++#define R_PARISC_PCREL17R	11	/* Right 17 bits of rel. address.  */
++#define R_PARISC_PCREL17F	12	/* 17 bits of rel. address.  */
++#define R_PARISC_PCREL14R	14	/* Right 14 bits of rel. address.  */
++#define R_PARISC_DPREL21L	18	/* Left 21 bits of rel. address.  */
++#define R_PARISC_DPREL14R	22	/* Right 14 bits of rel. address.  */
++#define R_PARISC_GPREL21L	26	/* GP-relative, left 21 bits.  */
++#define R_PARISC_GPREL14R	30	/* GP-relative, right 14 bits.  */
++#define R_PARISC_LTOFF21L	34	/* LT-relative, left 21 bits.  */
++#define R_PARISC_LTOFF14R	38	/* LT-relative, right 14 bits.  */
++#define R_PARISC_SECREL32	41	/* 32 bits section rel. address.  */
++#define R_PARISC_SEGBASE	48	/* No relocation, set segment base.  */
++#define R_PARISC_SEGREL32	49	/* 32 bits segment rel. address.  */
++#define R_PARISC_PLTOFF21L	50	/* PLT rel. address, left 21 bits.  */
++#define R_PARISC_PLTOFF14R	54	/* PLT rel. address, right 14 bits.  */
++#define R_PARISC_LTOFF_FPTR32	57	/* 32 bits LT-rel. function pointer. */
++#define R_PARISC_LTOFF_FPTR21L	58	/* LT-rel. fct ptr, left 21 bits. */
++#define R_PARISC_LTOFF_FPTR14R	62	/* LT-rel. fct ptr, right 14 bits. */
++#define R_PARISC_FPTR64		64	/* 64 bits function address.  */
++#define R_PARISC_PLABEL32	65	/* 32 bits function address.  */
++#define R_PARISC_PCREL64	72	/* 64 bits PC-rel. address.  */
++#define R_PARISC_PCREL22F	74	/* 22 bits PC-rel. address.  */
++#define R_PARISC_PCREL14WR	75	/* PC-rel. address, right 14 bits.  */
++#define R_PARISC_PCREL14DR	76	/* PC rel. address, right 14 bits.  */
++#define R_PARISC_PCREL16F	77	/* 16 bits PC-rel. address.  */
++#define R_PARISC_PCREL16WF	78	/* 16 bits PC-rel. address.  */
++#define R_PARISC_PCREL16DF	79	/* 16 bits PC-rel. address.  */
++#define R_PARISC_DIR64		80	/* 64 bits of eff. address.  */
++#define R_PARISC_DIR14WR	83	/* 14 bits of eff. address.  */
++#define R_PARISC_DIR14DR	84	/* 14 bits of eff. address.  */
++#define R_PARISC_DIR16F		85	/* 16 bits of eff. address.  */
++#define R_PARISC_DIR16WF	86	/* 16 bits of eff. address.  */
++#define R_PARISC_DIR16DF	87	/* 16 bits of eff. address.  */
++#define R_PARISC_GPREL64	88	/* 64 bits of GP-rel. address.  */
++#define R_PARISC_GPREL14WR	91	/* GP-rel. address, right 14 bits.  */
++#define R_PARISC_GPREL14DR	92	/* GP-rel. address, right 14 bits.  */
++#define R_PARISC_GPREL16F	93	/* 16 bits GP-rel. address.  */
++#define R_PARISC_GPREL16WF	94	/* 16 bits GP-rel. address.  */
++#define R_PARISC_GPREL16DF	95	/* 16 bits GP-rel. address.  */
++#define R_PARISC_LTOFF64	96	/* 64 bits LT-rel. address.  */
++#define R_PARISC_LTOFF14WR	99	/* LT-rel. address, right 14 bits.  */
++#define R_PARISC_LTOFF14DR	100	/* LT-rel. address, right 14 bits.  */
++#define R_PARISC_LTOFF16F	101	/* 16 bits LT-rel. address.  */
++#define R_PARISC_LTOFF16WF	102	/* 16 bits LT-rel. address.  */
++#define R_PARISC_LTOFF16DF	103	/* 16 bits LT-rel. address.  */
++#define R_PARISC_SECREL64	104	/* 64 bits section rel. address.  */
++#define R_PARISC_SEGREL64	112	/* 64 bits segment rel. address.  */
++#define R_PARISC_PLTOFF14WR	115	/* PLT-rel. address, right 14 bits.  */
++#define R_PARISC_PLTOFF14DR	116	/* PLT-rel. address, right 14 bits.  */
++#define R_PARISC_PLTOFF16F	117	/* 16 bits LT-rel. address.  */
++#define R_PARISC_PLTOFF16WF	118	/* 16 bits PLT-rel. address.  */
++#define R_PARISC_PLTOFF16DF	119	/* 16 bits PLT-rel. address.  */
++#define R_PARISC_LTOFF_FPTR64	120	/* 64 bits LT-rel. function ptr.  */
++#define R_PARISC_LTOFF_FPTR14WR	123	/* LT-rel. fct. ptr., right 14 bits. */
++#define R_PARISC_LTOFF_FPTR14DR	124	/* LT-rel. fct. ptr., right 14 bits. */
++#define R_PARISC_LTOFF_FPTR16F	125	/* 16 bits LT-rel. function ptr.  */
++#define R_PARISC_LTOFF_FPTR16WF	126	/* 16 bits LT-rel. function ptr.  */
++#define R_PARISC_LTOFF_FPTR16DF	127	/* 16 bits LT-rel. function ptr.  */
++#define R_PARISC_LORESERVE	128
++#define R_PARISC_COPY		128	/* Copy relocation.  */
++#define R_PARISC_IPLT		129	/* Dynamic reloc, imported PLT */
++#define R_PARISC_EPLT		130	/* Dynamic reloc, exported PLT */
++#define R_PARISC_TPREL32	153	/* 32 bits TP-rel. address.  */
++#define R_PARISC_TPREL21L	154	/* TP-rel. address, left 21 bits.  */
++#define R_PARISC_TPREL14R	158	/* TP-rel. address, right 14 bits.  */
++#define R_PARISC_LTOFF_TP21L	162	/* LT-TP-rel. address, left 21 bits. */
++#define R_PARISC_LTOFF_TP14R	166	/* LT-TP-rel. address, right 14 bits.*/
++#define R_PARISC_LTOFF_TP14F	167	/* 14 bits LT-TP-rel. address.  */
++#define R_PARISC_TPREL64	216	/* 64 bits TP-rel. address.  */
++#define R_PARISC_TPREL14WR	219	/* TP-rel. address, right 14 bits.  */
++#define R_PARISC_TPREL14DR	220	/* TP-rel. address, right 14 bits.  */
++#define R_PARISC_TPREL16F	221	/* 16 bits TP-rel. address.  */
++#define R_PARISC_TPREL16WF	222	/* 16 bits TP-rel. address.  */
++#define R_PARISC_TPREL16DF	223	/* 16 bits TP-rel. address.  */
++#define R_PARISC_LTOFF_TP64	224	/* 64 bits LT-TP-rel. address.  */
++#define R_PARISC_LTOFF_TP14WR	227	/* LT-TP-rel. address, right 14 bits.*/
++#define R_PARISC_LTOFF_TP14DR	228	/* LT-TP-rel. address, right 14 bits.*/
++#define R_PARISC_LTOFF_TP16F	229	/* 16 bits LT-TP-rel. address.  */
++#define R_PARISC_LTOFF_TP16WF	230	/* 16 bits LT-TP-rel. address.  */
++#define R_PARISC_LTOFF_TP16DF	231	/* 16 bits LT-TP-rel. address.  */
++#define R_PARISC_HIRESERVE	255
++
++/* Legal values for p_type field of Elf32_Phdr/Elf64_Phdr.  */
++
++#define PT_HP_TLS		(PT_LOOS + 0x0)
++#define PT_HP_CORE_NONE		(PT_LOOS + 0x1)
++#define PT_HP_CORE_VERSION	(PT_LOOS + 0x2)
++#define PT_HP_CORE_KERNEL	(PT_LOOS + 0x3)
++#define PT_HP_CORE_COMM		(PT_LOOS + 0x4)
++#define PT_HP_CORE_PROC		(PT_LOOS + 0x5)
++#define PT_HP_CORE_LOADABLE	(PT_LOOS + 0x6)
++#define PT_HP_CORE_STACK	(PT_LOOS + 0x7)
++#define PT_HP_CORE_SHM		(PT_LOOS + 0x8)
++#define PT_HP_CORE_MMF		(PT_LOOS + 0x9)
++#define PT_HP_PARALLEL		(PT_LOOS + 0x10)
++#define PT_HP_FASTBIND		(PT_LOOS + 0x11)
++#define PT_HP_OPT_ANNOT		(PT_LOOS + 0x12)
++#define PT_HP_HSL_ANNOT		(PT_LOOS + 0x13)
++#define PT_HP_STACK		(PT_LOOS + 0x14)
++
++#define PT_PARISC_ARCHEXT	0x70000000
++#define PT_PARISC_UNWIND	0x70000001
++
++/* Legal values for p_flags field of Elf32_Phdr/Elf64_Phdr.  */
++
++#define PF_PARISC_SBP		0x08000000
++
++#define PF_HP_PAGE_SIZE		0x00100000
++#define PF_HP_FAR_SHARED	0x00200000
++#define PF_HP_NEAR_SHARED	0x00400000
++#define PF_HP_CODE		0x01000000
++#define PF_HP_MODIFY		0x02000000
++#define PF_HP_LAZYSWAP		0x04000000
++#define PF_HP_SBP		0x08000000
++
++
++/* Alpha specific definitions.  */
++
++/* Legal values for e_flags field of Elf64_Ehdr.  */
++
++#define EF_ALPHA_32BIT		1	/* All addresses must be < 2GB.  */
++#define EF_ALPHA_CANRELAX	2	/* Relocations for relaxing exist.  */
++
++/* Legal values for sh_type field of Elf64_Shdr.  */
++
++/* These two are primerily concerned with ECOFF debugging info.  */
++#define SHT_ALPHA_DEBUG		0x70000001
++#define SHT_ALPHA_REGINFO	0x70000002
++
++/* Legal values for sh_flags field of Elf64_Shdr.  */
++
++#define SHF_ALPHA_GPREL		0x10000000
++
++/* Legal values for st_other field of Elf64_Sym.  */
++#define STO_ALPHA_NOPV		0x80	/* No PV required.  */
++#define STO_ALPHA_STD_GPLOAD	0x88	/* PV only used for initial ldgp.  */
++
++/* Alpha relocs.  */
++
++#define R_ALPHA_NONE		0	/* No reloc */
++#define R_ALPHA_REFLONG		1	/* Direct 32 bit */
++#define R_ALPHA_REFQUAD		2	/* Direct 64 bit */
++#define R_ALPHA_GPREL32		3	/* GP relative 32 bit */
++#define R_ALPHA_LITERAL		4	/* GP relative 16 bit w/optimization */
++#define R_ALPHA_LITUSE		5	/* Optimization hint for LITERAL */
++#define R_ALPHA_GPDISP		6	/* Add displacement to GP */
++#define R_ALPHA_BRADDR		7	/* PC+4 relative 23 bit shifted */
++#define R_ALPHA_HINT		8	/* PC+4 relative 16 bit shifted */
++#define R_ALPHA_SREL16		9	/* PC relative 16 bit */
++#define R_ALPHA_SREL32		10	/* PC relative 32 bit */
++#define R_ALPHA_SREL64		11	/* PC relative 64 bit */
++#define R_ALPHA_GPRELHIGH	17	/* GP relative 32 bit, high 16 bits */
++#define R_ALPHA_GPRELLOW	18	/* GP relative 32 bit, low 16 bits */
++#define R_ALPHA_GPREL16		19	/* GP relative 16 bit */
++#define R_ALPHA_COPY		24	/* Copy symbol at runtime */
++#define R_ALPHA_GLOB_DAT	25	/* Create GOT entry */
++#define R_ALPHA_JMP_SLOT	26	/* Create PLT entry */
++#define R_ALPHA_RELATIVE	27	/* Adjust by program base */
++#define R_ALPHA_TLS_GD_HI	28
++#define R_ALPHA_TLSGD		29
++#define R_ALPHA_TLS_LDM		30
++#define R_ALPHA_DTPMOD64	31
++#define R_ALPHA_GOTDTPREL	32
++#define R_ALPHA_DTPREL64	33
++#define R_ALPHA_DTPRELHI	34
++#define R_ALPHA_DTPRELLO	35
++#define R_ALPHA_DTPREL16	36
++#define R_ALPHA_GOTTPREL	37
++#define R_ALPHA_TPREL64		38
++#define R_ALPHA_TPRELHI		39
++#define R_ALPHA_TPRELLO		40
++#define R_ALPHA_TPREL16		41
++/* Keep this the last entry.  */
++#define R_ALPHA_NUM		46
++
++/* Magic values of the LITUSE relocation addend.  */
++#define LITUSE_ALPHA_ADDR	0
++#define LITUSE_ALPHA_BASE	1
++#define LITUSE_ALPHA_BYTOFF	2
++#define LITUSE_ALPHA_JSR	3
++#define LITUSE_ALPHA_TLS_GD	4
++#define LITUSE_ALPHA_TLS_LDM	5
++
++
++/* PowerPC specific declarations */
++
++/* Values for Elf32/64_Ehdr.e_flags.  */
++#define EF_PPC_EMB		0x80000000	/* PowerPC embedded flag */
++
++/* Cygnus local bits below */
++#define EF_PPC_RELOCATABLE	0x00010000	/* PowerPC -mrelocatable flag*/
++#define EF_PPC_RELOCATABLE_LIB	0x00008000	/* PowerPC -mrelocatable-lib
++						   flag */
++
++/* PowerPC relocations defined by the ABIs */
++#define R_PPC_NONE		0
++#define R_PPC_ADDR32		1	/* 32bit absolute address */
++#define R_PPC_ADDR24		2	/* 26bit address, 2 bits ignored.  */
++#define R_PPC_ADDR16		3	/* 16bit absolute address */
++#define R_PPC_ADDR16_LO		4	/* lower 16bit of absolute address */
++#define R_PPC_ADDR16_HI		5	/* high 16bit of absolute address */
++#define R_PPC_ADDR16_HA		6	/* adjusted high 16bit */
++#define R_PPC_ADDR14		7	/* 16bit address, 2 bits ignored */
++#define R_PPC_ADDR14_BRTAKEN	8
++#define R_PPC_ADDR14_BRNTAKEN	9
++#define R_PPC_REL24		10	/* PC relative 26 bit */
++#define R_PPC_REL14		11	/* PC relative 16 bit */
++#define R_PPC_REL14_BRTAKEN	12
++#define R_PPC_REL14_BRNTAKEN	13
++#define R_PPC_GOT16		14
++#define R_PPC_GOT16_LO		15
++#define R_PPC_GOT16_HI		16
++#define R_PPC_GOT16_HA		17
++#define R_PPC_PLTREL24		18
++#define R_PPC_COPY		19
++#define R_PPC_GLOB_DAT		20
++#define R_PPC_JMP_SLOT		21
++#define R_PPC_RELATIVE		22
++#define R_PPC_LOCAL24PC		23
++#define R_PPC_UADDR32		24
++#define R_PPC_UADDR16		25
++#define R_PPC_REL32		26
++#define R_PPC_PLT32		27
++#define R_PPC_PLTREL32		28
++#define R_PPC_PLT16_LO		29
++#define R_PPC_PLT16_HI		30
++#define R_PPC_PLT16_HA		31
++#define R_PPC_SDAREL16		32
++#define R_PPC_SECTOFF		33
++#define R_PPC_SECTOFF_LO	34
++#define R_PPC_SECTOFF_HI	35
++#define R_PPC_SECTOFF_HA	36
++
++/* PowerPC relocations defined for the TLS access ABI.  */
++#define R_PPC_TLS		67 /* none	(sym+add)@tls */
++#define R_PPC_DTPMOD32		68 /* word32	(sym+add)@dtpmod */
++#define R_PPC_TPREL16		69 /* half16*	(sym+add)@tprel */
++#define R_PPC_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
++#define R_PPC_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
++#define R_PPC_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
++#define R_PPC_TPREL32		73 /* word32	(sym+add)@tprel */
++#define R_PPC_DTPREL16		74 /* half16*	(sym+add)@dtprel */
++#define R_PPC_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
++#define R_PPC_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
++#define R_PPC_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
++#define R_PPC_DTPREL32		78 /* word32	(sym+add)@dtprel */
++#define R_PPC_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
++#define R_PPC_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
++#define R_PPC_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
++#define R_PPC_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
++#define R_PPC_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
++#define R_PPC_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
++#define R_PPC_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
++#define R_PPC_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
++#define R_PPC_GOT_TPREL16	87 /* half16*	(sym+add)@got@tprel */
++#define R_PPC_GOT_TPREL16_LO	88 /* half16	(sym+add)@got@tprel@l */
++#define R_PPC_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
++#define R_PPC_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
++#define R_PPC_GOT_DTPREL16	91 /* half16*	(sym+add)@got@dtprel */
++#define R_PPC_GOT_DTPREL16_LO	92 /* half16*	(sym+add)@got@dtprel@l */
++#define R_PPC_GOT_DTPREL16_HI	93 /* half16*	(sym+add)@got@dtprel@h */
++#define R_PPC_GOT_DTPREL16_HA	94 /* half16*	(sym+add)@got@dtprel@ha */
++
++/* Keep this the last entry.  */
++#define R_PPC_NUM		95
++
++/* The remaining relocs are from the Embedded ELF ABI, and are not
++   in the SVR4 ELF ABI.  */
++#define R_PPC_EMB_NADDR32	101
++#define R_PPC_EMB_NADDR16	102
++#define R_PPC_EMB_NADDR16_LO	103
++#define R_PPC_EMB_NADDR16_HI	104
++#define R_PPC_EMB_NADDR16_HA	105
++#define R_PPC_EMB_SDAI16	106
++#define R_PPC_EMB_SDA2I16	107
++#define R_PPC_EMB_SDA2REL	108
++#define R_PPC_EMB_SDA21		109	/* 16 bit offset in SDA */
++#define R_PPC_EMB_MRKREF	110
++#define R_PPC_EMB_RELSEC16	111
++#define R_PPC_EMB_RELST_LO	112
++#define R_PPC_EMB_RELST_HI	113
++#define R_PPC_EMB_RELST_HA	114
++#define R_PPC_EMB_BIT_FLD	115
++#define R_PPC_EMB_RELSDA	116	/* 16 bit relative offset in SDA */
++
++/* Diab tool relocations.  */
++#define R_PPC_DIAB_SDA21_LO	180	/* like EMB_SDA21, but lower 16 bit */
++#define R_PPC_DIAB_SDA21_HI	181	/* like EMB_SDA21, but high 16 bit */
++#define R_PPC_DIAB_SDA21_HA	182	/* like EMB_SDA21, adjusted high 16 */
++#define R_PPC_DIAB_RELSDA_LO	183	/* like EMB_RELSDA, but lower 16 bit */
++#define R_PPC_DIAB_RELSDA_HI	184	/* like EMB_RELSDA, but high 16 bit */
++#define R_PPC_DIAB_RELSDA_HA	185	/* like EMB_RELSDA, adjusted high 16 */
++
++/* This is a phony reloc to handle any old fashioned TOC16 references
++   that may still be in object files.  */
++#define R_PPC_TOC16		255
++
++
++/* PowerPC64 relocations defined by the ABIs */
++#define R_PPC64_NONE		R_PPC_NONE
++#define R_PPC64_ADDR32		R_PPC_ADDR32 /* 32bit absolute address */
++#define R_PPC64_ADDR24		R_PPC_ADDR24 /* 26bit address, word aligned */
++#define R_PPC64_ADDR16		R_PPC_ADDR16 /* 16bit absolute address */
++#define R_PPC64_ADDR16_LO	R_PPC_ADDR16_LO	/* lower 16bits of address */
++#define R_PPC64_ADDR16_HI	R_PPC_ADDR16_HI	/* high 16bits of address. */
++#define R_PPC64_ADDR16_HA	R_PPC_ADDR16_HA /* adjusted high 16bits.  */
++#define R_PPC64_ADDR14		R_PPC_ADDR14 /* 16bit address, word aligned */
++#define R_PPC64_ADDR14_BRTAKEN	R_PPC_ADDR14_BRTAKEN
++#define R_PPC64_ADDR14_BRNTAKEN	R_PPC_ADDR14_BRNTAKEN
++#define R_PPC64_REL24		R_PPC_REL24 /* PC-rel. 26 bit, word aligned */
++#define R_PPC64_REL14		R_PPC_REL14 /* PC relative 16 bit */
++#define R_PPC64_REL14_BRTAKEN	R_PPC_REL14_BRTAKEN
++#define R_PPC64_REL14_BRNTAKEN	R_PPC_REL14_BRNTAKEN
++#define R_PPC64_GOT16		R_PPC_GOT16
++#define R_PPC64_GOT16_LO	R_PPC_GOT16_LO
++#define R_PPC64_GOT16_HI	R_PPC_GOT16_HI
++#define R_PPC64_GOT16_HA	R_PPC_GOT16_HA
++
++#define R_PPC64_COPY		R_PPC_COPY
++#define R_PPC64_GLOB_DAT	R_PPC_GLOB_DAT
++#define R_PPC64_JMP_SLOT	R_PPC_JMP_SLOT
++#define R_PPC64_RELATIVE	R_PPC_RELATIVE
++
++#define R_PPC64_UADDR32		R_PPC_UADDR32
++#define R_PPC64_UADDR16		R_PPC_UADDR16
++#define R_PPC64_REL32		R_PPC_REL32
++#define R_PPC64_PLT32		R_PPC_PLT32
++#define R_PPC64_PLTREL32	R_PPC_PLTREL32
++#define R_PPC64_PLT16_LO	R_PPC_PLT16_LO
++#define R_PPC64_PLT16_HI	R_PPC_PLT16_HI
++#define R_PPC64_PLT16_HA	R_PPC_PLT16_HA
++
++#define R_PPC64_SECTOFF		R_PPC_SECTOFF
++#define R_PPC64_SECTOFF_LO	R_PPC_SECTOFF_LO
++#define R_PPC64_SECTOFF_HI	R_PPC_SECTOFF_HI
++#define R_PPC64_SECTOFF_HA	R_PPC_SECTOFF_HA
++#define R_PPC64_ADDR30		37 /* word30 (S + A - P) >> 2 */
++#define R_PPC64_ADDR64		38 /* doubleword64 S + A */
++#define R_PPC64_ADDR16_HIGHER	39 /* half16 #higher(S + A) */
++#define R_PPC64_ADDR16_HIGHERA	40 /* half16 #highera(S + A) */
++#define R_PPC64_ADDR16_HIGHEST	41 /* half16 #highest(S + A) */
++#define R_PPC64_ADDR16_HIGHESTA	42 /* half16 #highesta(S + A) */
++#define R_PPC64_UADDR64		43 /* doubleword64 S + A */
++#define R_PPC64_REL64		44 /* doubleword64 S + A - P */
++#define R_PPC64_PLT64		45 /* doubleword64 L + A */
++#define R_PPC64_PLTREL64	46 /* doubleword64 L + A - P */
++#define R_PPC64_TOC16		47 /* half16* S + A - .TOC */
++#define R_PPC64_TOC16_LO	48 /* half16 #lo(S + A - .TOC.) */
++#define R_PPC64_TOC16_HI	49 /* half16 #hi(S + A - .TOC.) */
++#define R_PPC64_TOC16_HA	50 /* half16 #ha(S + A - .TOC.) */
++#define R_PPC64_TOC		51 /* doubleword64 .TOC */
++#define R_PPC64_PLTGOT16	52 /* half16* M + A */
++#define R_PPC64_PLTGOT16_LO	53 /* half16 #lo(M + A) */
++#define R_PPC64_PLTGOT16_HI	54 /* half16 #hi(M + A) */
++#define R_PPC64_PLTGOT16_HA	55 /* half16 #ha(M + A) */
++
++#define R_PPC64_ADDR16_DS	56 /* half16ds* (S + A) >> 2 */
++#define R_PPC64_ADDR16_LO_DS	57 /* half16ds  #lo(S + A) >> 2 */
++#define R_PPC64_GOT16_DS	58 /* half16ds* (G + A) >> 2 */
++#define R_PPC64_GOT16_LO_DS	59 /* half16ds  #lo(G + A) >> 2 */
++#define R_PPC64_PLT16_LO_DS	60 /* half16ds  #lo(L + A) >> 2 */
++#define R_PPC64_SECTOFF_DS	61 /* half16ds* (R + A) >> 2 */
++#define R_PPC64_SECTOFF_LO_DS	62 /* half16ds  #lo(R + A) >> 2 */
++#define R_PPC64_TOC16_DS	63 /* half16ds* (S + A - .TOC.) >> 2 */
++#define R_PPC64_TOC16_LO_DS	64 /* half16ds  #lo(S + A - .TOC.) >> 2 */
++#define R_PPC64_PLTGOT16_DS	65 /* half16ds* (M + A) >> 2 */
++#define R_PPC64_PLTGOT16_LO_DS	66 /* half16ds  #lo(M + A) >> 2 */
++
++/* PowerPC64 relocations defined for the TLS access ABI.  */
++#define R_PPC64_TLS		67 /* none	(sym+add)@tls */
++#define R_PPC64_DTPMOD64	68 /* doubleword64 (sym+add)@dtpmod */
++#define R_PPC64_TPREL16		69 /* half16*	(sym+add)@tprel */
++#define R_PPC64_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
++#define R_PPC64_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
++#define R_PPC64_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
++#define R_PPC64_TPREL64		73 /* doubleword64 (sym+add)@tprel */
++#define R_PPC64_DTPREL16	74 /* half16*	(sym+add)@dtprel */
++#define R_PPC64_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
++#define R_PPC64_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
++#define R_PPC64_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
++#define R_PPC64_DTPREL64	78 /* doubleword64 (sym+add)@dtprel */
++#define R_PPC64_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
++#define R_PPC64_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
++#define R_PPC64_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
++#define R_PPC64_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
++#define R_PPC64_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
++#define R_PPC64_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
++#define R_PPC64_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
++#define R_PPC64_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
++#define R_PPC64_GOT_TPREL16_DS	87 /* half16ds*	(sym+add)@got@tprel */
++#define R_PPC64_GOT_TPREL16_LO_DS 88 /* half16ds (sym+add)@got@tprel@l */
++#define R_PPC64_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
++#define R_PPC64_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
++#define R_PPC64_GOT_DTPREL16_DS	91 /* half16ds*	(sym+add)@got@dtprel */
++#define R_PPC64_GOT_DTPREL16_LO_DS 92 /* half16ds (sym+add)@got@dtprel@l */
++#define R_PPC64_GOT_DTPREL16_HI	93 /* half16	(sym+add)@got@dtprel@h */
++#define R_PPC64_GOT_DTPREL16_HA	94 /* half16	(sym+add)@got@dtprel@ha */
++#define R_PPC64_TPREL16_DS	95 /* half16ds*	(sym+add)@tprel */
++#define R_PPC64_TPREL16_LO_DS	96 /* half16ds	(sym+add)@tprel@l */
++#define R_PPC64_TPREL16_HIGHER	97 /* half16	(sym+add)@tprel@higher */
++#define R_PPC64_TPREL16_HIGHERA	98 /* half16	(sym+add)@tprel@highera */
++#define R_PPC64_TPREL16_HIGHEST	99 /* half16	(sym+add)@tprel@highest */
++#define R_PPC64_TPREL16_HIGHESTA 100 /* half16	(sym+add)@tprel@highesta */
++#define R_PPC64_DTPREL16_DS	101 /* half16ds* (sym+add)@dtprel */
++#define R_PPC64_DTPREL16_LO_DS	102 /* half16ds	(sym+add)@dtprel@l */
++#define R_PPC64_DTPREL16_HIGHER	103 /* half16	(sym+add)@dtprel@higher */
++#define R_PPC64_DTPREL16_HIGHERA 104 /* half16	(sym+add)@dtprel@highera */
++#define R_PPC64_DTPREL16_HIGHEST 105 /* half16	(sym+add)@dtprel@highest */
++#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16	(sym+add)@dtprel@highesta */
++
++/* Keep this the last entry.  */
++#define R_PPC64_NUM		107
++
++/* PowerPC64 specific values for the Dyn d_tag field.  */
++#define DT_PPC64_GLINK  (DT_LOPROC + 0)
++#define DT_PPC64_NUM    1
++
++
++/* ARM specific declarations */
++
++/* Processor specific flags for the ELF header e_flags field.  */
++#define EF_ARM_RELEXEC     0x01
++#define EF_ARM_HASENTRY    0x02
++#define EF_ARM_INTERWORK   0x04
++#define EF_ARM_APCS_26     0x08
++#define EF_ARM_APCS_FLOAT  0x10
++#define EF_ARM_PIC         0x20
++#define EF_ARM_ALIGN8      0x40		/* 8-bit structure alignment is in use */
++#define EF_ARM_NEW_ABI     0x80
++#define EF_ARM_OLD_ABI     0x100
++
++/* Other constants defined in the ARM ELF spec. version B-01.  */
++/* NB. These conflict with values defined above.  */
++#define EF_ARM_SYMSARESORTED	0x04
++#define EF_ARM_DYNSYMSUSESEGIDX 0x08
++#define EF_ARM_MAPSYMSFIRST	0x10
++#define EF_ARM_EABIMASK		0XFF000000
++
++#define EF_ARM_EABI_VERSION(flags) ((flags) & EF_ARM_EABIMASK)
++#define EF_ARM_EABI_UNKNOWN  0x00000000
++#define EF_ARM_EABI_VER1     0x01000000
++#define EF_ARM_EABI_VER2     0x02000000
++
++/* Additional symbol types for Thumb */
++#define STT_ARM_TFUNC      0xd
++
++/* ARM-specific values for sh_flags */
++#define SHF_ARM_ENTRYSECT  0x10000000   /* Section contains an entry point */
++#define SHF_ARM_COMDEF     0x80000000   /* Section may be multiply defined
++					   in the input to a link step */
++
++/* ARM-specific program header flags */
++#define PF_ARM_SB          0x10000000   /* Segment contains the location
++					   addressed by the static base */
++
++/* ARM relocs.  */
++#define R_ARM_NONE		0	/* No reloc */
++#define R_ARM_PC24		1	/* PC relative 26 bit branch */
++#define R_ARM_ABS32		2	/* Direct 32 bit  */
++#define R_ARM_REL32		3	/* PC relative 32 bit */
++#define R_ARM_PC13		4
++#define R_ARM_ABS16		5	/* Direct 16 bit */
++#define R_ARM_ABS12		6	/* Direct 12 bit */
++#define R_ARM_THM_ABS5		7
++#define R_ARM_ABS8		8	/* Direct 8 bit */
++#define R_ARM_SBREL32		9
++#define R_ARM_THM_PC22		10
++#define R_ARM_THM_PC8		11
++#define R_ARM_AMP_VCALL9	12
++#define R_ARM_SWI24		13
++#define R_ARM_THM_SWI8		14
++#define R_ARM_XPC25		15
++#define R_ARM_THM_XPC22		16
++#define R_ARM_COPY		20	/* Copy symbol at runtime */
++#define R_ARM_GLOB_DAT		21	/* Create GOT entry */
++#define R_ARM_JUMP_SLOT		22	/* Create PLT entry */
++#define R_ARM_RELATIVE		23	/* Adjust by program base */
++#define R_ARM_GOTOFF		24	/* 32 bit offset to GOT */
++#define R_ARM_GOTPC		25	/* 32 bit PC relative offset to GOT */
++#define R_ARM_GOT32		26	/* 32 bit GOT entry */
++#define R_ARM_PLT32		27	/* 32 bit PLT address */
++#define R_ARM_ALU_PCREL_7_0	32
++#define R_ARM_ALU_PCREL_15_8	33
++#define R_ARM_ALU_PCREL_23_15	34
++#define R_ARM_LDR_SBREL_11_0	35
++#define R_ARM_ALU_SBREL_19_12	36
++#define R_ARM_ALU_SBREL_27_20	37
++#define R_ARM_GNU_VTENTRY	100
++#define R_ARM_GNU_VTINHERIT	101
++#define R_ARM_THM_PC11		102	/* thumb unconditional branch */
++#define R_ARM_THM_PC9		103	/* thumb conditional branch */
++#define R_ARM_RXPC25		249
++#define R_ARM_RSBREL32		250
++#define R_ARM_THM_RPC22		251
++#define R_ARM_RREL32		252
++#define R_ARM_RABS22		253
++#define R_ARM_RPC24		254
++#define R_ARM_RBASE		255
++/* Keep this the last entry.  */
++#define R_ARM_NUM		256
++
++/* IA-64 specific declarations.  */
++
++/* Processor specific flags for the Ehdr e_flags field.  */
++#define EF_IA_64_MASKOS		0x0000000f	/* os-specific flags */
++#define EF_IA_64_ABI64		0x00000010	/* 64-bit ABI */
++#define EF_IA_64_ARCH		0xff000000	/* arch. version mask */
++
++/* Processor specific values for the Phdr p_type field.  */
++#define PT_IA_64_ARCHEXT	(PT_LOPROC + 0)	/* arch extension bits */
++#define PT_IA_64_UNWIND		(PT_LOPROC + 1)	/* ia64 unwind bits */
++
++/* Processor specific flags for the Phdr p_flags field.  */
++#define PF_IA_64_NORECOV	0x80000000	/* spec insns w/o recovery */
++
++/* Processor specific values for the Shdr sh_type field.  */
++#define SHT_IA_64_EXT		(SHT_LOPROC + 0) /* extension bits */
++#define SHT_IA_64_UNWIND	(SHT_LOPROC + 1) /* unwind bits */
++
++/* Processor specific flags for the Shdr sh_flags field.  */
++#define SHF_IA_64_SHORT		0x10000000	/* section near gp */
++#define SHF_IA_64_NORECOV	0x20000000	/* spec insns w/o recovery */
++
++/* Processor specific values for the Dyn d_tag field.  */
++#define DT_IA_64_PLT_RESERVE	(DT_LOPROC + 0)
++#define DT_IA_64_NUM		1
++
++/* IA-64 relocations.  */
++#define R_IA64_NONE		0x00	/* none */
++#define R_IA64_IMM14		0x21	/* symbol + addend, add imm14 */
++#define R_IA64_IMM22		0x22	/* symbol + addend, add imm22 */
++#define R_IA64_IMM64		0x23	/* symbol + addend, mov imm64 */
++#define R_IA64_DIR32MSB		0x24	/* symbol + addend, data4 MSB */
++#define R_IA64_DIR32LSB		0x25	/* symbol + addend, data4 LSB */
++#define R_IA64_DIR64MSB		0x26	/* symbol + addend, data8 MSB */
++#define R_IA64_DIR64LSB		0x27	/* symbol + addend, data8 LSB */
++#define R_IA64_GPREL22		0x2a	/* @gprel(sym + add), add imm22 */
++#define R_IA64_GPREL64I		0x2b	/* @gprel(sym + add), mov imm64 */
++#define R_IA64_GPREL32MSB	0x2c	/* @gprel(sym + add), data4 MSB */
++#define R_IA64_GPREL32LSB	0x2d	/* @gprel(sym + add), data4 LSB */
++#define R_IA64_GPREL64MSB	0x2e	/* @gprel(sym + add), data8 MSB */
++#define R_IA64_GPREL64LSB	0x2f	/* @gprel(sym + add), data8 LSB */
++#define R_IA64_LTOFF22		0x32	/* @ltoff(sym + add), add imm22 */
++#define R_IA64_LTOFF64I		0x33	/* @ltoff(sym + add), mov imm64 */
++#define R_IA64_PLTOFF22		0x3a	/* @pltoff(sym + add), add imm22 */
++#define R_IA64_PLTOFF64I	0x3b	/* @pltoff(sym + add), mov imm64 */
++#define R_IA64_PLTOFF64MSB	0x3e	/* @pltoff(sym + add), data8 MSB */
++#define R_IA64_PLTOFF64LSB	0x3f	/* @pltoff(sym + add), data8 LSB */
++#define R_IA64_FPTR64I		0x43	/* @fptr(sym + add), mov imm64 */
++#define R_IA64_FPTR32MSB	0x44	/* @fptr(sym + add), data4 MSB */
++#define R_IA64_FPTR32LSB	0x45	/* @fptr(sym + add), data4 LSB */
++#define R_IA64_FPTR64MSB	0x46	/* @fptr(sym + add), data8 MSB */
++#define R_IA64_FPTR64LSB	0x47	/* @fptr(sym + add), data8 LSB */
++#define R_IA64_PCREL60B		0x48	/* @pcrel(sym + add), brl */
++#define R_IA64_PCREL21B		0x49	/* @pcrel(sym + add), ptb, call */
++#define R_IA64_PCREL21M		0x4a	/* @pcrel(sym + add), chk.s */
++#define R_IA64_PCREL21F		0x4b	/* @pcrel(sym + add), fchkf */
++#define R_IA64_PCREL32MSB	0x4c	/* @pcrel(sym + add), data4 MSB */
++#define R_IA64_PCREL32LSB	0x4d	/* @pcrel(sym + add), data4 LSB */
++#define R_IA64_PCREL64MSB	0x4e	/* @pcrel(sym + add), data8 MSB */
++#define R_IA64_PCREL64LSB	0x4f	/* @pcrel(sym + add), data8 LSB */
++#define R_IA64_LTOFF_FPTR22	0x52	/* @ltoff(@fptr(s+a)), imm22 */
++#define R_IA64_LTOFF_FPTR64I	0x53	/* @ltoff(@fptr(s+a)), imm64 */
++#define R_IA64_LTOFF_FPTR32MSB	0x54	/* @ltoff(@fptr(s+a)), data4 MSB */
++#define R_IA64_LTOFF_FPTR32LSB	0x55	/* @ltoff(@fptr(s+a)), data4 LSB */
++#define R_IA64_LTOFF_FPTR64MSB	0x56	/* @ltoff(@fptr(s+a)), data8 MSB */
++#define R_IA64_LTOFF_FPTR64LSB	0x57	/* @ltoff(@fptr(s+a)), data8 LSB */
++#define R_IA64_SEGREL32MSB	0x5c	/* @segrel(sym + add), data4 MSB */
++#define R_IA64_SEGREL32LSB	0x5d	/* @segrel(sym + add), data4 LSB */
++#define R_IA64_SEGREL64MSB	0x5e	/* @segrel(sym + add), data8 MSB */
++#define R_IA64_SEGREL64LSB	0x5f	/* @segrel(sym + add), data8 LSB */
++#define R_IA64_SECREL32MSB	0x64	/* @secrel(sym + add), data4 MSB */
++#define R_IA64_SECREL32LSB	0x65	/* @secrel(sym + add), data4 LSB */
++#define R_IA64_SECREL64MSB	0x66	/* @secrel(sym + add), data8 MSB */
++#define R_IA64_SECREL64LSB	0x67	/* @secrel(sym + add), data8 LSB */
++#define R_IA64_REL32MSB		0x6c	/* data 4 + REL */
++#define R_IA64_REL32LSB		0x6d	/* data 4 + REL */
++#define R_IA64_REL64MSB		0x6e	/* data 8 + REL */
++#define R_IA64_REL64LSB		0x6f	/* data 8 + REL */
++#define R_IA64_LTV32MSB		0x74	/* symbol + addend, data4 MSB */
++#define R_IA64_LTV32LSB		0x75	/* symbol + addend, data4 LSB */
++#define R_IA64_LTV64MSB		0x76	/* symbol + addend, data8 MSB */
++#define R_IA64_LTV64LSB		0x77	/* symbol + addend, data8 LSB */
++#define R_IA64_PCREL21BI	0x79	/* @pcrel(sym + add), 21bit inst */
++#define R_IA64_PCREL22		0x7a	/* @pcrel(sym + add), 22bit inst */
++#define R_IA64_PCREL64I		0x7b	/* @pcrel(sym + add), 64bit inst */
++#define R_IA64_IPLTMSB		0x80	/* dynamic reloc, imported PLT, MSB */
++#define R_IA64_IPLTLSB		0x81	/* dynamic reloc, imported PLT, LSB */
++#define R_IA64_COPY		0x84	/* copy relocation */
++#define R_IA64_SUB		0x85	/* Addend and symbol difference */
++#define R_IA64_LTOFF22X		0x86	/* LTOFF22, relaxable.  */
++#define R_IA64_LDXMOV		0x87	/* Use of LTOFF22X.  */
++#define R_IA64_TPREL14		0x91	/* @tprel(sym + add), imm14 */
++#define R_IA64_TPREL22		0x92	/* @tprel(sym + add), imm22 */
++#define R_IA64_TPREL64I		0x93	/* @tprel(sym + add), imm64 */
++#define R_IA64_TPREL64MSB	0x96	/* @tprel(sym + add), data8 MSB */
++#define R_IA64_TPREL64LSB	0x97	/* @tprel(sym + add), data8 LSB */
++#define R_IA64_LTOFF_TPREL22	0x9a	/* @ltoff(@tprel(s+a)), imm2 */
++#define R_IA64_DTPMOD64MSB	0xa6	/* @dtpmod(sym + add), data8 MSB */
++#define R_IA64_DTPMOD64LSB	0xa7	/* @dtpmod(sym + add), data8 LSB */
++#define R_IA64_LTOFF_DTPMOD22	0xaa	/* @ltoff(@dtpmod(sym + add)), imm22 */
++#define R_IA64_DTPREL14		0xb1	/* @dtprel(sym + add), imm14 */
++#define R_IA64_DTPREL22		0xb2	/* @dtprel(sym + add), imm22 */
++#define R_IA64_DTPREL64I	0xb3	/* @dtprel(sym + add), imm64 */
++#define R_IA64_DTPREL32MSB	0xb4	/* @dtprel(sym + add), data4 MSB */
++#define R_IA64_DTPREL32LSB	0xb5	/* @dtprel(sym + add), data4 LSB */
++#define R_IA64_DTPREL64MSB	0xb6	/* @dtprel(sym + add), data8 MSB */
++#define R_IA64_DTPREL64LSB	0xb7	/* @dtprel(sym + add), data8 LSB */
++#define R_IA64_LTOFF_DTPREL22	0xba	/* @ltoff(@dtprel(s+a)), imm22 */
++
++/* SH specific declarations */
++
++/* SH relocs.  */
++#define	R_SH_NONE		0
++#define	R_SH_DIR32		1
++#define	R_SH_REL32		2
++#define	R_SH_DIR8WPN		3
++#define	R_SH_IND12W		4
++#define	R_SH_DIR8WPL		5
++#define	R_SH_DIR8WPZ		6
++#define	R_SH_DIR8BP		7
++#define	R_SH_DIR8W		8
++#define	R_SH_DIR8L		9
++#define	R_SH_SWITCH16		25
++#define	R_SH_SWITCH32		26
++#define	R_SH_USES		27
++#define	R_SH_COUNT		28
++#define	R_SH_ALIGN		29
++#define	R_SH_CODE		30
++#define	R_SH_DATA		31
++#define	R_SH_LABEL		32
++#define	R_SH_SWITCH8		33
++#define	R_SH_GNU_VTINHERIT	34
++#define	R_SH_GNU_VTENTRY	35
++#define	R_SH_TLS_GD_32		144
++#define	R_SH_TLS_LD_32		145
++#define	R_SH_TLS_LDO_32		146
++#define	R_SH_TLS_IE_32		147
++#define	R_SH_TLS_LE_32		148
++#define	R_SH_TLS_DTPMOD32	149
++#define	R_SH_TLS_DTPOFF32	150
++#define	R_SH_TLS_TPOFF32	151
++#define	R_SH_GOT32		160
++#define	R_SH_PLT32		161
++#define	R_SH_COPY		162
++#define	R_SH_GLOB_DAT		163
++#define	R_SH_JMP_SLOT		164
++#define	R_SH_RELATIVE		165
++#define	R_SH_GOTOFF		166
++#define	R_SH_GOTPC		167
++/* Keep this the last entry.  */
++#define	R_SH_NUM		256
++
++/* Additional s390 relocs */
++
++#define R_390_NONE		0	/* No reloc.  */
++#define R_390_8			1	/* Direct 8 bit.  */
++#define R_390_12		2	/* Direct 12 bit.  */
++#define R_390_16		3	/* Direct 16 bit.  */
++#define R_390_32		4	/* Direct 32 bit.  */
++#define R_390_PC32		5	/* PC relative 32 bit.	*/
++#define R_390_GOT12		6	/* 12 bit GOT offset.  */
++#define R_390_GOT32		7	/* 32 bit GOT offset.  */
++#define R_390_PLT32		8	/* 32 bit PC relative PLT address.  */
++#define R_390_COPY		9	/* Copy symbol at runtime.  */
++#define R_390_GLOB_DAT		10	/* Create GOT entry.  */
++#define R_390_JMP_SLOT		11	/* Create PLT entry.  */
++#define R_390_RELATIVE		12	/* Adjust by program base.  */
++#define R_390_GOTOFF32		13	/* 32 bit offset to GOT.	 */
++#define R_390_GOTPC		14	/* 32 bit PC relative offset to GOT.  */
++#define R_390_GOT16		15	/* 16 bit GOT offset.  */
++#define R_390_PC16		16	/* PC relative 16 bit.	*/
++#define R_390_PC16DBL		17	/* PC relative 16 bit shifted by 1.  */
++#define R_390_PLT16DBL		18	/* 16 bit PC rel. PLT shifted by 1.  */
++#define R_390_PC32DBL		19	/* PC relative 32 bit shifted by 1.  */
++#define R_390_PLT32DBL		20	/* 32 bit PC rel. PLT shifted by 1.  */
++#define R_390_GOTPCDBL		21	/* 32 bit PC rel. GOT shifted by 1.  */
++#define R_390_64		22	/* Direct 64 bit.  */
++#define R_390_PC64		23	/* PC relative 64 bit.	*/
++#define R_390_GOT64		24	/* 64 bit GOT offset.  */
++#define R_390_PLT64		25	/* 64 bit PC relative PLT address.  */
++#define R_390_GOTENT		26	/* 32 bit PC rel. to GOT entry >> 1. */
++#define R_390_GOTOFF16		27	/* 16 bit offset to GOT. */
++#define R_390_GOTOFF64		28	/* 64 bit offset to GOT. */
++#define R_390_GOTPLT12		29	/* 12 bit offset to jump slot.	*/
++#define R_390_GOTPLT16		30	/* 16 bit offset to jump slot.	*/
++#define R_390_GOTPLT32		31	/* 32 bit offset to jump slot.	*/
++#define R_390_GOTPLT64		32	/* 64 bit offset to jump slot.	*/
++#define R_390_GOTPLTENT		33	/* 32 bit rel. offset to jump slot.  */
++#define R_390_PLTOFF16		34	/* 16 bit offset from GOT to PLT. */
++#define R_390_PLTOFF32		35	/* 32 bit offset from GOT to PLT. */
++#define R_390_PLTOFF64		36	/* 16 bit offset from GOT to PLT. */
++#define R_390_TLS_LOAD		37	/* Tag for load insn in TLS code.  */
++#define R_390_TLS_GDCALL	38	/* Tag for function call in general
++					   dynamic TLS code. */
++#define R_390_TLS_LDCALL	39	/* Tag for function call in local
++					   dynamic TLS code. */
++#define R_390_TLS_GD32		40	/* Direct 32 bit for general dynamic
++					   thread local data.  */
++#define R_390_TLS_GD64		41	/* Direct 64 bit for general dynamic
++					  thread local data.  */
++#define R_390_TLS_GOTIE12	42	/* 12 bit GOT offset for static TLS
++					   block offset.  */
++#define R_390_TLS_GOTIE32	43	/* 32 bit GOT offset for static TLS
++					   block offset.  */
++#define R_390_TLS_GOTIE64	44	/* 64 bit GOT offset for static TLS
++					   block offset. */
++#define R_390_TLS_LDM32		45	/* Direct 32 bit for local dynamic
++					   thread local data in LE code.  */
++#define R_390_TLS_LDM64		46	/* Direct 64 bit for local dynamic
++					   thread local data in LE code.  */
++#define R_390_TLS_IE32		47	/* 32 bit address of GOT entry for
++					   negated static TLS block offset.  */
++#define R_390_TLS_IE64		48	/* 64 bit address of GOT entry for
++					   negated static TLS block offset.  */
++#define R_390_TLS_IEENT		49	/* 32 bit rel. offset to GOT entry for
++					   negated static TLS block offset.  */
++#define R_390_TLS_LE32		50	/* 32 bit negated offset relative to
++					   static TLS block.  */
++#define R_390_TLS_LE64		51	/* 64 bit negated offset relative to
++					   static TLS block.  */
++#define R_390_TLS_LDO32		52	/* 32 bit offset relative to TLS
++					   block.  */
++#define R_390_TLS_LDO64		53	/* 64 bit offset relative to TLS
++					   block.  */
++#define R_390_TLS_DTPMOD	54	/* ID of module containing symbol.  */
++#define R_390_TLS_DTPOFF	55	/* Offset in TLS block.	 */
++#define R_390_TLS_TPOFF		56	/* Negated offset in static TLS
++					   block.  */
++
++/* Keep this the last entry.  */
++#define R_390_NUM		57
++
++/* CRIS relocations.  */
++#define R_CRIS_NONE		0
++#define R_CRIS_8		1
++#define R_CRIS_16		2
++#define R_CRIS_32		3
++#define R_CRIS_8_PCREL		4
++#define R_CRIS_16_PCREL		5
++#define R_CRIS_32_PCREL		6
++#define R_CRIS_GNU_VTINHERIT	7
++#define R_CRIS_GNU_VTENTRY	8
++#define R_CRIS_COPY		9
++#define R_CRIS_GLOB_DAT		10
++#define R_CRIS_JUMP_SLOT	11
++#define R_CRIS_RELATIVE		12
++#define R_CRIS_16_GOT		13
++#define R_CRIS_32_GOT		14
++#define R_CRIS_16_GOTPLT	15
++#define R_CRIS_32_GOTPLT	16
++#define R_CRIS_32_GOTREL	17
++#define R_CRIS_32_PLT_GOTREL	18
++#define R_CRIS_32_PLT_PCREL	19
++
++#define R_CRIS_NUM		20
++
++/* AMD x86-64 relocations.  */
++#define R_X86_64_NONE		0	/* No reloc */
++#define R_X86_64_64		1	/* Direct 64 bit  */
++#define R_X86_64_PC32		2	/* PC relative 32 bit signed */
++#define R_X86_64_GOT32		3	/* 32 bit GOT entry */
++#define R_X86_64_PLT32		4	/* 32 bit PLT address */
++#define R_X86_64_COPY		5	/* Copy symbol at runtime */
++#define R_X86_64_GLOB_DAT	6	/* Create GOT entry */
++#define R_X86_64_JUMP_SLOT	7	/* Create PLT entry */
++#define R_X86_64_RELATIVE	8	/* Adjust by program base */
++#define R_X86_64_GOTPCREL	9	/* 32 bit signed PC relative
++					   offset to GOT */
++#define R_X86_64_32		10	/* Direct 32 bit zero extended */
++#define R_X86_64_32S		11	/* Direct 32 bit sign extended */
++#define R_X86_64_16		12	/* Direct 16 bit zero extended */
++#define R_X86_64_PC16		13	/* 16 bit sign extended pc relative */
++#define R_X86_64_8		14	/* Direct 8 bit sign extended  */
++#define R_X86_64_PC8		15	/* 8 bit sign extended pc relative */
++#define R_X86_64_DTPMOD64	16	/* ID of module containing symbol */
++#define R_X86_64_DTPOFF64	17	/* Offset in module's TLS block */
++#define R_X86_64_TPOFF64	18	/* Offset in initial TLS block */
++#define R_X86_64_TLSGD		19	/* 32 bit signed PC relative offset
++					   to two GOT entries for GD symbol */
++#define R_X86_64_TLSLD		20	/* 32 bit signed PC relative offset
++					   to two GOT entries for LD symbol */
++#define R_X86_64_DTPOFF32	21	/* Offset in TLS block */
++#define R_X86_64_GOTTPOFF	22	/* 32 bit signed PC relative offset
++					   to GOT entry for IE symbol */
++#define R_X86_64_TPOFF32	23	/* Offset in initial TLS block */
++
++#define R_X86_64_NUM		24
++
++__END_DECLS
++
++#endif	/* elf.h */
+ 
+ #include "elfconfig.h"
+ 
+@@ -185,3 +2631,4 @@
+ void fatal(const char *fmt, ...);
+ void warn(const char *fmt, ...);
+ void merror(const char *fmt, ...);
++
+diff -Nur linux-3.11.5.orig/scripts/mod/sumversion.c linux-3.11.5/scripts/mod/sumversion.c
+--- linux-3.11.5.orig/scripts/mod/sumversion.c	2013-10-14 03:14:45.000000000 +0200
++++ linux-3.11.5/scripts/mod/sumversion.c	2013-10-16 18:09:31.000000000 +0200
+@@ -1,4 +1,4 @@
+-#include <netinet/in.h>
++/* #include <netinet/in.h> */
+ #ifdef __sun__
+ #include <inttypes.h>
+ #else
+diff -Nur linux-3.11.5.orig/tools/include/tools/linux_types.h linux-3.11.5/tools/include/tools/linux_types.h
+--- linux-3.11.5.orig/tools/include/tools/linux_types.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-3.11.5/tools/include/tools/linux_types.h	2013-10-16 18:09:31.000000000 +0200
+@@ -0,0 +1,22 @@
++#ifndef __LINUX_TYPES_H
++#define __LINUX_TYPES_H
++
++#include <stdint.h>
++
++typedef uint8_t __u8;
++typedef uint8_t __be8;
++typedef uint8_t __le8;
++
++typedef uint16_t __u16;
++typedef uint16_t __be16;
++typedef uint16_t __le16;
++
++typedef uint32_t __u32;
++typedef uint32_t __be32;
++typedef uint32_t __le32;
++
++typedef uint64_t __u64;
++typedef uint64_t __be64;
++typedef uint64_t __le64;
++
++#endif
diff --git a/target/linux/patches/3.12.6/cris-etrax.patch b/target/linux/patches/3.12.6/cris-etrax.patch
new file mode 100644
index 000000000..a80d9a8b8
--- /dev/null
+++ b/target/linux/patches/3.12.6/cris-etrax.patch
@@ -0,0 +1,12 @@
+diff -Nur linux-2.6.39.orig/arch/cris/arch-v32/drivers/i2c.h linux-2.6.39/arch/cris/arch-v32/drivers/i2c.h
+--- linux-2.6.39.orig/arch/cris/arch-v32/drivers/i2c.h	2011-05-19 06:06:34.000000000 +0200
++++ linux-2.6.39/arch/cris/arch-v32/drivers/i2c.h	2011-08-24 19:15:05.000000000 +0200
+@@ -2,7 +2,7 @@
+ #include <linux/init.h>
+ 
+ /* High level I2C actions */
+-int __init i2c_init(void);
++static int __init i2c_init(void);
+ int i2c_write(unsigned char theSlave, void *data, size_t nbytes);
+ int i2c_read(unsigned char theSlave, void *data, size_t nbytes);
+ int i2c_writereg(unsigned char theSlave, unsigned char theReg, unsigned char theValue);
diff --git a/target/linux/patches/3.12.6/defaults.patch b/target/linux/patches/3.12.6/defaults.patch
new file mode 100644
index 000000000..6cdca084e
--- /dev/null
+++ b/target/linux/patches/3.12.6/defaults.patch
@@ -0,0 +1,46 @@
+diff -Nur linux-3.0.4.orig/fs/Kconfig linux-3.0.4/fs/Kconfig
+--- linux-3.0.4.orig/fs/Kconfig	2011-08-29 22:56:30.000000000 +0200
++++ linux-3.0.4/fs/Kconfig	2011-10-15 22:08:44.000000000 +0200
+@@ -47,7 +47,7 @@
+ 	def_bool n
+ 
+ config EXPORTFS
+-	tristate
++	def_bool y
+ 
+ config FILE_LOCKING
+ 	bool "Enable POSIX file locking API" if EXPERT
+diff -Nur linux-3.0.4.orig/fs/notify/Kconfig linux-3.0.4/fs/notify/Kconfig
+--- linux-3.0.4.orig/fs/notify/Kconfig	2011-08-29 22:56:30.000000000 +0200
++++ linux-3.0.4/fs/notify/Kconfig	2011-10-15 22:02:00.000000000 +0200
+@@ -1,5 +1,5 @@
+ config FSNOTIFY
+-	def_bool n
++	def_bool y
+ 
+ source "fs/notify/dnotify/Kconfig"
+ source "fs/notify/inotify/Kconfig"
+diff -Nur linux-3.11.10.orig/drivers/scsi/Kconfig linux-3.11.10/drivers/scsi/Kconfig
+--- linux-3.11.10.orig/drivers/scsi/Kconfig	2013-11-29 19:42:37.000000000 +0100
++++ linux-3.11.10/drivers/scsi/Kconfig	2013-12-27 19:13:21.000000000 +0100
+@@ -2,7 +2,7 @@
+ 
+ config SCSI_MOD
+        tristate
+-       default y if SCSI=n || SCSI=y
++       default y if SCSI=y
+        default m if SCSI=m
+ 
+ config RAID_ATTRS
+diff -Nur linux-3.11.10.orig/usr/Kconfig linux-3.11.10/usr/Kconfig
+--- linux-3.11.10.orig/usr/Kconfig	2013-11-29 19:42:37.000000000 +0100
++++ linux-3.11.10/usr/Kconfig	2013-12-27 19:15:16.000000000 +0100
+@@ -47,7 +47,7 @@
+ 
+ config RD_GZIP
+ 	bool "Support initial ramdisks compressed using gzip" if EXPERT
+-	default y
++	default n
+ 	depends on BLK_DEV_INITRD
+ 	select DECOMPRESS_GZIP
+ 	help
diff --git a/target/linux/patches/3.12.6/disable-netfilter.patch b/target/linux/patches/3.12.6/disable-netfilter.patch
new file mode 100644
index 000000000..7b1ca013a
--- /dev/null
+++ b/target/linux/patches/3.12.6/disable-netfilter.patch
@@ -0,0 +1,160 @@
+diff -Nur linux-3.7.3.orig/net/Kconfig linux-3.7.3/net/Kconfig
+--- linux-3.7.3.orig/net/Kconfig	2013-01-17 17:47:40.000000000 +0100
++++ linux-3.7.3/net/Kconfig	2013-01-19 18:19:55.000000000 +0100
+@@ -163,7 +163,7 @@
+ config NETFILTER_ADVANCED
+ 	bool "Advanced netfilter configuration"
+ 	depends on NETFILTER
+-	default y
++	default n
+ 	help
+ 	  If you say Y here you can select between all the netfilter modules.
+ 	  If you say N the more unusual ones will not be shown and the
+@@ -175,7 +175,7 @@
+ 	bool "Bridged IP/ARP packets filtering"
+ 	depends on BRIDGE && NETFILTER && INET
+ 	depends on NETFILTER_ADVANCED
+-	default y
++	default n
+ 	---help---
+ 	  Enabling this option will let arptables resp. iptables see bridged
+ 	  ARP resp. IP traffic. If you want a bridging firewall, you probably
+diff -Nur linux-3.7.3.orig/net/netfilter/Kconfig linux-3.7.3/net/netfilter/Kconfig
+--- linux-3.7.3.orig/net/netfilter/Kconfig	2013-01-17 17:47:40.000000000 +0100
++++ linux-3.7.3/net/netfilter/Kconfig	2013-01-19 18:21:41.000000000 +0100
+@@ -22,7 +22,6 @@
+ 	  
+ config NETFILTER_NETLINK_LOG
+ 	tristate "Netfilter LOG over NFNETLINK interface"
+-	default m if NETFILTER_ADVANCED=n
+ 	select NETFILTER_NETLINK
+ 	help
+ 	  If this option is enabled, the kernel will include support
+@@ -34,7 +33,6 @@
+ 
+ config NF_CONNTRACK
+ 	tristate "Netfilter connection tracking support"
+-	default m if NETFILTER_ADVANCED=n
+ 	help
+ 	  Connection tracking keeps a record of what packets have passed
+ 	  through your machine, in order to figure out how they are related
+@@ -60,7 +58,6 @@
+ config NF_CONNTRACK_SECMARK
+ 	bool  'Connection tracking security mark support'
+ 	depends on NETWORK_SECMARK
+-	default m if NETFILTER_ADVANCED=n
+ 	help
+ 	  This option enables security markings to be applied to
+ 	  connections.  Typically they are copied to connections from
+@@ -177,7 +174,6 @@
+ 
+ config NF_CONNTRACK_FTP
+ 	tristate "FTP protocol support"
+-	default m if NETFILTER_ADVANCED=n
+ 	help
+ 	  Tracking FTP connections is problematic: special helpers are
+ 	  required for tracking them, and doing masquerading and other forms
+@@ -211,7 +207,6 @@
+ 
+ config NF_CONNTRACK_IRC
+ 	tristate "IRC protocol support"
+-	default m if NETFILTER_ADVANCED=n
+ 	help
+ 	  There is a commonly-used extension to IRC called
+ 	  Direct Client-to-Client Protocol (DCC).  This enables users to send
+@@ -296,7 +291,6 @@
+ 
+ config NF_CONNTRACK_SIP
+ 	tristate "SIP protocol support"
+-	default m if NETFILTER_ADVANCED=n
+ 	help
+ 	  SIP is an application-layer control protocol that can establish,
+ 	  modify, and terminate multimedia sessions (conferences) such as
+@@ -320,7 +314,6 @@
+ config NF_CT_NETLINK
+ 	tristate 'Connection tracking netlink interface'
+ 	select NETFILTER_NETLINK
+-	default m if NETFILTER_ADVANCED=n
+ 	help
+ 	  This option enables support for a netlink-based userspace interface
+ 
+@@ -424,7 +417,6 @@
+ 
+ config NETFILTER_XTABLES
+ 	tristate "Netfilter Xtables support (required for ip_tables)"
+-	default m if NETFILTER_ADVANCED=n
+ 	help
+ 	  This is required if you intend to use any of ip_tables,
+ 	  ip6_tables or arp_tables.
+@@ -435,7 +427,6 @@
+ 
+ config NETFILTER_XT_MARK
+ 	tristate 'nfmark target and match support'
+-	default m if NETFILTER_ADVANCED=n
+ 	---help---
+ 	This option adds the "MARK" target and "mark" match.
+ 
+@@ -527,7 +518,6 @@
+ config NETFILTER_XT_TARGET_CONNSECMARK
+ 	tristate '"CONNSECMARK" target support'
+ 	depends on NF_CONNTRACK && NF_CONNTRACK_SECMARK
+-	default m if NETFILTER_ADVANCED=n
+ 	help
+ 	  The CONNSECMARK target copies security markings from packets
+ 	  to connections, and restores security markings from connections
+@@ -632,7 +622,6 @@
+ 
+ config NETFILTER_XT_TARGET_LOG
+ 	tristate "LOG target support"
+-	default m if NETFILTER_ADVANCED=n
+ 	help
+ 	  This option adds a `LOG' target, which allows you to create rules in
+ 	  any iptables table which records the packet header to the syslog.
+@@ -660,7 +649,6 @@
+ 
+ config NETFILTER_XT_TARGET_NFLOG
+ 	tristate '"NFLOG" target support'
+-	default m if NETFILTER_ADVANCED=n
+ 	select NETFILTER_NETLINK_LOG
+ 	help
+ 	  This option enables the NFLOG target, which allows to LOG
+@@ -741,7 +729,6 @@
+ config NETFILTER_XT_TARGET_SECMARK
+ 	tristate '"SECMARK" target support'
+ 	depends on NETWORK_SECMARK
+-	default m if NETFILTER_ADVANCED=n
+ 	help
+ 	  The SECMARK target allows security marking of network
+ 	  packets, for use with security subsystems.
+@@ -751,7 +738,6 @@
+ config NETFILTER_XT_TARGET_TCPMSS
+ 	tristate '"TCPMSS" target support'
+ 	depends on (IPV6 || IPV6=n)
+-	default m if NETFILTER_ADVANCED=n
+ 	---help---
+ 	  This option adds a `TCPMSS' target, which allows you to alter the
+ 	  MSS value of TCP SYN packets, to control the maximum size for that
+@@ -856,7 +842,6 @@
+ config NETFILTER_XT_MATCH_CONNTRACK
+ 	tristate '"conntrack" connection tracking match support'
+ 	depends on NF_CONNTRACK
+-	default m if NETFILTER_ADVANCED=n
+ 	help
+ 	  This is a general conntrack match module, a superset of the state match.
+ 
+@@ -1063,7 +1048,6 @@
+ config NETFILTER_XT_MATCH_POLICY
+ 	tristate 'IPsec "policy" match support'
+ 	depends on XFRM
+-	default m if NETFILTER_ADVANCED=n
+ 	help
+ 	  Policy matching allows you to match packets based on the
+ 	  IPsec policy that was used during decapsulation/will
+@@ -1170,7 +1154,6 @@
+ config NETFILTER_XT_MATCH_STATE
+ 	tristate '"state" match support'
+ 	depends on NF_CONNTRACK
+-	default m if NETFILTER_ADVANCED=n
+ 	help
+ 	  Connection state matching allows you to match packets based on their
+ 	  relationship to a tracked connection (ie. previous packets).  This
diff --git a/target/linux/patches/3.12.6/export-symbol-for-exmap.patch b/target/linux/patches/3.12.6/export-symbol-for-exmap.patch
new file mode 100644
index 000000000..4f0fc8449
--- /dev/null
+++ b/target/linux/patches/3.12.6/export-symbol-for-exmap.patch
@@ -0,0 +1,11 @@
+diff -Nur linux-3.11.5.orig/kernel/pid.c linux-3.11.5/kernel/pid.c
+--- linux-3.11.5.orig/kernel/pid.c	2013-10-14 03:14:45.000000000 +0200
++++ linux-3.11.5/kernel/pid.c	2013-10-29 15:37:02.000000000 +0100
+@@ -450,6 +450,7 @@
+ {
+ 	return find_task_by_pid_ns(vnr, task_active_pid_ns(current));
+ }
++EXPORT_SYMBOL(find_task_by_vpid);
+ 
+ struct pid *get_task_pid(struct task_struct *task, enum pid_type type)
+ {
diff --git a/target/linux/patches/3.12.6/gemalto.patch b/target/linux/patches/3.12.6/gemalto.patch
new file mode 100644
index 000000000..65f7af1d7
--- /dev/null
+++ b/target/linux/patches/3.12.6/gemalto.patch
@@ -0,0 +1,11 @@
+diff -Nur linux-2.6.36.orig/drivers/tty/serial/8250/serial_cs.c linux-2.6.36/drivers/serial/8250/serial_cs.c
+--- linux-2.6.36.orig/drivers/tty/serial/8250/serial_cs.c	2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/drivers/tty/serial/8250/serial_cs.c	2010-12-13 23:03:40.000000000 +0100
+@@ -794,6 +794,7 @@
+ 	PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025),
+ 	PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045),
+ 	PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052),
++	PCMCIA_DEVICE_MANF_CARD(0x0157, 0x0100), /* Gemalto SCR */
+ 	PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */
+ 	PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */
+ 	PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae),
diff --git a/target/linux/patches/3.12.6/lemote-rfkill.patch b/target/linux/patches/3.12.6/lemote-rfkill.patch
new file mode 100644
index 000000000..a61488434
--- /dev/null
+++ b/target/linux/patches/3.12.6/lemote-rfkill.patch
@@ -0,0 +1,21 @@
+diff -Nur linux-3.3.orig/drivers/net/wireless/rtl818x/rtl8187/rfkill.c linux-3.3/drivers/net/wireless/rtl818x/rtl8187/rfkill.c
+--- linux-3.3.orig/drivers/net/wireless/rtl818x/rtl8187/rfkill.c	2012-03-19 00:15:34.000000000 +0100
++++ linux-3.3/drivers/net/wireless/rtl818x/rtl8187/rfkill.c	2012-03-27 23:29:46.000000000 +0200
+@@ -22,6 +22,9 @@
+ 
+ static bool rtl8187_is_radio_enabled(struct rtl8187_priv *priv)
+ {
++#ifdef CONFIG_LEMOTE_MACH2F
++	return 1;
++#else
+ 	u8 gpio;
+ 
+ 	gpio = rtl818x_ioread8(priv, &priv->map->GPIO0);
+@@ -29,6 +32,7 @@
+ 	gpio = rtl818x_ioread8(priv, &priv->map->GPIO1);
+ 
+ 	return gpio & priv->rfkill_mask;
++#endif
+ }
+ 
+ void rtl8187_rfkill_init(struct ieee80211_hw *hw)
diff --git a/target/linux/patches/3.12.6/microblaze-ethernet.patch b/target/linux/patches/3.12.6/microblaze-ethernet.patch
new file mode 100644
index 000000000..742ab477e
--- /dev/null
+++ b/target/linux/patches/3.12.6/microblaze-ethernet.patch
@@ -0,0 +1,11 @@
+diff -Nur linux-3.11.10.orig/drivers/net/ethernet/xilinx/xilinx_emaclite.c linux-3.11.10/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+--- linux-3.11.10.orig/drivers/net/ethernet/xilinx/xilinx_emaclite.c	2013-11-29 19:42:37.000000000 +0100
++++ linux-3.11.10/drivers/net/ethernet/xilinx/xilinx_emaclite.c	2013-12-23 20:01:14.000000000 +0100
+@@ -1282,6 +1282,7 @@
+ 	{ .compatible = "xlnx,opb-ethernetlite-1.01.b", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-1.00.a", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-2.00.a", },
++	{ .compatible = "xlnx,xps-ethernetlite-2.00.b", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-2.01.a", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-3.00.a", },
+ 	{ /* end of list */ },
diff --git a/target/linux/patches/3.12.6/microblaze-setup.patch b/target/linux/patches/3.12.6/microblaze-setup.patch
new file mode 100644
index 000000000..43815f274
--- /dev/null
+++ b/target/linux/patches/3.12.6/microblaze-setup.patch
@@ -0,0 +1,12 @@
+diff -Nur linux-3.11.10.orig/arch/microblaze/kernel/setup.c linux-3.11.10/arch/microblaze/kernel/setup.c
+--- linux-3.11.10.orig/arch/microblaze/kernel/setup.c	2013-11-29 19:42:37.000000000 +0100
++++ linux-3.11.10/arch/microblaze/kernel/setup.c	2013-12-08 13:02:37.000000000 +0100
+@@ -177,7 +177,7 @@
+ #else
+ 	if (!msr) {
+ 		pr_info("!!!Your kernel not setup MSR instruction but ");
+-		pr_cont"CPU have it %x\n", msr);
++		pr_cont("CPU have it %x\n", msr);
+ 	}
+ #endif
+ 
diff --git a/target/linux/patches/3.12.6/mips-lzo-fix.patch b/target/linux/patches/3.12.6/mips-lzo-fix.patch
new file mode 100644
index 000000000..0740bdc6a
--- /dev/null
+++ b/target/linux/patches/3.12.6/mips-lzo-fix.patch
@@ -0,0 +1,12 @@
+diff -Nur linux-3.11.5.orig/arch/mips/boot/compressed/decompress.c linux-3.11.5/arch/mips/boot/compressed/decompress.c
+--- linux-3.11.5.orig/arch/mips/boot/compressed/decompress.c	2013-10-14 03:14:45.000000000 +0200
++++ linux-3.11.5/arch/mips/boot/compressed/decompress.c	2013-11-08 18:19:47.000000000 +0100
+@@ -43,7 +43,7 @@
+ /* activate the code for pre-boot environment */
+ #define STATIC static
+ 
+-#ifdef CONFIG_KERNEL_GZIP
++#if defined(CONFIG_KERNEL_GZIP) || defined(CONFIG_KERNEL_LZO)
+ void *memcpy(void *dest, const void *src, size_t n)
+ {
+ 	int i;
diff --git a/target/linux/patches/3.12.6/mtd-rootfs.patch b/target/linux/patches/3.12.6/mtd-rootfs.patch
new file mode 100644
index 000000000..775d5fc80
--- /dev/null
+++ b/target/linux/patches/3.12.6/mtd-rootfs.patch
@@ -0,0 +1,26 @@
+diff -Nur linux-3.5.orig//drivers/mtd/mtdpart.c linux-3.5/drivers/mtd/mtdpart.c
+--- linux-3.5.orig//drivers/mtd/mtdpart.c	2012-07-21 22:58:29.000000000 +0200
++++ linux-3.5/drivers/mtd/mtdpart.c	2012-07-31 23:59:07.000000000 +0200
+@@ -30,6 +30,7 @@
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+ #include <linux/err.h>
++#include <linux/root_dev.h>
+ 
+ #include "mtdcore.h"
+ 
+@@ -637,6 +638,14 @@
+ 		if (IS_ERR(slave))
+ 			return PTR_ERR(slave);
+ 
++		if (strcmp(parts[i].name, "rootfs") == 0) {
++			if (ROOT_DEV == 0) {
++				printk(KERN_NOTICE "mtd: partition \"rootfs\" "
++					"set to be root filesystem\n");
++					ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, i);
++			}
++		}
++
+ 		mutex_lock(&mtd_partitions_mutex);
+ 		list_add(&slave->list, &mtd_partitions);
+ 		mutex_unlock(&mtd_partitions_mutex);
diff --git a/target/linux/patches/3.12.6/non-static.patch b/target/linux/patches/3.12.6/non-static.patch
new file mode 100644
index 000000000..a967703d0
--- /dev/null
+++ b/target/linux/patches/3.12.6/non-static.patch
@@ -0,0 +1,33 @@
+diff -Nur linux-2.6.39-rc6.orig/fs/namei.c linux-2.6.39-rc6/fs/namei.c
+--- linux-2.6.39-rc6.orig/fs/namei.c	2011-05-04 04:59:13.000000000 +0200
++++ linux-2.6.39-rc6/fs/namei.c	2011-05-05 11:30:14.000000000 +0200
+@@ -1769,7 +1769,7 @@
+  * needs parent already locked. Doesn't follow mounts.
+  * SMP-safe.
+  */
+-static struct dentry *lookup_hash(struct nameidata *nd)
++struct dentry *lookup_hash(struct nameidata *nd)
+ {
+ 	return __lookup_hash(&nd->last, nd->path.dentry, nd);
+ }
+diff -Nur linux-2.6.39-rc6.orig/fs/splice.c linux-2.6.39-rc6/fs/splice.c
+--- linux-2.6.39-rc6.orig/fs/splice.c	2011-05-04 04:59:13.000000000 +0200
++++ linux-2.6.39-rc6/fs/splice.c	2011-05-05 11:31:04.000000000 +0200
+@@ -1081,7 +1081,7 @@
+ /*
+  * Attempt to initiate a splice from pipe to file.
+  */
+-static long do_splice_from(struct pipe_inode_info *pipe, struct file *out,
++long do_splice_from(struct pipe_inode_info *pipe, struct file *out,
+ 			   loff_t *ppos, size_t len, unsigned int flags)
+ {
+ 	ssize_t (*splice_write)(struct pipe_inode_info *, struct file *,
+@@ -1109,7 +1109,7 @@
+ /*
+  * Attempt to initiate a splice from a file to a pipe.
+  */
+-static long do_splice_to(struct file *in, loff_t *ppos,
++long do_splice_to(struct file *in, loff_t *ppos,
+ 			 struct pipe_inode_info *pipe, size_t len,
+ 			 unsigned int flags)
+ {
diff --git a/target/linux/patches/3.12.6/ppc64-missing-zlib.patch b/target/linux/patches/3.12.6/ppc64-missing-zlib.patch
new file mode 100644
index 000000000..c6e0616be
--- /dev/null
+++ b/target/linux/patches/3.12.6/ppc64-missing-zlib.patch
@@ -0,0 +1,11 @@
+diff -Nur linux-3.11.5.orig/arch/powerpc/platforms/pseries/Kconfig linux-3.11.5/arch/powerpc/platforms/pseries/Kconfig
+--- linux-3.11.5.orig/arch/powerpc/platforms/pseries/Kconfig	2013-10-14 03:14:45.000000000 +0200
++++ linux-3.11.5/arch/powerpc/platforms/pseries/Kconfig	2013-11-01 15:23:09.000000000 +0100
+@@ -17,6 +17,7 @@
+ 	select PPC_NATIVE
+ 	select PPC_PCI_CHOICE if EXPERT
+ 	select ZLIB_DEFLATE
++	select ZLIB_INFLATE
+ 	select PPC_DOORBELL
+ 	select HAVE_CONTEXT_TRACKING
+ 	select HOTPLUG_CPU if SMP
diff --git a/target/linux/patches/3.12.6/raspberry.patch b/target/linux/patches/3.12.6/raspberry.patch
new file mode 100644
index 000000000..3f34b3e41
--- /dev/null
+++ b/target/linux/patches/3.12.6/raspberry.patch
@@ -0,0 +1,272726 @@
+diff -Nur linux-3.12.6/arch/arm/configs/bcmrpi_cutdown_defconfig linux-raspberry-pi/arch/arm/configs/bcmrpi_cutdown_defconfig
+--- linux-3.12.6/arch/arm/configs/bcmrpi_cutdown_defconfig	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/configs/bcmrpi_cutdown_defconfig	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,503 @@
++CONFIG_EXPERIMENTAL=y
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SYSVIPC=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++# CONFIG_UID16 is not set
++# CONFIG_KALLSYMS is not set
++CONFIG_EMBEDDED=y
++# CONFIG_VM_EVENT_COUNTERS is not set
++# CONFIG_COMPAT_BRK is not set
++CONFIG_SLAB=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODVERSIONS=y
++CONFIG_MODULE_SRCVERSION_ALL=y
++# CONFIG_BLK_DEV_BSG is not set
++CONFIG_ARCH_BCM2708=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_AEABI=y
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext3 rootwait"
++CONFIG_CPU_IDLE=y
++CONFIG_VFP=y
++CONFIG_BINFMT_MISC=m
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_XFRM_USER=y
++CONFIG_NET_KEY=m
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_RARP=y
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++CONFIG_NET_PKTGEN=m
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRCOMM=m
++CONFIG_IRDA_ULTRA=y
++CONFIG_IRDA_CACHE_LAST_LSAP=y
++CONFIG_IRDA_FAST_RR=y
++CONFIG_IRTTY_SIR=m
++CONFIG_KINGSUN_DONGLE=m
++CONFIG_KSDAZZLE_DONGLE=m
++CONFIG_KS959_DONGLE=m
++CONFIG_USB_IRDA=m
++CONFIG_SIGMATEL_FIR=m
++CONFIG_MCS_FIR=m
++CONFIG_BT=m
++CONFIG_BT_L2CAP=y
++CONFIG_BT_SCO=y
++CONFIG_BT_RFCOMM=m
++CONFIG_BT_RFCOMM_TTY=y
++CONFIG_BT_BNEP=m
++CONFIG_BT_BNEP_MC_FILTER=y
++CONFIG_BT_BNEP_PROTO_FILTER=y
++CONFIG_BT_HIDP=m
++CONFIG_BT_HCIBTUSB=m
++CONFIG_BT_HCIBCM203X=m
++CONFIG_BT_HCIBPA10X=m
++CONFIG_BT_HCIBFUSB=m
++CONFIG_BT_HCIVHCI=m
++CONFIG_BT_MRVL=m
++CONFIG_BT_MRVL_SDIO=m
++CONFIG_BT_ATH3K=m
++CONFIG_CFG80211=m
++CONFIG_MAC80211=m
++CONFIG_MAC80211_RC_PID=y
++CONFIG_MAC80211_MESH=y
++CONFIG_WIMAX=m
++CONFIG_NET_9P=m
++CONFIG_NFC=m
++CONFIG_NFC_PN533=m
++CONFIG_DEVTMPFS=y
++CONFIG_BLK_DEV_LOOP=y
++CONFIG_BLK_DEV_CRYPTOLOOP=m
++CONFIG_BLK_DEV_NBD=m
++CONFIG_BLK_DEV_RAM=y
++CONFIG_CDROM_PKTCDVD=m
++CONFIG_MISC_DEVICES=y
++CONFIG_SCSI=y
++# CONFIG_SCSI_PROC_FS is not set
++CONFIG_BLK_DEV_SD=m
++CONFIG_BLK_DEV_SR=m
++CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_LOWLEVEL is not set
++CONFIG_NETDEVICES=y
++CONFIG_TUN=m
++CONFIG_PHYLIB=m
++CONFIG_MDIO_BITBANG=m
++CONFIG_NET_ETHERNET=y
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++CONFIG_LIBERTAS_THINFIRM=m
++CONFIG_LIBERTAS_THINFIRM_USB=m
++CONFIG_AT76C50X_USB=m
++CONFIG_USB_ZD1201=m
++CONFIG_USB_NET_RNDIS_WLAN=m
++CONFIG_RTL8187=m
++CONFIG_MAC80211_HWSIM=m
++CONFIG_ATH_COMMON=m
++CONFIG_ATH9K=m
++CONFIG_ATH9K_HTC=m
++CONFIG_CARL9170=m
++CONFIG_B43=m
++CONFIG_B43LEGACY=m
++CONFIG_HOSTAP=m
++CONFIG_IWM=m
++CONFIG_LIBERTAS=m
++CONFIG_LIBERTAS_USB=m
++CONFIG_LIBERTAS_SDIO=m
++CONFIG_P54_COMMON=m
++CONFIG_P54_USB=m
++CONFIG_RT2X00=m
++CONFIG_RT2500USB=m
++CONFIG_RT73USB=m
++CONFIG_RT2800USB=m
++CONFIG_RT2800USB_RT53XX=y
++CONFIG_RTL8192CU=m
++CONFIG_WL1251=m
++CONFIG_WL12XX_MENU=m
++CONFIG_ZD1211RW=m
++CONFIG_MWIFIEX=m
++CONFIG_MWIFIEX_SDIO=m
++CONFIG_WIMAX_I2400M_USB=m
++CONFIG_USB_CATC=m
++CONFIG_USB_KAWETH=m
++CONFIG_USB_PEGASUS=m
++CONFIG_USB_RTL8150=m
++CONFIG_USB_USBNET=y
++CONFIG_USB_NET_AX8817X=m
++CONFIG_USB_NET_CDCETHER=m
++CONFIG_USB_NET_CDC_EEM=m
++CONFIG_USB_NET_DM9601=m
++CONFIG_USB_NET_SMSC75XX=m
++CONFIG_USB_NET_SMSC95XX=y
++CONFIG_USB_NET_GL620A=m
++CONFIG_USB_NET_NET1080=m
++CONFIG_USB_NET_PLUSB=m
++CONFIG_USB_NET_MCS7830=m
++CONFIG_USB_NET_CDC_SUBSET=m
++CONFIG_USB_ALI_M5632=y
++CONFIG_USB_AN2720=y
++CONFIG_USB_KC2190=y
++# CONFIG_USB_NET_ZAURUS is not set
++CONFIG_USB_NET_CX82310_ETH=m
++CONFIG_USB_NET_KALMIA=m
++CONFIG_USB_NET_INT51X1=m
++CONFIG_USB_IPHETH=m
++CONFIG_USB_SIERRA_NET=m
++CONFIG_USB_VL600=m
++CONFIG_PPP=m
++CONFIG_PPP_ASYNC=m
++CONFIG_PPP_SYNC_TTY=m
++CONFIG_PPP_DEFLATE=m
++CONFIG_PPP_BSDCOMP=m
++CONFIG_SLIP=m
++CONFIG_SLIP_COMPRESSED=y
++CONFIG_NETCONSOLE=m
++CONFIG_INPUT_POLLDEV=m
++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_JOYDEV=m
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_MISC=y
++CONFIG_INPUT_AD714X=m
++CONFIG_INPUT_ATI_REMOTE=m
++CONFIG_INPUT_ATI_REMOTE2=m
++CONFIG_INPUT_KEYSPAN_REMOTE=m
++CONFIG_INPUT_POWERMATE=m
++CONFIG_INPUT_YEALINK=m
++CONFIG_INPUT_CM109=m
++CONFIG_INPUT_UINPUT=m
++CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
++CONFIG_INPUT_ADXL34X=m
++CONFIG_INPUT_CMA3000=m
++CONFIG_SERIO=m
++CONFIG_SERIO_RAW=m
++CONFIG_GAMEPORT=m
++CONFIG_GAMEPORT_NS558=m
++CONFIG_GAMEPORT_L4=m
++CONFIG_VT_HW_CONSOLE_BINDING=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_AMBA_PL011=y
++CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_RAW_DRIVER=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BCM2708_WDT=m
++# CONFIG_MFD_SUPPORT is not set
++CONFIG_FB=y
++CONFIG_FB_BCM2708=y
++CONFIG_FRAMEBUFFER_CONSOLE=y
++CONFIG_LOGO=y
++# CONFIG_LOGO_LINUX_MONO is not set
++# CONFIG_LOGO_LINUX_VGA16 is not set
++CONFIG_SOUND=y
++CONFIG_SND=m
++CONFIG_SND_SEQUENCER=m
++CONFIG_SND_SEQ_DUMMY=m
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_SEQUENCER_OSS=y
++CONFIG_SND_HRTIMER=m
++CONFIG_SND_DUMMY=m
++CONFIG_SND_ALOOP=m
++CONFIG_SND_VIRMIDI=m
++CONFIG_SND_MTPAV=m
++CONFIG_SND_SERIAL_U16550=m
++CONFIG_SND_MPU401=m
++CONFIG_SND_BCM2835=m
++CONFIG_SND_USB_AUDIO=m
++CONFIG_SND_USB_UA101=m
++CONFIG_SND_USB_CAIAQ=m
++CONFIG_SND_USB_6FIRE=m
++CONFIG_SOUND_PRIME=m
++CONFIG_HID_PID=y
++CONFIG_USB_HIDDEV=y
++CONFIG_HID_A4TECH=m
++CONFIG_HID_ACRUX=m
++CONFIG_HID_APPLE=m
++CONFIG_HID_BELKIN=m
++CONFIG_HID_CHERRY=m
++CONFIG_HID_CHICONY=m
++CONFIG_HID_CYPRESS=m
++CONFIG_HID_DRAGONRISE=m
++CONFIG_HID_EMS_FF=m
++CONFIG_HID_ELECOM=m
++CONFIG_HID_EZKEY=m
++CONFIG_HID_HOLTEK=m
++CONFIG_HID_KEYTOUCH=m
++CONFIG_HID_KYE=m
++CONFIG_HID_UCLOGIC=m
++CONFIG_HID_WALTOP=m
++CONFIG_HID_GYRATION=m
++CONFIG_HID_TWINHAN=m
++CONFIG_HID_KENSINGTON=m
++CONFIG_HID_LCPOWER=m
++CONFIG_HID_LOGITECH=m
++CONFIG_HID_MAGICMOUSE=m
++CONFIG_HID_MICROSOFT=m
++CONFIG_HID_MONTEREY=m
++CONFIG_HID_MULTITOUCH=m
++CONFIG_HID_NTRIG=m
++CONFIG_HID_ORTEK=m
++CONFIG_HID_PANTHERLORD=m
++CONFIG_HID_PETALYNX=m
++CONFIG_HID_PICOLCD=m
++CONFIG_HID_QUANTA=m
++CONFIG_HID_ROCCAT=m
++CONFIG_HID_SAMSUNG=m
++CONFIG_HID_SONY=m
++CONFIG_HID_SPEEDLINK=m
++CONFIG_HID_SUNPLUS=m
++CONFIG_HID_GREENASIA=m
++CONFIG_HID_SMARTJOYPLUS=m
++CONFIG_HID_TOPSEED=m
++CONFIG_HID_THRUSTMASTER=m
++CONFIG_HID_WACOM=m
++CONFIG_HID_WIIMOTE=m
++CONFIG_HID_ZEROPLUS=m
++CONFIG_HID_ZYDACRON=m
++CONFIG_USB=y
++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
++CONFIG_USB_MON=m
++CONFIG_USB_DWCOTG=y
++CONFIG_USB_STORAGE=y
++CONFIG_USB_STORAGE_REALTEK=m
++CONFIG_USB_STORAGE_DATAFAB=m
++CONFIG_USB_STORAGE_FREECOM=m
++CONFIG_USB_STORAGE_ISD200=m
++CONFIG_USB_STORAGE_USBAT=m
++CONFIG_USB_STORAGE_SDDR09=m
++CONFIG_USB_STORAGE_SDDR55=m
++CONFIG_USB_STORAGE_JUMPSHOT=m
++CONFIG_USB_STORAGE_ALAUDA=m
++CONFIG_USB_STORAGE_ONETOUCH=m
++CONFIG_USB_STORAGE_KARMA=m
++CONFIG_USB_STORAGE_CYPRESS_ATACB=m
++CONFIG_USB_STORAGE_ENE_UB6250=m
++CONFIG_USB_UAS=m
++CONFIG_USB_LIBUSUAL=y
++CONFIG_USB_MDC800=m
++CONFIG_USB_MICROTEK=m
++CONFIG_USB_SERIAL=m
++CONFIG_USB_SERIAL_GENERIC=y
++CONFIG_USB_SERIAL_AIRCABLE=m
++CONFIG_USB_SERIAL_ARK3116=m
++CONFIG_USB_SERIAL_BELKIN=m
++CONFIG_USB_SERIAL_CH341=m
++CONFIG_USB_SERIAL_WHITEHEAT=m
++CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
++CONFIG_USB_SERIAL_CP210X=m
++CONFIG_USB_SERIAL_CYPRESS_M8=m
++CONFIG_USB_SERIAL_EMPEG=m
++CONFIG_USB_SERIAL_FTDI_SIO=m
++CONFIG_USB_SERIAL_FUNSOFT=m
++CONFIG_USB_SERIAL_VISOR=m
++CONFIG_USB_SERIAL_IPAQ=m
++CONFIG_USB_SERIAL_IR=m
++CONFIG_USB_SERIAL_EDGEPORT=m
++CONFIG_USB_SERIAL_EDGEPORT_TI=m
++CONFIG_USB_SERIAL_GARMIN=m
++CONFIG_USB_SERIAL_IPW=m
++CONFIG_USB_SERIAL_IUU=m
++CONFIG_USB_SERIAL_KEYSPAN_PDA=m
++CONFIG_USB_SERIAL_KEYSPAN=m
++CONFIG_USB_SERIAL_KLSI=m
++CONFIG_USB_SERIAL_KOBIL_SCT=m
++CONFIG_USB_SERIAL_MCT_U232=m
++CONFIG_USB_SERIAL_MOS7720=m
++CONFIG_USB_SERIAL_MOS7840=m
++CONFIG_USB_SERIAL_MOTOROLA=m
++CONFIG_USB_SERIAL_NAVMAN=m
++CONFIG_USB_SERIAL_PL2303=m
++CONFIG_USB_SERIAL_OTI6858=m
++CONFIG_USB_SERIAL_QCAUX=m
++CONFIG_USB_SERIAL_QUALCOMM=m
++CONFIG_USB_SERIAL_SPCP8X5=m
++CONFIG_USB_SERIAL_HP4X=m
++CONFIG_USB_SERIAL_SAFE=m
++CONFIG_USB_SERIAL_SIEMENS_MPI=m
++CONFIG_USB_SERIAL_SIERRAWIRELESS=m
++CONFIG_USB_SERIAL_SYMBOL=m
++CONFIG_USB_SERIAL_TI=m
++CONFIG_USB_SERIAL_CYBERJACK=m
++CONFIG_USB_SERIAL_XIRCOM=m
++CONFIG_USB_SERIAL_OPTION=m
++CONFIG_USB_SERIAL_OMNINET=m
++CONFIG_USB_SERIAL_OPTICON=m
++CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
++CONFIG_USB_SERIAL_ZIO=m
++CONFIG_USB_SERIAL_SSU100=m
++CONFIG_USB_SERIAL_DEBUG=m
++CONFIG_USB_EMI62=m
++CONFIG_USB_EMI26=m
++CONFIG_USB_ADUTUX=m
++CONFIG_USB_SEVSEG=m
++CONFIG_USB_RIO500=m
++CONFIG_USB_LEGOTOWER=m
++CONFIG_USB_LCD=m
++CONFIG_USB_LED=m
++CONFIG_USB_CYPRESS_CY7C63=m
++CONFIG_USB_CYTHERM=m
++CONFIG_USB_IDMOUSE=m
++CONFIG_USB_FTDI_ELAN=m
++CONFIG_USB_APPLEDISPLAY=m
++CONFIG_USB_LD=m
++CONFIG_USB_TRANCEVIBRATOR=m
++CONFIG_USB_IOWARRIOR=m
++CONFIG_USB_TEST=m
++CONFIG_USB_ISIGHTFW=m
++CONFIG_USB_YUREX=m
++CONFIG_MMC=y
++CONFIG_MMC_SDHCI=y
++CONFIG_MMC_SDHCI_PLTFM=y
++CONFIG_MMC_SDHCI_BCM2708=y
++CONFIG_MMC_SDHCI_BCM2708_DMA=y
++CONFIG_LEDS_GPIO=y
++CONFIG_LEDS_TRIGGER_TIMER=m
++CONFIG_LEDS_TRIGGER_HEARTBEAT=m
++CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
++CONFIG_UIO=m
++CONFIG_UIO_PDRV=m
++CONFIG_UIO_PDRV_GENIRQ=m
++# CONFIG_IOMMU_SUPPORT is not set
++CONFIG_EXT4_FS=y
++CONFIG_EXT4_FS_POSIX_ACL=y
++CONFIG_EXT4_FS_SECURITY=y
++CONFIG_REISERFS_FS=m
++CONFIG_REISERFS_FS_XATTR=y
++CONFIG_REISERFS_FS_POSIX_ACL=y
++CONFIG_REISERFS_FS_SECURITY=y
++CONFIG_JFS_FS=m
++CONFIG_JFS_POSIX_ACL=y
++CONFIG_JFS_SECURITY=y
++CONFIG_XFS_FS=m
++CONFIG_XFS_QUOTA=y
++CONFIG_XFS_POSIX_ACL=y
++CONFIG_XFS_RT=y
++CONFIG_GFS2_FS=m
++CONFIG_OCFS2_FS=m
++CONFIG_BTRFS_FS=m
++CONFIG_BTRFS_FS_POSIX_ACL=y
++CONFIG_NILFS2_FS=m
++CONFIG_AUTOFS4_FS=y
++CONFIG_FUSE_FS=m
++CONFIG_CUSE=m
++CONFIG_FSCACHE=y
++CONFIG_CACHEFILES=y
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++CONFIG_ZISOFS=y
++CONFIG_UDF_FS=m
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
++CONFIG_NTFS_FS=m
++CONFIG_TMPFS=y
++CONFIG_TMPFS_POSIX_ACL=y
++CONFIG_CONFIGFS_FS=y
++CONFIG_SQUASHFS=m
++CONFIG_SQUASHFS_XATTR=y
++CONFIG_SQUASHFS_LZO=y
++CONFIG_SQUASHFS_XZ=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++CONFIG_NFS_V3_ACL=y
++CONFIG_NFS_V4=y
++CONFIG_ROOT_NFS=y
++CONFIG_NFS_FSCACHE=y
++CONFIG_CIFS=m
++CONFIG_CIFS_WEAK_PW_HASH=y
++CONFIG_CIFS_XATTR=y
++CONFIG_CIFS_POSIX=y
++CONFIG_9P_FS=m
++CONFIG_PARTITION_ADVANCED=y
++CONFIG_MAC_PARTITION=y
++CONFIG_EFI_PARTITION=y
++CONFIG_NLS_DEFAULT="utf8"
++CONFIG_NLS_CODEPAGE_437=y
++CONFIG_NLS_CODEPAGE_737=m
++CONFIG_NLS_CODEPAGE_775=m
++CONFIG_NLS_CODEPAGE_850=m
++CONFIG_NLS_CODEPAGE_852=m
++CONFIG_NLS_CODEPAGE_855=m
++CONFIG_NLS_CODEPAGE_857=m
++CONFIG_NLS_CODEPAGE_860=m
++CONFIG_NLS_CODEPAGE_861=m
++CONFIG_NLS_CODEPAGE_862=m
++CONFIG_NLS_CODEPAGE_863=m
++CONFIG_NLS_CODEPAGE_864=m
++CONFIG_NLS_CODEPAGE_865=m
++CONFIG_NLS_CODEPAGE_866=m
++CONFIG_NLS_CODEPAGE_869=m
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_CODEPAGE_950=m
++CONFIG_NLS_CODEPAGE_932=m
++CONFIG_NLS_CODEPAGE_949=m
++CONFIG_NLS_CODEPAGE_874=m
++CONFIG_NLS_ISO8859_8=m
++CONFIG_NLS_CODEPAGE_1250=m
++CONFIG_NLS_CODEPAGE_1251=m
++CONFIG_NLS_ASCII=y
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_ISO8859_2=m
++CONFIG_NLS_ISO8859_3=m
++CONFIG_NLS_ISO8859_4=m
++CONFIG_NLS_ISO8859_5=m
++CONFIG_NLS_ISO8859_6=m
++CONFIG_NLS_ISO8859_7=m
++CONFIG_NLS_ISO8859_9=m
++CONFIG_NLS_ISO8859_13=m
++CONFIG_NLS_ISO8859_14=m
++CONFIG_NLS_ISO8859_15=m
++CONFIG_NLS_KOI8_R=m
++CONFIG_NLS_KOI8_U=m
++CONFIG_NLS_UTF8=m
++# CONFIG_SCHED_DEBUG is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_FTRACE is not set
++# CONFIG_ARM_UNWIND is not set
++CONFIG_CRYPTO_AUTHENC=m
++CONFIG_CRYPTO_SEQIV=m
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_HMAC=y
++CONFIG_CRYPTO_XCBC=m
++CONFIG_CRYPTO_MD5=y
++CONFIG_CRYPTO_SHA1=y
++CONFIG_CRYPTO_SHA256=m
++CONFIG_CRYPTO_SHA512=m
++CONFIG_CRYPTO_TGR192=m
++CONFIG_CRYPTO_WP512=m
++CONFIG_CRYPTO_CAST5=m
++CONFIG_CRYPTO_DES=y
++CONFIG_CRYPTO_DEFLATE=m
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++# CONFIG_CRYPTO_HW is not set
++CONFIG_CRC_ITU_T=y
++CONFIG_LIBCRC32C=y
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_COMPAT=y
++CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_HELPER_AUTO=y
++CONFIG_I2C_BCM2708=m
++CONFIG_SPI=y
++CONFIG_SPI_MASTER=y
++CONFIG_SPI_BCM2708=m
+diff -Nur linux-3.12.6/arch/arm/configs/bcmrpi_defconfig linux-raspberry-pi/arch/arm/configs/bcmrpi_defconfig
+--- linux-3.12.6/arch/arm/configs/bcmrpi_defconfig	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/configs/bcmrpi_defconfig	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,1092 @@
++# CONFIG_ARM_PATCH_PHYS_VIRT is not set
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SYSVIPC=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_FHANDLE=y
++CONFIG_AUDIT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_BSD_PROCESS_ACCT=y
++CONFIG_BSD_PROCESS_ACCT_V3=y
++CONFIG_TASKSTATS=y
++CONFIG_TASK_DELAY_ACCT=y
++CONFIG_TASK_XACCT=y
++CONFIG_TASK_IO_ACCOUNTING=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_CGROUP_FREEZER=y
++CONFIG_CGROUP_DEVICE=y
++CONFIG_CGROUP_CPUACCT=y
++CONFIG_RESOURCE_COUNTERS=y
++CONFIG_BLK_CGROUP=y
++CONFIG_NAMESPACES=y
++CONFIG_SCHED_AUTOGROUP=y
++CONFIG_RELAY=y
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_EMBEDDED=y
++# CONFIG_COMPAT_BRK is not set
++CONFIG_PROFILING=y
++CONFIG_OPROFILE=m
++CONFIG_KPROBES=y
++CONFIG_JUMP_LABEL=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODVERSIONS=y
++CONFIG_MODULE_SRCVERSION_ALL=y
++CONFIG_BLK_DEV_THROTTLING=y
++CONFIG_PARTITION_ADVANCED=y
++CONFIG_MAC_PARTITION=y
++CONFIG_CFQ_GROUP_IOSCHED=y
++CONFIG_ARCH_BCM2708=y
++CONFIG_PREEMPT=y
++CONFIG_AEABI=y
++CONFIG_CLEANCACHE=y
++CONFIG_FRONTSWAP=y
++CONFIG_UACCESS_WITH_MEMCPY=y
++CONFIG_SECCOMP=y
++CONFIG_CC_STACKPROTECTOR=y
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE="console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait"
++CONFIG_KEXEC=y
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_STAT=m
++CONFIG_CPU_FREQ_STAT_DETAILS=y
++CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
++CONFIG_CPU_IDLE=y
++CONFIG_VFP=y
++CONFIG_BINFMT_MISC=m
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_XFRM_USER=y
++CONFIG_NET_KEY=m
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_ADVANCED_ROUTER=y
++CONFIG_IP_MULTIPLE_TABLES=y
++CONFIG_IP_ROUTE_MULTIPATH=y
++CONFIG_IP_ROUTE_VERBOSE=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_RARP=y
++CONFIG_NET_IPIP=m
++CONFIG_NET_IPGRE_DEMUX=m
++CONFIG_NET_IPGRE=m
++CONFIG_IP_MROUTE=y
++CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
++CONFIG_IP_PIMSM_V1=y
++CONFIG_IP_PIMSM_V2=y
++CONFIG_SYN_COOKIES=y
++CONFIG_INET_AH=m
++CONFIG_INET_ESP=m
++CONFIG_INET_IPCOMP=m
++CONFIG_INET_XFRM_MODE_TRANSPORT=m
++CONFIG_INET_XFRM_MODE_TUNNEL=m
++CONFIG_INET_XFRM_MODE_BEET=m
++CONFIG_INET_LRO=m
++CONFIG_INET_DIAG=m
++CONFIG_IPV6_PRIVACY=y
++CONFIG_INET6_AH=m
++CONFIG_INET6_ESP=m
++CONFIG_INET6_IPCOMP=m
++CONFIG_IPV6_MULTIPLE_TABLES=y
++CONFIG_IPV6_MROUTE=y
++CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
++CONFIG_IPV6_PIMSM_V2=y
++CONFIG_NETFILTER=y
++CONFIG_NF_CONNTRACK=m
++CONFIG_NF_CONNTRACK_ZONES=y
++CONFIG_NF_CONNTRACK_EVENTS=y
++CONFIG_NF_CONNTRACK_TIMESTAMP=y
++CONFIG_NF_CT_PROTO_DCCP=m
++CONFIG_NF_CT_PROTO_UDPLITE=m
++CONFIG_NF_CONNTRACK_AMANDA=m
++CONFIG_NF_CONNTRACK_FTP=m
++CONFIG_NF_CONNTRACK_H323=m
++CONFIG_NF_CONNTRACK_IRC=m
++CONFIG_NF_CONNTRACK_NETBIOS_NS=m
++CONFIG_NF_CONNTRACK_SNMP=m
++CONFIG_NF_CONNTRACK_PPTP=m
++CONFIG_NF_CONNTRACK_SANE=m
++CONFIG_NF_CONNTRACK_SIP=m
++CONFIG_NF_CONNTRACK_TFTP=m
++CONFIG_NF_CT_NETLINK=m
++CONFIG_NETFILTER_TPROXY=m
++CONFIG_NETFILTER_XT_SET=m
++CONFIG_NETFILTER_XT_TARGET_AUDIT=m
++CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
++CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
++CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
++CONFIG_NETFILTER_XT_TARGET_DSCP=m
++CONFIG_NETFILTER_XT_TARGET_HMARK=m
++CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
++CONFIG_NETFILTER_XT_TARGET_LED=m
++CONFIG_NETFILTER_XT_TARGET_LOG=m
++CONFIG_NETFILTER_XT_TARGET_MARK=m
++CONFIG_NETFILTER_XT_TARGET_NFLOG=m
++CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
++CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
++CONFIG_NETFILTER_XT_TARGET_TEE=m
++CONFIG_NETFILTER_XT_TARGET_TPROXY=m
++CONFIG_NETFILTER_XT_TARGET_TRACE=m
++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
++CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
++CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
++CONFIG_NETFILTER_XT_MATCH_BPF=m
++CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
++CONFIG_NETFILTER_XT_MATCH_COMMENT=m
++CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
++CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
++CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
++CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
++CONFIG_NETFILTER_XT_MATCH_CPU=m
++CONFIG_NETFILTER_XT_MATCH_DCCP=m
++CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
++CONFIG_NETFILTER_XT_MATCH_DSCP=m
++CONFIG_NETFILTER_XT_MATCH_ESP=m
++CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
++CONFIG_NETFILTER_XT_MATCH_HELPER=m
++CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
++CONFIG_NETFILTER_XT_MATCH_IPVS=m
++CONFIG_NETFILTER_XT_MATCH_LENGTH=m
++CONFIG_NETFILTER_XT_MATCH_LIMIT=m
++CONFIG_NETFILTER_XT_MATCH_MAC=m
++CONFIG_NETFILTER_XT_MATCH_MARK=m
++CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
++CONFIG_NETFILTER_XT_MATCH_NFACCT=m
++CONFIG_NETFILTER_XT_MATCH_OSF=m
++CONFIG_NETFILTER_XT_MATCH_OWNER=m
++CONFIG_NETFILTER_XT_MATCH_POLICY=m
++CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
++CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
++CONFIG_NETFILTER_XT_MATCH_QUOTA=m
++CONFIG_NETFILTER_XT_MATCH_RATEEST=m
++CONFIG_NETFILTER_XT_MATCH_REALM=m
++CONFIG_NETFILTER_XT_MATCH_RECENT=m
++CONFIG_NETFILTER_XT_MATCH_SOCKET=m
++CONFIG_NETFILTER_XT_MATCH_STATE=m
++CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
++CONFIG_NETFILTER_XT_MATCH_STRING=m
++CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
++CONFIG_NETFILTER_XT_MATCH_TIME=m
++CONFIG_NETFILTER_XT_MATCH_U32=m
++CONFIG_IP_SET=m
++CONFIG_IP_SET_BITMAP_IP=m
++CONFIG_IP_SET_BITMAP_IPMAC=m
++CONFIG_IP_SET_BITMAP_PORT=m
++CONFIG_IP_SET_HASH_IP=m
++CONFIG_IP_SET_HASH_IPPORT=m
++CONFIG_IP_SET_HASH_IPPORTIP=m
++CONFIG_IP_SET_HASH_IPPORTNET=m
++CONFIG_IP_SET_HASH_NET=m
++CONFIG_IP_SET_HASH_NETPORT=m
++CONFIG_IP_SET_HASH_NETIFACE=m
++CONFIG_IP_SET_LIST_SET=m
++CONFIG_IP_VS=m
++CONFIG_IP_VS_PROTO_TCP=y
++CONFIG_IP_VS_PROTO_UDP=y
++CONFIG_IP_VS_PROTO_ESP=y
++CONFIG_IP_VS_PROTO_AH=y
++CONFIG_IP_VS_PROTO_SCTP=y
++CONFIG_IP_VS_RR=m
++CONFIG_IP_VS_WRR=m
++CONFIG_IP_VS_LC=m
++CONFIG_IP_VS_WLC=m
++CONFIG_IP_VS_LBLC=m
++CONFIG_IP_VS_LBLCR=m
++CONFIG_IP_VS_DH=m
++CONFIG_IP_VS_SH=m
++CONFIG_IP_VS_SED=m
++CONFIG_IP_VS_NQ=m
++CONFIG_IP_VS_FTP=m
++CONFIG_IP_VS_PE_SIP=m
++CONFIG_NF_CONNTRACK_IPV4=m
++CONFIG_IP_NF_IPTABLES=m
++CONFIG_IP_NF_MATCH_AH=m
++CONFIG_IP_NF_MATCH_ECN=m
++CONFIG_IP_NF_MATCH_TTL=m
++CONFIG_IP_NF_FILTER=m
++CONFIG_IP_NF_TARGET_REJECT=m
++CONFIG_IP_NF_TARGET_ULOG=m
++CONFIG_NF_NAT_IPV4=m
++CONFIG_IP_NF_TARGET_MASQUERADE=m
++CONFIG_IP_NF_TARGET_NETMAP=m
++CONFIG_IP_NF_TARGET_REDIRECT=m
++CONFIG_IP_NF_MANGLE=m
++CONFIG_IP_NF_TARGET_ECN=m
++CONFIG_IP_NF_TARGET_TTL=m
++CONFIG_IP_NF_RAW=m
++CONFIG_IP_NF_ARPTABLES=m
++CONFIG_IP_NF_ARPFILTER=m
++CONFIG_IP_NF_ARP_MANGLE=m
++CONFIG_NF_CONNTRACK_IPV6=m
++CONFIG_IP6_NF_IPTABLES=m
++CONFIG_IP6_NF_MATCH_AH=m
++CONFIG_IP6_NF_MATCH_EUI64=m
++CONFIG_IP6_NF_MATCH_FRAG=m
++CONFIG_IP6_NF_MATCH_OPTS=m
++CONFIG_IP6_NF_MATCH_HL=m
++CONFIG_IP6_NF_MATCH_IPV6HEADER=m
++CONFIG_IP6_NF_MATCH_MH=m
++CONFIG_IP6_NF_MATCH_RT=m
++CONFIG_IP6_NF_TARGET_HL=m
++CONFIG_IP6_NF_FILTER=m
++CONFIG_IP6_NF_TARGET_REJECT=m
++CONFIG_IP6_NF_MANGLE=m
++CONFIG_IP6_NF_RAW=m
++CONFIG_NF_NAT_IPV6=m
++CONFIG_IP6_NF_TARGET_MASQUERADE=m
++CONFIG_IP6_NF_TARGET_NPT=m
++CONFIG_BRIDGE_NF_EBTABLES=m
++CONFIG_BRIDGE_EBT_BROUTE=m
++CONFIG_BRIDGE_EBT_T_FILTER=m
++CONFIG_BRIDGE_EBT_T_NAT=m
++CONFIG_BRIDGE_EBT_802_3=m
++CONFIG_BRIDGE_EBT_AMONG=m
++CONFIG_BRIDGE_EBT_ARP=m
++CONFIG_BRIDGE_EBT_IP=m
++CONFIG_BRIDGE_EBT_IP6=m
++CONFIG_BRIDGE_EBT_LIMIT=m
++CONFIG_BRIDGE_EBT_MARK=m
++CONFIG_BRIDGE_EBT_PKTTYPE=m
++CONFIG_BRIDGE_EBT_STP=m
++CONFIG_BRIDGE_EBT_VLAN=m
++CONFIG_BRIDGE_EBT_ARPREPLY=m
++CONFIG_BRIDGE_EBT_DNAT=m
++CONFIG_BRIDGE_EBT_MARK_T=m
++CONFIG_BRIDGE_EBT_REDIRECT=m
++CONFIG_BRIDGE_EBT_SNAT=m
++CONFIG_BRIDGE_EBT_LOG=m
++CONFIG_BRIDGE_EBT_ULOG=m
++CONFIG_BRIDGE_EBT_NFLOG=m
++CONFIG_SCTP_COOKIE_HMAC_SHA1=y
++CONFIG_L2TP=m
++CONFIG_BRIDGE=m
++CONFIG_VLAN_8021Q=m
++CONFIG_VLAN_8021Q_GVRP=y
++CONFIG_ATALK=m
++CONFIG_NET_SCHED=y
++CONFIG_NET_SCH_CBQ=m
++CONFIG_NET_SCH_HTB=m
++CONFIG_NET_SCH_HFSC=m
++CONFIG_NET_SCH_PRIO=m
++CONFIG_NET_SCH_MULTIQ=m
++CONFIG_NET_SCH_RED=m
++CONFIG_NET_SCH_SFB=m
++CONFIG_NET_SCH_SFQ=m
++CONFIG_NET_SCH_TEQL=m
++CONFIG_NET_SCH_TBF=m
++CONFIG_NET_SCH_GRED=m
++CONFIG_NET_SCH_DSMARK=m
++CONFIG_NET_SCH_NETEM=m
++CONFIG_NET_SCH_DRR=m
++CONFIG_NET_SCH_MQPRIO=m
++CONFIG_NET_SCH_CHOKE=m
++CONFIG_NET_SCH_QFQ=m
++CONFIG_NET_SCH_CODEL=m
++CONFIG_NET_SCH_FQ_CODEL=m
++CONFIG_NET_SCH_INGRESS=m
++CONFIG_NET_SCH_PLUG=m
++CONFIG_NET_CLS_BASIC=m
++CONFIG_NET_CLS_TCINDEX=m
++CONFIG_NET_CLS_ROUTE4=m
++CONFIG_NET_CLS_FW=m
++CONFIG_NET_CLS_U32=m
++CONFIG_CLS_U32_MARK=y
++CONFIG_NET_CLS_RSVP=m
++CONFIG_NET_CLS_RSVP6=m
++CONFIG_NET_CLS_FLOW=m
++CONFIG_NET_CLS_CGROUP=m
++CONFIG_NET_EMATCH=y
++CONFIG_NET_EMATCH_CMP=m
++CONFIG_NET_EMATCH_NBYTE=m
++CONFIG_NET_EMATCH_U32=m
++CONFIG_NET_EMATCH_META=m
++CONFIG_NET_EMATCH_TEXT=m
++CONFIG_NET_EMATCH_IPSET=m
++CONFIG_NET_CLS_ACT=y
++CONFIG_NET_ACT_POLICE=m
++CONFIG_NET_ACT_GACT=m
++CONFIG_GACT_PROB=y
++CONFIG_NET_ACT_MIRRED=m
++CONFIG_NET_ACT_IPT=m
++CONFIG_NET_ACT_NAT=m
++CONFIG_NET_ACT_PEDIT=m
++CONFIG_NET_ACT_SIMP=m
++CONFIG_NET_ACT_SKBEDIT=m
++CONFIG_NET_ACT_CSUM=m
++CONFIG_BATMAN_ADV=m
++CONFIG_OPENVSWITCH=m
++CONFIG_NET_PKTGEN=m
++CONFIG_HAMRADIO=y
++CONFIG_AX25=m
++CONFIG_NETROM=m
++CONFIG_ROSE=m
++CONFIG_MKISS=m
++CONFIG_6PACK=m
++CONFIG_BPQETHER=m
++CONFIG_BAYCOM_SER_FDX=m
++CONFIG_BAYCOM_SER_HDX=m
++CONFIG_YAM=m
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRNET=m
++CONFIG_IRCOMM=m
++CONFIG_IRDA_ULTRA=y
++CONFIG_IRDA_CACHE_LAST_LSAP=y
++CONFIG_IRDA_FAST_RR=y
++CONFIG_IRTTY_SIR=m
++CONFIG_KINGSUN_DONGLE=m
++CONFIG_KSDAZZLE_DONGLE=m
++CONFIG_KS959_DONGLE=m
++CONFIG_USB_IRDA=m
++CONFIG_SIGMATEL_FIR=m
++CONFIG_MCS_FIR=m
++CONFIG_BT=m
++CONFIG_BT_RFCOMM=m
++CONFIG_BT_RFCOMM_TTY=y
++CONFIG_BT_BNEP=m
++CONFIG_BT_BNEP_MC_FILTER=y
++CONFIG_BT_BNEP_PROTO_FILTER=y
++CONFIG_BT_HIDP=m
++CONFIG_BT_HCIBTUSB=m
++CONFIG_BT_HCIBCM203X=m
++CONFIG_BT_HCIBPA10X=m
++CONFIG_BT_HCIBFUSB=m
++CONFIG_BT_HCIVHCI=m
++CONFIG_BT_MRVL=m
++CONFIG_BT_MRVL_SDIO=m
++CONFIG_BT_ATH3K=m
++CONFIG_BT_WILINK=m
++CONFIG_CFG80211=m
++CONFIG_CFG80211_WEXT=y
++CONFIG_MAC80211=m
++CONFIG_MAC80211_RC_PID=y
++CONFIG_MAC80211_MESH=y
++CONFIG_WIMAX=m
++CONFIG_RFKILL=m
++CONFIG_RFKILL_INPUT=y
++CONFIG_NET_9P=m
++CONFIG_NFC=m
++CONFIG_NFC_PN533=m
++CONFIG_DEVTMPFS=y
++CONFIG_DEVTMPFS_MOUNT=y
++CONFIG_CMA=y
++CONFIG_BLK_DEV_LOOP=y
++CONFIG_BLK_DEV_CRYPTOLOOP=m
++CONFIG_BLK_DEV_DRBD=m
++CONFIG_BLK_DEV_NBD=m
++CONFIG_BLK_DEV_RAM=y
++CONFIG_CDROM_PKTCDVD=m
++CONFIG_SCSI=y
++# CONFIG_SCSI_PROC_FS is not set
++CONFIG_BLK_DEV_SD=y
++CONFIG_CHR_DEV_ST=m
++CONFIG_CHR_DEV_OSST=m
++CONFIG_BLK_DEV_SR=m
++CONFIG_SCSI_MULTI_LUN=y
++CONFIG_SCSI_ISCSI_ATTRS=y
++CONFIG_ISCSI_TCP=m
++CONFIG_ISCSI_BOOT_SYSFS=m
++CONFIG_MD=y
++CONFIG_MD_LINEAR=m
++CONFIG_MD_RAID0=m
++CONFIG_BLK_DEV_DM=m
++CONFIG_DM_CRYPT=m
++CONFIG_DM_SNAPSHOT=m
++CONFIG_DM_MIRROR=m
++CONFIG_DM_RAID=m
++CONFIG_DM_LOG_USERSPACE=m
++CONFIG_DM_ZERO=m
++CONFIG_DM_DELAY=m
++CONFIG_NETDEVICES=y
++CONFIG_BONDING=m
++CONFIG_DUMMY=m
++CONFIG_IFB=m
++CONFIG_MACVLAN=m
++CONFIG_NETCONSOLE=m
++CONFIG_TUN=m
++CONFIG_MDIO_BITBANG=m
++CONFIG_PPP=m
++CONFIG_PPP_BSDCOMP=m
++CONFIG_PPP_DEFLATE=m
++CONFIG_PPP_FILTER=y
++CONFIG_PPP_MPPE=m
++CONFIG_PPP_MULTILINK=y
++CONFIG_PPPOE=m
++CONFIG_PPPOL2TP=m
++CONFIG_PPP_ASYNC=m
++CONFIG_PPP_SYNC_TTY=m
++CONFIG_SLIP=m
++CONFIG_SLIP_COMPRESSED=y
++CONFIG_SLIP_SMART=y
++CONFIG_USB_CATC=m
++CONFIG_USB_KAWETH=m
++CONFIG_USB_PEGASUS=m
++CONFIG_USB_RTL8150=m
++CONFIG_USB_RTL8152=m
++CONFIG_USB_USBNET=y
++CONFIG_USB_NET_AX8817X=m
++CONFIG_USB_NET_CDCETHER=m
++CONFIG_USB_NET_CDC_EEM=m
++CONFIG_USB_NET_CDC_NCM=m
++CONFIG_USB_NET_CDC_MBIM=m
++CONFIG_USB_NET_DM9601=m
++CONFIG_USB_NET_SMSC75XX=m
++CONFIG_USB_NET_SMSC95XX=y
++CONFIG_USB_NET_GL620A=m
++CONFIG_USB_NET_NET1080=m
++CONFIG_USB_NET_PLUSB=m
++CONFIG_USB_NET_MCS7830=m
++CONFIG_USB_NET_CDC_SUBSET=m
++CONFIG_USB_ALI_M5632=y
++CONFIG_USB_AN2720=y
++CONFIG_USB_EPSON2888=y
++CONFIG_USB_KC2190=y
++CONFIG_USB_NET_ZAURUS=m
++CONFIG_USB_NET_CX82310_ETH=m
++CONFIG_USB_NET_KALMIA=m
++CONFIG_USB_NET_QMI_WWAN=m
++CONFIG_USB_NET_INT51X1=m
++CONFIG_USB_IPHETH=m
++CONFIG_USB_SIERRA_NET=m
++CONFIG_USB_VL600=m
++CONFIG_LIBERTAS_THINFIRM=m
++CONFIG_LIBERTAS_THINFIRM_USB=m
++CONFIG_AT76C50X_USB=m
++CONFIG_USB_ZD1201=m
++CONFIG_USB_NET_RNDIS_WLAN=m
++CONFIG_RTL8187=m
++CONFIG_MAC80211_HWSIM=m
++CONFIG_ATH_CARDS=m
++CONFIG_ATH9K=m
++CONFIG_ATH9K_HTC=m
++CONFIG_CARL9170=m
++CONFIG_ATH6KL=m
++CONFIG_ATH6KL_USB=m
++CONFIG_AR5523=m
++CONFIG_B43=m
++# CONFIG_B43_PHY_N is not set
++CONFIG_B43LEGACY=m
++CONFIG_HOSTAP=m
++CONFIG_LIBERTAS=m
++CONFIG_LIBERTAS_USB=m
++CONFIG_LIBERTAS_SDIO=m
++CONFIG_P54_COMMON=m
++CONFIG_P54_USB=m
++CONFIG_RT2X00=m
++CONFIG_RT2500USB=m
++CONFIG_RT73USB=m
++CONFIG_RT2800USB=m
++CONFIG_RT2800USB_RT53XX=y
++CONFIG_RT2800USB_UNKNOWN=y
++CONFIG_RTL8192CU=m
++CONFIG_ZD1211RW=m
++CONFIG_MWIFIEX=m
++CONFIG_MWIFIEX_SDIO=m
++CONFIG_WIMAX_I2400M_USB=m
++CONFIG_INPUT_POLLDEV=m
++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_JOYDEV=m
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_JOYSTICK=y
++CONFIG_JOYSTICK_IFORCE=m
++CONFIG_JOYSTICK_IFORCE_USB=y
++CONFIG_JOYSTICK_XPAD=y
++CONFIG_JOYSTICK_XPAD_FF=y
++CONFIG_INPUT_MISC=y
++CONFIG_INPUT_AD714X=m
++CONFIG_INPUT_ATI_REMOTE2=m
++CONFIG_INPUT_KEYSPAN_REMOTE=m
++CONFIG_INPUT_POWERMATE=m
++CONFIG_INPUT_YEALINK=m
++CONFIG_INPUT_CM109=m
++CONFIG_INPUT_UINPUT=m
++CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
++CONFIG_INPUT_ADXL34X=m
++CONFIG_INPUT_CMA3000=m
++CONFIG_SERIO=m
++CONFIG_SERIO_RAW=m
++CONFIG_GAMEPORT=m
++CONFIG_GAMEPORT_NS558=m
++CONFIG_GAMEPORT_L4=m
++CONFIG_VT_HW_CONSOLE_BINDING=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_AMBA_PL011=y
++CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
++CONFIG_TTY_PRINTK=y
++CONFIG_HW_RANDOM=y
++CONFIG_HW_RANDOM_BCM2708=m
++CONFIG_RAW_DRIVER=y
++CONFIG_BRCM_CHAR_DRIVERS=y
++CONFIG_BCM_VC_CMA=y
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=m
++CONFIG_I2C_BCM2708=m
++CONFIG_SPI=y
++CONFIG_SPI_BCM2708=m
++CONFIG_SPI_SPIDEV=y
++CONFIG_GPIO_SYSFS=y
++CONFIG_W1=m
++CONFIG_W1_MASTER_DS2490=m
++CONFIG_W1_MASTER_DS2482=m
++CONFIG_W1_MASTER_DS1WM=m
++CONFIG_W1_MASTER_GPIO=m
++CONFIG_W1_SLAVE_THERM=m
++CONFIG_W1_SLAVE_SMEM=m
++CONFIG_W1_SLAVE_DS2408=m
++CONFIG_W1_SLAVE_DS2413=m
++CONFIG_W1_SLAVE_DS2423=m
++CONFIG_W1_SLAVE_DS2431=m
++CONFIG_W1_SLAVE_DS2433=m
++CONFIG_W1_SLAVE_DS2760=m
++CONFIG_W1_SLAVE_DS2780=m
++CONFIG_W1_SLAVE_DS2781=m
++CONFIG_W1_SLAVE_DS28E04=m
++CONFIG_W1_SLAVE_BQ27000=m
++CONFIG_BATTERY_DS2760=m
++# CONFIG_HWMON is not set
++CONFIG_THERMAL=y
++CONFIG_THERMAL_BCM2835=y
++CONFIG_WATCHDOG=y
++CONFIG_BCM2708_WDT=m
++CONFIG_MEDIA_SUPPORT=m
++CONFIG_MEDIA_CAMERA_SUPPORT=y
++CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
++CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
++CONFIG_MEDIA_RADIO_SUPPORT=y
++CONFIG_MEDIA_RC_SUPPORT=y
++CONFIG_MEDIA_CONTROLLER=y
++CONFIG_LIRC=m
++CONFIG_RC_DEVICES=y
++CONFIG_RC_ATI_REMOTE=m
++CONFIG_IR_IMON=m
++CONFIG_IR_MCEUSB=m
++CONFIG_IR_REDRAT3=m
++CONFIG_IR_STREAMZAP=m
++CONFIG_IR_IGUANA=m
++CONFIG_IR_TTUSBIR=m
++CONFIG_RC_LOOPBACK=m
++CONFIG_IR_GPIO_CIR=m
++CONFIG_MEDIA_USB_SUPPORT=y
++CONFIG_USB_VIDEO_CLASS=m
++CONFIG_USB_M5602=m
++CONFIG_USB_STV06XX=m
++CONFIG_USB_GL860=m
++CONFIG_USB_GSPCA_BENQ=m
++CONFIG_USB_GSPCA_CONEX=m
++CONFIG_USB_GSPCA_CPIA1=m
++CONFIG_USB_GSPCA_ETOMS=m
++CONFIG_USB_GSPCA_FINEPIX=m
++CONFIG_USB_GSPCA_JEILINJ=m
++CONFIG_USB_GSPCA_JL2005BCD=m
++CONFIG_USB_GSPCA_KINECT=m
++CONFIG_USB_GSPCA_KONICA=m
++CONFIG_USB_GSPCA_MARS=m
++CONFIG_USB_GSPCA_MR97310A=m
++CONFIG_USB_GSPCA_NW80X=m
++CONFIG_USB_GSPCA_OV519=m
++CONFIG_USB_GSPCA_OV534=m
++CONFIG_USB_GSPCA_OV534_9=m
++CONFIG_USB_GSPCA_PAC207=m
++CONFIG_USB_GSPCA_PAC7302=m
++CONFIG_USB_GSPCA_PAC7311=m
++CONFIG_USB_GSPCA_SE401=m
++CONFIG_USB_GSPCA_SN9C2028=m
++CONFIG_USB_GSPCA_SN9C20X=m
++CONFIG_USB_GSPCA_SONIXB=m
++CONFIG_USB_GSPCA_SONIXJ=m
++CONFIG_USB_GSPCA_SPCA500=m
++CONFIG_USB_GSPCA_SPCA501=m
++CONFIG_USB_GSPCA_SPCA505=m
++CONFIG_USB_GSPCA_SPCA506=m
++CONFIG_USB_GSPCA_SPCA508=m
++CONFIG_USB_GSPCA_SPCA561=m
++CONFIG_USB_GSPCA_SPCA1528=m
++CONFIG_USB_GSPCA_SQ905=m
++CONFIG_USB_GSPCA_SQ905C=m
++CONFIG_USB_GSPCA_SQ930X=m
++CONFIG_USB_GSPCA_STK014=m
++CONFIG_USB_GSPCA_STV0680=m
++CONFIG_USB_GSPCA_SUNPLUS=m
++CONFIG_USB_GSPCA_T613=m
++CONFIG_USB_GSPCA_TOPRO=m
++CONFIG_USB_GSPCA_TV8532=m
++CONFIG_USB_GSPCA_VC032X=m
++CONFIG_USB_GSPCA_VICAM=m
++CONFIG_USB_GSPCA_XIRLINK_CIT=m
++CONFIG_USB_GSPCA_ZC3XX=m
++CONFIG_USB_PWC=m
++CONFIG_VIDEO_CPIA2=m
++CONFIG_USB_ZR364XX=m
++CONFIG_USB_STKWEBCAM=m
++CONFIG_USB_S2255=m
++CONFIG_USB_SN9C102=m
++CONFIG_VIDEO_PVRUSB2=m
++CONFIG_VIDEO_HDPVR=m
++CONFIG_VIDEO_TLG2300=m
++CONFIG_VIDEO_USBVISION=m
++CONFIG_VIDEO_STK1160=m
++CONFIG_VIDEO_STK1160_AC97=y
++CONFIG_VIDEO_AU0828=m
++CONFIG_VIDEO_CX231XX=m
++CONFIG_VIDEO_CX231XX_ALSA=m
++CONFIG_VIDEO_CX231XX_DVB=m
++CONFIG_VIDEO_TM6000=m
++CONFIG_VIDEO_TM6000_ALSA=m
++CONFIG_VIDEO_TM6000_DVB=m
++CONFIG_DVB_USB=m
++CONFIG_DVB_USB_A800=m
++CONFIG_DVB_USB_DIBUSB_MB=m
++CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
++CONFIG_DVB_USB_DIBUSB_MC=m
++CONFIG_DVB_USB_DIB0700=m
++CONFIG_DVB_USB_UMT_010=m
++CONFIG_DVB_USB_CXUSB=m
++CONFIG_DVB_USB_M920X=m
++CONFIG_DVB_USB_DIGITV=m
++CONFIG_DVB_USB_VP7045=m
++CONFIG_DVB_USB_VP702X=m
++CONFIG_DVB_USB_GP8PSK=m
++CONFIG_DVB_USB_NOVA_T_USB2=m
++CONFIG_DVB_USB_TTUSB2=m
++CONFIG_DVB_USB_DTT200U=m
++CONFIG_DVB_USB_OPERA1=m
++CONFIG_DVB_USB_AF9005=m
++CONFIG_DVB_USB_AF9005_REMOTE=m
++CONFIG_DVB_USB_PCTV452E=m
++CONFIG_DVB_USB_DW2102=m
++CONFIG_DVB_USB_CINERGY_T2=m
++CONFIG_DVB_USB_DTV5100=m
++CONFIG_DVB_USB_FRIIO=m
++CONFIG_DVB_USB_AZ6027=m
++CONFIG_DVB_USB_TECHNISAT_USB2=m
++CONFIG_DVB_USB_V2=m
++CONFIG_DVB_USB_AF9015=m
++CONFIG_DVB_USB_AF9035=m
++CONFIG_DVB_USB_ANYSEE=m
++CONFIG_DVB_USB_AU6610=m
++CONFIG_DVB_USB_AZ6007=m
++CONFIG_DVB_USB_CE6230=m
++CONFIG_DVB_USB_EC168=m
++CONFIG_DVB_USB_GL861=m
++CONFIG_DVB_USB_IT913X=m
++CONFIG_DVB_USB_LME2510=m
++CONFIG_DVB_USB_MXL111SF=m
++CONFIG_DVB_USB_RTL28XXU=m
++CONFIG_SMS_USB_DRV=m
++CONFIG_DVB_B2C2_FLEXCOP_USB=m
++CONFIG_VIDEO_EM28XX=m
++CONFIG_VIDEO_EM28XX_ALSA=m
++CONFIG_VIDEO_EM28XX_DVB=m
++CONFIG_V4L_PLATFORM_DRIVERS=y
++CONFIG_VIDEO_BCM2835=y
++CONFIG_VIDEO_BCM2835_MMAL=m
++CONFIG_RADIO_SI470X=y
++CONFIG_USB_SI470X=m
++CONFIG_I2C_SI470X=m
++CONFIG_USB_MR800=m
++CONFIG_USB_DSBR=m
++CONFIG_RADIO_SHARK=m
++CONFIG_RADIO_SHARK2=m
++CONFIG_RADIO_SI4713=m
++CONFIG_USB_KEENE=m
++CONFIG_USB_MA901=m
++CONFIG_RADIO_TEA5764=m
++CONFIG_RADIO_SAA7706H=m
++CONFIG_RADIO_TEF6862=m
++CONFIG_RADIO_WL1273=m
++CONFIG_RADIO_WL128X=m
++CONFIG_FB=y
++CONFIG_FB_BCM2708=y
++# CONFIG_BACKLIGHT_GENERIC is not set
++CONFIG_FRAMEBUFFER_CONSOLE=y
++CONFIG_LOGO=y
++# CONFIG_LOGO_LINUX_MONO is not set
++# CONFIG_LOGO_LINUX_VGA16 is not set
++CONFIG_SOUND=y
++CONFIG_SND=m
++CONFIG_SND_SEQUENCER=m
++CONFIG_SND_SEQ_DUMMY=m
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_SEQUENCER_OSS=y
++CONFIG_SND_HRTIMER=m
++CONFIG_SND_DUMMY=m
++CONFIG_SND_ALOOP=m
++CONFIG_SND_VIRMIDI=m
++CONFIG_SND_MTPAV=m
++CONFIG_SND_SERIAL_U16550=m
++CONFIG_SND_MPU401=m
++CONFIG_SND_BCM2835=m
++CONFIG_SND_USB_AUDIO=m
++CONFIG_SND_USB_UA101=m
++CONFIG_SND_USB_CAIAQ=m
++CONFIG_SND_USB_CAIAQ_INPUT=y
++CONFIG_SND_USB_6FIRE=m
++CONFIG_SND_SOC=m
++CONFIG_SND_SOC_DMAENGINE_PCM=y
++CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
++CONFIG_SND_BCM2708_SOC_I2S=m
++CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC=m
++CONFIG_SND_BCM2708_SOC_RPI_DAC=m
++CONFIG_SND_SOC_I2C_AND_SPI=m
++CONFIG_SND_SOC_PCM5102A=m
++CONFIG_SND_SOC_PCM1794A=m
++CONFIG_SOUND_PRIME=m
++CONFIG_HIDRAW=y
++CONFIG_HID_A4TECH=m
++CONFIG_HID_ACRUX=m
++CONFIG_HID_APPLE=m
++CONFIG_HID_BELKIN=m
++CONFIG_HID_CHERRY=m
++CONFIG_HID_CHICONY=m
++CONFIG_HID_CYPRESS=m
++CONFIG_HID_DRAGONRISE=m
++CONFIG_HID_EMS_FF=m
++CONFIG_HID_ELECOM=m
++CONFIG_HID_EZKEY=m
++CONFIG_HID_HOLTEK=m
++CONFIG_HID_KEYTOUCH=m
++CONFIG_HID_KYE=m
++CONFIG_HID_UCLOGIC=m
++CONFIG_HID_WALTOP=m
++CONFIG_HID_GYRATION=m
++CONFIG_HID_TWINHAN=m
++CONFIG_HID_KENSINGTON=m
++CONFIG_HID_LCPOWER=m
++CONFIG_HID_LOGITECH=m
++CONFIG_HID_MAGICMOUSE=m
++CONFIG_HID_MICROSOFT=m
++CONFIG_HID_MONTEREY=m
++CONFIG_HID_MULTITOUCH=m
++CONFIG_HID_NTRIG=m
++CONFIG_HID_ORTEK=m
++CONFIG_HID_PANTHERLORD=m
++CONFIG_HID_PETALYNX=m
++CONFIG_HID_PICOLCD=m
++CONFIG_HID_ROCCAT=m
++CONFIG_HID_SAMSUNG=m
++CONFIG_HID_SONY=m
++CONFIG_HID_SPEEDLINK=m
++CONFIG_HID_SUNPLUS=m
++CONFIG_HID_GREENASIA=m
++CONFIG_HID_SMARTJOYPLUS=m
++CONFIG_HID_TOPSEED=m
++CONFIG_HID_THINGM=m
++CONFIG_HID_THRUSTMASTER=m
++CONFIG_HID_WACOM=m
++CONFIG_HID_WIIMOTE=m
++CONFIG_HID_ZEROPLUS=m
++CONFIG_HID_ZYDACRON=m
++CONFIG_HID_PID=y
++CONFIG_USB_HIDDEV=y
++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
++CONFIG_USB_MON=m
++CONFIG_USB_DWCOTG=y
++CONFIG_USB_PRINTER=m
++CONFIG_USB_STORAGE=y
++CONFIG_USB_STORAGE_REALTEK=m
++CONFIG_USB_STORAGE_DATAFAB=m
++CONFIG_USB_STORAGE_FREECOM=m
++CONFIG_USB_STORAGE_ISD200=m
++CONFIG_USB_STORAGE_USBAT=m
++CONFIG_USB_STORAGE_SDDR09=m
++CONFIG_USB_STORAGE_SDDR55=m
++CONFIG_USB_STORAGE_JUMPSHOT=m
++CONFIG_USB_STORAGE_ALAUDA=m
++CONFIG_USB_STORAGE_ONETOUCH=m
++CONFIG_USB_STORAGE_KARMA=m
++CONFIG_USB_STORAGE_CYPRESS_ATACB=m
++CONFIG_USB_STORAGE_ENE_UB6250=m
++CONFIG_USB_MDC800=m
++CONFIG_USB_MICROTEK=m
++CONFIG_USB_SERIAL=m
++CONFIG_USB_SERIAL_GENERIC=y
++CONFIG_USB_SERIAL_AIRCABLE=m
++CONFIG_USB_SERIAL_ARK3116=m
++CONFIG_USB_SERIAL_BELKIN=m
++CONFIG_USB_SERIAL_CH341=m
++CONFIG_USB_SERIAL_WHITEHEAT=m
++CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
++CONFIG_USB_SERIAL_CP210X=m
++CONFIG_USB_SERIAL_CYPRESS_M8=m
++CONFIG_USB_SERIAL_EMPEG=m
++CONFIG_USB_SERIAL_FTDI_SIO=m
++CONFIG_USB_SERIAL_FUNSOFT=m
++CONFIG_USB_SERIAL_VISOR=m
++CONFIG_USB_SERIAL_IPAQ=m
++CONFIG_USB_SERIAL_IR=m
++CONFIG_USB_SERIAL_EDGEPORT=m
++CONFIG_USB_SERIAL_EDGEPORT_TI=m
++CONFIG_USB_SERIAL_F81232=m
++CONFIG_USB_SERIAL_GARMIN=m
++CONFIG_USB_SERIAL_IPW=m
++CONFIG_USB_SERIAL_IUU=m
++CONFIG_USB_SERIAL_KEYSPAN_PDA=m
++CONFIG_USB_SERIAL_KEYSPAN=m
++CONFIG_USB_SERIAL_KLSI=m
++CONFIG_USB_SERIAL_KOBIL_SCT=m
++CONFIG_USB_SERIAL_MCT_U232=m
++CONFIG_USB_SERIAL_METRO=m
++CONFIG_USB_SERIAL_MOS7720=m
++CONFIG_USB_SERIAL_MOS7840=m
++CONFIG_USB_SERIAL_MOTOROLA=m
++CONFIG_USB_SERIAL_NAVMAN=m
++CONFIG_USB_SERIAL_PL2303=m
++CONFIG_USB_SERIAL_OTI6858=m
++CONFIG_USB_SERIAL_QCAUX=m
++CONFIG_USB_SERIAL_QUALCOMM=m
++CONFIG_USB_SERIAL_SPCP8X5=m
++CONFIG_USB_SERIAL_HP4X=m
++CONFIG_USB_SERIAL_SAFE=m
++CONFIG_USB_SERIAL_SIEMENS_MPI=m
++CONFIG_USB_SERIAL_SIERRAWIRELESS=m
++CONFIG_USB_SERIAL_SYMBOL=m
++CONFIG_USB_SERIAL_TI=m
++CONFIG_USB_SERIAL_CYBERJACK=m
++CONFIG_USB_SERIAL_XIRCOM=m
++CONFIG_USB_SERIAL_OPTION=m
++CONFIG_USB_SERIAL_OMNINET=m
++CONFIG_USB_SERIAL_OPTICON=m
++CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
++CONFIG_USB_SERIAL_XSENS_MT=m
++CONFIG_USB_SERIAL_ZIO=m
++CONFIG_USB_SERIAL_WISHBONE=m
++CONFIG_USB_SERIAL_ZTE=m
++CONFIG_USB_SERIAL_SSU100=m
++CONFIG_USB_SERIAL_QT2=m
++CONFIG_USB_SERIAL_DEBUG=m
++CONFIG_USB_EMI62=m
++CONFIG_USB_EMI26=m
++CONFIG_USB_ADUTUX=m
++CONFIG_USB_SEVSEG=m
++CONFIG_USB_RIO500=m
++CONFIG_USB_LEGOTOWER=m
++CONFIG_USB_LCD=m
++CONFIG_USB_LED=m
++CONFIG_USB_CYPRESS_CY7C63=m
++CONFIG_USB_CYTHERM=m
++CONFIG_USB_IDMOUSE=m
++CONFIG_USB_FTDI_ELAN=m
++CONFIG_USB_APPLEDISPLAY=m
++CONFIG_USB_LD=m
++CONFIG_USB_TRANCEVIBRATOR=m
++CONFIG_USB_IOWARRIOR=m
++CONFIG_USB_TEST=m
++CONFIG_USB_ISIGHTFW=m
++CONFIG_USB_YUREX=m
++CONFIG_MMC=y
++CONFIG_MMC_BLOCK_MINORS=32
++CONFIG_MMC_SDHCI=y
++CONFIG_MMC_SDHCI_PLTFM=y
++CONFIG_MMC_SDHCI_BCM2708=y
++CONFIG_MMC_SDHCI_BCM2708_DMA=y
++CONFIG_MMC_SPI=m
++CONFIG_LEDS_GPIO=m
++CONFIG_LEDS_TRIGGER_TIMER=y
++CONFIG_LEDS_TRIGGER_ONESHOT=y
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++CONFIG_LEDS_TRIGGER_BACKLIGHT=y
++CONFIG_LEDS_TRIGGER_CPU=y
++CONFIG_LEDS_TRIGGER_GPIO=y
++CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
++CONFIG_LEDS_TRIGGER_TRANSIENT=m
++CONFIG_LEDS_TRIGGER_CAMERA=m
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_DRV_DS1307=m
++CONFIG_RTC_DRV_DS1374=m
++CONFIG_RTC_DRV_DS1672=m
++CONFIG_RTC_DRV_DS3232=m
++CONFIG_RTC_DRV_MAX6900=m
++CONFIG_RTC_DRV_RS5C372=m
++CONFIG_RTC_DRV_ISL1208=m
++CONFIG_RTC_DRV_ISL12022=m
++CONFIG_RTC_DRV_X1205=m
++CONFIG_RTC_DRV_PCF8523=m
++CONFIG_RTC_DRV_PCF8563=m
++CONFIG_RTC_DRV_PCF8583=m
++CONFIG_RTC_DRV_M41T80=m
++CONFIG_RTC_DRV_BQ32K=m
++CONFIG_RTC_DRV_S35390A=m
++CONFIG_RTC_DRV_FM3130=m
++CONFIG_RTC_DRV_RX8581=m
++CONFIG_RTC_DRV_RX8025=m
++CONFIG_RTC_DRV_EM3027=m
++CONFIG_RTC_DRV_RV3029C2=m
++CONFIG_RTC_DRV_M41T93=m
++CONFIG_RTC_DRV_M41T94=m
++CONFIG_RTC_DRV_DS1305=m
++CONFIG_RTC_DRV_DS1390=m
++CONFIG_RTC_DRV_MAX6902=m
++CONFIG_RTC_DRV_R9701=m
++CONFIG_RTC_DRV_RS5C348=m
++CONFIG_RTC_DRV_DS3234=m
++CONFIG_RTC_DRV_PCF2123=m
++CONFIG_RTC_DRV_RX4581=m
++CONFIG_DMADEVICES=y
++CONFIG_DMA_BCM2708=m
++CONFIG_DMA_ENGINE=y
++CONFIG_DMA_VIRTUAL_CHANNELS=m
++CONFIG_UIO=m
++CONFIG_UIO_PDRV=m
++CONFIG_UIO_PDRV_GENIRQ=m
++CONFIG_STAGING=y
++CONFIG_W35UND=m
++CONFIG_PRISM2_USB=m
++CONFIG_R8712U=m
++CONFIG_VT6656=m
++CONFIG_SPEAKUP=m
++CONFIG_SPEAKUP_SYNTH_SOFT=m
++CONFIG_STAGING_MEDIA=y
++CONFIG_DVB_AS102=m
++CONFIG_LIRC_STAGING=y
++CONFIG_LIRC_IGORPLUGUSB=m
++CONFIG_LIRC_IMON=m
++CONFIG_LIRC_RPI=m
++CONFIG_LIRC_SASEM=m
++CONFIG_LIRC_SERIAL=m
++# CONFIG_IOMMU_SUPPORT is not set
++CONFIG_EXT4_FS=y
++CONFIG_EXT4_FS_POSIX_ACL=y
++CONFIG_EXT4_FS_SECURITY=y
++CONFIG_REISERFS_FS=m
++CONFIG_REISERFS_FS_XATTR=y
++CONFIG_REISERFS_FS_POSIX_ACL=y
++CONFIG_REISERFS_FS_SECURITY=y
++CONFIG_JFS_FS=m
++CONFIG_JFS_POSIX_ACL=y
++CONFIG_JFS_SECURITY=y
++CONFIG_JFS_STATISTICS=y
++CONFIG_XFS_FS=m
++CONFIG_XFS_QUOTA=y
++CONFIG_XFS_POSIX_ACL=y
++CONFIG_XFS_RT=y
++CONFIG_GFS2_FS=m
++CONFIG_OCFS2_FS=m
++CONFIG_BTRFS_FS=m
++CONFIG_BTRFS_FS_POSIX_ACL=y
++CONFIG_NILFS2_FS=m
++CONFIG_FANOTIFY=y
++CONFIG_QFMT_V1=m
++CONFIG_QFMT_V2=m
++CONFIG_AUTOFS4_FS=y
++CONFIG_FUSE_FS=m
++CONFIG_CUSE=m
++CONFIG_FSCACHE=y
++CONFIG_FSCACHE_STATS=y
++CONFIG_FSCACHE_HISTOGRAM=y
++CONFIG_CACHEFILES=y
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++CONFIG_ZISOFS=y
++CONFIG_UDF_FS=m
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
++CONFIG_NTFS_FS=m
++CONFIG_NTFS_RW=y
++CONFIG_TMPFS=y
++CONFIG_TMPFS_POSIX_ACL=y
++CONFIG_CONFIGFS_FS=y
++CONFIG_ECRYPT_FS=m
++CONFIG_HFS_FS=m
++CONFIG_HFSPLUS_FS=m
++CONFIG_SQUASHFS=m
++CONFIG_SQUASHFS_XATTR=y
++CONFIG_SQUASHFS_LZO=y
++CONFIG_SQUASHFS_XZ=y
++CONFIG_F2FS_FS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3_ACL=y
++CONFIG_NFS_V4=y
++CONFIG_ROOT_NFS=y
++CONFIG_NFS_FSCACHE=y
++CONFIG_NFSD=m
++CONFIG_NFSD_V3_ACL=y
++CONFIG_NFSD_V4=y
++CONFIG_CIFS=m
++CONFIG_CIFS_WEAK_PW_HASH=y
++CONFIG_CIFS_XATTR=y
++CONFIG_CIFS_POSIX=y
++CONFIG_9P_FS=m
++CONFIG_9P_FS_POSIX_ACL=y
++CONFIG_NLS_DEFAULT="utf8"
++CONFIG_NLS_CODEPAGE_437=y
++CONFIG_NLS_CODEPAGE_737=m
++CONFIG_NLS_CODEPAGE_775=m
++CONFIG_NLS_CODEPAGE_850=m
++CONFIG_NLS_CODEPAGE_852=m
++CONFIG_NLS_CODEPAGE_855=m
++CONFIG_NLS_CODEPAGE_857=m
++CONFIG_NLS_CODEPAGE_860=m
++CONFIG_NLS_CODEPAGE_861=m
++CONFIG_NLS_CODEPAGE_862=m
++CONFIG_NLS_CODEPAGE_863=m
++CONFIG_NLS_CODEPAGE_864=m
++CONFIG_NLS_CODEPAGE_865=m
++CONFIG_NLS_CODEPAGE_866=m
++CONFIG_NLS_CODEPAGE_869=m
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_CODEPAGE_950=m
++CONFIG_NLS_CODEPAGE_932=m
++CONFIG_NLS_CODEPAGE_949=m
++CONFIG_NLS_CODEPAGE_874=m
++CONFIG_NLS_ISO8859_8=m
++CONFIG_NLS_CODEPAGE_1250=m
++CONFIG_NLS_CODEPAGE_1251=m
++CONFIG_NLS_ASCII=y
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_ISO8859_2=m
++CONFIG_NLS_ISO8859_3=m
++CONFIG_NLS_ISO8859_4=m
++CONFIG_NLS_ISO8859_5=m
++CONFIG_NLS_ISO8859_6=m
++CONFIG_NLS_ISO8859_7=m
++CONFIG_NLS_ISO8859_9=m
++CONFIG_NLS_ISO8859_13=m
++CONFIG_NLS_ISO8859_14=m
++CONFIG_NLS_ISO8859_15=m
++CONFIG_NLS_KOI8_R=m
++CONFIG_NLS_KOI8_U=m
++CONFIG_DLM=m
++CONFIG_PRINTK_TIME=y
++CONFIG_BOOT_PRINTK_DELAY=y
++CONFIG_DEBUG_FS=y
++CONFIG_DEBUG_MEMORY_INIT=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_TIMER_STATS=y
++# CONFIG_DEBUG_PREEMPT is not set
++CONFIG_LATENCYTOP=y
++# CONFIG_KPROBE_EVENT is not set
++CONFIG_KGDB=y
++CONFIG_KGDB_KDB=y
++CONFIG_KDB_KEYBOARD=y
++CONFIG_STRICT_DEVMEM=y
++CONFIG_CRYPTO_USER=m
++CONFIG_CRYPTO_NULL=m
++CONFIG_CRYPTO_CRYPTD=m
++CONFIG_CRYPTO_SEQIV=m
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_XTS=m
++CONFIG_CRYPTO_XCBC=m
++CONFIG_CRYPTO_SHA1_ARM=m
++CONFIG_CRYPTO_SHA512=m
++CONFIG_CRYPTO_TGR192=m
++CONFIG_CRYPTO_WP512=m
++CONFIG_CRYPTO_AES_ARM=m
++CONFIG_CRYPTO_CAST5=m
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++# CONFIG_CRYPTO_HW is not set
++CONFIG_CRC_ITU_T=y
++CONFIG_LIBCRC32C=y
+diff -Nur linux-3.12.6/arch/arm/configs/bcmrpi_emergency_defconfig linux-raspberry-pi/arch/arm/configs/bcmrpi_emergency_defconfig
+--- linux-3.12.6/arch/arm/configs/bcmrpi_emergency_defconfig	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/configs/bcmrpi_emergency_defconfig	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,532 @@
++CONFIG_EXPERIMENTAL=y
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SYSVIPC=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_BSD_PROCESS_ACCT=y
++CONFIG_BSD_PROCESS_ACCT_V3=y
++CONFIG_FHANDLE=y
++CONFIG_AUDIT=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE="../target_fs"
++CONFIG_CGROUP_FREEZER=y
++CONFIG_CGROUP_DEVICE=y
++CONFIG_CGROUP_CPUACCT=y
++CONFIG_RESOURCE_COUNTERS=y
++CONFIG_BLK_CGROUP=y
++CONFIG_NAMESPACES=y
++CONFIG_SCHED_AUTOGROUP=y
++CONFIG_EMBEDDED=y
++# CONFIG_COMPAT_BRK is not set
++CONFIG_SLAB=y
++CONFIG_PROFILING=y
++CONFIG_OPROFILE=m
++CONFIG_KPROBES=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODVERSIONS=y
++CONFIG_MODULE_SRCVERSION_ALL=y
++# CONFIG_BLK_DEV_BSG is not set
++CONFIG_BLK_DEV_THROTTLING=y
++CONFIG_CFQ_GROUP_IOSCHED=y
++CONFIG_ARCH_BCM2708=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_AEABI=y
++CONFIG_SECCOMP=y
++CONFIG_CC_STACKPROTECTOR=y
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext3 rootwait"
++CONFIG_KEXEC=y
++CONFIG_CPU_IDLE=y
++CONFIG_VFP=y
++CONFIG_BINFMT_MISC=m
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_XFRM_USER=y
++CONFIG_NET_KEY=m
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_RARP=y
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++CONFIG_NET_PKTGEN=m
++CONFIG_IRDA=m
++CONFIG_IRLAN=m
++CONFIG_IRCOMM=m
++CONFIG_IRDA_ULTRA=y
++CONFIG_IRDA_CACHE_LAST_LSAP=y
++CONFIG_IRDA_FAST_RR=y
++CONFIG_IRTTY_SIR=m
++CONFIG_KINGSUN_DONGLE=m
++CONFIG_KSDAZZLE_DONGLE=m
++CONFIG_KS959_DONGLE=m
++CONFIG_USB_IRDA=m
++CONFIG_SIGMATEL_FIR=m
++CONFIG_MCS_FIR=m
++CONFIG_BT=m
++CONFIG_BT_L2CAP=y
++CONFIG_BT_SCO=y
++CONFIG_BT_RFCOMM=m
++CONFIG_BT_RFCOMM_TTY=y
++CONFIG_BT_BNEP=m
++CONFIG_BT_BNEP_MC_FILTER=y
++CONFIG_BT_BNEP_PROTO_FILTER=y
++CONFIG_BT_HIDP=m
++CONFIG_BT_HCIBTUSB=m
++CONFIG_BT_HCIBCM203X=m
++CONFIG_BT_HCIBPA10X=m
++CONFIG_BT_HCIBFUSB=m
++CONFIG_BT_HCIVHCI=m
++CONFIG_BT_MRVL=m
++CONFIG_BT_MRVL_SDIO=m
++CONFIG_BT_ATH3K=m
++CONFIG_CFG80211=m
++CONFIG_MAC80211=m
++CONFIG_MAC80211_RC_PID=y
++CONFIG_MAC80211_MESH=y
++CONFIG_WIMAX=m
++CONFIG_NET_9P=m
++CONFIG_NFC=m
++CONFIG_NFC_PN533=m
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_BLK_DEV_LOOP=y
++CONFIG_BLK_DEV_CRYPTOLOOP=m
++CONFIG_BLK_DEV_NBD=m
++CONFIG_BLK_DEV_RAM=y
++CONFIG_CDROM_PKTCDVD=m
++CONFIG_MISC_DEVICES=y
++CONFIG_SCSI=y
++# CONFIG_SCSI_PROC_FS is not set
++CONFIG_BLK_DEV_SD=y
++CONFIG_BLK_DEV_SR=m
++CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_LOWLEVEL is not set
++CONFIG_MD=y
++CONFIG_NETDEVICES=y
++CONFIG_TUN=m
++CONFIG_PHYLIB=m
++CONFIG_MDIO_BITBANG=m
++CONFIG_NET_ETHERNET=y
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++CONFIG_LIBERTAS_THINFIRM=m
++CONFIG_LIBERTAS_THINFIRM_USB=m
++CONFIG_AT76C50X_USB=m
++CONFIG_USB_ZD1201=m
++CONFIG_USB_NET_RNDIS_WLAN=m
++CONFIG_RTL8187=m
++CONFIG_MAC80211_HWSIM=m
++CONFIG_ATH_COMMON=m
++CONFIG_ATH9K=m
++CONFIG_ATH9K_HTC=m
++CONFIG_CARL9170=m
++CONFIG_B43=m
++CONFIG_B43LEGACY=m
++CONFIG_HOSTAP=m
++CONFIG_IWM=m
++CONFIG_LIBERTAS=m
++CONFIG_LIBERTAS_USB=m
++CONFIG_LIBERTAS_SDIO=m
++CONFIG_P54_COMMON=m
++CONFIG_P54_USB=m
++CONFIG_RT2X00=m
++CONFIG_RT2500USB=m
++CONFIG_RT73USB=m
++CONFIG_RT2800USB=m
++CONFIG_RT2800USB_RT53XX=y
++CONFIG_RTL8192CU=m
++CONFIG_WL1251=m
++CONFIG_WL12XX_MENU=m
++CONFIG_ZD1211RW=m
++CONFIG_MWIFIEX=m
++CONFIG_MWIFIEX_SDIO=m
++CONFIG_WIMAX_I2400M_USB=m
++CONFIG_USB_CATC=m
++CONFIG_USB_KAWETH=m
++CONFIG_USB_PEGASUS=m
++CONFIG_USB_RTL8150=m
++CONFIG_USB_USBNET=y
++CONFIG_USB_NET_AX8817X=m
++CONFIG_USB_NET_CDCETHER=m
++CONFIG_USB_NET_CDC_EEM=m
++CONFIG_USB_NET_DM9601=m
++CONFIG_USB_NET_SMSC75XX=m
++CONFIG_USB_NET_SMSC95XX=y
++CONFIG_USB_NET_GL620A=m
++CONFIG_USB_NET_NET1080=m
++CONFIG_USB_NET_PLUSB=m
++CONFIG_USB_NET_MCS7830=m
++CONFIG_USB_NET_CDC_SUBSET=m
++CONFIG_USB_ALI_M5632=y
++CONFIG_USB_AN2720=y
++CONFIG_USB_KC2190=y
++# CONFIG_USB_NET_ZAURUS is not set
++CONFIG_USB_NET_CX82310_ETH=m
++CONFIG_USB_NET_KALMIA=m
++CONFIG_USB_NET_INT51X1=m
++CONFIG_USB_IPHETH=m
++CONFIG_USB_SIERRA_NET=m
++CONFIG_USB_VL600=m
++CONFIG_PPP=m
++CONFIG_PPP_ASYNC=m
++CONFIG_PPP_SYNC_TTY=m
++CONFIG_PPP_DEFLATE=m
++CONFIG_PPP_BSDCOMP=m
++CONFIG_SLIP=m
++CONFIG_SLIP_COMPRESSED=y
++CONFIG_NETCONSOLE=m
++CONFIG_INPUT_POLLDEV=m
++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_JOYDEV=m
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_INPUT_MISC=y
++CONFIG_INPUT_AD714X=m
++CONFIG_INPUT_ATI_REMOTE=m
++CONFIG_INPUT_ATI_REMOTE2=m
++CONFIG_INPUT_KEYSPAN_REMOTE=m
++CONFIG_INPUT_POWERMATE=m
++CONFIG_INPUT_YEALINK=m
++CONFIG_INPUT_CM109=m
++CONFIG_INPUT_UINPUT=m
++CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
++CONFIG_INPUT_ADXL34X=m
++CONFIG_INPUT_CMA3000=m
++CONFIG_SERIO=m
++CONFIG_SERIO_RAW=m
++CONFIG_GAMEPORT=m
++CONFIG_GAMEPORT_NS558=m
++CONFIG_GAMEPORT_L4=m
++CONFIG_VT_HW_CONSOLE_BINDING=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_AMBA_PL011=y
++CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
++# CONFIG_HW_RANDOM is not set
++CONFIG_RAW_DRIVER=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_BCM2708_WDT=m
++# CONFIG_MFD_SUPPORT is not set
++CONFIG_FB=y
++CONFIG_FB_BCM2708=y
++CONFIG_FRAMEBUFFER_CONSOLE=y
++CONFIG_LOGO=y
++# CONFIG_LOGO_LINUX_MONO is not set
++# CONFIG_LOGO_LINUX_VGA16 is not set
++CONFIG_SOUND=y
++CONFIG_SND=m
++CONFIG_SND_SEQUENCER=m
++CONFIG_SND_SEQ_DUMMY=m
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_SEQUENCER_OSS=y
++CONFIG_SND_HRTIMER=m
++CONFIG_SND_DUMMY=m
++CONFIG_SND_ALOOP=m
++CONFIG_SND_VIRMIDI=m
++CONFIG_SND_MTPAV=m
++CONFIG_SND_SERIAL_U16550=m
++CONFIG_SND_MPU401=m
++CONFIG_SND_BCM2835=m
++CONFIG_SND_USB_AUDIO=m
++CONFIG_SND_USB_UA101=m
++CONFIG_SND_USB_CAIAQ=m
++CONFIG_SND_USB_6FIRE=m
++CONFIG_SOUND_PRIME=m
++CONFIG_HID_PID=y
++CONFIG_USB_HIDDEV=y
++CONFIG_HID_A4TECH=m
++CONFIG_HID_ACRUX=m
++CONFIG_HID_APPLE=m
++CONFIG_HID_BELKIN=m
++CONFIG_HID_CHERRY=m
++CONFIG_HID_CHICONY=m
++CONFIG_HID_CYPRESS=m
++CONFIG_HID_DRAGONRISE=m
++CONFIG_HID_EMS_FF=m
++CONFIG_HID_ELECOM=m
++CONFIG_HID_EZKEY=m
++CONFIG_HID_HOLTEK=m
++CONFIG_HID_KEYTOUCH=m
++CONFIG_HID_KYE=m
++CONFIG_HID_UCLOGIC=m
++CONFIG_HID_WALTOP=m
++CONFIG_HID_GYRATION=m
++CONFIG_HID_TWINHAN=m
++CONFIG_HID_KENSINGTON=m
++CONFIG_HID_LCPOWER=m
++CONFIG_HID_LOGITECH=m
++CONFIG_HID_MAGICMOUSE=m
++CONFIG_HID_MICROSOFT=m
++CONFIG_HID_MONTEREY=m
++CONFIG_HID_MULTITOUCH=m
++CONFIG_HID_NTRIG=m
++CONFIG_HID_ORTEK=m
++CONFIG_HID_PANTHERLORD=m
++CONFIG_HID_PETALYNX=m
++CONFIG_HID_PICOLCD=m
++CONFIG_HID_QUANTA=m
++CONFIG_HID_ROCCAT=m
++CONFIG_HID_SAMSUNG=m
++CONFIG_HID_SONY=m
++CONFIG_HID_SPEEDLINK=m
++CONFIG_HID_SUNPLUS=m
++CONFIG_HID_GREENASIA=m
++CONFIG_HID_SMARTJOYPLUS=m
++CONFIG_HID_TOPSEED=m
++CONFIG_HID_THRUSTMASTER=m
++CONFIG_HID_WACOM=m
++CONFIG_HID_WIIMOTE=m
++CONFIG_HID_ZEROPLUS=m
++CONFIG_HID_ZYDACRON=m
++CONFIG_USB=y
++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
++CONFIG_USB_MON=m
++CONFIG_USB_DWCOTG=y
++CONFIG_USB_STORAGE=y
++CONFIG_USB_STORAGE_REALTEK=m
++CONFIG_USB_STORAGE_DATAFAB=m
++CONFIG_USB_STORAGE_FREECOM=m
++CONFIG_USB_STORAGE_ISD200=m
++CONFIG_USB_STORAGE_USBAT=m
++CONFIG_USB_STORAGE_SDDR09=m
++CONFIG_USB_STORAGE_SDDR55=m
++CONFIG_USB_STORAGE_JUMPSHOT=m
++CONFIG_USB_STORAGE_ALAUDA=m
++CONFIG_USB_STORAGE_ONETOUCH=m
++CONFIG_USB_STORAGE_KARMA=m
++CONFIG_USB_STORAGE_CYPRESS_ATACB=m
++CONFIG_USB_STORAGE_ENE_UB6250=m
++CONFIG_USB_UAS=y
++CONFIG_USB_LIBUSUAL=y
++CONFIG_USB_MDC800=m
++CONFIG_USB_MICROTEK=m
++CONFIG_USB_SERIAL=m
++CONFIG_USB_SERIAL_GENERIC=y
++CONFIG_USB_SERIAL_AIRCABLE=m
++CONFIG_USB_SERIAL_ARK3116=m
++CONFIG_USB_SERIAL_BELKIN=m
++CONFIG_USB_SERIAL_CH341=m
++CONFIG_USB_SERIAL_WHITEHEAT=m
++CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
++CONFIG_USB_SERIAL_CP210X=m
++CONFIG_USB_SERIAL_CYPRESS_M8=m
++CONFIG_USB_SERIAL_EMPEG=m
++CONFIG_USB_SERIAL_FTDI_SIO=m
++CONFIG_USB_SERIAL_FUNSOFT=m
++CONFIG_USB_SERIAL_VISOR=m
++CONFIG_USB_SERIAL_IPAQ=m
++CONFIG_USB_SERIAL_IR=m
++CONFIG_USB_SERIAL_EDGEPORT=m
++CONFIG_USB_SERIAL_EDGEPORT_TI=m
++CONFIG_USB_SERIAL_GARMIN=m
++CONFIG_USB_SERIAL_IPW=m
++CONFIG_USB_SERIAL_IUU=m
++CONFIG_USB_SERIAL_KEYSPAN_PDA=m
++CONFIG_USB_SERIAL_KEYSPAN=m
++CONFIG_USB_SERIAL_KLSI=m
++CONFIG_USB_SERIAL_KOBIL_SCT=m
++CONFIG_USB_SERIAL_MCT_U232=m
++CONFIG_USB_SERIAL_MOS7720=m
++CONFIG_USB_SERIAL_MOS7840=m
++CONFIG_USB_SERIAL_MOTOROLA=m
++CONFIG_USB_SERIAL_NAVMAN=m
++CONFIG_USB_SERIAL_PL2303=m
++CONFIG_USB_SERIAL_OTI6858=m
++CONFIG_USB_SERIAL_QCAUX=m
++CONFIG_USB_SERIAL_QUALCOMM=m
++CONFIG_USB_SERIAL_SPCP8X5=m
++CONFIG_USB_SERIAL_HP4X=m
++CONFIG_USB_SERIAL_SAFE=m
++CONFIG_USB_SERIAL_SIEMENS_MPI=m
++CONFIG_USB_SERIAL_SIERRAWIRELESS=m
++CONFIG_USB_SERIAL_SYMBOL=m
++CONFIG_USB_SERIAL_TI=m
++CONFIG_USB_SERIAL_CYBERJACK=m
++CONFIG_USB_SERIAL_XIRCOM=m
++CONFIG_USB_SERIAL_OPTION=m
++CONFIG_USB_SERIAL_OMNINET=m
++CONFIG_USB_SERIAL_OPTICON=m
++CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
++CONFIG_USB_SERIAL_ZIO=m
++CONFIG_USB_SERIAL_SSU100=m
++CONFIG_USB_SERIAL_DEBUG=m
++CONFIG_USB_EMI62=m
++CONFIG_USB_EMI26=m
++CONFIG_USB_ADUTUX=m
++CONFIG_USB_SEVSEG=m
++CONFIG_USB_RIO500=m
++CONFIG_USB_LEGOTOWER=m
++CONFIG_USB_LCD=m
++CONFIG_USB_LED=m
++CONFIG_USB_CYPRESS_CY7C63=m
++CONFIG_USB_CYTHERM=m
++CONFIG_USB_IDMOUSE=m
++CONFIG_USB_FTDI_ELAN=m
++CONFIG_USB_APPLEDISPLAY=m
++CONFIG_USB_LD=m
++CONFIG_USB_TRANCEVIBRATOR=m
++CONFIG_USB_IOWARRIOR=m
++CONFIG_USB_TEST=m
++CONFIG_USB_ISIGHTFW=m
++CONFIG_USB_YUREX=m
++CONFIG_MMC=y
++CONFIG_MMC_SDHCI=y
++CONFIG_MMC_SDHCI_PLTFM=y
++CONFIG_MMC_SDHCI_BCM2708=y
++CONFIG_MMC_SDHCI_BCM2708_DMA=y
++CONFIG_LEDS_GPIO=y
++CONFIG_LEDS_TRIGGER_TIMER=m
++CONFIG_LEDS_TRIGGER_HEARTBEAT=m
++CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
++CONFIG_UIO=m
++CONFIG_UIO_PDRV=m
++CONFIG_UIO_PDRV_GENIRQ=m
++# CONFIG_IOMMU_SUPPORT is not set
++CONFIG_EXT4_FS=y
++CONFIG_EXT4_FS_POSIX_ACL=y
++CONFIG_EXT4_FS_SECURITY=y
++CONFIG_REISERFS_FS=m
++CONFIG_REISERFS_FS_XATTR=y
++CONFIG_REISERFS_FS_POSIX_ACL=y
++CONFIG_REISERFS_FS_SECURITY=y
++CONFIG_JFS_FS=m
++CONFIG_JFS_POSIX_ACL=y
++CONFIG_JFS_SECURITY=y
++CONFIG_JFS_STATISTICS=y
++CONFIG_XFS_FS=m
++CONFIG_XFS_QUOTA=y
++CONFIG_XFS_POSIX_ACL=y
++CONFIG_XFS_RT=y
++CONFIG_GFS2_FS=m
++CONFIG_OCFS2_FS=m
++CONFIG_BTRFS_FS=m
++CONFIG_BTRFS_FS_POSIX_ACL=y
++CONFIG_NILFS2_FS=m
++CONFIG_FANOTIFY=y
++CONFIG_AUTOFS4_FS=y
++CONFIG_FUSE_FS=m
++CONFIG_CUSE=m
++CONFIG_FSCACHE=y
++CONFIG_FSCACHE_STATS=y
++CONFIG_FSCACHE_HISTOGRAM=y
++CONFIG_CACHEFILES=y
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++CONFIG_ZISOFS=y
++CONFIG_UDF_FS=m
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
++CONFIG_NTFS_FS=m
++CONFIG_TMPFS=y
++CONFIG_TMPFS_POSIX_ACL=y
++CONFIG_CONFIGFS_FS=y
++CONFIG_SQUASHFS=m
++CONFIG_SQUASHFS_XATTR=y
++CONFIG_SQUASHFS_LZO=y
++CONFIG_SQUASHFS_XZ=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++CONFIG_NFS_V3_ACL=y
++CONFIG_NFS_V4=y
++CONFIG_ROOT_NFS=y
++CONFIG_NFS_FSCACHE=y
++CONFIG_CIFS=m
++CONFIG_CIFS_WEAK_PW_HASH=y
++CONFIG_CIFS_XATTR=y
++CONFIG_CIFS_POSIX=y
++CONFIG_9P_FS=m
++CONFIG_9P_FS_POSIX_ACL=y
++CONFIG_PARTITION_ADVANCED=y
++CONFIG_MAC_PARTITION=y
++CONFIG_EFI_PARTITION=y
++CONFIG_NLS_DEFAULT="utf8"
++CONFIG_NLS_CODEPAGE_437=y
++CONFIG_NLS_CODEPAGE_737=m
++CONFIG_NLS_CODEPAGE_775=m
++CONFIG_NLS_CODEPAGE_850=m
++CONFIG_NLS_CODEPAGE_852=m
++CONFIG_NLS_CODEPAGE_855=m
++CONFIG_NLS_CODEPAGE_857=m
++CONFIG_NLS_CODEPAGE_860=m
++CONFIG_NLS_CODEPAGE_861=m
++CONFIG_NLS_CODEPAGE_862=m
++CONFIG_NLS_CODEPAGE_863=m
++CONFIG_NLS_CODEPAGE_864=m
++CONFIG_NLS_CODEPAGE_865=m
++CONFIG_NLS_CODEPAGE_866=m
++CONFIG_NLS_CODEPAGE_869=m
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_CODEPAGE_950=m
++CONFIG_NLS_CODEPAGE_932=m
++CONFIG_NLS_CODEPAGE_949=m
++CONFIG_NLS_CODEPAGE_874=m
++CONFIG_NLS_ISO8859_8=m
++CONFIG_NLS_CODEPAGE_1250=m
++CONFIG_NLS_CODEPAGE_1251=m
++CONFIG_NLS_ASCII=y
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_ISO8859_2=m
++CONFIG_NLS_ISO8859_3=m
++CONFIG_NLS_ISO8859_4=m
++CONFIG_NLS_ISO8859_5=m
++CONFIG_NLS_ISO8859_6=m
++CONFIG_NLS_ISO8859_7=m
++CONFIG_NLS_ISO8859_9=m
++CONFIG_NLS_ISO8859_13=m
++CONFIG_NLS_ISO8859_14=m
++CONFIG_NLS_ISO8859_15=m
++CONFIG_NLS_KOI8_R=m
++CONFIG_NLS_KOI8_U=m
++CONFIG_NLS_UTF8=m
++CONFIG_PRINTK_TIME=y
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_TIMER_STATS=y
++CONFIG_DEBUG_STACK_USAGE=y
++CONFIG_DEBUG_INFO=y
++CONFIG_DEBUG_MEMORY_INIT=y
++CONFIG_BOOT_PRINTK_DELAY=y
++CONFIG_LATENCYTOP=y
++CONFIG_SYSCTL_SYSCALL_CHECK=y
++CONFIG_IRQSOFF_TRACER=y
++CONFIG_SCHED_TRACER=y
++CONFIG_STACK_TRACER=y
++CONFIG_BLK_DEV_IO_TRACE=y
++CONFIG_FUNCTION_PROFILER=y
++CONFIG_KGDB=y
++CONFIG_KGDB_KDB=y
++CONFIG_KDB_KEYBOARD=y
++CONFIG_STRICT_DEVMEM=y
++CONFIG_CRYPTO_AUTHENC=m
++CONFIG_CRYPTO_SEQIV=m
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_HMAC=y
++CONFIG_CRYPTO_XCBC=m
++CONFIG_CRYPTO_MD5=y
++CONFIG_CRYPTO_SHA1=y
++CONFIG_CRYPTO_SHA256=m
++CONFIG_CRYPTO_SHA512=m
++CONFIG_CRYPTO_TGR192=m
++CONFIG_CRYPTO_WP512=m
++CONFIG_CRYPTO_CAST5=m
++CONFIG_CRYPTO_DES=y
++CONFIG_CRYPTO_DEFLATE=m
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++# CONFIG_CRYPTO_HW is not set
++CONFIG_CRC_ITU_T=y
++CONFIG_LIBCRC32C=y
+diff -Nur linux-3.12.6/arch/arm/configs/bcmrpi_quick_defconfig linux-raspberry-pi/arch/arm/configs/bcmrpi_quick_defconfig
+--- linux-3.12.6/arch/arm/configs/bcmrpi_quick_defconfig	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/configs/bcmrpi_quick_defconfig	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,197 @@
++# CONFIG_ARM_PATCH_PHYS_VIRT is not set
++CONFIG_LOCALVERSION="-quick"
++# CONFIG_LOCALVERSION_AUTO is not set
++# CONFIG_SWAP is not set
++CONFIG_SYSVIPC=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_KALLSYMS_ALL=y
++CONFIG_EMBEDDED=y
++CONFIG_PERF_EVENTS=y
++# CONFIG_COMPAT_BRK is not set
++CONFIG_SLAB=y
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODVERSIONS=y
++CONFIG_MODULE_SRCVERSION_ALL=y
++# CONFIG_BLK_DEV_BSG is not set
++CONFIG_ARCH_BCM2708=y
++CONFIG_PREEMPT=y
++CONFIG_AEABI=y
++CONFIG_UACCESS_WITH_MEMCPY=y
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait"
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
++CONFIG_CPU_IDLE=y
++CONFIG_VFP=y
++CONFIG_BINFMT_MISC=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_RARP=y
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_WIRELESS is not set
++CONFIG_DEVTMPFS=y
++CONFIG_DEVTMPFS_MOUNT=y
++CONFIG_BLK_DEV_LOOP=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_SCSI=y
++# CONFIG_SCSI_PROC_FS is not set
++# CONFIG_SCSI_LOWLEVEL is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NET_VENDOR_BROADCOM is not set
++# CONFIG_NET_VENDOR_CIRRUS is not set
++# CONFIG_NET_VENDOR_FARADAY is not set
++# CONFIG_NET_VENDOR_INTEL is not set
++# CONFIG_NET_VENDOR_MARVELL is not set
++# CONFIG_NET_VENDOR_MICREL is not set
++# CONFIG_NET_VENDOR_NATSEMI is not set
++# CONFIG_NET_VENDOR_SEEQ is not set
++# CONFIG_NET_VENDOR_STMICRO is not set
++# CONFIG_NET_VENDOR_WIZNET is not set
++CONFIG_USB_USBNET=y
++# CONFIG_USB_NET_AX8817X is not set
++# CONFIG_USB_NET_CDCETHER is not set
++# CONFIG_USB_NET_CDC_NCM is not set
++CONFIG_USB_NET_SMSC95XX=y
++# CONFIG_USB_NET_NET1080 is not set
++# CONFIG_USB_NET_CDC_SUBSET is not set
++# CONFIG_USB_NET_ZAURUS is not set
++# CONFIG_WLAN is not set
++# CONFIG_INPUT_MOUSEDEV is not set
++CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_SERIO is not set
++CONFIG_VT_HW_CONSOLE_BINDING=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_AMBA_PL011=y
++CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
++CONFIG_TTY_PRINTK=y
++CONFIG_HW_RANDOM=y
++CONFIG_HW_RANDOM_BCM2708=y
++CONFIG_RAW_DRIVER=y
++CONFIG_THERMAL=y
++CONFIG_THERMAL_BCM2835=y
++CONFIG_WATCHDOG=y
++CONFIG_BCM2708_WDT=y
++CONFIG_REGULATOR=y
++CONFIG_REGULATOR_DEBUG=y
++CONFIG_REGULATOR_FIXED_VOLTAGE=y
++CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
++CONFIG_REGULATOR_USERSPACE_CONSUMER=y
++CONFIG_FB=y
++CONFIG_FB_BCM2708=y
++CONFIG_FRAMEBUFFER_CONSOLE=y
++CONFIG_LOGO=y
++# CONFIG_LOGO_LINUX_MONO is not set
++# CONFIG_LOGO_LINUX_VGA16 is not set
++CONFIG_SOUND=y
++CONFIG_SND=y
++CONFIG_SND_BCM2835=y
++# CONFIG_SND_USB is not set
++CONFIG_USB=y
++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
++CONFIG_USB_DWCOTG=y
++CONFIG_MMC=y
++CONFIG_MMC_SDHCI=y
++CONFIG_MMC_SDHCI_PLTFM=y
++CONFIG_MMC_SDHCI_BCM2708=y
++CONFIG_MMC_SDHCI_BCM2708_DMA=y
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++CONFIG_LEDS_TRIGGERS=y
++# CONFIG_IOMMU_SUPPORT is not set
++CONFIG_EXT4_FS=y
++CONFIG_EXT4_FS_POSIX_ACL=y
++CONFIG_EXT4_FS_SECURITY=y
++CONFIG_AUTOFS4_FS=y
++CONFIG_FSCACHE=y
++CONFIG_CACHEFILES=y
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
++CONFIG_TMPFS=y
++CONFIG_TMPFS_POSIX_ACL=y
++CONFIG_CONFIGFS_FS=y
++# CONFIG_MISC_FILESYSTEMS is not set
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3_ACL=y
++CONFIG_NFS_V4=y
++CONFIG_ROOT_NFS=y
++CONFIG_NFS_FSCACHE=y
++CONFIG_NLS_DEFAULT="utf8"
++CONFIG_NLS_CODEPAGE_437=y
++CONFIG_NLS_CODEPAGE_737=y
++CONFIG_NLS_CODEPAGE_775=y
++CONFIG_NLS_CODEPAGE_850=y
++CONFIG_NLS_CODEPAGE_852=y
++CONFIG_NLS_CODEPAGE_855=y
++CONFIG_NLS_CODEPAGE_857=y
++CONFIG_NLS_CODEPAGE_860=y
++CONFIG_NLS_CODEPAGE_861=y
++CONFIG_NLS_CODEPAGE_862=y
++CONFIG_NLS_CODEPAGE_863=y
++CONFIG_NLS_CODEPAGE_864=y
++CONFIG_NLS_CODEPAGE_865=y
++CONFIG_NLS_CODEPAGE_866=y
++CONFIG_NLS_CODEPAGE_869=y
++CONFIG_NLS_CODEPAGE_936=y
++CONFIG_NLS_CODEPAGE_950=y
++CONFIG_NLS_CODEPAGE_932=y
++CONFIG_NLS_CODEPAGE_949=y
++CONFIG_NLS_CODEPAGE_874=y
++CONFIG_NLS_ISO8859_8=y
++CONFIG_NLS_CODEPAGE_1250=y
++CONFIG_NLS_CODEPAGE_1251=y
++CONFIG_NLS_ASCII=y
++CONFIG_NLS_ISO8859_1=y
++CONFIG_NLS_ISO8859_2=y
++CONFIG_NLS_ISO8859_3=y
++CONFIG_NLS_ISO8859_4=y
++CONFIG_NLS_ISO8859_5=y
++CONFIG_NLS_ISO8859_6=y
++CONFIG_NLS_ISO8859_7=y
++CONFIG_NLS_ISO8859_9=y
++CONFIG_NLS_ISO8859_13=y
++CONFIG_NLS_ISO8859_14=y
++CONFIG_NLS_ISO8859_15=y
++CONFIG_NLS_UTF8=y
++CONFIG_PRINTK_TIME=y
++CONFIG_DEBUG_FS=y
++CONFIG_DETECT_HUNG_TASK=y
++# CONFIG_DEBUG_PREEMPT is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_FTRACE is not set
++CONFIG_KGDB=y
++CONFIG_KGDB_KDB=y
++# CONFIG_ARM_UNWIND is not set
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_HMAC=y
++CONFIG_CRYPTO_MD5=y
++CONFIG_CRYPTO_SHA1=y
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++# CONFIG_CRYPTO_HW is not set
++CONFIG_CRC_ITU_T=y
++CONFIG_LIBCRC32C=y
+diff -Nur linux-3.12.6/arch/arm/include/asm/fiq.h linux-raspberry-pi/arch/arm/include/asm/fiq.h
+--- linux-3.12.6/arch/arm/include/asm/fiq.h	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/arch/arm/include/asm/fiq.h	2013-12-29 10:40:21.000000000 +0100
+@@ -42,6 +42,7 @@
+ /* helpers defined in fiqasm.S: */
+ extern void __set_fiq_regs(unsigned long const *regs);
+ extern void __get_fiq_regs(unsigned long *regs);
++extern void __FIQ_Branch(unsigned long *regs);
+ 
+ static inline void set_fiq_regs(struct pt_regs const *regs)
+ {
+diff -Nur linux-3.12.6/arch/arm/Kconfig linux-raspberry-pi/arch/arm/Kconfig
+--- linux-3.12.6/arch/arm/Kconfig	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/arch/arm/Kconfig	2013-12-29 10:40:20.000000000 +0100
+@@ -368,6 +368,24 @@
+ 	  This enables support for systems based on Atmel
+ 	  AT91RM9200 and AT91SAM9* processors.
+ 
++config ARCH_BCM2708
++	bool "Broadcom BCM2708 family"
++	select CPU_V6
++	select ARM_AMBA
++	select HAVE_CLK
++	select HAVE_SCHED_CLOCK
++	select NEED_MACH_GPIO_H
++	select NEED_MACH_MEMORY_H
++	select CLKDEV_LOOKUP
++	select ARCH_HAS_CPUFREQ
++	select GENERIC_CLOCKEVENTS
++	select ARM_ERRATA_411920
++	select MACH_BCM2708
++	select VC4
++	select FIQ
++	help
++	  This enables support for Broadcom BCM2708 boards.
++
+ config ARCH_CLPS711X
+ 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
+ 	select ARCH_REQUIRE_GPIOLIB
+@@ -1043,6 +1061,7 @@
+ source "arch/arm/mach-vt8500/Kconfig"
+ 
+ source "arch/arm/mach-w90x900/Kconfig"
++source "arch/arm/mach-bcm2708/Kconfig"
+ 
+ source "arch/arm/mach-zynq/Kconfig"
+ 
+diff -Nur linux-3.12.6/arch/arm/Kconfig.debug linux-raspberry-pi/arch/arm/Kconfig.debug
+--- linux-3.12.6/arch/arm/Kconfig.debug	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/arch/arm/Kconfig.debug	2013-12-29 10:40:20.000000000 +0100
+@@ -847,6 +847,14 @@
+ 		  options; the platform specific options are deprecated
+ 		  and will be soon removed.
+ 
++	config DEBUG_BCM2708_UART0
++		bool "Broadcom BCM2708 UART0 (PL011)"
++		depends on MACH_BCM2708
++		help
++		  Say Y here if you want the debug print routines to direct
++		  their output to UART 0. The port must have been initialised
++		  by the boot-loader before use.
++
+ endchoice
+ 
+ config DEBUG_EXYNOS_UART
+diff -Nur linux-3.12.6/arch/arm/kernel/fiqasm.S linux-raspberry-pi/arch/arm/kernel/fiqasm.S
+--- linux-3.12.6/arch/arm/kernel/fiqasm.S	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/arch/arm/kernel/fiqasm.S	2013-12-29 10:40:21.000000000 +0100
+@@ -25,6 +25,9 @@
+ ENTRY(__set_fiq_regs)
+ 	mov	r2, #PSR_I_BIT | PSR_F_BIT | FIQ_MODE
+ 	mrs	r1, cpsr
++@@@@@@@@@@@@@@@ hack: enable the fiq here to keep usb driver happy
++	and	r1, #~PSR_F_BIT
++@@@@@@@@@@@@@@@ endhack: (need to find better place for this to happen)
+ 	msr	cpsr_c, r2	@ select FIQ mode
+ 	mov	r0, r0		@ avoid hazard prior to ARMv4
+ 	ldmia	r0!, {r8 - r12}
+@@ -47,3 +50,7 @@
+ 	mov	r0, r0		@ avoid hazard prior to ARMv4
+ 	mov	pc, lr
+ ENDPROC(__get_fiq_regs)
++
++ENTRY(__FIQ_Branch)
++	mov pc, r8
++ENDPROC(__FIQ_Branch)
+diff -Nur linux-3.12.6/arch/arm/kernel/fiq.c linux-raspberry-pi/arch/arm/kernel/fiq.c
+--- linux-3.12.6/arch/arm/kernel/fiq.c	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/arch/arm/kernel/fiq.c	2013-12-29 10:40:21.000000000 +0100
+@@ -142,6 +142,7 @@
+ EXPORT_SYMBOL(set_fiq_handler);
+ EXPORT_SYMBOL(__set_fiq_regs);	/* defined in fiqasm.S */
+ EXPORT_SYMBOL(__get_fiq_regs);	/* defined in fiqasm.S */
++EXPORT_SYMBOL(__FIQ_Branch);	/* defined in fiqasm.S */
+ EXPORT_SYMBOL(claim_fiq);
+ EXPORT_SYMBOL(release_fiq);
+ EXPORT_SYMBOL(enable_fiq);
+diff -Nur linux-3.12.6/arch/arm/kernel/process.c linux-raspberry-pi/arch/arm/kernel/process.c
+--- linux-3.12.6/arch/arm/kernel/process.c	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/arch/arm/kernel/process.c	2013-12-29 10:40:21.000000000 +0100
+@@ -176,6 +176,16 @@
+ 		default_idle();
+ }
+ 
++char bcm2708_reboot_mode = 'h';
++
++int __init reboot_setup(char *str)
++{
++	bcm2708_reboot_mode = str[0];
++	return 1;
++}
++
++__setup("reboot=", reboot_setup);
++
+ /*
+  * Called by kexec, immediately prior to machine_kexec().
+  *
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/armctrl.c linux-raspberry-pi/arch/arm/mach-bcm2708/armctrl.c
+--- linux-3.12.6/arch/arm/mach-bcm2708/armctrl.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/armctrl.c	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,219 @@
++/*
++ *  linux/arch/arm/mach-bcm2708/armctrl.c
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++#include <linux/init.h>
++#include <linux/list.h>
++#include <linux/io.h>
++#include <linux/version.h>
++#include <linux/syscore_ops.h>
++#include <linux/interrupt.h>
++
++#include <asm/mach/irq.h>
++#include <mach/hardware.h>
++#include "armctrl.h"
++
++/* For support of kernels >= 3.0 assume only one VIC for now*/
++static unsigned int remap_irqs[(INTERRUPT_ARASANSDIO + 1) - INTERRUPT_JPEG] = {
++	INTERRUPT_VC_JPEG,
++	INTERRUPT_VC_USB,
++	INTERRUPT_VC_3D,
++	INTERRUPT_VC_DMA2,
++	INTERRUPT_VC_DMA3,
++	INTERRUPT_VC_I2C,
++	INTERRUPT_VC_SPI,
++	INTERRUPT_VC_I2SPCM,
++	INTERRUPT_VC_SDIO,
++	INTERRUPT_VC_UART,
++	INTERRUPT_VC_ARASANSDIO
++};
++
++static void armctrl_mask_irq(struct irq_data *d)
++{
++	static const unsigned int disables[4] = {
++		ARM_IRQ_DIBL1,
++		ARM_IRQ_DIBL2,
++		ARM_IRQ_DIBL3,
++		0
++	};
++
++	if (d->irq >= FIQ_START) {
++		writel(0, __io_address(ARM_IRQ_FAST));
++	} else {
++		unsigned int data = (unsigned int)irq_get_chip_data(d->irq);
++		writel(1 << (data & 0x1f), __io_address(disables[(data >> 5) & 0x3]));
++	}
++}
++
++static void armctrl_unmask_irq(struct irq_data *d)
++{
++	static const unsigned int enables[4] = {
++		ARM_IRQ_ENBL1,
++		ARM_IRQ_ENBL2,
++		ARM_IRQ_ENBL3,
++		0
++	};
++
++	if (d->irq >= FIQ_START) {
++		unsigned int data =
++		    (unsigned int)irq_get_chip_data(d->irq) - FIQ_START;
++		writel(0x80 | data, __io_address(ARM_IRQ_FAST));
++	} else {
++		unsigned int data = (unsigned int)irq_get_chip_data(d->irq);
++		writel(1 << (data & 0x1f), __io_address(enables[(data >> 5) & 0x3]));
++	}
++}
++
++#if defined(CONFIG_PM)
++
++/* for kernels 3.xx use the new syscore_ops apis but for older kernels use the sys dev class */
++
++/* Static defines
++ * struct armctrl_device - VIC PM device (< 3.xx)
++ * @sysdev: The system device which is registered. (< 3.xx)
++ * @irq: The IRQ number for the base of the VIC.
++ * @base: The register base for the VIC.
++ * @resume_sources: A bitmask of interrupts for resume.
++ * @resume_irqs: The IRQs enabled for resume.
++ * @int_select: Save for VIC_INT_SELECT.
++ * @int_enable: Save for VIC_INT_ENABLE.
++ * @soft_int: Save for VIC_INT_SOFT.
++ * @protect: Save for VIC_PROTECT.
++ */
++struct armctrl_info {
++	void __iomem *base;
++	int irq;
++	u32 resume_sources;
++	u32 resume_irqs;
++	u32 int_select;
++	u32 int_enable;
++	u32 soft_int;
++	u32 protect;
++} armctrl;
++
++static int armctrl_suspend(void)
++{
++	return 0;
++}
++
++static void armctrl_resume(void)
++{
++	return;
++}
++
++/**
++ * armctrl_pm_register - Register a VIC for later power management control
++ * @base: The base address of the VIC.
++ * @irq: The base IRQ for the VIC.
++ * @resume_sources: bitmask of interrupts allowed for resume sources.
++ *
++ * For older kernels (< 3.xx) do -
++ * Register the VIC with the system device tree so that it can be notified
++ * of suspend and resume requests and ensure that the correct actions are
++ * taken to re-instate the settings on resume.
++ */
++static void __init armctrl_pm_register(void __iomem * base, unsigned int irq,
++				       u32 resume_sources)
++{
++	armctrl.base = base;
++	armctrl.resume_sources = resume_sources;
++	armctrl.irq = irq;
++}
++
++static int armctrl_set_wake(struct irq_data *d, unsigned int on)
++{
++	unsigned int off = d->irq & 31;
++	u32 bit = 1 << off;
++
++	if (!(bit & armctrl.resume_sources))
++		return -EINVAL;
++
++	if (on)
++		armctrl.resume_irqs |= bit;
++	else
++		armctrl.resume_irqs &= ~bit;
++
++	return 0;
++}
++
++#else
++static inline void armctrl_pm_register(void __iomem * base, unsigned int irq,
++				       u32 arg1)
++{
++}
++
++#define armctrl_suspend NULL
++#define armctrl_resume NULL
++#define armctrl_set_wake NULL
++#endif /* CONFIG_PM */
++
++static struct syscore_ops armctrl_syscore_ops = {
++	.suspend = armctrl_suspend,
++	.resume = armctrl_resume,
++};
++
++/**
++ * armctrl_syscore_init - initicall to register VIC pm functions
++ *
++ * This is called via late_initcall() to register
++ * the resources for the VICs due to the early
++ * nature of the VIC's registration.
++*/
++static int __init armctrl_syscore_init(void)
++{
++	register_syscore_ops(&armctrl_syscore_ops);
++	return 0;
++}
++
++late_initcall(armctrl_syscore_init);
++
++static struct irq_chip armctrl_chip = {
++	.name = "ARMCTRL",
++	.irq_ack = armctrl_mask_irq,
++	.irq_mask = armctrl_mask_irq,
++	.irq_unmask = armctrl_unmask_irq,
++	.irq_set_wake = armctrl_set_wake,
++};
++
++/**
++ * armctrl_init - initialise a vectored interrupt controller
++ * @base: iomem base address
++ * @irq_start: starting interrupt number, must be muliple of 32
++ * @armctrl_sources: bitmask of interrupt sources to allow
++ * @resume_sources: bitmask of interrupt sources to allow for resume
++ */
++int __init armctrl_init(void __iomem * base, unsigned int irq_start,
++			u32 armctrl_sources, u32 resume_sources)
++{
++	unsigned int irq;
++
++	for (irq = 0; irq < NR_IRQS; irq++) {
++		unsigned int data = irq;
++		if (irq >= INTERRUPT_JPEG && irq <= INTERRUPT_ARASANSDIO)
++			data = remap_irqs[irq - INTERRUPT_JPEG];
++
++		irq_set_chip(irq, &armctrl_chip);
++		irq_set_chip_data(irq, (void *)data);
++		irq_set_handler(irq, handle_level_irq);
++		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_DISABLED);
++	}
++
++	armctrl_pm_register(base, irq_start, resume_sources);
++	init_FIQ(FIQ_START);
++	return 0;
++}
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/armctrl.h linux-raspberry-pi/arch/arm/mach-bcm2708/armctrl.h
+--- linux-3.12.6/arch/arm/mach-bcm2708/armctrl.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/armctrl.h	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,27 @@
++/*
++ *  linux/arch/arm/mach-bcm2708/armctrl.h
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#ifndef __BCM2708_ARMCTRL_H
++#define __BCM2708_ARMCTRL_H
++
++extern int __init armctrl_init(void __iomem * base, unsigned int irq_start,
++			       u32 armctrl_sources, u32 resume_sources);
++
++#endif
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/bcm2708.c linux-raspberry-pi/arch/arm/mach-bcm2708/bcm2708.c
+--- linux-3.12.6/arch/arm/mach-bcm2708/bcm2708.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/bcm2708.c	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,985 @@
++/*
++ *  linux/arch/arm/mach-bcm2708/bcm2708.c
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/serial_8250.h>
++#include <linux/platform_device.h>
++#include <linux/syscore_ops.h>
++#include <linux/interrupt.h>
++#include <linux/amba/bus.h>
++#include <linux/amba/clcd.h>
++#include <linux/clockchips.h>
++#include <linux/cnt32_to_63.h>
++#include <linux/io.h>
++#include <linux/module.h>
++#include <linux/spi/spi.h>
++#include <linux/w1-gpio.h>
++
++#include <linux/version.h>
++#include <linux/clkdev.h>
++#include <asm/system.h>
++#include <mach/hardware.h>
++#include <asm/irq.h>
++#include <linux/leds.h>
++#include <asm/mach-types.h>
++#include <asm/sched_clock.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++#include <asm/mach/irq.h>
++#include <asm/mach/time.h>
++#include <asm/mach/map.h>
++
++#include <mach/timex.h>
++#include <mach/dma.h>
++#include <mach/vcio.h>
++#include <mach/system.h>
++
++#include <linux/delay.h>
++
++#include "bcm2708.h"
++#include "armctrl.h"
++#include "clock.h"
++
++#ifdef CONFIG_BCM_VC_CMA
++#include <linux/broadcom/vc_cma.h>
++#endif
++
++
++/* Effectively we have an IOMMU (ARM<->VideoCore map) that is set up to
++ * give us IO access only to 64Mbytes of physical memory (26 bits).  We could
++ * represent this window by setting our dmamasks to 26 bits but, in fact
++ * we're not going to use addresses outside this range (they're not in real
++ * memory) so we don't bother.
++ *
++ * In the future we might include code to use this IOMMU to remap other
++ * physical addresses onto VideoCore memory then the use of 32-bits would be
++ * more legitimate.
++ */
++#define DMA_MASK_BITS_COMMON 32
++
++// use GPIO 4 for the one-wire GPIO pin, if enabled
++#define W1_GPIO 4
++
++/* command line parameters */
++static unsigned boardrev, serial;
++static unsigned uart_clock;
++static unsigned reboot_part = 0;
++
++static void __init bcm2708_init_led(void);
++
++void __init bcm2708_init_irq(void)
++{
++	armctrl_init(__io_address(ARMCTRL_IC_BASE), 0, 0, 0);
++}
++
++static struct map_desc bcm2708_io_desc[] __initdata = {
++	{
++	 .virtual = IO_ADDRESS(ARMCTRL_BASE),
++	 .pfn = __phys_to_pfn(ARMCTRL_BASE),
++	 .length = SZ_4K,
++	 .type = MT_DEVICE},
++	{
++	 .virtual = IO_ADDRESS(UART0_BASE),
++	 .pfn = __phys_to_pfn(UART0_BASE),
++	 .length = SZ_4K,
++	 .type = MT_DEVICE},
++	{
++	 .virtual = IO_ADDRESS(UART1_BASE),
++	 .pfn = __phys_to_pfn(UART1_BASE),
++	 .length = SZ_4K,
++	 .type = MT_DEVICE},
++	{
++	 .virtual = IO_ADDRESS(DMA_BASE),
++	 .pfn = __phys_to_pfn(DMA_BASE),
++	 .length = SZ_4K,
++	 .type = MT_DEVICE},
++	{
++	 .virtual = IO_ADDRESS(MCORE_BASE),
++	 .pfn = __phys_to_pfn(MCORE_BASE),
++	 .length = SZ_4K,
++	 .type = MT_DEVICE},
++	{
++	 .virtual = IO_ADDRESS(ST_BASE),
++	 .pfn = __phys_to_pfn(ST_BASE),
++	 .length = SZ_4K,
++	 .type = MT_DEVICE},
++	{
++	 .virtual = IO_ADDRESS(USB_BASE),
++	 .pfn = __phys_to_pfn(USB_BASE),
++	 .length = SZ_128K,
++	 .type = MT_DEVICE},
++	{
++	 .virtual = IO_ADDRESS(PM_BASE),
++	 .pfn = __phys_to_pfn(PM_BASE),
++	 .length = SZ_4K,
++	 .type = MT_DEVICE},
++	{
++	 .virtual = IO_ADDRESS(GPIO_BASE),
++	 .pfn = __phys_to_pfn(GPIO_BASE),
++	 .length = SZ_4K,
++	 .type = MT_DEVICE}
++};
++
++void __init bcm2708_map_io(void)
++{
++	iotable_init(bcm2708_io_desc, ARRAY_SIZE(bcm2708_io_desc));
++}
++
++/* The STC is a free running counter that increments at the rate of 1MHz */
++#define STC_FREQ_HZ 1000000
++
++static inline uint32_t timer_read(void)
++{
++	/* STC: a free running counter that increments at the rate of 1MHz */
++	return readl(__io_address(ST_BASE + 0x04));
++}
++
++static unsigned long bcm2708_read_current_timer(void)
++{
++	return timer_read();
++}
++
++static u32 notrace bcm2708_read_sched_clock(void)
++{
++	return timer_read();
++}
++
++static cycle_t clksrc_read(struct clocksource *cs)
++{
++	return timer_read();
++}
++
++static struct clocksource clocksource_stc = {
++	.name = "stc",
++	.rating = 300,
++	.read = clksrc_read,
++	.mask = CLOCKSOURCE_MASK(32),
++	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
++};
++
++unsigned long frc_clock_ticks32(void)
++{
++	return timer_read();
++}
++
++static void __init bcm2708_clocksource_init(void)
++{
++	if (clocksource_register_hz(&clocksource_stc, STC_FREQ_HZ)) {
++		printk(KERN_ERR "timer: failed to initialize clock "
++		       "source %s\n", clocksource_stc.name);
++	}
++}
++
++
++/*
++ * These are fixed clocks.
++ */
++static struct clk ref24_clk = {
++	.rate = UART0_CLOCK,	/* The UART is clocked at 3MHz via APB_CLK */
++};
++
++static struct clk osc_clk = {
++#ifdef CONFIG_ARCH_BCM2708_CHIPIT
++	.rate = 27000000,
++#else
++	.rate = 500000000,	/* ARM clock is set from the VideoCore booter */
++#endif
++};
++
++/* warning - the USB needs a clock > 34MHz */
++
++static struct clk sdhost_clk = {
++#ifdef CONFIG_ARCH_BCM2708_CHIPIT
++	.rate = 4000000,	/* 4MHz */
++#else
++	.rate = 250000000,	/* 250MHz */
++#endif
++};
++
++static struct clk_lookup lookups[] = {
++	{			/* UART0 */
++	 .dev_id = "dev:f1",
++	 .clk = &ref24_clk,
++	 },
++	{			/* USB */
++	 .dev_id = "bcm2708_usb",
++	 .clk = &osc_clk,
++	 }, {	/* SPI */
++		 .dev_id = "bcm2708_spi.0",
++		 .clk = &sdhost_clk,
++	 }, {	/* BSC0 */
++		 .dev_id = "bcm2708_i2c.0",
++		 .clk = &sdhost_clk,
++	 }, {	/* BSC1 */
++		 .dev_id = "bcm2708_i2c.1",
++		 .clk = &sdhost_clk,
++	 }
++};
++
++#define UART0_IRQ	{ IRQ_UART, 0 /*NO_IRQ*/ }
++#define UART0_DMA	{ 15, 14 }
++
++AMBA_DEVICE(uart0, "dev:f1", UART0, NULL);
++
++static struct amba_device *amba_devs[] __initdata = {
++	&uart0_device,
++};
++
++static struct resource bcm2708_dmaman_resources[] = {
++	{
++	 .start = DMA_BASE,
++	 .end = DMA_BASE + SZ_4K - 1,
++	 .flags = IORESOURCE_MEM,
++	 }
++};
++
++static struct platform_device bcm2708_dmaman_device = {
++	.name = BCM_DMAMAN_DRIVER_NAME,
++	.id = 0,		/* first bcm2708_dma */
++	.resource = bcm2708_dmaman_resources,
++	.num_resources = ARRAY_SIZE(bcm2708_dmaman_resources),
++};
++
++#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE)
++static struct w1_gpio_platform_data w1_gpio_pdata = {
++	.pin = W1_GPIO,
++	.is_open_drain = 0,
++};
++
++static struct platform_device w1_device = {
++	.name = "w1-gpio",
++	.id = -1,
++	.dev.platform_data = &w1_gpio_pdata,
++};
++#endif
++
++static u64 fb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
++
++static struct platform_device bcm2708_fb_device = {
++	.name = "bcm2708_fb",
++	.id = -1,		/* only one bcm2708_fb */
++	.resource = NULL,
++	.num_resources = 0,
++	.dev = {
++		.dma_mask = &fb_dmamask,
++		.coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON),
++		},
++};
++
++static struct plat_serial8250_port bcm2708_uart1_platform_data[] = {
++	{
++	 .mapbase = UART1_BASE + 0x40,
++	 .irq = IRQ_AUX,
++	 .uartclk = 125000000,
++	 .regshift = 2,
++	 .iotype = UPIO_MEM,
++	 .flags = UPF_FIXED_TYPE | UPF_IOREMAP | UPF_SKIP_TEST,
++	 .type = PORT_8250,
++	 },
++	{},
++};
++
++static struct platform_device bcm2708_uart1_device = {
++	.name = "serial8250",
++	.id = PLAT8250_DEV_PLATFORM,
++	.dev = {
++		.platform_data = bcm2708_uart1_platform_data,
++		},
++};
++
++static struct resource bcm2708_usb_resources[] = {
++	[0] = {
++	       .start = USB_BASE,
++	       .end = USB_BASE + SZ_128K - 1,
++	       .flags = IORESOURCE_MEM,
++	       },
++	[1] = {
++		.start = MPHI_BASE,
++		.end = MPHI_BASE + SZ_4K - 1,
++		.flags = IORESOURCE_MEM,
++	      },
++	[2] = {
++	       .start = IRQ_HOSTPORT,
++	       .end = IRQ_HOSTPORT,
++	       .flags = IORESOURCE_IRQ,
++	       },
++};
++
++bool fiq_fix_enable = true;
++
++static struct resource bcm2708_usb_resources_no_fiq_fix[] = {
++	[0] = {
++		.start = USB_BASE,
++		.end = USB_BASE + SZ_128K - 1,
++		.flags = IORESOURCE_MEM,
++		},
++	[1] = {
++		.start = IRQ_USB,
++		.end = IRQ_USB,
++		.flags = IORESOURCE_IRQ,
++		},
++};
++
++static u64 usb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
++
++static struct platform_device bcm2708_usb_device = {
++	.name = "bcm2708_usb",
++	.id = -1,		/* only one bcm2708_usb */
++	.resource = bcm2708_usb_resources,
++	.num_resources = ARRAY_SIZE(bcm2708_usb_resources),
++	.dev = {
++		.dma_mask = &usb_dmamask,
++		.coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON),
++		},
++};
++
++static struct resource bcm2708_vcio_resources[] = {
++	[0] = {			/* mailbox/semaphore/doorbell access */
++	       .start = MCORE_BASE,
++	       .end = MCORE_BASE + SZ_4K - 1,
++	       .flags = IORESOURCE_MEM,
++	       },
++};
++
++static u64 vcio_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
++
++static struct platform_device bcm2708_vcio_device = {
++	.name = BCM_VCIO_DRIVER_NAME,
++	.id = -1,		/* only one VideoCore I/O area */
++	.resource = bcm2708_vcio_resources,
++	.num_resources = ARRAY_SIZE(bcm2708_vcio_resources),
++	.dev = {
++		.dma_mask = &vcio_dmamask,
++		.coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON),
++		},
++};
++
++#ifdef CONFIG_BCM2708_GPIO
++#define BCM_GPIO_DRIVER_NAME "bcm2708_gpio"
++
++static struct resource bcm2708_gpio_resources[] = {
++	[0] = {			/* general purpose I/O */
++	       .start = GPIO_BASE,
++	       .end = GPIO_BASE + SZ_4K - 1,
++	       .flags = IORESOURCE_MEM,
++	       },
++};
++
++static u64 gpio_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
++
++static struct platform_device bcm2708_gpio_device = {
++	.name = BCM_GPIO_DRIVER_NAME,
++	.id = -1,		/* only one VideoCore I/O area */
++	.resource = bcm2708_gpio_resources,
++	.num_resources = ARRAY_SIZE(bcm2708_gpio_resources),
++	.dev = {
++		.dma_mask = &gpio_dmamask,
++		.coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON),
++		},
++};
++#endif
++
++static struct resource bcm2708_systemtimer_resources[] = {
++	[0] = {			/* system timer access */
++	       .start = ST_BASE,
++	       .end = ST_BASE + SZ_4K - 1,
++	       .flags = IORESOURCE_MEM,
++	       },
++	{
++	 .start = IRQ_TIMER3,
++	 .end = IRQ_TIMER3,
++	 .flags = IORESOURCE_IRQ,
++	 }
++
++};
++
++static u64 systemtimer_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
++
++static struct platform_device bcm2708_systemtimer_device = {
++	.name = "bcm2708_systemtimer",
++	.id = -1,		/* only one VideoCore I/O area */
++	.resource = bcm2708_systemtimer_resources,
++	.num_resources = ARRAY_SIZE(bcm2708_systemtimer_resources),
++	.dev = {
++		.dma_mask = &systemtimer_dmamask,
++		.coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON),
++		},
++};
++
++#ifdef CONFIG_MMC_SDHCI_BCM2708	/* Arasan emmc SD */
++static struct resource bcm2708_emmc_resources[] = {
++	[0] = {
++	       .start = EMMC_BASE,
++	       .end = EMMC_BASE + SZ_256 - 1,	/* we only need this area */
++	       /* the memory map actually makes SZ_4K available  */
++	       .flags = IORESOURCE_MEM,
++	       },
++	[1] = {
++	       .start = IRQ_ARASANSDIO,
++	       .end = IRQ_ARASANSDIO,
++	       .flags = IORESOURCE_IRQ,
++	       },
++};
++
++static u64 bcm2708_emmc_dmamask = 0xffffffffUL;
++
++struct platform_device bcm2708_emmc_device = {
++	.name = "bcm2708_sdhci",
++	.id = 0,
++	.num_resources = ARRAY_SIZE(bcm2708_emmc_resources),
++	.resource = bcm2708_emmc_resources,
++	.dev = {
++		.dma_mask = &bcm2708_emmc_dmamask,
++		.coherent_dma_mask = 0xffffffffUL},
++};
++#endif /* CONFIG_MMC_SDHCI_BCM2708 */
++
++static struct resource bcm2708_powerman_resources[] = {
++	[0] = {
++	       .start = PM_BASE,
++	       .end = PM_BASE + SZ_256 - 1,
++	       .flags = IORESOURCE_MEM,
++	       },
++};
++
++static u64 powerman_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
++
++struct platform_device bcm2708_powerman_device = {
++	.name = "bcm2708_powerman",
++	.id = 0,
++	.num_resources = ARRAY_SIZE(bcm2708_powerman_resources),
++	.resource = bcm2708_powerman_resources,
++	.dev = {
++		.dma_mask = &powerman_dmamask,
++		.coherent_dma_mask = 0xffffffffUL},
++};
++
++
++static struct platform_device bcm2708_alsa_devices[] = {
++	[0] = {
++	       .name = "bcm2835_AUD0",
++	       .id = 0,		/* first audio device */
++	       .resource = 0,
++	       .num_resources = 0,
++	       },
++	[1] = {
++	       .name = "bcm2835_AUD1",
++	       .id = 1,		/* second audio device */
++	       .resource = 0,
++	       .num_resources = 0,
++	       },
++	[2] = {
++	       .name = "bcm2835_AUD2",
++	       .id = 2,		/* third audio device */
++	       .resource = 0,
++	       .num_resources = 0,
++	       },
++	[3] = {
++	       .name = "bcm2835_AUD3",
++	       .id = 3,		/* forth audio device */
++	       .resource = 0,
++	       .num_resources = 0,
++	       },
++	[4] = {
++	       .name = "bcm2835_AUD4",
++	       .id = 4,		/* fifth audio device */
++	       .resource = 0,
++	       .num_resources = 0,
++	       },
++	[5] = {
++	       .name = "bcm2835_AUD5",
++	       .id = 5,		/* sixth audio device */
++	       .resource = 0,
++	       .num_resources = 0,
++	       },
++	[6] = {
++	       .name = "bcm2835_AUD6",
++	       .id = 6,		/* seventh audio device */
++	       .resource = 0,
++	       .num_resources = 0,
++	       },
++	[7] = {
++	       .name = "bcm2835_AUD7",
++	       .id = 7,		/* eighth audio device */
++	       .resource = 0,
++	       .num_resources = 0,
++	       },
++};
++
++static struct resource bcm2708_spi_resources[] = {
++	{
++		.start = SPI0_BASE,
++		.end = SPI0_BASE + SZ_256 - 1,
++		.flags = IORESOURCE_MEM,
++	}, {
++		.start = IRQ_SPI,
++		.end = IRQ_SPI,
++		.flags = IORESOURCE_IRQ,
++	}
++};
++
++
++static u64 bcm2708_spi_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
++static struct platform_device bcm2708_spi_device = {
++	.name = "bcm2708_spi",
++	.id = 0,
++	.num_resources = ARRAY_SIZE(bcm2708_spi_resources),
++	.resource = bcm2708_spi_resources,
++	.dev = {
++		.dma_mask = &bcm2708_spi_dmamask,
++		.coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON)},
++};
++
++#ifdef CONFIG_BCM2708_SPIDEV
++static struct spi_board_info bcm2708_spi_devices[] = {
++#ifdef CONFIG_SPI_SPIDEV
++	{
++		.modalias = "spidev",
++		.max_speed_hz = 500000,
++		.bus_num = 0,
++		.chip_select = 0,
++		.mode = SPI_MODE_0,
++	}, {
++		.modalias = "spidev",
++		.max_speed_hz = 500000,
++		.bus_num = 0,
++		.chip_select = 1,
++		.mode = SPI_MODE_0,
++	}
++#endif
++};
++#endif
++
++static struct resource bcm2708_bsc0_resources[] = {
++	{
++		.start = BSC0_BASE,
++		.end = BSC0_BASE + SZ_256 - 1,
++		.flags = IORESOURCE_MEM,
++	}, {
++		.start = INTERRUPT_I2C,
++		.end = INTERRUPT_I2C,
++		.flags = IORESOURCE_IRQ,
++	}
++};
++
++static struct platform_device bcm2708_bsc0_device = {
++	.name = "bcm2708_i2c",
++	.id = 0,
++	.num_resources = ARRAY_SIZE(bcm2708_bsc0_resources),
++	.resource = bcm2708_bsc0_resources,
++};
++
++
++static struct resource bcm2708_bsc1_resources[] = {
++	{
++		.start = BSC1_BASE,
++		.end = BSC1_BASE + SZ_256 - 1,
++		.flags = IORESOURCE_MEM,
++	}, {
++		.start = INTERRUPT_I2C,
++		.end = INTERRUPT_I2C,
++		.flags = IORESOURCE_IRQ,
++	}
++};
++
++static struct platform_device bcm2708_bsc1_device = {
++	.name = "bcm2708_i2c",
++	.id = 1,
++	.num_resources = ARRAY_SIZE(bcm2708_bsc1_resources),
++	.resource = bcm2708_bsc1_resources,
++};
++
++static struct platform_device bcm2835_hwmon_device = {
++	.name = "bcm2835_hwmon",
++};
++
++static struct platform_device bcm2835_thermal_device = {
++	.name = "bcm2835_thermal",
++};
++
++#ifdef CONFIG_SND_BCM2708_SOC_I2S_MODULE
++static struct resource bcm2708_i2s_resources[] = {
++	{
++		.start = I2S_BASE,
++		.end = I2S_BASE + 0x20,
++		.flags = IORESOURCE_MEM,
++	},
++        {
++		.start = PCM_CLOCK_BASE,
++		.end = PCM_CLOCK_BASE + 0x02,
++		.flags = IORESOURCE_MEM,
++	}
++};
++
++static struct platform_device bcm2708_i2s_device = {
++	.name = "bcm2708-i2s",
++	.id = 0,
++	.num_resources = ARRAY_SIZE(bcm2708_i2s_resources),
++	.resource = bcm2708_i2s_resources,
++};
++#endif
++
++#if defined(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) || defined(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC_MODULE)
++static struct platform_device snd_hifiberry_dac_device = {
++        .name = "snd-hifiberry-dac",
++        .id = 0,
++        .num_resources = 0,
++};
++
++static struct platform_device snd_pcm5102a_codec_device = {
++        .name = "pcm5102a-codec",
++        .id = -1,
++        .num_resources = 0,
++};
++#endif
++
++#if defined(CONFIG_SND_BCM2708_SOC_RPI_DAC) || defined(CONFIG_SND_BCM2708_SOC_RPI_DAC_MODULE)
++static struct platform_device snd_rpi_dac_device = {
++        .name = "snd-rpi-dac",
++        .id = 0,
++        .num_resources = 0,
++};
++
++static struct platform_device snd_pcm1794a_codec_device = {
++        .name = "pcm1794a-codec",
++        .id = -1,
++        .num_resources = 0,
++};
++#endif
++
++int __init bcm_register_device(struct platform_device *pdev)
++{
++	int ret;
++
++	ret = platform_device_register(pdev);
++	if (ret)
++		pr_debug("Unable to register platform device '%s': %d\n",
++			 pdev->name, ret);
++
++	return ret;
++}
++
++int calc_rsts(int partition)
++{
++	return PM_PASSWORD |
++		((partition & (1 << 0))  << 0) |
++		((partition & (1 << 1))  << 1) |
++		((partition & (1 << 2))  << 2) |
++		((partition & (1 << 3))  << 3) |
++		((partition & (1 << 4))  << 4) |
++		((partition & (1 << 5))  << 5);
++}
++
++static void bcm2708_restart(enum reboot_mode mode, const char *cmd)
++{
++	extern char bcm2708_reboot_mode;
++	uint32_t pm_rstc, pm_wdog;
++	uint32_t timeout = 10;
++	uint32_t pm_rsts = 0;
++
++	if(bcm2708_reboot_mode == 'q')
++	{
++		// NOOBS < 1.3 booting with reboot=q
++		pm_rsts = readl(__io_address(PM_RSTS));
++		pm_rsts = PM_PASSWORD | pm_rsts | PM_RSTS_HADWRQ_SET;
++	}
++	else if(bcm2708_reboot_mode == 'p')
++	{
++		// NOOBS < 1.3 halting
++		pm_rsts = readl(__io_address(PM_RSTS));
++		pm_rsts = PM_PASSWORD | pm_rsts | PM_RSTS_HADWRH_SET;
++	}
++	else
++	{
++		pm_rsts = calc_rsts(reboot_part);
++	}
++
++	writel(pm_rsts, __io_address(PM_RSTS));
++
++	/* Setup watchdog for reset */
++	pm_rstc = readl(__io_address(PM_RSTC));
++
++	pm_wdog = PM_PASSWORD | (timeout & PM_WDOG_TIME_SET); // watchdog timer = timer clock / 16; need password (31:16) + value (11:0)
++	pm_rstc = PM_PASSWORD | (pm_rstc & PM_RSTC_WRCFG_CLR) | PM_RSTC_WRCFG_FULL_RESET;
++
++	writel(pm_wdog, __io_address(PM_WDOG));
++	writel(pm_rstc, __io_address(PM_RSTC));
++}
++
++/* We can't really power off, but if we do the normal reset scheme, and indicate to bootcode.bin not to reboot, then most of the chip will be powered off */
++static void bcm2708_power_off(void)
++{
++	extern char bcm2708_reboot_mode;
++	if(bcm2708_reboot_mode == 'q')
++	{
++		// NOOBS < v1.3
++		bcm2708_restart('p', "");
++	}
++	else
++	{
++		/* partition 63 is special code for HALT the bootloader knows not to boot*/
++		reboot_part = 63;
++		/* continue with normal reset mechanism */
++		bcm2708_restart(0, "");
++	}
++}
++
++void __init bcm2708_init(void)
++{
++	int i;
++
++#if defined(CONFIG_BCM_VC_CMA)
++	vc_cma_early_init();
++#endif
++	printk("bcm2708.uart_clock = %d\n", uart_clock);
++	pm_power_off = bcm2708_power_off;
++
++	if (uart_clock)
++		lookups[0].clk->rate = uart_clock;
++
++	for (i = 0; i < ARRAY_SIZE(lookups); i++)
++		clkdev_add(&lookups[i]);
++
++	bcm_register_device(&bcm2708_dmaman_device);
++	bcm_register_device(&bcm2708_vcio_device);
++#ifdef CONFIG_BCM2708_GPIO
++	bcm_register_device(&bcm2708_gpio_device);
++#endif
++#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE)
++	platform_device_register(&w1_device);
++#endif
++	bcm_register_device(&bcm2708_systemtimer_device);
++	bcm_register_device(&bcm2708_fb_device);
++	if (!fiq_fix_enable)
++	{
++		bcm2708_usb_device.resource = bcm2708_usb_resources_no_fiq_fix;
++		bcm2708_usb_device.num_resources = ARRAY_SIZE(bcm2708_usb_resources_no_fiq_fix);
++	}
++	bcm_register_device(&bcm2708_usb_device);
++	bcm_register_device(&bcm2708_uart1_device);
++	bcm_register_device(&bcm2708_powerman_device);
++
++#ifdef CONFIG_MMC_SDHCI_BCM2708
++	bcm_register_device(&bcm2708_emmc_device);
++#endif
++	bcm2708_init_led();
++	for (i = 0; i < ARRAY_SIZE(bcm2708_alsa_devices); i++)
++		bcm_register_device(&bcm2708_alsa_devices[i]);
++
++	bcm_register_device(&bcm2708_spi_device);
++	bcm_register_device(&bcm2708_bsc0_device);
++	bcm_register_device(&bcm2708_bsc1_device);
++
++	bcm_register_device(&bcm2835_hwmon_device);
++	bcm_register_device(&bcm2835_thermal_device);
++
++#ifdef CONFIG_SND_BCM2708_SOC_I2S_MODULE
++	bcm_register_device(&bcm2708_i2s_device);
++#endif
++
++#if defined(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) || defined(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC_MODULE)
++        bcm_register_device(&snd_hifiberry_dac_device);
++        bcm_register_device(&snd_pcm5102a_codec_device);
++#endif
++
++#if defined(CONFIG_SND_BCM2708_SOC_RPI_DAC) || defined(CONFIG_SND_BCM2708_SOC_RPI_DAC_MODULE)
++        bcm_register_device(&snd_rpi_dac_device);
++        bcm_register_device(&snd_pcm1794a_codec_device);
++#endif
++
++	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
++		struct amba_device *d = amba_devs[i];
++		amba_device_register(d, &iomem_resource);
++	}
++	system_rev = boardrev;
++	system_serial_low = serial;
++
++#ifdef CONFIG_BCM2708_SPIDEV
++	spi_register_board_info(bcm2708_spi_devices,
++			ARRAY_SIZE(bcm2708_spi_devices));
++#endif
++}
++
++static void timer_set_mode(enum clock_event_mode mode,
++			   struct clock_event_device *clk)
++{
++	switch (mode) {
++	case CLOCK_EVT_MODE_ONESHOT: /* Leave the timer disabled, .set_next_event will enable it */
++	case CLOCK_EVT_MODE_SHUTDOWN:
++		break;
++	case CLOCK_EVT_MODE_PERIODIC:
++
++	case CLOCK_EVT_MODE_UNUSED:
++	case CLOCK_EVT_MODE_RESUME:
++
++	default:
++		printk(KERN_ERR "timer_set_mode: unhandled mode:%d\n",
++		       (int)mode);
++		break;
++	}
++
++}
++
++static int timer_set_next_event(unsigned long cycles,
++				struct clock_event_device *unused)
++{
++	unsigned long stc;
++
++	stc = readl(__io_address(ST_BASE + 0x04));
++	writel(stc + cycles, __io_address(ST_BASE + 0x18));	/* stc3 */
++	return 0;
++}
++
++static struct clock_event_device timer0_clockevent = {
++	.name = "timer0",
++	.shift = 32,
++	.features = CLOCK_EVT_FEAT_ONESHOT,
++	.set_mode = timer_set_mode,
++	.set_next_event = timer_set_next_event,
++};
++
++/*
++ * IRQ handler for the timer
++ */
++static irqreturn_t bcm2708_timer_interrupt(int irq, void *dev_id)
++{
++	struct clock_event_device *evt = &timer0_clockevent;
++
++	writel(1 << 3, __io_address(ST_BASE + 0x00));	/* stcs clear timer int */
++
++	evt->event_handler(evt);
++
++	return IRQ_HANDLED;
++}
++
++static struct irqaction bcm2708_timer_irq = {
++	.name = "BCM2708 Timer Tick",
++	.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
++	.handler = bcm2708_timer_interrupt,
++};
++
++/*
++ * Set up timer interrupt, and return the current time in seconds.
++ */
++
++static struct delay_timer bcm2708_delay_timer = {
++	.read_current_timer = bcm2708_read_current_timer,
++	.freq = STC_FREQ_HZ,
++};
++
++static void __init bcm2708_timer_init(void)
++{
++	/* init high res timer */
++	bcm2708_clocksource_init();
++
++	/*
++	 * Initialise to a known state (all timers off)
++	 */
++	writel(0, __io_address(ARM_T_CONTROL));
++	/*
++	 * Make irqs happen for the system timer
++	 */
++	setup_irq(IRQ_TIMER3, &bcm2708_timer_irq);
++
++	setup_sched_clock(bcm2708_read_sched_clock, 32, STC_FREQ_HZ);
++
++	timer0_clockevent.mult =
++	    div_sc(STC_FREQ_HZ, NSEC_PER_SEC, timer0_clockevent.shift);
++	timer0_clockevent.max_delta_ns =
++	    clockevent_delta2ns(0xffffffff, &timer0_clockevent);
++	timer0_clockevent.min_delta_ns =
++	    clockevent_delta2ns(0xf, &timer0_clockevent);
++
++	timer0_clockevent.cpumask = cpumask_of(0);
++	clockevents_register_device(&timer0_clockevent);
++
++	register_current_timer_delay(&bcm2708_delay_timer);
++}
++
++#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
++#include <linux/leds.h>
++
++static struct gpio_led bcm2708_leds[] = {
++	[0] = {
++	       .gpio = 16,
++	       .name = "led0",
++	       .default_trigger = "mmc0",
++	       .active_low = 1,
++	       },
++};
++
++static struct gpio_led_platform_data bcm2708_led_pdata = {
++	.num_leds = ARRAY_SIZE(bcm2708_leds),
++	.leds = bcm2708_leds,
++};
++
++static struct platform_device bcm2708_led_device = {
++	.name = "leds-gpio",
++	.id = -1,
++	.dev = {
++		.platform_data = &bcm2708_led_pdata,
++		},
++};
++
++static void __init bcm2708_init_led(void)
++{
++	platform_device_register(&bcm2708_led_device);
++}
++#else
++static inline void bcm2708_init_led(void)
++{
++}
++#endif
++
++void __init bcm2708_init_early(void)
++{
++	/*
++	 * Some devices allocate their coherent buffers from atomic
++	 * context. Increase size of atomic coherent pool to make sure such
++	 * the allocations won't fail.
++	 */
++	init_dma_coherent_pool_size(SZ_4M);
++}
++
++static void __init board_reserve(void)
++{
++#if defined(CONFIG_BCM_VC_CMA)
++	vc_cma_reserve();
++#endif
++}
++
++MACHINE_START(BCM2708, "BCM2708")
++    /* Maintainer: Broadcom Europe Ltd. */
++	.map_io = bcm2708_map_io,
++	.init_irq = bcm2708_init_irq,
++	.init_time = bcm2708_timer_init,
++	.init_machine = bcm2708_init,
++	.init_early = bcm2708_init_early,
++	.reserve = board_reserve,
++	.restart	= bcm2708_restart,
++MACHINE_END
++
++module_param(boardrev, uint, 0644);
++module_param(serial, uint, 0644);
++module_param(uart_clock, uint, 0644);
++module_param(reboot_part, uint, 0644);
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/bcm2708_gpio.c linux-raspberry-pi/arch/arm/mach-bcm2708/bcm2708_gpio.c
+--- linux-3.12.6/arch/arm/mach-bcm2708/bcm2708_gpio.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/bcm2708_gpio.c	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,339 @@
++/*
++ *  linux/arch/arm/mach-bcm2708/bcm2708_gpio.c
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/spinlock.h>
++#include <linux/module.h>
++#include <linux/list.h>
++#include <linux/io.h>
++#include <linux/irq.h>
++#include <linux/interrupt.h>
++#include <linux/slab.h>
++#include <mach/gpio.h>
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++#include <mach/platform.h>
++
++#define BCM_GPIO_DRIVER_NAME "bcm2708_gpio"
++#define DRIVER_NAME BCM_GPIO_DRIVER_NAME
++#define BCM_GPIO_USE_IRQ 1
++
++#define GPIOFSEL(x)  (0x00+(x)*4)
++#define GPIOSET(x)   (0x1c+(x)*4)
++#define GPIOCLR(x)   (0x28+(x)*4)
++#define GPIOLEV(x)   (0x34+(x)*4)
++#define GPIOEDS(x)   (0x40+(x)*4)
++#define GPIOREN(x)   (0x4c+(x)*4)
++#define GPIOFEN(x)   (0x58+(x)*4)
++#define GPIOHEN(x)   (0x64+(x)*4)
++#define GPIOLEN(x)   (0x70+(x)*4)
++#define GPIOAREN(x)  (0x7c+(x)*4)
++#define GPIOAFEN(x)  (0x88+(x)*4)
++#define GPIOUD(x)    (0x94+(x)*4)
++#define GPIOUDCLK(x) (0x98+(x)*4)
++
++enum { GPIO_FSEL_INPUT, GPIO_FSEL_OUTPUT,
++	GPIO_FSEL_ALT5, GPIO_FSEL_ALT_4,
++	GPIO_FSEL_ALT0, GPIO_FSEL_ALT1,
++	GPIO_FSEL_ALT2, GPIO_FSEL_ALT3,
++};
++
++	/* Each of the two spinlocks protects a different set of hardware
++	 * regiters and data structurs. This decouples the code of the IRQ from
++	 * the GPIO code. This also makes the case of a GPIO routine call from
++	 * the IRQ code simpler.
++	 */
++static DEFINE_SPINLOCK(lock);	/* GPIO registers */
++
++struct bcm2708_gpio {
++	struct list_head list;
++	void __iomem *base;
++	struct gpio_chip gc;
++	unsigned long rising;
++	unsigned long falling;
++};
++
++static int bcm2708_set_function(struct gpio_chip *gc, unsigned offset,
++				int function)
++{
++	struct bcm2708_gpio *gpio = container_of(gc, struct bcm2708_gpio, gc);
++	unsigned long flags;
++	unsigned gpiodir;
++	unsigned gpio_bank = offset / 10;
++	unsigned gpio_field_offset = (offset - 10 * gpio_bank) * 3;
++
++//printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_set_function %p (%d,%d)\n", gc, offset, function);
++	if (offset >= ARCH_NR_GPIOS)
++		return -EINVAL;
++
++	spin_lock_irqsave(&lock, flags);
++
++	gpiodir = readl(gpio->base + GPIOFSEL(gpio_bank));
++	gpiodir &= ~(7 << gpio_field_offset);
++	gpiodir |= function << gpio_field_offset;
++	writel(gpiodir, gpio->base + GPIOFSEL(gpio_bank));
++	spin_unlock_irqrestore(&lock, flags);
++	gpiodir = readl(gpio->base + GPIOFSEL(gpio_bank));
++
++	return 0;
++}
++
++static int bcm2708_gpio_dir_in(struct gpio_chip *gc, unsigned offset)
++{
++	return bcm2708_set_function(gc, offset, GPIO_FSEL_INPUT);
++}
++
++static void bcm2708_gpio_set(struct gpio_chip *gc, unsigned offset, int value);
++static int bcm2708_gpio_dir_out(struct gpio_chip *gc, unsigned offset,
++				int value)
++{
++	int ret;
++	ret = bcm2708_set_function(gc, offset, GPIO_FSEL_OUTPUT);
++	if (ret >= 0)
++		bcm2708_gpio_set(gc, offset, value);
++	return ret;
++}
++
++static int bcm2708_gpio_get(struct gpio_chip *gc, unsigned offset)
++{
++	struct bcm2708_gpio *gpio = container_of(gc, struct bcm2708_gpio, gc);
++	unsigned gpio_bank = offset / 32;
++	unsigned gpio_field_offset = (offset - 32 * gpio_bank);
++	unsigned lev;
++
++	if (offset >= ARCH_NR_GPIOS)
++		return 0;
++	lev = readl(gpio->base + GPIOLEV(gpio_bank));
++//printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_get %p (%d)=%d\n", gc, offset, 0x1 & (lev>>gpio_field_offset));
++	return 0x1 & (lev >> gpio_field_offset);
++}
++
++static void bcm2708_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
++{
++	struct bcm2708_gpio *gpio = container_of(gc, struct bcm2708_gpio, gc);
++	unsigned gpio_bank = offset / 32;
++	unsigned gpio_field_offset = (offset - 32 * gpio_bank);
++//printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_set %p (%d=%d)\n", gc, offset, value);
++	if (offset >= ARCH_NR_GPIOS)
++		return;
++	if (value)
++		writel(1 << gpio_field_offset, gpio->base + GPIOSET(gpio_bank));
++	else
++		writel(1 << gpio_field_offset, gpio->base + GPIOCLR(gpio_bank));
++}
++
++/*************************************************************************************************************************
++ * bcm2708 GPIO IRQ
++ */
++
++#if BCM_GPIO_USE_IRQ
++
++static int bcm2708_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
++{
++	return gpio_to_irq(gpio);
++}
++
++static int bcm2708_gpio_irq_set_type(struct irq_data *d, unsigned type)
++{
++	unsigned irq = d->irq;
++	struct bcm2708_gpio *gpio = irq_get_chip_data(irq);
++
++	if (type & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
++		return -EINVAL;
++
++	if (type & IRQ_TYPE_EDGE_RISING) {
++		gpio->rising |= (1 << irq_to_gpio(irq));
++	} else {
++		gpio->rising &= ~(1 << irq_to_gpio(irq));
++	}
++
++	if (type & IRQ_TYPE_EDGE_FALLING) {
++		gpio->falling |= (1 << irq_to_gpio(irq));
++	} else {
++		gpio->falling &= ~(1 << irq_to_gpio(irq));
++	}
++	return 0;
++}
++
++static void bcm2708_gpio_irq_mask(struct irq_data *d)
++{
++	unsigned irq = d->irq;
++	struct bcm2708_gpio *gpio = irq_get_chip_data(irq);
++	unsigned gn = irq_to_gpio(irq);
++	unsigned gb = gn / 32;
++	unsigned long rising = readl(gpio->base + GPIOREN(gb));
++	unsigned long falling = readl(gpio->base + GPIOFEN(gb));
++
++	gn = gn % 32;
++
++	writel(rising & ~(1 << gn), gpio->base + GPIOREN(gb));
++	writel(falling & ~(1 << gn), gpio->base + GPIOFEN(gb));
++}
++
++static void bcm2708_gpio_irq_unmask(struct irq_data *d)
++{
++	unsigned irq = d->irq;
++	struct bcm2708_gpio *gpio = irq_get_chip_data(irq);
++	unsigned gn = irq_to_gpio(irq);
++	unsigned gb = gn / 32;
++	unsigned long rising = readl(gpio->base + GPIOREN(gb));
++	unsigned long falling = readl(gpio->base + GPIOFEN(gb));
++
++	gn = gn % 32;
++
++	writel(1 << gn, gpio->base + GPIOEDS(gb));
++
++	if (gpio->rising & (1 << gn)) {
++		writel(rising | (1 << gn), gpio->base + GPIOREN(gb));
++	} else {
++		writel(rising & ~(1 << gn), gpio->base + GPIOREN(gb));
++	}
++
++	if (gpio->falling & (1 << gn)) {
++		writel(falling | (1 << gn), gpio->base + GPIOFEN(gb));
++	} else {
++		writel(falling & ~(1 << gn), gpio->base + GPIOFEN(gb));
++	}
++}
++
++static struct irq_chip bcm2708_irqchip = {
++	.name = "GPIO",
++	.irq_enable = bcm2708_gpio_irq_unmask,
++	.irq_disable = bcm2708_gpio_irq_mask,
++	.irq_unmask = bcm2708_gpio_irq_unmask,
++	.irq_mask = bcm2708_gpio_irq_mask,
++	.irq_set_type = bcm2708_gpio_irq_set_type,
++};
++
++static irqreturn_t bcm2708_gpio_interrupt(int irq, void *dev_id)
++{
++	unsigned long edsr;
++	unsigned bank;
++	int i;
++	unsigned gpio;
++	for (bank = 0; bank <= 1; bank++) {
++		edsr = readl(__io_address(GPIO_BASE) + GPIOEDS(bank));
++		for_each_set_bit(i, &edsr, 32) {
++			gpio = i + bank * 32;
++			generic_handle_irq(gpio_to_irq(gpio));
++		}
++		writel(0xffffffff, __io_address(GPIO_BASE) + GPIOEDS(bank));
++	}
++	return IRQ_HANDLED;
++}
++
++static struct irqaction bcm2708_gpio_irq = {
++	.name = "BCM2708 GPIO catchall handler",
++	.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
++	.handler = bcm2708_gpio_interrupt,
++};
++
++static void bcm2708_gpio_irq_init(struct bcm2708_gpio *ucb)
++{
++	unsigned irq;
++
++	ucb->gc.to_irq = bcm2708_gpio_to_irq;
++
++	for (irq = GPIO_IRQ_START; irq < (GPIO_IRQ_START + GPIO_IRQS); irq++) {
++		irq_set_chip_data(irq, ucb);
++		irq_set_chip(irq, &bcm2708_irqchip);
++		set_irq_flags(irq, IRQF_VALID);
++	}
++	setup_irq(IRQ_GPIO3, &bcm2708_gpio_irq);
++}
++
++#else
++
++static void bcm2708_gpio_irq_init(struct bcm2708_gpio *ucb)
++{
++}
++
++#endif /* #if BCM_GPIO_USE_IRQ ***************************************************************************************************************** */
++
++static int bcm2708_gpio_probe(struct platform_device *dev)
++{
++	struct bcm2708_gpio *ucb;
++	struct resource *res;
++	int err = 0;
++
++	printk(KERN_INFO DRIVER_NAME ": bcm2708_gpio_probe %p\n", dev);
++
++	ucb = kzalloc(sizeof(*ucb), GFP_KERNEL);
++	if (NULL == ucb) {
++		printk(KERN_ERR DRIVER_NAME ": failed to allocate "
++		       "mailbox memory\n");
++		err = -ENOMEM;
++		goto err;
++	}
++
++	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
++
++	platform_set_drvdata(dev, ucb);
++	ucb->base = __io_address(GPIO_BASE);
++
++	ucb->gc.label = "bcm2708_gpio";
++	ucb->gc.base = 0;
++	ucb->gc.ngpio = ARCH_NR_GPIOS;
++	ucb->gc.owner = THIS_MODULE;
++
++	ucb->gc.direction_input = bcm2708_gpio_dir_in;
++	ucb->gc.direction_output = bcm2708_gpio_dir_out;
++	ucb->gc.get = bcm2708_gpio_get;
++	ucb->gc.set = bcm2708_gpio_set;
++	ucb->gc.can_sleep = 0;
++
++	bcm2708_gpio_irq_init(ucb);
++
++	err = gpiochip_add(&ucb->gc);
++	if (err)
++		goto err;
++
++err:
++	return err;
++
++}
++
++static int bcm2708_gpio_remove(struct platform_device *dev)
++{
++	int err = 0;
++	struct bcm2708_gpio *ucb = platform_get_drvdata(dev);
++
++	printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_remove %p\n", dev);
++
++	err = gpiochip_remove(&ucb->gc);
++
++	platform_set_drvdata(dev, NULL);
++	kfree(ucb);
++
++	return err;
++}
++
++static struct platform_driver bcm2708_gpio_driver = {
++	.probe = bcm2708_gpio_probe,
++	.remove = bcm2708_gpio_remove,
++	.driver = {
++		   .name = "bcm2708_gpio"},
++};
++
++static int __init bcm2708_gpio_init(void)
++{
++	return platform_driver_register(&bcm2708_gpio_driver);
++}
++
++static void __exit bcm2708_gpio_exit(void)
++{
++	platform_driver_unregister(&bcm2708_gpio_driver);
++}
++
++module_init(bcm2708_gpio_init);
++module_exit(bcm2708_gpio_exit);
++
++MODULE_DESCRIPTION("Broadcom BCM2708 GPIO driver");
++MODULE_LICENSE("GPL");
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/bcm2708.h linux-raspberry-pi/arch/arm/mach-bcm2708/bcm2708.h
+--- linux-3.12.6/arch/arm/mach-bcm2708/bcm2708.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/bcm2708.h	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,51 @@
++/*
++ * linux/arch/arm/mach-bcm2708/bcm2708.h
++ *
++ * BCM2708 machine support header
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#ifndef __BCM2708_BCM2708_H
++#define __BCM2708_BCM2708_H
++
++#include <linux/amba/bus.h>
++
++extern void __init bcm2708_init(void);
++extern void __init bcm2708_init_irq(void);
++extern void __init bcm2708_map_io(void);
++extern struct sys_timer bcm2708_timer;
++extern unsigned int mmc_status(struct device *dev);
++
++#define AMBA_DEVICE(name, busid, base, plat)			\
++static struct amba_device name##_device = {			\
++	.dev		= {					\
++		.coherent_dma_mask = ~0,			\
++		.init_name = busid,				\
++		.platform_data = plat,				\
++	},							\
++	.res		= {					\
++		.start	= base##_BASE,		\
++		.end	= (base##_BASE) + SZ_4K - 1,\
++		.flags	= IORESOURCE_MEM,			\
++	},							\
++	.dma_mask	= ~0,					\
++	.irq		= base##_IRQ,				\
++	/* .dma		= base##_DMA,*/				\
++}
++
++#endif
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/clock.c linux-raspberry-pi/arch/arm/mach-bcm2708/clock.c
+--- linux-3.12.6/arch/arm/mach-bcm2708/clock.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/clock.c	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,61 @@
++/*
++ *  linux/arch/arm/mach-bcm2708/clock.c
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/device.h>
++#include <linux/list.h>
++#include <linux/errno.h>
++#include <linux/err.h>
++#include <linux/string.h>
++#include <linux/clk.h>
++#include <linux/mutex.h>
++
++#include <asm/clkdev.h>
++
++#include "clock.h"
++
++int clk_enable(struct clk *clk)
++{
++	return 0;
++}
++EXPORT_SYMBOL(clk_enable);
++
++void clk_disable(struct clk *clk)
++{
++}
++EXPORT_SYMBOL(clk_disable);
++
++unsigned long clk_get_rate(struct clk *clk)
++{
++	return clk->rate;
++}
++EXPORT_SYMBOL(clk_get_rate);
++
++long clk_round_rate(struct clk *clk, unsigned long rate)
++{
++	return clk->rate;
++}
++EXPORT_SYMBOL(clk_round_rate);
++
++int clk_set_rate(struct clk *clk, unsigned long rate)
++{
++	return -EIO;
++}
++EXPORT_SYMBOL(clk_set_rate);
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/clock.h linux-raspberry-pi/arch/arm/mach-bcm2708/clock.h
+--- linux-3.12.6/arch/arm/mach-bcm2708/clock.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/clock.h	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,24 @@
++/*
++ *  linux/arch/arm/mach-bcm2708/clock.h
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++struct module;
++
++struct clk {
++	unsigned long		rate;
++};
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/dma.c linux-raspberry-pi/arch/arm/mach-bcm2708/dma.c
+--- linux-3.12.6/arch/arm/mach-bcm2708/dma.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/dma.c	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,399 @@
++/*
++ *  linux/arch/arm/mach-bcm2708/dma.c
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/slab.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/module.h>
++#include <linux/scatterlist.h>
++
++#include <mach/dma.h>
++#include <mach/irqs.h>
++
++/*****************************************************************************\
++ *									     *
++ * Configuration							     *
++ *									     *
++\*****************************************************************************/
++
++#define CACHE_LINE_MASK 31
++#define DRIVER_NAME BCM_DMAMAN_DRIVER_NAME
++#define DEFAULT_DMACHAN_BITMAP 0x10  /* channel 4 only */
++
++/* valid only for channels 0 - 14, 15 has its own base address */
++#define BCM2708_DMA_CHAN(n)	((n)<<8) /* base address */
++#define BCM2708_DMA_CHANIO(dma_base, n) \
++   ((void __iomem *)((char *)(dma_base)+BCM2708_DMA_CHAN(n)))
++
++
++/*****************************************************************************\
++ *									     *
++ * DMA Auxilliary Functions						     *
++ *									     *
++\*****************************************************************************/
++
++/* A DMA buffer on an arbitrary boundary may separate a cache line into a
++   section inside the DMA buffer and another section outside it.
++   Even if we flush DMA buffers from the cache there is always the chance that
++   during a DMA someone will access the part of a cache line that is outside
++   the DMA buffer - which will then bring in unwelcome data.
++   Without being able to dictate our own buffer pools we must insist that
++   DMA buffers consist of a whole number of cache lines.
++*/
++
++extern int
++bcm_sg_suitable_for_dma(struct scatterlist *sg_ptr, int sg_len)
++{
++	int i;
++
++	for (i = 0; i < sg_len; i++) {
++		if (sg_ptr[i].offset & CACHE_LINE_MASK ||
++		    sg_ptr[i].length & CACHE_LINE_MASK)
++			return 0;
++	}
++
++	return 1;
++}
++EXPORT_SYMBOL_GPL(bcm_sg_suitable_for_dma);
++
++extern void
++bcm_dma_start(void __iomem *dma_chan_base, dma_addr_t control_block)
++{
++	dsb();	/* ARM data synchronization (push) operation */
++
++	writel(control_block,	     dma_chan_base + BCM2708_DMA_ADDR);
++	writel(BCM2708_DMA_ACTIVE,   dma_chan_base + BCM2708_DMA_CS);
++}
++
++extern void bcm_dma_wait_idle(void __iomem *dma_chan_base)
++{
++  dsb();
++
++  /* ugly busy wait only option for now */
++  while (readl(dma_chan_base + BCM2708_DMA_CS) & BCM2708_DMA_ACTIVE)
++    cpu_relax();
++}
++
++EXPORT_SYMBOL_GPL(bcm_dma_start);
++
++/* Complete an ongoing DMA (assuming its results are to be ignored)
++   Does nothing if there is no DMA in progress.
++   This routine waits for the current AXI transfer to complete before
++   terminating the current DMA.	 If the current transfer is hung on a DREQ used
++   by an uncooperative peripheral the AXI transfer may never complete.	In this
++   case the routine times out and return a non-zero error code.
++   Use of this routine doesn't guarantee that the ongoing or aborted DMA
++   does not produce an interrupt.
++*/
++extern int
++bcm_dma_abort(void __iomem *dma_chan_base)
++{
++	unsigned long int cs;
++	int rc = 0;
++
++	cs = readl(dma_chan_base + BCM2708_DMA_CS);
++
++	if (BCM2708_DMA_ACTIVE & cs) {
++		long int timeout = 10000;
++
++		/* write 0 to the active bit - pause the DMA */
++		writel(0, dma_chan_base + BCM2708_DMA_CS);
++
++		/* wait for any current AXI transfer to complete */
++		while (0 != (cs & BCM2708_DMA_ISPAUSED) && --timeout >= 0)
++			cs = readl(dma_chan_base + BCM2708_DMA_CS);
++
++		if (0 != (cs & BCM2708_DMA_ISPAUSED)) {
++			/* we'll un-pause when we set of our next DMA */
++			rc = -ETIMEDOUT;
++
++		} else if (BCM2708_DMA_ACTIVE & cs) {
++			/* terminate the control block chain */
++			writel(0, dma_chan_base + BCM2708_DMA_NEXTCB);
++
++			/* abort the whole DMA */
++			writel(BCM2708_DMA_ABORT | BCM2708_DMA_ACTIVE,
++			       dma_chan_base + BCM2708_DMA_CS);
++		}
++	}
++
++	return rc;
++}
++EXPORT_SYMBOL_GPL(bcm_dma_abort);
++
++
++/***************************************************************************** \
++ *									     *
++ * DMA Manager Device Methods						     *
++ *									     *
++\*****************************************************************************/
++
++struct vc_dmaman {
++	void __iomem *dma_base;
++	u32 chan_available; /* bitmap of available channels */
++	u32 has_feature[BCM_DMA_FEATURE_COUNT]; /* bitmap of feature presence */
++};
++
++static void vc_dmaman_init(struct vc_dmaman *dmaman, void __iomem *dma_base,
++			   u32 chans_available)
++{
++	dmaman->dma_base = dma_base;
++	dmaman->chan_available = chans_available;
++	dmaman->has_feature[BCM_DMA_FEATURE_FAST_ORD] = 0x0c;  /* chans 2 & 3 */
++	dmaman->has_feature[BCM_DMA_FEATURE_BULK_ORD] = 0x01;  /* chan 0 */
++}
++
++static int vc_dmaman_chan_alloc(struct vc_dmaman *dmaman,
++				unsigned preferred_feature_set)
++{
++	u32 chans;
++	int feature;
++
++	chans = dmaman->chan_available;
++	for (feature = 0; feature < BCM_DMA_FEATURE_COUNT; feature++)
++		/* select the subset of available channels with the desired
++		   feature so long as some of the candidate channels have that
++		   feature */
++		if ((preferred_feature_set & (1 << feature)) &&
++		    (chans & dmaman->has_feature[feature]))
++			chans &= dmaman->has_feature[feature];
++
++	if (chans) {
++		int chan = 0;
++		/* return the ordinal of the first channel in the bitmap */
++		while (chans != 0 && (chans & 1) == 0) {
++			chans >>= 1;
++			chan++;
++		}
++		/* claim the channel */
++		dmaman->chan_available &= ~(1 << chan);
++		return chan;
++	} else
++		return -ENOMEM;
++}
++
++static int vc_dmaman_chan_free(struct vc_dmaman *dmaman, int chan)
++{
++	if (chan < 0)
++		return -EINVAL;
++	else if ((1 << chan) & dmaman->chan_available)
++		return -EIDRM;
++	else {
++		dmaman->chan_available |= (1 << chan);
++		return 0;
++	}
++}
++
++/*****************************************************************************\
++ *									     *
++ * DMA IRQs								     *
++ *									     *
++\*****************************************************************************/
++
++static unsigned char bcm_dma_irqs[] = {
++	IRQ_DMA0,
++	IRQ_DMA1,
++	IRQ_DMA2,
++	IRQ_DMA3,
++	IRQ_DMA4,
++	IRQ_DMA5,
++	IRQ_DMA6,
++	IRQ_DMA7,
++	IRQ_DMA8,
++	IRQ_DMA9,
++	IRQ_DMA10,
++	IRQ_DMA11,
++	IRQ_DMA12
++};
++
++
++/***************************************************************************** \
++ *									     *
++ * DMA Manager Monitor							     *
++ *									     *
++\*****************************************************************************/
++
++static struct device *dmaman_dev;	/* we assume there's only one! */
++
++extern int bcm_dma_chan_alloc(unsigned preferred_feature_set,
++			      void __iomem **out_dma_base, int *out_dma_irq)
++{
++	if (!dmaman_dev)
++		return -ENODEV;
++	else {
++		struct vc_dmaman *dmaman  = dev_get_drvdata(dmaman_dev);
++		int rc;
++
++		device_lock(dmaman_dev);
++		rc = vc_dmaman_chan_alloc(dmaman, preferred_feature_set);
++		if (rc >= 0) {
++			*out_dma_base = BCM2708_DMA_CHANIO(dmaman->dma_base,
++							   rc);
++			*out_dma_irq = bcm_dma_irqs[rc];
++		}
++		device_unlock(dmaman_dev);
++
++		return rc;
++	}
++}
++EXPORT_SYMBOL_GPL(bcm_dma_chan_alloc);
++
++extern int bcm_dma_chan_free(int channel)
++{
++	if (dmaman_dev) {
++		struct vc_dmaman *dmaman = dev_get_drvdata(dmaman_dev);
++		int rc;
++
++		device_lock(dmaman_dev);
++		rc = vc_dmaman_chan_free(dmaman, channel);
++		device_unlock(dmaman_dev);
++
++		return rc;
++	} else
++		return -ENODEV;
++}
++EXPORT_SYMBOL_GPL(bcm_dma_chan_free);
++
++static int dev_dmaman_register(const char *dev_name, struct device *dev)
++{
++	int rc = dmaman_dev ? -EINVAL : 0;
++	dmaman_dev = dev;
++	return rc;
++}
++
++static void dev_dmaman_deregister(const char *dev_name, struct device *dev)
++{
++	dmaman_dev = NULL;
++}
++
++/*****************************************************************************\
++ *									     *
++ * DMA Device								     *
++ *									     *
++\*****************************************************************************/
++
++static int dmachans = -1; /* module parameter */
++
++static int bcm_dmaman_probe(struct platform_device *pdev)
++{
++	int ret = 0;
++	struct vc_dmaman *dmaman;
++	struct resource *dma_res = NULL;
++	void __iomem *dma_base = NULL;
++	int have_dma_region = 0;
++
++	dmaman = kzalloc(sizeof(*dmaman), GFP_KERNEL);
++	if (NULL == dmaman) {
++		printk(KERN_ERR DRIVER_NAME ": failed to allocate "
++		       "DMA management memory\n");
++		ret = -ENOMEM;
++	} else {
++
++		dma_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++		if (dma_res == NULL) {
++			printk(KERN_ERR DRIVER_NAME ": failed to obtain memory "
++			       "resource\n");
++			ret = -ENODEV;
++		} else if (!request_mem_region(dma_res->start,
++					       resource_size(dma_res),
++					       DRIVER_NAME)) {
++			dev_err(&pdev->dev, "cannot obtain DMA region\n");
++			ret = -EBUSY;
++		} else {
++			have_dma_region = 1;
++			dma_base = ioremap(dma_res->start,
++					   resource_size(dma_res));
++			if (!dma_base) {
++				dev_err(&pdev->dev, "cannot map DMA region\n");
++				ret = -ENOMEM;
++			} else {
++				/* use module parameter if one was provided */
++				if (dmachans > 0)
++					vc_dmaman_init(dmaman, dma_base,
++						       dmachans);
++				else
++					vc_dmaman_init(dmaman, dma_base,
++						       DEFAULT_DMACHAN_BITMAP);
++
++				platform_set_drvdata(pdev, dmaman);
++				dev_dmaman_register(DRIVER_NAME, &pdev->dev);
++
++				printk(KERN_INFO DRIVER_NAME ": DMA manager "
++				       "at %p\n", dma_base);
++			}
++		}
++	}
++	if (ret != 0) {
++		if (dma_base)
++			iounmap(dma_base);
++		if (dma_res && have_dma_region)
++			release_mem_region(dma_res->start,
++					   resource_size(dma_res));
++		if (dmaman)
++			kfree(dmaman);
++	}
++	return ret;
++}
++
++static int bcm_dmaman_remove(struct platform_device *pdev)
++{
++	struct vc_dmaman *dmaman = platform_get_drvdata(pdev);
++
++	platform_set_drvdata(pdev, NULL);
++	dev_dmaman_deregister(DRIVER_NAME, &pdev->dev);
++	kfree(dmaman);
++
++	return 0;
++}
++
++static struct platform_driver bcm_dmaman_driver = {
++	.probe = bcm_dmaman_probe,
++	.remove = bcm_dmaman_remove,
++
++	.driver = {
++		   .name = DRIVER_NAME,
++		   .owner = THIS_MODULE,
++		   },
++};
++
++/*****************************************************************************\
++ *									     *
++ * Driver init/exit							     *
++ *									     *
++\*****************************************************************************/
++
++static int __init bcm_dmaman_drv_init(void)
++{
++	int ret;
++
++	ret = platform_driver_register(&bcm_dmaman_driver);
++	if (ret != 0) {
++		printk(KERN_ERR DRIVER_NAME ": failed to register "
++		       "on platform\n");
++	}
++
++	return ret;
++}
++
++static void __exit bcm_dmaman_drv_exit(void)
++{
++	platform_driver_unregister(&bcm_dmaman_driver);
++}
++
++module_init(bcm_dmaman_drv_init);
++module_exit(bcm_dmaman_drv_exit);
++
++module_param(dmachans, int, 0644);
++
++MODULE_AUTHOR("Gray Girling <grayg@broadcom.com>");
++MODULE_DESCRIPTION("DMA channel manager driver");
++MODULE_LICENSE("GPL");
++
++MODULE_PARM_DESC(dmachans, "Bitmap of DMA channels available to the ARM");
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/dmaer.c linux-raspberry-pi/arch/arm/mach-bcm2708/dmaer.c
+--- linux-3.12.6/arch/arm/mach-bcm2708/dmaer.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/dmaer.c	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,886 @@
++#include <linux/init.h>
++#include <linux/sched.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/kdev_t.h>
++#include <linux/fs.h>
++#include <linux/cdev.h>
++#include <linux/mm.h>
++#include <linux/slab.h>
++#include <linux/pagemap.h>
++#include <linux/device.h>
++#include <linux/jiffies.h>
++#include <linux/timex.h>
++#include <linux/dma-mapping.h>
++
++#include <asm/uaccess.h>
++#include <asm/atomic.h>
++#include <asm/cacheflush.h>
++#include <asm/io.h>
++
++#include <mach/dma.h>
++#include <mach/vc_support.h>
++
++#ifdef ECLIPSE_IGNORE
++
++#define __user
++#define __init
++#define __exit
++#define __iomem
++#define KERN_DEBUG
++#define KERN_ERR
++#define KERN_WARNING
++#define KERN_INFO
++#define _IOWR(a, b, c) b
++#define _IOW(a, b, c) b
++#define _IO(a, b) b
++
++#endif
++
++//#define inline
++
++#define PRINTK(args...) printk(args)
++//#define PRINTK_VERBOSE(args...) printk(args)
++//#define PRINTK(args...)
++#define PRINTK_VERBOSE(args...)
++
++/***** TYPES ****/
++#define PAGES_PER_LIST 500
++struct PageList
++{
++	struct page *m_pPages[PAGES_PER_LIST];
++	unsigned int m_used;
++	struct PageList *m_pNext;
++};
++
++struct VmaPageList
++{
++	//each vma has a linked list of pages associated with it
++	struct PageList *m_pPageHead;
++	struct PageList *m_pPageTail;
++	unsigned int m_refCount;
++};
++
++struct DmaControlBlock
++{
++	unsigned int m_transferInfo;
++	void __user *m_pSourceAddr;
++	void __user *m_pDestAddr;
++	unsigned int m_xferLen;
++	unsigned int m_tdStride;
++	struct DmaControlBlock *m_pNext;
++	unsigned int m_blank1, m_blank2;
++};
++
++/***** DEFINES ******/
++//magic number defining the module
++#define DMA_MAGIC		0xdd
++
++//do user virtual to physical translation of the CB chain
++#define DMA_PREPARE		_IOWR(DMA_MAGIC, 0, struct DmaControlBlock *)
++
++//kick the pre-prepared CB chain
++#define DMA_KICK		_IOW(DMA_MAGIC, 1, struct DmaControlBlock *)
++
++//prepare it, kick it, wait for it
++#define DMA_PREPARE_KICK_WAIT	_IOWR(DMA_MAGIC, 2, struct DmaControlBlock *)
++
++//prepare it, kick it, don't wait for it
++#define DMA_PREPARE_KICK	_IOWR(DMA_MAGIC, 3, struct DmaControlBlock *)
++
++//not currently implemented
++#define DMA_WAIT_ONE		_IO(DMA_MAGIC, 4, struct DmaControlBlock *)
++
++//wait on all kicked CB chains
++#define DMA_WAIT_ALL		_IO(DMA_MAGIC, 5)
++
++//in order to discover the largest AXI burst that should be programmed into the transfer params
++#define DMA_MAX_BURST		_IO(DMA_MAGIC, 6)
++
++//set the address range through which the user address is assumed to already by a physical address
++#define DMA_SET_MIN_PHYS	_IOW(DMA_MAGIC, 7, unsigned long)
++#define DMA_SET_MAX_PHYS	_IOW(DMA_MAGIC, 8, unsigned long)
++#define DMA_SET_PHYS_OFFSET	_IOW(DMA_MAGIC, 9, unsigned long)
++
++//used to define the size for the CMA-based allocation *in pages*, can only be done once once the file is opened
++#define DMA_CMA_SET_SIZE	_IOW(DMA_MAGIC, 10, unsigned long)
++
++//used to get the version of the module, to test for a capability
++#define DMA_GET_VERSION		_IO(DMA_MAGIC, 99)
++
++#define VERSION_NUMBER 1
++
++#define VIRT_TO_BUS_CACHE_SIZE 8
++
++/***** FILE OPS *****/
++static int Open(struct inode *pInode, struct file *pFile);
++static int Release(struct inode *pInode, struct file *pFile);
++static long Ioctl(struct file *pFile, unsigned int cmd, unsigned long arg);
++static ssize_t Read(struct file *pFile, char __user *pUser, size_t count, loff_t *offp);
++static int Mmap(struct file *pFile, struct vm_area_struct *pVma);
++
++/***** VMA OPS ****/
++static void VmaOpen4k(struct vm_area_struct *pVma);
++static void VmaClose4k(struct vm_area_struct *pVma);
++static int VmaFault4k(struct vm_area_struct *pVma, struct vm_fault *pVmf);
++
++/**** DMA PROTOTYPES */
++static struct DmaControlBlock __user *DmaPrepare(struct DmaControlBlock __user *pUserCB, int *pError);
++static int DmaKick(struct DmaControlBlock __user *pUserCB);
++static void DmaWaitAll(void);
++
++/**** GENERIC ****/
++static int __init dmaer_init(void);
++static void __exit dmaer_exit(void);
++
++/*** OPS ***/
++static struct vm_operations_struct g_vmOps4k = {
++	.open = VmaOpen4k,
++	.close = VmaClose4k,
++	.fault = VmaFault4k,
++};
++
++static struct file_operations g_fOps = {
++	.owner = THIS_MODULE,
++	.llseek = 0,
++	.read = Read,
++	.write = 0,
++	.unlocked_ioctl = Ioctl,
++	.open = Open,
++	.release = Release,
++	.mmap = Mmap,
++};
++
++/***** GLOBALS ******/
++static dev_t g_majorMinor;
++
++//tracking usage of the two files
++static atomic_t g_oneLock4k = ATOMIC_INIT(1);
++
++//device operations
++static struct cdev g_cDev;
++static int g_trackedPages = 0;
++
++//dma control
++static unsigned int *g_pDmaChanBase;
++static int g_dmaIrq;
++static int g_dmaChan;
++
++//cma allocation
++static int g_cmaHandle;
++
++//user virtual to bus address translation acceleration
++static unsigned long g_virtAddr[VIRT_TO_BUS_CACHE_SIZE];
++static unsigned long g_busAddr[VIRT_TO_BUS_CACHE_SIZE];
++static unsigned long g_cbVirtAddr;
++static unsigned long g_cbBusAddr;
++static int g_cacheInsertAt;
++static int g_cacheHit, g_cacheMiss;
++
++//off by default
++static void __user *g_pMinPhys;
++static void __user *g_pMaxPhys;
++static unsigned long g_physOffset;
++
++/****** CACHE OPERATIONS ********/
++static inline void FlushAddrCache(void)
++{
++	int count = 0;
++	for (count = 0; count < VIRT_TO_BUS_CACHE_SIZE; count++)
++		g_virtAddr[count] = 0xffffffff;			//never going to match as we always chop the bottom bits anyway
++
++	g_cbVirtAddr = 0xffffffff;
++
++	g_cacheInsertAt = 0;
++}
++
++//translate from a user virtual address to a bus address by mapping the page
++//NB this won't lock a page in memory, so to avoid potential paging issues using kernel logical addresses
++static inline void __iomem *UserVirtualToBus(void __user *pUser)
++{
++	int mapped;
++	struct page *pPage;
++	void *phys;
++
++	//map it (requiring that the pointer points to something that does not hang off the page boundary)
++	mapped = get_user_pages(current, current->mm,
++		(unsigned long)pUser, 1,
++		1, 0,
++		&pPage,
++		0);
++
++	if (mapped <= 0)		//error
++		return 0;
++
++	PRINTK_VERBOSE(KERN_DEBUG "user virtual %p arm phys %p bus %p\n",
++			pUser, page_address(pPage), (void __iomem *)__virt_to_bus(page_address(pPage)));
++
++	//get the arm physical address
++	phys = page_address(pPage) + offset_in_page(pUser);
++	page_cache_release(pPage);
++
++	//and now the bus address
++	return (void __iomem *)__virt_to_bus(phys);
++}
++
++static inline void __iomem *UserVirtualToBusViaCbCache(void __user *pUser)
++{
++	unsigned long virtual_page = (unsigned long)pUser & ~4095;
++	unsigned long page_offset = (unsigned long)pUser & 4095;
++	unsigned long bus_addr;
++
++	if (g_cbVirtAddr == virtual_page)
++	{
++		bus_addr = g_cbBusAddr + page_offset;
++		g_cacheHit++;
++		return (void __iomem *)bus_addr;
++	}
++	else
++	{
++		bus_addr = (unsigned long)UserVirtualToBus(pUser);
++
++		if (!bus_addr)
++			return 0;
++
++		g_cbVirtAddr = virtual_page;
++		g_cbBusAddr = bus_addr & ~4095;
++		g_cacheMiss++;
++
++		return (void __iomem *)bus_addr;
++	}
++}
++
++//do the same as above, by query our virt->bus cache
++static inline void __iomem *UserVirtualToBusViaCache(void __user *pUser)
++{
++	int count;
++	//get the page and its offset
++	unsigned long virtual_page = (unsigned long)pUser & ~4095;
++	unsigned long page_offset = (unsigned long)pUser & 4095;
++	unsigned long bus_addr;
++
++	if (pUser >= g_pMinPhys && pUser < g_pMaxPhys)
++	{
++		PRINTK_VERBOSE(KERN_DEBUG "user->phys passthrough on %p\n", pUser);
++		return (void __iomem *)((unsigned long)pUser + g_physOffset);
++	}
++
++	//check the cache for our entry
++	for (count = 0; count < VIRT_TO_BUS_CACHE_SIZE; count++)
++		if (g_virtAddr[count] == virtual_page)
++		{
++			bus_addr = g_busAddr[count] + page_offset;
++			g_cacheHit++;
++			return (void __iomem *)bus_addr;
++		}
++
++	//not found, look up manually and then insert its page address
++	bus_addr = (unsigned long)UserVirtualToBus(pUser);
++
++	if (!bus_addr)
++		return 0;
++
++	g_virtAddr[g_cacheInsertAt] = virtual_page;
++	g_busAddr[g_cacheInsertAt] = bus_addr & ~4095;
++
++	//round robin
++	g_cacheInsertAt++;
++	if (g_cacheInsertAt == VIRT_TO_BUS_CACHE_SIZE)
++		g_cacheInsertAt = 0;
++
++	g_cacheMiss++;
++
++	return (void __iomem *)bus_addr;
++}
++
++/***** FILE OPERATIONS ****/
++static int Open(struct inode *pInode, struct file *pFile)
++{
++	PRINTK(KERN_DEBUG "file opening: %d/%d\n", imajor(pInode), iminor(pInode));
++
++	//check which device we are
++	if (iminor(pInode) == 0)		//4k
++	{
++		//only one at a time
++		if (!atomic_dec_and_test(&g_oneLock4k))
++		{
++			atomic_inc(&g_oneLock4k);
++			return -EBUSY;
++		}
++	}
++	else
++		return -EINVAL;
++
++	//todo there will be trouble if two different processes open the files
++
++	//reset after any file is opened
++	g_pMinPhys = (void __user *)-1;
++	g_pMaxPhys = (void __user *)0;
++	g_physOffset = 0;
++	g_cmaHandle = 0;
++
++	return 0;
++}
++
++static int Release(struct inode *pInode, struct file *pFile)
++{
++	PRINTK(KERN_DEBUG "file closing, %d pages tracked\n", g_trackedPages);
++	if (g_trackedPages)
++		PRINTK(KERN_ERR "we\'re leaking memory!\n");
++
++	//wait for any dmas to finish
++	DmaWaitAll();
++
++	//free this memory on the application closing the file or it crashing (implicitly closing the file)
++	if (g_cmaHandle)
++	{
++		PRINTK(KERN_DEBUG "unlocking vc memory\n");
++		if (UnlockVcMemory(g_cmaHandle))
++			PRINTK(KERN_ERR "uh-oh, unable to unlock vc memory!\n");
++		PRINTK(KERN_DEBUG "releasing vc memory\n");
++		if (ReleaseVcMemory(g_cmaHandle))
++			PRINTK(KERN_ERR "uh-oh, unable to release vc memory!\n");
++	}
++
++	if (iminor(pInode) == 0)
++		atomic_inc(&g_oneLock4k);
++	else
++		return -EINVAL;
++
++	return 0;
++}
++
++static struct DmaControlBlock __user *DmaPrepare(struct DmaControlBlock __user *pUserCB, int *pError)
++{
++	struct DmaControlBlock kernCB;
++	struct DmaControlBlock __user *pUNext;
++	void __iomem *pSourceBus, __iomem *pDestBus;
++
++	//get the control block into kernel memory so we can work on it
++	if (copy_from_user(&kernCB, pUserCB, sizeof(struct DmaControlBlock)) != 0)
++	{
++		PRINTK(KERN_ERR "copy_from_user failed for user cb %p\n", pUserCB);
++		*pError = 1;
++		return 0;
++	}
++
++	if (kernCB.m_pSourceAddr == 0 || kernCB.m_pDestAddr == 0)
++	{
++		PRINTK(KERN_ERR "faulty source (%p) dest (%p) addresses for user cb %p\n",
++			kernCB.m_pSourceAddr, kernCB.m_pDestAddr, pUserCB);
++		*pError = 1;
++		return 0;
++	}
++
++	pSourceBus = UserVirtualToBusViaCache(kernCB.m_pSourceAddr);
++	pDestBus = UserVirtualToBusViaCache(kernCB.m_pDestAddr);
++
++	if (!pSourceBus || !pDestBus)
++	{
++		PRINTK(KERN_ERR "virtual to bus translation failure for source/dest %p/%p->%p/%p\n",
++				kernCB.m_pSourceAddr, kernCB.m_pDestAddr,
++				pSourceBus, pDestBus);
++		*pError = 1;
++		return 0;
++	}
++
++	//update the user structure with the new bus addresses
++	kernCB.m_pSourceAddr = pSourceBus;
++	kernCB.m_pDestAddr = pDestBus;
++
++	PRINTK_VERBOSE(KERN_DEBUG "final source %p dest %p\n", kernCB.m_pSourceAddr, kernCB.m_pDestAddr);
++
++	//sort out the bus address for the next block
++	pUNext = kernCB.m_pNext;
++
++	if (kernCB.m_pNext)
++	{
++		void __iomem *pNextBus;
++		pNextBus = UserVirtualToBusViaCbCache(kernCB.m_pNext);
++
++		if (!pNextBus)
++		{
++			PRINTK(KERN_ERR "virtual to bus translation failure for m_pNext\n");
++			*pError = 1;
++			return 0;
++		}
++
++		//update the pointer with the bus address
++		kernCB.m_pNext = pNextBus;
++	}
++
++	//write it back to user space
++	if (copy_to_user(pUserCB, &kernCB, sizeof(struct DmaControlBlock)) != 0)
++	{
++		PRINTK(KERN_ERR "copy_to_user failed for cb %p\n", pUserCB);
++		*pError = 1;
++		return 0;
++	}
++
++	__cpuc_flush_dcache_area(pUserCB, 32);
++
++	*pError = 0;
++	return pUNext;
++}
++
++static int DmaKick(struct DmaControlBlock __user *pUserCB)
++{
++	void __iomem *pBusCB;
++
++	pBusCB = UserVirtualToBusViaCbCache(pUserCB);
++	if (!pBusCB)
++	{
++		PRINTK(KERN_ERR "virtual to bus translation failure for cb\n");
++		return 1;
++	}
++
++	//flush_cache_all();
++
++	bcm_dma_start(g_pDmaChanBase, (dma_addr_t)pBusCB);
++
++	return 0;
++}
++
++static void DmaWaitAll(void)
++{
++	int counter = 0;
++	volatile int inner_count;
++	volatile unsigned int cs;
++	unsigned long time_before, time_after;
++
++	time_before = jiffies;
++	//bcm_dma_wait_idle(g_pDmaChanBase);
++	dsb();
++
++	cs = readl(g_pDmaChanBase);
++
++	while ((cs & 1) == 1)
++	{
++		cs = readl(g_pDmaChanBase);
++		counter++;
++
++		for (inner_count = 0; inner_count < 32; inner_count++);
++
++		asm volatile ("MCR p15,0,r0,c7,c0,4 \n");
++		//cpu_do_idle();
++		if (counter >= 1000000)
++		{
++			PRINTK(KERN_WARNING "DMA failed to finish in a timely fashion\n");
++			break;
++		}
++	}
++	time_after = jiffies;
++	PRINTK_VERBOSE(KERN_DEBUG "done, counter %d, cs %08x", counter, cs);
++	PRINTK_VERBOSE(KERN_DEBUG "took %ld jiffies, %d HZ\n", time_after - time_before, HZ);
++}
++
++static long Ioctl(struct file *pFile, unsigned int cmd, unsigned long arg)
++{
++	int error = 0;
++	PRINTK_VERBOSE(KERN_DEBUG "ioctl cmd %x arg %lx\n", cmd, arg);
++
++	switch (cmd)
++	{
++	case DMA_PREPARE:
++	case DMA_PREPARE_KICK:
++	case DMA_PREPARE_KICK_WAIT:
++		{
++			struct DmaControlBlock __user *pUCB = (struct DmaControlBlock *)arg;
++			int steps = 0;
++			unsigned long start_time = jiffies;
++			(void)start_time;
++
++			//flush our address cache
++			FlushAddrCache();
++
++			PRINTK_VERBOSE(KERN_DEBUG "dma prepare\n");
++
++			//do virtual to bus translation for each entry
++			do
++			{
++				pUCB = DmaPrepare(pUCB, &error);
++			} while (error == 0 && ++steps && pUCB);
++			PRINTK_VERBOSE(KERN_DEBUG "prepare done in %d steps, %ld\n", steps, jiffies - start_time);
++
++			//carry straight on if we want to kick too
++			if (cmd == DMA_PREPARE || error)
++			{
++				PRINTK_VERBOSE(KERN_DEBUG "falling out\n");
++				return error ? -EINVAL : 0;
++			}
++		}
++	case DMA_KICK:
++		PRINTK_VERBOSE(KERN_DEBUG "dma begin\n");
++
++		if (cmd == DMA_KICK)
++			FlushAddrCache();
++
++		DmaKick((struct DmaControlBlock __user *)arg);
++
++		if (cmd != DMA_PREPARE_KICK_WAIT)
++			break;
++/*	case DMA_WAIT_ONE:
++		//PRINTK(KERN_DEBUG "dma wait one\n");
++		break;*/
++	case DMA_WAIT_ALL:
++		//PRINTK(KERN_DEBUG "dma wait all\n");
++		DmaWaitAll();
++		break;
++	case DMA_MAX_BURST:
++		if (g_dmaChan == 0)
++			return 10;
++		else
++			return 5;
++	case DMA_SET_MIN_PHYS:
++		g_pMinPhys = (void __user *)arg;
++		PRINTK(KERN_DEBUG "min/max user/phys bypass set to %p %p\n", g_pMinPhys, g_pMaxPhys);
++		break;
++	case DMA_SET_MAX_PHYS:
++		g_pMaxPhys = (void __user *)arg;
++		PRINTK(KERN_DEBUG "min/max user/phys bypass set to %p %p\n", g_pMinPhys, g_pMaxPhys);
++		break;
++	case DMA_SET_PHYS_OFFSET:
++		g_physOffset = arg;
++		PRINTK(KERN_DEBUG "user/phys bypass offset set to %ld\n", g_physOffset);
++		break;
++	case DMA_CMA_SET_SIZE:
++	{
++		unsigned int pBusAddr;
++
++		if (g_cmaHandle)
++		{
++			PRINTK(KERN_ERR "memory has already been allocated (handle %d)\n", g_cmaHandle);
++			return -EINVAL;
++		}
++
++		PRINTK(KERN_INFO "allocating %ld bytes of VC memory\n", arg * 4096);
++
++		//get the memory
++		if (AllocateVcMemory(&g_cmaHandle, arg * 4096, 4096, MEM_FLAG_L1_NONALLOCATING | MEM_FLAG_NO_INIT | MEM_FLAG_HINT_PERMALOCK))
++		{
++			PRINTK(KERN_ERR "failed to allocate %ld bytes of VC memory\n", arg * 4096);
++			g_cmaHandle = 0;
++			return -EINVAL;
++		}
++
++		//get an address for it
++		PRINTK(KERN_INFO "trying to map VC memory\n");
++
++		if (LockVcMemory(&pBusAddr, g_cmaHandle))
++		{
++			PRINTK(KERN_ERR "failed to map CMA handle %d, releasing memory\n", g_cmaHandle);
++			ReleaseVcMemory(g_cmaHandle);
++			g_cmaHandle = 0;
++		}
++
++		PRINTK(KERN_INFO "bus address for CMA memory is %x\n", pBusAddr);
++		return pBusAddr;
++	}
++	case DMA_GET_VERSION:
++		PRINTK(KERN_DEBUG "returning version number, %d\n", VERSION_NUMBER);
++		return VERSION_NUMBER;
++	default:
++		PRINTK(KERN_DEBUG "unknown ioctl: %d\n", cmd);
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++static ssize_t Read(struct file *pFile, char __user *pUser, size_t count, loff_t *offp)
++{
++	return -EIO;
++}
++
++static int Mmap(struct file *pFile, struct vm_area_struct *pVma)
++{
++	struct PageList *pPages;
++	struct VmaPageList *pVmaList;
++
++	PRINTK_VERBOSE(KERN_DEBUG "MMAP vma %p, length %ld (%s %d)\n",
++		pVma, pVma->vm_end - pVma->vm_start,
++		current->comm, current->pid);
++	PRINTK_VERBOSE(KERN_DEBUG "MMAP %p %d (tracked %d)\n", pVma, current->pid, g_trackedPages);
++
++	//make a new page list
++	pPages = (struct PageList *)kmalloc(sizeof(struct PageList), GFP_KERNEL);
++	if (!pPages)
++	{
++		PRINTK(KERN_ERR "couldn\'t allocate a new page list (%s %d)\n",
++			current->comm, current->pid);
++		return -ENOMEM;
++	}
++
++	//clear the page list
++	pPages->m_used = 0;
++	pPages->m_pNext = 0;
++
++	//insert our vma and new page list somewhere
++	if (!pVma->vm_private_data)
++	{
++		struct VmaPageList *pList;
++
++		PRINTK_VERBOSE(KERN_DEBUG "new vma list, making new one (%s %d)\n",
++			current->comm, current->pid);
++
++		//make a new vma list
++		pList = (struct VmaPageList *)kmalloc(sizeof(struct VmaPageList), GFP_KERNEL);
++		if (!pList)
++		{
++			PRINTK(KERN_ERR "couldn\'t allocate vma page list (%s %d)\n",
++				current->comm, current->pid);
++			kfree(pPages);
++			return -ENOMEM;
++		}
++
++		//clear this list
++		pVma->vm_private_data = (void *)pList;
++		pList->m_refCount = 0;
++	}
++
++	pVmaList = (struct VmaPageList *)pVma->vm_private_data;
++
++	//add it to the vma list
++	pVmaList->m_pPageHead = pPages;
++	pVmaList->m_pPageTail = pPages;
++
++	pVma->vm_ops = &g_vmOps4k;
++	pVma->vm_flags |= VM_IO;
++
++	VmaOpen4k(pVma);
++
++	return 0;
++}
++
++/****** VMA OPERATIONS ******/
++
++static void VmaOpen4k(struct vm_area_struct *pVma)
++{
++	struct VmaPageList *pVmaList;
++
++	PRINTK_VERBOSE(KERN_DEBUG "vma open %p private %p (%s %d), %d live pages\n", pVma, pVma->vm_private_data, current->comm, current->pid, g_trackedPages);
++	PRINTK_VERBOSE(KERN_DEBUG "OPEN %p %d %ld pages (tracked pages %d)\n",
++		pVma, current->pid, (pVma->vm_end - pVma->vm_start) >> 12,
++		g_trackedPages);
++
++	pVmaList = (struct VmaPageList *)pVma->vm_private_data;
++
++	if (pVmaList)
++	{
++		pVmaList->m_refCount++;
++		PRINTK_VERBOSE(KERN_DEBUG "ref count is now %d\n", pVmaList->m_refCount);
++	}
++	else
++	{
++		PRINTK_VERBOSE(KERN_DEBUG "err, open but no vma page list\n");
++	}
++}
++
++static void VmaClose4k(struct vm_area_struct *pVma)
++{
++	struct VmaPageList *pVmaList;
++	int freed = 0;
++
++	PRINTK_VERBOSE(KERN_DEBUG "vma close %p private %p (%s %d)\n", pVma, pVma->vm_private_data, current->comm, current->pid);
++
++	//wait for any dmas to finish
++	DmaWaitAll();
++
++	//find our vma in the list
++	pVmaList = (struct VmaPageList *)pVma->vm_private_data;
++
++	//may be a fork
++	if (pVmaList)
++	{
++		struct PageList *pPages;
++
++		pVmaList->m_refCount--;
++
++		if (pVmaList->m_refCount == 0)
++		{
++			PRINTK_VERBOSE(KERN_DEBUG "found vma, freeing pages (%s %d)\n",
++				current->comm, current->pid);
++
++			pPages = pVmaList->m_pPageHead;
++
++			if (!pPages)
++			{
++				PRINTK(KERN_ERR "no page list (%s %d)!\n",
++					current->comm, current->pid);
++				return;
++			}
++
++			while (pPages)
++			{
++				struct PageList *next;
++				int count;
++
++				PRINTK_VERBOSE(KERN_DEBUG "page list (%s %d)\n",
++					current->comm, current->pid);
++
++				next = pPages->m_pNext;
++				for (count = 0; count < pPages->m_used; count++)
++				{
++					PRINTK_VERBOSE(KERN_DEBUG "freeing page %p (%s %d)\n",
++						pPages->m_pPages[count],
++						current->comm, current->pid);
++					__free_pages(pPages->m_pPages[count], 0);
++					g_trackedPages--;
++					freed++;
++				}
++
++				PRINTK_VERBOSE(KERN_DEBUG "freeing page list (%s %d)\n",
++					current->comm, current->pid);
++				kfree(pPages);
++				pPages = next;
++			}
++
++			//remove our vma from the list
++			kfree(pVmaList);
++			pVma->vm_private_data = 0;
++		}
++		else
++		{
++			PRINTK_VERBOSE(KERN_DEBUG "ref count is %d, not closing\n", pVmaList->m_refCount);
++		}
++	}
++	else
++	{
++		PRINTK_VERBOSE(KERN_ERR "uh-oh, vma %p not found (%s %d)!\n", pVma, current->comm, current->pid);
++		PRINTK_VERBOSE(KERN_ERR "CLOSE ERR\n");
++	}
++
++	PRINTK_VERBOSE(KERN_DEBUG "CLOSE %p %d %d pages (tracked pages %d)",
++		pVma, current->pid, freed, g_trackedPages);
++
++	PRINTK_VERBOSE(KERN_DEBUG "%d pages open\n", g_trackedPages);
++}
++
++static int VmaFault4k(struct vm_area_struct *pVma, struct vm_fault *pVmf)
++{
++	PRINTK_VERBOSE(KERN_DEBUG "vma fault for vma %p private %p at offset %ld (%s %d)\n", pVma, pVma->vm_private_data, pVmf->pgoff,
++		current->comm, current->pid);
++	PRINTK_VERBOSE(KERN_DEBUG "FAULT\n");
++	pVmf->page = alloc_page(GFP_KERNEL);
++
++	if (pVmf->page)
++	{
++		PRINTK_VERBOSE(KERN_DEBUG "alloc page virtual %p\n", page_address(pVmf->page));
++	}
++
++	if (!pVmf->page)
++	{
++		PRINTK(KERN_ERR "vma fault oom (%s %d)\n", current->comm, current->pid);
++		return VM_FAULT_OOM;
++	}
++	else
++	{
++		struct VmaPageList *pVmaList;
++
++		get_page(pVmf->page);
++		g_trackedPages++;
++
++		//find our vma in the list
++		pVmaList = (struct VmaPageList *)pVma->vm_private_data;
++
++		if (pVmaList)
++		{
++			PRINTK_VERBOSE(KERN_DEBUG "vma found (%s %d)\n", current->comm, current->pid);
++
++			if (pVmaList->m_pPageTail->m_used == PAGES_PER_LIST)
++			{
++				PRINTK_VERBOSE(KERN_DEBUG "making new page list (%s %d)\n", current->comm, current->pid);
++				//making a new page list
++				pVmaList->m_pPageTail->m_pNext = (struct PageList *)kmalloc(sizeof(struct PageList), GFP_KERNEL);
++				if (!pVmaList->m_pPageTail->m_pNext)
++					return -ENOMEM;
++
++				//update the tail pointer
++				pVmaList->m_pPageTail = pVmaList->m_pPageTail->m_pNext;
++				pVmaList->m_pPageTail->m_used = 0;
++				pVmaList->m_pPageTail->m_pNext = 0;
++			}
++
++			PRINTK_VERBOSE(KERN_DEBUG "adding page to list (%s %d)\n", current->comm, current->pid);
++
++			pVmaList->m_pPageTail->m_pPages[pVmaList->m_pPageTail->m_used] = pVmf->page;
++			pVmaList->m_pPageTail->m_used++;
++		}
++		else
++			PRINTK(KERN_ERR "returned page for vma we don\'t know %p (%s %d)\n", pVma, current->comm, current->pid);
++
++		return 0;
++	}
++}
++
++/****** GENERIC FUNCTIONS ******/
++static int __init dmaer_init(void)
++{
++	int result = alloc_chrdev_region(&g_majorMinor, 0, 1, "dmaer");
++	if (result < 0)
++	{
++		PRINTK(KERN_ERR "unable to get major device number\n");
++		return result;
++	}
++	else
++		PRINTK(KERN_DEBUG "major device number %d\n", MAJOR(g_majorMinor));
++
++	PRINTK(KERN_DEBUG "vma list size %d, page list size %d, page size %ld\n",
++		sizeof(struct VmaPageList), sizeof(struct PageList), PAGE_SIZE);
++
++	//get a dma channel to work with
++	result = bcm_dma_chan_alloc(BCM_DMA_FEATURE_FAST, (void **)&g_pDmaChanBase, &g_dmaIrq);
++
++	//uncomment to force to channel 0
++	//result = 0;
++	//g_pDmaChanBase = 0xce808000;
++
++	if (result < 0)
++	{
++		PRINTK(KERN_ERR "failed to allocate dma channel\n");
++		cdev_del(&g_cDev);
++		unregister_chrdev_region(g_majorMinor, 1);
++	}
++
++	//reset the channel
++	PRINTK(KERN_DEBUG "allocated dma channel %d (%p), initial state %08x\n", result, g_pDmaChanBase, *g_pDmaChanBase);
++	*g_pDmaChanBase = 1 << 31;
++	PRINTK(KERN_DEBUG "post-reset %08x\n", *g_pDmaChanBase);
++
++	g_dmaChan = result;
++
++	//clear the cache stats
++	g_cacheHit = 0;
++	g_cacheMiss = 0;
++
++	//register our device - after this we are go go go
++	cdev_init(&g_cDev, &g_fOps);
++	g_cDev.owner = THIS_MODULE;
++	g_cDev.ops = &g_fOps;
++
++	result = cdev_add(&g_cDev, g_majorMinor, 1);
++	if (result < 0)
++	{
++		PRINTK(KERN_ERR "failed to add character device\n");
++		unregister_chrdev_region(g_majorMinor, 1);
++		bcm_dma_chan_free(g_dmaChan);
++		return result;
++	}
++
++	return 0;
++}
++
++static void __exit dmaer_exit(void)
++{
++	PRINTK(KERN_INFO "closing dmaer device, cache stats: %d hits %d misses\n", g_cacheHit, g_cacheMiss);
++	//unregister the device
++	cdev_del(&g_cDev);
++	unregister_chrdev_region(g_majorMinor, 1);
++	//free the dma channel
++	bcm_dma_chan_free(g_dmaChan);
++}
++
++MODULE_LICENSE("Dual BSD/GPL");
++MODULE_AUTHOR("Simon Hall");
++module_init(dmaer_init);
++module_exit(dmaer_exit);
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/include/mach/arm_control.h linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/arm_control.h
+--- linux-3.12.6/arch/arm/mach-bcm2708/include/mach/arm_control.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/arm_control.h	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,419 @@
++/*
++ *  linux/arch/arm/mach-bcm2708/arm_control.h
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#ifndef __BCM2708_ARM_CONTROL_H
++#define __BCM2708_ARM_CONTROL_H
++
++/*
++ * Definitions and addresses for the ARM CONTROL logic
++ * This file is manually generated.
++ */
++
++#define ARM_BASE  0x7E00B000
++
++/* Basic configuration */
++#define ARM_CONTROL0  HW_REGISTER_RW(ARM_BASE+0x000)
++#define ARM_C0_SIZ128M   0x00000000
++#define ARM_C0_SIZ256M   0x00000001
++#define ARM_C0_SIZ512M   0x00000002
++#define ARM_C0_SIZ1G     0x00000003
++#define ARM_C0_BRESP0    0x00000000
++#define ARM_C0_BRESP1    0x00000004
++#define ARM_C0_BRESP2    0x00000008
++#define ARM_C0_BOOTHI    0x00000010
++#define ARM_C0_UNUSED05  0x00000020 /* free */
++#define ARM_C0_FULLPERI  0x00000040
++#define ARM_C0_UNUSED78  0x00000180 /* free */
++#define ARM_C0_JTAGMASK  0x00000E00
++#define ARM_C0_JTAGOFF   0x00000000
++#define ARM_C0_JTAGBASH  0x00000800 /* Debug on GPIO off */
++#define ARM_C0_JTAGGPIO  0x00000C00 /* Debug on GPIO on */
++#define ARM_C0_APROTMSK  0x0000F000
++#define ARM_C0_DBG0SYNC  0x00010000 /* VPU0 halt sync */
++#define ARM_C0_DBG1SYNC  0x00020000 /* VPU1 halt sync */
++#define ARM_C0_SWDBGREQ  0x00040000 /* HW debug request */
++#define ARM_C0_PASSHALT  0x00080000 /* ARM halt passed to debugger */
++#define ARM_C0_PRIO_PER  0x00F00000 /* per priority mask */
++#define ARM_C0_PRIO_L2   0x0F000000
++#define ARM_C0_PRIO_UC   0xF0000000
++
++#define ARM_C0_APROTPASS  0x0000A000 /* Translate 1:1 */
++#define ARM_C0_APROTUSER  0x00000000 /* Only user mode */
++#define ARM_C0_APROTSYST  0x0000F000 /* Only system mode */
++
++
++#define ARM_CONTROL1  HW_REGISTER_RW(ARM_BASE+0x440)
++#define ARM_C1_TIMER     0x00000001 /* re-route timer IRQ  to VC */
++#define ARM_C1_MAIL      0x00000002 /* re-route Mail IRQ   to VC */
++#define ARM_C1_BELL0     0x00000004 /* re-route Doorbell 0 to VC */
++#define ARM_C1_BELL1     0x00000008 /* re-route Doorbell 1 to VC */
++#define ARM_C1_PERSON    0x00000100 /* peripherals on */
++#define ARM_C1_REQSTOP   0x00000200 /* ASYNC bridge request stop */
++
++#define ARM_STATUS    HW_REGISTER_RW(ARM_BASE+0x444)
++#define ARM_S_ACKSTOP    0x80000000 /* Bridge stopped */
++#define ARM_S_READPEND   0x000003FF /* pending reads counter */
++#define ARM_S_WRITPEND   0x000FFC00 /* pending writes counter */
++
++#define ARM_ERRHALT   HW_REGISTER_RW(ARM_BASE+0x448)
++#define ARM_EH_PERIBURST  0x00000001 /* Burst write seen on peri bus */
++#define ARM_EH_ILLADDRS1  0x00000002 /* Address bits 25-27 error */
++#define ARM_EH_ILLADDRS2  0x00000004 /* Address bits 31-28 error */
++#define ARM_EH_VPU0HALT   0x00000008 /* VPU0 halted & in debug mode */
++#define ARM_EH_VPU1HALT   0x00000010 /* VPU1 halted & in debug mode */
++#define ARM_EH_ARMHALT    0x00000020 /* ARM in halted debug mode */
++
++#define ARM_ID_SECURE HW_REGISTER_RW(ARM_BASE+0x00C)
++#define ARM_ID        HW_REGISTER_RW(ARM_BASE+0x44C)
++#define ARM_IDVAL        0x364D5241
++
++/* Translation memory */
++#define ARM_TRANSLATE HW_REGISTER_RW(ARM_BASE+0x100)
++/* 32 locations: 0x100.. 0x17F */
++/* 32 spare means we CAN go to 64 pages.... */
++
++
++/* Interrupts */
++#define ARM_IRQ_PEND0 HW_REGISTER_RW(ARM_BASE+0x200)        /* Top IRQ bits */
++#define ARM_I0_TIMER    0x00000001 /* timer IRQ */
++#define ARM_I0_MAIL     0x00000002 /* Mail IRQ */
++#define ARM_I0_BELL0    0x00000004 /* Doorbell 0 */
++#define ARM_I0_BELL1    0x00000008 /* Doorbell 1 */
++#define ARM_I0_BANK1    0x00000100 /* Bank1 IRQ */
++#define ARM_I0_BANK2    0x00000200 /* Bank2 IRQ */
++
++#define ARM_IRQ_PEND1 HW_REGISTER_RW(ARM_BASE+0x204) /* All bank1 IRQ bits */
++/* todo: all I1_interrupt sources */
++#define ARM_IRQ_PEND2 HW_REGISTER_RW(ARM_BASE+0x208) /* All bank2 IRQ bits */
++/* todo: all I2_interrupt sources */
++
++#define ARM_IRQ_FAST  HW_REGISTER_RW(ARM_BASE+0x20C) /* FIQ control */
++#define ARM_IF_INDEX    0x0000007F     /* FIQ select */
++#define ARM_IF_ENABLE   0x00000080     /* FIQ enable */
++#define ARM_IF_VCMASK   0x0000003F     /* FIQ = (index from VC source) */
++#define ARM_IF_TIMER    0x00000040     /* FIQ = ARM timer */
++#define ARM_IF_MAIL     0x00000041     /* FIQ = ARM Mail */
++#define ARM_IF_BELL0    0x00000042     /* FIQ = ARM Doorbell 0 */
++#define ARM_IF_BELL1    0x00000043     /* FIQ = ARM Doorbell 1 */
++#define ARM_IF_VP0HALT  0x00000044     /* FIQ = VPU0 Halt seen */
++#define ARM_IF_VP1HALT  0x00000045     /* FIQ = VPU1 Halt seen */
++#define ARM_IF_ILLEGAL  0x00000046     /* FIQ = Illegal access seen */
++
++#define ARM_IRQ_ENBL1 HW_REGISTER_RW(ARM_BASE+0x210) /* Bank1 enable bits */
++#define ARM_IRQ_ENBL2 HW_REGISTER_RW(ARM_BASE+0x214) /* Bank2 enable bits */
++#define ARM_IRQ_ENBL3 HW_REGISTER_RW(ARM_BASE+0x218) /* ARM irqs enable bits */
++#define ARM_IRQ_DIBL1 HW_REGISTER_RW(ARM_BASE+0x21C) /* Bank1 disable bits */
++#define ARM_IRQ_DIBL2 HW_REGISTER_RW(ARM_BASE+0x220) /* Bank2 disable bits */
++#define ARM_IRQ_DIBL3 HW_REGISTER_RW(ARM_BASE+0x224) /* ARM irqs disable bits */
++#define ARM_IE_TIMER    0x00000001     /* Timer IRQ */
++#define ARM_IE_MAIL     0x00000002     /* Mail IRQ */
++#define ARM_IE_BELL0    0x00000004     /* Doorbell 0 */
++#define ARM_IE_BELL1    0x00000008     /* Doorbell 1 */
++#define ARM_IE_VP0HALT  0x00000010     /* VPU0 Halt */
++#define ARM_IE_VP1HALT  0x00000020     /* VPU1 Halt */
++#define ARM_IE_ILLEGAL  0x00000040     /* Illegal access seen */
++
++/* Timer */
++/* For reg. fields see sp804 spec. */
++#define ARM_T_LOAD    HW_REGISTER_RW(ARM_BASE+0x400)
++#define ARM_T_VALUE   HW_REGISTER_RW(ARM_BASE+0x404)
++#define ARM_T_CONTROL HW_REGISTER_RW(ARM_BASE+0x408)
++#define ARM_T_IRQCNTL HW_REGISTER_RW(ARM_BASE+0x40C)
++#define ARM_T_RAWIRQ  HW_REGISTER_RW(ARM_BASE+0x410)
++#define ARM_T_MSKIRQ  HW_REGISTER_RW(ARM_BASE+0x414)
++#define ARM_T_RELOAD  HW_REGISTER_RW(ARM_BASE+0x418)
++#define ARM_T_PREDIV  HW_REGISTER_RW(ARM_BASE+0x41c)
++#define ARM_T_FREECNT HW_REGISTER_RW(ARM_BASE+0x420)
++
++#define TIMER_CTRL_ONESHOT  (1 << 0)
++#define TIMER_CTRL_32BIT    (1 << 1)
++#define TIMER_CTRL_DIV1     (0 << 2)
++#define TIMER_CTRL_DIV16    (1 << 2)
++#define TIMER_CTRL_DIV256   (2 << 2)
++#define TIMER_CTRL_IE       (1 << 5)
++#define TIMER_CTRL_PERIODIC (1 << 6)
++#define TIMER_CTRL_ENABLE   (1 << 7)
++#define TIMER_CTRL_DBGHALT  (1 << 8)
++#define TIMER_CTRL_ENAFREE  (1 << 9)
++#define TIMER_CTRL_FREEDIV_SHIFT 16)
++#define TIMER_CTRL_FREEDIV_MASK  0xff
++
++/* Semaphores, Doorbells, Mailboxes */
++#define ARM_SBM_OWN0  (ARM_BASE+0x800)
++#define ARM_SBM_OWN1  (ARM_BASE+0x900)
++#define ARM_SBM_OWN2  (ARM_BASE+0xA00)
++#define ARM_SBM_OWN3  (ARM_BASE+0xB00)
++
++/* MAILBOXES
++ * Register flags are common across all
++ * owner registers. See end of this section
++ *
++ * Semaphores, Doorbells, Mailboxes Owner 0
++ *
++ */
++
++#define ARM_0_SEMS       HW_REGISTER_RW(ARM_SBM_OWN0+0x00)
++#define ARM_0_SEM0       HW_REGISTER_RW(ARM_SBM_OWN0+0x00)
++#define ARM_0_SEM1       HW_REGISTER_RW(ARM_SBM_OWN0+0x04)
++#define ARM_0_SEM2       HW_REGISTER_RW(ARM_SBM_OWN0+0x08)
++#define ARM_0_SEM3       HW_REGISTER_RW(ARM_SBM_OWN0+0x0C)
++#define ARM_0_SEM4       HW_REGISTER_RW(ARM_SBM_OWN0+0x10)
++#define ARM_0_SEM5       HW_REGISTER_RW(ARM_SBM_OWN0+0x14)
++#define ARM_0_SEM6       HW_REGISTER_RW(ARM_SBM_OWN0+0x18)
++#define ARM_0_SEM7       HW_REGISTER_RW(ARM_SBM_OWN0+0x1C)
++#define ARM_0_BELL0      HW_REGISTER_RW(ARM_SBM_OWN0+0x40)
++#define ARM_0_BELL1      HW_REGISTER_RW(ARM_SBM_OWN0+0x44)
++#define ARM_0_BELL2      HW_REGISTER_RW(ARM_SBM_OWN0+0x48)
++#define ARM_0_BELL3      HW_REGISTER_RW(ARM_SBM_OWN0+0x4C)
++/* MAILBOX 0 access in Owner 0 area */
++/* Some addresses should ONLY be used by owner 0 */
++#define ARM_0_MAIL0_WRT  HW_REGISTER_RW(ARM_SBM_OWN0+0x80)  /* .. 0x8C (4 locations) */
++#define ARM_0_MAIL0_RD   HW_REGISTER_RW(ARM_SBM_OWN0+0x80)  /* .. 0x8C (4 locations) Normal read */
++#define ARM_0_MAIL0_POL  HW_REGISTER_RW(ARM_SBM_OWN0+0x90)  /* none-pop read */
++#define ARM_0_MAIL0_SND  HW_REGISTER_RW(ARM_SBM_OWN0+0x94)  /* Sender read (only LS 2 bits) */
++#define ARM_0_MAIL0_STA  HW_REGISTER_RW(ARM_SBM_OWN0+0x98)  /* Status read */
++#define ARM_0_MAIL0_CNF  HW_REGISTER_RW(ARM_SBM_OWN0+0x9C)  /* Config read/write */
++/* MAILBOX 1 access in Owner 0 area */
++/* Owner 0 should only WRITE to this mailbox */
++#define ARM_0_MAIL1_WRT  HW_REGISTER_RW(ARM_SBM_OWN0+0xA0)   /* .. 0xAC (4 locations) */
++/*#define ARM_0_MAIL1_RD   HW_REGISTER_RW(ARM_SBM_OWN0+0xA0) */ /* DO NOT USE THIS !!!!! */
++/*#define ARM_0_MAIL1_POL  HW_REGISTER_RW(ARM_SBM_OWN0+0xB0) */ /* DO NOT USE THIS !!!!! */
++/*#define ARM_0_MAIL1_SND  HW_REGISTER_RW(ARM_SBM_OWN0+0xB4) */ /* DO NOT USE THIS !!!!! */
++#define ARM_0_MAIL1_STA  HW_REGISTER_RW(ARM_SBM_OWN0+0xB8)   /* Status read */
++/*#define ARM_0_MAIL1_CNF  HW_REGISTER_RW(ARM_SBM_OWN0+0xBC) */ /* DO NOT USE THIS !!!!! */
++/* General SEM, BELL, MAIL config/status */
++#define ARM_0_SEMCLRDBG   HW_REGISTER_RW(ARM_SBM_OWN0+0xE0)  /* semaphore clear/debug register */
++#define ARM_0_BELLCLRDBG  HW_REGISTER_RW(ARM_SBM_OWN0+0xE4)  /* Doorbells clear/debug register */
++#define ARM_0_ALL_IRQS    HW_REGISTER_RW(ARM_SBM_OWN0+0xF8)  /* ALL interrupts */
++#define ARM_0_MY_IRQS     HW_REGISTER_RW(ARM_SBM_OWN0+0xFC)  /* IRQS pending for owner 0 */
++
++/* Semaphores, Doorbells, Mailboxes Owner 1 */
++#define ARM_1_SEMS       HW_REGISTER_RW(ARM_SBM_OWN1+0x00)
++#define ARM_1_SEM0       HW_REGISTER_RW(ARM_SBM_OWN1+0x00)
++#define ARM_1_SEM1       HW_REGISTER_RW(ARM_SBM_OWN1+0x04)
++#define ARM_1_SEM2       HW_REGISTER_RW(ARM_SBM_OWN1+0x08)
++#define ARM_1_SEM3       HW_REGISTER_RW(ARM_SBM_OWN1+0x0C)
++#define ARM_1_SEM4       HW_REGISTER_RW(ARM_SBM_OWN1+0x10)
++#define ARM_1_SEM5       HW_REGISTER_RW(ARM_SBM_OWN1+0x14)
++#define ARM_1_SEM6       HW_REGISTER_RW(ARM_SBM_OWN1+0x18)
++#define ARM_1_SEM7       HW_REGISTER_RW(ARM_SBM_OWN1+0x1C)
++#define ARM_1_BELL0      HW_REGISTER_RW(ARM_SBM_OWN1+0x40)
++#define ARM_1_BELL1      HW_REGISTER_RW(ARM_SBM_OWN1+0x44)
++#define ARM_1_BELL2      HW_REGISTER_RW(ARM_SBM_OWN1+0x48)
++#define ARM_1_BELL3      HW_REGISTER_RW(ARM_SBM_OWN1+0x4C)
++/* MAILBOX 0 access in Owner 0 area */
++/* Owner 1 should only WRITE to this mailbox */
++#define ARM_1_MAIL0_WRT  HW_REGISTER_RW(ARM_SBM_OWN1+0x80)  /* .. 0x8C (4 locations) */
++/*#define ARM_1_MAIL0_RD  HW_REGISTER_RW(ARM_SBM_OWN1+0x80) */ /* DO NOT USE THIS !!!!! */
++/*#define ARM_1_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN1+0x90) */ /* DO NOT USE THIS !!!!! */
++/*#define ARM_1_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN1+0x94) */ /* DO NOT USE THIS !!!!! */
++#define ARM_1_MAIL0_STA  HW_REGISTER_RW(ARM_SBM_OWN1+0x98)  /* Status read */
++/*#define ARM_1_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN1+0x9C) */ /* DO NOT USE THIS !!!!! */
++/* MAILBOX 1 access in Owner 0 area */
++#define ARM_1_MAIL1_WRT  HW_REGISTER_RW(ARM_SBM_OWN1+0xA0)  /* .. 0xAC (4 locations) */
++#define ARM_1_MAIL1_RD   HW_REGISTER_RW(ARM_SBM_OWN1+0xA0)  /* .. 0xAC (4 locations) Normal read */
++#define ARM_1_MAIL1_POL  HW_REGISTER_RW(ARM_SBM_OWN1+0xB0)  /* none-pop read */
++#define ARM_1_MAIL1_SND  HW_REGISTER_RW(ARM_SBM_OWN1+0xB4)  /* Sender read (only LS 2 bits) */
++#define ARM_1_MAIL1_STA  HW_REGISTER_RW(ARM_SBM_OWN1+0xB8)  /* Status read */
++#define ARM_1_MAIL1_CNF  HW_REGISTER_RW(ARM_SBM_OWN1+0xBC)
++/* General SEM, BELL, MAIL config/status */
++#define ARM_1_SEMCLRDBG   HW_REGISTER_RW(ARM_SBM_OWN1+0xE0)  /* semaphore clear/debug register */
++#define ARM_1_BELLCLRDBG  HW_REGISTER_RW(ARM_SBM_OWN1+0xE4)  /* Doorbells clear/debug register */
++#define ARM_1_MY_IRQS     HW_REGISTER_RW(ARM_SBM_OWN1+0xFC)  /* IRQS pending for owner 1 */
++#define ARM_1_ALL_IRQS    HW_REGISTER_RW(ARM_SBM_OWN1+0xF8)  /* ALL interrupts */
++
++/* Semaphores, Doorbells, Mailboxes Owner 2 */
++#define ARM_2_SEMS       HW_REGISTER_RW(ARM_SBM_OWN2+0x00)
++#define ARM_2_SEM0       HW_REGISTER_RW(ARM_SBM_OWN2+0x00)
++#define ARM_2_SEM1       HW_REGISTER_RW(ARM_SBM_OWN2+0x04)
++#define ARM_2_SEM2       HW_REGISTER_RW(ARM_SBM_OWN2+0x08)
++#define ARM_2_SEM3       HW_REGISTER_RW(ARM_SBM_OWN2+0x0C)
++#define ARM_2_SEM4       HW_REGISTER_RW(ARM_SBM_OWN2+0x10)
++#define ARM_2_SEM5       HW_REGISTER_RW(ARM_SBM_OWN2+0x14)
++#define ARM_2_SEM6       HW_REGISTER_RW(ARM_SBM_OWN2+0x18)
++#define ARM_2_SEM7       HW_REGISTER_RW(ARM_SBM_OWN2+0x1C)
++#define ARM_2_BELL0      HW_REGISTER_RW(ARM_SBM_OWN2+0x40)
++#define ARM_2_BELL1      HW_REGISTER_RW(ARM_SBM_OWN2+0x44)
++#define ARM_2_BELL2      HW_REGISTER_RW(ARM_SBM_OWN2+0x48)
++#define ARM_2_BELL3      HW_REGISTER_RW(ARM_SBM_OWN2+0x4C)
++/* MAILBOX 0 access in Owner 2 area */
++/* Owner 2 should only WRITE to this mailbox */
++#define ARM_2_MAIL0_WRT  HW_REGISTER_RW(ARM_SBM_OWN2+0x80)   /* .. 0x8C (4 locations) */
++/*#define ARM_2_MAIL0_RD  HW_REGISTER_RW(ARM_SBM_OWN2+0x80)  */ /* DO NOT USE THIS !!!!! */
++/*#define ARM_2_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN2+0x90)  */ /* DO NOT USE THIS !!!!! */
++/*#define ARM_2_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN2+0x94)  */ /* DO NOT USE THIS !!!!! */
++#define ARM_2_MAIL0_STA  HW_REGISTER_RW(ARM_SBM_OWN2+0x98)   /* Status read */
++/*#define ARM_2_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN2+0x9C)  */ /* DO NOT USE THIS !!!!! */
++/* MAILBOX 1 access in Owner 2 area */
++/* Owner 2 should only WRITE to this mailbox */
++#define ARM_2_MAIL1_WRT  HW_REGISTER_RW(ARM_SBM_OWN2+0xA0)   /* .. 0xAC (4 locations) */
++/*#define ARM_2_MAIL1_RD   HW_REGISTER_RW(ARM_SBM_OWN2+0xA0) */ /* DO NOT USE THIS !!!!! */
++/*#define ARM_2_MAIL1_POL  HW_REGISTER_RW(ARM_SBM_OWN2+0xB0) */ /* DO NOT USE THIS !!!!! */
++/*#define ARM_2_MAIL1_SND  HW_REGISTER_RW(ARM_SBM_OWN2+0xB4) */ /* DO NOT USE THIS !!!!! */
++#define ARM_2_MAIL1_STA  HW_REGISTER_RW(ARM_SBM_OWN2+0xB8)   /* Status read */
++/*#define ARM_2_MAIL1_CNF  HW_REGISTER_RW(ARM_SBM_OWN2+0xBC) */ /* DO NOT USE THIS !!!!! */
++/* General SEM, BELL, MAIL config/status */
++#define ARM_2_SEMCLRDBG   HW_REGISTER_RW(ARM_SBM_OWN2+0xE0)  /* semaphore clear/debug register */
++#define ARM_2_BELLCLRDBG  HW_REGISTER_RW(ARM_SBM_OWN2+0xE4)  /* Doorbells clear/debug register */
++#define ARM_2_MY_IRQS     HW_REGISTER_RW(ARM_SBM_OWN2+0xFC)  /* IRQS pending for owner 2 */
++#define ARM_2_ALL_IRQS    HW_REGISTER_RW(ARM_SBM_OWN2+0xF8)  /* ALL interrupts */
++
++/* Semaphores, Doorbells, Mailboxes Owner 3 */
++#define ARM_3_SEMS       HW_REGISTER_RW(ARM_SBM_OWN3+0x00)
++#define ARM_3_SEM0       HW_REGISTER_RW(ARM_SBM_OWN3+0x00)
++#define ARM_3_SEM1       HW_REGISTER_RW(ARM_SBM_OWN3+0x04)
++#define ARM_3_SEM2       HW_REGISTER_RW(ARM_SBM_OWN3+0x08)
++#define ARM_3_SEM3       HW_REGISTER_RW(ARM_SBM_OWN3+0x0C)
++#define ARM_3_SEM4       HW_REGISTER_RW(ARM_SBM_OWN3+0x10)
++#define ARM_3_SEM5       HW_REGISTER_RW(ARM_SBM_OWN3+0x14)
++#define ARM_3_SEM6       HW_REGISTER_RW(ARM_SBM_OWN3+0x18)
++#define ARM_3_SEM7       HW_REGISTER_RW(ARM_SBM_OWN3+0x1C)
++#define ARM_3_BELL0      HW_REGISTER_RW(ARM_SBM_OWN3+0x40)
++#define ARM_3_BELL1      HW_REGISTER_RW(ARM_SBM_OWN3+0x44)
++#define ARM_3_BELL2      HW_REGISTER_RW(ARM_SBM_OWN3+0x48)
++#define ARM_3_BELL3      HW_REGISTER_RW(ARM_SBM_OWN3+0x4C)
++/* MAILBOX 0 access in Owner 3 area */
++/* Owner 3 should only WRITE to this mailbox */
++#define ARM_3_MAIL0_WRT  HW_REGISTER_RW(ARM_SBM_OWN3+0x80)   /* .. 0x8C (4 locations) */
++/*#define ARM_3_MAIL0_RD  HW_REGISTER_RW(ARM_SBM_OWN3+0x80)  */ /* DO NOT USE THIS !!!!! */
++/*#define ARM_3_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN3+0x90)  */ /* DO NOT USE THIS !!!!! */
++/*#define ARM_3_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN3+0x94)  */ /* DO NOT USE THIS !!!!! */
++#define ARM_3_MAIL0_STA HW_REGISTER_RW(ARM_SBM_OWN3+0x98)    /* Status read */
++/*#define ARM_3_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN3+0x9C)  */ /* DO NOT USE THIS !!!!! */
++/* MAILBOX 1 access in Owner 3 area */
++/* Owner 3 should only WRITE to this mailbox */
++#define ARM_3_MAIL1_WRT  HW_REGISTER_RW(ARM_SBM_OWN3+0xA0)   /* .. 0xAC (4 locations) */
++/*#define ARM_3_MAIL1_RD   HW_REGISTER_RW(ARM_SBM_OWN3+0xA0) */ /* DO NOT USE THIS !!!!! */
++/*#define ARM_3_MAIL1_POL  HW_REGISTER_RW(ARM_SBM_OWN3+0xB0) */ /* DO NOT USE THIS !!!!! */
++/*#define ARM_3_MAIL1_SND  HW_REGISTER_RW(ARM_SBM_OWN3+0xB4) */ /* DO NOT USE THIS !!!!! */
++#define ARM_3_MAIL1_STA  HW_REGISTER_RW(ARM_SBM_OWN3+0xB8)   /* Status read */
++/*#define ARM_3_MAIL1_CNF  HW_REGISTER_RW(ARM_SBM_OWN3+0xBC) */ /* DO NOT USE THIS !!!!! */
++/* General SEM, BELL, MAIL config/status */
++#define ARM_3_SEMCLRDBG   HW_REGISTER_RW(ARM_SBM_OWN3+0xE0)  /* semaphore clear/debug register */
++#define ARM_3_BELLCLRDBG  HW_REGISTER_RW(ARM_SBM_OWN3+0xE4)  /* Doorbells clear/debug register */
++#define ARM_3_MY_IRQS     HW_REGISTER_RW(ARM_SBM_OWN3+0xFC)  /* IRQS pending for owner 3 */
++#define ARM_3_ALL_IRQS    HW_REGISTER_RW(ARM_SBM_OWN3+0xF8)  /* ALL interrupts */
++
++
++
++/*  Mailbox flags. Valid for all owners */
++
++/* Mailbox status register (...0x98) */
++#define ARM_MS_FULL       0x80000000
++#define ARM_MS_EMPTY      0x40000000
++#define ARM_MS_LEVEL      0x400000FF /* Max. value depdnds on mailbox depth parameter */
++
++/* MAILBOX config/status register (...0x9C) */
++/* ANY write to this register clears the error bits! */
++#define ARM_MC_IHAVEDATAIRQEN    0x00000001 /* mailbox irq enable:  has data */
++#define ARM_MC_IHAVESPACEIRQEN   0x00000002 /* mailbox irq enable:  has space */
++#define ARM_MC_OPPISEMPTYIRQEN   0x00000004 /* mailbox irq enable: Opp. is empty */
++#define ARM_MC_MAIL_CLEAR        0x00000008 /* mailbox clear write 1, then  0 */
++#define ARM_MC_IHAVEDATAIRQPEND  0x00000010 /* mailbox irq pending:  has space */
++#define ARM_MC_IHAVESPACEIRQPEND 0x00000020 /* mailbox irq pending: Opp. is empty */
++#define ARM_MC_OPPISEMPTYIRQPEND 0x00000040 /* mailbox irq pending */
++/* Bit 7 is unused */
++#define ARM_MC_ERRNOOWN   0x00000100 /* error : none owner read from mailbox */
++#define ARM_MC_ERROVERFLW 0x00000200 /* error : write to fill mailbox */
++#define ARM_MC_ERRUNDRFLW 0x00000400 /* error : read from empty mailbox */
++
++/* Semaphore clear/debug register (...0xE0) */
++#define ARM_SD_OWN0      0x00000003  /* Owner of sem 0 */
++#define ARM_SD_OWN1      0x0000000C  /* Owner of sem 1 */
++#define ARM_SD_OWN2      0x00000030  /* Owner of sem 2 */
++#define ARM_SD_OWN3      0x000000C0  /* Owner of sem 3 */
++#define ARM_SD_OWN4      0x00000300  /* Owner of sem 4 */
++#define ARM_SD_OWN5      0x00000C00  /* Owner of sem 5 */
++#define ARM_SD_OWN6      0x00003000  /* Owner of sem 6 */
++#define ARM_SD_OWN7      0x0000C000  /* Owner of sem 7 */
++#define ARM_SD_SEM0      0x00010000  /* Status of sem 0 */
++#define ARM_SD_SEM1      0x00020000  /* Status of sem 1 */
++#define ARM_SD_SEM2      0x00040000  /* Status of sem 2 */
++#define ARM_SD_SEM3      0x00080000  /* Status of sem 3 */
++#define ARM_SD_SEM4      0x00100000  /* Status of sem 4 */
++#define ARM_SD_SEM5      0x00200000  /* Status of sem 5 */
++#define ARM_SD_SEM6      0x00400000  /* Status of sem 6 */
++#define ARM_SD_SEM7      0x00800000  /* Status of sem 7 */
++
++/* Doorbells clear/debug register (...0xE4) */
++#define ARM_BD_OWN0      0x00000003  /* Owner of doorbell 0 */
++#define ARM_BD_OWN1      0x0000000C  /* Owner of doorbell 1 */
++#define ARM_BD_OWN2      0x00000030  /* Owner of doorbell 2 */
++#define ARM_BD_OWN3      0x000000C0  /* Owner of doorbell 3 */
++#define ARM_BD_BELL0     0x00000100  /* Status of doorbell 0 */
++#define ARM_BD_BELL1     0x00000200  /* Status of doorbell 1 */
++#define ARM_BD_BELL2     0x00000400  /* Status of doorbell 2 */
++#define ARM_BD_BELL3     0x00000800  /* Status of doorbell 3 */
++
++/* MY IRQS register (...0xF8) */
++#define ARM_MYIRQ_BELL   0x00000001  /* This owner has a doorbell IRQ */
++#define ARM_MYIRQ_MAIL   0x00000002  /* This owner has a mailbox  IRQ */
++
++/* ALL IRQS register (...0xF8) */
++#define ARM_AIS_BELL0 0x00000001  /* Doorbell 0 IRQ pending */
++#define ARM_AIS_BELL1 0x00000002  /* Doorbell 1 IRQ pending */
++#define ARM_AIS_BELL2 0x00000004  /* Doorbell 2 IRQ pending */
++#define ARM_AIS_BELL3 0x00000008  /* Doorbell 3 IRQ pending */
++#define ARM_AIS0_HAVEDATA 0x00000010  /* MAIL 0 has data IRQ pending */
++#define ARM_AIS0_HAVESPAC 0x00000020  /* MAIL 0 has space IRQ pending */
++#define ARM_AIS0_OPPEMPTY 0x00000040  /* MAIL 0 opposite is empty IRQ */
++#define ARM_AIS1_HAVEDATA 0x00000080  /* MAIL 1 has data IRQ pending */
++#define ARM_AIS1_HAVESPAC 0x00000100  /* MAIL 1 has space IRQ pending */
++#define ARM_AIS1_OPPEMPTY 0x00000200  /* MAIL 1 opposite is empty IRQ */
++/* Note   that bell-0, bell-1 and MAIL0 IRQ go only to the ARM */
++/* Whilst that bell-2, bell-3 and MAIL1 IRQ go only to the VC */
++/* */
++/* ARM JTAG BASH */
++/* */
++#define AJB_BASE 0x7e2000c0
++
++#define AJBCONF HW_REGISTER_RW(AJB_BASE+0x00)
++#define   AJB_BITS0    0x000000
++#define   AJB_BITS4    0x000004
++#define   AJB_BITS8    0x000008
++#define   AJB_BITS12   0x00000C
++#define   AJB_BITS16   0x000010
++#define   AJB_BITS20   0x000014
++#define   AJB_BITS24   0x000018
++#define   AJB_BITS28   0x00001C
++#define   AJB_BITS32   0x000020
++#define   AJB_BITS34   0x000022
++#define   AJB_OUT_MS   0x000040
++#define   AJB_OUT_LS   0x000000
++#define   AJB_INV_CLK  0x000080
++#define   AJB_D0_RISE  0x000100
++#define   AJB_D0_FALL  0x000000
++#define   AJB_D1_RISE  0x000200
++#define   AJB_D1_FALL  0x000000
++#define   AJB_IN_RISE  0x000400
++#define   AJB_IN_FALL  0x000000
++#define   AJB_ENABLE   0x000800
++#define   AJB_HOLD0    0x000000
++#define   AJB_HOLD1    0x001000
++#define   AJB_HOLD2    0x002000
++#define   AJB_HOLD3    0x003000
++#define   AJB_RESETN   0x004000
++#define   AJB_CLKSHFT  16
++#define   AJB_BUSY     0x80000000
++#define AJBTMS HW_REGISTER_RW(AJB_BASE+0x04)
++#define AJBTDI HW_REGISTER_RW(AJB_BASE+0x08)
++#define AJBTDO HW_REGISTER_RW(AJB_BASE+0x0c)
++
++#endif
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/include/mach/arm_power.h linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/arm_power.h
+--- linux-3.12.6/arch/arm/mach-bcm2708/include/mach/arm_power.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/arm_power.h	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,60 @@
++/*
++ *  linux/arch/arm/mach-bcm2708/include/mach/arm_power.h
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#ifndef _ARM_POWER_H
++#define _ARM_POWER_H
++
++/* Use meaningful names on each side */
++#ifdef __VIDEOCORE__
++#define PREFIX(x) ARM_##x
++#else
++#define PREFIX(x) BCM_##x
++#endif
++
++enum {
++	PREFIX(POWER_SDCARD_BIT),
++	PREFIX(POWER_UART_BIT),
++	PREFIX(POWER_MINIUART_BIT),
++	PREFIX(POWER_USB_BIT),
++	PREFIX(POWER_I2C0_BIT),
++	PREFIX(POWER_I2C1_BIT),
++	PREFIX(POWER_I2C2_BIT),
++	PREFIX(POWER_SPI_BIT),
++	PREFIX(POWER_CCP2TX_BIT),
++
++	PREFIX(POWER_MAX)
++};
++
++enum {
++	PREFIX(POWER_SDCARD) = (1 << PREFIX(POWER_SDCARD_BIT)),
++	PREFIX(POWER_UART) = (1 << PREFIX(POWER_UART_BIT)),
++	PREFIX(POWER_MINIUART) = (1 << PREFIX(POWER_MINIUART_BIT)),
++	PREFIX(POWER_USB) = (1 << PREFIX(POWER_USB_BIT)),
++	PREFIX(POWER_I2C0) = (1 << PREFIX(POWER_I2C0_BIT)),
++	PREFIX(POWER_I2C1_MASK) = (1 << PREFIX(POWER_I2C1_BIT)),
++	PREFIX(POWER_I2C2_MASK) = (1 << PREFIX(POWER_I2C2_BIT)),
++	PREFIX(POWER_SPI_MASK) = (1 << PREFIX(POWER_SPI_BIT)),
++	PREFIX(POWER_CCP2TX_MASK) = (1 << PREFIX(POWER_CCP2TX_BIT)),
++
++	PREFIX(POWER_MASK) = (1 << PREFIX(POWER_MAX)) - 1,
++	PREFIX(POWER_NONE) = 0
++};
++
++#endif
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/include/mach/clkdev.h linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/clkdev.h
+--- linux-3.12.6/arch/arm/mach-bcm2708/include/mach/clkdev.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/clkdev.h	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,7 @@
++#ifndef __ASM_MACH_CLKDEV_H
++#define __ASM_MACH_CLKDEV_H
++
++#define __clk_get(clk) ({ 1; })
++#define __clk_put(clk) do { } while (0)
++
++#endif
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/include/mach/debug-macro.S linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/debug-macro.S
+--- linux-3.12.6/arch/arm/mach-bcm2708/include/mach/debug-macro.S	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/debug-macro.S	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,22 @@
++/* arch/arm/mach-bcm2708/include/mach/debug-macro.S
++ *
++ * Debugging macro include header
++ *
++ *  Copyright (C) 2010 Broadcom
++ *  Copyright (C) 1994-1999 Russell King
++ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++*/
++
++#include <mach/platform.h>
++
++		.macro	addruart, rp, rv, tmp
++		ldr	\rp, =UART0_BASE
++		ldr	\rv, =IO_ADDRESS(UART0_BASE)
++		.endm
++
++#include <debug/pl01x.S>
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/include/mach/dma.h linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/dma.h
+--- linux-3.12.6/arch/arm/mach-bcm2708/include/mach/dma.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/dma.h	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,88 @@
++/*
++ *  linux/arch/arm/mach-bcm2708/include/mach/dma.h
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++
++#ifndef _MACH_BCM2708_DMA_H
++#define _MACH_BCM2708_DMA_H
++
++#define BCM_DMAMAN_DRIVER_NAME "bcm2708_dma"
++
++/* DMA CS Control and Status bits */
++#define BCM2708_DMA_ACTIVE	(1 << 0)
++#define BCM2708_DMA_INT		(1 << 2)
++#define BCM2708_DMA_ISPAUSED	(1 << 4)  /* Pause requested or not active */
++#define BCM2708_DMA_ISHELD	(1 << 5)  /* Is held by DREQ flow control */
++#define BCM2708_DMA_ERR		(1 << 8)
++#define BCM2708_DMA_ABORT	(1 << 30) /* stop current CB, go to next, WO */
++#define BCM2708_DMA_RESET	(1 << 31) /* WO, self clearing */
++
++/* DMA control block "info" field bits */
++#define BCM2708_DMA_INT_EN	(1 << 0)
++#define BCM2708_DMA_TDMODE	(1 << 1)
++#define BCM2708_DMA_WAIT_RESP	(1 << 3)
++#define BCM2708_DMA_D_INC	(1 << 4)
++#define BCM2708_DMA_D_WIDTH	(1 << 5)
++#define BCM2708_DMA_D_DREQ	(1 << 6)
++#define BCM2708_DMA_S_INC	(1 << 8)
++#define BCM2708_DMA_S_WIDTH	(1 << 9)
++#define BCM2708_DMA_S_DREQ	(1 << 10)
++
++#define	BCM2708_DMA_BURST(x)	(((x)&0xf) << 12)
++#define	BCM2708_DMA_PER_MAP(x)	((x) << 16)
++#define	BCM2708_DMA_WAITS(x)	(((x)&0x1f) << 21)
++
++#define BCM2708_DMA_DREQ_EMMC	11
++#define BCM2708_DMA_DREQ_SDHOST	13
++
++#define BCM2708_DMA_CS		0x00 /* Control and Status */
++#define BCM2708_DMA_ADDR	0x04
++/* the current control block appears in the following registers - read only */
++#define BCM2708_DMA_INFO	0x08
++#define BCM2708_DMA_SOURCE_AD	0x0c
++#define BCM2708_DMA_DEST_AD	0x10
++#define BCM2708_DMA_NEXTCB	0x1C
++#define BCM2708_DMA_DEBUG	0x20
++
++#define BCM2708_DMA4_CS		(BCM2708_DMA_CHAN(4)+BCM2708_DMA_CS)
++#define BCM2708_DMA4_ADDR	(BCM2708_DMA_CHAN(4)+BCM2708_DMA_ADDR)
++
++#define BCM2708_DMA_TDMODE_LEN(w, h) ((h) << 16 | (w))
++
++struct bcm2708_dma_cb {
++	unsigned long info;
++	unsigned long src;
++	unsigned long dst;
++	unsigned long length;
++	unsigned long stride;
++	unsigned long next;
++	unsigned long pad[2];
++};
++
++extern int bcm_sg_suitable_for_dma(struct scatterlist *sg_ptr, int sg_len);
++extern void bcm_dma_start(void __iomem *dma_chan_base,
++			  dma_addr_t control_block);
++extern void bcm_dma_wait_idle(void __iomem *dma_chan_base);
++extern int /*rc*/ bcm_dma_abort(void __iomem *dma_chan_base);
++
++/* When listing features we can ask for when allocating DMA channels give
++   those with higher priority smaller ordinal numbers */
++#define BCM_DMA_FEATURE_FAST_ORD 0
++#define BCM_DMA_FEATURE_BULK_ORD 1
++#define BCM_DMA_FEATURE_FAST	 (1<<BCM_DMA_FEATURE_FAST_ORD)
++#define BCM_DMA_FEATURE_BULK	 (1<<BCM_DMA_FEATURE_BULK_ORD)
++#define BCM_DMA_FEATURE_COUNT	 2
++
++/* return channel no or -ve error */
++extern int bcm_dma_chan_alloc(unsigned preferred_feature_set,
++			      void __iomem **out_dma_base, int *out_dma_irq);
++extern int bcm_dma_chan_free(int channel);
++
++
++#endif /* _MACH_BCM2708_DMA_H */
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/include/mach/entry-macro.S linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/entry-macro.S
+--- linux-3.12.6/arch/arm/mach-bcm2708/include/mach/entry-macro.S	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/entry-macro.S	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,69 @@
++/*
++ * arch/arm/mach-bcm2708/include/mach/entry-macro.S
++ *
++ * Low-level IRQ helper macros for BCM2708 platforms
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++#include <mach/hardware.h>
++
++		.macro	disable_fiq
++		.endm
++
++		.macro  get_irqnr_preamble, base, tmp
++		ldr	\base, =IO_ADDRESS(ARMCTRL_IC_BASE)
++		.endm
++
++		.macro  arch_ret_to_user, tmp1, tmp2
++		.endm
++
++		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
++		/* get masked status */
++		ldr	\irqstat, [\base, #(ARM_IRQ_PEND0 - ARMCTRL_IC_BASE)]
++		mov	\irqnr, #(ARM_IRQ0_BASE + 31)
++		and	\tmp, \irqstat, #0x300		 @ save bits 8 and 9
++		/* clear bits 8 and 9, and test */
++		bics	\irqstat, \irqstat, #0x300
++		bne	1010f
++
++		tst	\tmp, #0x100
++		ldrne	\irqstat, [\base, #(ARM_IRQ_PEND1 - ARMCTRL_IC_BASE)]
++		movne \irqnr, #(ARM_IRQ1_BASE + 31)
++		@ Mask out the interrupts also present in PEND0 - see SW-5809
++		bicne \irqstat, #((1<<7) | (1<<9) | (1<<10))
++		bicne \irqstat, #((1<<18) | (1<<19))
++		bne	1010f
++
++		tst	\tmp, #0x200
++		ldrne \irqstat, [\base, #(ARM_IRQ_PEND2 - ARMCTRL_IC_BASE)]
++		movne \irqnr, #(ARM_IRQ2_BASE + 31)
++		@ Mask out the interrupts also present in PEND0 - see SW-5809
++		bicne \irqstat, #((1<<21) | (1<<22) | (1<<23) | (1<<24) | (1<<25))
++		bicne \irqstat, #((1<<30))
++		beq 1020f
++
++1010:
++		@ For non-zero x, LSB(x) = 31 - CLZ(x^(x-1))
++		@ N.B. CLZ is an ARM5 instruction.
++		sub	\tmp, \irqstat, #1
++		eor	\irqstat, \irqstat, \tmp
++		clz	\tmp, \irqstat
++		sub	\irqnr, \tmp
++
++1020:	@ EQ will be set if no irqs pending
++
++		.endm
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/include/mach/frc.h linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/frc.h
+--- linux-3.12.6/arch/arm/mach-bcm2708/include/mach/frc.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/frc.h	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,38 @@
++/*
++ *  arch/arm/mach-bcm2708/include/mach/timex.h
++ *
++ *  BCM2708 free running counter (timer)
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#ifndef _MACH_FRC_H
++#define _MACH_FRC_H
++
++#define FRC_TICK_RATE		(1000000)
++
++/*! Free running counter incrementing at the CLOCK_TICK_RATE
++    (slightly faster than frc_clock_ticks63()
++ */
++extern unsigned long frc_clock_ticks32(void);
++
++/*! Free running counter incrementing at the CLOCK_TICK_RATE
++ *  Note - top bit should be ignored (see cnt32_to_63)
++ */
++extern unsigned long long frc_clock_ticks63(void);
++
++#endif
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/include/mach/gpio.h linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/gpio.h
+--- linux-3.12.6/arch/arm/mach-bcm2708/include/mach/gpio.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/gpio.h	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,17 @@
++/*
++ * arch/arm/mach-bcm2708/include/mach/gpio.h
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2.  This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#ifndef __ASM_ARCH_GPIO_H
++#define __ASM_ARCH_GPIO_H
++
++#define ARCH_NR_GPIOS 54 // number of gpio lines
++
++#define gpio_to_irq(x)	((x) + GPIO_IRQ_START)
++#define irq_to_gpio(x)	((x) - GPIO_IRQ_START)
++
++#endif
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/include/mach/hardware.h linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/hardware.h
+--- linux-3.12.6/arch/arm/mach-bcm2708/include/mach/hardware.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/hardware.h	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,28 @@
++/*
++ *  arch/arm/mach-bcm2708/include/mach/hardware.h
++ *
++ *  This file contains the hardware definitions of the BCM2708 devices.
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++#ifndef __ASM_ARCH_HARDWARE_H
++#define __ASM_ARCH_HARDWARE_H
++
++#include <asm/sizes.h>
++#include <mach/platform.h>
++
++#endif
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/include/mach/io.h linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/io.h
+--- linux-3.12.6/arch/arm/mach-bcm2708/include/mach/io.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/io.h	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,27 @@
++/*
++ *  arch/arm/mach-bcm2708/include/mach/io.h
++ *
++ *  Copyright (C) 2003 ARM Limited
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++#ifndef __ASM_ARM_ARCH_IO_H
++#define __ASM_ARM_ARCH_IO_H
++
++#define IO_SPACE_LIMIT 0xffffffff
++
++#define __io(a)		__typesafe_io(a)
++
++#endif
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/include/mach/irqs.h linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/irqs.h
+--- linux-3.12.6/arch/arm/mach-bcm2708/include/mach/irqs.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/irqs.h	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,199 @@
++/*
++ *  arch/arm/mach-bcm2708/include/mach/irqs.h
++ *
++ *  Copyright (C) 2010 Broadcom
++ *  Copyright (C) 2003 ARM Limited
++ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#ifndef _BCM2708_IRQS_H_
++#define _BCM2708_IRQS_H_
++
++#include <mach/platform.h>
++
++/*
++ *  IRQ interrupts definitions are the same as the INT definitions
++ *  held within platform.h
++ */
++#define IRQ_ARMCTRL_START     0
++#define IRQ_TIMER0            (IRQ_ARMCTRL_START + INTERRUPT_TIMER0)
++#define IRQ_TIMER1            (IRQ_ARMCTRL_START + INTERRUPT_TIMER1)
++#define IRQ_TIMER2            (IRQ_ARMCTRL_START + INTERRUPT_TIMER2)
++#define IRQ_TIMER3            (IRQ_ARMCTRL_START + INTERRUPT_TIMER3)
++#define IRQ_CODEC0            (IRQ_ARMCTRL_START + INTERRUPT_CODEC0)
++#define IRQ_CODEC1            (IRQ_ARMCTRL_START + INTERRUPT_CODEC1)
++#define IRQ_CODEC2            (IRQ_ARMCTRL_START + INTERRUPT_CODEC2)
++#define IRQ_JPEG              (IRQ_ARMCTRL_START + INTERRUPT_JPEG)
++#define IRQ_ISP               (IRQ_ARMCTRL_START + INTERRUPT_ISP)
++#define IRQ_USB               (IRQ_ARMCTRL_START + INTERRUPT_USB)
++#define IRQ_3D                (IRQ_ARMCTRL_START + INTERRUPT_3D)
++#define IRQ_TRANSPOSER        (IRQ_ARMCTRL_START + INTERRUPT_TRANSPOSER)
++#define IRQ_MULTICORESYNC0    (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC0)
++#define IRQ_MULTICORESYNC1    (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC1)
++#define IRQ_MULTICORESYNC2    (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC2)
++#define IRQ_MULTICORESYNC3    (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC3)
++#define IRQ_DMA0              (IRQ_ARMCTRL_START + INTERRUPT_DMA0)
++#define IRQ_DMA1              (IRQ_ARMCTRL_START + INTERRUPT_DMA1)
++#define IRQ_DMA2              (IRQ_ARMCTRL_START + INTERRUPT_DMA2)
++#define IRQ_DMA3              (IRQ_ARMCTRL_START + INTERRUPT_DMA3)
++#define IRQ_DMA4              (IRQ_ARMCTRL_START + INTERRUPT_DMA4)
++#define IRQ_DMA5              (IRQ_ARMCTRL_START + INTERRUPT_DMA5)
++#define IRQ_DMA6              (IRQ_ARMCTRL_START + INTERRUPT_DMA6)
++#define IRQ_DMA7              (IRQ_ARMCTRL_START + INTERRUPT_DMA7)
++#define IRQ_DMA8              (IRQ_ARMCTRL_START + INTERRUPT_DMA8)
++#define IRQ_DMA9              (IRQ_ARMCTRL_START + INTERRUPT_DMA9)
++#define IRQ_DMA10             (IRQ_ARMCTRL_START + INTERRUPT_DMA10)
++#define IRQ_DMA11             (IRQ_ARMCTRL_START + INTERRUPT_DMA11)
++#define IRQ_DMA12             (IRQ_ARMCTRL_START + INTERRUPT_DMA12)
++#define IRQ_AUX               (IRQ_ARMCTRL_START + INTERRUPT_AUX)
++#define IRQ_ARM               (IRQ_ARMCTRL_START + INTERRUPT_ARM)
++#define IRQ_VPUDMA            (IRQ_ARMCTRL_START + INTERRUPT_VPUDMA)
++#define IRQ_HOSTPORT          (IRQ_ARMCTRL_START + INTERRUPT_HOSTPORT)
++#define IRQ_VIDEOSCALER       (IRQ_ARMCTRL_START + INTERRUPT_VIDEOSCALER)
++#define IRQ_CCP2TX            (IRQ_ARMCTRL_START + INTERRUPT_CCP2TX)
++#define IRQ_SDC               (IRQ_ARMCTRL_START + INTERRUPT_SDC)
++#define IRQ_DSI0              (IRQ_ARMCTRL_START + INTERRUPT_DSI0)
++#define IRQ_AVE               (IRQ_ARMCTRL_START + INTERRUPT_AVE)
++#define IRQ_CAM0              (IRQ_ARMCTRL_START + INTERRUPT_CAM0)
++#define IRQ_CAM1              (IRQ_ARMCTRL_START + INTERRUPT_CAM1)
++#define IRQ_HDMI0             (IRQ_ARMCTRL_START + INTERRUPT_HDMI0)
++#define IRQ_HDMI1             (IRQ_ARMCTRL_START + INTERRUPT_HDMI1)
++#define IRQ_PIXELVALVE1       (IRQ_ARMCTRL_START + INTERRUPT_PIXELVALVE1)
++#define IRQ_I2CSPISLV         (IRQ_ARMCTRL_START + INTERRUPT_I2CSPISLV)
++#define IRQ_DSI1              (IRQ_ARMCTRL_START + INTERRUPT_DSI1)
++#define IRQ_PWA0              (IRQ_ARMCTRL_START + INTERRUPT_PWA0)
++#define IRQ_PWA1              (IRQ_ARMCTRL_START + INTERRUPT_PWA1)
++#define IRQ_CPR               (IRQ_ARMCTRL_START + INTERRUPT_CPR)
++#define IRQ_SMI               (IRQ_ARMCTRL_START + INTERRUPT_SMI)
++#define IRQ_GPIO0             (IRQ_ARMCTRL_START + INTERRUPT_GPIO0)
++#define IRQ_GPIO1             (IRQ_ARMCTRL_START + INTERRUPT_GPIO1)
++#define IRQ_GPIO2             (IRQ_ARMCTRL_START + INTERRUPT_GPIO2)
++#define IRQ_GPIO3             (IRQ_ARMCTRL_START + INTERRUPT_GPIO3)
++#define IRQ_I2C               (IRQ_ARMCTRL_START + INTERRUPT_I2C)
++#define IRQ_SPI               (IRQ_ARMCTRL_START + INTERRUPT_SPI)
++#define IRQ_I2SPCM            (IRQ_ARMCTRL_START + INTERRUPT_I2SPCM)
++#define IRQ_SDIO              (IRQ_ARMCTRL_START + INTERRUPT_SDIO)
++#define IRQ_UART              (IRQ_ARMCTRL_START + INTERRUPT_UART)
++#define IRQ_SLIMBUS           (IRQ_ARMCTRL_START + INTERRUPT_SLIMBUS)
++#define IRQ_VEC               (IRQ_ARMCTRL_START + INTERRUPT_VEC)
++#define IRQ_CPG               (IRQ_ARMCTRL_START + INTERRUPT_CPG)
++#define IRQ_RNG               (IRQ_ARMCTRL_START + INTERRUPT_RNG)
++#define IRQ_ARASANSDIO        (IRQ_ARMCTRL_START + INTERRUPT_ARASANSDIO)
++#define IRQ_AVSPMON           (IRQ_ARMCTRL_START + INTERRUPT_AVSPMON)
++
++#define IRQ_ARM_TIMER         (IRQ_ARMCTRL_START + INTERRUPT_ARM_TIMER)
++#define IRQ_ARM_MAILBOX       (IRQ_ARMCTRL_START + INTERRUPT_ARM_MAILBOX)
++#define IRQ_ARM_DOORBELL_0    (IRQ_ARMCTRL_START + INTERRUPT_ARM_DOORBELL_0)
++#define IRQ_ARM_DOORBELL_1    (IRQ_ARMCTRL_START + INTERRUPT_ARM_DOORBELL_1)
++#define IRQ_VPU0_HALTED       (IRQ_ARMCTRL_START + INTERRUPT_VPU0_HALTED)
++#define IRQ_VPU1_HALTED       (IRQ_ARMCTRL_START + INTERRUPT_VPU1_HALTED)
++#define IRQ_ILLEGAL_TYPE0     (IRQ_ARMCTRL_START + INTERRUPT_ILLEGAL_TYPE0)
++#define IRQ_ILLEGAL_TYPE1     (IRQ_ARMCTRL_START + INTERRUPT_ILLEGAL_TYPE1)
++#define IRQ_PENDING1          (IRQ_ARMCTRL_START + INTERRUPT_PENDING1)
++#define IRQ_PENDING2          (IRQ_ARMCTRL_START + INTERRUPT_PENDING2)
++
++#define FIQ_START             HARD_IRQS
++
++/*
++ *  FIQ interrupts definitions are the same as the INT definitions.
++ */
++#define FIQ_TIMER0            (FIQ_START+INTERRUPT_TIMER0)
++#define FIQ_TIMER1            (FIQ_START+INTERRUPT_TIMER1)
++#define FIQ_TIMER2            (FIQ_START+INTERRUPT_TIMER2)
++#define FIQ_TIMER3            (FIQ_START+INTERRUPT_TIMER3)
++#define FIQ_CODEC0            (FIQ_START+INTERRUPT_CODEC0)
++#define FIQ_CODEC1            (FIQ_START+INTERRUPT_CODEC1)
++#define FIQ_CODEC2            (FIQ_START+INTERRUPT_CODEC2)
++#define FIQ_JPEG              (FIQ_START+INTERRUPT_JPEG)
++#define FIQ_ISP               (FIQ_START+INTERRUPT_ISP)
++#define FIQ_USB               (FIQ_START+INTERRUPT_USB)
++#define FIQ_3D                (FIQ_START+INTERRUPT_3D)
++#define FIQ_TRANSPOSER        (FIQ_START+INTERRUPT_TRANSPOSER)
++#define FIQ_MULTICORESYNC0    (FIQ_START+INTERRUPT_MULTICORESYNC0)
++#define FIQ_MULTICORESYNC1    (FIQ_START+INTERRUPT_MULTICORESYNC1)
++#define FIQ_MULTICORESYNC2    (FIQ_START+INTERRUPT_MULTICORESYNC2)
++#define FIQ_MULTICORESYNC3    (FIQ_START+INTERRUPT_MULTICORESYNC3)
++#define FIQ_DMA0              (FIQ_START+INTERRUPT_DMA0)
++#define FIQ_DMA1              (FIQ_START+INTERRUPT_DMA1)
++#define FIQ_DMA2              (FIQ_START+INTERRUPT_DMA2)
++#define FIQ_DMA3              (FIQ_START+INTERRUPT_DMA3)
++#define FIQ_DMA4              (FIQ_START+INTERRUPT_DMA4)
++#define FIQ_DMA5              (FIQ_START+INTERRUPT_DMA5)
++#define FIQ_DMA6              (FIQ_START+INTERRUPT_DMA6)
++#define FIQ_DMA7              (FIQ_START+INTERRUPT_DMA7)
++#define FIQ_DMA8              (FIQ_START+INTERRUPT_DMA8)
++#define FIQ_DMA9              (FIQ_START+INTERRUPT_DMA9)
++#define FIQ_DMA10             (FIQ_START+INTERRUPT_DMA10)
++#define FIQ_DMA11             (FIQ_START+INTERRUPT_DMA11)
++#define FIQ_DMA12             (FIQ_START+INTERRUPT_DMA12)
++#define FIQ_AUX               (FIQ_START+INTERRUPT_AUX)
++#define FIQ_ARM               (FIQ_START+INTERRUPT_ARM)
++#define FIQ_VPUDMA            (FIQ_START+INTERRUPT_VPUDMA)
++#define FIQ_HOSTPORT          (FIQ_START+INTERRUPT_HOSTPORT)
++#define FIQ_VIDEOSCALER       (FIQ_START+INTERRUPT_VIDEOSCALER)
++#define FIQ_CCP2TX            (FIQ_START+INTERRUPT_CCP2TX)
++#define FIQ_SDC               (FIQ_START+INTERRUPT_SDC)
++#define FIQ_DSI0              (FIQ_START+INTERRUPT_DSI0)
++#define FIQ_AVE               (FIQ_START+INTERRUPT_AVE)
++#define FIQ_CAM0              (FIQ_START+INTERRUPT_CAM0)
++#define FIQ_CAM1              (FIQ_START+INTERRUPT_CAM1)
++#define FIQ_HDMI0             (FIQ_START+INTERRUPT_HDMI0)
++#define FIQ_HDMI1             (FIQ_START+INTERRUPT_HDMI1)
++#define FIQ_PIXELVALVE1       (FIQ_START+INTERRUPT_PIXELVALVE1)
++#define FIQ_I2CSPISLV         (FIQ_START+INTERRUPT_I2CSPISLV)
++#define FIQ_DSI1              (FIQ_START+INTERRUPT_DSI1)
++#define FIQ_PWA0              (FIQ_START+INTERRUPT_PWA0)
++#define FIQ_PWA1              (FIQ_START+INTERRUPT_PWA1)
++#define FIQ_CPR               (FIQ_START+INTERRUPT_CPR)
++#define FIQ_SMI               (FIQ_START+INTERRUPT_SMI)
++#define FIQ_GPIO0             (FIQ_START+INTERRUPT_GPIO0)
++#define FIQ_GPIO1             (FIQ_START+INTERRUPT_GPIO1)
++#define FIQ_GPIO2             (FIQ_START+INTERRUPT_GPIO2)
++#define FIQ_GPIO3             (FIQ_START+INTERRUPT_GPIO3)
++#define FIQ_I2C               (FIQ_START+INTERRUPT_I2C)
++#define FIQ_SPI               (FIQ_START+INTERRUPT_SPI)
++#define FIQ_I2SPCM            (FIQ_START+INTERRUPT_I2SPCM)
++#define FIQ_SDIO              (FIQ_START+INTERRUPT_SDIO)
++#define FIQ_UART              (FIQ_START+INTERRUPT_UART)
++#define FIQ_SLIMBUS           (FIQ_START+INTERRUPT_SLIMBUS)
++#define FIQ_VEC               (FIQ_START+INTERRUPT_VEC)
++#define FIQ_CPG               (FIQ_START+INTERRUPT_CPG)
++#define FIQ_RNG               (FIQ_START+INTERRUPT_RNG)
++#define FIQ_ARASANSDIO        (FIQ_START+INTERRUPT_ARASANSDIO)
++#define FIQ_AVSPMON           (FIQ_START+INTERRUPT_AVSPMON)
++
++#define FIQ_ARM_TIMER         (FIQ_START+INTERRUPT_ARM_TIMER)
++#define FIQ_ARM_MAILBOX       (FIQ_START+INTERRUPT_ARM_MAILBOX)
++#define FIQ_ARM_DOORBELL_0    (FIQ_START+INTERRUPT_ARM_DOORBELL_0)
++#define FIQ_ARM_DOORBELL_1    (FIQ_START+INTERRUPT_ARM_DOORBELL_1)
++#define FIQ_VPU0_HALTED       (FIQ_START+INTERRUPT_VPU0_HALTED)
++#define FIQ_VPU1_HALTED       (FIQ_START+INTERRUPT_VPU1_HALTED)
++#define FIQ_ILLEGAL_TYPE0     (FIQ_START+INTERRUPT_ILLEGAL_TYPE0)
++#define FIQ_ILLEGAL_TYPE1     (FIQ_START+INTERRUPT_ILLEGAL_TYPE1)
++#define FIQ_PENDING1          (FIQ_START+INTERRUPT_PENDING1)
++#define FIQ_PENDING2          (FIQ_START+INTERRUPT_PENDING2)
++
++#define GPIO_IRQ_START	      (HARD_IRQS + FIQ_IRQS)
++
++#define HARD_IRQS	      (64 + 21)
++#define FIQ_IRQS              (64 + 21)
++#define GPIO_IRQS	      (32*5)
++
++#define NR_IRQS		      HARD_IRQS+FIQ_IRQS+GPIO_IRQS
++
++
++#endif /* _BCM2708_IRQS_H_ */
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/include/mach/memory.h linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/memory.h
+--- linux-3.12.6/arch/arm/mach-bcm2708/include/mach/memory.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/memory.h	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,57 @@
++/*
++ *  arch/arm/mach-bcm2708/include/mach/memory.h
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++#ifndef __ASM_ARCH_MEMORY_H
++#define __ASM_ARCH_MEMORY_H
++
++/* Memory overview:
++
++   [ARMcore] <--virtual addr-->
++   [ARMmmu] <--physical addr-->
++   [GERTmap] <--bus add-->
++   [VCperiph]
++
++*/
++
++/*
++ * Physical DRAM offset.
++ */
++#define PLAT_PHYS_OFFSET	UL(0x00000000)
++#define VC_ARMMEM_OFFSET	UL(0x00000000)   /* offset in VC of ARM memory */
++
++#ifdef CONFIG_BCM2708_NOL2CACHE
++ #define _REAL_BUS_OFFSET UL(0xC0000000)   /* don't use L1 or L2 caches */
++#else
++ #define _REAL_BUS_OFFSET UL(0x40000000)   /* use L2 cache */
++#endif
++
++/* We're using the memory at 64M in the VideoCore for Linux - this adjustment
++ * will provide the offset into this area as well as setting the bits that
++ * stop the L1 and L2 cache from being used
++ *
++ * WARNING: this only works because the ARM is given memory at a fixed location
++ *          (ARMMEM_OFFSET)
++ */
++#define BUS_OFFSET          (VC_ARMMEM_OFFSET + _REAL_BUS_OFFSET)
++#define __virt_to_bus(x)    ((x) + (BUS_OFFSET - PAGE_OFFSET))
++#define __bus_to_virt(x)    ((x) - (BUS_OFFSET - PAGE_OFFSET))
++#define __pfn_to_bus(x)     (__pfn_to_phys(x) + (BUS_OFFSET - PLAT_PHYS_OFFSET))
++#define __bus_to_pfn(x)     __phys_to_pfn((x) - (BUS_OFFSET - PLAT_PHYS_OFFSET))
++
++#endif
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/include/mach/platform.h linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/platform.h
+--- linux-3.12.6/arch/arm/mach-bcm2708/include/mach/platform.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/platform.h	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,228 @@
++/*
++ * arch/arm/mach-bcm2708/include/mach/platform.h
++ *
++ * Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#ifndef _BCM2708_PLATFORM_H
++#define _BCM2708_PLATFORM_H
++
++
++/* macros to get at IO space when running virtually */
++#define IO_ADDRESS(x)	(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
++
++#define __io_address(n)     IOMEM(IO_ADDRESS(n))
++
++
++/*
++ *  SDRAM
++ */
++#define BCM2708_SDRAM_BASE           0x00000000
++
++/*
++ *  Logic expansion modules
++ *
++ */
++
++
++/* ------------------------------------------------------------------------
++ *  BCM2708 ARMCTRL Registers
++ * ------------------------------------------------------------------------
++ */
++
++#define HW_REGISTER_RW(addr) (addr)
++#define HW_REGISTER_RO(addr) (addr)
++
++#include "arm_control.h"
++#undef ARM_BASE
++
++/*
++ * Definitions and addresses for the ARM CONTROL logic
++ * This file is manually generated.
++ */
++
++#define BCM2708_PERI_BASE        0x20000000
++#define IC0_BASE                 (BCM2708_PERI_BASE + 0x2000)
++#define ST_BASE                  (BCM2708_PERI_BASE + 0x3000)   /* System Timer */
++#define MPHI_BASE		 (BCM2708_PERI_BASE + 0x6000)	/* Message -based Parallel Host Interface */
++#define DMA_BASE		 (BCM2708_PERI_BASE + 0x7000)	/* DMA controller */
++#define ARM_BASE                 (BCM2708_PERI_BASE + 0xB000)	 /* BCM2708 ARM control block */
++#define PM_BASE			 (BCM2708_PERI_BASE + 0x100000) /* Power Management, Reset controller and Watchdog registers */
++#define PCM_CLOCK_BASE           (BCM2708_PERI_BASE + 0x101098) /* PCM Clock */
++#define RNG_BASE                 (BCM2708_PERI_BASE + 0x104000) /* Hardware RNG */
++#define GPIO_BASE                (BCM2708_PERI_BASE + 0x200000) /* GPIO */
++#define UART0_BASE               (BCM2708_PERI_BASE + 0x201000)	/* Uart 0 */
++#define MMCI0_BASE               (BCM2708_PERI_BASE + 0x202000) /* MMC interface */
++#define I2S_BASE                 (BCM2708_PERI_BASE + 0x203000) /* I2S */
++#define SPI0_BASE		 (BCM2708_PERI_BASE + 0x204000) /* SPI0 */
++#define BSC0_BASE		 (BCM2708_PERI_BASE + 0x205000) /* BSC0 I2C/TWI */
++#define UART1_BASE               (BCM2708_PERI_BASE + 0x215000) /* Uart 1 */
++#define EMMC_BASE                (BCM2708_PERI_BASE + 0x300000) /* eMMC interface */
++#define SMI_BASE		 (BCM2708_PERI_BASE + 0x600000) /* SMI */
++#define BSC1_BASE		 (BCM2708_PERI_BASE + 0x804000) /* BSC1 I2C/TWI */
++#define USB_BASE                 (BCM2708_PERI_BASE + 0x980000) /* DTC_OTG USB controller */
++#define MCORE_BASE               (BCM2708_PERI_BASE + 0x0000)   /* Fake frame buffer device (actually the multicore sync block*/
++
++#define ARMCTRL_BASE             (ARM_BASE + 0x000)
++#define ARMCTRL_IC_BASE          (ARM_BASE + 0x200)           /* ARM interrupt controller */
++#define ARMCTRL_TIMER0_1_BASE    (ARM_BASE + 0x400)           /* Timer 0 and 1 */
++#define ARMCTRL_0_SBM_BASE       (ARM_BASE + 0x800)           /* User 0 (ARM)'s Semaphores Doorbells and Mailboxes */
++
++
++/*
++ * Interrupt assignments
++ */
++
++#define ARM_IRQ1_BASE                  0
++#define INTERRUPT_TIMER0               (ARM_IRQ1_BASE + 0)
++#define INTERRUPT_TIMER1               (ARM_IRQ1_BASE + 1)
++#define INTERRUPT_TIMER2               (ARM_IRQ1_BASE + 2)
++#define INTERRUPT_TIMER3               (ARM_IRQ1_BASE + 3)
++#define INTERRUPT_CODEC0               (ARM_IRQ1_BASE + 4)
++#define INTERRUPT_CODEC1               (ARM_IRQ1_BASE + 5)
++#define INTERRUPT_CODEC2               (ARM_IRQ1_BASE + 6)
++#define INTERRUPT_VC_JPEG              (ARM_IRQ1_BASE + 7)
++#define INTERRUPT_ISP                  (ARM_IRQ1_BASE + 8)
++#define INTERRUPT_VC_USB               (ARM_IRQ1_BASE + 9)
++#define INTERRUPT_VC_3D                (ARM_IRQ1_BASE + 10)
++#define INTERRUPT_TRANSPOSER           (ARM_IRQ1_BASE + 11)
++#define INTERRUPT_MULTICORESYNC0       (ARM_IRQ1_BASE + 12)
++#define INTERRUPT_MULTICORESYNC1       (ARM_IRQ1_BASE + 13)
++#define INTERRUPT_MULTICORESYNC2       (ARM_IRQ1_BASE + 14)
++#define INTERRUPT_MULTICORESYNC3       (ARM_IRQ1_BASE + 15)
++#define INTERRUPT_DMA0                 (ARM_IRQ1_BASE + 16)
++#define INTERRUPT_DMA1                 (ARM_IRQ1_BASE + 17)
++#define INTERRUPT_VC_DMA2              (ARM_IRQ1_BASE + 18)
++#define INTERRUPT_VC_DMA3              (ARM_IRQ1_BASE + 19)
++#define INTERRUPT_DMA4                 (ARM_IRQ1_BASE + 20)
++#define INTERRUPT_DMA5                 (ARM_IRQ1_BASE + 21)
++#define INTERRUPT_DMA6                 (ARM_IRQ1_BASE + 22)
++#define INTERRUPT_DMA7                 (ARM_IRQ1_BASE + 23)
++#define INTERRUPT_DMA8                 (ARM_IRQ1_BASE + 24)
++#define INTERRUPT_DMA9                 (ARM_IRQ1_BASE + 25)
++#define INTERRUPT_DMA10                (ARM_IRQ1_BASE + 26)
++#define INTERRUPT_DMA11                (ARM_IRQ1_BASE + 27)
++#define INTERRUPT_DMA12                (ARM_IRQ1_BASE + 28)
++#define INTERRUPT_AUX                (ARM_IRQ1_BASE + 29)
++#define INTERRUPT_ARM                  (ARM_IRQ1_BASE + 30)
++#define INTERRUPT_VPUDMA               (ARM_IRQ1_BASE + 31)
++
++#define ARM_IRQ2_BASE                  32
++#define INTERRUPT_HOSTPORT             (ARM_IRQ2_BASE + 0)
++#define INTERRUPT_VIDEOSCALER          (ARM_IRQ2_BASE + 1)
++#define INTERRUPT_CCP2TX               (ARM_IRQ2_BASE + 2)
++#define INTERRUPT_SDC                  (ARM_IRQ2_BASE + 3)
++#define INTERRUPT_DSI0                 (ARM_IRQ2_BASE + 4)
++#define INTERRUPT_AVE                  (ARM_IRQ2_BASE + 5)
++#define INTERRUPT_CAM0                 (ARM_IRQ2_BASE + 6)
++#define INTERRUPT_CAM1                 (ARM_IRQ2_BASE + 7)
++#define INTERRUPT_HDMI0                (ARM_IRQ2_BASE + 8)
++#define INTERRUPT_HDMI1                (ARM_IRQ2_BASE + 9)
++#define INTERRUPT_PIXELVALVE1          (ARM_IRQ2_BASE + 10)
++#define INTERRUPT_I2CSPISLV            (ARM_IRQ2_BASE + 11)
++#define INTERRUPT_DSI1                 (ARM_IRQ2_BASE + 12)
++#define INTERRUPT_PWA0                 (ARM_IRQ2_BASE + 13)
++#define INTERRUPT_PWA1                 (ARM_IRQ2_BASE + 14)
++#define INTERRUPT_CPR                  (ARM_IRQ2_BASE + 15)
++#define INTERRUPT_SMI                  (ARM_IRQ2_BASE + 16)
++#define INTERRUPT_GPIO0                (ARM_IRQ2_BASE + 17)
++#define INTERRUPT_GPIO1                (ARM_IRQ2_BASE + 18)
++#define INTERRUPT_GPIO2                (ARM_IRQ2_BASE + 19)
++#define INTERRUPT_GPIO3                (ARM_IRQ2_BASE + 20)
++#define INTERRUPT_VC_I2C               (ARM_IRQ2_BASE + 21)
++#define INTERRUPT_VC_SPI               (ARM_IRQ2_BASE + 22)
++#define INTERRUPT_VC_I2SPCM            (ARM_IRQ2_BASE + 23)
++#define INTERRUPT_VC_SDIO              (ARM_IRQ2_BASE + 24)
++#define INTERRUPT_VC_UART              (ARM_IRQ2_BASE + 25)
++#define INTERRUPT_SLIMBUS              (ARM_IRQ2_BASE + 26)
++#define INTERRUPT_VEC                  (ARM_IRQ2_BASE + 27)
++#define INTERRUPT_CPG                  (ARM_IRQ2_BASE + 28)
++#define INTERRUPT_RNG                  (ARM_IRQ2_BASE + 29)
++#define INTERRUPT_VC_ARASANSDIO        (ARM_IRQ2_BASE + 30)
++#define INTERRUPT_AVSPMON              (ARM_IRQ2_BASE + 31)
++
++#define ARM_IRQ0_BASE                  64
++#define INTERRUPT_ARM_TIMER            (ARM_IRQ0_BASE + 0)
++#define INTERRUPT_ARM_MAILBOX          (ARM_IRQ0_BASE + 1)
++#define INTERRUPT_ARM_DOORBELL_0       (ARM_IRQ0_BASE + 2)
++#define INTERRUPT_ARM_DOORBELL_1       (ARM_IRQ0_BASE + 3)
++#define INTERRUPT_VPU0_HALTED          (ARM_IRQ0_BASE + 4)
++#define INTERRUPT_VPU1_HALTED          (ARM_IRQ0_BASE + 5)
++#define INTERRUPT_ILLEGAL_TYPE0        (ARM_IRQ0_BASE + 6)
++#define INTERRUPT_ILLEGAL_TYPE1        (ARM_IRQ0_BASE + 7)
++#define INTERRUPT_PENDING1             (ARM_IRQ0_BASE + 8)
++#define INTERRUPT_PENDING2             (ARM_IRQ0_BASE + 9)
++#define INTERRUPT_JPEG                 (ARM_IRQ0_BASE + 10)
++#define INTERRUPT_USB                  (ARM_IRQ0_BASE + 11)
++#define INTERRUPT_3D                   (ARM_IRQ0_BASE + 12)
++#define INTERRUPT_DMA2                 (ARM_IRQ0_BASE + 13)
++#define INTERRUPT_DMA3                 (ARM_IRQ0_BASE + 14)
++#define INTERRUPT_I2C                  (ARM_IRQ0_BASE + 15)
++#define INTERRUPT_SPI                  (ARM_IRQ0_BASE + 16)
++#define INTERRUPT_I2SPCM               (ARM_IRQ0_BASE + 17)
++#define INTERRUPT_SDIO                 (ARM_IRQ0_BASE + 18)
++#define INTERRUPT_UART                 (ARM_IRQ0_BASE + 19)
++#define INTERRUPT_ARASANSDIO           (ARM_IRQ0_BASE + 20)
++
++#define MAXIRQNUM                      (32 + 32 + 20)
++#define MAXFIQNUM                      (32 + 32 + 20)
++
++#define MAX_TIMER                       2
++#define MAX_PERIOD                      699050
++#define TICKS_PER_uSEC                  1
++
++/*
++ *  These are useconds NOT ticks.
++ *
++ */
++#define mSEC_1                          1000
++#define mSEC_5                          (mSEC_1 * 5)
++#define mSEC_10                         (mSEC_1 * 10)
++#define mSEC_25                         (mSEC_1 * 25)
++#define SEC_1                           (mSEC_1 * 1000)
++
++/*
++ * Watchdog
++ */
++#define PM_RSTC			       (PM_BASE+0x1c)
++#define PM_RSTS			       (PM_BASE+0x20)
++#define PM_WDOG			       (PM_BASE+0x24)
++
++#define PM_WDOG_RESET                                         0000000000
++#define PM_PASSWORD		       0x5a000000
++#define PM_WDOG_TIME_SET	       0x000fffff
++#define PM_RSTC_WRCFG_CLR              0xffffffcf
++#define PM_RSTC_WRCFG_SET              0x00000030
++#define PM_RSTC_WRCFG_FULL_RESET       0x00000020
++#define PM_RSTC_RESET                  0x00000102
++
++#define PM_RSTS_HADPOR_SET                                 0x00001000
++#define PM_RSTS_HADSRH_SET                                 0x00000400
++#define PM_RSTS_HADSRF_SET                                 0x00000200
++#define PM_RSTS_HADSRQ_SET                                 0x00000100
++#define PM_RSTS_HADWRH_SET                                 0x00000040
++#define PM_RSTS_HADWRF_SET                                 0x00000020
++#define PM_RSTS_HADWRQ_SET                                 0x00000010
++#define PM_RSTS_HADDRH_SET                                 0x00000004
++#define PM_RSTS_HADDRF_SET                                 0x00000002
++#define PM_RSTS_HADDRQ_SET                                 0x00000001
++
++#define UART0_CLOCK      3000000
++
++#endif
++
++/* END */
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/include/mach/power.h linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/power.h
+--- linux-3.12.6/arch/arm/mach-bcm2708/include/mach/power.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/power.h	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,26 @@
++/*
++ *  linux/arch/arm/mach-bcm2708/power.h
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This device provides a shared mechanism for controlling the power to
++ * VideoCore subsystems.
++ */
++
++#ifndef _MACH_BCM2708_POWER_H
++#define _MACH_BCM2708_POWER_H
++
++#include <linux/types.h>
++#include <mach/arm_power.h>
++
++typedef unsigned int BCM_POWER_HANDLE_T;
++
++extern int bcm_power_open(BCM_POWER_HANDLE_T *handle);
++extern int bcm_power_request(BCM_POWER_HANDLE_T handle, uint32_t request);
++extern int bcm_power_close(BCM_POWER_HANDLE_T handle);
++
++#endif
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/include/mach/system.h linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/system.h
+--- linux-3.12.6/arch/arm/mach-bcm2708/include/mach/system.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/system.h	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,38 @@
++/*
++ *  arch/arm/mach-bcm2708/include/mach/system.h
++ *
++ *  Copyright (C) 2010 Broadcom
++ *  Copyright (C) 2003 ARM Limited
++ *  Copyright (C) 2000 Deep Blue Solutions Ltd
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++#ifndef __ASM_ARCH_SYSTEM_H
++#define __ASM_ARCH_SYSTEM_H
++
++#include <linux/io.h>
++#include <mach/hardware.h>
++#include <mach/platform.h>
++
++static inline void arch_idle(void)
++{
++	/*
++	 * This should do all the clock switching
++	 * and wait for interrupt tricks
++	 */
++	cpu_do_idle();
++}
++
++#endif
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/include/mach/timex.h linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/timex.h
+--- linux-3.12.6/arch/arm/mach-bcm2708/include/mach/timex.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/timex.h	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,23 @@
++/*
++ *  arch/arm/mach-bcm2708/include/mach/timex.h
++ *
++ *  BCM2708 sysem clock frequency
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#define CLOCK_TICK_RATE		(1000000)
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/include/mach/uncompress.h linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/uncompress.h
+--- linux-3.12.6/arch/arm/mach-bcm2708/include/mach/uncompress.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/uncompress.h	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,84 @@
++/*
++ *  arch/arm/mach-bcn2708/include/mach/uncompress.h
++ *
++ *  Copyright (C) 2010 Broadcom
++ *  Copyright (C) 2003 ARM Limited
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <linux/io.h>
++#include <linux/amba/serial.h>
++#include <mach/hardware.h>
++
++#define UART_BAUD 115200
++
++#define BCM2708_UART_DR   __io(UART0_BASE + UART01x_DR)
++#define BCM2708_UART_FR   __io(UART0_BASE + UART01x_FR)
++#define BCM2708_UART_IBRD __io(UART0_BASE + UART011_IBRD)
++#define BCM2708_UART_FBRD __io(UART0_BASE + UART011_FBRD)
++#define BCM2708_UART_LCRH __io(UART0_BASE + UART011_LCRH)
++#define BCM2708_UART_CR   __io(UART0_BASE + UART011_CR)
++
++/*
++ * This does not append a newline
++ */
++static inline void putc(int c)
++{
++	while (__raw_readl(BCM2708_UART_FR) & UART01x_FR_TXFF)
++		barrier();
++
++	__raw_writel(c, BCM2708_UART_DR);
++}
++
++static inline void flush(void)
++{
++	int fr;
++
++	do {
++		fr = __raw_readl(BCM2708_UART_FR);
++		barrier();
++	} while ((fr & (UART011_FR_TXFE | UART01x_FR_BUSY)) != UART011_FR_TXFE);
++}
++
++static inline void arch_decomp_setup(void)
++{
++	int temp, div, rem, frac;
++
++	temp = 16 * UART_BAUD;
++	div = UART0_CLOCK / temp;
++	rem = UART0_CLOCK % temp;
++	temp = (8 * rem) / UART_BAUD;
++	frac = (temp >> 1) + (temp & 1);
++
++	/* Make sure the UART is disabled before we start */
++	__raw_writel(0, BCM2708_UART_CR);
++
++	/* Set the baud rate */
++	__raw_writel(div, BCM2708_UART_IBRD);
++	__raw_writel(frac, BCM2708_UART_FBRD);
++
++	/* Set the UART to 8n1, FIFO enabled */
++	__raw_writel(UART01x_LCRH_WLEN_8 | UART01x_LCRH_FEN, BCM2708_UART_LCRH);
++
++	/* Enable the UART */
++	__raw_writel(UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_RXE,
++			BCM2708_UART_CR);
++}
++
++/*
++ * nothing to do
++ */
++#define arch_decomp_wdog()
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/include/mach/vcio.h linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/vcio.h
+--- linux-3.12.6/arch/arm/mach-bcm2708/include/mach/vcio.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/vcio.h	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,141 @@
++/*
++ *  arch/arm/mach-bcm2708/include/mach/vcio.h
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++#ifndef _MACH_BCM2708_VCIO_H
++#define _MACH_BCM2708_VCIO_H
++
++/* Routines to handle I/O via the VideoCore "ARM control" registers
++ * (semaphores, doorbells, mailboxes)
++ */
++
++#define BCM_VCIO_DRIVER_NAME "bcm2708_vcio"
++
++/* Constants shared with the ARM identifying separate mailbox channels */
++#define MBOX_CHAN_POWER    0 /* for use by the power management interface */
++#define MBOX_CHAN_FB       1 /* for use by the frame buffer */
++#define MBOX_CHAN_VCHIQ    3 /* for use by the VCHIQ interface */
++#define MBOX_CHAN_PROPERTY 8 /* for use by the property channel */
++#define MBOX_CHAN_COUNT    9
++
++/* Mailbox property tags */
++enum {
++	VCMSG_PROPERTY_END               = 0x00000000,
++	VCMSG_GET_FIRMWARE_REVISION      = 0x00000001,
++	VCMSG_GET_BOARD_MODEL            = 0x00010001,
++	VCMSG_GET_BOARD_REVISION	 = 0x00020002,
++	VCMSG_GET_BOARD_MAC_ADDRESS	 = 0x00020003,
++	VCMSG_GET_BOARD_SERIAL		 = 0x00020004,
++	VCMSG_GET_ARM_MEMORY		 = 0x00020005,
++	VCMSG_GET_VC_MEMORY		 = 0x00020006,
++	VCMSG_GET_CLOCKS		 = 0x00020007,
++	VCMSG_GET_COMMAND_LINE           = 0x00050001,
++	VCMSG_GET_DMA_CHANNELS           = 0x00060001,
++	VCMSG_GET_POWER_STATE            = 0x00020001,
++	VCMSG_GET_TIMING		 = 0x00020002,
++	VCMSG_SET_POWER_STATE            = 0x00028001,
++	VCMSG_GET_CLOCK_STATE            = 0x00030001,
++	VCMSG_SET_CLOCK_STATE            = 0x00038001,
++	VCMSG_GET_CLOCK_RATE             = 0x00030002,
++	VCMSG_SET_CLOCK_RATE             = 0x00038002,
++	VCMSG_GET_VOLTAGE                = 0x00030003,
++	VCMSG_SET_VOLTAGE                = 0x00038003,
++	VCMSG_GET_MAX_CLOCK              = 0x00030004,
++	VCMSG_GET_MAX_VOLTAGE            = 0x00030005,
++	VCMSG_GET_TEMPERATURE            = 0x00030006,
++	VCMSG_GET_MIN_CLOCK              = 0x00030007,
++	VCMSG_GET_MIN_VOLTAGE            = 0x00030008,
++	VCMSG_GET_TURBO                  = 0x00030009,
++	VCMSG_SET_TURBO                  = 0x00038009,
++	VCMSG_SET_ALLOCATE_BUFFER        = 0x00040001,
++	VCMSG_SET_RELEASE_BUFFER         = 0x00048001,
++	VCMSG_SET_BLANK_SCREEN           = 0x00040002,
++	VCMSG_TST_BLANK_SCREEN           = 0x00044002,
++	VCMSG_GET_PHYSICAL_WIDTH_HEIGHT  = 0x00040003,
++	VCMSG_TST_PHYSICAL_WIDTH_HEIGHT  = 0x00044003,
++	VCMSG_SET_PHYSICAL_WIDTH_HEIGHT  = 0x00048003,
++	VCMSG_GET_VIRTUAL_WIDTH_HEIGHT   = 0x00040004,
++	VCMSG_TST_VIRTUAL_WIDTH_HEIGHT   = 0x00044004,
++	VCMSG_SET_VIRTUAL_WIDTH_HEIGHT   = 0x00048004,
++	VCMSG_GET_DEPTH                  = 0x00040005,
++	VCMSG_TST_DEPTH                  = 0x00044005,
++	VCMSG_SET_DEPTH                  = 0x00048005,
++	VCMSG_GET_PIXEL_ORDER            = 0x00040006,
++	VCMSG_TST_PIXEL_ORDER            = 0x00044006,
++	VCMSG_SET_PIXEL_ORDER            = 0x00048006,
++	VCMSG_GET_ALPHA_MODE             = 0x00040007,
++	VCMSG_TST_ALPHA_MODE             = 0x00044007,
++	VCMSG_SET_ALPHA_MODE             = 0x00048007,
++	VCMSG_GET_PITCH                  = 0x00040008,
++	VCMSG_TST_PITCH                  = 0x00044008,
++	VCMSG_SET_PITCH                  = 0x00048008,
++	VCMSG_GET_VIRTUAL_OFFSET         = 0x00040009,
++	VCMSG_TST_VIRTUAL_OFFSET         = 0x00044009,
++	VCMSG_SET_VIRTUAL_OFFSET         = 0x00048009,
++	VCMSG_GET_OVERSCAN               = 0x0004000a,
++	VCMSG_TST_OVERSCAN               = 0x0004400a,
++	VCMSG_SET_OVERSCAN               = 0x0004800a,
++	VCMSG_GET_PALETTE                = 0x0004000b,
++	VCMSG_TST_PALETTE                = 0x0004400b,
++	VCMSG_SET_PALETTE                = 0x0004800b,
++	VCMSG_GET_LAYER                  = 0x0004000c,
++	VCMSG_TST_LAYER                  = 0x0004400c,
++	VCMSG_SET_LAYER                  = 0x0004800c,
++	VCMSG_GET_TRANSFORM              = 0x0004000d,
++	VCMSG_TST_TRANSFORM              = 0x0004400d,
++	VCMSG_SET_TRANSFORM              = 0x0004800d,
++};
++
++extern int /*rc*/ bcm_mailbox_read(unsigned chan, uint32_t *data28);
++extern int /*rc*/ bcm_mailbox_write(unsigned chan, uint32_t data28);
++extern int /*rc*/ bcm_mailbox_property(void *data, int size);
++
++#include <linux/ioctl.h>
++
++/*
++ * The major device number. We can't rely on dynamic
++ * registration any more, because ioctls need to know
++ * it.
++ */
++#define MAJOR_NUM 100
++
++/*
++ * Set the message of the device driver
++ */
++#define IOCTL_MBOX_PROPERTY _IOWR(MAJOR_NUM, 0, char *)
++/*
++ * _IOWR means that we're creating an ioctl command
++ * number for passing information from a user process
++ * to the kernel module and from the kernel module to user process
++ *
++ * The first arguments, MAJOR_NUM, is the major device
++ * number we're using.
++ *
++ * The second argument is the number of the command
++ * (there could be several with different meanings).
++ *
++ * The third argument is the type we want to get from
++ * the process to the kernel.
++ */
++
++/*
++ * The name of the device file
++ */
++#define DEVICE_FILE_NAME "char_dev"
++
++#endif
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/include/mach/vc_mem.h linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/vc_mem.h
+--- linux-3.12.6/arch/arm/mach-bcm2708/include/mach/vc_mem.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/vc_mem.h	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,35 @@
++/*****************************************************************************
++* Copyright 2010 - 2011 Broadcom Corporation.  All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#if !defined( VC_MEM_H )
++#define VC_MEM_H
++
++#include <linux/ioctl.h>
++
++#define VC_MEM_IOC_MAGIC  'v'
++
++#define VC_MEM_IOC_MEM_PHYS_ADDR    _IOR( VC_MEM_IOC_MAGIC, 0, unsigned long )
++#define VC_MEM_IOC_MEM_SIZE         _IOR( VC_MEM_IOC_MAGIC, 1, unsigned int )
++#define VC_MEM_IOC_MEM_BASE         _IOR( VC_MEM_IOC_MAGIC, 2, unsigned int )
++#define VC_MEM_IOC_MEM_LOAD         _IOR( VC_MEM_IOC_MAGIC, 3, unsigned int )
++
++#if defined( __KERNEL__ )
++#define VC_MEM_TO_ARM_ADDR_MASK 0x3FFFFFFF
++
++extern unsigned long mm_vc_mem_phys_addr;
++extern unsigned int  mm_vc_mem_size;
++extern int vc_mem_get_current_size( void );
++#endif
++
++#endif  /* VC_MEM_H */
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/include/mach/vc_support.h linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/vc_support.h
+--- linux-3.12.6/arch/arm/mach-bcm2708/include/mach/vc_support.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/vc_support.h	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,69 @@
++#ifndef _VC_SUPPORT_H_
++#define _VC_SUPPORT_H_
++
++/*
++ * vc_support.h
++ *
++ *  Created on: 25 Nov 2012
++ *      Author: Simon
++ */
++
++enum {
++/*
++      If a MEM_HANDLE_T is discardable, the memory manager may resize it to size
++      0 at any time when it is not locked or retained.
++   */
++   MEM_FLAG_DISCARDABLE = 1 << 0,
++
++   /*
++      If a MEM_HANDLE_T is allocating (or normal), its block of memory will be
++      accessed in an allocating fashion through the cache.
++   */
++   MEM_FLAG_NORMAL = 0 << 2,
++   MEM_FLAG_ALLOCATING = MEM_FLAG_NORMAL,
++
++   /*
++      If a MEM_HANDLE_T is direct, its block of memory will be accessed
++      directly, bypassing the cache.
++   */
++   MEM_FLAG_DIRECT = 1 << 2,
++
++   /*
++      If a MEM_HANDLE_T is coherent, its block of memory will be accessed in a
++      non-allocating fashion through the cache.
++   */
++   MEM_FLAG_COHERENT = 2 << 2,
++
++   /*
++      If a MEM_HANDLE_T is L1-nonallocating, its block of memory will be accessed by
++      the VPU in a fashion which is allocating in L2, but only coherent in L1.
++   */
++   MEM_FLAG_L1_NONALLOCATING = (MEM_FLAG_DIRECT | MEM_FLAG_COHERENT),
++
++   /*
++      If a MEM_HANDLE_T is zero'd, its contents are set to 0 rather than
++      MEM_HANDLE_INVALID on allocation and resize up.
++   */
++   MEM_FLAG_ZERO = 1 << 4,
++
++   /*
++      If a MEM_HANDLE_T is uninitialised, it will not be reset to a defined value
++      (either zero, or all 1's) on allocation.
++    */
++   MEM_FLAG_NO_INIT = 1 << 5,
++
++   /*
++      Hints.
++   */
++   MEM_FLAG_HINT_PERMALOCK = 1 << 6, /* Likely to be locked for long periods of time. */
++};
++
++unsigned int AllocateVcMemory(unsigned int *pHandle, unsigned int size, unsigned int alignment, unsigned int flags);
++unsigned int ReleaseVcMemory(unsigned int handle);
++unsigned int LockVcMemory(unsigned int *pBusAddress, unsigned int handle);
++unsigned int UnlockVcMemory(unsigned int handle);
++
++unsigned int ExecuteVcCode(unsigned int code,
++		unsigned int r0, unsigned int r1, unsigned int r2, unsigned int r3, unsigned int r4, unsigned int r5);
++
++#endif
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/include/mach/vmalloc.h linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/vmalloc.h
+--- linux-3.12.6/arch/arm/mach-bcm2708/include/mach/vmalloc.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/include/mach/vmalloc.h	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,20 @@
++/*
++ *  arch/arm/mach-bcm2708/include/mach/vmalloc.h
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++#define VMALLOC_END		(0xe8000000)
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/Kconfig linux-raspberry-pi/arch/arm/mach-bcm2708/Kconfig
+--- linux-3.12.6/arch/arm/mach-bcm2708/Kconfig	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/Kconfig	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,49 @@
++menu "Broadcom BCM2708 Implementations"
++	depends on ARCH_BCM2708
++
++config MACH_BCM2708
++	bool "Broadcom BCM2708 Development Platform"
++	select NEED_MACH_MEMORY_H
++	select NEED_MACH_IO_H
++	select CPU_V6
++	help
++	  Include support for the Broadcom(R) BCM2708 platform.
++
++config BCM2708_GPIO
++	bool "BCM2708 gpio support"
++	depends on MACH_BCM2708
++	select ARCH_REQUIRE_GPIOLIB
++        default y
++	help
++	  Include support for the Broadcom(R) BCM2708 gpio.
++
++config BCM2708_VCMEM
++	bool "Videocore Memory"
++	depends on MACH_BCM2708
++        default y
++        help
++          Helper for videocore memory access and total size allocation.
++
++config BCM2708_NOL2CACHE
++	bool "Videocore L2 cache disable"
++	depends on MACH_BCM2708
++        default n
++        help
++          Do not allow ARM to use GPU's L2 cache. Requires disable_l2cache in config.txt.
++
++config BCM2708_SPIDEV
++	bool "Bind spidev to SPI0 master"
++	depends on MACH_BCM2708
++	depends on SPI
++	default y
++	help
++	  Binds spidev driver to the SPI0 master
++
++config BCM2708_DMAER
++	tristate "BCM2708 DMA helper"
++	depends on MACH_BCM2708
++        default n
++        help
++          Enable DMA helper for accelerating X composition
++
++endmenu
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/Makefile linux-raspberry-pi/arch/arm/mach-bcm2708/Makefile
+--- linux-3.12.6/arch/arm/mach-bcm2708/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/Makefile	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,10 @@
++#
++# Makefile for the linux kernel.
++#
++
++obj-$(CONFIG_MACH_BCM2708) 	+= clock.o bcm2708.o armctrl.o vcio.o power.o dma.o
++obj-$(CONFIG_BCM2708_GPIO)	+= bcm2708_gpio.o
++obj-$(CONFIG_BCM2708_VCMEM)	+= vc_mem.o
++
++obj-$(CONFIG_BCM2708_DMAER)	+= dmaer_master.o
++dmaer_master-objs		:= dmaer.o vc_support.o
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/Makefile.boot linux-raspberry-pi/arch/arm/mach-bcm2708/Makefile.boot
+--- linux-3.12.6/arch/arm/mach-bcm2708/Makefile.boot	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/Makefile.boot	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,3 @@
++   zreladdr-y	:= 0x00008000
++params_phys-y	:= 0x00000100
++initrd_phys-y	:= 0x00800000
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/power.c linux-raspberry-pi/arch/arm/mach-bcm2708/power.c
+--- linux-3.12.6/arch/arm/mach-bcm2708/power.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/power.c	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,194 @@
++/*
++ *	 linux/arch/arm/mach-bcm2708/power.c
++ *
++ *	 Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This device provides a shared mechanism for controlling the power to
++ * VideoCore subsystems.
++ */
++
++#include <linux/module.h>
++#include <linux/semaphore.h>
++#include <linux/bug.h>
++#include <mach/power.h>
++#include <mach/vcio.h>
++#include <mach/arm_power.h>
++
++#define DRIVER_NAME "bcm2708_power"
++
++#define BCM_POWER_MAXCLIENTS 4
++#define BCM_POWER_NOCLIENT (1<<31)
++
++/* Some drivers expect there devices to be permanently powered */
++#define BCM_POWER_ALWAYS_ON (BCM_POWER_USB)
++
++#if 1
++#define DPRINTK printk
++#else
++#define DPRINTK if (0) printk
++#endif
++
++struct state_struct {
++	uint32_t global_request;
++	uint32_t client_request[BCM_POWER_MAXCLIENTS];
++	struct semaphore client_mutex;
++	struct semaphore mutex;
++} g_state;
++
++int bcm_power_open(BCM_POWER_HANDLE_T *handle)
++{
++	BCM_POWER_HANDLE_T i;
++	int ret = -EBUSY;
++
++	down(&g_state.client_mutex);
++
++	for (i = 0; i < BCM_POWER_MAXCLIENTS; i++) {
++		if (g_state.client_request[i] == BCM_POWER_NOCLIENT) {
++			g_state.client_request[i] = BCM_POWER_NONE;
++			*handle = i;
++			ret = 0;
++			break;
++		}
++	}
++
++	up(&g_state.client_mutex);
++
++	DPRINTK("bcm_power_open() -> %d\n", *handle);
++
++	return ret;
++}
++EXPORT_SYMBOL_GPL(bcm_power_open);
++
++int bcm_power_request(BCM_POWER_HANDLE_T handle, uint32_t request)
++{
++	int rc = 0;
++
++	DPRINTK("bcm_power_request(%d, %x)\n", handle, request);
++
++	if ((handle < BCM_POWER_MAXCLIENTS) &&
++	    (g_state.client_request[handle] != BCM_POWER_NOCLIENT)) {
++		if (down_interruptible(&g_state.mutex) != 0) {
++			DPRINTK("bcm_power_request -> interrupted\n");
++			return -EINTR;
++		}
++
++		if (request != g_state.client_request[handle]) {
++			uint32_t others_request = 0;
++			uint32_t global_request;
++			BCM_POWER_HANDLE_T i;
++
++			for (i = 0; i < BCM_POWER_MAXCLIENTS; i++) {
++				if (i != handle)
++					others_request |=
++					    g_state.client_request[i];
++			}
++			others_request &= ~BCM_POWER_NOCLIENT;
++
++			global_request = request | others_request;
++			if (global_request != g_state.global_request) {
++				uint32_t actual;
++
++				/* Send a request to VideoCore */
++				bcm_mailbox_write(MBOX_CHAN_POWER,
++						  global_request << 4);
++
++				/* Wait for a response during power-up */
++				if (global_request & ~g_state.global_request) {
++					rc = bcm_mailbox_read(MBOX_CHAN_POWER,
++							      &actual);
++					DPRINTK
++					    ("bcm_mailbox_read -> %08x, %d\n",
++					     actual, rc);
++					actual >>= 4;
++				} else {
++					rc = 0;
++					actual = global_request;
++				}
++
++				if (rc == 0) {
++					if (actual != global_request) {
++						printk(KERN_ERR
++						     "%s: prev global %x, new global %x, actual %x, request %x, others_request %x\n",
++						     __func__,
++						     g_state.global_request,
++						     global_request, actual, request, others_request);
++						/* A failure */
++						BUG_ON((others_request & actual)
++						       != others_request);
++						request &= actual;
++						rc = -EIO;
++					}
++
++					g_state.global_request = actual;
++					g_state.client_request[handle] =
++					    request;
++				}
++			}
++		}
++		up(&g_state.mutex);
++	} else {
++		rc = -EINVAL;
++	}
++	DPRINTK("bcm_power_request -> %d\n", rc);
++	return rc;
++}
++EXPORT_SYMBOL_GPL(bcm_power_request);
++
++int bcm_power_close(BCM_POWER_HANDLE_T handle)
++{
++	int rc;
++
++	DPRINTK("bcm_power_close(%d)\n", handle);
++
++	rc = bcm_power_request(handle, BCM_POWER_NONE);
++	if (rc == 0)
++		g_state.client_request[handle] = BCM_POWER_NOCLIENT;
++
++	return rc;
++}
++EXPORT_SYMBOL_GPL(bcm_power_close);
++
++static int __init bcm_power_init(void)
++{
++#if defined(BCM_POWER_ALWAYS_ON)
++	BCM_POWER_HANDLE_T always_on_handle;
++#endif
++	int rc = 0;
++	int i;
++
++	printk(KERN_INFO "bcm_power: Broadcom power driver\n");
++	bcm_mailbox_write(MBOX_CHAN_POWER, 0);
++
++	for (i = 0; i < BCM_POWER_MAXCLIENTS; i++)
++		g_state.client_request[i] = BCM_POWER_NOCLIENT;
++
++	sema_init(&g_state.client_mutex, 1);
++	sema_init(&g_state.mutex, 1);
++
++	g_state.global_request = 0;
++
++#if defined(BCM_POWER_ALWAYS_ON)
++	if (BCM_POWER_ALWAYS_ON) {
++		bcm_power_open(&always_on_handle);
++		bcm_power_request(always_on_handle, BCM_POWER_ALWAYS_ON);
++	}
++#endif
++
++	return rc;
++}
++
++static void __exit bcm_power_exit(void)
++{
++	bcm_mailbox_write(MBOX_CHAN_POWER, 0);
++}
++
++arch_initcall(bcm_power_init);	/* Initialize early */
++module_exit(bcm_power_exit);
++
++MODULE_AUTHOR("Phil Elwell");
++MODULE_DESCRIPTION("Interface to BCM2708 power management");
++MODULE_LICENSE("GPL");
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/vcio.c linux-raspberry-pi/arch/arm/mach-bcm2708/vcio.c
+--- linux-3.12.6/arch/arm/mach-bcm2708/vcio.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/vcio.c	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,474 @@
++/*
++ *  linux/arch/arm/mach-bcm2708/vcio.c
++ *
++ *  Copyright (C) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This device provides a shared mechanism for writing to the mailboxes,
++ * semaphores, doorbells etc. that are shared between the ARM and the
++ * VideoCore processor
++ */
++
++#if defined(CONFIG_SERIAL_BCM_MBOX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
++#define SUPPORT_SYSRQ
++#endif
++
++#include <linux/module.h>
++#include <linux/console.h>
++#include <linux/serial_core.h>
++#include <linux/serial.h>
++#include <linux/errno.h>
++#include <linux/device.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/dma-mapping.h>
++#include <linux/platform_device.h>
++#include <linux/sysrq.h>
++#include <linux/delay.h>
++#include <linux/slab.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++
++#include <linux/io.h>
++
++#include <mach/vcio.h>
++#include <mach/platform.h>
++
++#include <asm/uaccess.h>
++
++
++#define DRIVER_NAME BCM_VCIO_DRIVER_NAME
++
++/* ----------------------------------------------------------------------
++ *	Mailbox
++ * -------------------------------------------------------------------- */
++
++/* offsets from a mail box base address */
++#define MAIL_WRT	0x00	/* write - and next 4 words */
++#define MAIL_RD		0x00	/* read - and next 4 words */
++#define MAIL_POL	0x10	/* read without popping the fifo */
++#define MAIL_SND	0x14	/* sender ID (bottom two bits) */
++#define MAIL_STA	0x18	/* status */
++#define MAIL_CNF	0x1C	/* configuration */
++
++#define MBOX_MSG(chan, data28)		(((data28) & ~0xf) | ((chan) & 0xf))
++#define MBOX_MSG_LSB(chan, data28) (((data28) << 4) | ((chan) & 0xf))
++#define MBOX_CHAN(msg)			((msg) & 0xf)
++#define MBOX_DATA28(msg)		((msg) & ~0xf)
++#define MBOX_DATA28_LSB(msg)		(((uint32_t)msg) >> 4)
++
++#define MBOX_MAGIC 0xd0d0c0de
++
++struct vc_mailbox {
++	struct device *dev;	/* parent device */
++	void __iomem *status;
++	void __iomem *config;
++	void __iomem *read;
++	void __iomem *write;
++	uint32_t msg[MBOX_CHAN_COUNT];
++	struct semaphore sema[MBOX_CHAN_COUNT];
++	uint32_t magic;
++};
++
++static void mbox_init(struct vc_mailbox *mbox_out, struct device *dev,
++		      uint32_t addr_mbox)
++{
++	int i;
++
++	mbox_out->dev = dev;
++	mbox_out->status = __io_address(addr_mbox + MAIL_STA);
++	mbox_out->config = __io_address(addr_mbox + MAIL_CNF);
++	mbox_out->read = __io_address(addr_mbox + MAIL_RD);
++	/* Write to the other mailbox */
++	mbox_out->write =
++	    __io_address((addr_mbox ^ ARM_0_MAIL0_WRT ^ ARM_0_MAIL1_WRT) +
++			 MAIL_WRT);
++
++	for (i = 0; i < MBOX_CHAN_COUNT; i++) {
++		mbox_out->msg[i] = 0;
++		sema_init(&mbox_out->sema[i], 0);
++	}
++
++	/* Enable the interrupt on data reception */
++	writel(ARM_MC_IHAVEDATAIRQEN, mbox_out->config);
++
++	mbox_out->magic = MBOX_MAGIC;
++}
++
++static int mbox_write(struct vc_mailbox *mbox, unsigned chan, uint32_t data28)
++{
++	int rc;
++
++	if (mbox->magic != MBOX_MAGIC)
++		rc = -EINVAL;
++	else {
++		/* wait for the mailbox FIFO to have some space in it */
++		while (0 != (readl(mbox->status) & ARM_MS_FULL))
++			cpu_relax();
++
++		writel(MBOX_MSG(chan, data28), mbox->write);
++		rc = 0;
++	}
++	return rc;
++}
++
++static int mbox_read(struct vc_mailbox *mbox, unsigned chan, uint32_t *data28)
++{
++	int rc;
++
++	if (mbox->magic != MBOX_MAGIC)
++		rc = -EINVAL;
++	else {
++		down(&mbox->sema[chan]);
++		*data28 = MBOX_DATA28(mbox->msg[chan]);
++		mbox->msg[chan] = 0;
++		rc = 0;
++	}
++	return rc;
++}
++
++static irqreturn_t mbox_irq(int irq, void *dev_id)
++{
++	/* wait for the mailbox FIFO to have some data in it */
++	struct vc_mailbox *mbox = (struct vc_mailbox *) dev_id;
++	int status = readl(mbox->status);
++	int ret = IRQ_NONE;
++
++	while (!(status & ARM_MS_EMPTY)) {
++		uint32_t msg = readl(mbox->read);
++		int chan = MBOX_CHAN(msg);
++		if (chan < MBOX_CHAN_COUNT) {
++			if (mbox->msg[chan]) {
++				/* Overflow */
++				printk(KERN_ERR DRIVER_NAME
++				       ": mbox chan %d overflow - drop %08x\n",
++				       chan, msg);
++			} else {
++				mbox->msg[chan] = (msg | 0xf);
++				up(&mbox->sema[chan]);
++			}
++		} else {
++			printk(KERN_ERR DRIVER_NAME
++			       ": invalid channel selector (msg %08x)\n", msg);
++		}
++		ret = IRQ_HANDLED;
++		status = readl(mbox->status);
++	}
++	return ret;
++}
++
++static struct irqaction mbox_irqaction = {
++	.name = "ARM Mailbox IRQ",
++	.flags = IRQF_DISABLED | IRQF_IRQPOLL,
++	.handler = mbox_irq,
++};
++
++/* ----------------------------------------------------------------------
++ *	Mailbox Methods
++ * -------------------------------------------------------------------- */
++
++static struct device *mbox_dev;	/* we assume there's only one! */
++
++static int dev_mbox_write(struct device *dev, unsigned chan, uint32_t data28)
++{
++	int rc;
++
++	struct vc_mailbox *mailbox = dev_get_drvdata(dev);
++	device_lock(dev);
++	rc = mbox_write(mailbox, chan, data28);
++	device_unlock(dev);
++
++	return rc;
++}
++
++static int dev_mbox_read(struct device *dev, unsigned chan, uint32_t *data28)
++{
++	int rc;
++
++	struct vc_mailbox *mailbox = dev_get_drvdata(dev);
++	device_lock(dev);
++	rc = mbox_read(mailbox, chan, data28);
++	device_unlock(dev);
++
++	return rc;
++}
++
++extern int bcm_mailbox_write(unsigned chan, uint32_t data28)
++{
++	if (mbox_dev)
++		return dev_mbox_write(mbox_dev, chan, data28);
++	else
++		return -ENODEV;
++}
++EXPORT_SYMBOL_GPL(bcm_mailbox_write);
++
++extern int bcm_mailbox_read(unsigned chan, uint32_t *data28)
++{
++	if (mbox_dev)
++		return dev_mbox_read(mbox_dev, chan, data28);
++	else
++		return -ENODEV;
++}
++EXPORT_SYMBOL_GPL(bcm_mailbox_read);
++
++static void dev_mbox_register(const char *dev_name, struct device *dev)
++{
++	mbox_dev = dev;
++}
++
++static int mbox_copy_from_user(void *dst, const void *src, int size)
++{
++	if ( (uint32_t)src < TASK_SIZE)
++	{
++		return copy_from_user(dst, src, size);
++	}
++	else
++	{
++		memcpy( dst, src, size );
++		return 0;
++	}
++}
++
++static int mbox_copy_to_user(void *dst, const void *src, int size)
++{
++	if ( (uint32_t)dst < TASK_SIZE)
++	{
++		return copy_to_user(dst, src, size);
++	}
++	else
++	{
++		memcpy( dst, src, size );
++		return 0;
++	}
++}
++
++static DEFINE_MUTEX(mailbox_lock);
++extern int bcm_mailbox_property(void *data, int size)
++{
++	uint32_t success;
++	dma_addr_t mem_bus;				/* the memory address accessed from videocore */
++	void *mem_kern;					/* the memory address accessed from driver */
++	int s = 0;
++
++        mutex_lock(&mailbox_lock);
++	/* allocate some memory for the messages communicating with GPU */
++	mem_kern = dma_alloc_coherent(NULL, PAGE_ALIGN(size), &mem_bus, GFP_ATOMIC);
++	if (mem_kern) {
++		/* create the message */
++		mbox_copy_from_user(mem_kern, data, size);
++
++		/* send the message */
++		wmb();
++		s = bcm_mailbox_write(MBOX_CHAN_PROPERTY, (uint32_t)mem_bus);
++		if (s == 0) {
++			s = bcm_mailbox_read(MBOX_CHAN_PROPERTY, &success);
++		}
++		if (s == 0) {
++			/* copy the response */
++			rmb();
++			mbox_copy_to_user(data, mem_kern, size);
++		}
++		dma_free_coherent(NULL, PAGE_ALIGN(size), mem_kern, mem_bus);
++	} else {
++		s = -ENOMEM;
++	}
++	if (s != 0)
++		printk(KERN_ERR DRIVER_NAME ": %s failed (%d)\n", __func__, s);
++
++        mutex_unlock(&mailbox_lock);
++	return s;
++}
++EXPORT_SYMBOL_GPL(bcm_mailbox_property);
++
++/* ----------------------------------------------------------------------
++ *	Platform Device for Mailbox
++ * -------------------------------------------------------------------- */
++
++/*
++ * Is the device open right now? Used to prevent
++ * concurent access into the same device
++ */
++static int Device_Open = 0;
++
++/*
++ * This is called whenever a process attempts to open the device file
++ */
++static int device_open(struct inode *inode, struct file *file)
++{
++	/*
++	 * We don't want to talk to two processes at the same time
++	 */
++	if (Device_Open)
++		return -EBUSY;
++
++	Device_Open++;
++	/*
++	 * Initialize the message
++	 */
++	try_module_get(THIS_MODULE);
++	return 0;
++}
++
++static int device_release(struct inode *inode, struct file *file)
++{
++	/*
++	 * We're now ready for our next caller
++	 */
++	Device_Open--;
++
++	module_put(THIS_MODULE);
++	return 0;
++}
++
++/*
++ * This function is called whenever a process tries to do an ioctl on our
++ * device file. We get two extra parameters (additional to the inode and file
++ * structures, which all device functions get): the number of the ioctl called
++ * and the parameter given to the ioctl function.
++ *
++ * If the ioctl is write or read/write (meaning output is returned to the
++ * calling process), the ioctl call returns the output of this function.
++ *
++ */
++static long device_ioctl(struct file *file,	/* see include/linux/fs.h */
++		 unsigned int ioctl_num,	/* number and param for ioctl */
++		 unsigned long ioctl_param)
++{
++	unsigned size;
++	/*
++	 * Switch according to the ioctl called
++	 */
++	switch (ioctl_num) {
++	case IOCTL_MBOX_PROPERTY:
++		/*
++		 * Receive a pointer to a message (in user space) and set that
++		 * to be the device's message.  Get the parameter given to
++		 * ioctl by the process.
++		 */
++		mbox_copy_from_user(&size, (void *)ioctl_param, sizeof size);
++		return bcm_mailbox_property((void *)ioctl_param, size);
++		break;
++	default:
++		printk(KERN_ERR DRIVER_NAME "unknown ioctl: %d\n", ioctl_num);
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++/* Module Declarations */
++
++/*
++ * This structure will hold the functions to be called
++ * when a process does something to the device we
++ * created. Since a pointer to this structure is kept in
++ * the devices table, it can't be local to
++ * init_module. NULL is for unimplemented functios.
++ */
++struct file_operations fops = {
++	.unlocked_ioctl = device_ioctl,
++	.open = device_open,
++	.release = device_release,	/* a.k.a. close */
++};
++
++static int bcm_vcio_probe(struct platform_device *pdev)
++{
++	int ret = 0;
++	struct vc_mailbox *mailbox;
++
++	mailbox = kzalloc(sizeof(*mailbox), GFP_KERNEL);
++	if (NULL == mailbox) {
++		printk(KERN_ERR DRIVER_NAME ": failed to allocate "
++		       "mailbox memory\n");
++		ret = -ENOMEM;
++	} else {
++		struct resource *res;
++
++		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++		if (res == NULL) {
++			printk(KERN_ERR DRIVER_NAME ": failed to obtain memory "
++			       "resource\n");
++			ret = -ENODEV;
++			kfree(mailbox);
++		} else {
++			/* should be based on the registers from res really */
++			mbox_init(mailbox, &pdev->dev, ARM_0_MAIL0_RD);
++
++			platform_set_drvdata(pdev, mailbox);
++			dev_mbox_register(DRIVER_NAME, &pdev->dev);
++
++			mbox_irqaction.dev_id = mailbox;
++			setup_irq(IRQ_ARM_MAILBOX, &mbox_irqaction);
++			printk(KERN_INFO DRIVER_NAME ": mailbox at %p\n",
++			       __io_address(ARM_0_MAIL0_RD));
++		}
++	}
++
++	if (ret == 0) {
++		/*
++		 * Register the character device
++		 */
++		ret = register_chrdev(MAJOR_NUM, DEVICE_FILE_NAME, &fops);
++
++		/*
++		 * Negative values signify an error
++		 */
++		if (ret < 0) {
++			printk(KERN_ERR DRIVER_NAME
++			       "Failed registering the character device %d\n", ret);
++			return ret;
++		}
++	}
++	return ret;
++}
++
++static int bcm_vcio_remove(struct platform_device *pdev)
++{
++	struct vc_mailbox *mailbox = platform_get_drvdata(pdev);
++
++	platform_set_drvdata(pdev, NULL);
++	kfree(mailbox);
++
++	return 0;
++}
++
++static struct platform_driver bcm_mbox_driver = {
++	.probe = bcm_vcio_probe,
++	.remove = bcm_vcio_remove,
++
++	.driver = {
++		   .name = DRIVER_NAME,
++		   .owner = THIS_MODULE,
++		   },
++};
++
++static int __init bcm_mbox_init(void)
++{
++	int ret;
++
++	printk(KERN_INFO "mailbox: Broadcom VideoCore Mailbox driver\n");
++
++	ret = platform_driver_register(&bcm_mbox_driver);
++	if (ret != 0) {
++		printk(KERN_ERR DRIVER_NAME ": failed to register "
++		       "on platform\n");
++	}
++
++	return ret;
++}
++
++static void __exit bcm_mbox_exit(void)
++{
++	platform_driver_unregister(&bcm_mbox_driver);
++}
++
++arch_initcall(bcm_mbox_init);	/* Initialize early */
++module_exit(bcm_mbox_exit);
++
++MODULE_AUTHOR("Gray Girling");
++MODULE_DESCRIPTION("ARM I/O to VideoCore processor");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:bcm-mbox");
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/vc_mem.c linux-raspberry-pi/arch/arm/mach-bcm2708/vc_mem.c
+--- linux-3.12.6/arch/arm/mach-bcm2708/vc_mem.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/vc_mem.c	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,462 @@
++/*****************************************************************************
++* Copyright 2010 - 2011 Broadcom Corporation.  All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/fs.h>
++#include <linux/device.h>
++#include <linux/cdev.h>
++#include <linux/mm.h>
++#include <linux/slab.h>
++#include <linux/proc_fs.h>
++#include <asm/uaccess.h>
++#include <linux/dma-mapping.h>
++
++#ifdef CONFIG_ARCH_KONA
++#include <chal/chal_ipc.h>
++#elif CONFIG_ARCH_BCM2708
++#else
++#include <csp/chal_ipc.h>
++#endif
++
++#include "mach/vc_mem.h"
++#include <mach/vcio.h>
++
++#define DRIVER_NAME  "vc-mem"
++
++// Uncomment to enable debug logging
++// #define ENABLE_DBG
++
++#if defined(ENABLE_DBG)
++#define LOG_DBG( fmt, ... )  printk( KERN_INFO fmt "\n", ##__VA_ARGS__ )
++#else
++#define LOG_DBG( fmt, ... )
++#endif
++#define LOG_ERR( fmt, ... )  printk( KERN_ERR fmt "\n", ##__VA_ARGS__ )
++
++// Device (/dev) related variables
++static dev_t vc_mem_devnum = 0;
++static struct class *vc_mem_class = NULL;
++static struct cdev vc_mem_cdev;
++static int vc_mem_inited = 0;
++
++// Proc entry
++static struct proc_dir_entry *vc_mem_proc_entry;
++
++/*
++ * Videocore memory addresses and size
++ *
++ * Drivers that wish to know the videocore memory addresses and sizes should
++ * use these variables instead of the MM_IO_BASE and MM_ADDR_IO defines in
++ * headers. This allows the other drivers to not be tied down to a a certain
++ * address/size at compile time.
++ *
++ * In the future, the goal is to have the videocore memory virtual address and
++ * size be calculated at boot time rather than at compile time. The decision of
++ * where the videocore memory resides and its size would be in the hands of the
++ * bootloader (and/or kernel). When that happens, the values of these variables
++ * would be calculated and assigned in the init function.
++ */
++// in the 2835 VC in mapped above ARM, but ARM has full access to VC space
++unsigned long mm_vc_mem_phys_addr = 0x00000000;
++unsigned int mm_vc_mem_size = 0;
++unsigned int mm_vc_mem_base = 0;
++
++EXPORT_SYMBOL(mm_vc_mem_phys_addr);
++EXPORT_SYMBOL(mm_vc_mem_size);
++EXPORT_SYMBOL(mm_vc_mem_base);
++
++static uint phys_addr = 0;
++static uint mem_size = 0;
++static uint mem_base = 0;
++
++
++/****************************************************************************
++*
++*   vc_mem_open
++*
++***************************************************************************/
++
++static int
++vc_mem_open(struct inode *inode, struct file *file)
++{
++	(void) inode;
++	(void) file;
++
++	LOG_DBG("%s: called file = 0x%p", __func__, file);
++
++	return 0;
++}
++
++/****************************************************************************
++*
++*   vc_mem_release
++*
++***************************************************************************/
++
++static int
++vc_mem_release(struct inode *inode, struct file *file)
++{
++	(void) inode;
++	(void) file;
++
++	LOG_DBG("%s: called file = 0x%p", __func__, file);
++
++	return 0;
++}
++
++/****************************************************************************
++*
++*   vc_mem_get_size
++*
++***************************************************************************/
++
++static void
++vc_mem_get_size(void)
++{
++}
++
++/****************************************************************************
++*
++*   vc_mem_get_base
++*
++***************************************************************************/
++
++static void
++vc_mem_get_base(void)
++{
++}
++
++/****************************************************************************
++*
++*   vc_mem_get_current_size
++*
++***************************************************************************/
++
++int
++vc_mem_get_current_size(void)
++{
++	return mm_vc_mem_size;
++}
++
++EXPORT_SYMBOL_GPL(vc_mem_get_current_size);
++
++/****************************************************************************
++*
++*   vc_mem_ioctl
++*
++***************************************************************************/
++
++static long
++vc_mem_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
++{
++	int rc = 0;
++
++	(void) cmd;
++	(void) arg;
++
++	LOG_DBG("%s: called file = 0x%p", __func__, file);
++
++	switch (cmd) {
++	case VC_MEM_IOC_MEM_PHYS_ADDR:
++		{
++			LOG_DBG("%s: VC_MEM_IOC_MEM_PHYS_ADDR=0x%p",
++				__func__, (void *) mm_vc_mem_phys_addr);
++
++			if (copy_to_user((void *) arg, &mm_vc_mem_phys_addr,
++					 sizeof (mm_vc_mem_phys_addr)) != 0) {
++				rc = -EFAULT;
++			}
++			break;
++		}
++	case VC_MEM_IOC_MEM_SIZE:
++		{
++			// Get the videocore memory size first
++			vc_mem_get_size();
++
++			LOG_DBG("%s: VC_MEM_IOC_MEM_SIZE=%u", __func__,
++				mm_vc_mem_size);
++
++			if (copy_to_user((void *) arg, &mm_vc_mem_size,
++					 sizeof (mm_vc_mem_size)) != 0) {
++				rc = -EFAULT;
++			}
++			break;
++		}
++	case VC_MEM_IOC_MEM_BASE:
++		{
++			// Get the videocore memory base
++			vc_mem_get_base();
++
++			LOG_DBG("%s: VC_MEM_IOC_MEM_BASE=%u", __func__,
++				mm_vc_mem_base);
++
++			if (copy_to_user((void *) arg, &mm_vc_mem_base,
++					 sizeof (mm_vc_mem_base)) != 0) {
++				rc = -EFAULT;
++			}
++			break;
++		}
++	case VC_MEM_IOC_MEM_LOAD:
++		{
++			// Get the videocore memory base
++			vc_mem_get_base();
++
++			LOG_DBG("%s: VC_MEM_IOC_MEM_LOAD=%u", __func__,
++				mm_vc_mem_base);
++
++			if (copy_to_user((void *) arg, &mm_vc_mem_base,
++					 sizeof (mm_vc_mem_base)) != 0) {
++				rc = -EFAULT;
++			}
++			break;
++		}
++	default:
++		{
++			return -ENOTTY;
++		}
++	}
++	LOG_DBG("%s: file = 0x%p returning %d", __func__, file, rc);
++
++	return rc;
++}
++
++/****************************************************************************
++*
++*   vc_mem_mmap
++*
++***************************************************************************/
++
++static int
++vc_mem_mmap(struct file *filp, struct vm_area_struct *vma)
++{
++	int rc = 0;
++	unsigned long length = vma->vm_end - vma->vm_start;
++	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
++
++	LOG_DBG("%s: vm_start = 0x%08lx vm_end = 0x%08lx vm_pgoff = 0x%08lx",
++		__func__, (long) vma->vm_start, (long) vma->vm_end,
++		(long) vma->vm_pgoff);
++
++	if (offset + length > mm_vc_mem_size) {
++		LOG_ERR("%s: length %ld is too big", __func__, length);
++		return -EINVAL;
++	}
++	// Do not cache the memory map
++	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
++
++	rc = remap_pfn_range(vma, vma->vm_start,
++			     (mm_vc_mem_phys_addr >> PAGE_SHIFT) +
++			     vma->vm_pgoff, length, vma->vm_page_prot);
++	if (rc != 0) {
++		LOG_ERR("%s: remap_pfn_range failed (rc=%d)", __func__, rc);
++	}
++
++	return rc;
++}
++
++/****************************************************************************
++*
++*   File Operations for the driver.
++*
++***************************************************************************/
++
++static const struct file_operations vc_mem_fops = {
++	.owner = THIS_MODULE,
++	.open = vc_mem_open,
++	.release = vc_mem_release,
++	.unlocked_ioctl = vc_mem_ioctl,
++	.mmap = vc_mem_mmap,
++};
++
++/****************************************************************************
++*
++*   vc_mem_proc_read
++*
++***************************************************************************/
++
++static int
++vc_mem_proc_read(char *buf, char **start, off_t offset, int count, int *eof,
++		 void *data)
++{
++	char *p = buf;
++
++	(void) start;
++	(void) count;
++	(void) data;
++
++	if (offset > 0) {
++		*eof = 1;
++		return 0;
++	}
++	// Get the videocore memory size first
++	vc_mem_get_size();
++
++	p += sprintf(p, "Videocore memory:\n");
++	if (mm_vc_mem_phys_addr != 0)
++		p += sprintf(p, "   Physical address: 0x%p\n",
++			     (void *) mm_vc_mem_phys_addr);
++	else
++		p += sprintf(p, "   Physical address: 0x00000000\n");
++	p += sprintf(p, "   Length (bytes):   %u\n", mm_vc_mem_size);
++
++	*eof = 1;
++	return p - buf;
++}
++
++/****************************************************************************
++*
++*   vc_mem_proc_write
++*
++***************************************************************************/
++
++static int
++vc_mem_proc_write(struct file *file, const char __user * buffer,
++		  unsigned long count, void *data)
++{
++	int rc = -EFAULT;
++	char input_str[10];
++
++	memset(input_str, 0, sizeof (input_str));
++
++	if (count > sizeof (input_str)) {
++		LOG_ERR("%s: input string length too long", __func__);
++		goto out;
++	}
++
++	if (copy_from_user(input_str, buffer, count - 1)) {
++		LOG_ERR("%s: failed to get input string", __func__);
++		goto out;
++	}
++
++	if (strncmp(input_str, "connect", strlen("connect")) == 0) {
++		// Get the videocore memory size from the videocore
++		vc_mem_get_size();
++	}
++
++      out:
++	return rc;
++}
++
++/****************************************************************************
++*
++*   vc_mem_init
++*
++***************************************************************************/
++
++static int __init
++vc_mem_init(void)
++{
++	int rc = -EFAULT;
++	struct device *dev;
++
++	LOG_DBG("%s: called", __func__);
++
++	mm_vc_mem_phys_addr = phys_addr;
++	mm_vc_mem_size = mem_size;
++	mm_vc_mem_base = mem_base;
++
++	vc_mem_get_size();
++
++	printk("vc-mem: phys_addr:0x%08lx mem_base=0x%08x mem_size:0x%08x(%u MiB)\n",
++		mm_vc_mem_phys_addr, mm_vc_mem_base, mm_vc_mem_size, mm_vc_mem_size / (1024 * 1024));
++
++	if ((rc = alloc_chrdev_region(&vc_mem_devnum, 0, 1, DRIVER_NAME)) < 0) {
++		LOG_ERR("%s: alloc_chrdev_region failed (rc=%d)", __func__, rc);
++		goto out_err;
++	}
++
++	cdev_init(&vc_mem_cdev, &vc_mem_fops);
++	if ((rc = cdev_add(&vc_mem_cdev, vc_mem_devnum, 1)) != 0) {
++		LOG_ERR("%s: cdev_add failed (rc=%d)", __func__, rc);
++		goto out_unregister;
++	}
++
++	vc_mem_class = class_create(THIS_MODULE, DRIVER_NAME);
++	if (IS_ERR(vc_mem_class)) {
++		rc = PTR_ERR(vc_mem_class);
++		LOG_ERR("%s: class_create failed (rc=%d)", __func__, rc);
++		goto out_cdev_del;
++	}
++
++	dev = device_create(vc_mem_class, NULL, vc_mem_devnum, NULL,
++			    DRIVER_NAME);
++	if (IS_ERR(dev)) {
++		rc = PTR_ERR(dev);
++		LOG_ERR("%s: device_create failed (rc=%d)", __func__, rc);
++		goto out_class_destroy;
++	}
++
++#if 0
++	vc_mem_proc_entry = create_proc_entry(DRIVER_NAME, 0444, NULL);
++	if (vc_mem_proc_entry == NULL) {
++		rc = -EFAULT;
++		LOG_ERR("%s: create_proc_entry failed", __func__);
++		goto out_device_destroy;
++	}
++	vc_mem_proc_entry->read_proc = vc_mem_proc_read;
++	vc_mem_proc_entry->write_proc = vc_mem_proc_write;
++#endif
++
++	vc_mem_inited = 1;
++	return 0;
++
++      out_device_destroy:
++	device_destroy(vc_mem_class, vc_mem_devnum);
++
++      out_class_destroy:
++	class_destroy(vc_mem_class);
++	vc_mem_class = NULL;
++
++      out_cdev_del:
++	cdev_del(&vc_mem_cdev);
++
++      out_unregister:
++	unregister_chrdev_region(vc_mem_devnum, 1);
++
++      out_err:
++	return -1;
++}
++
++/****************************************************************************
++*
++*   vc_mem_exit
++*
++***************************************************************************/
++
++static void __exit
++vc_mem_exit(void)
++{
++	LOG_DBG("%s: called", __func__);
++
++	if (vc_mem_inited) {
++#if 0
++		remove_proc_entry(vc_mem_proc_entry->name, NULL);
++#endif
++		device_destroy(vc_mem_class, vc_mem_devnum);
++		class_destroy(vc_mem_class);
++		cdev_del(&vc_mem_cdev);
++		unregister_chrdev_region(vc_mem_devnum, 1);
++	}
++}
++
++module_init(vc_mem_init);
++module_exit(vc_mem_exit);
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Broadcom Corporation");
++
++module_param(phys_addr, uint, 0644);
++module_param(mem_size, uint, 0644);
++module_param(mem_base, uint, 0644);
++
+diff -Nur linux-3.12.6/arch/arm/mach-bcm2708/vc_support.c linux-raspberry-pi/arch/arm/mach-bcm2708/vc_support.c
+--- linux-3.12.6/arch/arm/mach-bcm2708/vc_support.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mach-bcm2708/vc_support.c	2013-12-29 10:40:21.000000000 +0100
+@@ -0,0 +1,318 @@
++/*
++ * vc_support.c
++ *
++ *  Created on: 25 Nov 2012
++ *      Author: Simon
++ */
++
++#include <linux/module.h>
++#include <mach/vcio.h>
++
++#ifdef ECLIPSE_IGNORE
++
++#define __user
++#define __init
++#define __exit
++#define __iomem
++#define KERN_DEBUG
++#define KERN_ERR
++#define KERN_WARNING
++#define KERN_INFO
++#define _IOWR(a, b, c) b
++#define _IOW(a, b, c) b
++#define _IO(a, b) b
++
++#endif
++
++/****** VC MAILBOX FUNCTIONALITY ******/
++unsigned int AllocateVcMemory(unsigned int *pHandle, unsigned int size, unsigned int alignment, unsigned int flags)
++{
++	struct vc_msg
++	{
++		unsigned int m_msgSize;
++		unsigned int m_response;
++
++		struct vc_tag
++		{
++			unsigned int m_tagId;
++			unsigned int m_sendBufferSize;
++			union {
++				unsigned int m_sendDataSize;
++				unsigned int m_recvDataSize;
++			};
++
++			struct args
++			{
++				union {
++					unsigned int m_size;
++					unsigned int m_handle;
++				};
++				unsigned int m_alignment;
++				unsigned int m_flags;
++			} m_args;
++		} m_tag;
++
++		unsigned int m_endTag;
++	} msg;
++	int s;
++
++	msg.m_msgSize = sizeof(msg);
++	msg.m_response = 0;
++	msg.m_endTag = 0;
++
++	//fill in the tag for the allocation command
++	msg.m_tag.m_tagId = 0x3000c;
++	msg.m_tag.m_sendBufferSize = 12;
++	msg.m_tag.m_sendDataSize = 12;
++
++	//fill in our args
++	msg.m_tag.m_args.m_size = size;
++	msg.m_tag.m_args.m_alignment = alignment;
++	msg.m_tag.m_args.m_flags = flags;
++
++	//run the command
++	s = bcm_mailbox_property(&msg, sizeof(msg));
++
++	if (s == 0 && msg.m_response == 0x80000000 && msg.m_tag.m_recvDataSize == 0x80000004)
++	{
++		*pHandle = msg.m_tag.m_args.m_handle;
++		return 0;
++	}
++	else
++	{
++		printk(KERN_ERR "failed to allocate vc memory: s=%d response=%08x recv data size=%08x\n",
++				s, msg.m_response, msg.m_tag.m_recvDataSize);
++		return 1;
++	}
++}
++
++unsigned int ReleaseVcMemory(unsigned int handle)
++{
++	struct vc_msg
++	{
++		unsigned int m_msgSize;
++		unsigned int m_response;
++
++		struct vc_tag
++		{
++			unsigned int m_tagId;
++			unsigned int m_sendBufferSize;
++			union {
++				unsigned int m_sendDataSize;
++				unsigned int m_recvDataSize;
++			};
++
++			struct args
++			{
++				union {
++					unsigned int m_handle;
++					unsigned int m_error;
++				};
++			} m_args;
++		} m_tag;
++
++		unsigned int m_endTag;
++	} msg;
++	int s;
++
++	msg.m_msgSize = sizeof(msg);
++	msg.m_response = 0;
++	msg.m_endTag = 0;
++
++	//fill in the tag for the release command
++	msg.m_tag.m_tagId = 0x3000f;
++	msg.m_tag.m_sendBufferSize = 4;
++	msg.m_tag.m_sendDataSize = 4;
++
++	//pass across the handle
++	msg.m_tag.m_args.m_handle = handle;
++
++	s = bcm_mailbox_property(&msg, sizeof(msg));
++
++	if (s == 0 && msg.m_response == 0x80000000 && msg.m_tag.m_recvDataSize == 0x80000004 && msg.m_tag.m_args.m_error == 0)
++		return 0;
++	else
++	{
++		printk(KERN_ERR "failed to release vc memory: s=%d response=%08x recv data size=%08x error=%08x\n",
++				s, msg.m_response, msg.m_tag.m_recvDataSize, msg.m_tag.m_args.m_error);
++		return 1;
++	}
++}
++
++unsigned int LockVcMemory(unsigned int *pBusAddress, unsigned int handle)
++{
++	struct vc_msg
++	{
++		unsigned int m_msgSize;
++		unsigned int m_response;
++
++		struct vc_tag
++		{
++			unsigned int m_tagId;
++			unsigned int m_sendBufferSize;
++			union {
++				unsigned int m_sendDataSize;
++				unsigned int m_recvDataSize;
++			};
++
++			struct args
++			{
++				union {
++					unsigned int m_handle;
++					unsigned int m_busAddress;
++				};
++			} m_args;
++		} m_tag;
++
++		unsigned int m_endTag;
++	} msg;
++	int s;
++
++	msg.m_msgSize = sizeof(msg);
++	msg.m_response = 0;
++	msg.m_endTag = 0;
++
++	//fill in the tag for the lock command
++	msg.m_tag.m_tagId = 0x3000d;
++	msg.m_tag.m_sendBufferSize = 4;
++	msg.m_tag.m_sendDataSize = 4;
++
++	//pass across the handle
++	msg.m_tag.m_args.m_handle = handle;
++
++	s = bcm_mailbox_property(&msg, sizeof(msg));
++
++	if (s == 0 && msg.m_response == 0x80000000 && msg.m_tag.m_recvDataSize == 0x80000004)
++	{
++		//pick out the bus address
++		*pBusAddress = msg.m_tag.m_args.m_busAddress;
++		return 0;
++	}
++	else
++	{
++		printk(KERN_ERR "failed to lock vc memory: s=%d response=%08x recv data size=%08x\n",
++				s, msg.m_response, msg.m_tag.m_recvDataSize);
++		return 1;
++	}
++}
++
++unsigned int UnlockVcMemory(unsigned int handle)
++{
++	struct vc_msg
++	{
++		unsigned int m_msgSize;
++		unsigned int m_response;
++
++		struct vc_tag
++		{
++			unsigned int m_tagId;
++			unsigned int m_sendBufferSize;
++			union {
++				unsigned int m_sendDataSize;
++				unsigned int m_recvDataSize;
++			};
++
++			struct args
++			{
++				union {
++					unsigned int m_handle;
++					unsigned int m_error;
++				};
++			} m_args;
++		} m_tag;
++
++		unsigned int m_endTag;
++	} msg;
++	int s;
++
++	msg.m_msgSize = sizeof(msg);
++	msg.m_response = 0;
++	msg.m_endTag = 0;
++
++	//fill in the tag for the unlock command
++	msg.m_tag.m_tagId = 0x3000e;
++	msg.m_tag.m_sendBufferSize = 4;
++	msg.m_tag.m_sendDataSize = 4;
++
++	//pass across the handle
++	msg.m_tag.m_args.m_handle = handle;
++
++	s = bcm_mailbox_property(&msg, sizeof(msg));
++
++	//check the error code too
++	if (s == 0 && msg.m_response == 0x80000000 && msg.m_tag.m_recvDataSize == 0x80000004 && msg.m_tag.m_args.m_error == 0)
++		return 0;
++	else
++	{
++		printk(KERN_ERR "failed to unlock vc memory: s=%d response=%08x recv data size=%08x error%08x\n",
++				s, msg.m_response, msg.m_tag.m_recvDataSize, msg.m_tag.m_args.m_error);
++		return 1;
++	}
++}
++
++unsigned int ExecuteVcCode(unsigned int code,
++		unsigned int r0, unsigned int r1, unsigned int r2, unsigned int r3, unsigned int r4, unsigned int r5)
++{
++	struct vc_msg
++	{
++		unsigned int m_msgSize;
++		unsigned int m_response;
++
++		struct vc_tag
++		{
++			unsigned int m_tagId;
++			unsigned int m_sendBufferSize;
++			union {
++				unsigned int m_sendDataSize;
++				unsigned int m_recvDataSize;
++			};
++
++			struct args
++			{
++				union {
++					unsigned int m_pCode;
++					unsigned int m_return;
++				};
++				unsigned int m_r0;
++				unsigned int m_r1;
++				unsigned int m_r2;
++				unsigned int m_r3;
++				unsigned int m_r4;
++				unsigned int m_r5;
++			} m_args;
++		} m_tag;
++
++		unsigned int m_endTag;
++	} msg;
++	int s;
++
++	msg.m_msgSize = sizeof(msg);
++	msg.m_response = 0;
++	msg.m_endTag = 0;
++
++	//fill in the tag for the unlock command
++	msg.m_tag.m_tagId = 0x30010;
++	msg.m_tag.m_sendBufferSize = 28;
++	msg.m_tag.m_sendDataSize = 28;
++
++	//pass across the handle
++	msg.m_tag.m_args.m_pCode = code;
++	msg.m_tag.m_args.m_r0 = r0;
++	msg.m_tag.m_args.m_r1 = r1;
++	msg.m_tag.m_args.m_r2 = r2;
++	msg.m_tag.m_args.m_r3 = r3;
++	msg.m_tag.m_args.m_r4 = r4;
++	msg.m_tag.m_args.m_r5 = r5;
++
++	s = bcm_mailbox_property(&msg, sizeof(msg));
++
++	//check the error code too
++	if (s == 0 && msg.m_response == 0x80000000 && msg.m_tag.m_recvDataSize == 0x80000004)
++		return msg.m_tag.m_args.m_return;
++	else
++	{
++		printk(KERN_ERR "failed to execute: s=%d response=%08x recv data size=%08x\n",
++				s, msg.m_response, msg.m_tag.m_recvDataSize);
++		return 1;
++	}
++}
+diff -Nur linux-3.12.6/arch/arm/Makefile linux-raspberry-pi/arch/arm/Makefile
+--- linux-3.12.6/arch/arm/Makefile	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/arch/arm/Makefile	2013-12-29 10:40:20.000000000 +0100
+@@ -146,6 +146,7 @@
+ # by CONFIG_* macro name.
+ machine-$(CONFIG_ARCH_AT91)		+= at91
+ machine-$(CONFIG_ARCH_BCM)		+= bcm
++machine-$(CONFIG_ARCH_BCM2708)		+= bcm2708
+ machine-$(CONFIG_ARCH_BCM2835)		+= bcm2835
+ machine-$(CONFIG_ARCH_CLPS711X)		+= clps711x
+ machine-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx
+diff -Nur linux-3.12.6/arch/arm/mm/Kconfig linux-raspberry-pi/arch/arm/mm/Kconfig
+--- linux-3.12.6/arch/arm/mm/Kconfig	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mm/Kconfig	2013-12-29 10:40:21.000000000 +0100
+@@ -358,7 +358,7 @@
+ 
+ # ARMv6
+ config CPU_V6
+-	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
++	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || MACH_BCM2708
+ 	select CPU_32v6
+ 	select CPU_ABRT_EV6
+ 	select CPU_CACHE_V6
+diff -Nur linux-3.12.6/arch/arm/mm/proc-v6.S linux-raspberry-pi/arch/arm/mm/proc-v6.S
+--- linux-3.12.6/arch/arm/mm/proc-v6.S	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/arch/arm/mm/proc-v6.S	2013-12-29 10:40:21.000000000 +0100
+@@ -73,10 +73,19 @@
+  *
+  *	IRQs are already disabled.
+  */
++
++/* See jira SW-5991 for details of this workaround */
+ ENTRY(cpu_v6_do_idle)
+-	mov	r1, #0
+-	mcr	p15, 0, r1, c7, c10, 4		@ DWB - WFI may enter a low-power mode
+-	mcr	p15, 0, r1, c7, c0, 4		@ wait for interrupt
++	.align 5
++	mov     r1, #2
++1:	subs	r1, #1
++	nop
++	mcreq	p15, 0, r1, c7, c10, 4		@ DWB - WFI may enter a low-power mode
++	mcreq	p15, 0, r1, c7, c0, 4		@ wait for interrupt
++	nop
++	nop
++	nop
++	bne 1b
+ 	mov	pc, lr
+ 
+ ENTRY(cpu_v6_dcache_clean_area)
+diff -Nur linux-3.12.6/arch/arm/tools/mach-types linux-raspberry-pi/arch/arm/tools/mach-types
+--- linux-3.12.6/arch/arm/tools/mach-types	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/arch/arm/tools/mach-types	2013-12-29 10:40:21.000000000 +0100
+@@ -522,6 +522,7 @@
+ prima2_evb		MACH_PRIMA2_EVB		PRIMA2_EVB		3103
+ paz00			MACH_PAZ00		PAZ00			3128
+ acmenetusfoxg20		MACH_ACMENETUSFOXG20	ACMENETUSFOXG20		3129
++bcm2708			MACH_BCM2708		BCM2708			3138
+ ag5evm			MACH_AG5EVM		AG5EVM			3189
+ ics_if_voip		MACH_ICS_IF_VOIP	ICS_IF_VOIP		3206
+ wlf_cragg_6410		MACH_WLF_CRAGG_6410	WLF_CRAGG_6410		3207
+diff -Nur linux-3.12.6/Documentation/video4linux/bcm2835-v4l2.txt linux-raspberry-pi/Documentation/video4linux/bcm2835-v4l2.txt
+--- linux-3.12.6/Documentation/video4linux/bcm2835-v4l2.txt	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/Documentation/video4linux/bcm2835-v4l2.txt	2013-12-29 10:40:20.000000000 +0100
+@@ -0,0 +1,60 @@
++
++BCM2835 (aka Raspberry Pi) V4L2 driver
++======================================
++
++1. Copyright
++============
++
++Copyright © 2013 Raspberry Pi (Trading) Ltd.
++
++2. License
++==========
++
++This program is free software; you can redistribute it and/or modify
++it under the terms of the GNU General Public License as published by
++the Free Software Foundation; either version 2 of the License, or
++(at your option) any later version.
++
++This program is distributed in the hope that it will be useful,
++but WITHOUT ANY WARRANTY; without even the implied warranty of
++MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++GNU General Public License for more details.
++
++You should have received a copy of the GNU General Public License
++along with this program; if not, write to the Free Software
++Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++
++3. Quick Start
++==============
++
++You need a version 1.0 or later of v4l2-ctl, available from:
++	git://git.linuxtv.org/v4l-utils.git
++
++$ sudo modprobe bcm2835-v4l2
++
++Turn on the overlay:
++
++$ v4l2-ctl --overlay=1
++
++Turn off the overlay:
++
++$ v4l2-ctl --overlay=0
++
++Set the capture format for video:
++
++$ v4l2-ctl  --set-fmt-video=width=1920,height=1088,pixelformat=4
++
++(Note: 1088 not 1080).
++
++Capture:
++
++$ v4l2-ctl --stream-mmap=3 --stream-count=100 --stream-to=somefile.h264
++
++Stills capture:
++
++$ v4l2-ctl  --set-fmt-video=width=2592,height=1944,pixelformat=3
++$ v4l2-ctl --stream-mmap=3 --stream-count=1 --stream-to=somefile.jpg
++
++List of available formats:
++
++$ v4l2-ctl --list-formats
+diff -Nur linux-3.12.6/drivers/char/broadcom/Kconfig linux-raspberry-pi/drivers/char/broadcom/Kconfig
+--- linux-3.12.6/drivers/char/broadcom/Kconfig	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/char/broadcom/Kconfig	2013-12-29 10:40:38.000000000 +0100
+@@ -0,0 +1,16 @@
++#
++# Broadcom char driver config
++#
++
++menuconfig BRCM_CHAR_DRIVERS
++	bool "Broadcom Char Drivers"
++	help
++	  Broadcom's char drivers
++
++config BCM_VC_CMA
++	bool "Videocore CMA"
++	depends on CMA && BRCM_CHAR_DRIVERS && BCM2708_VCHIQ
++	default n
++        help
++          Helper for videocore CMA access.
++
+diff -Nur linux-3.12.6/drivers/char/broadcom/Makefile linux-raspberry-pi/drivers/char/broadcom/Makefile
+--- linux-3.12.6/drivers/char/broadcom/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/char/broadcom/Makefile	2013-12-29 10:40:38.000000000 +0100
+@@ -0,0 +1 @@
++obj-$(CONFIG_BCM_VC_CMA)	+= vc_cma/
+diff -Nur linux-3.12.6/drivers/char/broadcom/vc_cma/Makefile linux-raspberry-pi/drivers/char/broadcom/vc_cma/Makefile
+--- linux-3.12.6/drivers/char/broadcom/vc_cma/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/char/broadcom/vc_cma/Makefile	2013-12-29 10:40:38.000000000 +0100
+@@ -0,0 +1,14 @@
++EXTRA_CFLAGS  += -Wall -Wstrict-prototypes -Wno-trigraphs
++EXTRA_CFLAGS  += -Werror
++EXTRA_CFLAGS  += -I"include/linux/broadcom"
++EXTRA_CFLAGS  += -I"drivers/misc/vc04_services"
++EXTRA_CFLAGS  += -I"drivers/misc/vc04_services/interface/vchi"
++EXTRA_CFLAGS  += -I"drivers/misc/vc04_services/interface/vchiq_arm"
++
++EXTRA_CFLAGS  += -D__KERNEL__
++EXTRA_CFLAGS  += -D__linux__
++EXTRA_CFLAGS  += -Werror
++
++obj-$(CONFIG_BCM_VC_CMA) += vc-cma.o
++
++vc-cma-objs := vc_cma.o
+diff -Nur linux-3.12.6/drivers/char/broadcom/vc_cma/vc_cma.c linux-raspberry-pi/drivers/char/broadcom/vc_cma/vc_cma.c
+--- linux-3.12.6/drivers/char/broadcom/vc_cma/vc_cma.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/char/broadcom/vc_cma/vc_cma.c	2013-12-29 10:40:38.000000000 +0100
+@@ -0,0 +1,1143 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/kthread.h>
++#include <linux/fs.h>
++#include <linux/device.h>
++#include <linux/cdev.h>
++#include <linux/mm.h>
++#include <linux/proc_fs.h>
++#include <linux/seq_file.h>
++#include <linux/dma-mapping.h>
++#include <linux/dma-contiguous.h>
++#include <linux/platform_device.h>
++#include <linux/uaccess.h>
++#include <asm/cacheflush.h>
++
++#include "vc_cma.h"
++
++#include "vchiq_util.h"
++#include "vchiq_connected.h"
++//#include "debug_sym.h"
++//#include "vc_mem.h"
++
++#define DRIVER_NAME  "vc-cma"
++
++#define LOG_DBG(fmt, ...) \
++	if (vc_cma_debug) \
++		printk(KERN_INFO fmt "\n", ##__VA_ARGS__)
++#define LOG_ERR(fmt, ...) \
++	printk(KERN_ERR fmt "\n", ##__VA_ARGS__)
++
++#define VC_CMA_FOURCC VCHIQ_MAKE_FOURCC('C', 'M', 'A', ' ')
++#define VC_CMA_VERSION 2
++
++#define VC_CMA_CHUNK_ORDER 6	/* 256K */
++#define VC_CMA_CHUNK_SIZE (4096 << VC_CMA_CHUNK_ORDER)
++#define VC_CMA_MAX_PARAMS_PER_MSG \
++	((VCHIQ_MAX_MSG_SIZE - sizeof(unsigned short))/sizeof(unsigned short))
++#define VC_CMA_RESERVE_COUNT_MAX 16
++
++#define PAGES_PER_CHUNK (VC_CMA_CHUNK_SIZE / PAGE_SIZE)
++
++#define VCADDR_TO_PHYSADDR(vcaddr) (mm_vc_mem_phys_addr + vcaddr)
++
++#define loud_error(...) \
++	LOG_ERR("===== " __VA_ARGS__)
++
++enum {
++	VC_CMA_MSG_QUIT,
++	VC_CMA_MSG_OPEN,
++	VC_CMA_MSG_TICK,
++	VC_CMA_MSG_ALLOC,	/* chunk count */
++	VC_CMA_MSG_FREE,	/* chunk, chunk, ... */
++	VC_CMA_MSG_ALLOCATED,	/* chunk, chunk, ... */
++	VC_CMA_MSG_REQUEST_ALLOC,	/* chunk count */
++	VC_CMA_MSG_REQUEST_FREE,	/* chunk count */
++	VC_CMA_MSG_RESERVE,	/* bytes lo, bytes hi */
++	VC_CMA_MSG_UPDATE_RESERVE,
++	VC_CMA_MSG_MAX
++};
++
++struct cma_msg {
++	unsigned short type;
++	unsigned short params[VC_CMA_MAX_PARAMS_PER_MSG];
++};
++
++struct vc_cma_reserve_user {
++	unsigned int pid;
++	unsigned int reserve;
++};
++
++/* Device (/dev) related variables */
++static dev_t vc_cma_devnum;
++static struct class *vc_cma_class;
++static struct cdev vc_cma_cdev;
++static int vc_cma_inited;
++static int vc_cma_debug;
++
++/* Proc entry */
++static struct proc_dir_entry *vc_cma_proc_entry;
++
++phys_addr_t vc_cma_base;
++struct page *vc_cma_base_page;
++unsigned int vc_cma_size;
++EXPORT_SYMBOL(vc_cma_size);
++unsigned int vc_cma_initial;
++unsigned int vc_cma_chunks;
++unsigned int vc_cma_chunks_used;
++unsigned int vc_cma_chunks_reserved;
++
++static int in_loud_error;
++
++unsigned int vc_cma_reserve_total;
++unsigned int vc_cma_reserve_count;
++struct vc_cma_reserve_user vc_cma_reserve_users[VC_CMA_RESERVE_COUNT_MAX];
++static DEFINE_SEMAPHORE(vc_cma_reserve_mutex);
++static DEFINE_SEMAPHORE(vc_cma_worker_queue_push_mutex);
++
++static u64 vc_cma_dma_mask = DMA_BIT_MASK(32);
++static struct platform_device vc_cma_device = {
++	.name = "vc-cma",
++	.id = 0,
++	.dev = {
++		.dma_mask = &vc_cma_dma_mask,
++		.coherent_dma_mask = DMA_BIT_MASK(32),
++		},
++};
++
++static VCHIQ_INSTANCE_T cma_instance;
++static VCHIQ_SERVICE_HANDLE_T cma_service;
++static VCHIU_QUEUE_T cma_msg_queue;
++static struct task_struct *cma_worker;
++
++static int vc_cma_set_reserve(unsigned int reserve, unsigned int pid);
++static int vc_cma_alloc_chunks(int num_chunks, struct cma_msg *reply);
++static VCHIQ_STATUS_T cma_service_callback(VCHIQ_REASON_T reason,
++					   VCHIQ_HEADER_T * header,
++					   VCHIQ_SERVICE_HANDLE_T service,
++					   void *bulk_userdata);
++static void send_vc_msg(unsigned short type,
++			unsigned short param1, unsigned short param2);
++static bool send_worker_msg(VCHIQ_HEADER_T * msg);
++
++static int early_vc_cma_mem(char *p)
++{
++	unsigned int new_size;
++	printk(KERN_NOTICE "early_vc_cma_mem(%s)", p);
++	vc_cma_size = memparse(p, &p);
++	vc_cma_initial = vc_cma_size;
++	if (*p == '/')
++		vc_cma_size = memparse(p + 1, &p);
++	if (*p == '@')
++		vc_cma_base = memparse(p + 1, &p);
++
++	new_size = (vc_cma_size - ((-vc_cma_base) & (VC_CMA_CHUNK_SIZE - 1)))
++	    & ~(VC_CMA_CHUNK_SIZE - 1);
++	if (new_size > vc_cma_size)
++		vc_cma_size = 0;
++	vc_cma_initial = (vc_cma_initial + VC_CMA_CHUNK_SIZE - 1)
++	    & ~(VC_CMA_CHUNK_SIZE - 1);
++	if (vc_cma_initial > vc_cma_size)
++		vc_cma_initial = vc_cma_size;
++	vc_cma_base = (vc_cma_base + VC_CMA_CHUNK_SIZE - 1)
++	    & ~(VC_CMA_CHUNK_SIZE - 1);
++
++	printk(KERN_NOTICE " -> initial %x, size %x, base %x", vc_cma_initial,
++	       vc_cma_size, (unsigned int)vc_cma_base);
++
++	return 0;
++}
++
++early_param("vc-cma-mem", early_vc_cma_mem);
++
++void vc_cma_early_init(void)
++{
++	LOG_DBG("vc_cma_early_init - vc_cma_chunks = %d", vc_cma_chunks);
++	if (vc_cma_size) {
++		int rc = platform_device_register(&vc_cma_device);
++		LOG_DBG("platform_device_register -> %d", rc);
++	}
++}
++
++void vc_cma_reserve(void)
++{
++	/* if vc_cma_size is set, then declare vc CMA area of the same
++	 * size from the end of memory
++	 */
++	if (vc_cma_size) {
++		if (dma_declare_contiguous(NULL /*&vc_cma_device.dev*/, vc_cma_size,
++					   vc_cma_base, 0) == 0) {
++		} else {
++			LOG_ERR("vc_cma: dma_declare_contiguous(%x,%x) failed",
++				vc_cma_size, (unsigned int)vc_cma_base);
++			vc_cma_size = 0;
++		}
++	}
++	vc_cma_chunks = vc_cma_size / VC_CMA_CHUNK_SIZE;
++}
++
++/****************************************************************************
++*
++*   vc_cma_open
++*
++***************************************************************************/
++
++static int vc_cma_open(struct inode *inode, struct file *file)
++{
++	(void)inode;
++	(void)file;
++
++	return 0;
++}
++
++/****************************************************************************
++*
++*   vc_cma_release
++*
++***************************************************************************/
++
++static int vc_cma_release(struct inode *inode, struct file *file)
++{
++	(void)inode;
++	(void)file;
++
++	vc_cma_set_reserve(0, current->tgid);
++
++	return 0;
++}
++
++/****************************************************************************
++*
++*   vc_cma_ioctl
++*
++***************************************************************************/
++
++static long vc_cma_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
++{
++	int rc = 0;
++
++	(void)cmd;
++	(void)arg;
++
++	switch (cmd) {
++	case VC_CMA_IOC_RESERVE:
++		rc = vc_cma_set_reserve((unsigned int)arg, current->tgid);
++		if (rc >= 0)
++			rc = 0;
++		break;
++	default:
++		LOG_ERR("vc-cma: Unknown ioctl %x", cmd);
++		return -ENOTTY;
++	}
++
++	return rc;
++}
++
++/****************************************************************************
++*
++*   File Operations for the driver.
++*
++***************************************************************************/
++
++static const struct file_operations vc_cma_fops = {
++	.owner = THIS_MODULE,
++	.open = vc_cma_open,
++	.release = vc_cma_release,
++	.unlocked_ioctl = vc_cma_ioctl,
++};
++
++/****************************************************************************
++*
++*   vc_cma_proc_open
++*
++***************************************************************************/
++
++static int vc_cma_show_info(struct seq_file *m, void *v)
++{
++	int i;
++
++	seq_printf(m, "Videocore CMA:\n");
++	seq_printf(m, "   Base       : %08x\n", (unsigned int)vc_cma_base);
++	seq_printf(m, "   Length     : %08x\n", vc_cma_size);
++	seq_printf(m, "   Initial    : %08x\n", vc_cma_initial);
++	seq_printf(m, "   Chunk size : %08x\n", VC_CMA_CHUNK_SIZE);
++	seq_printf(m, "   Chunks     : %4d (%d bytes)\n",
++		   (int)vc_cma_chunks,
++		   (int)(vc_cma_chunks * VC_CMA_CHUNK_SIZE));
++	seq_printf(m, "   Used       : %4d (%d bytes)\n",
++		   (int)vc_cma_chunks_used,
++		   (int)(vc_cma_chunks_used * VC_CMA_CHUNK_SIZE));
++	seq_printf(m, "   Reserved   : %4d (%d bytes)\n",
++		   (unsigned int)vc_cma_chunks_reserved,
++		   (int)(vc_cma_chunks_reserved * VC_CMA_CHUNK_SIZE));
++
++	for (i = 0; i < vc_cma_reserve_count; i++) {
++		struct vc_cma_reserve_user *user = &vc_cma_reserve_users[i];
++		seq_printf(m, "     PID %5d: %d bytes\n", user->pid,
++			   user->reserve);
++	}
++
++	seq_printf(m, "\n");
++
++	return 0;
++}
++
++static int vc_cma_proc_open(struct inode *inode, struct file *file)
++{
++	return single_open(file, vc_cma_show_info, NULL);
++}
++
++/****************************************************************************
++*
++*   vc_cma_proc_write
++*
++***************************************************************************/
++
++static int vc_cma_proc_write(struct file *file,
++			     const char __user *buffer,
++			     size_t size, loff_t *ppos)
++{
++	int rc = -EFAULT;
++	char input_str[20];
++
++	memset(input_str, 0, sizeof(input_str));
++
++	if (size > sizeof(input_str)) {
++		LOG_ERR("%s: input string length too long", __func__);
++		goto out;
++	}
++
++	if (copy_from_user(input_str, buffer, size - 1)) {
++		LOG_ERR("%s: failed to get input string", __func__);
++		goto out;
++	}
++#define ALLOC_STR "alloc"
++#define FREE_STR "free"
++#define DEBUG_STR "debug"
++#define RESERVE_STR "reserve"
++	if (strncmp(input_str, ALLOC_STR, strlen(ALLOC_STR)) == 0) {
++		int size;
++		char *p = input_str + strlen(ALLOC_STR);
++
++		while (*p == ' ')
++			p++;
++		size = memparse(p, NULL);
++		LOG_ERR("/proc/vc-cma: alloc %d", size);
++		if (size)
++			send_vc_msg(VC_CMA_MSG_REQUEST_FREE,
++				    size / VC_CMA_CHUNK_SIZE, 0);
++		else
++			LOG_ERR("invalid size '%s'", p);
++		rc = size;
++	} else if (strncmp(input_str, FREE_STR, strlen(FREE_STR)) == 0) {
++		int size;
++		char *p = input_str + strlen(FREE_STR);
++
++		while (*p == ' ')
++			p++;
++		size = memparse(p, NULL);
++		LOG_ERR("/proc/vc-cma: free %d", size);
++		if (size)
++			send_vc_msg(VC_CMA_MSG_REQUEST_ALLOC,
++				    size / VC_CMA_CHUNK_SIZE, 0);
++		else
++			LOG_ERR("invalid size '%s'", p);
++		rc = size;
++	} else if (strncmp(input_str, DEBUG_STR, strlen(DEBUG_STR)) == 0) {
++		char *p = input_str + strlen(DEBUG_STR);
++		while (*p == ' ')
++			p++;
++		if ((strcmp(p, "on") == 0) || (strcmp(p, "1") == 0))
++			vc_cma_debug = 1;
++		else if ((strcmp(p, "off") == 0) || (strcmp(p, "0") == 0))
++			vc_cma_debug = 0;
++		LOG_ERR("/proc/vc-cma: debug %s", vc_cma_debug ? "on" : "off");
++		rc = size;
++	} else if (strncmp(input_str, RESERVE_STR, strlen(RESERVE_STR)) == 0) {
++		int size;
++		int reserved;
++		char *p = input_str + strlen(RESERVE_STR);
++		while (*p == ' ')
++			p++;
++		size = memparse(p, NULL);
++
++		reserved = vc_cma_set_reserve(size, current->tgid);
++		rc = (reserved >= 0) ? size : reserved;
++	}
++
++out:
++	return rc;
++}
++
++/****************************************************************************
++*
++*   File Operations for /proc interface.
++*
++***************************************************************************/
++
++static const struct file_operations vc_cma_proc_fops = {
++	.open = vc_cma_proc_open,
++	.read = seq_read,
++	.write = vc_cma_proc_write,
++	.llseek = seq_lseek,
++	.release = single_release
++};
++
++static int vc_cma_set_reserve(unsigned int reserve, unsigned int pid)
++{
++	struct vc_cma_reserve_user *user = NULL;
++	int delta = 0;
++	int i;
++
++	if (down_interruptible(&vc_cma_reserve_mutex))
++		return -ERESTARTSYS;
++
++	for (i = 0; i < vc_cma_reserve_count; i++) {
++		if (pid == vc_cma_reserve_users[i].pid) {
++			user = &vc_cma_reserve_users[i];
++			delta = reserve - user->reserve;
++			if (reserve)
++				user->reserve = reserve;
++			else {
++				/* Remove this entry by copying downwards */
++				while ((i + 1) < vc_cma_reserve_count) {
++					user[0].pid = user[1].pid;
++					user[0].reserve = user[1].reserve;
++					user++;
++					i++;
++				}
++				vc_cma_reserve_count--;
++				user = NULL;
++			}
++			break;
++		}
++	}
++
++	if (reserve && !user) {
++		if (vc_cma_reserve_count == VC_CMA_RESERVE_COUNT_MAX) {
++			LOG_ERR("vc-cma: Too many reservations - "
++				"increase CMA_RESERVE_COUNT_MAX");
++			up(&vc_cma_reserve_mutex);
++			return -EBUSY;
++		}
++		user = &vc_cma_reserve_users[vc_cma_reserve_count];
++		user->pid = pid;
++		user->reserve = reserve;
++		delta = reserve;
++		vc_cma_reserve_count++;
++	}
++
++	vc_cma_reserve_total += delta;
++
++	send_vc_msg(VC_CMA_MSG_RESERVE,
++		    vc_cma_reserve_total & 0xffff, vc_cma_reserve_total >> 16);
++
++	send_worker_msg((VCHIQ_HEADER_T *) VC_CMA_MSG_UPDATE_RESERVE);
++
++	LOG_DBG("/proc/vc-cma: reserve %d (PID %d) - total %u",
++		reserve, pid, vc_cma_reserve_total);
++
++	up(&vc_cma_reserve_mutex);
++
++	return vc_cma_reserve_total;
++}
++
++static VCHIQ_STATUS_T cma_service_callback(VCHIQ_REASON_T reason,
++					   VCHIQ_HEADER_T * header,
++					   VCHIQ_SERVICE_HANDLE_T service,
++					   void *bulk_userdata)
++{
++	switch (reason) {
++	case VCHIQ_MESSAGE_AVAILABLE:
++		if (!send_worker_msg(header))
++			return VCHIQ_RETRY;
++		break;
++	case VCHIQ_SERVICE_CLOSED:
++		LOG_DBG("CMA service closed");
++		break;
++	default:
++		LOG_ERR("Unexpected CMA callback reason %d", reason);
++		break;
++	}
++	return VCHIQ_SUCCESS;
++}
++
++static void send_vc_msg(unsigned short type,
++			unsigned short param1, unsigned short param2)
++{
++	unsigned short msg[] = { type, param1, param2 };
++	VCHIQ_ELEMENT_T elem = { &msg, sizeof(msg) };
++	VCHIQ_STATUS_T ret;
++	vchiq_use_service(cma_service);
++	ret = vchiq_queue_message(cma_service, &elem, 1);
++	vchiq_release_service(cma_service);
++	if (ret != VCHIQ_SUCCESS)
++		LOG_ERR("vchiq_queue_message returned %x", ret);
++}
++
++static bool send_worker_msg(VCHIQ_HEADER_T * msg)
++{
++	if (down_interruptible(&vc_cma_worker_queue_push_mutex))
++		return false;
++	vchiu_queue_push(&cma_msg_queue, msg);
++	up(&vc_cma_worker_queue_push_mutex);
++	return true;
++}
++
++static int vc_cma_alloc_chunks(int num_chunks, struct cma_msg *reply)
++{
++	int i;
++	for (i = 0; i < num_chunks; i++) {
++		struct page *chunk;
++		unsigned int chunk_num;
++		uint8_t *chunk_addr;
++		size_t chunk_size = PAGES_PER_CHUNK << PAGE_SHIFT;
++
++		chunk = dma_alloc_from_contiguous(NULL /*&vc_cma_device.dev*/,
++						  PAGES_PER_CHUNK,
++						  VC_CMA_CHUNK_ORDER);
++		if (!chunk)
++			break;
++
++		chunk_addr = page_address(chunk);
++		dmac_flush_range(chunk_addr, chunk_addr + chunk_size);
++		outer_inv_range(__pa(chunk_addr), __pa(chunk_addr) +
++			chunk_size);
++
++		chunk_num =
++		    (page_to_phys(chunk) - vc_cma_base) / VC_CMA_CHUNK_SIZE;
++		BUG_ON(((page_to_phys(chunk) - vc_cma_base) %
++			VC_CMA_CHUNK_SIZE) != 0);
++		if (chunk_num >= vc_cma_chunks) {
++			LOG_ERR("%s: ===============================",
++				__func__);
++			LOG_ERR("%s: chunk phys %x, vc_cma %x-%x - "
++				"bad SPARSEMEM configuration?",
++				__func__, (unsigned int)page_to_phys(chunk),
++				vc_cma_base, vc_cma_base + vc_cma_size - 1);
++			LOG_ERR("%s: dev->cma_area = %p\n", __func__,
++				(void*)0/*vc_cma_device.dev.cma_area*/);
++			LOG_ERR("%s: ===============================",
++				__func__);
++			break;
++		}
++		reply->params[i] = chunk_num;
++		vc_cma_chunks_used++;
++	}
++
++	if (i < num_chunks) {
++		LOG_ERR("%s: dma_alloc_from_contiguous failed "
++			"for %x bytes (alloc %d of %d, %d free)",
++			__func__, VC_CMA_CHUNK_SIZE, i,
++			num_chunks, vc_cma_chunks - vc_cma_chunks_used);
++		num_chunks = i;
++	}
++
++	LOG_DBG("CMA allocated %d chunks -> %d used",
++		num_chunks, vc_cma_chunks_used);
++	reply->type = VC_CMA_MSG_ALLOCATED;
++
++	{
++		VCHIQ_ELEMENT_T elem = {
++			reply,
++			offsetof(struct cma_msg, params[0]) +
++			    num_chunks * sizeof(reply->params[0])
++		};
++		VCHIQ_STATUS_T ret;
++		vchiq_use_service(cma_service);
++		ret = vchiq_queue_message(cma_service, &elem, 1);
++		vchiq_release_service(cma_service);
++		if (ret != VCHIQ_SUCCESS)
++			LOG_ERR("vchiq_queue_message return " "%x", ret);
++	}
++
++	return num_chunks;
++}
++
++static int cma_worker_proc(void *param)
++{
++	static struct cma_msg reply;
++	(void)param;
++
++	while (1) {
++		VCHIQ_HEADER_T *msg;
++		static struct cma_msg msg_copy;
++		struct cma_msg *cma_msg = &msg_copy;
++		int type, msg_size;
++
++		msg = vchiu_queue_pop(&cma_msg_queue);
++		if ((unsigned int)msg >= VC_CMA_MSG_MAX) {
++			msg_size = msg->size;
++			memcpy(&msg_copy, msg->data, msg_size);
++			type = cma_msg->type;
++			vchiq_release_message(cma_service, msg);
++		} else {
++			msg_size = 0;
++			type = (int)msg;
++			if (type == VC_CMA_MSG_QUIT)
++				break;
++			else if (type == VC_CMA_MSG_UPDATE_RESERVE) {
++				msg = NULL;
++				cma_msg = NULL;
++			} else {
++				BUG();
++				continue;
++			}
++		}
++
++		switch (type) {
++		case VC_CMA_MSG_ALLOC:{
++				int num_chunks, free_chunks;
++				num_chunks = cma_msg->params[0];
++				free_chunks =
++				    vc_cma_chunks - vc_cma_chunks_used;
++				LOG_DBG("CMA_MSG_ALLOC(%d chunks)", num_chunks);
++				if (num_chunks > VC_CMA_MAX_PARAMS_PER_MSG) {
++					LOG_ERR
++					    ("CMA_MSG_ALLOC - chunk count (%d) "
++					     "exceeds VC_CMA_MAX_PARAMS_PER_MSG (%d)",
++					     num_chunks,
++					     VC_CMA_MAX_PARAMS_PER_MSG);
++					num_chunks = VC_CMA_MAX_PARAMS_PER_MSG;
++				}
++
++				if (num_chunks > free_chunks) {
++					LOG_ERR
++					    ("CMA_MSG_ALLOC - chunk count (%d) "
++					     "exceeds free chunks (%d)",
++					     num_chunks, free_chunks);
++					num_chunks = free_chunks;
++				}
++
++				vc_cma_alloc_chunks(num_chunks, &reply);
++			}
++			break;
++
++		case VC_CMA_MSG_FREE:{
++				int chunk_count =
++				    (msg_size -
++				     offsetof(struct cma_msg,
++					      params)) /
++				    sizeof(cma_msg->params[0]);
++				int i;
++				BUG_ON(chunk_count <= 0);
++
++				LOG_DBG("CMA_MSG_FREE(%d chunks - %x, ...)",
++					chunk_count, cma_msg->params[0]);
++				for (i = 0; i < chunk_count; i++) {
++					int chunk_num = cma_msg->params[i];
++					struct page *page = vc_cma_base_page +
++					    chunk_num * PAGES_PER_CHUNK;
++					if (chunk_num >= vc_cma_chunks) {
++						LOG_ERR
++						    ("CMA_MSG_FREE - chunk %d of %d"
++						     " (value %x) exceeds maximum "
++						     "(%x)", i, chunk_count,
++						     chunk_num,
++						     vc_cma_chunks - 1);
++						break;
++					}
++
++					if (!dma_release_from_contiguous
++					    (NULL /*&vc_cma_device.dev*/, page,
++					     PAGES_PER_CHUNK)) {
++						LOG_ERR
++						    ("CMA_MSG_FREE - failed to "
++						     "release chunk %d (phys %x, "
++						     "page %x)", chunk_num,
++						     page_to_phys(page),
++						     (unsigned int)page);
++					}
++					vc_cma_chunks_used--;
++				}
++				LOG_DBG("CMA released %d chunks -> %d used",
++					i, vc_cma_chunks_used);
++			}
++			break;
++
++		case VC_CMA_MSG_UPDATE_RESERVE:{
++				int chunks_needed =
++				    ((vc_cma_reserve_total + VC_CMA_CHUNK_SIZE -
++				      1)
++				     / VC_CMA_CHUNK_SIZE) -
++				    vc_cma_chunks_reserved;
++
++				LOG_DBG
++				    ("CMA_MSG_UPDATE_RESERVE(%d chunks needed)",
++				     chunks_needed);
++
++				/* Cap the reservations to what is available */
++				if (chunks_needed > 0) {
++					if (chunks_needed >
++					    (vc_cma_chunks -
++					     vc_cma_chunks_used))
++						chunks_needed =
++						    (vc_cma_chunks -
++						     vc_cma_chunks_used);
++
++					chunks_needed =
++					    vc_cma_alloc_chunks(chunks_needed,
++								&reply);
++				}
++
++				LOG_DBG
++				    ("CMA_MSG_UPDATE_RESERVE(%d chunks allocated)",
++				     chunks_needed);
++				vc_cma_chunks_reserved += chunks_needed;
++			}
++			break;
++
++		default:
++			LOG_ERR("unexpected msg type %d", type);
++			break;
++		}
++	}
++
++	LOG_DBG("quitting...");
++	return 0;
++}
++
++/****************************************************************************
++*
++*   vc_cma_connected_init
++*
++*   This function is called once the videocore has been connected.
++*
++***************************************************************************/
++
++static void vc_cma_connected_init(void)
++{
++	VCHIQ_SERVICE_PARAMS_T service_params;
++
++	LOG_DBG("vc_cma_connected_init");
++
++	if (!vchiu_queue_init(&cma_msg_queue, 16)) {
++		LOG_ERR("could not create CMA msg queue");
++		goto fail_queue;
++	}
++
++	if (vchiq_initialise(&cma_instance) != VCHIQ_SUCCESS)
++		goto fail_vchiq_init;
++
++	vchiq_connect(cma_instance);
++
++	service_params.fourcc = VC_CMA_FOURCC;
++	service_params.callback = cma_service_callback;
++	service_params.userdata = NULL;
++	service_params.version = VC_CMA_VERSION;
++	service_params.version_min = VC_CMA_VERSION;
++
++	if (vchiq_open_service(cma_instance, &service_params,
++			       &cma_service) != VCHIQ_SUCCESS) {
++		LOG_ERR("failed to open service - already in use?");
++		goto fail_vchiq_open;
++	}
++
++	vchiq_release_service(cma_service);
++
++	cma_worker = kthread_create(cma_worker_proc, NULL, "cma_worker");
++	if (!cma_worker) {
++		LOG_ERR("could not create CMA worker thread");
++		goto fail_worker;
++	}
++	set_user_nice(cma_worker, -20);
++	wake_up_process(cma_worker);
++
++	return;
++
++fail_worker:
++	vchiq_close_service(cma_service);
++fail_vchiq_open:
++	vchiq_shutdown(cma_instance);
++fail_vchiq_init:
++	vchiu_queue_delete(&cma_msg_queue);
++fail_queue:
++	return;
++}
++
++void
++loud_error_header(void)
++{
++	if (in_loud_error)
++		return;
++
++	LOG_ERR("============================================================"
++		"================");
++	LOG_ERR("============================================================"
++		"================");
++	LOG_ERR("=====");
++
++	in_loud_error = 1;
++}
++
++void
++loud_error_footer(void)
++{
++	if (!in_loud_error)
++		return;
++
++	LOG_ERR("=====");
++	LOG_ERR("============================================================"
++		"================");
++	LOG_ERR("============================================================"
++		"================");
++
++	in_loud_error = 0;
++}
++
++#if 1
++static int check_cma_config(void) { return 1; }
++#else
++static int
++read_vc_debug_var(VC_MEM_ACCESS_HANDLE_T handle,
++	const char *symbol,
++	void *buf, size_t bufsize)
++{
++	VC_MEM_ADDR_T vcMemAddr;
++	size_t vcMemSize;
++	uint8_t *mapAddr;
++	off_t  vcMapAddr;
++
++	if (!LookupVideoCoreSymbol(handle, symbol,
++		&vcMemAddr,
++		&vcMemSize)) {
++		loud_error_header();
++		loud_error(
++			"failed to find VC symbol \"%s\".",
++			symbol);
++		loud_error_footer();
++		return 0;
++	}
++
++	if (vcMemSize != bufsize) {
++		loud_error_header();
++		loud_error(
++			"VC symbol \"%s\" is the wrong size.",
++			symbol);
++		loud_error_footer();
++		return 0;
++	}
++
++	vcMapAddr = (off_t)vcMemAddr & VC_MEM_TO_ARM_ADDR_MASK;
++	vcMapAddr += mm_vc_mem_phys_addr;
++	mapAddr = ioremap_nocache(vcMapAddr, vcMemSize);
++	if (mapAddr == 0) {
++		loud_error_header();
++		loud_error(
++			"failed to ioremap \"%s\" @ 0x%x "
++			"(phys: 0x%x, size: %u).",
++			symbol,
++			(unsigned int)vcMapAddr,
++			(unsigned int)vcMemAddr,
++			(unsigned int)vcMemSize);
++		loud_error_footer();
++		return 0;
++	}
++
++	memcpy(buf, mapAddr, bufsize);
++	iounmap(mapAddr);
++
++	return 1;
++}
++
++
++static int
++check_cma_config(void)
++{
++	VC_MEM_ACCESS_HANDLE_T mem_hndl;
++	VC_MEM_ADDR_T mempool_start;
++	VC_MEM_ADDR_T mempool_end;
++	VC_MEM_ADDR_T mempool_offline_start;
++	VC_MEM_ADDR_T mempool_offline_end;
++	VC_MEM_ADDR_T cam_alloc_base;
++	VC_MEM_ADDR_T cam_alloc_size;
++	VC_MEM_ADDR_T cam_alloc_end;
++	int success = 0;
++
++	if (OpenVideoCoreMemory(&mem_hndl) != 0)
++		goto out;
++
++	/* Read the relevant VideoCore variables */
++	if (!read_vc_debug_var(mem_hndl, "__MEMPOOL_START",
++		&mempool_start,
++		sizeof(mempool_start)))
++		goto close;
++
++	if (!read_vc_debug_var(mem_hndl, "__MEMPOOL_END",
++		&mempool_end,
++		sizeof(mempool_end)))
++		goto close;
++
++	if (!read_vc_debug_var(mem_hndl, "__MEMPOOL_OFFLINE_START",
++		&mempool_offline_start,
++		sizeof(mempool_offline_start)))
++		goto close;
++
++	if (!read_vc_debug_var(mem_hndl, "__MEMPOOL_OFFLINE_END",
++		&mempool_offline_end,
++		sizeof(mempool_offline_end)))
++		goto close;
++
++	if (!read_vc_debug_var(mem_hndl, "cam_alloc_base",
++		&cam_alloc_base,
++		sizeof(cam_alloc_base)))
++		goto close;
++
++	if (!read_vc_debug_var(mem_hndl, "cam_alloc_size",
++		&cam_alloc_size,
++		sizeof(cam_alloc_size)))
++		goto close;
++
++	cam_alloc_end = cam_alloc_base + cam_alloc_size;
++
++	success = 1;
++
++	/* Now the sanity checks */
++	if (!mempool_offline_start)
++		mempool_offline_start = mempool_start;
++	if (!mempool_offline_end)
++		mempool_offline_end = mempool_end;
++
++	if (VCADDR_TO_PHYSADDR(mempool_offline_start) != vc_cma_base) {
++		loud_error_header();
++		loud_error(
++			"__MEMPOOL_OFFLINE_START(%x -> %lx) doesn't match "
++			"vc_cma_base(%x)",
++			mempool_offline_start,
++			VCADDR_TO_PHYSADDR(mempool_offline_start),
++			vc_cma_base);
++		success = 0;
++	}
++
++	if (VCADDR_TO_PHYSADDR(mempool_offline_end) !=
++		(vc_cma_base + vc_cma_size)) {
++		loud_error_header();
++		loud_error(
++			"__MEMPOOL_OFFLINE_END(%x -> %lx) doesn't match "
++			"vc_cma_base(%x) + vc_cma_size(%x) = %x",
++			mempool_offline_start,
++			VCADDR_TO_PHYSADDR(mempool_offline_end),
++			vc_cma_base, vc_cma_size, vc_cma_base + vc_cma_size);
++		success = 0;
++	}
++
++	if (mempool_end < mempool_start) {
++		loud_error_header();
++		loud_error(
++			"__MEMPOOL_END(%x) must not be before "
++			"__MEMPOOL_START(%x)",
++			mempool_end,
++			mempool_start);
++		success = 0;
++	}
++
++	if (mempool_offline_end < mempool_offline_start) {
++		loud_error_header();
++		loud_error(
++			"__MEMPOOL_OFFLINE_END(%x) must not be before "
++			"__MEMPOOL_OFFLINE_START(%x)",
++			mempool_offline_end,
++			mempool_offline_start);
++		success = 0;
++	}
++
++	if (mempool_offline_start < mempool_start) {
++		loud_error_header();
++		loud_error(
++			"__MEMPOOL_OFFLINE_START(%x) must not be before "
++			"__MEMPOOL_START(%x)",
++			mempool_offline_start,
++			mempool_start);
++		success = 0;
++	}
++
++	if (mempool_offline_end > mempool_end) {
++		loud_error_header();
++		loud_error(
++			"__MEMPOOL_OFFLINE_END(%x) must not be after "
++			"__MEMPOOL_END(%x)",
++			mempool_offline_end,
++			mempool_end);
++		success = 0;
++	}
++
++	if ((cam_alloc_base < mempool_end) &&
++		(cam_alloc_end > mempool_start)) {
++		loud_error_header();
++		loud_error(
++			"cam_alloc pool(%x-%x) overlaps "
++			"mempool(%x-%x)",
++			cam_alloc_base, cam_alloc_end,
++			mempool_start, mempool_end);
++		success = 0;
++	}
++
++	loud_error_footer();
++
++close:
++	CloseVideoCoreMemory(mem_hndl);
++
++out:
++	return success;
++}
++#endif
++
++static int vc_cma_init(void)
++{
++	int rc = -EFAULT;
++	struct device *dev;
++
++	if (!check_cma_config())
++		goto out_release;
++
++	printk(KERN_INFO "vc-cma: Videocore CMA driver\n");
++	printk(KERN_INFO "vc-cma: vc_cma_base      = 0x%08x\n", vc_cma_base);
++	printk(KERN_INFO "vc-cma: vc_cma_size      = 0x%08x (%u MiB)\n",
++	       vc_cma_size, vc_cma_size / (1024 * 1024));
++	printk(KERN_INFO "vc-cma: vc_cma_initial   = 0x%08x (%u MiB)\n",
++	       vc_cma_initial, vc_cma_initial / (1024 * 1024));
++
++	vc_cma_base_page = phys_to_page(vc_cma_base);
++
++	if (vc_cma_chunks) {
++		int chunks_needed = vc_cma_initial / VC_CMA_CHUNK_SIZE;
++
++		for (vc_cma_chunks_used = 0;
++		     vc_cma_chunks_used < chunks_needed; vc_cma_chunks_used++) {
++			struct page *chunk;
++			chunk = dma_alloc_from_contiguous(NULL /*&vc_cma_device.dev*/,
++							  PAGES_PER_CHUNK,
++							  VC_CMA_CHUNK_ORDER);
++			if (!chunk)
++				break;
++			BUG_ON(((page_to_phys(chunk) - vc_cma_base) %
++				VC_CMA_CHUNK_SIZE) != 0);
++		}
++		if (vc_cma_chunks_used != chunks_needed) {
++			LOG_ERR("%s: dma_alloc_from_contiguous failed (%d "
++				"bytes, allocation %d of %d)",
++				__func__, VC_CMA_CHUNK_SIZE,
++				vc_cma_chunks_used, chunks_needed);
++			goto out_release;
++		}
++
++		vchiq_add_connected_callback(vc_cma_connected_init);
++	}
++
++	rc = alloc_chrdev_region(&vc_cma_devnum, 0, 1, DRIVER_NAME);
++	if (rc < 0) {
++		LOG_ERR("%s: alloc_chrdev_region failed (rc=%d)", __func__, rc);
++		goto out_release;
++	}
++
++	cdev_init(&vc_cma_cdev, &vc_cma_fops);
++	rc = cdev_add(&vc_cma_cdev, vc_cma_devnum, 1);
++	if (rc != 0) {
++		LOG_ERR("%s: cdev_add failed (rc=%d)", __func__, rc);
++		goto out_unregister;
++	}
++
++	vc_cma_class = class_create(THIS_MODULE, DRIVER_NAME);
++	if (IS_ERR(vc_cma_class)) {
++		rc = PTR_ERR(vc_cma_class);
++		LOG_ERR("%s: class_create failed (rc=%d)", __func__, rc);
++		goto out_cdev_del;
++	}
++
++	dev = device_create(vc_cma_class, NULL, vc_cma_devnum, NULL,
++			    DRIVER_NAME);
++	if (IS_ERR(dev)) {
++		rc = PTR_ERR(dev);
++		LOG_ERR("%s: device_create failed (rc=%d)", __func__, rc);
++		goto out_class_destroy;
++	}
++
++	vc_cma_proc_entry = proc_create(DRIVER_NAME, 0444, NULL, &vc_cma_proc_fops);
++	if (vc_cma_proc_entry == NULL) {
++		rc = -EFAULT;
++		LOG_ERR("%s: proc_create failed", __func__);
++		goto out_device_destroy;
++	}
++
++	vc_cma_inited = 1;
++	return 0;
++
++out_device_destroy:
++	device_destroy(vc_cma_class, vc_cma_devnum);
++
++out_class_destroy:
++	class_destroy(vc_cma_class);
++	vc_cma_class = NULL;
++
++out_cdev_del:
++	cdev_del(&vc_cma_cdev);
++
++out_unregister:
++	unregister_chrdev_region(vc_cma_devnum, 1);
++
++out_release:
++	/* It is tempting to try to clean up by calling
++	   dma_release_from_contiguous for all allocated chunks, but it isn't
++	   a very safe thing to do. If vc_cma_initial is non-zero it is because
++	   VideoCore is already using that memory, so giving it back to Linux
++	   is likely to be fatal.
++	 */
++	return -1;
++}
++
++/****************************************************************************
++*
++*   vc_cma_exit
++*
++***************************************************************************/
++
++static void __exit vc_cma_exit(void)
++{
++	LOG_DBG("%s: called", __func__);
++
++	if (vc_cma_inited) {
++		remove_proc_entry(DRIVER_NAME, NULL);
++		device_destroy(vc_cma_class, vc_cma_devnum);
++		class_destroy(vc_cma_class);
++		cdev_del(&vc_cma_cdev);
++		unregister_chrdev_region(vc_cma_devnum, 1);
++	}
++}
++
++module_init(vc_cma_init);
++module_exit(vc_cma_exit);
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Broadcom Corporation");
+diff -Nur linux-3.12.6/drivers/char/hw_random/bcm2708-rng.c linux-raspberry-pi/drivers/char/hw_random/bcm2708-rng.c
+--- linux-3.12.6/drivers/char/hw_random/bcm2708-rng.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/char/hw_random/bcm2708-rng.c	2013-12-29 10:40:38.000000000 +0100
+@@ -0,0 +1,117 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/hw_random.h>
++#include <linux/printk.h>
++
++#include <asm/io.h>
++#include <mach/hardware.h>
++#include <mach/platform.h>
++
++#define RNG_CTRL		(0x0)
++#define RNG_STATUS		(0x4)
++#define RNG_DATA		(0x8)
++#define RNG_FF_THRESHOLD	(0xc)
++
++/* enable rng */
++#define RNG_RBGEN               0x1
++/* double speed, less random mode */
++#define RNG_RBG2X               0x2
++
++/* the initial numbers generated are "less random" so will be discarded */
++#define RNG_WARMUP_COUNT      0x40000
++
++static int bcm2708_rng_data_read(struct hwrng *rng, u32 *buffer)
++{
++	void __iomem *rng_base = (void __iomem *)rng->priv;
++	unsigned words;
++	/* wait for a random number to be in fifo */
++        do {
++		words = __raw_readl(rng_base + RNG_STATUS)>>24;
++	}
++        while (words == 0);
++	/* read the random number */
++	*buffer = __raw_readl(rng_base + RNG_DATA);
++	return 4;
++}
++
++static struct hwrng bcm2708_rng_ops = {
++	.name		= "bcm2708",
++	.data_read	= bcm2708_rng_data_read,
++};
++
++static int __init bcm2708_rng_init(void)
++{
++	void __iomem *rng_base;
++	int err;
++
++	/* map peripheral */
++	rng_base = ioremap(RNG_BASE, 0x10);
++	pr_info("bcm2708_rng_init=%p\n", rng_base);
++	if (!rng_base) {
++		pr_err("bcm2708_rng_init failed to ioremap\n");
++		return -ENOMEM;
++	}
++	bcm2708_rng_ops.priv = (unsigned long)rng_base;
++	/* register driver */
++	err = hwrng_register(&bcm2708_rng_ops);
++	if (err) {
++		pr_err("bcm2708_rng_init hwrng_register()=%d\n", err);
++		iounmap(rng_base);
++	} else {
++		/* set warm-up count & enable */
++		__raw_writel(RNG_WARMUP_COUNT, rng_base + RNG_STATUS);
++		__raw_writel(RNG_RBGEN, rng_base + RNG_CTRL);
++	}
++	return err;
++}
++
++static void __exit bcm2708_rng_exit(void)
++{
++	void __iomem *rng_base = (void __iomem *)bcm2708_rng_ops.priv;
++	pr_info("bcm2708_rng_exit\n");
++	/* disable rng hardware */
++	__raw_writel(0, rng_base + RNG_CTRL);
++	/* unregister driver */
++	hwrng_unregister(&bcm2708_rng_ops);
++	iounmap(rng_base);
++}
++
++module_init(bcm2708_rng_init);
++module_exit(bcm2708_rng_exit);
++
++MODULE_DESCRIPTION("BCM2708 H/W Random Number Generator (RNG) driver");
++MODULE_LICENSE("GPL and additional rights");
+diff -Nur linux-3.12.6/drivers/char/hw_random/Kconfig linux-raspberry-pi/drivers/char/hw_random/Kconfig
+--- linux-3.12.6/drivers/char/hw_random/Kconfig	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/char/hw_random/Kconfig	2013-12-29 10:40:38.000000000 +0100
+@@ -314,3 +314,14 @@
+ 	  module will be called tpm-rng.
+ 
+ 	  If unsure, say Y.
++
++config HW_RANDOM_BCM2708
++	tristate "BCM2708 generic true random number generator support"
++	depends on HW_RANDOM && ARCH_BCM2708
++	---help---
++	 This driver provides the kernel-side support for the BCM2708 hardware.
++
++	 To compile this driver as a module, choose M here: the
++	 module will be called bcm2708-rng.
++
++	 If unsure, say N.
+diff -Nur linux-3.12.6/drivers/char/hw_random/Makefile linux-raspberry-pi/drivers/char/hw_random/Makefile
+--- linux-3.12.6/drivers/char/hw_random/Makefile	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/char/hw_random/Makefile	2013-12-29 10:40:38.000000000 +0100
+@@ -27,3 +27,4 @@
+ obj-$(CONFIG_HW_RANDOM_EXYNOS)	+= exynos-rng.o
+ obj-$(CONFIG_HW_RANDOM_TPM) += tpm-rng.o
+ obj-$(CONFIG_HW_RANDOM_BCM2835) += bcm2835-rng.o
++obj-$(CONFIG_HW_RANDOM_BCM2708) += bcm2708-rng.o
+diff -Nur linux-3.12.6/drivers/char/Kconfig linux-raspberry-pi/drivers/char/Kconfig
+--- linux-3.12.6/drivers/char/Kconfig	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/char/Kconfig	2013-12-29 10:40:38.000000000 +0100
+@@ -574,6 +574,8 @@
+ 
+ source "drivers/s390/char/Kconfig"
+ 
++source "drivers/char/broadcom/Kconfig"
++
+ config MSM_SMD_PKT
+ 	bool "Enable device interface for some SMD packet ports"
+ 	default n
+diff -Nur linux-3.12.6/drivers/char/Makefile linux-raspberry-pi/drivers/char/Makefile
+--- linux-3.12.6/drivers/char/Makefile	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/char/Makefile	2013-12-29 10:40:38.000000000 +0100
+@@ -62,3 +62,5 @@
+ js-rtc-y = rtc.o
+ 
+ obj-$(CONFIG_TILE_SROM)		+= tile-srom.o
++
++obj-$(CONFIG_BRCM_CHAR_DRIVERS) += broadcom/
+diff -Nur linux-3.12.6/drivers/cpufreq/bcm2835-cpufreq.c linux-raspberry-pi/drivers/cpufreq/bcm2835-cpufreq.c
+--- linux-3.12.6/drivers/cpufreq/bcm2835-cpufreq.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/cpufreq/bcm2835-cpufreq.c	2013-12-29 10:40:38.000000000 +0100
+@@ -0,0 +1,239 @@
++/*****************************************************************************
++* Copyright 2011 Broadcom Corporation.  All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++/*****************************************************************************
++* FILENAME: bcm2835-cpufreq.h
++* DESCRIPTION: This driver dynamically manages the CPU Frequency of the ARM
++* processor. Messages are sent to Videocore either setting or requesting the
++* frequency of the ARM in order to match an appropiate frequency to the current
++* usage of the processor. The policy which selects the frequency to use is
++* defined in the kernel .config file, but can be changed during runtime.
++*****************************************************************************/
++
++/* ---------- INCLUDES ---------- */
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/cpufreq.h>
++#include <mach/vcio.h>
++
++/* ---------- DEFINES ---------- */
++/*#define CPUFREQ_DEBUG_ENABLE*/		/* enable debugging */
++#define MODULE_NAME "bcm2835-cpufreq"
++
++#define VCMSG_ID_ARM_CLOCK 0x000000003		/* Clock/Voltage ID's */
++
++/* debug printk macros */
++#ifdef CPUFREQ_DEBUG_ENABLE
++#define print_debug(fmt,...) pr_debug("%s:%s:%d: "fmt, MODULE_NAME, __func__, __LINE__, ##__VA_ARGS__)
++#else
++#define print_debug(fmt,...)
++#endif
++#define print_err(fmt,...) pr_err("%s:%s:%d: "fmt, MODULE_NAME, __func__,__LINE__, ##__VA_ARGS__)
++#define print_info(fmt,...) pr_info("%s: "fmt, MODULE_NAME, ##__VA_ARGS__)
++
++/* tag part of the message */
++struct vc_msg_tag {
++	uint32_t tag_id;		/* the message id */
++	uint32_t buffer_size;		/* size of the buffer (which in this case is always 8 bytes) */
++	uint32_t data_size;		/* amount of data being sent or received */
++	uint32_t dev_id;		/* the ID of the clock/voltage to get or set */
++	uint32_t val;			/* the value (e.g. rate (in Hz)) to set */
++};
++
++/* message structure to be sent to videocore */
++struct vc_msg {
++	uint32_t msg_size;		/* simply, sizeof(struct vc_msg) */
++	uint32_t request_code;		/* holds various information like the success and number of bytes returned (refer to mailboxes wiki) */
++	struct vc_msg_tag tag;		/* the tag structure above to make */
++	uint32_t end_tag;		/* an end identifier, should be set to NULL */
++};
++
++/* ---------- GLOBALS ---------- */
++static struct cpufreq_driver bcm2835_cpufreq_driver;	/* the cpufreq driver global */
++
++/*
++ ===============================================
++  clk_rate either gets or sets the clock rates.
++ ===============================================
++*/
++static uint32_t bcm2835_cpufreq_set_clock(int cur_rate, int arm_rate)
++{
++	int s, actual_rate=0;
++	struct vc_msg msg;
++
++	/* wipe all previous message data */
++	memset(&msg, 0, sizeof msg);
++
++	msg.msg_size = sizeof msg;
++
++	msg.tag.tag_id = VCMSG_SET_CLOCK_RATE;
++	msg.tag.buffer_size = 8;
++	msg.tag.data_size = 8;   /* we're sending the clock ID and the new rates which is a total of 2 words */
++	msg.tag.dev_id = VCMSG_ID_ARM_CLOCK;
++	msg.tag.val = arm_rate * 1000;
++
++	/* send the message */
++	s = bcm_mailbox_property(&msg, sizeof msg);
++
++	/* check if it was all ok and return the rate in KHz */
++	if (s == 0 && (msg.request_code & 0x80000000))
++		actual_rate = msg.tag.val/1000;
++
++	print_debug("Setting new frequency = %d -> %d (actual %d)\n", cur_rate, arm_rate, actual_rate);
++	return actual_rate;
++}
++
++static uint32_t bcm2835_cpufreq_get_clock(int tag)
++{
++	int s;
++	int arm_rate = 0;
++	struct vc_msg msg;
++
++	/* wipe all previous message data */
++	memset(&msg, 0, sizeof msg);
++
++	msg.msg_size = sizeof msg;
++	msg.tag.tag_id = tag;
++	msg.tag.buffer_size = 8;
++	msg.tag.data_size = 4; /* we're just sending the clock ID which is one word long */
++	msg.tag.dev_id = VCMSG_ID_ARM_CLOCK;
++
++	/* send the message */
++	s = bcm_mailbox_property(&msg, sizeof msg);
++
++	/* check if it was all ok and return the rate in KHz */
++	if (s == 0 && (msg.request_code & 0x80000000))
++		arm_rate = msg.tag.val/1000;
++
++	print_debug("%s frequency = %d\n",
++		tag == VCMSG_GET_CLOCK_RATE ? "Current":
++		tag == VCMSG_GET_MIN_CLOCK ? "Min":
++		tag == VCMSG_GET_MAX_CLOCK ? "Max":
++		"Unexpected", arm_rate);
++
++	return arm_rate;
++}
++
++/*
++ ====================================================
++  Module Initialisation registers the cpufreq driver
++ ====================================================
++*/
++static int __init bcm2835_cpufreq_module_init(void)
++{
++	print_debug("IN\n");
++	return cpufreq_register_driver(&bcm2835_cpufreq_driver);
++}
++
++/*
++ =============
++  Module exit
++ =============
++*/
++static void __exit bcm2835_cpufreq_module_exit(void)
++{
++	print_debug("IN\n");
++	cpufreq_unregister_driver(&bcm2835_cpufreq_driver);
++	return;
++}
++
++/*
++ ==============================================================
++  Initialisation function sets up the CPU policy for first use
++ ==============================================================
++*/
++static int bcm2835_cpufreq_driver_init(struct cpufreq_policy *policy)
++{
++	/* measured value of how long it takes to change frequency */
++	policy->cpuinfo.transition_latency = 355000; /* ns */
++
++	/* now find out what the maximum and minimum frequencies are */
++	policy->min = policy->cpuinfo.min_freq = bcm2835_cpufreq_get_clock(VCMSG_GET_MIN_CLOCK);
++	policy->max = policy->cpuinfo.max_freq = bcm2835_cpufreq_get_clock(VCMSG_GET_MAX_CLOCK);
++	policy->cur = bcm2835_cpufreq_get_clock(VCMSG_GET_CLOCK_RATE);
++
++	print_info("min=%d max=%d cur=%d\n", policy->min, policy->max, policy->cur);
++	return 0;
++}
++
++/*
++ =================================================================================
++  Target function chooses the most appropriate frequency from the table to enable
++ =================================================================================
++*/
++
++static int bcm2835_cpufreq_driver_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation)
++{
++	unsigned int target = target_freq;
++#ifdef CPUFREQ_DEBUG_ENABLE
++	unsigned int cur = policy->cur;
++#endif
++	print_debug("%s: min=%d max=%d cur=%d target=%d\n",policy->governor->name,policy->min,policy->max,policy->cur,target_freq);
++
++	/* if we are above min and using ondemand, then just use max */
++	if (strcmp("ondemand", policy->governor->name)==0 && target > policy->min)
++		target = policy->max;
++	/* if the frequency is the same, just quit */
++	if (target == policy->cur)
++		return 0;
++
++	/* otherwise were good to set the clock frequency */
++	policy->cur = bcm2835_cpufreq_set_clock(policy->cur, target);
++
++	if (!policy->cur)
++	{
++		print_err("Error occurred setting a new frequency (%d)!\n", target);
++		policy->cur = bcm2835_cpufreq_get_clock(VCMSG_GET_CLOCK_RATE);
++		return -EINVAL;
++	}
++	print_debug("Freq %d->%d (min=%d max=%d target=%d request=%d)\n", cur, policy->cur, policy->min, policy->max, target_freq, target);
++	return 0;
++}
++
++static unsigned int bcm2835_cpufreq_driver_get(unsigned int cpu)
++{
++	unsigned int actual_rate = bcm2835_cpufreq_get_clock(VCMSG_GET_CLOCK_RATE);
++	print_debug("cpu=%d\n", actual_rate);
++	return actual_rate;
++}
++
++/*
++ =================================================================================
++  Verify ensures that when a policy is changed, it is suitable for the CPU to use
++ =================================================================================
++*/
++
++static int bcm2835_cpufreq_driver_verify(struct cpufreq_policy *policy)
++{
++	print_info("switching to governor %s\n", policy->governor->name);
++	return 0;
++}
++
++
++/* the CPUFreq driver */
++static struct cpufreq_driver bcm2835_cpufreq_driver = {
++		.name   = "BCM2835 CPUFreq",
++		.init   = bcm2835_cpufreq_driver_init,
++		.verify = bcm2835_cpufreq_driver_verify,
++		.target = bcm2835_cpufreq_driver_target,
++		.get    = bcm2835_cpufreq_driver_get
++};
++
++MODULE_AUTHOR("Dorian Peake and Dom Cobley");
++MODULE_DESCRIPTION("CPU frequency driver for BCM2835 chip");
++MODULE_LICENSE("GPL");
++
++module_init(bcm2835_cpufreq_module_init);
++module_exit(bcm2835_cpufreq_module_exit);
+diff -Nur linux-3.12.6/drivers/cpufreq/Kconfig.arm linux-raspberry-pi/drivers/cpufreq/Kconfig.arm
+--- linux-3.12.6/drivers/cpufreq/Kconfig.arm	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/cpufreq/Kconfig.arm	2013-12-29 10:40:38.000000000 +0100
+@@ -228,6 +228,14 @@
+ 	help
+ 	  This adds the CPUFreq driver support for SPEAr SOCs.
+ 
++config ARM_BCM2835_CPUFREQ
++	bool "BCM2835 Driver"
++	default y
++	help
++	  This adds the CPUFreq driver for BCM2835
++
++	  If in doubt, say N.
++
+ config ARM_TEGRA_CPUFREQ
+ 	bool "TEGRA CPUFreq support"
+ 	depends on ARCH_TEGRA
+diff -Nur linux-3.12.6/drivers/cpufreq/Makefile linux-raspberry-pi/drivers/cpufreq/Makefile
+--- linux-3.12.6/drivers/cpufreq/Makefile	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/cpufreq/Makefile	2013-12-29 10:40:38.000000000 +0100
+@@ -76,6 +76,7 @@
+ obj-$(CONFIG_ARM_SA1100_CPUFREQ)	+= sa1100-cpufreq.o
+ obj-$(CONFIG_ARM_SA1110_CPUFREQ)	+= sa1110-cpufreq.o
+ obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
++obj-$(CONFIG_ARM_BCM2835_CPUFREQ)	+= bcm2835-cpufreq.o
+ obj-$(CONFIG_ARM_TEGRA_CPUFREQ)		+= tegra-cpufreq.o
+ 
+ ##################################################################################
+diff -Nur linux-3.12.6/drivers/dma/bcm2708-dmaengine.c linux-raspberry-pi/drivers/dma/bcm2708-dmaengine.c
+--- linux-3.12.6/drivers/dma/bcm2708-dmaengine.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/dma/bcm2708-dmaengine.c	2013-12-29 10:40:38.000000000 +0100
+@@ -0,0 +1,588 @@
++/*
++ * BCM2708 DMA engine support
++ *
++ * This driver only supports cyclic DMA transfers
++ * as needed for the I2S module.
++ *
++ * Author:      Florian Meier <florian.meier@koalo.de>
++ *              Copyright 2013
++ *
++ * Based on
++ *	OMAP DMAengine support by Russell King
++ *
++ *	BCM2708 DMA Driver
++ *	Copyright (C) 2010 Broadcom
++ *
++ *	Raspberry Pi PCM I2S ALSA Driver
++ *	Copyright (c) by Phil Poole 2013
++ *
++ *	MARVELL MMP Peripheral DMA Driver
++ *	Copyright 2012 Marvell International Ltd.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++#include <linux/dmaengine.h>
++#include <linux/dma-mapping.h>
++#include <linux/err.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/list.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/slab.h>
++#include <linux/io.h>
++#include <linux/spinlock.h>
++#include <linux/irq.h>
++
++#include "virt-dma.h"
++
++#include <mach/dma.h>
++#include <mach/irqs.h>
++
++struct bcm2708_dmadev {
++	struct dma_device ddev;
++	spinlock_t lock;
++	void __iomem *base;
++	struct device_dma_parameters dma_parms;
++};
++
++struct bcm2708_chan {
++	struct virt_dma_chan vc;
++	struct list_head node;
++
++	struct dma_slave_config	cfg;
++	bool cyclic;
++
++	int ch;
++	struct bcm2708_desc *desc;
++
++	void __iomem *chan_base;
++	int irq_number;
++};
++
++struct bcm2708_desc {
++	struct virt_dma_desc vd;
++	enum dma_transfer_direction dir;
++
++	unsigned int control_block_size;
++	struct bcm2708_dma_cb *control_block_base;
++	dma_addr_t control_block_base_phys;
++
++	unsigned frames;
++	size_t size;
++};
++
++#define BCM2708_DMA_DATA_TYPE_S8	1
++#define BCM2708_DMA_DATA_TYPE_S16	2
++#define BCM2708_DMA_DATA_TYPE_S32	4
++#define BCM2708_DMA_DATA_TYPE_S128	16
++
++static inline struct bcm2708_dmadev *to_bcm2708_dma_dev(struct dma_device *d)
++{
++	return container_of(d, struct bcm2708_dmadev, ddev);
++}
++
++static inline struct bcm2708_chan *to_bcm2708_dma_chan(struct dma_chan *c)
++{
++	return container_of(c, struct bcm2708_chan, vc.chan);
++}
++
++static inline struct bcm2708_desc *to_bcm2708_dma_desc(
++		struct dma_async_tx_descriptor *t)
++{
++	return container_of(t, struct bcm2708_desc, vd.tx);
++}
++
++static void bcm2708_dma_desc_free(struct virt_dma_desc *vd)
++{
++	struct bcm2708_desc *desc = container_of(vd, struct bcm2708_desc, vd);
++	dma_free_coherent(desc->vd.tx.chan->device->dev,
++			desc->control_block_size,
++			desc->control_block_base,
++			desc->control_block_base_phys);
++	kfree(desc);
++}
++
++static void bcm2708_dma_start_desc(struct bcm2708_chan *c)
++{
++	struct virt_dma_desc *vd = vchan_next_desc(&c->vc);
++	struct bcm2708_desc *d;
++
++	if (!vd) {
++		c->desc = NULL;
++		return;
++	}
++
++	list_del(&vd->node);
++
++	c->desc = d = to_bcm2708_dma_desc(&vd->tx);
++
++	bcm_dma_start(c->chan_base, d->control_block_base_phys);
++}
++
++static irqreturn_t bcm2708_dma_callback(int irq, void *data)
++{
++	struct bcm2708_chan *c = data;
++	struct bcm2708_desc *d;
++	unsigned long flags;
++
++	spin_lock_irqsave(&c->vc.lock, flags);
++
++	/* Acknowledge interrupt */
++	writel(BCM2708_DMA_INT, c->chan_base + BCM2708_DMA_CS);
++
++	d = c->desc;
++
++	if (d) {
++		/* TODO Only works for cyclic DMA */
++		vchan_cyclic_callback(&d->vd);
++	}
++
++	/* Keep the DMA engine running */
++	dsb(); /* ARM synchronization barrier */
++	writel(BCM2708_DMA_ACTIVE, c->chan_base + BCM2708_DMA_CS);
++
++	spin_unlock_irqrestore(&c->vc.lock, flags);
++
++	return IRQ_HANDLED;
++}
++
++static int bcm2708_dma_alloc_chan_resources(struct dma_chan *chan)
++{
++	struct bcm2708_chan *c = to_bcm2708_dma_chan(chan);
++
++	return request_irq(c->irq_number,
++			bcm2708_dma_callback, 0, "DMA IRQ", c);
++}
++
++static void bcm2708_dma_free_chan_resources(struct dma_chan *chan)
++{
++	struct bcm2708_chan *c = to_bcm2708_dma_chan(chan);
++
++	vchan_free_chan_resources(&c->vc);
++	free_irq(c->irq_number, c);
++
++	dev_dbg(c->vc.chan.device->dev, "Freeing DMA channel %u\n", c->ch);
++}
++
++static size_t bcm2708_dma_desc_size(struct bcm2708_desc *d)
++{
++	return d->size;
++}
++
++static size_t bcm2708_dma_desc_size_pos(struct bcm2708_desc *d, dma_addr_t addr)
++{
++	unsigned i;
++	size_t size;
++
++	for (size = i = 0; i < d->frames; i++) {
++		struct bcm2708_dma_cb *control_block =
++			&d->control_block_base[i];
++		size_t this_size = control_block->length;
++		dma_addr_t dma;
++
++		if (d->dir == DMA_DEV_TO_MEM)
++			dma = control_block->dst;
++		else
++			dma = control_block->src;
++
++		if (size)
++			size += this_size;
++		else if (addr >= dma && addr < dma + this_size)
++			size += dma + this_size - addr;
++	}
++
++	return size;
++}
++
++static enum dma_status bcm2708_dma_tx_status(struct dma_chan *chan,
++	dma_cookie_t cookie, struct dma_tx_state *txstate)
++{
++	struct bcm2708_chan *c = to_bcm2708_dma_chan(chan);
++	struct virt_dma_desc *vd;
++	enum dma_status ret;
++	unsigned long flags;
++
++	ret = dma_cookie_status(chan, cookie, txstate);
++	if (ret == DMA_SUCCESS || !txstate)
++		return ret;
++
++	spin_lock_irqsave(&c->vc.lock, flags);
++	vd = vchan_find_desc(&c->vc, cookie);
++	if (vd) {
++		txstate->residue =
++			bcm2708_dma_desc_size(to_bcm2708_dma_desc(&vd->tx));
++	} else if (c->desc && c->desc->vd.tx.cookie == cookie) {
++		struct bcm2708_desc *d = c->desc;
++		dma_addr_t pos;
++
++		if (d->dir == DMA_MEM_TO_DEV)
++			pos = readl(c->chan_base + BCM2708_DMA_SOURCE_AD);
++		else if (d->dir == DMA_DEV_TO_MEM)
++			pos = readl(c->chan_base + BCM2708_DMA_DEST_AD);
++		else
++			pos = 0;
++
++		txstate->residue = bcm2708_dma_desc_size_pos(d, pos);
++	} else {
++		txstate->residue = 0;
++	}
++
++	spin_unlock_irqrestore(&c->vc.lock, flags);
++
++	return ret;
++}
++
++static void bcm2708_dma_issue_pending(struct dma_chan *chan)
++{
++	struct bcm2708_chan *c = to_bcm2708_dma_chan(chan);
++	unsigned long flags;
++
++	c->cyclic = true; /* Nothing else is implemented */
++
++	spin_lock_irqsave(&c->vc.lock, flags);
++	if (vchan_issue_pending(&c->vc) && !c->desc)
++		bcm2708_dma_start_desc(c);
++
++	spin_unlock_irqrestore(&c->vc.lock, flags);
++}
++
++static struct dma_async_tx_descriptor *bcm2708_dma_prep_dma_cyclic(
++	struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
++	size_t period_len, enum dma_transfer_direction direction,
++	unsigned long flags, void *context)
++{
++	struct bcm2708_chan *c = to_bcm2708_dma_chan(chan);
++	enum dma_slave_buswidth dev_width;
++	struct bcm2708_desc *d;
++	dma_addr_t dev_addr;
++	unsigned es, sync_type;
++	unsigned frame;
++
++	/* Grab configuration */
++	if (direction == DMA_DEV_TO_MEM) {
++		dev_addr = c->cfg.src_addr;
++		dev_width = c->cfg.src_addr_width;
++		sync_type = BCM2708_DMA_S_DREQ;
++	} else if (direction == DMA_MEM_TO_DEV) {
++		dev_addr = c->cfg.dst_addr;
++		dev_width = c->cfg.dst_addr_width;
++		sync_type = BCM2708_DMA_D_DREQ;
++	} else {
++		dev_err(chan->device->dev, "%s: bad direction?\n", __func__);
++		return NULL;
++	}
++
++	/* Bus width translates to the element size (ES) */
++	switch (dev_width) {
++	case DMA_SLAVE_BUSWIDTH_4_BYTES:
++		es = BCM2708_DMA_DATA_TYPE_S32;
++		break;
++	default:
++		return NULL;
++	}
++
++	/* Now allocate and setup the descriptor. */
++	d = kzalloc(sizeof(*d), GFP_NOWAIT);
++	if (!d)
++		return NULL;
++
++	d->dir = direction;
++	d->frames = buf_len / period_len;
++
++	/* Allocate memory for control blocks */
++	d->control_block_size = d->frames * sizeof(struct bcm2708_dma_cb);
++	d->control_block_base = dma_zalloc_coherent(chan->device->dev,
++			d->control_block_size, &d->control_block_base_phys,
++			GFP_NOWAIT);
++
++	if (!d->control_block_base) {
++		kfree(d);
++		return NULL;
++	}
++
++	/*
++	 * Iterate over all frames, create a control block
++	 * for each frame and link them together.
++	 */
++	for (frame = 0; frame < d->frames; frame++) {
++		struct bcm2708_dma_cb *control_block =
++			&d->control_block_base[frame];
++
++		/* Setup adresses */
++		if (d->dir == DMA_DEV_TO_MEM) {
++			control_block->info = BCM2708_DMA_D_INC;
++			control_block->src = dev_addr;
++			control_block->dst = buf_addr + frame * period_len;
++		} else {
++			control_block->info = BCM2708_DMA_S_INC;
++			control_block->src = buf_addr + frame * period_len;
++			control_block->dst = dev_addr;
++		}
++
++		/* Enable interrupt */
++		control_block->info |= BCM2708_DMA_INT_EN;
++
++		/* Setup synchronization */
++		if (sync_type != 0)
++			control_block->info |= sync_type;
++
++		/* Setup DREQ channel */
++		if (c->cfg.slave_id != 0)
++			control_block->info |=
++				BCM2708_DMA_PER_MAP(c->cfg.slave_id);
++
++		/* Length of a frame */
++		control_block->length = period_len;
++		d->size += control_block->length;
++
++		/*
++		 * Next block is the next frame.
++		 * This DMA engine driver currently only supports cyclic DMA.
++		 * Therefore, wrap around at number of frames.
++		 */
++		control_block->next = d->control_block_base_phys +
++			sizeof(struct bcm2708_dma_cb)
++			* ((frame + 1) % d->frames);
++	}
++
++	return vchan_tx_prep(&c->vc, &d->vd, flags);
++}
++
++static int bcm2708_dma_slave_config(struct bcm2708_chan *c,
++		struct dma_slave_config *cfg)
++{
++	if ((cfg->direction == DMA_DEV_TO_MEM &&
++	     cfg->src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) ||
++	    (cfg->direction == DMA_MEM_TO_DEV &&
++	     cfg->dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) ||
++	    !is_slave_direction(cfg->direction)) {
++		return -EINVAL;
++	}
++
++	c->cfg = *cfg;
++
++	return 0;
++}
++
++static int bcm2708_dma_terminate_all(struct bcm2708_chan *c)
++{
++	struct bcm2708_dmadev *d = to_bcm2708_dma_dev(c->vc.chan.device);
++	unsigned long flags;
++	int timeout = 10000;
++	LIST_HEAD(head);
++
++	spin_lock_irqsave(&c->vc.lock, flags);
++
++	/* Prevent this channel being scheduled */
++	spin_lock(&d->lock);
++	list_del_init(&c->node);
++	spin_unlock(&d->lock);
++
++	/*
++	 * Stop DMA activity: we assume the callback will not be called
++	 * after bcm_dma_abort() returns (even if it does, it will see
++	 * c->desc is NULL and exit.)
++	 */
++	if (c->desc) {
++		c->desc = NULL;
++		bcm_dma_abort(c->chan_base);
++
++		/* Wait for stopping */
++		while (timeout > 0) {
++			timeout--;
++			if (!(readl(c->chan_base + BCM2708_DMA_CS) &
++						BCM2708_DMA_ACTIVE))
++				break;
++
++			cpu_relax();
++		}
++
++		if (timeout <= 0)
++			dev_err(d->ddev.dev, "DMA transfer could not be terminated\n");
++	}
++
++	vchan_get_all_descriptors(&c->vc, &head);
++	spin_unlock_irqrestore(&c->vc.lock, flags);
++	vchan_dma_desc_free_list(&c->vc, &head);
++
++	return 0;
++}
++
++static int bcm2708_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
++	unsigned long arg)
++{
++	struct bcm2708_chan *c = to_bcm2708_dma_chan(chan);
++
++	switch (cmd) {
++	case DMA_SLAVE_CONFIG:
++		return bcm2708_dma_slave_config(c,
++				(struct dma_slave_config *)arg);
++
++	case DMA_TERMINATE_ALL:
++		return bcm2708_dma_terminate_all(c);
++
++	default:
++		return -ENXIO;
++	}
++}
++
++static int bcm2708_dma_chan_init(struct bcm2708_dmadev *d, void __iomem* chan_base,
++									int chan_id, int irq)
++{
++	struct bcm2708_chan *c;
++
++	c = devm_kzalloc(d->ddev.dev, sizeof(*c), GFP_KERNEL);
++	if (!c)
++		return -ENOMEM;
++
++	c->vc.desc_free = bcm2708_dma_desc_free;
++	vchan_init(&c->vc, &d->ddev);
++	INIT_LIST_HEAD(&c->node);
++
++	d->ddev.chancnt++;
++
++	c->chan_base = chan_base;
++	c->ch = chan_id;
++	c->irq_number = irq;
++
++	return 0;
++}
++
++static void bcm2708_dma_free(struct bcm2708_dmadev *od)
++{
++	while (!list_empty(&od->ddev.channels)) {
++		struct bcm2708_chan *c = list_first_entry(&od->ddev.channels,
++			struct bcm2708_chan, vc.chan.device_node);
++
++		list_del(&c->vc.chan.device_node);
++		tasklet_kill(&c->vc.task);
++	}
++}
++
++static int bcm2708_dma_probe(struct platform_device *pdev)
++{
++	struct bcm2708_dmadev *od;
++	int rc, i;
++
++	if (!pdev->dev.dma_mask)
++		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
++
++	rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
++	if (rc)
++		return rc;
++	dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
++
++	od = devm_kzalloc(&pdev->dev, sizeof(*od), GFP_KERNEL);
++	if (!od)
++		return -ENOMEM;
++
++	pdev->dev.dma_parms = &od->dma_parms;
++	dma_set_max_seg_size(&pdev->dev, 0x3FFFFFFF);
++
++	dma_cap_set(DMA_SLAVE, od->ddev.cap_mask);
++	dma_cap_set(DMA_CYCLIC, od->ddev.cap_mask);
++	od->ddev.device_alloc_chan_resources = bcm2708_dma_alloc_chan_resources;
++	od->ddev.device_free_chan_resources = bcm2708_dma_free_chan_resources;
++	od->ddev.device_tx_status = bcm2708_dma_tx_status;
++	od->ddev.device_issue_pending = bcm2708_dma_issue_pending;
++	od->ddev.device_prep_dma_cyclic = bcm2708_dma_prep_dma_cyclic;
++	od->ddev.device_control = bcm2708_dma_control;
++	od->ddev.dev = &pdev->dev;
++	INIT_LIST_HEAD(&od->ddev.channels);
++	spin_lock_init(&od->lock);
++
++	platform_set_drvdata(pdev, od);
++
++	for (i = 0; i < 16; i++) {
++		void __iomem* chan_base;
++		int chan_id, irq;
++
++		chan_id = bcm_dma_chan_alloc(BCM_DMA_FEATURE_FAST,
++			&chan_base,
++			&irq);
++
++		if (chan_id < 0)
++			break;
++
++		rc = bcm2708_dma_chan_init(od, chan_base, chan_id, irq);
++		if (rc) {
++			bcm2708_dma_free(od);
++			return rc;
++		}
++	}
++
++	rc = dma_async_device_register(&od->ddev);
++	if (rc) {
++		dev_err(&pdev->dev,
++			"Failed to register slave DMA engine device: %d\n", rc);
++		bcm2708_dma_free(od);
++		return rc;
++	}
++
++	dev_dbg(&pdev->dev, "Load BCM2708 DMA engine driver\n");
++
++	return rc;
++}
++
++static int bcm2708_dma_remove(struct platform_device *pdev)
++{
++	struct bcm2708_dmadev *od = platform_get_drvdata(pdev);
++
++	dma_async_device_unregister(&od->ddev);
++	bcm2708_dma_free(od);
++
++	return 0;
++}
++
++static struct platform_driver bcm2708_dma_driver = {
++	.probe	= bcm2708_dma_probe,
++	.remove	= bcm2708_dma_remove,
++	.driver = {
++		.name = "bcm2708-dmaengine",
++		.owner = THIS_MODULE,
++	},
++};
++
++static struct platform_device *pdev;
++
++static const struct platform_device_info bcm2708_dma_dev_info = {
++	.name = "bcm2708-dmaengine",
++	.id = -1,
++};
++
++static int bcm2708_dma_init(void)
++{
++	int rc = platform_driver_register(&bcm2708_dma_driver);
++
++	if (rc == 0) {
++		pdev = platform_device_register_full(&bcm2708_dma_dev_info);
++		if (IS_ERR(pdev)) {
++			platform_driver_unregister(&bcm2708_dma_driver);
++			rc = PTR_ERR(pdev);
++		}
++	}
++
++	return rc;
++}
++subsys_initcall(bcm2708_dma_init);
++
++static void __exit bcm2708_dma_exit(void)
++{
++	platform_device_unregister(pdev);
++	platform_driver_unregister(&bcm2708_dma_driver);
++}
++module_exit(bcm2708_dma_exit);
++
++MODULE_ALIAS("platform:bcm2708-dma");
++MODULE_DESCRIPTION("BCM2708 DMA engine driver");
++MODULE_AUTHOR("Florian Meier <florian.meier@koalo.de>");
++MODULE_LICENSE("GPL v2");
+diff -Nur linux-3.12.6/drivers/dma/Kconfig linux-raspberry-pi/drivers/dma/Kconfig
+--- linux-3.12.6/drivers/dma/Kconfig	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/dma/Kconfig	2013-12-29 10:40:38.000000000 +0100
+@@ -288,6 +288,12 @@
+ 	select DMA_ENGINE
+ 	select DMA_VIRTUAL_CHANNELS
+ 
++config DMA_BCM2708
++	tristate "BCM2708 DMA engine support"
++	depends on MACH_BCM2708
++	select DMA_ENGINE
++	select DMA_VIRTUAL_CHANNELS
++
+ config TI_CPPI41
+ 	tristate "AM33xx CPPI41 DMA support"
+ 	depends on ARCH_OMAP
+diff -Nur linux-3.12.6/drivers/dma/Makefile linux-raspberry-pi/drivers/dma/Makefile
+--- linux-3.12.6/drivers/dma/Makefile	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/dma/Makefile	2013-12-29 10:40:38.000000000 +0100
+@@ -37,6 +37,7 @@
+ obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o
+ obj-$(CONFIG_MMP_TDMA) += mmp_tdma.o
+ obj-$(CONFIG_DMA_OMAP) += omap-dma.o
++obj-$(CONFIG_DMA_BCM2708) += bcm2708-dmaengine.o
+ obj-$(CONFIG_MMP_PDMA) += mmp_pdma.o
+ obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o
+ obj-$(CONFIG_TI_CPPI41) += cppi41.o
+diff -Nur linux-3.12.6/drivers/hwmon/bcm2835-hwmon.c linux-raspberry-pi/drivers/hwmon/bcm2835-hwmon.c
+--- linux-3.12.6/drivers/hwmon/bcm2835-hwmon.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/hwmon/bcm2835-hwmon.c	2013-12-29 10:40:39.000000000 +0100
+@@ -0,0 +1,219 @@
++/*****************************************************************************
++* Copyright 2011 Broadcom Corporation.  All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/hwmon.h>
++#include <linux/hwmon-sysfs.h>
++#include <linux/platform_device.h>
++#include <linux/sysfs.h>
++#include <mach/vcio.h>
++#include <linux/slab.h>
++#include <linux/err.h>
++
++#define MODULE_NAME "bcm2835_hwmon"
++
++/*#define HWMON_DEBUG_ENABLE*/
++
++#ifdef HWMON_DEBUG_ENABLE
++#define print_debug(fmt,...) printk(KERN_INFO "%s:%s:%d: "fmt"\n", MODULE_NAME, __func__, __LINE__, ##__VA_ARGS__)
++#else
++#define print_debug(fmt,...)
++#endif
++#define print_err(fmt,...) printk(KERN_ERR "%s:%s:%d: "fmt"\n", MODULE_NAME, __func__,__LINE__, ##__VA_ARGS__)
++#define print_info(fmt,...) printk(KERN_INFO "%s: "fmt"\n", MODULE_NAME, ##__VA_ARGS__)
++
++#define VC_TAG_GET_TEMP 0x00030006
++#define VC_TAG_GET_MAX_TEMP 0x0003000A
++
++/* --- STRUCTS --- */
++struct bcm2835_hwmon_data {
++	struct device *hwmon_dev;
++};
++
++/* tag part of the message */
++struct vc_msg_tag {
++	uint32_t tag_id;		/* the tag ID for the temperature */
++	uint32_t buffer_size;	/* size of the buffer (should be 8) */
++	uint32_t request_code;	/* identifies message as a request (should be 0) */
++	uint32_t id;			/* extra ID field (should be 0) */
++	uint32_t val;			/* returned value of the temperature */
++};
++
++/* message structure to be sent to videocore */
++struct vc_msg {
++	uint32_t msg_size;		/* simply, sizeof(struct vc_msg) */
++	uint32_t request_code;		/* holds various information like the success and number of bytes returned (refer to mailboxes wiki) */
++	struct vc_msg_tag tag;		/* the tag structure above to make */
++	uint32_t end_tag;		/* an end identifier, should be set to NULL */
++};
++
++typedef enum {
++	TEMP,
++	MAX_TEMP,
++} temp_type;
++
++/* --- PROTOTYPES --- */
++static ssize_t bcm2835_get_temp(struct device *dev, struct device_attribute *attr, char *buf);
++static ssize_t bcm2835_get_name(struct device *dev, struct device_attribute *attr, char *buf);
++
++/* --- GLOBALS --- */
++
++static struct bcm2835_hwmon_data *bcm2835_data;
++static struct platform_driver bcm2835_hwmon_driver;
++
++static SENSOR_DEVICE_ATTR(name, S_IRUGO,bcm2835_get_name,NULL,0);
++static SENSOR_DEVICE_ATTR(temp1_input,S_IRUGO,bcm2835_get_temp,NULL,TEMP);
++static SENSOR_DEVICE_ATTR(temp1_max,S_IRUGO,bcm2835_get_temp,NULL,MAX_TEMP);
++
++static struct attribute* bcm2835_attributes[] = {
++	&sensor_dev_attr_name.dev_attr.attr,
++	&sensor_dev_attr_temp1_input.dev_attr.attr,
++	&sensor_dev_attr_temp1_max.dev_attr.attr,
++	NULL,
++};
++
++static struct attribute_group bcm2835_attr_group = {
++	.attrs = bcm2835_attributes,
++};
++
++/* --- FUNCTIONS --- */
++
++static ssize_t bcm2835_get_name(struct device *dev, struct device_attribute *attr, char *buf)
++{
++	return sprintf(buf,"bcm2835_hwmon\n");
++}
++
++static ssize_t bcm2835_get_temp(struct device *dev, struct device_attribute *attr, char *buf)
++{
++	struct vc_msg msg;
++	int result;
++	uint temp = 0;
++	int index = ((struct sensor_device_attribute*)to_sensor_dev_attr(attr))->index;
++
++	print_debug("IN");
++
++	/* wipe all previous message data */
++	memset(&msg, 0, sizeof msg);
++
++	/* determine the message type */
++	if(index == TEMP)
++		msg.tag.tag_id = VC_TAG_GET_TEMP;
++	else if (index == MAX_TEMP)
++		msg.tag.tag_id = VC_TAG_GET_MAX_TEMP;
++	else
++	{
++		print_debug("Unknown temperature message!");
++		return -EINVAL;
++	}
++
++	msg.msg_size = sizeof msg;
++	msg.tag.buffer_size = 8;
++
++	/* send the message */
++	result = bcm_mailbox_property(&msg, sizeof msg);
++
++	/* check if it was all ok and return the rate in milli degrees C */
++	if (result == 0 && (msg.request_code & 0x80000000))
++		temp = (uint)msg.tag.val;
++	#ifdef HWMON_DEBUG_ENABLE
++	else
++		print_debug("Failed to get temperature!");
++	#endif
++	print_debug("Got temperature as %u",temp);
++	print_debug("OUT");
++	return sprintf(buf, "%u\n", temp);
++}
++
++
++static int bcm2835_hwmon_probe(struct platform_device *pdev)
++{
++	int err;
++
++	print_debug("IN");
++	print_debug("HWMON Driver has been probed!");
++
++	/* check that the device isn't null!*/
++	if(pdev == NULL)
++	{
++		print_debug("Platform device is empty!");
++		return -ENODEV;
++	}
++
++	/* allocate memory for neccessary data */
++	bcm2835_data = kzalloc(sizeof(struct bcm2835_hwmon_data),GFP_KERNEL);
++	if(!bcm2835_data)
++	{
++		print_debug("Unable to allocate memory for hwmon data!");
++		err = -ENOMEM;
++		goto kzalloc_error;
++	}
++
++	/* create the sysfs files */
++	if(sysfs_create_group(&pdev->dev.kobj, &bcm2835_attr_group))
++	{
++		print_debug("Unable to create sysfs files!");
++		err = -EFAULT;
++		goto sysfs_error;
++	}
++
++	/* register the hwmon device */
++	bcm2835_data->hwmon_dev = hwmon_device_register(&pdev->dev);
++	if (IS_ERR(bcm2835_data->hwmon_dev))
++	{
++		err = PTR_ERR(bcm2835_data->hwmon_dev);
++		goto hwmon_error;
++	}
++	print_debug("OUT");
++	return 0;
++
++	/* error goto's */
++	hwmon_error:
++	sysfs_remove_group(&pdev->dev.kobj, &bcm2835_attr_group);
++
++	sysfs_error:
++	kfree(bcm2835_data);
++
++	kzalloc_error:
++
++	return err;
++
++}
++
++static int bcm2835_hwmon_remove(struct platform_device *pdev)
++{
++	print_debug("IN");
++	hwmon_device_unregister(bcm2835_data->hwmon_dev);
++
++	sysfs_remove_group(&pdev->dev.kobj, &bcm2835_attr_group);
++	print_debug("OUT");
++	return 0;
++}
++
++/* Hwmon Driver */
++static struct platform_driver bcm2835_hwmon_driver = {
++	.probe = bcm2835_hwmon_probe,
++	.remove = bcm2835_hwmon_remove,
++	.driver = {
++				.name = "bcm2835_hwmon",
++				.owner = THIS_MODULE,
++			},
++};
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Dorian Peake");
++MODULE_DESCRIPTION("HW Monitor driver for bcm2835 chip");
++
++module_platform_driver(bcm2835_hwmon_driver);
+diff -Nur linux-3.12.6/drivers/hwmon/Kconfig linux-raspberry-pi/drivers/hwmon/Kconfig
+--- linux-3.12.6/drivers/hwmon/Kconfig	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/hwmon/Kconfig	2013-12-29 10:40:39.000000000 +0100
+@@ -1553,6 +1553,16 @@
+         help
+           Support for the A/D converter on MC13783 and MC13892 PMIC.
+ 
++config SENSORS_BCM2835
++	depends on THERMAL_BCM2835=n
++	tristate "Broadcom BCM2835 HWMON Driver"
++	help
++	  If you say yes here you get support for the hardware
++	  monitoring features of the BCM2835 Chip
++
++	  This driver can also be built as a module.  If so, the module
++	  will be called bcm2835-hwmon.
++
+ if ACPI
+ 
+ comment "ACPI drivers"
+diff -Nur linux-3.12.6/drivers/hwmon/Makefile linux-raspberry-pi/drivers/hwmon/Makefile
+--- linux-3.12.6/drivers/hwmon/Makefile	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/hwmon/Makefile	2013-12-29 10:40:39.000000000 +0100
+@@ -142,6 +142,7 @@
+ obj-$(CONFIG_SENSORS_W83L786NG)	+= w83l786ng.o
+ obj-$(CONFIG_SENSORS_WM831X)	+= wm831x-hwmon.o
+ obj-$(CONFIG_SENSORS_WM8350)	+= wm8350-hwmon.o
++obj-$(CONFIG_SENSORS_BCM2835)	+= bcm2835-hwmon.o
+ 
+ obj-$(CONFIG_PMBUS)		+= pmbus/
+ 
+diff -Nur linux-3.12.6/drivers/i2c/busses/i2c-bcm2708.c linux-raspberry-pi/drivers/i2c/busses/i2c-bcm2708.c
+--- linux-3.12.6/drivers/i2c/busses/i2c-bcm2708.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/i2c/busses/i2c-bcm2708.c	2013-12-29 10:40:39.000000000 +0100
+@@ -0,0 +1,408 @@
++/*
++ * Driver for Broadcom BCM2708 BSC Controllers
++ *
++ * Copyright (C) 2012 Chris Boot & Frank Buss
++ *
++ * This driver is inspired by:
++ * i2c-ocores.c, by Peter Korsgaard <jacmet@sunsite.dk>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/spinlock.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/slab.h>
++#include <linux/i2c.h>
++#include <linux/interrupt.h>
++#include <linux/sched.h>
++#include <linux/wait.h>
++
++/* BSC register offsets */
++#define BSC_C			0x00
++#define BSC_S			0x04
++#define BSC_DLEN		0x08
++#define BSC_A			0x0c
++#define BSC_FIFO		0x10
++#define BSC_DIV			0x14
++#define BSC_DEL			0x18
++#define BSC_CLKT		0x1c
++
++/* Bitfields in BSC_C */
++#define BSC_C_I2CEN		0x00008000
++#define BSC_C_INTR		0x00000400
++#define BSC_C_INTT		0x00000200
++#define BSC_C_INTD		0x00000100
++#define BSC_C_ST		0x00000080
++#define BSC_C_CLEAR_1		0x00000020
++#define BSC_C_CLEAR_2		0x00000010
++#define BSC_C_READ		0x00000001
++
++/* Bitfields in BSC_S */
++#define BSC_S_CLKT		0x00000200
++#define BSC_S_ERR		0x00000100
++#define BSC_S_RXF		0x00000080
++#define BSC_S_TXE		0x00000040
++#define BSC_S_RXD		0x00000020
++#define BSC_S_TXD		0x00000010
++#define BSC_S_RXR		0x00000008
++#define BSC_S_TXW		0x00000004
++#define BSC_S_DONE		0x00000002
++#define BSC_S_TA		0x00000001
++
++#define I2C_TIMEOUT_MS	150
++
++#define DRV_NAME	"bcm2708_i2c"
++
++static unsigned int baudrate = CONFIG_I2C_BCM2708_BAUDRATE;
++module_param(baudrate, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP);
++MODULE_PARM_DESC(baudrate, "The I2C baudrate");
++
++
++struct bcm2708_i2c {
++	struct i2c_adapter adapter;
++
++	spinlock_t lock;
++	void __iomem *base;
++	int irq;
++	struct clk *clk;
++
++	struct completion done;
++
++	struct i2c_msg *msg;
++	int pos;
++	int nmsgs;
++	bool error;
++};
++
++/*
++ * This function sets the ALT mode on the I2C pins so that we can use them with
++ * the BSC hardware.
++ *
++ * FIXME: This is a hack. Use pinmux / pinctrl.
++ */
++static void bcm2708_i2c_init_pinmode(int id)
++{
++#define INP_GPIO(g) *(gpio+((g)/10)) &= ~(7<<(((g)%10)*3))
++#define SET_GPIO_ALT(g,a) *(gpio+(((g)/10))) |= (((a)<=3?(a)+4:(a)==4?3:2)<<(((g)%10)*3))
++
++	int pin;
++	u32 *gpio = ioremap(0x20200000, SZ_16K);
++
++        BUG_ON(id != 0 && id != 1);
++	/* BSC0 is on GPIO 0 & 1, BSC1 is on GPIO 2 & 3 */
++	for (pin = id*2+0; pin <= id*2+1; pin++) {
++printk("bcm2708_i2c_init_pinmode(%d,%d)\n", id, pin);
++		INP_GPIO(pin);		/* set mode to GPIO input first */
++		SET_GPIO_ALT(pin, 0);	/* set mode to ALT 0 */
++	}
++
++	iounmap(gpio);
++
++#undef INP_GPIO
++#undef SET_GPIO_ALT
++}
++
++static inline u32 bcm2708_rd(struct bcm2708_i2c *bi, unsigned reg)
++{
++	return readl(bi->base + reg);
++}
++
++static inline void bcm2708_wr(struct bcm2708_i2c *bi, unsigned reg, u32 val)
++{
++	writel(val, bi->base + reg);
++}
++
++static inline void bcm2708_bsc_reset(struct bcm2708_i2c *bi)
++{
++	bcm2708_wr(bi, BSC_C, 0);
++	bcm2708_wr(bi, BSC_S, BSC_S_CLKT | BSC_S_ERR | BSC_S_DONE);
++}
++
++static inline void bcm2708_bsc_fifo_drain(struct bcm2708_i2c *bi)
++{
++	while ((bcm2708_rd(bi, BSC_S) & BSC_S_RXD) && (bi->pos < bi->msg->len))
++		bi->msg->buf[bi->pos++] = bcm2708_rd(bi, BSC_FIFO);
++}
++
++static inline void bcm2708_bsc_fifo_fill(struct bcm2708_i2c *bi)
++{
++	while ((bcm2708_rd(bi, BSC_S) & BSC_S_TXD) && (bi->pos < bi->msg->len))
++		bcm2708_wr(bi, BSC_FIFO, bi->msg->buf[bi->pos++]);
++}
++
++static inline void bcm2708_bsc_setup(struct bcm2708_i2c *bi)
++{
++	unsigned long bus_hz;
++	u32 cdiv;
++	u32 c = BSC_C_I2CEN | BSC_C_INTD | BSC_C_ST | BSC_C_CLEAR_1;
++
++	bus_hz = clk_get_rate(bi->clk);
++	cdiv = bus_hz / baudrate;
++
++	if (bi->msg->flags & I2C_M_RD)
++		c |= BSC_C_INTR | BSC_C_READ;
++	else
++		c |= BSC_C_INTT;
++
++	bcm2708_wr(bi, BSC_DIV, cdiv);
++	bcm2708_wr(bi, BSC_A, bi->msg->addr);
++	bcm2708_wr(bi, BSC_DLEN, bi->msg->len);
++	bcm2708_wr(bi, BSC_C, c);
++}
++
++static irqreturn_t bcm2708_i2c_interrupt(int irq, void *dev_id)
++{
++	struct bcm2708_i2c *bi = dev_id;
++	bool handled = true;
++	u32 s;
++
++	spin_lock(&bi->lock);
++
++	/* we may see camera interrupts on the "other" I2C channel
++           Just return if we've not sent anything */
++        if (!bi->nmsgs || !bi->msg )
++		goto early_exit;
++
++	s = bcm2708_rd(bi, BSC_S);
++
++	if (s & (BSC_S_CLKT | BSC_S_ERR)) {
++		bcm2708_bsc_reset(bi);
++		bi->error = true;
++
++		/* wake up our bh */
++		complete(&bi->done);
++	} else if (s & BSC_S_DONE) {
++		bi->nmsgs--;
++
++		if (bi->msg->flags & I2C_M_RD)
++			bcm2708_bsc_fifo_drain(bi);
++
++		bcm2708_bsc_reset(bi);
++
++		if (bi->nmsgs) {
++			/* advance to next message */
++			bi->msg++;
++			bi->pos = 0;
++			bcm2708_bsc_setup(bi);
++		} else {
++			/* wake up our bh */
++			complete(&bi->done);
++		}
++	} else if (s & BSC_S_TXW) {
++		bcm2708_bsc_fifo_fill(bi);
++	} else if (s & BSC_S_RXR) {
++		bcm2708_bsc_fifo_drain(bi);
++	} else {
++		handled = false;
++	}
++
++early_exit:
++	spin_unlock(&bi->lock);
++
++	return handled ? IRQ_HANDLED : IRQ_NONE;
++}
++
++static int bcm2708_i2c_master_xfer(struct i2c_adapter *adap,
++	struct i2c_msg *msgs, int num)
++{
++	struct bcm2708_i2c *bi = adap->algo_data;
++	unsigned long flags;
++	int ret;
++
++	spin_lock_irqsave(&bi->lock, flags);
++
++	INIT_COMPLETION(bi->done);
++	bi->msg = msgs;
++	bi->pos = 0;
++	bi->nmsgs = num;
++	bi->error = false;
++
++	spin_unlock_irqrestore(&bi->lock, flags);
++
++	bcm2708_bsc_setup(bi);
++
++	ret = wait_for_completion_timeout(&bi->done,
++			msecs_to_jiffies(I2C_TIMEOUT_MS));
++	if (ret == 0) {
++		dev_err(&adap->dev, "transfer timed out\n");
++		spin_lock_irqsave(&bi->lock, flags);
++		bcm2708_bsc_reset(bi);
++		spin_unlock_irqrestore(&bi->lock, flags);
++		return -ETIMEDOUT;
++	}
++
++	return bi->error ? -EIO : num;
++}
++
++static u32 bcm2708_i2c_functionality(struct i2c_adapter *adap)
++{
++	return I2C_FUNC_I2C | /*I2C_FUNC_10BIT_ADDR |*/ I2C_FUNC_SMBUS_EMUL;
++}
++
++static struct i2c_algorithm bcm2708_i2c_algorithm = {
++	.master_xfer = bcm2708_i2c_master_xfer,
++	.functionality = bcm2708_i2c_functionality,
++};
++
++static int bcm2708_i2c_probe(struct platform_device *pdev)
++{
++	struct resource *regs;
++	int irq, err = -ENOMEM;
++	struct clk *clk;
++	struct bcm2708_i2c *bi;
++	struct i2c_adapter *adap;
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs) {
++		dev_err(&pdev->dev, "could not get IO memory\n");
++		return -ENXIO;
++	}
++
++	irq = platform_get_irq(pdev, 0);
++	if (irq < 0) {
++		dev_err(&pdev->dev, "could not get IRQ\n");
++		return irq;
++	}
++
++	clk = clk_get(&pdev->dev, NULL);
++	if (IS_ERR(clk)) {
++		dev_err(&pdev->dev, "could not find clk: %ld\n", PTR_ERR(clk));
++		return PTR_ERR(clk);
++	}
++
++	bcm2708_i2c_init_pinmode(pdev->id);
++
++	bi = kzalloc(sizeof(*bi), GFP_KERNEL);
++	if (!bi)
++		goto out_clk_put;
++
++	platform_set_drvdata(pdev, bi);
++
++	adap = &bi->adapter;
++	adap->class = I2C_CLASS_HWMON | I2C_CLASS_DDC;
++	adap->algo = &bcm2708_i2c_algorithm;
++	adap->algo_data = bi;
++	adap->dev.parent = &pdev->dev;
++	adap->nr = pdev->id;
++	strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name));
++
++	switch (pdev->id) {
++	case 0:
++		adap->class = I2C_CLASS_HWMON;
++		break;
++	case 1:
++		adap->class = I2C_CLASS_DDC;
++		break;
++	default:
++		dev_err(&pdev->dev, "can only bind to BSC 0 or 1\n");
++		err = -ENXIO;
++		goto out_free_bi;
++	}
++
++	spin_lock_init(&bi->lock);
++	init_completion(&bi->done);
++
++	bi->base = ioremap(regs->start, resource_size(regs));
++	if (!bi->base) {
++		dev_err(&pdev->dev, "could not remap memory\n");
++		goto out_free_bi;
++	}
++
++	bi->irq = irq;
++	bi->clk = clk;
++
++	err = request_irq(irq, bcm2708_i2c_interrupt, IRQF_SHARED,
++			dev_name(&pdev->dev), bi);
++	if (err) {
++		dev_err(&pdev->dev, "could not request IRQ: %d\n", err);
++		goto out_iounmap;
++	}
++
++	bcm2708_bsc_reset(bi);
++
++	err = i2c_add_numbered_adapter(adap);
++	if (err < 0) {
++		dev_err(&pdev->dev, "could not add I2C adapter: %d\n", err);
++		goto out_free_irq;
++	}
++
++	dev_info(&pdev->dev, "BSC%d Controller at 0x%08lx (irq %d) (baudrate %dk)\n",
++		pdev->id, (unsigned long)regs->start, irq, baudrate/1000);
++
++	return 0;
++
++out_free_irq:
++	free_irq(bi->irq, bi);
++out_iounmap:
++	iounmap(bi->base);
++out_free_bi:
++	kfree(bi);
++out_clk_put:
++	clk_put(clk);
++	return err;
++}
++
++static int bcm2708_i2c_remove(struct platform_device *pdev)
++{
++	struct bcm2708_i2c *bi = platform_get_drvdata(pdev);
++
++	platform_set_drvdata(pdev, NULL);
++
++	i2c_del_adapter(&bi->adapter);
++	free_irq(bi->irq, bi);
++	iounmap(bi->base);
++	clk_disable(bi->clk);
++	clk_put(bi->clk);
++	kfree(bi);
++
++	return 0;
++}
++
++static struct platform_driver bcm2708_i2c_driver = {
++	.driver		= {
++		.name	= DRV_NAME,
++		.owner	= THIS_MODULE,
++	},
++	.probe		= bcm2708_i2c_probe,
++	.remove		= bcm2708_i2c_remove,
++};
++
++// module_platform_driver(bcm2708_i2c_driver);
++
++
++static int __init bcm2708_i2c_init(void)
++{
++	return platform_driver_register(&bcm2708_i2c_driver);
++}
++
++static void __exit bcm2708_i2c_exit(void)
++{
++	platform_driver_unregister(&bcm2708_i2c_driver);
++}
++
++module_init(bcm2708_i2c_init);
++module_exit(bcm2708_i2c_exit);
++
++
++
++MODULE_DESCRIPTION("BSC controller driver for Broadcom BCM2708");
++MODULE_AUTHOR("Chris Boot <bootc@bootc.net>");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:" DRV_NAME);
+diff -Nur linux-3.12.6/drivers/i2c/busses/Kconfig linux-raspberry-pi/drivers/i2c/busses/Kconfig
+--- linux-3.12.6/drivers/i2c/busses/Kconfig	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/i2c/busses/Kconfig	2013-12-29 10:40:39.000000000 +0100
+@@ -345,6 +345,25 @@
+ 	  This support is also available as a module.  If so, the module
+ 	  will be called i2c-bcm2835.
+ 
++config I2C_BCM2708
++	tristate "BCM2708 BSC"
++	depends on MACH_BCM2708
++	help
++	  Enabling this option will add BSC (Broadcom Serial Controller)
++	  support for the BCM2708. BSC is a Broadcom proprietary bus compatible
++	  with I2C/TWI/SMBus.
++
++config I2C_BCM2708_BAUDRATE
++    prompt "BCM2708 I2C baudrate"
++	depends on I2C_BCM2708
++    int
++    default 100000
++    help
++      Set the I2C baudrate. This will alter the default value. A
++      different baudrate can be set by using a module parameter as well. If
++      no parameter is provided when loading, this is the value that will be
++      used.
++
+ config I2C_BLACKFIN_TWI
+ 	tristate "Blackfin TWI I2C support"
+ 	depends on BLACKFIN
+diff -Nur linux-3.12.6/drivers/i2c/busses/Makefile linux-raspberry-pi/drivers/i2c/busses/Makefile
+--- linux-3.12.6/drivers/i2c/busses/Makefile	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/i2c/busses/Makefile	2013-12-29 10:40:39.000000000 +0100
+@@ -32,6 +32,7 @@
+ obj-$(CONFIG_I2C_AT91)		+= i2c-at91.o
+ obj-$(CONFIG_I2C_AU1550)	+= i2c-au1550.o
+ obj-$(CONFIG_I2C_BCM2835)	+= i2c-bcm2835.o
++obj-$(CONFIG_I2C_BCM2708)	+= i2c-bcm2708.o
+ obj-$(CONFIG_I2C_BLACKFIN_TWI)	+= i2c-bfin-twi.o
+ obj-$(CONFIG_I2C_CBUS_GPIO)	+= i2c-cbus-gpio.o
+ obj-$(CONFIG_I2C_CPM)		+= i2c-cpm.o
+diff -Nur linux-3.12.6/drivers/media/dvb-core/dvb-usb-ids.h linux-raspberry-pi/drivers/media/dvb-core/dvb-usb-ids.h
+--- linux-3.12.6/drivers/media/dvb-core/dvb-usb-ids.h	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/media/dvb-core/dvb-usb-ids.h	2013-12-29 10:40:40.000000000 +0100
+@@ -365,6 +365,7 @@
+ #define USB_PID_TERRATEC_DVBS2CI_V2			0x10ac
+ #define USB_PID_TECHNISAT_USB2_HDCI_V1			0x0001
+ #define USB_PID_TECHNISAT_USB2_HDCI_V2			0x0002
++#define USB_PID_TECHNISAT_USB2_CABLESTAR_HDCI		0x0003
+ #define USB_PID_TECHNISAT_AIRSTAR_TELESTICK_2		0x0004
+ #define USB_PID_TECHNISAT_USB2_DVB_S2			0x0500
+ #define USB_PID_CPYTO_REDI_PC50A			0xa803
+diff -Nur linux-3.12.6/drivers/media/platform/bcm2835/bcm2835-camera.c linux-raspberry-pi/drivers/media/platform/bcm2835/bcm2835-camera.c
+--- linux-3.12.6/drivers/media/platform/bcm2835/bcm2835-camera.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/media/platform/bcm2835/bcm2835-camera.c	2013-12-29 10:40:41.000000000 +0100
+@@ -0,0 +1,1622 @@
++/*
++ * Broadcom BM2835 V4L2 driver
++ *
++ * Copyright © 2013 Raspberry Pi (Trading) Ltd.
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file COPYING in the main directory of this archive
++ * for more details.
++ *
++ * Authors: Vincent Sanders <vincent.sanders@collabora.co.uk>
++ *          Dave Stevenson <dsteve@broadcom.com>
++ *          Simon Mellor <simellor@broadcom.com>
++ *          Luke Diamand <luked@broadcom.com>
++ */
++
++#include <linux/errno.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <media/videobuf2-vmalloc.h>
++#include <media/videobuf2-dma-contig.h>
++#include <media/v4l2-device.h>
++#include <media/v4l2-ioctl.h>
++#include <media/v4l2-ctrls.h>
++#include <media/v4l2-fh.h>
++#include <media/v4l2-event.h>
++#include <media/v4l2-common.h>
++#include <linux/delay.h>
++
++#include "mmal-common.h"
++#include "mmal-encodings.h"
++#include "mmal-vchiq.h"
++#include "mmal-msg.h"
++#include "mmal-parameters.h"
++#include "bcm2835-camera.h"
++
++#define BM2835_MMAL_VERSION "0.0.2"
++#define BM2835_MMAL_MODULE_NAME "bcm2835-v4l2"
++
++#define MAX_WIDTH 2592
++#define MAX_HEIGHT 1944
++#define MIN_BUFFER_SIZE (80*1024)
++
++#define MAX_VIDEO_MODE_WIDTH 1280
++#define MAX_VIDEO_MODE_HEIGHT 720
++
++MODULE_DESCRIPTION("Broadcom 2835 MMAL video capture");
++MODULE_AUTHOR("Vincent Sanders");
++MODULE_LICENSE("GPL");
++MODULE_VERSION(BM2835_MMAL_VERSION);
++
++int bcm2835_v4l2_debug;
++module_param_named(debug, bcm2835_v4l2_debug, int, 0644);
++MODULE_PARM_DESC(bcm2835_v4l2_debug, "Debug level 0-2");
++
++static struct bm2835_mmal_dev *gdev;	/* global device data */
++
++#define FPS_MIN 1
++#define FPS_MAX 30
++
++/* timeperframe: min/max and default */
++static const struct v4l2_fract
++	tpf_min     = {.numerator = 1,		.denominator = FPS_MAX},
++	tpf_max     = {.numerator = 1,	        .denominator = FPS_MIN},
++	tpf_default = {.numerator = 1000,	.denominator = 30000};
++
++/* video formats */
++static struct mmal_fmt formats[] = {
++	{
++	 .name = "4:2:0, packed YUV",
++	 .fourcc = V4L2_PIX_FMT_YUV420,
++	 .mmal = MMAL_ENCODING_I420,
++	 .depth = 12,
++	 .mmal_component = MMAL_COMPONENT_CAMERA,
++	 },
++	{
++	 .name = "4:2:2, packed, YUYV",
++	 .fourcc = V4L2_PIX_FMT_YUYV,
++	 .mmal = MMAL_ENCODING_YUYV,
++	 .depth = 16,
++	 .mmal_component = MMAL_COMPONENT_CAMERA,
++	 },
++	{
++	 .name = "RGB24 (BE)",
++	 .fourcc = V4L2_PIX_FMT_BGR24,
++	 .mmal = MMAL_ENCODING_BGR24,
++	 .depth = 24,
++	 .mmal_component = MMAL_COMPONENT_CAMERA,
++	 },
++	{
++	 .name = "JPEG",
++	 .fourcc = V4L2_PIX_FMT_JPEG,
++	 .mmal = MMAL_ENCODING_JPEG,
++	 .depth = 8,
++	 .mmal_component = MMAL_COMPONENT_IMAGE_ENCODE,
++	 },
++	{
++	 .name = "H264",
++	 .fourcc = V4L2_PIX_FMT_H264,
++	 .mmal = MMAL_ENCODING_H264,
++	 .depth = 8,
++	 .mmal_component = MMAL_COMPONENT_VIDEO_ENCODE,
++	 }
++};
++
++static struct mmal_fmt *get_format(struct v4l2_format *f)
++{
++	struct mmal_fmt *fmt;
++	unsigned int k;
++
++	for (k = 0; k < ARRAY_SIZE(formats); k++) {
++		fmt = &formats[k];
++		if (fmt->fourcc == f->fmt.pix.pixelformat)
++			break;
++	}
++
++	if (k == ARRAY_SIZE(formats))
++		return NULL;
++
++	return &formats[k];
++}
++
++/* ------------------------------------------------------------------
++	Videobuf queue operations
++   ------------------------------------------------------------------*/
++
++static int queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt,
++		       unsigned int *nbuffers, unsigned int *nplanes,
++		       unsigned int sizes[], void *alloc_ctxs[])
++{
++	struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vq);
++	unsigned long size;
++
++	/* refuse queue setup if port is not configured */
++	if (dev->capture.port == NULL) {
++		v4l2_err(&dev->v4l2_dev,
++			 "%s: capture port not configured\n", __func__);
++		return -EINVAL;
++	}
++
++	size = dev->capture.port->current_buffer.size;
++	if (size == 0) {
++		v4l2_err(&dev->v4l2_dev,
++			 "%s: capture port buffer size is zero\n", __func__);
++		return -EINVAL;
++	}
++
++	if (*nbuffers < (dev->capture.port->current_buffer.num + 2))
++		*nbuffers = (dev->capture.port->current_buffer.num + 2);
++
++	*nplanes = 1;
++
++	sizes[0] = size;
++
++	/*
++	 * videobuf2-vmalloc allocator is context-less so no need to set
++	 * alloc_ctxs array.
++	 */
++
++	v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "%s: dev:%p\n",
++		 __func__, dev);
++
++	return 0;
++}
++
++static int buffer_prepare(struct vb2_buffer *vb)
++{
++	struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
++	unsigned long size;
++
++	v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "%s: dev:%p\n",
++		 __func__, dev);
++
++	BUG_ON(dev->capture.port == NULL);
++	BUG_ON(dev->capture.fmt == NULL);
++
++	size = dev->capture.stride * dev->capture.height;
++	if (vb2_plane_size(vb, 0) < size) {
++		v4l2_err(&dev->v4l2_dev,
++			 "%s data will not fit into plane (%lu < %lu)\n",
++			 __func__, vb2_plane_size(vb, 0), size);
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++static inline bool is_capturing(struct bm2835_mmal_dev *dev)
++{
++	return dev->capture.camera_port ==
++	    &dev->
++	    component[MMAL_COMPONENT_CAMERA]->output[MMAL_CAMERA_PORT_CAPTURE];
++}
++
++static void buffer_cb(struct vchiq_mmal_instance *instance,
++		      struct vchiq_mmal_port *port,
++		      int status,
++		      struct mmal_buffer *buf,
++		      unsigned long length, u32 mmal_flags, s64 dts, s64 pts)
++{
++	struct bm2835_mmal_dev *dev = port->cb_ctx;
++
++	v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
++		 "%s: status:%d, buf:%p, length:%lu, flags %u, pts %lld\n",
++		 __func__, status, buf, length, mmal_flags, pts);
++
++	if (status != 0) {
++		/* error in transfer */
++		if (buf != NULL) {
++			/* there was a buffer with the error so return it */
++			vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
++		}
++		return;
++	} else if (length == 0) {
++		/* stream ended */
++		if (buf != NULL) {
++			/* this should only ever happen if the port is
++			 * disabled and there are buffers still queued
++			 */
++			vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
++			pr_debug("Empty buffer");
++		} else if (dev->capture.frame_count) {
++			/* grab another frame */
++			if (is_capturing(dev)) {
++				pr_debug("Grab another frame");
++				vchiq_mmal_port_parameter_set(
++					instance,
++					dev->capture.
++					camera_port,
++					MMAL_PARAMETER_CAPTURE,
++					&dev->capture.
++					frame_count,
++					sizeof(dev->capture.frame_count));
++			}
++		} else {
++			/* signal frame completion */
++			complete(&dev->capture.frame_cmplt);
++		}
++	} else {
++		if (dev->capture.frame_count) {
++			if (dev->capture.vc_start_timestamp != -1 &&
++			    pts != 0) {
++				s64 runtime_us = pts -
++				    dev->capture.vc_start_timestamp;
++				u32 div = 0;
++				u32 rem = 0;
++
++				div =
++				    div_u64_rem(runtime_us, USEC_PER_SEC, &rem);
++				buf->vb.v4l2_buf.timestamp.tv_sec =
++				    dev->capture.kernel_start_ts.tv_sec - 1 +
++				    div;
++				buf->vb.v4l2_buf.timestamp.tv_usec =
++				    dev->capture.kernel_start_ts.tv_usec + rem;
++
++				if (buf->vb.v4l2_buf.timestamp.tv_usec >=
++				    USEC_PER_SEC) {
++					buf->vb.v4l2_buf.timestamp.tv_sec++;
++					buf->vb.v4l2_buf.timestamp.tv_usec -=
++					    USEC_PER_SEC;
++				}
++				v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
++					 "Convert start time %d.%06d and %llu "
++					 "with offset %llu to %d.%06d\n",
++					 (int)dev->capture.kernel_start_ts.
++					 tv_sec,
++					 (int)dev->capture.kernel_start_ts.
++					 tv_usec,
++					 dev->capture.vc_start_timestamp, pts,
++					 (int)buf->vb.v4l2_buf.timestamp.tv_sec,
++					 (int)buf->vb.v4l2_buf.timestamp.
++					 tv_usec);
++			} else {
++				v4l2_get_timestamp(&buf->vb.v4l2_buf.timestamp);
++			}
++
++			vb2_set_plane_payload(&buf->vb, 0, length);
++			vb2_buffer_done(&buf->vb, VB2_BUF_STATE_DONE);
++
++			if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_EOS &&
++			    is_capturing(dev)) {
++				v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
++					 "Grab another frame as buffer has EOS");
++				vchiq_mmal_port_parameter_set(
++					instance,
++					dev->capture.
++					camera_port,
++					MMAL_PARAMETER_CAPTURE,
++					&dev->capture.
++					frame_count,
++					sizeof(dev->capture.frame_count));
++			}
++		} else {
++			/* signal frame completion */
++			complete(&dev->capture.frame_cmplt);
++		}
++	}
++}
++
++static int enable_camera(struct bm2835_mmal_dev *dev)
++{
++	int ret;
++	if (!dev->camera_use_count) {
++		ret = vchiq_mmal_component_enable(
++				dev->instance,
++				dev->component[MMAL_COMPONENT_CAMERA]);
++		if (ret < 0) {
++			v4l2_err(&dev->v4l2_dev,
++				 "Failed enabling camera, ret %d\n", ret);
++			return -EINVAL;
++		}
++	}
++	dev->camera_use_count++;
++	v4l2_dbg(1, bcm2835_v4l2_debug,
++		 &dev->v4l2_dev, "enabled camera (refcount %d)\n",
++			dev->camera_use_count);
++	return 0;
++}
++
++static int disable_camera(struct bm2835_mmal_dev *dev)
++{
++	int ret;
++	if (!dev->camera_use_count) {
++		v4l2_err(&dev->v4l2_dev,
++			 "Disabled the camera when already disabled\n");
++		return -EINVAL;
++	}
++	dev->camera_use_count--;
++	if (!dev->camera_use_count) {
++		unsigned int i = 0xFFFFFFFF;
++		v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
++			 "Disabling camera\n");
++		ret =
++		    vchiq_mmal_component_disable(
++				dev->instance,
++				dev->component[MMAL_COMPONENT_CAMERA]);
++		if (ret < 0) {
++			v4l2_err(&dev->v4l2_dev,
++				 "Failed disabling camera, ret %d\n", ret);
++			return -EINVAL;
++		}
++		vchiq_mmal_port_parameter_set(
++			dev->instance,
++			&dev->component[MMAL_COMPONENT_CAMERA]->control,
++			MMAL_PARAMETER_CAMERA_NUM, &i,
++			sizeof(i));
++	}
++	v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
++		 "Camera refcount now %d\n", dev->camera_use_count);
++	return 0;
++}
++
++static void buffer_queue(struct vb2_buffer *vb)
++{
++	struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
++	struct mmal_buffer *buf = container_of(vb, struct mmal_buffer, vb);
++	int ret;
++
++	v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
++		 "%s: dev:%p buf:%p\n", __func__, dev, buf);
++
++	buf->buffer = vb2_plane_vaddr(&buf->vb, 0);
++	buf->buffer_size = vb2_plane_size(&buf->vb, 0);
++
++	ret = vchiq_mmal_submit_buffer(dev->instance, dev->capture.port, buf);
++	if (ret < 0)
++		v4l2_err(&dev->v4l2_dev, "%s: error submitting buffer\n",
++			 __func__);
++}
++
++static int start_streaming(struct vb2_queue *vq, unsigned int count)
++{
++	struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vq);
++	int ret;
++	int parameter_size;
++
++	v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "%s: dev:%p\n",
++		 __func__, dev);
++
++	/* ensure a format has actually been set */
++	if (dev->capture.port == NULL)
++		return -EINVAL;
++
++	if (enable_camera(dev) < 0) {
++		v4l2_err(&dev->v4l2_dev, "Failed to enable camera\n");
++		return -EINVAL;
++	}
++
++	/*init_completion(&dev->capture.frame_cmplt); */
++
++	/* enable frame capture */
++	dev->capture.frame_count = 1;
++
++	/* if the preview is not already running, wait for a few frames for AGC
++	 * to settle down.
++	 */
++	if (!dev->component[MMAL_COMPONENT_PREVIEW]->enabled)
++		msleep(300);
++
++	/* enable the connection from camera to encoder (if applicable) */
++	if (dev->capture.camera_port != dev->capture.port
++	    && dev->capture.camera_port) {
++		ret = vchiq_mmal_port_enable(dev->instance,
++					     dev->capture.camera_port, NULL);
++		if (ret) {
++			v4l2_err(&dev->v4l2_dev,
++				 "Failed to enable encode tunnel - error %d\n",
++				 ret);
++			return -1;
++		}
++	}
++
++	/* Get VC timestamp at this point in time */
++	parameter_size = sizeof(dev->capture.vc_start_timestamp);
++	if (vchiq_mmal_port_parameter_get(dev->instance,
++					  dev->capture.camera_port,
++					  MMAL_PARAMETER_SYSTEM_TIME,
++					  &dev->capture.vc_start_timestamp,
++					  &parameter_size)) {
++		v4l2_err(&dev->v4l2_dev,
++			 "Failed to get VC start time - update your VC f/w\n");
++
++		/* Flag to indicate just to rely on kernel timestamps */
++		dev->capture.vc_start_timestamp = -1;
++	} else
++		v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
++			 "Start time %lld size %d\n",
++			 dev->capture.vc_start_timestamp, parameter_size);
++
++	v4l2_get_timestamp(&dev->capture.kernel_start_ts);
++
++	/* enable the camera port */
++	dev->capture.port->cb_ctx = dev;
++	ret =
++	    vchiq_mmal_port_enable(dev->instance, dev->capture.port, buffer_cb);
++	if (ret) {
++		v4l2_err(&dev->v4l2_dev,
++			"Failed to enable capture port - error %d. "
++			"Disabling camera port again\n", ret);
++
++		vchiq_mmal_port_disable(dev->instance,
++					dev->capture.camera_port);
++		if (disable_camera(dev) < 0) {
++			v4l2_err(&dev->v4l2_dev, "Failed to disable camera");
++			return -EINVAL;
++		}
++		return -1;
++	}
++
++	/* capture the first frame */
++	vchiq_mmal_port_parameter_set(dev->instance,
++				      dev->capture.camera_port,
++				      MMAL_PARAMETER_CAPTURE,
++				      &dev->capture.frame_count,
++				      sizeof(dev->capture.frame_count));
++	return 0;
++}
++
++/* abort streaming and wait for last buffer */
++static int stop_streaming(struct vb2_queue *vq)
++{
++	int ret;
++	struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vq);
++
++	v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "%s: dev:%p\n",
++		 __func__, dev);
++
++	init_completion(&dev->capture.frame_cmplt);
++	dev->capture.frame_count = 0;
++
++	/* ensure a format has actually been set */
++	if (dev->capture.port == NULL)
++		return -EINVAL;
++
++	v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "stopping capturing\n");
++
++	/* stop capturing frames */
++	vchiq_mmal_port_parameter_set(dev->instance,
++				      dev->capture.camera_port,
++				      MMAL_PARAMETER_CAPTURE,
++				      &dev->capture.frame_count,
++				      sizeof(dev->capture.frame_count));
++
++	/* wait for last frame to complete */
++	ret = wait_for_completion_timeout(&dev->capture.frame_cmplt, HZ);
++	if (ret <= 0)
++		v4l2_err(&dev->v4l2_dev,
++			 "error %d waiting for frame completion\n", ret);
++
++	v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
++		 "disabling connection\n");
++
++	/* disable the connection from camera to encoder */
++	ret = vchiq_mmal_port_disable(dev->instance, dev->capture.camera_port);
++	if (!ret && dev->capture.camera_port != dev->capture.port) {
++		v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
++			 "disabling port\n");
++		ret = vchiq_mmal_port_disable(dev->instance, dev->capture.port);
++	} else if (dev->capture.camera_port != dev->capture.port) {
++		v4l2_err(&dev->v4l2_dev, "port_disable failed, error %d\n",
++			 ret);
++	}
++
++	if (disable_camera(dev) < 0) {
++		v4l2_err(&dev->v4l2_dev, "Failed to disable camera");
++		return -EINVAL;
++	}
++
++	return ret;
++}
++
++static void bm2835_mmal_lock(struct vb2_queue *vq)
++{
++	struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vq);
++	mutex_lock(&dev->mutex);
++}
++
++static void bm2835_mmal_unlock(struct vb2_queue *vq)
++{
++	struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vq);
++	mutex_unlock(&dev->mutex);
++}
++
++static struct vb2_ops bm2835_mmal_video_qops = {
++	.queue_setup = queue_setup,
++	.buf_prepare = buffer_prepare,
++	.buf_queue = buffer_queue,
++	.start_streaming = start_streaming,
++	.stop_streaming = stop_streaming,
++	.wait_prepare = bm2835_mmal_unlock,
++	.wait_finish = bm2835_mmal_lock,
++};
++
++/* ------------------------------------------------------------------
++	IOCTL operations
++   ------------------------------------------------------------------*/
++
++/* overlay ioctl */
++static int vidioc_enum_fmt_vid_overlay(struct file *file, void *priv,
++				       struct v4l2_fmtdesc *f)
++{
++	struct mmal_fmt *fmt;
++
++	if (f->index >= ARRAY_SIZE(formats))
++		return -EINVAL;
++
++	fmt = &formats[f->index];
++
++	strlcpy(f->description, fmt->name, sizeof(f->description));
++	f->pixelformat = fmt->fourcc;
++
++	return 0;
++}
++
++static int vidioc_g_fmt_vid_overlay(struct file *file, void *priv,
++				    struct v4l2_format *f)
++{
++	struct bm2835_mmal_dev *dev = video_drvdata(file);
++
++	f->fmt.win = dev->overlay;
++
++	return 0;
++}
++
++static int vidioc_try_fmt_vid_overlay(struct file *file, void *priv,
++				      struct v4l2_format *f)
++{
++	/* Only support one format so get the current one. */
++	vidioc_g_fmt_vid_overlay(file, priv, f);
++
++	/* todo: allow the size and/or offset to be changed. */
++	return 0;
++}
++
++static int vidioc_s_fmt_vid_overlay(struct file *file, void *priv,
++				    struct v4l2_format *f)
++{
++	struct bm2835_mmal_dev *dev = video_drvdata(file);
++
++	vidioc_try_fmt_vid_overlay(file, priv, f);
++
++	dev->overlay = f->fmt.win;
++
++	/* todo: program the preview port parameters */
++	return 0;
++}
++
++static int vidioc_overlay(struct file *file, void *f, unsigned int on)
++{
++	int ret;
++	struct bm2835_mmal_dev *dev = video_drvdata(file);
++	struct vchiq_mmal_port *src;
++	struct vchiq_mmal_port *dst;
++	struct mmal_parameter_displayregion prev_config = {
++		.set = MMAL_DISPLAY_SET_LAYER | MMAL_DISPLAY_SET_ALPHA |
++		    MMAL_DISPLAY_SET_DEST_RECT | MMAL_DISPLAY_SET_FULLSCREEN,
++		.layer = PREVIEW_LAYER,
++		.alpha = 255,
++		.fullscreen = 0,
++		.dest_rect = {
++			      .x = dev->overlay.w.left,
++			      .y = dev->overlay.w.top,
++			      .width = dev->overlay.w.width,
++			      .height = dev->overlay.w.height,
++			      },
++	};
++
++	if ((on && dev->component[MMAL_COMPONENT_PREVIEW]->enabled) ||
++	    (!on && !dev->component[MMAL_COMPONENT_PREVIEW]->enabled))
++		return 0;	/* already in requested state */
++
++	src =
++	    &dev->component[MMAL_COMPONENT_CAMERA]->
++	    output[MMAL_CAMERA_PORT_PREVIEW];
++
++	if (!on) {
++		/* disconnect preview ports and disable component */
++		ret = vchiq_mmal_port_disable(dev->instance, src);
++		if (!ret)
++			ret =
++			    vchiq_mmal_port_connect_tunnel(dev->instance, src,
++							   NULL);
++		if (ret >= 0)
++			ret = vchiq_mmal_component_disable(
++					dev->instance,
++					dev->component[MMAL_COMPONENT_PREVIEW]);
++
++		disable_camera(dev);
++		return ret;
++	}
++
++	/* set preview port format and connect it to output */
++	dst = &dev->component[MMAL_COMPONENT_PREVIEW]->input[0];
++
++	ret = vchiq_mmal_port_set_format(dev->instance, src);
++	if (ret < 0)
++		goto error;
++
++	ret = vchiq_mmal_port_parameter_set(dev->instance, dst,
++					    MMAL_PARAMETER_DISPLAYREGION,
++					    &prev_config, sizeof(prev_config));
++	if (ret < 0)
++		goto error;
++
++	if (enable_camera(dev) < 0)
++		goto error;
++
++	ret = vchiq_mmal_component_enable(
++			dev->instance,
++			dev->component[MMAL_COMPONENT_PREVIEW]);
++	if (ret < 0)
++		goto error;
++
++	v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "connecting %p to %p\n",
++		 src, dst);
++	ret = vchiq_mmal_port_connect_tunnel(dev->instance, src, dst);
++	if (!ret)
++		ret = vchiq_mmal_port_enable(dev->instance, src, NULL);
++error:
++	return ret;
++}
++
++static int vidioc_g_fbuf(struct file *file, void *fh,
++			 struct v4l2_framebuffer *a)
++{
++	/* The video overlay must stay within the framebuffer and can't be
++	   positioned independently. */
++	struct bm2835_mmal_dev *dev = video_drvdata(file);
++	struct vchiq_mmal_port *preview_port =
++		    &dev->component[MMAL_COMPONENT_CAMERA]->
++		    output[MMAL_CAMERA_PORT_PREVIEW];
++	a->flags = V4L2_FBUF_FLAG_OVERLAY;
++	a->fmt.width = preview_port->es.video.width;
++	a->fmt.height = preview_port->es.video.height;
++	a->fmt.pixelformat = V4L2_PIX_FMT_YUV420;
++	a->fmt.bytesperline = (preview_port->es.video.width * 3)>>1;
++	a->fmt.sizeimage = (preview_port->es.video.width *
++			       preview_port->es.video.height * 3)>>1;
++	a->fmt.colorspace = V4L2_COLORSPACE_SMPTE170M;
++
++	return 0;
++}
++
++/* input ioctls */
++static int vidioc_enum_input(struct file *file, void *priv,
++			     struct v4l2_input *inp)
++{
++	/* only a single camera input */
++	if (inp->index != 0)
++		return -EINVAL;
++
++	inp->type = V4L2_INPUT_TYPE_CAMERA;
++	sprintf(inp->name, "Camera %u", inp->index);
++	return 0;
++}
++
++static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
++{
++	*i = 0;
++	return 0;
++}
++
++static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
++{
++	if (i != 0)
++		return -EINVAL;
++
++	return 0;
++}
++
++/* capture ioctls */
++static int vidioc_querycap(struct file *file, void *priv,
++			   struct v4l2_capability *cap)
++{
++	struct bm2835_mmal_dev *dev = video_drvdata(file);
++	u32 major;
++	u32 minor;
++
++	vchiq_mmal_version(dev->instance, &major, &minor);
++
++	strcpy(cap->driver, "bm2835 mmal");
++	snprintf(cap->card, sizeof(cap->card), "mmal service %d.%d",
++		 major, minor);
++
++	snprintf(cap->bus_info, sizeof(cap->bus_info),
++		 "platform:%s", dev->v4l2_dev.name);
++	cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OVERLAY |
++	    V4L2_CAP_STREAMING | V4L2_CAP_READWRITE;
++	cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
++
++	return 0;
++}
++
++static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv,
++				   struct v4l2_fmtdesc *f)
++{
++	struct mmal_fmt *fmt;
++
++	if (f->index >= ARRAY_SIZE(formats))
++		return -EINVAL;
++
++	fmt = &formats[f->index];
++
++	strlcpy(f->description, fmt->name, sizeof(f->description));
++	f->pixelformat = fmt->fourcc;
++	return 0;
++}
++
++static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
++				struct v4l2_format *f)
++{
++	struct bm2835_mmal_dev *dev = video_drvdata(file);
++
++	f->fmt.pix.width = dev->capture.width;
++	f->fmt.pix.height = dev->capture.height;
++	f->fmt.pix.field = V4L2_FIELD_NONE;
++	f->fmt.pix.pixelformat = dev->capture.fmt->fourcc;
++	f->fmt.pix.bytesperline =
++	    (f->fmt.pix.width * dev->capture.fmt->depth) >> 3;
++	f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline;
++	if (dev->capture.fmt->fourcc == V4L2_PIX_FMT_JPEG
++	    && f->fmt.pix.sizeimage < (100 << 10)) {
++		/* Need a minimum size for JPEG to account for EXIF. */
++		f->fmt.pix.sizeimage = (100 << 10);
++	}
++
++	if (dev->capture.fmt->fourcc == V4L2_PIX_FMT_YUYV ||
++	    dev->capture.fmt->fourcc == V4L2_PIX_FMT_UYVY)
++		f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
++	else
++		f->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB;
++	f->fmt.pix.priv = 0;
++
++	v4l2_dump_pix_format(1, bcm2835_v4l2_debug, &dev->v4l2_dev, &f->fmt.pix,
++			     __func__);
++	return 0;
++}
++
++static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
++				  struct v4l2_format *f)
++{
++	struct bm2835_mmal_dev *dev = video_drvdata(file);
++	struct mmal_fmt *mfmt;
++
++	mfmt = get_format(f);
++	if (!mfmt) {
++		v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
++			 "Fourcc format (0x%08x) unknown.\n",
++			 f->fmt.pix.pixelformat);
++		f->fmt.pix.pixelformat = formats[0].fourcc;
++		mfmt = get_format(f);
++	}
++
++	f->fmt.pix.field = V4L2_FIELD_NONE;
++	/* image must be a multiple of 32 pixels wide and 16 lines high */
++	v4l_bound_align_image(&f->fmt.pix.width, 48, MAX_WIDTH, 5,
++			      &f->fmt.pix.height, 32, MAX_HEIGHT, 4, 0);
++	f->fmt.pix.bytesperline = (f->fmt.pix.width * mfmt->depth) >> 3;
++	f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline;
++	if (f->fmt.pix.sizeimage < MIN_BUFFER_SIZE)
++		f->fmt.pix.sizeimage = MIN_BUFFER_SIZE;
++
++	if (mfmt->fourcc == V4L2_PIX_FMT_YUYV ||
++	    mfmt->fourcc == V4L2_PIX_FMT_UYVY)
++		f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
++	else
++		f->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB;
++	f->fmt.pix.priv = 0;
++
++	v4l2_dump_pix_format(1, bcm2835_v4l2_debug, &dev->v4l2_dev, &f->fmt.pix,
++			     __func__);
++	return 0;
++}
++
++static int mmal_setup_components(struct bm2835_mmal_dev *dev,
++				 struct v4l2_format *f)
++{
++	int ret;
++	struct vchiq_mmal_port *port = NULL, *camera_port = NULL;
++	struct vchiq_mmal_component *encode_component = NULL;
++	struct mmal_fmt *mfmt = get_format(f);
++
++	BUG_ON(!mfmt);
++
++	if (dev->capture.encode_component) {
++		v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
++			 "vid_cap - disconnect previous tunnel\n");
++
++		/* Disconnect any previous connection */
++		vchiq_mmal_port_connect_tunnel(dev->instance,
++					       dev->capture.camera_port, NULL);
++		dev->capture.camera_port = NULL;
++		ret = vchiq_mmal_component_disable(dev->instance,
++						   dev->capture.
++						   encode_component);
++		if (ret)
++			v4l2_err(&dev->v4l2_dev,
++				 "Failed to disable encode component %d\n",
++				 ret);
++
++		dev->capture.encode_component = NULL;
++	}
++	/* format dependant port setup */
++	switch (mfmt->mmal_component) {
++	case MMAL_COMPONENT_CAMERA:
++		/* Make a further decision on port based on resolution */
++		if (f->fmt.pix.width <= MAX_VIDEO_MODE_WIDTH
++		    && f->fmt.pix.height <= MAX_VIDEO_MODE_HEIGHT)
++			camera_port = port =
++			    &dev->component[MMAL_COMPONENT_CAMERA]->
++			    output[MMAL_CAMERA_PORT_VIDEO];
++		else
++			camera_port = port =
++			    &dev->component[MMAL_COMPONENT_CAMERA]->
++			    output[MMAL_CAMERA_PORT_CAPTURE];
++		break;
++	case MMAL_COMPONENT_IMAGE_ENCODE:
++		encode_component = dev->component[MMAL_COMPONENT_IMAGE_ENCODE];
++		port = &dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->output[0];
++		camera_port =
++		    &dev->component[MMAL_COMPONENT_CAMERA]->
++		    output[MMAL_CAMERA_PORT_CAPTURE];
++		break;
++	case MMAL_COMPONENT_VIDEO_ENCODE:
++		encode_component = dev->component[MMAL_COMPONENT_VIDEO_ENCODE];
++		port = &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0];
++		camera_port =
++		    &dev->component[MMAL_COMPONENT_CAMERA]->
++		    output[MMAL_CAMERA_PORT_VIDEO];
++		break;
++	default:
++		break;
++	}
++
++	if (!port)
++		return -EINVAL;
++
++	if (encode_component)
++		camera_port->format.encoding = MMAL_ENCODING_OPAQUE;
++	else
++		camera_port->format.encoding = mfmt->mmal;
++
++	camera_port->format.encoding_variant = 0;
++	camera_port->es.video.width = f->fmt.pix.width;
++	camera_port->es.video.height = f->fmt.pix.height;
++	camera_port->es.video.crop.x = 0;
++	camera_port->es.video.crop.y = 0;
++	camera_port->es.video.crop.width = f->fmt.pix.width;
++	camera_port->es.video.crop.height = f->fmt.pix.height;
++	camera_port->es.video.frame_rate.num =
++			dev->capture.timeperframe.denominator;
++	camera_port->es.video.frame_rate.den =
++			dev->capture.timeperframe.numerator;
++
++	ret = vchiq_mmal_port_set_format(dev->instance, camera_port);
++
++	if (!ret
++	    && camera_port ==
++	    &dev->component[MMAL_COMPONENT_CAMERA]->
++	    output[MMAL_CAMERA_PORT_VIDEO]) {
++		bool overlay_enabled =
++		    !!dev->component[MMAL_COMPONENT_PREVIEW]->enabled;
++		struct vchiq_mmal_port *preview_port =
++		    &dev->component[MMAL_COMPONENT_CAMERA]->
++		    output[MMAL_CAMERA_PORT_PREVIEW];
++		/* Preview and encode ports need to match on resolution */
++		if (overlay_enabled) {
++			/* Need to disable the overlay before we can update
++			 * the resolution
++			 */
++			ret =
++			    vchiq_mmal_port_disable(dev->instance,
++						    preview_port);
++			if (!ret)
++				ret =
++				    vchiq_mmal_port_connect_tunnel(
++						dev->instance,
++						preview_port,
++						NULL);
++		}
++		preview_port->es.video.width = f->fmt.pix.width;
++		preview_port->es.video.height = f->fmt.pix.height;
++		preview_port->es.video.crop.x = 0;
++		preview_port->es.video.crop.y = 0;
++		preview_port->es.video.crop.width = f->fmt.pix.width;
++		preview_port->es.video.crop.height = f->fmt.pix.height;
++		preview_port->es.video.frame_rate.num = 30;
++		preview_port->es.video.frame_rate.den = 1;
++		ret = vchiq_mmal_port_set_format(dev->instance, preview_port);
++		if (overlay_enabled) {
++			ret = vchiq_mmal_port_connect_tunnel(
++				dev->instance,
++				preview_port,
++				&dev->component[MMAL_COMPONENT_PREVIEW]->input[0]);
++			if (!ret)
++				ret = vchiq_mmal_port_enable(dev->instance,
++							     preview_port,
++							     NULL);
++		}
++	}
++
++	if (ret) {
++		v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
++			 "%s failed to set format\n", __func__);
++		/* ensure capture is not going to be tried */
++		dev->capture.port = NULL;
++	} else {
++		if (encode_component) {
++			v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
++				 "vid_cap - set up encode comp\n");
++
++			/* configure buffering */
++			camera_port->current_buffer.size =
++			    camera_port->recommended_buffer.size;
++			camera_port->current_buffer.num =
++			    camera_port->recommended_buffer.num;
++
++			ret =
++			    vchiq_mmal_port_connect_tunnel(
++					dev->instance,
++					camera_port,
++					&encode_component->input[0]);
++			if (ret) {
++				v4l2_dbg(1, bcm2835_v4l2_debug,
++					 &dev->v4l2_dev,
++					 "%s failed to create connection\n",
++					 __func__);
++				/* ensure capture is not going to be tried */
++				dev->capture.port = NULL;
++			} else {
++				port->es.video.width = f->fmt.pix.width;
++				port->es.video.height = f->fmt.pix.height;
++				port->es.video.crop.x = 0;
++				port->es.video.crop.y = 0;
++				port->es.video.crop.width = f->fmt.pix.width;
++				port->es.video.crop.height = f->fmt.pix.height;
++				port->es.video.frame_rate.num =
++					  dev->capture.timeperframe.denominator;
++				port->es.video.frame_rate.den =
++					  dev->capture.timeperframe.numerator;
++
++				port->format.encoding = mfmt->mmal;
++				port->format.encoding_variant = 0;
++				/* Set any encoding specific parameters */
++				switch (mfmt->mmal_component) {
++				case MMAL_COMPONENT_VIDEO_ENCODE:
++					port->format.bitrate =
++					    dev->capture.encode_bitrate;
++					break;
++				case MMAL_COMPONENT_IMAGE_ENCODE:
++					/* Could set EXIF parameters here */
++					break;
++				default:
++					break;
++				}
++				ret = vchiq_mmal_port_set_format(dev->instance,
++								 port);
++				if (ret)
++					v4l2_dbg(1, bcm2835_v4l2_debug,
++						 &dev->v4l2_dev,
++						 "%s failed to set format\n",
++						 __func__);
++			}
++
++			if (!ret) {
++				ret = vchiq_mmal_component_enable(
++						dev->instance,
++						encode_component);
++				if (ret) {
++					v4l2_dbg(1, bcm2835_v4l2_debug,
++					   &dev->v4l2_dev,
++					   "%s Failed to enable encode components\n",
++					   __func__);
++				}
++			}
++			if (!ret) {
++				/* configure buffering */
++				port->current_buffer.num = 1;
++				port->current_buffer.size =
++				    f->fmt.pix.sizeimage;
++				if (port->format.encoding ==
++				    MMAL_ENCODING_JPEG) {
++					v4l2_dbg(1, bcm2835_v4l2_debug,
++					    &dev->v4l2_dev,
++					    "JPG - buf size now %d was %d\n",
++					    f->fmt.pix.sizeimage,
++					    port->current_buffer.size);
++					port->current_buffer.size =
++					    (f->fmt.pix.sizeimage <
++					     (100 << 10))
++					    ? (100 << 10) : f->fmt.pix.
++					    sizeimage;
++				}
++				v4l2_dbg(1, bcm2835_v4l2_debug,
++					 &dev->v4l2_dev,
++					 "vid_cap - cur_buf.size set to %d\n",
++					 f->fmt.pix.sizeimage);
++				port->current_buffer.alignment = 0;
++			}
++		} else {
++			/* configure buffering */
++			camera_port->current_buffer.num = 1;
++			camera_port->current_buffer.size = f->fmt.pix.sizeimage;
++			camera_port->current_buffer.alignment = 0;
++		}
++
++		if (!ret) {
++			dev->capture.fmt = mfmt;
++			dev->capture.stride = f->fmt.pix.bytesperline;
++			dev->capture.width = camera_port->es.video.crop.width;
++			dev->capture.height = camera_port->es.video.crop.height;
++
++			/* select port for capture */
++			dev->capture.port = port;
++			dev->capture.camera_port = camera_port;
++			dev->capture.encode_component = encode_component;
++			v4l2_dbg(1, bcm2835_v4l2_debug,
++				 &dev->v4l2_dev,
++				"Set dev->capture.fmt %08X, %dx%d, stride %d",
++				port->format.encoding,
++				dev->capture.width, dev->capture.height,
++				dev->capture.stride);
++		}
++	}
++
++	/* todo: Need to convert the vchiq/mmal error into a v4l2 error. */
++	return ret;
++}
++
++static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
++				struct v4l2_format *f)
++{
++	int ret;
++	struct bm2835_mmal_dev *dev = video_drvdata(file);
++	struct mmal_fmt *mfmt;
++
++	/* try the format to set valid parameters */
++	ret = vidioc_try_fmt_vid_cap(file, priv, f);
++	if (ret) {
++		v4l2_err(&dev->v4l2_dev,
++			 "vid_cap - vidioc_try_fmt_vid_cap failed\n");
++		return ret;
++	}
++
++	/* if a capture is running refuse to set format */
++	if (vb2_is_busy(&dev->capture.vb_vidq)) {
++		v4l2_info(&dev->v4l2_dev, "%s device busy\n", __func__);
++		return -EBUSY;
++	}
++
++	/* If the format is unsupported v4l2 says we should switch to
++	 * a supported one and not return an error. */
++	mfmt = get_format(f);
++	if (!mfmt) {
++		v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
++			 "Fourcc format (0x%08x) unknown.\n",
++			 f->fmt.pix.pixelformat);
++		f->fmt.pix.pixelformat = formats[0].fourcc;
++		mfmt = get_format(f);
++	}
++
++	ret = mmal_setup_components(dev, f);
++	if (ret != 0)
++		v4l2_err(&dev->v4l2_dev,
++			 "%s: failed to setup mmal components: %d\n",
++			 __func__, ret);
++
++	return ret;
++}
++
++/* timeperframe is arbitrary and continous */
++static int vidioc_enum_frameintervals(struct file *file, void *priv,
++					     struct v4l2_frmivalenum *fival)
++{
++	if (fival->index)
++		return -EINVAL;
++
++	/* regarding width & height - we support any */
++
++	fival->type = V4L2_FRMIVAL_TYPE_CONTINUOUS;
++
++	/* fill in stepwise (step=1.0 is requred by V4L2 spec) */
++	fival->stepwise.min  = tpf_min;
++	fival->stepwise.max  = tpf_max;
++	fival->stepwise.step = (struct v4l2_fract) {1, 1};
++
++	return 0;
++}
++
++static int vidioc_g_parm(struct file *file, void *priv,
++			  struct v4l2_streamparm *parm)
++{
++	struct bm2835_mmal_dev *dev = video_drvdata(file);
++
++	if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
++		return -EINVAL;
++
++	parm->parm.capture.capability   = V4L2_CAP_TIMEPERFRAME;
++	parm->parm.capture.timeperframe = dev->capture.timeperframe;
++	parm->parm.capture.readbuffers  = 1;
++	return 0;
++}
++
++#define FRACT_CMP(a, OP, b)	\
++	((u64)(a).numerator * (b).denominator  OP  \
++	 (u64)(b).numerator * (a).denominator)
++
++static int vidioc_s_parm(struct file *file, void *priv,
++			  struct v4l2_streamparm *parm)
++{
++	struct bm2835_mmal_dev *dev = video_drvdata(file);
++	struct v4l2_fract tpf;
++	struct mmal_parameter_rational fps_param;
++	int ret;
++
++	if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
++		return -EINVAL;
++
++	tpf = parm->parm.capture.timeperframe;
++
++	/* tpf: {*, 0} resets timing; clip to [min, max]*/
++	tpf = tpf.denominator ? tpf : tpf_default;
++	tpf = FRACT_CMP(tpf, <, tpf_min) ? tpf_min : tpf;
++	tpf = FRACT_CMP(tpf, >, tpf_max) ? tpf_max : tpf;
++
++	dev->capture.timeperframe = tpf;
++	parm->parm.capture.timeperframe = tpf;
++	parm->parm.capture.readbuffers  = 1;
++
++	fps_param.num = dev->capture.timeperframe.denominator;
++	fps_param.den = dev->capture.timeperframe.numerator;
++	ret = vchiq_mmal_port_parameter_set(dev->instance,
++				      &dev->component[MMAL_COMPONENT_CAMERA]->
++					output[MMAL_CAMERA_PORT_PREVIEW],
++				      MMAL_PARAMETER_VIDEO_FRAME_RATE,
++				      &fps_param, sizeof(fps_param));
++	ret += vchiq_mmal_port_parameter_set(dev->instance,
++				      &dev->component[MMAL_COMPONENT_CAMERA]->
++					output[MMAL_CAMERA_PORT_VIDEO],
++				      MMAL_PARAMETER_VIDEO_FRAME_RATE,
++				      &fps_param, sizeof(fps_param));
++	ret += vchiq_mmal_port_parameter_set(dev->instance,
++				      &dev->component[MMAL_COMPONENT_CAMERA]->
++					output[MMAL_CAMERA_PORT_CAPTURE],
++				      MMAL_PARAMETER_VIDEO_FRAME_RATE,
++				      &fps_param, sizeof(fps_param));
++	if (ret)
++		v4l2_dbg(0, bcm2835_v4l2_debug, &dev->v4l2_dev,
++		 "Failed to set fps ret %d\n",
++		 ret);
++
++	return 0;
++}
++
++static const struct v4l2_ioctl_ops camera0_ioctl_ops = {
++	/* overlay */
++	.vidioc_enum_fmt_vid_overlay = vidioc_enum_fmt_vid_overlay,
++	.vidioc_g_fmt_vid_overlay = vidioc_g_fmt_vid_overlay,
++	.vidioc_try_fmt_vid_overlay = vidioc_try_fmt_vid_overlay,
++	.vidioc_s_fmt_vid_overlay = vidioc_s_fmt_vid_overlay,
++	.vidioc_overlay = vidioc_overlay,
++	.vidioc_g_fbuf = vidioc_g_fbuf,
++
++	/* inputs */
++	.vidioc_enum_input = vidioc_enum_input,
++	.vidioc_g_input = vidioc_g_input,
++	.vidioc_s_input = vidioc_s_input,
++
++	/* capture */
++	.vidioc_querycap = vidioc_querycap,
++	.vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
++	.vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap,
++	.vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap,
++	.vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
++
++	/* buffer management */
++	.vidioc_reqbufs = vb2_ioctl_reqbufs,
++	.vidioc_create_bufs = vb2_ioctl_create_bufs,
++	.vidioc_prepare_buf = vb2_ioctl_prepare_buf,
++	.vidioc_querybuf = vb2_ioctl_querybuf,
++	.vidioc_qbuf = vb2_ioctl_qbuf,
++	.vidioc_dqbuf = vb2_ioctl_dqbuf,
++	.vidioc_enum_frameintervals = vidioc_enum_frameintervals,
++	.vidioc_g_parm        = vidioc_g_parm,
++	.vidioc_s_parm        = vidioc_s_parm,
++	.vidioc_streamon = vb2_ioctl_streamon,
++	.vidioc_streamoff = vb2_ioctl_streamoff,
++
++	.vidioc_log_status = v4l2_ctrl_log_status,
++	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
++	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
++};
++
++/* ------------------------------------------------------------------
++	Driver init/finalise
++   ------------------------------------------------------------------*/
++
++static const struct v4l2_file_operations camera0_fops = {
++	.owner = THIS_MODULE,
++	.open = v4l2_fh_open,
++	.release = vb2_fop_release,
++	.read = vb2_fop_read,
++	.poll = vb2_fop_poll,
++	.unlocked_ioctl = video_ioctl2,	/* V4L2 ioctl handler */
++	.mmap = vb2_fop_mmap,
++};
++
++static struct video_device vdev_template = {
++	.name = "camera0",
++	.fops = &camera0_fops,
++	.ioctl_ops = &camera0_ioctl_ops,
++	.release = video_device_release_empty,
++};
++
++static int set_camera_parameters(struct vchiq_mmal_instance *instance,
++				 struct vchiq_mmal_component *camera)
++{
++	int ret;
++	struct mmal_parameter_camera_config cam_config = {
++		.max_stills_w = MAX_WIDTH,
++		.max_stills_h = MAX_HEIGHT,
++		.stills_yuv422 = 1,
++		.one_shot_stills = 1,
++		.max_preview_video_w = 1920,
++		.max_preview_video_h = 1088,
++		.num_preview_video_frames = 3,
++		.stills_capture_circular_buffer_height = 0,
++		.fast_preview_resume = 0,
++		.use_stc_timestamp = MMAL_PARAM_TIMESTAMP_MODE_RAW_STC
++	};
++
++	ret = vchiq_mmal_port_parameter_set(instance, &camera->control,
++					    MMAL_PARAMETER_CAMERA_CONFIG,
++					    &cam_config, sizeof(cam_config));
++	return ret;
++}
++
++/* MMAL instance and component init */
++static int __init mmal_init(struct bm2835_mmal_dev *dev)
++{
++	int ret;
++	struct mmal_es_format *format;
++
++	ret = vchiq_mmal_init(&dev->instance);
++	if (ret < 0)
++		return ret;
++
++	/* get the camera component ready */
++	ret = vchiq_mmal_component_init(dev->instance, "ril.camera",
++					&dev->component[MMAL_COMPONENT_CAMERA]);
++	if (ret < 0)
++		goto unreg_mmal;
++
++	if (dev->component[MMAL_COMPONENT_CAMERA]->outputs <
++	    MMAL_CAMERA_PORT_COUNT) {
++		ret = -EINVAL;
++		goto unreg_camera;
++	}
++
++	ret = set_camera_parameters(dev->instance,
++				    dev->component[MMAL_COMPONENT_CAMERA]);
++	if (ret < 0)
++		goto unreg_camera;
++
++	format =
++	    &dev->component[MMAL_COMPONENT_CAMERA]->
++	    output[MMAL_CAMERA_PORT_PREVIEW].format;
++
++	format->encoding = MMAL_ENCODING_OPAQUE;
++	format->encoding_variant = MMAL_ENCODING_I420;
++
++	format->es->video.width = 1024;
++	format->es->video.height = 768;
++	format->es->video.crop.x = 0;
++	format->es->video.crop.y = 0;
++	format->es->video.crop.width = 1024;
++	format->es->video.crop.height = 768;
++	format->es->video.frame_rate.num =
++			dev->capture.timeperframe.denominator;
++	format->es->video.frame_rate.den =
++			dev->capture.timeperframe.numerator;
++
++	format =
++	    &dev->component[MMAL_COMPONENT_CAMERA]->
++	    output[MMAL_CAMERA_PORT_VIDEO].format;
++
++	format->encoding = MMAL_ENCODING_OPAQUE;
++	format->encoding_variant = MMAL_ENCODING_I420;
++
++	format->es->video.width = 1024;
++	format->es->video.height = 768;
++	format->es->video.crop.x = 0;
++	format->es->video.crop.y = 0;
++	format->es->video.crop.width = 1024;
++	format->es->video.crop.height = 768;
++	format->es->video.frame_rate.num =
++			dev->capture.timeperframe.denominator;
++	format->es->video.frame_rate.den =
++			dev->capture.timeperframe.numerator;
++
++	format =
++	    &dev->component[MMAL_COMPONENT_CAMERA]->
++	    output[MMAL_CAMERA_PORT_CAPTURE].format;
++
++	format->encoding = MMAL_ENCODING_OPAQUE;
++
++	format->es->video.width = 2592;
++	format->es->video.height = 1944;
++	format->es->video.crop.x = 0;
++	format->es->video.crop.y = 0;
++	format->es->video.crop.width = 2592;
++	format->es->video.crop.height = 1944;
++	format->es->video.frame_rate.num = 30;
++	format->es->video.frame_rate.den = 1;
++
++	dev->capture.width = format->es->video.width;
++	dev->capture.height = format->es->video.height;
++	dev->capture.fmt = &formats[0];
++	dev->capture.encode_component = NULL;
++	dev->capture.timeperframe = tpf_default;
++
++	/* get the preview component ready */
++	ret = vchiq_mmal_component_init(
++			dev->instance, "ril.video_render",
++			&dev->component[MMAL_COMPONENT_PREVIEW]);
++	if (ret < 0)
++		goto unreg_camera;
++
++	if (dev->component[MMAL_COMPONENT_PREVIEW]->inputs < 1) {
++		ret = -EINVAL;
++		pr_debug("too few input ports %d needed %d\n",
++			 dev->component[MMAL_COMPONENT_PREVIEW]->inputs, 1);
++		goto unreg_preview;
++	}
++
++	/* get the image encoder component ready */
++	ret = vchiq_mmal_component_init(
++		dev->instance, "ril.image_encode",
++		&dev->component[MMAL_COMPONENT_IMAGE_ENCODE]);
++	if (ret < 0)
++		goto unreg_preview;
++
++	if (dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->inputs < 1) {
++		ret = -EINVAL;
++		v4l2_err(&dev->v4l2_dev, "too few input ports %d needed %d\n",
++			 dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->inputs,
++			 1);
++		goto unreg_image_encoder;
++	}
++
++	/* get the video encoder component ready */
++	ret = vchiq_mmal_component_init(dev->instance, "ril.video_encode",
++					&dev->
++					component[MMAL_COMPONENT_VIDEO_ENCODE]);
++	if (ret < 0)
++		goto unreg_image_encoder;
++
++	if (dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->inputs < 1) {
++		ret = -EINVAL;
++		v4l2_err(&dev->v4l2_dev, "too few input ports %d needed %d\n",
++			 dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->inputs,
++			 1);
++		goto unreg_vid_encoder;
++	}
++
++	{
++		unsigned int enable = 1;
++		vchiq_mmal_port_parameter_set(
++			dev->instance,
++			&dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->control,
++			MMAL_PARAMETER_VIDEO_IMMUTABLE_INPUT,
++			&enable, sizeof(enable));
++
++		vchiq_mmal_port_parameter_set(dev->instance,
++			&dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->control,
++			MMAL_PARAMETER_MINIMISE_FRAGMENTATION,
++			&enable,
++			sizeof(enable));
++	}
++	ret = bm2835_mmal_set_all_camera_controls(dev);
++	if (ret < 0)
++		goto unreg_vid_encoder;
++
++	return 0;
++
++unreg_vid_encoder:
++	pr_err("Cleanup: Destroy video encoder\n");
++	vchiq_mmal_component_finalise(
++		dev->instance,
++		dev->component[MMAL_COMPONENT_VIDEO_ENCODE]);
++
++unreg_image_encoder:
++	pr_err("Cleanup: Destroy image encoder\n");
++	vchiq_mmal_component_finalise(
++		dev->instance,
++		dev->component[MMAL_COMPONENT_IMAGE_ENCODE]);
++
++unreg_preview:
++	pr_err("Cleanup: Destroy video render\n");
++	vchiq_mmal_component_finalise(dev->instance,
++				      dev->component[MMAL_COMPONENT_PREVIEW]);
++
++unreg_camera:
++	pr_err("Cleanup: Destroy camera\n");
++	vchiq_mmal_component_finalise(dev->instance,
++				      dev->component[MMAL_COMPONENT_CAMERA]);
++
++unreg_mmal:
++	vchiq_mmal_finalise(dev->instance);
++	return ret;
++}
++
++static int __init bm2835_mmal_init_device(struct bm2835_mmal_dev *dev,
++					  struct video_device *vfd)
++{
++	int ret;
++
++	*vfd = vdev_template;
++
++	vfd->v4l2_dev = &dev->v4l2_dev;
++
++	vfd->lock = &dev->mutex;
++
++	vfd->queue = &dev->capture.vb_vidq;
++
++	set_bit(V4L2_FL_USE_FH_PRIO, &vfd->flags);
++
++	/* video device needs to be able to access instance data */
++	video_set_drvdata(vfd, dev);
++
++	ret = video_register_device(vfd, VFL_TYPE_GRABBER, -1);
++	if (ret < 0)
++		return ret;
++
++	v4l2_info(vfd->v4l2_dev, "V4L2 device registered as %s\n",
++		  video_device_node_name(vfd));
++
++	return 0;
++}
++
++static struct v4l2_format default_v4l2_format = {
++	.fmt.pix.pixelformat = V4L2_PIX_FMT_JPEG,
++	.fmt.pix.width = 1024,
++	.fmt.pix.bytesperline = 1024 * 3 / 2,
++	.fmt.pix.height = 768,
++	.fmt.pix.sizeimage = 1<<18,
++};
++
++static int __init bm2835_mmal_init(void)
++{
++	int ret;
++	struct bm2835_mmal_dev *dev;
++	struct vb2_queue *q;
++
++	dev = kzalloc(sizeof(*gdev), GFP_KERNEL);
++	if (!dev)
++		return -ENOMEM;
++
++	/* setup device defaults */
++	dev->overlay.w.left = 150;
++	dev->overlay.w.top = 50;
++	dev->overlay.w.width = 1024;
++	dev->overlay.w.height = 768;
++	dev->overlay.clipcount = 0;
++	dev->overlay.field = V4L2_FIELD_NONE;
++
++	dev->capture.fmt = &formats[3]; /* JPEG */
++
++	/* v4l device registration */
++	snprintf(dev->v4l2_dev.name, sizeof(dev->v4l2_dev.name),
++		 "%s", BM2835_MMAL_MODULE_NAME);
++	ret = v4l2_device_register(NULL, &dev->v4l2_dev);
++	if (ret)
++		goto free_dev;
++
++	/* setup v4l controls */
++	ret = bm2835_mmal_init_controls(dev, &dev->ctrl_handler);
++	if (ret < 0)
++		goto unreg_dev;
++	dev->v4l2_dev.ctrl_handler = &dev->ctrl_handler;
++
++	/* mmal init */
++	ret = mmal_init(dev);
++	if (ret < 0)
++		goto unreg_dev;
++
++	/* initialize queue */
++	q = &dev->capture.vb_vidq;
++	memset(q, 0, sizeof(*q));
++	q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
++	q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_READ;
++	q->drv_priv = dev;
++	q->buf_struct_size = sizeof(struct mmal_buffer);
++	q->ops = &bm2835_mmal_video_qops;
++	q->mem_ops = &vb2_vmalloc_memops;
++	q->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
++	ret = vb2_queue_init(q);
++	if (ret < 0)
++		goto unreg_dev;
++
++	/* v4l2 core mutex used to protect all fops and v4l2 ioctls. */
++	mutex_init(&dev->mutex);
++
++	/* initialise video devices */
++	ret = bm2835_mmal_init_device(dev, &dev->vdev);
++	if (ret < 0)
++		goto unreg_dev;
++
++	ret = mmal_setup_components(dev, &default_v4l2_format);
++	if (ret < 0) {
++		v4l2_err(&dev->v4l2_dev,
++			 "%s: could not setup components\n", __func__);
++		goto unreg_dev;
++	}
++
++	v4l2_info(&dev->v4l2_dev,
++		  "Broadcom 2835 MMAL video capture ver %s loaded.\n",
++		  BM2835_MMAL_VERSION);
++
++	gdev = dev;
++	return 0;
++
++unreg_dev:
++	v4l2_ctrl_handler_free(&dev->ctrl_handler);
++	v4l2_device_unregister(&dev->v4l2_dev);
++
++free_dev:
++	kfree(dev);
++
++	v4l2_err(&dev->v4l2_dev,
++		 "%s: error %d while loading driver\n",
++		 BM2835_MMAL_MODULE_NAME, ret);
++
++	return ret;
++}
++
++static void __exit bm2835_mmal_exit(void)
++{
++	if (!gdev)
++		return;
++
++	v4l2_info(&gdev->v4l2_dev, "unregistering %s\n",
++		  video_device_node_name(&gdev->vdev));
++
++	video_unregister_device(&gdev->vdev);
++
++	if (gdev->capture.encode_component) {
++		v4l2_dbg(1, bcm2835_v4l2_debug, &gdev->v4l2_dev,
++			 "mmal_exit - disconnect tunnel\n");
++		vchiq_mmal_port_connect_tunnel(gdev->instance,
++					       gdev->capture.camera_port, NULL);
++		vchiq_mmal_component_disable(gdev->instance,
++					     gdev->capture.encode_component);
++	}
++	vchiq_mmal_component_disable(gdev->instance,
++				     gdev->component[MMAL_COMPONENT_CAMERA]);
++
++	vchiq_mmal_component_finalise(gdev->instance,
++				      gdev->
++				      component[MMAL_COMPONENT_VIDEO_ENCODE]);
++
++	vchiq_mmal_component_finalise(gdev->instance,
++				      gdev->
++				      component[MMAL_COMPONENT_IMAGE_ENCODE]);
++
++	vchiq_mmal_component_finalise(gdev->instance,
++				      gdev->component[MMAL_COMPONENT_PREVIEW]);
++
++	vchiq_mmal_component_finalise(gdev->instance,
++				      gdev->component[MMAL_COMPONENT_CAMERA]);
++
++	vchiq_mmal_finalise(gdev->instance);
++
++	v4l2_ctrl_handler_free(&gdev->ctrl_handler);
++
++	v4l2_device_unregister(&gdev->v4l2_dev);
++
++	kfree(gdev);
++}
++
++module_init(bm2835_mmal_init);
++module_exit(bm2835_mmal_exit);
+diff -Nur linux-3.12.6/drivers/media/platform/bcm2835/bcm2835-camera.h linux-raspberry-pi/drivers/media/platform/bcm2835/bcm2835-camera.h
+--- linux-3.12.6/drivers/media/platform/bcm2835/bcm2835-camera.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/media/platform/bcm2835/bcm2835-camera.h	2013-12-29 10:40:41.000000000 +0100
+@@ -0,0 +1,113 @@
++/*
++ * Broadcom BM2835 V4L2 driver
++ *
++ * Copyright © 2013 Raspberry Pi (Trading) Ltd.
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file COPYING in the main directory of this archive
++ * for more details.
++ *
++ * Authors: Vincent Sanders <vincent.sanders@collabora.co.uk>
++ *          Dave Stevenson <dsteve@broadcom.com>
++ *          Simon Mellor <simellor@broadcom.com>
++ *          Luke Diamand <luked@broadcom.com>
++ *
++ * core driver device
++ */
++
++#define V4L2_CTRL_COUNT 21 /* number of v4l controls */
++
++enum {
++	MMAL_COMPONENT_CAMERA = 0,
++	MMAL_COMPONENT_PREVIEW,
++	MMAL_COMPONENT_IMAGE_ENCODE,
++	MMAL_COMPONENT_VIDEO_ENCODE,
++	MMAL_COMPONENT_COUNT
++};
++
++enum {
++	MMAL_CAMERA_PORT_PREVIEW = 0,
++	MMAL_CAMERA_PORT_VIDEO,
++	MMAL_CAMERA_PORT_CAPTURE,
++	MMAL_CAMERA_PORT_COUNT
++};
++
++#define PREVIEW_LAYER      2
++
++extern int bcm2835_v4l2_debug;
++
++struct bm2835_mmal_dev {
++	/* v4l2 devices */
++	struct v4l2_device     v4l2_dev;
++	struct video_device    vdev;
++	struct mutex           mutex;
++
++	/* controls */
++	struct v4l2_ctrl_handler  ctrl_handler;
++	struct v4l2_ctrl          *ctrls[V4L2_CTRL_COUNT];
++	struct mmal_colourfx      colourfx;
++	int                       hflip;
++	int                       vflip;
++	enum mmal_parameter_exposuremode exposure_mode;
++	unsigned int		  manual_shutter_speed;
++
++	/* allocated mmal instance and components */
++	struct vchiq_mmal_instance   *instance;
++	struct vchiq_mmal_component  *component[MMAL_COMPONENT_COUNT];
++	int camera_use_count;
++
++	struct v4l2_window overlay;
++
++	struct {
++		unsigned int     width;  /* width */
++		unsigned int     height;  /* height */
++		unsigned int     stride;  /* stride */
++		struct mmal_fmt  *fmt;
++		struct v4l2_fract          timeperframe;
++
++		/* H264 encode bitrate */
++		int         encode_bitrate;
++		/* H264 bitrate mode. CBR/VBR */
++		int         encode_bitrate_mode;
++		/* JPEG Q-factor */
++		int         q_factor;
++
++		struct vb2_queue	vb_vidq;
++
++		/* VC start timestamp for streaming */
++		s64         vc_start_timestamp;
++		/* Kernel start timestamp for streaming */
++		struct timeval kernel_start_ts;
++
++		struct vchiq_mmal_port  *port; /* port being used for capture */
++		/* camera port being used for capture */
++		struct vchiq_mmal_port  *camera_port;
++		/* component being used for encode */
++		struct vchiq_mmal_component *encode_component;
++		/* number of frames remaining which driver should capture */
++		unsigned int  frame_count;
++		/* last frame completion */
++		struct completion  frame_cmplt;
++
++	} capture;
++
++};
++
++int bm2835_mmal_init_controls(
++			struct bm2835_mmal_dev *dev,
++			struct v4l2_ctrl_handler *hdl);
++
++int bm2835_mmal_set_all_camera_controls(struct bm2835_mmal_dev *dev);
++
++
++/* Debug helpers */
++
++#define v4l2_dump_pix_format(level, debug, dev, pix_fmt, desc)	\
++{	\
++	v4l2_dbg(level, debug, dev,	\
++"%s: w %u h %u field %u pfmt 0x%x bpl %u sz_img %u colorspace 0x%x priv %u\n", \
++		desc == NULL ? "" : desc,	\
++		(pix_fmt)->width, (pix_fmt)->height, (pix_fmt)->field,	\
++		(pix_fmt)->pixelformat, (pix_fmt)->bytesperline,	\
++		(pix_fmt)->sizeimage, (pix_fmt)->colorspace, (pix_fmt)->priv); \
++}
+diff -Nur linux-3.12.6/drivers/media/platform/bcm2835/controls.c linux-raspberry-pi/drivers/media/platform/bcm2835/controls.c
+--- linux-3.12.6/drivers/media/platform/bcm2835/controls.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/media/platform/bcm2835/controls.c	2013-12-29 10:40:41.000000000 +0100
+@@ -0,0 +1,902 @@
++/*
++ * Broadcom BM2835 V4L2 driver
++ *
++ * Copyright © 2013 Raspberry Pi (Trading) Ltd.
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file COPYING in the main directory of this archive
++ * for more details.
++ *
++ * Authors: Vincent Sanders <vincent.sanders@collabora.co.uk>
++ *          Dave Stevenson <dsteve@broadcom.com>
++ *          Simon Mellor <simellor@broadcom.com>
++ *          Luke Diamand <luked@broadcom.com>
++ */
++
++#include <linux/errno.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <media/videobuf2-vmalloc.h>
++#include <media/v4l2-device.h>
++#include <media/v4l2-ioctl.h>
++#include <media/v4l2-ctrls.h>
++#include <media/v4l2-fh.h>
++#include <media/v4l2-event.h>
++#include <media/v4l2-common.h>
++
++#include "mmal-common.h"
++#include "mmal-vchiq.h"
++#include "mmal-parameters.h"
++#include "bcm2835-camera.h"
++
++/* The supported V4L2_CID_AUTO_EXPOSURE_BIAS values are from -4.0 to +4.0.
++ * MMAL values are in 1/6th increments so the MMAL range is -24 to +24.
++ * V4L2 docs say value "is expressed in terms of EV, drivers should interpret
++ * the values as 0.001 EV units, where the value 1000 stands for +1 EV."
++ * V4L2 is limited to a max of 32 values in a menu, so count in 1/3rds from
++ * -4 to +4
++ */
++static const s64 ev_bias_qmenu[] = {
++	-4000, -3667, -3333,
++	-3000, -2667, -2333,
++	-2000, -1667, -1333,
++	-1000,  -667,  -333,
++	    0,   333,   667,
++	 1000,  1333,  1667,
++	 2000,  2333,  2667,
++	 3000,  3333,  3667,
++	 4000
++};
++
++/* Supported ISO values
++ * ISOO = auto ISO
++ */
++static const s64 iso_qmenu[] = {
++	0, 100, 200, 400, 800,
++};
++
++static const s64 mains_freq_qmenu[] = {
++	V4L2_CID_POWER_LINE_FREQUENCY_DISABLED,
++	V4L2_CID_POWER_LINE_FREQUENCY_50HZ,
++	V4L2_CID_POWER_LINE_FREQUENCY_60HZ,
++	V4L2_CID_POWER_LINE_FREQUENCY_AUTO
++};
++
++/* Supported video encode modes */
++static const s64 bitrate_mode_qmenu[] = {
++	(s64)V4L2_MPEG_VIDEO_BITRATE_MODE_VBR,
++	(s64)V4L2_MPEG_VIDEO_BITRATE_MODE_CBR,
++};
++
++
++enum bm2835_mmal_ctrl_type {
++	MMAL_CONTROL_TYPE_STD,
++	MMAL_CONTROL_TYPE_STD_MENU,
++	MMAL_CONTROL_TYPE_INT_MENU,
++	MMAL_CONTROL_TYPE_CLUSTER, /* special cluster entry */
++};
++
++struct bm2835_mmal_v4l2_ctrl;
++
++typedef	int(bm2835_mmal_v4l2_ctrl_cb)(
++				struct bm2835_mmal_dev *dev,
++				struct v4l2_ctrl *ctrl,
++				const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl);
++
++struct bm2835_mmal_v4l2_ctrl {
++	u32 id; /* v4l2 control identifier */
++	enum bm2835_mmal_ctrl_type type;
++	/* control minimum value or
++	 * mask for MMAL_CONTROL_TYPE_STD_MENU */
++	s32 min;
++	s32 max; /* maximum value of control */
++	s32 def;  /* default value of control */
++	s32 step; /* step size of the control */
++	const s64 *imenu; /* integer menu array */
++	u32 mmal_id; /* mmal parameter id */
++	bm2835_mmal_v4l2_ctrl_cb *setter;
++	bool ignore_errors;
++};
++
++struct v4l2_to_mmal_effects_setting {
++	u32 v4l2_effect;
++	u32 mmal_effect;
++	s32 col_fx_enable;
++	s32 col_fx_fixed_cbcr;
++	u32 u;
++	u32 v;
++	u32 num_effect_params;
++	u32 effect_params[MMAL_MAX_IMAGEFX_PARAMETERS];
++};
++
++static const struct v4l2_to_mmal_effects_setting
++	v4l2_to_mmal_effects_values[] = {
++	{  V4L2_COLORFX_NONE,         MMAL_PARAM_IMAGEFX_NONE,
++		0,   0,    0,    0,   0, {0, 0, 0, 0, 0} },
++	{  V4L2_COLORFX_BW,           MMAL_PARAM_IMAGEFX_NONE,
++		1,   0,    128,  128, 0, {0, 0, 0, 0, 0} },
++	{  V4L2_COLORFX_SEPIA,        MMAL_PARAM_IMAGEFX_NONE,
++		1,   0,    87,   151, 0, {0, 0, 0, 0, 0} },
++	{  V4L2_COLORFX_NEGATIVE,     MMAL_PARAM_IMAGEFX_NEGATIVE,
++		0,   0,    0,    0,   0, {0, 0, 0, 0, 0} },
++	{  V4L2_COLORFX_EMBOSS,       MMAL_PARAM_IMAGEFX_EMBOSS,
++		0,   0,    0,    0,   0, {0, 0, 0, 0, 0} },
++	{  V4L2_COLORFX_SKETCH,       MMAL_PARAM_IMAGEFX_SKETCH,
++		0,   0,    0,    0,   0, {0, 0, 0, 0, 0} },
++	{  V4L2_COLORFX_SKY_BLUE,     MMAL_PARAM_IMAGEFX_PASTEL,
++		0,   0,    0,    0,   0, {0, 0, 0, 0, 0} },
++	{  V4L2_COLORFX_GRASS_GREEN,  MMAL_PARAM_IMAGEFX_WATERCOLOUR,
++		0,   0,    0,    0,   0, {0, 0, 0, 0, 0} },
++	{  V4L2_COLORFX_SKIN_WHITEN,  MMAL_PARAM_IMAGEFX_WASHEDOUT,
++		0,   0,    0,    0,   0, {0, 0, 0, 0, 0} },
++	{  V4L2_COLORFX_VIVID,        MMAL_PARAM_IMAGEFX_SATURATION,
++		0,   0,    0,    0,   0, {0, 0, 0, 0, 0} },
++	{  V4L2_COLORFX_AQUA,         MMAL_PARAM_IMAGEFX_NONE,
++		1,   0,    171,  121, 0, {0, 0, 0, 0, 0} },
++	{  V4L2_COLORFX_ART_FREEZE,   MMAL_PARAM_IMAGEFX_HATCH,
++		0,   0,    0,    0,   0, {0, 0, 0, 0, 0} },
++	{  V4L2_COLORFX_SILHOUETTE,   MMAL_PARAM_IMAGEFX_FILM,
++		0,   0,    0,    0,   0, {0, 0, 0, 0, 0} },
++	{  V4L2_COLORFX_SOLARIZATION, MMAL_PARAM_IMAGEFX_SOLARIZE,
++		0,   0,    0,    0,   5, {1, 128, 160, 160, 48} },
++	{  V4L2_COLORFX_ANTIQUE,      MMAL_PARAM_IMAGEFX_COLOURBALANCE,
++		0,   0,    0,    0,   3, {108, 274, 238, 0, 0} },
++	{  V4L2_COLORFX_SET_CBCR,     MMAL_PARAM_IMAGEFX_NONE,
++		1,   1,    0,    0,   0, {0, 0, 0, 0, 0} }
++};
++
++
++/* control handlers*/
++
++static int ctrl_set_rational(struct bm2835_mmal_dev *dev,
++		      struct v4l2_ctrl *ctrl,
++		      const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl)
++{
++	struct mmal_parameter_rational rational_value;
++	struct vchiq_mmal_port *control;
++
++	control = &dev->component[MMAL_COMPONENT_CAMERA]->control;
++
++	rational_value.num = ctrl->val;
++	rational_value.den = 100;
++
++	return vchiq_mmal_port_parameter_set(dev->instance, control,
++					     mmal_ctrl->mmal_id,
++					     &rational_value,
++					     sizeof(rational_value));
++}
++
++static int ctrl_set_value(struct bm2835_mmal_dev *dev,
++		      struct v4l2_ctrl *ctrl,
++		      const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl)
++{
++	u32 u32_value;
++	struct vchiq_mmal_port *control;
++
++	control = &dev->component[MMAL_COMPONENT_CAMERA]->control;
++
++	u32_value = ctrl->val;
++
++	return vchiq_mmal_port_parameter_set(dev->instance, control,
++					     mmal_ctrl->mmal_id,
++					     &u32_value, sizeof(u32_value));
++}
++
++static int ctrl_set_value_menu(struct bm2835_mmal_dev *dev,
++		      struct v4l2_ctrl *ctrl,
++		      const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl)
++{
++	u32 u32_value;
++	struct vchiq_mmal_port *control;
++
++	if (ctrl->val > mmal_ctrl->max || ctrl->val < mmal_ctrl->min)
++		return 1;
++
++	control = &dev->component[MMAL_COMPONENT_CAMERA]->control;
++
++	u32_value = mmal_ctrl->imenu[ctrl->val];
++
++	return vchiq_mmal_port_parameter_set(dev->instance, control,
++					     mmal_ctrl->mmal_id,
++					     &u32_value, sizeof(u32_value));
++}
++
++static int ctrl_set_value_ev(struct bm2835_mmal_dev *dev,
++		      struct v4l2_ctrl *ctrl,
++		      const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl)
++{
++	s32 s32_value;
++	struct vchiq_mmal_port *control;
++
++	control = &dev->component[MMAL_COMPONENT_CAMERA]->control;
++
++	s32_value = (ctrl->val-12)*2;	/* Convert from index to 1/6ths */
++
++	return vchiq_mmal_port_parameter_set(dev->instance, control,
++					     mmal_ctrl->mmal_id,
++					     &s32_value, sizeof(s32_value));
++}
++
++static int ctrl_set_rotate(struct bm2835_mmal_dev *dev,
++		      struct v4l2_ctrl *ctrl,
++		      const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl)
++{
++	int ret;
++	u32 u32_value;
++	struct vchiq_mmal_component *camera;
++
++	camera = dev->component[MMAL_COMPONENT_CAMERA];
++
++	u32_value = ((ctrl->val % 360) / 90) * 90;
++
++	ret = vchiq_mmal_port_parameter_set(dev->instance, &camera->output[0],
++					    mmal_ctrl->mmal_id,
++					    &u32_value, sizeof(u32_value));
++	if (ret < 0)
++		return ret;
++
++	ret = vchiq_mmal_port_parameter_set(dev->instance, &camera->output[1],
++					    mmal_ctrl->mmal_id,
++					    &u32_value, sizeof(u32_value));
++	if (ret < 0)
++		return ret;
++
++	ret = vchiq_mmal_port_parameter_set(dev->instance, &camera->output[2],
++					    mmal_ctrl->mmal_id,
++					    &u32_value, sizeof(u32_value));
++
++	return ret;
++}
++
++static int ctrl_set_flip(struct bm2835_mmal_dev *dev,
++		      struct v4l2_ctrl *ctrl,
++		      const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl)
++{
++	int ret;
++	u32 u32_value;
++	struct vchiq_mmal_component *camera;
++
++	if (ctrl->id == V4L2_CID_HFLIP)
++		dev->hflip = ctrl->val;
++	else
++		dev->vflip = ctrl->val;
++
++	camera = dev->component[MMAL_COMPONENT_CAMERA];
++
++	if (dev->hflip && dev->vflip)
++		u32_value = MMAL_PARAM_MIRROR_BOTH;
++	else if (dev->hflip)
++		u32_value = MMAL_PARAM_MIRROR_HORIZONTAL;
++	else if (dev->vflip)
++		u32_value = MMAL_PARAM_MIRROR_VERTICAL;
++	else
++		u32_value = MMAL_PARAM_MIRROR_NONE;
++
++	ret = vchiq_mmal_port_parameter_set(dev->instance, &camera->output[0],
++					    mmal_ctrl->mmal_id,
++					    &u32_value, sizeof(u32_value));
++	if (ret < 0)
++		return ret;
++
++	ret = vchiq_mmal_port_parameter_set(dev->instance, &camera->output[1],
++					    mmal_ctrl->mmal_id,
++					    &u32_value, sizeof(u32_value));
++	if (ret < 0)
++		return ret;
++
++	ret = vchiq_mmal_port_parameter_set(dev->instance, &camera->output[2],
++					    mmal_ctrl->mmal_id,
++					    &u32_value, sizeof(u32_value));
++
++	return ret;
++
++}
++
++static int ctrl_set_exposure(struct bm2835_mmal_dev *dev,
++		      struct v4l2_ctrl *ctrl,
++		      const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl)
++{
++	enum mmal_parameter_exposuremode exp_mode = dev->exposure_mode;
++	u32 shutter_speed = 0;
++	struct vchiq_mmal_port *control;
++	int ret = 0;
++
++	control = &dev->component[MMAL_COMPONENT_CAMERA]->control;
++
++	if (mmal_ctrl->mmal_id == MMAL_PARAMETER_SHUTTER_SPEED)	{
++		/* V4L2 is in 100usec increments.
++		 * MMAL is 1usec.
++		 */
++		dev->manual_shutter_speed = ctrl->val * 100;
++	} else if (mmal_ctrl->mmal_id == MMAL_PARAMETER_EXPOSURE_MODE) {
++		switch (ctrl->val) {
++		case V4L2_EXPOSURE_AUTO:
++			exp_mode = MMAL_PARAM_EXPOSUREMODE_AUTO;
++			break;
++
++		case V4L2_EXPOSURE_MANUAL:
++			exp_mode = MMAL_PARAM_EXPOSUREMODE_OFF;
++			break;
++
++		case V4L2_EXPOSURE_SHUTTER_PRIORITY:
++			exp_mode = MMAL_PARAM_EXPOSUREMODE_SPORTS;
++			break;
++
++		case V4L2_EXPOSURE_APERTURE_PRIORITY:
++			exp_mode = MMAL_PARAM_EXPOSUREMODE_NIGHT;
++			break;
++
++		}
++		dev->exposure_mode = exp_mode;
++	}
++
++	if (dev->exposure_mode == MMAL_PARAM_EXPOSUREMODE_OFF)
++		shutter_speed = dev->manual_shutter_speed;
++
++	ret = vchiq_mmal_port_parameter_set(dev->instance, control,
++				     MMAL_PARAMETER_SHUTTER_SPEED,
++				     &shutter_speed, sizeof(shutter_speed));
++	ret += vchiq_mmal_port_parameter_set(dev->instance, control,
++					     MMAL_PARAMETER_EXPOSURE_MODE,
++					     &exp_mode, sizeof(u32));
++	return ret;
++}
++
++static int ctrl_set_metering_mode(struct bm2835_mmal_dev *dev,
++			   struct v4l2_ctrl *ctrl,
++			   const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl)
++{
++	u32 u32_value;
++	struct vchiq_mmal_port *control;
++
++	control = &dev->component[MMAL_COMPONENT_CAMERA]->control;
++
++	switch (ctrl->val) {
++	case V4L2_EXPOSURE_METERING_AVERAGE:
++		u32_value = MMAL_PARAM_EXPOSUREMETERINGMODE_AVERAGE;
++		break;
++
++	case V4L2_EXPOSURE_METERING_CENTER_WEIGHTED:
++		u32_value = MMAL_PARAM_EXPOSUREMETERINGMODE_BACKLIT;
++		break;
++
++	case V4L2_EXPOSURE_METERING_SPOT:
++		u32_value = MMAL_PARAM_EXPOSUREMETERINGMODE_SPOT;
++		break;
++
++	/* todo matrix weighting not added to Linux API till 3.9
++	case V4L2_EXPOSURE_METERING_MATRIX:
++		u32_value = MMAL_PARAM_EXPOSUREMETERINGMODE_MATRIX;
++		break;
++	*/
++
++	}
++
++	return vchiq_mmal_port_parameter_set(dev->instance, control,
++					     mmal_ctrl->mmal_id,
++					     &u32_value, sizeof(u32_value));
++}
++
++static int ctrl_set_flicker_avoidance(struct bm2835_mmal_dev *dev,
++			   struct v4l2_ctrl *ctrl,
++			   const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl)
++{
++	u32 u32_value;
++	struct vchiq_mmal_port *control;
++
++	control = &dev->component[MMAL_COMPONENT_CAMERA]->control;
++
++	switch (ctrl->val) {
++	case V4L2_CID_POWER_LINE_FREQUENCY_DISABLED:
++		u32_value = MMAL_PARAM_FLICKERAVOID_OFF;
++		break;
++	case V4L2_CID_POWER_LINE_FREQUENCY_50HZ:
++		u32_value = MMAL_PARAM_FLICKERAVOID_50HZ;
++		break;
++	case V4L2_CID_POWER_LINE_FREQUENCY_60HZ:
++		u32_value = MMAL_PARAM_FLICKERAVOID_60HZ;
++		break;
++	case V4L2_CID_POWER_LINE_FREQUENCY_AUTO:
++		u32_value = MMAL_PARAM_FLICKERAVOID_AUTO;
++		break;
++	}
++
++	return vchiq_mmal_port_parameter_set(dev->instance, control,
++					     mmal_ctrl->mmal_id,
++					     &u32_value, sizeof(u32_value));
++}
++
++static int ctrl_set_awb_mode(struct bm2835_mmal_dev *dev,
++		      struct v4l2_ctrl *ctrl,
++		      const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl)
++{
++	u32 u32_value;
++	struct vchiq_mmal_port *control;
++
++	control = &dev->component[MMAL_COMPONENT_CAMERA]->control;
++
++	switch (ctrl->val) {
++	case V4L2_WHITE_BALANCE_MANUAL:
++		u32_value = MMAL_PARAM_AWBMODE_OFF;
++		break;
++
++	case V4L2_WHITE_BALANCE_AUTO:
++		u32_value = MMAL_PARAM_AWBMODE_AUTO;
++		break;
++
++	case V4L2_WHITE_BALANCE_INCANDESCENT:
++		u32_value = MMAL_PARAM_AWBMODE_INCANDESCENT;
++		break;
++
++	case V4L2_WHITE_BALANCE_FLUORESCENT:
++		u32_value = MMAL_PARAM_AWBMODE_FLUORESCENT;
++		break;
++
++	case V4L2_WHITE_BALANCE_FLUORESCENT_H:
++		u32_value = MMAL_PARAM_AWBMODE_TUNGSTEN;
++		break;
++
++	case V4L2_WHITE_BALANCE_HORIZON:
++		u32_value = MMAL_PARAM_AWBMODE_HORIZON;
++		break;
++
++	case V4L2_WHITE_BALANCE_DAYLIGHT:
++		u32_value = MMAL_PARAM_AWBMODE_SUNLIGHT;
++		break;
++
++	case V4L2_WHITE_BALANCE_FLASH:
++		u32_value = MMAL_PARAM_AWBMODE_FLASH;
++		break;
++
++	case V4L2_WHITE_BALANCE_CLOUDY:
++		u32_value = MMAL_PARAM_AWBMODE_CLOUDY;
++		break;
++
++	case V4L2_WHITE_BALANCE_SHADE:
++		u32_value = MMAL_PARAM_AWBMODE_SHADE;
++		break;
++
++	}
++
++	return vchiq_mmal_port_parameter_set(dev->instance, control,
++					     mmal_ctrl->mmal_id,
++					     &u32_value, sizeof(u32_value));
++}
++
++static int ctrl_set_image_effect(struct bm2835_mmal_dev *dev,
++		   struct v4l2_ctrl *ctrl,
++		   const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl)
++{
++	int ret = -EINVAL;
++	int i, j;
++	struct vchiq_mmal_port *control;
++	struct mmal_parameter_imagefx_parameters imagefx;
++
++	for (i = 0; i < ARRAY_SIZE(v4l2_to_mmal_effects_values); i++) {
++		if (ctrl->val == v4l2_to_mmal_effects_values[i].v4l2_effect) {
++
++			imagefx.effect =
++				v4l2_to_mmal_effects_values[i].mmal_effect;
++			imagefx.num_effect_params =
++				v4l2_to_mmal_effects_values[i].num_effect_params;
++
++			if (imagefx.num_effect_params > MMAL_MAX_IMAGEFX_PARAMETERS)
++				imagefx.num_effect_params = MMAL_MAX_IMAGEFX_PARAMETERS;
++
++			for (j = 0; j < imagefx.num_effect_params; j++)
++				imagefx.effect_parameter[j] =
++					v4l2_to_mmal_effects_values[i].effect_params[j];
++
++			dev->colourfx.enable =
++				v4l2_to_mmal_effects_values[i].col_fx_enable;
++			if (!v4l2_to_mmal_effects_values[i].col_fx_fixed_cbcr) {
++				dev->colourfx.u =
++					v4l2_to_mmal_effects_values[i].u;
++				dev->colourfx.v =
++					v4l2_to_mmal_effects_values[i].v;
++			}
++
++			control = &dev->component[MMAL_COMPONENT_CAMERA]->control;
++
++			ret = vchiq_mmal_port_parameter_set(
++					dev->instance, control,
++					MMAL_PARAMETER_IMAGE_EFFECT_PARAMETERS,
++					&imagefx, sizeof(imagefx));
++			if (ret)
++				goto exit;
++
++			ret = vchiq_mmal_port_parameter_set(
++					dev->instance, control,
++					MMAL_PARAMETER_COLOUR_EFFECT,
++					&dev->colourfx, sizeof(dev->colourfx));
++		}
++	}
++
++exit:
++	v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
++		 "mmal_ctrl:%p ctrl id:0x%x ctrl val:%d imagefx:0x%x color_effect:%s u:%d v:%d ret %d(%d)\n",
++				mmal_ctrl, ctrl->id, ctrl->val, imagefx.effect,
++				dev->colourfx.enable ? "true" : "false",
++				dev->colourfx.u, dev->colourfx.v,
++				ret, (ret == 0 ? 0 : -EINVAL));
++	return (ret == 0 ? 0 : EINVAL);
++}
++
++static int ctrl_set_colfx(struct bm2835_mmal_dev *dev,
++		   struct v4l2_ctrl *ctrl,
++		   const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl)
++{
++	int ret = -EINVAL;
++	struct vchiq_mmal_port *control;
++
++	control = &dev->component[MMAL_COMPONENT_CAMERA]->control;
++
++	dev->colourfx.enable = (ctrl->val & 0xff00) >> 8;
++	dev->colourfx.enable = ctrl->val & 0xff;
++
++	ret = vchiq_mmal_port_parameter_set(dev->instance, control,
++					MMAL_PARAMETER_COLOUR_EFFECT,
++					&dev->colourfx, sizeof(dev->colourfx));
++
++	v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
++		 "After: mmal_ctrl:%p ctrl id:0x%x ctrl val:%d ret %d(%d)\n",
++			mmal_ctrl, ctrl->id, ctrl->val, ret,
++			(ret == 0 ? 0 : -EINVAL));
++	return (ret == 0 ? 0 : EINVAL);
++}
++
++static int ctrl_set_bitrate(struct bm2835_mmal_dev *dev,
++		   struct v4l2_ctrl *ctrl,
++		   const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl)
++{
++	int ret;
++	struct vchiq_mmal_port *encoder_out;
++
++	dev->capture.encode_bitrate = ctrl->val;
++
++	encoder_out = &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0];
++
++	ret = vchiq_mmal_port_parameter_set(dev->instance, encoder_out,
++					    mmal_ctrl->mmal_id,
++					    &ctrl->val, sizeof(ctrl->val));
++	ret = 0;
++	return ret;
++}
++
++static int ctrl_set_bitrate_mode(struct bm2835_mmal_dev *dev,
++		   struct v4l2_ctrl *ctrl,
++		   const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl)
++{
++	u32 bitrate_mode;
++	struct vchiq_mmal_port *encoder_out;
++
++	encoder_out = &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0];
++
++	dev->capture.encode_bitrate_mode = ctrl->val;
++	switch (ctrl->val) {
++	default:
++	case V4L2_MPEG_VIDEO_BITRATE_MODE_VBR:
++		bitrate_mode = MMAL_VIDEO_RATECONTROL_VARIABLE;
++		break;
++	case V4L2_MPEG_VIDEO_BITRATE_MODE_CBR:
++		bitrate_mode = MMAL_VIDEO_RATECONTROL_CONSTANT;
++		break;
++	}
++
++	vchiq_mmal_port_parameter_set(dev->instance, encoder_out,
++					     mmal_ctrl->mmal_id,
++					     &bitrate_mode,
++					     sizeof(bitrate_mode));
++	return 0;
++}
++
++static int ctrl_set_image_encode_output(struct bm2835_mmal_dev *dev,
++		      struct v4l2_ctrl *ctrl,
++		      const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl)
++{
++	u32 u32_value;
++	struct vchiq_mmal_port *jpeg_out;
++
++	jpeg_out = &dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->output[0];
++
++	u32_value = ctrl->val;
++
++	return vchiq_mmal_port_parameter_set(dev->instance, jpeg_out,
++					     mmal_ctrl->mmal_id,
++					     &u32_value, sizeof(u32_value));
++}
++
++static int ctrl_set_video_encode_param_output(struct bm2835_mmal_dev *dev,
++		      struct v4l2_ctrl *ctrl,
++		      const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl)
++{
++	u32 u32_value;
++	struct vchiq_mmal_port *vid_enc_ctl;
++
++	vid_enc_ctl = &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0];
++
++	u32_value = ctrl->val;
++
++	return vchiq_mmal_port_parameter_set(dev->instance, vid_enc_ctl,
++					     mmal_ctrl->mmal_id,
++					     &u32_value, sizeof(u32_value));
++}
++
++static int bm2835_mmal_s_ctrl(struct v4l2_ctrl *ctrl)
++{
++	struct bm2835_mmal_dev *dev =
++		container_of(ctrl->handler, struct bm2835_mmal_dev,
++			     ctrl_handler);
++	const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl = ctrl->priv;
++	int ret;
++
++	if ((mmal_ctrl == NULL) ||
++	    (mmal_ctrl->id != ctrl->id) ||
++	    (mmal_ctrl->setter == NULL)) {
++		pr_warn("mmal_ctrl:%p ctrl id:%d\n", mmal_ctrl, ctrl->id);
++		return -EINVAL;
++	}
++
++	ret = mmal_ctrl->setter(dev, ctrl, mmal_ctrl);
++	if (mmal_ctrl->ignore_errors)
++		ret = 0;
++	return ret;
++}
++
++static const struct v4l2_ctrl_ops bm2835_mmal_ctrl_ops = {
++	.s_ctrl = bm2835_mmal_s_ctrl,
++};
++
++
++
++static const struct bm2835_mmal_v4l2_ctrl v4l2_ctrls[V4L2_CTRL_COUNT] = {
++	{
++		V4L2_CID_SATURATION, MMAL_CONTROL_TYPE_STD,
++		-100, 100, 0, 1, NULL,
++		MMAL_PARAMETER_SATURATION,
++		&ctrl_set_rational,
++		false
++	},
++	{
++		V4L2_CID_SHARPNESS, MMAL_CONTROL_TYPE_STD,
++		-100, 100, 0, 1, NULL,
++		MMAL_PARAMETER_SHARPNESS,
++		&ctrl_set_rational,
++		false
++	},
++	{
++		V4L2_CID_CONTRAST, MMAL_CONTROL_TYPE_STD,
++		-100, 100, 0, 1, NULL,
++		MMAL_PARAMETER_CONTRAST,
++		&ctrl_set_rational,
++		false
++	},
++	{
++		V4L2_CID_BRIGHTNESS, MMAL_CONTROL_TYPE_STD,
++		0, 100, 50, 1, NULL,
++		MMAL_PARAMETER_BRIGHTNESS,
++		&ctrl_set_rational,
++		false
++	},
++	{
++		V4L2_CID_ISO_SENSITIVITY, MMAL_CONTROL_TYPE_INT_MENU,
++		0, ARRAY_SIZE(iso_qmenu) - 1, 0, 1, iso_qmenu,
++		MMAL_PARAMETER_ISO,
++		&ctrl_set_value_menu,
++		false
++	},
++	{
++		V4L2_CID_IMAGE_STABILIZATION, MMAL_CONTROL_TYPE_STD,
++		0, 1, 0, 1, NULL,
++		MMAL_PARAMETER_VIDEO_STABILISATION,
++		&ctrl_set_value,
++		false
++	},
++/*	{
++		0, MMAL_CONTROL_TYPE_CLUSTER, 3, 1, 0, NULL, 0, NULL
++	},
++*/	{
++		V4L2_CID_EXPOSURE_AUTO, MMAL_CONTROL_TYPE_STD_MENU,
++		~0x03, 3, V4L2_EXPOSURE_AUTO, 0, NULL,
++		MMAL_PARAMETER_EXPOSURE_MODE,
++		&ctrl_set_exposure,
++		false
++	},
++/* todo this needs mixing in with set exposure
++	{
++	       V4L2_CID_SCENE_MODE, MMAL_CONTROL_TYPE_STD_MENU,
++	},
++ */
++	{
++		V4L2_CID_EXPOSURE_ABSOLUTE, MMAL_CONTROL_TYPE_STD,
++		/* Units of 100usecs */
++		1, 1*1000*10, 100*10, 1, NULL,
++		MMAL_PARAMETER_SHUTTER_SPEED,
++		&ctrl_set_exposure,
++		false
++	},
++	{
++		V4L2_CID_AUTO_EXPOSURE_BIAS, MMAL_CONTROL_TYPE_INT_MENU,
++		0, ARRAY_SIZE(ev_bias_qmenu) - 1,
++		(ARRAY_SIZE(ev_bias_qmenu)+1)/2 - 1, 0, ev_bias_qmenu,
++		MMAL_PARAMETER_EXPOSURE_COMP,
++		&ctrl_set_value_ev,
++		false
++	},
++	{
++		V4L2_CID_EXPOSURE_METERING,
++		MMAL_CONTROL_TYPE_STD_MENU,
++		~0x7, 2, V4L2_EXPOSURE_METERING_AVERAGE, 0, NULL,
++		MMAL_PARAMETER_EXP_METERING_MODE,
++		&ctrl_set_metering_mode,
++		false
++	},
++	{
++		V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE,
++		MMAL_CONTROL_TYPE_STD_MENU,
++		~0x3fe, 9, V4L2_WHITE_BALANCE_AUTO, 0, NULL,
++		MMAL_PARAMETER_AWB_MODE,
++		&ctrl_set_awb_mode,
++		false
++	},
++	{
++		V4L2_CID_COLORFX, MMAL_CONTROL_TYPE_STD_MENU,
++		0, 15, V4L2_COLORFX_NONE, 0, NULL,
++		MMAL_PARAMETER_IMAGE_EFFECT,
++		&ctrl_set_image_effect,
++		false
++	},
++	{
++		V4L2_CID_COLORFX_CBCR, MMAL_CONTROL_TYPE_STD,
++		0, 0xffff, 0x8080, 1, NULL,
++		MMAL_PARAMETER_COLOUR_EFFECT,
++		&ctrl_set_colfx,
++		false
++	},
++	{
++		V4L2_CID_ROTATE, MMAL_CONTROL_TYPE_STD,
++		0, 360, 0, 90, NULL,
++		MMAL_PARAMETER_ROTATION,
++		&ctrl_set_rotate,
++		false
++	},
++	{
++		V4L2_CID_HFLIP, MMAL_CONTROL_TYPE_STD,
++		0, 1, 0, 1, NULL,
++		MMAL_PARAMETER_MIRROR,
++		&ctrl_set_flip,
++		false
++	},
++	{
++		V4L2_CID_VFLIP, MMAL_CONTROL_TYPE_STD,
++		0, 1, 0, 1, NULL,
++		MMAL_PARAMETER_MIRROR,
++		&ctrl_set_flip,
++		false
++	},
++	{
++		V4L2_CID_MPEG_VIDEO_BITRATE_MODE, MMAL_CONTROL_TYPE_STD_MENU,
++		0, ARRAY_SIZE(bitrate_mode_qmenu) - 1,
++		0, 0, bitrate_mode_qmenu,
++		MMAL_PARAMETER_RATECONTROL,
++		&ctrl_set_bitrate_mode,
++		false
++	},
++	{
++		V4L2_CID_MPEG_VIDEO_BITRATE, MMAL_CONTROL_TYPE_STD,
++		25*1000, 25*1000*1000, 10*1000*1000, 25*1000, NULL,
++		MMAL_PARAMETER_VIDEO_BIT_RATE,
++		&ctrl_set_bitrate,
++		false
++	},
++	{
++		V4L2_CID_JPEG_COMPRESSION_QUALITY, MMAL_CONTROL_TYPE_STD,
++		1, 100,
++		30, 1, NULL,
++		MMAL_PARAMETER_JPEG_Q_FACTOR,
++		&ctrl_set_image_encode_output,
++		false
++	},
++	{
++		V4L2_CID_POWER_LINE_FREQUENCY, MMAL_CONTROL_TYPE_STD_MENU,
++		0, ARRAY_SIZE(mains_freq_qmenu) - 1,
++		1, 1, NULL,
++		MMAL_PARAMETER_FLICKER_AVOID,
++		&ctrl_set_flicker_avoidance,
++		false
++	},
++	{
++		V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER, MMAL_CONTROL_TYPE_STD,
++		0, 1,
++		0, 1, NULL,
++		MMAL_PARAMETER_VIDEO_ENCODE_INLINE_HEADER,
++		&ctrl_set_video_encode_param_output,
++		true	/* Errors ignored as requires latest firmware to work */
++	},
++};
++
++int bm2835_mmal_set_all_camera_controls(struct bm2835_mmal_dev *dev)
++{
++	int c;
++	int ret = 0;
++
++	for (c = 0; c < V4L2_CTRL_COUNT; c++) {
++		if ((dev->ctrls[c]) && (v4l2_ctrls[c].setter)) {
++			ret = v4l2_ctrls[c].setter(dev, dev->ctrls[c],
++						   &v4l2_ctrls[c]);
++			if (!v4l2_ctrls[c]. ignore_errors && ret)
++				break;
++		}
++	}
++	return ret;
++}
++
++int bm2835_mmal_init_controls(struct bm2835_mmal_dev *dev,
++			      struct v4l2_ctrl_handler *hdl)
++{
++	int c;
++	const struct bm2835_mmal_v4l2_ctrl *ctrl;
++
++	v4l2_ctrl_handler_init(hdl, V4L2_CTRL_COUNT);
++
++	for (c = 0; c < V4L2_CTRL_COUNT; c++) {
++		ctrl = &v4l2_ctrls[c];
++
++		switch (ctrl->type) {
++		case MMAL_CONTROL_TYPE_STD:
++			dev->ctrls[c] = v4l2_ctrl_new_std(hdl,
++				&bm2835_mmal_ctrl_ops, ctrl->id,
++				ctrl->min, ctrl->max, ctrl->step, ctrl->def);
++			break;
++
++		case MMAL_CONTROL_TYPE_STD_MENU:
++			dev->ctrls[c] = v4l2_ctrl_new_std_menu(hdl,
++			&bm2835_mmal_ctrl_ops, ctrl->id,
++			ctrl->max, ctrl->min, ctrl->def);
++			break;
++
++		case MMAL_CONTROL_TYPE_INT_MENU:
++			dev->ctrls[c] = v4l2_ctrl_new_int_menu(hdl,
++				&bm2835_mmal_ctrl_ops, ctrl->id,
++				ctrl->max, ctrl->def, ctrl->imenu);
++			break;
++
++		case MMAL_CONTROL_TYPE_CLUSTER:
++			/* skip this entry when constructing controls */
++			continue;
++		}
++
++		if (hdl->error)
++			break;
++
++		dev->ctrls[c]->priv = (void *)ctrl;
++	}
++
++	if (hdl->error) {
++		pr_err("error adding control %d/%d id 0x%x\n", c,
++			 V4L2_CTRL_COUNT, ctrl->id);
++		return hdl->error;
++	}
++
++	for (c = 0; c < V4L2_CTRL_COUNT; c++) {
++		ctrl = &v4l2_ctrls[c];
++
++		switch (ctrl->type) {
++		case MMAL_CONTROL_TYPE_CLUSTER:
++			v4l2_ctrl_auto_cluster(ctrl->min,
++					       &dev->ctrls[c+1],
++					       ctrl->max,
++					       ctrl->def);
++			break;
++
++		case MMAL_CONTROL_TYPE_STD:
++		case MMAL_CONTROL_TYPE_STD_MENU:
++		case MMAL_CONTROL_TYPE_INT_MENU:
++			break;
++		}
++
++	}
++
++	return 0;
++}
+diff -Nur linux-3.12.6/drivers/media/platform/bcm2835/Kconfig linux-raspberry-pi/drivers/media/platform/bcm2835/Kconfig
+--- linux-3.12.6/drivers/media/platform/bcm2835/Kconfig	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/media/platform/bcm2835/Kconfig	2013-12-29 10:40:41.000000000 +0100
+@@ -0,0 +1,25 @@
++# Broadcom VideoCore IV v4l2 camera support
++
++config VIDEO_BCM2835
++	bool "Broadcom BCM2835 camera interface driver"
++	depends on VIDEO_V4L2 && ARCH_BCM2708
++	---help---
++	  Say Y here to enable camera host interface devices for
++	  Broadcom BCM2835 SoC. This operates over the VCHIQ interface
++	  to a service running on VideoCore.
++
++
++if VIDEO_BCM2835
++
++config VIDEO_BCM2835_MMAL
++	tristate "Broadcom BM2835 MMAL camera interface driver"
++	depends on BCM2708_VCHIQ
++	select VIDEOBUF2_VMALLOC
++	---help---
++	  This is a V4L2 driver for the Broadcom BCM2835 MMAL camera host interface
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called bcm2835-v4l2.o
++
++
++endif # VIDEO_BM2835
+diff -Nur linux-3.12.6/drivers/media/platform/bcm2835/Makefile linux-raspberry-pi/drivers/media/platform/bcm2835/Makefile
+--- linux-3.12.6/drivers/media/platform/bcm2835/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/media/platform/bcm2835/Makefile	2013-12-29 10:40:41.000000000 +0100
+@@ -0,0 +1,5 @@
++bcm2835-v4l2-objs := bcm2835-camera.o controls.o mmal-vchiq.o
++
++obj-$(CONFIG_VIDEO_BCM2835_MMAL) += bcm2835-v4l2.o
++
++ccflags-$(CONFIG_VIDEO_BCM2835) += -Idrivers/misc/vc04_services -Idrivers/misc/vc04_services/interface/vcos/linuxkernel -D__VCCOREVER__=0x04000000
+diff -Nur linux-3.12.6/drivers/media/platform/bcm2835/mmal-common.h linux-raspberry-pi/drivers/media/platform/bcm2835/mmal-common.h
+--- linux-3.12.6/drivers/media/platform/bcm2835/mmal-common.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/media/platform/bcm2835/mmal-common.h	2013-12-29 10:40:41.000000000 +0100
+@@ -0,0 +1,52 @@
++/*
++ * Broadcom BM2835 V4L2 driver
++ *
++ * Copyright © 2013 Raspberry Pi (Trading) Ltd.
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file COPYING in the main directory of this archive
++ * for more details.
++ *
++ * Authors: Vincent Sanders <vincent.sanders@collabora.co.uk>
++ *          Dave Stevenson <dsteve@broadcom.com>
++ *          Simon Mellor <simellor@broadcom.com>
++ *          Luke Diamand <luked@broadcom.com>
++ *
++ * MMAL structures
++ *
++ */
++
++#define MMAL_FOURCC(a, b, c, d) ((a) | (b << 8) | (c << 16) | (d << 24))
++#define MMAL_MAGIC MMAL_FOURCC('m', 'm', 'a', 'l')
++
++/** Special value signalling that time is not known */
++#define MMAL_TIME_UNKNOWN (1LL<<63)
++
++/* mapping between v4l and mmal video modes */
++struct mmal_fmt {
++	char  *name;
++	u32   fourcc;          /* v4l2 format id */
++	u32   mmal;
++	int   depth;
++	u32   mmal_component;  /* MMAL component index to be used to encode */
++};
++
++/* buffer for one video frame */
++struct mmal_buffer {
++	/* v4l buffer data -- must be first */
++	struct vb2_buffer	vb;
++
++	/* list of buffers available */
++	struct list_head	list;
++
++	void *buffer; /* buffer pointer */
++	unsigned long buffer_size; /* size of allocated buffer */
++};
++
++/* */
++struct mmal_colourfx {
++	s32 enable;
++	u32 u;
++	u32 v;
++};
++
+diff -Nur linux-3.12.6/drivers/media/platform/bcm2835/mmal-encodings.h linux-raspberry-pi/drivers/media/platform/bcm2835/mmal-encodings.h
+--- linux-3.12.6/drivers/media/platform/bcm2835/mmal-encodings.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/media/platform/bcm2835/mmal-encodings.h	2013-12-29 10:40:41.000000000 +0100
+@@ -0,0 +1,93 @@
++/*
++ * Broadcom BM2835 V4L2 driver
++ *
++ * Copyright © 2013 Raspberry Pi (Trading) Ltd.
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file COPYING in the main directory of this archive
++ * for more details.
++ *
++ * Authors: Vincent Sanders <vincent.sanders@collabora.co.uk>
++ *          Dave Stevenson <dsteve@broadcom.com>
++ *          Simon Mellor <simellor@broadcom.com>
++ *          Luke Diamand <luked@broadcom.com>
++ */
++
++#define MMAL_ENCODING_H264             MMAL_FOURCC('H', '2', '6', '4')
++#define MMAL_ENCODING_H263             MMAL_FOURCC('H', '2', '6', '3')
++#define MMAL_ENCODING_MP4V             MMAL_FOURCC('M', 'P', '4', 'V')
++#define MMAL_ENCODING_MP2V             MMAL_FOURCC('M', 'P', '2', 'V')
++#define MMAL_ENCODING_MP1V             MMAL_FOURCC('M', 'P', '1', 'V')
++#define MMAL_ENCODING_WMV3             MMAL_FOURCC('W', 'M', 'V', '3')
++#define MMAL_ENCODING_WMV2             MMAL_FOURCC('W', 'M', 'V', '2')
++#define MMAL_ENCODING_WMV1             MMAL_FOURCC('W', 'M', 'V', '1')
++#define MMAL_ENCODING_WVC1             MMAL_FOURCC('W', 'V', 'C', '1')
++#define MMAL_ENCODING_VP8              MMAL_FOURCC('V', 'P', '8', ' ')
++#define MMAL_ENCODING_VP7              MMAL_FOURCC('V', 'P', '7', ' ')
++#define MMAL_ENCODING_VP6              MMAL_FOURCC('V', 'P', '6', ' ')
++#define MMAL_ENCODING_THEORA           MMAL_FOURCC('T', 'H', 'E', 'O')
++#define MMAL_ENCODING_SPARK            MMAL_FOURCC('S', 'P', 'R', 'K')
++
++#define MMAL_ENCODING_JPEG             MMAL_FOURCC('J', 'P', 'E', 'G')
++#define MMAL_ENCODING_GIF              MMAL_FOURCC('G', 'I', 'F', ' ')
++#define MMAL_ENCODING_PNG              MMAL_FOURCC('P', 'N', 'G', ' ')
++#define MMAL_ENCODING_PPM              MMAL_FOURCC('P', 'P', 'M', ' ')
++#define MMAL_ENCODING_TGA              MMAL_FOURCC('T', 'G', 'A', ' ')
++#define MMAL_ENCODING_BMP              MMAL_FOURCC('B', 'M', 'P', ' ')
++
++#define MMAL_ENCODING_I420             MMAL_FOURCC('I', '4', '2', '0')
++#define MMAL_ENCODING_I420_SLICE       MMAL_FOURCC('S', '4', '2', '0')
++#define MMAL_ENCODING_YV12             MMAL_FOURCC('Y', 'V', '1', '2')
++#define MMAL_ENCODING_I422             MMAL_FOURCC('I', '4', '2', '2')
++#define MMAL_ENCODING_I422_SLICE       MMAL_FOURCC('S', '4', '2', '2')
++#define MMAL_ENCODING_YUYV             MMAL_FOURCC('Y', 'U', 'Y', 'V')
++#define MMAL_ENCODING_YVYU             MMAL_FOURCC('Y', 'V', 'Y', 'U')
++#define MMAL_ENCODING_UYVY             MMAL_FOURCC('U', 'Y', 'V', 'Y')
++#define MMAL_ENCODING_VYUY             MMAL_FOURCC('V', 'Y', 'U', 'Y')
++#define MMAL_ENCODING_NV12             MMAL_FOURCC('N', 'V', '1', '2')
++#define MMAL_ENCODING_NV21             MMAL_FOURCC('N', 'V', '2', '1')
++#define MMAL_ENCODING_ARGB             MMAL_FOURCC('A', 'R', 'G', 'B')
++#define MMAL_ENCODING_RGBA             MMAL_FOURCC('R', 'G', 'B', 'A')
++#define MMAL_ENCODING_ABGR             MMAL_FOURCC('A', 'B', 'G', 'R')
++#define MMAL_ENCODING_BGRA             MMAL_FOURCC('B', 'G', 'R', 'A')
++#define MMAL_ENCODING_RGB16            MMAL_FOURCC('R', 'G', 'B', '2')
++#define MMAL_ENCODING_RGB24            MMAL_FOURCC('R', 'G', 'B', '3')
++#define MMAL_ENCODING_RGB32            MMAL_FOURCC('R', 'G', 'B', '4')
++#define MMAL_ENCODING_BGR16            MMAL_FOURCC('B', 'G', 'R', '2')
++#define MMAL_ENCODING_BGR24            MMAL_FOURCC('B', 'G', 'R', '3')
++#define MMAL_ENCODING_BGR32            MMAL_FOURCC('B', 'G', 'R', '4')
++
++/** SAND Video (YUVUV128) format, native format understood by VideoCore.
++ * This format is *not* opaque - if requested you will receive full frames
++ * of YUV_UV video.
++ */
++#define MMAL_ENCODING_YUVUV128         MMAL_FOURCC('S', 'A', 'N', 'D')
++
++/** VideoCore opaque image format, image handles are returned to
++ * the host but not the actual image data.
++ */
++#define MMAL_ENCODING_OPAQUE           MMAL_FOURCC('O', 'P', 'Q', 'V')
++
++/** An EGL image handle
++ */
++#define MMAL_ENCODING_EGL_IMAGE        MMAL_FOURCC('E', 'G', 'L', 'I')
++
++/* }@ */
++
++/** \name Pre-defined audio encodings */
++/* @{ */
++#define MMAL_ENCODING_PCM_UNSIGNED_BE  MMAL_FOURCC('P', 'C', 'M', 'U')
++#define MMAL_ENCODING_PCM_UNSIGNED_LE  MMAL_FOURCC('p', 'c', 'm', 'u')
++#define MMAL_ENCODING_PCM_SIGNED_BE    MMAL_FOURCC('P', 'C', 'M', 'S')
++#define MMAL_ENCODING_PCM_SIGNED_LE    MMAL_FOURCC('p', 'c', 'm', 's')
++#define MMAL_ENCODING_PCM_FLOAT_BE     MMAL_FOURCC('P', 'C', 'M', 'F')
++#define MMAL_ENCODING_PCM_FLOAT_LE     MMAL_FOURCC('p', 'c', 'm', 'f')
++
++/* Pre-defined H264 encoding variants */
++
++/** ISO 14496-10 Annex B byte stream format */
++#define MMAL_ENCODING_VARIANT_H264_DEFAULT   0
++/** ISO 14496-15 AVC stream format */
++#define MMAL_ENCODING_VARIANT_H264_AVC1      MMAL_FOURCC('A', 'V', 'C', '1')
++/** Implicitly delineated NAL units without emulation prevention */
++#define MMAL_ENCODING_VARIANT_H264_RAW       MMAL_FOURCC('R', 'A', 'W', ' ')
+diff -Nur linux-3.12.6/drivers/media/platform/bcm2835/mmal-msg-common.h linux-raspberry-pi/drivers/media/platform/bcm2835/mmal-msg-common.h
+--- linux-3.12.6/drivers/media/platform/bcm2835/mmal-msg-common.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/media/platform/bcm2835/mmal-msg-common.h	2013-12-29 10:40:41.000000000 +0100
+@@ -0,0 +1,50 @@
++/*
++ * Broadcom BM2835 V4L2 driver
++ *
++ * Copyright © 2013 Raspberry Pi (Trading) Ltd.
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file COPYING in the main directory of this archive
++ * for more details.
++ *
++ * Authors: Vincent Sanders <vincent.sanders@collabora.co.uk>
++ *          Dave Stevenson <dsteve@broadcom.com>
++ *          Simon Mellor <simellor@broadcom.com>
++ *          Luke Diamand <luked@broadcom.com>
++ */
++
++#ifndef MMAL_MSG_COMMON_H
++#define MMAL_MSG_COMMON_H
++
++enum mmal_msg_status {
++	MMAL_MSG_STATUS_SUCCESS = 0, /**< Success */
++	MMAL_MSG_STATUS_ENOMEM,      /**< Out of memory */
++	MMAL_MSG_STATUS_ENOSPC,      /**< Out of resources other than memory */
++	MMAL_MSG_STATUS_EINVAL,      /**< Argument is invalid */
++	MMAL_MSG_STATUS_ENOSYS,      /**< Function not implemented */
++	MMAL_MSG_STATUS_ENOENT,      /**< No such file or directory */
++	MMAL_MSG_STATUS_ENXIO,       /**< No such device or address */
++	MMAL_MSG_STATUS_EIO,         /**< I/O error */
++	MMAL_MSG_STATUS_ESPIPE,      /**< Illegal seek */
++	MMAL_MSG_STATUS_ECORRUPT,    /**< Data is corrupt \attention */
++	MMAL_MSG_STATUS_ENOTREADY,   /**< Component is not ready */
++	MMAL_MSG_STATUS_ECONFIG,     /**< Component is not configured */
++	MMAL_MSG_STATUS_EISCONN,     /**< Port is already connected */
++	MMAL_MSG_STATUS_ENOTCONN,    /**< Port is disconnected */
++	MMAL_MSG_STATUS_EAGAIN,      /**< Resource temporarily unavailable. */
++	MMAL_MSG_STATUS_EFAULT,      /**< Bad address */
++};
++
++struct mmal_rect {
++	s32 x;      /**< x coordinate (from left) */
++	s32 y;      /**< y coordinate (from top) */
++	s32 width;  /**< width */
++	s32 height; /**< height */
++};
++
++struct mmal_rational {
++	s32 num;    /**< Numerator */
++	s32 den;    /**< Denominator */
++};
++
++#endif /* MMAL_MSG_COMMON_H */
+diff -Nur linux-3.12.6/drivers/media/platform/bcm2835/mmal-msg-format.h linux-raspberry-pi/drivers/media/platform/bcm2835/mmal-msg-format.h
+--- linux-3.12.6/drivers/media/platform/bcm2835/mmal-msg-format.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/media/platform/bcm2835/mmal-msg-format.h	2013-12-29 10:40:41.000000000 +0100
+@@ -0,0 +1,81 @@
++/*
++ * Broadcom BM2835 V4L2 driver
++ *
++ * Copyright © 2013 Raspberry Pi (Trading) Ltd.
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file COPYING in the main directory of this archive
++ * for more details.
++ *
++ * Authors: Vincent Sanders <vincent.sanders@collabora.co.uk>
++ *          Dave Stevenson <dsteve@broadcom.com>
++ *          Simon Mellor <simellor@broadcom.com>
++ *          Luke Diamand <luked@broadcom.com>
++ */
++
++#ifndef MMAL_MSG_FORMAT_H
++#define MMAL_MSG_FORMAT_H
++
++#include "mmal-msg-common.h"
++
++/* MMAL_ES_FORMAT_T */
++
++
++struct mmal_audio_format {
++	u32 channels;           /**< Number of audio channels */
++	u32 sample_rate;        /**< Sample rate */
++
++	u32 bits_per_sample;    /**< Bits per sample */
++	u32 block_align;        /**< Size of a block of data */
++};
++
++struct mmal_video_format {
++	u32 width;        /**< Width of frame in pixels */
++	u32 height;       /**< Height of frame in rows of pixels */
++	struct mmal_rect crop;         /**< Visible region of the frame */
++	struct mmal_rational frame_rate;   /**< Frame rate */
++	struct mmal_rational par;          /**< Pixel aspect ratio */
++
++	/* FourCC specifying the color space of the video stream. See the
++	 * \ref MmalColorSpace "pre-defined color spaces" for some examples.
++	 */
++	u32 color_space;
++};
++
++struct mmal_subpicture_format {
++	u32 x_offset;
++	u32 y_offset;
++};
++
++union mmal_es_specific_format {
++	struct mmal_audio_format audio;
++	struct mmal_video_format video;
++	struct mmal_subpicture_format subpicture;
++};
++
++/** Definition of an elementary stream format (MMAL_ES_FORMAT_T) */
++struct mmal_es_format {
++	u32 type;      /* enum mmal_es_type */
++
++	u32 encoding;  /* FourCC specifying encoding of the elementary stream.*/
++	u32 encoding_variant; /* FourCC specifying the specific
++			       * encoding variant of the elementary
++			       * stream.
++			       */
++
++	union mmal_es_specific_format *es; /* TODO: pointers in
++					    * message serialisation?!?
++					    */
++					    /* Type specific
++					     * information for the
++					     * elementary stream
++					     */
++
++	u32 bitrate;        /**< Bitrate in bits per second */
++	u32 flags; /**< Flags describing properties of the elementary stream. */
++
++	u32 extradata_size;       /**< Size of the codec specific data */
++	u8  *extradata;           /**< Codec specific data */
++};
++
++#endif /* MMAL_MSG_FORMAT_H */
+diff -Nur linux-3.12.6/drivers/media/platform/bcm2835/mmal-msg.h linux-raspberry-pi/drivers/media/platform/bcm2835/mmal-msg.h
+--- linux-3.12.6/drivers/media/platform/bcm2835/mmal-msg.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/media/platform/bcm2835/mmal-msg.h	2013-12-29 10:40:41.000000000 +0100
+@@ -0,0 +1,404 @@
++/*
++ * Broadcom BM2835 V4L2 driver
++ *
++ * Copyright © 2013 Raspberry Pi (Trading) Ltd.
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file COPYING in the main directory of this archive
++ * for more details.
++ *
++ * Authors: Vincent Sanders <vincent.sanders@collabora.co.uk>
++ *          Dave Stevenson <dsteve@broadcom.com>
++ *          Simon Mellor <simellor@broadcom.com>
++ *          Luke Diamand <luked@broadcom.com>
++ */
++
++/* all the data structures which serialise the MMAL protocol. note
++ * these are directly mapped onto the recived message data.
++ *
++ * BEWARE: They seem to *assume* pointers are u32 and that there is no
++ * structure padding!
++ *
++ * NOTE: this implementation uses kernel types to ensure sizes. Rather
++ * than assigning values to enums to force their size the
++ * implementation uses fixed size types and not the enums (though the
++ * comments have the actual enum type
++ */
++
++#define VC_MMAL_VER 15
++#define VC_MMAL_MIN_VER 10
++#define VC_MMAL_SERVER_NAME  MAKE_FOURCC("mmal")
++
++/* max total message size is 512 bytes */
++#define MMAL_MSG_MAX_SIZE 512
++/* with six 32bit header elements max payload is therefore 488 bytes */
++#define MMAL_MSG_MAX_PAYLOAD 488
++
++#include "mmal-msg-common.h"
++#include "mmal-msg-format.h"
++#include "mmal-msg-port.h"
++
++enum mmal_msg_type {
++	MMAL_MSG_TYPE_QUIT = 1,
++	MMAL_MSG_TYPE_SERVICE_CLOSED,
++	MMAL_MSG_TYPE_GET_VERSION,
++	MMAL_MSG_TYPE_COMPONENT_CREATE,
++	MMAL_MSG_TYPE_COMPONENT_DESTROY, /* 5 */
++	MMAL_MSG_TYPE_COMPONENT_ENABLE,
++	MMAL_MSG_TYPE_COMPONENT_DISABLE,
++	MMAL_MSG_TYPE_PORT_INFO_GET,
++	MMAL_MSG_TYPE_PORT_INFO_SET,
++	MMAL_MSG_TYPE_PORT_ACTION, /* 10 */
++	MMAL_MSG_TYPE_BUFFER_FROM_HOST,
++	MMAL_MSG_TYPE_BUFFER_TO_HOST,
++	MMAL_MSG_TYPE_GET_STATS,
++	MMAL_MSG_TYPE_PORT_PARAMETER_SET,
++	MMAL_MSG_TYPE_PORT_PARAMETER_GET, /* 15 */
++	MMAL_MSG_TYPE_EVENT_TO_HOST,
++	MMAL_MSG_TYPE_GET_CORE_STATS_FOR_PORT,
++	MMAL_MSG_TYPE_OPAQUE_ALLOCATOR,
++	MMAL_MSG_TYPE_CONSUME_MEM,
++	MMAL_MSG_TYPE_LMK, /* 20 */
++	MMAL_MSG_TYPE_OPAQUE_ALLOCATOR_DESC,
++	MMAL_MSG_TYPE_DRM_GET_LHS32,
++	MMAL_MSG_TYPE_DRM_GET_TIME,
++	MMAL_MSG_TYPE_BUFFER_FROM_HOST_ZEROLEN,
++	MMAL_MSG_TYPE_PORT_FLUSH, /* 25 */
++	MMAL_MSG_TYPE_HOST_LOG,
++	MMAL_MSG_TYPE_MSG_LAST
++};
++
++/* port action request messages differ depending on the action type */
++enum mmal_msg_port_action_type {
++	MMAL_MSG_PORT_ACTION_TYPE_UNKNOWN = 0,      /* Unkown action */
++	MMAL_MSG_PORT_ACTION_TYPE_ENABLE,           /* Enable a port */
++	MMAL_MSG_PORT_ACTION_TYPE_DISABLE,          /* Disable a port */
++	MMAL_MSG_PORT_ACTION_TYPE_FLUSH,            /* Flush a port */
++	MMAL_MSG_PORT_ACTION_TYPE_CONNECT,          /* Connect ports */
++	MMAL_MSG_PORT_ACTION_TYPE_DISCONNECT,       /* Disconnect ports */
++	MMAL_MSG_PORT_ACTION_TYPE_SET_REQUIREMENTS, /* Set buffer requirements*/
++};
++
++struct mmal_msg_header {
++	u32 magic;
++	u32 type; /** enum mmal_msg_type */
++
++	/* Opaque handle to the control service */
++	struct mmal_control_service *control_service;
++
++	struct mmal_msg_context *context; /** a u32 per message context */
++	u32 status; /** The status of the vchiq operation */
++	u32 padding;
++};
++
++/* Send from VC to host to report version */
++struct mmal_msg_version {
++	u32 flags;
++	u32 major;
++	u32 minor;
++	u32 minimum;
++};
++
++/* request to VC to create component */
++struct mmal_msg_component_create {
++	void *client_component; /* component context */
++	char name[128];
++	u32 pid;                /* For debug */
++};
++
++/* reply from VC to component creation request */
++struct mmal_msg_component_create_reply {
++	u32 status; /** enum mmal_msg_status - how does this differ to
++		     * the one in the header?
++		     */
++	u32 component_handle; /* VideoCore handle for component */
++	u32 input_num;        /* Number of input ports */
++	u32 output_num;       /* Number of output ports */
++	u32 clock_num;        /* Number of clock ports */
++};
++
++/* request to VC to destroy a component */
++struct mmal_msg_component_destroy {
++	u32 component_handle;
++};
++
++struct mmal_msg_component_destroy_reply {
++	u32 status; /** The component destruction status */
++};
++
++
++/* request and reply to VC to enable a component */
++struct mmal_msg_component_enable {
++	u32 component_handle;
++};
++
++struct mmal_msg_component_enable_reply {
++	u32 status; /** The component enable status */
++};
++
++
++/* request and reply to VC to disable a component */
++struct mmal_msg_component_disable {
++	u32 component_handle;
++};
++
++struct mmal_msg_component_disable_reply {
++	u32 status; /** The component disable status */
++};
++
++/* request to VC to get port information */
++struct mmal_msg_port_info_get {
++	u32 component_handle;  /* component handle port is associated with */
++	u32 port_type;         /* enum mmal_msg_port_type */
++	u32 index;             /* port index to query */
++};
++
++/* reply from VC to get port info request */
++struct mmal_msg_port_info_get_reply {
++	u32 status; /** enum mmal_msg_status */
++	u32 component_handle;  /* component handle port is associated with */
++	u32 port_type;         /* enum mmal_msg_port_type */
++	u32 port_index;        /* port indexed in query */
++	s32 found;             /* unused */
++	u32 port_handle;               /**< Handle to use for this port */
++	struct mmal_port port;
++	struct mmal_es_format format; /* elementry stream format */
++	union mmal_es_specific_format es; /* es type specific data */
++	u8 extradata[MMAL_FORMAT_EXTRADATA_MAX_SIZE]; /* es extra data */
++};
++
++/* request to VC to set port information */
++struct mmal_msg_port_info_set {
++	u32 component_handle;
++	u32 port_type;         /* enum mmal_msg_port_type */
++	u32 port_index;           /* port indexed in query */
++	struct mmal_port port;
++	struct mmal_es_format format;
++	union mmal_es_specific_format es;
++	u8 extradata[MMAL_FORMAT_EXTRADATA_MAX_SIZE];
++};
++
++/* reply from VC to port info set request */
++struct mmal_msg_port_info_set_reply {
++	u32 status;
++	u32 component_handle;  /* component handle port is associated with */
++	u32 port_type;         /* enum mmal_msg_port_type */
++	u32 index;             /* port indexed in query */
++	s32 found;             /* unused */
++	u32 port_handle;               /**< Handle to use for this port */
++	struct mmal_port port;
++	struct mmal_es_format format;
++	union mmal_es_specific_format es;
++	u8 extradata[MMAL_FORMAT_EXTRADATA_MAX_SIZE];
++};
++
++
++/* port action requests that take a mmal_port as a parameter */
++struct mmal_msg_port_action_port {
++	u32 component_handle;
++	u32 port_handle;
++	u32 action; /* enum mmal_msg_port_action_type */
++	struct mmal_port port;
++};
++
++/* port action requests that take handles as a parameter */
++struct mmal_msg_port_action_handle {
++	u32 component_handle;
++	u32 port_handle;
++	u32 action; /* enum mmal_msg_port_action_type */
++	u32 connect_component_handle;
++	u32 connect_port_handle;
++};
++
++struct mmal_msg_port_action_reply {
++	u32 status; /** The port action operation status */
++};
++
++
++
++
++/* MMAL buffer transfer */
++
++/** Size of space reserved in a buffer message for short messages. */
++#define MMAL_VC_SHORT_DATA 128
++
++/** Signals that the current payload is the end of the stream of data */
++#define MMAL_BUFFER_HEADER_FLAG_EOS                    (1<<0)
++/** Signals that the start of the current payload starts a frame */
++#define MMAL_BUFFER_HEADER_FLAG_FRAME_START            (1<<1)
++/** Signals that the end of the current payload ends a frame */
++#define MMAL_BUFFER_HEADER_FLAG_FRAME_END              (1<<2)
++/** Signals that the current payload contains only complete frames (>1) */
++#define MMAL_BUFFER_HEADER_FLAG_FRAME                  \
++	(MMAL_BUFFER_HEADER_FLAG_FRAME_START|MMAL_BUFFER_HEADER_FLAG_FRAME_END)
++/** Signals that the current payload is a keyframe (i.e. self decodable) */
++#define MMAL_BUFFER_HEADER_FLAG_KEYFRAME               (1<<3)
++/** Signals a discontinuity in the stream of data (e.g. after a seek).
++ * Can be used for instance by a decoder to reset its state */
++#define MMAL_BUFFER_HEADER_FLAG_DISCONTINUITY          (1<<4)
++/** Signals a buffer containing some kind of config data for the component
++ * (e.g. codec config data) */
++#define MMAL_BUFFER_HEADER_FLAG_CONFIG                 (1<<5)
++/** Signals an encrypted payload */
++#define MMAL_BUFFER_HEADER_FLAG_ENCRYPTED              (1<<6)
++/** Signals a buffer containing side information */
++#define MMAL_BUFFER_HEADER_FLAG_CODECSIDEINFO          (1<<7)
++/** Signals a buffer which is the snapshot/postview image from a stills
++ * capture
++ */
++#define MMAL_BUFFER_HEADER_FLAGS_SNAPSHOT              (1<<8)
++/** Signals a buffer which contains data known to be corrupted */
++#define MMAL_BUFFER_HEADER_FLAG_CORRUPTED              (1<<9)
++/** Signals that a buffer failed to be transmitted */
++#define MMAL_BUFFER_HEADER_FLAG_TRANSMISSION_FAILED    (1<<10)
++
++struct mmal_driver_buffer {
++	u32 magic;
++	u32 component_handle;
++	u32 port_handle;
++	void *client_context;
++};
++
++/* buffer header */
++struct mmal_buffer_header {
++	struct mmal_buffer_header *next; /* next header */
++	void *priv; /* framework private data */
++	u32 cmd;
++	void *data;
++	u32 alloc_size;
++	u32 length;
++	u32 offset;
++	u32 flags;
++	s64 pts;
++	s64 dts;
++	void *type;
++	void *user_data;
++};
++
++struct mmal_buffer_header_type_specific {
++	union {
++		struct {
++		u32 planes;
++		u32 offset[4];
++		u32 pitch[4];
++		u32 flags;
++		} video;
++	} u;
++};
++
++struct mmal_msg_buffer_from_host {
++	/* The front 32 bytes of the buffer header are copied
++	 * back to us in the reply to allow for context. This
++	 * area is used to store two mmal_driver_buffer structures to
++	 * allow for multiple concurrent service users.
++	 */
++	/* control data */
++	struct mmal_driver_buffer drvbuf;
++
++	/* referenced control data for passthrough buffer management */
++	struct mmal_driver_buffer drvbuf_ref;
++	struct mmal_buffer_header buffer_header; /* buffer header itself */
++	struct mmal_buffer_header_type_specific buffer_header_type_specific;
++	s32 is_zero_copy;
++	s32 has_reference;
++
++	/** allows short data to be xfered in control message */
++	u32 payload_in_message;
++	u8 short_data[MMAL_VC_SHORT_DATA];
++};
++
++
++/* port parameter setting */
++
++#define MMAL_WORKER_PORT_PARAMETER_SPACE      96
++
++struct mmal_msg_port_parameter_set {
++	u32 component_handle; /* component */
++	u32 port_handle;      /* port */
++	u32 id;     /* Parameter ID  */
++	u32 size;      /* Parameter size */
++	uint32_t value[MMAL_WORKER_PORT_PARAMETER_SPACE];
++};
++
++struct mmal_msg_port_parameter_set_reply {
++	u32 status; /** enum mmal_msg_status todo: how does this
++		     * differ to the one in the header?
++		     */
++};
++
++/* port parameter getting */
++
++struct mmal_msg_port_parameter_get {
++	u32 component_handle; /* component */
++	u32 port_handle;      /* port */
++	u32 id;     /* Parameter ID  */
++	u32 size;      /* Parameter size */
++};
++
++struct mmal_msg_port_parameter_get_reply {
++	u32 status;           /* Status of mmal_port_parameter_get call */
++	u32 id;     /* Parameter ID  */
++	u32 size;      /* Parameter size */
++	uint32_t value[MMAL_WORKER_PORT_PARAMETER_SPACE];
++};
++
++/* event messages */
++#define MMAL_WORKER_EVENT_SPACE 256
++
++struct mmal_msg_event_to_host {
++	void *client_component; /* component context */
++
++	u32 port_type;
++	u32 port_num;
++
++	u32 cmd;
++	u32 length;
++	u8 data[MMAL_WORKER_EVENT_SPACE];
++	struct mmal_buffer_header *delayed_buffer;
++};
++
++/* all mmal messages are serialised through this structure */
++struct mmal_msg {
++	/* header */
++	struct mmal_msg_header h;
++	/* payload */
++	union {
++		struct mmal_msg_version version;
++
++		struct mmal_msg_component_create component_create;
++		struct mmal_msg_component_create_reply component_create_reply;
++
++		struct mmal_msg_component_destroy component_destroy;
++		struct mmal_msg_component_destroy_reply component_destroy_reply;
++
++		struct mmal_msg_component_enable component_enable;
++		struct mmal_msg_component_enable_reply component_enable_reply;
++
++		struct mmal_msg_component_disable component_disable;
++		struct mmal_msg_component_disable_reply component_disable_reply;
++
++		struct mmal_msg_port_info_get port_info_get;
++		struct mmal_msg_port_info_get_reply port_info_get_reply;
++
++		struct mmal_msg_port_info_set port_info_set;
++		struct mmal_msg_port_info_set_reply port_info_set_reply;
++
++		struct mmal_msg_port_action_port port_action_port;
++		struct mmal_msg_port_action_handle port_action_handle;
++		struct mmal_msg_port_action_reply port_action_reply;
++
++		struct mmal_msg_buffer_from_host buffer_from_host;
++
++		struct mmal_msg_port_parameter_set port_parameter_set;
++		struct mmal_msg_port_parameter_set_reply
++			port_parameter_set_reply;
++		struct mmal_msg_port_parameter_get
++			port_parameter_get;
++		struct mmal_msg_port_parameter_get_reply
++			port_parameter_get_reply;
++
++		struct mmal_msg_event_to_host event_to_host;
++
++		u8 payload[MMAL_MSG_MAX_PAYLOAD];
++	} u;
++};
+diff -Nur linux-3.12.6/drivers/media/platform/bcm2835/mmal-msg-port.h linux-raspberry-pi/drivers/media/platform/bcm2835/mmal-msg-port.h
+--- linux-3.12.6/drivers/media/platform/bcm2835/mmal-msg-port.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/media/platform/bcm2835/mmal-msg-port.h	2013-12-29 10:40:41.000000000 +0100
+@@ -0,0 +1,107 @@
++/*
++ * Broadcom BM2835 V4L2 driver
++ *
++ * Copyright © 2013 Raspberry Pi (Trading) Ltd.
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file COPYING in the main directory of this archive
++ * for more details.
++ *
++ * Authors: Vincent Sanders <vincent.sanders@collabora.co.uk>
++ *          Dave Stevenson <dsteve@broadcom.com>
++ *          Simon Mellor <simellor@broadcom.com>
++ *          Luke Diamand <luked@broadcom.com>
++ */
++
++/* MMAL_PORT_TYPE_T */
++enum mmal_port_type {
++	MMAL_PORT_TYPE_UNKNOWN = 0,  /**< Unknown port type */
++	MMAL_PORT_TYPE_CONTROL,      /**< Control port */
++	MMAL_PORT_TYPE_INPUT,        /**< Input port */
++	MMAL_PORT_TYPE_OUTPUT,       /**< Output port */
++	MMAL_PORT_TYPE_CLOCK,        /**< Clock port */
++};
++
++/** The port is pass-through and doesn't need buffer headers allocated */
++#define MMAL_PORT_CAPABILITY_PASSTHROUGH                       0x01
++/** The port wants to allocate the buffer payloads.
++ * This signals a preference that payload allocation should be done
++ * on this port for efficiency reasons. */
++#define MMAL_PORT_CAPABILITY_ALLOCATION                        0x02
++/** The port supports format change events.
++ * This applies to input ports and is used to let the client know
++ * whether the port supports being reconfigured via a format
++ * change event (i.e. without having to disable the port). */
++#define MMAL_PORT_CAPABILITY_SUPPORTS_EVENT_FORMAT_CHANGE      0x04
++
++/* mmal port structure (MMAL_PORT_T)
++ *
++ * most elements are informational only, the pointer values for
++ * interogation messages are generally provided as additional
++ * strucures within the message. When used to set values only teh
++ * buffer_num, buffer_size and userdata parameters are writable.
++ */
++struct mmal_port {
++	void *priv; /* Private member used by the framework */
++	const char *name; /* Port name. Used for debugging purposes (RO) */
++
++	u32 type;      /* Type of the port (RO) enum mmal_port_type */
++	u16 index;     /* Index of the port in its type list (RO) */
++	u16 index_all; /* Index of the port in the list of all ports (RO) */
++
++	u32 is_enabled; /* Indicates whether the port is enabled or not (RO) */
++	struct mmal_es_format *format; /* Format of the elementary stream */
++
++	u32 buffer_num_min; /* Minimum number of buffers the port
++			     *   requires (RO).  This is set by the
++			     *   component.
++			     */
++
++	u32 buffer_size_min; /* Minimum size of buffers the port
++			      * requires (RO).  This is set by the
++			      * component.
++			      */
++
++	u32 buffer_alignment_min; /* Minimum alignment requirement for
++				   * the buffers (RO).  A value of
++				   * zero means no special alignment
++				   * requirements.  This is set by the
++				   * component.
++				   */
++
++	u32 buffer_num_recommended;  /* Number of buffers the port
++				      * recommends for optimal
++				      * performance (RO).  A value of
++				      * zero means no special
++				      * recommendation.  This is set
++				      * by the component.
++				      */
++
++	u32 buffer_size_recommended; /* Size of buffers the port
++				      * recommends for optimal
++				      * performance (RO).  A value of
++				      * zero means no special
++				      * recommendation.  This is set
++				      * by the component.
++				      */
++
++	u32 buffer_num; /* Actual number of buffers the port will use.
++			 * This is set by the client.
++			 */
++
++	u32 buffer_size; /* Actual maximum size of the buffers that
++			  * will be sent to the port. This is set by
++			  * the client.
++			  */
++
++	void *component; /* Component this port belongs to (Read Only) */
++
++	void *userdata; /* Field reserved for use by the client */
++
++	u32 capabilities; /* Flags describing the capabilities of a
++			   * port (RO).  Bitwise combination of \ref
++			   * portcapabilities "Port capabilities"
++			   * values.
++			   */
++
++};
+diff -Nur linux-3.12.6/drivers/media/platform/bcm2835/mmal-parameters.h linux-raspberry-pi/drivers/media/platform/bcm2835/mmal-parameters.h
+--- linux-3.12.6/drivers/media/platform/bcm2835/mmal-parameters.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/media/platform/bcm2835/mmal-parameters.h	2013-12-29 10:40:41.000000000 +0100
+@@ -0,0 +1,562 @@
++/*
++ * Broadcom BM2835 V4L2 driver
++ *
++ * Copyright © 2013 Raspberry Pi (Trading) Ltd.
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file COPYING in the main directory of this archive
++ * for more details.
++ *
++ * Authors: Vincent Sanders <vincent.sanders@collabora.co.uk>
++ *          Dave Stevenson <dsteve@broadcom.com>
++ *          Simon Mellor <simellor@broadcom.com>
++ *          Luke Diamand <luked@broadcom.com>
++ */
++
++/* common parameters */
++
++/** @name Parameter groups
++ * Parameters are divided into groups, and then allocated sequentially within
++ * a group using an enum.
++ * @{
++ */
++
++/** Common parameter ID group, used with many types of component. */
++#define MMAL_PARAMETER_GROUP_COMMON            (0<<16)
++/** Camera-specific parameter ID group. */
++#define MMAL_PARAMETER_GROUP_CAMERA            (1<<16)
++/** Video-specific parameter ID group. */
++#define MMAL_PARAMETER_GROUP_VIDEO             (2<<16)
++/** Audio-specific parameter ID group. */
++#define MMAL_PARAMETER_GROUP_AUDIO             (3<<16)
++/** Clock-specific parameter ID group. */
++#define MMAL_PARAMETER_GROUP_CLOCK             (4<<16)
++/** Miracast-specific parameter ID group. */
++#define MMAL_PARAMETER_GROUP_MIRACAST       (5<<16)
++
++/* Common parameters */
++enum mmal_parameter_common_type {
++	MMAL_PARAMETER_UNUSED  /**< Never a valid parameter ID */
++		= MMAL_PARAMETER_GROUP_COMMON,
++	MMAL_PARAMETER_SUPPORTED_ENCODINGS, /**< MMAL_PARAMETER_ENCODING_T */
++	MMAL_PARAMETER_URI, /**< MMAL_PARAMETER_URI_T */
++
++	/** MMAL_PARAMETER_CHANGE_EVENT_REQUEST_T */
++	MMAL_PARAMETER_CHANGE_EVENT_REQUEST,
++
++	/** MMAL_PARAMETER_BOOLEAN_T */
++	MMAL_PARAMETER_ZERO_COPY,
++
++	/**< MMAL_PARAMETER_BUFFER_REQUIREMENTS_T */
++	MMAL_PARAMETER_BUFFER_REQUIREMENTS,
++
++	MMAL_PARAMETER_STATISTICS, /**< MMAL_PARAMETER_STATISTICS_T */
++	MMAL_PARAMETER_CORE_STATISTICS, /**< MMAL_PARAMETER_CORE_STATISTICS_T */
++	MMAL_PARAMETER_MEM_USAGE, /**< MMAL_PARAMETER_MEM_USAGE_T */
++	MMAL_PARAMETER_BUFFER_FLAG_FILTER, /**< MMAL_PARAMETER_UINT32_T */
++	MMAL_PARAMETER_SEEK, /**< MMAL_PARAMETER_SEEK_T */
++	MMAL_PARAMETER_POWERMON_ENABLE, /**< MMAL_PARAMETER_BOOLEAN_T */
++	MMAL_PARAMETER_LOGGING, /**< MMAL_PARAMETER_LOGGING_T */
++	MMAL_PARAMETER_SYSTEM_TIME /**< MMAL_PARAMETER_UINT64_T */
++};
++
++/* camera parameters */
++
++enum mmal_parameter_camera_type {
++	/* 0 */
++	/** @ref MMAL_PARAMETER_THUMBNAIL_CONFIG_T */
++	MMAL_PARAMETER_THUMBNAIL_CONFIGURATION
++		= MMAL_PARAMETER_GROUP_CAMERA,
++	MMAL_PARAMETER_CAPTURE_QUALITY, /**< Unused? */
++	MMAL_PARAMETER_ROTATION, /**< @ref MMAL_PARAMETER_INT32_T */
++	MMAL_PARAMETER_EXIF_DISABLE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */
++	MMAL_PARAMETER_EXIF, /**< @ref MMAL_PARAMETER_EXIF_T */
++	MMAL_PARAMETER_AWB_MODE, /**< @ref MMAL_PARAM_AWBMODE_T */
++	MMAL_PARAMETER_IMAGE_EFFECT, /**< @ref MMAL_PARAMETER_IMAGEFX_T */
++	MMAL_PARAMETER_COLOUR_EFFECT, /**< @ref MMAL_PARAMETER_COLOURFX_T */
++	MMAL_PARAMETER_FLICKER_AVOID, /**< @ref MMAL_PARAMETER_FLICKERAVOID_T */
++	MMAL_PARAMETER_FLASH, /**< @ref MMAL_PARAMETER_FLASH_T */
++	MMAL_PARAMETER_REDEYE, /**< @ref MMAL_PARAMETER_REDEYE_T */
++	MMAL_PARAMETER_FOCUS, /**< @ref MMAL_PARAMETER_FOCUS_T */
++	MMAL_PARAMETER_FOCAL_LENGTHS, /**< Unused? */
++	MMAL_PARAMETER_EXPOSURE_COMP, /**< @ref MMAL_PARAMETER_INT32_T */
++	MMAL_PARAMETER_ZOOM, /**< @ref MMAL_PARAMETER_SCALEFACTOR_T */
++	MMAL_PARAMETER_MIRROR, /**< @ref MMAL_PARAMETER_MIRROR_T */
++
++	/* 0x10 */
++	MMAL_PARAMETER_CAMERA_NUM, /**< @ref MMAL_PARAMETER_UINT32_T */
++	MMAL_PARAMETER_CAPTURE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */
++	MMAL_PARAMETER_EXPOSURE_MODE, /**< @ref MMAL_PARAMETER_EXPOSUREMODE_T */
++	MMAL_PARAMETER_EXP_METERING_MODE, /**< @ref MMAL_PARAMETER_EXPOSUREMETERINGMODE_T */
++	MMAL_PARAMETER_FOCUS_STATUS, /**< @ref MMAL_PARAMETER_FOCUS_STATUS_T */
++	MMAL_PARAMETER_CAMERA_CONFIG, /**< @ref MMAL_PARAMETER_CAMERA_CONFIG_T */
++	MMAL_PARAMETER_CAPTURE_STATUS, /**< @ref MMAL_PARAMETER_CAPTURE_STATUS_T */
++	MMAL_PARAMETER_FACE_TRACK, /**< @ref MMAL_PARAMETER_FACE_TRACK_T */
++	MMAL_PARAMETER_DRAW_BOX_FACES_AND_FOCUS, /**< @ref MMAL_PARAMETER_BOOLEAN_T */
++	MMAL_PARAMETER_JPEG_Q_FACTOR, /**< @ref MMAL_PARAMETER_UINT32_T */
++	MMAL_PARAMETER_FRAME_RATE, /**< @ref MMAL_PARAMETER_FRAME_RATE_T */
++	MMAL_PARAMETER_USE_STC, /**< @ref MMAL_PARAMETER_CAMERA_STC_MODE_T */
++	MMAL_PARAMETER_CAMERA_INFO, /**< @ref MMAL_PARAMETER_CAMERA_INFO_T */
++	MMAL_PARAMETER_VIDEO_STABILISATION, /**< @ref MMAL_PARAMETER_BOOLEAN_T */
++	MMAL_PARAMETER_FACE_TRACK_RESULTS, /**< @ref MMAL_PARAMETER_FACE_TRACK_RESULTS_T */
++	MMAL_PARAMETER_ENABLE_RAW_CAPTURE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */
++
++	/* 0x20 */
++	MMAL_PARAMETER_DPF_FILE, /**< @ref MMAL_PARAMETER_URI_T */
++	MMAL_PARAMETER_ENABLE_DPF_FILE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */
++	MMAL_PARAMETER_DPF_FAIL_IS_FATAL, /**< @ref MMAL_PARAMETER_BOOLEAN_T */
++	MMAL_PARAMETER_CAPTURE_MODE, /**< @ref MMAL_PARAMETER_CAPTUREMODE_T */
++	MMAL_PARAMETER_FOCUS_REGIONS, /**< @ref MMAL_PARAMETER_FOCUS_REGIONS_T */
++	MMAL_PARAMETER_INPUT_CROP, /**< @ref MMAL_PARAMETER_INPUT_CROP_T */
++	MMAL_PARAMETER_SENSOR_INFORMATION, /**< @ref MMAL_PARAMETER_SENSOR_INFORMATION_T */
++	MMAL_PARAMETER_FLASH_SELECT, /**< @ref MMAL_PARAMETER_FLASH_SELECT_T */
++	MMAL_PARAMETER_FIELD_OF_VIEW, /**< @ref MMAL_PARAMETER_FIELD_OF_VIEW_T */
++	MMAL_PARAMETER_HIGH_DYNAMIC_RANGE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */
++	MMAL_PARAMETER_DYNAMIC_RANGE_COMPRESSION, /**< @ref MMAL_PARAMETER_DRC_T */
++	MMAL_PARAMETER_ALGORITHM_CONTROL, /**< @ref MMAL_PARAMETER_ALGORITHM_CONTROL_T */
++	MMAL_PARAMETER_SHARPNESS, /**< @ref MMAL_PARAMETER_RATIONAL_T */
++	MMAL_PARAMETER_CONTRAST, /**< @ref MMAL_PARAMETER_RATIONAL_T */
++	MMAL_PARAMETER_BRIGHTNESS, /**< @ref MMAL_PARAMETER_RATIONAL_T */
++	MMAL_PARAMETER_SATURATION, /**< @ref MMAL_PARAMETER_RATIONAL_T */
++
++	/* 0x30 */
++	MMAL_PARAMETER_ISO, /**< @ref MMAL_PARAMETER_UINT32_T */
++	MMAL_PARAMETER_ANTISHAKE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */
++
++	/** @ref MMAL_PARAMETER_IMAGEFX_PARAMETERS_T */
++	MMAL_PARAMETER_IMAGE_EFFECT_PARAMETERS,
++
++	/** @ref MMAL_PARAMETER_BOOLEAN_T */
++	MMAL_PARAMETER_CAMERA_BURST_CAPTURE,
++
++	/** @ref MMAL_PARAMETER_UINT32_T */
++	MMAL_PARAMETER_CAMERA_MIN_ISO,
++
++	/** @ref MMAL_PARAMETER_CAMERA_USE_CASE_T */
++	MMAL_PARAMETER_CAMERA_USE_CASE,
++
++	/**< @ref MMAL_PARAMETER_BOOLEAN_T */
++	MMAL_PARAMETER_CAPTURE_STATS_PASS,
++
++	/** @ref MMAL_PARAMETER_UINT32_T */
++	MMAL_PARAMETER_CAMERA_CUSTOM_SENSOR_CONFIG,
++
++	/** @ref MMAL_PARAMETER_BOOLEAN_T */
++	MMAL_PARAMETER_ENABLE_REGISTER_FILE,
++
++	/** @ref MMAL_PARAMETER_BOOLEAN_T */
++	MMAL_PARAMETER_REGISTER_FAIL_IS_FATAL,
++
++	/** @ref MMAL_PARAMETER_CONFIGFILE_T */
++	MMAL_PARAMETER_CONFIGFILE_REGISTERS,
++
++	/** @ref MMAL_PARAMETER_CONFIGFILE_CHUNK_T */
++	MMAL_PARAMETER_CONFIGFILE_CHUNK_REGISTERS,
++	MMAL_PARAMETER_JPEG_ATTACH_LOG, /**< @ref MMAL_PARAMETER_BOOLEAN_T */
++	MMAL_PARAMETER_ZERO_SHUTTER_LAG, /**< @ref MMAL_PARAMETER_ZEROSHUTTERLAG_T */
++	MMAL_PARAMETER_FPS_RANGE, /**< @ref MMAL_PARAMETER_FPS_RANGE_T */
++	MMAL_PARAMETER_CAPTURE_EXPOSURE_COMP, /**< @ref MMAL_PARAMETER_INT32_T */
++
++	/* 0x40 */
++	MMAL_PARAMETER_SW_SHARPEN_DISABLE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */
++	MMAL_PARAMETER_FLASH_REQUIRED, /**< @ref MMAL_PARAMETER_BOOLEAN_T */
++	MMAL_PARAMETER_SW_SATURATION_DISABLE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */
++	MMAL_PARAMETER_SHUTTER_SPEED              /**< Takes a @ref MMAL_PARAMETER_UINT32_T */
++};
++
++struct mmal_parameter_rational {
++	s32 num;    /**< Numerator */
++	s32 den;    /**< Denominator */
++};
++
++enum mmal_parameter_camera_config_timestamp_mode {
++	MMAL_PARAM_TIMESTAMP_MODE_ZERO = 0, /* Always timestamp frames as 0 */
++	MMAL_PARAM_TIMESTAMP_MODE_RAW_STC,  /* Use the raw STC value
++					     * for the frame timestamp
++					     */
++	MMAL_PARAM_TIMESTAMP_MODE_RESET_STC, /* Use the STC timestamp
++					      * but subtract the
++					      * timestamp of the first
++					      * frame sent to give a
++					      * zero based timestamp.
++					      */
++};
++
++/* camera configuration parameter */
++struct mmal_parameter_camera_config {
++	/* Parameters for setting up the image pools */
++	u32 max_stills_w; /* Max size of stills capture */
++	u32 max_stills_h;
++	u32 stills_yuv422; /* Allow YUV422 stills capture */
++	u32 one_shot_stills; /* Continuous or one shot stills captures. */
++
++	u32 max_preview_video_w; /* Max size of the preview or video
++				  * capture frames
++				  */
++	u32 max_preview_video_h;
++	u32 num_preview_video_frames;
++
++	/** Sets the height of the circular buffer for stills capture. */
++	u32 stills_capture_circular_buffer_height;
++
++	/** Allows preview/encode to resume as fast as possible after the stills
++	 * input frame has been received, and then processes the still frame in
++	 * the background whilst preview/encode has resumed.
++	 * Actual mode is controlled by MMAL_PARAMETER_CAPTURE_MODE.
++	 */
++	u32 fast_preview_resume;
++
++	/** Selects algorithm for timestamping frames if
++	 * there is no clock component connected.
++	 * enum mmal_parameter_camera_config_timestamp_mode
++	 */
++	s32 use_stc_timestamp;
++};
++
++
++enum mmal_parameter_exposuremode {
++	MMAL_PARAM_EXPOSUREMODE_OFF,
++	MMAL_PARAM_EXPOSUREMODE_AUTO,
++	MMAL_PARAM_EXPOSUREMODE_NIGHT,
++	MMAL_PARAM_EXPOSUREMODE_NIGHTPREVIEW,
++	MMAL_PARAM_EXPOSUREMODE_BACKLIGHT,
++	MMAL_PARAM_EXPOSUREMODE_SPOTLIGHT,
++	MMAL_PARAM_EXPOSUREMODE_SPORTS,
++	MMAL_PARAM_EXPOSUREMODE_SNOW,
++	MMAL_PARAM_EXPOSUREMODE_BEACH,
++	MMAL_PARAM_EXPOSUREMODE_VERYLONG,
++	MMAL_PARAM_EXPOSUREMODE_FIXEDFPS,
++	MMAL_PARAM_EXPOSUREMODE_ANTISHAKE,
++	MMAL_PARAM_EXPOSUREMODE_FIREWORKS,
++};
++
++enum mmal_parameter_exposuremeteringmode {
++	MMAL_PARAM_EXPOSUREMETERINGMODE_AVERAGE,
++	MMAL_PARAM_EXPOSUREMETERINGMODE_SPOT,
++	MMAL_PARAM_EXPOSUREMETERINGMODE_BACKLIT,
++	MMAL_PARAM_EXPOSUREMETERINGMODE_MATRIX,
++};
++
++enum mmal_parameter_awbmode {
++	MMAL_PARAM_AWBMODE_OFF,
++	MMAL_PARAM_AWBMODE_AUTO,
++	MMAL_PARAM_AWBMODE_SUNLIGHT,
++	MMAL_PARAM_AWBMODE_CLOUDY,
++	MMAL_PARAM_AWBMODE_SHADE,
++	MMAL_PARAM_AWBMODE_TUNGSTEN,
++	MMAL_PARAM_AWBMODE_FLUORESCENT,
++	MMAL_PARAM_AWBMODE_INCANDESCENT,
++	MMAL_PARAM_AWBMODE_FLASH,
++	MMAL_PARAM_AWBMODE_HORIZON,
++};
++
++enum mmal_parameter_imagefx {
++	MMAL_PARAM_IMAGEFX_NONE,
++	MMAL_PARAM_IMAGEFX_NEGATIVE,
++	MMAL_PARAM_IMAGEFX_SOLARIZE,
++	MMAL_PARAM_IMAGEFX_POSTERIZE,
++	MMAL_PARAM_IMAGEFX_WHITEBOARD,
++	MMAL_PARAM_IMAGEFX_BLACKBOARD,
++	MMAL_PARAM_IMAGEFX_SKETCH,
++	MMAL_PARAM_IMAGEFX_DENOISE,
++	MMAL_PARAM_IMAGEFX_EMBOSS,
++	MMAL_PARAM_IMAGEFX_OILPAINT,
++	MMAL_PARAM_IMAGEFX_HATCH,
++	MMAL_PARAM_IMAGEFX_GPEN,
++	MMAL_PARAM_IMAGEFX_PASTEL,
++	MMAL_PARAM_IMAGEFX_WATERCOLOUR,
++	MMAL_PARAM_IMAGEFX_FILM,
++	MMAL_PARAM_IMAGEFX_BLUR,
++	MMAL_PARAM_IMAGEFX_SATURATION,
++	MMAL_PARAM_IMAGEFX_COLOURSWAP,
++	MMAL_PARAM_IMAGEFX_WASHEDOUT,
++	MMAL_PARAM_IMAGEFX_POSTERISE,
++	MMAL_PARAM_IMAGEFX_COLOURPOINT,
++	MMAL_PARAM_IMAGEFX_COLOURBALANCE,
++	MMAL_PARAM_IMAGEFX_CARTOON,
++};
++
++enum MMAL_PARAM_FLICKERAVOID_T {
++	MMAL_PARAM_FLICKERAVOID_OFF,
++	MMAL_PARAM_FLICKERAVOID_AUTO,
++	MMAL_PARAM_FLICKERAVOID_50HZ,
++	MMAL_PARAM_FLICKERAVOID_60HZ,
++	MMAL_PARAM_FLICKERAVOID_MAX = 0x7FFFFFFF
++};
++
++/** Manner of video rate control */
++enum mmal_parameter_rate_control_mode {
++	MMAL_VIDEO_RATECONTROL_DEFAULT,
++	MMAL_VIDEO_RATECONTROL_VARIABLE,
++	MMAL_VIDEO_RATECONTROL_CONSTANT,
++	MMAL_VIDEO_RATECONTROL_VARIABLE_SKIP_FRAMES,
++	MMAL_VIDEO_RATECONTROL_CONSTANT_SKIP_FRAMES
++};
++
++/* video parameters */
++
++enum mmal_parameter_video_type {
++	/** @ref MMAL_DISPLAYREGION_T */
++	MMAL_PARAMETER_DISPLAYREGION = MMAL_PARAMETER_GROUP_VIDEO,
++
++	/** @ref MMAL_PARAMETER_VIDEO_PROFILE_T */
++	MMAL_PARAMETER_SUPPORTED_PROFILES,
++
++	/** @ref MMAL_PARAMETER_VIDEO_PROFILE_T */
++	MMAL_PARAMETER_PROFILE,
++
++	/** @ref MMAL_PARAMETER_UINT32_T */
++	MMAL_PARAMETER_INTRAPERIOD,
++
++	/** @ref MMAL_PARAMETER_VIDEO_RATECONTROL_T */
++	MMAL_PARAMETER_RATECONTROL,
++
++	/** @ref MMAL_PARAMETER_VIDEO_NALUNITFORMAT_T */
++	MMAL_PARAMETER_NALUNITFORMAT,
++
++	/** @ref MMAL_PARAMETER_BOOLEAN_T */
++	MMAL_PARAMETER_MINIMISE_FRAGMENTATION,
++
++	/** @ref MMAL_PARAMETER_UINT32_T.
++	 * Setting the value to zero resets to the default (one slice per frame).
++	 */
++	MMAL_PARAMETER_MB_ROWS_PER_SLICE,
++
++	/** @ref MMAL_PARAMETER_VIDEO_LEVEL_EXTENSION_T */
++	MMAL_PARAMETER_VIDEO_LEVEL_EXTENSION,
++
++	/** @ref MMAL_PARAMETER_VIDEO_EEDE_ENABLE_T */
++	MMAL_PARAMETER_VIDEO_EEDE_ENABLE,
++
++	/** @ref MMAL_PARAMETER_VIDEO_EEDE_LOSSRATE_T */
++	MMAL_PARAMETER_VIDEO_EEDE_LOSSRATE,
++
++	/** @ref MMAL_PARAMETER_BOOLEAN_T. Request an I-frame. */
++	MMAL_PARAMETER_VIDEO_REQUEST_I_FRAME,
++	/** @ref MMAL_PARAMETER_VIDEO_INTRA_REFRESH_T */
++	MMAL_PARAMETER_VIDEO_INTRA_REFRESH,
++
++	/** @ref MMAL_PARAMETER_BOOLEAN_T. */
++	MMAL_PARAMETER_VIDEO_IMMUTABLE_INPUT,
++
++	/** @ref MMAL_PARAMETER_UINT32_T. Run-time bit rate control */
++	MMAL_PARAMETER_VIDEO_BIT_RATE,
++
++	/** @ref MMAL_PARAMETER_FRAME_RATE_T */
++	MMAL_PARAMETER_VIDEO_FRAME_RATE,
++
++	/** @ref MMAL_PARAMETER_UINT32_T. */
++	MMAL_PARAMETER_VIDEO_ENCODE_MIN_QUANT,
++
++	/** @ref MMAL_PARAMETER_UINT32_T. */
++	MMAL_PARAMETER_VIDEO_ENCODE_MAX_QUANT,
++
++	/** @ref MMAL_PARAMETER_VIDEO_ENCODE_RC_MODEL_T. */
++	MMAL_PARAMETER_VIDEO_ENCODE_RC_MODEL,
++
++	MMAL_PARAMETER_EXTRA_BUFFERS, /**< @ref MMAL_PARAMETER_UINT32_T. */
++	/** @ref MMAL_PARAMETER_UINT32_T.
++	 * Changing this parameter from the default can reduce frame rate
++	 * because image buffers need to be re-pitched.
++	 */
++	MMAL_PARAMETER_VIDEO_ALIGN_HORIZ,
++
++	/** @ref MMAL_PARAMETER_UINT32_T.
++	 * Changing this parameter from the default can reduce frame rate
++	 * because image buffers need to be re-pitched.
++	 */
++	MMAL_PARAMETER_VIDEO_ALIGN_VERT,
++
++	/** @ref MMAL_PARAMETER_BOOLEAN_T. */
++	MMAL_PARAMETER_VIDEO_DROPPABLE_PFRAMES,
++
++	/** @ref MMAL_PARAMETER_UINT32_T. */
++	MMAL_PARAMETER_VIDEO_ENCODE_INITIAL_QUANT,
++
++	/**< @ref MMAL_PARAMETER_UINT32_T. */
++	MMAL_PARAMETER_VIDEO_ENCODE_QP_P,
++
++	/**< @ref MMAL_PARAMETER_UINT32_T. */
++	MMAL_PARAMETER_VIDEO_ENCODE_RC_SLICE_DQUANT,
++
++	/** @ref MMAL_PARAMETER_UINT32_T */
++	MMAL_PARAMETER_VIDEO_ENCODE_FRAME_LIMIT_BITS,
++
++	/** @ref MMAL_PARAMETER_UINT32_T. */
++	MMAL_PARAMETER_VIDEO_ENCODE_PEAK_RATE,
++
++	/* H264 specific parameters */
++
++	/** @ref MMAL_PARAMETER_BOOLEAN_T. */
++	MMAL_PARAMETER_VIDEO_ENCODE_H264_DISABLE_CABAC,
++
++	/** @ref MMAL_PARAMETER_BOOLEAN_T. */
++	MMAL_PARAMETER_VIDEO_ENCODE_H264_LOW_LATENCY,
++
++	/** @ref MMAL_PARAMETER_BOOLEAN_T. */
++	MMAL_PARAMETER_VIDEO_ENCODE_H264_AU_DELIMITERS,
++
++	/** @ref MMAL_PARAMETER_UINT32_T. */
++	MMAL_PARAMETER_VIDEO_ENCODE_H264_DEBLOCK_IDC,
++
++	/** @ref MMAL_PARAMETER_VIDEO_ENCODER_H264_MB_INTRA_MODES_T. */
++	MMAL_PARAMETER_VIDEO_ENCODE_H264_MB_INTRA_MODE,
++
++	/** @ref MMAL_PARAMETER_BOOLEAN_T */
++	MMAL_PARAMETER_VIDEO_ENCODE_HEADER_ON_OPEN,
++
++	/** @ref MMAL_PARAMETER_BOOLEAN_T */
++	MMAL_PARAMETER_VIDEO_ENCODE_PRECODE_FOR_QP,
++
++	/** @ref MMAL_PARAMETER_VIDEO_DRM_INIT_INFO_T. */
++	MMAL_PARAMETER_VIDEO_DRM_INIT_INFO,
++
++	/** @ref MMAL_PARAMETER_BOOLEAN_T */
++	MMAL_PARAMETER_VIDEO_TIMESTAMP_FIFO,
++
++	/** @ref MMAL_PARAMETER_BOOLEAN_T */
++	MMAL_PARAMETER_VIDEO_DECODE_ERROR_CONCEALMENT,
++
++	/** @ref MMAL_PARAMETER_VIDEO_DRM_PROTECT_BUFFER_T. */
++	MMAL_PARAMETER_VIDEO_DRM_PROTECT_BUFFER,
++
++	/** @ref MMAL_PARAMETER_BYTES_T */
++	MMAL_PARAMETER_VIDEO_DECODE_CONFIG_VD3,
++
++	/**< @ref MMAL_PARAMETER_BOOLEAN_T */
++	MMAL_PARAMETER_VIDEO_ENCODE_H264_VCL_HRD_PARAMETERS,
++
++	/**< @ref MMAL_PARAMETER_BOOLEAN_T */
++	MMAL_PARAMETER_VIDEO_ENCODE_H264_LOW_DELAY_HRD_FLAG,
++
++	/**< @ref MMAL_PARAMETER_BOOLEAN_T */
++	MMAL_PARAMETER_VIDEO_ENCODE_INLINE_HEADER
++};
++
++/** Valid mirror modes */
++enum mmal_parameter_mirror {
++	MMAL_PARAM_MIRROR_NONE,
++	MMAL_PARAM_MIRROR_VERTICAL,
++	MMAL_PARAM_MIRROR_HORIZONTAL,
++	MMAL_PARAM_MIRROR_BOTH,
++};
++
++enum mmal_parameter_displaytransform {
++	MMAL_DISPLAY_ROT0 = 0,
++	MMAL_DISPLAY_MIRROR_ROT0 = 1,
++	MMAL_DISPLAY_MIRROR_ROT180 = 2,
++	MMAL_DISPLAY_ROT180 = 3,
++	MMAL_DISPLAY_MIRROR_ROT90 = 4,
++	MMAL_DISPLAY_ROT270 = 5,
++	MMAL_DISPLAY_ROT90 = 6,
++	MMAL_DISPLAY_MIRROR_ROT270 = 7,
++};
++
++enum mmal_parameter_displaymode {
++	MMAL_DISPLAY_MODE_FILL = 0,
++	MMAL_DISPLAY_MODE_LETTERBOX = 1,
++};
++
++enum mmal_parameter_displayset {
++	MMAL_DISPLAY_SET_NONE = 0,
++	MMAL_DISPLAY_SET_NUM = 1,
++	MMAL_DISPLAY_SET_FULLSCREEN = 2,
++	MMAL_DISPLAY_SET_TRANSFORM = 4,
++	MMAL_DISPLAY_SET_DEST_RECT = 8,
++	MMAL_DISPLAY_SET_SRC_RECT = 0x10,
++	MMAL_DISPLAY_SET_MODE = 0x20,
++	MMAL_DISPLAY_SET_PIXEL = 0x40,
++	MMAL_DISPLAY_SET_NOASPECT = 0x80,
++	MMAL_DISPLAY_SET_LAYER = 0x100,
++	MMAL_DISPLAY_SET_COPYPROTECT = 0x200,
++	MMAL_DISPLAY_SET_ALPHA = 0x400,
++};
++
++struct mmal_parameter_displayregion {
++	/** Bitfield that indicates which fields are set and should be
++	 * used. All other fields will maintain their current value.
++	 * \ref MMAL_DISPLAYSET_T defines the bits that can be
++	 * combined.
++	 */
++	u32 set;
++
++	/** Describes the display output device, with 0 typically
++	 * being a directly connected LCD display.  The actual values
++	 * will depend on the hardware.  Code using hard-wired numbers
++	 * (e.g. 2) is certain to fail.
++	 */
++
++	u32 display_num;
++	/** Indicates that we are using the full device screen area,
++	 * rather than a window of the display.  If zero, then
++	 * dest_rect is used to specify a region of the display to
++	 * use.
++	 */
++
++	s32 fullscreen;
++	/** Indicates any rotation or flipping used to map frames onto
++	 * the natural display orientation.
++	 */
++	u32 transform; /* enum mmal_parameter_displaytransform */
++
++	/** Where to display the frame within the screen, if
++	 * fullscreen is zero.
++	 */
++	struct vchiq_mmal_rect dest_rect;
++
++	/** Indicates which area of the frame to display. If all
++	 * values are zero, the whole frame will be used.
++	 */
++	struct vchiq_mmal_rect src_rect;
++
++	/** If set to non-zero, indicates that any display scaling
++	 * should disregard the aspect ratio of the frame region being
++	 * displayed.
++	 */
++	s32 noaspect;
++
++	/** Indicates how the image should be scaled to fit the
++	 * display. \code MMAL_DISPLAY_MODE_FILL \endcode indicates
++	 * that the image should fill the screen by potentially
++	 * cropping the frames.  Setting \code mode \endcode to \code
++	 * MMAL_DISPLAY_MODE_LETTERBOX \endcode indicates that all the
++	 * source region should be displayed and black bars added if
++	 * necessary.
++	 */
++	u32 mode; /* enum mmal_parameter_displaymode */
++
++	/** If non-zero, defines the width of a source pixel relative
++	 * to \code pixel_y \endcode.  If zero, then pixels default to
++	 * being square.
++	 */
++	u32 pixel_x;
++
++	/** If non-zero, defines the height of a source pixel relative
++	 * to \code pixel_x \endcode.  If zero, then pixels default to
++	 * being square.
++	 */
++	u32 pixel_y;
++
++	/** Sets the relative depth of the images, with greater values
++	 * being in front of smaller values.
++	 */
++	u32 layer;
++
++	/** Set to non-zero to ensure copy protection is used on
++	 * output.
++	 */
++	s32 copyprotect_required;
++
++	/** Level of opacity of the layer, where zero is fully
++	 * transparent and 255 is fully opaque.
++	 */
++	u32 alpha;
++};
++
++#define MMAL_MAX_IMAGEFX_PARAMETERS 5
++
++struct mmal_parameter_imagefx_parameters {
++	enum mmal_parameter_imagefx effect;
++	u32 num_effect_params;
++	u32 effect_parameter[MMAL_MAX_IMAGEFX_PARAMETERS];
++};
+diff -Nur linux-3.12.6/drivers/media/platform/bcm2835/mmal-vchiq.c linux-raspberry-pi/drivers/media/platform/bcm2835/mmal-vchiq.c
+--- linux-3.12.6/drivers/media/platform/bcm2835/mmal-vchiq.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/media/platform/bcm2835/mmal-vchiq.c	2013-12-29 10:40:41.000000000 +0100
+@@ -0,0 +1,1916 @@
++/*
++ * Broadcom BM2835 V4L2 driver
++ *
++ * Copyright © 2013 Raspberry Pi (Trading) Ltd.
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file COPYING in the main directory of this archive
++ * for more details.
++ *
++ * Authors: Vincent Sanders <vincent.sanders@collabora.co.uk>
++ *          Dave Stevenson <dsteve@broadcom.com>
++ *          Simon Mellor <simellor@broadcom.com>
++ *          Luke Diamand <luked@broadcom.com>
++ *
++ * V4L2 driver MMAL vchiq interface code
++ */
++
++#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
++
++#include <linux/errno.h>
++#include <linux/kernel.h>
++#include <linux/mutex.h>
++#include <linux/mm.h>
++#include <linux/slab.h>
++#include <linux/completion.h>
++#include <linux/vmalloc.h>
++#include <asm/cacheflush.h>
++#include <media/videobuf2-vmalloc.h>
++
++#include "mmal-common.h"
++#include "mmal-vchiq.h"
++#include "mmal-msg.h"
++
++#define USE_VCHIQ_ARM
++#include "interface/vchi/vchi.h"
++
++/* maximum number of components supported */
++#define VCHIQ_MMAL_MAX_COMPONENTS 4
++
++/*#define FULL_MSG_DUMP 1*/
++
++#ifdef DEBUG
++static const char *const msg_type_names[] = {
++	"UNKNOWN",
++	"QUIT",
++	"SERVICE_CLOSED",
++	"GET_VERSION",
++	"COMPONENT_CREATE",
++	"COMPONENT_DESTROY",
++	"COMPONENT_ENABLE",
++	"COMPONENT_DISABLE",
++	"PORT_INFO_GET",
++	"PORT_INFO_SET",
++	"PORT_ACTION",
++	"BUFFER_FROM_HOST",
++	"BUFFER_TO_HOST",
++	"GET_STATS",
++	"PORT_PARAMETER_SET",
++	"PORT_PARAMETER_GET",
++	"EVENT_TO_HOST",
++	"GET_CORE_STATS_FOR_PORT",
++	"OPAQUE_ALLOCATOR",
++	"CONSUME_MEM",
++	"LMK",
++	"OPAQUE_ALLOCATOR_DESC",
++	"DRM_GET_LHS32",
++	"DRM_GET_TIME",
++	"BUFFER_FROM_HOST_ZEROLEN",
++	"PORT_FLUSH",
++	"HOST_LOG",
++};
++#endif
++
++static const char *const port_action_type_names[] = {
++	"UNKNOWN",
++	"ENABLE",
++	"DISABLE",
++	"FLUSH",
++	"CONNECT",
++	"DISCONNECT",
++	"SET_REQUIREMENTS",
++};
++
++#if defined(DEBUG)
++#if defined(FULL_MSG_DUMP)
++#define DBG_DUMP_MSG(MSG, MSG_LEN, TITLE)				\
++	do {								\
++		pr_debug(TITLE" type:%s(%d) length:%d\n",		\
++			 msg_type_names[(MSG)->h.type],			\
++			 (MSG)->h.type, (MSG_LEN));			\
++		print_hex_dump(KERN_DEBUG, "<<h: ", DUMP_PREFIX_OFFSET,	\
++			       16, 4, (MSG),				\
++			       sizeof(struct mmal_msg_header), 1);	\
++		print_hex_dump(KERN_DEBUG, "<<p: ", DUMP_PREFIX_OFFSET,	\
++			       16, 4,					\
++			       ((u8 *)(MSG)) + sizeof(struct mmal_msg_header),\
++			       (MSG_LEN) - sizeof(struct mmal_msg_header), 1); \
++	} while (0)
++#else
++#define DBG_DUMP_MSG(MSG, MSG_LEN, TITLE)				\
++	{								\
++		pr_debug(TITLE" type:%s(%d) length:%d\n",		\
++			 msg_type_names[(MSG)->h.type],			\
++			 (MSG)->h.type, (MSG_LEN));			\
++	}
++#endif
++#else
++#define DBG_DUMP_MSG(MSG, MSG_LEN, TITLE)
++#endif
++
++/* normal message context */
++struct mmal_msg_context {
++	union {
++		struct {
++			/* work struct for defered callback - must come first */
++			struct work_struct work;
++			/* mmal instance */
++			struct vchiq_mmal_instance *instance;
++			/* mmal port */
++			struct vchiq_mmal_port *port;
++			/* actual buffer used to store bulk reply */
++			struct mmal_buffer *buffer;
++			/* amount of buffer used */
++			unsigned long buffer_used;
++			/* MMAL buffer flags */
++			u32 mmal_flags;
++			/* Presentation and Decode timestamps */
++			s64 pts;
++			s64 dts;
++
++			int status;	/* context status */
++
++		} bulk;		/* bulk data */
++
++		struct {
++			/* message handle to release */
++			VCHI_HELD_MSG_T msg_handle;
++			/* pointer to received message */
++			struct mmal_msg *msg;
++			/* received message length */
++			u32 msg_len;
++			/* completion upon reply */
++			struct completion cmplt;
++		} sync;		/* synchronous response */
++	} u;
++
++};
++
++struct vchiq_mmal_instance {
++	VCHI_SERVICE_HANDLE_T handle;
++
++	/* ensure serialised access to service */
++	struct mutex vchiq_mutex;
++
++	/* ensure serialised access to bulk operations */
++	struct mutex bulk_mutex;
++
++	/* vmalloc page to receive scratch bulk xfers into */
++	void *bulk_scratch;
++
++	/* component to use next */
++	int component_idx;
++	struct vchiq_mmal_component component[VCHIQ_MMAL_MAX_COMPONENTS];
++};
++
++static struct mmal_msg_context *get_msg_context(struct vchiq_mmal_instance
++						*instance)
++{
++	struct mmal_msg_context *msg_context;
++
++	/* todo: should this be allocated from a pool to avoid kmalloc */
++	msg_context = kmalloc(sizeof(*msg_context), GFP_KERNEL);
++	memset(msg_context, 0, sizeof(*msg_context));
++
++	return msg_context;
++}
++
++static void release_msg_context(struct mmal_msg_context *msg_context)
++{
++	kfree(msg_context);
++}
++
++/* deals with receipt of event to host message */
++static void event_to_host_cb(struct vchiq_mmal_instance *instance,
++			     struct mmal_msg *msg, u32 msg_len)
++{
++	pr_debug("unhandled event\n");
++	pr_debug("component:%p port type:%d num:%d cmd:0x%x length:%d\n",
++		 msg->u.event_to_host.client_component,
++		 msg->u.event_to_host.port_type,
++		 msg->u.event_to_host.port_num,
++		 msg->u.event_to_host.cmd, msg->u.event_to_host.length);
++}
++
++/* workqueue scheduled callback
++ *
++ * we do this because it is important we do not call any other vchiq
++ * sync calls from witin the message delivery thread
++ */
++static void buffer_work_cb(struct work_struct *work)
++{
++	struct mmal_msg_context *msg_context = (struct mmal_msg_context *)work;
++
++	msg_context->u.bulk.port->buffer_cb(msg_context->u.bulk.instance,
++					    msg_context->u.bulk.port,
++					    msg_context->u.bulk.status,
++					    msg_context->u.bulk.buffer,
++					    msg_context->u.bulk.buffer_used,
++					    msg_context->u.bulk.mmal_flags,
++					    msg_context->u.bulk.dts,
++					    msg_context->u.bulk.pts);
++
++	/* release message context */
++	release_msg_context(msg_context);
++}
++
++/* enqueue a bulk receive for a given message context */
++static int bulk_receive(struct vchiq_mmal_instance *instance,
++			struct mmal_msg *msg,
++			struct mmal_msg_context *msg_context)
++{
++	unsigned long rd_len;
++	unsigned long flags = 0;
++	int ret;
++
++	/* bulk mutex stops other bulk operations while we have a
++	 * receive in progress - released in callback
++	 */
++	ret = mutex_lock_interruptible(&instance->bulk_mutex);
++	if (ret != 0)
++		return ret;
++
++	rd_len = msg->u.buffer_from_host.buffer_header.length;
++
++	/* take buffer from queue */
++	spin_lock_irqsave(&msg_context->u.bulk.port->slock, flags);
++	if (list_empty(&msg_context->u.bulk.port->buffers)) {
++		spin_unlock_irqrestore(&msg_context->u.bulk.port->slock, flags);
++		pr_err("buffer list empty trying to submit bulk receive\n");
++
++		/* todo: this is a serious error, we should never have
++		 * commited a buffer_to_host operation to the mmal
++		 * port without the buffer to back it up (underflow
++		 * handling) and there is no obvious way to deal with
++		 * this - how is the mmal servie going to react when
++		 * we fail to do the xfer and reschedule a buffer when
++		 * it arrives? perhaps a starved flag to indicate a
++		 * waiting bulk receive?
++		 */
++
++		mutex_unlock(&instance->bulk_mutex);
++
++		return -EINVAL;
++	}
++
++	msg_context->u.bulk.buffer =
++	    list_entry(msg_context->u.bulk.port->buffers.next,
++		       struct mmal_buffer, list);
++	list_del(&msg_context->u.bulk.buffer->list);
++
++	spin_unlock_irqrestore(&msg_context->u.bulk.port->slock, flags);
++
++	/* ensure we do not overrun the available buffer */
++	if (rd_len > msg_context->u.bulk.buffer->buffer_size) {
++		rd_len = msg_context->u.bulk.buffer->buffer_size;
++		pr_warn("short read as not enough receive buffer space\n");
++		/* todo: is this the correct response, what happens to
++		 * the rest of the message data?
++		 */
++	}
++
++	/* store length */
++	msg_context->u.bulk.buffer_used = rd_len;
++	msg_context->u.bulk.mmal_flags =
++	    msg->u.buffer_from_host.buffer_header.flags;
++	msg_context->u.bulk.dts = msg->u.buffer_from_host.buffer_header.dts;
++	msg_context->u.bulk.pts = msg->u.buffer_from_host.buffer_header.pts;
++
++	// only need to flush L1 cache here, as VCHIQ takes care of the L2
++	// cache.
++	__cpuc_flush_dcache_area(msg_context->u.bulk.buffer->buffer, rd_len);
++
++	/* queue the bulk submission */
++	vchi_service_use(instance->handle);
++	ret = vchi_bulk_queue_receive(instance->handle,
++				      msg_context->u.bulk.buffer->buffer,
++				      /* Actual receive needs to be a multiple
++				       * of 4 bytes
++				       */
++				      (rd_len + 3) & ~3,
++				      VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE |
++				      VCHI_FLAGS_BLOCK_UNTIL_QUEUED,
++				      msg_context);
++
++	vchi_service_release(instance->handle);
++
++	if (ret != 0) {
++		/* callback will not be clearing the mutex */
++		mutex_unlock(&instance->bulk_mutex);
++	}
++
++	return ret;
++}
++
++/* enque a dummy bulk receive for a given message context */
++static int dummy_bulk_receive(struct vchiq_mmal_instance *instance,
++			      struct mmal_msg_context *msg_context)
++{
++	int ret;
++
++	/* bulk mutex stops other bulk operations while we have a
++	 * receive in progress - released in callback
++	 */
++	ret = mutex_lock_interruptible(&instance->bulk_mutex);
++	if (ret != 0)
++		return ret;
++
++	/* zero length indicates this was a dummy transfer */
++	msg_context->u.bulk.buffer_used = 0;
++
++	/* queue the bulk submission */
++	vchi_service_use(instance->handle);
++
++	ret = vchi_bulk_queue_receive(instance->handle,
++				      instance->bulk_scratch,
++				      8,
++				      VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE |
++				      VCHI_FLAGS_BLOCK_UNTIL_QUEUED,
++				      msg_context);
++
++	vchi_service_release(instance->handle);
++
++	if (ret != 0) {
++		/* callback will not be clearing the mutex */
++		mutex_unlock(&instance->bulk_mutex);
++	}
++
++	return ret;
++}
++
++/* data in message, memcpy from packet into output buffer */
++static int inline_receive(struct vchiq_mmal_instance *instance,
++			  struct mmal_msg *msg,
++			  struct mmal_msg_context *msg_context)
++{
++	unsigned long flags = 0;
++
++	/* take buffer from queue */
++	spin_lock_irqsave(&msg_context->u.bulk.port->slock, flags);
++	if (list_empty(&msg_context->u.bulk.port->buffers)) {
++		spin_unlock_irqrestore(&msg_context->u.bulk.port->slock, flags);
++		pr_err("buffer list empty trying to receive inline\n");
++
++		/* todo: this is a serious error, we should never have
++		 * commited a buffer_to_host operation to the mmal
++		 * port without the buffer to back it up (with
++		 * underflow handling) and there is no obvious way to
++		 * deal with this. Less bad than the bulk case as we
++		 * can just drop this on the floor but...unhelpful
++		 */
++		return -EINVAL;
++	}
++
++	msg_context->u.bulk.buffer =
++	    list_entry(msg_context->u.bulk.port->buffers.next,
++		       struct mmal_buffer, list);
++	list_del(&msg_context->u.bulk.buffer->list);
++
++	spin_unlock_irqrestore(&msg_context->u.bulk.port->slock, flags);
++
++	memcpy(msg_context->u.bulk.buffer->buffer,
++	       msg->u.buffer_from_host.short_data,
++	       msg->u.buffer_from_host.payload_in_message);
++
++	msg_context->u.bulk.buffer_used =
++	    msg->u.buffer_from_host.payload_in_message;
++
++	return 0;
++}
++
++/* queue the buffer availability with MMAL_MSG_TYPE_BUFFER_FROM_HOST */
++static int
++buffer_from_host(struct vchiq_mmal_instance *instance,
++		 struct vchiq_mmal_port *port, struct mmal_buffer *buf)
++{
++	struct mmal_msg_context *msg_context;
++	struct mmal_msg m;
++	int ret;
++
++	pr_debug("instance:%p buffer:%p\n", instance->handle, buf);
++
++	/* bulk mutex stops other bulk operations while we
++	 * have a receive in progress
++	 */
++	if (mutex_lock_interruptible(&instance->bulk_mutex))
++		return -EINTR;
++
++	/* get context */
++	msg_context = get_msg_context(instance);
++	if (msg_context == NULL)
++		return -ENOMEM;
++
++	/* store bulk message context for when data arrives */
++	msg_context->u.bulk.instance = instance;
++	msg_context->u.bulk.port = port;
++	msg_context->u.bulk.buffer = NULL;	/* not valid until bulk xfer */
++	msg_context->u.bulk.buffer_used = 0;
++
++	/* initialise work structure ready to schedule callback */
++	INIT_WORK(&msg_context->u.bulk.work, buffer_work_cb);
++
++	/* prep the buffer from host message */
++	memset(&m, 0xbc, sizeof(m));	/* just to make debug clearer */
++
++	m.h.type = MMAL_MSG_TYPE_BUFFER_FROM_HOST;
++	m.h.magic = MMAL_MAGIC;
++	m.h.context = msg_context;
++	m.h.status = 0;
++
++	/* drvbuf is our private data passed back */
++	m.u.buffer_from_host.drvbuf.magic = MMAL_MAGIC;
++	m.u.buffer_from_host.drvbuf.component_handle = port->component->handle;
++	m.u.buffer_from_host.drvbuf.port_handle = port->handle;
++	m.u.buffer_from_host.drvbuf.client_context = msg_context;
++
++	/* buffer header */
++	m.u.buffer_from_host.buffer_header.cmd = 0;
++	m.u.buffer_from_host.buffer_header.data = buf->buffer;
++	m.u.buffer_from_host.buffer_header.alloc_size = buf->buffer_size;
++	m.u.buffer_from_host.buffer_header.length = 0;	/* nothing used yet */
++	m.u.buffer_from_host.buffer_header.offset = 0;	/* no offset */
++	m.u.buffer_from_host.buffer_header.flags = 0;	/* no flags */
++	m.u.buffer_from_host.buffer_header.pts = MMAL_TIME_UNKNOWN;
++	m.u.buffer_from_host.buffer_header.dts = MMAL_TIME_UNKNOWN;
++
++	/* clear buffer type sepecific data */
++	memset(&m.u.buffer_from_host.buffer_header_type_specific, 0,
++	       sizeof(m.u.buffer_from_host.buffer_header_type_specific));
++
++	/* no payload in message */
++	m.u.buffer_from_host.payload_in_message = 0;
++
++	vchi_service_use(instance->handle);
++
++	ret = vchi_msg_queue(instance->handle, &m,
++			     sizeof(struct mmal_msg_header) +
++			     sizeof(m.u.buffer_from_host),
++			     VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL);
++
++	if (ret != 0) {
++		release_msg_context(msg_context);
++		/* todo: is this correct error value? */
++	}
++
++	vchi_service_release(instance->handle);
++
++	mutex_unlock(&instance->bulk_mutex);
++
++	return ret;
++}
++
++/* submit a buffer to the mmal sevice
++ *
++ * the buffer_from_host uses size data from the ports next available
++ * mmal_buffer and deals with there being no buffer available by
++ * incrementing the underflow for later
++ */
++static int port_buffer_from_host(struct vchiq_mmal_instance *instance,
++				 struct vchiq_mmal_port *port)
++{
++	int ret;
++	struct mmal_buffer *buf;
++	unsigned long flags = 0;
++
++	if (!port->enabled)
++		return -EINVAL;
++
++	/* peek buffer from queue */
++	spin_lock_irqsave(&port->slock, flags);
++	if (list_empty(&port->buffers)) {
++		port->buffer_underflow++;
++		spin_unlock_irqrestore(&port->slock, flags);
++		return -ENOSPC;
++	}
++
++	buf = list_entry(port->buffers.next, struct mmal_buffer, list);
++
++	spin_unlock_irqrestore(&port->slock, flags);
++
++	/* issue buffer to mmal service */
++	ret = buffer_from_host(instance, port, buf);
++	if (ret) {
++		pr_err("adding buffer header failed\n");
++		/* todo: how should this be dealt with */
++	}
++
++	return ret;
++}
++
++/* deals with receipt of buffer to host message */
++static void buffer_to_host_cb(struct vchiq_mmal_instance *instance,
++			      struct mmal_msg *msg, u32 msg_len)
++{
++	struct mmal_msg_context *msg_context;
++
++	pr_debug("buffer_to_host_cb: instance:%p msg:%p msg_len:%d\n",
++		 instance, msg, msg_len);
++
++	if (msg->u.buffer_from_host.drvbuf.magic == MMAL_MAGIC) {
++		msg_context = msg->u.buffer_from_host.drvbuf.client_context;
++	} else {
++		pr_err("MMAL_MSG_TYPE_BUFFER_TO_HOST with bad magic\n");
++		return;
++	}
++
++	if (msg->h.status != MMAL_MSG_STATUS_SUCCESS) {
++		/* message reception had an error */
++		pr_warn("error %d in reply\n", msg->h.status);
++
++		msg_context->u.bulk.status = msg->h.status;
++
++	} else if (msg->u.buffer_from_host.buffer_header.length == 0) {
++		/* empty buffer */
++		if (msg->u.buffer_from_host.buffer_header.flags &
++		    MMAL_BUFFER_HEADER_FLAG_EOS) {
++			msg_context->u.bulk.status =
++			    dummy_bulk_receive(instance, msg_context);
++			if (msg_context->u.bulk.status == 0)
++				return;	/* successful bulk submission, bulk
++					 * completion will trigger callback
++					 */
++		} else {
++			/* do callback with empty buffer - not EOS though */
++			msg_context->u.bulk.status = 0;
++			msg_context->u.bulk.buffer_used = 0;
++		}
++	} else if (msg->u.buffer_from_host.payload_in_message == 0) {
++		/* data is not in message, queue a bulk receive */
++		msg_context->u.bulk.status =
++		    bulk_receive(instance, msg, msg_context);
++		if (msg_context->u.bulk.status == 0)
++			return;	/* successful bulk submission, bulk
++				 * completion will trigger callback
++				 */
++
++		/* failed to submit buffer, this will end badly */
++		pr_err("error %d on bulk submission\n",
++		       msg_context->u.bulk.status);
++
++	} else if (msg->u.buffer_from_host.payload_in_message <=
++		   MMAL_VC_SHORT_DATA) {
++		/* data payload within message */
++		msg_context->u.bulk.status = inline_receive(instance, msg,
++							    msg_context);
++	} else {
++		pr_err("message with invalid short payload\n");
++
++		/* signal error */
++		msg_context->u.bulk.status = -EINVAL;
++		msg_context->u.bulk.buffer_used =
++		    msg->u.buffer_from_host.payload_in_message;
++	}
++
++	/* replace the buffer header */
++	port_buffer_from_host(instance, msg_context->u.bulk.port);
++
++	/* schedule the port callback */
++	schedule_work(&msg_context->u.bulk.work);
++}
++
++static void bulk_receive_cb(struct vchiq_mmal_instance *instance,
++			    struct mmal_msg_context *msg_context)
++{
++	/* bulk receive operation complete */
++	mutex_unlock(&msg_context->u.bulk.instance->bulk_mutex);
++
++	/* replace the buffer header */
++	port_buffer_from_host(msg_context->u.bulk.instance,
++			      msg_context->u.bulk.port);
++
++	msg_context->u.bulk.status = 0;
++
++	/* schedule the port callback */
++	schedule_work(&msg_context->u.bulk.work);
++}
++
++static void bulk_abort_cb(struct vchiq_mmal_instance *instance,
++			  struct mmal_msg_context *msg_context)
++{
++	pr_err("%s: bulk ABORTED msg_context:%p\n", __func__, msg_context);
++
++	/* bulk receive operation complete */
++	mutex_unlock(&msg_context->u.bulk.instance->bulk_mutex);
++
++	/* replace the buffer header */
++	port_buffer_from_host(msg_context->u.bulk.instance,
++			      msg_context->u.bulk.port);
++
++	msg_context->u.bulk.status = -EINTR;
++
++	schedule_work(&msg_context->u.bulk.work);
++}
++
++/* incoming event service callback */
++static void service_callback(void *param,
++			     const VCHI_CALLBACK_REASON_T reason,
++			     void *bulk_ctx)
++{
++	struct vchiq_mmal_instance *instance = param;
++	int status;
++	u32 msg_len;
++	struct mmal_msg *msg;
++	VCHI_HELD_MSG_T msg_handle;
++
++	if (!instance) {
++		pr_err("Message callback passed NULL instance\n");
++		return;
++	}
++
++	switch (reason) {
++	case VCHI_CALLBACK_MSG_AVAILABLE:
++		status = vchi_msg_hold(instance->handle, (void **)&msg,
++				       &msg_len, VCHI_FLAGS_NONE, &msg_handle);
++		if (status) {
++			pr_err("Unable to dequeue a message (%d)\n", status);
++			break;
++		}
++
++		DBG_DUMP_MSG(msg, msg_len, "<<< reply message");
++
++		/* handling is different for buffer messages */
++		switch (msg->h.type) {
++
++		case MMAL_MSG_TYPE_BUFFER_FROM_HOST:
++			vchi_held_msg_release(&msg_handle);
++			break;
++
++		case MMAL_MSG_TYPE_EVENT_TO_HOST:
++			event_to_host_cb(instance, msg, msg_len);
++			vchi_held_msg_release(&msg_handle);
++
++			break;
++
++		case MMAL_MSG_TYPE_BUFFER_TO_HOST:
++			buffer_to_host_cb(instance, msg, msg_len);
++			vchi_held_msg_release(&msg_handle);
++			break;
++
++		default:
++			/* messages dependant on header context to complete */
++
++			/* todo: the msg.context really ought to be sanity
++			 * checked before we just use it, afaict it comes back
++			 * and is used raw from the videocore. Perhaps it
++			 * should be verified the address lies in the kernel
++			 * address space.
++			 */
++			if (msg->h.context == NULL) {
++				pr_err("received message context was null!\n");
++				vchi_held_msg_release(&msg_handle);
++				break;
++			}
++
++			/* fill in context values */
++			msg->h.context->u.sync.msg_handle = msg_handle;
++			msg->h.context->u.sync.msg = msg;
++			msg->h.context->u.sync.msg_len = msg_len;
++
++			/* todo: should this check (completion_done()
++			 * == 1) for no one waiting? or do we need a
++			 * flag to tell us the completion has been
++			 * interrupted so we can free the message and
++			 * its context. This probably also solves the
++			 * message arriving after interruption todo
++			 * below
++			 */
++
++			/* complete message so caller knows it happened */
++			complete(&msg->h.context->u.sync.cmplt);
++			break;
++		}
++
++		break;
++
++	case VCHI_CALLBACK_BULK_RECEIVED:
++		bulk_receive_cb(instance, bulk_ctx);
++		break;
++
++	case VCHI_CALLBACK_BULK_RECEIVE_ABORTED:
++		bulk_abort_cb(instance, bulk_ctx);
++		break;
++
++	case VCHI_CALLBACK_SERVICE_CLOSED:
++		/* TODO: consider if this requires action if received when
++		 * driver is not explicitly closing the service
++		 */
++		break;
++
++	default:
++		pr_err("Received unhandled message reason %d\n", reason);
++		break;
++	}
++}
++
++static int send_synchronous_mmal_msg(struct vchiq_mmal_instance *instance,
++				     struct mmal_msg *msg,
++				     unsigned int payload_len,
++				     struct mmal_msg **msg_out,
++				     VCHI_HELD_MSG_T *msg_handle_out)
++{
++	struct mmal_msg_context msg_context;
++	int ret;
++
++	/* payload size must not cause message to exceed max size */
++	if (payload_len >
++	    (MMAL_MSG_MAX_SIZE - sizeof(struct mmal_msg_header))) {
++		pr_err("payload length %d exceeds max:%d\n", payload_len,
++			 (MMAL_MSG_MAX_SIZE - sizeof(struct mmal_msg_header)));
++		return -EINVAL;
++	}
++
++	init_completion(&msg_context.u.sync.cmplt);
++
++	msg->h.magic = MMAL_MAGIC;
++	msg->h.context = &msg_context;
++	msg->h.status = 0;
++
++	DBG_DUMP_MSG(msg, (sizeof(struct mmal_msg_header) + payload_len),
++		     ">>> sync message");
++
++	vchi_service_use(instance->handle);
++
++	ret = vchi_msg_queue(instance->handle,
++			     msg,
++			     sizeof(struct mmal_msg_header) + payload_len,
++			     VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL);
++
++	vchi_service_release(instance->handle);
++
++	if (ret) {
++		pr_err("error %d queuing message\n", ret);
++		return ret;
++	}
++
++	ret = wait_for_completion_timeout(&msg_context.u.sync.cmplt, HZ);
++	if (ret <= 0) {
++		pr_err("error %d waiting for sync completion\n", ret);
++		if (ret == 0)
++			ret = -ETIME;
++		/* todo: what happens if the message arrives after aborting */
++		return ret;
++	}
++
++	*msg_out = msg_context.u.sync.msg;
++	*msg_handle_out = msg_context.u.sync.msg_handle;
++
++	return 0;
++}
++
++static void dump_port_info(struct vchiq_mmal_port *port)
++{
++	pr_debug("port handle:0x%x enabled:%d\n", port->handle, port->enabled);
++
++	pr_debug("buffer minimum num:%d size:%d align:%d\n",
++		 port->minimum_buffer.num,
++		 port->minimum_buffer.size, port->minimum_buffer.alignment);
++
++	pr_debug("buffer recommended num:%d size:%d align:%d\n",
++		 port->recommended_buffer.num,
++		 port->recommended_buffer.size,
++		 port->recommended_buffer.alignment);
++
++	pr_debug("buffer current values num:%d size:%d align:%d\n",
++		 port->current_buffer.num,
++		 port->current_buffer.size, port->current_buffer.alignment);
++
++	pr_debug("elementry stream: type:%d encoding:0x%x varient:0x%x\n",
++		 port->format.type,
++		 port->format.encoding, port->format.encoding_variant);
++
++	pr_debug("		    bitrate:%d flags:0x%x\n",
++		 port->format.bitrate, port->format.flags);
++
++	if (port->format.type == MMAL_ES_TYPE_VIDEO) {
++		pr_debug
++		    ("es video format: width:%d height:%d colourspace:0x%x\n",
++		     port->es.video.width, port->es.video.height,
++		     port->es.video.color_space);
++
++		pr_debug("		 : crop xywh %d,%d,%d,%d\n",
++			 port->es.video.crop.x,
++			 port->es.video.crop.y,
++			 port->es.video.crop.width, port->es.video.crop.height);
++		pr_debug("		 : framerate %d/%d  aspect %d/%d\n",
++			 port->es.video.frame_rate.num,
++			 port->es.video.frame_rate.den,
++			 port->es.video.par.num, port->es.video.par.den);
++	}
++}
++
++static void port_to_mmal_msg(struct vchiq_mmal_port *port, struct mmal_port *p)
++{
++
++	/* todo do readonly fields need setting at all? */
++	p->type = port->type;
++	p->index = port->index;
++	p->index_all = 0;
++	p->is_enabled = port->enabled;
++	p->buffer_num_min = port->minimum_buffer.num;
++	p->buffer_size_min = port->minimum_buffer.size;
++	p->buffer_alignment_min = port->minimum_buffer.alignment;
++	p->buffer_num_recommended = port->recommended_buffer.num;
++	p->buffer_size_recommended = port->recommended_buffer.size;
++
++	/* only three writable fields in a port */
++	p->buffer_num = port->current_buffer.num;
++	p->buffer_size = port->current_buffer.size;
++	p->userdata = port;
++}
++
++static int port_info_set(struct vchiq_mmal_instance *instance,
++			 struct vchiq_mmal_port *port)
++{
++	int ret;
++	struct mmal_msg m;
++	struct mmal_msg *rmsg;
++	VCHI_HELD_MSG_T rmsg_handle;
++
++	pr_debug("setting port info port %p\n", port);
++	if (!port)
++		return -1;
++	dump_port_info(port);
++
++	m.h.type = MMAL_MSG_TYPE_PORT_INFO_SET;
++
++	m.u.port_info_set.component_handle = port->component->handle;
++	m.u.port_info_set.port_type = port->type;
++	m.u.port_info_set.port_index = port->index;
++
++	port_to_mmal_msg(port, &m.u.port_info_set.port);
++
++	/* elementry stream format setup */
++	m.u.port_info_set.format.type = port->format.type;
++	m.u.port_info_set.format.encoding = port->format.encoding;
++	m.u.port_info_set.format.encoding_variant =
++	    port->format.encoding_variant;
++	m.u.port_info_set.format.bitrate = port->format.bitrate;
++	m.u.port_info_set.format.flags = port->format.flags;
++
++	memcpy(&m.u.port_info_set.es, &port->es,
++	       sizeof(union mmal_es_specific_format));
++
++	m.u.port_info_set.format.extradata_size = port->format.extradata_size;
++	memcpy(rmsg->u.port_info_set.extradata, port->format.extradata,
++	       port->format.extradata_size);
++
++	ret = send_synchronous_mmal_msg(instance, &m,
++					sizeof(m.u.port_info_set),
++					&rmsg, &rmsg_handle);
++	if (ret)
++		return ret;
++
++	if (rmsg->h.type != MMAL_MSG_TYPE_PORT_INFO_SET) {
++		/* got an unexpected message type in reply */
++		ret = -EINVAL;
++		goto release_msg;
++	}
++
++	/* return operation status */
++	ret = -rmsg->u.port_info_get_reply.status;
++
++	pr_debug("%s:result:%d component:0x%x port:%d\n", __func__, ret,
++		 port->component->handle, port->handle);
++
++release_msg:
++	vchi_held_msg_release(&rmsg_handle);
++
++	return ret;
++
++}
++
++/* use port info get message to retrive port information */
++static int port_info_get(struct vchiq_mmal_instance *instance,
++			 struct vchiq_mmal_port *port)
++{
++	int ret;
++	struct mmal_msg m;
++	struct mmal_msg *rmsg;
++	VCHI_HELD_MSG_T rmsg_handle;
++
++	/* port info time */
++	m.h.type = MMAL_MSG_TYPE_PORT_INFO_GET;
++	m.u.port_info_get.component_handle = port->component->handle;
++	m.u.port_info_get.port_type = port->type;
++	m.u.port_info_get.index = port->index;
++
++	ret = send_synchronous_mmal_msg(instance, &m,
++					sizeof(m.u.port_info_get),
++					&rmsg, &rmsg_handle);
++	if (ret)
++		return ret;
++
++	if (rmsg->h.type != MMAL_MSG_TYPE_PORT_INFO_GET) {
++		/* got an unexpected message type in reply */
++		ret = -EINVAL;
++		goto release_msg;
++	}
++
++	/* return operation status */
++	ret = -rmsg->u.port_info_get_reply.status;
++	if (ret != MMAL_MSG_STATUS_SUCCESS)
++		goto release_msg;
++
++	if (rmsg->u.port_info_get_reply.port.is_enabled == 0)
++		port->enabled = false;
++	else
++		port->enabled = true;
++
++	/* copy the values out of the message */
++	port->handle = rmsg->u.port_info_get_reply.port_handle;
++
++	/* port type and index cached to use on port info set becuase
++	 * it does not use a port handle
++	 */
++	port->type = rmsg->u.port_info_get_reply.port_type;
++	port->index = rmsg->u.port_info_get_reply.port_index;
++
++	port->minimum_buffer.num =
++	    rmsg->u.port_info_get_reply.port.buffer_num_min;
++	port->minimum_buffer.size =
++	    rmsg->u.port_info_get_reply.port.buffer_size_min;
++	port->minimum_buffer.alignment =
++	    rmsg->u.port_info_get_reply.port.buffer_alignment_min;
++
++	port->recommended_buffer.alignment =
++	    rmsg->u.port_info_get_reply.port.buffer_alignment_min;
++	port->recommended_buffer.num =
++	    rmsg->u.port_info_get_reply.port.buffer_num_recommended;
++
++	port->current_buffer.num = rmsg->u.port_info_get_reply.port.buffer_num;
++	port->current_buffer.size =
++	    rmsg->u.port_info_get_reply.port.buffer_size;
++
++	/* stream format */
++	port->format.type = rmsg->u.port_info_get_reply.format.type;
++	port->format.encoding = rmsg->u.port_info_get_reply.format.encoding;
++	port->format.encoding_variant =
++	    rmsg->u.port_info_get_reply.format.encoding_variant;
++	port->format.bitrate = rmsg->u.port_info_get_reply.format.bitrate;
++	port->format.flags = rmsg->u.port_info_get_reply.format.flags;
++
++	/* elementry stream format */
++	memcpy(&port->es,
++	       &rmsg->u.port_info_get_reply.es,
++	       sizeof(union mmal_es_specific_format));
++	port->format.es = &port->es;
++
++	port->format.extradata_size =
++	    rmsg->u.port_info_get_reply.format.extradata_size;
++	memcpy(port->format.extradata,
++	       rmsg->u.port_info_get_reply.extradata,
++	       port->format.extradata_size);
++
++	pr_debug("received port info\n");
++	dump_port_info(port);
++
++release_msg:
++
++	pr_debug("%s:result:%d component:0x%x port:%d\n",
++		 __func__, ret, port->component->handle, port->handle);
++
++	vchi_held_msg_release(&rmsg_handle);
++
++	return ret;
++}
++
++/* create comonent on vc */
++static int create_component(struct vchiq_mmal_instance *instance,
++			    struct vchiq_mmal_component *component,
++			    const char *name)
++{
++	int ret;
++	struct mmal_msg m;
++	struct mmal_msg *rmsg;
++	VCHI_HELD_MSG_T rmsg_handle;
++
++	/* build component create message */
++	m.h.type = MMAL_MSG_TYPE_COMPONENT_CREATE;
++	m.u.component_create.client_component = component;
++	strncpy(m.u.component_create.name, name,
++		sizeof(m.u.component_create.name));
++
++	ret = send_synchronous_mmal_msg(instance, &m,
++					sizeof(m.u.component_create),
++					&rmsg, &rmsg_handle);
++	if (ret)
++		return ret;
++
++	if (rmsg->h.type != m.h.type) {
++		/* got an unexpected message type in reply */
++		ret = -EINVAL;
++		goto release_msg;
++	}
++
++	ret = -rmsg->u.component_create_reply.status;
++	if (ret != MMAL_MSG_STATUS_SUCCESS)
++		goto release_msg;
++
++	/* a valid component response received */
++	component->handle = rmsg->u.component_create_reply.component_handle;
++	component->inputs = rmsg->u.component_create_reply.input_num;
++	component->outputs = rmsg->u.component_create_reply.output_num;
++	component->clocks = rmsg->u.component_create_reply.clock_num;
++
++	pr_debug("Component handle:0x%x in:%d out:%d clock:%d\n",
++		 component->handle,
++		 component->inputs, component->outputs, component->clocks);
++
++release_msg:
++	vchi_held_msg_release(&rmsg_handle);
++
++	return ret;
++}
++
++/* destroys a component on vc */
++static int destroy_component(struct vchiq_mmal_instance *instance,
++			     struct vchiq_mmal_component *component)
++{
++	int ret;
++	struct mmal_msg m;
++	struct mmal_msg *rmsg;
++	VCHI_HELD_MSG_T rmsg_handle;
++
++	m.h.type = MMAL_MSG_TYPE_COMPONENT_DESTROY;
++	m.u.component_destroy.component_handle = component->handle;
++
++	ret = send_synchronous_mmal_msg(instance, &m,
++					sizeof(m.u.component_destroy),
++					&rmsg, &rmsg_handle);
++	if (ret)
++		return ret;
++
++	if (rmsg->h.type != m.h.type) {
++		/* got an unexpected message type in reply */
++		ret = -EINVAL;
++		goto release_msg;
++	}
++
++	ret = -rmsg->u.component_destroy_reply.status;
++
++release_msg:
++
++	vchi_held_msg_release(&rmsg_handle);
++
++	return ret;
++}
++
++/* enable a component on vc */
++static int enable_component(struct vchiq_mmal_instance *instance,
++			    struct vchiq_mmal_component *component)
++{
++	int ret;
++	struct mmal_msg m;
++	struct mmal_msg *rmsg;
++	VCHI_HELD_MSG_T rmsg_handle;
++
++	m.h.type = MMAL_MSG_TYPE_COMPONENT_ENABLE;
++	m.u.component_enable.component_handle = component->handle;
++
++	ret = send_synchronous_mmal_msg(instance, &m,
++					sizeof(m.u.component_enable),
++					&rmsg, &rmsg_handle);
++	if (ret)
++		return ret;
++
++	if (rmsg->h.type != m.h.type) {
++		/* got an unexpected message type in reply */
++		ret = -EINVAL;
++		goto release_msg;
++	}
++
++	ret = -rmsg->u.component_enable_reply.status;
++
++release_msg:
++	vchi_held_msg_release(&rmsg_handle);
++
++	return ret;
++}
++
++/* disable a component on vc */
++static int disable_component(struct vchiq_mmal_instance *instance,
++			     struct vchiq_mmal_component *component)
++{
++	int ret;
++	struct mmal_msg m;
++	struct mmal_msg *rmsg;
++	VCHI_HELD_MSG_T rmsg_handle;
++
++	m.h.type = MMAL_MSG_TYPE_COMPONENT_DISABLE;
++	m.u.component_disable.component_handle = component->handle;
++
++	ret = send_synchronous_mmal_msg(instance, &m,
++					sizeof(m.u.component_disable),
++					&rmsg, &rmsg_handle);
++	if (ret)
++		return ret;
++
++	if (rmsg->h.type != m.h.type) {
++		/* got an unexpected message type in reply */
++		ret = -EINVAL;
++		goto release_msg;
++	}
++
++	ret = -rmsg->u.component_disable_reply.status;
++
++release_msg:
++
++	vchi_held_msg_release(&rmsg_handle);
++
++	return ret;
++}
++
++/* get version of mmal implementation */
++static int get_version(struct vchiq_mmal_instance *instance,
++		       u32 *major_out, u32 *minor_out)
++{
++	int ret;
++	struct mmal_msg m;
++	struct mmal_msg *rmsg;
++	VCHI_HELD_MSG_T rmsg_handle;
++
++	m.h.type = MMAL_MSG_TYPE_GET_VERSION;
++
++	ret = send_synchronous_mmal_msg(instance, &m,
++					sizeof(m.u.version),
++					&rmsg, &rmsg_handle);
++	if (ret)
++		return ret;
++
++	if (rmsg->h.type != m.h.type) {
++		/* got an unexpected message type in reply */
++		ret = -EINVAL;
++		goto release_msg;
++	}
++
++	*major_out = rmsg->u.version.major;
++	*minor_out = rmsg->u.version.minor;
++
++release_msg:
++	vchi_held_msg_release(&rmsg_handle);
++
++	return ret;
++}
++
++/* do a port action with a port as a parameter */
++static int port_action_port(struct vchiq_mmal_instance *instance,
++			    struct vchiq_mmal_port *port,
++			    enum mmal_msg_port_action_type action_type)
++{
++	int ret;
++	struct mmal_msg m;
++	struct mmal_msg *rmsg;
++	VCHI_HELD_MSG_T rmsg_handle;
++
++	m.h.type = MMAL_MSG_TYPE_PORT_ACTION;
++	m.u.port_action_port.component_handle = port->component->handle;
++	m.u.port_action_port.port_handle = port->handle;
++	m.u.port_action_port.action = action_type;
++
++	port_to_mmal_msg(port, &m.u.port_action_port.port);
++
++	ret = send_synchronous_mmal_msg(instance, &m,
++					sizeof(m.u.port_action_port),
++					&rmsg, &rmsg_handle);
++	if (ret)
++		return ret;
++
++	if (rmsg->h.type != MMAL_MSG_TYPE_PORT_ACTION) {
++		/* got an unexpected message type in reply */
++		ret = -EINVAL;
++		goto release_msg;
++	}
++
++	ret = -rmsg->u.port_action_reply.status;
++
++	pr_debug("%s:result:%d component:0x%x port:%d action:%s(%d)\n",
++		 __func__,
++		 ret, port->component->handle, port->handle,
++		 port_action_type_names[action_type], action_type);
++
++release_msg:
++	vchi_held_msg_release(&rmsg_handle);
++
++	return ret;
++}
++
++/* do a port action with handles as parameters */
++static int port_action_handle(struct vchiq_mmal_instance *instance,
++			      struct vchiq_mmal_port *port,
++			      enum mmal_msg_port_action_type action_type,
++			      u32 connect_component_handle,
++			      u32 connect_port_handle)
++{
++	int ret;
++	struct mmal_msg m;
++	struct mmal_msg *rmsg;
++	VCHI_HELD_MSG_T rmsg_handle;
++
++	m.h.type = MMAL_MSG_TYPE_PORT_ACTION;
++
++	m.u.port_action_handle.component_handle = port->component->handle;
++	m.u.port_action_handle.port_handle = port->handle;
++	m.u.port_action_handle.action = action_type;
++
++	m.u.port_action_handle.connect_component_handle =
++	    connect_component_handle;
++	m.u.port_action_handle.connect_port_handle = connect_port_handle;
++
++	ret = send_synchronous_mmal_msg(instance, &m,
++					sizeof(m.u.port_action_handle),
++					&rmsg, &rmsg_handle);
++	if (ret)
++		return ret;
++
++	if (rmsg->h.type != MMAL_MSG_TYPE_PORT_ACTION) {
++		/* got an unexpected message type in reply */
++		ret = -EINVAL;
++		goto release_msg;
++	}
++
++	ret = -rmsg->u.port_action_reply.status;
++
++	pr_debug("%s:result:%d component:0x%x port:%d action:%s(%d)" \
++		 " connect component:0x%x connect port:%d\n",
++		 __func__,
++		 ret, port->component->handle, port->handle,
++		 port_action_type_names[action_type],
++		 action_type, connect_component_handle, connect_port_handle);
++
++release_msg:
++	vchi_held_msg_release(&rmsg_handle);
++
++	return ret;
++}
++
++static int port_parameter_set(struct vchiq_mmal_instance *instance,
++			      struct vchiq_mmal_port *port,
++			      u32 parameter_id, void *value, u32 value_size)
++{
++	int ret;
++	struct mmal_msg m;
++	struct mmal_msg *rmsg;
++	VCHI_HELD_MSG_T rmsg_handle;
++
++	m.h.type = MMAL_MSG_TYPE_PORT_PARAMETER_SET;
++
++	m.u.port_parameter_set.component_handle = port->component->handle;
++	m.u.port_parameter_set.port_handle = port->handle;
++	m.u.port_parameter_set.id = parameter_id;
++	m.u.port_parameter_set.size = (2 * sizeof(u32)) + value_size;
++	memcpy(&m.u.port_parameter_set.value, value, value_size);
++
++	ret = send_synchronous_mmal_msg(instance, &m,
++					(4 * sizeof(u32)) + value_size,
++					&rmsg, &rmsg_handle);
++	if (ret)
++		return ret;
++
++	if (rmsg->h.type != MMAL_MSG_TYPE_PORT_PARAMETER_SET) {
++		/* got an unexpected message type in reply */
++		ret = -EINVAL;
++		goto release_msg;
++	}
++
++	ret = -rmsg->u.port_parameter_set_reply.status;
++
++	pr_debug("%s:result:%d component:0x%x port:%d parameter:%d\n",
++		 __func__,
++		 ret, port->component->handle, port->handle, parameter_id);
++
++release_msg:
++	vchi_held_msg_release(&rmsg_handle);
++
++	return ret;
++}
++
++static int port_parameter_get(struct vchiq_mmal_instance *instance,
++			      struct vchiq_mmal_port *port,
++			      u32 parameter_id, void *value, u32 *value_size)
++{
++	int ret;
++	struct mmal_msg m;
++	struct mmal_msg *rmsg;
++	VCHI_HELD_MSG_T rmsg_handle;
++
++	m.h.type = MMAL_MSG_TYPE_PORT_PARAMETER_GET;
++
++	m.u.port_parameter_get.component_handle = port->component->handle;
++	m.u.port_parameter_get.port_handle = port->handle;
++	m.u.port_parameter_get.id = parameter_id;
++	m.u.port_parameter_get.size = (2 * sizeof(u32)) + *value_size;
++
++	ret = send_synchronous_mmal_msg(instance, &m,
++					sizeof(struct
++					       mmal_msg_port_parameter_get),
++					&rmsg, &rmsg_handle);
++	if (ret)
++		return ret;
++
++	if (rmsg->h.type != MMAL_MSG_TYPE_PORT_PARAMETER_GET) {
++		/* got an unexpected message type in reply */
++		pr_err("Incorrect reply type %d\n", rmsg->h.type);
++		ret = -EINVAL;
++		goto release_msg;
++	}
++
++	ret = -rmsg->u.port_parameter_get_reply.status;
++	if (ret) {
++		/* Copy only as much as we have space for
++		 * but report true size of parameter
++		 */
++		memcpy(value, &rmsg->u.port_parameter_get_reply.value,
++		       *value_size);
++		*value_size = rmsg->u.port_parameter_get_reply.size;
++	} else
++		memcpy(value, &rmsg->u.port_parameter_get_reply.value,
++		       rmsg->u.port_parameter_get_reply.size);
++
++	pr_info("%s:result:%d component:0x%x port:%d parameter:%d\n", __func__,
++	        ret, port->component->handle, port->handle, parameter_id);
++
++release_msg:
++	vchi_held_msg_release(&rmsg_handle);
++
++	return ret;
++}
++
++/* disables a port and drains buffers from it */
++static int port_disable(struct vchiq_mmal_instance *instance,
++			struct vchiq_mmal_port *port)
++{
++	int ret;
++	struct list_head *q, *buf_head;
++	unsigned long flags = 0;
++
++	if (!port->enabled)
++		return 0;
++
++	port->enabled = false;
++
++	ret = port_action_port(instance, port,
++			       MMAL_MSG_PORT_ACTION_TYPE_DISABLE);
++	if (ret == 0) {
++
++		/* drain all queued buffers on port */
++		spin_lock_irqsave(&port->slock, flags);
++
++		list_for_each_safe(buf_head, q, &port->buffers) {
++			struct mmal_buffer *mmalbuf;
++			mmalbuf = list_entry(buf_head, struct mmal_buffer,
++					     list);
++			list_del(buf_head);
++			if (port->buffer_cb)
++				port->buffer_cb(instance,
++						port, 0, mmalbuf, 0, 0,
++						MMAL_TIME_UNKNOWN,
++						MMAL_TIME_UNKNOWN);
++		}
++
++		spin_unlock_irqrestore(&port->slock, flags);
++
++		ret = port_info_get(instance, port);
++	}
++
++	return ret;
++}
++
++/* enable a port */
++static int port_enable(struct vchiq_mmal_instance *instance,
++		       struct vchiq_mmal_port *port)
++{
++	unsigned int hdr_count;
++	struct list_head *buf_head;
++	int ret;
++
++	if (port->enabled)
++		return 0;
++
++	/* ensure there are enough buffers queued to cover the buffer headers */
++	if (port->buffer_cb != NULL) {
++		hdr_count = 0;
++		list_for_each(buf_head, &port->buffers) {
++			hdr_count++;
++		}
++		if (hdr_count < port->current_buffer.num)
++			return -ENOSPC;
++	}
++
++	ret = port_action_port(instance, port,
++			       MMAL_MSG_PORT_ACTION_TYPE_ENABLE);
++	if (ret)
++		goto done;
++
++	port->enabled = true;
++
++	if (port->buffer_cb) {
++		/* send buffer headers to videocore */
++		hdr_count = 1;
++		list_for_each(buf_head, &port->buffers) {
++			struct mmal_buffer *mmalbuf;
++			mmalbuf = list_entry(buf_head, struct mmal_buffer,
++					     list);
++			ret = buffer_from_host(instance, port, mmalbuf);
++			if (ret)
++				goto done;
++
++			hdr_count++;
++			if (hdr_count > port->current_buffer.num)
++				break;
++		}
++	}
++
++	ret = port_info_get(instance, port);
++
++done:
++	return ret;
++}
++
++/* ------------------------------------------------------------------
++ * Exported API
++ *------------------------------------------------------------------*/
++
++int vchiq_mmal_port_set_format(struct vchiq_mmal_instance *instance,
++			       struct vchiq_mmal_port *port)
++{
++	int ret;
++
++	if (mutex_lock_interruptible(&instance->vchiq_mutex))
++		return -EINTR;
++
++	ret = port_info_set(instance, port);
++	if (ret)
++		goto release_unlock;
++
++	/* read what has actually been set */
++	ret = port_info_get(instance, port);
++
++release_unlock:
++	mutex_unlock(&instance->vchiq_mutex);
++
++	return ret;
++
++}
++
++int vchiq_mmal_port_parameter_set(struct vchiq_mmal_instance *instance,
++				  struct vchiq_mmal_port *port,
++				  u32 parameter, void *value, u32 value_size)
++{
++	int ret;
++
++	if (mutex_lock_interruptible(&instance->vchiq_mutex))
++		return -EINTR;
++
++	ret = port_parameter_set(instance, port, parameter, value, value_size);
++
++	mutex_unlock(&instance->vchiq_mutex);
++
++	return ret;
++}
++
++int vchiq_mmal_port_parameter_get(struct vchiq_mmal_instance *instance,
++				  struct vchiq_mmal_port *port,
++				  u32 parameter, void *value, u32 *value_size)
++{
++	int ret;
++
++	if (mutex_lock_interruptible(&instance->vchiq_mutex))
++		return -EINTR;
++
++	ret = port_parameter_get(instance, port, parameter, value, value_size);
++
++	mutex_unlock(&instance->vchiq_mutex);
++
++	return ret;
++}
++
++/* enable a port
++ *
++ * enables a port and queues buffers for satisfying callbacks if we
++ * provide a callback handler
++ */
++int vchiq_mmal_port_enable(struct vchiq_mmal_instance *instance,
++			   struct vchiq_mmal_port *port,
++			   vchiq_mmal_buffer_cb buffer_cb)
++{
++	int ret;
++
++	if (mutex_lock_interruptible(&instance->vchiq_mutex))
++		return -EINTR;
++
++	/* already enabled - noop */
++	if (port->enabled) {
++		ret = 0;
++		goto unlock;
++	}
++
++	port->buffer_cb = buffer_cb;
++
++	ret = port_enable(instance, port);
++
++unlock:
++	mutex_unlock(&instance->vchiq_mutex);
++
++	return ret;
++}
++
++int vchiq_mmal_port_disable(struct vchiq_mmal_instance *instance,
++			    struct vchiq_mmal_port *port)
++{
++	int ret;
++
++	if (mutex_lock_interruptible(&instance->vchiq_mutex))
++		return -EINTR;
++
++	if (!port->enabled) {
++		mutex_unlock(&instance->vchiq_mutex);
++		return 0;
++	}
++
++	ret = port_disable(instance, port);
++
++	mutex_unlock(&instance->vchiq_mutex);
++
++	return ret;
++}
++
++/* ports will be connected in a tunneled manner so data buffers
++ * are not handled by client.
++ */
++int vchiq_mmal_port_connect_tunnel(struct vchiq_mmal_instance *instance,
++				   struct vchiq_mmal_port *src,
++				   struct vchiq_mmal_port *dst)
++{
++	int ret;
++
++	if (mutex_lock_interruptible(&instance->vchiq_mutex))
++		return -EINTR;
++
++	/* disconnect ports if connected */
++	if (src->connected != NULL) {
++		ret = port_disable(instance, src);
++		if (ret) {
++			pr_err("failed disabling src port(%d)\n", ret);
++			goto release_unlock;
++		}
++
++		/* do not need to disable the destination port as they
++		 * are connected and it is done automatically
++		 */
++
++		ret = port_action_handle(instance, src,
++					 MMAL_MSG_PORT_ACTION_TYPE_DISCONNECT,
++					 src->connected->component->handle,
++					 src->connected->handle);
++		if (ret < 0) {
++			pr_err("failed disconnecting src port\n");
++			goto release_unlock;
++		}
++		src->connected->enabled = false;
++		src->connected = NULL;
++	}
++
++	if (dst == NULL) {
++		/* do not make new connection */
++		ret = 0;
++		pr_debug("not making new connection\n");
++		goto release_unlock;
++	}
++
++	/* copy src port format to dst */
++	dst->format.encoding = src->format.encoding;
++	dst->es.video.width = src->es.video.width;
++	dst->es.video.height = src->es.video.height;
++	dst->es.video.crop.x = src->es.video.crop.x;
++	dst->es.video.crop.y = src->es.video.crop.y;
++	dst->es.video.crop.width = src->es.video.crop.width;
++	dst->es.video.crop.height = src->es.video.crop.height;
++	dst->es.video.frame_rate.num = src->es.video.frame_rate.num;
++	dst->es.video.frame_rate.den = src->es.video.frame_rate.den;
++
++	/* set new format */
++	ret = port_info_set(instance, dst);
++	if (ret) {
++		pr_debug("setting port info failed\n");
++		goto release_unlock;
++	}
++
++	/* read what has actually been set */
++	ret = port_info_get(instance, dst);
++	if (ret) {
++		pr_debug("read back port info failed\n");
++		goto release_unlock;
++	}
++
++	/* connect two ports together */
++	ret = port_action_handle(instance, src,
++				 MMAL_MSG_PORT_ACTION_TYPE_CONNECT,
++				 dst->component->handle, dst->handle);
++	if (ret < 0) {
++		pr_debug("connecting port %d:%d to %d:%d failed\n",
++			 src->component->handle, src->handle,
++			 dst->component->handle, dst->handle);
++		goto release_unlock;
++	}
++	src->connected = dst;
++
++release_unlock:
++
++	mutex_unlock(&instance->vchiq_mutex);
++
++	return ret;
++}
++
++int vchiq_mmal_submit_buffer(struct vchiq_mmal_instance *instance,
++			     struct vchiq_mmal_port *port,
++			     struct mmal_buffer *buffer)
++{
++	unsigned long flags = 0;
++
++	spin_lock_irqsave(&port->slock, flags);
++	list_add_tail(&buffer->list, &port->buffers);
++	spin_unlock_irqrestore(&port->slock, flags);
++
++	/* the port previously underflowed because it was missing a
++	 * mmal_buffer which has just been added, submit that buffer
++	 * to the mmal service.
++	 */
++	if (port->buffer_underflow) {
++		port_buffer_from_host(instance, port);
++		port->buffer_underflow--;
++	}
++
++	return 0;
++}
++
++/* Initialise a mmal component and its ports
++ *
++ */
++int vchiq_mmal_component_init(struct vchiq_mmal_instance *instance,
++			      const char *name,
++			      struct vchiq_mmal_component **component_out)
++{
++	int ret;
++	int idx;		/* port index */
++	struct vchiq_mmal_component *component;
++
++	if (mutex_lock_interruptible(&instance->vchiq_mutex))
++		return -EINTR;
++
++	if (instance->component_idx == VCHIQ_MMAL_MAX_COMPONENTS) {
++		ret = -EINVAL;	/* todo is this correct error? */
++		goto unlock;
++	}
++
++	component = &instance->component[instance->component_idx];
++
++	ret = create_component(instance, component, name);
++	if (ret < 0)
++		goto unlock;
++
++	/* ports info needs gathering */
++	component->control.type = MMAL_PORT_TYPE_CONTROL;
++	component->control.index = 0;
++	component->control.component = component;
++	spin_lock_init(&component->control.slock);
++	INIT_LIST_HEAD(&component->control.buffers);
++	ret = port_info_get(instance, &component->control);
++	if (ret < 0)
++		goto release_component;
++
++	for (idx = 0; idx < component->inputs; idx++) {
++		component->input[idx].type = MMAL_PORT_TYPE_INPUT;
++		component->input[idx].index = idx;
++		component->input[idx].component = component;
++		spin_lock_init(&component->input[idx].slock);
++		INIT_LIST_HEAD(&component->input[idx].buffers);
++		ret = port_info_get(instance, &component->input[idx]);
++		if (ret < 0)
++			goto release_component;
++	}
++
++	for (idx = 0; idx < component->outputs; idx++) {
++		component->output[idx].type = MMAL_PORT_TYPE_OUTPUT;
++		component->output[idx].index = idx;
++		component->output[idx].component = component;
++		spin_lock_init(&component->output[idx].slock);
++		INIT_LIST_HEAD(&component->output[idx].buffers);
++		ret = port_info_get(instance, &component->output[idx]);
++		if (ret < 0)
++			goto release_component;
++	}
++
++	for (idx = 0; idx < component->clocks; idx++) {
++		component->clock[idx].type = MMAL_PORT_TYPE_CLOCK;
++		component->clock[idx].index = idx;
++		component->clock[idx].component = component;
++		spin_lock_init(&component->clock[idx].slock);
++		INIT_LIST_HEAD(&component->clock[idx].buffers);
++		ret = port_info_get(instance, &component->clock[idx]);
++		if (ret < 0)
++			goto release_component;
++	}
++
++	instance->component_idx++;
++
++	*component_out = component;
++
++	mutex_unlock(&instance->vchiq_mutex);
++
++	return 0;
++
++release_component:
++	destroy_component(instance, component);
++unlock:
++	mutex_unlock(&instance->vchiq_mutex);
++
++	return ret;
++}
++
++/*
++ * cause a mmal component to be destroyed
++ */
++int vchiq_mmal_component_finalise(struct vchiq_mmal_instance *instance,
++				  struct vchiq_mmal_component *component)
++{
++	int ret;
++
++	if (mutex_lock_interruptible(&instance->vchiq_mutex))
++		return -EINTR;
++
++	if (component->enabled)
++		ret = disable_component(instance, component);
++
++	ret = destroy_component(instance, component);
++
++	mutex_unlock(&instance->vchiq_mutex);
++
++	return ret;
++}
++
++/*
++ * cause a mmal component to be enabled
++ */
++int vchiq_mmal_component_enable(struct vchiq_mmal_instance *instance,
++				struct vchiq_mmal_component *component)
++{
++	int ret;
++
++	if (mutex_lock_interruptible(&instance->vchiq_mutex))
++		return -EINTR;
++
++	if (component->enabled) {
++		mutex_unlock(&instance->vchiq_mutex);
++		return 0;
++	}
++
++	ret = enable_component(instance, component);
++	if (ret == 0)
++		component->enabled = true;
++
++	mutex_unlock(&instance->vchiq_mutex);
++
++	return ret;
++}
++
++/*
++ * cause a mmal component to be enabled
++ */
++int vchiq_mmal_component_disable(struct vchiq_mmal_instance *instance,
++				 struct vchiq_mmal_component *component)
++{
++	int ret;
++
++	if (mutex_lock_interruptible(&instance->vchiq_mutex))
++		return -EINTR;
++
++	if (!component->enabled) {
++		mutex_unlock(&instance->vchiq_mutex);
++		return 0;
++	}
++
++	ret = disable_component(instance, component);
++	if (ret == 0)
++		component->enabled = false;
++
++	mutex_unlock(&instance->vchiq_mutex);
++
++	return ret;
++}
++
++int vchiq_mmal_version(struct vchiq_mmal_instance *instance,
++		       u32 *major_out, u32 *minor_out)
++{
++	int ret;
++
++	if (mutex_lock_interruptible(&instance->vchiq_mutex))
++		return -EINTR;
++
++	ret = get_version(instance, major_out, minor_out);
++
++	mutex_unlock(&instance->vchiq_mutex);
++
++	return ret;
++}
++
++int vchiq_mmal_finalise(struct vchiq_mmal_instance *instance)
++{
++	int status = 0;
++
++	if (instance == NULL)
++		return -EINVAL;
++
++	if (mutex_lock_interruptible(&instance->vchiq_mutex))
++		return -EINTR;
++
++	vchi_service_use(instance->handle);
++
++	status = vchi_service_close(instance->handle);
++	if (status != 0)
++		pr_err("mmal-vchiq: VCHIQ close failed");
++
++	mutex_unlock(&instance->vchiq_mutex);
++
++	vfree(instance->bulk_scratch);
++
++	kfree(instance);
++
++	return status;
++}
++
++int vchiq_mmal_init(struct vchiq_mmal_instance **out_instance)
++{
++	int status;
++	struct vchiq_mmal_instance *instance;
++	static VCHI_CONNECTION_T *vchi_connection;
++	static VCHI_INSTANCE_T vchi_instance;
++	SERVICE_CREATION_T params = {
++		VCHI_VERSION_EX(VC_MMAL_VER, VC_MMAL_MIN_VER),
++		VC_MMAL_SERVER_NAME,
++		vchi_connection,
++		0,		/* rx fifo size (unused) */
++		0,		/* tx fifo size (unused) */
++		service_callback,
++		NULL,		/* service callback parameter */
++		1,		/* unaligned bulk receives */
++		1,		/* unaligned bulk transmits */
++		0		/* want crc check on bulk transfers */
++	};
++
++	/* compile time checks to ensure structure size as they are
++	 * directly (de)serialised from memory.
++	 */
++
++	/* ensure the header structure has packed to the correct size */
++	BUILD_BUG_ON(sizeof(struct mmal_msg_header) != 24);
++
++	/* ensure message structure does not exceed maximum length */
++	BUILD_BUG_ON(sizeof(struct mmal_msg) > MMAL_MSG_MAX_SIZE);
++
++	/* mmal port struct is correct size */
++	BUILD_BUG_ON(sizeof(struct mmal_port) != 64);
++
++	/* create a vchi instance */
++	status = vchi_initialise(&vchi_instance);
++	if (status) {
++		pr_err("Failed to initialise VCHI instance (status=%d)\n",
++		       status);
++		return -EIO;
++	}
++
++	status = vchi_connect(NULL, 0, vchi_instance);
++	if (status) {
++		pr_err("Failed to connect VCHI instance (status=%d)\n", status);
++		return -EIO;
++	}
++
++	instance = kmalloc(sizeof(*instance), GFP_KERNEL);
++	memset(instance, 0, sizeof(*instance));
++
++	mutex_init(&instance->vchiq_mutex);
++	mutex_init(&instance->bulk_mutex);
++
++	instance->bulk_scratch = vmalloc(PAGE_SIZE);
++
++	params.callback_param = instance;
++
++	status = vchi_service_open(vchi_instance, &params, &instance->handle);
++	if (status) {
++		pr_err("Failed to open VCHI service connection (status=%d)\n",
++		       status);
++		goto err_close_services;
++	}
++
++	vchi_service_release(instance->handle);
++
++	*out_instance = instance;
++
++	return 0;
++
++err_close_services:
++
++	vchi_service_close(instance->handle);
++	vfree(instance->bulk_scratch);
++	kfree(instance);
++	return -ENODEV;
++}
+diff -Nur linux-3.12.6/drivers/media/platform/bcm2835/mmal-vchiq.h linux-raspberry-pi/drivers/media/platform/bcm2835/mmal-vchiq.h
+--- linux-3.12.6/drivers/media/platform/bcm2835/mmal-vchiq.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/media/platform/bcm2835/mmal-vchiq.h	2013-12-29 10:40:41.000000000 +0100
+@@ -0,0 +1,178 @@
++/*
++ * Broadcom BM2835 V4L2 driver
++ *
++ * Copyright © 2013 Raspberry Pi (Trading) Ltd.
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file COPYING in the main directory of this archive
++ * for more details.
++ *
++ * Authors: Vincent Sanders <vincent.sanders@collabora.co.uk>
++ *          Dave Stevenson <dsteve@broadcom.com>
++ *          Simon Mellor <simellor@broadcom.com>
++ *          Luke Diamand <luked@broadcom.com>
++ *
++ * MMAL interface to VCHIQ message passing
++ */
++
++#ifndef MMAL_VCHIQ_H
++#define MMAL_VCHIQ_H
++
++#include "mmal-msg-format.h"
++
++#define MAX_PORT_COUNT 4
++
++/* Maximum size of the format extradata. */
++#define MMAL_FORMAT_EXTRADATA_MAX_SIZE 128
++
++struct vchiq_mmal_instance;
++
++enum vchiq_mmal_es_type {
++	MMAL_ES_TYPE_UNKNOWN,     /**< Unknown elementary stream type */
++	MMAL_ES_TYPE_CONTROL,     /**< Elementary stream of control commands */
++	MMAL_ES_TYPE_AUDIO,       /**< Audio elementary stream */
++	MMAL_ES_TYPE_VIDEO,       /**< Video elementary stream */
++	MMAL_ES_TYPE_SUBPICTURE   /**< Sub-picture elementary stream */
++};
++
++/* rectangle, used lots so it gets its own struct */
++struct vchiq_mmal_rect {
++	s32 x;
++	s32 y;
++	s32 width;
++	s32 height;
++};
++
++struct vchiq_mmal_port_buffer {
++	unsigned int num; /* number of buffers */
++	u32 size; /* size of buffers */
++	u32 alignment; /* alignment of buffers */
++};
++
++struct vchiq_mmal_port;
++
++typedef void (*vchiq_mmal_buffer_cb)(
++		struct vchiq_mmal_instance  *instance,
++		struct vchiq_mmal_port *port,
++		int status, struct mmal_buffer *buffer,
++		unsigned long length, u32 mmal_flags, s64 dts, s64 pts);
++
++struct vchiq_mmal_port {
++	bool enabled;
++	u32 handle;
++	u32 type; /* port type, cached to use on port info set */
++	u32 index; /* port index, cached to use on port info set */
++
++	/* component port belongs to, allows simple deref */
++	struct vchiq_mmal_component *component;
++
++	struct vchiq_mmal_port *connected; /* port conencted to */
++
++	/* buffer info */
++	struct vchiq_mmal_port_buffer minimum_buffer;
++	struct vchiq_mmal_port_buffer recommended_buffer;
++	struct vchiq_mmal_port_buffer current_buffer;
++
++	/* stream format */
++	struct mmal_es_format format;
++	/* elementry stream format */
++	union mmal_es_specific_format es;
++
++	/* data buffers to fill */
++	struct list_head buffers;
++	/* lock to serialise adding and removing buffers from list */
++	spinlock_t slock;
++	/* count of how many buffer header refils have failed because
++	 * there was no buffer to satisfy them
++	 */
++	int buffer_underflow;
++	/* callback on buffer completion */
++	vchiq_mmal_buffer_cb buffer_cb;
++	/* callback context */
++	void *cb_ctx;
++};
++
++struct vchiq_mmal_component {
++	bool enabled;
++	u32 handle;  /* VideoCore handle for component */
++	u32 inputs;  /* Number of input ports */
++	u32 outputs; /* Number of output ports */
++	u32 clocks;  /* Number of clock ports */
++	struct vchiq_mmal_port control; /* control port */
++	struct vchiq_mmal_port input[MAX_PORT_COUNT]; /* input ports */
++	struct vchiq_mmal_port output[MAX_PORT_COUNT]; /* output ports */
++	struct vchiq_mmal_port clock[MAX_PORT_COUNT]; /* clock ports */
++};
++
++
++int vchiq_mmal_init(struct vchiq_mmal_instance **out_instance);
++int vchiq_mmal_finalise(struct vchiq_mmal_instance *instance);
++
++/* Initialise a mmal component and its ports
++*
++*/
++int vchiq_mmal_component_init(
++		struct vchiq_mmal_instance *instance,
++		const char *name,
++		struct vchiq_mmal_component **component_out);
++
++int vchiq_mmal_component_finalise(
++		struct vchiq_mmal_instance *instance,
++		struct vchiq_mmal_component *component);
++
++int vchiq_mmal_component_enable(
++		struct vchiq_mmal_instance *instance,
++		struct vchiq_mmal_component *component);
++
++int vchiq_mmal_component_disable(
++		struct vchiq_mmal_instance *instance,
++		struct vchiq_mmal_component *component);
++
++
++
++/* enable a mmal port
++ *
++ * enables a port and if a buffer callback provided enque buffer
++ * headers as apropriate for the port.
++ */
++int vchiq_mmal_port_enable(
++		struct vchiq_mmal_instance *instance,
++		struct vchiq_mmal_port *port,
++		vchiq_mmal_buffer_cb buffer_cb);
++
++/* disable a port
++ *
++ * disable a port will dequeue any pending buffers
++ */
++int vchiq_mmal_port_disable(struct vchiq_mmal_instance *instance,
++			   struct vchiq_mmal_port *port);
++
++
++int vchiq_mmal_port_parameter_set(struct vchiq_mmal_instance *instance,
++				  struct vchiq_mmal_port *port,
++				  u32 parameter,
++				  void *value,
++				  u32 value_size);
++
++int vchiq_mmal_port_parameter_get(struct vchiq_mmal_instance *instance,
++				  struct vchiq_mmal_port *port,
++				  u32 parameter,
++				  void *value,
++				  u32 *value_size);
++
++int vchiq_mmal_port_set_format(struct vchiq_mmal_instance *instance,
++			       struct vchiq_mmal_port *port);
++
++int vchiq_mmal_port_connect_tunnel(struct vchiq_mmal_instance *instance,
++			    struct vchiq_mmal_port *src,
++			    struct vchiq_mmal_port *dst);
++
++int vchiq_mmal_version(struct vchiq_mmal_instance *instance,
++		       u32 *major_out,
++		       u32 *minor_out);
++
++int vchiq_mmal_submit_buffer(struct vchiq_mmal_instance *instance,
++			     struct vchiq_mmal_port *port,
++			     struct mmal_buffer *buf);
++
++#endif /* MMAL_VCHIQ_H */
+diff -Nur linux-3.12.6/drivers/media/platform/Kconfig linux-raspberry-pi/drivers/media/platform/Kconfig
+--- linux-3.12.6/drivers/media/platform/Kconfig	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/media/platform/Kconfig	2013-12-29 10:40:41.000000000 +0100
+@@ -124,6 +124,7 @@
+ source "drivers/media/platform/soc_camera/Kconfig"
+ source "drivers/media/platform/exynos4-is/Kconfig"
+ source "drivers/media/platform/s5p-tv/Kconfig"
++source "drivers/media/platform/bcm2835/Kconfig"
+ 
+ endif # V4L_PLATFORM_DRIVERS
+ 
+diff -Nur linux-3.12.6/drivers/media/platform/Makefile linux-raspberry-pi/drivers/media/platform/Makefile
+--- linux-3.12.6/drivers/media/platform/Makefile	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/media/platform/Makefile	2013-12-29 10:40:41.000000000 +0100
+@@ -52,4 +52,6 @@
+ 
+ obj-$(CONFIG_ARCH_OMAP)	+= omap/
+ 
++obj-$(CONFIG_VIDEO_BCM2835)		+= bcm2835/
++
+ ccflags-y += -I$(srctree)/drivers/media/i2c
+diff -Nur linux-3.12.6/drivers/media/usb/dvb-usb-v2/az6007.c linux-raspberry-pi/drivers/media/usb/dvb-usb-v2/az6007.c
+--- linux-3.12.6/drivers/media/usb/dvb-usb-v2/az6007.c	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/media/usb/dvb-usb-v2/az6007.c	2013-12-29 10:40:47.000000000 +0100
+@@ -68,6 +68,19 @@
+ 	.microcode_name = "dvb-usb-terratec-h7-drxk.fw",
+ };
+ 
++static struct drxk_config cablestar_hdci_drxk = {
++	.adr = 0x29,
++	.parallel_ts = true,
++	.dynamic_clk = true,
++	.single_master = true,
++	.enable_merr_cfg = true,
++	.no_i2c_bridge = false,
++	.chunk_size = 64,
++	.mpeg_out_clk_strength = 0x02,
++	.qam_demod_parameter_count = 2,
++	.microcode_name = "dvb-usb-technisat-cablestar-hdci-drxk.fw",
++};
++
+ static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
+ {
+ 	struct az6007_device_state *st = fe_to_priv(fe);
+@@ -630,6 +643,27 @@
+ 	return 0;
+ }
+ 
++static int az6007_cablestar_hdci_frontend_attach(struct dvb_usb_adapter *adap)
++{
++	struct az6007_device_state *st = adap_to_priv(adap);
++	struct dvb_usb_device *d = adap_to_d(adap);
++
++	pr_debug("attaching demod drxk\n");
++
++	adap->fe[0] = dvb_attach(drxk_attach, &cablestar_hdci_drxk,
++				 &d->i2c_adap);
++	if (!adap->fe[0])
++		return -EINVAL;
++
++	adap->fe[0]->sec_priv = adap;
++	st->gate_ctrl = adap->fe[0]->ops.i2c_gate_ctrl;
++	adap->fe[0]->ops.i2c_gate_ctrl = drxk_gate_ctrl;
++
++	az6007_ci_init(adap);
++
++	return 0;
++}
++
+ static int az6007_tuner_attach(struct dvb_usb_adapter *adap)
+ {
+ 	struct dvb_usb_device *d = adap_to_d(adap);
+@@ -868,6 +902,29 @@
+ 	}
+ };
+ 
++static struct dvb_usb_device_properties az6007_cablestar_hdci_props = {
++	.driver_name         = KBUILD_MODNAME,
++	.owner               = THIS_MODULE,
++	.firmware            = AZ6007_FIRMWARE,
++
++	.adapter_nr          = adapter_nr,
++	.size_of_priv        = sizeof(struct az6007_device_state),
++	.i2c_algo            = &az6007_i2c_algo,
++	.tuner_attach        = az6007_tuner_attach,
++	.frontend_attach     = az6007_cablestar_hdci_frontend_attach,
++	.streaming_ctrl      = az6007_streaming_ctrl,
++/* ditch get_rc_config as it can't work (TS35 remote, I believe it's rc5) */
++	.get_rc_config       = NULL,
++	.read_mac_address    = az6007_read_mac_addr,
++	.download_firmware   = az6007_download_firmware,
++	.identify_state	     = az6007_identify_state,
++	.power_ctrl          = az6007_power_ctrl,
++	.num_adapters        = 1,
++	.adapter             = {
++		{ .stream = DVB_USB_STREAM_BULK(0x02, 10, 4096), }
++	}
++};
++
+ static struct usb_device_id az6007_usb_table[] = {
+ 	{DVB_USB_DEVICE(USB_VID_AZUREWAVE, USB_PID_AZUREWAVE_6007,
+ 		&az6007_props, "Azurewave 6007", RC_MAP_EMPTY)},
+@@ -875,6 +932,8 @@
+ 		&az6007_props, "Terratec H7", RC_MAP_NEC_TERRATEC_CINERGY_XS)},
+ 	{DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_H7_2,
+ 		&az6007_props, "Terratec H7", RC_MAP_NEC_TERRATEC_CINERGY_XS)},
++	{DVB_USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_CABLESTAR_HDCI,
++		&az6007_cablestar_hdci_props, "Technisat CableStar Combo HD CI", RC_MAP_EMPTY)},
+ 	{0},
+ };
+ 
+diff -Nur linux-3.12.6/drivers/media/usb/dvb-usb-v2/rtl28xxu.c linux-raspberry-pi/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
+--- linux-3.12.6/drivers/media/usb/dvb-usb-v2/rtl28xxu.c	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/media/usb/dvb-usb-v2/rtl28xxu.c	2013-12-29 10:40:47.000000000 +0100
+@@ -1384,6 +1384,10 @@
+ 		&rtl2832u_props, "Compro VideoMate U620F", NULL) },
+ 	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd394,
+ 		&rtl2832u_props, "MaxMedia HU394-T", NULL) },
++	{ DVB_USB_DEVICE(USB_VID_GTEK, 0xb803 /*USB_PID_AUGUST_DVBT205*/,
++		&rtl2832u_props, "August DVB-T 205", NULL) },
++	{ DVB_USB_DEVICE(USB_VID_GTEK, 0xa803 /*USB_PID_AUGUST_DVBT205*/,
++		&rtl2832u_props, "August DVB-T 205", NULL) },
+ 	{ DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6a03,
+ 		&rtl2832u_props, "Leadtek WinFast DTV Dongle mini", NULL) },
+ 	{ DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_CPYTO_REDI_PC50A,
+diff -Nur linux-3.12.6/drivers/misc/Kconfig linux-raspberry-pi/drivers/misc/Kconfig
+--- linux-3.12.6/drivers/misc/Kconfig	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/Kconfig	2013-12-29 10:40:56.000000000 +0100
+@@ -537,4 +537,5 @@
+ source "drivers/misc/altera-stapl/Kconfig"
+ source "drivers/misc/mei/Kconfig"
+ source "drivers/misc/vmw_vmci/Kconfig"
++source "drivers/misc/vc04_services/Kconfig"
+ endmenu
+diff -Nur linux-3.12.6/drivers/misc/Makefile linux-raspberry-pi/drivers/misc/Makefile
+--- linux-3.12.6/drivers/misc/Makefile	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/Makefile	2013-12-29 10:40:56.000000000 +0100
+@@ -53,3 +53,4 @@
+ obj-$(CONFIG_VMWARE_VMCI)	+= vmw_vmci/
+ obj-$(CONFIG_LATTICE_ECP3_CONFIG)	+= lattice-ecp3-config.o
+ obj-$(CONFIG_SRAM)		+= sram.o
++obj-$(CONFIG_BCM2708_VCHIQ)	+= vc04_services/
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchi/connections/connection.h linux-raspberry-pi/drivers/misc/vc04_services/interface/vchi/connections/connection.h
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchi/connections/connection.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchi/connections/connection.h	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,328 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef CONNECTION_H_
++#define CONNECTION_H_
++
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/semaphore.h>
++
++#include "interface/vchi/vchi_cfg_internal.h"
++#include "interface/vchi/vchi_common.h"
++#include "interface/vchi/message_drivers/message.h"
++
++/******************************************************************************
++ Global defs
++ *****************************************************************************/
++
++// Opaque handle for a connection / service pair
++typedef struct opaque_vchi_connection_connected_service_handle_t *VCHI_CONNECTION_SERVICE_HANDLE_T;
++
++// opaque handle to the connection state information
++typedef struct opaque_vchi_connection_info_t VCHI_CONNECTION_STATE_T;
++
++typedef struct vchi_connection_t VCHI_CONNECTION_T;
++
++
++/******************************************************************************
++ API
++ *****************************************************************************/
++
++// Routine to init a connection with a particular low level driver
++typedef VCHI_CONNECTION_STATE_T * (*VCHI_CONNECTION_INIT_T)( struct vchi_connection_t * connection,
++                                                             const VCHI_MESSAGE_DRIVER_T * driver );
++
++// Routine to control CRC enabling at a connection level
++typedef int32_t (*VCHI_CONNECTION_CRC_CONTROL_T)( VCHI_CONNECTION_STATE_T *state_handle,
++                                                  VCHI_CRC_CONTROL_T control );
++
++// Routine to create a service
++typedef int32_t (*VCHI_CONNECTION_SERVICE_CONNECT_T)( VCHI_CONNECTION_STATE_T *state_handle,
++                                                      int32_t service_id,
++                                                      uint32_t rx_fifo_size,
++                                                      uint32_t tx_fifo_size,
++                                                      int server,
++                                                      VCHI_CALLBACK_T callback,
++                                                      void *callback_param,
++                                                      int32_t want_crc,
++                                                      int32_t want_unaligned_bulk_rx,
++                                                      int32_t want_unaligned_bulk_tx,
++                                                      VCHI_CONNECTION_SERVICE_HANDLE_T *service_handle );
++
++// Routine to close a service
++typedef int32_t (*VCHI_CONNECTION_SERVICE_DISCONNECT_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle );
++
++// Routine to queue a message
++typedef int32_t (*VCHI_CONNECTION_SERVICE_QUEUE_MESSAGE_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle,
++                                                            const void *data,
++                                                            uint32_t data_size,
++                                                            VCHI_FLAGS_T flags,
++                                                            void *msg_handle );
++
++// scatter-gather (vector) message queueing
++typedef int32_t (*VCHI_CONNECTION_SERVICE_QUEUE_MESSAGEV_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle,
++                                                             VCHI_MSG_VECTOR_T *vector,
++                                                             uint32_t count,
++                                                             VCHI_FLAGS_T flags,
++                                                             void *msg_handle );
++
++// Routine to dequeue a message
++typedef int32_t (*VCHI_CONNECTION_SERVICE_DEQUEUE_MESSAGE_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle,
++                                                              void *data,
++                                                              uint32_t max_data_size_to_read,
++                                                              uint32_t *actual_msg_size,
++                                                              VCHI_FLAGS_T flags );
++
++// Routine to peek at a message
++typedef int32_t (*VCHI_CONNECTION_SERVICE_PEEK_MESSAGE_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle,
++                                                           void **data,
++                                                           uint32_t *msg_size,
++                                                           VCHI_FLAGS_T flags );
++
++// Routine to hold a message
++typedef int32_t (*VCHI_CONNECTION_SERVICE_HOLD_MESSAGE_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle,
++                                                           void **data,
++                                                           uint32_t *msg_size,
++                                                           VCHI_FLAGS_T flags,
++                                                           void **message_handle );
++
++// Routine to initialise a received message iterator
++typedef int32_t (*VCHI_CONNECTION_SERVICE_LOOKAHEAD_MESSAGE_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle,
++                                                                VCHI_MSG_ITER_T *iter,
++                                                                VCHI_FLAGS_T flags );
++
++// Routine to release a held message
++typedef int32_t (*VCHI_CONNECTION_HELD_MSG_RELEASE_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle,
++                                                       void *message_handle );
++
++// Routine to get info on a held message
++typedef int32_t (*VCHI_CONNECTION_HELD_MSG_INFO_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle,
++                                                    void *message_handle,
++                                                    void **data,
++                                                    int32_t *msg_size,
++                                                    uint32_t *tx_timestamp,
++                                                    uint32_t *rx_timestamp );
++
++// Routine to check whether the iterator has a next message
++typedef int32_t (*VCHI_CONNECTION_MSG_ITER_HAS_NEXT_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service,
++                                                       const VCHI_MSG_ITER_T *iter );
++
++// Routine to advance the iterator
++typedef int32_t (*VCHI_CONNECTION_MSG_ITER_NEXT_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service,
++                                                    VCHI_MSG_ITER_T *iter,
++                                                    void **data,
++                                                    uint32_t *msg_size );
++
++// Routine to remove the last message returned by the iterator
++typedef int32_t (*VCHI_CONNECTION_MSG_ITER_REMOVE_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service,
++                                                      VCHI_MSG_ITER_T *iter );
++
++// Routine to hold the last message returned by the iterator
++typedef int32_t (*VCHI_CONNECTION_MSG_ITER_HOLD_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service,
++                                                    VCHI_MSG_ITER_T *iter,
++                                                    void **msg_handle );
++
++// Routine to transmit bulk data
++typedef int32_t (*VCHI_CONNECTION_BULK_QUEUE_TRANSMIT_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle,
++                                                          const void *data_src,
++                                                          uint32_t data_size,
++                                                          VCHI_FLAGS_T flags,
++                                                          void *bulk_handle );
++
++// Routine to receive data
++typedef int32_t (*VCHI_CONNECTION_BULK_QUEUE_RECEIVE_T)( VCHI_CONNECTION_SERVICE_HANDLE_T service_handle,
++                                                         void *data_dst,
++                                                         uint32_t data_size,
++                                                         VCHI_FLAGS_T flags,
++                                                         void *bulk_handle );
++
++// Routine to report if a server is available
++typedef int32_t (*VCHI_CONNECTION_SERVER_PRESENT)( VCHI_CONNECTION_STATE_T *state, int32_t service_id, int32_t peer_flags );
++
++// Routine to report the number of RX slots available
++typedef int (*VCHI_CONNECTION_RX_SLOTS_AVAILABLE)( const VCHI_CONNECTION_STATE_T *state );
++
++// Routine to report the RX slot size
++typedef uint32_t (*VCHI_CONNECTION_RX_SLOT_SIZE)( const VCHI_CONNECTION_STATE_T *state );
++
++// Callback to indicate that the other side has added a buffer to the rx bulk DMA FIFO
++typedef void (*VCHI_CONNECTION_RX_BULK_BUFFER_ADDED)(VCHI_CONNECTION_STATE_T *state,
++                                                     int32_t service,
++                                                     uint32_t length,
++                                                     MESSAGE_TX_CHANNEL_T channel,
++                                                     uint32_t channel_params,
++                                                     uint32_t data_length,
++                                                     uint32_t data_offset);
++
++// Callback to inform a service that a Xon or Xoff message has been received
++typedef void (*VCHI_CONNECTION_FLOW_CONTROL)(VCHI_CONNECTION_STATE_T *state, int32_t service_id, int32_t xoff);
++
++// Callback to inform a service that a server available reply message has been received
++typedef void (*VCHI_CONNECTION_SERVER_AVAILABLE_REPLY)(VCHI_CONNECTION_STATE_T *state, int32_t service_id, uint32_t flags);
++
++// Callback to indicate that bulk auxiliary messages have arrived
++typedef void (*VCHI_CONNECTION_BULK_AUX_RECEIVED)(VCHI_CONNECTION_STATE_T *state);
++
++// Callback to indicate that bulk auxiliary messages have arrived
++typedef void (*VCHI_CONNECTION_BULK_AUX_TRANSMITTED)(VCHI_CONNECTION_STATE_T *state, void *handle);
++
++// Callback with all the connection info you require
++typedef void (*VCHI_CONNECTION_INFO)(VCHI_CONNECTION_STATE_T *state, uint32_t protocol_version, uint32_t slot_size, uint32_t num_slots, uint32_t min_bulk_size);
++
++// Callback to inform of a disconnect
++typedef void (*VCHI_CONNECTION_DISCONNECT)(VCHI_CONNECTION_STATE_T *state, uint32_t flags);
++
++// Callback to inform of a power control request
++typedef void (*VCHI_CONNECTION_POWER_CONTROL)(VCHI_CONNECTION_STATE_T *state, MESSAGE_TX_CHANNEL_T channel, int32_t enable);
++
++// allocate memory suitably aligned for this connection
++typedef void * (*VCHI_BUFFER_ALLOCATE)(VCHI_CONNECTION_SERVICE_HANDLE_T service_handle, uint32_t * length);
++
++// free memory allocated by buffer_allocate
++typedef void   (*VCHI_BUFFER_FREE)(VCHI_CONNECTION_SERVICE_HANDLE_T service_handle, void * address);
++
++
++/******************************************************************************
++ System driver struct
++ *****************************************************************************/
++
++struct opaque_vchi_connection_api_t
++{
++   // Routine to init the connection
++   VCHI_CONNECTION_INIT_T                      init;
++
++   // Connection-level CRC control
++   VCHI_CONNECTION_CRC_CONTROL_T               crc_control;
++
++   // Routine to connect to or create service
++   VCHI_CONNECTION_SERVICE_CONNECT_T           service_connect;
++
++   // Routine to disconnect from a service
++   VCHI_CONNECTION_SERVICE_DISCONNECT_T        service_disconnect;
++
++   // Routine to queue a message
++   VCHI_CONNECTION_SERVICE_QUEUE_MESSAGE_T     service_queue_msg;
++
++   // scatter-gather (vector) message queue
++   VCHI_CONNECTION_SERVICE_QUEUE_MESSAGEV_T    service_queue_msgv;
++
++   // Routine to dequeue a message
++   VCHI_CONNECTION_SERVICE_DEQUEUE_MESSAGE_T   service_dequeue_msg;
++
++   // Routine to peek at a message
++   VCHI_CONNECTION_SERVICE_PEEK_MESSAGE_T      service_peek_msg;
++
++   // Routine to hold a message
++   VCHI_CONNECTION_SERVICE_HOLD_MESSAGE_T      service_hold_msg;
++
++   // Routine to initialise a received message iterator
++   VCHI_CONNECTION_SERVICE_LOOKAHEAD_MESSAGE_T service_look_ahead_msg;
++
++   // Routine to release a message
++   VCHI_CONNECTION_HELD_MSG_RELEASE_T          held_msg_release;
++
++   // Routine to get information on a held message
++   VCHI_CONNECTION_HELD_MSG_INFO_T             held_msg_info;
++
++   // Routine to check for next message on iterator
++   VCHI_CONNECTION_MSG_ITER_HAS_NEXT_T         msg_iter_has_next;
++
++   // Routine to get next message on iterator
++   VCHI_CONNECTION_MSG_ITER_NEXT_T             msg_iter_next;
++
++   // Routine to remove the last message returned by iterator
++   VCHI_CONNECTION_MSG_ITER_REMOVE_T           msg_iter_remove;
++
++   // Routine to hold the last message returned by iterator
++   VCHI_CONNECTION_MSG_ITER_HOLD_T             msg_iter_hold;
++
++   // Routine to transmit bulk data
++   VCHI_CONNECTION_BULK_QUEUE_TRANSMIT_T       bulk_queue_transmit;
++
++   // Routine to receive data
++   VCHI_CONNECTION_BULK_QUEUE_RECEIVE_T        bulk_queue_receive;
++
++   // Routine to report the available servers
++   VCHI_CONNECTION_SERVER_PRESENT              server_present;
++
++   // Routine to report the number of RX slots available
++   VCHI_CONNECTION_RX_SLOTS_AVAILABLE          connection_rx_slots_available;
++
++   // Routine to report the RX slot size
++   VCHI_CONNECTION_RX_SLOT_SIZE                connection_rx_slot_size;
++
++   // Callback to indicate that the other side has added a buffer to the rx bulk DMA FIFO
++   VCHI_CONNECTION_RX_BULK_BUFFER_ADDED        rx_bulk_buffer_added;
++
++   // Callback to inform a service that a Xon or Xoff message has been received
++   VCHI_CONNECTION_FLOW_CONTROL                flow_control;
++
++   // Callback to inform a service that a server available reply message has been received
++   VCHI_CONNECTION_SERVER_AVAILABLE_REPLY      server_available_reply;
++
++   // Callback to indicate that bulk auxiliary messages have arrived
++   VCHI_CONNECTION_BULK_AUX_RECEIVED           bulk_aux_received;
++
++   // Callback to indicate that a bulk auxiliary message has been transmitted
++   VCHI_CONNECTION_BULK_AUX_TRANSMITTED        bulk_aux_transmitted;
++
++   // Callback to provide information about the connection
++   VCHI_CONNECTION_INFO                        connection_info;
++
++   // Callback to notify that peer has requested disconnect
++   VCHI_CONNECTION_DISCONNECT                  disconnect;
++
++   // Callback to notify that peer has requested power change
++   VCHI_CONNECTION_POWER_CONTROL               power_control;
++
++   // allocate memory suitably aligned for this connection
++   VCHI_BUFFER_ALLOCATE                        buffer_allocate;
++
++   // free memory allocated by buffer_allocate
++   VCHI_BUFFER_FREE                            buffer_free;
++
++};
++
++struct vchi_connection_t {
++   const VCHI_CONNECTION_API_T *api;
++   VCHI_CONNECTION_STATE_T     *state;
++#ifdef VCHI_COARSE_LOCKING
++   struct semaphore             sem;
++#endif
++};
++
++
++#endif /* CONNECTION_H_ */
++
++/****************************** End of file **********************************/
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchi/message_drivers/message.h linux-raspberry-pi/drivers/misc/vc04_services/interface/vchi/message_drivers/message.h
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchi/message_drivers/message.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchi/message_drivers/message.h	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,204 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef _VCHI_MESSAGE_H_
++#define _VCHI_MESSAGE_H_
++
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/semaphore.h>
++
++#include "interface/vchi/vchi_cfg_internal.h"
++#include "interface/vchi/vchi_common.h"
++
++
++typedef enum message_event_type {
++   MESSAGE_EVENT_NONE,
++   MESSAGE_EVENT_NOP,
++   MESSAGE_EVENT_MESSAGE,
++   MESSAGE_EVENT_SLOT_COMPLETE,
++   MESSAGE_EVENT_RX_BULK_PAUSED,
++   MESSAGE_EVENT_RX_BULK_COMPLETE,
++   MESSAGE_EVENT_TX_COMPLETE,
++   MESSAGE_EVENT_MSG_DISCARDED
++} MESSAGE_EVENT_TYPE_T;
++
++typedef enum vchi_msg_flags
++{
++   VCHI_MSG_FLAGS_NONE                  = 0x0,
++   VCHI_MSG_FLAGS_TERMINATE_DMA         = 0x1
++} VCHI_MSG_FLAGS_T;
++
++typedef enum message_tx_channel
++{
++   MESSAGE_TX_CHANNEL_MESSAGE           = 0,
++   MESSAGE_TX_CHANNEL_BULK              = 1 // drivers may provide multiple bulk channels, from 1 upwards
++} MESSAGE_TX_CHANNEL_T;
++
++// Macros used for cycling through bulk channels
++#define MESSAGE_TX_CHANNEL_BULK_PREV(c) (MESSAGE_TX_CHANNEL_BULK+((c)-MESSAGE_TX_CHANNEL_BULK+VCHI_MAX_BULK_TX_CHANNELS_PER_CONNECTION-1)%VCHI_MAX_BULK_TX_CHANNELS_PER_CONNECTION)
++#define MESSAGE_TX_CHANNEL_BULK_NEXT(c) (MESSAGE_TX_CHANNEL_BULK+((c)-MESSAGE_TX_CHANNEL_BULK+1)%VCHI_MAX_BULK_TX_CHANNELS_PER_CONNECTION)
++
++typedef enum message_rx_channel
++{
++   MESSAGE_RX_CHANNEL_MESSAGE           = 0,
++   MESSAGE_RX_CHANNEL_BULK              = 1 // drivers may provide multiple bulk channels, from 1 upwards
++} MESSAGE_RX_CHANNEL_T;
++
++// Message receive slot information
++typedef struct rx_msg_slot_info {
++
++   struct rx_msg_slot_info *next;
++   //struct slot_info *prev;
++#if !defined VCHI_COARSE_LOCKING
++   struct semaphore   sem;
++#endif
++
++   uint8_t           *addr;               // base address of slot
++   uint32_t           len;                // length of slot in bytes
++
++   uint32_t           write_ptr;          // hardware causes this to advance
++   uint32_t           read_ptr;           // this module does the reading
++   int                active;             // is this slot in the hardware dma fifo?
++   uint32_t           msgs_parsed;        // count how many messages are in this slot
++   uint32_t           msgs_released;      // how many messages have been released
++   void              *state;              // connection state information
++   uint8_t            ref_count[VCHI_MAX_SERVICES_PER_CONNECTION];          // reference count for slots held by services
++} RX_MSG_SLOTINFO_T;
++
++// The message driver no longer needs to know about the fields of RX_BULK_SLOTINFO_T - sort this out.
++// In particular, it mustn't use addr and len - they're the client buffer, but the message
++// driver will be tasked with sending the aligned core section.
++typedef struct rx_bulk_slotinfo_t {
++   struct rx_bulk_slotinfo_t *next;
++
++   struct semaphore *blocking;
++
++   // needed by DMA
++   void        *addr;
++   uint32_t     len;
++
++   // needed for the callback
++   void        *service;
++   void        *handle;
++   VCHI_FLAGS_T flags;
++} RX_BULK_SLOTINFO_T;
++
++
++/* ----------------------------------------------------------------------
++ * each connection driver will have a pool of the following struct.
++ *
++ * the pool will be managed by vchi_qman_*
++ * this means there will be multiple queues (single linked lists)
++ * a given struct message_info will be on exactly one of these queues
++ * at any one time
++ * -------------------------------------------------------------------- */
++typedef struct rx_message_info {
++
++   struct message_info *next;
++   //struct message_info *prev;
++
++   uint8_t    *addr;
++   uint32_t   len;
++   RX_MSG_SLOTINFO_T *slot; // points to whichever slot contains this message
++   uint32_t   tx_timestamp;
++   uint32_t   rx_timestamp;
++
++} RX_MESSAGE_INFO_T;
++
++typedef struct {
++   MESSAGE_EVENT_TYPE_T type;
++
++   struct {
++      // for messages
++      void    *addr;           // address of message
++      uint16_t slot_delta;     // whether this message indicated slot delta
++      uint32_t len;            // length of message
++      RX_MSG_SLOTINFO_T *slot; // slot this message is in
++      int32_t  service;   // service id this message is destined for
++      uint32_t tx_timestamp;   // timestamp from the header
++      uint32_t rx_timestamp;   // timestamp when we parsed it
++   } message;
++
++   // FIXME: cleanup slot reporting...
++   RX_MSG_SLOTINFO_T *rx_msg;
++   RX_BULK_SLOTINFO_T *rx_bulk;
++   void *tx_handle;
++   MESSAGE_TX_CHANNEL_T tx_channel;
++
++} MESSAGE_EVENT_T;
++
++
++// callbacks
++typedef void VCHI_MESSAGE_DRIVER_EVENT_CALLBACK_T( void *state );
++
++typedef struct {
++   VCHI_MESSAGE_DRIVER_EVENT_CALLBACK_T *event_callback;
++} VCHI_MESSAGE_DRIVER_OPEN_T;
++
++
++// handle to this instance of message driver (as returned by ->open)
++typedef struct opaque_mhandle_t *VCHI_MDRIVER_HANDLE_T;
++
++struct opaque_vchi_message_driver_t {
++   VCHI_MDRIVER_HANDLE_T *(*open)( VCHI_MESSAGE_DRIVER_OPEN_T *params, void *state );
++   int32_t (*suspending)( VCHI_MDRIVER_HANDLE_T *handle );
++   int32_t (*resumed)( VCHI_MDRIVER_HANDLE_T *handle );
++   int32_t (*power_control)( VCHI_MDRIVER_HANDLE_T *handle, MESSAGE_TX_CHANNEL_T, int32_t enable );
++   int32_t (*add_msg_rx_slot)( VCHI_MDRIVER_HANDLE_T *handle, RX_MSG_SLOTINFO_T *slot );      // rx message
++   int32_t (*add_bulk_rx)( VCHI_MDRIVER_HANDLE_T *handle, void *data, uint32_t len, RX_BULK_SLOTINFO_T *slot );  // rx data (bulk)
++   int32_t (*send)( VCHI_MDRIVER_HANDLE_T *handle, MESSAGE_TX_CHANNEL_T channel, const void *data, uint32_t len, VCHI_MSG_FLAGS_T flags, void *send_handle );      // tx (message & bulk)
++   void    (*next_event)( VCHI_MDRIVER_HANDLE_T *handle, MESSAGE_EVENT_T *event );     // get the next event from message_driver
++   int32_t (*enable)( VCHI_MDRIVER_HANDLE_T *handle );
++   int32_t (*form_message)( VCHI_MDRIVER_HANDLE_T *handle, int32_t service_id, VCHI_MSG_VECTOR_T *vector, uint32_t count, void
++                            *address, uint32_t length_avail, uint32_t max_total_length, int32_t pad_to_fill, int32_t allow_partial );
++
++   int32_t (*update_message)( VCHI_MDRIVER_HANDLE_T *handle, void *dest, int16_t *slot_count );
++   int32_t (*buffer_aligned)( VCHI_MDRIVER_HANDLE_T *handle, int tx, int uncached, const void *address, const uint32_t length );
++   void *  (*allocate_buffer)( VCHI_MDRIVER_HANDLE_T *handle, uint32_t *length );
++   void    (*free_buffer)( VCHI_MDRIVER_HANDLE_T *handle, void *address );
++   int     (*rx_slot_size)( VCHI_MDRIVER_HANDLE_T *handle, int msg_size );
++   int     (*tx_slot_size)( VCHI_MDRIVER_HANDLE_T *handle, int msg_size );
++
++   int32_t  (*tx_supports_terminate)( const VCHI_MDRIVER_HANDLE_T *handle, MESSAGE_TX_CHANNEL_T channel );
++   uint32_t (*tx_bulk_chunk_size)( const VCHI_MDRIVER_HANDLE_T *handle, MESSAGE_TX_CHANNEL_T channel );
++   int     (*tx_alignment)( const VCHI_MDRIVER_HANDLE_T *handle, MESSAGE_TX_CHANNEL_T channel );
++   int     (*rx_alignment)( const VCHI_MDRIVER_HANDLE_T *handle, MESSAGE_RX_CHANNEL_T channel );
++   void    (*form_bulk_aux)( VCHI_MDRIVER_HANDLE_T *handle, MESSAGE_TX_CHANNEL_T channel, const void *data, uint32_t len, uint32_t chunk_size, const void **aux_data, int32_t *aux_len );
++   void    (*debug)( VCHI_MDRIVER_HANDLE_T *handle );
++};
++
++
++#endif // _VCHI_MESSAGE_H_
++
++/****************************** End of file ***********************************/
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchi/vchi_cfg.h linux-raspberry-pi/drivers/misc/vc04_services/interface/vchi/vchi_cfg.h
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchi/vchi_cfg.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchi/vchi_cfg.h	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,224 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHI_CFG_H_
++#define VCHI_CFG_H_
++
++/****************************************************************************************
++ * Defines in this first section are part of the VCHI API and may be examined by VCHI
++ * services.
++ ***************************************************************************************/
++
++/* Required alignment of base addresses for bulk transfer, if unaligned transfers are not enabled */
++/* Really determined by the message driver, and should be available from a run-time call. */
++#ifndef VCHI_BULK_ALIGN
++#   if __VCCOREVER__ >= 0x04000000
++#       define VCHI_BULK_ALIGN 32 // Allows for the need to do cache cleans
++#   else
++#       define VCHI_BULK_ALIGN 16
++#   endif
++#endif
++
++/* Required length multiple for bulk transfers, if unaligned transfers are not enabled */
++/* May be less than or greater than VCHI_BULK_ALIGN */
++/* Really determined by the message driver, and should be available from a run-time call. */
++#ifndef VCHI_BULK_GRANULARITY
++#   if __VCCOREVER__ >= 0x04000000
++#       define VCHI_BULK_GRANULARITY 32 // Allows for the need to do cache cleans
++#   else
++#       define VCHI_BULK_GRANULARITY 16
++#   endif
++#endif
++
++/* The largest possible message to be queued with vchi_msg_queue. */
++#ifndef VCHI_MAX_MSG_SIZE
++#   if defined VCHI_LOCAL_HOST_PORT
++#       define VCHI_MAX_MSG_SIZE     16384         // makes file transfers fast, but should they be using bulk?
++#   else
++#       define VCHI_MAX_MSG_SIZE      4096 // NOTE: THIS MUST BE LARGER THAN OR EQUAL TO THE SIZE OF THE KHRONOS MERGE BUFFER!!
++#   endif
++#endif
++
++/******************************************************************************************
++ * Defines below are system configuration options, and should not be used by VCHI services.
++ *****************************************************************************************/
++
++/* How many connections can we support? A localhost implementation uses 2 connections,
++ * 1 for host-app, 1 for VMCS, and these are hooked together by a loopback MPHI VCFW
++ * driver. */
++#ifndef VCHI_MAX_NUM_CONNECTIONS
++#   define VCHI_MAX_NUM_CONNECTIONS 3
++#endif
++
++/* How many services can we open per connection? Extending this doesn't cost processing time, just a small
++ * amount of static memory. */
++#ifndef VCHI_MAX_SERVICES_PER_CONNECTION
++#  define VCHI_MAX_SERVICES_PER_CONNECTION 36
++#endif
++
++/* Adjust if using a message driver that supports more logical TX channels */
++#ifndef VCHI_MAX_BULK_TX_CHANNELS_PER_CONNECTION
++#   define VCHI_MAX_BULK_TX_CHANNELS_PER_CONNECTION 9 // 1 MPHI + 8 CCP2 logical channels
++#endif
++
++/* Adjust if using a message driver that supports more logical RX channels */
++#ifndef VCHI_MAX_BULK_RX_CHANNELS_PER_CONNECTION
++#   define VCHI_MAX_BULK_RX_CHANNELS_PER_CONNECTION 1 // 1 MPHI
++#endif
++
++/* How many receive slots do we use. This times VCHI_MAX_MSG_SIZE gives the effective
++ * receive queue space, less message headers. */
++#ifndef VCHI_NUM_READ_SLOTS
++#  if defined(VCHI_LOCAL_HOST_PORT)
++#     define VCHI_NUM_READ_SLOTS 4
++#  else
++#     define VCHI_NUM_READ_SLOTS 48
++#  endif
++#endif
++
++/* Do we utilise overrun facility for receive message slots? Can aid peer transmit
++ * performance. Only define on VideoCore end, talking to host.
++ */
++//#define VCHI_MSG_RX_OVERRUN
++
++/* How many transmit slots do we use. Generally don't need many, as the hardware driver
++ * underneath VCHI will usually have its own buffering. */
++#ifndef VCHI_NUM_WRITE_SLOTS
++#  define VCHI_NUM_WRITE_SLOTS 4
++#endif
++
++/* If a service has held or queued received messages in VCHI_XOFF_THRESHOLD or more slots,
++ * then it's taking up too much buffer space, and the peer service will be told to stop
++ * transmitting with an XOFF message. For this to be effective, the VCHI_NUM_READ_SLOTS
++ * needs to be considerably bigger than VCHI_NUM_WRITE_SLOTS, or the transmit latency
++ * is too high. */
++#ifndef VCHI_XOFF_THRESHOLD
++#  define VCHI_XOFF_THRESHOLD (VCHI_NUM_READ_SLOTS / 2)
++#endif
++
++/* After we've sent an XOFF, the peer will be told to resume transmission once the local
++ * service has dequeued/released enough messages that it's now occupying
++ * VCHI_XON_THRESHOLD slots or fewer. */
++#ifndef VCHI_XON_THRESHOLD
++#  define VCHI_XON_THRESHOLD (VCHI_NUM_READ_SLOTS / 4)
++#endif
++
++/* A size below which a bulk transfer omits the handshake completely and always goes
++ * via the message channel, if bulk auxiliary is being sent on that service. (The user
++ * can guarantee this by enabling unaligned transmits).
++ * Not API. */
++#ifndef VCHI_MIN_BULK_SIZE
++#  define VCHI_MIN_BULK_SIZE    ( VCHI_MAX_MSG_SIZE / 2 < 4096 ? VCHI_MAX_MSG_SIZE / 2 : 4096 )
++#endif
++
++/* Maximum size of bulk transmission chunks, for each interface type. A trade-off between
++ * speed and latency; the smaller the chunk size the better change of messages and other
++ * bulk transmissions getting in when big bulk transfers are happening. Set to 0 to not
++ * break transmissions into chunks.
++ */
++#ifndef VCHI_MAX_BULK_CHUNK_SIZE_MPHI
++#  define VCHI_MAX_BULK_CHUNK_SIZE_MPHI (16 * 1024)
++#endif
++
++/* NB Chunked CCP2 transmissions violate the letter of the CCP2 spec by using "JPEG8" mode
++ * with multiple-line frames. Only use if the receiver can cope. */
++#ifndef VCHI_MAX_BULK_CHUNK_SIZE_CCP2
++#  define VCHI_MAX_BULK_CHUNK_SIZE_CCP2 0
++#endif
++
++/* How many TX messages can we have pending in our transmit slots. Once exhausted,
++ * vchi_msg_queue will be blocked. */
++#ifndef VCHI_TX_MSG_QUEUE_SIZE
++#  define VCHI_TX_MSG_QUEUE_SIZE           256
++#endif
++
++/* How many RX messages can we have parsed in the receive slots. Once exhausted, parsing
++ * will be suspended until older messages are dequeued/released. */
++#ifndef VCHI_RX_MSG_QUEUE_SIZE
++#  define VCHI_RX_MSG_QUEUE_SIZE           256
++#endif
++
++/* Really should be able to cope if we run out of received message descriptors, by
++ * suspending parsing as the comment above says, but we don't. This sweeps the issue
++ * under the carpet. */
++#if VCHI_RX_MSG_QUEUE_SIZE < (VCHI_MAX_MSG_SIZE/16 + 1) * VCHI_NUM_READ_SLOTS
++#  undef VCHI_RX_MSG_QUEUE_SIZE
++#  define VCHI_RX_MSG_QUEUE_SIZE (VCHI_MAX_MSG_SIZE/16 + 1) * VCHI_NUM_READ_SLOTS
++#endif
++
++/* How many bulk transmits can we have pending. Once exhausted, vchi_bulk_queue_transmit
++ * will be blocked. */
++#ifndef VCHI_TX_BULK_QUEUE_SIZE
++#  define VCHI_TX_BULK_QUEUE_SIZE           64
++#endif
++
++/* How many bulk receives can we have pending. Once exhausted, vchi_bulk_queue_receive
++ * will be blocked. */
++#ifndef VCHI_RX_BULK_QUEUE_SIZE
++#  define VCHI_RX_BULK_QUEUE_SIZE           64
++#endif
++
++/* A limit on how many outstanding bulk requests we expect the peer to give us. If
++ * the peer asks for more than this, VCHI will fail and assert. The number is determined
++ * by the peer's hardware - it's the number of outstanding requests that can be queued
++ * on all bulk channels. VC3's MPHI peripheral allows 16. */
++#ifndef VCHI_MAX_PEER_BULK_REQUESTS
++#  define VCHI_MAX_PEER_BULK_REQUESTS       32
++#endif
++
++/* Define VCHI_CCP2TX_MANUAL_POWER if the host tells us when to turn the CCP2
++ * transmitter on and off.
++ */
++/*#define VCHI_CCP2TX_MANUAL_POWER*/
++
++#ifndef VCHI_CCP2TX_MANUAL_POWER
++
++/* Timeout (in milliseconds) for putting the CCP2TX interface into IDLE state. Set
++ * negative for no IDLE.
++ */
++#  ifndef VCHI_CCP2TX_IDLE_TIMEOUT
++#    define VCHI_CCP2TX_IDLE_TIMEOUT        5
++#  endif
++
++/* Timeout (in milliseconds) for putting the CCP2TX interface into OFF state. Set
++ * negative for no OFF.
++ */
++#  ifndef VCHI_CCP2TX_OFF_TIMEOUT
++#    define VCHI_CCP2TX_OFF_TIMEOUT         1000
++#  endif
++
++#endif /* VCHI_CCP2TX_MANUAL_POWER */
++
++#endif /* VCHI_CFG_H_ */
++
++/****************************** End of file **********************************/
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchi/vchi_cfg_internal.h linux-raspberry-pi/drivers/misc/vc04_services/interface/vchi/vchi_cfg_internal.h
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchi/vchi_cfg_internal.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchi/vchi_cfg_internal.h	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,71 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHI_CFG_INTERNAL_H_
++#define VCHI_CFG_INTERNAL_H_
++
++/****************************************************************************************
++ * Control optimisation attempts.
++ ***************************************************************************************/
++
++// Don't use lots of short-term locks - use great long ones, reducing the overall locks-per-second
++#define VCHI_COARSE_LOCKING
++
++// Avoid lock then unlock on exit from blocking queue operations (msg tx, bulk rx/tx)
++// (only relevant if VCHI_COARSE_LOCKING)
++#define VCHI_ELIDE_BLOCK_EXIT_LOCK
++
++// Avoid lock on non-blocking peek
++// (only relevant if VCHI_COARSE_LOCKING)
++#define VCHI_AVOID_PEEK_LOCK
++
++// Use one slot-handler thread per connection, rather than 1 thread dealing with all connections in rotation.
++#define VCHI_MULTIPLE_HANDLER_THREADS
++
++// Put free descriptors onto the head of the free queue, rather than the tail, so that we don't thrash
++// our way through the pool of descriptors.
++#define VCHI_PUSH_FREE_DESCRIPTORS_ONTO_HEAD
++
++// Don't issue a MSG_AVAILABLE callback for every single message. Possibly only safe if VCHI_COARSE_LOCKING.
++#define VCHI_FEWER_MSG_AVAILABLE_CALLBACKS
++
++// Don't use message descriptors for TX messages that don't need them
++#define VCHI_MINIMISE_TX_MSG_DESCRIPTORS
++
++// Nano-locks for multiqueue
++//#define VCHI_MQUEUE_NANOLOCKS
++
++// Lock-free(er) dequeuing
++//#define VCHI_RX_NANOLOCKS
++
++#endif /*VCHI_CFG_INTERNAL_H_*/
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchi/vchi_common.h linux-raspberry-pi/drivers/misc/vc04_services/interface/vchi/vchi_common.h
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchi/vchi_common.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchi/vchi_common.h	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,163 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHI_COMMON_H_
++#define VCHI_COMMON_H_
++
++
++//flags used when sending messages (must be bitmapped)
++typedef enum
++{
++   VCHI_FLAGS_NONE                      = 0x0,
++   VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE   = 0x1,   // waits for message to be received, or sent (NB. not the same as being seen on other side)
++   VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE = 0x2,   // run a callback when message sent
++   VCHI_FLAGS_BLOCK_UNTIL_QUEUED        = 0x4,   // return once the transfer is in a queue ready to go
++   VCHI_FLAGS_ALLOW_PARTIAL             = 0x8,
++   VCHI_FLAGS_BLOCK_UNTIL_DATA_READ     = 0x10,
++   VCHI_FLAGS_CALLBACK_WHEN_DATA_READ   = 0x20,
++
++   VCHI_FLAGS_ALIGN_SLOT            = 0x000080,  // internal use only
++   VCHI_FLAGS_BULK_AUX_QUEUED       = 0x010000,  // internal use only
++   VCHI_FLAGS_BULK_AUX_COMPLETE     = 0x020000,  // internal use only
++   VCHI_FLAGS_BULK_DATA_QUEUED      = 0x040000,  // internal use only
++   VCHI_FLAGS_BULK_DATA_COMPLETE    = 0x080000,  // internal use only
++   VCHI_FLAGS_INTERNAL              = 0xFF0000
++} VCHI_FLAGS_T;
++
++// constants for vchi_crc_control()
++typedef enum {
++   VCHI_CRC_NOTHING = -1,
++   VCHI_CRC_PER_SERVICE = 0,
++   VCHI_CRC_EVERYTHING = 1,
++} VCHI_CRC_CONTROL_T;
++
++//callback reasons when an event occurs on a service
++typedef enum
++{
++   VCHI_CALLBACK_REASON_MIN,
++
++   //This indicates that there is data available
++   //handle is the msg id that was transmitted with the data
++   //    When a message is received and there was no FULL message available previously, send callback
++   //    Tasks get kicked by the callback, reset their event and try and read from the fifo until it fails
++   VCHI_CALLBACK_MSG_AVAILABLE,
++   VCHI_CALLBACK_MSG_SENT,
++   VCHI_CALLBACK_MSG_SPACE_AVAILABLE, // XXX not yet implemented
++
++   // This indicates that a transfer from the other side has completed
++   VCHI_CALLBACK_BULK_RECEIVED,
++   //This indicates that data queued up to be sent has now gone
++   //handle is the msg id that was used when sending the data
++   VCHI_CALLBACK_BULK_SENT,
++   VCHI_CALLBACK_BULK_RX_SPACE_AVAILABLE, // XXX not yet implemented
++   VCHI_CALLBACK_BULK_TX_SPACE_AVAILABLE, // XXX not yet implemented
++
++   VCHI_CALLBACK_SERVICE_CLOSED,
++
++   // this side has sent XOFF to peer due to lack of data consumption by service
++   // (suggests the service may need to take some recovery action if it has
++   // been deliberately holding off consuming data)
++   VCHI_CALLBACK_SENT_XOFF,
++   VCHI_CALLBACK_SENT_XON,
++
++   // indicates that a bulk transfer has finished reading the source buffer
++   VCHI_CALLBACK_BULK_DATA_READ,
++
++   // power notification events (currently host side only)
++   VCHI_CALLBACK_PEER_OFF,
++   VCHI_CALLBACK_PEER_SUSPENDED,
++   VCHI_CALLBACK_PEER_ON,
++   VCHI_CALLBACK_PEER_RESUMED,
++   VCHI_CALLBACK_FORCED_POWER_OFF,
++
++#ifdef USE_VCHIQ_ARM
++   // some extra notifications provided by vchiq_arm
++   VCHI_CALLBACK_SERVICE_OPENED,
++   VCHI_CALLBACK_BULK_RECEIVE_ABORTED,
++   VCHI_CALLBACK_BULK_TRANSMIT_ABORTED,
++#endif
++
++   VCHI_CALLBACK_REASON_MAX
++} VCHI_CALLBACK_REASON_T;
++
++//Calback used by all services / bulk transfers
++typedef void (*VCHI_CALLBACK_T)( void *callback_param, //my service local param
++                                 VCHI_CALLBACK_REASON_T reason,
++                                 void *handle ); //for transmitting msg's only
++
++
++
++/*
++ * Define vector struct for scatter-gather (vector) operations
++ * Vectors can be nested - if a vector element has negative length, then
++ * the data pointer is treated as pointing to another vector array, with
++ * '-vec_len' elements. Thus to append a header onto an existing vector,
++ * you can do this:
++ *
++ * void foo(const VCHI_MSG_VECTOR_T *v, int n)
++ * {
++ *    VCHI_MSG_VECTOR_T nv[2];
++ *    nv[0].vec_base = my_header;
++ *    nv[0].vec_len = sizeof my_header;
++ *    nv[1].vec_base = v;
++ *    nv[1].vec_len = -n;
++ *    ...
++ *
++ */
++typedef struct vchi_msg_vector {
++   const void *vec_base;
++   int32_t vec_len;
++} VCHI_MSG_VECTOR_T;
++
++// Opaque type for a connection API
++typedef struct opaque_vchi_connection_api_t VCHI_CONNECTION_API_T;
++
++// Opaque type for a message driver
++typedef struct opaque_vchi_message_driver_t VCHI_MESSAGE_DRIVER_T;
++
++
++// Iterator structure for reading ahead through received message queue. Allocated by client,
++// initialised by vchi_msg_look_ahead. Fields are for internal VCHI use only.
++// Iterates over messages in queue at the instant of the call to vchi_msg_lookahead -
++// will not proceed to messages received since. Behaviour is undefined if an iterator
++// is used again after messages for that service are removed/dequeued by any
++// means other than vchi_msg_iter_... calls on the iterator itself.
++typedef struct {
++   struct opaque_vchi_service_t *service;
++   void *last;
++   void *next;
++   void *remove;
++} VCHI_MSG_ITER_T;
++
++
++#endif // VCHI_COMMON_H_
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchi/vchi.h linux-raspberry-pi/drivers/misc/vc04_services/interface/vchi/vchi.h
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchi/vchi.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchi/vchi.h	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,373 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHI_H_
++#define VCHI_H_
++
++#include "interface/vchi/vchi_cfg.h"
++#include "interface/vchi/vchi_common.h"
++#include "interface/vchi/connections/connection.h"
++#include "vchi_mh.h"
++
++
++/******************************************************************************
++ Global defs
++ *****************************************************************************/
++
++#define VCHI_BULK_ROUND_UP(x)     ((((unsigned long)(x))+VCHI_BULK_ALIGN-1) & ~(VCHI_BULK_ALIGN-1))
++#define VCHI_BULK_ROUND_DOWN(x)   (((unsigned long)(x)) & ~(VCHI_BULK_ALIGN-1))
++#define VCHI_BULK_ALIGN_NBYTES(x) (VCHI_BULK_ALIGNED(x) ? 0 : (VCHI_BULK_ALIGN - ((unsigned long)(x) & (VCHI_BULK_ALIGN-1))))
++
++#ifdef USE_VCHIQ_ARM
++#define VCHI_BULK_ALIGNED(x)      1
++#else
++#define VCHI_BULK_ALIGNED(x)      (((unsigned long)(x) & (VCHI_BULK_ALIGN-1)) == 0)
++#endif
++
++struct vchi_version {
++	uint32_t version;
++	uint32_t version_min;
++};
++#define VCHI_VERSION(v_) { v_, v_ }
++#define VCHI_VERSION_EX(v_, m_) { v_, m_ }
++
++typedef enum
++{
++   VCHI_VEC_POINTER,
++   VCHI_VEC_HANDLE,
++   VCHI_VEC_LIST
++} VCHI_MSG_VECTOR_TYPE_T;
++
++typedef struct vchi_msg_vector_ex {
++
++   VCHI_MSG_VECTOR_TYPE_T type;
++   union
++   {
++      // a memory handle
++      struct
++      {
++         VCHI_MEM_HANDLE_T handle;
++         uint32_t offset;
++         int32_t vec_len;
++      } handle;
++
++      // an ordinary data pointer
++      struct
++      {
++         const void *vec_base;
++         int32_t vec_len;
++      } ptr;
++
++      // a nested vector list
++      struct
++      {
++         struct vchi_msg_vector_ex *vec;
++         uint32_t vec_len;
++      } list;
++   } u;
++} VCHI_MSG_VECTOR_EX_T;
++
++
++// Construct an entry in a msg vector for a pointer (p) of length (l)
++#define VCHI_VEC_POINTER(p,l)  VCHI_VEC_POINTER, { { (VCHI_MEM_HANDLE_T)(p), (l) } }
++
++// Construct an entry in a msg vector for a message handle (h), starting at offset (o) of length (l)
++#define VCHI_VEC_HANDLE(h,o,l) VCHI_VEC_HANDLE,  { { (h), (o), (l) } }
++
++// Macros to manipulate 'FOURCC' values
++#define MAKE_FOURCC(x) ((int32_t)( (x[0] << 24) | (x[1] << 16) | (x[2] << 8) | x[3] ))
++#define FOURCC_TO_CHAR(x) (x >> 24) & 0xFF,(x >> 16) & 0xFF,(x >> 8) & 0xFF, x & 0xFF
++
++
++// Opaque service information
++struct opaque_vchi_service_t;
++
++// Descriptor for a held message. Allocated by client, initialised by vchi_msg_hold,
++// vchi_msg_iter_hold or vchi_msg_iter_hold_next. Fields are for internal VCHI use only.
++typedef struct
++{
++   struct opaque_vchi_service_t *service;
++   void *message;
++} VCHI_HELD_MSG_T;
++
++
++
++// structure used to provide the information needed to open a server or a client
++typedef struct {
++	struct vchi_version version;
++	int32_t service_id;
++	VCHI_CONNECTION_T *connection;
++	uint32_t rx_fifo_size;
++	uint32_t tx_fifo_size;
++	VCHI_CALLBACK_T callback;
++	void *callback_param;
++	/* client intends to receive bulk transfers of
++		odd lengths or into unaligned buffers */
++	int32_t want_unaligned_bulk_rx;
++	/* client intends to transmit bulk transfers of
++		odd lengths or out of unaligned buffers */
++	int32_t want_unaligned_bulk_tx;
++	/* client wants to check CRCs on (bulk) xfers.
++		Only needs to be set at 1 end - will do both directions. */
++	int32_t want_crc;
++} SERVICE_CREATION_T;
++
++// Opaque handle for a VCHI instance
++typedef struct opaque_vchi_instance_handle_t *VCHI_INSTANCE_T;
++
++// Opaque handle for a server or client
++typedef struct opaque_vchi_service_handle_t *VCHI_SERVICE_HANDLE_T;
++
++// Service registration & startup
++typedef void (*VCHI_SERVICE_INIT)(VCHI_INSTANCE_T initialise_instance, VCHI_CONNECTION_T **connections, uint32_t num_connections);
++
++typedef struct service_info_tag {
++   const char * const vll_filename; /* VLL to load to start this service. This is an empty string if VLL is "static" */
++   VCHI_SERVICE_INIT init;          /* Service initialisation function */
++   void *vll_handle;                /* VLL handle; NULL when unloaded or a "static VLL" in build */
++} SERVICE_INFO_T;
++
++/******************************************************************************
++ Global funcs - implementation is specific to which side you are on (local / remote)
++ *****************************************************************************/
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++extern /*@observer@*/ VCHI_CONNECTION_T * vchi_create_connection( const VCHI_CONNECTION_API_T * function_table,
++                                                   const VCHI_MESSAGE_DRIVER_T * low_level);
++
++
++// Routine used to initialise the vchi on both local + remote connections
++extern int32_t vchi_initialise( VCHI_INSTANCE_T *instance_handle );
++
++extern int32_t vchi_exit( void );
++
++extern int32_t vchi_connect( VCHI_CONNECTION_T **connections,
++                             const uint32_t num_connections,
++                             VCHI_INSTANCE_T instance_handle );
++
++//When this is called, ensure that all services have no data pending.
++//Bulk transfers can remain 'queued'
++extern int32_t vchi_disconnect( VCHI_INSTANCE_T instance_handle );
++
++// Global control over bulk CRC checking
++extern int32_t vchi_crc_control( VCHI_CONNECTION_T *connection,
++                                 VCHI_CRC_CONTROL_T control );
++
++// helper functions
++extern void * vchi_allocate_buffer(VCHI_SERVICE_HANDLE_T handle, uint32_t *length);
++extern void vchi_free_buffer(VCHI_SERVICE_HANDLE_T handle, void *address);
++extern uint32_t vchi_current_time(VCHI_INSTANCE_T instance_handle);
++
++
++/******************************************************************************
++ Global service API
++ *****************************************************************************/
++// Routine to create a named service
++extern int32_t vchi_service_create( VCHI_INSTANCE_T instance_handle,
++                                    SERVICE_CREATION_T *setup,
++                                    VCHI_SERVICE_HANDLE_T *handle );
++
++// Routine to destory a service
++extern int32_t vchi_service_destroy( const VCHI_SERVICE_HANDLE_T handle );
++
++// Routine to open a named service
++extern int32_t vchi_service_open( VCHI_INSTANCE_T instance_handle,
++                                  SERVICE_CREATION_T *setup,
++                                  VCHI_SERVICE_HANDLE_T *handle);
++
++extern int32_t vchi_get_peer_version( const VCHI_SERVICE_HANDLE_T handle,
++                                      short *peer_version );
++
++// Routine to close a named service
++extern int32_t vchi_service_close( const VCHI_SERVICE_HANDLE_T handle );
++
++// Routine to increment ref count on a named service
++extern int32_t vchi_service_use( const VCHI_SERVICE_HANDLE_T handle );
++
++// Routine to decrement ref count on a named service
++extern int32_t vchi_service_release( const VCHI_SERVICE_HANDLE_T handle );
++
++// Routine to send a message accross a service
++extern int32_t vchi_msg_queue( VCHI_SERVICE_HANDLE_T handle,
++                               const void *data,
++                               uint32_t data_size,
++                               VCHI_FLAGS_T flags,
++                               void *msg_handle );
++
++// scatter-gather (vector) and send message
++int32_t vchi_msg_queuev_ex( VCHI_SERVICE_HANDLE_T handle,
++                            VCHI_MSG_VECTOR_EX_T *vector,
++                            uint32_t count,
++                            VCHI_FLAGS_T flags,
++                            void *msg_handle );
++
++// legacy scatter-gather (vector) and send message, only handles pointers
++int32_t vchi_msg_queuev( VCHI_SERVICE_HANDLE_T handle,
++                         VCHI_MSG_VECTOR_T *vector,
++                         uint32_t count,
++                         VCHI_FLAGS_T flags,
++                         void *msg_handle );
++
++// Routine to receive a msg from a service
++// Dequeue is equivalent to hold, copy into client buffer, release
++extern int32_t vchi_msg_dequeue( VCHI_SERVICE_HANDLE_T handle,
++                                 void *data,
++                                 uint32_t max_data_size_to_read,
++                                 uint32_t *actual_msg_size,
++                                 VCHI_FLAGS_T flags );
++
++// Routine to look at a message in place.
++// The message is not dequeued, so a subsequent call to peek or dequeue
++// will return the same message.
++extern int32_t vchi_msg_peek( VCHI_SERVICE_HANDLE_T handle,
++                              void **data,
++                              uint32_t *msg_size,
++                              VCHI_FLAGS_T flags );
++
++// Routine to remove a message after it has been read in place with peek
++// The first message on the queue is dequeued.
++extern int32_t vchi_msg_remove( VCHI_SERVICE_HANDLE_T handle );
++
++// Routine to look at a message in place.
++// The message is dequeued, so the caller is left holding it; the descriptor is
++// filled in and must be released when the user has finished with the message.
++extern int32_t vchi_msg_hold( VCHI_SERVICE_HANDLE_T handle,
++                              void **data,        // } may be NULL, as info can be
++                              uint32_t *msg_size, // } obtained from HELD_MSG_T
++                              VCHI_FLAGS_T flags,
++                              VCHI_HELD_MSG_T *message_descriptor );
++
++// Initialise an iterator to look through messages in place
++extern int32_t vchi_msg_look_ahead( VCHI_SERVICE_HANDLE_T handle,
++                                    VCHI_MSG_ITER_T *iter,
++                                    VCHI_FLAGS_T flags );
++
++/******************************************************************************
++ Global service support API - operations on held messages and message iterators
++ *****************************************************************************/
++
++// Routine to get the address of a held message
++extern void *vchi_held_msg_ptr( const VCHI_HELD_MSG_T *message );
++
++// Routine to get the size of a held message
++extern int32_t vchi_held_msg_size( const VCHI_HELD_MSG_T *message );
++
++// Routine to get the transmit timestamp as written into the header by the peer
++extern uint32_t vchi_held_msg_tx_timestamp( const VCHI_HELD_MSG_T *message );
++
++// Routine to get the reception timestamp, written as we parsed the header
++extern uint32_t vchi_held_msg_rx_timestamp( const VCHI_HELD_MSG_T *message );
++
++// Routine to release a held message after it has been processed
++extern int32_t vchi_held_msg_release( VCHI_HELD_MSG_T *message );
++
++// Indicates whether the iterator has a next message.
++extern int32_t vchi_msg_iter_has_next( const VCHI_MSG_ITER_T *iter );
++
++// Return the pointer and length for the next message and advance the iterator.
++extern int32_t vchi_msg_iter_next( VCHI_MSG_ITER_T *iter,
++                                   void **data,
++                                   uint32_t *msg_size );
++
++// Remove the last message returned by vchi_msg_iter_next.
++// Can only be called once after each call to vchi_msg_iter_next.
++extern int32_t vchi_msg_iter_remove( VCHI_MSG_ITER_T *iter );
++
++// Hold the last message returned by vchi_msg_iter_next.
++// Can only be called once after each call to vchi_msg_iter_next.
++extern int32_t vchi_msg_iter_hold( VCHI_MSG_ITER_T *iter,
++                                   VCHI_HELD_MSG_T *message );
++
++// Return information for the next message, and hold it, advancing the iterator.
++extern int32_t vchi_msg_iter_hold_next( VCHI_MSG_ITER_T *iter,
++                                        void **data,        // } may be NULL
++                                        uint32_t *msg_size, // }
++                                        VCHI_HELD_MSG_T *message );
++
++
++/******************************************************************************
++ Global bulk API
++ *****************************************************************************/
++
++// Routine to prepare interface for a transfer from the other side
++extern int32_t vchi_bulk_queue_receive( VCHI_SERVICE_HANDLE_T handle,
++                                        void *data_dst,
++                                        uint32_t data_size,
++                                        VCHI_FLAGS_T flags,
++                                        void *transfer_handle );
++
++
++// Prepare interface for a transfer from the other side into relocatable memory.
++int32_t vchi_bulk_queue_receive_reloc( const VCHI_SERVICE_HANDLE_T handle,
++                                       VCHI_MEM_HANDLE_T h_dst,
++                                       uint32_t offset,
++                                       uint32_t data_size,
++                                       const VCHI_FLAGS_T flags,
++                                       void * const bulk_handle );
++
++// Routine to queue up data ready for transfer to the other (once they have signalled they are ready)
++extern int32_t vchi_bulk_queue_transmit( VCHI_SERVICE_HANDLE_T handle,
++                                         const void *data_src,
++                                         uint32_t data_size,
++                                         VCHI_FLAGS_T flags,
++                                         void *transfer_handle );
++
++
++/******************************************************************************
++ Configuration plumbing
++ *****************************************************************************/
++
++// function prototypes for the different mid layers (the state info gives the different physical connections)
++extern const VCHI_CONNECTION_API_T *single_get_func_table( void );
++//extern const VCHI_CONNECTION_API_T *local_server_get_func_table( void );
++//extern const VCHI_CONNECTION_API_T *local_client_get_func_table( void );
++
++// declare all message drivers here
++const VCHI_MESSAGE_DRIVER_T *vchi_mphi_message_driver_func_table( void );
++
++#ifdef __cplusplus
++}
++#endif
++
++extern int32_t vchi_bulk_queue_transmit_reloc( VCHI_SERVICE_HANDLE_T handle,
++                                               VCHI_MEM_HANDLE_T h_src,
++                                               uint32_t offset,
++                                               uint32_t data_size,
++                                               VCHI_FLAGS_T flags,
++                                               void *transfer_handle );
++#endif /* VCHI_H_ */
++
++/****************************** End of file **********************************/
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchi/vchi_mh.h linux-raspberry-pi/drivers/misc/vc04_services/interface/vchi/vchi_mh.h
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchi/vchi_mh.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchi/vchi_mh.h	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,42 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHI_MH_H_
++#define VCHI_MH_H_
++
++#include <linux/types.h>
++
++typedef int32_t VCHI_MEM_HANDLE_T;
++#define VCHI_MEM_HANDLE_INVALID 0
++
++#endif
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,561 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/pagemap.h>
++#include <linux/dma-mapping.h>
++#include <linux/version.h>
++#include <linux/io.h>
++#include <linux/uaccess.h>
++#include <asm/pgtable.h>
++
++#include <mach/irqs.h>
++
++#include <mach/platform.h>
++#include <mach/vcio.h>
++
++#define TOTAL_SLOTS (VCHIQ_SLOT_ZERO_SLOTS + 2 * 32)
++
++#define VCHIQ_DOORBELL_IRQ IRQ_ARM_DOORBELL_0
++#define VCHIQ_ARM_ADDRESS(x) ((void *)__virt_to_bus((unsigned)x))
++
++#include "vchiq_arm.h"
++#include "vchiq_2835.h"
++#include "vchiq_connected.h"
++
++#define MAX_FRAGMENTS (VCHIQ_NUM_CURRENT_BULKS * 2)
++
++typedef struct vchiq_2835_state_struct {
++   int inited;
++   VCHIQ_ARM_STATE_T arm_state;
++} VCHIQ_2835_ARM_STATE_T;
++
++static char *g_slot_mem;
++static int g_slot_mem_size;
++dma_addr_t g_slot_phys;
++static FRAGMENTS_T *g_fragments_base;
++static FRAGMENTS_T *g_free_fragments;
++struct semaphore g_free_fragments_sema;
++
++extern int vchiq_arm_log_level;
++
++static DEFINE_SEMAPHORE(g_free_fragments_mutex);
++
++static irqreturn_t
++vchiq_doorbell_irq(int irq, void *dev_id);
++
++static int
++create_pagelist(char __user *buf, size_t count, unsigned short type,
++                struct task_struct *task, PAGELIST_T ** ppagelist);
++
++static void
++free_pagelist(PAGELIST_T *pagelist, int actual);
++
++int __init
++vchiq_platform_init(VCHIQ_STATE_T *state)
++{
++	VCHIQ_SLOT_ZERO_T *vchiq_slot_zero;
++	int frag_mem_size;
++	int err;
++	int i;
++
++	/* Allocate space for the channels in coherent memory */
++	g_slot_mem_size = PAGE_ALIGN(TOTAL_SLOTS * VCHIQ_SLOT_SIZE);
++	frag_mem_size = PAGE_ALIGN(sizeof(FRAGMENTS_T) * MAX_FRAGMENTS);
++
++	g_slot_mem = dma_alloc_coherent(NULL, g_slot_mem_size + frag_mem_size,
++		&g_slot_phys, GFP_ATOMIC);
++
++	if (!g_slot_mem) {
++		vchiq_log_error(vchiq_arm_log_level,
++			"Unable to allocate channel memory");
++		err = -ENOMEM;
++		goto failed_alloc;
++	}
++
++	WARN_ON(((int)g_slot_mem & (PAGE_SIZE - 1)) != 0);
++
++	vchiq_slot_zero = vchiq_init_slots(g_slot_mem, g_slot_mem_size);
++	if (!vchiq_slot_zero) {
++		err = -EINVAL;
++		goto failed_init_slots;
++	}
++
++	vchiq_slot_zero->platform_data[VCHIQ_PLATFORM_FRAGMENTS_OFFSET_IDX] =
++		(int)g_slot_phys + g_slot_mem_size;
++	vchiq_slot_zero->platform_data[VCHIQ_PLATFORM_FRAGMENTS_COUNT_IDX] =
++		MAX_FRAGMENTS;
++
++	g_fragments_base = (FRAGMENTS_T *)(g_slot_mem + g_slot_mem_size);
++	g_slot_mem_size += frag_mem_size;
++
++	g_free_fragments = g_fragments_base;
++	for (i = 0; i < (MAX_FRAGMENTS - 1); i++) {
++		*(FRAGMENTS_T **)&g_fragments_base[i] =
++			&g_fragments_base[i + 1];
++	}
++	*(FRAGMENTS_T **)&g_fragments_base[i] = NULL;
++	sema_init(&g_free_fragments_sema, MAX_FRAGMENTS);
++
++	if (vchiq_init_state(state, vchiq_slot_zero, 0/*slave*/) !=
++		VCHIQ_SUCCESS) {
++		err = -EINVAL;
++		goto failed_vchiq_init;
++	}
++
++	err = request_irq(VCHIQ_DOORBELL_IRQ, vchiq_doorbell_irq,
++		IRQF_IRQPOLL, "VCHIQ doorbell",
++		state);
++	if (err < 0) {
++		vchiq_log_error(vchiq_arm_log_level, "%s: failed to register "
++			"irq=%d err=%d", __func__,
++			VCHIQ_DOORBELL_IRQ, err);
++		goto failed_request_irq;
++	}
++
++	/* Send the base address of the slots to VideoCore */
++
++	dsb(); /* Ensure all writes have completed */
++
++	bcm_mailbox_write(MBOX_CHAN_VCHIQ, (unsigned int)g_slot_phys);
++
++	vchiq_log_info(vchiq_arm_log_level,
++		"vchiq_init - done (slots %x, phys %x)",
++		(unsigned int)vchiq_slot_zero, g_slot_phys);
++
++   vchiq_call_connected_callbacks();
++
++   return 0;
++
++failed_request_irq:
++failed_vchiq_init:
++failed_init_slots:
++   dma_free_coherent(NULL, g_slot_mem_size, g_slot_mem, g_slot_phys);
++
++failed_alloc:
++   return err;
++}
++
++void __exit
++vchiq_platform_exit(VCHIQ_STATE_T *state)
++{
++   free_irq(VCHIQ_DOORBELL_IRQ, state);
++   dma_free_coherent(NULL, g_slot_mem_size,
++                     g_slot_mem, g_slot_phys);
++}
++
++
++VCHIQ_STATUS_T
++vchiq_platform_init_state(VCHIQ_STATE_T *state)
++{
++   VCHIQ_STATUS_T status = VCHIQ_SUCCESS;
++   state->platform_state = kzalloc(sizeof(VCHIQ_2835_ARM_STATE_T), GFP_KERNEL);
++   ((VCHIQ_2835_ARM_STATE_T*)state->platform_state)->inited = 1;
++   status = vchiq_arm_init_state(state, &((VCHIQ_2835_ARM_STATE_T*)state->platform_state)->arm_state);
++   if(status != VCHIQ_SUCCESS)
++   {
++      ((VCHIQ_2835_ARM_STATE_T*)state->platform_state)->inited = 0;
++   }
++   return status;
++}
++
++VCHIQ_ARM_STATE_T*
++vchiq_platform_get_arm_state(VCHIQ_STATE_T *state)
++{
++   if(!((VCHIQ_2835_ARM_STATE_T*)state->platform_state)->inited)
++   {
++      BUG();
++   }
++   return &((VCHIQ_2835_ARM_STATE_T*)state->platform_state)->arm_state;
++}
++
++void
++remote_event_signal(REMOTE_EVENT_T *event)
++{
++	wmb();
++
++	event->fired = 1;
++
++	dsb();         /* data barrier operation */
++
++	if (event->armed) {
++		/* trigger vc interrupt */
++
++		writel(0, __io_address(ARM_0_BELL2));
++	}
++}
++
++int
++vchiq_copy_from_user(void *dst, const void *src, int size)
++{
++	if ((uint32_t)src < TASK_SIZE) {
++		return copy_from_user(dst, src, size);
++	} else {
++		memcpy(dst, src, size);
++		return 0;
++	}
++}
++
++VCHIQ_STATUS_T
++vchiq_prepare_bulk_data(VCHIQ_BULK_T *bulk, VCHI_MEM_HANDLE_T memhandle,
++	void *offset, int size, int dir)
++{
++	PAGELIST_T *pagelist;
++	int ret;
++
++	WARN_ON(memhandle != VCHI_MEM_HANDLE_INVALID);
++
++	ret = create_pagelist((char __user *)offset, size,
++			(dir == VCHIQ_BULK_RECEIVE)
++			? PAGELIST_READ
++			: PAGELIST_WRITE,
++			current,
++			&pagelist);
++	if (ret != 0)
++		return VCHIQ_ERROR;
++
++	bulk->handle = memhandle;
++	bulk->data = VCHIQ_ARM_ADDRESS(pagelist);
++
++	/* Store the pagelist address in remote_data, which isn't used by the
++	   slave. */
++	bulk->remote_data = pagelist;
++
++	return VCHIQ_SUCCESS;
++}
++
++void
++vchiq_complete_bulk(VCHIQ_BULK_T *bulk)
++{
++	if (bulk && bulk->remote_data && bulk->actual)
++		free_pagelist((PAGELIST_T *)bulk->remote_data, bulk->actual);
++}
++
++void
++vchiq_transfer_bulk(VCHIQ_BULK_T *bulk)
++{
++	/*
++	 * This should only be called on the master (VideoCore) side, but
++	 * provide an implementation to avoid the need for ifdefery.
++	 */
++	BUG();
++}
++
++void
++vchiq_dump_platform_state(void *dump_context)
++{
++	char buf[80];
++	int len;
++	len = snprintf(buf, sizeof(buf),
++		"  Platform: 2835 (VC master)");
++	vchiq_dump(dump_context, buf, len + 1);
++}
++
++VCHIQ_STATUS_T
++vchiq_platform_suspend(VCHIQ_STATE_T *state)
++{
++   return VCHIQ_ERROR;
++}
++
++VCHIQ_STATUS_T
++vchiq_platform_resume(VCHIQ_STATE_T *state)
++{
++   return VCHIQ_SUCCESS;
++}
++
++void
++vchiq_platform_paused(VCHIQ_STATE_T *state)
++{
++}
++
++void
++vchiq_platform_resumed(VCHIQ_STATE_T *state)
++{
++}
++
++int
++vchiq_platform_videocore_wanted(VCHIQ_STATE_T* state)
++{
++   return 1; // autosuspend not supported - videocore always wanted
++}
++
++int
++vchiq_platform_use_suspend_timer(void)
++{
++   return 0;
++}
++void
++vchiq_dump_platform_use_state(VCHIQ_STATE_T *state)
++{
++	vchiq_log_info((vchiq_arm_log_level>=VCHIQ_LOG_INFO),"Suspend timer not in use");
++}
++void
++vchiq_platform_handle_timeout(VCHIQ_STATE_T *state)
++{
++	(void)state;
++}
++/*
++ * Local functions
++ */
++
++static irqreturn_t
++vchiq_doorbell_irq(int irq, void *dev_id)
++{
++	VCHIQ_STATE_T *state = dev_id;
++	irqreturn_t ret = IRQ_NONE;
++	unsigned int status;
++
++	/* Read (and clear) the doorbell */
++	status = readl(__io_address(ARM_0_BELL0));
++
++	if (status & 0x4) {  /* Was the doorbell rung? */
++		remote_event_pollall(state);
++		ret = IRQ_HANDLED;
++	}
++
++	return ret;
++}
++
++/* There is a potential problem with partial cache lines (pages?)
++** at the ends of the block when reading. If the CPU accessed anything in
++** the same line (page?) then it may have pulled old data into the cache,
++** obscuring the new data underneath. We can solve this by transferring the
++** partial cache lines separately, and allowing the ARM to copy into the
++** cached area.
++
++** N.B. This implementation plays slightly fast and loose with the Linux
++** driver programming rules, e.g. its use of __virt_to_bus instead of
++** dma_map_single, but it isn't a multi-platform driver and it benefits
++** from increased speed as a result.
++*/
++
++static int
++create_pagelist(char __user *buf, size_t count, unsigned short type,
++	struct task_struct *task, PAGELIST_T ** ppagelist)
++{
++	PAGELIST_T *pagelist;
++	struct page **pages;
++	struct page *page;
++	unsigned long *addrs;
++	unsigned int num_pages, offset, i;
++	char *addr, *base_addr, *next_addr;
++	int run, addridx, actual_pages;
++        unsigned long *need_release;
++
++	offset = (unsigned int)buf & (PAGE_SIZE - 1);
++	num_pages = (count + offset + PAGE_SIZE - 1) / PAGE_SIZE;
++
++	*ppagelist = NULL;
++
++	/* Allocate enough storage to hold the page pointers and the page
++	** list
++	*/
++	pagelist = kmalloc(sizeof(PAGELIST_T) +
++                           (num_pages * sizeof(unsigned long)) +
++                           sizeof(unsigned long) +
++                           (num_pages * sizeof(pages[0])),
++                           GFP_KERNEL);
++
++	vchiq_log_trace(vchiq_arm_log_level,
++		"create_pagelist - %x", (unsigned int)pagelist);
++	if (!pagelist)
++		return -ENOMEM;
++
++	addrs = pagelist->addrs;
++        need_release = (unsigned long *)(addrs + num_pages);
++	pages = (struct page **)(addrs + num_pages + 1);
++
++	if (is_vmalloc_addr(buf)) {
++		for (actual_pages = 0; actual_pages < num_pages; actual_pages++) {
++			pages[actual_pages] = vmalloc_to_page(buf + (actual_pages * PAGE_SIZE));
++		}
++                *need_release = 0; /* do not try and release vmalloc pages */
++	} else {
++		down_read(&task->mm->mmap_sem);
++		actual_pages = get_user_pages(task, task->mm,
++				          (unsigned long)buf & ~(PAGE_SIZE - 1),
++					  num_pages,
++					  (type == PAGELIST_READ) /*Write */ ,
++					  0 /*Force */ ,
++					  pages,
++					  NULL /*vmas */);
++		up_read(&task->mm->mmap_sem);
++
++		if (actual_pages != num_pages) {
++			vchiq_log_info(vchiq_arm_log_level,
++				       "create_pagelist - only %d/%d pages locked",
++				       actual_pages,
++				       num_pages);
++
++			/* This is probably due to the process being killed */
++			while (actual_pages > 0)
++			{
++				actual_pages--;
++				page_cache_release(pages[actual_pages]);
++			}
++			kfree(pagelist);
++			if (actual_pages == 0)
++				actual_pages = -ENOMEM;
++			return actual_pages;
++		}
++                *need_release = 1; /* release user pages */
++	}
++
++	pagelist->length = count;
++	pagelist->type = type;
++	pagelist->offset = offset;
++
++	/* Group the pages into runs of contiguous pages */
++
++	base_addr = VCHIQ_ARM_ADDRESS(page_address(pages[0]));
++	next_addr = base_addr + PAGE_SIZE;
++	addridx = 0;
++	run = 0;
++
++	for (i = 1; i < num_pages; i++) {
++		addr = VCHIQ_ARM_ADDRESS(page_address(pages[i]));
++		if ((addr == next_addr) && (run < (PAGE_SIZE - 1))) {
++			next_addr += PAGE_SIZE;
++			run++;
++		} else {
++			addrs[addridx] = (unsigned long)base_addr + run;
++			addridx++;
++			base_addr = addr;
++			next_addr = addr + PAGE_SIZE;
++			run = 0;
++		}
++	}
++
++	addrs[addridx] = (unsigned long)base_addr + run;
++	addridx++;
++
++	/* Partial cache lines (fragments) require special measures */
++	if ((type == PAGELIST_READ) &&
++		((pagelist->offset & (CACHE_LINE_SIZE - 1)) ||
++		((pagelist->offset + pagelist->length) &
++		(CACHE_LINE_SIZE - 1)))) {
++		FRAGMENTS_T *fragments;
++
++		if (down_interruptible(&g_free_fragments_sema) != 0) {
++			kfree(pagelist);
++			return -EINTR;
++		}
++
++		WARN_ON(g_free_fragments == NULL);
++
++		down(&g_free_fragments_mutex);
++		fragments = (FRAGMENTS_T *) g_free_fragments;
++		WARN_ON(fragments == NULL);
++		g_free_fragments = *(FRAGMENTS_T **) g_free_fragments;
++		up(&g_free_fragments_mutex);
++		pagelist->type =
++			 PAGELIST_READ_WITH_FRAGMENTS + (fragments -
++							 g_fragments_base);
++	}
++
++	for (page = virt_to_page(pagelist);
++		page <= virt_to_page(addrs + num_pages - 1); page++) {
++		flush_dcache_page(page);
++	}
++
++	*ppagelist = pagelist;
++
++	return 0;
++}
++
++static void
++free_pagelist(PAGELIST_T *pagelist, int actual)
++{
++        unsigned long *need_release;
++	struct page **pages;
++	unsigned int num_pages, i;
++
++	vchiq_log_trace(vchiq_arm_log_level,
++		"free_pagelist - %x, %d", (unsigned int)pagelist, actual);
++
++	num_pages =
++		(pagelist->length + pagelist->offset + PAGE_SIZE - 1) /
++		PAGE_SIZE;
++
++        need_release = (unsigned long *)(pagelist->addrs + num_pages);
++	pages = (struct page **)(pagelist->addrs + num_pages + 1);
++
++	/* Deal with any partial cache lines (fragments) */
++	if (pagelist->type >= PAGELIST_READ_WITH_FRAGMENTS) {
++		FRAGMENTS_T *fragments = g_fragments_base +
++			(pagelist->type - PAGELIST_READ_WITH_FRAGMENTS);
++		int head_bytes, tail_bytes;
++		head_bytes = (CACHE_LINE_SIZE - pagelist->offset) &
++			(CACHE_LINE_SIZE - 1);
++		tail_bytes = (pagelist->offset + actual) &
++			(CACHE_LINE_SIZE - 1);
++
++		if ((actual >= 0) && (head_bytes != 0)) {
++			if (head_bytes > actual)
++				head_bytes = actual;
++
++			memcpy((char *)page_address(pages[0]) +
++				pagelist->offset,
++				fragments->headbuf,
++				head_bytes);
++		}
++		if ((actual >= 0) && (head_bytes < actual) &&
++			(tail_bytes != 0)) {
++			memcpy((char *)page_address(pages[num_pages - 1]) +
++				((pagelist->offset + actual) &
++				(PAGE_SIZE - 1) & ~(CACHE_LINE_SIZE - 1)),
++				fragments->tailbuf, tail_bytes);
++		}
++
++		down(&g_free_fragments_mutex);
++		*(FRAGMENTS_T **) fragments = g_free_fragments;
++		g_free_fragments = fragments;
++		up(&g_free_fragments_mutex);
++		up(&g_free_fragments_sema);
++	}
++
++        if (*need_release) {
++		for (i = 0; i < num_pages; i++) {
++			if (pagelist->type != PAGELIST_WRITE)
++				set_page_dirty(pages[i]);
++
++			page_cache_release(pages[i]);
++		}
++        }
++
++	kfree(pagelist);
++}
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835.h linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835.h
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835.h	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,42 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHIQ_2835_H
++#define VCHIQ_2835_H
++
++#include "vchiq_pagelist.h"
++
++#define VCHIQ_PLATFORM_FRAGMENTS_OFFSET_IDX 0
++#define VCHIQ_PLATFORM_FRAGMENTS_COUNT_IDX  1
++
++#endif /* VCHIQ_2835_H */
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.c linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.c
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.c	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,2813 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/cdev.h>
++#include <linux/fs.h>
++#include <linux/device.h>
++#include <linux/mm.h>
++#include <linux/highmem.h>
++#include <linux/pagemap.h>
++#include <linux/bug.h>
++#include <linux/semaphore.h>
++#include <linux/list.h>
++#include <linux/proc_fs.h>
++
++#include "vchiq_core.h"
++#include "vchiq_ioctl.h"
++#include "vchiq_arm.h"
++
++#define DEVICE_NAME "vchiq"
++
++/* Override the default prefix, which would be vchiq_arm (from the filename) */
++#undef MODULE_PARAM_PREFIX
++#define MODULE_PARAM_PREFIX DEVICE_NAME "."
++
++#define VCHIQ_MINOR 0
++
++/* Some per-instance constants */
++#define MAX_COMPLETIONS 16
++#define MAX_SERVICES 64
++#define MAX_ELEMENTS 8
++#define MSG_QUEUE_SIZE 64
++
++#define KEEPALIVE_VER 1
++#define KEEPALIVE_VER_MIN KEEPALIVE_VER
++
++/* Run time control of log level, based on KERN_XXX level. */
++int vchiq_arm_log_level = VCHIQ_LOG_DEFAULT;
++int vchiq_susp_log_level = VCHIQ_LOG_ERROR;
++
++#define SUSPEND_TIMER_TIMEOUT_MS 100
++#define SUSPEND_RETRY_TIMER_TIMEOUT_MS 1000
++
++#define VC_SUSPEND_NUM_OFFSET 3 /* number of values before idle which are -ve */
++static const char *const suspend_state_names[] = {
++	"VC_SUSPEND_FORCE_CANCELED",
++	"VC_SUSPEND_REJECTED",
++	"VC_SUSPEND_FAILED",
++	"VC_SUSPEND_IDLE",
++	"VC_SUSPEND_REQUESTED",
++	"VC_SUSPEND_IN_PROGRESS",
++	"VC_SUSPEND_SUSPENDED"
++};
++#define VC_RESUME_NUM_OFFSET 1 /* number of values before idle which are -ve */
++static const char *const resume_state_names[] = {
++	"VC_RESUME_FAILED",
++	"VC_RESUME_IDLE",
++	"VC_RESUME_REQUESTED",
++	"VC_RESUME_IN_PROGRESS",
++	"VC_RESUME_RESUMED"
++};
++/* The number of times we allow force suspend to timeout before actually
++** _forcing_ suspend.  This is to cater for SW which fails to release vchiq
++** correctly - we don't want to prevent ARM suspend indefinitely in this case.
++*/
++#define FORCE_SUSPEND_FAIL_MAX 8
++
++/* The time in ms allowed for videocore to go idle when force suspend has been
++ * requested */
++#define FORCE_SUSPEND_TIMEOUT_MS 200
++
++
++static void suspend_timer_callback(unsigned long context);
++static int vchiq_proc_add_instance(VCHIQ_INSTANCE_T instance);
++static void vchiq_proc_remove_instance(VCHIQ_INSTANCE_T instance);
++
++
++typedef struct user_service_struct {
++	VCHIQ_SERVICE_T *service;
++	void *userdata;
++	VCHIQ_INSTANCE_T instance;
++	int is_vchi;
++	int dequeue_pending;
++	int message_available_pos;
++	int msg_insert;
++	int msg_remove;
++	struct semaphore insert_event;
++	struct semaphore remove_event;
++	VCHIQ_HEADER_T * msg_queue[MSG_QUEUE_SIZE];
++} USER_SERVICE_T;
++
++struct bulk_waiter_node {
++	struct bulk_waiter bulk_waiter;
++	int pid;
++	struct list_head list;
++};
++
++struct vchiq_instance_struct {
++	VCHIQ_STATE_T *state;
++	VCHIQ_COMPLETION_DATA_T completions[MAX_COMPLETIONS];
++	int completion_insert;
++	int completion_remove;
++	struct semaphore insert_event;
++	struct semaphore remove_event;
++	struct mutex completion_mutex;
++
++	int connected;
++	int closing;
++	int pid;
++	int mark;
++
++	struct list_head bulk_waiter_list;
++	struct mutex bulk_waiter_list_mutex;
++
++	struct proc_dir_entry *proc_entry;
++};
++
++typedef struct dump_context_struct {
++	char __user *buf;
++	size_t actual;
++	size_t space;
++	loff_t offset;
++} DUMP_CONTEXT_T;
++
++static struct cdev    vchiq_cdev;
++static dev_t          vchiq_devid;
++static VCHIQ_STATE_T g_state;
++static struct class  *vchiq_class;
++static struct device *vchiq_dev;
++static DEFINE_SPINLOCK(msg_queue_spinlock);
++
++static const char *const ioctl_names[] = {
++	"CONNECT",
++	"SHUTDOWN",
++	"CREATE_SERVICE",
++	"REMOVE_SERVICE",
++	"QUEUE_MESSAGE",
++	"QUEUE_BULK_TRANSMIT",
++	"QUEUE_BULK_RECEIVE",
++	"AWAIT_COMPLETION",
++	"DEQUEUE_MESSAGE",
++	"GET_CLIENT_ID",
++	"GET_CONFIG",
++	"CLOSE_SERVICE",
++	"USE_SERVICE",
++	"RELEASE_SERVICE",
++	"SET_SERVICE_OPTION",
++	"DUMP_PHYS_MEM"
++};
++
++vchiq_static_assert((sizeof(ioctl_names)/sizeof(ioctl_names[0])) ==
++	(VCHIQ_IOC_MAX + 1));
++
++static void
++dump_phys_mem(void *virt_addr, uint32_t num_bytes);
++
++/****************************************************************************
++*
++*   add_completion
++*
++***************************************************************************/
++
++static VCHIQ_STATUS_T
++add_completion(VCHIQ_INSTANCE_T instance, VCHIQ_REASON_T reason,
++	VCHIQ_HEADER_T *header, USER_SERVICE_T *user_service,
++	void *bulk_userdata)
++{
++	VCHIQ_COMPLETION_DATA_T *completion;
++	DEBUG_INITIALISE(g_state.local)
++
++	while (instance->completion_insert ==
++		(instance->completion_remove + MAX_COMPLETIONS)) {
++		/* Out of space - wait for the client */
++		DEBUG_TRACE(SERVICE_CALLBACK_LINE);
++		vchiq_log_trace(vchiq_arm_log_level,
++			"add_completion - completion queue full");
++		DEBUG_COUNT(COMPLETION_QUEUE_FULL_COUNT);
++		if (down_interruptible(&instance->remove_event) != 0) {
++			vchiq_log_info(vchiq_arm_log_level,
++				"service_callback interrupted");
++			return VCHIQ_RETRY;
++		} else if (instance->closing) {
++			vchiq_log_info(vchiq_arm_log_level,
++				"service_callback closing");
++			return VCHIQ_ERROR;
++		}
++		DEBUG_TRACE(SERVICE_CALLBACK_LINE);
++	}
++
++	completion =
++		 &instance->completions[instance->completion_insert &
++		 (MAX_COMPLETIONS - 1)];
++
++	completion->header = header;
++	completion->reason = reason;
++	/* N.B. service_userdata is updated while processing AWAIT_COMPLETION */
++	completion->service_userdata = user_service->service;
++	completion->bulk_userdata = bulk_userdata;
++
++	if (reason == VCHIQ_SERVICE_CLOSED)
++		/* Take an extra reference, to be held until
++		   this CLOSED notification is delivered. */
++		lock_service(user_service->service);
++
++	/* A write barrier is needed here to ensure that the entire completion
++		record is written out before the insert point. */
++	wmb();
++
++	if (reason == VCHIQ_MESSAGE_AVAILABLE)
++		user_service->message_available_pos =
++			instance->completion_insert;
++	instance->completion_insert++;
++
++	up(&instance->insert_event);
++
++	return VCHIQ_SUCCESS;
++}
++
++/****************************************************************************
++*
++*   service_callback
++*
++***************************************************************************/
++
++static VCHIQ_STATUS_T
++service_callback(VCHIQ_REASON_T reason, VCHIQ_HEADER_T *header,
++	VCHIQ_SERVICE_HANDLE_T handle, void *bulk_userdata)
++{
++	/* How do we ensure the callback goes to the right client?
++	** The service_user data points to a USER_SERVICE_T record containing
++	** the original callback and the user state structure, which contains a
++	** circular buffer for completion records.
++	*/
++	USER_SERVICE_T *user_service;
++	VCHIQ_SERVICE_T *service;
++	VCHIQ_INSTANCE_T instance;
++	DEBUG_INITIALISE(g_state.local)
++
++	DEBUG_TRACE(SERVICE_CALLBACK_LINE);
++
++	service = handle_to_service(handle);
++	BUG_ON(!service);
++	user_service = (USER_SERVICE_T *)service->base.userdata;
++	instance = user_service->instance;
++
++	if (!instance || instance->closing)
++		return VCHIQ_SUCCESS;
++
++	vchiq_log_trace(vchiq_arm_log_level,
++		"service_callback - service %lx(%d), reason %d, header %lx, "
++		"instance %lx, bulk_userdata %lx",
++		(unsigned long)user_service,
++		service->localport,
++		reason, (unsigned long)header,
++		(unsigned long)instance, (unsigned long)bulk_userdata);
++
++	if (header && user_service->is_vchi) {
++		spin_lock(&msg_queue_spinlock);
++		while (user_service->msg_insert ==
++			(user_service->msg_remove + MSG_QUEUE_SIZE)) {
++			spin_unlock(&msg_queue_spinlock);
++			DEBUG_TRACE(SERVICE_CALLBACK_LINE);
++			DEBUG_COUNT(MSG_QUEUE_FULL_COUNT);
++			vchiq_log_trace(vchiq_arm_log_level,
++				"service_callback - msg queue full");
++			/* If there is no MESSAGE_AVAILABLE in the completion
++			** queue, add one
++			*/
++			if ((user_service->message_available_pos -
++				instance->completion_remove) < 0) {
++				VCHIQ_STATUS_T status;
++				vchiq_log_info(vchiq_arm_log_level,
++					"Inserting extra MESSAGE_AVAILABLE");
++				DEBUG_TRACE(SERVICE_CALLBACK_LINE);
++				status = add_completion(instance, reason,
++					NULL, user_service, bulk_userdata);
++				if (status != VCHIQ_SUCCESS) {
++					DEBUG_TRACE(SERVICE_CALLBACK_LINE);
++					return status;
++				}
++			}
++
++			DEBUG_TRACE(SERVICE_CALLBACK_LINE);
++			if (down_interruptible(&user_service->remove_event)
++				!= 0) {
++				vchiq_log_info(vchiq_arm_log_level,
++					"service_callback interrupted");
++				DEBUG_TRACE(SERVICE_CALLBACK_LINE);
++				return VCHIQ_RETRY;
++			} else if (instance->closing) {
++				vchiq_log_info(vchiq_arm_log_level,
++					"service_callback closing");
++				DEBUG_TRACE(SERVICE_CALLBACK_LINE);
++				return VCHIQ_ERROR;
++			}
++			DEBUG_TRACE(SERVICE_CALLBACK_LINE);
++			spin_lock(&msg_queue_spinlock);
++		}
++
++		user_service->msg_queue[user_service->msg_insert &
++			(MSG_QUEUE_SIZE - 1)] = header;
++		user_service->msg_insert++;
++		spin_unlock(&msg_queue_spinlock);
++
++		up(&user_service->insert_event);
++
++		/* If there is a thread waiting in DEQUEUE_MESSAGE, or if
++		** there is a MESSAGE_AVAILABLE in the completion queue then
++		** bypass the completion queue.
++		*/
++		if (((user_service->message_available_pos -
++			instance->completion_remove) >= 0) ||
++			user_service->dequeue_pending) {
++			DEBUG_TRACE(SERVICE_CALLBACK_LINE);
++			user_service->dequeue_pending = 0;
++			return VCHIQ_SUCCESS;
++		}
++
++		header = NULL;
++	}
++	DEBUG_TRACE(SERVICE_CALLBACK_LINE);
++
++	return add_completion(instance, reason, header, user_service,
++		bulk_userdata);
++}
++
++/****************************************************************************
++*
++*   user_service_free
++*
++***************************************************************************/
++static void
++user_service_free(void *userdata)
++{
++	kfree(userdata);
++}
++
++/****************************************************************************
++*
++*   vchiq_ioctl
++*
++***************************************************************************/
++
++static long
++vchiq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
++{
++	VCHIQ_INSTANCE_T instance = file->private_data;
++	VCHIQ_STATUS_T status = VCHIQ_SUCCESS;
++	VCHIQ_SERVICE_T *service = NULL;
++	long ret = 0;
++	int i, rc;
++	DEBUG_INITIALISE(g_state.local)
++
++	vchiq_log_trace(vchiq_arm_log_level,
++		 "vchiq_ioctl - instance %x, cmd %s, arg %lx",
++		(unsigned int)instance,
++		((_IOC_TYPE(cmd) == VCHIQ_IOC_MAGIC) &&
++		(_IOC_NR(cmd) <= VCHIQ_IOC_MAX)) ?
++		ioctl_names[_IOC_NR(cmd)] : "<invalid>", arg);
++
++	switch (cmd) {
++	case VCHIQ_IOC_SHUTDOWN:
++		if (!instance->connected)
++			break;
++
++		/* Remove all services */
++		i = 0;
++		while ((service = next_service_by_instance(instance->state,
++			instance, &i)) != NULL) {
++			status = vchiq_remove_service(service->handle);
++			unlock_service(service);
++			if (status != VCHIQ_SUCCESS)
++				break;
++		}
++		service = NULL;
++
++		if (status == VCHIQ_SUCCESS) {
++			/* Wake the completion thread and ask it to exit */
++			instance->closing = 1;
++			up(&instance->insert_event);
++		}
++
++		break;
++
++	case VCHIQ_IOC_CONNECT:
++		if (instance->connected) {
++			ret = -EINVAL;
++			break;
++		}
++		rc = mutex_lock_interruptible(&instance->state->mutex);
++		if (rc != 0) {
++			vchiq_log_error(vchiq_arm_log_level,
++				"vchiq: connect: could not lock mutex for "
++				"state %d: %d",
++				instance->state->id, rc);
++			ret = -EINTR;
++			break;
++		}
++		status = vchiq_connect_internal(instance->state, instance);
++		mutex_unlock(&instance->state->mutex);
++
++		if (status == VCHIQ_SUCCESS)
++			instance->connected = 1;
++		else
++			vchiq_log_error(vchiq_arm_log_level,
++				"vchiq: could not connect: %d", status);
++		break;
++
++	case VCHIQ_IOC_CREATE_SERVICE: {
++		VCHIQ_CREATE_SERVICE_T args;
++		USER_SERVICE_T *user_service = NULL;
++		void *userdata;
++		int srvstate;
++
++		if (copy_from_user
++			 (&args, (const void __user *)arg,
++			  sizeof(args)) != 0) {
++			ret = -EFAULT;
++			break;
++		}
++
++		user_service = kmalloc(sizeof(USER_SERVICE_T), GFP_KERNEL);
++		if (!user_service) {
++			ret = -ENOMEM;
++			break;
++		}
++
++		if (args.is_open) {
++			if (!instance->connected) {
++				ret = -ENOTCONN;
++				kfree(user_service);
++				break;
++			}
++			srvstate = VCHIQ_SRVSTATE_OPENING;
++		} else {
++			srvstate =
++				 instance->connected ?
++				 VCHIQ_SRVSTATE_LISTENING :
++				 VCHIQ_SRVSTATE_HIDDEN;
++		}
++
++		userdata = args.params.userdata;
++		args.params.callback = service_callback;
++		args.params.userdata = user_service;
++		service = vchiq_add_service_internal(
++				instance->state,
++				&args.params, srvstate,
++				instance, user_service_free);
++
++		if (service != NULL) {
++			user_service->service = service;
++			user_service->userdata = userdata;
++			user_service->instance = instance;
++			user_service->is_vchi = args.is_vchi;
++			user_service->dequeue_pending = 0;
++			user_service->message_available_pos =
++				instance->completion_remove - 1;
++			user_service->msg_insert = 0;
++			user_service->msg_remove = 0;
++			sema_init(&user_service->insert_event, 0);
++			sema_init(&user_service->remove_event, 0);
++
++			if (args.is_open) {
++				status = vchiq_open_service_internal
++					(service, instance->pid);
++				if (status != VCHIQ_SUCCESS) {
++					vchiq_remove_service(service->handle);
++					service = NULL;
++					ret = (status == VCHIQ_RETRY) ?
++						-EINTR : -EIO;
++					break;
++				}
++			}
++
++			if (copy_to_user((void __user *)
++				&(((VCHIQ_CREATE_SERVICE_T __user *)
++					arg)->handle),
++				(const void *)&service->handle,
++				sizeof(service->handle)) != 0) {
++				ret = -EFAULT;
++				vchiq_remove_service(service->handle);
++			}
++
++			service = NULL;
++		} else {
++			ret = -EEXIST;
++			kfree(user_service);
++		}
++	} break;
++
++	case VCHIQ_IOC_CLOSE_SERVICE: {
++		VCHIQ_SERVICE_HANDLE_T handle = (VCHIQ_SERVICE_HANDLE_T)arg;
++
++		service = find_service_for_instance(instance, handle);
++		if (service != NULL)
++			status = vchiq_close_service(service->handle);
++		else
++			ret = -EINVAL;
++	} break;
++
++	case VCHIQ_IOC_REMOVE_SERVICE: {
++		VCHIQ_SERVICE_HANDLE_T handle = (VCHIQ_SERVICE_HANDLE_T)arg;
++
++		service = find_service_for_instance(instance, handle);
++		if (service != NULL)
++			status = vchiq_remove_service(service->handle);
++		else
++			ret = -EINVAL;
++	} break;
++
++	case VCHIQ_IOC_USE_SERVICE:
++	case VCHIQ_IOC_RELEASE_SERVICE:	{
++		VCHIQ_SERVICE_HANDLE_T handle = (VCHIQ_SERVICE_HANDLE_T)arg;
++
++		service = find_service_for_instance(instance, handle);
++		if (service != NULL) {
++			status = (cmd == VCHIQ_IOC_USE_SERVICE)	?
++				vchiq_use_service_internal(service) :
++				vchiq_release_service_internal(service);
++			if (status != VCHIQ_SUCCESS) {
++				vchiq_log_error(vchiq_susp_log_level,
++					"%s: cmd %s returned error %d for "
++					"service %c%c%c%c:%03d",
++					__func__,
++					(cmd == VCHIQ_IOC_USE_SERVICE) ?
++						"VCHIQ_IOC_USE_SERVICE" :
++						"VCHIQ_IOC_RELEASE_SERVICE",
++					status,
++					VCHIQ_FOURCC_AS_4CHARS(
++						service->base.fourcc),
++					service->client_id);
++				ret = -EINVAL;
++			}
++		} else
++			ret = -EINVAL;
++	} break;
++
++	case VCHIQ_IOC_QUEUE_MESSAGE: {
++		VCHIQ_QUEUE_MESSAGE_T args;
++		if (copy_from_user
++			 (&args, (const void __user *)arg,
++			  sizeof(args)) != 0) {
++			ret = -EFAULT;
++			break;
++		}
++
++		service = find_service_for_instance(instance, args.handle);
++
++		if ((service != NULL) && (args.count <= MAX_ELEMENTS)) {
++			/* Copy elements into kernel space */
++			VCHIQ_ELEMENT_T elements[MAX_ELEMENTS];
++			if (copy_from_user(elements, args.elements,
++				args.count * sizeof(VCHIQ_ELEMENT_T)) == 0)
++				status = vchiq_queue_message
++					(args.handle,
++					elements, args.count);
++			else
++				ret = -EFAULT;
++		} else {
++			ret = -EINVAL;
++		}
++	} break;
++
++	case VCHIQ_IOC_QUEUE_BULK_TRANSMIT:
++	case VCHIQ_IOC_QUEUE_BULK_RECEIVE: {
++		VCHIQ_QUEUE_BULK_TRANSFER_T args;
++		struct bulk_waiter_node *waiter = NULL;
++		VCHIQ_BULK_DIR_T dir =
++			(cmd == VCHIQ_IOC_QUEUE_BULK_TRANSMIT) ?
++			VCHIQ_BULK_TRANSMIT : VCHIQ_BULK_RECEIVE;
++
++		if (copy_from_user
++			(&args, (const void __user *)arg,
++			sizeof(args)) != 0) {
++			ret = -EFAULT;
++			break;
++		}
++
++		service = find_service_for_instance(instance, args.handle);
++		if (!service) {
++			ret = -EINVAL;
++			break;
++		}
++
++		if (args.mode == VCHIQ_BULK_MODE_BLOCKING) {
++			waiter = kzalloc(sizeof(struct bulk_waiter_node),
++				GFP_KERNEL);
++			if (!waiter) {
++				ret = -ENOMEM;
++				break;
++			}
++			args.userdata = &waiter->bulk_waiter;
++		} else if (args.mode == VCHIQ_BULK_MODE_WAITING) {
++			struct list_head *pos;
++			mutex_lock(&instance->bulk_waiter_list_mutex);
++			list_for_each(pos, &instance->bulk_waiter_list) {
++				if (list_entry(pos, struct bulk_waiter_node,
++					list)->pid == current->pid) {
++					waiter = list_entry(pos,
++						struct bulk_waiter_node,
++						list);
++					list_del(pos);
++					break;
++				}
++
++			}
++			mutex_unlock(&instance->bulk_waiter_list_mutex);
++			if (!waiter) {
++				vchiq_log_error(vchiq_arm_log_level,
++					"no bulk_waiter found for pid %d",
++					current->pid);
++				ret = -ESRCH;
++				break;
++			}
++			vchiq_log_info(vchiq_arm_log_level,
++				"found bulk_waiter %x for pid %d",
++				(unsigned int)waiter, current->pid);
++			args.userdata = &waiter->bulk_waiter;
++		}
++		status = vchiq_bulk_transfer
++			(args.handle,
++			 VCHI_MEM_HANDLE_INVALID,
++			 args.data, args.size,
++			 args.userdata, args.mode,
++			 dir);
++		if (!waiter)
++			break;
++		if ((status != VCHIQ_RETRY) || fatal_signal_pending(current) ||
++			!waiter->bulk_waiter.bulk) {
++			if (waiter->bulk_waiter.bulk) {
++				/* Cancel the signal when the transfer
++				** completes. */
++				spin_lock(&bulk_waiter_spinlock);
++				waiter->bulk_waiter.bulk->userdata = NULL;
++				spin_unlock(&bulk_waiter_spinlock);
++			}
++			kfree(waiter);
++		} else {
++			const VCHIQ_BULK_MODE_T mode_waiting =
++				VCHIQ_BULK_MODE_WAITING;
++			waiter->pid = current->pid;
++			mutex_lock(&instance->bulk_waiter_list_mutex);
++			list_add(&waiter->list, &instance->bulk_waiter_list);
++			mutex_unlock(&instance->bulk_waiter_list_mutex);
++			vchiq_log_info(vchiq_arm_log_level,
++				"saved bulk_waiter %x for pid %d",
++				(unsigned int)waiter, current->pid);
++
++			if (copy_to_user((void __user *)
++				&(((VCHIQ_QUEUE_BULK_TRANSFER_T __user *)
++					arg)->mode),
++				(const void *)&mode_waiting,
++				sizeof(mode_waiting)) != 0)
++				ret = -EFAULT;
++		}
++	} break;
++
++	case VCHIQ_IOC_AWAIT_COMPLETION: {
++		VCHIQ_AWAIT_COMPLETION_T args;
++
++		DEBUG_TRACE(AWAIT_COMPLETION_LINE);
++		if (!instance->connected) {
++			ret = -ENOTCONN;
++			break;
++		}
++
++		if (copy_from_user(&args, (const void __user *)arg,
++			sizeof(args)) != 0) {
++			ret = -EFAULT;
++			break;
++		}
++
++		mutex_lock(&instance->completion_mutex);
++
++		DEBUG_TRACE(AWAIT_COMPLETION_LINE);
++		while ((instance->completion_remove ==
++			instance->completion_insert)
++			&& !instance->closing) {
++			int rc;
++			DEBUG_TRACE(AWAIT_COMPLETION_LINE);
++			mutex_unlock(&instance->completion_mutex);
++			rc = down_interruptible(&instance->insert_event);
++			mutex_lock(&instance->completion_mutex);
++			if (rc != 0) {
++				DEBUG_TRACE(AWAIT_COMPLETION_LINE);
++				vchiq_log_info(vchiq_arm_log_level,
++					"AWAIT_COMPLETION interrupted");
++				ret = -EINTR;
++				break;
++			}
++		}
++		DEBUG_TRACE(AWAIT_COMPLETION_LINE);
++
++		/* A read memory barrier is needed to stop prefetch of a stale
++		** completion record
++		*/
++		rmb();
++
++		if (ret == 0) {
++			int msgbufcount = args.msgbufcount;
++			for (ret = 0; ret < args.count; ret++) {
++				VCHIQ_COMPLETION_DATA_T *completion;
++				VCHIQ_SERVICE_T *service;
++				USER_SERVICE_T *user_service;
++				VCHIQ_HEADER_T *header;
++				if (instance->completion_remove ==
++					instance->completion_insert)
++					break;
++				completion = &instance->completions[
++					instance->completion_remove &
++					(MAX_COMPLETIONS - 1)];
++
++				service = completion->service_userdata;
++				user_service = service->base.userdata;
++				completion->service_userdata =
++					user_service->userdata;
++
++				header = completion->header;
++				if (header) {
++					void __user *msgbuf;
++					int msglen;
++
++					msglen = header->size +
++						sizeof(VCHIQ_HEADER_T);
++					/* This must be a VCHIQ-style service */
++					if (args.msgbufsize < msglen) {
++						vchiq_log_error(
++							vchiq_arm_log_level,
++							"header %x: msgbufsize"
++							" %x < msglen %x",
++							(unsigned int)header,
++							args.msgbufsize,
++							msglen);
++						WARN(1, "invalid message "
++							"size\n");
++						if (ret == 0)
++							ret = -EMSGSIZE;
++						break;
++					}
++					if (msgbufcount <= 0)
++						/* Stall here for lack of a
++						** buffer for the message. */
++						break;
++					/* Get the pointer from user space */
++					msgbufcount--;
++					if (copy_from_user(&msgbuf,
++						(const void __user *)
++						&args.msgbufs[msgbufcount],
++						sizeof(msgbuf)) != 0) {
++						if (ret == 0)
++							ret = -EFAULT;
++						break;
++					}
++
++					/* Copy the message to user space */
++					if (copy_to_user(msgbuf, header,
++						msglen) != 0) {
++						if (ret == 0)
++							ret = -EFAULT;
++						break;
++					}
++
++					/* Now it has been copied, the message
++					** can be released. */
++					vchiq_release_message(service->handle,
++						header);
++
++					/* The completion must point to the
++					** msgbuf. */
++					completion->header = msgbuf;
++				}
++
++				if (completion->reason ==
++					VCHIQ_SERVICE_CLOSED)
++					unlock_service(service);
++
++				if (copy_to_user((void __user *)(
++					(size_t)args.buf +
++					ret * sizeof(VCHIQ_COMPLETION_DATA_T)),
++					completion,
++					sizeof(VCHIQ_COMPLETION_DATA_T)) != 0) {
++						if (ret == 0)
++							ret = -EFAULT;
++					break;
++				}
++
++				instance->completion_remove++;
++			}
++
++			if (msgbufcount != args.msgbufcount) {
++				if (copy_to_user((void __user *)
++					&((VCHIQ_AWAIT_COMPLETION_T *)arg)->
++						msgbufcount,
++					&msgbufcount,
++					sizeof(msgbufcount)) != 0) {
++					ret = -EFAULT;
++				}
++			}
++		}
++
++		if (ret != 0)
++			up(&instance->remove_event);
++		mutex_unlock(&instance->completion_mutex);
++		DEBUG_TRACE(AWAIT_COMPLETION_LINE);
++	} break;
++
++	case VCHIQ_IOC_DEQUEUE_MESSAGE: {
++		VCHIQ_DEQUEUE_MESSAGE_T args;
++		USER_SERVICE_T *user_service;
++		VCHIQ_HEADER_T *header;
++
++		DEBUG_TRACE(DEQUEUE_MESSAGE_LINE);
++		if (copy_from_user
++			 (&args, (const void __user *)arg,
++			  sizeof(args)) != 0) {
++			ret = -EFAULT;
++			break;
++		}
++		service = find_service_for_instance(instance, args.handle);
++		if (!service) {
++			ret = -EINVAL;
++			break;
++		}
++		user_service = (USER_SERVICE_T *)service->base.userdata;
++		if (user_service->is_vchi == 0) {
++			ret = -EINVAL;
++			break;
++		}
++
++		spin_lock(&msg_queue_spinlock);
++		if (user_service->msg_remove == user_service->msg_insert) {
++			if (!args.blocking) {
++				spin_unlock(&msg_queue_spinlock);
++				DEBUG_TRACE(DEQUEUE_MESSAGE_LINE);
++				ret = -EWOULDBLOCK;
++				break;
++			}
++			user_service->dequeue_pending = 1;
++			do {
++				spin_unlock(&msg_queue_spinlock);
++				DEBUG_TRACE(DEQUEUE_MESSAGE_LINE);
++				if (down_interruptible(
++					&user_service->insert_event) != 0) {
++					vchiq_log_info(vchiq_arm_log_level,
++						"DEQUEUE_MESSAGE interrupted");
++					ret = -EINTR;
++					break;
++				}
++				spin_lock(&msg_queue_spinlock);
++			} while (user_service->msg_remove ==
++				user_service->msg_insert);
++
++			if (ret)
++				break;
++		}
++
++		BUG_ON((int)(user_service->msg_insert -
++			user_service->msg_remove) < 0);
++
++		header = user_service->msg_queue[user_service->msg_remove &
++			(MSG_QUEUE_SIZE - 1)];
++		user_service->msg_remove++;
++		spin_unlock(&msg_queue_spinlock);
++
++		up(&user_service->remove_event);
++		if (header == NULL)
++			ret = -ENOTCONN;
++		else if (header->size <= args.bufsize) {
++			/* Copy to user space if msgbuf is not NULL */
++			if ((args.buf == NULL) ||
++				(copy_to_user((void __user *)args.buf,
++				header->data,
++				header->size) == 0)) {
++				ret = header->size;
++				vchiq_release_message(
++					service->handle,
++					header);
++			} else
++				ret = -EFAULT;
++		} else {
++			vchiq_log_error(vchiq_arm_log_level,
++				"header %x: bufsize %x < size %x",
++				(unsigned int)header, args.bufsize,
++				header->size);
++			WARN(1, "invalid size\n");
++			ret = -EMSGSIZE;
++		}
++		DEBUG_TRACE(DEQUEUE_MESSAGE_LINE);
++	} break;
++
++	case VCHIQ_IOC_GET_CLIENT_ID: {
++		VCHIQ_SERVICE_HANDLE_T handle = (VCHIQ_SERVICE_HANDLE_T)arg;
++
++		ret = vchiq_get_client_id(handle);
++	} break;
++
++	case VCHIQ_IOC_GET_CONFIG: {
++		VCHIQ_GET_CONFIG_T args;
++		VCHIQ_CONFIG_T config;
++
++		if (copy_from_user(&args, (const void __user *)arg,
++			sizeof(args)) != 0) {
++			ret = -EFAULT;
++			break;
++		}
++		if (args.config_size > sizeof(config)) {
++			ret = -EINVAL;
++			break;
++		}
++		status = vchiq_get_config(instance, args.config_size, &config);
++		if (status == VCHIQ_SUCCESS) {
++			if (copy_to_user((void __user *)args.pconfig,
++				    &config, args.config_size) != 0) {
++				ret = -EFAULT;
++				break;
++			}
++		}
++	} break;
++
++	case VCHIQ_IOC_SET_SERVICE_OPTION: {
++		VCHIQ_SET_SERVICE_OPTION_T args;
++
++		if (copy_from_user(
++			&args, (const void __user *)arg,
++			sizeof(args)) != 0) {
++			ret = -EFAULT;
++			break;
++		}
++
++		service = find_service_for_instance(instance, args.handle);
++		if (!service) {
++			ret = -EINVAL;
++			break;
++		}
++
++		status = vchiq_set_service_option(
++				args.handle, args.option, args.value);
++	} break;
++
++	case VCHIQ_IOC_DUMP_PHYS_MEM: {
++		VCHIQ_DUMP_MEM_T  args;
++
++		if (copy_from_user
++			 (&args, (const void __user *)arg,
++			  sizeof(args)) != 0) {
++			ret = -EFAULT;
++			break;
++		}
++		dump_phys_mem(args.virt_addr, args.num_bytes);
++	} break;
++
++	default:
++		ret = -ENOTTY;
++		break;
++	}
++
++	if (service)
++		unlock_service(service);
++
++	if (ret == 0) {
++		if (status == VCHIQ_ERROR)
++			ret = -EIO;
++		else if (status == VCHIQ_RETRY)
++			ret = -EINTR;
++	}
++
++	if ((status == VCHIQ_SUCCESS) && (ret < 0) && (ret != -EINTR) &&
++		(ret != -EWOULDBLOCK))
++		vchiq_log_info(vchiq_arm_log_level,
++			"  ioctl instance %lx, cmd %s -> status %d, %ld",
++			(unsigned long)instance,
++			(_IOC_NR(cmd) <= VCHIQ_IOC_MAX) ?
++				ioctl_names[_IOC_NR(cmd)] :
++				"<invalid>",
++			status, ret);
++	else
++		vchiq_log_trace(vchiq_arm_log_level,
++			"  ioctl instance %lx, cmd %s -> status %d, %ld",
++			(unsigned long)instance,
++			(_IOC_NR(cmd) <= VCHIQ_IOC_MAX) ?
++				ioctl_names[_IOC_NR(cmd)] :
++				"<invalid>",
++			status, ret);
++
++	return ret;
++}
++
++/****************************************************************************
++*
++*   vchiq_open
++*
++***************************************************************************/
++
++static int
++vchiq_open(struct inode *inode, struct file *file)
++{
++	int dev = iminor(inode) & 0x0f;
++	vchiq_log_info(vchiq_arm_log_level, "vchiq_open");
++	switch (dev) {
++	case VCHIQ_MINOR: {
++		int ret;
++		VCHIQ_STATE_T *state = vchiq_get_state();
++		VCHIQ_INSTANCE_T instance;
++
++		if (!state) {
++			vchiq_log_error(vchiq_arm_log_level,
++				"vchiq has no connection to VideoCore");
++			return -ENOTCONN;
++		}
++
++		instance = kzalloc(sizeof(*instance), GFP_KERNEL);
++		if (!instance)
++			return -ENOMEM;
++
++		instance->state = state;
++		instance->pid = current->tgid;
++
++		ret = vchiq_proc_add_instance(instance);
++		if (ret != 0) {
++			kfree(instance);
++			return ret;
++		}
++
++		sema_init(&instance->insert_event, 0);
++		sema_init(&instance->remove_event, 0);
++		mutex_init(&instance->completion_mutex);
++		mutex_init(&instance->bulk_waiter_list_mutex);
++		INIT_LIST_HEAD(&instance->bulk_waiter_list);
++
++		file->private_data = instance;
++	} break;
++
++	default:
++		vchiq_log_error(vchiq_arm_log_level,
++			"Unknown minor device: %d", dev);
++		return -ENXIO;
++	}
++
++	return 0;
++}
++
++/****************************************************************************
++*
++*   vchiq_release
++*
++***************************************************************************/
++
++static int
++vchiq_release(struct inode *inode, struct file *file)
++{
++	int dev = iminor(inode) & 0x0f;
++	int ret = 0;
++	switch (dev) {
++	case VCHIQ_MINOR: {
++		VCHIQ_INSTANCE_T instance = file->private_data;
++		VCHIQ_STATE_T *state = vchiq_get_state();
++		VCHIQ_SERVICE_T *service;
++		int i;
++
++		vchiq_log_info(vchiq_arm_log_level,
++			"vchiq_release: instance=%lx",
++			(unsigned long)instance);
++
++		if (!state) {
++			ret = -EPERM;
++			goto out;
++		}
++
++		/* Ensure videocore is awake to allow termination. */
++		vchiq_use_internal(instance->state, NULL,
++				USE_TYPE_VCHIQ);
++
++		mutex_lock(&instance->completion_mutex);
++
++		/* Wake the completion thread and ask it to exit */
++		instance->closing = 1;
++		up(&instance->insert_event);
++
++		mutex_unlock(&instance->completion_mutex);
++
++		/* Wake the slot handler if the completion queue is full. */
++		up(&instance->remove_event);
++
++		/* Mark all services for termination... */
++		i = 0;
++		while ((service = next_service_by_instance(state, instance,
++			&i)) !=	NULL) {
++			USER_SERVICE_T *user_service = service->base.userdata;
++
++			/* Wake the slot handler if the msg queue is full. */
++			up(&user_service->remove_event);
++
++			vchiq_terminate_service_internal(service);
++			unlock_service(service);
++		}
++
++		/* ...and wait for them to die */
++		i = 0;
++		while ((service = next_service_by_instance(state, instance, &i))
++			!= NULL) {
++			USER_SERVICE_T *user_service = service->base.userdata;
++
++			down(&service->remove_event);
++
++			BUG_ON(service->srvstate != VCHIQ_SRVSTATE_FREE);
++
++			spin_lock(&msg_queue_spinlock);
++
++			while (user_service->msg_remove !=
++				user_service->msg_insert) {
++				VCHIQ_HEADER_T *header = user_service->
++					msg_queue[user_service->msg_remove &
++						(MSG_QUEUE_SIZE - 1)];
++				user_service->msg_remove++;
++				spin_unlock(&msg_queue_spinlock);
++
++				if (header)
++					vchiq_release_message(
++						service->handle,
++						header);
++				spin_lock(&msg_queue_spinlock);
++			}
++
++			spin_unlock(&msg_queue_spinlock);
++
++			unlock_service(service);
++		}
++
++		/* Release any closed services */
++		while (instance->completion_remove !=
++			instance->completion_insert) {
++			VCHIQ_COMPLETION_DATA_T *completion;
++			VCHIQ_SERVICE_T *service;
++			completion = &instance->completions[
++				instance->completion_remove &
++				(MAX_COMPLETIONS - 1)];
++			service = completion->service_userdata;
++			if (completion->reason == VCHIQ_SERVICE_CLOSED)
++				unlock_service(service);
++			instance->completion_remove++;
++		}
++
++		/* Release the PEER service count. */
++		vchiq_release_internal(instance->state, NULL);
++
++		{
++			struct list_head *pos, *next;
++			list_for_each_safe(pos, next,
++				&instance->bulk_waiter_list) {
++				struct bulk_waiter_node *waiter;
++				waiter = list_entry(pos,
++					struct bulk_waiter_node,
++					list);
++				list_del(pos);
++				vchiq_log_info(vchiq_arm_log_level,
++					"bulk_waiter - cleaned up %x "
++					"for pid %d",
++					(unsigned int)waiter, waiter->pid);
++				kfree(waiter);
++			}
++		}
++
++		vchiq_proc_remove_instance(instance);
++
++		kfree(instance);
++		file->private_data = NULL;
++	} break;
++
++	default:
++		vchiq_log_error(vchiq_arm_log_level,
++			"Unknown minor device: %d", dev);
++		ret = -ENXIO;
++	}
++
++out:
++	return ret;
++}
++
++/****************************************************************************
++*
++*   vchiq_dump
++*
++***************************************************************************/
++
++void
++vchiq_dump(void *dump_context, const char *str, int len)
++{
++	DUMP_CONTEXT_T *context = (DUMP_CONTEXT_T *)dump_context;
++
++	if (context->actual < context->space) {
++		int copy_bytes;
++		if (context->offset > 0) {
++			int skip_bytes = min(len, (int)context->offset);
++			str += skip_bytes;
++			len -= skip_bytes;
++			context->offset -= skip_bytes;
++			if (context->offset > 0)
++				return;
++		}
++		copy_bytes = min(len, (int)(context->space - context->actual));
++		if (copy_bytes == 0)
++			return;
++		if (copy_to_user(context->buf + context->actual, str,
++			copy_bytes))
++			context->actual = -EFAULT;
++		context->actual += copy_bytes;
++		len -= copy_bytes;
++
++		/* If tne terminating NUL is included in the length, then it
++		** marks the end of a line and should be replaced with a
++		** carriage return. */
++		if ((len == 0) && (str[copy_bytes - 1] == '\0')) {
++			char cr = '\n';
++			if (copy_to_user(context->buf + context->actual - 1,
++				&cr, 1))
++				context->actual = -EFAULT;
++		}
++	}
++}
++
++/****************************************************************************
++*
++*   vchiq_dump_platform_instance_state
++*
++***************************************************************************/
++
++void
++vchiq_dump_platform_instances(void *dump_context)
++{
++	VCHIQ_STATE_T *state = vchiq_get_state();
++	char buf[80];
++	int len;
++	int i;
++
++	/* There is no list of instances, so instead scan all services,
++		marking those that have been dumped. */
++
++	for (i = 0; i < state->unused_service; i++) {
++		VCHIQ_SERVICE_T *service = state->services[i];
++		VCHIQ_INSTANCE_T instance;
++
++		if (service && (service->base.callback == service_callback)) {
++			instance = service->instance;
++			if (instance)
++				instance->mark = 0;
++		}
++	}
++
++	for (i = 0; i < state->unused_service; i++) {
++		VCHIQ_SERVICE_T *service = state->services[i];
++		VCHIQ_INSTANCE_T instance;
++
++		if (service && (service->base.callback == service_callback)) {
++			instance = service->instance;
++			if (instance && !instance->mark) {
++				len = snprintf(buf, sizeof(buf),
++					"Instance %x: pid %d,%s completions "
++						"%d/%d",
++					(unsigned int)instance, instance->pid,
++					instance->connected ? " connected, " :
++						"",
++					instance->completion_insert -
++						instance->completion_remove,
++					MAX_COMPLETIONS);
++
++				vchiq_dump(dump_context, buf, len + 1);
++
++				instance->mark = 1;
++			}
++		}
++	}
++}
++
++/****************************************************************************
++*
++*   vchiq_dump_platform_service_state
++*
++***************************************************************************/
++
++void
++vchiq_dump_platform_service_state(void *dump_context, VCHIQ_SERVICE_T *service)
++{
++	USER_SERVICE_T *user_service = (USER_SERVICE_T *)service->base.userdata;
++	char buf[80];
++	int len;
++
++	len = snprintf(buf, sizeof(buf), "  instance %x",
++		(unsigned int)service->instance);
++
++	if ((service->base.callback == service_callback) &&
++		user_service->is_vchi) {
++		len += snprintf(buf + len, sizeof(buf) - len,
++			", %d/%d messages",
++			user_service->msg_insert - user_service->msg_remove,
++			MSG_QUEUE_SIZE);
++
++		if (user_service->dequeue_pending)
++			len += snprintf(buf + len, sizeof(buf) - len,
++				" (dequeue pending)");
++	}
++
++	vchiq_dump(dump_context, buf, len + 1);
++}
++
++/****************************************************************************
++*
++*   dump_user_mem
++*
++***************************************************************************/
++
++static void
++dump_phys_mem(void *virt_addr, uint32_t num_bytes)
++{
++	int            rc;
++	uint8_t       *end_virt_addr = virt_addr + num_bytes;
++	int            num_pages;
++	int            offset;
++	int            end_offset;
++	int            page_idx;
++	int            prev_idx;
++	struct page   *page;
++	struct page  **pages;
++	uint8_t       *kmapped_virt_ptr;
++
++	/* Align virtAddr and endVirtAddr to 16 byte boundaries. */
++
++	virt_addr = (void *)((unsigned long)virt_addr & ~0x0fuL);
++	end_virt_addr = (void *)(((unsigned long)end_virt_addr + 15uL) &
++		~0x0fuL);
++
++	offset = (int)(long)virt_addr & (PAGE_SIZE - 1);
++	end_offset = (int)(long)end_virt_addr & (PAGE_SIZE - 1);
++
++	num_pages = (offset + num_bytes + PAGE_SIZE - 1) / PAGE_SIZE;
++
++	pages = kmalloc(sizeof(struct page *) * num_pages, GFP_KERNEL);
++	if (pages == NULL) {
++		vchiq_log_error(vchiq_arm_log_level,
++			"Unable to allocation memory for %d pages\n",
++			num_pages);
++		return;
++	}
++
++	down_read(&current->mm->mmap_sem);
++	rc = get_user_pages(current,      /* task */
++		current->mm,              /* mm */
++		(unsigned long)virt_addr, /* start */
++		num_pages,                /* len */
++		0,                        /* write */
++		0,                        /* force */
++		pages,                    /* pages (array of page pointers) */
++		NULL);                    /* vmas */
++	up_read(&current->mm->mmap_sem);
++
++	prev_idx = -1;
++	page = NULL;
++
++	while (offset < end_offset) {
++
++		int page_offset = offset % PAGE_SIZE;
++		page_idx = offset / PAGE_SIZE;
++
++		if (page_idx != prev_idx) {
++
++			if (page != NULL)
++				kunmap(page);
++			page = pages[page_idx];
++			kmapped_virt_ptr = kmap(page);
++
++			prev_idx = page_idx;
++		}
++
++		if (vchiq_arm_log_level >= VCHIQ_LOG_TRACE)
++			vchiq_log_dump_mem("ph",
++				(uint32_t)(unsigned long)&kmapped_virt_ptr[
++					page_offset],
++				&kmapped_virt_ptr[page_offset], 16);
++
++		offset += 16;
++	}
++	if (page != NULL)
++		kunmap(page);
++
++	for (page_idx = 0; page_idx < num_pages; page_idx++)
++		page_cache_release(pages[page_idx]);
++
++	kfree(pages);
++}
++
++/****************************************************************************
++*
++*   vchiq_read
++*
++***************************************************************************/
++
++static ssize_t
++vchiq_read(struct file *file, char __user *buf,
++	size_t count, loff_t *ppos)
++{
++	DUMP_CONTEXT_T context;
++	context.buf = buf;
++	context.actual = 0;
++	context.space = count;
++	context.offset = *ppos;
++
++	vchiq_dump_state(&context, &g_state);
++
++	*ppos += context.actual;
++
++	return context.actual;
++}
++
++VCHIQ_STATE_T *
++vchiq_get_state(void)
++{
++
++	if (g_state.remote == NULL)
++		printk(KERN_ERR "%s: g_state.remote == NULL\n", __func__);
++	else if (g_state.remote->initialised != 1)
++		printk(KERN_NOTICE "%s: g_state.remote->initialised != 1 (%d)\n",
++			__func__, g_state.remote->initialised);
++
++	return ((g_state.remote != NULL) &&
++		(g_state.remote->initialised == 1)) ? &g_state : NULL;
++}
++
++static const struct file_operations
++vchiq_fops = {
++	.owner = THIS_MODULE,
++	.unlocked_ioctl = vchiq_ioctl,
++	.open = vchiq_open,
++	.release = vchiq_release,
++	.read = vchiq_read
++};
++
++/*
++ * Autosuspend related functionality
++ */
++
++int
++vchiq_videocore_wanted(VCHIQ_STATE_T *state)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	if (!arm_state)
++		/* autosuspend not supported - always return wanted */
++		return 1;
++	else if (arm_state->blocked_count)
++		return 1;
++	else if (!arm_state->videocore_use_count)
++		/* usage count zero - check for override unless we're forcing */
++		if (arm_state->resume_blocked)
++			return 0;
++		else
++			return vchiq_platform_videocore_wanted(state);
++	else
++		/* non-zero usage count - videocore still required */
++		return 1;
++}
++
++static VCHIQ_STATUS_T
++vchiq_keepalive_vchiq_callback(VCHIQ_REASON_T reason,
++	VCHIQ_HEADER_T *header,
++	VCHIQ_SERVICE_HANDLE_T service_user,
++	void *bulk_user)
++{
++	vchiq_log_error(vchiq_susp_log_level,
++		"%s callback reason %d", __func__, reason);
++	return 0;
++}
++
++static int
++vchiq_keepalive_thread_func(void *v)
++{
++	VCHIQ_STATE_T *state = (VCHIQ_STATE_T *) v;
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++
++	VCHIQ_STATUS_T status;
++	VCHIQ_INSTANCE_T instance;
++	VCHIQ_SERVICE_HANDLE_T ka_handle;
++
++	VCHIQ_SERVICE_PARAMS_T params = {
++		.fourcc      = VCHIQ_MAKE_FOURCC('K', 'E', 'E', 'P'),
++		.callback    = vchiq_keepalive_vchiq_callback,
++		.version     = KEEPALIVE_VER,
++		.version_min = KEEPALIVE_VER_MIN
++	};
++
++	status = vchiq_initialise(&instance);
++	if (status != VCHIQ_SUCCESS) {
++		vchiq_log_error(vchiq_susp_log_level,
++			"%s vchiq_initialise failed %d", __func__, status);
++		goto exit;
++	}
++
++	status = vchiq_connect(instance);
++	if (status != VCHIQ_SUCCESS) {
++		vchiq_log_error(vchiq_susp_log_level,
++			"%s vchiq_connect failed %d", __func__, status);
++		goto shutdown;
++	}
++
++	status = vchiq_add_service(instance, &params, &ka_handle);
++	if (status != VCHIQ_SUCCESS) {
++		vchiq_log_error(vchiq_susp_log_level,
++			"%s vchiq_open_service failed %d", __func__, status);
++		goto shutdown;
++	}
++
++	while (1) {
++		long rc = 0, uc = 0;
++		if (wait_for_completion_interruptible(&arm_state->ka_evt)
++				!= 0) {
++			vchiq_log_error(vchiq_susp_log_level,
++				"%s interrupted", __func__);
++			flush_signals(current);
++			continue;
++		}
++
++		/* read and clear counters.  Do release_count then use_count to
++		 * prevent getting more releases than uses */
++		rc = atomic_xchg(&arm_state->ka_release_count, 0);
++		uc = atomic_xchg(&arm_state->ka_use_count, 0);
++
++		/* Call use/release service the requisite number of times.
++		 * Process use before release so use counts don't go negative */
++		while (uc--) {
++			atomic_inc(&arm_state->ka_use_ack_count);
++			status = vchiq_use_service(ka_handle);
++			if (status != VCHIQ_SUCCESS) {
++				vchiq_log_error(vchiq_susp_log_level,
++					"%s vchiq_use_service error %d",
++					__func__, status);
++			}
++		}
++		while (rc--) {
++			status = vchiq_release_service(ka_handle);
++			if (status != VCHIQ_SUCCESS) {
++				vchiq_log_error(vchiq_susp_log_level,
++					"%s vchiq_release_service error %d",
++					__func__, status);
++			}
++		}
++	}
++
++shutdown:
++	vchiq_shutdown(instance);
++exit:
++	return 0;
++}
++
++
++
++VCHIQ_STATUS_T
++vchiq_arm_init_state(VCHIQ_STATE_T *state, VCHIQ_ARM_STATE_T *arm_state)
++{
++	VCHIQ_STATUS_T status = VCHIQ_SUCCESS;
++
++	if (arm_state) {
++		rwlock_init(&arm_state->susp_res_lock);
++
++		init_completion(&arm_state->ka_evt);
++		atomic_set(&arm_state->ka_use_count, 0);
++		atomic_set(&arm_state->ka_use_ack_count, 0);
++		atomic_set(&arm_state->ka_release_count, 0);
++
++		init_completion(&arm_state->vc_suspend_complete);
++
++		init_completion(&arm_state->vc_resume_complete);
++		/* Initialise to 'done' state.  We only want to block on resume
++		 * completion while videocore is suspended. */
++		set_resume_state(arm_state, VC_RESUME_RESUMED);
++
++		init_completion(&arm_state->resume_blocker);
++		/* Initialise to 'done' state.  We only want to block on this
++		 * completion while resume is blocked */
++		complete_all(&arm_state->resume_blocker);
++
++		init_completion(&arm_state->blocked_blocker);
++		/* Initialise to 'done' state.  We only want to block on this
++		 * completion while things are waiting on the resume blocker */
++		complete_all(&arm_state->blocked_blocker);
++
++		arm_state->suspend_timer_timeout = SUSPEND_TIMER_TIMEOUT_MS;
++		arm_state->suspend_timer_running = 0;
++		init_timer(&arm_state->suspend_timer);
++		arm_state->suspend_timer.data = (unsigned long)(state);
++		arm_state->suspend_timer.function = suspend_timer_callback;
++
++		arm_state->first_connect = 0;
++
++	}
++	return status;
++}
++
++/*
++** Functions to modify the state variables;
++**	set_suspend_state
++**	set_resume_state
++**
++** There are more state variables than we might like, so ensure they remain in
++** step.  Suspend and resume state are maintained separately, since most of
++** these state machines can operate independently.  However, there are a few
++** states where state transitions in one state machine cause a reset to the
++** other state machine.  In addition, there are some completion events which
++** need to occur on state machine reset and end-state(s), so these are also
++** dealt with in these functions.
++**
++** In all states we set the state variable according to the input, but in some
++** cases we perform additional steps outlined below;
++**
++** VC_SUSPEND_IDLE - Initialise the suspend completion at the same time.
++**			The suspend completion is completed after any suspend
++**			attempt.  When we reset the state machine we also reset
++**			the completion.  This reset occurs when videocore is
++**			resumed, and also if we initiate suspend after a suspend
++**			failure.
++**
++** VC_SUSPEND_IN_PROGRESS - This state is considered the point of no return for
++**			suspend - ie from this point on we must try to suspend
++**			before resuming can occur.  We therefore also reset the
++**			resume state machine to VC_RESUME_IDLE in this state.
++**
++** VC_SUSPEND_SUSPENDED - Suspend has completed successfully. Also call
++**			complete_all on the suspend completion to notify
++**			anything waiting for suspend to happen.
++**
++** VC_SUSPEND_REJECTED - Videocore rejected suspend. Videocore will also
++**			initiate resume, so no need to alter resume state.
++**			We call complete_all on the suspend completion to notify
++**			of suspend rejection.
++**
++** VC_SUSPEND_FAILED - We failed to initiate videocore suspend.  We notify the
++**			suspend completion and reset the resume state machine.
++**
++** VC_RESUME_IDLE - Initialise the resume completion at the same time.  The
++**			resume completion is in it's 'done' state whenever
++**			videcore is running.  Therfore, the VC_RESUME_IDLE state
++**			implies that videocore is suspended.
++**			Hence, any thread which needs to wait until videocore is
++**			running can wait on this completion - it will only block
++**			if videocore is suspended.
++**
++** VC_RESUME_RESUMED - Resume has completed successfully.  Videocore is running.
++**			Call complete_all on the resume completion to unblock
++**			any threads waiting for resume.	 Also reset the suspend
++**			state machine to it's idle state.
++**
++** VC_RESUME_FAILED - Currently unused - no mechanism to fail resume exists.
++*/
++
++inline void
++set_suspend_state(VCHIQ_ARM_STATE_T *arm_state,
++	enum vc_suspend_status new_state)
++{
++	/* set the state in all cases */
++	arm_state->vc_suspend_state = new_state;
++
++	/* state specific additional actions */
++	switch (new_state) {
++	case VC_SUSPEND_FORCE_CANCELED:
++		complete_all(&arm_state->vc_suspend_complete);
++		break;
++	case VC_SUSPEND_REJECTED:
++		complete_all(&arm_state->vc_suspend_complete);
++		break;
++	case VC_SUSPEND_FAILED:
++		complete_all(&arm_state->vc_suspend_complete);
++		arm_state->vc_resume_state = VC_RESUME_RESUMED;
++		complete_all(&arm_state->vc_resume_complete);
++		break;
++	case VC_SUSPEND_IDLE:
++		INIT_COMPLETION(arm_state->vc_suspend_complete);
++		break;
++	case VC_SUSPEND_REQUESTED:
++		break;
++	case VC_SUSPEND_IN_PROGRESS:
++		set_resume_state(arm_state, VC_RESUME_IDLE);
++		break;
++	case VC_SUSPEND_SUSPENDED:
++		complete_all(&arm_state->vc_suspend_complete);
++		break;
++	default:
++		BUG();
++		break;
++	}
++}
++
++inline void
++set_resume_state(VCHIQ_ARM_STATE_T *arm_state,
++	enum vc_resume_status new_state)
++{
++	/* set the state in all cases */
++	arm_state->vc_resume_state = new_state;
++
++	/* state specific additional actions */
++	switch (new_state) {
++	case VC_RESUME_FAILED:
++		break;
++	case VC_RESUME_IDLE:
++		INIT_COMPLETION(arm_state->vc_resume_complete);
++		break;
++	case VC_RESUME_REQUESTED:
++		break;
++	case VC_RESUME_IN_PROGRESS:
++		break;
++	case VC_RESUME_RESUMED:
++		complete_all(&arm_state->vc_resume_complete);
++		set_suspend_state(arm_state, VC_SUSPEND_IDLE);
++		break;
++	default:
++		BUG();
++		break;
++	}
++}
++
++
++/* should be called with the write lock held */
++inline void
++start_suspend_timer(VCHIQ_ARM_STATE_T *arm_state)
++{
++	del_timer(&arm_state->suspend_timer);
++	arm_state->suspend_timer.expires = jiffies +
++		msecs_to_jiffies(arm_state->
++			suspend_timer_timeout);
++	add_timer(&arm_state->suspend_timer);
++	arm_state->suspend_timer_running = 1;
++}
++
++/* should be called with the write lock held */
++static inline void
++stop_suspend_timer(VCHIQ_ARM_STATE_T *arm_state)
++{
++	if (arm_state->suspend_timer_running) {
++		del_timer(&arm_state->suspend_timer);
++		arm_state->suspend_timer_running = 0;
++	}
++}
++
++static inline int
++need_resume(VCHIQ_STATE_T *state)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	return (arm_state->vc_suspend_state > VC_SUSPEND_IDLE) &&
++			(arm_state->vc_resume_state < VC_RESUME_REQUESTED) &&
++			vchiq_videocore_wanted(state);
++}
++
++static int
++block_resume(VCHIQ_ARM_STATE_T *arm_state)
++{
++	int status = VCHIQ_SUCCESS;
++	const unsigned long timeout_val =
++				msecs_to_jiffies(FORCE_SUSPEND_TIMEOUT_MS);
++	int resume_count = 0;
++
++	/* Allow any threads which were blocked by the last force suspend to
++	 * complete if they haven't already.  Only give this one shot; if
++	 * blocked_count is incremented after blocked_blocker is completed
++	 * (which only happens when blocked_count hits 0) then those threads
++	 * will have to wait until next time around */
++	if (arm_state->blocked_count) {
++		INIT_COMPLETION(arm_state->blocked_blocker);
++		write_unlock_bh(&arm_state->susp_res_lock);
++		vchiq_log_info(vchiq_susp_log_level, "%s wait for previously "
++			"blocked clients", __func__);
++		if (wait_for_completion_interruptible_timeout(
++				&arm_state->blocked_blocker, timeout_val)
++					<= 0) {
++			vchiq_log_error(vchiq_susp_log_level, "%s wait for "
++				"previously blocked clients failed" , __func__);
++			status = VCHIQ_ERROR;
++			write_lock_bh(&arm_state->susp_res_lock);
++			goto out;
++		}
++		vchiq_log_info(vchiq_susp_log_level, "%s previously blocked "
++			"clients resumed", __func__);
++		write_lock_bh(&arm_state->susp_res_lock);
++	}
++
++	/* We need to wait for resume to complete if it's in process */
++	while (arm_state->vc_resume_state != VC_RESUME_RESUMED &&
++			arm_state->vc_resume_state > VC_RESUME_IDLE) {
++		if (resume_count > 1) {
++			status = VCHIQ_ERROR;
++			vchiq_log_error(vchiq_susp_log_level, "%s waited too "
++				"many times for resume" , __func__);
++			goto out;
++		}
++		write_unlock_bh(&arm_state->susp_res_lock);
++		vchiq_log_info(vchiq_susp_log_level, "%s wait for resume",
++			__func__);
++		if (wait_for_completion_interruptible_timeout(
++				&arm_state->vc_resume_complete, timeout_val)
++					<= 0) {
++			vchiq_log_error(vchiq_susp_log_level, "%s wait for "
++				"resume failed (%s)", __func__,
++				resume_state_names[arm_state->vc_resume_state +
++							VC_RESUME_NUM_OFFSET]);
++			status = VCHIQ_ERROR;
++			write_lock_bh(&arm_state->susp_res_lock);
++			goto out;
++		}
++		vchiq_log_info(vchiq_susp_log_level, "%s resumed", __func__);
++		write_lock_bh(&arm_state->susp_res_lock);
++		resume_count++;
++	}
++	INIT_COMPLETION(arm_state->resume_blocker);
++	arm_state->resume_blocked = 1;
++
++out:
++	return status;
++}
++
++static inline void
++unblock_resume(VCHIQ_ARM_STATE_T *arm_state)
++{
++	complete_all(&arm_state->resume_blocker);
++	arm_state->resume_blocked = 0;
++}
++
++/* Initiate suspend via slot handler. Should be called with the write lock
++ * held */
++VCHIQ_STATUS_T
++vchiq_arm_vcsuspend(VCHIQ_STATE_T *state)
++{
++	VCHIQ_STATUS_T status = VCHIQ_ERROR;
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++
++	if (!arm_state)
++		goto out;
++
++	vchiq_log_trace(vchiq_susp_log_level, "%s", __func__);
++	status = VCHIQ_SUCCESS;
++
++
++	switch (arm_state->vc_suspend_state) {
++	case VC_SUSPEND_REQUESTED:
++		vchiq_log_info(vchiq_susp_log_level, "%s: suspend already "
++			"requested", __func__);
++		break;
++	case VC_SUSPEND_IN_PROGRESS:
++		vchiq_log_info(vchiq_susp_log_level, "%s: suspend already in "
++			"progress", __func__);
++		break;
++
++	default:
++		/* We don't expect to be in other states, so log but continue
++		 * anyway */
++		vchiq_log_error(vchiq_susp_log_level,
++			"%s unexpected suspend state %s", __func__,
++			suspend_state_names[arm_state->vc_suspend_state +
++						VC_SUSPEND_NUM_OFFSET]);
++		/* fall through */
++	case VC_SUSPEND_REJECTED:
++	case VC_SUSPEND_FAILED:
++		/* Ensure any idle state actions have been run */
++		set_suspend_state(arm_state, VC_SUSPEND_IDLE);
++		/* fall through */
++	case VC_SUSPEND_IDLE:
++		vchiq_log_info(vchiq_susp_log_level,
++			"%s: suspending", __func__);
++		set_suspend_state(arm_state, VC_SUSPEND_REQUESTED);
++		/* kick the slot handler thread to initiate suspend */
++		request_poll(state, NULL, 0);
++		break;
++	}
++
++out:
++	vchiq_log_trace(vchiq_susp_log_level, "%s exit %d", __func__, status);
++	return status;
++}
++
++void
++vchiq_platform_check_suspend(VCHIQ_STATE_T *state)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	int susp = 0;
++
++	if (!arm_state)
++		goto out;
++
++	vchiq_log_trace(vchiq_susp_log_level, "%s", __func__);
++
++	write_lock_bh(&arm_state->susp_res_lock);
++	if (arm_state->vc_suspend_state == VC_SUSPEND_REQUESTED &&
++			arm_state->vc_resume_state == VC_RESUME_RESUMED) {
++		set_suspend_state(arm_state, VC_SUSPEND_IN_PROGRESS);
++		susp = 1;
++	}
++	write_unlock_bh(&arm_state->susp_res_lock);
++
++	if (susp)
++		vchiq_platform_suspend(state);
++
++out:
++	vchiq_log_trace(vchiq_susp_log_level, "%s exit", __func__);
++	return;
++}
++
++
++static void
++output_timeout_error(VCHIQ_STATE_T *state)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	char service_err[50] = "";
++	int vc_use_count = arm_state->videocore_use_count;
++	int active_services = state->unused_service;
++	int i;
++
++	if (!arm_state->videocore_use_count) {
++		snprintf(service_err, 50, " Videocore usecount is 0");
++		goto output_msg;
++	}
++	for (i = 0; i < active_services; i++) {
++		VCHIQ_SERVICE_T *service_ptr = state->services[i];
++		if (service_ptr && service_ptr->service_use_count &&
++			(service_ptr->srvstate != VCHIQ_SRVSTATE_FREE)) {
++			snprintf(service_err, 50, " %c%c%c%c(%d) service has "
++				"use count %d%s", VCHIQ_FOURCC_AS_4CHARS(
++					service_ptr->base.fourcc),
++				 service_ptr->client_id,
++				 service_ptr->service_use_count,
++				 service_ptr->service_use_count ==
++					 vc_use_count ? "" : " (+ more)");
++			break;
++		}
++	}
++
++output_msg:
++	vchiq_log_error(vchiq_susp_log_level,
++		"timed out waiting for vc suspend (%d).%s",
++		 arm_state->autosuspend_override, service_err);
++
++}
++
++/* Try to get videocore into suspended state, regardless of autosuspend state.
++** We don't actually force suspend, since videocore may get into a bad state
++** if we force suspend at a bad time.  Instead, we wait for autosuspend to
++** determine a good point to suspend.  If this doesn't happen within 100ms we
++** report failure.
++**
++** Returns VCHIQ_SUCCESS if videocore suspended successfully, VCHIQ_RETRY if
++** videocore failed to suspend in time or VCHIQ_ERROR if interrupted.
++*/
++VCHIQ_STATUS_T
++vchiq_arm_force_suspend(VCHIQ_STATE_T *state)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	VCHIQ_STATUS_T status = VCHIQ_ERROR;
++	long rc = 0;
++	int repeat = -1;
++
++	if (!arm_state)
++		goto out;
++
++	vchiq_log_trace(vchiq_susp_log_level, "%s", __func__);
++
++	write_lock_bh(&arm_state->susp_res_lock);
++
++	status = block_resume(arm_state);
++	if (status != VCHIQ_SUCCESS)
++		goto unlock;
++	if (arm_state->vc_suspend_state == VC_SUSPEND_SUSPENDED) {
++		/* Already suspended - just block resume and exit */
++		vchiq_log_info(vchiq_susp_log_level, "%s already suspended",
++			__func__);
++		status = VCHIQ_SUCCESS;
++		goto unlock;
++	} else if (arm_state->vc_suspend_state <= VC_SUSPEND_IDLE) {
++		/* initiate suspend immediately in the case that we're waiting
++		 * for the timeout */
++		stop_suspend_timer(arm_state);
++		if (!vchiq_videocore_wanted(state)) {
++			vchiq_log_info(vchiq_susp_log_level, "%s videocore "
++				"idle, initiating suspend", __func__);
++			status = vchiq_arm_vcsuspend(state);
++		} else if (arm_state->autosuspend_override <
++						FORCE_SUSPEND_FAIL_MAX) {
++			vchiq_log_info(vchiq_susp_log_level, "%s letting "
++				"videocore go idle", __func__);
++			status = VCHIQ_SUCCESS;
++		} else {
++			vchiq_log_warning(vchiq_susp_log_level, "%s failed too "
++				"many times - attempting suspend", __func__);
++			status = vchiq_arm_vcsuspend(state);
++		}
++	} else {
++		vchiq_log_info(vchiq_susp_log_level, "%s videocore suspend "
++			"in progress - wait for completion", __func__);
++		status = VCHIQ_SUCCESS;
++	}
++
++	/* Wait for suspend to happen due to system idle (not forced..) */
++	if (status != VCHIQ_SUCCESS)
++		goto unblock_resume;
++
++	do {
++		write_unlock_bh(&arm_state->susp_res_lock);
++
++		rc = wait_for_completion_interruptible_timeout(
++				&arm_state->vc_suspend_complete,
++				msecs_to_jiffies(FORCE_SUSPEND_TIMEOUT_MS));
++
++		write_lock_bh(&arm_state->susp_res_lock);
++		if (rc < 0) {
++			vchiq_log_warning(vchiq_susp_log_level, "%s "
++				"interrupted waiting for suspend", __func__);
++			status = VCHIQ_ERROR;
++			goto unblock_resume;
++		} else if (rc == 0) {
++			if (arm_state->vc_suspend_state > VC_SUSPEND_IDLE) {
++				/* Repeat timeout once if in progress */
++				if (repeat < 0) {
++					repeat = 1;
++					continue;
++				}
++			}
++			arm_state->autosuspend_override++;
++			output_timeout_error(state);
++
++			status = VCHIQ_RETRY;
++			goto unblock_resume;
++		}
++	} while (0 < (repeat--));
++
++	/* Check and report state in case we need to abort ARM suspend */
++	if (arm_state->vc_suspend_state != VC_SUSPEND_SUSPENDED) {
++		status = VCHIQ_RETRY;
++		vchiq_log_error(vchiq_susp_log_level,
++			"%s videocore suspend failed (state %s)", __func__,
++			suspend_state_names[arm_state->vc_suspend_state +
++						VC_SUSPEND_NUM_OFFSET]);
++		/* Reset the state only if it's still in an error state.
++		 * Something could have already initiated another suspend. */
++		if (arm_state->vc_suspend_state < VC_SUSPEND_IDLE)
++			set_suspend_state(arm_state, VC_SUSPEND_IDLE);
++
++		goto unblock_resume;
++	}
++
++	/* successfully suspended - unlock and exit */
++	goto unlock;
++
++unblock_resume:
++	/* all error states need to unblock resume before exit */
++	unblock_resume(arm_state);
++
++unlock:
++	write_unlock_bh(&arm_state->susp_res_lock);
++
++out:
++	vchiq_log_trace(vchiq_susp_log_level, "%s exit %d", __func__, status);
++	return status;
++}
++
++void
++vchiq_check_suspend(VCHIQ_STATE_T *state)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++
++	if (!arm_state)
++		goto out;
++
++	vchiq_log_trace(vchiq_susp_log_level, "%s", __func__);
++
++	write_lock_bh(&arm_state->susp_res_lock);
++	if (arm_state->vc_suspend_state != VC_SUSPEND_SUSPENDED &&
++			arm_state->first_connect &&
++			!vchiq_videocore_wanted(state)) {
++		vchiq_arm_vcsuspend(state);
++	}
++	write_unlock_bh(&arm_state->susp_res_lock);
++
++out:
++	vchiq_log_trace(vchiq_susp_log_level, "%s exit", __func__);
++	return;
++}
++
++
++int
++vchiq_arm_allow_resume(VCHIQ_STATE_T *state)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	int resume = 0;
++	int ret = -1;
++
++	if (!arm_state)
++		goto out;
++
++	vchiq_log_trace(vchiq_susp_log_level, "%s", __func__);
++
++	write_lock_bh(&arm_state->susp_res_lock);
++	unblock_resume(arm_state);
++	resume = vchiq_check_resume(state);
++	write_unlock_bh(&arm_state->susp_res_lock);
++
++	if (resume) {
++		if (wait_for_completion_interruptible(
++			&arm_state->vc_resume_complete) < 0) {
++			vchiq_log_error(vchiq_susp_log_level,
++				"%s interrupted", __func__);
++			/* failed, cannot accurately derive suspend
++			 * state, so exit early. */
++			goto out;
++		}
++	}
++
++	read_lock_bh(&arm_state->susp_res_lock);
++	if (arm_state->vc_suspend_state == VC_SUSPEND_SUSPENDED) {
++		vchiq_log_info(vchiq_susp_log_level,
++				"%s: Videocore remains suspended", __func__);
++	} else {
++		vchiq_log_info(vchiq_susp_log_level,
++				"%s: Videocore resumed", __func__);
++		ret = 0;
++	}
++	read_unlock_bh(&arm_state->susp_res_lock);
++out:
++	vchiq_log_trace(vchiq_susp_log_level, "%s exit %d", __func__, ret);
++	return ret;
++}
++
++/* This function should be called with the write lock held */
++int
++vchiq_check_resume(VCHIQ_STATE_T *state)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	int resume = 0;
++
++	if (!arm_state)
++		goto out;
++
++	vchiq_log_trace(vchiq_susp_log_level, "%s", __func__);
++
++	if (need_resume(state)) {
++		set_resume_state(arm_state, VC_RESUME_REQUESTED);
++		request_poll(state, NULL, 0);
++		resume = 1;
++	}
++
++out:
++	vchiq_log_trace(vchiq_susp_log_level, "%s exit", __func__);
++	return resume;
++}
++
++void
++vchiq_platform_check_resume(VCHIQ_STATE_T *state)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	int res = 0;
++
++	if (!arm_state)
++		goto out;
++
++	vchiq_log_trace(vchiq_susp_log_level, "%s", __func__);
++
++	write_lock_bh(&arm_state->susp_res_lock);
++	if (arm_state->wake_address == 0) {
++		vchiq_log_info(vchiq_susp_log_level,
++					"%s: already awake", __func__);
++		goto unlock;
++	}
++	if (arm_state->vc_resume_state == VC_RESUME_IN_PROGRESS) {
++		vchiq_log_info(vchiq_susp_log_level,
++					"%s: already resuming", __func__);
++		goto unlock;
++	}
++
++	if (arm_state->vc_resume_state == VC_RESUME_REQUESTED) {
++		set_resume_state(arm_state, VC_RESUME_IN_PROGRESS);
++		res = 1;
++	} else
++		vchiq_log_trace(vchiq_susp_log_level,
++				"%s: not resuming (resume state %s)", __func__,
++				resume_state_names[arm_state->vc_resume_state +
++							VC_RESUME_NUM_OFFSET]);
++
++unlock:
++	write_unlock_bh(&arm_state->susp_res_lock);
++
++	if (res)
++		vchiq_platform_resume(state);
++
++out:
++	vchiq_log_trace(vchiq_susp_log_level, "%s exit", __func__);
++	return;
++
++}
++
++
++
++VCHIQ_STATUS_T
++vchiq_use_internal(VCHIQ_STATE_T *state, VCHIQ_SERVICE_T *service,
++		enum USE_TYPE_E use_type)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	VCHIQ_STATUS_T ret = VCHIQ_SUCCESS;
++	char entity[16];
++	int *entity_uc;
++	int local_uc, local_entity_uc;
++
++	if (!arm_state)
++		goto out;
++
++	vchiq_log_trace(vchiq_susp_log_level, "%s", __func__);
++
++	if (use_type == USE_TYPE_VCHIQ) {
++		sprintf(entity, "VCHIQ:   ");
++		entity_uc = &arm_state->peer_use_count;
++	} else if (service) {
++		sprintf(entity, "%c%c%c%c:%03d",
++			VCHIQ_FOURCC_AS_4CHARS(service->base.fourcc),
++			service->client_id);
++		entity_uc = &service->service_use_count;
++	} else {
++		vchiq_log_error(vchiq_susp_log_level, "%s null service "
++				"ptr", __func__);
++		ret = VCHIQ_ERROR;
++		goto out;
++	}
++
++	write_lock_bh(&arm_state->susp_res_lock);
++	while (arm_state->resume_blocked) {
++		/* If we call 'use' while force suspend is waiting for suspend,
++		 * then we're about to block the thread which the force is
++		 * waiting to complete, so we're bound to just time out. In this
++		 * case, set the suspend state such that the wait will be
++		 * canceled, so we can complete as quickly as possible. */
++		if (arm_state->resume_blocked && arm_state->vc_suspend_state ==
++				VC_SUSPEND_IDLE) {
++			set_suspend_state(arm_state, VC_SUSPEND_FORCE_CANCELED);
++			break;
++		}
++		/* If suspend is already in progress then we need to block */
++		if (!try_wait_for_completion(&arm_state->resume_blocker)) {
++			/* Indicate that there are threads waiting on the resume
++			 * blocker.  These need to be allowed to complete before
++			 * a _second_ call to force suspend can complete,
++			 * otherwise low priority threads might never actually
++			 * continue */
++			arm_state->blocked_count++;
++			write_unlock_bh(&arm_state->susp_res_lock);
++			vchiq_log_info(vchiq_susp_log_level, "%s %s resume "
++				"blocked - waiting...", __func__, entity);
++			if (wait_for_completion_killable(
++					&arm_state->resume_blocker) != 0) {
++				vchiq_log_error(vchiq_susp_log_level, "%s %s "
++					"wait for resume blocker interrupted",
++					__func__, entity);
++				ret = VCHIQ_ERROR;
++				write_lock_bh(&arm_state->susp_res_lock);
++				arm_state->blocked_count--;
++				write_unlock_bh(&arm_state->susp_res_lock);
++				goto out;
++			}
++			vchiq_log_info(vchiq_susp_log_level, "%s %s resume "
++				"unblocked", __func__, entity);
++			write_lock_bh(&arm_state->susp_res_lock);
++			if (--arm_state->blocked_count == 0)
++				complete_all(&arm_state->blocked_blocker);
++		}
++	}
++
++	stop_suspend_timer(arm_state);
++
++	local_uc = ++arm_state->videocore_use_count;
++	local_entity_uc = ++(*entity_uc);
++
++	/* If there's a pending request which hasn't yet been serviced then
++	 * just clear it.  If we're past VC_SUSPEND_REQUESTED state then
++	 * vc_resume_complete will block until we either resume or fail to
++	 * suspend */
++	if (arm_state->vc_suspend_state <= VC_SUSPEND_REQUESTED)
++		set_suspend_state(arm_state, VC_SUSPEND_IDLE);
++
++	if ((use_type != USE_TYPE_SERVICE_NO_RESUME) && need_resume(state)) {
++		set_resume_state(arm_state, VC_RESUME_REQUESTED);
++		vchiq_log_info(vchiq_susp_log_level,
++			"%s %s count %d, state count %d",
++			__func__, entity, local_entity_uc, local_uc);
++		request_poll(state, NULL, 0);
++	} else
++		vchiq_log_trace(vchiq_susp_log_level,
++			"%s %s count %d, state count %d",
++			__func__, entity, *entity_uc, local_uc);
++
++
++	write_unlock_bh(&arm_state->susp_res_lock);
++
++	/* Completion is in a done state when we're not suspended, so this won't
++	 * block for the non-suspended case. */
++	if (!try_wait_for_completion(&arm_state->vc_resume_complete)) {
++		vchiq_log_info(vchiq_susp_log_level, "%s %s wait for resume",
++			__func__, entity);
++		if (wait_for_completion_killable(
++				&arm_state->vc_resume_complete) != 0) {
++			vchiq_log_error(vchiq_susp_log_level, "%s %s wait for "
++				"resume interrupted", __func__, entity);
++			ret = VCHIQ_ERROR;
++			goto out;
++		}
++		vchiq_log_info(vchiq_susp_log_level, "%s %s resumed", __func__,
++			entity);
++	}
++
++	if (ret == VCHIQ_SUCCESS) {
++		VCHIQ_STATUS_T status = VCHIQ_SUCCESS;
++		long ack_cnt = atomic_xchg(&arm_state->ka_use_ack_count, 0);
++		while (ack_cnt && (status == VCHIQ_SUCCESS)) {
++			/* Send the use notify to videocore */
++			status = vchiq_send_remote_use_active(state);
++			if (status == VCHIQ_SUCCESS)
++				ack_cnt--;
++			else
++				atomic_add(ack_cnt,
++					&arm_state->ka_use_ack_count);
++		}
++	}
++
++out:
++	vchiq_log_trace(vchiq_susp_log_level, "%s exit %d", __func__, ret);
++	return ret;
++}
++
++VCHIQ_STATUS_T
++vchiq_release_internal(VCHIQ_STATE_T *state, VCHIQ_SERVICE_T *service)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	VCHIQ_STATUS_T ret = VCHIQ_SUCCESS;
++	char entity[16];
++	int *entity_uc;
++	int local_uc, local_entity_uc;
++
++	if (!arm_state)
++		goto out;
++
++	vchiq_log_trace(vchiq_susp_log_level, "%s", __func__);
++
++	if (service) {
++		sprintf(entity, "%c%c%c%c:%03d",
++			VCHIQ_FOURCC_AS_4CHARS(service->base.fourcc),
++			service->client_id);
++		entity_uc = &service->service_use_count;
++	} else {
++		sprintf(entity, "PEER:   ");
++		entity_uc = &arm_state->peer_use_count;
++	}
++
++	write_lock_bh(&arm_state->susp_res_lock);
++	if (!arm_state->videocore_use_count || !(*entity_uc)) {
++		/* Don't use BUG_ON - don't allow user thread to crash kernel */
++		WARN_ON(!arm_state->videocore_use_count);
++		WARN_ON(!(*entity_uc));
++		ret = VCHIQ_ERROR;
++		goto unlock;
++	}
++	local_uc = --arm_state->videocore_use_count;
++	local_entity_uc = --(*entity_uc);
++
++	if (!vchiq_videocore_wanted(state)) {
++		if (vchiq_platform_use_suspend_timer() &&
++				!arm_state->resume_blocked) {
++			/* Only use the timer if we're not trying to force
++			 * suspend (=> resume_blocked) */
++			start_suspend_timer(arm_state);
++		} else {
++			vchiq_log_info(vchiq_susp_log_level,
++				"%s %s count %d, state count %d - suspending",
++				__func__, entity, *entity_uc,
++				arm_state->videocore_use_count);
++			vchiq_arm_vcsuspend(state);
++		}
++	} else
++		vchiq_log_trace(vchiq_susp_log_level,
++			"%s %s count %d, state count %d",
++			__func__, entity, *entity_uc,
++			arm_state->videocore_use_count);
++
++unlock:
++	write_unlock_bh(&arm_state->susp_res_lock);
++
++out:
++	vchiq_log_trace(vchiq_susp_log_level, "%s exit %d", __func__, ret);
++	return ret;
++}
++
++void
++vchiq_on_remote_use(VCHIQ_STATE_T *state)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	vchiq_log_trace(vchiq_susp_log_level, "%s", __func__);
++	atomic_inc(&arm_state->ka_use_count);
++	complete(&arm_state->ka_evt);
++}
++
++void
++vchiq_on_remote_release(VCHIQ_STATE_T *state)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	vchiq_log_trace(vchiq_susp_log_level, "%s", __func__);
++	atomic_inc(&arm_state->ka_release_count);
++	complete(&arm_state->ka_evt);
++}
++
++VCHIQ_STATUS_T
++vchiq_use_service_internal(VCHIQ_SERVICE_T *service)
++{
++	return vchiq_use_internal(service->state, service, USE_TYPE_SERVICE);
++}
++
++VCHIQ_STATUS_T
++vchiq_release_service_internal(VCHIQ_SERVICE_T *service)
++{
++	return vchiq_release_internal(service->state, service);
++}
++
++static void suspend_timer_callback(unsigned long context)
++{
++	VCHIQ_STATE_T *state = (VCHIQ_STATE_T *)context;
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	if (!arm_state)
++		goto out;
++	vchiq_log_info(vchiq_susp_log_level,
++		"%s - suspend timer expired - check suspend", __func__);
++	vchiq_check_suspend(state);
++out:
++	return;
++}
++
++VCHIQ_STATUS_T
++vchiq_use_service_no_resume(VCHIQ_SERVICE_HANDLE_T handle)
++{
++	VCHIQ_STATUS_T ret = VCHIQ_ERROR;
++	VCHIQ_SERVICE_T *service = find_service_by_handle(handle);
++	if (service) {
++		ret = vchiq_use_internal(service->state, service,
++				USE_TYPE_SERVICE_NO_RESUME);
++		unlock_service(service);
++	}
++	return ret;
++}
++
++VCHIQ_STATUS_T
++vchiq_use_service(VCHIQ_SERVICE_HANDLE_T handle)
++{
++	VCHIQ_STATUS_T ret = VCHIQ_ERROR;
++	VCHIQ_SERVICE_T *service = find_service_by_handle(handle);
++	if (service) {
++		ret = vchiq_use_internal(service->state, service,
++				USE_TYPE_SERVICE);
++		unlock_service(service);
++	}
++	return ret;
++}
++
++VCHIQ_STATUS_T
++vchiq_release_service(VCHIQ_SERVICE_HANDLE_T handle)
++{
++	VCHIQ_STATUS_T ret = VCHIQ_ERROR;
++	VCHIQ_SERVICE_T *service = find_service_by_handle(handle);
++	if (service) {
++		ret = vchiq_release_internal(service->state, service);
++		unlock_service(service);
++	}
++	return ret;
++}
++
++void
++vchiq_dump_service_use_state(VCHIQ_STATE_T *state)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	int i, j = 0;
++	/* Only dump 64 services */
++	static const int local_max_services = 64;
++	/* If there's more than 64 services, only dump ones with
++	 * non-zero counts */
++	int only_nonzero = 0;
++	static const char *nz = "<-- preventing suspend";
++
++	enum vc_suspend_status vc_suspend_state;
++	enum vc_resume_status  vc_resume_state;
++	int peer_count;
++	int vc_use_count;
++	int active_services;
++	struct service_data_struct {
++		int fourcc;
++		int clientid;
++		int use_count;
++	} service_data[local_max_services];
++
++	if (!arm_state)
++		return;
++
++	read_lock_bh(&arm_state->susp_res_lock);
++	vc_suspend_state = arm_state->vc_suspend_state;
++	vc_resume_state  = arm_state->vc_resume_state;
++	peer_count = arm_state->peer_use_count;
++	vc_use_count = arm_state->videocore_use_count;
++	active_services = state->unused_service;
++	if (active_services > local_max_services)
++		only_nonzero = 1;
++
++	for (i = 0; (i < active_services) && (j < local_max_services); i++) {
++		VCHIQ_SERVICE_T *service_ptr = state->services[i];
++		if (!service_ptr)
++			continue;
++
++		if (only_nonzero && !service_ptr->service_use_count)
++			continue;
++
++		if (service_ptr->srvstate != VCHIQ_SRVSTATE_FREE) {
++			service_data[j].fourcc = service_ptr->base.fourcc;
++			service_data[j].clientid = service_ptr->client_id;
++			service_data[j++].use_count = service_ptr->
++							service_use_count;
++		}
++	}
++
++	read_unlock_bh(&arm_state->susp_res_lock);
++
++	vchiq_log_warning(vchiq_susp_log_level,
++		"-- Videcore suspend state: %s --",
++		suspend_state_names[vc_suspend_state + VC_SUSPEND_NUM_OFFSET]);
++	vchiq_log_warning(vchiq_susp_log_level,
++		"-- Videcore resume state: %s --",
++		resume_state_names[vc_resume_state + VC_RESUME_NUM_OFFSET]);
++
++	if (only_nonzero)
++		vchiq_log_warning(vchiq_susp_log_level, "Too many active "
++			"services (%d).  Only dumping up to first %d services "
++			"with non-zero use-count", active_services,
++			local_max_services);
++
++	for (i = 0; i < j; i++) {
++		vchiq_log_warning(vchiq_susp_log_level,
++			"----- %c%c%c%c:%d service count %d %s",
++			VCHIQ_FOURCC_AS_4CHARS(service_data[i].fourcc),
++			service_data[i].clientid,
++			service_data[i].use_count,
++			service_data[i].use_count ? nz : "");
++	}
++	vchiq_log_warning(vchiq_susp_log_level,
++		"----- VCHIQ use count count %d", peer_count);
++	vchiq_log_warning(vchiq_susp_log_level,
++		"--- Overall vchiq instance use count %d", vc_use_count);
++
++	vchiq_dump_platform_use_state(state);
++}
++
++VCHIQ_STATUS_T
++vchiq_check_service(VCHIQ_SERVICE_T *service)
++{
++	VCHIQ_ARM_STATE_T *arm_state;
++	VCHIQ_STATUS_T ret = VCHIQ_ERROR;
++
++	if (!service || !service->state)
++		goto out;
++
++	vchiq_log_trace(vchiq_susp_log_level, "%s", __func__);
++
++	arm_state = vchiq_platform_get_arm_state(service->state);
++
++	read_lock_bh(&arm_state->susp_res_lock);
++	if (service->service_use_count)
++		ret = VCHIQ_SUCCESS;
++	read_unlock_bh(&arm_state->susp_res_lock);
++
++	if (ret == VCHIQ_ERROR) {
++		vchiq_log_error(vchiq_susp_log_level,
++			"%s ERROR - %c%c%c%c:%d service count %d, "
++			"state count %d, videocore suspend state %s", __func__,
++			VCHIQ_FOURCC_AS_4CHARS(service->base.fourcc),
++			service->client_id, service->service_use_count,
++			arm_state->videocore_use_count,
++			suspend_state_names[arm_state->vc_suspend_state +
++						VC_SUSPEND_NUM_OFFSET]);
++		vchiq_dump_service_use_state(service->state);
++	}
++out:
++	return ret;
++}
++
++/* stub functions */
++void vchiq_on_remote_use_active(VCHIQ_STATE_T *state)
++{
++	(void)state;
++}
++
++void vchiq_platform_conn_state_changed(VCHIQ_STATE_T *state,
++	VCHIQ_CONNSTATE_T oldstate, VCHIQ_CONNSTATE_T newstate)
++{
++	VCHIQ_ARM_STATE_T *arm_state = vchiq_platform_get_arm_state(state);
++	vchiq_log_info(vchiq_susp_log_level, "%d: %s->%s", state->id,
++		get_conn_state_name(oldstate), get_conn_state_name(newstate));
++	if (state->conn_state == VCHIQ_CONNSTATE_CONNECTED) {
++		write_lock_bh(&arm_state->susp_res_lock);
++		if (!arm_state->first_connect) {
++			char threadname[10];
++			arm_state->first_connect = 1;
++			write_unlock_bh(&arm_state->susp_res_lock);
++			snprintf(threadname, sizeof(threadname), "VCHIQka-%d",
++				state->id);
++			arm_state->ka_thread = kthread_create(
++				&vchiq_keepalive_thread_func,
++				(void *)state,
++				threadname);
++			if (arm_state->ka_thread == NULL) {
++				vchiq_log_error(vchiq_susp_log_level,
++					"vchiq: FATAL: couldn't create thread %s",
++					threadname);
++			} else {
++				wake_up_process(arm_state->ka_thread);
++			}
++		} else
++			write_unlock_bh(&arm_state->susp_res_lock);
++	}
++}
++
++
++/****************************************************************************
++*
++*   vchiq_init - called when the module is loaded.
++*
++***************************************************************************/
++
++static int __init
++vchiq_init(void)
++{
++	int err;
++	void *ptr_err;
++
++	/* create proc entries */
++	err = vchiq_proc_init();
++	if (err != 0)
++		goto failed_proc_init;
++
++	err = alloc_chrdev_region(&vchiq_devid, VCHIQ_MINOR, 1, DEVICE_NAME);
++	if (err != 0) {
++		vchiq_log_error(vchiq_arm_log_level,
++			"Unable to allocate device number");
++		goto failed_alloc_chrdev;
++	}
++	cdev_init(&vchiq_cdev, &vchiq_fops);
++	vchiq_cdev.owner = THIS_MODULE;
++	err = cdev_add(&vchiq_cdev, vchiq_devid, 1);
++	if (err != 0) {
++		vchiq_log_error(vchiq_arm_log_level,
++			"Unable to register device");
++		goto failed_cdev_add;
++	}
++
++	/* create sysfs entries */
++	vchiq_class = class_create(THIS_MODULE, DEVICE_NAME);
++	ptr_err = vchiq_class;
++	if (IS_ERR(ptr_err))
++		goto failed_class_create;
++
++	vchiq_dev = device_create(vchiq_class, NULL,
++		vchiq_devid, NULL, "vchiq");
++	ptr_err = vchiq_dev;
++	if (IS_ERR(ptr_err))
++		goto failed_device_create;
++
++	err = vchiq_platform_init(&g_state);
++	if (err != 0)
++		goto failed_platform_init;
++
++	vchiq_log_info(vchiq_arm_log_level,
++		"vchiq: initialised - version %d (min %d), device %d.%d",
++		VCHIQ_VERSION, VCHIQ_VERSION_MIN,
++		MAJOR(vchiq_devid), MINOR(vchiq_devid));
++
++	return 0;
++
++failed_platform_init:
++	device_destroy(vchiq_class, vchiq_devid);
++failed_device_create:
++	class_destroy(vchiq_class);
++failed_class_create:
++	cdev_del(&vchiq_cdev);
++	err = PTR_ERR(ptr_err);
++failed_cdev_add:
++	unregister_chrdev_region(vchiq_devid, 1);
++failed_alloc_chrdev:
++	vchiq_proc_deinit();
++failed_proc_init:
++	vchiq_log_warning(vchiq_arm_log_level, "could not load vchiq");
++	return err;
++}
++
++static int vchiq_instance_get_use_count(VCHIQ_INSTANCE_T instance)
++{
++	VCHIQ_SERVICE_T *service;
++	int use_count = 0, i;
++	i = 0;
++	while ((service = next_service_by_instance(instance->state,
++		instance, &i)) != NULL) {
++		use_count += service->service_use_count;
++		unlock_service(service);
++	}
++	return use_count;
++}
++
++/* read the per-process use-count */
++static int proc_read_use_count(char *page, char **start,
++			       off_t off, int count,
++			       int *eof, void *data)
++{
++	VCHIQ_INSTANCE_T instance = data;
++	int len, use_count;
++
++	use_count = vchiq_instance_get_use_count(instance);
++	len = snprintf(page+off, count, "%d\n", use_count);
++
++	return len;
++}
++
++/* add an instance (process) to the proc entries */
++static int vchiq_proc_add_instance(VCHIQ_INSTANCE_T instance)
++{
++#if 1
++	return 0;
++#else
++	char pidstr[32];
++	struct proc_dir_entry *top, *use_count;
++	struct proc_dir_entry *clients = vchiq_clients_top();
++	int pid = instance->pid;
++
++	snprintf(pidstr, sizeof(pidstr), "%d", pid);
++	top = proc_mkdir(pidstr, clients);
++	if (!top)
++		goto fail_top;
++
++	use_count = create_proc_read_entry("use_count",
++					   0444, top,
++					   proc_read_use_count,
++					   instance);
++	if (!use_count)
++		goto fail_use_count;
++
++	instance->proc_entry = top;
++
++	return 0;
++
++fail_use_count:
++	remove_proc_entry(top->name, clients);
++fail_top:
++	return -ENOMEM;
++#endif
++}
++
++static void vchiq_proc_remove_instance(VCHIQ_INSTANCE_T instance)
++{
++#if 0
++	struct proc_dir_entry *clients = vchiq_clients_top();
++	remove_proc_entry("use_count", instance->proc_entry);
++	remove_proc_entry(instance->proc_entry->name, clients);
++#endif
++}
++
++/****************************************************************************
++*
++*   vchiq_exit - called when the module is unloaded.
++*
++***************************************************************************/
++
++static void __exit
++vchiq_exit(void)
++{
++	vchiq_platform_exit(&g_state);
++	device_destroy(vchiq_class, vchiq_devid);
++	class_destroy(vchiq_class);
++	cdev_del(&vchiq_cdev);
++	unregister_chrdev_region(vchiq_devid, 1);
++}
++
++module_init(vchiq_init);
++module_exit(vchiq_exit);
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Broadcom Corporation");
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.h linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.h
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.h	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,212 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHIQ_ARM_H
++#define VCHIQ_ARM_H
++
++#include <linux/mutex.h>
++#include <linux/semaphore.h>
++#include <linux/atomic.h>
++#include "vchiq_core.h"
++
++
++enum vc_suspend_status {
++	VC_SUSPEND_FORCE_CANCELED = -3, /* Force suspend canceled, too busy */
++	VC_SUSPEND_REJECTED = -2,  /* Videocore rejected suspend request */
++	VC_SUSPEND_FAILED = -1,    /* Videocore suspend failed */
++	VC_SUSPEND_IDLE = 0,       /* VC active, no suspend actions */
++	VC_SUSPEND_REQUESTED,      /* User has requested suspend */
++	VC_SUSPEND_IN_PROGRESS,    /* Slot handler has recvd suspend request */
++	VC_SUSPEND_SUSPENDED       /* Videocore suspend succeeded */
++};
++
++enum vc_resume_status {
++	VC_RESUME_FAILED = -1, /* Videocore resume failed */
++	VC_RESUME_IDLE = 0,    /* VC suspended, no resume actions */
++	VC_RESUME_REQUESTED,   /* User has requested resume */
++	VC_RESUME_IN_PROGRESS, /* Slot handler has received resume request */
++	VC_RESUME_RESUMED      /* Videocore resumed successfully (active) */
++};
++
++
++enum USE_TYPE_E {
++	USE_TYPE_SERVICE,
++	USE_TYPE_SERVICE_NO_RESUME,
++	USE_TYPE_VCHIQ
++};
++
++
++
++typedef struct vchiq_arm_state_struct {
++	/* Keepalive-related data */
++	struct task_struct *ka_thread;
++	struct completion ka_evt;
++	atomic_t ka_use_count;
++	atomic_t ka_use_ack_count;
++	atomic_t ka_release_count;
++
++	struct completion vc_suspend_complete;
++	struct completion vc_resume_complete;
++
++	rwlock_t susp_res_lock;
++	enum vc_suspend_status vc_suspend_state;
++	enum vc_resume_status vc_resume_state;
++
++	unsigned int wake_address;
++
++	struct timer_list suspend_timer;
++	int suspend_timer_timeout;
++	int suspend_timer_running;
++
++	/* Global use count for videocore.
++	** This is equal to the sum of the use counts for all services.  When
++	** this hits zero the videocore suspend procedure will be initiated.
++	*/
++	int videocore_use_count;
++
++	/* Use count to track requests from videocore peer.
++	** This use count is not associated with a service, so needs to be
++	** tracked separately with the state.
++	*/
++	int peer_use_count;
++
++	/* Flag to indicate whether resume is blocked.  This happens when the
++	** ARM is suspending
++	*/
++	struct completion resume_blocker;
++	int resume_blocked;
++	struct completion blocked_blocker;
++	int blocked_count;
++
++	int autosuspend_override;
++
++	/* Flag to indicate that the first vchiq connect has made it through.
++	** This means that both sides should be fully ready, and we should
++	** be able to suspend after this point.
++	*/
++	int first_connect;
++
++	unsigned long long suspend_start_time;
++	unsigned long long sleep_start_time;
++	unsigned long long resume_start_time;
++	unsigned long long last_wake_time;
++
++} VCHIQ_ARM_STATE_T;
++
++extern int vchiq_arm_log_level;
++extern int vchiq_susp_log_level;
++
++extern int __init
++vchiq_platform_init(VCHIQ_STATE_T *state);
++
++extern void __exit
++vchiq_platform_exit(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATE_T *
++vchiq_get_state(void);
++
++extern VCHIQ_STATUS_T
++vchiq_arm_vcsuspend(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATUS_T
++vchiq_arm_force_suspend(VCHIQ_STATE_T *state);
++
++extern int
++vchiq_arm_allow_resume(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATUS_T
++vchiq_arm_vcresume(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATUS_T
++vchiq_arm_init_state(VCHIQ_STATE_T *state, VCHIQ_ARM_STATE_T *arm_state);
++
++extern int
++vchiq_check_resume(VCHIQ_STATE_T *state);
++
++extern void
++vchiq_check_suspend(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATUS_T
++vchiq_use_service(VCHIQ_SERVICE_HANDLE_T handle);
++
++extern VCHIQ_STATUS_T
++vchiq_release_service(VCHIQ_SERVICE_HANDLE_T handle);
++
++extern VCHIQ_STATUS_T
++vchiq_check_service(VCHIQ_SERVICE_T *service);
++
++extern VCHIQ_STATUS_T
++vchiq_platform_suspend(VCHIQ_STATE_T *state);
++
++extern int
++vchiq_platform_videocore_wanted(VCHIQ_STATE_T *state);
++
++extern int
++vchiq_platform_use_suspend_timer(void);
++
++extern void
++vchiq_dump_platform_use_state(VCHIQ_STATE_T *state);
++
++extern void
++vchiq_dump_service_use_state(VCHIQ_STATE_T *state);
++
++extern VCHIQ_ARM_STATE_T*
++vchiq_platform_get_arm_state(VCHIQ_STATE_T *state);
++
++extern int
++vchiq_videocore_wanted(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATUS_T
++vchiq_use_internal(VCHIQ_STATE_T *state, VCHIQ_SERVICE_T *service,
++		enum USE_TYPE_E use_type);
++extern VCHIQ_STATUS_T
++vchiq_release_internal(VCHIQ_STATE_T *state, VCHIQ_SERVICE_T *service);
++
++void
++set_suspend_state(VCHIQ_ARM_STATE_T *arm_state,
++	enum vc_suspend_status new_state);
++
++void
++set_resume_state(VCHIQ_ARM_STATE_T *arm_state,
++	enum vc_resume_status new_state);
++
++void
++start_suspend_timer(VCHIQ_ARM_STATE_T *arm_state);
++
++extern int vchiq_proc_init(void);
++extern void vchiq_proc_deinit(void);
++extern struct proc_dir_entry *vchiq_proc_top(void);
++extern struct proc_dir_entry *vchiq_clients_top(void);
++
++
++#endif /* VCHIQ_ARM_H */
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_build_info.h linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_build_info.h
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_build_info.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_build_info.h	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,37 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++const char *vchiq_get_build_hostname(void);
++const char *vchiq_get_build_version(void);
++const char *vchiq_get_build_time(void);
++const char *vchiq_get_build_date(void);
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_cfg.h linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_cfg.h
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_cfg.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_cfg.h	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,60 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHIQ_CFG_H
++#define VCHIQ_CFG_H
++
++#define VCHIQ_MAGIC              VCHIQ_MAKE_FOURCC('V', 'C', 'H', 'I')
++/* The version of VCHIQ - change with any non-trivial change */
++#define VCHIQ_VERSION            6
++/* The minimum compatible version - update to match VCHIQ_VERSION with any
++** incompatible change */
++#define VCHIQ_VERSION_MIN        3
++
++#define VCHIQ_MAX_STATES         1
++#define VCHIQ_MAX_SERVICES       4096
++#define VCHIQ_MAX_SLOTS          128
++#define VCHIQ_MAX_SLOTS_PER_SIDE 64
++
++#define VCHIQ_NUM_CURRENT_BULKS        32
++#define VCHIQ_NUM_SERVICE_BULKS        4
++
++#ifndef VCHIQ_ENABLE_DEBUG
++#define VCHIQ_ENABLE_DEBUG             1
++#endif
++
++#ifndef VCHIQ_ENABLE_STATS
++#define VCHIQ_ENABLE_STATS             1
++#endif
++
++#endif /* VCHIQ_CFG_H */
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.c linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.c
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.c	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,119 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#include "vchiq_connected.h"
++#include "vchiq_core.h"
++#include <linux/module.h>
++#include <linux/mutex.h>
++
++#define  MAX_CALLBACKS  10
++
++static   int                        g_connected;
++static   int                        g_num_deferred_callbacks;
++static   VCHIQ_CONNECTED_CALLBACK_T g_deferred_callback[MAX_CALLBACKS];
++static   int                        g_once_init;
++static   struct mutex               g_connected_mutex;
++
++/****************************************************************************
++*
++* Function to initialize our lock.
++*
++***************************************************************************/
++
++static void connected_init(void)
++{
++	if (!g_once_init) {
++		mutex_init(&g_connected_mutex);
++		g_once_init = 1;
++	}
++}
++
++/****************************************************************************
++*
++* This function is used to defer initialization until the vchiq stack is
++* initialized. If the stack is already initialized, then the callback will
++* be made immediately, otherwise it will be deferred until
++* vchiq_call_connected_callbacks is called.
++*
++***************************************************************************/
++
++void vchiq_add_connected_callback(VCHIQ_CONNECTED_CALLBACK_T callback)
++{
++	connected_init();
++
++	if (mutex_lock_interruptible(&g_connected_mutex) != 0)
++		return;
++
++	if (g_connected)
++		/* We're already connected. Call the callback immediately. */
++
++		callback();
++	else {
++		if (g_num_deferred_callbacks >= MAX_CALLBACKS)
++			vchiq_log_error(vchiq_core_log_level,
++				"There already %d callback registered - "
++				"please increase MAX_CALLBACKS",
++				g_num_deferred_callbacks);
++		else {
++			g_deferred_callback[g_num_deferred_callbacks] =
++				callback;
++			g_num_deferred_callbacks++;
++		}
++	}
++	mutex_unlock(&g_connected_mutex);
++}
++
++/****************************************************************************
++*
++* This function is called by the vchiq stack once it has been connected to
++* the videocore and clients can start to use the stack.
++*
++***************************************************************************/
++
++void vchiq_call_connected_callbacks(void)
++{
++	int i;
++
++	connected_init();
++
++	if (mutex_lock_interruptible(&g_connected_mutex) != 0)
++		return;
++
++	for (i = 0; i <  g_num_deferred_callbacks; i++)
++		g_deferred_callback[i]();
++
++	g_num_deferred_callbacks = 0;
++	g_connected = 1;
++	mutex_unlock(&g_connected_mutex);
++}
++EXPORT_SYMBOL(vchiq_add_connected_callback);
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.h linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.h
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.h	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,50 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHIQ_CONNECTED_H
++#define VCHIQ_CONNECTED_H
++
++/* ---- Include Files ----------------------------------------------------- */
++
++/* ---- Constants and Types ---------------------------------------------- */
++
++typedef void (*VCHIQ_CONNECTED_CALLBACK_T)(void);
++
++/* ---- Variable Externs ------------------------------------------------- */
++
++/* ---- Function Prototypes ---------------------------------------------- */
++
++void vchiq_add_connected_callback(VCHIQ_CONNECTED_CALLBACK_T callback);
++void vchiq_call_connected_callbacks(void);
++
++#endif /* VCHIQ_CONNECTED_H */
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.c linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.c
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.c	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,3824 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#include "vchiq_core.h"
++
++#define VCHIQ_SLOT_HANDLER_STACK 8192
++
++#define HANDLE_STATE_SHIFT 12
++
++#define SLOT_INFO_FROM_INDEX(state, index) (state->slot_info + (index))
++#define SLOT_DATA_FROM_INDEX(state, index) (state->slot_data + (index))
++#define SLOT_INDEX_FROM_DATA(state, data) \
++	(((unsigned int)((char *)data - (char *)state->slot_data)) / \
++	VCHIQ_SLOT_SIZE)
++#define SLOT_INDEX_FROM_INFO(state, info) \
++	((unsigned int)(info - state->slot_info))
++#define SLOT_QUEUE_INDEX_FROM_POS(pos) \
++	((int)((unsigned int)(pos) / VCHIQ_SLOT_SIZE))
++
++
++#define BULK_INDEX(x) (x & (VCHIQ_NUM_SERVICE_BULKS - 1))
++
++
++struct vchiq_open_payload {
++	int fourcc;
++	int client_id;
++	short version;
++	short version_min;
++};
++
++struct vchiq_openack_payload {
++	short version;
++};
++
++/* we require this for consistency between endpoints */
++vchiq_static_assert(sizeof(VCHIQ_HEADER_T) == 8);
++vchiq_static_assert(IS_POW2(sizeof(VCHIQ_HEADER_T)));
++vchiq_static_assert(IS_POW2(VCHIQ_NUM_CURRENT_BULKS));
++vchiq_static_assert(IS_POW2(VCHIQ_NUM_SERVICE_BULKS));
++vchiq_static_assert(IS_POW2(VCHIQ_MAX_SERVICES));
++vchiq_static_assert(VCHIQ_VERSION >= VCHIQ_VERSION_MIN);
++
++/* Run time control of log level, based on KERN_XXX level. */
++int vchiq_core_log_level = VCHIQ_LOG_DEFAULT;
++int vchiq_core_msg_log_level = VCHIQ_LOG_DEFAULT;
++int vchiq_sync_log_level = VCHIQ_LOG_DEFAULT;
++
++static atomic_t pause_bulks_count = ATOMIC_INIT(0);
++
++static DEFINE_SPINLOCK(service_spinlock);
++DEFINE_SPINLOCK(bulk_waiter_spinlock);
++DEFINE_SPINLOCK(quota_spinlock);
++
++VCHIQ_STATE_T *vchiq_states[VCHIQ_MAX_STATES];
++static unsigned int handle_seq;
++
++static const char *const srvstate_names[] = {
++	"FREE",
++	"HIDDEN",
++	"LISTENING",
++	"OPENING",
++	"OPEN",
++	"OPENSYNC",
++	"CLOSESENT",
++	"CLOSERECVD",
++	"CLOSEWAIT",
++	"CLOSED"
++};
++
++static const char *const reason_names[] = {
++	"SERVICE_OPENED",
++	"SERVICE_CLOSED",
++	"MESSAGE_AVAILABLE",
++	"BULK_TRANSMIT_DONE",
++	"BULK_RECEIVE_DONE",
++	"BULK_TRANSMIT_ABORTED",
++	"BULK_RECEIVE_ABORTED"
++};
++
++static const char *const conn_state_names[] = {
++	"DISCONNECTED",
++	"CONNECTING",
++	"CONNECTED",
++	"PAUSING",
++	"PAUSE_SENT",
++	"PAUSED",
++	"RESUMING",
++	"PAUSE_TIMEOUT",
++	"RESUME_TIMEOUT"
++};
++
++
++static void
++release_message_sync(VCHIQ_STATE_T *state, VCHIQ_HEADER_T *header);
++
++static const char *msg_type_str(unsigned int msg_type)
++{
++	switch (msg_type) {
++	case VCHIQ_MSG_PADDING:       return "PADDING";
++	case VCHIQ_MSG_CONNECT:       return "CONNECT";
++	case VCHIQ_MSG_OPEN:          return "OPEN";
++	case VCHIQ_MSG_OPENACK:       return "OPENACK";
++	case VCHIQ_MSG_CLOSE:         return "CLOSE";
++	case VCHIQ_MSG_DATA:          return "DATA";
++	case VCHIQ_MSG_BULK_RX:       return "BULK_RX";
++	case VCHIQ_MSG_BULK_TX:       return "BULK_TX";
++	case VCHIQ_MSG_BULK_RX_DONE:  return "BULK_RX_DONE";
++	case VCHIQ_MSG_BULK_TX_DONE:  return "BULK_TX_DONE";
++	case VCHIQ_MSG_PAUSE:         return "PAUSE";
++	case VCHIQ_MSG_RESUME:        return "RESUME";
++	case VCHIQ_MSG_REMOTE_USE:    return "REMOTE_USE";
++	case VCHIQ_MSG_REMOTE_RELEASE:      return "REMOTE_RELEASE";
++	case VCHIQ_MSG_REMOTE_USE_ACTIVE:   return "REMOTE_USE_ACTIVE";
++	}
++	return "???";
++}
++
++static inline void
++vchiq_set_service_state(VCHIQ_SERVICE_T *service, int newstate)
++{
++	vchiq_log_info(vchiq_core_log_level, "%d: srv:%d %s->%s",
++		service->state->id, service->localport,
++		srvstate_names[service->srvstate],
++		srvstate_names[newstate]);
++	service->srvstate = newstate;
++}
++
++VCHIQ_SERVICE_T *
++find_service_by_handle(VCHIQ_SERVICE_HANDLE_T handle)
++{
++	VCHIQ_SERVICE_T *service;
++
++	spin_lock(&service_spinlock);
++	service = handle_to_service(handle);
++	if (service && (service->srvstate != VCHIQ_SRVSTATE_FREE) &&
++		(service->handle == handle)) {
++		BUG_ON(service->ref_count == 0);
++		service->ref_count++;
++	} else
++		service = NULL;
++	spin_unlock(&service_spinlock);
++
++	if (!service)
++		vchiq_log_info(vchiq_core_log_level,
++			"Invalid service handle 0x%x", handle);
++
++	return service;
++}
++
++VCHIQ_SERVICE_T *
++find_service_by_port(VCHIQ_STATE_T *state, int localport)
++{
++	VCHIQ_SERVICE_T *service = NULL;
++	if ((unsigned int)localport <= VCHIQ_PORT_MAX) {
++		spin_lock(&service_spinlock);
++		service = state->services[localport];
++		if (service && (service->srvstate != VCHIQ_SRVSTATE_FREE)) {
++			BUG_ON(service->ref_count == 0);
++			service->ref_count++;
++		} else
++			service = NULL;
++		spin_unlock(&service_spinlock);
++	}
++
++	if (!service)
++		vchiq_log_info(vchiq_core_log_level,
++			"Invalid port %d", localport);
++
++	return service;
++}
++
++VCHIQ_SERVICE_T *
++find_service_for_instance(VCHIQ_INSTANCE_T instance,
++	VCHIQ_SERVICE_HANDLE_T handle) {
++	VCHIQ_SERVICE_T *service;
++
++	spin_lock(&service_spinlock);
++	service = handle_to_service(handle);
++	if (service && (service->srvstate != VCHIQ_SRVSTATE_FREE) &&
++		(service->handle == handle) &&
++		(service->instance == instance)) {
++		BUG_ON(service->ref_count == 0);
++		service->ref_count++;
++	} else
++		service = NULL;
++	spin_unlock(&service_spinlock);
++
++	if (!service)
++		vchiq_log_info(vchiq_core_log_level,
++			"Invalid service handle 0x%x", handle);
++
++	return service;
++}
++
++VCHIQ_SERVICE_T *
++next_service_by_instance(VCHIQ_STATE_T *state, VCHIQ_INSTANCE_T instance,
++	int *pidx)
++{
++	VCHIQ_SERVICE_T *service = NULL;
++	int idx = *pidx;
++
++	spin_lock(&service_spinlock);
++	while (idx < state->unused_service) {
++		VCHIQ_SERVICE_T *srv = state->services[idx++];
++		if (srv && (srv->srvstate != VCHIQ_SRVSTATE_FREE) &&
++			(srv->instance == instance)) {
++			service = srv;
++			BUG_ON(service->ref_count == 0);
++			service->ref_count++;
++			break;
++		}
++	}
++	spin_unlock(&service_spinlock);
++
++	*pidx = idx;
++
++	return service;
++}
++
++void
++lock_service(VCHIQ_SERVICE_T *service)
++{
++	spin_lock(&service_spinlock);
++	BUG_ON(!service || (service->ref_count == 0));
++	if (service)
++		service->ref_count++;
++	spin_unlock(&service_spinlock);
++}
++
++void
++unlock_service(VCHIQ_SERVICE_T *service)
++{
++	VCHIQ_STATE_T *state = service->state;
++	spin_lock(&service_spinlock);
++	BUG_ON(!service || (service->ref_count == 0));
++	if (service && service->ref_count) {
++		service->ref_count--;
++		if (!service->ref_count) {
++			BUG_ON(service->srvstate != VCHIQ_SRVSTATE_FREE);
++			state->services[service->localport] = NULL;
++		} else
++			service = NULL;
++	}
++	spin_unlock(&service_spinlock);
++
++	if (service && service->userdata_term)
++		service->userdata_term(service->base.userdata);
++
++	kfree(service);
++}
++
++int
++vchiq_get_client_id(VCHIQ_SERVICE_HANDLE_T handle)
++{
++	VCHIQ_SERVICE_T *service = find_service_by_handle(handle);
++	int id;
++
++	id = service ? service->client_id : 0;
++	if (service)
++		unlock_service(service);
++
++	return id;
++}
++
++void *
++vchiq_get_service_userdata(VCHIQ_SERVICE_HANDLE_T handle)
++{
++	VCHIQ_SERVICE_T *service = handle_to_service(handle);
++
++	return service ? service->base.userdata : NULL;
++}
++
++int
++vchiq_get_service_fourcc(VCHIQ_SERVICE_HANDLE_T handle)
++{
++	VCHIQ_SERVICE_T *service = handle_to_service(handle);
++
++	return service ? service->base.fourcc : 0;
++}
++
++static void
++mark_service_closing_internal(VCHIQ_SERVICE_T *service, int sh_thread)
++{
++	VCHIQ_STATE_T *state = service->state;
++	VCHIQ_SERVICE_QUOTA_T *service_quota;
++
++	service->closing = 1;
++
++	/* Synchronise with other threads. */
++	mutex_lock(&state->recycle_mutex);
++	mutex_unlock(&state->recycle_mutex);
++	if (!sh_thread || (state->conn_state != VCHIQ_CONNSTATE_PAUSE_SENT)) {
++		/* If we're pausing then the slot_mutex is held until resume
++		 * by the slot handler.  Therefore don't try to acquire this
++		 * mutex if we're the slot handler and in the pause sent state.
++		 * We don't need to in this case anyway. */
++		mutex_lock(&state->slot_mutex);
++		mutex_unlock(&state->slot_mutex);
++	}
++
++	/* Unblock any sending thread. */
++	service_quota = &state->service_quotas[service->localport];
++	up(&service_quota->quota_event);
++}
++
++static void
++mark_service_closing(VCHIQ_SERVICE_T *service)
++{
++	mark_service_closing_internal(service, 0);
++}
++
++static inline VCHIQ_STATUS_T
++make_service_callback(VCHIQ_SERVICE_T *service, VCHIQ_REASON_T reason,
++	VCHIQ_HEADER_T *header, void *bulk_userdata)
++{
++	VCHIQ_STATUS_T status;
++	vchiq_log_trace(vchiq_core_log_level, "%d: callback:%d (%s, %x, %x)",
++		service->state->id, service->localport, reason_names[reason],
++		(unsigned int)header, (unsigned int)bulk_userdata);
++	status = service->base.callback(reason, header, service->handle,
++		bulk_userdata);
++	if (status == VCHIQ_ERROR) {
++		vchiq_log_warning(vchiq_core_log_level,
++			"%d: ignoring ERROR from callback to service %x",
++			service->state->id, service->handle);
++		status = VCHIQ_SUCCESS;
++	}
++	return status;
++}
++
++inline void
++vchiq_set_conn_state(VCHIQ_STATE_T *state, VCHIQ_CONNSTATE_T newstate)
++{
++	VCHIQ_CONNSTATE_T oldstate = state->conn_state;
++	vchiq_log_info(vchiq_core_log_level, "%d: %s->%s", state->id,
++		conn_state_names[oldstate],
++		conn_state_names[newstate]);
++	state->conn_state = newstate;
++	vchiq_platform_conn_state_changed(state, oldstate, newstate);
++}
++
++static inline void
++remote_event_create(REMOTE_EVENT_T *event)
++{
++	event->armed = 0;
++	/* Don't clear the 'fired' flag because it may already have been set
++	** by the other side. */
++	sema_init(event->event, 0);
++}
++
++static inline void
++remote_event_destroy(REMOTE_EVENT_T *event)
++{
++	(void)event;
++}
++
++static inline int
++remote_event_wait(REMOTE_EVENT_T *event)
++{
++	if (!event->fired) {
++		event->armed = 1;
++		dsb();
++		if (!event->fired) {
++			if (down_interruptible(event->event) != 0) {
++				event->armed = 0;
++				return 0;
++			}
++		}
++		event->armed = 0;
++		wmb();
++	}
++
++	event->fired = 0;
++	return 1;
++}
++
++static inline void
++remote_event_signal_local(REMOTE_EVENT_T *event)
++{
++	event->armed = 0;
++	up(event->event);
++}
++
++static inline void
++remote_event_poll(REMOTE_EVENT_T *event)
++{
++	if (event->fired && event->armed)
++		remote_event_signal_local(event);
++}
++
++void
++remote_event_pollall(VCHIQ_STATE_T *state)
++{
++	remote_event_poll(&state->local->sync_trigger);
++	remote_event_poll(&state->local->sync_release);
++	remote_event_poll(&state->local->trigger);
++	remote_event_poll(&state->local->recycle);
++}
++
++/* Round up message sizes so that any space at the end of a slot is always big
++** enough for a header. This relies on header size being a power of two, which
++** has been verified earlier by a static assertion. */
++
++static inline unsigned int
++calc_stride(unsigned int size)
++{
++	/* Allow room for the header */
++	size += sizeof(VCHIQ_HEADER_T);
++
++	/* Round up */
++	return (size + sizeof(VCHIQ_HEADER_T) - 1) & ~(sizeof(VCHIQ_HEADER_T)
++		- 1);
++}
++
++/* Called by the slot handler thread */
++static VCHIQ_SERVICE_T *
++get_listening_service(VCHIQ_STATE_T *state, int fourcc)
++{
++	int i;
++
++	WARN_ON(fourcc == VCHIQ_FOURCC_INVALID);
++
++	for (i = 0; i < state->unused_service; i++) {
++		VCHIQ_SERVICE_T *service = state->services[i];
++		if (service &&
++			(service->public_fourcc == fourcc) &&
++			((service->srvstate == VCHIQ_SRVSTATE_LISTENING) ||
++			((service->srvstate == VCHIQ_SRVSTATE_OPEN) &&
++			(service->remoteport == VCHIQ_PORT_FREE)))) {
++			lock_service(service);
++			return service;
++		}
++	}
++
++	return NULL;
++}
++
++/* Called by the slot handler thread */
++static VCHIQ_SERVICE_T *
++get_connected_service(VCHIQ_STATE_T *state, unsigned int port)
++{
++	int i;
++	for (i = 0; i < state->unused_service; i++) {
++		VCHIQ_SERVICE_T *service = state->services[i];
++		if (service && (service->srvstate == VCHIQ_SRVSTATE_OPEN)
++			&& (service->remoteport == port)) {
++			lock_service(service);
++			return service;
++		}
++	}
++	return NULL;
++}
++
++inline void
++request_poll(VCHIQ_STATE_T *state, VCHIQ_SERVICE_T *service, int poll_type)
++{
++	uint32_t value;
++
++	if (service) {
++		do {
++			value = atomic_read(&service->poll_flags);
++		} while (atomic_cmpxchg(&service->poll_flags, value,
++			value | (1 << poll_type)) != value);
++
++		do {
++			value = atomic_read(&state->poll_services[
++				service->localport>>5]);
++		} while (atomic_cmpxchg(
++			&state->poll_services[service->localport>>5],
++			value, value | (1 << (service->localport & 0x1f)))
++			!= value);
++	}
++
++	state->poll_needed = 1;
++	wmb();
++
++	/* ... and ensure the slot handler runs. */
++	remote_event_signal_local(&state->local->trigger);
++}
++
++/* Called from queue_message, by the slot handler and application threads,
++** with slot_mutex held */
++static VCHIQ_HEADER_T *
++reserve_space(VCHIQ_STATE_T *state, int space, int is_blocking)
++{
++	VCHIQ_SHARED_STATE_T *local = state->local;
++	int tx_pos = state->local_tx_pos;
++	int slot_space = VCHIQ_SLOT_SIZE - (tx_pos & VCHIQ_SLOT_MASK);
++
++	if (space > slot_space) {
++		VCHIQ_HEADER_T *header;
++		/* Fill the remaining space with padding */
++		WARN_ON(state->tx_data == NULL);
++		header = (VCHIQ_HEADER_T *)
++			(state->tx_data + (tx_pos & VCHIQ_SLOT_MASK));
++		header->msgid = VCHIQ_MSGID_PADDING;
++		header->size = slot_space - sizeof(VCHIQ_HEADER_T);
++
++		tx_pos += slot_space;
++	}
++
++	/* If necessary, get the next slot. */
++	if ((tx_pos & VCHIQ_SLOT_MASK) == 0) {
++		int slot_index;
++
++		/* If there is no free slot... */
++
++		if (down_trylock(&state->slot_available_event) != 0) {
++			/* ...wait for one. */
++
++			VCHIQ_STATS_INC(state, slot_stalls);
++
++			/* But first, flush through the last slot. */
++			state->local_tx_pos = tx_pos;
++			local->tx_pos = tx_pos;
++			remote_event_signal(&state->remote->trigger);
++
++			if (!is_blocking ||
++				(down_interruptible(
++				&state->slot_available_event) != 0))
++				return NULL; /* No space available */
++		}
++
++		BUG_ON(tx_pos ==
++			(state->slot_queue_available * VCHIQ_SLOT_SIZE));
++
++		slot_index = local->slot_queue[
++			SLOT_QUEUE_INDEX_FROM_POS(tx_pos) &
++			VCHIQ_SLOT_QUEUE_MASK];
++		state->tx_data =
++			(char *)SLOT_DATA_FROM_INDEX(state, slot_index);
++	}
++
++	state->local_tx_pos = tx_pos + space;
++
++	return (VCHIQ_HEADER_T *)(state->tx_data + (tx_pos & VCHIQ_SLOT_MASK));
++}
++
++/* Called by the recycle thread. */
++static void
++process_free_queue(VCHIQ_STATE_T *state)
++{
++	VCHIQ_SHARED_STATE_T *local = state->local;
++	BITSET_T service_found[BITSET_SIZE(VCHIQ_MAX_SERVICES)];
++	int slot_queue_available;
++
++	/* Use a read memory barrier to ensure that any state that may have
++	** been modified by another thread is not masked by stale prefetched
++	** values. */
++	rmb();
++
++	/* Find slots which have been freed by the other side, and return them
++	** to the available queue. */
++	slot_queue_available = state->slot_queue_available;
++
++	while (slot_queue_available != local->slot_queue_recycle) {
++		unsigned int pos;
++		int slot_index = local->slot_queue[slot_queue_available++ &
++			VCHIQ_SLOT_QUEUE_MASK];
++		char *data = (char *)SLOT_DATA_FROM_INDEX(state, slot_index);
++		int data_found = 0;
++
++		vchiq_log_trace(vchiq_core_log_level, "%d: pfq %d=%x %x %x",
++			state->id, slot_index, (unsigned int)data,
++			local->slot_queue_recycle, slot_queue_available);
++
++		/* Initialise the bitmask for services which have used this
++		** slot */
++		BITSET_ZERO(service_found);
++
++		pos = 0;
++
++		while (pos < VCHIQ_SLOT_SIZE) {
++			VCHIQ_HEADER_T *header =
++				(VCHIQ_HEADER_T *)(data + pos);
++			int msgid = header->msgid;
++			if (VCHIQ_MSG_TYPE(msgid) == VCHIQ_MSG_DATA) {
++				int port = VCHIQ_MSG_SRCPORT(msgid);
++				VCHIQ_SERVICE_QUOTA_T *service_quota =
++					&state->service_quotas[port];
++				int count;
++				spin_lock(&quota_spinlock);
++				count = service_quota->message_use_count;
++				if (count > 0)
++					service_quota->message_use_count =
++						count - 1;
++				spin_unlock(&quota_spinlock);
++
++				if (count == service_quota->message_quota)
++					/* Signal the service that it
++					** has dropped below its quota
++					*/
++					up(&service_quota->quota_event);
++				else if (count == 0) {
++					vchiq_log_error(vchiq_core_log_level,
++						"service %d "
++						"message_use_count=%d "
++						"(header %x, msgid %x, "
++						"header->msgid %x, "
++						"header->size %x)",
++						port,
++						service_quota->
++							message_use_count,
++						(unsigned int)header, msgid,
++						header->msgid,
++						header->size);
++					WARN(1, "invalid message use count\n");
++				}
++				if (!BITSET_IS_SET(service_found, port)) {
++					/* Set the found bit for this service */
++					BITSET_SET(service_found, port);
++
++					spin_lock(&quota_spinlock);
++					count = service_quota->slot_use_count;
++					if (count > 0)
++						service_quota->slot_use_count =
++							count - 1;
++					spin_unlock(&quota_spinlock);
++
++					if (count > 0) {
++						/* Signal the service in case
++						** it has dropped below its
++						** quota */
++						up(&service_quota->quota_event);
++						vchiq_log_trace(
++							vchiq_core_log_level,
++							"%d: pfq:%d %x@%x - "
++							"slot_use->%d",
++							state->id, port,
++							header->size,
++							(unsigned int)header,
++							count - 1);
++					} else {
++						vchiq_log_error(
++							vchiq_core_log_level,
++								"service %d "
++								"slot_use_count"
++								"=%d (header %x"
++								", msgid %x, "
++								"header->msgid"
++								" %x, header->"
++								"size %x)",
++							port, count,
++							(unsigned int)header,
++							msgid,
++							header->msgid,
++							header->size);
++						WARN(1, "bad slot use count\n");
++					}
++				}
++
++				data_found = 1;
++			}
++
++			pos += calc_stride(header->size);
++			if (pos > VCHIQ_SLOT_SIZE) {
++				vchiq_log_error(vchiq_core_log_level,
++					"pfq - pos %x: header %x, msgid %x, "
++					"header->msgid %x, header->size %x",
++					pos, (unsigned int)header, msgid,
++					header->msgid, header->size);
++				WARN(1, "invalid slot position\n");
++			}
++		}
++
++		if (data_found) {
++			int count;
++			spin_lock(&quota_spinlock);
++			count = state->data_use_count;
++			if (count > 0)
++				state->data_use_count =
++					count - 1;
++			spin_unlock(&quota_spinlock);
++			if (count == state->data_quota)
++				up(&state->data_quota_event);
++		}
++
++		state->slot_queue_available = slot_queue_available;
++		up(&state->slot_available_event);
++	}
++}
++
++/* Called by the slot handler and application threads */
++static VCHIQ_STATUS_T
++queue_message(VCHIQ_STATE_T *state, VCHIQ_SERVICE_T *service,
++	int msgid, const VCHIQ_ELEMENT_T *elements,
++	int count, int size, int is_blocking)
++{
++	VCHIQ_SHARED_STATE_T *local;
++	VCHIQ_SERVICE_QUOTA_T *service_quota = NULL;
++	VCHIQ_HEADER_T *header;
++	int type = VCHIQ_MSG_TYPE(msgid);
++
++	unsigned int stride;
++
++	local = state->local;
++
++	stride = calc_stride(size);
++
++	WARN_ON(!(stride <= VCHIQ_SLOT_SIZE));
++
++	if ((type != VCHIQ_MSG_RESUME) &&
++		(mutex_lock_interruptible(&state->slot_mutex) != 0))
++		return VCHIQ_RETRY;
++
++	if (type == VCHIQ_MSG_DATA) {
++		int tx_end_index;
++
++		BUG_ON(!service);
++
++		if (service->closing) {
++			/* The service has been closed */
++			mutex_unlock(&state->slot_mutex);
++			return VCHIQ_ERROR;
++		}
++
++		service_quota = &state->service_quotas[service->localport];
++
++		spin_lock(&quota_spinlock);
++
++		/* Ensure this service doesn't use more than its quota of
++		** messages or slots */
++		tx_end_index = SLOT_QUEUE_INDEX_FROM_POS(
++			state->local_tx_pos + stride - 1);
++
++		/* Ensure data messages don't use more than their quota of
++		** slots */
++		while ((tx_end_index != state->previous_data_index) &&
++			(state->data_use_count == state->data_quota)) {
++			VCHIQ_STATS_INC(state, data_stalls);
++			spin_unlock(&quota_spinlock);
++			mutex_unlock(&state->slot_mutex);
++
++			if (down_interruptible(&state->data_quota_event)
++				!= 0)
++				return VCHIQ_RETRY;
++
++			mutex_lock(&state->slot_mutex);
++			spin_lock(&quota_spinlock);
++			tx_end_index = SLOT_QUEUE_INDEX_FROM_POS(
++				state->local_tx_pos + stride - 1);
++			if ((tx_end_index == state->previous_data_index) ||
++				(state->data_use_count < state->data_quota)) {
++				/* Pass the signal on to other waiters */
++				up(&state->data_quota_event);
++				break;
++			}
++		}
++
++		while ((service_quota->message_use_count ==
++				service_quota->message_quota) ||
++			((tx_end_index != service_quota->previous_tx_index) &&
++			(service_quota->slot_use_count ==
++				service_quota->slot_quota))) {
++			spin_unlock(&quota_spinlock);
++			vchiq_log_trace(vchiq_core_log_level,
++				"%d: qm:%d %s,%x - quota stall "
++				"(msg %d, slot %d)",
++				state->id, service->localport,
++				msg_type_str(type), size,
++				service_quota->message_use_count,
++				service_quota->slot_use_count);
++			VCHIQ_SERVICE_STATS_INC(service, quota_stalls);
++			mutex_unlock(&state->slot_mutex);
++			if (down_interruptible(&service_quota->quota_event)
++				!= 0)
++				return VCHIQ_RETRY;
++			if (service->closing)
++				return VCHIQ_ERROR;
++			if (mutex_lock_interruptible(&state->slot_mutex) != 0)
++				return VCHIQ_RETRY;
++			if (service->srvstate != VCHIQ_SRVSTATE_OPEN) {
++				/* The service has been closed */
++				mutex_unlock(&state->slot_mutex);
++				return VCHIQ_ERROR;
++			}
++			spin_lock(&quota_spinlock);
++			tx_end_index = SLOT_QUEUE_INDEX_FROM_POS(
++				state->local_tx_pos + stride - 1);
++		}
++
++		spin_unlock(&quota_spinlock);
++	}
++
++	header = reserve_space(state, stride, is_blocking);
++
++	if (!header) {
++		if (service)
++			VCHIQ_SERVICE_STATS_INC(service, slot_stalls);
++		mutex_unlock(&state->slot_mutex);
++		return VCHIQ_RETRY;
++	}
++
++	if (type == VCHIQ_MSG_DATA) {
++		int i, pos;
++		int tx_end_index;
++		int slot_use_count;
++
++		vchiq_log_info(vchiq_core_log_level,
++			"%d: qm %s@%x,%x (%d->%d)",
++			state->id,
++			msg_type_str(VCHIQ_MSG_TYPE(msgid)),
++			(unsigned int)header, size,
++			VCHIQ_MSG_SRCPORT(msgid),
++			VCHIQ_MSG_DSTPORT(msgid));
++
++		BUG_ON(!service);
++
++		for (i = 0, pos = 0; i < (unsigned int)count;
++			pos += elements[i++].size)
++			if (elements[i].size) {
++				if (vchiq_copy_from_user
++					(header->data + pos, elements[i].data,
++					(size_t) elements[i].size) !=
++					VCHIQ_SUCCESS) {
++					mutex_unlock(&state->slot_mutex);
++					VCHIQ_SERVICE_STATS_INC(service,
++						error_count);
++					return VCHIQ_ERROR;
++				}
++				if (i == 0) {
++					if (vchiq_core_msg_log_level >=
++						VCHIQ_LOG_INFO)
++						vchiq_log_dump_mem("Sent", 0,
++							header->data + pos,
++							min(64u,
++							elements[0].size));
++				}
++			}
++
++		spin_lock(&quota_spinlock);
++		service_quota->message_use_count++;
++
++		tx_end_index =
++			SLOT_QUEUE_INDEX_FROM_POS(state->local_tx_pos - 1);
++
++		/* If this transmission can't fit in the last slot used by any
++		** service, the data_use_count must be increased. */
++		if (tx_end_index != state->previous_data_index) {
++			state->previous_data_index = tx_end_index;
++			state->data_use_count++;
++		}
++
++		/* If this isn't the same slot last used by this service,
++		** the service's slot_use_count must be increased. */
++		if (tx_end_index != service_quota->previous_tx_index) {
++			service_quota->previous_tx_index = tx_end_index;
++			slot_use_count = ++service_quota->slot_use_count;
++		} else {
++			slot_use_count = 0;
++		}
++
++		spin_unlock(&quota_spinlock);
++
++		if (slot_use_count)
++			vchiq_log_trace(vchiq_core_log_level,
++				"%d: qm:%d %s,%x - slot_use->%d (hdr %p)",
++				state->id, service->localport,
++				msg_type_str(VCHIQ_MSG_TYPE(msgid)), size,
++				slot_use_count, header);
++
++		VCHIQ_SERVICE_STATS_INC(service, ctrl_tx_count);
++		VCHIQ_SERVICE_STATS_ADD(service, ctrl_tx_bytes, size);
++	} else {
++		vchiq_log_info(vchiq_core_log_level,
++			"%d: qm %s@%x,%x (%d->%d)", state->id,
++			msg_type_str(VCHIQ_MSG_TYPE(msgid)),
++			(unsigned int)header, size,
++			VCHIQ_MSG_SRCPORT(msgid),
++			VCHIQ_MSG_DSTPORT(msgid));
++		if (size != 0) {
++			WARN_ON(!((count == 1) && (size == elements[0].size)));
++			memcpy(header->data, elements[0].data,
++				elements[0].size);
++		}
++		VCHIQ_STATS_INC(state, ctrl_tx_count);
++	}
++
++	header->msgid = msgid;
++	header->size = size;
++
++	{
++		int svc_fourcc;
++
++		svc_fourcc = service
++			? service->base.fourcc
++			: VCHIQ_MAKE_FOURCC('?', '?', '?', '?');
++
++		vchiq_log_info(vchiq_core_msg_log_level,
++			"Sent Msg %s(%u) to %c%c%c%c s:%u d:%d len:%d",
++			msg_type_str(VCHIQ_MSG_TYPE(msgid)),
++			VCHIQ_MSG_TYPE(msgid),
++			VCHIQ_FOURCC_AS_4CHARS(svc_fourcc),
++			VCHIQ_MSG_SRCPORT(msgid),
++			VCHIQ_MSG_DSTPORT(msgid),
++			size);
++	}
++
++	/* Make sure the new header is visible to the peer. */
++	wmb();
++
++	/* Make the new tx_pos visible to the peer. */
++	local->tx_pos = state->local_tx_pos;
++	wmb();
++
++	if (service && (type == VCHIQ_MSG_CLOSE))
++		vchiq_set_service_state(service, VCHIQ_SRVSTATE_CLOSESENT);
++
++	if (VCHIQ_MSG_TYPE(msgid) != VCHIQ_MSG_PAUSE)
++		mutex_unlock(&state->slot_mutex);
++
++	remote_event_signal(&state->remote->trigger);
++
++	return VCHIQ_SUCCESS;
++}
++
++/* Called by the slot handler and application threads */
++static VCHIQ_STATUS_T
++queue_message_sync(VCHIQ_STATE_T *state, VCHIQ_SERVICE_T *service,
++	int msgid, const VCHIQ_ELEMENT_T *elements,
++	int count, int size, int is_blocking)
++{
++	VCHIQ_SHARED_STATE_T *local;
++	VCHIQ_HEADER_T *header;
++
++	local = state->local;
++
++	if ((VCHIQ_MSG_TYPE(msgid) != VCHIQ_MSG_RESUME) &&
++		(mutex_lock_interruptible(&state->sync_mutex) != 0))
++		return VCHIQ_RETRY;
++
++	remote_event_wait(&local->sync_release);
++
++	rmb();
++
++	header = (VCHIQ_HEADER_T *)SLOT_DATA_FROM_INDEX(state,
++		local->slot_sync);
++
++	{
++		int oldmsgid = header->msgid;
++		if (oldmsgid != VCHIQ_MSGID_PADDING)
++			vchiq_log_error(vchiq_core_log_level,
++				"%d: qms - msgid %x, not PADDING",
++				state->id, oldmsgid);
++	}
++
++	if (service) {
++		int i, pos;
++
++		vchiq_log_info(vchiq_sync_log_level,
++			"%d: qms %s@%x,%x (%d->%d)", state->id,
++			msg_type_str(VCHIQ_MSG_TYPE(msgid)),
++			(unsigned int)header, size,
++			VCHIQ_MSG_SRCPORT(msgid),
++			VCHIQ_MSG_DSTPORT(msgid));
++
++		for (i = 0, pos = 0; i < (unsigned int)count;
++			pos += elements[i++].size)
++			if (elements[i].size) {
++				if (vchiq_copy_from_user
++					(header->data + pos, elements[i].data,
++					(size_t) elements[i].size) !=
++					VCHIQ_SUCCESS) {
++					mutex_unlock(&state->sync_mutex);
++					VCHIQ_SERVICE_STATS_INC(service,
++						error_count);
++					return VCHIQ_ERROR;
++				}
++				if (i == 0) {
++					if (vchiq_sync_log_level >=
++						VCHIQ_LOG_TRACE)
++						vchiq_log_dump_mem("Sent Sync",
++							0, header->data + pos,
++							min(64u,
++							elements[0].size));
++				}
++			}
++
++		VCHIQ_SERVICE_STATS_INC(service, ctrl_tx_count);
++		VCHIQ_SERVICE_STATS_ADD(service, ctrl_tx_bytes, size);
++	} else {
++		vchiq_log_info(vchiq_sync_log_level,
++			"%d: qms %s@%x,%x (%d->%d)", state->id,
++			msg_type_str(VCHIQ_MSG_TYPE(msgid)),
++			(unsigned int)header, size,
++			VCHIQ_MSG_SRCPORT(msgid),
++			VCHIQ_MSG_DSTPORT(msgid));
++		if (size != 0) {
++			WARN_ON(!((count == 1) && (size == elements[0].size)));
++			memcpy(header->data, elements[0].data,
++				elements[0].size);
++		}
++		VCHIQ_STATS_INC(state, ctrl_tx_count);
++	}
++
++	header->size = size;
++	header->msgid = msgid;
++
++	if (vchiq_sync_log_level >= VCHIQ_LOG_TRACE) {
++		int svc_fourcc;
++
++		svc_fourcc = service
++			? service->base.fourcc
++			: VCHIQ_MAKE_FOURCC('?', '?', '?', '?');
++
++		vchiq_log_trace(vchiq_sync_log_level,
++			"Sent Sync Msg %s(%u) to %c%c%c%c s:%u d:%d len:%d",
++			msg_type_str(VCHIQ_MSG_TYPE(msgid)),
++			VCHIQ_MSG_TYPE(msgid),
++			VCHIQ_FOURCC_AS_4CHARS(svc_fourcc),
++			VCHIQ_MSG_SRCPORT(msgid),
++			VCHIQ_MSG_DSTPORT(msgid),
++			size);
++	}
++
++	/* Make sure the new header is visible to the peer. */
++	wmb();
++
++	remote_event_signal(&state->remote->sync_trigger);
++
++	if (VCHIQ_MSG_TYPE(msgid) != VCHIQ_MSG_PAUSE)
++		mutex_unlock(&state->sync_mutex);
++
++	return VCHIQ_SUCCESS;
++}
++
++static inline void
++claim_slot(VCHIQ_SLOT_INFO_T *slot)
++{
++	slot->use_count++;
++}
++
++static void
++release_slot(VCHIQ_STATE_T *state, VCHIQ_SLOT_INFO_T *slot_info,
++	VCHIQ_HEADER_T *header, VCHIQ_SERVICE_T *service)
++{
++	int release_count;
++
++	mutex_lock(&state->recycle_mutex);
++
++	if (header) {
++		int msgid = header->msgid;
++		if (((msgid & VCHIQ_MSGID_CLAIMED) == 0) ||
++			(service && service->closing)) {
++			mutex_unlock(&state->recycle_mutex);
++			return;
++		}
++
++		/* Rewrite the message header to prevent a double
++		** release */
++		header->msgid = msgid & ~VCHIQ_MSGID_CLAIMED;
++	}
++
++	release_count = slot_info->release_count;
++	slot_info->release_count = ++release_count;
++
++	if (release_count == slot_info->use_count) {
++		int slot_queue_recycle;
++		/* Add to the freed queue */
++
++		/* A read barrier is necessary here to prevent speculative
++		** fetches of remote->slot_queue_recycle from overtaking the
++		** mutex. */
++		rmb();
++
++		slot_queue_recycle = state->remote->slot_queue_recycle;
++		state->remote->slot_queue[slot_queue_recycle &
++			VCHIQ_SLOT_QUEUE_MASK] =
++			SLOT_INDEX_FROM_INFO(state, slot_info);
++		state->remote->slot_queue_recycle = slot_queue_recycle + 1;
++		vchiq_log_info(vchiq_core_log_level,
++			"%d: release_slot %d - recycle->%x",
++			state->id, SLOT_INDEX_FROM_INFO(state, slot_info),
++			state->remote->slot_queue_recycle);
++
++		/* A write barrier is necessary, but remote_event_signal
++		** contains one. */
++		remote_event_signal(&state->remote->recycle);
++	}
++
++	mutex_unlock(&state->recycle_mutex);
++}
++
++/* Called by the slot handler - don't hold the bulk mutex */
++static VCHIQ_STATUS_T
++notify_bulks(VCHIQ_SERVICE_T *service, VCHIQ_BULK_QUEUE_T *queue,
++	int retry_poll)
++{
++	VCHIQ_STATUS_T status = VCHIQ_SUCCESS;
++
++	vchiq_log_trace(vchiq_core_log_level,
++		"%d: nb:%d %cx - p=%x rn=%x r=%x",
++		service->state->id, service->localport,
++		(queue == &service->bulk_tx) ? 't' : 'r',
++		queue->process, queue->remote_notify, queue->remove);
++
++	if (service->state->is_master) {
++		while (queue->remote_notify != queue->process) {
++			VCHIQ_BULK_T *bulk =
++				&queue->bulks[BULK_INDEX(queue->remote_notify)];
++			int msgtype = (bulk->dir == VCHIQ_BULK_TRANSMIT) ?
++				VCHIQ_MSG_BULK_RX_DONE : VCHIQ_MSG_BULK_TX_DONE;
++			int msgid = VCHIQ_MAKE_MSG(msgtype, service->localport,
++				service->remoteport);
++			VCHIQ_ELEMENT_T element = { &bulk->actual, 4 };
++			/* Only reply to non-dummy bulk requests */
++			if (bulk->remote_data) {
++				status = queue_message(service->state, NULL,
++					msgid, &element, 1, 4, 0);
++				if (status != VCHIQ_SUCCESS)
++					break;
++			}
++			queue->remote_notify++;
++		}
++	} else {
++		queue->remote_notify = queue->process;
++	}
++
++	if (status == VCHIQ_SUCCESS) {
++		while (queue->remove != queue->remote_notify) {
++			VCHIQ_BULK_T *bulk =
++				&queue->bulks[BULK_INDEX(queue->remove)];
++
++			/* Only generate callbacks for non-dummy bulk
++			** requests, and non-terminated services */
++			if (bulk->data && service->instance) {
++				if (bulk->actual != VCHIQ_BULK_ACTUAL_ABORTED) {
++					if (bulk->dir == VCHIQ_BULK_TRANSMIT) {
++						VCHIQ_SERVICE_STATS_INC(service,
++							bulk_tx_count);
++						VCHIQ_SERVICE_STATS_ADD(service,
++							bulk_tx_bytes,
++							bulk->actual);
++					} else {
++						VCHIQ_SERVICE_STATS_INC(service,
++							bulk_rx_count);
++						VCHIQ_SERVICE_STATS_ADD(service,
++							bulk_rx_bytes,
++							bulk->actual);
++					}
++				} else {
++					VCHIQ_SERVICE_STATS_INC(service,
++						bulk_aborted_count);
++				}
++				if (bulk->mode == VCHIQ_BULK_MODE_BLOCKING) {
++					struct bulk_waiter *waiter;
++					spin_lock(&bulk_waiter_spinlock);
++					waiter = bulk->userdata;
++					if (waiter) {
++						waiter->actual = bulk->actual;
++						up(&waiter->event);
++					}
++					spin_unlock(&bulk_waiter_spinlock);
++				} else if (bulk->mode ==
++					VCHIQ_BULK_MODE_CALLBACK) {
++					VCHIQ_REASON_T reason = (bulk->dir ==
++						VCHIQ_BULK_TRANSMIT) ?
++						((bulk->actual ==
++						VCHIQ_BULK_ACTUAL_ABORTED) ?
++						VCHIQ_BULK_TRANSMIT_ABORTED :
++						VCHIQ_BULK_TRANSMIT_DONE) :
++						((bulk->actual ==
++						VCHIQ_BULK_ACTUAL_ABORTED) ?
++						VCHIQ_BULK_RECEIVE_ABORTED :
++						VCHIQ_BULK_RECEIVE_DONE);
++					status = make_service_callback(service,
++						reason,	NULL, bulk->userdata);
++					if (status == VCHIQ_RETRY)
++						break;
++				}
++			}
++
++			queue->remove++;
++			up(&service->bulk_remove_event);
++		}
++		if (!retry_poll)
++			status = VCHIQ_SUCCESS;
++	}
++
++	if (status == VCHIQ_RETRY)
++		request_poll(service->state, service,
++			(queue == &service->bulk_tx) ?
++			VCHIQ_POLL_TXNOTIFY : VCHIQ_POLL_RXNOTIFY);
++
++	return status;
++}
++
++/* Called by the slot handler thread */
++static void
++poll_services(VCHIQ_STATE_T *state)
++{
++	int group, i;
++
++	for (group = 0; group < BITSET_SIZE(state->unused_service); group++) {
++		uint32_t flags;
++		flags = atomic_xchg(&state->poll_services[group], 0);
++		for (i = 0; flags; i++) {
++			if (flags & (1 << i)) {
++				VCHIQ_SERVICE_T *service =
++					find_service_by_port(state,
++						(group<<5) + i);
++				uint32_t service_flags;
++				flags &= ~(1 << i);
++				if (!service)
++					continue;
++				service_flags =
++					atomic_xchg(&service->poll_flags, 0);
++				if (service_flags &
++					(1 << VCHIQ_POLL_REMOVE)) {
++					vchiq_log_info(vchiq_core_log_level,
++						"%d: ps - remove %d<->%d",
++						state->id, service->localport,
++						service->remoteport);
++
++					/* Make it look like a client, because
++					   it must be removed and not left in
++					   the LISTENING state. */
++					service->public_fourcc =
++						VCHIQ_FOURCC_INVALID;
++
++					if (vchiq_close_service_internal(
++						service, 0/*!close_recvd*/) !=
++						VCHIQ_SUCCESS)
++						request_poll(state, service,
++							VCHIQ_POLL_REMOVE);
++				} else if (service_flags &
++					(1 << VCHIQ_POLL_TERMINATE)) {
++					vchiq_log_info(vchiq_core_log_level,
++						"%d: ps - terminate %d<->%d",
++						state->id, service->localport,
++						service->remoteport);
++					if (vchiq_close_service_internal(
++						service, 0/*!close_recvd*/) !=
++						VCHIQ_SUCCESS)
++						request_poll(state, service,
++							VCHIQ_POLL_TERMINATE);
++				}
++				if (service_flags & (1 << VCHIQ_POLL_TXNOTIFY))
++					notify_bulks(service,
++						&service->bulk_tx,
++						1/*retry_poll*/);
++				if (service_flags & (1 << VCHIQ_POLL_RXNOTIFY))
++					notify_bulks(service,
++						&service->bulk_rx,
++						1/*retry_poll*/);
++				unlock_service(service);
++			}
++		}
++	}
++}
++
++/* Called by the slot handler or application threads, holding the bulk mutex. */
++static int
++resolve_bulks(VCHIQ_SERVICE_T *service, VCHIQ_BULK_QUEUE_T *queue)
++{
++	VCHIQ_STATE_T *state = service->state;
++	int resolved = 0;
++	int rc;
++
++	while ((queue->process != queue->local_insert) &&
++		(queue->process != queue->remote_insert)) {
++		VCHIQ_BULK_T *bulk = &queue->bulks[BULK_INDEX(queue->process)];
++
++		vchiq_log_trace(vchiq_core_log_level,
++			"%d: rb:%d %cx - li=%x ri=%x p=%x",
++			state->id, service->localport,
++			(queue == &service->bulk_tx) ? 't' : 'r',
++			queue->local_insert, queue->remote_insert,
++			queue->process);
++
++		WARN_ON(!((int)(queue->local_insert - queue->process) > 0));
++		WARN_ON(!((int)(queue->remote_insert - queue->process) > 0));
++
++		rc = mutex_lock_interruptible(&state->bulk_transfer_mutex);
++		if (rc != 0)
++			break;
++
++		vchiq_transfer_bulk(bulk);
++		mutex_unlock(&state->bulk_transfer_mutex);
++
++		if (vchiq_core_msg_log_level >= VCHIQ_LOG_INFO) {
++			const char *header = (queue == &service->bulk_tx) ?
++				"Send Bulk to" : "Recv Bulk from";
++			if (bulk->actual != VCHIQ_BULK_ACTUAL_ABORTED)
++				vchiq_log_info(vchiq_core_msg_log_level,
++					"%s %c%c%c%c d:%d len:%d %x<->%x",
++					header,
++					VCHIQ_FOURCC_AS_4CHARS(
++						service->base.fourcc),
++					service->remoteport,
++					bulk->size,
++					(unsigned int)bulk->data,
++					(unsigned int)bulk->remote_data);
++			else
++				vchiq_log_info(vchiq_core_msg_log_level,
++					"%s %c%c%c%c d:%d ABORTED - tx len:%d,"
++					" rx len:%d %x<->%x",
++					header,
++					VCHIQ_FOURCC_AS_4CHARS(
++						service->base.fourcc),
++					service->remoteport,
++					bulk->size,
++					bulk->remote_size,
++					(unsigned int)bulk->data,
++					(unsigned int)bulk->remote_data);
++		}
++
++		vchiq_complete_bulk(bulk);
++		queue->process++;
++		resolved++;
++	}
++	return resolved;
++}
++
++/* Called with the bulk_mutex held */
++static void
++abort_outstanding_bulks(VCHIQ_SERVICE_T *service, VCHIQ_BULK_QUEUE_T *queue)
++{
++	int is_tx = (queue == &service->bulk_tx);
++	vchiq_log_trace(vchiq_core_log_level,
++		"%d: aob:%d %cx - li=%x ri=%x p=%x",
++		service->state->id, service->localport, is_tx ? 't' : 'r',
++		queue->local_insert, queue->remote_insert, queue->process);
++
++	WARN_ON(!((int)(queue->local_insert - queue->process) >= 0));
++	WARN_ON(!((int)(queue->remote_insert - queue->process) >= 0));
++
++	while ((queue->process != queue->local_insert) ||
++		(queue->process != queue->remote_insert)) {
++		VCHIQ_BULK_T *bulk = &queue->bulks[BULK_INDEX(queue->process)];
++
++		if (queue->process == queue->remote_insert) {
++			/* fabricate a matching dummy bulk */
++			bulk->remote_data = NULL;
++			bulk->remote_size = 0;
++			queue->remote_insert++;
++		}
++
++		if (queue->process != queue->local_insert) {
++			vchiq_complete_bulk(bulk);
++
++			vchiq_log_info(vchiq_core_msg_log_level,
++				"%s %c%c%c%c d:%d ABORTED - tx len:%d, "
++				"rx len:%d",
++				is_tx ? "Send Bulk to" : "Recv Bulk from",
++				VCHIQ_FOURCC_AS_4CHARS(service->base.fourcc),
++				service->remoteport,
++				bulk->size,
++				bulk->remote_size);
++		} else {
++			/* fabricate a matching dummy bulk */
++			bulk->data = NULL;
++			bulk->size = 0;
++			bulk->actual = VCHIQ_BULK_ACTUAL_ABORTED;
++			bulk->dir = is_tx ? VCHIQ_BULK_TRANSMIT :
++				VCHIQ_BULK_RECEIVE;
++			queue->local_insert++;
++		}
++
++		queue->process++;
++	}
++}
++
++/* Called from the slot handler thread */
++static void
++pause_bulks(VCHIQ_STATE_T *state)
++{
++	if (unlikely(atomic_inc_return(&pause_bulks_count) != 1)) {
++		WARN_ON_ONCE(1);
++		atomic_set(&pause_bulks_count, 1);
++		return;
++	}
++
++	/* Block bulk transfers from all services */
++	mutex_lock(&state->bulk_transfer_mutex);
++}
++
++/* Called from the slot handler thread */
++static void
++resume_bulks(VCHIQ_STATE_T *state)
++{
++	int i;
++	if (unlikely(atomic_dec_return(&pause_bulks_count) != 0)) {
++		WARN_ON_ONCE(1);
++		atomic_set(&pause_bulks_count, 0);
++		return;
++	}
++
++	/* Allow bulk transfers from all services */
++	mutex_unlock(&state->bulk_transfer_mutex);
++
++	if (state->deferred_bulks == 0)
++		return;
++
++	/* Deal with any bulks which had to be deferred due to being in
++	 * paused state.  Don't try to match up to number of deferred bulks
++	 * in case we've had something come and close the service in the
++	 * interim - just process all bulk queues for all services */
++	vchiq_log_info(vchiq_core_log_level, "%s: processing %d deferred bulks",
++		__func__, state->deferred_bulks);
++
++	for (i = 0; i < state->unused_service; i++) {
++		VCHIQ_SERVICE_T *service = state->services[i];
++		int resolved_rx = 0;
++		int resolved_tx = 0;
++		if (!service || (service->srvstate != VCHIQ_SRVSTATE_OPEN))
++			continue;
++
++		mutex_lock(&service->bulk_mutex);
++		resolved_rx = resolve_bulks(service, &service->bulk_rx);
++		resolved_tx = resolve_bulks(service, &service->bulk_tx);
++		mutex_unlock(&service->bulk_mutex);
++		if (resolved_rx)
++			notify_bulks(service, &service->bulk_rx, 1);
++		if (resolved_tx)
++			notify_bulks(service, &service->bulk_tx, 1);
++	}
++	state->deferred_bulks = 0;
++}
++
++static int
++parse_open(VCHIQ_STATE_T *state, VCHIQ_HEADER_T *header)
++{
++	VCHIQ_SERVICE_T *service = NULL;
++	int msgid, size;
++	int type;
++	unsigned int localport, remoteport;
++
++	msgid = header->msgid;
++	size = header->size;
++	type = VCHIQ_MSG_TYPE(msgid);
++	localport = VCHIQ_MSG_DSTPORT(msgid);
++	remoteport = VCHIQ_MSG_SRCPORT(msgid);
++	if (size >= sizeof(struct vchiq_open_payload)) {
++		const struct vchiq_open_payload *payload =
++			(struct vchiq_open_payload *)header->data;
++		unsigned int fourcc;
++
++		fourcc = payload->fourcc;
++		vchiq_log_info(vchiq_core_log_level,
++			"%d: prs OPEN@%x (%d->'%c%c%c%c')",
++			state->id, (unsigned int)header,
++			localport,
++			VCHIQ_FOURCC_AS_4CHARS(fourcc));
++
++		service = get_listening_service(state, fourcc);
++
++		if (service) {
++			/* A matching service exists */
++			short version = payload->version;
++			short version_min = payload->version_min;
++			if ((service->version < version_min) ||
++				(version < service->version_min)) {
++				/* Version mismatch */
++				vchiq_loud_error_header();
++				vchiq_loud_error("%d: service %d (%c%c%c%c) "
++					"version mismatch - local (%d, min %d)"
++					" vs. remote (%d, min %d)",
++					state->id, service->localport,
++					VCHIQ_FOURCC_AS_4CHARS(fourcc),
++					service->version, service->version_min,
++					version, version_min);
++				vchiq_loud_error_footer();
++				unlock_service(service);
++				service = NULL;
++				goto fail_open;
++			}
++			service->peer_version = version;
++
++			if (service->srvstate == VCHIQ_SRVSTATE_LISTENING) {
++				struct vchiq_openack_payload ack_payload = {
++					service->version
++				};
++				VCHIQ_ELEMENT_T body = {
++					&ack_payload,
++					sizeof(ack_payload)
++				};
++
++				/* Acknowledge the OPEN */
++				if (service->sync) {
++					if (queue_message_sync(state, NULL,
++						VCHIQ_MAKE_MSG(
++							VCHIQ_MSG_OPENACK,
++							service->localport,
++							remoteport),
++						&body, 1, sizeof(ack_payload),
++						0) == VCHIQ_RETRY)
++						goto bail_not_ready;
++				} else {
++					if (queue_message(state, NULL,
++						VCHIQ_MAKE_MSG(
++							VCHIQ_MSG_OPENACK,
++							service->localport,
++							remoteport),
++						&body, 1, sizeof(ack_payload),
++						0) == VCHIQ_RETRY)
++						goto bail_not_ready;
++				}
++
++				/* The service is now open */
++				vchiq_set_service_state(service,
++					service->sync ? VCHIQ_SRVSTATE_OPENSYNC
++					: VCHIQ_SRVSTATE_OPEN);
++			}
++
++			service->remoteport = remoteport;
++			service->client_id = ((int *)header->data)[1];
++			if (make_service_callback(service, VCHIQ_SERVICE_OPENED,
++				NULL, NULL) == VCHIQ_RETRY) {
++				/* Bail out if not ready */
++				service->remoteport = VCHIQ_PORT_FREE;
++				goto bail_not_ready;
++			}
++
++			/* Success - the message has been dealt with */
++			unlock_service(service);
++			return 1;
++		}
++	}
++
++fail_open:
++	/* No available service, or an invalid request - send a CLOSE */
++	if (queue_message(state, NULL,
++		VCHIQ_MAKE_MSG(VCHIQ_MSG_CLOSE, 0, VCHIQ_MSG_SRCPORT(msgid)),
++		NULL, 0, 0, 0) == VCHIQ_RETRY)
++		goto bail_not_ready;
++
++	return 1;
++
++bail_not_ready:
++	if (service)
++		unlock_service(service);
++
++	return 0;
++}
++
++/* Called by the slot handler thread */
++static void
++parse_rx_slots(VCHIQ_STATE_T *state)
++{
++	VCHIQ_SHARED_STATE_T *remote = state->remote;
++	VCHIQ_SERVICE_T *service = NULL;
++	int tx_pos;
++	DEBUG_INITIALISE(state->local)
++
++	tx_pos = remote->tx_pos;
++
++	while (state->rx_pos != tx_pos) {
++		VCHIQ_HEADER_T *header;
++		int msgid, size;
++		int type;
++		unsigned int localport, remoteport;
++
++		DEBUG_TRACE(PARSE_LINE);
++		if (!state->rx_data) {
++			int rx_index;
++			WARN_ON(!((state->rx_pos & VCHIQ_SLOT_MASK) == 0));
++			rx_index = remote->slot_queue[
++				SLOT_QUEUE_INDEX_FROM_POS(state->rx_pos) &
++				VCHIQ_SLOT_QUEUE_MASK];
++			state->rx_data = (char *)SLOT_DATA_FROM_INDEX(state,
++				rx_index);
++			state->rx_info = SLOT_INFO_FROM_INDEX(state, rx_index);
++
++			/* Initialise use_count to one, and increment
++			** release_count at the end of the slot to avoid
++			** releasing the slot prematurely. */
++			state->rx_info->use_count = 1;
++			state->rx_info->release_count = 0;
++		}
++
++		header = (VCHIQ_HEADER_T *)(state->rx_data +
++			(state->rx_pos & VCHIQ_SLOT_MASK));
++		DEBUG_VALUE(PARSE_HEADER, (int)header);
++		msgid = header->msgid;
++		DEBUG_VALUE(PARSE_MSGID, msgid);
++		size = header->size;
++		type = VCHIQ_MSG_TYPE(msgid);
++		localport = VCHIQ_MSG_DSTPORT(msgid);
++		remoteport = VCHIQ_MSG_SRCPORT(msgid);
++
++		if (type != VCHIQ_MSG_DATA)
++			VCHIQ_STATS_INC(state, ctrl_rx_count);
++
++		switch (type) {
++		case VCHIQ_MSG_OPENACK:
++		case VCHIQ_MSG_CLOSE:
++		case VCHIQ_MSG_DATA:
++		case VCHIQ_MSG_BULK_RX:
++		case VCHIQ_MSG_BULK_TX:
++		case VCHIQ_MSG_BULK_RX_DONE:
++		case VCHIQ_MSG_BULK_TX_DONE:
++			service = find_service_by_port(state, localport);
++			if ((!service || service->remoteport != remoteport) &&
++				(localport == 0) &&
++				(type == VCHIQ_MSG_CLOSE)) {
++				/* This could be a CLOSE from a client which
++				   hadn't yet received the OPENACK - look for
++				   the connected service */
++				if (service)
++					unlock_service(service);
++				service = get_connected_service(state,
++					remoteport);
++				if (service)
++					vchiq_log_warning(vchiq_core_log_level,
++						"%d: prs %s@%x (%d->%d) - "
++						"found connected service %d",
++						state->id, msg_type_str(type),
++						(unsigned int)header,
++						remoteport, localport,
++						service->localport);
++			}
++
++			if (!service) {
++				vchiq_log_error(vchiq_core_log_level,
++					"%d: prs %s@%x (%d->%d) - "
++					"invalid/closed service %d",
++					state->id, msg_type_str(type),
++					(unsigned int)header,
++					remoteport, localport, localport);
++				goto skip_message;
++			}
++			break;
++		default:
++			break;
++		}
++
++		if (vchiq_core_msg_log_level >= VCHIQ_LOG_INFO) {
++			int svc_fourcc;
++
++			svc_fourcc = service
++				? service->base.fourcc
++				: VCHIQ_MAKE_FOURCC('?', '?', '?', '?');
++			vchiq_log_info(vchiq_core_msg_log_level,
++				"Rcvd Msg %s(%u) from %c%c%c%c s:%d d:%d "
++				"len:%d",
++				msg_type_str(type), type,
++				VCHIQ_FOURCC_AS_4CHARS(svc_fourcc),
++				remoteport, localport, size);
++			if (size > 0)
++				vchiq_log_dump_mem("Rcvd", 0, header->data,
++					min(64, size));
++		}
++
++		if (((unsigned int)header & VCHIQ_SLOT_MASK) + calc_stride(size)
++			> VCHIQ_SLOT_SIZE) {
++			vchiq_log_error(vchiq_core_log_level,
++				"header %x (msgid %x) - size %x too big for "
++				"slot",
++				(unsigned int)header, (unsigned int)msgid,
++				(unsigned int)size);
++			WARN(1, "oversized for slot\n");
++		}
++
++		switch (type) {
++		case VCHIQ_MSG_OPEN:
++			WARN_ON(!(VCHIQ_MSG_DSTPORT(msgid) == 0));
++			if (!parse_open(state, header))
++				goto bail_not_ready;
++			break;
++		case VCHIQ_MSG_OPENACK:
++			if (size >= sizeof(struct vchiq_openack_payload)) {
++				const struct vchiq_openack_payload *payload =
++					(struct vchiq_openack_payload *)
++					header->data;
++				service->peer_version = payload->version;
++			}
++			vchiq_log_info(vchiq_core_log_level,
++				"%d: prs OPENACK@%x,%x (%d->%d) v:%d",
++				state->id, (unsigned int)header, size,
++				remoteport, localport, service->peer_version);
++			if (service->srvstate ==
++				VCHIQ_SRVSTATE_OPENING) {
++				service->remoteport = remoteport;
++				vchiq_set_service_state(service,
++					VCHIQ_SRVSTATE_OPEN);
++				up(&service->remove_event);
++			} else
++				vchiq_log_error(vchiq_core_log_level,
++					"OPENACK received in state %s",
++					srvstate_names[service->srvstate]);
++			break;
++		case VCHIQ_MSG_CLOSE:
++			WARN_ON(size != 0); /* There should be no data */
++
++			vchiq_log_info(vchiq_core_log_level,
++				"%d: prs CLOSE@%x (%d->%d)",
++				state->id, (unsigned int)header,
++				remoteport, localport);
++
++			mark_service_closing_internal(service, 1);
++
++			if (vchiq_close_service_internal(service,
++				1/*close_recvd*/) == VCHIQ_RETRY)
++				goto bail_not_ready;
++
++			vchiq_log_info(vchiq_core_log_level,
++				"Close Service %c%c%c%c s:%u d:%d",
++				VCHIQ_FOURCC_AS_4CHARS(service->base.fourcc),
++				service->localport,
++				service->remoteport);
++			break;
++		case VCHIQ_MSG_DATA:
++			vchiq_log_trace(vchiq_core_log_level,
++				"%d: prs DATA@%x,%x (%d->%d)",
++				state->id, (unsigned int)header, size,
++				remoteport, localport);
++
++			if ((service->remoteport == remoteport)
++				&& (service->srvstate ==
++				VCHIQ_SRVSTATE_OPEN)) {
++				header->msgid = msgid | VCHIQ_MSGID_CLAIMED;
++				claim_slot(state->rx_info);
++				DEBUG_TRACE(PARSE_LINE);
++				if (make_service_callback(service,
++					VCHIQ_MESSAGE_AVAILABLE, header,
++					NULL) == VCHIQ_RETRY) {
++					DEBUG_TRACE(PARSE_LINE);
++					goto bail_not_ready;
++				}
++				VCHIQ_SERVICE_STATS_INC(service, ctrl_rx_count);
++				VCHIQ_SERVICE_STATS_ADD(service, ctrl_rx_bytes,
++					size);
++			} else {
++				VCHIQ_STATS_INC(state, error_count);
++			}
++			break;
++		case VCHIQ_MSG_CONNECT:
++			vchiq_log_info(vchiq_core_log_level,
++				"%d: prs CONNECT@%x",
++				state->id, (unsigned int)header);
++			up(&state->connect);
++			break;
++		case VCHIQ_MSG_BULK_RX:
++		case VCHIQ_MSG_BULK_TX: {
++			VCHIQ_BULK_QUEUE_T *queue;
++			WARN_ON(!state->is_master);
++			queue = (type == VCHIQ_MSG_BULK_RX) ?
++				&service->bulk_tx : &service->bulk_rx;
++			if ((service->remoteport == remoteport)
++				&& (service->srvstate ==
++				VCHIQ_SRVSTATE_OPEN)) {
++				VCHIQ_BULK_T *bulk;
++				int resolved = 0;
++
++				DEBUG_TRACE(PARSE_LINE);
++				if (mutex_lock_interruptible(
++					&service->bulk_mutex) != 0) {
++					DEBUG_TRACE(PARSE_LINE);
++					goto bail_not_ready;
++				}
++
++				WARN_ON(!(queue->remote_insert < queue->remove +
++					VCHIQ_NUM_SERVICE_BULKS));
++				bulk = &queue->bulks[
++					BULK_INDEX(queue->remote_insert)];
++				bulk->remote_data =
++					(void *)((int *)header->data)[0];
++				bulk->remote_size = ((int *)header->data)[1];
++				wmb();
++
++				vchiq_log_info(vchiq_core_log_level,
++					"%d: prs %s@%x (%d->%d) %x@%x",
++					state->id, msg_type_str(type),
++					(unsigned int)header,
++					remoteport, localport,
++					bulk->remote_size,
++					(unsigned int)bulk->remote_data);
++
++				queue->remote_insert++;
++
++				if (atomic_read(&pause_bulks_count)) {
++					state->deferred_bulks++;
++					vchiq_log_info(vchiq_core_log_level,
++						"%s: deferring bulk (%d)",
++						__func__,
++						state->deferred_bulks);
++					if (state->conn_state !=
++						VCHIQ_CONNSTATE_PAUSE_SENT)
++						vchiq_log_error(
++							vchiq_core_log_level,
++							"%s: bulks paused in "
++							"unexpected state %s",
++							__func__,
++							conn_state_names[
++							state->conn_state]);
++				} else if (state->conn_state ==
++					VCHIQ_CONNSTATE_CONNECTED) {
++					DEBUG_TRACE(PARSE_LINE);
++					resolved = resolve_bulks(service,
++						queue);
++				}
++
++				mutex_unlock(&service->bulk_mutex);
++				if (resolved)
++					notify_bulks(service, queue,
++						1/*retry_poll*/);
++			}
++		} break;
++		case VCHIQ_MSG_BULK_RX_DONE:
++		case VCHIQ_MSG_BULK_TX_DONE:
++			WARN_ON(state->is_master);
++			if ((service->remoteport == remoteport)
++				&& (service->srvstate !=
++				VCHIQ_SRVSTATE_FREE)) {
++				VCHIQ_BULK_QUEUE_T *queue;
++				VCHIQ_BULK_T *bulk;
++
++				queue = (type == VCHIQ_MSG_BULK_RX_DONE) ?
++					&service->bulk_rx : &service->bulk_tx;
++
++				DEBUG_TRACE(PARSE_LINE);
++				if (mutex_lock_interruptible(
++					&service->bulk_mutex) != 0) {
++					DEBUG_TRACE(PARSE_LINE);
++					goto bail_not_ready;
++				}
++				if ((int)(queue->remote_insert -
++					queue->local_insert) >= 0) {
++					vchiq_log_error(vchiq_core_log_level,
++						"%d: prs %s@%x (%d->%d) "
++						"unexpected (ri=%d,li=%d)",
++						state->id, msg_type_str(type),
++						(unsigned int)header,
++						remoteport, localport,
++						queue->remote_insert,
++						queue->local_insert);
++					mutex_unlock(&service->bulk_mutex);
++					break;
++				}
++
++				BUG_ON(queue->process == queue->local_insert);
++				BUG_ON(queue->process != queue->remote_insert);
++
++				bulk = &queue->bulks[
++					BULK_INDEX(queue->remote_insert)];
++				bulk->actual = *(int *)header->data;
++				queue->remote_insert++;
++
++				vchiq_log_info(vchiq_core_log_level,
++					"%d: prs %s@%x (%d->%d) %x@%x",
++					state->id, msg_type_str(type),
++					(unsigned int)header,
++					remoteport, localport,
++					bulk->actual, (unsigned int)bulk->data);
++
++				vchiq_log_trace(vchiq_core_log_level,
++					"%d: prs:%d %cx li=%x ri=%x p=%x",
++					state->id, localport,
++					(type == VCHIQ_MSG_BULK_RX_DONE) ?
++						'r' : 't',
++					queue->local_insert,
++					queue->remote_insert, queue->process);
++
++				DEBUG_TRACE(PARSE_LINE);
++				WARN_ON(queue->process == queue->local_insert);
++				vchiq_complete_bulk(bulk);
++				queue->process++;
++				mutex_unlock(&service->bulk_mutex);
++				DEBUG_TRACE(PARSE_LINE);
++				notify_bulks(service, queue, 1/*retry_poll*/);
++				DEBUG_TRACE(PARSE_LINE);
++			}
++			break;
++		case VCHIQ_MSG_PADDING:
++			vchiq_log_trace(vchiq_core_log_level,
++				"%d: prs PADDING@%x,%x",
++				state->id, (unsigned int)header, size);
++			break;
++		case VCHIQ_MSG_PAUSE:
++			/* If initiated, signal the application thread */
++			vchiq_log_trace(vchiq_core_log_level,
++				"%d: prs PAUSE@%x,%x",
++				state->id, (unsigned int)header, size);
++			if (state->conn_state == VCHIQ_CONNSTATE_PAUSED) {
++				vchiq_log_error(vchiq_core_log_level,
++					"%d: PAUSE received in state PAUSED",
++					state->id);
++				break;
++			}
++			if (state->conn_state != VCHIQ_CONNSTATE_PAUSE_SENT) {
++				/* Send a PAUSE in response */
++				if (queue_message(state, NULL,
++					VCHIQ_MAKE_MSG(VCHIQ_MSG_PAUSE, 0, 0),
++					NULL, 0, 0, 0) == VCHIQ_RETRY)
++					goto bail_not_ready;
++				if (state->is_master)
++					pause_bulks(state);
++			}
++			/* At this point slot_mutex is held */
++			vchiq_set_conn_state(state, VCHIQ_CONNSTATE_PAUSED);
++			vchiq_platform_paused(state);
++			break;
++		case VCHIQ_MSG_RESUME:
++			vchiq_log_trace(vchiq_core_log_level,
++				"%d: prs RESUME@%x,%x",
++				state->id, (unsigned int)header, size);
++			/* Release the slot mutex */
++			mutex_unlock(&state->slot_mutex);
++			if (state->is_master)
++				resume_bulks(state);
++			vchiq_set_conn_state(state, VCHIQ_CONNSTATE_CONNECTED);
++			vchiq_platform_resumed(state);
++			break;
++
++		case VCHIQ_MSG_REMOTE_USE:
++			vchiq_on_remote_use(state);
++			break;
++		case VCHIQ_MSG_REMOTE_RELEASE:
++			vchiq_on_remote_release(state);
++			break;
++		case VCHIQ_MSG_REMOTE_USE_ACTIVE:
++			vchiq_on_remote_use_active(state);
++			break;
++
++		default:
++			vchiq_log_error(vchiq_core_log_level,
++				"%d: prs invalid msgid %x@%x,%x",
++				state->id, msgid, (unsigned int)header, size);
++			WARN(1, "invalid message\n");
++			break;
++		}
++
++skip_message:
++		if (service) {
++			unlock_service(service);
++			service = NULL;
++		}
++
++		state->rx_pos += calc_stride(size);
++
++		DEBUG_TRACE(PARSE_LINE);
++		/* Perform some housekeeping when the end of the slot is
++		** reached. */
++		if ((state->rx_pos & VCHIQ_SLOT_MASK) == 0) {
++			/* Remove the extra reference count. */
++			release_slot(state, state->rx_info, NULL, NULL);
++			state->rx_data = NULL;
++		}
++	}
++
++bail_not_ready:
++	if (service)
++		unlock_service(service);
++}
++
++/* Called by the slot handler thread */
++static int
++slot_handler_func(void *v)
++{
++	VCHIQ_STATE_T *state = (VCHIQ_STATE_T *) v;
++	VCHIQ_SHARED_STATE_T *local = state->local;
++	DEBUG_INITIALISE(local)
++
++	while (1) {
++		DEBUG_COUNT(SLOT_HANDLER_COUNT);
++		DEBUG_TRACE(SLOT_HANDLER_LINE);
++		remote_event_wait(&local->trigger);
++
++		rmb();
++
++		DEBUG_TRACE(SLOT_HANDLER_LINE);
++		if (state->poll_needed) {
++			/* Check if we need to suspend - may change our
++			 * conn_state */
++			vchiq_platform_check_suspend(state);
++
++			state->poll_needed = 0;
++
++			/* Handle service polling and other rare conditions here
++			** out of the mainline code */
++			switch (state->conn_state) {
++			case VCHIQ_CONNSTATE_CONNECTED:
++				/* Poll the services as requested */
++				poll_services(state);
++				break;
++
++			case VCHIQ_CONNSTATE_PAUSING:
++				if (state->is_master)
++					pause_bulks(state);
++				if (queue_message(state, NULL,
++					VCHIQ_MAKE_MSG(VCHIQ_MSG_PAUSE, 0, 0),
++					NULL, 0, 0, 0) != VCHIQ_RETRY) {
++					vchiq_set_conn_state(state,
++						VCHIQ_CONNSTATE_PAUSE_SENT);
++				} else {
++					if (state->is_master)
++						resume_bulks(state);
++					/* Retry later */
++					state->poll_needed = 1;
++				}
++				break;
++
++			case VCHIQ_CONNSTATE_PAUSED:
++				vchiq_platform_resume(state);
++				break;
++
++			case VCHIQ_CONNSTATE_RESUMING:
++				if (queue_message(state, NULL,
++					VCHIQ_MAKE_MSG(VCHIQ_MSG_RESUME, 0, 0),
++					NULL, 0, 0, 0) != VCHIQ_RETRY) {
++					if (state->is_master)
++						resume_bulks(state);
++					vchiq_set_conn_state(state,
++						VCHIQ_CONNSTATE_CONNECTED);
++					vchiq_platform_resumed(state);
++				} else {
++					/* This should really be impossible,
++					** since the PAUSE should have flushed
++					** through outstanding messages. */
++					vchiq_log_error(vchiq_core_log_level,
++						"Failed to send RESUME "
++						"message");
++					BUG();
++				}
++				break;
++
++			case VCHIQ_CONNSTATE_PAUSE_TIMEOUT:
++			case VCHIQ_CONNSTATE_RESUME_TIMEOUT:
++				vchiq_platform_handle_timeout(state);
++				break;
++			default:
++				break;
++			}
++
++
++		}
++
++		DEBUG_TRACE(SLOT_HANDLER_LINE);
++		parse_rx_slots(state);
++	}
++	return 0;
++}
++
++
++/* Called by the recycle thread */
++static int
++recycle_func(void *v)
++{
++	VCHIQ_STATE_T *state = (VCHIQ_STATE_T *) v;
++	VCHIQ_SHARED_STATE_T *local = state->local;
++
++	while (1) {
++		remote_event_wait(&local->recycle);
++
++		process_free_queue(state);
++	}
++	return 0;
++}
++
++
++/* Called by the sync thread */
++static int
++sync_func(void *v)
++{
++	VCHIQ_STATE_T *state = (VCHIQ_STATE_T *) v;
++	VCHIQ_SHARED_STATE_T *local = state->local;
++	VCHIQ_HEADER_T *header = (VCHIQ_HEADER_T *)SLOT_DATA_FROM_INDEX(state,
++		state->remote->slot_sync);
++
++	while (1) {
++		VCHIQ_SERVICE_T *service;
++		int msgid, size;
++		int type;
++		unsigned int localport, remoteport;
++
++		remote_event_wait(&local->sync_trigger);
++
++		rmb();
++
++		msgid = header->msgid;
++		size = header->size;
++		type = VCHIQ_MSG_TYPE(msgid);
++		localport = VCHIQ_MSG_DSTPORT(msgid);
++		remoteport = VCHIQ_MSG_SRCPORT(msgid);
++
++		service = find_service_by_port(state, localport);
++
++		if (!service) {
++			vchiq_log_error(vchiq_sync_log_level,
++				"%d: sf %s@%x (%d->%d) - "
++				"invalid/closed service %d",
++				state->id, msg_type_str(type),
++				(unsigned int)header,
++				remoteport, localport, localport);
++			release_message_sync(state, header);
++			continue;
++		}
++
++		if (vchiq_sync_log_level >= VCHIQ_LOG_TRACE) {
++			int svc_fourcc;
++
++			svc_fourcc = service
++				? service->base.fourcc
++				: VCHIQ_MAKE_FOURCC('?', '?', '?', '?');
++			vchiq_log_trace(vchiq_sync_log_level,
++				"Rcvd Msg %s from %c%c%c%c s:%d d:%d len:%d",
++				msg_type_str(type),
++				VCHIQ_FOURCC_AS_4CHARS(svc_fourcc),
++				remoteport, localport, size);
++			if (size > 0)
++				vchiq_log_dump_mem("Rcvd", 0, header->data,
++					min(64, size));
++		}
++
++		switch (type) {
++		case VCHIQ_MSG_OPENACK:
++			if (size >= sizeof(struct vchiq_openack_payload)) {
++				const struct vchiq_openack_payload *payload =
++					(struct vchiq_openack_payload *)
++					header->data;
++				service->peer_version = payload->version;
++			}
++			vchiq_log_info(vchiq_sync_log_level,
++				"%d: sf OPENACK@%x,%x (%d->%d) v:%d",
++				state->id, (unsigned int)header, size,
++				remoteport, localport, service->peer_version);
++			if (service->srvstate == VCHIQ_SRVSTATE_OPENING) {
++				service->remoteport = remoteport;
++				vchiq_set_service_state(service,
++					VCHIQ_SRVSTATE_OPENSYNC);
++				up(&service->remove_event);
++			}
++			release_message_sync(state, header);
++			break;
++
++		case VCHIQ_MSG_DATA:
++			vchiq_log_trace(vchiq_sync_log_level,
++				"%d: sf DATA@%x,%x (%d->%d)",
++				state->id, (unsigned int)header, size,
++				remoteport, localport);
++
++			if ((service->remoteport == remoteport) &&
++				(service->srvstate ==
++				VCHIQ_SRVSTATE_OPENSYNC)) {
++				if (make_service_callback(service,
++					VCHIQ_MESSAGE_AVAILABLE, header,
++					NULL) == VCHIQ_RETRY)
++					vchiq_log_error(vchiq_sync_log_level,
++						"synchronous callback to "
++						"service %d returns "
++						"VCHIQ_RETRY",
++						localport);
++			}
++			break;
++
++		default:
++			vchiq_log_error(vchiq_sync_log_level,
++				"%d: sf unexpected msgid %x@%x,%x",
++				state->id, msgid, (unsigned int)header, size);
++			release_message_sync(state, header);
++			break;
++		}
++
++		unlock_service(service);
++	}
++
++	return 0;
++}
++
++
++static void
++init_bulk_queue(VCHIQ_BULK_QUEUE_T *queue)
++{
++	queue->local_insert = 0;
++	queue->remote_insert = 0;
++	queue->process = 0;
++	queue->remote_notify = 0;
++	queue->remove = 0;
++}
++
++
++inline const char *
++get_conn_state_name(VCHIQ_CONNSTATE_T conn_state)
++{
++	return conn_state_names[conn_state];
++}
++
++
++VCHIQ_SLOT_ZERO_T *
++vchiq_init_slots(void *mem_base, int mem_size)
++{
++	int mem_align = (VCHIQ_SLOT_SIZE - (int)mem_base) & VCHIQ_SLOT_MASK;
++	VCHIQ_SLOT_ZERO_T *slot_zero =
++		(VCHIQ_SLOT_ZERO_T *)((char *)mem_base + mem_align);
++	int num_slots = (mem_size - mem_align)/VCHIQ_SLOT_SIZE;
++	int first_data_slot = VCHIQ_SLOT_ZERO_SLOTS;
++
++	/* Ensure there is enough memory to run an absolutely minimum system */
++	num_slots -= first_data_slot;
++
++	if (num_slots < 4) {
++		vchiq_log_error(vchiq_core_log_level,
++			"vchiq_init_slots - insufficient memory %x bytes",
++			mem_size);
++		return NULL;
++	}
++
++	memset(slot_zero, 0, sizeof(VCHIQ_SLOT_ZERO_T));
++
++	slot_zero->magic = VCHIQ_MAGIC;
++	slot_zero->version = VCHIQ_VERSION;
++	slot_zero->version_min = VCHIQ_VERSION_MIN;
++	slot_zero->slot_zero_size = sizeof(VCHIQ_SLOT_ZERO_T);
++	slot_zero->slot_size = VCHIQ_SLOT_SIZE;
++	slot_zero->max_slots = VCHIQ_MAX_SLOTS;
++	slot_zero->max_slots_per_side = VCHIQ_MAX_SLOTS_PER_SIDE;
++
++	slot_zero->master.slot_sync = first_data_slot;
++	slot_zero->master.slot_first = first_data_slot + 1;
++	slot_zero->master.slot_last = first_data_slot + (num_slots/2) - 1;
++	slot_zero->slave.slot_sync = first_data_slot + (num_slots/2);
++	slot_zero->slave.slot_first = first_data_slot + (num_slots/2) + 1;
++	slot_zero->slave.slot_last = first_data_slot + num_slots - 1;
++
++	return slot_zero;
++}
++
++VCHIQ_STATUS_T
++vchiq_init_state(VCHIQ_STATE_T *state, VCHIQ_SLOT_ZERO_T *slot_zero,
++		 int is_master)
++{
++	VCHIQ_SHARED_STATE_T *local;
++	VCHIQ_SHARED_STATE_T *remote;
++	VCHIQ_STATUS_T status;
++	char threadname[10];
++	static int id;
++	int i;
++
++	vchiq_log_warning(vchiq_core_log_level,
++		"%s: slot_zero = 0x%08lx, is_master = %d",
++		__func__, (unsigned long)slot_zero, is_master);
++
++	/* Check the input configuration */
++
++	if (slot_zero->magic != VCHIQ_MAGIC) {
++		vchiq_loud_error_header();
++		vchiq_loud_error("Invalid VCHIQ magic value found.");
++		vchiq_loud_error("slot_zero=%x: magic=%x (expected %x)",
++			(unsigned int)slot_zero, slot_zero->magic, VCHIQ_MAGIC);
++		vchiq_loud_error_footer();
++		return VCHIQ_ERROR;
++	}
++
++	if (slot_zero->version < VCHIQ_VERSION_MIN) {
++		vchiq_loud_error_header();
++		vchiq_loud_error("Incompatible VCHIQ versions found.");
++		vchiq_loud_error("slot_zero=%x: VideoCore version=%d "
++			"(minimum %d)",
++			(unsigned int)slot_zero, slot_zero->version,
++			VCHIQ_VERSION_MIN);
++		vchiq_loud_error("Restart with a newer VideoCore image.");
++		vchiq_loud_error_footer();
++		return VCHIQ_ERROR;
++	}
++
++	if (VCHIQ_VERSION < slot_zero->version_min) {
++		vchiq_loud_error_header();
++		vchiq_loud_error("Incompatible VCHIQ versions found.");
++		vchiq_loud_error("slot_zero=%x: version=%d (VideoCore "
++			"minimum %d)",
++			(unsigned int)slot_zero, VCHIQ_VERSION,
++			slot_zero->version_min);
++		vchiq_loud_error("Restart with a newer kernel.");
++		vchiq_loud_error_footer();
++		return VCHIQ_ERROR;
++	}
++
++	if ((slot_zero->slot_zero_size != sizeof(VCHIQ_SLOT_ZERO_T)) ||
++		 (slot_zero->slot_size != VCHIQ_SLOT_SIZE) ||
++		 (slot_zero->max_slots != VCHIQ_MAX_SLOTS) ||
++		 (slot_zero->max_slots_per_side != VCHIQ_MAX_SLOTS_PER_SIDE)) {
++		vchiq_loud_error_header();
++		if (slot_zero->slot_zero_size != sizeof(VCHIQ_SLOT_ZERO_T))
++			vchiq_loud_error("slot_zero=%x: slot_zero_size=%x "
++				"(expected %x)",
++				(unsigned int)slot_zero,
++				slot_zero->slot_zero_size,
++				sizeof(VCHIQ_SLOT_ZERO_T));
++		if (slot_zero->slot_size != VCHIQ_SLOT_SIZE)
++			vchiq_loud_error("slot_zero=%x: slot_size=%d "
++				"(expected %d",
++				(unsigned int)slot_zero, slot_zero->slot_size,
++				VCHIQ_SLOT_SIZE);
++		if (slot_zero->max_slots != VCHIQ_MAX_SLOTS)
++			vchiq_loud_error("slot_zero=%x: max_slots=%d "
++				"(expected %d)",
++				(unsigned int)slot_zero, slot_zero->max_slots,
++				VCHIQ_MAX_SLOTS);
++		if (slot_zero->max_slots_per_side != VCHIQ_MAX_SLOTS_PER_SIDE)
++			vchiq_loud_error("slot_zero=%x: max_slots_per_side=%d "
++				"(expected %d)",
++				(unsigned int)slot_zero,
++				slot_zero->max_slots_per_side,
++				VCHIQ_MAX_SLOTS_PER_SIDE);
++		vchiq_loud_error_footer();
++		return VCHIQ_ERROR;
++	}
++
++	if (is_master) {
++		local = &slot_zero->master;
++		remote = &slot_zero->slave;
++	} else {
++		local = &slot_zero->slave;
++		remote = &slot_zero->master;
++	}
++
++	if (local->initialised) {
++		vchiq_loud_error_header();
++		if (remote->initialised)
++			vchiq_loud_error("local state has already been "
++				"initialised");
++		else
++			vchiq_loud_error("master/slave mismatch - two %ss",
++				is_master ? "master" : "slave");
++		vchiq_loud_error_footer();
++		return VCHIQ_ERROR;
++	}
++
++	memset(state, 0, sizeof(VCHIQ_STATE_T));
++
++	state->id = id++;
++	state->is_master = is_master;
++
++	/*
++		initialize shared state pointers
++	 */
++
++	state->local = local;
++	state->remote = remote;
++	state->slot_data = (VCHIQ_SLOT_T *)slot_zero;
++
++	/*
++		initialize events and mutexes
++	 */
++
++	sema_init(&state->connect, 0);
++	mutex_init(&state->mutex);
++	sema_init(&state->trigger_event, 0);
++	sema_init(&state->recycle_event, 0);
++	sema_init(&state->sync_trigger_event, 0);
++	sema_init(&state->sync_release_event, 0);
++
++	mutex_init(&state->slot_mutex);
++	mutex_init(&state->recycle_mutex);
++	mutex_init(&state->sync_mutex);
++	mutex_init(&state->bulk_transfer_mutex);
++
++	sema_init(&state->slot_available_event, 0);
++	sema_init(&state->slot_remove_event, 0);
++	sema_init(&state->data_quota_event, 0);
++
++	state->slot_queue_available = 0;
++
++	for (i = 0; i < VCHIQ_MAX_SERVICES; i++) {
++		VCHIQ_SERVICE_QUOTA_T *service_quota =
++			&state->service_quotas[i];
++		sema_init(&service_quota->quota_event, 0);
++	}
++
++	for (i = local->slot_first; i <= local->slot_last; i++) {
++		local->slot_queue[state->slot_queue_available++] = i;
++		up(&state->slot_available_event);
++	}
++
++	state->default_slot_quota = state->slot_queue_available/2;
++	state->default_message_quota =
++		min((unsigned short)(state->default_slot_quota * 256),
++		(unsigned short)~0);
++
++	state->previous_data_index = -1;
++	state->data_use_count = 0;
++	state->data_quota = state->slot_queue_available - 1;
++
++	local->trigger.event = &state->trigger_event;
++	remote_event_create(&local->trigger);
++	local->tx_pos = 0;
++
++	local->recycle.event = &state->recycle_event;
++	remote_event_create(&local->recycle);
++	local->slot_queue_recycle = state->slot_queue_available;
++
++	local->sync_trigger.event = &state->sync_trigger_event;
++	remote_event_create(&local->sync_trigger);
++
++	local->sync_release.event = &state->sync_release_event;
++	remote_event_create(&local->sync_release);
++
++	/* At start-of-day, the slot is empty and available */
++	((VCHIQ_HEADER_T *)SLOT_DATA_FROM_INDEX(state, local->slot_sync))->msgid
++		= VCHIQ_MSGID_PADDING;
++	remote_event_signal_local(&local->sync_release);
++
++	local->debug[DEBUG_ENTRIES] = DEBUG_MAX;
++
++	status = vchiq_platform_init_state(state);
++
++	/*
++		bring up slot handler thread
++	 */
++	snprintf(threadname, sizeof(threadname), "VCHIQ-%d", state->id);
++	state->slot_handler_thread = kthread_create(&slot_handler_func,
++		(void *)state,
++		threadname);
++
++	if (state->slot_handler_thread == NULL) {
++		vchiq_loud_error_header();
++		vchiq_loud_error("couldn't create thread %s", threadname);
++		vchiq_loud_error_footer();
++		return VCHIQ_ERROR;
++	}
++	set_user_nice(state->slot_handler_thread, -19);
++	wake_up_process(state->slot_handler_thread);
++
++	snprintf(threadname, sizeof(threadname), "VCHIQr-%d", state->id);
++	state->recycle_thread = kthread_create(&recycle_func,
++		(void *)state,
++		threadname);
++	if (state->recycle_thread == NULL) {
++		vchiq_loud_error_header();
++		vchiq_loud_error("couldn't create thread %s", threadname);
++		vchiq_loud_error_footer();
++		return VCHIQ_ERROR;
++	}
++	set_user_nice(state->recycle_thread, -19);
++	wake_up_process(state->recycle_thread);
++
++	snprintf(threadname, sizeof(threadname), "VCHIQs-%d", state->id);
++	state->sync_thread = kthread_create(&sync_func,
++		(void *)state,
++		threadname);
++	if (state->sync_thread == NULL) {
++		vchiq_loud_error_header();
++		vchiq_loud_error("couldn't create thread %s", threadname);
++		vchiq_loud_error_footer();
++		return VCHIQ_ERROR;
++	}
++	set_user_nice(state->sync_thread, -20);
++	wake_up_process(state->sync_thread);
++
++	BUG_ON(state->id >= VCHIQ_MAX_STATES);
++	vchiq_states[state->id] = state;
++
++	/* Indicate readiness to the other side */
++	local->initialised = 1;
++
++	return status;
++}
++
++/* Called from application thread when a client or server service is created. */
++VCHIQ_SERVICE_T *
++vchiq_add_service_internal(VCHIQ_STATE_T *state,
++	const VCHIQ_SERVICE_PARAMS_T *params, int srvstate,
++	VCHIQ_INSTANCE_T instance, VCHIQ_USERDATA_TERM_T userdata_term)
++{
++	VCHIQ_SERVICE_T *service;
++
++	service = kmalloc(sizeof(VCHIQ_SERVICE_T), GFP_KERNEL);
++	if (service) {
++		service->base.fourcc   = params->fourcc;
++		service->base.callback = params->callback;
++		service->base.userdata = params->userdata;
++		service->handle        = VCHIQ_SERVICE_HANDLE_INVALID;
++		service->ref_count     = 1;
++		service->srvstate      = VCHIQ_SRVSTATE_FREE;
++		service->userdata_term = userdata_term;
++		service->localport     = VCHIQ_PORT_FREE;
++		service->remoteport    = VCHIQ_PORT_FREE;
++
++		service->public_fourcc = (srvstate == VCHIQ_SRVSTATE_OPENING) ?
++			VCHIQ_FOURCC_INVALID : params->fourcc;
++		service->client_id     = 0;
++		service->auto_close    = 1;
++		service->sync          = 0;
++		service->closing       = 0;
++		atomic_set(&service->poll_flags, 0);
++		service->version       = params->version;
++		service->version_min   = params->version_min;
++		service->state         = state;
++		service->instance      = instance;
++		service->service_use_count = 0;
++		init_bulk_queue(&service->bulk_tx);
++		init_bulk_queue(&service->bulk_rx);
++		sema_init(&service->remove_event, 0);
++		sema_init(&service->bulk_remove_event, 0);
++		mutex_init(&service->bulk_mutex);
++		memset(&service->stats, 0, sizeof(service->stats));
++	} else {
++		vchiq_log_error(vchiq_core_log_level,
++			"Out of memory");
++	}
++
++	if (service) {
++		VCHIQ_SERVICE_T **pservice = NULL;
++		int i;
++
++		/* Although it is perfectly possible to use service_spinlock
++		** to protect the creation of services, it is overkill as it
++		** disables interrupts while the array is searched.
++		** The only danger is of another thread trying to create a
++		** service - service deletion is safe.
++		** Therefore it is preferable to use state->mutex which,
++		** although slower to claim, doesn't block interrupts while
++		** it is held.
++		*/
++
++		mutex_lock(&state->mutex);
++
++		/* Prepare to use a previously unused service */
++		if (state->unused_service < VCHIQ_MAX_SERVICES)
++			pservice = &state->services[state->unused_service];
++
++		if (srvstate == VCHIQ_SRVSTATE_OPENING) {
++			for (i = 0; i < state->unused_service; i++) {
++				VCHIQ_SERVICE_T *srv = state->services[i];
++				if (!srv) {
++					pservice = &state->services[i];
++					break;
++				}
++			}
++		} else {
++			for (i = (state->unused_service - 1); i >= 0; i--) {
++				VCHIQ_SERVICE_T *srv = state->services[i];
++				if (!srv)
++					pservice = &state->services[i];
++				else if ((srv->public_fourcc == params->fourcc)
++					&& ((srv->instance != instance) ||
++					(srv->base.callback !=
++					params->callback))) {
++					/* There is another server using this
++					** fourcc which doesn't match. */
++					pservice = NULL;
++					break;
++				}
++			}
++		}
++
++		if (pservice) {
++			service->localport = (pservice - state->services);
++			if (!handle_seq)
++				handle_seq = VCHIQ_MAX_STATES *
++					 VCHIQ_MAX_SERVICES;
++			service->handle = handle_seq |
++				(state->id * VCHIQ_MAX_SERVICES) |
++				service->localport;
++			handle_seq += VCHIQ_MAX_STATES * VCHIQ_MAX_SERVICES;
++			*pservice = service;
++			if (pservice == &state->services[state->unused_service])
++				state->unused_service++;
++		}
++
++		mutex_unlock(&state->mutex);
++
++		if (!pservice) {
++			kfree(service);
++			service = NULL;
++		}
++	}
++
++	if (service) {
++		VCHIQ_SERVICE_QUOTA_T *service_quota =
++			&state->service_quotas[service->localport];
++		service_quota->slot_quota = state->default_slot_quota;
++		service_quota->message_quota = state->default_message_quota;
++		if (service_quota->slot_use_count == 0)
++			service_quota->previous_tx_index =
++				SLOT_QUEUE_INDEX_FROM_POS(state->local_tx_pos)
++				- 1;
++
++		/* Bring this service online */
++		vchiq_set_service_state(service, srvstate);
++
++		vchiq_log_info(vchiq_core_msg_log_level,
++			"%s Service %c%c%c%c SrcPort:%d",
++			(srvstate == VCHIQ_SRVSTATE_OPENING)
++			? "Open" : "Add",
++			VCHIQ_FOURCC_AS_4CHARS(params->fourcc),
++			service->localport);
++	}
++
++	/* Don't unlock the service - leave it with a ref_count of 1. */
++
++	return service;
++}
++
++VCHIQ_STATUS_T
++vchiq_open_service_internal(VCHIQ_SERVICE_T *service, int client_id)
++{
++	struct vchiq_open_payload payload = {
++		service->base.fourcc,
++		client_id,
++		service->version,
++		service->version_min
++	};
++	VCHIQ_ELEMENT_T body = { &payload, sizeof(payload) };
++	VCHIQ_STATUS_T status = VCHIQ_SUCCESS;
++
++	service->client_id = client_id;
++	vchiq_use_service_internal(service);
++	status = queue_message(service->state, NULL,
++		VCHIQ_MAKE_MSG(VCHIQ_MSG_OPEN, service->localport, 0),
++		&body, 1, sizeof(payload), 1);
++	if (status == VCHIQ_SUCCESS) {
++		if (down_interruptible(&service->remove_event) != 0) {
++			status = VCHIQ_RETRY;
++			vchiq_release_service_internal(service);
++		} else if ((service->srvstate != VCHIQ_SRVSTATE_OPEN) &&
++			(service->srvstate != VCHIQ_SRVSTATE_OPENSYNC)) {
++			if (service->srvstate != VCHIQ_SRVSTATE_CLOSEWAIT)
++				vchiq_log_error(vchiq_core_log_level,
++					"%d: osi - srvstate = %s (ref %d)",
++					service->state->id,
++					srvstate_names[service->srvstate],
++					service->ref_count);
++			status = VCHIQ_ERROR;
++			VCHIQ_SERVICE_STATS_INC(service, error_count);
++			vchiq_release_service_internal(service);
++		}
++	}
++	return status;
++}
++
++static void
++release_service_messages(VCHIQ_SERVICE_T *service)
++{
++	VCHIQ_STATE_T *state = service->state;
++	int slot_last = state->remote->slot_last;
++	int i;
++
++	/* Release any claimed messages */
++	for (i = state->remote->slot_first; i <= slot_last; i++) {
++		VCHIQ_SLOT_INFO_T *slot_info =
++			SLOT_INFO_FROM_INDEX(state, i);
++		if (slot_info->release_count != slot_info->use_count) {
++			char *data =
++				(char *)SLOT_DATA_FROM_INDEX(state, i);
++			unsigned int pos, end;
++
++			end = VCHIQ_SLOT_SIZE;
++			if (data == state->rx_data)
++				/* This buffer is still being read from - stop
++				** at the current read position */
++				end = state->rx_pos & VCHIQ_SLOT_MASK;
++
++			pos = 0;
++
++			while (pos < end) {
++				VCHIQ_HEADER_T *header =
++					(VCHIQ_HEADER_T *)(data + pos);
++				int msgid = header->msgid;
++				int port = VCHIQ_MSG_DSTPORT(msgid);
++				if ((port == service->localport) &&
++					(msgid & VCHIQ_MSGID_CLAIMED)) {
++					vchiq_log_info(vchiq_core_log_level,
++						"  fsi - hdr %x",
++						(unsigned int)header);
++					release_slot(state, slot_info, header,
++						NULL);
++				}
++				pos += calc_stride(header->size);
++				if (pos > VCHIQ_SLOT_SIZE) {
++					vchiq_log_error(vchiq_core_log_level,
++						"fsi - pos %x: header %x, "
++						"msgid %x, header->msgid %x, "
++						"header->size %x",
++						pos, (unsigned int)header,
++						msgid, header->msgid,
++						header->size);
++					WARN(1, "invalid slot position\n");
++				}
++			}
++		}
++	}
++}
++
++static int
++do_abort_bulks(VCHIQ_SERVICE_T *service)
++{
++	VCHIQ_STATUS_T status;
++
++	/* Abort any outstanding bulk transfers */
++	if (mutex_lock_interruptible(&service->bulk_mutex) != 0)
++		return 0;
++	abort_outstanding_bulks(service, &service->bulk_tx);
++	abort_outstanding_bulks(service, &service->bulk_rx);
++	mutex_unlock(&service->bulk_mutex);
++
++	status = notify_bulks(service, &service->bulk_tx, 0/*!retry_poll*/);
++	if (status == VCHIQ_SUCCESS)
++		status = notify_bulks(service, &service->bulk_rx,
++			0/*!retry_poll*/);
++	return (status == VCHIQ_SUCCESS);
++}
++
++static VCHIQ_STATUS_T
++close_service_complete(VCHIQ_SERVICE_T *service, int failstate)
++{
++	VCHIQ_STATUS_T status;
++	int is_server = (service->public_fourcc != VCHIQ_FOURCC_INVALID);
++	int newstate;
++
++	switch (service->srvstate) {
++	case VCHIQ_SRVSTATE_OPEN:
++	case VCHIQ_SRVSTATE_CLOSESENT:
++	case VCHIQ_SRVSTATE_CLOSERECVD:
++		if (is_server) {
++			if (service->auto_close) {
++				service->client_id = 0;
++				service->remoteport = VCHIQ_PORT_FREE;
++				newstate = VCHIQ_SRVSTATE_LISTENING;
++			} else
++				newstate = VCHIQ_SRVSTATE_CLOSEWAIT;
++		} else
++			newstate = VCHIQ_SRVSTATE_CLOSED;
++		vchiq_set_service_state(service, newstate);
++		break;
++	case VCHIQ_SRVSTATE_LISTENING:
++		break;
++	default:
++		vchiq_log_error(vchiq_core_log_level,
++			"close_service_complete(%x) called in state %s",
++			service->handle, srvstate_names[service->srvstate]);
++		WARN(1, "close_service_complete in unexpected state\n");
++		return VCHIQ_ERROR;
++	}
++
++	status = make_service_callback(service,
++		VCHIQ_SERVICE_CLOSED, NULL, NULL);
++
++	if (status != VCHIQ_RETRY) {
++		int uc = service->service_use_count;
++		int i;
++		/* Complete the close process */
++		for (i = 0; i < uc; i++)
++			/* cater for cases where close is forced and the
++			** client may not close all it's handles */
++			vchiq_release_service_internal(service);
++
++		service->client_id = 0;
++		service->remoteport = VCHIQ_PORT_FREE;
++
++		if (service->srvstate == VCHIQ_SRVSTATE_CLOSED)
++			vchiq_free_service_internal(service);
++		else if (service->srvstate != VCHIQ_SRVSTATE_CLOSEWAIT) {
++			if (is_server)
++				service->closing = 0;
++
++			up(&service->remove_event);
++		}
++	} else
++		vchiq_set_service_state(service, failstate);
++
++	return status;
++}
++
++/* Called by the slot handler */
++VCHIQ_STATUS_T
++vchiq_close_service_internal(VCHIQ_SERVICE_T *service, int close_recvd)
++{
++	VCHIQ_STATE_T *state = service->state;
++	VCHIQ_STATUS_T status = VCHIQ_SUCCESS;
++	int is_server = (service->public_fourcc != VCHIQ_FOURCC_INVALID);
++
++	vchiq_log_info(vchiq_core_log_level, "%d: csi:%d,%d (%s)",
++		service->state->id, service->localport, close_recvd,
++		srvstate_names[service->srvstate]);
++
++	switch (service->srvstate) {
++	case VCHIQ_SRVSTATE_CLOSED:
++	case VCHIQ_SRVSTATE_HIDDEN:
++	case VCHIQ_SRVSTATE_LISTENING:
++	case VCHIQ_SRVSTATE_CLOSEWAIT:
++		if (close_recvd)
++			vchiq_log_error(vchiq_core_log_level,
++				"vchiq_close_service_internal(1) called "
++				"in state %s",
++				srvstate_names[service->srvstate]);
++		else if (is_server) {
++			if (service->srvstate == VCHIQ_SRVSTATE_LISTENING) {
++				status = VCHIQ_ERROR;
++			} else {
++				service->client_id = 0;
++				service->remoteport = VCHIQ_PORT_FREE;
++				if (service->srvstate ==
++					VCHIQ_SRVSTATE_CLOSEWAIT)
++					vchiq_set_service_state(service,
++						VCHIQ_SRVSTATE_LISTENING);
++			}
++			up(&service->remove_event);
++		} else
++			vchiq_free_service_internal(service);
++		break;
++	case VCHIQ_SRVSTATE_OPENING:
++		if (close_recvd) {
++			/* The open was rejected - tell the user */
++			vchiq_set_service_state(service,
++				VCHIQ_SRVSTATE_CLOSEWAIT);
++			up(&service->remove_event);
++		} else {
++			/* Shutdown mid-open - let the other side know */
++			status = queue_message(state, service,
++				VCHIQ_MAKE_MSG
++				(VCHIQ_MSG_CLOSE,
++				service->localport,
++				VCHIQ_MSG_DSTPORT(service->remoteport)),
++				NULL, 0, 0, 0);
++		}
++		break;
++
++	case VCHIQ_SRVSTATE_OPENSYNC:
++		mutex_lock(&state->sync_mutex);
++		/* Drop through */
++
++	case VCHIQ_SRVSTATE_OPEN:
++		if (state->is_master || close_recvd) {
++			if (!do_abort_bulks(service))
++				status = VCHIQ_RETRY;
++		}
++
++		release_service_messages(service);
++
++		if (status == VCHIQ_SUCCESS)
++			status = queue_message(state, service,
++				VCHIQ_MAKE_MSG
++				(VCHIQ_MSG_CLOSE,
++				service->localport,
++				VCHIQ_MSG_DSTPORT(service->remoteport)),
++				NULL, 0, 0, 0);
++
++		if (status == VCHIQ_SUCCESS) {
++			if (!close_recvd)
++				break;
++		} else if (service->srvstate == VCHIQ_SRVSTATE_OPENSYNC) {
++			mutex_unlock(&state->sync_mutex);
++			break;
++		} else
++			break;
++
++		status = close_service_complete(service,
++				VCHIQ_SRVSTATE_CLOSERECVD);
++		break;
++
++	case VCHIQ_SRVSTATE_CLOSESENT:
++		if (!close_recvd)
++			/* This happens when a process is killed mid-close */
++			break;
++
++		if (!state->is_master) {
++			if (!do_abort_bulks(service)) {
++				status = VCHIQ_RETRY;
++				break;
++			}
++		}
++
++		if (status == VCHIQ_SUCCESS)
++			status = close_service_complete(service,
++				VCHIQ_SRVSTATE_CLOSERECVD);
++		break;
++
++	case VCHIQ_SRVSTATE_CLOSERECVD:
++		if (!close_recvd && is_server)
++			/* Force into LISTENING mode */
++			vchiq_set_service_state(service,
++				VCHIQ_SRVSTATE_LISTENING);
++		status = close_service_complete(service,
++			VCHIQ_SRVSTATE_CLOSERECVD);
++		break;
++
++	default:
++		vchiq_log_error(vchiq_core_log_level,
++			"vchiq_close_service_internal(%d) called in state %s",
++			close_recvd, srvstate_names[service->srvstate]);
++		break;
++	}
++
++	return status;
++}
++
++/* Called from the application process upon process death */
++void
++vchiq_terminate_service_internal(VCHIQ_SERVICE_T *service)
++{
++	VCHIQ_STATE_T *state = service->state;
++
++	vchiq_log_info(vchiq_core_log_level, "%d: tsi - (%d<->%d)",
++		state->id, service->localport, service->remoteport);
++
++	mark_service_closing(service);
++
++	/* Mark the service for removal by the slot handler */
++	request_poll(state, service, VCHIQ_POLL_REMOVE);
++}
++
++/* Called from the slot handler */
++void
++vchiq_free_service_internal(VCHIQ_SERVICE_T *service)
++{
++	VCHIQ_STATE_T *state = service->state;
++
++	vchiq_log_info(vchiq_core_log_level, "%d: fsi - (%d)",
++		state->id, service->localport);
++
++	switch (service->srvstate) {
++	case VCHIQ_SRVSTATE_OPENING:
++	case VCHIQ_SRVSTATE_CLOSED:
++	case VCHIQ_SRVSTATE_HIDDEN:
++	case VCHIQ_SRVSTATE_LISTENING:
++	case VCHIQ_SRVSTATE_CLOSEWAIT:
++		break;
++	default:
++		vchiq_log_error(vchiq_core_log_level,
++			"%d: fsi - (%d) in state %s",
++			state->id, service->localport,
++			srvstate_names[service->srvstate]);
++		return;
++	}
++
++	vchiq_set_service_state(service, VCHIQ_SRVSTATE_FREE);
++
++	up(&service->remove_event);
++
++	/* Release the initial lock */
++	unlock_service(service);
++}
++
++VCHIQ_STATUS_T
++vchiq_connect_internal(VCHIQ_STATE_T *state, VCHIQ_INSTANCE_T instance)
++{
++	VCHIQ_SERVICE_T *service;
++	int i;
++
++	/* Find all services registered to this client and enable them. */
++	i = 0;
++	while ((service = next_service_by_instance(state, instance,
++		&i)) !=	NULL) {
++		if (service->srvstate == VCHIQ_SRVSTATE_HIDDEN)
++			vchiq_set_service_state(service,
++				VCHIQ_SRVSTATE_LISTENING);
++		unlock_service(service);
++	}
++
++	if (state->conn_state == VCHIQ_CONNSTATE_DISCONNECTED) {
++		if (queue_message(state, NULL,
++			VCHIQ_MAKE_MSG(VCHIQ_MSG_CONNECT, 0, 0), NULL, 0,
++			0, 1) == VCHIQ_RETRY)
++			return VCHIQ_RETRY;
++
++		vchiq_set_conn_state(state, VCHIQ_CONNSTATE_CONNECTING);
++	}
++
++	if (state->conn_state == VCHIQ_CONNSTATE_CONNECTING) {
++		if (down_interruptible(&state->connect) != 0)
++			return VCHIQ_RETRY;
++
++		vchiq_set_conn_state(state, VCHIQ_CONNSTATE_CONNECTED);
++		up(&state->connect);
++	}
++
++	return VCHIQ_SUCCESS;
++}
++
++VCHIQ_STATUS_T
++vchiq_shutdown_internal(VCHIQ_STATE_T *state, VCHIQ_INSTANCE_T instance)
++{
++	VCHIQ_SERVICE_T *service;
++	int i;
++
++	/* Find all services registered to this client and enable them. */
++	i = 0;
++	while ((service = next_service_by_instance(state, instance,
++		&i)) !=	NULL) {
++		(void)vchiq_remove_service(service->handle);
++		unlock_service(service);
++	}
++
++	return VCHIQ_SUCCESS;
++}
++
++VCHIQ_STATUS_T
++vchiq_pause_internal(VCHIQ_STATE_T *state)
++{
++	VCHIQ_STATUS_T status = VCHIQ_SUCCESS;
++
++	switch (state->conn_state) {
++	case VCHIQ_CONNSTATE_CONNECTED:
++		/* Request a pause */
++		vchiq_set_conn_state(state, VCHIQ_CONNSTATE_PAUSING);
++		request_poll(state, NULL, 0);
++		break;
++	default:
++		vchiq_log_error(vchiq_core_log_level,
++			"vchiq_pause_internal in state %s\n",
++			conn_state_names[state->conn_state]);
++		status = VCHIQ_ERROR;
++		VCHIQ_STATS_INC(state, error_count);
++		break;
++	}
++
++	return status;
++}
++
++VCHIQ_STATUS_T
++vchiq_resume_internal(VCHIQ_STATE_T *state)
++{
++	VCHIQ_STATUS_T status = VCHIQ_SUCCESS;
++
++	if (state->conn_state == VCHIQ_CONNSTATE_PAUSED) {
++		vchiq_set_conn_state(state, VCHIQ_CONNSTATE_RESUMING);
++		request_poll(state, NULL, 0);
++	} else {
++		status = VCHIQ_ERROR;
++		VCHIQ_STATS_INC(state, error_count);
++	}
++
++	return status;
++}
++
++VCHIQ_STATUS_T
++vchiq_close_service(VCHIQ_SERVICE_HANDLE_T handle)
++{
++	/* Unregister the service */
++	VCHIQ_SERVICE_T *service = find_service_by_handle(handle);
++	VCHIQ_STATUS_T status = VCHIQ_SUCCESS;
++
++	if (!service)
++		return VCHIQ_ERROR;
++
++	vchiq_log_info(vchiq_core_log_level,
++		"%d: close_service:%d",
++		service->state->id, service->localport);
++
++	if ((service->srvstate == VCHIQ_SRVSTATE_FREE) ||
++		(service->srvstate == VCHIQ_SRVSTATE_LISTENING) ||
++		(service->srvstate == VCHIQ_SRVSTATE_HIDDEN)) {
++		unlock_service(service);
++		return VCHIQ_ERROR;
++	}
++
++	mark_service_closing(service);
++
++	if (current == service->state->slot_handler_thread) {
++		status = vchiq_close_service_internal(service,
++			0/*!close_recvd*/);
++		BUG_ON(status == VCHIQ_RETRY);
++	} else {
++	/* Mark the service for termination by the slot handler */
++		request_poll(service->state, service, VCHIQ_POLL_TERMINATE);
++	}
++
++	while (1) {
++		if (down_interruptible(&service->remove_event) != 0) {
++			status = VCHIQ_RETRY;
++			break;
++		}
++
++		if ((service->srvstate == VCHIQ_SRVSTATE_FREE) ||
++			(service->srvstate == VCHIQ_SRVSTATE_LISTENING) ||
++			(service->srvstate == VCHIQ_SRVSTATE_OPEN))
++			break;
++
++		vchiq_log_warning(vchiq_core_log_level,
++			"%d: close_service:%d - waiting in state %s",
++			service->state->id, service->localport,
++			srvstate_names[service->srvstate]);
++	}
++
++	if ((status == VCHIQ_SUCCESS) &&
++		(service->srvstate != VCHIQ_SRVSTATE_FREE) &&
++		(service->srvstate != VCHIQ_SRVSTATE_LISTENING))
++		status = VCHIQ_ERROR;
++
++	unlock_service(service);
++
++	return status;
++}
++
++VCHIQ_STATUS_T
++vchiq_remove_service(VCHIQ_SERVICE_HANDLE_T handle)
++{
++	/* Unregister the service */
++	VCHIQ_SERVICE_T *service = find_service_by_handle(handle);
++	VCHIQ_STATUS_T status = VCHIQ_SUCCESS;
++
++	if (!service)
++		return VCHIQ_ERROR;
++
++	vchiq_log_info(vchiq_core_log_level,
++		"%d: remove_service:%d",
++		service->state->id, service->localport);
++
++	if (service->srvstate == VCHIQ_SRVSTATE_FREE) {
++		unlock_service(service);
++		return VCHIQ_ERROR;
++	}
++
++	mark_service_closing(service);
++
++	if ((service->srvstate == VCHIQ_SRVSTATE_HIDDEN) ||
++		(current == service->state->slot_handler_thread)) {
++		/* Make it look like a client, because it must be removed and
++		   not left in the LISTENING state. */
++		service->public_fourcc = VCHIQ_FOURCC_INVALID;
++
++		status = vchiq_close_service_internal(service,
++			0/*!close_recvd*/);
++		BUG_ON(status == VCHIQ_RETRY);
++	} else {
++		/* Mark the service for removal by the slot handler */
++		request_poll(service->state, service, VCHIQ_POLL_REMOVE);
++	}
++	while (1) {
++		if (down_interruptible(&service->remove_event) != 0) {
++			status = VCHIQ_RETRY;
++			break;
++		}
++
++		if ((service->srvstate == VCHIQ_SRVSTATE_FREE) ||
++			(service->srvstate == VCHIQ_SRVSTATE_OPEN))
++			break;
++
++		vchiq_log_warning(vchiq_core_log_level,
++			"%d: remove_service:%d - waiting in state %s",
++			service->state->id, service->localport,
++			srvstate_names[service->srvstate]);
++	}
++
++	if ((status == VCHIQ_SUCCESS) &&
++		(service->srvstate != VCHIQ_SRVSTATE_FREE))
++		status = VCHIQ_ERROR;
++
++	unlock_service(service);
++
++	return status;
++}
++
++
++/* This function may be called by kernel threads or user threads.
++ * User threads may receive VCHIQ_RETRY to indicate that a signal has been
++ * received and the call should be retried after being returned to user
++ * context.
++ * When called in blocking mode, the userdata field points to a bulk_waiter
++ * structure.
++ */
++VCHIQ_STATUS_T
++vchiq_bulk_transfer(VCHIQ_SERVICE_HANDLE_T handle,
++	VCHI_MEM_HANDLE_T memhandle, void *offset, int size, void *userdata,
++	VCHIQ_BULK_MODE_T mode, VCHIQ_BULK_DIR_T dir)
++{
++	VCHIQ_SERVICE_T *service = find_service_by_handle(handle);
++	VCHIQ_BULK_QUEUE_T *queue;
++	VCHIQ_BULK_T *bulk;
++	VCHIQ_STATE_T *state;
++	struct bulk_waiter *bulk_waiter = NULL;
++	const char dir_char = (dir == VCHIQ_BULK_TRANSMIT) ? 't' : 'r';
++	const int dir_msgtype = (dir == VCHIQ_BULK_TRANSMIT) ?
++		VCHIQ_MSG_BULK_TX : VCHIQ_MSG_BULK_RX;
++	VCHIQ_STATUS_T status = VCHIQ_ERROR;
++
++	if (!service ||
++		 (service->srvstate != VCHIQ_SRVSTATE_OPEN) ||
++		 ((memhandle == VCHI_MEM_HANDLE_INVALID) && (offset == NULL)) ||
++		 (vchiq_check_service(service) != VCHIQ_SUCCESS))
++		goto error_exit;
++
++	switch (mode) {
++	case VCHIQ_BULK_MODE_NOCALLBACK:
++	case VCHIQ_BULK_MODE_CALLBACK:
++		break;
++	case VCHIQ_BULK_MODE_BLOCKING:
++		bulk_waiter = (struct bulk_waiter *)userdata;
++		sema_init(&bulk_waiter->event, 0);
++		bulk_waiter->actual = 0;
++		bulk_waiter->bulk = NULL;
++		break;
++	case VCHIQ_BULK_MODE_WAITING:
++		bulk_waiter = (struct bulk_waiter *)userdata;
++		bulk = bulk_waiter->bulk;
++		goto waiting;
++	default:
++		goto error_exit;
++	}
++
++	state = service->state;
++
++	queue = (dir == VCHIQ_BULK_TRANSMIT) ?
++		&service->bulk_tx : &service->bulk_rx;
++
++	if (mutex_lock_interruptible(&service->bulk_mutex) != 0) {
++		status = VCHIQ_RETRY;
++		goto error_exit;
++	}
++
++	if (queue->local_insert == queue->remove + VCHIQ_NUM_SERVICE_BULKS) {
++		VCHIQ_SERVICE_STATS_INC(service, bulk_stalls);
++		do {
++			mutex_unlock(&service->bulk_mutex);
++			if (down_interruptible(&service->bulk_remove_event)
++				!= 0) {
++				status = VCHIQ_RETRY;
++				goto error_exit;
++			}
++			if (mutex_lock_interruptible(&service->bulk_mutex)
++				!= 0) {
++				status = VCHIQ_RETRY;
++				goto error_exit;
++			}
++		} while (queue->local_insert == queue->remove +
++				VCHIQ_NUM_SERVICE_BULKS);
++	}
++
++	bulk = &queue->bulks[BULK_INDEX(queue->local_insert)];
++
++	bulk->mode = mode;
++	bulk->dir = dir;
++	bulk->userdata = userdata;
++	bulk->size = size;
++	bulk->actual = VCHIQ_BULK_ACTUAL_ABORTED;
++
++	if (vchiq_prepare_bulk_data(bulk, memhandle, offset, size, dir) !=
++		VCHIQ_SUCCESS)
++		goto unlock_error_exit;
++
++	wmb();
++
++	vchiq_log_info(vchiq_core_log_level,
++		"%d: bt (%d->%d) %cx %x@%x %x",
++		state->id,
++		service->localport, service->remoteport, dir_char,
++		size, (unsigned int)bulk->data, (unsigned int)userdata);
++
++	if (state->is_master) {
++		queue->local_insert++;
++		if (resolve_bulks(service, queue))
++			request_poll(state, service,
++				(dir == VCHIQ_BULK_TRANSMIT) ?
++				VCHIQ_POLL_TXNOTIFY : VCHIQ_POLL_RXNOTIFY);
++	} else {
++		int payload[2] = { (int)bulk->data, bulk->size };
++		VCHIQ_ELEMENT_T element = { payload, sizeof(payload) };
++
++		status = queue_message(state, NULL,
++			VCHIQ_MAKE_MSG(dir_msgtype,
++				service->localport, service->remoteport),
++			&element, 1, sizeof(payload), 1);
++		if (status != VCHIQ_SUCCESS) {
++			vchiq_complete_bulk(bulk);
++			goto unlock_error_exit;
++		}
++		queue->local_insert++;
++	}
++
++	mutex_unlock(&service->bulk_mutex);
++
++	vchiq_log_trace(vchiq_core_log_level,
++		"%d: bt:%d %cx li=%x ri=%x p=%x",
++		state->id,
++		service->localport, dir_char,
++		queue->local_insert, queue->remote_insert, queue->process);
++
++waiting:
++	unlock_service(service);
++
++	status = VCHIQ_SUCCESS;
++
++	if (bulk_waiter) {
++		bulk_waiter->bulk = bulk;
++		if (down_interruptible(&bulk_waiter->event) != 0)
++			status = VCHIQ_RETRY;
++		else if (bulk_waiter->actual == VCHIQ_BULK_ACTUAL_ABORTED)
++			status = VCHIQ_ERROR;
++	}
++
++	return status;
++
++unlock_error_exit:
++	mutex_unlock(&service->bulk_mutex);
++
++error_exit:
++	if (service)
++		unlock_service(service);
++	return status;
++}
++
++VCHIQ_STATUS_T
++vchiq_queue_message(VCHIQ_SERVICE_HANDLE_T handle,
++	const VCHIQ_ELEMENT_T *elements, unsigned int count)
++{
++	VCHIQ_SERVICE_T *service = find_service_by_handle(handle);
++	VCHIQ_STATUS_T status = VCHIQ_ERROR;
++
++	unsigned int size = 0;
++	unsigned int i;
++
++	if (!service ||
++		(vchiq_check_service(service) != VCHIQ_SUCCESS))
++		goto error_exit;
++
++	for (i = 0; i < (unsigned int)count; i++) {
++		if (elements[i].size) {
++			if (elements[i].data == NULL) {
++				VCHIQ_SERVICE_STATS_INC(service, error_count);
++				goto error_exit;
++			}
++			size += elements[i].size;
++		}
++	}
++
++	if (size > VCHIQ_MAX_MSG_SIZE) {
++		VCHIQ_SERVICE_STATS_INC(service, error_count);
++		goto error_exit;
++	}
++
++	switch (service->srvstate) {
++	case VCHIQ_SRVSTATE_OPEN:
++		status = queue_message(service->state, service,
++				VCHIQ_MAKE_MSG(VCHIQ_MSG_DATA,
++					service->localport,
++					service->remoteport),
++				elements, count, size, 1);
++		break;
++	case VCHIQ_SRVSTATE_OPENSYNC:
++		status = queue_message_sync(service->state, service,
++				VCHIQ_MAKE_MSG(VCHIQ_MSG_DATA,
++					service->localport,
++					service->remoteport),
++				elements, count, size, 1);
++		break;
++	default:
++		status = VCHIQ_ERROR;
++		break;
++	}
++
++error_exit:
++	if (service)
++		unlock_service(service);
++
++	return status;
++}
++
++void
++vchiq_release_message(VCHIQ_SERVICE_HANDLE_T handle, VCHIQ_HEADER_T *header)
++{
++	VCHIQ_SERVICE_T *service = find_service_by_handle(handle);
++	VCHIQ_SHARED_STATE_T *remote;
++	VCHIQ_STATE_T *state;
++	int slot_index;
++
++	if (!service)
++		return;
++
++	state = service->state;
++	remote = state->remote;
++
++	slot_index = SLOT_INDEX_FROM_DATA(state, (void *)header);
++
++	if ((slot_index >= remote->slot_first) &&
++		(slot_index <= remote->slot_last)) {
++		int msgid = header->msgid;
++		if (msgid & VCHIQ_MSGID_CLAIMED) {
++			VCHIQ_SLOT_INFO_T *slot_info =
++				SLOT_INFO_FROM_INDEX(state, slot_index);
++
++			release_slot(state, slot_info, header, service);
++		}
++	} else if (slot_index == remote->slot_sync)
++		release_message_sync(state, header);
++
++	unlock_service(service);
++}
++
++static void
++release_message_sync(VCHIQ_STATE_T *state, VCHIQ_HEADER_T *header)
++{
++	header->msgid = VCHIQ_MSGID_PADDING;
++	wmb();
++	remote_event_signal(&state->remote->sync_release);
++}
++
++VCHIQ_STATUS_T
++vchiq_get_peer_version(VCHIQ_SERVICE_HANDLE_T handle, short *peer_version)
++{
++   VCHIQ_STATUS_T status = VCHIQ_ERROR;
++   VCHIQ_SERVICE_T *service = find_service_by_handle(handle);
++
++   if (!service ||
++      (vchiq_check_service(service) != VCHIQ_SUCCESS) ||
++      !peer_version)
++      goto exit;
++   *peer_version = service->peer_version;
++   status = VCHIQ_SUCCESS;
++
++exit:
++   if (service)
++      unlock_service(service);
++   return status;
++}
++
++VCHIQ_STATUS_T
++vchiq_get_config(VCHIQ_INSTANCE_T instance,
++	int config_size, VCHIQ_CONFIG_T *pconfig)
++{
++	VCHIQ_CONFIG_T config;
++
++	(void)instance;
++
++	config.max_msg_size           = VCHIQ_MAX_MSG_SIZE;
++	config.bulk_threshold         = VCHIQ_MAX_MSG_SIZE;
++	config.max_outstanding_bulks  = VCHIQ_NUM_SERVICE_BULKS;
++	config.max_services           = VCHIQ_MAX_SERVICES;
++	config.version                = VCHIQ_VERSION;
++	config.version_min            = VCHIQ_VERSION_MIN;
++
++	if (config_size > sizeof(VCHIQ_CONFIG_T))
++		return VCHIQ_ERROR;
++
++	memcpy(pconfig, &config,
++		min(config_size, (int)(sizeof(VCHIQ_CONFIG_T))));
++
++	return VCHIQ_SUCCESS;
++}
++
++VCHIQ_STATUS_T
++vchiq_set_service_option(VCHIQ_SERVICE_HANDLE_T handle,
++	VCHIQ_SERVICE_OPTION_T option, int value)
++{
++	VCHIQ_SERVICE_T *service = find_service_by_handle(handle);
++	VCHIQ_STATUS_T status = VCHIQ_ERROR;
++
++	if (service) {
++		switch (option) {
++		case VCHIQ_SERVICE_OPTION_AUTOCLOSE:
++			service->auto_close = value;
++			status = VCHIQ_SUCCESS;
++			break;
++
++		case VCHIQ_SERVICE_OPTION_SLOT_QUOTA: {
++			VCHIQ_SERVICE_QUOTA_T *service_quota =
++				&service->state->service_quotas[
++					service->localport];
++			if (value == 0)
++				value = service->state->default_slot_quota;
++			if ((value >= service_quota->slot_use_count) &&
++				 (value < (unsigned short)~0)) {
++				service_quota->slot_quota = value;
++				if ((value >= service_quota->slot_use_count) &&
++					(service_quota->message_quota >=
++					 service_quota->message_use_count)) {
++					/* Signal the service that it may have
++					** dropped below its quota */
++					up(&service_quota->quota_event);
++				}
++				status = VCHIQ_SUCCESS;
++			}
++		} break;
++
++		case VCHIQ_SERVICE_OPTION_MESSAGE_QUOTA: {
++			VCHIQ_SERVICE_QUOTA_T *service_quota =
++				&service->state->service_quotas[
++					service->localport];
++			if (value == 0)
++				value = service->state->default_message_quota;
++			if ((value >= service_quota->message_use_count) &&
++				 (value < (unsigned short)~0)) {
++				service_quota->message_quota = value;
++				if ((value >=
++					service_quota->message_use_count) &&
++					(service_quota->slot_quota >=
++					service_quota->slot_use_count))
++					/* Signal the service that it may have
++					** dropped below its quota */
++					up(&service_quota->quota_event);
++				status = VCHIQ_SUCCESS;
++			}
++		} break;
++
++		case VCHIQ_SERVICE_OPTION_SYNCHRONOUS:
++			if ((service->srvstate == VCHIQ_SRVSTATE_HIDDEN) ||
++				(service->srvstate ==
++				VCHIQ_SRVSTATE_LISTENING)) {
++				service->sync = value;
++				status = VCHIQ_SUCCESS;
++			}
++			break;
++
++		default:
++			break;
++		}
++		unlock_service(service);
++	}
++
++	return status;
++}
++
++void
++vchiq_dump_shared_state(void *dump_context, VCHIQ_STATE_T *state,
++	VCHIQ_SHARED_STATE_T *shared, const char *label)
++{
++	static const char *const debug_names[] = {
++		"<entries>",
++		"SLOT_HANDLER_COUNT",
++		"SLOT_HANDLER_LINE",
++		"PARSE_LINE",
++		"PARSE_HEADER",
++		"PARSE_MSGID",
++		"AWAIT_COMPLETION_LINE",
++		"DEQUEUE_MESSAGE_LINE",
++		"SERVICE_CALLBACK_LINE",
++		"MSG_QUEUE_FULL_COUNT",
++		"COMPLETION_QUEUE_FULL_COUNT"
++	};
++	int i;
++
++	char buf[80];
++	int len;
++	len = snprintf(buf, sizeof(buf),
++		"  %s: slots %d-%d tx_pos=%x recycle=%x",
++		label, shared->slot_first, shared->slot_last,
++		shared->tx_pos, shared->slot_queue_recycle);
++	vchiq_dump(dump_context, buf, len + 1);
++
++	len = snprintf(buf, sizeof(buf),
++		"    Slots claimed:");
++	vchiq_dump(dump_context, buf, len + 1);
++
++	for (i = shared->slot_first; i <= shared->slot_last; i++) {
++		VCHIQ_SLOT_INFO_T slot_info = *SLOT_INFO_FROM_INDEX(state, i);
++		if (slot_info.use_count != slot_info.release_count) {
++			len = snprintf(buf, sizeof(buf),
++				"      %d: %d/%d", i, slot_info.use_count,
++				slot_info.release_count);
++			vchiq_dump(dump_context, buf, len + 1);
++		}
++	}
++
++	for (i = 1; i < shared->debug[DEBUG_ENTRIES]; i++) {
++		len = snprintf(buf, sizeof(buf), "    DEBUG: %s = %d(%x)",
++			debug_names[i], shared->debug[i], shared->debug[i]);
++		vchiq_dump(dump_context, buf, len + 1);
++	}
++}
++
++void
++vchiq_dump_state(void *dump_context, VCHIQ_STATE_T *state)
++{
++	char buf[80];
++	int len;
++	int i;
++
++	len = snprintf(buf, sizeof(buf), "State %d: %s", state->id,
++		conn_state_names[state->conn_state]);
++	vchiq_dump(dump_context, buf, len + 1);
++
++	len = snprintf(buf, sizeof(buf),
++		"  tx_pos=%x(@%x), rx_pos=%x(@%x)",
++		state->local->tx_pos,
++		(uint32_t)state->tx_data +
++			(state->local_tx_pos & VCHIQ_SLOT_MASK),
++		state->rx_pos,
++		(uint32_t)state->rx_data +
++			(state->rx_pos & VCHIQ_SLOT_MASK));
++	vchiq_dump(dump_context, buf, len + 1);
++
++	len = snprintf(buf, sizeof(buf),
++		"  Version: %d (min %d)",
++		VCHIQ_VERSION, VCHIQ_VERSION_MIN);
++	vchiq_dump(dump_context, buf, len + 1);
++
++	if (VCHIQ_ENABLE_STATS) {
++		len = snprintf(buf, sizeof(buf),
++			"  Stats: ctrl_tx_count=%d, ctrl_rx_count=%d, "
++			"error_count=%d",
++			state->stats.ctrl_tx_count, state->stats.ctrl_rx_count,
++			state->stats.error_count);
++		vchiq_dump(dump_context, buf, len + 1);
++	}
++
++	len = snprintf(buf, sizeof(buf),
++		"  Slots: %d available (%d data), %d recyclable, %d stalls "
++		"(%d data)",
++		((state->slot_queue_available * VCHIQ_SLOT_SIZE) -
++			state->local_tx_pos) / VCHIQ_SLOT_SIZE,
++		state->data_quota - state->data_use_count,
++		state->local->slot_queue_recycle - state->slot_queue_available,
++		state->stats.slot_stalls, state->stats.data_stalls);
++	vchiq_dump(dump_context, buf, len + 1);
++
++	vchiq_dump_platform_state(dump_context);
++
++	vchiq_dump_shared_state(dump_context, state, state->local, "Local");
++	vchiq_dump_shared_state(dump_context, state, state->remote, "Remote");
++
++	vchiq_dump_platform_instances(dump_context);
++
++	for (i = 0; i < state->unused_service; i++) {
++		VCHIQ_SERVICE_T *service = find_service_by_port(state, i);
++
++		if (service) {
++			vchiq_dump_service_state(dump_context, service);
++			unlock_service(service);
++		}
++	}
++}
++
++void
++vchiq_dump_service_state(void *dump_context, VCHIQ_SERVICE_T *service)
++{
++	char buf[80];
++	int len;
++
++	len = snprintf(buf, sizeof(buf), "Service %d: %s (ref %u)",
++		service->localport, srvstate_names[service->srvstate],
++		service->ref_count - 1); /*Don't include the lock just taken*/
++
++	if (service->srvstate != VCHIQ_SRVSTATE_FREE) {
++		char remoteport[30];
++		VCHIQ_SERVICE_QUOTA_T *service_quota =
++			&service->state->service_quotas[service->localport];
++		int fourcc = service->base.fourcc;
++		int tx_pending, rx_pending;
++		if (service->remoteport != VCHIQ_PORT_FREE) {
++			int len2 = snprintf(remoteport, sizeof(remoteport),
++				"%d", service->remoteport);
++			if (service->public_fourcc != VCHIQ_FOURCC_INVALID)
++				snprintf(remoteport + len2,
++					sizeof(remoteport) - len2,
++					" (client %x)", service->client_id);
++		} else
++			strcpy(remoteport, "n/a");
++
++		len += snprintf(buf + len, sizeof(buf) - len,
++			" '%c%c%c%c' remote %s (msg use %d/%d, slot use %d/%d)",
++			VCHIQ_FOURCC_AS_4CHARS(fourcc),
++			remoteport,
++			service_quota->message_use_count,
++			service_quota->message_quota,
++			service_quota->slot_use_count,
++			service_quota->slot_quota);
++
++		vchiq_dump(dump_context, buf, len + 1);
++
++		tx_pending = service->bulk_tx.local_insert -
++			service->bulk_tx.remote_insert;
++
++		rx_pending = service->bulk_rx.local_insert -
++			service->bulk_rx.remote_insert;
++
++		len = snprintf(buf, sizeof(buf),
++			"  Bulk: tx_pending=%d (size %d),"
++			" rx_pending=%d (size %d)",
++			tx_pending,
++			tx_pending ? service->bulk_tx.bulks[
++			BULK_INDEX(service->bulk_tx.remove)].size : 0,
++			rx_pending,
++			rx_pending ? service->bulk_rx.bulks[
++			BULK_INDEX(service->bulk_rx.remove)].size : 0);
++
++		if (VCHIQ_ENABLE_STATS) {
++			vchiq_dump(dump_context, buf, len + 1);
++
++			len = snprintf(buf, sizeof(buf),
++				"  Ctrl: tx_count=%d, tx_bytes=%llu, "
++				"rx_count=%d, rx_bytes=%llu",
++				service->stats.ctrl_tx_count,
++				service->stats.ctrl_tx_bytes,
++				service->stats.ctrl_rx_count,
++				service->stats.ctrl_rx_bytes);
++			vchiq_dump(dump_context, buf, len + 1);
++
++			len = snprintf(buf, sizeof(buf),
++				"  Bulk: tx_count=%d, tx_bytes=%llu, "
++				"rx_count=%d, rx_bytes=%llu",
++				service->stats.bulk_tx_count,
++				service->stats.bulk_tx_bytes,
++				service->stats.bulk_rx_count,
++				service->stats.bulk_rx_bytes);
++			vchiq_dump(dump_context, buf, len + 1);
++
++			len = snprintf(buf, sizeof(buf),
++				"  %d quota stalls, %d slot stalls, "
++				"%d bulk stalls, %d aborted, %d errors",
++				service->stats.quota_stalls,
++				service->stats.slot_stalls,
++				service->stats.bulk_stalls,
++				service->stats.bulk_aborted_count,
++				service->stats.error_count);
++		 }
++	}
++
++	vchiq_dump(dump_context, buf, len + 1);
++
++	if (service->srvstate != VCHIQ_SRVSTATE_FREE)
++		vchiq_dump_platform_service_state(dump_context, service);
++}
++
++
++void
++vchiq_loud_error_header(void)
++{
++	vchiq_log_error(vchiq_core_log_level,
++		"============================================================"
++		"================");
++	vchiq_log_error(vchiq_core_log_level,
++		"============================================================"
++		"================");
++	vchiq_log_error(vchiq_core_log_level, "=====");
++}
++
++void
++vchiq_loud_error_footer(void)
++{
++	vchiq_log_error(vchiq_core_log_level, "=====");
++	vchiq_log_error(vchiq_core_log_level,
++		"============================================================"
++		"================");
++	vchiq_log_error(vchiq_core_log_level,
++		"============================================================"
++		"================");
++}
++
++
++VCHIQ_STATUS_T vchiq_send_remote_use(VCHIQ_STATE_T *state)
++{
++	VCHIQ_STATUS_T status = VCHIQ_RETRY;
++	if (state->conn_state != VCHIQ_CONNSTATE_DISCONNECTED)
++		status = queue_message(state, NULL,
++			VCHIQ_MAKE_MSG(VCHIQ_MSG_REMOTE_USE, 0, 0),
++			NULL, 0, 0, 0);
++	return status;
++}
++
++VCHIQ_STATUS_T vchiq_send_remote_release(VCHIQ_STATE_T *state)
++{
++	VCHIQ_STATUS_T status = VCHIQ_RETRY;
++	if (state->conn_state != VCHIQ_CONNSTATE_DISCONNECTED)
++		status = queue_message(state, NULL,
++			VCHIQ_MAKE_MSG(VCHIQ_MSG_REMOTE_RELEASE, 0, 0),
++			NULL, 0, 0, 0);
++	return status;
++}
++
++VCHIQ_STATUS_T vchiq_send_remote_use_active(VCHIQ_STATE_T *state)
++{
++	VCHIQ_STATUS_T status = VCHIQ_RETRY;
++	if (state->conn_state != VCHIQ_CONNSTATE_DISCONNECTED)
++		status = queue_message(state, NULL,
++			VCHIQ_MAKE_MSG(VCHIQ_MSG_REMOTE_USE_ACTIVE, 0, 0),
++			NULL, 0, 0, 0);
++	return status;
++}
++
++void vchiq_log_dump_mem(const char *label, uint32_t addr, const void *voidMem,
++	size_t numBytes)
++{
++	const uint8_t  *mem = (const uint8_t *)voidMem;
++	size_t          offset;
++	char            lineBuf[100];
++	char           *s;
++
++	while (numBytes > 0) {
++		s = lineBuf;
++
++		for (offset = 0; offset < 16; offset++) {
++			if (offset < numBytes)
++				s += snprintf(s, 4, "%02x ", mem[offset]);
++			else
++				s += snprintf(s, 4, "   ");
++		}
++
++		for (offset = 0; offset < 16; offset++) {
++			if (offset < numBytes) {
++				uint8_t ch = mem[offset];
++
++				if ((ch < ' ') || (ch > '~'))
++					ch = '.';
++				*s++ = (char)ch;
++			}
++		}
++		*s++ = '\0';
++
++		if ((label != NULL) && (*label != '\0'))
++			vchiq_log_trace(VCHIQ_LOG_TRACE,
++				"%s: %08x: %s", label, addr, lineBuf);
++		else
++			vchiq_log_trace(VCHIQ_LOG_TRACE,
++				"%08x: %s", addr, lineBuf);
++
++		addr += 16;
++		mem += 16;
++		if (numBytes > 16)
++			numBytes -= 16;
++		else
++			numBytes = 0;
++	}
++}
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.h linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.h
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.h	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,706 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHIQ_CORE_H
++#define VCHIQ_CORE_H
++
++#include <linux/mutex.h>
++#include <linux/semaphore.h>
++#include <linux/kthread.h>
++
++#include "vchiq_cfg.h"
++
++#include "vchiq.h"
++
++/* Run time control of log level, based on KERN_XXX level. */
++#define VCHIQ_LOG_DEFAULT  4
++#define VCHIQ_LOG_ERROR    3
++#define VCHIQ_LOG_WARNING  4
++#define VCHIQ_LOG_INFO     6
++#define VCHIQ_LOG_TRACE    7
++
++#define VCHIQ_LOG_PREFIX   KERN_INFO "vchiq: "
++
++#ifndef vchiq_log_error
++#define vchiq_log_error(cat, fmt, ...) \
++	do { if (cat >= VCHIQ_LOG_ERROR) \
++		printk(VCHIQ_LOG_PREFIX fmt "\n", ##__VA_ARGS__); } while (0)
++#endif
++#ifndef vchiq_log_warning
++#define vchiq_log_warning(cat, fmt, ...) \
++	do { if (cat >= VCHIQ_LOG_WARNING) \
++		 printk(VCHIQ_LOG_PREFIX fmt "\n", ##__VA_ARGS__); } while (0)
++#endif
++#ifndef vchiq_log_info
++#define vchiq_log_info(cat, fmt, ...) \
++	do { if (cat >= VCHIQ_LOG_INFO) \
++		printk(VCHIQ_LOG_PREFIX fmt "\n", ##__VA_ARGS__); } while (0)
++#endif
++#ifndef vchiq_log_trace
++#define vchiq_log_trace(cat, fmt, ...) \
++	do { if (cat >= VCHIQ_LOG_TRACE) \
++		printk(VCHIQ_LOG_PREFIX fmt "\n", ##__VA_ARGS__); } while (0)
++#endif
++
++#define vchiq_loud_error(...) \
++	vchiq_log_error(vchiq_core_log_level, "===== " __VA_ARGS__)
++
++#ifndef vchiq_static_assert
++#define vchiq_static_assert(cond) __attribute__((unused)) \
++	extern int vchiq_static_assert[(cond) ? 1 : -1]
++#endif
++
++#define IS_POW2(x) (x && ((x & (x - 1)) == 0))
++
++/* Ensure that the slot size and maximum number of slots are powers of 2 */
++vchiq_static_assert(IS_POW2(VCHIQ_SLOT_SIZE));
++vchiq_static_assert(IS_POW2(VCHIQ_MAX_SLOTS));
++vchiq_static_assert(IS_POW2(VCHIQ_MAX_SLOTS_PER_SIDE));
++
++#define VCHIQ_SLOT_MASK        (VCHIQ_SLOT_SIZE - 1)
++#define VCHIQ_SLOT_QUEUE_MASK  (VCHIQ_MAX_SLOTS_PER_SIDE - 1)
++#define VCHIQ_SLOT_ZERO_SLOTS  ((sizeof(VCHIQ_SLOT_ZERO_T) + \
++	VCHIQ_SLOT_SIZE - 1) / VCHIQ_SLOT_SIZE)
++
++#define VCHIQ_MSG_PADDING            0  /* -                                 */
++#define VCHIQ_MSG_CONNECT            1  /* -                                 */
++#define VCHIQ_MSG_OPEN               2  /* + (srcport, -), fourcc, client_id */
++#define VCHIQ_MSG_OPENACK            3  /* + (srcport, dstport)              */
++#define VCHIQ_MSG_CLOSE              4  /* + (srcport, dstport)              */
++#define VCHIQ_MSG_DATA               5  /* + (srcport, dstport)              */
++#define VCHIQ_MSG_BULK_RX            6  /* + (srcport, dstport), data, size  */
++#define VCHIQ_MSG_BULK_TX            7  /* + (srcport, dstport), data, size  */
++#define VCHIQ_MSG_BULK_RX_DONE       8  /* + (srcport, dstport), actual      */
++#define VCHIQ_MSG_BULK_TX_DONE       9  /* + (srcport, dstport), actual      */
++#define VCHIQ_MSG_PAUSE             10  /* -                                 */
++#define VCHIQ_MSG_RESUME            11  /* -                                 */
++#define VCHIQ_MSG_REMOTE_USE        12  /* -                                 */
++#define VCHIQ_MSG_REMOTE_RELEASE    13  /* -                                 */
++#define VCHIQ_MSG_REMOTE_USE_ACTIVE 14  /* -                                 */
++
++#define VCHIQ_PORT_MAX                 (VCHIQ_MAX_SERVICES - 1)
++#define VCHIQ_PORT_FREE                0x1000
++#define VCHIQ_PORT_IS_VALID(port)      (port < VCHIQ_PORT_FREE)
++#define VCHIQ_MAKE_MSG(type, srcport, dstport) \
++	((type<<24) | (srcport<<12) | (dstport<<0))
++#define VCHIQ_MSG_TYPE(msgid)          ((unsigned int)msgid >> 24)
++#define VCHIQ_MSG_SRCPORT(msgid) \
++	(unsigned short)(((unsigned int)msgid >> 12) & 0xfff)
++#define VCHIQ_MSG_DSTPORT(msgid) \
++	((unsigned short)msgid & 0xfff)
++
++#define VCHIQ_FOURCC_AS_4CHARS(fourcc)	\
++	((fourcc) >> 24) & 0xff, \
++	((fourcc) >> 16) & 0xff, \
++	((fourcc) >>  8) & 0xff, \
++	(fourcc) & 0xff
++
++/* Ensure the fields are wide enough */
++vchiq_static_assert(VCHIQ_MSG_SRCPORT(VCHIQ_MAKE_MSG(0, 0, VCHIQ_PORT_MAX))
++	== 0);
++vchiq_static_assert(VCHIQ_MSG_TYPE(VCHIQ_MAKE_MSG(0, VCHIQ_PORT_MAX, 0)) == 0);
++vchiq_static_assert((unsigned int)VCHIQ_PORT_MAX <
++	(unsigned int)VCHIQ_PORT_FREE);
++
++#define VCHIQ_MSGID_PADDING            VCHIQ_MAKE_MSG(VCHIQ_MSG_PADDING, 0, 0)
++#define VCHIQ_MSGID_CLAIMED            0x40000000
++
++#define VCHIQ_FOURCC_INVALID           0x00000000
++#define VCHIQ_FOURCC_IS_LEGAL(fourcc)  (fourcc != VCHIQ_FOURCC_INVALID)
++
++#define VCHIQ_BULK_ACTUAL_ABORTED -1
++
++typedef uint32_t BITSET_T;
++
++vchiq_static_assert((sizeof(BITSET_T) * 8) == 32);
++
++#define BITSET_SIZE(b)        ((b + 31) >> 5)
++#define BITSET_WORD(b)        (b >> 5)
++#define BITSET_BIT(b)         (1 << (b & 31))
++#define BITSET_ZERO(bs)       memset(bs, 0, sizeof(bs))
++#define BITSET_IS_SET(bs, b)  (bs[BITSET_WORD(b)] & BITSET_BIT(b))
++#define BITSET_SET(bs, b)     (bs[BITSET_WORD(b)] |= BITSET_BIT(b))
++#define BITSET_CLR(bs, b)     (bs[BITSET_WORD(b)] &= ~BITSET_BIT(b))
++
++#if VCHIQ_ENABLE_STATS
++#define VCHIQ_STATS_INC(state, stat) (state->stats. stat++)
++#define VCHIQ_SERVICE_STATS_INC(service, stat) (service->stats. stat++)
++#define VCHIQ_SERVICE_STATS_ADD(service, stat, addend) \
++	(service->stats. stat += addend)
++#else
++#define VCHIQ_STATS_INC(state, stat) ((void)0)
++#define VCHIQ_SERVICE_STATS_INC(service, stat) ((void)0)
++#define VCHIQ_SERVICE_STATS_ADD(service, stat, addend) ((void)0)
++#endif
++
++enum {
++	DEBUG_ENTRIES,
++#if VCHIQ_ENABLE_DEBUG
++	DEBUG_SLOT_HANDLER_COUNT,
++	DEBUG_SLOT_HANDLER_LINE,
++	DEBUG_PARSE_LINE,
++	DEBUG_PARSE_HEADER,
++	DEBUG_PARSE_MSGID,
++	DEBUG_AWAIT_COMPLETION_LINE,
++	DEBUG_DEQUEUE_MESSAGE_LINE,
++	DEBUG_SERVICE_CALLBACK_LINE,
++	DEBUG_MSG_QUEUE_FULL_COUNT,
++	DEBUG_COMPLETION_QUEUE_FULL_COUNT,
++#endif
++	DEBUG_MAX
++};
++
++#if VCHIQ_ENABLE_DEBUG
++
++#define DEBUG_INITIALISE(local) int *debug_ptr = (local)->debug;
++#define DEBUG_TRACE(d) \
++	do { debug_ptr[DEBUG_ ## d] = __LINE__; dsb(); } while (0)
++#define DEBUG_VALUE(d, v) \
++	do { debug_ptr[DEBUG_ ## d] = (v); dsb(); } while (0)
++#define DEBUG_COUNT(d) \
++	do { debug_ptr[DEBUG_ ## d]++; dsb(); } while (0)
++
++#else /* VCHIQ_ENABLE_DEBUG */
++
++#define DEBUG_INITIALISE(local)
++#define DEBUG_TRACE(d)
++#define DEBUG_VALUE(d, v)
++#define DEBUG_COUNT(d)
++
++#endif /* VCHIQ_ENABLE_DEBUG */
++
++typedef enum {
++	VCHIQ_CONNSTATE_DISCONNECTED,
++	VCHIQ_CONNSTATE_CONNECTING,
++	VCHIQ_CONNSTATE_CONNECTED,
++	VCHIQ_CONNSTATE_PAUSING,
++	VCHIQ_CONNSTATE_PAUSE_SENT,
++	VCHIQ_CONNSTATE_PAUSED,
++	VCHIQ_CONNSTATE_RESUMING,
++	VCHIQ_CONNSTATE_PAUSE_TIMEOUT,
++	VCHIQ_CONNSTATE_RESUME_TIMEOUT
++} VCHIQ_CONNSTATE_T;
++
++enum {
++	VCHIQ_SRVSTATE_FREE,
++	VCHIQ_SRVSTATE_HIDDEN,
++	VCHIQ_SRVSTATE_LISTENING,
++	VCHIQ_SRVSTATE_OPENING,
++	VCHIQ_SRVSTATE_OPEN,
++	VCHIQ_SRVSTATE_OPENSYNC,
++	VCHIQ_SRVSTATE_CLOSESENT,
++	VCHIQ_SRVSTATE_CLOSERECVD,
++	VCHIQ_SRVSTATE_CLOSEWAIT,
++	VCHIQ_SRVSTATE_CLOSED
++};
++
++enum {
++	VCHIQ_POLL_TERMINATE,
++	VCHIQ_POLL_REMOVE,
++	VCHIQ_POLL_TXNOTIFY,
++	VCHIQ_POLL_RXNOTIFY,
++	VCHIQ_POLL_COUNT
++};
++
++typedef enum {
++	VCHIQ_BULK_TRANSMIT,
++	VCHIQ_BULK_RECEIVE
++} VCHIQ_BULK_DIR_T;
++
++typedef void (*VCHIQ_USERDATA_TERM_T)(void *userdata);
++
++typedef struct vchiq_bulk_struct {
++	short mode;
++	short dir;
++	void *userdata;
++	VCHI_MEM_HANDLE_T handle;
++	void *data;
++	int size;
++	void *remote_data;
++	int remote_size;
++	int actual;
++} VCHIQ_BULK_T;
++
++typedef struct vchiq_bulk_queue_struct {
++	int local_insert;  /* Where to insert the next local bulk */
++	int remote_insert; /* Where to insert the next remote bulk (master) */
++	int process;       /* Bulk to transfer next */
++	int remote_notify; /* Bulk to notify the remote client of next (mstr) */
++	int remove;        /* Bulk to notify the local client of, and remove,
++			   ** next */
++	VCHIQ_BULK_T bulks[VCHIQ_NUM_SERVICE_BULKS];
++} VCHIQ_BULK_QUEUE_T;
++
++typedef struct remote_event_struct {
++	int armed;
++	int fired;
++	struct semaphore *event;
++} REMOTE_EVENT_T;
++
++typedef struct opaque_platform_state_t *VCHIQ_PLATFORM_STATE_T;
++
++typedef struct vchiq_state_struct VCHIQ_STATE_T;
++
++typedef struct vchiq_slot_struct {
++	char data[VCHIQ_SLOT_SIZE];
++} VCHIQ_SLOT_T;
++
++typedef struct vchiq_slot_info_struct {
++	/* Use two counters rather than one to avoid the need for a mutex. */
++	short use_count;
++	short release_count;
++} VCHIQ_SLOT_INFO_T;
++
++typedef struct vchiq_service_struct {
++	VCHIQ_SERVICE_BASE_T base;
++	VCHIQ_SERVICE_HANDLE_T handle;
++	unsigned int ref_count;
++	int srvstate;
++	VCHIQ_USERDATA_TERM_T userdata_term;
++	unsigned int localport;
++	unsigned int remoteport;
++	int public_fourcc;
++	int client_id;
++	char auto_close;
++	char sync;
++	char closing;
++	atomic_t poll_flags;
++	short version;
++	short version_min;
++	short peer_version;
++
++	VCHIQ_STATE_T *state;
++	VCHIQ_INSTANCE_T instance;
++
++	int service_use_count;
++
++	VCHIQ_BULK_QUEUE_T bulk_tx;
++	VCHIQ_BULK_QUEUE_T bulk_rx;
++
++	struct semaphore remove_event;
++	struct semaphore bulk_remove_event;
++	struct mutex bulk_mutex;
++
++	struct service_stats_struct {
++		int quota_stalls;
++		int slot_stalls;
++		int bulk_stalls;
++		int error_count;
++		int ctrl_tx_count;
++		int ctrl_rx_count;
++		int bulk_tx_count;
++		int bulk_rx_count;
++		int bulk_aborted_count;
++		uint64_t ctrl_tx_bytes;
++		uint64_t ctrl_rx_bytes;
++		uint64_t bulk_tx_bytes;
++		uint64_t bulk_rx_bytes;
++	} stats;
++} VCHIQ_SERVICE_T;
++
++/* The quota information is outside VCHIQ_SERVICE_T so that it can be
++	statically allocated, since for accounting reasons a service's slot
++	usage is carried over between users of the same port number.
++ */
++typedef struct vchiq_service_quota_struct {
++	unsigned short slot_quota;
++	unsigned short slot_use_count;
++	unsigned short message_quota;
++	unsigned short message_use_count;
++	struct semaphore quota_event;
++	int previous_tx_index;
++} VCHIQ_SERVICE_QUOTA_T;
++
++typedef struct vchiq_shared_state_struct {
++
++	/* A non-zero value here indicates that the content is valid. */
++	int initialised;
++
++	/* The first and last (inclusive) slots allocated to the owner. */
++	int slot_first;
++	int slot_last;
++
++	/* The slot allocated to synchronous messages from the owner. */
++	int slot_sync;
++
++	/* Signalling this event indicates that owner's slot handler thread
++	** should run. */
++	REMOTE_EVENT_T trigger;
++
++	/* Indicates the byte position within the stream where the next message
++	** will be written. The least significant bits are an index into the
++	** slot. The next bits are the index of the slot in slot_queue. */
++	int tx_pos;
++
++	/* This event should be signalled when a slot is recycled. */
++	REMOTE_EVENT_T recycle;
++
++	/* The slot_queue index where the next recycled slot will be written. */
++	int slot_queue_recycle;
++
++	/* This event should be signalled when a synchronous message is sent. */
++	REMOTE_EVENT_T sync_trigger;
++
++	/* This event should be signalled when a synchronous message has been
++	** released. */
++	REMOTE_EVENT_T sync_release;
++
++	/* A circular buffer of slot indexes. */
++	int slot_queue[VCHIQ_MAX_SLOTS_PER_SIDE];
++
++	/* Debugging state */
++	int debug[DEBUG_MAX];
++} VCHIQ_SHARED_STATE_T;
++
++typedef struct vchiq_slot_zero_struct {
++	int magic;
++	short version;
++	short version_min;
++	int slot_zero_size;
++	int slot_size;
++	int max_slots;
++	int max_slots_per_side;
++	int platform_data[2];
++	VCHIQ_SHARED_STATE_T master;
++	VCHIQ_SHARED_STATE_T slave;
++	VCHIQ_SLOT_INFO_T slots[VCHIQ_MAX_SLOTS];
++} VCHIQ_SLOT_ZERO_T;
++
++struct vchiq_state_struct {
++	int id;
++	int initialised;
++	VCHIQ_CONNSTATE_T conn_state;
++	int is_master;
++
++	VCHIQ_SHARED_STATE_T *local;
++	VCHIQ_SHARED_STATE_T *remote;
++	VCHIQ_SLOT_T *slot_data;
++
++	unsigned short default_slot_quota;
++	unsigned short default_message_quota;
++
++	/* Event indicating connect message received */
++	struct semaphore connect;
++
++	/* Mutex protecting services */
++	struct mutex mutex;
++	VCHIQ_INSTANCE_T *instance;
++
++	/* Processes incoming messages */
++	struct task_struct *slot_handler_thread;
++
++	/* Processes recycled slots */
++	struct task_struct *recycle_thread;
++
++	/* Processes synchronous messages */
++	struct task_struct *sync_thread;
++
++	/* Local implementation of the trigger remote event */
++	struct semaphore trigger_event;
++
++	/* Local implementation of the recycle remote event */
++	struct semaphore recycle_event;
++
++	/* Local implementation of the sync trigger remote event */
++	struct semaphore sync_trigger_event;
++
++	/* Local implementation of the sync release remote event */
++	struct semaphore sync_release_event;
++
++	char *tx_data;
++	char *rx_data;
++	VCHIQ_SLOT_INFO_T *rx_info;
++
++	struct mutex slot_mutex;
++
++	struct mutex recycle_mutex;
++
++	struct mutex sync_mutex;
++
++	struct mutex bulk_transfer_mutex;
++
++	/* Indicates the byte position within the stream from where the next
++	** message will be read. The least significant bits are an index into
++	** the slot.The next bits are the index of the slot in
++	** remote->slot_queue. */
++	int rx_pos;
++
++	/* A cached copy of local->tx_pos. Only write to local->tx_pos, and read
++		from remote->tx_pos. */
++	int local_tx_pos;
++
++	/* The slot_queue index of the slot to become available next. */
++	int slot_queue_available;
++
++	/* A flag to indicate if any poll has been requested */
++	int poll_needed;
++
++	/* Ths index of the previous slot used for data messages. */
++	int previous_data_index;
++
++	/* The number of slots occupied by data messages. */
++	unsigned short data_use_count;
++
++	/* The maximum number of slots to be occupied by data messages. */
++	unsigned short data_quota;
++
++	/* An array of bit sets indicating which services must be polled. */
++	atomic_t poll_services[BITSET_SIZE(VCHIQ_MAX_SERVICES)];
++
++	/* The number of the first unused service */
++	int unused_service;
++
++	/* Signalled when a free slot becomes available. */
++	struct semaphore slot_available_event;
++
++	struct semaphore slot_remove_event;
++
++	/* Signalled when a free data slot becomes available. */
++	struct semaphore data_quota_event;
++
++	/* Incremented when there are bulk transfers which cannot be processed
++	 * whilst paused and must be processed on resume */
++	int deferred_bulks;
++
++	struct state_stats_struct {
++		int slot_stalls;
++		int data_stalls;
++		int ctrl_tx_count;
++		int ctrl_rx_count;
++		int error_count;
++	} stats;
++
++	VCHIQ_SERVICE_T * services[VCHIQ_MAX_SERVICES];
++	VCHIQ_SERVICE_QUOTA_T service_quotas[VCHIQ_MAX_SERVICES];
++	VCHIQ_SLOT_INFO_T slot_info[VCHIQ_MAX_SLOTS];
++
++	VCHIQ_PLATFORM_STATE_T platform_state;
++};
++
++struct bulk_waiter {
++	VCHIQ_BULK_T *bulk;
++	struct semaphore event;
++	int actual;
++};
++
++extern spinlock_t bulk_waiter_spinlock;
++
++extern int vchiq_core_log_level;
++extern int vchiq_core_msg_log_level;
++extern int vchiq_sync_log_level;
++
++extern VCHIQ_STATE_T *vchiq_states[VCHIQ_MAX_STATES];
++
++extern const char *
++get_conn_state_name(VCHIQ_CONNSTATE_T conn_state);
++
++extern VCHIQ_SLOT_ZERO_T *
++vchiq_init_slots(void *mem_base, int mem_size);
++
++extern VCHIQ_STATUS_T
++vchiq_init_state(VCHIQ_STATE_T *state, VCHIQ_SLOT_ZERO_T *slot_zero,
++	int is_master);
++
++extern VCHIQ_STATUS_T
++vchiq_connect_internal(VCHIQ_STATE_T *state, VCHIQ_INSTANCE_T instance);
++
++extern VCHIQ_SERVICE_T *
++vchiq_add_service_internal(VCHIQ_STATE_T *state,
++	const VCHIQ_SERVICE_PARAMS_T *params, int srvstate,
++	VCHIQ_INSTANCE_T instance, VCHIQ_USERDATA_TERM_T userdata_term);
++
++extern VCHIQ_STATUS_T
++vchiq_open_service_internal(VCHIQ_SERVICE_T *service, int client_id);
++
++extern VCHIQ_STATUS_T
++vchiq_close_service_internal(VCHIQ_SERVICE_T *service, int close_recvd);
++
++extern void
++vchiq_terminate_service_internal(VCHIQ_SERVICE_T *service);
++
++extern void
++vchiq_free_service_internal(VCHIQ_SERVICE_T *service);
++
++extern VCHIQ_STATUS_T
++vchiq_shutdown_internal(VCHIQ_STATE_T *state, VCHIQ_INSTANCE_T instance);
++
++extern VCHIQ_STATUS_T
++vchiq_pause_internal(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATUS_T
++vchiq_resume_internal(VCHIQ_STATE_T *state);
++
++extern void
++remote_event_pollall(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATUS_T
++vchiq_bulk_transfer(VCHIQ_SERVICE_HANDLE_T handle,
++	VCHI_MEM_HANDLE_T memhandle, void *offset, int size, void *userdata,
++	VCHIQ_BULK_MODE_T mode, VCHIQ_BULK_DIR_T dir);
++
++extern void
++vchiq_dump_state(void *dump_context, VCHIQ_STATE_T *state);
++
++extern void
++vchiq_dump_service_state(void *dump_context, VCHIQ_SERVICE_T *service);
++
++extern void
++vchiq_loud_error_header(void);
++
++extern void
++vchiq_loud_error_footer(void);
++
++extern void
++request_poll(VCHIQ_STATE_T *state, VCHIQ_SERVICE_T *service, int poll_type);
++
++static inline VCHIQ_SERVICE_T *
++handle_to_service(VCHIQ_SERVICE_HANDLE_T handle)
++{
++	VCHIQ_STATE_T *state = vchiq_states[(handle / VCHIQ_MAX_SERVICES) &
++		(VCHIQ_MAX_STATES - 1)];
++	if (!state)
++		return NULL;
++
++	return state->services[handle & (VCHIQ_MAX_SERVICES - 1)];
++}
++
++extern VCHIQ_SERVICE_T *
++find_service_by_handle(VCHIQ_SERVICE_HANDLE_T handle);
++
++extern VCHIQ_SERVICE_T *
++find_service_by_port(VCHIQ_STATE_T *state, int localport);
++
++extern VCHIQ_SERVICE_T *
++find_service_for_instance(VCHIQ_INSTANCE_T instance,
++	VCHIQ_SERVICE_HANDLE_T handle);
++
++extern VCHIQ_SERVICE_T *
++next_service_by_instance(VCHIQ_STATE_T *state, VCHIQ_INSTANCE_T instance,
++	int *pidx);
++
++extern void
++lock_service(VCHIQ_SERVICE_T *service);
++
++extern void
++unlock_service(VCHIQ_SERVICE_T *service);
++
++/* The following functions are called from vchiq_core, and external
++** implementations must be provided. */
++
++extern VCHIQ_STATUS_T
++vchiq_prepare_bulk_data(VCHIQ_BULK_T *bulk,
++	VCHI_MEM_HANDLE_T memhandle, void *offset, int size, int dir);
++
++extern void
++vchiq_transfer_bulk(VCHIQ_BULK_T *bulk);
++
++extern void
++vchiq_complete_bulk(VCHIQ_BULK_T *bulk);
++
++extern VCHIQ_STATUS_T
++vchiq_copy_from_user(void *dst, const void *src, int size);
++
++extern void
++remote_event_signal(REMOTE_EVENT_T *event);
++
++void
++vchiq_platform_check_suspend(VCHIQ_STATE_T *state);
++
++extern void
++vchiq_platform_paused(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATUS_T
++vchiq_platform_resume(VCHIQ_STATE_T *state);
++
++extern void
++vchiq_platform_resumed(VCHIQ_STATE_T *state);
++
++extern void
++vchiq_dump(void *dump_context, const char *str, int len);
++
++extern void
++vchiq_dump_platform_state(void *dump_context);
++
++extern void
++vchiq_dump_platform_instances(void *dump_context);
++
++extern void
++vchiq_dump_platform_service_state(void *dump_context,
++	VCHIQ_SERVICE_T *service);
++
++extern VCHIQ_STATUS_T
++vchiq_use_service_internal(VCHIQ_SERVICE_T *service);
++
++extern VCHIQ_STATUS_T
++vchiq_release_service_internal(VCHIQ_SERVICE_T *service);
++
++extern void
++vchiq_on_remote_use(VCHIQ_STATE_T *state);
++
++extern void
++vchiq_on_remote_release(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATUS_T
++vchiq_platform_init_state(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATUS_T
++vchiq_check_service(VCHIQ_SERVICE_T *service);
++
++extern void
++vchiq_on_remote_use_active(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATUS_T
++vchiq_send_remote_use(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATUS_T
++vchiq_send_remote_release(VCHIQ_STATE_T *state);
++
++extern VCHIQ_STATUS_T
++vchiq_send_remote_use_active(VCHIQ_STATE_T *state);
++
++extern void
++vchiq_platform_conn_state_changed(VCHIQ_STATE_T *state,
++	VCHIQ_CONNSTATE_T oldstate, VCHIQ_CONNSTATE_T newstate);
++
++extern void
++vchiq_platform_handle_timeout(VCHIQ_STATE_T *state);
++
++extern void
++vchiq_set_conn_state(VCHIQ_STATE_T *state, VCHIQ_CONNSTATE_T newstate);
++
++
++extern void
++vchiq_log_dump_mem(const char *label, uint32_t addr, const void *voidMem,
++	size_t numBytes);
++
++#endif
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_genversion linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_genversion
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_genversion	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_genversion	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,87 @@
++#!/usr/bin/perl -w
++
++use strict;
++
++#
++# Generate a version from available information
++#
++
++my $prefix = shift @ARGV;
++my $root = shift @ARGV;
++
++
++if ( not defined $root ) {
++	die "usage: $0 prefix root-dir\n";
++}
++
++if ( ! -d $root ) {
++	die "root directory $root not found\n";
++}
++
++my $version = "unknown";
++my $tainted = "";
++
++if ( -d "$root/.git" ) {
++	# attempt to work out git version. only do so
++	# on a linux build host, as cygwin builds are
++	# already slow enough
++
++	if ( -f "/usr/bin/git" || -f "/usr/local/bin/git" ) {
++		if (not open(F, "git --git-dir $root/.git rev-parse --verify HEAD|")) {
++			$version = "no git version";
++		}
++		else {
++			$version = <F>;
++			$version =~ s/[ \r\n]*$//;     # chomp may not be enough (cygwin).
++			$version =~ s/^[ \r\n]*//;     # chomp may not be enough (cygwin).
++		}
++
++		if (open(G, "git --git-dir $root/.git status --porcelain|")) {
++			$tainted = <G>;
++			$tainted =~ s/[ \r\n]*$//;     # chomp may not be enough (cygwin).
++			$tainted =~ s/^[ \r\n]*//;     # chomp may not be enough (cygwin).
++			if (length $tainted) {
++			$version = join ' ', $version, "(tainted)";
++		}
++		else {
++			$version = join ' ', $version, "(clean)";
++         }
++		}
++	}
++}
++
++my $hostname = `hostname`;
++$hostname =~ s/[ \r\n]*$//;     # chomp may not be enough (cygwin).
++$hostname =~ s/^[ \r\n]*//;     # chomp may not be enough (cygwin).
++
++
++print STDERR "Version $version\n";
++print <<EOF;
++#include "${prefix}_build_info.h"
++#include <linux/broadcom/vc_debug_sym.h>
++
++VC_DEBUG_DECLARE_STRING_VAR( ${prefix}_build_hostname, "$hostname" );
++VC_DEBUG_DECLARE_STRING_VAR( ${prefix}_build_version, "$version" );
++VC_DEBUG_DECLARE_STRING_VAR( ${prefix}_build_time,    __TIME__ );
++VC_DEBUG_DECLARE_STRING_VAR( ${prefix}_build_date,    __DATE__ );
++
++const char *vchiq_get_build_hostname( void )
++{
++   return vchiq_build_hostname;
++}
++
++const char *vchiq_get_build_version( void )
++{
++   return vchiq_build_version;
++}
++
++const char *vchiq_get_build_date( void )
++{
++   return vchiq_build_date;
++}
++
++const char *vchiq_get_build_time( void )
++{
++   return vchiq_build_time;
++}
++EOF
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq.h linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq.h
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq.h	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,40 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHIQ_VCHIQ_H
++#define VCHIQ_VCHIQ_H
++
++#include "vchiq_if.h"
++#include "vchiq_util.h"
++
++#endif
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_if.h linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_if.h
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_if.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_if.h	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,188 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHIQ_IF_H
++#define VCHIQ_IF_H
++
++#include "interface/vchi/vchi_mh.h"
++
++#define VCHIQ_SERVICE_HANDLE_INVALID 0
++
++#define VCHIQ_SLOT_SIZE     4096
++#define VCHIQ_MAX_MSG_SIZE  (VCHIQ_SLOT_SIZE - sizeof(VCHIQ_HEADER_T))
++#define VCHIQ_CHANNEL_SIZE  VCHIQ_MAX_MSG_SIZE /* For backwards compatibility */
++
++#define VCHIQ_MAKE_FOURCC(x0, x1, x2, x3) \
++			(((x0) << 24) | ((x1) << 16) | ((x2) << 8) | (x3))
++#define VCHIQ_GET_SERVICE_USERDATA(service) vchiq_get_service_userdata(service)
++#define VCHIQ_GET_SERVICE_FOURCC(service)   vchiq_get_service_fourcc(service)
++
++typedef enum {
++	VCHIQ_SERVICE_OPENED,         /* service, -, -             */
++	VCHIQ_SERVICE_CLOSED,         /* service, -, -             */
++	VCHIQ_MESSAGE_AVAILABLE,      /* service, header, -        */
++	VCHIQ_BULK_TRANSMIT_DONE,     /* service, -, bulk_userdata */
++	VCHIQ_BULK_RECEIVE_DONE,      /* service, -, bulk_userdata */
++	VCHIQ_BULK_TRANSMIT_ABORTED,  /* service, -, bulk_userdata */
++	VCHIQ_BULK_RECEIVE_ABORTED    /* service, -, bulk_userdata */
++} VCHIQ_REASON_T;
++
++typedef enum {
++	VCHIQ_ERROR   = -1,
++	VCHIQ_SUCCESS = 0,
++	VCHIQ_RETRY   = 1
++} VCHIQ_STATUS_T;
++
++typedef enum {
++	VCHIQ_BULK_MODE_CALLBACK,
++	VCHIQ_BULK_MODE_BLOCKING,
++	VCHIQ_BULK_MODE_NOCALLBACK,
++	VCHIQ_BULK_MODE_WAITING		/* Reserved for internal use */
++} VCHIQ_BULK_MODE_T;
++
++typedef enum {
++	VCHIQ_SERVICE_OPTION_AUTOCLOSE,
++	VCHIQ_SERVICE_OPTION_SLOT_QUOTA,
++	VCHIQ_SERVICE_OPTION_MESSAGE_QUOTA,
++	VCHIQ_SERVICE_OPTION_SYNCHRONOUS
++} VCHIQ_SERVICE_OPTION_T;
++
++typedef struct vchiq_header_struct {
++	/* The message identifier - opaque to applications. */
++	int msgid;
++
++	/* Size of message data. */
++	unsigned int size;
++
++	char data[0];           /* message */
++} VCHIQ_HEADER_T;
++
++typedef struct {
++	const void *data;
++	unsigned int size;
++} VCHIQ_ELEMENT_T;
++
++typedef unsigned int VCHIQ_SERVICE_HANDLE_T;
++
++typedef VCHIQ_STATUS_T (*VCHIQ_CALLBACK_T)(VCHIQ_REASON_T, VCHIQ_HEADER_T *,
++	VCHIQ_SERVICE_HANDLE_T, void *);
++
++typedef struct vchiq_service_base_struct {
++	int fourcc;
++	VCHIQ_CALLBACK_T callback;
++	void *userdata;
++} VCHIQ_SERVICE_BASE_T;
++
++typedef struct vchiq_service_params_struct {
++	int fourcc;
++	VCHIQ_CALLBACK_T callback;
++	void *userdata;
++	short version;       /* Increment for non-trivial changes */
++	short version_min;   /* Update for incompatible changes */
++} VCHIQ_SERVICE_PARAMS_T;
++
++typedef struct vchiq_config_struct {
++	unsigned int max_msg_size;
++	unsigned int bulk_threshold; /* The message size above which it
++					is better to use a bulk transfer
++					(<= max_msg_size) */
++	unsigned int max_outstanding_bulks;
++	unsigned int max_services;
++	short version;      /* The version of VCHIQ */
++	short version_min;  /* The minimum compatible version of VCHIQ */
++} VCHIQ_CONFIG_T;
++
++typedef struct vchiq_instance_struct *VCHIQ_INSTANCE_T;
++typedef void (*VCHIQ_REMOTE_USE_CALLBACK_T)(void *cb_arg);
++
++extern VCHIQ_STATUS_T vchiq_initialise(VCHIQ_INSTANCE_T *pinstance);
++extern VCHIQ_STATUS_T vchiq_shutdown(VCHIQ_INSTANCE_T instance);
++extern VCHIQ_STATUS_T vchiq_connect(VCHIQ_INSTANCE_T instance);
++extern VCHIQ_STATUS_T vchiq_add_service(VCHIQ_INSTANCE_T instance,
++	const VCHIQ_SERVICE_PARAMS_T *params,
++	VCHIQ_SERVICE_HANDLE_T *pservice);
++extern VCHIQ_STATUS_T vchiq_open_service(VCHIQ_INSTANCE_T instance,
++	const VCHIQ_SERVICE_PARAMS_T *params,
++	VCHIQ_SERVICE_HANDLE_T *pservice);
++extern VCHIQ_STATUS_T vchiq_close_service(VCHIQ_SERVICE_HANDLE_T service);
++extern VCHIQ_STATUS_T vchiq_remove_service(VCHIQ_SERVICE_HANDLE_T service);
++extern VCHIQ_STATUS_T vchiq_use_service(VCHIQ_SERVICE_HANDLE_T service);
++extern VCHIQ_STATUS_T vchiq_use_service_no_resume(
++	VCHIQ_SERVICE_HANDLE_T service);
++extern VCHIQ_STATUS_T vchiq_release_service(VCHIQ_SERVICE_HANDLE_T service);
++
++extern VCHIQ_STATUS_T vchiq_queue_message(VCHIQ_SERVICE_HANDLE_T service,
++	const VCHIQ_ELEMENT_T *elements, unsigned int count);
++extern void           vchiq_release_message(VCHIQ_SERVICE_HANDLE_T service,
++	VCHIQ_HEADER_T *header);
++extern VCHIQ_STATUS_T vchiq_queue_bulk_transmit(VCHIQ_SERVICE_HANDLE_T service,
++	const void *data, unsigned int size, void *userdata);
++extern VCHIQ_STATUS_T vchiq_queue_bulk_receive(VCHIQ_SERVICE_HANDLE_T service,
++	void *data, unsigned int size, void *userdata);
++extern VCHIQ_STATUS_T vchiq_queue_bulk_transmit_handle(
++	VCHIQ_SERVICE_HANDLE_T service, VCHI_MEM_HANDLE_T handle,
++	const void *offset, unsigned int size, void *userdata);
++extern VCHIQ_STATUS_T vchiq_queue_bulk_receive_handle(
++	VCHIQ_SERVICE_HANDLE_T service, VCHI_MEM_HANDLE_T handle,
++	void *offset, unsigned int size, void *userdata);
++extern VCHIQ_STATUS_T vchiq_bulk_transmit(VCHIQ_SERVICE_HANDLE_T service,
++	const void *data, unsigned int size, void *userdata,
++	VCHIQ_BULK_MODE_T mode);
++extern VCHIQ_STATUS_T vchiq_bulk_receive(VCHIQ_SERVICE_HANDLE_T service,
++	void *data, unsigned int size, void *userdata,
++	VCHIQ_BULK_MODE_T mode);
++extern VCHIQ_STATUS_T vchiq_bulk_transmit_handle(VCHIQ_SERVICE_HANDLE_T service,
++	VCHI_MEM_HANDLE_T handle, const void *offset, unsigned int size,
++	void *userdata,	VCHIQ_BULK_MODE_T mode);
++extern VCHIQ_STATUS_T vchiq_bulk_receive_handle(VCHIQ_SERVICE_HANDLE_T service,
++	VCHI_MEM_HANDLE_T handle, void *offset, unsigned int size,
++	void *userdata, VCHIQ_BULK_MODE_T mode);
++extern int   vchiq_get_client_id(VCHIQ_SERVICE_HANDLE_T service);
++extern void *vchiq_get_service_userdata(VCHIQ_SERVICE_HANDLE_T service);
++extern int   vchiq_get_service_fourcc(VCHIQ_SERVICE_HANDLE_T service);
++extern VCHIQ_STATUS_T vchiq_get_config(VCHIQ_INSTANCE_T instance,
++	int config_size, VCHIQ_CONFIG_T *pconfig);
++extern VCHIQ_STATUS_T vchiq_set_service_option(VCHIQ_SERVICE_HANDLE_T service,
++	VCHIQ_SERVICE_OPTION_T option, int value);
++
++extern VCHIQ_STATUS_T vchiq_remote_use(VCHIQ_INSTANCE_T instance,
++	VCHIQ_REMOTE_USE_CALLBACK_T callback, void *cb_arg);
++extern VCHIQ_STATUS_T vchiq_remote_release(VCHIQ_INSTANCE_T instance);
++
++extern VCHIQ_STATUS_T vchiq_dump_phys_mem(VCHIQ_SERVICE_HANDLE_T service,
++	void *ptr, size_t num_bytes);
++
++extern VCHIQ_STATUS_T vchiq_get_peer_version(VCHIQ_SERVICE_HANDLE_T handle,
++      short *peer_version);
++
++#endif /* VCHIQ_IF_H */
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_ioctl.h linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_ioctl.h
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_ioctl.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_ioctl.h	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,129 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHIQ_IOCTLS_H
++#define VCHIQ_IOCTLS_H
++
++#include <linux/ioctl.h>
++#include "vchiq_if.h"
++
++#define VCHIQ_IOC_MAGIC 0xc4
++#define VCHIQ_INVALID_HANDLE (~0)
++
++typedef struct {
++	VCHIQ_SERVICE_PARAMS_T params;
++	int is_open;
++	int is_vchi;
++	unsigned int handle;       /* OUT */
++} VCHIQ_CREATE_SERVICE_T;
++
++typedef struct {
++	unsigned int handle;
++	unsigned int count;
++	const VCHIQ_ELEMENT_T *elements;
++} VCHIQ_QUEUE_MESSAGE_T;
++
++typedef struct {
++	unsigned int handle;
++	void *data;
++	unsigned int size;
++	void *userdata;
++	VCHIQ_BULK_MODE_T mode;
++} VCHIQ_QUEUE_BULK_TRANSFER_T;
++
++typedef struct {
++	VCHIQ_REASON_T reason;
++	VCHIQ_HEADER_T *header;
++	void *service_userdata;
++	void *bulk_userdata;
++} VCHIQ_COMPLETION_DATA_T;
++
++typedef struct {
++	unsigned int count;
++	VCHIQ_COMPLETION_DATA_T *buf;
++	unsigned int msgbufsize;
++	unsigned int msgbufcount; /* IN/OUT */
++	void **msgbufs;
++} VCHIQ_AWAIT_COMPLETION_T;
++
++typedef struct {
++	unsigned int handle;
++	int blocking;
++	unsigned int bufsize;
++	void *buf;
++} VCHIQ_DEQUEUE_MESSAGE_T;
++
++typedef struct {
++	unsigned int config_size;
++	VCHIQ_CONFIG_T *pconfig;
++} VCHIQ_GET_CONFIG_T;
++
++typedef struct {
++	unsigned int handle;
++	VCHIQ_SERVICE_OPTION_T option;
++	int value;
++} VCHIQ_SET_SERVICE_OPTION_T;
++
++typedef struct {
++	void     *virt_addr;
++	size_t    num_bytes;
++} VCHIQ_DUMP_MEM_T;
++
++#define VCHIQ_IOC_CONNECT              _IO(VCHIQ_IOC_MAGIC,   0)
++#define VCHIQ_IOC_SHUTDOWN             _IO(VCHIQ_IOC_MAGIC,   1)
++#define VCHIQ_IOC_CREATE_SERVICE \
++	_IOWR(VCHIQ_IOC_MAGIC, 2, VCHIQ_CREATE_SERVICE_T)
++#define VCHIQ_IOC_REMOVE_SERVICE       _IO(VCHIQ_IOC_MAGIC,   3)
++#define VCHIQ_IOC_QUEUE_MESSAGE \
++	_IOW(VCHIQ_IOC_MAGIC,  4, VCHIQ_QUEUE_MESSAGE_T)
++#define VCHIQ_IOC_QUEUE_BULK_TRANSMIT \
++	_IOWR(VCHIQ_IOC_MAGIC, 5, VCHIQ_QUEUE_BULK_TRANSFER_T)
++#define VCHIQ_IOC_QUEUE_BULK_RECEIVE \
++	_IOWR(VCHIQ_IOC_MAGIC, 6, VCHIQ_QUEUE_BULK_TRANSFER_T)
++#define VCHIQ_IOC_AWAIT_COMPLETION \
++	_IOWR(VCHIQ_IOC_MAGIC, 7, VCHIQ_AWAIT_COMPLETION_T)
++#define VCHIQ_IOC_DEQUEUE_MESSAGE \
++	_IOWR(VCHIQ_IOC_MAGIC, 8, VCHIQ_DEQUEUE_MESSAGE_T)
++#define VCHIQ_IOC_GET_CLIENT_ID        _IO(VCHIQ_IOC_MAGIC,   9)
++#define VCHIQ_IOC_GET_CONFIG \
++	_IOWR(VCHIQ_IOC_MAGIC, 10, VCHIQ_GET_CONFIG_T)
++#define VCHIQ_IOC_CLOSE_SERVICE        _IO(VCHIQ_IOC_MAGIC,   11)
++#define VCHIQ_IOC_USE_SERVICE          _IO(VCHIQ_IOC_MAGIC,   12)
++#define VCHIQ_IOC_RELEASE_SERVICE      _IO(VCHIQ_IOC_MAGIC,   13)
++#define VCHIQ_IOC_SET_SERVICE_OPTION \
++	_IOW(VCHIQ_IOC_MAGIC,  14, VCHIQ_SET_SERVICE_OPTION_T)
++#define VCHIQ_IOC_DUMP_PHYS_MEM \
++	_IOW(VCHIQ_IOC_MAGIC,  15, VCHIQ_DUMP_MEM_T)
++#define VCHIQ_IOC_MAX                  15
++
++#endif
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_kern_lib.c linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_kern_lib.c
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_kern_lib.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_kern_lib.c	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,456 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++/* ---- Include Files ---------------------------------------------------- */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/mutex.h>
++
++#include "vchiq_core.h"
++#include "vchiq_arm.h"
++
++/* ---- Public Variables ------------------------------------------------- */
++
++/* ---- Private Constants and Types -------------------------------------- */
++
++struct bulk_waiter_node {
++	struct bulk_waiter bulk_waiter;
++	int pid;
++	struct list_head list;
++};
++
++struct vchiq_instance_struct {
++	VCHIQ_STATE_T *state;
++
++	int connected;
++
++	struct list_head bulk_waiter_list;
++	struct mutex bulk_waiter_list_mutex;
++};
++
++static VCHIQ_STATUS_T
++vchiq_blocking_bulk_transfer(VCHIQ_SERVICE_HANDLE_T handle, void *data,
++	unsigned int size, VCHIQ_BULK_DIR_T dir);
++
++/****************************************************************************
++*
++*   vchiq_initialise
++*
++***************************************************************************/
++#define VCHIQ_INIT_RETRIES 10
++VCHIQ_STATUS_T vchiq_initialise(VCHIQ_INSTANCE_T *instanceOut)
++{
++	VCHIQ_STATUS_T status = VCHIQ_ERROR;
++	VCHIQ_STATE_T *state;
++	VCHIQ_INSTANCE_T instance = NULL;
++        int i;
++
++	vchiq_log_trace(vchiq_core_log_level, "%s called", __func__);
++
++        /* VideoCore may not be ready due to boot up timing.
++           It may never be ready if kernel and firmware are mismatched, so don't block forever. */
++        for (i=0; i<VCHIQ_INIT_RETRIES; i++) {
++		state = vchiq_get_state();
++		if (state)
++			break;
++		udelay(500);
++	}
++	if (i==VCHIQ_INIT_RETRIES) {
++		vchiq_log_error(vchiq_core_log_level,
++			"%s: videocore not initialized\n", __func__);
++		goto failed;
++	} else if (i>0) {
++		vchiq_log_warning(vchiq_core_log_level,
++			"%s: videocore initialized after %d retries\n", __func__, i);
++	}
++
++	instance = kzalloc(sizeof(*instance), GFP_KERNEL);
++	if (!instance) {
++		vchiq_log_error(vchiq_core_log_level,
++			"%s: error allocating vchiq instance\n", __func__);
++		goto failed;
++	}
++
++	instance->connected = 0;
++	instance->state = state;
++	mutex_init(&instance->bulk_waiter_list_mutex);
++	INIT_LIST_HEAD(&instance->bulk_waiter_list);
++
++	*instanceOut = instance;
++
++	status = VCHIQ_SUCCESS;
++
++failed:
++	vchiq_log_trace(vchiq_core_log_level,
++		"%s(%p): returning %d", __func__, instance, status);
++
++	return status;
++}
++EXPORT_SYMBOL(vchiq_initialise);
++
++/****************************************************************************
++*
++*   vchiq_shutdown
++*
++***************************************************************************/
++
++VCHIQ_STATUS_T vchiq_shutdown(VCHIQ_INSTANCE_T instance)
++{
++	VCHIQ_STATUS_T status;
++	VCHIQ_STATE_T *state = instance->state;
++
++	vchiq_log_trace(vchiq_core_log_level,
++		"%s(%p) called", __func__, instance);
++
++	if (mutex_lock_interruptible(&state->mutex) != 0)
++		return VCHIQ_RETRY;
++
++	/* Remove all services */
++	status = vchiq_shutdown_internal(state, instance);
++
++	mutex_unlock(&state->mutex);
++
++	vchiq_log_trace(vchiq_core_log_level,
++		"%s(%p): returning %d", __func__, instance, status);
++
++	if (status == VCHIQ_SUCCESS) {
++		struct list_head *pos, *next;
++		list_for_each_safe(pos, next,
++				&instance->bulk_waiter_list) {
++			struct bulk_waiter_node *waiter;
++			waiter = list_entry(pos,
++					struct bulk_waiter_node,
++					list);
++			list_del(pos);
++			vchiq_log_info(vchiq_arm_log_level,
++					"bulk_waiter - cleaned up %x "
++					"for pid %d",
++					(unsigned int)waiter, waiter->pid);
++			kfree(waiter);
++		}
++		kfree(instance);
++	}
++
++	return status;
++}
++EXPORT_SYMBOL(vchiq_shutdown);
++
++/****************************************************************************
++*
++*   vchiq_is_connected
++*
++***************************************************************************/
++
++int vchiq_is_connected(VCHIQ_INSTANCE_T instance)
++{
++	return instance->connected;
++}
++
++/****************************************************************************
++*
++*   vchiq_connect
++*
++***************************************************************************/
++
++VCHIQ_STATUS_T vchiq_connect(VCHIQ_INSTANCE_T instance)
++{
++	VCHIQ_STATUS_T status;
++	VCHIQ_STATE_T *state = instance->state;
++
++	vchiq_log_trace(vchiq_core_log_level,
++		"%s(%p) called", __func__, instance);
++
++	if (mutex_lock_interruptible(&state->mutex) != 0) {
++		vchiq_log_trace(vchiq_core_log_level,
++			"%s: call to mutex_lock failed", __func__);
++		status = VCHIQ_RETRY;
++		goto failed;
++	}
++	status = vchiq_connect_internal(state, instance);
++
++	if (status == VCHIQ_SUCCESS)
++		instance->connected = 1;
++
++	mutex_unlock(&state->mutex);
++
++failed:
++	vchiq_log_trace(vchiq_core_log_level,
++		"%s(%p): returning %d", __func__, instance, status);
++
++	return status;
++}
++EXPORT_SYMBOL(vchiq_connect);
++
++/****************************************************************************
++*
++*   vchiq_add_service
++*
++***************************************************************************/
++
++VCHIQ_STATUS_T vchiq_add_service(
++	VCHIQ_INSTANCE_T              instance,
++	const VCHIQ_SERVICE_PARAMS_T *params,
++	VCHIQ_SERVICE_HANDLE_T       *phandle)
++{
++	VCHIQ_STATUS_T status;
++	VCHIQ_STATE_T *state = instance->state;
++	VCHIQ_SERVICE_T *service = NULL;
++	int srvstate;
++
++	vchiq_log_trace(vchiq_core_log_level,
++		"%s(%p) called", __func__, instance);
++
++	*phandle = VCHIQ_SERVICE_HANDLE_INVALID;
++
++	srvstate = vchiq_is_connected(instance)
++		? VCHIQ_SRVSTATE_LISTENING
++		: VCHIQ_SRVSTATE_HIDDEN;
++
++	service = vchiq_add_service_internal(
++		state,
++		params,
++		srvstate,
++		instance,
++		NULL);
++
++	if (service) {
++		*phandle = service->handle;
++		status = VCHIQ_SUCCESS;
++	} else
++		status = VCHIQ_ERROR;
++
++	vchiq_log_trace(vchiq_core_log_level,
++		"%s(%p): returning %d", __func__, instance, status);
++
++	return status;
++}
++EXPORT_SYMBOL(vchiq_add_service);
++
++/****************************************************************************
++*
++*   vchiq_open_service
++*
++***************************************************************************/
++
++VCHIQ_STATUS_T vchiq_open_service(
++	VCHIQ_INSTANCE_T              instance,
++	const VCHIQ_SERVICE_PARAMS_T *params,
++	VCHIQ_SERVICE_HANDLE_T       *phandle)
++{
++	VCHIQ_STATUS_T   status = VCHIQ_ERROR;
++	VCHIQ_STATE_T   *state = instance->state;
++	VCHIQ_SERVICE_T *service = NULL;
++
++	vchiq_log_trace(vchiq_core_log_level,
++		"%s(%p) called", __func__, instance);
++
++	*phandle = VCHIQ_SERVICE_HANDLE_INVALID;
++
++	if (!vchiq_is_connected(instance))
++		goto failed;
++
++	service = vchiq_add_service_internal(state,
++		params,
++		VCHIQ_SRVSTATE_OPENING,
++		instance,
++		NULL);
++
++	if (service) {
++		status = vchiq_open_service_internal(service, current->pid);
++		if (status == VCHIQ_SUCCESS)
++			*phandle = service->handle;
++		else
++			vchiq_remove_service(service->handle);
++	}
++
++failed:
++	vchiq_log_trace(vchiq_core_log_level,
++		"%s(%p): returning %d", __func__, instance, status);
++
++	return status;
++}
++EXPORT_SYMBOL(vchiq_open_service);
++
++VCHIQ_STATUS_T
++vchiq_queue_bulk_transmit(VCHIQ_SERVICE_HANDLE_T handle,
++	const void *data, unsigned int size, void *userdata)
++{
++	return vchiq_bulk_transfer(handle,
++		VCHI_MEM_HANDLE_INVALID, (void *)data, size, userdata,
++		VCHIQ_BULK_MODE_CALLBACK, VCHIQ_BULK_TRANSMIT);
++}
++EXPORT_SYMBOL(vchiq_queue_bulk_transmit);
++
++VCHIQ_STATUS_T
++vchiq_queue_bulk_receive(VCHIQ_SERVICE_HANDLE_T handle, void *data,
++	unsigned int size, void *userdata)
++{
++	return vchiq_bulk_transfer(handle,
++		VCHI_MEM_HANDLE_INVALID, data, size, userdata,
++		VCHIQ_BULK_MODE_CALLBACK, VCHIQ_BULK_RECEIVE);
++}
++EXPORT_SYMBOL(vchiq_queue_bulk_receive);
++
++VCHIQ_STATUS_T
++vchiq_bulk_transmit(VCHIQ_SERVICE_HANDLE_T handle, const void *data,
++	unsigned int size, void *userdata, VCHIQ_BULK_MODE_T mode)
++{
++	VCHIQ_STATUS_T status;
++
++	switch (mode) {
++	case VCHIQ_BULK_MODE_NOCALLBACK:
++	case VCHIQ_BULK_MODE_CALLBACK:
++		status = vchiq_bulk_transfer(handle,
++			VCHI_MEM_HANDLE_INVALID, (void *)data, size, userdata,
++			mode, VCHIQ_BULK_TRANSMIT);
++		break;
++	case VCHIQ_BULK_MODE_BLOCKING:
++		status = vchiq_blocking_bulk_transfer(handle,
++			(void *)data, size, VCHIQ_BULK_TRANSMIT);
++		break;
++	default:
++		return VCHIQ_ERROR;
++	}
++
++	return status;
++}
++EXPORT_SYMBOL(vchiq_bulk_transmit);
++
++VCHIQ_STATUS_T
++vchiq_bulk_receive(VCHIQ_SERVICE_HANDLE_T handle, void *data,
++	unsigned int size, void *userdata, VCHIQ_BULK_MODE_T mode)
++{
++	VCHIQ_STATUS_T status;
++
++	switch (mode) {
++	case VCHIQ_BULK_MODE_NOCALLBACK:
++	case VCHIQ_BULK_MODE_CALLBACK:
++		status = vchiq_bulk_transfer(handle,
++			VCHI_MEM_HANDLE_INVALID, data, size, userdata,
++			mode, VCHIQ_BULK_RECEIVE);
++		break;
++	case VCHIQ_BULK_MODE_BLOCKING:
++		status = vchiq_blocking_bulk_transfer(handle,
++			(void *)data, size, VCHIQ_BULK_RECEIVE);
++		break;
++	default:
++		return VCHIQ_ERROR;
++	}
++
++	return status;
++}
++EXPORT_SYMBOL(vchiq_bulk_receive);
++
++static VCHIQ_STATUS_T
++vchiq_blocking_bulk_transfer(VCHIQ_SERVICE_HANDLE_T handle, void *data,
++	unsigned int size, VCHIQ_BULK_DIR_T dir)
++{
++	VCHIQ_INSTANCE_T instance;
++	VCHIQ_SERVICE_T *service;
++	VCHIQ_STATUS_T status;
++	struct bulk_waiter_node *waiter = NULL;
++	struct list_head *pos;
++
++	service = find_service_by_handle(handle);
++	if (!service)
++		return VCHIQ_ERROR;
++
++	instance = service->instance;
++
++	unlock_service(service);
++
++	mutex_lock(&instance->bulk_waiter_list_mutex);
++	list_for_each(pos, &instance->bulk_waiter_list) {
++		if (list_entry(pos, struct bulk_waiter_node,
++				list)->pid == current->pid) {
++			waiter = list_entry(pos,
++				struct bulk_waiter_node,
++				list);
++			list_del(pos);
++			break;
++		}
++	}
++	mutex_unlock(&instance->bulk_waiter_list_mutex);
++
++	if (waiter) {
++		VCHIQ_BULK_T *bulk = waiter->bulk_waiter.bulk;
++		if (bulk) {
++			/* This thread has an outstanding bulk transfer. */
++			if ((bulk->data != data) ||
++				(bulk->size != size)) {
++				/* This is not a retry of the previous one.
++				** Cancel the signal when the transfer
++				** completes. */
++				spin_lock(&bulk_waiter_spinlock);
++				bulk->userdata = NULL;
++				spin_unlock(&bulk_waiter_spinlock);
++			}
++		}
++	}
++
++	if (!waiter) {
++		waiter = kzalloc(sizeof(struct bulk_waiter_node), GFP_KERNEL);
++		if (!waiter) {
++			vchiq_log_error(vchiq_core_log_level,
++				"%s - out of memory", __func__);
++			return VCHIQ_ERROR;
++		}
++	}
++
++	status = vchiq_bulk_transfer(handle, VCHI_MEM_HANDLE_INVALID,
++		data, size, &waiter->bulk_waiter, VCHIQ_BULK_MODE_BLOCKING,
++		dir);
++	if ((status != VCHIQ_RETRY) || fatal_signal_pending(current) ||
++		!waiter->bulk_waiter.bulk) {
++		VCHIQ_BULK_T *bulk = waiter->bulk_waiter.bulk;
++		if (bulk) {
++			/* Cancel the signal when the transfer
++			 ** completes. */
++			spin_lock(&bulk_waiter_spinlock);
++			bulk->userdata = NULL;
++			spin_unlock(&bulk_waiter_spinlock);
++		}
++		kfree(waiter);
++	} else {
++		waiter->pid = current->pid;
++		mutex_lock(&instance->bulk_waiter_list_mutex);
++		list_add(&waiter->list, &instance->bulk_waiter_list);
++		mutex_unlock(&instance->bulk_waiter_list_mutex);
++		vchiq_log_info(vchiq_arm_log_level,
++				"saved bulk_waiter %x for pid %d",
++				(unsigned int)waiter, current->pid);
++	}
++
++	return status;
++}
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_memdrv.h linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_memdrv.h
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_memdrv.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_memdrv.h	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,71 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHIQ_MEMDRV_H
++#define VCHIQ_MEMDRV_H
++
++/* ---- Include Files ----------------------------------------------------- */
++
++#include <linux/kernel.h>
++#include "vchiq_if.h"
++
++/* ---- Constants and Types ---------------------------------------------- */
++
++typedef struct {
++	 void                   *armSharedMemVirt;
++	 dma_addr_t              armSharedMemPhys;
++	 size_t                  armSharedMemSize;
++
++	 void                   *vcSharedMemVirt;
++	 dma_addr_t              vcSharedMemPhys;
++	 size_t                  vcSharedMemSize;
++} VCHIQ_SHARED_MEM_INFO_T;
++
++/* ---- Variable Externs ------------------------------------------------- */
++
++/* ---- Function Prototypes ---------------------------------------------- */
++
++void vchiq_get_shared_mem_info(VCHIQ_SHARED_MEM_INFO_T *info);
++
++VCHIQ_STATUS_T vchiq_memdrv_initialise(void);
++
++VCHIQ_STATUS_T vchiq_userdrv_create_instance(
++	const VCHIQ_PLATFORM_DATA_T * platform_data);
++
++VCHIQ_STATUS_T vchiq_userdrv_suspend(
++	const VCHIQ_PLATFORM_DATA_T * platform_data);
++
++VCHIQ_STATUS_T vchiq_userdrv_resume(
++	const VCHIQ_PLATFORM_DATA_T * platform_data);
++
++#endif
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_pagelist.h linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_pagelist.h
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_pagelist.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_pagelist.h	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,58 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHIQ_PAGELIST_H
++#define VCHIQ_PAGELIST_H
++
++#ifndef PAGE_SIZE
++#define PAGE_SIZE 4096
++#endif
++#define CACHE_LINE_SIZE 32
++#define PAGELIST_WRITE 0
++#define PAGELIST_READ 1
++#define PAGELIST_READ_WITH_FRAGMENTS 2
++
++typedef struct pagelist_struct {
++	unsigned long length;
++	unsigned short type;
++	unsigned short offset;
++	unsigned long addrs[1];	/* N.B. 12 LSBs hold the number of following
++				   pages at consecutive addresses. */
++} PAGELIST_T;
++
++typedef struct fragments_struct {
++	char headbuf[CACHE_LINE_SIZE];
++	char tailbuf[CACHE_LINE_SIZE];
++} FRAGMENTS_T;
++
++#endif /* VCHIQ_PAGELIST_H */
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_proc.c linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_proc.c
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_proc.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_proc.c	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,253 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++
++#include <linux/proc_fs.h>
++#include "vchiq_core.h"
++#include "vchiq_arm.h"
++
++#if 1
++
++int vchiq_proc_init(void)
++{
++	return 0;
++}
++
++void vchiq_proc_deinit(void)
++{
++}
++
++#else
++
++struct vchiq_proc_info {
++	/* Global 'vc' proc entry used by all instances */
++	struct proc_dir_entry *vc_cfg_dir;
++
++	/* one entry per client process */
++	struct proc_dir_entry *clients;
++
++	/* log categories */
++	struct proc_dir_entry *log_categories;
++};
++
++static struct vchiq_proc_info proc_info;
++
++struct proc_dir_entry *vchiq_proc_top(void)
++{
++	BUG_ON(proc_info.vc_cfg_dir == NULL);
++	return proc_info.vc_cfg_dir;
++}
++
++/****************************************************************************
++*
++*   log category entries
++*
++***************************************************************************/
++#define PROC_WRITE_BUF_SIZE 256
++
++#define VCHIQ_LOG_ERROR_STR   "error"
++#define VCHIQ_LOG_WARNING_STR "warning"
++#define VCHIQ_LOG_INFO_STR    "info"
++#define VCHIQ_LOG_TRACE_STR   "trace"
++
++static int log_cfg_read(char *buffer,
++	char **start,
++	off_t off,
++	int count,
++	int *eof,
++	void *data)
++{
++	int len = 0;
++	char *log_value = NULL;
++
++	switch (*((int *)data)) {
++	case VCHIQ_LOG_ERROR:
++		log_value = VCHIQ_LOG_ERROR_STR;
++		break;
++	case VCHIQ_LOG_WARNING:
++		log_value = VCHIQ_LOG_WARNING_STR;
++		break;
++	case VCHIQ_LOG_INFO:
++		log_value = VCHIQ_LOG_INFO_STR;
++		break;
++	case VCHIQ_LOG_TRACE:
++		log_value = VCHIQ_LOG_TRACE_STR;
++		break;
++	default:
++		break;
++	}
++
++	len += sprintf(buffer + len,
++		"%s\n",
++		log_value ? log_value : "(null)");
++
++	return len;
++}
++
++
++static int log_cfg_write(struct file *file,
++	const char __user *buffer,
++	unsigned long count,
++	void *data)
++{
++	int *log_module = data;
++	char kbuf[PROC_WRITE_BUF_SIZE + 1];
++
++	(void)file;
++
++	memset(kbuf, 0, PROC_WRITE_BUF_SIZE + 1);
++	if (count >= PROC_WRITE_BUF_SIZE)
++		count = PROC_WRITE_BUF_SIZE;
++
++	if (copy_from_user(kbuf,
++		buffer,
++		count) != 0)
++		return -EFAULT;
++	kbuf[count - 1] = 0;
++
++	if (strncmp("error", kbuf, strlen("error")) == 0)
++		*log_module = VCHIQ_LOG_ERROR;
++	else if (strncmp("warning", kbuf, strlen("warning")) == 0)
++		*log_module = VCHIQ_LOG_WARNING;
++	else if (strncmp("info", kbuf, strlen("info")) == 0)
++		*log_module = VCHIQ_LOG_INFO;
++	else if (strncmp("trace", kbuf, strlen("trace")) == 0)
++		*log_module = VCHIQ_LOG_TRACE;
++	else
++		*log_module = VCHIQ_LOG_DEFAULT;
++
++	return count;
++}
++
++/* Log category proc entries */
++struct vchiq_proc_log_entry {
++	const char *name;
++	int *plevel;
++	struct proc_dir_entry *dir;
++};
++
++static struct vchiq_proc_log_entry vchiq_proc_log_entries[] = {
++	{ "core", &vchiq_core_log_level },
++	{ "msg",  &vchiq_core_msg_log_level },
++	{ "sync", &vchiq_sync_log_level },
++	{ "susp", &vchiq_susp_log_level },
++	{ "arm",  &vchiq_arm_log_level },
++};
++static int n_log_entries =
++	sizeof(vchiq_proc_log_entries)/sizeof(vchiq_proc_log_entries[0]);
++
++/* create an entry under /proc/vc/log for each log category */
++static int vchiq_proc_create_log_entries(struct proc_dir_entry *top)
++{
++	struct proc_dir_entry *dir;
++	size_t i;
++	int ret = 0;
++	dir = proc_mkdir("log", proc_info.vc_cfg_dir);
++	if (!dir)
++		return -ENOMEM;
++	proc_info.log_categories = dir;
++
++	for (i = 0; i < n_log_entries; i++) {
++		dir = create_proc_entry(vchiq_proc_log_entries[i].name,
++					0644,
++					proc_info.log_categories);
++		if (!dir) {
++			ret = -ENOMEM;
++			break;
++		}
++
++		dir->read_proc = &log_cfg_read;
++		dir->write_proc = &log_cfg_write;
++		dir->data = (void *)vchiq_proc_log_entries[i].plevel;
++
++		vchiq_proc_log_entries[i].dir = dir;
++	}
++	return ret;
++}
++
++
++int vchiq_proc_init(void)
++{
++	BUG_ON(proc_info.vc_cfg_dir != NULL);
++
++	proc_info.vc_cfg_dir = proc_mkdir("vc", NULL);
++	if (proc_info.vc_cfg_dir == NULL)
++		goto fail;
++
++	proc_info.clients = proc_mkdir("clients",
++				proc_info.vc_cfg_dir);
++	if (!proc_info.clients)
++		goto fail;
++
++	if (vchiq_proc_create_log_entries(proc_info.vc_cfg_dir) != 0)
++		goto fail;
++
++	return 0;
++
++fail:
++	vchiq_proc_deinit();
++	vchiq_log_error(vchiq_arm_log_level,
++		"%s: failed to create proc directory",
++		__func__);
++
++	return -ENOMEM;
++}
++
++/* remove all the proc entries */
++void vchiq_proc_deinit(void)
++{
++	/* log category entries */
++	if (proc_info.log_categories) {
++		size_t i;
++		for (i = 0; i < n_log_entries; i++)
++			if (vchiq_proc_log_entries[i].dir)
++				remove_proc_entry(
++					vchiq_proc_log_entries[i].name,
++					proc_info.log_categories);
++
++		remove_proc_entry(proc_info.log_categories->name,
++				  proc_info.vc_cfg_dir);
++	}
++	if (proc_info.clients)
++		remove_proc_entry(proc_info.clients->name,
++				  proc_info.vc_cfg_dir);
++	if (proc_info.vc_cfg_dir)
++		remove_proc_entry(proc_info.vc_cfg_dir->name, NULL);
++}
++
++struct proc_dir_entry *vchiq_clients_top(void)
++{
++	return proc_info.clients;
++}
++
++#endif
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_shim.c linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_shim.c
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_shim.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_shim.c	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,828 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++#include <linux/module.h>
++#include <linux/types.h>
++
++#include "interface/vchi/vchi.h"
++#include "vchiq.h"
++#include "vchiq_core.h"
++
++#include "vchiq_util.h"
++
++#include <stddef.h>
++
++#define vchiq_status_to_vchi(status) ((int32_t)status)
++
++typedef struct {
++	VCHIQ_SERVICE_HANDLE_T handle;
++
++	VCHIU_QUEUE_T queue;
++
++	VCHI_CALLBACK_T callback;
++	void *callback_param;
++} SHIM_SERVICE_T;
++
++/* ----------------------------------------------------------------------
++ * return pointer to the mphi message driver function table
++ * -------------------------------------------------------------------- */
++const VCHI_MESSAGE_DRIVER_T *
++vchi_mphi_message_driver_func_table(void)
++{
++	return NULL;
++}
++
++/* ----------------------------------------------------------------------
++ * return a pointer to the 'single' connection driver fops
++ * -------------------------------------------------------------------- */
++const VCHI_CONNECTION_API_T *
++single_get_func_table(void)
++{
++	return NULL;
++}
++
++VCHI_CONNECTION_T *vchi_create_connection(
++	const VCHI_CONNECTION_API_T *function_table,
++	const VCHI_MESSAGE_DRIVER_T *low_level)
++{
++	(void)function_table;
++	(void)low_level;
++	return NULL;
++}
++
++/***********************************************************
++ * Name: vchi_msg_peek
++ *
++ * Arguments:  const VCHI_SERVICE_HANDLE_T handle,
++ *             void **data,
++ *             uint32_t *msg_size,
++
++
++ *             VCHI_FLAGS_T flags
++ *
++ * Description: Routine to return a pointer to the current message (to allow in
++ *              place processing). The message can be removed using
++ *              vchi_msg_remove when you're finished
++ *
++ * Returns: int32_t - success == 0
++ *
++ ***********************************************************/
++int32_t vchi_msg_peek(VCHI_SERVICE_HANDLE_T handle,
++	void **data,
++	uint32_t *msg_size,
++	VCHI_FLAGS_T flags)
++{
++	SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle;
++	VCHIQ_HEADER_T *header;
++
++	WARN_ON((flags != VCHI_FLAGS_NONE) &&
++		(flags != VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE));
++
++	if (flags == VCHI_FLAGS_NONE)
++		if (vchiu_queue_is_empty(&service->queue))
++			return -1;
++
++	header = vchiu_queue_peek(&service->queue);
++
++	*data = header->data;
++	*msg_size = header->size;
++
++	return 0;
++}
++EXPORT_SYMBOL(vchi_msg_peek);
++
++/***********************************************************
++ * Name: vchi_msg_remove
++ *
++ * Arguments:  const VCHI_SERVICE_HANDLE_T handle,
++ *
++ * Description: Routine to remove a message (after it has been read with
++ *              vchi_msg_peek)
++ *
++ * Returns: int32_t - success == 0
++ *
++ ***********************************************************/
++int32_t vchi_msg_remove(VCHI_SERVICE_HANDLE_T handle)
++{
++	SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle;
++	VCHIQ_HEADER_T *header;
++
++	header = vchiu_queue_pop(&service->queue);
++
++	vchiq_release_message(service->handle, header);
++
++	return 0;
++}
++EXPORT_SYMBOL(vchi_msg_remove);
++
++/***********************************************************
++ * Name: vchi_msg_queue
++ *
++ * Arguments:  VCHI_SERVICE_HANDLE_T handle,
++ *             const void *data,
++ *             uint32_t data_size,
++ *             VCHI_FLAGS_T flags,
++ *             void *msg_handle,
++ *
++ * Description: Thin wrapper to queue a message onto a connection
++ *
++ * Returns: int32_t - success == 0
++ *
++ ***********************************************************/
++int32_t vchi_msg_queue(VCHI_SERVICE_HANDLE_T handle,
++	const void *data,
++	uint32_t data_size,
++	VCHI_FLAGS_T flags,
++	void *msg_handle)
++{
++	SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle;
++	VCHIQ_ELEMENT_T element = {data, data_size};
++	VCHIQ_STATUS_T status;
++
++	(void)msg_handle;
++
++	WARN_ON(flags != VCHI_FLAGS_BLOCK_UNTIL_QUEUED);
++
++	status = vchiq_queue_message(service->handle, &element, 1);
++
++	/* vchiq_queue_message() may return VCHIQ_RETRY, so we need to
++	** implement a retry mechanism since this function is supposed
++	** to block until queued
++	*/
++	while (status == VCHIQ_RETRY) {
++		msleep(1);
++		status = vchiq_queue_message(service->handle, &element, 1);
++	}
++
++	return vchiq_status_to_vchi(status);
++}
++EXPORT_SYMBOL(vchi_msg_queue);
++
++/***********************************************************
++ * Name: vchi_bulk_queue_receive
++ *
++ * Arguments:  VCHI_BULK_HANDLE_T handle,
++ *             void *data_dst,
++ *             const uint32_t data_size,
++ *             VCHI_FLAGS_T flags
++ *             void *bulk_handle
++ *
++ * Description: Routine to setup a rcv buffer
++ *
++ * Returns: int32_t - success == 0
++ *
++ ***********************************************************/
++int32_t vchi_bulk_queue_receive(VCHI_SERVICE_HANDLE_T handle,
++	void *data_dst,
++	uint32_t data_size,
++	VCHI_FLAGS_T flags,
++	void *bulk_handle)
++{
++	SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle;
++	VCHIQ_BULK_MODE_T mode;
++	VCHIQ_STATUS_T status;
++
++	switch ((int)flags) {
++	case VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE
++		| VCHI_FLAGS_BLOCK_UNTIL_QUEUED:
++		WARN_ON(!service->callback);
++		mode = VCHIQ_BULK_MODE_CALLBACK;
++		break;
++	case VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE:
++		mode = VCHIQ_BULK_MODE_BLOCKING;
++		break;
++	case VCHI_FLAGS_BLOCK_UNTIL_QUEUED:
++	case VCHI_FLAGS_NONE:
++		mode = VCHIQ_BULK_MODE_NOCALLBACK;
++		break;
++	default:
++		WARN(1, "unsupported message\n");
++		return vchiq_status_to_vchi(VCHIQ_ERROR);
++	}
++
++	status = vchiq_bulk_receive(service->handle, data_dst, data_size,
++		bulk_handle, mode);
++
++	/* vchiq_bulk_receive() may return VCHIQ_RETRY, so we need to
++	** implement a retry mechanism since this function is supposed
++	** to block until queued
++	*/
++	while (status == VCHIQ_RETRY) {
++		msleep(1);
++		status = vchiq_bulk_receive(service->handle, data_dst,
++			data_size, bulk_handle, mode);
++	}
++
++	return vchiq_status_to_vchi(status);
++}
++EXPORT_SYMBOL(vchi_bulk_queue_receive);
++
++/***********************************************************
++ * Name: vchi_bulk_queue_transmit
++ *
++ * Arguments:  VCHI_BULK_HANDLE_T handle,
++ *             const void *data_src,
++ *             uint32_t data_size,
++ *             VCHI_FLAGS_T flags,
++ *             void *bulk_handle
++ *
++ * Description: Routine to transmit some data
++ *
++ * Returns: int32_t - success == 0
++ *
++ ***********************************************************/
++int32_t vchi_bulk_queue_transmit(VCHI_SERVICE_HANDLE_T handle,
++	const void *data_src,
++	uint32_t data_size,
++	VCHI_FLAGS_T flags,
++	void *bulk_handle)
++{
++	SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle;
++	VCHIQ_BULK_MODE_T mode;
++	VCHIQ_STATUS_T status;
++
++	switch ((int)flags) {
++	case VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE
++		| VCHI_FLAGS_BLOCK_UNTIL_QUEUED:
++		WARN_ON(!service->callback);
++		mode = VCHIQ_BULK_MODE_CALLBACK;
++		break;
++	case VCHI_FLAGS_BLOCK_UNTIL_DATA_READ:
++	case VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE:
++		mode = VCHIQ_BULK_MODE_BLOCKING;
++		break;
++	case VCHI_FLAGS_BLOCK_UNTIL_QUEUED:
++	case VCHI_FLAGS_NONE:
++		mode = VCHIQ_BULK_MODE_NOCALLBACK;
++		break;
++	default:
++		WARN(1, "unsupported message\n");
++		return vchiq_status_to_vchi(VCHIQ_ERROR);
++	}
++
++	status = vchiq_bulk_transmit(service->handle, data_src, data_size,
++		bulk_handle, mode);
++
++	/* vchiq_bulk_transmit() may return VCHIQ_RETRY, so we need to
++	** implement a retry mechanism since this function is supposed
++	** to block until queued
++	*/
++	while (status == VCHIQ_RETRY) {
++		msleep(1);
++		status = vchiq_bulk_transmit(service->handle, data_src,
++			data_size, bulk_handle, mode);
++	}
++
++	return vchiq_status_to_vchi(status);
++}
++EXPORT_SYMBOL(vchi_bulk_queue_transmit);
++
++/***********************************************************
++ * Name: vchi_msg_dequeue
++ *
++ * Arguments:  VCHI_SERVICE_HANDLE_T handle,
++ *             void *data,
++ *             uint32_t max_data_size_to_read,
++ *             uint32_t *actual_msg_size
++ *             VCHI_FLAGS_T flags
++ *
++ * Description: Routine to dequeue a message into the supplied buffer
++ *
++ * Returns: int32_t - success == 0
++ *
++ ***********************************************************/
++int32_t vchi_msg_dequeue(VCHI_SERVICE_HANDLE_T handle,
++	void *data,
++	uint32_t max_data_size_to_read,
++	uint32_t *actual_msg_size,
++	VCHI_FLAGS_T flags)
++{
++	SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle;
++	VCHIQ_HEADER_T *header;
++
++	WARN_ON((flags != VCHI_FLAGS_NONE) &&
++		(flags != VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE));
++
++	if (flags == VCHI_FLAGS_NONE)
++		if (vchiu_queue_is_empty(&service->queue))
++			return -1;
++
++	header = vchiu_queue_pop(&service->queue);
++
++	memcpy(data, header->data, header->size < max_data_size_to_read ?
++		header->size : max_data_size_to_read);
++
++	*actual_msg_size = header->size;
++
++	vchiq_release_message(service->handle, header);
++
++	return 0;
++}
++EXPORT_SYMBOL(vchi_msg_dequeue);
++
++/***********************************************************
++ * Name: vchi_msg_queuev
++ *
++ * Arguments:  VCHI_SERVICE_HANDLE_T handle,
++ *             VCHI_MSG_VECTOR_T *vector,
++ *             uint32_t count,
++ *             VCHI_FLAGS_T flags,
++ *             void *msg_handle
++ *
++ * Description: Thin wrapper to queue a message onto a connection
++ *
++ * Returns: int32_t - success == 0
++ *
++ ***********************************************************/
++
++vchiq_static_assert(sizeof(VCHI_MSG_VECTOR_T) == sizeof(VCHIQ_ELEMENT_T));
++vchiq_static_assert(offsetof(VCHI_MSG_VECTOR_T, vec_base) ==
++	offsetof(VCHIQ_ELEMENT_T, data));
++vchiq_static_assert(offsetof(VCHI_MSG_VECTOR_T, vec_len) ==
++	offsetof(VCHIQ_ELEMENT_T, size));
++
++int32_t vchi_msg_queuev(VCHI_SERVICE_HANDLE_T handle,
++	VCHI_MSG_VECTOR_T *vector,
++	uint32_t count,
++	VCHI_FLAGS_T flags,
++	void *msg_handle)
++{
++	SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle;
++
++	(void)msg_handle;
++
++	WARN_ON(flags != VCHI_FLAGS_BLOCK_UNTIL_QUEUED);
++
++	return vchiq_status_to_vchi(vchiq_queue_message(service->handle,
++		(const VCHIQ_ELEMENT_T *)vector, count));
++}
++EXPORT_SYMBOL(vchi_msg_queuev);
++
++/***********************************************************
++ * Name: vchi_held_msg_release
++ *
++ * Arguments:  VCHI_HELD_MSG_T *message
++ *
++ * Description: Routine to release a held message (after it has been read with
++ *              vchi_msg_hold)
++ *
++ * Returns: int32_t - success == 0
++ *
++ ***********************************************************/
++int32_t vchi_held_msg_release(VCHI_HELD_MSG_T *message)
++{
++	vchiq_release_message((VCHIQ_SERVICE_HANDLE_T)message->service,
++		(VCHIQ_HEADER_T *)message->message);
++
++	return 0;
++}
++EXPORT_SYMBOL(vchi_held_msg_release);
++
++/***********************************************************
++ * Name: vchi_msg_hold
++ *
++ * Arguments:  VCHI_SERVICE_HANDLE_T handle,
++ *             void **data,
++ *             uint32_t *msg_size,
++ *             VCHI_FLAGS_T flags,
++ *             VCHI_HELD_MSG_T *message_handle
++ *
++ * Description: Routine to return a pointer to the current message (to allow
++ *              in place processing). The message is dequeued - don't forget
++ *              to release the message using vchi_held_msg_release when you're
++ *              finished.
++ *
++ * Returns: int32_t - success == 0
++ *
++ ***********************************************************/
++int32_t vchi_msg_hold(VCHI_SERVICE_HANDLE_T handle,
++	void **data,
++	uint32_t *msg_size,
++	VCHI_FLAGS_T flags,
++	VCHI_HELD_MSG_T *message_handle)
++{
++	SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle;
++	VCHIQ_HEADER_T *header;
++
++	WARN_ON((flags != VCHI_FLAGS_NONE) &&
++		(flags != VCHI_FLAGS_BLOCK_UNTIL_OP_COMPLETE));
++
++	if (flags == VCHI_FLAGS_NONE)
++		if (vchiu_queue_is_empty(&service->queue))
++			return -1;
++
++	header = vchiu_queue_pop(&service->queue);
++
++	*data = header->data;
++	*msg_size = header->size;
++
++	message_handle->service =
++		(struct opaque_vchi_service_t *)service->handle;
++	message_handle->message = header;
++
++	return 0;
++}
++EXPORT_SYMBOL(vchi_msg_hold);
++
++/***********************************************************
++ * Name: vchi_initialise
++ *
++ * Arguments: VCHI_INSTANCE_T *instance_handle
++ *            VCHI_CONNECTION_T **connections
++ *            const uint32_t num_connections
++ *
++ * Description: Initialises the hardware but does not transmit anything
++ *              When run as a Host App this will be called twice hence the need
++ *              to malloc the state information
++ *
++ * Returns: 0 if successful, failure otherwise
++ *
++ ***********************************************************/
++
++int32_t vchi_initialise(VCHI_INSTANCE_T *instance_handle)
++{
++	VCHIQ_INSTANCE_T instance;
++	VCHIQ_STATUS_T status;
++
++	status = vchiq_initialise(&instance);
++
++	*instance_handle = (VCHI_INSTANCE_T)instance;
++
++	return vchiq_status_to_vchi(status);
++}
++EXPORT_SYMBOL(vchi_initialise);
++
++/***********************************************************
++ * Name: vchi_connect
++ *
++ * Arguments: VCHI_CONNECTION_T **connections
++ *            const uint32_t num_connections
++ *            VCHI_INSTANCE_T instance_handle)
++ *
++ * Description: Starts the command service on each connection,
++ *              causing INIT messages to be pinged back and forth
++ *
++ * Returns: 0 if successful, failure otherwise
++ *
++ ***********************************************************/
++int32_t vchi_connect(VCHI_CONNECTION_T **connections,
++	const uint32_t num_connections,
++	VCHI_INSTANCE_T instance_handle)
++{
++	VCHIQ_INSTANCE_T instance = (VCHIQ_INSTANCE_T)instance_handle;
++
++	(void)connections;
++	(void)num_connections;
++
++	return vchiq_connect(instance);
++}
++EXPORT_SYMBOL(vchi_connect);
++
++
++/***********************************************************
++ * Name: vchi_disconnect
++ *
++ * Arguments: VCHI_INSTANCE_T instance_handle
++ *
++ * Description: Stops the command service on each connection,
++ *              causing DE-INIT messages to be pinged back and forth
++ *
++ * Returns: 0 if successful, failure otherwise
++ *
++ ***********************************************************/
++int32_t vchi_disconnect(VCHI_INSTANCE_T instance_handle)
++{
++	VCHIQ_INSTANCE_T instance = (VCHIQ_INSTANCE_T)instance_handle;
++	return vchiq_status_to_vchi(vchiq_shutdown(instance));
++}
++EXPORT_SYMBOL(vchi_disconnect);
++
++
++/***********************************************************
++ * Name: vchi_service_open
++ * Name: vchi_service_create
++ *
++ * Arguments: VCHI_INSTANCE_T *instance_handle
++ *            SERVICE_CREATION_T *setup,
++ *            VCHI_SERVICE_HANDLE_T *handle
++ *
++ * Description: Routine to open a service
++ *
++ * Returns: int32_t - success == 0
++ *
++ ***********************************************************/
++
++static VCHIQ_STATUS_T shim_callback(VCHIQ_REASON_T reason,
++	VCHIQ_HEADER_T *header, VCHIQ_SERVICE_HANDLE_T handle, void *bulk_user)
++{
++	SHIM_SERVICE_T *service =
++		(SHIM_SERVICE_T *)VCHIQ_GET_SERVICE_USERDATA(handle);
++
++        if (!service->callback)
++		goto release;
++
++	switch (reason) {
++	case VCHIQ_MESSAGE_AVAILABLE:
++		vchiu_queue_push(&service->queue, header);
++
++		service->callback(service->callback_param,
++				  VCHI_CALLBACK_MSG_AVAILABLE, NULL);
++
++		goto done;
++		break;
++
++	case VCHIQ_BULK_TRANSMIT_DONE:
++		service->callback(service->callback_param,
++				  VCHI_CALLBACK_BULK_SENT, bulk_user);
++		break;
++
++	case VCHIQ_BULK_RECEIVE_DONE:
++		service->callback(service->callback_param,
++				  VCHI_CALLBACK_BULK_RECEIVED, bulk_user);
++		break;
++
++	case VCHIQ_SERVICE_CLOSED:
++		service->callback(service->callback_param,
++				  VCHI_CALLBACK_SERVICE_CLOSED, NULL);
++		break;
++
++	case VCHIQ_SERVICE_OPENED:
++		/* No equivalent VCHI reason */
++		break;
++
++	case VCHIQ_BULK_TRANSMIT_ABORTED:
++		service->callback(service->callback_param,
++				  VCHI_CALLBACK_BULK_TRANSMIT_ABORTED,
++				  bulk_user);
++		break;
++
++	case VCHIQ_BULK_RECEIVE_ABORTED:
++		service->callback(service->callback_param,
++				  VCHI_CALLBACK_BULK_RECEIVE_ABORTED,
++				  bulk_user);
++		break;
++
++	default:
++		WARN(1, "not supported\n");
++		break;
++	}
++
++release:
++        vchiq_release_message(service->handle, header);
++done:
++	return VCHIQ_SUCCESS;
++}
++
++static SHIM_SERVICE_T *service_alloc(VCHIQ_INSTANCE_T instance,
++	SERVICE_CREATION_T *setup)
++{
++	SHIM_SERVICE_T *service = kzalloc(sizeof(SHIM_SERVICE_T), GFP_KERNEL);
++
++	(void)instance;
++
++	if (service) {
++		if (vchiu_queue_init(&service->queue, 64)) {
++			service->callback = setup->callback;
++			service->callback_param = setup->callback_param;
++		} else {
++			kfree(service);
++			service = NULL;
++		}
++	}
++
++	return service;
++}
++
++static void service_free(SHIM_SERVICE_T *service)
++{
++	if (service) {
++		vchiu_queue_delete(&service->queue);
++		kfree(service);
++	}
++}
++
++int32_t vchi_service_open(VCHI_INSTANCE_T instance_handle,
++	SERVICE_CREATION_T *setup,
++	VCHI_SERVICE_HANDLE_T *handle)
++{
++	VCHIQ_INSTANCE_T instance = (VCHIQ_INSTANCE_T)instance_handle;
++	SHIM_SERVICE_T *service = service_alloc(instance, setup);
++	if (service) {
++		VCHIQ_SERVICE_PARAMS_T params;
++		VCHIQ_STATUS_T status;
++
++		memset(&params, 0, sizeof(params));
++		params.fourcc = setup->service_id;
++		params.callback = shim_callback;
++		params.userdata = service;
++		params.version = setup->version.version;
++		params.version_min = setup->version.version_min;
++
++		status = vchiq_open_service(instance, &params,
++			&service->handle);
++		if (status != VCHIQ_SUCCESS) {
++			service_free(service);
++			service = NULL;
++		}
++	}
++
++	*handle = (VCHI_SERVICE_HANDLE_T)service;
++
++	return (service != NULL) ? 0 : -1;
++}
++EXPORT_SYMBOL(vchi_service_open);
++
++int32_t vchi_service_create(VCHI_INSTANCE_T instance_handle,
++	SERVICE_CREATION_T *setup,
++	VCHI_SERVICE_HANDLE_T *handle)
++{
++	VCHIQ_INSTANCE_T instance = (VCHIQ_INSTANCE_T)instance_handle;
++	SHIM_SERVICE_T *service = service_alloc(instance, setup);
++	if (service) {
++		VCHIQ_SERVICE_PARAMS_T params;
++		VCHIQ_STATUS_T status;
++
++		memset(&params, 0, sizeof(params));
++		params.fourcc = setup->service_id;
++		params.callback = shim_callback;
++		params.userdata = service;
++		params.version = setup->version.version;
++		params.version_min = setup->version.version_min;
++		status = vchiq_add_service(instance, &params, &service->handle);
++
++		if (status != VCHIQ_SUCCESS) {
++			service_free(service);
++			service = NULL;
++		}
++	}
++
++	*handle = (VCHI_SERVICE_HANDLE_T)service;
++
++	return (service != NULL) ? 0 : -1;
++}
++EXPORT_SYMBOL(vchi_service_create);
++
++int32_t vchi_service_close(const VCHI_SERVICE_HANDLE_T handle)
++{
++	int32_t ret = -1;
++	SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle;
++	if (service) {
++		VCHIQ_STATUS_T status = vchiq_close_service(service->handle);
++		if (status == VCHIQ_SUCCESS) {
++			service_free(service);
++			service = NULL;
++		}
++
++		ret = vchiq_status_to_vchi(status);
++	}
++	return ret;
++}
++EXPORT_SYMBOL(vchi_service_close);
++
++int32_t vchi_service_destroy(const VCHI_SERVICE_HANDLE_T handle)
++{
++	int32_t ret = -1;
++	SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle;
++	if (service) {
++		VCHIQ_STATUS_T status = vchiq_remove_service(service->handle);
++		if (status == VCHIQ_SUCCESS) {
++			service_free(service);
++			service = NULL;
++		}
++
++		ret = vchiq_status_to_vchi(status);
++	}
++	return ret;
++}
++EXPORT_SYMBOL(vchi_service_destroy);
++
++int32_t vchi_get_peer_version( const VCHI_SERVICE_HANDLE_T handle, short *peer_version )
++{
++   int32_t ret = -1;
++   SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle;
++   if(service)
++   {
++      VCHIQ_STATUS_T status = vchiq_get_peer_version(service->handle, peer_version);
++      ret = vchiq_status_to_vchi( status );
++   }
++   return ret;
++}
++EXPORT_SYMBOL(vchi_get_peer_version);
++
++/* ----------------------------------------------------------------------
++ * read a uint32_t from buffer.
++ * network format is defined to be little endian
++ * -------------------------------------------------------------------- */
++uint32_t
++vchi_readbuf_uint32(const void *_ptr)
++{
++	const unsigned char *ptr = _ptr;
++	return ptr[0] | (ptr[1] << 8) | (ptr[2] << 16) | (ptr[3] << 24);
++}
++
++/* ----------------------------------------------------------------------
++ * write a uint32_t to buffer.
++ * network format is defined to be little endian
++ * -------------------------------------------------------------------- */
++void
++vchi_writebuf_uint32(void *_ptr, uint32_t value)
++{
++	unsigned char *ptr = _ptr;
++	ptr[0] = (unsigned char)((value >> 0)  & 0xFF);
++	ptr[1] = (unsigned char)((value >> 8)  & 0xFF);
++	ptr[2] = (unsigned char)((value >> 16) & 0xFF);
++	ptr[3] = (unsigned char)((value >> 24) & 0xFF);
++}
++
++/* ----------------------------------------------------------------------
++ * read a uint16_t from buffer.
++ * network format is defined to be little endian
++ * -------------------------------------------------------------------- */
++uint16_t
++vchi_readbuf_uint16(const void *_ptr)
++{
++	const unsigned char *ptr = _ptr;
++	return ptr[0] | (ptr[1] << 8);
++}
++
++/* ----------------------------------------------------------------------
++ * write a uint16_t into the buffer.
++ * network format is defined to be little endian
++ * -------------------------------------------------------------------- */
++void
++vchi_writebuf_uint16(void *_ptr, uint16_t value)
++{
++	unsigned char *ptr = _ptr;
++	ptr[0] = (value >> 0)  & 0xFF;
++	ptr[1] = (value >> 8)  & 0xFF;
++}
++
++/***********************************************************
++ * Name: vchi_service_use
++ *
++ * Arguments: const VCHI_SERVICE_HANDLE_T handle
++ *
++ * Description: Routine to increment refcount on a service
++ *
++ * Returns: void
++ *
++ ***********************************************************/
++int32_t vchi_service_use(const VCHI_SERVICE_HANDLE_T handle)
++{
++	int32_t ret = -1;
++	SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle;
++	if (service)
++		ret = vchiq_status_to_vchi(vchiq_use_service(service->handle));
++	return ret;
++}
++EXPORT_SYMBOL(vchi_service_use);
++
++/***********************************************************
++ * Name: vchi_service_release
++ *
++ * Arguments: const VCHI_SERVICE_HANDLE_T handle
++ *
++ * Description: Routine to decrement refcount on a service
++ *
++ * Returns: void
++ *
++ ***********************************************************/
++int32_t vchi_service_release(const VCHI_SERVICE_HANDLE_T handle)
++{
++	int32_t ret = -1;
++	SHIM_SERVICE_T *service = (SHIM_SERVICE_T *)handle;
++	if (service)
++		ret = vchiq_status_to_vchi(
++			vchiq_release_service(service->handle));
++	return ret;
++}
++EXPORT_SYMBOL(vchi_service_release);
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.c linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.c
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.c	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,151 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#include "vchiq_util.h"
++
++static inline int is_pow2(int i)
++{
++	return i && !(i & (i - 1));
++}
++
++int vchiu_queue_init(VCHIU_QUEUE_T *queue, int size)
++{
++	WARN_ON(!is_pow2(size));
++
++	queue->size = size;
++	queue->read = 0;
++	queue->write = 0;
++
++	sema_init(&queue->pop, 0);
++	sema_init(&queue->push, 0);
++
++	queue->storage = kzalloc(size * sizeof(VCHIQ_HEADER_T *), GFP_KERNEL);
++	if (queue->storage == NULL) {
++		vchiu_queue_delete(queue);
++		return 0;
++	}
++	return 1;
++}
++
++void vchiu_queue_delete(VCHIU_QUEUE_T *queue)
++{
++	if (queue->storage != NULL)
++		kfree(queue->storage);
++}
++
++int vchiu_queue_is_empty(VCHIU_QUEUE_T *queue)
++{
++	return queue->read == queue->write;
++}
++
++int vchiu_queue_is_full(VCHIU_QUEUE_T *queue)
++{
++	return queue->write == queue->read + queue->size;
++}
++
++void vchiu_queue_push(VCHIU_QUEUE_T *queue, VCHIQ_HEADER_T *header)
++{
++	while (queue->write == queue->read + queue->size) {
++		if (down_interruptible(&queue->pop) != 0) {
++			flush_signals(current);
++		}
++	}
++
++	/*
++	 * Write to queue->storage must be visible after read from
++	 * queue->read
++	 */
++	smp_mb();
++
++	queue->storage[queue->write & (queue->size - 1)] = header;
++
++	/*
++	 * Write to queue->storage must be visible before write to
++	 * queue->write
++	 */
++	smp_wmb();
++
++	queue->write++;
++
++	up(&queue->push);
++}
++
++VCHIQ_HEADER_T *vchiu_queue_peek(VCHIU_QUEUE_T *queue)
++{
++	while (queue->write == queue->read) {
++		if (down_interruptible(&queue->push) != 0) {
++			flush_signals(current);
++		}
++	}
++
++	up(&queue->push); // We haven't removed anything from the queue.
++
++	/*
++	 * Read from queue->storage must be visible after read from
++	 * queue->write
++	 */
++	smp_rmb();
++
++	return queue->storage[queue->read & (queue->size - 1)];
++}
++
++VCHIQ_HEADER_T *vchiu_queue_pop(VCHIU_QUEUE_T *queue)
++{
++	VCHIQ_HEADER_T *header;
++
++	while (queue->write == queue->read) {
++		if (down_interruptible(&queue->push) != 0) {
++			flush_signals(current);
++		}
++	}
++
++	/*
++	 * Read from queue->storage must be visible after read from
++	 * queue->write
++	 */
++	smp_rmb();
++
++	header = queue->storage[queue->read & (queue->size - 1)];
++
++	/*
++	 * Read from queue->storage must be visible before write to
++	 * queue->read
++	 */
++	smp_mb();
++
++	queue->read++;
++
++	up(&queue->pop);
++
++	return header;
++}
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.h linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.h
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.h	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,81 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef VCHIQ_UTIL_H
++#define VCHIQ_UTIL_H
++
++#include <linux/types.h>
++#include <linux/semaphore.h>
++#include <linux/mutex.h>
++#include <linux/bitops.h>
++#include <linux/kthread.h>
++#include <linux/wait.h>
++#include <linux/vmalloc.h>
++#include <linux/jiffies.h>
++#include <linux/delay.h>
++#include <linux/string.h>
++#include <linux/types.h>
++#include <linux/interrupt.h>
++#include <linux/random.h>
++#include <linux/sched.h>
++#include <linux/ctype.h>
++#include <linux/uaccess.h>
++#include <linux/time.h>  /* for time_t */
++#include <linux/slab.h>
++#include <linux/vmalloc.h>
++
++#include "vchiq_if.h"
++
++typedef struct {
++	int size;
++	int read;
++	int write;
++
++	struct semaphore pop;
++	struct semaphore push;
++
++	VCHIQ_HEADER_T **storage;
++} VCHIU_QUEUE_T;
++
++extern int  vchiu_queue_init(VCHIU_QUEUE_T *queue, int size);
++extern void vchiu_queue_delete(VCHIU_QUEUE_T *queue);
++
++extern int vchiu_queue_is_empty(VCHIU_QUEUE_T *queue);
++extern int vchiu_queue_is_full(VCHIU_QUEUE_T *queue);
++
++extern void vchiu_queue_push(VCHIU_QUEUE_T *queue, VCHIQ_HEADER_T *header);
++
++extern VCHIQ_HEADER_T *vchiu_queue_peek(VCHIU_QUEUE_T *queue);
++extern VCHIQ_HEADER_T *vchiu_queue_pop(VCHIU_QUEUE_T *queue);
++
++#endif
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_version.c linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_version.c
+--- linux-3.12.6/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_version.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_version.c	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,59 @@
++/**
++ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") version 2, as published by the Free
++ * Software Foundation.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++#include "vchiq_build_info.h"
++#include <linux/broadcom/vc_debug_sym.h>
++
++VC_DEBUG_DECLARE_STRING_VAR( vchiq_build_hostname, "dc4-arm-01" );
++VC_DEBUG_DECLARE_STRING_VAR( vchiq_build_version, "9245b4c35b99b3870e1f7dc598c5692b3c66a6f0 (tainted)" );
++VC_DEBUG_DECLARE_STRING_VAR( vchiq_build_time,    __TIME__ );
++VC_DEBUG_DECLARE_STRING_VAR( vchiq_build_date,    __DATE__ );
++
++const char *vchiq_get_build_hostname( void )
++{
++   return vchiq_build_hostname;
++}
++
++const char *vchiq_get_build_version( void )
++{
++   return vchiq_build_version;
++}
++
++const char *vchiq_get_build_date( void )
++{
++   return vchiq_build_date;
++}
++
++const char *vchiq_get_build_time( void )
++{
++   return vchiq_build_time;
++}
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/Kconfig linux-raspberry-pi/drivers/misc/vc04_services/Kconfig
+--- linux-3.12.6/drivers/misc/vc04_services/Kconfig	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/Kconfig	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,9 @@
++config BCM2708_VCHIQ
++	tristate "Videocore VCHIQ"
++	depends on MACH_BCM2708
++	default y
++	help
++		Kernel to VideoCore communication interface for the
++		BCM2708 family of products.
++		Defaults to Y when the Broadcom Videocore services
++		are included in the build, N otherwise.
+diff -Nur linux-3.12.6/drivers/misc/vc04_services/Makefile linux-raspberry-pi/drivers/misc/vc04_services/Makefile
+--- linux-3.12.6/drivers/misc/vc04_services/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/misc/vc04_services/Makefile	2013-12-29 10:40:57.000000000 +0100
+@@ -0,0 +1,17 @@
++ifeq ($(CONFIG_MACH_BCM2708),y)
++
++obj-$(CONFIG_BCM2708_VCHIQ)	+= vchiq.o
++
++vchiq-objs := \
++   interface/vchiq_arm/vchiq_core.o  \
++   interface/vchiq_arm/vchiq_arm.o \
++   interface/vchiq_arm/vchiq_kern_lib.o \
++   interface/vchiq_arm/vchiq_2835_arm.o \
++   interface/vchiq_arm/vchiq_proc.o \
++   interface/vchiq_arm/vchiq_shim.o \
++   interface/vchiq_arm/vchiq_util.o \
++   interface/vchiq_arm/vchiq_connected.o \
++
++EXTRA_CFLAGS += -DVCOS_VERIFY_BKPTS=1 -Idrivers/misc/vc04_services -DUSE_VCHIQ_ARM -D__VCCOREVER__=0x04000000
++
++endif
+diff -Nur linux-3.12.6/drivers/mmc/card/block.c linux-raspberry-pi/drivers/mmc/card/block.c
+--- linux-3.12.6/drivers/mmc/card/block.c	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/mmc/card/block.c	2013-12-29 10:40:57.000000000 +0100
+@@ -1361,7 +1361,7 @@
+ 			brq->data.blocks = 1;
+ 	}
+ 
+-	if (brq->data.blocks > 1 || do_rel_wr) {
++	if (brq->data.blocks > 1 || do_rel_wr || card->host->caps2 & MMC_CAP2_FORCE_MULTIBLOCK) {
+ 		/* SPI multiblock writes terminate using a special
+ 		 * token, not a STOP_TRANSMISSION request.
+ 		 */
+diff -Nur linux-3.12.6/drivers/mmc/core/sd.c linux-raspberry-pi/drivers/mmc/core/sd.c
+--- linux-3.12.6/drivers/mmc/core/sd.c	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/mmc/core/sd.c	2013-12-29 10:40:57.000000000 +0100
+@@ -13,6 +13,8 @@
+ #include <linux/err.h>
+ #include <linux/slab.h>
+ #include <linux/stat.h>
++#include <linux/jiffies.h>
++#include <linux/nmi.h>
+ 
+ #include <linux/mmc/host.h>
+ #include <linux/mmc/card.h>
+@@ -58,6 +60,15 @@
+ 		__res & __mask;						\
+ 	})
+ 
++// timeout for tries
++static const unsigned long retry_timeout_ms= 10*1000;
++
++// try at least 10 times, even if timeout is reached
++static const int retry_min_tries= 10;
++
++// delay between tries
++static const unsigned long retry_delay_ms= 10;
++
+ /*
+  * Given the decoded CSD structure, decode the raw CID to our CID structure.
+  */
+@@ -210,12 +221,63 @@
+ }
+ 
+ /*
+- * Fetch and process SD Status register.
++ * Fetch and process SD Configuration Register.
++ */
++static int mmc_read_scr(struct mmc_card *card)
++{
++	unsigned long timeout_at;
++	int err, tries;
++
++	timeout_at= jiffies + msecs_to_jiffies( retry_timeout_ms );
++	tries= 		0;
++
++	while( tries < retry_min_tries || time_before( jiffies, timeout_at ) )
++	{
++		unsigned long delay_at;
++		tries++;
++
++		err = mmc_app_send_scr(card, card->raw_scr);
++		if( !err )
++			break; // success!!!
++
++		touch_nmi_watchdog();	  // we are still alive!
++
++		// delay
++		delay_at= jiffies + msecs_to_jiffies( retry_delay_ms );
++		while( time_before( jiffies, delay_at ) )
++		{
++			mdelay( 1 );
++			touch_nmi_watchdog();	  // we are still alive!
++		}
++	}
++
++	if( err)
++	{
++		pr_err("%s: failed to read SD Configuration register (SCR) after %d tries during %lu ms, error %d\n", mmc_hostname(card->host), tries, retry_timeout_ms, err );
++		return err;
++	}
++
++	if( tries > 1 )
++	{
++		pr_info("%s: could read SD Configuration register (SCR) at the %dth attempt\n", mmc_hostname(card->host), tries );
++	}
++
++	err = mmc_decode_scr(card);
++	if (err)
++		return err;
++
++	return err;
++}
++
++/*
++ * Fetch and process SD Status Register.
+  */
+ static int mmc_read_ssr(struct mmc_card *card)
+ {
++	unsigned long timeout_at;
+ 	unsigned int au, es, et, eo;
+ 	int err, i, max_au;
++        int tries;
+ 	u32 *ssr;
+ 
+ 	if (!(card->csd.cmdclass & CCC_APP_SPEC)) {
+@@ -228,14 +290,40 @@
+ 	if (!ssr)
+ 		return -ENOMEM;
+ 
+-	err = mmc_app_sd_status(card, ssr);
+-	if (err) {
+-		pr_warning("%s: problem reading SD Status "
+-			"register.\n", mmc_hostname(card->host));
+-		err = 0;
++	timeout_at= jiffies + msecs_to_jiffies( retry_timeout_ms );
++	tries= 		0;
++
++	while( tries < retry_min_tries || time_before( jiffies, timeout_at ) )
++	{
++		unsigned long delay_at;
++		tries++;
++
++		err= mmc_app_sd_status(card, ssr);
++		if( !err )
++			break; // sucess!!!
++
++		touch_nmi_watchdog();	  // we are still alive!
++
++		// delay
++		delay_at= jiffies + msecs_to_jiffies( retry_delay_ms );
++		while( time_before( jiffies, delay_at ) )
++		{
++			mdelay( 1 );
++			touch_nmi_watchdog();	  // we are still alive!
++		}
++	}
++
++	if( err)
++	{
++		pr_err("%s: failed to read SD Status register (SSR) after %d tries during %lu ms, error %d\n", mmc_hostname(card->host), tries, retry_timeout_ms, err );
+ 		goto out;
+ 	}
+ 
++	if( tries > 1 )
++	{
++		pr_info("%s: read SD Status register (SSR) after %d attempts\n", mmc_hostname(card->host), tries );
++	}
++
+ 	for (i = 0; i < 16; i++)
+ 		ssr[i] = be32_to_cpu(ssr[i]);
+ 
+@@ -816,14 +904,10 @@
+ 
+ 	if (!reinit) {
+ 		/*
+-		 * Fetch SCR from card.
++		 * Fetch and decode SD Configuration register.
+ 		 */
+-		err = mmc_app_send_scr(card, card->raw_scr);
+-		if (err)
+-			return err;
+-
+-		err = mmc_decode_scr(card);
+-		if (err)
++		err = mmc_read_scr(card);
++		if( err )
+ 			return err;
+ 
+ 		/*
+diff -Nur linux-3.12.6/drivers/mmc/host/Kconfig linux-raspberry-pi/drivers/mmc/host/Kconfig
+--- linux-3.12.6/drivers/mmc/host/Kconfig	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/mmc/host/Kconfig	2013-12-29 10:40:58.000000000 +0100
+@@ -260,6 +260,27 @@
+ 
+ 	  If you have a controller with this interface, say Y or M here.
+ 
++config MMC_SDHCI_BCM2708
++	tristate "SDHCI support on BCM2708"
++	depends on MMC_SDHCI && MACH_BCM2708
++	select MMC_SDHCI_IO_ACCESSORS
++	help
++	  This selects the Secure Digital Host Controller Interface (SDHCI)
++	  often referrered to as the eMMC block.
++
++	  If you have a controller with this interface, say Y or M here.
++
++	  If unsure, say N.
++
++config MMC_SDHCI_BCM2708_DMA
++	bool "DMA support on BCM2708 Arasan controller"
++	depends on MMC_SDHCI_BCM2708
++	help
++	Enable DMA support on the Arasan SDHCI controller in Broadcom 2708
++	  based chips.
++
++	  If unsure, say N.
++
+ config MMC_SDHCI_BCM2835
+ 	tristate "SDHCI platform support for the BCM2835 SD/MMC Controller"
+ 	depends on ARCH_BCM2835
+diff -Nur linux-3.12.6/drivers/mmc/host/Makefile linux-raspberry-pi/drivers/mmc/host/Makefile
+--- linux-3.12.6/drivers/mmc/host/Makefile	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/mmc/host/Makefile	2013-12-29 10:40:58.000000000 +0100
+@@ -15,6 +15,7 @@
+ obj-$(CONFIG_MMC_SDHCI_S3C)	+= sdhci-s3c.o
+ obj-$(CONFIG_MMC_SDHCI_SIRF)   	+= sdhci-sirf.o
+ obj-$(CONFIG_MMC_SDHCI_SPEAR)	+= sdhci-spear.o
++obj-$(CONFIG_MMC_SDHCI_BCM2708)	+= sdhci-bcm2708.o
+ obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
+ obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
+ obj-$(CONFIG_MMC_OMAP)		+= omap.o
+diff -Nur linux-3.12.6/drivers/mmc/host/sdhci-bcm2708.c linux-raspberry-pi/drivers/mmc/host/sdhci-bcm2708.c
+--- linux-3.12.6/drivers/mmc/host/sdhci-bcm2708.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/mmc/host/sdhci-bcm2708.c	2013-12-29 10:40:59.000000000 +0100
+@@ -0,0 +1,1410 @@
++/*
++ * sdhci-bcm2708.c Support for SDHCI device on BCM2708
++ * Copyright (c) 2010 Broadcom
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++/* Supports:
++ * SDHCI platform device - Arasan SD controller in BCM2708
++ *
++ * Inspired by sdhci-pci.c, by Pierre Ossman
++ */
++
++#include <linux/delay.h>
++#include <linux/highmem.h>
++#include <linux/platform_device.h>
++#include <linux/module.h>
++#include <linux/mmc/mmc.h>
++#include <linux/mmc/host.h>
++#include <linux/mmc/sd.h>
++
++#include <linux/io.h>
++#include <linux/dma-mapping.h>
++#include <mach/dma.h>
++
++#include "sdhci.h"
++
++/*****************************************************************************\
++ *									     *
++ * Configuration							     *
++ *									     *
++\*****************************************************************************/
++
++#define DRIVER_NAME "bcm2708_sdhci"
++
++/* for the time being insist on DMA mode - PIO seems not to work */
++#ifndef CONFIG_MMC_SDHCI_BCM2708_DMA
++#warning Non-DMA (PIO) version of this driver currently unavailable
++#endif
++#undef CONFIG_MMC_SDHCI_BCM2708_DMA
++#define CONFIG_MMC_SDHCI_BCM2708_DMA y
++
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++/* #define CHECK_DMA_USE */
++#endif
++//#define LOG_REGISTERS
++
++#define USE_SCHED_TIME
++#define USE_SPACED_WRITES_2CLK 1  /* space consecutive register writes */
++#define USE_SOFTWARE_TIMEOUTS 1   /* not hardware timeouts */
++#define SOFTWARE_ERASE_TIMEOUT_SEC 30
++
++#define SDHCI_BCM_DMA_CHAN 4   /* this default is normally overriden */
++#define SDHCI_BCM_DMA_WAITS 0  /* delays slowing DMA transfers: 0-31 */
++/* We are worried that SD card DMA use may be blocking the AXI bus for others */
++
++/*! TODO: obtain these from the physical address */
++#define DMA_SDHCI_BASE	 0x7e300000  /* EMMC register block on Videocore */
++#define DMA_SDHCI_BUFFER (DMA_SDHCI_BASE + SDHCI_BUFFER)
++
++#define BCM2708_SDHCI_SLEEP_TIMEOUT 1000   /* msecs */
++
++/* Mhz clock that the EMMC core is running at. Should match the platform clockman settings */
++#define BCM2708_EMMC_CLOCK_FREQ 50000000
++
++#define REG_EXRDFIFO_EN     0x80
++#define REG_EXRDFIFO_CFG    0x84
++
++int cycle_delay=2;
++
++/*****************************************************************************\
++ *									     *
++ * Debug								     *
++ *									     *
++\*****************************************************************************/
++
++
++
++#define DBG(f, x...) \
++	pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
++//	printk(KERN_INFO DRIVER_NAME " [%s()]: " f, __func__,## x)//GRAYG
++
++
++/*****************************************************************************\
++ *									     *
++ * High Precision Time							     *
++ *									     *
++\*****************************************************************************/
++
++#ifdef USE_SCHED_TIME
++
++#include <mach/frc.h>
++
++typedef unsigned long hptime_t;
++
++#define FMT_HPT "lu"
++
++static inline hptime_t hptime(void)
++{
++	return frc_clock_ticks32();
++}
++
++#define HPTIME_CLK_NS 1000ul
++
++#else
++
++typedef unsigned long hptime_t;
++
++#define FMT_HPT "lu"
++
++static inline hptime_t hptime(void)
++{
++	return jiffies;
++}
++
++#define HPTIME_CLK_NS (1000000000ul/HZ)
++
++#endif
++
++static inline unsigned long int since_ns(hptime_t t)
++{
++	return (unsigned long)((hptime() - t) * HPTIME_CLK_NS);
++}
++
++static bool allow_highspeed = 1;
++static int emmc_clock_freq = BCM2708_EMMC_CLOCK_FREQ;
++static bool sync_after_dma = 1;
++static bool missing_status = 1;
++static bool spurious_crc_acmd51 = 0;
++bool enable_llm = 1;
++bool extra_messages = 0;
++
++#if 0
++static void hptime_test(void)
++{
++	hptime_t now;
++	hptime_t later;
++
++	now = hptime();
++	msleep(10);
++	later = hptime();
++
++	printk(KERN_INFO DRIVER_NAME": 10ms = %"FMT_HPT" clks "
++	       "(from %"FMT_HPT" to %"FMT_HPT") = %luns\n",
++	       later-now, now, later,
++	       (unsigned long)(HPTIME_CLK_NS * (later - now)));
++
++	now = hptime();
++	msleep(1000);
++	later = hptime();
++
++	printk(KERN_INFO DRIVER_NAME": 1s = %"FMT_HPT" clks "
++	       "(from %"FMT_HPT" to %"FMT_HPT") = %luns\n",
++	       later-now, now, later,
++	       (unsigned long)(HPTIME_CLK_NS * (later - now)));
++}
++#endif
++
++/*****************************************************************************\
++ *									     *
++ * SDHCI core callbacks							     *
++ *									     *
++\*****************************************************************************/
++
++
++#ifdef CHECK_DMA_USE
++/*#define CHECK_DMA_REG_USE*/
++#endif
++
++#ifdef CHECK_DMA_REG_USE
++/* we don't expect anything to be using these registers during a
++   DMA (except the IRQ status) - so check */
++static void check_dma_reg_use(struct sdhci_host *host, int reg);
++#else
++#define check_dma_reg_use(host, reg)
++#endif
++
++
++static inline u32 sdhci_bcm2708_raw_readl(struct sdhci_host *host, int reg)
++{
++	return readl(host->ioaddr + reg);
++}
++
++u32 sdhci_bcm2708_readl(struct sdhci_host *host, int reg)
++{
++	u32 l = sdhci_bcm2708_raw_readl(host, reg);
++
++#ifdef LOG_REGISTERS
++	printk(KERN_ERR "%s: readl from 0x%02x, value 0x%08x\n",
++	       mmc_hostname(host->mmc), reg, l);
++#endif
++	check_dma_reg_use(host, reg);
++
++	return l;
++}
++
++u16 sdhci_bcm2708_readw(struct sdhci_host *host, int reg)
++{
++	u32 l = sdhci_bcm2708_raw_readl(host, reg & ~3);
++	u32 w = l >> (reg << 3 & 0x18) & 0xffff;
++
++#ifdef LOG_REGISTERS
++	printk(KERN_ERR "%s: readw from 0x%02x, value 0x%04x\n",
++	       mmc_hostname(host->mmc), reg, w);
++#endif
++	check_dma_reg_use(host, reg);
++
++	return (u16)w;
++}
++
++u8 sdhci_bcm2708_readb(struct sdhci_host *host, int reg)
++{
++	u32 l = sdhci_bcm2708_raw_readl(host, reg & ~3);
++	u32 b = l >> (reg << 3 & 0x18) & 0xff;
++
++#ifdef LOG_REGISTERS
++	printk(KERN_ERR "%s: readb from 0x%02x, value 0x%02x\n",
++	       mmc_hostname(host->mmc), reg, b);
++#endif
++	check_dma_reg_use(host, reg);
++
++	return (u8)b;
++}
++
++
++static void sdhci_bcm2708_raw_writel(struct sdhci_host *host, u32 val, int reg)
++{
++	u32 ier;
++
++#if USE_SPACED_WRITES_2CLK
++	static bool timeout_disabled = false;
++	unsigned int ns_2clk = 0;
++
++	/* The Arasan has a bugette whereby it may lose the content of
++	 * successive writes to registers that are within two SD-card clock
++	 * cycles of each other (a clock domain crossing problem).
++	 * It seems, however, that the data register does not have this problem.
++	 * (Which is just as well - otherwise we'd have to nobble the DMA engine
++	 * too)
++	 */
++	if (reg != SDHCI_BUFFER && host->clock != 0) {
++		/* host->clock is the clock freq in Hz */
++		static hptime_t last_write_hpt;
++		hptime_t now = hptime();
++		ns_2clk = cycle_delay*1000000/(host->clock/1000);
++
++		if (now == last_write_hpt || now == last_write_hpt+1) {
++			 /* we can't guarantee any significant time has
++			  * passed - we'll have to wait anyway ! */
++			ndelay(ns_2clk);
++		} else
++		{
++			/* we must have waited at least this many ns: */
++			unsigned int ns_wait = HPTIME_CLK_NS *
++					       (last_write_hpt - now - 1);
++			if (ns_wait < ns_2clk)
++				ndelay(ns_2clk - ns_wait);
++		}
++		last_write_hpt = now;
++	}
++#if USE_SOFTWARE_TIMEOUTS
++	/* The Arasan is clocked for timeouts using the SD clock which is too
++	 * fast for ERASE commands and causes issues. So we disable timeouts
++	 * for ERASE */
++	if (host->cmd != NULL && host->cmd->opcode == MMC_ERASE &&
++            reg == (SDHCI_COMMAND & ~3)) {
++		mod_timer(&host->timer,
++                          jiffies + SOFTWARE_ERASE_TIMEOUT_SEC * HZ);
++		ier = readl(host->ioaddr + SDHCI_SIGNAL_ENABLE);
++		ier &= ~SDHCI_INT_DATA_TIMEOUT;
++		writel(ier, host->ioaddr + SDHCI_SIGNAL_ENABLE);
++		timeout_disabled = true;
++		ndelay(ns_2clk);
++	} else if (timeout_disabled) {
++		ier = readl(host->ioaddr + SDHCI_SIGNAL_ENABLE);
++		ier |= SDHCI_INT_DATA_TIMEOUT;
++		writel(ier, host->ioaddr + SDHCI_SIGNAL_ENABLE);
++		timeout_disabled = false;
++		ndelay(ns_2clk);
++	}
++#endif
++	writel(val, host->ioaddr + reg);
++#else
++	void __iomem * regaddr = host->ioaddr + reg;
++
++	writel(val, regaddr);
++
++	if (reg != SDHCI_BUFFER && reg != SDHCI_INT_STATUS && host->clock != 0)
++	{
++		int timeout = 100000;
++		while (val != readl(regaddr) && --timeout > 0)
++		   continue;
++
++		if (timeout <= 0)
++			printk(KERN_ERR "%s: writing 0x%X to reg 0x%X "
++			       "always gives 0x%X\n",
++			       mmc_hostname(host->mmc),
++			       val, reg, readl(regaddr));
++		BUG_ON(timeout <= 0);
++	}
++#endif
++}
++
++
++void sdhci_bcm2708_writel(struct sdhci_host *host, u32 val, int reg)
++{
++#ifdef LOG_REGISTERS
++	printk(KERN_ERR "%s: writel to 0x%02x, value 0x%08x\n",
++	       mmc_hostname(host->mmc), reg, val);
++#endif
++	check_dma_reg_use(host, reg);
++
++	sdhci_bcm2708_raw_writel(host, val, reg);
++}
++
++void sdhci_bcm2708_writew(struct sdhci_host *host, u16 val, int reg)
++{
++	static u32 shadow = 0;
++
++	u32 p = reg == SDHCI_COMMAND ? shadow :
++		       sdhci_bcm2708_raw_readl(host, reg & ~3);
++	u32 s = reg << 3 & 0x18;
++	u32 l = val << s;
++	u32 m = 0xffff << s;
++
++#ifdef LOG_REGISTERS
++	printk(KERN_ERR "%s: writew to 0x%02x, value 0x%04x\n",
++	       mmc_hostname(host->mmc), reg, val);
++#endif
++
++	if (reg == SDHCI_TRANSFER_MODE)
++		shadow = (p & ~m) | l;
++	else {
++		check_dma_reg_use(host, reg);
++		sdhci_bcm2708_raw_writel(host, (p & ~m) | l, reg & ~3);
++	}
++}
++
++void sdhci_bcm2708_writeb(struct sdhci_host *host, u8 val, int reg)
++{
++	u32 p = sdhci_bcm2708_raw_readl(host, reg & ~3);
++	u32 s = reg << 3 & 0x18;
++	u32 l = val << s;
++	u32 m = 0xff << s;
++
++#ifdef LOG_REGISTERS
++	printk(KERN_ERR "%s: writeb to 0x%02x, value 0x%02x\n",
++	       mmc_hostname(host->mmc), reg, val);
++#endif
++
++       check_dma_reg_use(host, reg);
++       sdhci_bcm2708_raw_writel(host, (p & ~m) | l, reg & ~3);
++}
++
++static unsigned int sdhci_bcm2708_get_max_clock(struct sdhci_host *host)
++{
++	return emmc_clock_freq;
++}
++
++/*****************************************************************************\
++ *									     *
++ * DMA Operation							     *
++ *									     *
++\*****************************************************************************/
++
++struct sdhci_bcm2708_priv {
++	int			dma_chan;
++	int			dma_irq;
++	void __iomem	       *dma_chan_base;
++	struct bcm2708_dma_cb  *cb_base;   /* DMA control blocks */
++	dma_addr_t		cb_handle;
++	/* tracking scatter gather progress */
++	unsigned		sg_ix;	   /* scatter gather list index */
++	unsigned		sg_done;   /* bytes in current sg_ix done */
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++	unsigned char		dma_wanted;  /* DMA transfer requested */
++	unsigned char		dma_waits;   /* wait states in DMAs */
++#ifdef CHECK_DMA_USE
++	unsigned char		dmas_pending; /* no of unfinished DMAs */
++	hptime_t		when_started;
++	hptime_t		when_reset;
++	hptime_t		when_stopped;
++#endif
++#endif
++	/* signalling the end of a transfer */
++	void		      (*complete)(struct sdhci_host *);
++};
++
++#define SDHCI_HOST_PRIV(host) \
++	(struct sdhci_bcm2708_priv *)((struct sdhci_host *)(host)+1)
++
++
++
++#ifdef CHECK_DMA_REG_USE
++static void check_dma_reg_use(struct sdhci_host *host, int reg)
++{
++	struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++	if (host_priv->dma_wanted && reg != SDHCI_INT_STATUS) {
++		printk(KERN_INFO"%s: accessing register 0x%x during DMA\n",
++		       mmc_hostname(host->mmc), reg);
++	}
++}
++#endif
++
++
++
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++
++static void sdhci_clear_set_irqgen(struct sdhci_host *host, u32 clear, u32 set)
++{
++	u32 ier;
++
++	ier = sdhci_bcm2708_raw_readl(host, SDHCI_SIGNAL_ENABLE);
++	ier &= ~clear;
++	ier |= set;
++	/* change which requests generate IRQs - makes no difference to
++	   the content of SDHCI_INT_STATUS, or the need to acknowledge IRQs */
++	sdhci_bcm2708_raw_writel(host, ier, SDHCI_SIGNAL_ENABLE);
++}
++
++static void sdhci_signal_irqs(struct sdhci_host *host, u32 irqs)
++{
++	sdhci_clear_set_irqgen(host, 0, irqs);
++}
++
++static void sdhci_unsignal_irqs(struct sdhci_host *host, u32 irqs)
++{
++	sdhci_clear_set_irqgen(host, irqs, 0);
++}
++
++
++
++static void schci_bcm2708_cb_read(struct sdhci_bcm2708_priv *host,
++				  int ix,
++				  dma_addr_t dma_addr, unsigned len,
++				  int /*bool*/ is_last)
++{
++	struct bcm2708_dma_cb *cb = &host->cb_base[ix];
++        unsigned char dmawaits = host->dma_waits;
++
++	cb->info   = BCM2708_DMA_PER_MAP(BCM2708_DMA_DREQ_EMMC) |
++		     BCM2708_DMA_WAITS(dmawaits) |
++		     BCM2708_DMA_S_DREQ	 |
++		     BCM2708_DMA_D_WIDTH |
++		     BCM2708_DMA_D_INC;
++	cb->src	   = DMA_SDHCI_BUFFER;	/* DATA register DMA address */
++	cb->dst	   = dma_addr;
++	cb->length = len;
++	cb->stride = 0;
++
++	if (is_last) {
++		cb->info |= BCM2708_DMA_INT_EN |
++		     BCM2708_DMA_WAIT_RESP;
++		cb->next = 0;
++	} else
++		cb->next = host->cb_handle +
++			   (ix+1)*sizeof(struct bcm2708_dma_cb);
++
++	cb->pad[0] = 0;
++	cb->pad[1] = 0;
++}
++
++static void schci_bcm2708_cb_write(struct sdhci_bcm2708_priv *host,
++				   int ix,
++				   dma_addr_t dma_addr, unsigned len,
++				   int /*bool*/ is_last)
++{
++	struct bcm2708_dma_cb *cb = &host->cb_base[ix];
++        unsigned char dmawaits = host->dma_waits;
++
++	/* We can make arbitrarily large writes as long as we specify DREQ to
++	   pace the delivery of bytes to the Arasan hardware */
++	cb->info   = BCM2708_DMA_PER_MAP(BCM2708_DMA_DREQ_EMMC) |
++		     BCM2708_DMA_WAITS(dmawaits) |
++		     BCM2708_DMA_D_DREQ	 |
++		     BCM2708_DMA_S_WIDTH |
++		     BCM2708_DMA_S_INC;
++	cb->src	   = dma_addr;
++	cb->dst	   = DMA_SDHCI_BUFFER;	/* DATA register DMA address */
++	cb->length = len;
++	cb->stride = 0;
++
++	if (is_last) {
++		cb->info |= BCM2708_DMA_INT_EN |
++		     BCM2708_DMA_WAIT_RESP;
++		cb->next = 0;
++	} else
++		cb->next = host->cb_handle +
++			   (ix+1)*sizeof(struct bcm2708_dma_cb);
++
++	cb->pad[0] = 0;
++	cb->pad[1] = 0;
++}
++
++
++static void schci_bcm2708_dma_go(struct sdhci_host *host)
++{
++	struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++	void __iomem *dma_chan_base = host_priv->dma_chan_base;
++
++	BUG_ON(host_priv->dma_wanted);
++#ifdef CHECK_DMA_USE
++	if (host_priv->dma_wanted)
++		printk(KERN_ERR "%s: DMA already in progress - "
++		       "now %"FMT_HPT", last started %lu "
++		       "reset %lu stopped %lu\n",
++		       mmc_hostname(host->mmc),
++		       hptime(), since_ns(host_priv->when_started),
++		       since_ns(host_priv->when_reset),
++		       since_ns(host_priv->when_stopped));
++	else if (host_priv->dmas_pending > 0)
++		printk(KERN_INFO "%s: note - new DMA when %d reset DMAs "
++		       "already in progress - "
++		       "now %"FMT_HPT", started %lu reset %lu stopped %lu\n",
++		       mmc_hostname(host->mmc),
++		       host_priv->dmas_pending,
++		       hptime(), since_ns(host_priv->when_started),
++		       since_ns(host_priv->when_reset),
++		       since_ns(host_priv->when_stopped));
++	host_priv->dmas_pending += 1;
++	host_priv->when_started = hptime();
++#endif
++	host_priv->dma_wanted = 1;
++	DBG("PDMA go - base %p handle %08X\n", dma_chan_base,
++	    host_priv->cb_handle);
++	bcm_dma_start(dma_chan_base, host_priv->cb_handle);
++}
++
++
++static void
++sdhci_platdma_read(struct sdhci_host *host, dma_addr_t dma_addr, size_t len)
++{
++	struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++
++	DBG("PDMA to read %d bytes\n", len);
++	host_priv->sg_done += len;
++	schci_bcm2708_cb_read(host_priv, 0, dma_addr, len, 1/*TRUE*/);
++	schci_bcm2708_dma_go(host);
++}
++
++
++static void
++sdhci_platdma_write(struct sdhci_host *host, dma_addr_t dma_addr, size_t len)
++{
++	struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++
++	DBG("PDMA to write %d bytes\n", len);
++	//BUG_ON(0 != (len & 0x1ff));
++
++	host_priv->sg_done += len;
++	schci_bcm2708_cb_write(host_priv, 0, dma_addr, len, 1/*TRUE*/);
++	schci_bcm2708_dma_go(host);
++}
++
++/*! space is avaiable to receive into or data is available to write
++  Platform DMA exported function
++*/
++void
++sdhci_bcm2708_platdma_avail(struct sdhci_host *host, unsigned int *ref_intmask,
++			    void(*completion_callback)(struct sdhci_host *host))
++{
++	struct mmc_data *data = host->data;
++	struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++	int sg_ix;
++	size_t bytes;
++	dma_addr_t addr;
++
++	BUG_ON(NULL == data);
++	BUG_ON(0 == data->blksz);
++
++	host_priv->complete = completion_callback;
++
++	sg_ix = host_priv->sg_ix;
++	BUG_ON(sg_ix >= data->sg_len);
++
++	/* we can DMA blocks larger than blksz - it may hang the DMA
++	   channel but we are its only user */
++	bytes = sg_dma_len(&data->sg[sg_ix]) - host_priv->sg_done;
++	addr = sg_dma_address(&data->sg[sg_ix]) + host_priv->sg_done;
++
++	if (bytes > 0) {
++		/* We're going to poll for read/write available state until
++		   we finish this DMA
++		*/
++
++		if (data->flags & MMC_DATA_READ) {
++			if (*ref_intmask & SDHCI_INT_DATA_AVAIL)  {
++				sdhci_unsignal_irqs(host, SDHCI_INT_DATA_AVAIL |
++						    SDHCI_INT_SPACE_AVAIL);
++				sdhci_platdma_read(host, addr, bytes);
++			}
++		} else {
++			if (*ref_intmask & SDHCI_INT_SPACE_AVAIL) {
++				sdhci_unsignal_irqs(host, SDHCI_INT_DATA_AVAIL |
++						    SDHCI_INT_SPACE_AVAIL);
++				sdhci_platdma_write(host, addr, bytes);
++			}
++		}
++	}
++	/* else:
++	   we have run out of bytes that need transferring (e.g. we may be in
++	   the middle of the last DMA transfer), or
++	   it is also possible that we've been called when another IRQ is
++	   signalled, even though we've turned off signalling of our own IRQ */
++
++	*ref_intmask &= ~SDHCI_INT_DATA_END;
++	/* don't let the main sdhci driver act on this .. we'll deal with it
++	   when we respond to the DMA - if one is currently in progress */
++}
++
++/* is it possible to DMA the given mmc_data structure?
++   Platform DMA exported function
++*/
++int /*bool*/
++sdhci_bcm2708_platdma_dmaable(struct sdhci_host *host, struct mmc_data *data)
++{
++	struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++	int ok = bcm_sg_suitable_for_dma(data->sg, data->sg_len);
++
++	if (!ok)
++		DBG("Reverting to PIO - bad cache alignment\n");
++
++	else {
++		host_priv->sg_ix = 0;	 /* first SG index */
++		host_priv->sg_done = 0;	 /* no bytes done */
++	}
++
++	return ok;
++}
++
++#include <mach/arm_control.h> //GRAYG
++/*! the current SD transacton has been abandonned
++  We need to tidy up if we were in the middle of a DMA
++  Platform DMA exported function
++*/
++void
++sdhci_bcm2708_platdma_reset(struct sdhci_host *host, struct mmc_data *data)
++{
++	struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++//	unsigned long flags;
++
++	BUG_ON(NULL == host);
++
++//	spin_lock_irqsave(&host->lock, flags);
++
++	if (host_priv->dma_wanted) {
++		if (NULL == data) {
++			printk(KERN_ERR "%s: ongoing DMA reset - no data!\n",
++			       mmc_hostname(host->mmc));
++			BUG_ON(NULL == data);
++		} else {
++			struct scatterlist *sg;
++			int sg_len;
++			int sg_todo;
++			int rc;
++			unsigned long cs;
++
++			sg = data->sg;
++			sg_len = data->sg_len;
++			sg_todo = sg_dma_len(&sg[host_priv->sg_ix]);
++
++			cs = readl(host_priv->dma_chan_base + BCM2708_DMA_CS);
++
++			if (!(BCM2708_DMA_ACTIVE & cs))
++			{
++				if (extra_messages)
++					printk(KERN_INFO "%s: missed completion of "
++				       "cmd %d DMA (%d/%d [%d]/[%d]) - "
++				       "ignoring it\n",
++				       mmc_hostname(host->mmc),
++				       host->last_cmdop,
++				       host_priv->sg_done, sg_todo,
++				       host_priv->sg_ix+1, sg_len);
++			}
++			else
++				printk(KERN_INFO "%s: resetting ongoing cmd %d"
++				       "DMA before %d/%d [%d]/[%d] complete\n",
++				       mmc_hostname(host->mmc),
++				       host->last_cmdop,
++				       host_priv->sg_done, sg_todo,
++				       host_priv->sg_ix+1, sg_len);
++#ifdef CHECK_DMA_USE
++			printk(KERN_INFO "%s: now %"FMT_HPT" started %lu "
++			       "last reset %lu last stopped %lu\n",
++			       mmc_hostname(host->mmc),
++			       hptime(), since_ns(host_priv->when_started),
++			       since_ns(host_priv->when_reset),
++			       since_ns(host_priv->when_stopped));
++			{	unsigned long info, debug;
++				void __iomem *base;
++				unsigned long pend0, pend1, pend2;
++
++				base = host_priv->dma_chan_base;
++				cs = readl(base + BCM2708_DMA_CS);
++				info = readl(base + BCM2708_DMA_INFO);
++				debug = readl(base + BCM2708_DMA_DEBUG);
++				printk(KERN_INFO "%s: DMA%d CS=%08lX TI=%08lX "
++				       "DEBUG=%08lX\n",
++				       mmc_hostname(host->mmc),
++                                       host_priv->dma_chan,
++				       cs, info, debug);
++				pend0 = readl(__io_address(ARM_IRQ_PEND0));
++				pend1 = readl(__io_address(ARM_IRQ_PEND1));
++				pend2 = readl(__io_address(ARM_IRQ_PEND2));
++
++				printk(KERN_INFO "%s: PEND0=%08lX "
++				       "PEND1=%08lX PEND2=%08lX\n",
++				       mmc_hostname(host->mmc),
++				       pend0, pend1, pend2);
++
++				//gintsts = readl(__io_address(GINTSTS));
++				//gintmsk = readl(__io_address(GINTMSK));
++				//printk(KERN_INFO "%s: USB GINTSTS=%08lX"
++				//	 "GINTMSK=%08lX\n",
++				//	 mmc_hostname(host->mmc), gintsts, gintmsk);
++			}
++#endif
++			rc = bcm_dma_abort(host_priv->dma_chan_base);
++			BUG_ON(rc != 0);
++		}
++		host_priv->dma_wanted = 0;
++#ifdef CHECK_DMA_USE
++		host_priv->when_reset = hptime();
++#endif
++	}
++
++//	spin_unlock_irqrestore(&host->lock, flags);
++}
++
++
++static void sdhci_bcm2708_dma_complete_irq(struct sdhci_host *host,
++					   u32 dma_cs)
++{
++	struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++	struct mmc_data *data;
++	struct scatterlist *sg;
++	int sg_len;
++	int sg_ix;
++	int sg_todo;
++//	unsigned long flags;
++
++	BUG_ON(NULL == host);
++
++//	spin_lock_irqsave(&host->lock, flags);
++	data = host->data;
++
++#ifdef CHECK_DMA_USE
++	if (host_priv->dmas_pending <= 0)
++		DBG("on completion no DMA in progress - "
++		    "now %"FMT_HPT" started %lu reset %lu stopped %lu\n",
++		    hptime(), since_ns(host_priv->when_started),
++		    since_ns(host_priv->when_reset),
++		    since_ns(host_priv->when_stopped));
++	else if (host_priv->dmas_pending > 1)
++		DBG("still %d DMA in progress after completion - "
++		    "now %"FMT_HPT" started %lu reset %lu stopped %lu\n",
++		    host_priv->dmas_pending - 1,
++		    hptime(), since_ns(host_priv->when_started),
++		    since_ns(host_priv->when_reset),
++		    since_ns(host_priv->when_stopped));
++	BUG_ON(host_priv->dmas_pending <= 0);
++	host_priv->dmas_pending -= 1;
++	host_priv->when_stopped = hptime();
++#endif
++	host_priv->dma_wanted = 0;
++
++	if (NULL == data) {
++		DBG("PDMA unused completion - status 0x%X\n", dma_cs);
++//		spin_unlock_irqrestore(&host->lock, flags);
++		return;
++	}
++	sg = data->sg;
++	sg_len = data->sg_len;
++	sg_todo = sg_dma_len(&sg[host_priv->sg_ix]);
++
++	DBG("PDMA complete %d/%d [%d]/[%d]..\n",
++	    host_priv->sg_done, sg_todo,
++	    host_priv->sg_ix+1, sg_len);
++
++	BUG_ON(host_priv->sg_done > sg_todo);
++
++	if (host_priv->sg_done >= sg_todo) {
++		host_priv->sg_ix++;
++		host_priv->sg_done = 0;
++	}
++
++	sg_ix = host_priv->sg_ix;
++	if (sg_ix < sg_len) {
++		u32 irq_mask;
++		/* Set off next DMA if we've got the capacity */
++
++		if (data->flags & MMC_DATA_READ)
++			irq_mask = SDHCI_INT_DATA_AVAIL;
++		else
++			irq_mask = SDHCI_INT_SPACE_AVAIL;
++
++		/* We have to use the interrupt status register on the BCM2708
++		   rather than the SDHCI_PRESENT_STATE register because latency
++		   in the glue logic means that the information retrieved from
++		   the latter is not always up-to-date w.r.t the DMA engine -
++		   it may not indicate that a read or a write is ready yet */
++		if (sdhci_bcm2708_raw_readl(host, SDHCI_INT_STATUS) &
++		    irq_mask) {
++			size_t bytes = sg_dma_len(&sg[sg_ix]) -
++				       host_priv->sg_done;
++			dma_addr_t addr = sg_dma_address(&data->sg[sg_ix]) +
++					  host_priv->sg_done;
++
++			/* acknowledge interrupt */
++			sdhci_bcm2708_raw_writel(host, irq_mask,
++						 SDHCI_INT_STATUS);
++
++			BUG_ON(0 == bytes);
++
++			if (data->flags & MMC_DATA_READ)
++				sdhci_platdma_read(host, addr, bytes);
++			else
++				sdhci_platdma_write(host, addr, bytes);
++		} else {
++			DBG("PDMA - wait avail\n");
++			/* may generate an IRQ if already present */
++			sdhci_signal_irqs(host, SDHCI_INT_DATA_AVAIL |
++						SDHCI_INT_SPACE_AVAIL);
++		}
++	} else {
++		if (sync_after_dma) {
++			/* On the Arasan controller the stop command (which will be
++			   scheduled after this completes) does not seem to work
++			   properly if we allow it to be issued when we are
++			   transferring data to/from the SD card.
++			   We get CRC and DEND errors unless we wait for
++			   the SD controller to finish reading/writing to the card. */
++			u32 state_mask;
++			int timeout=3*1000*1000;
++
++			DBG("PDMA over - sync card\n");
++			if (data->flags & MMC_DATA_READ)
++				state_mask = SDHCI_DOING_READ;
++			else
++				state_mask = SDHCI_DOING_WRITE;
++
++			while (0 != (sdhci_bcm2708_raw_readl(host, SDHCI_PRESENT_STATE)
++				& state_mask) && --timeout > 0)
++			{
++				udelay(1);
++				continue;
++			}
++			if (timeout <= 0)
++				printk(KERN_ERR"%s: final %s to SD card still "
++				       "running\n",
++				       mmc_hostname(host->mmc),
++				       data->flags & MMC_DATA_READ? "read": "write");
++		}
++		if (host_priv->complete) {
++			(*host_priv->complete)(host);
++			DBG("PDMA %s complete\n",
++			    data->flags & MMC_DATA_READ?"read":"write");
++			sdhci_signal_irqs(host, SDHCI_INT_DATA_AVAIL |
++						SDHCI_INT_SPACE_AVAIL);
++		}
++	}
++//	spin_unlock_irqrestore(&host->lock, flags);
++}
++
++static irqreturn_t sdhci_bcm2708_dma_irq(int irq, void *dev_id)
++{
++	irqreturn_t result = IRQ_NONE;
++	struct sdhci_host *host = dev_id;
++	struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++	u32 dma_cs; /* control and status register */
++
++	BUG_ON(NULL == dev_id);
++	BUG_ON(NULL == host_priv->dma_chan_base);
++
++	sdhci_spin_lock(host);
++
++	dma_cs = readl(host_priv->dma_chan_base + BCM2708_DMA_CS);
++
++	if (dma_cs & BCM2708_DMA_ERR) {
++		unsigned long debug;
++		debug = readl(host_priv->dma_chan_base +
++			      BCM2708_DMA_DEBUG);
++		printk(KERN_ERR "%s: DMA error - CS %lX DEBUG %lX\n",
++		       mmc_hostname(host->mmc), (unsigned long)dma_cs,
++		       (unsigned long)debug);
++		/* reset error */
++		writel(debug, host_priv->dma_chan_base +
++		       BCM2708_DMA_DEBUG);
++	}
++	if (dma_cs & BCM2708_DMA_INT) {
++		/* acknowledge interrupt */
++		writel(BCM2708_DMA_INT,
++		       host_priv->dma_chan_base + BCM2708_DMA_CS);
++
++		dsb(); /* ARM data synchronization (push) operation */
++
++		if (!host_priv->dma_wanted) {
++			/* ignore this interrupt - it was reset */
++			if (extra_messages)
++				printk(KERN_INFO "%s: DMA IRQ %X ignored - "
++			       "results were reset\n",
++			       mmc_hostname(host->mmc), dma_cs);
++#ifdef CHECK_DMA_USE
++			printk(KERN_INFO "%s: now %"FMT_HPT
++			       " started %lu reset %lu stopped %lu\n",
++			       mmc_hostname(host->mmc), hptime(),
++			       since_ns(host_priv->when_started),
++			       since_ns(host_priv->when_reset),
++			       since_ns(host_priv->when_stopped));
++			host_priv->dmas_pending--;
++#endif
++		} else
++			sdhci_bcm2708_dma_complete_irq(host, dma_cs);
++
++		result = IRQ_HANDLED;
++	}
++	sdhci_spin_unlock(host);
++
++	return result;
++}
++#endif /* CONFIG_MMC_SDHCI_BCM2708_DMA */
++
++
++/***************************************************************************** \
++ *									     *
++ * Device Attributes							     *
++ *									     *
++\*****************************************************************************/
++
++
++/**
++ * Show the DMA-using status
++ */
++static ssize_t attr_dma_show(struct device *_dev,
++			     struct device_attribute *attr, char *buf)
++{
++	struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev);
++
++	if (host) {
++		int use_dma = (host->flags & SDHCI_USE_PLATDMA? 1:0);
++		return sprintf(buf, "%d\n", use_dma);
++	} else
++		return -EINVAL;
++}
++
++/**
++ * Set the DMA-using status
++ */
++static ssize_t attr_dma_store(struct device *_dev,
++			      struct device_attribute *attr,
++			      const char *buf, size_t count)
++{
++	struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev);
++
++	if (host) {
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++		int on = simple_strtol(buf, NULL, 0);
++		if (on) {
++			host->flags |= SDHCI_USE_PLATDMA;
++			sdhci_bcm2708_writel(host, 1, REG_EXRDFIFO_EN);
++			printk(KERN_INFO "%s: DMA enabled\n",
++			       mmc_hostname(host->mmc));
++		} else {
++			host->flags &= ~(SDHCI_USE_PLATDMA | SDHCI_REQ_USE_DMA);
++			sdhci_bcm2708_writel(host, 0, REG_EXRDFIFO_EN);
++			printk(KERN_INFO "%s: DMA disabled\n",
++			       mmc_hostname(host->mmc));
++		}
++#endif
++		return count;
++	} else
++		return -EINVAL;
++}
++
++static DEVICE_ATTR(use_dma, S_IRUGO | S_IWUGO, attr_dma_show, attr_dma_store);
++
++
++/**
++ * Show the DMA wait states used
++ */
++static ssize_t attr_dmawait_show(struct device *_dev,
++			         struct device_attribute *attr, char *buf)
++{
++	struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev);
++
++	if (host) {
++		struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++		int dmawait = host_priv->dma_waits;
++		return sprintf(buf, "%d\n", dmawait);
++	} else
++		return -EINVAL;
++}
++
++/**
++ * Set the DMA wait state used
++ */
++static ssize_t attr_dmawait_store(struct device *_dev,
++			          struct device_attribute *attr,
++			          const char *buf, size_t count)
++{
++	struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev);
++
++	if (host) {
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++		struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++		int dma_waits = simple_strtol(buf, NULL, 0);
++		if (dma_waits >= 0 && dma_waits < 32)
++                        host_priv->dma_waits = dma_waits;
++		else
++			printk(KERN_ERR "%s: illegal dma_waits value - %d",
++			       mmc_hostname(host->mmc), dma_waits);
++#endif
++		return count;
++	} else
++		return -EINVAL;
++}
++
++static DEVICE_ATTR(dma_wait, S_IRUGO | S_IWUGO,
++                   attr_dmawait_show, attr_dmawait_store);
++
++
++/**
++ * Show the DMA-using status
++ */
++static ssize_t attr_status_show(struct device *_dev,
++				struct device_attribute *attr, char *buf)
++{
++	struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev);
++
++	if (host) {
++		struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++		return sprintf(buf,
++			       "present: yes\n"
++			       "power: %s\n"
++			       "clock: %u Hz\n"
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++			       "dma: %s (%d waits)\n",
++#else
++			       "dma: unconfigured\n",
++#endif
++			       "always on",
++			       host->clock
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++			       , (host->flags & SDHCI_USE_PLATDMA)? "on": "off"
++                               , host_priv->dma_waits
++#endif
++			       );
++	} else
++		return -EINVAL;
++}
++
++static DEVICE_ATTR(status, S_IRUGO, attr_status_show, NULL);
++
++/***************************************************************************** \
++ *									     *
++ * Power Management							     *
++ *									     *
++\*****************************************************************************/
++
++
++#ifdef CONFIG_PM
++static int sdhci_bcm2708_suspend(struct platform_device *dev, pm_message_t state)
++{
++	struct sdhci_host *host = (struct sdhci_host *)
++				  platform_get_drvdata(dev);
++	int ret = 0;
++
++	if (host->mmc) {
++		ret = mmc_suspend_host(host->mmc);
++	}
++
++	return ret;
++}
++
++static int sdhci_bcm2708_resume(struct platform_device *dev)
++{
++	struct sdhci_host *host = (struct sdhci_host *)
++				  platform_get_drvdata(dev);
++	int ret = 0;
++
++	if (host->mmc) {
++		ret = mmc_resume_host(host->mmc);
++	}
++
++	return ret;
++}
++#endif
++
++
++/*****************************************************************************\
++ *                                                                           *
++ * Device quirk functions. Implemented as local ops because the flags        *
++ * field is out of space with newer kernels. This implementation can be      *
++ * back ported to older kernels as well.                                     *
++\****************************************************************************/
++static unsigned int sdhci_bcm2708_quirk_extra_ints(struct sdhci_host *host)
++{
++        return 1;
++}
++
++static unsigned int sdhci_bcm2708_quirk_spurious_crc_acmd51(struct sdhci_host *host)
++{
++        return 1;
++}
++
++static unsigned int sdhci_bcm2708_missing_status(struct sdhci_host *host)
++{
++	return 1;
++}
++
++/***************************************************************************** \
++ *									     *
++ * Device ops								     *
++ *									     *
++\*****************************************************************************/
++
++static struct sdhci_ops sdhci_bcm2708_ops = {
++#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
++	.read_l = sdhci_bcm2708_readl,
++	.read_w = sdhci_bcm2708_readw,
++	.read_b = sdhci_bcm2708_readb,
++	.write_l = sdhci_bcm2708_writel,
++	.write_w = sdhci_bcm2708_writew,
++	.write_b = sdhci_bcm2708_writeb,
++#else
++#error The BCM2708 SDHCI driver needs CONFIG_MMC_SDHCI_IO_ACCESSORS to be set
++#endif
++	.get_max_clock = sdhci_bcm2708_get_max_clock,
++
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++	// Platform DMA operations
++	.pdma_able  = sdhci_bcm2708_platdma_dmaable,
++	.pdma_avail = sdhci_bcm2708_platdma_avail,
++	.pdma_reset = sdhci_bcm2708_platdma_reset,
++#endif
++	.extra_ints = sdhci_bcm2708_quirk_extra_ints,
++};
++
++/*****************************************************************************\
++ *									     *
++ * Device probing/removal						     *
++ *									     *
++\*****************************************************************************/
++
++static int sdhci_bcm2708_probe(struct platform_device *pdev)
++{
++	struct sdhci_host *host;
++	struct resource *iomem;
++	struct sdhci_bcm2708_priv *host_priv;
++	int ret;
++
++	BUG_ON(pdev == NULL);
++
++	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!iomem) {
++		ret = -ENOMEM;
++		goto err;
++	}
++
++	if (resource_size(iomem) != 0x100)
++		dev_err(&pdev->dev, "Invalid iomem size. You may "
++			"experience problems.\n");
++
++	if (pdev->dev.parent)
++		host = sdhci_alloc_host(pdev->dev.parent,
++					sizeof(struct sdhci_bcm2708_priv));
++	else
++		host = sdhci_alloc_host(&pdev->dev,
++					sizeof(struct sdhci_bcm2708_priv));
++
++	if (IS_ERR(host)) {
++		ret = PTR_ERR(host);
++		goto err;
++	}
++	if (missing_status) {
++		sdhci_bcm2708_ops.missing_status = sdhci_bcm2708_missing_status;
++	}
++
++	if( spurious_crc_acmd51 ) {
++		sdhci_bcm2708_ops.spurious_crc_acmd51 = sdhci_bcm2708_quirk_spurious_crc_acmd51;
++	}
++
++
++	printk("sdhci: %s low-latency mode\n",enable_llm?"Enable":"Disable");
++
++	host->hw_name = "BCM2708_Arasan";
++	host->ops = &sdhci_bcm2708_ops;
++	host->irq = platform_get_irq(pdev, 0);
++	host->second_irq = 0;
++
++	host->quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
++		       SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
++		       SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
++               SDHCI_QUIRK_MISSING_CAPS |
++               SDHCI_QUIRK_NO_HISPD_BIT |
++               (sync_after_dma ? 0:SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12);
++
++
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++	host->flags = SDHCI_USE_PLATDMA;
++#endif
++
++	if (!request_mem_region(iomem->start, resource_size(iomem),
++				mmc_hostname(host->mmc))) {
++		dev_err(&pdev->dev, "cannot request region\n");
++		ret = -EBUSY;
++		goto err_request;
++	}
++
++	host->ioaddr = ioremap(iomem->start, resource_size(iomem));
++	if (!host->ioaddr) {
++		dev_err(&pdev->dev, "failed to remap registers\n");
++		ret = -ENOMEM;
++		goto err_remap;
++	}
++
++	host_priv = SDHCI_HOST_PRIV(host);
++
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++	host_priv->dma_wanted = 0;
++#ifdef CHECK_DMA_USE
++	host_priv->dmas_pending = 0;
++	host_priv->when_started = 0;
++	host_priv->when_reset = 0;
++	host_priv->when_stopped = 0;
++#endif
++	host_priv->sg_ix = 0;
++	host_priv->sg_done = 0;
++	host_priv->complete = NULL;
++	host_priv->dma_waits = SDHCI_BCM_DMA_WAITS;
++
++	host_priv->cb_base = dma_alloc_writecombine(&pdev->dev, SZ_4K,
++						    &host_priv->cb_handle,
++						    GFP_KERNEL);
++	if (!host_priv->cb_base) {
++		dev_err(&pdev->dev, "cannot allocate DMA CBs\n");
++		ret = -ENOMEM;
++		goto err_alloc_cb;
++	}
++
++	ret = bcm_dma_chan_alloc(BCM_DMA_FEATURE_FAST,
++				 &host_priv->dma_chan_base,
++				 &host_priv->dma_irq);
++	if (ret < 0) {
++		dev_err(&pdev->dev, "couldn't allocate a DMA channel\n");
++		goto err_add_dma;
++	}
++	host_priv->dma_chan = ret;
++
++	ret = request_irq(host_priv->dma_irq, sdhci_bcm2708_dma_irq,
++			  0 /*IRQF_SHARED*/, DRIVER_NAME " (dma)", host);
++	if (ret) {
++		dev_err(&pdev->dev, "cannot set DMA IRQ\n");
++		goto err_add_dma_irq;
++	}
++	host->second_irq = host_priv->dma_irq;
++	DBG("DMA CBs %p handle %08X DMA%d %p DMA IRQ %d\n",
++	    host_priv->cb_base, (unsigned)host_priv->cb_handle,
++	    host_priv->dma_chan, host_priv->dma_chan_base,
++	    host_priv->dma_irq);
++
++    // we support 3.3V
++    host->caps |= SDHCI_CAN_VDD_330;
++    if (allow_highspeed)
++        host->mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
++
++    /* single block writes cause data loss with some SD cards! */
++    host->mmc->caps2 |= MMC_CAP2_FORCE_MULTIBLOCK;
++#endif
++
++	ret = sdhci_add_host(host);
++	if (ret)
++		goto err_add_host;
++
++	platform_set_drvdata(pdev, host);
++	ret = device_create_file(&pdev->dev, &dev_attr_use_dma);
++	ret = device_create_file(&pdev->dev, &dev_attr_dma_wait);
++	ret = device_create_file(&pdev->dev, &dev_attr_status);
++
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++	/* enable extension fifo for paced DMA transfers */
++	sdhci_bcm2708_writel(host, 1, REG_EXRDFIFO_EN);
++	sdhci_bcm2708_writel(host, 4, REG_EXRDFIFO_CFG);
++#endif
++
++	printk(KERN_INFO "%s: BCM2708 SDHC host at 0x%08llx DMA %d IRQ %d\n",
++	       mmc_hostname(host->mmc), (unsigned long long)iomem->start,
++	       host_priv->dma_chan, host_priv->dma_irq);
++
++	return 0;
++
++err_add_host:
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++	free_irq(host_priv->dma_irq, host);
++err_add_dma_irq:
++	bcm_dma_chan_free(host_priv->dma_chan);
++err_add_dma:
++	dma_free_writecombine(&pdev->dev, SZ_4K, host_priv->cb_base,
++			      host_priv->cb_handle);
++err_alloc_cb:
++#endif
++	iounmap(host->ioaddr);
++err_remap:
++	release_mem_region(iomem->start, resource_size(iomem));
++err_request:
++	sdhci_free_host(host);
++err:
++	dev_err(&pdev->dev, "probe failed, err %d\n", ret);
++	return ret;
++}
++
++static int sdhci_bcm2708_remove(struct platform_device *pdev)
++{
++	struct sdhci_host *host = platform_get_drvdata(pdev);
++	struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
++	int dead;
++	u32 scratch;
++
++	dead = 0;
++	scratch = sdhci_bcm2708_readl(host, SDHCI_INT_STATUS);
++	if (scratch == (u32)-1)
++		dead = 1;
++
++	device_remove_file(&pdev->dev, &dev_attr_status);
++	device_remove_file(&pdev->dev, &dev_attr_dma_wait);
++	device_remove_file(&pdev->dev, &dev_attr_use_dma);
++
++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
++	free_irq(host_priv->dma_irq, host);
++	dma_free_writecombine(&pdev->dev, SZ_4K, host_priv->cb_base,
++			      host_priv->cb_handle);
++#endif
++	sdhci_remove_host(host, dead);
++	iounmap(host->ioaddr);
++	release_mem_region(iomem->start, resource_size(iomem));
++	sdhci_free_host(host);
++	platform_set_drvdata(pdev, NULL);
++
++	return 0;
++}
++
++static struct platform_driver sdhci_bcm2708_driver = {
++	.driver = {
++		.name	= DRIVER_NAME,
++		.owner	= THIS_MODULE,
++	},
++	.probe		= sdhci_bcm2708_probe,
++	.remove		= sdhci_bcm2708_remove,
++
++#ifdef CONFIG_PM
++	.suspend = sdhci_bcm2708_suspend,
++	.resume = sdhci_bcm2708_resume,
++#endif
++
++};
++
++/*****************************************************************************\
++ *									     *
++ * Driver init/exit							     *
++ *									     *
++\*****************************************************************************/
++
++static int __init sdhci_drv_init(void)
++{
++	return platform_driver_register(&sdhci_bcm2708_driver);
++}
++
++static void __exit sdhci_drv_exit(void)
++{
++	platform_driver_unregister(&sdhci_bcm2708_driver);
++}
++
++module_init(sdhci_drv_init);
++module_exit(sdhci_drv_exit);
++
++module_param(allow_highspeed, bool, 0444);
++module_param(emmc_clock_freq, int, 0444);
++module_param(sync_after_dma, bool, 0444);
++module_param(missing_status, bool, 0444);
++module_param(spurious_crc_acmd51, bool, 0444);
++module_param(enable_llm, bool, 0444);
++module_param(cycle_delay, int, 0444);
++module_param(extra_messages, bool, 0444);
++
++MODULE_DESCRIPTION("Secure Digital Host Controller Interface platform driver");
++MODULE_AUTHOR("Broadcom <info@broadcom.com>");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:"DRIVER_NAME);
++
++MODULE_PARM_DESC(allow_highspeed, "Allow high speed transfers modes");
++MODULE_PARM_DESC(emmc_clock_freq, "Specify the speed of emmc clock");
++MODULE_PARM_DESC(sync_after_dma, "Block in driver until dma complete");
++MODULE_PARM_DESC(missing_status, "Use the missing status quirk");
++MODULE_PARM_DESC(spurious_crc_acmd51, "Use the spurious crc quirk for reading SCR (ACMD51)");
++MODULE_PARM_DESC(enable_llm, "Enable low-latency mode");
++MODULE_PARM_DESC(extra_messages, "Enable more sdcard warning messages");
++
++
+diff -Nur linux-3.12.6/drivers/mmc/host/sdhci.c linux-raspberry-pi/drivers/mmc/host/sdhci.c
+--- linux-3.12.6/drivers/mmc/host/sdhci.c	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/mmc/host/sdhci.c	2013-12-29 10:40:59.000000000 +0100
+@@ -28,6 +28,7 @@
+ #include <linux/mmc/mmc.h>
+ #include <linux/mmc/host.h>
+ #include <linux/mmc/card.h>
++#include <linux/mmc/sd.h>
+ #include <linux/mmc/slot-gpio.h>
+ 
+ #include "sdhci.h"
+@@ -131,6 +132,99 @@
+  * Low level functions                                                       *
+  *                                                                           *
+ \*****************************************************************************/
++extern bool enable_llm;
++static int sdhci_locked=0;
++void sdhci_spin_lock(struct sdhci_host *host)
++{
++	spin_lock(&host->lock);
++#ifdef CONFIG_PREEMPT
++	if(enable_llm)
++	{
++		disable_irq_nosync(host->irq);
++		if(host->second_irq)
++			disable_irq_nosync(host->second_irq);
++		local_irq_enable();
++	}
++#endif
++}
++
++void sdhci_spin_unlock(struct sdhci_host *host)
++{
++#ifdef CONFIG_PREEMPT
++	if(enable_llm)
++	{
++		local_irq_disable();
++		if(host->second_irq)
++			enable_irq(host->second_irq);
++		enable_irq(host->irq);
++	}
++#endif
++	spin_unlock(&host->lock);
++}
++
++void sdhci_spin_lock_irqsave(struct sdhci_host *host,unsigned long *flags)
++{
++#ifdef CONFIG_PREEMPT
++	if(enable_llm)
++	{
++		while(sdhci_locked)
++		{
++			preempt_schedule();
++		}
++		spin_lock_irqsave(&host->lock,*flags);
++		disable_irq(host->irq);
++		if(host->second_irq)
++			disable_irq(host->second_irq);
++		local_irq_enable();
++	}
++	else
++#endif
++		spin_lock_irqsave(&host->lock,*flags);
++}
++
++void sdhci_spin_unlock_irqrestore(struct sdhci_host *host,unsigned long flags)
++{
++#ifdef CONFIG_PREEMPT
++	if(enable_llm)
++	{
++		local_irq_disable();
++		if(host->second_irq)
++			enable_irq(host->second_irq);
++		enable_irq(host->irq);
++	}
++#endif
++	spin_unlock_irqrestore(&host->lock,flags);
++}
++
++static void sdhci_spin_enable_schedule(struct sdhci_host *host)
++{
++#ifdef CONFIG_PREEMPT
++	if(enable_llm)
++	{
++		sdhci_locked = 1;
++		preempt_enable();
++	}
++#endif
++}
++
++static void sdhci_spin_disable_schedule(struct sdhci_host *host)
++{
++#ifdef CONFIG_PREEMPT
++	if(enable_llm)
++	{
++		preempt_disable();
++		sdhci_locked = 0;
++	}
++#endif
++}
++
++
++#undef spin_lock_irqsave
++#define spin_lock_irqsave(host_lock, flags)      sdhci_spin_lock_irqsave(container_of(host_lock, struct sdhci_host, lock), &flags)
++#define spin_unlock_irqrestore(host_lock, flags) sdhci_spin_unlock_irqrestore(container_of(host_lock, struct sdhci_host, lock), flags)
++
++#define spin_lock(host_lock)   sdhci_spin_lock(container_of(host_lock, struct sdhci_host, lock))
++#define spin_unlock(host_lock) sdhci_spin_unlock(container_of(host_lock, struct sdhci_host, lock))
+ 
+ static void sdhci_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set)
+ {
+@@ -300,7 +394,7 @@
+ 	struct sdhci_host *host = container_of(led, struct sdhci_host, led);
+ 	unsigned long flags;
+ 
+-	spin_lock_irqsave(&host->lock, flags);
++	sdhci_spin_lock_irqsave(host, &flags);
+ 
+ 	if (host->runtime_suspended)
+ 		goto out;
+@@ -310,7 +404,7 @@
+ 	else
+ 		sdhci_activate_led(host);
+ out:
+-	spin_unlock_irqrestore(&host->lock, flags);
++	sdhci_spin_unlock_irqrestore(host, flags);
+ }
+ #endif
+ 
+@@ -327,7 +421,7 @@
+ 	u32 uninitialized_var(scratch);
+ 	u8 *buf;
+ 
+-	DBG("PIO reading\n");
++	DBG("PIO reading %db\n", host->data->blksz);
+ 
+ 	blksize = host->data->blksz;
+ 	chunk = 0;
+@@ -372,7 +466,7 @@
+ 	u32 scratch;
+ 	u8 *buf;
+ 
+-	DBG("PIO writing\n");
++	DBG("PIO writing %db\n", host->data->blksz);
+ 
+ 	blksize = host->data->blksz;
+ 	chunk = 0;
+@@ -411,19 +505,28 @@
+ 	local_irq_restore(flags);
+ }
+ 
+-static void sdhci_transfer_pio(struct sdhci_host *host)
++static void sdhci_transfer_pio(struct sdhci_host *host, u32 intstate)
+ {
+ 	u32 mask;
++	u32 state = 0;
++	u32 intmask;
++	int available;
+ 
+ 	BUG_ON(!host->data);
+ 
+ 	if (host->blocks == 0)
+ 		return;
+ 
+-	if (host->data->flags & MMC_DATA_READ)
++	if (host->data->flags & MMC_DATA_READ) {
+ 		mask = SDHCI_DATA_AVAILABLE;
+-	else
++		intmask = SDHCI_INT_DATA_AVAIL;
++	} else {
+ 		mask = SDHCI_SPACE_AVAILABLE;
++		intmask = SDHCI_INT_SPACE_AVAIL;
++	}
++
++	/* initially we can see whether we can procede using intstate */
++	available = (intstate & intmask);
+ 
+ 	/*
+ 	 * Some controllers (JMicron JMB38x) mess up the buffer bits
+@@ -434,7 +537,7 @@
+ 		(host->data->blocks == 1))
+ 		mask = ~0;
+ 
+-	while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
++	while (available) {
+ 		if (host->quirks & SDHCI_QUIRK_PIO_NEEDS_DELAY)
+ 			udelay(100);
+ 
+@@ -446,9 +549,12 @@
+ 		host->blocks--;
+ 		if (host->blocks == 0)
+ 			break;
++		state = sdhci_readl(host, SDHCI_PRESENT_STATE);
++		available = state & mask;
++		break;
+ 	}
+ 
+-	DBG("PIO transfer complete.\n");
++	DBG("PIO transfer complete - %d blocks left.\n", host->blocks);
+ }
+ 
+ static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags)
+@@ -721,7 +827,9 @@
+ 	u32 pio_irqs = SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL;
+ 	u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR;
+ 
+-	if (host->flags & SDHCI_REQ_USE_DMA)
++	/* platform DMA will begin on receipt of PIO irqs */
++	if ((host->flags & SDHCI_REQ_USE_DMA) &&
++	    !(host->flags & SDHCI_USE_PLATDMA))
+ 		sdhci_clear_set_irqs(host, pio_irqs, dma_irqs);
+ 	else
+ 		sdhci_clear_set_irqs(host, dma_irqs, pio_irqs);
+@@ -753,44 +861,25 @@
+ 	host->data_early = 0;
+ 	host->data->bytes_xfered = 0;
+ 
+-	if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))
++	if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA | SDHCI_USE_PLATDMA))
+ 		host->flags |= SDHCI_REQ_USE_DMA;
+ 
+ 	/*
+ 	 * FIXME: This doesn't account for merging when mapping the
+ 	 * scatterlist.
+ 	 */
+-	if (host->flags & SDHCI_REQ_USE_DMA) {
+-		int broken, i;
+-		struct scatterlist *sg;
+-
+-		broken = 0;
+-		if (host->flags & SDHCI_USE_ADMA) {
+-			if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
+-				broken = 1;
+-		} else {
+-			if (host->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE)
+-				broken = 1;
+-		}
+-
+-		if (unlikely(broken)) {
+-			for_each_sg(data->sg, sg, data->sg_len, i) {
+-				if (sg->length & 0x3) {
+-					DBG("Reverting to PIO because of "
+-						"transfer size (%d)\n",
+-						sg->length);
+-					host->flags &= ~SDHCI_REQ_USE_DMA;
+-					break;
+-				}
+-			}
+-		}
+-	}
+ 
+ 	/*
+ 	 * The assumption here being that alignment is the same after
+ 	 * translation to device address space.
+ 	 */
+-	if (host->flags & SDHCI_REQ_USE_DMA) {
++	if ((host->flags & (SDHCI_REQ_USE_DMA | SDHCI_USE_PLATDMA)) ==
++	    (SDHCI_REQ_USE_DMA | SDHCI_USE_PLATDMA)) {
++
++		if (! sdhci_platdma_dmaable(host, data))
++			host->flags &= ~SDHCI_REQ_USE_DMA;
++
++	} else if (host->flags & SDHCI_REQ_USE_DMA) {
+ 		int broken, i;
+ 		struct scatterlist *sg;
+ 
+@@ -849,7 +938,8 @@
+ 				 */
+ 				WARN_ON(1);
+ 				host->flags &= ~SDHCI_REQ_USE_DMA;
+-			} else {
++			} else
++			if (!(host->flags & SDHCI_USE_PLATDMA)) {
+ 				WARN_ON(sg_cnt != 1);
+ 				sdhci_writel(host, sg_dma_address(data->sg),
+ 					SDHCI_DMA_ADDRESS);
+@@ -865,11 +955,13 @@
+ 	if (host->version >= SDHCI_SPEC_200) {
+ 		ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+ 		ctrl &= ~SDHCI_CTRL_DMA_MASK;
++		if (! (host->flags & SDHCI_USE_PLATDMA)) {
+ 		if ((host->flags & SDHCI_REQ_USE_DMA) &&
+ 			(host->flags & SDHCI_USE_ADMA))
+ 			ctrl |= SDHCI_CTRL_ADMA32;
+ 		else
+ 			ctrl |= SDHCI_CTRL_SDMA;
++		}
+ 		sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+ 	}
+ 
+@@ -921,7 +1013,8 @@
+ 
+ 	if (data->flags & MMC_DATA_READ)
+ 		mode |= SDHCI_TRNS_READ;
+-	if (host->flags & SDHCI_REQ_USE_DMA)
++	if ((host->flags & SDHCI_REQ_USE_DMA) &&
++	    !(host->flags & SDHCI_USE_PLATDMA))
+ 		mode |= SDHCI_TRNS_DMA;
+ 
+ 	sdhci_writew(host, mode, SDHCI_TRANSFER_MODE);
+@@ -937,13 +1030,16 @@
+ 	host->data = NULL;
+ 
+ 	if (host->flags & SDHCI_REQ_USE_DMA) {
+-		if (host->flags & SDHCI_USE_ADMA)
+-			sdhci_adma_table_post(host, data);
+-		else {
++		/* we may have to abandon an ongoing platform DMA */
++		if (host->flags & SDHCI_USE_PLATDMA)
++			sdhci_platdma_reset(host, data);
++
++		if (host->flags & (SDHCI_USE_PLATDMA | SDHCI_USE_SDMA)) {
+ 			dma_unmap_sg(mmc_dev(host->mmc), data->sg,
+ 				data->sg_len, (data->flags & MMC_DATA_READ) ?
+ 					DMA_FROM_DEVICE : DMA_TO_DEVICE);
+-		}
++		} else if (host->flags & SDHCI_USE_ADMA)
++                        sdhci_adma_table_post(host, data);
+ 	}
+ 
+ 	/*
+@@ -996,6 +1092,12 @@
+ 	if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
+ 		mask |= SDHCI_DATA_INHIBIT;
+ 
++	if(host->ops->missing_status && (cmd->opcode == MMC_SEND_STATUS)) {
++		timeout = 5000; // Really obscenely large delay to send the status, due to bug in controller
++				// which might cause the STATUS command to get stuck when a data operation is in flow
++		mask |= SDHCI_DATA_INHIBIT;
++	}
++
+ 	/* We shouldn't wait for data inihibit for stop commands, even
+ 	   though they might use busy signaling */
+ 	if (host->mrq->data && (cmd == host->mrq->data->stop))
+@@ -1011,12 +1113,20 @@
+ 			return;
+ 		}
+ 		timeout--;
++		sdhci_spin_enable_schedule(host);
+ 		mdelay(1);
++		sdhci_spin_disable_schedule(host);
+ 	}
++	DBG("send cmd %d - wait 0x%X irq 0x%x\n", cmd->opcode, mask,
++	    sdhci_readl(host, SDHCI_INT_STATUS));
+ 
+ 	mod_timer(&host->timer, jiffies + 10 * HZ);
+ 
+ 	host->cmd = cmd;
++	if (host->last_cmdop == MMC_APP_CMD)
++		host->last_cmdop = -cmd->opcode;
++	else
++		host->last_cmdop = cmd->opcode;
+ 
+ 	sdhci_prepare_data(host, cmd);
+ 
+@@ -1232,7 +1342,9 @@
+ 			return;
+ 		}
+ 		timeout--;
++		sdhci_spin_enable_schedule(host);
+ 		mdelay(1);
++		sdhci_spin_disable_schedule(host);
+ 	}
+ 
+ 	clk |= SDHCI_CLOCK_CARD_EN;
+@@ -1333,7 +1445,7 @@
+ 
+ 	sdhci_runtime_pm_get(host);
+ 
+-	spin_lock_irqsave(&host->lock, flags);
++	sdhci_spin_lock_irqsave(host, &flags);
+ 
+ 	WARN_ON(host->mrq != NULL);
+ 
+@@ -1391,9 +1503,9 @@
+ 					mmc->card->type == MMC_TYPE_MMC ?
+ 					MMC_SEND_TUNING_BLOCK_HS200 :
+ 					MMC_SEND_TUNING_BLOCK;
+-				spin_unlock_irqrestore(&host->lock, flags);
++				sdhci_spin_unlock_irqrestore(host, flags);
+ 				sdhci_execute_tuning(mmc, tuning_opcode);
+-				spin_lock_irqsave(&host->lock, flags);
++				sdhci_spin_lock_irqsave(host, &flags);
+ 
+ 				/* Restore original mmc_request structure */
+ 				host->mrq = mrq;
+@@ -1407,7 +1519,7 @@
+ 	}
+ 
+ 	mmiowb();
+-	spin_unlock_irqrestore(&host->lock, flags);
++	sdhci_spin_unlock_irqrestore(host, flags);
+ }
+ 
+ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
+@@ -1416,10 +1528,10 @@
+ 	int vdd_bit = -1;
+ 	u8 ctrl;
+ 
+-	spin_lock_irqsave(&host->lock, flags);
++	sdhci_spin_lock_irqsave(host, &flags);
+ 
+ 	if (host->flags & SDHCI_DEVICE_DEAD) {
+-		spin_unlock_irqrestore(&host->lock, flags);
++		sdhci_spin_unlock_irqrestore(host, flags);
+ 		if (host->vmmc && ios->power_mode == MMC_POWER_OFF)
+ 			mmc_regulator_set_ocr(host->mmc, host->vmmc, 0);
+ 		return;
+@@ -1446,9 +1558,9 @@
+ 		vdd_bit = sdhci_set_power(host, ios->vdd);
+ 
+ 	if (host->vmmc && vdd_bit != -1) {
+-		spin_unlock_irqrestore(&host->lock, flags);
++		sdhci_spin_unlock_irqrestore(host, flags);
+ 		mmc_regulator_set_ocr(host->mmc, host->vmmc, vdd_bit);
+-		spin_lock_irqsave(&host->lock, flags);
++		sdhci_spin_lock_irqsave(host, &flags);
+ 	}
+ 
+ 	if (host->ops->platform_send_init_74_clocks)
+@@ -1585,7 +1697,7 @@
+ 		sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
+ 
+ 	mmiowb();
+-	spin_unlock_irqrestore(&host->lock, flags);
++	sdhci_spin_unlock_irqrestore(host, flags);
+ }
+ 
+ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+@@ -1633,7 +1745,7 @@
+ 	unsigned long flags;
+ 	int is_readonly;
+ 
+-	spin_lock_irqsave(&host->lock, flags);
++	sdhci_spin_lock_irqsave(host, &flags);
+ 
+ 	if (host->flags & SDHCI_DEVICE_DEAD)
+ 		is_readonly = 0;
+@@ -1643,7 +1755,7 @@
+ 		is_readonly = !(sdhci_readl(host, SDHCI_PRESENT_STATE)
+ 				& SDHCI_WRITE_PROTECT);
+ 
+-	spin_unlock_irqrestore(&host->lock, flags);
++	sdhci_spin_unlock_irqrestore(host, flags);
+ 
+ 	/* This quirk needs to be replaced by a callback-function later */
+ 	return host->quirks & SDHCI_QUIRK_INVERTED_WRITE_PROTECT ?
+@@ -1716,9 +1828,9 @@
+ 	struct sdhci_host *host = mmc_priv(mmc);
+ 	unsigned long flags;
+ 
+-	spin_lock_irqsave(&host->lock, flags);
++	sdhci_spin_lock_irqsave(host, &flags);
+ 	sdhci_enable_sdio_irq_nolock(host, enable);
+-	spin_unlock_irqrestore(&host->lock, flags);
++	sdhci_spin_unlock_irqrestore(host, flags);
+ }
+ 
+ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
+@@ -2066,7 +2178,7 @@
+ 	if (host->ops->card_event)
+ 		host->ops->card_event(host);
+ 
+-	spin_lock_irqsave(&host->lock, flags);
++	sdhci_spin_lock_irqsave(host, &flags);
+ 
+ 	/* Check host->mrq first in case we are runtime suspended */
+ 	if (host->mrq && !sdhci_do_get_cd(host)) {
+@@ -2082,7 +2194,7 @@
+ 		tasklet_schedule(&host->finish_tasklet);
+ 	}
+ 
+-	spin_unlock_irqrestore(&host->lock, flags);
++	sdhci_spin_unlock_irqrestore(host, flags);
+ }
+ 
+ static const struct mmc_host_ops sdhci_ops = {
+@@ -2121,14 +2233,14 @@
+ 
+ 	host = (struct sdhci_host*)param;
+ 
+-	spin_lock_irqsave(&host->lock, flags);
++	sdhci_spin_lock_irqsave(host, &flags);
+ 
+         /*
+          * If this tasklet gets rescheduled while running, it will
+          * be run again afterwards but without any active request.
+          */
+ 	if (!host->mrq) {
+-		spin_unlock_irqrestore(&host->lock, flags);
++		sdhci_spin_unlock_irqrestore(host, flags);
+ 		return;
+ 	}
+ 
+@@ -2166,7 +2278,7 @@
+ #endif
+ 
+ 	mmiowb();
+-	spin_unlock_irqrestore(&host->lock, flags);
++	sdhci_spin_unlock_irqrestore(host, flags);
+ 
+ 	mmc_request_done(host->mmc, mrq);
+ 	sdhci_runtime_pm_put(host);
+@@ -2179,11 +2291,11 @@
+ 
+ 	host = (struct sdhci_host*)data;
+ 
+-	spin_lock_irqsave(&host->lock, flags);
++	sdhci_spin_lock_irqsave(host, &flags);
+ 
+ 	if (host->mrq) {
+ 		pr_err("%s: Timeout waiting for hardware "
+-			"interrupt.\n", mmc_hostname(host->mmc));
++			"interrupt - cmd%d.\n", mmc_hostname(host->mmc), host->last_cmdop);
+ 		sdhci_dumpregs(host);
+ 
+ 		if (host->data) {
+@@ -2200,7 +2312,7 @@
+ 	}
+ 
+ 	mmiowb();
+-	spin_unlock_irqrestore(&host->lock, flags);
++	sdhci_spin_unlock_irqrestore(host, flags);
+ }
+ 
+ static void sdhci_tuning_timer(unsigned long data)
+@@ -2210,11 +2322,11 @@
+ 
+ 	host = (struct sdhci_host *)data;
+ 
+-	spin_lock_irqsave(&host->lock, flags);
++	sdhci_spin_lock_irqsave(host, &flags);
+ 
+ 	host->flags |= SDHCI_NEEDS_RETUNING;
+ 
+-	spin_unlock_irqrestore(&host->lock, flags);
++	sdhci_spin_unlock_irqrestore(host, flags);
+ }
+ 
+ /*****************************************************************************\
+@@ -2228,10 +2340,13 @@
+ 	BUG_ON(intmask == 0);
+ 
+ 	if (!host->cmd) {
++		if (!(host->ops->extra_ints)) {
+ 		pr_err("%s: Got command interrupt 0x%08x even "
+ 			"though no command operation was in progress.\n",
+ 			mmc_hostname(host->mmc), (unsigned)intmask);
+ 		sdhci_dumpregs(host);
++		} else
++			DBG("cmd irq 0x%08x cmd complete\n", (unsigned)intmask);
+ 		return;
+ 	}
+ 
+@@ -2301,6 +2416,19 @@
+ static void sdhci_show_adma_error(struct sdhci_host *host) { }
+ #endif
+ 
++static void sdhci_data_end(struct sdhci_host *host)
++{
++	if (host->cmd) {
++		/*
++		 * Data managed to finish before the
++		 * command completed. Make sure we do
++		 * things in the proper order.
++		 */
++		host->data_early = 1;
++	} else
++		sdhci_finish_data(host);
++}
++
+ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
+ {
+ 	u32 command;
+@@ -2330,23 +2458,39 @@
+ 			}
+ 		}
+ 
++		if (!(host->ops->extra_ints)) {
+ 		pr_err("%s: Got data interrupt 0x%08x even "
+ 			"though no data operation was in progress.\n",
+ 			mmc_hostname(host->mmc), (unsigned)intmask);
+ 		sdhci_dumpregs(host);
++		} else
++			DBG("data irq 0x%08x but no data\n", (unsigned)intmask);
+ 
+ 		return;
+ 	}
+ 
+ 	if (intmask & SDHCI_INT_DATA_TIMEOUT)
+ 		host->data->error = -ETIMEDOUT;
+-	else if (intmask & SDHCI_INT_DATA_END_BIT)
++	else if (intmask & SDHCI_INT_DATA_END_BIT) {
++		DBG("end error in cmd %d\n", host->last_cmdop);
++		if (host->ops->spurious_crc_acmd51 &&
++		    host->last_cmdop == -SD_APP_SEND_SCR) {
++			DBG("ignoring spurious data_end_bit error\n");
++			intmask = SDHCI_INT_DATA_AVAIL|SDHCI_INT_DATA_END;
++		} else
+ 		host->data->error = -EILSEQ;
+-	else if ((intmask & SDHCI_INT_DATA_CRC) &&
++	} else if ((intmask & SDHCI_INT_DATA_CRC) &&
+ 		SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))
+-			!= MMC_BUS_TEST_R)
++			!= MMC_BUS_TEST_R) {
++		DBG("crc error in cmd %d\n", host->last_cmdop);
++		if (host->ops->spurious_crc_acmd51 &&
++				host->last_cmdop == -SD_APP_SEND_SCR) {
++			DBG("ignoring spurious data_crc_bit error\n");
++			intmask = SDHCI_INT_DATA_AVAIL|SDHCI_INT_DATA_END;
++		} else {
+ 		host->data->error = -EILSEQ;
+-	else if (intmask & SDHCI_INT_ADMA_ERROR) {
++		}
++	} else if (intmask & SDHCI_INT_ADMA_ERROR) {
+ 		pr_err("%s: ADMA error\n", mmc_hostname(host->mmc));
+ 		sdhci_show_adma_error(host);
+ 		host->data->error = -EIO;
+@@ -2354,11 +2498,18 @@
+ 			host->ops->adma_workaround(host, intmask);
+ 	}
+ 
+-	if (host->data->error)
++	if (host->data->error) {
++		DBG("finish request early on error %d\n", host->data->error);
+ 		sdhci_finish_data(host);
+-	else {
+-		if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL))
+-			sdhci_transfer_pio(host);
++	} else {
++		if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL)) {
++			if (host->flags & SDHCI_REQ_USE_DMA) {
++				/* possible only in PLATDMA mode */
++				sdhci_platdma_avail(host, &intmask,
++						&sdhci_data_end);
++			} else
++				sdhci_transfer_pio(host, intmask);
++		}
+ 
+ 		/*
+ 		 * We currently don't do anything fancy with DMA
+@@ -2387,18 +2538,8 @@
+ 			sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
+ 		}
+ 
+-		if (intmask & SDHCI_INT_DATA_END) {
+-			if (host->cmd) {
+-				/*
+-				 * Data managed to finish before the
+-				 * command completed. Make sure we do
+-				 * things in the proper order.
+-				 */
+-				host->data_early = 1;
+-			} else {
+-				sdhci_finish_data(host);
+-			}
+-		}
++		if (intmask & SDHCI_INT_DATA_END)
++			sdhci_data_end(host);
+ 	}
+ }
+ 
+@@ -2409,10 +2550,10 @@
+ 	u32 intmask, unexpected = 0;
+ 	int cardint = 0, max_loops = 16;
+ 
+-	spin_lock(&host->lock);
++	sdhci_spin_lock(host);
+ 
+ 	if (host->runtime_suspended) {
+-		spin_unlock(&host->lock);
++		sdhci_spin_unlock(host);
+ 		pr_warning("%s: got irq while runtime suspended\n",
+ 		       mmc_hostname(host->mmc));
+ 		return IRQ_HANDLED;
+@@ -2454,6 +2595,22 @@
+ 		tasklet_schedule(&host->card_tasklet);
+ 	}
+ 
++	if (intmask & SDHCI_INT_ERROR_MASK & ~SDHCI_INT_ERROR)
++		DBG("controller reports error 0x%x -"
++				"%s%s%s%s%s%s%s%s%s%s",
++				intmask,
++				intmask & SDHCI_INT_TIMEOUT? " timeout": "",
++				intmask & SDHCI_INT_CRC     ? " crc": "",
++				intmask & SDHCI_INT_END_BIT? " endbit": "",
++				intmask & SDHCI_INT_INDEX? " index": "",
++				intmask & SDHCI_INT_DATA_TIMEOUT? " data_timeout": "",
++				intmask & SDHCI_INT_DATA_CRC? " data_crc": "",
++				intmask & SDHCI_INT_DATA_END_BIT? " data_endbit": "",
++				intmask & SDHCI_INT_BUS_POWER? " buspower": "",
++				intmask & SDHCI_INT_ACMD12ERR? " acmd12": "",
++				intmask & SDHCI_INT_ADMA_ERROR? " adma": ""
++		   );
++
+ 	if (intmask & SDHCI_INT_CMD_MASK) {
+ 		sdhci_writel(host, intmask & SDHCI_INT_CMD_MASK,
+ 			SDHCI_INT_STATUS);
+@@ -2468,7 +2625,13 @@
+ 
+ 	intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK);
+ 
+-	intmask &= ~SDHCI_INT_ERROR;
++	if (intmask & SDHCI_INT_ERROR_MASK) {
++		/* collect any uncovered errors */
++		sdhci_writel(host, intmask & SDHCI_INT_ERROR_MASK,
++				SDHCI_INT_STATUS);
++	}
++
++	intmask &= ~SDHCI_INT_ERROR_MASK;
+ 
+ 	if (intmask & SDHCI_INT_BUS_POWER) {
+ 		pr_err("%s: Card is consuming too much power!\n",
+@@ -2494,7 +2657,7 @@
+ 	if (intmask && --max_loops)
+ 		goto again;
+ out:
+-	spin_unlock(&host->lock);
++	sdhci_spin_unlock(host);
+ 
+ 	if (unexpected) {
+ 		pr_err("%s: Unexpected interrupt 0x%08x.\n",
+@@ -2588,13 +2751,14 @@
+ {
+ 	int ret;
+ 
+-	if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
++	if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA |
++			   SDHCI_USE_PLATDMA)) {
+ 		if (host->ops->enable_dma)
+ 			host->ops->enable_dma(host);
+ 	}
+ 
+ 	if (!device_may_wakeup(mmc_dev(host->mmc))) {
+-		ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
++		ret = request_irq(host->irq, sdhci_irq, 0 /*IRQF_SHARED*/,
+ 				  mmc_hostname(host->mmc), host);
+ 		if (ret)
+ 			return ret;
+@@ -2671,15 +2835,15 @@
+ 		host->flags &= ~SDHCI_NEEDS_RETUNING;
+ 	}
+ 
+-	spin_lock_irqsave(&host->lock, flags);
++	sdhci_spin_lock_irqsave(host, &flags);
+ 	sdhci_mask_irqs(host, SDHCI_INT_ALL_MASK);
+-	spin_unlock_irqrestore(&host->lock, flags);
++	sdhci_spin_unlock_irqrestore(host, flags);
+ 
+ 	synchronize_irq(host->irq);
+ 
+-	spin_lock_irqsave(&host->lock, flags);
++	sdhci_spin_lock_irqsave(host, &flags);
+ 	host->runtime_suspended = true;
+-	spin_unlock_irqrestore(&host->lock, flags);
++	sdhci_spin_unlock_irqrestore(host, flags);
+ 
+ 	return ret;
+ }
+@@ -2705,16 +2869,16 @@
+ 	sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios);
+ 	if ((host_flags & SDHCI_PV_ENABLED) &&
+ 		!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) {
+-		spin_lock_irqsave(&host->lock, flags);
++		sdhci_spin_lock_irqsave(host, &flags);
+ 		sdhci_enable_preset_value(host, true);
+-		spin_unlock_irqrestore(&host->lock, flags);
++		sdhci_spin_unlock_irqrestore(host, flags);
+ 	}
+ 
+ 	/* Set the re-tuning expiration flag */
+ 	if (host->flags & SDHCI_USING_RETUNING_TIMER)
+ 		host->flags |= SDHCI_NEEDS_RETUNING;
+ 
+-	spin_lock_irqsave(&host->lock, flags);
++	sdhci_spin_lock_irqsave(host, &flags);
+ 
+ 	host->runtime_suspended = false;
+ 
+@@ -2725,7 +2889,7 @@
+ 	/* Enable Card Detection */
+ 	sdhci_enable_card_detection(host);
+ 
+-	spin_unlock_irqrestore(&host->lock, flags);
++	sdhci_spin_unlock_irqrestore(host, flags);
+ 
+ 	return ret;
+ }
+@@ -2820,14 +2984,16 @@
+ 		host->flags &= ~SDHCI_USE_ADMA;
+ 	}
+ 
+-	if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
++	if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA |
++			   SDHCI_USE_PLATDMA)) {
+ 		if (host->ops->enable_dma) {
+ 			if (host->ops->enable_dma(host)) {
+ 				pr_warning("%s: No suitable DMA "
+ 					"available. Falling back to PIO.\n",
+ 					mmc_hostname(mmc));
+ 				host->flags &=
+-					~(SDHCI_USE_SDMA | SDHCI_USE_ADMA);
++					~(SDHCI_USE_SDMA | SDHCI_USE_ADMA |
++					  SDHCI_USE_PLATDMA);
+ 			}
+ 		}
+ 	}
+@@ -3218,8 +3384,8 @@
+ 
+ 	sdhci_init(host, 0);
+ 
+-	ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
+-		mmc_hostname(mmc), host);
++	ret = request_irq(host->irq, sdhci_irq, 0 /*IRQF_SHARED*/,
++                mmc_hostname(mmc), host);
+ 	if (ret) {
+ 		pr_err("%s: Failed to request IRQ %d: %d\n",
+ 		       mmc_hostname(mmc), host->irq, ret);
+@@ -3252,6 +3418,7 @@
+ 
+ 	pr_info("%s: SDHCI controller on %s [%s] using %s\n",
+ 		mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
++		(host->flags & SDHCI_USE_PLATDMA) ? "platform's DMA" :
+ 		(host->flags & SDHCI_USE_ADMA) ? "ADMA" :
+ 		(host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO");
+ 
+@@ -3279,7 +3446,7 @@
+ 	unsigned long flags;
+ 
+ 	if (dead) {
+-		spin_lock_irqsave(&host->lock, flags);
++		sdhci_spin_lock_irqsave(host, &flags);
+ 
+ 		host->flags |= SDHCI_DEVICE_DEAD;
+ 
+@@ -3291,7 +3458,7 @@
+ 			tasklet_schedule(&host->finish_tasklet);
+ 		}
+ 
+-		spin_unlock_irqrestore(&host->lock, flags);
++		sdhci_spin_unlock_irqrestore(host, flags);
+ 	}
+ 
+ 	sdhci_disable_card_detection(host);
+diff -Nur linux-3.12.6/drivers/mmc/host/sdhci.h linux-raspberry-pi/drivers/mmc/host/sdhci.h
+--- linux-3.12.6/drivers/mmc/host/sdhci.h	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/mmc/host/sdhci.h	2013-12-29 10:40:59.000000000 +0100
+@@ -289,6 +289,18 @@
+ 	void	(*platform_reset_enter)(struct sdhci_host *host, u8 mask);
+ 	void	(*platform_reset_exit)(struct sdhci_host *host, u8 mask);
+ 	int	(*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs);
++
++	int             (*pdma_able)(struct sdhci_host *host,
++				     struct mmc_data *data);
++	void            (*pdma_avail)(struct sdhci_host *host,
++				      unsigned int *ref_intmask,
++				      void(*complete)(struct sdhci_host *));
++	void            (*pdma_reset)(struct sdhci_host *host,
++				      struct mmc_data *data);
++	unsigned int 	(*extra_ints)(struct sdhci_host *host);
++	unsigned int	(*spurious_crc_acmd51)(struct sdhci_host *host);
++	unsigned int	(*missing_status)(struct sdhci_host *host);
++
+ 	void	(*hw_reset)(struct sdhci_host *host);
+ 	void	(*platform_suspend)(struct sdhci_host *host);
+ 	void	(*platform_resume)(struct sdhci_host *host);
+@@ -400,9 +412,38 @@
+ extern void sdhci_enable_irq_wakeups(struct sdhci_host *host);
+ #endif
+ 
++static inline int /*bool*/
++sdhci_platdma_dmaable(struct sdhci_host *host, struct mmc_data *data)
++{
++	if (host->ops->pdma_able)
++		return host->ops->pdma_able(host, data);
++	else
++		return 1;
++}
++static inline void
++sdhci_platdma_avail(struct sdhci_host *host, unsigned int *ref_intmask,
++		void(*completion_callback)(struct sdhci_host *))
++{
++	if (host->ops->pdma_avail)
++		host->ops->pdma_avail(host, ref_intmask, completion_callback);
++}
++
++static inline void
++sdhci_platdma_reset(struct sdhci_host *host, struct mmc_data *data)
++{
++	if (host->ops->pdma_reset)
++		host->ops->pdma_reset(host, data);
++}
++
+ #ifdef CONFIG_PM_RUNTIME
+ extern int sdhci_runtime_suspend_host(struct sdhci_host *host);
+ extern int sdhci_runtime_resume_host(struct sdhci_host *host);
+ #endif
+ 
++extern void sdhci_spin_lock_irqsave(struct sdhci_host *host,unsigned long *flags);
++extern void sdhci_spin_unlock_irqrestore(struct sdhci_host *host,unsigned long flags);
++extern void sdhci_spin_lock(struct sdhci_host *host);
++extern void sdhci_spin_unlock(struct sdhci_host *host);
++
++
+ #endif /* __SDHCI_HW_H */
+diff -Nur linux-3.12.6/drivers/net/usb/smsc95xx.c linux-raspberry-pi/drivers/net/usb/smsc95xx.c
+--- linux-3.12.6/drivers/net/usb/smsc95xx.c	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/net/usb/smsc95xx.c	2013-12-29 10:41:09.000000000 +0100
+@@ -61,6 +61,7 @@
+ #define SUSPEND_SUSPEND3		(0x08)
+ #define SUSPEND_ALLMODES		(SUSPEND_SUSPEND0 | SUSPEND_SUSPEND1 | \
+ 					 SUSPEND_SUSPEND2 | SUSPEND_SUSPEND3)
++#define MAC_ADDR_LEN                    (6)
+ 
+ struct smsc95xx_priv {
+ 	u32 mac_cr;
+@@ -76,6 +77,10 @@
+ module_param(turbo_mode, bool, 0644);
+ MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction");
+ 
++static char *macaddr = ":";
++module_param(macaddr, charp, 0);
++MODULE_PARM_DESC(macaddr, "MAC address");
++
+ static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index,
+ 					    u32 *data, int in_pm)
+ {
+@@ -765,8 +770,59 @@
+ 	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+ }
+ 
++/* Check the macaddr module parameter for a MAC address */
++static int smsc95xx_is_macaddr_param(struct usbnet *dev, u8 *dev_mac)
++{
++       int i, j, got_num, num;
++       u8 mtbl[MAC_ADDR_LEN];
++
++       if (macaddr[0] == ':')
++               return 0;
++
++       i = 0;
++       j = 0;
++       num = 0;
++       got_num = 0;
++       while (j < MAC_ADDR_LEN) {
++               if (macaddr[i] && macaddr[i] != ':') {
++                       got_num++;
++                       if ('0' <= macaddr[i] && macaddr[i] <= '9')
++                               num = num * 16 + macaddr[i] - '0';
++                       else if ('A' <= macaddr[i] && macaddr[i] <= 'F')
++                               num = num * 16 + 10 + macaddr[i] - 'A';
++                       else if ('a' <= macaddr[i] && macaddr[i] <= 'f')
++                               num = num * 16 + 10 + macaddr[i] - 'a';
++                       else
++                               break;
++                       i++;
++               } else if (got_num == 2) {
++                       mtbl[j++] = (u8) num;
++                       num = 0;
++                       got_num = 0;
++                       i++;
++               } else {
++                       break;
++               }
++       }
++
++       if (j == MAC_ADDR_LEN) {
++               netif_dbg(dev, ifup, dev->net, "Overriding MAC address with: "
++               "%02x:%02x:%02x:%02x:%02x:%02x\n", mtbl[0], mtbl[1], mtbl[2],
++                                               mtbl[3], mtbl[4], mtbl[5]);
++               for (i = 0; i < MAC_ADDR_LEN; i++)
++                       dev_mac[i] = mtbl[i];
++               return 1;
++       } else {
++               return 0;
++       }
++}
++
+ static void smsc95xx_init_mac_address(struct usbnet *dev)
+ {
++       /* Check module parameters */
++       if (smsc95xx_is_macaddr_param(dev, dev->net->dev_addr))
++               return;
++
+ 	/* try reading mac address from EEPROM */
+ 	if (smsc95xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
+ 			dev->net->dev_addr) == 0) {
+diff -Nur linux-3.12.6/drivers/net/wireless/Kconfig linux-raspberry-pi/drivers/net/wireless/Kconfig
+--- linux-3.12.6/drivers/net/wireless/Kconfig	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/Kconfig	2013-12-29 10:41:14.000000000 +0100
+@@ -276,7 +276,8 @@
+ source "drivers/net/wireless/orinoco/Kconfig"
+ source "drivers/net/wireless/p54/Kconfig"
+ source "drivers/net/wireless/rt2x00/Kconfig"
+-source "drivers/net/wireless/rtlwifi/Kconfig"
++#source "drivers/net/wireless/rtlwifi/Kconfig"
++source "drivers/net/wireless/rtl8192cu/Kconfig"
+ source "drivers/net/wireless/ti/Kconfig"
+ source "drivers/net/wireless/zd1211rw/Kconfig"
+ source "drivers/net/wireless/mwifiex/Kconfig"
+diff -Nur linux-3.12.6/drivers/net/wireless/Makefile linux-raspberry-pi/drivers/net/wireless/Makefile
+--- linux-3.12.6/drivers/net/wireless/Makefile	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/Makefile	2013-12-29 10:41:14.000000000 +0100
+@@ -24,7 +24,8 @@
+ obj-$(CONFIG_ZD1211RW)		+= zd1211rw/
+ obj-$(CONFIG_RTL8180)		+= rtl818x/
+ obj-$(CONFIG_RTL8187)		+= rtl818x/
+-obj-$(CONFIG_RTLWIFI)		+= rtlwifi/
++#obj-$(CONFIG_RTLWIFI)		+= rtlwifi/
++obj-$(CONFIG_RTL8192CU)		+= rtl8192cu/
+ 
+ # 16-bit wireless PCMCIA client drivers
+ obj-$(CONFIG_PCMCIA_RAYCS)	+= ray_cs.o
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/clean linux-raspberry-pi/drivers/net/wireless/rtl8192cu/clean
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/clean	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/clean	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,5 @@
++#!/bin/bash
++rmmod 8192cu
++rmmod 8192ce
++rmmod 8192du
++rmmod 8192de
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/core/efuse/rtw_efuse.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/efuse/rtw_efuse.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/core/efuse/rtw_efuse.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/efuse/rtw_efuse.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,1147 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _RTW_EFUSE_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++
++#include <rtw_efuse.h>
++
++
++
++/*------------------------Define local variable------------------------------*/
++u8	fakeEfuseBank=0;
++u32	fakeEfuseUsedBytes=0;
++u8	fakeEfuseContent[EFUSE_MAX_HW_SIZE]={0};
++u8	fakeEfuseInitMap[EFUSE_MAX_MAP_LEN]={0};
++u8	fakeEfuseModifiedMap[EFUSE_MAX_MAP_LEN]={0};
++
++u32	BTEfuseUsedBytes=0;
++u8	BTEfuseContent[EFUSE_MAX_BT_BANK][EFUSE_MAX_HW_SIZE];
++u8	BTEfuseInitMap[EFUSE_BT_MAX_MAP_LEN]={0};
++u8	BTEfuseModifiedMap[EFUSE_BT_MAX_MAP_LEN]={0};
++
++u32	fakeBTEfuseUsedBytes=0;
++u8	fakeBTEfuseContent[EFUSE_MAX_BT_BANK][EFUSE_MAX_HW_SIZE];
++u8	fakeBTEfuseInitMap[EFUSE_BT_MAX_MAP_LEN]={0};
++u8	fakeBTEfuseModifiedMap[EFUSE_BT_MAX_MAP_LEN]={0};
++/*------------------------Define local variable------------------------------*/
++
++//------------------------------------------------------------------------------
++#define REG_EFUSE_CTRL		0x0030
++#define EFUSE_CTRL			REG_EFUSE_CTRL		// E-Fuse Control.
++//------------------------------------------------------------------------------
++
++BOOLEAN
++Efuse_Read1ByteFromFakeContent(
++	IN		PADAPTER	pAdapter,
++	IN		u16		Offset,
++	IN OUT	u8		*Value	);
++BOOLEAN
++Efuse_Read1ByteFromFakeContent(
++	IN		PADAPTER	pAdapter,
++	IN		u16		Offset,
++	IN OUT	u8		*Value	)
++{
++	if(Offset >= EFUSE_MAX_HW_SIZE)
++	{
++		return _FALSE;
++	}
++	//DbgPrint("Read fake content, offset = %d\n", Offset);
++	if(fakeEfuseBank == 0)
++		*Value = fakeEfuseContent[Offset];
++	else
++		*Value = fakeBTEfuseContent[fakeEfuseBank-1][Offset];
++	return _TRUE;
++}
++
++BOOLEAN
++Efuse_Write1ByteToFakeContent(
++	IN		PADAPTER	pAdapter,
++	IN		u16		Offset,
++	IN 		u8		Value	);
++BOOLEAN
++Efuse_Write1ByteToFakeContent(
++	IN		PADAPTER	pAdapter,
++	IN		u16		Offset,
++	IN 		u8		Value	)
++{
++	if(Offset >= EFUSE_MAX_HW_SIZE)
++	{
++		return _FALSE;
++	}
++	if(fakeEfuseBank == 0)
++		fakeEfuseContent[Offset] = Value;
++	else
++	{
++		fakeBTEfuseContent[fakeEfuseBank-1][Offset] = Value;
++	}
++	return _TRUE;
++}
++
++/*-----------------------------------------------------------------------------
++ * Function:	Efuse_PowerSwitch
++ *
++ * Overview:	When we want to enable write operation, we should change to 
++ *				pwr on state. When we stop write, we should switch to 500k mode
++ *				and disable LDO 2.5V.
++ *
++ * Input:       NONE
++ *
++ * Output:      NONE
++ *
++ * Return:      NONE
++ *
++ * Revised History:
++ * When			Who		Remark
++ * 11/17/2008 	MHC		Create Version 0.
++ *
++ *---------------------------------------------------------------------------*/
++VOID
++Efuse_PowerSwitch(
++	IN	PADAPTER	pAdapter,
++	IN	u8		bWrite,
++	IN	u8		PwrState)
++{
++	pAdapter->HalFunc.EfusePowerSwitch(pAdapter, bWrite, PwrState);
++}	
++
++/*-----------------------------------------------------------------------------
++ * Function:	efuse_GetCurrentSize
++ *
++ * Overview:	Get current efuse size!!!
++ *
++ * Input:       NONE
++ *
++ * Output:      NONE
++ *
++ * Return:      NONE
++ *
++ * Revised History:
++ * When			Who		Remark
++ * 11/16/2008 	MHC		Create Version 0.
++ *
++ *---------------------------------------------------------------------------*/
++u16
++Efuse_GetCurrentSize(
++	IN PADAPTER		pAdapter,
++	IN u8			efuseType,
++	IN BOOLEAN		bPseudoTest)
++{
++	u16 ret=0;
++
++	ret = pAdapter->HalFunc.EfuseGetCurrentSize(pAdapter, efuseType, bPseudoTest);
++
++	return ret;
++}
++
++/*  11/16/2008 MH Add description. Get current efuse area enabled word!!. */
++u8
++Efuse_CalculateWordCnts(IN u8	word_en)
++{
++	u8 word_cnts = 0;
++	if(!(word_en & BIT(0)))	word_cnts++; // 0 : write enable
++	if(!(word_en & BIT(1)))	word_cnts++;
++	if(!(word_en & BIT(2)))	word_cnts++;
++	if(!(word_en & BIT(3)))	word_cnts++;
++	return word_cnts;
++}
++
++//
++//	Description:
++//		Execute E-Fuse read byte operation.
++//		Refered from SD1 Richard.
++//
++//	Assumption:
++//		1. Boot from E-Fuse and successfully auto-load.
++//		2. PASSIVE_LEVEL (USB interface)
++//
++//	Created by Roger, 2008.10.21.
++//
++VOID
++ReadEFuseByte(
++		PADAPTER	Adapter,
++		u16 			_offset, 
++		u8 			*pbuf, 
++		IN BOOLEAN	bPseudoTest) 
++{
++	u32	value32;
++	u8	readbyte;
++	u16	retry;
++	//u32 start=rtw_get_current_time();
++
++	if(bPseudoTest)
++	{
++		Efuse_Read1ByteFromFakeContent(Adapter, _offset, pbuf);
++		return;
++	}
++
++	//Write Address
++	rtw_write8(Adapter, EFUSE_CTRL+1, (_offset & 0xff));  		
++	readbyte = rtw_read8(Adapter, EFUSE_CTRL+2);
++	rtw_write8(Adapter, EFUSE_CTRL+2, ((_offset >> 8) & 0x03) | (readbyte & 0xfc));  		
++
++	//Write bit 32 0
++	readbyte = rtw_read8(Adapter, EFUSE_CTRL+3);		
++	rtw_write8(Adapter, EFUSE_CTRL+3, (readbyte & 0x7f));  	
++	
++	//Check bit 32 read-ready
++	retry = 0;
++	value32 = rtw_read32(Adapter, EFUSE_CTRL);
++	//while(!(((value32 >> 24) & 0xff) & 0x80)  && (retry<10))
++	while(!(((value32 >> 24) & 0xff) & 0x80)  && (retry<10000))
++	{
++		value32 = rtw_read32(Adapter, EFUSE_CTRL);
++		retry++;
++	}
++
++	// 20100205 Joseph: Add delay suggested by SD1 Victor.
++	// This fix the problem that Efuse read error in high temperature condition.
++	// Designer says that there shall be some delay after ready bit is set, or the
++	// result will always stay on last data we read.
++	rtw_udelay_os(50);
++	value32 = rtw_read32(Adapter, EFUSE_CTRL);
++	
++	*pbuf = (u8)(value32 & 0xff);
++	//DBG_871X("ReadEFuseByte _offset:%08u, in %d ms\n",_offset ,rtw_get_passing_time_ms(start));
++	
++}
++
++
++//
++//	Description:
++//		1. Execute E-Fuse read byte operation according as map offset and 
++//		    save to E-Fuse table.
++//		2. Refered from SD1 Richard.
++//
++//	Assumption:
++//		1. Boot from E-Fuse and successfully auto-load.
++//		2. PASSIVE_LEVEL (USB interface)
++//
++//	Created by Roger, 2008.10.21.
++//
++//	2008/12/12 MH 	1. Reorganize code flow and reserve bytes. and add description.
++//					2. Add efuse utilization collect.
++//	2008/12/22 MH	Read Efuse must check if we write section 1 data again!!! Sec1
++//					write addr must be after sec5.
++//
++
++VOID
++efuse_ReadEFuse(
++	PADAPTER	Adapter,
++	u8		efuseType,
++	u16		_offset,
++	u16 		_size_byte,
++	u8      	*pbuf,
++	IN	BOOLEAN	bPseudoTest
++	);
++VOID
++efuse_ReadEFuse(
++	PADAPTER	Adapter,
++	u8		efuseType,
++	u16		_offset,
++	u16 		_size_byte,
++	u8      	*pbuf,
++	IN	BOOLEAN	bPseudoTest
++	)
++{
++	Adapter->HalFunc.ReadEFuse(Adapter, efuseType, _offset, _size_byte, pbuf, bPseudoTest);
++}
++
++VOID
++EFUSE_GetEfuseDefinition(
++	IN		PADAPTER	pAdapter,
++	IN		u8		efuseType,
++	IN		u8		type,
++	OUT		void		*pOut,
++	IN		BOOLEAN		bPseudoTest
++	)
++{
++	pAdapter->HalFunc.EFUSEGetEfuseDefinition(pAdapter, efuseType, type, pOut, bPseudoTest);
++}
++
++/*-----------------------------------------------------------------------------
++ * Function:	EFUSE_Read1Byte
++ *
++ * Overview:	Copy from WMAC fot EFUSE read 1 byte.
++ *
++ * Input:       NONE
++ *
++ * Output:      NONE
++ *
++ * Return:      NONE
++ *
++ * Revised History:
++ * When			Who		Remark
++ * 09/23/2008 	MHC		Copy from WMAC.
++ *
++ *---------------------------------------------------------------------------*/
++u8
++EFUSE_Read1Byte(	
++	IN	PADAPTER	Adapter, 
++	IN	u16		Address)
++{
++	u8	data;
++	u8	Bytetemp = {0x00};
++	u8	temp = {0x00};
++	u32	k=0;
++	u16	contentLen=0;
++
++	EFUSE_GetEfuseDefinition(Adapter, EFUSE_WIFI , TYPE_EFUSE_REAL_CONTENT_LEN, (PVOID)&contentLen, _FALSE);
++
++	if (Address < contentLen)	//E-fuse 512Byte
++	{
++		//Write E-fuse Register address bit0~7
++		temp = Address & 0xFF;	
++		rtw_write8(Adapter, EFUSE_CTRL+1, temp);	
++		Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+2);	
++		//Write E-fuse Register address bit8~9
++		temp = ((Address >> 8) & 0x03) | (Bytetemp & 0xFC);	
++		rtw_write8(Adapter, EFUSE_CTRL+2, temp);	
++
++		//Write 0x30[31]=0
++		Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+3);
++		temp = Bytetemp & 0x7F;
++		rtw_write8(Adapter, EFUSE_CTRL+3, temp);
++
++		//Wait Write-ready (0x30[31]=1)
++		Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+3);
++		while(!(Bytetemp & 0x80))
++		{				
++			Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+3);
++			k++;
++			if(k==1000)
++			{
++				k=0;
++				break;
++			}
++		}
++		data=rtw_read8(Adapter, EFUSE_CTRL);
++		return data;
++	}
++	else
++		return 0xFF;
++	
++}/* EFUSE_Read1Byte */
++
++/*-----------------------------------------------------------------------------
++ * Function:	EFUSE_Write1Byte
++ *
++ * Overview:	Copy from WMAC fot EFUSE write 1 byte.
++ *
++ * Input:       NONE
++ *
++ * Output:      NONE
++ *
++ * Return:      NONE
++ *
++ * Revised History:
++ * When			Who		Remark
++ * 09/23/2008 	MHC		Copy from WMAC.
++ *
++ *---------------------------------------------------------------------------*/
++
++void	
++EFUSE_Write1Byte(	
++	IN	PADAPTER	Adapter, 
++	IN	u16		Address,
++	IN	u8		Value);
++void	
++EFUSE_Write1Byte(	
++	IN	PADAPTER	Adapter, 
++	IN	u16		Address,
++	IN	u8		Value)
++{
++	u8	Bytetemp = {0x00};
++	u8	temp = {0x00};
++	u32	k=0;
++	u16	contentLen=0;
++
++	//RT_TRACE(COMP_EFUSE, DBG_LOUD, ("Addr=%x Data =%x\n", Address, Value));
++	EFUSE_GetEfuseDefinition(Adapter, EFUSE_WIFI , TYPE_EFUSE_REAL_CONTENT_LEN, (PVOID)&contentLen, _FALSE);
++
++	if( Address < contentLen)	//E-fuse 512Byte
++	{
++		rtw_write8(Adapter, EFUSE_CTRL, Value);
++
++		//Write E-fuse Register address bit0~7
++		temp = Address & 0xFF;	
++		rtw_write8(Adapter, EFUSE_CTRL+1, temp);	
++		Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+2);	
++		
++		//Write E-fuse Register address bit8~9
++		temp = ((Address >> 8) & 0x03) | (Bytetemp & 0xFC);	
++		rtw_write8(Adapter, EFUSE_CTRL+2, temp);	
++
++		//Write 0x30[31]=1
++		Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+3);
++		temp = Bytetemp | 0x80;
++		rtw_write8(Adapter, EFUSE_CTRL+3, temp);
++
++		//Wait Write-ready (0x30[31]=0)
++		Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+3);
++		while(Bytetemp & 0x80)
++		{
++			Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+3);			
++			k++;
++			if(k==100)
++			{
++				k=0;
++				break;
++			}
++		}
++	}
++}/* EFUSE_Write1Byte */
++
++/*  11/16/2008 MH Read one byte from real Efuse. */
++u8
++efuse_OneByteRead(
++	IN	PADAPTER	pAdapter, 
++	IN	u16			addr,
++	IN	u8			*data,
++	IN	BOOLEAN		bPseudoTest)
++{
++	u8	tmpidx = 0;
++	u8	bResult;
++
++	if(bPseudoTest)
++	{
++		bResult = Efuse_Read1ByteFromFakeContent(pAdapter, addr, data);
++		return bResult;
++	}
++	// -----------------e-fuse reg ctrl ---------------------------------
++	//address			
++	rtw_write8(pAdapter, EFUSE_CTRL+1, (u8)(addr&0xff));		
++	rtw_write8(pAdapter, EFUSE_CTRL+2, ((u8)((addr>>8) &0x03) ) | 
++	(rtw_read8(pAdapter, EFUSE_CTRL+2)&0xFC ));	
++
++	rtw_write8(pAdapter, EFUSE_CTRL+3,  0x72);//read cmd	
++
++	while(!(0x80 &rtw_read8(pAdapter, EFUSE_CTRL+3))&&(tmpidx<100))
++	{
++		tmpidx++;
++	}
++	if(tmpidx<100)
++	{			
++		*data=rtw_read8(pAdapter, EFUSE_CTRL);		
++		bResult = _TRUE;
++	}
++	else
++	{
++		*data = 0xff;	
++		bResult = _FALSE;
++	}
++	return bResult;
++}
++		
++/*  11/16/2008 MH Write one byte to reald Efuse. */
++u8
++efuse_OneByteWrite(
++	IN	PADAPTER	pAdapter,  
++	IN	u16			addr, 
++	IN	u8			data,
++	IN	BOOLEAN		bPseudoTest)
++{
++	u8	tmpidx = 0;
++	u8	bResult;
++
++	if(bPseudoTest)
++	{
++		bResult = Efuse_Write1ByteToFakeContent(pAdapter, addr, data);
++		return bResult;
++	}
++	//RT_TRACE(COMP_EFUSE, DBG_LOUD, ("Addr = %x Data=%x\n", addr, data));
++
++	//return	0;
++
++	// -----------------e-fuse reg ctrl ---------------------------------	
++	//address			
++	rtw_write8(pAdapter, EFUSE_CTRL+1, (u8)(addr&0xff));
++	rtw_write8(pAdapter, EFUSE_CTRL+2, 
++	(rtw_read8(pAdapter, EFUSE_CTRL+2)&0xFC )|(u8)((addr>>8)&0x03) );	
++	rtw_write8(pAdapter, EFUSE_CTRL, data);//data		
++
++	rtw_write8(pAdapter, EFUSE_CTRL+3, 0xF2);//write cmd
++		
++	while((0x80 &  rtw_read8(pAdapter, EFUSE_CTRL+3)) && (tmpidx<100) ){
++		tmpidx++;
++	}
++	
++	if(tmpidx<100)
++	{					
++		bResult = _TRUE;
++	}
++	else
++	{			
++		bResult = _FALSE;
++	}		
++	
++	return bResult;	
++}
++
++int
++Efuse_PgPacketRead(	IN	PADAPTER	pAdapter,
++					IN	u8			offset,
++					IN	u8			*data,
++					IN	BOOLEAN		bPseudoTest)
++{
++	int	ret=0;
++
++	ret =  pAdapter->HalFunc.Efuse_PgPacketRead(pAdapter, offset, data, bPseudoTest);
++
++	return ret;
++}
++
++int 
++Efuse_PgPacketWrite(IN	PADAPTER	pAdapter, 
++					IN	u8 			offset,
++					IN	u8			word_en,
++					IN	u8			*data,
++					IN	BOOLEAN		bPseudoTest)
++{
++	int ret;
++
++	ret =  pAdapter->HalFunc.Efuse_PgPacketWrite(pAdapter, offset, word_en, data, bPseudoTest);
++
++	return ret;
++}
++
++/*-----------------------------------------------------------------------------
++ * Function:	efuse_WordEnableDataRead
++ *
++ * Overview:	Read allowed word in current efuse section data.
++ *
++ * Input:       NONE
++ *
++ * Output:      NONE
++ *
++ * Return:      NONE
++ *
++ * Revised History:
++ * When			Who		Remark
++ * 11/16/2008 	MHC		Create Version 0.
++ * 11/21/2008 	MHC		Fix Write bug when we only enable late word.
++ *
++ *---------------------------------------------------------------------------*/
++void
++efuse_WordEnableDataRead(IN	u8	word_en,
++							IN	u8	*sourdata,
++							IN	u8	*targetdata)
++{	
++	if (!(word_en&BIT(0)))
++	{
++		targetdata[0] = sourdata[0];
++		targetdata[1] = sourdata[1];
++	}
++	if (!(word_en&BIT(1)))
++	{
++		targetdata[2] = sourdata[2];
++		targetdata[3] = sourdata[3];
++	}
++	if (!(word_en&BIT(2)))
++	{
++		targetdata[4] = sourdata[4];
++		targetdata[5] = sourdata[5];
++	}
++	if (!(word_en&BIT(3)))
++	{
++		targetdata[6] = sourdata[6];
++		targetdata[7] = sourdata[7];
++	}
++}
++
++
++u8
++Efuse_WordEnableDataWrite(	IN	PADAPTER	pAdapter,
++							IN	u16		efuse_addr,
++							IN	u8		word_en, 
++							IN	u8		*data,
++							IN	BOOLEAN		bPseudoTest)
++{
++	u8	ret=0;
++
++	ret =  pAdapter->HalFunc.Efuse_WordEnableDataWrite(pAdapter, efuse_addr, word_en, data, bPseudoTest);
++	
++	return ret;
++}
++
++static u8 efuse_read8(PADAPTER padapter, u16 address, u8 *value)
++{
++	return efuse_OneByteRead(padapter,address, value, _FALSE);
++}
++
++static u8 efuse_write8(PADAPTER padapter, u16 address, u8 *value)
++{
++	return efuse_OneByteWrite(padapter,address, *value, _FALSE);
++}
++
++/*
++ * read/wirte raw efuse data
++ */
++u8 rtw_efuse_access(PADAPTER padapter, u8 bWrite, u16 start_addr, u16 cnts, u8 *data)
++{
++	int i = 0;
++	u16	real_content_len = 0, max_available_size = 0;
++	u8 res = _FAIL ;
++	u8 (*rw8)(PADAPTER, u16, u8*);
++
++	EFUSE_GetEfuseDefinition(padapter, EFUSE_WIFI, TYPE_EFUSE_REAL_CONTENT_LEN, (PVOID)&real_content_len, _FALSE);
++	EFUSE_GetEfuseDefinition(padapter, EFUSE_WIFI, TYPE_AVAILABLE_EFUSE_BYTES_TOTAL, (PVOID)&max_available_size, _FALSE);
++
++	if (start_addr > real_content_len)
++		return _FAIL;
++
++	if (_TRUE == bWrite) {
++		if ((start_addr + cnts) > max_available_size)
++			return _FAIL;
++		rw8 = &efuse_write8;
++	} else
++		rw8 = &efuse_read8;
++
++	Efuse_PowerSwitch(padapter, bWrite, _TRUE);
++
++	// e-fuse one byte read / write
++	for (i = 0; i < cnts; i++) {
++		if (start_addr >= real_content_len) {
++			res = _FAIL;
++			break;
++		}
++
++		res = rw8(padapter, start_addr++, data++);
++		if (_FAIL == res) break;
++	}
++
++	Efuse_PowerSwitch(padapter, bWrite, _FALSE);
++
++	return res;
++}
++//------------------------------------------------------------------------------
++u16 efuse_GetMaxSize(PADAPTER padapter)
++{
++	u16	max_size;
++	EFUSE_GetEfuseDefinition(padapter, EFUSE_WIFI , TYPE_AVAILABLE_EFUSE_BYTES_TOTAL, (PVOID)&max_size, _FALSE);
++	return max_size;
++}
++//------------------------------------------------------------------------------
++u8 efuse_GetCurrentSize(PADAPTER padapter, u16 *size)
++{
++	Efuse_PowerSwitch(padapter, _FALSE, _TRUE);
++	*size = Efuse_GetCurrentSize(padapter, EFUSE_WIFI, _FALSE);
++	Efuse_PowerSwitch(padapter, _FALSE, _FALSE);
++
++	return _SUCCESS;
++}
++//------------------------------------------------------------------------------
++u8 rtw_efuse_map_read(PADAPTER padapter, u16 addr, u16 cnts, u8 *data)
++{
++	u16	mapLen=0;
++
++	EFUSE_GetEfuseDefinition(padapter, EFUSE_WIFI, TYPE_EFUSE_MAP_LEN, (PVOID)&mapLen, _FALSE);
++
++	if ((addr + cnts) > mapLen)
++		return _FAIL;
++
++	Efuse_PowerSwitch(padapter, _FALSE, _TRUE);
++
++	efuse_ReadEFuse(padapter, EFUSE_WIFI, addr, cnts, data, _FALSE);
++
++	Efuse_PowerSwitch(padapter, _FALSE, _FALSE);
++
++	return _SUCCESS;
++}
++//------------------------------------------------------------------------------
++u8 rtw_efuse_map_write(PADAPTER padapter, u16 addr, u16 cnts, u8 *data)
++{
++	u8	offset, word_en;
++	u8	*map;
++	u8	newdata[PGPKT_DATA_SIZE];
++	s32	i, j, idx;
++	u8	ret = _SUCCESS;
++	u16	mapLen=0;
++
++	EFUSE_GetEfuseDefinition(padapter, EFUSE_WIFI, TYPE_EFUSE_MAP_LEN, (PVOID)&mapLen, _FALSE);
++
++	if ((addr + cnts) > mapLen)
++		return _FAIL;
++
++	map = rtw_zmalloc(mapLen);
++	if(map == NULL){
++		return _FAIL;
++	}
++
++	ret = rtw_efuse_map_read(padapter, 0, mapLen, map);
++	if (ret == _FAIL) goto exit;
++
++	Efuse_PowerSwitch(padapter, _TRUE, _TRUE);
++
++	offset = (addr >> 3);
++	word_en = 0xF;
++	_rtw_memset(newdata, 0xFF, PGPKT_DATA_SIZE);
++	i = addr & 0x7;	// index of one package
++	j = 0;		// index of new package
++	idx = 0;	// data index
++
++	if (i & 0x1) {
++		// odd start
++		if (data[idx] != map[addr+idx]) {
++			word_en &= ~BIT(i >> 1);
++			newdata[i-1] = map[addr+idx-1];
++			newdata[i] = data[idx];
++		}
++		i++;
++		idx++;
++	}
++	do {
++		for (; i < PGPKT_DATA_SIZE; i += 2)
++		{
++			if (cnts == idx) break;
++			if ((cnts - idx) == 1) {
++				if (data[idx] != map[addr+idx]) {
++					word_en &= ~BIT(i >> 1);
++					newdata[i] = data[idx];
++					newdata[i+1] = map[addr+idx+1];
++				}
++				idx++;
++				break;
++			} else {
++				if ((data[idx] != map[addr+idx]) ||
++				    (data[idx+1] != map[addr+idx+1]))
++				{
++					word_en &= ~BIT(i >> 1);
++					newdata[i] = data[idx];
++					newdata[i+1] = data[idx + 1];
++				}
++				idx += 2;
++			}
++			if (idx == cnts) break;
++		}
++
++		if (word_en != 0xF) {
++			ret = Efuse_PgPacketWrite(padapter, offset, word_en, newdata, _FALSE);
++			DBG_871X("offset=%x \n",offset);
++			DBG_871X("word_en=%x \n",word_en);
++
++			for(i=0;i<PGPKT_DATA_SIZE;i++)
++			{
++				DBG_871X("data=%x \t",newdata[i]);
++			}
++			if (ret == _FAIL) break;
++		}
++
++		if (idx == cnts) break;
++
++		offset++;
++		i = 0;
++		j = 0;
++		word_en = 0xF;
++		_rtw_memset(newdata, 0xFF, PGPKT_DATA_SIZE);
++	} while (1);
++
++	Efuse_PowerSwitch(padapter, _TRUE, _FALSE);
++
++exit:
++
++	rtw_mfree(map, mapLen);
++
++	return ret;
++}
++
++
++/*-----------------------------------------------------------------------------
++ * Function:	Efuse_ReadAllMap
++ *
++ * Overview:	Read All Efuse content
++ *
++ * Input:       NONE
++ *
++ * Output:      NONE
++ *
++ * Return:      NONE
++ *
++ * Revised History:
++ * When			Who		Remark
++ * 11/11/2008 	MHC		Create Version 0.
++ *
++ *---------------------------------------------------------------------------*/
++VOID 
++Efuse_ReadAllMap(
++	IN		PADAPTER	pAdapter, 
++	IN		u8		efuseType,
++	IN OUT	u8		*Efuse,
++	IN		BOOLEAN		bPseudoTest);
++VOID 
++Efuse_ReadAllMap(
++	IN		PADAPTER	pAdapter, 
++	IN		u8		efuseType,
++	IN OUT	u8		*Efuse,
++	IN		BOOLEAN		bPseudoTest)
++{
++	u16	mapLen=0;
++
++	Efuse_PowerSwitch(pAdapter,_FALSE, _TRUE);
++
++	EFUSE_GetEfuseDefinition(pAdapter, efuseType, TYPE_EFUSE_MAP_LEN, (PVOID)&mapLen, bPseudoTest);
++
++	efuse_ReadEFuse(pAdapter, efuseType, 0, mapLen, Efuse, bPseudoTest);
++
++	Efuse_PowerSwitch(pAdapter,_FALSE, _FALSE);
++}
++
++/*-----------------------------------------------------------------------------
++ * Function:	efuse_ShadowRead1Byte
++ *			efuse_ShadowRead2Byte
++ *			efuse_ShadowRead4Byte
++ *
++ * Overview:	Read from efuse init map by one/two/four bytes !!!!!
++ *
++ * Input:       NONE
++ *
++ * Output:      NONE
++ *
++ * Return:      NONE
++ *
++ * Revised History:
++ * When			Who		Remark
++ * 11/12/2008 	MHC		Create Version 0.
++ *
++ *---------------------------------------------------------------------------*/
++static VOID
++efuse_ShadowRead1Byte(
++	IN	PADAPTER	pAdapter,
++	IN	u16		Offset,
++	IN OUT	u8		*Value)
++{
++	EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(pAdapter);
++
++	*Value = pEEPROM->efuse_eeprom_data[Offset];
++
++}	// EFUSE_ShadowRead1Byte
++
++//---------------Read Two Bytes
++static VOID
++efuse_ShadowRead2Byte(
++	IN	PADAPTER	pAdapter,
++	IN	u16		Offset,
++	IN OUT	u16		*Value)
++{
++	EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(pAdapter);
++
++	*Value = pEEPROM->efuse_eeprom_data[Offset];
++	*Value |= pEEPROM->efuse_eeprom_data[Offset+1]<<8;
++
++}	// EFUSE_ShadowRead2Byte
++
++//---------------Read Four Bytes
++static VOID
++efuse_ShadowRead4Byte(
++	IN	PADAPTER	pAdapter,
++	IN	u16		Offset,
++	IN OUT	u32		*Value)
++{
++	EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(pAdapter);
++
++	*Value = pEEPROM->efuse_eeprom_data[Offset];
++	*Value |= pEEPROM->efuse_eeprom_data[Offset+1]<<8;
++	*Value |= pEEPROM->efuse_eeprom_data[Offset+2]<<16;
++	*Value |= pEEPROM->efuse_eeprom_data[Offset+3]<<24;
++
++}	// efuse_ShadowRead4Byte
++
++
++/*-----------------------------------------------------------------------------
++ * Function:	efuse_ShadowWrite1Byte
++ *			efuse_ShadowWrite2Byte
++ *			efuse_ShadowWrite4Byte
++ *
++ * Overview:	Write efuse modify map by one/two/four byte.
++ *
++ * Input:       NONE
++ *
++ * Output:      NONE
++ *
++ * Return:      NONE
++ *
++ * Revised History:
++ * When			Who		Remark
++ * 11/12/2008 	MHC		Create Version 0.
++ *
++ *---------------------------------------------------------------------------*/
++#ifdef PLATFORM
++static VOID
++efuse_ShadowWrite1Byte(
++	IN	PADAPTER	pAdapter,
++	IN	u16		Offset,
++	IN 	u8		Value);
++#endif //PLATFORM
++static VOID
++efuse_ShadowWrite1Byte(
++	IN	PADAPTER	pAdapter,
++	IN	u16		Offset,
++	IN 	u8		Value)
++{
++	EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(pAdapter);
++
++	pEEPROM->efuse_eeprom_data[Offset] = Value;
++
++}	// efuse_ShadowWrite1Byte
++
++//---------------Write Two Bytes
++static VOID
++efuse_ShadowWrite2Byte(
++	IN	PADAPTER	pAdapter,
++	IN	u16		Offset,
++	IN 	u16		Value)
++{
++	EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(pAdapter);
++
++	pEEPROM->efuse_eeprom_data[Offset] = Value&0x00FF;
++	pEEPROM->efuse_eeprom_data[Offset+1] = Value>>8;
++
++}	// efuse_ShadowWrite1Byte
++
++//---------------Write Four Bytes
++static VOID
++efuse_ShadowWrite4Byte(
++	IN	PADAPTER	pAdapter,
++	IN	u16		Offset,
++	IN	u32		Value)
++{
++	EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(pAdapter);
++
++	pEEPROM->efuse_eeprom_data[Offset] = (u8)(Value&0x000000FF);
++	pEEPROM->efuse_eeprom_data[Offset+1] = (u8)((Value>>8)&0x0000FF);
++	pEEPROM->efuse_eeprom_data[Offset+2] = (u8)((Value>>16)&0x00FF);
++	pEEPROM->efuse_eeprom_data[Offset+3] = (u8)((Value>>24)&0xFF);
++
++}	// efuse_ShadowWrite1Byte
++
++/*-----------------------------------------------------------------------------
++ * Function:	EFUSE_ShadowMapUpdate
++ *
++ * Overview:	Transfer current EFUSE content to shadow init and modify map.
++ *
++ * Input:       NONE
++ *
++ * Output:      NONE
++ *
++ * Return:      NONE
++ *
++ * Revised History:
++ * When			Who		Remark
++ * 11/13/2008 	MHC		Create Version 0.
++ *
++ *---------------------------------------------------------------------------*/
++void EFUSE_ShadowMapUpdate(
++	IN PADAPTER	pAdapter,
++	IN u8		efuseType,
++	IN BOOLEAN	bPseudoTest)
++{
++	EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(pAdapter);
++	u16	mapLen=0;
++
++	EFUSE_GetEfuseDefinition(pAdapter, efuseType, TYPE_EFUSE_MAP_LEN, (PVOID)&mapLen, bPseudoTest);
++
++	if (pEEPROM->bautoload_fail_flag == _TRUE)
++	{
++		_rtw_memset(pEEPROM->efuse_eeprom_data, 0xFF, mapLen);
++	}
++	else
++	{
++		#ifdef CONFIG_ADAPTOR_INFO_CACHING_FILE			
++		if(_SUCCESS != retriveAdaptorInfoFile(pAdapter->registrypriv.adaptor_info_caching_file_path, pEEPROM)) {
++		#endif
++		
++		Efuse_ReadAllMap(pAdapter, efuseType, pEEPROM->efuse_eeprom_data, bPseudoTest);
++		
++		#ifdef CONFIG_ADAPTOR_INFO_CACHING_FILE
++			storeAdaptorInfoFile(pAdapter->registrypriv.adaptor_info_caching_file_path, pEEPROM);
++		}
++		#endif
++	}
++
++	//PlatformMoveMemory((PVOID)&pHalData->EfuseMap[EFUSE_MODIFY_MAP][0], 
++	//(PVOID)&pHalData->EfuseMap[EFUSE_INIT_MAP][0], mapLen);
++}// EFUSE_ShadowMapUpdate
++
++
++/*-----------------------------------------------------------------------------
++ * Function:	EFUSE_ShadowRead
++ *
++ * Overview:	Read from efuse init map !!!!!
++ *
++ * Input:       NONE
++ *
++ * Output:      NONE
++ *
++ * Return:      NONE
++ *
++ * Revised History:
++ * When			Who		Remark
++ * 11/12/2008 	MHC		Create Version 0.
++ *
++ *---------------------------------------------------------------------------*/
++void
++EFUSE_ShadowRead(
++	IN		PADAPTER	pAdapter,
++	IN		u8		Type,
++	IN		u16		Offset,
++	IN OUT	u32		*Value	)
++{
++	if (Type == 1)
++		efuse_ShadowRead1Byte(pAdapter, Offset, (u8 *)Value);
++	else if (Type == 2)
++		efuse_ShadowRead2Byte(pAdapter, Offset, (u16 *)Value);
++	else if (Type == 4)
++		efuse_ShadowRead4Byte(pAdapter, Offset, (u32 *)Value);
++	
++}	// EFUSE_ShadowRead
++
++/*-----------------------------------------------------------------------------
++ * Function:	EFUSE_ShadowWrite
++ *
++ * Overview:	Write efuse modify map for later update operation to use!!!!!
++ *
++ * Input:       NONE
++ *
++ * Output:      NONE
++ *
++ * Return:      NONE
++ *
++ * Revised History:
++ * When			Who		Remark
++ * 11/12/2008 	MHC		Create Version 0.
++ *
++ *---------------------------------------------------------------------------*/
++VOID
++EFUSE_ShadowWrite(
++	IN	PADAPTER	pAdapter,
++	IN	u8		Type,
++	IN	u16		Offset,
++	IN OUT	u32		Value);
++VOID
++EFUSE_ShadowWrite(
++	IN	PADAPTER	pAdapter,
++	IN	u8		Type,
++	IN	u16		Offset,
++	IN OUT	u32		Value)
++{
++#if (MP_DRIVER == 0)
++	return;
++#endif
++
++	if (Type == 1)
++		efuse_ShadowWrite1Byte(pAdapter, Offset, (u8)Value);
++	else if (Type == 2)
++		efuse_ShadowWrite2Byte(pAdapter, Offset, (u16)Value);
++	else if (Type == 4)
++		efuse_ShadowWrite4Byte(pAdapter, Offset, (u32)Value);
++
++}	// EFUSE_ShadowWrite
++
++VOID
++Efuse_InitSomeVar(
++	IN		PADAPTER	pAdapter
++	);
++VOID
++Efuse_InitSomeVar(
++	IN		PADAPTER	pAdapter
++	)
++{
++	u8 i;
++	
++	_rtw_memset((PVOID)&fakeEfuseContent[0], 0xff, EFUSE_MAX_HW_SIZE);
++	_rtw_memset((PVOID)&fakeEfuseInitMap[0], 0xff, EFUSE_MAX_MAP_LEN);
++	_rtw_memset((PVOID)&fakeEfuseModifiedMap[0], 0xff, EFUSE_MAX_MAP_LEN);
++
++	for(i=0; i<EFUSE_MAX_BT_BANK; i++)
++	{
++		_rtw_memset((PVOID)&BTEfuseContent[i][0], EFUSE_MAX_HW_SIZE, 0xff);
++	}
++	_rtw_memset((PVOID)&BTEfuseInitMap[0], 0xff, EFUSE_BT_MAX_MAP_LEN);
++	_rtw_memset((PVOID)&BTEfuseModifiedMap[0], 0xff, EFUSE_BT_MAX_MAP_LEN);
++
++	for(i=0; i<EFUSE_MAX_BT_BANK; i++)
++	{
++		_rtw_memset((PVOID)&fakeBTEfuseContent[i][0], 0xff, EFUSE_MAX_HW_SIZE);
++	}
++	_rtw_memset((PVOID)&fakeBTEfuseInitMap[0], 0xff, EFUSE_BT_MAX_MAP_LEN);
++	_rtw_memset((PVOID)&fakeBTEfuseModifiedMap[0], 0xff, EFUSE_BT_MAX_MAP_LEN);
++}
++
++#ifdef PLATFORM_LINUX
++#ifdef CONFIG_ADAPTOR_INFO_CACHING_FILE
++//#include <rtw_eeprom.h>
++
++ int isAdaptorInfoFileValid(void)
++{
++	return _TRUE;
++}
++
++int storeAdaptorInfoFile(char *path, struct eeprom_priv * eeprom_priv)
++{
++	int ret =_SUCCESS;
++
++	if(path && eeprom_priv) {
++		ret = rtw_store_to_file(path, eeprom_priv->efuse_eeprom_data, EEPROM_MAX_SIZE);
++		if(ret == EEPROM_MAX_SIZE)
++			ret = _SUCCESS;
++		else
++			ret = _FAIL;
++	} else {
++		DBG_871X("%s NULL pointer\n",__FUNCTION__);
++		ret =  _FAIL;
++	}
++	return ret;
++}
++
++int retriveAdaptorInfoFile(char *path, struct eeprom_priv * eeprom_priv)
++{
++	int ret = _SUCCESS;
++	mm_segment_t oldfs;
++	struct file *fp;
++	
++	if(path && eeprom_priv) {
++
++		ret = rtw_retrive_from_file(path, eeprom_priv->efuse_eeprom_data, EEPROM_MAX_SIZE);
++		
++		if(ret == EEPROM_MAX_SIZE)
++			ret = _SUCCESS;
++		else
++			ret = _FAIL;
++
++		#if 0
++		if(isAdaptorInfoFileValid()) {	
++			return 0;
++		} else {
++			return _FAIL;
++		}
++		#endif
++		
++	} else {
++		DBG_871X("%s NULL pointer\n",__FUNCTION__);
++		ret = _FAIL;
++	}
++	return ret;
++}
++#endif //CONFIG_ADAPTOR_INFO_CACHING_FILE
++#endif //PLATFORM_LINUX
++
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_ap.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_ap.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_ap.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_ap.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,2940 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _RTW_AP_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <wifi.h>
++
++
++#ifdef CONFIG_AP_MODE
++
++extern unsigned char	RTW_WPA_OUI[];
++extern unsigned char 	WMM_OUI[];
++extern unsigned char	WPS_OUI[];
++extern unsigned char	P2P_OUI[];
++extern unsigned char	WFD_OUI[];
++
++void init_mlme_ap_info(_adapter *padapter)
++{
++	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct sta_priv *pstapriv = &padapter->stapriv;	
++	struct wlan_acl_pool *pacl_list = &pstapriv->acl_list;
++	
++
++	_rtw_spinlock_init(&pmlmepriv->bcn_update_lock);	
++
++	//for ACL 
++	_rtw_init_queue(&pacl_list->acl_node_q);
++
++	//pmlmeext->bstart_bss = _FALSE;
++
++	start_ap_mode(padapter);
++}
++
++void free_mlme_ap_info(_adapter *padapter)
++{
++	_irqL irqL;
++	struct sta_info *psta=NULL;
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	//stop_ap_mode(padapter);
++
++	pmlmepriv->update_bcn = _FALSE;
++	pmlmeext->bstart_bss = _FALSE;	
++	
++	rtw_sta_flush(padapter);
++
++	pmlmeinfo->state = _HW_STATE_NOLINK_;
++
++	//free_assoc_sta_resources
++	rtw_free_all_stainfo(padapter);
++
++	//free bc/mc sta_info
++	psta = rtw_get_bcmc_stainfo(padapter);	
++	_enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL);		
++	rtw_free_stainfo(padapter, psta);
++	_exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL);
++	
++
++	_rtw_spinlock_free(&pmlmepriv->bcn_update_lock);
++	
++}
++
++static void update_BCNTIM(_adapter *padapter)
++{
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info);
++	WLAN_BSSID_EX *pnetwork_mlmeext = &(pmlmeinfo->network);
++	unsigned char *pie = pnetwork_mlmeext->IEs;
++
++	//DBG_871X("%s\n", __FUNCTION__);
++	
++	//update TIM IE
++	//if(pstapriv->tim_bitmap)
++	if(_TRUE)
++	{
++		u8 *p, *dst_ie, *premainder_ie=NULL, *pbackup_remainder_ie=NULL;
++		u16 tim_bitmap_le;
++		uint offset, tmp_len, tim_ielen, tim_ie_offset, remainder_ielen;	
++	
++		tim_bitmap_le = cpu_to_le16(pstapriv->tim_bitmap);
++
++		p = rtw_get_ie(pie + _FIXED_IE_LENGTH_, _TIM_IE_, &tim_ielen, pnetwork_mlmeext->IELength - _FIXED_IE_LENGTH_);
++		if (p != NULL && tim_ielen>0)
++		{
++			tim_ielen += 2;
++			
++			premainder_ie = p+tim_ielen;
++
++			tim_ie_offset = (sint)(p -pie);
++			
++			remainder_ielen = pnetwork_mlmeext->IELength - tim_ie_offset - tim_ielen;
++
++			//append TIM IE from dst_ie offset
++			dst_ie = p;
++		}
++		else
++		{
++			tim_ielen = 0;
++
++			//calucate head_len		
++			offset = _FIXED_IE_LENGTH_;
++
++			/* get ssid_ie len */
++			p = rtw_get_ie(pie + _BEACON_IE_OFFSET_, _SSID_IE_, &tmp_len, (pnetwork_mlmeext->IELength - _BEACON_IE_OFFSET_));
++			if (p !=  NULL)
++				offset += tmp_len+2;
++
++			// get supported rates len
++			p = rtw_get_ie(pie + _BEACON_IE_OFFSET_, _SUPPORTEDRATES_IE_, &tmp_len, (pnetwork_mlmeext->IELength - _BEACON_IE_OFFSET_));	
++			if (p !=  NULL) 
++			{			
++				offset += tmp_len+2;
++			}
++
++			//DS Parameter Set IE, len=3	
++			offset += 3;
++
++			premainder_ie = pie + offset;
++
++			remainder_ielen = pnetwork_mlmeext->IELength - offset - tim_ielen;	
++
++			//append TIM IE from offset
++			dst_ie = pie + offset;
++			
++		}
++
++		
++		if(remainder_ielen>0)
++		{
++			pbackup_remainder_ie = rtw_malloc(remainder_ielen);
++			if(pbackup_remainder_ie && premainder_ie)
++				_rtw_memcpy(pbackup_remainder_ie, premainder_ie, remainder_ielen);
++		}		
++
++		*dst_ie++=_TIM_IE_;
++
++		if((pstapriv->tim_bitmap&0xff00) && (pstapriv->tim_bitmap&0x00fc))			
++			tim_ielen = 5;
++		else
++			tim_ielen = 4;
++
++		*dst_ie++= tim_ielen;
++		
++		*dst_ie++=0;//DTIM count
++		*dst_ie++=1;//DTIM peroid
++		
++		if(pstapriv->tim_bitmap&BIT(0))//for bc/mc frames
++			*dst_ie++ = BIT(0);//bitmap ctrl 
++		else
++			*dst_ie++ = 0;
++
++		if(tim_ielen==4)
++		{
++			*dst_ie++ = *(u8*)&tim_bitmap_le;
++		}	
++		else if(tim_ielen==5)
++		{
++			_rtw_memcpy(dst_ie, &tim_bitmap_le, 2);
++			dst_ie+=2;				
++		}	
++		
++		//copy remainder IE
++		if(pbackup_remainder_ie)
++		{
++			_rtw_memcpy(dst_ie, pbackup_remainder_ie, remainder_ielen);
++
++			rtw_mfree(pbackup_remainder_ie, remainder_ielen);
++		}	
++
++		offset =  (uint)(dst_ie - pie);
++		pnetwork_mlmeext->IELength = offset + remainder_ielen;
++	
++	}
++
++#ifndef CONFIG_INTERRUPT_BASED_TXBCN 
++#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI)
++	set_tx_beacon_cmd(padapter);
++#endif
++#endif //!CONFIG_INTERRUPT_BASED_TXBCN
++
++
++}
++
++void rtw_add_bcn_ie(_adapter *padapter, WLAN_BSSID_EX *pnetwork, u8 index, u8 *data, u8 len)
++{
++	PNDIS_802_11_VARIABLE_IEs	pIE;
++	u8	bmatch = _FALSE;
++	u8	*pie = pnetwork->IEs;
++	u8	*p, *dst_ie, *premainder_ie=NULL, *pbackup_remainder_ie=NULL;
++	u32	i, offset, ielen, ie_offset, remainder_ielen = 0;
++
++	for (i = sizeof(NDIS_802_11_FIXED_IEs); i < pnetwork->IELength;)
++	{
++		pIE = (PNDIS_802_11_VARIABLE_IEs)(pnetwork->IEs + i);
++
++		if (pIE->ElementID > index)
++		{
++			break;
++		}
++		else if(pIE->ElementID == index) // already exist the same IE
++		{
++			p = (u8 *)pIE;
++			ielen = pIE->Length;
++			bmatch = _TRUE;
++			break;
++		}
++
++		p = (u8 *)pIE;
++		ielen = pIE->Length;
++		i += (pIE->Length + 2);
++	}
++
++	if (p != NULL && ielen>0)
++	{
++		ielen += 2;
++		
++		premainder_ie = p+ielen;
++
++		ie_offset = (sint)(p -pie);
++		
++		remainder_ielen = pnetwork->IELength - ie_offset - ielen;
++
++		if(bmatch)
++			dst_ie = p;
++		else
++			dst_ie = (p+ielen);
++	}
++
++	if(remainder_ielen>0)
++	{
++		pbackup_remainder_ie = rtw_malloc(remainder_ielen);
++		if(pbackup_remainder_ie && premainder_ie)
++			_rtw_memcpy(pbackup_remainder_ie, premainder_ie, remainder_ielen);
++	}
++
++	*dst_ie++=index;
++	*dst_ie++=len;
++
++	_rtw_memcpy(dst_ie, data, len);
++	dst_ie+=len;
++
++	//copy remainder IE
++	if(pbackup_remainder_ie)
++	{
++		_rtw_memcpy(dst_ie, pbackup_remainder_ie, remainder_ielen);
++
++		rtw_mfree(pbackup_remainder_ie, remainder_ielen);
++	}
++
++	offset =  (uint)(dst_ie - pie);
++	pnetwork->IELength = offset + remainder_ielen;
++}
++
++void rtw_remove_bcn_ie(_adapter *padapter, WLAN_BSSID_EX *pnetwork, u8 index)
++{
++	u8 *p, *dst_ie, *premainder_ie=NULL, *pbackup_remainder_ie=NULL;
++	uint offset, ielen, ie_offset, remainder_ielen = 0;
++	u8	*pie = pnetwork->IEs;
++
++	p = rtw_get_ie(pie + _FIXED_IE_LENGTH_, index, &ielen, pnetwork->IELength - _FIXED_IE_LENGTH_);
++	if (p != NULL && ielen>0)
++	{
++		ielen += 2;
++		
++		premainder_ie = p+ielen;
++
++		ie_offset = (sint)(p -pie);
++		
++		remainder_ielen = pnetwork->IELength - ie_offset - ielen;
++
++		dst_ie = p;
++	}
++	else {
++		return;
++	}
++
++	if(remainder_ielen>0)
++	{
++		pbackup_remainder_ie = rtw_malloc(remainder_ielen);
++		if(pbackup_remainder_ie && premainder_ie)
++			_rtw_memcpy(pbackup_remainder_ie, premainder_ie, remainder_ielen);
++	}
++
++	//copy remainder IE
++	if(pbackup_remainder_ie)
++	{
++		_rtw_memcpy(dst_ie, pbackup_remainder_ie, remainder_ielen);
++
++		rtw_mfree(pbackup_remainder_ie, remainder_ielen);
++	}
++
++	offset =  (uint)(dst_ie - pie);
++	pnetwork->IELength = offset + remainder_ielen;
++}
++
++
++u8 chk_sta_is_alive(struct sta_info *psta);
++u8 chk_sta_is_alive(struct sta_info *psta)
++{
++	u8 ret = _FALSE;
++	#ifdef DBG_EXPIRATION_CHK
++	DBG_871X("sta:"MAC_FMT", rssi:%d, rx:"STA_PKTS_FMT", expire_to:%u, %s%ssq_len:%u\n"
++		, MAC_ARG(psta->hwaddr)
++		, psta->rssi_stat.UndecoratedSmoothedPWDB
++		//, STA_RX_PKTS_ARG(psta)
++		, STA_RX_PKTS_DIFF_ARG(psta)
++		, psta->expire_to
++		, psta->state&WIFI_SLEEP_STATE?"PS, ":""
++		, psta->state&WIFI_STA_ALIVE_CHK_STATE?"SAC, ":""
++		, psta->sleepq_len
++	);
++	#endif
++
++	//if(sta_last_rx_pkts(psta) == sta_rx_pkts(psta))
++	if((psta->sta_stats.last_rx_data_pkts + psta->sta_stats.last_rx_ctrl_pkts) == (psta->sta_stats.rx_data_pkts + psta->sta_stats.rx_ctrl_pkts))
++	{
++		#if 0
++		if(psta->state&WIFI_SLEEP_STATE)
++			ret = _TRUE;
++		#endif
++	}
++	else
++	{
++		ret = _TRUE;
++	}
++
++	sta_update_last_rx_pkts(psta);
++
++	return ret;
++}
++
++void	expire_timeout_chk(_adapter *padapter)
++{
++	_irqL irqL;
++	_list	*phead, *plist;
++	u8 updated;
++	struct sta_info *psta=NULL;	
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	u8 chk_alive_num = 0;
++	char chk_alive_list[NUM_STA];
++	int i;
++
++	_enter_critical_bh(&pstapriv->auth_list_lock, &irqL);
++	
++	phead = &pstapriv->auth_list;
++	plist = get_next(phead);
++
++	//check auth_queue
++	#ifdef DBG_EXPIRATION_CHK
++	if (rtw_end_of_queue_search(phead, plist) == _FALSE) {
++		DBG_871X(FUNC_NDEV_FMT" auth_list, cnt:%u\n"
++			, FUNC_NDEV_ARG(padapter->pnetdev), pstapriv->auth_list_cnt);
++	}
++	#endif
++	while ((rtw_end_of_queue_search(phead, plist)) == _FALSE)	
++	{
++		psta = LIST_CONTAINOR(plist, struct sta_info, auth_list);
++		plist = get_next(plist);
++	
++		if(psta->expire_to>0)
++		{
++			psta->expire_to--;
++			if (psta->expire_to == 0)
++			{				
++				rtw_list_delete(&psta->auth_list);
++				pstapriv->auth_list_cnt--;
++				
++				DBG_871X("auth expire %02X%02X%02X%02X%02X%02X\n",
++					psta->hwaddr[0],psta->hwaddr[1],psta->hwaddr[2],psta->hwaddr[3],psta->hwaddr[4],psta->hwaddr[5]);
++				
++				_exit_critical_bh(&pstapriv->auth_list_lock, &irqL);
++				
++				_enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL);	
++				rtw_free_stainfo(padapter, psta);
++				_exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL);	
++				
++				_enter_critical_bh(&pstapriv->auth_list_lock, &irqL);
++			}	
++		}	
++		
++	}
++
++	_exit_critical_bh(&pstapriv->auth_list_lock, &irqL);
++
++	psta = NULL;
++	
++
++	_enter_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++	
++	phead = &pstapriv->asoc_list;
++	plist = get_next(phead);
++
++	//check asoc_queue
++	#ifdef DBG_EXPIRATION_CHK
++	if (rtw_end_of_queue_search(phead, plist) == _FALSE) {
++		DBG_871X(FUNC_NDEV_FMT" asoc_list, cnt:%u\n"
++			, FUNC_NDEV_ARG(padapter->pnetdev), pstapriv->asoc_list_cnt);
++	}
++	#endif
++	while ((rtw_end_of_queue_search(phead, plist)) == _FALSE)
++	{
++		psta = LIST_CONTAINOR(plist, struct sta_info, asoc_list);
++		plist = get_next(plist);
++	
++		if (chk_sta_is_alive(psta) || !psta->expire_to) {
++			psta->expire_to = pstapriv->expire_to;
++			psta->keep_alive_trycnt = 0;
++			#ifdef CONFIG_TX_MCAST2UNI
++			psta->under_exist_checking = 0;
++			#endif	// CONFIG_TX_MCAST2UNI
++		} else {
++			psta->expire_to--;
++		}
++
++#ifndef CONFIG_ACTIVE_KEEP_ALIVE_CHECK
++#ifdef CONFIG_TX_MCAST2UNI
++		if ( (psta->flags & WLAN_STA_HT) && (psta->htpriv.agg_enable_bitmap || psta->under_exist_checking) ) {
++			// check sta by delba(addba) for 11n STA 
++			// ToDo: use CCX report to check for all STAs
++			//DBG_871X("asoc check by DELBA/ADDBA! (pstapriv->expire_to=%d s)(psta->expire_to=%d s), [%02x, %d]\n", pstapriv->expire_to*2, psta->expire_to*2, psta->htpriv.agg_enable_bitmap, psta->under_exist_checking);
++			
++			if ( psta->expire_to <= (pstapriv->expire_to - 50 ) ) {
++				DBG_871X("asoc expire by DELBA/ADDBA! (%d s)\n", (pstapriv->expire_to-psta->expire_to)*2);
++				psta->under_exist_checking = 0;
++				psta->expire_to = 0;
++			} else if ( psta->expire_to <= (pstapriv->expire_to - 3) && (psta->under_exist_checking==0)) {
++				DBG_871X("asoc check by DELBA/ADDBA! (%d s)\n", (pstapriv->expire_to-psta->expire_to)*2);
++				psta->under_exist_checking = 1;
++				//tear down TX AMPDU
++				send_delba(padapter, 1, psta->hwaddr);// // originator
++				psta->htpriv.agg_enable_bitmap = 0x0;//reset
++				psta->htpriv.candidate_tid_bitmap = 0x0;//reset
++			}
++		}
++#endif // CONFIG_TX_MCAST2UNI
++#endif //CONFIG_ACTIVE_KEEP_ALIVE_CHECK
++
++		if (psta->expire_to <= 0)
++		{
++			#ifdef CONFIG_ACTIVE_KEEP_ALIVE_CHECK
++			struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
++
++			if (padapter->registrypriv.wifi_spec == 1)
++			{
++				psta->expire_to = pstapriv->expire_to;
++				continue;
++			}
++
++			if (psta->state & WIFI_SLEEP_STATE) {
++				if (!(psta->state & WIFI_STA_ALIVE_CHK_STATE)) {
++					//to check if alive by another methods if staion is at ps mode.					
++					psta->expire_to = pstapriv->expire_to;
++					psta->state |= WIFI_STA_ALIVE_CHK_STATE;
++
++					//DBG_871X("alive chk, sta:" MAC_FMT " is at ps mode!\n", MAC_ARG(psta->hwaddr));
++
++					//to update bcn with tim_bitmap for this station
++					pstapriv->tim_bitmap |= BIT(psta->aid);
++					update_beacon(padapter, _TIM_IE_, NULL, _FALSE);
++
++					if(!pmlmeext->active_keep_alive_check)
++						continue;
++				}
++			}
++
++			if (pmlmeext->active_keep_alive_check) {
++				int stainfo_offset;
++
++				stainfo_offset = rtw_stainfo_offset(pstapriv, psta);
++				if (stainfo_offset_valid(stainfo_offset)) {
++					chk_alive_list[chk_alive_num++] = stainfo_offset;
++				}
++
++				continue;
++			}
++			#endif /* CONFIG_ACTIVE_KEEP_ALIVE_CHECK */
++
++			rtw_list_delete(&psta->asoc_list);
++			pstapriv->asoc_list_cnt--;
++
++			DBG_871X("asoc expire "MAC_FMT", state=0x%x\n", MAC_ARG(psta->hwaddr), psta->state);
++			updated = ap_free_sta(padapter, psta, _FALSE, WLAN_REASON_DEAUTH_LEAVING);
++		}	
++		else
++		{
++			/* TODO: Aging mechanism to digest frames in sleep_q to avoid running out of xmitframe */
++			if (psta->sleepq_len > (NR_XMITFRAME/pstapriv->asoc_list_cnt)
++				&& padapter->xmitpriv.free_xmitframe_cnt < (NR_XMITFRAME/pstapriv->asoc_list_cnt/2)
++			){
++				DBG_871X("%s sta:"MAC_FMT", sleepq_len:%u, free_xmitframe_cnt:%u, asoc_list_cnt:%u, clear sleep_q\n", __func__
++					, MAC_ARG(psta->hwaddr)
++					, psta->sleepq_len, padapter->xmitpriv.free_xmitframe_cnt, pstapriv->asoc_list_cnt);
++				wakeup_sta_to_xmit(padapter, psta);
++			}
++		}
++	}
++
++	_exit_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++
++#ifdef CONFIG_ACTIVE_KEEP_ALIVE_CHECK
++if (chk_alive_num) {
++
++	u8 backup_oper_channel=0;
++	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
++	/* switch to correct channel of current network  before issue keep-alive frames */
++	if (rtw_get_oper_ch(padapter) != pmlmeext->cur_channel) {
++		backup_oper_channel = rtw_get_oper_ch(padapter);
++		SelectChannel(padapter, pmlmeext->cur_channel);
++	}
++
++	/* issue null data to check sta alive*/
++	for (i = 0; i < chk_alive_num; i++) {
++		
++		int ret = _FAIL;
++
++		psta = rtw_get_stainfo_by_offset(pstapriv, chk_alive_list[i]);
++		if(!(psta->state &_FW_LINKED))
++			continue;		
++
++		if (psta->state & WIFI_SLEEP_STATE)
++			ret = issue_nulldata(padapter, psta->hwaddr, 0, 1, 50);
++		else
++			ret = issue_nulldata(padapter, psta->hwaddr, 0, 3, 50);
++
++		psta->keep_alive_trycnt++;
++		if (ret == _SUCCESS)
++		{
++			DBG_871X("asoc check, sta(" MAC_FMT ") is alive\n", MAC_ARG(psta->hwaddr));
++			psta->expire_to = pstapriv->expire_to;
++			psta->keep_alive_trycnt = 0;
++			continue;
++		}
++		else if (psta->keep_alive_trycnt <= 3)
++		{
++			DBG_871X("ack check for asoc expire, keep_alive_trycnt=%d\n", psta->keep_alive_trycnt);
++			psta->expire_to = 1;
++			continue;
++		}
++
++		psta->keep_alive_trycnt = 0;
++
++		DBG_871X("asoc expire "MAC_FMT", state=0x%x\n", MAC_ARG(psta->hwaddr), psta->state);
++		_enter_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++		if (rtw_is_list_empty(&psta->asoc_list)==_FALSE) {
++			rtw_list_delete(&psta->asoc_list);
++			pstapriv->asoc_list_cnt--;
++			updated = ap_free_sta(padapter, psta, _FALSE, WLAN_REASON_DEAUTH_LEAVING);
++		}
++		_exit_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++
++	}
++
++	if (backup_oper_channel>0) /* back to the original operation channel */
++		SelectChannel(padapter, backup_oper_channel);
++}
++#endif /* CONFIG_ACTIVE_KEEP_ALIVE_CHECK */
++
++	associated_clients_update(padapter, updated);
++}
++
++
++static void add_RATid(_adapter *padapter, struct sta_info *psta)
++{	
++	int i;
++	u8 rf_type;
++	u32 init_rate=0;
++	unsigned char sta_band = 0, raid, shortGIrate = _FALSE;
++	unsigned char limit;	
++	unsigned int tx_ra_bitmap=0;
++	struct ht_priv	*psta_ht = NULL;
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	WLAN_BSSID_EX *pcur_network = (WLAN_BSSID_EX *)&pmlmepriv->cur_network.network;	
++
++	
++	if(psta)
++		psta_ht = &psta->htpriv;
++	else
++		return;
++	
++	//b/g mode ra_bitmap  
++	for (i=0; i<sizeof(psta->bssrateset); i++)
++	{
++		if (psta->bssrateset[i])
++			tx_ra_bitmap |= rtw_get_bit_value_from_ieee_value(psta->bssrateset[i]&0x7f);
++	}
++
++	//n mode ra_bitmap
++	if(psta_ht->ht_option) 
++	{
++		rtw_hal_get_hwreg(padapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type));
++		if(rf_type == RF_2T2R)
++			limit=16;// 2R
++		else
++			limit=8;//  1R
++
++		for (i=0; i<limit; i++) {
++			if (psta_ht->ht_cap.supp_mcs_set[i/8] & BIT(i%8))
++				tx_ra_bitmap |= BIT(i+12);
++		}
++
++		//max short GI rate
++		shortGIrate = psta_ht->sgi;
++	}
++
++
++#if 0//gtest
++	if(get_rf_mimo_mode(padapter) == RTL8712_RF_2T2R)
++	{
++		//is this a 2r STA?
++		if((pstat->tx_ra_bitmap & 0x0ff00000) != 0 && !(priv->pshare->has_2r_sta & BIT(pstat->aid)))
++		{
++			priv->pshare->has_2r_sta |= BIT(pstat->aid);
++			if(rtw_read16(padapter, 0x102501f6) != 0xffff)
++			{
++				rtw_write16(padapter, 0x102501f6, 0xffff);
++				reset_1r_sta_RA(priv, 0xffff);
++				Switch_1SS_Antenna(priv, 3);
++			}
++		}
++		else// bg or 1R STA? 
++		{ 
++			if((priv->pmib->dot11BssType.net_work_type & WIRELESS_11N) && pstat->ht_cap_len && priv->pshare->has_2r_sta == 0)
++			{
++				if(rtw_read16(padapter, 0x102501f6) != 0x7777)
++				{ // MCS7 SGI
++					rtw_write16(padapter, 0x102501f6,0x7777);
++					reset_1r_sta_RA(priv, 0x7777);
++					Switch_1SS_Antenna(priv, 2);
++				}
++			}
++		}
++		
++	}
++
++	if ((pstat->rssi_level < 1) || (pstat->rssi_level > 3)) 
++	{
++		if (pstat->rssi >= priv->pshare->rf_ft_var.raGoDownUpper)
++			pstat->rssi_level = 1;
++		else if ((pstat->rssi >= priv->pshare->rf_ft_var.raGoDown20MLower) ||
++			((priv->pshare->is_40m_bw) && (pstat->ht_cap_len) &&
++			(pstat->rssi >= priv->pshare->rf_ft_var.raGoDown40MLower) &&
++			(pstat->ht_cap_buf.ht_cap_info & cpu_to_le16(_HTCAP_SUPPORT_CH_WDTH_))))
++			pstat->rssi_level = 2;
++		else
++			pstat->rssi_level = 3;
++	}
++
++	// rate adaptive by rssi
++	if ((priv->pmib->dot11BssType.net_work_type & WIRELESS_11N) && pstat->ht_cap_len)
++	{
++		if ((get_rf_mimo_mode(priv) == MIMO_1T2R) || (get_rf_mimo_mode(priv) == MIMO_1T1R))
++		{
++			switch (pstat->rssi_level) {
++				case 1:
++					pstat->tx_ra_bitmap &= 0x100f0000;
++					break;
++				case 2:
++					pstat->tx_ra_bitmap &= 0x100ff000;
++					break;
++				case 3:
++					if (priv->pshare->is_40m_bw)
++						pstat->tx_ra_bitmap &= 0x100ff005;
++					else
++						pstat->tx_ra_bitmap &= 0x100ff001;
++
++					break;
++			}
++		}
++		else 
++		{
++			switch (pstat->rssi_level) {
++				case 1:
++					pstat->tx_ra_bitmap &= 0x1f0f0000;
++					break;
++				case 2:
++					pstat->tx_ra_bitmap &= 0x1f0ff000;
++					break;
++				case 3:
++					if (priv->pshare->is_40m_bw)
++						pstat->tx_ra_bitmap &= 0x000ff005;
++					else
++						pstat->tx_ra_bitmap &= 0x000ff001;
++
++					break;
++			}
++
++			// Don't need to mask high rates due to new rate adaptive parameters
++			//if (pstat->is_broadcom_sta)		// use MCS12 as the highest rate vs. Broadcom sta
++			//	pstat->tx_ra_bitmap &= 0x81ffffff;
++
++			// NIC driver will report not supporting MCS15 and MCS14 in asoc req
++			//if (pstat->is_rtl8190_sta && !pstat->is_2t_mimo_sta)
++			//	pstat->tx_ra_bitmap &= 0x83ffffff;		// if Realtek 1x2 sta, don't use MCS15 and MCS14
++		}
++	}
++	else if ((priv->pmib->dot11BssType.net_work_type & WIRELESS_11G) && isErpSta(pstat))
++	{
++		switch (pstat->rssi_level) {
++			case 1:
++				pstat->tx_ra_bitmap &= 0x00000f00;
++				break;
++			case 2:
++				pstat->tx_ra_bitmap &= 0x00000ff0;
++				break;
++			case 3:
++				pstat->tx_ra_bitmap &= 0x00000ff5;
++				break;
++		}
++	}
++	else 
++	{
++		pstat->tx_ra_bitmap &= 0x0000000d;
++	}
++
++	// disable tx short GI when station cannot rx MCS15(AP is 2T2R)
++	// disable tx short GI when station cannot rx MCS7 (AP is 1T2R or 1T1R)
++	// if there is only 1r STA and we are 2T2R, DO NOT mask SGI rate
++	if ((!(pstat->tx_ra_bitmap & 0x8000000) && (priv->pshare->has_2r_sta > 0) && (get_rf_mimo_mode(padapter) == RTL8712_RF_2T2R)) ||
++		 (!(pstat->tx_ra_bitmap & 0x80000) && (get_rf_mimo_mode(padapter) != RTL8712_RF_2T2R)))
++	{
++		pstat->tx_ra_bitmap &= ~BIT(28);	
++	}
++#endif
++
++	if ( pcur_network->Configuration.DSConfig > 14 ) {
++		// 5G band
++		if (tx_ra_bitmap & 0xffff000)
++			sta_band |= WIRELESS_11_5N | WIRELESS_11A;
++		else
++			sta_band |= WIRELESS_11A;
++	} else {
++		if (tx_ra_bitmap & 0xffff000)
++			sta_band |= WIRELESS_11_24N | WIRELESS_11G | WIRELESS_11B;
++		else if (tx_ra_bitmap & 0xff0)
++			sta_band |= WIRELESS_11G |WIRELESS_11B;
++		else
++			sta_band |= WIRELESS_11B;
++	}
++
++	raid = networktype_to_raid(sta_band);	
++	init_rate = get_highest_rate_idx(tx_ra_bitmap&0x0fffffff)&0x3f;
++	
++	if (psta->aid < NUM_STA) 
++	{
++		u8 arg = 0;
++
++		arg = psta->mac_id&0x1f;
++		
++		arg |= BIT(7);//support entry 2~31
++		
++		if (shortGIrate==_TRUE)
++			arg |= BIT(5);
++
++		tx_ra_bitmap |= ((raid<<28)&0xf0000000);
++
++		DBG_871X("%s=> mac_id:%d , raid:%d , bitmap=0x%x, arg=0x%x\n", 
++			__FUNCTION__ , psta->mac_id, raid ,tx_ra_bitmap, arg);
++
++		//bitmap[0:27] = tx_rate_bitmap
++		//bitmap[28:31]= Rate Adaptive id
++		//arg[0:4] = macid
++		//arg[5] = Short GI
++		rtw_hal_add_ra_tid(padapter, tx_ra_bitmap, arg);
++
++		if (shortGIrate==_TRUE)
++			init_rate |= BIT(6);
++		
++		//set ra_id, init_rate
++		psta->raid = raid;
++		psta->init_rate = init_rate;
++		
++	}
++	else 
++	{
++		DBG_871X("station aid %d exceed the max number\n", psta->aid);
++	}
++
++}
++
++static void update_bmc_sta(_adapter *padapter)
++{
++	_irqL	irqL;
++	u32 init_rate=0;
++	unsigned char	network_type, raid;
++	int i, supportRateNum = 0;	
++	unsigned int tx_ra_bitmap=0;
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	WLAN_BSSID_EX *pcur_network = (WLAN_BSSID_EX *)&pmlmepriv->cur_network.network;	
++	struct sta_info *psta = rtw_get_bcmc_stainfo(padapter);
++
++	if(psta)
++	{
++		psta->aid = 0;//default set to 0
++		//psta->mac_id = psta->aid+4;	
++		psta->mac_id = psta->aid + 1;
++
++		psta->qos_option = 0;		
++		psta->htpriv.ht_option = _FALSE;
++
++		psta->ieee8021x_blocked = 0;
++
++		_rtw_memset((void*)&psta->sta_stats, 0, sizeof(struct stainfo_stats));
++
++		//psta->dot118021XPrivacy = _NO_PRIVACY_;//!!! remove it, because it has been set before this.
++
++
++
++		//prepare for add_RATid		
++		supportRateNum = rtw_get_rateset_len((u8*)&pcur_network->SupportedRates);
++		network_type = rtw_check_network_type((u8*)&pcur_network->SupportedRates, supportRateNum, 1);
++		
++		_rtw_memcpy(psta->bssrateset, &pcur_network->SupportedRates, supportRateNum);
++		psta->bssratelen = supportRateNum;
++
++		//b/g mode ra_bitmap  
++		for (i=0; i<supportRateNum; i++)
++		{	
++			if (psta->bssrateset[i])
++				tx_ra_bitmap |= rtw_get_bit_value_from_ieee_value(psta->bssrateset[i]&0x7f);
++		}
++
++		if ( pcur_network->Configuration.DSConfig > 14 ) {
++			//force to A mode. 5G doesn't support CCK rates
++			network_type = WIRELESS_11A;
++			tx_ra_bitmap = 0x150; // 6, 12, 24 Mbps
++		} else {
++			//force to b mode 
++			network_type = WIRELESS_11B;
++			tx_ra_bitmap = 0xf;		
++		}
++
++		//tx_ra_bitmap = update_basic_rate(pcur_network->SupportedRates, supportRateNum);
++
++		raid = networktype_to_raid(network_type);
++		init_rate = get_highest_rate_idx(tx_ra_bitmap&0x0fffffff)&0x3f;
++				
++		//DBG_871X("Add id %d val %08x to ratr for bmc sta\n", psta->aid, tx_ra_bitmap);
++
++		//if(pHalData->fw_ractrl == _TRUE)
++		{
++			u8 arg = 0;
++
++			arg = psta->mac_id&0x1f;
++		
++			arg |= BIT(7);
++		
++			//if (shortGIrate==_TRUE)
++			//	arg |= BIT(5);
++			
++			tx_ra_bitmap |= ((raid<<28)&0xf0000000);			
++
++			DBG_871X("update_bmc_sta, mask=0x%x, arg=0x%x\n", tx_ra_bitmap, arg);
++
++			//bitmap[0:27] = tx_rate_bitmap
++			//bitmap[28:31]= Rate Adaptive id
++			//arg[0:4] = macid
++			//arg[5] = Short GI
++			rtw_hal_add_ra_tid(padapter, tx_ra_bitmap, arg);			
++		
++		}
++
++		//set ra_id, init_rate
++		psta->raid = raid;
++		psta->init_rate = init_rate;
++	 
++		_enter_critical_bh(&psta->lock, &irqL);
++		psta->state = _FW_LINKED;
++		_exit_critical_bh(&psta->lock, &irqL);
++
++	}
++	else
++	{
++		DBG_871X("add_RATid_bmc_sta error!\n");
++	}
++		
++}
++
++//notes:
++//AID: 1~MAX for sta and 0 for bc/mc in ap/adhoc mode 
++//MAC_ID = AID+1 for sta in ap/adhoc mode 
++//MAC_ID = 1 for bc/mc for sta/ap/adhoc
++//MAC_ID = 0 for bssid for sta/ap/adhoc
++//CAM_ID = //0~3 for default key, cmd_id=macid + 3, macid=aid+1;
++
++void update_sta_info_apmode(_adapter *padapter, struct sta_info *psta)
++{	
++	_irqL	irqL;
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct security_priv *psecuritypriv = &padapter->securitypriv;
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct ht_priv	*phtpriv_ap = &pmlmepriv->htpriv;
++	struct ht_priv	*phtpriv_sta = &psta->htpriv;
++
++	//set intf_tag to if1
++	//psta->intf_tag = 0;
++
++	//psta->mac_id = psta->aid+4;
++	psta->mac_id = psta->aid+1; 
++	
++	if(psecuritypriv->dot11AuthAlgrthm==dot11AuthAlgrthm_8021X)
++		psta->ieee8021x_blocked = _TRUE;
++	else
++		psta->ieee8021x_blocked = _FALSE;
++	
++
++	//update sta's cap
++	
++	//ERP
++	VCS_update(padapter, psta);
++		
++	//HT related cap
++	if(phtpriv_sta->ht_option)
++	{
++		//check if sta supports rx ampdu
++		phtpriv_sta->ampdu_enable = phtpriv_ap->ampdu_enable;
++
++		//check if sta support s Short GI
++		if((phtpriv_sta->ht_cap.cap_info & phtpriv_ap->ht_cap.cap_info) & cpu_to_le16(IEEE80211_HT_CAP_SGI_20|IEEE80211_HT_CAP_SGI_40))
++		{
++			phtpriv_sta->sgi = _TRUE;
++		}
++
++		// bwmode
++		if((phtpriv_sta->ht_cap.cap_info & phtpriv_ap->ht_cap.cap_info) & cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH))
++		{
++			//phtpriv_sta->bwmode = HT_CHANNEL_WIDTH_40;
++			phtpriv_sta->bwmode = pmlmeext->cur_bwmode;
++			phtpriv_sta->ch_offset = pmlmeext->cur_ch_offset;
++			
++		}		
++
++		psta->qos_option = _TRUE;
++		
++	}
++	else
++	{
++		phtpriv_sta->ampdu_enable = _FALSE;
++		
++		phtpriv_sta->sgi = _FALSE;
++		phtpriv_sta->bwmode = HT_CHANNEL_WIDTH_20;
++		phtpriv_sta->ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++	}
++
++	//Rx AMPDU
++	send_delba(padapter, 0, psta->hwaddr);// recipient
++	
++	//TX AMPDU
++	send_delba(padapter, 1, psta->hwaddr);// // originator
++	phtpriv_sta->agg_enable_bitmap = 0x0;//reset
++	phtpriv_sta->candidate_tid_bitmap = 0x0;//reset
++	
++
++	//todo: init other variables
++	
++	_rtw_memset((void*)&psta->sta_stats, 0, sizeof(struct stainfo_stats));
++
++
++	//add ratid
++	//add_RATid(padapter, psta);//move to ap_sta_info_defer_update()
++
++
++	_enter_critical_bh(&psta->lock, &irqL);
++	psta->state |= _FW_LINKED;
++	_exit_critical_bh(&psta->lock, &irqL);
++	
++
++}
++
++static void update_hw_ht_param(_adapter *padapter)
++{
++	unsigned char		max_AMPDU_len;
++	unsigned char		min_MPDU_spacing;
++	struct registry_priv	 *pregpriv = &padapter->registrypriv;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	
++	DBG_871X("%s\n", __FUNCTION__);
++	
++
++	//handle A-MPDU parameter field
++	/* 	
++		AMPDU_para [1:0]:Max AMPDU Len => 0:8k , 1:16k, 2:32k, 3:64k
++		AMPDU_para [4:2]:Min MPDU Start Spacing	
++	*/
++	max_AMPDU_len = pmlmeinfo->HT_caps.u.HT_cap_element.AMPDU_para & 0x03;	
++	
++	min_MPDU_spacing = (pmlmeinfo->HT_caps.u.HT_cap_element.AMPDU_para & 0x1c) >> 2;	
++
++	rtw_hal_set_hwreg(padapter, HW_VAR_AMPDU_MIN_SPACE, (u8 *)(&min_MPDU_spacing));
++
++	rtw_hal_set_hwreg(padapter, HW_VAR_AMPDU_FACTOR, (u8 *)(&max_AMPDU_len));
++
++	//
++	// Config SM Power Save setting
++	//
++	pmlmeinfo->SM_PS = (pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info & 0x0C) >> 2;
++	if(pmlmeinfo->SM_PS == WLAN_HT_CAP_SM_PS_STATIC)
++	{
++		/*u8 i;
++		//update the MCS rates
++		for (i = 0; i < 16; i++)
++		{
++			pmlmeinfo->HT_caps.HT_cap_element.MCS_rate[i] &= MCS_rate_1R[i];
++		}*/
++		DBG_871X("%s(): WLAN_HT_CAP_SM_PS_STATIC\n",__FUNCTION__);
++	}
++
++	//
++	// Config current HT Protection mode.
++	//
++	//pmlmeinfo->HT_protection = pmlmeinfo->HT_info.infos[1] & 0x3;
++
++}
++
++static void start_bss_network(_adapter *padapter, u8 *pbuf)
++{
++	u8 *p;
++	u8 val8, cur_channel, cur_bwmode, cur_ch_offset;
++	u16 bcn_interval;
++	u32	acparm;	
++	int	ie_len;	
++	struct registry_priv	 *pregpriv = &padapter->registrypriv;
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct security_priv* psecuritypriv=&(padapter->securitypriv);	
++	WLAN_BSSID_EX *pnetwork = (WLAN_BSSID_EX *)&pmlmepriv->cur_network.network;
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	WLAN_BSSID_EX *pnetwork_mlmeext = &(pmlmeinfo->network);
++	struct HT_info_element *pht_info=NULL;
++#ifdef CONFIG_P2P
++	struct wifidirect_info	*pwdinfo = &(padapter->wdinfo);
++#endif //CONFIG_P2P
++	u8 cbw40_enable=0;
++	u8 change_band = _FALSE;
++	//DBG_871X("%s\n", __FUNCTION__);
++
++	bcn_interval = (u16)pnetwork->Configuration.BeaconPeriod;	
++	cur_channel = pnetwork->Configuration.DSConfig;
++	cur_bwmode = HT_CHANNEL_WIDTH_20;;
++	cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++	
++
++	//check if there is wps ie, 
++	//if there is wpsie in beacon, the hostapd will update beacon twice when stating hostapd,
++	//and at first time the security ie ( RSN/WPA IE) will not include in beacon.
++	if(NULL == rtw_get_wps_ie(pnetwork->IEs+_FIXED_IE_LENGTH_, pnetwork->IELength-_FIXED_IE_LENGTH_, NULL, NULL))
++	{
++		pmlmeext->bstart_bss = _TRUE;
++	}
++
++	//todo: update wmm, ht cap
++	//pmlmeinfo->WMM_enable;
++	//pmlmeinfo->HT_enable;
++	if(pmlmepriv->qospriv.qos_option)
++		pmlmeinfo->WMM_enable = _TRUE;
++
++	if(pmlmepriv->htpriv.ht_option)
++	{
++		pmlmeinfo->WMM_enable = _TRUE;
++		pmlmeinfo->HT_enable = _TRUE;
++		//pmlmeinfo->HT_info_enable = _TRUE;
++		//pmlmeinfo->HT_caps_enable = _TRUE;
++
++		update_hw_ht_param(padapter);
++	}
++	
++
++	if(pmlmepriv->cur_network.join_res != _TRUE) //setting only at  first time
++	{		
++		//WEP Key will be set before this function, do not clear CAM.
++		if ((psecuritypriv->dot11PrivacyAlgrthm != _WEP40_) && (psecuritypriv->dot11PrivacyAlgrthm != _WEP104_))
++			flush_all_cam_entry(padapter);	//clear CAM
++	}	
++
++	//set MSR to AP_Mode		
++	Set_MSR(padapter, _HW_STATE_AP_);	
++		
++	//Set BSSID REG
++	rtw_hal_set_hwreg(padapter, HW_VAR_BSSID, pnetwork->MacAddress);
++
++	//Set EDCA param reg
++#ifdef CONFIG_CONCURRENT_MODE
++	acparm = 0x005ea42b;
++#else
++	acparm = 0x002F3217; // VO
++#endif
++	rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_VO, (u8 *)(&acparm));
++	acparm = 0x005E4317; // VI
++	rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_VI, (u8 *)(&acparm));
++	//acparm = 0x00105320; // BE
++	acparm = 0x005ea42b;
++	rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_BE, (u8 *)(&acparm));
++	acparm = 0x0000A444; // BK
++	rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_BK, (u8 *)(&acparm));
++
++	//Set Security
++	val8 = (psecuritypriv->dot11AuthAlgrthm == dot11AuthAlgrthm_8021X)? 0xcc: 0xcf;
++	rtw_hal_set_hwreg(padapter, HW_VAR_SEC_CFG, (u8 *)(&val8));
++
++	//Beacon Control related register
++	rtw_hal_set_hwreg(padapter, HW_VAR_BEACON_INTERVAL, (u8 *)(&bcn_interval));
++
++	if(pmlmepriv->cur_network.join_res != _TRUE) //setting only at  first time
++	{
++		u32 initialgain;
++
++		initialgain = 0x1e;
++
++
++		//disable dynamic functions, such as high power, DIG
++		//Save_DM_Func_Flag(padapter);
++		//Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, _FALSE);
++		
++#ifdef CONFIG_CONCURRENT_MODE	
++		if(padapter->adapter_type > PRIMARY_ADAPTER)
++		{
++			if(rtw_buddy_adapter_up(padapter))
++			{
++				_adapter *pbuddy_adapter = padapter->pbuddy_adapter;
++
++				//turn on dynamic functions on PRIMARY_ADAPTER, dynamic functions only runs at PRIMARY_ADAPTER
++				Switch_DM_Func(pbuddy_adapter, DYNAMIC_FUNC_DIG|DYNAMIC_FUNC_HP|DYNAMIC_FUNC_SS, _TRUE);
++	
++				rtw_hal_set_hwreg(pbuddy_adapter, HW_VAR_INITIAL_GAIN, (u8 *)(&initialgain));
++			}
++		}
++		else
++#endif
++		{
++			//turn on dynamic functions	
++			Switch_DM_Func(padapter, DYNAMIC_FUNC_DIG|DYNAMIC_FUNC_HP|DYNAMIC_FUNC_SS, _TRUE);
++
++			rtw_hal_set_hwreg(padapter, HW_VAR_INITIAL_GAIN, (u8 *)(&initialgain));
++		}	
++	
++	}
++
++	//set channel, bwmode	
++	p = rtw_get_ie((pnetwork->IEs + sizeof(NDIS_802_11_FIXED_IEs)), _HT_ADD_INFO_IE_, &ie_len, (pnetwork->IELength - sizeof(NDIS_802_11_FIXED_IEs)));
++	if( p && ie_len)
++	{
++		pht_info = (struct HT_info_element *)(p+2);
++
++		if( pmlmeext->cur_channel > 14 )
++		{
++			if( pregpriv->cbw40_enable & BIT(1) )
++				cbw40_enable = 1;
++		}
++		else
++			if( pregpriv->cbw40_enable & BIT(0) )
++				cbw40_enable = 1;
++			
++		if ((cbw40_enable) &&	 (pht_info->infos[0] & BIT(2)))
++		{
++			//switch to the 40M Hz mode
++			//pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_40;
++			cur_bwmode = HT_CHANNEL_WIDTH_40;
++			switch (pht_info->infos[0] & 0x3)
++			{
++				case 1:
++					//pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_LOWER;
++					cur_ch_offset = HAL_PRIME_CHNL_OFFSET_LOWER;
++					break;
++			
++				case 3:
++					//pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_UPPER;
++					cur_ch_offset = HAL_PRIME_CHNL_OFFSET_UPPER;					
++					break;
++				
++				default:
++					//pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++					cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++					break;
++			}		
++						
++		}
++					
++	}
++
++#ifdef CONFIG_DUALMAC_CONCURRENT
++	dc_set_ap_channel_bandwidth(padapter, cur_channel, cur_ch_offset, cur_bwmode);
++#else
++	//TODO: need to judge the phy parameters on concurrent mode for single phy
++	//set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode);
++#ifdef CONFIG_CONCURRENT_MODE
++	if(!check_buddy_fwstate(padapter, _FW_LINKED|_FW_UNDER_LINKING|_FW_UNDER_SURVEY))
++	{
++		set_channel_bwmode(padapter, cur_channel, cur_ch_offset, cur_bwmode);
++	}
++	else if(check_buddy_fwstate(padapter, _FW_LINKED)==_TRUE)//only second adapter can enter AP Mode
++	{
++		_adapter *pbuddy_adapter = padapter->pbuddy_adapter;		
++		struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++	
++		//To sync cur_channel/cur_bwmode/cur_ch_offset with primary adapter
++		DBG_871X("primary iface is at linked state, sync cur_channel/cur_bwmode/cur_ch_offset\n");
++		DBG_871X("primary adapter, CH=%d, BW=%d, offset=%d\n", pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_bwmode, pbuddy_mlmeext->cur_ch_offset);
++		DBG_871X("second adapter, CH=%d, BW=%d, offset=%d\n", cur_channel, cur_bwmode, cur_ch_offset);
++		
++		if((cur_channel <= 14 && pbuddy_mlmeext->cur_channel >= 36) ||
++		(cur_channel >= 36 && pbuddy_mlmeext->cur_channel <= 14))
++			change_band = _TRUE;
++		
++		cur_channel = pbuddy_mlmeext->cur_channel;
++		if(cur_bwmode == HT_CHANNEL_WIDTH_40)
++		{
++			if(pht_info)
++				pht_info->infos[0] &= ~(BIT(0)|BIT(1));
++			
++			if(pbuddy_mlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40)
++			{
++				cur_ch_offset = pbuddy_mlmeext->cur_ch_offset;
++
++				//to update cur_ch_offset value in beacon
++				if(pht_info)
++				{				
++					switch(cur_ch_offset)
++					{
++						case HAL_PRIME_CHNL_OFFSET_LOWER:
++							pht_info->infos[0] |= 0x1;
++							break;
++						case HAL_PRIME_CHNL_OFFSET_UPPER:
++							pht_info->infos[0] |= 0x3;
++							break;
++						case HAL_PRIME_CHNL_OFFSET_DONT_CARE:							
++						default:							
++							break;					
++					}
++				}		
++				
++			}
++			else if(pbuddy_mlmeext->cur_bwmode == HT_CHANNEL_WIDTH_20)
++			{
++				cur_bwmode = HT_CHANNEL_WIDTH_20;
++				cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++			
++				if(cur_channel>0 && cur_channel<5)
++				{
++					if(pht_info)
++						pht_info->infos[0] |= 0x1;		
++
++					cur_bwmode = HT_CHANNEL_WIDTH_40;
++					cur_ch_offset = HAL_PRIME_CHNL_OFFSET_LOWER;
++				}
++
++				if(cur_channel>7 && cur_channel<(14+1))
++				{
++					if(pht_info)
++						pht_info->infos[0] |= 0x3;
++						
++					cur_bwmode = HT_CHANNEL_WIDTH_40;
++					cur_ch_offset = HAL_PRIME_CHNL_OFFSET_UPPER;
++				}					
++
++				set_channel_bwmode(padapter, cur_channel, cur_ch_offset, cur_bwmode);
++			}
++			
++		}
++
++		// to update channel value in beacon
++		pnetwork->Configuration.DSConfig = cur_channel;		
++		p = rtw_get_ie((pnetwork->IEs + sizeof(NDIS_802_11_FIXED_IEs)), _DSSET_IE_, &ie_len, (pnetwork->IELength - sizeof(NDIS_802_11_FIXED_IEs)));
++		if(p && ie_len>0)
++			*(p + 2) = cur_channel;
++		
++		if(pht_info)
++			pht_info->primary_channel = cur_channel;
++		
++		//set buddy adapter channel, bandwidth, offeset to current adapter
++		pmlmeext->cur_channel = cur_channel;	
++		pmlmeext->cur_bwmode = cur_bwmode;
++		pmlmeext->cur_ch_offset = cur_ch_offset;
++		
++		//buddy interface band is different from current interface, update ERP, support rate, ext support rate IE
++		if(change_band == _TRUE)
++			change_band_update_ie(padapter, pnetwork);
++	}
++#else
++	set_channel_bwmode(padapter, cur_channel, cur_ch_offset, cur_bwmode);
++#endif //CONFIG_CONCURRENT_MODE
++
++	DBG_871X("CH=%d, BW=%d, offset=%d\n", cur_channel, cur_bwmode, cur_ch_offset);
++
++	//
++	pmlmeext->cur_channel = cur_channel;	
++	pmlmeext->cur_bwmode = cur_bwmode;
++	pmlmeext->cur_ch_offset = cur_ch_offset;
++#endif //CONFIG_DUALMAC_CONCURRENT
++	pmlmeext->cur_wireless_mode = pmlmepriv->cur_network.network_type;
++
++	//update cur_wireless_mode
++	update_wireless_mode(padapter);
++
++	//update RRSR after set channel and bandwidth
++	UpdateBrateTbl(padapter, pnetwork->SupportedRates);
++	rtw_hal_set_hwreg(padapter, HW_VAR_BASIC_RATE, pnetwork->SupportedRates);
++
++	//udpate capability after cur_wireless_mode updated
++	update_capinfo(padapter, rtw_get_capability((WLAN_BSSID_EX *)pnetwork));
++	
++	//let pnetwork_mlmeext == pnetwork_mlme.
++	_rtw_memcpy(pnetwork_mlmeext, pnetwork, pnetwork->Length);
++
++#ifdef CONFIG_P2P
++	_rtw_memcpy(pwdinfo->p2p_group_ssid, pnetwork->Ssid.Ssid, pnetwork->Ssid.SsidLength);	
++	pwdinfo->p2p_group_ssid_len = pnetwork->Ssid.SsidLength;
++#endif //CONFIG_P2P
++
++	if(_TRUE == pmlmeext->bstart_bss)
++	{
++		update_beacon(padapter, _TIM_IE_, NULL, _FALSE);
++
++#ifndef CONFIG_INTERRUPT_BASED_TXBCN //other case will  tx beacon when bcn interrupt coming in.
++#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI)
++		//issue beacon frame
++		if(send_beacon(padapter)==_FAIL)
++		{
++			DBG_871X("issue_beacon, fail!\n");
++		}
++#endif 
++#endif //!CONFIG_INTERRUPT_BASED_TXBCN
++
++	}
++
++
++	//update bc/mc sta_info
++	update_bmc_sta(padapter);
++	
++	//pmlmeext->bstart_bss = _TRUE;
++	
++}
++
++int rtw_check_beacon_data(_adapter *padapter, u8 *pbuf,  int len)
++{
++	int ret=_SUCCESS;
++	u8 *p;
++	u8 *pHT_caps_ie=NULL;
++	u8 *pHT_info_ie=NULL;
++	struct sta_info *psta = NULL;
++	u16 cap, ht_cap=_FALSE;
++	uint ie_len = 0;
++	int group_cipher, pairwise_cipher;	
++	u8	channel, network_type, supportRate[NDIS_802_11_LENGTH_RATES_EX];
++	int supportRateNum = 0;
++	u8 OUI1[] = {0x00, 0x50, 0xf2,0x01};
++	u8 wps_oui[4]={0x0,0x50,0xf2,0x04};
++	u8 WMM_PARA_IE[] = {0x00, 0x50, 0xf2, 0x02, 0x01, 0x01};	
++	struct registry_priv *pregistrypriv = &padapter->registrypriv;	
++	struct security_priv *psecuritypriv = &padapter->securitypriv;
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	WLAN_BSSID_EX *pbss_network = (WLAN_BSSID_EX *)&pmlmepriv->cur_network.network;	
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	u8 *ie = pbss_network->IEs;
++	
++
++	/* SSID */
++	/* Supported rates */
++	/* DS Params */
++	/* WLAN_EID_COUNTRY */
++	/* ERP Information element */
++	/* Extended supported rates */
++	/* WPA/WPA2 */
++	/* Wi-Fi Wireless Multimedia Extensions */
++	/* ht_capab, ht_oper */
++	/* WPS IE */
++
++	DBG_871X("%s, len=%d\n", __FUNCTION__, len);
++
++	if(check_fwstate(pmlmepriv, WIFI_AP_STATE) != _TRUE)
++		return _FAIL;
++
++
++	if(len>MAX_IE_SZ)
++		return _FAIL;
++	
++	pbss_network->IELength = len;
++
++	_rtw_memset(ie, 0, MAX_IE_SZ);
++	
++	_rtw_memcpy(ie, pbuf, pbss_network->IELength);
++
++
++	if(pbss_network->InfrastructureMode!=Ndis802_11APMode)
++		return _FAIL;
++
++	pbss_network->Rssi = 0;
++
++	_rtw_memcpy(pbss_network->MacAddress, myid(&(padapter->eeprompriv)), ETH_ALEN);
++	
++	//beacon interval
++	p = rtw_get_beacon_interval_from_ie(ie);//ie + 8;	// 8: TimeStamp, 2: Beacon Interval 2:Capability
++	//pbss_network->Configuration.BeaconPeriod = le16_to_cpu(*(unsigned short*)p);
++	pbss_network->Configuration.BeaconPeriod = RTW_GET_LE16(p);
++	
++	//capability
++	//cap = *(unsigned short *)rtw_get_capability_from_ie(ie);
++	//cap = le16_to_cpu(cap);
++	cap = RTW_GET_LE16(ie);
++
++	//SSID
++	p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _SSID_IE_, &ie_len, (pbss_network->IELength -_BEACON_IE_OFFSET_));
++	if(p && ie_len>0)
++	{
++		_rtw_memset(&pbss_network->Ssid, 0, sizeof(NDIS_802_11_SSID));
++		_rtw_memcpy(pbss_network->Ssid.Ssid, (p + 2), ie_len);
++		pbss_network->Ssid.SsidLength = ie_len;
++	}	
++
++	//chnnel
++	channel = 0;
++	pbss_network->Configuration.Length = 0;
++	p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _DSSET_IE_, &ie_len, (pbss_network->IELength - _BEACON_IE_OFFSET_));
++	if(p && ie_len>0)
++		channel = *(p + 2);
++
++	pbss_network->Configuration.DSConfig = channel;
++
++	
++	_rtw_memset(supportRate, 0, NDIS_802_11_LENGTH_RATES_EX);
++	// get supported rates
++	p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _SUPPORTEDRATES_IE_, &ie_len, (pbss_network->IELength - _BEACON_IE_OFFSET_));	
++	if (p !=  NULL) 
++	{
++		_rtw_memcpy(supportRate, p+2, ie_len);	
++		supportRateNum = ie_len;
++	}
++	
++	//get ext_supported rates
++	p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _EXT_SUPPORTEDRATES_IE_, &ie_len, pbss_network->IELength - _BEACON_IE_OFFSET_);	
++	if (p !=  NULL)
++	{
++		_rtw_memcpy(supportRate+supportRateNum, p+2, ie_len);
++		supportRateNum += ie_len;
++	
++	}
++
++	network_type = rtw_check_network_type(supportRate, supportRateNum, channel);
++
++	rtw_set_supported_rate(pbss_network->SupportedRates, network_type);
++
++
++	//parsing ERP_IE
++	p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _ERPINFO_IE_, &ie_len, (pbss_network->IELength - _BEACON_IE_OFFSET_));
++	if(p && ie_len>0)
++	{
++		ERP_IE_handler(padapter, (PNDIS_802_11_VARIABLE_IEs)p);
++	}
++
++	//update privacy/security
++	if (cap & BIT(4))
++		pbss_network->Privacy = 1;
++	else
++		pbss_network->Privacy = 0;
++
++	psecuritypriv->wpa_psk = 0;
++
++	//wpa2
++	group_cipher = 0; pairwise_cipher = 0;
++	psecuritypriv->wpa2_group_cipher = _NO_PRIVACY_;
++	psecuritypriv->wpa2_pairwise_cipher = _NO_PRIVACY_;	
++	p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _RSN_IE_2_, &ie_len, (pbss_network->IELength - _BEACON_IE_OFFSET_));		
++	if(p && ie_len>0)
++	{
++		if(rtw_parse_wpa2_ie(p, ie_len+2, &group_cipher, &pairwise_cipher) == _SUCCESS)
++		{
++			psecuritypriv->dot11AuthAlgrthm= dot11AuthAlgrthm_8021X;
++			
++			psecuritypriv->dot8021xalg = 1;//psk,  todo:802.1x
++			psecuritypriv->wpa_psk |= BIT(1);
++
++			psecuritypriv->wpa2_group_cipher = group_cipher;
++			psecuritypriv->wpa2_pairwise_cipher = pairwise_cipher;
++#if 0
++			switch(group_cipher)
++			{
++				case WPA_CIPHER_NONE:				
++				psecuritypriv->wpa2_group_cipher = _NO_PRIVACY_;
++				break;
++				case WPA_CIPHER_WEP40:				
++				psecuritypriv->wpa2_group_cipher = _WEP40_;
++				break;
++				case WPA_CIPHER_TKIP:				
++				psecuritypriv->wpa2_group_cipher = _TKIP_;
++				break;
++				case WPA_CIPHER_CCMP:				
++				psecuritypriv->wpa2_group_cipher = _AES_;				
++				break;
++				case WPA_CIPHER_WEP104:					
++				psecuritypriv->wpa2_group_cipher = _WEP104_;
++				break;
++			}
++
++			switch(pairwise_cipher)
++			{
++				case WPA_CIPHER_NONE:			
++				psecuritypriv->wpa2_pairwise_cipher = _NO_PRIVACY_;
++				break;
++				case WPA_CIPHER_WEP40:			
++				psecuritypriv->wpa2_pairwise_cipher = _WEP40_;
++				break;
++				case WPA_CIPHER_TKIP:				
++				psecuritypriv->wpa2_pairwise_cipher = _TKIP_;
++				break;
++				case WPA_CIPHER_CCMP:			
++				psecuritypriv->wpa2_pairwise_cipher = _AES_;
++				break;
++				case WPA_CIPHER_WEP104:					
++				psecuritypriv->wpa2_pairwise_cipher = _WEP104_;
++				break;
++			}
++#endif			
++		}
++		
++	}
++
++	//wpa
++	ie_len = 0;
++	group_cipher = 0; pairwise_cipher = 0;
++	psecuritypriv->wpa_group_cipher = _NO_PRIVACY_;
++	psecuritypriv->wpa_pairwise_cipher = _NO_PRIVACY_;	
++	for (p = ie + _BEACON_IE_OFFSET_; ;p += (ie_len + 2))
++	{
++		p = rtw_get_ie(p, _SSN_IE_1_, &ie_len, (pbss_network->IELength - _BEACON_IE_OFFSET_ - (ie_len + 2)));		
++		if ((p) && (_rtw_memcmp(p+2, OUI1, 4)))
++		{
++			if(rtw_parse_wpa_ie(p, ie_len+2, &group_cipher, &pairwise_cipher) == _SUCCESS)
++			{
++				psecuritypriv->dot11AuthAlgrthm= dot11AuthAlgrthm_8021X;
++				
++				psecuritypriv->dot8021xalg = 1;//psk,  todo:802.1x
++
++				psecuritypriv->wpa_psk |= BIT(0);
++
++				psecuritypriv->wpa_group_cipher = group_cipher;
++				psecuritypriv->wpa_pairwise_cipher = pairwise_cipher;
++
++#if 0
++				switch(group_cipher)
++				{
++					case WPA_CIPHER_NONE:					
++					psecuritypriv->wpa_group_cipher = _NO_PRIVACY_;
++					break;
++					case WPA_CIPHER_WEP40:					
++					psecuritypriv->wpa_group_cipher = _WEP40_;
++					break;
++					case WPA_CIPHER_TKIP:					
++					psecuritypriv->wpa_group_cipher = _TKIP_;
++					break;
++					case WPA_CIPHER_CCMP:					
++					psecuritypriv->wpa_group_cipher = _AES_;				
++					break;
++					case WPA_CIPHER_WEP104:					
++					psecuritypriv->wpa_group_cipher = _WEP104_;
++					break;
++				}
++
++				switch(pairwise_cipher)
++				{
++					case WPA_CIPHER_NONE:					
++					psecuritypriv->wpa_pairwise_cipher = _NO_PRIVACY_;
++					break;
++					case WPA_CIPHER_WEP40:					
++					psecuritypriv->wpa_pairwise_cipher = _WEP40_;
++					break;
++					case WPA_CIPHER_TKIP:					
++					psecuritypriv->wpa_pairwise_cipher = _TKIP_;
++					break;
++					case WPA_CIPHER_CCMP:					
++					psecuritypriv->wpa_pairwise_cipher = _AES_;
++					break;
++					case WPA_CIPHER_WEP104:					
++					psecuritypriv->wpa_pairwise_cipher = _WEP104_;
++					break;
++				}
++#endif				
++			}
++
++			break;
++			
++		}
++			
++		if ((p == NULL) || (ie_len == 0))
++		{
++				break;
++		}
++		
++	}
++
++	//wmm
++	ie_len = 0;
++	pmlmepriv->qospriv.qos_option = 0;
++	if(pregistrypriv->wmm_enable)
++	{
++		for (p = ie + _BEACON_IE_OFFSET_; ;p += (ie_len + 2))
++		{			
++			p = rtw_get_ie(p, _VENDOR_SPECIFIC_IE_, &ie_len, (pbss_network->IELength - _BEACON_IE_OFFSET_ - (ie_len + 2)));	
++			if((p) && _rtw_memcmp(p+2, WMM_PARA_IE, 6)) 
++			{
++				pmlmepriv->qospriv.qos_option = 1;	
++
++				*(p+8) |= BIT(7);//QoS Info, support U-APSD
++				
++				/* disable all ACM bits since the WMM admission control is not supported */
++				*(p + 10) &= ~BIT(4); /* BE */
++				*(p + 14) &= ~BIT(4); /* BK */
++				*(p + 18) &= ~BIT(4); /* VI */
++				*(p + 22) &= ~BIT(4); /* VO */
++				
++				break;				
++			}
++			
++			if ((p == NULL) || (ie_len == 0))
++			{
++				break;
++			}			
++		}		
++	}
++
++	//parsing HT_CAP_IE
++	p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _HT_CAPABILITY_IE_, &ie_len, (pbss_network->IELength - _BEACON_IE_OFFSET_));
++	if(p && ie_len>0)
++	{
++		u8 rf_type;
++
++		struct rtw_ieee80211_ht_cap *pht_cap = (struct rtw_ieee80211_ht_cap *)(p+2);
++
++		pHT_caps_ie=p;
++		
++		
++		ht_cap = _TRUE;
++		network_type |= WIRELESS_11_24N;
++
++	
++		rtw_hal_get_hwreg(padapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type));
++
++		if((psecuritypriv->wpa_pairwise_cipher & WPA_CIPHER_CCMP) ||
++			(psecuritypriv->wpa2_pairwise_cipher & WPA_CIPHER_CCMP))
++		{
++			pht_cap->ampdu_params_info |= (IEEE80211_HT_CAP_AMPDU_DENSITY&(0x07<<2));
++		}	
++		else
++		{
++			pht_cap->ampdu_params_info |= (IEEE80211_HT_CAP_AMPDU_DENSITY&0x00);	
++		}	
++
++		pht_cap->ampdu_params_info |= (IEEE80211_HT_CAP_AMPDU_FACTOR & 0x03); //set  Max Rx AMPDU size  to 64K
++
++		if(rf_type == RF_1T1R)
++		{			
++			pht_cap->supp_mcs_set[0] = 0xff;
++			pht_cap->supp_mcs_set[1] = 0x0;				
++		}
++
++		_rtw_memcpy(&pmlmepriv->htpriv.ht_cap, p+2, ie_len);		
++		
++	}
++
++	//parsing HT_INFO_IE
++	p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _HT_ADD_INFO_IE_, &ie_len, (pbss_network->IELength - _BEACON_IE_OFFSET_));
++	if(p && ie_len>0)
++	{
++		pHT_info_ie=p;
++	}
++
++	switch(network_type)
++	{
++		case WIRELESS_11B:
++			pbss_network->NetworkTypeInUse = Ndis802_11DS;
++			break;	
++		case WIRELESS_11G:
++		case WIRELESS_11BG:
++             case WIRELESS_11G_24N:
++		case WIRELESS_11BG_24N:
++			pbss_network->NetworkTypeInUse = Ndis802_11OFDM24;
++			break;
++		case WIRELESS_11A:
++			pbss_network->NetworkTypeInUse = Ndis802_11OFDM5;
++			break;
++		default :
++			pbss_network->NetworkTypeInUse = Ndis802_11OFDM24;
++			break;
++	}
++	
++	pmlmepriv->cur_network.network_type = network_type;
++
++
++	pmlmepriv->htpriv.ht_option = _FALSE;
++#ifdef CONFIG_80211N_HT
++	if( (psecuritypriv->wpa2_pairwise_cipher&WPA_CIPHER_TKIP) ||
++		      (psecuritypriv->wpa_pairwise_cipher&WPA_CIPHER_TKIP))
++	{	
++		//todo:
++		//ht_cap = _FALSE;
++	}
++		      
++	//ht_cap	
++	if(pregistrypriv->ht_enable && ht_cap==_TRUE)
++	{		
++		pmlmepriv->htpriv.ht_option = _TRUE;
++		pmlmepriv->qospriv.qos_option = 1;
++
++		if(pregistrypriv->ampdu_enable==1)
++		{
++			pmlmepriv->htpriv.ampdu_enable = _TRUE;
++		}
++
++		HT_caps_handler(padapter, (PNDIS_802_11_VARIABLE_IEs)pHT_caps_ie);
++		
++		HT_info_handler(padapter, (PNDIS_802_11_VARIABLE_IEs)pHT_info_ie);
++	}
++#endif
++
++
++	pbss_network->Length = get_WLAN_BSSID_EX_sz((WLAN_BSSID_EX  *)pbss_network);
++
++	//issue beacon to start bss network
++	start_bss_network(padapter, (u8*)pbss_network);
++			
++
++	//alloc sta_info for ap itself
++	psta = rtw_get_stainfo(&padapter->stapriv, pbss_network->MacAddress);
++	if(!psta)
++	{
++		psta = rtw_alloc_stainfo(&padapter->stapriv, pbss_network->MacAddress);
++		if (psta == NULL) 
++		{ 
++			return _FAIL;
++		}	
++	}	
++	psta->state |= WIFI_AP_STATE;		//Aries, add,fix bug of flush_cam_entry at STOP AP mode , 0724 	
++	rtw_indicate_connect( padapter);
++
++	pmlmepriv->cur_network.join_res = _TRUE;//for check if already set beacon
++		
++	//update bc/mc sta_info
++	//update_bmc_sta(padapter);
++
++	return ret;
++
++}
++
++void rtw_set_macaddr_acl(_adapter *padapter, int mode)
++{
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	struct wlan_acl_pool *pacl_list = &pstapriv->acl_list;
++
++	DBG_871X("%s, mode=%d\n", __func__, mode);
++
++	pacl_list->mode = mode;
++}
++
++int rtw_acl_add_sta(_adapter *padapter, u8 *addr)
++{
++	_irqL irqL;
++	_list	*plist, *phead;
++	u8 added = _FALSE;
++	int i, ret=0;
++	struct rtw_wlan_acl_node *paclnode;
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	struct wlan_acl_pool *pacl_list = &pstapriv->acl_list;
++	_queue	*pacl_node_q =&pacl_list->acl_node_q;	
++
++	DBG_871X("%s(acl_num=%d)=" MAC_FMT "\n", __func__, pacl_list->num, MAC_ARG(addr));	
++
++	if((NUM_ACL-1) < pacl_list->num)
++		return (-1);	
++
++
++	_enter_critical_bh(&(pacl_node_q->lock), &irqL);
++
++	phead = get_list_head(pacl_node_q);
++	plist = get_next(phead);
++		
++	while ((rtw_end_of_queue_search(phead, plist)) == _FALSE)
++	{
++		paclnode = LIST_CONTAINOR(plist, struct rtw_wlan_acl_node, list);
++		plist = get_next(plist);
++
++		if(_rtw_memcmp(paclnode->addr, addr, ETH_ALEN))
++		{
++			if(paclnode->valid == _TRUE)
++			{
++				added = _TRUE;
++				DBG_871X("%s, sta has been added\n", __func__);
++				break;
++			}
++		}		
++	}
++	
++	_exit_critical_bh(&(pacl_node_q->lock), &irqL);
++
++
++	if(added == _TRUE)
++		return ret;
++	
++
++	_enter_critical_bh(&(pacl_node_q->lock), &irqL);
++
++	for(i=0; i< NUM_ACL; i++)
++	{
++		paclnode = &pacl_list->aclnode[i];
++
++		if(paclnode->valid == _FALSE)
++		{
++			_rtw_init_listhead(&paclnode->list);
++	
++			_rtw_memcpy(paclnode->addr, addr, ETH_ALEN);
++		
++			paclnode->valid = _TRUE;
++
++			rtw_list_insert_tail(&paclnode->list, get_list_head(pacl_node_q));
++	
++			pacl_list->num++;
++
++			break;
++		}
++	}
++
++	DBG_871X("%s, acl_num=%d\n", __func__, pacl_list->num);
++	
++	_exit_critical_bh(&(pacl_node_q->lock), &irqL);
++
++	return ret;
++}
++
++int rtw_acl_remove_sta(_adapter *padapter, u8 *addr)
++{
++	_irqL irqL;
++	_list	*plist, *phead;
++	int i, ret=0;
++	struct rtw_wlan_acl_node *paclnode;
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	struct wlan_acl_pool *pacl_list = &pstapriv->acl_list;
++	_queue	*pacl_node_q =&pacl_list->acl_node_q;	
++
++	DBG_871X("%s(acl_num=%d)=" MAC_FMT "\n", __func__, pacl_list->num, MAC_ARG(addr));	
++
++	_enter_critical_bh(&(pacl_node_q->lock), &irqL);
++
++	phead = get_list_head(pacl_node_q);
++	plist = get_next(phead);
++		
++	while ((rtw_end_of_queue_search(phead, plist)) == _FALSE)
++	{
++		paclnode = LIST_CONTAINOR(plist, struct rtw_wlan_acl_node, list);
++		plist = get_next(plist);
++
++		if(_rtw_memcmp(paclnode->addr, addr, ETH_ALEN))
++		{
++			if(paclnode->valid == _TRUE)
++			{
++				paclnode->valid = _FALSE;
++
++				rtw_list_delete(&paclnode->list);
++				
++				pacl_list->num--;
++			}
++		}		
++	}
++	
++	_exit_critical_bh(&(pacl_node_q->lock), &irqL);
++
++	DBG_871X("%s, acl_num=%d\n", __func__, pacl_list->num);
++	
++	return ret;
++
++}
++
++#ifdef CONFIG_NATIVEAP_MLME
++
++static void update_bcn_fixed_ie(_adapter *padapter)
++{
++	DBG_871X("%s\n", __FUNCTION__);
++
++}
++
++static void update_bcn_erpinfo_ie(_adapter *padapter)
++{
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	WLAN_BSSID_EX *pnetwork = &(pmlmeinfo->network);
++	unsigned char *p, *ie = pnetwork->IEs;
++	u32 len = 0;
++
++	DBG_871X("%s, ERP_enable=%d\n", __FUNCTION__, pmlmeinfo->ERP_enable);
++
++	if(!pmlmeinfo->ERP_enable)
++		return;
++
++	//parsing ERP_IE
++	p = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _ERPINFO_IE_, &len, (pnetwork->IELength - _BEACON_IE_OFFSET_));
++	if(p && len>0)
++	{
++		PNDIS_802_11_VARIABLE_IEs pIE = (PNDIS_802_11_VARIABLE_IEs)p;
++
++		if (pmlmepriv->num_sta_non_erp == 1)
++			pIE->data[0] |= RTW_ERP_INFO_NON_ERP_PRESENT|RTW_ERP_INFO_USE_PROTECTION;
++		else
++			pIE->data[0] &= ~(RTW_ERP_INFO_NON_ERP_PRESENT|RTW_ERP_INFO_USE_PROTECTION);
++
++		if(pmlmepriv->num_sta_no_short_preamble > 0)
++			pIE->data[0] |= RTW_ERP_INFO_BARKER_PREAMBLE_MODE;
++		else
++			pIE->data[0] &= ~(RTW_ERP_INFO_BARKER_PREAMBLE_MODE);
++	
++		ERP_IE_handler(padapter, pIE);
++	}
++	
++}
++
++static void update_bcn_htcap_ie(_adapter *padapter)
++{
++	DBG_871X("%s\n", __FUNCTION__);
++
++}
++
++static void update_bcn_htinfo_ie(_adapter *padapter)
++{	
++	DBG_871X("%s\n", __FUNCTION__);
++
++}
++
++static void update_bcn_rsn_ie(_adapter *padapter)
++{
++	DBG_871X("%s\n", __FUNCTION__);
++
++}
++
++static void update_bcn_wpa_ie(_adapter *padapter)
++{
++	DBG_871X("%s\n", __FUNCTION__);
++
++}
++
++static void update_bcn_wmm_ie(_adapter *padapter)
++{
++	DBG_871X("%s\n", __FUNCTION__);
++	
++}
++
++static void update_bcn_wps_ie(_adapter *padapter)
++{
++	u8 *pwps_ie=NULL, *pwps_ie_src, *premainder_ie, *pbackup_remainder_ie=NULL;
++	uint wps_ielen=0, wps_offset, remainder_ielen;
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	WLAN_BSSID_EX *pnetwork = &(pmlmeinfo->network);
++	unsigned char *ie = pnetwork->IEs;
++	u32 ielen = pnetwork->IELength;
++
++
++	DBG_871X("%s\n", __FUNCTION__);
++
++	pwps_ie = rtw_get_wps_ie(ie+_FIXED_IE_LENGTH_, ielen-_FIXED_IE_LENGTH_, NULL, &wps_ielen);
++	
++	if(pwps_ie==NULL || wps_ielen==0)
++		return;
++
++	wps_offset = (uint)(pwps_ie-ie);
++
++	premainder_ie = pwps_ie + wps_ielen;
++
++	remainder_ielen = ielen - wps_offset - wps_ielen;
++
++	if(remainder_ielen>0)
++	{
++		pbackup_remainder_ie = rtw_malloc(remainder_ielen);
++		if(pbackup_remainder_ie)
++			_rtw_memcpy(pbackup_remainder_ie, premainder_ie, remainder_ielen);
++	}
++
++	
++	pwps_ie_src = pmlmepriv->wps_beacon_ie;
++	if(pwps_ie_src == NULL)
++		return;
++
++
++	wps_ielen = (uint)pwps_ie_src[1];//to get ie data len
++	if((wps_offset+wps_ielen+2+remainder_ielen)<=MAX_IE_SZ)
++	{
++		_rtw_memcpy(pwps_ie, pwps_ie_src, wps_ielen+2);
++		pwps_ie += (wps_ielen+2);
++
++		if(pbackup_remainder_ie)
++			_rtw_memcpy(pwps_ie, pbackup_remainder_ie, remainder_ielen);
++
++		//update IELength
++		pnetwork->IELength = wps_offset + (wps_ielen+2) + remainder_ielen;
++	}
++
++	if(pbackup_remainder_ie)
++		rtw_mfree(pbackup_remainder_ie, remainder_ielen);
++
++}
++
++static void update_bcn_p2p_ie(_adapter *padapter)
++{
++
++}
++
++static void update_bcn_vendor_spec_ie(_adapter *padapter, u8*oui)
++{
++	DBG_871X("%s\n", __FUNCTION__);
++
++	if(_rtw_memcmp(RTW_WPA_OUI, oui, 4))
++	{
++		update_bcn_wpa_ie(padapter);
++	}
++	else if(_rtw_memcmp(WMM_OUI, oui, 4))
++	{
++		update_bcn_wmm_ie(padapter);
++	}
++	else if(_rtw_memcmp(WPS_OUI, oui, 4))
++	{
++		update_bcn_wps_ie(padapter);
++	}
++	else if(_rtw_memcmp(P2P_OUI, oui, 4))
++	{
++		update_bcn_p2p_ie(padapter);
++	}
++	else
++	{
++		DBG_871X("unknown OUI type!\n");
++ 	}
++	
++	
++}
++
++void update_beacon(_adapter *padapter, u8 ie_id, u8 *oui, u8 tx)
++{
++	_irqL irqL;
++	struct mlme_priv *pmlmepriv;
++	struct mlme_ext_priv	*pmlmeext;
++	//struct mlme_ext_info	*pmlmeinfo;
++	
++	//DBG_871X("%s\n", __FUNCTION__);
++
++	if(!padapter)
++		return;
++
++	pmlmepriv = &(padapter->mlmepriv);
++	pmlmeext = &(padapter->mlmeextpriv);
++	//pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	if(_FALSE == pmlmeext->bstart_bss)
++		return;
++
++	_enter_critical_bh(&pmlmepriv->bcn_update_lock, &irqL);
++
++	switch(ie_id)
++	{
++		case 0xFF:
++
++			update_bcn_fixed_ie(padapter);//8: TimeStamp, 2: Beacon Interval 2:Capability
++			
++			break;
++
++		case _TIM_IE_:
++			
++			update_BCNTIM(padapter);
++			
++			break;
++
++		case _ERPINFO_IE_:
++
++			update_bcn_erpinfo_ie(padapter);
++
++			break;
++
++		case _HT_CAPABILITY_IE_:
++
++			update_bcn_htcap_ie(padapter);
++			
++			break;
++
++		case _RSN_IE_2_:
++
++			update_bcn_rsn_ie(padapter);
++
++			break;
++			
++		case _HT_ADD_INFO_IE_:
++
++			update_bcn_htinfo_ie(padapter);
++			
++			break;
++	
++		case _VENDOR_SPECIFIC_IE_:
++
++			update_bcn_vendor_spec_ie(padapter, oui);
++			
++			break;
++			
++		default:
++			break;
++	}
++
++	pmlmepriv->update_bcn = _TRUE;
++	
++	_exit_critical_bh(&pmlmepriv->bcn_update_lock, &irqL);		
++	
++#ifndef CONFIG_INTERRUPT_BASED_TXBCN 
++#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI)
++	if(tx)
++	{
++		//send_beacon(padapter);//send_beacon must execute on TSR level
++		set_tx_beacon_cmd(padapter);
++	}
++#else
++	{	
++		//PCI will issue beacon when BCN interrupt occurs.		
++	}
++#endif
++#endif //!CONFIG_INTERRUPT_BASED_TXBCN
++	
++}
++
++#ifdef CONFIG_80211N_HT
++
++/*
++op_mode
++Set to 0 (HT pure) under the followign conditions
++	- all STAs in the BSS are 20/40 MHz HT in 20/40 MHz BSS or
++	- all STAs in the BSS are 20 MHz HT in 20 MHz BSS
++Set to 1 (HT non-member protection) if there may be non-HT STAs
++	in both the primary and the secondary channel
++Set to 2 if only HT STAs are associated in BSS,
++	however and at least one 20 MHz HT STA is associated
++Set to 3 (HT mixed mode) when one or more non-HT STAs are associated
++	(currently non-GF HT station is considered as non-HT STA also)
++*/
++static int rtw_ht_operation_update(_adapter *padapter)
++{
++	u16 cur_op_mode, new_op_mode;
++	int op_mode_changes = 0;
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct ht_priv	*phtpriv_ap = &pmlmepriv->htpriv;
++
++	if(pmlmepriv->htpriv.ht_option == _TRUE) 
++		return 0;
++	
++	//if (!iface->conf->ieee80211n || iface->conf->ht_op_mode_fixed)
++	//	return 0;
++
++	DBG_871X("%s current operation mode=0x%X\n",
++		   __FUNCTION__, pmlmepriv->ht_op_mode);
++
++	if (!(pmlmepriv->ht_op_mode & HT_INFO_OPERATION_MODE_NON_GF_DEVS_PRESENT)
++	    && pmlmepriv->num_sta_ht_no_gf) {
++		pmlmepriv->ht_op_mode |=
++			HT_INFO_OPERATION_MODE_NON_GF_DEVS_PRESENT;
++		op_mode_changes++;
++	} else if ((pmlmepriv->ht_op_mode &
++		    HT_INFO_OPERATION_MODE_NON_GF_DEVS_PRESENT) &&
++		   pmlmepriv->num_sta_ht_no_gf == 0) {
++		pmlmepriv->ht_op_mode &=
++			~HT_INFO_OPERATION_MODE_NON_GF_DEVS_PRESENT;
++		op_mode_changes++;
++	}
++
++	if (!(pmlmepriv->ht_op_mode & HT_INFO_OPERATION_MODE_NON_HT_STA_PRESENT) &&
++	    (pmlmepriv->num_sta_no_ht || pmlmepriv->olbc_ht)) {
++		pmlmepriv->ht_op_mode |= HT_INFO_OPERATION_MODE_NON_HT_STA_PRESENT;
++		op_mode_changes++;
++	} else if ((pmlmepriv->ht_op_mode &
++		    HT_INFO_OPERATION_MODE_NON_HT_STA_PRESENT) &&
++		   (pmlmepriv->num_sta_no_ht == 0 && !pmlmepriv->olbc_ht)) {
++		pmlmepriv->ht_op_mode &=
++			~HT_INFO_OPERATION_MODE_NON_HT_STA_PRESENT;
++		op_mode_changes++;
++	}
++
++	/* Note: currently we switch to the MIXED op mode if HT non-greenfield
++	 * station is associated. Probably it's a theoretical case, since
++	 * it looks like all known HT STAs support greenfield.
++	 */
++	new_op_mode = 0;
++	if (pmlmepriv->num_sta_no_ht ||
++	    (pmlmepriv->ht_op_mode & HT_INFO_OPERATION_MODE_NON_GF_DEVS_PRESENT))
++		new_op_mode = OP_MODE_MIXED;
++	else if ((phtpriv_ap->ht_cap.cap_info & IEEE80211_HT_CAP_SUP_WIDTH)
++		 && pmlmepriv->num_sta_ht_20mhz)
++		new_op_mode = OP_MODE_20MHZ_HT_STA_ASSOCED;
++	else if (pmlmepriv->olbc_ht)
++		new_op_mode = OP_MODE_MAY_BE_LEGACY_STAS;
++	else
++		new_op_mode = OP_MODE_PURE;
++
++	cur_op_mode = pmlmepriv->ht_op_mode & HT_INFO_OPERATION_MODE_OP_MODE_MASK;
++	if (cur_op_mode != new_op_mode) {
++		pmlmepriv->ht_op_mode &= ~HT_INFO_OPERATION_MODE_OP_MODE_MASK;
++		pmlmepriv->ht_op_mode |= new_op_mode;
++		op_mode_changes++;
++	}
++
++	DBG_871X("%s new operation mode=0x%X changes=%d\n",
++		   __FUNCTION__, pmlmepriv->ht_op_mode, op_mode_changes);
++
++	return op_mode_changes;
++	
++}
++
++#endif /* CONFIG_80211N_HT */
++
++void associated_clients_update(_adapter *padapter, u8 updated)
++{
++	//update associcated stations cap.
++	if(updated == _TRUE)
++	{
++		_irqL irqL;
++		_list	*phead, *plist;
++		struct sta_info *psta=NULL;	
++		struct sta_priv *pstapriv = &padapter->stapriv;
++			
++		_enter_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++		
++		phead = &pstapriv->asoc_list;
++		plist = get_next(phead);
++		
++		//check asoc_queue
++		while ((rtw_end_of_queue_search(phead, plist)) == _FALSE)	
++		{
++			psta = LIST_CONTAINOR(plist, struct sta_info, asoc_list);
++		
++			plist = get_next(plist);
++
++			VCS_update(padapter, psta);		
++		}
++
++		_exit_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++
++	}		
++
++}
++
++/* called > TSR LEVEL for USB or SDIO Interface*/
++void bss_cap_update_on_sta_join(_adapter *padapter, struct sta_info *psta)
++{
++	u8 beacon_updated = _FALSE;
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv);
++
++	
++#if 0
++	if (!(psta->capability & WLAN_CAPABILITY_SHORT_PREAMBLE) &&
++	    !psta->no_short_preamble_set) {
++		psta->no_short_preamble_set = 1;
++		pmlmepriv->num_sta_no_short_preamble++;
++		if ((pmlmeext->cur_wireless_mode > WIRELESS_11B) && 
++		     (pmlmepriv->num_sta_no_short_preamble == 1))
++			ieee802_11_set_beacons(hapd->iface);
++	}
++#endif
++
++
++	if(!(psta->flags & WLAN_STA_SHORT_PREAMBLE))	
++	{
++		if(!psta->no_short_preamble_set)
++		{
++			psta->no_short_preamble_set = 1;
++			
++			pmlmepriv->num_sta_no_short_preamble++;
++			
++			if ((pmlmeext->cur_wireless_mode > WIRELESS_11B) && 
++		     		(pmlmepriv->num_sta_no_short_preamble == 1))
++			{
++				beacon_updated = _TRUE;
++				update_beacon(padapter, 0xFF, NULL, _TRUE);
++			}	
++			
++		}
++	}
++	else
++	{
++		if(psta->no_short_preamble_set)
++		{
++			psta->no_short_preamble_set = 0;
++			
++			pmlmepriv->num_sta_no_short_preamble--;
++			
++			if ((pmlmeext->cur_wireless_mode > WIRELESS_11B) && 
++		     		(pmlmepriv->num_sta_no_short_preamble == 0))
++			{
++				beacon_updated = _TRUE;
++				update_beacon(padapter, 0xFF, NULL, _TRUE);
++			}	
++			
++		}
++	}
++
++#if 0
++	if (psta->flags & WLAN_STA_NONERP && !psta->nonerp_set) {
++		psta->nonerp_set = 1;
++		pmlmepriv->num_sta_non_erp++;
++		if (pmlmepriv->num_sta_non_erp == 1)
++			ieee802_11_set_beacons(hapd->iface);
++	}
++#endif
++
++	if(psta->flags & WLAN_STA_NONERP)
++	{
++		if(!psta->nonerp_set)
++		{
++			psta->nonerp_set = 1;
++			
++			pmlmepriv->num_sta_non_erp++;
++			
++			if (pmlmepriv->num_sta_non_erp == 1)
++			{
++				beacon_updated = _TRUE;
++				update_beacon(padapter, _ERPINFO_IE_, NULL, _TRUE);
++			}	
++		}
++		
++	}
++	else
++	{
++		if(psta->nonerp_set)
++		{
++			psta->nonerp_set = 0;
++			
++			pmlmepriv->num_sta_non_erp--;
++			
++			if (pmlmepriv->num_sta_non_erp == 0)
++			{
++				beacon_updated = _TRUE;
++				update_beacon(padapter, _ERPINFO_IE_, NULL, _TRUE);
++			}	
++		}
++		
++	}
++
++
++#if 0
++	if (!(psta->capability & WLAN_CAPABILITY_SHORT_SLOT) &&
++	    !psta->no_short_slot_time_set) {
++		psta->no_short_slot_time_set = 1;
++		pmlmepriv->num_sta_no_short_slot_time++;
++		if ((pmlmeext->cur_wireless_mode > WIRELESS_11B) &&
++		    (pmlmepriv->num_sta_no_short_slot_time == 1))
++			ieee802_11_set_beacons(hapd->iface);
++	}
++#endif
++
++	if(!(psta->capability & WLAN_CAPABILITY_SHORT_SLOT))
++	{
++		if(!psta->no_short_slot_time_set)
++		{
++			psta->no_short_slot_time_set = 1;
++			
++			pmlmepriv->num_sta_no_short_slot_time++;
++			
++			if ((pmlmeext->cur_wireless_mode > WIRELESS_11B) &&
++		   		 (pmlmepriv->num_sta_no_short_slot_time == 1))
++			{
++				beacon_updated = _TRUE;
++				update_beacon(padapter, 0xFF, NULL, _TRUE);
++			}			
++			
++		}
++	}
++	else
++	{
++		if(psta->no_short_slot_time_set)
++		{
++			psta->no_short_slot_time_set = 0;
++			
++			pmlmepriv->num_sta_no_short_slot_time--;
++			
++			if ((pmlmeext->cur_wireless_mode > WIRELESS_11B) &&
++		   		 (pmlmepriv->num_sta_no_short_slot_time == 0))
++			{
++				beacon_updated = _TRUE;
++				update_beacon(padapter, 0xFF, NULL, _TRUE);
++			}			
++		}
++	}
++	
++#ifdef CONFIG_80211N_HT
++
++	if (psta->flags & WLAN_STA_HT) 
++	{
++		u16 ht_capab = le16_to_cpu(psta->htpriv.ht_cap.cap_info);
++			
++		DBG_871X("HT: STA " MAC_FMT " HT Capabilities "
++			   "Info: 0x%04x\n", MAC_ARG(psta->hwaddr), ht_capab);
++
++		if (psta->no_ht_set) {
++			psta->no_ht_set = 0;
++			pmlmepriv->num_sta_no_ht--;
++		}
++		
++		if ((ht_capab & IEEE80211_HT_CAP_GRN_FLD) == 0) {
++			if (!psta->no_ht_gf_set) {
++				psta->no_ht_gf_set = 1;
++				pmlmepriv->num_sta_ht_no_gf++;
++			}
++			DBG_871X("%s STA " MAC_FMT " - no "
++				   "greenfield, num of non-gf stations %d\n",
++				   __FUNCTION__, MAC_ARG(psta->hwaddr),
++				   pmlmepriv->num_sta_ht_no_gf);
++		}
++		
++		if ((ht_capab & IEEE80211_HT_CAP_SUP_WIDTH) == 0) {
++			if (!psta->ht_20mhz_set) {
++				psta->ht_20mhz_set = 1;
++				pmlmepriv->num_sta_ht_20mhz++;
++			}
++			DBG_871X("%s STA " MAC_FMT " - 20 MHz HT, "
++				   "num of 20MHz HT STAs %d\n",
++				   __FUNCTION__, MAC_ARG(psta->hwaddr),
++				   pmlmepriv->num_sta_ht_20mhz);
++		}
++		
++	} 
++	else 
++	{
++		if (!psta->no_ht_set) {
++			psta->no_ht_set = 1;
++			pmlmepriv->num_sta_no_ht++;
++		}
++		if(pmlmepriv->htpriv.ht_option == _TRUE) {		
++			DBG_871X("%s STA " MAC_FMT
++				   " - no HT, num of non-HT stations %d\n",
++				   __FUNCTION__, MAC_ARG(psta->hwaddr),
++				   pmlmepriv->num_sta_no_ht);
++		}
++	}
++
++	if (rtw_ht_operation_update(padapter) > 0)
++	{
++		update_beacon(padapter, _HT_CAPABILITY_IE_, NULL, _FALSE);
++		update_beacon(padapter, _HT_ADD_INFO_IE_, NULL, _TRUE);
++	}	
++	
++#endif /* CONFIG_80211N_HT */
++
++	//update associcated stations cap.
++	associated_clients_update(padapter,  beacon_updated);
++
++	DBG_871X("%s, updated=%d\n", __func__, beacon_updated);
++
++}
++
++u8 bss_cap_update_on_sta_leave(_adapter *padapter, struct sta_info *psta)
++{
++	u8 beacon_updated = _FALSE;
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv);
++
++	if(!psta)
++		return beacon_updated;
++
++	if (psta->no_short_preamble_set) {
++		psta->no_short_preamble_set = 0;
++		pmlmepriv->num_sta_no_short_preamble--;
++		if (pmlmeext->cur_wireless_mode > WIRELESS_11B
++		    && pmlmepriv->num_sta_no_short_preamble == 0)
++		{
++			beacon_updated = _TRUE;
++			update_beacon(padapter, 0xFF, NULL, _TRUE);
++		}	
++	}	
++
++	if (psta->nonerp_set) {
++		psta->nonerp_set = 0;		
++		pmlmepriv->num_sta_non_erp--;
++		if (pmlmepriv->num_sta_non_erp == 0)
++		{
++			beacon_updated = _TRUE;
++			update_beacon(padapter, _ERPINFO_IE_, NULL, _TRUE);
++		}	
++	}
++
++	if (psta->no_short_slot_time_set) {
++		psta->no_short_slot_time_set = 0;
++		pmlmepriv->num_sta_no_short_slot_time--;
++		if (pmlmeext->cur_wireless_mode > WIRELESS_11B
++		    && pmlmepriv->num_sta_no_short_slot_time == 0)
++		{
++			beacon_updated = _TRUE;
++			update_beacon(padapter, 0xFF, NULL, _TRUE);
++		}	
++	}
++	
++#ifdef CONFIG_80211N_HT
++
++	if (psta->no_ht_gf_set) {
++		psta->no_ht_gf_set = 0;
++		pmlmepriv->num_sta_ht_no_gf--;
++	}
++
++	if (psta->no_ht_set) {
++		psta->no_ht_set = 0;
++		pmlmepriv->num_sta_no_ht--;
++	}
++
++	if (psta->ht_20mhz_set) {
++		psta->ht_20mhz_set = 0;
++		pmlmepriv->num_sta_ht_20mhz--;
++	}
++
++	if (rtw_ht_operation_update(padapter) > 0)
++	{
++		update_beacon(padapter, _HT_CAPABILITY_IE_, NULL, _FALSE);
++		update_beacon(padapter, _HT_ADD_INFO_IE_, NULL, _TRUE);
++	}
++	
++#endif /* CONFIG_80211N_HT */
++
++	//update associcated stations cap.
++	//associated_clients_update(padapter,  beacon_updated); //move it to avoid deadlock
++
++	DBG_871X("%s, updated=%d\n", __func__, beacon_updated);
++
++	return beacon_updated;
++
++}
++
++u8 ap_free_sta(_adapter *padapter, struct sta_info *psta, bool active, u16 reason)
++{
++	_irqL irqL;
++	u8 beacon_updated = _FALSE;
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct sta_priv *pstapriv = &padapter->stapriv;
++
++	if(!psta)
++		return beacon_updated;
++
++	if (active == _TRUE)
++	{
++#ifdef CONFIG_80211N_HT
++		//tear down Rx AMPDU
++		send_delba(padapter, 0, psta->hwaddr);// recipient
++	
++		//tear down TX AMPDU
++		send_delba(padapter, 1, psta->hwaddr);// // originator
++		
++#endif //CONFIG_80211N_HT
++
++		issue_deauth(padapter, psta->hwaddr, reason);
++	}
++
++	psta->htpriv.agg_enable_bitmap = 0x0;//reset
++	psta->htpriv.candidate_tid_bitmap = 0x0;//reset
++
++
++	//report_del_sta_event(padapter, psta->hwaddr, reason);
++
++	//clear cam entry / key
++	//clear_cam_entry(padapter, (psta->mac_id + 3));
++	rtw_clearstakey_cmd(padapter, (u8*)psta, (u8)(psta->mac_id + 3), _TRUE);
++
++
++	_enter_critical_bh(&psta->lock, &irqL);
++	psta->state &= ~_FW_LINKED;
++	_exit_critical_bh(&psta->lock, &irqL);
++
++	#ifdef CONFIG_IOCTL_CFG80211
++	if (1) {
++		#ifdef COMPAT_KERNEL_RELEASE
++		rtw_cfg80211_indicate_sta_disassoc(padapter, psta->hwaddr, reason);
++		#elif (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) && !defined(CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER)
++		rtw_cfg80211_indicate_sta_disassoc(padapter, psta->hwaddr, reason);
++		#else //(LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) && !defined(CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER)
++		/* will call rtw_cfg80211_indicate_sta_disassoc() in cmd_thread for old API context */
++		#endif //(LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) && !defined(CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER)
++	} else
++	#endif //CONFIG_IOCTL_CFG80211
++	{
++		rtw_indicate_sta_disassoc_event(padapter, psta);
++	}
++
++	report_del_sta_event(padapter, psta->hwaddr, reason);
++
++	beacon_updated = bss_cap_update_on_sta_leave(padapter, psta);
++
++	_enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL);					
++	rtw_free_stainfo(padapter, psta);
++	_exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL);
++	
++
++	return beacon_updated;
++
++}
++
++int rtw_ap_inform_ch_switch(_adapter *padapter, u8 new_ch, u8 ch_offset)
++{
++	_irqL irqL;
++	_list	*phead, *plist;
++	int ret=0;	
++	struct sta_info *psta = NULL;	
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	u8 bc_addr[ETH_ALEN] = {0xff,0xff,0xff,0xff,0xff,0xff};
++
++	if((pmlmeinfo->state&0x03) != WIFI_FW_AP_STATE)
++		return ret;
++
++	DBG_871X(FUNC_NDEV_FMT" with ch:%u, offset:%u\n",
++		FUNC_NDEV_ARG(padapter->pnetdev), new_ch, ch_offset);
++
++	_enter_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++	phead = &pstapriv->asoc_list;
++	plist = get_next(phead);
++	
++	/* for each sta in asoc_queue */
++	while ((rtw_end_of_queue_search(phead, plist)) == _FALSE)	
++	{		
++		psta = LIST_CONTAINOR(plist, struct sta_info, asoc_list);
++		plist = get_next(plist);
++
++		issue_action_spct_ch_switch(padapter, psta->hwaddr, new_ch, ch_offset);
++		psta->expire_to = ((pstapriv->expire_to * 2) > 5) ? 5 : (pstapriv->expire_to * 2);
++	}
++	_exit_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++
++	issue_action_spct_ch_switch(padapter, bc_addr, new_ch, ch_offset);
++
++	return ret;
++}
++
++int rtw_sta_flush(_adapter *padapter)
++{
++	_irqL irqL;
++	_list	*phead, *plist;
++	int ret=0;	
++	struct sta_info *psta = NULL;	
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	u8 bc_addr[ETH_ALEN] = {0xff,0xff,0xff,0xff,0xff,0xff};
++	u8 chk_alive_num = 0;
++	char chk_alive_list[NUM_STA];
++	int i;
++
++	DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(padapter->pnetdev));
++
++	if((pmlmeinfo->state&0x03) != WIFI_FW_AP_STATE)
++		return ret;
++
++	_enter_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++	phead = &pstapriv->asoc_list;
++	plist = get_next(phead);
++
++	while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) {
++		int stainfo_offset;
++		
++		psta = LIST_CONTAINOR(plist, struct sta_info, asoc_list);
++		plist = get_next(plist);
++
++		/* Remove sta from asoc_list */
++		rtw_list_delete(&psta->asoc_list);
++		pstapriv->asoc_list_cnt--;
++
++		/* Keep sta for ap_free_sta() beyond this asoc_list loop */
++		stainfo_offset = rtw_stainfo_offset(pstapriv, psta);
++		if (stainfo_offset_valid(stainfo_offset)) {
++			chk_alive_list[chk_alive_num++] = stainfo_offset;
++		}
++	}
++	_exit_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++
++
++	/* For each sta in chk_alive_list, call ap_free_sta */
++	for (i = 0; i < chk_alive_num; i++) {
++		psta = rtw_get_stainfo_by_offset(pstapriv, chk_alive_list[i]);
++		ap_free_sta(padapter, psta, _TRUE, WLAN_REASON_DEAUTH_LEAVING);
++	}
++
++	issue_deauth(padapter, bc_addr, WLAN_REASON_DEAUTH_LEAVING);
++
++	associated_clients_update(padapter, _TRUE);
++
++	return ret;
++
++}
++
++/* called > TSR LEVEL for USB or SDIO Interface*/
++void sta_info_update(_adapter *padapter, struct sta_info *psta)
++{	
++	int flags = psta->flags;
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	
++				
++	//update wmm cap.
++	if(WLAN_STA_WME&flags)
++		psta->qos_option = 1;
++	else
++		psta->qos_option = 0;
++
++	if(pmlmepriv->qospriv.qos_option == 0)	
++		psta->qos_option = 0;
++
++		
++#ifdef CONFIG_80211N_HT		
++	//update 802.11n ht cap.
++	if(WLAN_STA_HT&flags)
++	{
++		psta->htpriv.ht_option = _TRUE;
++		psta->qos_option = 1;	
++	}
++	else		
++	{
++		psta->htpriv.ht_option = _FALSE;
++	}
++		
++	if(pmlmepriv->htpriv.ht_option == _FALSE)	
++		psta->htpriv.ht_option = _FALSE;
++#endif		
++
++
++	update_sta_info_apmode(padapter, psta);
++		
++
++}
++
++/* called >= TSR LEVEL for USB or SDIO Interface*/
++void ap_sta_info_defer_update(_adapter *padapter, struct sta_info *psta)
++{
++	if(psta->state & _FW_LINKED)
++	{	
++		//add ratid
++		add_RATid(padapter, psta);
++	}	
++}
++
++/* restore hw setting from sw data structures */
++void rtw_ap_restore_network(_adapter *padapter)
++{
++	struct mlme_priv *mlmepriv = &padapter->mlmepriv;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct sta_priv * pstapriv = &padapter->stapriv;
++	struct sta_info *psta;
++	struct security_priv* psecuritypriv=&(padapter->securitypriv);
++	_irqL irqL;
++	_list	*phead, *plist;
++	u8 chk_alive_num = 0;
++	char chk_alive_list[NUM_STA];
++	int i;
++
++	rtw_setopmode_cmd(padapter, Ndis802_11APMode);
++
++	set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode);
++
++	start_bss_network(padapter, (u8*)&mlmepriv->cur_network.network);
++
++	if((padapter->securitypriv.dot11PrivacyAlgrthm == _TKIP_) ||
++		(padapter->securitypriv.dot11PrivacyAlgrthm == _AES_))
++	{
++		/* restore group key, WEP keys is restored in ips_leave() */
++		rtw_set_key(padapter, psecuritypriv, psecuritypriv->dot118021XGrpKeyid, 0);
++	}
++
++	/* per sta pairwise key and settings */
++	if((padapter->securitypriv.dot11PrivacyAlgrthm != _TKIP_) &&
++		(padapter->securitypriv.dot11PrivacyAlgrthm != _AES_)) {
++		return;
++	}
++
++	_enter_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++	
++	phead = &pstapriv->asoc_list;
++	plist = get_next(phead);
++
++	while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) {
++		int stainfo_offset;
++
++		psta = LIST_CONTAINOR(plist, struct sta_info, asoc_list);
++		plist = get_next(plist);
++
++		stainfo_offset = rtw_stainfo_offset(pstapriv, psta);
++		if (stainfo_offset_valid(stainfo_offset)) {
++			chk_alive_list[chk_alive_num++] = stainfo_offset;
++		}
++	}
++
++	_exit_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++
++	for (i = 0; i < chk_alive_num; i++) {
++		psta = rtw_get_stainfo_by_offset(pstapriv, chk_alive_list[i]);
++
++		if (psta == NULL) {
++			DBG_871X(FUNC_ADPT_FMT" sta_info is null\n", FUNC_ADPT_ARG(padapter));
++		} else if (psta->state &_FW_LINKED) {
++			Update_RA_Entry(padapter, psta->mac_id);
++			//pairwise key
++			rtw_setstakey_cmd(padapter, (unsigned char *)psta, _TRUE);
++		}
++	}
++
++}
++
++void start_ap_mode(_adapter *padapter)
++{
++	int i;
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
++	struct wlan_acl_pool *pacl_list = &pstapriv->acl_list;
++	
++	pmlmepriv->update_bcn = _FALSE;
++	
++	//init_mlme_ap_info(padapter);
++	pmlmeext->bstart_bss = _FALSE;
++
++	pmlmepriv->num_sta_non_erp = 0;
++
++	pmlmepriv->num_sta_no_short_slot_time = 0;
++
++	pmlmepriv->num_sta_no_short_preamble = 0;
++
++	pmlmepriv->num_sta_ht_no_gf = 0;
++
++	pmlmepriv->num_sta_no_ht = 0;
++	
++	pmlmepriv->num_sta_ht_20mhz = 0;
++
++	pmlmepriv->olbc = _FALSE;
++
++	pmlmepriv->olbc_ht = _FALSE;
++	
++#ifdef CONFIG_80211N_HT
++	pmlmepriv->ht_op_mode = 0;
++#endif
++
++	for(i=0; i<NUM_STA; i++)
++		pstapriv->sta_aid[i] = NULL;
++
++	pmlmepriv->wps_beacon_ie = NULL;	
++	pmlmepriv->wps_probe_resp_ie = NULL;
++	pmlmepriv->wps_assoc_resp_ie = NULL;
++	
++	pmlmepriv->p2p_beacon_ie = NULL;
++	pmlmepriv->p2p_probe_resp_ie = NULL;
++
++	
++	//for ACL 
++	_rtw_init_listhead(&(pacl_list->acl_node_q.queue));
++	pacl_list->num = 0;
++	pacl_list->mode = 0;
++	for(i = 0; i < NUM_ACL; i++)
++	{		
++		_rtw_init_listhead(&pacl_list->aclnode[i].list);
++		pacl_list->aclnode[i].valid = _FALSE;
++	}
++
++}
++
++void stop_ap_mode(_adapter *padapter)
++{
++	_irqL irqL;
++	_list	*phead, *plist;
++	struct rtw_wlan_acl_node *paclnode;
++	struct sta_info *psta=NULL;
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;	
++	struct wlan_acl_pool *pacl_list = &pstapriv->acl_list;
++	_queue	*pacl_node_q =&pacl_list->acl_node_q;	
++
++	pmlmepriv->update_bcn = _FALSE;
++	pmlmeext->bstart_bss = _FALSE;
++	//_rtw_spinlock_free(&pmlmepriv->bcn_update_lock);
++	
++	//reset and init security priv , this can refine with rtw_reset_securitypriv
++	_rtw_memset((unsigned char *)&padapter->securitypriv, 0, sizeof (struct security_priv));
++	padapter->securitypriv.ndisauthtype = Ndis802_11AuthModeOpen;
++	padapter->securitypriv.ndisencryptstatus = Ndis802_11WEPDisabled;
++
++	//for ACL
++	_enter_critical_bh(&(pacl_node_q->lock), &irqL);
++	phead = get_list_head(pacl_node_q);
++	plist = get_next(phead);		
++	while ((rtw_end_of_queue_search(phead, plist)) == _FALSE)
++	{
++		paclnode = LIST_CONTAINOR(plist, struct rtw_wlan_acl_node, list);
++		plist = get_next(plist);
++
++		if(paclnode->valid == _TRUE)
++		{
++			paclnode->valid = _FALSE;
++
++			rtw_list_delete(&paclnode->list);
++				
++			pacl_list->num--;		
++		}		
++	}	
++	_exit_critical_bh(&(pacl_node_q->lock), &irqL);
++	
++	DBG_871X("%s, free acl_node_queue, num=%d\n", __func__, pacl_list->num);
++	
++	rtw_sta_flush(padapter);
++
++	//free_assoc_sta_resources	
++	rtw_free_all_stainfo(padapter);
++	
++	psta = rtw_get_bcmc_stainfo(padapter);
++	_enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL);		
++	rtw_free_stainfo(padapter, psta);
++	_exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL);
++	
++	rtw_init_bcmc_stainfo(padapter);	
++
++	rtw_free_mlme_priv_ie_data(pmlmepriv);
++
++}
++
++#endif //CONFIG_NATIVEAP_MLME
++#endif //CONFIG_AP_MODE
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_br_ext.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_br_ext.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_br_ext.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_br_ext.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,1699 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _RTW_BR_EXT_C_
++
++#ifdef __KERNEL__
++#include <linux/if_arp.h>
++#include <net/ip.h>
++#include <net/ipx.h>
++#include <linux/atalk.h>
++#include <linux/udp.h>
++#include <linux/if_pppox.h>
++#endif
++
++#if 1	// rtw_wifi_driver
++#include <drv_conf.h>
++#include <drv_types.h>
++#include "rtw_br_ext.h"
++#else	// rtw_wifi_driver
++#include "./8192cd_cfg.h"
++
++#ifndef __KERNEL__
++#include "./sys-support.h"
++#endif
++
++#include "./8192cd.h"
++#include "./8192cd_headers.h"
++#include "./8192cd_br_ext.h"
++#include "./8192cd_debug.h"
++#endif	// rtw_wifi_driver
++
++#ifdef CL_IPV6_PASS
++#ifdef __KERNEL__
++#include <linux/ipv6.h>
++#include <linux/icmpv6.h>
++#include <net/ndisc.h>
++#include <net/checksum.h>
++#endif
++#endif
++
++#ifdef CONFIG_BR_EXT
++
++//#define BR_EXT_DEBUG
++
++#define NAT25_IPV4		01
++#define NAT25_IPV6		02
++#define NAT25_IPX		03
++#define NAT25_APPLE		04
++#define NAT25_PPPOE		05
++
++#define RTL_RELAY_TAG_LEN (ETH_ALEN)
++#define TAG_HDR_LEN		4
++
++#define MAGIC_CODE		0x8186
++#define MAGIC_CODE_LEN	2
++#define WAIT_TIME_PPPOE	5	// waiting time for pppoe server in sec
++
++/*-----------------------------------------------------------------
++  How database records network address:
++           0    1    2    3    4    5    6    7    8    9   10
++        |----|----|----|----|----|----|----|----|----|----|----|
++  IPv4  |type|                             |      IP addr      |
++  IPX   |type|      Net addr     |          Node addr          |
++  IPX   |type|      Net addr     |Sckt addr|
++  Apple |type| Network |node|
++  PPPoE |type|   SID   |           AC MAC            |
++-----------------------------------------------------------------*/
++
++
++//Find a tag in pppoe frame and return the pointer
++static __inline__ unsigned char *__nat25_find_pppoe_tag(struct pppoe_hdr *ph, unsigned short type)
++{
++	unsigned char *cur_ptr, *start_ptr;
++	unsigned short tagLen, tagType;
++
++	start_ptr = cur_ptr = (unsigned char *)ph->tag;
++	while((cur_ptr - start_ptr) < ntohs(ph->length)) {
++		// prevent un-alignment access
++		tagType = (unsigned short)((cur_ptr[0] << 8) + cur_ptr[1]);
++		tagLen  = (unsigned short)((cur_ptr[2] << 8) + cur_ptr[3]);
++		if(tagType == type)
++			return cur_ptr;
++		cur_ptr = cur_ptr + TAG_HDR_LEN + tagLen;
++	}
++	return 0;
++}
++
++
++static __inline__ int __nat25_add_pppoe_tag(struct sk_buff *skb, struct pppoe_tag *tag)
++{
++	struct pppoe_hdr *ph = (struct pppoe_hdr *)(skb->data + ETH_HLEN);
++	int data_len;
++
++	data_len = tag->tag_len + TAG_HDR_LEN;
++	if (skb_tailroom(skb) < data_len) {
++		_DEBUG_ERR("skb_tailroom() failed in add SID tag!\n");
++		return -1;
++	}
++
++	skb_put(skb, data_len);
++	// have a room for new tag
++	memmove(((unsigned char *)ph->tag + data_len), (unsigned char *)ph->tag, ntohs(ph->length));
++	ph->length = htons(ntohs(ph->length) + data_len);
++	memcpy((unsigned char *)ph->tag, tag, data_len);
++	return data_len;
++}
++
++static int skb_pull_and_merge(struct sk_buff *skb, unsigned char *src, int len)
++{
++	int tail_len;
++	unsigned long end, tail;
++
++	if ((src+len) > skb_tail_pointer(skb) || skb->len < len)
++		return -1;
++
++	tail = (unsigned long)skb_tail_pointer(skb);
++	end = (unsigned long)src+len;
++	if (tail < end)
++		return -1;
++
++	tail_len = (int)(tail-end);
++	if (tail_len > 0)
++		memmove(src, src+len, tail_len);
++
++	skb_trim(skb, skb->len-len);
++	return 0;
++}
++
++static __inline__ unsigned long __nat25_timeout(_adapter *priv)
++{
++	unsigned long timeout;
++
++	timeout = jiffies - NAT25_AGEING_TIME*HZ;
++
++	return timeout;
++}
++
++
++static __inline__ int  __nat25_has_expired(_adapter *priv,
++				struct nat25_network_db_entry *fdb)
++{
++	if(time_before_eq(fdb->ageing_timer, __nat25_timeout(priv)))
++		return 1;
++
++	return 0;
++}
++
++
++static __inline__ void __nat25_generate_ipv4_network_addr(unsigned char *networkAddr,
++				unsigned int *ipAddr)
++{
++	memset(networkAddr, 0, MAX_NETWORK_ADDR_LEN);
++
++	networkAddr[0] = NAT25_IPV4;
++	memcpy(networkAddr+7, (unsigned char *)ipAddr, 4);
++}
++
++
++static __inline__ void __nat25_generate_ipx_network_addr_with_node(unsigned char *networkAddr,
++				unsigned int *ipxNetAddr, unsigned char *ipxNodeAddr)
++{
++	memset(networkAddr, 0, MAX_NETWORK_ADDR_LEN);
++
++	networkAddr[0] = NAT25_IPX;
++	memcpy(networkAddr+1, (unsigned char *)ipxNetAddr, 4);
++	memcpy(networkAddr+5, ipxNodeAddr, 6);
++}
++
++
++static __inline__ void __nat25_generate_ipx_network_addr_with_socket(unsigned char *networkAddr,
++				unsigned int *ipxNetAddr, unsigned short *ipxSocketAddr)
++{
++	memset(networkAddr, 0, MAX_NETWORK_ADDR_LEN);
++
++	networkAddr[0] = NAT25_IPX;
++	memcpy(networkAddr+1, (unsigned char *)ipxNetAddr, 4);
++	memcpy(networkAddr+5, (unsigned char *)ipxSocketAddr, 2);
++}
++
++
++static __inline__ void __nat25_generate_apple_network_addr(unsigned char *networkAddr,
++				unsigned short *network, unsigned char *node)
++{
++	memset(networkAddr, 0, MAX_NETWORK_ADDR_LEN);
++
++	networkAddr[0] = NAT25_APPLE;
++	memcpy(networkAddr+1, (unsigned char *)network, 2);
++	networkAddr[3] = *node;
++}
++
++
++static __inline__ void __nat25_generate_pppoe_network_addr(unsigned char *networkAddr,
++				unsigned char *ac_mac, unsigned short *sid)
++{
++	memset(networkAddr, 0, MAX_NETWORK_ADDR_LEN);
++
++	networkAddr[0] = NAT25_PPPOE;
++	memcpy(networkAddr+1, (unsigned char *)sid, 2);
++	memcpy(networkAddr+3, (unsigned char *)ac_mac, 6);
++}
++
++
++#ifdef CL_IPV6_PASS
++static  void __nat25_generate_ipv6_network_addr(unsigned char *networkAddr,
++				unsigned int *ipAddr)
++{
++	memset(networkAddr, 0, MAX_NETWORK_ADDR_LEN);
++
++	networkAddr[0] = NAT25_IPV6;
++	memcpy(networkAddr+1, (unsigned char *)ipAddr, 16);
++}
++
++
++static unsigned char *scan_tlv(unsigned char *data, int len, unsigned char tag, unsigned char len8b)
++{
++	while (len > 0) {
++		if (*data == tag && *(data+1) == len8b && len >= len8b*8)
++			return data+2;	
++		
++		len -= (*(data+1))*8;		
++		data += (*(data+1))*8;		
++	}
++	return NULL;
++}
++
++
++static int update_nd_link_layer_addr(unsigned char *data, int len, unsigned char *replace_mac)
++{
++	struct icmp6hdr *icmphdr = (struct icmp6hdr *)data;
++	unsigned char *mac;
++	
++	if (icmphdr->icmp6_type == NDISC_ROUTER_SOLICITATION) { 
++		if (len >= 8) {
++			mac = scan_tlv(&data[8], len-8, 1, 1);
++			if (mac) {
++				_DEBUG_INFO("Router Solicitation, replace MAC From: %02x:%02x:%02x:%02x:%02x:%02x, To: %02x:%02x:%02x:%02x:%02x:%02x\n",
++					mac[0],mac[1],mac[2],mac[3],mac[4],mac[5],					
++					replace_mac[0],replace_mac[1],replace_mac[2],replace_mac[3],replace_mac[4],replace_mac[5]);
++				memcpy(mac, replace_mac, 6);	
++				return 1;				
++			}
++		}
++	}
++	else if (icmphdr->icmp6_type == NDISC_ROUTER_ADVERTISEMENT) {
++		if (len >= 16) {
++			mac = scan_tlv(&data[16], len-16, 1, 1);
++			if (mac) {
++				_DEBUG_INFO("Router Advertisement, replace MAC From: %02x:%02x:%02x:%02x:%02x:%02x, To: %02x:%02x:%02x:%02x:%02x:%02x\n",
++					mac[0],mac[1],mac[2],mac[3],mac[4],mac[5],					
++					replace_mac[0],replace_mac[1],replace_mac[2],replace_mac[3],replace_mac[4],replace_mac[5]);
++				memcpy(mac, replace_mac, 6);			
++				return 1;				
++			}
++		}		
++	}
++	else if (icmphdr->icmp6_type == NDISC_NEIGHBOUR_SOLICITATION) {
++		if (len >= 24) {
++			mac = scan_tlv(&data[24], len-24, 1, 1);
++			if (mac) {		
++				_DEBUG_INFO("Neighbor Solicitation, replace MAC From: %02x:%02x:%02x:%02x:%02x:%02x, To: %02x:%02x:%02x:%02x:%02x:%02x\n",
++					mac[0],mac[1],mac[2],mac[3],mac[4],mac[5],					
++					replace_mac[0],replace_mac[1],replace_mac[2],replace_mac[3],replace_mac[4],replace_mac[5]);
++				memcpy(mac, replace_mac, 6);	
++				return 1;								
++			}
++		}		
++	}
++	else if (icmphdr->icmp6_type == NDISC_NEIGHBOUR_ADVERTISEMENT) {
++		if (len >= 24) {
++			mac = scan_tlv(&data[24], len-24, 2, 1);
++			if (mac) {
++				_DEBUG_INFO("Neighbor Advertisement, replace MAC From: %02x:%02x:%02x:%02x:%02x:%02x, To: %02x:%02x:%02x:%02x:%02x:%02x\n",
++					mac[0],mac[1],mac[2],mac[3],mac[4],mac[5],					
++					replace_mac[0],replace_mac[1],replace_mac[2],replace_mac[3],replace_mac[4],replace_mac[5]);
++				memcpy(mac, replace_mac, 6);		
++				return 1;				
++			}
++		}		
++	}
++	else if (icmphdr->icmp6_type == NDISC_REDIRECT) {
++		if (len >= 40) {
++			mac = scan_tlv(&data[40], len-40, 2, 1);
++			if (mac) {				
++				_DEBUG_INFO("Redirect,  replace MAC From: %02x:%02x:%02x:%02x:%02x:%02x, To: %02x:%02x:%02x:%02x:%02x:%02x\n",
++					mac[0],mac[1],mac[2],mac[3],mac[4],mac[5],					
++					replace_mac[0],replace_mac[1],replace_mac[2],replace_mac[3],replace_mac[4],replace_mac[5]);
++				memcpy(mac, replace_mac, 6);	
++				return 1;				
++			}
++		}		
++	}	
++	return 0;
++}
++
++
++static void convert_ipv6_mac_to_mc(struct sk_buff *skb)
++{	
++	struct ipv6hdr *iph = (struct ipv6hdr *)(skb->data + ETH_HLEN);
++	unsigned char *dst_mac = skb->data;
++
++	//dst_mac[0] = 0xff;
++	//dst_mac[1] = 0xff;
++	/*modified by qinjunjie,ipv6 multicast address ix 0x33-33-xx-xx-xx-xx*/
++	dst_mac[0] = 0x33;
++	dst_mac[1] = 0x33;
++	memcpy(&dst_mac[2], &iph->daddr.s6_addr32[3], 4);
++	#if defined(__LINUX_2_6__) 
++	/*modified by qinjunjie,warning:should not remove next line*/
++	skb->pkt_type = PACKET_MULTICAST;
++	#endif
++}
++#endif /* CL_IPV6_PASS */
++
++
++static __inline__ int __nat25_network_hash(unsigned char *networkAddr)
++{
++	if(networkAddr[0] == NAT25_IPV4)
++	{
++		unsigned long x;
++
++		x = networkAddr[7] ^ networkAddr[8] ^ networkAddr[9] ^ networkAddr[10];
++
++		return x & (NAT25_HASH_SIZE - 1);
++	}
++	else if(networkAddr[0] == NAT25_IPX)
++	{
++		unsigned long x;
++
++		x = networkAddr[1] ^ networkAddr[2] ^ networkAddr[3] ^ networkAddr[4] ^ networkAddr[5] ^
++			networkAddr[6] ^ networkAddr[7] ^ networkAddr[8] ^ networkAddr[9] ^ networkAddr[10];
++
++		return x & (NAT25_HASH_SIZE - 1);
++	}
++	else if(networkAddr[0] == NAT25_APPLE)
++	{
++		unsigned long x;
++
++		x = networkAddr[1] ^ networkAddr[2] ^ networkAddr[3];
++
++		return x & (NAT25_HASH_SIZE - 1);
++	}
++	else if(networkAddr[0] == NAT25_PPPOE)
++	{
++		unsigned long x;
++
++		x = networkAddr[0] ^ networkAddr[1] ^ networkAddr[2] ^ networkAddr[3] ^ networkAddr[4] ^ networkAddr[5] ^ networkAddr[6] ^ networkAddr[7] ^ networkAddr[8];
++
++		return x & (NAT25_HASH_SIZE - 1);
++	}
++#ifdef CL_IPV6_PASS
++	else if(networkAddr[0] == NAT25_IPV6)
++	{
++		unsigned long x;
++
++		x = networkAddr[1] ^ networkAddr[2] ^ networkAddr[3] ^ networkAddr[4] ^ networkAddr[5] ^
++			networkAddr[6] ^ networkAddr[7] ^ networkAddr[8] ^ networkAddr[9] ^ networkAddr[10] ^
++			networkAddr[11] ^ networkAddr[12] ^ networkAddr[13] ^ networkAddr[14] ^ networkAddr[15] ^
++			networkAddr[16];
++	
++		return x & (NAT25_HASH_SIZE - 1);
++	}
++#endif	
++	else
++	{
++		unsigned long x = 0;
++		int i;
++
++		for (i=0; i<MAX_NETWORK_ADDR_LEN; i++)
++			x ^= networkAddr[i];
++
++		return x & (NAT25_HASH_SIZE - 1);
++	}
++}
++
++
++static __inline__ void __network_hash_link(_adapter *priv,
++				struct nat25_network_db_entry *ent, int hash)
++{
++	// Caller must _enter_critical_bh already!
++	//_irqL irqL;
++	//_enter_critical_bh(&priv->br_ext_lock, &irqL);
++
++	ent->next_hash = priv->nethash[hash];
++	if(ent->next_hash != NULL)
++		ent->next_hash->pprev_hash = &ent->next_hash;
++	priv->nethash[hash] = ent;
++	ent->pprev_hash = &priv->nethash[hash];
++
++	//_exit_critical_bh(&priv->br_ext_lock, &irqL);
++}
++
++
++static __inline__ void __network_hash_unlink(struct nat25_network_db_entry *ent)
++{
++	// Caller must _enter_critical_bh already!
++	//_irqL irqL;
++	//_enter_critical_bh(&priv->br_ext_lock, &irqL);
++
++	*(ent->pprev_hash) = ent->next_hash;
++	if(ent->next_hash != NULL)
++		ent->next_hash->pprev_hash = ent->pprev_hash;
++	ent->next_hash = NULL;
++	ent->pprev_hash = NULL;
++
++	//_exit_critical_bh(&priv->br_ext_lock, &irqL);
++}
++
++
++static int __nat25_db_network_lookup_and_replace(_adapter *priv,
++				struct sk_buff *skb, unsigned char *networkAddr)
++{
++	struct nat25_network_db_entry *db;
++	_irqL irqL;
++	_enter_critical_bh(&priv->br_ext_lock, &irqL);
++
++	db = priv->nethash[__nat25_network_hash(networkAddr)];
++	while (db != NULL)
++	{
++		if(!memcmp(db->networkAddr, networkAddr, MAX_NETWORK_ADDR_LEN))
++		{
++			if(!__nat25_has_expired(priv, db))
++			{
++				// replace the destination mac address
++				memcpy(skb->data, db->macAddr, ETH_ALEN);
++				atomic_inc(&db->use_count);
++
++#ifdef CL_IPV6_PASS
++				DEBUG_INFO("NAT25: Lookup M:%02x%02x%02x%02x%02x%02x N:%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x"	
++							"%02x%02x%02x%02x%02x%02x\n",				
++					db->macAddr[0],
++					db->macAddr[1],
++					db->macAddr[2],
++					db->macAddr[3],
++					db->macAddr[4],
++					db->macAddr[5],
++					db->networkAddr[0],
++					db->networkAddr[1],
++					db->networkAddr[2],
++					db->networkAddr[3],
++					db->networkAddr[4],
++					db->networkAddr[5],
++					db->networkAddr[6],
++					db->networkAddr[7],
++					db->networkAddr[8],
++					db->networkAddr[9],
++					db->networkAddr[10],
++					db->networkAddr[11],
++					db->networkAddr[12],
++					db->networkAddr[13],
++					db->networkAddr[14],
++					db->networkAddr[15],
++					db->networkAddr[16]);
++#else				
++				DEBUG_INFO("NAT25: Lookup M:%02x%02x%02x%02x%02x%02x N:%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x\n",
++					db->macAddr[0],
++					db->macAddr[1],
++					db->macAddr[2],
++					db->macAddr[3],
++					db->macAddr[4],
++					db->macAddr[5],
++					db->networkAddr[0],
++					db->networkAddr[1],
++					db->networkAddr[2],
++					db->networkAddr[3],
++					db->networkAddr[4],
++					db->networkAddr[5],
++					db->networkAddr[6],
++					db->networkAddr[7],
++					db->networkAddr[8],
++					db->networkAddr[9],
++					db->networkAddr[10]);
++#endif
++			}
++			_exit_critical_bh(&priv->br_ext_lock, &irqL);
++			return 1;
++		}
++
++		db = db->next_hash;
++	}
++
++	_exit_critical_bh(&priv->br_ext_lock, &irqL);
++	return 0;
++}
++
++
++static void __nat25_db_network_insert(_adapter *priv,
++				unsigned char *macAddr, unsigned char *networkAddr)
++{
++	struct nat25_network_db_entry *db;
++	int hash;
++	_irqL irqL;
++	_enter_critical_bh(&priv->br_ext_lock, &irqL);
++
++	hash = __nat25_network_hash(networkAddr);
++	db = priv->nethash[hash];
++	while (db != NULL)
++	{
++		if(!memcmp(db->networkAddr, networkAddr, MAX_NETWORK_ADDR_LEN))
++		{
++			memcpy(db->macAddr, macAddr, ETH_ALEN);
++			db->ageing_timer = jiffies;
++			_exit_critical_bh(&priv->br_ext_lock, &irqL);
++			return;
++		}
++
++		db = db->next_hash;
++	}
++
++	db = (struct nat25_network_db_entry *) rtw_malloc(sizeof(*db));
++	if(db == NULL) {
++		_exit_critical_bh(&priv->br_ext_lock, &irqL);
++		return;
++	}
++
++	memcpy(db->networkAddr, networkAddr, MAX_NETWORK_ADDR_LEN);
++	memcpy(db->macAddr, macAddr, ETH_ALEN);
++	atomic_set(&db->use_count, 1);
++	db->ageing_timer = jiffies;
++
++	__network_hash_link(priv, db, hash);
++
++	_exit_critical_bh(&priv->br_ext_lock, &irqL);
++}
++
++
++static void __nat25_db_print(_adapter *priv)
++{
++	_irqL irqL;
++	_enter_critical_bh(&priv->br_ext_lock, &irqL);
++
++#ifdef BR_EXT_DEBUG
++	static int counter = 0;
++	int i, j;
++	struct nat25_network_db_entry *db;
++
++	counter++;
++	if((counter % 16) != 0)
++		return;
++
++	for(i=0, j=0; i<NAT25_HASH_SIZE; i++)
++	{
++		db = priv->nethash[i];
++
++		while (db != NULL)
++		{
++#ifdef CL_IPV6_PASS
++			panic_printk("NAT25: DB(%d) H(%02d) C(%d) M:%02x%02x%02x%02x%02x%02x N:%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x"
++					"%02x%02x%02x%02x%02x%02x\n",
++				j,
++				i,
++				atomic_read(&db->use_count),
++				db->macAddr[0],
++				db->macAddr[1],
++				db->macAddr[2],
++				db->macAddr[3],
++				db->macAddr[4],
++				db->macAddr[5],
++				db->networkAddr[0],
++				db->networkAddr[1],
++				db->networkAddr[2],
++				db->networkAddr[3],
++				db->networkAddr[4],
++				db->networkAddr[5],
++				db->networkAddr[6],
++				db->networkAddr[7],
++				db->networkAddr[8],
++				db->networkAddr[9],
++				db->networkAddr[10],
++				db->networkAddr[11],
++				db->networkAddr[12],
++				db->networkAddr[13],
++				db->networkAddr[14],
++				db->networkAddr[15],
++				db->networkAddr[16]);
++#else
++			panic_printk("NAT25: DB(%d) H(%02d) C(%d) M:%02x%02x%02x%02x%02x%02x N:%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x\n",
++				j,
++				i,
++				atomic_read(&db->use_count),
++				db->macAddr[0],
++				db->macAddr[1],
++				db->macAddr[2],
++				db->macAddr[3],
++				db->macAddr[4],
++				db->macAddr[5],
++				db->networkAddr[0],
++				db->networkAddr[1],
++				db->networkAddr[2],
++				db->networkAddr[3],
++				db->networkAddr[4],
++				db->networkAddr[5],
++				db->networkAddr[6],
++				db->networkAddr[7],
++				db->networkAddr[8],
++				db->networkAddr[9],
++				db->networkAddr[10]);
++#endif
++			j++;
++
++			db = db->next_hash;
++		}
++	}
++#endif
++
++	_exit_critical_bh(&priv->br_ext_lock, &irqL);
++}
++
++
++
++
++/*
++ *	NAT2.5 interface
++ */
++
++void nat25_db_cleanup(_adapter *priv)
++{
++	int i;
++	_irqL irqL;
++	_enter_critical_bh(&priv->br_ext_lock, &irqL);
++	
++	for(i=0; i<NAT25_HASH_SIZE; i++)
++	{
++		struct nat25_network_db_entry *f;
++		f = priv->nethash[i];
++		while (f != NULL) {
++			struct nat25_network_db_entry *g;
++
++			g = f->next_hash;
++			if(priv->scdb_entry == f)
++			{
++				memset(priv->scdb_mac, 0, ETH_ALEN);
++				memset(priv->scdb_ip, 0, 4);
++				priv->scdb_entry = NULL;
++			}
++			__network_hash_unlink(f);
++			rtw_mfree((u8 *) f, sizeof(struct nat25_network_db_entry));
++
++			f = g;
++		}
++	}
++
++	_exit_critical_bh(&priv->br_ext_lock, &irqL);
++}
++
++
++void nat25_db_expire(_adapter *priv)
++{
++	int i;
++	_irqL irqL;
++	_enter_critical_bh(&priv->br_ext_lock, &irqL);
++	
++	//if(!priv->ethBrExtInfo.nat25_disable)
++	{
++		for (i=0; i<NAT25_HASH_SIZE; i++)
++		{
++			struct nat25_network_db_entry *f;
++			f = priv->nethash[i];
++
++			while (f != NULL)
++			{
++				struct nat25_network_db_entry *g;
++				g = f->next_hash;
++
++				if(__nat25_has_expired(priv, f))
++				{
++					if(atomic_dec_and_test(&f->use_count))
++					{
++#ifdef BR_EXT_DEBUG
++#ifdef CL_IPV6_PASS
++						panic_printk("NAT25 Expire H(%02d) M:%02x%02x%02x%02x%02x%02x N:%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x"
++								"%02x%02x%02x%02x%02x%02x\n",
++							i,
++							f->macAddr[0],
++							f->macAddr[1],
++							f->macAddr[2],
++							f->macAddr[3],
++							f->macAddr[4],
++							f->macAddr[5],
++							f->networkAddr[0],
++							f->networkAddr[1],
++							f->networkAddr[2],
++							f->networkAddr[3],
++							f->networkAddr[4],
++							f->networkAddr[5],
++							f->networkAddr[6],
++							f->networkAddr[7],
++							f->networkAddr[8],
++							f->networkAddr[9],
++							f->networkAddr[10],
++							f->networkAddr[11],
++							f->networkAddr[12],
++							f->networkAddr[13],
++							f->networkAddr[14],
++							f->networkAddr[15],
++							f->networkAddr[16]);
++#else
++
++						panic_printk("NAT25 Expire H(%02d) M:%02x%02x%02x%02x%02x%02x N:%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x\n",
++							i,
++							f->macAddr[0],
++							f->macAddr[1],
++							f->macAddr[2],
++							f->macAddr[3],
++							f->macAddr[4],
++							f->macAddr[5],
++							f->networkAddr[0],
++							f->networkAddr[1],
++							f->networkAddr[2],
++							f->networkAddr[3],
++							f->networkAddr[4],
++							f->networkAddr[5],
++							f->networkAddr[6],
++							f->networkAddr[7],
++							f->networkAddr[8],
++							f->networkAddr[9],
++							f->networkAddr[10]);
++#endif
++#endif
++						if(priv->scdb_entry == f)
++						{
++							memset(priv->scdb_mac, 0, ETH_ALEN);
++							memset(priv->scdb_ip, 0, 4);
++							priv->scdb_entry = NULL;
++						}
++						__network_hash_unlink(f);
++						rtw_mfree((u8 *) f, sizeof(struct nat25_network_db_entry));
++					}
++				}
++
++				f = g;
++			}
++		}
++	}
++
++	_exit_critical_bh(&priv->br_ext_lock, &irqL);
++}
++
++
++#ifdef SUPPORT_TX_MCAST2UNI
++static int checkIPMcAndReplace(_adapter *priv, struct sk_buff *skb, unsigned int *dst_ip)
++{
++	struct stat_info	*pstat;
++	struct list_head	*phead, *plist;
++	int i;
++
++	phead = &priv->asoc_list;
++	plist = phead->next;
++
++	while (plist != phead) {
++		pstat = list_entry(plist, struct stat_info, asoc_list);
++		plist = plist->next;
++
++		if (pstat->ipmc_num == 0)
++			continue;
++
++		for (i=0; i<MAX_IP_MC_ENTRY; i++) {
++			if (pstat->ipmc[i].used && !memcmp(&pstat->ipmc[i].mcmac[3], ((unsigned char *)dst_ip)+1, 3)) {
++				memcpy(skb->data, pstat->ipmc[i].mcmac, ETH_ALEN);
++				return 1;
++			}
++		}
++	}
++	return 0;
++}
++#endif
++
++int nat25_db_handle(_adapter *priv, struct sk_buff *skb, int method)
++{
++	unsigned short protocol;
++	unsigned char networkAddr[MAX_NETWORK_ADDR_LEN];
++
++	if(skb == NULL)
++		return -1;
++
++	if((method <= NAT25_MIN) || (method >= NAT25_MAX))
++		return -1;
++
++	protocol = *((unsigned short *)(skb->data + 2 * ETH_ALEN));
++
++	/*---------------------------------------------------*/
++	/*                 Handle IP frame                   */
++	/*---------------------------------------------------*/
++	if(protocol == __constant_htons(ETH_P_IP))
++	{
++		struct iphdr* iph = (struct iphdr *)(skb->data + ETH_HLEN);
++
++		if(((unsigned char*)(iph) + (iph->ihl<<2)) >= (skb->data + ETH_HLEN + skb->len))
++		{
++			DEBUG_WARN("NAT25: malformed IP packet !\n");
++			return -1;
++		}
++
++		switch(method)
++		{
++			case NAT25_CHECK:
++				return -1;
++
++			case NAT25_INSERT:
++				{
++					//some muticast with source IP is all zero, maybe other case is illegal
++					//in class A, B, C, host address is all zero or all one is illegal
++					if (iph->saddr == 0)
++						return 0;
++					DEBUG_INFO("NAT25: Insert IP, SA=%08x, DA=%08x\n", iph->saddr, iph->daddr);
++					__nat25_generate_ipv4_network_addr(networkAddr, &iph->saddr);
++					//record source IP address and , source mac address into db
++					__nat25_db_network_insert(priv, skb->data+ETH_ALEN, networkAddr);
++
++					__nat25_db_print(priv);
++				}
++				return 0;
++
++			case NAT25_LOOKUP:
++				{
++					DEBUG_INFO("NAT25: Lookup IP, SA=%08x, DA=%08x\n", iph->saddr, iph->daddr);
++#ifdef SUPPORT_TX_MCAST2UNI
++					if (priv->pshare->rf_ft_var.mc2u_disable ||
++							((((OPMODE & (WIFI_STATION_STATE|WIFI_ASOC_STATE))
++							== (WIFI_STATION_STATE|WIFI_ASOC_STATE)) &&
++							!checkIPMcAndReplace(priv, skb, &iph->daddr)) ||
++							(OPMODE & WIFI_ADHOC_STATE)))
++#endif
++					{
++						__nat25_generate_ipv4_network_addr(networkAddr, &iph->daddr);
++
++						if (!__nat25_db_network_lookup_and_replace(priv, skb, networkAddr)) {
++							if (*((unsigned char *)&iph->daddr + 3) == 0xff) {
++								// L2 is unicast but L3 is broadcast, make L2 bacome broadcast
++								DEBUG_INFO("NAT25: Set DA as boardcast\n");
++								memset(skb->data, 0xff, ETH_ALEN);
++							}
++							else {
++								// forward unknow IP packet to upper TCP/IP
++								DEBUG_INFO("NAT25: Replace DA with BR's MAC\n");
++								if ( (*(u32 *)priv->br_mac) == 0 && (*(u16 *)(priv->br_mac+4)) == 0 ) {
++									void netdev_br_init(struct net_device *netdev);
++									printk("Re-init netdev_br_init() due to br_mac==0!\n");
++									netdev_br_init(priv->pnetdev);
++								}
++								memcpy(skb->data, priv->br_mac, ETH_ALEN);
++							}
++						}
++					}
++				}
++				return 0;
++
++			default:
++				return -1;
++		}
++	}
++
++	/*---------------------------------------------------*/
++	/*                 Handle ARP frame                  */
++	/*---------------------------------------------------*/
++	else if(protocol == __constant_htons(ETH_P_ARP))
++	{
++		struct arphdr *arp = (struct arphdr *)(skb->data + ETH_HLEN);
++		unsigned char *arp_ptr = (unsigned char *)(arp + 1);
++		unsigned int *sender, *target;
++
++		if(arp->ar_pro != __constant_htons(ETH_P_IP))
++		{
++			DEBUG_WARN("NAT25: arp protocol unknown (%4x)!\n", htons(arp->ar_pro));
++			return -1;
++		}
++
++		switch(method)
++		{
++			case NAT25_CHECK:
++				return 0;	// skb_copy for all ARP frame
++
++			case NAT25_INSERT:
++				{
++					DEBUG_INFO("NAT25: Insert ARP, MAC=%02x%02x%02x%02x%02x%02x\n", arp_ptr[0],
++						arp_ptr[1], arp_ptr[2], arp_ptr[3], arp_ptr[4], arp_ptr[5]);
++
++					// change to ARP sender mac address to wlan STA address
++                                        memcpy(arp_ptr, GET_MY_HWADDR(priv), ETH_ALEN);
++
++					arp_ptr += arp->ar_hln;
++					sender = (unsigned int *)arp_ptr;
++
++					__nat25_generate_ipv4_network_addr(networkAddr, sender);
++
++					__nat25_db_network_insert(priv, skb->data+ETH_ALEN, networkAddr);
++
++					__nat25_db_print(priv);
++				}
++				return 0;
++
++			case NAT25_LOOKUP:
++				{
++					DEBUG_INFO("NAT25: Lookup ARP\n");
++
++					arp_ptr += arp->ar_hln;
++					sender = (unsigned int *)arp_ptr;
++					arp_ptr += (arp->ar_hln + arp->ar_pln);
++					target = (unsigned int *)arp_ptr;
++
++					__nat25_generate_ipv4_network_addr(networkAddr, target);
++
++					__nat25_db_network_lookup_and_replace(priv, skb, networkAddr);
++
++					// change to ARP target mac address to Lookup result
++					arp_ptr = (unsigned char *)(arp + 1);
++					arp_ptr += (arp->ar_hln + arp->ar_pln);
++					memcpy(arp_ptr, skb->data, ETH_ALEN);
++				}
++				return 0;
++
++			default:
++				return -1;
++		}
++	}
++
++	/*---------------------------------------------------*/
++	/*         Handle IPX and Apple Talk frame           */
++	/*---------------------------------------------------*/
++	else if((protocol == __constant_htons(ETH_P_IPX)) ||
++		(protocol <= __constant_htons(ETH_FRAME_LEN)))
++	{
++		unsigned char ipx_header[2] = {0xFF, 0xFF};
++		struct ipxhdr	*ipx = NULL;
++		struct elapaarp	*ea = NULL;
++		struct ddpehdr	*ddp = NULL;
++		unsigned char *framePtr = skb->data + ETH_HLEN;
++
++		if(protocol == __constant_htons(ETH_P_IPX))
++		{
++			DEBUG_INFO("NAT25: Protocol=IPX (Ethernet II)\n");
++			ipx = (struct ipxhdr *)framePtr;
++		}
++		else if(protocol <= __constant_htons(ETH_FRAME_LEN))
++		{
++			if(!memcmp(ipx_header, framePtr, 2))
++			{
++				DEBUG_INFO("NAT25: Protocol=IPX (Ethernet 802.3)\n");
++				ipx = (struct ipxhdr *)framePtr;
++			}
++			else
++			{
++				unsigned char ipx_8022_type =  0xE0;
++				unsigned char snap_8022_type = 0xAA;
++
++				if(*framePtr == snap_8022_type)
++				{
++					unsigned char ipx_snap_id[5] = {0x0, 0x0, 0x0, 0x81, 0x37};		// IPX SNAP ID
++					unsigned char aarp_snap_id[5] = {0x00, 0x00, 0x00, 0x80, 0xF3};	// Apple Talk AARP SNAP ID
++					unsigned char ddp_snap_id[5] = {0x08, 0x00, 0x07, 0x80, 0x9B};	// Apple Talk DDP SNAP ID
++
++					framePtr += 3;	// eliminate the 802.2 header
++
++					if(!memcmp(ipx_snap_id, framePtr, 5))
++					{
++						framePtr += 5;	// eliminate the SNAP header
++
++						DEBUG_INFO("NAT25: Protocol=IPX (Ethernet SNAP)\n");
++						ipx = (struct ipxhdr *)framePtr;
++					}
++					else if(!memcmp(aarp_snap_id, framePtr, 5))
++					{
++						framePtr += 5;	// eliminate the SNAP header
++
++						ea = (struct elapaarp *)framePtr;
++					}
++					else if(!memcmp(ddp_snap_id, framePtr, 5))
++					{
++						framePtr += 5;	// eliminate the SNAP header
++
++						ddp = (struct ddpehdr *)framePtr;
++					}
++					else
++					{
++						DEBUG_WARN("NAT25: Protocol=Ethernet SNAP %02x%02x%02x%02x%02x\n", framePtr[0],
++							framePtr[1], framePtr[2], framePtr[3], framePtr[4]);
++						return -1;
++					}
++				}
++				else if(*framePtr == ipx_8022_type)
++				{
++					framePtr += 3;	// eliminate the 802.2 header
++
++					if(!memcmp(ipx_header, framePtr, 2))
++					{
++						DEBUG_INFO("NAT25: Protocol=IPX (Ethernet 802.2)\n");
++						ipx = (struct ipxhdr *)framePtr;
++					}
++					else
++						return -1;
++				}
++				else
++					return -1;
++			}
++		}
++		else
++			return -1;
++
++		/*   IPX   */
++		if(ipx != NULL)
++		{
++			switch(method)
++			{
++				case NAT25_CHECK:
++					if(!memcmp(skb->data+ETH_ALEN, ipx->ipx_source.node, ETH_ALEN))
++					{
++						DEBUG_INFO("NAT25: Check IPX skb_copy\n");
++						return 0;
++					}
++					return -1;
++
++				case NAT25_INSERT:
++					{
++						DEBUG_INFO("NAT25: Insert IPX, Dest=%08x,%02x%02x%02x%02x%02x%02x,%04x Source=%08x,%02x%02x%02x%02x%02x%02x,%04x\n",
++							ipx->ipx_dest.net,
++							ipx->ipx_dest.node[0],
++							ipx->ipx_dest.node[1],
++							ipx->ipx_dest.node[2],
++							ipx->ipx_dest.node[3],
++							ipx->ipx_dest.node[4],
++							ipx->ipx_dest.node[5],
++							ipx->ipx_dest.sock,
++							ipx->ipx_source.net,
++							ipx->ipx_source.node[0],
++							ipx->ipx_source.node[1],
++							ipx->ipx_source.node[2],
++							ipx->ipx_source.node[3],
++							ipx->ipx_source.node[4],
++							ipx->ipx_source.node[5],
++							ipx->ipx_source.sock);
++
++						if(!memcmp(skb->data+ETH_ALEN, ipx->ipx_source.node, ETH_ALEN))
++						{
++							DEBUG_INFO("NAT25: Use IPX Net, and Socket as network addr\n");
++
++							__nat25_generate_ipx_network_addr_with_socket(networkAddr, &ipx->ipx_source.net, &ipx->ipx_source.sock);
++
++							// change IPX source node addr to wlan STA address
++                                                        memcpy(ipx->ipx_source.node, GET_MY_HWADDR(priv), ETH_ALEN);
++						}
++						else
++						{
++							__nat25_generate_ipx_network_addr_with_node(networkAddr, &ipx->ipx_source.net, ipx->ipx_source.node);
++						}
++
++						__nat25_db_network_insert(priv, skb->data+ETH_ALEN, networkAddr);
++
++						__nat25_db_print(priv);
++					}
++					return 0;
++
++				case NAT25_LOOKUP:
++					{
++                                                if(!memcmp(GET_MY_HWADDR(priv), ipx->ipx_dest.node, ETH_ALEN))
++						{
++							DEBUG_INFO("NAT25: Lookup IPX, Modify Destination IPX Node addr\n");
++
++							__nat25_generate_ipx_network_addr_with_socket(networkAddr, &ipx->ipx_dest.net, &ipx->ipx_dest.sock);
++
++							__nat25_db_network_lookup_and_replace(priv, skb, networkAddr);
++
++							// replace IPX destination node addr with Lookup destination MAC addr
++							memcpy(ipx->ipx_dest.node, skb->data, ETH_ALEN);
++						}
++						else
++						{
++							__nat25_generate_ipx_network_addr_with_node(networkAddr, &ipx->ipx_dest.net, ipx->ipx_dest.node);
++
++							__nat25_db_network_lookup_and_replace(priv, skb, networkAddr);
++						}
++					}
++					return 0;
++
++				default:
++					return -1;
++			}
++		}
++
++		/*   AARP   */
++		else if(ea != NULL)
++		{
++			/* Sanity check fields. */
++			if(ea->hw_len != ETH_ALEN || ea->pa_len != AARP_PA_ALEN)
++			{
++				DEBUG_WARN("NAT25: Appletalk AARP Sanity check fail!\n");
++				return -1;
++			}
++
++			switch(method)
++			{
++				case NAT25_CHECK:
++					return 0;
++
++				case NAT25_INSERT:
++					{
++						// change to AARP source mac address to wlan STA address
++                                                memcpy(ea->hw_src, GET_MY_HWADDR(priv), ETH_ALEN);
++
++						DEBUG_INFO("NAT25: Insert AARP, Source=%d,%d Destination=%d,%d\n",
++							ea->pa_src_net,
++							ea->pa_src_node,
++							ea->pa_dst_net,
++							ea->pa_dst_node);
++
++						__nat25_generate_apple_network_addr(networkAddr, &ea->pa_src_net, &ea->pa_src_node);
++
++						__nat25_db_network_insert(priv, skb->data+ETH_ALEN, networkAddr);
++
++						__nat25_db_print(priv);
++					}
++					return 0;
++
++				case NAT25_LOOKUP:
++					{
++						DEBUG_INFO("NAT25: Lookup AARP, Source=%d,%d Destination=%d,%d\n",
++							ea->pa_src_net,
++							ea->pa_src_node,
++							ea->pa_dst_net,
++							ea->pa_dst_node);
++
++						__nat25_generate_apple_network_addr(networkAddr, &ea->pa_dst_net, &ea->pa_dst_node);
++
++						__nat25_db_network_lookup_and_replace(priv, skb, networkAddr);
++
++						// change to AARP destination mac address to Lookup result
++						memcpy(ea->hw_dst, skb->data, ETH_ALEN);
++					}
++					return 0;
++
++				default:
++					return -1;
++			}
++		}
++
++		/*   DDP   */
++		else if(ddp != NULL)
++		{
++			switch(method)
++			{
++				case NAT25_CHECK:
++					return -1;
++
++				case NAT25_INSERT:
++					{
++						DEBUG_INFO("NAT25: Insert DDP, Source=%d,%d Destination=%d,%d\n",
++							ddp->deh_snet,
++							ddp->deh_snode,
++							ddp->deh_dnet,
++							ddp->deh_dnode);
++
++						__nat25_generate_apple_network_addr(networkAddr, &ddp->deh_snet, &ddp->deh_snode);
++
++						__nat25_db_network_insert(priv, skb->data+ETH_ALEN, networkAddr);
++
++						__nat25_db_print(priv);
++					}
++					return 0;
++
++				case NAT25_LOOKUP:
++					{
++						DEBUG_INFO("NAT25: Lookup DDP, Source=%d,%d Destination=%d,%d\n",
++							ddp->deh_snet,
++							ddp->deh_snode,
++							ddp->deh_dnet,
++							ddp->deh_dnode);
++
++						__nat25_generate_apple_network_addr(networkAddr, &ddp->deh_dnet, &ddp->deh_dnode);
++
++						__nat25_db_network_lookup_and_replace(priv, skb, networkAddr);
++					}
++					return 0;
++
++				default:
++					return -1;
++			}
++		}
++
++		return -1;
++	}
++
++	/*---------------------------------------------------*/
++	/*                Handle PPPoE frame                 */
++	/*---------------------------------------------------*/
++	else if((protocol == __constant_htons(ETH_P_PPP_DISC)) ||
++		(protocol == __constant_htons(ETH_P_PPP_SES)))
++	{
++		struct pppoe_hdr *ph = (struct pppoe_hdr *)(skb->data + ETH_HLEN);
++		unsigned short *pMagic;
++
++		switch(method)
++		{
++			case NAT25_CHECK:
++				if (ph->sid == 0)
++					return 0;
++				return 1;
++
++			case NAT25_INSERT:
++				if(ph->sid == 0)	// Discovery phase according to tag
++				{
++					if(ph->code == PADI_CODE || ph->code == PADR_CODE)
++					{
++						if (priv->ethBrExtInfo.addPPPoETag) {
++							struct pppoe_tag *tag, *pOldTag;
++							unsigned char tag_buf[40];
++							int old_tag_len=0;
++
++							tag = (struct pppoe_tag *)tag_buf;
++							pOldTag = (struct pppoe_tag *)__nat25_find_pppoe_tag(ph, ntohs(PTT_RELAY_SID));
++							if (pOldTag) { // if SID existed, copy old value and delete it
++								old_tag_len = ntohs(pOldTag->tag_len);
++								if (old_tag_len+TAG_HDR_LEN+MAGIC_CODE_LEN+RTL_RELAY_TAG_LEN > sizeof(tag_buf)) {
++									DEBUG_ERR("SID tag length too long!\n");
++									return -1;
++								}
++
++								memcpy(tag->tag_data+MAGIC_CODE_LEN+RTL_RELAY_TAG_LEN,
++									pOldTag->tag_data, old_tag_len);
++
++								if (skb_pull_and_merge(skb, (unsigned char *)pOldTag, TAG_HDR_LEN+old_tag_len) < 0) {
++									DEBUG_ERR("call skb_pull_and_merge() failed in PADI/R packet!\n");
++									return -1;
++								}
++								ph->length = htons(ntohs(ph->length)-TAG_HDR_LEN-old_tag_len);
++							}
++
++							tag->tag_type = PTT_RELAY_SID;
++							tag->tag_len = htons(MAGIC_CODE_LEN+RTL_RELAY_TAG_LEN+old_tag_len);
++
++							// insert the magic_code+client mac in relay tag
++							pMagic = (unsigned short *)tag->tag_data;
++							*pMagic = htons(MAGIC_CODE);
++							memcpy(tag->tag_data+MAGIC_CODE_LEN, skb->data+ETH_ALEN, ETH_ALEN);
++
++							//Add relay tag
++							if(__nat25_add_pppoe_tag(skb, tag) < 0)
++								return -1;
++
++							DEBUG_INFO("NAT25: Insert PPPoE, forward %s packet\n",
++											(ph->code == PADI_CODE ? "PADI" : "PADR"));
++						}
++						else { // not add relay tag
++							if (priv->pppoe_connection_in_progress &&
++									memcmp(skb->data+ETH_ALEN, priv->pppoe_addr, ETH_ALEN))	 {
++								DEBUG_ERR("Discard PPPoE packet due to another PPPoE connection is in progress!\n");
++								return -2;
++							}
++
++							if (priv->pppoe_connection_in_progress == 0)
++								memcpy(priv->pppoe_addr, skb->data+ETH_ALEN, ETH_ALEN);
++
++							priv->pppoe_connection_in_progress = WAIT_TIME_PPPOE;
++						}
++					}
++					else
++						return -1;
++				}
++				else	// session phase
++				{
++						DEBUG_INFO("NAT25: Insert PPPoE, insert session packet to %s\n", skb->dev->name);
++
++						__nat25_generate_pppoe_network_addr(networkAddr, skb->data, &(ph->sid));
++
++						__nat25_db_network_insert(priv, skb->data+ETH_ALEN, networkAddr);
++
++						__nat25_db_print(priv);
++
++						if (!priv->ethBrExtInfo.addPPPoETag &&
++								priv->pppoe_connection_in_progress &&
++									!memcmp(skb->data+ETH_ALEN, priv->pppoe_addr, ETH_ALEN))
++							priv->pppoe_connection_in_progress = 0;
++				}
++				return 0;
++
++			case NAT25_LOOKUP:
++				if(ph->code == PADO_CODE || ph->code == PADS_CODE)
++				{
++					if (priv->ethBrExtInfo.addPPPoETag) {
++						struct pppoe_tag *tag;
++						unsigned char *ptr;
++						unsigned short tagType, tagLen;
++						int offset=0;
++
++						if((ptr = __nat25_find_pppoe_tag(ph, ntohs(PTT_RELAY_SID))) == 0) {
++							DEBUG_ERR("Fail to find PTT_RELAY_SID in FADO!\n");
++							return -1;
++						}
++
++						tag = (struct pppoe_tag *)ptr;
++						tagType = (unsigned short)((ptr[0] << 8) + ptr[1]);
++						tagLen = (unsigned short)((ptr[2] << 8) + ptr[3]);
++
++						if((tagType != ntohs(PTT_RELAY_SID)) || (tagLen < (MAGIC_CODE_LEN+RTL_RELAY_TAG_LEN))) {
++							DEBUG_ERR("Invalid PTT_RELAY_SID tag length [%d]!\n", tagLen);
++							return -1;
++						}
++
++						pMagic = (unsigned short *)tag->tag_data;
++						if (ntohs(*pMagic) != MAGIC_CODE) {
++							DEBUG_ERR("Can't find MAGIC_CODE in %s packet!\n",
++								(ph->code == PADO_CODE ? "PADO" : "PADS"));
++							return -1;
++						}
++
++						memcpy(skb->data, tag->tag_data+MAGIC_CODE_LEN, ETH_ALEN);
++
++						if (tagLen > MAGIC_CODE_LEN+RTL_RELAY_TAG_LEN)
++							offset = TAG_HDR_LEN;
++
++						if (skb_pull_and_merge(skb, ptr+offset, TAG_HDR_LEN+MAGIC_CODE_LEN+RTL_RELAY_TAG_LEN-offset) < 0) {
++							DEBUG_ERR("call skb_pull_and_merge() failed in PADO packet!\n");
++							return -1;
++						}
++						ph->length = htons(ntohs(ph->length)-(TAG_HDR_LEN+MAGIC_CODE_LEN+RTL_RELAY_TAG_LEN-offset));
++						if (offset > 0)
++							tag->tag_len = htons(tagLen-MAGIC_CODE_LEN-RTL_RELAY_TAG_LEN);
++
++						DEBUG_INFO("NAT25: Lookup PPPoE, forward %s Packet from %s\n",
++							(ph->code == PADO_CODE ? "PADO" : "PADS"),	skb->dev->name);
++					}
++					else { // not add relay tag
++						if (!priv->pppoe_connection_in_progress) {
++							DEBUG_ERR("Discard PPPoE packet due to no connection in progresss!\n");
++							return -1;
++						}
++						memcpy(skb->data, priv->pppoe_addr, ETH_ALEN);
++						priv->pppoe_connection_in_progress = WAIT_TIME_PPPOE;
++					}
++				}
++				else {
++					if(ph->sid != 0)
++					{
++						DEBUG_INFO("NAT25: Lookup PPPoE, lookup session packet from %s\n", skb->dev->name);
++						__nat25_generate_pppoe_network_addr(networkAddr, skb->data+ETH_ALEN, &(ph->sid));
++
++						__nat25_db_network_lookup_and_replace(priv, skb, networkAddr);
++
++						__nat25_db_print(priv);
++					}
++					else
++						return -1;
++
++				}
++				return 0;
++
++			default:
++				return -1;
++		}
++	}
++
++	/*---------------------------------------------------*/
++	/*                 Handle EAP frame                  */
++	/*---------------------------------------------------*/
++	else if(protocol == __constant_htons(0x888e))
++	{
++		switch(method)
++		{
++			case NAT25_CHECK:
++				return -1;
++
++			case NAT25_INSERT:
++				return 0;
++
++			case NAT25_LOOKUP:
++				return 0;
++
++			default:
++				return -1;
++		}
++	}
++
++	/*---------------------------------------------------*/
++	/*         Handle C-Media proprietary frame          */
++	/*---------------------------------------------------*/
++	else if((protocol == __constant_htons(0xe2ae)) ||
++		(protocol == __constant_htons(0xe2af)))
++	{
++		switch(method)
++		{
++			case NAT25_CHECK:
++				return -1;
++
++			case NAT25_INSERT:
++				return 0;
++
++			case NAT25_LOOKUP:
++				return 0;
++
++			default:
++				return -1;
++		}
++	}
++
++	/*---------------------------------------------------*/
++	/*         Handle IPV6 frame      							  */
++	/*---------------------------------------------------*/
++#ifdef CL_IPV6_PASS
++	else if(protocol == __constant_htons(ETH_P_IPV6))
++	{
++		struct ipv6hdr *iph = (struct ipv6hdr *)(skb->data + ETH_HLEN);
++
++		if (sizeof(*iph) >= (skb->len - ETH_HLEN))
++		{
++			DEBUG_WARN("NAT25: malformed IPv6 packet !\n");
++			return -1;
++		}
++
++		switch(method)
++		{
++			case NAT25_CHECK:
++				if (skb->data[0] & 1)
++					return 0;				
++				return -1;
++
++			case NAT25_INSERT:
++				{
++					DEBUG_INFO("NAT25: Insert IP, SA=%4x:%4x:%4x:%4x:%4x:%4x:%4x:%4x,"
++									" DA=%4x:%4x:%4x:%4x:%4x:%4x:%4x:%4x\n", 
++						iph->saddr.s6_addr16[0],iph->saddr.s6_addr16[1],iph->saddr.s6_addr16[2],iph->saddr.s6_addr16[3],
++						iph->saddr.s6_addr16[4],iph->saddr.s6_addr16[5],iph->saddr.s6_addr16[6],iph->saddr.s6_addr16[7],
++						iph->daddr.s6_addr16[0],iph->daddr.s6_addr16[1],iph->daddr.s6_addr16[2],iph->daddr.s6_addr16[3],
++						iph->daddr.s6_addr16[4],iph->daddr.s6_addr16[5],iph->daddr.s6_addr16[6],iph->daddr.s6_addr16[7]);
++
++					if (memcmp(&iph->saddr, "\x0\x0\x0\x0\x0\x0\x0\x0\x0\x0\x0\x0\x0\x0\x0\x0", 16)) {
++						__nat25_generate_ipv6_network_addr(networkAddr, (unsigned int *)&iph->saddr);
++						__nat25_db_network_insert(priv, skb->data+ETH_ALEN, networkAddr);
++						__nat25_db_print(priv);
++
++						if (iph->nexthdr == IPPROTO_ICMPV6 && 
++								skb->len > (ETH_HLEN +  sizeof(*iph) + 4)) {
++							if (update_nd_link_layer_addr(skb->data + ETH_HLEN + sizeof(*iph), 
++                                                                skb->len - ETH_HLEN - sizeof(*iph), GET_MY_HWADDR(priv))) {                                                   
++								struct icmp6hdr  *hdr = (struct icmp6hdr *)(skb->data + ETH_HLEN + sizeof(*iph));
++								hdr->icmp6_cksum = 0;
++								hdr->icmp6_cksum = csum_ipv6_magic(&iph->saddr, &iph->daddr,
++												iph->payload_len,
++												IPPROTO_ICMPV6,
++												csum_partial((__u8 *)hdr, iph->payload_len, 0));
++							}
++						}						
++					}
++				}
++				return 0;
++
++			case NAT25_LOOKUP:
++				DEBUG_INFO("NAT25: Lookup IP, SA=%4x:%4x:%4x:%4x:%4x:%4x:%4x:%4x,"
++								" DA=%4x:%4x:%4x:%4x:%4x:%4x:%4x:%4x\n", 
++						iph->saddr.s6_addr16[0],iph->saddr.s6_addr16[1],iph->saddr.s6_addr16[2],iph->saddr.s6_addr16[3],
++						iph->saddr.s6_addr16[4],iph->saddr.s6_addr16[5],iph->saddr.s6_addr16[6],iph->saddr.s6_addr16[7],
++						iph->daddr.s6_addr16[0],iph->daddr.s6_addr16[1],iph->daddr.s6_addr16[2],iph->daddr.s6_addr16[3],
++						iph->daddr.s6_addr16[4],iph->daddr.s6_addr16[5],iph->daddr.s6_addr16[6],iph->daddr.s6_addr16[7]);
++			
++
++				__nat25_generate_ipv6_network_addr(networkAddr, (unsigned int *)&iph->daddr);
++				if (!__nat25_db_network_lookup_and_replace(priv, skb, networkAddr)) {
++#ifdef SUPPORT_RX_UNI2MCAST							
++					if (iph->daddr.s6_addr[0] == 0xff)
++						convert_ipv6_mac_to_mc(skb);	
++#endif											
++				}
++				return 0;
++
++			default:
++				return -1;
++		}
++	}
++#endif	// CL_IPV6_PASS
++
++	return -1;
++}
++
++
++int nat25_handle_frame(_adapter *priv, struct sk_buff *skb)
++{
++#ifdef BR_EXT_DEBUG
++	if((!priv->ethBrExtInfo.nat25_disable) && (!(skb->data[0] & 1)))
++	{
++		panic_printk("NAT25: Input Frame: DA=%02x%02x%02x%02x%02x%02x SA=%02x%02x%02x%02x%02x%02x\n",
++			skb->data[0],
++			skb->data[1],
++			skb->data[2],
++			skb->data[3],
++			skb->data[4],
++			skb->data[5],
++			skb->data[6],
++			skb->data[7],
++			skb->data[8],
++			skb->data[9],
++			skb->data[10],
++			skb->data[11]);
++	}
++#endif
++
++	if(!(skb->data[0] & 1))
++	{
++		int is_vlan_tag=0, i, retval=0;
++		unsigned short vlan_hdr=0;
++
++		if (*((unsigned short *)(skb->data+ETH_ALEN*2)) == __constant_htons(ETH_P_8021Q)) {
++			is_vlan_tag = 1;
++			vlan_hdr = *((unsigned short *)(skb->data+ETH_ALEN*2+2));
++			for (i=0; i<6; i++)
++				*((unsigned short *)(skb->data+ETH_ALEN*2+2-i*2)) = *((unsigned short *)(skb->data+ETH_ALEN*2-2-i*2));
++			skb_pull(skb, 4);
++		}
++
++		if (!priv->ethBrExtInfo.nat25_disable)
++		{
++			_irqL irqL;
++			_enter_critical_bh(&priv->br_ext_lock, &irqL);
++			/*
++			 *	This function look up the destination network address from
++			 *	the NAT2.5 database. Return value = -1 means that the
++			 *	corresponding network protocol is NOT support.
++			 */
++			if (!priv->ethBrExtInfo.nat25sc_disable &&
++				(*((unsigned short *)(skb->data+ETH_ALEN*2)) == __constant_htons(ETH_P_IP)) &&
++				!memcmp(priv->scdb_ip, skb->data+ETH_HLEN+16, 4)) {
++				memcpy(skb->data, priv->scdb_mac, ETH_ALEN);
++				
++				_exit_critical_bh(&priv->br_ext_lock, &irqL);
++			}
++			else {
++				_exit_critical_bh(&priv->br_ext_lock, &irqL);
++				
++				retval = nat25_db_handle(priv, skb, NAT25_LOOKUP);
++			}
++		}
++		else {
++			if (((*((unsigned short *)(skb->data+ETH_ALEN*2)) == __constant_htons(ETH_P_IP)) &&
++					!memcmp(priv->br_ip, skb->data+ETH_HLEN+16, 4)) ||
++				((*((unsigned short *)(skb->data+ETH_ALEN*2)) == __constant_htons(ETH_P_ARP)) &&
++					!memcmp(priv->br_ip, skb->data+ETH_HLEN+24, 4))) {
++				// for traffic to upper TCP/IP
++				retval = nat25_db_handle(priv, skb, NAT25_LOOKUP);
++			}
++		}
++
++		if (is_vlan_tag) {
++			skb_push(skb, 4);
++			for (i=0; i<6; i++)
++				*((unsigned short *)(skb->data+i*2)) = *((unsigned short *)(skb->data+4+i*2));
++			*((unsigned short *)(skb->data+ETH_ALEN*2)) = __constant_htons(ETH_P_8021Q);
++			*((unsigned short *)(skb->data+ETH_ALEN*2+2)) = vlan_hdr;
++		}
++
++		if(retval == -1) {
++			//DEBUG_ERR("NAT25: Lookup fail!\n");
++			return -1;
++		}
++	}
++
++	return 0;
++}
++
++#if 0
++void mac_clone(_adapter *priv, unsigned char *addr)
++{
++	struct sockaddr sa;
++
++	memcpy(sa.sa_data, addr, ETH_ALEN);
++	DEBUG_INFO("MAC Clone: Addr=%02x%02x%02x%02x%02x%02x\n",
++		addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]);
++	rtl8192cd_set_hwaddr(priv->dev, &sa);
++}
++
++
++int mac_clone_handle_frame(_adapter *priv, struct sk_buff *skb)
++{
++	if(priv->ethBrExtInfo.macclone_enable && !priv->macclone_completed)
++	{
++		if(!(skb->data[ETH_ALEN] & 1))	//// check any other particular MAC add
++		{
++                        if(memcmp(skb->data+ETH_ALEN, GET_MY_HWADDR(priv), ETH_ALEN) &&
++				((priv->dev->br_port) &&
++				 memcmp(skb->data+ETH_ALEN, priv->br_mac, ETH_ALEN)))
++			{
++				mac_clone(priv, skb->data+ETH_ALEN);
++				priv->macclone_completed = 1;
++			}
++		}
++	}
++
++	return 0;
++}
++#endif // 0
++
++#define SERVER_PORT			67
++#define CLIENT_PORT			68
++#define DHCP_MAGIC			0x63825363
++#define BROADCAST_FLAG		0x8000
++
++struct dhcpMessage {
++	u_int8_t op;
++	u_int8_t htype;
++	u_int8_t hlen;
++	u_int8_t hops;
++	u_int32_t xid;
++	u_int16_t secs;
++	u_int16_t flags;
++	u_int32_t ciaddr;
++	u_int32_t yiaddr;
++	u_int32_t siaddr;
++	u_int32_t giaddr;
++	u_int8_t chaddr[16];
++	u_int8_t sname[64];
++	u_int8_t file[128];
++	u_int32_t cookie;
++	u_int8_t options[308]; /* 312 - cookie */
++};
++
++void dhcp_flag_bcast(_adapter *priv, struct sk_buff *skb)
++{
++	if(skb == NULL)
++		return;
++
++	if(!priv->ethBrExtInfo.dhcp_bcst_disable)
++	{
++		unsigned short protocol = *((unsigned short *)(skb->data + 2 * ETH_ALEN));
++
++		if(protocol == __constant_htons(ETH_P_IP)) // IP
++		{
++			struct iphdr* iph = (struct iphdr *)(skb->data + ETH_HLEN);
++
++			if(iph->protocol == IPPROTO_UDP) // UDP
++			{
++				struct udphdr *udph = (struct udphdr *)((SIZE_PTR)iph + (iph->ihl << 2));
++
++				if((udph->source == __constant_htons(CLIENT_PORT))
++					&& (udph->dest == __constant_htons(SERVER_PORT))) // DHCP request
++				{
++					struct dhcpMessage *dhcph =
++						(struct dhcpMessage *)((SIZE_PTR)udph + sizeof(struct udphdr));
++
++					if(dhcph->cookie == __constant_htonl(DHCP_MAGIC)) // match magic word
++					{
++						if(!(dhcph->flags & htons(BROADCAST_FLAG))) // if not broadcast
++						{
++							register int sum = 0;
++
++							DEBUG_INFO("DHCP: change flag of DHCP request to broadcast.\n");
++							// or BROADCAST flag
++							dhcph->flags |= htons(BROADCAST_FLAG);
++							// recalculate checksum
++							sum = ~(udph->check) & 0xffff;
++							sum += dhcph->flags;
++							while(sum >> 16)
++								sum = (sum & 0xffff) + (sum >> 16);
++							udph->check = ~sum;
++						}
++					}
++				}
++			}
++		}
++	}
++}
++
++
++void *scdb_findEntry(_adapter *priv, unsigned char *macAddr,
++				unsigned char *ipAddr)
++{
++	unsigned char networkAddr[MAX_NETWORK_ADDR_LEN];
++	struct nat25_network_db_entry *db;
++	int hash;
++	//_irqL irqL;
++	//_enter_critical_bh(&priv->br_ext_lock, &irqL);
++
++	__nat25_generate_ipv4_network_addr(networkAddr, (unsigned int *)ipAddr);
++	hash = __nat25_network_hash(networkAddr);
++	db = priv->nethash[hash];
++	while (db != NULL)
++	{
++		if(!memcmp(db->networkAddr, networkAddr, MAX_NETWORK_ADDR_LEN)) {
++			//_exit_critical_bh(&priv->br_ext_lock, &irqL);
++			return (void *)db;
++		}
++
++		db = db->next_hash;
++	}
++
++	//_exit_critical_bh(&priv->br_ext_lock, &irqL);
++	return NULL;
++}
++
++#endif	// CONFIG_BR_EXT
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_cmd.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_cmd.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_cmd.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_cmd.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,3035 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _RTW_CMD_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <recv_osdep.h>
++#include <cmd_osdep.h>
++#include <mlme_osdep.h>
++#include <rtw_byteorder.h>
++#ifdef CONFIG_BR_EXT
++#include <rtw_br_ext.h>
++#endif //CONFIG_BR_EXT
++/*
++Caller and the rtw_cmd_thread can protect cmd_q by spin_lock.
++No irqsave is necessary.
++*/
++
++sint	_rtw_init_cmd_priv (struct	cmd_priv *pcmdpriv)
++{
++	sint res=_SUCCESS;
++	
++_func_enter_;	
++
++	_rtw_init_sema(&(pcmdpriv->cmd_queue_sema), 0);
++	//_rtw_init_sema(&(pcmdpriv->cmd_done_sema), 0);
++	_rtw_init_sema(&(pcmdpriv->terminate_cmdthread_sema), 0);
++	
++	
++	_rtw_init_queue(&(pcmdpriv->cmd_queue));
++	
++	//allocate DMA-able/Non-Page memory for cmd_buf and rsp_buf
++	
++	pcmdpriv->cmd_seq = 1;
++	
++	pcmdpriv->cmd_allocated_buf = rtw_zmalloc(MAX_CMDSZ + CMDBUFF_ALIGN_SZ);
++	
++	if (pcmdpriv->cmd_allocated_buf == NULL){
++		res= _FAIL;
++		goto exit;
++	}
++	
++	pcmdpriv->cmd_buf = pcmdpriv->cmd_allocated_buf  +  CMDBUFF_ALIGN_SZ - ( (SIZE_PTR)(pcmdpriv->cmd_allocated_buf) & (CMDBUFF_ALIGN_SZ-1));
++		
++	pcmdpriv->rsp_allocated_buf = rtw_zmalloc(MAX_RSPSZ + 4);
++	
++	if (pcmdpriv->rsp_allocated_buf == NULL){
++		res= _FAIL;
++		goto exit;
++	}
++	
++	pcmdpriv->rsp_buf = pcmdpriv->rsp_allocated_buf  +  4 - ( (SIZE_PTR)(pcmdpriv->rsp_allocated_buf) & 3);
++
++	pcmdpriv->cmd_issued_cnt = pcmdpriv->cmd_done_cnt = pcmdpriv->rsp_cnt = 0;
++
++exit:
++	
++_func_exit_;	  
++
++	return res;
++	
++}	
++
++#ifdef CONFIG_C2H_WK
++static void c2h_wk_callback(_workitem *work);
++#endif
++sint _rtw_init_evt_priv(struct evt_priv *pevtpriv)
++{
++	sint res=_SUCCESS;
++
++_func_enter_;	
++
++#ifdef CONFIG_H2CLBK
++	_rtw_init_sema(&(pevtpriv->lbkevt_done), 0);
++	pevtpriv->lbkevt_limit = 0;
++	pevtpriv->lbkevt_num = 0;
++	pevtpriv->cmdevt_parm = NULL;		
++#endif		
++	
++	//allocate DMA-able/Non-Page memory for cmd_buf and rsp_buf
++	ATOMIC_SET(&pevtpriv->event_seq, 0);
++	pevtpriv->evt_done_cnt = 0;
++
++#ifdef CONFIG_EVENT_THREAD_MODE
++
++	_rtw_init_sema(&(pevtpriv->evt_notify), 0);
++	_rtw_init_sema(&(pevtpriv->terminate_evtthread_sema), 0);
++
++	pevtpriv->evt_allocated_buf = rtw_zmalloc(MAX_EVTSZ + 4);	
++	if (pevtpriv->evt_allocated_buf == NULL){
++		res= _FAIL;
++		goto exit;
++		}
++	pevtpriv->evt_buf = pevtpriv->evt_allocated_buf  +  4 - ((unsigned int)(pevtpriv->evt_allocated_buf) & 3);
++	
++		
++#ifdef CONFIG_SDIO_HCI
++	pevtpriv->allocated_c2h_mem = rtw_zmalloc(C2H_MEM_SZ +4); 
++	
++	if (pevtpriv->allocated_c2h_mem == NULL){
++		res= _FAIL;
++		goto exit;
++	}
++
++	pevtpriv->c2h_mem = pevtpriv->allocated_c2h_mem +  4\
++	- ( (u32)(pevtpriv->allocated_c2h_mem) & 3);
++#ifdef PLATFORM_OS_XP
++	pevtpriv->pc2h_mdl= IoAllocateMdl((u8 *)pevtpriv->c2h_mem, C2H_MEM_SZ , FALSE, FALSE, NULL);
++	
++	if(pevtpriv->pc2h_mdl == NULL){
++		res= _FAIL;
++		goto exit;
++	}
++	MmBuildMdlForNonPagedPool(pevtpriv->pc2h_mdl);
++#endif
++#endif //end of CONFIG_SDIO_HCI
++
++	_rtw_init_queue(&(pevtpriv->evt_queue));
++
++exit:	
++
++#endif //end of CONFIG_EVENT_THREAD_MODE
++
++#ifdef CONFIG_C2H_WK
++	_init_workitem(&pevtpriv->c2h_wk, c2h_wk_callback, NULL);
++	pevtpriv->c2h_wk_alive = _FALSE;
++	pevtpriv->c2h_queue = rtw_cbuf_alloc(C2H_QUEUE_MAX_LEN+1);
++#endif
++
++_func_exit_;		 
++
++	return res;
++}
++
++void _rtw_free_evt_priv (struct	evt_priv *pevtpriv)
++{
++_func_enter_;
++
++	RT_TRACE(_module_rtl871x_cmd_c_,_drv_info_,("+_rtw_free_evt_priv \n"));
++
++#ifdef CONFIG_EVENT_THREAD_MODE
++	_rtw_free_sema(&(pevtpriv->evt_notify));
++	_rtw_free_sema(&(pevtpriv->terminate_evtthread_sema));
++
++
++	if (pevtpriv->evt_allocated_buf)
++		rtw_mfree(pevtpriv->evt_allocated_buf, MAX_EVTSZ + 4);
++#endif
++
++#ifdef CONFIG_C2H_WK
++	_cancel_workitem_sync(&pevtpriv->c2h_wk);
++	while(pevtpriv->c2h_wk_alive)
++		rtw_msleep_os(10);
++
++	while (!rtw_cbuf_empty(pevtpriv->c2h_queue)) {
++		void *c2h;
++		if ((c2h = rtw_cbuf_pop(pevtpriv->c2h_queue)) != NULL
++			&& c2h != (void *)pevtpriv) {
++			rtw_mfree(c2h, 16);
++		}
++	}
++	rtw_cbuf_free(pevtpriv->c2h_queue);
++#endif
++
++	RT_TRACE(_module_rtl871x_cmd_c_,_drv_info_,("-_rtw_free_evt_priv \n"));
++
++_func_exit_;	  	
++
++}
++
++void _rtw_free_cmd_priv (struct	cmd_priv *pcmdpriv)
++{
++_func_enter_;
++
++	if(pcmdpriv){
++		_rtw_spinlock_free(&(pcmdpriv->cmd_queue.lock));
++		_rtw_free_sema(&(pcmdpriv->cmd_queue_sema));
++		//_rtw_free_sema(&(pcmdpriv->cmd_done_sema));
++		_rtw_free_sema(&(pcmdpriv->terminate_cmdthread_sema));
++
++		if (pcmdpriv->cmd_allocated_buf)
++			rtw_mfree(pcmdpriv->cmd_allocated_buf, MAX_CMDSZ + CMDBUFF_ALIGN_SZ);
++		
++		if (pcmdpriv->rsp_allocated_buf)
++			rtw_mfree(pcmdpriv->rsp_allocated_buf, MAX_RSPSZ + 4);
++	}
++_func_exit_;		
++}
++
++/*
++Calling Context:
++
++rtw_enqueue_cmd can only be called between kernel thread, 
++since only spin_lock is used.
++
++ISR/Call-Back functions can't call this sub-function.
++
++*/
++
++sint	_rtw_enqueue_cmd(_queue *queue, struct cmd_obj *obj)
++{
++	_irqL irqL;
++
++_func_enter_;
++
++	if (obj == NULL)
++		goto exit;
++
++	//_enter_critical_bh(&queue->lock, &irqL);
++	_enter_critical(&queue->lock, &irqL);	
++
++	rtw_list_insert_tail(&obj->list, &queue->queue);
++
++	//_exit_critical_bh(&queue->lock, &irqL);	
++	_exit_critical(&queue->lock, &irqL);
++
++exit:	
++
++_func_exit_;
++
++	return _SUCCESS;
++}
++
++struct	cmd_obj	*_rtw_dequeue_cmd(_queue *queue)
++{
++	_irqL irqL;
++	struct cmd_obj *obj;
++
++_func_enter_;
++
++	//_enter_critical_bh(&(queue->lock), &irqL);
++	_enter_critical(&queue->lock, &irqL);
++	if (rtw_is_list_empty(&(queue->queue)))
++		obj = NULL;
++	else
++	{
++		obj = LIST_CONTAINOR(get_next(&(queue->queue)), struct cmd_obj, list);
++		rtw_list_delete(&obj->list);
++	}
++
++	//_exit_critical_bh(&(queue->lock), &irqL);
++	_exit_critical(&queue->lock, &irqL);
++
++_func_exit_;	
++
++	return obj;
++}
++
++u32	rtw_init_cmd_priv(struct cmd_priv *pcmdpriv)
++{
++	u32	res;
++_func_enter_;	
++	res = _rtw_init_cmd_priv (pcmdpriv);
++_func_exit_;	
++	return res;	
++}
++
++u32	rtw_init_evt_priv (struct	evt_priv *pevtpriv)
++{
++	int	res;
++_func_enter_;		
++	res = _rtw_init_evt_priv(pevtpriv);
++_func_exit_;		
++	return res;
++}
++
++void rtw_free_evt_priv (struct	evt_priv *pevtpriv)
++{
++_func_enter_;
++	RT_TRACE(_module_rtl871x_cmd_c_,_drv_info_,("rtw_free_evt_priv\n"));
++	_rtw_free_evt_priv(pevtpriv);
++_func_exit_;		
++}	
++
++void rtw_free_cmd_priv (struct	cmd_priv *pcmdpriv)
++{
++_func_enter_;
++	RT_TRACE(_module_rtl871x_cmd_c_,_drv_info_,("rtw_free_cmd_priv\n"));
++	_rtw_free_cmd_priv(pcmdpriv);
++_func_exit_;	
++}	
++
++int rtw_cmd_filter(struct cmd_priv *pcmdpriv, struct cmd_obj *cmd_obj);
++int rtw_cmd_filter(struct cmd_priv *pcmdpriv, struct cmd_obj *cmd_obj)
++{
++	u8 bAllow = _FALSE; //set to _TRUE to allow enqueuing cmd when hw_init_completed is _FALSE
++	
++	#ifdef SUPPORT_HW_RFOFF_DETECTED
++	//To decide allow or not
++	if(	(pcmdpriv->padapter->pwrctrlpriv.bHWPwrPindetect)
++		&&(!pcmdpriv->padapter->registrypriv.usbss_enable)
++	)		
++	{
++		if(cmd_obj->cmdcode == GEN_CMD_CODE(_Set_Drv_Extra) ) 
++		{
++			struct drvextra_cmd_parm	*pdrvextra_cmd_parm = (struct drvextra_cmd_parm	*)cmd_obj->parmbuf;	
++			if(pdrvextra_cmd_parm->ec_id == POWER_SAVING_CTRL_WK_CID)
++			{	
++				//DBG_871X("==>enqueue POWER_SAVING_CTRL_WK_CID\n");
++				bAllow = _TRUE;	
++			}
++		}
++	}
++	#endif
++
++	if(cmd_obj->cmdcode == GEN_CMD_CODE(_SetChannelPlan))
++		bAllow = _TRUE;
++
++	if( (pcmdpriv->padapter->hw_init_completed ==_FALSE && bAllow == _FALSE)
++		|| pcmdpriv->cmdthd_running== _FALSE	//com_thread not running
++	)
++	{
++		//DBG_871X("%s:%s: drop cmdcode:%u, hw_init_completed:%u, cmdthd_running:%u\n", caller_func, __FUNCTION__,
++		//	cmd_obj->cmdcode,
++		//	pcmdpriv->padapter->hw_init_completed,
++		//	pcmdpriv->cmdthd_running
++		//);
++
++		return _FAIL;
++	}	
++	return _SUCCESS;
++}
++
++
++
++u32 rtw_enqueue_cmd(struct cmd_priv *pcmdpriv, struct cmd_obj *cmd_obj)
++{
++	int res = _FAIL;
++	PADAPTER padapter = pcmdpriv->padapter;
++	
++_func_enter_;	
++	
++	if (cmd_obj == NULL) {
++		goto exit;
++	}
++
++	cmd_obj->padapter = padapter;
++
++#ifdef CONFIG_CONCURRENT_MODE
++	//change pcmdpriv to primary's pcmdpriv
++	if (padapter->adapter_type != PRIMARY_ADAPTER && padapter->pbuddy_adapter)
++		pcmdpriv = &(padapter->pbuddy_adapter->cmdpriv);
++#endif	
++
++	if( _FAIL == (res=rtw_cmd_filter(pcmdpriv, cmd_obj)) ) {
++		rtw_free_cmd_obj(cmd_obj);
++		goto exit;
++	}
++
++	res = _rtw_enqueue_cmd(&pcmdpriv->cmd_queue, cmd_obj);
++
++	if(res == _SUCCESS)
++		_rtw_up_sema(&pcmdpriv->cmd_queue_sema);
++	
++exit:	
++	
++_func_exit_;
++
++	return res;
++}
++
++struct	cmd_obj	*rtw_dequeue_cmd(struct cmd_priv *pcmdpriv)
++{
++	struct cmd_obj *cmd_obj;
++	
++_func_enter_;		
++
++	cmd_obj = _rtw_dequeue_cmd(&pcmdpriv->cmd_queue);
++		
++_func_exit_;			
++	return cmd_obj;
++}
++
++void rtw_cmd_clr_isr(struct	cmd_priv *pcmdpriv)
++{
++_func_enter_;
++	pcmdpriv->cmd_done_cnt++;
++	//_rtw_up_sema(&(pcmdpriv->cmd_done_sema));
++_func_exit_;		
++}
++
++void rtw_free_cmd_obj(struct cmd_obj *pcmd)
++{
++_func_enter_;
++
++	if((pcmd->cmdcode!=_JoinBss_CMD_) &&(pcmd->cmdcode!= _CreateBss_CMD_))
++	{
++		//free parmbuf in cmd_obj
++		rtw_mfree((unsigned char*)pcmd->parmbuf, pcmd->cmdsz);
++	}	
++	
++	if(pcmd->rsp!=NULL)
++	{
++		if(pcmd->rspsz!= 0)
++		{
++			//free rsp in cmd_obj
++			rtw_mfree((unsigned char*)pcmd->rsp, pcmd->rspsz);
++		}	
++	}	
++
++	//free cmd_obj
++	rtw_mfree((unsigned char*)pcmd, sizeof(struct cmd_obj));
++	
++_func_exit_;		
++}
++
++void rtw_stop_cmd_thread(_adapter *adapter)
++{
++	if(adapter->cmdThread && adapter->cmdpriv.cmdthd_running == _TRUE
++		&& adapter->cmdpriv.stop_req == 0)
++	{
++		adapter->cmdpriv.stop_req = 1;
++		_rtw_up_sema(&adapter->cmdpriv.cmd_queue_sema);
++		_rtw_down_sema(&adapter->cmdpriv.terminate_cmdthread_sema);
++	}
++}
++
++thread_return rtw_cmd_thread(thread_context context)
++{
++	u8 ret;
++	struct cmd_obj *pcmd;
++	u8 *pcmdbuf, *prspbuf;
++	u8 (*cmd_hdl)(_adapter *padapter, u8* pbuf);
++	void (*pcmd_callback)(_adapter *dev, struct cmd_obj *pcmd);
++       _adapter *padapter = (_adapter *)context;
++	struct cmd_priv *pcmdpriv = &(padapter->cmdpriv);
++	
++_func_enter_;
++
++	thread_enter("RTW_CMD_THREAD");
++
++	pcmdbuf = pcmdpriv->cmd_buf;
++	prspbuf = pcmdpriv->rsp_buf;
++
++	pcmdpriv->stop_req = 0;
++	pcmdpriv->cmdthd_running=_TRUE;
++	_rtw_up_sema(&pcmdpriv->terminate_cmdthread_sema);
++	
++	RT_TRACE(_module_rtl871x_cmd_c_,_drv_info_,("start r871x rtw_cmd_thread !!!!\n"));
++
++	while(1)
++	{
++		if ((_rtw_down_sema(&(pcmdpriv->cmd_queue_sema))) == _FAIL) {
++			LOG_LEVEL(_drv_err_, FUNC_ADPT_FMT" _rtw_down_sema(&pcmdpriv->cmd_queue_sema) return _FAIL, break\n", FUNC_ADPT_ARG(padapter));
++			break;
++		}
++
++		if (pcmdpriv->stop_req) {
++			LOG_LEVEL(_drv_err_, FUNC_ADPT_FMT" stop_req:%u, break\n", FUNC_ADPT_ARG(padapter), pcmdpriv->stop_req);
++			break;
++		}
++
++#ifdef CONFIG_LPS_LCLK
++		if (rtw_register_cmd_alive(padapter) != _SUCCESS)
++		{
++			continue;
++		}
++#endif
++
++_next:
++		if ((padapter->bDriverStopped == _TRUE)||(padapter->bSurpriseRemoved == _TRUE))
++		{
++			LOG_LEVEL(_drv_err_, "%s: DriverStopped(%d) SurpriseRemoved(%d) break at line %d\n",
++				__FUNCTION__, padapter->bDriverStopped, padapter->bSurpriseRemoved, __LINE__);
++			break;
++		}
++
++		if(!(pcmd = rtw_dequeue_cmd(pcmdpriv))) {
++#ifdef CONFIG_LPS_LCLK
++			rtw_unregister_cmd_alive(padapter);
++#endif
++			continue;
++		}
++
++		if( _FAIL == rtw_cmd_filter(pcmdpriv, pcmd) )
++		{
++			pcmd->res = H2C_DROPPED;
++			goto post_process;					
++		}
++
++		if( _FAIL == rtw_cmd_filter(pcmdpriv, pcmd) ) {
++			rtw_free_cmd_obj(pcmd);
++			continue;
++		}
++
++		pcmdpriv->cmd_issued_cnt++;
++
++		pcmd->cmdsz = _RND4((pcmd->cmdsz));//_RND4
++
++		_rtw_memcpy(pcmdbuf, pcmd->parmbuf, pcmd->cmdsz);
++
++		if(pcmd->cmdcode <= (sizeof(wlancmds) /sizeof(struct cmd_hdl)))
++		{
++			cmd_hdl = wlancmds[pcmd->cmdcode].h2cfuns;
++
++			if (cmd_hdl)
++			{
++				ret = cmd_hdl(pcmd->padapter, pcmdbuf);
++				pcmd->res = ret;
++			}
++
++			pcmdpriv->cmd_seq++;
++		}
++		else
++		{
++			pcmd->res = H2C_PARAMETERS_ERROR;
++		}
++
++		cmd_hdl = NULL;
++
++post_process:
++
++		//call callback function for post-processed
++		if(pcmd->cmdcode <= (sizeof(rtw_cmd_callback) /sizeof(struct _cmd_callback)))
++		{
++			pcmd_callback = rtw_cmd_callback[pcmd->cmdcode].callback;
++			if(pcmd_callback == NULL)
++			{
++				RT_TRACE(_module_rtl871x_cmd_c_,_drv_info_,("mlme_cmd_hdl(): pcmd_callback=0x%p, cmdcode=0x%x\n", pcmd_callback, pcmd->cmdcode));
++				rtw_free_cmd_obj(pcmd);
++			}
++			else
++			{
++				//todo: !!! fill rsp_buf to pcmd->rsp if (pcmd->rsp!=NULL)
++				pcmd_callback(pcmd->padapter, pcmd);//need conider that free cmd_obj in rtw_cmd_callback
++			}
++		}
++
++		flush_signals_thread();
++
++		goto _next;
++
++	}
++	pcmdpriv->cmdthd_running=_FALSE;
++
++
++	// free all cmd_obj resources
++	do{
++		pcmd = rtw_dequeue_cmd(pcmdpriv);
++		if(pcmd==NULL)
++			break;
++
++		//DBG_871X("%s: leaving... drop cmdcode:%u\n", __FUNCTION__, pcmd->cmdcode);
++
++		rtw_free_cmd_obj(pcmd);	
++	}while(1);
++
++	_rtw_up_sema(&pcmdpriv->terminate_cmdthread_sema);
++
++_func_exit_;
++
++	thread_exit();
++
++}
++
++
++#ifdef CONFIG_EVENT_THREAD_MODE
++u32 rtw_enqueue_evt(struct evt_priv *pevtpriv, struct evt_obj *obj)
++{
++	_irqL irqL;
++	int	res;
++	_queue *queue = &pevtpriv->evt_queue;
++	
++_func_enter_;	
++
++	res = _SUCCESS; 		
++
++	if (obj == NULL) {
++		res = _FAIL;
++		goto exit;
++	}	
++
++	_enter_critical_bh(&queue->lock, &irqL);
++
++	rtw_list_insert_tail(&obj->list, &queue->queue);
++	
++	_exit_critical_bh(&queue->lock, &irqL);
++
++	//rtw_evt_notify_isr(pevtpriv);
++
++exit:
++	
++_func_exit_;		
++
++	return res;	
++}
++
++struct evt_obj *rtw_dequeue_evt(_queue *queue)
++{
++	_irqL irqL;
++	struct	evt_obj	*pevtobj;
++	
++_func_enter_;		
++
++	_enter_critical_bh(&queue->lock, &irqL);
++
++	if (rtw_is_list_empty(&(queue->queue)))
++		pevtobj = NULL;
++	else
++	{
++		pevtobj = LIST_CONTAINOR(get_next(&(queue->queue)), struct evt_obj, list);
++		rtw_list_delete(&pevtobj->list);
++	}
++
++	_exit_critical_bh(&queue->lock, &irqL);
++	
++_func_exit_;			
++
++	return pevtobj;	
++}
++
++void rtw_free_evt_obj(struct evt_obj *pevtobj)
++{
++_func_enter_;
++
++	if(pevtobj->parmbuf)
++		rtw_mfree((unsigned char*)pevtobj->parmbuf, pevtobj->evtsz);
++	
++	rtw_mfree((unsigned char*)pevtobj, sizeof(struct evt_obj));
++	
++_func_exit_;		
++}
++
++void rtw_evt_notify_isr(struct evt_priv *pevtpriv)
++{
++_func_enter_;
++	pevtpriv->evt_done_cnt++;
++	_rtw_up_sema(&(pevtpriv->evt_notify));
++_func_exit_;	
++}
++#endif
++
++
++/*
++u8 rtw_setstandby_cmd(unsigned char  *adapter) 
++*/
++u8 rtw_setstandby_cmd(_adapter *padapter, uint action)
++{
++	struct cmd_obj*			ph2c;
++	struct usb_suspend_parm*	psetusbsuspend;
++	struct cmd_priv 			*pcmdpriv=&padapter->cmdpriv;
++
++	u8 ret = _SUCCESS;
++	
++_func_enter_;	
++
++	ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));
++	if (ph2c == NULL) {
++		ret = _FAIL;
++		goto exit;
++	}
++	
++	psetusbsuspend = (struct usb_suspend_parm*)rtw_zmalloc(sizeof(struct usb_suspend_parm)); 
++	if (psetusbsuspend == NULL) {
++		rtw_mfree((u8 *) ph2c, sizeof(struct	cmd_obj));
++		ret = _FAIL;
++		goto exit;
++	}
++
++	psetusbsuspend->action = action;
++
++	init_h2fwcmd_w_parm_no_rsp(ph2c, psetusbsuspend, GEN_CMD_CODE(_SetUsbSuspend));
++
++	ret = rtw_enqueue_cmd(pcmdpriv, ph2c);	
++	
++exit:	
++	
++_func_exit_;		
++
++	return ret;
++}
++
++/*
++rtw_sitesurvey_cmd(~)
++	### NOTE:#### (!!!!)
++	MUST TAKE CARE THAT BEFORE CALLING THIS FUNC, YOU SHOULD HAVE LOCKED pmlmepriv->lock
++*/
++u8 rtw_sitesurvey_cmd(_adapter  *padapter, NDIS_802_11_SSID *ssid, int ssid_num,
++	struct rtw_ieee80211_channel *ch, int ch_num)
++{
++	u8 res = _FAIL;
++	struct cmd_obj		*ph2c;
++	struct sitesurvey_parm	*psurveyPara;
++	struct cmd_priv 	*pcmdpriv = &padapter->cmdpriv;
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++
++_func_enter_;
++
++#ifdef CONFIG_LPS
++	if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE){
++		rtw_lps_ctrl_wk_cmd(padapter, LPS_CTRL_SCAN, 1);
++	}
++#endif
++
++#ifdef CONFIG_P2P_PS
++	if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) {
++		p2p_ps_wk_cmd(padapter, P2P_PS_SCAN, 1);
++	}
++#endif // CONFIG_P2P_PS
++
++	ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));
++	if (ph2c == NULL)
++		return _FAIL;
++
++	psurveyPara = (struct sitesurvey_parm*)rtw_zmalloc(sizeof(struct sitesurvey_parm)); 
++	if (psurveyPara == NULL) {
++		rtw_mfree((unsigned char*) ph2c, sizeof(struct cmd_obj));
++		return _FAIL;
++	}
++
++	rtw_free_network_queue(padapter, _FALSE);
++
++	RT_TRACE(_module_rtl871x_cmd_c_, _drv_info_, ("\nflush  network queue\n\n"));
++
++	init_h2fwcmd_w_parm_no_rsp(ph2c, psurveyPara, GEN_CMD_CODE(_SiteSurvey));
++
++	/* psurveyPara->bsslimit = 48; */
++	psurveyPara->scan_mode = pmlmepriv->scan_mode;
++
++	/* prepare ssid list */
++	if (ssid) {
++		int i;
++		for (i=0; i<ssid_num && i< RTW_SSID_SCAN_AMOUNT; i++) {
++			if (ssid[i].SsidLength) {
++				_rtw_memcpy(&psurveyPara->ssid[i], &ssid[i], sizeof(NDIS_802_11_SSID));
++				psurveyPara->ssid_num++;
++				if (0)
++				DBG_871X(FUNC_ADPT_FMT" ssid:(%s, %d)\n", FUNC_ADPT_ARG(padapter),
++					psurveyPara->ssid[i].Ssid, psurveyPara->ssid[i].SsidLength);
++			}
++		}
++	}
++
++	/* prepare channel list */
++	if (ch) {
++		int i;
++		for (i=0; i<ch_num && i< RTW_CHANNEL_SCAN_AMOUNT; i++) {
++			if (ch[i].hw_value && !(ch[i].flags & RTW_IEEE80211_CHAN_DISABLED)) {
++				_rtw_memcpy(&psurveyPara->ch[i], &ch[i], sizeof(struct rtw_ieee80211_channel));
++				psurveyPara->ch_num++;
++				if (0)
++				DBG_871X(FUNC_ADPT_FMT" ch:%u\n", FUNC_ADPT_ARG(padapter),
++					psurveyPara->ch[i].hw_value);
++			}
++		}
++	}
++
++	set_fwstate(pmlmepriv, _FW_UNDER_SURVEY);
++
++	res = rtw_enqueue_cmd(pcmdpriv, ph2c);
++
++	if(res == _SUCCESS) {
++
++		pmlmepriv->scan_start_time = rtw_get_current_time();
++
++#ifdef CONFIG_STA_MODE_SCAN_UNDER_AP_MODE
++		if (padapter->pbuddy_adapter == NULL )
++			goto full_scan_timeout;
++		if((padapter->pbuddy_adapter->mlmeextpriv.mlmext_info.state&0x03) == WIFI_FW_AP_STATE)
++			_set_timer(&pmlmepriv->scan_to_timer, 
++				SURVEY_TO * ( padapter->mlmeextpriv.max_chan_nums + ( padapter->mlmeextpriv.max_chan_nums  / RTW_SCAN_NUM_OF_CH ) * RTW_STAY_AP_CH_MILLISECOND ) + 1000 );
++		else
++#endif //CONFIG_STA_MODE_SCAN_UNDER_AP_MODE
++full_scan_timeout:
++			_set_timer(&pmlmepriv->scan_to_timer, SCANNING_TIMEOUT);
++
++		rtw_led_control(padapter, LED_CTL_SITE_SURVEY);
++
++		pmlmepriv->scan_interval = SCAN_INTERVAL;// 30*2 sec = 60sec
++	} else {
++		_clr_fwstate_(pmlmepriv, _FW_UNDER_SURVEY);
++	}
++
++_func_exit_;		
++
++	return res;
++}
++
++u8 rtw_setdatarate_cmd(_adapter *padapter, u8 *rateset)
++{
++	struct cmd_obj*			ph2c;
++	struct setdatarate_parm*	pbsetdataratepara;
++	struct cmd_priv*		pcmdpriv = &padapter->cmdpriv;
++	u8	res = _SUCCESS;
++
++_func_enter_;	
++
++	ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));
++	if (ph2c == NULL) {
++		res = _FAIL;
++		goto exit;
++	}
++
++	pbsetdataratepara = (struct setdatarate_parm*)rtw_zmalloc(sizeof(struct setdatarate_parm)); 
++	if (pbsetdataratepara == NULL) {
++		rtw_mfree((u8 *) ph2c, sizeof(struct cmd_obj));
++		res = _FAIL;
++		goto exit;
++	}
++
++	init_h2fwcmd_w_parm_no_rsp(ph2c, pbsetdataratepara, GEN_CMD_CODE(_SetDataRate));
++#ifdef MP_FIRMWARE_OFFLOAD
++	pbsetdataratepara->curr_rateidx = *(u32*)rateset;
++//	_rtw_memcpy(pbsetdataratepara, rateset, sizeof(u32));
++#else
++	pbsetdataratepara->mac_id = 5;
++	_rtw_memcpy(pbsetdataratepara->datarates, rateset, NumRates);
++#endif
++	res = rtw_enqueue_cmd(pcmdpriv, ph2c);
++exit:
++
++_func_exit_;
++
++	return res;
++}
++
++u8 rtw_setbasicrate_cmd(_adapter *padapter, u8 *rateset)
++{
++	struct cmd_obj*			ph2c;
++	struct setbasicrate_parm*	pssetbasicratepara;
++	struct cmd_priv*		pcmdpriv=&padapter->cmdpriv;
++	u8	res = _SUCCESS;
++
++_func_enter_;
++
++	ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));
++	if (ph2c == NULL) {
++		res= _FAIL;
++		goto exit;
++	}
++	pssetbasicratepara = (struct setbasicrate_parm*)rtw_zmalloc(sizeof(struct setbasicrate_parm)); 
++
++	if (pssetbasicratepara == NULL) {
++		rtw_mfree((u8*) ph2c, sizeof(struct cmd_obj));
++		res = _FAIL;
++		goto exit;
++	}
++
++	init_h2fwcmd_w_parm_no_rsp(ph2c, pssetbasicratepara, _SetBasicRate_CMD_);
++
++	_rtw_memcpy(pssetbasicratepara->basicrates, rateset, NumRates);	   
++
++	res = rtw_enqueue_cmd(pcmdpriv, ph2c);	
++exit:	
++
++_func_exit_;		
++
++	return res;
++}
++
++
++/*
++unsigned char rtw_setphy_cmd(unsigned char  *adapter) 
++
++1.  be called only after rtw_update_registrypriv_dev_network( ~) or mp testing program
++2.  for AdHoc/Ap mode or mp mode?
++
++*/
++u8 rtw_setphy_cmd(_adapter *padapter, u8 modem, u8 ch)
++{
++	struct cmd_obj*			ph2c;
++	struct setphy_parm*		psetphypara;
++	struct cmd_priv 			*pcmdpriv=&padapter->cmdpriv;
++//	struct mlme_priv			*pmlmepriv = &padapter->mlmepriv;
++//	struct registry_priv*		pregistry_priv = &padapter->registrypriv;
++	u8	res=_SUCCESS;
++
++_func_enter_;	
++
++	ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));
++	if(ph2c==NULL){
++		res= _FAIL;
++		goto exit;
++		}
++	psetphypara = (struct setphy_parm*)rtw_zmalloc(sizeof(struct setphy_parm)); 
++
++	if(psetphypara==NULL){
++		rtw_mfree((u8 *) ph2c, sizeof(struct	cmd_obj));
++		res= _FAIL;
++		goto exit;
++	}
++
++	init_h2fwcmd_w_parm_no_rsp(ph2c, psetphypara, _SetPhy_CMD_);
++
++	RT_TRACE(_module_rtl871x_cmd_c_,_drv_info_,("CH=%d, modem=%d", ch, modem));
++
++	psetphypara->modem = modem;
++	psetphypara->rfchannel = ch;
++
++	res = rtw_enqueue_cmd(pcmdpriv, ph2c);	
++exit:	
++_func_exit_;		
++	return res;
++}
++
++u8 rtw_setbbreg_cmd(_adapter*padapter, u8 offset, u8 val)
++{	
++	struct cmd_obj*			ph2c;
++	struct writeBB_parm*		pwritebbparm;
++	struct cmd_priv 			*pcmdpriv=&padapter->cmdpriv;	
++	u8	res=_SUCCESS;
++_func_enter_;
++	ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));
++	if(ph2c==NULL){
++		res= _FAIL;
++		goto exit;
++		}
++	pwritebbparm = (struct writeBB_parm*)rtw_zmalloc(sizeof(struct writeBB_parm)); 
++
++	if(pwritebbparm==NULL){
++		rtw_mfree((u8 *) ph2c, sizeof(struct	cmd_obj));
++		res= _FAIL;
++		goto exit;
++	}
++
++	init_h2fwcmd_w_parm_no_rsp(ph2c, pwritebbparm, GEN_CMD_CODE(_SetBBReg));	
++
++	pwritebbparm->offset = offset;
++	pwritebbparm->value = val;
++
++	res = rtw_enqueue_cmd(pcmdpriv, ph2c);	
++exit:	
++_func_exit_;	
++	return res;
++}
++
++u8 rtw_getbbreg_cmd(_adapter  *padapter, u8 offset, u8 *pval)
++{	
++	struct cmd_obj*			ph2c;
++	struct readBB_parm*		prdbbparm;
++	struct cmd_priv 			*pcmdpriv=&padapter->cmdpriv;
++	u8	res=_SUCCESS;
++	
++_func_enter_;
++	ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));
++	if(ph2c==NULL){
++		res=_FAIL;
++		goto exit;
++		}
++	prdbbparm = (struct readBB_parm*)rtw_zmalloc(sizeof(struct readBB_parm)); 
++
++	if(prdbbparm ==NULL){
++		rtw_mfree((unsigned char *) ph2c, sizeof(struct	cmd_obj));
++		return _FAIL;
++	}
++
++	_rtw_init_listhead(&ph2c->list);
++	ph2c->cmdcode =GEN_CMD_CODE(_GetBBReg);
++	ph2c->parmbuf = (unsigned char *)prdbbparm;
++	ph2c->cmdsz =  sizeof(struct readBB_parm);
++	ph2c->rsp = pval;
++	ph2c->rspsz = sizeof(struct readBB_rsp);
++	
++	prdbbparm ->offset = offset;
++	
++	res = rtw_enqueue_cmd(pcmdpriv, ph2c);	
++exit:
++_func_exit_;	
++	return res;
++}
++
++u8 rtw_setrfreg_cmd(_adapter  *padapter, u8 offset, u32 val)
++{	
++	struct cmd_obj*			ph2c;
++	struct writeRF_parm*		pwriterfparm;
++	struct cmd_priv 			*pcmdpriv=&padapter->cmdpriv;	
++	u8	res=_SUCCESS;
++_func_enter_;
++	ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));
++	if(ph2c==NULL){
++		res= _FAIL;	
++		goto exit;
++	}
++	pwriterfparm = (struct writeRF_parm*)rtw_zmalloc(sizeof(struct writeRF_parm)); 
++
++	if(pwriterfparm==NULL){
++		rtw_mfree((u8 *) ph2c, sizeof(struct	cmd_obj));
++		res= _FAIL;
++		goto exit;
++	}
++
++	init_h2fwcmd_w_parm_no_rsp(ph2c, pwriterfparm, GEN_CMD_CODE(_SetRFReg));	
++
++	pwriterfparm->offset = offset;
++	pwriterfparm->value = val;
++
++	res = rtw_enqueue_cmd(pcmdpriv, ph2c);	
++exit:
++_func_exit_;	
++	return res;
++}
++
++u8 rtw_getrfreg_cmd(_adapter  *padapter, u8 offset, u8 *pval)
++{	
++	struct cmd_obj*			ph2c;
++	struct readRF_parm*		prdrfparm;
++	struct cmd_priv 			*pcmdpriv=&padapter->cmdpriv;	
++	u8	res=_SUCCESS;
++
++_func_enter_;
++
++	ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));
++	if(ph2c==NULL){
++		res= _FAIL;
++		goto exit;
++	}
++
++	prdrfparm = (struct readRF_parm*)rtw_zmalloc(sizeof(struct readRF_parm)); 
++	if(prdrfparm ==NULL){
++		rtw_mfree((u8 *) ph2c, sizeof(struct	cmd_obj));
++		res= _FAIL;
++		goto exit;
++	}
++
++	_rtw_init_listhead(&ph2c->list);
++	ph2c->cmdcode =GEN_CMD_CODE(_GetRFReg);
++	ph2c->parmbuf = (unsigned char *)prdrfparm;
++	ph2c->cmdsz =  sizeof(struct readRF_parm);
++	ph2c->rsp = pval;
++	ph2c->rspsz = sizeof(struct readRF_rsp);
++	
++	prdrfparm ->offset = offset;
++	
++	res = rtw_enqueue_cmd(pcmdpriv, ph2c);	
++
++exit:
++
++_func_exit_;	
++
++	return res;
++}
++
++void rtw_getbbrfreg_cmdrsp_callback(_adapter*	padapter,  struct cmd_obj *pcmd)
++{       
++ _func_enter_;  
++		
++	//rtw_free_cmd_obj(pcmd);
++	rtw_mfree((unsigned char*) pcmd->parmbuf, pcmd->cmdsz);
++	rtw_mfree((unsigned char*) pcmd, sizeof(struct cmd_obj));
++	
++#ifdef CONFIG_MP_INCLUDED	
++	padapter->mppriv.workparam.bcompleted= _TRUE;
++#endif	
++_func_exit_;		
++}
++
++void rtw_readtssi_cmdrsp_callback(_adapter*	padapter,  struct cmd_obj *pcmd)
++{
++ _func_enter_;  
++
++	rtw_mfree((unsigned char*) pcmd->parmbuf, pcmd->cmdsz);
++	rtw_mfree((unsigned char*) pcmd, sizeof(struct cmd_obj));
++	
++#ifdef CONFIG_MP_INCLUDED	
++	padapter->mppriv.workparam.bcompleted= _TRUE;
++#endif
++
++_func_exit_;
++}
++
++u8 rtw_createbss_cmd(_adapter  *padapter)
++{
++	struct cmd_obj*			pcmd;
++	struct cmd_priv 			*pcmdpriv=&padapter->cmdpriv;
++	struct mlme_priv			*pmlmepriv = &padapter->mlmepriv;
++	WLAN_BSSID_EX		*pdev_network = &padapter->registrypriv.dev_network;
++	u8	res=_SUCCESS;
++
++_func_enter_;
++
++	rtw_led_control(padapter, LED_CTL_START_TO_LINK);
++
++	if (pmlmepriv->assoc_ssid.SsidLength == 0){
++		RT_TRACE(_module_rtl871x_cmd_c_,_drv_info_,(" createbss for Any SSid:%s\n",pmlmepriv->assoc_ssid.Ssid));		
++	} else {
++		RT_TRACE(_module_rtl871x_cmd_c_,_drv_info_,(" createbss for SSid:%s\n", pmlmepriv->assoc_ssid.Ssid));
++	}
++		
++	pcmd = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));
++	if(pcmd==NULL){
++		res= _FAIL;
++		goto exit;
++	}
++
++	_rtw_init_listhead(&pcmd->list);
++	pcmd->cmdcode = _CreateBss_CMD_;
++	pcmd->parmbuf = (unsigned char *)pdev_network;
++	pcmd->cmdsz = get_WLAN_BSSID_EX_sz((WLAN_BSSID_EX*)pdev_network);
++	pcmd->rsp = NULL;
++	pcmd->rspsz = 0;	
++	
++	pdev_network->Length = pcmd->cmdsz;	
++
++#ifdef CONFIG_RTL8712
++	//notes: translate IELength & Length after assign the Length to cmdsz;
++	pdev_network->Length = cpu_to_le32(pcmd->cmdsz);
++	pdev_network->IELength = cpu_to_le32(pdev_network->IELength);
++	pdev_network->Ssid.SsidLength = cpu_to_le32(pdev_network->Ssid.SsidLength);
++#endif
++
++	res = rtw_enqueue_cmd(pcmdpriv, pcmd);	
++
++exit:
++
++_func_exit_;	
++
++	return res;
++}
++
++u8 rtw_createbss_cmd_ex(_adapter  *padapter, unsigned char *pbss, unsigned int sz)
++{
++	struct cmd_obj*	pcmd;
++	struct cmd_priv 	*pcmdpriv=&padapter->cmdpriv;
++	u8	res=_SUCCESS;
++	
++_func_enter_;
++			
++	pcmd = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));
++	if(pcmd==NULL){
++		res= _FAIL;
++		goto exit;
++	}
++
++	_rtw_init_listhead(&pcmd->list);
++	pcmd->cmdcode = GEN_CMD_CODE(_CreateBss);
++	pcmd->parmbuf = pbss;
++	pcmd->cmdsz =  sz;
++	pcmd->rsp = NULL;
++	pcmd->rspsz = 0;
++
++	res = rtw_enqueue_cmd(pcmdpriv, pcmd);
++
++exit:
++	
++_func_exit_;	
++
++	return res;	
++}
++
++u8 rtw_joinbss_cmd(_adapter  *padapter, struct wlan_network* pnetwork)
++{
++	u8	*auth, res = _SUCCESS;
++	uint	t_len = 0;
++	WLAN_BSSID_EX		*psecnetwork;
++	struct cmd_obj		*pcmd;
++	struct cmd_priv		*pcmdpriv=&padapter->cmdpriv;
++	struct mlme_priv		*pmlmepriv = &padapter->mlmepriv;
++	struct qos_priv		*pqospriv= &pmlmepriv->qospriv;
++	struct security_priv	*psecuritypriv=&padapter->securitypriv;
++	struct registry_priv	*pregistrypriv = &padapter->registrypriv;
++	struct ht_priv			*phtpriv = &pmlmepriv->htpriv;
++	NDIS_802_11_NETWORK_INFRASTRUCTURE ndis_network_mode = pnetwork->network.InfrastructureMode;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++_func_enter_;
++
++	rtw_led_control(padapter, LED_CTL_START_TO_LINK);
++
++	if (pmlmepriv->assoc_ssid.SsidLength == 0){
++		RT_TRACE(_module_rtl871x_cmd_c_, _drv_info_, ("+Join cmd: Any SSid\n"));
++	} else {
++		RT_TRACE(_module_rtl871x_cmd_c_, _drv_notice_, ("+Join cmd: SSid=[%s]\n", pmlmepriv->assoc_ssid.Ssid));
++	}
++
++	pcmd = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));
++	if(pcmd==NULL){
++		res=_FAIL;
++		RT_TRACE(_module_rtl871x_cmd_c_, _drv_err_, ("rtw_joinbss_cmd: memory allocate for cmd_obj fail!!!\n"));
++		goto exit;
++	}
++	/* // for IEs is pointer 
++	t_len = sizeof (ULONG) + sizeof (NDIS_802_11_MAC_ADDRESS) + 2 + 
++			sizeof (NDIS_802_11_SSID) + sizeof (ULONG) + 
++			sizeof (NDIS_802_11_RSSI) + sizeof (NDIS_802_11_NETWORK_TYPE) + 
++			sizeof (NDIS_802_11_CONFIGURATION) +	
++			sizeof (NDIS_802_11_NETWORK_INFRASTRUCTURE) +   
++			sizeof (NDIS_802_11_RATES_EX)+ sizeof(WLAN_PHY_INFO)+ sizeof (ULONG) + MAX_IE_SZ;
++	*/
++	//for IEs is fix buf size
++	t_len = sizeof(WLAN_BSSID_EX);
++
++
++	//for hidden ap to set fw_state here
++	if (check_fwstate(pmlmepriv, WIFI_STATION_STATE|WIFI_ADHOC_STATE) != _TRUE)
++	{
++		switch(ndis_network_mode)
++		{
++			case Ndis802_11IBSS:
++				set_fwstate(pmlmepriv, WIFI_ADHOC_STATE);
++				break;
++
++			case Ndis802_11Infrastructure:
++				set_fwstate(pmlmepriv, WIFI_STATION_STATE);
++				break;
++
++			case Ndis802_11APMode:
++			case Ndis802_11AutoUnknown:
++			case Ndis802_11InfrastructureMax:
++				break;
++
++		}
++	}
++
++	psecnetwork=(WLAN_BSSID_EX *)&psecuritypriv->sec_bss;
++	if(psecnetwork==NULL)
++	{
++		if(pcmd !=NULL)
++			rtw_mfree((unsigned char *)pcmd, sizeof(struct	cmd_obj));
++		
++		res=_FAIL;
++		
++		RT_TRACE(_module_rtl871x_cmd_c_, _drv_err_, ("rtw_joinbss_cmd :psecnetwork==NULL!!!\n"));
++		
++		goto exit;
++	}
++
++	_rtw_memset(psecnetwork, 0, t_len);
++
++	_rtw_memcpy(psecnetwork, &pnetwork->network, get_WLAN_BSSID_EX_sz(&pnetwork->network));
++	
++	auth=&psecuritypriv->authenticator_ie[0];
++	psecuritypriv->authenticator_ie[0]=(unsigned char)psecnetwork->IELength;
++
++	if((psecnetwork->IELength-12) < (256-1)) {
++		_rtw_memcpy(&psecuritypriv->authenticator_ie[1], &psecnetwork->IEs[12], psecnetwork->IELength-12);
++	} else {
++		_rtw_memcpy(&psecuritypriv->authenticator_ie[1], &psecnetwork->IEs[12], (256-1));
++	}
++	  
++	psecnetwork->IELength = 0;
++	// Added by Albert 2009/02/18
++	// If the the driver wants to use the bssid to create the connection.
++	// If not,  we have to copy the connecting AP's MAC address to it so that
++	// the driver just has the bssid information for PMKIDList searching.
++        
++	if ( pmlmepriv->assoc_by_bssid == _FALSE )
++	{
++		_rtw_memcpy( &pmlmepriv->assoc_bssid[ 0 ], &pnetwork->network.MacAddress[ 0 ], ETH_ALEN );
++	}
++
++	psecnetwork->IELength = rtw_restruct_sec_ie(padapter, &pnetwork->network.IEs[0], &psecnetwork->IEs[0], pnetwork->network.IELength);
++
++
++	pqospriv->qos_option = 0;
++	
++	if(pregistrypriv->wmm_enable)	
++	{	
++		u32 tmp_len;
++		
++		tmp_len = rtw_restruct_wmm_ie(padapter, &pnetwork->network.IEs[0], &psecnetwork->IEs[0], pnetwork->network.IELength, psecnetwork->IELength);	
++
++		if (psecnetwork->IELength != tmp_len)		
++		{
++			psecnetwork->IELength = tmp_len;
++			pqospriv->qos_option = 1; //There is WMM IE in this corresp. beacon
++		}
++		else 
++		{
++			pqospriv->qos_option = 0;//There is no WMM IE in this corresp. beacon
++		}		
++	}	
++
++#ifdef CONFIG_80211N_HT
++	phtpriv->ht_option = _FALSE;
++	if(pregistrypriv->ht_enable)
++	{
++		//	Added by Albert 2010/06/23
++		//	For the WEP mode, we will use the bg mode to do the connection to avoid some IOT issue.
++		//	Especially for Realtek 8192u SoftAP.
++		if (	( padapter->securitypriv.dot11PrivacyAlgrthm != _WEP40_ ) &&
++			( padapter->securitypriv.dot11PrivacyAlgrthm != _WEP104_ ) &&
++			( padapter->securitypriv.dot11PrivacyAlgrthm != _TKIP_ ))
++		{
++			//rtw_restructure_ht_ie
++			rtw_restructure_ht_ie(padapter, &pnetwork->network.IEs[0], &psecnetwork->IEs[0], 
++									pnetwork->network.IELength, &psecnetwork->IELength, (u8)psecnetwork->Configuration.DSConfig );
++		}
++	}
++
++#endif
++
++	pmlmeinfo->assoc_AP_vendor = check_assoc_AP(pnetwork->network.IEs, pnetwork->network.IELength);
++
++	#if 0
++	psecuritypriv->supplicant_ie[0]=(u8)psecnetwork->IELength;
++
++	if(psecnetwork->IELength < (256-1))
++	{
++		_rtw_memcpy(&psecuritypriv->supplicant_ie[1], &psecnetwork->IEs[0], psecnetwork->IELength);
++	}
++	else
++	{
++		_rtw_memcpy(&psecuritypriv->supplicant_ie[1], &psecnetwork->IEs[0], (256-1));
++	}
++	#endif
++	
++	pcmd->cmdsz = get_WLAN_BSSID_EX_sz(psecnetwork);//get cmdsz before endian conversion
++
++#ifdef CONFIG_RTL8712
++	//wlan_network endian conversion	
++	psecnetwork->Length = cpu_to_le32(psecnetwork->Length);
++	psecnetwork->Ssid.SsidLength= cpu_to_le32(psecnetwork->Ssid.SsidLength);
++	psecnetwork->Privacy = cpu_to_le32(psecnetwork->Privacy);
++	psecnetwork->Rssi = cpu_to_le32(psecnetwork->Rssi);
++	psecnetwork->NetworkTypeInUse = cpu_to_le32(psecnetwork->NetworkTypeInUse);
++	psecnetwork->Configuration.ATIMWindow = cpu_to_le32(psecnetwork->Configuration.ATIMWindow);
++	psecnetwork->Configuration.BeaconPeriod = cpu_to_le32(psecnetwork->Configuration.BeaconPeriod);
++	psecnetwork->Configuration.DSConfig = cpu_to_le32(psecnetwork->Configuration.DSConfig);
++	psecnetwork->Configuration.FHConfig.DwellTime=cpu_to_le32(psecnetwork->Configuration.FHConfig.DwellTime);
++	psecnetwork->Configuration.FHConfig.HopPattern=cpu_to_le32(psecnetwork->Configuration.FHConfig.HopPattern);
++	psecnetwork->Configuration.FHConfig.HopSet=cpu_to_le32(psecnetwork->Configuration.FHConfig.HopSet);
++	psecnetwork->Configuration.FHConfig.Length=cpu_to_le32(psecnetwork->Configuration.FHConfig.Length);	
++	psecnetwork->Configuration.Length = cpu_to_le32(psecnetwork->Configuration.Length);
++	psecnetwork->InfrastructureMode = cpu_to_le32(psecnetwork->InfrastructureMode);
++	psecnetwork->IELength = cpu_to_le32(psecnetwork->IELength);      
++#endif
++
++	_rtw_init_listhead(&pcmd->list);
++	pcmd->cmdcode = _JoinBss_CMD_;//GEN_CMD_CODE(_JoinBss)
++	pcmd->parmbuf = (unsigned char *)psecnetwork;
++	pcmd->rsp = NULL;
++	pcmd->rspsz = 0;
++
++	res = rtw_enqueue_cmd(pcmdpriv, pcmd);
++
++exit:
++	
++_func_exit_;
++
++	return res;
++}
++
++u8 rtw_disassoc_cmd(_adapter*padapter, u32 deauth_timeout_ms, bool enqueue) /* for sta_mode */
++{
++	struct cmd_obj *cmdobj = NULL;
++	struct disconnect_parm *param = NULL;
++	struct cmd_priv *cmdpriv = &padapter->cmdpriv;
++	u8 res = _SUCCESS;
++
++_func_enter_;
++
++	RT_TRACE(_module_rtl871x_cmd_c_, _drv_notice_, ("+rtw_disassoc_cmd\n"));
++
++	/* prepare cmd parameter */
++	param = (struct disconnect_parm *)rtw_zmalloc(sizeof(*param));
++	if (param == NULL) {
++		res = _FAIL;
++		goto exit;
++	}
++	param->deauth_timeout_ms = deauth_timeout_ms;
++
++	if (enqueue) {
++		/* need enqueue, prepare cmd_obj and enqueue */
++		cmdobj = (struct cmd_obj *)rtw_zmalloc(sizeof(*cmdobj));
++		if (cmdobj == NULL) {
++			res = _FAIL;
++			rtw_mfree((u8 *)param, sizeof(*param));
++			goto exit;
++		}
++		init_h2fwcmd_w_parm_no_rsp(cmdobj, param, _DisConnect_CMD_);
++		res = rtw_enqueue_cmd(cmdpriv, cmdobj);
++	} else {
++		/* no need to enqueue, do the cmd hdl directly and free cmd parameter */
++		if (H2C_SUCCESS != disconnect_hdl(padapter, (u8 *)param))
++			res = _FAIL;
++		rtw_mfree((u8 *)param, sizeof(*param));
++	}
++
++exit:
++
++_func_exit_;	
++
++	return res;
++}
++
++u8 rtw_setopmode_cmd(_adapter  *padapter, NDIS_802_11_NETWORK_INFRASTRUCTURE networktype)
++{
++	struct	cmd_obj*	ph2c;
++	struct	setopmode_parm* psetop;
++
++	struct	cmd_priv   *pcmdpriv= &padapter->cmdpriv;
++	u8	res=_SUCCESS;
++
++_func_enter_;
++
++	ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));			
++	if(ph2c==NULL){
++		res= _FALSE;
++		goto exit;
++	}
++	psetop = (struct setopmode_parm*)rtw_zmalloc(sizeof(struct setopmode_parm)); 
++
++	if(psetop==NULL){
++		rtw_mfree((u8 *) ph2c, sizeof(struct	cmd_obj));
++		res=_FALSE;
++		goto exit;
++	}
++
++	init_h2fwcmd_w_parm_no_rsp(ph2c, psetop, _SetOpMode_CMD_);
++	psetop->mode = (u8)networktype;
++
++	res = rtw_enqueue_cmd(pcmdpriv, ph2c);
++
++exit:
++
++_func_exit_;	
++
++	return res;
++}
++
++u8 rtw_setstakey_cmd(_adapter *padapter, u8 *psta, u8 unicast_key)
++{
++	struct cmd_obj*			ph2c;
++	struct set_stakey_parm	*psetstakey_para;
++	struct cmd_priv 			*pcmdpriv=&padapter->cmdpriv;
++	struct set_stakey_rsp		*psetstakey_rsp = NULL;
++	
++	struct mlme_priv			*pmlmepriv = &padapter->mlmepriv;
++	struct security_priv 		*psecuritypriv = &padapter->securitypriv;
++	struct sta_info* 			sta = (struct sta_info* )psta;
++	u8	res=_SUCCESS;
++
++_func_enter_;
++
++	ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));
++	if ( ph2c == NULL){
++		res= _FAIL;
++		goto exit;
++	}
++
++	psetstakey_para = (struct set_stakey_parm*)rtw_zmalloc(sizeof(struct set_stakey_parm));
++	if(psetstakey_para==NULL){
++		rtw_mfree((u8 *) ph2c, sizeof(struct	cmd_obj));
++		res=_FAIL;
++		goto exit;
++	}
++
++	psetstakey_rsp = (struct set_stakey_rsp*)rtw_zmalloc(sizeof(struct set_stakey_rsp)); 
++	if(psetstakey_rsp == NULL){
++		rtw_mfree((u8 *) ph2c, sizeof(struct	cmd_obj));
++		rtw_mfree((u8 *) psetstakey_para, sizeof(struct set_stakey_parm));
++		res=_FAIL;
++		goto exit;
++	}
++
++	init_h2fwcmd_w_parm_no_rsp(ph2c, psetstakey_para, _SetStaKey_CMD_);
++	ph2c->rsp = (u8 *) psetstakey_rsp;
++	ph2c->rspsz = sizeof(struct set_stakey_rsp);
++
++	_rtw_memcpy(psetstakey_para->addr, sta->hwaddr,ETH_ALEN);
++	
++	if(check_fwstate(pmlmepriv, WIFI_STATION_STATE)){
++#ifdef CONFIG_TDLS		
++		if(sta->tdls_sta_state&TDLS_LINKED_STATE)
++			psetstakey_para->algorithm=(u8)sta->dot118021XPrivacy;
++		else
++#endif //CONFIG_TDLS
++		psetstakey_para->algorithm =(unsigned char) psecuritypriv->dot11PrivacyAlgrthm;
++	}else{
++		GET_ENCRY_ALGO(psecuritypriv, sta, psetstakey_para->algorithm, _FALSE);
++	}
++
++	if (unicast_key == _TRUE) {
++#ifdef CONFIG_TDLS
++		if(sta->tdls_sta_state&TDLS_LINKED_STATE)
++			_rtw_memcpy(&psetstakey_para->key, sta->tpk.tk, 16);
++		else
++#endif //CONFIG_TDLS
++			_rtw_memcpy(&psetstakey_para->key, &sta->dot118021x_UncstKey, 16);
++        } else {
++		_rtw_memcpy(&psetstakey_para->key, &psecuritypriv->dot118021XGrpKey[psecuritypriv->dot118021XGrpKeyid].skey, 16);
++        }
++
++	//jeff: set this becasue at least sw key is ready
++	padapter->securitypriv.busetkipkey=_TRUE;
++
++	res = rtw_enqueue_cmd(pcmdpriv, ph2c);	
++
++exit:
++
++_func_exit_;	
++
++	return res;
++}
++
++u8 rtw_clearstakey_cmd(_adapter *padapter, u8 *psta, u8 entry, u8 enqueue)
++{
++	struct cmd_obj*			ph2c;
++	struct set_stakey_parm	*psetstakey_para;
++	struct cmd_priv 			*pcmdpriv=&padapter->cmdpriv;
++	struct set_stakey_rsp		*psetstakey_rsp = NULL;	
++	struct mlme_priv			*pmlmepriv = &padapter->mlmepriv;
++	struct security_priv 		*psecuritypriv = &padapter->securitypriv;
++	struct sta_info* 			sta = (struct sta_info* )psta;
++	u8	res=_SUCCESS;
++
++_func_enter_;
++
++	if(!enqueue)
++	{
++		clear_cam_entry(padapter, entry);
++	}
++	else
++	{
++		ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));
++		if ( ph2c == NULL){
++			res= _FAIL;
++			goto exit;
++		}
++
++		psetstakey_para = (struct set_stakey_parm*)rtw_zmalloc(sizeof(struct set_stakey_parm));
++		if(psetstakey_para==NULL){
++			rtw_mfree((u8 *) ph2c, sizeof(struct	cmd_obj));
++			res=_FAIL;
++			goto exit;
++		}
++
++		psetstakey_rsp = (struct set_stakey_rsp*)rtw_zmalloc(sizeof(struct set_stakey_rsp)); 
++		if(psetstakey_rsp == NULL){
++			rtw_mfree((u8 *) ph2c, sizeof(struct	cmd_obj));
++			rtw_mfree((u8 *) psetstakey_para, sizeof(struct set_stakey_parm));
++			res=_FAIL;
++			goto exit;
++		}
++
++		init_h2fwcmd_w_parm_no_rsp(ph2c, psetstakey_para, _SetStaKey_CMD_);
++		ph2c->rsp = (u8 *) psetstakey_rsp;
++		ph2c->rspsz = sizeof(struct set_stakey_rsp);
++
++		_rtw_memcpy(psetstakey_para->addr, sta->hwaddr, ETH_ALEN);
++
++		psetstakey_para->algorithm = _NO_PRIVACY_;
++
++		psetstakey_para->id = entry;
++	
++		res = rtw_enqueue_cmd(pcmdpriv, ph2c);	
++		
++	}
++	
++exit:
++
++_func_exit_;	
++
++	return res;
++}
++
++u8 rtw_setrttbl_cmd(_adapter  *padapter, struct setratable_parm *prate_table)
++{
++	struct cmd_obj*			ph2c;
++	struct setratable_parm *	psetrttblparm;	
++	struct cmd_priv 			*pcmdpriv=&padapter->cmdpriv;
++	u8	res=_SUCCESS;
++_func_enter_;	
++
++	ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));
++	if(ph2c==NULL){
++		res= _FAIL;
++		goto exit;
++		}
++	psetrttblparm = (struct setratable_parm*)rtw_zmalloc(sizeof(struct setratable_parm)); 
++
++	if(psetrttblparm==NULL){
++		rtw_mfree((unsigned char *) ph2c, sizeof(struct	cmd_obj));
++		res= _FAIL;
++		goto exit;
++	}
++
++	init_h2fwcmd_w_parm_no_rsp(ph2c, psetrttblparm, GEN_CMD_CODE(_SetRaTable));
++
++	_rtw_memcpy(psetrttblparm,prate_table,sizeof(struct setratable_parm));
++
++	res = rtw_enqueue_cmd(pcmdpriv, ph2c);	
++exit:
++_func_exit_;	
++	return res;
++
++}
++
++u8 rtw_getrttbl_cmd(_adapter  *padapter, struct getratable_rsp *pval)
++{
++	struct cmd_obj*			ph2c;
++	struct getratable_parm *	pgetrttblparm;	
++	struct cmd_priv 			*pcmdpriv=&padapter->cmdpriv;
++	u8	res=_SUCCESS;
++_func_enter_;	
++
++	ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));
++	if(ph2c==NULL){
++		res= _FAIL;
++		goto exit;
++	}
++	pgetrttblparm = (struct getratable_parm*)rtw_zmalloc(sizeof(struct getratable_parm)); 
++
++	if(pgetrttblparm==NULL){
++		rtw_mfree((unsigned char *) ph2c, sizeof(struct	cmd_obj));
++		res= _FAIL;
++		goto exit;
++	}
++
++//	init_h2fwcmd_w_parm_no_rsp(ph2c, psetrttblparm, GEN_CMD_CODE(_SetRaTable));
++
++	_rtw_init_listhead(&ph2c->list);
++	ph2c->cmdcode =GEN_CMD_CODE(_GetRaTable);
++	ph2c->parmbuf = (unsigned char *)pgetrttblparm;
++	ph2c->cmdsz =  sizeof(struct getratable_parm);
++	ph2c->rsp = (u8*)pval;
++	ph2c->rspsz = sizeof(struct getratable_rsp);
++	
++	pgetrttblparm ->rsvd = 0x0;
++	
++	res = rtw_enqueue_cmd(pcmdpriv, ph2c);	
++exit:
++_func_exit_;	
++	return res;
++
++}
++
++u8 rtw_setassocsta_cmd(_adapter  *padapter, u8 *mac_addr)
++{
++	struct cmd_priv 		*pcmdpriv = &padapter->cmdpriv;
++	struct cmd_obj*			ph2c;
++	struct set_assocsta_parm	*psetassocsta_para;	
++	struct set_stakey_rsp		*psetassocsta_rsp = NULL;
++
++	u8	res=_SUCCESS;
++
++_func_enter_;	
++
++	ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));
++	if(ph2c==NULL){
++		res= _FAIL;
++		goto exit;
++	}
++
++	psetassocsta_para = (struct set_assocsta_parm*)rtw_zmalloc(sizeof(struct set_assocsta_parm));
++	if(psetassocsta_para==NULL){
++		rtw_mfree((u8 *) ph2c, sizeof(struct	cmd_obj));
++		res=_FAIL;
++		goto exit;
++	}
++
++	psetassocsta_rsp = (struct set_stakey_rsp*)rtw_zmalloc(sizeof(struct set_assocsta_rsp)); 
++	if(psetassocsta_rsp==NULL){
++		rtw_mfree((u8 *) ph2c, sizeof(struct	cmd_obj));
++		rtw_mfree((u8 *) psetassocsta_para, sizeof(struct set_assocsta_parm));
++		return _FAIL;
++	}
++
++	init_h2fwcmd_w_parm_no_rsp(ph2c, psetassocsta_para, _SetAssocSta_CMD_);
++	ph2c->rsp = (u8 *) psetassocsta_rsp;
++	ph2c->rspsz = sizeof(struct set_assocsta_rsp);
++
++	_rtw_memcpy(psetassocsta_para->addr, mac_addr,ETH_ALEN);
++	
++	res = rtw_enqueue_cmd(pcmdpriv, ph2c);	
++
++exit:
++
++_func_exit_;	
++
++	return res;
++ }
++
++u8 rtw_addbareq_cmd(_adapter*padapter, u8 tid, u8 *addr)
++{
++	struct cmd_priv		*pcmdpriv = &padapter->cmdpriv;
++	struct cmd_obj*		ph2c;
++	struct addBaReq_parm	*paddbareq_parm;
++
++	u8	res=_SUCCESS;
++	
++_func_enter_;	
++
++	ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));	
++	if(ph2c==NULL){
++		res= _FAIL;
++		goto exit;
++	}
++	
++	paddbareq_parm = (struct addBaReq_parm*)rtw_zmalloc(sizeof(struct addBaReq_parm)); 
++	if(paddbareq_parm==NULL){
++		rtw_mfree((unsigned char *)ph2c, sizeof(struct	cmd_obj));
++		res= _FAIL;
++		goto exit;
++	}
++
++	paddbareq_parm->tid = tid;
++	_rtw_memcpy(paddbareq_parm->addr, addr, ETH_ALEN);
++
++	init_h2fwcmd_w_parm_no_rsp(ph2c, paddbareq_parm, GEN_CMD_CODE(_AddBAReq));
++
++	//DBG_871X("rtw_addbareq_cmd, tid=%d\n", tid);
++
++	//rtw_enqueue_cmd(pcmdpriv, ph2c);	
++	res = rtw_enqueue_cmd(pcmdpriv, ph2c);
++	
++exit:
++	
++_func_exit_;
++
++	return res;
++}
++//add for CONFIG_IEEE80211W, none 11w can use it
++u8 rtw_reset_securitypriv_cmd(_adapter*padapter)
++{
++	struct cmd_obj*		ph2c;
++	struct drvextra_cmd_parm  *pdrvextra_cmd_parm;	
++	struct cmd_priv	*pcmdpriv=&padapter->cmdpriv;
++	u8	res=_SUCCESS;
++	
++_func_enter_;	
++
++	ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));	
++	if(ph2c==NULL){
++		res= _FAIL;
++		goto exit;
++	}
++	
++	pdrvextra_cmd_parm = (struct drvextra_cmd_parm*)rtw_zmalloc(sizeof(struct drvextra_cmd_parm)); 
++	if(pdrvextra_cmd_parm==NULL){
++		rtw_mfree((unsigned char *)ph2c, sizeof(struct cmd_obj));
++		res= _FAIL;
++		goto exit;
++	}
++
++	pdrvextra_cmd_parm->ec_id = RESET_SECURITYPRIV;
++	pdrvextra_cmd_parm->type_size = 0;
++	pdrvextra_cmd_parm->pbuf = (u8 *)padapter;
++
++	init_h2fwcmd_w_parm_no_rsp(ph2c, pdrvextra_cmd_parm, GEN_CMD_CODE(_Set_Drv_Extra));
++
++	
++	//rtw_enqueue_cmd(pcmdpriv, ph2c);	
++	res = rtw_enqueue_cmd(pcmdpriv, ph2c);
++	
++exit:
++	
++_func_exit_;
++
++	return res;
++
++}
++
++u8 rtw_free_assoc_resources_cmd(_adapter*padapter)
++{
++	struct cmd_obj*		ph2c;
++	struct drvextra_cmd_parm  *pdrvextra_cmd_parm;	
++	struct cmd_priv	*pcmdpriv=&padapter->cmdpriv;
++	u8	res=_SUCCESS;
++	
++_func_enter_;	
++
++	ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));	
++	if(ph2c==NULL){
++		res= _FAIL;
++		goto exit;
++	}
++	
++	pdrvextra_cmd_parm = (struct drvextra_cmd_parm*)rtw_zmalloc(sizeof(struct drvextra_cmd_parm)); 
++	if(pdrvextra_cmd_parm==NULL){
++		rtw_mfree((unsigned char *)ph2c, sizeof(struct cmd_obj));
++		res= _FAIL;
++		goto exit;
++	}
++
++	pdrvextra_cmd_parm->ec_id = FREE_ASSOC_RESOURCES;
++	pdrvextra_cmd_parm->type_size = 0;
++	pdrvextra_cmd_parm->pbuf = (u8 *)padapter;
++
++	init_h2fwcmd_w_parm_no_rsp(ph2c, pdrvextra_cmd_parm, GEN_CMD_CODE(_Set_Drv_Extra));
++
++	
++	//rtw_enqueue_cmd(pcmdpriv, ph2c);	
++	res = rtw_enqueue_cmd(pcmdpriv, ph2c);
++	
++exit:
++	
++_func_exit_;
++
++	return res;
++
++}
++
++
++u8 rtw_dynamic_chk_wk_cmd(_adapter*padapter)
++{
++	struct cmd_obj*		ph2c;
++	struct drvextra_cmd_parm  *pdrvextra_cmd_parm;	
++	struct cmd_priv	*pcmdpriv=&padapter->cmdpriv;
++	u8	res=_SUCCESS;
++	
++_func_enter_;	
++
++	if ((padapter->bDriverStopped == _TRUE)||(padapter->bSurpriseRemoved== _TRUE))
++		goto exit;
++
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if (padapter->adapter_type != PRIMARY_ADAPTER && padapter->pbuddy_adapter)
++		pcmdpriv = &(padapter->pbuddy_adapter->cmdpriv);
++#endif
++
++	ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));	
++	if(ph2c==NULL){
++		res= _FAIL;
++		goto exit;
++	}
++	
++	pdrvextra_cmd_parm = (struct drvextra_cmd_parm*)rtw_zmalloc(sizeof(struct drvextra_cmd_parm)); 
++	if(pdrvextra_cmd_parm==NULL){
++		rtw_mfree((unsigned char *)ph2c, sizeof(struct cmd_obj));
++		res= _FAIL;
++		goto exit;
++	}
++
++	pdrvextra_cmd_parm->ec_id = DYNAMIC_CHK_WK_CID;
++	pdrvextra_cmd_parm->type_size = 0;
++	pdrvextra_cmd_parm->pbuf = (u8 *)padapter;
++
++	init_h2fwcmd_w_parm_no_rsp(ph2c, pdrvextra_cmd_parm, GEN_CMD_CODE(_Set_Drv_Extra));
++
++	
++	//rtw_enqueue_cmd(pcmdpriv, ph2c);	
++	res = rtw_enqueue_cmd(pcmdpriv, ph2c);
++	
++exit:
++	
++_func_exit_;
++
++	return res;
++
++}
++
++u8 rtw_set_ch_cmd(_adapter*padapter, u8 ch, u8 bw, u8 ch_offset, u8 enqueue)
++{
++	struct cmd_obj *pcmdobj;
++	struct set_ch_parm *set_ch_parm;
++	struct cmd_priv *pcmdpriv = &padapter->cmdpriv;
++
++	u8 res=_SUCCESS;
++
++_func_enter_;
++
++	DBG_871X(FUNC_NDEV_FMT" ch:%u, bw:%u, ch_offset:%u\n",
++		FUNC_NDEV_ARG(padapter->pnetdev), ch, bw, ch_offset);
++
++	/* check input parameter */
++
++	/* prepare cmd parameter */
++	set_ch_parm = (struct set_ch_parm *)rtw_zmalloc(sizeof(*set_ch_parm));
++	if (set_ch_parm == NULL) {
++		res= _FAIL;
++		goto exit;
++	}
++	set_ch_parm->ch = ch;
++	set_ch_parm->bw = bw;
++	set_ch_parm->ch_offset = ch_offset;
++
++	if (enqueue) {
++		/* need enqueue, prepare cmd_obj and enqueue */
++		pcmdobj = (struct cmd_obj*)rtw_zmalloc(sizeof(struct	cmd_obj));
++		if(pcmdobj == NULL){
++			rtw_mfree((u8 *)set_ch_parm, sizeof(*set_ch_parm));
++			res=_FAIL;
++			goto exit;
++		}
++
++		init_h2fwcmd_w_parm_no_rsp(pcmdobj, set_ch_parm, GEN_CMD_CODE(_SetChannel));
++		res = rtw_enqueue_cmd(pcmdpriv, pcmdobj);
++	} else {
++		/* no need to enqueue, do the cmd hdl directly and free cmd parameter */
++		if( H2C_SUCCESS !=set_ch_hdl(padapter, (u8 *)set_ch_parm) )
++			res = _FAIL;
++		
++		rtw_mfree((u8 *)set_ch_parm, sizeof(*set_ch_parm));
++	}
++
++	/* do something based on res... */
++
++exit:
++
++	DBG_871X(FUNC_NDEV_FMT" res:%u\n", FUNC_NDEV_ARG(padapter->pnetdev), res);
++
++_func_exit_;	
++
++	return res;
++}
++
++u8 rtw_set_chplan_cmd(_adapter*padapter, u8 chplan, u8 enqueue)
++{
++	struct	cmd_obj*	pcmdobj;
++	struct	SetChannelPlan_param *setChannelPlan_param;
++	struct	cmd_priv   *pcmdpriv = &padapter->cmdpriv;
++
++	u8	res=_SUCCESS;
++
++_func_enter_;
++
++	RT_TRACE(_module_rtl871x_cmd_c_, _drv_notice_, ("+rtw_set_chplan_cmd\n"));
++
++	//check input parameter
++	if(!rtw_is_channel_plan_valid(chplan)) {
++		res = _FAIL;
++		goto exit;
++	}
++
++	//prepare cmd parameter
++	setChannelPlan_param = (struct	SetChannelPlan_param *)rtw_zmalloc(sizeof(struct SetChannelPlan_param));
++	if(setChannelPlan_param == NULL) {
++		res= _FAIL;
++		goto exit;
++	}
++	setChannelPlan_param->channel_plan=chplan;
++
++	if(enqueue)
++	{
++		//need enqueue, prepare cmd_obj and enqueue
++		pcmdobj = (struct	cmd_obj*)rtw_zmalloc(sizeof(struct	cmd_obj));
++		if(pcmdobj == NULL){
++			rtw_mfree((u8 *)setChannelPlan_param, sizeof(struct SetChannelPlan_param));
++			res=_FAIL;
++			goto exit;
++		}
++
++		init_h2fwcmd_w_parm_no_rsp(pcmdobj, setChannelPlan_param, GEN_CMD_CODE(_SetChannelPlan));
++		res = rtw_enqueue_cmd(pcmdpriv, pcmdobj);
++	}
++	else
++	{
++		//no need to enqueue, do the cmd hdl directly and free cmd parameter
++		if( H2C_SUCCESS !=set_chplan_hdl(padapter, (unsigned char *)setChannelPlan_param) )
++			res = _FAIL;
++		
++		rtw_mfree((u8 *)setChannelPlan_param, sizeof(struct SetChannelPlan_param));
++	}
++
++	//do something based on res...
++	if(res == _SUCCESS)
++		padapter->mlmepriv.ChannelPlan = chplan;
++	
++exit:
++
++_func_exit_;	
++
++	return res;
++}
++
++u8 rtw_led_blink_cmd(_adapter*padapter, PLED_871x pLed)
++{
++	struct	cmd_obj*	pcmdobj;
++	struct	LedBlink_param *ledBlink_param;
++	struct	cmd_priv   *pcmdpriv = &padapter->cmdpriv;
++
++	u8	res=_SUCCESS;
++
++_func_enter_;
++
++	RT_TRACE(_module_rtl871x_cmd_c_, _drv_notice_, ("+rtw_led_blink_cmd\n"));
++	
++	pcmdobj = (struct	cmd_obj*)rtw_zmalloc(sizeof(struct	cmd_obj));
++	if(pcmdobj == NULL){
++		res=_FAIL;
++		goto exit;
++	}
++
++	ledBlink_param = (struct	LedBlink_param *)rtw_zmalloc(sizeof(struct	LedBlink_param));
++	if(ledBlink_param == NULL) {
++		rtw_mfree((u8 *)pcmdobj, sizeof(struct cmd_obj));
++		res= _FAIL;
++		goto exit;
++	}
++
++	ledBlink_param->pLed=pLed;
++	
++	init_h2fwcmd_w_parm_no_rsp(pcmdobj, ledBlink_param, GEN_CMD_CODE(_LedBlink));
++	res = rtw_enqueue_cmd(pcmdpriv, pcmdobj);
++	
++exit:
++
++_func_exit_;	
++
++	return res;
++}
++
++u8 rtw_set_csa_cmd(_adapter*padapter, u8 new_ch_no)
++{
++	struct	cmd_obj*	pcmdobj;
++	struct	SetChannelSwitch_param*setChannelSwitch_param;
++	struct 	mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	struct	cmd_priv   *pcmdpriv = &padapter->cmdpriv;
++
++	u8	res=_SUCCESS;
++
++_func_enter_;
++
++	RT_TRACE(_module_rtl871x_cmd_c_, _drv_notice_, ("+rtw_set_csa_cmd\n"));
++	
++	pcmdobj = (struct	cmd_obj*)rtw_zmalloc(sizeof(struct	cmd_obj));
++	if(pcmdobj == NULL){
++		res=_FAIL;
++		goto exit;
++	}
++
++	setChannelSwitch_param = (struct SetChannelSwitch_param *)rtw_zmalloc(sizeof(struct	SetChannelSwitch_param));
++	if(setChannelSwitch_param == NULL) {
++		rtw_mfree((u8 *)pcmdobj, sizeof(struct cmd_obj));
++		res= _FAIL;
++		goto exit;
++	}
++
++	setChannelSwitch_param->new_ch_no=new_ch_no;
++	
++	init_h2fwcmd_w_parm_no_rsp(pcmdobj, setChannelSwitch_param, GEN_CMD_CODE(_SetChannelSwitch));
++	res = rtw_enqueue_cmd(pcmdpriv, pcmdobj);
++	
++exit:
++
++_func_exit_;	
++
++	return res;
++}
++
++u8 rtw_tdls_cmd(_adapter *padapter, u8 *addr, u8 option)
++{
++	struct	cmd_obj*	pcmdobj;
++	struct	TDLSoption_param	*TDLSoption;
++	struct 	mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	struct	cmd_priv   *pcmdpriv = &padapter->cmdpriv;
++
++	u8	res=_SUCCESS;
++
++_func_enter_;
++
++#ifdef CONFIG_TDLS
++
++	RT_TRACE(_module_rtl871x_cmd_c_, _drv_notice_, ("+rtw_set_tdls_cmd\n"));
++
++	pcmdobj = (struct	cmd_obj*)rtw_zmalloc(sizeof(struct	cmd_obj));
++	if(pcmdobj == NULL){
++		res=_FAIL;
++		goto exit;
++	}
++
++	TDLSoption= (struct TDLSoption_param *)rtw_zmalloc(sizeof(struct TDLSoption_param));
++	if(TDLSoption == NULL) {
++		rtw_mfree((u8 *)pcmdobj, sizeof(struct cmd_obj));
++		res= _FAIL;
++		goto exit;
++	}
++
++	_rtw_spinlock(&(padapter->tdlsinfo.cmd_lock));
++	_rtw_memcpy(TDLSoption->addr, addr, 6);	
++	TDLSoption->option = option;
++	_rtw_spinunlock(&(padapter->tdlsinfo.cmd_lock));
++	init_h2fwcmd_w_parm_no_rsp(pcmdobj, TDLSoption, GEN_CMD_CODE(_TDLS));
++	res = rtw_enqueue_cmd(pcmdpriv, pcmdobj);
++
++#endif	//CONFIG_TDLS
++	
++exit:
++
++
++_func_exit_;	
++
++	return res;
++}
++
++static void traffic_status_watchdog(_adapter *padapter)
++{
++#ifdef CONFIG_LPS
++	u8	bEnterPS;
++#endif
++	u16	BusyThreshold = 100;
++	u8	bBusyTraffic = _FALSE, bTxBusyTraffic = _FALSE, bRxBusyTraffic = _FALSE;
++	u8	bHigherBusyTraffic = _FALSE, bHigherBusyRxTraffic = _FALSE, bHigherBusyTxTraffic = _FALSE;
++	struct mlme_priv		*pmlmepriv = &(padapter->mlmepriv);
++#ifdef CONFIG_TDLS
++	struct tdls_info *ptdlsinfo = &(padapter->tdlsinfo);
++#endif //CONFIG_TDLS
++
++	RT_LINK_DETECT_T * link_detect = &pmlmepriv->LinkDetectInfo;
++
++	//
++	// Determine if our traffic is busy now
++	//
++	if((check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) 
++		/*&& !MgntInitAdapterInProgress(pMgntInfo)*/)
++	{
++
++		// if we raise bBusyTraffic in last watchdog, using lower threshold.
++		if (pmlmepriv->LinkDetectInfo.bBusyTraffic)
++			BusyThreshold = 75;
++		if( pmlmepriv->LinkDetectInfo.NumRxOkInPeriod > BusyThreshold ||
++			pmlmepriv->LinkDetectInfo.NumTxOkInPeriod > BusyThreshold )
++		{
++			bBusyTraffic = _TRUE;
++
++			if(pmlmepriv->LinkDetectInfo.NumRxOkInPeriod > BusyThreshold)
++				bRxBusyTraffic = _TRUE;
++
++			if(pmlmepriv->LinkDetectInfo.NumTxOkInPeriod > BusyThreshold)
++				bTxBusyTraffic = _TRUE;
++		}
++
++		// Higher Tx/Rx data.
++		if( pmlmepriv->LinkDetectInfo.NumRxOkInPeriod > 4000 ||
++			pmlmepriv->LinkDetectInfo.NumTxOkInPeriod > 4000 )
++		{
++			bHigherBusyTraffic = _TRUE;
++
++			// Extremely high Rx data.
++			if(pmlmepriv->LinkDetectInfo.NumRxOkInPeriod > 5000)
++				bHigherBusyRxTraffic = _TRUE;
++
++			// Extremely high Tx data.
++			if(pmlmepriv->LinkDetectInfo.NumTxOkInPeriod > 5000)
++				bHigherBusyTxTraffic = _TRUE;
++		}
++
++#ifdef CONFIG_TRAFFIC_PROTECT
++#define TX_ACTIVE_TH 2
++#define RX_ACTIVE_TH 1
++#define TRAFFIC_PROTECT_PERIOD_MS 4500
++
++	if (link_detect->NumTxOkInPeriod > TX_ACTIVE_TH
++		|| link_detect->NumRxUnicastOkInPeriod > RX_ACTIVE_TH) {
++
++		LOG_LEVEL(_drv_info_, FUNC_ADPT_FMT" acqiure wake_lock for %u ms(tx:%d,rx_unicast:%d)\n",
++			FUNC_ADPT_ARG(padapter),
++			TRAFFIC_PROTECT_PERIOD_MS,
++			link_detect->NumTxOkInPeriod,
++			link_detect->NumRxUnicastOkInPeriod);
++
++		rtw_lock_suspend_timeout(TRAFFIC_PROTECT_PERIOD_MS);
++	}
++#endif
++
++#ifdef CONFIG_TDLS
++#ifdef CONFIG_TDLS_AUTOSETUP
++		if( ( ptdlsinfo->watchdog_count % TDLS_WATCHDOG_PERIOD ) == 0 )	//TDLS_WATCHDOG_PERIOD * 2sec, periodically sending
++			issue_tdls_dis_req( padapter, NULL );
++		ptdlsinfo->watchdog_count++;
++#endif //CONFIG_TDLS_AUTOSETUP
++#endif //CONFIG_TDLS
++
++#ifdef CONFIG_LPS
++		// check traffic for  powersaving.
++		if( ((pmlmepriv->LinkDetectInfo.NumRxUnicastOkInPeriod + pmlmepriv->LinkDetectInfo.NumTxOkInPeriod) > 8 ) ||
++			(pmlmepriv->LinkDetectInfo.NumRxUnicastOkInPeriod > 2) )
++		{
++			//DBG_871X("Tx = %d, Rx = %d \n",pmlmepriv->LinkDetectInfo.NumTxOkInPeriod,pmlmepriv->LinkDetectInfo.NumRxUnicastOkInPeriod);
++			bEnterPS= _FALSE;
++		}
++		else
++		{
++			bEnterPS= _TRUE;
++		}
++
++		// LeisurePS only work in infra mode.
++		if(bEnterPS)
++		{
++			LPS_Enter(padapter);
++		}
++		else
++		{
++			LPS_Leave(padapter);
++		}
++#endif
++	}
++	else
++	{
++#ifdef CONFIG_LPS
++		LPS_Leave(padapter);
++#endif
++	}
++
++	pmlmepriv->LinkDetectInfo.NumRxOkInPeriod = 0;
++	pmlmepriv->LinkDetectInfo.NumTxOkInPeriod = 0;
++	pmlmepriv->LinkDetectInfo.NumRxUnicastOkInPeriod = 0;
++	pmlmepriv->LinkDetectInfo.bBusyTraffic = bBusyTraffic;
++	pmlmepriv->LinkDetectInfo.bTxBusyTraffic = bTxBusyTraffic;
++	pmlmepriv->LinkDetectInfo.bRxBusyTraffic = bRxBusyTraffic;
++	pmlmepriv->LinkDetectInfo.bHigherBusyTraffic = bHigherBusyTraffic;
++	pmlmepriv->LinkDetectInfo.bHigherBusyRxTraffic = bHigherBusyRxTraffic;
++	pmlmepriv->LinkDetectInfo.bHigherBusyTxTraffic = bHigherBusyTxTraffic;
++	
++}
++
++void dynamic_chk_wk_hdl(_adapter *padapter, u8 *pbuf, int sz);
++void dynamic_chk_wk_hdl(_adapter *padapter, u8 *pbuf, int sz)
++{
++	struct mlme_priv *pmlmepriv;
++	
++	if ((padapter->bDriverStopped == _TRUE)||(padapter->bSurpriseRemoved== _TRUE))
++		return;
++
++	if((void*)padapter != (void*)pbuf && padapter->pbuddy_adapter == NULL)
++		return;		
++
++	padapter = (_adapter *)pbuf;
++
++	if ((padapter->bDriverStopped == _TRUE)||(padapter->bSurpriseRemoved== _TRUE))
++		return;
++
++	pmlmepriv = &(padapter->mlmepriv);
++
++#ifdef CONFIG_ACTIVE_KEEP_ALIVE_CHECK
++#ifdef CONFIG_AP_MODE
++	if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE)
++	{			
++		expire_timeout_chk(padapter);
++	}
++#endif
++#endif //CONFIG_ACTIVE_KEEP_ALIVE_CHECK
++
++	#ifdef DBG_CONFIG_ERROR_DETECT	
++	rtw_hal_sreset_xmit_status_check(padapter);
++	#endif	
++
++	//if(check_fwstate(pmlmepriv, _FW_UNDER_LINKING|_FW_UNDER_SURVEY)==_FALSE)
++	{
++		linked_status_chk(padapter);	
++		traffic_status_watchdog(padapter);
++	}
++
++	rtw_hal_dm_watchdog(padapter);
++
++	//check_hw_pbc(padapter, pdrvextra_cmd->pbuf, pdrvextra_cmd->type_size);	
++
++}
++
++#ifdef CONFIG_LPS
++
++void lps_ctrl_wk_hdl(_adapter *padapter, u8 lps_ctrl_type);
++void lps_ctrl_wk_hdl(_adapter *padapter, u8 lps_ctrl_type)
++{
++	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	u8	mstatus;
++	
++_func_enter_;
++
++	if((check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE)
++		|| (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == _TRUE))
++	{
++		return;
++	}
++
++	switch(lps_ctrl_type)
++	{
++		case LPS_CTRL_SCAN:
++			//DBG_871X("LPS_CTRL_SCAN \n");
++			LeaveAllPowerSaveMode(padapter);
++			break;
++		case LPS_CTRL_JOINBSS:
++			//DBG_871X("LPS_CTRL_JOINBSS \n");
++			LPS_Leave(padapter);
++			break;
++		case LPS_CTRL_CONNECT:
++			//DBG_871X("LPS_CTRL_CONNECT \n");
++			mstatus = 1;
++			// Reset LPS Setting
++			padapter->pwrctrlpriv.LpsIdleCount = 0;
++			rtw_hal_set_hwreg(padapter, HW_VAR_H2C_FW_JOINBSSRPT, (u8 *)(&mstatus));
++			break;
++		case LPS_CTRL_DISCONNECT:
++			//DBG_871X("LPS_CTRL_DISCONNECT \n");
++			mstatus = 0;
++			LPS_Leave(padapter);
++			rtw_hal_set_hwreg(padapter, HW_VAR_H2C_FW_JOINBSSRPT, (u8 *)(&mstatus));
++			break;
++		case LPS_CTRL_SPECIAL_PACKET:
++			//DBG_871X("LPS_CTRL_SPECIAL_PACKET \n");
++			pwrpriv->DelayLPSLastTimeStamp = rtw_get_current_time();
++			LPS_Leave(padapter);
++			break;
++
++		default:
++			break;
++	}
++
++_func_exit_;
++}
++
++u8 rtw_lps_ctrl_wk_cmd(_adapter*padapter, u8 lps_ctrl_type, u8 enqueue)
++{
++	struct cmd_obj	*ph2c;
++	struct drvextra_cmd_parm	*pdrvextra_cmd_parm;	
++	struct cmd_priv	*pcmdpriv = &padapter->cmdpriv;
++	//struct pwrctrl_priv *pwrctrlpriv = &padapter->pwrctrlpriv;
++	u8	res = _SUCCESS;
++	
++_func_enter_;
++
++	//if(!pwrctrlpriv->bLeisurePs)
++	//	return res;
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if (padapter->iface_type != IFACE_PORT0)
++		return res;
++#endif
++
++	if(enqueue)
++	{
++		ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));	
++		if(ph2c==NULL){
++			res= _FAIL;
++			goto exit;
++		}
++		
++		pdrvextra_cmd_parm = (struct drvextra_cmd_parm*)rtw_zmalloc(sizeof(struct drvextra_cmd_parm)); 
++		if(pdrvextra_cmd_parm==NULL){
++			rtw_mfree((unsigned char *)ph2c, sizeof(struct cmd_obj));
++			res= _FAIL;
++			goto exit;
++		}
++
++		pdrvextra_cmd_parm->ec_id = LPS_CTRL_WK_CID;
++		pdrvextra_cmd_parm->type_size = lps_ctrl_type;
++		pdrvextra_cmd_parm->pbuf = NULL;
++
++		init_h2fwcmd_w_parm_no_rsp(ph2c, pdrvextra_cmd_parm, GEN_CMD_CODE(_Set_Drv_Extra));
++
++		res = rtw_enqueue_cmd(pcmdpriv, ph2c);
++	}
++	else
++	{
++		lps_ctrl_wk_hdl(padapter, lps_ctrl_type);
++	}
++	
++exit:
++	
++_func_exit_;
++
++	return res;
++
++}
++
++#endif
++#ifdef CONFIG_ANTENNA_DIVERSITY
++
++void antenna_select_wk_hdl(_adapter *padapter, u8 antenna)
++{
++	rtw_hal_set_hwreg(padapter, HW_VAR_ANTENNA_DIVERSITY_SELECT, (u8 *)(&antenna));
++}
++
++u8 rtw_antenna_select_cmd(_adapter*padapter, u8 antenna,u8 enqueue)
++{
++	struct cmd_obj		*ph2c;
++	struct drvextra_cmd_parm	*pdrvextra_cmd_parm;	
++	struct cmd_priv	*pcmdpriv = &padapter->cmdpriv;
++	u8 	bSupportAntDiv = _FALSE;
++	u8	res = _SUCCESS;
++
++_func_enter_;
++	rtw_hal_get_def_var(padapter, HAL_DEF_IS_SUPPORT_ANT_DIV, &(bSupportAntDiv));
++	if(_FALSE == bSupportAntDiv )	return res;
++
++	if(_TRUE == enqueue)
++	{
++		ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));	
++		if(ph2c==NULL){
++			res= _FAIL;
++			goto exit;
++		}
++
++		pdrvextra_cmd_parm = (struct drvextra_cmd_parm*)rtw_zmalloc(sizeof(struct drvextra_cmd_parm));
++		if(pdrvextra_cmd_parm==NULL){
++			rtw_mfree((unsigned char *)ph2c, sizeof(struct cmd_obj));
++			res= _FAIL;
++			goto exit;
++		}
++
++		pdrvextra_cmd_parm->ec_id = ANT_SELECT_WK_CID;
++		pdrvextra_cmd_parm->type_size = antenna;
++		pdrvextra_cmd_parm->pbuf = NULL;
++		init_h2fwcmd_w_parm_no_rsp(ph2c, pdrvextra_cmd_parm, GEN_CMD_CODE(_Set_Drv_Extra));
++
++		res = rtw_enqueue_cmd(pcmdpriv, ph2c);
++	}
++	else{
++		antenna_select_wk_hdl(padapter,antenna );
++	}
++exit:
++
++_func_exit_;
++
++	return res;
++
++}
++#endif
++
++void power_saving_wk_hdl(_adapter *padapter, u8 *pbuf, int sz);
++void power_saving_wk_hdl(_adapter *padapter, u8 *pbuf, int sz)
++{
++	 rtw_ps_processor(padapter);
++}
++
++//add for CONFIG_IEEE80211W, none 11w can use it
++void reset_securitypriv_hdl(_adapter *padapter)
++{
++	 rtw_reset_securitypriv(padapter);
++}
++
++void free_assoc_resources_hdl(_adapter *padapter)
++{
++	 rtw_free_assoc_resources(padapter, 1);
++}
++
++#ifdef CONFIG_P2P
++u8 p2p_protocol_wk_cmd(_adapter*padapter, int intCmdType )
++{
++	struct cmd_obj	*ph2c;
++	struct drvextra_cmd_parm	*pdrvextra_cmd_parm;
++	struct wifidirect_info	*pwdinfo= &(padapter->wdinfo);
++	struct cmd_priv	*pcmdpriv = &padapter->cmdpriv;
++	u8	res = _SUCCESS;
++	
++_func_enter_;
++
++	if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++	{
++		return res;
++	}
++
++	ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));	
++	if(ph2c==NULL){
++		res= _FAIL;
++		goto exit;
++	}
++			
++	pdrvextra_cmd_parm = (struct drvextra_cmd_parm*)rtw_zmalloc(sizeof(struct drvextra_cmd_parm)); 
++	if(pdrvextra_cmd_parm==NULL){
++		rtw_mfree((unsigned char *)ph2c, sizeof(struct cmd_obj));
++		res= _FAIL;
++		goto exit;
++	}
++
++	pdrvextra_cmd_parm->ec_id = P2P_PROTO_WK_CID;
++	pdrvextra_cmd_parm->type_size = intCmdType;	//	As the command tppe.
++	pdrvextra_cmd_parm->pbuf = NULL;		//	Must be NULL here
++
++	init_h2fwcmd_w_parm_no_rsp(ph2c, pdrvextra_cmd_parm, GEN_CMD_CODE(_Set_Drv_Extra));
++
++	res = rtw_enqueue_cmd(pcmdpriv, ph2c);
++	
++exit:
++	
++_func_exit_;
++
++	return res;
++
++}
++#endif //CONFIG_P2P
++
++u8 rtw_ps_cmd(_adapter*padapter)
++{
++	struct cmd_obj		*ppscmd;
++	struct drvextra_cmd_parm	*pdrvextra_cmd_parm;	
++	struct cmd_priv	*pcmdpriv = &padapter->cmdpriv;
++	
++	u8	res = _SUCCESS;
++_func_enter_;
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if (padapter->adapter_type != PRIMARY_ADAPTER)
++		goto exit;
++#endif
++	
++	ppscmd = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));	
++	if(ppscmd==NULL){
++		res= _FAIL;
++		goto exit;
++	}
++		
++	pdrvextra_cmd_parm = (struct drvextra_cmd_parm*)rtw_zmalloc(sizeof(struct drvextra_cmd_parm)); 
++	if(pdrvextra_cmd_parm==NULL){
++		rtw_mfree((unsigned char *)ppscmd, sizeof(struct cmd_obj));
++		res= _FAIL;
++		goto exit;
++	}
++
++	pdrvextra_cmd_parm->ec_id = POWER_SAVING_CTRL_WK_CID;	
++	pdrvextra_cmd_parm->pbuf = NULL;
++	init_h2fwcmd_w_parm_no_rsp(ppscmd, pdrvextra_cmd_parm, GEN_CMD_CODE(_Set_Drv_Extra));
++
++	res = rtw_enqueue_cmd(pcmdpriv, ppscmd);
++	
++exit:
++	
++_func_exit_;
++
++	return res;
++
++}
++
++#ifdef CONFIG_AP_MODE
++
++static void rtw_chk_hi_queue_hdl(_adapter *padapter)
++{
++	int cnt=0;
++	struct sta_info *psta_bmc;
++	struct sta_priv *pstapriv = &padapter->stapriv;
++
++	psta_bmc = rtw_get_bcmc_stainfo(padapter);
++	if(!psta_bmc)
++		return;
++
++
++	if(psta_bmc->sleepq_len==0)
++	{
++		while((rtw_read32(padapter, 0x414)&0x00ffff00)!=0)
++		{
++			rtw_msleep_os(100);
++
++			cnt++;
++			
++			if(cnt>10)
++				break;	
++		}
++
++		if(cnt<=10)
++		{
++			pstapriv->tim_bitmap &= ~BIT(0);
++			pstapriv->sta_dz_bitmap &= ~BIT(0);
++			
++			update_beacon(padapter, _TIM_IE_, NULL, _FALSE);
++		}	
++	}	
++	
++}
++
++u8 rtw_chk_hi_queue_cmd(_adapter*padapter)
++{
++	struct cmd_obj	*ph2c;
++	struct drvextra_cmd_parm	*pdrvextra_cmd_parm;	
++	struct cmd_priv	*pcmdpriv = &padapter->cmdpriv;
++	u8	res = _SUCCESS;
++	
++	ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));	
++	if(ph2c==NULL){
++		res= _FAIL;
++		goto exit;
++	}
++			
++	pdrvextra_cmd_parm = (struct drvextra_cmd_parm*)rtw_zmalloc(sizeof(struct drvextra_cmd_parm)); 
++	if(pdrvextra_cmd_parm==NULL){
++		rtw_mfree((unsigned char *)ph2c, sizeof(struct cmd_obj));
++		res= _FAIL;
++		goto exit;
++	}
++
++	pdrvextra_cmd_parm->ec_id = CHECK_HIQ_WK_CID;
++	pdrvextra_cmd_parm->type_size = 0;
++	pdrvextra_cmd_parm->pbuf = NULL;
++
++	init_h2fwcmd_w_parm_no_rsp(ph2c, pdrvextra_cmd_parm, GEN_CMD_CODE(_Set_Drv_Extra));
++
++	res = rtw_enqueue_cmd(pcmdpriv, ph2c);
++	
++exit:
++	
++	return res;
++
++}
++#endif
++
++u8 rtw_c2h_wk_cmd(PADAPTER padapter, u8 *c2h_evt)
++{
++	struct cmd_obj *ph2c;
++	struct drvextra_cmd_parm *pdrvextra_cmd_parm;
++	struct cmd_priv	*pcmdpriv = &padapter->cmdpriv;
++	u8	res = _SUCCESS;
++
++	ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));
++	if (ph2c == NULL) {
++		res = _FAIL;
++		goto exit;
++	}
++
++	pdrvextra_cmd_parm = (struct drvextra_cmd_parm*)rtw_zmalloc(sizeof(struct drvextra_cmd_parm));
++	if (pdrvextra_cmd_parm == NULL) {
++		rtw_mfree((u8*)ph2c, sizeof(struct cmd_obj));
++		res = _FAIL;
++		goto exit;
++	}
++
++	pdrvextra_cmd_parm->ec_id = C2H_WK_CID;
++	pdrvextra_cmd_parm->type_size = c2h_evt?16:0;
++	pdrvextra_cmd_parm->pbuf = c2h_evt;
++
++	init_h2fwcmd_w_parm_no_rsp(ph2c, pdrvextra_cmd_parm, GEN_CMD_CODE(_Set_Drv_Extra));
++
++	res = rtw_enqueue_cmd(pcmdpriv, ph2c);
++	
++exit:
++	
++	return res;
++}
++
++s32 c2h_evt_hdl(_adapter *adapter, struct c2h_evt_hdr *c2h_evt, c2h_id_filter filter)
++{
++	s32 ret = _FAIL;
++	u8 buf[16];
++
++	if (!c2h_evt) {
++		/* No c2h event in cmd_obj, read c2h event before handling*/
++		if (c2h_evt_read(adapter, buf) == _SUCCESS) {
++			c2h_evt = (struct c2h_evt_hdr *)buf;
++			
++			if (filter && filter(c2h_evt->id) == _FALSE)
++				goto exit;
++
++			ret = rtw_hal_c2h_handler(adapter, c2h_evt);
++		}
++	} else {
++
++		if (filter && filter(c2h_evt->id) == _FALSE)
++			goto exit;
++
++		ret = rtw_hal_c2h_handler(adapter, c2h_evt);
++	}
++exit:
++	return ret;
++}
++
++#ifdef CONFIG_C2H_WK
++static void c2h_wk_callback(_workitem *work)
++{
++	struct evt_priv *evtpriv = container_of(work, struct evt_priv, c2h_wk);
++	_adapter *adapter = container_of(evtpriv, _adapter, evtpriv);
++	struct c2h_evt_hdr *c2h_evt;
++	c2h_id_filter ccx_id_filter = rtw_hal_c2h_id_filter_ccx(adapter);
++
++	evtpriv->c2h_wk_alive = _TRUE;
++
++	while (!rtw_cbuf_empty(evtpriv->c2h_queue)) {
++		if ((c2h_evt = (struct c2h_evt_hdr *)rtw_cbuf_pop(evtpriv->c2h_queue)) != NULL) {
++			/* This C2H event is read, clear it */
++			c2h_evt_clear(adapter);
++		} else if ((c2h_evt = (struct c2h_evt_hdr *)rtw_malloc(16)) != NULL) {
++			/* This C2H event is not read, read & clear now */
++			if (c2h_evt_read(adapter, (u8*)c2h_evt) != _SUCCESS)
++				continue;
++		}
++
++		/* Special pointer to trigger c2h_evt_clear only */
++		if ((void *)c2h_evt == (void *)evtpriv)
++			continue;
++
++		if (!c2h_evt_exist(c2h_evt)) {
++			rtw_mfree((u8*)c2h_evt, 16);
++			continue;
++		}
++		
++		if (ccx_id_filter(c2h_evt->id) == _TRUE) {
++			/* Handle CCX report here */
++			rtw_hal_c2h_handler(adapter, c2h_evt);
++			rtw_mfree((u8*)c2h_evt, 16);
++		} else {
++			/* Enqueue into cmd_thread for others */
++			rtw_c2h_wk_cmd(adapter, (u8 *)c2h_evt);
++		}
++	}
++
++	evtpriv->c2h_wk_alive = _FALSE;
++}
++#endif
++
++u8 rtw_drvextra_cmd_hdl(_adapter *padapter, unsigned char *pbuf)
++{
++	struct drvextra_cmd_parm *pdrvextra_cmd;
++
++	if(!pbuf)
++		return H2C_PARAMETERS_ERROR;
++
++	pdrvextra_cmd = (struct drvextra_cmd_parm*)pbuf;
++	
++	switch(pdrvextra_cmd->ec_id)
++	{
++		case DYNAMIC_CHK_WK_CID:
++			dynamic_chk_wk_hdl(padapter, pdrvextra_cmd->pbuf, pdrvextra_cmd->type_size);
++			break;
++		case POWER_SAVING_CTRL_WK_CID:
++			power_saving_wk_hdl(padapter, pdrvextra_cmd->pbuf, pdrvextra_cmd->type_size);	
++			break;
++#ifdef CONFIG_LPS
++		case LPS_CTRL_WK_CID:
++			lps_ctrl_wk_hdl(padapter, (u8)pdrvextra_cmd->type_size);
++			break;
++#endif
++#ifdef CONFIG_ANTENNA_DIVERSITY
++		case ANT_SELECT_WK_CID:
++			antenna_select_wk_hdl(padapter, pdrvextra_cmd->type_size);
++			break;
++#endif
++#ifdef CONFIG_P2P_PS
++		case P2P_PS_WK_CID:
++			p2p_ps_wk_hdl(padapter, pdrvextra_cmd->type_size);
++			break;
++#endif // CONFIG_P2P_PS
++		case P2P_PROTO_WK_CID:
++			//	Commented by Albert 2011/07/01
++			//	I used the type_size as the type command
++			p2p_protocol_wk_hdl( padapter, pdrvextra_cmd->type_size );
++			break;
++#ifdef CONFIG_AP_MODE
++		case CHECK_HIQ_WK_CID:
++			rtw_chk_hi_queue_hdl(padapter);
++			break;
++#endif //CONFIG_AP_MODE
++#ifdef CONFIG_INTEL_WIDI
++		case INTEl_WIDI_WK_CID:
++			intel_widi_wk_hdl(padapter, pdrvextra_cmd->type_size, pdrvextra_cmd->pbuf);
++			break;
++#endif //CONFIG_INTEL_WIDI
++		//add for CONFIG_IEEE80211W, none 11w can use it
++		case RESET_SECURITYPRIV:
++			reset_securitypriv_hdl(padapter);
++			break;
++		case FREE_ASSOC_RESOURCES:
++			free_assoc_resources_hdl(padapter);
++			break;
++		case C2H_WK_CID:
++			c2h_evt_hdl(padapter, (struct c2h_evt_hdr *)pdrvextra_cmd->pbuf, NULL);
++			break;
++
++		default:
++			break;
++	}
++
++
++	if(pdrvextra_cmd->pbuf && pdrvextra_cmd->type_size>0)
++	{
++		rtw_mfree(pdrvextra_cmd->pbuf, pdrvextra_cmd->type_size);
++	}
++
++
++	return H2C_SUCCESS;
++
++}
++
++void rtw_survey_cmd_callback(_adapter*	padapter ,  struct cmd_obj *pcmd)
++{
++	struct 	mlme_priv *pmlmepriv = &padapter->mlmepriv;
++
++_func_enter_;
++
++	if(pcmd->res == H2C_DROPPED)
++	{
++		//TODO: cancel timer and do timeout handler directly...
++		//need to make timeout handlerOS independent
++		_set_timer(&pmlmepriv->scan_to_timer, 1);
++	}
++	else if (pcmd->res != H2C_SUCCESS) {
++		_set_timer(&pmlmepriv->scan_to_timer, 1);
++		RT_TRACE(_module_rtl871x_cmd_c_,_drv_err_,("\n ********Error: MgntActrtw_set_802_11_bssid_LIST_SCAN Fail ************\n\n."));
++	} 
++
++	// free cmd
++	rtw_free_cmd_obj(pcmd);
++
++_func_exit_;	
++}
++void rtw_disassoc_cmd_callback(_adapter*	padapter,  struct cmd_obj *pcmd)
++{
++	_irqL	irqL;
++	struct 	mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	
++_func_enter_;	
++
++	if (pcmd->res != H2C_SUCCESS)
++	{
++		_enter_critical_bh(&pmlmepriv->lock, &irqL);
++		set_fwstate(pmlmepriv, _FW_LINKED);
++		_exit_critical_bh(&pmlmepriv->lock, &irqL);
++				
++		RT_TRACE(_module_rtl871x_cmd_c_,_drv_err_,("\n ***Error: disconnect_cmd_callback Fail ***\n."));
++
++		goto exit;
++	}
++#ifdef CONFIG_BR_EXT
++	else //clear bridge database
++		nat25_db_cleanup(padapter);
++#endif //CONFIG_BR_EXT
++
++	// free cmd
++	rtw_free_cmd_obj(pcmd);
++	
++exit:
++	
++_func_exit_;	
++}
++
++
++void rtw_joinbss_cmd_callback(_adapter*	padapter,  struct cmd_obj *pcmd)
++{
++	struct 	mlme_priv *pmlmepriv = &padapter->mlmepriv;
++
++_func_enter_;	
++
++	if(pcmd->res == H2C_DROPPED)
++	{
++		//TODO: cancel timer and do timeout handler directly...
++		//need to make timeout handlerOS independent
++		_set_timer(&pmlmepriv->assoc_timer, 1);
++	}
++	else if(pcmd->res != H2C_SUCCESS)
++	{				
++		RT_TRACE(_module_rtl871x_cmd_c_,_drv_err_,("********Error:rtw_select_and_join_from_scanned_queue Wait Sema  Fail ************\n"));
++		_set_timer(&pmlmepriv->assoc_timer, 1);	
++	}
++	
++	rtw_free_cmd_obj(pcmd);
++	
++_func_exit_;	
++}
++
++void rtw_createbss_cmd_callback(_adapter *padapter, struct cmd_obj *pcmd)
++{	
++	_irqL irqL;
++	u8 timer_cancelled;
++	struct sta_info *psta = NULL;
++	struct wlan_network *pwlan = NULL;		
++	struct 	mlme_priv *pmlmepriv = &padapter->mlmepriv;	
++	WLAN_BSSID_EX *pnetwork = (WLAN_BSSID_EX *)pcmd->parmbuf;
++	struct wlan_network *tgt_network = &(pmlmepriv->cur_network);
++
++_func_enter_;	
++
++	if((pcmd->res != H2C_SUCCESS))
++	{	
++		RT_TRACE(_module_rtl871x_cmd_c_,_drv_err_,("\n ********Error: rtw_createbss_cmd_callback  Fail ************\n\n."));
++		_set_timer(&pmlmepriv->assoc_timer, 1 );		
++	}
++	
++	_cancel_timer(&pmlmepriv->assoc_timer, &timer_cancelled);
++
++#ifdef CONFIG_FW_MLMLE
++       //endian_convert
++	pnetwork->Length = le32_to_cpu(pnetwork->Length);
++  	pnetwork->Ssid.SsidLength = le32_to_cpu(pnetwork->Ssid.SsidLength);
++	pnetwork->Privacy =le32_to_cpu(pnetwork->Privacy);
++	pnetwork->Rssi = le32_to_cpu(pnetwork->Rssi);
++	pnetwork->NetworkTypeInUse =le32_to_cpu(pnetwork->NetworkTypeInUse);	
++	pnetwork->Configuration.ATIMWindow = le32_to_cpu(pnetwork->Configuration.ATIMWindow);
++	//pnetwork->Configuration.BeaconPeriod = le32_to_cpu(pnetwork->Configuration.BeaconPeriod);
++	pnetwork->Configuration.DSConfig =le32_to_cpu(pnetwork->Configuration.DSConfig);
++	pnetwork->Configuration.FHConfig.DwellTime=le32_to_cpu(pnetwork->Configuration.FHConfig.DwellTime);
++	pnetwork->Configuration.FHConfig.HopPattern=le32_to_cpu(pnetwork->Configuration.FHConfig.HopPattern);
++	pnetwork->Configuration.FHConfig.HopSet=le32_to_cpu(pnetwork->Configuration.FHConfig.HopSet);
++	pnetwork->Configuration.FHConfig.Length=le32_to_cpu(pnetwork->Configuration.FHConfig.Length);	
++	pnetwork->Configuration.Length = le32_to_cpu(pnetwork->Configuration.Length);
++	pnetwork->InfrastructureMode = le32_to_cpu(pnetwork->InfrastructureMode);
++	pnetwork->IELength = le32_to_cpu(pnetwork->IELength);
++#endif
++	
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++	
++	
++	if(check_fwstate(pmlmepriv, WIFI_AP_STATE) )
++	{
++		psta = rtw_get_stainfo(&padapter->stapriv, pnetwork->MacAddress);
++		if(!psta)
++		{
++		psta = rtw_alloc_stainfo(&padapter->stapriv, pnetwork->MacAddress);
++		if (psta == NULL) 
++		{ 
++			RT_TRACE(_module_rtl871x_cmd_c_,_drv_err_,("\nCan't alloc sta_info when createbss_cmd_callback\n"));
++			goto createbss_cmd_fail ;
++		}
++		}	
++			
++		rtw_indicate_connect( padapter);
++	}
++	else
++	{	
++		_irqL	irqL;
++
++		pwlan = _rtw_alloc_network(pmlmepriv);
++		_enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++		if ( pwlan == NULL)
++		{
++			pwlan = rtw_get_oldest_wlan_network(&pmlmepriv->scanned_queue);
++			if( pwlan == NULL)
++			{
++				RT_TRACE(_module_rtl871x_cmd_c_,_drv_err_,("\n Error:  can't get pwlan in rtw_joinbss_event_callback \n"));
++				_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++				goto createbss_cmd_fail;
++			}
++			pwlan->last_scanned = rtw_get_current_time();			
++		}	
++		else
++		{
++			rtw_list_insert_tail(&(pwlan->list), &pmlmepriv->scanned_queue.queue);
++		}
++				
++		pnetwork->Length = get_WLAN_BSSID_EX_sz(pnetwork);
++		_rtw_memcpy(&(pwlan->network), pnetwork, pnetwork->Length);
++		//pwlan->fixed = _TRUE;
++
++		//rtw_list_insert_tail(&(pwlan->list), &pmlmepriv->scanned_queue.queue);
++
++		// copy pdev_network information to 	pmlmepriv->cur_network
++		_rtw_memcpy(&tgt_network->network, pnetwork, (get_WLAN_BSSID_EX_sz(pnetwork)));
++
++		// reset DSConfig
++		//tgt_network->network.Configuration.DSConfig = (u32)rtw_ch2freq(pnetwork->Configuration.DSConfig);
++
++		_clr_fwstate_(pmlmepriv, _FW_UNDER_LINKING);
++
++#if 0		
++		if((pmlmepriv->fw_state) & WIFI_AP_STATE)
++		{
++			psta = rtw_alloc_stainfo(&padapter->stapriv, pnetwork->MacAddress);
++
++			if (psta == NULL) { // for AP Mode & Adhoc Master Mode
++				RT_TRACE(_module_rtl871x_cmd_c_,_drv_err_,("\nCan't alloc sta_info when createbss_cmd_callback\n"));
++				goto createbss_cmd_fail ;
++			}
++			
++			rtw_indicate_connect( padapter);
++		}
++		else {
++
++			//rtw_indicate_disconnect(dev);
++		}		
++#endif
++		_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++		// we will set _FW_LINKED when there is one more sat to join us (rtw_stassoc_event_callback)
++			
++	}
++
++createbss_cmd_fail:
++	
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++
++	rtw_free_cmd_obj(pcmd);
++	
++_func_exit_;	
++
++}
++
++
++
++void rtw_setstaKey_cmdrsp_callback(_adapter*	padapter ,  struct cmd_obj *pcmd)
++{
++	
++	struct sta_priv * pstapriv = &padapter->stapriv;
++	struct set_stakey_rsp* psetstakey_rsp = (struct set_stakey_rsp*) (pcmd->rsp);
++	struct sta_info*	psta = rtw_get_stainfo(pstapriv, psetstakey_rsp->addr);
++
++_func_enter_;	
++
++	if(psta==NULL)
++	{
++		RT_TRACE(_module_rtl871x_cmd_c_,_drv_err_,("\nERROR: rtw_setstaKey_cmdrsp_callback => can't get sta_info \n\n"));
++		goto exit;
++	}
++	
++	//psta->aid = psta->mac_id = psetstakey_rsp->keyid; //CAM_ID(CAM_ENTRY)
++	
++exit:	
++
++	rtw_free_cmd_obj(pcmd);
++	
++_func_exit_;	
++
++}
++void rtw_setassocsta_cmdrsp_callback(_adapter*	padapter,  struct cmd_obj *pcmd)
++{
++	_irqL	irqL;
++	struct sta_priv * pstapriv = &padapter->stapriv;
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;	
++	struct set_assocsta_parm* passocsta_parm = (struct set_assocsta_parm*)(pcmd->parmbuf);
++	struct set_assocsta_rsp* passocsta_rsp = (struct set_assocsta_rsp*) (pcmd->rsp);		
++	struct sta_info*	psta = rtw_get_stainfo(pstapriv, passocsta_parm->addr);
++
++_func_enter_;	
++	
++	if(psta==NULL)
++	{
++		RT_TRACE(_module_rtl871x_cmd_c_,_drv_err_,("\nERROR: setassocsta_cmdrsp_callbac => can't get sta_info \n\n"));
++		goto exit;
++	}
++	
++	psta->aid = psta->mac_id = passocsta_rsp->cam_id;
++
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++
++	if ((check_fwstate(pmlmepriv, WIFI_MP_STATE) == _TRUE) && (check_fwstate(pmlmepriv, _FW_UNDER_LINKING) == _TRUE))           	
++		_clr_fwstate_(pmlmepriv, _FW_UNDER_LINKING);
++
++       set_fwstate(pmlmepriv, _FW_LINKED);       	   
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++
++exit:	  
++	rtw_free_cmd_obj(pcmd);
++
++_func_exit_;	  
++}
++
++void rtw_getrttbl_cmd_cmdrsp_callback(_adapter*	padapter,  struct cmd_obj *pcmd);
++void rtw_getrttbl_cmd_cmdrsp_callback(_adapter*	padapter,  struct cmd_obj *pcmd)
++{
++_func_enter_;	
++	  
++	rtw_free_cmd_obj(pcmd);
++#ifdef CONFIG_MP_INCLUDED
++	padapter->mppriv.workparam.bcompleted=_TRUE;
++#endif
++
++_func_exit_;	  
++
++}
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_debug.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_debug.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_debug.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_debug.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,1337 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _RTW_DEBUG_C_
++
++
++#include <rtw_debug.h>
++#include <../hal/dm.h>
++
++//#ifdef CONFIG_DEBUG_RTL871X
++
++	u32 GlobalDebugLevel = _drv_err_;
++
++	u64 GlobalDebugComponents = \
++			_module_rtl871x_xmit_c_ |
++			_module_xmit_osdep_c_ |
++			_module_rtl871x_recv_c_ |
++			_module_recv_osdep_c_ |
++			_module_rtl871x_mlme_c_ |
++			_module_mlme_osdep_c_ |
++			_module_rtl871x_sta_mgt_c_ |
++			_module_rtl871x_cmd_c_ |
++			_module_cmd_osdep_c_ |
++			_module_rtl871x_io_c_ |
++			_module_io_osdep_c_ |
++			_module_os_intfs_c_|
++			_module_rtl871x_security_c_|
++			_module_rtl871x_eeprom_c_|
++			_module_hal_init_c_|
++			_module_hci_hal_init_c_|
++			_module_rtl871x_ioctl_c_|
++			_module_rtl871x_ioctl_set_c_|
++			_module_rtl871x_ioctl_query_c_|
++			_module_rtl871x_pwrctrl_c_|
++			_module_hci_intfs_c_|
++			_module_hci_ops_c_|
++			_module_hci_ops_os_c_|
++			_module_rtl871x_ioctl_os_c|
++			_module_rtl8712_cmd_c_|
++			_module_hal_xmit_c_|
++			_module_rtl8712_recv_c_ |
++			_module_mp_ |
++			_module_efuse_;
++
++//#endif
++
++#ifdef CONFIG_PROC_DEBUG
++#include <rtw_version.h>
++
++int proc_get_drv_version(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	
++	int len = 0;
++
++	len += snprintf(page + len, count - len, "%s\n", DRIVERVERSION);
++				
++	*eof = 1;
++	return len;
++}
++
++int proc_get_log_level(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	
++	int len = 0;
++
++	len += snprintf(page + len, count - len,
++		"log_level:%d\n",
++		GlobalDebugLevel
++		);
++
++	*eof = 1;
++	return len;
++}
++
++int proc_set_log_level(struct file *file, const char *buffer,
++		unsigned long count, void *data)
++{
++	struct net_device *dev = (struct net_device *)data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	char tmp[32];
++	u32 is_signal_dbg;
++
++	if (count < 1)
++		return -EFAULT;
++
++	if (buffer && !copy_from_user(tmp, buffer, sizeof(tmp))) {		
++
++		int num = sscanf(tmp, "%d ", &is_signal_dbg);
++
++		if( is_signal_dbg >= 0 && is_signal_dbg < 10 )
++		{
++			GlobalDebugLevel= is_signal_dbg;
++			printk("%d\n", GlobalDebugLevel);
++		}
++	}
++	
++	return count;
++	
++}
++
++#ifdef DBG_MEM_ALLOC
++int proc_get_mstat(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{	
++	int len = 0;
++
++	len += _rtw_mstat_dump(page+len, count-len);
++	*eof = 1;
++
++	return len;
++}
++#endif /* DBG_MEM_ALLOC */
++
++int proc_get_write_reg(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	*eof = 1;
++	return 0;
++}
++
++int proc_set_write_reg(struct file *file, const char *buffer,
++		unsigned long count, void *data)
++{
++	struct net_device *dev = (struct net_device *)data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	char tmp[32];
++	u32 addr, val, len;
++
++	if (count < 3)
++	{
++		DBG_871X("argument size is less than 3\n");
++		return -EFAULT;
++	}	
++
++	if (buffer && !copy_from_user(tmp, buffer, sizeof(tmp))) {		
++
++		int num = sscanf(tmp, "%x %x %x", &addr, &val, &len);
++
++		if (num !=  3) {
++			DBG_871X("invalid write_reg parameter!\n");
++			return count;
++		}
++
++		switch(len)
++		{
++			case 1:
++				rtw_write8(padapter, addr, (u8)val);				
++				break;
++			case 2:
++				rtw_write16(padapter, addr, (u16)val);				
++				break;
++			case 4:
++				rtw_write32(padapter, addr, val);				
++				break;
++			default:
++				DBG_871X("error write length=%d", len);
++				break;
++		}			
++		
++	}
++	
++	return count;
++	
++}
++
++static u32 proc_get_read_addr=0xeeeeeeee;
++static u32 proc_get_read_len=0x4;
++
++int proc_get_read_reg(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{	
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);	
++	
++	int len = 0;
++
++	if(proc_get_read_addr==0xeeeeeeee)
++	{
++		*eof = 1;
++		return len;
++	}	
++
++	switch(proc_get_read_len)
++	{
++		case 1:			
++			len += snprintf(page + len, count - len, "rtw_read8(0x%x)=0x%x\n", proc_get_read_addr, rtw_read8(padapter, proc_get_read_addr));
++			break;
++		case 2:
++			len += snprintf(page + len, count - len, "rtw_read16(0x%x)=0x%x\n", proc_get_read_addr, rtw_read16(padapter, proc_get_read_addr));
++			break;
++		case 4:
++			len += snprintf(page + len, count - len, "rtw_read32(0x%x)=0x%x\n", proc_get_read_addr, rtw_read32(padapter, proc_get_read_addr));
++			break;
++		default:
++			len += snprintf(page + len, count - len, "error read length=%d\n", proc_get_read_len);
++			break;
++	}
++
++	*eof = 1;
++	return len;
++
++}
++
++int proc_set_read_reg(struct file *file, const char *buffer,
++		unsigned long count, void *data)
++{
++	char tmp[16];
++	u32 addr, len;
++
++	if (count < 2)
++	{
++		DBG_871X("argument size is less than 2\n");
++		return -EFAULT;
++	}	
++
++	if (buffer && !copy_from_user(tmp, buffer, sizeof(tmp))) {		
++
++		int num = sscanf(tmp, "%x %x", &addr, &len);
++
++		if (num !=  2) {
++			DBG_871X("invalid read_reg parameter!\n");
++			return count;
++		}
++
++		proc_get_read_addr = addr;
++		
++		proc_get_read_len = len;
++	}
++	
++	return count;
++
++}
++
++int proc_get_fwstate(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	
++	int len = 0;
++
++	len += snprintf(page + len, count - len, "fwstate=0x%x\n", get_fwstate(pmlmepriv));
++				
++	*eof = 1;
++	return len;
++}
++
++int proc_get_sec_info(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct security_priv *psecuritypriv = &padapter->securitypriv;
++	
++	int len = 0;
++
++	len += snprintf(page + len, count - len, "auth_alg=0x%x, enc_alg=0x%x, auth_type=0x%x, enc_type=0x%x\n", 
++						psecuritypriv->dot11AuthAlgrthm, psecuritypriv->dot11PrivacyAlgrthm,
++						psecuritypriv->ndisauthtype, psecuritypriv->ndisencryptstatus);
++				
++	*eof = 1;
++	return len;
++}
++
++int proc_get_mlmext_state(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	
++	int len = 0;
++
++	len += snprintf(page + len, count - len, "pmlmeinfo->state=0x%x\n", pmlmeinfo->state);
++				
++	*eof = 1;
++	return len;
++}
++
++int proc_get_qos_option(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	
++	int len = 0;
++
++	len += snprintf(page + len, count - len, "qos_option=%d\n", pmlmepriv->qospriv.qos_option);
++				
++	*eof = 1;
++	return len;
++
++}
++
++int proc_get_ht_option(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	
++	int len = 0;
++
++	len += snprintf(page + len, count - len, "ht_option=%d\n", pmlmepriv->htpriv.ht_option);
++				
++	*eof = 1;
++	return len;
++}
++
++int proc_get_rf_info(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	int len = 0;
++
++	len += snprintf(page + len, count - len, "cur_ch=%d, cur_bw=%d, cur_ch_offet=%d\n"
++		"oper_ch=%d, oper_bw=%d, oper_ch_offet=%d\n",
++		pmlmeext->cur_channel, pmlmeext->cur_bwmode, pmlmeext->cur_ch_offset,
++		rtw_get_oper_ch(padapter), rtw_get_oper_bw(padapter), rtw_get_oper_choffset(padapter));
++	*eof = 1;
++
++	return len;
++}
++
++int proc_get_ap_info(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct sta_info *psta;
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
++	struct wlan_network *cur_network = &(pmlmepriv->cur_network);
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	int len = 0;
++
++	psta = rtw_get_stainfo(pstapriv, cur_network->network.MacAddress);
++	if(psta)
++	{
++		int i;
++		struct recv_reorder_ctrl *preorder_ctrl;
++					
++		len += snprintf(page + len, count - len, "SSID=%s\n", cur_network->network.Ssid.Ssid);		
++		len += snprintf(page + len, count - len, "sta's macaddr:" MAC_FMT "\n", MAC_ARG(psta->hwaddr));
++		len += snprintf(page + len, count - len, "cur_channel=%d, cur_bwmode=%d, cur_ch_offset=%d\n", pmlmeext->cur_channel, pmlmeext->cur_bwmode, pmlmeext->cur_ch_offset);		
++		len += snprintf(page + len, count - len, "rtsen=%d, cts2slef=%d\n", psta->rtsen, psta->cts2self);
++		len += snprintf(page + len, count - len, "qos_en=%d, ht_en=%d, init_rate=%d\n", psta->qos_option, psta->htpriv.ht_option, psta->init_rate);	
++		len += snprintf(page + len, count - len, "state=0x%x, aid=%d, macid=%d, raid=%d\n", psta->state, psta->aid, psta->mac_id, psta->raid);	
++		len += snprintf(page + len, count - len, "bwmode=%d, ch_offset=%d, sgi=%d\n", psta->htpriv.bwmode, psta->htpriv.ch_offset, psta->htpriv.sgi);						
++		len += snprintf(page + len, count - len, "ampdu_enable = %d\n", psta->htpriv.ampdu_enable);	
++		len += snprintf(page + len, count - len, "agg_enable_bitmap=%x, candidate_tid_bitmap=%x\n", psta->htpriv.agg_enable_bitmap, psta->htpriv.candidate_tid_bitmap);
++					
++		for(i=0;i<16;i++)
++		{							
++			preorder_ctrl = &psta->recvreorder_ctrl[i];
++			if(preorder_ctrl->enable)
++			{
++				len += snprintf(page + len, count - len, "tid=%d, indicate_seq=%d\n", i, preorder_ctrl->indicate_seq);
++			}
++		}	
++							
++	}
++	else
++	{							
++		len += snprintf(page + len, count - len, "can't get sta's macaddr, cur_network's macaddr:" MAC_FMT "\n", MAC_ARG(cur_network->network.MacAddress));
++	}
++
++	*eof = 1;
++	return len;
++
++}
++
++int proc_get_adapter_state(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	int len = 0;
++	
++	len += snprintf(page + len, count - len, "bSurpriseRemoved=%d, bDriverStopped=%d\n", 
++						padapter->bSurpriseRemoved, padapter->bDriverStopped);
++
++	*eof = 1;
++	return len;
++
++}
++	
++int proc_get_trx_info(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	int i;
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
++	struct recv_priv  *precvpriv = &padapter->recvpriv;
++	struct dvobj_priv	*pdvobj = adapter_to_dvobj(padapter);
++        struct hw_xmit *phwxmit;
++	int len = 0;
++	
++	len += snprintf(page + len, count - len, "free_xmitbuf_cnt=%d, free_xmitframe_cnt=%d"
++				", free_ext_xmitbuf_cnt=%d, free_xframe_ext_cnt=%d"
++				", free_recvframe_cnt=%d\n",
++				pxmitpriv->free_xmitbuf_cnt, pxmitpriv->free_xmitframe_cnt,
++				pxmitpriv->free_xmit_extbuf_cnt, pxmitpriv->free_xframe_ext_cnt,
++				precvpriv->free_recvframe_cnt);
++#ifdef CONFIG_USB_HCI
++	len += snprintf(page + len, count - len, "rx_urb_pending_cnt=%d\n", precvpriv->rx_pending_cnt);
++#endif
++
++	len += snprintf(page + len, count - len, "recvbuf_skb_alloc_fail_cnt=%d\n", precvpriv->recvbuf_skb_alloc_fail_cnt);
++	len += snprintf(page + len, count - len, "recvbuf_null_cnt=%d\n", precvpriv->recvbuf_null_cnt);
++	len += snprintf(page + len, count - len, "read_port_complete_EINPROGRESS_cnt=%d\n", precvpriv->read_port_complete_EINPROGRESS_cnt);
++	len += snprintf(page + len, count - len, "read_port_complete_other_urb_err_cnt=%d\n", precvpriv->read_port_complete_other_urb_err_cnt);
++	len += snprintf(page + len, count - len, "hw_init_completed=%d\n", padapter->hw_init_completed);
++#ifdef CONFIG_USB_HCI
++	len += snprintf(page + len, count - len, "continual_urb_error=%d\n", atomic_read(&pdvobj->continual_urb_error));
++#endif
++
++        for(i = 0; i < 4; i++) 
++	{
++		phwxmit = pxmitpriv->hwxmits + i;
++		len += snprintf(page + len, count - len, "%d, hwq.accnt=%d\n", i, phwxmit->accnt);
++	}
++
++	*eof = 1;
++	return len;
++
++}
++	
++		
++
++int proc_get_mac_reg_dump1(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	int len = 0;
++	int i,j=1;
++
++	len += snprintf(page + len, count - len, "\n======= MAC REG =======\n");
++
++	for(i=0x0;i<0x300;i+=4)
++	{	
++		if(j%4==1)	len += snprintf(page + len, count - len,"0x%02x",i);
++		len += snprintf(page + len, count - len," 0x%08x ",rtw_read32(padapter,i));		
++		if((j++)%4 == 0)	len += snprintf(page + len, count - len,"\n");	
++	}
++
++	*eof = 1;
++	return len;
++
++}
++
++int proc_get_mac_reg_dump2(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	int len = 0;
++	int i,j=1;
++
++	len += snprintf(page + len, count - len, "\n======= MAC REG =======\n");
++	memset(page, 0, count);
++	for(i=0x300;i<0x600;i+=4)
++	{	
++		if(j%4==1)	len += snprintf(page + len, count - len,"0x%02x",i);
++		len += snprintf(page + len, count - len," 0x%08x ",rtw_read32(padapter,i));		
++		if((j++)%4 == 0)	len += snprintf(page + len, count - len,"\n");	
++	}
++	
++	*eof = 1;
++	return len;
++
++}
++
++int proc_get_mac_reg_dump3(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	int len = 0;
++	int i,j=1;
++
++	len += snprintf(page + len, count - len, "\n======= MAC REG =======\n");
++
++	for(i=0x600;i<0x800;i+=4)
++	{	
++		if(j%4==1)	len += snprintf(page + len, count - len,"0x%02x",i);
++		len += snprintf(page + len, count - len," 0x%08x ",rtw_read32(padapter,i));		
++		if((j++)%4 == 0)	len += snprintf(page + len, count - len,"\n");	
++	}
++
++	*eof = 1;
++	return len;
++
++}
++
++int proc_get_bb_reg_dump1(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);	
++	int len = 0;
++	int i,j=1;		
++
++	len += snprintf(page + len, count - len, "\n======= BB REG =======\n");	
++	for(i=0x800;i<0xB00;i+=4)
++	{
++		if(j%4==1) 	len += snprintf(page + len, count - len,"0x%02x",i);		
++		len += snprintf(page + len, count - len," 0x%08x ",rtw_read32(padapter,i));		
++		if((j++)%4 == 0)	len += snprintf(page + len, count - len,"\n");	
++	}
++	*eof = 1;
++	return len;	
++}
++
++int proc_get_bb_reg_dump2(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);	
++	int len = 0;
++	int i,j=1;		
++
++	len += snprintf(page + len, count - len, "\n======= BB REG =======\n");	
++	for(i=0xB00;i<0xE00;i+=4)
++	{
++		if(j%4==1) 	len += snprintf(page + len, count - len,"0x%02x",i);		
++		len += snprintf(page + len, count - len," 0x%08x ",rtw_read32(padapter,i));		
++		if((j++)%4 == 0)	len += snprintf(page + len, count - len,"\n");	
++	}
++	*eof = 1;
++	return len;	
++}
++
++int proc_get_bb_reg_dump3(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);	
++	int len = 0;
++	int i,j=1;		
++
++	len += snprintf(page + len, count - len, "\n======= BB REG =======\n");	
++	for(i=0xE00;i<0x1000;i+=4)
++	{
++		if(j%4==1) 	len += snprintf(page + len, count - len,"0x%02x",i);		
++		len += snprintf(page + len, count - len," 0x%08x ",rtw_read32(padapter,i));		
++		if((j++)%4 == 0)	len += snprintf(page + len, count - len,"\n");	
++	}
++	*eof = 1;
++	return len;	
++}
++
++int proc_get_rf_reg_dump1(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	int len = 0;
++	int i,j=1,path;
++	u32 value;
++	
++	len += snprintf(page + len, count - len, "\n======= RF REG =======\n");
++	path = 1;
++	len += snprintf(page + len, count - len, "\nRF_Path(%x)\n",path);
++	for(i=0;i<0xC0;i++)
++	{								
++		//value = PHY_QueryRFReg(padapter, (RF90_RADIO_PATH_E)path,i, bMaskDWord);
++		value =rtw_hal_read_rfreg(padapter, path, i, 0xffffffff);
++		if(j%4==1)	len += snprintf(page + len, count - len, "0x%02x ",i);
++		len += snprintf(page + len, count - len, " 0x%08x ",value);
++		if((j++)%4==0)	len += snprintf(page + len, count - len, "\n");	
++	}
++
++	*eof = 1;
++	return len;	
++}
++
++
++int proc_get_rf_reg_dump2(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	int len = 0;
++	int i,j=1,path;
++	u32 value;	
++
++	len += snprintf(page + len, count - len, "\n======= RF REG =======\n");	
++	path = 1;
++	len += snprintf(page + len, count - len, "\nRF_Path(%x)\n",path);
++	for(i=0xC0;i<0x100;i++)
++	{								
++		//value = PHY_QueryRFReg(padapter, (RF90_RADIO_PATH_E)path,i, bMaskDWord);
++		value =rtw_hal_read_rfreg(padapter, path, i, 0xffffffff);
++		if(j%4==1)	len += snprintf(page + len, count - len, "0x%02x ",i);
++		len += snprintf(page + len, count - len, " 0x%08x ",value);
++		if((j++)%4==0)	len += snprintf(page + len, count - len, "\n");	
++	}
++	*eof = 1;
++	return len;	
++}
++
++
++int proc_get_rf_reg_dump3(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	int len = 0;
++	int i,j=1,path;
++	u32 value;	
++
++	len += snprintf(page + len, count - len, "\n======= RF REG =======\n");
++	path = 2;
++	len += snprintf(page + len, count - len, "\nRF_Path(%x)\n",path);
++	for(i=0;i<0xC0;i++)
++	{								
++		//value = PHY_QueryRFReg(padapter, (RF90_RADIO_PATH_E)path,i, bMaskDWord);
++		value =rtw_hal_read_rfreg(padapter, path, i, 0xffffffff);
++		if(j%4==1)	len += snprintf(page + len, count - len, "0x%02x ",i);
++		len += snprintf(page + len, count - len, " 0x%08x ",value);
++		if((j++)%4==0)	len += snprintf(page + len, count - len, "\n");	
++	}
++
++	*eof = 1;
++	return len;	
++}
++
++
++int proc_get_rf_reg_dump4(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	int len = 0;
++	int i,j=1,path;
++	u32 value;
++
++	len += snprintf(page + len, count - len, "\n======= RF REG =======\n");
++	path = 2;
++	len += snprintf(page + len, count - len, "\nRF_Path(%x)\n",path);
++	for(i=0xC0;i<0x100;i++)
++	{								
++		//value = PHY_QueryRFReg(padapter, (RF90_RADIO_PATH_E)path,i, bMaskDWord);
++		value =rtw_hal_read_rfreg(padapter, path, i, 0xffffffff);
++		if(j%4==1)	len += snprintf(page + len, count - len, "0x%02x ",i);
++		len += snprintf(page + len, count - len, " 0x%08x ",value);
++		if((j++)%4==0)	len += snprintf(page + len, count - len, "\n");
++	}
++	*eof = 1;
++	return len;	
++}
++
++
++		
++int proc_get_rx_signal(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	
++	int len = 0;
++
++	len += snprintf(page + len, count - len,
++		"rssi:%d\n"
++		"rxpwdb:%d\n"
++		"signal_strength:%u\n"
++		"signal_qual:%u\n"
++		"noise:%u\n", 
++		padapter->recvpriv.rssi,
++		padapter->recvpriv.rxpwdb,
++		padapter->recvpriv.signal_strength,
++		padapter->recvpriv.signal_qual,
++		padapter->recvpriv.noise
++		);
++				
++	*eof = 1;
++	return len;
++}
++
++int proc_set_rx_signal(struct file *file, const char *buffer,
++		unsigned long count, void *data)
++{
++	struct net_device *dev = (struct net_device *)data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	char tmp[32];
++	u32 is_signal_dbg, signal_strength;
++
++	if (count < 1)
++		return -EFAULT;
++
++	if (buffer && !copy_from_user(tmp, buffer, sizeof(tmp))) {		
++
++		int num = sscanf(tmp, "%u %u", &is_signal_dbg, &signal_strength);
++
++		is_signal_dbg = is_signal_dbg==0?0:1;
++		
++		if(is_signal_dbg && num!=2)
++			return count;
++			
++		signal_strength = signal_strength>100?100:signal_strength;
++		signal_strength = signal_strength<0?0:signal_strength;
++
++		padapter->recvpriv.is_signal_dbg = is_signal_dbg;
++		padapter->recvpriv.signal_strength_dbg=signal_strength;
++
++		if(is_signal_dbg)
++			DBG_871X("set %s %u\n", "DBG_SIGNAL_STRENGTH", signal_strength);
++		else
++			DBG_871X("set %s\n", "HW_SIGNAL_STRENGTH");
++		
++	}
++	
++	return count;
++	
++}
++
++int proc_get_ht_enable(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct registry_priv	*pregpriv = &padapter->registrypriv;
++	
++	int len = 0;
++	
++	if(pregpriv)
++		len += snprintf(page + len, count - len,
++			"%d\n",
++			pregpriv->ht_enable
++			);
++
++	*eof = 1;
++	return len;
++}
++
++int proc_set_ht_enable(struct file *file, const char *buffer,
++		unsigned long count, void *data)
++{
++	struct net_device *dev = (struct net_device *)data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct registry_priv	*pregpriv = &padapter->registrypriv;
++	char tmp[32];
++	u32 mode;
++
++	if (count < 1)
++		return -EFAULT;
++
++	if (buffer && !copy_from_user(tmp, buffer, sizeof(tmp))) {		
++
++		int num = sscanf(tmp, "%d ", &mode);
++
++		if( pregpriv && mode >= 0 && mode < 2 )
++		{
++			pregpriv->ht_enable= mode;
++			printk("ht_enable=%d\n", pregpriv->ht_enable);
++		}
++	}
++	
++	return count;
++	
++}
++
++
++int proc_get_cbw40_enable(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct registry_priv	*pregpriv = &padapter->registrypriv;
++	
++	int len = 0;
++	
++	if(pregpriv)
++		len += snprintf(page + len, count - len,
++			"%d\n",
++			pregpriv->cbw40_enable
++			);
++
++	*eof = 1;
++	return len;
++}
++
++int proc_set_cbw40_enable(struct file *file, const char *buffer,
++		unsigned long count, void *data)
++{
++	struct net_device *dev = (struct net_device *)data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct registry_priv	*pregpriv = &padapter->registrypriv;
++	char tmp[32];
++	u32 mode;
++
++	if (count < 1)
++		return -EFAULT;
++
++	if (buffer && !copy_from_user(tmp, buffer, sizeof(tmp))) {		
++
++		int num = sscanf(tmp, "%d ", &mode);
++
++		if( pregpriv && mode >= 0 && mode < 2 )
++		{
++			pregpriv->cbw40_enable= mode;
++			printk("cbw40_enable=%d\n", mode);
++		}
++	}
++	
++	return count;
++	
++}
++
++int proc_get_ampdu_enable(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct registry_priv	*pregpriv = &padapter->registrypriv;
++	
++	int len = 0;
++	
++	if(pregpriv)
++		len += snprintf(page + len, count - len,
++			"%d\n",
++			pregpriv->ampdu_enable
++			);
++
++	*eof = 1;
++	return len;
++}
++
++int proc_set_ampdu_enable(struct file *file, const char *buffer,
++		unsigned long count, void *data)
++{
++	struct net_device *dev = (struct net_device *)data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct registry_priv	*pregpriv = &padapter->registrypriv;
++	char tmp[32];
++	u32 mode;
++
++	if (count < 1)
++		return -EFAULT;
++
++	if (buffer && !copy_from_user(tmp, buffer, sizeof(tmp))) {		
++
++		int num = sscanf(tmp, "%d ", &mode);
++
++		if( pregpriv && mode >= 0 && mode < 3 )
++		{
++			pregpriv->ampdu_enable= mode;
++			printk("ampdu_enable=%d\n", mode);
++		}
++	}
++	
++	return count;
++	
++}
++
++
++int proc_get_two_path_rssi(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	
++	int len = 0;
++	
++	if(padapter)
++		len += snprintf(page + len, count - len,
++			"%d %d\n",
++			padapter->recvpriv.RxRssi[0],
++			padapter->recvpriv.RxRssi[1]
++			);
++
++	*eof = 1;
++	return len;
++}
++
++int proc_get_rx_stbc(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct registry_priv	*pregpriv = &padapter->registrypriv;
++	
++	int len = 0;
++	
++	if(pregpriv)
++		len += snprintf(page + len, count - len,
++			"%d\n",
++			pregpriv->rx_stbc
++			);
++
++	*eof = 1;
++	return len;
++}
++
++int proc_set_rx_stbc(struct file *file, const char *buffer,
++		unsigned long count, void *data)
++{
++	struct net_device *dev = (struct net_device *)data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct registry_priv	*pregpriv = &padapter->registrypriv;
++	char tmp[32];
++	u32 mode;
++
++	if (count < 1)
++		return -EFAULT;
++
++	if (buffer && !copy_from_user(tmp, buffer, sizeof(tmp))) {		
++
++		int num = sscanf(tmp, "%d ", &mode);
++
++		if( pregpriv && (mode == 0 || mode == 1|| mode == 2|| mode == 3))
++		{
++			pregpriv->rx_stbc= mode;
++			printk("rx_stbc=%d\n", mode);
++		}
++	}
++	
++	return count;
++	
++}
++
++int proc_get_vid(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	u16 VID=0;
++	int len = 0;
++
++	rtw_hal_get_hwreg(padapter, HW_VAR_VID, (u8 *)&VID);	
++	len += snprintf(page + len, count - len,
++		"%04x\n",
++		VID
++		);
++
++	*eof = 1;
++	return len;	
++}
++
++int proc_get_pid(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	u16 PID=0;	
++	int len = 0;
++
++	rtw_hal_get_hwreg(padapter, HW_VAR_PID, (u8 *)&PID);		
++	len += snprintf(page + len, count - len,
++		"%04x\n",
++		PID
++		);
++
++	*eof = 1;
++	return len;	
++}
++
++int proc_get_rssi_disp(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	*eof = 1;
++	return 0;
++}
++
++int proc_set_rssi_disp(struct file *file, const char *buffer,
++		unsigned long count, void *data)
++{
++	struct net_device *dev = (struct net_device *)data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	char tmp[32];
++	u32 enable=0;
++
++	if (count < 1)
++	{
++		DBG_8192C("argument size is less than 1\n");
++		return -EFAULT;
++	}	
++
++	if (buffer && !copy_from_user(tmp, buffer, sizeof(tmp))) {		
++
++		int num = sscanf(tmp, "%x", &enable);
++
++		if (num !=  1) {
++			DBG_8192C("invalid set_rssi_disp parameter!\n");
++			return count;
++		}
++		
++		if(enable)
++		{			
++			DBG_8192C("Turn On Rx RSSI Display Function\n");
++			padapter->bRxRSSIDisplay = enable ;			
++		}
++		else
++		{
++			DBG_8192C("Turn Off Rx RSSI Display Function\n");
++			padapter->bRxRSSIDisplay = 0 ;
++		}
++	
++	}
++	
++	return count;
++	
++}	
++
++		
++#ifdef CONFIG_AP_MODE
++
++int proc_get_all_sta_info(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	_irqL irqL;
++	struct sta_info *psta;
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	int i, j;
++	_list	*plist, *phead;
++	struct recv_reorder_ctrl *preorder_ctrl;
++	int len = 0;	
++						
++
++	len += snprintf(page + len, count - len, "sta_dz_bitmap=0x%x, tim_bitmap=0x%x\n", pstapriv->sta_dz_bitmap, pstapriv->tim_bitmap);
++					
++	_enter_critical_bh(&pstapriv->sta_hash_lock, &irqL);
++
++	for(i=0; i< NUM_STA; i++)
++	{
++		phead = &(pstapriv->sta_hash[i]);
++		plist = get_next(phead);
++		
++		while ((rtw_end_of_queue_search(phead, plist)) == _FALSE)
++		{
++			psta = LIST_CONTAINOR(plist, struct sta_info, hash_list);
++
++			plist = get_next(plist);
++
++			//if(extra_arg == psta->aid)
++			{
++				len += snprintf(page + len, count - len, "sta's macaddr:" MAC_FMT "\n", MAC_ARG(psta->hwaddr));
++				len += snprintf(page + len, count - len, "rtsen=%d, cts2slef=%d\n", psta->rtsen, psta->cts2self);
++				len += snprintf(page + len, count - len, "qos_en=%d, ht_en=%d, init_rate=%d\n", psta->qos_option, psta->htpriv.ht_option, psta->init_rate);	
++				len += snprintf(page + len, count - len, "state=0x%x, aid=%d, macid=%d, raid=%d\n", psta->state, psta->aid, psta->mac_id, psta->raid);	
++				len += snprintf(page + len, count - len, "bwmode=%d, ch_offset=%d, sgi=%d\n", psta->htpriv.bwmode, psta->htpriv.ch_offset, psta->htpriv.sgi);						
++				len += snprintf(page + len, count - len, "ampdu_enable = %d\n", psta->htpriv.ampdu_enable);									
++				len += snprintf(page + len, count - len, "agg_enable_bitmap=%x, candidate_tid_bitmap=%x\n", psta->htpriv.agg_enable_bitmap, psta->htpriv.candidate_tid_bitmap);
++				len += snprintf(page + len, count - len, "sleepq_len=%d\n", psta->sleepq_len);
++				len += snprintf(page + len, count - len, "capability=0x%x\n", psta->capability);
++				len += snprintf(page + len, count - len, "flags=0x%x\n", psta->flags);
++				len += snprintf(page + len, count - len, "wpa_psk=0x%x\n", psta->wpa_psk);
++				len += snprintf(page + len, count - len, "wpa2_group_cipher=0x%x\n", psta->wpa2_group_cipher);
++				len += snprintf(page + len, count - len, "wpa2_pairwise_cipher=0x%x\n", psta->wpa2_pairwise_cipher);
++				len += snprintf(page + len, count - len, "qos_info=0x%x\n", psta->qos_info);
++				len += snprintf(page + len, count - len, "dot118021XPrivacy=0x%x\n", psta->dot118021XPrivacy);
++								
++				for(j=0;j<16;j++)
++				{							
++					preorder_ctrl = &psta->recvreorder_ctrl[j];
++					if(preorder_ctrl->enable)
++					{
++						len += snprintf(page + len, count - len, "tid=%d, indicate_seq=%d\n", j, preorder_ctrl->indicate_seq);
++					}
++				}		
++									
++			}							
++			
++		}
++		
++	}
++	
++	_exit_critical_bh(&pstapriv->sta_hash_lock, &irqL);
++
++	*eof = 1;
++	return len;
++
++}
++	
++#endif		
++
++#ifdef DBG_MEMORY_LEAK
++#include <asm/atomic.h>
++extern atomic_t _malloc_cnt;;
++extern atomic_t _malloc_size;;
++
++int proc_get_malloc_cnt(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	
++	int len = 0;
++
++	len += snprintf(page + len, count - len, "_malloc_cnt=%d\n", atomic_read(&_malloc_cnt));
++	len += snprintf(page + len, count - len, "_malloc_size=%d\n", atomic_read(&_malloc_size));
++				
++	*eof = 1;
++	return len;
++}
++#endif /* DBG_MEMORY_LEAK */
++
++#ifdef CONFIG_FIND_BEST_CHANNEL
++int proc_get_best_channel(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
++	int len = 0;
++	u32 i, best_channel_24G = 1, best_channel_5G = 36, index_24G = 0, index_5G = 0;
++
++	for (i=0; pmlmeext->channel_set[i].ChannelNum !=0; i++) {
++		if ( pmlmeext->channel_set[i].ChannelNum == 1)
++			index_24G = i;
++		if ( pmlmeext->channel_set[i].ChannelNum == 36)
++			index_5G = i;
++	}	
++	
++	for (i=0; pmlmeext->channel_set[i].ChannelNum !=0; i++) {
++		// 2.4G
++		if ( pmlmeext->channel_set[i].ChannelNum == 6 ) {
++			if ( pmlmeext->channel_set[i].rx_count < pmlmeext->channel_set[index_24G].rx_count ) {
++				index_24G = i;
++				best_channel_24G = pmlmeext->channel_set[i].ChannelNum;
++			}
++		}
++
++		// 5G
++		if ( pmlmeext->channel_set[i].ChannelNum >= 36
++			&& pmlmeext->channel_set[i].ChannelNum < 140 ) {
++			 // Find primary channel
++			if ( (( pmlmeext->channel_set[i].ChannelNum - 36) % 8 == 0)
++				&& (pmlmeext->channel_set[i].rx_count < pmlmeext->channel_set[index_5G].rx_count) ) {
++				index_5G = i;
++				best_channel_5G = pmlmeext->channel_set[i].ChannelNum;
++			}
++		}
++
++		if ( pmlmeext->channel_set[i].ChannelNum >= 149
++			&& pmlmeext->channel_set[i].ChannelNum < 165) {
++			 // find primary channel
++			if ( (( pmlmeext->channel_set[i].ChannelNum - 149) % 8 == 0)
++				&& (pmlmeext->channel_set[i].rx_count < pmlmeext->channel_set[index_5G].rx_count) ) {
++				index_5G = i;
++				best_channel_5G = pmlmeext->channel_set[i].ChannelNum;
++			}
++		}
++#if 1 // debug
++		len += snprintf(page + len, count - len, "The rx cnt of channel %3d = %d\n", 
++					pmlmeext->channel_set[i].ChannelNum, pmlmeext->channel_set[i].rx_count);
++#endif
++	}
++	
++	len += snprintf(page + len, count - len, "best_channel_5G = %d\n", best_channel_5G);
++	len += snprintf(page + len, count - len, "best_channel_24G = %d\n", best_channel_24G);
++
++	*eof = 1;
++	return len;
++
++}
++
++int proc_set_best_channel(struct file *file, const char *buffer,
++		unsigned long count, void *data)
++{
++	struct net_device *dev = (struct net_device *)data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
++	char tmp[32];
++
++	if(count < 1)
++		return -EFAULT;
++
++	if(buffer && !copy_from_user(tmp, buffer, sizeof(tmp)))
++	{
++		int i;
++		for(i = 0; pmlmeext->channel_set[i].ChannelNum != 0; i++)
++		{
++			pmlmeext->channel_set[i].rx_count = 0;
++		}
++
++		DBG_871X("set %s\n", "Clean Best Channel Count");
++	}
++
++	return count;
++}
++#endif /* CONFIG_FIND_BEST_CHANNEL */
++
++#if defined(DBG_CONFIG_ERROR_DETECT)
++#include <rtw_sreset.h>
++int proc_get_sreset(char *page, char **start, off_t offset, int count, int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	
++	int len = 0;
++	
++	*eof = 1;
++	return len;
++}
++
++int proc_set_sreset(struct file *file, const char *buffer, unsigned long count, void *data)
++{
++	struct net_device *dev = (struct net_device *)data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	char tmp[32];
++	s32 trigger_point;
++
++	if (count < 1)
++		return -EFAULT;
++
++	if (buffer && !copy_from_user(tmp, buffer, sizeof(tmp))) {		
++
++		int num = sscanf(tmp, "%d", &trigger_point);
++
++		if (trigger_point == SRESET_TGP_NULL)
++			rtw_hal_sreset_reset(padapter);
++		else
++			sreset_set_trigger_point(padapter, trigger_point);
++	}
++	
++	return count;
++	
++}
++#endif /* DBG_CONFIG_ERROR_DETECT */
++
++#ifdef CONFIG_DM_ADAPTIVITY
++int proc_get_dm_adaptivity(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data)
++{
++	struct net_device *dev = data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	int len = 0;
++
++	len += dm_adaptivity_get_parm_str(padapter, page, count);
++
++	*eof = 1;
++	return len;
++}
++
++int proc_set_dm_adaptivity(struct file *file, const char *buffer,
++		unsigned long count, void *data)
++{
++	struct net_device *dev = (struct net_device *)data;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	char tmp[32];
++	u32 TH_L2H_ini;
++	s8 TH_EDCCA_HL_diff;
++	u32 IGI_Base;
++	int ForceEDCCA;
++	u8 AdapEn_RSSI;
++	u8 IGI_LowerBound;
++
++	if (count < 1)
++		return -EFAULT;
++
++	if (buffer && !copy_from_user(tmp, buffer, sizeof(tmp))) {
++
++		int num = sscanf(tmp, "%x %hhd %x %d %hhu %hhu",
++			&TH_L2H_ini, &TH_EDCCA_HL_diff, &IGI_Base, &ForceEDCCA, &AdapEn_RSSI, &IGI_LowerBound);
++
++		if (num != 6)
++			return count;
++
++		dm_adaptivity_set_parm(padapter, (s8)TH_L2H_ini, TH_EDCCA_HL_diff, (s8)IGI_Base, (bool)ForceEDCCA, AdapEn_RSSI, IGI_LowerBound);
++	}
++	
++	return count;
++}
++#endif /* CONFIG_DM_ADAPTIVITY */
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_eeprom.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_eeprom.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_eeprom.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_eeprom.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,423 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _RTW_EEPROM_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++
++void up_clk(_adapter*	padapter,	 u16 *x)
++{
++_func_enter_;
++	*x = *x | _EESK;
++	rtw_write8(padapter, EE_9346CR, (u8)*x);
++	rtw_udelay_os(CLOCK_RATE);
++
++_func_exit_;
++	
++}
++
++void down_clk(_adapter *	padapter, u16 *x	)
++{
++_func_enter_;
++	*x = *x & ~_EESK;
++	rtw_write8(padapter, EE_9346CR, (u8)*x);
++	rtw_udelay_os(CLOCK_RATE);
++_func_exit_;	
++}
++
++void shift_out_bits(_adapter * padapter, u16 data, u16 count)
++{
++	u16 x,mask;
++_func_enter_;
++
++	if(padapter->bSurpriseRemoved==_TRUE){
++		RT_TRACE(_module_rtl871x_eeprom_c_,_drv_err_,("padapter->bSurpriseRemoved==_TRUE"));
++		goto out;
++	}
++	mask = 0x01 << (count - 1);
++	x = rtw_read8(padapter, EE_9346CR);
++
++	x &= ~(_EEDO | _EEDI);
++
++	do
++	{
++		x &= ~_EEDI;
++		if(data & mask)
++			x |= _EEDI;
++		if(padapter->bSurpriseRemoved==_TRUE){
++		RT_TRACE(_module_rtl871x_eeprom_c_,_drv_err_,("padapter->bSurpriseRemoved==_TRUE"));
++		goto out;
++		}
++		rtw_write8(padapter, EE_9346CR, (u8)x);
++		rtw_udelay_os(CLOCK_RATE);
++		up_clk(padapter, &x);
++		down_clk(padapter, &x);
++		mask = mask >> 1;
++	} while(mask);
++	if(padapter->bSurpriseRemoved==_TRUE){
++		RT_TRACE(_module_rtl871x_eeprom_c_,_drv_err_,("padapter->bSurpriseRemoved==_TRUE"));
++		goto out;
++	}
++	x &= ~_EEDI;
++	rtw_write8(padapter, EE_9346CR, (u8)x);
++out:	
++_func_exit_;		
++}
++
++u16 shift_in_bits (_adapter * padapter)
++{
++	u16 x,d=0,i;
++_func_enter_;	
++	if(padapter->bSurpriseRemoved==_TRUE){
++		RT_TRACE(_module_rtl871x_eeprom_c_,_drv_err_,("padapter->bSurpriseRemoved==_TRUE"));
++		goto out;
++	}
++	x = rtw_read8(padapter, EE_9346CR);
++
++	x &= ~( _EEDO | _EEDI);
++	d = 0;
++
++	for(i=0; i<16; i++)
++	{
++		d = d << 1;
++		up_clk(padapter, &x);
++	if(padapter->bSurpriseRemoved==_TRUE){
++		RT_TRACE(_module_rtl871x_eeprom_c_,_drv_err_,("padapter->bSurpriseRemoved==_TRUE"));
++		goto out;
++	}
++		x = rtw_read8(padapter, EE_9346CR);
++
++		x &= ~(_EEDI);
++		if(x & _EEDO)
++		d |= 1;
++
++		down_clk(padapter, &x);
++	}
++out:	
++_func_exit_;		
++
++	return d;
++}
++
++void standby(_adapter *	padapter	)
++{
++	u8   x;
++_func_enter_;	
++	x = rtw_read8(padapter, EE_9346CR);
++
++	x &= ~(_EECS | _EESK);
++	rtw_write8(padapter, EE_9346CR,x);
++
++	rtw_udelay_os(CLOCK_RATE);
++	x |= _EECS;
++	rtw_write8(padapter, EE_9346CR, x);
++	rtw_udelay_os(CLOCK_RATE);
++_func_exit_;		
++}
++
++u16 wait_eeprom_cmd_done(_adapter* padapter)
++{
++	u8 	x;
++	u16	i,res=_FALSE;
++_func_enter_;	
++	standby(padapter );
++	for (i=0; i<200; i++) 
++	{
++		x = rtw_read8(padapter, EE_9346CR);
++		if (x & _EEDO){
++			res=_TRUE;
++			goto exit;
++			}
++		rtw_udelay_os(CLOCK_RATE);
++	}
++exit:	
++_func_exit_;			
++	return res;
++}
++
++void eeprom_clean(_adapter * padapter)
++{
++	u16 x;
++_func_enter_;		
++	if(padapter->bSurpriseRemoved==_TRUE){
++		RT_TRACE(_module_rtl871x_eeprom_c_,_drv_err_,("padapter->bSurpriseRemoved==_TRUE"));
++		goto out;
++	}
++	x = rtw_read8(padapter, EE_9346CR);
++	if(padapter->bSurpriseRemoved==_TRUE){
++		RT_TRACE(_module_rtl871x_eeprom_c_,_drv_err_,("padapter->bSurpriseRemoved==_TRUE"));
++		goto out;
++	}
++	x &= ~(_EECS | _EEDI);
++	rtw_write8(padapter, EE_9346CR, (u8)x);
++	if(padapter->bSurpriseRemoved==_TRUE){
++		RT_TRACE(_module_rtl871x_eeprom_c_,_drv_err_,("padapter->bSurpriseRemoved==_TRUE"));
++		goto out;
++	}
++	up_clk(padapter, &x);
++		if(padapter->bSurpriseRemoved==_TRUE){
++		RT_TRACE(_module_rtl871x_eeprom_c_,_drv_err_,("padapter->bSurpriseRemoved==_TRUE"));
++		goto out;
++	}
++	down_clk(padapter, &x);
++out:	
++_func_exit_;			
++}
++
++void eeprom_write16(_adapter * padapter, u16 reg, u16 data)
++{
++	u8 x;
++#ifdef CONFIG_RTL8712
++	u8	tmp8_ori,tmp8_new,tmp8_clk_ori,tmp8_clk_new;
++	tmp8_ori=rtw_read8(padapter, 0x102502f1);
++	tmp8_new=tmp8_ori & 0xf7;
++	if(tmp8_ori != tmp8_new){	
++		rtw_write8(padapter, 0x102502f1, tmp8_new);
++		RT_TRACE(_module_rtl871x_mp_ioctl_c_,_drv_err_,("====write 0x102502f1=====\n"));
++	}
++	tmp8_clk_ori=rtw_read8(padapter,0x10250003);
++	tmp8_clk_new=tmp8_clk_ori|0x20;
++	if(tmp8_clk_new!=tmp8_clk_ori){
++		RT_TRACE(_module_rtl871x_mp_ioctl_c_,_drv_err_,("====write 0x10250003=====\n"));
++		rtw_write8(padapter, 0x10250003, tmp8_clk_new);
++	}	
++#endif
++_func_enter_;		
++	
++	x = rtw_read8(padapter, EE_9346CR);
++
++	x &= ~(_EEDI | _EEDO | _EESK | _EEM0);
++	x |= _EEM1 | _EECS;
++	rtw_write8(padapter, EE_9346CR, x);
++
++	shift_out_bits(padapter, EEPROM_EWEN_OPCODE, 5);
++	
++	if(padapter->EepromAddressSize==8)	//CF+ and SDIO
++		shift_out_bits(padapter, 0, 6);
++	else									//USB
++		shift_out_bits(padapter, 0, 4);
++	
++	standby( padapter);
++
++// Commented out by rcnjko, 2004.0
++//	// Erase this particular word.  Write the erase opcode and register
++//	// number in that order. The opcode is 3bits in length; reg is 6 bits long.
++//	shift_out_bits(Adapter, EEPROM_ERASE_OPCODE, 3);
++//	shift_out_bits(Adapter, reg, Adapter->EepromAddressSize);
++//
++//	if (wait_eeprom_cmd_done(Adapter ) == FALSE) 
++//	{
++//		return;
++//	}
++
++
++	standby(padapter );
++
++	// write the new word to the EEPROM
++
++	// send the write opcode the EEPORM
++	shift_out_bits(padapter, EEPROM_WRITE_OPCODE, 3);
++
++	// select which word in the EEPROM that we are writing to.
++	shift_out_bits(padapter, reg, padapter->EepromAddressSize);
++
++	// write the data to the selected EEPROM word.
++	shift_out_bits(padapter, data, 16);
++
++	if (wait_eeprom_cmd_done(padapter ) == _FALSE) 
++	{
++
++		goto exit;
++	}
++
++	standby(padapter );
++
++	shift_out_bits(padapter, EEPROM_EWDS_OPCODE, 5);
++	shift_out_bits(padapter, reg, 4);
++
++	eeprom_clean(padapter );
++exit:	
++#ifdef CONFIG_RTL8712
++	if(tmp8_clk_new!=tmp8_clk_ori)
++		rtw_write8(padapter, 0x10250003, tmp8_clk_ori);
++	if(tmp8_new!=tmp8_ori)
++		rtw_write8(padapter, 0x102502f1, tmp8_ori);
++
++#endif
++_func_exit_;	
++	return;
++}
++
++u16 eeprom_read16(_adapter * padapter, u16 reg) //ReadEEprom
++{
++
++	u16 x;
++	u16 data=0;
++#ifdef CONFIG_RTL8712
++	u8	tmp8_ori,tmp8_new,tmp8_clk_ori,tmp8_clk_new;
++	tmp8_ori= rtw_read8(padapter, 0x102502f1);
++	tmp8_new = tmp8_ori & 0xf7;
++	if(tmp8_ori != tmp8_new){	
++		rtw_write8(padapter, 0x102502f1, tmp8_new);
++		RT_TRACE(_module_rtl871x_mp_ioctl_c_,_drv_err_,("====write 0x102502f1=====\n"));
++	}
++	tmp8_clk_ori=rtw_read8(padapter,0x10250003);
++	tmp8_clk_new=tmp8_clk_ori|0x20;
++	if(tmp8_clk_new!=tmp8_clk_ori){
++		RT_TRACE(_module_rtl871x_mp_ioctl_c_,_drv_err_,("====write 0x10250003=====\n"));
++		rtw_write8(padapter, 0x10250003, tmp8_clk_new);
++	}	
++#endif
++_func_enter_;		
++
++	if(padapter->bSurpriseRemoved==_TRUE){
++		RT_TRACE(_module_rtl871x_eeprom_c_,_drv_err_,("padapter->bSurpriseRemoved==_TRUE"));
++		goto out;
++	}
++	// select EEPROM, reset bits, set _EECS
++	x = rtw_read8(padapter, EE_9346CR);
++
++	if(padapter->bSurpriseRemoved==_TRUE){
++		RT_TRACE(_module_rtl871x_eeprom_c_,_drv_err_,("padapter->bSurpriseRemoved==_TRUE"));
++		goto out;
++	}
++
++	x &= ~(_EEDI | _EEDO | _EESK | _EEM0);
++	x |= _EEM1 | _EECS;
++	rtw_write8(padapter, EE_9346CR, (unsigned char)x);
++
++	// write the read opcode and register number in that order
++	// The opcode is 3bits in length, reg is 6 bits long
++	shift_out_bits(padapter, EEPROM_READ_OPCODE, 3);
++	shift_out_bits(padapter, reg, padapter->EepromAddressSize);
++
++	// Now read the data (16 bits) in from the selected EEPROM word
++	data = shift_in_bits(padapter);
++
++	eeprom_clean(padapter);
++out:	
++#ifdef CONFIG_RTL8712
++	if(tmp8_clk_new!=tmp8_clk_ori)
++		rtw_write8(padapter, 0x10250003, tmp8_clk_ori);
++	if(tmp8_new!=tmp8_ori)
++		rtw_write8(padapter, 0x102502f1, tmp8_ori);
++
++#endif
++_func_exit_;		
++	return data;
++
++
++}
++
++
++
++
++//From even offset
++void eeprom_read_sz(_adapter * padapter, u16 reg, u8* data, u32 sz) 
++{
++
++	u16 x, data16;
++	u32 i;
++_func_enter_;		
++	if(padapter->bSurpriseRemoved==_TRUE){
++		RT_TRACE(_module_rtl871x_eeprom_c_,_drv_err_,("padapter->bSurpriseRemoved==_TRUE"));
++		goto out;
++	}
++	// select EEPROM, reset bits, set _EECS
++	x = rtw_read8(padapter, EE_9346CR);
++
++	if(padapter->bSurpriseRemoved==_TRUE){
++		RT_TRACE(_module_rtl871x_eeprom_c_,_drv_err_,("padapter->bSurpriseRemoved==_TRUE"));
++		goto out;
++	}
++
++	x &= ~(_EEDI | _EEDO | _EESK | _EEM0);
++	x |= _EEM1 | _EECS;
++	rtw_write8(padapter, EE_9346CR, (unsigned char)x);
++
++	// write the read opcode and register number in that order
++	// The opcode is 3bits in length, reg is 6 bits long
++	shift_out_bits(padapter, EEPROM_READ_OPCODE, 3);
++	shift_out_bits(padapter, reg, padapter->EepromAddressSize);
++
++
++	for(i=0; i<sz; i+=2)
++	{
++		data16 = shift_in_bits(padapter);
++		data[i] = data16 & 0xff;
++		data[i+1] = data16 >>8;		
++	}
++
++	eeprom_clean(padapter);
++out:	
++_func_exit_;		
++
++
++
++}
++
++
++//addr_off : address offset of the entry in eeprom (not the tuple number of eeprom (reg); that is addr_off !=reg)
++u8 eeprom_read(_adapter * padapter, u32 addr_off, u8 sz, u8* rbuf)
++{
++	u8 quotient, remainder, addr_2align_odd;
++	u16 reg, stmp , i=0, idx = 0;
++_func_enter_;		
++	reg = (u16)(addr_off >> 1);
++	addr_2align_odd = (u8)(addr_off & 0x1);
++
++	if(addr_2align_odd) //read that start at high part: e.g  1,3,5,7,9,...
++	{
++		stmp = eeprom_read16(padapter, reg);
++		rbuf[idx++] = (u8) ((stmp>>8)&0xff); //return hogh-part of the short
++		reg++; sz--;
++	}
++	
++	quotient = sz >> 1;
++	remainder = sz & 0x1;
++
++	for( i=0 ; i < quotient; i++)
++	{
++		stmp = eeprom_read16(padapter, reg+i);
++		rbuf[idx++] = (u8) (stmp&0xff);
++		rbuf[idx++] = (u8) ((stmp>>8)&0xff);
++	}
++	
++	reg = reg+i;
++	if(remainder){ //end of read at lower part of short : 0,2,4,6,...
++		stmp = eeprom_read16(padapter, reg);
++		rbuf[idx] = (u8)(stmp & 0xff); 
++	}
++_func_exit_;		
++	return _TRUE;
++}
++
++
++
++VOID read_eeprom_content(_adapter *	padapter)
++{
++
++_func_enter_;		
++
++
++_func_exit_;		
++}
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_ieee80211.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_ieee80211.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_ieee80211.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_ieee80211.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,1915 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _IEEE80211_C
++
++#include <drv_types.h>
++#include <ieee80211.h>
++#include <wifi.h>
++#include <osdep_service.h>
++#include <wlan_bssdef.h>
++
++u8 RTW_WPA_OUI_TYPE[] = { 0x00, 0x50, 0xf2, 1 };
++u16 RTW_WPA_VERSION = 1;
++u8 WPA_AUTH_KEY_MGMT_NONE[] = { 0x00, 0x50, 0xf2, 0 };
++u8 WPA_AUTH_KEY_MGMT_UNSPEC_802_1X[] = { 0x00, 0x50, 0xf2, 1 };
++u8 WPA_AUTH_KEY_MGMT_PSK_OVER_802_1X[] = { 0x00, 0x50, 0xf2, 2 };
++u8 WPA_CIPHER_SUITE_NONE[] = { 0x00, 0x50, 0xf2, 0 };
++u8 WPA_CIPHER_SUITE_WEP40[] = { 0x00, 0x50, 0xf2, 1 };
++u8 WPA_CIPHER_SUITE_TKIP[] = { 0x00, 0x50, 0xf2, 2 };
++u8 WPA_CIPHER_SUITE_WRAP[] = { 0x00, 0x50, 0xf2, 3 };
++u8 WPA_CIPHER_SUITE_CCMP[] = { 0x00, 0x50, 0xf2, 4 };
++u8 WPA_CIPHER_SUITE_WEP104[] = { 0x00, 0x50, 0xf2, 5 };
++
++u16 RSN_VERSION_BSD = 1;
++u8 RSN_AUTH_KEY_MGMT_UNSPEC_802_1X[] = { 0x00, 0x0f, 0xac, 1 };
++u8 RSN_AUTH_KEY_MGMT_PSK_OVER_802_1X[] = { 0x00, 0x0f, 0xac, 2 };
++u8 RSN_CIPHER_SUITE_NONE[] = { 0x00, 0x0f, 0xac, 0 };
++u8 RSN_CIPHER_SUITE_WEP40[] = { 0x00, 0x0f, 0xac, 1 };
++u8 RSN_CIPHER_SUITE_TKIP[] = { 0x00, 0x0f, 0xac, 2 };
++u8 RSN_CIPHER_SUITE_WRAP[] = { 0x00, 0x0f, 0xac, 3 };
++u8 RSN_CIPHER_SUITE_CCMP[] = { 0x00, 0x0f, 0xac, 4 };
++u8 RSN_CIPHER_SUITE_WEP104[] = { 0x00, 0x0f, 0xac, 5 };
++//-----------------------------------------------------------
++// for adhoc-master to generate ie and provide supported-rate to fw 
++//-----------------------------------------------------------
++
++static u8 	WIFI_CCKRATES[] = 
++{(IEEE80211_CCK_RATE_1MB | IEEE80211_BASIC_RATE_MASK),
++ (IEEE80211_CCK_RATE_2MB | IEEE80211_BASIC_RATE_MASK),
++ (IEEE80211_CCK_RATE_5MB | IEEE80211_BASIC_RATE_MASK),
++ (IEEE80211_CCK_RATE_11MB | IEEE80211_BASIC_RATE_MASK)};
++
++static u8 	WIFI_OFDMRATES[] = 
++{(IEEE80211_OFDM_RATE_6MB),
++ (IEEE80211_OFDM_RATE_9MB),
++ (IEEE80211_OFDM_RATE_12MB),
++ (IEEE80211_OFDM_RATE_18MB),
++ (IEEE80211_OFDM_RATE_24MB),
++ IEEE80211_OFDM_RATE_36MB,
++ IEEE80211_OFDM_RATE_48MB,
++ IEEE80211_OFDM_RATE_54MB};
++
++
++int rtw_get_bit_value_from_ieee_value(u8 val)
++{
++	unsigned char dot11_rate_table[]={2,4,11,22,12,18,24,36,48,72,96,108,0}; // last element must be zero!!
++
++	int i=0;
++	while(dot11_rate_table[i] != 0) {
++		if (dot11_rate_table[i] == val)
++			return BIT(i);
++		i++;
++	}
++	return 0;
++}
++
++uint	rtw_is_cckrates_included(u8 *rate)
++{	
++		u32	i = 0;			
++
++		while(rate[i]!=0)
++		{		
++			if  (  (((rate[i]) & 0x7f) == 2)	|| (((rate[i]) & 0x7f) == 4) ||		
++			(((rate[i]) & 0x7f) == 11)  || (((rate[i]) & 0x7f) == 22) )		
++			return _TRUE;	
++			i++;
++		}
++		
++		return _FALSE;
++}
++
++uint	rtw_is_cckratesonly_included(u8 *rate)
++{
++	u32 i = 0;
++
++
++	while(rate[i]!=0)
++	{
++			if  (  (((rate[i]) & 0x7f) != 2) && (((rate[i]) & 0x7f) != 4) &&
++				(((rate[i]) & 0x7f) != 11)  && (((rate[i]) & 0x7f) != 22) )
++
++			return _FALSE;		
++
++			i++;
++	}
++	
++	return _TRUE;
++
++}
++
++int rtw_check_network_type(unsigned char *rate, int ratelen, int channel)
++{
++	if (channel > 14)
++	{
++		if ((rtw_is_cckrates_included(rate)) == _TRUE)
++			return WIRELESS_INVALID;
++		else
++			return WIRELESS_11A;
++	}	
++	else  // could be pure B, pure G, or B/G
++	{
++		if ((rtw_is_cckratesonly_included(rate)) == _TRUE)	
++			return WIRELESS_11B;
++		else if((rtw_is_cckrates_included(rate)) == _TRUE)
++			return 	WIRELESS_11BG;
++		else
++			return WIRELESS_11G;
++	}
++	
++}
++
++u8 *rtw_set_fixed_ie(unsigned char *pbuf, unsigned int len, unsigned char *source,
++				unsigned int *frlen)
++{
++	_rtw_memcpy((void *)pbuf, (void *)source, len);
++	*frlen = *frlen + len;
++	return (pbuf + len);
++}
++
++// rtw_set_ie will update frame length
++u8 *rtw_set_ie
++(
++	u8 *pbuf, 
++	sint index, 
++	uint len,
++	u8 *source, 
++	uint *frlen //frame length
++)
++{
++_func_enter_;
++	*pbuf = (u8)index;
++
++	*(pbuf + 1) = (u8)len;
++
++	if (len > 0)
++		_rtw_memcpy((void *)(pbuf + 2), (void *)source, len);
++	
++	*frlen = *frlen + (len + 2);
++	
++	return (pbuf + len + 2);
++_func_exit_;	
++}
++
++inline u8 *rtw_set_ie_ch_switch(u8 *buf, u32 *buf_len, u8 ch_switch_mode,
++	u8 new_ch, u8 ch_switch_cnt)
++{
++	u8 ie_data[3];
++
++	ie_data[0] = ch_switch_mode;
++	ie_data[1] = new_ch;
++	ie_data[2] = ch_switch_cnt;
++	return rtw_set_ie(buf, WLAN_EID_CHANNEL_SWITCH,  3, ie_data, buf_len);
++}
++
++inline u8 secondary_ch_offset_to_hal_ch_offset(u8 ch_offset)
++{
++	if (ch_offset == SCN)
++		return HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++	else if(ch_offset == SCA)
++		return HAL_PRIME_CHNL_OFFSET_UPPER;
++	else if(ch_offset == SCB)
++		return HAL_PRIME_CHNL_OFFSET_LOWER;
++
++	return HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++}
++
++inline u8 hal_ch_offset_to_secondary_ch_offset(u8 ch_offset)
++{
++	if (ch_offset == HAL_PRIME_CHNL_OFFSET_DONT_CARE)
++		return SCN;
++	else if(ch_offset == HAL_PRIME_CHNL_OFFSET_LOWER)
++		return SCB;
++	else if(ch_offset == HAL_PRIME_CHNL_OFFSET_UPPER)
++		return SCA;
++
++	return SCN;
++}
++
++inline u8 *rtw_set_ie_secondary_ch_offset(u8 *buf, u32 *buf_len, u8 secondary_ch_offset)
++{
++	return rtw_set_ie(buf, WLAN_EID_SECONDARY_CHANNEL_OFFSET,  1, &secondary_ch_offset, buf_len);
++}
++
++inline u8 *rtw_set_ie_mesh_ch_switch_parm(u8 *buf, u32 *buf_len, u8 ttl,
++	u8 flags, u16 reason, u16 precedence)
++{
++	u8 ie_data[6];
++
++	ie_data[0] = ttl;
++	ie_data[1] = flags;
++	RTW_PUT_LE16((u8*)&ie_data[2], reason);
++	RTW_PUT_LE16((u8*)&ie_data[4], precedence);
++
++	return rtw_set_ie(buf, 0x118,  6, ie_data, buf_len);
++}
++
++/*----------------------------------------------------------------------------
++index: the information element id index, limit is the limit for search
++-----------------------------------------------------------------------------*/
++u8 *rtw_get_ie(u8 *pbuf, sint index, sint *len, sint limit)
++{
++	sint tmp,i;
++	u8 *p;
++_func_enter_;
++	if (limit < 1){
++		_func_exit_;	
++		return NULL;
++	}
++
++	p = pbuf;
++	i = 0;
++	*len = 0;
++	while(1)
++	{
++		if (*p == index)
++		{
++			*len = *(p + 1);
++			return (p);
++		}
++		else
++		{
++			tmp = *(p + 1);
++			p += (tmp + 2);
++			i += (tmp + 2);
++		}
++		if (i >= limit)
++			break;
++	}
++_func_exit_;		
++	return NULL;
++}
++
++/**
++ * rtw_get_ie_ex - Search specific IE from a series of IEs
++ * @in_ie: Address of IEs to search
++ * @in_len: Length limit from in_ie
++ * @eid: Element ID to match
++ * @oui: OUI to match
++ * @oui_len: OUI length
++ * @ie: If not NULL and the specific IE is found, the IE will be copied to the buf starting from the specific IE
++ * @ielen: If not NULL and the specific IE is found, will set to the length of the entire IE
++ *
++ * Returns: The address of the specific IE found, or NULL
++ */
++u8 *rtw_get_ie_ex(u8 *in_ie, uint in_len, u8 eid, u8 *oui, u8 oui_len, u8 *ie, uint *ielen)
++{
++	uint cnt;
++	u8 *target_ie = NULL;
++
++
++	if(ielen)
++		*ielen = 0;
++
++	if(!in_ie || in_len<=0)
++		return target_ie;
++
++	cnt = 0;
++
++	while(cnt<in_len)
++	{
++		if(eid == in_ie[cnt]
++			&& ( !oui || _rtw_memcmp(&in_ie[cnt+2], oui, oui_len) == _TRUE))
++		{
++			target_ie = &in_ie[cnt];
++
++			if(ie)
++				_rtw_memcpy(ie, &in_ie[cnt], in_ie[cnt+1]+2);
++			
++			if(ielen)
++				*ielen = in_ie[cnt+1]+2;
++
++			break;
++		}
++		else
++		{
++			cnt+=in_ie[cnt+1]+2; //goto next	
++		}		
++
++	}	
++
++	return target_ie;
++}
++
++/**
++ * rtw_ies_remove_ie - Find matching IEs and remove
++ * @ies: Address of IEs to search
++ * @ies_len: Pointer of length of ies, will update to new length
++ * @offset: The offset to start scarch
++ * @eid: Element ID to match
++ * @oui: OUI to match
++ * @oui_len: OUI length
++ *
++ * Returns: _SUCCESS: ies is updated, _FAIL: not updated
++ */
++int rtw_ies_remove_ie(u8 *ies, uint *ies_len, uint offset, u8 eid, u8 *oui, u8 oui_len)
++{
++	int ret = _FAIL;
++	u8 *target_ie;
++	u32 target_ielen;
++	u8 *start;
++	uint search_len;
++	
++	if(!ies || !ies_len || *ies_len <= offset)
++		goto exit;
++
++	start = ies + offset;
++	search_len = *ies_len - offset;
++
++	while (1) {
++		target_ie = rtw_get_ie_ex(start, search_len, eid, oui, oui_len, NULL, &target_ielen);
++		if (target_ie && target_ielen) {
++			u8 buf[MAX_IE_SZ] = {0};
++			u8 *remain_ies = target_ie + target_ielen;
++			uint remain_len = search_len - (remain_ies - start);
++			
++			_rtw_memcpy(buf, remain_ies, remain_len);
++			_rtw_memcpy(target_ie, buf, remain_len);
++			*ies_len = *ies_len - target_ielen;
++			ret = _SUCCESS;
++
++			start = target_ie;
++			search_len = remain_len;
++		} else {
++			break;
++		}
++	}
++exit:
++	return ret;
++}
++
++void rtw_set_supported_rate(u8* SupportedRates, uint mode) 
++{
++_func_enter_;
++
++	_rtw_memset(SupportedRates, 0, NDIS_802_11_LENGTH_RATES_EX);
++	
++	switch (mode)
++	{
++		case WIRELESS_11B:
++			_rtw_memcpy(SupportedRates, WIFI_CCKRATES, IEEE80211_CCK_RATE_LEN);
++			break;
++		
++		case WIRELESS_11G:
++		case WIRELESS_11A:
++		case WIRELESS_11_5N:
++		case WIRELESS_11A_5N://Todo: no basic rate for ofdm ?
++			_rtw_memcpy(SupportedRates, WIFI_OFDMRATES, IEEE80211_NUM_OFDM_RATESLEN);
++			break;
++		
++		case WIRELESS_11BG:
++		case WIRELESS_11G_24N:
++		case WIRELESS_11_24N:
++		case WIRELESS_11BG_24N:
++			_rtw_memcpy(SupportedRates, WIFI_CCKRATES, IEEE80211_CCK_RATE_LEN);
++			_rtw_memcpy(SupportedRates + IEEE80211_CCK_RATE_LEN, WIFI_OFDMRATES, IEEE80211_NUM_OFDM_RATESLEN);
++			break;
++	
++	}
++_func_exit_;	
++}
++
++uint	rtw_get_rateset_len(u8	*rateset)
++{
++	uint i = 0;
++_func_enter_;	
++	while(1)
++	{
++		if ((rateset[i]) == 0)
++			break;
++			
++		if (i > 12)
++			break;
++			
++		i++;			
++	}
++_func_exit_;		
++	return i;
++}
++
++int rtw_generate_ie(struct registry_priv *pregistrypriv)
++{
++	u8	wireless_mode;
++	int 	sz = 0, rateLen;
++	WLAN_BSSID_EX*	pdev_network = &pregistrypriv->dev_network;
++	u8*	ie = pdev_network->IEs;
++	
++_func_enter_;		
++
++	//timestamp will be inserted by hardware
++	sz += 8;	
++	ie += sz;
++	
++	//beacon interval : 2bytes
++	*(u16*)ie = cpu_to_le16((u16)pdev_network->Configuration.BeaconPeriod);//BCN_INTERVAL;
++	sz += 2; 
++	ie += 2;
++	
++	//capability info
++	*(u16*)ie = 0;
++	
++	*(u16*)ie |= cpu_to_le16(cap_IBSS);
++
++	if(pregistrypriv->preamble == PREAMBLE_SHORT)
++		*(u16*)ie |= cpu_to_le16(cap_ShortPremble);
++	
++	if (pdev_network->Privacy)
++		*(u16*)ie |= cpu_to_le16(cap_Privacy);
++	
++	sz += 2;
++	ie += 2;
++	
++	//SSID
++	ie = rtw_set_ie(ie, _SSID_IE_, pdev_network->Ssid.SsidLength, pdev_network->Ssid.Ssid, &sz);
++	
++	//supported rates
++	if(pregistrypriv->wireless_mode == WIRELESS_11ABGN)
++	{
++		if(pdev_network->Configuration.DSConfig > 14)
++			wireless_mode = WIRELESS_11A_5N;
++		else
++			wireless_mode = WIRELESS_11BG_24N;
++	}
++	else
++	{
++		wireless_mode = pregistrypriv->wireless_mode;
++	}
++	
++	rtw_set_supported_rate(pdev_network->SupportedRates, wireless_mode) ;
++	
++	rateLen = rtw_get_rateset_len(pdev_network->SupportedRates);
++
++	if (rateLen > 8)
++	{
++		ie = rtw_set_ie(ie, _SUPPORTEDRATES_IE_, 8, pdev_network->SupportedRates, &sz);
++		//ie = rtw_set_ie(ie, _EXT_SUPPORTEDRATES_IE_, (rateLen - 8), (pdev_network->SupportedRates + 8), &sz);
++	}
++	else
++	{
++		ie = rtw_set_ie(ie, _SUPPORTEDRATES_IE_, rateLen, pdev_network->SupportedRates, &sz);
++	}
++
++	//DS parameter set
++	ie = rtw_set_ie(ie, _DSSET_IE_, 1, (u8 *)&(pdev_network->Configuration.DSConfig), &sz);
++
++
++	//IBSS Parameter Set
++	
++	ie = rtw_set_ie(ie, _IBSS_PARA_IE_, 2, (u8 *)&(pdev_network->Configuration.ATIMWindow), &sz);
++
++	if (rateLen > 8)
++	{		
++		ie = rtw_set_ie(ie, _EXT_SUPPORTEDRATES_IE_, (rateLen - 8), (pdev_network->SupportedRates + 8), &sz);
++	}
++	
++		
++	//HT Cap.
++	if(((pregistrypriv->wireless_mode&WIRELESS_11_5N)||(pregistrypriv->wireless_mode&WIRELESS_11_24N)) 
++		&& (pregistrypriv->ht_enable==_TRUE))
++	{
++		//todo:
++	}
++
++	//pdev_network->IELength =  sz; //update IELength
++
++_func_exit_;
++
++	//return _SUCCESS;
++
++	return sz;
++
++}
++
++unsigned char *rtw_get_wpa_ie(unsigned char *pie, int *wpa_ie_len, int limit)
++{
++	int len;
++	u16 val16;
++	unsigned char wpa_oui_type[] = {0x00, 0x50, 0xf2, 0x01};
++	u8 *pbuf = pie;
++
++	while(1) 
++	{
++		pbuf = rtw_get_ie(pbuf, _WPA_IE_ID_, &len, limit);
++
++		if (pbuf) {
++
++			//check if oui matches...
++			if (_rtw_memcmp((pbuf + 2), wpa_oui_type, sizeof (wpa_oui_type)) == _FALSE) {
++
++				goto check_next_ie;
++			}
++
++			//check version...
++			_rtw_memcpy((u8 *)&val16, (pbuf + 6), sizeof(val16));
++
++			val16 = le16_to_cpu(val16);
++			if (val16 != 0x0001)
++				goto check_next_ie;
++
++			*wpa_ie_len = *(pbuf + 1);
++
++			return pbuf;
++		}
++		else {
++
++			*wpa_ie_len = 0;
++			return NULL;
++		}
++
++check_next_ie:
++
++		limit -= (2 + len);
++
++		if (limit <= 0)
++			break;
++
++		pbuf += (2 + len);
++	}
++
++	*wpa_ie_len = 0;
++
++	return NULL;
++}
++
++unsigned char *rtw_get_wpa2_ie(unsigned char *pie, int *rsn_ie_len, int limit)
++{	
++
++	return rtw_get_ie(pie, _WPA2_IE_ID_,rsn_ie_len, limit);
++
++}
++
++int rtw_get_wpa_cipher_suite(u8 *s)
++{
++	if (_rtw_memcmp(s, WPA_CIPHER_SUITE_NONE, WPA_SELECTOR_LEN) == _TRUE)
++		return WPA_CIPHER_NONE;
++	if (_rtw_memcmp(s, WPA_CIPHER_SUITE_WEP40, WPA_SELECTOR_LEN) == _TRUE)
++		return WPA_CIPHER_WEP40;
++	if (_rtw_memcmp(s, WPA_CIPHER_SUITE_TKIP, WPA_SELECTOR_LEN) == _TRUE)
++		return WPA_CIPHER_TKIP;
++	if (_rtw_memcmp(s, WPA_CIPHER_SUITE_CCMP, WPA_SELECTOR_LEN) == _TRUE)
++		return WPA_CIPHER_CCMP;
++	if (_rtw_memcmp(s, WPA_CIPHER_SUITE_WEP104, WPA_SELECTOR_LEN) == _TRUE)
++		return WPA_CIPHER_WEP104;
++
++	return 0;
++}
++
++int rtw_get_wpa2_cipher_suite(u8 *s)
++{
++	if (_rtw_memcmp(s, RSN_CIPHER_SUITE_NONE, RSN_SELECTOR_LEN) == _TRUE)
++		return WPA_CIPHER_NONE;
++	if (_rtw_memcmp(s, RSN_CIPHER_SUITE_WEP40, RSN_SELECTOR_LEN) == _TRUE)
++		return WPA_CIPHER_WEP40;
++	if (_rtw_memcmp(s, RSN_CIPHER_SUITE_TKIP, RSN_SELECTOR_LEN) == _TRUE)
++		return WPA_CIPHER_TKIP;
++	if (_rtw_memcmp(s, RSN_CIPHER_SUITE_CCMP, RSN_SELECTOR_LEN) == _TRUE)
++		return WPA_CIPHER_CCMP;
++	if (_rtw_memcmp(s, RSN_CIPHER_SUITE_WEP104, RSN_SELECTOR_LEN) == _TRUE)
++		return WPA_CIPHER_WEP104;
++
++	return 0;
++}
++
++
++int rtw_parse_wpa_ie(u8* wpa_ie, int wpa_ie_len, int *group_cipher, int *pairwise_cipher)
++{
++	int i, ret=_SUCCESS;
++	int left, count;
++	u8 *pos;
++
++	if (wpa_ie_len <= 0) {
++		/* No WPA IE - fail silently */
++		return _FAIL;
++	}
++
++	
++	if ((*wpa_ie != _WPA_IE_ID_) || (*(wpa_ie+1) != (u8)(wpa_ie_len - 2)) ||
++	   (_rtw_memcmp(wpa_ie+2, RTW_WPA_OUI_TYPE, WPA_SELECTOR_LEN) != _TRUE) )
++	{		
++		return _FAIL;
++	}
++
++	pos = wpa_ie;
++
++	pos += 8;
++	left = wpa_ie_len - 8;	
++
++
++	//group_cipher
++	if (left >= WPA_SELECTOR_LEN) {
++
++		*group_cipher = rtw_get_wpa_cipher_suite(pos);
++		
++		pos += WPA_SELECTOR_LEN;
++		left -= WPA_SELECTOR_LEN;
++		
++	} 
++	else if (left > 0)
++	{
++		RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("%s: ie length mismatch, %u too much", __FUNCTION__, left));
++		
++		return _FAIL;
++	}
++
++
++	//pairwise_cipher
++	if (left >= 2)
++	{		
++                //count = le16_to_cpu(*(u16*)pos);	
++		count = RTW_GET_LE16(pos);
++		pos += 2;
++		left -= 2;
++		
++		if (count == 0 || left < count * WPA_SELECTOR_LEN) {
++			RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("%s: ie count botch (pairwise), "
++				   		"count %u left %u", __FUNCTION__, count, left));
++			return _FAIL;
++		}
++		
++		for (i = 0; i < count; i++)
++		{
++			*pairwise_cipher |= rtw_get_wpa_cipher_suite(pos);
++			
++			pos += WPA_SELECTOR_LEN;
++			left -= WPA_SELECTOR_LEN;
++		}
++		
++	} 
++	else if (left == 1)
++	{
++		RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("%s: ie too short (for key mgmt)",   __FUNCTION__));
++		return _FAIL;
++	}
++
++	
++	return ret;
++	
++}
++
++int rtw_parse_wpa2_ie(u8* rsn_ie, int rsn_ie_len, int *group_cipher, int *pairwise_cipher)
++{
++	int i, ret=_SUCCESS;
++	int left, count;
++	u8 *pos;
++
++	if (rsn_ie_len <= 0) {
++		/* No RSN IE - fail silently */
++		return _FAIL;
++	}
++
++
++	if ((*rsn_ie!= _WPA2_IE_ID_) || (*(rsn_ie+1) != (u8)(rsn_ie_len - 2)))
++	{		
++		return _FAIL;
++	}
++	
++	pos = rsn_ie;
++	pos += 4;
++	left = rsn_ie_len - 4;	
++
++	//group_cipher
++	if (left >= RSN_SELECTOR_LEN) {
++
++		*group_cipher = rtw_get_wpa2_cipher_suite(pos);
++		
++		pos += RSN_SELECTOR_LEN;
++		left -= RSN_SELECTOR_LEN;
++		
++	} else if (left > 0) {
++		RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("%s: ie length mismatch, %u too much", __FUNCTION__, left));
++		return _FAIL;
++	}
++
++	//pairwise_cipher
++	if (left >= 2)
++	{		
++	        //count = le16_to_cpu(*(u16*)pos);
++		count = RTW_GET_LE16(pos);
++		pos += 2;
++		left -= 2;
++
++		if (count == 0 || left < count * RSN_SELECTOR_LEN) {
++			RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("%s: ie count botch (pairwise), "
++				  		 "count %u left %u", __FUNCTION__, count, left));
++			return _FAIL;
++		}
++		
++		for (i = 0; i < count; i++)
++		{			
++			*pairwise_cipher |= rtw_get_wpa2_cipher_suite(pos);
++			
++			pos += RSN_SELECTOR_LEN;
++			left -= RSN_SELECTOR_LEN;
++		}
++
++	} 
++	else if (left == 1)
++	{
++		RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("%s: ie too short (for key mgmt)",  __FUNCTION__));
++		
++		return _FAIL;
++	}
++
++
++	return ret;
++	
++}
++
++int rtw_get_sec_ie(u8 *in_ie,uint in_len,u8 *rsn_ie,u16 *rsn_len,u8 *wpa_ie,u16 *wpa_len)
++{
++	u8 authmode, sec_idx, i;
++	u8 wpa_oui[4]={0x0,0x50,0xf2,0x01};
++	uint 	cnt;
++	
++_func_enter_;
++
++	//Search required WPA or WPA2 IE and copy to sec_ie[ ]
++	
++	cnt = (_TIMESTAMP_ + _BEACON_ITERVAL_ + _CAPABILITY_);
++	
++	sec_idx=0;
++		
++	while(cnt<in_len)
++	{
++		authmode=in_ie[cnt];
++		
++		if((authmode==_WPA_IE_ID_)&&(_rtw_memcmp(&in_ie[cnt+2], &wpa_oui[0],4)==_TRUE))
++		{	
++				RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("\n rtw_get_wpa_ie: sec_idx=%d in_ie[cnt+1]+2=%d\n",sec_idx,in_ie[cnt+1]+2));		
++
++				_rtw_memcpy(wpa_ie, &in_ie[cnt],in_ie[cnt+1]+2);
++
++				for(i=0;i<(in_ie[cnt+1]+2);i=i+8){
++					RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("\n %2x,%2x,%2x,%2x,%2x,%2x,%2x,%2x\n",wpa_ie[i],wpa_ie[i+1],wpa_ie[i+2],wpa_ie[i+3],wpa_ie[i+4],wpa_ie[i+5],wpa_ie[i+6],wpa_ie[i+7]));
++				}
++
++				*wpa_len=in_ie[cnt+1]+2;
++				cnt+=in_ie[cnt+1]+2;  //get next
++		}
++		else
++		{
++			if(authmode==_WPA2_IE_ID_)
++			{
++				RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("\n get_rsn_ie: sec_idx=%d in_ie[cnt+1]+2=%d\n",sec_idx,in_ie[cnt+1]+2));		
++
++				_rtw_memcpy(rsn_ie, &in_ie[cnt],in_ie[cnt+1]+2);
++
++				for(i=0;i<(in_ie[cnt+1]+2);i=i+8){
++					RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("\n %2x,%2x,%2x,%2x,%2x,%2x,%2x,%2x\n",rsn_ie[i],rsn_ie[i+1],rsn_ie[i+2],rsn_ie[i+3],rsn_ie[i+4],rsn_ie[i+5],rsn_ie[i+6],rsn_ie[i+7]));
++				}
++
++				*rsn_len=in_ie[cnt+1]+2;
++				cnt+=in_ie[cnt+1]+2;  //get next
++			}
++			else
++			{
++				cnt+=in_ie[cnt+1]+2;   //get next
++			}	
++		}
++		
++	}
++	
++_func_exit_;
++
++	return (*rsn_len+*wpa_len);
++	
++}
++
++u8 rtw_is_wps_ie(u8 *ie_ptr, uint *wps_ielen)
++{	
++	u8 match = _FALSE;
++	u8 eid, wps_oui[4]={0x0,0x50,0xf2,0x04};
++	
++	if(ie_ptr == NULL) return match;
++	
++	eid = ie_ptr[0];
++	
++	if((eid==_WPA_IE_ID_)&&(_rtw_memcmp(&ie_ptr[2], wps_oui, 4)==_TRUE))
++	{			
++		//printk("==> found WPS_IE.....\n");		
++		*wps_ielen = ie_ptr[1]+2;			
++		match=_TRUE;
++	}	
++	return match;
++}
++
++/**
++ * rtw_get_wps_ie - Search WPS IE from a series of IEs
++ * @in_ie: Address of IEs to search
++ * @in_len: Length limit from in_ie
++ * @wps_ie: If not NULL and WPS IE is found, WPS IE will be copied to the buf starting from wps_ie
++ * @wps_ielen: If not NULL and WPS IE is found, will set to the length of the entire WPS IE
++ *
++ * Returns: The address of the WPS IE found, or NULL
++ */
++u8 *rtw_get_wps_ie(u8 *in_ie, uint in_len, u8 *wps_ie, uint *wps_ielen)
++{
++	uint cnt;
++	u8 *wpsie_ptr=NULL;
++	u8 eid, wps_oui[4]={0x0,0x50,0xf2,0x04};
++
++	if(wps_ielen)
++		*wps_ielen = 0;
++
++	if(!in_ie || in_len<=0)
++		return wpsie_ptr;
++
++	cnt = 0;
++
++	while(cnt<in_len)
++	{
++		eid = in_ie[cnt];
++
++		if((eid==_WPA_IE_ID_)&&(_rtw_memcmp(&in_ie[cnt+2], wps_oui, 4)==_TRUE))
++		{
++			wpsie_ptr = &in_ie[cnt];
++
++			if(wps_ie)
++				_rtw_memcpy(wps_ie, &in_ie[cnt], in_ie[cnt+1]+2);
++			
++			if(wps_ielen)
++				*wps_ielen = in_ie[cnt+1]+2;
++			
++			cnt+=in_ie[cnt+1]+2;
++
++			break;
++		}
++		else
++		{
++			cnt+=in_ie[cnt+1]+2; //goto next	
++		}		
++
++	}	
++
++	return wpsie_ptr;
++}
++
++/**
++ * rtw_get_wps_attr - Search a specific WPS attribute from a given WPS IE
++ * @wps_ie: Address of WPS IE to search
++ * @wps_ielen: Length limit from wps_ie
++ * @target_attr_id: The attribute ID of WPS attribute to search
++ * @buf_attr: If not NULL and the WPS attribute is found, WPS attribute will be copied to the buf starting from buf_attr
++ * @len_attr: If not NULL and the WPS attribute is found, will set to the length of the entire WPS attribute
++ *
++ * Returns: the address of the specific WPS attribute found, or NULL
++ */
++u8 *rtw_get_wps_attr(u8 *wps_ie, uint wps_ielen, u16 target_attr_id ,u8 *buf_attr, u32 *len_attr)
++{
++	u8 *attr_ptr = NULL;
++	u8 * target_attr_ptr = NULL;
++	u8 wps_oui[4]={0x00,0x50,0xF2,0x04};
++
++	if(len_attr)
++		*len_attr = 0;
++
++	if ( ( wps_ie[0] != _VENDOR_SPECIFIC_IE_ ) ||
++		( _rtw_memcmp( wps_ie + 2, wps_oui , 4 ) != _TRUE ) )
++	{
++		return attr_ptr;
++	}
++
++	// 6 = 1(Element ID) + 1(Length) + 4(WPS OUI)
++	attr_ptr = wps_ie + 6; //goto first attr
++	
++	while(attr_ptr - wps_ie < wps_ielen)
++	{
++		// 4 = 2(Attribute ID) + 2(Length)
++		u16 attr_id = RTW_GET_BE16(attr_ptr);
++		u16 attr_data_len = RTW_GET_BE16(attr_ptr + 2);
++		u16 attr_len = attr_data_len + 4;
++		
++		//DBG_871X("%s attr_ptr:%p, id:%u, length:%u\n", __FUNCTION__, attr_ptr, attr_id, attr_data_len);
++		if( attr_id == target_attr_id )
++		{
++			target_attr_ptr = attr_ptr;
++		
++			if(buf_attr)
++				_rtw_memcpy(buf_attr, attr_ptr, attr_len);
++			
++			if(len_attr)
++				*len_attr = attr_len;
++			
++			break;
++		}
++		else
++		{
++			attr_ptr += attr_len; //goto next
++		}		
++		
++	}	
++
++	return target_attr_ptr;
++}
++
++/**
++ * rtw_get_wps_attr_content - Search a specific WPS attribute content from a given WPS IE
++ * @wps_ie: Address of WPS IE to search
++ * @wps_ielen: Length limit from wps_ie
++ * @target_attr_id: The attribute ID of WPS attribute to search
++ * @buf_content: If not NULL and the WPS attribute is found, WPS attribute content will be copied to the buf starting from buf_content
++ * @len_content: If not NULL and the WPS attribute is found, will set to the length of the WPS attribute content
++ *
++ * Returns: the address of the specific WPS attribute content found, or NULL
++ */
++u8 *rtw_get_wps_attr_content(u8 *wps_ie, uint wps_ielen, u16 target_attr_id ,u8 *buf_content, uint *len_content)
++{
++	u8 *attr_ptr;
++	u32 attr_len;
++
++	if(len_content)
++		*len_content = 0;
++	
++	attr_ptr = rtw_get_wps_attr(wps_ie, wps_ielen, target_attr_id, NULL, &attr_len);
++
++	if(attr_ptr && attr_len)
++	{
++		if(buf_content)
++			_rtw_memcpy(buf_content, attr_ptr+4, attr_len-4);
++
++		if(len_content)
++			*len_content = attr_len-4;
++
++		return attr_ptr+4;
++	}
++
++	return NULL;
++}
++
++static int rtw_ieee802_11_parse_vendor_specific(u8 *pos, uint elen,
++					    struct rtw_ieee802_11_elems *elems,
++					    int show_errors)
++{
++	unsigned int oui;
++
++	/* first 3 bytes in vendor specific information element are the IEEE
++	 * OUI of the vendor. The following byte is used a vendor specific
++	 * sub-type. */
++	if (elen < 4) {
++		if (show_errors) {
++			DBG_871X("short vendor specific "
++				   "information element ignored (len=%lu)\n",
++				   (unsigned long) elen);
++		}
++		return -1;
++	}
++
++	oui = RTW_GET_BE24(pos);
++	switch (oui) {
++	case OUI_MICROSOFT:
++		/* Microsoft/Wi-Fi information elements are further typed and
++		 * subtyped */
++		switch (pos[3]) {
++		case 1:
++			/* Microsoft OUI (00:50:F2) with OUI Type 1:
++			 * real WPA information element */
++			elems->wpa_ie = pos;
++			elems->wpa_ie_len = elen;
++			break;
++		case WME_OUI_TYPE: /* this is a Wi-Fi WME info. element */
++			if (elen < 5) {
++				DBG_871X("short WME "
++					   "information element ignored "
++					   "(len=%lu)\n",
++					   (unsigned long) elen);
++				return -1;
++			}
++			switch (pos[4]) {
++			case WME_OUI_SUBTYPE_INFORMATION_ELEMENT:
++			case WME_OUI_SUBTYPE_PARAMETER_ELEMENT:
++				elems->wme = pos;
++				elems->wme_len = elen;
++				break;
++			case WME_OUI_SUBTYPE_TSPEC_ELEMENT:
++				elems->wme_tspec = pos;
++				elems->wme_tspec_len = elen;
++				break;
++			default:
++				DBG_871X("unknown WME "
++					   "information element ignored "
++					   "(subtype=%d len=%lu)\n",
++					   pos[4], (unsigned long) elen);
++				return -1;
++			}
++			break;
++		case 4:
++			/* Wi-Fi Protected Setup (WPS) IE */
++			elems->wps_ie = pos;
++			elems->wps_ie_len = elen;
++			break;
++		default:
++			DBG_871X("Unknown Microsoft "
++				   "information element ignored "
++				   "(type=%d len=%lu)\n",
++				   pos[3], (unsigned long) elen);
++			return -1;
++		}
++		break;
++
++	case OUI_BROADCOM:
++		switch (pos[3]) {
++		case VENDOR_HT_CAPAB_OUI_TYPE:
++			elems->vendor_ht_cap = pos;
++			elems->vendor_ht_cap_len = elen;
++			break;
++		default:
++			DBG_871X("Unknown Broadcom "
++				   "information element ignored "
++				   "(type=%d len=%lu)\n",
++				   pos[3], (unsigned long) elen);
++			return -1;
++		}
++		break;
++
++	default:
++		DBG_871X("unknown vendor specific information "
++			   "element ignored (vendor OUI %02x:%02x:%02x "
++			   "len=%lu)\n",
++			   pos[0], pos[1], pos[2], (unsigned long) elen);
++		return -1;
++	}
++
++	return 0;
++	
++}
++
++/**
++ * ieee802_11_parse_elems - Parse information elements in management frames
++ * @start: Pointer to the start of IEs
++ * @len: Length of IE buffer in octets
++ * @elems: Data structure for parsed elements
++ * @show_errors: Whether to show parsing errors in debug log
++ * Returns: Parsing result
++ */
++ParseRes rtw_ieee802_11_parse_elems(u8 *start, uint len,
++				struct rtw_ieee802_11_elems *elems,
++				int show_errors)
++{
++	uint left = len;
++	u8 *pos = start;
++	int unknown = 0;
++
++	_rtw_memset(elems, 0, sizeof(*elems));
++
++	while (left >= 2) {
++		u8 id, elen;
++
++		id = *pos++;
++		elen = *pos++;
++		left -= 2;
++
++		if (elen > left) {
++			if (show_errors) {
++				DBG_871X("IEEE 802.11 element "
++					   "parse failed (id=%d elen=%d "
++					   "left=%lu)\n",
++					   id, elen, (unsigned long) left);				
++			}
++			return ParseFailed;
++		}
++
++		switch (id) {
++		case WLAN_EID_SSID:
++			elems->ssid = pos;
++			elems->ssid_len = elen;
++			break;
++		case WLAN_EID_SUPP_RATES:
++			elems->supp_rates = pos;
++			elems->supp_rates_len = elen;
++			break;
++		case WLAN_EID_FH_PARAMS:
++			elems->fh_params = pos;
++			elems->fh_params_len = elen;
++			break;
++		case WLAN_EID_DS_PARAMS:
++			elems->ds_params = pos;
++			elems->ds_params_len = elen;
++			break;
++		case WLAN_EID_CF_PARAMS:
++			elems->cf_params = pos;
++			elems->cf_params_len = elen;
++			break;
++		case WLAN_EID_TIM:
++			elems->tim = pos;
++			elems->tim_len = elen;
++			break;
++		case WLAN_EID_IBSS_PARAMS:
++			elems->ibss_params = pos;
++			elems->ibss_params_len = elen;
++			break;
++		case WLAN_EID_CHALLENGE:
++			elems->challenge = pos;
++			elems->challenge_len = elen;
++			break;
++		case WLAN_EID_ERP_INFO:
++			elems->erp_info = pos;
++			elems->erp_info_len = elen;
++			break;
++		case WLAN_EID_EXT_SUPP_RATES:
++			elems->ext_supp_rates = pos;
++			elems->ext_supp_rates_len = elen;
++			break;
++		case WLAN_EID_VENDOR_SPECIFIC:
++			if (rtw_ieee802_11_parse_vendor_specific(pos, elen,
++							     elems,
++							     show_errors))
++				unknown++;
++			break;
++		case WLAN_EID_RSN:
++			elems->rsn_ie = pos;
++			elems->rsn_ie_len = elen;
++			break;
++		case WLAN_EID_PWR_CAPABILITY:
++			elems->power_cap = pos;
++			elems->power_cap_len = elen;
++			break;
++		case WLAN_EID_SUPPORTED_CHANNELS:
++			elems->supp_channels = pos;
++			elems->supp_channels_len = elen;
++			break;
++		case WLAN_EID_MOBILITY_DOMAIN:
++			elems->mdie = pos;
++			elems->mdie_len = elen;
++			break;
++		case WLAN_EID_FAST_BSS_TRANSITION:
++			elems->ftie = pos;
++			elems->ftie_len = elen;
++			break;
++		case WLAN_EID_TIMEOUT_INTERVAL:
++			elems->timeout_int = pos;
++			elems->timeout_int_len = elen;
++			break;
++		case WLAN_EID_HT_CAP:
++			elems->ht_capabilities = pos;
++			elems->ht_capabilities_len = elen;
++			break;
++		case WLAN_EID_HT_OPERATION:
++			elems->ht_operation = pos;
++			elems->ht_operation_len = elen;
++			break;
++		default:
++			unknown++;
++			if (!show_errors)
++				break;
++			DBG_871X("IEEE 802.11 element parse "
++				   "ignored unknown element (id=%d elen=%d)\n",
++				   id, elen);
++			break;
++		}
++
++		left -= elen;
++		pos += elen;
++	}
++
++	if (left)
++		return ParseFailed;
++
++	return unknown ? ParseUnknown : ParseOK;
++	
++}
++
++static u8 key_char2num(u8 ch);
++static u8 key_char2num(u8 ch)
++{
++    if((ch>='0')&&(ch<='9'))
++        return ch - '0';
++    else if ((ch>='a')&&(ch<='f'))
++        return ch - 'a' + 10;
++    else if ((ch>='A')&&(ch<='F'))
++        return ch - 'A' + 10;
++    else
++	 return 0xff;
++}
++
++u8 str_2char2num(u8 hch, u8 lch);
++u8 str_2char2num(u8 hch, u8 lch)
++{
++    return ((key_char2num(hch) * 10 ) + key_char2num(lch));
++}
++
++u8 key_2char2num(u8 hch, u8 lch);
++u8 key_2char2num(u8 hch, u8 lch)
++{
++    return ((key_char2num(hch) << 4) | key_char2num(lch));
++}
++
++u8 convert_ip_addr(u8 hch, u8 mch, u8 lch)
++{
++    return ((key_char2num(hch) * 100) + (key_char2num(mch) * 10 ) + key_char2num(lch));
++}
++
++extern char* rtw_initmac;
++void rtw_macaddr_cfg(u8 *mac_addr)
++{
++	u8 mac[ETH_ALEN];
++	if(mac_addr == NULL)	return;
++	
++	if ( rtw_initmac )
++	{	//	Users specify the mac address
++		int jj,kk;
++
++		for( jj = 0, kk = 0; jj < ETH_ALEN; jj++, kk += 3 )
++		{
++			mac[jj] = key_2char2num(rtw_initmac[kk], rtw_initmac[kk+ 1]);
++		}
++		_rtw_memcpy(mac_addr, mac, ETH_ALEN);
++	}
++	else
++	{	//	Use the mac address stored in the Efuse
++		_rtw_memcpy(mac, mac_addr, ETH_ALEN);
++	}
++	
++	if (((mac[0]==0xff) &&(mac[1]==0xff) && (mac[2]==0xff) &&
++	     (mac[3]==0xff) && (mac[4]==0xff) &&(mac[5]==0xff)) ||
++	    ((mac[0]==0x0) && (mac[1]==0x0) && (mac[2]==0x0) &&
++	     (mac[3]==0x0) && (mac[4]==0x0) &&(mac[5]==0x0)))
++	{
++		mac[0] = 0x00;
++		mac[1] = 0xe0;
++		mac[2] = 0x4c;
++		mac[3] = 0x87;
++		mac[4] = 0x00;
++		mac[5] = 0x00;
++		// use default mac addresss
++		_rtw_memcpy(mac_addr, mac, ETH_ALEN);
++		DBG_871X("MAC Address from efuse error, assign default one !!!\n");
++	}	
++
++	DBG_871X("rtw_macaddr_cfg MAC Address  = "MAC_FMT"\n", MAC_ARG(mac_addr));
++}
++
++void dump_ies(u8 *buf, u32 buf_len) {
++	u8* pos = (u8*)buf;
++	u8 id, len;
++	
++	while(pos-buf<=buf_len){
++		id = *pos;
++		len = *(pos+1);
++
++		DBG_871X("%s ID:%u, LEN:%u\n", __FUNCTION__, id, len);
++		#ifdef CONFIG_P2P
++		dump_p2p_ie(pos, len);
++		#endif
++		dump_wps_ie(pos, len);
++
++		pos+=(2+len);
++	}	
++}
++
++void dump_wps_ie(u8 *ie, u32 ie_len) {
++	u8* pos = (u8*)ie;
++	u16 id;
++	u16 len;
++
++	u8 *wps_ie;
++	uint wps_ielen;
++	
++	wps_ie = rtw_get_wps_ie(ie, ie_len, NULL, &wps_ielen);
++	if(wps_ie != ie || wps_ielen == 0)
++		return;
++
++	pos+=6;
++	while(pos-ie < ie_len){
++		id = RTW_GET_BE16(pos);
++		len = RTW_GET_BE16(pos + 2);
++
++		DBG_871X("%s ID:0x%04x, LEN:%u\n", __FUNCTION__, id, len);
++
++		pos+=(4+len);
++	}	
++}
++
++#ifdef CONFIG_P2P
++/**
++ * rtw_get_p2p_merged_len - Get merged ie length from muitiple p2p ies.
++ * @in_ie: Pointer of the first p2p ie
++ * @in_len: Total len of muiltiple p2p ies
++ * Returns: Length of merged p2p ie length
++ */
++u32 rtw_get_p2p_merged_ies_len(u8 *in_ie, u32 in_len)
++{
++	PNDIS_802_11_VARIABLE_IEs	pIE;
++	u8 OUI[4] = { 0x50, 0x6f, 0x9a, 0x09 };
++	int i=0;
++	int j=0, len=0;
++
++	while( i < in_len)
++	{
++		pIE = (PNDIS_802_11_VARIABLE_IEs)(in_ie+ i);
++
++		if( pIE->ElementID == _VENDOR_SPECIFIC_IE_ && _rtw_memcmp(pIE->data, OUI, 4) )
++		{
++			len += pIE->Length-4; // 4 is P2P OUI length, don't count it in this loop
++		}
++
++		i += (pIE->Length + 2);
++	}
++
++	return len + 4;	// Append P2P OUI length at last.
++}
++
++/**
++ * rtw_p2p_merge_ies - Merge muitiple p2p ies into one
++ * @in_ie: Pointer of the first p2p ie
++ * @in_len: Total len of muiltiple p2p ies
++ * @merge_ie: Pointer of merged ie
++ * Returns: Length of merged p2p ie
++ */
++int rtw_p2p_merge_ies(u8 *in_ie, u32 in_len, u8 *merge_ie)
++{
++	PNDIS_802_11_VARIABLE_IEs	pIE;
++	u8 len = 0;
++	u8 OUI[4] = { 0x50, 0x6f, 0x9a, 0x09 };
++	u8 ELOUI[6] = { 0xDD, 0x00, 0x50, 0x6f, 0x9a, 0x09 };	//EID;Len;OUI, Len would copy at the end of function
++	int i=0;
++
++	if( merge_ie != NULL)
++	{
++		//Set first P2P OUI
++		_rtw_memcpy(merge_ie, ELOUI, 6);
++		merge_ie += 6;
++
++		while( i < in_len)
++		{
++			pIE = (PNDIS_802_11_VARIABLE_IEs)(in_ie+ i);
++
++			// Take out the rest of P2P OUIs
++			if( pIE->ElementID == _VENDOR_SPECIFIC_IE_ && _rtw_memcmp(pIE->data, OUI, 4) )
++			{
++				_rtw_memcpy( merge_ie, pIE->data +4, pIE->Length -4);
++				len += pIE->Length-4;
++				merge_ie += pIE->Length-4;
++			}
++
++			i += (pIE->Length + 2);
++		}
++
++		return len + 4;	// 4 is for P2P OUI
++
++	}
++
++	return 0;
++}
++
++void dump_p2p_ie(u8 *ie, u32 ie_len) {
++	u8* pos = (u8*)ie;
++	u8 id;
++	u16 len;
++
++	u8 *p2p_ie;
++	uint p2p_ielen;
++	
++	p2p_ie = rtw_get_p2p_ie(ie, ie_len, NULL, &p2p_ielen);
++	if(p2p_ie != ie || p2p_ielen == 0)
++		return;
++
++	pos+=6;
++	while(pos-ie < ie_len){
++		id = *pos;
++		len = RTW_GET_LE16(pos+1);
++
++		DBG_871X("%s ID:%u, LEN:%u\n", __FUNCTION__, id, len);
++
++		pos+=(3+len);
++	}	
++}
++
++/**
++ * rtw_get_p2p_ie - Search P2P IE from a series of IEs
++ * @in_ie: Address of IEs to search
++ * @in_len: Length limit from in_ie
++ * @p2p_ie: If not NULL and P2P IE is found, P2P IE will be copied to the buf starting from p2p_ie
++ * @p2p_ielen: If not NULL and P2P IE is found, will set to the length of the entire P2P IE
++ *
++ * Returns: The address of the P2P IE found, or NULL
++ */
++u8 *rtw_get_p2p_ie(u8 *in_ie, int in_len, u8 *p2p_ie, uint *p2p_ielen)
++{
++	uint cnt = 0;
++	u8 *p2p_ie_ptr;
++	u8 eid, p2p_oui[4]={0x50,0x6F,0x9A,0x09};
++
++	if ( p2p_ielen != NULL )
++		*p2p_ielen = 0;
++
++	while(cnt<in_len)
++	{
++		eid = in_ie[cnt];
++		if ((in_len < 0) || (cnt > MAX_IE_SZ)) {
++#ifdef PLATFORM_LINUX
++			dump_stack();
++#endif
++			return NULL;
++		}
++		if( ( eid == _VENDOR_SPECIFIC_IE_ ) && ( _rtw_memcmp( &in_ie[cnt+2], p2p_oui, 4) == _TRUE ) )
++		{
++			p2p_ie_ptr = in_ie + cnt;
++		
++			if ( p2p_ie != NULL )
++			{
++				_rtw_memcpy( p2p_ie, &in_ie[ cnt ], in_ie[ cnt + 1 ] + 2 );
++			}
++
++			if ( p2p_ielen != NULL )
++			{
++				*p2p_ielen = in_ie[ cnt + 1 ] + 2;
++			}
++			
++			return p2p_ie_ptr;
++
++			break;
++		}
++		else
++		{
++			cnt += in_ie[ cnt + 1 ] +2; //goto next	
++		}		
++		
++	}	
++
++	return NULL;
++
++}
++
++/**
++ * rtw_get_p2p_attr - Search a specific P2P attribute from a given P2P IE
++ * @p2p_ie: Address of P2P IE to search
++ * @p2p_ielen: Length limit from p2p_ie
++ * @target_attr_id: The attribute ID of P2P attribute to search
++ * @buf_attr: If not NULL and the P2P attribute is found, P2P attribute will be copied to the buf starting from buf_attr
++ * @len_attr: If not NULL and the P2P attribute is found, will set to the length of the entire P2P attribute
++ *
++ * Returns: the address of the specific WPS attribute found, or NULL
++ */
++u8 *rtw_get_p2p_attr(u8 *p2p_ie, uint p2p_ielen, u8 target_attr_id ,u8 *buf_attr, u32 *len_attr)
++{
++	u8 *attr_ptr = NULL;
++	u8 *target_attr_ptr = NULL;
++	u8 p2p_oui[4]={0x50,0x6F,0x9A,0x09};
++
++	if(len_attr)
++		*len_attr = 0;
++
++	if ( !p2p_ie || ( p2p_ie[0] != _VENDOR_SPECIFIC_IE_ ) ||
++		( _rtw_memcmp( p2p_ie + 2, p2p_oui , 4 ) != _TRUE ) )
++	{
++		return attr_ptr;
++	}
++
++	// 6 = 1(Element ID) + 1(Length) + 3 (OUI) + 1(OUI Type)
++	attr_ptr = p2p_ie + 6; //goto first attr
++	
++	while(attr_ptr - p2p_ie < p2p_ielen)
++	{
++		// 3 = 1(Attribute ID) + 2(Length)
++		u8 attr_id = *attr_ptr;
++		u16 attr_data_len = RTW_GET_LE16(attr_ptr + 1);
++		u16 attr_len = attr_data_len + 3;
++		
++		//DBG_871X("%s attr_ptr:%p, id:%u, length:%u\n", __FUNCTION__, attr_ptr, attr_id, attr_data_len);
++		if( attr_id == target_attr_id )
++		{
++			target_attr_ptr = attr_ptr;
++		
++			if(buf_attr)
++				_rtw_memcpy(buf_attr, attr_ptr, attr_len);
++			
++			if(len_attr)
++				*len_attr = attr_len;
++			
++			break;
++		}
++		else
++		{
++			attr_ptr += attr_len; //goto next
++		}		
++		
++	}	
++
++	return target_attr_ptr;
++}
++
++/**
++ * rtw_get_p2p_attr_content - Search a specific P2P attribute content from a given P2P IE
++ * @p2p_ie: Address of P2P IE to search
++ * @p2p_ielen: Length limit from p2p_ie
++ * @target_attr_id: The attribute ID of P2P attribute to search
++ * @buf_content: If not NULL and the P2P attribute is found, P2P attribute content will be copied to the buf starting from buf_content
++ * @len_content: If not NULL and the P2P attribute is found, will set to the length of the P2P attribute content
++ *
++ * Returns: the address of the specific P2P attribute content found, or NULL
++ */
++u8 *rtw_get_p2p_attr_content(u8 *p2p_ie, uint p2p_ielen, u8 target_attr_id ,u8 *buf_content, uint *len_content)
++{
++	u8 *attr_ptr;
++	u32 attr_len;
++
++	if(len_content)
++		*len_content = 0;
++	
++	attr_ptr = rtw_get_p2p_attr(p2p_ie, p2p_ielen, target_attr_id, NULL, &attr_len);
++
++	if(attr_ptr && attr_len)
++	{
++		if(buf_content)
++			_rtw_memcpy(buf_content, attr_ptr+3, attr_len-3);
++
++		if(len_content)
++			*len_content = attr_len-3;
++
++		return attr_ptr+3;
++	}
++
++	return NULL;
++}
++
++u32 rtw_set_p2p_attr_content(u8 *pbuf, u8 attr_id, u16 attr_len, u8 *pdata_attr)
++{	
++	u32 a_len;
++
++	*pbuf = attr_id;
++		
++	//*(u16*)(pbuf + 1) = cpu_to_le16(attr_len);
++	RTW_PUT_LE16(pbuf + 1, attr_len);
++
++	if(pdata_attr)
++		_rtw_memcpy(pbuf + 3, pdata_attr, attr_len);		
++		
++	a_len = attr_len + 3;
++		
++	return a_len;
++}
++
++static uint rtw_p2p_attr_remove(u8 *ie, uint ielen_ori, u8 attr_id)
++{
++	u8 *target_attr;
++	u32 target_attr_len;
++	uint ielen = ielen_ori;
++	int index=0;
++
++	while(1) {
++		target_attr=rtw_get_p2p_attr(ie, ielen, attr_id, NULL, &target_attr_len);
++		if(target_attr && target_attr_len)
++		{
++			u8 *next_attr = target_attr+target_attr_len;
++			uint remain_len = ielen-(next_attr-ie);
++			//dump_ies(ie, ielen);
++			#if 0
++			DBG_871X("[%d] ie:%p, ielen:%u\n"
++				"target_attr:%p, target_attr_len:%u\n"
++				"next_attr:%p, remain_len:%u\n"
++				, index++
++				, ie, ielen
++				, target_attr, target_attr_len
++				, next_attr, remain_len
++			);
++			#endif
++
++			_rtw_memset(target_attr, 0, target_attr_len);
++			_rtw_memcpy(target_attr, next_attr, remain_len);
++			_rtw_memset(target_attr+remain_len, 0, target_attr_len);
++			*(ie+1) -= target_attr_len;
++			ielen-=target_attr_len;
++		}
++		else
++		{
++			//if(index>0)
++			//	dump_ies(ie, ielen);
++			break;
++		}
++	}
++
++	return ielen;
++}
++
++void rtw_WLAN_BSSID_EX_remove_p2p_attr(WLAN_BSSID_EX *bss_ex, u8 attr_id)
++{
++	u8 *p2p_ie;
++	uint p2p_ielen, p2p_ielen_ori;
++	int cnt;
++	
++	if( (p2p_ie=rtw_get_p2p_ie(bss_ex->IEs+_FIXED_IE_LENGTH_, bss_ex->IELength-_FIXED_IE_LENGTH_, NULL, &p2p_ielen_ori)) ) 
++	{
++		#if 0
++		if(rtw_get_p2p_attr(p2p_ie, p2p_ielen_ori, attr_id, NULL, NULL)) {
++			DBG_871X("rtw_get_p2p_attr: GOT P2P_ATTR:%u!!!!!!!!\n", attr_id);
++			dump_ies(bss_ex->IEs+_FIXED_IE_LENGTH_, bss_ex->IELength-_FIXED_IE_LENGTH_);
++		}
++		#endif
++
++		p2p_ielen=rtw_p2p_attr_remove(p2p_ie, p2p_ielen_ori, attr_id);
++		if(p2p_ielen != p2p_ielen_ori) {
++			
++			u8 *next_ie_ori = p2p_ie+p2p_ielen_ori;
++			u8 *next_ie = p2p_ie+p2p_ielen;
++			uint remain_len = bss_ex->IELength-(next_ie_ori-bss_ex->IEs);
++
++			_rtw_memcpy(next_ie, next_ie_ori, remain_len);
++			_rtw_memset(next_ie+remain_len, 0, p2p_ielen_ori-p2p_ielen);
++			bss_ex->IELength -= p2p_ielen_ori-p2p_ielen;
++
++			#if 0
++			DBG_871X("remove P2P_ATTR:%u!\n", attr_id);
++			dump_ies(bss_ex->IEs+_FIXED_IE_LENGTH_, bss_ex->IELength-_FIXED_IE_LENGTH_);
++			#endif
++		}
++	}
++}
++
++#endif //CONFIG_P2P
++
++#ifdef CONFIG_WFD
++int rtw_get_wfd_ie(u8 *in_ie, int in_len, u8 *wfd_ie, uint *wfd_ielen)
++{
++	int match;
++	uint cnt = 0;	
++	u8 eid, wfd_oui[4]={0x50,0x6F,0x9A,0x0A};
++
++
++	match=_FALSE;
++
++	if ( in_len < 0 )
++	{
++		return match;
++	}
++	
++	while(cnt<in_len)
++	{
++		eid = in_ie[cnt];
++		
++		if( ( eid == _VENDOR_SPECIFIC_IE_ ) && ( _rtw_memcmp( &in_ie[cnt+2], wfd_oui, 4) == _TRUE ) )
++		{
++			if ( wfd_ie != NULL )
++			{
++				_rtw_memcpy( wfd_ie, &in_ie[ cnt ], in_ie[ cnt + 1 ] + 2 );
++			
++			}
++			else
++			{
++				if ( wfd_ielen != NULL )
++				{
++					*wfd_ielen = 0;
++				}
++			}
++			
++			if ( wfd_ielen != NULL )
++			{
++				*wfd_ielen = in_ie[ cnt + 1 ] + 2;
++			}
++			
++			cnt += in_ie[ cnt + 1 ] + 2;
++
++			match = _TRUE;
++			break;
++		}
++		else
++		{
++			cnt += in_ie[ cnt + 1 ] +2; //goto next	
++		}		
++		
++	}	
++
++	if ( match == _TRUE )
++	{
++		match = cnt;
++	}
++	
++	return match;
++
++}
++
++//	attr_content: The output buffer, contains the "body field" of WFD attribute.
++//	attr_contentlen: The data length of the "body field" of WFD attribute.
++int rtw_get_wfd_attr_content(u8 *wfd_ie, uint wfd_ielen, u8 target_attr_id ,u8 *attr_content, uint *attr_contentlen)
++{
++	int match;
++	uint cnt = 0;	
++	u8 attr_id, wfd_oui[4]={0x50,0x6F,0x9A,0x0A};
++
++
++	match=_FALSE;
++
++	if ( ( wfd_ie[ 0 ] != _VENDOR_SPECIFIC_IE_ ) ||
++		( _rtw_memcmp( wfd_ie + 2, wfd_oui , 4 ) != _TRUE ) )
++	{
++		return( match );
++	}
++
++	//	1 ( WFD IE ) + 1 ( Length ) + 3 ( OUI ) + 1 ( OUI Type )
++	cnt = 6;
++	while( cnt < wfd_ielen )
++	{
++		u16 attrlen = RTW_GET_BE16(wfd_ie + cnt + 1);		
++		
++		attr_id = wfd_ie[cnt];
++		if( attr_id == target_attr_id )
++		{
++			//	3 -> 1 byte for attribute ID field, 2 bytes for length field
++			if(attr_content)
++				_rtw_memcpy( attr_content, &wfd_ie[ cnt + 3 ], attrlen );
++			
++			if(attr_contentlen)
++				*attr_contentlen = attrlen;
++			
++			cnt += attrlen + 3;
++
++			match = _TRUE;
++			break;
++		}
++		else
++		{
++			cnt += attrlen + 3; //goto next	
++		}		
++		
++	}	
++
++	return match;
++
++}
++#endif // CONFIG_WFD
++
++//Baron adds to avoid FreeBSD warning
++int ieee80211_is_empty_essid(const char *essid, int essid_len)
++{
++	/* Single white space is for Linksys APs */
++	if (essid_len == 1 && essid[0] == ' ')
++		return 1;
++
++	/* Otherwise, if the entire essid is 0, we assume it is hidden */
++	while (essid_len) {
++		essid_len--;
++		if (essid[essid_len] != '\0')
++			return 0;
++	}
++
++	return 1;
++}
++
++int ieee80211_get_hdrlen(u16 fc)
++{
++	int hdrlen = 24;
++
++	switch (WLAN_FC_GET_TYPE(fc)) {
++	case RTW_IEEE80211_FTYPE_DATA:
++		if (fc & RTW_IEEE80211_STYPE_QOS_DATA)
++			hdrlen += 2;
++		if ((fc & RTW_IEEE80211_FCTL_FROMDS) && (fc & RTW_IEEE80211_FCTL_TODS))
++			hdrlen += 6; /* Addr4 */
++		break;
++	case RTW_IEEE80211_FTYPE_CTL:
++		switch (WLAN_FC_GET_STYPE(fc)) {
++		case RTW_IEEE80211_STYPE_CTS:
++		case RTW_IEEE80211_STYPE_ACK:
++			hdrlen = 10;
++			break;
++		default:
++			hdrlen = 16;
++			break;
++		}
++		break;
++	}
++
++	return hdrlen;
++}
++
++//show MCS rate, unit: 100Kbps
++u16 rtw_mcs_rate(u8 rf_type, u8 bw_40MHz, u8 short_GI_20, u8 short_GI_40, unsigned char * MCS_rate)
++{
++	u16 max_rate = 0;
++	
++	if(rf_type == RF_1T1R)
++	{
++		if(MCS_rate[0] & BIT(7))
++			max_rate = (bw_40MHz) ? ((short_GI_40)?1500:1350):((short_GI_20)?722:650);
++		else if(MCS_rate[0] & BIT(6))
++			max_rate = (bw_40MHz) ? ((short_GI_40)?1350:1215):((short_GI_20)?650:585);
++		else if(MCS_rate[0] & BIT(5))
++			max_rate = (bw_40MHz) ? ((short_GI_40)?1200:1080):((short_GI_20)?578:520);
++		else if(MCS_rate[0] & BIT(4))
++			max_rate = (bw_40MHz) ? ((short_GI_40)?900:810):((short_GI_20)?433:390);
++		else if(MCS_rate[0] & BIT(3))
++			max_rate = (bw_40MHz) ? ((short_GI_40)?600:540):((short_GI_20)?289:260);
++		else if(MCS_rate[0] & BIT(2))
++			max_rate = (bw_40MHz) ? ((short_GI_40)?450:405):((short_GI_20)?217:195);
++		else if(MCS_rate[0] & BIT(1))
++			max_rate = (bw_40MHz) ? ((short_GI_40)?300:270):((short_GI_20)?144:130);
++		else if(MCS_rate[0] & BIT(0))
++			max_rate = (bw_40MHz) ? ((short_GI_40)?150:135):((short_GI_20)?72:65);
++	}
++	else
++	{
++		if(MCS_rate[1])
++		{
++			if(MCS_rate[1] & BIT(7))
++				max_rate = (bw_40MHz) ? ((short_GI_40)?3000:2700):((short_GI_20)?1444:1300);
++			else if(MCS_rate[1] & BIT(6))
++				max_rate = (bw_40MHz) ? ((short_GI_40)?2700:2430):((short_GI_20)?1300:1170);
++			else if(MCS_rate[1] & BIT(5))
++				max_rate = (bw_40MHz) ? ((short_GI_40)?2400:2160):((short_GI_20)?1156:1040);
++			else if(MCS_rate[1] & BIT(4))
++				max_rate = (bw_40MHz) ? ((short_GI_40)?1800:1620):((short_GI_20)?867:780);
++			else if(MCS_rate[1] & BIT(3))
++				max_rate = (bw_40MHz) ? ((short_GI_40)?1200:1080):((short_GI_20)?578:520);
++			else if(MCS_rate[1] & BIT(2))
++				max_rate = (bw_40MHz) ? ((short_GI_40)?900:810):((short_GI_20)?433:390);
++			else if(MCS_rate[1] & BIT(1))
++				max_rate = (bw_40MHz) ? ((short_GI_40)?600:540):((short_GI_20)?289:260);
++			else if(MCS_rate[1] & BIT(0))
++				max_rate = (bw_40MHz) ? ((short_GI_40)?300:270):((short_GI_20)?144:130);
++		}
++		else
++		{
++			if(MCS_rate[0] & BIT(7))
++				max_rate = (bw_40MHz) ? ((short_GI_40)?1500:1350):((short_GI_20)?722:650);
++			else if(MCS_rate[0] & BIT(6))
++				max_rate = (bw_40MHz) ? ((short_GI_40)?1350:1215):((short_GI_20)?650:585);
++			else if(MCS_rate[0] & BIT(5))
++				max_rate = (bw_40MHz) ? ((short_GI_40)?1200:1080):((short_GI_20)?578:520);
++			else if(MCS_rate[0] & BIT(4))
++				max_rate = (bw_40MHz) ? ((short_GI_40)?900:810):((short_GI_20)?433:390);
++			else if(MCS_rate[0] & BIT(3))
++				max_rate = (bw_40MHz) ? ((short_GI_40)?600:540):((short_GI_20)?289:260);
++			else if(MCS_rate[0] & BIT(2))
++				max_rate = (bw_40MHz) ? ((short_GI_40)?450:405):((short_GI_20)?217:195);
++			else if(MCS_rate[0] & BIT(1))
++				max_rate = (bw_40MHz) ? ((short_GI_40)?300:270):((short_GI_20)?144:130);
++			else if(MCS_rate[0] & BIT(0))
++				max_rate = (bw_40MHz) ? ((short_GI_40)?150:135):((short_GI_20)?72:65);
++		}
++	}
++	return max_rate;
++}
++
++int rtw_action_frame_parse(const u8 *frame, u32 frame_len, u8* category, u8 *action)
++{
++	const u8 *frame_body = frame + sizeof(struct rtw_ieee80211_hdr_3addr);
++	u16 fc;
++	u8 c, a;
++
++	fc = le16_to_cpu(((struct rtw_ieee80211_hdr_3addr *)frame)->frame_ctl);
++
++	if ((fc & (RTW_IEEE80211_FCTL_FTYPE|RTW_IEEE80211_FCTL_STYPE))
++		!= (RTW_IEEE80211_FTYPE_MGMT|RTW_IEEE80211_STYPE_ACTION)
++	)
++	{
++		return _FALSE;
++	}
++
++	c = frame_body[0];
++
++	switch(c) {
++	case RTW_WLAN_CATEGORY_P2P: /* vendor-specific */
++		break;
++	default:
++		a = frame_body[1];
++	}
++
++	if (category)
++		*category = c;
++	if (action)
++		*action = a;
++
++	return _TRUE;
++}
++
++static const char *_action_public_str[] = {
++	"ACT_PUB_BSSCOEXIST",
++	"ACT_PUB_DSE_ENABLE",
++	"ACT_PUB_DSE_DEENABLE",
++	"ACT_PUB_DSE_REG_LOCATION",
++	"ACT_PUB_EXT_CHL_SWITCH",
++	"ACT_PUB_DSE_MSR_REQ",
++	"ACT_PUB_DSE_MSR_RPRT",
++	"ACT_PUB_MP",
++	"ACT_PUB_DSE_PWR_CONSTRAINT",
++	"ACT_PUB_VENDOR",
++	"ACT_PUB_GAS_INITIAL_REQ",
++	"ACT_PUB_GAS_INITIAL_RSP",
++	"ACT_PUB_GAS_COMEBACK_REQ",
++	"ACT_PUB_GAS_COMEBACK_RSP",
++	"ACT_PUB_TDLS_DISCOVERY_RSP",
++	"ACT_PUB_LOCATION_TRACK",
++	"ACT_PUB_RSVD",
++};
++
++const char *action_public_str(u8 action)
++{
++	action = (action >= ACT_PUBLIC_MAX) ? ACT_PUBLIC_MAX : action;
++	return _action_public_str[action];
++}
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_io.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_io.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_io.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_io.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,464 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++/*
++
++The purpose of rtw_io.c
++
++a. provides the API
++
++b. provides the protocol engine
++
++c. provides the software interface between caller and the hardware interface
++
++
++Compiler Flag Option:
++
++1. CONFIG_SDIO_HCI:
++    a. USE_SYNC_IRP:  Only sync operations are provided.
++    b. USE_ASYNC_IRP:Both sync/async operations are provided.
++
++2. CONFIG_USB_HCI:
++   a. USE_ASYNC_IRP: Both sync/async operations are provided.
++
++3. CONFIG_CFIO_HCI:
++   b. USE_SYNC_IRP: Only sync operations are provided.
++
++
++Only sync read/rtw_write_mem operations are provided.
++
++jackson@realtek.com.tw
++
++*/
++
++#define _RTW_IO_C_
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <rtw_io.h>
++#include <osdep_intf.h>
++
++#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS)
++#error "Shall be Linux or Windows, but not both!\n"
++#endif
++
++#ifdef CONFIG_SDIO_HCI
++#include <sdio_ops.h>
++#endif
++
++#ifdef CONFIG_USB_HCI
++#include <usb_ops.h>
++#endif
++
++#ifdef CONFIG_PCI_HCI
++#include <pci_ops.h>
++#endif
++
++
++u8 _rtw_read8(_adapter *adapter, u32 addr)
++{
++	u8 r_val;
++	//struct	io_queue  	*pio_queue = (struct io_queue *)adapter->pio_queue;
++	struct io_priv *pio_priv = &adapter->iopriv;
++	struct	intf_hdl		*pintfhdl = &(pio_priv->intf);
++	u8 (*_read8)(struct intf_hdl *pintfhdl, u32 addr);
++	_func_enter_;
++	_read8 = pintfhdl->io_ops._read8;
++
++	r_val = _read8(pintfhdl, addr);
++	_func_exit_;
++	return r_val;
++}
++
++u16 _rtw_read16(_adapter *adapter, u32 addr)
++{
++	u16 r_val;
++	//struct	io_queue  	*pio_queue = (struct io_queue *)adapter->pio_queue;
++	struct io_priv *pio_priv = &adapter->iopriv;
++	struct	intf_hdl		*pintfhdl = &(pio_priv->intf);
++	u16 	(*_read16)(struct intf_hdl *pintfhdl, u32 addr);
++	_func_enter_;
++	_read16 = pintfhdl->io_ops._read16;
++
++	r_val = _read16(pintfhdl, addr);
++	_func_exit_;
++	return r_val;
++}
++
++u32 _rtw_read32(_adapter *adapter, u32 addr)
++{
++	u32 r_val;
++	//struct	io_queue  	*pio_queue = (struct io_queue *)adapter->pio_queue;
++	struct io_priv *pio_priv = &adapter->iopriv;
++	struct	intf_hdl		*pintfhdl = &(pio_priv->intf);
++	u32 	(*_read32)(struct intf_hdl *pintfhdl, u32 addr);
++	_func_enter_;
++	_read32 = pintfhdl->io_ops._read32;
++
++	r_val = _read32(pintfhdl, addr);
++	_func_exit_;
++	return r_val;
++
++}
++
++int _rtw_write8(_adapter *adapter, u32 addr, u8 val)
++{
++	//struct	io_queue  	*pio_queue = (struct io_queue *)adapter->pio_queue;
++	struct io_priv *pio_priv = &adapter->iopriv;
++	struct	intf_hdl		*pintfhdl = &(pio_priv->intf);
++	int (*_write8)(struct intf_hdl *pintfhdl, u32 addr, u8 val);
++	int ret;
++	_func_enter_;
++	_write8 = pintfhdl->io_ops._write8;
++
++	ret = _write8(pintfhdl, addr, val);
++	_func_exit_;
++	
++	return RTW_STATUS_CODE(ret);
++}
++int _rtw_write16(_adapter *adapter, u32 addr, u16 val)
++{
++	//struct	io_queue  	*pio_queue = (struct io_queue *)adapter->pio_queue;
++	struct io_priv *pio_priv = &adapter->iopriv;
++	struct	intf_hdl		*pintfhdl = &(pio_priv->intf);
++	int (*_write16)(struct intf_hdl *pintfhdl, u32 addr, u16 val);
++	int ret;
++	_func_enter_;
++	_write16 = pintfhdl->io_ops._write16;
++
++	ret = _write16(pintfhdl, addr, val);
++	_func_exit_;
++
++	return RTW_STATUS_CODE(ret);
++}
++int _rtw_write32(_adapter *adapter, u32 addr, u32 val)
++{
++	//struct	io_queue  	*pio_queue = (struct io_queue *)adapter->pio_queue;
++	struct io_priv *pio_priv = &adapter->iopriv;
++	struct	intf_hdl		*pintfhdl = &(pio_priv->intf);
++	int (*_write32)(struct intf_hdl *pintfhdl, u32 addr, u32 val);
++	int ret;
++	_func_enter_;
++	_write32 = pintfhdl->io_ops._write32;
++
++	ret = _write32(pintfhdl, addr, val);
++	_func_exit_;
++
++	return RTW_STATUS_CODE(ret);
++}
++
++int _rtw_writeN(_adapter *adapter, u32 addr ,u32 length , u8 *pdata)
++{
++	//struct	io_queue  	*pio_queue = (struct io_queue *)adapter->pio_queue;
++	struct io_priv *pio_priv = &adapter->iopriv;
++        struct	intf_hdl	*pintfhdl = (struct intf_hdl*)(&(pio_priv->intf));
++	int (*_writeN)(struct intf_hdl *pintfhdl, u32 addr,u32 length, u8 *pdata);
++	int ret;
++	_func_enter_;
++	_writeN = pintfhdl->io_ops._writeN;
++
++	ret = _writeN(pintfhdl, addr,length,pdata);
++	_func_exit_;
++
++	return RTW_STATUS_CODE(ret);
++}
++int _rtw_write8_async(_adapter *adapter, u32 addr, u8 val)
++{
++	//struct	io_queue  	*pio_queue = (struct io_queue *)adapter->pio_queue;
++	struct io_priv *pio_priv = &adapter->iopriv;
++	struct	intf_hdl		*pintfhdl = &(pio_priv->intf);
++	int (*_write8_async)(struct intf_hdl *pintfhdl, u32 addr, u8 val);
++	int ret;
++	_func_enter_;
++	_write8_async = pintfhdl->io_ops._write8_async;
++
++	ret = _write8_async(pintfhdl, addr, val);
++	_func_exit_;
++
++	return RTW_STATUS_CODE(ret);
++}
++int _rtw_write16_async(_adapter *adapter, u32 addr, u16 val)
++{
++	//struct	io_queue  	*pio_queue = (struct io_queue *)adapter->pio_queue;
++	struct io_priv *pio_priv = &adapter->iopriv;
++	struct	intf_hdl		*pintfhdl = &(pio_priv->intf);
++	int (*_write16_async)(struct intf_hdl *pintfhdl, u32 addr, u16 val);
++	int ret;
++	_func_enter_;
++	_write16_async = pintfhdl->io_ops._write16_async;
++
++	ret = _write16_async(pintfhdl, addr, val);
++	_func_exit_;
++
++	return RTW_STATUS_CODE(ret);
++}
++int _rtw_write32_async(_adapter *adapter, u32 addr, u32 val)
++{
++	//struct	io_queue  	*pio_queue = (struct io_queue *)adapter->pio_queue;
++	struct io_priv *pio_priv = &adapter->iopriv;
++	struct	intf_hdl		*pintfhdl = &(pio_priv->intf);
++	int (*_write32_async)(struct intf_hdl *pintfhdl, u32 addr, u32 val);
++	int ret;
++	_func_enter_;
++	_write32_async = pintfhdl->io_ops._write32_async;
++
++	ret = _write32_async(pintfhdl, addr, val);
++	_func_exit_;
++
++	return RTW_STATUS_CODE(ret);
++}
++void _rtw_read_mem(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem)
++{
++	void (*_read_mem)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem);
++	//struct	io_queue  	*pio_queue = (struct io_queue *)adapter->pio_queue;
++	struct io_priv *pio_priv = &adapter->iopriv;
++	struct	intf_hdl		*pintfhdl = &(pio_priv->intf);
++
++	_func_enter_;
++
++	if( (adapter->bDriverStopped ==_TRUE) || (adapter->bSurpriseRemoved == _TRUE))
++	{
++	     RT_TRACE(_module_rtl871x_io_c_, _drv_info_, ("rtw_read_mem:bDriverStopped(%d) OR bSurpriseRemoved(%d)", adapter->bDriverStopped, adapter->bSurpriseRemoved));	    
++	     return;
++	}
++
++	_read_mem = pintfhdl->io_ops._read_mem;
++
++	_read_mem(pintfhdl, addr, cnt, pmem);
++
++	_func_exit_;
++
++}
++
++void _rtw_write_mem(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem)
++{
++	void (*_write_mem)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem);
++	//struct	io_queue  	*pio_queue = (struct io_queue *)adapter->pio_queue;
++	struct io_priv *pio_priv = &adapter->iopriv;
++	struct	intf_hdl		*pintfhdl = &(pio_priv->intf);
++
++	_func_enter_;
++
++	_write_mem = pintfhdl->io_ops._write_mem;
++
++	_write_mem(pintfhdl, addr, cnt, pmem);
++
++	_func_exit_;
++
++}
++
++void _rtw_read_port(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem)
++{
++	u32 (*_read_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem);
++	//struct	io_queue  	*pio_queue = (struct io_queue *)adapter->pio_queue;
++	struct io_priv *pio_priv = &adapter->iopriv;
++	struct	intf_hdl		*pintfhdl = &(pio_priv->intf);
++
++	_func_enter_;
++
++	if( (adapter->bDriverStopped ==_TRUE) || (adapter->bSurpriseRemoved == _TRUE))
++	{
++	     RT_TRACE(_module_rtl871x_io_c_, _drv_info_, ("rtw_read_port:bDriverStopped(%d) OR bSurpriseRemoved(%d)", adapter->bDriverStopped, adapter->bSurpriseRemoved));	    
++	     return;
++	}
++
++	_read_port = pintfhdl->io_ops._read_port;
++
++	_read_port(pintfhdl, addr, cnt, pmem);
++
++	_func_exit_;
++
++}
++
++void _rtw_read_port_cancel(_adapter *adapter)
++{
++	void (*_read_port_cancel)(struct intf_hdl *pintfhdl);
++	struct io_priv *pio_priv = &adapter->iopriv;
++	struct intf_hdl *pintfhdl = &(pio_priv->intf);
++
++	_read_port_cancel = pintfhdl->io_ops._read_port_cancel;
++
++	if(_read_port_cancel)
++		_read_port_cancel(pintfhdl);
++
++}
++
++u32 _rtw_write_port(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem)
++{
++	u32 (*_write_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem);
++	//struct	io_queue  	*pio_queue = (struct io_queue *)adapter->pio_queue;
++	struct io_priv *pio_priv = &adapter->iopriv;
++	struct	intf_hdl		*pintfhdl = &(pio_priv->intf);
++	u32 ret = _SUCCESS;
++
++	_func_enter_;
++
++	_write_port = pintfhdl->io_ops._write_port;
++	
++	ret = _write_port(pintfhdl, addr, cnt, pmem);
++
++	 _func_exit_;
++
++	return ret;
++}
++
++u32 _rtw_write_port_and_wait(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem, int timeout_ms)
++{
++	int ret = _SUCCESS;
++	struct xmit_buf *pxmitbuf = (struct xmit_buf *)pmem;
++	struct submit_ctx sctx;
++
++	rtw_sctx_init(&sctx, timeout_ms);
++	pxmitbuf->sctx = &sctx;
++
++	ret = _rtw_write_port(adapter, addr, cnt, pmem);
++
++	if (ret == _SUCCESS)
++		ret = rtw_sctx_wait(&sctx);
++
++	 return ret;
++}
++
++void _rtw_write_port_cancel(_adapter *adapter)
++{
++	void (*_write_port_cancel)(struct intf_hdl *pintfhdl);
++	struct io_priv *pio_priv = &adapter->iopriv;
++	struct intf_hdl *pintfhdl = &(pio_priv->intf);
++
++	_write_port_cancel = pintfhdl->io_ops._write_port_cancel;
++
++	if(_write_port_cancel)
++		_write_port_cancel(pintfhdl);
++
++}
++
++int rtw_init_io_priv(_adapter *padapter, void (*set_intf_ops)(struct _io_ops *pops))
++{
++	struct io_priv	*piopriv = &padapter->iopriv;
++	struct intf_hdl *pintf = &piopriv->intf;
++
++	if (set_intf_ops == NULL)
++		return _FAIL;
++
++	piopriv->padapter = padapter;
++	pintf->padapter = padapter;
++	pintf->pintf_dev = adapter_to_dvobj(padapter);
++
++	set_intf_ops(&pintf->io_ops);
++
++	return _SUCCESS;
++}
++
++#ifdef DBG_IO
++
++u16 read_sniff_ranges[][2] = {
++	//{0x550, 0x551},
++}; 
++
++u16 write_sniff_ranges[][2] = {
++	//{0x550, 0x551},
++	//{0x4c, 0x4c},
++}; 
++
++int read_sniff_num = sizeof(read_sniff_ranges)/sizeof(u16)/2;
++int write_sniff_num = sizeof(write_sniff_ranges)/sizeof(u16)/2;
++
++bool match_read_sniff_ranges(u16 addr, u16 len)
++{
++	int i;
++	for (i = 0; i<read_sniff_num; i++) {
++		if (addr + len > read_sniff_ranges[i][0] && addr <= read_sniff_ranges[i][1])
++			return _TRUE;
++	}
++	
++	return _FALSE;
++}
++
++bool match_write_sniff_ranges(u16 addr, u16 len)
++{
++	int i;
++	for (i = 0; i<write_sniff_num; i++) {
++		if (addr + len > write_sniff_ranges[i][0] && addr <= write_sniff_ranges[i][1])
++			return _TRUE;
++	}
++	
++	return _FALSE;
++}
++
++u8 dbg_rtw_read8(_adapter *adapter, u32 addr, const char *caller, const int line)
++{
++	u8 val = _rtw_read8(adapter, addr);
++
++	if (match_read_sniff_ranges(addr, 1))
++		DBG_871X("DBG_IO %s:%d rtw_read8(0x%04x) return 0x%02x\n", caller, line, addr, val);
++
++	return val;
++}
++
++u16 dbg_rtw_read16(_adapter *adapter, u32 addr, const char *caller, const int line)
++{
++	u16 val = _rtw_read16(adapter, addr);
++	
++	if (match_read_sniff_ranges(addr, 2))
++		DBG_871X("DBG_IO %s:%d rtw_read16(0x%04x) return 0x%04x\n", caller, line, addr, val);
++
++	return val;
++}
++
++u32 dbg_rtw_read32(_adapter *adapter, u32 addr, const char *caller, const int line)
++{
++	u32 val = _rtw_read32(adapter, addr);
++	
++	if (match_read_sniff_ranges(addr, 4))
++		DBG_871X("DBG_IO %s:%d rtw_read32(0x%04x) return 0x%08x\n", caller, line, addr, val);
++
++	return val;
++}
++
++int dbg_rtw_write8(_adapter *adapter, u32 addr, u8 val, const char *caller, const int line)
++{
++	if (match_write_sniff_ranges(addr, 1))
++		DBG_871X("DBG_IO %s:%d rtw_write8(0x%04x, 0x%02x)\n", caller, line, addr, val);
++	
++	return _rtw_write8(adapter, addr, val);
++}
++int dbg_rtw_write16(_adapter *adapter, u32 addr, u16 val, const char *caller, const int line)
++{
++	if (match_write_sniff_ranges(addr, 2))
++		DBG_871X("DBG_IO %s:%d rtw_write16(0x%04x, 0x%04x)\n", caller, line, addr, val);
++	
++	return _rtw_write16(adapter, addr, val);
++}
++int dbg_rtw_write32(_adapter *adapter, u32 addr, u32 val, const char *caller, const int line)
++{
++	if (match_write_sniff_ranges(addr, 4))
++		DBG_871X("DBG_IO %s:%d rtw_write32(0x%04x, 0x%08x)\n", caller, line, addr, val);
++	
++	return _rtw_write32(adapter, addr, val);
++}
++int dbg_rtw_writeN(_adapter *adapter, u32 addr ,u32 length , u8 *data, const char *caller, const int line)
++{
++	if (match_write_sniff_ranges(addr, length))
++		DBG_871X("DBG_IO %s:%d rtw_writeN(0x%04x, %u)\n", caller, line, addr, length);
++
++	return _rtw_writeN(adapter, addr, length, data);
++}
++#endif
++
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_ioctl_query.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_ioctl_query.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_ioctl_query.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_ioctl_query.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,196 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _RTW_IOCTL_QUERY_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <rtw_ioctl_query.h>
++#include <wifi.h>
++
++
++#ifdef PLATFORM_WINDOWS
++//
++// Added for WPA2-PSK, by Annie, 2005-09-20.
++//
++u8
++query_802_11_capability(
++	_adapter*		Adapter,
++	u8*			pucBuf,
++	u32 *		pulOutLen
++)
++{
++	static NDIS_802_11_AUTHENTICATION_ENCRYPTION szAuthEnc[] = 
++	{
++		{Ndis802_11AuthModeOpen, Ndis802_11EncryptionDisabled}, 
++		{Ndis802_11AuthModeOpen, Ndis802_11Encryption1Enabled},
++		{Ndis802_11AuthModeShared, Ndis802_11EncryptionDisabled}, 
++		{Ndis802_11AuthModeShared, Ndis802_11Encryption1Enabled},
++		{Ndis802_11AuthModeWPA, Ndis802_11Encryption2Enabled}, 
++		{Ndis802_11AuthModeWPA, Ndis802_11Encryption3Enabled},
++		{Ndis802_11AuthModeWPAPSK, Ndis802_11Encryption2Enabled}, 
++		{Ndis802_11AuthModeWPAPSK, Ndis802_11Encryption3Enabled},
++		{Ndis802_11AuthModeWPANone, Ndis802_11Encryption2Enabled}, 
++		{Ndis802_11AuthModeWPANone, Ndis802_11Encryption3Enabled},
++		{Ndis802_11AuthModeWPA2, Ndis802_11Encryption2Enabled}, 
++		{Ndis802_11AuthModeWPA2, Ndis802_11Encryption3Enabled},
++		{Ndis802_11AuthModeWPA2PSK, Ndis802_11Encryption2Enabled}, 
++		{Ndis802_11AuthModeWPA2PSK, Ndis802_11Encryption3Enabled}
++	};	
++	static ULONG	ulNumOfPairSupported = sizeof(szAuthEnc)/sizeof(NDIS_802_11_AUTHENTICATION_ENCRYPTION);
++	NDIS_802_11_CAPABILITY * pCap = (NDIS_802_11_CAPABILITY *)pucBuf;
++	u8*	pucAuthEncryptionSupported = (u8*) pCap->AuthenticationEncryptionSupported;
++
++
++	pCap->Length = sizeof(NDIS_802_11_CAPABILITY);
++	if(ulNumOfPairSupported > 1 )
++		pCap->Length += 	(ulNumOfPairSupported-1) * sizeof(NDIS_802_11_AUTHENTICATION_ENCRYPTION);
++	
++	pCap->Version = 2;	
++	pCap->NoOfPMKIDs = NUM_PMKID_CACHE;	
++	pCap->NoOfAuthEncryptPairsSupported = ulNumOfPairSupported;
++
++	if( sizeof (szAuthEnc) <= 240 )		// 240 = 256 - 4*4	// SecurityInfo.szCapability: only 256 bytes in size.
++	{
++		_rtw_memcpy( pucAuthEncryptionSupported, (u8*)szAuthEnc,  sizeof (szAuthEnc) );
++		*pulOutLen = pCap->Length;
++		return _TRUE;
++	}
++	else
++	{
++		*pulOutLen = 0;
++		RT_TRACE(_module_rtl871x_ioctl_query_c_,_drv_info_,("_query_802_11_capability(): szAuthEnc size is too large.\n"));
++		return _FALSE;
++	}
++}
++
++u8 query_802_11_association_information(	_adapter *padapter,PNDIS_802_11_ASSOCIATION_INFORMATION	pAssocInfo)
++{
++	struct wlan_network *tgt_network;
++	struct	mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
++	struct	security_priv  *psecuritypriv=&(padapter->securitypriv);
++	WLAN_BSSID_EX	*psecnetwork=(WLAN_BSSID_EX*)&(psecuritypriv->sec_bss);					
++	u8 *	pDest = (u8 *)pAssocInfo + sizeof(NDIS_802_11_ASSOCIATION_INFORMATION);
++	unsigned char i,*auth_ie,*supp_ie;
++
++	//NdisZeroMemory(pAssocInfo, sizeof(NDIS_802_11_ASSOCIATION_INFORMATION));
++	_rtw_memset(pAssocInfo, 0, sizeof(NDIS_802_11_ASSOCIATION_INFORMATION));
++	//pAssocInfo->Length = sizeof(NDIS_802_11_ASSOCIATION_INFORMATION);
++
++	//------------------------------------------------------
++	// Association Request related information
++	//------------------------------------------------------
++	// Req_1. AvailableRequestFixedIEs
++	if(psecnetwork!=NULL){
++		
++	pAssocInfo->AvailableRequestFixedIEs |= NDIS_802_11_AI_REQFI_CAPABILITIES|NDIS_802_11_AI_REQFI_CURRENTAPADDRESS;
++	pAssocInfo->RequestFixedIEs.Capabilities = (unsigned short)* & psecnetwork->IEs[10];
++	_rtw_memcpy(pAssocInfo->RequestFixedIEs.CurrentAPAddress,
++		& psecnetwork->MacAddress, 6);
++
++	pAssocInfo->OffsetRequestIEs = sizeof(NDIS_802_11_ASSOCIATION_INFORMATION);
++
++	if(check_fwstate( pmlmepriv, _FW_UNDER_LINKING|_FW_LINKED)==_TRUE)
++	{
++		
++		if(psecuritypriv->ndisauthtype>=Ndis802_11AuthModeWPA2)
++			pDest[0] =48;		//RSN Information Element
++		else 
++			pDest[0] =221;	//WPA(SSN) Information Element
++		
++		RT_TRACE(_module_rtl871x_ioctl_query_c_,_drv_info_,("\n Adapter->ndisauthtype==Ndis802_11AuthModeWPA)?0xdd:0x30 [%d]",pDest[0]));
++		supp_ie=&psecuritypriv->supplicant_ie[0];
++		for(i=0;i<supp_ie[0];i++)
++		{
++			RT_TRACE(_module_rtl871x_ioctl_query_c_,_drv_info_,("IEs [%d] = 0x%x \n\n", i,supp_ie[i]));
++		}
++
++		i=13;	//0~11 is fixed information element		
++		RT_TRACE(_module_rtl871x_ioctl_query_c_,_drv_info_,("i= %d tgt_network->network.IELength=%d\n\n", i,(int)psecnetwork->IELength));
++		while((i<supp_ie[0]) && (i<256)){
++			if((unsigned char)supp_ie[i]==pDest[0]){
++						_rtw_memcpy((u8 *)(pDest),
++							&supp_ie[i], 
++							supp_ie[1+i]+2);
++			
++				break;
++			}
++			
++			i=i+supp_ie[i+1]+2;
++			if(supp_ie[1+i]==0)
++				i=i+1;
++			RT_TRACE(_module_rtl871x_ioctl_query_c_,_drv_info_,("iteration i=%d IEs [%d] = 0x%x \n\n", i,i,supp_ie[i+1]));
++			
++		}
++		
++
++		pAssocInfo->RequestIELength += (2 + supp_ie[1+i]);// (2 + psecnetwork->IEs[1+i]+4);
++
++	}
++	
++
++		RT_TRACE(_module_rtl871x_ioctl_query_c_,_drv_info_,("\n psecnetwork != NULL,fwstate==_FW_UNDER_LINKING \n"));
++
++	}
++	
++
++	//------------------------------------------------------
++	// Association Response related information
++	//------------------------------------------------------
++
++	if(check_fwstate( pmlmepriv, _FW_LINKED)==_TRUE)
++	{
++		tgt_network =&(pmlmepriv->cur_network);
++		if(tgt_network!=NULL){
++		pAssocInfo->AvailableResponseFixedIEs =
++				NDIS_802_11_AI_RESFI_CAPABILITIES
++				|NDIS_802_11_AI_RESFI_ASSOCIATIONID
++				;
++
++		pAssocInfo->ResponseFixedIEs.Capabilities =(unsigned short)* & tgt_network->network.IEs[10];
++		pAssocInfo->ResponseFixedIEs.StatusCode = 0;
++		pAssocInfo->ResponseFixedIEs.AssociationId =(unsigned short) tgt_network->aid;
++
++		pDest = (u8 *)pAssocInfo + sizeof(NDIS_802_11_ASSOCIATION_INFORMATION)+pAssocInfo->RequestIELength;
++		auth_ie=&psecuritypriv->authenticator_ie[0];
++
++		for(i=0;i<auth_ie[0];i++)
++			RT_TRACE(_module_rtl871x_ioctl_query_c_,_drv_info_,("IEs [%d] = 0x%x \n\n", i,auth_ie[i]));
++
++		i=auth_ie[0]-12;
++		if(i>0){
++			_rtw_memcpy((u8 *)&pDest[0],&auth_ie[1],i);
++			pAssocInfo->ResponseIELength =i; 
++		}
++
++
++		pAssocInfo->OffsetResponseIEs = sizeof(NDIS_802_11_ASSOCIATION_INFORMATION) + pAssocInfo->RequestIELength;  
++
++
++		RT_TRACE(_module_rtl871x_ioctl_query_c_,_drv_info_,("\n tgt_network != NULL,fwstate==_FW_LINKED \n"));
++		}
++	}												  	
++	RT_TRACE(_module_rtl871x_ioctl_query_c_,_drv_info_,("\n exit query_802_11_association_information \n"));
++_func_exit_;
++
++	return _TRUE;
++}
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_ioctl_rtl.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_ioctl_rtl.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_ioctl_rtl.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_ioctl_rtl.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,1031 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define  _RTW_IOCTL_RTL_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <wlan_bssdef.h>
++#include <wifi.h>
++#include <rtw_ioctl.h>
++#include <rtw_ioctl_set.h>
++#include <rtw_ioctl_query.h>
++#include <rtw_ioctl_rtl.h>
++#include <mp_custom_oid.h>
++#ifdef CONFIG_MP_INCLUDED
++#include <rtw_mp.h>
++#include <rtw_mp_ioctl.h>
++#endif
++
++struct oid_obj_priv oid_rtl_seg_01_01[] =
++{
++	{1, &oid_null_function},										//0x80
++	{1, &oid_null_function},										//0x81
++	{1, &oid_null_function},										//0x82
++	{1, &oid_null_function},										//0x83//OID_RT_SET_SNIFFER_MODE
++	{1, &oid_rt_get_signal_quality_hdl},							//0x84
++	{1, &oid_rt_get_small_packet_crc_hdl},						//0x85
++	{1, &oid_rt_get_middle_packet_crc_hdl},						//0x86
++	{1, &oid_rt_get_large_packet_crc_hdl},						//0x87
++	{1, &oid_rt_get_tx_retry_hdl},								//0x88
++	{1, &oid_rt_get_rx_retry_hdl},								//0x89
++	{1, &oid_rt_pro_set_fw_dig_state_hdl},						//0x8A
++	{1, &oid_rt_pro_set_fw_ra_state_hdl}	,						//0x8B
++	{1, &oid_null_function},										//0x8C
++	{1, &oid_null_function},										//0x8D
++	{1, &oid_null_function},										//0x8E
++	{1, &oid_null_function},										//0x8F
++	{1, &oid_rt_get_rx_total_packet_hdl},							//0x90
++	{1, &oid_rt_get_tx_beacon_ok_hdl},							//0x91
++	{1, &oid_rt_get_tx_beacon_err_hdl},							//0x92
++	{1, &oid_rt_get_rx_icv_err_hdl},								//0x93
++	{1, &oid_rt_set_encryption_algorithm_hdl},					//0x94
++	{1, &oid_null_function},										//0x95
++	{1, &oid_rt_get_preamble_mode_hdl},							//0x96
++	{1, &oid_null_function},										//0x97
++	{1, &oid_rt_get_ap_ip_hdl},									//0x98
++	{1, &oid_rt_get_channelplan_hdl},							//0x99	
++	{1, &oid_rt_set_preamble_mode_hdl},	 						//0x9A
++	{1, &oid_rt_set_bcn_intvl_hdl},								//0x9B
++	{1, &oid_null_function},										//0x9C
++	{1, &oid_rt_dedicate_probe_hdl},								//0x9D
++	{1, &oid_null_function},										//0x9E
++	{1, &oid_null_function},										//0x9F
++	{1, &oid_null_function},										//0xA0
++	{1, &oid_null_function},										//0xA1
++	{1, &oid_null_function},										//0xA2
++	{1, &oid_null_function},										//0xA3
++	{1, &oid_null_function},										//0xA4
++	{1, &oid_null_function},										//0xA5
++	{1, &oid_null_function},										//0xA6
++	{1, &oid_rt_get_total_tx_bytes_hdl},							//0xA7
++	{1, &oid_rt_get_total_rx_bytes_hdl},							//0xA8
++	{1, &oid_rt_current_tx_power_level_hdl},						//0xA9	
++	{1, &oid_rt_get_enc_key_mismatch_count_hdl},	 			//0xAA
++	{1, &oid_rt_get_enc_key_match_count_hdl},					//0xAB
++	{1, &oid_rt_get_channel_hdl},								//0xAC
++	{1, &oid_rt_set_channelplan_hdl},								//0xAD
++	{1, &oid_rt_get_hardware_radio_off_hdl},						//0xAE
++	{1, &oid_null_function},										//0xAF
++	{1, &oid_null_function},										//0xB0
++	{1, &oid_null_function},										//0xB1
++	{1, &oid_null_function},										//0xB2
++	{1, &oid_null_function},										//0xB3
++	{1, &oid_rt_get_key_mismatch_hdl},							//0xB4
++	{1, &oid_null_function},										//0xB5
++	{1, &oid_null_function},										//0xB6
++	{1, &oid_null_function},										//0xB7
++	{1, &oid_null_function},										//0xB8
++	{1, &oid_null_function},										//0xB9	
++	{1, &oid_null_function},	 									//0xBA
++	{1, &oid_rt_supported_wireless_mode_hdl},					//0xBB
++	{1, &oid_rt_get_channel_list_hdl},							//0xBC
++	{1, &oid_rt_get_scan_in_progress_hdl},						//0xBD
++	{1, &oid_null_function},										//0xBE
++	{1, &oid_null_function},										//0xBF
++	{1, &oid_null_function},										//0xC0
++	{1, &oid_rt_forced_data_rate_hdl},							//0xC1
++	{1, &oid_rt_wireless_mode_for_scan_list_hdl},					//0xC2
++	{1, &oid_rt_get_bss_wireless_mode_hdl},						//0xC3
++	{1, &oid_rt_scan_with_magic_packet_hdl},					//0xC4
++	{1, &oid_null_function},										//0xC5
++	{1, &oid_null_function},										//0xC6
++	{1, &oid_null_function},										//0xC7
++	{1, &oid_null_function},										//0xC8
++	{1, &oid_null_function},										//0xC9	
++	{1, &oid_null_function},	 									//0xCA
++	{1, &oid_null_function},										//0xCB
++	{1, &oid_null_function},										//0xCC
++	{1, &oid_null_function},										//0xCD
++	{1, &oid_null_function},										//0xCE
++	{1, &oid_null_function},										//0xCF
++	
++};
++
++struct oid_obj_priv oid_rtl_seg_01_03[] =
++{
++	{1, &oid_rt_ap_get_associated_station_list_hdl},				//0x00
++	{1, &oid_null_function},										//0x01
++	{1, &oid_rt_ap_switch_into_ap_mode_hdl},					//0x02
++	{1, &oid_null_function},										//0x03
++	{1, &oid_rt_ap_supported_hdl},								//0x04
++	{1, &oid_rt_ap_set_passphrase_hdl},							//0x05
++
++};
++
++struct oid_obj_priv oid_rtl_seg_01_11[] =
++{
++	{1, &oid_null_function},					//0xC0	OID_RT_PRO_RX_FILTER	
++	{1, &oid_null_function},					//0xC1	OID_CE_USB_WRITE_REGISTRY
++	{1, &oid_null_function},					//0xC2	OID_CE_USB_READ_REGISTRY
++	{1, &oid_null_function},					//0xC3	OID_RT_PRO_SET_INITIAL_GAIN
++	{1, &oid_null_function},					//0xC4	OID_RT_PRO_SET_BB_RF_STANDBY_MODE
++	{1, &oid_null_function},					//0xC5	OID_RT_PRO_SET_BB_RF_SHUTDOWN_MODE
++	{1, &oid_null_function},					//0xC6	OID_RT_PRO_SET_TX_CHARGE_PUMP
++	{1, &oid_null_function},					//0xC7	OID_RT_PRO_SET_RX_CHARGE_PUMP
++	{1, &oid_rt_pro_rf_write_registry_hdl},	//0xC8	
++	{1, &oid_rt_pro_rf_read_registry_hdl},	//0xC9	
++	{1, &oid_null_function}					//0xCA	OID_RT_PRO_QUERY_RF_TYPE
++	
++};
++
++struct oid_obj_priv oid_rtl_seg_03_00[] =
++{
++	{1, &oid_null_function},										//0x00
++	{1, &oid_rt_get_connect_state_hdl},							//0x01
++	{1, &oid_null_function},										//0x02
++	{1, &oid_null_function},										//0x03
++	{1, &oid_rt_set_default_key_id_hdl},							//0x04
++
++	
++};
++
++
++//**************  oid_rtl_seg_01_01 section start ************** 
++
++NDIS_STATUS oid_rt_pro_set_fw_dig_state_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS		status = NDIS_STATUS_SUCCESS;
++#if 0
++	PADAPTER		Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++	_irqL			oldirql;
++	
++	_func_enter_;
++	
++	if(poid_par_priv->type_of_oid != SET_OID) 
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}
++			
++	_irqlevel_changed_(&oldirql,LOWER);
++	if(poid_par_priv->information_buf_len >= sizeof(struct setdig_parm))
++	{
++		//DEBUG_ERR(("===> oid_rt_pro_set_fw_dig_state_hdl. type:0x%02x.\n",*((unsigned char*)poid_par_priv->information_buf )));	
++		if(!rtw_setfwdig_cmd(Adapter,*((unsigned char*)poid_par_priv->information_buf )))			
++		{
++			status = NDIS_STATUS_NOT_ACCEPTED;
++		}
++		                   
++	}
++	else{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++	}  
++	_irqlevel_changed_(&oldirql,RAISE);
++	_func_exit_;
++#endif
++	return status;
++}
++//-----------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_set_fw_ra_state_hdl(struct oid_par_priv* poid_par_priv)
++{
++
++	NDIS_STATUS		status = NDIS_STATUS_SUCCESS;
++#if 0
++	PADAPTER		Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++	_irqL			oldirql;
++	
++	_func_enter_;	
++	if(poid_par_priv->type_of_oid != SET_OID) 
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}
++
++					
++	_irqlevel_changed_(&oldirql,LOWER);
++	
++	if(poid_par_priv->information_buf_len >= sizeof(struct setra_parm))
++	{
++		//DEBUG_ERR(("===> oid_rt_pro_set_fw_ra_state_hdl. type:0x%02x.\n",*((unsigned char*)poid_par_priv->information_buf )));	
++		if(!rtw_setfwra_cmd(Adapter,*((unsigned char*)poid_par_priv->information_buf )))			
++		{
++			status = NDIS_STATUS_NOT_ACCEPTED;
++		}
++		                   
++	}
++	else{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++	}  
++	_irqlevel_changed_(&oldirql,RAISE);
++	_func_exit_;
++#endif
++	return status;
++}
++//-----------------------------------------------------------------------------
++NDIS_STATUS oid_rt_get_signal_quality_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	//DEBUG_ERR(("<**********************oid_rt_get_signal_quality_hdl \n"));
++	if(poid_par_priv->type_of_oid != QUERY_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}		
++
++#if 0
++		if(pMgntInfo->mAssoc || pMgntInfo->mIbss)
++		{
++			ulInfo = pAdapter->RxStats.SignalQuality;
++			*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++		}
++		else
++		{
++			ulInfo = 0xffffffff; // It stands for -1 in 4-byte integer.
++		}
++		break;
++#endif
++
++	return status;
++}
++
++//------------------------------------------------------------------------------
++
++NDIS_STATUS oid_rt_get_small_packet_crc_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	if(poid_par_priv->type_of_oid != QUERY_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}		
++		
++	if(poid_par_priv->information_buf_len >=  sizeof(ULONG) )
++	{		
++		*(ULONG *)poid_par_priv->information_buf = padapter->recvpriv.rx_smallpacket_crcerr;
++		*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;		
++	}
++	else
++	{
++		status = NDIS_STATUS_INVALID_LENGTH;
++	}
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_get_middle_packet_crc_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	if(poid_par_priv->type_of_oid != QUERY_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}		
++
++	if(poid_par_priv->information_buf_len >=  sizeof(ULONG) )
++	{		
++		*(ULONG *)poid_par_priv->information_buf = padapter->recvpriv.rx_middlepacket_crcerr;
++		*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;		
++	}
++	else
++	{
++		status = NDIS_STATUS_INVALID_LENGTH;
++	}
++
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_get_large_packet_crc_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	if(poid_par_priv->type_of_oid != QUERY_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}	
++
++	if(poid_par_priv->information_buf_len >=  sizeof(ULONG) )
++	{		
++		*(ULONG *)poid_par_priv->information_buf = padapter->recvpriv.rx_largepacket_crcerr;
++		*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;		
++	}
++	else
++	{
++		status = NDIS_STATUS_INVALID_LENGTH;
++	}
++
++
++	return status;
++}
++
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_get_tx_retry_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	if(poid_par_priv->type_of_oid != QUERY_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}		
++
++	return status;
++}
++NDIS_STATUS oid_rt_get_rx_retry_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	if(poid_par_priv->type_of_oid != QUERY_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}		
++	*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_get_rx_total_packet_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS		status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	if(poid_par_priv->type_of_oid != QUERY_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}	
++	if(poid_par_priv->information_buf_len >=  sizeof(ULONG) )
++	{		
++		*(u64 *)poid_par_priv->information_buf = padapter->recvpriv.rx_pkts + padapter->recvpriv.rx_drop;
++		*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;		
++	}
++	else
++	{
++		status = NDIS_STATUS_INVALID_LENGTH;
++	}
++
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_get_tx_beacon_ok_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	if(poid_par_priv->type_of_oid != QUERY_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}		
++
++	return status;
++}
++NDIS_STATUS oid_rt_get_tx_beacon_err_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	if(poid_par_priv->type_of_oid != QUERY_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}		
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_get_rx_icv_err_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	if(poid_par_priv->type_of_oid != QUERY_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}
++	if(poid_par_priv->information_buf_len>= sizeof(u32))
++	{
++		//_rtw_memcpy(*(uint *)poid_par_priv->information_buf,padapter->recvpriv.rx_icv_err,sizeof(u32));
++		*(uint *)poid_par_priv->information_buf = padapter->recvpriv.rx_icv_err;
++		*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++	}
++	else
++	{
++		status = NDIS_STATUS_INVALID_LENGTH ;
++	}
++	
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_set_encryption_algorithm_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	if(poid_par_priv->type_of_oid != SET_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}	
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_get_preamble_mode_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++	ULONG			preamblemode = 0 ;			
++		
++	if(poid_par_priv->type_of_oid != QUERY_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}		
++	if(poid_par_priv->information_buf_len>= sizeof(ULONG))
++	{		
++		if(padapter->registrypriv.preamble == PREAMBLE_LONG)
++			preamblemode = 0;
++		else if (padapter->registrypriv.preamble == PREAMBLE_AUTO)
++			preamblemode = 1;
++		else if (padapter->registrypriv.preamble == PREAMBLE_SHORT)
++			preamblemode = 2;
++		
++			
++		*(ULONG *)poid_par_priv->information_buf = preamblemode ;
++		*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++	}
++	else
++	{
++		status = NDIS_STATUS_INVALID_LENGTH ;
++	}
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_get_ap_ip_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	if(poid_par_priv->type_of_oid != QUERY_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}		
++
++	return status;
++}
++
++NDIS_STATUS oid_rt_get_channelplan_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++	struct eeprom_priv*	peeprompriv = &padapter->eeprompriv;	
++
++	if(poid_par_priv->type_of_oid != QUERY_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}		
++	*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++	*(u16 *)poid_par_priv->information_buf = peeprompriv->channel_plan ;
++
++	return status;
++}
++NDIS_STATUS oid_rt_set_channelplan_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++	struct eeprom_priv*	peeprompriv = &padapter->eeprompriv;	
++	
++	if(poid_par_priv->type_of_oid != SET_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}		
++	
++	peeprompriv->channel_plan = *(u16 *)poid_par_priv->information_buf ;
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_set_preamble_mode_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++	ULONG			preamblemode = 0;
++	if(poid_par_priv->type_of_oid != SET_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}
++	 
++	if(poid_par_priv->information_buf_len>= sizeof(ULONG))
++	{		
++		preamblemode = *(ULONG *)poid_par_priv->information_buf ;
++		if( preamblemode == 0)
++			padapter->registrypriv.preamble = PREAMBLE_LONG;
++		else if (preamblemode==1 )
++			padapter->registrypriv.preamble = PREAMBLE_AUTO;
++		else if ( preamblemode==2 )
++			padapter->registrypriv.preamble = PREAMBLE_SHORT;		
++			
++		*(ULONG *)poid_par_priv->information_buf = preamblemode ;
++		*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++	}
++	else
++	{
++		status = NDIS_STATUS_INVALID_LENGTH ;
++	}	
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_set_bcn_intvl_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	if(poid_par_priv->type_of_oid != SET_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}
++
++	return status;
++}
++NDIS_STATUS oid_rt_dedicate_probe_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_get_total_tx_bytes_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	if(poid_par_priv->type_of_oid != QUERY_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}	
++	if(poid_par_priv->information_buf_len>= sizeof(ULONG))
++	{		
++		*(u64 *)poid_par_priv->information_buf = padapter->xmitpriv.tx_bytes;
++		*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++	}
++	else
++	{
++		status = NDIS_STATUS_INVALID_LENGTH ;
++	}
++	
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_get_total_rx_bytes_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS		status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	if(poid_par_priv->type_of_oid != QUERY_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}
++	if(poid_par_priv->information_buf_len>= sizeof(ULONG))
++	{
++		//_rtw_memcpy(*(uint *)poid_par_priv->information_buf,padapter->recvpriv.rx_icv_err,sizeof(u32));
++		*(u64 *)poid_par_priv->information_buf = padapter->recvpriv.rx_bytes;
++		*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++	}
++	else
++	{
++		status = NDIS_STATUS_INVALID_LENGTH ;
++	}
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_current_tx_power_level_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	return status;
++}
++NDIS_STATUS oid_rt_get_enc_key_mismatch_count_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	if(poid_par_priv->type_of_oid != QUERY_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}		
++
++	return status;
++}
++NDIS_STATUS oid_rt_get_enc_key_match_count_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	if(poid_par_priv->type_of_oid != QUERY_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}		
++
++	return status;
++}
++NDIS_STATUS oid_rt_get_channel_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++	struct	mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	NDIS_802_11_CONFIGURATION		*pnic_Config;
++
++	ULONG   channelnum;
++
++	_func_enter_;
++	if(poid_par_priv->type_of_oid != QUERY_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}		
++
++	if ( (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) ||
++		(check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE))
++		pnic_Config = &pmlmepriv->cur_network.network.Configuration;
++	else
++		pnic_Config = &padapter->registrypriv.dev_network.Configuration;
++
++	channelnum = pnic_Config->DSConfig;
++	*(ULONG *)poid_par_priv->information_buf = channelnum;
++	
++	*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++
++	_func_exit_;
++
++
++
++	return status;
++}
++NDIS_STATUS oid_rt_get_hardware_radio_off_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	if(poid_par_priv->type_of_oid != QUERY_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}		
++
++	return status;
++}
++NDIS_STATUS oid_rt_get_key_mismatch_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	if(poid_par_priv->type_of_oid != QUERY_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}		
++
++	return status;
++}
++NDIS_STATUS oid_rt_supported_wireless_mode_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++	ULONG 			ulInfo = 0 ;
++	//DEBUG_ERR(("<**********************oid_rt_supported_wireless_mode_hdl \n"));	
++	if(poid_par_priv->type_of_oid != QUERY_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}		
++	if(poid_par_priv->information_buf_len >= sizeof(ULONG)){
++		ulInfo |= 0x0100; //WIRELESS_MODE_B
++		ulInfo |= 0x0200; //WIRELESS_MODE_G
++		ulInfo |= 0x0400; //WIRELESS_MODE_A
++
++		*(ULONG *) poid_par_priv->information_buf = ulInfo;		
++		//DEBUG_ERR(("<===oid_rt_supported_wireless_mode %x\n",ulInfo));	
++		*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++	}
++	else{
++		status = NDIS_STATUS_INVALID_LENGTH;
++	}		
++
++	return status;
++}
++NDIS_STATUS oid_rt_get_channel_list_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	if(poid_par_priv->type_of_oid != QUERY_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}		
++
++	return status;
++}
++NDIS_STATUS oid_rt_get_scan_in_progress_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	if(poid_par_priv->type_of_oid != QUERY_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}		
++
++	return status;
++}
++
++
++NDIS_STATUS oid_rt_forced_data_rate_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	return status;
++}
++NDIS_STATUS oid_rt_wireless_mode_for_scan_list_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	return status;
++}
++NDIS_STATUS oid_rt_get_bss_wireless_mode_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	if(poid_par_priv->type_of_oid != QUERY_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}		
++
++	return status;
++}
++
++NDIS_STATUS oid_rt_scan_with_magic_packet_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	return status;
++}
++//**************  oid_rtl_seg_01_01 section end ************** 
++
++//**************  oid_rtl_seg_01_03 section start ************** 
++NDIS_STATUS oid_rt_ap_get_associated_station_list_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	if(poid_par_priv->type_of_oid != QUERY_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}		
++
++	return status;
++}
++NDIS_STATUS oid_rt_ap_switch_into_ap_mode_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	return status;
++}
++NDIS_STATUS oid_rt_ap_supported_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	return status;
++}
++NDIS_STATUS oid_rt_ap_set_passphrase_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	if(poid_par_priv->type_of_oid != SET_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}		
++
++	return status;
++}
++
++//**************  oid_rtl_seg_01_03 section end ************** 
++
++//****************  oid_rtl_seg_01_11   section start ****************
++NDIS_STATUS oid_rt_pro_rf_write_registry_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS		status = NDIS_STATUS_SUCCESS;
++	PADAPTER		Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++	_irqL			oldirql;
++	_func_enter_;
++	//DEBUG_ERR(("<**********************oid_rt_pro_rf_write_registry_hdl \n"));
++	if(poid_par_priv->type_of_oid != SET_OID) //QUERY_OID
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}
++	
++	_irqlevel_changed_(&oldirql,LOWER);
++	if(poid_par_priv->information_buf_len== (sizeof(unsigned long)*3))
++	{      
++		//RegOffsetValue	- The offset of RF register to write.
++		//RegDataWidth	- The data width of RF register to write.
++		//RegDataValue	- The value to write. 
++		//RegOffsetValue = *((unsigned long*)InformationBuffer);
++		//RegDataWidth = *((unsigned long*)InformationBuffer+1);	   
++		//RegDataValue =  *((unsigned long*)InformationBuffer+2);	
++		if(!rtw_setrfreg_cmd(Adapter, 
++						*(unsigned char*)poid_par_priv->information_buf, 
++						(unsigned long)(*((unsigned long*)poid_par_priv->information_buf+2))))
++		{
++			status = NDIS_STATUS_NOT_ACCEPTED;
++		}
++	                   
++	}
++	else{
++		status = NDIS_STATUS_INVALID_LENGTH;
++	}   
++	_irqlevel_changed_(&oldirql,RAISE);
++	_func_exit_;
++
++	return status;
++}
++
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_rf_read_registry_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS		status = NDIS_STATUS_SUCCESS;
++#if 0
++	PADAPTER		Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++	_irqL	oldirql;
++	_func_enter_;
++
++	//DEBUG_ERR(("<**********************oid_rt_pro_rf_read_registry_hdl \n"));
++	if(poid_par_priv->type_of_oid != SET_OID) //QUERY_OID
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}	
++	
++	_irqlevel_changed_(&oldirql,LOWER);
++	if(poid_par_priv->information_buf_len== (sizeof(unsigned long)*3))
++	{
++		if(Adapter->mppriv.act_in_progress == _TRUE)
++		{
++			status = NDIS_STATUS_NOT_ACCEPTED;
++		}
++		else
++		{
++			//init workparam
++			Adapter->mppriv.act_in_progress = _TRUE;
++			Adapter->mppriv.workparam.bcompleted= _FALSE;
++			Adapter->mppriv.workparam.act_type = MPT_READ_RF;
++			Adapter->mppriv.workparam.io_offset = *(unsigned long*)poid_par_priv->information_buf;		
++			Adapter->mppriv.workparam.io_value = 0xcccccccc;
++				       
++			//RegOffsetValue	- The offset of RF register to read.
++			//RegDataWidth	- The data width of RF register to read.
++			//RegDataValue	- The value to read. 
++			//RegOffsetValue = *((unsigned long*)InformationBuffer);
++			//RegDataWidth = *((unsigned long*)InformationBuffer+1);	   
++			//RegDataValue =  *((unsigned long*)InformationBuffer+2);	   	 	                   
++			if(!rtw_getrfreg_cmd(Adapter, 
++							*(unsigned char*)poid_par_priv->information_buf, 
++							(unsigned char*)&Adapter->mppriv.workparam.io_value))
++			{
++				status = NDIS_STATUS_NOT_ACCEPTED;
++			}
++		}
++				      		   
++		                   
++	}
++	else	{
++		status = NDIS_STATUS_INVALID_LENGTH;
++	}
++	_irqlevel_changed_(&oldirql,RAISE);
++	_func_exit_;
++#endif
++	return status;
++}
++
++//****************  oid_rtl_seg_01_11   section end****************	
++
++
++//**************  oid_rtl_seg_03_00 section start **************  
++enum _CONNECT_STATE_{
++	CHECKINGSTATUS,
++	ASSOCIATED,
++	ADHOCMODE,
++	NOTASSOCIATED
++};
++
++NDIS_STATUS oid_rt_get_connect_state_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS		status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	struct mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
++
++	ULONG ulInfo;
++		
++	if(poid_par_priv->type_of_oid != QUERY_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}		
++
++	// nStatus==0	CheckingStatus
++	// nStatus==1	Associated
++	// nStatus==2	AdHocMode
++	// nStatus==3	NotAssociated
++	
++	if(check_fwstate(pmlmepriv, _FW_UNDER_LINKING) == _TRUE)
++		ulInfo = CHECKINGSTATUS;
++	else if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)	
++		ulInfo = ASSOCIATED;
++	else if(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE)== _TRUE)
++		ulInfo = ADHOCMODE;
++	else
++		ulInfo = NOTASSOCIATED ;
++
++	*(ULONG *)poid_par_priv->information_buf = ulInfo;
++	*poid_par_priv->bytes_rw =  poid_par_priv->information_buf_len;
++
++#if 0
++	// Rearrange the order to let the UI still shows connection when scan is in progress
++	RT_TRACE(COMP_OID_QUERY, DBG_LOUD, ("===> Query OID_RT_GET_CONNECT_STATE.\n"));
++	if(pMgntInfo->mAssoc)
++		ulInfo = 1;
++	else if(pMgntInfo->mIbss)
++		ulInfo = 2;
++	else if(pMgntInfo->bScanInProgress)
++		ulInfo = 0;
++	else
++		ulInfo = 3;
++	ulInfoLen = sizeof(ULONG);
++	RT_TRACE(COMP_OID_QUERY, DBG_LOUD, ("<=== Query OID_RT_GET_CONNECT_STATE: %d\n", ulInfo));
++#endif
++
++	return status;
++}
++
++NDIS_STATUS oid_rt_set_default_key_id_hdl(struct oid_par_priv* poid_par_priv)
++{
++	NDIS_STATUS	 	status = NDIS_STATUS_SUCCESS;
++	PADAPTER		padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	if(poid_par_priv->type_of_oid != SET_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}
++	
++	return status;
++}
++//**************  oid_rtl_seg_03_00 section end **************  
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_ioctl_set.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_ioctl_set.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_ioctl_set.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_ioctl_set.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,1494 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _RTW_IOCTL_SET_C_
++
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <rtw_ioctl_set.h>
++#include <hal_intf.h>
++
++#ifdef CONFIG_USB_HCI
++#include <usb_osintf.h>
++#include <usb_ops.h>
++#endif
++#ifdef CONFIG_SDIO_HCI
++#include <sdio_osintf.h>
++#endif
++
++extern void indicate_wx_scan_complete_event(_adapter *padapter);
++
++#define IS_MAC_ADDRESS_BROADCAST(addr) \
++( \
++	( (addr[0] == 0xff) && (addr[1] == 0xff) && \
++		(addr[2] == 0xff) && (addr[3] == 0xff) && \
++		(addr[4] == 0xff) && (addr[5] == 0xff) )  ? _TRUE : _FALSE \
++)
++
++u8 rtw_validate_bssid(u8 *bssid)
++{
++	u8 ret = _TRUE;
++
++	if (is_zero_mac_addr(bssid)
++		|| is_broadcast_mac_addr(bssid)
++		|| is_multicast_mac_addr(bssid)
++	) { 
++		ret = _FALSE;
++	}
++
++	return ret;
++}
++
++u8 rtw_validate_ssid(NDIS_802_11_SSID *ssid)
++{
++	u8	 i;
++	u8	ret=_TRUE;
++
++_func_enter_;	
++
++	if (ssid->SsidLength > 32) {
++		RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_err_, ("ssid length >32\n"));
++		ret= _FALSE;
++		goto exit;
++	}
++
++#ifdef CONFIG_VALIDATE_SSID
++	for(i = 0; i < ssid->SsidLength; i++)
++	{
++		//wifi, printable ascii code must be supported
++		if(!( (ssid->Ssid[i] >= 0x20) && (ssid->Ssid[i] <= 0x7e) )){
++			RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_err_, ("ssid has nonprintabl ascii\n"));
++			ret= _FALSE;
++			break;
++		}
++	}
++#endif /* CONFIG_VALIDATE_SSID */
++
++exit:	
++
++_func_exit_;
++
++	return ret;
++}
++
++u8 rtw_do_join(_adapter * padapter);
++u8 rtw_do_join(_adapter * padapter)
++{
++	_irqL	irqL;
++	_list	*plist, *phead;
++	u8* pibss = NULL;
++	struct	mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
++	_queue	*queue	= &(pmlmepriv->scanned_queue);
++	u8 ret=_SUCCESS;
++
++_func_enter_;
++
++	_enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++	phead = get_list_head(queue);
++	plist = get_next(phead);
++
++	RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("\n rtw_do_join: phead = %p; plist = %p \n\n\n", phead, plist));
++
++	pmlmepriv->cur_network.join_res = -2;
++		
++	set_fwstate(pmlmepriv, _FW_UNDER_LINKING);
++
++	pmlmepriv->pscanned = plist;
++
++	pmlmepriv->to_join = _TRUE;
++
++	if(_rtw_queue_empty(queue)== _TRUE)
++	{	
++		_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++		_clr_fwstate_(pmlmepriv, _FW_UNDER_LINKING);
++            		
++		//when set_ssid/set_bssid for rtw_do_join(), but scanning queue is empty
++		//we try to issue sitesurvey firstly	
++            		
++		if (pmlmepriv->LinkDetectInfo.bBusyTraffic ==_FALSE
++			|| rtw_to_roaming(padapter) > 0
++		)
++		{
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("rtw_do_join(): site survey if scanned_queue is empty\n."));
++			// submit site_survey_cmd
++			if(_SUCCESS!=(ret=rtw_sitesurvey_cmd(padapter, &pmlmepriv->assoc_ssid, 1, NULL, 0)) ) {
++				RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("rtw_do_join(): site survey return error\n."));
++			}
++		}
++		
++		goto exit;
++	}	
++	else 	
++	{
++		int select_ret;
++		_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++		if((select_ret=rtw_select_and_join_from_scanned_queue(pmlmepriv))==_SUCCESS)
++		{
++			pmlmepriv->to_join = _FALSE;
++			_set_timer(&pmlmepriv->assoc_timer, MAX_JOIN_TIMEOUT);
++		}
++		else if(ret == 2)//there is no need to wait for join
++		{
++			ret = _SUCCESS;
++			_clr_fwstate_(pmlmepriv, _FW_UNDER_LINKING);
++			rtw_indicate_connect(padapter);
++		}
++		else	
++		{
++			if(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE)==_TRUE)
++			{
++				// submit createbss_cmd to change to a ADHOC_MASTER
++
++ 				//pmlmepriv->lock has been acquired by caller...
++				WLAN_BSSID_EX    *pdev_network = &(padapter->registrypriv.dev_network);
++
++				pmlmepriv->fw_state = WIFI_ADHOC_MASTER_STATE;
++				
++				pibss = padapter->registrypriv.dev_network.MacAddress;
++
++				_rtw_memset(&pdev_network->Ssid, 0, sizeof(NDIS_802_11_SSID));
++				_rtw_memcpy(&pdev_network->Ssid, &pmlmepriv->assoc_ssid, sizeof(NDIS_802_11_SSID));
++	
++				rtw_update_registrypriv_dev_network(padapter);
++
++				rtw_generate_random_ibss(pibss);
++					
++				if(rtw_createbss_cmd(padapter)!=_SUCCESS)
++				{
++					RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("***Error=>do_goin: rtw_createbss_cmd status FAIL*** \n "));						
++					ret =  _FALSE;
++					goto exit;
++				}
++
++			     	pmlmepriv->to_join = _FALSE;
++
++				RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("***Error=> rtw_select_and_join_from_scanned_queue FAIL under STA_Mode*** \n "));						
++
++			}			
++			else
++			{ 
++				// can't associate ; reset under-linking			
++				_clr_fwstate_(pmlmepriv, _FW_UNDER_LINKING);
++
++#if 0	
++				if((check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _TRUE))
++				{
++					if(_rtw_memcmp(pmlmepriv->cur_network.network.Ssid.Ssid, pmlmepriv->assoc_ssid.Ssid, pmlmepriv->assoc_ssid.SsidLength))
++					{ 
++						// for funk to do roaming
++						// funk will reconnect, but funk will not sitesurvey before reconnect
++						RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("for funk to do roaming"));
++						if(pmlmepriv->sitesurveyctrl.traffic_busy==_FALSE)
++							rtw_sitesurvey_cmd(padapter, &pmlmepriv->assoc_ssid, 1, NULL, 0);
++					}
++				
++				}				
++#endif
++
++				//when set_ssid/set_bssid for rtw_do_join(), but there are no desired bss in scanning queue
++				//we try to issue sitesurvey firstly			
++				if(pmlmepriv->LinkDetectInfo.bBusyTraffic==_FALSE
++					|| rtw_to_roaming(padapter) > 0
++				)
++				{
++					//DBG_871X("rtw_do_join() when   no desired bss in scanning queue \n");
++					if( _SUCCESS!=(ret=rtw_sitesurvey_cmd(padapter, &pmlmepriv->assoc_ssid, 1, NULL, 0)) ){
++						RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("do_join(): site survey return error\n."));
++					}
++				}				
++
++
++			}
++
++		}
++
++	}
++	
++exit:
++	
++_func_exit_;	
++
++	return ret;	
++}
++
++#ifdef PLATFORM_WINDOWS
++u8 rtw_pnp_set_power_wakeup(_adapter* padapter)
++{
++	u8 res=_SUCCESS;
++
++_func_enter_;
++
++	RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("==>rtw_pnp_set_power_wakeup!!!\n"));
++	
++	res = rtw_setstandby_cmd(padapter, 0);
++
++	RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("<==rtw_pnp_set_power_wakeup!!!\n"));
++
++_func_exit_;
++	
++	return res;
++}
++
++u8 rtw_pnp_set_power_sleep(_adapter* padapter)
++{
++	u8 res=_SUCCESS;	
++	
++_func_enter_;
++
++	RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("==>rtw_pnp_set_power_sleep!!!\n"));
++	//DbgPrint("+rtw_pnp_set_power_sleep\n");
++
++	res = rtw_setstandby_cmd(padapter, 1);
++
++	RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("<==rtw_pnp_set_power_sleep!!!\n"));
++
++_func_exit_;
++
++	return res;
++}
++
++u8 rtw_set_802_11_reload_defaults(_adapter * padapter, NDIS_802_11_RELOAD_DEFAULTS reloadDefaults)
++{
++_func_enter_;
++
++	switch( reloadDefaults)
++	{
++		case Ndis802_11ReloadWEPKeys:
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("SetInfo OID_802_11_RELOAD_DEFAULTS : Ndis802_11ReloadWEPKeys\n"));
++			break;
++	}
++
++	// SecClearAllKeys(Adapter);
++	// 8711 CAM was not for En/Decrypt only
++	// so, we can't clear all keys.
++	// should we disable WPAcfg (ox0088) bit 1-2, instead of clear all CAM
++	
++	//TO DO...
++
++_func_exit_;
++	
++	return _TRUE;
++}
++
++u8 set_802_11_test(_adapter* padapter, NDIS_802_11_TEST *test)
++{
++	u8 ret=_TRUE;
++	
++_func_enter_;
++
++	switch(test->Type)
++	{
++		case 1:
++			NdisMIndicateStatus(padapter->hndis_adapter, NDIS_STATUS_MEDIA_SPECIFIC_INDICATION, (PVOID)&test->AuthenticationEvent, test->Length - 8);
++			NdisMIndicateStatusComplete(padapter->hndis_adapter);
++			break;
++
++		case 2:
++			NdisMIndicateStatus(padapter->hndis_adapter, NDIS_STATUS_MEDIA_SPECIFIC_INDICATION, (PVOID)&test->RssiTrigger, sizeof(NDIS_802_11_RSSI));
++			NdisMIndicateStatusComplete(padapter->hndis_adapter);
++			break;
++
++		default:
++			ret=_FALSE;
++			break;
++	}
++
++_func_exit_;
++
++	return ret;	
++}
++
++u8	rtw_set_802_11_pmkid(_adapter*	padapter, NDIS_802_11_PMKID *pmkid)
++{
++	u8	ret=_SUCCESS;
++
++	return ret;
++}
++
++#endif
++
++u8 rtw_set_802_11_bssid(_adapter* padapter, u8 *bssid)
++{	
++	_irqL irqL;	
++	u8 status=_SUCCESS;
++	u32 cur_time = 0;
++
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	
++_func_enter_;
++	
++	RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_notice_,
++		 ("+rtw_set_802_11_bssid: bssid="MAC_FMT"\n", MAC_ARG(bssid) ));
++
++	if ((bssid[0]==0x00 && bssid[1]==0x00 && bssid[2]==0x00 && bssid[3]==0x00 && bssid[4]==0x00 &&bssid[5]==0x00) ||
++	    (bssid[0]==0xFF && bssid[1]==0xFF && bssid[2]==0xFF && bssid[3]==0xFF && bssid[4]==0xFF &&bssid[5]==0xFF))
++	{
++		status = _FAIL;
++		goto exit;
++	}
++		
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++
++
++	DBG_871X("Set BSSID under fw_state=0x%08x\n", get_fwstate(pmlmepriv));
++	if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) {
++		goto handle_tkip_countermeasure;
++	} else if (check_fwstate(pmlmepriv, _FW_UNDER_LINKING) == _TRUE) {
++		goto release_mlme_lock;
++	}
++
++	if (check_fwstate(pmlmepriv, _FW_LINKED|WIFI_ADHOC_MASTER_STATE) == _TRUE)
++	{
++		RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_info_, ("set_bssid: _FW_LINKED||WIFI_ADHOC_MASTER_STATE\n"));
++
++		if (_rtw_memcmp(&pmlmepriv->cur_network.network.MacAddress, bssid, ETH_ALEN) == _TRUE)
++		{		
++			if (check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _FALSE)
++				goto release_mlme_lock;//it means driver is in WIFI_ADHOC_MASTER_STATE, we needn't create bss again.
++		} else {
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("Set BSSID not the same bssid\n"));
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("set_bssid="MAC_FMT"\n", MAC_ARG(bssid) ));
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("cur_bssid="MAC_FMT"\n", MAC_ARG(pmlmepriv->cur_network.network.MacAddress) ));
++
++			rtw_disassoc_cmd(padapter, 0, _TRUE);
++
++			if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
++				rtw_indicate_disconnect(padapter);
++
++			rtw_free_assoc_resources(padapter, 1);
++
++			if ((check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE)) {
++				_clr_fwstate_(pmlmepriv, WIFI_ADHOC_MASTER_STATE);
++				set_fwstate(pmlmepriv, WIFI_ADHOC_STATE);
++			}		
++		}
++	}
++
++handle_tkip_countermeasure:
++	if (rtw_handle_tkip_countermeasure(padapter, __func__) == _FAIL) {
++		status = _FAIL;
++		goto release_mlme_lock;
++	}
++
++	_rtw_memcpy(&pmlmepriv->assoc_bssid, bssid, ETH_ALEN);
++	pmlmepriv->assoc_by_bssid=_TRUE;
++
++	if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) {
++		pmlmepriv->to_join = _TRUE;	
++	}
++	else {
++		status = rtw_do_join(padapter);
++	}
++
++release_mlme_lock:
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++		
++exit:
++	RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_err_,
++		("rtw_set_802_11_bssid: status=%d\n", status));
++	
++_func_exit_;
++
++	return status;
++}
++
++u8 rtw_set_802_11_ssid(_adapter* padapter, NDIS_802_11_SSID *ssid)
++{	
++	_irqL irqL;
++	u8 status = _SUCCESS;
++	u32 cur_time = 0;
++
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	struct wlan_network *pnetwork = &pmlmepriv->cur_network;
++	
++_func_enter_;
++	
++	RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_notice_,
++		 ("+rtw_set_802_11_ssid: ssid=[%s] fw_state=0x%08x\n",
++		  ssid->Ssid, get_fwstate(pmlmepriv)));
++
++	if(padapter->hw_init_completed==_FALSE){
++		RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_err_,
++			 ("set_ssid: hw_init_completed==_FALSE=>exit!!!\n"));
++		status = _FAIL;
++		goto exit;
++	}
++		
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++
++	DBG_871X("Set SSID under fw_state=0x%08x\n", get_fwstate(pmlmepriv));
++	if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) {	
++		goto handle_tkip_countermeasure;
++	} else if (check_fwstate(pmlmepriv, _FW_UNDER_LINKING) == _TRUE) {
++		goto release_mlme_lock;
++	}
++
++	if (check_fwstate(pmlmepriv, _FW_LINKED|WIFI_ADHOC_MASTER_STATE) == _TRUE)
++	{
++		RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_info_,
++			 ("set_ssid: _FW_LINKED||WIFI_ADHOC_MASTER_STATE\n"));
++
++		if ((pmlmepriv->assoc_ssid.SsidLength == ssid->SsidLength) &&
++		    (_rtw_memcmp(&pmlmepriv->assoc_ssid.Ssid, ssid->Ssid, ssid->SsidLength) == _TRUE))
++		{			
++			if((check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _FALSE))
++			{
++				RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_err_,
++					 ("Set SSID is the same ssid, fw_state=0x%08x\n",
++					  get_fwstate(pmlmepriv)));
++
++				if(rtw_is_same_ibss(padapter, pnetwork) == _FALSE)
++				{				
++					//if in WIFI_ADHOC_MASTER_STATE | WIFI_ADHOC_STATE, create bss or rejoin again
++					rtw_disassoc_cmd(padapter, 0, _TRUE);
++
++					if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
++						rtw_indicate_disconnect(padapter);
++						
++					rtw_free_assoc_resources(padapter, 1);
++
++					if (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE) {
++						_clr_fwstate_(pmlmepriv, WIFI_ADHOC_MASTER_STATE);
++						set_fwstate(pmlmepriv, WIFI_ADHOC_STATE);
++					}
++				}
++				else
++				{
++					goto release_mlme_lock;//it means driver is in WIFI_ADHOC_MASTER_STATE, we needn't create bss again.
++				}
++			}
++#ifdef CONFIG_LPS
++			else {
++				rtw_lps_ctrl_wk_cmd(padapter, LPS_CTRL_JOINBSS, 1);
++			}
++#endif
++		}
++		else
++		{
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("Set SSID not the same ssid\n"));
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("set_ssid=[%s] len=0x%x\n", ssid->Ssid, (unsigned int)ssid->SsidLength));
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("assoc_ssid=[%s] len=0x%x\n", pmlmepriv->assoc_ssid.Ssid, (unsigned int)pmlmepriv->assoc_ssid.SsidLength));
++
++			rtw_disassoc_cmd(padapter, 0, _TRUE);
++
++			if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
++				rtw_indicate_disconnect(padapter);
++			
++			rtw_free_assoc_resources(padapter, 1);
++
++			if (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE) {
++				_clr_fwstate_(pmlmepriv, WIFI_ADHOC_MASTER_STATE);
++				set_fwstate(pmlmepriv, WIFI_ADHOC_STATE);
++			}
++		}		
++	}
++
++handle_tkip_countermeasure:
++	if (rtw_handle_tkip_countermeasure(padapter, __func__) == _FAIL) {
++		status = _FAIL;
++		goto release_mlme_lock;
++	}
++
++	if (rtw_validate_ssid(ssid) == _FALSE) {
++		status = _FAIL;
++		goto release_mlme_lock;
++	}
++
++	_rtw_memcpy(&pmlmepriv->assoc_ssid, ssid, sizeof(NDIS_802_11_SSID));
++	pmlmepriv->assoc_by_bssid=_FALSE;
++
++	if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) {
++		pmlmepriv->to_join = _TRUE;	
++	}
++	else {
++		status = rtw_do_join(padapter);
++	}
++
++release_mlme_lock:
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++
++exit:
++	RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_err_,
++		("-rtw_set_802_11_ssid: status=%d\n", status));
++	
++_func_exit_;
++
++	return status;
++	
++}
++
++u8 rtw_set_802_11_connect(_adapter* padapter, u8 *bssid, NDIS_802_11_SSID *ssid)
++{
++	_irqL irqL;
++	u8 status = _SUCCESS;
++	u32 cur_time = 0;
++	bool bssid_valid = _TRUE;
++	bool ssid_valid = _TRUE;
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++
++_func_enter_;
++
++	if (!ssid || rtw_validate_ssid(ssid) == _FALSE)
++		ssid_valid = _FALSE;
++
++	if (!bssid || rtw_validate_bssid(bssid) == _FALSE)
++		bssid_valid = _FALSE;
++
++	if (ssid_valid == _FALSE && bssid_valid == _FALSE) {
++		DBG_871X(FUNC_ADPT_FMT" ssid:%p, ssid_valid:%d, bssid:%p, bssid_valid:%d\n",
++			FUNC_ADPT_ARG(padapter), ssid, ssid_valid, bssid, bssid_valid);
++		status = _FAIL;
++		goto exit;
++	}
++
++	if(padapter->hw_init_completed==_FALSE){
++		RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_err_,
++			 ("set_ssid: hw_init_completed==_FALSE=>exit!!!\n"));
++		status = _FAIL;
++		goto exit;
++	}
++
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++
++	LOG_LEVEL(_drv_info_, FUNC_ADPT_FMT"  fw_state=0x%08x\n",
++		FUNC_ADPT_ARG(padapter), get_fwstate(pmlmepriv));
++
++	if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) {
++		goto handle_tkip_countermeasure;
++	} else if (check_fwstate(pmlmepriv, _FW_UNDER_LINKING) == _TRUE) {
++		goto release_mlme_lock;
++	}
++
++handle_tkip_countermeasure:
++	if (rtw_handle_tkip_countermeasure(padapter, __func__) == _FAIL) {
++		status = _FAIL;
++		goto release_mlme_lock;
++	}
++
++	if (ssid && ssid_valid)
++		_rtw_memcpy(&pmlmepriv->assoc_ssid, ssid, sizeof(NDIS_802_11_SSID));
++
++	if (bssid && bssid_valid) {
++		_rtw_memcpy(&pmlmepriv->assoc_bssid, bssid, ETH_ALEN);
++		pmlmepriv->assoc_by_bssid = _TRUE;
++	}
++
++	if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) {
++		pmlmepriv->to_join = _TRUE;	
++	}
++	else {
++		status = rtw_do_join(padapter);
++	}
++
++release_mlme_lock:
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++
++exit:
++	
++_func_exit_;
++
++	return status;
++}
++
++/*
++rtw_set_802_11_infrastructure_mode(~)
++	### NOTE:#### (!!!!)
++	MUST TAKE CARE THAT BEFORE CALLING THIS FUNC, YOU SHOULD HAVE LOCKED pmlmepriv->lock and scanned_queue->lock in sequence
++*/
++u8 rtw_set_802_11_infrastructure_mode(_adapter* padapter, 
++	NDIS_802_11_NETWORK_INFRASTRUCTURE networktype)
++{
++	_irqL irqL;
++	struct	mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	struct	wlan_network	*cur_network = &pmlmepriv->cur_network;
++	NDIS_802_11_NETWORK_INFRASTRUCTURE* pold_state = &(cur_network->network.InfrastructureMode);
++	
++_func_enter_;
++
++	RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_notice_,
++		 ("+rtw_set_802_11_infrastructure_mode: old=%d new=%d fw_state=0x%08x\n",
++		  *pold_state, networktype, get_fwstate(pmlmepriv)));
++	
++	if(*pold_state != networktype)
++	{
++		
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,(" change mode!"));
++		//DBG_871X("change mode, old_mode=%d, new_mode=%d, fw_state=0x%x\n", *pold_state, networktype, get_fwstate(pmlmepriv));
++
++		if(*pold_state==Ndis802_11APMode)
++		{		
++			//change to other mode from Ndis802_11APMode			
++			cur_network->join_res = -1;
++			
++#ifdef CONFIG_NATIVEAP_MLME
++			stop_ap_mode(padapter);
++#endif
++		}	
++
++		if((check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) ||(*pold_state==Ndis802_11IBSS))
++			rtw_disassoc_cmd(padapter, 0, _TRUE);
++
++		if((check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) ||
++			(check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE)== _TRUE) )
++			rtw_free_assoc_resources(padapter, 0);
++
++		if((*pold_state == Ndis802_11Infrastructure) ||(*pold_state == Ndis802_11IBSS))
++	       {
++			if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
++			{		
++				rtw_indicate_disconnect(padapter); //will clr Linked_state; before this function, we must have chked whether  issue dis-assoc_cmd or not
++			}
++	       }
++
++		*pold_state = networktype;
++
++		_clr_fwstate_(pmlmepriv, ~WIFI_NULL_STATE);
++				
++		switch(networktype)
++		{
++			case Ndis802_11IBSS:
++				set_fwstate(pmlmepriv, WIFI_ADHOC_STATE);
++				break;
++				
++			case Ndis802_11Infrastructure:
++				set_fwstate(pmlmepriv, WIFI_STATION_STATE);
++				break;
++				
++			case Ndis802_11APMode:
++				set_fwstate(pmlmepriv, WIFI_AP_STATE);
++#ifdef CONFIG_NATIVEAP_MLME
++				start_ap_mode(padapter);
++				//rtw_indicate_connect(padapter);
++#endif				
++				
++				break;
++
++			case Ndis802_11AutoUnknown:
++			case Ndis802_11InfrastructureMax:
++				break;                        				
++		}
++
++		//SecClearAllKeys(adapter);
++		
++		//RT_TRACE(COMP_OID_SET, DBG_LOUD, ("set_infrastructure: fw_state:%x after changing mode\n",
++		//									get_fwstate(pmlmepriv) ));
++
++	}
++
++_func_exit_;
++
++	return _TRUE;
++}
++
++
++u8 rtw_set_802_11_disassociate(_adapter *padapter)
++{
++	_irqL irqL;
++	struct mlme_priv * pmlmepriv = &padapter->mlmepriv;
++
++_func_enter_;
++
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++
++	if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
++	{
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("MgntActrtw_set_802_11_disassociate: rtw_indicate_disconnect\n"));
++
++		rtw_disassoc_cmd(padapter, 0, _TRUE);
++		rtw_indicate_disconnect(padapter);
++		//modify for CONFIG_IEEE80211W, none 11w can use it
++		rtw_free_assoc_resources_cmd(padapter);
++	}
++
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++	
++_func_exit_;
++
++	return _TRUE;	
++}
++
++u8 rtw_set_802_11_bssid_list_scan(_adapter* padapter, NDIS_802_11_SSID *pssid, int ssid_max_num)
++{	
++	_irqL	irqL;
++	struct	mlme_priv		*pmlmepriv= &padapter->mlmepriv;
++	u8	res=_TRUE;
++	
++_func_enter_;
++
++	RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("+rtw_set_802_11_bssid_list_scan(), fw_state=%x\n", get_fwstate(pmlmepriv)));
++
++	if (padapter == NULL) {
++		res=_FALSE;
++		goto exit;
++	}
++	if (padapter->hw_init_completed==_FALSE){
++		res = _FALSE;
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("\n===rtw_set_802_11_bssid_list_scan:hw_init_completed==_FALSE===\n"));
++		goto exit;
++	}
++	
++	if ((check_fwstate(pmlmepriv, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == _TRUE) ||
++		(pmlmepriv->LinkDetectInfo.bBusyTraffic == _TRUE))
++	{
++		// Scan or linking is in progress, do nothing.
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("rtw_set_802_11_bssid_list_scan fail since fw_state = %x\n", get_fwstate(pmlmepriv)));
++		res = _TRUE;
++
++		if(check_fwstate(pmlmepriv, (_FW_UNDER_SURVEY|_FW_UNDER_LINKING))== _TRUE){
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("\n###_FW_UNDER_SURVEY|_FW_UNDER_LINKING\n\n"));
++		} else {
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("\n###pmlmepriv->sitesurveyctrl.traffic_busy==_TRUE\n\n"));
++		}
++	} else {		
++		if (rtw_is_scan_deny(padapter)) {
++			DBG_871X(FUNC_ADPT_FMT": scan deny\n", FUNC_ADPT_ARG(padapter));
++			indicate_wx_scan_complete_event(padapter);
++			return _SUCCESS;
++		}
++		
++		_enter_critical_bh(&pmlmepriv->lock, &irqL);		
++		
++		res = rtw_sitesurvey_cmd(padapter, pssid, ssid_max_num, NULL, 0);
++		
++		_exit_critical_bh(&pmlmepriv->lock, &irqL);
++	}
++exit:
++	
++_func_exit_;
++
++	return res;	
++}
++
++u8 rtw_set_802_11_authentication_mode(_adapter* padapter, NDIS_802_11_AUTHENTICATION_MODE authmode) 
++{
++	struct security_priv *psecuritypriv = &padapter->securitypriv;
++	int res;
++	u8 ret;
++	
++_func_enter_;
++
++	RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("set_802_11_auth.mode(): mode=%x\n", authmode));
++
++	psecuritypriv->ndisauthtype=authmode;
++	
++	RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("rtw_set_802_11_authentication_mode:psecuritypriv->ndisauthtype=%d", psecuritypriv->ndisauthtype));
++	
++	if(psecuritypriv->ndisauthtype>3)
++		psecuritypriv->dot11AuthAlgrthm=dot11AuthAlgrthm_8021X;
++	
++	res=rtw_set_auth(padapter,psecuritypriv);
++	
++	if(res==_SUCCESS)
++		ret=_TRUE;
++	else
++		ret=_FALSE;
++	
++_func_exit_;
++
++	return ret;
++}
++
++u8 rtw_set_802_11_add_wep(_adapter* padapter, NDIS_802_11_WEP *wep){
++
++	u8		bdefaultkey;
++	u8		btransmitkey;
++	sint		keyid,res;
++	struct security_priv* psecuritypriv=&(padapter->securitypriv);
++	u8		ret=_SUCCESS;
++
++_func_enter_;
++
++	bdefaultkey=(wep->KeyIndex & 0x40000000) > 0 ? _FALSE : _TRUE;   //for ???
++	btransmitkey= (wep->KeyIndex & 0x80000000) > 0 ? _TRUE  : _FALSE;	//for ???
++	keyid=wep->KeyIndex & 0x3fffffff;
++
++	if(keyid>4)
++	{
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("MgntActrtw_set_802_11_add_wep:keyid>4=>fail\n"));
++		ret=_FALSE;
++		goto exit;
++	}
++	
++	switch(wep->KeyLength)
++	{
++		case 5:
++			psecuritypriv->dot11PrivacyAlgrthm=_WEP40_;
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("MgntActrtw_set_802_11_add_wep:wep->KeyLength=5\n"));
++			break;
++		case 13:
++			psecuritypriv->dot11PrivacyAlgrthm=_WEP104_;
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("MgntActrtw_set_802_11_add_wep:wep->KeyLength=13\n"));
++			break;
++		default:
++			psecuritypriv->dot11PrivacyAlgrthm=_NO_PRIVACY_;
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("MgntActrtw_set_802_11_add_wep:wep->KeyLength!=5 or 13\n"));
++			break;
++	}
++	
++	RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("rtw_set_802_11_add_wep:befor memcpy, wep->KeyLength=0x%x wep->KeyIndex=0x%x  keyid =%x\n",wep->KeyLength,wep->KeyIndex,keyid));
++
++	_rtw_memcpy(&(psecuritypriv->dot11DefKey[keyid].skey[0]),&(wep->KeyMaterial),wep->KeyLength);
++
++	psecuritypriv->dot11DefKeylen[keyid]=wep->KeyLength;
++
++	psecuritypriv->dot11PrivacyKeyIndex=keyid;
++
++	RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("rtw_set_802_11_add_wep:security key material : %x %x %x %x %x %x %x %x %x %x %x %x %x \n",
++		psecuritypriv->dot11DefKey[keyid].skey[0],psecuritypriv->dot11DefKey[keyid].skey[1],psecuritypriv->dot11DefKey[keyid].skey[2],
++		psecuritypriv->dot11DefKey[keyid].skey[3],psecuritypriv->dot11DefKey[keyid].skey[4],psecuritypriv->dot11DefKey[keyid].skey[5],
++		psecuritypriv->dot11DefKey[keyid].skey[6],psecuritypriv->dot11DefKey[keyid].skey[7],psecuritypriv->dot11DefKey[keyid].skey[8],
++		psecuritypriv->dot11DefKey[keyid].skey[9],psecuritypriv->dot11DefKey[keyid].skey[10],psecuritypriv->dot11DefKey[keyid].skey[11],
++		psecuritypriv->dot11DefKey[keyid].skey[12]));
++
++	res=rtw_set_key(padapter,psecuritypriv, keyid, 1);
++	
++	if(res==_FAIL)
++		ret= _FALSE;
++exit:
++	
++_func_exit_;
++
++	return ret;
++	
++}
++
++u8 rtw_set_802_11_remove_wep(_adapter* padapter, u32 keyindex){
++	
++	u8 ret=_SUCCESS;
++	
++_func_enter_;
++
++	if (keyindex >= 0x80000000 || padapter == NULL){
++		
++		ret=_FALSE;
++		goto exit;
++
++	}
++	else 
++	{
++		int res;
++		struct security_priv* psecuritypriv=&(padapter->securitypriv);
++		if( keyindex < 4 ){
++			
++			_rtw_memset(&psecuritypriv->dot11DefKey[keyindex], 0, 16);
++			
++			res=rtw_set_key(padapter,psecuritypriv,keyindex, 0);
++			
++			psecuritypriv->dot11DefKeylen[keyindex]=0;
++			
++			if(res==_FAIL)
++				ret=_FAIL;
++			
++		}
++		else
++		{			
++			ret=_FAIL;
++		}
++		
++	}
++	
++exit:	
++	
++_func_exit_;
++
++	return ret;
++	
++}
++
++u8 rtw_set_802_11_add_key(_adapter* padapter, NDIS_802_11_KEY *key){
++
++	uint	encryptionalgo;
++	u8 * pbssid;
++	struct sta_info *stainfo;
++	u8	bgroup = _FALSE;
++	u8	bgrouptkey = _FALSE;//can be remove later
++	u8	ret=_SUCCESS;
++	
++_func_enter_;
++
++	if (((key->KeyIndex & 0x80000000) == 0) && ((key->KeyIndex & 0x40000000) > 0)){
++
++		// It is invalid to clear bit 31 and set bit 30. If the miniport driver encounters this combination, 
++		// it must fail the request and return NDIS_STATUS_INVALID_DATA.
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("rtw_set_802_11_add_key: ((key->KeyIndex & 0x80000000) == 0)[=%d] ",(int)(key->KeyIndex & 0x80000000) == 0));
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("rtw_set_802_11_add_key:((key->KeyIndex & 0x40000000) > 0)[=%d]" , (int)(key->KeyIndex & 0x40000000) > 0));
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("rtw_set_802_11_add_key: key->KeyIndex=%d \n" ,(int)key->KeyIndex));
++		ret= _FAIL;
++		goto exit;
++	}
++
++	if(key->KeyIndex & 0x40000000)
++	{ 
++		// Pairwise key
++
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("OID_802_11_ADD_KEY: +++++ Pairwise key +++++\n"));
++	
++		pbssid=get_bssid(&padapter->mlmepriv);
++		stainfo=rtw_get_stainfo(&padapter->stapriv, pbssid);
++
++		if((stainfo!=NULL)&&(padapter->securitypriv.dot11AuthAlgrthm==dot11AuthAlgrthm_8021X)){
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("OID_802_11_ADD_KEY:( stainfo!=NULL)&&(Adapter->securitypriv.dot11AuthAlgrthm==dot11AuthAlgrthm_8021X)\n"));
++			encryptionalgo=stainfo->dot118021XPrivacy;
++		}
++		else{
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("OID_802_11_ADD_KEY: stainfo==NULL)||(Adapter->securitypriv.dot11AuthAlgrthm!=dot11AuthAlgrthm_8021X)\n"));
++			encryptionalgo=padapter->securitypriv.dot11PrivacyAlgrthm;
++		}
++
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("rtw_set_802_11_add_key: (encryptionalgo ==%d)!\n",encryptionalgo ));
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("rtw_set_802_11_add_key: (Adapter->securitypriv.dot11PrivacyAlgrthm ==%d)!\n",padapter->securitypriv.dot11PrivacyAlgrthm));
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("rtw_set_802_11_add_key: (Adapter->securitypriv.dot11AuthAlgrthm ==%d)!\n",padapter->securitypriv.dot11AuthAlgrthm));
++
++		if((stainfo!=NULL)){
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("rtw_set_802_11_add_key: (stainfo->dot118021XPrivacy ==%d)!\n", stainfo->dot118021XPrivacy));
++		}
++		
++		if(key->KeyIndex & 0x000000FF){
++			// The key index is specified in the lower 8 bits by values of zero to 255.
++			// The key index should be set to zero for a Pairwise key, and the driver should fail with
++			// NDIS_STATUS_INVALID_DATA if the lower 8 bits is not zero
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,(" key->KeyIndex & 0x000000FF.\n"));
++			ret= _FAIL;
++			goto exit;
++		}
++
++		// check BSSID
++		if (IS_MAC_ADDRESS_BROADCAST(key->BSSID) == _TRUE){
++
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("MacAddr_isBcst(key->BSSID)\n"));
++			ret= _FALSE;
++			goto exit;
++		}
++
++		// Check key length for TKIP.
++		//if(encryptionAlgorithm == RT_ENC_TKIP_ENCRYPTION && key->KeyLength != 32)
++		if((encryptionalgo== _TKIP_)&& (key->KeyLength != 32)){
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("TKIP KeyLength:0x%x != 32\n", key->KeyLength));
++			ret=_FAIL;
++			goto exit;
++
++		}
++
++		// Check key length for AES.
++		if((encryptionalgo== _AES_)&& (key->KeyLength != 16)) {
++			// For our supplicant, EAPPkt9x.vxd, cannot differentiate TKIP and AES case.
++			if(key->KeyLength == 32) {
++				key->KeyLength = 16; 
++			} else {
++				ret= _FAIL;
++				goto exit;
++			}
++		}
++
++		// Check key length for WEP. For NDTEST, 2005.01.27, by rcnjko.
++		if(	(encryptionalgo== _WEP40_|| encryptionalgo== _WEP104_) && (key->KeyLength != 5 || key->KeyLength != 13)) {
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("WEP KeyLength:0x%x != 5 or 13\n", key->KeyLength));
++			ret=_FAIL;
++			goto exit;
++		}
++
++		bgroup = _FALSE;
++
++		// Check the pairwise key. Added by Annie, 2005-07-06.
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("------------------------------------------\n"));
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("[Pairwise Key set]\n"));
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("------------------------------------------\n"));
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("key index: 0x%8x(0x%8x)\n", key->KeyIndex,(key->KeyIndex&0x3)));
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("key Length: %d\n", key->KeyLength));
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("------------------------------------------\n"));
++	
++	}
++	else 
++	{	
++		// Group key - KeyIndex(BIT30==0)
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("OID_802_11_ADD_KEY: +++++ Group key +++++\n"));
++
++
++		// when add wep key through add key and didn't assigned encryption type before
++		if((padapter->securitypriv.ndisauthtype<=3)&&(padapter->securitypriv.dot118021XGrpPrivacy==0))
++		{
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("keylen=%d( Adapter->securitypriv.dot11PrivacyAlgrthm=%x  )padapter->securitypriv.dot118021XGrpPrivacy(%x)\n", key->KeyLength,padapter->securitypriv.dot11PrivacyAlgrthm,padapter->securitypriv.dot118021XGrpPrivacy));
++
++			switch(key->KeyLength)
++			{
++				case 5:
++					padapter->securitypriv.dot11PrivacyAlgrthm=_WEP40_;
++					RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("Adapter->securitypriv.dot11PrivacyAlgrthm= %x key->KeyLength=%u\n", padapter->securitypriv.dot11PrivacyAlgrthm,key->KeyLength));
++					break;
++				case 13:
++					padapter->securitypriv.dot11PrivacyAlgrthm=_WEP104_;
++					RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("Adapter->securitypriv.dot11PrivacyAlgrthm= %x key->KeyLength=%u\n", padapter->securitypriv.dot11PrivacyAlgrthm,key->KeyLength));
++					break;
++				default:
++					padapter->securitypriv.dot11PrivacyAlgrthm=_NO_PRIVACY_;
++					RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("Adapter->securitypriv.dot11PrivacyAlgrthm= %x key->KeyLength=%u \n", padapter->securitypriv.dot11PrivacyAlgrthm,key->KeyLength));
++					break;
++			}
++			
++			encryptionalgo=padapter->securitypriv.dot11PrivacyAlgrthm;
++			
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,(" Adapter->securitypriv.dot11PrivacyAlgrthm=%x\n", padapter->securitypriv.dot11PrivacyAlgrthm));
++			
++		}
++		else 
++		{
++			encryptionalgo=padapter->securitypriv.dot118021XGrpPrivacy;
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("( Adapter->securitypriv.dot11PrivacyAlgrthm=%x  )encryptionalgo(%x)=padapter->securitypriv.dot118021XGrpPrivacy(%x)keylen=%d\n", padapter->securitypriv.dot11PrivacyAlgrthm,encryptionalgo,padapter->securitypriv.dot118021XGrpPrivacy,key->KeyLength));
++
++		}
++		
++		if((check_fwstate(&padapter->mlmepriv, WIFI_ADHOC_STATE)==_TRUE) && (IS_MAC_ADDRESS_BROADCAST(key->BSSID) == _FALSE)) {
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,(" IBSS but BSSID is not Broadcast Address.\n"));
++			ret= _FAIL;
++			goto exit;
++		}
++
++		// Check key length for TKIP
++		if((encryptionalgo== _TKIP_) && (key->KeyLength != 32)) {
++
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,(" TKIP GTK KeyLength:%u != 32\n", key->KeyLength));
++			ret= _FAIL;
++			goto exit;
++
++		} else if(encryptionalgo== _AES_ && (key->KeyLength != 16 && key->KeyLength != 32) ) {
++			
++			// Check key length for AES
++			// For NDTEST, we allow keylen=32 in this case. 2005.01.27, by rcnjko.
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("<=== SetInfo, OID_802_11_ADD_KEY: AES GTK KeyLength:%u != 16 or 32\n", key->KeyLength));
++			ret= _FAIL;
++			goto exit;
++		}
++
++		// Change the key length for EAPPkt9x.vxd. Added by Annie, 2005-11-03.
++		if((encryptionalgo==  _AES_) && (key->KeyLength == 32) ) {
++			key->KeyLength = 16; 
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("AES key length changed: %u\n", key->KeyLength) );
++		}
++
++		if(key->KeyIndex & 0x8000000) {//error ??? 0x8000_0000
++			bgrouptkey = _TRUE;
++		}
++
++		if((check_fwstate(&padapter->mlmepriv, WIFI_ADHOC_STATE)==_TRUE)&&(check_fwstate(&padapter->mlmepriv, _FW_LINKED)==_TRUE))
++		{
++			bgrouptkey = _TRUE;
++		}
++
++		bgroup = _TRUE;
++
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("------------------------------------------\n") );
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("[Group Key set]\n") );
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("------------------------------------------\n")) ;
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("key index: 0x%8x(0x%8x)\n", key->KeyIndex,(key->KeyIndex&0x3)));
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("key Length: %d\n", key->KeyLength)) ;
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("------------------------------------------\n"));
++		
++	}	
++
++	// If WEP encryption algorithm, just call rtw_set_802_11_add_wep().
++	if((padapter->securitypriv.dot11AuthAlgrthm !=dot11AuthAlgrthm_8021X)&&(encryptionalgo== _WEP40_  || encryptionalgo== _WEP104_))
++	{
++		u8 ret;		
++		u32 keyindex;		
++		u32 len = FIELD_OFFSET(NDIS_802_11_KEY, KeyMaterial) + key->KeyLength;
++		NDIS_802_11_WEP *wep = &padapter->securitypriv.ndiswep;
++				
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("OID_802_11_ADD_KEY: +++++ WEP key +++++\n"));
++
++		wep->Length = len;
++		keyindex = key->KeyIndex&0x7fffffff;
++		wep->KeyIndex = keyindex ;
++		wep->KeyLength = key->KeyLength;
++		
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("OID_802_11_ADD_KEY:Before memcpy \n"));
++
++		_rtw_memcpy(wep->KeyMaterial, key->KeyMaterial, key->KeyLength);	
++		_rtw_memcpy(&(padapter->securitypriv.dot11DefKey[keyindex].skey[0]), key->KeyMaterial, key->KeyLength);
++
++		padapter->securitypriv.dot11DefKeylen[keyindex]=key->KeyLength;		
++		padapter->securitypriv.dot11PrivacyKeyIndex=keyindex;
++		
++		ret = rtw_set_802_11_add_wep(padapter, wep);
++	
++		goto exit;
++		
++	}
++
++	if(key->KeyIndex & 0x20000000){
++		// SetRSC
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("OID_802_11_ADD_KEY: +++++ SetRSC+++++\n"));
++		if(bgroup == _TRUE)
++		{
++			NDIS_802_11_KEY_RSC keysrc=key->KeyRSC & 0x00FFFFFFFFFFFFULL;
++			_rtw_memcpy(&padapter->securitypriv.dot11Grprxpn, &keysrc, 8);			
++		} 
++		else 
++		{		
++			NDIS_802_11_KEY_RSC keysrc=key->KeyRSC & 0x00FFFFFFFFFFFFULL;	
++			_rtw_memcpy(&padapter->securitypriv.dot11Grptxpn, &keysrc, 8);			
++		}
++			
++	}
++
++	// Indicate this key idx is used for TX
++	// Save the key in KeyMaterial
++	if(bgroup == _TRUE) // Group transmit key
++	{
++		int res;
++		
++		if(bgrouptkey == _TRUE)
++		{		
++			padapter->securitypriv.dot118021XGrpKeyid=(u8)key->KeyIndex;
++		}
++		
++		if((key->KeyIndex&0x3) == 0){
++			ret = _FAIL;
++			goto exit;
++		}		
++		
++		_rtw_memset(&padapter->securitypriv.dot118021XGrpKey[(u8)((key->KeyIndex) & 0x03)], 0, 16);
++		_rtw_memset(&padapter->securitypriv.dot118021XGrptxmickey[(u8)((key->KeyIndex) & 0x03)], 0, 16);
++		_rtw_memset(&padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex) & 0x03)], 0, 16);
++		
++		if((key->KeyIndex & 0x10000000))
++		{
++			_rtw_memcpy(&padapter->securitypriv.dot118021XGrptxmickey[(u8)((key->KeyIndex) & 0x03)], key->KeyMaterial + 16, 8);
++			_rtw_memcpy(&padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex) & 0x03)], key->KeyMaterial + 24, 8);
++			
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("\n rtw_set_802_11_add_key:rx mic :0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x\n",
++				padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex) & 0x03)].skey[0],padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex-1) & 0x03)].skey[1],
++				padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex) & 0x03)].skey[2],padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex-1) & 0x03)].skey[3],
++				padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex) & 0x03)].skey[4],padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex-1) & 0x03)].skey[5],
++				padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex) & 0x03)].skey[6],padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex-1) & 0x03)].skey[7]));
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("\n rtw_set_802_11_add_key:set Group mic key!!!!!!!!\n"));
++
++		}
++		else
++		{
++			_rtw_memcpy(&padapter->securitypriv.dot118021XGrptxmickey[(u8)((key->KeyIndex) & 0x03)], key->KeyMaterial + 24, 8);
++			_rtw_memcpy(&padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex) & 0x03)], key->KeyMaterial + 16, 8);
++			
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("\n rtw_set_802_11_add_key:rx mic :0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x\n",
++				padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex) & 0x03)].skey[0],padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex-1) & 0x03)].skey[1],
++				padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex) & 0x03)].skey[2],padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex-1) & 0x03)].skey[3],
++				padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex) & 0x03)].skey[4],padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex-1) & 0x03)].skey[5],
++				padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex) & 0x03)].skey[6],padapter->securitypriv.dot118021XGrprxmickey[(u8)((key->KeyIndex-1) & 0x03)].skey[7]));
++			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("\n rtw_set_802_11_add_key:set Group mic key!!!!!!!!\n"));
++		
++		}
++
++		//set group key by index
++		_rtw_memcpy(&padapter->securitypriv.dot118021XGrpKey[(u8)((key->KeyIndex) & 0x03)], key->KeyMaterial, key->KeyLength);
++		
++		key->KeyIndex=key->KeyIndex & 0x03;
++		
++		padapter->securitypriv.binstallGrpkey=_TRUE;
++		
++		padapter->securitypriv.bcheck_grpkey=_FALSE;
++		
++		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("reset group key"));
++		
++		res=rtw_set_key(padapter,&padapter->securitypriv, key->KeyIndex, 1);
++
++		if(res==_FAIL)
++			ret= _FAIL;
++
++		goto exit;
++			
++	}
++	else // Pairwise Key
++	{
++		u8 res;
++		
++		pbssid=get_bssid(&padapter->mlmepriv);
++		stainfo=rtw_get_stainfo(&padapter->stapriv , pbssid );
++		
++		if(stainfo!=NULL)
++		{			
++			_rtw_memset( &stainfo->dot118021x_UncstKey, 0, 16);// clear keybuffer
++			
++			_rtw_memcpy(&stainfo->dot118021x_UncstKey, key->KeyMaterial, 16);
++			
++			if(encryptionalgo== _TKIP_)
++			{
++				padapter->securitypriv.busetkipkey=_FALSE;
++				
++				//_set_timer(&padapter->securitypriv.tkip_timer, 50);
++				
++				RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("\n ==========_set_timer\n"));
++				
++				// if TKIP, save the Receive/Transmit MIC key in KeyMaterial[128-255]
++				if((key->KeyIndex & 0x10000000)){
++					_rtw_memcpy(&stainfo->dot11tkiptxmickey, key->KeyMaterial + 16, 8);
++					_rtw_memcpy(&stainfo->dot11tkiprxmickey, key->KeyMaterial + 24, 8);
++
++				} else {
++					_rtw_memcpy(&stainfo->dot11tkiptxmickey, key->KeyMaterial + 24, 8);
++					_rtw_memcpy(&stainfo->dot11tkiprxmickey, key->KeyMaterial + 16, 8);
++
++				}
++		
++			}
++			else if(encryptionalgo == _AES_)
++			{		
++	
++			}
++
++		
++			//Set key to CAM through H2C command
++			if(bgrouptkey)//never go to here
++			{
++				res=rtw_setstakey_cmd(padapter, (unsigned char *)stainfo, _FALSE);
++				RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("\n rtw_set_802_11_add_key:rtw_setstakey_cmd(group)\n"));
++			}
++			else{
++				res=rtw_setstakey_cmd(padapter, (unsigned char *)stainfo, _TRUE);
++				RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("\n rtw_set_802_11_add_key:rtw_setstakey_cmd(unicast)\n"));
++			}
++			
++			if(res ==_FALSE)
++				ret= _FAIL;
++			
++		}
++
++	}
++
++exit:
++	
++_func_exit_;
++
++	return ret;	
++}
++
++u8 rtw_set_802_11_remove_key(_adapter*	padapter, NDIS_802_11_REMOVE_KEY *key){
++	
++	uint				encryptionalgo;
++	u8 * pbssid;
++	struct sta_info *stainfo;
++	u8	bgroup = (key->KeyIndex & 0x4000000) > 0 ? _FALSE: _TRUE;
++	u8	keyIndex = (u8)key->KeyIndex & 0x03;
++	u8	ret=_SUCCESS;
++	
++_func_enter_;
++
++	if ((key->KeyIndex & 0xbffffffc) > 0) {
++		ret=_FAIL;
++		goto exit;
++	}
++
++	if (bgroup == _TRUE) {
++		encryptionalgo= padapter->securitypriv.dot118021XGrpPrivacy;
++		// clear group key by index
++		//NdisZeroMemory(Adapter->MgntInfo.SecurityInfo.KeyBuf[keyIndex], MAX_WEP_KEY_LEN);
++		//Adapter->MgntInfo.SecurityInfo.KeyLen[keyIndex] = 0;
++		
++		_rtw_memset(&padapter->securitypriv.dot118021XGrpKey[keyIndex], 0, 16);
++		
++		//! \todo Send a H2C Command to Firmware for removing this Key in CAM Entry.
++	
++	} else {
++	
++		pbssid=get_bssid(&padapter->mlmepriv);
++		stainfo=rtw_get_stainfo(&padapter->stapriv , pbssid );
++		if(stainfo !=NULL){
++			encryptionalgo=stainfo->dot118021XPrivacy;
++
++		// clear key by BSSID
++		_rtw_memset(&stainfo->dot118021x_UncstKey, 0, 16);
++		
++		//! \todo Send a H2C Command to Firmware for disable this Key in CAM Entry.
++
++		}
++		else{
++			ret= _FAIL;
++			goto exit;
++		}
++	}
++
++exit:
++	
++_func_exit_;
++
++	return _TRUE;
++	
++}
++
++/*
++* rtw_get_cur_max_rate - 
++* @adapter: pointer to _adapter structure
++* 
++* Return 0 or 100Kbps
++*/
++u16 rtw_get_cur_max_rate(_adapter *adapter)
++{
++	int	i = 0;
++	u8	*p;
++	u16	rate = 0, max_rate = 0;
++	struct mlme_ext_priv	*pmlmeext = &adapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct registry_priv *pregistrypriv = &adapter->registrypriv;
++	struct mlme_priv	*pmlmepriv = &adapter->mlmepriv;
++	WLAN_BSSID_EX  *pcur_bss = &pmlmepriv->cur_network.network;
++#ifdef CONFIG_80211N_HT
++	struct rtw_ieee80211_ht_cap *pht_capie;
++	u8	rf_type = 0;
++	u8	bw_40MHz=0, short_GI_20=0, short_GI_40=0;
++	u16	mcs_rate=0;
++	u32	ht_ielen = 0;	
++#endif
++
++#ifdef CONFIG_MP_INCLUDED
++	if (adapter->registrypriv.mp_mode == 1)
++	{	
++		if (check_fwstate(pmlmepriv, WIFI_MP_STATE) == _TRUE)
++			return 0;
++	}
++#endif
++
++	if((check_fwstate(pmlmepriv, _FW_LINKED) != _TRUE) 
++		&& (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) != _TRUE))
++		return 0;
++
++#ifdef CONFIG_80211N_HT
++	if (pmlmeext->cur_wireless_mode & (WIRELESS_11_24N|WIRELESS_11_5N)) {
++		p = rtw_get_ie(&pcur_bss->IEs[12], _HT_CAPABILITY_IE_, &ht_ielen, pcur_bss->IELength-12);
++		if(p && ht_ielen>0)
++		{
++			pht_capie = (struct rtw_ieee80211_ht_cap *)(p+2);
++		
++			_rtw_memcpy(&mcs_rate , pht_capie->supp_mcs_set, 2);
++
++			//bw_40MHz = (pht_capie->cap_info&IEEE80211_HT_CAP_SUP_WIDTH) ? 1:0;
++			//cur_bwmod is updated by beacon, pmlmeinfo is updated by association response
++			bw_40MHz = (pmlmeext->cur_bwmode && (HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH & pmlmeinfo->HT_info.infos[0])) ? 1:0;
++			
++			//short_GI = (pht_capie->cap_info&(IEEE80211_HT_CAP_SGI_20|IEEE80211_HT_CAP_SGI_40)) ? 1:0;
++			short_GI_20 = (pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info&IEEE80211_HT_CAP_SGI_20) ? 1:0;
++			short_GI_40 = (pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info&IEEE80211_HT_CAP_SGI_40) ? 1:0;
++
++			rtw_hal_get_hwreg(adapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type));
++			max_rate = rtw_mcs_rate(
++				rf_type,
++				bw_40MHz & (pregistrypriv->cbw40_enable), 
++				short_GI_20,
++				short_GI_40,
++				pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate
++			);
++		}
++	} 
++	else
++#endif //CONFIG_80211N_HT
++	{
++		while( (pcur_bss->SupportedRates[i]!=0) && (pcur_bss->SupportedRates[i]!=0xFF))
++		{
++			rate = pcur_bss->SupportedRates[i]&0x7F;
++			if(rate>max_rate)
++				max_rate = rate;
++			i++;
++		}
++	
++		max_rate = max_rate*10/2;
++	}
++
++	return max_rate;
++}
++
++/*
++* rtw_set_scan_mode - 
++* @adapter: pointer to _adapter structure
++* @scan_mode: 
++* 
++* Return _SUCCESS or _FAIL
++*/
++int rtw_set_scan_mode(_adapter *adapter, RT_SCAN_TYPE scan_mode)
++{
++	if(scan_mode != SCAN_ACTIVE && scan_mode != SCAN_PASSIVE)
++		return _FAIL;
++	
++	adapter->mlmepriv.scan_mode = scan_mode;
++
++	return _SUCCESS;
++}
++
++/*
++* rtw_set_channel_plan - 
++* @adapter: pointer to _adapter structure
++* @channel_plan: 
++* 
++* Return _SUCCESS or _FAIL
++*/
++int rtw_set_channel_plan(_adapter *adapter, u8 channel_plan)
++{
++	struct registry_priv *pregistrypriv = &adapter->registrypriv;
++	struct mlme_priv *pmlmepriv = &adapter->mlmepriv;
++
++	//handle by cmd_thread to sync with scan operation
++	return rtw_set_chplan_cmd(adapter, channel_plan, 1);
++}
++
++/*
++* rtw_set_country - 
++* @adapter: pointer to _adapter structure
++* @country_code: string of country code
++* 
++* Return _SUCCESS or _FAIL
++*/
++int rtw_set_country(_adapter *adapter, const char *country_code)
++{
++	int channel_plan = RT_CHANNEL_DOMAIN_WORLD_WIDE_5G;
++
++	DBG_871X("%s country_code:%s\n", __func__, country_code);
++
++	//TODO: should have a table to match country code and RT_CHANNEL_DOMAIN
++	//TODO: should consider 2-character and 3-character country code
++	if(0 == strcmp(country_code, "US"))
++		channel_plan = RT_CHANNEL_DOMAIN_FCC;
++	else if(0 == strcmp(country_code, "EU"))
++		channel_plan = RT_CHANNEL_DOMAIN_ETSI;
++	else if(0 == strcmp(country_code, "JP"))
++		channel_plan = RT_CHANNEL_DOMAIN_MKK;
++	else if(0 == strcmp(country_code, "CN"))
++		channel_plan = RT_CHANNEL_DOMAIN_CHINA;
++	else
++		DBG_871X("%s unknown country_code:%s\n", __FUNCTION__, country_code);
++	
++	return rtw_set_channel_plan(adapter, channel_plan);
++}
++
++/*
++* rtw_set_band - 
++* @adapter: pointer to _adapter structure
++* @band: band to set
++* 
++* Return _SUCCESS or _FAIL
++*/
++int rtw_set_band(_adapter *adapter, enum _BAND band)
++{
++	if (rtw_band_valid(band)) {
++		DBG_871X(FUNC_ADPT_FMT" band:%d\n", FUNC_ADPT_ARG(adapter), band);
++		adapter->setband = band;
++		return _SUCCESS;
++	}
++
++	DBG_871X_LEVEL(_drv_always_, FUNC_ADPT_FMT" band:%d fail\n", FUNC_ADPT_ARG(adapter), band);
++	return _FAIL;
++}
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_iol.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_iol.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_iol.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_iol.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,263 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++
++#include<rtw_iol.h>
++
++#ifdef CONFIG_IOL
++struct xmit_frame	*rtw_IOL_accquire_xmit_frame(ADAPTER *adapter)
++{
++	struct xmit_frame	*xmit_frame;
++	struct xmit_buf	*xmitbuf;
++	struct pkt_attrib	*pattrib;
++	struct xmit_priv	*pxmitpriv = &(adapter->xmitpriv);
++
++#if 1
++	if ((xmit_frame = rtw_alloc_xmitframe(pxmitpriv)) == NULL)
++	{
++		DBG_871X("%s rtw_alloc_xmitframe return null\n", __FUNCTION__);
++		goto exit;
++	}
++	
++	if ((xmitbuf = rtw_alloc_xmitbuf(pxmitpriv)) == NULL)
++	{
++		DBG_871X("%s rtw_alloc_xmitbuf return null\n", __FUNCTION__);
++		rtw_free_xmitframe(pxmitpriv, xmit_frame);
++		xmit_frame=NULL;
++		goto exit;
++	}
++	
++	xmit_frame->frame_tag = MGNT_FRAMETAG;
++	xmit_frame->pxmitbuf = xmitbuf;
++	xmit_frame->buf_addr = xmitbuf->pbuf;
++	xmitbuf->priv_data = xmit_frame;
++
++	pattrib = &xmit_frame->attrib;
++	update_mgntframe_attrib(adapter, pattrib);
++	pattrib->qsel = 0x10;
++	pattrib->pktlen = pattrib->last_txcmdsz = 0;
++
++#else
++	if ((xmit_frame = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		DBG_871X("%s alloc_mgtxmitframe return null\n", __FUNCTION__);
++	}
++	else {
++		pattrib = &xmit_frame->attrib;
++		update_mgntframe_attrib(adapter, pattrib);
++		pattrib->qsel = 0x10;
++		pattrib->pktlen = pattrib->last_txcmdsz = 0;
++	}
++#endif
++
++exit:
++	return xmit_frame;
++}
++
++
++int rtw_IOL_append_cmds(struct xmit_frame *xmit_frame, u8 *IOL_cmds, u32 cmd_len)
++{
++	struct pkt_attrib	*pattrib = &xmit_frame->attrib;
++	u16 buf_offset;
++	u32 ori_len;
++
++//Todo: bulkout without this offset
++#ifdef CONFIG_USB_HCI
++	buf_offset = TXDESC_OFFSET;
++#else
++	buf_offset = 0;
++#endif
++
++	ori_len = buf_offset+pattrib->pktlen;
++
++	//check if the io_buf can accommodate new cmds
++	if(ori_len + cmd_len + 8 > MAX_XMITBUF_SZ) {
++		DBG_871X("%s %u is large than MAX_XMITBUF_SZ:%u, can't accommodate new cmds\n", __FUNCTION__
++			, ori_len + cmd_len + 8, MAX_XMITBUF_SZ);
++		return _FAIL;
++	}
++
++	_rtw_memcpy(xmit_frame->buf_addr + buf_offset + pattrib->pktlen, IOL_cmds, cmd_len);
++	pattrib->pktlen += cmd_len;
++	pattrib->last_txcmdsz += cmd_len;
++
++	//DBG_871X("%s ori:%u + cmd_len:%u = %u\n", __FUNCTION__, ori_len, cmd_len, buf_offset+pattrib->pktlen);
++	
++	return _SUCCESS;
++}
++
++int rtw_IOL_append_LLT_cmd(struct xmit_frame *xmit_frame, u8 page_boundary)
++{
++	IOL_CMD cmd = {0x0, IOL_CMD_LLT, 0x0, 0x0};
++	
++	RTW_PUT_BE32((u8*)&cmd.value, (u32)page_boundary);
++
++	return rtw_IOL_append_cmds(xmit_frame, (u8*)&cmd, 8);
++}
++
++int _rtw_IOL_append_WB_cmd(struct xmit_frame *xmit_frame, u16 addr, u8 value)
++{
++	IOL_CMD cmd = {0x0, IOL_CMD_WB_REG, 0x0, 0x0};
++	
++	RTW_PUT_BE16((u8*)&cmd.address, (u16)addr);
++	RTW_PUT_BE32((u8*)&cmd.value, (u32)value);
++
++	return rtw_IOL_append_cmds(xmit_frame, (u8*)&cmd, 8);
++}
++
++int _rtw_IOL_append_WW_cmd(struct xmit_frame *xmit_frame, u16 addr, u16 value)
++{
++	IOL_CMD cmd = {0x0, IOL_CMD_WW_REG, 0x0, 0x0};
++	
++	RTW_PUT_BE16((u8*)&cmd.address, (u16)addr);
++	RTW_PUT_BE32((u8*)&cmd.value, (u32)value);
++
++	return rtw_IOL_append_cmds(xmit_frame, (u8*)&cmd, 8);
++}
++
++int _rtw_IOL_append_WD_cmd(struct xmit_frame *xmit_frame, u16 addr, u32 value)
++{
++	IOL_CMD cmd = {0x0, IOL_CMD_WD_REG, 0x0, 0x0};
++	u8* pos = (u8 *)&cmd;
++	
++	RTW_PUT_BE16((u8*)&cmd.address, (u16)addr);
++	RTW_PUT_BE32((u8*)&cmd.value, (u32)value);
++
++	return rtw_IOL_append_cmds(xmit_frame, (u8*)&cmd, 8);
++}
++
++#ifdef DBG_IO
++int dbg_rtw_IOL_append_WB_cmd(struct xmit_frame *xmit_frame, u16 addr, u8 value, const char *caller, const int line)
++{
++	if (match_write_sniff_ranges(addr, 1))
++		DBG_871X("DBG_IO %s:%d IOL_WB(0x%04x, 0x%02x)\n", caller, line, addr, value);
++
++	return _rtw_IOL_append_WB_cmd(xmit_frame, addr, value);
++}
++
++int dbg_rtw_IOL_append_WW_cmd(struct xmit_frame *xmit_frame, u16 addr, u16 value, const char *caller, const int line)
++{
++	if (match_write_sniff_ranges(addr, 2))
++		DBG_871X("DBG_IO %s:%d IOL_WW(0x%04x, 0x%04x)\n", caller, line, addr, value);
++
++	return _rtw_IOL_append_WW_cmd(xmit_frame, addr, value);
++}
++
++int dbg_rtw_IOL_append_WD_cmd(struct xmit_frame *xmit_frame, u16 addr, u32 value, const char *caller, const int line)
++{
++	if (match_write_sniff_ranges(addr, 4))
++		DBG_871X("DBG_IO %s:%d IOL_WD(0x%04x, 0x%08x)\n", caller, line, addr, value);
++
++	return _rtw_IOL_append_WD_cmd(xmit_frame, addr, value);
++}
++#endif
++
++int rtw_IOL_append_DELAY_US_cmd(struct xmit_frame *xmit_frame, u16 us)
++{
++	IOL_CMD cmd = {0x0, IOL_CMD_DELAY_US, 0x0, 0x0};
++	
++	RTW_PUT_BE32((u8*)&cmd.value, (u32)us);
++
++	//DBG_871X("%s %u\n", __FUNCTION__, us);
++
++	return rtw_IOL_append_cmds(xmit_frame, (u8*)&cmd, 8);
++}
++
++int rtw_IOL_append_DELAY_MS_cmd(struct xmit_frame *xmit_frame, u16 ms)
++{
++	IOL_CMD cmd = {0x0, IOL_CMD_DELAY_MS, 0x0, 0x0};
++	
++	RTW_PUT_BE32((u8*)&cmd.value, (u32)ms);
++
++	//DBG_871X("%s %u\n", __FUNCTION__, ms);
++
++	return rtw_IOL_append_cmds(xmit_frame, (u8*)&cmd, 8);
++}
++
++int rtw_IOL_append_END_cmd(struct xmit_frame *xmit_frame)
++{
++	struct pkt_attrib	*pattrib = &xmit_frame->attrib;
++	u16 buf_offset;
++	u32 ori_len;
++	IOL_CMD end_cmd = {0x0, IOL_CMD_END, 0x0, 0x0};
++
++//Todo: bulkout without this offset
++#ifdef CONFIG_USB_HCI
++	buf_offset = TXDESC_OFFSET;
++#else
++	buf_offset = 0;
++#endif
++
++	ori_len = buf_offset+pattrib->pktlen;
++
++	//check if the io_buf can accommodate new cmds
++	if(ori_len + 8 > MAX_XMITBUF_SZ) {
++		DBG_871X("%s %u is large than MAX_XMITBUF_SZ:%u, can't accommodate end cmd\n", __FUNCTION__
++			, ori_len + 8, MAX_XMITBUF_SZ);
++		return _FAIL;
++	}
++
++	_rtw_memcpy(xmit_frame->buf_addr + buf_offset + pattrib->pktlen, (u8*)&end_cmd, 8);
++	pattrib->pktlen += 8;
++	pattrib->last_txcmdsz += 8;
++
++	//DBG_871X("%s ori:%u + 8 = %u\n", __FUNCTION__ , ori_len, buf_offset+pattrib->pktlen);
++	
++	return _SUCCESS;
++}
++
++int rtw_IOL_exec_cmds_sync(ADAPTER *adapter, struct xmit_frame *xmit_frame, u32 max_wating_ms)
++{
++	return rtw_hal_iol_cmd(adapter, xmit_frame, max_wating_ms);
++}
++
++int rtw_IOL_exec_cmd_array_sync(PADAPTER adapter, u8 *IOL_cmds, u32 cmd_num, u32 max_wating_ms)
++{
++	struct xmit_frame	*xmit_frame;
++
++	if((xmit_frame=rtw_IOL_accquire_xmit_frame(adapter)) == NULL)
++		return _FAIL;
++
++	if(rtw_IOL_append_cmds(xmit_frame, IOL_cmds, cmd_num<<3) == _FAIL)
++		return _FAIL;
++
++	return rtw_IOL_exec_cmds_sync(adapter, xmit_frame, max_wating_ms);
++}
++
++int rtw_IOL_exec_empty_cmds_sync(ADAPTER *adapter, u32 max_wating_ms)
++{
++	IOL_CMD end_cmd = {0x0, IOL_CMD_END, 0x0, 0x0};
++	return rtw_IOL_exec_cmd_array_sync(adapter, (u8*)&end_cmd, 1, max_wating_ms);
++}
++
++bool rtw_IOL_applied(ADAPTER *adapter)
++{
++	if(adapter->registrypriv.force_iol)
++		return _TRUE;
++
++#ifdef CONFIG_USB_HCI
++	if(!adapter_to_dvobj(adapter)->ishighspeed)
++		return _TRUE;
++#endif
++
++	return _FALSE;
++}
++
++#endif //CONFIG_IOL
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_mlme.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_mlme.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_mlme.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_mlme.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,3967 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _RTW_MLME_C_
++
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <recv_osdep.h>
++#include <xmit_osdep.h>
++#include <hal_intf.h>
++#include <mlme_osdep.h>
++#include <sta_info.h>
++#include <wifi.h>
++#include <wlan_bssdef.h>
++#include <rtw_ioctl_set.h>
++
++extern void indicate_wx_scan_complete_event(_adapter *padapter);
++extern u8 rtw_do_join(_adapter * padapter);
++
++#ifdef CONFIG_DISABLE_MCS13TO15
++extern unsigned char	MCS_rate_2R_MCS13TO15_OFF[16];
++extern unsigned char	MCS_rate_2R[16];
++#else //CONFIG_DISABLE_MCS13TO15
++extern unsigned char	MCS_rate_2R[16];
++#endif //CONFIG_DISABLE_MCS13TO15
++extern unsigned char	MCS_rate_1R[16];
++
++sint	_rtw_init_mlme_priv (_adapter* padapter)
++{
++	sint	i;
++	u8	*pbuf;
++	struct wlan_network	*pnetwork;
++	struct mlme_priv		*pmlmepriv = &padapter->mlmepriv;
++	sint	res = _SUCCESS;
++
++_func_enter_;
++
++	// We don't need to memset padapter->XXX to zero, because adapter is allocated by rtw_zvmalloc().
++	//_rtw_memset((u8 *)pmlmepriv, 0, sizeof(struct mlme_priv));
++
++	pmlmepriv->nic_hdl = (u8 *)padapter;
++
++	pmlmepriv->pscanned = NULL;
++	pmlmepriv->fw_state = 0;
++	pmlmepriv->cur_network.network.InfrastructureMode = Ndis802_11AutoUnknown;
++	pmlmepriv->scan_mode=SCAN_ACTIVE;// 1: active, 0: pasive. Maybe someday we should rename this varable to "active_mode" (Jeff)
++
++	_rtw_spinlock_init(&(pmlmepriv->lock));	
++	_rtw_init_queue(&(pmlmepriv->free_bss_pool));
++	_rtw_init_queue(&(pmlmepriv->scanned_queue));
++
++	set_scanned_network_val(pmlmepriv, 0);
++	
++	_rtw_memset(&pmlmepriv->assoc_ssid,0,sizeof(NDIS_802_11_SSID));
++
++	pbuf = rtw_zvmalloc(MAX_BSS_CNT * (sizeof(struct wlan_network)));
++	
++	if (pbuf == NULL){
++		res=_FAIL;
++		goto exit;
++	}
++	pmlmepriv->free_bss_buf = pbuf;
++		
++	pnetwork = (struct wlan_network *)pbuf;
++	
++	for(i = 0; i < MAX_BSS_CNT; i++)
++	{		
++		_rtw_init_listhead(&(pnetwork->list));
++
++		rtw_list_insert_tail(&(pnetwork->list), &(pmlmepriv->free_bss_pool.queue));
++
++		pnetwork++;
++	}
++
++	//allocate DMA-able/Non-Page memory for cmd_buf and rsp_buf
++
++	rtw_clear_scan_deny(padapter);
++
++	rtw_init_mlme_timer(padapter);
++
++exit:
++
++_func_exit_;
++
++	return res;
++}	
++
++void rtw_mfree_mlme_priv_lock (struct mlme_priv *pmlmepriv);
++void rtw_mfree_mlme_priv_lock (struct mlme_priv *pmlmepriv)
++{
++	_rtw_spinlock_free(&pmlmepriv->lock);
++	_rtw_spinlock_free(&(pmlmepriv->free_bss_pool.lock));
++	_rtw_spinlock_free(&(pmlmepriv->scanned_queue.lock));
++}
++
++static void rtw_free_mlme_ie_data(u8 **ppie, u32 *plen)
++{
++	if(*ppie)
++	{		
++		rtw_mfree(*ppie, *plen);
++		*plen = 0;
++		*ppie=NULL;
++	}	
++}
++
++void rtw_free_mlme_priv_ie_data(struct mlme_priv *pmlmepriv)
++{
++#if defined (CONFIG_AP_MODE) && defined (CONFIG_NATIVEAP_MLME)
++	rtw_buf_free(&pmlmepriv->assoc_req, &pmlmepriv->assoc_req_len);
++	rtw_buf_free(&pmlmepriv->assoc_rsp, &pmlmepriv->assoc_rsp_len);
++	rtw_free_mlme_ie_data(&pmlmepriv->wps_beacon_ie, &pmlmepriv->wps_beacon_ie_len);
++	rtw_free_mlme_ie_data(&pmlmepriv->wps_probe_req_ie, &pmlmepriv->wps_probe_req_ie_len);
++	rtw_free_mlme_ie_data(&pmlmepriv->wps_probe_resp_ie, &pmlmepriv->wps_probe_resp_ie_len);
++	rtw_free_mlme_ie_data(&pmlmepriv->wps_assoc_resp_ie, &pmlmepriv->wps_assoc_resp_ie_len);
++	
++	rtw_free_mlme_ie_data(&pmlmepriv->p2p_beacon_ie, &pmlmepriv->p2p_beacon_ie_len);
++	rtw_free_mlme_ie_data(&pmlmepriv->p2p_probe_req_ie, &pmlmepriv->p2p_probe_req_ie_len);
++	rtw_free_mlme_ie_data(&pmlmepriv->p2p_probe_resp_ie, &pmlmepriv->p2p_probe_resp_ie_len);
++	rtw_free_mlme_ie_data(&pmlmepriv->p2p_go_probe_resp_ie, &pmlmepriv->p2p_go_probe_resp_ie_len);
++	rtw_free_mlme_ie_data(&pmlmepriv->p2p_assoc_req_ie, &pmlmepriv->p2p_assoc_req_ie_len);
++#endif
++
++#if defined(CONFIG_WFD) && defined(CONFIG_IOCTL_CFG80211)	
++	rtw_free_mlme_ie_data(&pmlmepriv->wfd_beacon_ie, &pmlmepriv->wfd_beacon_ie_len);
++	rtw_free_mlme_ie_data(&pmlmepriv->wfd_probe_req_ie, &pmlmepriv->wfd_probe_req_ie_len);
++	rtw_free_mlme_ie_data(&pmlmepriv->wfd_probe_resp_ie, &pmlmepriv->wfd_probe_resp_ie_len);
++	rtw_free_mlme_ie_data(&pmlmepriv->wfd_go_probe_resp_ie, &pmlmepriv->wfd_go_probe_resp_ie_len);
++	rtw_free_mlme_ie_data(&pmlmepriv->wfd_assoc_req_ie, &pmlmepriv->wfd_assoc_req_ie_len);
++#endif
++
++}
++
++void _rtw_free_mlme_priv (struct mlme_priv *pmlmepriv)
++{
++_func_enter_;
++
++	rtw_free_mlme_priv_ie_data(pmlmepriv);
++
++	if(pmlmepriv){
++		rtw_mfree_mlme_priv_lock (pmlmepriv);
++
++		if (pmlmepriv->free_bss_buf) {
++			rtw_vmfree(pmlmepriv->free_bss_buf, MAX_BSS_CNT * sizeof(struct wlan_network));
++		}
++	}
++_func_exit_;	
++}
++
++sint	_rtw_enqueue_network(_queue *queue, struct wlan_network *pnetwork)
++{
++	_irqL irqL;
++
++_func_enter_;	
++
++	if (pnetwork == NULL)
++		goto exit;
++	
++	_enter_critical_bh(&queue->lock, &irqL);
++
++	rtw_list_insert_tail(&pnetwork->list, &queue->queue);
++
++	_exit_critical_bh(&queue->lock, &irqL);
++
++exit:	
++
++_func_exit_;		
++
++	return _SUCCESS;
++}
++
++struct	wlan_network *_rtw_dequeue_network(_queue *queue)
++{
++	_irqL irqL;
++
++	struct wlan_network *pnetwork;
++
++_func_enter_;	
++
++	_enter_critical_bh(&queue->lock, &irqL);
++
++	if (_rtw_queue_empty(queue) == _TRUE)
++
++		pnetwork = NULL;
++	
++	else
++	{
++		pnetwork = LIST_CONTAINOR(get_next(&queue->queue), struct wlan_network, list);
++		
++		rtw_list_delete(&(pnetwork->list));
++	}
++	
++	_exit_critical_bh(&queue->lock, &irqL);
++
++_func_exit_;		
++
++	return pnetwork;
++}
++
++struct	wlan_network *_rtw_alloc_network(struct	mlme_priv *pmlmepriv )//(_queue *free_queue)
++{
++	_irqL	irqL;
++	struct	wlan_network	*pnetwork;	
++	_queue *free_queue = &pmlmepriv->free_bss_pool;
++	_list* plist = NULL;
++	
++_func_enter_;	
++
++	_enter_critical_bh(&free_queue->lock, &irqL);
++	
++	if (_rtw_queue_empty(free_queue) == _TRUE) {
++		pnetwork=NULL;
++		goto exit;
++	}
++	plist = get_next(&(free_queue->queue));
++	
++	pnetwork = LIST_CONTAINOR(plist , struct wlan_network, list);
++	
++	rtw_list_delete(&pnetwork->list);
++	
++	RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("_rtw_alloc_network: ptr=%p\n", plist));
++	pnetwork->network_type = 0;
++	pnetwork->fixed = _FALSE;
++	pnetwork->last_scanned = rtw_get_current_time();
++	pnetwork->aid=0;	
++	pnetwork->join_res=0;
++
++	pmlmepriv->num_of_scanned ++;
++	
++exit:
++	_exit_critical_bh(&free_queue->lock, &irqL);
++
++_func_exit_;		
++
++	return pnetwork;	
++}
++
++void _rtw_free_network(struct	mlme_priv *pmlmepriv ,struct wlan_network *pnetwork, u8 isfreeall)
++{
++	u32 curr_time, delta_time;
++	u32 lifetime = SCANQUEUE_LIFETIME;
++	_irqL irqL;	
++	_queue *free_queue = &(pmlmepriv->free_bss_pool);
++	
++_func_enter_;		
++
++	if (pnetwork == NULL)
++		goto exit;
++
++	if (pnetwork->fixed == _TRUE)
++		goto exit;
++
++	curr_time = rtw_get_current_time();	
++
++	if ( (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE)==_TRUE ) || 
++		(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE)==_TRUE ) )
++		lifetime = 1;
++
++	if(!isfreeall)
++	{
++#ifdef PLATFORM_WINDOWS
++
++		delta_time = (curr_time -pnetwork->last_scanned)/10;
++
++		if(delta_time  < lifetime*1000000)// unit:usec
++		{
++			goto exit;
++		}
++
++#endif
++
++#ifdef PLATFORM_LINUX
++
++		delta_time = (curr_time -pnetwork->last_scanned)/HZ;	
++
++		if(delta_time < lifetime)// unit:sec
++		{		
++			goto exit;
++		}
++
++#endif
++
++#ifdef PLATFORM_FREEBSD
++        //i think needs to check again
++		delta_time = (curr_time -pnetwork->last_scanned)/hz;	
++
++		if(delta_time < lifetime)// unit:sec
++		{		
++			goto exit;
++		}
++
++#endif
++	}
++
++	_enter_critical_bh(&free_queue->lock, &irqL);
++	
++	rtw_list_delete(&(pnetwork->list));
++
++	rtw_list_insert_tail(&(pnetwork->list),&(free_queue->queue));
++		
++	pmlmepriv->num_of_scanned --;
++	
++
++	//DBG_871X("_rtw_free_network:SSID=%s\n", pnetwork->network.Ssid.Ssid);
++	
++	_exit_critical_bh(&free_queue->lock, &irqL);
++	
++exit:		
++	
++_func_exit_;			
++
++}
++
++void _rtw_free_network_nolock(struct	mlme_priv *pmlmepriv, struct wlan_network *pnetwork)
++{
++
++	_queue *free_queue = &(pmlmepriv->free_bss_pool);
++
++_func_enter_;		
++
++	if (pnetwork == NULL)
++		goto exit;
++
++	if (pnetwork->fixed == _TRUE)
++		goto exit;
++
++	//_enter_critical(&free_queue->lock, &irqL);
++	
++	rtw_list_delete(&(pnetwork->list));
++
++	rtw_list_insert_tail(&(pnetwork->list), get_list_head(free_queue));
++		
++	pmlmepriv->num_of_scanned --;
++	
++	//_exit_critical(&free_queue->lock, &irqL);
++	
++exit:		
++
++_func_exit_;			
++
++}
++
++
++/*
++	return the wlan_network with the matching addr
++
++	Shall be calle under atomic context... to avoid possible racing condition...
++*/
++struct wlan_network *_rtw_find_network(_queue *scanned_queue, u8 *addr)
++{
++
++	//_irqL irqL;
++	_list	*phead, *plist;
++	struct	wlan_network *pnetwork = NULL;
++	u8 zero_addr[ETH_ALEN] = {0,0,0,0,0,0};
++	
++_func_enter_;	
++
++	if(_rtw_memcmp(zero_addr, addr, ETH_ALEN)){
++		pnetwork=NULL;
++		goto exit;
++	}
++	
++	//_enter_critical_bh(&scanned_queue->lock, &irqL);
++	
++	phead = get_list_head(scanned_queue);
++	plist = get_next(phead);
++	 
++	while (plist != phead)
++       {
++                pnetwork = LIST_CONTAINOR(plist, struct wlan_network ,list);
++
++		if (_rtw_memcmp(addr, pnetwork->network.MacAddress, ETH_ALEN) == _TRUE)
++                        break;
++		
++		plist = get_next(plist);
++        }
++
++	if(plist == phead)
++		pnetwork = NULL;
++
++	//_exit_critical_bh(&scanned_queue->lock, &irqL);
++	
++exit:		
++	
++_func_exit_;		
++
++	return pnetwork;
++	
++}
++
++
++void _rtw_free_network_queue(_adapter *padapter, u8 isfreeall)
++{
++	_irqL irqL;
++	_list *phead, *plist;
++	struct wlan_network *pnetwork;
++	struct mlme_priv* pmlmepriv = &padapter->mlmepriv;
++	_queue *scanned_queue = &pmlmepriv->scanned_queue;
++
++_func_enter_;	
++	
++
++	_enter_critical_bh(&scanned_queue->lock, &irqL);
++
++	phead = get_list_head(scanned_queue);
++	plist = get_next(phead);
++
++	while (rtw_end_of_queue_search(phead, plist) == _FALSE)
++	{
++
++		pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list);
++
++		plist = get_next(plist);
++
++		_rtw_free_network(pmlmepriv,pnetwork, isfreeall);
++		
++	}
++
++	_exit_critical_bh(&scanned_queue->lock, &irqL);
++	
++_func_exit_;		
++
++}
++
++
++
++
++sint rtw_if_up(_adapter *padapter)	{
++
++	sint res;
++_func_enter_;		
++
++	if( padapter->bDriverStopped || padapter->bSurpriseRemoved ||
++		(check_fwstate(&padapter->mlmepriv, _FW_LINKED)== _FALSE)){		
++		RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("rtw_if_up:bDriverStopped(%d) OR bSurpriseRemoved(%d)", padapter->bDriverStopped, padapter->bSurpriseRemoved));	
++		res=_FALSE;
++	}
++	else
++		res=  _TRUE;
++	
++_func_exit_;
++	return res;
++}
++
++
++void rtw_generate_random_ibss(u8* pibss)
++{
++	u32	curtime = rtw_get_current_time();
++
++_func_enter_;
++	pibss[0] = 0x02;  //in ad-hoc mode bit1 must set to 1
++	pibss[1] = 0x11;
++	pibss[2] = 0x87;
++	pibss[3] = (u8)(curtime & 0xff) ;//p[0];
++	pibss[4] = (u8)((curtime>>8) & 0xff) ;//p[1];
++	pibss[5] = (u8)((curtime>>16) & 0xff) ;//p[2];
++_func_exit_;
++	return;
++}
++
++u8 *rtw_get_capability_from_ie(u8 *ie)
++{
++	return (ie + 8 + 2);
++}
++
++
++u16 rtw_get_capability(WLAN_BSSID_EX *bss)
++{
++	u16	val;
++_func_enter_;	
++
++	_rtw_memcpy((u8 *)&val, rtw_get_capability_from_ie(bss->IEs), 2); 
++
++_func_exit_;		
++	return le16_to_cpu(val);
++}
++
++u8 *rtw_get_timestampe_from_ie(u8 *ie)
++{
++	return (ie + 0);	
++}
++
++u8 *rtw_get_beacon_interval_from_ie(u8 *ie)
++{
++	return (ie + 8);	
++}
++
++
++int	rtw_init_mlme_priv (_adapter *padapter)//(struct	mlme_priv *pmlmepriv)
++{
++	int	res;
++_func_enter_;	
++	res = _rtw_init_mlme_priv(padapter);// (pmlmepriv);
++_func_exit_;	
++	return res;
++}
++
++void rtw_free_mlme_priv (struct mlme_priv *pmlmepriv)
++{
++_func_enter_;
++	RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("rtw_free_mlme_priv\n"));
++	_rtw_free_mlme_priv (pmlmepriv);
++_func_exit_;	
++}
++
++int	rtw_enqueue_network(_queue *queue, struct wlan_network *pnetwork);
++int	rtw_enqueue_network(_queue *queue, struct wlan_network *pnetwork)
++{
++	int	res;
++_func_enter_;		
++	res = _rtw_enqueue_network(queue, pnetwork);
++_func_exit_;		
++	return res;
++}
++
++
++#ifndef PLATFORM_FREEBSD //Baron
++static struct	wlan_network *rtw_dequeue_network(_queue *queue)
++{
++	struct wlan_network *pnetwork;
++_func_enter_;		
++	pnetwork = _rtw_dequeue_network(queue);
++_func_exit_;		
++	return pnetwork;
++}
++#endif //PLATFORM_FREEBSD
++
++struct	wlan_network *rtw_alloc_network(struct	mlme_priv *pmlmepriv );
++struct	wlan_network *rtw_alloc_network(struct	mlme_priv *pmlmepriv )//(_queue	*free_queue)
++{
++	struct	wlan_network	*pnetwork;
++_func_enter_;			
++	pnetwork = _rtw_alloc_network(pmlmepriv);
++_func_exit_;			
++	return pnetwork;
++}
++
++void rtw_free_network(struct mlme_priv *pmlmepriv, struct	wlan_network *pnetwork, u8 is_freeall);
++void rtw_free_network(struct mlme_priv *pmlmepriv, struct	wlan_network *pnetwork, u8 is_freeall)//(struct	wlan_network *pnetwork, _queue	*free_queue)
++{
++_func_enter_;		
++	RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("rtw_free_network==> ssid = %s \n\n" , pnetwork->network.Ssid.Ssid));
++	_rtw_free_network(pmlmepriv, pnetwork, is_freeall);
++_func_exit_;		
++}
++
++void rtw_free_network_nolock(struct mlme_priv *pmlmepriv, struct wlan_network *pnetwork );
++void rtw_free_network_nolock(struct mlme_priv *pmlmepriv, struct wlan_network *pnetwork )
++{
++_func_enter_;		
++	//RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("rtw_free_network==> ssid = %s \n\n" , pnetwork->network.Ssid.Ssid));
++	_rtw_free_network_nolock(pmlmepriv, pnetwork);
++_func_exit_;		
++}
++
++
++void rtw_free_network_queue(_adapter* dev, u8 isfreeall)
++{
++_func_enter_;		
++	_rtw_free_network_queue(dev, isfreeall);
++_func_exit_;			
++}
++
++/*
++	return the wlan_network with the matching addr
++
++	Shall be calle under atomic context... to avoid possible racing condition...
++*/
++struct	wlan_network *rtw_find_network(_queue *scanned_queue, u8 *addr)
++{
++	struct	wlan_network *pnetwork = _rtw_find_network(scanned_queue, addr);
++
++	return pnetwork;
++}
++
++int rtw_is_same_ibss(_adapter *adapter, struct wlan_network *pnetwork)
++{
++	int ret=_TRUE;
++	struct security_priv *psecuritypriv = &adapter->securitypriv;
++
++	if ( (psecuritypriv->dot11PrivacyAlgrthm != _NO_PRIVACY_ ) &&
++		    ( pnetwork->network.Privacy == 0 ) )
++	{
++		ret=_FALSE;
++	}
++	else if((psecuritypriv->dot11PrivacyAlgrthm == _NO_PRIVACY_ ) &&
++		 ( pnetwork->network.Privacy == 1 ) )
++	{
++		ret=_FALSE;
++	}
++	else
++	{
++		ret=_TRUE;
++	}
++	
++	return ret;
++	
++}
++
++inline int is_same_ess(WLAN_BSSID_EX *a, WLAN_BSSID_EX *b);
++inline int is_same_ess(WLAN_BSSID_EX *a, WLAN_BSSID_EX *b)
++{
++	//RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("(%s,%d)(%s,%d)\n",
++	//		a->Ssid.Ssid,a->Ssid.SsidLength,b->Ssid.Ssid,b->Ssid.SsidLength));
++	return (a->Ssid.SsidLength == b->Ssid.SsidLength) 
++		&&  _rtw_memcmp(a->Ssid.Ssid, b->Ssid.Ssid, a->Ssid.SsidLength)==_TRUE;
++}
++
++int is_same_network(WLAN_BSSID_EX *src, WLAN_BSSID_EX *dst)
++{
++	 u16 s_cap, d_cap;
++	 
++_func_enter_;	
++
++#ifdef PLATFORM_OS_XP
++	 if ( ((uint)dst) <= 0x7fffffff || 
++	 	((uint)src) <= 0x7fffffff ||
++	 	((uint)&s_cap) <= 0x7fffffff ||
++	 	((uint)&d_cap) <= 0x7fffffff)
++	{
++		RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("\n@@@@ error address of dst\n"));
++			
++		KeBugCheckEx(0x87110000, (ULONG_PTR)dst, (ULONG_PTR)src,(ULONG_PTR)&s_cap, (ULONG_PTR)&d_cap);
++
++		return _FALSE;
++	}
++#endif
++
++
++	_rtw_memcpy((u8 *)&s_cap, rtw_get_capability_from_ie(src->IEs), 2);
++	_rtw_memcpy((u8 *)&d_cap, rtw_get_capability_from_ie(dst->IEs), 2);
++
++	
++	s_cap = le16_to_cpu(s_cap);
++	d_cap = le16_to_cpu(d_cap);
++	
++_func_exit_;			
++
++	return ((src->Ssid.SsidLength == dst->Ssid.SsidLength) &&
++		//	(src->Configuration.DSConfig == dst->Configuration.DSConfig) &&
++			( (_rtw_memcmp(src->MacAddress, dst->MacAddress, ETH_ALEN)) == _TRUE) &&
++			( (_rtw_memcmp(src->Ssid.Ssid, dst->Ssid.Ssid, src->Ssid.SsidLength)) == _TRUE) &&
++			((s_cap & WLAN_CAPABILITY_IBSS) == 
++			(d_cap & WLAN_CAPABILITY_IBSS)) &&
++			((s_cap & WLAN_CAPABILITY_BSS) == 
++			(d_cap & WLAN_CAPABILITY_BSS)));
++	
++}
++
++struct	wlan_network	* rtw_get_oldest_wlan_network(_queue *scanned_queue)
++{
++	_list	*plist, *phead;
++
++	
++	struct	wlan_network	*pwlan = NULL;
++	struct	wlan_network	*oldest = NULL;
++_func_enter_;		
++	phead = get_list_head(scanned_queue);
++	
++	plist = get_next(phead);
++
++	while(1)
++	{
++		
++		if (rtw_end_of_queue_search(phead,plist)== _TRUE)
++			break;
++		
++		pwlan= LIST_CONTAINOR(plist, struct wlan_network, list);
++
++		if(pwlan->fixed!=_TRUE)
++		{		
++			if (oldest == NULL ||time_after(oldest->last_scanned, pwlan->last_scanned))
++				oldest = pwlan;
++		}
++		
++		plist = get_next(plist);
++	}
++_func_exit_;		
++	return oldest;
++	
++}
++
++static void update_network(WLAN_BSSID_EX *dst, WLAN_BSSID_EX *src,
++	_adapter * padapter, bool update_ie)
++{
++	u8 ss_ori = dst->PhyInfo.SignalStrength;
++	u8 sq_ori = dst->PhyInfo.SignalQuality;
++	long rssi_ori = dst->Rssi;
++
++	u8 ss_smp = src->PhyInfo.SignalStrength;
++	u8 sq_smp = src->PhyInfo.SignalQuality;
++	long rssi_smp = src->Rssi;
++
++	u8 ss_final;
++	u8 sq_final;
++	long rssi_final;
++
++_func_enter_;		
++
++#ifdef CONFIG_ANTENNA_DIVERSITY
++	rtw_hal_antdiv_rssi_compared(padapter, dst, src); //this will update src.Rssi, need consider again
++#endif
++
++	#if defined(DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED) && 1
++	if(strcmp(dst->Ssid.Ssid, DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED) == 0) {
++		DBG_871X(FUNC_ADPT_FMT" %s("MAC_FMT", ch%u) ss_ori:%3u, sq_ori:%3u, rssi_ori:%3ld, ss_smp:%3u, sq_smp:%3u, rssi_smp:%3ld\n"
++			, FUNC_ADPT_ARG(padapter)
++			, src->Ssid.Ssid, MAC_ARG(src->MacAddress), src->Configuration.DSConfig
++			,ss_ori, sq_ori, rssi_ori
++			,ss_smp, sq_smp, rssi_smp
++		);
++	}
++	#endif
++
++	/* The rule below is 1/5 for sample value, 4/5 for history value */
++	if (check_fwstate(&padapter->mlmepriv, _FW_LINKED) && is_same_network(&(padapter->mlmepriv.cur_network.network), src)) {
++		/* Take the recvpriv's value for the connected AP*/
++		ss_final = padapter->recvpriv.signal_strength;
++		sq_final = padapter->recvpriv.signal_qual;
++		/* the rssi value here is undecorated, and will be used for antenna diversity */
++		if(sq_smp != 101) /* from the right channel */
++			rssi_final = (src->Rssi+dst->Rssi*4)/5;
++		else
++			rssi_final = rssi_ori;
++	}
++	else {
++		if(sq_smp != 101) { /* from the right channel */
++			ss_final = ((u32)(src->PhyInfo.SignalStrength)+(u32)(dst->PhyInfo.SignalStrength)*4)/5;
++			sq_final = ((u32)(src->PhyInfo.SignalQuality)+(u32)(dst->PhyInfo.SignalQuality)*4)/5;
++			rssi_final = (src->Rssi+dst->Rssi*4)/5;
++		} else {
++			/* bss info not receving from the right channel, use the original RX signal infos */
++			ss_final = dst->PhyInfo.SignalStrength;
++			sq_final = dst->PhyInfo.SignalQuality;
++			rssi_final = dst->Rssi;
++		}
++		
++	}
++
++	if (update_ie)
++		_rtw_memcpy((u8 *)dst, (u8 *)src, get_WLAN_BSSID_EX_sz(src));
++
++	dst->PhyInfo.SignalStrength = ss_final;
++	dst->PhyInfo.SignalQuality = sq_final;
++	dst->Rssi = rssi_final;
++
++	#if defined(DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED) && 1
++	if(strcmp(dst->Ssid.Ssid, DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED) == 0) {
++		DBG_871X(FUNC_ADPT_FMT" %s("MAC_FMT"), SignalStrength:%u, SignalQuality:%u, RawRSSI:%ld\n"
++			, FUNC_ADPT_ARG(padapter)
++			, dst->Ssid.Ssid, MAC_ARG(dst->MacAddress), dst->PhyInfo.SignalStrength, dst->PhyInfo.SignalQuality, dst->Rssi);
++	}
++	#endif
++
++#if 0 // old codes, may be useful one day...
++//	DBG_871X("update_network: rssi=0x%lx dst->Rssi=%d ,dst->Rssi=0x%lx , src->Rssi=0x%lx",(dst->Rssi+src->Rssi)/2,dst->Rssi,dst->Rssi,src->Rssi);
++	if (check_fwstate(&padapter->mlmepriv, _FW_LINKED) && is_same_network(&(padapter->mlmepriv.cur_network.network), src))
++	{
++	
++		//DBG_871X("b:ssid=%s update_network: src->rssi=0x%d padapter->recvpriv.ui_rssi=%d\n",src->Ssid.Ssid,src->Rssi,padapter->recvpriv.signal);
++		if(padapter->recvpriv.signal_qual_data.total_num++ >= PHY_LINKQUALITY_SLID_WIN_MAX)
++	        {
++	              padapter->recvpriv.signal_qual_data.total_num = PHY_LINKQUALITY_SLID_WIN_MAX;
++	              last_evm = padapter->recvpriv.signal_qual_data.elements[padapter->recvpriv.signal_qual_data.index];
++	              padapter->recvpriv.signal_qual_data.total_val -= last_evm;
++	        }
++               	padapter->recvpriv.signal_qual_data.total_val += query_rx_pwr_percentage(src->Rssi);
++
++              	padapter->recvpriv.signal_qual_data.elements[padapter->recvpriv.signal_qual_data.index++] = query_rx_pwr_percentage(src->Rssi);
++                if(padapter->recvpriv.signal_qual_data.index >= PHY_LINKQUALITY_SLID_WIN_MAX)
++                       padapter->recvpriv.signal_qual_data.index = 0;
++
++		//DBG_871X("Total SQ=%d  pattrib->signal_qual= %d\n", padapter->recvpriv.signal_qual_data.total_val, src->Rssi);
++
++		// <1> Showed on UI for user,in percentage.
++		tmpVal = padapter->recvpriv.signal_qual_data.total_val/padapter->recvpriv.signal_qual_data.total_num;
++                padapter->recvpriv.signal=(u8)tmpVal;//Link quality
++
++		src->Rssi= translate_percentage_to_dbm(padapter->recvpriv.signal) ;
++	}
++	else{
++//	DBG_871X("ELSE:ssid=%s update_network: src->rssi=0x%d dst->rssi=%d\n",src->Ssid.Ssid,src->Rssi,dst->Rssi);
++		src->Rssi=(src->Rssi +dst->Rssi)/2;//dBM
++	}	
++
++//	DBG_871X("a:update_network: src->rssi=0x%d padapter->recvpriv.ui_rssi=%d\n",src->Rssi,padapter->recvpriv.signal);
++
++#endif
++
++_func_exit_;		
++}
++
++static void update_current_network(_adapter *adapter, WLAN_BSSID_EX *pnetwork)
++{
++	struct	mlme_priv	*pmlmepriv = &(adapter->mlmepriv);
++	
++_func_enter_;		
++
++#ifdef PLATFORM_OS_XP
++	if ((unsigned long)(&(pmlmepriv->cur_network.network)) < 0x7ffffff)
++	{		
++		KeBugCheckEx(0x87111c1c, (ULONG_PTR)(&(pmlmepriv->cur_network.network)), 0, 0,0);
++	}
++#endif
++
++	if ( (check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) && (is_same_network(&(pmlmepriv->cur_network.network), pnetwork)))
++	{
++		//RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,"Same Network\n");
++
++		//if(pmlmepriv->cur_network.network.IELength<= pnetwork->IELength)
++		{
++			update_network(&(pmlmepriv->cur_network.network), pnetwork,adapter, _TRUE);
++			rtw_update_protection(adapter, (pmlmepriv->cur_network.network.IEs) + sizeof (NDIS_802_11_FIXED_IEs), 
++									pmlmepriv->cur_network.network.IELength);
++		}
++	}
++
++_func_exit_;			
++
++}
++
++
++/*
++
++Caller must hold pmlmepriv->lock first.
++
++
++*/
++void rtw_update_scanned_network(_adapter *adapter, WLAN_BSSID_EX *target)
++{
++	_irqL irqL;
++	_list	*plist, *phead;
++	ULONG	bssid_ex_sz;
++	struct mlme_priv	*pmlmepriv = &(adapter->mlmepriv);
++	_queue	*queue	= &(pmlmepriv->scanned_queue);
++	struct wlan_network	*pnetwork = NULL;
++	struct wlan_network	*oldest = NULL;
++
++_func_enter_;
++
++	_enter_critical_bh(&queue->lock, &irqL);
++	phead = get_list_head(queue);
++	plist = get_next(phead);
++
++	while(1)
++	{
++		if (rtw_end_of_queue_search(phead,plist)== _TRUE)
++			break;
++
++		pnetwork	= LIST_CONTAINOR(plist, struct wlan_network, list);
++
++		if ((unsigned long)(pnetwork) < 0x7ffffff)
++		{
++#ifdef PLATFORM_OS_XP
++			KeBugCheckEx(0x87111c1c, (ULONG_PTR)pnetwork, 0, 0,0);
++#endif
++		}
++
++		if (is_same_network(&(pnetwork->network), target))
++			break;
++
++		if ((oldest == ((struct wlan_network *)0)) ||
++		time_after(oldest->last_scanned, pnetwork->last_scanned))
++			oldest = pnetwork;
++
++		plist = get_next(plist);
++
++	}
++	
++	
++	/* If we didn't find a match, then get a new network slot to initialize
++	 * with this beacon's information */
++	if (rtw_end_of_queue_search(phead,plist)== _TRUE) {
++		
++		if (_rtw_queue_empty(&(pmlmepriv->free_bss_pool)) == _TRUE) {
++			/* If there are no more slots, expire the oldest */
++			//list_del_init(&oldest->list);
++			pnetwork = oldest;
++
++#ifdef CONFIG_ANTENNA_DIVERSITY
++			//target->PhyInfo.Optimum_antenna = pHalData->CurAntenna;//optimum_antenna=>For antenna diversity
++			rtw_hal_get_def_var(adapter, HAL_DEF_CURRENT_ANTENNA, &(target->PhyInfo.Optimum_antenna));
++#endif
++			_rtw_memcpy(&(pnetwork->network), target,  get_WLAN_BSSID_EX_sz(target));
++			//pnetwork->last_scanned = rtw_get_current_time();
++			// variable initialize
++			pnetwork->fixed = _FALSE;
++			pnetwork->last_scanned = rtw_get_current_time();
++
++			pnetwork->network_type = 0;	
++			pnetwork->aid=0;		
++			pnetwork->join_res=0;
++
++			/* bss info not receving from the right channel */
++			if (pnetwork->network.PhyInfo.SignalQuality == 101)
++				pnetwork->network.PhyInfo.SignalQuality = 0;
++		}
++		else {
++			/* Otherwise just pull from the free list */
++
++			pnetwork = rtw_alloc_network(pmlmepriv); // will update scan_time
++
++			if(pnetwork==NULL){ 
++				RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("\n\n\nsomething wrong here\n\n\n"));
++				goto exit;
++			}
++
++			bssid_ex_sz = get_WLAN_BSSID_EX_sz(target);
++			target->Length = bssid_ex_sz;
++#ifdef CONFIG_ANTENNA_DIVERSITY
++			//target->PhyInfo.Optimum_antenna = pHalData->CurAntenna;
++			rtw_hal_get_def_var(adapter, HAL_DEF_CURRENT_ANTENNA, &(target->PhyInfo.Optimum_antenna));
++#endif
++			_rtw_memcpy(&(pnetwork->network), target, bssid_ex_sz );
++
++			pnetwork->last_scanned = rtw_get_current_time();
++
++			/* bss info not receving from the right channel */
++			if (pnetwork->network.PhyInfo.SignalQuality == 101)
++				pnetwork->network.PhyInfo.SignalQuality = 0;
++
++			rtw_list_insert_tail(&(pnetwork->list),&(queue->queue)); 
++
++		}
++	}
++	else {
++		/* we have an entry and we are going to update it. But this entry may
++		 * be already expired. In this case we do the same as we found a new 
++		 * net and call the new_net handler
++		 */
++		bool update_ie = _TRUE;
++
++		pnetwork->last_scanned = rtw_get_current_time();
++
++		//target.Reserved[0]==1, means that scaned network is a bcn frame.
++		if((pnetwork->network.IELength>target->IELength) && (target->Reserved[0]==1))
++			update_ie = _FALSE;
++
++		update_network(&(pnetwork->network), target,adapter, update_ie);
++	}
++
++exit:
++	_exit_critical_bh(&queue->lock, &irqL);
++
++_func_exit_;
++}
++
++void rtw_add_network(_adapter *adapter, WLAN_BSSID_EX *pnetwork);
++void rtw_add_network(_adapter *adapter, WLAN_BSSID_EX *pnetwork)
++{
++	_irqL irqL;
++	struct	mlme_priv	*pmlmepriv = &(((_adapter *)adapter)->mlmepriv);
++	//_queue	*queue	= &(pmlmepriv->scanned_queue);
++
++_func_enter_;		
++
++	//_enter_critical_bh(&queue->lock, &irqL);
++
++	#if defined(CONFIG_P2P) && defined(CONFIG_P2P_REMOVE_GROUP_INFO)
++	rtw_WLAN_BSSID_EX_remove_p2p_attr(pnetwork, P2P_ATTR_GROUP_INFO);
++	#endif
++	
++	update_current_network(adapter, pnetwork);
++	
++	rtw_update_scanned_network(adapter, pnetwork);
++
++	//_exit_critical_bh(&queue->lock, &irqL);
++	
++_func_exit_;		
++}
++
++//select the desired network based on the capability of the (i)bss.
++// check items: (1) security
++//			   (2) network_type
++//			   (3) WMM
++//			   (4) HT
++//                     (5) others
++int rtw_is_desired_network(_adapter *adapter, struct wlan_network *pnetwork);
++int rtw_is_desired_network(_adapter *adapter, struct wlan_network *pnetwork)
++{
++	struct security_priv *psecuritypriv = &adapter->securitypriv;
++	struct mlme_priv *pmlmepriv = &adapter->mlmepriv;
++	u32 desired_encmode;
++	u32 privacy;
++
++	//u8 wps_ie[512];
++	uint wps_ielen;
++
++	int bselected = _TRUE;
++	
++	desired_encmode = psecuritypriv->ndisencryptstatus;
++	privacy = pnetwork->network.Privacy;
++
++	if(check_fwstate(pmlmepriv, WIFI_UNDER_WPS))
++	{
++		if(rtw_get_wps_ie(pnetwork->network.IEs+_FIXED_IE_LENGTH_, pnetwork->network.IELength-_FIXED_IE_LENGTH_, NULL, &wps_ielen)!=NULL)
++		{
++			return _TRUE;
++		}
++		else
++		{	
++			return _FALSE;
++		}	
++	}
++	if (adapter->registrypriv.wifi_spec == 1) //for  correct flow of 8021X  to do....
++	{
++		u8 *p=NULL;
++		uint ie_len=0;
++
++		if ((desired_encmode == Ndis802_11EncryptionDisabled) && (privacy != 0))
++	            bselected = _FALSE;
++
++		if ( psecuritypriv->ndisauthtype == Ndis802_11AuthModeWPA2PSK) {
++			p = rtw_get_ie(pnetwork->network.IEs + _BEACON_IE_OFFSET_, _RSN_IE_2_, &ie_len, (pnetwork->network.IELength - _BEACON_IE_OFFSET_));
++			if (p && ie_len>0) {
++				bselected = _TRUE;
++			} else {
++				bselected = _FALSE;
++			}
++		}
++	}
++	
++
++ 	if ((desired_encmode != Ndis802_11EncryptionDisabled) && (privacy == 0)) {
++		DBG_871X("desired_encmode: %d, privacy: %d\n", desired_encmode, privacy);
++		bselected = _FALSE;
++ 	}
++
++	if(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == _TRUE)
++	{
++		if(pnetwork->network.InfrastructureMode != pmlmepriv->cur_network.network.InfrastructureMode)
++			bselected = _FALSE;
++	}	
++		
++
++	return bselected;
++}
++
++/* TODO: Perry : For Power Management */
++void rtw_atimdone_event_callback(_adapter	*adapter , u8 *pbuf)
++{
++
++_func_enter_;		
++	RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("receive atimdone_evet\n"));	
++_func_exit_;			
++	return;	
++}
++
++
++void rtw_survey_event_callback(_adapter	*adapter, u8 *pbuf)
++{
++	_irqL  irqL;
++	u32 len;
++	WLAN_BSSID_EX *pnetwork;
++	struct	mlme_priv	*pmlmepriv = &(adapter->mlmepriv);
++
++_func_enter_;		
++
++	pnetwork = (WLAN_BSSID_EX *)pbuf;
++
++	RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("rtw_survey_event_callback, ssid=%s\n",  pnetwork->Ssid.Ssid));
++
++#ifdef CONFIG_RTL8712
++        //endian_convert
++ 	pnetwork->Length = le32_to_cpu(pnetwork->Length);
++  	pnetwork->Ssid.SsidLength = le32_to_cpu(pnetwork->Ssid.SsidLength);	
++	pnetwork->Privacy =le32_to_cpu( pnetwork->Privacy);
++	pnetwork->Rssi = le32_to_cpu(pnetwork->Rssi);
++	pnetwork->NetworkTypeInUse =le32_to_cpu(pnetwork->NetworkTypeInUse);	
++	pnetwork->Configuration.ATIMWindow = le32_to_cpu(pnetwork->Configuration.ATIMWindow);
++	pnetwork->Configuration.BeaconPeriod = le32_to_cpu(pnetwork->Configuration.BeaconPeriod);
++	pnetwork->Configuration.DSConfig =le32_to_cpu(pnetwork->Configuration.DSConfig);
++	pnetwork->Configuration.FHConfig.DwellTime=le32_to_cpu(pnetwork->Configuration.FHConfig.DwellTime);
++	pnetwork->Configuration.FHConfig.HopPattern=le32_to_cpu(pnetwork->Configuration.FHConfig.HopPattern);
++	pnetwork->Configuration.FHConfig.HopSet=le32_to_cpu(pnetwork->Configuration.FHConfig.HopSet);
++	pnetwork->Configuration.FHConfig.Length=le32_to_cpu(pnetwork->Configuration.FHConfig.Length);	
++	pnetwork->Configuration.Length = le32_to_cpu(pnetwork->Configuration.Length);
++	pnetwork->InfrastructureMode = le32_to_cpu(pnetwork->InfrastructureMode);
++	pnetwork->IELength = le32_to_cpu(pnetwork->IELength);
++#endif	
++
++	len = get_WLAN_BSSID_EX_sz(pnetwork);
++	if(len > (sizeof(WLAN_BSSID_EX)))
++	{
++		RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("\n ****rtw_survey_event_callback: return a wrong bss ***\n"));
++		return;
++	}
++
++
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++
++	// update IBSS_network 's timestamp
++	if ((check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE)) == _TRUE)
++	{
++		//RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,"rtw_survey_event_callback : WIFI_ADHOC_MASTER_STATE \n\n");
++		if(_rtw_memcmp(&(pmlmepriv->cur_network.network.MacAddress), pnetwork->MacAddress, ETH_ALEN))
++		{
++			struct wlan_network* ibss_wlan = NULL;
++			_irqL	irqL;
++			
++			_rtw_memcpy(pmlmepriv->cur_network.network.IEs, pnetwork->IEs, 8);
++			_enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++			ibss_wlan = rtw_find_network(&pmlmepriv->scanned_queue,  pnetwork->MacAddress);
++			if(ibss_wlan)
++			{
++				_rtw_memcpy(ibss_wlan->network.IEs , pnetwork->IEs, 8);			
++				_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);		
++				goto exit;
++			}
++			_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++		}
++	}
++
++	// lock pmlmepriv->lock when you accessing network_q
++	if ((check_fwstate(pmlmepriv, _FW_UNDER_LINKING)) == _FALSE)
++	{		
++   	        if( pnetwork->Ssid.Ssid[0] == 0 )
++		{
++			pnetwork->Ssid.SsidLength = 0;
++		}	
++		rtw_add_network(adapter, pnetwork);
++	}	
++
++exit:	
++		
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++
++_func_exit_;		
++
++	return;	
++}
++
++
++
++void rtw_surveydone_event_callback(_adapter	*adapter, u8 *pbuf)
++{
++	_irqL  irqL;
++	u8 timer_cancelled = _FALSE;
++	struct	mlme_priv	*pmlmepriv = &(adapter->mlmepriv);
++	
++#ifdef CONFIG_MLME_EXT	
++
++	mlmeext_surveydone_event_callback(adapter);
++
++#endif
++
++_func_enter_;			
++
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++	if(pmlmepriv->wps_probe_req_ie)
++	{
++		u32 free_len = pmlmepriv->wps_probe_req_ie_len;
++		pmlmepriv->wps_probe_req_ie_len = 0;
++		rtw_mfree(pmlmepriv->wps_probe_req_ie, free_len);
++		pmlmepriv->wps_probe_req_ie = NULL;			
++	}
++	
++	RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("rtw_surveydone_event_callback: fw_state:%x\n\n", get_fwstate(pmlmepriv)));
++	
++	if (check_fwstate(pmlmepriv,_FW_UNDER_SURVEY))
++	{
++		//u8 timer_cancelled;
++
++		timer_cancelled = _TRUE;
++		//_cancel_timer(&pmlmepriv->scan_to_timer, &timer_cancelled);
++		
++		_clr_fwstate_(pmlmepriv, _FW_UNDER_SURVEY);
++	}
++	else {
++	
++		RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("nic status =%x, survey done event comes too late!\n", get_fwstate(pmlmepriv)));	
++	}
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++
++	if(timer_cancelled)
++		_cancel_timer(&pmlmepriv->scan_to_timer, &timer_cancelled);
++
++
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++
++	#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS
++	rtw_set_signal_stat_timer(&adapter->recvpriv);
++	#endif
++
++	if(pmlmepriv->to_join == _TRUE)
++	{
++		if((check_fwstate(pmlmepriv, WIFI_ADHOC_STATE)==_TRUE) )
++		{
++			if(check_fwstate(pmlmepriv, _FW_LINKED)==_FALSE)
++			{
++				set_fwstate(pmlmepriv, _FW_UNDER_LINKING);	
++				
++		   		if(rtw_select_and_join_from_scanned_queue(pmlmepriv)==_SUCCESS)
++		   		{
++		       			_set_timer(&pmlmepriv->assoc_timer, MAX_JOIN_TIMEOUT );	 
++                  		}
++		   		else	
++		  		{
++					WLAN_BSSID_EX    *pdev_network = &(adapter->registrypriv.dev_network); 			
++					u8 *pibss = adapter->registrypriv.dev_network.MacAddress;
++
++					//pmlmepriv->fw_state ^= _FW_UNDER_SURVEY;//because don't set assoc_timer
++					_clr_fwstate_(pmlmepriv, _FW_UNDER_SURVEY);
++
++					RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("switching to adhoc master\n"));
++				
++					_rtw_memset(&pdev_network->Ssid, 0, sizeof(NDIS_802_11_SSID));
++					_rtw_memcpy(&pdev_network->Ssid, &pmlmepriv->assoc_ssid, sizeof(NDIS_802_11_SSID));
++	
++					rtw_update_registrypriv_dev_network(adapter);
++					rtw_generate_random_ibss(pibss);
++
++                       			pmlmepriv->fw_state = WIFI_ADHOC_MASTER_STATE;
++			
++					if(rtw_createbss_cmd(adapter)!=_SUCCESS)
++					{
++	                     		RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("Error=>rtw_createbss_cmd status FAIL\n"));						
++					}	
++
++			     		pmlmepriv->to_join = _FALSE;
++		   		}
++		 	}
++		}
++		else
++		{
++			int s_ret;
++			set_fwstate(pmlmepriv, _FW_UNDER_LINKING);
++			pmlmepriv->to_join = _FALSE;
++			if(_SUCCESS == (s_ret=rtw_select_and_join_from_scanned_queue(pmlmepriv)))
++			{
++	     		     _set_timer(&pmlmepriv->assoc_timer, MAX_JOIN_TIMEOUT);	 
++			}
++			else if(s_ret == 2)//there is no need to wait for join
++			{
++				_clr_fwstate_(pmlmepriv, _FW_UNDER_LINKING);
++				rtw_indicate_connect(adapter);
++			}
++			else
++			{
++				DBG_871X("try_to_join, but select scanning queue fail, to_roaming:%d\n", rtw_to_roaming(adapter));
++				#ifdef CONFIG_LAYER2_ROAMING
++				if (rtw_to_roaming(adapter) != 0) {
++					if( --pmlmepriv->to_roaming == 0
++						|| _SUCCESS != rtw_sitesurvey_cmd(adapter, &pmlmepriv->assoc_ssid, 1, NULL, 0)
++					) {
++						rtw_set_roaming(adapter, 0);
++#ifdef CONFIG_INTEL_WIDI
++						if(adapter->mlmepriv.widi_state == INTEL_WIDI_STATE_ROAMING)
++						{
++							_rtw_memset(pmlmepriv->sa_ext, 0x00, L2SDTA_SERVICE_VE_LEN);
++							intel_widi_wk_cmd(adapter, INTEL_WIDI_LISTEN_WK, NULL);
++							DBG_871X("change to widi listen\n");
++						}
++#endif // CONFIG_INTEL_WIDI
++						rtw_free_assoc_resources(adapter, 1);
++						rtw_indicate_disconnect(adapter);
++					} else {
++						pmlmepriv->to_join = _TRUE;
++					}
++				}
++				#endif
++				_clr_fwstate_(pmlmepriv, _FW_UNDER_LINKING);
++			}
++		}
++	}
++
++	indicate_wx_scan_complete_event(adapter);
++	//DBG_871X("scan complete in %dms\n",rtw_get_passing_time_ms(pmlmepriv->scan_start_time));
++
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++
++#ifdef CONFIG_P2P_PS
++	if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) {
++		p2p_ps_wk_cmd(adapter, P2P_PS_SCAN_DONE, 0);
++	}
++#endif // CONFIG_P2P_PS
++
++	rtw_os_xmit_schedule(adapter);
++#ifdef CONFIG_CONCURRENT_MODE
++	rtw_os_xmit_schedule(adapter->pbuddy_adapter);
++#endif
++#ifdef CONFIG_DUALMAC_CONCURRENT
++	dc_resume_xmit(adapter);
++#endif
++
++#ifdef CONFIG_DRVEXT_MODULE_WSC
++	drvext_surveydone_callback(&adapter->drvextpriv);
++#endif
++
++#ifdef DBG_CONFIG_ERROR_DETECT
++#ifdef CONFIG_INTEL_WIDI
++	if (adapter->mlmepriv.widi_state == INTEL_WIDI_STATE_NONE)
++#endif
++	{
++		struct mlme_ext_priv *pmlmeext = &adapter->mlmeextpriv;		
++		if(pmlmeext->sitesurvey_res.bss_cnt == 0){
++			rtw_hal_sreset_reset(adapter);
++		}
++	}
++#endif
++
++#ifdef CONFIG_IOCTL_CFG80211
++	rtw_cfg80211_surveydone_event_callback(adapter);
++#endif //CONFIG_IOCTL_CFG80211
++
++_func_exit_;	
++
++}
++
++void rtw_dummy_event_callback(_adapter *adapter , u8 *pbuf)
++{
++
++}
++
++void rtw_fwdbg_event_callback(_adapter *adapter , u8 *pbuf)
++{
++
++}
++
++static void free_scanqueue(struct	mlme_priv *pmlmepriv)
++{
++	_irqL irqL, irqL0;
++	_queue *free_queue = &pmlmepriv->free_bss_pool;
++	_queue *scan_queue = &pmlmepriv->scanned_queue;
++	_list	*plist, *phead, *ptemp;
++	
++_func_enter_;		
++	
++	RT_TRACE(_module_rtl871x_mlme_c_, _drv_notice_, ("+free_scanqueue\n"));
++	_enter_critical_bh(&scan_queue->lock, &irqL0);
++	_enter_critical_bh(&free_queue->lock, &irqL);
++
++	phead = get_list_head(scan_queue);
++	plist = get_next(phead);
++
++	while (plist != phead)
++       {
++		ptemp = get_next(plist);
++		rtw_list_delete(plist);
++		rtw_list_insert_tail(plist, &free_queue->queue);
++		plist =ptemp;
++		pmlmepriv->num_of_scanned --;
++        }
++	
++	_exit_critical_bh(&free_queue->lock, &irqL);
++	_exit_critical_bh(&scan_queue->lock, &irqL0);
++	
++_func_exit_;
++}
++	
++/*
++*rtw_free_assoc_resources: the caller has to lock pmlmepriv->lock
++*/
++void rtw_free_assoc_resources(_adapter *adapter, int lock_scanned_queue)
++{
++	_irqL irqL;
++	struct wlan_network* pwlan = NULL;
++     	struct	mlme_priv *pmlmepriv = &adapter->mlmepriv;
++   	struct	sta_priv *pstapriv = &adapter->stapriv;
++	struct wlan_network *tgt_network = &pmlmepriv->cur_network;
++	
++#ifdef CONFIG_TDLS
++	struct tdls_info *ptdlsinfo = &adapter->tdlsinfo;
++#endif //CONFIG_TDLS	
++_func_enter_;			
++
++	RT_TRACE(_module_rtl871x_mlme_c_, _drv_notice_, ("+rtw_free_assoc_resources\n"));
++	RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("tgt_network->network.MacAddress="MAC_FMT" ssid=%s\n",
++		MAC_ARG(tgt_network->network.MacAddress), tgt_network->network.Ssid.Ssid));
++
++	if(check_fwstate( pmlmepriv, WIFI_STATION_STATE|WIFI_AP_STATE))
++	{
++		struct sta_info* psta;
++		
++		psta = rtw_get_stainfo(&adapter->stapriv, tgt_network->network.MacAddress);
++
++#ifdef CONFIG_TDLS
++		if(ptdlsinfo->setup_state != TDLS_STATE_NONE)
++		{
++			rtw_tdls_cmd(adapter, myid(&(adapter->eeprompriv)), TDLS_RS_RCR);
++			rtw_reset_tdls_info(adapter);
++			rtw_free_all_stainfo(adapter);
++			_enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL);
++		}
++		else
++#endif //CONFIG_TDLS
++		{
++			_enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL);
++			rtw_free_stainfo(adapter,  psta);
++		}
++
++		_exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL);
++		
++	}
++
++	if(check_fwstate( pmlmepriv, WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE|WIFI_AP_STATE))
++	{
++		struct sta_info* psta;
++	
++		rtw_free_all_stainfo(adapter);
++
++		psta = rtw_get_bcmc_stainfo(adapter);
++		_enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL);		
++		rtw_free_stainfo(adapter, psta);
++		_exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL);		
++
++		rtw_init_bcmc_stainfo(adapter);	
++	}
++
++	if(lock_scanned_queue)
++		_enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++	
++	pwlan = rtw_find_network(&pmlmepriv->scanned_queue, tgt_network->network.MacAddress);
++	if(pwlan)
++	{
++		pwlan->fixed = _FALSE;
++#ifdef CONFIG_P2P
++		if(!rtw_p2p_chk_state(&adapter->wdinfo, P2P_STATE_NONE))
++		{
++			u32 p2p_ielen=0;
++			u8  *p2p_ie;
++			//u16 capability;
++			u8 *pcap = NULL;
++			u32 capability_len=0;
++
++			//DBG_871X("free disconnecting network\n");
++			//rtw_free_network_nolock(pmlmepriv, pwlan);
++
++			if((p2p_ie=rtw_get_p2p_ie(pwlan->network.IEs+_FIXED_IE_LENGTH_, pwlan->network.IELength-_FIXED_IE_LENGTH_, NULL, &p2p_ielen)))
++			{
++				pcap = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_CAPABILITY, NULL, &capability_len);
++				if(pcap && capability_len==2)
++				{
++					u16 cap = *(u16*)pcap ;
++					*(u16*)pcap = cap&0x00ff;//clear group capability when free this network
++				}
++			}
++
++			rtw_set_scan_deny(adapter, 2000);
++			//rtw_clear_scan_deny(adapter);
++		}
++#endif //CONFIG_P2P
++	}
++	else
++	{
++		RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("rtw_free_assoc_resources : pwlan== NULL \n\n"));
++	}
++
++
++	if((check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) && (adapter->stapriv.asoc_sta_count== 1))
++		/*||check_fwstate(pmlmepriv, WIFI_STATION_STATE)*/)
++	{
++		rtw_free_network_nolock(pmlmepriv, pwlan);
++	}
++
++	if(lock_scanned_queue)
++		_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++	
++	adapter->securitypriv.key_mask = 0;
++
++_func_exit_;
++	
++}
++
++/*
++*rtw_indicate_connect: the caller has to lock pmlmepriv->lock
++*/
++void rtw_indicate_connect(_adapter *padapter)
++{
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	struct xmit_priv	*pxmitpriv = &padapter->xmitpriv;
++	
++_func_enter_;
++
++	RT_TRACE(_module_rtl871x_mlme_c_, _drv_err_, ("+rtw_indicate_connect\n"));
++ 
++	pmlmepriv->to_join = _FALSE;
++
++	if(!check_fwstate(&padapter->mlmepriv, _FW_LINKED)) 
++	{
++
++#ifdef CONFIG_SW_ANTENNA_DIVERSITY
++	rtw_hal_set_hwreg(padapter, HW_VAR_ANTENNA_DIVERSITY_LINK, 0);
++#endif
++	set_fwstate(pmlmepriv, _FW_LINKED);
++
++	rtw_led_control(padapter, LED_CTL_LINK);
++
++#ifdef CONFIG_DRVEXT_MODULE
++	if(padapter->drvextpriv.enable_wpa)
++	{
++		indicate_l2_connect(padapter);
++	}
++	else
++#endif
++	{
++		rtw_os_indicate_connect(padapter);
++	}
++
++	}
++
++	rtw_set_roaming(padapter, 0);
++
++#ifdef CONFIG_INTEL_WIDI
++	if(padapter->mlmepriv.widi_state == INTEL_WIDI_STATE_ROAMING)
++	{
++		_rtw_memset(pmlmepriv->sa_ext, 0x00, L2SDTA_SERVICE_VE_LEN);
++		intel_widi_wk_cmd(padapter, INTEL_WIDI_LISTEN_WK, NULL);
++		DBG_871X("change to widi listen\n");
++	}
++#endif // CONFIG_INTEL_WIDI
++
++	rtw_set_scan_deny(padapter, 3000);
++
++	RT_TRACE(_module_rtl871x_mlme_c_, _drv_err_, ("-rtw_indicate_connect: fw_state=0x%08x\n", get_fwstate(pmlmepriv)));
++ 
++_func_exit_;
++
++}
++
++
++/*
++*rtw_indicate_disconnect: the caller has to lock pmlmepriv->lock
++*/
++void rtw_indicate_disconnect( _adapter *padapter )
++{
++	struct	mlme_priv *pmlmepriv = &padapter->mlmepriv;	
++
++_func_enter_;	
++	
++	RT_TRACE(_module_rtl871x_mlme_c_, _drv_err_, ("+rtw_indicate_disconnect\n"));
++
++	_clr_fwstate_(pmlmepriv, _FW_UNDER_LINKING|WIFI_UNDER_WPS);
++
++	if(rtw_to_roaming(padapter) > 0)
++		_clr_fwstate_(pmlmepriv, _FW_LINKED);
++
++	if(check_fwstate(&padapter->mlmepriv, _FW_LINKED) 
++		|| (rtw_to_roaming(padapter) <= 0)
++	)
++	{
++		rtw_os_indicate_disconnect(padapter);
++
++		//set ips_deny_time to avoid enter IPS before LPS leave
++		padapter->pwrctrlpriv.ips_deny_time = rtw_get_current_time() + rtw_ms_to_systime(3000);
++
++	      _clr_fwstate_(pmlmepriv, _FW_LINKED);
++
++		rtw_led_control(padapter, LED_CTL_NO_LINK);
++
++		rtw_clear_scan_deny(padapter);
++
++	}
++
++#ifdef CONFIG_P2P_PS
++	p2p_ps_wk_cmd(padapter, P2P_PS_DISABLE, 1);
++#endif // CONFIG_P2P_PS
++
++#ifdef CONFIG_LPS
++#ifdef CONFIG_WOWLAN
++	if(padapter->pwrctrlpriv.wowlan_mode==_FALSE)
++#endif //CONFIG_WOWLAN
++	rtw_lps_ctrl_wk_cmd(padapter, LPS_CTRL_DISCONNECT, 1);
++
++#endif
++
++_func_exit_;	
++}
++
++inline void rtw_indicate_scan_done( _adapter *padapter, bool aborted)
++{
++	rtw_os_indicate_scan_done(padapter, aborted);
++}
++
++void rtw_scan_abort(_adapter *adapter)
++{
++	u32 cnt=0;
++	u32 start;
++	struct mlme_priv	*pmlmepriv = &(adapter->mlmepriv);
++	struct mlme_ext_priv	*pmlmeext = &(adapter->mlmeextpriv);
++
++	start = rtw_get_current_time();
++	pmlmeext->scan_abort = _TRUE;
++	while (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY)
++		&& rtw_get_passing_time_ms(start) <= 200) {
++
++		if (adapter->bDriverStopped || adapter->bSurpriseRemoved)
++			break;
++
++		DBG_871X(FUNC_NDEV_FMT"fw_state=_FW_UNDER_SURVEY!\n", FUNC_NDEV_ARG(adapter->pnetdev));
++		rtw_msleep_os(20);
++	}
++
++	if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY)) {
++		if (!adapter->bDriverStopped && !adapter->bSurpriseRemoved)
++			DBG_871X(FUNC_NDEV_FMT"waiting for scan_abort time out!\n", FUNC_NDEV_ARG(adapter->pnetdev));
++		#ifdef CONFIG_PLATFORM_MSTAR
++		//_clr_fwstate_(pmlmepriv, _FW_UNDER_SURVEY);
++		set_survey_timer(pmlmeext, 0);
++		_set_timer(&pmlmepriv->scan_to_timer, 50);
++		#endif
++		rtw_indicate_scan_done(adapter, _TRUE);
++	}
++	pmlmeext->scan_abort = _FALSE;
++}
++
++static struct sta_info *rtw_joinbss_update_stainfo(_adapter *padapter, struct wlan_network *pnetwork)
++{
++	int i;
++	struct sta_info *bmc_sta, *psta=NULL;
++	struct recv_reorder_ctrl *preorder_ctrl;
++	struct sta_priv *pstapriv = &padapter->stapriv;	
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++
++	psta = rtw_get_stainfo(pstapriv, pnetwork->network.MacAddress);
++	if(psta==NULL) {
++		psta = rtw_alloc_stainfo(pstapriv, pnetwork->network.MacAddress);
++	}
++
++	if(psta) //update ptarget_sta
++	{
++		DBG_871X("%s\n", __FUNCTION__);
++	
++		psta->aid  = pnetwork->join_res;
++#ifdef CONFIG_CONCURRENT_MODE	
++
++		if(PRIMARY_ADAPTER == padapter->adapter_type)
++			psta->mac_id=0;
++		else
++			psta->mac_id=2;
++#else
++		psta->mac_id=0;
++#endif
++
++		psta->raid = networktype_to_raid(pmlmeext->cur_wireless_mode);
++
++		//security related
++		if(padapter->securitypriv.dot11AuthAlgrthm== dot11AuthAlgrthm_8021X)
++		{						
++			padapter->securitypriv.binstallGrpkey=_FALSE;
++			padapter->securitypriv.busetkipkey=_FALSE;						
++			padapter->securitypriv.bgrpkey_handshake=_FALSE;
++
++			psta->ieee8021x_blocked=_TRUE;
++			psta->dot118021XPrivacy=padapter->securitypriv.dot11PrivacyAlgrthm;
++						
++			_rtw_memset((u8 *)&psta->dot118021x_UncstKey, 0, sizeof (union Keytype));
++						
++			_rtw_memset((u8 *)&psta->dot11tkiprxmickey, 0, sizeof (union Keytype));
++			_rtw_memset((u8 *)&psta->dot11tkiptxmickey, 0, sizeof (union Keytype));
++						
++			_rtw_memset((u8 *)&psta->dot11txpn, 0, sizeof (union pn48));
++#ifdef CONFIG_IEEE80211W
++			_rtw_memset((u8 *)&psta->dot11wtxpn, 0, sizeof (union pn48));
++#endif //CONFIG_IEEE80211W
++			_rtw_memset((u8 *)&psta->dot11rxpn, 0, sizeof (union pn48));	
++		}
++
++		//	Commented by Albert 2012/07/21
++		//	When doing the WPS, the wps_ie_len won't equal to 0
++		//	And the Wi-Fi driver shouldn't allow the data packet to be tramsmitted.
++		if ( padapter->securitypriv.wps_ie_len != 0 )
++		{
++			psta->ieee8021x_blocked=_TRUE;
++			padapter->securitypriv.wps_ie_len = 0;
++		}
++
++
++		//for A-MPDU Rx reordering buffer control for bmc_sta & sta_info
++		//if A-MPDU Rx is enabled, reseting  rx_ordering_ctrl wstart_b(indicate_seq) to default value=0xffff
++		//todo: check if AP can send A-MPDU packets
++		for(i=0; i < 16 ; i++)
++		{
++			//preorder_ctrl = &precvpriv->recvreorder_ctrl[i];
++			preorder_ctrl = &psta->recvreorder_ctrl[i];
++			preorder_ctrl->enable = _FALSE;
++			preorder_ctrl->indicate_seq = 0xffff;
++			#ifdef DBG_RX_SEQ
++			DBG_871X("DBG_RX_SEQ %s:%d indicate_seq:%u \n", __FUNCTION__, __LINE__,
++				preorder_ctrl->indicate_seq);
++			#endif
++			preorder_ctrl->wend_b= 0xffff;
++			preorder_ctrl->wsize_b = 64;//max_ampdu_sz;//ex. 32(kbytes) -> wsize_b=32
++		}
++
++		
++		bmc_sta = rtw_get_bcmc_stainfo(padapter);
++		if(bmc_sta)
++		{
++			for(i=0; i < 16 ; i++)
++			{
++				//preorder_ctrl = &precvpriv->recvreorder_ctrl[i];
++				preorder_ctrl = &bmc_sta->recvreorder_ctrl[i];
++				preorder_ctrl->enable = _FALSE;
++				preorder_ctrl->indicate_seq = 0xffff;
++				#ifdef DBG_RX_SEQ
++				DBG_871X("DBG_RX_SEQ %s:%d indicate_seq:%u \n", __FUNCTION__, __LINE__,
++					preorder_ctrl->indicate_seq);
++				#endif
++				preorder_ctrl->wend_b= 0xffff;
++				preorder_ctrl->wsize_b = 64;//max_ampdu_sz;//ex. 32(kbytes) -> wsize_b=32
++			}
++		}
++
++	
++		//misc.
++		update_sta_info(padapter, psta);
++		
++	}
++					
++	return psta;
++	
++}
++
++//pnetwork : returns from rtw_joinbss_event_callback
++//ptarget_wlan: found from scanned_queue
++static void rtw_joinbss_update_network(_adapter *padapter, struct wlan_network *ptarget_wlan, struct wlan_network  *pnetwork)
++{
++	struct mlme_priv	*pmlmepriv = &(padapter->mlmepriv);	
++	struct wlan_network  *cur_network = &(pmlmepriv->cur_network);
++
++	DBG_871X("%s\n", __FUNCTION__);
++	
++	RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("\nfw_state:%x, BSSID:"MAC_FMT"\n"
++		,get_fwstate(pmlmepriv), MAC_ARG(pnetwork->network.MacAddress)));
++
++				
++	// why not use ptarget_wlan??
++	_rtw_memcpy(&cur_network->network, &pnetwork->network, pnetwork->network.Length);
++
++	cur_network->aid = pnetwork->join_res;
++
++				
++#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS
++	rtw_set_signal_stat_timer(&padapter->recvpriv);
++#endif
++	padapter->recvpriv.signal_strength = ptarget_wlan->network.PhyInfo.SignalStrength;
++	padapter->recvpriv.signal_qual = ptarget_wlan->network.PhyInfo.SignalQuality;
++	//the ptarget_wlan->network.Rssi is raw data, we use ptarget_wlan->network.PhyInfo.SignalStrength instead (has scaled)
++	padapter->recvpriv.rssi = translate_percentage_to_dbm(ptarget_wlan->network.PhyInfo.SignalStrength);
++	#if defined(DBG_RX_SIGNAL_DISPLAY_PROCESSING) && 1
++		DBG_871X(FUNC_ADPT_FMT" signal_strength:%3u, rssi:%3d, signal_qual:%3u"
++			"\n"
++			, FUNC_ADPT_ARG(padapter)
++			, padapter->recvpriv.signal_strength
++			, padapter->recvpriv.rssi
++			, padapter->recvpriv.signal_qual
++	);
++	#endif
++#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS
++	rtw_set_signal_stat_timer(&padapter->recvpriv);
++#endif
++				
++	//update fw_state //will clr _FW_UNDER_LINKING here indirectly
++	switch(pnetwork->network.InfrastructureMode)
++	{	
++		case Ndis802_11Infrastructure:						
++			
++				if(pmlmepriv->fw_state&WIFI_UNDER_WPS)
++					pmlmepriv->fw_state = WIFI_STATION_STATE|WIFI_UNDER_WPS;
++				else
++					pmlmepriv->fw_state = WIFI_STATION_STATE;
++				
++				break;
++		case Ndis802_11IBSS:		
++				pmlmepriv->fw_state = WIFI_ADHOC_STATE;
++				break;
++		default:
++				pmlmepriv->fw_state = WIFI_NULL_STATE;
++				RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("Invalid network_mode\n"));
++				break;
++	}
++
++	rtw_update_protection(padapter, (cur_network->network.IEs) + sizeof (NDIS_802_11_FIXED_IEs), 
++									(cur_network->network.IELength));
++			
++#ifdef CONFIG_80211N_HT			
++	rtw_update_ht_cap(padapter, cur_network->network.IEs, cur_network->network.IELength, (u8) cur_network->network.Configuration.DSConfig);
++#endif
++
++
++}
++
++//Notes: the fucntion could be > passive_level (the same context as Rx tasklet)
++//pnetwork : returns from rtw_joinbss_event_callback
++//ptarget_wlan: found from scanned_queue
++//if join_res > 0, for (fw_state==WIFI_STATION_STATE), we check if  "ptarget_sta" & "ptarget_wlan" exist.	
++//if join_res > 0, for (fw_state==WIFI_ADHOC_STATE), we only check if "ptarget_wlan" exist.
++//if join_res > 0, update "cur_network->network" from "pnetwork->network" if (ptarget_wlan !=NULL).
++//
++//#define REJOIN
++void rtw_joinbss_event_prehandle(_adapter *adapter, u8 *pbuf)
++{
++	_irqL irqL,irqL2;
++	static u8 retry=0;
++	u8 timer_cancelled;
++	struct sta_info *ptarget_sta= NULL, *pcur_sta = NULL;
++   	struct	sta_priv *pstapriv = &adapter->stapriv;
++	struct	mlme_priv	*pmlmepriv = &(adapter->mlmepriv);
++	struct wlan_network 	*pnetwork	= (struct wlan_network *)pbuf;
++	struct wlan_network 	*cur_network = &(pmlmepriv->cur_network);
++	struct wlan_network	*pcur_wlan = NULL, *ptarget_wlan = NULL;
++	unsigned int 		the_same_macaddr = _FALSE;	
++
++_func_enter_;	
++
++#ifdef CONFIG_RTL8712
++       //endian_convert
++	pnetwork->join_res = le32_to_cpu(pnetwork->join_res);
++	pnetwork->network_type = le32_to_cpu(pnetwork->network_type);
++	pnetwork->network.Length = le32_to_cpu(pnetwork->network.Length);
++	pnetwork->network.Ssid.SsidLength = le32_to_cpu(pnetwork->network.Ssid.SsidLength);
++	pnetwork->network.Privacy =le32_to_cpu( pnetwork->network.Privacy);
++	pnetwork->network.Rssi = le32_to_cpu(pnetwork->network.Rssi);
++	pnetwork->network.NetworkTypeInUse =le32_to_cpu(pnetwork->network.NetworkTypeInUse) ;	
++	pnetwork->network.Configuration.ATIMWindow = le32_to_cpu(pnetwork->network.Configuration.ATIMWindow);
++	pnetwork->network.Configuration.BeaconPeriod = le32_to_cpu(pnetwork->network.Configuration.BeaconPeriod);
++	pnetwork->network.Configuration.DSConfig = le32_to_cpu(pnetwork->network.Configuration.DSConfig);
++	pnetwork->network.Configuration.FHConfig.DwellTime=le32_to_cpu(pnetwork->network.Configuration.FHConfig.DwellTime);
++	pnetwork->network.Configuration.FHConfig.HopPattern=le32_to_cpu(pnetwork->network.Configuration.FHConfig.HopPattern);
++	pnetwork->network.Configuration.FHConfig.HopSet=le32_to_cpu(pnetwork->network.Configuration.FHConfig.HopSet);
++	pnetwork->network.Configuration.FHConfig.Length=le32_to_cpu(pnetwork->network.Configuration.FHConfig.Length);	
++	pnetwork->network.Configuration.Length = le32_to_cpu(pnetwork->network.Configuration.Length);
++	pnetwork->network.InfrastructureMode = le32_to_cpu(pnetwork->network.InfrastructureMode);
++	pnetwork->network.IELength = le32_to_cpu(pnetwork->network.IELength );
++#endif
++
++	RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("joinbss event call back received with res=%d\n", pnetwork->join_res));
++
++	rtw_get_encrypt_decrypt_from_registrypriv(adapter);
++	
++
++	if (pmlmepriv->assoc_ssid.SsidLength == 0)
++	{
++		RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("@@@@@   joinbss event call back  for Any SSid\n"));		
++	}
++	else
++	{
++		RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("@@@@@   rtw_joinbss_event_callback for SSid:%s\n", pmlmepriv->assoc_ssid.Ssid));
++	}
++	
++	the_same_macaddr = _rtw_memcmp(pnetwork->network.MacAddress, cur_network->network.MacAddress, ETH_ALEN);
++
++	pnetwork->network.Length = get_WLAN_BSSID_EX_sz(&pnetwork->network);
++	if(pnetwork->network.Length > sizeof(WLAN_BSSID_EX))
++	{
++		RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("\n\n ***joinbss_evt_callback return a wrong bss ***\n\n"));
++		goto ignore_joinbss_callback;
++	}
++
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++	
++	RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("\n rtw_joinbss_event_callback !! _enter_critical \n"));
++
++	if(pnetwork->join_res > 0)
++	{
++		_enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++		retry = 0;
++		if (check_fwstate(pmlmepriv,_FW_UNDER_LINKING) )
++		{
++			//s1. find ptarget_wlan
++			if(check_fwstate(pmlmepriv, _FW_LINKED) )
++			{
++				if(the_same_macaddr == _TRUE)
++				{
++					ptarget_wlan = rtw_find_network(&pmlmepriv->scanned_queue, cur_network->network.MacAddress);					
++				}
++				else
++				{
++					pcur_wlan = rtw_find_network(&pmlmepriv->scanned_queue, cur_network->network.MacAddress);
++					if(pcur_wlan)	pcur_wlan->fixed = _FALSE;
++
++					pcur_sta = rtw_get_stainfo(pstapriv, cur_network->network.MacAddress);
++					if(pcur_sta){
++						_enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL2);
++						rtw_free_stainfo(adapter,  pcur_sta);
++						_exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL2);
++					}
++
++					ptarget_wlan = rtw_find_network(&pmlmepriv->scanned_queue, pnetwork->network.MacAddress);
++					if(check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _TRUE){
++						if(ptarget_wlan)	ptarget_wlan->fixed = _TRUE;			
++					}
++				}
++
++			}
++			else
++			{
++				ptarget_wlan = rtw_find_network(&pmlmepriv->scanned_queue, pnetwork->network.MacAddress);
++				if(check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _TRUE){
++					if(ptarget_wlan)	ptarget_wlan->fixed = _TRUE;			
++				}
++			}
++		
++			//s2. update cur_network 
++			if(ptarget_wlan)
++			{			
++				rtw_joinbss_update_network(adapter, ptarget_wlan, pnetwork);
++			}
++			else
++			{
++				RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("Can't find ptarget_wlan when joinbss_event callback\n"));
++				_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++				goto ignore_joinbss_callback;
++			}
++			
++			
++			//s3. find ptarget_sta & update ptarget_sta after update cur_network only for station mode 
++			if(check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _TRUE)
++			{
++				ptarget_sta = rtw_joinbss_update_stainfo(adapter, pnetwork);
++				if(ptarget_sta==NULL)
++				{
++					RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("Can't update stainfo when joinbss_event callback\n"));
++					_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++					goto ignore_joinbss_callback;
++				}
++			}	
++					
++			//s4. indicate connect			
++			if(check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _TRUE)
++			{
++				rtw_indicate_connect(adapter);
++			}
++			else
++			{
++				//adhoc mode will rtw_indicate_connect when rtw_stassoc_event_callback
++				RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("adhoc mode, fw_state:%x", get_fwstate(pmlmepriv)));
++			}
++
++
++			//s5. Cancle assoc_timer					
++			_cancel_timer(&pmlmepriv->assoc_timer, &timer_cancelled);
++			
++			RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("Cancle assoc_timer\n"));
++				
++		}
++		else
++		{
++			RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("rtw_joinbss_event_callback err: fw_state:%x", get_fwstate(pmlmepriv)));	
++			_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++			goto ignore_joinbss_callback;
++		}
++		
++		_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++				
++	}
++	else if(pnetwork->join_res == -4) 
++	{
++		rtw_reset_securitypriv(adapter);
++		_set_timer(&pmlmepriv->assoc_timer, 1);					
++
++		//rtw_free_assoc_resources(adapter, 1);
++
++		if((check_fwstate(pmlmepriv, _FW_UNDER_LINKING)) == _TRUE)
++		{		
++			RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("fail! clear _FW_UNDER_LINKING ^^^fw_state=%x\n", get_fwstate(pmlmepriv)));
++			_clr_fwstate_(pmlmepriv, _FW_UNDER_LINKING);
++		}	
++		
++	}
++	else //if join_res < 0 (join fails), then try again
++	{
++	
++		#ifdef REJOIN
++		res = _FAIL;
++		if(retry < 2) {
++			res = rtw_select_and_join_from_scanned_queue(pmlmepriv);
++			RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("rtw_select_and_join_from_scanned_queue again! res:%d\n",res));
++		}
++
++		 if(res == _SUCCESS)
++		{
++			//extend time of assoc_timer
++			_set_timer(&pmlmepriv->assoc_timer, MAX_JOIN_TIMEOUT);
++			retry++;
++		}
++		else if(res == 2)//there is no need to wait for join
++		{
++			_clr_fwstate_(pmlmepriv, _FW_UNDER_LINKING);
++			rtw_indicate_connect(adapter);
++		}	
++		else
++		{
++			RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("Set Assoc_Timer = 1; can't find match ssid in scanned_q \n"));
++		#endif
++			
++			_set_timer(&pmlmepriv->assoc_timer, 1);
++			//rtw_free_assoc_resources(adapter, 1);
++			_clr_fwstate_(pmlmepriv, _FW_UNDER_LINKING);
++			
++		#ifdef REJOIN
++			retry = 0;	
++		}
++		#endif
++	}
++
++ignore_joinbss_callback:
++
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++	_func_exit_;	
++}
++
++void rtw_joinbss_event_callback(_adapter *adapter, u8 *pbuf)
++{
++	struct wlan_network 	*pnetwork	= (struct wlan_network *)pbuf;
++
++_func_enter_;
++
++	mlmeext_joinbss_event_callback(adapter, pnetwork->join_res);
++
++	rtw_os_xmit_schedule(adapter);
++
++#ifdef CONFIG_CONCURRENT_MODE	
++	rtw_os_xmit_schedule(adapter->pbuddy_adapter);
++#endif
++
++#ifdef CONFIG_DUALMAC_CONCURRENT
++	dc_resume_xmit(adapter);
++#endif
++
++_func_exit_;
++}
++
++void rtw_stassoc_event_callback(_adapter *adapter, u8 *pbuf)
++{
++	_irqL irqL;	
++	struct sta_info *psta;
++	struct mlme_priv *pmlmepriv = &(adapter->mlmepriv);
++	struct stassoc_event	*pstassoc	= (struct stassoc_event*)pbuf;
++	struct wlan_network 	*cur_network = &(pmlmepriv->cur_network);
++	struct wlan_network	*ptarget_wlan = NULL;
++
++_func_enter_;	
++	
++	if(rtw_access_ctrl(adapter, pstassoc->macaddr) == _FALSE)
++		return;
++
++#if defined (CONFIG_AP_MODE) && defined (CONFIG_NATIVEAP_MLME)
++	if(check_fwstate(pmlmepriv, WIFI_AP_STATE))
++	{
++		psta = rtw_get_stainfo(&adapter->stapriv, pstassoc->macaddr);	
++		if(psta)
++		{
++#ifdef CONFIG_IOCTL_CFG80211
++#ifdef COMPAT_KERNEL_RELEASE
++
++#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37)) || defined(CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER)
++			u8 *passoc_req = NULL;
++			u32 assoc_req_len;
++
++			_enter_critical_bh(&psta->lock, &irqL);
++			if(psta->passoc_req && psta->assoc_req_len>0)
++			{				
++				passoc_req = rtw_zmalloc(psta->assoc_req_len);
++				if(passoc_req)
++				{
++					assoc_req_len = psta->assoc_req_len;
++					_rtw_memcpy(passoc_req, psta->passoc_req, assoc_req_len);
++					
++					rtw_mfree(psta->passoc_req , psta->assoc_req_len);
++					psta->passoc_req = NULL;
++					psta->assoc_req_len = 0;
++				}
++			}			
++			_exit_critical_bh(&psta->lock, &irqL);
++
++			if(passoc_req && assoc_req_len>0)
++			{
++				rtw_cfg80211_indicate_sta_assoc(adapter, passoc_req, assoc_req_len);
++
++				rtw_mfree(passoc_req, assoc_req_len);
++			}
++#endif //(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37)) || defined(CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER)
++#endif //CONFIG_IOCTL_CFG80211	
++
++			//bss_cap_update_on_sta_join(adapter, psta);
++			//sta_info_update(adapter, psta);
++			ap_sta_info_defer_update(adapter, psta);
++		}	
++		
++		goto exit;
++	}	
++#endif	
++
++	psta = rtw_get_stainfo(&adapter->stapriv, pstassoc->macaddr);	
++	if( psta != NULL)
++	{
++		//the sta have been in sta_info_queue => do nothing 
++		
++		RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("Error: rtw_stassoc_event_callback: sta has been in sta_hash_queue \n"));
++		
++		goto exit; //(between drv has received this event before and  fw have not yet to set key to CAM_ENTRY)
++	}
++
++	psta = rtw_alloc_stainfo(&adapter->stapriv, pstassoc->macaddr);	
++	if (psta == NULL) {
++		RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("Can't alloc sta_info when rtw_stassoc_event_callback\n"));
++		goto exit;
++	}	
++	
++	//to do : init sta_info variable
++	psta->qos_option = 0;
++	psta->mac_id = (uint)pstassoc->cam_id;
++	//psta->aid = (uint)pstassoc->cam_id;
++	
++	if(adapter->securitypriv.dot11AuthAlgrthm==dot11AuthAlgrthm_8021X)
++		psta->dot118021XPrivacy = adapter->securitypriv.dot11PrivacyAlgrthm;
++
++	psta->ieee8021x_blocked = _FALSE;		
++	
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++
++	if ( (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE)==_TRUE ) || 
++		(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE)==_TRUE ) )
++	{
++		if(adapter->stapriv.asoc_sta_count== 2)
++		{
++			_enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++			ptarget_wlan = rtw_find_network(&pmlmepriv->scanned_queue, cur_network->network.MacAddress);
++			if(ptarget_wlan)	ptarget_wlan->fixed = _TRUE;
++			_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++			// a sta + bc/mc_stainfo (not Ibss_stainfo)
++			rtw_indicate_connect(adapter);
++		}
++	}
++
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++
++
++	mlmeext_sta_add_event_callback(adapter, psta);
++	
++#ifdef CONFIG_RTL8711
++	//submit SetStaKey_cmd to tell fw, fw will allocate an CAM entry for this sta	
++	rtw_setstakey_cmd(adapter, (unsigned char*)psta, _FALSE);
++#endif
++		
++exit:
++	
++_func_exit_;	
++
++}
++
++void rtw_stadel_event_callback(_adapter *adapter, u8 *pbuf)
++{
++	_irqL irqL,irqL2;	
++	struct sta_info *psta;
++	struct wlan_network* pwlan = NULL;
++	WLAN_BSSID_EX    *pdev_network=NULL;
++	u8* pibss = NULL;
++	struct	mlme_priv	*pmlmepriv = &(adapter->mlmepriv);
++	struct 	stadel_event *pstadel	= (struct stadel_event*)pbuf;
++   	struct	sta_priv *pstapriv = &adapter->stapriv;
++	struct wlan_network *tgt_network = &(pmlmepriv->cur_network);
++	
++_func_enter_;	
++
++        if(check_fwstate(pmlmepriv, WIFI_AP_STATE))
++        {
++#ifdef CONFIG_IOCTL_CFG80211
++#ifdef COMPAT_KERNEL_RELEASE
++
++#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37)) || defined(CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER)
++		rtw_cfg80211_indicate_sta_disassoc(adapter, pstadel->macaddr, *(u16*)pstadel->rsvd);
++#endif //(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37)) || defined(CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER)
++#endif //CONFIG_IOCTL_CFG80211
++
++		return;
++        }
++
++
++	mlmeext_sta_del_event_callback(adapter);
++
++	_enter_critical_bh(&pmlmepriv->lock, &irqL2);
++
++	if(check_fwstate(pmlmepriv, WIFI_STATION_STATE) )
++	{
++		#ifdef CONFIG_LAYER2_ROAMING
++		if (rtw_to_roaming(adapter) > 0)
++			pmlmepriv->to_roaming--; /* this stadel_event is caused by roaming, decrease to_roaming */
++		else if (rtw_to_roaming(adapter) == 0)
++			rtw_set_roaming(adapter, adapter->registrypriv.max_roaming_times);
++#ifdef CONFIG_INTEL_WIDI
++		if(adapter->mlmepriv.widi_state != INTEL_WIDI_STATE_CONNECTED)
++#endif // CONFIG_INTEL_WIDI
++		if(*((unsigned short *)(pstadel->rsvd)) != WLAN_REASON_EXPIRATION_CHK)
++			rtw_set_roaming(adapter, 0); /* don't roam */
++		#endif
++
++		rtw_free_uc_swdec_pending_queue(adapter);
++
++		rtw_free_assoc_resources(adapter, 1);
++		rtw_indicate_disconnect(adapter);
++		_enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++		// remove the network entry in scanned_queue
++		pwlan = rtw_find_network(&pmlmepriv->scanned_queue, tgt_network->network.MacAddress);	
++		if (pwlan) {			
++			pwlan->fixed = _FALSE;
++			rtw_free_network_nolock(pmlmepriv, pwlan);
++		}
++		_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++
++		_rtw_roaming(adapter, tgt_network);
++		
++#ifdef CONFIG_INTEL_WIDI
++		if (!rtw_to_roaming(adapter))
++			process_intel_widi_disconnect(adapter, 1);
++#endif // CONFIG_INTEL_WIDI
++	}
++
++	if ( check_fwstate(pmlmepriv,WIFI_ADHOC_MASTER_STATE) || 
++	      check_fwstate(pmlmepriv,WIFI_ADHOC_STATE))
++	{
++		psta = rtw_get_stainfo(&adapter->stapriv, pstadel->macaddr);
++		
++		_enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL);
++		rtw_free_stainfo(adapter,  psta);
++		_exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL);
++		
++		if(adapter->stapriv.asoc_sta_count== 1) //a sta + bc/mc_stainfo (not Ibss_stainfo)
++		{ 
++			//rtw_indicate_disconnect(adapter);//removed@20091105
++			_enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++			//free old ibss network
++			//pwlan = rtw_find_network(&pmlmepriv->scanned_queue, pstadel->macaddr);
++			pwlan = rtw_find_network(&pmlmepriv->scanned_queue, tgt_network->network.MacAddress);
++			if(pwlan)	
++			{
++				pwlan->fixed = _FALSE;
++				rtw_free_network_nolock(pmlmepriv, pwlan); 
++			}
++			_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++			//re-create ibss
++			pdev_network = &(adapter->registrypriv.dev_network);			
++			pibss = adapter->registrypriv.dev_network.MacAddress;
++
++			_rtw_memcpy(pdev_network, &tgt_network->network, get_WLAN_BSSID_EX_sz(&tgt_network->network));
++			
++			_rtw_memset(&pdev_network->Ssid, 0, sizeof(NDIS_802_11_SSID));
++			_rtw_memcpy(&pdev_network->Ssid, &pmlmepriv->assoc_ssid, sizeof(NDIS_802_11_SSID));
++	
++			rtw_update_registrypriv_dev_network(adapter);			
++
++			rtw_generate_random_ibss(pibss);
++			
++			if(check_fwstate(pmlmepriv,WIFI_ADHOC_STATE))
++			{
++				set_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE);
++				_clr_fwstate_(pmlmepriv, WIFI_ADHOC_STATE);
++			}
++
++			if(rtw_createbss_cmd(adapter)!=_SUCCESS)
++			{
++
++				RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_err_,("***Error=>stadel_event_callback: rtw_createbss_cmd status FAIL*** \n "));										
++
++			}
++
++			
++		}
++		
++	}
++	
++	_exit_critical_bh(&pmlmepriv->lock, &irqL2);
++	
++_func_exit_;	
++
++}
++
++
++void rtw_cpwm_event_callback(PADAPTER padapter, u8 *pbuf)
++{
++#ifdef CONFIG_LPS_LCLK
++	struct reportpwrstate_parm *preportpwrstate;
++#endif
++
++_func_enter_;
++
++	RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("rtw_cpwm_event_callback !!!\n"));
++#ifdef CONFIG_LPS_LCLK
++	preportpwrstate = (struct reportpwrstate_parm*)pbuf;
++	preportpwrstate->state |= (u8)(padapter->pwrctrlpriv.cpwm_tog + 0x80);
++	cpwm_int_hdl(padapter, preportpwrstate);
++#endif
++
++_func_exit_;
++
++}
++
++/*
++* _rtw_join_timeout_handler - Timeout/faliure handler for CMD JoinBss
++* @adapter: pointer to _adapter structure
++*/
++void _rtw_join_timeout_handler (_adapter *adapter)
++{
++	_irqL irqL;
++	struct	mlme_priv *pmlmepriv = &adapter->mlmepriv;
++#ifdef CONFIG_LAYER2_ROAMING
++	int do_join_r;
++#endif //CONFIG_LAYER2_ROAMING
++
++#if 0
++	if (adapter->bDriverStopped == _TRUE){
++		_rtw_up_sema(&pmlmepriv->assoc_terminate);
++		return;
++	}
++#endif	
++
++_func_enter_;		
++#ifdef PLATFORM_FREEBSD
++		rtw_mtx_lock(NULL);
++		 if (callout_pending(&adapter->mlmepriv.assoc_timer.callout)) {
++			 /* callout was reset */
++			 //mtx_unlock(&sc->sc_mtx);
++			 rtw_mtx_unlock(NULL);
++			 return;
++		 }
++		 if (!callout_active(&adapter->mlmepriv.assoc_timer.callout)) {
++			 /* callout was stopped */
++			 //mtx_unlock(&sc->sc_mtx);
++			 rtw_mtx_unlock(NULL);
++			 return;
++		 }
++		 callout_deactivate(&adapter->mlmepriv.assoc_timer.callout);
++	
++	
++#endif
++
++	DBG_871X("%s, fw_state=%x\n", __FUNCTION__, get_fwstate(pmlmepriv));
++	
++	if(adapter->bDriverStopped ||adapter->bSurpriseRemoved)
++		return;
++
++	
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++
++	#ifdef CONFIG_LAYER2_ROAMING
++	if (rtw_to_roaming(adapter) > 0) { /* join timeout caused by roaming */
++		while(1) {
++			pmlmepriv->to_roaming--;
++			if (rtw_to_roaming(adapter) != 0) { /* try another */
++				DBG_871X("%s try another roaming\n", __FUNCTION__);
++				if( _SUCCESS!=(do_join_r=rtw_do_join(adapter)) ) {
++					DBG_871X("%s roaming do_join return %d\n", __FUNCTION__ ,do_join_r);
++					continue;
++				}
++				break;
++			} else {
++#ifdef CONFIG_INTEL_WIDI
++				if(adapter->mlmepriv.widi_state == INTEL_WIDI_STATE_ROAMING)
++				{
++					_rtw_memset(pmlmepriv->sa_ext, 0x00, L2SDTA_SERVICE_VE_LEN);
++					intel_widi_wk_cmd(adapter, INTEL_WIDI_LISTEN_WK, NULL);
++					DBG_871X("change to widi listen\n");
++				}
++#endif // CONFIG_INTEL_WIDI
++				DBG_871X("%s We've try roaming but fail\n", __FUNCTION__);
++				rtw_indicate_disconnect(adapter);
++				break;
++			}
++		}
++		
++	} else 
++	#endif
++	{
++		rtw_indicate_disconnect(adapter);
++		free_scanqueue(pmlmepriv);//???
++
++#ifdef CONFIG_IOCTL_CFG80211
++		//indicate disconnect for the case that join_timeout and check_fwstate != FW_LINKED
++		rtw_cfg80211_indicate_disconnect(adapter);
++#endif //CONFIG_IOCTL_CFG80211
++
++ 	}
++
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++	
++
++#ifdef CONFIG_DRVEXT_MODULE_WSC	
++	drvext_assoc_fail_indicate(&adapter->drvextpriv);	
++#endif	
++#ifdef PLATFORM_FREEBSD
++		rtw_mtx_unlock(NULL);
++#endif
++	
++_func_exit_;
++
++}
++
++/*
++* rtw_scan_timeout_handler - Timeout/Faliure handler for CMD SiteSurvey
++* @adapter: pointer to _adapter structure
++*/
++void rtw_scan_timeout_handler (_adapter *adapter)
++{	
++	_irqL irqL;
++	struct	mlme_priv *pmlmepriv = &adapter->mlmepriv;
++	
++	DBG_871X(FUNC_ADPT_FMT" fw_state=%x\n", FUNC_ADPT_ARG(adapter), get_fwstate(pmlmepriv));
++
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++	
++	_clr_fwstate_(pmlmepriv, _FW_UNDER_SURVEY);
++
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++
++	rtw_indicate_scan_done(adapter, _TRUE);
++
++}
++
++static void rtw_auto_scan_handler(_adapter *padapter)
++{
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	struct pwrctrl_priv *pwrctrlpriv = &padapter->pwrctrlpriv;
++
++	//auto site survey per 60sec
++	if(pmlmepriv->scan_interval >0)
++	{
++		pmlmepriv->scan_interval--;
++		if(pmlmepriv->scan_interval==0)
++		{
++/*		
++			if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == _TRUE) 
++			{
++				DBG_871X("exit %s when _FW_UNDER_SURVEY|_FW_UNDER_LINKING -> \n", __FUNCTION__);
++				return;
++			}
++			
++			if(pmlmepriv->sitesurveyctrl.traffic_busy == _TRUE)
++			{
++				DBG_871X("%s exit cause traffic_busy(%x)\n",__FUNCTION__, pmlmepriv->sitesurveyctrl.traffic_busy);
++				return;
++			}
++*/
++
++#ifdef CONFIG_CONCURRENT_MODE
++			if (rtw_buddy_adapter_up(padapter))
++			{
++				if ((check_buddy_fwstate(padapter, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == _TRUE) ||
++					(padapter->pbuddy_adapter->mlmepriv.LinkDetectInfo.bBusyTraffic == _TRUE))
++				{		
++					DBG_871X("%s, but buddy_intf is under scanning or linking or BusyTraffic\n", __FUNCTION__);
++					return;
++				}
++			}
++#endif
++
++			DBG_871X("%s\n", __FUNCTION__);
++
++			rtw_set_802_11_bssid_list_scan(padapter, NULL, 0);			
++			
++			pmlmepriv->scan_interval = SCAN_INTERVAL;// 30*2 sec = 60sec
++			
++		}
++		
++	}
++
++}
++
++void rtw_dynamic_check_timer_handlder(_adapter *adapter)
++{
++#ifdef CONFIG_AP_MODE
++	struct mlme_priv *pmlmepriv = &adapter->mlmepriv;
++#endif //CONFIG_AP_MODE
++	struct registry_priv *pregistrypriv = &adapter->registrypriv;
++#ifdef CONFIG_CONCURRENT_MODE	
++	PADAPTER pbuddy_adapter = adapter->pbuddy_adapter;	
++#endif
++
++	if(!adapter)
++		return;	
++
++	if(adapter->hw_init_completed == _FALSE)
++		return;
++
++	if ((adapter->bDriverStopped == _TRUE)||(adapter->bSurpriseRemoved== _TRUE))
++		return;
++
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if(pbuddy_adapter)
++	{
++		if(adapter->net_closed == _TRUE && pbuddy_adapter->net_closed == _TRUE)
++		{
++			return;
++		}		
++	}
++	else
++#endif //CONFIG_CONCURRENT_MODE
++	if(adapter->net_closed == _TRUE)
++	{
++		return;
++	}	
++
++	rtw_dynamic_chk_wk_cmd(adapter);
++
++	if(pregistrypriv->wifi_spec==1)
++	{	
++#ifdef CONFIG_P2P
++		struct wifidirect_info *pwdinfo = &adapter->wdinfo;
++		if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++#endif	
++		{
++			//auto site survey
++			rtw_auto_scan_handler(adapter);
++		}	
++	}
++
++#ifndef CONFIG_ACTIVE_KEEP_ALIVE_CHECK
++#ifdef CONFIG_AP_MODE
++	if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE)
++	{
++		expire_timeout_chk(adapter);
++	}	
++#endif
++#endif //!CONFIG_ACTIVE_KEEP_ALIVE_CHECK
++
++#ifdef CONFIG_BR_EXT
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 35))
++	rcu_read_lock();
++#endif	// (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 35))
++
++#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35)) 
++	if( adapter->pnetdev->br_port 
++#else	// (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35))
++	if( rcu_dereference(adapter->pnetdev->rx_handler_data)
++#endif	// (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35))
++		&& (check_fwstate(pmlmepriv, WIFI_STATION_STATE|WIFI_ADHOC_STATE) == _TRUE) )
++	{
++		// expire NAT2.5 entry
++		void nat25_db_expire(_adapter *priv);
++		nat25_db_expire(adapter);
++
++		if (adapter->pppoe_connection_in_progress > 0) {
++			adapter->pppoe_connection_in_progress--;
++		}
++		
++		// due to rtw_dynamic_check_timer_handlder() is called every 2 seconds
++		if (adapter->pppoe_connection_in_progress > 0) {
++			adapter->pppoe_connection_in_progress--;
++		}
++	}
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 35))
++	rcu_read_unlock();
++#endif	// (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 35))
++
++#endif	// CONFIG_BR_EXT
++	
++}
++
++
++#ifdef CONFIG_SET_SCAN_DENY_TIMER
++inline bool rtw_is_scan_deny(_adapter *adapter)
++{
++	struct mlme_priv *mlmepriv = &adapter->mlmepriv;
++	return (ATOMIC_READ(&mlmepriv->set_scan_deny) != 0) ? _TRUE : _FALSE;
++}
++
++inline void rtw_clear_scan_deny(_adapter *adapter)
++{
++	struct mlme_priv *mlmepriv = &adapter->mlmepriv;
++	ATOMIC_SET(&mlmepriv->set_scan_deny, 0);
++	if (0)
++	DBG_871X(FUNC_ADPT_FMT"\n", FUNC_ADPT_ARG(adapter));
++}
++
++void rtw_set_scan_deny_timer_hdl(_adapter *adapter)
++{
++	rtw_clear_scan_deny(adapter);
++}
++
++void rtw_set_scan_deny(_adapter *adapter, u32 ms)
++{
++	struct mlme_priv *mlmepriv = &adapter->mlmepriv;
++#ifdef CONFIG_CONCURRENT_MODE
++	struct mlme_priv *b_mlmepriv;
++#endif
++
++	if (0)
++	DBG_871X(FUNC_ADPT_FMT"\n", FUNC_ADPT_ARG(adapter));
++	ATOMIC_SET(&mlmepriv->set_scan_deny, 1);
++	_set_timer(&mlmepriv->set_scan_deny_timer, ms);
++	
++#ifdef CONFIG_CONCURRENT_MODE
++	if (!adapter->pbuddy_adapter)
++		return;
++
++	if (0)
++	DBG_871X(FUNC_ADPT_FMT"\n", FUNC_ADPT_ARG(adapter->pbuddy_adapter));
++ 	b_mlmepriv = &adapter->pbuddy_adapter->mlmepriv;
++	ATOMIC_SET(&b_mlmepriv->set_scan_deny, 1);
++	_set_timer(&b_mlmepriv->set_scan_deny_timer, ms);	
++#endif
++	
++}
++#endif
++
++#if defined(IEEE80211_SCAN_RESULT_EXPIRE)
++#define RTW_SCAN_RESULT_EXPIRE IEEE80211_SCAN_RESULT_EXPIRE/HZ*1000 -1000 //3000 -1000
++#else
++#define RTW_SCAN_RESULT_EXPIRE 2000
++#endif
++
++#ifndef PLATFORM_FREEBSD
++/*
++* Select a new join candidate from the original @param candidate and @param competitor
++* @return _TRUE: candidate is updated
++* @return _FALSE: candidate is not updated
++*/
++static int rtw_check_join_candidate(struct mlme_priv *pmlmepriv
++	, struct wlan_network **candidate, struct wlan_network *competitor)
++{
++	int updated = _FALSE;
++	_adapter *adapter = container_of(pmlmepriv, _adapter, mlmepriv);
++
++
++	//check bssid, if needed
++	if(pmlmepriv->assoc_by_bssid==_TRUE) {
++		if(_rtw_memcmp(competitor->network.MacAddress, pmlmepriv->assoc_bssid, ETH_ALEN) ==_FALSE)
++			goto exit;
++	}
++
++	//check ssid, if needed
++	if(pmlmepriv->assoc_ssid.Ssid && pmlmepriv->assoc_ssid.SsidLength) {
++		if(	competitor->network.Ssid.SsidLength != pmlmepriv->assoc_ssid.SsidLength
++			|| _rtw_memcmp(competitor->network.Ssid.Ssid, pmlmepriv->assoc_ssid.Ssid, pmlmepriv->assoc_ssid.SsidLength) == _FALSE
++		)
++			goto exit;
++	}
++
++	if(rtw_is_desired_network(adapter, competitor)  == _FALSE)
++		goto exit;
++
++#ifdef  CONFIG_LAYER2_ROAMING
++	if(rtw_to_roaming(adapter) > 0) {
++		if(	rtw_get_passing_time_ms((u32)competitor->last_scanned) >= RTW_SCAN_RESULT_EXPIRE
++			|| is_same_ess(&competitor->network, &pmlmepriv->cur_network.network) == _FALSE
++		)
++			goto exit;
++	}
++#endif
++	
++	if(*candidate == NULL ||(*candidate)->network.Rssi<competitor->network.Rssi )
++	{
++		*candidate = competitor;
++		updated = _TRUE;
++	}
++
++#if 0
++	if(pmlmepriv->assoc_by_bssid==_TRUE) { // associate with bssid
++		if(	(*candidate == NULL ||(*candidate)->network.Rssi<competitor->network.Rssi )
++			&& _rtw_memcmp(competitor->network.MacAddress, pmlmepriv->assoc_bssid, ETH_ALEN)==_TRUE
++		) {
++			*candidate = competitor;
++			updated = _TRUE;
++		}
++	} else  if (pmlmepriv->assoc_ssid.SsidLength == 0 ) { // associate with ssid, but ssidlength is 0
++		if(	(*candidate == NULL ||(*candidate)->network.Rssi<competitor->network.Rssi ) ) {
++			*candidate = competitor;
++			updated = _TRUE;
++		}
++	} else
++#ifdef  CONFIG_LAYER2_ROAMING
++	if(rtw_to_roaming(adapter)) { // roaming
++		if(	(*candidate == NULL ||(*candidate)->network.Rssi<competitor->network.Rssi )
++			&& is_same_ess(&competitor->network, &pmlmepriv->cur_network.network) 
++			//&&(!is_same_network(&competitor->network, &pmlmepriv->cur_network.network))
++			&& rtw_get_passing_time_ms((u32)competitor->last_scanned) < RTW_SCAN_RESULT_EXPIRE
++			&& rtw_is_desired_network(adapter, competitor)
++		) {
++			*candidate = competitor;
++			updated = _TRUE;
++		}
++		
++	} else
++#endif
++	{ // associate with ssid
++		if(	(*candidate == NULL ||(*candidate)->network.Rssi<competitor->network.Rssi )
++			&& (competitor->network.Ssid.SsidLength==pmlmepriv->assoc_ssid.SsidLength)
++			&&((_rtw_memcmp(competitor->network.Ssid.Ssid, pmlmepriv->assoc_ssid.Ssid, pmlmepriv->assoc_ssid.SsidLength)) == _TRUE)
++			&& rtw_is_desired_network(adapter, competitor)
++		) {
++			*candidate = competitor;
++			updated = _TRUE;
++		}
++	}
++#endif
++
++	if(updated){
++		DBG_871X("[by_bssid:%u][assoc_ssid:%s]"
++			#ifdef  CONFIG_LAYER2_ROAMING
++			"[to_roaming:%u] "
++			#endif
++			"new candidate: %s("MAC_FMT", ch%u) rssi:%d\n",
++			pmlmepriv->assoc_by_bssid,
++			pmlmepriv->assoc_ssid.Ssid,
++			#ifdef  CONFIG_LAYER2_ROAMING
++			rtw_to_roaming(adapter),
++			#endif
++			(*candidate)->network.Ssid.Ssid,
++			MAC_ARG((*candidate)->network.MacAddress),
++			(*candidate)->network.Configuration.DSConfig,
++			(int)(*candidate)->network.Rssi
++		);
++	}
++
++exit:
++	return updated;
++}
++
++/*
++Calling context:
++The caller of the sub-routine will be in critical section...
++
++The caller must hold the following spinlock
++
++pmlmepriv->lock
++
++
++*/
++
++int rtw_select_and_join_from_scanned_queue(struct mlme_priv *pmlmepriv )
++{
++	_irqL	irqL;
++	int ret;
++	_list	*phead;
++	_adapter *adapter;	
++	_queue	*queue	= &(pmlmepriv->scanned_queue);
++	struct	wlan_network	*pnetwork = NULL;
++	struct	wlan_network	*candidate = NULL;
++	u8 		bSupportAntDiv = _FALSE;
++
++_func_enter_;
++
++	_enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++	phead = get_list_head(queue);		
++	adapter = (_adapter *)pmlmepriv->nic_hdl;
++
++	pmlmepriv->pscanned = get_next( phead );
++
++	while (!rtw_end_of_queue_search(phead, pmlmepriv->pscanned)) {
++
++		pnetwork = LIST_CONTAINOR(pmlmepriv->pscanned, struct wlan_network, list);
++		if(pnetwork==NULL){
++			RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("%s return _FAIL:(pnetwork==NULL)\n", __FUNCTION__));
++			ret = _FAIL;
++			goto exit;
++		}
++		
++		pmlmepriv->pscanned = get_next(pmlmepriv->pscanned);
++
++		#if 0
++		DBG_871X("MacAddress:"MAC_FMT" ssid:%s\n", MAC_ARG(pnetwork->network.MacAddress), pnetwork->network.Ssid.Ssid);
++		#endif
++
++		rtw_check_join_candidate(pmlmepriv, &candidate, pnetwork);
++ 
++ 	}
++
++	if(candidate == NULL) {
++		DBG_871X("%s: return _FAIL(candidate == NULL)\n", __FUNCTION__);
++		ret = _FAIL;
++		goto exit;
++	} else {
++		DBG_871X("%s: candidate: %s("MAC_FMT", ch:%u)\n", __FUNCTION__,
++			candidate->network.Ssid.Ssid, MAC_ARG(candidate->network.MacAddress),
++			candidate->network.Configuration.DSConfig);
++	}
++	
++
++	// check for situation of  _FW_LINKED 
++	if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
++	{
++		DBG_871X("%s: _FW_LINKED while ask_for_joinbss!!!\n", __FUNCTION__);
++
++		#if 0 // for WPA/WPA2 authentication, wpa_supplicant will expect authentication from AP, it is needed to reconnect AP...
++		if(is_same_network(&pmlmepriv->cur_network.network, &candidate->network))
++		{
++			DBG_871X("%s: _FW_LINKED and is same network, it needn't join again\n", __FUNCTION__);
++
++			rtw_indicate_connect(adapter);//rtw_indicate_connect again
++				
++			ret = 2;
++			goto exit;
++		}
++		else
++		#endif
++		{
++			rtw_disassoc_cmd(adapter, 0, _TRUE);
++			rtw_indicate_disconnect(adapter);
++			rtw_free_assoc_resources(adapter, 0);
++		}
++	}
++	
++	#ifdef CONFIG_ANTENNA_DIVERSITY
++	rtw_hal_get_def_var(adapter, HAL_DEF_IS_SUPPORT_ANT_DIV, &(bSupportAntDiv));
++	if(_TRUE == bSupportAntDiv)	
++	{
++		u8 CurrentAntenna;
++		rtw_hal_get_def_var(adapter, HAL_DEF_CURRENT_ANTENNA, &(CurrentAntenna));			
++		DBG_871X("#### Opt_Ant_(%s) , cur_Ant(%s)\n",
++			(2==candidate->network.PhyInfo.Optimum_antenna)?"A":"B",
++			(2==CurrentAntenna)?"A":"B"
++		);
++	}
++	#endif
++	set_fwstate(pmlmepriv, _FW_UNDER_LINKING);
++	ret = rtw_joinbss_cmd(adapter, candidate);
++	
++exit:
++	_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++
++_func_exit_;
++
++	return ret;
++}
++#else
++int rtw_select_and_join_from_scanned_queue(struct mlme_priv *pmlmepriv )
++{	
++	_irqL	irqL;
++	_list	*phead;
++#ifdef CONFIG_ANTENNA_DIVERSITY
++	u8 CurrentAntenna;
++#endif
++	unsigned char *dst_ssid, *src_ssid;
++	_adapter *adapter;	
++	_queue	*queue	= &(pmlmepriv->scanned_queue);
++	struct	wlan_network	*pnetwork = NULL;
++	struct	wlan_network	*pnetwork_max_rssi = NULL;
++	#ifdef CONFIG_LAYER2_ROAMING
++	struct wlan_network * roaming_candidate=NULL;
++	u32 cur_time=rtw_get_current_time();
++	#endif
++
++_func_enter_;
++	_enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++	phead = get_list_head(queue);		
++	adapter = (_adapter *)pmlmepriv->nic_hdl;
++
++	pmlmepriv->pscanned = get_next( phead );
++
++	while (!rtw_end_of_queue_search(phead, pmlmepriv->pscanned)) {
++
++		pnetwork = LIST_CONTAINOR(pmlmepriv->pscanned, struct wlan_network, list);
++		if(pnetwork==NULL){
++			RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("(2)rtw_select_and_join_from_scanned_queue return _FAIL:(pnetwork==NULL)\n"));
++			_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++			return _FAIL;	
++		}
++
++		dst_ssid = pnetwork->network.Ssid.Ssid;
++		src_ssid = pmlmepriv->assoc_ssid.Ssid;
++		
++		pmlmepriv->pscanned = get_next(pmlmepriv->pscanned);
++
++		#if 0
++		DBG_871X("MacAddress:"MAC_FMT" ssid:%s\n", MAC_ARG(pnetwork->network.MacAddress), pnetwork->network.Ssid.Ssid);
++		#endif
++
++		if(pmlmepriv->assoc_by_bssid==_TRUE)
++		{
++			if(_rtw_memcmp(pnetwork->network.MacAddress, pmlmepriv->assoc_bssid, ETH_ALEN)==_TRUE)
++			{
++				//remove the condition @ 20081125
++				//if((pmlmepriv->cur_network.network.InfrastructureMode==Ndis802_11AutoUnknown)||
++				//	pmlmepriv->cur_network.network.InfrastructureMode == pnetwork->network.InfrastructureMode)
++				//		goto ask_for_joinbss;
++				
++				if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
++				{
++					if(is_same_network(&pmlmepriv->cur_network.network, &pnetwork->network))
++					{
++						//DBG_871X("select_and_join(1): _FW_LINKED and is same network, it needn't join again\n");
++
++						rtw_indicate_connect(adapter);//rtw_indicate_connect again
++						_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);	
++						return 2;
++					}
++					else
++					{
++						rtw_disassoc_cmd(adapter, 0, _TRUE);
++						rtw_indicate_disconnect(adapter);
++						rtw_free_assoc_resources(adapter, 0);
++						_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++						goto ask_for_joinbss;
++						
++					}
++				}
++				else
++				{
++					_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++					goto ask_for_joinbss;
++				}
++							
++			}
++			
++		} else if (pmlmepriv->assoc_ssid.SsidLength == 0) {
++			_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++			goto ask_for_joinbss;//anyway, join first selected(dequeued) pnetwork if ssid_len=0				
++	
++		#ifdef CONFIG_LAYER2_ROAMING
++		} else if (rtw_to_roaming(adapter) > 0) {
++		
++			if(	(roaming_candidate == NULL ||roaming_candidate->network.Rssi<pnetwork->network.Rssi )
++				&& is_same_ess(&pnetwork->network, &pmlmepriv->cur_network.network) 
++				//&&(!is_same_network(&pnetwork->network, &pmlmepriv->cur_network.network))
++				&&  rtw_get_time_interval_ms((u32)pnetwork->last_scanned,cur_time) < 5000
++				) {
++				roaming_candidate = pnetwork;
++				//RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,
++				DBG_871X
++					("roaming_candidate???: %s("MAC_FMT")\n",
++					roaming_candidate->network.Ssid.Ssid, MAC_ARG(roaming_candidate->network.MacAddress) )
++					//)
++					;
++			}
++			continue;
++		#endif
++
++		} else if ( (pnetwork->network.Ssid.SsidLength==pmlmepriv->assoc_ssid.SsidLength)
++			&&((_rtw_memcmp(dst_ssid, src_ssid, pmlmepriv->assoc_ssid.SsidLength)) == _TRUE)
++			)
++		{
++			RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("dst_ssid=%s, src_ssid=%s \n", dst_ssid, src_ssid));
++#ifdef CONFIG_ANTENNA_DIVERSITY
++			rtw_hal_get_def_var(adapter, HAL_DEF_CURRENT_ANTENNA, &(CurrentAntenna));			
++			DBG_871X("#### dst_ssid=(%s) Opt_Ant_(%s) , cur_Ant(%s)\n", dst_ssid,
++				(2==pnetwork->network.PhyInfo.Optimum_antenna)?"A":"B",
++				(2==CurrentAntenna)?"A":"B");
++#endif
++			//remove the condition @ 20081125
++			//if((pmlmepriv->cur_network.network.InfrastructureMode==Ndis802_11AutoUnknown)||
++			//	pmlmepriv->cur_network.network.InfrastructureMode == pnetwork->network.InfrastructureMode)
++			//{
++			//	_rtw_memcpy(pmlmepriv->assoc_bssid, pnetwork->network.MacAddress, ETH_ALEN);
++			//	goto ask_for_joinbss;
++			//}
++
++			if(pmlmepriv->assoc_by_rssi==_TRUE)//if the ssid is the same, select the bss which has the max rssi
++			{
++				if( NULL==pnetwork_max_rssi|| pnetwork->network.Rssi > pnetwork_max_rssi->network.Rssi)
++						pnetwork_max_rssi = pnetwork;					
++			}
++			else if(rtw_is_desired_network(adapter, pnetwork) == _TRUE)
++			{
++				if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
++				{
++#if 0				
++					if(is_same_network(&pmlmepriv->cur_network.network, &pnetwork->network))
++					{
++						DBG_871X("select_and_join(2): _FW_LINKED and is same network, it needn't join again\n");
++						
++						rtw_indicate_connect(adapter);//rtw_indicate_connect again
++						
++						return 2;
++					}
++					else
++#endif						
++					{
++						rtw_disassoc_cmd(adapter, 0, _TRUE);
++						//rtw_indicate_disconnect(adapter);//
++						rtw_free_assoc_resources(adapter, 0);
++						_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++						goto ask_for_joinbss;						
++					}
++				}
++				else
++				{
++					_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++					goto ask_for_joinbss;
++				}				
++
++			}
++		
++			
++		}
++ 	
++ 	}
++	_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++	#ifdef CONFIG_LAYER2_ROAMING
++	if(rtw_to_roaming(adapter) > 0 && roaming_candidate ){
++		pnetwork=roaming_candidate;
++		DBG_871X("select_and_join_from_scanned_queue: roaming_candidate: %s("MAC_FMT")\n",
++			pnetwork->network.Ssid.Ssid, MAC_ARG(pnetwork->network.MacAddress));
++		goto ask_for_joinbss;
++	}
++	#endif
++
++	if((pmlmepriv->assoc_by_rssi==_TRUE)  && (pnetwork_max_rssi!=NULL))
++	{
++		pnetwork = pnetwork_max_rssi;
++		DBG_871X("select_and_join_from_scanned_queue: pnetwork_max_rssi: %s("MAC_FMT")\n",
++			pnetwork->network.Ssid.Ssid, MAC_ARG(pnetwork->network.MacAddress));
++		goto ask_for_joinbss;
++	}
++
++	DBG_871X("(1)rtw_select_and_join_from_scanned_queue return _FAIL\n");
++	
++_func_exit_;	
++
++     return _FAIL;
++
++ask_for_joinbss:
++	
++_func_exit_;
++
++	return rtw_joinbss_cmd(adapter, pnetwork);
++
++}
++#endif //PLATFORM_FREEBSD
++
++
++sint rtw_set_auth(_adapter * adapter,struct security_priv *psecuritypriv)
++{
++	struct	cmd_obj* pcmd;
++	struct 	setauth_parm *psetauthparm;
++	struct	cmd_priv	*pcmdpriv=&(adapter->cmdpriv);
++	sint		res=_SUCCESS;
++	
++_func_enter_;	
++
++	pcmd = (struct	cmd_obj*)rtw_zmalloc(sizeof(struct	cmd_obj));
++	if(pcmd==NULL){
++		res= _FAIL;  //try again
++		goto exit;
++	}
++	
++	psetauthparm=(struct setauth_parm*)rtw_zmalloc(sizeof(struct setauth_parm));
++	if(psetauthparm==NULL){
++		rtw_mfree((unsigned char *)pcmd, sizeof(struct	cmd_obj));
++		res= _FAIL;
++		goto exit;
++	}
++
++	_rtw_memset(psetauthparm, 0, sizeof(struct setauth_parm));
++	psetauthparm->mode=(unsigned char)psecuritypriv->dot11AuthAlgrthm;
++	
++	pcmd->cmdcode = _SetAuth_CMD_;
++	pcmd->parmbuf = (unsigned char *)psetauthparm;   
++	pcmd->cmdsz =  (sizeof(struct setauth_parm));  
++	pcmd->rsp = NULL;
++	pcmd->rspsz = 0;
++
++
++	_rtw_init_listhead(&pcmd->list);
++
++	RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("after enqueue set_auth_cmd, auth_mode=%x\n", psecuritypriv->dot11AuthAlgrthm));
++
++	res = rtw_enqueue_cmd(pcmdpriv, pcmd);
++
++exit:
++
++_func_exit_;
++
++	return res;
++
++}
++
++
++sint rtw_set_key(_adapter * adapter,struct security_priv *psecuritypriv,sint keyid, u8 set_tx)
++{
++	u8	keylen;
++	struct cmd_obj		*pcmd;
++	struct setkey_parm	*psetkeyparm;
++	struct cmd_priv		*pcmdpriv = &(adapter->cmdpriv);
++	struct mlme_priv		*pmlmepriv = &(adapter->mlmepriv);
++	sint	res=_SUCCESS;
++	
++_func_enter_;
++	
++	pcmd = (struct	cmd_obj*)rtw_zmalloc(sizeof(struct	cmd_obj));
++	if(pcmd==NULL){
++		res= _FAIL;  //try again
++		goto exit;
++	}
++	psetkeyparm=(struct setkey_parm*)rtw_zmalloc(sizeof(struct setkey_parm));
++	if(psetkeyparm==NULL){
++		rtw_mfree((unsigned char *)pcmd, sizeof(struct	cmd_obj));
++		res= _FAIL;
++		goto exit;
++	}
++
++	_rtw_memset(psetkeyparm, 0, sizeof(struct setkey_parm));
++
++	if(psecuritypriv->dot11AuthAlgrthm ==dot11AuthAlgrthm_8021X){		
++		psetkeyparm->algorithm=(unsigned char)psecuritypriv->dot118021XGrpPrivacy;	
++		RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("\n rtw_set_key: psetkeyparm->algorithm=(unsigned char)psecuritypriv->dot118021XGrpPrivacy=%d \n", psetkeyparm->algorithm));
++	}	
++	else{
++		psetkeyparm->algorithm=(u8)psecuritypriv->dot11PrivacyAlgrthm;
++		RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("\n rtw_set_key: psetkeyparm->algorithm=(u8)psecuritypriv->dot11PrivacyAlgrthm=%d \n", psetkeyparm->algorithm));
++
++	}
++	psetkeyparm->keyid = (u8)keyid;//0~3
++	psetkeyparm->set_tx = set_tx;
++	if (is_wep_enc(psetkeyparm->algorithm))
++		psecuritypriv->key_mask |= BIT(psetkeyparm->keyid);
++
++	DBG_871X("==> rtw_set_key algorithm(%x),keyid(%x),key_mask(%x)\n",psetkeyparm->algorithm,psetkeyparm->keyid, psecuritypriv->key_mask);
++	RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("\n rtw_set_key: psetkeyparm->algorithm=%d psetkeyparm->keyid=(u8)keyid=%d \n",psetkeyparm->algorithm, keyid));
++
++	switch(psetkeyparm->algorithm){
++		
++		case _WEP40_:
++			keylen=5;
++			_rtw_memcpy(&(psetkeyparm->key[0]), &(psecuritypriv->dot11DefKey[keyid].skey[0]), keylen);
++			break;
++		case _WEP104_:
++			keylen=13;
++			_rtw_memcpy(&(psetkeyparm->key[0]), &(psecuritypriv->dot11DefKey[keyid].skey[0]), keylen);
++			break;
++		case _TKIP_:
++			keylen=16;			
++			_rtw_memcpy(&psetkeyparm->key, &psecuritypriv->dot118021XGrpKey[keyid], keylen);
++			psetkeyparm->grpkey=1;
++			break;
++		case _AES_:
++			keylen=16;			
++			_rtw_memcpy(&psetkeyparm->key, &psecuritypriv->dot118021XGrpKey[keyid], keylen);
++			psetkeyparm->grpkey=1;
++			break;
++		default:
++			RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("\n rtw_set_key:psecuritypriv->dot11PrivacyAlgrthm = %x (must be 1 or 2 or 4 or 5)\n",psecuritypriv->dot11PrivacyAlgrthm));
++			res= _FAIL;
++			goto exit;
++	}
++
++	
++	pcmd->cmdcode = _SetKey_CMD_;
++	pcmd->parmbuf = (u8 *)psetkeyparm;   
++	pcmd->cmdsz =  (sizeof(struct setkey_parm));  
++	pcmd->rsp = NULL;
++	pcmd->rspsz = 0;
++
++
++	_rtw_init_listhead(&pcmd->list);
++
++	//_rtw_init_sema(&(pcmd->cmd_sem), 0);
++
++	res = rtw_enqueue_cmd(pcmdpriv, pcmd);
++
++exit:
++_func_exit_;
++	return res;
++
++}
++
++
++//adjust IEs for rtw_joinbss_cmd in WMM
++int rtw_restruct_wmm_ie(_adapter *adapter, u8 *in_ie, u8 *out_ie, uint in_len, uint initial_out_len)
++{
++	unsigned	int ielength=0;
++	unsigned int i, j;
++
++	i = 12; //after the fixed IE
++	while(i<in_len)
++	{
++		ielength = initial_out_len;		
++		
++		if(in_ie[i] == 0xDD && in_ie[i+2] == 0x00 && in_ie[i+3] == 0x50  && in_ie[i+4] == 0xF2 && in_ie[i+5] == 0x02 && i+5 < in_len) //WMM element ID and OUI
++		{
++
++			//Append WMM IE to the last index of out_ie
++			/*
++			for(j=i; j< i+(in_ie[i+1]+2); j++)
++			{
++				out_ie[ielength] = in_ie[j];				
++				ielength++;
++			}
++			out_ie[initial_out_len+8] = 0x00; //force the QoS Info Field to be zero
++	                */
++                       
++                        for ( j = i; j < i + 9; j++ )
++                        {
++                            out_ie[ ielength] = in_ie[ j ];
++                            ielength++;
++                        } 
++                        out_ie[ initial_out_len + 1 ] = 0x07;
++                        out_ie[ initial_out_len + 6 ] = 0x00;
++                        out_ie[ initial_out_len + 8 ] = 0x00;
++	
++			break;
++		}
++
++		i+=(in_ie[i+1]+2); // to the next IE element
++	}
++	
++	return ielength;
++	
++}
++
++
++//
++// Ported from 8185: IsInPreAuthKeyList(). (Renamed from SecIsInPreAuthKeyList(), 2006-10-13.)
++// Added by Annie, 2006-05-07.
++//
++// Search by BSSID,
++// Return Value:
++//		-1 		:if there is no pre-auth key in the  table
++//		>=0		:if there is pre-auth key, and   return the entry id
++//
++//
++
++static int SecIsInPMKIDList(_adapter *Adapter, u8 *bssid)
++{
++	struct security_priv *psecuritypriv=&Adapter->securitypriv;
++	int i=0;
++
++	do
++	{
++		if( ( psecuritypriv->PMKIDList[i].bUsed ) && 
++                    (  _rtw_memcmp( psecuritypriv->PMKIDList[i].Bssid, bssid, ETH_ALEN ) == _TRUE ) )
++		{
++			break;
++		}
++		else
++		{	
++			i++;
++			//continue;
++		}
++		
++	}while(i<NUM_PMKID_CACHE);
++
++	if( i == NUM_PMKID_CACHE )
++	{ 
++		i = -1;// Could not find.
++	}
++	else
++	{ 
++		// There is one Pre-Authentication Key for the specific BSSID.
++	}
++
++	return (i);
++	
++}
++
++//
++// Check the RSN IE length
++// If the RSN IE length <= 20, the RSN IE didn't include the PMKID information
++// 0-11th element in the array are the fixed IE
++// 12th element in the array is the IE
++// 13th element in the array is the IE length  
++//
++
++static int rtw_append_pmkid(_adapter *Adapter,int iEntry, u8 *ie, uint ie_len)
++{
++	struct security_priv *psecuritypriv=&Adapter->securitypriv;
++
++	if(ie[13]<=20){	
++		// The RSN IE didn't include the PMK ID, append the PMK information 
++			ie[ie_len]=1;
++			ie_len++;
++			ie[ie_len]=0;	//PMKID count = 0x0100
++			ie_len++;
++			_rtw_memcpy(	&ie[ie_len], &psecuritypriv->PMKIDList[iEntry].PMKID, 16);
++		
++			ie_len+=16;
++			ie[13]+=18;//PMKID length = 2+16
++
++	}
++	return (ie_len);
++	
++}
++sint rtw_restruct_sec_ie(_adapter *adapter,u8 *in_ie, u8 *out_ie, uint in_len)
++{
++	u8 authmode, securitytype, match;
++	u8 sec_ie[255], uncst_oui[4], bkup_ie[255];
++	u8 wpa_oui[4]={0x0, 0x50, 0xf2, 0x01};
++	uint 	ielength, cnt, remove_cnt;
++	int iEntry;
++
++	struct mlme_priv *pmlmepriv = &adapter->mlmepriv;
++	struct security_priv *psecuritypriv=&adapter->securitypriv;
++	uint 	ndisauthmode=psecuritypriv->ndisauthtype;
++	uint ndissecuritytype = psecuritypriv->ndisencryptstatus;
++	
++_func_enter_;
++
++	RT_TRACE(_module_rtl871x_mlme_c_, _drv_notice_,
++		 ("+rtw_restruct_sec_ie: ndisauthmode=%d ndissecuritytype=%d\n",
++		  ndisauthmode, ndissecuritytype));
++	
++	//copy fixed ie only
++	_rtw_memcpy(out_ie, in_ie,12);
++	ielength=12;
++	if((ndisauthmode==Ndis802_11AuthModeWPA)||(ndisauthmode==Ndis802_11AuthModeWPAPSK))
++			authmode=_WPA_IE_ID_;
++	if((ndisauthmode==Ndis802_11AuthModeWPA2)||(ndisauthmode==Ndis802_11AuthModeWPA2PSK))
++			authmode=_WPA2_IE_ID_;
++
++	if(check_fwstate(pmlmepriv, WIFI_UNDER_WPS))
++	{
++		_rtw_memcpy(out_ie+ielength, psecuritypriv->wps_ie, psecuritypriv->wps_ie_len);
++		
++		ielength += psecuritypriv->wps_ie_len;
++	}
++	else if((authmode==_WPA_IE_ID_)||(authmode==_WPA2_IE_ID_))
++	{		
++		//copy RSN or SSN		
++		_rtw_memcpy(&out_ie[ielength], &psecuritypriv->supplicant_ie[0], psecuritypriv->supplicant_ie[1]+2);
++		/* debug for CONFIG_IEEE80211W
++		{
++			int jj;
++			printk("supplicant_ie_length=%d &&&&&&&&&&&&&&&&&&&\n", psecuritypriv->supplicant_ie[1]+2);
++			for(jj=0; jj < psecuritypriv->supplicant_ie[1]+2; jj++)
++				printk(" %02x ", psecuritypriv->supplicant_ie[jj]);
++			printk("\n");
++		}*/
++		ielength+=psecuritypriv->supplicant_ie[1]+2;
++		rtw_report_sec_ie(adapter, authmode, psecuritypriv->supplicant_ie);
++	
++#ifdef CONFIG_DRVEXT_MODULE
++		drvext_report_sec_ie(&adapter->drvextpriv, authmode, sec_ie);	
++#endif
++	}
++
++	iEntry = SecIsInPMKIDList(adapter, pmlmepriv->assoc_bssid);
++	if(iEntry<0)
++	{
++		return ielength;
++	}
++	else
++	{
++		if(authmode == _WPA2_IE_ID_)
++		{
++			ielength=rtw_append_pmkid(adapter, iEntry, out_ie, ielength);
++		}
++	}
++
++_func_exit_;
++	
++	return ielength;	
++}
++
++void rtw_init_registrypriv_dev_network(	_adapter* adapter)
++{
++	struct registry_priv* pregistrypriv = &adapter->registrypriv;
++	struct eeprom_priv* peepriv = &adapter->eeprompriv;
++	WLAN_BSSID_EX    *pdev_network = &pregistrypriv->dev_network;
++	u8 *myhwaddr = myid(peepriv);
++	
++_func_enter_;
++
++	_rtw_memcpy(pdev_network->MacAddress, myhwaddr, ETH_ALEN);
++
++	_rtw_memcpy(&pdev_network->Ssid, &pregistrypriv->ssid, sizeof(NDIS_802_11_SSID));
++	
++	pdev_network->Configuration.Length=sizeof(NDIS_802_11_CONFIGURATION);
++	pdev_network->Configuration.BeaconPeriod = 100;	
++	pdev_network->Configuration.FHConfig.Length = 0;
++	pdev_network->Configuration.FHConfig.HopPattern = 0;
++	pdev_network->Configuration.FHConfig.HopSet = 0;
++	pdev_network->Configuration.FHConfig.DwellTime = 0;
++	
++	
++_func_exit_;	
++	
++}
++
++void rtw_update_registrypriv_dev_network(_adapter* adapter) 
++{
++	int sz=0;
++	struct registry_priv* pregistrypriv = &adapter->registrypriv;	
++	WLAN_BSSID_EX    *pdev_network = &pregistrypriv->dev_network;
++	struct	security_priv*	psecuritypriv = &adapter->securitypriv;
++	struct	wlan_network	*cur_network = &adapter->mlmepriv.cur_network;
++	//struct	xmit_priv	*pxmitpriv = &adapter->xmitpriv;
++
++_func_enter_;
++
++#if 0
++	pxmitpriv->vcs_setting = pregistrypriv->vrtl_carrier_sense;
++	pxmitpriv->vcs = pregistrypriv->vcs_type;
++	pxmitpriv->vcs_type = pregistrypriv->vcs_type;
++	//pxmitpriv->rts_thresh = pregistrypriv->rts_thresh;
++	pxmitpriv->frag_len = pregistrypriv->frag_thresh;
++	
++	adapter->qospriv.qos_option = pregistrypriv->wmm_enable;
++#endif	
++
++	pdev_network->Privacy = (psecuritypriv->dot11PrivacyAlgrthm > 0 ? 1 : 0) ; // adhoc no 802.1x
++
++	pdev_network->Rssi = 0;
++
++	switch(pregistrypriv->wireless_mode)
++	{
++		case WIRELESS_11B:
++			pdev_network->NetworkTypeInUse = (Ndis802_11DS);
++			break;	
++		case WIRELESS_11G:
++		case WIRELESS_11BG:
++		case WIRELESS_11_24N:
++		case WIRELESS_11G_24N:
++		case WIRELESS_11BG_24N:
++			pdev_network->NetworkTypeInUse = (Ndis802_11OFDM24);
++			break;
++		case WIRELESS_11A:
++		case WIRELESS_11A_5N:
++			pdev_network->NetworkTypeInUse = (Ndis802_11OFDM5);
++			break;
++		case WIRELESS_11ABGN:
++			if(pregistrypriv->channel > 14)
++				pdev_network->NetworkTypeInUse = (Ndis802_11OFDM5);
++			else
++				pdev_network->NetworkTypeInUse = (Ndis802_11OFDM24);
++			break;
++		default :
++			// TODO
++			break;
++	}
++	
++	pdev_network->Configuration.DSConfig = (pregistrypriv->channel);
++	RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("pregistrypriv->channel=%d, pdev_network->Configuration.DSConfig=0x%x\n", pregistrypriv->channel, pdev_network->Configuration.DSConfig));	
++
++	if(cur_network->network.InfrastructureMode == Ndis802_11IBSS)
++		pdev_network->Configuration.ATIMWindow = (0);
++
++	pdev_network->InfrastructureMode = (cur_network->network.InfrastructureMode);
++
++	// 1. Supported rates
++	// 2. IE
++
++	//rtw_set_supported_rate(pdev_network->SupportedRates, pregistrypriv->wireless_mode) ; // will be called in rtw_generate_ie
++	sz = rtw_generate_ie(pregistrypriv);
++
++	pdev_network->IELength = sz;
++
++	pdev_network->Length = get_WLAN_BSSID_EX_sz((WLAN_BSSID_EX  *)pdev_network);
++
++	//notes: translate IELength & Length after assign the Length to cmdsz in createbss_cmd();
++	//pdev_network->IELength = cpu_to_le32(sz);
++		
++_func_exit_;	
++
++}
++
++void rtw_get_encrypt_decrypt_from_registrypriv(_adapter* adapter)
++{
++_func_enter_;
++
++
++_func_exit_;	
++	
++}
++
++//the fucntion is at passive_level 
++void rtw_joinbss_reset(_adapter *padapter)
++{
++	u8	threshold;
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++
++#ifdef CONFIG_80211N_HT	
++	struct ht_priv		*phtpriv = &pmlmepriv->htpriv;
++#endif
++
++	//todo: if you want to do something io/reg/hw setting before join_bss, please add code here
++	
++
++
++
++#ifdef CONFIG_80211N_HT
++
++	pmlmepriv->num_FortyMHzIntolerant = 0;
++
++	pmlmepriv->num_sta_no_ht = 0;
++
++	phtpriv->ampdu_enable = _FALSE;//reset to disabled
++
++#ifdef CONFIG_USB_HCI
++	// TH=1 => means that invalidate usb rx aggregation
++	// TH=0 => means that validate usb rx aggregation, use init value.
++	if(phtpriv->ht_option)
++	{
++		if(padapter->registrypriv.wifi_spec==1)		
++			threshold = 1;
++		else
++			threshold = 0;
++		rtw_hal_set_hwreg(padapter, HW_VAR_RXDMA_AGG_PG_TH, (u8 *)(&threshold));
++	}
++	else
++	{
++		threshold = 1;
++		rtw_hal_set_hwreg(padapter, HW_VAR_RXDMA_AGG_PG_TH, (u8 *)(&threshold));
++	}
++#endif
++
++#endif	
++
++}
++
++
++#ifdef CONFIG_80211N_HT
++
++//the fucntion is >= passive_level 
++unsigned int rtw_restructure_ht_ie(_adapter *padapter, u8 *in_ie, u8 *out_ie, uint in_len, uint *pout_len, u8 channel)
++{
++	u32 ielen, out_len;
++	unsigned char *p, *pframe;
++	struct rtw_ieee80211_ht_cap ht_capie;
++	unsigned char WMM_IE[] = {0x00, 0x50, 0xf2, 0x02, 0x00, 0x01, 0x00};
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	struct qos_priv   	*pqospriv= &pmlmepriv->qospriv;
++	struct ht_priv		*phtpriv = &pmlmepriv->htpriv;
++	struct registry_priv	*pregpriv = &padapter->registrypriv;
++	u8 cbw40_enable = 0;
++
++	phtpriv->ht_option = _FALSE;
++
++	p = rtw_get_ie(in_ie+12, _HT_CAPABILITY_IE_, &ielen, in_len-12);
++
++	if(p && ielen>0)
++	{
++		if(pqospriv->qos_option == 0)
++		{
++			out_len = *pout_len;
++			pframe = rtw_set_ie(out_ie+out_len, _VENDOR_SPECIFIC_IE_, 
++								_WMM_IE_Length_, WMM_IE, pout_len);
++
++			pqospriv->qos_option = 1;
++		}
++
++		out_len = *pout_len;
++
++		_rtw_memset(&ht_capie, 0, sizeof(struct rtw_ieee80211_ht_cap));
++
++		ht_capie.cap_info =  IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_TX_STBC |
++							IEEE80211_HT_CAP_DSSSCCK40;
++		//if insert module set only support 20MHZ, don't add the 40MHZ and SGI_40
++		if( channel > 14 )
++		{
++			if( pregpriv->cbw40_enable & BIT(1) )
++				cbw40_enable = 1;
++		}
++		else
++			if( pregpriv->cbw40_enable & BIT(0) )
++				cbw40_enable = 1;
++
++		if ( cbw40_enable != 0 )
++			ht_capie.cap_info |= IEEE80211_HT_CAP_SUP_WIDTH | IEEE80211_HT_CAP_SGI_40;
++				
++
++
++		{
++			u32 rx_packet_offset, max_recvbuf_sz;
++			rtw_hal_get_def_var(padapter, HAL_DEF_RX_PACKET_OFFSET, &rx_packet_offset);
++			rtw_hal_get_def_var(padapter, HAL_DEF_MAX_RECVBUF_SZ, &max_recvbuf_sz);
++			//if(max_recvbuf_sz-rx_packet_offset>(8191-256)) {
++			//	DBG_871X("%s IEEE80211_HT_CAP_MAX_AMSDU is set\n", __FUNCTION__);
++			//	ht_capie.cap_info = ht_capie.cap_info |IEEE80211_HT_CAP_MAX_AMSDU;
++			//}
++		}
++		
++		ht_capie.ampdu_params_info = (IEEE80211_HT_CAP_AMPDU_FACTOR&0x03);
++
++		if(padapter->securitypriv.dot11PrivacyAlgrthm == _AES_ )
++			ht_capie.ampdu_params_info |= (IEEE80211_HT_CAP_AMPDU_DENSITY&(0x07<<2));
++		else
++			ht_capie.ampdu_params_info |= (IEEE80211_HT_CAP_AMPDU_DENSITY&0x00);										
++
++		
++		pframe = rtw_set_ie(out_ie+out_len, _HT_CAPABILITY_IE_, 
++							sizeof(struct rtw_ieee80211_ht_cap), (unsigned char*)&ht_capie, pout_len);
++
++
++		//_rtw_memcpy(out_ie+out_len, p, ielen+2);//gtest
++		//*pout_len = *pout_len + (ielen+2);
++
++							
++		phtpriv->ht_option = _TRUE;
++
++		p = rtw_get_ie(in_ie+12, _HT_ADD_INFO_IE_, &ielen, in_len-12);
++		if(p && (ielen==sizeof(struct ieee80211_ht_addt_info)))
++		{
++			out_len = *pout_len;		
++			pframe = rtw_set_ie(out_ie+out_len, _HT_ADD_INFO_IE_, ielen, p+2 , pout_len);
++		}
++
++	}
++	
++	return (phtpriv->ht_option);
++	
++}
++
++//the fucntion is > passive_level (in critical_section)
++void rtw_update_ht_cap(_adapter *padapter, u8 *pie, uint ie_len, u8 channel)
++{	
++	u8 *p, max_ampdu_sz;
++	int len;		
++	//struct sta_info *bmc_sta, *psta;	
++	struct rtw_ieee80211_ht_cap *pht_capie;
++	struct ieee80211_ht_addt_info *pht_addtinfo;
++	//struct recv_reorder_ctrl *preorder_ctrl;
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	struct ht_priv		*phtpriv = &pmlmepriv->htpriv;
++	//struct recv_priv *precvpriv = &padapter->recvpriv;
++	struct registry_priv *pregistrypriv = &padapter->registrypriv;
++	//struct wlan_network *pcur_network = &(pmlmepriv->cur_network);;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);	
++	u8 cbw40_enable=0;
++
++	if(!phtpriv->ht_option)
++		return;
++
++	if ((!pmlmeinfo->HT_info_enable) || (!pmlmeinfo->HT_caps_enable))
++		return;
++
++	DBG_871X("+rtw_update_ht_cap()\n");
++
++	//maybe needs check if ap supports rx ampdu.
++	if((phtpriv->ampdu_enable==_FALSE) &&(pregistrypriv->ampdu_enable==1))
++	{
++		//In the wifi cert. test, the test Lab should turn off the AP's RX AMPDU. client doen't need to close the TX AMPDU
++		/*if(pregistrypriv->wifi_spec==1)
++		{
++			phtpriv->ampdu_enable = _FALSE;
++		}
++		else*/
++		{
++			phtpriv->ampdu_enable = _TRUE;
++		}
++	}
++	else if(pregistrypriv->ampdu_enable==2)
++	{
++		phtpriv->ampdu_enable = _TRUE;
++	}
++
++	
++	//check Max Rx A-MPDU Size 
++	len = 0;
++	p = rtw_get_ie(pie+sizeof (NDIS_802_11_FIXED_IEs), _HT_CAPABILITY_IE_, &len, ie_len-sizeof (NDIS_802_11_FIXED_IEs));
++	if(p && len>0)	
++	{
++		pht_capie = (struct rtw_ieee80211_ht_cap *)(p+2);
++		max_ampdu_sz = (pht_capie->ampdu_params_info & IEEE80211_HT_CAP_AMPDU_FACTOR);
++		max_ampdu_sz = 1 << (max_ampdu_sz+3); // max_ampdu_sz (kbytes);
++		
++		//DBG_871X("rtw_update_ht_cap(): max_ampdu_sz=%d\n", max_ampdu_sz);
++		phtpriv->rx_ampdu_maxlen = max_ampdu_sz;
++		
++	}
++
++
++	len=0;
++	p = rtw_get_ie(pie+sizeof (NDIS_802_11_FIXED_IEs), _HT_ADD_INFO_IE_, &len, ie_len-sizeof (NDIS_802_11_FIXED_IEs));
++	if(p && len>0)	
++	{
++		pht_addtinfo = (struct ieee80211_ht_addt_info *)(p+2);
++		//todo:
++	}
++
++	if( channel > 14 )
++	{
++		if( pregistrypriv->cbw40_enable & BIT(1) )
++			cbw40_enable = 1;
++	}
++	else
++		if( pregistrypriv->cbw40_enable & BIT(0) )
++			cbw40_enable = 1;
++
++
++	//update cur_bwmode & cur_ch_offset
++	if ((cbw40_enable) &&
++		(pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info & BIT(1)) && 
++		(pmlmeinfo->HT_info.infos[0] & BIT(2)))
++	{
++		int i;
++		u8	rf_type;
++
++		rtw_hal_get_hwreg(padapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type));
++
++		//update the MCS rates
++		for (i = 0; i < 16; i++)
++		{
++			if((rf_type == RF_1T1R) || (rf_type == RF_1T2R))
++			{
++				pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate[i] &= MCS_rate_1R[i];
++			}
++			else
++			{
++				#ifdef CONFIG_DISABLE_MCS13TO15
++				if(pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40 && pregistrypriv->wifi_spec != 1 )
++				{
++					pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate[i] &= MCS_rate_2R_MCS13TO15_OFF[i];
++				}
++				else
++					pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate[i] &= MCS_rate_2R[i];
++				#else
++				pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate[i] &= MCS_rate_2R[i];
++				#endif //CONFIG_DISABLE_MCS13TO15
++			}
++			#ifdef RTL8192C_RECONFIG_TO_1T1R
++			{
++				pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate[i] &= MCS_rate_1R[i];
++			}
++			#endif
++
++			if(pregistrypriv->special_rf_path)
++				pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate[i] &= MCS_rate_1R[i];
++
++		}
++		//switch to the 40M Hz mode accoring to the AP
++		pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_40;
++		switch ((pmlmeinfo->HT_info.infos[0] & 0x3))
++		{
++			case HT_EXTCHNL_OFFSET_UPPER:
++				pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_LOWER;
++				break;
++			
++			case HT_EXTCHNL_OFFSET_LOWER:
++				pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_UPPER;
++				break;
++				
++			default:
++				pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++				break;
++		}		
++	}
++
++	//
++	// Config SM Power Save setting
++	//
++	pmlmeinfo->SM_PS = (pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info & 0x0C) >> 2;
++	if(pmlmeinfo->SM_PS == WLAN_HT_CAP_SM_PS_STATIC)
++	{
++		/*u8 i;
++		//update the MCS rates
++		for (i = 0; i < 16; i++)
++		{
++			pmlmeinfo->HT_caps.HT_cap_element.MCS_rate[i] &= MCS_rate_1R[i];
++		}*/
++		DBG_871X("%s(): WLAN_HT_CAP_SM_PS_STATIC\n",__FUNCTION__);
++	}
++
++	//
++	// Config current HT Protection mode.
++	//
++	pmlmeinfo->HT_protection = pmlmeinfo->HT_info.infos[1] & 0x3;
++
++	
++	
++#if 0 //move to rtw_update_sta_info_client()
++	//for A-MPDU Rx reordering buffer control for bmc_sta & sta_info
++	//if A-MPDU Rx is enabled, reseting  rx_ordering_ctrl wstart_b(indicate_seq) to default value=0xffff
++	//todo: check if AP can send A-MPDU packets
++	bmc_sta = rtw_get_bcmc_stainfo(padapter);
++	if(bmc_sta)
++	{
++		for(i=0; i < 16 ; i++)
++		{
++			//preorder_ctrl = &precvpriv->recvreorder_ctrl[i];
++			preorder_ctrl = &bmc_sta->recvreorder_ctrl[i];
++			preorder_ctrl->enable = _FALSE;
++			preorder_ctrl->indicate_seq = 0xffff;
++			#ifdef DBG_RX_SEQ
++			DBG_871X("DBG_RX_SEQ %s:%d indicate_seq:%u \n", __FUNCTION__, __LINE__,
++				preorder_ctrl->indicate_seq);
++			#endif
++			preorder_ctrl->wend_b= 0xffff;
++			preorder_ctrl->wsize_b = 64;//max_ampdu_sz;//ex. 32(kbytes) -> wsize_b=32
++		}
++	}
++
++	psta = rtw_get_stainfo(&padapter->stapriv, pcur_network->network.MacAddress);
++	if(psta)
++	{
++		for(i=0; i < 16 ; i++)
++		{
++			//preorder_ctrl = &precvpriv->recvreorder_ctrl[i];
++			preorder_ctrl = &psta->recvreorder_ctrl[i];
++			preorder_ctrl->enable = _FALSE;
++			preorder_ctrl->indicate_seq = 0xffff;
++			#ifdef DBG_RX_SEQ
++			DBG_871X("DBG_RX_SEQ %s:%d indicate_seq:%u \n", __FUNCTION__, __LINE__,
++				preorder_ctrl->indicate_seq);
++			#endif
++			preorder_ctrl->wend_b= 0xffff;
++			preorder_ctrl->wsize_b = 64;//max_ampdu_sz;//ex. 32(kbytes) -> wsize_b=32
++		}
++	}
++#endif	
++
++}
++
++void rtw_issue_addbareq_cmd(_adapter *padapter, struct xmit_frame *pxmitframe)
++{
++	u8 issued;
++	int priority;
++	struct sta_info *psta=NULL;
++	struct ht_priv	*phtpriv;
++	struct pkt_attrib *pattrib =&pxmitframe->attrib;
++	s32 bmcst = IS_MCAST(pattrib->ra);
++
++	if(bmcst || (padapter->mlmepriv.LinkDetectInfo.bTxBusyTraffic == _FALSE))
++		return;
++	
++	priority = pattrib->priority;
++
++	if (pattrib->psta)
++		psta = pattrib->psta;
++	else
++	{
++		DBG_871X("%s, call rtw_get_stainfo()\n", __func__);
++		psta = rtw_get_stainfo(&padapter->stapriv, pattrib->ra);
++	}	
++	
++	if(psta==NULL)
++	{
++		DBG_871X("%s, psta==NUL\n", __func__);
++		return;
++	}
++
++	if(!(psta->state &_FW_LINKED))
++	{
++		DBG_871X("%s, psta->state(0x%x) != _FW_LINKED\n", __func__, psta->state);
++		return;
++	}	
++
++	
++	phtpriv = &psta->htpriv;
++
++	if((phtpriv->ht_option==_TRUE) && (phtpriv->ampdu_enable==_TRUE)) 
++	{
++		issued = (phtpriv->agg_enable_bitmap>>priority)&0x1;
++		issued |= (phtpriv->candidate_tid_bitmap>>priority)&0x1;
++
++		if(0==issued)
++		{
++			DBG_871X("rtw_issue_addbareq_cmd, p=%d\n", priority);
++			psta->htpriv.candidate_tid_bitmap |= BIT((u8)priority);
++			rtw_addbareq_cmd(padapter,(u8) priority, pattrib->ra);
++		}
++	}
++	
++}
++
++#endif
++
++#ifdef CONFIG_LAYER2_ROAMING
++inline void rtw_set_roaming(_adapter *adapter, u8 to_roaming)
++{
++	if (to_roaming == 0)
++		adapter->mlmepriv.to_join = _FALSE;
++	adapter->mlmepriv.to_roaming = to_roaming;
++}
++
++inline u8 rtw_to_roaming(_adapter *adapter)
++{
++	return adapter->mlmepriv.to_roaming;
++}
++
++void rtw_roaming(_adapter *padapter, struct wlan_network *tgt_network)
++{
++	_irqL irqL;
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++	_rtw_roaming(padapter, tgt_network);
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++}
++void _rtw_roaming(_adapter *padapter, struct wlan_network *tgt_network)
++{
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	int do_join_r;
++
++	struct wlan_network *pnetwork;
++
++	if(tgt_network != NULL)
++		pnetwork = tgt_network;
++	else
++		pnetwork = &pmlmepriv->cur_network;
++	
++	if(0 < rtw_to_roaming(padapter)) {
++		DBG_871X("roaming from %s("MAC_FMT"), length:%d\n",
++				pnetwork->network.Ssid.Ssid, MAC_ARG(pnetwork->network.MacAddress),
++				pnetwork->network.Ssid.SsidLength);
++		_rtw_memcpy(&pmlmepriv->assoc_ssid, &pnetwork->network.Ssid, sizeof(NDIS_802_11_SSID));
++
++		pmlmepriv->assoc_by_bssid = _FALSE;
++
++		while(1) {
++			if( _SUCCESS==(do_join_r=rtw_do_join(padapter)) ) {
++				break;
++			} else {
++				DBG_871X("roaming do_join return %d\n", do_join_r);
++				pmlmepriv->to_roaming--;
++				
++				if(0< rtw_to_roaming(padapter)) {
++					continue;
++				} else {
++					DBG_871X("%s(%d) -to roaming fail, indicate_disconnect\n", __FUNCTION__,__LINE__);
++					rtw_indicate_disconnect(padapter);
++					break;
++				}
++			}
++		}
++	}
++	
++}
++#endif
++
++#ifdef CONFIG_CONCURRENT_MODE
++sint rtw_buddy_adapter_up(_adapter *padapter)
++{	
++	sint res = _FALSE;
++	
++	if(padapter == NULL)
++		return res;
++
++
++	if(padapter->pbuddy_adapter == NULL)
++	{
++		res = _FALSE;
++	}
++	else if( (padapter->pbuddy_adapter->bDriverStopped) || (padapter->pbuddy_adapter->bSurpriseRemoved) ||
++		(padapter->pbuddy_adapter->bup == _FALSE) || (padapter->pbuddy_adapter->hw_init_completed == _FALSE))
++	{		
++		res = _FALSE;
++	}
++	else
++	{
++		res = _TRUE;
++	}	
++
++	return res;	
++
++}
++
++sint check_buddy_fwstate(_adapter *padapter, sint state)
++{
++	if(padapter == NULL)
++		return _FALSE;	
++	
++	if(padapter->pbuddy_adapter == NULL)
++		return _FALSE;	
++		
++	if ((state == WIFI_FW_NULL_STATE) && 
++		(padapter->pbuddy_adapter->mlmepriv.fw_state == WIFI_FW_NULL_STATE))
++		return _TRUE;
++	
++	if (padapter->pbuddy_adapter->mlmepriv.fw_state & state)
++		return _TRUE;
++
++	return _FALSE;
++}
++#endif //CONFIG_CONCURRENT_MODE
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_mlme_ext.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_mlme_ext.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_mlme_ext.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_mlme_ext.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,13600 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _RTW_MLME_EXT_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <wifi.h>
++#include <rtw_mlme_ext.h>
++#include <wlan_bssdef.h>
++#include <mlme_osdep.h>
++#include <recv_osdep.h>
++
++struct mlme_handler mlme_sta_tbl[]={
++	{WIFI_ASSOCREQ,		"OnAssocReq",	&OnAssocReq},
++	{WIFI_ASSOCRSP,		"OnAssocRsp",	&OnAssocRsp},
++	{WIFI_REASSOCREQ,	"OnReAssocReq",	&OnAssocReq},
++	{WIFI_REASSOCRSP,	"OnReAssocRsp",	&OnAssocRsp},
++	{WIFI_PROBEREQ,		"OnProbeReq",	&OnProbeReq},
++	{WIFI_PROBERSP,		"OnProbeRsp",		&OnProbeRsp},
++
++	/*----------------------------------------------------------
++					below 2 are reserved
++	-----------------------------------------------------------*/
++	{0,					"DoReserved",		&DoReserved},
++	{0,					"DoReserved",		&DoReserved},
++	{WIFI_BEACON,		"OnBeacon",		&OnBeacon},
++	{WIFI_ATIM,			"OnATIM",		&OnAtim},
++	{WIFI_DISASSOC,		"OnDisassoc",		&OnDisassoc},
++	{WIFI_AUTH,			"OnAuth",		&OnAuthClient},
++	{WIFI_DEAUTH,		"OnDeAuth",		&OnDeAuth},
++	{WIFI_ACTION,		"OnAction",		&OnAction},
++};
++
++#ifdef _CONFIG_NATIVEAP_MLME_
++struct mlme_handler mlme_ap_tbl[]={
++	{WIFI_ASSOCREQ,		"OnAssocReq",	&OnAssocReq},
++	{WIFI_ASSOCRSP,		"OnAssocRsp",	&OnAssocRsp},
++	{WIFI_REASSOCREQ,	"OnReAssocReq",	&OnAssocReq},
++	{WIFI_REASSOCRSP,	"OnReAssocRsp",	&OnAssocRsp},
++	{WIFI_PROBEREQ,		"OnProbeReq",	&OnProbeReq},
++	{WIFI_PROBERSP,		"OnProbeRsp",		&OnProbeRsp},
++
++	/*----------------------------------------------------------
++					below 2 are reserved
++	-----------------------------------------------------------*/
++	{0,					"DoReserved",		&DoReserved},
++	{0,					"DoReserved",		&DoReserved},
++	{WIFI_BEACON,		"OnBeacon",		&OnBeacon},
++	{WIFI_ATIM,			"OnATIM",		&OnAtim},
++	{WIFI_DISASSOC,		"OnDisassoc",		&OnDisassoc},
++	{WIFI_AUTH,			"OnAuth",		&OnAuth},
++	{WIFI_DEAUTH,		"OnDeAuth",		&OnDeAuth},
++	{WIFI_ACTION,		"OnAction",		&OnAction},
++};
++#endif
++
++struct action_handler OnAction_tbl[]={
++	{RTW_WLAN_CATEGORY_SPECTRUM_MGMT,	 "ACTION_SPECTRUM_MGMT", on_action_spct},
++	{RTW_WLAN_CATEGORY_QOS, "ACTION_QOS", &OnAction_qos},
++	{RTW_WLAN_CATEGORY_DLS, "ACTION_DLS", &OnAction_dls},
++	{RTW_WLAN_CATEGORY_BACK, "ACTION_BACK", &OnAction_back},
++	{RTW_WLAN_CATEGORY_PUBLIC, "ACTION_PUBLIC", on_action_public},
++	{RTW_WLAN_CATEGORY_RADIO_MEASUREMENT, "ACTION_RADIO_MEASUREMENT", &DoReserved},
++	{RTW_WLAN_CATEGORY_FT, "ACTION_FT",	&DoReserved},
++	{RTW_WLAN_CATEGORY_HT,	"ACTION_HT",	&OnAction_ht},
++#ifdef CONFIG_IEEE80211W
++	{RTW_WLAN_CATEGORY_SA_QUERY, "ACTION_SA_QUERY", &OnAction_sa_query},
++#else
++	{RTW_WLAN_CATEGORY_SA_QUERY, "ACTION_SA_QUERY", &DoReserved},
++#endif //CONFIG_IEEE80211W
++	//add for CONFIG_IEEE80211W
++	{RTW_WLAN_CATEGORY_UNPROTECTED_WNM, "ACTION_UNPROTECTED_WNM", &DoReserved},
++	{RTW_WLAN_CATEGORY_SELF_PROTECTED, "ACTION_SELF_PROTECTED", &DoReserved},
++	{RTW_WLAN_CATEGORY_WMM, "ACTION_WMM", &OnAction_wmm},	
++	{RTW_WLAN_CATEGORY_P2P, "ACTION_P2P", &OnAction_p2p},	
++};
++
++
++u8	null_addr[ETH_ALEN]= {0,0,0,0,0,0};
++
++/**************************************************
++OUI definitions for the vendor specific IE
++***************************************************/
++unsigned char	RTW_WPA_OUI[] = {0x00, 0x50, 0xf2, 0x01};
++unsigned char WMM_OUI[] = {0x00, 0x50, 0xf2, 0x02};
++unsigned char	WPS_OUI[] = {0x00, 0x50, 0xf2, 0x04};
++unsigned char	P2P_OUI[] = {0x50,0x6F,0x9A,0x09};
++unsigned char	WFD_OUI[] = {0x50,0x6F,0x9A,0x0A};
++
++unsigned char	WMM_INFO_OUI[] = {0x00, 0x50, 0xf2, 0x02, 0x00, 0x01};
++unsigned char	WMM_PARA_OUI[] = {0x00, 0x50, 0xf2, 0x02, 0x01, 0x01};
++
++unsigned char WPA_TKIP_CIPHER[4] = {0x00, 0x50, 0xf2, 0x02};
++unsigned char RSN_TKIP_CIPHER[4] = {0x00, 0x0f, 0xac, 0x02};
++
++extern unsigned char REALTEK_96B_IE[];
++
++/********************************************************
++MCS rate definitions
++*********************************************************/
++#ifdef CONFIG_DISABLE_MCS13TO15
++unsigned char	MCS_rate_2R_MCS13TO15_OFF[16] = {0xff, 0x1f, 0x0, 0x0, 0x01, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0};
++unsigned char	MCS_rate_2R[16] = {0xff, 0xff, 0x0, 0x0, 0x01, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0};
++#else //CONFIG_DISABLE_MCS13TO15
++unsigned char	MCS_rate_2R[16] = {0xff, 0xff, 0x0, 0x0, 0x01, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0};
++#endif //CONFIG_DISABLE_MCS13TO15
++unsigned char	MCS_rate_1R[16] = {0xff, 0x00, 0x0, 0x0, 0x01, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0};
++
++/********************************************************
++ChannelPlan definitions
++*********************************************************/
++/*static RT_CHANNEL_PLAN	DefaultChannelPlan[RT_CHANNEL_DOMAIN_MAX] = {
++	{{1,2,3,4,5,6,7,8,9,10,11,36,40,44,48,52,56,60,64,100,104,108,112,116,132,136,140,149,153,157,161,165},32},					// 0x00, RT_CHANNEL_DOMAIN_FCC
++	{{1,2,3,4,5,6,7,8,9,10,11,36,40,44,48,52,56,60,64,100,104,108,112,116,136,140,149,153,157,161,165},31},						// 0x01, RT_CHANNEL_DOMAIN_IC
++	{{1,2,3,4,5,6,7,8,9,10,11,12,13,36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140},32},						// 0x02, RT_CHANNEL_DOMAIN_ETSI
++	{{1,2,3,4,5,6,7,8,9,10,11,12,13},13},																					// 0x03, RT_CHANNEL_DOMAIN_SPAIN
++	{{1,2,3,4,5,6,7,8,9,10,11,12,13},13},																					// 0x04, RT_CHANNEL_DOMAIN_FRANCE
++	{{1,2,3,4,5,6,7,8,9,10,11,12,13},13},																					// 0x05, RT_CHANNEL_DOMAIN_MKK
++	{{1,2,3,4,5,6,7,8,9,10,11,12,13},13},																					// 0x06, RT_CHANNEL_DOMAIN_MKK1
++	{{1,2,3,4,5,6,7,8,9,10,11,12,13,36,40,44,48,52,56,60,64},21},																// 0x07, RT_CHANNEL_DOMAIN_ISRAEL
++	{{1,2,3,4,5,6,7,8,9,10,11,12,13,14,36,40,44,48,52,56,60,64},22},															// 0x08, RT_CHANNEL_DOMAIN_TELEC
++	{{1,2,3,4,5,6,7,8,9,10,11,12,13,14},14},																				// 0x09, RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN
++	{{1,2,3,4,5,6,7,8,9,10,11,12,13},13},																					// 0x0A, RT_CHANNEL_DOMAIN_WORLD_WIDE_13
++	{{1,2,3,4,5,6,7,8,9,10,11,56,60,64,100,104,108,112,116,136,140,149,153,157,161,165},26},									// 0x0B, RT_CHANNEL_DOMAIN_TAIWAN
++	{{1,2,3,4,5,6,7,8,9,10,11,12,13,149,153,157,161,165},18},																// 0x0C, RT_CHANNEL_DOMAIN_CHINA
++	{{1,2,3,4,5,6,7,8,9,10,11,36,40,44,48,52,56,60,64,149,153,157,161,165},24},												// 0x0D, RT_CHANNEL_DOMAIN_SINGAPORE_INDIA_MEXICO
++	{{1,2,3,4,5,6,7,8,9,10,11,36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,149,153,157,161,165},31},						// 0x0E, RT_CHANNEL_DOMAIN_KOREA
++	{{1,2,3,4,5,6,7,8,9,10,11,36,40,44,48,52,56,60,64},19},																	// 0x0F, RT_CHANNEL_DOMAIN_TURKEY
++	{{1,2,3,4,5,6,7,8,9,10,11,12,13,36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140},32},						// 0x10, RT_CHANNEL_DOMAIN_JAPAN
++	{{1,2,3,4,5,6,7,8,9,10,11,36,40,44,48,149,153,157,161,165},20},															// 0x11, RT_CHANNEL_DOMAIN_FCC_NO_DFS
++	{{1,2,3,4,5,6,7,8,9,10,11,12,13,36,40,44,48},17},																		// 0x12, RT_CHANNEL_DOMAIN_JAPAN_NO_DFS
++	{{1,2,3,4,5,6,7,8,9,10,11,12,13,36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,149,153,157,161,165},37},	// 0x13, RT_CHANNEL_DOMAIN_WORLD_WIDE_5G
++	{{1,2,3,4,5,6,7,8,9,10,11,56,60,64,149,153,157,161,165},19},																// 0x14, RT_CHANNEL_DOMAIN_TAIWAN_NO_DFS
++};*/
++
++static RT_CHANNEL_PLAN_2G	RTW_ChannelPlan2G[RT_CHANNEL_DOMAIN_2G_MAX] = {
++	{{1,2,3,4,5,6,7,8,9,10,11,12,13},13},		// 0x00, RT_CHANNEL_DOMAIN_2G_WORLD , Passive scan CH 12, 13
++	{{1,2,3,4,5,6,7,8,9,10,11,12,13},13},		// 0x01, RT_CHANNEL_DOMAIN_2G_ETSI1
++	{{1,2,3,4,5,6,7,8,9,10,11},11},			// 0x02, RT_CHANNEL_DOMAIN_2G_FCC1
++	{{1,2,3,4,5,6,7,8,9,10,11,12,13,14},14},	// 0x03, RT_CHANNEL_DOMAIN_2G_MIKK1
++	{{10,11,12,13},4},						// 0x04, RT_CHANNEL_DOMAIN_2G_ETSI2
++	{{},0},									// 0x05, RT_CHANNEL_DOMAIN_2G_NULL
++};
++
++static RT_CHANNEL_PLAN_5G	RTW_ChannelPlan5G[RT_CHANNEL_DOMAIN_5G_MAX] = {
++	{{},0},																					// 0x00, RT_CHANNEL_DOMAIN_5G_NULL
++	{{36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140},19},						// 0x01, RT_CHANNEL_DOMAIN_5G_ETSI1
++	{{36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,149,153,157,161,165},24},	// 0x02, RT_CHANNEL_DOMAIN_5G_ETSI2
++	{{36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,149,153,157,161,165},22},			// 0x03, RT_CHANNEL_DOMAIN_5G_ETSI3
++	{{36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,149,153,157,161,165},24},	// 0x04, RT_CHANNEL_DOMAIN_5G_FCC1
++	{{36,40,44,48,149,153,157,161,165},9},														// 0x05, RT_CHANNEL_DOMAIN_5G_FCC2
++	{{36,40,44,48,52,56,60,64,149,153,157,161,165},13},											// 0x06, RT_CHANNEL_DOMAIN_5G_FCC3
++	{{36,40,44,48,52,56,60,64,149,153,157,161},12},												// 0x07, RT_CHANNEL_DOMAIN_5G_FCC4
++	{{149,153,157,161,165},5},																	// 0x08, RT_CHANNEL_DOMAIN_5G_FCC5
++	{{36,40,44,48,52,56,60,64},8},																// 0x09, RT_CHANNEL_DOMAIN_5G_FCC6
++	{{36,40,44,48,52,56,60,64,100,104,108,112,116,136,140,149,153,157,161,165},20},					// 0x0A, RT_CHANNEL_DOMAIN_5G_FCC7_IC1
++	{{36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,149,153,157,161,165},20},					// 0x0B, RT_CHANNEL_DOMAIN_5G_KCC1
++	{{36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140},19},						// 0x0C, RT_CHANNEL_DOMAIN_5G_MKK1
++	{{36,40,44,48,52,56,60,64},8},																// 0x0D, RT_CHANNEL_DOMAIN_5G_MKK2
++	{{100,104,108,112,116,120,124,128,132,136,140},11},											// 0x0E, RT_CHANNEL_DOMAIN_5G_MKK3
++	{{56,60,64,100,104,108,112,116,136,140,149,153,157,161,165},15},								// 0x0F, RT_CHANNEL_DOMAIN_5G_NCC1
++	{{56,60,64,149,153,157,161,165},8},															// 0x10, RT_CHANNEL_DOMAIN_5G_NCC2
++
++	//===== Driver self defined for old channel plan Compatible ,Remember to modify if have new channel plan definition =====
++	{{36,40,44,48,52,56,60,64,100,104,108,112,116,132,136,140,149,153,157,161,165},21},				// 0x11, RT_CHANNEL_DOMAIN_5G_FCC
++	{{36,40,44,48},4},																			// 0x12, RT_CHANNEL_DOMAIN_5G_JAPAN_NO_DFS
++	{{36,40,44,48,149,153,157,161},8},																// 0x13, RT_CHANNEL_DOMAIN_5G_FCC4_NO_DFS
++};
++
++static RT_CHANNEL_PLAN_MAP	RTW_ChannelPlanMap[RT_CHANNEL_DOMAIN_MAX] = {
++	//===== 0x00 ~ 0x1F , Old Define =====
++	{0x02,0x11},	//0x00, RT_CHANNEL_DOMAIN_FCC
++	{0x02,0x0A},	//0x01, RT_CHANNEL_DOMAIN_IC
++	{0x01,0x01},	//0x02, RT_CHANNEL_DOMAIN_ETSI
++	{0x01,0x00},	//0x03, RT_CHANNEL_DOMAIN_SPAIN
++	{0x01,0x00},	//0x04, RT_CHANNEL_DOMAIN_FRANCE
++	{0x03,0x00},	//0x05, RT_CHANNEL_DOMAIN_MKK
++	{0x03,0x00},	//0x06, RT_CHANNEL_DOMAIN_MKK1
++	{0x01,0x09},	//0x07, RT_CHANNEL_DOMAIN_ISRAEL
++	{0x03,0x09},	//0x08, RT_CHANNEL_DOMAIN_TELEC
++	{0x03,0x00},	//0x09, RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN
++	{0x00,0x00},	//0x0A, RT_CHANNEL_DOMAIN_WORLD_WIDE_13
++	{0x02,0x0F},	//0x0B, RT_CHANNEL_DOMAIN_TAIWAN
++	{0x01,0x08},	//0x0C, RT_CHANNEL_DOMAIN_CHINA
++	{0x02,0x06},	//0x0D, RT_CHANNEL_DOMAIN_SINGAPORE_INDIA_MEXICO
++	{0x02,0x0B},	//0x0E, RT_CHANNEL_DOMAIN_KOREA
++	{0x02,0x09},	//0x0F, RT_CHANNEL_DOMAIN_TURKEY
++	{0x01,0x01},	//0x10, RT_CHANNEL_DOMAIN_JAPAN
++	{0x02,0x05},	//0x11, RT_CHANNEL_DOMAIN_FCC_NO_DFS
++	{0x01,0x12},	//0x12, RT_CHANNEL_DOMAIN_JAPAN_NO_DFS
++	{0x00,0x04},	//0x13, RT_CHANNEL_DOMAIN_WORLD_WIDE_5G
++	{0x02,0x10},	//0x14, RT_CHANNEL_DOMAIN_TAIWAN_NO_DFS
++	{0x00,0x12},	//0x15, RT_CHANNEL_DOMAIN_ETSI_NO_DFS
++	{0x00,0x13},	//0x16, RT_CHANNEL_DOMAIN_KOREA_NO_DFS
++	{0x03,0x12},	//0x17, RT_CHANNEL_DOMAIN_JAPAN_NO_DFS
++	{0x05,0x08},	//0x18, RT_CHANNEL_DOMAIN_PAKISTAN_NO_DFS
++	{0x02,0x08},	//0x19, RT_CHANNEL_DOMAIN_TAIWAN2_NO_DFS
++	{0x00,0x00},	//0x1A,
++	{0x00,0x00},	//0x1B,
++	{0x00,0x00},	//0x1C,
++	{0x00,0x00},	//0x1D,
++	{0x00,0x00},	//0x1E,
++	{0x05,0x04},	//0x1F, RT_CHANNEL_DOMAIN_WORLD_WIDE_ONLY_5G
++	//===== 0x20 ~ 0x7F ,New Define =====
++	{0x00,0x00},	//0x20, RT_CHANNEL_DOMAIN_WORLD_NULL
++	{0x01,0x00},	//0x21, RT_CHANNEL_DOMAIN_ETSI1_NULL
++	{0x02,0x00},	//0x22, RT_CHANNEL_DOMAIN_FCC1_NULL
++	{0x03,0x00},	//0x23, RT_CHANNEL_DOMAIN_MKK1_NULL
++	{0x04,0x00},	//0x24, RT_CHANNEL_DOMAIN_ETSI2_NULL
++	{0x02,0x04},	//0x25, RT_CHANNEL_DOMAIN_FCC1_FCC1
++	{0x00,0x01},	//0x26, RT_CHANNEL_DOMAIN_WORLD_ETSI1
++	{0x03,0x0C},	//0x27, RT_CHANNEL_DOMAIN_MKK1_MKK1
++	{0x00,0x0B},	//0x28, RT_CHANNEL_DOMAIN_WORLD_KCC1
++	{0x00,0x05},	//0x29, RT_CHANNEL_DOMAIN_WORLD_FCC2
++	{0x00,0x00},	//0x2A,
++	{0x00,0x00},	//0x2B,
++	{0x00,0x00},	//0x2C,
++	{0x00,0x00},	//0x2D,
++	{0x00,0x00},	//0x2E,
++	{0x00,0x00},	//0x2F,
++	{0x00,0x06},	//0x30, RT_CHANNEL_DOMAIN_WORLD_FCC3
++	{0x00,0x07},	//0x31, RT_CHANNEL_DOMAIN_WORLD_FCC4
++	{0x00,0x08},	//0x32, RT_CHANNEL_DOMAIN_WORLD_FCC5
++	{0x00,0x09},	//0x33, RT_CHANNEL_DOMAIN_WORLD_FCC6
++	{0x02,0x0A},	//0x34, RT_CHANNEL_DOMAIN_FCC1_FCC7
++	{0x00,0x02},	//0x35, RT_CHANNEL_DOMAIN_WORLD_ETSI2
++	{0x00,0x03},	//0x36, RT_CHANNEL_DOMAIN_WORLD_ETSI3
++	{0x03,0x0D},	//0x37, RT_CHANNEL_DOMAIN_MKK1_MKK2
++	{0x03,0x0E},	//0x38, RT_CHANNEL_DOMAIN_MKK1_MKK3
++	{0x02,0x0F},	//0x39, RT_CHANNEL_DOMAIN_FCC1_NCC1
++	{0x00,0x00},	//0x3A,
++	{0x00,0x00},	//0x3B,
++	{0x00,0x00},	//0x3C,
++	{0x00,0x00},	//0x3D,
++	{0x00,0x00},	//0x3E,
++	{0x00,0x00},	//0x3F,
++	{0x02,0x10},	//0x40, RT_CHANNEL_DOMAIN_FCC1_NCC2
++};
++
++static RT_CHANNEL_PLAN_MAP	RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE = {0x03,0x02}; //use the conbination for max channel numbers
++
++/*
++ * Search the @param ch in given @param ch_set
++ * @ch_set: the given channel set
++ * @ch: the given channel number
++ * 
++ * return the index of channel_num in channel_set, -1 if not found
++ */
++int rtw_ch_set_search_ch(RT_CHANNEL_INFO *ch_set, const u32 ch)
++{
++	int i;
++	for(i=0;ch_set[i].ChannelNum!=0;i++){
++		if(ch == ch_set[i].ChannelNum)
++			break;
++	}
++	
++	if(i >= ch_set[i].ChannelNum)
++		return -1;
++	return i;
++}
++
++/*
++ * Check the @param ch is fit with setband setting of @param adapter
++ * @adapter: the given adapter
++ * @ch: the given channel number
++ * 
++ * return _TRUE when check valid, _FALSE not valid
++ */
++bool rtw_mlme_band_check(_adapter *adapter, const u32 ch)
++{
++	if (adapter->setband == GHZ24_50 /* 2.4G and 5G */
++		|| (adapter->setband == GHZ_24 && ch < 35) /* 2.4G only */
++		|| (adapter->setband == GHZ_50 && ch > 35) /* 5G only */
++	) {
++		return _TRUE;
++	}
++	return _FALSE;
++}
++
++/****************************************************************************
++
++Following are the initialization functions for WiFi MLME
++
++*****************************************************************************/
++
++int init_hw_mlme_ext(_adapter *padapter)
++{
++	struct	mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
++
++	//set_opmode_cmd(padapter, infra_client_with_mlme);//removed
++
++	set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode);
++
++	return _SUCCESS;
++}
++
++static void init_mlme_ext_priv_value(_adapter* padapter)
++{
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	//unsigned char default_channel_set[MAX_CHANNEL_NUM] = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 0, 0};
++	unsigned char	mixed_datarate[NumRates] = {_1M_RATE_, _2M_RATE_, _5M_RATE_, _11M_RATE_, _6M_RATE_,_9M_RATE_, _12M_RATE_, _18M_RATE_, _24M_RATE_, _36M_RATE_, _48M_RATE_, _54M_RATE_, 0xff};
++	unsigned char	mixed_basicrate[NumRates] ={_1M_RATE_, _2M_RATE_, _5M_RATE_, _11M_RATE_, _6M_RATE_, _12M_RATE_, _24M_RATE_, 0xff,};
++
++	ATOMIC_SET(&pmlmeext->event_seq, 0);
++	pmlmeext->mgnt_seq = 0;//reset to zero when disconnect at client mode
++#ifdef CONFIG_IEEE80211W
++	pmlmeext->sa_query_seq = 0;
++	pmlmeext->mgnt_80211w_IPN=0;
++	pmlmeext->mgnt_80211w_IPN_rx=0;
++#endif //CONFIG_IEEE80211W
++	pmlmeext->cur_channel = padapter->registrypriv.channel;
++	pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_20;
++	pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++
++	pmlmeext->retry = 0;
++
++	pmlmeext->cur_wireless_mode = padapter->registrypriv.wireless_mode;
++
++	//_rtw_memcpy(pmlmeext->channel_set, DefaultChannelPlan[padapter->mlmepriv.ChannelPlan].Channel, DefaultChannelPlan[padapter->mlmepriv.ChannelPlan].Len);
++	//_rtw_memcpy(pmlmeext->channel_set, default_channel_set, MAX_CHANNEL_NUM);
++	_rtw_memcpy(pmlmeext->datarate, mixed_datarate, NumRates);
++	_rtw_memcpy(pmlmeext->basicrate, mixed_basicrate, NumRates);
++
++	if(pmlmeext->cur_channel > 14)
++		pmlmeext->tx_rate = IEEE80211_OFDM_RATE_6MB;
++	else
++		pmlmeext->tx_rate = IEEE80211_CCK_RATE_1MB;
++
++	pmlmeext->sitesurvey_res.state = SCAN_DISABLE;
++	pmlmeext->sitesurvey_res.channel_idx = 0;
++	pmlmeext->sitesurvey_res.bss_cnt = 0;
++	pmlmeext->scan_abort = _FALSE;
++
++	pmlmeinfo->state = WIFI_FW_NULL_STATE;
++	pmlmeinfo->reauth_count = 0;
++	pmlmeinfo->reassoc_count = 0;
++	pmlmeinfo->link_count = 0;
++	pmlmeinfo->auth_seq = 0;
++	pmlmeinfo->auth_algo = dot11AuthAlgrthm_Open;
++	pmlmeinfo->key_index = 0;
++	pmlmeinfo->iv = 0;
++
++	pmlmeinfo->enc_algo = _NO_PRIVACY_;
++	pmlmeinfo->authModeToggle = 0;
++
++	_rtw_memset(pmlmeinfo->chg_txt, 0, 128);
++
++	pmlmeinfo->slotTime = SHORT_SLOT_TIME;
++	pmlmeinfo->preamble_mode = PREAMBLE_AUTO;
++
++	pmlmeinfo->dialogToken = 0;
++
++	pmlmeext->action_public_rxseq = 0xffff;
++	pmlmeext->action_public_dialog_token = 0xff;
++}
++
++static int has_channel(RT_CHANNEL_INFO *channel_set,
++					   u8 chanset_size,
++					   u8 chan) {
++	int i;
++
++	for (i = 0; i < chanset_size; i++) {
++		if (channel_set[i].ChannelNum == chan) {
++			return 1;
++		}
++	}
++
++	return 0;
++}
++
++static void init_channel_list(_adapter *padapter, RT_CHANNEL_INFO *channel_set,
++							  u8 chanset_size,
++							  struct p2p_channels *channel_list) {
++
++	struct p2p_oper_class_map op_class[] = {
++		{ IEEE80211G,  81,   1,  13,  1, BW20 },
++		{ IEEE80211G,  82,  14,  14,  1, BW20 },
++#if 0 /* Do not enable HT40 on 2 GHz */
++		{ IEEE80211G,  83,   1,   9,  1, BW40PLUS },
++		{ IEEE80211G,  84,   5,  13,  1, BW40MINUS },
++#endif
++		{ IEEE80211A, 115,  36,  48,  4, BW20 },
++		{ IEEE80211A, 116,  36,  44,  8, BW40PLUS },
++		{ IEEE80211A, 117,  40,  48,  8, BW40MINUS },
++		{ IEEE80211A, 124, 149, 161,  4, BW20 },
++		{ IEEE80211A, 125, 149, 169,  4, BW20 },
++		{ IEEE80211A, 126, 149, 157,  8, BW40PLUS },
++		{ IEEE80211A, 127, 153, 161,  8, BW40MINUS },
++		{ -1, 0, 0, 0, 0, BW20 }
++	};
++
++	int cla, op;
++
++	cla = 0;
++
++	for (op = 0; op_class[op].op_class; op++) {
++		u8 ch;
++		struct p2p_oper_class_map *o = &op_class[op];
++		struct p2p_reg_class *reg = NULL;
++
++		for (ch = o->min_chan; ch <= o->max_chan; ch += o->inc) {
++			if (!has_channel(channel_set, chanset_size, ch)) {
++				continue;
++			}
++
++			if ((0 == padapter->registrypriv.ht_enable) && (8 == o->inc))
++				continue;
++
++			if ((0 == (padapter->registrypriv.cbw40_enable & BIT(1))) &&
++				((BW40MINUS == o->bw) || (BW40PLUS == o->bw)))
++				continue;
++				
++			if (reg == NULL) {
++				reg = &channel_list->reg_class[cla];
++				cla++;
++				reg->reg_class = o->op_class;
++				reg->channels = 0;
++			}
++			reg->channel[reg->channels] = ch;
++			reg->channels++;
++		}
++	}
++	channel_list->reg_classes = cla;
++
++}
++
++static u8 init_channel_set(_adapter* padapter, u8 ChannelPlan, RT_CHANNEL_INFO *channel_set)
++{
++	u8	index,chanset_size = 0;
++	u8	b5GBand = _FALSE, b2_4GBand = _FALSE;
++	u8	Index2G = 0, Index5G=0;
++
++	_rtw_memset(channel_set, 0, sizeof(RT_CHANNEL_INFO)*MAX_CHANNEL_NUM);
++
++	if(ChannelPlan >= RT_CHANNEL_DOMAIN_MAX && ChannelPlan != RT_CHANNEL_DOMAIN_REALTEK_DEFINE)
++	{
++		DBG_871X("ChannelPlan ID %x error !!!!!\n",ChannelPlan);
++		return chanset_size;
++	}
++
++	if(padapter->registrypriv.wireless_mode & WIRELESS_11G)
++	{
++		b2_4GBand = _TRUE;
++		if(RT_CHANNEL_DOMAIN_REALTEK_DEFINE == ChannelPlan)
++			Index2G = RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE.Index2G;
++		else
++			Index2G = RTW_ChannelPlanMap[ChannelPlan].Index2G;
++	}
++
++	if(padapter->registrypriv.wireless_mode & WIRELESS_11A)
++	{
++		b5GBand = _TRUE;
++		if(RT_CHANNEL_DOMAIN_REALTEK_DEFINE == ChannelPlan)
++			Index5G = RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE.Index5G;
++		else
++			Index5G = RTW_ChannelPlanMap[ChannelPlan].Index5G;
++	}
++
++	if(b2_4GBand)
++	{
++		for(index=0;index<RTW_ChannelPlan2G[Index2G].Len;index++)
++		{
++			channel_set[chanset_size].ChannelNum = RTW_ChannelPlan2G[Index2G].Channel[index];
++
++			if(RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN == ChannelPlan) //Channel 1~11 is active, and 12~14 is passive
++			{
++				if(channel_set[chanset_size].ChannelNum >= 1 && channel_set[chanset_size].ChannelNum <= 11)
++					channel_set[chanset_size].ScanType = SCAN_ACTIVE;
++				else if((channel_set[chanset_size].ChannelNum  >= 12 && channel_set[chanset_size].ChannelNum  <= 14))
++					channel_set[chanset_size].ScanType  = SCAN_PASSIVE;			
++			}
++			else if(RT_CHANNEL_DOMAIN_WORLD_WIDE_13 == ChannelPlan ||
++				RT_CHANNEL_DOMAIN_WORLD_WIDE_5G == ChannelPlan ||
++				RT_CHANNEL_DOMAIN_2G_WORLD == Index2G)// channel 12~13, passive scan
++			{
++				if(channel_set[chanset_size].ChannelNum <= 11)
++					channel_set[chanset_size].ScanType = SCAN_ACTIVE;
++				else
++					channel_set[chanset_size].ScanType = SCAN_PASSIVE;
++			}
++			else
++			{
++				channel_set[chanset_size].ScanType = SCAN_ACTIVE;
++			}
++
++			chanset_size++;
++		}
++	}
++
++	if(b5GBand)
++	{
++		for(index=0;index<RTW_ChannelPlan5G[Index5G].Len;index++)
++		{
++#ifdef CONFIG_DFS
++			channel_set[chanset_size].ChannelNum = RTW_ChannelPlan5G[Index5G].Channel[index];
++			if ( channel_set[chanset_size].ChannelNum <= 48 
++				|| channel_set[chanset_size].ChannelNum >= 149 )
++			{
++				if(RT_CHANNEL_DOMAIN_WORLD_WIDE_5G == ChannelPlan)//passive scan for all 5G channels
++					channel_set[chanset_size].ScanType = SCAN_PASSIVE;
++				else
++					channel_set[chanset_size].ScanType = SCAN_ACTIVE;
++			}
++			else
++			{
++				channel_set[chanset_size].ScanType = SCAN_PASSIVE;
++			}
++			chanset_size++;
++#else /* CONFIG_DFS */
++			if ( RTW_ChannelPlan5G[Index5G].Channel[index] <= 48 
++				|| RTW_ChannelPlan5G[Index5G].Channel[index] >= 149 ) {
++				channel_set[chanset_size].ChannelNum = RTW_ChannelPlan5G[Index5G].Channel[index];
++				if(RT_CHANNEL_DOMAIN_WORLD_WIDE_5G == ChannelPlan)//passive scan for all 5G channels
++					channel_set[chanset_size].ScanType = SCAN_PASSIVE;
++				else
++					channel_set[chanset_size].ScanType = SCAN_ACTIVE;
++				DBG_871X("%s(): channel_set[%d].ChannelNum = %d\n", __FUNCTION__, chanset_size, channel_set[chanset_size].ChannelNum);
++				chanset_size++;
++			}
++#endif /* CONFIG_DFS */
++		}
++	}
++
++	return chanset_size;
++}
++
++int	init_mlme_ext_priv(_adapter* padapter)
++{
++	int	res = _SUCCESS;
++	struct registry_priv* pregistrypriv = &padapter->registrypriv;
++	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	// We don't need to memset padapter->XXX to zero, because adapter is allocated by rtw_zvmalloc().
++	//_rtw_memset((u8 *)pmlmeext, 0, sizeof(struct mlme_ext_priv));
++
++	pmlmeext->padapter = padapter;
++
++	//fill_fwpriv(padapter, &(pmlmeext->fwpriv));
++
++	init_mlme_ext_priv_value(padapter);
++	pmlmeinfo->bAcceptAddbaReq = pregistrypriv->bAcceptAddbaReq;
++	
++	init_mlme_ext_timer(padapter);
++
++#ifdef CONFIG_AP_MODE
++	init_mlme_ap_info(padapter);	
++#endif
++
++	pmlmeext->max_chan_nums = init_channel_set(padapter, pmlmepriv->ChannelPlan,pmlmeext->channel_set);
++	init_channel_list(padapter, pmlmeext->channel_set, pmlmeext->max_chan_nums, &pmlmeext->channel_list);
++	
++	pmlmeext->chan_scan_time = SURVEY_TO;
++	pmlmeext->mlmeext_init = _TRUE;
++
++
++#ifdef CONFIG_ACTIVE_KEEP_ALIVE_CHECK	
++	pmlmeext->active_keep_alive_check = _TRUE;
++#endif
++
++	return res;
++
++}
++
++void free_mlme_ext_priv (struct mlme_ext_priv *pmlmeext)
++{
++	_adapter *padapter = pmlmeext->padapter;
++
++	if (!padapter)
++		return;
++
++	if (padapter->bDriverStopped == _TRUE)
++	{
++		_cancel_timer_ex(&pmlmeext->survey_timer);
++		_cancel_timer_ex(&pmlmeext->link_timer);
++		//_cancel_timer_ex(&pmlmeext->ADDBA_timer);
++	}
++}
++
++static u8 cmp_pkt_chnl_diff(_adapter *padapter,u8* pframe,uint packet_len)
++{	// if the channel is same, return 0. else return channel differential	
++	uint len;
++	u8 channel;	
++	u8 *p;		
++	p = rtw_get_ie(pframe + WLAN_HDR_A3_LEN + _BEACON_IE_OFFSET_, _DSSET_IE_, &len, packet_len - _BEACON_IE_OFFSET_);	
++	if (p)	
++	{	
++		channel = *(p + 2);		
++		if(padapter->mlmeextpriv.cur_channel >= channel)		
++		{			
++			return (padapter->mlmeextpriv.cur_channel - channel);		
++		}		
++		else		
++		{			
++			return (channel-padapter->mlmeextpriv.cur_channel);		
++		}	
++	}	
++	else
++	{		
++		return 0;	
++	}
++}
++
++static void _mgt_dispatcher(_adapter *padapter, struct mlme_handler *ptable, union recv_frame *precv_frame)
++{
++	u8 bc_addr[ETH_ALEN] = {0xff,0xff,0xff,0xff,0xff,0xff};
++	u8 *pframe = precv_frame->u.hdr.rx_data; 
++
++	  if(ptable->func)
++        {
++       	 //receive the frames that ra(a1) is my address or ra(a1) is bc address.
++		if (!_rtw_memcmp(GetAddr1Ptr(pframe), myid(&padapter->eeprompriv), ETH_ALEN) &&
++			!_rtw_memcmp(GetAddr1Ptr(pframe), bc_addr, ETH_ALEN)) 
++		{
++			return;
++		}
++		
++		ptable->func(padapter, precv_frame);
++        }
++	
++}
++
++void mgt_dispatcher(_adapter *padapter, union recv_frame *precv_frame)
++{
++	int index;
++	struct mlme_handler *ptable;
++#ifdef CONFIG_AP_MODE
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++#endif //CONFIG_AP_MODE
++	u8 bc_addr[ETH_ALEN] = {0xff,0xff,0xff,0xff,0xff,0xff};
++	u8 *pframe = precv_frame->u.hdr.rx_data;
++	struct sta_info *psta = rtw_get_stainfo(&padapter->stapriv, GetAddr2Ptr(pframe));
++
++	RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_,
++		 ("+mgt_dispatcher: type(0x%x) subtype(0x%x)\n",
++		  GetFrameType(pframe), GetFrameSubType(pframe)));
++
++#if 0
++	{
++		u8 *pbuf;
++		pbuf = GetAddr1Ptr(pframe);
++		DBG_871X("A1-%x:%x:%x:%x:%x:%x\n", *pbuf, *(pbuf+1), *(pbuf+2), *(pbuf+3), *(pbuf+4), *(pbuf+5));
++		pbuf = GetAddr2Ptr(pframe);
++		DBG_871X("A2-%x:%x:%x:%x:%x:%x\n", *pbuf, *(pbuf+1), *(pbuf+2), *(pbuf+3), *(pbuf+4), *(pbuf+5));
++		pbuf = GetAddr3Ptr(pframe);
++		DBG_871X("A3-%x:%x:%x:%x:%x:%x\n", *pbuf, *(pbuf+1), *(pbuf+2), *(pbuf+3), *(pbuf+4), *(pbuf+5));
++	}
++#endif
++
++	if (GetFrameType(pframe) != WIFI_MGT_TYPE)
++	{
++		RT_TRACE(_module_rtl871x_mlme_c_, _drv_err_, ("mgt_dispatcher: type(0x%x) error!\n", GetFrameType(pframe)));
++		return;
++	}
++
++	//receive the frames that ra(a1) is my address or ra(a1) is bc address.
++	if (!_rtw_memcmp(GetAddr1Ptr(pframe), myid(&padapter->eeprompriv), ETH_ALEN) &&
++		!_rtw_memcmp(GetAddr1Ptr(pframe), bc_addr, ETH_ALEN))
++	{
++		return;
++	}
++
++	ptable = mlme_sta_tbl;
++
++	index = GetFrameSubType(pframe) >> 4;
++
++#ifdef CONFIG_TDLS
++	if((index << 4)==WIFI_ACTION){
++		//category==RTW_WLAN_CATEGORY_PUBLIC, action==TDLS_DISCOVERY_RESPONSE
++		if(*(pframe + IEEE80211_MGMT_HDR_LEN ) == RTW_WLAN_CATEGORY_PUBLIC
++			&& *(pframe + IEEE80211_MGMT_HDR_LEN + 1) == TDLS_DISCOVERY_RESPONSE )
++		{
++			DBG_871X("recv tdls discovery response frame\n");
++			On_TDLS_Dis_Rsp(padapter, precv_frame);
++		}
++	}
++#endif //CONFIG_TDLS
++
++	if (index > 13)
++	{
++		RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("Currently we do not support reserved sub-fr-type=%d\n", index));
++		return;
++	}
++	ptable += index;
++
++#if 1
++	if (psta != NULL)
++	{
++		if (GetRetry(pframe))
++		{
++			if (precv_frame->u.hdr.attrib.seq_num == psta->RxMgmtFrameSeqNum)
++			{
++				/* drop the duplicate management frame */
++				DBG_871X("Drop duplicate management frame with seq_num = %d.\n", precv_frame->u.hdr.attrib.seq_num);
++				return;
++			}
++		}
++		psta->RxMgmtFrameSeqNum = precv_frame->u.hdr.attrib.seq_num;
++	}
++#else
++
++	if(GetRetry(pframe))
++	{
++		//RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("drop due to decache!\n"));
++		//return;
++	}
++#endif
++
++#ifdef CONFIG_AP_MODE
++	switch (GetFrameSubType(pframe)) 
++	{
++		case WIFI_AUTH:
++			if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE)
++				ptable->func = &OnAuth;
++			else
++				ptable->func = &OnAuthClient;
++			//pass through
++		case WIFI_ASSOCREQ:
++		case WIFI_REASSOCREQ:
++			_mgt_dispatcher(padapter, ptable, precv_frame);	
++#ifdef CONFIG_HOSTAPD_MLME				
++			if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE)
++				rtw_hostapd_mlme_rx(padapter, precv_frame);
++#endif			
++			break;
++		case WIFI_PROBEREQ:
++			if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE)
++			{
++#ifdef CONFIG_HOSTAPD_MLME		
++				rtw_hostapd_mlme_rx(padapter, precv_frame);		
++#else
++				_mgt_dispatcher(padapter, ptable, precv_frame);
++#endif
++			}
++			else
++				_mgt_dispatcher(padapter, ptable, precv_frame);
++			break;
++		case WIFI_BEACON:			
++			_mgt_dispatcher(padapter, ptable, precv_frame);
++			break;
++		case WIFI_ACTION:
++			//if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE)
++			_mgt_dispatcher(padapter, ptable, precv_frame);		
++			break;
++		default:
++			_mgt_dispatcher(padapter, ptable, precv_frame);	
++			if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE)
++				rtw_hostapd_mlme_rx(padapter, precv_frame);			
++			break;
++	}
++#else
++
++	_mgt_dispatcher(padapter, ptable, precv_frame);	
++	
++#endif
++
++}
++
++#ifdef CONFIG_P2P
++u32 p2p_listen_state_process(_adapter *padapter, unsigned char *da)
++{
++	bool response = _TRUE;
++
++#ifdef CONFIG_IOCTL_CFG80211
++	if( padapter->wdinfo.driver_interface == DRIVER_CFG80211 )
++	{
++		if (wdev_to_priv(padapter->rtw_wdev)->p2p_enabled == _FALSE
++			|| padapter->mlmepriv.wps_probe_resp_ie == NULL
++			|| padapter->mlmepriv.p2p_probe_resp_ie == NULL
++		)
++		{
++			DBG_871X("DON'T issue_probersp_p2p: p2p_enabled:%d, wps_probe_resp_ie:%p, p2p_probe_resp_ie:%p\n",
++				wdev_to_priv(padapter->rtw_wdev)->p2p_enabled,
++				padapter->mlmepriv.wps_probe_resp_ie,
++				padapter->mlmepriv.p2p_probe_resp_ie);
++			response = _FALSE;
++		}
++	}
++	else
++#endif //CONFIG_IOCTL_CFG80211
++	if( padapter->wdinfo.driver_interface == DRIVER_WEXT )
++	{
++		//	do nothing if the device name is empty
++		if ( !padapter->wdinfo.device_name_len )
++		{
++			response	= _FALSE;
++		}
++	}
++
++	if (response == _TRUE)
++		issue_probersp_p2p( padapter, da);
++	
++	return _SUCCESS;
++}
++#endif //CONFIG_P2P
++
++
++/****************************************************************************
++
++Following are the callback functions for each subtype of the management frames
++
++*****************************************************************************/
++
++unsigned int OnProbeReq(_adapter *padapter, union recv_frame *precv_frame)
++{
++	unsigned int	ielen;
++	unsigned char	*p;
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	WLAN_BSSID_EX 	*cur = &(pmlmeinfo->network);
++	u8 *pframe = precv_frame->u.hdr.rx_data;
++	uint len = precv_frame->u.hdr.len;
++	u8 is_valid_p2p_probereq = _FALSE;
++
++#ifdef CONFIG_P2P
++	struct wifidirect_info	*pwdinfo = &(padapter->wdinfo);
++	struct rx_pkt_attrib	*pattrib = &precv_frame->u.hdr.attrib;
++	u8 wifi_test_chk_rate = 1;
++	
++	if (	!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE) && 
++		!rtw_p2p_chk_state(pwdinfo, P2P_STATE_IDLE) && 
++		!rtw_p2p_chk_role(pwdinfo, P2P_ROLE_CLIENT) &&
++		!rtw_p2p_chk_state(pwdinfo, P2P_STATE_FIND_PHASE_SEARCH) &&
++		!rtw_p2p_chk_state(pwdinfo, P2P_STATE_SCAN)
++	   )
++	{
++		//	Commented by Albert 2011/03/17
++		//	mcs_rate = 0 -> CCK 1M rate
++		//	mcs_rate = 1 -> CCK 2M rate
++		//	mcs_rate = 2 -> CCK 5.5M rate
++		//	mcs_rate = 3 -> CCK 11M rate
++		//	In the P2P mode, the driver should not support the CCK rate
++
++		//	Commented by Kurt 2012/10/16
++		//	IOT issue: Google Nexus7 use 1M rate to send p2p_probe_req after GO nego completed and Nexus7 is client
++#ifdef CONFIG_WIFI_TEST
++		if ( pattrib->mcs_rate <= 3 )
++		{
++			wifi_test_chk_rate = 0;
++		}
++#endif //CONFIG_WIFI_TEST
++
++		if( wifi_test_chk_rate == 1 )
++		{
++			if((is_valid_p2p_probereq = process_probe_req_p2p_ie(pwdinfo, pframe, len)) == _TRUE)
++			{
++				if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_DEVICE))
++				{
++					p2p_listen_state_process( padapter,  get_sa(pframe));
++
++					return _SUCCESS;	
++				}
++
++				if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO))
++				{
++					goto _continue;
++				}
++			}
++		}
++	}
++
++_continue:
++#endif //CONFIG_P2P
++
++	if(check_fwstate(pmlmepriv, WIFI_STATION_STATE))
++	{
++		return _SUCCESS;
++	}
++
++	if(check_fwstate(pmlmepriv, _FW_LINKED) == _FALSE && 
++		check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE|WIFI_AP_STATE)==_FALSE)
++	{
++		return _SUCCESS;
++	}
++
++
++	//DBG_871X("+OnProbeReq\n");
++
++#ifdef CONFIG_AUTO_AP_MODE
++	if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE &&
++			pmlmepriv->cur_network.join_res == _TRUE)
++	{
++		_irqL	irqL;
++		struct sta_info	*psta;
++		u8 *mac_addr, *peer_addr;
++		struct sta_priv *pstapriv = &padapter->stapriv;
++		u8 RC_OUI[4]={0x00,0xE0,0x4C,0x0A};
++		//EID[1] + EID_LEN[1] + RC_OUI[4] + MAC[6] + PairingID[2] + ChannelNum[2]
++
++		p = rtw_get_ie(pframe + WLAN_HDR_A3_LEN + _PROBEREQ_IE_OFFSET_, _VENDOR_SPECIFIC_IE_, (int *)&ielen,
++			len - WLAN_HDR_A3_LEN - _PROBEREQ_IE_OFFSET_);
++
++		if(!p || ielen !=14)
++			goto _non_rc_device;
++
++		if(!_rtw_memcmp(p+2, RC_OUI, sizeof(RC_OUI)))
++			goto _non_rc_device;
++
++		if(!_rtw_memcmp(p+6, get_sa(pframe), ETH_ALEN))
++		{
++			DBG_871X("%s, do rc pairing ("MAC_FMT"), but mac addr mismatch!("MAC_FMT")\n", __FUNCTION__,
++				MAC_ARG(get_sa(pframe)), MAC_ARG(p+6));
++
++			goto _non_rc_device;
++		}
++
++		DBG_871X("%s, got the pairing device("MAC_FMT")\n", __FUNCTION__,  MAC_ARG(get_sa(pframe)));
++
++		//new a station
++		psta = rtw_get_stainfo(pstapriv, get_sa(pframe));
++		if (psta == NULL)
++		{
++			// allocate a new one
++			DBG_871X("going to alloc stainfo for rc="MAC_FMT"\n",  MAC_ARG(get_sa(pframe)));
++			psta = rtw_alloc_stainfo(pstapriv, get_sa(pframe));
++			if (psta == NULL)
++			{
++				//TODO:
++				DBG_871X(" Exceed the upper limit of supported clients...\n");
++				return _SUCCESS;
++			}
++
++			_enter_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++			if (rtw_is_list_empty(&psta->asoc_list))
++			{
++				psta->expire_to = pstapriv->expire_to;
++				rtw_list_insert_tail(&psta->asoc_list, &pstapriv->asoc_list);
++				pstapriv->asoc_list_cnt++;
++			}
++			_exit_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++
++			//generate pairing ID
++			mac_addr = myid(&(padapter->eeprompriv));
++			peer_addr = psta->hwaddr;
++			psta->pid = (u16)(((mac_addr[4]<<8) + mac_addr[5]) + ((peer_addr[4]<<8) + peer_addr[5]));
++
++			//update peer stainfo
++			psta->isrc = _TRUE;
++			//psta->aid = 0;
++			//psta->mac_id = 2;
++
++			/* get a unique AID */
++			if (psta->aid > 0) {
++				DBG_871X("old AID %d\n", psta->aid);
++			} else {
++				for (psta->aid = 1; psta->aid <= NUM_STA; psta->aid++)
++					if (pstapriv->sta_aid[psta->aid - 1] == NULL)
++						break;
++
++				if (psta->aid > pstapriv->max_num_sta) {
++					psta->aid = 0;
++					DBG_871X("no room for more AIDs\n");
++					return _SUCCESS;
++				} else {
++					pstapriv->sta_aid[psta->aid - 1] = psta;
++					DBG_871X("allocate new AID = (%d)\n", psta->aid);
++				}
++			}
++			
++			psta->qos_option = 1;
++			psta->htpriv.ht_option = _TRUE;
++			psta->ieee8021x_blocked = _FALSE;
++			psta->htpriv.ampdu_enable = _FALSE;
++			psta->htpriv.sgi = _FALSE;
++			psta->htpriv.bwmode = HT_CHANNEL_WIDTH_20;
++			psta->htpriv.ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++
++			//rtw_hal_set_odm_var(padapter, HAL_ODM_STA_INFO, psta, _TRUE);
++
++			psta->htpriv.agg_enable_bitmap = 0x0;//reset
++			psta->htpriv.candidate_tid_bitmap = 0x0;//reset
++
++			_rtw_memset((void*)&psta->sta_stats, 0, sizeof(struct stainfo_stats));
++
++			_enter_critical_bh(&psta->lock, &irqL);
++			psta->state |= _FW_LINKED;
++			_exit_critical_bh(&psta->lock, &irqL);
++
++			report_add_sta_event(padapter, psta->hwaddr, psta->aid);
++
++		}
++
++		issue_probersp(padapter, get_sa(pframe), _FALSE);
++
++		return _SUCCESS;
++
++	}
++
++_non_rc_device:
++
++	return _SUCCESS;
++#endif //CONFIG_AUTO_AP_MODE
++
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if(((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) &&
++		check_buddy_fwstate(padapter, _FW_UNDER_LINKING|_FW_UNDER_SURVEY))
++	{
++		//don't process probe req
++		return _SUCCESS;
++	}
++#endif		
++
++	p = rtw_get_ie(pframe + WLAN_HDR_A3_LEN + _PROBEREQ_IE_OFFSET_, _SSID_IE_, (int *)&ielen,
++			len - WLAN_HDR_A3_LEN - _PROBEREQ_IE_OFFSET_);
++
++
++	//check (wildcard) SSID 
++	if (p != NULL)
++	{
++		if(is_valid_p2p_probereq == _TRUE)
++		{
++			goto _issue_probersp;
++		}
++
++		if ( (ielen != 0 && _FALSE ==_rtw_memcmp((void *)(p+2), (void *)cur->Ssid.Ssid, cur->Ssid.SsidLength))
++			|| (ielen == 0 && pmlmeinfo->hidden_ssid_mode)
++		)
++		{
++			return _SUCCESS;
++		}
++
++_issue_probersp:
++
++		if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE && 
++			pmlmepriv->cur_network.join_res == _TRUE)
++		{
++			//DBG_871X("+issue_probersp during ap mode\n");
++			issue_probersp(padapter, get_sa(pframe), is_valid_p2p_probereq);		
++		}
++
++	}
++
++	return _SUCCESS;
++
++}
++
++unsigned int OnProbeRsp(_adapter *padapter, union recv_frame *precv_frame)
++{
++	struct sta_info		*psta;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct sta_priv		*pstapriv = &padapter->stapriv;
++	u8	*pframe = precv_frame->u.hdr.rx_data;
++#ifdef CONFIG_P2P
++	struct wifidirect_info	*pwdinfo = &padapter->wdinfo;
++#endif
++
++
++#ifdef CONFIG_P2P
++	if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_TX_PROVISION_DIS_REQ))
++	{
++		if ( _TRUE == pwdinfo->tx_prov_disc_info.benable )
++		{
++			if( _rtw_memcmp( pwdinfo->tx_prov_disc_info.peerIFAddr, GetAddr2Ptr(pframe), ETH_ALEN ) )
++			{
++				if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_CLIENT))
++				{
++					pwdinfo->tx_prov_disc_info.benable = _FALSE;
++					issue_p2p_provision_request( padapter,
++												pwdinfo->tx_prov_disc_info.ssid.Ssid, 
++												pwdinfo->tx_prov_disc_info.ssid.SsidLength,
++												pwdinfo->tx_prov_disc_info.peerDevAddr );
++				}
++				else if ( rtw_p2p_chk_role(pwdinfo, P2P_ROLE_DEVICE) || rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO) )
++				{
++					pwdinfo->tx_prov_disc_info.benable = _FALSE;
++					issue_p2p_provision_request( padapter,
++												NULL, 
++												0,
++												pwdinfo->tx_prov_disc_info.peerDevAddr );
++				}
++			}		
++		}
++		return _SUCCESS;
++	}
++	else if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_ING))
++	{
++		if ( _TRUE == pwdinfo->nego_req_info.benable )
++		{
++			DBG_871X( "[%s] P2P State is GONEGO ING!\n", __FUNCTION__ );
++			if( _rtw_memcmp( pwdinfo->nego_req_info.peerDevAddr, GetAddr2Ptr(pframe), ETH_ALEN ) )
++			{
++				pwdinfo->nego_req_info.benable = _FALSE;
++				issue_p2p_GO_request( padapter, pwdinfo->nego_req_info.peerDevAddr);
++			}
++		}
++	}
++	else if( rtw_p2p_chk_state(pwdinfo, P2P_STATE_TX_INVITE_REQ ) )
++	{
++		if ( _TRUE == pwdinfo->invitereq_info.benable )
++		{
++			DBG_871X( "[%s] P2P_STATE_TX_INVITE_REQ!\n", __FUNCTION__ );
++			if( _rtw_memcmp( pwdinfo->invitereq_info.peer_macaddr, GetAddr2Ptr(pframe), ETH_ALEN ) )
++			{
++				pwdinfo->invitereq_info.benable = _FALSE;
++				issue_p2p_invitation_request( padapter, pwdinfo->invitereq_info.peer_macaddr );
++			}
++		}
++	}
++#endif
++
++
++	if (pmlmeext->sitesurvey_res.state == SCAN_PROCESS)
++	{
++		report_survey_event(padapter, precv_frame);	
++#ifdef CONFIG_CONCURRENT_MODE
++		report_survey_event(padapter->pbuddy_adapter, precv_frame);	
++#endif
++#ifdef CONFIG_DUALMAC_CONCURRENT
++		dc_report_survey_event(padapter, precv_frame);
++#endif
++		return _SUCCESS;
++	}
++
++	#if 0 //move to validate_recv_mgnt_frame
++	if (_rtw_memcmp(GetAddr3Ptr(pframe), get_my_bssid(&pmlmeinfo->network), ETH_ALEN))
++	{
++		if (pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS)
++		{
++			if ((psta = rtw_get_stainfo(pstapriv, GetAddr2Ptr(pframe))) != NULL)
++			{
++				psta->sta_stats.rx_mgnt_pkts++;
++			}
++		}
++	}
++	#endif
++	
++	return _SUCCESS;
++	
++}
++
++unsigned int OnBeacon(_adapter *padapter, union recv_frame *precv_frame)
++{
++	int cam_idx;
++	struct sta_info	*psta;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct sta_priv	*pstapriv = &padapter->stapriv;
++	u8 *pframe = precv_frame->u.hdr.rx_data;
++	uint len = precv_frame->u.hdr.len;
++	u8 *p = NULL;
++	u32 ielen = 0;
++
++#ifdef CONFIG_ATTEMPT_TO_FIX_AP_BEACON_ERROR
++	p = rtw_get_ie(pframe + sizeof(struct rtw_ieee80211_hdr_3addr) + _BEACON_IE_OFFSET_, _EXT_SUPPORTEDRATES_IE_, &ielen, precv_frame->u.hdr.len -sizeof(struct rtw_ieee80211_hdr_3addr) - _BEACON_IE_OFFSET_);
++	if ((p != NULL) && (ielen > 0))
++	{
++		if ((*(p + 1 + ielen) == 0x2D) && (*(p + 2 + ielen) != 0x2D))
++		{
++			/* Invalid value 0x2D is detected in Extended Supported Rates (ESR) IE. Try to fix the IE length to avoid failed Beacon parsing. */	
++		       	DBG_871X("[WIFIDBG] Error in ESR IE is detected in Beacon of BSSID:"MAC_FMT". Fix the length of ESR IE to avoid failed Beacon parsing.\n", MAC_ARG(GetAddr3Ptr(pframe)));
++		       	*(p + 1) = ielen - 1;
++		}
++	}
++#endif
++
++	if (pmlmeext->sitesurvey_res.state == SCAN_PROCESS)
++	{
++		report_survey_event(padapter, precv_frame);
++#ifdef CONFIG_CONCURRENT_MODE
++		report_survey_event(padapter->pbuddy_adapter, precv_frame);	
++#endif
++
++#ifdef CONFIG_DUALMAC_CONCURRENT
++		dc_report_survey_event(padapter, precv_frame);
++#endif
++
++		return _SUCCESS;
++	}
++
++	if (_rtw_memcmp(GetAddr3Ptr(pframe), get_my_bssid(&pmlmeinfo->network), ETH_ALEN))
++	{
++		if (pmlmeinfo->state & WIFI_FW_AUTH_NULL)
++		{
++			//check the vendor of the assoc AP
++			pmlmeinfo->assoc_AP_vendor = check_assoc_AP(pframe+sizeof(struct rtw_ieee80211_hdr_3addr), len-sizeof(struct rtw_ieee80211_hdr_3addr));				
++#ifdef CONFIG_P2P_PS
++			// do P2P PS Before link ? , ToDo
++			//process_p2p_ps_ie(padapter, (pframe + WLAN_HDR_A3_LEN), (len - WLAN_HDR_A3_LEN));
++#endif // CONFIG_P2P_PS
++
++			//update TSF Value
++			update_TSF(pmlmeext, pframe, len);
++
++			//start auth
++			start_clnt_auth(padapter);
++
++			return _SUCCESS;
++		}
++
++		if(((pmlmeinfo->state&0x03) == WIFI_FW_STATION_STATE) && (pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS))
++		{
++			if ((psta = rtw_get_stainfo(pstapriv, GetAddr2Ptr(pframe))) != NULL)
++			{
++				#ifdef CONFIG_PATCH_JOIN_WRONG_CHANNEL        
++				//Merge from 8712 FW code
++				if (cmp_pkt_chnl_diff(padapter,pframe,len) != 0)        
++				{            // join wrong channel, deauth and reconnect           
++					issue_deauth(padapter, (&(pmlmeinfo->network))->MacAddress, WLAN_REASON_DEAUTH_LEAVING);
++
++					report_del_sta_event(padapter,(&(pmlmeinfo->network))->MacAddress, WLAN_REASON_JOIN_WRONG_CHANNEL);    		
++					pmlmeinfo->state &= (~WIFI_FW_ASSOC_SUCCESS);    		
++					return _SUCCESS;
++				}        
++				#endif //CONFIG_PATCH_JOIN_WRONG_CHANNEL
++
++				//update WMM, ERP in the beacon
++				//todo: the timer is used instead of the number of the beacon received
++				if ((sta_rx_pkts(psta) & 0xf) == 0)
++				{
++					//DBG_871X("update_bcn_info\n");
++					update_beacon_info(padapter, pframe, len, psta);
++				}
++				
++#ifdef CONFIG_DFS
++				process_csa_ie(padapter, pframe, len);	//channel switch announcement
++#endif //CONFIG_DFS
++
++#ifdef CONFIG_P2P_PS
++				//if(psta->ieee8021x_blocked == _FALSE) // do not allow P2P PS during EAPOL handshake ?
++				process_p2p_ps_ie(padapter, (pframe + WLAN_HDR_A3_LEN), (len - WLAN_HDR_A3_LEN));
++#endif //CONFIG_P2P_PS
++
++				#if 0 //move to validate_recv_mgnt_frame
++				psta->sta_stats.rx_mgnt_pkts++;
++				#endif
++			}
++		}
++		else if((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE)
++		{
++			if ((psta = rtw_get_stainfo(pstapriv, GetAddr2Ptr(pframe))) != NULL)
++			{
++				//update WMM, ERP in the beacon
++				//todo: the timer is used instead of the number of the beacon received
++				if ((sta_rx_pkts(psta) & 0xf) == 0)
++				{
++					//DBG_871X("update_bcn_info\n");
++					update_beacon_info(padapter, pframe, len, psta);
++				}
++
++				#if 0 //move to validate_recv_mgnt_frame
++				psta->sta_stats.rx_mgnt_pkts++;
++				#endif
++			}
++			else
++			{
++				//allocate a new CAM entry for IBSS station
++				if ((cam_idx = allocate_fw_sta_entry(padapter)) == NUM_STA)
++				{
++					goto _END_ONBEACON_;
++				}
++
++				//get supported rate
++				if (update_sta_support_rate(padapter, (pframe + WLAN_HDR_A3_LEN + _BEACON_IE_OFFSET_), (len - WLAN_HDR_A3_LEN - _BEACON_IE_OFFSET_), cam_idx) == _FAIL)
++				{
++					pmlmeinfo->FW_sta_info[cam_idx].status = 0;
++					goto _END_ONBEACON_;
++				}
++
++				//update TSF Value
++				update_TSF(pmlmeext, pframe, len);			
++
++				//report sta add event
++				report_add_sta_event(padapter, GetAddr2Ptr(pframe), cam_idx);
++			}
++		}
++	}
++
++_END_ONBEACON_:
++
++	return _SUCCESS;
++
++}
++
++unsigned int OnAuth(_adapter *padapter, union recv_frame *precv_frame)
++{
++#ifdef CONFIG_AP_MODE
++	_irqL irqL;
++	unsigned int	auth_mode, seq, ie_len;	
++	unsigned char	*sa, *p;	
++	u16	algorithm;
++	int	status;
++	static struct sta_info stat;	
++	struct	sta_info	*pstat=NULL;	
++	struct	sta_priv *pstapriv = &padapter->stapriv;
++	struct security_priv *psecuritypriv = &padapter->securitypriv;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	u8 *pframe = precv_frame->u.hdr.rx_data; 
++	uint len = precv_frame->u.hdr.len;
++
++	
++#ifdef CONFIG_CONCURRENT_MODE	
++	if(((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) &&
++		check_buddy_fwstate(padapter, _FW_UNDER_LINKING|_FW_UNDER_SURVEY))
++	{
++		//don't process auth request;
++		return _SUCCESS;
++	}
++#endif //CONFIG_CONCURRENT_MODE
++
++	if((pmlmeinfo->state&0x03) != WIFI_FW_AP_STATE)
++		return _FAIL;
++
++	DBG_871X("+OnAuth\n");
++	
++	sa = GetAddr2Ptr(pframe);
++	
++	auth_mode = psecuritypriv->dot11AuthAlgrthm;
++	seq = cpu_to_le16(*(u16*)((SIZE_PTR)pframe + WLAN_HDR_A3_LEN + 2));
++	algorithm = cpu_to_le16(*(u16*)((SIZE_PTR)pframe + WLAN_HDR_A3_LEN));
++
++	if (GetPrivacy(pframe))
++	{	
++#if 0 //TODO: SW rtw_wep_decrypt
++		if (SWCRYPTO)
++		{
++			status = rtw_wep_decrypt(priv, pframe, pfrinfo->pktlen,
++				priv->pmib->dot1180211AuthEntry.dot11PrivacyAlgrthm);
++			if (status == FALSE)
++			{
++				SAVE_INT_AND_CLI(flags);
++				RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,"wep-decrypt a Auth frame error!\n");
++				status = _STATS_CHALLENGE_FAIL_;
++				goto auth_fail;
++			}
++		}
++
++		seq = cpu_to_le16(*(unsigned short *)((unsigned int)pframe + WLAN_HDR_A3_LEN + 4 + 2));
++		algorithm = cpu_to_le16(*(unsigned short *)((unsigned int)pframe + WLAN_HDR_A3_LEN + 4));
++#endif
++	}
++
++
++	DBG_871X("auth alg=%x, seq=%X\n", algorithm, seq);
++
++	if (auth_mode == 2 &&
++			psecuritypriv->dot11PrivacyAlgrthm != _WEP40_ &&
++			psecuritypriv->dot11PrivacyAlgrthm != _WEP104_)
++		auth_mode = 0;
++
++	if ((algorithm > 0 && auth_mode == 0) ||	// rx a shared-key auth but shared not enabled
++		(algorithm == 0 && auth_mode == 1) )	// rx a open-system auth but shared-key is enabled
++	{		
++		DBG_871X("auth rejected due to bad alg [alg=%d, auth_mib=%d] %02X%02X%02X%02X%02X%02X\n",
++			algorithm, auth_mode, sa[0], sa[1], sa[2], sa[3], sa[4], sa[5]);
++		
++		status = _STATS_NO_SUPP_ALG_;
++		
++		goto auth_fail;
++	}
++	
++#if 0 //ACL control	
++	phead = &priv->wlan_acl_list;
++	plist = phead->next;
++	//check sa
++	if (acl_mode == 1)		// 1: positive check, only those on acl_list can be connected.
++		res = FAIL;
++	else
++		res = SUCCESS;
++
++	while(plist != phead)
++	{
++		paclnode = list_entry(plist, struct rtw_wlan_acl_node, list);
++		plist = plist->next;
++		if (!memcmp((void *)sa, paclnode->addr, 6)) {
++			if (paclnode->mode & 2) { // deny
++				res = FAIL;
++				break;
++			}
++			else {
++				res = SUCCESS;
++				break;
++			}
++		}
++	}
++
++	if (res != SUCCESS) {
++		RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,"auth abort because ACL!\n");
++		return FAIL;
++	}
++#else
++	if(rtw_access_ctrl(padapter, sa) == _FALSE)
++	{
++		status = _STATS_UNABLE_HANDLE_STA_;
++		goto auth_fail;
++	}	
++#endif
++
++	pstat = rtw_get_stainfo(pstapriv, sa);
++	if (pstat == NULL)
++	{
++		// allocate a new one
++		DBG_871X("going to alloc stainfo for sa="MAC_FMT"\n",  MAC_ARG(sa));
++		pstat = rtw_alloc_stainfo(pstapriv, sa);
++		if (pstat == NULL)
++		{
++			DBG_871X(" Exceed the upper limit of supported clients...\n");
++			status = _STATS_UNABLE_HANDLE_STA_;
++			goto auth_fail;
++		}
++		
++		pstat->state = WIFI_FW_AUTH_NULL;
++		pstat->auth_seq = 0;
++		
++		//pstat->flags = 0;
++		//pstat->capability = 0;
++	}
++	else
++	{		
++		_enter_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++		if(rtw_is_list_empty(&pstat->asoc_list)==_FALSE)
++		{			
++			rtw_list_delete(&pstat->asoc_list);
++			pstapriv->asoc_list_cnt--;
++			if (pstat->expire_to > 0)
++			{
++				//TODO: STA re_auth within expire_to
++			}
++		}
++		_exit_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++		
++		if (seq==1) {
++			//TODO: STA re_auth and auth timeout 
++		}
++	}
++
++	_enter_critical_bh(&pstapriv->auth_list_lock, &irqL);
++	if (rtw_is_list_empty(&pstat->auth_list))
++	{		
++		rtw_list_insert_tail(&pstat->auth_list, &pstapriv->auth_list);
++		pstapriv->auth_list_cnt++;
++	}	
++	_exit_critical_bh(&pstapriv->auth_list_lock, &irqL);
++
++	if (pstat->auth_seq == 0)
++		pstat->expire_to = pstapriv->auth_to;
++
++	if ((pstat->auth_seq + 1) != seq)
++	{
++		DBG_871X("(1)auth rejected because out of seq [rx_seq=%d, exp_seq=%d]!\n",
++			seq, pstat->auth_seq+1);
++		status = _STATS_OUT_OF_AUTH_SEQ_;
++		goto auth_fail;
++	}
++
++	if (algorithm==0 && (auth_mode == 0 || auth_mode == 2))
++	{
++		if (seq == 1)
++		{
++			pstat->state &= ~WIFI_FW_AUTH_NULL;
++			pstat->state |= WIFI_FW_AUTH_SUCCESS;
++			pstat->expire_to = pstapriv->assoc_to;
++			pstat->authalg = algorithm;
++		}
++		else
++		{
++			DBG_871X("(2)auth rejected because out of seq [rx_seq=%d, exp_seq=%d]!\n",
++				seq, pstat->auth_seq+1);
++			status = _STATS_OUT_OF_AUTH_SEQ_;
++			goto auth_fail;
++		}
++	}
++	else // shared system or auto authentication
++	{
++		if (seq == 1)
++		{
++			//prepare for the challenging txt...
++			
++			//get_random_bytes((void *)pstat->chg_txt, 128);//TODO:
++			
++			pstat->state &= ~WIFI_FW_AUTH_NULL;
++			pstat->state |= WIFI_FW_AUTH_STATE;
++			pstat->authalg = algorithm;
++			pstat->auth_seq = 2;
++		}
++		else if (seq == 3)
++		{
++			//checking for challenging txt...
++			DBG_871X("checking for challenging txt...\n");
++			
++			p = rtw_get_ie(pframe + WLAN_HDR_A3_LEN + 4 + _AUTH_IE_OFFSET_ , _CHLGETXT_IE_, (int *)&ie_len,
++					len - WLAN_HDR_A3_LEN - _AUTH_IE_OFFSET_ - 4);
++
++			if((p==NULL) || (ie_len<=0))
++			{
++				DBG_871X("auth rejected because challenge failure!(1)\n");
++				status = _STATS_CHALLENGE_FAIL_;
++				goto auth_fail;
++			}
++			
++			if (_rtw_memcmp((void *)(p + 2), pstat->chg_txt, 128))
++			{
++				pstat->state &= (~WIFI_FW_AUTH_STATE);
++				pstat->state |= WIFI_FW_AUTH_SUCCESS;
++				// challenging txt is correct...
++				pstat->expire_to =  pstapriv->assoc_to;
++			}
++			else
++			{
++				DBG_871X("auth rejected because challenge failure!\n");
++				status = _STATS_CHALLENGE_FAIL_;
++				goto auth_fail;
++			}
++		}
++		else
++		{
++			DBG_871X("(3)auth rejected because out of seq [rx_seq=%d, exp_seq=%d]!\n",
++				seq, pstat->auth_seq+1);
++			status = _STATS_OUT_OF_AUTH_SEQ_;
++			goto auth_fail;
++		}
++	}
++
++
++	// Now, we are going to issue_auth...
++	pstat->auth_seq = seq + 1;	
++	
++#ifdef CONFIG_NATIVEAP_MLME
++	issue_auth(padapter, pstat, (unsigned short)(_STATS_SUCCESSFUL_));
++#endif
++
++	if (pstat->state & WIFI_FW_AUTH_SUCCESS)
++		pstat->auth_seq = 0;
++
++		
++	return _SUCCESS;
++
++auth_fail:
++
++	if(pstat)
++		rtw_free_stainfo(padapter , pstat);
++	
++	pstat = &stat;
++	_rtw_memset((char *)pstat, '\0', sizeof(stat));
++	pstat->auth_seq = 2;
++	_rtw_memcpy(pstat->hwaddr, sa, 6);	
++	
++#ifdef CONFIG_NATIVEAP_MLME
++	issue_auth(padapter, pstat, (unsigned short)status);	
++#endif
++
++#endif
++	return _FAIL;
++
++}
++
++unsigned int OnAuthClient(_adapter *padapter, union recv_frame *precv_frame)
++{
++	unsigned int	seq, len, status, algthm, offset;
++	unsigned char	*p;
++	unsigned int	go2asoc = 0;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	u8 *pframe = precv_frame->u.hdr.rx_data;
++	uint pkt_len = precv_frame->u.hdr.len;
++
++	DBG_871X("%s\n", __FUNCTION__);
++
++	//check A1 matches or not
++	if (!_rtw_memcmp(myid(&(padapter->eeprompriv)), get_da(pframe), ETH_ALEN))
++		return _SUCCESS;
++
++	if (!(pmlmeinfo->state & WIFI_FW_AUTH_STATE))
++		return _SUCCESS;
++
++	offset = (GetPrivacy(pframe))? 4: 0;
++
++	algthm 	= le16_to_cpu(*(unsigned short *)((SIZE_PTR)pframe + WLAN_HDR_A3_LEN + offset));
++	seq 	= le16_to_cpu(*(unsigned short *)((SIZE_PTR)pframe + WLAN_HDR_A3_LEN + offset + 2));
++	status 	= le16_to_cpu(*(unsigned short *)((SIZE_PTR)pframe + WLAN_HDR_A3_LEN + offset + 4));
++
++	if (status != 0)
++	{
++		DBG_871X("clnt auth fail, status: %d\n", status);
++		if(status == 13)//&& pmlmeinfo->auth_algo == dot11AuthAlgrthm_Auto)
++		{
++			if(pmlmeinfo->auth_algo == dot11AuthAlgrthm_Shared)
++				pmlmeinfo->auth_algo = dot11AuthAlgrthm_Open;
++			else
++				pmlmeinfo->auth_algo = dot11AuthAlgrthm_Shared;
++			//pmlmeinfo->reauth_count = 0;
++		}
++		
++		set_link_timer(pmlmeext, 1);
++		goto authclnt_fail;
++	}
++
++	if (seq == 2)
++	{
++		if (pmlmeinfo->auth_algo == dot11AuthAlgrthm_Shared)
++		{
++			 // legendary shared system
++			p = rtw_get_ie(pframe + WLAN_HDR_A3_LEN + _AUTH_IE_OFFSET_, _CHLGETXT_IE_, (int *)&len,
++				pkt_len - WLAN_HDR_A3_LEN - _AUTH_IE_OFFSET_);
++
++			if (p == NULL)
++			{
++				//DBG_871X("marc: no challenge text?\n");
++				goto authclnt_fail;
++			}
++
++			_rtw_memcpy((void *)(pmlmeinfo->chg_txt), (void *)(p + 2), len);
++			pmlmeinfo->auth_seq = 3;
++			issue_auth(padapter, NULL, 0);
++			set_link_timer(pmlmeext, REAUTH_TO);
++
++			return _SUCCESS;
++		}
++		else
++		{
++			// open system
++			go2asoc = 1;
++		}
++	}
++	else if (seq == 4)
++	{
++		if (pmlmeinfo->auth_algo == dot11AuthAlgrthm_Shared)
++		{
++			go2asoc = 1;
++		}
++		else
++		{
++			goto authclnt_fail;
++		}
++	}
++	else
++	{
++		// this is also illegal
++		//DBG_871X("marc: clnt auth failed due to illegal seq=%x\n", seq);
++		goto authclnt_fail;
++	}
++
++	if (go2asoc)
++	{
++		start_clnt_assoc(padapter);
++		return _SUCCESS;
++	}
++
++authclnt_fail:
++
++	//pmlmeinfo->state &= ~(WIFI_FW_AUTH_STATE);
++
++	return _FAIL;
++
++}
++
++unsigned int OnAssocReq(_adapter *padapter, union recv_frame *precv_frame)
++{
++#ifdef CONFIG_AP_MODE
++	_irqL irqL;
++	u16 capab_info, listen_interval;
++	struct rtw_ieee802_11_elems elems;	
++	struct sta_info	*pstat;
++	unsigned char		reassoc, *p, *pos, *wpa_ie;
++	unsigned char WMM_IE[] = {0x00, 0x50, 0xf2, 0x02, 0x00, 0x01};
++	int		i, ie_len, wpa_ie_len, left;
++	unsigned char		supportRate[16];
++	int					supportRateNum;
++	unsigned short		status = _STATS_SUCCESSFUL_;
++	unsigned short		frame_type, ie_offset=0;	
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	struct security_priv *psecuritypriv = &padapter->securitypriv;
++	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);	
++	WLAN_BSSID_EX 	*cur = &(pmlmeinfo->network);
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	u8 *pframe = precv_frame->u.hdr.rx_data;
++	uint pkt_len = precv_frame->u.hdr.len;
++#ifdef CONFIG_P2P
++	struct wifidirect_info	*pwdinfo = &(padapter->wdinfo);
++	u8 p2p_status_code = P2P_STATUS_SUCCESS;
++	u8 *p2pie;
++	u32 p2pielen = 0;
++#ifdef CONFIG_WFD
++	u8	wfd_ie[ 128 ] = { 0x00 };
++	u32	wfd_ielen = 0;
++#endif // CONFIG_WFD
++#endif //CONFIG_P2P
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if(((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) &&
++		check_buddy_fwstate(padapter, _FW_UNDER_LINKING|_FW_UNDER_SURVEY))
++	{
++		//don't process assoc request;
++		return _SUCCESS;
++	}
++#endif //CONFIG_CONCURRENT_MODE
++
++	if((pmlmeinfo->state&0x03) != WIFI_FW_AP_STATE)
++		return _FAIL;
++	
++	frame_type = GetFrameSubType(pframe);
++	if (frame_type == WIFI_ASSOCREQ)
++	{
++		reassoc = 0;
++		ie_offset = _ASOCREQ_IE_OFFSET_;
++	}	
++	else // WIFI_REASSOCREQ
++	{
++		reassoc = 1;
++		ie_offset = _REASOCREQ_IE_OFFSET_;
++	}
++	
++
++	if (pkt_len < IEEE80211_3ADDR_LEN + ie_offset) {
++		DBG_871X("handle_assoc(reassoc=%d) - too short payload (len=%lu)"
++		       "\n", reassoc, (unsigned long)pkt_len);
++		return _FAIL;
++	}
++	
++	pstat = rtw_get_stainfo(pstapriv, GetAddr2Ptr(pframe));
++	if (pstat == (struct sta_info *)NULL)
++	{
++		status = _RSON_CLS2_;
++		goto asoc_class2_error;
++	}
++
++	capab_info = RTW_GET_LE16(pframe + WLAN_HDR_A3_LEN);
++	//capab_info = le16_to_cpu(*(unsigned short *)(pframe + WLAN_HDR_A3_LEN));	
++	//listen_interval = le16_to_cpu(*(unsigned short *)(pframe + WLAN_HDR_A3_LEN+2));
++	listen_interval = RTW_GET_LE16(pframe + WLAN_HDR_A3_LEN+2);
++
++	left = pkt_len - (IEEE80211_3ADDR_LEN + ie_offset);
++	pos = pframe + (IEEE80211_3ADDR_LEN + ie_offset);
++	
++
++	DBG_871X("%s\n", __FUNCTION__);
++
++	// check if this stat has been successfully authenticated/assocated
++	if (!((pstat->state) & WIFI_FW_AUTH_SUCCESS))
++	{
++		if (!((pstat->state) & WIFI_FW_ASSOC_SUCCESS))
++		{
++			status = _RSON_CLS2_;
++			goto asoc_class2_error;
++		}
++		else
++		{
++			pstat->state &= (~WIFI_FW_ASSOC_SUCCESS);
++			pstat->state |= WIFI_FW_ASSOC_STATE;				
++		}
++	}
++	else
++	{
++		pstat->state &= (~WIFI_FW_AUTH_SUCCESS);
++		pstat->state |= WIFI_FW_ASSOC_STATE;
++	}
++
++
++#if 0// todo:tkip_countermeasures
++	if (hapd->tkip_countermeasures) {
++		resp = WLAN_REASON_MICHAEL_MIC_FAILURE;
++		goto fail;
++	}
++#endif
++
++	pstat->capability = capab_info;
++
++#if 0//todo:
++	//check listen_interval
++	if (listen_interval > hapd->conf->max_listen_interval) {
++		hostapd_logger(hapd, mgmt->sa, HOSTAPD_MODULE_IEEE80211,
++			       HOSTAPD_LEVEL_DEBUG,
++			       "Too large Listen Interval (%d)",
++			       listen_interval);
++		resp = WLAN_STATUS_ASSOC_DENIED_LISTEN_INT_TOO_LARGE;
++		goto fail;
++	}
++	
++	pstat->listen_interval = listen_interval;
++#endif
++
++	//now parse all ieee802_11 ie to point to elems
++	if (rtw_ieee802_11_parse_elems(pos, left, &elems, 1) == ParseFailed ||
++	    !elems.ssid) {
++		DBG_871X("STA " MAC_FMT " sent invalid association request\n",
++		       MAC_ARG(pstat->hwaddr));
++		status = _STATS_FAILURE_;		
++		goto OnAssocReqFail;
++	}
++
++
++	// now we should check all the fields...
++	// checking SSID
++	p = rtw_get_ie(pframe + WLAN_HDR_A3_LEN + ie_offset, _SSID_IE_, &ie_len,
++		pkt_len - WLAN_HDR_A3_LEN - ie_offset);
++	if (p == NULL)
++	{
++		status = _STATS_FAILURE_;		
++	}
++
++	if (ie_len == 0) // broadcast ssid, however it is not allowed in assocreq
++		status = _STATS_FAILURE_;
++	else
++	{
++		// check if ssid match
++		if (!_rtw_memcmp((void *)(p+2), cur->Ssid.Ssid, cur->Ssid.SsidLength))
++			status = _STATS_FAILURE_;
++
++		if (ie_len != cur->Ssid.SsidLength)
++			status = _STATS_FAILURE_;
++	}
++
++	if(_STATS_SUCCESSFUL_ != status)
++		goto OnAssocReqFail;
++
++	// check if the supported rate is ok
++	p = rtw_get_ie(pframe + WLAN_HDR_A3_LEN + ie_offset, _SUPPORTEDRATES_IE_, &ie_len, pkt_len - WLAN_HDR_A3_LEN - ie_offset);
++	if (p == NULL) {
++		DBG_871X("Rx a sta assoc-req which supported rate is empty!\n");
++		// use our own rate set as statoin used
++		//_rtw_memcpy(supportRate, AP_BSSRATE, AP_BSSRATE_LEN);
++		//supportRateNum = AP_BSSRATE_LEN;
++		
++		status = _STATS_FAILURE_;
++		goto OnAssocReqFail;
++	}
++	else {
++		_rtw_memcpy(supportRate, p+2, ie_len);
++		supportRateNum = ie_len;
++
++		p = rtw_get_ie(pframe + WLAN_HDR_A3_LEN + ie_offset, _EXT_SUPPORTEDRATES_IE_ , &ie_len,
++				pkt_len - WLAN_HDR_A3_LEN - ie_offset);
++		if (p !=  NULL) {
++			
++			if(supportRateNum<=sizeof(supportRate))
++			{
++				_rtw_memcpy(supportRate+supportRateNum, p+2, ie_len);
++				supportRateNum += ie_len;
++			}			
++		}
++	}
++
++	//todo: mask supportRate between AP & STA -> move to update raid
++	//get_matched_rate(pmlmeext, supportRate, &supportRateNum, 0);
++
++	//update station supportRate	
++	pstat->bssratelen = supportRateNum;
++	_rtw_memcpy(pstat->bssrateset, supportRate, supportRateNum);
++
++
++	//check RSN/WPA/WPS
++	pstat->dot8021xalg = 0;
++      	pstat->wpa_psk = 0;
++	pstat->wpa_group_cipher = 0;
++	pstat->wpa2_group_cipher = 0;
++	pstat->wpa_pairwise_cipher = 0;
++	pstat->wpa2_pairwise_cipher = 0;
++	_rtw_memset(pstat->wpa_ie, 0, sizeof(pstat->wpa_ie));
++	if((psecuritypriv->wpa_psk & BIT(1)) && elems.rsn_ie) {
++
++		int group_cipher=0, pairwise_cipher=0;	
++		
++		wpa_ie = elems.rsn_ie;
++		wpa_ie_len = elems.rsn_ie_len;
++
++		if(rtw_parse_wpa2_ie(wpa_ie-2, wpa_ie_len+2, &group_cipher, &pairwise_cipher) == _SUCCESS)
++		{
++			pstat->dot8021xalg = 1;//psk,  todo:802.1x						
++			pstat->wpa_psk |= BIT(1);
++
++			pstat->wpa2_group_cipher = group_cipher&psecuritypriv->wpa2_group_cipher;				
++			pstat->wpa2_pairwise_cipher = pairwise_cipher&psecuritypriv->wpa2_pairwise_cipher;
++			
++			if(!pstat->wpa2_group_cipher)
++				status = WLAN_STATUS_GROUP_CIPHER_NOT_VALID;
++
++			if(!pstat->wpa2_pairwise_cipher)
++				status = WLAN_STATUS_PAIRWISE_CIPHER_NOT_VALID;
++		}
++		else
++		{
++			status = WLAN_STATUS_INVALID_IE;
++		}	
++			
++	} else if ((psecuritypriv->wpa_psk & BIT(0)) && elems.wpa_ie) {
++
++		int group_cipher=0, pairwise_cipher=0;	
++		
++		wpa_ie = elems.wpa_ie;
++		wpa_ie_len = elems.wpa_ie_len;
++
++		if(rtw_parse_wpa_ie(wpa_ie-2, wpa_ie_len+2, &group_cipher, &pairwise_cipher) == _SUCCESS)
++		{
++			pstat->dot8021xalg = 1;//psk,  todo:802.1x						
++			pstat->wpa_psk |= BIT(0);
++
++			pstat->wpa_group_cipher = group_cipher&psecuritypriv->wpa_group_cipher;				
++			pstat->wpa_pairwise_cipher = pairwise_cipher&psecuritypriv->wpa_pairwise_cipher;
++			
++			if(!pstat->wpa_group_cipher)
++				status = WLAN_STATUS_GROUP_CIPHER_NOT_VALID;
++
++			if(!pstat->wpa_pairwise_cipher)
++				status = WLAN_STATUS_PAIRWISE_CIPHER_NOT_VALID;
++		
++		}
++		else
++		{
++			status = WLAN_STATUS_INVALID_IE;
++		}
++		
++	} else {
++		wpa_ie = NULL;
++		wpa_ie_len = 0;
++	}
++
++	if(_STATS_SUCCESSFUL_ != status)
++		goto OnAssocReqFail;
++
++	pstat->flags &= ~(WLAN_STA_WPS | WLAN_STA_MAYBE_WPS);
++	//if (hapd->conf->wps_state && wpa_ie == NULL) { //todo: to check ap if supporting WPS
++	if(wpa_ie == NULL) {
++		if (elems.wps_ie) {
++			DBG_871X("STA included WPS IE in "
++				   "(Re)Association Request - assume WPS is "
++				   "used\n");
++			pstat->flags |= WLAN_STA_WPS;
++			//wpabuf_free(sta->wps_ie);
++			//sta->wps_ie = wpabuf_alloc_copy(elems.wps_ie + 4,
++			//				elems.wps_ie_len - 4);
++		} else {
++			DBG_871X("STA did not include WPA/RSN IE "
++				   "in (Re)Association Request - possible WPS "
++				   "use\n");
++			pstat->flags |= WLAN_STA_MAYBE_WPS;
++		}
++
++
++		// AP support WPA/RSN, and sta is going to do WPS, but AP is not ready
++		// that the selected registrar of AP is _FLASE
++		if((psecuritypriv->wpa_psk >0)  
++			&& (pstat->flags & (WLAN_STA_WPS|WLAN_STA_MAYBE_WPS)))
++		{
++			if(pmlmepriv->wps_beacon_ie)
++			{	
++				u8 selected_registrar = 0;
++				
++				rtw_get_wps_attr_content(pmlmepriv->wps_beacon_ie, pmlmepriv->wps_beacon_ie_len, WPS_ATTR_SELECTED_REGISTRAR , &selected_registrar, NULL);
++
++				if(!selected_registrar)
++				{						
++					DBG_871X("selected_registrar is _FALSE , or AP is not ready to do WPS\n");
++						
++					status = _STATS_UNABLE_HANDLE_STA_;
++			
++					goto OnAssocReqFail;
++				}						
++			}			
++		}
++			
++	}
++	else
++	{
++		int copy_len;
++
++		if(psecuritypriv->wpa_psk == 0)
++		{
++			DBG_871X("STA " MAC_FMT ": WPA/RSN IE in association "
++		       	"request, but AP don't support WPA/RSN\n", MAC_ARG(pstat->hwaddr));
++			
++			status = WLAN_STATUS_INVALID_IE;
++			
++			goto OnAssocReqFail;
++
++		}
++
++		if (elems.wps_ie) {
++			DBG_871X("STA included WPS IE in "
++				   "(Re)Association Request - WPS is "
++				   "used\n");
++			pstat->flags |= WLAN_STA_WPS;
++			copy_len=0;
++		}
++		else
++		{
++			copy_len = ((wpa_ie_len+2) > sizeof(pstat->wpa_ie)) ? (sizeof(pstat->wpa_ie)):(wpa_ie_len+2);
++		}
++
++		
++		if(copy_len>0)
++			_rtw_memcpy(pstat->wpa_ie, wpa_ie-2, copy_len);
++		
++	}
++
++
++	// check if there is WMM IE & support WWM-PS
++	pstat->flags &= ~WLAN_STA_WME;
++	pstat->qos_option = 0;
++	pstat->qos_info = 0;
++	pstat->has_legacy_ac = _TRUE;
++	pstat->uapsd_vo = 0;
++	pstat->uapsd_vi = 0;
++	pstat->uapsd_be = 0;
++	pstat->uapsd_bk = 0;
++	if (pmlmepriv->qospriv.qos_option) 
++	{
++		p = pframe + WLAN_HDR_A3_LEN + ie_offset; ie_len = 0;
++		for (;;) 
++		{
++			p = rtw_get_ie(p, _VENDOR_SPECIFIC_IE_, &ie_len, pkt_len - WLAN_HDR_A3_LEN - ie_offset);
++			if (p != NULL) {
++				if (_rtw_memcmp(p+2, WMM_IE, 6)) {
++
++					pstat->flags |= WLAN_STA_WME;
++					
++					pstat->qos_option = 1;				
++					pstat->qos_info = *(p+8);
++					
++					pstat->max_sp_len = (pstat->qos_info>>5)&0x3;
++
++					if((pstat->qos_info&0xf) !=0xf)
++						pstat->has_legacy_ac = _TRUE;
++					else
++						pstat->has_legacy_ac = _FALSE;
++					
++					if(pstat->qos_info&0xf)
++					{
++						if(pstat->qos_info&BIT(0))
++							pstat->uapsd_vo = BIT(0)|BIT(1);
++						else
++							pstat->uapsd_vo = 0;
++		
++						if(pstat->qos_info&BIT(1))
++							pstat->uapsd_vi = BIT(0)|BIT(1);
++						else
++							pstat->uapsd_vi = 0;
++			
++						if(pstat->qos_info&BIT(2))
++							pstat->uapsd_bk = BIT(0)|BIT(1);
++						else
++							pstat->uapsd_bk = 0;
++			
++						if(pstat->qos_info&BIT(3))			
++							pstat->uapsd_be = BIT(0)|BIT(1);
++						else
++							pstat->uapsd_be = 0;
++		
++					}
++	
++					break;
++				}
++			}
++			else {
++				break;
++			}
++			p = p + ie_len + 2;
++		}
++	}
++
++
++#ifdef CONFIG_80211N_HT
++	/* save HT capabilities in the sta object */
++	_rtw_memset(&pstat->htpriv.ht_cap, 0, sizeof(struct rtw_ieee80211_ht_cap));
++	if (elems.ht_capabilities && elems.ht_capabilities_len >= sizeof(struct rtw_ieee80211_ht_cap)) 
++	{
++		pstat->flags |= WLAN_STA_HT;
++		
++		pstat->flags |= WLAN_STA_WME;
++		
++		_rtw_memcpy(&pstat->htpriv.ht_cap, elems.ht_capabilities, sizeof(struct rtw_ieee80211_ht_cap));			
++		
++	} else
++		pstat->flags &= ~WLAN_STA_HT;
++
++	
++	if((pmlmepriv->htpriv.ht_option == _FALSE) && (pstat->flags&WLAN_STA_HT))
++	{
++		status = _STATS_FAILURE_;
++		goto OnAssocReqFail;
++	}
++		
++
++	if ((pstat->flags & WLAN_STA_HT) &&
++		    ((pstat->wpa2_pairwise_cipher&WPA_CIPHER_TKIP) ||
++		      (pstat->wpa_pairwise_cipher&WPA_CIPHER_TKIP)))
++	{		    
++		DBG_871X("HT: " MAC_FMT " tried to "
++				   "use TKIP with HT association\n", MAC_ARG(pstat->hwaddr));
++		
++		//status = WLAN_STATUS_CIPHER_REJECTED_PER_POLICY;
++		//goto OnAssocReqFail;
++	}
++#endif /* CONFIG_80211N_HT */
++
++       //
++       //if (hapd->iface->current_mode->mode == HOSTAPD_MODE_IEEE80211G)//?
++	pstat->flags |= WLAN_STA_NONERP;	
++	for (i = 0; i < pstat->bssratelen; i++) {
++		if ((pstat->bssrateset[i] & 0x7f) > 22) {
++			pstat->flags &= ~WLAN_STA_NONERP;
++			break;
++		}
++	}
++
++	if (pstat->capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
++		pstat->flags |= WLAN_STA_SHORT_PREAMBLE;
++	else
++		pstat->flags &= ~WLAN_STA_SHORT_PREAMBLE;
++
++	
++	
++	if (status != _STATS_SUCCESSFUL_)
++		goto OnAssocReqFail;
++
++#ifdef CONFIG_P2P
++	pstat->is_p2p_device = _FALSE;
++	if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO))
++	{		
++		if( (p2pie=rtw_get_p2p_ie(pframe + WLAN_HDR_A3_LEN + ie_offset , pkt_len - WLAN_HDR_A3_LEN - ie_offset , NULL, &p2pielen)))
++		{
++			pstat->is_p2p_device = _TRUE;
++			if((p2p_status_code=(u8)process_assoc_req_p2p_ie(pwdinfo, pframe, pkt_len, pstat))>0)
++			{
++				pstat->p2p_status_code = p2p_status_code;
++				status = _STATS_CAP_FAIL_;
++				goto OnAssocReqFail;
++			}
++		}
++#ifdef CONFIG_WFD
++		if(rtw_get_wfd_ie(pframe + WLAN_HDR_A3_LEN + ie_offset , pkt_len - WLAN_HDR_A3_LEN - ie_offset , wfd_ie, &wfd_ielen ))
++		{
++			u8	attr_content[ 10 ] = { 0x00 };
++			u32	attr_contentlen = 0;
++
++			DBG_8192C( "[%s] WFD IE Found!!\n", __FUNCTION__ );
++			rtw_get_wfd_attr_content( wfd_ie, wfd_ielen, WFD_ATTR_DEVICE_INFO, attr_content, &attr_contentlen);
++			if ( attr_contentlen )
++			{
++				pwdinfo->wfd_info->peer_rtsp_ctrlport = RTW_GET_BE16( attr_content + 2 );
++				DBG_8192C( "[%s] Peer PORT NUM = %d\n", __FUNCTION__, pwdinfo->wfd_info->peer_rtsp_ctrlport );
++			}
++		}
++#endif
++	}
++	pstat->p2p_status_code = p2p_status_code;
++#endif //CONFIG_P2P
++
++	//TODO: identify_proprietary_vendor_ie();
++	// Realtek proprietary IE
++	// identify if this is Broadcom sta
++	// identify if this is ralink sta
++	// Customer proprietary IE
++
++	
++
++	/* get a unique AID */
++	if (pstat->aid > 0) {
++		DBG_871X("  old AID %d\n", pstat->aid);
++	} else {
++		for (pstat->aid = 1; pstat->aid <= NUM_STA; pstat->aid++)
++			if (pstapriv->sta_aid[pstat->aid - 1] == NULL)
++				break;
++				
++		//if (pstat->aid > NUM_STA) {
++		if (pstat->aid > pstapriv->max_num_sta) {
++				
++			pstat->aid = 0;
++				
++			DBG_871X("  no room for more AIDs\n");
++
++			status = WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA;
++				
++			goto OnAssocReqFail;
++				
++			
++		} else {
++			pstapriv->sta_aid[pstat->aid - 1] = pstat;
++			DBG_871X("allocate new AID = (%d)\n", pstat->aid);
++		}	
++	}
++
++
++	pstat->state &= (~WIFI_FW_ASSOC_STATE);	
++	pstat->state |= WIFI_FW_ASSOC_SUCCESS;
++	
++	_enter_critical_bh(&pstapriv->auth_list_lock, &irqL);
++	if (!rtw_is_list_empty(&pstat->auth_list))
++	{
++		rtw_list_delete(&pstat->auth_list);
++		pstapriv->auth_list_cnt--;
++	}
++	_exit_critical_bh(&pstapriv->auth_list_lock, &irqL);
++
++	_enter_critical_bh(&pstapriv->asoc_list_lock, &irqL);	
++	if (rtw_is_list_empty(&pstat->asoc_list))
++	{
++		pstat->expire_to = pstapriv->expire_to;
++		rtw_list_insert_tail(&pstat->asoc_list, &pstapriv->asoc_list);
++		pstapriv->asoc_list_cnt++;
++	}
++	_exit_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++
++	// now the station is qualified to join our BSS...	
++	if(pstat && (pstat->state & WIFI_FW_ASSOC_SUCCESS) && (_STATS_SUCCESSFUL_==status))
++	{
++#ifdef CONFIG_NATIVEAP_MLME
++		//.1 bss_cap_update & sta_info_update
++		bss_cap_update_on_sta_join(padapter, pstat);
++		sta_info_update(padapter, pstat);
++
++		//issue assoc rsp before notify station join event.
++		if (frame_type == WIFI_ASSOCREQ)
++			issue_asocrsp(padapter, status, pstat, WIFI_ASSOCRSP);
++		else
++			issue_asocrsp(padapter, status, pstat, WIFI_REASSOCRSP);
++
++		//.2 - report to upper layer 
++		DBG_871X("indicate_sta_join_event to upper layer - hostapd\n");
++
++#ifdef CONFIG_IOCTL_CFG80211
++		#ifdef COMPAT_KERNEL_RELEASE
++		rtw_cfg80211_indicate_sta_assoc(padapter, pframe, pkt_len);
++		#elif (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) && !defined(CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER)
++		rtw_cfg80211_indicate_sta_assoc(padapter, pframe, pkt_len);
++		#else //(LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) && !defined(CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER)
++		_enter_critical_bh(&pstat->lock, &irqL);
++		if(pstat->passoc_req)
++		{
++			rtw_mfree(pstat->passoc_req, pstat->assoc_req_len);
++			pstat->passoc_req = NULL;
++			pstat->assoc_req_len = 0;
++		}
++
++		pstat->passoc_req =  rtw_zmalloc(pkt_len);
++		if(pstat->passoc_req)
++		{
++			_rtw_memcpy(pstat->passoc_req, pframe, pkt_len);
++			pstat->assoc_req_len = pkt_len;
++		}
++		_exit_critical_bh(&pstat->lock, &irqL);		
++		#endif //(LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) && !defined(CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER)
++#else
++		rtw_indicate_sta_assoc_event(padapter, pstat);
++#endif //CONFIG_IOCTL_CFG80211
++
++		//.3-(1) report sta add event
++		report_add_sta_event(padapter, pstat->hwaddr, pstat->aid);
++		
++/*		
++		//issue assoc rsp before notify station join event.
++		if (frame_type == WIFI_ASSOCREQ)
++			issue_asocrsp(padapter, status, pstat, WIFI_ASSOCRSP);
++		else
++			issue_asocrsp(padapter, status, pstat, WIFI_REASSOCRSP);
++*/			
++	
++#endif
++	}
++
++	return _SUCCESS;
++
++asoc_class2_error:
++
++#ifdef CONFIG_NATIVEAP_MLME
++	issue_deauth(padapter, (void *)GetAddr2Ptr(pframe), status);
++#endif
++
++	return _FAIL;		
++
++OnAssocReqFail:
++
++
++#ifdef CONFIG_NATIVEAP_MLME
++	pstat->aid = 0;
++	if (frame_type == WIFI_ASSOCREQ)
++		issue_asocrsp(padapter, status, pstat, WIFI_ASSOCRSP);
++	else
++		issue_asocrsp(padapter, status, pstat, WIFI_REASSOCRSP);
++#endif
++
++
++#endif /* CONFIG_AP_MODE */
++
++	return _FAIL;		
++
++}
++
++unsigned int OnAssocRsp(_adapter *padapter, union recv_frame *precv_frame)
++{
++	uint i;
++	int res;
++	unsigned short	status;
++	PNDIS_802_11_VARIABLE_IEs	pIE;
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	//WLAN_BSSID_EX 		*cur_network = &(pmlmeinfo->network);
++	u8 *pframe = precv_frame->u.hdr.rx_data;
++	uint pkt_len = precv_frame->u.hdr.len;
++
++	DBG_871X("%s\n", __FUNCTION__);
++	
++	//check A1 matches or not
++	if (!_rtw_memcmp(myid(&(padapter->eeprompriv)), get_da(pframe), ETH_ALEN))
++		return _SUCCESS;
++
++	if (!(pmlmeinfo->state & (WIFI_FW_AUTH_SUCCESS | WIFI_FW_ASSOC_STATE)))
++		return _SUCCESS;
++
++	if (pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS)
++		return _SUCCESS;
++
++	_cancel_timer_ex(&pmlmeext->link_timer);
++
++	//status
++	if ((status = le16_to_cpu(*(unsigned short *)(pframe + WLAN_HDR_A3_LEN + 2))) > 0)
++	{
++		DBG_871X("assoc reject, status code: %d\n", status);
++		pmlmeinfo->state = WIFI_FW_NULL_STATE;
++		res = -4;
++		goto report_assoc_result;
++	}
++
++	//get capabilities
++	pmlmeinfo->capability = le16_to_cpu(*(unsigned short *)(pframe + WLAN_HDR_A3_LEN));
++
++	//set slot time
++	pmlmeinfo->slotTime = (pmlmeinfo->capability & BIT(10))? 9: 20;
++
++	//AID
++	res = pmlmeinfo->aid = (int)(le16_to_cpu(*(unsigned short *)(pframe + WLAN_HDR_A3_LEN + 4))&0x3fff);
++
++	//following are moved to join event callback function
++	//to handle HT, WMM, rate adaptive, update MAC reg
++	//for not to handle the synchronous IO in the tasklet
++	for (i = (6 + WLAN_HDR_A3_LEN); i < pkt_len;)
++	{
++		pIE = (PNDIS_802_11_VARIABLE_IEs)(pframe + i);
++
++		switch (pIE->ElementID)
++		{
++			case _VENDOR_SPECIFIC_IE_:
++				if (_rtw_memcmp(pIE->data, WMM_PARA_OUI, 6))	//WMM
++				{
++					WMM_param_handler(padapter, pIE);
++				}
++#if defined(CONFIG_P2P) && defined(CONFIG_WFD)
++				else if ( _rtw_memcmp(pIE->data, WFD_OUI, 4))		//WFD
++				{
++					DBG_871X( "[%s] Found WFD IE\n", __FUNCTION__ );
++					WFD_info_handler( padapter, pIE );
++				}
++#endif				
++				break;
++
++			case _HT_CAPABILITY_IE_:	//HT caps
++				HT_caps_handler(padapter, pIE);
++				break;
++
++			case _HT_EXTRA_INFO_IE_:	//HT info
++				HT_info_handler(padapter, pIE);
++				break;
++
++			case _ERPINFO_IE_:
++				ERP_IE_handler(padapter, pIE);
++
++			default:
++				break;
++		}
++
++		i += (pIE->Length + 2);
++	}
++
++	pmlmeinfo->state &= (~WIFI_FW_ASSOC_STATE);
++	pmlmeinfo->state |= WIFI_FW_ASSOC_SUCCESS;
++
++	//Update Basic Rate Table for spec, 2010-12-28 , by thomas
++	UpdateBrateTbl(padapter, pmlmeinfo->network.SupportedRates);
++
++#ifdef CONFIG_IOCTL_CFG80211
++	if (!rtw_cfg80211_check_bss(padapter)) {
++		DBG_871X("rtw_cfg80211_check_bss() : BSS not found !!\n");
++		res = -2;
++		goto report_assoc_result;
++	}
++#endif
++
++report_assoc_result:
++	if (res > 0) {
++		rtw_buf_update(&pmlmepriv->assoc_rsp, &pmlmepriv->assoc_rsp_len, pframe, pkt_len);
++	} else {
++		rtw_buf_free(&pmlmepriv->assoc_rsp, &pmlmepriv->assoc_rsp_len);
++	}
++
++	report_join_res(padapter, res);
++	return _SUCCESS;
++}
++
++unsigned int OnDeAuth(_adapter *padapter, union recv_frame *precv_frame)
++{
++	unsigned short	reason;
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	u8 *pframe = precv_frame->u.hdr.rx_data;
++#ifdef CONFIG_P2P
++	struct wifidirect_info *pwdinfo= &(padapter->wdinfo);
++#endif //CONFIG_P2P
++
++	//check A3
++	if (!(_rtw_memcmp(GetAddr3Ptr(pframe), get_my_bssid(&pmlmeinfo->network), ETH_ALEN)))
++		return _SUCCESS;
++
++#ifdef CONFIG_P2P
++	if ( pwdinfo->rx_invitereq_info.scan_op_ch_only )
++	{
++		_cancel_timer_ex( &pwdinfo->reset_ch_sitesurvey );
++		_set_timer( &pwdinfo->reset_ch_sitesurvey, 10 );
++	}
++#endif //CONFIG_P2P
++
++	reason = le16_to_cpu(*(unsigned short *)(pframe + WLAN_HDR_A3_LEN));
++
++	DBG_871X("%s Reason code(%d)\n", __FUNCTION__,reason);
++
++#ifdef CONFIG_AP_MODE
++	if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE)
++	{		
++		_irqL irqL;
++		struct sta_info *psta;
++		struct sta_priv *pstapriv = &padapter->stapriv;
++		
++		//_enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL);		
++		//rtw_free_stainfo(padapter, psta);
++		//_exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL);		
++
++		DBG_871X("%s, STA:" MAC_FMT "\n", __FUNCTION__, MAC_ARG(GetAddr2Ptr(pframe)));
++
++		psta = rtw_get_stainfo(pstapriv, GetAddr2Ptr(pframe));	
++		if(psta)
++		{
++			u8 updated;
++		
++			_enter_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++			if(rtw_is_list_empty(&psta->asoc_list)==_FALSE)
++			{			
++				rtw_list_delete(&psta->asoc_list);
++				pstapriv->asoc_list_cnt--;
++				updated = ap_free_sta(padapter, psta, _FALSE, reason);
++
++			}
++			_exit_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++
++			associated_clients_update(padapter, updated);
++		}
++		
++
++		return _SUCCESS;
++	}
++	else
++#endif
++	{
++		int	ignore_received_deauth = 0;
++
++		//	Commented by Albert 20130604
++		//	Before sending the auth frame to start the STA/GC mode connection with AP/GO, 
++		//	we will send the deauth first.
++		//	However, the Win8.1 with BRCM Wi-Fi will send the deauth with reason code 6 to us after receieving our deauth.
++		//	Added the following code to avoid this case.
++		if ( ( pmlmeinfo->state & WIFI_FW_AUTH_STATE ) ||
++			( pmlmeinfo->state & WIFI_FW_ASSOC_STATE ) )
++		{
++			if ( reason == WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA )
++			{
++				ignore_received_deauth = 1;
++			} else if (WLAN_REASON_PREV_AUTH_NOT_VALID == reason) {
++				// TODO: 802.11r
++				ignore_received_deauth = 1;
++			}
++		}
++
++		DBG_871X("%s, STA:" MAC_FMT ", ignore = %d\n", __FUNCTION__, MAC_ARG(GetAddr3Ptr(pframe)), ignore_received_deauth);
++		if ( 0 == ignore_received_deauth )
++		{
++			receive_disconnect(padapter, GetAddr3Ptr(pframe) ,reason);
++		}
++	}	
++	pmlmepriv->LinkDetectInfo.bBusyTraffic = _FALSE;
++	return _SUCCESS;
++
++}
++
++unsigned int OnDisassoc(_adapter *padapter, union recv_frame *precv_frame)
++{
++	unsigned short	reason;
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	u8 *pframe = precv_frame->u.hdr.rx_data;
++#ifdef CONFIG_P2P
++	struct wifidirect_info *pwdinfo= &(padapter->wdinfo);
++#endif //CONFIG_P2P
++
++	//check A3
++	if (!(_rtw_memcmp(GetAddr3Ptr(pframe), get_my_bssid(&pmlmeinfo->network), ETH_ALEN)))
++		return _SUCCESS;
++
++#ifdef CONFIG_P2P
++	if ( pwdinfo->rx_invitereq_info.scan_op_ch_only )
++	{
++		_cancel_timer_ex( &pwdinfo->reset_ch_sitesurvey );
++		_set_timer( &pwdinfo->reset_ch_sitesurvey, 10 );
++	}
++#endif //CONFIG_P2P
++
++	reason = le16_to_cpu(*(unsigned short *)(pframe + WLAN_HDR_A3_LEN));
++
++        DBG_871X("%s Reason code(%d)\n", __FUNCTION__,reason);
++
++#ifdef CONFIG_AP_MODE
++	if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE)
++	{	
++		_irqL irqL;
++		struct sta_info *psta;
++		struct sta_priv *pstapriv = &padapter->stapriv;
++		
++		//_enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL);	
++		//rtw_free_stainfo(padapter, psta);
++		//_exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL);		
++
++		DBG_871X("%s, STA:" MAC_FMT "\n", __FUNCTION__, MAC_ARG(GetAddr2Ptr(pframe)));
++
++		psta = rtw_get_stainfo(pstapriv, GetAddr2Ptr(pframe));	
++		if(psta)
++		{
++			u8 updated;
++			
++			_enter_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++			if(rtw_is_list_empty(&psta->asoc_list)==_FALSE)
++			{
++				rtw_list_delete(&psta->asoc_list);
++				pstapriv->asoc_list_cnt--;
++				updated = ap_free_sta(padapter, psta, _FALSE, reason);
++			
++			}
++			_exit_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++
++			associated_clients_update(padapter, updated);
++		}
++
++		return _SUCCESS;
++	}
++	else
++#endif
++	{
++		DBG_871X("%s, STA:" MAC_FMT "\n", __FUNCTION__, MAC_ARG(GetAddr3Ptr(pframe)));
++		
++		receive_disconnect(padapter, GetAddr3Ptr(pframe), reason);
++	}	
++	pmlmepriv->LinkDetectInfo.bBusyTraffic = _FALSE;
++	return _SUCCESS;
++
++}
++
++unsigned int OnAtim(_adapter *padapter, union recv_frame *precv_frame)
++{
++	DBG_871X("%s\n", __FUNCTION__);
++	return _SUCCESS;
++}
++
++unsigned int on_action_spct_ch_switch(_adapter *padapter, struct sta_info *psta, u8 *ies, uint ies_len)
++{
++	unsigned int ret = _FAIL;
++	struct mlme_ext_priv *mlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(mlmeext->mlmext_info);
++
++	if (!(pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS)) {
++		ret = _SUCCESS;	
++		goto exit;
++	}
++
++	if ((pmlmeinfo->state & 0x03) == WIFI_FW_STATION_STATE) {
++		
++		int ch_switch_mode = -1, ch = -1, ch_switch_cnt = -1;
++		int ch_offset = -1;
++		u8 bwmode;
++		struct ieee80211_info_element *ie;
++
++		DBG_871X(FUNC_NDEV_FMT" from "MAC_FMT"\n",
++			FUNC_NDEV_ARG(padapter->pnetdev), MAC_ARG(psta->hwaddr));
++
++		for_each_ie(ie, ies, ies_len) {
++			if (ie->id == WLAN_EID_CHANNEL_SWITCH) {
++				ch_switch_mode = ie->data[0];
++				ch = ie->data[1];
++				ch_switch_cnt = ie->data[2];
++				DBG_871X("ch_switch_mode:%d, ch:%d, ch_switch_cnt:%d\n",
++					ch_switch_mode, ch, ch_switch_cnt);
++			}
++			else if (ie->id == WLAN_EID_SECONDARY_CHANNEL_OFFSET) {
++				ch_offset = secondary_ch_offset_to_hal_ch_offset(ie->data[0]);
++				DBG_871X("ch_offset:%d\n", ch_offset);
++			}
++		}
++
++		if (ch == -1)
++			return _SUCCESS;
++
++		if (ch_offset == -1)
++			bwmode = mlmeext->cur_bwmode;
++		else
++			bwmode = (ch_offset == HAL_PRIME_CHNL_OFFSET_DONT_CARE) ?
++				HT_CHANNEL_WIDTH_20 : HT_CHANNEL_WIDTH_40;
++
++		ch_offset = (ch_offset == -1) ? mlmeext->cur_ch_offset : ch_offset;
++
++		/* todo:
++		 * 1. the decision of channel switching
++		 * 2. things after channel switching
++		 */
++
++		ret = rtw_set_ch_cmd(padapter, ch, bwmode, ch_offset, _TRUE);
++	}
++
++exit:
++	return ret;
++}
++
++unsigned int on_action_spct(_adapter *padapter, union recv_frame *precv_frame)
++{
++	unsigned int ret = _FAIL;
++	struct sta_info *psta = NULL;
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	u8 *pframe = precv_frame->u.hdr.rx_data;
++	uint frame_len = precv_frame->u.hdr.len;
++	u8 *frame_body = (u8 *)(pframe + sizeof(struct rtw_ieee80211_hdr_3addr));
++	u8 category;
++	u8 action;
++
++	DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(padapter->pnetdev));
++
++	psta = rtw_get_stainfo(pstapriv, GetAddr2Ptr(pframe));
++
++	if (!psta)
++		goto exit;
++
++	category = frame_body[0];
++	if(category != RTW_WLAN_CATEGORY_SPECTRUM_MGMT)
++		goto exit;
++
++	action = frame_body[1];
++	switch (action) {
++	case RTW_WLAN_ACTION_SPCT_MSR_REQ:
++	case RTW_WLAN_ACTION_SPCT_MSR_RPRT:
++	case RTW_WLAN_ACTION_SPCT_TPC_REQ:
++	case RTW_WLAN_ACTION_SPCT_TPC_RPRT:
++		break;
++	case RTW_WLAN_ACTION_SPCT_CHL_SWITCH:
++		#ifdef CONFIG_SPCT_CH_SWITCH
++		ret = on_action_spct_ch_switch(padapter, psta, &frame_body[2],
++			frame_len-(frame_body-pframe)-2);
++		#endif
++		break;
++	default:
++		break;
++	}
++
++exit:
++	return ret;
++}
++
++unsigned int OnAction_qos(_adapter *padapter, union recv_frame *precv_frame)
++{
++	return _SUCCESS;
++}
++
++unsigned int OnAction_dls(_adapter *padapter, union recv_frame *precv_frame)
++{
++	return _SUCCESS;
++}
++
++unsigned int OnAction_back(_adapter *padapter, union recv_frame *precv_frame)
++{
++	u8 *addr;
++	struct sta_info *psta=NULL;
++	struct recv_reorder_ctrl *preorder_ctrl;
++	unsigned char		*frame_body;
++	unsigned char		category, action;
++	unsigned short	tid, status, reason_code = 0;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	u8 *pframe = precv_frame->u.hdr.rx_data;
++	struct sta_priv *pstapriv = &padapter->stapriv;
++
++	//check RA matches or not	
++	if (!_rtw_memcmp(myid(&(padapter->eeprompriv)), GetAddr1Ptr(pframe), ETH_ALEN))//for if1, sta/ap mode
++		return _SUCCESS;
++
++/*
++	//check A1 matches or not
++	if (!_rtw_memcmp(myid(&(padapter->eeprompriv)), get_da(pframe), ETH_ALEN))
++		return _SUCCESS;
++*/
++	DBG_871X("%s\n", __FUNCTION__);
++
++	if((pmlmeinfo->state&0x03) != WIFI_FW_AP_STATE)	
++		if (!(pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS))
++			return _SUCCESS;
++
++	addr = GetAddr2Ptr(pframe);
++	psta = rtw_get_stainfo(pstapriv, addr);
++
++	if(psta==NULL)
++		return _SUCCESS;
++
++	frame_body = (unsigned char *)(pframe + sizeof(struct rtw_ieee80211_hdr_3addr));
++
++	category = frame_body[0];
++	if (category == RTW_WLAN_CATEGORY_BACK)// representing Block Ack
++	{
++#ifdef CONFIG_TDLS
++		if((psta->tdls_sta_state & TDLS_LINKED_STATE) && 
++			(psta->htpriv.ht_option==_TRUE) &&
++			(psta->htpriv.ampdu_enable==_TRUE) )
++		{
++			//do nothing; just don't want to return _SUCCESS;
++		}
++		else
++#endif //CONFIG_TDLS
++		if (!pmlmeinfo->HT_enable)
++		{
++			return _SUCCESS;
++		}
++
++		action = frame_body[1];
++		DBG_871X("%s, action=%d\n", __FUNCTION__, action);
++		switch (action)
++		{
++			case RTW_WLAN_ACTION_ADDBA_REQ: //ADDBA request
++
++				_rtw_memcpy(&(pmlmeinfo->ADDBA_req), &(frame_body[2]), sizeof(struct ADDBA_request));
++				//process_addba_req(padapter, (u8*)&(pmlmeinfo->ADDBA_req), GetAddr3Ptr(pframe));
++				process_addba_req(padapter, (u8*)&(pmlmeinfo->ADDBA_req), addr);
++				
++				if(pmlmeinfo->bAcceptAddbaReq == _TRUE)
++				{
++					issue_action_BA(padapter, addr, RTW_WLAN_ACTION_ADDBA_RESP, 0);
++				}
++				else
++				{
++					issue_action_BA(padapter, addr, RTW_WLAN_ACTION_ADDBA_RESP, 37);//reject ADDBA Req
++				}
++								
++				break;
++
++			case RTW_WLAN_ACTION_ADDBA_RESP: //ADDBA response
++
++				//status = frame_body[3] | (frame_body[4] << 8); //endian issue
++				status = RTW_GET_LE16(&frame_body[3]);
++				tid = ((frame_body[5] >> 2) & 0x7);
++
++				if (status == 0)
++				{	//successful					
++					DBG_871X("agg_enable for TID=%d\n", tid);
++					psta->htpriv.agg_enable_bitmap |= 1 << tid;					
++					psta->htpriv.candidate_tid_bitmap &= ~BIT(tid);				
++				}
++				else
++				{					
++					psta->htpriv.agg_enable_bitmap &= ~BIT(tid);					
++				}
++
++				//DBG_871X("marc: ADDBA RSP: %x\n", pmlmeinfo->agg_enable_bitmap);
++				break;
++
++			case RTW_WLAN_ACTION_DELBA: //DELBA
++				if ((frame_body[3] & BIT(3)) == 0)
++				{
++					psta->htpriv.agg_enable_bitmap &= ~(1 << ((frame_body[3] >> 4) & 0xf));
++					psta->htpriv.candidate_tid_bitmap &= ~(1 << ((frame_body[3] >> 4) & 0xf));
++					
++					//reason_code = frame_body[4] | (frame_body[5] << 8);
++					reason_code = RTW_GET_LE16(&frame_body[4]);
++				}
++				else if((frame_body[3] & BIT(3)) == BIT(3))
++				{						
++					tid = (frame_body[3] >> 4) & 0x0F;
++				
++					preorder_ctrl =  &psta->recvreorder_ctrl[tid];
++					preorder_ctrl->enable = _FALSE;
++					preorder_ctrl->indicate_seq = 0xffff;
++					#ifdef DBG_RX_SEQ
++					DBG_871X("DBG_RX_SEQ %s:%d indicate_seq:%u \n", __FUNCTION__, __LINE__,
++						preorder_ctrl->indicate_seq);
++					#endif
++				}
++				
++				DBG_871X("%s(): DELBA: %x(%x)\n", __FUNCTION__,pmlmeinfo->agg_enable_bitmap, reason_code);
++				//todo: how to notify the host while receiving DELETE BA
++				break;
++
++			default:
++				break;
++		}
++	}
++
++	return _SUCCESS;
++}
++
++#ifdef CONFIG_P2P
++
++static int get_reg_classes_full_count(struct p2p_channels channel_list) {
++	int cnt = 0;
++	int i;
++
++	for (i = 0; i < channel_list.reg_classes; i++) {
++		cnt += channel_list.reg_class[i].channels;
++	}
++
++	return cnt;
++}
++
++static void get_channel_cnt_24g_5gl_5gh(  struct mlme_ext_priv *pmlmeext, u8* p24g_cnt, u8* p5gl_cnt, u8* p5gh_cnt )
++{
++	int	i = 0;
++
++	*p24g_cnt = 0;
++	*p5gl_cnt = 0;
++	*p5gh_cnt = 0;	
++	
++	for( i = 0; i < pmlmeext->max_chan_nums; i++ )
++	{
++		if ( pmlmeext->channel_set[ i ].ChannelNum <= 14 )
++		{
++			(*p24g_cnt)++;
++		}
++		else if ( ( pmlmeext->channel_set[ i ].ChannelNum > 14 ) && ( pmlmeext->channel_set[ i ].ChannelNum <= 48 ) )
++		{
++			//	Just include the channel 36, 40, 44, 48 channels for 5G low
++			(*p5gl_cnt)++;
++		}
++		else if ( ( pmlmeext->channel_set[ i ].ChannelNum >= 149 ) && ( pmlmeext->channel_set[ i ].ChannelNum <= 161 ) )
++		{
++			//	Just include the channel 149, 153, 157, 161 channels for 5G high
++			(*p5gh_cnt)++;
++		}
++	}
++}
++
++void issue_p2p_GO_request(_adapter *padapter, u8* raddr)
++{
++
++	unsigned char category = RTW_WLAN_CATEGORY_PUBLIC;
++	u8			action = P2P_PUB_ACTION_ACTION;
++	u32			p2poui = cpu_to_be32(P2POUI);
++	u8			oui_subtype = P2P_GO_NEGO_REQ;
++	u8			wpsie[ 255 ] = { 0x00 }, p2pie[ 255 ] = { 0x00 };
++	u8			wpsielen = 0, p2pielen = 0, i;
++	u8			channel_cnt_24g = 0, channel_cnt_5gl = 0, channel_cnt_5gh = 0;
++	u16			len_channellist_attr = 0;
++#ifdef CONFIG_WFD
++	u32					wfdielen = 0;
++#endif //CONFIG_WFD		
++	
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	unsigned char					*pframe;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	unsigned short				*fctrl;
++	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct wifidirect_info	*pwdinfo = &( padapter->wdinfo);
++
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++
++	DBG_871X( "[%s] In\n", __FUNCTION__ );
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);
++
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++
++	_rtw_memcpy(pwlanhdr->addr1, raddr, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr3, myid(&(padapter->eeprompriv)), ETH_ALEN);
++
++	SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq);
++	pmlmeext->mgnt_seq++;
++	SetFrameSubType(pframe, WIFI_ACTION);
++
++	pframe += sizeof(struct rtw_ieee80211_hdr_3addr);
++	pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr);
++
++	pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 4, (unsigned char *) &(p2poui), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(oui_subtype), &(pattrib->pktlen));	
++	pwdinfo->negotiation_dialog_token = 1;	//	Initialize the dialog value
++	pframe = rtw_set_fixed_ie(pframe, 1, &pwdinfo->negotiation_dialog_token, &(pattrib->pktlen));
++
++	
++
++	//	WPS Section
++	wpsielen = 0;
++	//	WPS OUI
++	*(u32*) ( wpsie ) = cpu_to_be32( WPSOUI );
++	wpsielen += 4;
++
++	//	WPS version
++	//	Type:
++	*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_VER1 );
++	wpsielen += 2;
++
++	//	Length:
++	*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0001 );
++	wpsielen += 2;
++
++	//	Value:
++	wpsie[wpsielen++] = WPS_VERSION_1;	//	Version 1.0
++
++	//	Device Password ID
++	//	Type:
++	*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_DEVICE_PWID );
++	wpsielen += 2;
++
++	//	Length:
++	*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0002 );
++	wpsielen += 2;
++
++	//	Value:
++
++	if ( pwdinfo->ui_got_wps_info == P2P_GOT_WPSINFO_PEER_DISPLAY_PIN )
++	{
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_DPID_USER_SPEC );
++	}
++	else if ( pwdinfo->ui_got_wps_info == P2P_GOT_WPSINFO_SELF_DISPLAY_PIN )
++	{
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_DPID_REGISTRAR_SPEC );
++	}
++	else if ( pwdinfo->ui_got_wps_info == P2P_GOT_WPSINFO_PBC )
++	{
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_DPID_PBC );
++	}
++
++	wpsielen += 2;
++
++	pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, wpsielen, (unsigned char *) wpsie, &pattrib->pktlen );
++
++
++	//	P2P IE Section.
++
++	//	P2P OUI
++	p2pielen = 0;
++	p2pie[ p2pielen++ ] = 0x50;
++	p2pie[ p2pielen++ ] = 0x6F;
++	p2pie[ p2pielen++ ] = 0x9A;
++	p2pie[ p2pielen++ ] = 0x09;	//	WFA P2P v1.0
++
++	//	Commented by Albert 20110306
++	//	According to the P2P Specification, the group negoitation request frame should contain 9 P2P attributes
++	//	1. P2P Capability
++	//	2. Group Owner Intent
++	//	3. Configuration Timeout
++	//	4. Listen Channel
++	//	5. Extended Listen Timing
++	//	6. Intended P2P Interface Address
++	//	7. Channel List
++	//	8. P2P Device Info
++	//	9. Operating Channel
++
++
++	//	P2P Capability
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_CAPABILITY;
++
++	//	Length:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0002 );
++	p2pielen += 2;
++
++	//	Value:
++	//	Device Capability Bitmap, 1 byte
++	p2pie[ p2pielen++ ] = DMP_P2P_DEVCAP_SUPPORT;
++
++	//	Group Capability Bitmap, 1 byte
++	if ( pwdinfo->persistent_supported )
++	{
++		p2pie[ p2pielen++ ] = P2P_GRPCAP_CROSS_CONN | P2P_GRPCAP_PERSISTENT_GROUP;
++	}
++	else
++	{
++		p2pie[ p2pielen++ ] = P2P_GRPCAP_CROSS_CONN;
++	}
++
++
++	//	Group Owner Intent
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_GO_INTENT;
++
++	//	Length:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0001 );
++	p2pielen += 2;
++
++	//	Value:
++	//	Todo the tie breaker bit.
++	p2pie[ p2pielen++ ] = ( ( pwdinfo->intent << 1 ) | BIT(0) );
++
++	//	Configuration Timeout
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_CONF_TIMEOUT;
++
++	//	Length:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0002 );
++	p2pielen += 2;
++
++	//	Value:
++	p2pie[ p2pielen++ ] = 200;	//	2 seconds needed to be the P2P GO
++	p2pie[ p2pielen++ ] = 200;	//	2 seconds needed to be the P2P Client
++
++
++	//	Listen Channel
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_LISTEN_CH;
++
++	//	Length:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0005 );
++	p2pielen += 2;
++
++	//	Value:
++	//	Country String
++	p2pie[ p2pielen++ ] = 'X';
++	p2pie[ p2pielen++ ] = 'X';
++	
++	//	The third byte should be set to 0x04.
++	//	Described in the "Operating Channel Attribute" section.
++	p2pie[ p2pielen++ ] = 0x04;
++
++	//	Operating Class
++	p2pie[ p2pielen++ ] = 0x51;	//	Copy from SD7
++	
++	//	Channel Number
++	p2pie[ p2pielen++ ] = pwdinfo->listen_channel;	//	listening channel number
++	
++
++	//	Extended Listen Timing ATTR
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_EX_LISTEN_TIMING;
++
++	//	Length:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0004 );
++	p2pielen += 2;
++
++	//	Value:
++	//	Availability Period
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0xFFFF );
++	p2pielen += 2;
++
++	//	Availability Interval
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0xFFFF );
++	p2pielen += 2;
++
++
++	//	Intended P2P Interface Address
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_INTENTED_IF_ADDR;
++
++	//	Length:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( ETH_ALEN );
++	p2pielen += 2;
++
++	//	Value:
++	_rtw_memcpy( p2pie + p2pielen, myid( &padapter->eeprompriv ), ETH_ALEN );
++	p2pielen += ETH_ALEN;
++
++
++	//	Channel List
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_CH_LIST;
++
++	// Length:
++	// Country String(3)
++	// + ( Operating Class (1) + Number of Channels(1) ) * Operation Classes (?)
++	// + number of channels in all classes
++	len_channellist_attr = 3
++	   + (1 + 1) * (u16)(pmlmeext->channel_list.reg_classes)
++	   + get_reg_classes_full_count(pmlmeext->channel_list);
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if ( check_buddy_fwstate(padapter, _FW_LINKED ) )
++	{
++		*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 5 + 1 );
++	}
++	else
++	{
++		*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( len_channellist_attr );
++	}
++#else
++
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( len_channellist_attr );
++
++#endif
++	p2pielen += 2;
++
++	//	Value:
++	//	Country String
++	p2pie[ p2pielen++ ] = 'X';
++	p2pie[ p2pielen++ ] = 'X';
++	
++	//	The third byte should be set to 0x04.
++	//	Described in the "Operating Channel Attribute" section.
++	p2pie[ p2pielen++ ] = 0x04;
++
++	//	Channel Entry List
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if ( check_buddy_fwstate(padapter, _FW_LINKED ) )
++	{
++		_adapter *pbuddy_adapter = padapter->pbuddy_adapter;	
++		struct mlme_ext_priv	*pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++
++		//	Operating Class
++		if ( pbuddy_mlmeext->cur_channel > 14 )
++		{
++			if ( pbuddy_mlmeext->cur_channel >= 149 )
++			{
++				p2pie[ p2pielen++ ] = 0x7c;
++			}
++			else
++			{
++				p2pie[ p2pielen++ ] = 0x73;
++			}
++		}
++		else
++		{
++			p2pie[ p2pielen++ ] = 0x51;
++		}
++
++		//	Number of Channels
++		//	Just support 1 channel and this channel is AP's channel
++		p2pie[ p2pielen++ ] = 1;
++
++		//	Channel List
++		p2pie[ p2pielen++ ] = pbuddy_mlmeext->cur_channel;
++	}
++	else
++	{
++		int i,j;
++		for (j = 0; j < pmlmeext->channel_list.reg_classes; j++) {
++			//	Operating Class
++			p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].reg_class;
++
++			//	Number of Channels
++			p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channels;
++
++			//	Channel List
++			for (i = 0; i < pmlmeext->channel_list.reg_class[j].channels; i++) {
++				p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channel[i];
++			}
++		}
++	}
++#else // CONFIG_CONCURRENT_MODE
++	{
++		int i,j;
++		for (j = 0; j < pmlmeext->channel_list.reg_classes; j++) {
++			//	Operating Class
++			p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].reg_class;
++
++			//	Number of Channels
++			p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channels;
++
++			//	Channel List
++			for (i = 0; i < pmlmeext->channel_list.reg_class[j].channels; i++) {
++				p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channel[i];
++			}
++		}
++	}
++#endif // CONFIG_CONCURRENT_MODE
++
++	//	Device Info
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_DEVICE_INFO;
++
++	//	Length:
++	//	21 -> P2P Device Address (6bytes) + Config Methods (2bytes) + Primary Device Type (8bytes) 
++	//	+ NumofSecondDevType (1byte) + WPS Device Name ID field (2bytes) + WPS Device Name Len field (2bytes)
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 21 + pwdinfo->device_name_len );
++	p2pielen += 2;
++
++	//	Value:
++	//	P2P Device Address
++	_rtw_memcpy( p2pie + p2pielen, myid( &padapter->eeprompriv ), ETH_ALEN );
++	p2pielen += ETH_ALEN;
++
++	//	Config Method
++	//	This field should be big endian. Noted by P2P specification.
++
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( pwdinfo->supported_wps_cm );
++
++	p2pielen += 2;
++
++	//	Primary Device Type
++	//	Category ID
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_CID_MULIT_MEDIA );
++	p2pielen += 2;
++
++	//	OUI
++	*(u32*) ( p2pie + p2pielen ) = cpu_to_be32( WPSOUI );
++	p2pielen += 4;
++
++	//	Sub Category ID
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_SCID_MEDIA_SERVER );
++	p2pielen += 2;
++
++	//	Number of Secondary Device Types
++	p2pie[ p2pielen++ ] = 0x00;	//	No Secondary Device Type List
++
++	//	Device Name
++	//	Type:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_ATTR_DEVICE_NAME );
++	p2pielen += 2;
++
++	//	Length:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( pwdinfo->device_name_len );
++	p2pielen += 2;
++
++	//	Value:
++	_rtw_memcpy( p2pie + p2pielen, pwdinfo->device_name , pwdinfo->device_name_len );
++	p2pielen += pwdinfo->device_name_len;	
++	
++
++	//	Operating Channel
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_OPERATING_CH;
++
++	//	Length:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0005 );
++	p2pielen += 2;
++
++	//	Value:
++	//	Country String
++	p2pie[ p2pielen++ ] = 'X';
++	p2pie[ p2pielen++ ] = 'X';
++	
++	//	The third byte should be set to 0x04.
++	//	Described in the "Operating Channel Attribute" section.
++	p2pie[ p2pielen++ ] = 0x04;
++
++	//	Operating Class
++	if ( pwdinfo->operating_channel <= 14 )
++	{
++		//	Operating Class
++		p2pie[ p2pielen++ ] = 0x51;
++	}
++	else if ( ( pwdinfo->operating_channel >= 36 ) && ( pwdinfo->operating_channel <= 48 ) )
++	{
++		//	Operating Class
++		p2pie[ p2pielen++ ] = 0x73;
++	}
++	else
++	{
++		//	Operating Class
++		p2pie[ p2pielen++ ] = 0x7c;
++	}
++
++	//	Channel Number
++	p2pie[ p2pielen++ ] = pwdinfo->operating_channel;	//	operating channel number
++
++	pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, p2pielen, (unsigned char *) p2pie, &pattrib->pktlen );		
++
++#ifdef CONFIG_WFD
++	wfdielen = build_nego_req_wfd_ie(pwdinfo, pframe);
++	pframe += wfdielen;
++	pattrib->pktlen += wfdielen;
++#endif //CONFIG_WFD
++
++	pattrib->last_txcmdsz = pattrib->pktlen;
++
++	dump_mgntframe(padapter, pmgntframe);
++
++	return;
++
++}
++
++
++void issue_p2p_GO_response(_adapter *padapter, u8* raddr, u8* frame_body,uint len, u8 result)
++{
++
++	unsigned char category = RTW_WLAN_CATEGORY_PUBLIC;
++	u8			action = P2P_PUB_ACTION_ACTION;
++	u32			p2poui = cpu_to_be32(P2POUI);
++	u8			oui_subtype = P2P_GO_NEGO_RESP;
++	u8			wpsie[ 255 ] = { 0x00 }, p2pie[ 255 ] = { 0x00 };
++	u8			p2pielen = 0, i;
++	uint			wpsielen = 0;
++	u16			wps_devicepassword_id = 0x0000;
++	uint			wps_devicepassword_id_len = 0;
++	u8			channel_cnt_24g = 0, channel_cnt_5gl = 0, channel_cnt_5gh;
++	u16			len_channellist_attr = 0;
++	
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	unsigned char					*pframe;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	unsigned short				*fctrl;
++	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct wifidirect_info	*pwdinfo = &( padapter->wdinfo);
++
++#ifdef CONFIG_WFD
++	u32					wfdielen = 0;
++#endif //CONFIG_WFD
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++
++	DBG_871X( "[%s] In, result = %d\n", __FUNCTION__,  result );
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);
++
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++
++	_rtw_memcpy(pwlanhdr->addr1, raddr, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr3, myid(&(padapter->eeprompriv)), ETH_ALEN);
++
++	SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq);
++	pmlmeext->mgnt_seq++;
++	SetFrameSubType(pframe, WIFI_ACTION);
++
++	pframe += sizeof(struct rtw_ieee80211_hdr_3addr);
++	pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr);
++
++	pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 4, (unsigned char *) &(p2poui), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(oui_subtype), &(pattrib->pktlen));	
++	pwdinfo->negotiation_dialog_token = frame_body[7];	//	The Dialog Token of provisioning discovery request frame.
++	pframe = rtw_set_fixed_ie(pframe, 1, &(pwdinfo->negotiation_dialog_token), &(pattrib->pktlen));
++
++	//	Commented by Albert 20110328
++	//	Try to get the device password ID from the WPS IE of group negotiation request frame
++	//	WiFi Direct test plan 5.1.15
++	rtw_get_wps_ie( frame_body + _PUBLIC_ACTION_IE_OFFSET_, len - _PUBLIC_ACTION_IE_OFFSET_, wpsie, &wpsielen);
++	rtw_get_wps_attr_content( wpsie, wpsielen, WPS_ATTR_DEVICE_PWID, (u8*) &wps_devicepassword_id, &wps_devicepassword_id_len);
++	wps_devicepassword_id = be16_to_cpu( wps_devicepassword_id );
++
++	_rtw_memset( wpsie, 0x00, 255 );
++	wpsielen = 0;
++
++	//	WPS Section
++	wpsielen = 0;
++	//	WPS OUI
++	*(u32*) ( wpsie ) = cpu_to_be32( WPSOUI );
++	wpsielen += 4;
++
++	//	WPS version
++	//	Type:
++	*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_VER1 );
++	wpsielen += 2;
++
++	//	Length:
++	*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0001 );
++	wpsielen += 2;
++
++	//	Value:
++	wpsie[wpsielen++] = WPS_VERSION_1;	//	Version 1.0
++
++	//	Device Password ID
++	//	Type:
++	*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_DEVICE_PWID );
++	wpsielen += 2;
++
++	//	Length:
++	*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0002 );
++	wpsielen += 2;
++
++	//	Value:
++	if ( wps_devicepassword_id == WPS_DPID_USER_SPEC )
++	{
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_DPID_REGISTRAR_SPEC );
++	}
++	else if ( wps_devicepassword_id == WPS_DPID_REGISTRAR_SPEC )
++	{
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_DPID_USER_SPEC );
++	}
++	else
++	{
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_DPID_PBC );
++	}
++	wpsielen += 2;
++
++	//	Commented by Kurt 20120113
++	//	If some device wants to do p2p handshake without sending prov_disc_req
++	//	We have to get peer_req_cm from here.
++	if(_rtw_memcmp( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "000", 3) )
++	{
++		if ( wps_devicepassword_id == WPS_DPID_USER_SPEC )
++		{
++			_rtw_memcpy( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "dis", 3 );
++		}
++		else if ( wps_devicepassword_id == WPS_DPID_REGISTRAR_SPEC )
++		{
++			_rtw_memcpy( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "pad", 3 );	
++		}
++		else
++		{
++			_rtw_memcpy( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "pbc", 3 );	
++		}
++	}
++
++	pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, wpsielen, (unsigned char *) wpsie, &pattrib->pktlen );
++
++
++	//	P2P IE Section.
++
++	//	P2P OUI
++	p2pielen = 0;
++	p2pie[ p2pielen++ ] = 0x50;
++	p2pie[ p2pielen++ ] = 0x6F;
++	p2pie[ p2pielen++ ] = 0x9A;
++	p2pie[ p2pielen++ ] = 0x09;	//	WFA P2P v1.0
++
++	//	Commented by Albert 20100908
++	//	According to the P2P Specification, the group negoitation response frame should contain 9 P2P attributes
++	//	1. Status
++	//	2. P2P Capability
++	//	3. Group Owner Intent
++	//	4. Configuration Timeout
++	//	5. Operating Channel
++	//	6. Intended P2P Interface Address
++	//	7. Channel List
++	//	8. Device Info
++	//	9. Group ID	( Only GO )
++
++
++	//	ToDo:
++
++	//	P2P Status
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_STATUS;
++
++	//	Length:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0001 );
++	p2pielen += 2;
++
++	//	Value:
++	p2pie[ p2pielen++ ] = result;
++	
++	//	P2P Capability
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_CAPABILITY;
++
++	//	Length:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0002 );
++	p2pielen += 2;
++
++	//	Value:
++	//	Device Capability Bitmap, 1 byte
++
++	if ( rtw_p2p_chk_role(pwdinfo, P2P_ROLE_CLIENT) )
++	{
++		//	Commented by Albert 2011/03/08
++		//	According to the P2P specification
++		//	if the sending device will be client, the P2P Capability should be reserved of group negotation response frame
++		p2pie[ p2pielen++ ] = 0;
++	}
++	else
++	{
++		//	Be group owner or meet the error case
++		p2pie[ p2pielen++ ] = DMP_P2P_DEVCAP_SUPPORT;
++	}
++	
++	//	Group Capability Bitmap, 1 byte
++	if ( pwdinfo->persistent_supported )
++	{
++		p2pie[ p2pielen++ ] = P2P_GRPCAP_CROSS_CONN | P2P_GRPCAP_PERSISTENT_GROUP;
++	}
++	else
++	{
++		p2pie[ p2pielen++ ] = P2P_GRPCAP_CROSS_CONN;
++	}
++
++	//	Group Owner Intent
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_GO_INTENT;
++
++	//	Length:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0001 );
++	p2pielen += 2;
++
++	//	Value:
++	if ( pwdinfo->peer_intent & 0x01 )
++	{
++		//	Peer's tie breaker bit is 1, our tie breaker bit should be 0
++		p2pie[ p2pielen++ ] = ( pwdinfo->intent << 1 );
++	}
++	else
++	{
++		//	Peer's tie breaker bit is 0, our tie breaker bit should be 1
++		p2pie[ p2pielen++ ] = ( ( pwdinfo->intent << 1 ) | BIT(0) );
++	}
++
++
++	//	Configuration Timeout
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_CONF_TIMEOUT;
++
++	//	Length:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0002 );
++	p2pielen += 2;
++
++	//	Value:
++	p2pie[ p2pielen++ ] = 200;	//	2 seconds needed to be the P2P GO
++	p2pie[ p2pielen++ ] = 200;	//	2 seconds needed to be the P2P Client
++
++	//	Operating Channel
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_OPERATING_CH;
++
++	//	Length:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0005 );
++	p2pielen += 2;
++
++	//	Value:
++	//	Country String
++	p2pie[ p2pielen++ ] = 'X';
++	p2pie[ p2pielen++ ] = 'X';
++	
++	//	The third byte should be set to 0x04.
++	//	Described in the "Operating Channel Attribute" section.
++	p2pie[ p2pielen++ ] = 0x04;
++
++	//	Operating Class
++	if ( pwdinfo->operating_channel <= 14 )
++	{
++		//	Operating Class
++		p2pie[ p2pielen++ ] = 0x51;
++	}
++	else if ( ( pwdinfo->operating_channel >= 36 ) && ( pwdinfo->operating_channel <= 48 ) )
++	{
++		//	Operating Class
++		p2pie[ p2pielen++ ] = 0x73;
++	}
++	else
++	{
++		//	Operating Class
++		p2pie[ p2pielen++ ] = 0x7c;
++	}
++	
++	//	Channel Number
++	p2pie[ p2pielen++ ] = pwdinfo->operating_channel;	//	operating channel number
++
++	//	Intended P2P Interface Address	
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_INTENTED_IF_ADDR;
++
++	//	Length:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( ETH_ALEN );
++	p2pielen += 2;
++
++	//	Value:
++	_rtw_memcpy( p2pie + p2pielen, myid( &padapter->eeprompriv ), ETH_ALEN );
++	p2pielen += ETH_ALEN;
++
++	//	Channel List
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_CH_LIST;
++
++	// Country String(3)
++	// + ( Operating Class (1) + Number of Channels(1) ) * Operation Classes (?)
++	// + number of channels in all classes
++	len_channellist_attr = 3
++	   + (1 + 1) * (u16)pmlmeext->channel_list.reg_classes
++	   + get_reg_classes_full_count(pmlmeext->channel_list);
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if ( check_buddy_fwstate(padapter, _FW_LINKED ) )
++	{
++		*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 5 + 1 );
++	}
++	else
++	{
++		*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( len_channellist_attr );
++	}
++#else
++
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( len_channellist_attr );
++
++ #endif
++	p2pielen += 2;
++
++	//	Value:
++	//	Country String
++	p2pie[ p2pielen++ ] = 'X';
++	p2pie[ p2pielen++ ] = 'X';
++	
++	//	The third byte should be set to 0x04.
++	//	Described in the "Operating Channel Attribute" section.
++	p2pie[ p2pielen++ ] = 0x04;
++
++	//	Channel Entry List
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if ( check_buddy_fwstate(padapter, _FW_LINKED ) )
++	{
++		_adapter *pbuddy_adapter = padapter->pbuddy_adapter;	
++		struct mlme_ext_priv	*pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++
++		//	Operating Class
++		if ( pbuddy_mlmeext->cur_channel > 14 )
++		{
++			if ( pbuddy_mlmeext->cur_channel >= 149 )
++			{
++				p2pie[ p2pielen++ ] = 0x7c;
++			}
++			else
++			{
++				p2pie[ p2pielen++ ] = 0x73;
++			}
++		}
++		else
++		{
++			p2pie[ p2pielen++ ] = 0x51;
++		}
++
++		//	Number of Channels
++		//	Just support 1 channel and this channel is AP's channel
++		p2pie[ p2pielen++ ] = 1;
++
++		//	Channel List
++		p2pie[ p2pielen++ ] = pbuddy_mlmeext->cur_channel;
++	}
++	else
++	{
++		int i, j;
++		for (j = 0; j < pmlmeext->channel_list.reg_classes; j++) {
++			//	Operating Class
++			p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].reg_class;
++
++			//	Number of Channels
++			p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channels;
++
++			//	Channel List
++			for (i = 0; i < pmlmeext->channel_list.reg_class[j].channels; i++) {
++				p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channel[i];
++			}
++		}
++	}
++#else // CONFIG_CONCURRENT_MODE
++	{
++		int i, j;
++		for (j = 0; j < pmlmeext->channel_list.reg_classes; j++) {
++			//	Operating Class
++			p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].reg_class;
++
++			//	Number of Channels
++			p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channels;
++
++			//	Channel List
++			for (i = 0; i < pmlmeext->channel_list.reg_class[j].channels; i++) {
++				p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channel[i];
++			}
++		}
++	}
++#endif // CONFIG_CONCURRENT_MODE
++	
++	//	Device Info
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_DEVICE_INFO;
++
++	//	Length:
++	//	21 -> P2P Device Address (6bytes) + Config Methods (2bytes) + Primary Device Type (8bytes) 
++	//	+ NumofSecondDevType (1byte) + WPS Device Name ID field (2bytes) + WPS Device Name Len field (2bytes)
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 21 + pwdinfo->device_name_len );
++	p2pielen += 2;
++
++	//	Value:
++	//	P2P Device Address
++	_rtw_memcpy( p2pie + p2pielen, myid( &padapter->eeprompriv ), ETH_ALEN );
++	p2pielen += ETH_ALEN;
++
++	//	Config Method
++	//	This field should be big endian. Noted by P2P specification.
++
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( pwdinfo->supported_wps_cm );
++
++	p2pielen += 2;
++
++	//	Primary Device Type
++	//	Category ID
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_CID_MULIT_MEDIA );
++	p2pielen += 2;
++
++	//	OUI
++	*(u32*) ( p2pie + p2pielen ) = cpu_to_be32( WPSOUI );
++	p2pielen += 4;
++
++	//	Sub Category ID
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_SCID_MEDIA_SERVER );
++	p2pielen += 2;
++
++	//	Number of Secondary Device Types
++	p2pie[ p2pielen++ ] = 0x00;	//	No Secondary Device Type List
++
++	//	Device Name
++	//	Type:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_ATTR_DEVICE_NAME );
++	p2pielen += 2;
++
++	//	Length:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( pwdinfo->device_name_len );
++	p2pielen += 2;
++
++	//	Value:
++	_rtw_memcpy( p2pie + p2pielen, pwdinfo->device_name , pwdinfo->device_name_len );
++	p2pielen += pwdinfo->device_name_len;	
++	
++	if ( rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO) )
++	{
++		//	Group ID Attribute
++		//	Type:
++		p2pie[ p2pielen++ ] = P2P_ATTR_GROUP_ID;
++
++		//	Length:
++		*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( ETH_ALEN + pwdinfo->nego_ssidlen );
++		p2pielen += 2;
++
++		//	Value:
++		//	p2P Device Address
++		_rtw_memcpy( p2pie + p2pielen , pwdinfo->device_addr, ETH_ALEN );
++		p2pielen += ETH_ALEN;
++
++		//	SSID
++		_rtw_memcpy( p2pie + p2pielen, pwdinfo->nego_ssid, pwdinfo->nego_ssidlen );
++		p2pielen += pwdinfo->nego_ssidlen;
++		
++	}
++	
++	pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, p2pielen, (unsigned char *) p2pie, &pattrib->pktlen );	
++	
++#ifdef CONFIG_WFD
++	wfdielen = build_nego_resp_wfd_ie(pwdinfo, pframe);
++	pframe += wfdielen;
++	pattrib->pktlen += wfdielen;
++#endif //CONFIG_WFD
++
++	pattrib->last_txcmdsz = pattrib->pktlen;
++
++	dump_mgntframe(padapter, pmgntframe);
++
++	return;
++
++}
++
++void issue_p2p_GO_confirm(_adapter *padapter, u8* raddr, u8 result)
++{
++
++	unsigned char category = RTW_WLAN_CATEGORY_PUBLIC;
++	u8			action = P2P_PUB_ACTION_ACTION;
++	u32			p2poui = cpu_to_be32(P2POUI);
++	u8			oui_subtype = P2P_GO_NEGO_CONF;
++	u8			wpsie[ 255 ] = { 0x00 }, p2pie[ 255 ] = { 0x00 };
++	u8			wpsielen = 0, p2pielen = 0;
++	
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	unsigned char					*pframe;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	unsigned short				*fctrl;
++	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct wifidirect_info	*pwdinfo = &( padapter->wdinfo);
++#ifdef CONFIG_WFD
++	u32					wfdielen = 0;
++#endif //CONFIG_WFD
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++
++	DBG_871X( "[%s] In\n", __FUNCTION__ );
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);
++
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++
++	_rtw_memcpy(pwlanhdr->addr1, raddr, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr3, myid(&(padapter->eeprompriv)), ETH_ALEN);
++
++	SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq);
++	pmlmeext->mgnt_seq++;
++	SetFrameSubType(pframe, WIFI_ACTION);
++
++	pframe += sizeof(struct rtw_ieee80211_hdr_3addr);
++	pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr);
++
++	pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 4, (unsigned char *) &(p2poui), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(oui_subtype), &(pattrib->pktlen));	
++	pframe = rtw_set_fixed_ie(pframe, 1, &(pwdinfo->negotiation_dialog_token), &(pattrib->pktlen));
++
++	
++
++	//	P2P IE Section.
++
++	//	P2P OUI
++	p2pielen = 0;
++	p2pie[ p2pielen++ ] = 0x50;
++	p2pie[ p2pielen++ ] = 0x6F;
++	p2pie[ p2pielen++ ] = 0x9A;
++	p2pie[ p2pielen++ ] = 0x09;	//	WFA P2P v1.0
++
++	//	Commented by Albert 20110306
++	//	According to the P2P Specification, the group negoitation request frame should contain 5 P2P attributes
++	//	1. Status
++	//	2. P2P Capability
++	//	3. Operating Channel
++	//	4. Channel List
++	//	5. Group ID	( if this WiFi is GO )
++
++	//	P2P Status
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_STATUS;
++
++	//	Length:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0001 );
++	p2pielen += 2;
++
++	//	Value:
++	p2pie[ p2pielen++ ] = result;
++
++	//	P2P Capability
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_CAPABILITY;
++
++	//	Length:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0002 );
++	p2pielen += 2;
++
++	//	Value:
++	//	Device Capability Bitmap, 1 byte
++	p2pie[ p2pielen++ ] = DMP_P2P_DEVCAP_SUPPORT;
++	
++	//	Group Capability Bitmap, 1 byte
++	if ( pwdinfo->persistent_supported )
++	{
++		p2pie[ p2pielen++ ] = P2P_GRPCAP_CROSS_CONN | P2P_GRPCAP_PERSISTENT_GROUP;
++	}
++	else
++	{
++		p2pie[ p2pielen++ ] = P2P_GRPCAP_CROSS_CONN;
++	}
++
++
++	//	Operating Channel
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_OPERATING_CH;
++
++	//	Length:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0005 );
++	p2pielen += 2;
++
++	//	Value:
++	//	Country String
++	p2pie[ p2pielen++ ] = 'X';
++	p2pie[ p2pielen++ ] = 'X';
++	
++	//	The third byte should be set to 0x04.
++	//	Described in the "Operating Channel Attribute" section.
++	p2pie[ p2pielen++ ] = 0x04;
++
++
++	if ( rtw_p2p_chk_role(pwdinfo, P2P_ROLE_CLIENT) )
++	{
++		if ( pwdinfo->peer_operating_ch <= 14 )
++		{
++			//	Operating Class
++			p2pie[ p2pielen++ ] = 0x51;
++		}
++		else if ( ( pwdinfo->peer_operating_ch >= 36 ) && ( pwdinfo->peer_operating_ch <= 48 ) )
++		{
++			//	Operating Class
++			p2pie[ p2pielen++ ] = 0x73;
++		}
++		else
++		{
++			//	Operating Class
++			p2pie[ p2pielen++ ] = 0x7c;
++		}
++		
++		p2pie[ p2pielen++ ] = pwdinfo->peer_operating_ch;
++	}
++	else
++	{
++		if ( pwdinfo->operating_channel <= 14 )
++		{
++			//	Operating Class
++			p2pie[ p2pielen++ ] = 0x51;
++		}
++		else if ( ( pwdinfo->operating_channel >= 36 ) && ( pwdinfo->operating_channel <= 48 ) )
++		{
++			//	Operating Class
++			p2pie[ p2pielen++ ] = 0x73;
++		}
++		else
++		{
++			//	Operating Class
++			p2pie[ p2pielen++ ] = 0x7c;
++		}
++		
++		//	Channel Number
++		p2pie[ p2pielen++ ] = pwdinfo->operating_channel;		//	Use the listen channel as the operating channel
++	}
++
++
++	//	Channel List
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_CH_LIST;
++
++	*(u16*) ( p2pie + p2pielen ) = 6;
++	p2pielen += 2;
++
++	//	Country String
++	p2pie[ p2pielen++ ] = 'X';
++	p2pie[ p2pielen++ ] = 'X';
++	
++	//	The third byte should be set to 0x04.
++	//	Described in the "Operating Channel Attribute" section.
++	p2pie[ p2pielen++ ] = 0x04;
++
++	//	Value:
++	if ( rtw_p2p_chk_role(pwdinfo, P2P_ROLE_CLIENT) )
++	{
++		if ( pwdinfo->peer_operating_ch <= 14 )
++		{
++			//	Operating Class
++			p2pie[ p2pielen++ ] = 0x51;
++		}
++		else if ( ( pwdinfo->peer_operating_ch >= 36 ) && ( pwdinfo->peer_operating_ch <= 48 ) )
++		{
++			//	Operating Class
++			p2pie[ p2pielen++ ] = 0x73;
++		}
++		else
++		{
++			//	Operating Class
++			p2pie[ p2pielen++ ] = 0x7c;
++		}
++		p2pie[ p2pielen++ ] = 1;
++		p2pie[ p2pielen++ ] = pwdinfo->peer_operating_ch;
++	}
++	else
++	{
++		if ( pwdinfo->operating_channel <= 14 )
++		{
++			//	Operating Class
++			p2pie[ p2pielen++ ] = 0x51;
++		}
++		else if ( ( pwdinfo->operating_channel >= 36 ) && ( pwdinfo->operating_channel <= 48 ) )
++		{
++			//	Operating Class
++			p2pie[ p2pielen++ ] = 0x73;
++		}
++		else
++		{
++			//	Operating Class
++			p2pie[ p2pielen++ ] = 0x7c;
++		}
++		
++		//	Channel Number
++		p2pie[ p2pielen++ ] = 1;
++		p2pie[ p2pielen++ ] = pwdinfo->operating_channel;		//	Use the listen channel as the operating channel
++	}
++
++	if (rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO) )
++	{
++		//	Group ID Attribute
++		//	Type:
++		p2pie[ p2pielen++ ] = P2P_ATTR_GROUP_ID;
++
++		//	Length:
++		*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( ETH_ALEN + pwdinfo->nego_ssidlen );
++		p2pielen += 2;
++
++		//	Value:
++		//	p2P Device Address
++		_rtw_memcpy( p2pie + p2pielen , pwdinfo->device_addr, ETH_ALEN );
++		p2pielen += ETH_ALEN;
++
++		//	SSID
++		_rtw_memcpy( p2pie + p2pielen, pwdinfo->nego_ssid, pwdinfo->nego_ssidlen );
++		p2pielen += pwdinfo->nego_ssidlen;
++	}
++	
++	pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, p2pielen, (unsigned char *) p2pie, &pattrib->pktlen );
++	
++#ifdef CONFIG_WFD
++	wfdielen = build_nego_confirm_wfd_ie(pwdinfo, pframe);
++	pframe += wfdielen;
++	pattrib->pktlen += wfdielen;
++#endif //CONFIG_WFD
++
++	pattrib->last_txcmdsz = pattrib->pktlen;
++
++	dump_mgntframe(padapter, pmgntframe);
++
++	return;
++
++}
++
++void issue_p2p_invitation_request(_adapter *padapter, u8* raddr )
++{
++
++	unsigned char category = RTW_WLAN_CATEGORY_PUBLIC;
++	u8			action = P2P_PUB_ACTION_ACTION;
++	u32			p2poui = cpu_to_be32(P2POUI);
++	u8			oui_subtype = P2P_INVIT_REQ;
++	u8			p2pie[ 255 ] = { 0x00 };
++	u8			p2pielen = 0, i;
++	u8			dialogToken = 3;
++	u8			channel_cnt_24g = 0, channel_cnt_5gl = 0, channel_cnt_5gh = 0;
++	u16			len_channellist_attr = 0;	
++#ifdef CONFIG_WFD
++	u32					wfdielen = 0;
++#endif //CONFIG_WFD
++#ifdef CONFIG_CONCURRENT_MODE
++	_adapter				*pbuddy_adapter = padapter->pbuddy_adapter;
++	struct wifidirect_info	*pbuddy_wdinfo = &pbuddy_adapter->wdinfo;
++	struct mlme_priv		*pbuddy_mlmepriv = &pbuddy_adapter->mlmepriv;
++	struct mlme_ext_priv	*pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++#endif
++
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	unsigned char					*pframe;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	unsigned short				*fctrl;
++	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct wifidirect_info	*pwdinfo = &( padapter->wdinfo);
++
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);
++
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++
++	_rtw_memcpy(pwlanhdr->addr1, raddr, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr3, raddr,  ETH_ALEN);
++
++	SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq);
++	pmlmeext->mgnt_seq++;
++	SetFrameSubType(pframe, WIFI_ACTION);
++
++	pframe += sizeof(struct rtw_ieee80211_hdr_3addr);
++	pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr);
++
++	pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 4, (unsigned char *) &(p2poui), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(oui_subtype), &(pattrib->pktlen));	
++	pframe = rtw_set_fixed_ie(pframe, 1, &(dialogToken), &(pattrib->pktlen));
++
++	//	P2P IE Section.
++
++	//	P2P OUI
++	p2pielen = 0;
++	p2pie[ p2pielen++ ] = 0x50;
++	p2pie[ p2pielen++ ] = 0x6F;
++	p2pie[ p2pielen++ ] = 0x9A;
++	p2pie[ p2pielen++ ] = 0x09;	//	WFA P2P v1.0
++
++	//	Commented by Albert 20101011
++	//	According to the P2P Specification, the P2P Invitation request frame should contain 7 P2P attributes
++	//	1. Configuration Timeout
++	//	2. Invitation Flags
++	//	3. Operating Channel	( Only GO )
++	//	4. P2P Group BSSID	( Should be included if I am the GO )
++	//	5. Channel List
++	//	6. P2P Group ID
++	//	7. P2P Device Info
++
++	//	Configuration Timeout
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_CONF_TIMEOUT;
++
++	//	Length:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0002 );
++	p2pielen += 2;
++
++	//	Value:
++	p2pie[ p2pielen++ ] = 200;	//	2 seconds needed to be the P2P GO
++	p2pie[ p2pielen++ ] = 200;	//	2 seconds needed to be the P2P Client
++
++	//	Invitation Flags
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_INVITATION_FLAGS;
++
++	//	Length:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0001 );
++	p2pielen += 2;
++
++	//	Value:
++	p2pie[ p2pielen++ ] = P2P_INVITATION_FLAGS_PERSISTENT;
++
++
++	//	Operating Channel
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_OPERATING_CH;
++
++	//	Length:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0005 );
++	p2pielen += 2;
++
++	//	Value:
++	//	Country String
++	p2pie[ p2pielen++ ] = 'X';
++	p2pie[ p2pielen++ ] = 'X';
++	
++	//	The third byte should be set to 0x04.
++	//	Described in the "Operating Channel Attribute" section.
++	p2pie[ p2pielen++ ] = 0x04;
++
++	//	Operating Class
++	if ( pwdinfo->invitereq_info.operating_ch <= 14 )
++		p2pie[ p2pielen++ ] = 0x51;
++	else if ( ( pwdinfo->invitereq_info.operating_ch >= 36 ) && ( pwdinfo->invitereq_info.operating_ch <= 48 ) )
++		p2pie[ p2pielen++ ] = 0x73;
++	else
++		p2pie[ p2pielen++ ] = 0x7c;
++	
++	//	Channel Number
++	p2pie[ p2pielen++ ] = pwdinfo->invitereq_info.operating_ch;	//	operating channel number
++
++	if ( _rtw_memcmp( myid( &padapter->eeprompriv ), pwdinfo->invitereq_info.go_bssid, ETH_ALEN ) )
++	{
++		//	P2P Group BSSID
++		//	Type:
++		p2pie[ p2pielen++ ] = P2P_ATTR_GROUP_BSSID;
++
++		//	Length:
++		*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( ETH_ALEN );
++		p2pielen += 2;
++
++		//	Value:
++		//	P2P Device Address for GO
++		_rtw_memcpy( p2pie + p2pielen, pwdinfo->invitereq_info.go_bssid, ETH_ALEN );
++		p2pielen += ETH_ALEN;
++	}
++
++	//	Channel List
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_CH_LIST;
++
++	
++	//	Length:
++	// Country String(3)
++	// + ( Operating Class (1) + Number of Channels(1) ) * Operation Classes (?)
++	// + number of channels in all classes
++	len_channellist_attr = 3
++	   + (1 + 1) * (u16)pmlmeext->channel_list.reg_classes
++	   + get_reg_classes_full_count(pmlmeext->channel_list);
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if ( check_buddy_fwstate(padapter, _FW_LINKED ) )
++	{
++		*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 5 + 1 );
++	}
++	else
++	{
++		*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( len_channellist_attr );
++	}
++#else
++
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( len_channellist_attr );
++
++ #endif
++	p2pielen += 2;
++
++	//	Value:
++	//	Country String
++	p2pie[ p2pielen++ ] = 'X';
++	p2pie[ p2pielen++ ] = 'X';
++	
++	//	The third byte should be set to 0x04.
++	//	Described in the "Operating Channel Attribute" section.
++	p2pie[ p2pielen++ ] = 0x04;
++
++	//	Channel Entry List
++#ifdef CONFIG_CONCURRENT_MODE
++	if ( check_buddy_fwstate(padapter, _FW_LINKED ) )
++	{
++		_adapter *pbuddy_adapter = padapter->pbuddy_adapter;	
++		struct mlme_ext_priv	*pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++
++		//	Operating Class
++		if ( pbuddy_mlmeext->cur_channel > 14 )
++		{
++			if ( pbuddy_mlmeext->cur_channel >= 149 )
++			{
++				p2pie[ p2pielen++ ] = 0x7c;
++			}
++			else
++			{
++				p2pie[ p2pielen++ ] = 0x73;
++			}
++		}
++		else
++		{
++			p2pie[ p2pielen++ ] = 0x51;
++		}
++
++		//	Number of Channels
++		//	Just support 1 channel and this channel is AP's channel
++		p2pie[ p2pielen++ ] = 1;
++
++		//	Channel List
++		p2pie[ p2pielen++ ] = pbuddy_mlmeext->cur_channel;
++	}
++	else
++	{
++		int i, j;
++		for (j = 0; j < pmlmeext->channel_list.reg_classes; j++) {
++			//	Operating Class
++			p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].reg_class;
++
++			//	Number of Channels
++			p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channels;
++
++			//	Channel List
++			for (i = 0; i < pmlmeext->channel_list.reg_class[j].channels; i++) {
++				p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channel[i];
++			}
++		}
++	}
++#else // CONFIG_CONCURRENT_MODE
++	{
++		int i, j;
++		for (j = 0; j < pmlmeext->channel_list.reg_classes; j++) {
++			//	Operating Class
++			p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].reg_class;
++
++			//	Number of Channels
++			p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channels;
++
++			//	Channel List
++			for (i = 0; i < pmlmeext->channel_list.reg_class[j].channels; i++) {
++				p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channel[i];
++			}
++		}
++	}
++#endif // CONFIG_CONCURRENT_MODE
++
++
++	//	P2P Group ID
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_GROUP_ID;
++
++	//	Length:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 6 + pwdinfo->invitereq_info.ssidlen );
++	p2pielen += 2;
++
++	//	Value:
++	//	P2P Device Address for GO
++	_rtw_memcpy( p2pie + p2pielen, pwdinfo->invitereq_info.go_bssid, ETH_ALEN );
++	p2pielen += ETH_ALEN;
++
++	//	SSID
++	_rtw_memcpy( p2pie + p2pielen, pwdinfo->invitereq_info.go_ssid, pwdinfo->invitereq_info.ssidlen );
++	p2pielen += pwdinfo->invitereq_info.ssidlen;
++	
++
++	//	Device Info
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_DEVICE_INFO;
++
++	//	Length:
++	//	21 -> P2P Device Address (6bytes) + Config Methods (2bytes) + Primary Device Type (8bytes) 
++	//	+ NumofSecondDevType (1byte) + WPS Device Name ID field (2bytes) + WPS Device Name Len field (2bytes)
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 21 + pwdinfo->device_name_len );
++	p2pielen += 2;
++	
++	//	Value:
++	//	P2P Device Address
++	_rtw_memcpy( p2pie + p2pielen, myid( &padapter->eeprompriv ), ETH_ALEN );
++	p2pielen += ETH_ALEN;
++
++	//	Config Method
++	//	This field should be big endian. Noted by P2P specification.
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_CONFIG_METHOD_DISPLAY );
++	p2pielen += 2;
++
++	//	Primary Device Type
++	//	Category ID
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_CID_MULIT_MEDIA );
++	p2pielen += 2;
++
++	//	OUI
++	*(u32*) ( p2pie + p2pielen ) = cpu_to_be32( WPSOUI );
++	p2pielen += 4;
++
++	//	Sub Category ID
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_SCID_MEDIA_SERVER );
++	p2pielen += 2;
++
++	//	Number of Secondary Device Types
++	p2pie[ p2pielen++ ] = 0x00;	//	No Secondary Device Type List
++
++	//	Device Name
++	//	Type:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_ATTR_DEVICE_NAME );
++	p2pielen += 2;
++
++	//	Length:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( pwdinfo->device_name_len );
++	p2pielen += 2;
++
++	//	Value:
++	_rtw_memcpy( p2pie + p2pielen, pwdinfo->device_name, pwdinfo->device_name_len );
++	p2pielen += pwdinfo->device_name_len;
++		
++	pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, p2pielen, (unsigned char *) p2pie, &pattrib->pktlen );	
++
++#ifdef CONFIG_WFD
++	wfdielen = build_invitation_req_wfd_ie(pwdinfo, pframe);
++	pframe += wfdielen;
++	pattrib->pktlen += wfdielen;
++#endif //CONFIG_WFD	
++
++	pattrib->last_txcmdsz = pattrib->pktlen;
++
++	dump_mgntframe(padapter, pmgntframe);
++
++	return;
++
++}
++
++void issue_p2p_invitation_response(_adapter *padapter, u8* raddr, u8 dialogToken, u8 status_code)
++{
++
++	unsigned char category = RTW_WLAN_CATEGORY_PUBLIC;
++	u8			action = P2P_PUB_ACTION_ACTION;
++	u32			p2poui = cpu_to_be32(P2POUI);
++	u8			oui_subtype = P2P_INVIT_RESP;
++	u8			p2pie[ 255 ] = { 0x00 };
++	u8			p2pielen = 0, i;
++	u8			channel_cnt_24g = 0, channel_cnt_5gl = 0, channel_cnt_5gh = 0;
++	u16			len_channellist_attr = 0;
++#ifdef CONFIG_CONCURRENT_MODE
++	_adapter				*pbuddy_adapter = padapter->pbuddy_adapter;
++	struct wifidirect_info	*pbuddy_wdinfo = &pbuddy_adapter->wdinfo;
++	struct mlme_priv		*pbuddy_mlmepriv = &pbuddy_adapter->mlmepriv;
++	struct mlme_ext_priv	*pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++#endif	
++#ifdef CONFIG_WFD
++	u32					wfdielen = 0;
++#endif //CONFIG_WFD
++	
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	unsigned char					*pframe;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	unsigned short				*fctrl;
++	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct wifidirect_info	*pwdinfo = &( padapter->wdinfo);
++
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);
++
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++
++	_rtw_memcpy(pwlanhdr->addr1, raddr, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr3, raddr,  ETH_ALEN);
++
++	SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq);
++	pmlmeext->mgnt_seq++;
++	SetFrameSubType(pframe, WIFI_ACTION);
++
++	pframe += sizeof(struct rtw_ieee80211_hdr_3addr);
++	pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr);
++
++	pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 4, (unsigned char *) &(p2poui), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(oui_subtype), &(pattrib->pktlen));	
++	pframe = rtw_set_fixed_ie(pframe, 1, &(dialogToken), &(pattrib->pktlen));
++
++	//	P2P IE Section.
++
++	//	P2P OUI
++	p2pielen = 0;
++	p2pie[ p2pielen++ ] = 0x50;
++	p2pie[ p2pielen++ ] = 0x6F;
++	p2pie[ p2pielen++ ] = 0x9A;
++	p2pie[ p2pielen++ ] = 0x09;	//	WFA P2P v1.0
++
++	//	Commented by Albert 20101005
++	//	According to the P2P Specification, the P2P Invitation response frame should contain 5 P2P attributes
++	//	1. Status
++	//	2. Configuration Timeout
++	//	3. Operating Channel	( Only GO )
++	//	4. P2P Group BSSID	( Only GO )
++	//	5. Channel List
++
++	//	P2P Status
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_STATUS;
++
++	//	Length:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0001 );
++	p2pielen += 2;
++
++	//	Value:
++	//	When status code is P2P_STATUS_FAIL_INFO_UNAVAILABLE.
++	//	Sent the event receiving the P2P Invitation Req frame to DMP UI.
++	//	DMP had to compare the MAC address to find out the profile.
++	//	So, the WiFi driver will send the P2P_STATUS_FAIL_INFO_UNAVAILABLE to NB.
++	//	If the UI found the corresponding profile, the WiFi driver sends the P2P Invitation Req
++	//	to NB to rebuild the persistent group.
++	p2pie[ p2pielen++ ] = status_code;
++	
++	//	Configuration Timeout
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_CONF_TIMEOUT;
++
++	//	Length:
++	*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0002 );
++	p2pielen += 2;
++
++	//	Value:
++	p2pie[ p2pielen++ ] = 200;	//	2 seconds needed to be the P2P GO
++	p2pie[ p2pielen++ ] = 200;	//	2 seconds needed to be the P2P Client
++
++	if( status_code == P2P_STATUS_SUCCESS )
++	{
++		if( rtw_p2p_chk_role( pwdinfo, P2P_ROLE_GO ) )
++		{
++			//	The P2P Invitation request frame asks this Wi-Fi device to be the P2P GO
++			//	In this case, the P2P Invitation response frame should carry the two more P2P attributes.
++			//	First one is operating channel attribute.
++			//	Second one is P2P Group BSSID attribute.
++
++			//	Operating Channel
++			//	Type:
++			p2pie[ p2pielen++ ] = P2P_ATTR_OPERATING_CH;
++
++			//	Length:
++			*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0005 );
++			p2pielen += 2;
++
++			//	Value:
++			//	Country String
++			p2pie[ p2pielen++ ] = 'X';
++			p2pie[ p2pielen++ ] = 'X';
++		
++			//	The third byte should be set to 0x04.
++			//	Described in the "Operating Channel Attribute" section.
++			p2pie[ p2pielen++ ] = 0x04;
++
++			//	Operating Class
++			p2pie[ p2pielen++ ] = 0x51;	//	Copy from SD7
++		
++			//	Channel Number
++			p2pie[ p2pielen++ ] = pwdinfo->operating_channel;	//	operating channel number
++			
++
++			//	P2P Group BSSID
++			//	Type:
++			p2pie[ p2pielen++ ] = P2P_ATTR_GROUP_BSSID;
++
++			//	Length:
++			*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( ETH_ALEN );
++			p2pielen += 2;
++
++			//	Value:
++			//	P2P Device Address for GO
++			_rtw_memcpy( p2pie + p2pielen, myid( &padapter->eeprompriv ), ETH_ALEN );
++			p2pielen += ETH_ALEN;
++
++		}
++
++		//	Channel List
++		//	Type:
++		p2pie[ p2pielen++ ] = P2P_ATTR_CH_LIST;
++
++		//	Length:
++		// Country String(3)
++		// + ( Operating Class (1) + Number of Channels(1) ) * Operation Classes (?)
++		// + number of channels in all classes
++		len_channellist_attr = 3
++			+ (1 + 1) * (u16)pmlmeext->channel_list.reg_classes
++			+ get_reg_classes_full_count(pmlmeext->channel_list);
++
++#ifdef CONFIG_CONCURRENT_MODE
++		if ( check_buddy_fwstate(padapter, _FW_LINKED ) )
++		{
++			*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 5 + 1 );
++		}
++		else
++		{
++			*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( len_channellist_attr );
++		}
++#else
++
++		*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( len_channellist_attr );
++
++#endif
++		p2pielen += 2;
++
++		//	Value:
++		//	Country String
++		p2pie[ p2pielen++ ] = 'X';
++		p2pie[ p2pielen++ ] = 'X';
++
++		//	The third byte should be set to 0x04.
++		//	Described in the "Operating Channel Attribute" section.
++		p2pie[ p2pielen++ ] = 0x04;
++
++		//	Channel Entry List
++#ifdef CONFIG_CONCURRENT_MODE
++		if ( check_buddy_fwstate(padapter, _FW_LINKED ) )
++		{
++			_adapter *pbuddy_adapter = padapter->pbuddy_adapter;	
++			struct mlme_ext_priv	*pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++
++			//	Operating Class
++			if ( pbuddy_mlmeext->cur_channel > 14 )
++			{
++				if ( pbuddy_mlmeext->cur_channel >= 149 )
++				{
++					p2pie[ p2pielen++ ] = 0x7c;
++				}
++				else
++				{
++					p2pie[ p2pielen++ ] = 0x73;
++				}
++			}
++			else
++			{
++				p2pie[ p2pielen++ ] = 0x51;
++			}
++
++			//	Number of Channels
++			//	Just support 1 channel and this channel is AP's channel
++			p2pie[ p2pielen++ ] = 1;
++
++			//	Channel List
++			p2pie[ p2pielen++ ] = pbuddy_mlmeext->cur_channel;
++		}
++		else
++		{
++			int i, j;
++			for (j = 0; j < pmlmeext->channel_list.reg_classes; j++) {
++				//	Operating Class
++				p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].reg_class;
++
++				//	Number of Channels
++				p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channels;
++
++				//	Channel List
++				for (i = 0; i < pmlmeext->channel_list.reg_class[j].channels; i++) {
++					p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channel[i];
++				}
++			}
++		}
++#else // CONFIG_CONCURRENT_MODE
++		{
++			int i, j;
++			for (j = 0; j < pmlmeext->channel_list.reg_classes; j++) {
++				//	Operating Class
++				p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].reg_class;
++
++				//	Number of Channels
++				p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channels;
++
++				//	Channel List
++				for (i = 0; i < pmlmeext->channel_list.reg_class[j].channels; i++) {
++					p2pie[p2pielen++] = pmlmeext->channel_list.reg_class[j].channel[i];
++				}
++			}
++		}
++#endif // CONFIG_CONCURRENT_MODE
++	}
++		
++	pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, p2pielen, (unsigned char *) p2pie, &pattrib->pktlen );	
++	
++#ifdef CONFIG_WFD
++	wfdielen = build_invitation_resp_wfd_ie(pwdinfo, pframe);
++	pframe += wfdielen;
++	pattrib->pktlen += wfdielen;
++#endif //CONFIG_WFD
++
++	pattrib->last_txcmdsz = pattrib->pktlen;
++
++	dump_mgntframe(padapter, pmgntframe);
++
++	return;
++
++}
++
++void issue_p2p_provision_request(_adapter *padapter, u8* pssid, u8 ussidlen, u8* pdev_raddr )
++{
++	unsigned char category = RTW_WLAN_CATEGORY_PUBLIC;
++	u8			action = P2P_PUB_ACTION_ACTION;
++	u8			dialogToken = 1;
++	u32			p2poui = cpu_to_be32(P2POUI);
++	u8			oui_subtype = P2P_PROVISION_DISC_REQ;
++	u8			wpsie[ 100 ] = { 0x00 };
++	u8			wpsielen = 0;
++	u32			p2pielen = 0;
++#ifdef CONFIG_WFD
++	u32					wfdielen = 0;
++#endif //CONFIG_WFD		
++	
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	unsigned char					*pframe;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	unsigned short				*fctrl;
++	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct wifidirect_info	*pwdinfo = &(padapter->wdinfo);
++
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++
++	DBG_871X( "[%s] In\n", __FUNCTION__ );
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);
++
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++
++	_rtw_memcpy(pwlanhdr->addr1, pdev_raddr, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr3, pdev_raddr, ETH_ALEN);
++
++	SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq);
++	pmlmeext->mgnt_seq++;
++	SetFrameSubType(pframe, WIFI_ACTION);
++
++	pframe += sizeof(struct rtw_ieee80211_hdr_3addr);
++	pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr);
++
++	pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 4, (unsigned char *) &(p2poui), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(oui_subtype), &(pattrib->pktlen));	
++	pframe = rtw_set_fixed_ie(pframe, 1, &(dialogToken), &(pattrib->pktlen));		
++
++	p2pielen = build_prov_disc_request_p2p_ie( pwdinfo, pframe, pssid, ussidlen, pdev_raddr );
++
++	pframe += p2pielen;
++	pattrib->pktlen += p2pielen;
++
++	wpsielen = 0;
++	//	WPS OUI
++	*(u32*) ( wpsie ) = cpu_to_be32( WPSOUI );
++	wpsielen += 4;
++
++	//	WPS version
++	//	Type:
++	*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_VER1 );
++	wpsielen += 2;
++
++	//	Length:
++	*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0001 );
++	wpsielen += 2;
++
++	//	Value:
++	wpsie[wpsielen++] = WPS_VERSION_1;	//	Version 1.0
++
++	//	Config Method
++	//	Type:
++	*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_CONF_METHOD );
++	wpsielen += 2;
++
++	//	Length:
++	*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0002 );
++	wpsielen += 2;
++
++	//	Value:
++	*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( pwdinfo->tx_prov_disc_info.wps_config_method_request );
++	wpsielen += 2;
++
++	pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, wpsielen, (unsigned char *) wpsie, &pattrib->pktlen );
++
++
++#ifdef CONFIG_WFD
++	wfdielen = build_provdisc_req_wfd_ie(pwdinfo, pframe);
++	pframe += wfdielen;
++	pattrib->pktlen += wfdielen;
++#endif //CONFIG_WFD
++
++	pattrib->last_txcmdsz = pattrib->pktlen;
++
++	dump_mgntframe(padapter, pmgntframe);
++
++	return;
++
++}
++
++
++u8 is_matched_in_profilelist( u8* peermacaddr, struct profile_info* profileinfo )
++{
++	u8 i, match_result = 0;
++
++	DBG_871X( "[%s] peermac = %.2X %.2X %.2X %.2X %.2X %.2X\n", __FUNCTION__,
++	  	    peermacaddr[0], peermacaddr[1],peermacaddr[2],peermacaddr[3],peermacaddr[4],peermacaddr[5]);
++	
++	for( i = 0; i < P2P_MAX_PERSISTENT_GROUP_NUM; i++, profileinfo++ )
++	{
++	       DBG_871X( "[%s] profileinfo_mac = %.2X %.2X %.2X %.2X %.2X %.2X\n", __FUNCTION__,
++		   	    profileinfo->peermac[0], profileinfo->peermac[1],profileinfo->peermac[2],profileinfo->peermac[3],profileinfo->peermac[4],profileinfo->peermac[5]);		   
++		if ( _rtw_memcmp( peermacaddr, profileinfo->peermac, ETH_ALEN ) )
++		{
++			match_result = 1;
++			DBG_871X( "[%s] Match!\n", __FUNCTION__ );
++			break;
++		}
++	}
++	
++	return (match_result );
++}
++
++void issue_probersp_p2p(_adapter *padapter, unsigned char *da)
++{
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	unsigned char					*pframe;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	unsigned short				*fctrl;	
++	unsigned char					*mac;
++	struct xmit_priv	*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	//WLAN_BSSID_EX 		*cur_network = &(pmlmeinfo->network);
++	u16					beacon_interval = 100;
++	u16					capInfo = 0;
++	struct wifidirect_info	*pwdinfo = &(padapter->wdinfo);
++	u8					wpsie[255] = { 0x00 };
++	u32					wpsielen = 0, p2pielen = 0;
++#ifdef CONFIG_WFD
++	u32					wfdielen = 0;
++#endif //CONFIG_WFD
++#ifdef CONFIG_INTEL_WIDI
++	u8 zero_array_check[L2SDTA_SERVICE_VE_LEN] = { 0x00 };
++#endif //CONFIG_INTEL_WIDI
++
++	//DBG_871X("%s\n", __FUNCTION__);
++	
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++	
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);	
++	
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++		
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;	
++	
++	mac = myid(&(padapter->eeprompriv));
++	
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++	_rtw_memcpy(pwlanhdr->addr1, da, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr2, mac, ETH_ALEN);
++	
++	//	Use the device address for BSSID field.	
++	_rtw_memcpy(pwlanhdr->addr3, mac, ETH_ALEN);
++
++	SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq);
++	pmlmeext->mgnt_seq++;
++	SetFrameSubType(fctrl, WIFI_PROBERSP);
++	
++	pattrib->hdrlen = sizeof(struct rtw_ieee80211_hdr_3addr);
++	pattrib->pktlen = pattrib->hdrlen;
++	pframe += pattrib->hdrlen;
++
++	//timestamp will be inserted by hardware
++	pframe += 8;
++	pattrib->pktlen += 8;
++
++	// beacon interval: 2 bytes
++	_rtw_memcpy(pframe, (unsigned char *) &beacon_interval, 2); 
++	pframe += 2;
++	pattrib->pktlen += 2;
++
++	//	capability info: 2 bytes
++	//	ESS and IBSS bits must be 0 (defined in the 3.1.2.1.1 of WiFi Direct Spec)
++	capInfo |= cap_ShortPremble;
++	capInfo |= cap_ShortSlot;
++	
++	_rtw_memcpy(pframe, (unsigned char *) &capInfo, 2);
++	pframe += 2;
++	pattrib->pktlen += 2;
++
++
++	// SSID
++	pframe = rtw_set_ie(pframe, _SSID_IE_, 7, pwdinfo->p2p_wildcard_ssid, &pattrib->pktlen);
++
++	// supported rates...
++	//	Use the OFDM rate in the P2P probe response frame. ( 6(B), 9(B), 12, 18, 24, 36, 48, 54 )
++	pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_, 8, pwdinfo->support_rate, &pattrib->pktlen);
++
++	// DS parameter set
++	pframe = rtw_set_ie(pframe, _DSSET_IE_, 1, (unsigned char *)&pwdinfo->listen_channel, &pattrib->pktlen);
++
++#ifdef CONFIG_IOCTL_CFG80211
++	if(wdev_to_priv(padapter->rtw_wdev)->p2p_enabled && pwdinfo->driver_interface == DRIVER_CFG80211 )
++	{
++		if( pmlmepriv->wps_probe_resp_ie != NULL && pmlmepriv->p2p_probe_resp_ie != NULL )
++		{
++			//WPS IE
++			_rtw_memcpy(pframe, pmlmepriv->wps_probe_resp_ie, pmlmepriv->wps_probe_resp_ie_len);
++			pattrib->pktlen += pmlmepriv->wps_probe_resp_ie_len;
++			pframe += pmlmepriv->wps_probe_resp_ie_len;
++
++			//P2P IE
++			_rtw_memcpy(pframe, pmlmepriv->p2p_probe_resp_ie, pmlmepriv->p2p_probe_resp_ie_len);
++			pattrib->pktlen += pmlmepriv->p2p_probe_resp_ie_len;
++			pframe += pmlmepriv->p2p_probe_resp_ie_len;
++		}
++	}
++	else
++#endif //CONFIG_IOCTL_CFG80211		
++	{
++
++		//	Todo: WPS IE
++		//	Noted by Albert 20100907
++		//	According to the WPS specification, all the WPS attribute is presented by Big Endian.
++
++		wpsielen = 0;
++		//	WPS OUI
++		*(u32*) ( wpsie ) = cpu_to_be32( WPSOUI );
++		wpsielen += 4;
++
++		//	WPS version
++		//	Type:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_VER1 );
++		wpsielen += 2;
++
++		//	Length:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0001 );
++		wpsielen += 2;
++
++		//	Value:
++		wpsie[wpsielen++] = WPS_VERSION_1;	//	Version 1.0
++
++#ifdef CONFIG_INTEL_WIDI
++		//	Commented by Kurt
++		//	Appended WiDi info. only if we did issued_probereq_widi(), and then we saved ven. ext. in pmlmepriv->sa_ext.
++		if(  _rtw_memcmp(pmlmepriv->sa_ext, zero_array_check, L2SDTA_SERVICE_VE_LEN) == _FALSE 
++			|| pmlmepriv->num_p2p_sdt != 0 )
++		{
++			//Sec dev type
++			*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_SEC_DEV_TYPE_LIST );
++			wpsielen += 2;
++
++			//	Length:
++			*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0008 );
++			wpsielen += 2;
++
++			//	Value:
++			//	Category ID
++			*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_PDT_CID_DISPLAYS );
++			wpsielen += 2;
++
++			//	OUI
++			*(u32*) ( wpsie + wpsielen ) = cpu_to_be32( INTEL_DEV_TYPE_OUI );
++			wpsielen += 4;
++
++			*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_PDT_SCID_WIDI_CONSUMER_SINK );
++			wpsielen += 2;
++
++			if(  _rtw_memcmp(pmlmepriv->sa_ext, zero_array_check, L2SDTA_SERVICE_VE_LEN) == _FALSE )
++			{
++				//	Vendor Extension
++				_rtw_memcpy( wpsie + wpsielen, pmlmepriv->sa_ext, L2SDTA_SERVICE_VE_LEN );
++				wpsielen += L2SDTA_SERVICE_VE_LEN;
++			}
++		}
++#endif //CONFIG_INTEL_WIDI
++
++		//	WiFi Simple Config State
++		//	Type:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_SIMPLE_CONF_STATE );
++		wpsielen += 2;
++
++		//	Length:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0001 );
++		wpsielen += 2;
++
++		//	Value:
++		wpsie[wpsielen++] = WPS_WSC_STATE_NOT_CONFIG;	//	Not Configured.
++
++		//	Response Type
++		//	Type:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_RESP_TYPE );
++		wpsielen += 2;
++
++		//	Length:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0001 );
++		wpsielen += 2;
++
++		//	Value:
++		wpsie[wpsielen++] = WPS_RESPONSE_TYPE_8021X;
++
++		//	UUID-E
++		//	Type:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_UUID_E );
++		wpsielen += 2;
++
++		//	Length:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0010 );
++		wpsielen += 2;
++
++		//	Value:
++		if (pwdinfo->external_uuid == 0) {
++			_rtw_memset( wpsie + wpsielen, 0x0, 16 );
++			_rtw_memcpy( wpsie + wpsielen, myid( &padapter->eeprompriv ), ETH_ALEN );
++		} else {
++			_rtw_memcpy( wpsie + wpsielen, pwdinfo->uuid, 0x10 );
++		}
++		wpsielen += 0x10;
++
++		//	Manufacturer
++		//	Type:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_MANUFACTURER );
++		wpsielen += 2;
++
++		//	Length:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0007 );
++		wpsielen += 2;
++
++		//	Value:
++		_rtw_memcpy( wpsie + wpsielen, "Realtek", 7 );
++		wpsielen += 7;
++
++		//	Model Name
++		//	Type:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_MODEL_NAME );
++		wpsielen += 2;
++
++		//	Length:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0006 );
++		wpsielen += 2;	
++
++		//	Value:
++		_rtw_memcpy( wpsie + wpsielen, "8192CU", 6 );
++		wpsielen += 6;
++
++		//	Model Number
++		//	Type:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_MODEL_NUMBER );
++		wpsielen += 2;
++
++		//	Length:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0001 );
++		wpsielen += 2;
++
++		//	Value:
++		wpsie[ wpsielen++ ] = 0x31;		//	character 1
++
++		//	Serial Number
++		//	Type:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_SERIAL_NUMBER );
++		wpsielen += 2;
++
++		//	Length:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( ETH_ALEN );
++		wpsielen += 2;
++
++		//	Value:
++		_rtw_memcpy( wpsie + wpsielen, "123456" , ETH_ALEN );
++		wpsielen += ETH_ALEN;
++
++		//	Primary Device Type
++		//	Type:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_PRIMARY_DEV_TYPE );
++		wpsielen += 2;
++
++		//	Length:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0008 );
++		wpsielen += 2;
++
++		//	Value:
++		//	Category ID
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_PDT_CID_RTK_WIDI );
++		wpsielen += 2;
++
++		//	OUI
++		*(u32*) ( wpsie + wpsielen ) = cpu_to_be32( WPSOUI );
++		wpsielen += 4;
++
++		//	Sub Category ID
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_PDT_SCID_RTK_DMP );
++		wpsielen += 2;
++
++		//	Device Name
++		//	Type:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_DEVICE_NAME );
++		wpsielen += 2;
++
++		//	Length:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( pwdinfo->device_name_len );
++		wpsielen += 2;
++
++		//	Value:
++		_rtw_memcpy( wpsie + wpsielen, pwdinfo->device_name, pwdinfo->device_name_len );
++		wpsielen += pwdinfo->device_name_len;
++
++		//	Config Method
++		//	Type:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_CONF_METHOD );
++		wpsielen += 2;
++
++		//	Length:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0002 );
++		wpsielen += 2;
++
++		//	Value:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( pwdinfo->supported_wps_cm );
++		wpsielen += 2;
++		
++
++		pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, wpsielen, (unsigned char *) wpsie, &pattrib->pktlen );
++		
++
++		p2pielen = build_probe_resp_p2p_ie(pwdinfo, pframe);
++		pframe += p2pielen;
++		pattrib->pktlen += p2pielen;
++	}
++
++#ifdef CONFIG_WFD
++#ifdef CONFIG_IOCTL_CFG80211
++	if ( _TRUE == pwdinfo->wfd_info->wfd_enable )
++#endif //CONFIG_IOCTL_CFG80211
++	{
++		wfdielen = build_probe_resp_wfd_ie(pwdinfo, pframe, 0);
++		pframe += wfdielen;
++		pattrib->pktlen += wfdielen;
++	}
++#ifdef CONFIG_IOCTL_CFG80211
++	else if (pmlmepriv->wfd_probe_resp_ie != NULL && pmlmepriv->wfd_probe_resp_ie_len>0)
++	{
++		//WFD IE
++		_rtw_memcpy(pframe, pmlmepriv->wfd_probe_resp_ie, pmlmepriv->wfd_probe_resp_ie_len);
++		pattrib->pktlen += pmlmepriv->wfd_probe_resp_ie_len;
++		pframe += pmlmepriv->wfd_probe_resp_ie_len;		
++	}
++#endif //CONFIG_IOCTL_CFG80211
++#endif //CONFIG_WFD	
++
++	pattrib->last_txcmdsz = pattrib->pktlen;
++	
++
++	dump_mgntframe(padapter, pmgntframe);
++	
++	return;
++
++}
++
++int _issue_probereq_p2p(_adapter *padapter, u8 *da, int wait_ack)
++{
++	int ret = _FAIL;
++	struct xmit_frame		*pmgntframe;
++	struct pkt_attrib		*pattrib;
++	unsigned char			*pframe;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	unsigned short		*fctrl;
++	unsigned char			*mac;
++	unsigned char			bssrate[NumRates];
++	struct xmit_priv		*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	int	bssrate_len = 0;
++	u8	bc_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
++	struct wifidirect_info	*pwdinfo = &(padapter->wdinfo);	
++	u8					wpsie[255] = { 0x00 }, p2pie[ 255 ] = { 0x00 };
++	u16					wpsielen = 0, p2pielen = 0;
++#ifdef CONFIG_WFD
++	u32					wfdielen = 0;
++#endif //CONFIG_WFD
++
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		goto exit;
++	}
++
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);
++
++
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	mac = myid(&(padapter->eeprompriv));
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++
++	if (da) {
++		_rtw_memcpy(pwlanhdr->addr1, da, ETH_ALEN);
++		_rtw_memcpy(pwlanhdr->addr3, da, ETH_ALEN);
++	} else {
++		if ( ( pwdinfo->p2p_info.scan_op_ch_only ) || ( pwdinfo->rx_invitereq_info.scan_op_ch_only ) )
++		{
++			//	This two flags will be set when this is only the P2P client mode.
++			_rtw_memcpy(pwlanhdr->addr1, pwdinfo->p2p_peer_interface_addr, ETH_ALEN);
++			_rtw_memcpy(pwlanhdr->addr3, pwdinfo->p2p_peer_interface_addr, ETH_ALEN);
++		}
++		else
++		{
++			//	broadcast probe request frame
++			_rtw_memcpy(pwlanhdr->addr1, bc_addr, ETH_ALEN);
++			_rtw_memcpy(pwlanhdr->addr3, bc_addr, ETH_ALEN);
++		}
++ 	}
++	_rtw_memcpy(pwlanhdr->addr2, mac, ETH_ALEN);
++
++	SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq);
++	pmlmeext->mgnt_seq++;
++	SetFrameSubType(pframe, WIFI_PROBEREQ);
++
++	pframe += sizeof (struct rtw_ieee80211_hdr_3addr);
++	pattrib->pktlen = sizeof (struct rtw_ieee80211_hdr_3addr);
++
++	if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_TX_PROVISION_DIS_REQ))
++	{
++		pframe = rtw_set_ie(pframe, _SSID_IE_, pwdinfo->tx_prov_disc_info.ssid.SsidLength, pwdinfo->tx_prov_disc_info.ssid.Ssid, &(pattrib->pktlen));
++	}
++	else
++	{
++		pframe = rtw_set_ie(pframe, _SSID_IE_, P2P_WILDCARD_SSID_LEN, pwdinfo->p2p_wildcard_ssid, &(pattrib->pktlen));
++	}
++	//	Use the OFDM rate in the P2P probe request frame. ( 6(B), 9(B), 12(B), 24(B), 36, 48, 54 )
++	pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_, 8, pwdinfo->support_rate, &pattrib->pktlen);
++
++#ifdef CONFIG_IOCTL_CFG80211
++	if(wdev_to_priv(padapter->rtw_wdev)->p2p_enabled && pwdinfo->driver_interface == DRIVER_CFG80211 )
++	{
++		if( pmlmepriv->wps_probe_req_ie != NULL && pmlmepriv->p2p_probe_req_ie != NULL )
++		{
++			//WPS IE
++			_rtw_memcpy(pframe, pmlmepriv->wps_probe_req_ie, pmlmepriv->wps_probe_req_ie_len);
++			pattrib->pktlen += pmlmepriv->wps_probe_req_ie_len;
++			pframe += pmlmepriv->wps_probe_req_ie_len;
++
++			//P2P IE
++			_rtw_memcpy(pframe, pmlmepriv->p2p_probe_req_ie, pmlmepriv->p2p_probe_req_ie_len);
++			pattrib->pktlen += pmlmepriv->p2p_probe_req_ie_len;
++			pframe += pmlmepriv->p2p_probe_req_ie_len;
++		}
++	}
++	else
++#endif //CONFIG_IOCTL_CFG80211
++	{
++
++		//	WPS IE
++		//	Noted by Albert 20110221
++		//	According to the WPS specification, all the WPS attribute is presented by Big Endian.
++
++		wpsielen = 0;
++		//	WPS OUI
++		*(u32*) ( wpsie ) = cpu_to_be32( WPSOUI );
++		wpsielen += 4;
++
++		//	WPS version
++		//	Type:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_VER1 );
++		wpsielen += 2;
++
++		//	Length:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0001 );
++		wpsielen += 2;
++
++		//	Value:
++		wpsie[wpsielen++] = WPS_VERSION_1;	//	Version 1.0
++
++		if( pmlmepriv->wps_probe_req_ie == NULL )
++		{
++			//	UUID-E
++			//	Type:
++			*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_UUID_E );
++			wpsielen += 2;
++
++			//	Length:
++			*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0010 );
++			wpsielen += 2;
++
++			//	Value:
++			if (pwdinfo->external_uuid == 0) {
++				_rtw_memset( wpsie + wpsielen, 0x0, 16 );
++				_rtw_memcpy( wpsie + wpsielen, myid( &padapter->eeprompriv ), ETH_ALEN );
++			} else {
++				_rtw_memcpy( wpsie + wpsielen, pwdinfo->uuid, 0x10 );
++			}
++			wpsielen += 0x10;
++
++			//	Config Method
++			//	Type:
++			*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_CONF_METHOD );
++			wpsielen += 2;
++
++			//	Length:
++			*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0002 );
++			wpsielen += 2;
++
++			//	Value:
++			*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( pwdinfo->supported_wps_cm );
++			wpsielen += 2;
++		}
++
++		//	Device Name
++		//	Type:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_DEVICE_NAME );
++		wpsielen += 2;
++
++		//	Length:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( pwdinfo->device_name_len );
++		wpsielen += 2;
++
++		//	Value:
++		_rtw_memcpy( wpsie + wpsielen, pwdinfo->device_name, pwdinfo->device_name_len );
++		wpsielen += pwdinfo->device_name_len;
++
++		//	Primary Device Type
++		//	Type:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_PRIMARY_DEV_TYPE );
++		wpsielen += 2;
++
++		//	Length:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0008 );
++		wpsielen += 2;
++
++		//	Value:
++		//	Category ID
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_PDT_CID_MULIT_MEDIA );
++		wpsielen += 2;
++
++		//	OUI
++		*(u32*) ( wpsie + wpsielen ) = cpu_to_be32( WPSOUI );
++		wpsielen += 4;
++
++		//	Sub Category ID
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_PDT_SCID_MEDIA_SERVER );
++		wpsielen += 2;
++
++		//	Device Password ID
++		//	Type:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_DEVICE_PWID );
++		wpsielen += 2;
++
++		//	Length:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0002 );
++		wpsielen += 2;
++
++		//	Value:
++		*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_DPID_REGISTRAR_SPEC );	//	Registrar-specified
++		wpsielen += 2;	
++
++		pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, wpsielen, (unsigned char *) wpsie, &pattrib->pktlen );
++		
++		//	P2P OUI
++		p2pielen = 0;
++		p2pie[ p2pielen++ ] = 0x50;
++		p2pie[ p2pielen++ ] = 0x6F;
++		p2pie[ p2pielen++ ] = 0x9A;
++		p2pie[ p2pielen++ ] = 0x09;	//	WFA P2P v1.0
++
++		//	Commented by Albert 20110221
++		//	According to the P2P Specification, the probe request frame should contain 5 P2P attributes
++		//	1. P2P Capability
++		//	2. P2P Device ID if this probe request wants to find the specific P2P device
++		//	3. Listen Channel
++		//	4. Extended Listen Timing
++		//	5. Operating Channel if this WiFi is working as the group owner now
++
++		//	P2P Capability
++		//	Type:
++		p2pie[ p2pielen++ ] = P2P_ATTR_CAPABILITY;
++
++		//	Length:
++		*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0002 );
++		p2pielen += 2;
++
++		//	Value:
++		//	Device Capability Bitmap, 1 byte
++		p2pie[ p2pielen++ ] = DMP_P2P_DEVCAP_SUPPORT;
++		
++		//	Group Capability Bitmap, 1 byte
++		if ( pwdinfo->persistent_supported )
++			p2pie[ p2pielen++ ] = P2P_GRPCAP_PERSISTENT_GROUP | DMP_P2P_GRPCAP_SUPPORT;
++		else
++			p2pie[ p2pielen++ ] = DMP_P2P_GRPCAP_SUPPORT;
++
++		//	Listen Channel
++		//	Type:
++		p2pie[ p2pielen++ ] = P2P_ATTR_LISTEN_CH;
++
++		//	Length:
++		*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0005 );
++		p2pielen += 2;
++
++		//	Value:
++		//	Country String
++		p2pie[ p2pielen++ ] = 'X';
++		p2pie[ p2pielen++ ] = 'X';
++		
++		//	The third byte should be set to 0x04.
++		//	Described in the "Operating Channel Attribute" section.
++		p2pie[ p2pielen++ ] = 0x04;
++
++		//	Operating Class
++		p2pie[ p2pielen++ ] = 0x51;	//	Copy from SD7
++		
++		//	Channel Number
++		p2pie[ p2pielen++ ] = pwdinfo->listen_channel;	//	listen channel
++		
++
++		//	Extended Listen Timing
++		//	Type:
++		p2pie[ p2pielen++ ] = P2P_ATTR_EX_LISTEN_TIMING;
++
++		//	Length:
++		*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0004 );
++		p2pielen += 2;
++
++		//	Value:
++		//	Availability Period
++		*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0xFFFF );
++		p2pielen += 2;
++
++		//	Availability Interval
++		*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0xFFFF );
++		p2pielen += 2;
++
++		if ( rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO) )
++		{
++			//	Operating Channel (if this WiFi is working as the group owner now)
++			//	Type:
++			p2pie[ p2pielen++ ] = P2P_ATTR_OPERATING_CH;
++
++			//	Length:
++			*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0005 );
++			p2pielen += 2;
++
++			//	Value:
++			//	Country String
++			p2pie[ p2pielen++ ] = 'X';
++			p2pie[ p2pielen++ ] = 'X';
++		
++			//	The third byte should be set to 0x04.
++			//	Described in the "Operating Channel Attribute" section.
++			p2pie[ p2pielen++ ] = 0x04;
++
++			//	Operating Class
++			p2pie[ p2pielen++ ] = 0x51;	//	Copy from SD7
++		
++			//	Channel Number
++			p2pie[ p2pielen++ ] = pwdinfo->operating_channel;	//	operating channel number
++			
++		}
++
++		pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, p2pielen, (unsigned char *) p2pie, &pattrib->pktlen );
++
++		if( pmlmepriv->wps_probe_req_ie != NULL )
++		{
++			//WPS IE
++			_rtw_memcpy(pframe, pmlmepriv->wps_probe_req_ie, pmlmepriv->wps_probe_req_ie_len);
++			pattrib->pktlen += pmlmepriv->wps_probe_req_ie_len;
++			pframe += pmlmepriv->wps_probe_req_ie_len;
++		}
++	}
++
++#ifdef CONFIG_WFD
++#ifdef CONFIG_IOCTL_CFG80211
++	if ( _TRUE == pwdinfo->wfd_info->wfd_enable )
++#endif
++	{
++		wfdielen = build_probe_req_wfd_ie(pwdinfo, pframe);
++		pframe += wfdielen;
++		pattrib->pktlen += wfdielen;
++	}
++#ifdef CONFIG_IOCTL_CFG80211
++	else if (pmlmepriv->wfd_probe_req_ie != NULL && pmlmepriv->wfd_probe_req_ie_len>0)		
++	{
++		//WFD IE
++		_rtw_memcpy(pframe, pmlmepriv->wfd_probe_req_ie, pmlmepriv->wfd_probe_req_ie_len);
++		pattrib->pktlen += pmlmepriv->wfd_probe_req_ie_len;
++		pframe += pmlmepriv->wfd_probe_req_ie_len;		
++	}
++#endif //CONFIG_IOCTL_CFG80211
++#endif //CONFIG_WFD
++
++	pattrib->last_txcmdsz = pattrib->pktlen;
++
++	RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("issuing probe_req, tx_len=%d\n", pattrib->last_txcmdsz));
++
++	if (wait_ack) {
++		ret = dump_mgntframe_and_wait_ack(padapter, pmgntframe);
++	} else {
++		dump_mgntframe(padapter, pmgntframe);
++		ret = _SUCCESS;
++	}
++
++exit:
++	return ret;
++}
++
++inline void issue_probereq_p2p(_adapter *adapter, u8 *da)
++{
++	_issue_probereq_p2p(adapter, da, _FALSE);
++}
++
++int issue_probereq_p2p_ex(_adapter *adapter, u8 *da, int try_cnt, int wait_ms)
++{
++	int ret;
++	int i = 0;
++	u32 start = rtw_get_current_time();
++
++	do
++	{
++		ret = _issue_probereq_p2p(adapter, da, wait_ms>0?_TRUE:_FALSE);
++
++		i++;
++
++		if (adapter->bDriverStopped || adapter->bSurpriseRemoved)
++			break;
++
++		if(i < try_cnt && wait_ms > 0 && ret==_FAIL)
++			rtw_msleep_os(wait_ms);
++
++	}while((i<try_cnt) && ((ret==_FAIL)||(wait_ms==0)));
++
++	if (ret != _FAIL) {
++		ret = _SUCCESS;
++		#ifndef DBG_XMIT_ACK
++		goto exit;
++		#endif
++	}
++
++	if (try_cnt && wait_ms) {
++		if (da)
++			DBG_871X(FUNC_ADPT_FMT" to "MAC_FMT", ch:%u%s, %d/%d in %u ms\n",
++				FUNC_ADPT_ARG(adapter), MAC_ARG(da), rtw_get_oper_ch(adapter),
++				ret==_SUCCESS?", acked":"", i, try_cnt, rtw_get_passing_time_ms(start));
++		else
++			DBG_871X(FUNC_ADPT_FMT", ch:%u%s, %d/%d in %u ms\n",
++				FUNC_ADPT_ARG(adapter), rtw_get_oper_ch(adapter),
++				ret==_SUCCESS?", acked":"", i, try_cnt, rtw_get_passing_time_ms(start));
++	}
++exit:
++	return ret;
++}
++
++#endif //CONFIG_P2P
++
++s32 rtw_action_public_decache(union recv_frame *recv_frame, s32 token)
++{
++	_adapter *adapter = recv_frame->u.hdr.adapter;
++	struct mlme_ext_priv *mlmeext = &(adapter->mlmeextpriv);
++	u8 *frame = recv_frame->u.hdr.rx_data;
++	u16 seq_ctrl = ( (recv_frame->u.hdr.attrib.seq_num&0xffff) << 4) |
++		(recv_frame->u.hdr.attrib.frag_num & 0xf);
++	
++	if (GetRetry(frame)) {
++		if (token >= 0) {
++			if ((seq_ctrl == mlmeext->action_public_rxseq)
++				&& (token == mlmeext->action_public_dialog_token))
++			{
++				DBG_871X(FUNC_ADPT_FMT" seq_ctrl=0x%x, rxseq=0x%x, token:%d\n",
++					FUNC_ADPT_ARG(adapter), seq_ctrl, mlmeext->action_public_rxseq, token);
++				return _FAIL;
++			}
++		} else {
++			if (seq_ctrl == mlmeext->action_public_rxseq) {
++				DBG_871X(FUNC_ADPT_FMT" seq_ctrl=0x%x, rxseq=0x%x\n",
++					FUNC_ADPT_ARG(adapter), seq_ctrl, mlmeext->action_public_rxseq);
++				return _FAIL;
++			}
++		}
++	}
++	
++	mlmeext->action_public_rxseq = seq_ctrl;
++	
++	if (token >= 0)
++		mlmeext->action_public_dialog_token = token;
++
++	return _SUCCESS;
++}
++
++unsigned int on_action_public_p2p(union recv_frame *precv_frame)
++{
++	_adapter *padapter = precv_frame->u.hdr.adapter;
++	u8 *pframe = precv_frame->u.hdr.rx_data;
++	uint len = precv_frame->u.hdr.len;
++	u8 *frame_body;
++	u8 dialogToken=0;
++#ifdef CONFIG_P2P
++	u8 *p2p_ie;
++	u32	p2p_ielen, wps_ielen;
++	struct	wifidirect_info	*pwdinfo = &( padapter->wdinfo );
++	u8	result = P2P_STATUS_SUCCESS;
++	u8	empty_addr[ETH_ALEN] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
++	u8 *merged_p2pie = NULL;
++	u32 merged_p2p_ielen = 0;
++#endif //CONFIG_P2P
++
++	frame_body = (unsigned char *)(pframe + sizeof(struct rtw_ieee80211_hdr_3addr));
++
++	dialogToken = frame_body[7];
++
++	if (rtw_action_public_decache(precv_frame, dialogToken) == _FAIL)
++		return _FAIL;
++	
++#ifdef CONFIG_P2P
++	_cancel_timer_ex( &pwdinfo->reset_ch_sitesurvey );
++#ifdef CONFIG_IOCTL_CFG80211
++	if(wdev_to_priv(padapter->rtw_wdev)->p2p_enabled && pwdinfo->driver_interface == DRIVER_CFG80211)
++	{
++		rtw_cfg80211_rx_p2p_action_public(padapter, pframe, len);
++	}
++	else
++#endif //CONFIG_IOCTL_CFG80211
++	{
++		//	Do nothing if the driver doesn't enable the P2P function.
++		if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE) || rtw_p2p_chk_state(pwdinfo, P2P_STATE_IDLE))
++			return _SUCCESS;
++
++		len -= sizeof(struct rtw_ieee80211_hdr_3addr);
++
++		switch( frame_body[ 6 ] )//OUI Subtype
++		{
++			case P2P_GO_NEGO_REQ:
++			{
++				DBG_871X( "[%s] Got GO Nego Req Frame\n", __FUNCTION__);
++				_rtw_memset( &pwdinfo->groupid_info, 0x00, sizeof( struct group_id_info ) );
++
++				if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_RX_PROVISION_DIS_REQ))
++				{
++					rtw_p2p_set_state(pwdinfo, rtw_p2p_pre_state(pwdinfo));
++				}
++
++				if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_FAIL))
++				{
++					//	Commented by Albert 20110526
++					//	In this case, this means the previous nego fail doesn't be reset yet.
++					_cancel_timer_ex( &pwdinfo->restore_p2p_state_timer );
++					//	Restore the previous p2p state
++					rtw_p2p_set_state(pwdinfo, rtw_p2p_pre_state(pwdinfo));
++					DBG_871X( "[%s] Restore the previous p2p state to %d\n", __FUNCTION__, rtw_p2p_state(pwdinfo) );						
++				}					
++#ifdef CONFIG_CONCURRENT_MODE
++				if ( check_buddy_fwstate(padapter, _FW_LINKED ) )
++				{
++					_cancel_timer_ex( &pwdinfo->ap_p2p_switch_timer );
++				}
++#endif // CONFIG_CONCURRENT_MODE
++
++				//	Commented by Kurt 20110902
++				//Add if statement to avoid receiving duplicate prov disc req. such that pre_p2p_state would be covered.
++				if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_ING))
++					rtw_p2p_set_pre_state(pwdinfo, rtw_p2p_state(pwdinfo));
++
++				//	Commented by Kurt 20120113
++				//	Get peer_dev_addr here if peer doesn't issue prov_disc frame.
++				if( _rtw_memcmp(pwdinfo->rx_prov_disc_info.peerDevAddr, empty_addr, ETH_ALEN) );
++					_rtw_memcpy(pwdinfo->rx_prov_disc_info.peerDevAddr, GetAddr2Ptr(pframe), ETH_ALEN);
++
++				result = process_p2p_group_negotation_req( pwdinfo, frame_body, len );
++				issue_p2p_GO_response( padapter, GetAddr2Ptr(pframe), frame_body, len, result );
++#ifdef CONFIG_INTEL_WIDI
++				if( (padapter->mlmepriv.widi_state == INTEL_WIDI_STATE_LISTEN) && (padapter->mlmepriv.widi_state != INTEL_WIDI_STATE_WFD_CONNECTION) )
++				{
++					padapter->mlmepriv.widi_state = INTEL_WIDI_STATE_WFD_CONNECTION;
++					_cancel_timer_ex(&(padapter->mlmepriv.listen_timer));
++					intel_widi_wk_cmd(padapter, INTEL_WIDI_LISTEN_STOP_WK, NULL);
++				}
++#endif //CONFIG_INTEL_WIDI
++
++				//	Commented by Albert 20110718
++				//	No matter negotiating or negotiation failure, the driver should set up the restore P2P state timer.
++#ifdef CONFIG_CONCURRENT_MODE
++				//	Commented by Albert 20120107
++				_set_timer( &pwdinfo->restore_p2p_state_timer, 3000 );
++#else // CONFIG_CONCURRENT_MODE
++				_set_timer( &pwdinfo->restore_p2p_state_timer, 5000 );
++#endif // CONFIG_CONCURRENT_MODE
++				break;					
++			}
++			case P2P_GO_NEGO_RESP:
++			{
++				DBG_871X( "[%s] Got GO Nego Resp Frame\n", __FUNCTION__);
++
++				if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_ING))
++				{
++					//	Commented by Albert 20110425
++					//	The restore timer is enabled when issuing the nego request frame of rtw_p2p_connect function.
++					_cancel_timer_ex( &pwdinfo->restore_p2p_state_timer );
++					pwdinfo->nego_req_info.benable = _FALSE;
++					result = process_p2p_group_negotation_resp( pwdinfo, frame_body, len);
++					issue_p2p_GO_confirm( pwdinfo->padapter, GetAddr2Ptr(pframe), result);
++					if ( P2P_STATUS_SUCCESS == result )
++					{
++						if ( rtw_p2p_role(pwdinfo) == P2P_ROLE_CLIENT )
++						{
++							pwdinfo->p2p_info.operation_ch[ 0 ] = pwdinfo->peer_operating_ch;
++							#ifdef P2P_OP_CHECK_SOCIAL_CH
++							pwdinfo->p2p_info.operation_ch[ 1 ] = 1;	//Check whether GO is operating in channel 1;
++							pwdinfo->p2p_info.operation_ch[ 2 ] = 6;	//Check whether GO is operating in channel 6;
++							pwdinfo->p2p_info.operation_ch[ 3 ] = 11;	//Check whether GO is operating in channel 11;
++							#endif //P2P_OP_CHECK_SOCIAL_CH
++							pwdinfo->p2p_info.scan_op_ch_only = 1;
++							_set_timer( &pwdinfo->reset_ch_sitesurvey2, P2P_RESET_SCAN_CH );
++						}
++ 					}
++
++					//	Reset the dialog token for group negotiation frames.
++					pwdinfo->negotiation_dialog_token = 1;
++
++					if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_FAIL))
++					{
++						_set_timer( &pwdinfo->restore_p2p_state_timer, 5000 );
++					}
++				}
++				else
++				{
++					DBG_871X( "[%s] Skipped GO Nego Resp Frame (p2p_state != P2P_STATE_GONEGO_ING)\n", __FUNCTION__);
++				}
++						
++				break;
++			}
++			case P2P_GO_NEGO_CONF:
++			{
++				DBG_871X( "[%s] Got GO Nego Confirm Frame\n", __FUNCTION__);
++				result = process_p2p_group_negotation_confirm( pwdinfo, frame_body, len);
++				if ( P2P_STATUS_SUCCESS == result )
++				{
++					if ( rtw_p2p_role(pwdinfo) == P2P_ROLE_CLIENT )
++					{
++						pwdinfo->p2p_info.operation_ch[ 0 ] = pwdinfo->peer_operating_ch;
++						#ifdef P2P_OP_CHECK_SOCIAL_CH
++						pwdinfo->p2p_info.operation_ch[ 1 ] = 1;	//Check whether GO is operating in channel 1;
++						pwdinfo->p2p_info.operation_ch[ 2 ] = 6;	//Check whether GO is operating in channel 6;
++						pwdinfo->p2p_info.operation_ch[ 3 ] = 11;	//Check whether GO is operating in channel 11;
++						#endif //P2P_OP_CHECK_SOCIAL_CH
++						pwdinfo->p2p_info.scan_op_ch_only = 1;
++						_set_timer( &pwdinfo->reset_ch_sitesurvey2, P2P_RESET_SCAN_CH );
++					}
++ 				}
++				break;
++			}
++			case P2P_INVIT_REQ:
++			{
++				//	Added by Albert 2010/10/05
++				//	Received the P2P Invite Request frame.
++						
++				DBG_871X( "[%s] Got invite request frame!\n", __FUNCTION__ );
++				if ( (p2p_ie=rtw_get_p2p_ie( frame_body + _PUBLIC_ACTION_IE_OFFSET_, len - _PUBLIC_ACTION_IE_OFFSET_, NULL, &p2p_ielen)) )
++				{
++					//	Parse the necessary information from the P2P Invitation Request frame.
++					//	For example: The MAC address of sending this P2P Invitation Request frame.
++					u32	attr_contentlen = 0;
++					u8	status_code = P2P_STATUS_FAIL_INFO_UNAVAILABLE;
++					struct group_id_info group_id;
++					u8	invitation_flag = 0;
++
++					merged_p2p_ielen = rtw_get_p2p_merged_ies_len(frame_body + _PUBLIC_ACTION_IE_OFFSET_, len - _PUBLIC_ACTION_IE_OFFSET_);
++
++					merged_p2pie = rtw_malloc(merged_p2p_ielen);
++					if (merged_p2pie == NULL)
++					{
++						DBG_871X( "[%s] Malloc p2p ie fail\n", __FUNCTION__);
++						goto exit;
++					}
++					_rtw_memset(merged_p2pie, 0x00, merged_p2p_ielen);					
++
++					merged_p2p_ielen = rtw_p2p_merge_ies(frame_body + _PUBLIC_ACTION_IE_OFFSET_, len - _PUBLIC_ACTION_IE_OFFSET_, merged_p2pie);
++
++					rtw_get_p2p_attr_content( merged_p2pie, merged_p2p_ielen, P2P_ATTR_INVITATION_FLAGS, &invitation_flag, &attr_contentlen);
++					if ( attr_contentlen )
++					{
++
++						rtw_get_p2p_attr_content( merged_p2pie, merged_p2p_ielen, P2P_ATTR_GROUP_BSSID, pwdinfo->p2p_peer_interface_addr, &attr_contentlen);
++						//	Commented by Albert 20120510
++						//	Copy to the pwdinfo->p2p_peer_interface_addr.
++						//	So that the WFD UI ( or Sigma ) can get the peer interface address by using the following command.
++						//	#> iwpriv wlan0 p2p_get peer_ifa
++						//	After having the peer interface address, the sigma can find the correct conf file for wpa_supplicant.
++
++						if ( attr_contentlen )
++						{
++							DBG_871X( "[%s] GO's BSSID = %.2X %.2X %.2X %.2X %.2X %.2X\n", __FUNCTION__,
++									pwdinfo->p2p_peer_interface_addr[0], pwdinfo->p2p_peer_interface_addr[1],
++									pwdinfo->p2p_peer_interface_addr[2], pwdinfo->p2p_peer_interface_addr[3],
++									pwdinfo->p2p_peer_interface_addr[4], pwdinfo->p2p_peer_interface_addr[5] );
++						}								
++
++						if ( invitation_flag & P2P_INVITATION_FLAGS_PERSISTENT )
++						{
++							//	Re-invoke the persistent group.
++							
++							_rtw_memset( &group_id, 0x00, sizeof( struct group_id_info ) );
++							rtw_get_p2p_attr_content( merged_p2pie, merged_p2p_ielen, P2P_ATTR_GROUP_ID, ( u8* ) &group_id, &attr_contentlen);
++							if ( attr_contentlen )
++							{
++								if ( _rtw_memcmp( group_id.go_device_addr, myid( &padapter->eeprompriv ), ETH_ALEN ) )
++								{
++									//	The p2p device sending this p2p invitation request wants this Wi-Fi device to be the persistent GO.
++									rtw_p2p_set_state(pwdinfo, P2P_STATE_RECV_INVITE_REQ_GO );
++									rtw_p2p_set_role( pwdinfo, P2P_ROLE_GO );
++									status_code = P2P_STATUS_SUCCESS;
++								}
++								else
++								{
++									//	The p2p device sending this p2p invitation request wants to be the persistent GO.
++									if ( is_matched_in_profilelist( pwdinfo->p2p_peer_interface_addr, &pwdinfo->profileinfo[ 0 ] ) )
++									{
++										u8 operatingch_info[5] = { 0x00 };
++
++										if ( rtw_get_p2p_attr_content(merged_p2pie, merged_p2p_ielen, P2P_ATTR_OPERATING_CH, operatingch_info, &attr_contentlen) )
++										{
++											if( rtw_ch_set_search_ch(padapter->mlmeextpriv.channel_set, (u32)operatingch_info[4] ) >= 0 )
++											{
++												//	The operating channel is acceptable for this device.
++												pwdinfo->rx_invitereq_info.operation_ch[0]= operatingch_info[4];
++												#ifdef P2P_OP_CHECK_SOCIAL_CH
++												pwdinfo->rx_invitereq_info.operation_ch[1]= 1;		//Check whether GO is operating in channel 1;
++												pwdinfo->rx_invitereq_info.operation_ch[2]= 6;		//Check whether GO is operating in channel 6;
++												pwdinfo->rx_invitereq_info.operation_ch[3]= 11;		//Check whether GO is operating in channel 11;
++												#endif //P2P_OP_CHECK_SOCIAL_CH
++												pwdinfo->rx_invitereq_info.scan_op_ch_only = 1;
++												_set_timer( &pwdinfo->reset_ch_sitesurvey, P2P_RESET_SCAN_CH );
++												rtw_p2p_set_state(pwdinfo, P2P_STATE_RECV_INVITE_REQ_MATCH );
++												rtw_p2p_set_role( pwdinfo, P2P_ROLE_CLIENT );
++												status_code = P2P_STATUS_SUCCESS;
++											}
++											else
++											{
++												//	The operating channel isn't supported by this device.
++												rtw_p2p_set_state(pwdinfo, P2P_STATE_RECV_INVITE_REQ_DISMATCH );
++												rtw_p2p_set_role( pwdinfo, P2P_ROLE_DEVICE );
++												status_code = P2P_STATUS_FAIL_NO_COMMON_CH;
++												_set_timer( &pwdinfo->restore_p2p_state_timer, 3000 );
++											}
++										}
++										else
++										{
++											//	Commented by Albert 20121130
++											//	Intel will use the different P2P IE to store the operating channel information
++											//	Workaround for Intel WiDi 3.5
++											rtw_p2p_set_state(pwdinfo, P2P_STATE_RECV_INVITE_REQ_MATCH );
++											rtw_p2p_set_role( pwdinfo, P2P_ROLE_CLIENT );
++											status_code = P2P_STATUS_SUCCESS;
++										}
++									}
++									else
++									{
++										rtw_p2p_set_state(pwdinfo, P2P_STATE_RECV_INVITE_REQ_DISMATCH );
++										#ifdef CONFIG_INTEL_WIDI
++										_rtw_memcpy( pwdinfo->p2p_peer_device_addr, group_id.go_device_addr , ETH_ALEN );
++										rtw_p2p_set_role( pwdinfo, P2P_ROLE_CLIENT );
++										#endif //CONFIG_INTEL_WIDI
++
++										status_code = P2P_STATUS_FAIL_UNKNOWN_P2PGROUP;
++									}
++								}
++							}
++							else
++							{
++								DBG_871X( "[%s] P2P Group ID Attribute NOT FOUND!\n", __FUNCTION__ );
++								status_code = P2P_STATUS_FAIL_INFO_UNAVAILABLE;
++							}									
++						}
++						else
++						{
++							//	Received the invitation to join a P2P group.
++
++							_rtw_memset( &group_id, 0x00, sizeof( struct group_id_info ) );
++							rtw_get_p2p_attr_content( merged_p2pie, merged_p2p_ielen, P2P_ATTR_GROUP_ID, ( u8* ) &group_id, &attr_contentlen);
++							if ( attr_contentlen )
++							{
++								if ( _rtw_memcmp( group_id.go_device_addr, myid( &padapter->eeprompriv ), ETH_ALEN ) )
++								{
++									//	In this case, the GO can't be myself.
++									rtw_p2p_set_state(pwdinfo, P2P_STATE_RECV_INVITE_REQ_DISMATCH );
++									status_code = P2P_STATUS_FAIL_INFO_UNAVAILABLE;
++								}
++								else
++								{
++									//	The p2p device sending this p2p invitation request wants to join an existing P2P group
++									//	Commented by Albert 2012/06/28
++									//	In this case, this Wi-Fi device should use the iwpriv command to get the peer device address.
++									//	The peer device address should be the destination address for the provisioning discovery request.
++									//	Then, this Wi-Fi device should use the iwpriv command to get the peer interface address.
++									//	The peer interface address should be the address for WPS mac address
++									_rtw_memcpy( pwdinfo->p2p_peer_device_addr, group_id.go_device_addr , ETH_ALEN );											
++									rtw_p2p_set_role( pwdinfo, P2P_ROLE_CLIENT );
++									rtw_p2p_set_state(pwdinfo, P2P_STATE_RECV_INVITE_REQ_JOIN );
++									status_code = P2P_STATUS_SUCCESS;
++								}
++							}
++							else
++							{
++								DBG_871X( "[%s] P2P Group ID Attribute NOT FOUND!\n", __FUNCTION__ );
++								status_code = P2P_STATUS_FAIL_INFO_UNAVAILABLE;
++							}
++						}
++					}
++					else
++					{
++						DBG_871X( "[%s] P2P Invitation Flags Attribute NOT FOUND!\n", __FUNCTION__ );
++						status_code = P2P_STATUS_FAIL_INFO_UNAVAILABLE;
++					}							
++
++					DBG_871X( "[%s] status_code = %d\n", __FUNCTION__, status_code );
++
++					pwdinfo->inviteresp_info.token = frame_body[ 7 ];
++					issue_p2p_invitation_response( padapter, GetAddr2Ptr(pframe), pwdinfo->inviteresp_info.token, status_code );
++					_set_timer( &pwdinfo->restore_p2p_state_timer, 3000 );
++				}
++#ifdef CONFIG_INTEL_WIDI
++				if( (padapter->mlmepriv.widi_state == INTEL_WIDI_STATE_LISTEN) && (padapter->mlmepriv.widi_state != INTEL_WIDI_STATE_WFD_CONNECTION) )
++				{
++					padapter->mlmepriv.widi_state = INTEL_WIDI_STATE_WFD_CONNECTION;
++					_cancel_timer_ex(&(padapter->mlmepriv.listen_timer));
++					intel_widi_wk_cmd(padapter, INTEL_WIDI_LISTEN_STOP_WK, NULL);
++				}
++#endif //CONFIG_INTEL_WIDI
++				break;
++			}
++			case P2P_INVIT_RESP:
++			{
++				u8	attr_content = 0x00;
++				u32	attr_contentlen = 0;
++				
++				DBG_871X( "[%s] Got invite response frame!\n", __FUNCTION__ );
++				_cancel_timer_ex( &pwdinfo->restore_p2p_state_timer );
++				if ( (p2p_ie=rtw_get_p2p_ie( frame_body + _PUBLIC_ACTION_IE_OFFSET_, len - _PUBLIC_ACTION_IE_OFFSET_, NULL, &p2p_ielen)) )
++				{
++					rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_STATUS, &attr_content, &attr_contentlen);
++									
++					if ( attr_contentlen == 1 )
++					{
++						DBG_871X( "[%s] Status = %d\n", __FUNCTION__, attr_content );
++						pwdinfo->invitereq_info.benable = _FALSE;
++
++						if ( attr_content == P2P_STATUS_SUCCESS )
++						{
++							if ( _rtw_memcmp( pwdinfo->invitereq_info.go_bssid, myid( &padapter->eeprompriv ), ETH_ALEN ))
++							{
++								rtw_p2p_set_role(pwdinfo, P2P_ROLE_GO );
++							}
++							else
++							{
++								rtw_p2p_set_role(pwdinfo, P2P_ROLE_CLIENT);
++							}
++							rtw_p2p_set_state( pwdinfo, P2P_STATE_RX_INVITE_RESP_OK );
++						}
++						else
++						{
++							rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE);
++							rtw_p2p_set_state( pwdinfo, P2P_STATE_RX_INVITE_RESP_FAIL );
++						}
++					}
++					else
++					{
++						rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE);
++						rtw_p2p_set_state( pwdinfo, P2P_STATE_RX_INVITE_RESP_FAIL );
++					}
++				}
++				else
++				{
++					rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE);
++					rtw_p2p_set_state( pwdinfo, P2P_STATE_RX_INVITE_RESP_FAIL );
++				}
++
++				if ( rtw_p2p_chk_state( pwdinfo, P2P_STATE_RX_INVITE_RESP_FAIL ) )
++				{
++					_set_timer( &pwdinfo->restore_p2p_state_timer, 5000 );
++				}
++				break;
++			}
++			case P2P_DEVDISC_REQ:
++
++				process_p2p_devdisc_req(pwdinfo, pframe, len);
++
++				break;
++
++			case P2P_DEVDISC_RESP:
++
++				process_p2p_devdisc_resp(pwdinfo, pframe, len);
++
++				break;
++
++			case P2P_PROVISION_DISC_REQ:
++				DBG_871X( "[%s] Got Provisioning Discovery Request Frame\n", __FUNCTION__ );
++				process_p2p_provdisc_req(pwdinfo, pframe, len);
++				_rtw_memcpy(pwdinfo->rx_prov_disc_info.peerDevAddr, GetAddr2Ptr(pframe), ETH_ALEN);
++
++				//20110902 Kurt
++				//Add the following statement to avoid receiving duplicate prov disc req. such that pre_p2p_state would be covered.
++				if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_RX_PROVISION_DIS_REQ))
++					rtw_p2p_set_pre_state(pwdinfo, rtw_p2p_state(pwdinfo));
++				
++				rtw_p2p_set_state(pwdinfo, P2P_STATE_RX_PROVISION_DIS_REQ);
++				_set_timer( &pwdinfo->restore_p2p_state_timer, P2P_PROVISION_TIMEOUT );
++#ifdef CONFIG_INTEL_WIDI
++				if( (padapter->mlmepriv.widi_state == INTEL_WIDI_STATE_LISTEN) && (padapter->mlmepriv.widi_state != INTEL_WIDI_STATE_WFD_CONNECTION) )
++				{
++					padapter->mlmepriv.widi_state = INTEL_WIDI_STATE_WFD_CONNECTION;
++					_cancel_timer_ex(&(padapter->mlmepriv.listen_timer));
++					intel_widi_wk_cmd(padapter, INTEL_WIDI_LISTEN_STOP_WK, NULL);
++				}
++#endif //CONFIG_INTEL_WIDI
++				break;
++
++			case P2P_PROVISION_DISC_RESP:
++				//	Commented by Albert 20110707
++				//	Should we check the pwdinfo->tx_prov_disc_info.bsent flag here??
++				DBG_871X( "[%s] Got Provisioning Discovery Response Frame\n", __FUNCTION__ );
++				//	Commented by Albert 20110426
++				//	The restore timer is enabled when issuing the provisioing request frame in rtw_p2p_prov_disc function.
++				_cancel_timer_ex( &pwdinfo->restore_p2p_state_timer );
++				rtw_p2p_set_state(pwdinfo, P2P_STATE_RX_PROVISION_DIS_RSP);
++				process_p2p_provdisc_resp(pwdinfo, pframe);
++				_set_timer( &pwdinfo->restore_p2p_state_timer, P2P_PROVISION_TIMEOUT );
++				break;
++
++		}
++	}
++#endif //CONFIG_P2P
++
++exit:
++
++	if(merged_p2pie)
++	{
++		rtw_mfree(merged_p2pie, merged_p2p_ielen);
++	}
++
++	return _SUCCESS;
++}
++
++unsigned int on_action_public_vendor(union recv_frame *precv_frame)
++{
++	unsigned int ret = _FAIL;
++	u8 *pframe = precv_frame->u.hdr.rx_data;
++	uint frame_len = precv_frame->u.hdr.len;
++	u8 *frame_body = pframe + sizeof(struct rtw_ieee80211_hdr_3addr);
++
++	if (_rtw_memcmp(frame_body + 2, P2P_OUI, 4) == _TRUE) {
++		ret = on_action_public_p2p(precv_frame);
++	}
++
++	return ret;
++}
++
++unsigned int on_action_public_default(union recv_frame *precv_frame, u8 action)
++{
++	unsigned int ret = _FAIL;
++	u8 *pframe = precv_frame->u.hdr.rx_data;
++	uint frame_len = precv_frame->u.hdr.len;
++	u8 *frame_body = pframe + sizeof(struct rtw_ieee80211_hdr_3addr);
++	u8 token;
++	_adapter *adapter = precv_frame->u.hdr.adapter;
++	int cnt = 0;
++	char msg[64];
++
++	token = frame_body[2];
++
++	if (rtw_action_public_decache(precv_frame, token) == _FAIL)
++		goto exit;
++
++	#ifdef CONFIG_IOCTL_CFG80211
++	cnt += sprintf((msg+cnt), "%s(token:%u)", action_public_str(action), token);
++	rtw_cfg80211_rx_action(adapter, pframe, frame_len, msg);
++	#endif
++
++	ret = _SUCCESS;
++	
++exit:
++	return ret;
++}
++
++unsigned int on_action_public(_adapter *padapter, union recv_frame *precv_frame)
++{
++	unsigned int ret = _FAIL;
++	u8 *pframe = precv_frame->u.hdr.rx_data;
++	uint frame_len = precv_frame->u.hdr.len;
++	u8 *frame_body = pframe + sizeof(struct rtw_ieee80211_hdr_3addr);
++	u8 category, action;
++
++	/* check RA matches or not */
++	if (!_rtw_memcmp(myid(&(padapter->eeprompriv)), GetAddr1Ptr(pframe), ETH_ALEN))
++		goto exit;
++
++	category = frame_body[0];
++	if(category != RTW_WLAN_CATEGORY_PUBLIC)
++		goto exit;
++
++	action = frame_body[1];
++	switch (action) {
++	case ACT_PUBLIC_VENDOR:
++		ret = on_action_public_vendor(precv_frame);
++		break;
++	default:
++		ret = on_action_public_default(precv_frame, action);
++		break;
++	}
++
++exit:
++	return ret;
++}
++
++unsigned int OnAction_ht(_adapter *padapter, union recv_frame *precv_frame)
++{
++	return _SUCCESS;
++}
++
++#ifdef CONFIG_IEEE80211W
++unsigned int OnAction_sa_query(_adapter *padapter, union recv_frame *precv_frame)
++{
++	u8 *pframe = precv_frame->u.hdr.rx_data;
++	struct rx_pkt_attrib *pattrib = &precv_frame->u.hdr.attrib;
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	unsigned short tid;
++	//Baron
++	
++	DBG_871X("OnAction_sa_query\n");
++	
++	switch (pframe[WLAN_HDR_A3_LEN+1])
++	{
++		case 0: //SA Query req
++			_rtw_memcpy(&tid, &pframe[WLAN_HDR_A3_LEN+2], sizeof(unsigned short));
++			DBG_871X("OnAction_sa_query request,action=%d, tid=%04x\n", pframe[WLAN_HDR_A3_LEN+1], tid);
++			issue_action_SA_Query(padapter, GetAddr2Ptr(pframe), 1, tid);
++			break;
++
++		case 1: //SA Query rsp
++			_cancel_timer_ex(&pmlmeext->sa_query_timer);
++			DBG_871X("OnAction_sa_query response,action=%d, tid=%04x, cancel timer\n", pframe[WLAN_HDR_A3_LEN+1], pframe[WLAN_HDR_A3_LEN+2]);
++			break;
++		default:
++			break;
++	}
++	if(0)
++	{
++		int pp;
++		printk("pattrib->pktlen = %d =>", pattrib->pkt_len);
++		for(pp=0;pp< pattrib->pkt_len; pp++)
++			printk(" %02x ", pframe[pp]);
++		printk("\n");
++	}	
++	
++	return _SUCCESS;
++}
++#endif //CONFIG_IEEE80211W
++
++unsigned int OnAction_wmm(_adapter *padapter, union recv_frame *precv_frame)
++{
++	return _SUCCESS;
++}
++
++unsigned int OnAction_p2p(_adapter *padapter, union recv_frame *precv_frame)
++{
++#ifdef CONFIG_P2P
++	u8 *frame_body;
++	u8 category, OUI_Subtype, dialogToken=0;
++	u8 *pframe = precv_frame->u.hdr.rx_data;
++	uint len = precv_frame->u.hdr.len;
++	struct	wifidirect_info	*pwdinfo = &( padapter->wdinfo );
++	
++
++	DBG_871X("%s\n", __FUNCTION__);
++	
++	//check RA matches or not
++	if (!_rtw_memcmp(myid(&(padapter->eeprompriv)), GetAddr1Ptr(pframe), ETH_ALEN))//for if1, sta/ap mode
++		return _SUCCESS;
++
++	frame_body = (unsigned char *)(pframe + sizeof(struct rtw_ieee80211_hdr_3addr));
++
++	category = frame_body[0];
++	if(category != RTW_WLAN_CATEGORY_P2P)
++		return _SUCCESS;
++
++	if ( cpu_to_be32( *( ( u32* ) ( frame_body + 1 ) ) ) != P2POUI )
++		return _SUCCESS;
++
++#ifdef CONFIG_IOCTL_CFG80211
++	if(wdev_to_priv(padapter->rtw_wdev)->p2p_enabled && pwdinfo->driver_interface == DRIVER_CFG80211 )
++	{
++		rtw_cfg80211_rx_action_p2p(padapter, pframe, len);
++		return _SUCCESS;
++	}
++	else
++#endif //CONFIG_IOCTL_CFG80211
++	{
++		len -= sizeof(struct rtw_ieee80211_hdr_3addr);
++		OUI_Subtype = frame_body[5];
++		dialogToken = frame_body[6];
++
++		switch(OUI_Subtype)
++		{
++			case P2P_NOTICE_OF_ABSENCE:
++				
++				break;
++				
++			case P2P_PRESENCE_REQUEST:
++
++				process_p2p_presence_req(pwdinfo, pframe, len);			
++				
++				break;
++				
++			case P2P_PRESENCE_RESPONSE:
++				
++				break;
++				
++			case P2P_GO_DISC_REQUEST:
++				
++				break;
++				
++			default:
++				break;
++				
++		}
++	}
++#endif //CONFIG_P2P
++
++	return _SUCCESS;
++
++}
++
++unsigned int OnAction(_adapter *padapter, union recv_frame *precv_frame)
++{
++	int i;
++	unsigned char	category;
++	struct action_handler *ptable;
++	unsigned char	*frame_body;
++	u8 *pframe = precv_frame->u.hdr.rx_data; 
++
++	frame_body = (unsigned char *)(pframe + sizeof(struct rtw_ieee80211_hdr_3addr));
++	
++	category = frame_body[0];
++	
++	for(i = 0; i < sizeof(OnAction_tbl)/sizeof(struct action_handler); i++)	
++	{
++		ptable = &OnAction_tbl[i];
++		
++		if(category == ptable->num)
++			ptable->func(padapter, precv_frame);
++	
++	}
++
++	return _SUCCESS;
++
++}
++
++unsigned int DoReserved(_adapter *padapter, union recv_frame *precv_frame)
++{
++
++	//DBG_871X("rcvd mgt frame(%x, %x)\n", (GetFrameSubType(pframe) >> 4), *(unsigned int *)GetAddr1Ptr(pframe));
++	return _SUCCESS;
++}
++
++struct xmit_frame *_alloc_mgtxmitframe(struct xmit_priv *pxmitpriv, bool once)
++{
++	struct xmit_frame *pmgntframe;
++	struct xmit_buf *pxmitbuf;
++
++	if (once)
++		pmgntframe = rtw_alloc_xmitframe_once(pxmitpriv);
++	else
++		pmgntframe = rtw_alloc_xmitframe_ext(pxmitpriv);
++
++	if (pmgntframe == NULL) {
++		DBG_871X(FUNC_ADPT_FMT" alloc xmitframe fail, once:%d\n", FUNC_ADPT_ARG(pxmitpriv->adapter), once);
++		goto exit;
++	}
++
++	if ((pxmitbuf = rtw_alloc_xmitbuf_ext(pxmitpriv)) == NULL) {
++		DBG_871X(FUNC_ADPT_FMT" alloc xmitbuf fail\n", FUNC_ADPT_ARG(pxmitpriv->adapter));
++		rtw_free_xmitframe(pxmitpriv, pmgntframe);
++		pmgntframe = NULL;
++		goto exit;
++	}
++
++	pmgntframe->frame_tag = MGNT_FRAMETAG;
++	pmgntframe->pxmitbuf = pxmitbuf;
++	pmgntframe->buf_addr = pxmitbuf->pbuf;
++	pxmitbuf->priv_data = pmgntframe;
++
++exit:
++	return pmgntframe;
++
++}
++
++inline struct xmit_frame *alloc_mgtxmitframe(struct xmit_priv *pxmitpriv)
++{
++	return _alloc_mgtxmitframe(pxmitpriv, _FALSE);
++}
++
++inline struct xmit_frame *alloc_mgtxmitframe_once(struct xmit_priv *pxmitpriv)
++{
++	return _alloc_mgtxmitframe(pxmitpriv, _TRUE);
++}
++
++
++/****************************************************************************
++
++Following are some TX fuctions for WiFi MLME
++
++*****************************************************************************/
++
++void update_mgnt_tx_rate(_adapter *padapter, u8 rate)
++{
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++
++	pmlmeext->tx_rate = rate;
++
++	//DBG_871X("%s(): rate = %x\n",__FUNCTION__, rate);
++}
++
++void update_mgntframe_attrib(_adapter *padapter, struct pkt_attrib *pattrib)
++{
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++
++	_rtw_memset((u8 *)(pattrib), 0, sizeof(struct pkt_attrib));
++
++	pattrib->hdrlen = 24;
++	pattrib->nr_frags = 1;
++	pattrib->priority = 7;
++	pattrib->mac_id = 0;
++	pattrib->qsel = 0x12;
++
++	pattrib->pktlen = 0;
++
++	if(pmlmeext->cur_wireless_mode & WIRELESS_11B)
++		pattrib->raid = 6;//b mode
++	else
++		pattrib->raid = 5;//a/g mode
++
++	pattrib->encrypt = _NO_PRIVACY_;
++	pattrib->bswenc = _FALSE;	
++
++	pattrib->qos_en = _FALSE;
++	pattrib->ht_en = _FALSE;
++	pattrib->bwmode = HT_CHANNEL_WIDTH_20;
++	pattrib->ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++	pattrib->sgi = _FALSE;
++
++	pattrib->seqnum = pmlmeext->mgnt_seq;
++
++	pattrib->retry_ctrl = _TRUE;
++
++}
++
++void dump_mgntframe(_adapter *padapter, struct xmit_frame *pmgntframe)
++{
++	if(padapter->bSurpriseRemoved == _TRUE ||
++		padapter->bDriverStopped == _TRUE)
++	{
++		rtw_free_xmitbuf(&padapter->xmitpriv, pmgntframe->pxmitbuf);
++		rtw_free_xmitframe(&padapter->xmitpriv, pmgntframe);
++		return;
++	}
++
++	rtw_hal_mgnt_xmit(padapter, pmgntframe);
++}
++
++s32 dump_mgntframe_and_wait(_adapter *padapter, struct xmit_frame *pmgntframe, int timeout_ms)
++{
++	s32 ret = _FAIL;
++	_irqL irqL;
++	struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
++	struct xmit_buf *pxmitbuf = pmgntframe->pxmitbuf;
++	struct submit_ctx sctx;
++
++	if(padapter->bSurpriseRemoved == _TRUE ||
++		padapter->bDriverStopped == _TRUE)
++	{
++		rtw_free_xmitbuf(&padapter->xmitpriv, pmgntframe->pxmitbuf);
++		rtw_free_xmitframe(&padapter->xmitpriv, pmgntframe);
++		return ret;
++	}
++
++	rtw_sctx_init(&sctx, timeout_ms);
++	pxmitbuf->sctx = &sctx;
++
++	ret = rtw_hal_mgnt_xmit(padapter, pmgntframe);
++
++	if (ret == _SUCCESS)
++		ret = rtw_sctx_wait(&sctx);
++
++	_enter_critical(&pxmitpriv->lock_sctx, &irqL);
++	pxmitbuf->sctx = NULL;
++	_exit_critical(&pxmitpriv->lock_sctx, &irqL);
++
++	 return ret;
++}
++
++s32 dump_mgntframe_and_wait_ack(_adapter *padapter, struct xmit_frame *pmgntframe)
++{
++#ifdef CONFIG_XMIT_ACK
++	s32 ret = _FAIL;
++	u32 timeout_ms = 500;//  500ms
++	struct xmit_priv	*pxmitpriv = &padapter->xmitpriv;
++	#ifdef CONFIG_CONCURRENT_MODE
++	if (padapter->pbuddy_adapter && !padapter->isprimary)
++		pxmitpriv = &(padapter->pbuddy_adapter->xmitpriv);
++	#endif
++
++	if(padapter->bSurpriseRemoved == _TRUE ||
++		padapter->bDriverStopped == _TRUE)
++	{
++		rtw_free_xmitbuf(&padapter->xmitpriv, pmgntframe->pxmitbuf);
++		rtw_free_xmitframe(&padapter->xmitpriv, pmgntframe);
++		return -1;
++	}
++
++	_enter_critical_mutex(&pxmitpriv->ack_tx_mutex, NULL);
++	pxmitpriv->ack_tx = _TRUE;
++
++	pmgntframe->ack_report = 1;
++	if (rtw_hal_mgnt_xmit(padapter, pmgntframe) == _SUCCESS) {
++		ret = rtw_ack_tx_wait(pxmitpriv, timeout_ms);
++	}
++
++	pxmitpriv->ack_tx = _FALSE;
++	_exit_critical_mutex(&pxmitpriv->ack_tx_mutex, NULL);
++
++	 return ret;
++#else //!CONFIG_XMIT_ACK
++	dump_mgntframe(padapter, pmgntframe);
++	rtw_msleep_os(50);
++	return _SUCCESS;
++#endif //!CONFIG_XMIT_ACK	 
++}
++
++int update_hidden_ssid(u8 *ies, u32 ies_len, u8 hidden_ssid_mode)
++{
++	u8 *ssid_ie;
++	sint ssid_len_ori;
++	int len_diff = 0;
++	
++	ssid_ie = rtw_get_ie(ies,  WLAN_EID_SSID, &ssid_len_ori, ies_len);
++
++	//DBG_871X("%s hidden_ssid_mode:%u, ssid_ie:%p, ssid_len_ori:%d\n", __FUNCTION__, hidden_ssid_mode, ssid_ie, ssid_len_ori);
++	
++	if(ssid_ie && ssid_len_ori>0)
++	{
++		switch(hidden_ssid_mode)
++		{
++			case 1:
++			{
++				u8 *next_ie = ssid_ie + 2 + ssid_len_ori;
++				u32 remain_len = 0;
++				
++				remain_len = ies_len -(next_ie-ies);
++				
++				ssid_ie[1] = 0;				
++				_rtw_memcpy(ssid_ie+2, next_ie, remain_len);
++				len_diff -= ssid_len_ori;
++				
++				break;
++			}		
++			case 2:
++				_rtw_memset(&ssid_ie[2], 0, ssid_len_ori);
++				break;
++			default:
++				break;
++		}
++	}
++
++	return len_diff;
++}
++
++void issue_beacon(_adapter *padapter)
++{
++	struct xmit_frame	*pmgntframe;
++	struct pkt_attrib	*pattrib;
++	unsigned char	*pframe;
++	struct rtw_ieee80211_hdr *pwlanhdr;
++	unsigned short *fctrl;
++	unsigned int	rate_len;
++	struct xmit_priv	*pxmitpriv = &(padapter->xmitpriv);
++#if defined (CONFIG_AP_MODE) && defined (CONFIG_NATIVEAP_MLME)
++	_irqL irqL;
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++#endif //#if defined (CONFIG_AP_MODE) && defined (CONFIG_NATIVEAP_MLME)
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	WLAN_BSSID_EX 		*cur_network = &(pmlmeinfo->network);
++	u8	bc_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
++#ifdef CONFIG_P2P
++	struct wifidirect_info	*pwdinfo = &(padapter->wdinfo);
++#endif //CONFIG_P2P
++
++
++	//DBG_871X("%s\n", __FUNCTION__);
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		DBG_871X("%s, alloc mgnt frame fail\n", __FUNCTION__);
++		return;
++	}
++#if defined (CONFIG_AP_MODE) && defined (CONFIG_NATIVEAP_MLME)
++	_enter_critical_bh(&pmlmepriv->bcn_update_lock, &irqL);
++#endif //#if defined (CONFIG_AP_MODE) && defined (CONFIG_NATIVEAP_MLME)
++
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);
++	pattrib->qsel = 0x10;
++	
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++		
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;	
++	
++	
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++	
++	_rtw_memcpy(pwlanhdr->addr1, bc_addr, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr3, get_my_bssid(cur_network), ETH_ALEN);
++
++	SetSeqNum(pwlanhdr, 0/*pmlmeext->mgnt_seq*/);
++	//pmlmeext->mgnt_seq++;
++	SetFrameSubType(pframe, WIFI_BEACON);
++	
++	pframe += sizeof(struct rtw_ieee80211_hdr_3addr);	
++	pattrib->pktlen = sizeof (struct rtw_ieee80211_hdr_3addr);
++	
++	if( (pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE)
++	{
++		//DBG_871X("ie len=%d\n", cur_network->IELength);
++#ifdef CONFIG_P2P
++		// for P2P : Primary Device Type & Device Name
++		u32 wpsielen=0, insert_len=0;
++		u8 *wpsie=NULL;		
++		wpsie = rtw_get_wps_ie(cur_network->IEs+_FIXED_IE_LENGTH_, cur_network->IELength-_FIXED_IE_LENGTH_, NULL, &wpsielen);
++		
++		if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO) && wpsie && wpsielen>0)
++		{
++			uint wps_offset, remainder_ielen;
++			u8 *premainder_ie, *pframe_wscie;
++	
++			wps_offset = (uint)(wpsie - cur_network->IEs);
++
++			premainder_ie = wpsie + wpsielen;
++
++			remainder_ielen = cur_network->IELength - wps_offset - wpsielen;
++
++#ifdef CONFIG_IOCTL_CFG80211
++			if(wdev_to_priv(padapter->rtw_wdev)->p2p_enabled && pwdinfo->driver_interface == DRIVER_CFG80211 )
++			{
++				if(pmlmepriv->wps_beacon_ie && pmlmepriv->wps_beacon_ie_len>0)
++				{
++					_rtw_memcpy(pframe, cur_network->IEs, wps_offset);
++					pframe += wps_offset;
++					pattrib->pktlen += wps_offset;
++
++					_rtw_memcpy(pframe, pmlmepriv->wps_beacon_ie, pmlmepriv->wps_beacon_ie_len);
++					pframe += pmlmepriv->wps_beacon_ie_len;
++					pattrib->pktlen += pmlmepriv->wps_beacon_ie_len;
++
++					//copy remainder_ie to pframe
++					_rtw_memcpy(pframe, premainder_ie, remainder_ielen);
++					pframe += remainder_ielen;		
++					pattrib->pktlen += remainder_ielen;
++				}
++				else
++				{
++					_rtw_memcpy(pframe, cur_network->IEs, cur_network->IELength);
++					pframe += cur_network->IELength;
++					pattrib->pktlen += cur_network->IELength;
++				}
++			}
++			else
++#endif //CONFIG_IOCTL_CFG80211
++			{
++				pframe_wscie = pframe + wps_offset;
++				_rtw_memcpy(pframe, cur_network->IEs, wps_offset+wpsielen);			
++				pframe += (wps_offset + wpsielen);		
++				pattrib->pktlen += (wps_offset + wpsielen);
++
++				//now pframe is end of wsc ie, insert Primary Device Type & Device Name
++				//	Primary Device Type
++				//	Type:
++				*(u16*) ( pframe + insert_len) = cpu_to_be16( WPS_ATTR_PRIMARY_DEV_TYPE );
++				insert_len += 2;
++				
++				//	Length:
++				*(u16*) ( pframe + insert_len ) = cpu_to_be16( 0x0008 );
++				insert_len += 2;
++				
++				//	Value:
++				//	Category ID
++				*(u16*) ( pframe + insert_len ) = cpu_to_be16( WPS_PDT_CID_MULIT_MEDIA );
++				insert_len += 2;
++
++				//	OUI
++				*(u32*) ( pframe + insert_len ) = cpu_to_be32( WPSOUI );
++				insert_len += 4;
++
++				//	Sub Category ID
++				*(u16*) ( pframe + insert_len ) = cpu_to_be16( WPS_PDT_SCID_MEDIA_SERVER );
++				insert_len += 2;
++
++
++				//	Device Name
++				//	Type:
++				*(u16*) ( pframe + insert_len ) = cpu_to_be16( WPS_ATTR_DEVICE_NAME );
++				insert_len += 2;
++
++				//	Length:
++				*(u16*) ( pframe + insert_len ) = cpu_to_be16( pwdinfo->device_name_len );
++				insert_len += 2;
++
++				//	Value:
++				_rtw_memcpy( pframe + insert_len, pwdinfo->device_name, pwdinfo->device_name_len );
++				insert_len += pwdinfo->device_name_len;
++
++
++				//update wsc ie length
++				*(pframe_wscie+1) = (wpsielen -2) + insert_len;
++
++				//pframe move to end
++				pframe+=insert_len;
++				pattrib->pktlen += insert_len;
++
++				//copy remainder_ie to pframe
++				_rtw_memcpy(pframe, premainder_ie, remainder_ielen);
++				pframe += remainder_ielen;		
++				pattrib->pktlen += remainder_ielen;
++			}
++		}
++		else
++#endif //CONFIG_P2P
++		{
++			int len_diff;
++			_rtw_memcpy(pframe, cur_network->IEs, cur_network->IELength);
++			len_diff = update_hidden_ssid(
++				pframe+_BEACON_IE_OFFSET_
++				, cur_network->IELength-_BEACON_IE_OFFSET_
++				, pmlmeinfo->hidden_ssid_mode
++			);
++			pframe += (cur_network->IELength+len_diff);
++			pattrib->pktlen += (cur_network->IELength+len_diff);
++		}
++
++		{
++			u8 *wps_ie;
++			uint wps_ielen;
++			u8 sr = 0;
++			wps_ie = rtw_get_wps_ie(pmgntframe->buf_addr+TXDESC_OFFSET+sizeof (struct rtw_ieee80211_hdr_3addr)+_BEACON_IE_OFFSET_,
++				pattrib->pktlen-sizeof (struct rtw_ieee80211_hdr_3addr)-_BEACON_IE_OFFSET_, NULL, &wps_ielen);
++			if (wps_ie && wps_ielen>0) {
++				rtw_get_wps_attr_content(wps_ie,  wps_ielen, WPS_ATTR_SELECTED_REGISTRAR, (u8*)(&sr), NULL);
++			}
++			if (sr != 0)
++				set_fwstate(pmlmepriv, WIFI_UNDER_WPS);
++			else
++				_clr_fwstate_(pmlmepriv, WIFI_UNDER_WPS);
++		}
++
++#ifdef CONFIG_P2P
++		if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO))
++		{
++			u32 len;
++#ifdef CONFIG_IOCTL_CFG80211
++			if(wdev_to_priv(padapter->rtw_wdev)->p2p_enabled && pwdinfo->driver_interface == DRIVER_CFG80211 )
++			{
++				len = pmlmepriv->p2p_beacon_ie_len;
++				if(pmlmepriv->p2p_beacon_ie && len>0)				
++					_rtw_memcpy(pframe, pmlmepriv->p2p_beacon_ie, len);
++			}
++			else
++#endif //CONFIG_IOCTL_CFG80211
++			{
++				len = build_beacon_p2p_ie(pwdinfo, pframe);
++			}
++
++			pframe += len;
++			pattrib->pktlen += len;
++#ifdef CONFIG_WFD
++#ifdef CONFIG_IOCTL_CFG80211
++			if(_TRUE == pwdinfo->wfd_info->wfd_enable)
++#endif //CONFIG_IOCTL_CFG80211
++			{
++				len = build_beacon_wfd_ie( pwdinfo, pframe );
++			}
++#ifdef CONFIG_IOCTL_CFG80211
++			else
++			{	
++				len = 0;
++				if(pmlmepriv->wfd_beacon_ie && pmlmepriv->wfd_beacon_ie_len>0)
++				{
++					len = pmlmepriv->wfd_beacon_ie_len;
++					_rtw_memcpy(pframe, pmlmepriv->wfd_beacon_ie, len);	
++				}
++			}
++#endif //CONFIG_IOCTL_CFG80211
++			pframe += len;
++			pattrib->pktlen += len;
++#endif //CONFIG_WFD
++		}
++#endif //CONFIG_P2P
++
++		goto _issue_bcn;
++
++	}
++
++	//below for ad-hoc mode
++
++	//timestamp will be inserted by hardware
++	pframe += 8;
++	pattrib->pktlen += 8;
++
++	// beacon interval: 2 bytes
++
++	_rtw_memcpy(pframe, (unsigned char *)(rtw_get_beacon_interval_from_ie(cur_network->IEs)), 2); 
++
++	pframe += 2;
++	pattrib->pktlen += 2;
++
++	// capability info: 2 bytes
++
++	_rtw_memcpy(pframe, (unsigned char *)(rtw_get_capability_from_ie(cur_network->IEs)), 2);
++
++	pframe += 2;
++	pattrib->pktlen += 2;
++
++	// SSID
++	pframe = rtw_set_ie(pframe, _SSID_IE_, cur_network->Ssid.SsidLength, cur_network->Ssid.Ssid, &pattrib->pktlen);
++
++	// supported rates...
++	rate_len = rtw_get_rateset_len(cur_network->SupportedRates);
++	pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_, ((rate_len > 8)? 8: rate_len), cur_network->SupportedRates, &pattrib->pktlen);
++
++	// DS parameter set
++	pframe = rtw_set_ie(pframe, _DSSET_IE_, 1, (unsigned char *)&(cur_network->Configuration.DSConfig), &pattrib->pktlen);
++
++	//if( (pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE)
++	{
++		u8 erpinfo=0;
++		u32 ATIMWindow;
++		// IBSS Parameter Set...
++		//ATIMWindow = cur->Configuration.ATIMWindow;
++		ATIMWindow = 0;
++		pframe = rtw_set_ie(pframe, _IBSS_PARA_IE_, 2, (unsigned char *)(&ATIMWindow), &pattrib->pktlen);
++
++		//ERP IE
++		pframe = rtw_set_ie(pframe, _ERPINFO_IE_, 1, &erpinfo, &pattrib->pktlen);
++	}	
++
++
++	// EXTERNDED SUPPORTED RATE
++	if (rate_len > 8)
++	{
++		pframe = rtw_set_ie(pframe, _EXT_SUPPORTEDRATES_IE_, (rate_len - 8), (cur_network->SupportedRates + 8), &pattrib->pktlen);
++	}
++
++
++	//todo:HT for adhoc
++
++_issue_bcn:
++
++#if defined (CONFIG_AP_MODE) && defined (CONFIG_NATIVEAP_MLME)
++	pmlmepriv->update_bcn = _FALSE;
++	
++	_exit_critical_bh(&pmlmepriv->bcn_update_lock, &irqL);	
++#endif //#if defined (CONFIG_AP_MODE) && defined (CONFIG_NATIVEAP_MLME)
++
++	if ((pattrib->pktlen + TXDESC_SIZE) > 512)
++	{
++		DBG_871X("beacon frame too large\n");
++		return;
++	}
++	
++	pattrib->last_txcmdsz = pattrib->pktlen;
++
++	//DBG_871X("issue bcn_sz=%d\n", pattrib->last_txcmdsz);
++
++	dump_mgntframe(padapter, pmgntframe);
++
++}
++
++void issue_probersp(_adapter *padapter, unsigned char *da, u8 is_valid_p2p_probereq)
++{
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	unsigned char					*pframe;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	unsigned short				*fctrl;	
++	unsigned char					*mac, *bssid;
++	struct xmit_priv	*pxmitpriv = &(padapter->xmitpriv);
++#if defined (CONFIG_AP_MODE) && defined (CONFIG_NATIVEAP_MLME)
++	u8 *pwps_ie;
++	uint wps_ielen;
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++#endif //#if defined (CONFIG_AP_MODE) && defined (CONFIG_NATIVEAP_MLME)
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	WLAN_BSSID_EX 		*cur_network = &(pmlmeinfo->network);
++	unsigned int	rate_len;
++#ifdef CONFIG_P2P
++	struct wifidirect_info	*pwdinfo = &(padapter->wdinfo);
++#ifdef CONFIG_WFD
++	u32					wfdielen = 0;
++#endif //CONFIG_WFD
++#endif //CONFIG_P2P
++
++	//DBG_871X("%s\n", __FUNCTION__);
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		DBG_871X("%s, alloc mgnt frame fail\n", __FUNCTION__);
++		return;
++	}
++
++
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);	
++	
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++		
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;	
++	
++	mac = myid(&(padapter->eeprompriv));
++	bssid = cur_network->MacAddress;
++	
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++	_rtw_memcpy(pwlanhdr->addr1, da, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr2, mac, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr3, bssid, ETH_ALEN);
++
++	SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq);
++	pmlmeext->mgnt_seq++;
++	SetFrameSubType(fctrl, WIFI_PROBERSP);
++	
++	pattrib->hdrlen = sizeof(struct rtw_ieee80211_hdr_3addr);
++	pattrib->pktlen = pattrib->hdrlen;
++	pframe += pattrib->hdrlen;
++
++
++	if(cur_network->IELength>MAX_IE_SZ)
++		return;
++	
++#if defined (CONFIG_AP_MODE) && defined (CONFIG_NATIVEAP_MLME)
++	if( (pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE)
++	{
++		pwps_ie = rtw_get_wps_ie(cur_network->IEs+_FIXED_IE_LENGTH_, cur_network->IELength-_FIXED_IE_LENGTH_, NULL, &wps_ielen);
++	
++		//inerset & update wps_probe_resp_ie
++		if((pmlmepriv->wps_probe_resp_ie!=NULL) && pwps_ie && (wps_ielen>0))
++		{
++			uint wps_offset, remainder_ielen;
++			u8 *premainder_ie;		
++	
++			wps_offset = (uint)(pwps_ie - cur_network->IEs);
++
++			premainder_ie = pwps_ie + wps_ielen;
++
++			remainder_ielen = cur_network->IELength - wps_offset - wps_ielen;
++
++			_rtw_memcpy(pframe, cur_network->IEs, wps_offset);		
++			pframe += wps_offset;		
++			pattrib->pktlen += wps_offset;		
++
++			wps_ielen = (uint)pmlmepriv->wps_probe_resp_ie[1];//to get ie data len
++			if((wps_offset+wps_ielen+2)<=MAX_IE_SZ)
++			{
++				_rtw_memcpy(pframe, pmlmepriv->wps_probe_resp_ie, wps_ielen+2);
++				pframe += wps_ielen+2;		
++				pattrib->pktlen += wps_ielen+2;	
++			}
++
++			if((wps_offset+wps_ielen+2+remainder_ielen)<=MAX_IE_SZ)
++			{
++				_rtw_memcpy(pframe, premainder_ie, remainder_ielen);
++				pframe += remainder_ielen;		
++				pattrib->pktlen += remainder_ielen;	
++			}
++		}
++		else
++		{
++			_rtw_memcpy(pframe, cur_network->IEs, cur_network->IELength);
++			pframe += cur_network->IELength;
++			pattrib->pktlen += cur_network->IELength;
++		}
++
++		/* retrieve SSID IE from cur_network->Ssid */
++		{
++			u8 *ssid_ie;
++			sint ssid_ielen;
++			sint ssid_ielen_diff;
++			u8 buf[MAX_IE_SZ];
++			u8 *ies = pmgntframe->buf_addr+TXDESC_OFFSET+sizeof(struct rtw_ieee80211_hdr_3addr);
++
++			ssid_ie = rtw_get_ie(ies+_FIXED_IE_LENGTH_, _SSID_IE_, &ssid_ielen,
++				(pframe-ies)-_FIXED_IE_LENGTH_);
++
++			ssid_ielen_diff = cur_network->Ssid.SsidLength - ssid_ielen;
++
++			if (ssid_ie &&  cur_network->Ssid.SsidLength) {
++				uint remainder_ielen;
++				u8 *remainder_ie;
++				remainder_ie = ssid_ie+2;
++				remainder_ielen = (pframe-remainder_ie);
++
++				LOG_LEVEL(_drv_warning_, FUNC_ADPT_FMT" remainder_ielen > MAX_IE_SZ\n", FUNC_ADPT_ARG(padapter));
++				if (remainder_ielen > MAX_IE_SZ) {
++					remainder_ielen = MAX_IE_SZ;
++				}
++
++				_rtw_memcpy(buf, remainder_ie, remainder_ielen);
++				_rtw_memcpy(remainder_ie+ssid_ielen_diff, buf, remainder_ielen);
++				*(ssid_ie+1) = cur_network->Ssid.SsidLength;
++				_rtw_memcpy(ssid_ie+2, cur_network->Ssid.Ssid, cur_network->Ssid.SsidLength);
++
++				pframe += ssid_ielen_diff;
++				pattrib->pktlen += ssid_ielen_diff;
++			}
++		}
++	}	
++	else		
++#endif		
++	{
++	
++		//timestamp will be inserted by hardware
++		pframe += 8;
++		pattrib->pktlen += 8;
++
++		// beacon interval: 2 bytes
++
++		_rtw_memcpy(pframe, (unsigned char *)(rtw_get_beacon_interval_from_ie(cur_network->IEs)), 2); 
++
++		pframe += 2;
++		pattrib->pktlen += 2;
++
++		// capability info: 2 bytes
++
++		_rtw_memcpy(pframe, (unsigned char *)(rtw_get_capability_from_ie(cur_network->IEs)), 2);
++
++		pframe += 2;
++		pattrib->pktlen += 2;
++
++		//below for ad-hoc mode
++
++		// SSID
++		pframe = rtw_set_ie(pframe, _SSID_IE_, cur_network->Ssid.SsidLength, cur_network->Ssid.Ssid, &pattrib->pktlen);
++
++		// supported rates...
++		rate_len = rtw_get_rateset_len(cur_network->SupportedRates);
++		pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_, ((rate_len > 8)? 8: rate_len), cur_network->SupportedRates, &pattrib->pktlen);
++
++		// DS parameter set
++		pframe =rtw_set_ie(pframe, _DSSET_IE_, 1, (unsigned char *)&(cur_network->Configuration.DSConfig), &pattrib->pktlen);
++
++		if( (pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE)
++		{
++			u8 erpinfo=0;
++			u32 ATIMWindow;
++			// IBSS Parameter Set...
++			//ATIMWindow = cur->Configuration.ATIMWindow;
++			ATIMWindow = 0;
++			pframe = rtw_set_ie(pframe, _IBSS_PARA_IE_, 2, (unsigned char *)(&ATIMWindow), &pattrib->pktlen);
++
++			//ERP IE
++			pframe = rtw_set_ie(pframe, _ERPINFO_IE_, 1, &erpinfo, &pattrib->pktlen);
++		}
++
++		
++		// EXTERNDED SUPPORTED RATE
++		if (rate_len > 8)
++		{
++			pframe = rtw_set_ie(pframe, _EXT_SUPPORTEDRATES_IE_, (rate_len - 8), (cur_network->SupportedRates + 8), &pattrib->pktlen);
++		}
++
++
++		//todo:HT for adhoc
++
++	}	
++
++#ifdef CONFIG_P2P
++	if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO) /*&& is_valid_p2p_probereq*/)
++	{
++		u32 len;
++#ifdef CONFIG_IOCTL_CFG80211
++		if(wdev_to_priv(padapter->rtw_wdev)->p2p_enabled && pwdinfo->driver_interface == DRIVER_CFG80211 )
++		{
++			//if pwdinfo->role == P2P_ROLE_DEVICE will call issue_probersp_p2p()
++			len = pmlmepriv->p2p_go_probe_resp_ie_len;
++			if(pmlmepriv->p2p_go_probe_resp_ie && len>0)
++				_rtw_memcpy(pframe, pmlmepriv->p2p_go_probe_resp_ie, len);
++		}
++		else
++#endif //CONFIG_IOCTL_CFG80211
++		{
++			len = build_probe_resp_p2p_ie(pwdinfo, pframe);
++		}
++
++		pframe += len;
++		pattrib->pktlen += len;
++		
++#ifdef CONFIG_WFD
++#ifdef CONFIG_IOCTL_CFG80211
++		if(_TRUE == pwdinfo->wfd_info->wfd_enable)
++#endif //CONFIG_IOCTL_CFG80211
++		{
++			len = build_probe_resp_wfd_ie(pwdinfo, pframe, 0);
++		}
++#ifdef CONFIG_IOCTL_CFG80211
++		else
++		{	
++			len = 0;
++			if(pmlmepriv->wfd_probe_resp_ie && pmlmepriv->wfd_probe_resp_ie_len>0)
++			{
++				len = pmlmepriv->wfd_probe_resp_ie_len;
++				_rtw_memcpy(pframe, pmlmepriv->wfd_probe_resp_ie, len);	
++			}	
++		}
++#endif //CONFIG_IOCTL_CFG80211		
++		pframe += len;
++		pattrib->pktlen += len;
++#endif //CONFIG_WFD
++
++	}
++#endif //CONFIG_P2P
++
++
++#ifdef CONFIG_AUTO_AP_MODE
++{
++	struct sta_info *psta;
++	struct sta_priv *pstapriv = &padapter->stapriv;
++
++	DBG_871X("(%s)\n", __FUNCTION__);
++
++	//check rc station
++	psta = rtw_get_stainfo(pstapriv, da);
++	if (psta && psta->isrc && psta->pid>0)
++	{
++		u8 RC_OUI[4]={0x00,0xE0,0x4C,0x0A};
++		u8 RC_INFO[14] = {0};
++		//EID[1] + EID_LEN[1] + RC_OUI[4] + MAC[6] + PairingID[2] + ChannelNum[2]
++		u16 cu_ch = (u16)cur_network->Configuration.DSConfig;
++
++		DBG_871X("%s, reply rc(pid=0x%x) device "MAC_FMT" in ch=%d\n", __FUNCTION__,
++			psta->pid, MAC_ARG(psta->hwaddr), cu_ch);
++
++		//append vendor specific ie
++		_rtw_memcpy(RC_INFO, RC_OUI, sizeof(RC_OUI));
++		_rtw_memcpy(&RC_INFO[4], mac, ETH_ALEN);
++		_rtw_memcpy(&RC_INFO[10], (u8*)&psta->pid, 2);
++		_rtw_memcpy(&RC_INFO[12], (u8*)&cu_ch, 2);
++
++		pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, sizeof(RC_INFO), RC_INFO, &pattrib->pktlen);
++	}
++}
++#endif //CONFIG_AUTO_AP_MODE
++
++
++	pattrib->last_txcmdsz = pattrib->pktlen;
++	
++
++	dump_mgntframe(padapter, pmgntframe);
++	
++	return;
++
++}
++
++int _issue_probereq(_adapter *padapter, NDIS_802_11_SSID *pssid, u8 *da, int wait_ack)
++{
++	int ret = _FAIL;
++	struct xmit_frame		*pmgntframe;
++	struct pkt_attrib		*pattrib;
++	unsigned char			*pframe;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	unsigned short		*fctrl;
++	unsigned char			*mac;
++	unsigned char			bssrate[NumRates];
++	struct xmit_priv		*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	int	bssrate_len = 0;
++	u8	bc_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
++
++	RT_TRACE(_module_rtl871x_mlme_c_,_drv_notice_,("+issue_probereq\n"));
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		goto exit;
++	}
++
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);
++
++
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	mac = myid(&(padapter->eeprompriv));
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++
++	if (da)
++	{
++		//	unicast probe request frame
++		_rtw_memcpy(pwlanhdr->addr1, da, ETH_ALEN);
++		_rtw_memcpy(pwlanhdr->addr3, da, ETH_ALEN);
++	}
++	else
++	{
++		//	broadcast probe request frame
++		_rtw_memcpy(pwlanhdr->addr1, bc_addr, ETH_ALEN);
++		_rtw_memcpy(pwlanhdr->addr3, bc_addr, ETH_ALEN);
++	}
++
++	_rtw_memcpy(pwlanhdr->addr2, mac, ETH_ALEN);
++
++	SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq);
++	pmlmeext->mgnt_seq++;
++	SetFrameSubType(pframe, WIFI_PROBEREQ);
++
++	pframe += sizeof (struct rtw_ieee80211_hdr_3addr);
++	pattrib->pktlen = sizeof (struct rtw_ieee80211_hdr_3addr);
++
++	if(pssid)
++		pframe = rtw_set_ie(pframe, _SSID_IE_, pssid->SsidLength, pssid->Ssid, &(pattrib->pktlen));
++	else
++		pframe = rtw_set_ie(pframe, _SSID_IE_, 0, NULL, &(pattrib->pktlen));
++
++	get_rate_set(padapter, bssrate, &bssrate_len);
++
++	if (bssrate_len > 8)
++	{
++		pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_ , 8, bssrate, &(pattrib->pktlen));
++		pframe = rtw_set_ie(pframe, _EXT_SUPPORTEDRATES_IE_ , (bssrate_len - 8), (bssrate + 8), &(pattrib->pktlen));
++	}
++	else
++	{
++		pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_ , bssrate_len , bssrate, &(pattrib->pktlen));
++	}
++
++#if 0
++	//add wps_ie for wps2.0
++	if(pmlmepriv->probereq_wpsie_len>0 && pmlmepriv->probereq_wpsie_len<MAX_WPS_IE_LEN)
++	{
++		_rtw_memcpy(pframe, pmlmepriv->probereq_wpsie, pmlmepriv->probereq_wpsie_len);
++		pframe += pmlmepriv->probereq_wpsie_len;
++		pattrib->pktlen += pmlmepriv->probereq_wpsie_len;
++		//pmlmepriv->probereq_wpsie_len = 0 ;//reset to zero		
++	}	
++#else
++	//add wps_ie for wps2.0
++	if(pmlmepriv->wps_probe_req_ie_len>0 && pmlmepriv->wps_probe_req_ie)
++	{
++		_rtw_memcpy(pframe, pmlmepriv->wps_probe_req_ie, pmlmepriv->wps_probe_req_ie_len);
++		pframe += pmlmepriv->wps_probe_req_ie_len;
++		pattrib->pktlen += pmlmepriv->wps_probe_req_ie_len;
++		//pmlmepriv->wps_probe_req_ie_len = 0 ;//reset to zero		
++	}	
++#endif
++
++	pattrib->last_txcmdsz = pattrib->pktlen;
++
++	RT_TRACE(_module_rtl871x_mlme_c_,_drv_notice_,("issuing probe_req, tx_len=%d\n", pattrib->last_txcmdsz));
++
++	if (wait_ack) {
++		ret = dump_mgntframe_and_wait_ack(padapter, pmgntframe);
++	} else {
++		dump_mgntframe(padapter, pmgntframe);
++		ret = _SUCCESS;
++	}
++
++exit:
++	return ret;
++}
++
++inline void issue_probereq(_adapter *padapter, NDIS_802_11_SSID *pssid, u8 *da)
++{
++	_issue_probereq(padapter, pssid, da, _FALSE);
++}
++
++int issue_probereq_ex(_adapter *padapter, NDIS_802_11_SSID *pssid, u8 *da,
++	int try_cnt, int wait_ms)
++{
++	int ret;
++	int i = 0;
++	u32 start = rtw_get_current_time();
++
++	do
++	{
++		ret = _issue_probereq(padapter, pssid, da, wait_ms>0?_TRUE:_FALSE);
++
++		i++;
++
++		if (padapter->bDriverStopped || padapter->bSurpriseRemoved)
++			break;
++
++		if(i < try_cnt && wait_ms > 0 && ret==_FAIL)
++			rtw_msleep_os(wait_ms);
++
++	}while((i<try_cnt) && ((ret==_FAIL)||(wait_ms==0)));
++
++	if (ret != _FAIL) {
++		ret = _SUCCESS;
++		#ifndef DBG_XMIT_ACK
++		goto exit;
++		#endif
++	}
++
++	if (try_cnt && wait_ms) {
++		if (da)
++			DBG_871X(FUNC_ADPT_FMT" to "MAC_FMT", ch:%u%s, %d/%d in %u ms\n",
++				FUNC_ADPT_ARG(padapter), MAC_ARG(da), rtw_get_oper_ch(padapter),
++				ret==_SUCCESS?", acked":"", i, try_cnt, rtw_get_passing_time_ms(start));
++		else
++			DBG_871X(FUNC_ADPT_FMT", ch:%u%s, %d/%d in %u ms\n",
++				FUNC_ADPT_ARG(padapter), rtw_get_oper_ch(padapter),
++				ret==_SUCCESS?", acked":"", i, try_cnt, rtw_get_passing_time_ms(start));
++	}
++exit:
++	return ret;
++}
++
++// if psta == NULL, indiate we are station(client) now...
++void issue_auth(_adapter *padapter, struct sta_info *psta, unsigned short status)
++{
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	unsigned char					*pframe;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	unsigned short				*fctrl;
++	unsigned int					val32;
++	unsigned short				val16;
++	int use_shared_key = 0;
++	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);
++
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++
++	SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq);
++	pmlmeext->mgnt_seq++;
++	SetFrameSubType(pframe, WIFI_AUTH);
++
++	pframe += sizeof(struct rtw_ieee80211_hdr_3addr);
++	pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr);
++
++
++	if(psta)// for AP mode
++	{
++#ifdef CONFIG_NATIVEAP_MLME
++
++		_rtw_memcpy(pwlanhdr->addr1, psta->hwaddr, ETH_ALEN);		
++		_rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN);
++		_rtw_memcpy(pwlanhdr->addr3, myid(&(padapter->eeprompriv)), ETH_ALEN);
++
++	
++		// setting auth algo number	
++		val16 = (u16)psta->authalg;
++
++		if(status != _STATS_SUCCESSFUL_)
++			val16 = 0;
++
++		if (val16)	{
++			val16 = cpu_to_le16(val16);	
++			use_shared_key = 1;
++		}
++
++		pframe = rtw_set_fixed_ie(pframe, _AUTH_ALGM_NUM_, (unsigned char *)&val16, &(pattrib->pktlen));
++
++		// setting auth seq number
++		val16 =(u16)psta->auth_seq;
++		val16 = cpu_to_le16(val16);	
++		pframe = rtw_set_fixed_ie(pframe, _AUTH_SEQ_NUM_, (unsigned char *)&val16, &(pattrib->pktlen));
++
++		// setting status code...
++		val16 = status;
++		val16 = cpu_to_le16(val16);	
++		pframe = rtw_set_fixed_ie(pframe, _STATUS_CODE_, (unsigned char *)&val16, &(pattrib->pktlen));
++
++		// added challenging text...
++		if ((psta->auth_seq == 2) && (psta->state & WIFI_FW_AUTH_STATE) && (use_shared_key==1))
++		{
++			pframe = rtw_set_ie(pframe, _CHLGETXT_IE_, 128, psta->chg_txt, &(pattrib->pktlen));			
++		}
++#endif
++	}
++	else
++	{		
++		_rtw_memcpy(pwlanhdr->addr1, get_my_bssid(&pmlmeinfo->network), ETH_ALEN);
++		_rtw_memcpy(pwlanhdr->addr2, myid(&padapter->eeprompriv), ETH_ALEN);
++		_rtw_memcpy(pwlanhdr->addr3, get_my_bssid(&pmlmeinfo->network), ETH_ALEN);
++	
++		// setting auth algo number		
++		val16 = (pmlmeinfo->auth_algo == dot11AuthAlgrthm_Shared)? 1: 0;// 0:OPEN System, 1:Shared key
++		if (val16)	{
++			val16 = cpu_to_le16(val16);	
++			use_shared_key = 1;
++		}	
++		//DBG_871X("%s auth_algo= %s auth_seq=%d\n",__FUNCTION__,(pmlmeinfo->auth_algo==0)?"OPEN":"SHARED",pmlmeinfo->auth_seq);
++		
++		//setting IV for auth seq #3
++		if ((pmlmeinfo->auth_seq == 3) && (pmlmeinfo->state & WIFI_FW_AUTH_STATE) && (use_shared_key==1))
++		{
++			//DBG_871X("==> iv(%d),key_index(%d)\n",pmlmeinfo->iv,pmlmeinfo->key_index);
++			val32 = ((pmlmeinfo->iv++) | (pmlmeinfo->key_index << 30));
++			val32 = cpu_to_le32(val32);
++			pframe = rtw_set_fixed_ie(pframe, 4, (unsigned char *)&val32, &(pattrib->pktlen));
++
++			pattrib->iv_len = 4;
++		}
++
++		pframe = rtw_set_fixed_ie(pframe, _AUTH_ALGM_NUM_, (unsigned char *)&val16, &(pattrib->pktlen));
++		
++		// setting auth seq number
++		val16 = pmlmeinfo->auth_seq;
++		val16 = cpu_to_le16(val16);	
++		pframe = rtw_set_fixed_ie(pframe, _AUTH_SEQ_NUM_, (unsigned char *)&val16, &(pattrib->pktlen));
++
++		
++		// setting status code...
++		val16 = status;
++		val16 = cpu_to_le16(val16);	
++		pframe = rtw_set_fixed_ie(pframe, _STATUS_CODE_, (unsigned char *)&val16, &(pattrib->pktlen));
++
++		// then checking to see if sending challenging text...
++		if ((pmlmeinfo->auth_seq == 3) && (pmlmeinfo->state & WIFI_FW_AUTH_STATE) && (use_shared_key==1))
++		{
++			pframe = rtw_set_ie(pframe, _CHLGETXT_IE_, 128, pmlmeinfo->chg_txt, &(pattrib->pktlen));
++
++			SetPrivacy(fctrl);
++			
++			pattrib->hdrlen = sizeof(struct rtw_ieee80211_hdr_3addr);			
++			
++			pattrib->encrypt = _WEP40_;
++
++			pattrib->icv_len = 4;
++			
++			pattrib->pktlen += pattrib->icv_len;			
++			
++		}
++		
++	}
++
++	pattrib->last_txcmdsz = pattrib->pktlen;
++
++	rtw_wep_encrypt(padapter, (u8 *)pmgntframe);
++
++	dump_mgntframe(padapter, pmgntframe);
++
++	return;
++}
++
++
++void issue_asocrsp(_adapter *padapter, unsigned short status, struct sta_info *pstat, int pkt_type)
++{
++#ifdef CONFIG_AP_MODE
++	struct xmit_frame	*pmgntframe;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	struct pkt_attrib *pattrib;
++	unsigned char	*pbuf, *pframe;
++	unsigned short val;		
++	unsigned short *fctrl;
++	struct xmit_priv *pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);	
++	WLAN_BSSID_EX *pnetwork = &(pmlmeinfo->network);
++	u8 *ie = pnetwork->IEs; 
++#ifdef CONFIG_P2P
++	struct wifidirect_info	*pwdinfo = &(padapter->wdinfo);
++#ifdef CONFIG_WFD
++	u32					wfdielen = 0;
++#endif //CONFIG_WFD
++#endif //CONFIG_P2P
++
++	DBG_871X("%s\n", __FUNCTION__);
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);
++
++
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++
++	_rtw_memcpy((void *)GetAddr1Ptr(pwlanhdr), pstat->hwaddr, ETH_ALEN);
++	_rtw_memcpy((void *)GetAddr2Ptr(pwlanhdr), myid(&(padapter->eeprompriv)), ETH_ALEN);
++	_rtw_memcpy((void *)GetAddr3Ptr(pwlanhdr), get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN);
++
++
++	SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq);
++	pmlmeext->mgnt_seq++;
++	if ((pkt_type == WIFI_ASSOCRSP) || (pkt_type == WIFI_REASSOCRSP))
++		SetFrameSubType(pwlanhdr, pkt_type);		
++	else
++		return;
++
++	pattrib->hdrlen = sizeof(struct rtw_ieee80211_hdr_3addr);
++	pattrib->pktlen += pattrib->hdrlen;
++	pframe += pattrib->hdrlen;
++
++	//capability
++	val = *(unsigned short *)rtw_get_capability_from_ie(ie);
++
++	pframe = rtw_set_fixed_ie(pframe, _CAPABILITY_ , (unsigned char *)&val, &(pattrib->pktlen));
++
++	status = cpu_to_le16(status);
++	pframe = rtw_set_fixed_ie(pframe , _STATUS_CODE_ , (unsigned char *)&status, &(pattrib->pktlen));
++	
++	val = cpu_to_le16(pstat->aid | BIT(14) | BIT(15));
++	pframe = rtw_set_fixed_ie(pframe, _ASOC_ID_ , (unsigned char *)&val, &(pattrib->pktlen));
++
++	if (pstat->bssratelen <= 8)
++	{
++		pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_, pstat->bssratelen, pstat->bssrateset, &(pattrib->pktlen));
++	}	
++	else 
++	{
++		pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_, 8, pstat->bssrateset, &(pattrib->pktlen));
++		pframe = rtw_set_ie(pframe, _EXT_SUPPORTEDRATES_IE_, (pstat->bssratelen-8), pstat->bssrateset+8, &(pattrib->pktlen));
++	}
++
++#ifdef CONFIG_80211N_HT
++	if ((pstat->flags & WLAN_STA_HT) && (pmlmepriv->htpriv.ht_option))
++	{
++		uint ie_len=0;
++		
++		//FILL HT CAP INFO IE
++		//p = hostapd_eid_ht_capabilities_info(hapd, p);
++		pbuf = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _HT_CAPABILITY_IE_, &ie_len, (pnetwork->IELength - _BEACON_IE_OFFSET_));
++		if(pbuf && ie_len>0)
++		{
++			_rtw_memcpy(pframe, pbuf, ie_len+2);
++			pframe += (ie_len+2);
++			pattrib->pktlen +=(ie_len+2);
++		}
++
++		//FILL HT ADD INFO IE
++		//p = hostapd_eid_ht_operation(hapd, p);
++		pbuf = rtw_get_ie(ie + _BEACON_IE_OFFSET_, _HT_ADD_INFO_IE_, &ie_len, (pnetwork->IELength - _BEACON_IE_OFFSET_));
++		if(pbuf && ie_len>0)
++		{
++			_rtw_memcpy(pframe, pbuf, ie_len+2);
++			pframe += (ie_len+2);
++			pattrib->pktlen +=(ie_len+2);
++		}
++		
++	}	
++#endif
++
++	//FILL WMM IE
++	if ((pstat->flags & WLAN_STA_WME) && (pmlmepriv->qospriv.qos_option))
++	{
++		uint ie_len=0;
++		unsigned char WMM_PARA_IE[] = {0x00, 0x50, 0xf2, 0x02, 0x01, 0x01};	
++		
++		for (pbuf = ie + _BEACON_IE_OFFSET_; ;pbuf+= (ie_len + 2))
++		{			
++			pbuf = rtw_get_ie(pbuf, _VENDOR_SPECIFIC_IE_, &ie_len, (pnetwork->IELength - _BEACON_IE_OFFSET_ - (ie_len + 2)));	
++			if(pbuf && _rtw_memcmp(pbuf+2, WMM_PARA_IE, 6)) 
++			{				
++				_rtw_memcpy(pframe, pbuf, ie_len+2);
++				pframe += (ie_len+2);
++				pattrib->pktlen +=(ie_len+2);
++				
++				break;				
++			}
++			
++			if ((pbuf == NULL) || (ie_len == 0))
++			{
++				break;
++			}			
++		}
++		
++	}
++
++
++	if (pmlmeinfo->assoc_AP_vendor == realtekAP)
++	{
++		pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, 6 , REALTEK_96B_IE, &(pattrib->pktlen));
++	}
++
++	//add WPS IE ie for wps 2.0
++	if(pmlmepriv->wps_assoc_resp_ie && pmlmepriv->wps_assoc_resp_ie_len>0)
++	{
++		_rtw_memcpy(pframe, pmlmepriv->wps_assoc_resp_ie, pmlmepriv->wps_assoc_resp_ie_len);
++		
++		pframe += pmlmepriv->wps_assoc_resp_ie_len;
++		pattrib->pktlen += pmlmepriv->wps_assoc_resp_ie_len;
++	}
++
++#ifdef CONFIG_P2P
++	if( padapter->wdinfo.driver_interface == DRIVER_WEXT )
++	{
++		if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO) && (pstat->is_p2p_device == _TRUE))
++		{
++			u32 len;
++
++			len = build_assoc_resp_p2p_ie(pwdinfo, pframe, pstat->p2p_status_code);
++
++			pframe += len;
++			pattrib->pktlen += len;
++		}
++	}
++#ifdef CONFIG_WFD
++	if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO)
++#ifdef CONFIG_IOCTL_CFG80211		
++		&& (_TRUE == pwdinfo->wfd_info->wfd_enable)
++#endif //CONFIG_IOCTL_CFG80211	
++	)
++	{
++		wfdielen = build_assoc_resp_wfd_ie(pwdinfo, pframe);
++		pframe += wfdielen;
++		pattrib->pktlen += wfdielen;
++	}
++#endif //CONFIG_WFD
++#endif //CONFIG_P2P
++
++	pattrib->last_txcmdsz = pattrib->pktlen;
++	
++	dump_mgntframe(padapter, pmgntframe);
++	
++#endif
++}
++
++void issue_assocreq(_adapter *padapter)
++{
++	int ret = _FAIL;
++	struct xmit_frame				*pmgntframe;
++	struct pkt_attrib				*pattrib;
++	unsigned char					*pframe, *p;
++	struct rtw_ieee80211_hdr			*pwlanhdr;
++	unsigned short				*fctrl;
++	unsigned short				val16;
++	unsigned int					i, j, ie_len, index=0;
++	unsigned char					rf_type, bssrate[NumRates], sta_bssrate[NumRates];
++	PNDIS_802_11_VARIABLE_IEs	pIE;
++	struct registry_priv	*pregpriv = &padapter->registrypriv;
++	struct xmit_priv		*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	int	bssrate_len = 0, sta_bssrate_len = 0;
++	u8	cbw40_enable = 0;
++#ifdef CONFIG_P2P
++	struct wifidirect_info	*pwdinfo = &(padapter->wdinfo);
++	u8					p2pie[ 255 ] = { 0x00 };
++	u16					p2pielen = 0;	
++#ifdef CONFIG_WFD
++	u32					wfdielen = 0;
++#endif //CONFIG_WFD
++#endif //CONFIG_P2P
++
++#ifdef CONFIG_DFS
++	u16	cap;
++	u8 pow_cap_ele[2] = { 0x00 };
++	u8 sup_ch[ 30 * 2 ] = {0x00 }, sup_ch_idx = 0, idx_5g = 2;	//For supported channel
++#endif //CONFIG_DFS
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++		goto exit;
++
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);
++
++
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++	_rtw_memcpy(pwlanhdr->addr1, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr3, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN);
++
++	SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq);
++	pmlmeext->mgnt_seq++;
++	SetFrameSubType(pframe, WIFI_ASSOCREQ);
++
++	pframe += sizeof(struct rtw_ieee80211_hdr_3addr);
++	pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr);
++
++	//caps
++
++#ifdef CONFIG_DFS
++	_rtw_memcpy(&cap, rtw_get_capability_from_ie(pmlmeinfo->network.IEs), 2);
++	if(pmlmeext->cur_channel > 14)
++		cap |= BIT(8); //Spectrum Mgmt. Enabled
++	_rtw_memcpy(pframe, &cap, 2);
++#else
++	_rtw_memcpy(pframe, rtw_get_capability_from_ie(pmlmeinfo->network.IEs), 2);
++#endif //CONFIG_DFS
++
++	pframe += 2;
++	pattrib->pktlen += 2;
++
++	//listen interval
++	//todo: listen interval for power saving
++	val16 = cpu_to_le16(3);
++	_rtw_memcpy(pframe ,(unsigned char *)&val16, 2);
++	pframe += 2;
++	pattrib->pktlen += 2;
++
++	//SSID
++	pframe = rtw_set_ie(pframe, _SSID_IE_,  pmlmeinfo->network.Ssid.SsidLength, pmlmeinfo->network.Ssid.Ssid, &(pattrib->pktlen));
++
++	//supported rate & extended supported rate
++
++#if 1	// Check if the AP's supported rates are also supported by STA.
++	get_rate_set(padapter, sta_bssrate, &sta_bssrate_len);
++	//DBG_871X("sta_bssrate_len=%d\n", sta_bssrate_len);
++	
++	if(pmlmeext->cur_channel == 14)// for JAPAN, channel 14 can only uses B Mode(CCK) 
++	{
++		sta_bssrate_len = 4;
++	}
++
++	
++	//for (i = 0; i < sta_bssrate_len; i++) {
++	//	DBG_871X("sta_bssrate[%d]=%02X\n", i, sta_bssrate[i]);
++	//}
++
++	for (i = 0; i < NDIS_802_11_LENGTH_RATES_EX; i++) {
++		if (pmlmeinfo->network.SupportedRates[i] == 0) break;
++		DBG_871X("network.SupportedRates[%d]=%02X\n", i, pmlmeinfo->network.SupportedRates[i]);
++	}
++	
++
++	for (i = 0; i < NDIS_802_11_LENGTH_RATES_EX; i++) {
++		if (pmlmeinfo->network.SupportedRates[i] == 0) break;
++
++		
++		// Check if the AP's supported rates are also supported by STA.
++		for (j=0; j < sta_bssrate_len; j++) {
++			 // Avoid the proprietary data rate (22Mbps) of Handlink WSG-4000 AP
++			if ( (pmlmeinfo->network.SupportedRates[i]|IEEE80211_BASIC_RATE_MASK) 
++					== (sta_bssrate[j]|IEEE80211_BASIC_RATE_MASK)) {
++				//DBG_871X("match i = %d, j=%d\n", i, j);
++				break;
++			} else {
++				//DBG_871X("not match: %02X != %02X\n", (pmlmeinfo->network.SupportedRates[i]|IEEE80211_BASIC_RATE_MASK), (sta_bssrate[j]|IEEE80211_BASIC_RATE_MASK));
++			}
++		}
++		
++		if (j == sta_bssrate_len) {
++			// the rate is not supported by STA
++			DBG_871X("%s(): the rate[%d]=%02X is not supported by STA!\n",__FUNCTION__, i, pmlmeinfo->network.SupportedRates[i]);
++		} else {
++			// the rate is supported by STA
++			bssrate[index++] = pmlmeinfo->network.SupportedRates[i];
++		}
++	}
++	
++	bssrate_len = index;
++	DBG_871X("bssrate_len = %d\n", bssrate_len);
++
++#else	// Check if the AP's supported rates are also supported by STA.
++#if 0
++	get_rate_set(padapter, bssrate, &bssrate_len);
++#else
++	for (bssrate_len = 0; bssrate_len < NumRates; bssrate_len++) {
++		if (pmlmeinfo->network.SupportedRates[bssrate_len] == 0) break;
++
++		if (pmlmeinfo->network.SupportedRates[bssrate_len] == 0x2C) // Avoid the proprietary data rate (22Mbps) of Handlink WSG-4000 AP
++			break;
++
++		bssrate[bssrate_len] = pmlmeinfo->network.SupportedRates[bssrate_len];
++	}
++#endif
++#endif	// Check if the AP's supported rates are also supported by STA.
++
++	if (bssrate_len == 0) {
++		rtw_free_xmitbuf(pxmitpriv, pmgntframe->pxmitbuf);
++		rtw_free_xmitframe(pxmitpriv, pmgntframe);
++		goto exit; //don't connect to AP if no joint supported rate
++	}
++
++
++	if (bssrate_len > 8)
++	{
++		pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_ , 8, bssrate, &(pattrib->pktlen));
++		pframe = rtw_set_ie(pframe, _EXT_SUPPORTEDRATES_IE_ , (bssrate_len - 8), (bssrate + 8), &(pattrib->pktlen));
++	}
++	else
++	{
++		pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_ , bssrate_len , bssrate, &(pattrib->pktlen));
++	}
++
++#ifdef CONFIG_DFS
++	if(pmlmeext->cur_channel > 14)
++	{
++		pow_cap_ele[0] = 13;	// Minimum transmit power capability
++		pow_cap_ele[1] = 21;	// Maximum transmit power capability
++		pframe = rtw_set_ie(pframe, _POW_CAP_IE_, 2, pow_cap_ele, &(pattrib->pktlen));
++
++		//supported channels
++		do{
++			if( pmlmeext->channel_set[sup_ch_idx].ChannelNum <= 14 )
++			{
++				sup_ch[0] = 1;	//First channel number
++				sup_ch[1] = pmlmeext->channel_set[sup_ch_idx].ChannelNum;	//Number of channel
++			}
++			else
++			{
++				sup_ch[idx_5g++] = pmlmeext->channel_set[sup_ch_idx].ChannelNum;
++				sup_ch[idx_5g++] = 1;
++			}
++			sup_ch_idx++;
++		}
++		while( pmlmeext->channel_set[sup_ch_idx].ChannelNum != 0 );
++		pframe = rtw_set_ie(pframe, _SUPPORTED_CH_IE_, idx_5g, sup_ch, &(pattrib->pktlen));
++	}
++#endif //CONFIG_DFS
++
++	//RSN
++	p = rtw_get_ie((pmlmeinfo->network.IEs + sizeof(NDIS_802_11_FIXED_IEs)), _RSN_IE_2_, &ie_len, (pmlmeinfo->network.IELength - sizeof(NDIS_802_11_FIXED_IEs)));
++	if (p != NULL)
++	{
++		pframe = rtw_set_ie(pframe, _RSN_IE_2_, ie_len, (p + 2), &(pattrib->pktlen));
++	}
++
++#ifdef CONFIG_80211N_HT
++	//HT caps
++	if(padapter->mlmepriv.htpriv.ht_option==_TRUE)
++	{
++		p = rtw_get_ie((pmlmeinfo->network.IEs + sizeof(NDIS_802_11_FIXED_IEs)), _HT_CAPABILITY_IE_, &ie_len, (pmlmeinfo->network.IELength - sizeof(NDIS_802_11_FIXED_IEs)));
++		if ((p != NULL) && (!(is_ap_in_tkip(padapter))))
++		{
++			_rtw_memcpy(&(pmlmeinfo->HT_caps), (p + 2), sizeof(struct HT_caps_element));
++
++			//to disable 40M Hz support while gd_bw_40MHz_en = 0
++			if( pmlmeext->cur_channel > 14)
++			{
++				if(pregpriv->cbw40_enable & BIT(1) )
++					cbw40_enable=1;
++			}
++			else
++				if(pregpriv->cbw40_enable & BIT(0) )
++					cbw40_enable=1;
++
++			if (cbw40_enable == 0)
++			{
++				pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info &= (~(BIT(6) | BIT(1)));
++			}
++			else
++			{
++				pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info |= BIT(1);
++			}
++
++			//todo: disable SM power save mode
++			pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info |= 0x000c;
++
++			rtw_hal_get_hwreg(padapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type));
++			//switch (pregpriv->rf_config)
++			switch(rf_type)
++			{
++				case RF_1T1R:
++				
++					if(pregpriv->rx_stbc)
++						pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info |= cpu_to_le16(0x0100);//RX STBC One spatial stream
++						
++					_rtw_memcpy(pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate, MCS_rate_1R, 16);
++					break;
++
++				case RF_2T2R:
++				case RF_1T2R:
++				default:
++					
++
++					if(pregpriv->special_rf_path)
++					{
++						if(pregpriv->rx_stbc)
++							pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info |= cpu_to_le16(0x0100);//RX STBC One spatial stream
++						_rtw_memcpy(pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate, MCS_rate_1R, 16);
++						break;
++					}
++
++					if((pregpriv->rx_stbc == 0x3) ||//enable for 2.4/5 GHz	
++						((pmlmeext->cur_wireless_mode & WIRELESS_11_24N) && (pregpriv->rx_stbc == 0x1)) || //enable for 2.4GHz
++						((pmlmeext->cur_wireless_mode & WIRELESS_11_5N) && (pregpriv->rx_stbc == 0x2)) || //enable for 5GHz
++						(pregpriv->wifi_spec==1))
++					{
++						DBG_871X("declare supporting RX STBC\n");
++						pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info |= cpu_to_le16(0x0200);//RX STBC two spatial stream
++					}
++					#ifdef CONFIG_DISABLE_MCS13TO15
++					if(pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40 && (pregpriv->wifi_spec!=1))
++						_rtw_memcpy(pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate, MCS_rate_2R_MCS13TO15_OFF, 16);
++					else
++					_rtw_memcpy(pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate, MCS_rate_2R, 16);
++					#else //CONFIG_DISABLE_MCS13TO15
++					_rtw_memcpy(pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate, MCS_rate_2R, 16);
++					#endif //CONFIG_DISABLE_MCS13TO15
++					break;
++			}
++#ifdef RTL8192C_RECONFIG_TO_1T1R
++			{
++				if(pregpriv->rx_stbc)
++					pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info |= cpu_to_le16(0x0100);//RX STBC One spatial stream
++			
++				_rtw_memcpy(pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate, MCS_rate_1R, 16);
++			}
++#endif
++			pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info = cpu_to_le16(pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info);
++			pframe = rtw_set_ie(pframe, _HT_CAPABILITY_IE_, ie_len , (u8 *)(&(pmlmeinfo->HT_caps)), &(pattrib->pktlen));
++
++		}
++	}
++#endif
++
++	//vendor specific IE, such as WPA, WMM, WPS
++	for (i = sizeof(NDIS_802_11_FIXED_IEs); i < pmlmeinfo->network.IELength;)
++	{
++		pIE = (PNDIS_802_11_VARIABLE_IEs)(pmlmeinfo->network.IEs + i);
++
++		switch (pIE->ElementID)
++		{
++			case _VENDOR_SPECIFIC_IE_:
++				if ((_rtw_memcmp(pIE->data, RTW_WPA_OUI, 4)) ||
++						(_rtw_memcmp(pIE->data, WMM_OUI, 4)) ||
++						(_rtw_memcmp(pIE->data, WPS_OUI, 4)))
++				{
++					if(!padapter->registrypriv.wifi_spec)
++					{
++						//Commented by Kurt 20110629
++						//In some older APs, WPS handshake
++						//would be fail if we append vender extensions informations to AP
++						if(_rtw_memcmp(pIE->data, WPS_OUI, 4)){
++							pIE->Length=14;
++						}
++					}
++					pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, pIE->Length, pIE->data, &(pattrib->pktlen));
++				}
++				break;
++
++			default:
++				break;
++		}
++
++		i += (pIE->Length + 2);
++	}
++
++	if (pmlmeinfo->assoc_AP_vendor == realtekAP)
++	{
++		pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, 6 , REALTEK_96B_IE, &(pattrib->pktlen));
++	}
++
++#ifdef CONFIG_P2P
++
++#ifdef CONFIG_IOCTL_CFG80211
++	if(wdev_to_priv(padapter->rtw_wdev)->p2p_enabled && pwdinfo->driver_interface == DRIVER_CFG80211 )
++	{
++		if(pmlmepriv->p2p_assoc_req_ie && pmlmepriv->p2p_assoc_req_ie_len>0)
++		{
++			_rtw_memcpy(pframe, pmlmepriv->p2p_assoc_req_ie, pmlmepriv->p2p_assoc_req_ie_len);
++			pframe += pmlmepriv->p2p_assoc_req_ie_len;
++			pattrib->pktlen += pmlmepriv->p2p_assoc_req_ie_len;
++		}
++	}
++	else
++#endif //CONFIG_IOCTL_CFG80211
++	{
++		if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE) && !rtw_p2p_chk_state(pwdinfo, P2P_STATE_IDLE))
++		{
++			//	Should add the P2P IE in the association request frame.	
++			//	P2P OUI
++			
++			p2pielen = 0;
++			p2pie[ p2pielen++ ] = 0x50;
++			p2pie[ p2pielen++ ] = 0x6F;
++			p2pie[ p2pielen++ ] = 0x9A;
++			p2pie[ p2pielen++ ] = 0x09;	//	WFA P2P v1.0
++
++			//	Commented by Albert 20101109
++			//	According to the P2P Specification, the association request frame should contain 3 P2P attributes
++			//	1. P2P Capability
++			//	2. Extended Listen Timing
++			//	3. Device Info
++			//	Commented by Albert 20110516
++			//	4. P2P Interface
++
++			//	P2P Capability
++			//	Type:
++			p2pie[ p2pielen++ ] = P2P_ATTR_CAPABILITY;
++
++			//	Length:
++			*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0002 );
++			p2pielen += 2;
++
++			//	Value:
++			//	Device Capability Bitmap, 1 byte
++			p2pie[ p2pielen++ ] = DMP_P2P_DEVCAP_SUPPORT;
++
++			//	Group Capability Bitmap, 1 byte
++			if ( pwdinfo->persistent_supported )
++				p2pie[ p2pielen++ ] = P2P_GRPCAP_PERSISTENT_GROUP | DMP_P2P_GRPCAP_SUPPORT;
++			else
++				p2pie[ p2pielen++ ] = DMP_P2P_GRPCAP_SUPPORT;
++
++			//	Extended Listen Timing
++			//	Type:
++			p2pie[ p2pielen++ ] = P2P_ATTR_EX_LISTEN_TIMING;
++
++			//	Length:
++			*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0004 );
++			p2pielen += 2;
++
++			//	Value:
++			//	Availability Period
++			*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0xFFFF );
++			p2pielen += 2;
++
++			//	Availability Interval
++			*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0xFFFF );
++			p2pielen += 2;
++
++			//	Device Info
++			//	Type:
++			p2pie[ p2pielen++ ] = P2P_ATTR_DEVICE_INFO;
++
++			//	Length:
++			//	21 -> P2P Device Address (6bytes) + Config Methods (2bytes) + Primary Device Type (8bytes) 
++			//	+ NumofSecondDevType (1byte) + WPS Device Name ID field (2bytes) + WPS Device Name Len field (2bytes)
++			*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 21 + pwdinfo->device_name_len );
++			p2pielen += 2;
++
++			//	Value:
++			//	P2P Device Address
++			_rtw_memcpy( p2pie + p2pielen, myid( &padapter->eeprompriv ), ETH_ALEN );
++			p2pielen += ETH_ALEN;
++
++			//	Config Method
++			//	This field should be big endian. Noted by P2P specification.
++			if ( ( pwdinfo->ui_got_wps_info == P2P_GOT_WPSINFO_PEER_DISPLAY_PIN ) ||
++				( pwdinfo->ui_got_wps_info == P2P_GOT_WPSINFO_SELF_DISPLAY_PIN ) )
++			{
++				*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_CONFIG_METHOD_DISPLAY );
++			}
++			else
++			{
++				*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_CONFIG_METHOD_PBC );
++			}
++
++			p2pielen += 2;
++
++			//	Primary Device Type
++			//	Category ID
++			*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_CID_MULIT_MEDIA );
++			p2pielen += 2;
++
++			//	OUI
++			*(u32*) ( p2pie + p2pielen ) = cpu_to_be32( WPSOUI );
++			p2pielen += 4;
++
++			//	Sub Category ID
++			*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_SCID_MEDIA_SERVER );
++			p2pielen += 2;
++
++			//	Number of Secondary Device Types
++			p2pie[ p2pielen++ ] = 0x00;	//	No Secondary Device Type List
++
++			//	Device Name
++			//	Type:
++			*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_ATTR_DEVICE_NAME );
++			p2pielen += 2;
++
++			//	Length:
++			*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( pwdinfo->device_name_len );
++			p2pielen += 2;
++
++			//	Value:
++			_rtw_memcpy( p2pie + p2pielen, pwdinfo->device_name, pwdinfo->device_name_len );
++			p2pielen += pwdinfo->device_name_len;
++		
++			//	P2P Interface
++			//	Type:
++			p2pie[ p2pielen++ ] = P2P_ATTR_INTERFACE;
++			
++			//	Length:
++			*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x000D );
++			p2pielen += 2;
++			
++			//	Value:
++			_rtw_memcpy( p2pie + p2pielen, pwdinfo->device_addr, ETH_ALEN );	//	P2P Device Address
++			p2pielen += ETH_ALEN;
++
++			p2pie[ p2pielen++ ] = 1;	//	P2P Interface Address Count
++			
++			_rtw_memcpy( p2pie + p2pielen, pwdinfo->device_addr, ETH_ALEN );	//	P2P Interface Address List
++			p2pielen += ETH_ALEN;
++		
++			pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, p2pielen, (unsigned char *) p2pie, &pattrib->pktlen );
++
++#ifdef CONFIG_WFD
++			//wfdielen = build_assoc_req_wfd_ie(pwdinfo, pframe);
++			//pframe += wfdielen;
++			//pattrib->pktlen += wfdielen;
++#endif //CONFIG_WFD
++		}
++	}
++
++#endif //CONFIG_P2P
++
++#ifdef CONFIG_WFD
++#ifdef CONFIG_IOCTL_CFG80211
++	if ( _TRUE == pwdinfo->wfd_info->wfd_enable )
++#endif //CONFIG_IOCTL_CFG80211
++	{
++		wfdielen = build_assoc_req_wfd_ie(pwdinfo, pframe);
++		pframe += wfdielen;
++		pattrib->pktlen += wfdielen;
++	}
++#ifdef CONFIG_IOCTL_CFG80211
++	else if (pmlmepriv->wfd_assoc_req_ie != NULL && pmlmepriv->wfd_assoc_req_ie_len>0)		
++	{
++		//WFD IE
++		_rtw_memcpy(pframe, pmlmepriv->wfd_assoc_req_ie, pmlmepriv->wfd_assoc_req_ie_len);
++		pattrib->pktlen += pmlmepriv->wfd_assoc_req_ie_len;
++		pframe += pmlmepriv->wfd_assoc_req_ie_len;		
++	}
++#endif //CONFIG_IOCTL_CFG80211
++#endif //CONFIG_WFD	
++
++	pattrib->last_txcmdsz = pattrib->pktlen;
++	dump_mgntframe(padapter, pmgntframe);
++
++	ret = _SUCCESS;
++
++exit:
++	if (ret == _SUCCESS)
++		rtw_buf_update(&pmlmepriv->assoc_req, &pmlmepriv->assoc_req_len, (u8 *)pwlanhdr, pattrib->pktlen);
++	else
++		rtw_buf_free(&pmlmepriv->assoc_req, &pmlmepriv->assoc_req_len);
++
++	return;
++}
++
++//when wait_ack is ture, this function shoule be called at process context
++static int _issue_nulldata(_adapter *padapter, unsigned char *da, unsigned int power_mode, int wait_ack)
++{
++	int ret = _FAIL;
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	unsigned char					*pframe;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	unsigned short				*fctrl;
++	struct xmit_priv	*pxmitpriv;
++	struct mlme_ext_priv	*pmlmeext;
++	struct mlme_ext_info	*pmlmeinfo;
++
++	//DBG_871X("%s:%d\n", __FUNCTION__, power_mode);
++
++	if(!padapter)
++		goto exit;
++
++	pxmitpriv = &(padapter->xmitpriv);
++	pmlmeext = &(padapter->mlmeextpriv);
++	pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		goto exit;
++	}
++
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);
++	pattrib->retry_ctrl = _FALSE;
++
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++
++	if((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE)
++	{
++		SetFrDs(fctrl);
++	}
++	else if((pmlmeinfo->state&0x03) == WIFI_FW_STATION_STATE)
++	{
++		SetToDs(fctrl);
++	}
++	
++	if (power_mode)
++	{
++		SetPwrMgt(fctrl);
++	}
++
++	_rtw_memcpy(pwlanhdr->addr1, da, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr3, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN);
++
++	SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq);
++	pmlmeext->mgnt_seq++;
++	SetFrameSubType(pframe, WIFI_DATA_NULL);
++
++	pframe += sizeof(struct rtw_ieee80211_hdr_3addr);
++	pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr);
++
++	pattrib->last_txcmdsz = pattrib->pktlen;
++
++	if(wait_ack)
++	{
++		ret = dump_mgntframe_and_wait_ack(padapter, pmgntframe);
++	}
++	else
++	{
++		dump_mgntframe(padapter, pmgntframe);
++		ret = _SUCCESS;
++	}
++
++exit:
++	return ret;
++}
++
++
++//when wait_ms >0 , this function shoule be called at process context
++//da == NULL for station mode
++int issue_nulldata(_adapter *padapter, unsigned char *da, unsigned int power_mode, int try_cnt, int wait_ms)
++{
++	int ret;
++	int i = 0;
++	u32 start = rtw_get_current_time();
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	/* da == NULL, assum it's null data for sta to ap*/
++	if (da == NULL)
++		da = get_my_bssid(&(pmlmeinfo->network));
++
++	do
++	{
++		ret = _issue_nulldata(padapter, da, power_mode, wait_ms>0?_TRUE:_FALSE);
++
++		i++;
++
++		if (padapter->bDriverStopped || padapter->bSurpriseRemoved)
++			break;
++
++		if(i < try_cnt && wait_ms > 0 && ret==_FAIL)
++			rtw_msleep_os(wait_ms);
++
++	}while((i<try_cnt) && ((ret==_FAIL)||(wait_ms==0)));
++
++	if (ret != _FAIL) {
++		ret = _SUCCESS;
++		#ifndef DBG_XMIT_ACK
++		goto exit;
++		#endif
++	}
++
++	if (try_cnt && wait_ms) {
++		if (da)
++			DBG_871X(FUNC_ADPT_FMT" to "MAC_FMT", ch:%u%s, %d/%d in %u ms\n",
++				FUNC_ADPT_ARG(padapter), MAC_ARG(da), rtw_get_oper_ch(padapter),
++				ret==_SUCCESS?", acked":"", i, try_cnt, rtw_get_passing_time_ms(start));
++		else
++			DBG_871X(FUNC_ADPT_FMT", ch:%u%s, %d/%d in %u ms\n",
++				FUNC_ADPT_ARG(padapter), rtw_get_oper_ch(padapter),
++				ret==_SUCCESS?", acked":"", i, try_cnt, rtw_get_passing_time_ms(start));
++	}
++exit:
++	return ret;
++}
++
++//when wait_ack is ture, this function shoule be called at process context
++static int _issue_qos_nulldata(_adapter *padapter, unsigned char *da, u16 tid, int wait_ack)
++{
++	int ret = _FAIL;
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	unsigned char					*pframe;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	unsigned short				*fctrl, *qc;
++	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	DBG_871X("%s\n", __FUNCTION__);
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		goto exit;
++	}
++
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);
++
++	pattrib->hdrlen +=2;
++	pattrib->qos_en = _TRUE;
++	pattrib->eosp = 1;
++	pattrib->ack_policy = 0;
++	pattrib->mdata = 0;
++
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++
++	if((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE)
++	{
++		SetFrDs(fctrl);
++	}
++	else if((pmlmeinfo->state&0x03) == WIFI_FW_STATION_STATE)
++	{
++		SetToDs(fctrl);
++	}
++
++	if(pattrib->mdata)
++		SetMData(fctrl);
++
++	qc = (unsigned short *)(pframe + pattrib->hdrlen - 2);
++	
++	SetPriority(qc, tid);
++
++	SetEOSP(qc, pattrib->eosp);
++
++	SetAckpolicy(qc, pattrib->ack_policy);
++
++	_rtw_memcpy(pwlanhdr->addr1, da, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr3, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN);
++
++	SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq);
++	pmlmeext->mgnt_seq++;
++	SetFrameSubType(pframe, WIFI_QOS_DATA_NULL);
++
++	pframe += sizeof(struct rtw_ieee80211_hdr_3addr_qos);
++	pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr_qos);
++
++	pattrib->last_txcmdsz = pattrib->pktlen;
++	
++	if(wait_ack)
++	{
++		ret = dump_mgntframe_and_wait_ack(padapter, pmgntframe);
++	}
++	else
++	{
++		dump_mgntframe(padapter, pmgntframe);
++		ret = _SUCCESS;
++	}
++
++exit:
++	return ret;
++}
++
++//when wait_ms >0 , this function shoule be called at process context
++//da == NULL for station mode
++int issue_qos_nulldata(_adapter *padapter, unsigned char *da, u16 tid, int try_cnt, int wait_ms)
++{
++	int ret;
++	int i = 0;
++	u32 start = rtw_get_current_time();
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	/* da == NULL, assum it's null data for sta to ap*/
++	if (da == NULL)
++		da = get_my_bssid(&(pmlmeinfo->network));
++	
++	do
++	{
++		ret = _issue_qos_nulldata(padapter, da, tid, wait_ms>0?_TRUE:_FALSE);
++
++		i++;
++
++		if (padapter->bDriverStopped || padapter->bSurpriseRemoved)
++			break;
++
++		if(i < try_cnt && wait_ms > 0 && ret==_FAIL)
++			rtw_msleep_os(wait_ms);
++
++	}while((i<try_cnt) && ((ret==_FAIL)||(wait_ms==0)));
++
++	if (ret != _FAIL) {
++		ret = _SUCCESS;
++		#ifndef DBG_XMIT_ACK
++		goto exit;
++		#endif
++	}
++
++	if (try_cnt && wait_ms) {
++		if (da)
++			DBG_871X(FUNC_ADPT_FMT" to "MAC_FMT", ch:%u%s, %d/%d in %u ms\n",
++				FUNC_ADPT_ARG(padapter), MAC_ARG(da), rtw_get_oper_ch(padapter),
++				ret==_SUCCESS?", acked":"", i, try_cnt, rtw_get_passing_time_ms(start));
++		else
++			DBG_871X(FUNC_ADPT_FMT", ch:%u%s, %d/%d in %u ms\n",
++				FUNC_ADPT_ARG(padapter), rtw_get_oper_ch(padapter),
++				ret==_SUCCESS?", acked":"", i, try_cnt, rtw_get_passing_time_ms(start));
++	}
++exit:
++	return ret;
++}
++
++static int _issue_deauth(_adapter *padapter, unsigned char *da, unsigned short reason, u8 wait_ack)
++{
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	unsigned char					*pframe;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	unsigned short				*fctrl;
++	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	int ret = _FAIL;
++#ifdef CONFIG_P2P
++	struct wifidirect_info *pwdinfo= &(padapter->wdinfo);
++#endif //CONFIG_P2P
++	
++	//DBG_871X("%s to "MAC_FMT"\n", __func__, MAC_ARG(da));
++
++#ifdef CONFIG_P2P
++	if ( !( rtw_p2p_chk_state( pwdinfo, P2P_STATE_NONE ) ) && ( pwdinfo->rx_invitereq_info.scan_op_ch_only ) )
++	{
++		_cancel_timer_ex( &pwdinfo->reset_ch_sitesurvey );
++		_set_timer( &pwdinfo->reset_ch_sitesurvey, 10 );
++	}
++#endif //CONFIG_P2P
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		goto exit;
++	}
++
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);
++	pattrib->retry_ctrl = _FALSE;
++
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++
++	_rtw_memcpy(pwlanhdr->addr1, da, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr3, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN);
++
++	SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq);
++	pmlmeext->mgnt_seq++;
++	SetFrameSubType(pframe, WIFI_DEAUTH);
++
++	pframe += sizeof(struct rtw_ieee80211_hdr_3addr);
++	pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr);
++
++	reason = cpu_to_le16(reason);
++	pframe = rtw_set_fixed_ie(pframe, _RSON_CODE_ , (unsigned char *)&reason, &(pattrib->pktlen));
++
++	pattrib->last_txcmdsz = pattrib->pktlen;
++
++
++	if(wait_ack)
++	{
++		ret = dump_mgntframe_and_wait_ack(padapter, pmgntframe);
++	}
++	else
++	{
++		dump_mgntframe(padapter, pmgntframe);
++		ret = _SUCCESS;
++	}
++
++exit:
++	return ret;
++}
++
++int issue_deauth(_adapter *padapter, unsigned char *da, unsigned short reason)
++{
++	DBG_871X("%s to "MAC_FMT"\n", __func__, MAC_ARG(da));
++	return _issue_deauth(padapter, da, reason, _FALSE);
++}
++
++int issue_deauth_ex(_adapter *padapter, u8 *da, unsigned short reason, int try_cnt,
++	int wait_ms)
++{
++	int ret;
++	int i = 0;
++	u32 start = rtw_get_current_time();
++
++	do
++	{
++		ret = _issue_deauth(padapter, da, reason, wait_ms>0?_TRUE:_FALSE);
++
++		i++;
++
++		if (padapter->bDriverStopped || padapter->bSurpriseRemoved)
++			break;
++
++		if(i < try_cnt && wait_ms > 0 && ret==_FAIL)
++			rtw_msleep_os(wait_ms);
++
++	}while((i<try_cnt) && ((ret==_FAIL)||(wait_ms==0)));
++
++	if (ret != _FAIL) {
++		ret = _SUCCESS;
++		#ifndef DBG_XMIT_ACK
++		goto exit;
++		#endif
++	}
++
++	if (try_cnt && wait_ms) {
++		if (da)
++			DBG_871X(FUNC_ADPT_FMT" to "MAC_FMT", ch:%u%s, %d/%d in %u ms\n",
++				FUNC_ADPT_ARG(padapter), MAC_ARG(da), rtw_get_oper_ch(padapter),
++				ret==_SUCCESS?", acked":"", i, try_cnt, rtw_get_passing_time_ms(start));
++		else
++			DBG_871X(FUNC_ADPT_FMT", ch:%u%s, %d/%d in %u ms\n",
++				FUNC_ADPT_ARG(padapter), rtw_get_oper_ch(padapter),
++				ret==_SUCCESS?", acked":"", i, try_cnt, rtw_get_passing_time_ms(start));
++	}
++exit:
++	return ret;
++}
++
++void issue_action_spct_ch_switch(_adapter *padapter, u8 *ra, u8 new_ch, u8 ch_offset)
++{	
++	_irqL	irqL;
++	_list		*plist, *phead;
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	unsigned char				*pframe;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	unsigned short			*fctrl;
++	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++
++	DBG_871X(FUNC_NDEV_FMT" ra="MAC_FMT", ch:%u, offset:%u\n",
++		FUNC_NDEV_ARG(padapter->pnetdev), MAC_ARG(ra), new_ch, ch_offset);
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++		return;
++
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);
++
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++
++	_rtw_memcpy(pwlanhdr->addr1, ra, ETH_ALEN); /* RA */
++	_rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN); /* TA */
++	_rtw_memcpy(pwlanhdr->addr3, ra, ETH_ALEN); /* DA = RA */
++
++	SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq);
++	pmlmeext->mgnt_seq++;
++	SetFrameSubType(pframe, WIFI_ACTION);
++
++	pframe += sizeof(struct rtw_ieee80211_hdr_3addr);
++	pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr);
++
++	/* category, action */
++	{
++		u8 category, action;
++		category = RTW_WLAN_CATEGORY_SPECTRUM_MGMT;
++		action = RTW_WLAN_ACTION_SPCT_CHL_SWITCH;
++
++		pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen));
++		pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen));
++	}
++
++	pframe = rtw_set_ie_ch_switch(pframe, &(pattrib->pktlen), 0, new_ch, 0);
++	pframe = rtw_set_ie_secondary_ch_offset(pframe, &(pattrib->pktlen),
++		hal_ch_offset_to_secondary_ch_offset(ch_offset));
++
++	pattrib->last_txcmdsz = pattrib->pktlen;
++
++	dump_mgntframe(padapter, pmgntframe);
++
++}
++
++#ifdef CONFIG_IEEE80211W
++void issue_action_SA_Query(_adapter *padapter, unsigned char *raddr, unsigned char action, unsigned short tid)
++{
++	u8	category = RTW_WLAN_CATEGORY_SA_QUERY;
++	u16	reason_code;
++	struct xmit_frame		*pmgntframe;
++	struct pkt_attrib		*pattrib;
++	u8					*pframe;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	u16					*fctrl;
++	struct xmit_priv		*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct sta_info		*psta;
++	struct sta_priv		*pstapriv = &padapter->stapriv;
++	struct registry_priv	 	*pregpriv = &padapter->registrypriv;
++
++
++	DBG_871X("%s\n", __FUNCTION__);
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		DBG_871X("%s: alloc_mgtxmitframe fail\n", __FUNCTION__);
++		return;
++	}
++
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);
++
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++
++	if(raddr)
++		_rtw_memcpy(pwlanhdr->addr1, raddr, ETH_ALEN);
++	else
++		_rtw_memcpy(pwlanhdr->addr1, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr3, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN);
++
++	SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq);
++	pmlmeext->mgnt_seq++;
++	SetFrameSubType(pframe, WIFI_ACTION);
++
++	pframe += sizeof(struct rtw_ieee80211_hdr_3addr);
++	pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr);
++
++	pframe = rtw_set_fixed_ie(pframe, 1, &category, &pattrib->pktlen);
++	pframe = rtw_set_fixed_ie(pframe, 1, &action, &pattrib->pktlen);
++
++	switch (action)
++	{
++		case 0: //SA Query req
++			pframe = rtw_set_fixed_ie(pframe, 2, (unsigned char *)&pmlmeext->sa_query_seq, &pattrib->pktlen);
++			pmlmeext->sa_query_seq++;
++			//send sa query request to AP, AP should reply sa query response in 1 second
++			set_sa_query_timer(pmlmeext, 1000);
++			break;
++
++		case 1: //SA Query rsp
++			tid = cpu_to_le16(tid);
++			pframe = rtw_set_fixed_ie(pframe, 2, (unsigned char *)&tid, &pattrib->pktlen);
++			break;
++		default:
++			break;
++	}
++
++	pattrib->last_txcmdsz = pattrib->pktlen;
++
++	dump_mgntframe(padapter, pmgntframe);
++}
++#endif //CONFIG_IEEE80211W
++
++void issue_action_BA(_adapter *padapter, unsigned char *raddr, unsigned char action, unsigned short status)
++{
++	u8	category = RTW_WLAN_CATEGORY_BACK;
++	u16	start_seq;
++	u16	BA_para_set;
++	u16	reason_code;
++	u16	BA_timeout_value;
++	u16	BA_starting_seqctrl;
++	struct xmit_frame		*pmgntframe;
++	struct pkt_attrib		*pattrib;
++	u8					*pframe;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	u16					*fctrl;
++	struct xmit_priv		*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct sta_info		*psta;
++	struct sta_priv		*pstapriv = &padapter->stapriv;
++	struct registry_priv	 	*pregpriv = &padapter->registrypriv;
++
++
++	DBG_871X("%s, category=%d, action=%d, status=%d\n", __FUNCTION__, category, action, status);
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);
++
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++
++	//_rtw_memcpy(pwlanhdr->addr1, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr1, raddr, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr3, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN);
++
++	SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq);
++	pmlmeext->mgnt_seq++;
++	SetFrameSubType(pframe, WIFI_ACTION);
++
++	pframe += sizeof(struct rtw_ieee80211_hdr_3addr);
++	pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr);
++
++	pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen));
++
++      status = cpu_to_le16(status);
++	
++
++	if (category == 3)
++	{
++		switch (action)
++		{
++			case 0: //ADDBA req
++				do {
++					pmlmeinfo->dialogToken++;
++				} while (pmlmeinfo->dialogToken == 0);
++				pframe = rtw_set_fixed_ie(pframe, 1, &(pmlmeinfo->dialogToken), &(pattrib->pktlen));
++
++				BA_para_set = (0x1002 | ((status & 0xf) << 2)); //immediate ack & 64 buffer size
++				//sys_mib.BA_para_set = 0x0802; //immediate ack & 32 buffer size
++				BA_para_set = cpu_to_le16(BA_para_set);
++				pframe = rtw_set_fixed_ie(pframe, 2, (unsigned char *)(&(BA_para_set)), &(pattrib->pktlen));
++
++				//BA_timeout_value = 0xffff;//max: 65535 TUs(~ 65 ms)
++				BA_timeout_value = 5000;//~ 5ms
++				BA_timeout_value = cpu_to_le16(BA_timeout_value);
++				pframe = rtw_set_fixed_ie(pframe, 2, (unsigned char *)(&(BA_timeout_value)), &(pattrib->pktlen));
++
++				//if ((psta = rtw_get_stainfo(pstapriv, pmlmeinfo->network.MacAddress)) != NULL)
++				if ((psta = rtw_get_stainfo(pstapriv, raddr)) != NULL)
++				{
++					start_seq = (psta->sta_xmitpriv.txseq_tid[status & 0x07]&0xfff) + 1;
++
++					DBG_871X("BA_starting_seqctrl = %d for TID=%d\n", start_seq, status & 0x07);
++					
++					psta->BA_starting_seqctrl[status & 0x07] = start_seq;
++					
++					BA_starting_seqctrl = start_seq << 4;
++				}
++				
++				BA_starting_seqctrl = cpu_to_le16(BA_starting_seqctrl);
++				pframe = rtw_set_fixed_ie(pframe, 2, (unsigned char *)(&(BA_starting_seqctrl)), &(pattrib->pktlen));
++				break;
++
++			case 1: //ADDBA rsp
++				pframe = rtw_set_fixed_ie(pframe, 1, &(pmlmeinfo->ADDBA_req.dialog_token), &(pattrib->pktlen));
++				pframe = rtw_set_fixed_ie(pframe, 2, (unsigned char *)(&status), &(pattrib->pktlen));
++
++				//BA_para_set = cpu_to_le16((le16_to_cpu(pmlmeinfo->ADDBA_req.BA_para_set) & 0x3f) | 0x1000); //64 buffer size
++				BA_para_set = ((le16_to_cpu(pmlmeinfo->ADDBA_req.BA_para_set) & 0x3f) | 0x1000); //64 buffer size
++
++				if(pregpriv->ampdu_amsdu==0)//disabled
++					BA_para_set = cpu_to_le16(BA_para_set & ~BIT(0));
++				else if(pregpriv->ampdu_amsdu==1)//enabled
++					BA_para_set = cpu_to_le16(BA_para_set | BIT(0));
++				else //auto
++					BA_para_set = cpu_to_le16(BA_para_set);
++				
++				pframe = rtw_set_fixed_ie(pframe, 2, (unsigned char *)(&(BA_para_set)), &(pattrib->pktlen));
++				pframe = rtw_set_fixed_ie(pframe, 2, (unsigned char *)(&(pmlmeinfo->ADDBA_req.BA_timeout_value)), &(pattrib->pktlen));
++				break;
++			case 2://DELBA
++				BA_para_set = (status & 0x1F) << 3;
++				BA_para_set = cpu_to_le16(BA_para_set);				
++				pframe = rtw_set_fixed_ie(pframe, 2, (unsigned char *)(&(BA_para_set)), &(pattrib->pktlen));
++
++				reason_code = 37;//Requested from peer STA as it does not want to use the mechanism
++				reason_code = cpu_to_le16(reason_code);
++				pframe = rtw_set_fixed_ie(pframe, 2, (unsigned char *)(&(reason_code)), &(pattrib->pktlen));
++				break;
++			default:
++				break;
++		}
++	}
++
++	pattrib->last_txcmdsz = pattrib->pktlen;
++
++	dump_mgntframe(padapter, pmgntframe);
++}
++
++static void issue_action_BSSCoexistPacket(_adapter *padapter)
++{	
++	_irqL	irqL;
++	_list		*plist, *phead;
++	unsigned char category, action;
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	unsigned char				*pframe;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	unsigned short			*fctrl;
++	struct	wlan_network	*pnetwork = NULL;
++	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	_queue		*queue	= &(pmlmepriv->scanned_queue);
++	u8 InfoContent[16] = {0};
++	u8 ICS[8][15];
++	
++	if((pmlmepriv->num_FortyMHzIntolerant==0) || (pmlmepriv->num_sta_no_ht==0))
++		return;
++
++	if(_TRUE == pmlmeinfo->bwmode_updated)
++		return;
++	
++
++	DBG_871X("%s\n", __FUNCTION__);
++
++
++	category = RTW_WLAN_CATEGORY_PUBLIC;
++	action = ACT_PUBLIC_BSSCOEXIST;
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);
++
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++
++	_rtw_memcpy(pwlanhdr->addr1, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr3, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN);
++
++	SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq);
++	pmlmeext->mgnt_seq++;
++	SetFrameSubType(pframe, WIFI_ACTION);
++
++	pframe += sizeof(struct rtw_ieee80211_hdr_3addr);
++	pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr);
++
++	pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen));
++
++
++	//
++	if(pmlmepriv->num_FortyMHzIntolerant>0)
++	{
++		u8 iedata=0;
++		
++		iedata |= BIT(2);//20 MHz BSS Width Request
++
++		pframe = rtw_set_ie(pframe, EID_BSSCoexistence,  1, &iedata, &(pattrib->pktlen));
++		
++	}
++	
++
++	//
++	_rtw_memset(ICS, 0, sizeof(ICS));
++	if(pmlmepriv->num_sta_no_ht>0)
++	{	
++		int i;
++	
++		_enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++
++		phead = get_list_head(queue);
++		plist = get_next(phead);
++       
++		while(1)
++		{
++			int len;
++			u8 *p;
++			WLAN_BSSID_EX *pbss_network;
++	
++			if (rtw_end_of_queue_search(phead,plist)== _TRUE)
++				break;		
++
++			pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list);      
++		
++			plist = get_next(plist);
++
++			pbss_network = (WLAN_BSSID_EX *)&pnetwork->network;
++
++			p = rtw_get_ie(pbss_network->IEs + _FIXED_IE_LENGTH_, _HT_CAPABILITY_IE_, &len, pbss_network->IELength - _FIXED_IE_LENGTH_);
++			if((p==NULL) || (len==0))//non-HT
++			{
++				if((pbss_network->Configuration.DSConfig<=0) || (pbss_network->Configuration.DSConfig>14))
++					continue;
++				
++				ICS[0][pbss_network->Configuration.DSConfig]=1;
++				
++				if(ICS[0][0] == 0)
++					ICS[0][0] = 1;		
++			}		
++	
++		}        
++
++		_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++
++
++		for(i= 0;i<8;i++)
++		{
++			if(ICS[i][0] == 1)
++			{
++				int j, k = 0;
++				
++				InfoContent[k] = i;				
++				//SET_BSS_INTOLERANT_ELE_REG_CLASS(InfoContent,i);
++				k++;
++				
++				for(j=1;j<=14;j++)
++				{
++					if(ICS[i][j]==1)
++					{
++						if(k<16)
++						{
++							InfoContent[k] = j; //channel number
++							//SET_BSS_INTOLERANT_ELE_CHANNEL(InfoContent+k, j);
++							k++;
++						}	
++					}	
++				}	
++
++				pframe = rtw_set_ie(pframe, EID_BSSIntolerantChlReport, k, InfoContent, &(pattrib->pktlen));
++				
++			}
++			
++		}
++		
++
++	}
++		
++
++	pattrib->last_txcmdsz = pattrib->pktlen;
++
++	dump_mgntframe(padapter, pmgntframe);
++
++}
++
++unsigned int send_delba(_adapter *padapter, u8 initiator, u8 *addr)
++{
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	struct sta_info *psta = NULL;
++	//struct recv_reorder_ctrl *preorder_ctrl;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	u16 tid;
++
++	if((pmlmeinfo->state&0x03) != WIFI_FW_AP_STATE)	
++		if (!(pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS))
++			return _SUCCESS;
++	
++	psta = rtw_get_stainfo(pstapriv, addr);
++	if(psta==NULL)
++		return _SUCCESS;
++
++	//DBG_871X("%s:%s\n", __FUNCTION__, (initiator==0)?"RX_DIR":"TX_DIR");
++	
++	if(initiator==0) // recipient
++	{
++		for(tid = 0;tid<MAXTID;tid++)
++		{
++			if(psta->recvreorder_ctrl[tid].enable == _TRUE)
++			{
++				DBG_871X("rx agg disable tid(%d)\n",tid);
++				issue_action_BA(padapter, addr, RTW_WLAN_ACTION_DELBA, (((tid <<1) |initiator)&0x1F));
++				psta->recvreorder_ctrl[tid].enable = _FALSE;
++				psta->recvreorder_ctrl[tid].indicate_seq = 0xffff;
++				#ifdef DBG_RX_SEQ
++				DBG_871X("DBG_RX_SEQ %s:%d indicate_seq:%u \n", __FUNCTION__, __LINE__,
++					psta->recvreorder_ctrl[tid].indicate_seq);
++				#endif
++			}		
++		}
++	}
++	else if(initiator == 1)// originator
++	{
++		//DBG_871X("tx agg_enable_bitmap(0x%08x)\n", psta->htpriv.agg_enable_bitmap);
++		for(tid = 0;tid<MAXTID;tid++)
++		{
++			if(psta->htpriv.agg_enable_bitmap & BIT(tid))
++			{
++				DBG_871X("tx agg disable tid(%d)\n",tid);
++				issue_action_BA(padapter, addr, RTW_WLAN_ACTION_DELBA, (((tid <<1) |initiator)&0x1F) );
++				psta->htpriv.agg_enable_bitmap &= ~BIT(tid);
++				psta->htpriv.candidate_tid_bitmap &= ~BIT(tid);
++				
++			}			
++		}
++	}
++	
++	return _SUCCESS;
++	
++}
++
++unsigned int send_beacon(_adapter *padapter)
++{
++	u8	bxmitok = _FALSE;
++	int	issue=0;
++	int poll = 0;
++//#ifdef CONFIG_CONCURRENT_MODE
++	//struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	//struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	//_adapter *pbuddy_adapter = padapter->pbuddy_adapter;
++	//struct mlme_priv *pbuddy_mlmepriv = &(pbuddy_adapter->mlmepriv);
++//#endif		
++
++#ifdef CONFIG_PCI_HCI
++
++	//DBG_871X("%s\n", __FUNCTION__);
++
++	issue_beacon(padapter);
++
++	return _SUCCESS;
++
++#endif
++
++#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI)
++	u32 start = rtw_get_current_time();
++
++	rtw_hal_set_hwreg(padapter, HW_VAR_BCN_VALID, NULL);
++	do{
++		issue_beacon(padapter);
++		issue++;
++		do {
++			rtw_yield_os();
++			rtw_hal_get_hwreg(padapter, HW_VAR_BCN_VALID, (u8 *)(&bxmitok));
++			poll++;
++		}while((poll%10)!=0 && _FALSE == bxmitok && !padapter->bSurpriseRemoved && !padapter->bDriverStopped);
++
++	}while(_FALSE == bxmitok && issue<100 && !padapter->bSurpriseRemoved && !padapter->bDriverStopped);
++
++	if(padapter->bSurpriseRemoved || padapter->bDriverStopped)
++	{
++		return _FAIL;
++	}
++	if(_FALSE == bxmitok)
++	{
++		DBG_871X("%s fail! %u ms\n", __FUNCTION__, rtw_get_passing_time_ms(start));
++		return _FAIL;
++	}
++	else
++	{
++		u32 passing_time = rtw_get_passing_time_ms(start);
++
++		if(passing_time > 100 || issue > 3)
++			DBG_871X("%s success, issue:%d, poll:%d, %u ms\n", __FUNCTION__, issue, poll, rtw_get_passing_time_ms(start));
++		//else
++		//	DBG_871X("%s success, issue:%d, poll:%d, %u ms\n", __FUNCTION__, issue, poll, rtw_get_passing_time_ms(start));
++		
++		return _SUCCESS;
++	}
++
++#endif
++
++}
++
++/****************************************************************************
++
++Following are some utitity fuctions for WiFi MLME
++
++*****************************************************************************/
++
++BOOLEAN IsLegal5GChannel(
++	IN PADAPTER			Adapter,
++	IN u8			channel)
++{
++	
++	int i=0;
++	u8 Channel_5G[45] = {36,38,40,42,44,46,48,50,52,54,56,58,
++		60,62,64,100,102,104,106,108,110,112,114,116,118,120,122,
++		124,126,128,130,132,134,136,138,140,149,151,153,155,157,159,
++		161,163,165};
++	for(i=0;i<sizeof(Channel_5G);i++)
++		if(channel == Channel_5G[i])
++			return _TRUE;
++	return _FALSE;
++}
++
++void site_survey(_adapter *padapter)
++{
++	unsigned char		survey_channel = 0, val8;
++	RT_SCAN_TYPE	ScanType = SCAN_PASSIVE;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	u32 initialgain = 0;
++	u8 restore_initial_gain = 1;
++
++#ifdef CONFIG_P2P
++
++#ifdef CONFIG_CONCURRENT_MODE
++
++#ifdef CONFIG_STA_MODE_SCAN_UNDER_AP_MODE
++	u8 stay_buddy_ch = 0;
++#endif //CONFIG_STA_MODE_SCAN_UNDER_AP_MODE
++
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	PADAPTER pbuddy_adapter = padapter->pbuddy_adapter;			
++	struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++
++#endif //CONFIG_CONCURRENT_MODE
++	struct wifidirect_info *pwdinfo= &(padapter->wdinfo);
++	static unsigned char  prev_survey_channel = 0;
++	static unsigned int p2p_scan_count = 0;	
++
++
++	if ( ( pwdinfo->rx_invitereq_info.scan_op_ch_only ) || ( pwdinfo->p2p_info.scan_op_ch_only ) )
++	{
++		if ( pwdinfo->rx_invitereq_info.scan_op_ch_only )
++		{
++			survey_channel = pwdinfo->rx_invitereq_info.operation_ch[pmlmeext->sitesurvey_res.channel_idx];
++		}
++		else
++		{
++			survey_channel = pwdinfo->p2p_info.operation_ch[pmlmeext->sitesurvey_res.channel_idx];
++		}
++		ScanType = SCAN_ACTIVE;
++	}
++	else if(rtw_p2p_findphase_ex_is_social(pwdinfo))
++	{
++		//	Commented by Albert 2011/06/03
++		//	The driver is in the find phase, it should go through the social channel.
++		int ch_set_idx;
++		survey_channel = pwdinfo->social_chan[pmlmeext->sitesurvey_res.channel_idx];
++		ch_set_idx = rtw_ch_set_search_ch(pmlmeext->channel_set, survey_channel);
++		if (ch_set_idx >= 0)
++			ScanType = pmlmeext->channel_set[ch_set_idx].ScanType;
++		else
++			ScanType = SCAN_ACTIVE;
++	}
++	else
++#endif //CONFIG_P2P
++	{
++		struct rtw_ieee80211_channel *ch;
++		if (pmlmeext->sitesurvey_res.channel_idx < pmlmeext->sitesurvey_res.ch_num) {
++			ch = &pmlmeext->sitesurvey_res.ch[pmlmeext->sitesurvey_res.channel_idx];
++			survey_channel = ch->hw_value;
++			ScanType = (ch->flags & RTW_IEEE80211_CHAN_PASSIVE_SCAN) ? SCAN_PASSIVE : SCAN_ACTIVE;
++		}
++	}
++
++	if (0)
++	DBG_871X(FUNC_ADPT_FMT" ch:%u(cnt:%u,idx:%d) at %dms, %c%c%c\n"
++		, FUNC_ADPT_ARG(padapter)
++		, survey_channel
++		, pwdinfo->find_phase_state_exchange_cnt, pmlmeext->sitesurvey_res.channel_idx
++		, rtw_get_passing_time_ms(padapter->mlmepriv.scan_start_time)
++		, ScanType?'A':'P', pmlmeext->sitesurvey_res.scan_mode?'A':'P'
++		, pmlmeext->sitesurvey_res.ssid[0].SsidLength?'S':' ' 
++	);
++
++	if(survey_channel != 0)
++	{
++		//PAUSE 4-AC Queue when site_survey
++		//rtw_hal_get_hwreg(padapter, HW_VAR_TXPAUSE, (u8 *)(&val8));
++		//val8 |= 0x0f;
++		//rtw_hal_set_hwreg(padapter, HW_VAR_TXPAUSE, (u8 *)(&val8));
++#ifdef CONFIG_CONCURRENT_MODE
++#ifdef CONFIG_STA_MODE_SCAN_UNDER_AP_MODE
++		if((padapter->pbuddy_adapter->mlmeextpriv.mlmext_info.state&0x03) == WIFI_FW_AP_STATE)
++		{
++			if( pmlmeinfo->scan_cnt == RTW_SCAN_NUM_OF_CH )
++			{
++				pmlmeinfo->scan_cnt = 0;
++				survey_channel = pbuddy_mlmeext->cur_channel;
++				stay_buddy_ch = 1;
++			}
++			else 
++			{
++				if( pmlmeinfo->scan_cnt == 0 )
++					stay_buddy_ch = 2;
++				pmlmeinfo->scan_cnt++;
++			}
++		}
++#endif //CONFIG_STA_MODE_SCAN_UNDER_AP_MODE
++#endif //CONFIG_CONCURRENT_MODE
++		if(pmlmeext->sitesurvey_res.channel_idx == 0)
++		{
++			set_channel_bwmode(padapter, survey_channel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
++		}
++		else
++		{
++			SelectChannel(padapter, survey_channel);
++		}
++
++#ifdef CONFIG_STA_MODE_SCAN_UNDER_AP_MODE
++		if( stay_buddy_ch == 1 )
++		{
++			val8 = 0; //survey done
++			rtw_hal_set_hwreg(padapter, HW_VAR_MLME_SITESURVEY, (u8 *)(&val8));
++
++			if(check_buddy_mlmeinfo_state(padapter, WIFI_FW_AP_STATE) &&
++				check_buddy_fwstate(padapter, _FW_LINKED))
++			{
++				update_beacon(padapter->pbuddy_adapter, 0, NULL, _TRUE);
++			}
++		}
++		else if( stay_buddy_ch == 2 )
++		{
++			val8 = 1; //under site survey
++			rtw_hal_set_hwreg(padapter, HW_VAR_MLME_SITESURVEY, (u8 *)(&val8));
++		}
++#endif //CONFIG_STA_MODE_SCAN_UNDER_AP_MODE
++
++		if(ScanType == SCAN_ACTIVE) //obey the channel plan setting...
++		{
++			#ifdef CONFIG_P2P
++			if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_SCAN) || 
++				rtw_p2p_chk_state(pwdinfo, P2P_STATE_FIND_PHASE_SEARCH)
++			)
++			{
++				issue_probereq_p2p(padapter, NULL);
++				issue_probereq_p2p(padapter, NULL);
++				issue_probereq_p2p(padapter, NULL);
++			}
++			else
++			#endif //CONFIG_P2P
++			{
++				int i;
++				for(i=0;i<RTW_SSID_SCAN_AMOUNT;i++){
++					if(pmlmeext->sitesurvey_res.ssid[i].SsidLength) {
++						//todo: to issue two probe req???
++						issue_probereq(padapter, &(pmlmeext->sitesurvey_res.ssid[i]), NULL);
++						//rtw_msleep_os(SURVEY_TO>>1);
++						issue_probereq(padapter, &(pmlmeext->sitesurvey_res.ssid[i]), NULL);
++					} else {
++						break;
++					}
++				}
++
++				if(pmlmeext->sitesurvey_res.scan_mode == SCAN_ACTIVE) {
++					//todo: to issue two probe req???
++					issue_probereq(padapter, NULL, NULL);
++					//rtw_msleep_os(SURVEY_TO>>1);
++					issue_probereq(padapter, NULL, NULL);
++				}
++			}
++		}
++
++#ifdef CONFIG_STA_MODE_SCAN_UNDER_AP_MODE
++		if( stay_buddy_ch == 1 )
++			set_survey_timer(pmlmeext, pmlmeext->chan_scan_time * RTW_STAY_AP_CH_MILLISECOND );
++		else
++#endif //CONFIG_STA_MODE_SCAN_UNDER_AP_MODE
++			set_survey_timer(pmlmeext, pmlmeext->chan_scan_time);
++
++	}
++	else
++	{
++
++		//	channel number is 0 or this channel is not valid.
++
++#ifdef CONFIG_CONCURRENT_MODE
++		u8 cur_channel;
++		u8 cur_bwmode;
++		u8 cur_ch_offset;
++
++		if (rtw_get_ch_setting_union(padapter, &cur_channel, &cur_bwmode, &cur_ch_offset) != 0)
++		{
++			if (0)
++			DBG_871X(FUNC_ADPT_FMT" back to linked union - ch:%u, bw:%u, offset:%u\n",
++				FUNC_ADPT_ARG(padapter), cur_channel, cur_bwmode, cur_ch_offset);
++		}
++		#ifdef CONFIG_IOCTL_CFG80211
++		else if(padapter->pbuddy_adapter
++			&& pbuddy_adapter->wdinfo.driver_interface == DRIVER_CFG80211
++			&& wdev_to_priv(pbuddy_adapter->rtw_wdev)->p2p_enabled
++			&& rtw_p2p_chk_state(&pbuddy_adapter->wdinfo, P2P_STATE_LISTEN)
++			)
++		{
++			cur_channel = pbuddy_adapter->wdinfo.listen_channel;
++			cur_bwmode = pbuddy_mlmeext->cur_bwmode;
++			cur_ch_offset = pbuddy_mlmeext->cur_ch_offset;
++		}
++		#endif
++		else
++		{
++			cur_channel = pmlmeext->cur_channel;
++			cur_bwmode = pmlmeext->cur_bwmode;
++			cur_ch_offset = pmlmeext->cur_ch_offset;
++		}		
++#endif
++
++	
++#ifdef CONFIG_P2P
++		if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_SCAN) || rtw_p2p_chk_state(pwdinfo, P2P_STATE_FIND_PHASE_SEARCH))
++		{
++			if( ( pwdinfo->rx_invitereq_info.scan_op_ch_only ) || ( pwdinfo->p2p_info.scan_op_ch_only ) )
++			{
++				//	Set the find_phase_state_exchange_cnt to P2P_FINDPHASE_EX_CNT.
++				//	This will let the following flow to run the scanning end.
++				rtw_p2p_findphase_ex_set(pwdinfo, P2P_FINDPHASE_EX_MAX);
++			}
++			#ifdef CONFIG_DBG_P2P
++			DBG_871X( "[%s] find phase exchange cnt = %d\n", __FUNCTION__, pwdinfo->find_phase_state_exchange_cnt );
++			#endif
++		}
++
++		if(rtw_p2p_findphase_ex_is_needed(pwdinfo))
++		{
++			//	Set the P2P State to the listen state of find phase and set the current channel to the listen channel
++			set_channel_bwmode(padapter, pwdinfo->listen_channel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
++			rtw_p2p_set_state(pwdinfo, P2P_STATE_FIND_PHASE_LISTEN);
++			pmlmeext->sitesurvey_res.state = SCAN_DISABLE;
++
++			//turn on dynamic functions
++			Restore_DM_Func_Flag(padapter);
++			//Switch_DM_Func(padapter, DYNAMIC_FUNC_DIG|DYNAMIC_FUNC_HP|DYNAMIC_FUNC_SS, _TRUE);
++			
++			_set_timer( &pwdinfo->find_phase_timer, ( u32 ) ( ( u32 ) ( pwdinfo->listen_dwell ) * 100 ) );
++		}
++		else
++#endif //CONFIG_P2P
++		{
++
++#ifdef CONFIG_STA_MODE_SCAN_UNDER_AP_MODE
++			pmlmeinfo->scan_cnt = 0;
++#endif //CONFIG_DMP_STA_NODE_SCAN_UNDER_AP_MODE
++
++#ifdef CONFIG_ANTENNA_DIVERSITY
++			// 20100721:Interrupt scan operation here.
++			// For SW antenna diversity before link, it needs to switch to another antenna and scan again.
++			// It compares the scan result and select beter one to do connection.
++			if(rtw_hal_antdiv_before_linked(padapter))
++			{				
++				pmlmeext->sitesurvey_res.bss_cnt = 0;
++				pmlmeext->sitesurvey_res.channel_idx = -1;
++				pmlmeext->chan_scan_time = SURVEY_TO /2;			
++				set_survey_timer(pmlmeext, pmlmeext->chan_scan_time);
++				return;
++			}
++#endif
++
++#ifdef CONFIG_P2P
++			if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_SCAN) || rtw_p2p_chk_state(pwdinfo, P2P_STATE_FIND_PHASE_SEARCH))
++			{
++			#ifdef CONFIG_CONCURRENT_MODE
++				if( pwdinfo->driver_interface == DRIVER_WEXT )
++				{
++					if ( check_buddy_fwstate(padapter, _FW_LINKED ) )
++					{
++						_set_timer( &pwdinfo->ap_p2p_switch_timer, 500 );
++					}
++				}
++				rtw_p2p_set_state(pwdinfo, rtw_p2p_pre_state(pwdinfo));
++			#else
++				rtw_p2p_set_state(pwdinfo, rtw_p2p_pre_state(pwdinfo));
++			#endif
++			}
++			rtw_p2p_findphase_ex_set(pwdinfo, P2P_FINDPHASE_EX_NONE);
++#endif //CONFIG_P2P
++			
++			pmlmeext->sitesurvey_res.state = SCAN_COMPLETE;
++
++			//switch back to the original channel
++			//SelectChannel(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset);
++
++			{
++#ifdef CONFIG_CONCURRENT_MODE
++				set_channel_bwmode(padapter, cur_channel, cur_ch_offset, cur_bwmode);
++#else
++#ifdef CONFIG_DUALMAC_CONCURRENT
++				dc_set_channel_bwmode_survey_done(padapter);
++#else
++				if( pwdinfo->driver_interface == DRIVER_WEXT )
++				{
++					if( rtw_p2p_chk_state(pwdinfo, P2P_STATE_LISTEN) )
++					{
++						set_channel_bwmode(padapter, pwdinfo->listen_channel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
++					}
++					else
++						set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode);
++				}
++				else if( pwdinfo->driver_interface == DRIVER_CFG80211 )
++				{
++					set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode);
++				}
++#endif //CONFIG_DUALMAC_CONCURRENT
++#endif //CONFIG_CONCURRENT_MODE
++			}
++
++			//flush 4-AC Queue after site_survey
++			//val8 = 0;
++			//rtw_hal_set_hwreg(padapter, HW_VAR_TXPAUSE, (u8 *)(&val8));
++
++			val8 = 0; //survey done
++			rtw_hal_set_hwreg(padapter, HW_VAR_MLME_SITESURVEY, (u8 *)(&val8));
++
++			//config MSR
++			Set_MSR(padapter, (pmlmeinfo->state & 0x3));
++
++
++#ifdef CONFIG_IOCTL_CFG80211
++			if((wdev_to_priv(padapter->rtw_wdev))->p2p_enabled == _TRUE)
++			{
++				restore_initial_gain = 0;
++			}
++#endif //CONFIG_IOCTL_CFG80211
++
++			if(restore_initial_gain == 1)
++			{
++				initialgain = 0xff; //restore RX GAIN
++				rtw_hal_set_hwreg(padapter, HW_VAR_INITIAL_GAIN, (u8 *)(&initialgain));	
++			}
++
++			//turn on dynamic functions
++			Restore_DM_Func_Flag(padapter);
++			//Switch_DM_Func(padapter, DYNAMIC_FUNC_DIG|DYNAMIC_FUNC_HP|DYNAMIC_FUNC_SS, _TRUE);
++
++			if (is_client_associated_to_ap(padapter) == _TRUE)
++			{
++				issue_nulldata(padapter, NULL, 0, 3, 500);
++				
++#ifdef CONFIG_CONCURRENT_MODE
++				if(is_client_associated_to_ap(padapter->pbuddy_adapter) == _TRUE)
++				{
++					DBG_871X("adapter is surveydone(buddy_adapter is linked), issue nulldata(pwrbit=0)\n");
++					
++					issue_nulldata(padapter->pbuddy_adapter, NULL, 0, 3, 500);
++				}
++#endif	
++			}
++#ifdef CONFIG_CONCURRENT_MODE
++			else if(is_client_associated_to_ap(padapter->pbuddy_adapter) == _TRUE)
++			{
++				issue_nulldata(padapter->pbuddy_adapter, NULL, 0, 3, 500);
++			}
++#endif	
++
++			report_surveydone_event(padapter);
++
++			pmlmeext->chan_scan_time = SURVEY_TO;
++			pmlmeext->sitesurvey_res.state = SCAN_DISABLE;
++
++			issue_action_BSSCoexistPacket(padapter);
++			issue_action_BSSCoexistPacket(padapter);
++			issue_action_BSSCoexistPacket(padapter);
++
++		}
++
++#ifdef CONFIG_CONCURRENT_MODE
++		if(check_buddy_mlmeinfo_state(padapter, WIFI_FW_AP_STATE) &&
++			check_buddy_fwstate(padapter, _FW_LINKED))
++		{
++
++			DBG_871X("survey done, current CH=%d, BW=%d, offset=%d\n", cur_channel, cur_bwmode, cur_ch_offset);
++
++			DBG_871X("restart pbuddy_adapter's beacon\n");
++		
++			update_beacon(padapter->pbuddy_adapter, 0, NULL, _TRUE);
++		}
++#endif
++
++	}
++
++	return;
++
++}
++
++//collect bss info from Beacon and Probe response frames.
++u8 collect_bss_info(_adapter *padapter, union recv_frame *precv_frame, WLAN_BSSID_EX *bssid)
++{
++	int	i;
++	u32	len;
++	u8	*p;
++	u16	val16, subtype;
++	u8	*pframe = precv_frame->u.hdr.rx_data;
++	u32	packet_len = precv_frame->u.hdr.len;
++	struct registry_priv 	*pregistrypriv = &padapter->registrypriv;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	len = packet_len - sizeof(struct rtw_ieee80211_hdr_3addr);
++
++	if (len > MAX_IE_SZ)
++	{
++		//DBG_871X("IE too long for survey event\n");
++		return _FAIL;
++	}
++
++	_rtw_memset(bssid, 0, sizeof(WLAN_BSSID_EX));
++
++	subtype = GetFrameSubType(pframe);
++
++	if(subtype==WIFI_BEACON)
++		bssid->Reserved[0] = 1;
++	else
++		bssid->Reserved[0] = 0;
++		
++	bssid->Length = sizeof(WLAN_BSSID_EX) - MAX_IE_SZ + len;
++
++	//below is to copy the information element
++	bssid->IELength = len;
++	_rtw_memcpy(bssid->IEs, (pframe + sizeof(struct rtw_ieee80211_hdr_3addr)), bssid->IELength);
++
++	//get the signal strength
++	bssid->PhyInfo.SignalQuality = precv_frame->u.hdr.attrib.signal_qual;//in percentage 
++	bssid->PhyInfo.SignalStrength = precv_frame->u.hdr.attrib.signal_strength;//in percentage
++	bssid->Rssi = precv_frame->u.hdr.attrib.RecvSignalPower; // in dBM.raw data
++	
++#ifdef CONFIG_ANTENNA_DIVERSITY
++	//rtw_hal_get_hwreg(padapter, HW_VAR_CURRENT_ANTENNA, (u8 *)(&bssid->PhyInfo.Optimum_antenna));
++	rtw_hal_get_def_var(padapter, HAL_DEF_CURRENT_ANTENNA,  &bssid->PhyInfo.Optimum_antenna);
++#endif
++
++	// checking SSID
++	if ((p = rtw_get_ie(bssid->IEs + _FIXED_IE_LENGTH_, _SSID_IE_, &len, bssid->IELength - _FIXED_IE_LENGTH_)) == NULL)
++	{
++		DBG_871X("marc: cannot find SSID for survey event\n");
++		return _FAIL;
++	}
++
++	if (*(p + 1))
++	{
++		if (len > NDIS_802_11_LENGTH_SSID)
++		{
++			DBG_871X("%s()-%d: IE too long (%d) for survey event\n", __FUNCTION__, __LINE__, len);
++			return _FAIL;
++		}
++		_rtw_memcpy(bssid->Ssid.Ssid, (p + 2), *(p + 1));
++		bssid->Ssid.SsidLength = *(p + 1);
++	}
++	else
++	{
++		bssid->Ssid.SsidLength = 0;
++	}
++
++	_rtw_memset(bssid->SupportedRates, 0, NDIS_802_11_LENGTH_RATES_EX);
++
++	//checking rate info...
++	i = 0;
++	p = rtw_get_ie(bssid->IEs + _FIXED_IE_LENGTH_, _SUPPORTEDRATES_IE_, &len, bssid->IELength - _FIXED_IE_LENGTH_);
++	if (p != NULL)
++	{
++		if (len > NDIS_802_11_LENGTH_RATES_EX)
++		{
++			DBG_871X("%s()-%d: IE too long (%d) for survey event\n", __FUNCTION__, __LINE__, len);
++			return _FAIL;
++		}
++		_rtw_memcpy(bssid->SupportedRates, (p + 2), len);
++		i = len;
++	}
++
++	p = rtw_get_ie(bssid->IEs + _FIXED_IE_LENGTH_, _EXT_SUPPORTEDRATES_IE_, &len, bssid->IELength - _FIXED_IE_LENGTH_);
++	if (p != NULL)
++	{
++		if (len > (NDIS_802_11_LENGTH_RATES_EX-i))
++		{
++			DBG_871X("%s()-%d: IE too long (%d) for survey event\n", __FUNCTION__, __LINE__, len);
++			return _FAIL;
++		}
++		_rtw_memcpy(bssid->SupportedRates + i, (p + 2), len);
++	}
++
++	//todo:
++#if 0
++	if (judge_network_type(bssid->SupportedRates, (len + i)) == WIRELESS_11B)
++	{
++		bssid->NetworkTypeInUse = Ndis802_11DS;
++	}
++	else
++#endif
++	{
++		bssid->NetworkTypeInUse = Ndis802_11OFDM24;
++	}
++
++	if (bssid->IELength < 12)
++		return _FAIL;
++
++	// Checking for DSConfig
++	p = rtw_get_ie(bssid->IEs + _FIXED_IE_LENGTH_, _DSSET_IE_, &len, bssid->IELength - _FIXED_IE_LENGTH_);
++
++	bssid->Configuration.DSConfig = 0;
++	bssid->Configuration.Length = 0;
++
++	if (p)
++	{
++		bssid->Configuration.DSConfig = *(p + 2);
++	}
++	else
++	{// In 5G, some ap do not have DSSET IE
++		// checking HT info for channel
++		p = rtw_get_ie(bssid->IEs + _FIXED_IE_LENGTH_, _HT_ADD_INFO_IE_, &len, bssid->IELength - _FIXED_IE_LENGTH_);
++		if(p)
++		{
++			struct HT_info_element *HT_info = (struct HT_info_element *)(p + 2);
++			bssid->Configuration.DSConfig = HT_info->primary_channel;
++		}
++		else
++		{ // use current channel
++			bssid->Configuration.DSConfig = rtw_get_oper_ch(padapter);
++		}
++	}
++
++	_rtw_memcpy(&bssid->Configuration.BeaconPeriod, rtw_get_beacon_interval_from_ie(bssid->IEs), 2);
++	bssid->Configuration.BeaconPeriod = le32_to_cpu(bssid->Configuration.BeaconPeriod);
++
++	val16 = rtw_get_capability((WLAN_BSSID_EX *)bssid);
++
++	if (val16 & BIT(0))
++	{
++		bssid->InfrastructureMode = Ndis802_11Infrastructure;
++		_rtw_memcpy(bssid->MacAddress, GetAddr2Ptr(pframe), ETH_ALEN);
++	}
++	else
++	{
++		bssid->InfrastructureMode = Ndis802_11IBSS;
++		_rtw_memcpy(bssid->MacAddress, GetAddr3Ptr(pframe), ETH_ALEN);
++	}
++
++	if (val16 & BIT(4))
++		bssid->Privacy = 1;
++	else
++		bssid->Privacy = 0;
++
++	bssid->Configuration.ATIMWindow = 0;
++
++	//20/40 BSS Coexistence check
++	if((pregistrypriv->wifi_spec==1) && (_FALSE == pmlmeinfo->bwmode_updated))
++	{	
++		struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++		
++		p = rtw_get_ie(bssid->IEs + _FIXED_IE_LENGTH_, _HT_CAPABILITY_IE_, &len, bssid->IELength - _FIXED_IE_LENGTH_);
++		if(p && len>0)
++		{
++			struct HT_caps_element	*pHT_caps;
++			pHT_caps = (struct HT_caps_element	*)(p + 2);
++			
++			if(pHT_caps->u.HT_cap_element.HT_caps_info&BIT(14))
++			{				
++				pmlmepriv->num_FortyMHzIntolerant++;
++			}
++		}
++		else
++		{
++			pmlmepriv->num_sta_no_ht++;
++		}
++		
++	}
++
++#ifdef CONFIG_INTEL_WIDI
++	//process_intel_widi_query_or_tigger(padapter, bssid);
++	if(process_intel_widi_query_or_tigger(padapter, bssid))
++	{
++		return _FAIL;
++	}
++#endif // CONFIG_INTEL_WIDI
++
++	#if defined(DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED) & 1
++	if(strcmp(bssid->Ssid.Ssid, DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED) == 0) {
++		DBG_871X("Receiving %s("MAC_FMT", DSConfig:%u) from ch%u with ss:%3u, sq:%3u, RawRSSI:%3ld\n"
++			, bssid->Ssid.Ssid, MAC_ARG(bssid->MacAddress), bssid->Configuration.DSConfig
++			, rtw_get_oper_ch(padapter)
++			, bssid->PhyInfo.SignalStrength, bssid->PhyInfo.SignalQuality, bssid->Rssi
++		);
++	}
++	#endif
++
++	// mark bss info receving from nearby channel as SignalQuality 101
++	if(bssid->Configuration.DSConfig != rtw_get_oper_ch(padapter))
++	{
++		bssid->PhyInfo.SignalQuality= 101;
++	}
++
++	return _SUCCESS;
++}
++
++void start_create_ibss(_adapter* padapter)
++{
++	unsigned short	caps;
++	u8	val8;
++	u8	join_type;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	WLAN_BSSID_EX		*pnetwork = (WLAN_BSSID_EX*)(&(pmlmeinfo->network));
++	pmlmeext->cur_channel = (u8)pnetwork->Configuration.DSConfig;
++	pmlmeinfo->bcn_interval = get_beacon_interval(pnetwork);
++
++	//update wireless mode
++	update_wireless_mode(padapter);
++
++	//udpate capability
++	caps = rtw_get_capability((WLAN_BSSID_EX *)pnetwork);
++	update_capinfo(padapter, caps);
++	if(caps&cap_IBSS)//adhoc master
++	{
++		//set_opmode_cmd(padapter, adhoc);//removed
++
++		val8 = 0xcf;
++		rtw_hal_set_hwreg(padapter, HW_VAR_SEC_CFG, (u8 *)(&val8));
++
++		//switch channel
++		//SelectChannel(padapter, pmlmeext->cur_channel, HAL_PRIME_CHNL_OFFSET_DONT_CARE);
++		set_channel_bwmode(padapter, pmlmeext->cur_channel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
++
++		beacon_timing_control(padapter);
++
++		//set msr to WIFI_FW_ADHOC_STATE
++		pmlmeinfo->state = WIFI_FW_ADHOC_STATE;
++		Set_MSR(padapter, (pmlmeinfo->state & 0x3));
++
++		//issue beacon
++		if(send_beacon(padapter)==_FAIL)
++		{
++			RT_TRACE(_module_rtl871x_mlme_c_,_drv_err_,("issuing beacon frame fail....\n"));
++
++			report_join_res(padapter, -1);
++			pmlmeinfo->state = WIFI_FW_NULL_STATE;
++		}
++		else
++		{
++			rtw_hal_set_hwreg(padapter, HW_VAR_BSSID, padapter->registrypriv.dev_network.MacAddress);
++			join_type = 0;
++			rtw_hal_set_hwreg(padapter, HW_VAR_MLME_JOIN, (u8 *)(&join_type));
++
++			report_join_res(padapter, 1);
++			pmlmeinfo->state |= WIFI_FW_ASSOC_SUCCESS;
++		}
++	}
++	else
++	{
++		DBG_871X("start_create_ibss, invalid cap:%x\n", caps);
++		return;
++	}
++
++}
++
++void start_clnt_join(_adapter* padapter)
++{
++	unsigned short	caps;
++	u8	val8;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	WLAN_BSSID_EX		*pnetwork = (WLAN_BSSID_EX*)(&(pmlmeinfo->network));
++
++	//update wireless mode
++	update_wireless_mode(padapter);
++
++	//udpate capability
++	caps = rtw_get_capability((WLAN_BSSID_EX *)pnetwork);
++	update_capinfo(padapter, caps);
++	if (caps&cap_ESS)
++	{
++		Set_MSR(padapter, WIFI_FW_STATION_STATE);
++
++		val8 = (pmlmeinfo->auth_algo == dot11AuthAlgrthm_8021X)? 0xcc: 0xcf;
++		rtw_hal_set_hwreg(padapter, HW_VAR_SEC_CFG, (u8 *)(&val8));
++
++		#ifdef CONFIG_DEAUTH_BEFORE_CONNECT
++		// Because of AP's not receiving deauth before
++		// AP may: 1)not response auth or 2)deauth us after link is complete
++		// issue deauth before issuing auth to deal with the situation
++
++		//	Commented by Albert 2012/07/21
++		//	For the Win8 P2P connection, it will be hard to have a successful connection if this Wi-Fi doesn't connect to it.
++		{
++			#ifdef CONFIG_P2P
++			_queue *queue = &(padapter->mlmepriv.scanned_queue);
++			_list	*head = get_list_head(queue);
++			_list *pos = get_next(head);
++			struct wlan_network *scanned = NULL;
++			u8 ie_offset = 0;
++			_irqL irqL;
++			bool has_p2p_ie = _FALSE;
++
++			_enter_critical_bh(&(padapter->mlmepriv.scanned_queue.lock), &irqL);
++
++			for (pos = get_next(head);!rtw_end_of_queue_search(head, pos); pos = get_next(pos)) {
++				
++				scanned = LIST_CONTAINOR(pos, struct wlan_network, list);
++				if(scanned==NULL)
++					rtw_warn_on(1);
++
++				if (_rtw_memcmp(&(scanned->network.Ssid), &(pnetwork->Ssid), sizeof(NDIS_802_11_SSID)) == _TRUE
++					&& _rtw_memcmp(scanned->network.MacAddress, pnetwork->MacAddress, sizeof(NDIS_802_11_MAC_ADDRESS)) == _TRUE
++				) {
++					ie_offset = (scanned->network.Reserved[0] == 2? 0:12);
++					if (rtw_get_p2p_ie(scanned->network.IEs+ie_offset, scanned->network.IELength-ie_offset, NULL, NULL))
++						has_p2p_ie = _TRUE;
++					break;
++				}
++			}
++	
++			_exit_critical_bh(&(padapter->mlmepriv.scanned_queue.lock), &irqL);
++
++			if (scanned == NULL || rtw_end_of_queue_search(head, pos) || has_p2p_ie == _FALSE)
++			#endif /* CONFIG_P2P */
++				issue_deauth_ex(padapter, pnetwork->MacAddress, WLAN_REASON_DEAUTH_LEAVING, 5, 100);
++		}
++		#endif /* CONFIG_DEAUTH_BEFORE_CONNECT */
++
++		//here wait for receiving the beacon to start auth
++		//and enable a timer
++		set_link_timer(pmlmeext, decide_wait_for_beacon_timeout(pmlmeinfo->bcn_interval));
++
++		pmlmeinfo->state = WIFI_FW_AUTH_NULL | WIFI_FW_STATION_STATE;
++	}
++	else if (caps&cap_IBSS) //adhoc client
++	{
++		Set_MSR(padapter, WIFI_FW_ADHOC_STATE);
++
++		val8 = 0xcf;
++		rtw_hal_set_hwreg(padapter, HW_VAR_SEC_CFG, (u8 *)(&val8));
++
++		//switch channel
++		set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode);
++
++		beacon_timing_control(padapter);
++
++		pmlmeinfo->state = WIFI_FW_ADHOC_STATE;
++
++		report_join_res(padapter, 1);
++	}
++	else
++	{
++		//DBG_871X("marc: invalid cap:%x\n", caps);
++		return;
++	}
++
++}
++
++void start_clnt_auth(_adapter* padapter)
++{
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	_cancel_timer_ex(&pmlmeext->link_timer);
++
++	pmlmeinfo->state &= (~WIFI_FW_AUTH_NULL);
++	pmlmeinfo->state |= WIFI_FW_AUTH_STATE;
++
++	pmlmeinfo->auth_seq = 1;
++	pmlmeinfo->reauth_count = 0;
++	pmlmeinfo->reassoc_count = 0;
++	pmlmeinfo->link_count = 0;
++	pmlmeext->retry = 0;
++
++
++	issue_auth(padapter, NULL, 0);
++
++	set_link_timer(pmlmeext, REAUTH_TO);
++
++}
++
++
++void start_clnt_assoc(_adapter* padapter)
++{
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	_cancel_timer_ex(&pmlmeext->link_timer);
++
++	pmlmeinfo->state &= (~(WIFI_FW_AUTH_NULL | WIFI_FW_AUTH_STATE));
++	pmlmeinfo->state |= (WIFI_FW_AUTH_SUCCESS | WIFI_FW_ASSOC_STATE);
++
++	issue_assocreq(padapter);
++
++	set_link_timer(pmlmeext, REASSOC_TO);
++}
++
++unsigned int receive_disconnect(_adapter *padapter, unsigned char *MacAddr, unsigned short reason)
++{
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	//check A3
++	if (!(_rtw_memcmp(MacAddr, get_my_bssid(&pmlmeinfo->network), ETH_ALEN)))
++		return _SUCCESS;
++
++	DBG_871X("%s\n", __FUNCTION__);
++
++	if((pmlmeinfo->state&0x03) == WIFI_FW_STATION_STATE)
++	{
++		if (pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS)
++		{
++			pmlmeinfo->state = WIFI_FW_NULL_STATE;
++			report_del_sta_event(padapter, MacAddr, reason);
++
++		}
++		else if (pmlmeinfo->state & WIFI_FW_LINKING_STATE)
++		{
++			pmlmeinfo->state = WIFI_FW_NULL_STATE;
++			report_join_res(padapter, -2);
++		}
++	}
++
++	return _SUCCESS;
++}
++
++#ifdef CONFIG_80211D
++static void process_80211d(PADAPTER padapter, WLAN_BSSID_EX *bssid)
++{
++	struct registry_priv *pregistrypriv;
++	struct mlme_ext_priv *pmlmeext;
++	RT_CHANNEL_INFO *chplan_new;
++	u8 channel;
++	u8 i;
++
++
++	pregistrypriv = &padapter->registrypriv;
++	pmlmeext = &padapter->mlmeextpriv;
++
++	// Adjust channel plan by AP Country IE
++	if (pregistrypriv->enable80211d &&
++		(!pmlmeext->update_channel_plan_by_ap_done))
++	{
++		u8 *ie, *p;
++		u32 len;
++		RT_CHANNEL_PLAN chplan_ap;
++		RT_CHANNEL_INFO chplan_sta[MAX_CHANNEL_NUM];
++		u8 country[4];
++		u8 fcn; // first channel number
++		u8 noc; // number of channel
++		u8 j, k;
++
++		ie = rtw_get_ie(bssid->IEs + _FIXED_IE_LENGTH_, _COUNTRY_IE_, &len, bssid->IELength - _FIXED_IE_LENGTH_);
++		if (!ie) return;
++		if (len < 6) return;
++
++		ie += 2;
++		p = ie;
++		ie += len;
++
++		_rtw_memset(country, 0, 4);
++		_rtw_memcpy(country, p, 3);
++		p += 3;
++		RT_TRACE(_module_rtl871x_mlme_c_, _drv_notice_,
++				("%s: 802.11d country=%s\n", __FUNCTION__, country));
++
++		i = 0;
++		while ((ie - p) >= 3)
++		{
++			fcn = *(p++);
++			noc = *(p++);
++			p++;
++
++			for (j = 0; j < noc; j++)
++			{
++				if (fcn <= 14) channel = fcn + j; // 2.4 GHz
++				else channel = fcn + j*4; // 5 GHz
++
++				chplan_ap.Channel[i++] = channel;
++			}
++		}
++		chplan_ap.Len = i;
++
++#ifdef CONFIG_DEBUG_RTL871X
++#ifdef PLATFORM_LINUX
++		i = 0;
++		printk("%s: AP[%s] channel plan {", __func__, bssid->Ssid.Ssid);
++		while ((i < chplan_ap.Len) && (chplan_ap.Channel[i] != 0))
++		{
++			printk("%02d,", chplan_ap.Channel[i]);
++			i++;
++		}
++		printk("}\n");
++#endif
++#endif
++
++		_rtw_memcpy(chplan_sta, pmlmeext->channel_set, sizeof(chplan_sta));
++#ifdef CONFIG_DEBUG_RTL871X
++#ifdef PLATFORM_LINUX
++		i = 0;
++		printk("%s: STA channel plan {", __func__);
++		while ((i < MAX_CHANNEL_NUM) && (chplan_sta[i].ChannelNum != 0))
++		{
++			printk("%02d(%c),", chplan_sta[i].ChannelNum, chplan_sta[i].ScanType==SCAN_PASSIVE?'p':'a');
++			i++;
++		}
++		printk("}\n");
++#endif
++#endif
++
++		_rtw_memset(pmlmeext->channel_set, 0, sizeof(pmlmeext->channel_set));
++		chplan_new = pmlmeext->channel_set;
++
++		i = j = k = 0;
++		if (pregistrypriv->wireless_mode & WIRELESS_11G)
++		{
++			do {
++				if ((i == MAX_CHANNEL_NUM) ||
++					(chplan_sta[i].ChannelNum == 0) ||
++					(chplan_sta[i].ChannelNum > 14))
++					break;
++
++				if ((j == chplan_ap.Len) || (chplan_ap.Channel[j] > 14))
++					break;
++
++				if (chplan_sta[i].ChannelNum == chplan_ap.Channel[j])
++				{
++					chplan_new[k].ChannelNum = chplan_ap.Channel[j];
++					chplan_new[k].ScanType = SCAN_ACTIVE;
++					i++;
++					j++;
++					k++;
++				}
++				else if (chplan_sta[i].ChannelNum < chplan_ap.Channel[j])
++				{
++					chplan_new[k].ChannelNum = chplan_sta[i].ChannelNum;
++//					chplan_new[k].ScanType = chplan_sta[i].ScanType;
++					chplan_new[k].ScanType = SCAN_PASSIVE;
++					i++;
++					k++;
++				}
++				else if (chplan_sta[i].ChannelNum > chplan_ap.Channel[j])
++				{
++					chplan_new[k].ChannelNum = chplan_ap.Channel[j];
++					chplan_new[k].ScanType = SCAN_ACTIVE;
++					j++;
++					k++;
++				}
++			} while (1);
++
++			// change AP not support channel to Passive scan
++			while ((i < MAX_CHANNEL_NUM) &&
++				(chplan_sta[i].ChannelNum != 0) &&
++				(chplan_sta[i].ChannelNum <= 14))
++			{
++				chplan_new[k].ChannelNum = chplan_sta[i].ChannelNum;
++//				chplan_new[k].ScanType = chplan_sta[i].ScanType;
++				chplan_new[k].ScanType = SCAN_PASSIVE;
++				i++;
++				k++;
++			}
++
++			// add channel AP supported
++			while ((j < chplan_ap.Len) && (chplan_ap.Channel[j] <= 14))
++			{
++				chplan_new[k].ChannelNum = chplan_ap.Channel[j];
++				chplan_new[k].ScanType = SCAN_ACTIVE;
++				j++;
++				k++;
++			}
++		}
++		else
++		{
++			// keep original STA 2.4G channel plan
++			while ((i < MAX_CHANNEL_NUM) &&
++				(chplan_sta[i].ChannelNum != 0) &&
++				(chplan_sta[i].ChannelNum <= 14))
++			{
++				chplan_new[k].ChannelNum = chplan_sta[i].ChannelNum;
++				chplan_new[k].ScanType = chplan_sta[i].ScanType;
++				i++;
++				k++;
++			}
++
++			// skip AP 2.4G channel plan
++			while ((j < chplan_ap.Len) && (chplan_ap.Channel[j] <= 14))
++			{
++				j++;
++			}
++		}
++
++		if (pregistrypriv->wireless_mode & WIRELESS_11A)
++		{
++			do {
++				if ((i == MAX_CHANNEL_NUM) ||
++					(chplan_sta[i].ChannelNum == 0))
++					break;
++
++				if ((j == chplan_ap.Len) || (chplan_ap.Channel[j] == 0))
++					break;
++
++				if (chplan_sta[i].ChannelNum == chplan_ap.Channel[j])
++				{
++					chplan_new[k].ChannelNum = chplan_ap.Channel[j];
++					chplan_new[k].ScanType = SCAN_ACTIVE;
++					i++;
++					j++;
++					k++;
++				}
++				else if (chplan_sta[i].ChannelNum < chplan_ap.Channel[j])
++				{
++					chplan_new[k].ChannelNum = chplan_sta[i].ChannelNum;
++//					chplan_new[k].ScanType = chplan_sta[i].ScanType;
++					chplan_new[k].ScanType = SCAN_PASSIVE;
++					i++;
++					k++;
++				}
++				else if (chplan_sta[i].ChannelNum > chplan_ap.Channel[j])
++				{
++					chplan_new[k].ChannelNum = chplan_ap.Channel[j];
++					chplan_new[k].ScanType = SCAN_ACTIVE;
++					j++;
++					k++;
++				}
++			} while (1);
++
++			// change AP not support channel to Passive scan
++			while ((i < MAX_CHANNEL_NUM) && (chplan_sta[i].ChannelNum != 0))
++			{
++				chplan_new[k].ChannelNum = chplan_sta[i].ChannelNum;
++//				chplan_new[k].ScanType = chplan_sta[i].ScanType;
++				chplan_new[k].ScanType = SCAN_PASSIVE;
++				i++;
++				k++;
++			}
++
++			// add channel AP supported
++			while ((j < chplan_ap.Len) && (chplan_ap.Channel[j] != 0))
++			{
++				chplan_new[k].ChannelNum = chplan_ap.Channel[j];
++				chplan_new[k].ScanType = SCAN_ACTIVE;
++				j++;
++				k++;
++			}
++		}
++		else
++		{
++			// keep original STA 5G channel plan
++			while ((i < MAX_CHANNEL_NUM) && (chplan_sta[i].ChannelNum != 0))
++			{
++				chplan_new[k].ChannelNum = chplan_sta[i].ChannelNum;
++				chplan_new[k].ScanType = chplan_sta[i].ScanType;
++				i++;
++				k++;
++			}
++		}
++
++		pmlmeext->update_channel_plan_by_ap_done = 1;
++
++#ifdef CONFIG_DEBUG_RTL871X
++#ifdef PLATFORM_LINUX
++		k = 0;
++		printk("%s: new STA channel plan {", __func__);
++		while ((k < MAX_CHANNEL_NUM) && (chplan_new[k].ChannelNum != 0))
++		{
++			printk("%02d(%c),", chplan_new[k].ChannelNum, chplan_new[k].ScanType==SCAN_PASSIVE?'p':'c');
++			k++;
++		}
++		printk("}\n");
++#endif
++#endif
++
++#if 0
++		// recover the right channel index
++		channel = chplan_sta[pmlmeext->sitesurvey_res.channel_idx].ChannelNum;
++		k = 0;
++		while ((k < MAX_CHANNEL_NUM) && (chplan_new[k].ChannelNum != 0))
++		{
++			if (chplan_new[k].ChannelNum == channel) {
++				RT_TRACE(_module_rtl871x_mlme_c_, _drv_notice_,
++						 ("%s: change mlme_ext sitesurvey channel index from %d to %d\n",
++						  __FUNCTION__, pmlmeext->sitesurvey_res.channel_idx, k));
++				pmlmeext->sitesurvey_res.channel_idx = k;
++				break;
++			}
++			k++;
++		}
++#endif
++	}
++
++	// If channel is used by AP, set channel scan type to active
++	channel = bssid->Configuration.DSConfig;
++	chplan_new = pmlmeext->channel_set;
++	i = 0;
++	while ((i < MAX_CHANNEL_NUM) && (chplan_new[i].ChannelNum != 0))
++	{
++		if (chplan_new[i].ChannelNum == channel)
++		{
++			if (chplan_new[i].ScanType == SCAN_PASSIVE)
++			{
++				//5G Bnad 2, 3 (DFS) doesn't change to active scan
++				if(channel >= 52 && channel <= 144)
++					break;
++				
++				chplan_new[i].ScanType = SCAN_ACTIVE;
++				RT_TRACE(_module_rtl871x_mlme_c_, _drv_notice_,
++						 ("%s: change channel %d scan type from passive to active\n",
++						  __FUNCTION__, channel));
++			}
++			break;
++		}
++		i++;
++	}
++}
++#endif
++
++/****************************************************************************
++
++Following are the functions to report events
++
++*****************************************************************************/
++
++void report_survey_event(_adapter *padapter, union recv_frame *precv_frame)
++{
++	struct cmd_obj *pcmd_obj;
++	u8	*pevtcmd;
++	u32 cmdsz;
++	struct survey_event	*psurvey_evt;
++	struct C2HEvent_Header *pc2h_evt_hdr;
++	struct mlme_ext_priv *pmlmeext;
++	struct cmd_priv *pcmdpriv;
++	//u8 *pframe = precv_frame->u.hdr.rx_data;
++	//uint len = precv_frame->u.hdr.len;
++
++	if(!padapter)
++		return;
++
++	pmlmeext = &padapter->mlmeextpriv;
++	pcmdpriv = &padapter->cmdpriv;
++	
++
++	if ((pcmd_obj = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj))) == NULL)
++	{
++		return;
++	}
++
++	cmdsz = (sizeof(struct survey_event) + sizeof(struct C2HEvent_Header));
++	if ((pevtcmd = (u8*)rtw_zmalloc(cmdsz)) == NULL)
++	{
++		rtw_mfree((u8 *)pcmd_obj, sizeof(struct cmd_obj));
++		return;
++	}
++
++	_rtw_init_listhead(&pcmd_obj->list);
++
++	pcmd_obj->cmdcode = GEN_CMD_CODE(_Set_MLME_EVT);
++	pcmd_obj->cmdsz = cmdsz;
++	pcmd_obj->parmbuf = pevtcmd;
++
++	pcmd_obj->rsp = NULL;
++	pcmd_obj->rspsz  = 0;
++
++	pc2h_evt_hdr = (struct C2HEvent_Header*)(pevtcmd);
++	pc2h_evt_hdr->len = sizeof(struct survey_event);
++	pc2h_evt_hdr->ID = GEN_EVT_CODE(_Survey);
++	pc2h_evt_hdr->seq = ATOMIC_INC_RETURN(&pmlmeext->event_seq);
++
++	psurvey_evt = (struct survey_event*)(pevtcmd + sizeof(struct C2HEvent_Header));
++
++	if (collect_bss_info(padapter, precv_frame, (WLAN_BSSID_EX *)&psurvey_evt->bss) == _FAIL)
++	{
++		rtw_mfree((u8 *)pcmd_obj, sizeof(struct cmd_obj));
++		rtw_mfree((u8 *)pevtcmd, cmdsz);
++		return;
++	}
++
++#ifdef CONFIG_80211D
++	process_80211d(padapter, &psurvey_evt->bss);
++#endif
++
++	rtw_enqueue_cmd(pcmdpriv, pcmd_obj);
++
++	pmlmeext->sitesurvey_res.bss_cnt++;
++
++	return;
++
++}
++
++void report_surveydone_event(_adapter *padapter)
++{
++	struct cmd_obj *pcmd_obj;
++	u8	*pevtcmd;
++	u32 cmdsz;
++	struct surveydone_event *psurveydone_evt;
++	struct C2HEvent_Header	*pc2h_evt_hdr;
++	struct mlme_ext_priv		*pmlmeext = &padapter->mlmeextpriv;
++	struct cmd_priv *pcmdpriv = &padapter->cmdpriv;
++
++	if ((pcmd_obj = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj))) == NULL)
++	{
++		return;
++	}
++
++	cmdsz = (sizeof(struct surveydone_event) + sizeof(struct C2HEvent_Header));
++	if ((pevtcmd = (u8*)rtw_zmalloc(cmdsz)) == NULL)
++	{
++		rtw_mfree((u8 *)pcmd_obj, sizeof(struct cmd_obj));
++		return;
++	}
++
++	_rtw_init_listhead(&pcmd_obj->list);
++
++	pcmd_obj->cmdcode = GEN_CMD_CODE(_Set_MLME_EVT);
++	pcmd_obj->cmdsz = cmdsz;
++	pcmd_obj->parmbuf = pevtcmd;
++
++	pcmd_obj->rsp = NULL;
++	pcmd_obj->rspsz  = 0;
++
++	pc2h_evt_hdr = (struct C2HEvent_Header*)(pevtcmd);
++	pc2h_evt_hdr->len = sizeof(struct surveydone_event);
++	pc2h_evt_hdr->ID = GEN_EVT_CODE(_SurveyDone);
++	pc2h_evt_hdr->seq = ATOMIC_INC_RETURN(&pmlmeext->event_seq);
++
++	psurveydone_evt = (struct surveydone_event*)(pevtcmd + sizeof(struct C2HEvent_Header));
++	psurveydone_evt->bss_cnt = pmlmeext->sitesurvey_res.bss_cnt;
++
++	DBG_871X("survey done event(%x) band:%d for "ADPT_FMT"\n", psurveydone_evt->bss_cnt, padapter->setband, ADPT_ARG(padapter));
++
++	rtw_enqueue_cmd(pcmdpriv, pcmd_obj);
++
++	return;
++
++}
++
++void report_join_res(_adapter *padapter, int res)
++{
++	struct cmd_obj *pcmd_obj;
++	u8	*pevtcmd;
++	u32 cmdsz;
++	struct joinbss_event		*pjoinbss_evt;
++	struct C2HEvent_Header	*pc2h_evt_hdr;
++	struct mlme_ext_priv		*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct cmd_priv *pcmdpriv = &padapter->cmdpriv;
++
++	if ((pcmd_obj = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj))) == NULL)
++	{
++		return;
++	}
++
++	cmdsz = (sizeof(struct joinbss_event) + sizeof(struct C2HEvent_Header));
++	if ((pevtcmd = (u8*)rtw_zmalloc(cmdsz)) == NULL)
++	{
++		rtw_mfree((u8 *)pcmd_obj, sizeof(struct cmd_obj));
++		return;
++	}
++
++	_rtw_init_listhead(&pcmd_obj->list);
++
++	pcmd_obj->cmdcode = GEN_CMD_CODE(_Set_MLME_EVT);
++	pcmd_obj->cmdsz = cmdsz;
++	pcmd_obj->parmbuf = pevtcmd;
++
++	pcmd_obj->rsp = NULL;
++	pcmd_obj->rspsz  = 0;
++
++	pc2h_evt_hdr = (struct C2HEvent_Header*)(pevtcmd);
++	pc2h_evt_hdr->len = sizeof(struct joinbss_event);
++	pc2h_evt_hdr->ID = GEN_EVT_CODE(_JoinBss);
++	pc2h_evt_hdr->seq = ATOMIC_INC_RETURN(&pmlmeext->event_seq);
++
++	pjoinbss_evt = (struct joinbss_event*)(pevtcmd + sizeof(struct C2HEvent_Header));
++	_rtw_memcpy((unsigned char *)(&(pjoinbss_evt->network.network)), &(pmlmeinfo->network), sizeof(WLAN_BSSID_EX));
++	pjoinbss_evt->network.join_res 	= pjoinbss_evt->network.aid = res;
++
++	DBG_871X("report_join_res(%d)\n", res);
++	
++	
++	rtw_joinbss_event_prehandle(padapter, (u8 *)&pjoinbss_evt->network);
++	
++	
++	rtw_enqueue_cmd(pcmdpriv, pcmd_obj);
++
++	return;
++
++}
++
++void report_del_sta_event(_adapter *padapter, unsigned char* MacAddr, unsigned short reason)
++{
++	struct cmd_obj *pcmd_obj;
++	u8	*pevtcmd;
++	u32 cmdsz;
++	struct sta_info *psta;
++	int	mac_id;
++	struct stadel_event			*pdel_sta_evt;
++	struct C2HEvent_Header	*pc2h_evt_hdr;
++	struct mlme_ext_priv		*pmlmeext = &padapter->mlmeextpriv;
++	struct cmd_priv *pcmdpriv = &padapter->cmdpriv;
++
++	if ((pcmd_obj = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj))) == NULL)
++	{
++		return;
++	}
++
++	cmdsz = (sizeof(struct stadel_event) + sizeof(struct C2HEvent_Header));
++	if ((pevtcmd = (u8*)rtw_zmalloc(cmdsz)) == NULL)
++	{
++		rtw_mfree((u8 *)pcmd_obj, sizeof(struct cmd_obj));
++		return;
++	}
++
++	_rtw_init_listhead(&pcmd_obj->list);
++
++	pcmd_obj->cmdcode = GEN_CMD_CODE(_Set_MLME_EVT);
++	pcmd_obj->cmdsz = cmdsz;
++	pcmd_obj->parmbuf = pevtcmd;
++
++	pcmd_obj->rsp = NULL;
++	pcmd_obj->rspsz  = 0;
++
++	pc2h_evt_hdr = (struct C2HEvent_Header*)(pevtcmd);
++	pc2h_evt_hdr->len = sizeof(struct stadel_event);
++	pc2h_evt_hdr->ID = GEN_EVT_CODE(_DelSTA);
++	pc2h_evt_hdr->seq = ATOMIC_INC_RETURN(&pmlmeext->event_seq);
++
++	pdel_sta_evt = (struct stadel_event*)(pevtcmd + sizeof(struct C2HEvent_Header));
++	_rtw_memcpy((unsigned char *)(&(pdel_sta_evt->macaddr)), MacAddr, ETH_ALEN);
++	_rtw_memcpy((unsigned char *)(pdel_sta_evt->rsvd),(unsigned char *)(&reason),2);
++
++
++	psta = rtw_get_stainfo(&padapter->stapriv, MacAddr);
++	if(psta)
++		mac_id = (int)psta->mac_id;	
++	else
++		mac_id = (-1);
++
++	pdel_sta_evt->mac_id = mac_id;
++
++	DBG_871X("report_del_sta_event: delete STA, mac_id=%d\n", mac_id);
++
++	rtw_enqueue_cmd(pcmdpriv, pcmd_obj);
++
++	return;
++}
++
++void report_add_sta_event(_adapter *padapter, unsigned char* MacAddr, int cam_idx)
++{
++	struct cmd_obj *pcmd_obj;
++	u8	*pevtcmd;
++	u32 cmdsz;
++	struct stassoc_event		*padd_sta_evt;
++	struct C2HEvent_Header	*pc2h_evt_hdr;
++	struct mlme_ext_priv		*pmlmeext = &padapter->mlmeextpriv;
++	struct cmd_priv *pcmdpriv = &padapter->cmdpriv;
++
++	if ((pcmd_obj = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj))) == NULL)
++	{
++		return;
++	}
++
++	cmdsz = (sizeof(struct stassoc_event) + sizeof(struct C2HEvent_Header));
++	if ((pevtcmd = (u8*)rtw_zmalloc(cmdsz)) == NULL)
++	{
++		rtw_mfree((u8 *)pcmd_obj, sizeof(struct cmd_obj));
++		return;
++	}
++
++	_rtw_init_listhead(&pcmd_obj->list);
++
++	pcmd_obj->cmdcode = GEN_CMD_CODE(_Set_MLME_EVT);
++	pcmd_obj->cmdsz = cmdsz;
++	pcmd_obj->parmbuf = pevtcmd;
++
++	pcmd_obj->rsp = NULL;
++	pcmd_obj->rspsz  = 0;
++
++	pc2h_evt_hdr = (struct C2HEvent_Header*)(pevtcmd);
++	pc2h_evt_hdr->len = sizeof(struct stassoc_event);
++	pc2h_evt_hdr->ID = GEN_EVT_CODE(_AddSTA);
++	pc2h_evt_hdr->seq = ATOMIC_INC_RETURN(&pmlmeext->event_seq);
++
++	padd_sta_evt = (struct stassoc_event*)(pevtcmd + sizeof(struct C2HEvent_Header));
++	_rtw_memcpy((unsigned char *)(&(padd_sta_evt->macaddr)), MacAddr, ETH_ALEN);
++	padd_sta_evt->cam_id = cam_idx;
++
++	DBG_871X("report_add_sta_event: add STA\n");
++
++	rtw_enqueue_cmd(pcmdpriv, pcmd_obj);
++
++	return;
++}
++
++
++/****************************************************************************
++
++Following are the event callback functions
++
++*****************************************************************************/
++
++//for sta/adhoc mode
++void update_sta_info(_adapter *padapter, struct sta_info *psta)
++{
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	//ERP
++	VCS_update(padapter, psta);
++
++
++	//HT
++	if(pmlmepriv->htpriv.ht_option)
++	{
++		psta->htpriv.ht_option = _TRUE;
++
++		psta->htpriv.ampdu_enable = pmlmepriv->htpriv.ampdu_enable;
++
++		if (support_short_GI(padapter, &(pmlmeinfo->HT_caps)))
++			psta->htpriv.sgi = _TRUE;
++
++		psta->qos_option = _TRUE;
++		
++	}
++	else
++	{
++		psta->htpriv.ht_option = _FALSE;
++
++		psta->htpriv.ampdu_enable = _FALSE;
++		
++		psta->htpriv.sgi = _FALSE;
++
++		psta->qos_option = _FALSE;
++
++	}
++	
++	psta->htpriv.bwmode = pmlmeext->cur_bwmode;
++	psta->htpriv.ch_offset = pmlmeext->cur_ch_offset;
++	
++	psta->htpriv.agg_enable_bitmap = 0x0;//reset
++	psta->htpriv.candidate_tid_bitmap = 0x0;//reset
++	
++
++	//QoS
++	if(pmlmepriv->qospriv.qos_option)
++		psta->qos_option = _TRUE;
++	
++
++	psta->state = _FW_LINKED;
++
++}
++
++void mlmeext_joinbss_event_callback(_adapter *padapter, int join_res)
++{
++	struct sta_info		*psta, *psta_bmc;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	WLAN_BSSID_EX 		*cur_network = &(pmlmeinfo->network);
++	struct sta_priv		*pstapriv = &padapter->stapriv;
++	u8	join_type;
++
++	if(join_res < 0)
++	{
++		join_type = 1;
++		rtw_hal_set_hwreg(padapter, HW_VAR_MLME_JOIN, (u8 *)(&join_type));
++		rtw_hal_set_hwreg(padapter, HW_VAR_BSSID, null_addr);
++
++		//restore to initial setting.
++		update_tx_basic_rate(padapter, padapter->registrypriv.wireless_mode);
++#if 0 //temply remove
++#ifdef CONFIG_INTEL_WIDI
++#ifdef DBG_CONFIG_ERROR_DETECT
++		DBG_871X("%s(): do silentreset\n",__FUNCTION__);
++		rtw_hal_sreset_reset(padapter);
++#endif
++#endif
++#endif
++		goto exit_mlmeext_joinbss_event_callback;
++	}
++
++	if((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE)
++	{
++		//for bc/mc
++		psta_bmc = rtw_get_bcmc_stainfo(padapter);
++		if(psta_bmc)
++		{
++			pmlmeinfo->FW_sta_info[psta_bmc->mac_id].psta = psta_bmc;
++			update_bmc_sta_support_rate(padapter, psta_bmc->mac_id);
++			Update_RA_Entry(padapter, psta_bmc->mac_id);
++		}
++	}
++
++
++	//turn on dynamic functions
++	Switch_DM_Func(padapter, DYNAMIC_FUNC_DIG|DYNAMIC_FUNC_HP|DYNAMIC_FUNC_SS, _TRUE);
++
++	// update IOT-releated issue
++	update_IOT_info(padapter);
++
++	rtw_hal_set_hwreg(padapter, HW_VAR_BASIC_RATE, cur_network->SupportedRates);
++
++	//BCN interval
++	rtw_hal_set_hwreg(padapter, HW_VAR_BEACON_INTERVAL, (u8 *)(&pmlmeinfo->bcn_interval));
++
++	//udpate capability
++	update_capinfo(padapter, pmlmeinfo->capability);
++
++	//WMM, Update EDCA param
++	WMMOnAssocRsp(padapter);
++
++	//HT
++	HTOnAssocRsp(padapter);
++
++#ifndef CONFIG_CONCURRENT_MODE
++	//	Call set_channel_bwmode when the CONFIG_CONCURRENT_MODE doesn't be defined.
++	//Set cur_channel&cur_bwmode&cur_ch_offset
++	set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode);
++#endif
++
++	psta = rtw_get_stainfo(pstapriv, cur_network->MacAddress);
++	if (psta) //only for infra. mode
++	{
++		pmlmeinfo->FW_sta_info[psta->mac_id].psta = psta;
++
++		//DBG_871X("set_sta_rate\n");
++	
++		//set per sta rate after updating HT cap.
++		set_sta_rate(padapter, psta);
++	}
++
++	join_type = 2;
++	rtw_hal_set_hwreg(padapter, HW_VAR_MLME_JOIN, (u8 *)(&join_type));
++
++	if((pmlmeinfo->state&0x03) == WIFI_FW_STATION_STATE)
++	{
++		// correcting TSF
++		correct_TSF(padapter, pmlmeext);
++	
++		//set_link_timer(pmlmeext, DISCONNECT_TO);
++	}
++
++#ifdef CONFIG_LPS
++	rtw_lps_ctrl_wk_cmd(padapter, LPS_CTRL_CONNECT, 0);
++#endif
++
++exit_mlmeext_joinbss_event_callback:
++
++#ifdef CONFIG_DUALMAC_CONCURRENT
++	dc_handle_join_done(padapter, join_res);
++#endif
++#ifdef CONFIG_CONCURRENT_MODE
++	concurrent_chk_joinbss_done(padapter, join_res);
++#endif
++
++	DBG_871X("=>%s\n", __FUNCTION__);
++
++}
++
++void mlmeext_sta_add_event_callback(_adapter *padapter, struct sta_info *psta)
++{
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	u8	join_type;
++
++	DBG_871X("%s\n", __FUNCTION__);
++
++	if((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE)
++	{
++		if(pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS)//adhoc master or sta_count>1
++		{
++			//nothing to do
++		}
++		else//adhoc client
++		{
++			//update TSF Value
++			//update_TSF(pmlmeext, pframe, len);			
++
++			// correcting TSF
++			correct_TSF(padapter, pmlmeext);
++
++			//start beacon
++			if(send_beacon(padapter)==_FAIL)
++			{
++				pmlmeinfo->FW_sta_info[psta->mac_id].status = 0;
++
++				pmlmeinfo->state ^= WIFI_FW_ADHOC_STATE;
++
++				return;
++			}
++
++			pmlmeinfo->state |= WIFI_FW_ASSOC_SUCCESS;
++				
++		}
++
++		join_type = 2;
++		rtw_hal_set_hwreg(padapter, HW_VAR_MLME_JOIN, (u8 *)(&join_type));
++	}
++
++	pmlmeinfo->FW_sta_info[psta->mac_id].psta = psta;
++
++	//rate radaptive
++	Update_RA_Entry(padapter, psta->mac_id);
++
++	//update adhoc sta_info
++	update_sta_info(padapter, psta);
++
++}
++
++void mlmeext_sta_del_event_callback(_adapter *padapter)
++{
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	if (is_client_associated_to_ap(padapter) || is_IBSS_empty(padapter))
++	{
++		//set_opmode_cmd(padapter, infra_client_with_mlme);
++
++		rtw_hal_set_hwreg(padapter, HW_VAR_MLME_DISCONNECT, 0);
++		rtw_hal_set_hwreg(padapter, HW_VAR_BSSID, null_addr);
++
++		//restore to initial setting.
++		update_tx_basic_rate(padapter, padapter->registrypriv.wireless_mode);
++
++#ifdef CONFIG_DUALMAC_CONCURRENT
++		dc_set_channel_bwmode_disconnect(padapter);
++#else
++#ifdef CONFIG_CONCURRENT_MODE
++		if((check_buddy_fwstate(padapter, _FW_LINKED)) != _TRUE)
++		{
++#endif //CONFIG_CONCURRENT_MODE
++
++		//switch to the 20M Hz mode after disconnect
++		pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_20;
++		pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++
++		//SelectChannel(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset);
++		set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode);
++	
++#ifdef CONFIG_CONCURRENT_MODE
++		}
++#endif //CONFIG_CONCURRENT_MODE
++#endif //CONFIG_DUALMAC_CONCURRENT
++
++		flush_all_cam_entry(padapter);
++
++		pmlmeinfo->state = WIFI_FW_NULL_STATE;
++
++		//set MSR to no link state -> infra. mode
++		Set_MSR(padapter, _HW_STATE_STATION_);
++
++		_cancel_timer_ex(&pmlmeext->link_timer);
++
++	}
++
++}
++
++/****************************************************************************
++
++Following are the functions for the timer handlers
++
++*****************************************************************************/
++void _linked_rx_signal_strehgth_display(_adapter *padapter);
++void _linked_rx_signal_strehgth_display(_adapter *padapter)
++{
++	int	UndecoratedSmoothedPWDB;
++	
++#ifdef CONFIG_CONCURRENT_MODE
++	PADAPTER pbuddy_adapter = padapter->pbuddy_adapter;
++	DBG_871X("============ pbuddy_adapter linked status check ===================\n");
++	DBG_871X("buddy_adapter_type=%d\n", pbuddy_adapter->adapter_type);
++	DBG_871X("pbuddy_adapter pathA Rx SNRdb:%d\n",pbuddy_adapter->recvpriv.RxSNRdB[0]);
++	DBG_871X("pbuddy_adapter pathA Rx PWDB:%d\n",pbuddy_adapter->recvpriv.rxpwdb);
++	DBG_871X("pbuddy_adapter pathA Rx RSSI:%d,pathB Rx RSSI:%d\n"
++	,pbuddy_adapter->recvpriv.RxRssi[0],pbuddy_adapter->recvpriv.RxRssi[1]);
++	rtw_hal_get_def_var(pbuddy_adapter, HAL_DEF_UNDERCORATEDSMOOTHEDPWDB, &UndecoratedSmoothedPWDB);
++	DBG_871X("pbuddy_adapter UndecoratedSmoothedPWDB:%d\n",UndecoratedSmoothedPWDB);
++	DBG_871X("Rx RSSI:%d\n",pbuddy_adapter->recvpriv.rssi);
++	DBG_871X("Rx Signal_strength:%d\n",pbuddy_adapter->recvpriv.signal_strength);
++	DBG_871X("Rx Signal_qual:%d \n",pbuddy_adapter->recvpriv.signal_qual);
++	DBG_871X("============ linked status check ===================\n");
++	DBG_871X("adapter_type=%d\n", padapter->adapter_type);
++#else //CONFIG_CONCURRENT_MODE
++	DBG_871X("============ linked status check ===================\n");
++#endif //CONFIG_CONCURRENT_MODE
++	DBG_871X("pathA Rx SNRdb:%d, pathB Rx SNRdb:%d\n",padapter->recvpriv.RxSNRdB[0], padapter->recvpriv.RxSNRdB[1]);
++	DBG_871X("pathA Rx PWDB:%d\n",padapter->recvpriv.rxpwdb);
++	DBG_871X("pathA Rx RSSI:%d,pathB Rx RSSI:%d\n",padapter->recvpriv.RxRssi[0],padapter->recvpriv.RxRssi[1]);
++	rtw_hal_get_def_var(padapter, HAL_DEF_UNDERCORATEDSMOOTHEDPWDB, &UndecoratedSmoothedPWDB);
++	DBG_871X("UndecoratedSmoothedPWDB:%d\n",UndecoratedSmoothedPWDB);
++	DBG_871X("Rx RSSI:%d\n",padapter->recvpriv.rssi);
++	DBG_871X("Rx Signal_strength:%d\n",padapter->recvpriv.signal_strength);
++	DBG_871X("Rx Signal_qual:%d \n",padapter->recvpriv.signal_qual);
++	if ( check_fwstate( &padapter->mlmepriv,  _FW_LINKED ))
++	{
++		DBG_871X("bw mode: %d, channel: %d\n", padapter->mlmeextpriv.cur_bwmode, padapter->mlmeextpriv.cur_channel );
++		DBG_871X("received bytes = %d\n", (u32) (padapter->recvpriv.rx_bytes - padapter->recvpriv.last_rx_bytes ) );
++	}
++	DBG_871X("============ linked status check ===================\n");
++	DBG_871X(" DIG PATH-A(0x%02x), PATH-B(0x%02x)\n",rtw_read8(padapter,0xc50),rtw_read8(padapter,0xc58));
++	DBG_871X(" OFDM -Alarm DA2(0x%04x),DA4(0x%04x),DA6(0x%04x),DA8(0x%04x)\n",
++		rtw_read16(padapter,0xDA2),rtw_read16(padapter,0xDA4),rtw_read16(padapter,0xDA6),rtw_read16(padapter,0xDA8));
++
++	DBG_871X(" CCK -Alarm A5B(0x%02x),A5C(0x%02x)\n",rtw_read8(padapter,0xA5B),rtw_read8(padapter,0xA5C));
++	DBG_871X(" FalseAlmCnt_all(%d)\n",padapter->recvpriv.FalseAlmCnt_all);
++	
++}
++
++u8 chk_ap_is_alive(_adapter *padapter, struct sta_info *psta)
++{
++	u8 ret = _FALSE;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	#ifdef DBG_EXPIRATION_CHK
++	DBG_871X(FUNC_ADPT_FMT" rx:"STA_PKTS_FMT", beacon:%llu, probersp_to_self:%llu"
++				/*", probersp_bm:%llu, probersp_uo:%llu, probereq:%llu, BI:%u"*/
++				", retry:%u\n"
++		, FUNC_ADPT_ARG(padapter)
++		, STA_RX_PKTS_DIFF_ARG(psta)
++		, psta->sta_stats.rx_beacon_pkts - psta->sta_stats.last_rx_beacon_pkts
++		, psta->sta_stats.rx_probersp_pkts - psta->sta_stats.last_rx_probersp_pkts
++		/*, psta->sta_stats.rx_probersp_bm_pkts - psta->sta_stats.last_rx_probersp_bm_pkts
++		, psta->sta_stats.rx_probersp_uo_pkts - psta->sta_stats.last_rx_probersp_uo_pkts
++		, psta->sta_stats.rx_probereq_pkts - psta->sta_stats.last_rx_probereq_pkts
++		, pmlmeinfo->bcn_interval*/
++		, pmlmeext->retry
++	);
++
++	DBG_871X(FUNC_ADPT_FMT" tx_pkts:%llu, link_count:%u\n", FUNC_ADPT_ARG(padapter)
++		, padapter->xmitpriv.tx_pkts
++		, pmlmeinfo->link_count
++	);
++	#endif
++
++	if((sta_rx_data_pkts(psta) == sta_last_rx_data_pkts(psta))
++		&& sta_rx_beacon_pkts(psta) == sta_last_rx_beacon_pkts(psta)
++		&& sta_rx_probersp_pkts(psta) == sta_last_rx_probersp_pkts(psta)
++	)
++	{
++		ret = _FALSE;
++	}
++	else
++	{
++		ret = _TRUE;
++	}
++
++	sta_update_last_rx_pkts(psta);
++
++	return ret;
++}
++
++void linked_status_chk(_adapter *padapter)
++{
++	u32	i;
++	struct sta_info		*psta;
++	struct xmit_priv		*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct sta_priv		*pstapriv = &padapter->stapriv;
++
++	if(padapter->bRxRSSIDisplay)
++		 _linked_rx_signal_strehgth_display(padapter);
++
++	#ifdef DBG_CONFIG_ERROR_DETECT	
++	rtw_hal_sreset_linked_status_check(padapter);
++	#endif
++
++	if (is_client_associated_to_ap(padapter))
++	{
++		//linked infrastructure client mode
++
++		int tx_chk = _SUCCESS, rx_chk = _SUCCESS;
++		int rx_chk_limit;
++
++		#if defined(DBG_ROAMING_TEST)
++		rx_chk_limit = 1;
++		#elif defined(CONFIG_ACTIVE_KEEP_ALIVE_CHECK)
++		rx_chk_limit = 4;
++		#else
++		rx_chk_limit = 8;
++		#endif
++
++		// Marked by Kurt 20130715
++		// For WiDi 3.5 and later on, they don't ask WiDi sink to do roaming, so we could not check rx limit that strictly.
++		// todo: To check why rx_chk would be _FALSE under miracast session.
++		//#ifdef CONFIG_INTEL_WIDI
++		//if (padapter->mlmepriv.widi_state != INTEL_WIDI_STATE_NONE)
++		//	rx_chk_limit = 1;
++		//#endif
++		
++		if ((psta = rtw_get_stainfo(pstapriv, pmlmeinfo->network.MacAddress)) != NULL)
++		{
++			bool is_p2p_enable = _FALSE;
++			#ifdef CONFIG_P2P
++			is_p2p_enable = !rtw_p2p_chk_state(&padapter->wdinfo, P2P_STATE_NONE);
++			#endif
++			
++			if (chk_ap_is_alive(padapter, psta) == _FALSE)
++				rx_chk = _FAIL;
++
++			if (pxmitpriv->last_tx_pkts == pxmitpriv->tx_pkts)
++				tx_chk = _FAIL;
++
++			#ifdef CONFIG_ACTIVE_KEEP_ALIVE_CHECK
++			if (pmlmeext->active_keep_alive_check && (rx_chk == _FAIL || tx_chk == _FAIL)) {
++				u8 backup_oper_channel=0;
++
++				/* switch to correct channel of current network  before issue keep-alive frames */
++				if (rtw_get_oper_ch(padapter) != pmlmeext->cur_channel) {
++					backup_oper_channel = rtw_get_oper_ch(padapter);
++					SelectChannel(padapter, pmlmeext->cur_channel);
++				}
++
++				if (rx_chk != _SUCCESS)
++					issue_probereq_ex(padapter, &pmlmeinfo->network.Ssid, psta->hwaddr, 3, 1);
++
++				if ((tx_chk != _SUCCESS && pmlmeinfo->link_count++ == 0xf) || rx_chk != _SUCCESS) {
++					tx_chk = issue_nulldata(padapter, psta->hwaddr, 0, 3, 1);
++					/* if tx acked and p2p disabled, set rx_chk _SUCCESS to reset retry count */
++					if (tx_chk == _SUCCESS && !is_p2p_enable)
++						rx_chk = _SUCCESS;
++				}
++
++				/* back to the original operation channel */
++				if(backup_oper_channel>0)
++					SelectChannel(padapter, backup_oper_channel);
++
++			}
++			else
++			#endif /* CONFIG_ACTIVE_KEEP_ALIVE_CHECK */
++			{
++				if (rx_chk != _SUCCESS) {
++					if (pmlmeext->retry == 0) {
++						#ifdef DBG_EXPIRATION_CHK
++						DBG_871X("issue_probereq to trigger probersp, retry=%d\n", pmlmeext->retry);
++						#endif
++						issue_probereq(padapter, &pmlmeinfo->network.Ssid, pmlmeinfo->network.MacAddress);
++						issue_probereq(padapter, &pmlmeinfo->network.Ssid, pmlmeinfo->network.MacAddress);
++						issue_probereq(padapter, &pmlmeinfo->network.Ssid, pmlmeinfo->network.MacAddress);
++					}
++				}
++
++				if (tx_chk != _SUCCESS && pmlmeinfo->link_count++ == 0xf) {
++					#ifdef DBG_EXPIRATION_CHK
++					DBG_871X("%s issue_nulldata 0\n", __FUNCTION__);
++					#endif
++					tx_chk = issue_nulldata(padapter, NULL, 0, 1, 0);
++				}
++			}
++
++			if (rx_chk == _FAIL) {
++				pmlmeext->retry++;
++				if (pmlmeext->retry > rx_chk_limit) {
++					DBG_871X(FUNC_ADPT_FMT" disconnect or roaming\n",
++						FUNC_ADPT_ARG(padapter));
++					receive_disconnect(padapter, pmlmeinfo->network.MacAddress
++						, WLAN_REASON_EXPIRATION_CHK);
++					return;
++				}
++			} else {
++				pmlmeext->retry = 0;
++			}
++
++			if (tx_chk == _FAIL) {
++				pmlmeinfo->link_count &= 0xf;
++			} else {
++				pxmitpriv->last_tx_pkts = pxmitpriv->tx_pkts;
++				pmlmeinfo->link_count = 0;
++			}
++
++		} //end of if ((psta = rtw_get_stainfo(pstapriv, passoc_res->network.MacAddress)) != NULL)
++	}
++	else if (is_client_associated_to_ibss(padapter))
++	{
++		//linked IBSS mode
++		//for each assoc list entry to check the rx pkt counter
++		for (i = IBSS_START_MAC_ID; i < NUM_STA; i++)
++		{
++			if (pmlmeinfo->FW_sta_info[i].status == 1)
++			{
++				psta = pmlmeinfo->FW_sta_info[i].psta;
++
++				if(NULL==psta) continue;
++
++				if (pmlmeinfo->FW_sta_info[i].rx_pkt == sta_rx_pkts(psta))
++				{
++
++					if(pmlmeinfo->FW_sta_info[i].retry<3)
++					{
++						pmlmeinfo->FW_sta_info[i].retry++;
++					}
++					else
++					{
++						pmlmeinfo->FW_sta_info[i].retry = 0;
++						pmlmeinfo->FW_sta_info[i].status = 0;
++						report_del_sta_event(padapter, psta->hwaddr
++							, 65535// indicate disconnect caused by no rx
++						);
++					}	
++				}
++				else
++				{
++					pmlmeinfo->FW_sta_info[i].retry = 0;
++					pmlmeinfo->FW_sta_info[i].rx_pkt = (u32)sta_rx_pkts(psta);
++				}
++			}
++		}
++
++		//set_link_timer(pmlmeext, DISCONNECT_TO);
++
++	}
++
++}
++
++void survey_timer_hdl(_adapter *padapter)
++{
++	struct cmd_obj	*ph2c;
++	struct sitesurvey_parm	*psurveyPara;
++	struct cmd_priv					*pcmdpriv=&padapter->cmdpriv;
++	struct mlme_ext_priv 		*pmlmeext = &padapter->mlmeextpriv;
++#ifdef CONFIG_P2P
++	struct wifidirect_info *pwdinfo= &(padapter->wdinfo);
++#endif
++
++	//DBG_871X("marc: survey timer\n");
++#ifdef PLATFORM_FREEBSD
++	rtw_mtx_lock(NULL);
++	 if (callout_pending(&padapter->mlmeextpriv.survey_timer.callout)) {
++		 /* callout was reset */
++		 //mtx_unlock(&sc->sc_mtx);
++		 rtw_mtx_unlock(NULL);
++		 return;
++	 }
++	 if (!callout_active(&padapter->mlmeextpriv.survey_timer.callout)) {
++		 /* callout was stopped */
++		 //mtx_unlock(&sc->sc_mtx);
++		 rtw_mtx_unlock(NULL);
++		 return;
++	 }
++	 callout_deactivate(&padapter->mlmeextpriv.survey_timer.callout);
++
++
++#endif
++
++	//issue rtw_sitesurvey_cmd
++	if (pmlmeext->sitesurvey_res.state > SCAN_START)
++	{
++		if(pmlmeext->sitesurvey_res.state ==  SCAN_PROCESS)
++		{
++#ifdef CONFIG_STA_MODE_SCAN_UNDER_AP_MODE
++			if( padapter->mlmeextpriv.mlmext_info.scan_cnt != RTW_SCAN_NUM_OF_CH )
++#endif //CONFIG_STA_MODE_SCAN_UNDER_AP_MODE
++				pmlmeext->sitesurvey_res.channel_idx++;
++		}
++
++		if(pmlmeext->scan_abort == _TRUE)
++		{
++			#ifdef CONFIG_P2P
++			if(!rtw_p2p_chk_state(&padapter->wdinfo, P2P_STATE_NONE))
++			{
++				rtw_p2p_findphase_ex_set(pwdinfo, P2P_FINDPHASE_EX_MAX);
++				pmlmeext->sitesurvey_res.channel_idx = 3;
++				DBG_871X("%s idx:%d, cnt:%u\n", __FUNCTION__
++					, pmlmeext->sitesurvey_res.channel_idx
++					, pwdinfo->find_phase_state_exchange_cnt
++				);
++			}
++			else
++			#endif
++			{
++				pmlmeext->sitesurvey_res.channel_idx = pmlmeext->sitesurvey_res.ch_num;
++				DBG_871X("%s idx:%d\n", __FUNCTION__
++					, pmlmeext->sitesurvey_res.channel_idx
++				);
++			}
++
++			pmlmeext->scan_abort = _FALSE;//reset
++		}
++
++		if ((ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj))) == NULL)
++		{
++			goto exit_survey_timer_hdl;
++		}
++
++		if ((psurveyPara = (struct sitesurvey_parm*)rtw_zmalloc(sizeof(struct sitesurvey_parm))) == NULL)
++		{
++			rtw_mfree((unsigned char *)ph2c, sizeof(struct cmd_obj));
++			goto exit_survey_timer_hdl;
++		}
++
++		init_h2fwcmd_w_parm_no_rsp(ph2c, psurveyPara, GEN_CMD_CODE(_SiteSurvey));
++		rtw_enqueue_cmd(pcmdpriv, ph2c);
++	}
++
++
++exit_survey_timer_hdl:
++#ifdef PLATFORM_FREEBSD
++		rtw_mtx_unlock(NULL);
++#endif
++
++	return;
++}
++
++void link_timer_hdl(_adapter *padapter)
++{
++	//static unsigned int		rx_pkt = 0;
++	//static u64				tx_cnt = 0;
++	//struct xmit_priv		*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	//struct sta_priv		*pstapriv = &padapter->stapriv;
++
++#ifdef PLATFORM_FREEBSD
++	rtw_mtx_lock(NULL);
++	 if (callout_pending(&padapter->mlmeextpriv.survey_timer.callout)) {
++		 /* callout was reset */
++		 //mtx_unlock(&sc->sc_mtx);
++		 rtw_mtx_unlock(NULL);
++		 return;
++	 }
++	 if (!callout_active(&padapter->mlmeextpriv.survey_timer.callout)) {
++		 /* callout was stopped */
++		 //mtx_unlock(&sc->sc_mtx);
++		 rtw_mtx_unlock(NULL);
++		 return;
++	 }
++	 callout_deactivate(&padapter->mlmeextpriv.survey_timer.callout);
++
++	
++#endif
++
++	if (pmlmeinfo->state & WIFI_FW_AUTH_NULL)
++	{
++		DBG_871X("link_timer_hdl:no beacon while connecting\n");
++		pmlmeinfo->state = WIFI_FW_NULL_STATE;
++		report_join_res(padapter, -3);
++	}
++	else if (pmlmeinfo->state & WIFI_FW_AUTH_STATE)
++	{
++		//re-auth timer
++		if (++pmlmeinfo->reauth_count > REAUTH_LIMIT)
++		{
++			//if (pmlmeinfo->auth_algo != dot11AuthAlgrthm_Auto)
++			//{
++				pmlmeinfo->state = 0;
++				report_join_res(padapter, -1);
++				return;
++			//}
++			//else
++			//{
++			//	pmlmeinfo->auth_algo = dot11AuthAlgrthm_Shared;
++			//	pmlmeinfo->reauth_count = 0;
++			//}
++		}
++		
++		DBG_871X("link_timer_hdl: auth timeout and try again\n");
++		pmlmeinfo->auth_seq = 1;
++		issue_auth(padapter, NULL, 0);
++		set_link_timer(pmlmeext, REAUTH_TO);
++	}
++	else if (pmlmeinfo->state & WIFI_FW_ASSOC_STATE)
++	{
++		//re-assoc timer
++		if (++pmlmeinfo->reassoc_count > REASSOC_LIMIT)
++		{
++			pmlmeinfo->state = WIFI_FW_NULL_STATE;
++			report_join_res(padapter, -2);
++			return;
++		}
++
++		DBG_871X("link_timer_hdl: assoc timeout and try again\n");
++		issue_assocreq(padapter);
++		set_link_timer(pmlmeext, REASSOC_TO);
++	}
++#if 0
++	else if (is_client_associated_to_ap(padapter))
++	{
++		//linked infrastructure client mode
++		if ((psta = rtw_get_stainfo(pstapriv, pmlmeinfo->network.MacAddress)) != NULL)
++		{
++			/*to monitor whether the AP is alive or not*/
++			if (rx_pkt == psta->sta_stats.rx_pkts)
++			{
++				receive_disconnect(padapter, pmlmeinfo->network.MacAddress);
++				return;
++			}
++			else
++			{
++				rx_pkt = psta->sta_stats.rx_pkts;
++				set_link_timer(pmlmeext, DISCONNECT_TO);
++			}
++
++			//update the EDCA paramter according to the Tx/RX mode
++			update_EDCA_param(padapter);
++
++			/*to send the AP a nulldata if no frame is xmitted in order to keep alive*/
++			if (pmlmeinfo->link_count++ == 0)
++			{
++				tx_cnt = pxmitpriv->tx_pkts;
++			}
++			else if ((pmlmeinfo->link_count & 0xf) == 0)
++			{
++				if (tx_cnt == pxmitpriv->tx_pkts)
++				{
++					issue_nulldata(padapter, NULL, 0, 0, 0);
++				}
++
++				tx_cnt = pxmitpriv->tx_pkts;
++			}
++		} //end of if ((psta = rtw_get_stainfo(pstapriv, passoc_res->network.MacAddress)) != NULL)
++	}
++	else if (is_client_associated_to_ibss(padapter))
++	{
++		//linked IBSS mode
++		//for each assoc list entry to check the rx pkt counter
++		for (i = IBSS_START_MAC_ID; i < NUM_STA; i++)
++		{
++			if (pmlmeinfo->FW_sta_info[i].status == 1)
++			{
++				psta = pmlmeinfo->FW_sta_info[i].psta;
++
++				if (pmlmeinfo->FW_sta_info[i].rx_pkt == psta->sta_stats.rx_pkts)
++				{
++					pmlmeinfo->FW_sta_info[i].status = 0;
++					report_del_sta_event(padapter, psta->hwaddr);
++				}
++				else
++				{
++					pmlmeinfo->FW_sta_info[i].rx_pkt = psta->sta_stats.rx_pkts;
++				}
++			}
++		}
++
++		set_link_timer(pmlmeext, DISCONNECT_TO);
++	}
++#endif
++
++#ifdef PLATFORM_FREEBSD
++	rtw_mtx_unlock(NULL);
++#endif
++
++	return;
++}
++
++void addba_timer_hdl(struct sta_info *psta)
++{
++	struct ht_priv	*phtpriv;
++
++	if(!psta)
++		return;
++	
++	phtpriv = &psta->htpriv;
++
++	if((phtpriv->ht_option==_TRUE) && (phtpriv->ampdu_enable==_TRUE)) 
++	{
++		if(phtpriv->candidate_tid_bitmap)
++			phtpriv->candidate_tid_bitmap=0x0;
++		
++	}
++}
++
++#ifdef CONFIG_IEEE80211W
++void sa_query_timer_hdl(_adapter *padapter)
++{
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_priv * pmlmepriv = &padapter->mlmepriv;
++	_irqL irqL;
++	//disconnect
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++
++	if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
++	{
++		rtw_disassoc_cmd(padapter, 0, _TRUE);
++		rtw_indicate_disconnect(padapter);
++		rtw_free_assoc_resources(padapter, 1);	
++	}
++
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++	DBG_871X("SA query timeout disconnect\n");
++}
++#endif //CONFIG_IEEE80211W
++
++u8 NULL_hdl(_adapter *padapter, u8 *pbuf)
++{
++	return H2C_SUCCESS;
++}
++
++#ifdef CONFIG_AUTO_AP_MODE
++void rtw_start_auto_ap(_adapter *adapter)
++{
++	DBG_871X("%s\n", __FUNCTION__);
++
++	rtw_set_802_11_infrastructure_mode(adapter, Ndis802_11APMode);
++
++	rtw_setopmode_cmd(adapter, Ndis802_11APMode);
++}
++
++static int rtw_auto_ap_start_beacon(_adapter *adapter)
++{
++	int ret=0;
++	u8 *pbuf = NULL;
++	uint len;
++	u8	supportRate[16];
++	int 	sz = 0, rateLen;
++	u8 *	ie;
++	u8	wireless_mode, oper_channel;
++	u8 ssid[3] = {0}; //hidden ssid
++	u32 ssid_len = sizeof(ssid);
++	struct mlme_priv *pmlmepriv = &(adapter->mlmepriv);
++
++
++	if(check_fwstate(pmlmepriv, WIFI_AP_STATE) != _TRUE)
++		return -EINVAL;
++
++
++	len = 128;
++	pbuf = rtw_zmalloc(len);
++	if(!pbuf)
++		return -ENOMEM;
++
++
++	//generate beacon
++	ie = pbuf;
++
++	//timestamp will be inserted by hardware
++	sz += 8;
++	ie += sz;
++
++	//beacon interval : 2bytes
++	*(u16*)ie = cpu_to_le16((u16)100);//BCN_INTERVAL=100;
++	sz += 2;
++	ie += 2;
++
++	//capability info
++	*(u16*)ie = 0;
++	*(u16*)ie |= cpu_to_le16(cap_ESS);
++	*(u16*)ie |= cpu_to_le16(cap_ShortPremble);
++	//*(u16*)ie |= cpu_to_le16(cap_Privacy);
++	sz += 2;
++	ie += 2;
++
++	//SSID
++	ie = rtw_set_ie(ie, _SSID_IE_, ssid_len, ssid, &sz);
++
++	//supported rates
++	wireless_mode = WIRELESS_11BG_24N;
++	rtw_set_supported_rate(supportRate, wireless_mode) ;
++	rateLen = rtw_get_rateset_len(supportRate);
++	if (rateLen > 8)
++	{
++		ie = rtw_set_ie(ie, _SUPPORTEDRATES_IE_, 8, supportRate, &sz);
++	}
++	else
++	{
++		ie = rtw_set_ie(ie, _SUPPORTEDRATES_IE_, rateLen, supportRate, &sz);
++	}
++
++
++	//DS parameter set
++	if(check_buddy_fwstate(adapter, _FW_LINKED) &&
++		check_buddy_fwstate(adapter, WIFI_STATION_STATE))
++	{
++		PADAPTER pbuddy_adapter = adapter->pbuddy_adapter;
++		struct mlme_ext_priv *pbuddy_mlmeext  = &pbuddy_adapter->mlmeextpriv;
++
++		oper_channel = pbuddy_mlmeext->cur_channel;
++	}
++	else
++	{
++		oper_channel = adapter_to_dvobj(adapter)->oper_channel;
++	}
++	ie = rtw_set_ie(ie, _DSSET_IE_, 1, &oper_channel, &sz);
++
++	//ext supported rates
++	if (rateLen > 8)
++	{
++		ie = rtw_set_ie(ie, _EXT_SUPPORTEDRATES_IE_, (rateLen - 8), (supportRate + 8), &sz);
++	}
++
++	DBG_871X("%s, start auto ap beacon sz=%d\n", __FUNCTION__, sz);
++
++	//lunch ap mode & start to issue beacon
++	if(rtw_check_beacon_data(adapter, pbuf,  sz) == _SUCCESS)
++	{
++
++	}
++	else
++	{
++		ret = -EINVAL;
++	}
++
++
++	rtw_mfree(pbuf, len);
++
++	return ret;
++
++}
++#endif//CONFIG_AUTO_AP_MODE
++
++u8 setopmode_hdl(_adapter *padapter, u8 *pbuf)
++{
++	u8	type;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct setopmode_parm *psetop = (struct setopmode_parm *)pbuf;
++
++	if(psetop->mode == Ndis802_11APMode)
++	{
++		pmlmeinfo->state = WIFI_FW_AP_STATE;
++		type = _HW_STATE_AP_;
++#ifdef CONFIG_NATIVEAP_MLME
++		//start_ap_mode(padapter);
++#endif
++	}
++	else if(psetop->mode == Ndis802_11Infrastructure)
++	{
++		pmlmeinfo->state &= ~(BIT(0)|BIT(1));// clear state
++		pmlmeinfo->state |= WIFI_FW_STATION_STATE;//set to 	STATION_STATE
++		type = _HW_STATE_STATION_;
++	}
++	else if(psetop->mode == Ndis802_11IBSS)
++	{
++		type = _HW_STATE_ADHOC_;
++	}
++	else
++	{
++		type = _HW_STATE_NOLINK_;
++	}
++
++	rtw_hal_set_hwreg(padapter, HW_VAR_SET_OPMODE, (u8 *)(&type));
++	//Set_NETYPE0_MSR(padapter, type);
++
++#ifdef CONFIG_AUTO_AP_MODE
++	if(psetop->mode == Ndis802_11APMode)
++		rtw_auto_ap_start_beacon(padapter);
++#endif
++
++	return H2C_SUCCESS;
++	
++}
++
++u8 createbss_hdl(_adapter *padapter, u8 *pbuf)
++{
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	WLAN_BSSID_EX	*pnetwork = (WLAN_BSSID_EX*)(&(pmlmeinfo->network));
++	struct joinbss_parm *pparm = (struct joinbss_parm *)pbuf;
++	u32	initialgain;
++
++	
++	if(pparm->network.InfrastructureMode == Ndis802_11APMode)
++	{
++#ifdef CONFIG_AP_MODE
++	
++		if(pmlmeinfo->state == WIFI_FW_AP_STATE)
++		{		
++			//todo:
++			return H2C_SUCCESS;		
++		}		
++#endif
++	}
++
++	//below is for ad-hoc master
++	if(pparm->network.InfrastructureMode == Ndis802_11IBSS)
++	{
++		rtw_joinbss_reset(padapter);
++	
++		pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_20;
++		pmlmeext->cur_ch_offset= HAL_PRIME_CHNL_OFFSET_DONT_CARE;	
++		pmlmeinfo->ERP_enable = 0;
++		pmlmeinfo->WMM_enable = 0;
++		pmlmeinfo->HT_enable = 0;
++		pmlmeinfo->HT_caps_enable = 0;
++		pmlmeinfo->HT_info_enable = 0;
++		pmlmeinfo->agg_enable_bitmap = 0;
++		pmlmeinfo->candidate_tid_bitmap = 0;
++
++		//disable dynamic functions, such as high power, DIG
++		Save_DM_Func_Flag(padapter);
++		Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, _FALSE);
++
++		//config the initial gain under linking, need to write the BB registers
++		initialgain = 0x1E;
++		rtw_hal_set_hwreg(padapter, HW_VAR_INITIAL_GAIN, (u8 *)(&initialgain));
++
++		//cancel link timer 
++		_cancel_timer_ex(&pmlmeext->link_timer);
++
++		//clear CAM
++		flush_all_cam_entry(padapter);	
++
++		_rtw_memcpy(pnetwork, pbuf, FIELD_OFFSET(WLAN_BSSID_EX, IELength)); 
++		pnetwork->IELength = ((WLAN_BSSID_EX *)pbuf)->IELength;
++
++		if(pnetwork->IELength>MAX_IE_SZ)//Check pbuf->IELength
++			return H2C_PARAMETERS_ERROR;
++
++		_rtw_memcpy(pnetwork->IEs, ((WLAN_BSSID_EX *)pbuf)->IEs, pnetwork->IELength);
++	
++		start_create_ibss(padapter);
++
++	}	
++
++	return H2C_SUCCESS;
++
++}
++
++u8 join_cmd_hdl(_adapter *padapter, u8 *pbuf)
++{
++	u8	join_type;
++	PNDIS_802_11_VARIABLE_IEs	pIE;
++	struct registry_priv	*pregpriv = &padapter->registrypriv;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	WLAN_BSSID_EX		*pnetwork = (WLAN_BSSID_EX*)(&(pmlmeinfo->network));
++#ifdef CONFIG_ANTENNA_DIVERSITY
++	struct joinbss_parm	*pparm = (struct joinbss_parm *)pbuf;
++#endif //CONFIG_ANTENNA_DIVERSITY
++	u32	initialgain, i;
++	u8 cbw40_enable=0;
++	//u32	acparm;
++
++	//check already connecting to AP or not
++	if (pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS)
++	{
++		if (pmlmeinfo->state & WIFI_FW_STATION_STATE)
++		{
++			issue_deauth_ex(padapter, pnetwork->MacAddress, WLAN_REASON_DEAUTH_LEAVING, 5, 100);
++		}
++
++		pmlmeinfo->state = WIFI_FW_NULL_STATE;
++		
++		//clear CAM
++		flush_all_cam_entry(padapter);		
++		
++		_cancel_timer_ex(&pmlmeext->link_timer);
++		
++		//set MSR to nolink -> infra. mode		
++		//Set_MSR(padapter, _HW_STATE_NOLINK_);
++		Set_MSR(padapter, _HW_STATE_STATION_);	
++		
++
++		rtw_hal_set_hwreg(padapter, HW_VAR_MLME_DISCONNECT, 0);
++	}
++
++#ifdef CONFIG_ANTENNA_DIVERSITY
++	rtw_antenna_select_cmd(padapter, pparm->network.PhyInfo.Optimum_antenna, _FALSE);
++#endif
++
++	rtw_joinbss_reset(padapter);
++	
++	pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_20;
++	pmlmeext->cur_ch_offset= HAL_PRIME_CHNL_OFFSET_DONT_CARE;	
++	pmlmeinfo->ERP_enable = 0;
++	pmlmeinfo->WMM_enable = 0;
++	pmlmeinfo->HT_enable = 0;
++	pmlmeinfo->HT_caps_enable = 0;
++	pmlmeinfo->HT_info_enable = 0;
++	pmlmeinfo->agg_enable_bitmap = 0;
++	pmlmeinfo->candidate_tid_bitmap = 0;
++	pmlmeinfo->bwmode_updated = _FALSE;
++	//pmlmeinfo->assoc_AP_vendor = maxAP;
++
++	_rtw_memcpy(pnetwork, pbuf, FIELD_OFFSET(WLAN_BSSID_EX, IELength)); 
++	pnetwork->IELength = ((WLAN_BSSID_EX *)pbuf)->IELength;
++	
++	if(pnetwork->IELength>MAX_IE_SZ)//Check pbuf->IELength
++		return H2C_PARAMETERS_ERROR;	
++		
++	_rtw_memcpy(pnetwork->IEs, ((WLAN_BSSID_EX *)pbuf)->IEs, pnetwork->IELength); 
++
++	pmlmeext->cur_channel = (u8)pnetwork->Configuration.DSConfig;
++	pmlmeinfo->bcn_interval = get_beacon_interval(pnetwork);
++
++	//Check AP vendor to move rtw_joinbss_cmd()
++	//pmlmeinfo->assoc_AP_vendor = check_assoc_AP(pnetwork->IEs, pnetwork->IELength);
++
++	for (i = sizeof(NDIS_802_11_FIXED_IEs); i < pnetwork->IELength;)
++	{
++		pIE = (PNDIS_802_11_VARIABLE_IEs)(pnetwork->IEs + i);
++
++		switch (pIE->ElementID)
++		{
++			case _VENDOR_SPECIFIC_IE_://Get WMM IE.
++				if ( _rtw_memcmp(pIE->data, WMM_OUI, 4) )
++				{
++					pmlmeinfo->WMM_enable = 1;
++				}
++				break;
++
++			case _HT_CAPABILITY_IE_:	//Get HT Cap IE.
++				pmlmeinfo->HT_caps_enable = 1;
++				break;
++
++			case _HT_EXTRA_INFO_IE_:	//Get HT Info IE.
++				pmlmeinfo->HT_info_enable = 1;
++
++				//spec case only for cisco's ap because cisco's ap issue assoc rsp using mcs rate @40MHz or @20MHz	
++//#if !defined(CONFIG_CONCURRENT_MODE) && !defined(CONFIG_DUALMAC_CONCURRENT)
++//				if(pmlmeinfo->assoc_AP_vendor == ciscoAP)
++//#endif
++				{				
++					struct HT_info_element *pht_info = (struct HT_info_element *)(pIE->data);
++							
++					if( pnetwork->Configuration.DSConfig > 14 )
++					{
++						if( pregpriv->cbw40_enable & BIT(1) )
++							cbw40_enable = 1;
++					}
++					else
++						if( pregpriv->cbw40_enable & BIT(0) )
++							cbw40_enable = 1;
++						
++					if ((cbw40_enable) &&	 (pht_info->infos[0] & BIT(2)))
++					{
++						//switch to the 40M Hz mode according to the AP
++						pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_40;
++						switch (pht_info->infos[0] & 0x3)
++						{
++							case 1:
++								pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_LOWER;
++								break;
++			
++							case 3:
++								pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_UPPER;
++								break;
++				
++							default:
++								pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++								break;
++						}
++
++						DBG_871X("set ch/bw before connected\n");
++					}
++				}
++				break;
++
++			default:
++				break;
++		}
++
++		i += (pIE->Length + 2);
++	}
++#if 0
++	if (padapter->registrypriv.wifi_spec) {
++		// for WiFi test, follow WMM test plan spec
++		acparm = 0x002F431C; // VO
++		rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_VO, (u8 *)(&acparm));
++		acparm = 0x005E541C; // VI
++		rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_VI, (u8 *)(&acparm));
++		acparm = 0x0000A525; // BE
++		rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_BE, (u8 *)(&acparm));
++		acparm = 0x0000A549; // BK
++		rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_BK, (u8 *)(&acparm));
++	
++		// for WiFi test, mixed mode with intel STA under bg mode throughput issue
++		if (padapter->mlmepriv.htpriv.ht_option == _FALSE){
++			acparm = 0x00004320;
++			rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_BE, (u8 *)(&acparm));
++		}
++	}
++	else {
++		acparm = 0x002F3217; // VO
++		rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_VO, (u8 *)(&acparm));
++		acparm = 0x005E4317; // VI
++		rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_VI, (u8 *)(&acparm));
++		acparm = 0x00105320; // BE
++		rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_BE, (u8 *)(&acparm));
++		acparm = 0x0000A444; // BK
++		rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_BK, (u8 *)(&acparm));
++	}
++#endif
++
++	/* check channel, bandwidth, offset and switch */
++#ifdef CONFIG_DUALMAC_CONCURRENT
++	if(dc_handle_join_request(padapter) == _FAIL) {
++		DBG_871X("dc_handle_join_request fail !!!\n");
++		return H2C_SUCCESS;
++	}
++	set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode);
++#else //NON CONFIG_DUALMAC_CONCURRENT
++	if(rtw_chk_start_clnt_join(padapter) == _FAIL) {
++		report_join_res(padapter, (-4));
++		return H2C_SUCCESS;
++	}
++#endif
++
++	//disable dynamic functions, such as high power, DIG
++	//Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, _FALSE);
++
++	//config the initial gain under linking, need to write the BB registers
++	
++	initialgain = 0x1E;
++	rtw_hal_set_hwreg(padapter, HW_VAR_INITIAL_GAIN, (u8 *)(&initialgain));
++	
++
++	rtw_hal_set_hwreg(padapter, HW_VAR_BSSID, pmlmeinfo->network.MacAddress);
++	join_type = 0;
++	rtw_hal_set_hwreg(padapter, HW_VAR_MLME_JOIN, (u8 *)(&join_type));
++
++	//cancel link timer 
++	_cancel_timer_ex(&pmlmeext->link_timer);
++	
++	start_clnt_join(padapter);
++	
++	return H2C_SUCCESS;
++	
++}
++
++u8 disconnect_hdl(_adapter *padapter, unsigned char *pbuf)
++{
++	struct disconnect_parm *param = (struct disconnect_parm *)pbuf;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	WLAN_BSSID_EX		*pnetwork = (WLAN_BSSID_EX*)(&(pmlmeinfo->network));
++	u8	val8;
++
++	if (is_client_associated_to_ap(padapter))
++	{
++		issue_deauth_ex(padapter, pnetwork->MacAddress, WLAN_REASON_DEAUTH_LEAVING, param->deauth_timeout_ms/100, 100);
++	}
++
++	//set_opmode_cmd(padapter, infra_client_with_mlme);
++
++	//pmlmeinfo->state = WIFI_FW_NULL_STATE;
++	
++
++	rtw_hal_set_hwreg(padapter, HW_VAR_MLME_DISCONNECT, 0);
++	rtw_hal_set_hwreg(padapter, HW_VAR_BSSID, null_addr);
++
++	//restore to initial setting.
++	update_tx_basic_rate(padapter, padapter->registrypriv.wireless_mode);
++
++	if(((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) || ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE))
++	{
++		//Stop BCN
++		val8 = 0;
++		rtw_hal_set_hwreg(padapter, HW_VAR_BCN_FUNC, (u8 *)(&val8));
++	}
++
++
++	//set MSR to no link state -> infra. mode
++	Set_MSR(padapter, _HW_STATE_STATION_);
++
++	pmlmeinfo->state = WIFI_FW_NULL_STATE;
++
++#ifdef CONFIG_DUALMAC_CONCURRENT
++	dc_set_channel_bwmode_disconnect(padapter);
++#else
++#ifdef CONFIG_CONCURRENT_MODE	
++	if((check_buddy_fwstate(padapter, _FW_LINKED)) != _TRUE)
++	{
++#endif //CONFIG_CONCURRENT_MODE
++		//switch to the 20M Hz mode after disconnect
++		pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_20;
++		pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++
++		set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode);
++#ifdef CONFIG_CONCURRENT_MODE
++	}
++#endif //CONFIG_CONCURRENT_MODE
++#endif //CONFIG_DUALMAC_CONCURRENT
++
++	flush_all_cam_entry(padapter);
++		
++	_cancel_timer_ex(&pmlmeext->link_timer);
++
++	rtw_free_uc_swdec_pending_queue(padapter);
++	
++	return 	H2C_SUCCESS;
++}
++
++int rtw_scan_ch_decision(_adapter *padapter, struct rtw_ieee80211_channel *out,
++	u32 out_num, struct rtw_ieee80211_channel *in, u32 in_num)
++{
++	int i, j;
++	int scan_ch_num = 0;
++	int set_idx;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++
++	/* clear first */
++	_rtw_memset(out, 0, sizeof(struct rtw_ieee80211_channel)*out_num);
++
++	/* acquire channels from in */
++	j = 0;
++	for (i=0;i<in_num;i++) {
++
++		if (0)
++		DBG_871X(FUNC_ADPT_FMT" "CHAN_FMT"\n", FUNC_ADPT_ARG(padapter), CHAN_ARG(&in[i]));
++
++		if(in[i].hw_value && !(in[i].flags & RTW_IEEE80211_CHAN_DISABLED)
++			&& (set_idx=rtw_ch_set_search_ch(pmlmeext->channel_set, in[i].hw_value)) >=0
++			&& rtw_mlme_band_check(padapter, in[i].hw_value) == _TRUE
++		)
++		{
++			if (j >= out_num) {
++				DBG_871X_LEVEL(_drv_always_, FUNC_ADPT_FMT" out_num:%u not enough\n",
++					FUNC_ADPT_ARG(padapter), out_num);
++				break;
++			}
++
++			_rtw_memcpy(&out[j], &in[i], sizeof(struct rtw_ieee80211_channel));
++			
++			if(pmlmeext->channel_set[set_idx].ScanType == SCAN_PASSIVE)
++				out[j].flags &= RTW_IEEE80211_CHAN_PASSIVE_SCAN;
++				
++			j++;
++		}
++		if(j>=out_num)
++			break;
++	}
++	
++	/* if out is empty, use channel_set as default */
++	if(j == 0) {
++		for (i=0;i<pmlmeext->max_chan_nums;i++) {
++
++			if (0)
++			DBG_871X(FUNC_ADPT_FMT" ch:%u\n", FUNC_ADPT_ARG(padapter), pmlmeext->channel_set[i].ChannelNum);
++
++			if (rtw_mlme_band_check(padapter, pmlmeext->channel_set[i].ChannelNum) == _TRUE) {
++
++				if (j >= out_num) {
++					DBG_871X_LEVEL(_drv_always_, FUNC_ADPT_FMT" out_num:%u not enough\n",
++						FUNC_ADPT_ARG(padapter), out_num);
++					break;
++				}
++
++				out[j].hw_value = pmlmeext->channel_set[i].ChannelNum;
++			
++				if(pmlmeext->channel_set[i].ScanType == SCAN_PASSIVE)
++					out[j].flags &= RTW_IEEE80211_CHAN_PASSIVE_SCAN;
++
++				j++;
++			}
++		}
++	}
++
++	return j;
++}
++
++u8 sitesurvey_cmd_hdl(_adapter *padapter, u8 *pbuf)
++{
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct sitesurvey_parm	*pparm = (struct sitesurvey_parm *)pbuf;
++	u8	bdelayscan = _FALSE;
++	u8	val8;
++	u32	initialgain;
++	u32	i;
++	u8	write_initial_gain = 1;
++
++#ifdef CONFIG_P2P
++	struct wifidirect_info*	pwdinfo = &padapter->wdinfo;
++#endif
++
++	if (pmlmeext->sitesurvey_res.state == SCAN_DISABLE)
++	{
++#ifdef CONFIG_CONCURRENT_MODE	
++		//for first time sitesurvey_cmd
++		rtw_hal_set_hwreg(padapter, HW_VAR_CHECK_TXBUF, 0);	
++#endif //CONFIG_CONCURRENT_MODE
++		
++		pmlmeext->sitesurvey_res.state = SCAN_START;
++		pmlmeext->sitesurvey_res.bss_cnt = 0;
++		pmlmeext->sitesurvey_res.channel_idx = 0;
++
++		for(i=0;i<RTW_SSID_SCAN_AMOUNT;i++){
++			if(pparm->ssid[i].SsidLength) {
++				_rtw_memcpy(pmlmeext->sitesurvey_res.ssid[i].Ssid, pparm->ssid[i].Ssid, IW_ESSID_MAX_SIZE);
++				pmlmeext->sitesurvey_res.ssid[i].SsidLength= pparm->ssid[i].SsidLength;
++			} else {
++				pmlmeext->sitesurvey_res.ssid[i].SsidLength= 0;
++			}
++		}
++
++		pmlmeext->sitesurvey_res.ch_num = rtw_scan_ch_decision(padapter
++			, pmlmeext->sitesurvey_res.ch, RTW_CHANNEL_SCAN_AMOUNT
++			, pparm->ch, pparm->ch_num
++		);
++
++		pmlmeext->sitesurvey_res.scan_mode = pparm->scan_mode;
++
++#ifdef CONFIG_DUALMAC_CONCURRENT
++		bdelayscan = dc_handle_site_survey(padapter);
++#endif
++
++		//issue null data if associating to the AP
++		if (is_client_associated_to_ap(padapter) == _TRUE)
++		{
++			pmlmeext->sitesurvey_res.state = SCAN_TXNULL;
++
++			issue_nulldata(padapter, NULL, 1, 3, 500);
++
++#ifdef CONFIG_CONCURRENT_MODE
++			if(is_client_associated_to_ap(padapter->pbuddy_adapter) == _TRUE)
++			{
++				DBG_871X("adapter is scanning(buddy_adapter is linked), issue nulldata(pwrbit=1)\n");
++				
++				issue_nulldata(padapter->pbuddy_adapter, NULL, 1, 3, 500);
++			}
++#endif
++			bdelayscan = _TRUE;
++		}
++#ifdef CONFIG_CONCURRENT_MODE
++		else if(is_client_associated_to_ap(padapter->pbuddy_adapter) == _TRUE)
++		{
++			#ifdef CONFIG_TDLS
++			if(padapter->pbuddy_adapter->wdinfo.wfd_tdls_enable == 1)
++			{
++				issue_tunneled_probe_req(padapter->pbuddy_adapter);
++			}
++			#endif //CONFIG_TDLS
++
++			pmlmeext->sitesurvey_res.state = SCAN_TXNULL;
++
++			issue_nulldata(padapter->pbuddy_adapter, NULL, 1, 3, 500);
++
++			bdelayscan = _TRUE;			
++		}
++#endif		
++		if(bdelayscan)
++		{
++			//delay 50ms to protect nulldata(1).
++			set_survey_timer(pmlmeext, 50);
++			return H2C_SUCCESS;
++		}
++	}
++
++	if ((pmlmeext->sitesurvey_res.state == SCAN_START) || (pmlmeext->sitesurvey_res.state == SCAN_TXNULL))
++	{
++#ifdef CONFIG_FIND_BEST_CHANNEL
++#if 0
++		for (i=0; pmlmeext->channel_set[i].ChannelNum !=0; i++) {
++			pmlmeext->channel_set[i].rx_count = 0;				
++		}
++#endif
++#endif /* CONFIG_FIND_BEST_CHANNEL */
++
++		//disable dynamic functions, such as high power, DIG
++		Save_DM_Func_Flag(padapter);
++		Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, _FALSE);
++
++		//config the initial gain under scaning, need to write the BB registers
++
++#ifdef CONFIG_P2P
++#ifdef CONFIG_IOCTL_CFG80211
++		if((wdev_to_priv(padapter->rtw_wdev))->p2p_enabled == _TRUE && pwdinfo->driver_interface == DRIVER_CFG80211 )
++		{
++			write_initial_gain = 0;
++		}
++		else
++#endif //CONFIG_IOCTL_CFG80211
++		if ( !rtw_p2p_chk_state( pwdinfo, P2P_STATE_NONE ) )
++			initialgain = 0x28;
++		else
++#endif //CONFIG_P2P
++			initialgain = 0x17;
++
++		if(write_initial_gain == 1)
++			rtw_hal_set_hwreg(padapter, HW_VAR_INITIAL_GAIN, (u8 *)(&initialgain));
++
++		//set MSR to no link state
++		Set_MSR(padapter, _HW_STATE_NOLINK_);
++
++		val8 = 1; //under site survey
++		rtw_hal_set_hwreg(padapter, HW_VAR_MLME_SITESURVEY, (u8 *)(&val8));
++
++		pmlmeext->sitesurvey_res.state = SCAN_PROCESS;
++	}
++
++	site_survey(padapter);
++
++	return H2C_SUCCESS;
++	
++}
++
++u8 setauth_hdl(_adapter *padapter, unsigned char *pbuf)
++{
++	struct setauth_parm		*pparm = (struct setauth_parm *)pbuf;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	
++	if (pparm->mode < 4)
++	{
++		pmlmeinfo->auth_algo = pparm->mode;
++	}
++
++	return 	H2C_SUCCESS;
++}
++
++u8 setkey_hdl(_adapter *padapter, u8 *pbuf)
++{
++	unsigned short				ctrl;
++	struct setkey_parm		*pparm = (struct setkey_parm *)pbuf;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	unsigned char					null_sta[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
++
++	//main tx key for wep.
++	if(pparm->set_tx)
++		pmlmeinfo->key_index = pparm->keyid;
++	
++	//write cam
++	ctrl = BIT(15) | ((pparm->algorithm) << 2) | pparm->keyid;	
++
++	write_cam(padapter, pparm->keyid, ctrl, null_sta, pparm->key);
++
++	//allow multicast packets to driver
++	rtw_hal_set_hwreg(padapter, HW_VAR_ON_RCR_AM, null_addr);
++
++	return H2C_SUCCESS;
++}
++
++u8 set_stakey_hdl(_adapter *padapter, u8 *pbuf)
++{
++	u16 ctrl=0;
++	u8 cam_id;//cam_entry
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct set_stakey_parm	*pparm = (struct set_stakey_parm *)pbuf;
++#ifdef CONFIG_TDLS
++	struct tdls_info	*ptdlsinfo = &padapter->tdlsinfo;
++	struct sta_priv	*pstapriv = &padapter->stapriv;
++	struct sta_info	*psta;
++#endif //CONFIG_TDLS
++
++	//cam_entry:
++	//0~3 for default key
++	
++	//for concurrent mode (ap+sta):
++	//default key is disable, using sw encrypt/decrypt
++	//cam_entry = 4 //for sta mode (macid=0)
++	//cam_entry(macid+3) = 5 ~ N//for ap mode (aid=1~N, macid=2 ~N)
++
++	//for concurrent mode (sta+sta):
++	//default key is disable, using sw encrypt/decrypt
++	//cam_entry = 4 //mapping to macid=0
++	//cam_entry = 5 //mapping to macid=2
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if((pmlmeinfo->state&0x03) == WIFI_FW_STATION_STATE)
++	{
++		struct sta_priv	*pstapriv = &padapter->stapriv;
++		struct sta_info	*psta;
++		
++		psta = rtw_get_stainfo(pstapriv, pmlmeinfo->network.MacAddress);
++
++		if(psta && psta->mac_id==2)
++		{
++			cam_id = 5;
++		}
++		else
++		{
++			cam_id = 4;
++		}
++/*		
++		if(padapter->iface_type > PRIMARY_IFACE)
++		{
++			cam_id = 5;
++		}
++		else
++		{
++			cam_id = 4;
++		}
++*/		
++	}	
++#else
++	cam_id = 4;
++#endif
++
++
++	if((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE)
++	{
++	
++		struct sta_info *psta;
++		struct sta_priv *pstapriv = &padapter->stapriv;
++
++		if(pparm->algorithm == _NO_PRIVACY_)	// clear cam entry
++		{
++			clear_cam_entry(padapter, pparm->id);
++			return H2C_SUCCESS_RSP;
++		}
++		
++		psta = rtw_get_stainfo(pstapriv, pparm->addr);
++		if(psta)
++		{			
++			ctrl = (BIT(15) | ((pparm->algorithm) << 2));
++
++			DBG_871X("r871x_set_stakey_hdl(): enc_algorithm=%d\n", pparm->algorithm);
++
++			if((psta->mac_id<1) || (psta->mac_id>(NUM_STA-4)))
++			{
++				DBG_871X("r871x_set_stakey_hdl():set_stakey failed, mac_id(aid)=%d\n", psta->mac_id);
++				return H2C_REJECTED;
++			}	
++				 
++			cam_id = (psta->mac_id + 3);//0~3 for default key, cmd_id=macid + 3, macid=aid+1;
++
++			DBG_871X("Write CAM, mac_addr=%x:%x:%x:%x:%x:%x, cam_entry=%d\n", pparm->addr[0], 
++						pparm->addr[1], pparm->addr[2], pparm->addr[3], pparm->addr[4],
++						pparm->addr[5], cam_id);
++
++			write_cam(padapter, cam_id, ctrl, pparm->addr, pparm->key);
++	
++			return H2C_SUCCESS_RSP;
++		
++		}
++		else
++		{
++			DBG_871X("r871x_set_stakey_hdl(): sta has been free\n");
++			return H2C_REJECTED;
++		}
++		
++	}
++
++	//below for sta mode
++	
++	if(pparm->algorithm == _NO_PRIVACY_)	// clear cam entry
++	{
++		clear_cam_entry(padapter, pparm->id);
++		return H2C_SUCCESS;
++	}
++	
++	ctrl = BIT(15) | ((pparm->algorithm) << 2);	
++	
++#ifdef CONFIG_TDLS
++	if(ptdlsinfo->clear_cam!=0){
++		clear_cam_entry(padapter, ptdlsinfo->clear_cam);
++		ptdlsinfo->clear_cam=0;
++
++		return H2C_SUCCESS;
++	}
++
++	psta = rtw_get_stainfo(pstapriv, pparm->addr);//Get TDLS Peer STA
++	if( psta->tdls_sta_state&TDLS_LINKED_STATE ){
++		write_cam(padapter, psta->mac_id, ctrl, pparm->addr, pparm->key);
++	}
++	else
++#endif //CONFIG_TDLS	
++	write_cam(padapter, cam_id, ctrl, pparm->addr, pparm->key);
++
++	pmlmeinfo->enc_algo = pparm->algorithm;
++	
++	return H2C_SUCCESS;
++}
++
++u8 add_ba_hdl(_adapter *padapter, unsigned char *pbuf)
++{
++	struct addBaReq_parm 	*pparm = (struct addBaReq_parm *)pbuf;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	struct sta_info *psta = rtw_get_stainfo(&padapter->stapriv, pparm->addr);
++	
++	if(!psta)
++		return 	H2C_SUCCESS;
++		
++
++	if (((pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS) && (pmlmeinfo->HT_enable)) ||
++		((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE))
++	{
++		//pmlmeinfo->ADDBA_retry_count = 0;
++		//pmlmeinfo->candidate_tid_bitmap |= (0x1 << pparm->tid);		
++		//psta->htpriv.candidate_tid_bitmap |= BIT(pparm->tid);
++		issue_action_BA(padapter, pparm->addr, RTW_WLAN_ACTION_ADDBA_REQ, (u16)pparm->tid);		
++		//_set_timer(&pmlmeext->ADDBA_timer, ADDBA_TO);
++		_set_timer(&psta->addba_retry_timer, ADDBA_TO);
++	}
++#ifdef CONFIG_TDLS
++	else if((psta->tdls_sta_state & TDLS_LINKED_STATE)&& 
++		(psta->htpriv.ht_option==_TRUE) && 
++		(psta->htpriv.ampdu_enable==_TRUE) )
++	{
++		issue_action_BA(padapter, pparm->addr, RTW_WLAN_ACTION_ADDBA_REQ, (u16)pparm->tid);		
++		//_set_timer(&pmlmeext->ADDBA_timer, ADDBA_TO);
++		_set_timer(&psta->addba_retry_timer, ADDBA_TO);
++	}
++#endif //CONFIG
++	else
++	{		
++		psta->htpriv.candidate_tid_bitmap &= ~BIT(pparm->tid);		
++	}
++	
++	return 	H2C_SUCCESS;
++}
++
++u8 set_tx_beacon_cmd(_adapter* padapter)
++{
++	struct cmd_obj	*ph2c;
++	struct Tx_Beacon_param 	*ptxBeacon_parm;	
++	struct cmd_priv	*pcmdpriv = &(padapter->cmdpriv);
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	u8	res = _SUCCESS;
++	int len_diff = 0;
++	
++_func_enter_;	
++	
++	if ((ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj))) == NULL)
++	{
++		res= _FAIL;
++		goto exit;
++	}
++	
++	if ((ptxBeacon_parm = (struct Tx_Beacon_param *)rtw_zmalloc(sizeof(struct Tx_Beacon_param))) == NULL)
++	{
++		rtw_mfree((unsigned char *)ph2c, sizeof(struct	cmd_obj));
++		res= _FAIL;
++		goto exit;
++	}
++
++	_rtw_memcpy(&(ptxBeacon_parm->network), &(pmlmeinfo->network), sizeof(WLAN_BSSID_EX));
++	
++	len_diff = update_hidden_ssid(
++		ptxBeacon_parm->network.IEs+_BEACON_IE_OFFSET_
++		, ptxBeacon_parm->network.IELength-_BEACON_IE_OFFSET_
++		, pmlmeinfo->hidden_ssid_mode
++	);
++	ptxBeacon_parm->network.IELength += len_diff;
++		
++	init_h2fwcmd_w_parm_no_rsp(ph2c, ptxBeacon_parm, GEN_CMD_CODE(_TX_Beacon));
++
++	res = rtw_enqueue_cmd(pcmdpriv, ph2c);
++
++	
++exit:
++	
++_func_exit_;
++
++	return res;
++}
++
++
++u8 mlme_evt_hdl(_adapter *padapter, unsigned char *pbuf)
++{
++	u8 evt_code, evt_seq;
++	u16 evt_sz;
++	uint 	*peventbuf;
++	void (*event_callback)(_adapter *dev, u8 *pbuf);
++	struct evt_priv *pevt_priv = &(padapter->evtpriv);
++
++	peventbuf = (uint*)pbuf;
++	evt_sz = (u16)(*peventbuf&0xffff);
++	evt_seq = (u8)((*peventbuf>>24)&0x7f);
++	evt_code = (u8)((*peventbuf>>16)&0xff);
++	
++		
++	#ifdef CHECK_EVENT_SEQ
++	// checking event sequence...		
++	if (evt_seq != (ATOMIC_READ(&pevt_priv->event_seq) & 0x7f) )
++	{
++		RT_TRACE(_module_rtl871x_cmd_c_,_drv_info_,("Evetn Seq Error! %d vs %d\n", (evt_seq & 0x7f), (ATOMIC_READ(&pevt_priv->event_seq) & 0x7f)));
++	
++		pevt_priv->event_seq = (evt_seq+1)&0x7f;
++
++		goto _abort_event_;
++	}
++	#endif
++
++	// checking if event code is valid
++	if (evt_code >= MAX_C2HEVT)
++	{
++		RT_TRACE(_module_rtl871x_cmd_c_,_drv_err_,("\nEvent Code(%d) mismatch!\n", evt_code));
++		goto _abort_event_;
++	}
++
++	// checking if event size match the event parm size	
++	if ((wlanevents[evt_code].parmsize != 0) && 
++			(wlanevents[evt_code].parmsize != evt_sz))
++	{
++			
++		RT_TRACE(_module_rtl871x_cmd_c_,_drv_err_,("\nEvent(%d) Parm Size mismatch (%d vs %d)!\n", 
++			evt_code, wlanevents[evt_code].parmsize, evt_sz));
++		goto _abort_event_;	
++			
++	}
++
++	ATOMIC_INC(&pevt_priv->event_seq);
++
++	peventbuf += 2;
++				
++	if(peventbuf)
++	{
++		event_callback = wlanevents[evt_code].event_callback;
++		event_callback(padapter, (u8*)peventbuf);
++
++		pevt_priv->evt_done_cnt++;
++	}
++
++
++_abort_event_:
++
++
++	return H2C_SUCCESS;
++		
++}
++
++u8 h2c_msg_hdl(_adapter *padapter, unsigned char *pbuf)
++{
++	if(!pbuf)
++		return H2C_PARAMETERS_ERROR;
++
++	return H2C_SUCCESS;
++}
++
++u8 tx_beacon_hdl(_adapter *padapter, unsigned char *pbuf)
++{
++	if(send_beacon(padapter)==_FAIL)
++	{
++		DBG_871X("issue_beacon, fail!\n");
++		return H2C_PARAMETERS_ERROR;
++	}
++#ifdef CONFIG_AP_MODE
++	else //tx bc/mc frames after update TIM 
++	{	
++		_irqL irqL;
++		struct sta_info *psta_bmc;
++		_list	*xmitframe_plist, *xmitframe_phead;
++		struct xmit_frame *pxmitframe=NULL;
++		struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
++		struct sta_priv  *pstapriv = &padapter->stapriv;
++		
++		//for BC/MC Frames
++		psta_bmc = rtw_get_bcmc_stainfo(padapter);
++		if(!psta_bmc)
++			return H2C_SUCCESS;
++	
++		if((pstapriv->tim_bitmap&BIT(0)) && (psta_bmc->sleepq_len>0))
++		{				
++#ifndef CONFIG_PCI_HCI
++			rtw_msleep_os(10);// 10ms, ATIM(HIQ) Windows
++#endif
++			//_enter_critical_bh(&psta_bmc->sleep_q.lock, &irqL);
++			_enter_critical_bh(&pxmitpriv->lock, &irqL);
++
++			xmitframe_phead = get_list_head(&psta_bmc->sleep_q);
++			xmitframe_plist = get_next(xmitframe_phead);
++
++			while ((rtw_end_of_queue_search(xmitframe_phead, xmitframe_plist)) == _FALSE)
++			{			
++				pxmitframe = LIST_CONTAINOR(xmitframe_plist, struct xmit_frame, list);
++
++				xmitframe_plist = get_next(xmitframe_plist);
++
++				rtw_list_delete(&pxmitframe->list);
++
++				psta_bmc->sleepq_len--;
++				if(psta_bmc->sleepq_len>0)
++					pxmitframe->attrib.mdata = 1;
++				else
++					pxmitframe->attrib.mdata = 0;
++
++				pxmitframe->attrib.triggered=1;
++
++				pxmitframe->attrib.qsel = 0x11;//HIQ
++
++#if 0
++				_exit_critical_bh(&psta_bmc->sleep_q.lock, &irqL);
++				if(rtw_hal_xmit(padapter, pxmitframe) == _TRUE)
++				{		
++					rtw_os_xmit_complete(padapter, pxmitframe);
++				}
++				_enter_critical_bh(&psta_bmc->sleep_q.lock, &irqL);
++
++#endif
++				rtw_hal_xmitframe_enqueue(padapter, pxmitframe);
++
++				//pstapriv->tim_bitmap &= ~BIT(0);				
++		
++			}	
++	
++			//_exit_critical_bh(&psta_bmc->sleep_q.lock, &irqL);
++	               _exit_critical_bh(&pxmitpriv->lock, &irqL);
++
++		}
++
++	}
++#endif
++
++	return H2C_SUCCESS;
++	
++}
++
++void change_band_update_ie(_adapter *padapter, WLAN_BSSID_EX *pnetwork)
++{
++	u8	network_type,rate_len, total_rate_len,remainder_rate_len;
++	struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info);
++	u8	erpinfo=0x4;
++
++	//DBG_871X("%s\n", __FUNCTION__);
++
++	if(pmlmeext->cur_channel >= 36)
++	{
++		network_type = WIRELESS_11A;
++		total_rate_len = IEEE80211_NUM_OFDM_RATESLEN;
++		DBG_871X("%s(): change to 5G Band\n",__FUNCTION__);
++		rtw_remove_bcn_ie(padapter, pnetwork, _ERPINFO_IE_);
++	}
++	else
++	{
++		network_type = WIRELESS_11BG;
++		total_rate_len = IEEE80211_CCK_RATE_LEN+IEEE80211_NUM_OFDM_RATESLEN;
++		DBG_871X("%s(): change to 2.4G Band\n",__FUNCTION__);
++		rtw_add_bcn_ie(padapter, pnetwork, _ERPINFO_IE_, &erpinfo, 1);
++	}
++
++	rtw_set_supported_rate(pnetwork->SupportedRates, network_type);
++
++	UpdateBrateTbl(padapter, pnetwork->SupportedRates);
++	rtw_hal_set_hwreg(padapter, HW_VAR_BASIC_RATE, pnetwork->SupportedRates);
++
++	if(total_rate_len > 8)
++	{
++		rate_len = 8;
++		remainder_rate_len = total_rate_len - 8;
++	}
++	else
++	{
++		rate_len = total_rate_len;
++		remainder_rate_len = 0;
++	}
++
++	rtw_add_bcn_ie(padapter, pnetwork, _SUPPORTEDRATES_IE_, pnetwork->SupportedRates, rate_len);
++
++	if(remainder_rate_len)
++	{
++		rtw_add_bcn_ie(padapter, pnetwork, _EXT_SUPPORTEDRATES_IE_, (pnetwork->SupportedRates+8), remainder_rate_len);
++	}
++	else
++	{
++		rtw_remove_bcn_ie(padapter, pnetwork, _EXT_SUPPORTEDRATES_IE_);
++	}
++}
++
++
++#ifdef CONFIG_DUALMAC_CONCURRENT
++void dc_SelectChannel(_adapter *padapter, unsigned char channel)
++{
++	PADAPTER ptarget_adapter;
++
++	if( (padapter->pbuddy_adapter != NULL) && 
++		(padapter->DualMacConcurrent == _TRUE) &&
++		(padapter->adapter_type == SECONDARY_ADAPTER))
++	{
++		// only mac0 could control BB&RF
++		ptarget_adapter = padapter->pbuddy_adapter;
++	}
++	else
++	{
++		ptarget_adapter = padapter;
++	}
++
++	_enter_critical_mutex(&(adapter_to_dvobj(ptarget_adapter)->setch_mutex), NULL);
++
++	rtw_hal_set_chan(ptarget_adapter, channel);
++
++	_exit_critical_mutex(&(adapter_to_dvobj(ptarget_adapter)->setch_mutex), NULL);
++}
++
++void dc_SetBWMode(_adapter *padapter, unsigned short bwmode, unsigned char channel_offset)
++{
++	PADAPTER ptarget_adapter;
++
++	if( (padapter->pbuddy_adapter != NULL) && 
++		(padapter->DualMacConcurrent == _TRUE) &&
++		(padapter->adapter_type == SECONDARY_ADAPTER))
++	{
++		// only mac0 could control BB&RF
++		ptarget_adapter = padapter->pbuddy_adapter;
++	}
++	else
++	{
++		ptarget_adapter = padapter;
++	}
++
++	_enter_critical_mutex(&(adapter_to_dvobj(ptarget_adapter)->setbw_mutex), NULL);
++
++	rtw_hal_set_bwmode(ptarget_adapter, (HT_CHANNEL_WIDTH)bwmode, channel_offset);
++
++	_exit_critical_mutex(&(adapter_to_dvobj(ptarget_adapter)->setbw_mutex), NULL);
++}
++
++void dc_set_channel_bwmode_disconnect(_adapter *padapter)
++{
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	PADAPTER pbuddy_adapter = padapter->pbuddy_adapter;
++	struct mlme_priv *pbuddy_mlmepriv = NULL;
++
++	if(pbuddy_adapter != NULL && 
++		padapter->DualMacConcurrent == _TRUE)
++	{
++		pbuddy_mlmepriv = &(pbuddy_adapter->mlmepriv);
++		if((check_fwstate(pbuddy_mlmepriv, _FW_LINKED)) != _TRUE)
++		{
++			//switch to the 20M Hz mode after disconnect
++			pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_20;
++			pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++
++			set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode);
++		}
++	}
++	else
++	{
++		//switch to the 20M Hz mode after disconnect
++		pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_20;
++		pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++
++		set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode);
++	}
++}
++
++u8 dc_handle_join_request(_adapter *padapter)
++{
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	WLAN_BSSID_EX		*pnetwork = (WLAN_BSSID_EX*)(&(pmlmeinfo->network));
++	PADAPTER pbuddy_adapter = padapter->pbuddy_adapter;		
++	struct mlme_ext_priv *pbuddy_mlmeext = NULL;
++	struct mlme_priv	*pbuddy_mlmepriv = NULL;
++	u8	ret = _SUCCESS;
++
++	if(pbuddy_adapter != NULL && 
++		padapter->DualMacConcurrent == _TRUE)
++	{
++		pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++		pbuddy_mlmepriv = &(pbuddy_adapter->mlmepriv);
++
++		if(pmlmeext->cur_channel != pbuddy_mlmeext->cur_channel ||
++			pmlmeext->cur_bwmode != pbuddy_mlmeext->cur_bwmode ||
++			pmlmeext->cur_ch_offset != pbuddy_mlmeext->cur_ch_offset)
++		{
++			if((check_fwstate(pbuddy_mlmepriv, WIFI_AP_STATE)) == _TRUE)
++			{
++				//issue deauth to all stas if if2 is at ap mode
++				rtw_sta_flush(pbuddy_adapter);
++
++				//rtw_hal_set_hwreg(padapter, HW_VAR_CHECK_TXBUF, 0);
++				rtw_hal_set_hwreg(pbuddy_adapter, HW_VAR_CHECK_TXBUF, 0);
++			}
++			else if(check_fwstate(pbuddy_mlmepriv, _FW_LINKED) == _TRUE)
++			{
++				if(pmlmeext->cur_channel == pbuddy_mlmeext->cur_channel)
++				{
++					// HT_CHANNEL_WIDTH_40 or HT_CHANNEL_WIDTH_20 but channel offset is different
++					if((pmlmeext->cur_bwmode == pbuddy_mlmeext->cur_bwmode) &&
++						(pmlmeext->cur_ch_offset != pbuddy_mlmeext->cur_ch_offset) )
++					{
++						report_join_res(padapter, -4);
++						ret = _FAIL;
++					}
++				}
++				else
++				{
++					report_join_res(padapter, -4);
++					ret = _FAIL;
++				}
++			}
++		}
++		else	 if (is_client_associated_to_ap(pbuddy_adapter) == _TRUE)
++		{
++			issue_nulldata(pbuddy_adapter, NULL, 1, 0, 0);
++		}
++	}
++
++	return ret;
++}
++
++void dc_handle_join_done(_adapter *padapter, u8 join_res)
++{
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	PADAPTER pbuddy_adapter = padapter->pbuddy_adapter;
++	struct mlme_priv *pbuddy_mlmepriv = NULL;
++	struct mlme_ext_priv *pbuddy_mlmeext = NULL;
++	struct mlme_ext_info *pbuddy_mlmeinfo = NULL;
++	WLAN_BSSID_EX *pbuddy_network_mlmeext = NULL;
++	u8	change_band = _FALSE;
++
++
++	if(pbuddy_adapter != NULL && 
++		padapter->DualMacConcurrent == _TRUE)
++	{
++		pbuddy_mlmepriv = &(pbuddy_adapter->mlmepriv);
++		pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++		pbuddy_mlmeinfo = &(pbuddy_mlmeext->mlmext_info);
++		pbuddy_network_mlmeext = &(pbuddy_mlmeinfo->network);
++	
++		if(((pbuddy_mlmeinfo->state&0x03) == WIFI_FW_AP_STATE) &&
++				check_fwstate(pbuddy_mlmepriv, _FW_LINKED))
++		{
++			//restart and update beacon
++			DBG_871X("after join, current adapter, CH=%d, BW=%d, offset=%d\n", pmlmeext->cur_channel, pmlmeext->cur_bwmode, pmlmeext->cur_ch_offset);
++
++			if(join_res >= 0)
++			{
++				u8 *p;
++				int	ie_len;
++				struct HT_info_element *pht_info=NULL;
++
++				if((pbuddy_mlmeext->cur_channel <= 14 && pmlmeext->cur_channel >= 36) ||
++					(pbuddy_mlmeext->cur_channel >= 36 && pmlmeext->cur_channel <= 14))
++				{
++					change_band = _TRUE;
++				}
++
++				//sync channel/bwmode/ch_offset with another adapter
++				pbuddy_mlmeext->cur_channel = pmlmeext->cur_channel;
++				
++				if(pbuddy_mlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40)
++				{
++					p = rtw_get_ie((pbuddy_network_mlmeext->IEs + sizeof(NDIS_802_11_FIXED_IEs)), _HT_ADD_INFO_IE_, &ie_len, (pbuddy_network_mlmeext->IELength - sizeof(NDIS_802_11_FIXED_IEs)));
++					if( p && ie_len)
++					{
++						pht_info = (struct HT_info_element *)(p+2);
++						pht_info->infos[0] &= ~(BIT(0)|BIT(1)); //no secondary channel is present
++					}	
++				
++					if(pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40)
++					{
++						pbuddy_mlmeext->cur_ch_offset = pmlmeext->cur_ch_offset;
++
++						//to update cur_ch_offset value in beacon
++						if( pht_info )
++						{
++							switch(pmlmeext->cur_ch_offset)
++							{
++								case HAL_PRIME_CHNL_OFFSET_LOWER:
++									pht_info->infos[0] |= 0x1;
++									break;
++								case HAL_PRIME_CHNL_OFFSET_UPPER:
++									pht_info->infos[0] |= 0x3;
++									break;
++								case HAL_PRIME_CHNL_OFFSET_DONT_CARE:							
++								default:							
++									break;					
++							}
++						}
++					}
++					else if(pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_20)
++					{
++						pbuddy_mlmeext->cur_bwmode = HT_CHANNEL_WIDTH_20;
++						pbuddy_mlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++
++						if(pmlmeext->cur_channel>0 && pmlmeext->cur_channel<5)
++						{
++							if(pht_info)
++								pht_info->infos[0] |= 0x1;
++
++							pbuddy_mlmeext->cur_bwmode = HT_CHANNEL_WIDTH_40;
++							pbuddy_mlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_LOWER;
++						}
++
++						if(pmlmeext->cur_channel>7 && pmlmeext->cur_channel<(14+1))
++						{
++							if(pht_info)
++								pht_info->infos[0] |= 0x3;
++
++							pbuddy_mlmeext->cur_bwmode = HT_CHANNEL_WIDTH_40;
++							pbuddy_mlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_UPPER;
++						}
++
++						set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode);
++					}
++				}
++
++				// to update channel value in beacon
++				pbuddy_network_mlmeext->Configuration.DSConfig = pmlmeext->cur_channel;
++				p = rtw_get_ie((pbuddy_network_mlmeext->IEs + sizeof(NDIS_802_11_FIXED_IEs)), _DSSET_IE_, &ie_len, (pbuddy_network_mlmeext->IELength - sizeof(NDIS_802_11_FIXED_IEs)));
++				if(p && ie_len>0)
++					*(p + 2) = pmlmeext->cur_channel;
++
++				p = rtw_get_ie((pbuddy_network_mlmeext->IEs + sizeof(NDIS_802_11_FIXED_IEs)), _HT_ADD_INFO_IE_, &ie_len, (pbuddy_network_mlmeext->IELength - sizeof(NDIS_802_11_FIXED_IEs)));
++				if( p && ie_len)
++				{
++					pht_info = (struct HT_info_element *)(p+2);
++					pht_info->primary_channel = pmlmeext->cur_channel;
++				}
++
++				// update mlmepriv's cur_network
++				_rtw_memcpy(&pbuddy_mlmepriv->cur_network.network, pbuddy_network_mlmeext, pbuddy_network_mlmeext->Length);
++			}
++			else
++			{
++				// switch back to original channel/bwmode/ch_offset;
++				set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode);
++			}
++
++			DBG_871X("after join, another adapter, CH=%d, BW=%d, offset=%d\n", pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_bwmode, pbuddy_mlmeext->cur_ch_offset);
++
++			if(change_band == _TRUE)
++				change_band_update_ie(pbuddy_adapter, pbuddy_network_mlmeext);
++
++			DBG_871X("update pbuddy_adapter's beacon\n");
++
++			update_beacon(pbuddy_adapter, 0, NULL, _TRUE);
++		}
++		else	 if (is_client_associated_to_ap(pbuddy_adapter) == _TRUE)
++		{
++			if((pbuddy_mlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40) &&
++				(pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_20))
++			{
++				set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode);
++			}
++		
++			issue_nulldata(pbuddy_adapter, NULL, 0, 0, 0);
++		}
++	}
++}
++
++sint	dc_check_fwstate(_adapter *padapter, sint fw_state)
++{
++	PADAPTER pbuddy_adapter = padapter->pbuddy_adapter;
++	struct mlme_priv *pbuddy_mlmepriv = NULL;
++
++	if(padapter->pbuddy_adapter != NULL && 
++		padapter->DualMacConcurrent == _TRUE)
++
++	{
++		pbuddy_mlmepriv = &(pbuddy_adapter->mlmepriv);
++
++		return check_fwstate(pbuddy_mlmepriv, fw_state);
++	}
++
++	return _FALSE;
++}
++
++u8 dc_handle_site_survey(_adapter *padapter)
++{
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	PADAPTER pbuddy_adapter = padapter->pbuddy_adapter;		
++
++	// only mac0 can do scan request, help issue nulldata(1) for mac1
++	if(pbuddy_adapter != NULL && 
++		padapter->DualMacConcurrent == _TRUE)
++	{
++		if (is_client_associated_to_ap(pbuddy_adapter) == _TRUE)
++		{
++			pmlmeext->sitesurvey_res.state = SCAN_TXNULL;
++		
++			issue_nulldata(pbuddy_adapter, NULL, 1, 2, 0);			
++
++			return _TRUE;
++		}
++	}
++
++	return _FALSE;
++}
++
++void	dc_report_survey_event(_adapter *padapter, union recv_frame *precv_frame)
++{
++	if(padapter->pbuddy_adapter != NULL && 
++		padapter->DualMacConcurrent == _TRUE)
++	{
++		report_survey_event(padapter->pbuddy_adapter, precv_frame);	
++	}
++}
++
++void dc_set_channel_bwmode_survey_done(_adapter *padapter)
++{
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	PADAPTER pbuddy_adapter = padapter->pbuddy_adapter;
++	struct mlme_priv *pbuddy_mlmepriv = NULL;
++	struct mlme_ext_priv *pbuddy_mlmeext = NULL;
++	struct mlme_ext_info *pbuddy_mlmeinfo = NULL;
++	u8 cur_channel;
++	u8 cur_bwmode;
++	u8 cur_ch_offset;
++
++	if(pbuddy_adapter != NULL && 
++		padapter->DualMacConcurrent == _TRUE)
++	{
++		pbuddy_mlmepriv = &(pbuddy_adapter->mlmepriv);
++		pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++		pbuddy_mlmeinfo = &(pbuddy_mlmeext->mlmext_info);
++
++		if(check_fwstate(pbuddy_mlmepriv, _FW_LINKED))
++		{
++			if(check_fwstate(pmlmepriv, _FW_LINKED) &&
++				(pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40))
++			{
++				cur_channel = pmlmeext->cur_channel;
++				cur_bwmode = pmlmeext->cur_bwmode;
++				cur_ch_offset = pmlmeext->cur_ch_offset;
++			}
++			else
++			{
++				cur_channel = pbuddy_mlmeext->cur_channel;
++				cur_bwmode = pbuddy_mlmeext->cur_bwmode;
++				cur_ch_offset = pbuddy_mlmeext->cur_ch_offset;
++			}
++		}
++		else
++		{
++			cur_channel = pmlmeext->cur_channel;
++			cur_bwmode = pmlmeext->cur_bwmode;
++			cur_ch_offset = pmlmeext->cur_ch_offset;
++		}
++
++		set_channel_bwmode(padapter, cur_channel, cur_ch_offset, cur_bwmode);
++
++		if (is_client_associated_to_ap(pbuddy_adapter) == _TRUE)
++		{
++			//issue null data 
++			issue_nulldata(pbuddy_adapter, NULL, 0, 0, 0);
++		}
++
++		if(((pbuddy_mlmeinfo->state&0x03) == WIFI_FW_AP_STATE) &&
++			check_fwstate(pbuddy_mlmepriv, _FW_LINKED))
++		{
++
++			DBG_871X("survey done, current CH=%d, BW=%d, offset=%d\n", cur_channel, cur_bwmode, cur_ch_offset);
++
++			DBG_871X("restart pbuddy_adapter's beacon\n");
++		
++			update_beacon(pbuddy_adapter, 0, NULL, _TRUE);
++		}
++	}
++	else
++	{
++		set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode);
++	}
++}
++
++void dc_set_ap_channel_bandwidth(_adapter *padapter, u8 channel, u8 channel_offset, u8 bwmode)
++{
++	u8	*p;
++	u8	val8, cur_channel, cur_bwmode, cur_ch_offset, change_band;
++	int	ie_len;	
++	struct registry_priv	*pregpriv = &padapter->registrypriv;
++	struct mlme_priv		*pmlmepriv = &(padapter->mlmepriv);
++	WLAN_BSSID_EX		*pnetwork = (WLAN_BSSID_EX *)&pmlmepriv->cur_network.network;
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct HT_info_element	*pht_info=NULL;
++	_adapter	*pbuddy_adapter = padapter->pbuddy_adapter;
++	struct mlme_priv	*pbuddy_mlmepriv = NULL;
++	struct mlme_ext_priv	*pbuddy_mlmeext = NULL;
++
++	DBG_871X("dualmac_concurrent_ap_set_channel_bwmode ==>\n");
++
++	cur_channel = channel;
++	cur_bwmode = bwmode;
++	cur_ch_offset = channel_offset;
++	change_band = _FALSE;
++
++	p = rtw_get_ie((pnetwork->IEs + sizeof(NDIS_802_11_FIXED_IEs)), _HT_ADD_INFO_IE_, &ie_len, (pnetwork->IELength - sizeof(NDIS_802_11_FIXED_IEs)));
++	if( p && ie_len)
++	{
++		pht_info = (struct HT_info_element *)(p+2);
++	}
++
++	if(pbuddy_adapter != NULL && 
++		padapter->DualMacConcurrent == _TRUE)
++	{
++		pbuddy_mlmepriv = &(pbuddy_adapter->mlmepriv);
++		pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++		
++		if(!check_fwstate(pbuddy_mlmepriv, _FW_LINKED|_FW_UNDER_LINKING|_FW_UNDER_SURVEY))
++		{
++			set_channel_bwmode(padapter, cur_channel, cur_ch_offset, cur_bwmode);
++		}
++		else if(check_fwstate(pbuddy_mlmepriv, _FW_LINKED)==_TRUE)
++		{
++			//To sync cur_channel/cur_bwmode/cur_ch_offset with another adapter
++			DBG_871X("Another iface is at linked state, sync cur_channel/cur_bwmode/cur_ch_offset\n");
++			DBG_871X("Another adapter, CH=%d, BW=%d, offset=%d\n", pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_bwmode, pbuddy_mlmeext->cur_ch_offset);
++			DBG_871X("Current adapter, CH=%d, BW=%d, offset=%d\n", cur_channel, cur_bwmode, cur_ch_offset);
++			
++			cur_channel = pbuddy_mlmeext->cur_channel;
++			if(cur_bwmode == HT_CHANNEL_WIDTH_40)
++			{
++				if(pht_info)
++					pht_info->infos[0] &= ~(BIT(0)|BIT(1));
++
++				if(pbuddy_mlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40)
++				{
++					cur_ch_offset = pbuddy_mlmeext->cur_ch_offset;
++
++					//to update cur_ch_offset value in beacon
++					if(pht_info)
++					{				
++						switch(cur_ch_offset)
++						{
++							case HAL_PRIME_CHNL_OFFSET_LOWER:
++								pht_info->infos[0] |= 0x1;
++								break;
++							case HAL_PRIME_CHNL_OFFSET_UPPER:
++								pht_info->infos[0] |= 0x3;
++								break;
++							case HAL_PRIME_CHNL_OFFSET_DONT_CARE:
++							default:							
++								break;					
++						}
++					}
++				}
++				else if(pbuddy_mlmeext->cur_bwmode == HT_CHANNEL_WIDTH_20)
++				{
++					cur_bwmode = HT_CHANNEL_WIDTH_20;
++					cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++
++					if(cur_channel>0 && cur_channel<5)
++					{
++						if(pht_info)
++							pht_info->infos[0] |= 0x1;		
++
++						cur_bwmode = HT_CHANNEL_WIDTH_40;
++						cur_ch_offset = HAL_PRIME_CHNL_OFFSET_LOWER;
++					}
++
++					if(cur_channel>7 && cur_channel<(14+1))
++					{
++						if(pht_info)
++							pht_info->infos[0] |= 0x3;
++
++						cur_bwmode = HT_CHANNEL_WIDTH_40;
++						cur_ch_offset = HAL_PRIME_CHNL_OFFSET_UPPER;
++					}
++
++					set_channel_bwmode(padapter, cur_channel, cur_ch_offset, cur_bwmode);
++				}
++			}
++
++			// to update channel value in beacon
++			pnetwork->Configuration.DSConfig = cur_channel;		
++			p = rtw_get_ie((pnetwork->IEs + sizeof(NDIS_802_11_FIXED_IEs)), _DSSET_IE_, &ie_len, (pnetwork->IELength - sizeof(NDIS_802_11_FIXED_IEs)));
++			if(p && ie_len>0)
++				*(p + 2) = cur_channel;
++
++			if(pht_info)
++				pht_info->primary_channel = cur_channel;
++		}
++	}
++	else
++	{
++		set_channel_bwmode(padapter, cur_channel, cur_ch_offset, cur_bwmode);
++	}
++
++	DBG_871X("CH=%d, BW=%d, offset=%d\n", cur_channel, cur_bwmode, cur_ch_offset);
++
++	if((channel <= 14 && cur_channel >= 36) ||
++		(channel >= 36 && cur_channel <= 14))
++	{
++		change_band = _TRUE;
++	}
++
++	pmlmeext->cur_channel = cur_channel;
++	pmlmeext->cur_bwmode = cur_bwmode;
++	pmlmeext->cur_ch_offset = cur_ch_offset;
++
++	if(change_band == _TRUE)
++		change_band_update_ie(padapter, pnetwork);
++
++	DBG_871X("dualmac_concurrent_ap_set_channel_bwmode <==\n");
++}
++
++void dc_resume_xmit(_adapter *padapter)
++{
++	PADAPTER pbuddy_adapter = padapter->pbuddy_adapter;
++	
++	if(pbuddy_adapter != NULL && 
++		padapter->DualMacConcurrent == _TRUE)
++	{
++		DBG_871X("dc_resume_xmit,  resume pbuddy_adapter Tx\n");
++		rtw_os_xmit_schedule(pbuddy_adapter);
++	}
++}
++
++u8	dc_check_xmit(_adapter *padapter)
++{
++	PADAPTER pbuddy_adapter = padapter->pbuddy_adapter;
++	struct mlme_priv *pbuddy_mlmepriv = NULL;
++
++	if(pbuddy_adapter != NULL && 
++		padapter->DualMacConcurrent == _TRUE)
++	{
++		pbuddy_mlmepriv = &(pbuddy_adapter->mlmepriv);
++		if (check_fwstate(pbuddy_mlmepriv, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == _TRUE)
++		{
++			DBG_871X("dc_check_xmit  pbuddy_adapter is under survey or under linking\n");
++			return _FALSE;
++		}
++	}
++
++	return _TRUE;
++}
++#endif
++
++#ifdef CONFIG_CONCURRENT_MODE
++sint check_buddy_mlmeinfo_state(_adapter *padapter, u32 state)
++{
++	PADAPTER pbuddy_adapter;
++	struct mlme_ext_priv *pbuddy_mlmeext;
++	struct mlme_ext_info *pbuddy_mlmeinfo;
++
++	if(padapter == NULL)
++		return _FALSE;	
++	
++	pbuddy_adapter = padapter->pbuddy_adapter;
++
++	if(pbuddy_adapter == NULL)
++		return _FALSE;	
++
++
++	pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++	pbuddy_mlmeinfo = &(pbuddy_mlmeext->mlmext_info);
++		
++	if((pbuddy_mlmeinfo->state&0x03) == state)
++		return _TRUE;		
++
++	return _FALSE;
++	
++}
++
++void concurrent_chk_joinbss_done(_adapter *padapter, int join_res)
++{
++	struct mlme_ext_priv	*pmlmeext;
++	struct mlme_ext_info	*pmlmeinfo;	
++	PADAPTER pbuddy_adapter;
++	struct mlme_priv *pbuddy_mlmepriv;
++	struct mlme_ext_priv *pbuddy_mlmeext;
++	struct mlme_ext_info *pbuddy_mlmeinfo;
++	WLAN_BSSID_EX *pbuddy_network_mlmeext;
++
++	pmlmeext = &padapter->mlmeextpriv;
++	pmlmeinfo = &(pmlmeext->mlmext_info);
++
++
++	if(!rtw_buddy_adapter_up(padapter))
++	{
++		set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode);
++		return;
++	}
++
++	pbuddy_adapter = padapter->pbuddy_adapter;
++	pbuddy_mlmepriv = &(pbuddy_adapter->mlmepriv);
++	pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++	pbuddy_mlmeinfo = &(pbuddy_mlmeext->mlmext_info);
++	pbuddy_network_mlmeext = &(pbuddy_mlmeinfo->network);
++
++	if(((pbuddy_mlmeinfo->state&0x03) == WIFI_FW_AP_STATE) &&
++			check_fwstate(pbuddy_mlmepriv, _FW_LINKED))
++	{
++		//restart and update beacon
++
++		DBG_871X("after join,primary adapter, CH=%d, BW=%d, offset=%d\n"
++			, pmlmeext->cur_channel, pmlmeext->cur_bwmode, pmlmeext->cur_ch_offset);
++		
++
++		if(join_res >= 0)
++		{
++			u8 *p;
++			int	ie_len;
++			u8	change_band = _FALSE;
++			struct HT_info_element *pht_info=NULL;
++
++			if((pmlmeext->cur_channel <= 14 && pbuddy_mlmeext->cur_channel >= 36) ||
++				(pmlmeext->cur_channel >= 36 && pbuddy_mlmeext->cur_channel <= 14))
++				change_band = _TRUE;
++
++			//sync channel/bwmode/ch_offset with primary adapter
++			pbuddy_mlmeext->cur_channel = pmlmeext->cur_channel;
++			if(pbuddy_mlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40)
++			{
++				p = rtw_get_ie((pbuddy_network_mlmeext->IEs + sizeof(NDIS_802_11_FIXED_IEs)), _HT_ADD_INFO_IE_, &ie_len, (pbuddy_network_mlmeext->IELength - sizeof(NDIS_802_11_FIXED_IEs)));
++				if( p && ie_len)
++				{
++					pht_info = (struct HT_info_element *)(p+2);
++					pht_info->infos[0] &= ~(BIT(0)|BIT(1)); //no secondary channel is present
++				}
++			
++				if(pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40)
++				{
++					pbuddy_mlmeext->cur_ch_offset = pmlmeext->cur_ch_offset;
++
++					//to update cur_ch_offset value in beacon
++					if( pht_info )
++					{
++						switch(pmlmeext->cur_ch_offset)
++						{
++							case HAL_PRIME_CHNL_OFFSET_LOWER:
++								pht_info->infos[0] |= 0x1;
++								break;
++							case HAL_PRIME_CHNL_OFFSET_UPPER:
++								pht_info->infos[0] |= 0x3;
++								break;
++							case HAL_PRIME_CHNL_OFFSET_DONT_CARE:							
++							default:							
++								break;					
++						}
++						
++					}					
++				
++				}
++				else if(pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_20)
++				{
++					if(pmlmeext->cur_channel>=1 && pmlmeext->cur_channel<=4)
++					{
++						if(pht_info)
++							pht_info->infos[0] |= HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE;		
++
++						pbuddy_mlmeext->cur_bwmode = HT_CHANNEL_WIDTH_40;
++						pbuddy_mlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_LOWER;
++					}
++					else if(pmlmeext->cur_channel>=5 && pmlmeext->cur_channel<=14)
++					{
++						if(pht_info)
++							pht_info->infos[0] |= HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW;
++						
++						pbuddy_mlmeext->cur_bwmode = HT_CHANNEL_WIDTH_40;
++						pbuddy_mlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_UPPER;						
++					}
++					else
++					{
++						switch(pmlmeext->cur_channel)
++						{
++							case 36:
++							case 44:
++							case 52:
++							case 60:
++							case 100:
++							case 108:
++							case 116:
++							case 124:
++							case 132:
++							case 149:
++							case 157:
++							{
++								if(pht_info)
++									pht_info->infos[0] |= HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE;		
++								pbuddy_mlmeext->cur_bwmode = HT_CHANNEL_WIDTH_40;
++								pbuddy_mlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_LOWER;
++								break;
++							}
++							case 40:
++							case 48:
++							case 56:
++							case 64:
++							case 104:
++							case 112:
++							case 120:
++							case 128:
++							case 136:
++							case 153:
++							case 161:
++							{
++								if(pht_info)
++									pht_info->infos[0] |= HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW;
++								
++								pbuddy_mlmeext->cur_bwmode = HT_CHANNEL_WIDTH_40;
++								pbuddy_mlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_UPPER;
++								break;
++							}
++							default:
++								if(pht_info)
++									pht_info->infos[0] &= ~HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW;
++								pbuddy_mlmeext->cur_bwmode = HT_CHANNEL_WIDTH_20;
++								pbuddy_mlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++								break;								
++
++						}
++						
++					}
++
++				}
++
++				set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode);
++				
++			}
++			else
++			{
++				set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode);
++			}
++
++
++			// to update channel value in beacon
++			pbuddy_network_mlmeext->Configuration.DSConfig = pmlmeext->cur_channel;		
++			p = rtw_get_ie((pbuddy_network_mlmeext->IEs + sizeof(NDIS_802_11_FIXED_IEs)), _DSSET_IE_, &ie_len, (pbuddy_network_mlmeext->IELength - sizeof(NDIS_802_11_FIXED_IEs)));
++			if(p && ie_len>0)
++				*(p + 2) = pmlmeext->cur_channel;
++
++			p = rtw_get_ie((pbuddy_network_mlmeext->IEs + sizeof(NDIS_802_11_FIXED_IEs)), _HT_ADD_INFO_IE_, &ie_len, (pbuddy_network_mlmeext->IELength - sizeof(NDIS_802_11_FIXED_IEs)));
++			if( p && ie_len)
++			{
++				pht_info = (struct HT_info_element *)(p+2);
++				pht_info->primary_channel = pmlmeext->cur_channel;
++			}
++
++			//buddy interface band is different from current interface, update ERP, support rate, ext support rate IE
++			if(change_band == _TRUE)
++				change_band_update_ie(pbuddy_adapter, pbuddy_network_mlmeext);
++		}
++		else
++		{
++			// switch back to original channel/bwmode/ch_offset;
++			set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode);
++		}
++
++		DBG_871X("after join, second adapter, CH=%d, BW=%d, offset=%d\n", pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_bwmode, pbuddy_mlmeext->cur_ch_offset);
++
++		DBG_871X("update pbuddy_adapter's beacon\n");
++		
++		update_beacon(pbuddy_adapter, 0, NULL, _TRUE);
++
++	}
++	else if(((pbuddy_mlmeinfo->state&0x03) == WIFI_FW_STATION_STATE) &&
++			check_fwstate(pbuddy_mlmepriv, _FW_LINKED))
++	{		
++		if(join_res >= 0)
++		{	
++			pbuddy_mlmeext->cur_channel = pmlmeext->cur_channel;
++			if(pbuddy_mlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40)
++				set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode);		
++			else if(pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40)
++				set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode);		
++			else
++				set_channel_bwmode(padapter, pmlmeext->cur_channel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
++		}
++		else
++		{
++			// switch back to original channel/bwmode/ch_offset;
++			set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode);
++		}			
++	}
++	else
++	{
++		set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode);
++	}
++	
++}
++#endif //CONFIG_CONCURRENT_MODE
++
++int rtw_chk_start_clnt_join(_adapter *padapter)
++{
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	unsigned char	cur_ch = pmlmeext->cur_channel;
++	unsigned char	cur_bw = pmlmeext->cur_bwmode;
++	unsigned char	cur_ch_offset = pmlmeext->cur_ch_offset;
++	bool chbw_allow = _TRUE;
++	bool connect_allow = _TRUE;
++
++#ifdef CONFIG_CONCURRENT_MODE
++	PADAPTER pbuddy_adapter;	
++	struct mlme_ext_priv *pbuddy_mlmeext;
++	struct mlme_ext_info	*pbuddy_pmlmeinfo;
++	struct mlme_priv *pbuddy_mlmepriv;
++
++	if (!rtw_buddy_adapter_up(padapter)) {
++		goto start_join_set_ch_bw;
++	}
++
++	pbuddy_adapter = padapter->pbuddy_adapter;		
++	pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++	pbuddy_pmlmeinfo = &(pbuddy_mlmeext->mlmext_info);
++	pbuddy_mlmepriv = &(pbuddy_adapter->mlmepriv);
++
++	if((pbuddy_pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE)//for AP MODE
++	{
++		DBG_871X("start_clnt_join: "ADPT_FMT"(ch=%d, bw=%d, ch_offset=%d)"
++			", "ADPT_FMT" AP mode(ch=%d, bw=%d, ch_offset=%d)\n",
++			ADPT_ARG(padapter), pmlmeext->cur_channel, pmlmeext->cur_bwmode, pmlmeext->cur_ch_offset,
++			ADPT_ARG(pbuddy_adapter), pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_bwmode, pbuddy_mlmeext->cur_ch_offset);
++
++		if(pmlmeext->cur_channel != pbuddy_mlmeext->cur_channel)
++		{
++			chbw_allow = _FALSE;
++		}
++		else if((pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40) &&
++			(pbuddy_mlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40) &&
++			(pmlmeext->cur_ch_offset != pbuddy_mlmeext->cur_ch_offset))
++		{
++			chbw_allow = _FALSE;
++		}
++		else if((pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_20) &&
++			(pbuddy_mlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40))
++		{
++			cur_ch = pmlmeext->cur_channel;
++			cur_bw = pbuddy_mlmeext->cur_bwmode;
++			cur_ch_offset = pbuddy_mlmeext->cur_ch_offset;
++		}
++
++		DBG_871X("start_clnt_join: connect_allow:%d, chbw_allow:%d\n", connect_allow, chbw_allow);
++		if (chbw_allow == _FALSE) {
++			#ifdef CONFIG_SPCT_CH_SWITCH
++			if (1) {
++				rtw_ap_inform_ch_switch(pbuddy_adapter, pmlmeext->cur_channel , pmlmeext->cur_ch_offset);
++			} else
++			#endif
++			{
++				//issue deauth to all stas if if2 is at ap mode
++				rtw_sta_flush(pbuddy_adapter);
++			}
++			rtw_hal_set_hwreg(padapter, HW_VAR_CHECK_TXBUF, 0);
++		}
++	}
++	else if(check_fwstate(pbuddy_mlmepriv, _FW_LINKED) == _TRUE &&
++		check_fwstate(pbuddy_mlmepriv, WIFI_STATION_STATE) == _TRUE) //for Client Mode/p2p client
++	{
++		DBG_871X("start_clnt_join: "ADPT_FMT"(ch=%d, bw=%d, ch_offset=%d)"
++			", "ADPT_FMT" STA mode(ch=%d, bw=%d, ch_offset=%d)\n",
++			ADPT_ARG(padapter), pmlmeext->cur_channel, pmlmeext->cur_bwmode, pmlmeext->cur_ch_offset,
++			ADPT_ARG(pbuddy_adapter), pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_bwmode, pbuddy_mlmeext->cur_ch_offset);
++
++		if(pmlmeext->cur_channel != pbuddy_mlmeext->cur_channel)
++		{
++			chbw_allow = _FALSE;
++		}
++		else if((pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_20) &&
++			(pbuddy_mlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40))
++		{
++			cur_bw = HT_CHANNEL_WIDTH_40;
++			cur_ch_offset = pbuddy_mlmeext->cur_ch_offset;
++		}
++		else if((pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40) &&
++			(pbuddy_mlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40) &&
++			(pmlmeext->cur_ch_offset != pbuddy_mlmeext->cur_ch_offset))
++		{
++			chbw_allow = _FALSE;
++		}
++
++		connect_allow = chbw_allow;
++
++		#if defined(CONFIG_P2P) && defined(CONFIG_IOCTL_CFG80211)
++		/* wlan0-sta mode has higher priority than p2p0-p2p client */
++		if (!rtw_p2p_chk_state(&(pbuddy_adapter->wdinfo), P2P_STATE_NONE)
++			&& pbuddy_adapter->wdinfo.driver_interface == DRIVER_CFG80211)
++		{
++			connect_allow = _TRUE;
++		}
++		#endif /* CONFIG_P2P && CONFIG_IOCTL_CFG80211 */
++
++		DBG_871X("start_clnt_join: connect_allow:%d, chbw_allow:%d\n", connect_allow, chbw_allow);
++		if (connect_allow == _TRUE && chbw_allow == _FALSE) {
++			/* disconnect buddy's connection */
++			rtw_disassoc_cmd(pbuddy_adapter, 500, _FALSE);
++			rtw_indicate_disconnect(pbuddy_adapter);
++			rtw_free_assoc_resources(pbuddy_adapter, 1);
++		}
++	}	
++
++start_join_set_ch_bw:
++#endif /* CONFIG_CONCURRENT_MODE */
++
++	if (connect_allow == _TRUE) {
++		DBG_871X("start_join_set_ch_bw: ch=%d, bwmode=%d, ch_offset=%d\n", cur_ch, cur_bw, cur_ch_offset);
++		set_channel_bwmode(padapter, cur_ch, cur_ch_offset, cur_bw);
++	}
++
++	return connect_allow == _TRUE ? _SUCCESS : _FAIL;
++}
++
++/* Find union about ch, bw, ch_offset of all linked interfaces */
++int rtw_get_ch_setting_union(_adapter *adapter, u8 *ch, u8 *bw, u8 *offset)
++{
++	struct dvobj_priv *dvobj = adapter_to_dvobj(adapter);
++	_adapter *iface;
++	struct mlme_ext_priv *mlmeext;
++	int i;
++	u8 ch_ret = 0;
++	u8 bw_ret = HT_CHANNEL_WIDTH_20;
++	u8 offset_ret = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++	int num = 0;
++
++	if (ch) *ch = 0;
++	if (bw) *bw = HT_CHANNEL_WIDTH_20;
++	if (offset) *offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++
++	for (i = 0; i<dvobj->iface_nums; i++) {
++		iface = dvobj->padapters[i];
++		mlmeext = &iface->mlmeextpriv;
++
++		if (!check_fwstate(&iface->mlmepriv, _FW_LINKED))
++			continue;
++
++		if (num == 0) {
++			ch_ret = mlmeext->cur_channel;
++			bw_ret = mlmeext->cur_bwmode;
++			offset_ret = mlmeext->cur_ch_offset;
++			num++;
++			continue;
++		}
++
++		if (ch_ret != mlmeext->cur_channel) {
++			num = 0;
++			break;
++		}
++
++		if (bw_ret < mlmeext->cur_bwmode) {
++			bw_ret = mlmeext->cur_bwmode;
++			offset_ret = mlmeext->cur_ch_offset;
++		} else if (bw_ret == mlmeext->cur_bwmode && offset_ret != mlmeext->cur_ch_offset) {
++			num = 0;
++			break;
++		}
++
++		num++;
++	}
++
++	if (num) {
++		if (ch) *ch = ch_ret;
++		if (bw) *bw = bw_ret;
++		if (offset) *offset = offset_ret;
++	}
++
++	return num;
++}
++
++u8 set_ch_hdl(_adapter *padapter, u8 *pbuf)
++{
++	struct set_ch_parm *set_ch_parm;
++	struct mlme_priv		*pmlmepriv = &padapter->mlmepriv;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++
++	if(!pbuf)
++		return H2C_PARAMETERS_ERROR;
++
++	set_ch_parm = (struct set_ch_parm *)pbuf;
++
++	DBG_871X(FUNC_NDEV_FMT" ch:%u, bw:%u, ch_offset:%u\n",
++		FUNC_NDEV_ARG(padapter->pnetdev),
++		set_ch_parm->ch, set_ch_parm->bw, set_ch_parm->ch_offset);
++
++	pmlmeext->cur_channel = set_ch_parm->ch;
++	pmlmeext->cur_ch_offset = set_ch_parm->ch_offset;
++	pmlmeext->cur_bwmode = set_ch_parm->bw;
++
++	set_channel_bwmode(padapter, set_ch_parm->ch, set_ch_parm->ch_offset, set_ch_parm->bw);
++
++	return 	H2C_SUCCESS;
++}
++
++u8 set_chplan_hdl(_adapter *padapter, unsigned char *pbuf)
++{
++	struct SetChannelPlan_param *setChannelPlan_param;
++	struct mlme_priv		*pmlmepriv = &padapter->mlmepriv;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++
++	if(!pbuf)
++		return H2C_PARAMETERS_ERROR;
++
++	setChannelPlan_param = (struct SetChannelPlan_param *)pbuf;
++
++	pmlmeext->max_chan_nums = init_channel_set(padapter, setChannelPlan_param->channel_plan, pmlmeext->channel_set);
++	init_channel_list(padapter, pmlmeext->channel_set, pmlmeext->max_chan_nums, &pmlmeext->channel_list);	
++
++	return 	H2C_SUCCESS;
++}
++
++u8 led_blink_hdl(_adapter *padapter, unsigned char *pbuf)
++{
++	struct LedBlink_param *ledBlink_param;
++
++	if(!pbuf)
++		return H2C_PARAMETERS_ERROR;
++
++	ledBlink_param = (struct LedBlink_param *)pbuf;
++
++	#ifdef CONFIG_LED_HANDLED_BY_CMD_THREAD
++	BlinkHandler(ledBlink_param->pLed);
++	#endif
++
++	return 	H2C_SUCCESS;
++}
++
++u8 set_csa_hdl(_adapter *padapter, unsigned char *pbuf)
++{
++#ifdef CONFIG_DFS
++	struct SetChannelSwitch_param *setChannelSwitch_param;
++	struct SetChannelPlan_param *setChannelPlan_param;
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;
++	u8 new_ch_no;
++	u8 gval8 = 0x00, sval8 = 0xff;
++
++	if(!pbuf)
++		return H2C_PARAMETERS_ERROR;
++
++	setChannelSwitch_param = (struct SetChannelSwitch_param *)pbuf;
++	new_ch_no = setChannelSwitch_param->new_ch_no;
++
++	rtw_hal_get_hwreg(padapter, HW_VAR_TXPAUSE, &gval8);
++
++	rtw_hal_set_hwreg(padapter, HW_VAR_TXPAUSE, &sval8);
++
++	DBG_871X("DFS detected! Swiching channel to %d!\n", new_ch_no);
++	SelectChannel(padapter, new_ch_no);
++
++	rtw_hal_set_hwreg(padapter, HW_VAR_TXPAUSE, &gval8);
++
++	rtw_free_network_queue(padapter, _TRUE);
++	rtw_indicate_disconnect(padapter);
++
++	if ( ((new_ch_no >= 52) && (new_ch_no <= 64)) ||((new_ch_no >= 100) && (new_ch_no <= 140)) ) {
++		DBG_871X("Switched to DFS band (ch %02x) again!!\n", new_ch_no);
++	}
++
++	return 	H2C_SUCCESS;
++#else
++	return	H2C_REJECTED;
++#endif //CONFIG_DFS
++
++}
++
++// TDLS_WRCR		: write RCR DATA BIT
++// TDLS_SD_PTI		: issue peer traffic indication
++// TDLS_CS_OFF		: go back to the channel linked with AP, terminating channel switch procedure
++// TDLS_INIT_CH_SEN	: init channel sensing, receive all data and mgnt frame
++// TDLS_DONE_CH_SEN: channel sensing and report candidate channel
++// TDLS_OFF_CH		: first time set channel to off channel
++// TDLS_BASE_CH		: go back tp the channel linked with AP when set base channel as target channel
++// TDLS_P_OFF_CH	: periodically go to off channel
++// TDLS_P_BASE_CH	: periodically go back to base channel
++// TDLS_RS_RCR		: restore RCR
++// TDLS_CKALV_PH1	: check alive timer phase1
++// TDLS_CKALV_PH2	: check alive timer phase2
++// TDLS_FREE_STA	: free tdls sta
++u8 tdls_hdl(_adapter *padapter, unsigned char *pbuf)
++{
++#ifdef CONFIG_TDLS
++	_irqL irqL;
++	struct tdls_info *ptdlsinfo = &padapter->tdlsinfo;
++	struct TDLSoption_param *TDLSoption;
++	struct sta_info *ptdls_sta;
++	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;
++	u8 survey_channel, i, min, option;
++
++	if(!pbuf)
++		return H2C_PARAMETERS_ERROR;
++
++	TDLSoption = (struct TDLSoption_param *)pbuf;
++
++	ptdls_sta = rtw_get_stainfo( &(padapter->stapriv), TDLSoption->addr );
++	option = TDLSoption->option;
++
++	if( ptdls_sta == NULL )
++	{
++		if( option != TDLS_RS_RCR )
++			return H2C_REJECTED;
++	}
++
++	//_enter_critical_bh(&(ptdlsinfo->hdl_lock), &irqL);
++	DBG_871X("[%s] option:%d\n", __FUNCTION__, option);
++		
++	switch(option){
++		case TDLS_WRCR:
++			//As long as TDLS handshake success, we should set RCR_CBSSID_DATA bit to 0
++			//such we can receive all kinds of data frames.
++			rtw_hal_set_hwreg(padapter, HW_VAR_TDLS_WRCR, 0);
++			DBG_871X("TDLS with "MAC_FMT"\n", MAC_ARG(ptdls_sta->hwaddr));
++
++			pmlmeinfo->FW_sta_info[ptdls_sta->mac_id].psta = ptdls_sta;
++			//set TDLS sta rate.
++			set_sta_rate(padapter, ptdls_sta);
++			break;
++		case TDLS_SD_PTI:
++			issue_tdls_peer_traffic_indication(padapter, ptdls_sta);
++			break;
++		case TDLS_CS_OFF:
++			_cancel_timer_ex(&ptdls_sta->base_ch_timer);
++			_cancel_timer_ex(&ptdls_sta->off_ch_timer);
++			SelectChannel(padapter, pmlmeext->cur_channel);
++			ptdls_sta->tdls_sta_state &= ~(TDLS_CH_SWITCH_ON_STATE | 
++								TDLS_PEER_AT_OFF_STATE | 
++								TDLS_AT_OFF_CH_STATE);
++			DBG_871X("go back to base channel\n ");
++			issue_nulldata(padapter, NULL, 0, 0, 0);
++			break;
++		case TDLS_INIT_CH_SEN:
++			rtw_hal_set_hwreg(padapter, HW_VAR_TDLS_INIT_CH_SEN, 0);
++			pmlmeext->sitesurvey_res.channel_idx = 0;
++			ptdls_sta->option = TDLS_DONE_CH_SEN;
++			rtw_tdls_cmd(padapter, ptdls_sta->hwaddr, TDLS_DONE_CH_SEN);
++			break;
++		case TDLS_DONE_CH_SEN:
++			survey_channel = pmlmeext->channel_set[pmlmeext->sitesurvey_res.channel_idx].ChannelNum;
++			if(survey_channel){
++				SelectChannel(padapter, survey_channel);
++				ptdlsinfo->cur_channel = survey_channel;
++				pmlmeext->sitesurvey_res.channel_idx++;
++				_set_timer(&ptdls_sta->option_timer, SURVEY_TO);
++			}else{
++				SelectChannel(padapter, pmlmeext->cur_channel);
++
++				rtw_hal_set_hwreg(padapter, HW_VAR_TDLS_DONE_CH_SEN, 0);
++
++				if(ptdlsinfo->ch_sensing==1){
++					ptdlsinfo->ch_sensing=0;
++					ptdlsinfo->cur_channel=1;
++					min=ptdlsinfo->collect_pkt_num[0];
++					for(i=1; i<MAX_CHANNEL_NUM-1; i++){
++						if(min > ptdlsinfo->collect_pkt_num[i]){
++							ptdlsinfo->cur_channel=i+1;
++							min=ptdlsinfo->collect_pkt_num[i];
++						}
++						ptdlsinfo->collect_pkt_num[i]=0;
++					}
++					ptdlsinfo->collect_pkt_num[0]=0;
++					ptdlsinfo->candidate_ch=ptdlsinfo->cur_channel;
++					DBG_871X("TDLS channel sensing done, candidate channel: %02x\n", ptdlsinfo->candidate_ch);
++					ptdlsinfo->cur_channel=0;
++
++				}
++
++				if(ptdls_sta->tdls_sta_state & TDLS_PEER_SLEEP_STATE){
++					ptdls_sta->tdls_sta_state |= TDLS_APSD_CHSW_STATE;
++				}else{
++					//send null data with pwrbit==1 before send ch_switching_req to peer STA.
++					issue_nulldata(padapter, NULL, 1, 0, 0);
++
++					ptdls_sta->tdls_sta_state |= TDLS_CH_SW_INITIATOR_STATE;
++
++					issue_tdls_ch_switch_req(padapter, ptdls_sta->hwaddr);
++					DBG_871X("issue tdls ch switch req\n");
++				}
++			}
++			break;
++		case TDLS_OFF_CH:
++			issue_nulldata(padapter, NULL, 1, 0, 0);
++			SelectChannel(padapter, ptdls_sta->off_ch);
++
++			DBG_871X("change channel to tar ch:%02x\n", ptdls_sta->off_ch);
++			ptdls_sta->tdls_sta_state |= TDLS_AT_OFF_CH_STATE;
++			ptdls_sta->tdls_sta_state &= ~(TDLS_PEER_AT_OFF_STATE);
++			_set_timer(&ptdls_sta->option_timer, (u32)ptdls_sta->ch_switch_time);
++			break;
++		case TDLS_BASE_CH:
++			_cancel_timer_ex(&ptdls_sta->base_ch_timer);
++			_cancel_timer_ex(&ptdls_sta->off_ch_timer);
++			SelectChannel(padapter, pmlmeext->cur_channel);
++			ptdls_sta->tdls_sta_state &= ~(TDLS_CH_SWITCH_ON_STATE | 
++								TDLS_PEER_AT_OFF_STATE | 
++								TDLS_AT_OFF_CH_STATE);
++			DBG_871X("go back to base channel\n ");
++			issue_nulldata(padapter, NULL, 0, 0, 0);
++			_set_timer(&ptdls_sta->option_timer, (u32)ptdls_sta->ch_switch_time);
++			break;
++		case TDLS_P_OFF_CH:
++			SelectChannel(padapter, pmlmeext->cur_channel);
++			issue_nulldata(padapter, NULL, 0, 0, 0);
++			DBG_871X("change channel to base ch:%02x\n", pmlmeext->cur_channel);
++			ptdls_sta->tdls_sta_state &= ~(TDLS_PEER_AT_OFF_STATE| TDLS_AT_OFF_CH_STATE);
++			_set_timer(&ptdls_sta->off_ch_timer, TDLS_STAY_TIME);
++			break;
++		case TDLS_P_BASE_CH:
++			issue_nulldata(ptdls_sta->padapter, NULL, 1, 0, 0);
++			SelectChannel(padapter, ptdls_sta->off_ch);
++			DBG_871X("change channel to off ch:%02x\n", ptdls_sta->off_ch);
++			ptdls_sta->tdls_sta_state |= TDLS_AT_OFF_CH_STATE;
++			if((ptdls_sta->tdls_sta_state & TDLS_PEER_AT_OFF_STATE) != TDLS_PEER_AT_OFF_STATE){
++				issue_nulldata_to_TDLS_peer_STA(padapter, ptdls_sta, 0);
++			}
++			_set_timer(&ptdls_sta->base_ch_timer, TDLS_STAY_TIME);	
++			break;
++		case TDLS_RS_RCR:
++			rtw_hal_set_hwreg(padapter, HW_VAR_TDLS_RS_RCR, 0);
++			DBG_871X("wirte REG_RCR, set bit6 on\n");
++			break;
++		case TDLS_CKALV_PH1:
++			_set_timer(&ptdls_sta->alive_timer2, TDLS_ALIVE_TIMER_PH2);
++			break;
++		case TDLS_CKALV_PH2:
++			_set_timer(&ptdls_sta->alive_timer1, TDLS_ALIVE_TIMER_PH1);
++			break;
++		case TDLS_FREE_STA:
++			free_tdls_sta(padapter, ptdls_sta);
++			break;
++			
++	}
++
++	//_exit_critical_bh(&(ptdlsinfo->hdl_lock), &irqL);
++
++	return H2C_SUCCESS;
++#else
++	return H2C_REJECTED;
++#endif //CONFIG_TDLS
++
++}
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_mp.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_mp.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_mp.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_mp.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,1324 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _RTW_MP_C_
++
++#include <drv_types.h>
++
++#ifdef PLATFORM_FREEBSD
++#include <sys/unistd.h>		/* for RFHIGHPID */
++#endif
++
++#ifdef CONFIG_RTL8712
++#include <rtw_mp_phy_regdef.h>
++#endif
++#ifdef CONFIG_RTL8192C
++#include <rtl8192c_hal.h>
++#endif
++#ifdef CONFIG_RTL8192D
++#include <rtl8192d_hal.h>
++#endif
++#ifdef CONFIG_RTL8723A
++#include <rtl8723a_hal.h>
++#endif
++
++
++#ifdef CONFIG_MP_INCLUDED
++
++u32 read_macreg(_adapter *padapter, u32 addr, u32 sz)
++{
++	u32 val = 0;
++
++	switch(sz)
++	{
++		case 1:
++			val = rtw_read8(padapter, addr);
++			break;
++		case 2:
++			val = rtw_read16(padapter, addr);
++			break;
++		case 4:
++			val = rtw_read32(padapter, addr);
++			break;
++		default:
++			val = 0xffffffff;
++			break;
++	}
++
++	return val;
++	
++}
++
++void write_macreg(_adapter *padapter, u32 addr, u32 val, u32 sz)
++{
++	switch(sz)
++	{
++		case 1:
++			rtw_write8(padapter, addr, (u8)val);
++			break;
++		case 2:
++			rtw_write16(padapter, addr, (u16)val);
++			break;
++		case 4:
++			rtw_write32(padapter, addr, val);
++			break;
++		default:
++			break;
++	}
++
++}
++
++u32 read_bbreg(_adapter *padapter, u32 addr, u32 bitmask)
++{
++	return rtw_hal_read_bbreg(padapter, addr, bitmask);
++}
++
++void write_bbreg(_adapter *padapter, u32 addr, u32 bitmask, u32 val)
++{
++	rtw_hal_write_bbreg(padapter, addr, bitmask, val);
++}
++
++u32 _read_rfreg(PADAPTER padapter, u8 rfpath, u32 addr, u32 bitmask)
++{
++	return rtw_hal_read_rfreg(padapter, (RF_RADIO_PATH_E)rfpath, addr, bitmask);
++}
++
++void _write_rfreg(PADAPTER padapter, u8 rfpath, u32 addr, u32 bitmask, u32 val)
++{
++	rtw_hal_write_rfreg(padapter, (RF_RADIO_PATH_E)rfpath, addr, bitmask, val);
++}
++
++u32 read_rfreg(PADAPTER padapter, u8 rfpath, u32 addr)
++{
++	return _read_rfreg(padapter, (RF_RADIO_PATH_E)rfpath, addr, bRFRegOffsetMask);
++}
++
++void write_rfreg(PADAPTER padapter, u8 rfpath, u32 addr, u32 val)
++{
++	_write_rfreg(padapter, (RF_RADIO_PATH_E)rfpath, addr, bRFRegOffsetMask, val);
++}
++
++static void _init_mp_priv_(struct mp_priv *pmp_priv)
++{
++	WLAN_BSSID_EX *pnetwork;
++
++	_rtw_memset(pmp_priv, 0, sizeof(struct mp_priv));
++
++	pmp_priv->mode = MP_OFF;
++
++	pmp_priv->channel = 1;
++	pmp_priv->bandwidth = HT_CHANNEL_WIDTH_20;
++	pmp_priv->prime_channel_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++	pmp_priv->rateidx = MPT_RATE_1M;
++	pmp_priv->txpoweridx = 0x2A;
++
++	pmp_priv->antenna_tx = ANTENNA_A;
++	pmp_priv->antenna_rx = ANTENNA_AB;
++
++	pmp_priv->check_mp_pkt = 0;
++
++	pmp_priv->tx_pktcount = 0;
++
++	pmp_priv->rx_pktcount = 0;
++	pmp_priv->rx_crcerrpktcount = 0;
++
++	pmp_priv->network_macaddr[0] = 0x00;
++	pmp_priv->network_macaddr[1] = 0xE0;
++	pmp_priv->network_macaddr[2] = 0x4C;
++	pmp_priv->network_macaddr[3] = 0x87;
++	pmp_priv->network_macaddr[4] = 0x66;
++	pmp_priv->network_macaddr[5] = 0x55;
++
++	pnetwork = &pmp_priv->mp_network.network;
++	_rtw_memcpy(pnetwork->MacAddress, pmp_priv->network_macaddr, ETH_ALEN);
++
++	pnetwork->Ssid.SsidLength = 8;
++	_rtw_memcpy(pnetwork->Ssid.Ssid, "mp_871x", pnetwork->Ssid.SsidLength);
++}
++
++#ifdef PLATFORM_WINDOWS
++/*
++void mp_wi_callback(
++	IN NDIS_WORK_ITEM*	pwk_item,
++	IN PVOID			cntx
++	)
++{
++	_adapter* padapter =(_adapter *)cntx;
++	struct mp_priv *pmppriv=&padapter->mppriv;
++	struct mp_wi_cntx	*pmp_wi_cntx=&pmppriv->wi_cntx;
++
++	// Execute specified action.
++	if(pmp_wi_cntx->curractfunc != NULL)
++	{
++		LARGE_INTEGER	cur_time;
++		ULONGLONG start_time, end_time;
++		NdisGetCurrentSystemTime(&cur_time);	// driver version
++		start_time = cur_time.QuadPart/10; // The return value is in microsecond
++
++		pmp_wi_cntx->curractfunc(padapter);
++
++		NdisGetCurrentSystemTime(&cur_time);	// driver version
++		end_time = cur_time.QuadPart/10; // The return value is in microsecond
++
++		RT_TRACE(_module_mp_, _drv_info_,
++			 ("WorkItemActType: %d, time spent: %I64d us\n",
++			  pmp_wi_cntx->param.act_type, (end_time-start_time)));
++	}
++
++	NdisAcquireSpinLock(&(pmp_wi_cntx->mp_wi_lock));
++	pmp_wi_cntx->bmp_wi_progress= _FALSE;
++	NdisReleaseSpinLock(&(pmp_wi_cntx->mp_wi_lock));
++
++	if (pmp_wi_cntx->bmpdrv_unload)
++	{
++		NdisSetEvent(&(pmp_wi_cntx->mp_wi_evt));
++	}
++
++}
++*/
++
++static int init_mp_priv_by_os(struct mp_priv *pmp_priv)
++{
++	struct mp_wi_cntx *pmp_wi_cntx;
++
++	if (pmp_priv == NULL) return _FAIL;
++
++	pmp_priv->rx_testcnt = 0;
++	pmp_priv->rx_testcnt1 = 0;
++	pmp_priv->rx_testcnt2 = 0;
++
++	pmp_priv->tx_testcnt = 0;
++	pmp_priv->tx_testcnt1 = 0;
++
++	pmp_wi_cntx = &pmp_priv->wi_cntx
++	pmp_wi_cntx->bmpdrv_unload = _FALSE;
++	pmp_wi_cntx->bmp_wi_progress = _FALSE;
++	pmp_wi_cntx->curractfunc = NULL;
++
++	return _SUCCESS;
++}
++#endif
++
++#ifdef PLATFORM_LINUX
++static int init_mp_priv_by_os(struct mp_priv *pmp_priv)
++{
++	int i, res;
++	struct mp_xmit_frame *pmp_xmitframe;
++
++	if (pmp_priv == NULL) return _FAIL;
++
++	_rtw_init_queue(&pmp_priv->free_mp_xmitqueue);
++
++	pmp_priv->pallocated_mp_xmitframe_buf = NULL;
++	pmp_priv->pallocated_mp_xmitframe_buf = rtw_zmalloc(NR_MP_XMITFRAME * sizeof(struct mp_xmit_frame) + 4);
++	if (pmp_priv->pallocated_mp_xmitframe_buf == NULL) {
++		res = _FAIL;
++		goto _exit_init_mp_priv;
++	}
++
++	pmp_priv->pmp_xmtframe_buf = pmp_priv->pallocated_mp_xmitframe_buf + 4 - ((uint) (pmp_priv->pallocated_mp_xmitframe_buf) & 3);
++
++	pmp_xmitframe = (struct mp_xmit_frame*)pmp_priv->pmp_xmtframe_buf;
++
++	for (i = 0; i < NR_MP_XMITFRAME; i++)
++	{
++		_rtw_init_listhead(&pmp_xmitframe->list);
++		rtw_list_insert_tail(&pmp_xmitframe->list, &pmp_priv->free_mp_xmitqueue.queue);
++
++		pmp_xmitframe->pkt = NULL;
++		pmp_xmitframe->frame_tag = MP_FRAMETAG;
++		pmp_xmitframe->padapter = pmp_priv->papdater;
++
++		pmp_xmitframe++;
++	}
++
++	pmp_priv->free_mp_xmitframe_cnt = NR_MP_XMITFRAME;
++
++	res = _SUCCESS;
++
++_exit_init_mp_priv:
++
++	return res;
++}
++#endif
++
++static void mp_init_xmit_attrib(struct mp_tx *pmptx, PADAPTER padapter)
++{
++	struct pkt_attrib *pattrib;
++	struct tx_desc *desc;
++
++	// init xmitframe attribute
++	pattrib = &pmptx->attrib;
++	_rtw_memset(pattrib, 0, sizeof(struct pkt_attrib));
++	desc = &pmptx->desc;
++	_rtw_memset(desc, 0, TXDESC_SIZE);
++
++	pattrib->ether_type = 0x8712;
++	//_rtw_memcpy(pattrib->src, padapter->eeprompriv.mac_addr, ETH_ALEN);
++//	_rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN);
++	_rtw_memset(pattrib->dst, 0xFF, ETH_ALEN);
++//	pattrib->pctrl = 0;
++//	pattrib->dhcp_pkt = 0;
++//	pattrib->pktlen = 0;
++	pattrib->ack_policy = 0;
++//	pattrib->pkt_hdrlen = ETH_HLEN;
++	pattrib->hdrlen = WLAN_HDR_A3_LEN;
++	pattrib->subtype = WIFI_DATA;
++	pattrib->priority = 0;
++	pattrib->qsel = pattrib->priority;
++//	do_queue_select(padapter, pattrib);
++	pattrib->nr_frags = 1;
++	pattrib->encrypt = 0;
++	pattrib->bswenc = _FALSE;
++	pattrib->qos_en = _FALSE;
++}
++
++s32 init_mp_priv(PADAPTER padapter)
++{
++	struct mp_priv *pmppriv = &padapter->mppriv;
++
++	_init_mp_priv_(pmppriv);
++	pmppriv->papdater = padapter;
++
++	pmppriv->tx.stop = 1;
++	mp_init_xmit_attrib(&pmppriv->tx, padapter);
++
++	switch (padapter->registrypriv.rf_config) {
++		case RF_1T1R:
++			pmppriv->antenna_tx = ANTENNA_A;
++			pmppriv->antenna_rx = ANTENNA_A;
++			break;
++		case RF_1T2R:
++		default:
++			pmppriv->antenna_tx = ANTENNA_A;
++			pmppriv->antenna_rx = ANTENNA_AB;
++			break;
++		case RF_2T2R:
++		case RF_2T2R_GREEN:
++			pmppriv->antenna_tx = ANTENNA_AB;
++			pmppriv->antenna_rx = ANTENNA_AB;
++			break;
++		case RF_2T4R:
++			pmppriv->antenna_tx = ANTENNA_AB;
++			pmppriv->antenna_rx = ANTENNA_ABCD;
++			break;
++	}
++
++	return _SUCCESS;
++}
++
++void free_mp_priv(struct mp_priv *pmp_priv)
++{
++	if (pmp_priv->pallocated_mp_xmitframe_buf) {
++		rtw_mfree(pmp_priv->pallocated_mp_xmitframe_buf, 0);
++		pmp_priv->pallocated_mp_xmitframe_buf = NULL;
++	}
++	pmp_priv->pmp_xmtframe_buf = NULL;
++}
++
++#ifdef CONFIG_RTL8192C
++#define PHY_IQCalibrate(a,b)	rtl8192c_PHY_IQCalibrate(a,b)
++#define PHY_LCCalibrate(a)	rtl8192c_PHY_LCCalibrate(a)
++#define dm_CheckTXPowerTracking(a)	rtl8192c_dm_CheckTXPowerTracking(a)
++#define PHY_SetRFPathSwitch(a,b)	rtl8192c_PHY_SetRFPathSwitch(a,b)
++#endif
++
++#ifdef CONFIG_RTL8192D
++#define PHY_IQCalibrate(a)	rtl8192d_PHY_IQCalibrate(a)
++#define PHY_LCCalibrate(a)	rtl8192d_PHY_LCCalibrate(a)
++#define dm_CheckTXPowerTracking(a)	rtl8192d_dm_CheckTXPowerTracking(a)
++#define PHY_SetRFPathSwitch(a,b)	rtl8192d_PHY_SetRFPathSwitch(a,b)
++#endif
++
++s32
++MPT_InitializeAdapter(
++	IN	PADAPTER			pAdapter,
++	IN	u8				Channel
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	s32		rtStatus = _SUCCESS;
++	PMPT_CONTEXT	pMptCtx = &pAdapter->mppriv.MptCtx;
++	u32		ledsetting;
++
++	//-------------------------------------------------------------------------
++	// HW Initialization for 8190 MPT.
++	//-------------------------------------------------------------------------
++	//-------------------------------------------------------------------------
++	// SW Initialization for 8190 MP.
++	//-------------------------------------------------------------------------
++	pMptCtx->bMptDrvUnload = _FALSE;
++	pMptCtx->bMassProdTest = _FALSE;
++	pMptCtx->bMptIndexEven = _TRUE;	//default gain index is -6.0db
++
++	/* Init mpt event. */
++#if 0 // for Windows
++	NdisInitializeEvent( &(pMptCtx->MptWorkItemEvent) );
++	NdisAllocateSpinLock( &(pMptCtx->MptWorkItemSpinLock) );
++
++	PlatformInitializeWorkItem(
++		Adapter,
++		&(pMptCtx->MptWorkItem),
++		(RT_WORKITEM_CALL_BACK)MPT_WorkItemCallback,
++		(PVOID)Adapter,
++		"MptWorkItem");
++#endif
++	pMptCtx->bMptWorkItemInProgress = _FALSE;
++	pMptCtx->CurrMptAct = NULL;
++	//-------------------------------------------------------------------------
++
++#if 1
++	// Don't accept any packets
++	rtw_write32(pAdapter, REG_RCR, 0);
++#else
++	// Accept CRC error and destination address
++	pHalData->ReceiveConfig |= (RCR_ACRC32|RCR_AAP);
++	rtw_write32(pAdapter, REG_RCR, pHalData->ReceiveConfig);
++#endif
++
++#if 0
++	// If EEPROM or EFUSE is empty,we assign as RF 2T2R for MP.
++	if (pHalData->AutoloadFailFlag == TRUE)
++	{
++		pHalData->RF_Type = RF_2T2R;
++	}
++#endif
++	ledsetting = rtw_read32(pAdapter, REG_LEDCFG0);
++	rtw_write32(pAdapter, REG_LEDCFG0, ledsetting & ~LED0DIS);
++
++#ifdef CONFIG_RTL8192C
++	PHY_IQCalibrate(pAdapter, _FALSE);
++	dm_CheckTXPowerTracking(pAdapter);	//trigger thermal meter
++	PHY_LCCalibrate(pAdapter);
++#endif
++
++#ifdef CONFIG_RTL8192D
++	PHY_IQCalibrate(pAdapter);
++	dm_CheckTXPowerTracking(pAdapter);	//trigger thermal meter
++	PHY_LCCalibrate(pAdapter);
++#endif
++
++#ifdef CONFIG_PCI_HCI
++	PHY_SetRFPathSwitch(pAdapter, 1/*pHalData->bDefaultAntenna*/);	//Wifi default use Main
++#else
++
++#ifdef CONFIG_RTL8192C
++#if 1
++	if (pHalData->BoardType == BOARD_MINICARD)
++		PHY_SetRFPathSwitch(pAdapter, 1/*pHalData->bDefaultAntenna*/); //default use Main
++#else
++	if(pAdapter->HalFunc.GetInterfaceSelectionHandler(pAdapter) == INTF_SEL2_MINICARD )
++		PHY_SetRFPathSwitch(Adapter, pAdapter->MgntInfo.bDefaultAntenna); //default use Main
++#endif
++
++#endif
++
++#endif
++
++	pMptCtx->backup0xc50 = (u1Byte)PHY_QueryBBReg(pAdapter, rOFDM0_XAAGCCore1, bMaskByte0);
++	pMptCtx->backup0xc58 = (u1Byte)PHY_QueryBBReg(pAdapter, rOFDM0_XBAGCCore1, bMaskByte0);
++	pMptCtx->backup0xc30 = (u1Byte)PHY_QueryBBReg(pAdapter, rOFDM0_RxDetector1, bMaskByte0);
++
++	return	rtStatus;
++}
++
++/*-----------------------------------------------------------------------------
++ * Function:	MPT_DeInitAdapter()
++ *
++ * Overview:	Extra DeInitialization for Mass Production Test.
++ *
++ * Input:		PADAPTER	pAdapter
++ *
++ * Output:		NONE
++ *
++ * Return:		NONE
++ *
++ * Revised History:
++ *	When		Who		Remark
++ *	05/08/2007	MHC		Create Version 0.
++ *	05/18/2007	MHC		Add normal driver MPHalt code.
++ *
++ *---------------------------------------------------------------------------*/
++VOID
++MPT_DeInitAdapter(
++	IN	PADAPTER	pAdapter
++	)
++{
++	PMPT_CONTEXT		pMptCtx = &pAdapter->mppriv.MptCtx;
++
++	pMptCtx->bMptDrvUnload = _TRUE;
++#if 0 // for Windows
++	PlatformFreeWorkItem( &(pMptCtx->MptWorkItem) );
++
++	while(pMptCtx->bMptWorkItemInProgress)
++	{
++		if(NdisWaitEvent(&(pMptCtx->MptWorkItemEvent), 50))
++		{
++			break;
++		}
++	}
++	NdisFreeSpinLock( &(pMptCtx->MptWorkItemSpinLock) );
++#endif
++}
++
++static u8 mpt_ProStartTest(PADAPTER padapter)
++{
++	PMPT_CONTEXT pMptCtx = &padapter->mppriv.MptCtx;
++
++	pMptCtx->bMassProdTest = _TRUE;
++	pMptCtx->bStartContTx = _FALSE;
++	pMptCtx->bCckContTx = _FALSE;
++	pMptCtx->bOfdmContTx = _FALSE;
++	pMptCtx->bSingleCarrier = _FALSE;
++	pMptCtx->bCarrierSuppression = _FALSE;
++	pMptCtx->bSingleTone = _FALSE;
++
++	return _SUCCESS;
++}
++
++/*
++ * General use
++ */
++s32 SetPowerTracking(PADAPTER padapter, u8 enable)
++{
++
++	Hal_SetPowerTracking( padapter, enable );
++	return 0;
++}
++
++void GetPowerTracking(PADAPTER padapter, u8 *enable)
++{
++	Hal_GetPowerTracking( padapter, enable );
++}
++
++static void disable_dm(PADAPTER padapter)
++{
++#ifndef CONFIG_RTL8723A
++	u8 v8;
++#endif
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++
++
++	//3 1. disable firmware dynamic mechanism
++	// disable Power Training, Rate Adaptive
++#ifdef CONFIG_RTL8723A
++	SetBcnCtrlReg(padapter, 0, EN_BCN_FUNCTION);
++#else
++	v8 = rtw_read8(padapter, REG_BCN_CTRL);
++	v8 &= ~EN_BCN_FUNCTION;
++	rtw_write8(padapter, REG_BCN_CTRL, v8);
++#endif
++
++	//3 2. disable driver dynamic mechanism
++	// disable Dynamic Initial Gain
++	// disable High Power
++	// disable Power Tracking
++	Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, _FALSE);
++
++	// enable APK, LCK and IQK but disable power tracking
++	pdmpriv->TxPowerTrackControl = _FALSE;
++	Switch_DM_Func(padapter, DYNAMIC_FUNC_SS, _TRUE);
++}
++
++//This function initializes the DUT to the MP test mode
++s32 mp_start_test(PADAPTER padapter)
++{
++	WLAN_BSSID_EX bssid;
++	struct sta_info *psta;
++	u32 length;
++	u8 val8;
++
++	_irqL irqL;
++	s32 res = _SUCCESS;
++
++	struct mp_priv *pmppriv = &padapter->mppriv;
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	struct wlan_network *tgt_network = &pmlmepriv->cur_network;
++
++
++	//3 disable dynamic mechanism
++	disable_dm(padapter);
++
++	//3 0. update mp_priv
++#if  defined (CONFIG_RTL8192C)  ||  defined (CONFIG_RTL8192D)
++	if (padapter->registrypriv.rf_config == RF_819X_MAX_TYPE) {
++//		HAL_DATA_TYPE *phal = GET_HAL_DATA(padapter);
++//		switch (phal->rf_type) {
++		switch (GET_RF_TYPE(padapter)) {
++			case RF_1T1R:
++				pmppriv->antenna_tx = ANTENNA_A;
++				pmppriv->antenna_rx = ANTENNA_A;
++				break;
++			case RF_1T2R:
++			default:
++				pmppriv->antenna_tx = ANTENNA_A;
++				pmppriv->antenna_rx = ANTENNA_AB;
++				break;
++			case RF_2T2R:
++			case RF_2T2R_GREEN:
++				pmppriv->antenna_tx = ANTENNA_AB;
++				pmppriv->antenna_rx = ANTENNA_AB;
++				break;
++			case RF_2T4R:
++				pmppriv->antenna_tx = ANTENNA_AB;
++				pmppriv->antenna_rx = ANTENNA_ABCD;
++				break;
++		}
++	}
++#endif
++	mpt_ProStartTest(padapter);
++
++	//3 1. initialize a new WLAN_BSSID_EX
++//	_rtw_memset(&bssid, 0, sizeof(WLAN_BSSID_EX));
++	_rtw_memcpy(bssid.MacAddress, pmppriv->network_macaddr, ETH_ALEN);
++	bssid.Ssid.SsidLength = strlen("mp_pseudo_adhoc");
++	_rtw_memcpy(bssid.Ssid.Ssid, (u8*)"mp_pseudo_adhoc", bssid.Ssid.SsidLength);
++	bssid.InfrastructureMode = Ndis802_11IBSS;
++	bssid.NetworkTypeInUse = Ndis802_11DS;
++	bssid.IELength = 0;
++
++	length = get_WLAN_BSSID_EX_sz(&bssid);
++	if (length % 4)
++		bssid.Length = ((length >> 2) + 1) << 2; //round up to multiple of 4 bytes.
++	else
++		bssid.Length = length;
++
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++
++	if (check_fwstate(pmlmepriv, WIFI_MP_STATE) == _TRUE)
++		goto end_of_mp_start_test;
++
++	//init mp_start_test status
++	if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) {
++		rtw_disassoc_cmd(padapter, 500, _TRUE);
++		rtw_indicate_disconnect(padapter);
++		rtw_free_assoc_resources(padapter, 1);
++	}
++	pmppriv->prev_fw_state = get_fwstate(pmlmepriv);
++	pmlmepriv->fw_state = WIFI_MP_STATE;
++#if 0
++	if (pmppriv->mode == _LOOPBOOK_MODE_) {
++		set_fwstate(pmlmepriv, WIFI_MP_LPBK_STATE); //append txdesc
++		RT_TRACE(_module_mp_, _drv_notice_, ("+start mp in Lookback mode\n"));
++	} else {
++		RT_TRACE(_module_mp_, _drv_notice_, ("+start mp in normal mode\n"));
++	}
++#endif
++	set_fwstate(pmlmepriv, _FW_UNDER_LINKING);
++
++	//3 2. create a new psta for mp driver
++	//clear psta in the cur_network, if any
++	psta = rtw_get_stainfo(&padapter->stapriv, tgt_network->network.MacAddress);
++	if (psta) rtw_free_stainfo(padapter, psta);
++
++	psta = rtw_alloc_stainfo(&padapter->stapriv, bssid.MacAddress);
++	if (psta == NULL) {
++		RT_TRACE(_module_mp_, _drv_err_, ("mp_start_test: Can't alloc sta_info!\n"));
++		pmlmepriv->fw_state = pmppriv->prev_fw_state;
++		res = _FAIL;
++		goto end_of_mp_start_test;
++	}
++
++	//3 3. join psudo AdHoc
++	tgt_network->join_res = 1;
++	tgt_network->aid = psta->aid = 1;
++	_rtw_memcpy(&tgt_network->network, &bssid, length);
++
++	rtw_indicate_connect(padapter);
++	_clr_fwstate_(pmlmepriv, _FW_UNDER_LINKING);
++
++end_of_mp_start_test:
++
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++
++	if (res == _SUCCESS)
++	{
++		// set MSR to WIFI_FW_ADHOC_STATE
++#if  defined (CONFIG_RTL8192C)  ||  defined (CONFIG_RTL8192D)
++		val8 = rtw_read8(padapter, MSR) & 0xFC; // 0x0102
++		val8 |= WIFI_FW_ADHOC_STATE;
++		rtw_write8(padapter, MSR, val8); // Link in ad hoc network
++#endif
++
++#if  !defined (CONFIG_RTL8192C)  &&  !defined (CONFIG_RTL8192D)
++		rtw_write8(padapter, MSR, 1); // Link in ad hoc network
++		rtw_write8(padapter, RCR, 0); // RCR : disable all pkt, 0x10250048
++		rtw_write8(padapter, RCR+2, 0x57); // RCR disable Check BSSID, 0x1025004a
++
++		// disable RX filter map , mgt frames will put in RX FIFO 0
++		rtw_write16(padapter, RXFLTMAP0, 0x0); // 0x10250116
++
++		val8 = rtw_read8(padapter, EE_9346CR); // 0x1025000A
++		if (!(val8 & _9356SEL))//boot from EFUSE
++			efuse_change_max_size(padapter);
++#endif
++	}
++
++	return res;
++}
++//------------------------------------------------------------------------------
++//This function change the DUT from the MP test mode into normal mode
++void mp_stop_test(PADAPTER padapter)
++{
++	struct mp_priv *pmppriv = &padapter->mppriv;
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	struct wlan_network *tgt_network = &pmlmepriv->cur_network;
++	struct sta_info *psta;
++
++	_irqL irqL;
++
++
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++
++	if (check_fwstate(pmlmepriv, WIFI_MP_STATE) == _FALSE)
++		goto end_of_mp_stop_test;
++
++	//3 1. disconnect psudo AdHoc
++	rtw_indicate_disconnect(padapter);
++
++	//3 2. clear psta used in mp test mode.
++//	rtw_free_assoc_resources(padapter, 1);
++	psta = rtw_get_stainfo(&padapter->stapriv, tgt_network->network.MacAddress);
++	if (psta) rtw_free_stainfo(padapter, psta);
++
++	//3 3. return to normal state (default:station mode)
++	pmlmepriv->fw_state = pmppriv->prev_fw_state; // WIFI_STATION_STATE;
++
++	//flush the cur_network
++	_rtw_memset(tgt_network, 0, sizeof(struct wlan_network));
++
++	_clr_fwstate_(pmlmepriv, WIFI_MP_STATE);
++
++end_of_mp_stop_test:
++
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++}
++/*---------------------------hal\rtl8192c\MPT_Phy.c---------------------------*/
++#if 0
++//#ifdef CONFIG_USB_HCI
++static VOID mpt_AdjustRFRegByRateByChan92CU(PADAPTER pAdapter, u8 RateIdx, u8 Channel, u8 BandWidthID)
++{
++	u8		eRFPath;
++	u32		rfReg0x26;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++
++
++	if (RateIdx < MPT_RATE_6M) {	// CCK rate,for 88cu
++		rfReg0x26 = 0xf400;
++	}
++	else if ((RateIdx >= MPT_RATE_6M) && (RateIdx <= MPT_RATE_54M)) {// OFDM rate,for 88cu
++		if ((4 == Channel) || (8 == Channel) || (12 == Channel))
++			rfReg0x26 = 0xf000;
++		else if ((5 == Channel) || (7 == Channel) || (13 == Channel) || (14 == Channel))
++			rfReg0x26 = 0xf400;
++		else
++			rfReg0x26 = 0x4f200;
++	}
++	else if ((RateIdx >= MPT_RATE_MCS0) && (RateIdx <= MPT_RATE_MCS15)) {// MCS 20M ,for 88cu // MCS40M rate,for 88cu
++
++		if (HT_CHANNEL_WIDTH_20 == BandWidthID) {
++			if ((4 == Channel) || (8 == Channel))
++				rfReg0x26 = 0xf000;
++			else if ((5 == Channel) || (7 == Channel) || (13 == Channel) || (14 == Channel))
++				rfReg0x26 = 0xf400;
++			else
++				rfReg0x26 = 0x4f200;
++		}
++		else{
++			if ((4 == Channel) || (8 == Channel))
++				rfReg0x26 = 0xf000;
++			else if ((5 == Channel) || (7 == Channel))
++				rfReg0x26 = 0xf400;
++			else
++				rfReg0x26 = 0x4f200;
++		}
++	}
++
++//	RT_TRACE(COMP_CMD, DBG_LOUD, ("\n mpt_AdjustRFRegByRateByChan92CU():Chan:%d Rate=%d rfReg0x26:0x%08x\n",Channel, RateIdx,rfReg0x26));
++	for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++) {
++		write_rfreg(pAdapter, eRFPath, RF_SYN_G2, rfReg0x26);
++	}
++}
++#endif
++/*-----------------------------------------------------------------------------
++ * Function:	mpt_SwitchRfSetting
++ *
++ * Overview:	Change RF Setting when we siwthc channel/rate/BW for MP.
++ *
++ * Input:       IN	PADAPTER				pAdapter
++ *
++ * Output:      NONE
++ *
++ * Return:      NONE
++ *
++ * Revised History:
++ * When			Who		Remark
++ * 01/08/2009	MHC		Suggestion from SD3 Willis for 92S series.
++ * 01/09/2009	MHC		Add CCK modification for 40MHZ. Suggestion from SD3.
++ *
++ *---------------------------------------------------------------------------*/
++static void mpt_SwitchRfSetting(PADAPTER pAdapter)
++{
++	Hal_mpt_SwitchRfSetting(pAdapter);
++    }
++
++/*---------------------------hal\rtl8192c\MPT_Phy.c---------------------------*/
++/*---------------------------hal\rtl8192c\MPT_HelperFunc.c---------------------------*/
++static void MPT_CCKTxPowerAdjust(PADAPTER Adapter, BOOLEAN bInCH14)
++{
++	Hal_MPT_CCKTxPowerAdjust(Adapter,bInCH14);
++}
++
++static void MPT_CCKTxPowerAdjustbyIndex(PADAPTER pAdapter, BOOLEAN beven)
++{
++	Hal_MPT_CCKTxPowerAdjustbyIndex(pAdapter,beven);
++	}
++
++/*---------------------------hal\rtl8192c\MPT_HelperFunc.c---------------------------*/
++
++/*
++ * SetChannel
++ * Description
++ *	Use H2C command to change channel,
++ *	not only modify rf register, but also other setting need to be done.
++ */
++void SetChannel(PADAPTER pAdapter)
++{
++	Hal_SetChannel(pAdapter);
++
++}
++
++/*
++ * Notice
++ *	Switch bandwitdth may change center frequency(channel)
++ */
++void SetBandwidth(PADAPTER pAdapter)
++{
++	Hal_SetBandwidth(pAdapter);
++
++}
++
++static void SetCCKTxPower(PADAPTER pAdapter, u8 *TxPower)
++{
++	Hal_SetCCKTxPower(pAdapter,TxPower);
++}
++
++static void SetOFDMTxPower(PADAPTER pAdapter, u8 *TxPower)
++{
++	Hal_SetOFDMTxPower(pAdapter,TxPower);
++	}
++
++
++void SetAntenna(PADAPTER pAdapter)
++	{
++	Hal_SetAntenna(pAdapter);
++}
++
++void	SetAntennaPathPower(PADAPTER pAdapter)
++{
++	Hal_SetAntennaPathPower(pAdapter);
++}
++	
++void SetTxPower(PADAPTER pAdapter)
++{
++	Hal_SetTxPower(pAdapter);
++	}
++
++void SetTxAGCOffset(PADAPTER pAdapter, u32 ulTxAGCOffset)
++{
++	u32 TxAGCOffset_B, TxAGCOffset_C, TxAGCOffset_D,tmpAGC;
++
++	TxAGCOffset_B = (ulTxAGCOffset&0x000000ff);
++	TxAGCOffset_C = ((ulTxAGCOffset&0x0000ff00)>>8);
++	TxAGCOffset_D = ((ulTxAGCOffset&0x00ff0000)>>16);
++
++	tmpAGC = (TxAGCOffset_D<<8 | TxAGCOffset_C<<4 | TxAGCOffset_B);
++	write_bbreg(pAdapter, rFPGA0_TxGainStage,
++			(bXBTxAGC|bXCTxAGC|bXDTxAGC), tmpAGC);
++}
++
++void SetDataRate(PADAPTER pAdapter)
++{
++	Hal_SetDataRate(pAdapter);
++}
++
++#if  !defined (CONFIG_RTL8192C)  &&  !defined (CONFIG_RTL8192D)
++/*------------------------------Define structure----------------------------*/
++typedef struct _R_ANTENNA_SELECT_OFDM {
++	u32	r_tx_antenna:4;
++	u32	r_ant_l:4;
++	u32	r_ant_non_ht:4;
++	u32	r_ant_ht1:4;
++	u32	r_ant_ht2:4;
++	u32	r_ant_ht_s1:4;
++	u32	r_ant_non_ht_s1:4;
++	u32	OFDM_TXSC:2;
++	u32	Reserved:2;
++}R_ANTENNA_SELECT_OFDM;
++
++typedef struct _R_ANTENNA_SELECT_CCK {
++	u8	r_cckrx_enable_2:2;
++	u8	r_cckrx_enable:2;
++	u8	r_ccktx_enable:4;
++}R_ANTENNA_SELECT_CCK;
++#endif
++
++s32 SetThermalMeter(PADAPTER pAdapter, u8 target_ther)
++{
++	return Hal_SetThermalMeter( pAdapter, target_ther);
++}
++
++static void TriggerRFThermalMeter(PADAPTER pAdapter)
++{
++	Hal_TriggerRFThermalMeter(pAdapter);
++}
++
++static u8 ReadRFThermalMeter(PADAPTER pAdapter)
++{
++	return Hal_ReadRFThermalMeter(pAdapter);
++}
++
++void GetThermalMeter(PADAPTER pAdapter, u8 *value)
++{
++	Hal_GetThermalMeter(pAdapter,value);
++}
++
++void SetSingleCarrierTx(PADAPTER pAdapter, u8 bStart)
++{
++	Hal_SetSingleCarrierTx(pAdapter,bStart);
++}
++
++void SetSingleToneTx(PADAPTER pAdapter, u8 bStart)
++{
++	Hal_SetSingleToneTx(pAdapter,bStart);
++}
++
++void SetCarrierSuppressionTx(PADAPTER pAdapter, u8 bStart)
++{
++	Hal_SetCarrierSuppressionTx(pAdapter, bStart);
++}
++
++void SetCCKContinuousTx(PADAPTER pAdapter, u8 bStart)
++		{
++	Hal_SetCCKContinuousTx(pAdapter,bStart);
++		}
++
++void SetOFDMContinuousTx(PADAPTER pAdapter, u8 bStart)
++        {
++   Hal_SetOFDMContinuousTx( pAdapter, bStart);
++}/* mpt_StartOfdmContTx */
++
++void SetContinuousTx(PADAPTER pAdapter, u8 bStart)
++{
++	Hal_SetContinuousTx(pAdapter,bStart);
++}
++
++//------------------------------------------------------------------------------
++static void dump_mpframe(PADAPTER padapter, struct xmit_frame *pmpframe)
++{
++	rtw_hal_mgnt_xmit(padapter, pmpframe);
++}
++
++static struct xmit_frame *alloc_mp_xmitframe(struct xmit_priv *pxmitpriv)
++{
++	struct xmit_frame	*pmpframe;
++	struct xmit_buf	*pxmitbuf;
++
++	if ((pmpframe = rtw_alloc_xmitframe(pxmitpriv)) == NULL)
++	{
++		return NULL;
++	}
++
++	if ((pxmitbuf = rtw_alloc_xmitbuf(pxmitpriv)) == NULL)
++	{
++		rtw_free_xmitframe(pxmitpriv, pmpframe);
++		return NULL;
++	}
++
++	pmpframe->frame_tag = MP_FRAMETAG;
++
++	pmpframe->pxmitbuf = pxmitbuf;
++
++	pmpframe->buf_addr = pxmitbuf->pbuf;
++
++	pxmitbuf->priv_data = pmpframe;
++
++	return pmpframe;
++
++}
++
++static thread_return mp_xmit_packet_thread(thread_context context)
++{
++	struct xmit_frame	*pxmitframe;
++	struct mp_tx		*pmptx;
++	struct mp_priv	*pmp_priv;
++	struct xmit_priv	*pxmitpriv;
++	PADAPTER padapter;
++
++	pmp_priv = (struct mp_priv *)context;
++	pmptx = &pmp_priv->tx;
++	padapter = pmp_priv->papdater;
++	pxmitpriv = &(padapter->xmitpriv);
++
++	thread_enter("RTW_MP_THREAD");
++
++	DBG_871X("%s:pkTx Start\n", __func__);
++	while (1) {
++		pxmitframe = alloc_mp_xmitframe(pxmitpriv);
++		if (pxmitframe == NULL) {
++			if (pmptx->stop ||
++			    padapter->bSurpriseRemoved ||
++			    padapter->bDriverStopped) {
++				goto exit;
++			}
++			else {
++				rtw_msleep_os(1);
++				continue;
++			}
++		}
++
++		_rtw_memcpy((u8 *)(pxmitframe->buf_addr+TXDESC_OFFSET), pmptx->buf, pmptx->write_size);
++		_rtw_memcpy(&(pxmitframe->attrib), &(pmptx->attrib), sizeof(struct pkt_attrib));
++
++		dump_mpframe(padapter, pxmitframe);
++
++		pmptx->sended++;
++		pmp_priv->tx_pktcount++;
++
++		if (pmptx->stop ||
++		    padapter->bSurpriseRemoved ||
++		    padapter->bDriverStopped)
++			goto exit;
++		if ((pmptx->count != 0) &&
++		    (pmptx->count == pmptx->sended))
++			goto exit;
++
++		flush_signals_thread();
++	}
++
++exit:
++	//DBG_871X("%s:pkTx Exit\n", __func__);
++	rtw_mfree(pmptx->pallocated_buf, pmptx->buf_size);
++	pmptx->pallocated_buf = NULL;
++	pmptx->stop = 1;
++
++	thread_exit();
++}
++
++void fill_txdesc_for_mp(PADAPTER padapter, struct tx_desc *ptxdesc)
++{		
++	struct mp_priv *pmp_priv = &padapter->mppriv;
++	_rtw_memcpy(ptxdesc, &(pmp_priv->tx.desc), TXDESC_SIZE);
++}
++
++void SetPacketTx(PADAPTER padapter)
++{
++	u8 *ptr, *pkt_start, *pkt_end;
++	u32 pkt_size;
++	struct tx_desc *desc;
++	struct rtw_ieee80211_hdr *hdr;
++	u8 payload;
++	s32 bmcast;
++	struct pkt_attrib *pattrib;
++	struct mp_priv *pmp_priv;
++
++
++	pmp_priv = &padapter->mppriv;
++	if (pmp_priv->tx.stop) return;
++	pmp_priv->tx.sended = 0;
++	pmp_priv->tx.stop = 0;
++	pmp_priv->tx_pktcount = 0;
++
++	//3 1. update_attrib()
++	pattrib = &pmp_priv->tx.attrib;
++	_rtw_memcpy(pattrib->src, padapter->eeprompriv.mac_addr, ETH_ALEN);
++	_rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN);
++	_rtw_memcpy(pattrib->ra, pattrib->dst, ETH_ALEN);
++	bmcast = IS_MCAST(pattrib->ra);
++	if (bmcast) {
++		pattrib->mac_id = 1;
++		pattrib->psta = rtw_get_bcmc_stainfo(padapter);
++	} else {
++		pattrib->mac_id = 0;
++		pattrib->psta = rtw_get_stainfo(&padapter->stapriv, get_bssid(&padapter->mlmepriv));
++	}
++
++	pattrib->last_txcmdsz = pattrib->hdrlen + pattrib->pktlen;
++
++	//3 2. allocate xmit buffer
++	pkt_size = pattrib->last_txcmdsz;
++
++	if (pmp_priv->tx.pallocated_buf)
++		rtw_mfree(pmp_priv->tx.pallocated_buf, pmp_priv->tx.buf_size);
++	pmp_priv->tx.write_size = pkt_size;
++	pmp_priv->tx.buf_size = pkt_size + XMITBUF_ALIGN_SZ;
++	pmp_priv->tx.pallocated_buf = rtw_zmalloc(pmp_priv->tx.buf_size);
++	if (pmp_priv->tx.pallocated_buf == NULL) {
++		DBG_871X("%s: malloc(%d) fail!!\n", __func__, pmp_priv->tx.buf_size);
++		return;
++	}
++	pmp_priv->tx.buf = (u8 *)N_BYTE_ALIGMENT((SIZE_PTR)(pmp_priv->tx.pallocated_buf), XMITBUF_ALIGN_SZ);
++	ptr = pmp_priv->tx.buf;
++
++	desc = &(pmp_priv->tx.desc);
++	_rtw_memset(desc, 0, TXDESC_SIZE);
++	pkt_start = ptr;
++	pkt_end = pkt_start + pkt_size;
++
++	//3 3. init TX descriptor
++	// offset 0
++	//desc->txdw0 |= cpu_to_le32(pkt_size & 0x0000FFFF); // packet size
++	//desc->txdw0 |= cpu_to_le32(OWN | FSG | LSG);
++	//desc->txdw0 |= cpu_to_le32(((TXDESC_SIZE + OFFSET_SZ) << OFFSET_SHT) & 0x00FF0000); //32 bytes for TX Desc
++	//if (bmcast) desc->txdw0 |= cpu_to_le32(BMC); // broadcast packet
++
++	// offset 4
++	desc->txdw1 |= cpu_to_le32(BK); // don't aggregate(AMPDU)
++	desc->txdw1 |= cpu_to_le32((pattrib->mac_id) & 0x1F); //CAM_ID(MAC_ID)
++	desc->txdw1 |= cpu_to_le32((pattrib->qsel << QSEL_SHT) & 0x00001F00); // Queue Select, TID
++	desc->txdw1 |= cpu_to_le32((pattrib->raid << Rate_ID_SHT) & 0x000F0000); // Rate Adaptive ID
++
++	// offset 8
++	// offset 12
++	//desc->txdw3 |= cpu_to_le32((pattrib->seqnum << SEQ_SHT) & 0xffff0000);
++
++	// offset 16
++	//desc->txdw4 |= cpu_to_le32(QoS);
++	desc->txdw4 |= cpu_to_le32(HW_SEQ_EN);
++	desc->txdw4 |= cpu_to_le32(USERATE);
++	desc->txdw4 |= cpu_to_le32(DISDATAFB);
++
++	if( pmp_priv->preamble ){
++		if (pmp_priv->rateidx <=  MPT_RATE_54M)
++			desc->txdw4 |= cpu_to_le32(DATA_SHORT); // CCK Short Preamble
++	}
++	if (pmp_priv->bandwidth == HT_CHANNEL_WIDTH_40)
++		desc->txdw4 |= cpu_to_le32(DATA_BW);
++
++	// offset 20
++	desc->txdw5 |= cpu_to_le32(pmp_priv->rateidx & 0x0000001F);
++
++	if( pmp_priv->preamble ){
++		if (pmp_priv->rateidx > MPT_RATE_54M)
++			desc->txdw5 |= cpu_to_le32(SGI); // MCS Short Guard Interval
++	}
++	desc->txdw5 |= cpu_to_le32(0x0001FF00); // DATA/RTS Rate Fallback Limit
++
++	//3 4. make wlan header, make_wlanhdr()
++	hdr = (struct rtw_ieee80211_hdr *)pkt_start;
++	SetFrameSubType(&hdr->frame_ctl, pattrib->subtype);
++	_rtw_memcpy(hdr->addr1, pattrib->dst, ETH_ALEN); // DA
++	_rtw_memcpy(hdr->addr2, pattrib->src, ETH_ALEN); // SA
++	_rtw_memcpy(hdr->addr3, get_bssid(&padapter->mlmepriv), ETH_ALEN); // RA, BSSID
++
++	//3 5. make payload
++	ptr = pkt_start + pattrib->hdrlen;
++
++	switch (pmp_priv->tx.payload) {
++		case 0:
++			payload = 0x00;
++			break;
++		case 1:
++			payload = 0x5a;
++			break;
++		case 2:
++			payload = 0xa5;
++			break;
++		case 3:
++			payload = 0xff;
++			break;
++		default:
++			payload = 0x00;
++			break;
++	}
++
++	_rtw_memset(ptr, payload, pkt_end - ptr);
++
++	//3 6. start thread
++#ifdef PLATFORM_LINUX
++	pmp_priv->tx.PktTxThread = kthread_run(mp_xmit_packet_thread, pmp_priv, "RTW_MP_THREAD");
++	if (IS_ERR(pmp_priv->tx.PktTxThread))
++		DBG_871X("Create PktTx Thread Fail !!!!!\n");
++#endif
++#ifdef PLATFORM_FREEBSD
++{
++	struct proc *p;
++	struct thread *td;
++	pmp_priv->tx.PktTxThread = kproc_kthread_add(mp_xmit_packet_thread, pmp_priv,
++					&p, &td, RFHIGHPID, 0, "MPXmitThread", "MPXmitThread");
++
++	if (pmp_priv->tx.PktTxThread < 0)
++		DBG_871X("Create PktTx Thread Fail !!!!!\n");
++}
++#endif
++}
++
++void SetPacketRx(PADAPTER pAdapter, u8 bStartRx)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++
++	if(bStartRx)
++	{
++		pHalData->ReceiveConfig = AAP | APM | AM | AB | APP_ICV | ADF | AMF | HTC_LOC_CTRL | APP_MIC | APP_PHYSTS;
++	
++		pHalData->ReceiveConfig |= ACRC32;
++	
++		rtw_write32(pAdapter, REG_RCR, pHalData->ReceiveConfig);
++
++		// Accept all data frames
++		rtw_write16(pAdapter, REG_RXFLTMAP2, 0xFFFF);
++	}
++	else
++	{
++		rtw_write32(pAdapter, REG_RCR, 0);
++	}
++}
++
++void ResetPhyRxPktCount(PADAPTER pAdapter)
++{
++	u32 i, phyrx_set = 0;
++
++	for (i = 0; i <= 0xF; i++) {
++		phyrx_set = 0;
++		phyrx_set |= _RXERR_RPT_SEL(i);	//select
++		phyrx_set |= RXERR_RPT_RST;	// set counter to zero
++		rtw_write32(pAdapter, REG_RXERR_RPT, phyrx_set);
++	}
++}
++
++static u32 GetPhyRxPktCounts(PADAPTER pAdapter, u32 selbit)
++{
++	//selection
++	u32 phyrx_set = 0, count = 0;
++
++	phyrx_set = _RXERR_RPT_SEL(selbit & 0xF);
++	rtw_write32(pAdapter, REG_RXERR_RPT, phyrx_set);
++
++	//Read packet count
++	count = rtw_read32(pAdapter, REG_RXERR_RPT) & RXERR_COUNTER_MASK;
++
++	return count;
++}
++
++u32 GetPhyRxPktReceived(PADAPTER pAdapter)
++{
++	u32 OFDM_cnt = 0, CCK_cnt = 0, HT_cnt = 0;
++
++	OFDM_cnt = GetPhyRxPktCounts(pAdapter, RXERR_TYPE_OFDM_MPDU_OK);
++	CCK_cnt = GetPhyRxPktCounts(pAdapter, RXERR_TYPE_CCK_MPDU_OK);
++	HT_cnt = GetPhyRxPktCounts(pAdapter, RXERR_TYPE_HT_MPDU_OK);
++
++	return OFDM_cnt + CCK_cnt + HT_cnt;
++}
++
++u32 GetPhyRxPktCRC32Error(PADAPTER pAdapter)
++{
++	u32 OFDM_cnt = 0, CCK_cnt = 0, HT_cnt = 0;
++
++	OFDM_cnt = GetPhyRxPktCounts(pAdapter, RXERR_TYPE_OFDM_MPDU_FAIL);
++	CCK_cnt = GetPhyRxPktCounts(pAdapter, RXERR_TYPE_CCK_MPDU_FAIL);
++	HT_cnt = GetPhyRxPktCounts(pAdapter, RXERR_TYPE_HT_MPDU_FAIL);
++
++	return OFDM_cnt + CCK_cnt + HT_cnt;
++}
++
++//reg 0x808[9:0]: FFT data x
++//reg 0x808[22]:  0  -->  1  to get 1 FFT data y
++//reg 0x8B4[15:0]: FFT data y report
++static u32 GetPSDData(PADAPTER pAdapter, u32 point)
++{
++	int psd_val;
++
++
++	psd_val = rtw_read32(pAdapter, 0x808);
++	psd_val &= 0xFFBFFC00;
++	psd_val |= point;
++
++	rtw_write32(pAdapter, 0x808, psd_val);
++	rtw_mdelay_os(1);
++	psd_val |= 0x00400000;
++
++	rtw_write32(pAdapter, 0x808, psd_val);
++	rtw_mdelay_os(1);
++	psd_val = rtw_read32(pAdapter, 0x8B4);
++
++	psd_val &= 0x0000FFFF;
++
++	return psd_val;
++}
++
++/*
++ * pts	start_point_min		stop_point_max
++ * 128	64			64 + 128 = 192
++ * 256	128			128 + 256 = 384
++ * 512	256			256 + 512 = 768
++ * 1024	512			512 + 1024 = 1536
++ *
++ */
++u32 mp_query_psd(PADAPTER pAdapter, u8 *data)
++{
++	u32 i, psd_pts=0, psd_start=0, psd_stop=0;
++	u32 psd_data=0;
++	
++#ifdef PLATFORM_LINUX
++	if (!netif_running(pAdapter->pnetdev)) {
++		RT_TRACE(_module_mp_, _drv_warning_, ("mp_query_psd: Fail! interface not opened!\n"));
++		return 0;
++	}
++#endif
++
++	if (check_fwstate(&pAdapter->mlmepriv, WIFI_MP_STATE) == _FALSE) {
++		RT_TRACE(_module_mp_, _drv_warning_, ("mp_query_psd: Fail! not in MP mode!\n"));
++		return 0;
++	}
++
++	if (strlen(data) == 0) { //default value
++		psd_pts = 128;
++		psd_start = 64;
++		psd_stop = 128;   
++	} else {
++		sscanf(data, "pts=%d,start=%d,stop=%d", &psd_pts, &psd_start, &psd_stop);
++	}
++
++	_rtw_memset(data, '\0', sizeof(data));
++
++	i = psd_start;
++	while (i < psd_stop)
++	{
++		if (i >= psd_pts) {
++			psd_data = GetPSDData(pAdapter, i-psd_pts);
++		} else {
++			psd_data = GetPSDData(pAdapter, i);
++		}
++		sprintf(data, "%s%x ", data, psd_data);
++		i++;
++	}
++
++	#ifdef CONFIG_LONG_DELAY_ISSUE
++	rtw_msleep_os(100);
++	#else
++	rtw_mdelay_os(100);
++	#endif
++
++	return strlen(data)+1;
++}
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_mp_ioctl.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_mp_ioctl.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_mp_ioctl.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_mp_ioctl.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,2954 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _RTW_MP_IOCTL_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <mlme_osdep.h>
++
++//#include <rtw_mp.h>
++#include <rtw_mp_ioctl.h>
++
++
++//****************  oid_rtl_seg_81_85   section start ****************
++NDIS_STATUS oid_rt_wireless_mode_hdl(struct oid_par_priv *poid_par_priv)
++{
++	NDIS_STATUS status = NDIS_STATUS_SUCCESS;
++	PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	if (poid_par_priv->information_buf_len < sizeof(u8))
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	if (poid_par_priv->type_of_oid == SET_OID) {
++		Adapter->registrypriv.wireless_mode = *(u8*)poid_par_priv->information_buf;
++	} else if (poid_par_priv->type_of_oid == QUERY_OID) {
++		*(u8*)poid_par_priv->information_buf = Adapter->registrypriv.wireless_mode;
++		*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++		 RT_TRACE(_module_mp_, _drv_info_, ("-query Wireless Mode=%d\n", Adapter->registrypriv.wireless_mode));
++	} else {
++		status = NDIS_STATUS_NOT_ACCEPTED;
++	}
++
++_func_exit_;
++
++	return status;
++}
++//****************  oid_rtl_seg_81_87_80   section start ****************
++NDIS_STATUS oid_rt_pro_write_bb_reg_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL oldirql;
++#endif
++	struct bb_reg_param *pbbreg;
++	u16 offset;
++	u32 value;
++	NDIS_STATUS status = NDIS_STATUS_SUCCESS;
++	PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro_write_bb_reg_hdl\n"));
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	if (poid_par_priv->information_buf_len < sizeof(struct bb_reg_param))
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	pbbreg = (struct bb_reg_param *)(poid_par_priv->information_buf);
++
++	offset = (u16)(pbbreg->offset) & 0xFFF; //0ffset :0x800~0xfff
++	if (offset < BB_REG_BASE_ADDR) offset |= BB_REG_BASE_ADDR;
++
++	value = pbbreg->value;
++
++	RT_TRACE(_module_mp_, _drv_notice_,
++		 ("oid_rt_pro_write_bb_reg_hdl: offset=0x%03X value=0x%08X\n",
++		  offset, value));
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	write_bbreg(Adapter, offset, 0xFFFFFFFF, value);
++	_irqlevel_changed_(&oldirql, RAISE);
++
++_func_exit_;
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_read_bb_reg_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL oldirql;
++#endif
++	struct bb_reg_param *pbbreg;
++	u16 offset;
++	u32 value;
++	NDIS_STATUS status = NDIS_STATUS_SUCCESS;
++	PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro_read_bb_reg_hdl\n"));
++
++	if (poid_par_priv->type_of_oid != QUERY_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	if (poid_par_priv->information_buf_len < sizeof(struct bb_reg_param))
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	pbbreg = (struct bb_reg_param *)(poid_par_priv->information_buf);
++
++	offset = (u16)(pbbreg->offset) & 0xFFF; //0ffset :0x800~0xfff
++	if (offset < BB_REG_BASE_ADDR) offset |= BB_REG_BASE_ADDR;
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	value = read_bbreg(Adapter, offset, 0xFFFFFFFF);
++	_irqlevel_changed_(&oldirql, RAISE);
++
++	pbbreg->value = value;
++	*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++
++	RT_TRACE(_module_mp_, _drv_notice_,
++		 ("-oid_rt_pro_read_bb_reg_hdl: offset=0x%03X value:0x%08X\n",
++		  offset, value));
++_func_exit_;
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_write_rf_reg_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL oldirql;
++#endif
++	struct rf_reg_param *pbbreg;
++	u8 path;
++	u8 offset;
++	u32 value;
++	NDIS_STATUS status = NDIS_STATUS_SUCCESS;
++	PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro_write_rf_reg_hdl\n"));
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	if (poid_par_priv->information_buf_len < sizeof(struct rf_reg_param))
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	pbbreg = (struct rf_reg_param *)(poid_par_priv->information_buf);
++
++	if (pbbreg->path >= MAX_RF_PATH_NUMS)
++		return NDIS_STATUS_NOT_ACCEPTED;
++	if (pbbreg->offset > 0xFF)
++		return NDIS_STATUS_NOT_ACCEPTED;
++	if (pbbreg->value > 0xFFFFF)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	path = (u8)pbbreg->path;
++	offset = (u8)pbbreg->offset;
++	value = pbbreg->value;
++
++	RT_TRACE(_module_mp_, _drv_notice_,
++		 ("oid_rt_pro_write_rf_reg_hdl: path=%d offset=0x%02X value=0x%05X\n",
++		  path, offset, value));
++
++	_irqlevel_changed_(&oldirql, LOWER);
++ 	write_rfreg(Adapter, path, offset, value);
++	_irqlevel_changed_(&oldirql, RAISE);
++
++_func_exit_;
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_read_rf_reg_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL oldirql;
++#endif
++	struct rf_reg_param *pbbreg;
++	u8 path;
++	u8 offset;
++	u32 value;
++	PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++	NDIS_STATUS status = NDIS_STATUS_SUCCESS;
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro_read_rf_reg_hdl\n"));
++
++	if (poid_par_priv->type_of_oid != QUERY_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	if (poid_par_priv->information_buf_len < sizeof(struct rf_reg_param))
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	pbbreg = (struct rf_reg_param *)(poid_par_priv->information_buf);
++
++	if (pbbreg->path >= MAX_RF_PATH_NUMS)
++		return NDIS_STATUS_NOT_ACCEPTED;
++	if (pbbreg->offset > 0xFF)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	path = (u8)pbbreg->path;
++	offset = (u8)pbbreg->offset;
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	value = read_rfreg(Adapter, path, offset);
++	_irqlevel_changed_(&oldirql, RAISE);
++
++	pbbreg->value = value;
++
++	*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++
++	RT_TRACE(_module_mp_, _drv_notice_,
++		 ("-oid_rt_pro_read_rf_reg_hdl: path=%d offset=0x%02X value=0x%05X\n",
++		  path, offset, value));
++
++_func_exit_;
++
++	return status;
++}
++//****************  oid_rtl_seg_81_87_00   section end****************
++//------------------------------------------------------------------------------
++
++//****************  oid_rtl_seg_81_80_00   section start ****************
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_set_data_rate_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	u32		ratevalue;//4
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_notice_,
++		 ("+oid_rt_pro_set_data_rate_hdl\n"));
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	if (poid_par_priv->information_buf_len != sizeof(u32))
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	ratevalue = *((u32*)poid_par_priv->information_buf);//4
++	RT_TRACE(_module_mp_, _drv_notice_,
++		 ("oid_rt_pro_set_data_rate_hdl: data rate idx=%d\n", ratevalue));
++	if (ratevalue >= MPT_RATE_LAST)
++		return NDIS_STATUS_INVALID_DATA;
++
++	Adapter->mppriv.rateidx = ratevalue;
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	SetDataRate(Adapter);
++	_irqlevel_changed_(&oldirql, RAISE);
++
++_func_exit_;
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_start_test_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	u32		mode;
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro_start_test_hdl\n"));
++
++	if (Adapter->registrypriv.mp_mode == 0)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	_irqlevel_changed_(&oldirql, LOWER);
++
++	//IQCalibrateBcut(Adapter);
++
++	mode = *((u32*)poid_par_priv->information_buf);
++	Adapter->mppriv.mode = mode;// 1 for loopback
++
++	if (mp_start_test(Adapter) == _FAIL) {
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		goto exit;
++	}
++
++exit:
++	_irqlevel_changed_(&oldirql, RAISE);
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("-oid_rt_pro_start_test_hdl: mp_mode=%d\n", Adapter->mppriv.mode));
++
++_func_exit_;
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_stop_test_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("+Set OID_RT_PRO_STOP_TEST\n"));
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	mp_stop_test(Adapter);
++	_irqlevel_changed_(&oldirql, RAISE);
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("-Set OID_RT_PRO_STOP_TEST\n"));
++
++_func_exit_;
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_set_channel_direct_call_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	u32		Channel;
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro_set_channel_direct_call_hdl\n"));
++
++	if (poid_par_priv->information_buf_len != sizeof(u32))
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	if (poid_par_priv->type_of_oid == QUERY_OID) {
++		*((u32*)poid_par_priv->information_buf) = Adapter->mppriv.channel;
++		return NDIS_STATUS_SUCCESS;
++	}
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	Channel = *((u32*)poid_par_priv->information_buf);
++	RT_TRACE(_module_mp_, _drv_notice_, ("oid_rt_pro_set_channel_direct_call_hdl: Channel=%d\n", Channel));
++	if (Channel > 14)
++		return NDIS_STATUS_NOT_ACCEPTED;
++	Adapter->mppriv.channel = Channel;
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	SetChannel(Adapter);
++	_irqlevel_changed_(&oldirql, RAISE);
++
++_func_exit_;
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_set_bandwidth_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	u16		bandwidth;
++	u16		channel_offset;
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_info_,
++		 ("+oid_rt_set_bandwidth_hdl\n"));
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	if (poid_par_priv->information_buf_len < sizeof(u32))
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	bandwidth = *((u32*)poid_par_priv->information_buf);//4
++	channel_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++
++	if (bandwidth != HT_CHANNEL_WIDTH_40)
++		bandwidth = HT_CHANNEL_WIDTH_20;
++	padapter->mppriv.bandwidth = (u8)bandwidth;
++	padapter->mppriv.prime_channel_offset = (u8)channel_offset;
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	SetBandwidth(padapter);
++	_irqlevel_changed_(&oldirql, RAISE);
++
++	RT_TRACE(_module_mp_, _drv_notice_,
++		 ("-oid_rt_set_bandwidth_hdl: bandwidth=%d channel_offset=%d\n",
++		  bandwidth, channel_offset));
++
++_func_exit_;
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_set_antenna_bb_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	u32		antenna;
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro_set_antenna_bb_hdl\n"));
++
++	if (poid_par_priv->information_buf_len != sizeof(u32))
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	if (poid_par_priv->type_of_oid == SET_OID)
++	{
++		antenna = *(u32*)poid_par_priv->information_buf;
++
++		Adapter->mppriv.antenna_tx = (u16)((antenna & 0xFFFF0000) >> 16);
++		Adapter->mppriv.antenna_rx = (u16)(antenna & 0x0000FFFF);
++		RT_TRACE(_module_mp_, _drv_notice_,
++			 ("oid_rt_pro_set_antenna_bb_hdl: tx_ant=0x%04x rx_ant=0x%04x\n",
++			  Adapter->mppriv.antenna_tx, Adapter->mppriv.antenna_rx));
++
++		_irqlevel_changed_(&oldirql, LOWER);
++		SetAntenna(Adapter);
++		_irqlevel_changed_(&oldirql, RAISE);
++	} else {
++		antenna = (Adapter->mppriv.antenna_tx << 16)|Adapter->mppriv.antenna_rx;
++		*(u32*)poid_par_priv->information_buf = antenna;
++	}
++
++_func_exit_;
++
++	return status;
++}
++
++NDIS_STATUS oid_rt_pro_set_tx_power_control_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	u32		tx_pwr_idx;
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_info_, ("+oid_rt_pro_set_tx_power_control_hdl\n"));
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	if (poid_par_priv->information_buf_len != sizeof(u32))
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	tx_pwr_idx = *((u32*)poid_par_priv->information_buf);
++	if (tx_pwr_idx > MAX_TX_PWR_INDEX_N_MODE)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	Adapter->mppriv.txpoweridx = (u8)tx_pwr_idx;
++
++	RT_TRACE(_module_mp_, _drv_notice_,
++		 ("oid_rt_pro_set_tx_power_control_hdl: idx=0x%2x\n",
++		  Adapter->mppriv.txpoweridx));
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	SetTxPower(Adapter);
++	_irqlevel_changed_(&oldirql, RAISE);
++
++_func_exit_;
++
++	return status;
++}
++
++//------------------------------------------------------------------------------
++//****************  oid_rtl_seg_81_80_20   section start ****************
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_query_tx_packet_sent_hdl(struct oid_par_priv *poid_par_priv)
++{
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	if (poid_par_priv->type_of_oid !=QUERY_OID) {
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}
++
++	if (poid_par_priv->information_buf_len == sizeof(ULONG)) {
++		*(ULONG*)poid_par_priv->information_buf =  Adapter->mppriv.tx_pktcount;
++		*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++	} else {
++		status = NDIS_STATUS_INVALID_LENGTH;
++	}
++
++_func_exit_;
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_query_rx_packet_received_hdl(struct oid_par_priv *poid_par_priv)
++{
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	if (poid_par_priv->type_of_oid != QUERY_OID) {
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}
++	RT_TRACE(_module_mp_, _drv_alert_, ("===> oid_rt_pro_query_rx_packet_received_hdl.\n"));
++	if (poid_par_priv->information_buf_len == sizeof(ULONG)) {
++		*(ULONG*)poid_par_priv->information_buf =  Adapter->mppriv.rx_pktcount;
++		*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++		RT_TRACE(_module_mp_, _drv_alert_, ("recv_ok:%d \n",Adapter->mppriv.rx_pktcount));
++	} else {
++		status = NDIS_STATUS_INVALID_LENGTH;
++	}
++
++_func_exit_;
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_query_rx_packet_crc32_error_hdl(struct oid_par_priv *poid_par_priv)
++{
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	if (poid_par_priv->type_of_oid != QUERY_OID) {
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}
++	RT_TRACE(_module_mp_, _drv_alert_, ("===> oid_rt_pro_query_rx_packet_crc32_error_hdl.\n"));
++	if (poid_par_priv->information_buf_len == sizeof(ULONG)) {
++		*(ULONG*)poid_par_priv->information_buf =  Adapter->mppriv.rx_crcerrpktcount;
++		*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++		RT_TRACE(_module_mp_, _drv_alert_, ("recv_err:%d \n",Adapter->mppriv.rx_crcerrpktcount));
++	} else {
++		status = NDIS_STATUS_INVALID_LENGTH;
++	}
++
++_func_exit_;
++
++	return status;
++}
++//------------------------------------------------------------------------------
++
++NDIS_STATUS oid_rt_pro_reset_tx_packet_sent_hdl(struct oid_par_priv *poid_par_priv)
++{
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	if (poid_par_priv->type_of_oid != SET_OID) {
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}
++
++	RT_TRACE(_module_mp_, _drv_alert_, ("===> oid_rt_pro_reset_tx_packet_sent_hdl.\n"));
++	Adapter->mppriv.tx_pktcount = 0;
++
++_func_exit_;
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_reset_rx_packet_received_hdl(struct oid_par_priv *poid_par_priv)
++{
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++	{
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}
++
++	if (poid_par_priv->information_buf_len == sizeof(ULONG)) {
++		Adapter->mppriv.rx_pktcount = 0;
++		Adapter->mppriv.rx_crcerrpktcount = 0;
++	} else {
++		status = NDIS_STATUS_INVALID_LENGTH;
++	}
++
++_func_exit_;
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_reset_phy_rx_packet_count_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	if (poid_par_priv->type_of_oid != SET_OID) {
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	ResetPhyRxPktCount(Adapter);
++	_irqlevel_changed_(&oldirql, RAISE);
++
++_func_exit_;
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_get_phy_rx_packet_received_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_info_, ("+oid_rt_get_phy_rx_packet_received_hdl\n"));
++
++	if (poid_par_priv->type_of_oid != QUERY_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	if (poid_par_priv->information_buf_len != sizeof(ULONG))
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	*(ULONG*)poid_par_priv->information_buf = GetPhyRxPktReceived(Adapter);
++	_irqlevel_changed_(&oldirql, RAISE);
++
++	*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("-oid_rt_get_phy_rx_packet_received_hdl: recv_ok=%d\n", *(ULONG*)poid_par_priv->information_buf));
++
++_func_exit_;
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_get_phy_rx_packet_crc32_error_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_info_, ("+oid_rt_get_phy_rx_packet_crc32_error_hdl\n"));
++
++	if (poid_par_priv->type_of_oid != QUERY_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++
++	if (poid_par_priv->information_buf_len != sizeof(ULONG))
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	*(ULONG*)poid_par_priv->information_buf = GetPhyRxPktCRC32Error(Adapter);
++	_irqlevel_changed_(&oldirql, RAISE);
++
++	*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++
++	RT_TRACE(_module_mp_, _drv_info_, ("-oid_rt_get_phy_rx_packet_crc32_error_hdl: recv_err=%d\n", *(ULONG*)poid_par_priv->information_buf));
++
++_func_exit_;
++
++	return status;
++}
++//****************  oid_rtl_seg_81_80_20   section end ****************
++NDIS_STATUS oid_rt_pro_set_continuous_tx_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	u32		bStartTest;
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro_set_continuous_tx_hdl\n"));
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	bStartTest = *((u32*)poid_par_priv->information_buf);
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	SetContinuousTx(Adapter,(u8)bStartTest);
++	if (bStartTest) {
++		struct mp_priv *pmp_priv = &Adapter->mppriv;
++		if (pmp_priv->tx.stop == 0) {
++			pmp_priv->tx.stop = 1;
++			DBG_871X("%s: pkt tx is running...\n", __func__);
++			rtw_msleep_os(5);
++		}
++		pmp_priv->tx.stop = 0;
++		pmp_priv->tx.count = 1;
++		SetPacketTx(Adapter);
++	}
++	_irqlevel_changed_(&oldirql, RAISE);
++
++_func_exit_;
++
++	return status;
++}
++
++NDIS_STATUS oid_rt_pro_set_single_carrier_tx_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	u32		bStartTest;
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_alert_, ("+oid_rt_pro_set_single_carrier_tx_hdl\n"));
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	bStartTest = *((u32*)poid_par_priv->information_buf);
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	SetSingleCarrierTx(Adapter, (u8)bStartTest);
++	if (bStartTest) {
++		struct mp_priv *pmp_priv = &Adapter->mppriv;
++		if (pmp_priv->tx.stop == 0) {
++			pmp_priv->tx.stop = 1;
++			DBG_871X("%s: pkt tx is running...\n", __func__);
++			rtw_msleep_os(5);
++		}
++		pmp_priv->tx.stop = 0;
++		pmp_priv->tx.count = 1;
++		SetPacketTx(Adapter);
++	}
++	_irqlevel_changed_(&oldirql, RAISE);
++
++_func_exit_;
++
++	return status;
++}
++
++NDIS_STATUS oid_rt_pro_set_carrier_suppression_tx_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	u32		bStartTest;
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro_set_carrier_suppression_tx_hdl\n"));
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	bStartTest = *((u32*)poid_par_priv->information_buf);
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	SetCarrierSuppressionTx(Adapter, (u8)bStartTest);
++	if (bStartTest) {
++		struct mp_priv *pmp_priv = &Adapter->mppriv;
++		if (pmp_priv->tx.stop == 0) {
++			pmp_priv->tx.stop = 1;
++			DBG_871X("%s: pkt tx is running...\n", __func__);
++			rtw_msleep_os(5);
++		}
++		pmp_priv->tx.stop = 0;
++		pmp_priv->tx.count = 1;
++		SetPacketTx(Adapter);
++	}
++	_irqlevel_changed_(&oldirql, RAISE);
++
++_func_exit_;
++
++	return status;
++}
++
++NDIS_STATUS oid_rt_pro_set_single_tone_tx_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	u32 		bStartTest;
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_alert_, ("+oid_rt_pro_set_single_tone_tx_hdl\n"));
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	bStartTest = *((u32*)poid_par_priv->information_buf);
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	SetSingleToneTx(Adapter,(u8)bStartTest);
++	_irqlevel_changed_(&oldirql, RAISE);
++
++_func_exit_;
++
++	return status;
++}
++
++NDIS_STATUS oid_rt_pro_set_modulation_hdl(struct oid_par_priv* poid_par_priv)
++{
++	return 0;
++}
++
++NDIS_STATUS oid_rt_pro_trigger_gpio_hdl(struct oid_par_priv *poid_par_priv)
++{
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++_func_enter_;
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	rtw_hal_set_hwreg(Adapter, HW_VAR_TRIGGER_GPIO_0, 0);
++	_irqlevel_changed_(&oldirql, RAISE);
++
++_func_exit_;
++
++	return status;
++}
++//****************  oid_rtl_seg_81_80_00   section end ****************
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro8711_join_bss_hdl(struct oid_par_priv *poid_par_priv)
++{
++#if 0
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++
++	PNDIS_802_11_SSID pssid;
++
++_func_enter_;
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	*poid_par_priv->bytes_needed = (u32)sizeof(NDIS_802_11_SSID);
++	*poid_par_priv->bytes_rw = 0;
++	if (poid_par_priv->information_buf_len < *poid_par_priv->bytes_needed)
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	pssid = (PNDIS_802_11_SSID)poid_par_priv->information_buf;
++
++	_irqlevel_changed_(&oldirql, LOWER);
++
++	if (mp_start_joinbss(Adapter, pssid) == _FAIL)
++		status = NDIS_STATUS_NOT_ACCEPTED;
++
++	_irqlevel_changed_(&oldirql, RAISE);
++
++	*poid_par_priv->bytes_rw = sizeof(NDIS_802_11_SSID);
++
++_func_exit_;
++
++	return status;
++#else
++	return 0;
++#endif
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_read_register_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	pRW_Reg 	RegRWStruct;
++	u32		offset, width;
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_info_,
++		 ("+oid_rt_pro_read_register_hdl\n"));
++
++	if (poid_par_priv->type_of_oid != QUERY_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	RegRWStruct = (pRW_Reg)poid_par_priv->information_buf;
++	offset = RegRWStruct->offset;
++	width = RegRWStruct->width;
++
++	if (offset > 0xFFF)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	_irqlevel_changed_(&oldirql, LOWER);
++
++	switch (width) {
++		case 1:
++			RegRWStruct->value = rtw_read8(Adapter, offset);
++			break;
++		case 2:
++			RegRWStruct->value = rtw_read16(Adapter, offset);
++			break;
++		default:
++			width = 4;
++			RegRWStruct->value = rtw_read32(Adapter, offset);
++			break;
++	}
++	RT_TRACE(_module_mp_, _drv_notice_,
++		 ("oid_rt_pro_read_register_hdl: offset:0x%04X value:0x%X\n",
++		  offset, RegRWStruct->value));
++
++	_irqlevel_changed_(&oldirql, RAISE);
++
++	*poid_par_priv->bytes_rw = width;
++
++_func_exit_;
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_write_register_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	pRW_Reg 	RegRWStruct;
++	u32		offset, width, value;
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_info_,
++		 ("+oid_rt_pro_write_register_hdl\n"));
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	RegRWStruct = (pRW_Reg)poid_par_priv->information_buf;
++	offset = RegRWStruct->offset;
++	width = RegRWStruct->width;
++	value = RegRWStruct->value;
++
++	if (offset > 0xFFF)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	_irqlevel_changed_(&oldirql, LOWER);
++
++	switch (RegRWStruct->width)
++	{
++		case 1:
++			if (value > 0xFF) {
++				status = NDIS_STATUS_NOT_ACCEPTED;
++				break;
++			}
++			rtw_write8(padapter, offset, (u8)value);
++			break;
++		case 2:
++			if (value > 0xFFFF) {
++				status = NDIS_STATUS_NOT_ACCEPTED;
++				break;
++			}
++			rtw_write16(padapter, offset, (u16)value);
++			break;
++		case 4:
++			rtw_write32(padapter, offset, value);
++			break;
++		default:
++			status = NDIS_STATUS_NOT_ACCEPTED;
++			break;
++	}
++
++	_irqlevel_changed_(&oldirql, RAISE);
++
++	RT_TRACE(_module_mp_, _drv_info_,
++		 ("-oid_rt_pro_write_register_hdl: offset=0x%08X width=%d value=0x%X\n",
++		  offset, width, value));
++
++_func_exit_;
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_burst_read_register_hdl(struct oid_par_priv *poid_par_priv)
++{
++#if 0
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	pBurst_RW_Reg	pBstRwReg;
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro_burst_read_register_hdl\n"));
++
++	if (poid_par_priv->type_of_oid != QUERY_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	pBstRwReg = (pBurst_RW_Reg)poid_par_priv->information_buf;
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	rtw_read_mem(padapter, pBstRwReg->offset, (u32)pBstRwReg->len, pBstRwReg->Data);
++	_irqlevel_changed_(&oldirql, RAISE);
++
++	*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++
++	RT_TRACE(_module_mp_, _drv_info_, ("-oid_rt_pro_burst_read_register_hdl\n"));
++
++_func_exit_;
++
++	return status;
++#else
++	return 0;
++#endif
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_burst_write_register_hdl(struct oid_par_priv *poid_par_priv)
++{
++#if 0
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	pBurst_RW_Reg	pBstRwReg;
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro_burst_write_register_hdl\n"));
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	pBstRwReg = (pBurst_RW_Reg)poid_par_priv->information_buf;
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	rtw_write_mem(padapter, pBstRwReg->offset, (u32)pBstRwReg->len, pBstRwReg->Data);
++	_irqlevel_changed_(&oldirql, RAISE);
++
++	RT_TRACE(_module_mp_, _drv_info_, ("-oid_rt_pro_burst_write_register_hdl\n"));
++
++_func_exit_;
++
++	return status;
++#else
++	return 0;
++#endif
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_write_txcmd_hdl(struct oid_par_priv *poid_par_priv)
++{
++#if 0
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++
++	PADAPTER	Adapter = (PADAPTER)( poid_par_priv->adapter_context);
++
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++
++	TX_CMD_Desc	*TxCmd_Info;
++
++_func_enter_;
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	RT_TRACE(_module_mp_, _drv_info_, ("+Set OID_RT_PRO_WRITE_TXCMD\n"));
++
++	TxCmd_Info=(TX_CMD_Desc*)poid_par_priv->information_buf;
++
++	RT_TRACE(_module_mp_, _drv_info_, ("WRITE_TXCMD:Addr=%.8X\n", TxCmd_Info->offset));
++  	RT_TRACE(_module_mp_, _drv_info_, ("WRITE_TXCMD:1.)%.8X\n", (ULONG)TxCmd_Info->TxCMD.value[0]));
++	RT_TRACE(_module_mp_, _drv_info_, ("WRITE_TXCMD:2.)%.8X\n", (ULONG)TxCmd_Info->TxCMD.value[1]));
++	RT_TRACE(_module_mp_, _drv_info_, (("WRITE_TXCMD:3.)%.8X\n", (ULONG)TxCmd_Info->TxCMD.value[2]));
++	RT_TRACE(_module_mp_, _drv_info_, ("WRITE_TXCMD:4.)%.8X\n", (ULONG)TxCmd_Info->TxCMD.value[3]));
++
++	_irqlevel_changed_(&oldirql, LOWER);
++
++	rtw_write32(Adapter, TxCmd_Info->offset + 0, (unsigned int)TxCmd_Info->TxCMD.value[0]);
++	rtw_write32(Adapter, TxCmd_Info->offset + 4, (unsigned int)TxCmd_Info->TxCMD.value[1]);
++
++	_irqlevel_changed_(&oldirql, RAISE);
++
++	RT_TRACE(_module_mp_, _drv_notice_,
++		 ("-Set OID_RT_PRO_WRITE_TXCMD: status=0x%08X\n", status));
++
++_func_exit_;
++
++	return status;
++#else
++	return 0;
++#endif
++}
++
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_read16_eeprom_hdl(struct oid_par_priv *poid_par_priv)
++{
++#if 0
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	pEEPROM_RWParam pEEPROM;
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_info_, ("+Query OID_RT_PRO_READ16_EEPROM\n"));
++
++	if (poid_par_priv->type_of_oid != QUERY_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	pEEPROM = (pEEPROM_RWParam)poid_par_priv->information_buf;
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	pEEPROM->value = eeprom_read16(padapter, (u16)(pEEPROM->offset >> 1));
++	_irqlevel_changed_(&oldirql, RAISE);
++
++	*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++
++	RT_TRACE(_module_mp_,  _drv_notice_,
++		 ("-Query OID_RT_PRO_READ16_EEPROM: offset=0x%x value=0x%x\n",
++		  pEEPROM->offset, pEEPROM->value));
++
++_func_exit_;
++
++	return status;
++#else
++	return 0;
++#endif
++}
++
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_write16_eeprom_hdl (struct oid_par_priv *poid_par_priv)
++{
++#if 0
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	pEEPROM_RWParam pEEPROM;
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("+Set OID_RT_PRO_WRITE16_EEPROM\n"));
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	pEEPROM = (pEEPROM_RWParam)poid_par_priv->information_buf;
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	eeprom_write16(padapter, (u16)(pEEPROM->offset >> 1), pEEPROM->value);
++	_irqlevel_changed_(&oldirql, RAISE);
++
++	*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++
++_func_exit_;
++
++	return status;
++#else
++	return 0;
++#endif
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro8711_wi_poll_hdl(struct oid_par_priv *poid_par_priv)
++{
++#if 0
++	PADAPTER	Adapter = (PADAPTER)( poid_par_priv->adapter_context);
++
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++
++	struct mp_wiparam *pwi_param;
++
++_func_enter_;
++
++	if (poid_par_priv->type_of_oid != QUERY_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	if (poid_par_priv->information_buf_len < sizeof(struct mp_wiparam))
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	if (Adapter->mppriv.workparam.bcompleted == _FALSE)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	pwi_param = (struct mp_wiparam *)poid_par_priv->information_buf;
++
++	_rtw_memcpy(pwi_param, &Adapter->mppriv.workparam, sizeof(struct mp_wiparam));
++	Adapter->mppriv.act_in_progress = _FALSE;
++//	RT_TRACE(_module_mp_, _drv_info_, ("rf:%x\n", pwiparam->IoValue));
++	*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++
++_func_exit_;
++
++	return status;
++#else
++	return 0;
++#endif
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro8711_pkt_loss_hdl(struct oid_par_priv *poid_par_priv)
++{
++#if 0
++	PADAPTER	Adapter = (PADAPTER)( poid_par_priv->adapter_context);
++
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro8711_pkt_loss_hdl\n"));
++
++	if (poid_par_priv->type_of_oid != QUERY_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	if (poid_par_priv->information_buf_len < sizeof(uint)*2) {
++		RT_TRACE(_module_mp_, _drv_err_, ("-oid_rt_pro8711_pkt_loss_hdl: buf_len=%d\n", (int)poid_par_priv->information_buf_len));
++		return NDIS_STATUS_INVALID_LENGTH;
++	}
++
++	if (*(uint*)poid_par_priv->information_buf == 1)//init==1
++		Adapter->mppriv.rx_pktloss = 0;
++
++	*((uint*)poid_par_priv->information_buf+1) = Adapter->mppriv.rx_pktloss;
++	*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++
++_func_exit_;
++
++	return status;
++#else
++	return 0;
++#endif
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_rd_attrib_mem_hdl(struct oid_par_priv *poid_par_priv)
++{
++#if 0
++	PADAPTER	Adapter = (PADAPTER)( poid_par_priv->adapter_context);
++	struct io_queue *pio_queue = (struct io_queue *)Adapter->pio_queue;
++	struct intf_hdl	*pintfhdl = &pio_queue->intf;
++
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++
++#ifdef CONFIG_SDIO_HCI
++	void (*_attrib_read)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem);
++#endif
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("+Query OID_RT_RD_ATTRIB_MEM\n"));
++
++	if (poid_par_priv->type_of_oid != QUERY_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++#ifdef CONFIG_SDIO_HCI
++	_irqlevel_changed_(&oldirql, LOWER);
++{
++	u32 *plmem = (u32*)poid_par_priv->information_buf+2;
++	_attrib_read = pintfhdl->io_ops._attrib_read;
++	_attrib_read(pintfhdl, *((u32*)poid_par_priv->information_buf),
++				*((u32*)poid_par_priv->information_buf+1), (u8*)plmem);
++	*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++}
++	_irqlevel_changed_(&oldirql, RAISE);
++#endif
++
++_func_exit_;
++
++	return status;
++#else
++	return 0;
++#endif
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_wr_attrib_mem_hdl (struct oid_par_priv *poid_par_priv)
++{
++#if 0
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++	struct io_queue *pio_queue = (struct io_queue *)Adapter->pio_queue;
++	struct intf_hdl	*pintfhdl = &pio_queue->intf;
++
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++
++#ifdef CONFIG_SDIO_HCI
++	void (*_attrib_write)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem);
++#endif
++
++_func_enter_;
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++#ifdef CONFIG_SDIO_HCI
++	_irqlevel_changed_(&oldirql, LOWER);
++{
++	u32 *plmem = (u32*)poid_par_priv->information_buf + 2;
++	_attrib_write = pintfhdl->io_ops._attrib_write;
++	_attrib_write(pintfhdl, *(u32*)poid_par_priv->information_buf,
++				*((u32*)poid_par_priv->information_buf+1), (u8*)plmem);
++}
++	_irqlevel_changed_(&oldirql, RAISE);
++#endif
++
++_func_exit_;
++
++	return status;
++#else
++	return 0;
++#endif
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS  oid_rt_pro_set_rf_intfs_hdl(struct oid_par_priv *poid_par_priv)
++{
++#if 0
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("+OID_RT_PRO_SET_RF_INTFS\n"));
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	_irqlevel_changed_(&oldirql, LOWER);
++
++	if (rtw_setrfintfs_cmd(Adapter, *(unsigned char*)poid_par_priv->information_buf) == _FAIL)
++		status = NDIS_STATUS_NOT_ACCEPTED;
++
++	_irqlevel_changed_(&oldirql, RAISE);
++
++_func_exit_;
++
++	return status;
++#else
++	return 0;
++#endif
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_poll_rx_status_hdl(struct oid_par_priv *poid_par_priv)
++{
++#if 0
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++
++_func_enter_;
++
++	if (poid_par_priv->type_of_oid != QUERY_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	_rtw_memcpy(poid_par_priv->information_buf, (unsigned char*)&Adapter->mppriv.rxstat, sizeof(struct recv_stat));
++	*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++
++_func_exit_;
++
++	return status;
++#else
++	return 0;
++#endif
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_cfg_debug_message_hdl(struct oid_par_priv *poid_par_priv)
++{
++#if 0
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++
++	PCFG_DBG_MSG_STRUCT pdbg_msg;
++
++_func_enter_;
++
++//	RT_TRACE(0xffffffffff,_drv_alert_,("===> oid_rt_pro_cfg_debug_message_hdl.\n"));
++
++#if 0//#ifdef CONFIG_DEBUG_RTL871X
++
++	pdbg_msg = (PCFG_DBG_MSG_STRUCT)(poid_par_priv->information_buf);
++
++	if (poid_par_priv->type_of_oid == SET_OID) {
++		RT_TRACE(0xffffffffff, _drv_alert_,
++			 ("===>Set level :0x%08x, H32:0x%08x L32:0x%08x\n",
++			  pdbg_msg->DebugLevel, pdbg_msg->DebugComponent_H32, pdbg_msg->DebugComponent_L32));
++
++		GlobalDebugLevel = pdbg_msg->DebugLevel;
++		GlobalDebugComponents = (pdbg_msg->DebugComponent_H32 << 32) | pdbg_msg->DebugComponent_L32;
++		RT_TRACE(0xffffffffff, _drv_alert_,
++			 ("===> Set level :0x%08x, component:0x%016x\n",
++			  GlobalDebugLevel, (u32)GlobalDebugComponents));
++	} else {
++		pdbg_msg->DebugLevel = GlobalDebugLevel;
++		pdbg_msg->DebugComponent_H32 = (u32)(GlobalDebugComponents >> 32);
++		pdbg_msg->DebugComponent_L32 = (u32)GlobalDebugComponents;
++		*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++
++		RT_TRACE(0xffffffffff, _drv_alert_,
++			 ("===>Query level:0x%08x H32:0x%08x L32:0x%08x\n",
++			  (u32)pdbg_msg->DebugLevel, (u32)pdbg_msg->DebugComponent_H32, (u32)pdbg_msg->DebugComponent_L32));
++	}
++
++#endif
++
++_func_exit_;
++
++	return status;
++#else
++	return 0;
++#endif
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_set_data_rate_ex_hdl(struct oid_par_priv *poid_par_priv)
++{
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("+OID_RT_PRO_SET_DATA_RATE_EX\n"));
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	_irqlevel_changed_(&oldirql, LOWER);
++
++	if (rtw_setdatarate_cmd(Adapter, poid_par_priv->information_buf) !=_SUCCESS)
++		status = NDIS_STATUS_NOT_ACCEPTED;
++
++	_irqlevel_changed_(&oldirql, RAISE);
++
++_func_exit_;
++
++	return status;
++}
++//-----------------------------------------------------------------------------
++NDIS_STATUS oid_rt_get_thermal_meter_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	u8 thermal = 0;
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_get_thermal_meter_hdl\n"));
++
++	if (poid_par_priv->type_of_oid != QUERY_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	if (poid_par_priv->information_buf_len < sizeof(u32))
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	GetThermalMeter(Adapter, &thermal);
++	_irqlevel_changed_(&oldirql, RAISE);
++
++	*(u32*)poid_par_priv->information_buf = (u32)thermal;
++	*poid_par_priv->bytes_rw = sizeof(u32);
++
++_func_exit_;
++
++	return status;
++}
++//-----------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_read_tssi_hdl(struct oid_par_priv *poid_par_priv)
++{
++#if 0
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro_read_tssi_hdl\n"));
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	if (Adapter->mppriv.act_in_progress == _TRUE)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	if (poid_par_priv->information_buf_len < sizeof(u8))
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	//init workparam
++	Adapter->mppriv.act_in_progress = _TRUE;
++	Adapter->mppriv.workparam.bcompleted = _FALSE;
++	Adapter->mppriv.workparam.act_type = MPT_READ_TSSI;
++	Adapter->mppriv.workparam.io_offset = 0;
++	Adapter->mppriv.workparam.io_value = 0xFFFFFFFF;
++
++	_irqlevel_changed_(&oldirql, LOWER);
++
++	if (!rtw_gettssi_cmd(Adapter,0, (u8*)&Adapter->mppriv.workparam.io_value))
++		status = NDIS_STATUS_NOT_ACCEPTED;
++
++	_irqlevel_changed_(&oldirql, RAISE);
++
++_func_exit_;
++
++	return status;
++#else
++	return 0;
++#endif
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_set_power_tracking_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++
++_func_enter_;
++
++//	if (poid_par_priv->type_of_oid != SET_OID)
++//		return NDIS_STATUS_NOT_ACCEPTED;
++
++	if (poid_par_priv->information_buf_len < sizeof(u8))
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	if (poid_par_priv->type_of_oid == SET_OID) {
++		u8 enable;
++
++		enable = *(u8*)poid_par_priv->information_buf;
++		RT_TRACE(_module_mp_, _drv_notice_,
++			 ("+oid_rt_pro_set_power_tracking_hdl: enable=%d\n", enable));
++
++		SetPowerTracking(Adapter, enable);
++	} else {
++		GetPowerTracking(Adapter, (u8*)poid_par_priv->information_buf);
++	}
++	_irqlevel_changed_(&oldirql, RAISE);
++
++_func_exit_;
++
++	return status;
++}
++//-----------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_set_basic_rate_hdl(struct oid_par_priv *poid_par_priv)
++{
++#if 0
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	u32 ratevalue;
++	u8 datarates[NumRates];
++	int i;
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_info_, ("+OID_RT_PRO_SET_BASIC_RATE\n"));
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++#if 0
++	ratevalue = *((u32*)poid_par_priv->information_buf);
++
++	for (i = 0; i < NumRates; i++) {
++		if (ratevalue == mpdatarate[i])
++			datarates[i] = mpdatarate[i];
++		else
++			datarates[i] = 0xff;
++		RT_TRACE(_module_rtl871x_ioctl_c_, _drv_info_, ("basicrate_inx=%d\n", datarates[i]));
++	}
++
++	_irqlevel_changed_(&oldirql, LOWER);
++
++	if (rtw_setbasicrate_cmd(padapter, datarates) != _SUCCESS)
++		status = NDIS_STATUS_NOT_ACCEPTED;
++
++	_irqlevel_changed_(&oldirql, RAISE);
++#endif
++	RT_TRACE(_module_mp_, _drv_notice_,
++		 ("-OID_RT_PRO_SET_BASIC_RATE: status=0x%08X\n", status));
++
++_func_exit_;
++
++	return status;
++#else
++	return 0;
++#endif
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_qry_pwrstate_hdl(struct oid_par_priv *poid_par_priv)
++{
++#if 0
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++
++_func_enter_;
++
++	if (poid_par_priv->type_of_oid != QUERY_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	if (poid_par_priv->information_buf_len < 8)
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	*poid_par_priv->bytes_rw = 8;
++	_rtw_memcpy(poid_par_priv->information_buf, &(Adapter->pwrctrlpriv.pwr_mode), 8);
++	*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++
++	RT_TRACE(_module_mp_, _drv_notice_,
++		 ("-oid_rt_pro_qry_pwrstate_hdl: pwr_mode=%d smart_ps=%d\n",
++		  Adapter->pwrctrlpriv.pwr_mode, Adapter->pwrctrlpriv.smart_ps));
++
++_func_exit_;
++
++	return status;
++#else
++	return 0;
++#endif
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_set_pwrstate_hdl(struct oid_par_priv *poid_par_priv)
++{
++#if 0
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++
++	uint pwr_mode, smart_ps;
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("+Set OID_RT_PRO_SET_PWRSTATE\n"));
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	*poid_par_priv->bytes_rw = 0;
++	*poid_par_priv->bytes_needed = 8;
++
++	if (poid_par_priv->information_buf_len < 8)
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	pwr_mode = *(uint *)(poid_par_priv->information_buf);
++	smart_ps = *(uint *)((int)poid_par_priv->information_buf + 4);
++
++	*poid_par_priv->bytes_rw = 8;
++
++_func_exit_;
++
++	return status;
++#else
++	return 0;
++#endif
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_h2c_set_rate_table_hdl(struct oid_par_priv *poid_par_priv)
++{
++#if 0
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++
++	struct setratable_parm *prate_table;
++	u8		res;
++
++_func_enter_;
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	*poid_par_priv->bytes_needed  = sizeof(struct setratable_parm);
++	if (poid_par_priv->information_buf_len < sizeof(struct setratable_parm))
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	prate_table = (struct setratable_parm*)poid_par_priv->information_buf;
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	res = rtw_setrttbl_cmd(Adapter, prate_table);
++	_irqlevel_changed_(&oldirql, RAISE);
++
++	if (res == _FAIL)
++		status = NDIS_STATUS_FAILURE;
++
++_func_exit_;
++
++	return status;
++#else
++	return 0;
++#endif
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_h2c_get_rate_table_hdl(struct oid_par_priv *poid_par_priv)
++{
++#if 0
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++
++_func_enter_;
++
++	if (poid_par_priv->type_of_oid != QUERY_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	#if 0
++			struct mp_wi_cntx *pmp_wi_cntx=&(Adapter->mppriv.wi_cntx);
++			u8 res=_SUCCESS;
++			DEBUG_INFO(("===> Set OID_RT_PRO_H2C_GET_RATE_TABLE.\n"));
++
++			if(pmp_wi_cntx->bmp_wi_progress ==_TRUE){
++				DEBUG_ERR(("\n mp workitem is progressing, not allow to set another workitem right now!!!\n"));
++				Status = NDIS_STATUS_NOT_ACCEPTED;
++				break;
++			}
++			else{
++				pmp_wi_cntx->bmp_wi_progress=_TRUE;
++				pmp_wi_cntx->param.bcompleted=_FALSE;
++				pmp_wi_cntx->param.act_type=MPT_GET_RATE_TABLE;
++				pmp_wi_cntx->param.io_offset=0x0;
++				pmp_wi_cntx->param.bytes_cnt=sizeof(struct getratable_rsp);
++				pmp_wi_cntx->param.io_value=0xffffffff;
++
++				res=rtw_getrttbl_cmd(Adapter,(struct getratable_rsp *)pmp_wi_cntx->param.data);
++				*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++				if(res != _SUCCESS)
++				{
++					Status = NDIS_STATUS_NOT_ACCEPTED;
++				}
++			}
++			DEBUG_INFO(("\n <=== Set OID_RT_PRO_H2C_GET_RATE_TABLE.\n"));
++	#endif
++
++_func_exit_;
++
++	return status;
++#else
++	return 0;
++#endif
++}
++
++//****************  oid_rtl_seg_87_12_00   section start ****************
++NDIS_STATUS oid_rt_pro_encryption_ctrl_hdl(struct oid_par_priv *poid_par_priv)
++{
++#if 0
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++	struct security_priv *psecuritypriv = &Adapter->securitypriv;
++
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++
++	ENCRY_CTRL_STATE encry_mode;
++
++
++	*poid_par_priv->bytes_needed = sizeof(u8);
++	if (poid_par_priv->information_buf_len < *poid_par_priv->bytes_needed)
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	if (poid_par_priv->type_of_oid == SET_OID)
++	{
++		encry_mode = *((u8*)poid_par_priv->information_buf);
++		switch (encry_mode)
++		{
++			case HW_CONTROL:
++				#if 0
++				Adapter->registrypriv.software_decrypt=_FALSE;
++				Adapter->registrypriv.software_encrypt=_FALSE;
++				#else
++				psecuritypriv->sw_decrypt = _FALSE;
++				psecuritypriv->sw_encrypt = _FALSE;
++				#endif
++				break;
++			case SW_CONTROL:
++				#if 0
++				Adapter->registrypriv.software_decrypt=_TRUE;
++				Adapter->registrypriv.software_encrypt=_TRUE;
++				#else
++				psecuritypriv->sw_decrypt = _TRUE;
++				psecuritypriv->sw_encrypt = _TRUE;
++				#endif
++				break;
++			case HW_ENCRY_SW_DECRY:
++				#if 0
++				Adapter->registrypriv.software_decrypt=_TRUE;
++				Adapter->registrypriv.software_encrypt=_FALSE;
++				#else
++				psecuritypriv->sw_decrypt = _TRUE;
++				psecuritypriv->sw_encrypt = _FALSE;
++				#endif
++				break;
++			case SW_ENCRY_HW_DECRY:
++				#if 0
++				Adapter->registrypriv.software_decrypt=_FALSE;
++				Adapter->registrypriv.software_encrypt=_TRUE;
++				#else
++				psecuritypriv->sw_decrypt = _FALSE;
++				psecuritypriv->sw_encrypt = _TRUE;
++				#endif
++				break;
++		}
++
++		RT_TRACE(_module_rtl871x_ioctl_c_, _drv_notice_,
++			 ("-oid_rt_pro_encryption_ctrl_hdl: SET encry_mode=0x%x sw_encrypt=0x%x sw_decrypt=0x%x\n",
++			  encry_mode, psecuritypriv->sw_encrypt, psecuritypriv->sw_decrypt));
++	}
++	else {
++		#if 0
++		if (Adapter->registrypriv.software_encrypt == _FALSE) {
++			if (Adapter->registrypriv.software_decrypt == _FALSE)
++				encry_mode = HW_CONTROL;
++			else
++				encry_mode = HW_ENCRY_SW_DECRY;
++		}
++		else {
++			if (Adapter->registrypriv.software_decrypt == _FALSE)
++				encry_mode = SW_ENCRY_HW_DECRY;
++			else
++				encry_mode = SW_CONTROL;
++		}
++		#else
++
++		if ((psecuritypriv->sw_encrypt == _FALSE) && (psecuritypriv->sw_decrypt == _FALSE))
++			encry_mode = HW_CONTROL;
++		else if ((psecuritypriv->sw_encrypt == _FALSE) && (psecuritypriv->sw_decrypt == _TRUE))
++			encry_mode = HW_ENCRY_SW_DECRY;
++		else if ((psecuritypriv->sw_encrypt == _TRUE) && (psecuritypriv->sw_decrypt == _FALSE))
++			encry_mode = SW_ENCRY_HW_DECRY;
++		else if ((psecuritypriv->sw_encrypt == _TRUE) && (psecuritypriv->sw_decrypt == _TRUE))
++			encry_mode = SW_CONTROL;
++
++		#endif
++
++		*(u8*)poid_par_priv->information_buf =  encry_mode;
++		*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++
++		RT_TRACE(_module_mp_, _drv_notice_,
++			 ("-oid_rt_pro_encryption_ctrl_hdl: QUERY encry_mode=0x%x\n",
++			  encry_mode));
++	}
++
++	return status;
++#else
++	return 0;
++#endif
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_add_sta_info_hdl(struct oid_par_priv *poid_par_priv)
++{
++#if 0
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++
++	struct sta_info *psta = NULL;
++	UCHAR 		*macaddr;
++
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	*poid_par_priv->bytes_needed = ETH_ALEN;
++	if (poid_par_priv->information_buf_len < *poid_par_priv->bytes_needed)
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	macaddr = (UCHAR *) poid_par_priv->information_buf ;
++
++	RT_TRACE(_module_rtl871x_ioctl_c_,_drv_notice_,
++		 ("OID_RT_PRO_ADD_STA_INFO: addr="MAC_FMT"\n", MAC_ARG(macaddr) ));
++
++	_irqlevel_changed_(&oldirql, LOWER);
++
++	psta = rtw_get_stainfo(&Adapter->stapriv, macaddr);
++
++	if (psta == NULL) { // the sta have been in sta_info_queue => do nothing
++		psta = rtw_alloc_stainfo(&Adapter->stapriv, macaddr);
++
++		if (psta == NULL) {
++			RT_TRACE(_module_rtl871x_ioctl_c_,_drv_err_,("Can't alloc sta_info when OID_RT_PRO_ADD_STA_INFO\n"));
++			status = NDIS_STATUS_FAILURE;
++		}
++	} else { //(between drv has received this event before and  fw have not yet to set key to CAM_ENTRY)
++		RT_TRACE(_module_rtl871x_ioctl_c_, _drv_err_,
++			("Error: OID_RT_PRO_ADD_STA_INFO: sta has been in sta_hash_queue \n"));
++	}
++
++	_irqlevel_changed_(&oldirql, RAISE);
++
++	return status;
++#else
++	return 0;
++#endif
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_dele_sta_info_hdl(struct oid_par_priv *poid_par_priv)
++{
++#if 0
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++
++	struct sta_info *psta = NULL;
++	UCHAR		*macaddr;
++
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	*poid_par_priv->bytes_needed = ETH_ALEN;
++	if (poid_par_priv->information_buf_len < *poid_par_priv->bytes_needed)
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	macaddr = (UCHAR *) poid_par_priv->information_buf ;
++	RT_TRACE(_module_rtl871x_ioctl_c_,_drv_notice_,
++		 ("+OID_RT_PRO_ADD_STA_INFO: addr="MAC_FMT"\n", MAC_ARG(macaddr) ));
++
++	psta = rtw_get_stainfo(&Adapter->stapriv, macaddr);
++	if (psta != NULL) {
++		_enter_critical(&(Adapter->stapriv.sta_hash_lock), &irqL);
++		rtw_free_stainfo(Adapter, psta);
++		_exit_critical(&(Adapter->stapriv.sta_hash_lock), &irqL);
++	}
++
++	return status;
++#else
++	return 0;
++#endif
++}
++//------------------------------------------------------------------------------
++#if 0
++#include <sdio_osintf.h>
++static u32 mp_query_drv_var(_adapter *padapter, u8 offset, u32 var)
++{
++#ifdef CONFIG_SDIO_HCI
++
++	if (offset == 1) {
++		u16 tmp_blk_num;
++		tmp_blk_num = rtw_read16(padapter, SDIO_RX0_RDYBLK_NUM);
++		RT_TRACE(_module_mp_, _drv_err_, ("Query Information, mp_query_drv_var  SDIO_RX0_RDYBLK_NUM=0x%x   adapter_to_dvobj(padapter)->rxblknum=0x%x\n", tmp_blk_num, adapter_to_dvobj(padapter)->rxblknum));
++		if (adapter_to_dvobj(padapter)->rxblknum != tmp_blk_num) {
++			RT_TRACE(_module_mp_,_drv_err_, ("Query Information, mp_query_drv_var  call recv rx\n"));
++		//	sd_recv_rxfifo(padapter);
++		}
++	}
++
++#if 0
++	if(offset <=100){  //For setting data rate and query data rate
++		if(offset==100){ //For query data rate
++			RT_TRACE(_module_mp_, _drv_emerg_, ("\n mp_query_drv_var: offset(%d): query rate=0x%.2x \n",offset,padapter->registrypriv.tx_rate));
++			var=padapter->registrypriv.tx_rate;
++
++		}
++		else if(offset<0x1d){  //For setting data rate
++			padapter->registrypriv.tx_rate=offset;
++			var=padapter->registrypriv.tx_rate;
++			padapter->registrypriv.use_rate=_TRUE;
++			RT_TRACE(_module_mp_, _drv_emerg_, ("\n mp_query_drv_var: offset(%d): set rate=0x%.2x \n",offset,padapter->registrypriv.tx_rate));
++		}
++		else{ //not use the data rate
++			padapter->registrypriv.use_rate=_FALSE;
++			RT_TRACE(_module_mp_, _drv_emerg_, ("\n mp_query_drv_var: offset(%d) out of rate range\n",offset));
++		}
++	}
++	else if (offset<=110){  //for setting debug level
++		RT_TRACE(_module_mp_, _drv_emerg_, (" mp_query_drv_var: offset(%d) for set debug level\n",offset));
++		if(offset==110){ //For query data rate
++			RT_TRACE(_module_mp_, _drv_emerg_, (" mp_query_drv_var: offset(%d): query dbg level=0x%.2x \n",offset,padapter->registrypriv.dbg_level));
++			padapter->registrypriv.dbg_level=GlobalDebugLevel;
++			var=padapter->registrypriv.dbg_level;
++		}
++		else if(offset<110 && offset>100){
++			RT_TRACE(_module_mp_, _drv_emerg_, (" mp_query_drv_var: offset(%d): set dbg level=0x%.2x \n",offset,offset-100));
++			padapter->registrypriv.dbg_level=GlobalDebugLevel=offset-100;
++			var=padapter->registrypriv.dbg_level;
++			RT_TRACE(_module_mp_, _drv_emerg_, (" mp_query_drv_var(_drv_emerg_): offset(%d): set dbg level=0x%.2x \n",offset,GlobalDebugLevel));
++			RT_TRACE(_module_mp_, _drv_alert_, (" mp_query_drv_var(_drv_alert_): offset(%d): set dbg level=0x%.2x \n",offset,GlobalDebugLevel));
++			RT_TRACE(_module_mp_, _drv_crit_, (" mp_query_drv_var(_drv_crit_): offset(%d): set dbg level=0x%.2x \n",offset,GlobalDebugLevel));
++			RT_TRACE(_module_mp_, _drv_err_, (" mp_query_drv_var(_drv_err_): offset(%d): set dbg level=0x%.2x \n",offset,GlobalDebugLevel));
++			RT_TRACE(_module_mp_, _drv_warning_, (" mp_query_drv_var(_drv_warning_): offset(%d): set dbg level=0x%.2x \n",offset,GlobalDebugLevel));
++			RT_TRACE(_module_mp_, _drv_notice_, (" mp_query_drv_var(_drv_notice_): offset(%d): set dbg level=0x%.2x \n",offset,GlobalDebugLevel));
++			RT_TRACE(_module_mp_, _drv_info_, (" mp_query_drv_var(_drv_info_): offset(%d): set dbg level=0x%.2x \n",offset,GlobalDebugLevel));
++			RT_TRACE(_module_mp_, _drv_debug_, (" mp_query_drv_var(_drv_debug_): offset(%d): set dbg level=0x%.2x \n",offset,GlobalDebugLevel));
++
++		}
++	}
++	else if(offset >110 &&offset <116){
++		if(115==offset){
++			RT_TRACE(_module_mp_, _drv_emerg_, (" mp_query_drv_var(_drv_emerg_): offset(%d): query TRX access type: [tx_block_mode=%x,rx_block_mode=%x]\n",\
++															offset, adapter_to_dvobj(padapter)->tx_block_mode, adapter_to_dvobj(padapter)->rx_block_mode));
++		}
++		else {
++			switch(offset){
++				case 111:
++					adapter_to_dvobj(padapter)->tx_block_mode=1;
++					adapter_to_dvobj(padapter)->rx_block_mode=1;
++					RT_TRACE(_module_mp_, _drv_emerg_, \
++						(" mp_query_drv_var(_drv_emerg_): offset(%d): SET TRX access type:(TX block/RX block) [tx_block_mode=%x,rx_block_mode=%x]\n",\
++						offset, adapter_to_dvobj(padapter)->tx_block_mode, adapter_to_dvobj(padapter)->rx_block_mode));
++					break;
++				case 112:
++					adapter_to_dvobj(padapter)->tx_block_mode=1;
++					adapter_to_dvobj(padapter)->rx_block_mode=0;
++					RT_TRACE(_module_mp_, _drv_emerg_, \
++						(" mp_query_drv_var(_drv_emerg_): offset(%d): SET TRX access type:(TX block/RX byte) [tx_block_mode=%x,rx_block_mode=%x]\n",\
++						offset, adapter_to_dvobj(padapter)->tx_block_mode, adapter_to_dvobj(padapter)->rx_block_mode));
++					break;
++				case 113:
++					adapter_to_dvobj(padapter)->tx_block_mode=0;
++					adapter_to_dvobj(padapter)->rx_block_mode=1;
++					RT_TRACE(_module_mp_, _drv_emerg_, \
++						(" mp_query_drv_var(_drv_emerg_): offset(%d): SET TRX access type:(TX byte/RX block) [tx_block_mode=%x,rx_block_mode=%x]\n",\
++						offset, adapter_to_dvobj(padapter)->tx_block_mode, adapter_to_dvobj(padapter)->rx_block_mode));
++					break;
++				case 114:
++					adapter_to_dvobj(padapter)->tx_block_mode=0;
++					adapter_to_dvobj(padapter)->rx_block_mode=0;
++					RT_TRACE(_module_mp_, _drv_emerg_, \
++						(" mp_query_drv_var(_drv_emerg_): offset(%d): SET TRX access type:(TX byte/RX byte) [tx_block_mode=%x,rx_block_mode=%x]\n",\
++						offset, adapter_to_dvobj(padapter)->tx_block_mode, adapter_to_dvobj(padapter)->rx_block_mode));
++					break;
++				default :
++					break;
++
++			}
++
++		}
++
++	}
++	else if(offset>=127){
++		u64	prnt_dbg_comp;
++		u8   chg_idx;
++		u64	tmp_dbg_comp;
++		chg_idx=offset-0x80;
++		tmp_dbg_comp=BIT(chg_idx);
++		prnt_dbg_comp=padapter->registrypriv.dbg_component= GlobalDebugComponents;
++		RT_TRACE(_module_mp_, _drv_emerg_, (" 1: mp_query_drv_var: offset(%d;0x%x):for dbg conpoment prnt_dbg_comp=0x%.16x GlobalDebugComponents=0x%.16x padapter->registrypriv.dbg_component=0x%.16x\n",offset,offset,prnt_dbg_comp,GlobalDebugComponents,padapter->registrypriv.dbg_component));
++		if(offset==127){
++	//		prnt_dbg_comp=padapter->registrypriv.dbg_component= GlobalDebugComponents;
++			var=(u32)(padapter->registrypriv.dbg_component);
++			RT_TRACE(0xffffffff, _drv_emerg_, ("2: mp_query_drv_var: offset(%d;0x%x):for query dbg conpoment=0x%x(l) 0x%x(h)  GlobalDebugComponents=0x%x(l) 0x%x(h) \n",offset,offset,padapter->registrypriv.dbg_component,prnt_dbg_comp));
++			prnt_dbg_comp=GlobalDebugComponents;
++			RT_TRACE(0xffffffff, _drv_emerg_, ("2-1: mp_query_drv_var: offset(%d;0x%x):for query dbg conpoment=0x%x(l) 0x%x(h)  GlobalDebugComponents=0x%x(l) 0x%x(h)\n",offset,offset,padapter->registrypriv.dbg_component,prnt_dbg_comp));
++			prnt_dbg_comp=GlobalDebugComponents=padapter->registrypriv.dbg_component;
++			RT_TRACE(0xffffffff, _drv_emerg_, ("2-2: mp_query_drv_var: offset(%d;0x%x):for query dbg conpoment=0x%x(l) 0x%x(h)  GlobalDebugComponents=0x%x(l) 0x%x(h)\n",offset,offset,padapter->registrypriv.dbg_component,prnt_dbg_comp));
++
++		}
++		else{
++			RT_TRACE(0xffffffff, _drv_emerg_, ("3: mp_query_drv_var: offset(%d;0x%x):for query dbg conpoment=0x%x(l) 0x%x(h) GlobalDebugComponents=0x%x(l) 0x%x(h) chg_idx=%d\n",offset,offset,padapter->registrypriv.dbg_component,prnt_dbg_comp,chg_idx));
++			prnt_dbg_comp=GlobalDebugComponents;
++			RT_TRACE(0xffffffff, _drv_emerg_,("3-1: mp_query_drv_var: offset(%d;0x%x):for query dbg conpoment=0x%x(l) 0x%x(h)  GlobalDebugComponents=0x%x(l) 0x%x(h) chg_idx=%d\n",offset,offset,padapter->registrypriv.dbg_component,prnt_dbg_comp,chg_idx));// ("3-1: mp_query_drv_var: offset(%d;0x%x):before set dbg conpoment=0x%x chg_idx=%d or0x%x BIT(chg_idx[%d]=0x%x)\n",offset,offset,prnt_dbg_comp,chg_idx,chg_idx,(chg_idx),tmp_dbg_comp)
++			prnt_dbg_comp=GlobalDebugComponents=padapter->registrypriv.dbg_component;
++			RT_TRACE(0xffffffff, _drv_emerg_, ("3-2: mp_query_drv_var: offset(%d;0x%x):for query dbg conpoment=0x%x(l) 0x%x(h)  GlobalDebugComponents=0x%x(l) 0x%x(h)\n",offset,offset,padapter->registrypriv.dbg_component,prnt_dbg_comp));
++
++			if(GlobalDebugComponents&tmp_dbg_comp){
++				//this bit is already set, now clear it
++				GlobalDebugComponents=GlobalDebugComponents&(~tmp_dbg_comp);
++			}
++			else{
++				//this bit is not set, now set it.
++				GlobalDebugComponents =GlobalDebugComponents|tmp_dbg_comp;
++			}
++			RT_TRACE(0xffffffff, _drv_emerg_, ("4: mp_query_drv_var: offset(%d;0x%x):before set dbg conpoment tmp_dbg_comp=0x%x GlobalDebugComponents=0x%x(l) 0x%x(h)",offset,offset,tmp_dbg_comp,prnt_dbg_comp));
++			prnt_dbg_comp=GlobalDebugComponents;
++			RT_TRACE(0xffffffff, _drv_emerg_, ("4-1: mp_query_drv_var: offset(%d;0x%x):before set dbg conpoment tmp_dbg_comp=0x%x GlobalDebugComponents=0x%x(l) 0x%x(h)",offset,offset,tmp_dbg_comp,prnt_dbg_comp));
++
++			RT_TRACE(_module_rtl871x_xmit_c_, _drv_emerg_, ("0: mp_query_drv_var(_module_rtl871x_xmit_c_:0): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,prnt_dbg_comp));
++			RT_TRACE(_module_xmit_osdep_c_, _drv_emerg_, ("1: mp_query_drv_var(_module_xmit_osdep_c_:1): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents));
++			RT_TRACE(_module_rtl871x_recv_c_, _drv_emerg_, ("2: mp_query_drv_var(_module_rtl871x_recv_c_:2): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents));
++			RT_TRACE(_module_recv_osdep_c_, _drv_emerg_, ("3: mp_query_drv_var(_module_recv_osdep_c_:3): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents));
++			RT_TRACE(_module_rtl871x_mlme_c_, _drv_emerg_, ("4: mp_query_drv_var(_module_rtl871x_mlme_c_:4): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents));
++			RT_TRACE(_module_mlme_osdep_c_, _drv_emerg_, (" 5:mp_query_drv_var(_module_mlme_osdep_c_:5): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents));
++			RT_TRACE(_module_rtl871x_sta_mgt_c_, _drv_emerg_, ("6: mp_query_drv_var(_module_rtl871x_sta_mgt_c_:6): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents));
++			RT_TRACE(_module_rtl871x_cmd_c_, _drv_emerg_, ("7: mp_query_drv_var(_module_rtl871x_cmd_c_:7): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents));
++			RT_TRACE(_module_cmd_osdep_c_, _drv_emerg_, ("8: mp_query_drv_var(_module_cmd_osdep_c_:8): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents));
++			RT_TRACE(_module_rtl871x_io_c_, _drv_emerg_, ("9: mp_query_drv_var(_module_rtl871x_io_c_:9): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents));
++			RT_TRACE(_module_io_osdep_c_, _drv_emerg_, ("10: mp_query_drv_var(_module_io_osdep_c_:10): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents));
++			RT_TRACE(_module_os_intfs_c_, _drv_emerg_, ("11: mp_query_drv_var(_module_os_intfs_c_:11): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents));
++			RT_TRACE(_module_rtl871x_security_c_, _drv_emerg_, ("12: mp_query_drv_var(_module_rtl871x_security_c_:12): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents));
++			RT_TRACE(_module_rtl871x_eeprom_c_, _drv_emerg_, ("13: mp_query_drv_var(_module_rtl871x_eeprom_c_:13): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents));
++			RT_TRACE(_module_hal_init_c_, _drv_emerg_, ("14: mp_query_drv_var(_module_hal_init_c_:14): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents));
++			RT_TRACE(_module_hci_hal_init_c_, _drv_emerg_, ("15: mp_query_drv_var(_module_hci_hal_init_c_:15): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents));
++			RT_TRACE(_module_rtl871x_ioctl_c_, _drv_emerg_, ("16: mp_query_drv_var(_module_rtl871x_ioctl_c_:16): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents));
++			RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_emerg_, ("17: mp_query_drv_var(_module_rtl871x_ioctl_set_c_:17): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents));
++			RT_TRACE(_module_rtl871x_ioctl_query_c_, _drv_emerg_, ("18: mp_query_drv_var(_module_rtl871x_ioctl_query_c_:18): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents));
++			RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_emerg_, ("19: mp_query_drv_var(_module_rtl871x_pwrctrl_c_:19): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents));
++			RT_TRACE(_module_hci_intfs_c_, _drv_emerg_, ("20: mp_query_drv_var(_module_hci_intfs_c_:20): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents));
++			RT_TRACE(_module_hci_ops_c_, _drv_emerg_, ("21: mp_query_drv_var(_module_hci_ops_c_:21): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents));
++			RT_TRACE(_module_osdep_service_c_, _drv_emerg_, ("22: mp_query_drv_var(_module_osdep_service_c_:22): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents));
++			RT_TRACE(_module_mp_, _drv_emerg_, ("23: mp_query_drv_var(_module_mp_:23): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents));
++			RT_TRACE(_module_hci_ops_os_c_, _drv_emerg_, ("24: mp_query_drv_var(_module_hci_ops_os_c_:24): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents));
++			var=(u32)(GlobalDebugComponents);
++			//GlobalDebugComponents=padapter->registrypriv.dbg_component;
++			RT_TRACE(0xffffffff, _drv_emerg_, (" ==mp_query_drv_var(_module_mp_): offset(%d;0x%x):before set dbg conpoment=0x%x(l) 0x%x(h)\n",offset,offset,GlobalDebugComponents));
++
++		}
++	}
++	else{
++		RT_TRACE(_module_mp_, _drv_emerg_, ("\n mp_query_drv_var: offset(%d) >110\n",offset));
++	}
++#endif
++#endif
++
++	return var;
++}
++#endif
++
++NDIS_STATUS oid_rt_pro_query_dr_variable_hdl(struct oid_par_priv *poid_par_priv)
++{
++#if 0
++	PADAPTER		Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++#ifdef PLATFORM_OS_XP
++	_irqL			oldirql;
++#endif
++	NDIS_STATUS		status = NDIS_STATUS_SUCCESS;
++
++	DR_VARIABLE_STRUCT	*pdrv_var;
++
++
++	if (poid_par_priv->type_of_oid != QUERY_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	*poid_par_priv->bytes_needed = sizeof(DR_VARIABLE_STRUCT);
++	if (poid_par_priv->information_buf_len < *poid_par_priv->bytes_needed)
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("+Query Information, OID_RT_PRO_QUERY_DR_VARIABLE\n"));
++
++	pdrv_var = (struct _DR_VARIABLE_STRUCT_ *)poid_par_priv->information_buf;
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	pdrv_var->variable = mp_query_drv_var(Adapter, pdrv_var->offset, pdrv_var->variable);
++	_irqlevel_changed_(&oldirql, RAISE);
++
++	*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++
++	RT_TRACE(_module_mp_, _drv_notice_,
++		 ("-oid_rt_pro_query_dr_variable_hdl: offset=0x%x valule=0x%x\n",
++		  pdrv_var->offset, pdrv_var->variable));
++
++	return status;
++#else
++	return 0;
++#endif
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_rx_packet_type_hdl(struct oid_par_priv *poid_par_priv)
++{
++#if 0
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++
++	RT_TRACE(_module_mp_, _drv_err_, ("oid_rt_pro_rx_packet_type_hdl...................\n"));
++
++	if (poid_par_priv->information_buf_len < sizeof (UCHAR)) {
++		status = NDIS_STATUS_INVALID_LENGTH;
++		*poid_par_priv->bytes_needed = sizeof(UCHAR);
++		return status;
++	}
++
++	if (poid_par_priv->type_of_oid == SET_OID) {
++		Adapter->mppriv.rx_with_status = *(UCHAR *) poid_par_priv->information_buf;
++		RT_TRACE(_module_rtl871x_ioctl_c_,_drv_err_, ("Query Information, OID_RT_PRO_RX_PACKET_TYPE:%d \n",\
++												Adapter->mppriv.rx_with_status));
++
++		//*(u32 *)&Adapter->eeprompriv.mac_addr[0]=rtw_read32(Adapter, 0x10250050);
++		//*(u16 *)&Adapter->eeprompriv.mac_addr[4]=rtw_read16(Adapter, 0x10250054);
++		RT_TRACE(_module_rtl871x_ioctl_c_,_drv_err_,("MAC addr=0x%x:0x%x:0x%x:0x%x:0x%x:0x%x  \n",
++			Adapter->eeprompriv.mac_addr[0],Adapter->eeprompriv.mac_addr[1],Adapter->eeprompriv.mac_addr[2],\
++			Adapter->eeprompriv.mac_addr[3],Adapter->eeprompriv.mac_addr[4],Adapter->eeprompriv.mac_addr[5]));
++
++	}
++	else {
++		*(UCHAR *) poid_par_priv->information_buf = Adapter->mppriv.rx_with_status;
++		*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++
++		RT_TRACE(_module_rtl871x_ioctl_c_,_drv_err_, ("Query Information, OID_RT_PRO_RX_PACKET_TYPE:%d \n", \
++												Adapter->mppriv.rx_with_status));
++
++		//*(u32 *)&Adapter->eeprompriv.mac_addr[0]=rtw_read32(Adapter, 0x10250050);
++		//*(u16 *)&Adapter->eeprompriv.mac_addr[4]=rtw_read16(Adapter, 0x10250054);
++		RT_TRACE(_module_rtl871x_ioctl_c_,_drv_err_,("MAC addr=0x%x:0x%x:0x%x:0x%x:0x%x:0x%x  \n",
++			Adapter->eeprompriv.mac_addr[0],Adapter->eeprompriv.mac_addr[1],Adapter->eeprompriv.mac_addr[2],\
++			Adapter->eeprompriv.mac_addr[3],Adapter->eeprompriv.mac_addr[4],Adapter->eeprompriv.mac_addr[5]));
++	}
++#endif
++
++	return NDIS_STATUS_SUCCESS;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_read_efuse_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL oldirql;
++#endif
++	PEFUSE_ACCESS_STRUCT pefuse;
++	u8 *data;
++	u16 addr = 0, cnts = 0, max_available_size = 0;
++	NDIS_STATUS status = NDIS_STATUS_SUCCESS;
++	PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	if (poid_par_priv->type_of_oid != QUERY_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	if (poid_par_priv->information_buf_len < sizeof(EFUSE_ACCESS_STRUCT))
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	pefuse = (PEFUSE_ACCESS_STRUCT)poid_par_priv->information_buf;
++	addr = pefuse->start_addr;
++	cnts = pefuse->cnts;
++	data = pefuse->data;
++
++	RT_TRACE(_module_mp_, _drv_notice_,
++		("+oid_rt_pro_read_efuse_hd: buf_len=%ld addr=%d cnts=%d\n",
++		 poid_par_priv->information_buf_len, addr, cnts));
++
++	EFUSE_GetEfuseDefinition(Adapter, EFUSE_WIFI, TYPE_AVAILABLE_EFUSE_BYTES_TOTAL, (PVOID)&max_available_size, _FALSE);
++
++	if ((addr + cnts) > max_available_size) {
++		RT_TRACE(_module_mp_, _drv_err_, ("!oid_rt_pro_read_efuse_hdl: parameter error!\n"));
++		return NDIS_STATUS_NOT_ACCEPTED;
++	}
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	if (rtw_efuse_access(Adapter, _FALSE, addr, cnts, data) == _FAIL) {
++		RT_TRACE(_module_mp_, _drv_err_, ("!oid_rt_pro_read_efuse_hdl: rtw_efuse_access FAIL!\n"));
++		status = NDIS_STATUS_FAILURE;
++	} else
++		*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++	_irqlevel_changed_(&oldirql, RAISE);
++
++_func_exit_;
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_write_efuse_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL oldirql;
++#endif
++	PEFUSE_ACCESS_STRUCT pefuse;
++	u8 *data;
++	u16 addr = 0, cnts = 0, max_available_size = 0;
++	NDIS_STATUS status = NDIS_STATUS_SUCCESS;
++	PADAPTER Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++
++_func_enter_;
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	pefuse = (PEFUSE_ACCESS_STRUCT)poid_par_priv->information_buf;
++	addr = pefuse->start_addr;
++	cnts = pefuse->cnts;
++	data = pefuse->data;
++
++	RT_TRACE(_module_mp_, _drv_notice_,
++		 ("+oid_rt_pro_write_efuse_hdl: buf_len=%ld addr=0x%04x cnts=%d\n",
++		  poid_par_priv->information_buf_len, addr, cnts));
++
++	EFUSE_GetEfuseDefinition(Adapter, EFUSE_WIFI, TYPE_AVAILABLE_EFUSE_BYTES_TOTAL, (PVOID)&max_available_size, _FALSE);
++
++	if ((addr + cnts) > max_available_size) {
++		RT_TRACE(_module_mp_, _drv_err_, ("!oid_rt_pro_write_efuse_hdl: parameter error"));
++		return NDIS_STATUS_NOT_ACCEPTED;
++	}
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	if (rtw_efuse_access(Adapter, _TRUE, addr, cnts, data) == _FAIL)
++		status = NDIS_STATUS_FAILURE;
++	_irqlevel_changed_(&oldirql, RAISE);
++
++_func_exit_;
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_rw_efuse_pgpkt_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	PPGPKT_STRUCT	ppgpkt;
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++//	RT_TRACE(_module_mp_, _drv_info_, ("+oid_rt_pro_rw_efuse_pgpkt_hdl\n"));
++
++	*poid_par_priv->bytes_rw = 0;
++
++	if (poid_par_priv->information_buf_len < sizeof(PGPKT_STRUCT))
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	ppgpkt = (PPGPKT_STRUCT)poid_par_priv->information_buf;
++
++	_irqlevel_changed_(&oldirql, LOWER);
++
++	if (poid_par_priv->type_of_oid == QUERY_OID)
++	{
++		RT_TRACE(_module_mp_, _drv_notice_,
++			("oid_rt_pro_rw_efuse_pgpkt_hdl: Read offset=0x%x\n",\
++			ppgpkt->offset));
++
++		Efuse_PowerSwitch(Adapter, _FALSE, _TRUE);
++		if (Efuse_PgPacketRead(Adapter, ppgpkt->offset, ppgpkt->data, _FALSE) == _TRUE)
++			*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++		else
++			status = NDIS_STATUS_FAILURE;
++		Efuse_PowerSwitch(Adapter, _FALSE, _FALSE);
++	} else {
++		RT_TRACE(_module_mp_, _drv_notice_,
++			("oid_rt_pro_rw_efuse_pgpkt_hdl: Write offset=0x%x word_en=0x%x\n",\
++			ppgpkt->offset, ppgpkt->word_en));
++
++		Efuse_PowerSwitch(Adapter, _TRUE, _TRUE);
++		if (Efuse_PgPacketWrite(Adapter, ppgpkt->offset, ppgpkt->word_en, ppgpkt->data, _FALSE) == _TRUE)
++			*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++		else
++			status = NDIS_STATUS_FAILURE;
++		Efuse_PowerSwitch(Adapter, _TRUE, _FALSE);
++	}
++
++	_irqlevel_changed_(&oldirql, RAISE);
++
++	RT_TRACE(_module_mp_, _drv_info_,
++		 ("-oid_rt_pro_rw_efuse_pgpkt_hdl: status=0x%08X\n", status));
++
++_func_exit_;
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_get_efuse_current_size_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	u16 size;
++	u8 ret;
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	if (poid_par_priv->type_of_oid != QUERY_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	if (poid_par_priv->information_buf_len <sizeof(u32))
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	ret = efuse_GetCurrentSize(Adapter, &size);
++	_irqlevel_changed_(&oldirql, RAISE);
++	if (ret == _SUCCESS) {
++		*(u32*)poid_par_priv->information_buf = size;
++		*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++	} else
++		status = NDIS_STATUS_FAILURE;
++
++_func_exit_;
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_get_efuse_max_size_hdl(struct oid_par_priv *poid_par_priv)
++{
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	if (poid_par_priv->type_of_oid != QUERY_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	if (poid_par_priv->information_buf_len < sizeof(u32))
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	*(u32*)poid_par_priv->information_buf = efuse_GetMaxSize(Adapter);
++	*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++
++	RT_TRACE(_module_mp_, _drv_info_,
++		 ("-oid_rt_get_efuse_max_size_hdl: size=%d status=0x%08X\n",
++		  *(int*)poid_par_priv->information_buf, status));
++
++_func_exit_;
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_efuse_hdl(struct oid_par_priv *poid_par_priv)
++{
++	NDIS_STATUS	status;
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_info_, ("+oid_rt_pro_efuse_hdl\n"));
++
++	if (poid_par_priv->type_of_oid == QUERY_OID)
++		status = oid_rt_pro_read_efuse_hdl(poid_par_priv);
++	else
++		status = oid_rt_pro_write_efuse_hdl(poid_par_priv);
++
++	RT_TRACE(_module_mp_, _drv_info_, ("-oid_rt_pro_efuse_hdl: status=0x%08X\n", status));
++
++_func_exit_;
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_pro_efuse_map_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	u8		*data;
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++	u16	mapLen=0;
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_pro_efuse_map_hdl\n"));
++
++	EFUSE_GetEfuseDefinition(Adapter, EFUSE_WIFI, TYPE_EFUSE_MAP_LEN, (PVOID)&mapLen, _FALSE);
++
++	*poid_par_priv->bytes_rw = 0;
++
++	if (poid_par_priv->information_buf_len < mapLen)
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	data = (u8*)poid_par_priv->information_buf;
++
++	_irqlevel_changed_(&oldirql, LOWER);
++
++	if (poid_par_priv->type_of_oid == QUERY_OID)
++	{
++		RT_TRACE(_module_mp_, _drv_info_,
++			("oid_rt_pro_efuse_map_hdl: READ\n"));
++
++		if (rtw_efuse_map_read(Adapter, 0, mapLen, data) == _SUCCESS)
++			*poid_par_priv->bytes_rw = mapLen;
++		else {
++			RT_TRACE(_module_mp_, _drv_err_,
++				("oid_rt_pro_efuse_map_hdl: READ fail\n"));
++			status = NDIS_STATUS_FAILURE;
++		}
++	} else {
++		// SET_OID
++		RT_TRACE(_module_mp_, _drv_info_,
++			("oid_rt_pro_efuse_map_hdl: WRITE\n"));
++
++		if (rtw_efuse_map_write(Adapter, 0, mapLen, data) == _SUCCESS)
++			*poid_par_priv->bytes_rw = mapLen;
++		else {
++			RT_TRACE(_module_mp_, _drv_err_,
++				("oid_rt_pro_efuse_map_hdl: WRITE fail\n"));
++			status = NDIS_STATUS_FAILURE;
++		}
++	}
++
++	_irqlevel_changed_(&oldirql, RAISE);
++
++	RT_TRACE(_module_mp_, _drv_info_,
++		 ("-oid_rt_pro_efuse_map_hdl: status=0x%08X\n", status));
++
++_func_exit_;
++
++	return status;
++}
++
++NDIS_STATUS oid_rt_set_crystal_cap_hdl(struct oid_par_priv *poid_par_priv)
++{
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++#if 0
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++
++	u32		crystal_cap = 0;
++
++_func_enter_;
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	if (poid_par_priv->information_buf_len <sizeof(u32))
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	crystal_cap = *((u32*)poid_par_priv->information_buf);//4
++	if (crystal_cap > 0xf)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	Adapter->mppriv.curr_crystalcap = crystal_cap;
++
++	_irqlevel_changed_(&oldirql,LOWER);
++	SetCrystalCap(Adapter);
++	_irqlevel_changed_(&oldirql,RAISE);
++
++_func_exit_;
++
++#endif
++	return status;
++}
++
++NDIS_STATUS oid_rt_set_rx_packet_type_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	u8		rx_pkt_type;
++//	u32		rcr_val32;
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++//	PADAPTER	padapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++_func_enter_;
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("+oid_rt_set_rx_packet_type_hdl\n"));
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	if (poid_par_priv->information_buf_len < sizeof(u8))
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	rx_pkt_type = *((u8*)poid_par_priv->information_buf);//4
++
++	RT_TRACE(_module_mp_, _drv_info_, ("rx_pkt_type: %x\n",rx_pkt_type ));
++#if 0
++	_irqlevel_changed_(&oldirql, LOWER);
++#if 0
++	rcr_val8 = rtw_read8(Adapter, 0x10250048);//RCR
++	rcr_val8 &= ~(RCR_AB|RCR_AM|RCR_APM|RCR_AAP);
++
++	if(rx_pkt_type == RX_PKT_BROADCAST){
++		rcr_val8 |= (RCR_AB | RCR_ACRC32 );
++	}
++	else if(rx_pkt_type == RX_PKT_DEST_ADDR){
++		rcr_val8 |= (RCR_AAP| RCR_AM |RCR_ACRC32);
++	}
++	else if(rx_pkt_type == RX_PKT_PHY_MATCH){
++		rcr_val8 |= (RCR_APM|RCR_ACRC32);
++	}
++	else{
++		rcr_val8 &= ~(RCR_AAP|RCR_APM|RCR_AM|RCR_AB|RCR_ACRC32);
++	}
++	rtw_write8(padapter, 0x10250048,rcr_val8);
++#else
++	rcr_val32 = rtw_read32(padapter, RCR);//RCR = 0x10250048
++	rcr_val32 &= ~(RCR_CBSSID|RCR_AB|RCR_AM|RCR_APM|RCR_AAP);
++#if 0
++	if(rx_pkt_type == RX_PKT_BROADCAST){
++		rcr_val32 |= (RCR_AB|RCR_AM|RCR_APM|RCR_AAP|RCR_ACRC32);
++	}
++	else if(rx_pkt_type == RX_PKT_DEST_ADDR){
++		//rcr_val32 |= (RCR_CBSSID|RCR_AAP|RCR_AM|RCR_ACRC32);
++		rcr_val32 |= (RCR_CBSSID|RCR_APM|RCR_ACRC32);
++	}
++	else if(rx_pkt_type == RX_PKT_PHY_MATCH){
++		rcr_val32 |= (RCR_APM|RCR_ACRC32);
++		//rcr_val32 |= (RCR_AAP|RCR_ACRC32);
++	}
++	else{
++		rcr_val32 &= ~(RCR_AAP|RCR_APM|RCR_AM|RCR_AB|RCR_ACRC32);
++	}
++#else
++	switch (rx_pkt_type)
++	{
++		case RX_PKT_BROADCAST :
++			rcr_val32 |= (RCR_AB|RCR_AM|RCR_APM|RCR_AAP|RCR_ACRC32);
++			break;
++		case RX_PKT_DEST_ADDR :
++			rcr_val32 |= (RCR_AB|RCR_AM|RCR_APM|RCR_AAP|RCR_ACRC32);
++			break;
++		case RX_PKT_PHY_MATCH:
++			rcr_val32 |= (RCR_APM|RCR_ACRC32);
++			break;
++		default:
++			rcr_val32 &= ~(RCR_AAP|RCR_APM|RCR_AM|RCR_AB|RCR_ACRC32);
++			break;
++	}
++
++	if (rx_pkt_type == RX_PKT_DEST_ADDR) {
++		padapter->mppriv.check_mp_pkt = 1;
++	} else {
++		padapter->mppriv.check_mp_pkt = 0;
++	}
++#endif
++	rtw_write32(padapter, RCR, rcr_val32);
++
++#endif
++	_irqlevel_changed_(&oldirql, RAISE);
++#endif
++_func_exit_;
++
++	return status;
++}
++
++NDIS_STATUS oid_rt_pro_set_tx_agc_offset_hdl(struct oid_par_priv *poid_par_priv)
++{
++#if 0
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++
++	u32 		txagc;
++
++_func_enter_;
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	if (poid_par_priv->information_buf_len < sizeof(u32))
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	txagc = *(u32*)poid_par_priv->information_buf;
++	RT_TRACE(_module_mp_, _drv_info_,
++		 ("oid_rt_pro_set_tx_agc_offset_hdl: 0x%08x\n", txagc));
++
++	_irqlevel_changed_(&oldirql, LOWER);
++	SetTxAGCOffset(Adapter, txagc);
++	_irqlevel_changed_(&oldirql, RAISE);
++
++_func_exit_;
++
++	return status;
++#else
++	return 0;
++#endif
++}
++
++NDIS_STATUS oid_rt_pro_set_pkt_test_mode_hdl(struct oid_par_priv *poid_par_priv)
++{
++#if 0
++	PADAPTER		Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++
++	NDIS_STATUS		status = NDIS_STATUS_SUCCESS;
++
++	struct mlme_priv	*pmlmepriv = &Adapter->mlmepriv;
++	struct mp_priv		*pmppriv = &Adapter->mppriv;
++	u32 			type;
++
++_func_enter_;
++
++	if (poid_par_priv->type_of_oid != SET_OID)
++		return NDIS_STATUS_NOT_ACCEPTED;
++
++	if (poid_par_priv->information_buf_len <sizeof(u32))
++		return NDIS_STATUS_INVALID_LENGTH;
++
++	type = *(u32*)poid_par_priv->information_buf;
++
++	if (_LOOPBOOK_MODE_ == type) {
++		pmppriv->mode = type;
++		set_fwstate(pmlmepriv, WIFI_MP_LPBK_STATE); //append txdesc
++		RT_TRACE(_module_mp_, _drv_info_, ("test mode change to loopback mode:0x%08x.\n", get_fwstate(pmlmepriv)));
++	} else if (_2MAC_MODE_ == type){
++		pmppriv->mode = type;
++		_clr_fwstate_(pmlmepriv, WIFI_MP_LPBK_STATE);
++		RT_TRACE(_module_mp_, _drv_info_, ("test mode change to 2mac mode:0x%08x.\n", get_fwstate(pmlmepriv)));
++	} else
++		status = NDIS_STATUS_NOT_ACCEPTED;
++
++_func_exit_;
++
++	return status;
++#else
++	return 0;
++#endif
++}
++
++unsigned int mp_ioctl_xmit_packet_hdl(struct oid_par_priv *poid_par_priv)
++{
++	PMP_XMIT_PARM pparm;
++	PADAPTER padapter;
++	struct mp_priv *pmp_priv;
++	struct pkt_attrib *pattrib;
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("+%s\n", __func__));
++
++	pparm = (PMP_XMIT_PARM)poid_par_priv->information_buf;
++	padapter = (PADAPTER)poid_par_priv->adapter_context;
++	pmp_priv = &padapter->mppriv;
++
++	if (poid_par_priv->type_of_oid == QUERY_OID) {
++		pparm->enable = !pmp_priv->tx.stop;
++		pparm->count = pmp_priv->tx.sended;
++	} else {
++		if (pparm->enable == 0) {
++			pmp_priv->tx.stop = 1;
++		} else if (pmp_priv->tx.stop == 1) {
++			pmp_priv->tx.stop = 0;
++			pmp_priv->tx.count = pparm->count;
++			pmp_priv->tx.payload = pparm->payload_type;
++			pattrib = &pmp_priv->tx.attrib;
++			pattrib->pktlen = pparm->length;
++			_rtw_memcpy(pattrib->dst, pparm->da, ETH_ALEN);
++			SetPacketTx(padapter);
++		} else
++			return NDIS_STATUS_FAILURE;
++	}
++
++	return NDIS_STATUS_SUCCESS;
++}
++
++#if 0
++unsigned int mp_ioctl_xmit_packet_hdl(struct oid_par_priv *poid_par_priv)
++{
++	unsigned char *pframe, *pmp_pkt;
++	struct ethhdr *pethhdr;
++	struct pkt_attrib *pattrib;
++	struct rtw_ieee80211_hdr *pwlanhdr;
++	unsigned short *fctrl;
++	int llc_sz, payload_len;
++	struct mp_xmit_frame *pxframe=  NULL;
++	struct mp_xmit_packet *pmp_xmitpkt = (struct mp_xmit_packet*)param;
++	u8 addr3[] = {0x02, 0xE0, 0x4C, 0x87, 0x66, 0x55};
++
++//	DBG_871X("+mp_ioctl_xmit_packet_hdl\n");
++
++	pxframe = alloc_mp_xmitframe(&padapter->mppriv);
++	if (pxframe == NULL)
++	{
++		DEBUG_ERR(("Can't alloc pmpframe %d:%s\n", __LINE__, __FILE__));
++		return -1;
++	}
++
++	//mp_xmit_pkt
++	payload_len = pmp_xmitpkt->len - 14;
++	pmp_pkt = (unsigned char*)pmp_xmitpkt->mem;
++	pethhdr = (struct ethhdr *)pmp_pkt;
++
++	//DBG_871X("payload_len=%d, pkt_mem=0x%x\n", pmp_xmitpkt->len, (void*)pmp_xmitpkt->mem);
++
++	//DBG_871X("pxframe=0x%x\n", (void*)pxframe);
++	//DBG_871X("pxframe->mem=0x%x\n", (void*)pxframe->mem);
++
++	//update attribute
++	pattrib = &pxframe->attrib;
++	memset((u8 *)(pattrib), 0, sizeof (struct pkt_attrib));
++	pattrib->pktlen = pmp_xmitpkt->len;
++	pattrib->ether_type = ntohs(pethhdr->h_proto);
++	pattrib->hdrlen = 24;
++	pattrib->nr_frags = 1;
++	pattrib->priority = 0;
++#ifndef CONFIG_MP_LINUX
++	if(IS_MCAST(pethhdr->h_dest))
++		pattrib->mac_id = 4;
++	else
++		pattrib->mac_id = 5;
++#else
++	pattrib->mac_id = 5;
++#endif
++
++	//
++	memset(pxframe->mem, 0 , WLANHDR_OFFSET);
++	pframe = (u8 *)(pxframe->mem) + WLANHDR_OFFSET;
++
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++	SetFrameSubType(pframe, WIFI_DATA);
++
++	_rtw_memcpy(pwlanhdr->addr1, pethhdr->h_dest, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr2, pethhdr->h_source, ETH_ALEN);
++
++	_rtw_memcpy(pwlanhdr->addr3, addr3, ETH_ALEN);
++
++	pwlanhdr->seq_ctl = 0;
++	pframe += pattrib->hdrlen;
++
++	llc_sz= rtw_put_snap(pframe, pattrib->ether_type);
++	pframe += llc_sz;
++
++	_rtw_memcpy(pframe, (void*)(pmp_pkt+14),  payload_len);
++
++	pattrib->last_txcmdsz = pattrib->hdrlen + llc_sz + payload_len;
++
++	DEBUG_INFO(("issuing mp_xmit_frame, tx_len=%d, ether_type=0x%x\n", pattrib->last_txcmdsz, pattrib->ether_type));
++	xmit_mp_frame(padapter, pxframe);
++
++	return _SUCCESS;
++}
++#endif
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_set_power_down_hdl(struct oid_par_priv *poid_par_priv)
++{
++#ifdef PLATFORM_OS_XP
++	_irqL		oldirql;
++#endif
++	u8		bpwrup;
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++#ifdef PLATFORM_LINUX
++#ifdef CONFIG_SDIO_HCI
++	PADAPTER	padapter = (PADAPTER)(poid_par_priv->adapter_context);
++#endif
++#endif
++
++_func_enter_;
++
++	if (poid_par_priv->type_of_oid != SET_OID) {
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}
++
++	RT_TRACE(_module_mp_, _drv_info_,
++		 ("\n ===> Setoid_rt_set_power_down_hdl.\n"));
++
++	_irqlevel_changed_(&oldirql, LOWER);
++
++	bpwrup = *(u8 *)poid_par_priv->information_buf;
++	//CALL  the power_down function
++#ifdef PLATFORM_LINUX
++#ifdef CONFIG_SDIO_HCI
++	dev_power_down(padapter,bpwrup);
++#endif
++#endif
++	_irqlevel_changed_(&oldirql, RAISE);
++
++	//DEBUG_ERR(("\n <=== Query OID_RT_PRO_READ_REGISTER.
++	//	Add:0x%08x Width:%d Value:0x%08x\n",RegRWStruct->offset,RegRWStruct->width,RegRWStruct->value));
++
++_func_exit_;
++
++	return status;
++}
++//------------------------------------------------------------------------------
++NDIS_STATUS oid_rt_get_power_mode_hdl(struct oid_par_priv *poid_par_priv)
++{
++#if 0
++	NDIS_STATUS	status = NDIS_STATUS_SUCCESS;
++	PADAPTER	Adapter = (PADAPTER)(poid_par_priv->adapter_context);
++//#ifdef PLATFORM_OS_XP
++//	_irqL		oldirql;
++//#endif
++
++_func_enter_;
++
++	if (poid_par_priv->type_of_oid != QUERY_OID) {
++		status = NDIS_STATUS_NOT_ACCEPTED;
++		return status;
++	}
++	if (poid_par_priv->information_buf_len < sizeof(u32)) {
++		status = NDIS_STATUS_INVALID_LENGTH;
++		return status;
++	}
++
++	RT_TRACE(_module_mp_, _drv_info_,
++		 ("\n ===> oid_rt_get_power_mode_hdl.\n"));
++
++//	_irqlevel_changed_(&oldirql, LOWER);
++	*(int*)poid_par_priv->information_buf = Adapter->registrypriv.low_power ? POWER_LOW : POWER_NORMAL;
++	*poid_par_priv->bytes_rw = poid_par_priv->information_buf_len;
++//	_irqlevel_changed_(&oldirql, RAISE);
++
++_func_exit_;
++
++	return status;
++#else
++	return 0;
++#endif
++}
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_p2p.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_p2p.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_p2p.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_p2p.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,5294 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _RTW_P2P_C_
++
++#include <drv_types.h>
++#include <rtw_p2p.h>
++#include <wifi.h>
++
++#ifdef CONFIG_P2P
++
++int rtw_p2p_is_channel_list_ok( u8 desired_ch, u8* ch_list, u8 ch_cnt )
++{
++	int found = 0, i = 0;
++
++	for( i = 0; i < ch_cnt; i++ )
++	{
++		if ( ch_list[ i ] == desired_ch )
++		{
++			found = 1;
++			break;
++		}
++	}
++	return( found );
++}
++
++int is_any_client_associated(_adapter *padapter)
++{
++	return padapter->stapriv.asoc_list_cnt ? _TRUE : _FALSE;
++}
++
++static u32 go_add_group_info_attr(struct wifidirect_info *pwdinfo, u8 *pbuf)
++{
++	_irqL irqL;
++	_list	*phead, *plist;
++	u32 len=0;
++	u16 attr_len = 0;
++	u8 tmplen, *pdata_attr, *pstart, *pcur;
++	struct sta_info *psta = NULL;
++	_adapter *padapter = pwdinfo->padapter;
++	struct sta_priv *pstapriv = &padapter->stapriv;
++
++	DBG_871X("%s\n", __FUNCTION__);
++
++	pdata_attr = rtw_zmalloc(MAX_P2P_IE_LEN);
++
++	pstart = pdata_attr;
++	pcur = pdata_attr;
++
++	_enter_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++	phead = &pstapriv->asoc_list;
++	plist = get_next(phead);
++
++	//look up sta asoc_queue
++	while ((rtw_end_of_queue_search(phead, plist)) == _FALSE)	
++	{		
++		psta = LIST_CONTAINOR(plist, struct sta_info, asoc_list);
++		
++		plist = get_next(plist);
++		
++
++		if(psta->is_p2p_device)
++		{
++			tmplen = 0;
++			
++			pcur++;
++		
++			//P2P device address
++			_rtw_memcpy(pcur, psta->dev_addr, ETH_ALEN);
++			pcur += ETH_ALEN;
++
++			//P2P interface address
++			_rtw_memcpy(pcur, psta->hwaddr, ETH_ALEN);
++			pcur += ETH_ALEN;
++
++			*pcur = psta->dev_cap;
++			pcur++;
++
++			//*(u16*)(pcur) = cpu_to_be16(psta->config_methods);
++			RTW_PUT_BE16(pcur, psta->config_methods);
++			pcur += 2;
++
++			_rtw_memcpy(pcur, psta->primary_dev_type, 8);
++			pcur += 8;
++
++			*pcur = psta->num_of_secdev_type;
++			pcur++;
++
++			_rtw_memcpy(pcur, psta->secdev_types_list, psta->num_of_secdev_type*8);
++			pcur += psta->num_of_secdev_type*8;
++			
++			if(psta->dev_name_len>0)
++			{
++				//*(u16*)(pcur) = cpu_to_be16( WPS_ATTR_DEVICE_NAME );
++				RTW_PUT_BE16(pcur, WPS_ATTR_DEVICE_NAME);
++				pcur += 2;
++
++				//*(u16*)(pcur) = cpu_to_be16( psta->dev_name_len );
++				RTW_PUT_BE16(pcur, psta->dev_name_len);
++				pcur += 2;
++
++				_rtw_memcpy(pcur, psta->dev_name, psta->dev_name_len);
++				pcur += psta->dev_name_len;
++			}
++
++
++			tmplen = (u8)(pcur-pstart);
++			
++			*pstart = (tmplen-1);
++
++			attr_len += tmplen;
++
++			//pstart += tmplen;
++			pstart = pcur;
++			
++		}
++		
++		
++	}
++	_exit_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++
++	if(attr_len>0)
++	{
++		len = rtw_set_p2p_attr_content(pbuf, P2P_ATTR_GROUP_INFO, attr_len, pdata_attr);
++	}
++
++	rtw_mfree(pdata_attr, MAX_P2P_IE_LEN);
++
++	return len;
++
++}
++
++static void issue_group_disc_req(struct wifidirect_info *pwdinfo, u8 *da)
++{
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	unsigned char					*pframe;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	unsigned short				*fctrl;
++	_adapter *padapter = pwdinfo->padapter;
++	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);	
++	unsigned char category = RTW_WLAN_CATEGORY_P2P;//P2P action frame	
++	u32	p2poui = cpu_to_be32(P2POUI);
++	u8	oui_subtype = P2P_GO_DISC_REQUEST;
++	u8	dialogToken=0;
++
++	DBG_871X("[%s]\n", __FUNCTION__);
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);
++
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++
++	_rtw_memcpy(pwlanhdr->addr1, da, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr2, pwdinfo->interface_addr, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr3, pwdinfo->interface_addr, ETH_ALEN);
++
++	SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq);
++	pmlmeext->mgnt_seq++;
++	SetFrameSubType(pframe, WIFI_ACTION);
++
++	pframe += sizeof(struct rtw_ieee80211_hdr_3addr);
++	pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr);
++
++	//Build P2P action frame header
++	pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen));	
++	pframe = rtw_set_fixed_ie(pframe, 4, (unsigned char *) &(p2poui), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(oui_subtype), &(pattrib->pktlen));	
++	pframe = rtw_set_fixed_ie(pframe, 1, &(dialogToken), &(pattrib->pktlen));		
++
++	//there is no IE in this P2P action frame
++
++	pattrib->last_txcmdsz = pattrib->pktlen;
++
++	dump_mgntframe(padapter, pmgntframe);
++
++}
++
++static void issue_p2p_devdisc_resp(struct wifidirect_info *pwdinfo, u8 *da, u8 status, u8 dialogToken)
++{	
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	unsigned char					*pframe;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	unsigned short				*fctrl;
++	_adapter *padapter = pwdinfo->padapter;
++	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);	
++	unsigned char category = RTW_WLAN_CATEGORY_PUBLIC;
++	u8			action = P2P_PUB_ACTION_ACTION;
++	u32			p2poui = cpu_to_be32(P2POUI);
++	u8			oui_subtype = P2P_DEVDISC_RESP;
++	u8 p2pie[8] = { 0x00 };
++	u32 p2pielen = 0;	
++
++	DBG_871X("[%s]\n", __FUNCTION__);
++	
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);
++
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++
++	_rtw_memcpy(pwlanhdr->addr1, da, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr2, pwdinfo->device_addr, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr3, pwdinfo->device_addr, ETH_ALEN);
++
++	SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq);
++	pmlmeext->mgnt_seq++;
++	SetFrameSubType(pframe, WIFI_ACTION);
++
++	pframe += sizeof(struct rtw_ieee80211_hdr_3addr);
++	pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr);
++
++	//Build P2P public action frame header
++	pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 4, (unsigned char *) &(p2poui), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(oui_subtype), &(pattrib->pktlen));	
++	pframe = rtw_set_fixed_ie(pframe, 1, &(dialogToken), &(pattrib->pktlen));		
++
++
++	//Build P2P IE
++	//	P2P OUI
++	p2pielen = 0;
++	p2pie[ p2pielen++ ] = 0x50;
++	p2pie[ p2pielen++ ] = 0x6F;
++	p2pie[ p2pielen++ ] = 0x9A;
++	p2pie[ p2pielen++ ] = 0x09;	//	WFA P2P v1.0
++
++	// P2P_ATTR_STATUS
++	p2pielen += rtw_set_p2p_attr_content(&p2pie[p2pielen], P2P_ATTR_STATUS, 1, &status);
++	
++	pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, p2pielen, p2pie, &pattrib->pktlen);	
++
++	pattrib->last_txcmdsz = pattrib->pktlen;
++
++	dump_mgntframe(padapter, pmgntframe);
++
++}
++
++static void issue_p2p_provision_resp(struct wifidirect_info *pwdinfo, u8* raddr, u8* frame_body, u16 config_method)
++{
++	_adapter *padapter = pwdinfo->padapter;
++	unsigned char category = RTW_WLAN_CATEGORY_PUBLIC;
++	u8			action = P2P_PUB_ACTION_ACTION;
++	u8			dialogToken = frame_body[7];	//	The Dialog Token of provisioning discovery request frame.
++	u32			p2poui = cpu_to_be32(P2POUI);
++	u8			oui_subtype = P2P_PROVISION_DISC_RESP;
++	u8			wpsie[ 100 ] = { 0x00 };
++	u8			wpsielen = 0;
++#ifdef CONFIG_WFD
++	u32					wfdielen = 0;
++#endif //CONFIG_WFD		
++	
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	unsigned char					*pframe;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	unsigned short				*fctrl;
++	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);
++
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++
++	_rtw_memcpy(pwlanhdr->addr1, raddr, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr3, myid(&(padapter->eeprompriv)), ETH_ALEN);
++
++	SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq);
++	pmlmeext->mgnt_seq++;
++	SetFrameSubType(pframe, WIFI_ACTION);
++
++	pframe += sizeof(struct rtw_ieee80211_hdr_3addr);
++	pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr);
++
++	pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 4, (unsigned char *) &(p2poui), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(oui_subtype), &(pattrib->pktlen));	
++	pframe = rtw_set_fixed_ie(pframe, 1, &(dialogToken), &(pattrib->pktlen));		
++
++	wpsielen = 0;
++	//	WPS OUI
++	//*(u32*) ( wpsie ) = cpu_to_be32( WPSOUI );
++	RTW_PUT_BE32(wpsie, WPSOUI);
++	wpsielen += 4;
++
++#if 0
++	//	WPS version
++	//	Type:
++	*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_VER1 );
++	wpsielen += 2;
++
++	//	Length:
++	*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0001 );
++	wpsielen += 2;
++
++	//	Value:
++	wpsie[wpsielen++] = WPS_VERSION_1;	//	Version 1.0
++#endif
++
++	//	Config Method
++	//	Type:
++	//*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_CONF_METHOD );
++	RTW_PUT_BE16(wpsie + wpsielen, WPS_ATTR_CONF_METHOD);
++	wpsielen += 2;
++
++	//	Length:
++	//*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0002 );
++	RTW_PUT_BE16(wpsie + wpsielen, 0x0002);
++	wpsielen += 2;
++
++	//	Value:
++	//*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( config_method );
++	RTW_PUT_BE16(wpsie + wpsielen, config_method);
++	wpsielen += 2;
++
++	pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, wpsielen, (unsigned char *) wpsie, &pattrib->pktlen );	
++
++#ifdef CONFIG_WFD
++	wfdielen = build_provdisc_resp_wfd_ie(pwdinfo, pframe);
++	pframe += wfdielen;
++	pattrib->pktlen += wfdielen;
++#endif //CONFIG_WFD
++
++	pattrib->last_txcmdsz = pattrib->pktlen;
++
++	dump_mgntframe(padapter, pmgntframe);
++
++	return;
++
++}
++
++static void issue_p2p_presence_resp(struct wifidirect_info *pwdinfo, u8 *da, u8 status, u8 dialogToken)
++{
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	unsigned char					*pframe;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	unsigned short				*fctrl;
++	_adapter *padapter = pwdinfo->padapter;
++	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);	
++	unsigned char category = RTW_WLAN_CATEGORY_P2P;//P2P action frame	
++	u32	p2poui = cpu_to_be32(P2POUI);
++	u8	oui_subtype = P2P_PRESENCE_RESPONSE;	
++	u8 p2pie[ MAX_P2P_IE_LEN] = { 0x00 };
++	u8 noa_attr_content[32] = { 0x00 };
++	u32 p2pielen = 0;
++
++	DBG_871X("[%s]\n", __FUNCTION__);
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);
++
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++
++	_rtw_memcpy(pwlanhdr->addr1, da, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr2, pwdinfo->interface_addr, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr3, pwdinfo->interface_addr, ETH_ALEN);
++
++	SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq);
++	pmlmeext->mgnt_seq++;
++	SetFrameSubType(pframe, WIFI_ACTION);
++
++	pframe += sizeof(struct rtw_ieee80211_hdr_3addr);
++	pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr);
++
++	//Build P2P action frame header
++	pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen));	
++	pframe = rtw_set_fixed_ie(pframe, 4, (unsigned char *) &(p2poui), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(oui_subtype), &(pattrib->pktlen));	
++	pframe = rtw_set_fixed_ie(pframe, 1, &(dialogToken), &(pattrib->pktlen));	
++
++
++	//Add P2P IE header
++	//	P2P OUI
++	p2pielen = 0;
++	p2pie[ p2pielen++ ] = 0x50;
++	p2pie[ p2pielen++ ] = 0x6F;
++	p2pie[ p2pielen++ ] = 0x9A;
++	p2pie[ p2pielen++ ] = 0x09;	//	WFA P2P v1.0
++
++	//Add Status attribute in P2P IE 
++	p2pielen += rtw_set_p2p_attr_content(&p2pie[p2pielen], P2P_ATTR_STATUS, 1, &status);
++
++	//Add NoA attribute in P2P IE
++	noa_attr_content[0] = 0x1;//index
++	noa_attr_content[1] = 0x0;//CTWindow and OppPS Parameters
++	
++	//todo: Notice of Absence Descriptor(s)
++	
++	p2pielen += rtw_set_p2p_attr_content(&p2pie[p2pielen], P2P_ATTR_NOA, 2, noa_attr_content);
++
++
++
++	pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, p2pielen, p2pie, &(pattrib->pktlen));
++
++	
++	pattrib->last_txcmdsz = pattrib->pktlen;
++
++	dump_mgntframe(padapter, pmgntframe);
++
++}
++
++u32 build_beacon_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pbuf)
++{
++	u8 p2pie[ MAX_P2P_IE_LEN] = { 0x00 };
++	u16 capability=0;
++	u32 len=0, p2pielen = 0;
++	
++
++	//	P2P OUI
++	p2pielen = 0;
++	p2pie[ p2pielen++ ] = 0x50;
++	p2pie[ p2pielen++ ] = 0x6F;
++	p2pie[ p2pielen++ ] = 0x9A;
++	p2pie[ p2pielen++ ] = 0x09;	//	WFA P2P v1.0
++
++
++	//	According to the P2P Specification, the beacon frame should contain 3 P2P attributes
++	//	1. P2P Capability
++	//	2. P2P Device ID
++	//	3. Notice of Absence ( NOA )	
++
++	//	P2P Capability ATTR
++	//	Type:
++	//	Length:
++	//	Value:
++	//	Device Capability Bitmap, 1 byte
++	//	Be able to participate in additional P2P Groups and
++	//	support the P2P Invitation Procedure	
++	//	Group Capability Bitmap, 1 byte	
++	capability = P2P_DEVCAP_INVITATION_PROC|P2P_DEVCAP_CLIENT_DISCOVERABILITY;
++	capability |=  ((P2P_GRPCAP_GO | P2P_GRPCAP_INTRABSS) << 8);
++	if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_PROVISIONING_ING))
++		capability |= (P2P_GRPCAP_GROUP_FORMATION<<8);
++
++	capability = cpu_to_le16(capability);
++
++	p2pielen += rtw_set_p2p_attr_content(&p2pie[p2pielen], P2P_ATTR_CAPABILITY, 2, (u8*)&capability);
++
++	
++	// P2P Device ID ATTR
++	p2pielen += rtw_set_p2p_attr_content(&p2pie[p2pielen], P2P_ATTR_DEVICE_ID, ETH_ALEN, pwdinfo->device_addr);
++
++	
++	// Notice of Absence ATTR
++	//	Type: 
++	//	Length:
++	//	Value:
++	
++	//go_add_noa_attr(pwdinfo);
++	
++	
++	pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, p2pielen, (unsigned char *) p2pie, &len);
++	
++	
++	return len;
++	
++}
++
++#ifdef CONFIG_WFD
++u32 build_beacon_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf)
++{
++	u8 wfdie[ MAX_WFD_IE_LEN] = { 0x00 };
++	u32 len=0, wfdielen = 0;
++	_adapter *padapter = pwdinfo->padapter;
++	struct mlme_priv		*pmlmepriv = &padapter->mlmepriv;
++	struct wifi_display_info*	pwfd_info = padapter->wdinfo.wfd_info;
++
++	//	WFD OUI
++	wfdielen = 0;
++	wfdie[ wfdielen++ ] = 0x50;
++	wfdie[ wfdielen++ ] = 0x6F;
++	wfdie[ wfdielen++ ] = 0x9A;
++	wfdie[ wfdielen++ ] = 0x0A;	//	WFA WFD v1.0
++
++	//	Commented by Albert 20110812
++	//	According to the WFD Specification, the beacon frame should contain 4 WFD attributes
++	//	1. WFD Device Information
++	//	2. Associated BSSID
++	//	3. Coupled Sink Information
++
++
++	//	WFD Device Information ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_DEVICE_INFO;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0006);
++	wfdielen += 2;
++
++	//	Value1:
++	//	WFD device information
++
++	if ( P2P_ROLE_GO == pwdinfo->role )
++	{
++		if ( is_any_client_associated( pwdinfo->padapter ) )
++		{
++			//	WFD primary sink + WiFi Direct mode + WSD (WFD Service Discovery)
++			RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_WSD );			
++		}
++		else
++		{
++			//	WFD primary sink + available for WFD session + WiFi Direct mode + WSD (WFD Service Discovery)
++			RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_SESSION_AVAIL | WFD_DEVINFO_WSD );
++		}
++
++	}
++	else
++	{
++		//	WFD primary sink + available for WFD session + WiFi Direct mode + WSD ( WFD Service Discovery )
++		RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_SESSION_AVAIL | WFD_DEVINFO_WSD );
++	}
++	
++	wfdielen += 2;
++
++	//	Value2:
++	//	Session Management Control Port
++	//	Default TCP port for RTSP messages is 554
++	RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->rtsp_ctrlport );
++	wfdielen += 2;
++
++	//	Value3:
++	//	WFD Device Maximum Throughput
++	//	300Mbps is the maximum throughput
++	RTW_PUT_BE16(wfdie + wfdielen, 300);
++	wfdielen += 2;
++
++	//	Associated BSSID ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_ASSOC_BSSID;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0006);
++	wfdielen += 2;
++
++	//	Value:
++	//	Associated BSSID
++	if ( check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE )
++	{
++		_rtw_memcpy( wfdie + wfdielen, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN );
++	}
++	else
++	{
++		_rtw_memset( wfdie + wfdielen, 0x00, ETH_ALEN );
++	}
++
++	wfdielen += ETH_ALEN;
++
++	//	Coupled Sink Information ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_COUPLED_SINK_INFO;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0007);
++	wfdielen += 2;
++
++	//	Value:
++	//	Coupled Sink Status bitmap
++	//	Not coupled/available for Coupling
++	wfdie[ wfdielen++ ] = 0;
++	//  MAC Addr.
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++
++	pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, wfdielen, (unsigned char *) wfdie, &len);
++
++	return len;
++	
++}
++
++u32 build_probe_req_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf)
++{
++	u8 wfdie[ MAX_WFD_IE_LEN] = { 0x00 };
++	u32 len=0, wfdielen = 0;
++	_adapter *padapter = pwdinfo->padapter;
++	struct mlme_priv		*pmlmepriv = &padapter->mlmepriv;
++	struct wifi_display_info*	pwfd_info = padapter->wdinfo.wfd_info;
++
++	//	WFD OUI
++	wfdielen = 0;
++	wfdie[ wfdielen++ ] = 0x50;
++	wfdie[ wfdielen++ ] = 0x6F;
++	wfdie[ wfdielen++ ] = 0x9A;
++	wfdie[ wfdielen++ ] = 0x0A;	//	WFA WFD v1.0
++
++	//	Commented by Albert 20110812
++	//	According to the WFD Specification, the probe request frame should contain 4 WFD attributes
++	//	1. WFD Device Information
++	//	2. Associated BSSID
++	//	3. Coupled Sink Information
++
++
++	//	WFD Device Information ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_DEVICE_INFO;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0006);
++	wfdielen += 2;
++
++	//	Value1:
++	//	WFD device information
++	
++	if ( 1 == pwdinfo->wfd_tdls_enable )
++	{
++		//	WFD primary sink + available for WFD session + WiFi TDLS mode + WSC ( WFD Service Discovery )	
++		RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | 
++						WFD_DEVINFO_SESSION_AVAIL | 
++						WFD_DEVINFO_WSD |
++						WFD_DEVINFO_PC_TDLS );
++	}
++	else
++	{
++		//	WFD primary sink + available for WFD session + WiFi Direct mode + WSC ( WFD Service Discovery )	
++		RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type |
++						WFD_DEVINFO_SESSION_AVAIL | 
++						WFD_DEVINFO_WSD );
++	}
++	
++	wfdielen += 2;
++
++	//	Value2:
++	//	Session Management Control Port
++	//	Default TCP port for RTSP messages is 554
++	RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->rtsp_ctrlport );
++	wfdielen += 2;
++
++	//	Value3:
++	//	WFD Device Maximum Throughput
++	//	300Mbps is the maximum throughput
++	RTW_PUT_BE16(wfdie + wfdielen, 300);
++	wfdielen += 2;
++
++	//	Associated BSSID ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_ASSOC_BSSID;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0006);
++	wfdielen += 2;
++
++	//	Value:
++	//	Associated BSSID
++	if ( check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE )
++	{
++		_rtw_memcpy( wfdie + wfdielen, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN );
++	}
++	else
++	{
++		_rtw_memset( wfdie + wfdielen, 0x00, ETH_ALEN );
++	}
++
++	wfdielen += ETH_ALEN;
++
++	//	Coupled Sink Information ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_COUPLED_SINK_INFO;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0007);
++	wfdielen += 2;
++
++	//	Value:
++	//	Coupled Sink Status bitmap
++	//	Not coupled/available for Coupling
++	wfdie[ wfdielen++ ] = 0;
++	//  MAC Addr.
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++
++	pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, wfdielen, (unsigned char *) wfdie, &len);
++
++	return len;
++	
++}
++
++u32 build_probe_resp_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf, u8 tunneled)
++{
++	u8 wfdie[ MAX_WFD_IE_LEN] = { 0x00 };
++	u32 len=0, wfdielen = 0;
++	_adapter *padapter = pwdinfo->padapter;
++	struct mlme_priv		*pmlmepriv = &padapter->mlmepriv;
++	struct wifi_display_info*	pwfd_info = padapter->wdinfo.wfd_info;
++
++	//	WFD OUI
++	wfdielen = 0;
++	wfdie[ wfdielen++ ] = 0x50;
++	wfdie[ wfdielen++ ] = 0x6F;
++	wfdie[ wfdielen++ ] = 0x9A;
++	wfdie[ wfdielen++ ] = 0x0A;	//	WFA WFD v1.0
++
++	//	Commented by Albert 20110812
++	//	According to the WFD Specification, the probe response frame should contain 4 WFD attributes
++	//	1. WFD Device Information
++	//	2. Associated BSSID
++	//	3. Coupled Sink Information
++	//	4. WFD Session Information
++
++
++	//	WFD Device Information ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_DEVICE_INFO;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0006);
++	wfdielen += 2;
++
++	//	Value1:
++	//	WFD device information
++	//	WFD primary sink + available for WFD session + WiFi Direct mode
++	
++	if (  _TRUE == pwdinfo->session_available )
++	{
++		if ( P2P_ROLE_GO == pwdinfo->role )
++		{
++			if ( is_any_client_associated( pwdinfo->padapter ) )
++			{
++				if ( pwdinfo->wfd_tdls_enable )
++				{
++					//	TDLS mode + WSD ( WFD Service Discovery )
++					RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_WSD | WFD_DEVINFO_PC_TDLS | WFD_DEVINFO_HDCP_SUPPORT);
++				}
++				else
++				{
++					//	WiFi Direct mode + WSD ( WFD Service Discovery )
++					RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_WSD | WFD_DEVINFO_HDCP_SUPPORT);
++				}				
++			}
++			else
++			{
++				if ( pwdinfo->wfd_tdls_enable )
++				{
++					//	available for WFD session + TDLS mode + WSD ( WFD Service Discovery )
++					RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_SESSION_AVAIL | WFD_DEVINFO_WSD | WFD_DEVINFO_PC_TDLS | WFD_DEVINFO_HDCP_SUPPORT);
++				}
++				else
++				{
++					//	available for WFD session + WiFi Direct mode + WSD ( WFD Service Discovery )
++					RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_SESSION_AVAIL | WFD_DEVINFO_WSD | WFD_DEVINFO_HDCP_SUPPORT);
++				}				
++			}
++		}
++		else
++		{
++			if ( pwdinfo->wfd_tdls_enable )
++			{
++				//	available for WFD session + WiFi Direct mode + WSD ( WFD Service Discovery )
++				RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_SESSION_AVAIL | WFD_DEVINFO_WSD | WFD_DEVINFO_PC_TDLS | WFD_DEVINFO_HDCP_SUPPORT);
++			}
++			else
++			{
++
++				//	available for WFD session + WiFi Direct mode + WSD ( WFD Service Discovery )
++				RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_SESSION_AVAIL | WFD_DEVINFO_WSD | WFD_DEVINFO_HDCP_SUPPORT);
++			}
++		}
++	}
++	else
++	{
++		if ( pwdinfo->wfd_tdls_enable )
++		{
++			RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_WSD |WFD_DEVINFO_PC_TDLS | WFD_DEVINFO_HDCP_SUPPORT);
++		}
++		else
++		{
++			RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_WSD | WFD_DEVINFO_HDCP_SUPPORT);
++		}
++
++	}
++
++	wfdielen += 2;
++
++	//	Value2:
++	//	Session Management Control Port
++	//	Default TCP port for RTSP messages is 554
++	RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->rtsp_ctrlport );
++	wfdielen += 2;
++
++	//	Value3:
++	//	WFD Device Maximum Throughput
++	//	300Mbps is the maximum throughput
++	RTW_PUT_BE16(wfdie + wfdielen, 300);
++	wfdielen += 2;
++
++	//	Associated BSSID ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_ASSOC_BSSID;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0006);
++	wfdielen += 2;
++
++	//	Value:
++	//	Associated BSSID
++	if ( check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE )
++	{
++		_rtw_memcpy( wfdie + wfdielen, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN );
++	}
++	else
++	{
++		_rtw_memset( wfdie + wfdielen, 0x00, ETH_ALEN );
++	}
++
++	wfdielen += ETH_ALEN;
++
++	//	Coupled Sink Information ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_COUPLED_SINK_INFO;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0007);
++	wfdielen += 2;
++
++	//	Value:
++	//	Coupled Sink Status bitmap
++	//	Not coupled/available for Coupling
++	wfdie[ wfdielen++ ] = 0;
++	//  MAC Addr.
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++
++	if ( P2P_ROLE_GO == pwdinfo->role )
++	{
++		//	WFD Session Information ATTR
++		//	Type:
++		wfdie[ wfdielen++ ] = WFD_ATTR_SESSION_INFO;
++
++		//	Length:
++		//	Note: In the WFD specification, the size of length field is 2.
++		RTW_PUT_BE16(wfdie + wfdielen, 0x0000);
++		wfdielen += 2;
++
++		//	Todo: to add the list of WFD device info descriptor in WFD group.
++
++	}
++#ifdef CONFIG_CONCURRENT_MODE
++#ifdef CONFIG_TDLS
++	if ( ( tunneled == 0 ) && ( padapter->pbuddy_adapter->wdinfo.wfd_tdls_enable == 1 ) )
++	{
++		//	Alternative MAC Address ATTR
++		//	Type:
++		wfdie[ wfdielen++ ] = WFD_ATTR_ALTER_MAC;
++
++		//	Length:
++		//	Note: In the WFD specification, the size of length field is 2.
++		RTW_PUT_BE16(wfdie + wfdielen,  ETH_ALEN );
++		wfdielen += 2;
++
++		//	Value:
++		//	Alternative MAC Address
++		_rtw_memcpy( wfdie + wfdielen, &padapter->pbuddy_adapter->eeprompriv.mac_addr[ 0 ], ETH_ALEN );
++		//	This mac address is used to make the WFD session when TDLS is enable.
++
++		wfdielen += ETH_ALEN;
++	}
++#endif // CONFIG_TDLS
++#endif // CONFIG_CONCURRENT_MODE
++
++	pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, wfdielen, (unsigned char *) wfdie, &len);
++
++	return len;
++	
++}
++
++u32 build_assoc_req_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf)
++{
++	u8 wfdie[ MAX_WFD_IE_LEN] = { 0x00 };
++	u32 len=0, wfdielen = 0;
++	_adapter 					*padapter = NULL;
++	struct mlme_priv			*pmlmepriv = NULL;
++	struct wifi_display_info		*pwfd_info = NULL;
++
++	//	WFD OUI
++	if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE) || rtw_p2p_chk_state(pwdinfo, P2P_STATE_IDLE))
++	{
++		return 0;
++	}
++
++	padapter = pwdinfo->padapter;
++	pmlmepriv = &padapter->mlmepriv;
++	pwfd_info = padapter->wdinfo.wfd_info;
++	
++	wfdielen = 0;
++	wfdie[ wfdielen++ ] = 0x50;
++	wfdie[ wfdielen++ ] = 0x6F;
++	wfdie[ wfdielen++ ] = 0x9A;
++	wfdie[ wfdielen++ ] = 0x0A;	//	WFA WFD v1.0
++
++	//	Commented by Albert 20110812
++	//	According to the WFD Specification, the probe request frame should contain 4 WFD attributes
++	//	1. WFD Device Information
++	//	2. Associated BSSID
++	//	3. Coupled Sink Information
++
++
++	//	WFD Device Information ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_DEVICE_INFO;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0006);
++	wfdielen += 2;
++
++	//	Value1:
++	//	WFD device information
++	//	WFD primary sink + available for WFD session + WiFi Direct mode + WSD ( WFD Service Discovery )
++	RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_SESSION_AVAIL | WFD_DEVINFO_WSD );
++	wfdielen += 2;
++
++	//	Value2:
++	//	Session Management Control Port
++	//	Default TCP port for RTSP messages is 554
++	RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->rtsp_ctrlport );
++	wfdielen += 2;
++
++	//	Value3:
++	//	WFD Device Maximum Throughput
++	//	300Mbps is the maximum throughput
++	RTW_PUT_BE16(wfdie + wfdielen, 300);
++	wfdielen += 2;
++
++	//	Associated BSSID ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_ASSOC_BSSID;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0006);
++	wfdielen += 2;
++
++	//	Value:
++	//	Associated BSSID
++	if ( check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE )
++	{
++		_rtw_memcpy( wfdie + wfdielen, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN );
++	}
++	else
++	{
++		_rtw_memset( wfdie + wfdielen, 0x00, ETH_ALEN );
++	}
++
++	wfdielen += ETH_ALEN;
++
++	//	Coupled Sink Information ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_COUPLED_SINK_INFO;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0007);
++	wfdielen += 2;
++
++	//	Value:
++	//	Coupled Sink Status bitmap
++	//	Not coupled/available for Coupling
++	wfdie[ wfdielen++ ] = 0;
++	//  MAC Addr.
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++
++	pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, wfdielen, (unsigned char *) wfdie, &len);
++
++	return len;
++	
++}
++
++u32 build_assoc_resp_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf)
++{
++	u8 wfdie[ MAX_WFD_IE_LEN] = { 0x00 };
++	u32 len=0, wfdielen = 0;
++	_adapter *padapter = pwdinfo->padapter;
++	struct mlme_priv		*pmlmepriv = &padapter->mlmepriv;
++	struct wifi_display_info*	pwfd_info = padapter->wdinfo.wfd_info;
++
++	//	WFD OUI
++	wfdielen = 0;
++	wfdie[ wfdielen++ ] = 0x50;
++	wfdie[ wfdielen++ ] = 0x6F;
++	wfdie[ wfdielen++ ] = 0x9A;
++	wfdie[ wfdielen++ ] = 0x0A;	//	WFA WFD v1.0
++
++	//	Commented by Albert 20110812
++	//	According to the WFD Specification, the probe request frame should contain 4 WFD attributes
++	//	1. WFD Device Information
++	//	2. Associated BSSID
++	//	3. Coupled Sink Information
++
++
++	//	WFD Device Information ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_DEVICE_INFO;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0006);
++	wfdielen += 2;
++
++	//	Value1:
++	//	WFD device information
++	//	WFD primary sink + available for WFD session + WiFi Direct mode + WSD ( WFD Service Discovery )
++	RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_SESSION_AVAIL | WFD_DEVINFO_WSD );
++	wfdielen += 2;
++
++	//	Value2:
++	//	Session Management Control Port
++	//	Default TCP port for RTSP messages is 554
++	RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->rtsp_ctrlport );
++	wfdielen += 2;
++
++	//	Value3:
++	//	WFD Device Maximum Throughput
++	//	300Mbps is the maximum throughput
++	RTW_PUT_BE16(wfdie + wfdielen, 300);
++	wfdielen += 2;
++
++	//	Associated BSSID ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_ASSOC_BSSID;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0006);
++	wfdielen += 2;
++
++	//	Value:
++	//	Associated BSSID
++	if ( check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE )
++	{
++		_rtw_memcpy( wfdie + wfdielen, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN );
++	}
++	else
++	{
++		_rtw_memset( wfdie + wfdielen, 0x00, ETH_ALEN );
++	}
++
++	wfdielen += ETH_ALEN;
++
++	//	Coupled Sink Information ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_COUPLED_SINK_INFO;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0007);
++	wfdielen += 2;
++
++	//	Value:
++	//	Coupled Sink Status bitmap
++	//	Not coupled/available for Coupling
++	wfdie[ wfdielen++ ] = 0;
++	//  MAC Addr.
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++
++	pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, wfdielen, (unsigned char *) wfdie, &len);
++
++	return len;
++	
++}
++
++u32 build_nego_req_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf)
++{
++	u8 wfdie[ MAX_WFD_IE_LEN] = { 0x00 };
++	u32 len=0, wfdielen = 0;
++	_adapter *padapter = pwdinfo->padapter;
++	struct mlme_priv		*pmlmepriv = &padapter->mlmepriv;
++	struct wifi_display_info*	pwfd_info = padapter->wdinfo.wfd_info;
++
++	//	WFD OUI
++	wfdielen = 0;
++	wfdie[ wfdielen++ ] = 0x50;
++	wfdie[ wfdielen++ ] = 0x6F;
++	wfdie[ wfdielen++ ] = 0x9A;
++	wfdie[ wfdielen++ ] = 0x0A;	//	WFA WFD v1.0
++
++	//	Commented by Albert 20110825
++	//	According to the WFD Specification, the negotiation request frame should contain 3 WFD attributes
++	//	1. WFD Device Information
++	//	2. Associated BSSID ( Optional )
++	//	3. Local IP Adress ( Optional )
++
++
++	//	WFD Device Information ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_DEVICE_INFO;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0006);
++	wfdielen += 2;
++
++	//	Value1:
++	//	WFD device information
++	//	WFD primary sink + WiFi Direct mode + WSD ( WFD Service Discovery ) + WFD Session Available
++	RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_WSD | WFD_DEVINFO_SESSION_AVAIL);
++	wfdielen += 2;
++
++	//	Value2:
++	//	Session Management Control Port
++	//	Default TCP port for RTSP messages is 554
++	RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->rtsp_ctrlport );
++	wfdielen += 2;
++
++	//	Value3:
++	//	WFD Device Maximum Throughput
++	//	300Mbps is the maximum throughput
++	RTW_PUT_BE16(wfdie + wfdielen, 300);
++	wfdielen += 2;
++
++	//	Associated BSSID ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_ASSOC_BSSID;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0006);
++	wfdielen += 2;
++
++	//	Value:
++	//	Associated BSSID
++	if ( check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE )
++	{
++		_rtw_memcpy( wfdie + wfdielen, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN );
++	}
++	else
++	{
++		_rtw_memset( wfdie + wfdielen, 0x00, ETH_ALEN );
++	}
++
++	wfdielen += ETH_ALEN;
++
++	//	Coupled Sink Information ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_COUPLED_SINK_INFO;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0007);
++	wfdielen += 2;
++
++	//	Value:
++	//	Coupled Sink Status bitmap
++	//	Not coupled/available for Coupling
++	wfdie[ wfdielen++ ] = 0;
++	//  MAC Addr.
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++
++	pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, wfdielen, (unsigned char *) wfdie, &len);
++
++	return len;
++	
++}
++
++u32 build_nego_resp_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf)
++{
++	u8 wfdie[ MAX_WFD_IE_LEN] = { 0x00 };
++	u32 len=0, wfdielen = 0;
++	_adapter *padapter = pwdinfo->padapter;
++	struct mlme_priv		*pmlmepriv = &padapter->mlmepriv;
++	struct wifi_display_info*	pwfd_info = padapter->wdinfo.wfd_info;
++
++	//	WFD OUI
++	wfdielen = 0;
++	wfdie[ wfdielen++ ] = 0x50;
++	wfdie[ wfdielen++ ] = 0x6F;
++	wfdie[ wfdielen++ ] = 0x9A;
++	wfdie[ wfdielen++ ] = 0x0A;	//	WFA WFD v1.0
++
++	//	Commented by Albert 20110825
++	//	According to the WFD Specification, the negotiation request frame should contain 3 WFD attributes
++	//	1. WFD Device Information
++	//	2. Associated BSSID ( Optional )
++	//	3. Local IP Adress ( Optional )
++
++
++	//	WFD Device Information ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_DEVICE_INFO;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0006);
++	wfdielen += 2;
++
++	//	Value1:
++	//	WFD device information
++	//	WFD primary sink + WiFi Direct mode + WSD ( WFD Service Discovery ) + WFD Session Available
++	RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_WSD | WFD_DEVINFO_SESSION_AVAIL);
++	wfdielen += 2;
++
++	//	Value2:
++	//	Session Management Control Port
++	//	Default TCP port for RTSP messages is 554
++	RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->rtsp_ctrlport );
++	wfdielen += 2;
++
++	//	Value3:
++	//	WFD Device Maximum Throughput
++	//	300Mbps is the maximum throughput
++	RTW_PUT_BE16(wfdie + wfdielen, 300);
++	wfdielen += 2;
++
++	//	Associated BSSID ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_ASSOC_BSSID;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0006);
++	wfdielen += 2;
++
++	//	Value:
++	//	Associated BSSID
++	if ( check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE )
++	{
++		_rtw_memcpy( wfdie + wfdielen, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN );
++	}
++	else
++	{
++		_rtw_memset( wfdie + wfdielen, 0x00, ETH_ALEN );
++	}
++
++	wfdielen += ETH_ALEN;
++
++	//	Coupled Sink Information ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_COUPLED_SINK_INFO;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0007);
++	wfdielen += 2;
++
++	//	Value:
++	//	Coupled Sink Status bitmap
++	//	Not coupled/available for Coupling
++	wfdie[ wfdielen++ ] = 0;
++	//  MAC Addr.
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++
++
++	pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, wfdielen, (unsigned char *) wfdie, &len);
++
++	return len;
++	
++}
++
++u32 build_nego_confirm_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf)
++{
++	u8 wfdie[ MAX_WFD_IE_LEN] = { 0x00 };
++	u32 len=0, wfdielen = 0;
++	_adapter *padapter = pwdinfo->padapter;
++	struct mlme_priv		*pmlmepriv = &padapter->mlmepriv;
++	struct wifi_display_info*	pwfd_info = padapter->wdinfo.wfd_info;
++
++	//	WFD OUI
++	wfdielen = 0;
++	wfdie[ wfdielen++ ] = 0x50;
++	wfdie[ wfdielen++ ] = 0x6F;
++	wfdie[ wfdielen++ ] = 0x9A;
++	wfdie[ wfdielen++ ] = 0x0A;	//	WFA WFD v1.0
++
++	//	Commented by Albert 20110825
++	//	According to the WFD Specification, the negotiation request frame should contain 3 WFD attributes
++	//	1. WFD Device Information
++	//	2. Associated BSSID ( Optional )
++	//	3. Local IP Adress ( Optional )
++
++
++	//	WFD Device Information ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_DEVICE_INFO;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0006);
++	wfdielen += 2;
++
++	//	Value1:
++	//	WFD device information
++	//	WFD primary sink + WiFi Direct mode + WSD ( WFD Service Discovery ) + WFD Session Available
++	RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_WSD | WFD_DEVINFO_SESSION_AVAIL);
++	wfdielen += 2;
++
++	//	Value2:
++	//	Session Management Control Port
++	//	Default TCP port for RTSP messages is 554
++	RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->rtsp_ctrlport );
++	wfdielen += 2;
++
++	//	Value3:
++	//	WFD Device Maximum Throughput
++	//	300Mbps is the maximum throughput
++	RTW_PUT_BE16(wfdie + wfdielen, 300);
++	wfdielen += 2;
++
++	//	Associated BSSID ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_ASSOC_BSSID;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0006);
++	wfdielen += 2;
++
++	//	Value:
++	//	Associated BSSID
++	if ( check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE )
++	{
++		_rtw_memcpy( wfdie + wfdielen, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN );
++	}
++	else
++	{
++		_rtw_memset( wfdie + wfdielen, 0x00, ETH_ALEN );
++	}
++
++	wfdielen += ETH_ALEN;
++
++	//	Coupled Sink Information ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_COUPLED_SINK_INFO;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0007);
++	wfdielen += 2;
++
++	//	Value:
++	//	Coupled Sink Status bitmap
++	//	Not coupled/available for Coupling
++	wfdie[ wfdielen++ ] = 0;
++	//  MAC Addr.
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++
++
++	pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, wfdielen, (unsigned char *) wfdie, &len);
++
++	return len;
++	
++}
++
++u32 build_invitation_req_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf)
++{
++	u8 wfdie[ MAX_WFD_IE_LEN] = { 0x00 };
++	u32 len=0, wfdielen = 0;
++	_adapter *padapter = pwdinfo->padapter;
++	struct mlme_priv		*pmlmepriv = &padapter->mlmepriv;
++	struct wifi_display_info*	pwfd_info = padapter->wdinfo.wfd_info;
++
++	//	WFD OUI
++	wfdielen = 0;
++	wfdie[ wfdielen++ ] = 0x50;
++	wfdie[ wfdielen++ ] = 0x6F;
++	wfdie[ wfdielen++ ] = 0x9A;
++	wfdie[ wfdielen++ ] = 0x0A;	//	WFA WFD v1.0
++
++	//	Commented by Albert 20110825
++	//	According to the WFD Specification, the provision discovery request frame should contain 3 WFD attributes
++	//	1. WFD Device Information
++	//	2. Associated BSSID ( Optional )
++	//	3. Local IP Adress ( Optional )
++
++
++	//	WFD Device Information ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_DEVICE_INFO;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0006);
++	wfdielen += 2;
++
++	//	Value1:
++	//	WFD device information
++	//	WFD primary sink + available for WFD session + WiFi Direct mode + WSD ( WFD Service Discovery )
++	RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_SESSION_AVAIL | WFD_DEVINFO_WSD );
++	wfdielen += 2;
++
++	//	Value2:
++	//	Session Management Control Port
++	//	Default TCP port for RTSP messages is 554
++	RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->rtsp_ctrlport );
++	wfdielen += 2;
++
++	//	Value3:
++	//	WFD Device Maximum Throughput
++	//	300Mbps is the maximum throughput
++	RTW_PUT_BE16(wfdie + wfdielen, 300);
++	wfdielen += 2;
++
++	//	Associated BSSID ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_ASSOC_BSSID;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0006);
++	wfdielen += 2;
++
++	//	Value:
++	//	Associated BSSID
++	if ( check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE )
++	{
++		_rtw_memcpy( wfdie + wfdielen, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN );
++	}
++	else
++	{
++		_rtw_memset( wfdie + wfdielen, 0x00, ETH_ALEN );
++	}
++
++	wfdielen += ETH_ALEN;
++
++	//	Coupled Sink Information ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_COUPLED_SINK_INFO;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0007);
++	wfdielen += 2;
++
++	//	Value:
++	//	Coupled Sink Status bitmap
++	//	Not coupled/available for Coupling
++	wfdie[ wfdielen++ ] = 0;
++	//  MAC Addr.
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++
++	if ( P2P_ROLE_GO == pwdinfo->role )
++	{
++		//	WFD Session Information ATTR
++		//	Type:
++		wfdie[ wfdielen++ ] = WFD_ATTR_SESSION_INFO;
++
++		//	Length:
++		//	Note: In the WFD specification, the size of length field is 2.
++		RTW_PUT_BE16(wfdie + wfdielen, 0x0000);
++		wfdielen += 2;
++
++		//	Todo: to add the list of WFD device info descriptor in WFD group.
++
++	}
++
++	pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, wfdielen, (unsigned char *) wfdie, &len);
++
++	return len;
++	
++}
++
++u32 build_invitation_resp_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf)
++{
++	u8 wfdie[ MAX_WFD_IE_LEN] = { 0x00 };
++	u32 len=0, wfdielen = 0;
++	_adapter *padapter = pwdinfo->padapter;
++	struct mlme_priv		*pmlmepriv = &padapter->mlmepriv;
++	struct wifi_display_info*	pwfd_info = padapter->wdinfo.wfd_info;
++
++	//	WFD OUI
++	wfdielen = 0;
++	wfdie[ wfdielen++ ] = 0x50;
++	wfdie[ wfdielen++ ] = 0x6F;
++	wfdie[ wfdielen++ ] = 0x9A;
++	wfdie[ wfdielen++ ] = 0x0A;	//	WFA WFD v1.0
++
++	//	Commented by Albert 20110825
++	//	According to the WFD Specification, the provision discovery request frame should contain 3 WFD attributes
++	//	1. WFD Device Information
++	//	2. Associated BSSID ( Optional )
++	//	3. Local IP Adress ( Optional )
++
++
++	//	WFD Device Information ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_DEVICE_INFO;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0006);
++	wfdielen += 2;
++
++	//	Value1:
++	//	WFD device information
++	//	WFD primary sink + available for WFD session + WiFi Direct mode + WSD ( WFD Service Discovery )
++	RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_SESSION_AVAIL | WFD_DEVINFO_WSD );
++	wfdielen += 2;
++
++	//	Value2:
++	//	Session Management Control Port
++	//	Default TCP port for RTSP messages is 554
++	RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->rtsp_ctrlport );
++	wfdielen += 2;
++
++	//	Value3:
++	//	WFD Device Maximum Throughput
++	//	300Mbps is the maximum throughput
++	RTW_PUT_BE16(wfdie + wfdielen, 300);
++	wfdielen += 2;
++
++	//	Associated BSSID ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_ASSOC_BSSID;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0006);
++	wfdielen += 2;
++
++	//	Value:
++	//	Associated BSSID
++	if ( check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE )
++	{
++		_rtw_memcpy( wfdie + wfdielen, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN );
++	}
++	else
++	{
++		_rtw_memset( wfdie + wfdielen, 0x00, ETH_ALEN );
++	}
++
++	wfdielen += ETH_ALEN;
++
++	//	Coupled Sink Information ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_COUPLED_SINK_INFO;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0007);
++	wfdielen += 2;
++
++	//	Value:
++	//	Coupled Sink Status bitmap
++	//	Not coupled/available for Coupling
++	wfdie[ wfdielen++ ] = 0;
++	//  MAC Addr.
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++
++	if ( P2P_ROLE_GO == pwdinfo->role )
++	{
++		//	WFD Session Information ATTR
++		//	Type:
++		wfdie[ wfdielen++ ] = WFD_ATTR_SESSION_INFO;
++
++		//	Length:
++		//	Note: In the WFD specification, the size of length field is 2.
++		RTW_PUT_BE16(wfdie + wfdielen, 0x0000);
++		wfdielen += 2;
++
++		//	Todo: to add the list of WFD device info descriptor in WFD group.
++
++	}
++
++	pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, wfdielen, (unsigned char *) wfdie, &len);
++
++	return len;
++	
++}
++
++u32 build_provdisc_req_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf)
++{
++	u8 wfdie[ MAX_WFD_IE_LEN] = { 0x00 };
++	u32 len=0, wfdielen = 0;
++	_adapter *padapter = pwdinfo->padapter;
++	struct mlme_priv		*pmlmepriv = &padapter->mlmepriv;
++	struct wifi_display_info*	pwfd_info = padapter->wdinfo.wfd_info;
++
++	//	WFD OUI
++	wfdielen = 0;
++	wfdie[ wfdielen++ ] = 0x50;
++	wfdie[ wfdielen++ ] = 0x6F;
++	wfdie[ wfdielen++ ] = 0x9A;
++	wfdie[ wfdielen++ ] = 0x0A;	//	WFA WFD v1.0
++
++	//	Commented by Albert 20110825
++	//	According to the WFD Specification, the provision discovery request frame should contain 3 WFD attributes
++	//	1. WFD Device Information
++	//	2. Associated BSSID ( Optional )
++	//	3. Local IP Adress ( Optional )
++
++
++	//	WFD Device Information ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_DEVICE_INFO;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0006);
++	wfdielen += 2;
++
++	//	Value1:
++	//	WFD device information
++	//	WFD primary sink + available for WFD session + WiFi Direct mode + WSD ( WFD Service Discovery )
++	RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_SESSION_AVAIL | WFD_DEVINFO_WSD );
++	wfdielen += 2;
++
++	//	Value2:
++	//	Session Management Control Port
++	//	Default TCP port for RTSP messages is 554
++	RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->rtsp_ctrlport );
++	wfdielen += 2;
++
++	//	Value3:
++	//	WFD Device Maximum Throughput
++	//	300Mbps is the maximum throughput
++	RTW_PUT_BE16(wfdie + wfdielen, 300);
++	wfdielen += 2;
++
++	//	Associated BSSID ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_ASSOC_BSSID;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0006);
++	wfdielen += 2;
++
++	//	Value:
++	//	Associated BSSID
++	if ( check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE )
++	{
++		_rtw_memcpy( wfdie + wfdielen, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN );
++	}
++	else
++	{
++		_rtw_memset( wfdie + wfdielen, 0x00, ETH_ALEN );
++	}
++
++	wfdielen += ETH_ALEN;
++
++	//	Coupled Sink Information ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_COUPLED_SINK_INFO;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0007);
++	wfdielen += 2;
++
++	//	Value:
++	//	Coupled Sink Status bitmap
++	//	Not coupled/available for Coupling
++	wfdie[ wfdielen++ ] = 0;
++	//  MAC Addr.
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++
++
++	pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, wfdielen, (unsigned char *) wfdie, &len);
++
++	return len;
++	
++}
++
++u32 build_provdisc_resp_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf)
++{
++	u8 wfdie[ MAX_WFD_IE_LEN] = { 0x00 };
++	u32 len=0, wfdielen = 0;
++	_adapter *padapter = pwdinfo->padapter;
++	struct mlme_priv		*pmlmepriv = &padapter->mlmepriv;
++	struct wifi_display_info*	pwfd_info = padapter->wdinfo.wfd_info;
++
++	//	WFD OUI
++	wfdielen = 0;
++	wfdie[ wfdielen++ ] = 0x50;
++	wfdie[ wfdielen++ ] = 0x6F;
++	wfdie[ wfdielen++ ] = 0x9A;
++	wfdie[ wfdielen++ ] = 0x0A;	//	WFA WFD v1.0
++
++	//	Commented by Albert 20110825
++	//	According to the WFD Specification, the provision discovery response frame should contain 3 WFD attributes
++	//	1. WFD Device Information
++	//	2. Associated BSSID ( Optional )
++	//	3. Local IP Adress ( Optional )
++
++
++	//	WFD Device Information ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_DEVICE_INFO;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0006);
++	wfdielen += 2;
++
++	//	Value1:
++	//	WFD device information
++	//	WFD primary sink + available for WFD session + WiFi Direct mode + WSD ( WFD Service Discovery )
++	RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_SESSION_AVAIL | WFD_DEVINFO_WSD );
++	wfdielen += 2;
++
++	//	Value2:
++	//	Session Management Control Port
++	//	Default TCP port for RTSP messages is 554
++	RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->rtsp_ctrlport );
++	wfdielen += 2;
++
++	//	Value3:
++	//	WFD Device Maximum Throughput
++	//	300Mbps is the maximum throughput
++	RTW_PUT_BE16(wfdie + wfdielen, 300);
++	wfdielen += 2;
++
++	//	Associated BSSID ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_ASSOC_BSSID;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0006);
++	wfdielen += 2;
++
++	//	Value:
++	//	Associated BSSID
++	if ( check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE )
++	{
++		_rtw_memcpy( wfdie + wfdielen, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN );
++	}
++	else
++	{
++		_rtw_memset( wfdie + wfdielen, 0x00, ETH_ALEN );
++	}
++
++	wfdielen += ETH_ALEN;
++
++	//	Coupled Sink Information ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_COUPLED_SINK_INFO;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0007);
++	wfdielen += 2;
++
++	//	Value:
++	//	Coupled Sink Status bitmap
++	//	Not coupled/available for Coupling
++	wfdie[ wfdielen++ ] = 0;
++	//  MAC Addr.
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++	wfdie[ wfdielen++ ] = 0;
++
++	pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, wfdielen, (unsigned char *) wfdie, &len);
++
++	return len;
++	
++}
++
++#endif //CONFIG_WFD
++
++u32 build_probe_resp_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pbuf)
++{
++	u8 p2pie[ MAX_P2P_IE_LEN] = { 0x00 };
++	u32 len=0, p2pielen = 0;	
++#ifdef CONFIG_INTEL_WIDI
++	struct mlme_priv *pmlmepriv = &(pwdinfo->padapter->mlmepriv);
++	u8 zero_array_check[L2SDTA_SERVICE_VE_LEN] = { 0x00 };
++	u8 widi_version = 0, i = 0;
++
++	if( _rtw_memcmp( pmlmepriv->sa_ext, zero_array_check, L2SDTA_SERVICE_VE_LEN ) == _FALSE )
++	{
++		widi_version = 35;
++	}
++	else if( pmlmepriv->num_p2p_sdt != 0 )
++	{
++		widi_version = 40;
++	}
++#endif //CONFIG_INTEL_WIDI
++
++	//	P2P OUI
++	p2pielen = 0;
++	p2pie[ p2pielen++ ] = 0x50;
++	p2pie[ p2pielen++ ] = 0x6F;
++	p2pie[ p2pielen++ ] = 0x9A;
++	p2pie[ p2pielen++ ] = 0x09;	//	WFA P2P v1.0
++
++	//	Commented by Albert 20100907
++	//	According to the P2P Specification, the probe response frame should contain 5 P2P attributes
++	//	1. P2P Capability
++	//	2. Extended Listen Timing
++	//	3. Notice of Absence ( NOA )	( Only GO needs this )
++	//	4. Device Info
++	//	5. Group Info	( Only GO need this )
++
++	//	P2P Capability ATTR
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_CAPABILITY;
++
++	//	Length:
++	//*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0002 );
++	RTW_PUT_LE16(p2pie + p2pielen, 0x0002);
++	p2pielen += 2;
++
++	//	Value:
++	//	Device Capability Bitmap, 1 byte
++	p2pie[ p2pielen++ ] = DMP_P2P_DEVCAP_SUPPORT;
++	
++	//	Group Capability Bitmap, 1 byte
++	if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO))
++	{
++		p2pie[ p2pielen ] = (P2P_GRPCAP_GO | P2P_GRPCAP_INTRABSS);
++
++		if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_PROVISIONING_ING))
++			p2pie[ p2pielen ] |= P2P_GRPCAP_GROUP_FORMATION;
++
++		p2pielen++;
++	}
++	else if ( rtw_p2p_chk_role(pwdinfo, P2P_ROLE_DEVICE) )
++	{
++		//	Group Capability Bitmap, 1 byte
++		if ( pwdinfo->persistent_supported )
++			p2pie[ p2pielen++ ] = P2P_GRPCAP_PERSISTENT_GROUP | DMP_P2P_GRPCAP_SUPPORT;
++		else
++			p2pie[ p2pielen++ ] = DMP_P2P_GRPCAP_SUPPORT;
++
++	}
++
++	//	Extended Listen Timing ATTR
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_EX_LISTEN_TIMING;
++
++	//	Length:
++	//*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0004 );
++	RTW_PUT_LE16(p2pie + p2pielen, 0x0004);
++	p2pielen += 2;
++
++	//	Value:
++	//	Availability Period
++	//*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0xFFFF );
++	RTW_PUT_LE16(p2pie + p2pielen, 0xFFFF);
++	p2pielen += 2;
++
++	//	Availability Interval
++	//*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0xFFFF );
++	RTW_PUT_LE16(p2pie + p2pielen, 0xFFFF);
++	p2pielen += 2;
++
++
++	// Notice of Absence ATTR
++	//	Type: 
++	//	Length:
++	//	Value:
++	if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO))
++	{
++		//go_add_noa_attr(pwdinfo);
++	}	
++
++	//	Device Info ATTR
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_DEVICE_INFO;
++
++	//	Length:
++	//	21 -> P2P Device Address (6bytes) + Config Methods (2bytes) + Primary Device Type (8bytes) 
++	//	+ NumofSecondDevType (1byte) + WPS Device Name ID field (2bytes) + WPS Device Name Len field (2bytes)
++	//*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 21 + pwdinfo->device_name_len );
++#ifdef CONFIG_INTEL_WIDI
++	if( widi_version == 35 )
++	{
++		RTW_PUT_LE16(p2pie + p2pielen, 21 + 8 + pwdinfo->device_name_len);
++	}
++	else if( widi_version == 40 )
++	{
++		RTW_PUT_LE16(p2pie + p2pielen, 21 + 8 * pmlmepriv->num_p2p_sdt + pwdinfo->device_name_len);
++	}
++	else
++#endif //CONFIG_INTEL_WIDI
++	RTW_PUT_LE16(p2pie + p2pielen, 21 + pwdinfo->device_name_len);
++	p2pielen += 2;
++
++	//	Value:
++	//	P2P Device Address
++	_rtw_memcpy( p2pie + p2pielen, pwdinfo->device_addr, ETH_ALEN );
++	p2pielen += ETH_ALEN;
++
++	//	Config Method
++	//	This field should be big endian. Noted by P2P specification.
++	//*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( pwdinfo->supported_wps_cm );
++	RTW_PUT_BE16(p2pie + p2pielen, pwdinfo->supported_wps_cm);
++	p2pielen += 2;
++
++#ifdef CONFIG_INTEL_WIDI
++	if( widi_version == 40 )
++	{
++		//	Primary Device Type
++		//	Category ID
++		//*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_CID_MULIT_MEDIA );
++		RTW_PUT_BE16(p2pie + p2pielen, pmlmepriv->p2p_pdt_cid );
++		p2pielen += 2;
++
++		//	OUI
++		//*(u32*) ( p2pie + p2pielen ) = cpu_to_be32( WPSOUI );
++		RTW_PUT_BE32(p2pie + p2pielen, WPSOUI);
++		p2pielen += 4;
++
++		//	Sub Category ID
++		//*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_SCID_MEDIA_SERVER );
++		RTW_PUT_BE16(p2pie + p2pielen, pmlmepriv->p2p_pdt_scid);
++		p2pielen += 2;
++	}
++	else
++#endif //CONFIG_INTEL_WIDI
++	{
++		//	Primary Device Type
++		//	Category ID
++		//*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_CID_MULIT_MEDIA );
++		RTW_PUT_BE16(p2pie + p2pielen, WPS_PDT_CID_MULIT_MEDIA);
++		p2pielen += 2;
++
++		//	OUI
++		//*(u32*) ( p2pie + p2pielen ) = cpu_to_be32( WPSOUI );
++		RTW_PUT_BE32(p2pie + p2pielen, WPSOUI);
++		p2pielen += 4;
++
++		//	Sub Category ID
++		//*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_SCID_MEDIA_SERVER );
++		RTW_PUT_BE16(p2pie + p2pielen, WPS_PDT_SCID_MEDIA_SERVER);
++		p2pielen += 2;
++	}
++
++	//	Number of Secondary Device Types
++#ifdef CONFIG_INTEL_WIDI
++	if( widi_version == 35 )
++	{
++		p2pie[ p2pielen++ ] = 0x01;
++		
++		RTW_PUT_BE16(p2pie + p2pielen, WPS_PDT_CID_DISPLAYS);
++		p2pielen += 2;
++
++		RTW_PUT_BE32(p2pie + p2pielen, INTEL_DEV_TYPE_OUI);
++		p2pielen += 4;
++
++		RTW_PUT_BE16(p2pie + p2pielen, P2P_SCID_WIDI_CONSUMER_SINK);
++		p2pielen += 2;
++	}
++	else if( widi_version == 40 )
++	{
++		p2pie[ p2pielen++ ] = pmlmepriv->num_p2p_sdt;
++		for( ; i < pmlmepriv->num_p2p_sdt; i++ )
++		{
++			RTW_PUT_BE16(p2pie + p2pielen, pmlmepriv->p2p_sdt_cid[i]);
++			p2pielen += 2;
++
++			RTW_PUT_BE32(p2pie + p2pielen, INTEL_DEV_TYPE_OUI);
++			p2pielen += 4;
++
++			RTW_PUT_BE16(p2pie + p2pielen, pmlmepriv->p2p_sdt_scid[i]);
++			p2pielen += 2;
++		}
++	}
++	else
++#endif //CONFIG_INTEL_WIDI
++	p2pie[ p2pielen++ ] = 0x00;	//	No Secondary Device Type List
++
++	//	Device Name
++	//	Type:
++	//*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_ATTR_DEVICE_NAME );
++	RTW_PUT_BE16(p2pie + p2pielen, WPS_ATTR_DEVICE_NAME);
++	p2pielen += 2;
++
++	//	Length:
++	//*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( pwdinfo->device_name_len );
++	RTW_PUT_BE16(p2pie + p2pielen, pwdinfo->device_name_len);
++	p2pielen += 2;
++
++	//	Value:
++	_rtw_memcpy( p2pie + p2pielen, pwdinfo->device_name, pwdinfo->device_name_len );
++	p2pielen += pwdinfo->device_name_len;
++
++	// Group Info ATTR
++	//	Type:
++	//	Length:
++	//	Value:
++	if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO))
++	{
++		p2pielen += go_add_group_info_attr(pwdinfo, p2pie + p2pielen);
++	}
++
++	
++	pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, p2pielen, (unsigned char *) p2pie, &len);
++	
++
++	return len;
++	
++}
++
++u32 build_prov_disc_request_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pbuf, u8* pssid, u8 ussidlen, u8* pdev_raddr )
++{
++	u8 p2pie[ MAX_P2P_IE_LEN] = { 0x00 };
++	u32 len=0, p2pielen = 0;	
++
++	//	P2P OUI
++	p2pielen = 0;
++	p2pie[ p2pielen++ ] = 0x50;
++	p2pie[ p2pielen++ ] = 0x6F;
++	p2pie[ p2pielen++ ] = 0x9A;
++	p2pie[ p2pielen++ ] = 0x09;	//	WFA P2P v1.0
++
++	//	Commented by Albert 20110301
++	//	According to the P2P Specification, the provision discovery request frame should contain 3 P2P attributes
++	//	1. P2P Capability
++	//	2. Device Info
++	//	3. Group ID ( When joining an operating P2P Group )
++
++	//	P2P Capability ATTR
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_CAPABILITY;
++
++	//	Length:
++	//*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0002 );
++	RTW_PUT_LE16(p2pie + p2pielen, 0x0002);
++	p2pielen += 2;
++
++	//	Value:
++	//	Device Capability Bitmap, 1 byte
++	p2pie[ p2pielen++ ] = DMP_P2P_DEVCAP_SUPPORT;
++	
++	//	Group Capability Bitmap, 1 byte
++	if ( pwdinfo->persistent_supported )
++		p2pie[ p2pielen++ ] = P2P_GRPCAP_PERSISTENT_GROUP | DMP_P2P_GRPCAP_SUPPORT;
++	else
++		p2pie[ p2pielen++ ] = DMP_P2P_GRPCAP_SUPPORT;
++
++
++	//	Device Info ATTR
++	//	Type:
++	p2pie[ p2pielen++ ] = P2P_ATTR_DEVICE_INFO;
++
++	//	Length:
++	//	21 -> P2P Device Address (6bytes) + Config Methods (2bytes) + Primary Device Type (8bytes) 
++	//	+ NumofSecondDevType (1byte) + WPS Device Name ID field (2bytes) + WPS Device Name Len field (2bytes)
++	//*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 21 + pwdinfo->device_name_len );
++	RTW_PUT_LE16(p2pie + p2pielen, 21 + pwdinfo->device_name_len);
++	p2pielen += 2;
++
++	//	Value:
++	//	P2P Device Address
++	_rtw_memcpy( p2pie + p2pielen, pwdinfo->device_addr, ETH_ALEN );
++	p2pielen += ETH_ALEN;
++
++	//	Config Method
++	//	This field should be big endian. Noted by P2P specification.
++	if ( pwdinfo->ui_got_wps_info == P2P_GOT_WPSINFO_PBC )
++	{
++		//*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_CONFIG_METHOD_PBC );
++		RTW_PUT_BE16(p2pie + p2pielen, WPS_CONFIG_METHOD_PBC);
++	}
++	else
++	{
++		//*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_CONFIG_METHOD_DISPLAY );
++		RTW_PUT_BE16(p2pie + p2pielen, WPS_CONFIG_METHOD_DISPLAY);
++	}
++
++	p2pielen += 2;
++
++	//	Primary Device Type
++	//	Category ID
++	//*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_CID_MULIT_MEDIA );
++	RTW_PUT_BE16(p2pie + p2pielen, WPS_PDT_CID_MULIT_MEDIA);
++	p2pielen += 2;
++
++	//	OUI
++	//*(u32*) ( p2pie + p2pielen ) = cpu_to_be32( WPSOUI );
++	RTW_PUT_BE32(p2pie + p2pielen, WPSOUI);
++	p2pielen += 4;
++
++	//	Sub Category ID
++	//*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_PDT_SCID_MEDIA_SERVER );
++	RTW_PUT_BE16(p2pie + p2pielen, WPS_PDT_SCID_MEDIA_SERVER);
++	p2pielen += 2;
++
++	//	Number of Secondary Device Types
++	p2pie[ p2pielen++ ] = 0x00;	//	No Secondary Device Type List
++
++	//	Device Name
++	//	Type:
++	//*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( WPS_ATTR_DEVICE_NAME );
++	RTW_PUT_BE16(p2pie + p2pielen, WPS_ATTR_DEVICE_NAME);
++	p2pielen += 2;
++
++	//	Length:
++	//*(u16*) ( p2pie + p2pielen ) = cpu_to_be16( pwdinfo->device_name_len );
++	RTW_PUT_BE16(p2pie + p2pielen, pwdinfo->device_name_len);
++	p2pielen += 2;
++
++	//	Value:
++	_rtw_memcpy( p2pie + p2pielen, pwdinfo->device_name, pwdinfo->device_name_len );
++	p2pielen += pwdinfo->device_name_len;
++
++	if ( rtw_p2p_chk_role(pwdinfo, P2P_ROLE_CLIENT) )
++	{
++		//	Added by Albert 2011/05/19
++		//	In this case, the pdev_raddr is the device address of the group owner.
++		
++		//	P2P Group ID ATTR
++		//	Type:
++		p2pie[ p2pielen++ ] = P2P_ATTR_GROUP_ID;
++
++		//	Length:
++		//*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( ETH_ALEN + ussidlen );
++		RTW_PUT_LE16(p2pie + p2pielen, ETH_ALEN + ussidlen);
++		p2pielen += 2;
++
++		//	Value:
++		_rtw_memcpy( p2pie + p2pielen, pdev_raddr, ETH_ALEN );
++		p2pielen += ETH_ALEN;
++
++		_rtw_memcpy( p2pie + p2pielen, pssid, ussidlen );
++		p2pielen += ussidlen;
++		
++	}
++
++	pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, p2pielen, (unsigned char *) p2pie, &len);
++	
++
++	return len;
++	
++}
++
++
++u32 build_assoc_resp_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pbuf, u8 status_code)
++{
++	u8 p2pie[ MAX_P2P_IE_LEN] = { 0x00 };
++	u32 len=0, p2pielen = 0;	
++
++	//	P2P OUI
++	p2pielen = 0;
++	p2pie[ p2pielen++ ] = 0x50;
++	p2pie[ p2pielen++ ] = 0x6F;
++	p2pie[ p2pielen++ ] = 0x9A;
++	p2pie[ p2pielen++ ] = 0x09;	//	WFA P2P v1.0
++
++	// According to the P2P Specification, the Association response frame should contain 2 P2P attributes
++	//	1. Status
++	//	2. Extended Listen Timing (optional)
++
++
++	//	Status ATTR
++	p2pielen += rtw_set_p2p_attr_content(&p2pie[p2pielen], P2P_ATTR_STATUS, 1, &status_code);
++
++
++	// Extended Listen Timing ATTR
++	//	Type:
++	//	Length:
++	//	Value:
++
++
++	pbuf = rtw_set_ie(pbuf, _VENDOR_SPECIFIC_IE_, p2pielen, (unsigned char *) p2pie, &len);
++	
++	return len;
++	
++}
++
++u32 build_deauth_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pbuf)
++{
++	u32 len=0;
++	
++	return len;
++}
++
++u32 process_probe_req_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pframe, uint len)
++{	
++	u8 *p;
++	u32 ret=_FALSE;
++	u8 *p2pie;
++	u32	p2pielen = 0;
++	int ssid_len=0, rate_cnt = 0;
++
++	p = rtw_get_ie(pframe + WLAN_HDR_A3_LEN + _PROBEREQ_IE_OFFSET_, _SUPPORTEDRATES_IE_, (int *)&rate_cnt,
++			len - WLAN_HDR_A3_LEN - _PROBEREQ_IE_OFFSET_);
++
++	if ( rate_cnt <= 4 )
++	{
++		int i, g_rate =0;
++
++		for( i = 0; i < rate_cnt; i++ )
++		{
++			if ( ( ( *( p + 2 + i ) & 0xff ) != 0x02 ) &&
++				( ( *( p + 2 + i ) & 0xff ) != 0x04 ) &&
++				( ( *( p + 2 + i ) & 0xff ) != 0x0B ) &&
++				( ( *( p + 2 + i ) & 0xff ) != 0x16 ) )
++			{
++				g_rate = 1;
++			}
++		}
++
++		if ( g_rate == 0 )
++		{
++			//	There is no OFDM rate included in SupportedRates IE of this probe request frame
++			//	The driver should response this probe request.
++			return ret;
++		}
++	}
++	else
++	{
++		//	rate_cnt > 4 means the SupportRates IE contains the OFDM rate because the count of CCK rates are 4.
++		//	We should proceed the following check for this probe request.
++	}
++
++	//	Added comments by Albert 20100906
++	//	There are several items we should check here.
++	//	1. This probe request frame must contain the P2P IE. (Done)
++	//	2. This probe request frame must contain the wildcard SSID. (Done)
++	//	3. Wildcard BSSID. (Todo)
++	//	4. Destination Address. ( Done in mgt_dispatcher function )
++	//	5. Requested Device Type in WSC IE. (Todo)
++	//	6. Device ID attribute in P2P IE. (Todo)
++
++	p = rtw_get_ie(pframe + WLAN_HDR_A3_LEN + _PROBEREQ_IE_OFFSET_, _SSID_IE_, (int *)&ssid_len,
++			len - WLAN_HDR_A3_LEN - _PROBEREQ_IE_OFFSET_);	
++
++	ssid_len &= 0xff;	//	Just last 1 byte is valid for ssid len of the probe request
++	if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_DEVICE) || rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO))
++	{
++		if((p2pie=rtw_get_p2p_ie( pframe + WLAN_HDR_A3_LEN + _PROBEREQ_IE_OFFSET_ , len - WLAN_HDR_A3_LEN - _PROBEREQ_IE_OFFSET_ , NULL, &p2pielen)))
++		{
++			if ( (p != NULL) && _rtw_memcmp( ( void * ) ( p+2 ), ( void * ) pwdinfo->p2p_wildcard_ssid , 7 ))
++			{
++				//todo:
++				//Check Requested Device Type attributes in WSC IE.
++				//Check Device ID attribute in P2P IE
++
++				ret = _TRUE;			
++			}		
++			else if ( (p != NULL) && ( ssid_len == 0 ) )
++			{
++				ret = _TRUE;
++			}
++		}
++		else
++		{
++			//non -p2p device
++		}
++		
++	}	
++
++	
++	return ret;
++	
++}
++
++u32 process_assoc_req_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pframe, uint len, struct sta_info *psta)
++{
++	u8 status_code = P2P_STATUS_SUCCESS;
++	u8 *pbuf, *pattr_content=NULL;
++	u32 attr_contentlen = 0;
++	u16 cap_attr=0;
++	unsigned short	frame_type, ie_offset=0;
++	u8 * ies;
++	u32 ies_len;
++	u8 * p2p_ie;
++	u32	p2p_ielen = 0;
++
++	if(!rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO))
++		return P2P_STATUS_FAIL_REQUEST_UNABLE;
++
++	frame_type = GetFrameSubType(pframe);
++	if (frame_type == WIFI_ASSOCREQ)
++	{
++		ie_offset = _ASOCREQ_IE_OFFSET_;
++	}	
++	else // WIFI_REASSOCREQ
++	{
++		ie_offset = _REASOCREQ_IE_OFFSET_;
++	}
++	
++	ies = pframe + WLAN_HDR_A3_LEN + ie_offset;
++	ies_len = len - WLAN_HDR_A3_LEN - ie_offset;
++
++	p2p_ie = rtw_get_p2p_ie(ies , ies_len , NULL, &p2p_ielen);
++
++	if ( !p2p_ie )
++	{
++		DBG_8192C( "[%s] P2P IE not Found!!\n", __FUNCTION__ );
++		status_code =  P2P_STATUS_FAIL_INVALID_PARAM;
++	}
++	else
++	{
++		DBG_8192C( "[%s] P2P IE Found!!\n", __FUNCTION__ );
++	}
++	
++	while ( p2p_ie )
++	{
++		//Check P2P Capability ATTR
++		if( rtw_get_p2p_attr_content( p2p_ie, p2p_ielen, P2P_ATTR_CAPABILITY, (u8*)&cap_attr, (uint*) &attr_contentlen) )
++		{
++			DBG_8192C( "[%s] Got P2P Capability Attr!!\n", __FUNCTION__ );
++			cap_attr = le16_to_cpu(cap_attr);
++			psta->dev_cap = cap_attr&0xff;
++		}
++
++		//Check Extended Listen Timing ATTR
++	
++
++		//Check P2P Device Info ATTR
++		if(rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_DEVICE_INFO, NULL, (uint*)&attr_contentlen))
++		{
++			DBG_8192C( "[%s] Got P2P DEVICE INFO Attr!!\n", __FUNCTION__ );		
++			pattr_content = pbuf = rtw_zmalloc(attr_contentlen);
++			if(pattr_content)
++			{
++				u8 num_of_secdev_type;
++				u16 dev_name_len;
++			
++		
++				rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_DEVICE_INFO , pattr_content, (uint*)&attr_contentlen);
++
++				_rtw_memcpy(psta->dev_addr, 	pattr_content, ETH_ALEN);//P2P Device Address
++
++				pattr_content += ETH_ALEN;
++
++				_rtw_memcpy(&psta->config_methods, pattr_content, 2);//Config Methods
++				psta->config_methods = be16_to_cpu(psta->config_methods);
++
++				pattr_content += 2;
++
++				_rtw_memcpy(psta->primary_dev_type, pattr_content, 8);
++
++				pattr_content += 8;
++
++				num_of_secdev_type = *pattr_content;
++				pattr_content += 1;
++
++				if(num_of_secdev_type==0)
++				{
++					psta->num_of_secdev_type = 0;
++				}
++				else
++				{
++					u32 len;
++
++					psta->num_of_secdev_type = num_of_secdev_type;
++
++					len = (sizeof(psta->secdev_types_list)<(num_of_secdev_type*8)) ? (sizeof(psta->secdev_types_list)) : (num_of_secdev_type*8);
++
++					_rtw_memcpy(psta->secdev_types_list, pattr_content, len);
++	
++					pattr_content += (num_of_secdev_type*8);
++				}
++
++
++				//dev_name_len = attr_contentlen - ETH_ALEN - 2 - 8 - 1 - (num_of_secdev_type*8);
++				psta->dev_name_len=0;
++				if(WPS_ATTR_DEVICE_NAME == be16_to_cpu(*(u16*)pattr_content))
++				{				
++					dev_name_len = be16_to_cpu(*(u16*)(pattr_content+2));
++
++					psta->dev_name_len = (sizeof(psta->dev_name)<dev_name_len) ? sizeof(psta->dev_name):dev_name_len;
++
++					_rtw_memcpy(psta->dev_name, pattr_content+4, psta->dev_name_len);
++				}
++
++				rtw_mfree(pbuf, attr_contentlen);
++
++			}
++
++		}
++
++		//Get the next P2P IE
++		p2p_ie = rtw_get_p2p_ie(p2p_ie+p2p_ielen, ies_len -(p2p_ie -ies + p2p_ielen), NULL, &p2p_ielen);
++		
++	}
++
++	return status_code;
++
++}
++
++u32 process_p2p_devdisc_req(struct wifidirect_info *pwdinfo, u8 *pframe, uint len)
++{
++	u8 *frame_body;
++	u8 status, dialogToken;
++	struct sta_info *psta = NULL;
++	_adapter *padapter = pwdinfo->padapter;
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	u8 *p2p_ie;
++	u32	p2p_ielen = 0;	
++	
++	frame_body = (unsigned char *)(pframe + sizeof(struct rtw_ieee80211_hdr_3addr));
++
++	dialogToken = frame_body[7];
++	status = P2P_STATUS_FAIL_UNKNOWN_P2PGROUP;
++		
++	if ( (p2p_ie=rtw_get_p2p_ie( frame_body + _PUBLIC_ACTION_IE_OFFSET_, len - _PUBLIC_ACTION_IE_OFFSET_, NULL, &p2p_ielen)) )
++	{
++		u8 groupid[ 38 ] = { 0x00 };
++		u8 dev_addr[ETH_ALEN] = { 0x00 };		
++		u32	attr_contentlen = 0;
++
++		if(rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_GROUP_ID, groupid, &attr_contentlen))
++		{
++			if(_rtw_memcmp(pwdinfo->device_addr, groupid, ETH_ALEN) && 
++				_rtw_memcmp(pwdinfo->p2p_group_ssid, groupid+ETH_ALEN, pwdinfo->p2p_group_ssid_len))
++			{
++				attr_contentlen=0;
++				if(rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_DEVICE_ID, dev_addr, &attr_contentlen))
++				{
++					_irqL irqL;
++					_list	*phead, *plist;					
++
++					_enter_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++					phead = &pstapriv->asoc_list;
++					plist = get_next(phead);
++
++					//look up sta asoc_queue
++					while ((rtw_end_of_queue_search(phead, plist)) == _FALSE)	
++					{		
++						psta = LIST_CONTAINOR(plist, struct sta_info, asoc_list);
++		
++						plist = get_next(plist);
++
++						if(psta->is_p2p_device && (psta->dev_cap&P2P_DEVCAP_CLIENT_DISCOVERABILITY) &&
++							_rtw_memcmp(psta->dev_addr, dev_addr, ETH_ALEN))
++						{
++
++							//_exit_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++							//issue GO Discoverability Request
++							issue_group_disc_req(pwdinfo, psta->hwaddr);
++							//_enter_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++							
++							status = P2P_STATUS_SUCCESS;
++							
++							break;
++						}
++						else
++						{
++							status = P2P_STATUS_FAIL_INFO_UNAVAILABLE;
++						}
++		
++					}				
++					_exit_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++					
++				}
++				else
++				{
++					status = P2P_STATUS_FAIL_INVALID_PARAM;
++				}
++
++			}
++			else
++			{
++				status = P2P_STATUS_FAIL_INVALID_PARAM;
++			}
++			
++		}	
++		
++	}
++
++	
++	//issue Device Discoverability Response
++	issue_p2p_devdisc_resp(pwdinfo, GetAddr2Ptr(pframe), status, dialogToken);
++	
++	
++	return (status==P2P_STATUS_SUCCESS) ? _TRUE:_FALSE;
++	
++}
++
++u32 process_p2p_devdisc_resp(struct wifidirect_info *pwdinfo, u8 *pframe, uint len)
++{
++	return _TRUE;
++}
++
++u8 process_p2p_provdisc_req(struct wifidirect_info *pwdinfo,  u8 *pframe, uint len )
++{
++	u8 *frame_body;
++	u8 *wpsie;
++	uint	wps_ielen = 0, attr_contentlen = 0;
++	u16	uconfig_method = 0;
++	
++
++	frame_body = (pframe + sizeof(struct rtw_ieee80211_hdr_3addr));
++
++	if ( (wpsie=rtw_get_wps_ie( frame_body + _PUBLIC_ACTION_IE_OFFSET_, len - _PUBLIC_ACTION_IE_OFFSET_, NULL, &wps_ielen)) )
++	{
++		if ( rtw_get_wps_attr_content( wpsie, wps_ielen, WPS_ATTR_CONF_METHOD , ( u8* ) &uconfig_method, &attr_contentlen) )
++		{
++			uconfig_method = be16_to_cpu( uconfig_method );
++			switch( uconfig_method )
++			{
++				case WPS_CM_DISPLYA:
++				{
++					_rtw_memcpy( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "dis", 3 );
++					break;
++				}
++				case WPS_CM_LABEL:
++				{
++					_rtw_memcpy( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "lab", 3 );
++					break;
++				}
++				case WPS_CM_PUSH_BUTTON:
++				{
++					_rtw_memcpy( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "pbc", 3 );
++					break;
++				}
++				case WPS_CM_KEYPAD:
++				{
++					_rtw_memcpy( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "pad", 3 );
++					break;
++				}
++			}
++			issue_p2p_provision_resp( pwdinfo, GetAddr2Ptr(pframe), frame_body, uconfig_method);
++		}
++	}
++	DBG_871X( "[%s] config method = %s\n", __FUNCTION__, pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req );
++	return _TRUE;
++	
++}
++	
++u8 process_p2p_provdisc_resp(struct wifidirect_info *pwdinfo,  u8 *pframe)
++{
++
++	return _TRUE;
++}
++
++u8 rtw_p2p_get_peer_ch_list(struct wifidirect_info *pwdinfo, u8 *ch_content, u8 ch_cnt, u8 *peer_ch_list)
++{
++	u8 i = 0, j = 0;
++	u8 temp = 0;
++	u8 ch_no = 0;
++	ch_content += 3;
++	ch_cnt -= 3;
++
++	while( ch_cnt > 0)
++	{
++		ch_content += 1;
++		ch_cnt -= 1;
++		temp = *ch_content;
++		for( i = 0 ; i < temp ; i++, j++ )
++		{
++			peer_ch_list[j] = *( ch_content + 1 + i );
++		}
++		ch_content += (temp + 1);
++		ch_cnt -= (temp + 1);
++		ch_no += temp ;
++	}
++
++	return ch_no;
++}
++
++u8 rtw_p2p_check_peer_oper_ch(struct mlme_ext_priv *pmlmeext, u8 ch)
++{
++	u8 i = 0;
++
++	for( i = 0; i < pmlmeext->max_chan_nums; i++ )
++	{
++		if ( pmlmeext->channel_set[ i ].ChannelNum == ch )
++		{
++			return _SUCCESS;
++		}
++	}
++
++	return _FAIL;
++}
++
++u8 rtw_p2p_ch_inclusion(struct mlme_ext_priv *pmlmeext, u8 *peer_ch_list, u8 peer_ch_num, u8 *ch_list_inclusioned)
++{
++	int	i = 0, j = 0, temp = 0;
++	u8 ch_no = 0;
++
++	for( i = 0; i < peer_ch_num; i++ )
++	{
++		for( j = temp; j < pmlmeext->max_chan_nums; j++ )
++		{
++			if( *( peer_ch_list + i ) == pmlmeext->channel_set[ j ].ChannelNum )
++			{
++				ch_list_inclusioned[ ch_no++ ] = *( peer_ch_list + i );
++				temp = j;
++				break;
++			}
++		}
++	}
++
++	return ch_no;
++}
++
++u8 process_p2p_group_negotation_req( struct wifidirect_info *pwdinfo, u8 *pframe, uint len )
++{
++	_adapter *padapter = pwdinfo->padapter;
++	u8	result = P2P_STATUS_SUCCESS;
++	u32	p2p_ielen = 0, wps_ielen = 0;
++	u8 * ies;
++	u32 ies_len;
++	u8 *p2p_ie;
++	u8 *wpsie;
++	u16		wps_devicepassword_id = 0x0000;
++	uint	wps_devicepassword_id_len = 0;
++#ifdef CONFIG_WFD
++	u8	wfd_ie[ 128 ] = { 0x00 };
++	u32	wfd_ielen = 0;
++#ifdef CONFIG_TDLS
++	struct tdls_info *ptdlsinfo = &padapter->tdlsinfo;
++#endif // CONFIG_TDLS	
++#endif // CONFIG_WFD
++#ifdef CONFIG_CONCURRENT_MODE
++	_adapter				*pbuddy_adapter = pwdinfo->padapter->pbuddy_adapter;
++	struct wifidirect_info	*pbuddy_wdinfo = &pbuddy_adapter->wdinfo;
++	struct mlme_priv		*pbuddy_mlmepriv = &pbuddy_adapter->mlmepriv;
++	struct mlme_ext_priv	*pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++#endif
++
++	if ( (wpsie=rtw_get_wps_ie( pframe + _PUBLIC_ACTION_IE_OFFSET_, len - _PUBLIC_ACTION_IE_OFFSET_, NULL, &wps_ielen)) )
++	{
++		//	Commented by Kurt 20120113
++		//	If some device wants to do p2p handshake without sending prov_disc_req
++		//	We have to get peer_req_cm from here.
++		if(_rtw_memcmp( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "000", 3) )
++		{
++			rtw_get_wps_attr_content( wpsie, wps_ielen, WPS_ATTR_DEVICE_PWID, (u8*) &wps_devicepassword_id, &wps_devicepassword_id_len);
++			wps_devicepassword_id = be16_to_cpu( wps_devicepassword_id );
++
++			if ( wps_devicepassword_id == WPS_DPID_USER_SPEC )
++			{
++				_rtw_memcpy( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "dis", 3 );
++			}
++			else if ( wps_devicepassword_id == WPS_DPID_REGISTRAR_SPEC )
++			{
++				_rtw_memcpy( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "pad", 3 );	
++			}
++			else
++			{
++				_rtw_memcpy( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, "pbc", 3 );	
++			}
++		}
++	}
++	else
++	{
++		DBG_871X( "[%s] WPS IE not Found!!\n", __FUNCTION__ );
++		result = P2P_STATUS_FAIL_INCOMPATIBLE_PARAM;
++		rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_FAIL);
++		return( result );
++	}
++
++	if ( pwdinfo->ui_got_wps_info == P2P_NO_WPSINFO )
++	{
++		result = P2P_STATUS_FAIL_INFO_UNAVAILABLE;
++		rtw_p2p_set_state(pwdinfo, P2P_STATE_TX_INFOR_NOREADY);
++		return( result );
++	}
++
++	ies = pframe + _PUBLIC_ACTION_IE_OFFSET_;
++	ies_len = len - _PUBLIC_ACTION_IE_OFFSET_;
++					
++	p2p_ie = rtw_get_p2p_ie( ies, ies_len, NULL, &p2p_ielen );
++
++	if ( !p2p_ie )
++	{
++		DBG_871X( "[%s] P2P IE not Found!!\n", __FUNCTION__ );
++		result = P2P_STATUS_FAIL_INCOMPATIBLE_PARAM;
++		rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_FAIL);
++	}
++	
++	while ( p2p_ie )
++	{
++		u8	attr_content = 0x00;
++		u32	attr_contentlen = 0;						
++		u8	ch_content[100] = { 0x00 };
++		uint	ch_cnt = 0;
++		u8	peer_ch_list[100] = { 0x00 };
++		u8	peer_ch_num = 0;
++		u8	ch_list_inclusioned[100] = { 0x00 };
++		u8	ch_num_inclusioned = 0;
++		u16	cap_attr;
++
++		rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_ING);
++
++		//Check P2P Capability ATTR
++		if(rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_CAPABILITY, (u8*)&cap_attr, (uint*)&attr_contentlen) )
++		{
++			cap_attr = le16_to_cpu(cap_attr);
++	
++#if defined(CONFIG_WFD) && defined(CONFIG_TDLS)
++			if(!(cap_attr & P2P_GRPCAP_INTRABSS) )
++				ptdlsinfo->ap_prohibited = _TRUE;
++#endif //defined(CONFIG_WFD) && defined(CONFIG_TDLS)
++		}
++
++		if ( rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_GO_INTENT , &attr_content, &attr_contentlen) )
++		{
++			DBG_871X( "[%s] GO Intent = %d, tie = %d\n", __FUNCTION__, attr_content >> 1, attr_content & 0x01 );
++			pwdinfo->peer_intent = attr_content;	//	include both intent and tie breaker values.
++
++			if ( pwdinfo->intent == ( pwdinfo->peer_intent >> 1 ) )
++			{
++				//	Try to match the tie breaker value
++				if ( pwdinfo->intent == P2P_MAX_INTENT )
++				{
++					rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE);
++					result = P2P_STATUS_FAIL_BOTH_GOINTENT_15;
++				}
++				else
++				{
++					if ( attr_content & 0x01 )
++					{
++						rtw_p2p_set_role(pwdinfo, P2P_ROLE_CLIENT);
++					}
++					else
++					{
++						rtw_p2p_set_role(pwdinfo, P2P_ROLE_GO);
++					}
++				}							
++			}
++			else if ( pwdinfo->intent > ( pwdinfo->peer_intent >> 1 ) )
++			{
++				rtw_p2p_set_role(pwdinfo, P2P_ROLE_GO);
++			}
++			else
++			{
++				rtw_p2p_set_role(pwdinfo, P2P_ROLE_CLIENT);
++			}
++
++			if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO))
++			{
++				//	Store the group id information.
++				_rtw_memcpy( pwdinfo->groupid_info.go_device_addr, pwdinfo->device_addr, ETH_ALEN );
++				_rtw_memcpy( pwdinfo->groupid_info.ssid, pwdinfo->nego_ssid, pwdinfo->nego_ssidlen );		
++			}
++		}
++
++		
++		attr_contentlen = 0;
++		if ( rtw_get_p2p_attr_content( p2p_ie, p2p_ielen, P2P_ATTR_INTENTED_IF_ADDR, pwdinfo->p2p_peer_interface_addr, &attr_contentlen ) )
++		{
++			if ( attr_contentlen != ETH_ALEN )
++			{
++				_rtw_memset( pwdinfo->p2p_peer_interface_addr, 0x00, ETH_ALEN );
++			}
++		}
++
++		if ( rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_CH_LIST, ch_content, &ch_cnt) )
++		{
++			peer_ch_num = rtw_p2p_get_peer_ch_list(pwdinfo, ch_content, ch_cnt, peer_ch_list);
++			ch_num_inclusioned = rtw_p2p_ch_inclusion(&padapter->mlmeextpriv, peer_ch_list, peer_ch_num, ch_list_inclusioned);
++
++			if( ch_num_inclusioned == 0)
++			{
++				DBG_871X( "[%s] No common channel in channel list!\n", __FUNCTION__ );
++				result = P2P_STATUS_FAIL_NO_COMMON_CH;
++				rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_FAIL);
++				break;
++			}
++
++			if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO))
++			{
++				if ( !rtw_p2p_is_channel_list_ok( pwdinfo->operating_channel, 
++												ch_list_inclusioned, ch_num_inclusioned) )
++				{
++#ifdef CONFIG_CONCURRENT_MODE
++					if ( check_buddy_fwstate(padapter, _FW_LINKED ) )
++					{
++						DBG_871X( "[%s] desired channel NOT Found!\n", __FUNCTION__ );
++						result = P2P_STATUS_FAIL_NO_COMMON_CH;
++						rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_FAIL);
++						break;
++					}
++					else
++#endif //CONFIG_CONCURRENT_MODE
++					{
++						u8 operatingch_info[5] = { 0x00 }, peer_operating_ch = 0;
++						attr_contentlen = 0;
++
++						if ( rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_OPERATING_CH, operatingch_info, &attr_contentlen) )
++						{		
++							peer_operating_ch = operatingch_info[4];
++						}
++
++						if ( rtw_p2p_is_channel_list_ok( peer_operating_ch, 
++														ch_list_inclusioned, ch_num_inclusioned) )
++						{
++							/**
++							 *	Change our operating channel as peer's for compatibility.
++							 */
++							pwdinfo->operating_channel = peer_operating_ch;
++							DBG_871X( "[%s] Change op ch to %02x as peer's\n", __FUNCTION__, pwdinfo->operating_channel);
++						}
++						else
++						{
++							// Take first channel of ch_list_inclusioned as operating channel
++							pwdinfo->operating_channel = ch_list_inclusioned[0];
++							DBG_871X( "[%s] Change op ch to %02x\n", __FUNCTION__, pwdinfo->operating_channel);
++						}
++					}
++
++				}
++			}
++		}
++
++		//Get the next P2P IE
++		p2p_ie = rtw_get_p2p_ie(p2p_ie+p2p_ielen, ies_len -(p2p_ie -ies + p2p_ielen), NULL, &p2p_ielen);
++	}
++	
++#ifdef CONFIG_WFD
++	//	Added by Albert 20110823
++	//	Try to get the TCP port information when receiving the negotiation request.
++	if ( rtw_get_wfd_ie( pframe + _PUBLIC_ACTION_IE_OFFSET_, len - _PUBLIC_ACTION_IE_OFFSET_, wfd_ie, &wfd_ielen ) )
++	{
++		u8	attr_content[ 10 ] = { 0x00 };
++		u32	attr_contentlen = 0;
++
++		DBG_871X( "[%s] WFD IE Found!!\n", __FUNCTION__ );
++		rtw_get_wfd_attr_content( wfd_ie, wfd_ielen, WFD_ATTR_DEVICE_INFO, attr_content, &attr_contentlen);
++		if ( attr_contentlen )
++		{
++			pwdinfo->wfd_info->peer_rtsp_ctrlport = RTW_GET_BE16( attr_content + 2 );
++			DBG_871X( "[%s] Peer PORT NUM = %d\n", __FUNCTION__, pwdinfo->wfd_info->peer_rtsp_ctrlport );
++		}
++	}
++#endif // CONFIG_WFD
++
++	return( result );
++}
++
++u8 process_p2p_group_negotation_resp( struct wifidirect_info *pwdinfo, u8 *pframe, uint len )
++{
++	_adapter *padapter = pwdinfo->padapter;
++	u8	result = P2P_STATUS_SUCCESS;
++	u32	p2p_ielen, wps_ielen;
++	u8 * ies;
++	u32 ies_len;
++	u8 * p2p_ie;
++#ifdef CONFIG_WFD
++	u8	wfd_ie[ 128 ] = { 0x00 };
++	u32	wfd_ielen = 0;
++#ifdef CONFIG_TDLS
++	struct tdls_info *ptdlsinfo = &padapter->tdlsinfo;
++#endif // CONFIG_TDLS	
++#endif // CONFIG_WFD	
++
++	ies = pframe + _PUBLIC_ACTION_IE_OFFSET_;
++	ies_len = len - _PUBLIC_ACTION_IE_OFFSET_;
++
++	//	Be able to know which one is the P2P GO and which one is P2P client.
++					
++	if ( rtw_get_wps_ie( ies, ies_len, NULL, &wps_ielen) )
++	{
++
++	}
++	else
++	{
++		DBG_871X( "[%s] WPS IE not Found!!\n", __FUNCTION__ );
++		result = P2P_STATUS_FAIL_INCOMPATIBLE_PARAM;
++		rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_FAIL);
++	}
++
++	p2p_ie = rtw_get_p2p_ie( ies, ies_len, NULL, &p2p_ielen );
++	if ( !p2p_ie )
++	{
++		rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE);
++		rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_FAIL);
++		result = P2P_STATUS_FAIL_INCOMPATIBLE_PARAM;
++	}
++	else
++	{
++
++		u8	attr_content = 0x00;
++		u32	attr_contentlen = 0;
++		u8	operatingch_info[5] = { 0x00 };
++		uint	ch_cnt = 0;
++		u8	ch_content[100] = { 0x00 };
++		u8	groupid[ 38 ];
++		u16	cap_attr;
++		u8	peer_ch_list[100] = { 0x00 };
++		u8	peer_ch_num = 0;
++		u8	ch_list_inclusioned[100] = { 0x00 };
++		u8	ch_num_inclusioned = 0;
++
++		while ( p2p_ie )	//	Found the P2P IE.
++		{
++
++			//Check P2P Capability ATTR
++			if(rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_CAPABILITY, (u8*)&cap_attr, (uint*)&attr_contentlen) )
++			{
++				cap_attr = le16_to_cpu(cap_attr);
++#if defined(CONFIG_WFD) && defined(CONFIG_TDLS)
++			if(!(cap_attr & P2P_GRPCAP_INTRABSS) )
++				ptdlsinfo->ap_prohibited = _TRUE;
++#endif //defined(CONFIG_WFD) && defined(CONFIG_TDLS)
++			}
++
++			rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_STATUS, &attr_content, &attr_contentlen);
++			if ( attr_contentlen == 1 )
++			{			
++				DBG_871X( "[%s] Status = %d\n", __FUNCTION__, attr_content );
++				if ( attr_content == P2P_STATUS_SUCCESS )
++				{
++					//	Do nothing.
++				}
++				else
++				{
++					if ( P2P_STATUS_FAIL_INFO_UNAVAILABLE == attr_content ) {
++						rtw_p2p_set_state(pwdinfo, P2P_STATE_RX_INFOR_NOREADY);
++					} else {
++						rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_FAIL);
++					}
++					rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE);
++					result = attr_content;
++					break;
++				}
++			}
++
++			//	Try to get the peer's interface address
++			attr_contentlen = 0;
++			if ( rtw_get_p2p_attr_content( p2p_ie, p2p_ielen, P2P_ATTR_INTENTED_IF_ADDR, pwdinfo->p2p_peer_interface_addr, &attr_contentlen ) )
++			{
++				if ( attr_contentlen != ETH_ALEN )
++				{
++					_rtw_memset( pwdinfo->p2p_peer_interface_addr, 0x00, ETH_ALEN );
++				}
++			}
++			
++			//	Try to get the peer's intent and tie breaker value.
++			attr_content = 0x00;
++			attr_contentlen = 0;
++			if ( rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_GO_INTENT , &attr_content, &attr_contentlen) )
++			{
++				DBG_871X( "[%s] GO Intent = %d, tie = %d\n", __FUNCTION__, attr_content >> 1, attr_content & 0x01 );
++				pwdinfo->peer_intent = attr_content;	//	include both intent and tie breaker values.
++
++				if ( pwdinfo->intent == ( pwdinfo->peer_intent >> 1 ) )
++				{
++					//	Try to match the tie breaker value
++					if ( pwdinfo->intent == P2P_MAX_INTENT )
++					{
++						rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE);
++						result = P2P_STATUS_FAIL_BOTH_GOINTENT_15;
++						rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_FAIL);
++					}
++					else
++					{
++						rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_OK);
++						rtw_p2p_set_pre_state(pwdinfo, P2P_STATE_GONEGO_OK);
++						if ( attr_content & 0x01 )
++						{
++							rtw_p2p_set_role(pwdinfo, P2P_ROLE_CLIENT);
++						}
++						else
++						{
++							rtw_p2p_set_role(pwdinfo, P2P_ROLE_GO);
++						}
++					}							
++				}
++				else if ( pwdinfo->intent > ( pwdinfo->peer_intent >> 1 ) )
++				{
++					rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_OK);
++					rtw_p2p_set_pre_state(pwdinfo, P2P_STATE_GONEGO_OK);
++					rtw_p2p_set_role(pwdinfo, P2P_ROLE_GO);
++				}
++				else
++				{
++					rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_OK);
++					rtw_p2p_set_pre_state(pwdinfo, P2P_STATE_GONEGO_OK);
++					rtw_p2p_set_role(pwdinfo, P2P_ROLE_CLIENT);
++				}
++
++				if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO))
++				{
++					//	Store the group id information.
++					_rtw_memcpy( pwdinfo->groupid_info.go_device_addr, pwdinfo->device_addr, ETH_ALEN );
++					_rtw_memcpy( pwdinfo->groupid_info.ssid, pwdinfo->nego_ssid, pwdinfo->nego_ssidlen );
++		
++				}
++			}
++			
++			//	Try to get the operation channel information
++					
++			attr_contentlen = 0;
++			if ( rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_OPERATING_CH, operatingch_info, &attr_contentlen))
++			{
++				DBG_871X( "[%s] Peer's operating channel = %d\n", __FUNCTION__, operatingch_info[4] );
++				pwdinfo->peer_operating_ch = operatingch_info[4];
++			}
++			
++			//	Try to get the channel list information
++			if ( rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_CH_LIST, pwdinfo->channel_list_attr, &pwdinfo->channel_list_attr_len ) )
++			{
++				DBG_871X( "[%s] channel list attribute found, len = %d\n", __FUNCTION__,  pwdinfo->channel_list_attr_len );
++
++				peer_ch_num = rtw_p2p_get_peer_ch_list(pwdinfo, pwdinfo->channel_list_attr, pwdinfo->channel_list_attr_len, peer_ch_list);
++				ch_num_inclusioned = rtw_p2p_ch_inclusion(&padapter->mlmeextpriv, peer_ch_list, peer_ch_num, ch_list_inclusioned);
++
++				if( ch_num_inclusioned == 0)
++				{
++					DBG_871X( "[%s] No common channel in channel list!\n", __FUNCTION__ );
++					result = P2P_STATUS_FAIL_NO_COMMON_CH;
++					rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_FAIL);
++					break;
++				}
++
++				if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO))
++				{
++					if ( !rtw_p2p_is_channel_list_ok( pwdinfo->operating_channel, 
++													ch_list_inclusioned, ch_num_inclusioned) )
++					{
++#ifdef CONFIG_CONCURRENT_MODE
++						if ( check_buddy_fwstate(padapter, _FW_LINKED ) )
++						{
++							DBG_871X( "[%s] desired channel NOT Found!\n", __FUNCTION__ );
++							result = P2P_STATUS_FAIL_NO_COMMON_CH;
++							rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_FAIL);
++							break;
++						}
++						else
++#endif //CONFIG_CONCURRENT_MODE
++						{
++							u8 operatingch_info[5] = { 0x00 }, peer_operating_ch = 0;
++							attr_contentlen = 0;
++
++							if ( rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_OPERATING_CH, operatingch_info, &attr_contentlen) )
++							{		
++								peer_operating_ch = operatingch_info[4];
++							}
++
++							if ( rtw_p2p_is_channel_list_ok( peer_operating_ch, 
++															ch_list_inclusioned, ch_num_inclusioned) )
++							{
++								/**
++								 *	Change our operating channel as peer's for compatibility.
++								 */
++								pwdinfo->operating_channel = peer_operating_ch;
++								DBG_871X( "[%s] Change op ch to %02x as peer's\n", __FUNCTION__, pwdinfo->operating_channel);
++							}
++							else
++							{
++								// Take first channel of ch_list_inclusioned as operating channel
++								pwdinfo->operating_channel = ch_list_inclusioned[0];
++								DBG_871X( "[%s] Change op ch to %02x\n", __FUNCTION__, pwdinfo->operating_channel);
++							}
++						}
++
++					}
++				}
++
++			}
++			else
++			{
++				DBG_871X( "[%s] channel list attribute not found!\n", __FUNCTION__);
++			}
++
++			//	Try to get the group id information if peer is GO
++			attr_contentlen = 0;
++			_rtw_memset( groupid, 0x00, 38 );
++			if ( rtw_get_p2p_attr_content( p2p_ie, p2p_ielen, P2P_ATTR_GROUP_ID, groupid, &attr_contentlen) )
++			{
++				_rtw_memcpy( pwdinfo->groupid_info.go_device_addr, &groupid[0], ETH_ALEN );
++				_rtw_memcpy( pwdinfo->groupid_info.ssid, &groupid[6], attr_contentlen - ETH_ALEN );
++			}
++			
++			//Get the next P2P IE
++			p2p_ie = rtw_get_p2p_ie(p2p_ie+p2p_ielen, ies_len -(p2p_ie -ies + p2p_ielen), NULL, &p2p_ielen);
++		}
++		
++	}
++
++#ifdef CONFIG_WFD
++	//	Added by Albert 20111122
++	//	Try to get the TCP port information when receiving the negotiation response.
++	if ( rtw_get_wfd_ie( pframe + _PUBLIC_ACTION_IE_OFFSET_, len - _PUBLIC_ACTION_IE_OFFSET_, wfd_ie, &wfd_ielen ) )
++	{
++		u8	attr_content[ 10 ] = { 0x00 };
++		u32	attr_contentlen = 0;
++
++		DBG_8192C( "[%s] WFD IE Found!!\n", __FUNCTION__ );
++		rtw_get_wfd_attr_content( wfd_ie, wfd_ielen, WFD_ATTR_DEVICE_INFO, attr_content, &attr_contentlen);
++		if ( attr_contentlen )
++		{
++			pwdinfo->wfd_info->peer_rtsp_ctrlport = RTW_GET_BE16( attr_content + 2 );
++			DBG_8192C( "[%s] Peer PORT NUM = %d\n", __FUNCTION__, pwdinfo->wfd_info->peer_rtsp_ctrlport );
++		}
++	}
++#endif // CONFIG_WFD
++
++	return( result );
++
++}
++
++u8 process_p2p_group_negotation_confirm( struct wifidirect_info *pwdinfo, u8 *pframe, uint len )
++{
++	u8 * ies;
++	u32 ies_len;
++	u8 * p2p_ie;
++	u32	p2p_ielen = 0;
++	u8	result = P2P_STATUS_SUCCESS;
++	ies = pframe + _PUBLIC_ACTION_IE_OFFSET_;
++	ies_len = len - _PUBLIC_ACTION_IE_OFFSET_;
++
++	p2p_ie = rtw_get_p2p_ie( ies, ies_len, NULL, &p2p_ielen );
++	while ( p2p_ie )	//	Found the P2P IE.
++	{
++		u8	attr_content = 0x00, operatingch_info[5] = { 0x00 };
++		u8	groupid[ 38 ] = { 0x00 };
++		u32	attr_contentlen = 0;
++
++		pwdinfo->negotiation_dialog_token = 1;
++		rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_STATUS, &attr_content, &attr_contentlen);
++		if ( attr_contentlen == 1 )
++		{
++			DBG_871X( "[%s] Status = %d\n", __FUNCTION__, attr_content );
++			result = attr_content;
++
++			if ( attr_content == P2P_STATUS_SUCCESS )
++			{
++				u8	bcancelled = 0;
++																
++				_cancel_timer( &pwdinfo->restore_p2p_state_timer, &bcancelled );
++
++				//	Commented by Albert 20100911
++				//	Todo: Need to handle the case which both Intents are the same.
++				rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_OK);
++				rtw_p2p_set_pre_state(pwdinfo, P2P_STATE_GONEGO_OK);
++				if ( ( pwdinfo->intent ) > ( pwdinfo->peer_intent >> 1 ) )
++				{
++					rtw_p2p_set_role(pwdinfo, P2P_ROLE_GO);
++				}
++				else if ( ( pwdinfo->intent ) < ( pwdinfo->peer_intent >> 1 ) )
++				{
++					rtw_p2p_set_role(pwdinfo, P2P_ROLE_CLIENT);
++				}
++				else
++				{
++					//	Have to compare the Tie Breaker
++					if ( pwdinfo->peer_intent & 0x01 )
++					{
++						rtw_p2p_set_role(pwdinfo, P2P_ROLE_CLIENT);
++					}
++					else
++					{
++						rtw_p2p_set_role(pwdinfo, P2P_ROLE_GO);
++					}
++				}								
++				
++#ifdef CONFIG_CONCURRENT_MODE
++				if ( check_buddy_fwstate(pwdinfo->padapter , _FW_LINKED ) )
++				{
++					//	Switch back to the AP channel soon.
++					_set_timer( &pwdinfo->ap_p2p_switch_timer, 100 );
++				}
++#endif				
++			}
++			else
++			{
++				rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE);
++				rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_FAIL);
++				break;
++			}
++		}
++
++		//	Try to get the group id information
++		attr_contentlen = 0;
++		_rtw_memset( groupid, 0x00, 38 );
++		if ( rtw_get_p2p_attr_content( p2p_ie, p2p_ielen, P2P_ATTR_GROUP_ID, groupid, &attr_contentlen) )
++		{
++			DBG_871X( "[%s] Ssid = %s, ssidlen = %d\n", __FUNCTION__, &groupid[ETH_ALEN], (u32)strlen(&groupid[ETH_ALEN]) );
++			_rtw_memcpy( pwdinfo->groupid_info.go_device_addr, &groupid[0], ETH_ALEN );
++			_rtw_memcpy( pwdinfo->groupid_info.ssid, &groupid[6], attr_contentlen - ETH_ALEN );			
++		}
++
++		attr_contentlen = 0;
++		if ( rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_OPERATING_CH, operatingch_info, &attr_contentlen) )
++		{		
++			DBG_871X( "[%s] Peer's operating channel = %d\n", __FUNCTION__, operatingch_info[4] );
++			pwdinfo->peer_operating_ch = operatingch_info[4];
++		}
++
++		//Get the next P2P IE
++		p2p_ie = rtw_get_p2p_ie(p2p_ie+p2p_ielen, ies_len -(p2p_ie -ies + p2p_ielen), NULL, &p2p_ielen);
++		
++	}
++
++	return( result );
++}
++
++u8 process_p2p_presence_req(struct wifidirect_info *pwdinfo, u8 *pframe, uint len)
++{
++	u8 *frame_body;	
++	u8 dialogToken=0;
++	u8 status = P2P_STATUS_SUCCESS;
++	
++	frame_body = (unsigned char *)(pframe + sizeof(struct rtw_ieee80211_hdr_3addr));
++
++	dialogToken = frame_body[6];
++
++	//todo: check NoA attribute
++
++	issue_p2p_presence_resp(pwdinfo, GetAddr2Ptr(pframe), status, dialogToken);
++
++	return _TRUE;
++}
++
++void find_phase_handler( _adapter*	padapter )
++{
++	struct wifidirect_info  *pwdinfo = &padapter->wdinfo;
++	struct mlme_priv		*pmlmepriv = &padapter->mlmepriv;
++	NDIS_802_11_SSID 	ssid;
++	_irqL				irqL;
++	u8					_status = 0;
++
++_func_enter_;
++
++	_rtw_memset((unsigned char*)&ssid, 0, sizeof(NDIS_802_11_SSID));
++	_rtw_memcpy(ssid.Ssid, pwdinfo->p2p_wildcard_ssid, P2P_WILDCARD_SSID_LEN );
++	ssid.SsidLength = P2P_WILDCARD_SSID_LEN;
++
++	rtw_p2p_set_state(pwdinfo, P2P_STATE_FIND_PHASE_SEARCH);
++		
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++	_status = rtw_sitesurvey_cmd(padapter, &ssid, 1, NULL, 0);
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++
++
++_func_exit_;
++}
++
++void p2p_concurrent_handler(  _adapter* padapter );
++
++void restore_p2p_state_handler( _adapter*	padapter )
++{
++	struct wifidirect_info  *pwdinfo = &padapter->wdinfo;
++	struct mlme_priv		*pmlmepriv = &padapter->mlmepriv;
++
++_func_enter_;
++
++	if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_ING) || rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_FAIL))
++	{
++		rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE);
++	}
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if ( check_buddy_fwstate(padapter, _FW_LINKED ) )
++	{
++		_adapter				*pbuddy_adapter = padapter->pbuddy_adapter;
++		struct mlme_priv		*pbuddy_mlmepriv = &pbuddy_adapter->mlmepriv;
++		struct mlme_ext_priv	*pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;	
++	
++		if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_TX_PROVISION_DIS_REQ) || rtw_p2p_chk_state(pwdinfo, P2P_STATE_RX_PROVISION_DIS_RSP))
++		{
++			set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode);
++			
++			issue_nulldata(pbuddy_adapter, NULL, 0, 3, 500);
++		}
++	}
++#endif
++
++	rtw_p2p_set_state(pwdinfo, rtw_p2p_pre_state(pwdinfo));
++	
++	if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_DEVICE))
++	{
++#ifdef CONFIG_CONCURRENT_MODE
++		p2p_concurrent_handler( padapter );
++#else
++		//	In the P2P client mode, the driver should not switch back to its listen channel
++		//	because this P2P client should stay at the operating channel of P2P GO.
++		set_channel_bwmode( padapter, pwdinfo->listen_channel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
++#endif
++	}
++_func_exit_;
++}
++
++void pre_tx_invitereq_handler( _adapter*	padapter )
++{
++	struct wifidirect_info  *pwdinfo = &padapter->wdinfo;
++	u8	val8 = 1;
++_func_enter_;
++
++	set_channel_bwmode(padapter, pwdinfo->invitereq_info.peer_ch, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
++	rtw_hal_set_hwreg(padapter, HW_VAR_MLME_SITESURVEY, (u8 *)(&val8));	
++	issue_probereq_p2p(padapter, NULL);
++	_set_timer( &pwdinfo->pre_tx_scan_timer, P2P_TX_PRESCAN_TIMEOUT );
++	
++_func_exit_;
++}
++
++void pre_tx_provdisc_handler( _adapter*	padapter )
++{
++	struct wifidirect_info  *pwdinfo = &padapter->wdinfo;
++	u8	val8 = 1;
++_func_enter_;
++
++	set_channel_bwmode(padapter, pwdinfo->tx_prov_disc_info.peer_channel_num[0], HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
++	rtw_hal_set_hwreg(padapter, HW_VAR_MLME_SITESURVEY, (u8 *)(&val8));
++	issue_probereq_p2p(padapter, NULL);
++	_set_timer( &pwdinfo->pre_tx_scan_timer, P2P_TX_PRESCAN_TIMEOUT );
++	
++_func_exit_;
++}
++
++void pre_tx_negoreq_handler( _adapter*	padapter )
++{
++	struct wifidirect_info  *pwdinfo = &padapter->wdinfo;
++	u8	val8 = 1;
++_func_enter_;
++
++	set_channel_bwmode(padapter, pwdinfo->nego_req_info.peer_channel_num[0], HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
++	rtw_hal_set_hwreg(padapter, HW_VAR_MLME_SITESURVEY, (u8 *)(&val8));	
++	issue_probereq_p2p(padapter, NULL);
++	_set_timer( &pwdinfo->pre_tx_scan_timer, P2P_TX_PRESCAN_TIMEOUT );
++	
++_func_exit_;
++}
++
++#ifdef CONFIG_CONCURRENT_MODE
++void p2p_concurrent_handler( _adapter*	padapter )
++{
++	struct wifidirect_info	*pwdinfo = &padapter->wdinfo;
++	//_adapter				*pbuddy_adapter = padapter->pbuddy_adapter;
++	//struct wifidirect_info	*pbuddy_wdinfo = &pbuddy_adapter->wdinfo;
++	//struct mlme_priv		*pbuddy_mlmepriv = &pbuddy_adapter->mlmepriv;
++	//struct mlme_ext_priv	*pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++	u8					val8;
++_func_enter_;
++
++	if ( check_buddy_fwstate(padapter, _FW_LINKED ) )
++	{
++		PADAPTER pbuddy_adapter = padapter->pbuddy_adapter;			
++		struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++
++		pwdinfo->operating_channel = pbuddy_mlmeext->cur_channel;
++
++		if( pwdinfo->driver_interface == DRIVER_CFG80211 )
++		{
++			DBG_871X("%s, switch ch back to buddy's cur_channel=%d\n", __func__, pbuddy_mlmeext->cur_channel);
++
++			set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode);
++		
++			issue_nulldata(pbuddy_adapter, NULL, 0, 3, 500);
++		}
++		else if( pwdinfo->driver_interface == DRIVER_WEXT )
++		{
++			if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_IDLE))
++			{
++				//	Now, the driver stays on the AP's channel.
++				//	If the pwdinfo->ext_listen_period = 0, that means the P2P listen state is not available on listen channel.
++				if ( pwdinfo->ext_listen_period > 0 )
++				{
++					DBG_8192C( "[%s] P2P_STATE_IDLE, ext_listen_period = %d\n", __FUNCTION__, pwdinfo->ext_listen_period );
++
++					if ( pbuddy_mlmeext->cur_channel != pwdinfo->listen_channel )
++					{
++						//	Will switch to listen channel so that need to send the NULL data with PW bit to AP.
++						issue_nulldata(pbuddy_adapter, NULL, 1, 3, 500);
++						set_channel_bwmode(padapter, pwdinfo->listen_channel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
++					}
++
++					rtw_p2p_set_state(pwdinfo, P2P_STATE_LISTEN);
++					val8 = 1;
++					rtw_hal_set_hwreg(padapter, HW_VAR_MLME_SITESURVEY, (u8 *)(&val8));
++
++					//	Todo: To check the value of pwdinfo->ext_listen_period is equal to 0 or not.
++					_set_timer( &pwdinfo->ap_p2p_switch_timer, pwdinfo->ext_listen_period );
++				}
++			}
++			else if ( rtw_p2p_chk_state(pwdinfo, P2P_STATE_LISTEN) || 
++					rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_FAIL) ||
++					( rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_ING) && pwdinfo->nego_req_info.benable == _FALSE ) ||
++					rtw_p2p_chk_state(pwdinfo, P2P_STATE_RX_PROVISION_DIS_REQ) )
++			{
++				//	Now, the driver is in the listen state of P2P mode.
++				DBG_8192C( "[%s] P2P_STATE_IDLE, ext_listen_interval = %d\n", __FUNCTION__, pwdinfo->ext_listen_interval );
++
++				//	Commented by Albert 2012/11/01
++				//	If the AP's channel is the same as the listen channel, we should still be in the listen state
++				//	Other P2P device is still able to find this device out even this device is in the AP's channel.
++				//	So, configure this device to be able to receive the probe request frame and set it to listen state.
++				if ( pbuddy_mlmeext->cur_channel != pwdinfo->listen_channel )
++				{
++					set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode);
++					val8 = 0;
++					padapter->HalFunc.SetHwRegHandler(padapter, HW_VAR_MLME_SITESURVEY, (u8 *)(&val8));
++					rtw_p2p_set_state(pwdinfo, P2P_STATE_IDLE);
++					issue_nulldata(pbuddy_adapter, NULL, 0, 3, 500);
++				}
++
++				//	Todo: To check the value of pwdinfo->ext_listen_interval is equal to 0 or not.
++				_set_timer( &pwdinfo->ap_p2p_switch_timer, pwdinfo->ext_listen_interval );
++			}
++			else if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_OK))
++			{
++				//	The driver had finished the P2P handshake successfully.
++				val8 = 0;
++				rtw_hal_set_hwreg(padapter, HW_VAR_MLME_SITESURVEY, (u8 *)(&val8));
++				set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode);
++				issue_nulldata(pbuddy_adapter, NULL, 0, 3, 500);
++			}
++			else if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_TX_PROVISION_DIS_REQ))
++			{
++				val8 = 1;
++				set_channel_bwmode(padapter, pwdinfo->tx_prov_disc_info.peer_channel_num[0], HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
++				rtw_hal_set_hwreg(padapter, HW_VAR_MLME_SITESURVEY, (u8 *)(&val8));
++				issue_probereq_p2p(padapter, NULL);
++				_set_timer( &pwdinfo->pre_tx_scan_timer, P2P_TX_PRESCAN_TIMEOUT );
++			}
++			else if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_ING) && pwdinfo->nego_req_info.benable == _TRUE)
++			{
++				val8 = 1;
++				set_channel_bwmode(padapter, pwdinfo->nego_req_info.peer_channel_num[0], HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
++				rtw_hal_set_hwreg(padapter, HW_VAR_MLME_SITESURVEY, (u8 *)(&val8));
++				issue_probereq_p2p(padapter, NULL);
++				_set_timer( &pwdinfo->pre_tx_scan_timer, P2P_TX_PRESCAN_TIMEOUT );
++			}		
++			else if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_TX_INVITE_REQ ) && pwdinfo->invitereq_info.benable == _TRUE)
++			{
++				/*
++				val8 = 1;
++				set_channel_bwmode(padapter, , HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
++				rtw_hal_set_hwreg(padapter, HW_VAR_MLME_SITESURVEY, (u8 *)(&val8));
++				issue_probereq_p2p(padapter, NULL);
++				_set_timer( &pwdinfo->pre_tx_scan_timer, P2P_TX_PRESCAN_TIMEOUT );
++				*/
++			}
++		}
++	}	
++	else
++	{
++		set_channel_bwmode( padapter, pwdinfo->listen_channel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);	
++	}
++	
++_func_exit_;
++}
++#endif
++
++#ifdef CONFIG_IOCTL_CFG80211
++static void ro_ch_handler(_adapter *padapter)
++{
++	struct cfg80211_wifidirect_info *pcfg80211_wdinfo = &padapter->cfg80211_wdinfo;
++	struct wifidirect_info *pwdinfo = &padapter->wdinfo;
++	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
++	u8 ch, bw, offset;
++_func_enter_;
++
++	if (rtw_get_ch_setting_union(padapter, &ch, &bw, &offset) != 0) {
++		if (0)
++		DBG_871X(FUNC_ADPT_FMT" back to linked union - ch:%u, bw:%u, offset:%u\n",
++			FUNC_ADPT_ARG(padapter), ch, bw, offset);
++	}
++	else if (wdev_to_priv(padapter->rtw_wdev)->p2p_enabled && pwdinfo->listen_channel) {
++		ch = pwdinfo->listen_channel;
++		bw = HT_CHANNEL_WIDTH_20;
++		offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++		if (0)
++		DBG_871X(FUNC_ADPT_FMT" back to listen ch - ch:%u, bw:%u, offset:%u\n",
++			FUNC_ADPT_ARG(padapter), ch, bw, offset);
++	}
++	else {
++		ch = pcfg80211_wdinfo->restore_channel;
++		bw = HT_CHANNEL_WIDTH_20;
++		offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++		if (0)
++		DBG_871X(FUNC_ADPT_FMT" back to restore ch - ch:%u, bw:%u, offset:%u\n",
++			FUNC_ADPT_ARG(padapter), ch, bw, offset);
++	}
++
++	set_channel_bwmode(padapter, ch, offset, bw);
++
++	rtw_p2p_set_state(pwdinfo, rtw_p2p_pre_state(pwdinfo));
++#ifdef CONFIG_DEBUG_CFG80211
++	DBG_871X("%s, role=%d, p2p_state=%d\n", __func__, rtw_p2p_role(pwdinfo), rtw_p2p_state(pwdinfo));
++#endif
++
++	pcfg80211_wdinfo->is_ro_ch = _FALSE;
++
++	DBG_871X("cfg80211_remain_on_channel_expired\n");
++
++	rtw_cfg80211_remain_on_channel_expired(padapter, 
++		pcfg80211_wdinfo->remain_on_ch_cookie, 
++		&pcfg80211_wdinfo->remain_on_ch_channel,
++		pcfg80211_wdinfo->remain_on_ch_type, GFP_KERNEL);
++
++_func_exit_;
++}
++
++static void ro_ch_timer_process (void *FunctionContext)
++{
++	_adapter *adapter = (_adapter *)FunctionContext;
++	struct rtw_wdev_priv *pwdev_priv = wdev_to_priv(adapter->rtw_wdev);
++
++	//printk("%s \n", __FUNCTION__);
++	
++#ifdef	CONFIG_CONCURRENT_MODE
++	ATOMIC_SET(&pwdev_priv->ro_ch_to, 1);
++#endif
++
++	p2p_protocol_wk_cmd( adapter, P2P_RO_CH_WK);
++}
++
++static void rtw_change_p2pie_op_ch(_adapter *padapter, const u8 *frame_body, u32 len, u8 ch)
++{
++	u8 *ies, *p2p_ie;
++	u32 ies_len, p2p_ielen;
++	PADAPTER pbuddy_adapter = padapter->pbuddy_adapter;
++	struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++
++	ies = (u8*)(frame_body + _PUBLIC_ACTION_IE_OFFSET_);
++	ies_len = len - _PUBLIC_ACTION_IE_OFFSET_;
++
++	p2p_ie = rtw_get_p2p_ie( ies, ies_len, NULL, &p2p_ielen );
++
++	while ( p2p_ie ) {
++		u32	attr_contentlen = 0;
++		u8 *pattr = NULL;
++
++		//Check P2P_ATTR_OPERATING_CH
++		attr_contentlen = 0;
++		pattr = NULL;
++		if((pattr = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_OPERATING_CH, NULL, (uint*)&attr_contentlen))!=NULL)
++		{
++			*(pattr+4) = ch;
++		}
++
++		//Get the next P2P IE
++		p2p_ie = rtw_get_p2p_ie(p2p_ie+p2p_ielen, ies_len -(p2p_ie -ies + p2p_ielen), NULL, &p2p_ielen);
++	}
++}
++
++static void rtw_change_p2pie_ch_list(_adapter *padapter, const u8 *frame_body, u32 len, u8 ch)
++{
++	u8 *ies, *p2p_ie;
++	u32 ies_len, p2p_ielen;
++	PADAPTER pbuddy_adapter = padapter->pbuddy_adapter;
++	struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++
++	ies = (u8*)(frame_body + _PUBLIC_ACTION_IE_OFFSET_);
++	ies_len = len - _PUBLIC_ACTION_IE_OFFSET_;
++
++	p2p_ie = rtw_get_p2p_ie( ies, ies_len, NULL, &p2p_ielen );
++
++	while (p2p_ie) {
++		u32	attr_contentlen = 0;
++		u8 *pattr = NULL;
++
++		//Check P2P_ATTR_CH_LIST
++		if ((pattr=rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_CH_LIST, NULL, (uint*)&attr_contentlen))!=NULL) {
++			int i;
++			u32 num_of_ch;
++			u8 *pattr_temp = pattr + 3 ;
++
++			attr_contentlen -= 3;
++			
++			while (attr_contentlen>0) {
++				num_of_ch = *(pattr_temp+1);
++
++				for(i=0; i<num_of_ch; i++)
++					*(pattr_temp+2+i) = ch;
++
++				pattr_temp += (2+num_of_ch);
++				attr_contentlen -= (2+num_of_ch);
++			}
++		}
++
++		//Get the next P2P IE
++		p2p_ie = rtw_get_p2p_ie(p2p_ie+p2p_ielen, ies_len -(p2p_ie -ies + p2p_ielen), NULL, &p2p_ielen);
++	}
++}
++
++static bool rtw_chk_p2pie_ch_list_with_buddy(_adapter *padapter, const u8 *frame_body, u32 len)
++{
++	bool fit = _FALSE;
++#ifdef CONFIG_CONCURRENT_MODE
++	u8 *ies, *p2p_ie;
++	u32 ies_len, p2p_ielen;
++	PADAPTER pbuddy_adapter = padapter->pbuddy_adapter;
++	struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++	u8 buddy_ch = pbuddy_mlmeext->cur_channel;
++
++	ies = (u8*)(frame_body + _PUBLIC_ACTION_IE_OFFSET_);
++	ies_len = len - _PUBLIC_ACTION_IE_OFFSET_;
++
++	p2p_ie = rtw_get_p2p_ie( ies, ies_len, NULL, &p2p_ielen );
++
++	while (p2p_ie) {
++		u32	attr_contentlen = 0;
++		u8 *pattr = NULL;
++
++		//Check P2P_ATTR_CH_LIST
++		if ((pattr=rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_CH_LIST, NULL, (uint*)&attr_contentlen))!=NULL) {
++			int i;
++			u32 num_of_ch;
++			u8 *pattr_temp = pattr + 3 ;
++
++			attr_contentlen -= 3;
++
++			while (attr_contentlen>0) {
++				num_of_ch = *(pattr_temp+1);
++
++				for(i=0; i<num_of_ch; i++) {
++					if (*(pattr_temp+2+i) == buddy_ch) {
++						DBG_871X(FUNC_ADPT_FMT" ch_list fit buddy_ch:%u\n", FUNC_ADPT_ARG(padapter), buddy_ch);
++						fit = _TRUE;
++						break;
++					}
++				}
++
++				pattr_temp += (2+num_of_ch);
++				attr_contentlen -= (2+num_of_ch);
++			}
++		}
++
++		//Get the next P2P IE
++		p2p_ie = rtw_get_p2p_ie(p2p_ie+p2p_ielen, ies_len -(p2p_ie -ies + p2p_ielen), NULL, &p2p_ielen);
++	}
++#endif
++	return fit;
++}
++
++static bool rtw_chk_p2pie_op_ch_with_buddy(_adapter *padapter, const u8 *frame_body, u32 len)
++{
++	bool fit = _FALSE;
++#ifdef CONFIG_CONCURRENT_MODE
++	u8 *ies, *p2p_ie;
++	u32 ies_len, p2p_ielen;
++	PADAPTER pbuddy_adapter = padapter->pbuddy_adapter;
++	struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++	u8 buddy_ch = pbuddy_mlmeext->cur_channel;
++
++	ies = (u8*)(frame_body + _PUBLIC_ACTION_IE_OFFSET_);
++	ies_len = len - _PUBLIC_ACTION_IE_OFFSET_;
++
++	p2p_ie = rtw_get_p2p_ie( ies, ies_len, NULL, &p2p_ielen );
++
++	while (p2p_ie) {
++		u32	attr_contentlen = 0;
++		u8 *pattr = NULL;
++
++		//Check P2P_ATTR_OPERATING_CH
++		attr_contentlen = 0;
++		pattr = NULL;
++		if((pattr = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_OPERATING_CH, NULL, (uint*)&attr_contentlen))!=NULL) {
++			if (*(pattr+4) == buddy_ch) {
++				DBG_871X(FUNC_ADPT_FMT" op_ch fit buddy_ch:%u\n", FUNC_ADPT_ARG(padapter), buddy_ch);
++				fit = _TRUE;
++				break;
++			}
++		}
++
++		//Get the next P2P IE
++		p2p_ie = rtw_get_p2p_ie(p2p_ie+p2p_ielen, ies_len -(p2p_ie -ies + p2p_ielen), NULL, &p2p_ielen);
++	}
++#endif
++	return fit;
++}
++
++static void rtw_cfg80211_adjust_p2pie_channel(_adapter *padapter, const u8 *frame_body, u32 len)
++{
++#ifdef CONFIG_CONCURRENT_MODE
++	u8 *ies, *p2p_ie;
++	u32 ies_len, p2p_ielen;
++	PADAPTER pbuddy_adapter = padapter->pbuddy_adapter;			
++	struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++
++	ies = (u8*)(frame_body + _PUBLIC_ACTION_IE_OFFSET_);
++	ies_len = len - _PUBLIC_ACTION_IE_OFFSET_;
++					
++	p2p_ie = rtw_get_p2p_ie( ies, ies_len, NULL, &p2p_ielen );
++
++	while ( p2p_ie )
++	{	
++		u32	attr_contentlen = 0;
++		u8 *pattr = NULL;
++				
++		//Check P2P_ATTR_CH_LIST
++		if((pattr=rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_CH_LIST, NULL, (uint*)&attr_contentlen))!=NULL)
++		{
++			int i;
++			u32 num_of_ch;
++			u8 *pattr_temp = pattr + 3 ;
++
++			attr_contentlen -= 3;
++			
++			while(attr_contentlen>0)
++			{				
++				num_of_ch = *(pattr_temp+1);
++								
++				for(i=0; i<num_of_ch; i++)
++					*(pattr_temp+2+i) = pbuddy_mlmeext->cur_channel;//forcing to the same channel
++
++				pattr_temp += (2+num_of_ch);
++				attr_contentlen -= (2+num_of_ch);
++			}	
++		}
++
++		//Check P2P_ATTR_OPERATING_CH
++		attr_contentlen = 0;
++		pattr = NULL;
++		if((pattr = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_OPERATING_CH, NULL, (uint*)&attr_contentlen))!=NULL)
++		{
++			*(pattr+4) = pbuddy_mlmeext->cur_channel;//forcing to the same channel			
++		}
++
++		//Get the next P2P IE
++		p2p_ie = rtw_get_p2p_ie(p2p_ie+p2p_ielen, ies_len -(p2p_ie -ies + p2p_ielen), NULL, &p2p_ielen);
++		
++	}
++
++#endif
++}
++
++#ifdef CONFIG_WFD
++void rtw_append_wfd_ie(_adapter *padapter, u8 *buf, u32* len)
++{
++	unsigned char	*frame_body;
++	u8 category, action, OUI_Subtype, dialogToken=0;
++	u32	wfdielen = 0;
++	struct rtw_wdev_priv *pwdev_priv = wdev_to_priv(padapter->rtw_wdev);
++	
++	frame_body = (unsigned char *)(buf + sizeof(struct rtw_ieee80211_hdr_3addr));	
++	category = frame_body[0];
++
++	if(category == RTW_WLAN_CATEGORY_PUBLIC)
++	{
++		action = frame_body[1];
++		if (action == ACT_PUBLIC_VENDOR
++			&& _rtw_memcmp(frame_body+2, P2P_OUI, 4) == _TRUE
++		)
++		{
++			OUI_Subtype = frame_body[6];
++			dialogToken = frame_body[7];
++			switch( OUI_Subtype )//OUI Subtype
++			{
++				case P2P_GO_NEGO_REQ:
++				{
++					wfdielen = build_nego_req_wfd_ie( &padapter->wdinfo, buf + ( *len ) );
++					(*len) += wfdielen;
++					break;
++				}
++				case P2P_GO_NEGO_RESP:
++				{
++					wfdielen = build_nego_resp_wfd_ie( &padapter->wdinfo, buf + ( *len ) );
++					(*len) += wfdielen;
++					break;
++				}
++				case P2P_GO_NEGO_CONF:
++				{
++					wfdielen = build_nego_confirm_wfd_ie( &padapter->wdinfo, buf + ( *len ) );
++					(*len) += wfdielen;
++					break;
++				}
++				case P2P_INVIT_REQ:
++				{
++					wfdielen = build_invitation_req_wfd_ie( &padapter->wdinfo, buf + ( *len ) );
++					(*len) += wfdielen;
++					break;
++				}
++				case P2P_INVIT_RESP:
++				{
++					wfdielen = build_invitation_resp_wfd_ie( &padapter->wdinfo, buf + ( *len ) );
++					(*len) += wfdielen;
++					break;
++				}
++				case P2P_DEVDISC_REQ:
++					break;
++				case P2P_DEVDISC_RESP:
++
++					break;
++				case P2P_PROVISION_DISC_REQ:
++				{
++					wfdielen = build_provdisc_req_wfd_ie( &padapter->wdinfo, buf + ( *len ) );
++					(*len) += wfdielen;
++					break;
++				}
++				case P2P_PROVISION_DISC_RESP:
++				{
++					wfdielen = build_provdisc_resp_wfd_ie( &padapter->wdinfo, buf + ( *len ) );
++					(*len) += wfdielen;
++					break;
++				}
++				default:
++
++					break;	
++			}
++
++		}
++		
++	}	
++	else if(category == RTW_WLAN_CATEGORY_P2P)
++	{
++		OUI_Subtype = frame_body[5];
++		dialogToken = frame_body[6];
++
++#ifdef CONFIG_DEBUG_CFG80211
++		DBG_871X("ACTION_CATEGORY_P2P: OUI=0x%x, OUI_Subtype=%d, dialogToken=%d\n",
++					cpu_to_be32( *( ( u32* ) ( frame_body + 1 ) ) ), OUI_Subtype, dialogToken);
++#endif
++
++		switch(OUI_Subtype)
++		{
++			case P2P_NOTICE_OF_ABSENCE:
++
++				break;			
++			case P2P_PRESENCE_REQUEST:
++
++				break;			
++			case P2P_PRESENCE_RESPONSE:
++
++				break;			
++			case P2P_GO_DISC_REQUEST:
++
++				break;			
++			default:
++
++				break;			
++		}	
++
++	}	
++	else 
++	{
++		DBG_871X("%s, action frame category=%d\n", __func__, category);
++		//is_p2p_frame = (-1);		
++	}
++
++	return;
++}
++#endif
++
++u8 *dump_p2p_attr_ch_list(u8 *p2p_ie, uint p2p_ielen, u8 *buf, u32 buf_len)
++{
++	uint attr_contentlen = 0;
++	u8 *pattr = NULL;
++	int w_sz = 0;
++	u8 ch_cnt = 0;
++	u8 ch_list[40];
++	bool continuous = _FALSE;
++
++	if ((pattr=rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_CH_LIST, NULL, &attr_contentlen))!=NULL) {
++		int i, j;
++		u32 num_of_ch;
++		u8 *pattr_temp = pattr + 3 ;
++
++		attr_contentlen -= 3;
++
++		_rtw_memset(ch_list, 0, 40);
++
++		while (attr_contentlen>0) {
++			num_of_ch = *(pattr_temp+1);
++							
++			for(i=0; i<num_of_ch; i++) {
++				for (j=0;j<ch_cnt;j++) {
++					if (ch_list[j] == *(pattr_temp+2+i))
++						break;
++				}
++				if (j>=ch_cnt)
++					ch_list[ch_cnt++] = *(pattr_temp+2+i);
++
++			}
++
++			pattr_temp += (2+num_of_ch);
++			attr_contentlen -= (2+num_of_ch);
++		}
++
++		for (j=0;j<ch_cnt;j++) {
++			if (j == 0) {
++				w_sz += snprintf(buf+w_sz, buf_len-w_sz, "%u", ch_list[j]);
++			} else if (ch_list[j] - ch_list[j-1] != 1) {
++				w_sz += snprintf(buf+w_sz, buf_len-w_sz, ", %u", ch_list[j]);
++			} else if (j != ch_cnt-1 && ch_list[j+1] - ch_list[j] == 1) {
++				/* empty */
++			} else {
++				w_sz += snprintf(buf+w_sz, buf_len-w_sz, "-%u", ch_list[j]);
++			}
++		}
++	}
++	return buf;
++}
++
++/*
++ * return _TRUE if requester is GO, _FALSE if responder is GO
++ */
++bool rtw_p2p_nego_intent_compare(u8 req, u8 resp)
++{
++	if (req>>1 == resp >>1)
++		return  req&0x01 ? _TRUE : _FALSE;
++	else if (req>>1 > resp>>1)
++		return _TRUE;
++	else
++		return _FALSE;
++}
++
++int rtw_p2p_check_frames(_adapter *padapter, const u8 *buf, u32 len, u8 tx)
++{
++	int is_p2p_frame = (-1);
++	unsigned char	*frame_body;
++	u8 category, action, OUI_Subtype, dialogToken=0;
++	u8 *p2p_ie = NULL;
++	uint p2p_ielen = 0;
++	struct rtw_wdev_priv *pwdev_priv = wdev_to_priv(padapter->rtw_wdev);
++	int status = -1;
++	u8 ch_list_buf[128] = {'\0'};
++	int op_ch = -1;
++	int listen_ch = -1;
++	u8 intent = 0;
++	
++	frame_body = (unsigned char *)(buf + sizeof(struct rtw_ieee80211_hdr_3addr));	
++	category = frame_body[0];
++	//just for check
++	if(category == RTW_WLAN_CATEGORY_PUBLIC)
++	{
++		action = frame_body[1];
++		if (action == ACT_PUBLIC_VENDOR
++			&& _rtw_memcmp(frame_body+2, P2P_OUI, 4) == _TRUE
++		)
++		{
++			OUI_Subtype = frame_body[6];
++			dialogToken = frame_body[7];
++			is_p2p_frame = OUI_Subtype;
++			#ifdef CONFIG_DEBUG_CFG80211
++			DBG_871X("ACTION_CATEGORY_PUBLIC: ACT_PUBLIC_VENDOR, OUI=0x%x, OUI_Subtype=%d, dialogToken=%d\n",
++				cpu_to_be32( *( ( u32* ) ( frame_body + 2 ) ) ), OUI_Subtype, dialogToken);
++			#endif
++
++			p2p_ie = rtw_get_p2p_ie(
++				(u8 *)buf+sizeof(struct rtw_ieee80211_hdr_3addr)+_PUBLIC_ACTION_IE_OFFSET_,
++				len-sizeof(struct rtw_ieee80211_hdr_3addr)-_PUBLIC_ACTION_IE_OFFSET_,
++				NULL, &p2p_ielen);
++
++			switch( OUI_Subtype )//OUI Subtype
++			{
++				u8 *cont;
++				uint cont_len;
++				case P2P_GO_NEGO_REQ:
++				{
++					struct rtw_wdev_nego_info* nego_info = &pwdev_priv->nego_info;
++
++					if (tx) {
++						#ifdef CONFIG_DRV_ISSUE_PROV_REQ // IOT FOR S2
++						if(pwdev_priv->provdisc_req_issued == _FALSE) {
++							rtw_cfg80211_issue_p2p_provision_request(padapter, buf, len);
++							pwdev_priv->provdisc_req_issued = _TRUE;
++							rtw_msleep_os(200);
++						}
++						#endif //CONFIG_DRV_ISSUE_PROV_REQ
++
++						#ifdef CONFIG_CONCURRENT_MODE
++						if(check_buddy_fwstate(padapter, _FW_LINKED))
++							rtw_cfg80211_adjust_p2pie_channel(padapter, frame_body, len-sizeof(struct rtw_ieee80211_hdr_3addr));
++						#endif
++					}
++
++					if ((cont = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_OPERATING_CH, NULL, &cont_len)))
++						op_ch = *(cont+4);
++					if ((cont = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_LISTEN_CH, NULL, &cont_len)))
++						listen_ch = *(cont+4);
++					if ((cont = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_GO_INTENT, NULL, &cont_len)))
++						intent = *cont;
++
++					if (nego_info->token != dialogToken)
++						rtw_wdev_nego_info_init(nego_info);
++
++					_rtw_memcpy(nego_info->peer_mac, tx ? GetAddr1Ptr(buf) : GetAddr2Ptr(buf), ETH_ALEN);
++					nego_info->active = tx ? 1 : 0;
++					nego_info->token = dialogToken;
++					nego_info->req_op_ch = op_ch;
++					nego_info->req_listen_ch = listen_ch;
++					nego_info->req_intent = intent;
++					nego_info->state = 0;
++
++					dump_p2p_attr_ch_list(p2p_ie, p2p_ielen, ch_list_buf, 128);
++					DBG_871X("RTW_%s:P2P_GO_NEGO_REQ, dialogToken=%d, intent:%u%s, listen_ch:%d, op_ch:%d, ch_list:%s\n",
++							(tx==_TRUE)?"Tx":"Rx", dialogToken, (intent>>1), intent&0x1 ? "+" : "-", listen_ch, op_ch, ch_list_buf);
++
++					if (!tx) {
++						#ifdef CONFIG_CONCURRENT_MODE
++						if(check_buddy_fwstate(padapter, _FW_LINKED)
++							&& rtw_chk_p2pie_ch_list_with_buddy(padapter, frame_body, len-sizeof(struct rtw_ieee80211_hdr_3addr)) == _FALSE)
++						{
++							DBG_871X(FUNC_ADPT_FMT" ch_list has no intersect with buddy\n", FUNC_ADPT_ARG(padapter));
++							rtw_change_p2pie_ch_list(padapter, frame_body, len-sizeof(struct rtw_ieee80211_hdr_3addr), 0);
++						}
++						#endif
++					}
++
++					break;
++				}
++				case P2P_GO_NEGO_RESP:
++				{
++					struct rtw_wdev_nego_info* nego_info = &pwdev_priv->nego_info;
++
++					if (tx) {
++						#ifdef CONFIG_CONCURRENT_MODE
++						if(check_buddy_fwstate(padapter, _FW_LINKED))
++							rtw_cfg80211_adjust_p2pie_channel(padapter, frame_body, len-sizeof(struct rtw_ieee80211_hdr_3addr));
++						#endif
++					}
++
++					if ((cont = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_OPERATING_CH, NULL, &cont_len)))
++						op_ch = *(cont+4);
++					if ((cont = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_GO_INTENT, NULL, &cont_len)))
++						intent = *cont;
++					if ((cont = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_STATUS, NULL, &cont_len)))
++						status = *cont;
++
++					if (nego_info->token == dialogToken && nego_info->state == 0
++						&& _rtw_memcmp(nego_info->peer_mac, tx ? GetAddr1Ptr(buf) : GetAddr2Ptr(buf), ETH_ALEN) == _TRUE
++					) {
++						nego_info->status = (status==-1) ? 0xff : status;
++						nego_info->rsp_op_ch= op_ch;
++						nego_info->rsp_intent = intent;
++						nego_info->state = 1;
++						if (status != 0)
++							nego_info->token = 0; /* init */
++					}
++
++					dump_p2p_attr_ch_list(p2p_ie, p2p_ielen, ch_list_buf, 128);
++					DBG_871X("RTW_%s:P2P_GO_NEGO_RESP, dialogToken=%d, intent:%u%s, status:%d, op_ch:%d, ch_list:%s\n",
++							(tx==_TRUE)?"Tx":"Rx", dialogToken, (intent>>1), intent&0x1 ? "+" : "-", status, op_ch, ch_list_buf);
++
++					if (!tx) {
++						pwdev_priv->provdisc_req_issued = _FALSE;
++						#ifdef CONFIG_CONCURRENT_MODE
++						if(check_buddy_fwstate(padapter, _FW_LINKED)
++							&& rtw_chk_p2pie_ch_list_with_buddy(padapter, frame_body, len-sizeof(struct rtw_ieee80211_hdr_3addr)) == _FALSE)
++						{
++							DBG_871X(FUNC_ADPT_FMT" ch_list has no intersect with buddy\n", FUNC_ADPT_ARG(padapter));
++							rtw_change_p2pie_ch_list(padapter, frame_body, len-sizeof(struct rtw_ieee80211_hdr_3addr), 0);
++						}
++						#endif
++					}
++
++					break;
++				}
++				case P2P_GO_NEGO_CONF:
++				{
++					struct rtw_wdev_nego_info* nego_info = &pwdev_priv->nego_info;
++					bool is_go = _FALSE;
++
++					if (tx) {
++						#ifdef CONFIG_CONCURRENT_MODE
++						if(check_buddy_fwstate(padapter, _FW_LINKED))
++							rtw_cfg80211_adjust_p2pie_channel(padapter, frame_body, len-sizeof(struct rtw_ieee80211_hdr_3addr));
++						#endif
++					}
++
++					if ((cont = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_OPERATING_CH, NULL, &cont_len)))
++						op_ch = *(cont+4);
++					if ((cont = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_STATUS, NULL, &cont_len)))
++						status = *cont;
++
++					if (nego_info->token == dialogToken && nego_info->state == 1
++						&& _rtw_memcmp(nego_info->peer_mac, tx ? GetAddr1Ptr(buf) : GetAddr2Ptr(buf), ETH_ALEN) == _TRUE
++					) {
++						nego_info->status = (status==-1) ? 0xff : status;
++						nego_info->conf_op_ch = (op_ch==-1) ? 0 : op_ch;
++						nego_info->state = 2;
++
++						if (status == 0) {
++							if (rtw_p2p_nego_intent_compare(nego_info->req_intent, nego_info->rsp_intent) && tx)
++								is_go = _TRUE;
++						}
++
++						nego_info->token = 0; /* init */
++					}
++
++					dump_p2p_attr_ch_list(p2p_ie, p2p_ielen, ch_list_buf, 128);
++					DBG_871X("RTW_%s:P2P_GO_NEGO_CONF, dialogToken=%d, status:%d, op_ch:%d, ch_list:%s\n",
++						(tx==_TRUE)?"Tx":"Rx", dialogToken, status, op_ch, ch_list_buf);
++
++					if (!tx) {
++					}
++
++					break;
++				}
++				case P2P_INVIT_REQ:
++				{
++					struct rtw_wdev_invit_info* invit_info = &pwdev_priv->invit_info;
++					int flags = -1;
++
++					if (tx) {
++						#ifdef CONFIG_CONCURRENT_MODE
++						if(check_buddy_fwstate(padapter, _FW_LINKED))
++							rtw_cfg80211_adjust_p2pie_channel(padapter, frame_body, len-sizeof(struct rtw_ieee80211_hdr_3addr));
++						#endif
++					}
++
++					if ((cont = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_INVITATION_FLAGS, NULL, &cont_len)))
++						flags = *cont;
++					if ((cont = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_OPERATING_CH, NULL, &cont_len)))
++						op_ch = *(cont+4);
++
++					if (invit_info->token != dialogToken)
++						rtw_wdev_invit_info_init(invit_info);
++
++					_rtw_memcpy(invit_info->peer_mac, tx ? GetAddr1Ptr(buf) : GetAddr2Ptr(buf), ETH_ALEN);
++					invit_info->active = tx ? 1 : 0;
++					invit_info->token = dialogToken;
++					invit_info->flags = (flags==-1) ? 0x0 : flags;
++					invit_info->req_op_ch= op_ch;
++					invit_info->state = 0;
++
++					dump_p2p_attr_ch_list(p2p_ie, p2p_ielen, ch_list_buf, 128);
++					DBG_871X("RTW_%s:P2P_INVIT_REQ, dialogToken=%d, flags:0x%02x, op_ch:%d, ch_list:%s\n",
++							(tx==_TRUE)?"Tx":"Rx", dialogToken, flags, op_ch, ch_list_buf);
++
++					if (!tx) {
++						#ifdef CONFIG_CONCURRENT_MODE
++						if(check_buddy_fwstate(padapter, _FW_LINKED)) {
++							if (op_ch != -1 && rtw_chk_p2pie_op_ch_with_buddy(padapter, frame_body, len-sizeof(struct rtw_ieee80211_hdr_3addr)) == _FALSE) {
++								DBG_871X(FUNC_ADPT_FMT" op_ch:%u has no intersect with buddy\n", FUNC_ADPT_ARG(padapter), op_ch);
++								rtw_change_p2pie_ch_list(padapter, frame_body, len-sizeof(struct rtw_ieee80211_hdr_3addr), 0);
++							} else if (rtw_chk_p2pie_ch_list_with_buddy(padapter, frame_body, len-sizeof(struct rtw_ieee80211_hdr_3addr)) == _FALSE) {
++								DBG_871X(FUNC_ADPT_FMT" ch_list has no intersect with buddy\n", FUNC_ADPT_ARG(padapter));
++								rtw_change_p2pie_ch_list(padapter, frame_body, len-sizeof(struct rtw_ieee80211_hdr_3addr), 0);
++							}
++						}
++						#endif
++					}
++
++					break;
++				}
++				case P2P_INVIT_RESP:
++				{
++					struct rtw_wdev_invit_info* invit_info = &pwdev_priv->invit_info;
++
++					if (tx) {
++						#ifdef CONFIG_CONCURRENT_MODE
++						if(check_buddy_fwstate(padapter, _FW_LINKED))
++							rtw_cfg80211_adjust_p2pie_channel(padapter, frame_body, len-sizeof(struct rtw_ieee80211_hdr_3addr));
++						#endif
++					}
++
++					if ((cont = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_STATUS, NULL, &cont_len)))
++					{
++#ifdef CONFIG_P2P_INVITE_IOT
++						if(tx && *cont==7)
++						{
++							DBG_871X("TX_P2P_INVITE_RESP, status is no common channel, change to unknown group\n");
++							*cont = 8; //unknow group status
++						}
++#endif //CONFIG_P2P_INVITE_IOT
++						status = *cont;
++					}	
++					if ((cont = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_OPERATING_CH, NULL, &cont_len)))
++						op_ch = *(cont+4);
++
++					if (invit_info->token == dialogToken && invit_info->state == 0
++						&& _rtw_memcmp(invit_info->peer_mac, tx ? GetAddr1Ptr(buf) : GetAddr2Ptr(buf), ETH_ALEN) == _TRUE
++					) {
++						invit_info->status = (status==-1) ? 0xff : status;
++						invit_info->rsp_op_ch= op_ch;
++						invit_info->state = 1;
++						invit_info->token = 0; /* init */
++					}
++
++					dump_p2p_attr_ch_list(p2p_ie, p2p_ielen, ch_list_buf, 128);
++					DBG_871X("RTW_%s:P2P_INVIT_RESP, dialogToken=%d, status:%d, op_ch:%d, ch_list:%s\n",
++							(tx==_TRUE)?"Tx":"Rx", dialogToken, status, op_ch, ch_list_buf);
++
++					if (!tx) {
++					}
++
++					break;
++				}
++				case P2P_DEVDISC_REQ:
++					DBG_871X("RTW_%s:P2P_DEVDISC_REQ, dialogToken=%d\n", (tx==_TRUE)?"Tx":"Rx", dialogToken);
++					break;
++				case P2P_DEVDISC_RESP:
++					cont = rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_STATUS, NULL, &cont_len);
++					DBG_871X("RTW_%s:P2P_DEVDISC_RESP, dialogToken=%d, status:%d\n", (tx==_TRUE)?"Tx":"Rx", dialogToken, cont?*cont:-1);
++					break;
++				case P2P_PROVISION_DISC_REQ:
++				{
++					size_t frame_body_len = len - sizeof(struct rtw_ieee80211_hdr_3addr);
++					u8 *p2p_ie;
++					uint p2p_ielen = 0;
++					uint contentlen = 0;
++					
++					DBG_871X("RTW_%s:P2P_PROVISION_DISC_REQ, dialogToken=%d\n", (tx==_TRUE)?"Tx":"Rx", dialogToken);
++
++					//if(tx)
++					{
++						pwdev_priv->provdisc_req_issued = _FALSE;
++					
++						if( (p2p_ie=rtw_get_p2p_ie( frame_body + _PUBLIC_ACTION_IE_OFFSET_, frame_body_len - _PUBLIC_ACTION_IE_OFFSET_, NULL, &p2p_ielen)))
++						{	
++
++							if(rtw_get_p2p_attr_content( p2p_ie, p2p_ielen, P2P_ATTR_GROUP_ID, NULL, &contentlen))
++							{
++								pwdev_priv->provdisc_req_issued = _FALSE;//case: p2p_client join p2p GO
++							}
++							else
++							{
++								#ifdef CONFIG_DEBUG_CFG80211
++								DBG_871X("provdisc_req_issued is _TRUE\n");
++								#endif //CONFIG_DEBUG_CFG80211
++								pwdev_priv->provdisc_req_issued = _TRUE;//case: p2p_devices connection before Nego req.
++							}
++												
++						}						
++					}				
++				}	
++					break;
++				case P2P_PROVISION_DISC_RESP:
++					DBG_871X("RTW_%s:P2P_PROVISION_DISC_RESP, dialogToken=%d\n", (tx==_TRUE)?"Tx":"Rx", dialogToken);
++					break;
++				default:
++					DBG_871X("RTW_%s:OUI_Subtype=%d, dialogToken=%d\n", (tx==_TRUE)?"Tx":"Rx", OUI_Subtype, dialogToken);
++					break;	
++			}
++
++		}
++		
++	}	
++	else if(category == RTW_WLAN_CATEGORY_P2P)
++	{
++		OUI_Subtype = frame_body[5];
++		dialogToken = frame_body[6];
++
++		#ifdef CONFIG_DEBUG_CFG80211
++		DBG_871X("ACTION_CATEGORY_P2P: OUI=0x%x, OUI_Subtype=%d, dialogToken=%d\n",
++			cpu_to_be32( *( ( u32* ) ( frame_body + 1 ) ) ), OUI_Subtype, dialogToken);
++		#endif
++
++		is_p2p_frame = OUI_Subtype;
++
++		switch(OUI_Subtype)
++		{
++			case P2P_NOTICE_OF_ABSENCE:
++				DBG_871X("RTW_%s:P2P_NOTICE_OF_ABSENCE, dialogToken=%d\n", (tx==_TRUE)?"TX":"RX", dialogToken);
++				break;			
++			case P2P_PRESENCE_REQUEST:
++				DBG_871X("RTW_%s:P2P_PRESENCE_REQUEST, dialogToken=%d\n", (tx==_TRUE)?"TX":"RX", dialogToken);
++				break;			
++			case P2P_PRESENCE_RESPONSE:
++				DBG_871X("RTW_%s:P2P_PRESENCE_RESPONSE, dialogToken=%d\n", (tx==_TRUE)?"TX":"RX", dialogToken);
++				break;			
++			case P2P_GO_DISC_REQUEST:
++				DBG_871X("RTW_%s:P2P_GO_DISC_REQUEST, dialogToken=%d\n", (tx==_TRUE)?"TX":"RX", dialogToken);
++				break;			
++			default:
++				DBG_871X("RTW_%s:OUI_Subtype=%d, dialogToken=%d\n", (tx==_TRUE)?"TX":"RX", OUI_Subtype, dialogToken);
++				break;			
++		}	
++
++	}	
++	else
++	{
++		DBG_871X("RTW_%s:action frame category=%d\n", (tx==_TRUE)?"TX":"RX", category);
++	}
++
++	return is_p2p_frame;
++}
++
++void rtw_init_cfg80211_wifidirect_info( _adapter*	padapter)
++{
++	struct cfg80211_wifidirect_info *pcfg80211_wdinfo = &padapter->cfg80211_wdinfo;
++
++	_rtw_memset(pcfg80211_wdinfo, 0x00, sizeof(struct cfg80211_wifidirect_info) );
++	
++	_init_timer( &pcfg80211_wdinfo->remain_on_ch_timer, padapter->pnetdev, ro_ch_timer_process, padapter );
++}
++#endif //CONFIG_IOCTL_CFG80211	
++
++void p2p_protocol_wk_hdl(_adapter *padapter, int intCmdType)
++{
++	struct wifidirect_info	*pwdinfo= &(padapter->wdinfo);
++	
++_func_enter_;
++
++	switch(intCmdType)
++	{
++		case P2P_FIND_PHASE_WK:
++		{
++			find_phase_handler( padapter );
++			break;
++		}
++		case P2P_RESTORE_STATE_WK:
++		{
++			restore_p2p_state_handler( padapter );
++			break;
++		}
++		case P2P_PRE_TX_PROVDISC_PROCESS_WK:
++		{
++#ifdef CONFIG_CONCURRENT_MODE
++			if ( check_buddy_fwstate(padapter, _FW_LINKED ) )
++			{
++				p2p_concurrent_handler( padapter );
++			}
++			else
++			{
++				pre_tx_provdisc_handler( padapter );
++			}
++#else
++			pre_tx_provdisc_handler( padapter );
++#endif
++			break;
++		}
++		case P2P_PRE_TX_INVITEREQ_PROCESS_WK:
++		{
++#ifdef CONFIG_CONCURRENT_MODE
++			if ( check_buddy_fwstate(padapter, _FW_LINKED ) )
++			{
++				p2p_concurrent_handler( padapter );
++			}
++			else
++			{
++				pre_tx_invitereq_handler( padapter );
++			}
++#else			
++			pre_tx_invitereq_handler( padapter );
++#endif
++			break;
++		}		
++		case P2P_PRE_TX_NEGOREQ_PROCESS_WK:
++		{
++#ifdef CONFIG_CONCURRENT_MODE
++			if ( check_buddy_fwstate(padapter, _FW_LINKED ) )
++			{
++				p2p_concurrent_handler( padapter );
++			}
++			else
++			{
++				pre_tx_negoreq_handler( padapter );
++			}
++#else			
++			pre_tx_negoreq_handler( padapter );
++#endif
++			break;
++		}
++#ifdef CONFIG_P2P
++#ifdef CONFIG_CONCURRENT_MODE
++		case P2P_AP_P2P_CH_SWITCH_PROCESS_WK:
++		{
++			p2p_concurrent_handler( padapter );
++			break;
++		}		
++#endif
++#endif
++#ifdef CONFIG_IOCTL_CFG80211
++		case P2P_RO_CH_WK:
++		{
++			ro_ch_handler( padapter );
++			break;
++		}		
++#endif //CONFIG_IOCTL_CFG80211		
++
++	}
++	
++_func_exit_;
++}
++
++#ifdef CONFIG_P2P_PS
++void process_p2p_ps_ie(PADAPTER padapter, u8 *IEs, u32 IELength)
++{
++	u8 * ies;
++	u32 ies_len;
++	u8 * p2p_ie;
++	u32	p2p_ielen = 0;
++	u8	noa_attr[MAX_P2P_IE_LEN] = { 0x00 };// NoA length should be n*(13) + 2
++	u32	attr_contentlen = 0;
++	
++	struct wifidirect_info	*pwdinfo = &( padapter->wdinfo );
++	u8	find_p2p = _FALSE, find_p2p_ps = _FALSE;
++	u8	noa_offset, noa_num, noa_index;
++
++_func_enter_;
++
++	if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++	{
++		return;
++	}
++	
++#ifdef CONFIG_CONCURRENT_MODE
++	if(padapter->iface_type != IFACE_PORT0) 
++		return;
++#endif
++	if(IELength <= _BEACON_IE_OFFSET_)
++		return;
++	
++	ies = IEs + _BEACON_IE_OFFSET_;
++	ies_len = IELength - _BEACON_IE_OFFSET_;
++
++	p2p_ie = rtw_get_p2p_ie( ies, ies_len, NULL, &p2p_ielen);
++	
++	while(p2p_ie)
++	{
++		find_p2p = _TRUE;
++		// Get Notice of Absence IE.
++		if(rtw_get_p2p_attr_content( p2p_ie, p2p_ielen, P2P_ATTR_NOA, noa_attr, &attr_contentlen))
++		{
++			find_p2p_ps = _TRUE;
++			noa_index = noa_attr[0];
++
++			if( (pwdinfo->p2p_ps_mode == P2P_PS_NONE) ||
++				(noa_index != pwdinfo->noa_index) )// if index change, driver should reconfigure related setting.
++			{
++				pwdinfo->noa_index = noa_index;
++				pwdinfo->opp_ps = noa_attr[1] >> 7;
++				pwdinfo->ctwindow = noa_attr[1] & 0x7F;
++
++				noa_offset = 2;
++				noa_num = 0;
++				// NoA length should be n*(13) + 2
++				if(attr_contentlen > 2)
++				{
++					while(noa_offset < attr_contentlen)
++					{
++						//_rtw_memcpy(&wifidirect_info->noa_count[noa_num], &noa_attr[noa_offset], 1);
++						pwdinfo->noa_count[noa_num] = noa_attr[noa_offset];
++						noa_offset += 1;
++
++						_rtw_memcpy(&pwdinfo->noa_duration[noa_num], &noa_attr[noa_offset], 4);
++						noa_offset += 4;
++
++						_rtw_memcpy(&pwdinfo->noa_interval[noa_num], &noa_attr[noa_offset], 4);
++						noa_offset += 4;
++
++						_rtw_memcpy(&pwdinfo->noa_start_time[noa_num], &noa_attr[noa_offset], 4);
++						noa_offset += 4;
++
++						noa_num++;
++					}
++				}
++				pwdinfo->noa_num = noa_num;
++
++				if( pwdinfo->opp_ps == 1 )
++				{
++					pwdinfo->p2p_ps_mode = P2P_PS_CTWINDOW;
++					// driver should wait LPS for entering CTWindow
++					if(padapter->pwrctrlpriv.bFwCurrentInPSMode == _TRUE)
++					{
++						p2p_ps_wk_cmd(padapter, P2P_PS_ENABLE, 1);
++					}
++				}
++				else if( pwdinfo->noa_num > 0 )
++				{
++					pwdinfo->p2p_ps_mode = P2P_PS_NOA;
++					p2p_ps_wk_cmd(padapter, P2P_PS_ENABLE, 1);
++				}
++				else if( pwdinfo->p2p_ps_mode > P2P_PS_NONE)
++				{
++					p2p_ps_wk_cmd(padapter, P2P_PS_DISABLE, 1);
++				}
++			}
++
++			break; // find target, just break.
++		}
++
++		//Get the next P2P IE
++		p2p_ie = rtw_get_p2p_ie(p2p_ie+p2p_ielen, ies_len -(p2p_ie -ies + p2p_ielen), NULL, &p2p_ielen);
++
++	}
++
++	if(find_p2p == _TRUE)
++	{
++		if( (pwdinfo->p2p_ps_mode > P2P_PS_NONE) && (find_p2p_ps == _FALSE) )
++		{
++			p2p_ps_wk_cmd(padapter, P2P_PS_DISABLE, 1);
++		}
++	}
++
++_func_exit_;
++}
++
++void p2p_ps_wk_hdl(_adapter *padapter, u8 p2p_ps_state)
++{
++	struct pwrctrl_priv		*pwrpriv = &padapter->pwrctrlpriv;
++	struct wifidirect_info	*pwdinfo= &(padapter->wdinfo);
++	
++_func_enter_;
++
++	switch(p2p_ps_state)
++	{
++		case P2P_PS_DISABLE:
++			pwdinfo->p2p_ps_state = p2p_ps_state;
++			
++			rtw_hal_set_hwreg(padapter, HW_VAR_H2C_FW_P2P_PS_OFFLOAD, (u8 *)(&p2p_ps_state));
++
++			pwdinfo->noa_index = 0;
++			pwdinfo->ctwindow = 0;
++			pwdinfo->opp_ps = 0;
++			pwdinfo->noa_num = 0;
++			pwdinfo->p2p_ps_mode = P2P_PS_NONE;
++			if(padapter->pwrctrlpriv.bFwCurrentInPSMode == _TRUE)
++			{
++				if(pwrpriv->smart_ps == 0)
++				{
++					pwrpriv->smart_ps = 2;
++					rtw_hal_set_hwreg(padapter, HW_VAR_H2C_FW_PWRMODE, (u8 *)(&(padapter->pwrctrlpriv.pwr_mode)));
++				}
++			}
++			break;
++		case P2P_PS_ENABLE:
++			if (pwdinfo->p2p_ps_mode > P2P_PS_NONE) {
++				pwdinfo->p2p_ps_state = p2p_ps_state;
++				
++				if( pwdinfo->ctwindow > 0 )
++				{
++					if(pwrpriv->smart_ps != 0)
++					{
++						pwrpriv->smart_ps = 0;
++						DBG_871X("%s(): Enter CTW, change SmartPS\n", __FUNCTION__);
++						rtw_hal_set_hwreg(padapter, HW_VAR_H2C_FW_PWRMODE, (u8 *)(&(padapter->pwrctrlpriv.pwr_mode)));
++					}
++				}
++				rtw_hal_set_hwreg(padapter, HW_VAR_H2C_FW_P2P_PS_OFFLOAD, (u8 *)(&p2p_ps_state));
++			}
++			break;
++		case P2P_PS_SCAN:
++		case P2P_PS_SCAN_DONE:
++		case P2P_PS_ALLSTASLEEP:
++			if (pwdinfo->p2p_ps_mode > P2P_PS_NONE) {
++				pwdinfo->p2p_ps_state = p2p_ps_state;
++				rtw_hal_set_hwreg(padapter, HW_VAR_H2C_FW_P2P_PS_OFFLOAD, (u8 *)(&p2p_ps_state));
++			}
++			break;
++		default:
++			break;
++	}
++
++_func_exit_;
++}
++
++u8 p2p_ps_wk_cmd(_adapter*padapter, u8 p2p_ps_state, u8 enqueue)
++{
++	struct cmd_obj	*ph2c;
++	struct drvextra_cmd_parm	*pdrvextra_cmd_parm;
++	struct wifidirect_info	*pwdinfo= &(padapter->wdinfo);
++	struct cmd_priv	*pcmdpriv = &padapter->cmdpriv;
++	u8	res = _SUCCESS;
++	
++_func_enter_;
++
++	if ( rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE) 
++#ifdef CONFIG_CONCURRENT_MODE
++		|| (padapter->iface_type != IFACE_PORT0) 
++#endif
++		)
++	{
++		return res;
++	}
++
++	if(enqueue)
++	{
++		ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));	
++		if(ph2c==NULL){
++			res= _FAIL;
++			goto exit;
++		}
++		
++		pdrvextra_cmd_parm = (struct drvextra_cmd_parm*)rtw_zmalloc(sizeof(struct drvextra_cmd_parm)); 
++		if(pdrvextra_cmd_parm==NULL){
++			rtw_mfree((unsigned char *)ph2c, sizeof(struct cmd_obj));
++			res= _FAIL;
++			goto exit;
++		}
++
++		pdrvextra_cmd_parm->ec_id = P2P_PS_WK_CID;
++		pdrvextra_cmd_parm->type_size = p2p_ps_state;
++		pdrvextra_cmd_parm->pbuf = NULL;
++
++		init_h2fwcmd_w_parm_no_rsp(ph2c, pdrvextra_cmd_parm, GEN_CMD_CODE(_Set_Drv_Extra));
++
++		res = rtw_enqueue_cmd(pcmdpriv, ph2c);
++	}
++	else
++	{
++		p2p_ps_wk_hdl(padapter, p2p_ps_state);
++	}
++	
++exit:
++	
++_func_exit_;
++
++	return res;
++
++}
++#endif // CONFIG_P2P_PS
++
++static void reset_ch_sitesurvey_timer_process (void *FunctionContext)
++{
++	_adapter *adapter = (_adapter *)FunctionContext;
++	struct	wifidirect_info		*pwdinfo = &adapter->wdinfo;
++
++	if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++		return;
++
++	DBG_871X( "[%s] In\n", __FUNCTION__ );
++	//	Reset the operation channel information
++	pwdinfo->rx_invitereq_info.operation_ch[0] = 0;
++#ifdef P2P_OP_CHECK_SOCIAL_CH
++	pwdinfo->rx_invitereq_info.operation_ch[1] = 0;
++	pwdinfo->rx_invitereq_info.operation_ch[2] = 0;
++	pwdinfo->rx_invitereq_info.operation_ch[3] = 0;
++#endif //P2P_OP_CHECK_SOCIAL_CH 
++	pwdinfo->rx_invitereq_info.scan_op_ch_only = 0;
++}
++
++static void reset_ch_sitesurvey_timer_process2 (void *FunctionContext)
++{
++	_adapter *adapter = (_adapter *)FunctionContext;
++	struct	wifidirect_info		*pwdinfo = &adapter->wdinfo;
++
++	if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++		return;
++
++	DBG_871X( "[%s] In\n", __FUNCTION__ );
++	//	Reset the operation channel information
++	pwdinfo->p2p_info.operation_ch[0] = 0;
++#ifdef P2P_OP_CHECK_SOCIAL_CH
++	pwdinfo->p2p_info.operation_ch[1] = 0;
++	pwdinfo->p2p_info.operation_ch[2] = 0;
++	pwdinfo->p2p_info.operation_ch[3] = 0;
++#endif //P2P_OP_CHECK_SOCIAL_CH
++	pwdinfo->p2p_info.scan_op_ch_only = 0;
++}
++
++static void restore_p2p_state_timer_process (void *FunctionContext)
++{
++	_adapter *adapter = (_adapter *)FunctionContext;
++	struct	wifidirect_info		*pwdinfo = &adapter->wdinfo;
++
++	if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++		return; 
++	
++	p2p_protocol_wk_cmd( adapter, P2P_RESTORE_STATE_WK );
++}
++
++static void pre_tx_scan_timer_process (void *FunctionContext)
++{
++	_adapter 							*adapter = (_adapter *) FunctionContext;
++	struct	wifidirect_info				*pwdinfo = &adapter->wdinfo;
++	_irqL							irqL;
++	struct mlme_priv					*pmlmepriv = &adapter->mlmepriv;
++	u8								_status = 0;
++
++	if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++		return;
++	
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++
++	//	Commented by Albert 20110805
++	//	Todo: Use the issuing probe request directly instead of using the rtw_sitesurvey_cmd!!
++	
++	if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_TX_PROVISION_DIS_REQ))
++	{
++		if ( _TRUE == pwdinfo->tx_prov_disc_info.benable )	//	the provision discovery request frame is trigger to send or not
++		{
++			p2p_protocol_wk_cmd( adapter, P2P_PRE_TX_PROVDISC_PROCESS_WK );			
++			//issue_probereq_p2p(adapter, NULL);
++			//_set_timer( &pwdinfo->pre_tx_scan_timer, P2P_TX_PRESCAN_TIMEOUT );
++		}
++	}
++	else if (rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_ING))
++	{
++		if ( _TRUE == pwdinfo->nego_req_info.benable )
++		{
++			p2p_protocol_wk_cmd( adapter, P2P_PRE_TX_NEGOREQ_PROCESS_WK );
++			//issue_probereq_p2p(adapter, NULL);
++			//_set_timer( &pwdinfo->pre_tx_scan_timer, P2P_TX_PRESCAN_TIMEOUT );
++		}
++	}
++	else if ( rtw_p2p_chk_state(pwdinfo, P2P_STATE_TX_INVITE_REQ ) )
++	{
++		if ( _TRUE == pwdinfo->invitereq_info.benable )
++		{
++			p2p_protocol_wk_cmd( adapter, P2P_PRE_TX_INVITEREQ_PROCESS_WK );
++		}
++	}
++	else
++	{
++		DBG_8192C( "[%s] p2p_state is %d, ignore!!\n", __FUNCTION__, rtw_p2p_state(pwdinfo) );
++	}
++	
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++}
++
++static void find_phase_timer_process (void *FunctionContext)
++{
++	_adapter *adapter = (_adapter *)FunctionContext;
++	struct	wifidirect_info		*pwdinfo = &adapter->wdinfo;
++
++	if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++		return;
++
++	adapter->wdinfo.find_phase_state_exchange_cnt++;
++
++	p2p_protocol_wk_cmd( adapter, P2P_FIND_PHASE_WK );
++}
++
++#ifdef CONFIG_CONCURRENT_MODE
++void ap_p2p_switch_timer_process (void *FunctionContext)
++{
++	_adapter *adapter = (_adapter *)FunctionContext;
++	struct	wifidirect_info		*pwdinfo = &adapter->wdinfo;
++#ifdef CONFIG_IOCTL_CFG80211	
++	struct rtw_wdev_priv *pwdev_priv = wdev_to_priv(adapter->rtw_wdev);
++#endif
++
++	if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++		return;
++
++#ifdef CONFIG_IOCTL_CFG80211
++	ATOMIC_SET(&pwdev_priv->switch_ch_to, 1);
++#endif
++
++	p2p_protocol_wk_cmd( adapter, P2P_AP_P2P_CH_SWITCH_PROCESS_WK );
++}
++#endif
++
++void reset_global_wifidirect_info( _adapter* padapter )
++{
++	struct wifidirect_info	*pwdinfo;
++
++	pwdinfo = &padapter->wdinfo;
++	pwdinfo->persistent_supported = 0;
++	pwdinfo->session_available = _TRUE;
++	pwdinfo->wfd_tdls_enable = 0;
++	pwdinfo->wfd_tdls_weaksec = 0;
++}
++
++#ifdef CONFIG_WFD
++int rtw_init_wifi_display_info(_adapter* padapter)
++{
++	int	res = _SUCCESS;
++	struct wifi_display_info *pwfd_info = &padapter->wfd_info;
++
++	// Used in P2P and TDLS
++	pwfd_info->rtsp_ctrlport = 554;
++	pwfd_info->peer_rtsp_ctrlport = 0;	//	Reset to 0
++	pwfd_info->wfd_enable = _FALSE;
++	pwfd_info->wfd_device_type = WFD_DEVINFO_PSINK;
++	pwfd_info->scan_result_type = SCAN_RESULT_P2P_ONLY;
++
++	// Used in P2P	
++	pwfd_info->peer_session_avail = _TRUE;
++	pwfd_info->wfd_pc = _FALSE;
++
++	// Used in TDLS
++	_rtw_memset( pwfd_info->ip_address, 0x00, 4 );
++	_rtw_memset( pwfd_info->peer_ip_address, 0x00, 4 );
++	return res;
++
++}
++#endif //CONFIG_WFD
++
++void rtw_init_wifidirect_timers(_adapter* padapter)
++{
++	struct wifidirect_info *pwdinfo = &padapter->wdinfo;
++
++	_init_timer( &pwdinfo->find_phase_timer, padapter->pnetdev, find_phase_timer_process, padapter );
++	_init_timer( &pwdinfo->restore_p2p_state_timer, padapter->pnetdev, restore_p2p_state_timer_process, padapter );
++	_init_timer( &pwdinfo->pre_tx_scan_timer, padapter->pnetdev, pre_tx_scan_timer_process, padapter );
++	_init_timer( &pwdinfo->reset_ch_sitesurvey, padapter->pnetdev, reset_ch_sitesurvey_timer_process, padapter );
++	_init_timer( &pwdinfo->reset_ch_sitesurvey2, padapter->pnetdev, reset_ch_sitesurvey_timer_process2, padapter );
++#ifdef CONFIG_CONCURRENT_MODE
++	_init_timer( &pwdinfo->ap_p2p_switch_timer, padapter->pnetdev, ap_p2p_switch_timer_process, padapter );
++#endif
++}
++
++void rtw_init_wifidirect_addrs(_adapter* padapter, u8 *dev_addr, u8 *iface_addr)
++{
++#ifdef CONFIG_P2P
++	struct wifidirect_info *pwdinfo = &padapter->wdinfo;
++
++	/*init device&interface address */
++	if (dev_addr) {
++		_rtw_memcpy(pwdinfo->device_addr, dev_addr, ETH_ALEN);
++	}
++	if (iface_addr) {
++		_rtw_memcpy(pwdinfo->interface_addr, iface_addr, ETH_ALEN);
++	}
++#endif
++}
++
++void init_wifidirect_info( _adapter* padapter, enum P2P_ROLE role)
++{
++	struct wifidirect_info	*pwdinfo;
++#ifdef CONFIG_WFD
++	struct wifi_display_info	*pwfd_info = &padapter->wfd_info;
++#endif
++#ifdef CONFIG_CONCURRENT_MODE
++	_adapter				*pbuddy_adapter = padapter->pbuddy_adapter;
++	struct wifidirect_info	*pbuddy_wdinfo;
++	struct mlme_priv		*pbuddy_mlmepriv;
++	struct mlme_ext_priv	*pbuddy_mlmeext;
++#endif
++
++	pwdinfo = &padapter->wdinfo;
++
++	pwdinfo->padapter = padapter;
++	
++	//	1, 6, 11 are the social channel defined in the WiFi Direct specification.
++	pwdinfo->social_chan[0] = 1;
++	pwdinfo->social_chan[1] = 6;
++	pwdinfo->social_chan[2] = 11;
++	pwdinfo->social_chan[3] = 0;	//	channel 0 for scanning ending in site survey function.
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if (pbuddy_adapter) {
++		pbuddy_wdinfo = &pbuddy_adapter->wdinfo;
++		pbuddy_mlmepriv = &pbuddy_adapter->mlmepriv;
++		pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++	}
++
++	if ( ( check_buddy_fwstate(padapter, _FW_LINKED ) == _TRUE ) && 
++	      ( ( pbuddy_mlmeext->cur_channel == 1) || ( pbuddy_mlmeext->cur_channel == 6 ) || ( pbuddy_mlmeext->cur_channel == 11 ) )
++	   )
++	{
++		//	Use the AP's channel as the listen channel
++		//	This will avoid the channel switch between AP's channel and listen channel.
++		pwdinfo->listen_channel = pbuddy_mlmeext->cur_channel;
++	}
++	else
++#endif //CONFIG_CONCURRENT_MODE
++	{
++		//	Use the channel 11 as the listen channel
++		pwdinfo->listen_channel = 11;
++	}
++
++	if (role == P2P_ROLE_DEVICE)
++	{
++		rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE);
++		#ifdef CONFIG_CONCURRENT_MODE
++		if ( check_buddy_fwstate(padapter, _FW_LINKED ) == _TRUE )
++		{
++			rtw_p2p_set_state(pwdinfo, P2P_STATE_IDLE);
++		}
++		else
++		#endif
++		{
++			rtw_p2p_set_state(pwdinfo, P2P_STATE_LISTEN);
++		}
++		pwdinfo->intent = 1;
++		rtw_p2p_set_pre_state(pwdinfo, P2P_STATE_LISTEN);
++	}
++	else if (role == P2P_ROLE_CLIENT)
++	{
++		rtw_p2p_set_role(pwdinfo, P2P_ROLE_CLIENT);
++		rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_OK);
++		pwdinfo->intent = 1;
++		rtw_p2p_set_pre_state(pwdinfo, P2P_STATE_GONEGO_OK);
++	}	
++	else if (role == P2P_ROLE_GO)
++	{
++		rtw_p2p_set_role(pwdinfo, P2P_ROLE_GO);
++		rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_OK);
++		pwdinfo->intent = 15;
++		rtw_p2p_set_pre_state(pwdinfo, P2P_STATE_GONEGO_OK);
++	}
++
++//	Use the OFDM rate in the P2P probe response frame. ( 6(B), 9(B), 12, 18, 24, 36, 48, 54 )	
++	pwdinfo->support_rate[0] = 0x8c;	//	6(B)
++	pwdinfo->support_rate[1] = 0x92;	//	9(B)
++	pwdinfo->support_rate[2] = 0x18;	//	12
++	pwdinfo->support_rate[3] = 0x24;	//	18
++	pwdinfo->support_rate[4] = 0x30;	//	24
++	pwdinfo->support_rate[5] = 0x48;	//	36
++	pwdinfo->support_rate[6] = 0x60;	//	48
++	pwdinfo->support_rate[7] = 0x6c;	//	54
++
++	_rtw_memcpy( ( void* ) pwdinfo->p2p_wildcard_ssid, "DIRECT-", 7 );
++
++	_rtw_memset( pwdinfo->device_name, 0x00, WPS_MAX_DEVICE_NAME_LEN );
++	pwdinfo->device_name_len = 0;
++
++	_rtw_memset( &pwdinfo->invitereq_info, 0x00, sizeof( struct tx_invite_req_info ) );
++	pwdinfo->invitereq_info.token = 3;	//	Token used for P2P invitation request frame.
++	
++	_rtw_memset( &pwdinfo->inviteresp_info, 0x00, sizeof( struct tx_invite_resp_info ) );
++	pwdinfo->inviteresp_info.token = 0;
++
++	pwdinfo->profileindex = 0;
++	_rtw_memset( &pwdinfo->profileinfo[ 0 ], 0x00, sizeof( struct profile_info ) * P2P_MAX_PERSISTENT_GROUP_NUM );
++
++	rtw_p2p_findphase_ex_set(pwdinfo, P2P_FINDPHASE_EX_NONE);
++
++	pwdinfo->listen_dwell = ( u8 ) (( rtw_get_current_time() % 3 ) + 1);
++	//DBG_8192C( "[%s] listen_dwell time is %d00ms\n", __FUNCTION__, pwdinfo->listen_dwell );
++
++	_rtw_memset( &pwdinfo->tx_prov_disc_info, 0x00, sizeof( struct tx_provdisc_req_info ) );
++	pwdinfo->tx_prov_disc_info.wps_config_method_request = WPS_CM_NONE;
++
++	_rtw_memset( &pwdinfo->nego_req_info, 0x00, sizeof( struct tx_nego_req_info ) );
++
++	pwdinfo->device_password_id_for_nego = WPS_DPID_PBC;
++	pwdinfo->negotiation_dialog_token = 1;
++
++	_rtw_memset( pwdinfo->nego_ssid, 0x00, WLAN_SSID_MAXLEN );
++	pwdinfo->nego_ssidlen = 0;
++
++	pwdinfo->ui_got_wps_info = P2P_NO_WPSINFO;
++#ifdef CONFIG_WFD
++	pwdinfo->supported_wps_cm = WPS_CONFIG_METHOD_DISPLAY  | WPS_CONFIG_METHOD_PBC;
++	pwdinfo->wfd_info = pwfd_info;
++#else
++	pwdinfo->supported_wps_cm = WPS_CONFIG_METHOD_DISPLAY | WPS_CONFIG_METHOD_PBC | WPS_CONFIG_METHOD_KEYPAD;
++#endif //CONFIG_WFD
++	pwdinfo->channel_list_attr_len = 0;
++	_rtw_memset( pwdinfo->channel_list_attr, 0x00, 100 );
++
++	_rtw_memset( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, 0x00, 4 );
++	_rtw_memset( pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req, '0', 3 );
++	_rtw_memset( &pwdinfo->groupid_info, 0x00, sizeof( struct group_id_info ) );
++#ifdef CONFIG_CONCURRENT_MODE
++#ifdef CONFIG_IOCTL_CFG80211
++	pwdinfo->ext_listen_interval = 1000; //The interval to be available with legacy AP during p2p0-find/scan
++	pwdinfo->ext_listen_period = 3000; //The time period to be available for P2P during nego
++#else //!CONFIG_IOCTL_CFG80211
++	//pwdinfo->ext_listen_interval = 3000;
++	//pwdinfo->ext_listen_period = 400;
++	pwdinfo->ext_listen_interval = 1000;
++	pwdinfo->ext_listen_period = 1000;
++#endif //!CONFIG_IOCTL_CFG80211
++#endif
++
++// Commented by Kurt 20130319
++// For WiDi purpose: Use CFG80211 interface but controled WFD/RDS frame by driver itself.
++#ifdef CONFIG_IOCTL_CFG80211
++	pwdinfo->driver_interface = DRIVER_CFG80211;
++#else
++	pwdinfo->driver_interface = DRIVER_WEXT;
++#endif //CONFIG_IOCTL_CFG80211
++
++	pwdinfo->wfd_tdls_enable = 0;
++	_rtw_memset( pwdinfo->p2p_peer_interface_addr, 0x00, ETH_ALEN );
++	_rtw_memset( pwdinfo->p2p_peer_device_addr, 0x00, ETH_ALEN );
++
++	pwdinfo->rx_invitereq_info.operation_ch[0] = 0;
++	pwdinfo->rx_invitereq_info.operation_ch[1] = 0;	//	Used to indicate the scan end in site survey function
++#ifdef P2P_OP_CHECK_SOCIAL_CH
++	pwdinfo->rx_invitereq_info.operation_ch[2] = 0;
++	pwdinfo->rx_invitereq_info.operation_ch[3] = 0;
++	pwdinfo->rx_invitereq_info.operation_ch[4] = 0;
++#endif //P2P_OP_CHECK_SOCIAL_CH
++	pwdinfo->rx_invitereq_info.scan_op_ch_only = 0;
++	pwdinfo->p2p_info.operation_ch[0] = 0;
++	pwdinfo->p2p_info.operation_ch[1] = 0;			//	Used to indicate the scan end in site survey function
++#ifdef P2P_OP_CHECK_SOCIAL_CH
++	pwdinfo->p2p_info.operation_ch[2] = 0;
++	pwdinfo->p2p_info.operation_ch[3] = 0;
++	pwdinfo->p2p_info.operation_ch[4] = 0;
++#endif //P2P_OP_CHECK_SOCIAL_CH
++	pwdinfo->p2p_info.scan_op_ch_only = 0;
++}
++
++#ifdef CONFIG_DBG_P2P
++
++/**
++ * rtw_p2p_role_txt - Get the p2p role name as a text string
++ * @role: P2P role
++ * Returns: The state name as a printable text string
++ */
++const char * rtw_p2p_role_txt(enum P2P_ROLE role)
++{
++	switch (role) {
++	case P2P_ROLE_DISABLE:
++		return "P2P_ROLE_DISABLE";
++	case P2P_ROLE_DEVICE:
++		return "P2P_ROLE_DEVICE";
++	case P2P_ROLE_CLIENT:
++		return "P2P_ROLE_CLIENT";
++	case P2P_ROLE_GO:
++		return "P2P_ROLE_GO";
++	default:
++		return "UNKNOWN";
++	}
++}
++
++/**
++ * rtw_p2p_state_txt - Get the p2p state name as a text string
++ * @state: P2P state
++ * Returns: The state name as a printable text string
++ */
++const char * rtw_p2p_state_txt(enum P2P_STATE state)
++{
++	switch (state) {
++	case P2P_STATE_NONE:
++		return "P2P_STATE_NONE";
++	case P2P_STATE_IDLE:
++		return "P2P_STATE_IDLE";
++	case P2P_STATE_LISTEN:
++		return "P2P_STATE_LISTEN";
++	case P2P_STATE_SCAN:
++		return "P2P_STATE_SCAN";
++	case P2P_STATE_FIND_PHASE_LISTEN:
++		return "P2P_STATE_FIND_PHASE_LISTEN";
++	case P2P_STATE_FIND_PHASE_SEARCH:
++		return "P2P_STATE_FIND_PHASE_SEARCH";
++	case P2P_STATE_TX_PROVISION_DIS_REQ:
++		return "P2P_STATE_TX_PROVISION_DIS_REQ";
++	case P2P_STATE_RX_PROVISION_DIS_RSP:
++		return "P2P_STATE_RX_PROVISION_DIS_RSP";
++	case P2P_STATE_RX_PROVISION_DIS_REQ:
++		return "P2P_STATE_RX_PROVISION_DIS_REQ";
++	case P2P_STATE_GONEGO_ING:
++		return "P2P_STATE_GONEGO_ING";
++	case P2P_STATE_GONEGO_OK:
++		return "P2P_STATE_GONEGO_OK";
++	case P2P_STATE_GONEGO_FAIL:
++		return "P2P_STATE_GONEGO_FAIL";
++	case P2P_STATE_RECV_INVITE_REQ_MATCH:
++		return "P2P_STATE_RECV_INVITE_REQ_MATCH";
++	case P2P_STATE_PROVISIONING_ING:
++		return "P2P_STATE_PROVISIONING_ING";
++	case P2P_STATE_PROVISIONING_DONE:
++		return "P2P_STATE_PROVISIONING_DONE";
++	case P2P_STATE_TX_INVITE_REQ:
++		return "P2P_STATE_TX_INVITE_REQ";
++	case P2P_STATE_RX_INVITE_RESP_OK:
++		return "P2P_STATE_RX_INVITE_RESP_OK";
++	case P2P_STATE_RECV_INVITE_REQ_DISMATCH:
++		return "P2P_STATE_RECV_INVITE_REQ_DISMATCH";
++	case P2P_STATE_RECV_INVITE_REQ_GO:
++		return "P2P_STATE_RECV_INVITE_REQ_GO";
++	case P2P_STATE_RECV_INVITE_REQ_JOIN:
++		return "P2P_STATE_RECV_INVITE_REQ_JOIN";
++	case P2P_STATE_RX_INVITE_RESP_FAIL:
++		return "P2P_STATE_RX_INVITE_RESP_FAIL";
++	case P2P_STATE_RX_INFOR_NOREADY:
++		return "P2P_STATE_RX_INFOR_NOREADY";
++	case P2P_STATE_TX_INFOR_NOREADY:
++		return "P2P_STATE_TX_INFOR_NOREADY";
++	default:
++		return "UNKNOWN";
++	}
++}
++
++void dbg_rtw_p2p_set_state(struct wifidirect_info *wdinfo, enum P2P_STATE state, const char *caller, int line)
++{
++	if(!_rtw_p2p_chk_state(wdinfo, state)) {
++		enum P2P_STATE old_state = _rtw_p2p_state(wdinfo);
++		_rtw_p2p_set_state(wdinfo, state);
++		DBG_871X("[CONFIG_DBG_P2P]%s:%d set_state from %s to %s\n", caller, line
++			, rtw_p2p_state_txt(old_state), rtw_p2p_state_txt(_rtw_p2p_state(wdinfo))
++		);
++	} else {
++		DBG_871X("[CONFIG_DBG_P2P]%s:%d set_state to same state %s\n", caller, line
++			, rtw_p2p_state_txt(_rtw_p2p_state(wdinfo))
++		);
++	}
++}
++void dbg_rtw_p2p_set_pre_state(struct wifidirect_info *wdinfo, enum P2P_STATE state, const char *caller, int line)
++{
++	if(_rtw_p2p_pre_state(wdinfo) != state) {
++		enum P2P_STATE old_state = _rtw_p2p_pre_state(wdinfo); 
++		_rtw_p2p_set_pre_state(wdinfo, state);
++		DBG_871X("[CONFIG_DBG_P2P]%s:%d set_pre_state from %s to %s\n", caller, line
++			, rtw_p2p_state_txt(old_state), rtw_p2p_state_txt(_rtw_p2p_pre_state(wdinfo))
++		);
++	} else {
++		DBG_871X("[CONFIG_DBG_P2P]%s:%d set_pre_state to same state %s\n", caller, line
++			, rtw_p2p_state_txt(_rtw_p2p_pre_state(wdinfo))
++		);
++	}
++}
++#if 0
++void dbg_rtw_p2p_restore_state(struct wifidirect_info *wdinfo, const char *caller, int line)
++{
++	if(wdinfo->pre_p2p_state != -1) {
++		DBG_871X("[CONFIG_DBG_P2P]%s:%d restore from %s to %s\n", caller, line
++			, p2p_state_str[wdinfo->p2p_state], p2p_state_str[wdinfo->pre_p2p_state]
++		);
++		_rtw_p2p_restore_state(wdinfo);
++	} else {
++		DBG_871X("[CONFIG_DBG_P2P]%s:%d restore no pre state, cur state %s\n", caller, line
++			, p2p_state_str[wdinfo->p2p_state]
++		);		
++	}
++}
++#endif
++void dbg_rtw_p2p_set_role(struct wifidirect_info *wdinfo, enum P2P_ROLE role, const char *caller, int line)
++{
++	if(wdinfo->role != role) {
++		enum P2P_ROLE old_role = wdinfo->role;
++		_rtw_p2p_set_role(wdinfo, role);
++		DBG_871X("[CONFIG_DBG_P2P]%s:%d set_role from %s to %s\n", caller, line
++			, rtw_p2p_role_txt(old_role), rtw_p2p_role_txt(wdinfo->role)
++		);
++	} else {
++		DBG_871X("[CONFIG_DBG_P2P]%s:%d set_role to same role %s\n", caller, line
++			, rtw_p2p_role_txt(wdinfo->role)
++		);
++	}
++}
++#endif //CONFIG_DBG_P2P
++
++
++int rtw_p2p_enable(_adapter *padapter, enum P2P_ROLE role)
++{
++	int ret = _SUCCESS;
++	struct wifidirect_info *pwdinfo= &(padapter->wdinfo);
++	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
++
++	if (role == P2P_ROLE_DEVICE || role == P2P_ROLE_CLIENT|| role == P2P_ROLE_GO)
++	{
++		u8 channel, ch_offset;
++		u16 bwmode;
++
++#ifdef CONFIG_CONCURRENT_MODE
++		_adapter				*pbuddy_adapter = padapter->pbuddy_adapter;
++		struct wifidirect_info	*pbuddy_wdinfo = &pbuddy_adapter->wdinfo;
++		//	Commented by Albert 2011/12/30
++		//	The driver just supports 1 P2P group operation.
++		//	So, this function will do nothing if the buddy adapter had enabled the P2P function.
++		if(!rtw_p2p_chk_state(pbuddy_wdinfo, P2P_STATE_NONE))
++		{
++			//	The buddy adapter had enabled the P2P function.
++			return ret;
++		}
++#endif //CONFIG_CONCURRENT_MODE
++
++		//leave IPS/Autosuspend
++		if (_FAIL == rtw_pwr_wakeup(padapter)) {
++			ret = _FAIL;
++			goto exit;
++		}
++		
++
++		//	Added by Albert 2011/03/22
++		//	In the P2P mode, the driver should not support the b mode.
++		//	So, the Tx packet shouldn't use the CCK rate
++		update_tx_basic_rate(padapter, WIRELESS_11AGN);
++
++		//Enable P2P function
++		init_wifidirect_info(padapter, role);
++	}
++	else if (role == P2P_ROLE_DISABLE)
++	{
++#ifdef CONFIG_INTEL_WIDI
++		if( padapter->mlmepriv.p2p_reject_disable == _TRUE )
++			return ret;
++#endif //CONFIG_INTEL_WIDI
++
++		if (_FAIL == rtw_pwr_wakeup(padapter)) {
++			ret = _FAIL;
++			goto exit;
++		}	
++
++		//Disable P2P function
++		if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++		{
++			_cancel_timer_ex( &pwdinfo->find_phase_timer );
++			_cancel_timer_ex( &pwdinfo->restore_p2p_state_timer );
++			_cancel_timer_ex( &pwdinfo->pre_tx_scan_timer);
++			_cancel_timer_ex( &pwdinfo->reset_ch_sitesurvey);
++			_cancel_timer_ex( &pwdinfo->reset_ch_sitesurvey2);
++			reset_ch_sitesurvey_timer_process( padapter );
++			reset_ch_sitesurvey_timer_process2( padapter );
++			#ifdef CONFIG_CONCURRENT_MODE			
++			_cancel_timer_ex( &pwdinfo->ap_p2p_switch_timer);
++			#endif
++			rtw_p2p_set_state(pwdinfo, P2P_STATE_NONE);
++			rtw_p2p_set_role(pwdinfo, P2P_ROLE_DISABLE);
++			_rtw_memset(&pwdinfo->rx_prov_disc_info, 0x00, sizeof(struct rx_provdisc_req_info));
++		}
++
++		//Restore to initial setting.
++		update_tx_basic_rate(padapter, padapter->registrypriv.wireless_mode);
++
++#ifdef CONFIG_INTEL_WIDI
++		rtw_reset_widi_info(padapter);
++#endif //CONFIG_INTEL_WIDI
++
++		//For WiDi purpose.
++#ifdef CONFIG_IOCTL_CFG80211
++		pwdinfo->driver_interface = DRIVER_CFG80211;
++#else
++		pwdinfo->driver_interface = DRIVER_WEXT;
++#endif //CONFIG_IOCTL_CFG80211
++
++	}
++
++exit:	
++	return ret;
++}
++
++#endif //CONFIG_P2P
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_pwrctrl.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_pwrctrl.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_pwrctrl.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_pwrctrl.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,1540 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _RTW_PWRCTRL_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <osdep_intf.h>
++
++
++#ifdef CONFIG_IPS
++void _ips_enter(_adapter * padapter)
++{
++	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
++
++	pwrpriv->bips_processing = _TRUE;
++
++	// syn ips_mode with request
++	pwrpriv->ips_mode = pwrpriv->ips_mode_req;
++
++	pwrpriv->ips_enter_cnts++;
++	DBG_871X("==>ips_enter cnts:%d\n",pwrpriv->ips_enter_cnts);
++
++	if(rf_off == pwrpriv->change_rfpwrstate)
++	{
++		if(pwrpriv->ips_mode == IPS_LEVEL_2)
++			pwrpriv->bkeepfwalive = _TRUE;
++
++		rtw_ips_pwr_down(padapter);
++		pwrpriv->rf_pwrstate = rf_off;
++	}
++	pwrpriv->bips_processing = _FALSE;
++
++}
++
++void ips_enter(_adapter * padapter)
++{
++	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
++
++	_enter_pwrlock(&pwrpriv->lock);
++	_ips_enter(padapter);
++	_exit_pwrlock(&pwrpriv->lock);
++}
++
++int _ips_leave(_adapter * padapter)
++{
++	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
++	int result = _SUCCESS;
++
++	if((pwrpriv->rf_pwrstate == rf_off) &&(!pwrpriv->bips_processing))
++	{
++		pwrpriv->bips_processing = _TRUE;
++		pwrpriv->change_rfpwrstate = rf_on;
++		pwrpriv->ips_leave_cnts++;
++		DBG_871X("==>ips_leave cnts:%d\n",pwrpriv->ips_leave_cnts);
++
++		if ((result = rtw_ips_pwr_up(padapter)) == _SUCCESS) {
++			pwrpriv->rf_pwrstate = rf_on;
++		}
++
++		DBG_871X("==> ips_leave.....LED(0x%08x)...\n",rtw_read32(padapter,0x4c));
++		pwrpriv->bips_processing = _FALSE;
++
++		pwrpriv->bkeepfwalive = _FALSE;
++	}
++
++	return result;
++}
++
++int ips_leave(_adapter * padapter)
++{
++	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
++	int ret;
++
++	_enter_pwrlock(&pwrpriv->lock);
++	ret = _ips_leave(padapter);
++	_exit_pwrlock(&pwrpriv->lock);
++
++	return ret;
++}
++#endif /* CONFIG_IPS */
++
++#ifdef CONFIG_AUTOSUSPEND
++extern void autosuspend_enter(_adapter* padapter);	
++extern int autoresume_enter(_adapter* padapter);
++#endif
++
++#ifdef SUPPORT_HW_RFOFF_DETECTED
++int rtw_hw_suspend(_adapter *padapter );
++int rtw_hw_resume(_adapter *padapter);
++#endif
++
++bool rtw_pwr_unassociated_idle(_adapter *adapter)
++{
++	_adapter *buddy = adapter->pbuddy_adapter;
++	struct mlme_priv *pmlmepriv = &(adapter->mlmepriv);
++#ifdef CONFIG_P2P
++	struct wifidirect_info	*pwdinfo = &(adapter->wdinfo);
++#ifdef CONFIG_IOCTL_CFG80211
++	struct cfg80211_wifidirect_info *pcfg80211_wdinfo = &adapter->cfg80211_wdinfo;
++#endif
++#endif
++
++	bool ret = _FALSE;
++
++	if (adapter->pwrctrlpriv.ips_deny_time >= rtw_get_current_time()) {
++		//DBG_871X("%s ips_deny_time\n", __func__);
++		goto exit;
++	}
++
++	if (check_fwstate(pmlmepriv, WIFI_ASOC_STATE|WIFI_SITE_MONITOR)
++		|| check_fwstate(pmlmepriv, WIFI_UNDER_LINKING|WIFI_UNDER_WPS)
++		|| check_fwstate(pmlmepriv, WIFI_AP_STATE)
++		|| check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE|WIFI_ADHOC_STATE)
++		#if defined(CONFIG_P2P) && defined(CONFIG_IOCTL_CFG80211) && defined(CONFIG_P2P_IPS)
++		|| pcfg80211_wdinfo->is_ro_ch
++		#elif defined(CONFIG_P2P)
++		|| !rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)
++		#endif
++	) {
++		goto exit;
++	}
++
++	/* consider buddy, if exist */
++	if (buddy) {
++		struct mlme_priv *b_pmlmepriv = &(buddy->mlmepriv);
++		#ifdef CONFIG_P2P
++		struct wifidirect_info *b_pwdinfo = &(buddy->wdinfo);
++		#ifdef CONFIG_IOCTL_CFG80211		
++		struct cfg80211_wifidirect_info *b_pcfg80211_wdinfo = &buddy->cfg80211_wdinfo;
++		#endif
++		#endif
++
++		if (check_fwstate(b_pmlmepriv, WIFI_ASOC_STATE|WIFI_SITE_MONITOR)
++			|| check_fwstate(b_pmlmepriv, WIFI_UNDER_LINKING|WIFI_UNDER_WPS)
++			|| check_fwstate(b_pmlmepriv, WIFI_AP_STATE)
++			|| check_fwstate(b_pmlmepriv, WIFI_ADHOC_MASTER_STATE|WIFI_ADHOC_STATE)
++			#if defined(CONFIG_P2P) && defined(CONFIG_IOCTL_CFG80211) && defined(CONFIG_P2P_IPS)
++			|| b_pcfg80211_wdinfo->is_ro_ch
++			#elif defined(CONFIG_P2P)
++			|| !rtw_p2p_chk_state(b_pwdinfo, P2P_STATE_NONE)
++			#endif
++		) {
++			goto exit;
++		}
++	}
++
++#ifdef CONFIG_INTEL_PROXIM
++	if(adapter->proximity.proxim_on==_TRUE){
++		return;
++	}
++#endif
++
++	ret = _TRUE;
++
++exit:
++	return ret;
++}
++
++#if defined (PLATFORM_LINUX)||defined (PLATFORM_FREEBSD)
++void rtw_ps_processor(_adapter*padapter)
++{
++#ifdef CONFIG_P2P
++	struct wifidirect_info	*pwdinfo = &( padapter->wdinfo );
++#endif //CONFIG_P2P
++	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++#ifdef SUPPORT_HW_RFOFF_DETECTED
++	rt_rf_power_state rfpwrstate;
++#endif //SUPPORT_HW_RFOFF_DETECTED
++
++	pwrpriv->ps_processing = _TRUE;
++
++#ifdef SUPPORT_HW_RFOFF_DETECTED
++	if(pwrpriv->bips_processing == _TRUE)
++		goto exit;
++	
++	//DBG_871X("==> fw report state(0x%x)\n",rtw_read8(padapter,0x1ca));	
++	if(padapter->pwrctrlpriv.bHWPwrPindetect) 
++	{
++	#ifdef CONFIG_AUTOSUSPEND
++		if(padapter->registrypriv.usbss_enable)
++		{
++			if(pwrpriv->rf_pwrstate == rf_on)
++			{
++				if(padapter->net_closed == _TRUE)
++					pwrpriv->ps_flag = _TRUE;
++
++				rfpwrstate = RfOnOffDetect(padapter);
++				DBG_871X("@@@@- #1  %s==> rfstate:%s \n",__FUNCTION__,(rfpwrstate==rf_on)?"rf_on":"rf_off");
++				if(rfpwrstate!= pwrpriv->rf_pwrstate)
++				{
++					if(rfpwrstate == rf_off)
++					{
++						pwrpriv->change_rfpwrstate = rf_off;
++						
++						pwrpriv->bkeepfwalive = _TRUE;	
++						pwrpriv->brfoffbyhw = _TRUE;						
++						
++						autosuspend_enter(padapter);							
++					}
++				}
++			}			
++		}
++		else
++	#endif //CONFIG_AUTOSUSPEND
++		{
++			rfpwrstate = RfOnOffDetect(padapter);
++			DBG_871X("@@@@- #2  %s==> rfstate:%s \n",__FUNCTION__,(rfpwrstate==rf_on)?"rf_on":"rf_off");
++
++			if(rfpwrstate!= pwrpriv->rf_pwrstate)
++			{
++				if(rfpwrstate == rf_off)
++				{	
++					pwrpriv->change_rfpwrstate = rf_off;														
++					pwrpriv->brfoffbyhw = _TRUE;
++					padapter->bCardDisableWOHSM = _TRUE;
++					rtw_hw_suspend(padapter );	
++				}
++				else
++				{
++					pwrpriv->change_rfpwrstate = rf_on;
++					rtw_hw_resume(padapter );			
++				}
++				DBG_871X("current rf_pwrstate(%s)\n",(pwrpriv->rf_pwrstate == rf_off)?"rf_off":"rf_on");
++			}
++		}
++		pwrpriv->pwr_state_check_cnts ++;	
++	}
++#endif //SUPPORT_HW_RFOFF_DETECTED
++
++	if (pwrpriv->ips_mode_req == IPS_NONE
++		#ifdef CONFIG_CONCURRENT_MODE
++		|| padapter->pbuddy_adapter->pwrctrlpriv.ips_mode_req == IPS_NONE
++		#endif
++	)
++		goto exit;
++
++	if (rtw_pwr_unassociated_idle(padapter) == _FALSE)
++		goto exit;
++
++	if((pwrpriv->rf_pwrstate == rf_on) && ((pwrpriv->pwr_state_check_cnts%4)==0))
++	{
++		DBG_871X("==>%s .fw_state(%x)\n",__FUNCTION__,get_fwstate(pmlmepriv));
++		pwrpriv->change_rfpwrstate = rf_off;
++
++		#ifdef CONFIG_AUTOSUSPEND
++		if(padapter->registrypriv.usbss_enable)
++		{		
++			if(pwrpriv->bHWPwrPindetect) 
++				pwrpriv->bkeepfwalive = _TRUE;
++			
++			if(padapter->net_closed == _TRUE)
++				pwrpriv->ps_flag = _TRUE;
++
++			padapter->bCardDisableWOHSM = _TRUE;
++			autosuspend_enter(padapter);
++		}		
++		else if(pwrpriv->bHWPwrPindetect)
++		{
++		}
++		else
++		#endif //CONFIG_AUTOSUSPEND
++		{
++			#ifdef CONFIG_IPS	
++			ips_enter(padapter);			
++			#endif
++		}
++	}
++exit:
++	rtw_set_pwr_state_check_timer(&padapter->pwrctrlpriv);
++	pwrpriv->ps_processing = _FALSE;
++	return;
++}
++
++void pwr_state_check_handler(void *FunctionContext);
++void pwr_state_check_handler(void *FunctionContext)
++{
++	_adapter *padapter = (_adapter *)FunctionContext;
++	rtw_ps_cmd(padapter);
++}
++#endif
++
++
++#ifdef CONFIG_LPS
++/*
++ *
++ * Parameters
++ *	padapter
++ *	pslv			power state level, only could be PS_STATE_S0 ~ PS_STATE_S4
++ *
++ */
++void rtw_set_rpwm(PADAPTER padapter, u8 pslv)
++{
++	u8	rpwm;
++	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
++
++_func_enter_;
++
++	pslv = PS_STATE(pslv);
++
++	if (pwrpriv->rpwm == pslv) {
++		RT_TRACE(_module_rtl871x_pwrctrl_c_,_drv_err_,
++			("%s: Already set rpwm[0x%02x]!\n", __FUNCTION__, pslv));
++		return;
++	}
++
++	if ((padapter->bDriverStopped == _TRUE) ||
++		(padapter->bSurpriseRemoved == _TRUE)) {
++		RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_err_,
++				 ("%s: bDriverStopped(%d) bSurpriseRemoved(%d)\n",
++				  __FUNCTION__, padapter->bDriverStopped, padapter->bSurpriseRemoved));
++		return;
++	}
++
++	rpwm = pslv | pwrpriv->tog;
++#ifdef CONFIG_LPS_LCLK
++	if ((pwrpriv->cpwm < PS_STATE_S2) && (pslv >= PS_STATE_S2))
++		rpwm |= PS_ACK;
++#endif
++	RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_notice_,
++			 ("rtw_set_rpwm: rpwm=0x%02x cpwm=0x%02x\n", rpwm, pwrpriv->cpwm));
++
++	pwrpriv->rpwm = pslv;
++
++	rtw_hal_set_hwreg(padapter, HW_VAR_SET_RPWM, (u8 *)(&rpwm));
++
++	pwrpriv->tog += 0x80;
++
++	if (!(rpwm & PS_ACK)) pwrpriv->cpwm = pslv;
++
++_func_exit_;
++}
++
++u8 PS_RDY_CHECK(_adapter * padapter);
++u8 PS_RDY_CHECK(_adapter * padapter)
++{
++	u32 curr_time, delta_time;
++	struct pwrctrl_priv	*pwrpriv = &padapter->pwrctrlpriv;
++	struct mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
++
++	curr_time = rtw_get_current_time();	
++
++	delta_time = curr_time -pwrpriv->DelayLPSLastTimeStamp;
++
++	if(delta_time < LPS_DELAY_TIME)
++	{		
++		return _FALSE;
++	}
++
++	if ((check_fwstate(pmlmepriv, _FW_LINKED) == _FALSE) ||
++		(check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) ||
++		(check_fwstate(pmlmepriv, WIFI_UNDER_WPS) == _TRUE) ||
++		(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) ||
++		(check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE) ||
++		(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == _TRUE) )
++		return _FALSE;
++
++	if(_TRUE == pwrpriv->bInSuspend )
++		return _FALSE;
++	
++	if( (padapter->securitypriv.dot11AuthAlgrthm == dot11AuthAlgrthm_8021X) && (padapter->securitypriv.binstallGrpkey == _FALSE) )
++	{
++		DBG_871X("Group handshake still in progress !!!\n");
++		return _FALSE;
++	}
++
++#ifdef CONFIG_IOCTL_CFG80211
++	if (!rtw_cfg80211_pwr_mgmt(padapter))
++		return _FALSE;
++#endif	
++
++	return _TRUE;
++}
++
++void rtw_set_ps_mode(PADAPTER padapter, u8 ps_mode, u8 smart_ps)
++{
++	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
++#ifdef CONFIG_P2P
++	struct wifidirect_info	*pwdinfo = &( padapter->wdinfo );
++#endif //CONFIG_P2P
++#ifdef CONFIG_TDLS
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	_irqL irqL;
++	int i, j;
++	_list	*plist, *phead;
++	struct sta_info *ptdls_sta;
++#endif //CONFIG_TDLS
++
++_func_enter_;
++
++	RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_notice_,
++			 ("%s: PowerMode=%d Smart_PS=%d\n",
++			  __FUNCTION__, ps_mode, smart_ps));
++
++	if(ps_mode > PM_Card_Disable) {
++		RT_TRACE(_module_rtl871x_pwrctrl_c_,_drv_err_,("ps_mode:%d error\n", ps_mode));
++		return;
++	}
++
++	if((pwrpriv->pwr_mode == ps_mode) &&
++		(pwrpriv->smart_ps == smart_ps)){
++		return;
++	}
++
++	//if(pwrpriv->pwr_mode == PS_MODE_ACTIVE)
++	if(ps_mode == PS_MODE_ACTIVE)
++	{
++#ifdef CONFIG_P2P_PS
++		if(pwdinfo->opp_ps == 0)
++#endif // CONFIG_P2P_PS
++		{
++#ifdef CONFIG_LPS_LCLK
++			_enter_pwrlock(&pwrpriv->lock);
++#endif
++			DBG_871X("rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..\n");
++
++#ifdef CONFIG_TDLS
++			_enter_critical_bh(&pstapriv->sta_hash_lock, &irqL);
++
++			for(i=0; i< NUM_STA; i++)
++			{
++				phead = &(pstapriv->sta_hash[i]);
++				plist = get_next(phead);
++
++				while ((rtw_end_of_queue_search(phead, plist)) == _FALSE)
++				{
++					ptdls_sta = LIST_CONTAINOR(plist, struct sta_info, hash_list);
++
++					if( ptdls_sta->tdls_sta_state & TDLS_LINKED_STATE )
++						issue_nulldata_to_TDLS_peer_STA(padapter, ptdls_sta, 0);
++					plist = get_next(plist);
++				}
++			}
++
++			_exit_critical_bh(&pstapriv->sta_hash_lock, &irqL);
++#endif //CONFIG_TDLS
++
++			pwrpriv->smart_ps = smart_ps;
++			pwrpriv->pwr_mode = ps_mode;
++
++			rtw_set_rpwm(padapter, PS_STATE_S4);
++#ifdef CONFIG_LPS_LCLK
++{
++			u32 n = 0;
++			while (pwrpriv->cpwm != PS_STATE_S4) {
++				n++;
++				if (n == 10000) break;
++				if (padapter->bSurpriseRemoved == _TRUE) break;
++				rtw_msleep_os(1);
++			}
++			if (n == 10000)
++				printk(KERN_ERR "%s: wait CPWM to S4 too long! cpwm=0x%02x\n", __func__, pwrpriv->cpwm);
++}
++#endif
++			rtw_hal_set_hwreg(padapter, HW_VAR_H2C_FW_PWRMODE, (u8 *)(&ps_mode));
++			pwrpriv->bFwCurrentInPSMode = _FALSE;
++#ifdef CONFIG_LPS_LCLK
++			_exit_pwrlock(&pwrpriv->lock);
++#endif
++		}
++	}
++	else
++	{
++		if(PS_RDY_CHECK(padapter))
++		{
++#ifdef CONFIG_LPS_LCLK
++			_enter_pwrlock(&pwrpriv->lock);
++#endif
++			DBG_871X("rtw_set_ps_mode(): Enter 802.11 power save mode...\n");
++
++#ifdef CONFIG_TDLS
++			_enter_critical_bh(&pstapriv->sta_hash_lock, &irqL);
++
++			for(i=0; i< NUM_STA; i++)
++			{
++				phead = &(pstapriv->sta_hash[i]);
++				plist = get_next(phead);
++
++				while ((rtw_end_of_queue_search(phead, plist)) == _FALSE)
++				{
++					ptdls_sta = LIST_CONTAINOR(plist, struct sta_info, hash_list);
++
++					if( ptdls_sta->tdls_sta_state & TDLS_LINKED_STATE )
++						issue_nulldata_to_TDLS_peer_STA(padapter, ptdls_sta, 1);
++					plist = get_next(plist);
++				}
++			}
++
++			_exit_critical_bh(&pstapriv->sta_hash_lock, &irqL);
++#endif //CONFIG_TDLS
++
++			pwrpriv->smart_ps = smart_ps;
++			pwrpriv->pwr_mode = ps_mode;
++			pwrpriv->bFwCurrentInPSMode = _TRUE;
++			rtw_hal_set_hwreg(padapter, HW_VAR_H2C_FW_PWRMODE, (u8 *)(&ps_mode));
++#ifdef CONFIG_P2P_PS
++			// Set CTWindow after LPS
++			if(pwdinfo->opp_ps == 1)
++				p2p_ps_wk_cmd(padapter, P2P_PS_ENABLE, 0);
++#endif // CONFIG_P2P_PS
++#ifdef CONFIG_LPS_LCLK
++			if (pwrpriv->alives == 0)
++				rtw_set_rpwm(padapter, PS_STATE_S0);
++#else
++			rtw_set_rpwm(padapter, PS_STATE_S2);
++#endif
++#ifdef CONFIG_LPS_LCLK
++			_exit_pwrlock(&pwrpriv->lock);
++#endif
++		}
++		//else
++		//{
++		//	pwrpriv->pwr_mode = PS_MODE_ACTIVE;
++		//}
++	}
++
++_func_exit_;
++}
++
++
++//
++//	Description:
++//		Enter the leisure power save mode.
++//
++void LPS_Enter(PADAPTER padapter)
++{
++	struct pwrctrl_priv	*pwrpriv = &padapter->pwrctrlpriv;
++	struct mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
++	_adapter *buddy = padapter->pbuddy_adapter;
++
++_func_enter_;
++
++//	DBG_871X("+LeisurePSEnter\n");
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if (padapter->iface_type != IFACE_PORT0)
++		return; /* Skip power saving for concurrent mode port 1*/
++
++	/* consider buddy, if exist */
++	if (buddy) {
++		struct mlme_priv *b_pmlmepriv = &(buddy->mlmepriv);
++		#ifdef CONFIG_P2P
++		struct wifidirect_info *b_pwdinfo = &(buddy->wdinfo);
++		#ifdef CONFIG_IOCTL_CFG80211		
++		struct cfg80211_wifidirect_info *b_pcfg80211_wdinfo = &buddy->cfg80211_wdinfo;
++		#endif
++		#endif
++		
++		if (check_fwstate(b_pmlmepriv, WIFI_ASOC_STATE|WIFI_SITE_MONITOR)
++			|| check_fwstate(b_pmlmepriv, WIFI_UNDER_LINKING|WIFI_UNDER_WPS)
++			|| check_fwstate(b_pmlmepriv, WIFI_AP_STATE)
++			|| check_fwstate(b_pmlmepriv, WIFI_ADHOC_MASTER_STATE|WIFI_ADHOC_STATE)
++			#if defined(CONFIG_P2P) && defined(CONFIG_IOCTL_CFG80211) && defined(CONFIG_P2P_IPS)
++			|| b_pcfg80211_wdinfo->is_ro_ch
++			#elif defined(CONFIG_P2P)
++			|| !rtw_p2p_chk_state(b_pwdinfo, P2P_STATE_NONE)
++			#endif
++			|| rtw_is_scan_deny(buddy)
++		) {
++			return;
++		}
++	}
++#endif
++
++#ifdef CONFIG_INTEL_PROXIM
++	if(padapter->proximity.proxim_on==_TRUE){
++		return;
++	}
++#endif
++	if (	(check_fwstate(pmlmepriv, _FW_LINKED) == _FALSE) ||
++		(check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) ||
++		(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) ||
++		(check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE) ||
++		(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == _TRUE) )
++		return;
++
++	if(_TRUE == pwrpriv->bInSuspend )
++		return ;
++	
++	if (pwrpriv->bLeisurePs)
++	{
++		// Idle for a while if we connect to AP a while ago.
++		if(pwrpriv->LpsIdleCount >= 2) //  4 Sec 
++		{
++			if(pwrpriv->pwr_mode == PS_MODE_ACTIVE)
++			{
++				rtw_set_ps_mode(padapter, pwrpriv->power_mgnt, 2);
++			}	
++		}
++		else
++			pwrpriv->LpsIdleCount++;
++	}
++
++//	DBG_871X("-LeisurePSEnter\n");
++
++_func_exit_;
++}
++
++
++//
++//	Description:
++//		Leave the leisure power save mode.
++//
++void LPS_Leave(PADAPTER padapter)
++{
++#define LPS_LEAVE_TIMEOUT_MS 100
++
++	struct pwrctrl_priv	*pwrpriv = &padapter->pwrctrlpriv;
++	u32 start_time;
++	BOOLEAN bAwake = _FALSE;
++	
++_func_enter_;
++
++//	DBG_871X("+LeisurePSLeave\n");
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if (padapter->iface_type != IFACE_PORT0)
++		return; /* Skip power saving for concurrent mode port 1*/
++#endif
++
++	if (pwrpriv->bLeisurePs)
++	{	
++		if(pwrpriv->pwr_mode != PS_MODE_ACTIVE)
++		{
++			rtw_set_ps_mode(padapter, PS_MODE_ACTIVE, 0);
++
++			if(pwrpriv->pwr_mode == PS_MODE_ACTIVE)
++			{
++				start_time = rtw_get_current_time();		
++				while(1)			
++				{
++					rtw_hal_get_hwreg(padapter, HW_VAR_FWLPS_RF_ON, (u8 *)(&bAwake));
++						
++					if(bAwake || padapter->bSurpriseRemoved)
++						break;
++					
++					if(rtw_get_passing_time_ms(start_time)>LPS_LEAVE_TIMEOUT_MS)
++					{
++						DBG_871X("Wait for FW LPS leave more than %u ms!!!\n", LPS_LEAVE_TIMEOUT_MS);
++						break;
++					}
++					rtw_usleep_os(100);
++				}
++			}
++		}
++	}
++
++
++//	DBG_871X("-LeisurePSLeave\n");
++
++_func_exit_;
++}
++
++#endif
++
++//
++// Description: Leave all power save mode: LPS, FwLPS, IPS if needed.
++// Move code to function by tynli. 2010.03.26. 
++//
++void LeaveAllPowerSaveMode(IN PADAPTER Adapter)
++{
++	struct mlme_priv	*pmlmepriv = &(Adapter->mlmepriv);
++
++_func_enter_;
++
++	//DBG_871X("%s.....\n",__FUNCTION__);
++	if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
++	{ //connect
++#ifdef CONFIG_P2P_PS
++		p2p_ps_wk_cmd(Adapter, P2P_PS_DISABLE, 0);
++#endif // CONFIG_P2P_PS
++#ifdef CONFIG_LPS
++		//DBG_871X("==> leave LPS.......\n");
++		LPS_Leave(Adapter);
++#endif
++	}
++	else
++	{
++		if(Adapter->pwrctrlpriv.rf_pwrstate== rf_off)
++		{
++			#ifdef CONFIG_AUTOSUSPEND
++			if(Adapter->registrypriv.usbss_enable)
++			{
++				#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35))
++				usb_disable_autosuspend(adapter_to_dvobj(Adapter)->pusbdev);
++				#elif (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,22) && LINUX_VERSION_CODE<=KERNEL_VERSION(2,6,34))
++				adapter_to_dvobj(Adapter)->pusbdev->autosuspend_disabled = Adapter->bDisableAutosuspend;//autosuspend disabled by the user
++				#endif
++			}
++			else
++			#endif
++			{
++			/*
++				#ifdef CONFIG_IPS
++				if(_FALSE == ips_leave(Adapter))
++				{
++					DBG_871X("======> ips_leave fail.............\n");			
++				}
++				#endif
++			*/
++			}				
++		}	
++	}
++
++_func_exit_;
++}
++
++#ifdef CONFIG_LPS_LCLK
++/*
++ * Caller:ISR handler...
++ *
++ * This will be called when CPWM interrupt is up.
++ *
++ * using to update cpwn of drv; and drv willl make a decision to up or down pwr level
++ */
++void cpwm_int_hdl(
++	PADAPTER padapter,
++	struct reportpwrstate_parm *preportpwrstate)
++{
++	struct pwrctrl_priv *pwrpriv;
++
++
++_func_enter_;
++
++	pwrpriv = &padapter->pwrctrlpriv;
++#if 0
++	if (pwrpriv->cpwm_tog == (preportpwrstate->state & PS_TOGGLE)) {
++		RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_err_,
++				 ("cpwm_int_hdl: tog(old)=0x%02x cpwm(new)=0x%02x toggle bit didn't change!?\n",
++				  pwrpriv->cpwm_tog, preportpwrstate->state));
++		goto exit;
++	}
++#endif
++//	_enter_pwrlock(&pwrpriv->lock);
++
++	pwrpriv->cpwm = PS_STATE(preportpwrstate->state);
++	pwrpriv->cpwm_tog = preportpwrstate->state & PS_TOGGLE;
++
++	if (pwrpriv->cpwm >= PS_STATE_S2) {
++		if (pwrpriv->alives & CMD_ALIVE)
++			_rtw_up_sema(&padapter->cmdpriv.cmd_queue_sema);
++
++		if (pwrpriv->alives & XMIT_ALIVE)
++			_rtw_up_sema(&padapter->xmitpriv.xmit_sema);
++	}
++
++//	_exit_pwrlock(&pwrpriv->lock);
++
++exit:
++	RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_notice_,
++			 ("cpwm_int_hdl: cpwm=0x%02x\n", pwrpriv->cpwm));
++
++_func_exit_;
++}
++
++__inline static void register_task_alive(struct pwrctrl_priv *pwrctrl, u32 tag)
++{
++	pwrctrl->alives |= tag;
++}
++
++__inline static void unregister_task_alive(struct pwrctrl_priv *pwrctrl, u32 tag)
++{
++	pwrctrl->alives &= ~tag;
++}
++
++/*
++ * Caller: rtw_xmit_thread
++ * 
++ * Check if the fw_pwrstate is okay for xmit.
++ * If not (cpwm is less than S3), then the sub-routine
++ * will raise the cpwm to be greater than or equal to S3. 
++ *
++ * Calling Context: Passive
++ * 
++ * Return Value:
++ *	 _SUCCESS	rtw_xmit_thread can write fifo/txcmd afterwards.
++ *	 _FAIL		rtw_xmit_thread can not do anything.
++ */
++s32 rtw_register_tx_alive(PADAPTER padapter)
++{
++	s32 res;
++	struct pwrctrl_priv *pwrctrl;
++
++_func_enter_;
++
++	res = _SUCCESS;
++	pwrctrl = &padapter->pwrctrlpriv;
++
++	_enter_pwrlock(&pwrctrl->lock);
++
++	register_task_alive(pwrctrl, XMIT_ALIVE);
++
++	if (pwrctrl->bFwCurrentInPSMode == _TRUE)
++	{
++		RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_err_,
++				 ("rtw_register_tx_alive: cpwm=0x%02x alives=0x%08x\n",
++				  pwrctrl->cpwm, pwrctrl->alives));
++
++		if (pwrctrl->cpwm < PS_STATE_S2) {
++			if (pwrctrl->rpwm < PS_STATE_S2)
++				rtw_set_rpwm(padapter, PS_STATE_S2);
++			res = _FAIL;
++		}
++	}
++
++	_exit_pwrlock(&pwrctrl->lock);
++
++_func_exit_;
++
++	return res;	
++}
++
++/*
++ * Caller: rtw_cmd_thread
++ *
++ * Check if the fw_pwrstate is okay for issuing cmd.
++ * If not (cpwm should be is less than S2), then the sub-routine
++ * will raise the cpwm to be greater than or equal to S2.
++ *
++ * Calling Context: Passive
++ *
++ * Return Value:
++ *	_SUCCESS	rtw_cmd_thread can issue cmds to firmware afterwards.
++ *	_FAIL		rtw_cmd_thread can not do anything.
++ */
++s32 rtw_register_cmd_alive(PADAPTER padapter)
++{
++	s32 res;
++	struct pwrctrl_priv *pwrctrl;
++
++_func_enter_;
++
++	res = _SUCCESS;
++	pwrctrl = &padapter->pwrctrlpriv;
++
++	_enter_pwrlock(&pwrctrl->lock);
++
++	register_task_alive(pwrctrl, CMD_ALIVE);
++
++	if (pwrctrl->bFwCurrentInPSMode == _TRUE)
++	{
++		RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_notice_,
++				 ("rtw_register_cmd_alive: cpwm=0x%02x alives=0x%08x\n",
++				  pwrctrl->cpwm, pwrctrl->alives));
++
++		if (pwrctrl->cpwm < PS_STATE_S2) {
++			if (pwrctrl->rpwm < PS_STATE_S2)
++				rtw_set_rpwm(padapter, PS_STATE_S2);
++			res = _FAIL;
++		}
++	}
++
++	_exit_pwrlock(&pwrctrl->lock);
++
++_func_exit_;
++
++	return res;
++}
++
++/*
++ * Caller: rx_isr
++ *
++ * Calling Context: Dispatch/ISR
++ *
++ * Return Value:
++ *	_SUCCESS
++ *	_FAIL
++ */
++s32 rtw_register_rx_alive(PADAPTER padapter)
++{
++	struct pwrctrl_priv *pwrctrl;
++
++_func_enter_;
++
++	pwrctrl = &padapter->pwrctrlpriv;
++
++	_enter_pwrlock(&pwrctrl->lock);
++
++	register_task_alive(pwrctrl, RECV_ALIVE);
++	RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_notice_,
++			 ("rtw_register_rx_alive: cpwm=0x%02x alives=0x%08x\n",
++			  pwrctrl->cpwm, pwrctrl->alives));
++
++	_exit_pwrlock(&pwrctrl->lock);
++
++_func_exit_;
++
++	return _SUCCESS;
++}
++
++/*
++ * Caller: evt_isr or evt_thread
++ *
++ * Calling Context: Dispatch/ISR or Passive
++ *
++ * Return Value:
++ *	_SUCCESS
++ *	_FAIL
++ */
++s32 rtw_register_evt_alive(PADAPTER padapter)
++{
++	struct pwrctrl_priv *pwrctrl;
++
++_func_enter_;
++
++	pwrctrl = &padapter->pwrctrlpriv;
++
++	_enter_pwrlock(&pwrctrl->lock);
++
++	register_task_alive(pwrctrl, EVT_ALIVE);
++	RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_notice_,
++			 ("rtw_register_evt_alive: cpwm=0x%02x alives=0x%08x\n",
++			  pwrctrl->cpwm, pwrctrl->alives));
++
++	_exit_pwrlock(&pwrctrl->lock);
++
++_func_exit_;
++
++	return _SUCCESS;
++}
++
++/*
++ * Caller: ISR
++ *
++ * If ISR's txdone,
++ * No more pkts for TX,
++ * Then driver shall call this fun. to power down firmware again.
++ */
++void rtw_unregister_tx_alive(PADAPTER padapter)
++{
++	struct pwrctrl_priv *pwrctrl;
++
++_func_enter_;
++
++	pwrctrl = &padapter->pwrctrlpriv;
++
++	_enter_pwrlock(&pwrctrl->lock);
++
++	unregister_task_alive(pwrctrl, XMIT_ALIVE);
++
++	if ((pwrctrl->pwr_mode != PS_MODE_ACTIVE) &&
++		(pwrctrl->bFwCurrentInPSMode == _TRUE))
++	{
++		if ((pwrctrl->alives == 0) &&
++			(pwrctrl->cpwm > PS_STATE_S0))
++		{
++			rtw_set_rpwm(padapter, PS_STATE_S0);
++		}
++
++		RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_notice_,
++				 ("rtw_unregister_tx_alive: cpwm=0x%02x alives=0x%08x\n",
++				  pwrctrl->cpwm, pwrctrl->alives));
++	}
++
++	_exit_pwrlock(&pwrctrl->lock);
++
++_func_exit_;
++}
++
++/*
++ * Caller: ISR
++ *
++ * If all commands have been done,
++ * and no more command to do,
++ * then driver shall call this fun. to power down firmware again.
++ */
++void rtw_unregister_cmd_alive(PADAPTER padapter)
++{
++	struct pwrctrl_priv *pwrctrl;
++
++_func_enter_;
++
++	pwrctrl = &padapter->pwrctrlpriv;
++
++	_enter_pwrlock(&pwrctrl->lock);
++
++	unregister_task_alive(pwrctrl, CMD_ALIVE);
++
++	if ((pwrctrl->pwr_mode != PS_MODE_ACTIVE) &&
++		(pwrctrl->bFwCurrentInPSMode == _TRUE))
++	{
++		if ((pwrctrl->alives == 0) &&
++			(pwrctrl->cpwm > PS_STATE_S0))
++		{
++			rtw_set_rpwm(padapter, PS_STATE_S0);
++		}
++
++		RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_notice_,
++				 ("rtw_unregister_cmd_alive: cpwm=0x%02x alives=0x%08x\n",
++				  pwrctrl->cpwm, pwrctrl->alives));
++	}
++
++	_exit_pwrlock(&pwrctrl->lock);
++
++_func_exit_;
++}
++
++/*
++ * Caller: ISR
++ */
++void rtw_unregister_rx_alive(PADAPTER padapter)
++{
++	struct pwrctrl_priv *pwrctrl;
++
++_func_enter_;
++
++	pwrctrl = &padapter->pwrctrlpriv;
++
++	_enter_pwrlock(&pwrctrl->lock);
++
++	unregister_task_alive(pwrctrl, RECV_ALIVE);
++
++	RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_notice_,
++			 ("rtw_unregister_rx_alive: cpwm=0x%02x alives=0x%08x\n",
++			  pwrctrl->cpwm, pwrctrl->alives));
++
++	_exit_pwrlock(&pwrctrl->lock);
++
++_func_exit_;
++}
++
++void rtw_unregister_evt_alive(PADAPTER padapter)
++{
++	struct pwrctrl_priv *pwrctrl;
++
++_func_enter_;
++
++	pwrctrl = &padapter->pwrctrlpriv;
++
++	unregister_task_alive(pwrctrl, EVT_ALIVE);
++
++	RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_notice_,
++			 ("rtw_unregister_evt_alive: cpwm=0x%02x alives=0x%08x\n",
++			  pwrctrl->cpwm, pwrctrl->alives));
++
++	_exit_pwrlock(&pwrctrl->lock);
++
++_func_exit_;
++}
++#endif	/* CONFIG_LPS_LCLK */
++
++#ifdef CONFIG_RESUME_IN_WORKQUEUE
++static void resume_workitem_callback(struct work_struct *work);
++#endif //CONFIG_RESUME_IN_WORKQUEUE
++
++void rtw_init_pwrctrl_priv(PADAPTER padapter)
++{
++	struct pwrctrl_priv *pwrctrlpriv = &padapter->pwrctrlpriv;
++
++_func_enter_;
++
++#ifdef PLATFORM_WINDOWS
++	pwrctrlpriv->pnp_current_pwr_state=NdisDeviceStateD0;
++#endif
++
++	_init_pwrlock(&pwrctrlpriv->lock);
++	pwrctrlpriv->rf_pwrstate = rf_on;
++	pwrctrlpriv->ips_enter_cnts=0;
++	pwrctrlpriv->ips_leave_cnts=0;
++
++	pwrctrlpriv->ips_mode = padapter->registrypriv.ips_mode;
++	pwrctrlpriv->ips_mode_req = padapter->registrypriv.ips_mode;
++
++	pwrctrlpriv->pwr_state_check_interval = RTW_PWR_STATE_CHK_INTERVAL;
++	pwrctrlpriv->pwr_state_check_cnts = 0;
++	pwrctrlpriv->bInternalAutoSuspend = _FALSE;
++	pwrctrlpriv->bInSuspend = _FALSE;
++	pwrctrlpriv->bkeepfwalive = _FALSE;
++
++#ifdef CONFIG_AUTOSUSPEND
++#ifdef SUPPORT_HW_RFOFF_DETECTED
++	pwrctrlpriv->pwr_state_check_interval = (pwrctrlpriv->bHWPwrPindetect) ?1000:2000;		
++#endif
++#endif
++
++	pwrctrlpriv->LpsIdleCount = 0;
++	//pwrctrlpriv->FWCtrlPSMode =padapter->registrypriv.power_mgnt;// PS_MODE_MIN;
++	pwrctrlpriv->power_mgnt =padapter->registrypriv.power_mgnt;// PS_MODE_MIN;
++	pwrctrlpriv->bLeisurePs = (PS_MODE_ACTIVE != pwrctrlpriv->power_mgnt)?_TRUE:_FALSE;
++
++	pwrctrlpriv->bFwCurrentInPSMode = _FALSE;
++
++	pwrctrlpriv->cpwm = PS_STATE_S4;
++
++	pwrctrlpriv->pwr_mode = PS_MODE_ACTIVE;
++
++
++	pwrctrlpriv->smart_ps = 0;
++
++	pwrctrlpriv->tog = 0x80;
++
++#ifdef PLATFORM_LINUX
++	_init_timer(&(pwrctrlpriv->pwr_state_check_timer), padapter->pnetdev, pwr_state_check_handler, (u8 *)padapter);
++#endif
++
++	#ifdef CONFIG_RESUME_IN_WORKQUEUE
++	_init_workitem(&pwrctrlpriv->resume_work, resume_workitem_callback, NULL);
++	pwrctrlpriv->rtw_workqueue = create_singlethread_workqueue("rtw_workqueue");
++	#endif //CONFIG_RESUME_IN_WORKQUEUE
++
++	#if defined(CONFIG_HAS_EARLYSUSPEND) || defined(CONFIG_ANDROID_POWER)
++	pwrctrlpriv->early_suspend.suspend = NULL;
++	rtw_register_early_suspend(pwrctrlpriv);
++	#endif //CONFIG_HAS_EARLYSUSPEND || CONFIG_ANDROID_POWER
++
++
++_func_exit_;
++
++}
++
++
++void rtw_free_pwrctrl_priv(PADAPTER adapter)
++{
++	struct pwrctrl_priv *pwrctrlpriv = &adapter->pwrctrlpriv;
++
++_func_enter_;
++
++	//_rtw_memset((unsigned char *)pwrctrlpriv, 0, sizeof(struct pwrctrl_priv));
++
++
++	#ifdef CONFIG_RESUME_IN_WORKQUEUE
++	if (pwrctrlpriv->rtw_workqueue) { 
++		flush_workqueue(pwrctrlpriv->rtw_workqueue);
++		destroy_workqueue(pwrctrlpriv->rtw_workqueue);
++	}
++	#endif
++
++
++	#if defined(CONFIG_HAS_EARLYSUSPEND) || defined(CONFIG_ANDROID_POWER)
++	rtw_unregister_early_suspend(pwrctrlpriv);
++	#endif //CONFIG_HAS_EARLYSUSPEND || CONFIG_ANDROID_POWER
++
++	_free_pwrlock(&pwrctrlpriv->lock);
++
++_func_exit_;
++}
++
++#ifdef CONFIG_RESUME_IN_WORKQUEUE
++#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI)
++extern int rtw_resume_process(_adapter *padapter);
++#endif
++static void resume_workitem_callback(struct work_struct *work)
++{
++	struct pwrctrl_priv *pwrpriv = container_of(work, struct pwrctrl_priv, resume_work);
++	_adapter *adapter = container_of(pwrpriv, _adapter, pwrctrlpriv);
++
++	DBG_871X("%s\n",__FUNCTION__);
++
++	#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI)
++	rtw_resume_process(adapter);
++	#endif
++	
++}
++
++void rtw_resume_in_workqueue(struct pwrctrl_priv *pwrpriv)
++{
++	// accquire system's suspend lock preventing from falliing asleep while resume in workqueue
++	rtw_lock_suspend();
++	
++	#if 1
++	queue_work(pwrpriv->rtw_workqueue, &pwrpriv->resume_work);	
++	#else
++	_set_workitem(&pwrpriv->resume_work);
++	#endif
++}
++#endif //CONFIG_RESUME_IN_WORKQUEUE
++
++#if defined(CONFIG_HAS_EARLYSUSPEND) || defined(CONFIG_ANDROID_POWER)
++inline bool rtw_is_earlysuspend_registered(struct pwrctrl_priv *pwrpriv)
++{
++	return (pwrpriv->early_suspend.suspend) ? _TRUE : _FALSE;
++}
++
++inline bool rtw_is_do_late_resume(struct pwrctrl_priv *pwrpriv)
++{
++	return (pwrpriv->do_late_resume) ? _TRUE : _FALSE;
++}
++
++inline void rtw_set_do_late_resume(struct pwrctrl_priv *pwrpriv, bool enable)
++{
++	pwrpriv->do_late_resume = enable;
++}
++#endif
++
++#ifdef CONFIG_HAS_EARLYSUSPEND
++#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI)
++extern int rtw_resume_process(_adapter *padapter);
++#endif
++static void rtw_early_suspend(struct early_suspend *h)
++{
++	struct pwrctrl_priv *pwrpriv = container_of(h, struct pwrctrl_priv, early_suspend);
++	DBG_871X("%s\n",__FUNCTION__);
++
++	rtw_set_do_late_resume(pwrpriv, _FALSE);
++}
++
++static void rtw_late_resume(struct early_suspend *h)
++{
++	struct pwrctrl_priv *pwrpriv = container_of(h, struct pwrctrl_priv, early_suspend);
++	_adapter *adapter = container_of(pwrpriv, _adapter, pwrctrlpriv);
++
++	DBG_871X("%s\n",__FUNCTION__);
++	if(pwrpriv->do_late_resume) {
++		#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI)
++		rtw_set_do_late_resume(pwrpriv, _FALSE);
++		rtw_resume_process(adapter);
++		#endif
++	}
++}
++
++void rtw_register_early_suspend(struct pwrctrl_priv *pwrpriv)
++{
++	_adapter *adapter = container_of(pwrpriv, _adapter, pwrctrlpriv);
++
++#if defined(CONFIG_CONCURRENT_MODE)
++	if (adapter->adapter_type != PRIMARY_ADAPTER)
++		return;
++#endif	
++
++	DBG_871X("%s\n", __FUNCTION__);
++
++	//jeff: set the early suspend level before blank screen, so we wll do late resume after scree is lit
++	pwrpriv->early_suspend.level = EARLY_SUSPEND_LEVEL_BLANK_SCREEN - 20;
++	pwrpriv->early_suspend.suspend = rtw_early_suspend;
++	pwrpriv->early_suspend.resume = rtw_late_resume;
++	register_early_suspend(&pwrpriv->early_suspend);	
++
++	
++}
++
++void rtw_unregister_early_suspend(struct pwrctrl_priv *pwrpriv)
++{
++	_adapter *adapter = container_of(pwrpriv, _adapter, pwrctrlpriv);
++
++#if defined(CONFIG_CONCURRENT_MODE)
++	if (adapter->adapter_type != PRIMARY_ADAPTER)
++		return;
++#endif
++
++	DBG_871X("%s\n", __FUNCTION__);
++
++	rtw_set_do_late_resume(pwrpriv, _FALSE);
++
++	if (pwrpriv->early_suspend.suspend) 
++		unregister_early_suspend(&pwrpriv->early_suspend);
++
++	pwrpriv->early_suspend.suspend = NULL;
++	pwrpriv->early_suspend.resume = NULL;
++}
++#endif //CONFIG_HAS_EARLYSUSPEND
++
++#ifdef CONFIG_ANDROID_POWER
++#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI)
++extern int rtw_resume_process(PADAPTER padapter);
++#endif
++static void rtw_early_suspend(android_early_suspend_t *h)
++{
++	struct pwrctrl_priv *pwrpriv = container_of(h, struct pwrctrl_priv, early_suspend);
++	DBG_871X("%s\n",__FUNCTION__);
++
++	rtw_set_do_late_resume(pwrpriv, _FALSE);
++}
++
++static void rtw_late_resume(android_early_suspend_t *h)
++{
++	struct pwrctrl_priv *pwrpriv = container_of(h, struct pwrctrl_priv, early_suspend);
++	_adapter *adapter = container_of(pwrpriv, _adapter, pwrctrlpriv);
++
++	DBG_871X("%s\n",__FUNCTION__);
++	if(pwrpriv->do_late_resume) {
++		#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI)
++		rtw_set_do_late_resume(pwrpriv, _FALSE);
++		rtw_resume_process(adapter);
++		#endif
++	}
++}
++
++void rtw_register_early_suspend(struct pwrctrl_priv *pwrpriv)
++{
++	_adapter *adapter = container_of(pwrpriv, _adapter, pwrctrlpriv);
++
++#if defined(CONFIG_CONCURRENT_MODE)
++	if (adapter->adapter_type != PRIMARY_ADAPTER)
++		return;
++#endif
++
++	DBG_871X("%s\n", __FUNCTION__);
++
++	//jeff: set the early suspend level before blank screen, so we wll do late resume after scree is lit
++	pwrpriv->early_suspend.level = ANDROID_EARLY_SUSPEND_LEVEL_BLANK_SCREEN - 20;
++	pwrpriv->early_suspend.suspend = rtw_early_suspend;
++	pwrpriv->early_suspend.resume = rtw_late_resume;
++	android_register_early_suspend(&pwrpriv->early_suspend);	
++}
++
++void rtw_unregister_early_suspend(struct pwrctrl_priv *pwrpriv)
++{
++	_adapter *adapter = container_of(pwrpriv, _adapter, pwrctrlpriv);
++
++#if defined(CONFIG_CONCURRENT_MODE)
++	if (adapter->adapter_type != PRIMARY_ADAPTER)
++		return;
++#endif
++
++	DBG_871X("%s\n", __FUNCTION__);
++
++	rtw_set_do_late_resume(pwrpriv, _FALSE);
++
++	if (pwrpriv->early_suspend.suspend) 
++		android_unregister_early_suspend(&pwrpriv->early_suspend);
++
++	pwrpriv->early_suspend.suspend = NULL;
++	pwrpriv->early_suspend.resume = NULL;
++}
++#endif //CONFIG_ANDROID_POWER
++
++u8 rtw_interface_ps_func(_adapter *padapter,HAL_INTF_PS_FUNC efunc_id,u8* val)
++{
++	u8 bResult = _TRUE;
++
++	rtw_hal_intf_ps_func(padapter,efunc_id,val);
++
++	return bResult;
++}
++
++
++inline void rtw_set_ips_deny(_adapter *padapter, u32 ms)
++{
++	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
++	pwrpriv->ips_deny_time = rtw_get_current_time() + rtw_ms_to_systime(ms);
++}
++
++/*
++* rtw_pwr_wakeup - Wake the NIC up from: 1)IPS. 2)USB autosuspend
++* @adapter: pointer to _adapter structure
++* @ips_deffer_ms: the ms wiil prevent from falling into IPS after wakeup
++* Return _SUCCESS or _FAIL
++*/
++int _rtw_pwr_wakeup(_adapter *padapter, u32 ips_deffer_ms, const char *caller)
++{
++	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;	
++	int ret = _SUCCESS;
++	u32 start = rtw_get_current_time();
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if (padapter->pbuddy_adapter)
++		LeaveAllPowerSaveMode(padapter->pbuddy_adapter);
++
++	if ((padapter->isprimary == _FALSE) && padapter->pbuddy_adapter){
++		padapter = padapter->pbuddy_adapter;
++		pwrpriv = &padapter->pwrctrlpriv;
++		pmlmepriv = &padapter->mlmepriv;
++	}
++#endif
++
++	if (pwrpriv->ips_deny_time < rtw_get_current_time() + rtw_ms_to_systime(ips_deffer_ms))
++		pwrpriv->ips_deny_time = rtw_get_current_time() + rtw_ms_to_systime(ips_deffer_ms);
++
++	if (pwrpriv->ps_processing) {
++		DBG_871X("%s wait ps_processing...\n", __func__);
++		while (pwrpriv->ps_processing && rtw_get_passing_time_ms(start) <= 3000)
++			rtw_msleep_os(10);
++		if (pwrpriv->ps_processing)
++			DBG_871X("%s wait ps_processing timeout\n", __func__);
++		else
++			DBG_871X("%s wait ps_processing done\n", __func__);
++	}
++
++#ifdef DBG_CONFIG_ERROR_DETECT
++	if (rtw_hal_sreset_inprogress(padapter)) {
++		DBG_871X("%s wait sreset_inprogress...\n", __func__);
++		while (rtw_hal_sreset_inprogress(padapter) && rtw_get_passing_time_ms(start) <= 4000)
++			rtw_msleep_os(10);
++		if (rtw_hal_sreset_inprogress(padapter))
++			DBG_871X("%s wait sreset_inprogress timeout\n", __func__);
++		else
++			DBG_871X("%s wait sreset_inprogress done\n", __func__);
++	}
++#endif
++
++	if (pwrpriv->bInternalAutoSuspend == _FALSE && pwrpriv->bInSuspend) {
++		DBG_871X("%s wait bInSuspend...\n", __func__);
++		while (pwrpriv->bInSuspend 
++			&& ((rtw_get_passing_time_ms(start) <= 3000 && !rtw_is_do_late_resume(pwrpriv))
++				|| (rtw_get_passing_time_ms(start) <= 500 && rtw_is_do_late_resume(pwrpriv)))
++		) {
++			rtw_msleep_os(10);
++		}
++		if (pwrpriv->bInSuspend)
++			DBG_871X("%s wait bInSuspend timeout\n", __func__);
++		else
++			DBG_871X("%s wait bInSuspend done\n", __func__);
++	}
++
++	//System suspend is not allowed to wakeup
++	if((pwrpriv->bInternalAutoSuspend == _FALSE) && (_TRUE == pwrpriv->bInSuspend )){
++		ret = _FAIL;
++		goto exit;
++	}
++
++	//block???
++	if((pwrpriv->bInternalAutoSuspend == _TRUE)  && (padapter->net_closed == _TRUE)) {
++		ret = _FAIL;
++		goto exit;
++	}
++
++	//I think this should be check in IPS, LPS, autosuspend functions...
++	if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
++	{
++		ret = _SUCCESS;
++		goto exit;
++	}
++
++	if(rf_off == pwrpriv->rf_pwrstate )
++	{		
++#ifdef CONFIG_USB_HCI
++#ifdef CONFIG_AUTOSUSPEND
++		 if(pwrpriv->brfoffbyhw==_TRUE)
++		{
++			DBG_8192C("hw still in rf_off state ...........\n");
++			ret = _FAIL;
++			goto exit;
++		}
++		else if(padapter->registrypriv.usbss_enable)
++		{
++			DBG_8192C("%s call autoresume_enter....\n",__FUNCTION__);
++			if(_FAIL ==  autoresume_enter(padapter))
++			{
++				DBG_8192C("======> autoresume fail.............\n");
++				ret = _FAIL;
++				goto exit;
++			}	
++		}
++		else
++#endif
++#endif
++		{
++#ifdef CONFIG_IPS
++			DBG_8192C("%s call ips_leave....\n",__FUNCTION__);
++			if(_FAIL ==  ips_leave(padapter))
++			{
++				DBG_8192C("======> ips_leave fail.............\n");
++				ret = _FAIL;
++				goto exit;
++			}
++#endif
++		}
++	}
++
++	//TODO: the following checking need to be merged...
++	if(padapter->bDriverStopped
++		|| !padapter->bup
++		|| !padapter->hw_init_completed
++	){
++		DBG_8192C("%s: bDriverStopped=%d, bup=%d, hw_init_completed=%u\n"
++			, caller
++		   	, padapter->bDriverStopped
++		   	, padapter->bup
++		   	, padapter->hw_init_completed);
++		ret= _FALSE;
++		goto exit;
++	}
++
++exit:
++	if (pwrpriv->ips_deny_time < rtw_get_current_time() + rtw_ms_to_systime(ips_deffer_ms))
++		pwrpriv->ips_deny_time = rtw_get_current_time() + rtw_ms_to_systime(ips_deffer_ms);
++	return ret;
++
++}
++
++int rtw_pm_set_lps(_adapter *padapter, u8 mode)
++{
++	int	ret = 0;	
++	struct pwrctrl_priv *pwrctrlpriv = &padapter->pwrctrlpriv;
++	
++	if ( mode < PS_MODE_NUM )
++	{
++		if(pwrctrlpriv->power_mgnt !=mode)
++		{
++			if(PS_MODE_ACTIVE == mode)
++			{
++				LeaveAllPowerSaveMode(padapter);
++			}
++			else
++			{
++				pwrctrlpriv->LpsIdleCount = 2;
++			}
++			pwrctrlpriv->power_mgnt = mode;
++			pwrctrlpriv->bLeisurePs = (PS_MODE_ACTIVE != pwrctrlpriv->power_mgnt)?_TRUE:_FALSE;
++		}
++	}
++	else
++	{
++		ret = -EINVAL;
++	}
++
++	return ret;
++}
++
++int rtw_pm_set_ips(_adapter *padapter, u8 mode)
++{
++	struct pwrctrl_priv *pwrctrlpriv = &padapter->pwrctrlpriv;
++
++	if( mode == IPS_NORMAL || mode == IPS_LEVEL_2 ) {
++		rtw_ips_mode_req(pwrctrlpriv, mode);
++		DBG_871X("%s %s\n", __FUNCTION__, mode == IPS_NORMAL?"IPS_NORMAL":"IPS_LEVEL_2");
++		return 0;
++	} 
++	else if(mode ==IPS_NONE){
++		rtw_ips_mode_req(pwrctrlpriv, mode);
++		DBG_871X("%s %s\n", __FUNCTION__, "IPS_NONE");
++		if((padapter->bSurpriseRemoved ==0)&&(_FAIL == rtw_pwr_wakeup(padapter)) )
++			return -EFAULT;
++	}
++	else {
++		return -EINVAL;
++	}
++	return 0;
++}
++
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_recv.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_recv.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_recv.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_recv.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,4289 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _RTW_RECV_C_
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <recv_osdep.h>
++#include <mlme_osdep.h>
++#include <ip.h>
++#include <if_ether.h>
++#include <ethernet.h>
++
++#ifdef CONFIG_USB_HCI
++#include <usb_ops.h>
++#endif
++
++#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS)
++
++#error "Shall be Linux or Windows, but not both!\n"
++
++#endif
++
++#include <wifi.h>
++#include <circ_buf.h>
++
++#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS
++void rtw_signal_stat_timer_hdl(RTW_TIMER_HDL_ARGS);
++#endif //CONFIG_NEW_SIGNAL_STAT_PROCESS
++
++
++void _rtw_init_sta_recv_priv(struct sta_recv_priv *psta_recvpriv)
++{
++
++
++_func_enter_;
++
++	_rtw_memset((u8 *)psta_recvpriv, 0, sizeof (struct sta_recv_priv));
++
++	_rtw_spinlock_init(&psta_recvpriv->lock);
++
++	//for(i=0; i<MAX_RX_NUMBLKS; i++)
++	//	_rtw_init_queue(&psta_recvpriv->blk_strms[i]);
++
++	_rtw_init_queue(&psta_recvpriv->defrag_q);
++
++_func_exit_;
++
++}
++
++sint _rtw_init_recv_priv(struct recv_priv *precvpriv, _adapter *padapter)
++{
++	sint i;
++
++	union recv_frame *precvframe;
++
++	sint	res=_SUCCESS;
++
++_func_enter_;
++
++	// We don't need to memset padapter->XXX to zero, because adapter is allocated by rtw_zvmalloc().
++	//_rtw_memset((unsigned char *)precvpriv, 0, sizeof (struct  recv_priv));
++
++	_rtw_spinlock_init(&precvpriv->lock);
++
++	_rtw_init_queue(&precvpriv->free_recv_queue);
++	_rtw_init_queue(&precvpriv->recv_pending_queue);
++	_rtw_init_queue(&precvpriv->uc_swdec_pending_queue);
++
++	precvpriv->adapter = padapter;
++
++	precvpriv->free_recvframe_cnt = NR_RECVFRAME;
++
++	rtw_os_recv_resource_init(precvpriv, padapter);
++
++	precvpriv->pallocated_frame_buf = rtw_zvmalloc(NR_RECVFRAME * sizeof(union recv_frame) + RXFRAME_ALIGN_SZ);
++	
++	if(precvpriv->pallocated_frame_buf==NULL){
++		res= _FAIL;
++		goto exit;
++	}
++	//_rtw_memset(precvpriv->pallocated_frame_buf, 0, NR_RECVFRAME * sizeof(union recv_frame) + RXFRAME_ALIGN_SZ);
++
++	precvpriv->precv_frame_buf = (u8 *)N_BYTE_ALIGMENT((SIZE_PTR)(precvpriv->pallocated_frame_buf), RXFRAME_ALIGN_SZ);
++	//precvpriv->precv_frame_buf = precvpriv->pallocated_frame_buf + RXFRAME_ALIGN_SZ -
++	//						((SIZE_PTR) (precvpriv->pallocated_frame_buf) &(RXFRAME_ALIGN_SZ-1));
++
++	precvframe = (union recv_frame*) precvpriv->precv_frame_buf;
++
++
++	for(i=0; i < NR_RECVFRAME ; i++)
++	{
++		_rtw_init_listhead(&(precvframe->u.list));
++
++		rtw_list_insert_tail(&(precvframe->u.list), &(precvpriv->free_recv_queue.queue));
++
++		res = rtw_os_recv_resource_alloc(padapter, precvframe);
++
++		precvframe->u.hdr.adapter =padapter;
++		precvframe++;
++
++	}
++
++#ifdef CONFIG_USB_HCI
++
++	precvpriv->rx_pending_cnt=1;
++
++	_rtw_init_sema(&precvpriv->allrxreturnevt, 0);
++
++#endif
++
++	res = rtw_hal_init_recv_priv(padapter);
++
++	precvpriv->recvbuf_skb_alloc_fail_cnt = 0;
++	precvpriv->recvbuf_null_cnt = 0;
++	precvpriv->read_port_complete_EINPROGRESS_cnt = 0;
++	precvpriv->read_port_complete_other_urb_err_cnt = 0;
++
++#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS
++	#ifdef PLATFORM_LINUX
++	_init_timer(&precvpriv->signal_stat_timer, padapter->pnetdev, RTW_TIMER_HDL_NAME(signal_stat), padapter);
++	#elif defined(PLATFORM_OS_CE) || defined(PLATFORM_WINDOWS)
++	_init_timer(&precvpriv->signal_stat_timer, padapter->hndis_adapter, RTW_TIMER_HDL_NAME(signal_stat), padapter);
++	#endif
++
++	precvpriv->signal_stat_sampling_interval = 1000; //ms
++	//precvpriv->signal_stat_converging_constant = 5000; //ms
++
++	rtw_set_signal_stat_timer(precvpriv);
++#endif //CONFIG_NEW_SIGNAL_STAT_PROCESS
++
++exit:
++
++_func_exit_;
++
++	return res;
++
++}
++
++void rtw_mfree_recv_priv_lock(struct recv_priv *precvpriv);
++void rtw_mfree_recv_priv_lock(struct recv_priv *precvpriv)
++{
++	_rtw_spinlock_free(&precvpriv->lock);
++#ifdef CONFIG_RECV_THREAD_MODE	
++	_rtw_free_sema(&precvpriv->recv_sema);
++	_rtw_free_sema(&precvpriv->terminate_recvthread_sema);
++#endif
++
++	_rtw_spinlock_free(&precvpriv->free_recv_queue.lock);
++	_rtw_spinlock_free(&precvpriv->recv_pending_queue.lock);
++
++	_rtw_spinlock_free(&precvpriv->free_recv_buf_queue.lock);
++
++#ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX
++	_rtw_spinlock_free(&precvpriv->recv_buf_pending_queue.lock);
++#endif	// CONFIG_USE_USB_BUFFER_ALLOC_RX
++}
++
++void _rtw_free_recv_priv (struct recv_priv *precvpriv)
++{
++	_adapter	*padapter = precvpriv->adapter;
++
++_func_enter_;
++
++	rtw_free_uc_swdec_pending_queue(padapter);
++
++	rtw_mfree_recv_priv_lock(precvpriv);
++
++	rtw_os_recv_resource_free(precvpriv);
++
++	if(precvpriv->pallocated_frame_buf) {
++		rtw_vmfree(precvpriv->pallocated_frame_buf, NR_RECVFRAME * sizeof(union recv_frame) + RXFRAME_ALIGN_SZ);
++	}
++
++	rtw_hal_free_recv_priv(padapter);
++
++_func_exit_;
++
++}
++
++union recv_frame *_rtw_alloc_recvframe (_queue *pfree_recv_queue)
++{
++
++	union recv_frame  *precvframe;
++	_list	*plist, *phead;
++	_adapter *padapter;
++	struct recv_priv *precvpriv;
++_func_enter_;
++
++	if(_rtw_queue_empty(pfree_recv_queue) == _TRUE)
++	{
++		precvframe = NULL;
++	}
++	else
++	{
++		phead = get_list_head(pfree_recv_queue);
++
++		plist = get_next(phead);
++
++		precvframe = LIST_CONTAINOR(plist, union recv_frame, u);
++
++		rtw_list_delete(&precvframe->u.hdr.list);
++		padapter=precvframe->u.hdr.adapter;
++		if(padapter !=NULL){
++			precvpriv=&padapter->recvpriv;
++			if(pfree_recv_queue == &precvpriv->free_recv_queue)
++				precvpriv->free_recvframe_cnt--;
++		}
++	}
++
++_func_exit_;
++
++	return precvframe;
++
++}
++
++union recv_frame *rtw_alloc_recvframe (_queue *pfree_recv_queue)
++{
++	_irqL irqL;
++	union recv_frame  *precvframe;
++	
++	_enter_critical_bh(&pfree_recv_queue->lock, &irqL);
++
++	precvframe = _rtw_alloc_recvframe(pfree_recv_queue);
++
++	_exit_critical_bh(&pfree_recv_queue->lock, &irqL);
++
++	return precvframe;
++}
++
++void rtw_init_recvframe(union recv_frame *precvframe, struct recv_priv *precvpriv)
++{
++	/* Perry: This can be removed */
++	_rtw_init_listhead(&precvframe->u.hdr.list);
++
++	precvframe->u.hdr.len=0;
++}
++
++int rtw_free_recvframe(union recv_frame *precvframe, _queue *pfree_recv_queue)
++{
++	_irqL irqL;
++	_adapter *padapter=precvframe->u.hdr.adapter;
++	struct recv_priv *precvpriv = &padapter->recvpriv;
++
++_func_enter_;
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if(padapter->adapter_type > PRIMARY_ADAPTER)
++	{
++		padapter = padapter->pbuddy_adapter;//get primary_padapter
++		precvpriv = &padapter->recvpriv;
++		pfree_recv_queue = &precvpriv->free_recv_queue;
++		precvframe->u.hdr.adapter = padapter;		
++	}	
++#endif
++
++
++#ifdef PLATFORM_WINDOWS
++	rtw_os_read_port(padapter, precvframe->u.hdr.precvbuf);
++#endif
++
++#if defined(PLATFORM_LINUX) || defined(PLATFORM_FREEBSD)
++
++	if(precvframe->u.hdr.pkt)
++	{
++#ifdef CONFIG_BSD_RX_USE_MBUF
++		m_freem(precvframe->u.hdr.pkt);
++#else	// CONFIG_BSD_RX_USE_MBUF
++		rtw_skb_free(precvframe->u.hdr.pkt);//free skb by driver
++#endif	// CONFIG_BSD_RX_USE_MBUF
++		precvframe->u.hdr.pkt = NULL;
++	}
++
++#endif //defined(PLATFORM_LINUX) || defined(PLATFORM_FREEBSD)
++
++	_enter_critical_bh(&pfree_recv_queue->lock, &irqL);
++
++	rtw_list_delete(&(precvframe->u.hdr.list));
++
++	rtw_list_insert_tail(&(precvframe->u.hdr.list), get_list_head(pfree_recv_queue));
++
++	if(padapter !=NULL){
++		if(pfree_recv_queue == &precvpriv->free_recv_queue)
++				precvpriv->free_recvframe_cnt++;
++	}
++
++      _exit_critical_bh(&pfree_recv_queue->lock, &irqL);
++
++_func_exit_;
++
++	return _SUCCESS;
++
++}
++
++
++
++
++sint _rtw_enqueue_recvframe(union recv_frame *precvframe, _queue *queue)
++{
++
++	_adapter *padapter=precvframe->u.hdr.adapter;
++	struct recv_priv *precvpriv = &padapter->recvpriv;
++
++_func_enter_;
++
++	//_rtw_init_listhead(&(precvframe->u.hdr.list));
++	rtw_list_delete(&(precvframe->u.hdr.list));
++
++
++	rtw_list_insert_tail(&(precvframe->u.hdr.list), get_list_head(queue));
++
++	if (padapter != NULL) {
++		if (queue == &precvpriv->free_recv_queue)
++			precvpriv->free_recvframe_cnt++;
++	}
++
++_func_exit_;
++
++	return _SUCCESS;
++}
++
++sint rtw_enqueue_recvframe(union recv_frame *precvframe, _queue *queue)
++{
++	sint ret;
++	_irqL irqL;
++	
++	//_spinlock(&pfree_recv_queue->lock);
++	_enter_critical_bh(&queue->lock, &irqL);
++	ret = _rtw_enqueue_recvframe(precvframe, queue);
++	//_rtw_spinunlock(&pfree_recv_queue->lock);
++	_exit_critical_bh(&queue->lock, &irqL);
++
++	return ret;
++}
++
++/*
++sint	rtw_enqueue_recvframe(union recv_frame *precvframe, _queue *queue)
++{
++	return rtw_free_recvframe(precvframe, queue);
++}
++*/
++
++
++
++
++/*
++caller : defrag ; recvframe_chk_defrag in recv_thread  (passive)
++pframequeue: defrag_queue : will be accessed in recv_thread  (passive)
++
++using spinlock to protect
++
++*/
++
++void rtw_free_recvframe_queue(_queue *pframequeue,  _queue *pfree_recv_queue)
++{
++	union	recv_frame 	*precvframe;
++	_list	*plist, *phead;
++
++_func_enter_;
++	_rtw_spinlock(&pframequeue->lock);
++
++	phead = get_list_head(pframequeue);
++	plist = get_next(phead);
++
++	while(rtw_end_of_queue_search(phead, plist) == _FALSE)
++	{
++		precvframe = LIST_CONTAINOR(plist, union recv_frame, u);
++
++		plist = get_next(plist);
++
++		//rtw_list_delete(&precvframe->u.hdr.list); // will do this in rtw_free_recvframe()
++
++		rtw_free_recvframe(precvframe, pfree_recv_queue);
++	}
++
++	_rtw_spinunlock(&pframequeue->lock);
++
++_func_exit_;
++
++}
++
++u32 rtw_free_uc_swdec_pending_queue(_adapter *adapter)
++{
++	u32 cnt = 0;
++	union recv_frame *pending_frame;
++	while((pending_frame=rtw_alloc_recvframe(&adapter->recvpriv.uc_swdec_pending_queue))) {
++		rtw_free_recvframe(pending_frame, &adapter->recvpriv.free_recv_queue);
++		DBG_871X("%s: dequeue uc_swdec_pending_queue\n", __func__);
++		cnt++;
++	}
++
++	return cnt;
++}
++
++
++sint rtw_enqueue_recvbuf_to_head(struct recv_buf *precvbuf, _queue *queue)
++{
++	_irqL irqL;
++
++	_enter_critical(&queue->lock, &irqL);
++
++	rtw_list_delete(&precvbuf->list);
++	rtw_list_insert_head(&precvbuf->list, get_list_head(queue));
++
++	_exit_critical(&queue->lock, &irqL);
++
++	return _SUCCESS;
++}
++
++sint rtw_enqueue_recvbuf(struct recv_buf *precvbuf, _queue *queue)
++{
++	_irqL irqL;	
++
++	_enter_critical(&queue->lock, &irqL);
++
++	rtw_list_delete(&precvbuf->list);
++
++	rtw_list_insert_tail(&precvbuf->list, get_list_head(queue));
++	
++	_exit_critical(&queue->lock, &irqL);
++
++
++	return _SUCCESS;
++	
++}
++
++struct recv_buf *rtw_dequeue_recvbuf (_queue *queue)
++{
++	_irqL irqL;
++	struct recv_buf *precvbuf;
++	_list	*plist, *phead;	
++
++	_enter_critical(&queue->lock, &irqL);
++
++	if(_rtw_queue_empty(queue) == _TRUE)
++	{
++		precvbuf = NULL;
++	}
++	else
++	{
++		phead = get_list_head(queue);
++
++		plist = get_next(phead);
++
++		precvbuf = LIST_CONTAINOR(plist, struct recv_buf, list);
++
++		rtw_list_delete(&precvbuf->list);
++		
++	}
++
++	_exit_critical(&queue->lock, &irqL);
++
++
++	return precvbuf;
++
++}
++
++sint recvframe_chkmic(_adapter *adapter,  union recv_frame *precvframe);
++sint recvframe_chkmic(_adapter *adapter,  union recv_frame *precvframe){
++
++	sint	i,res=_SUCCESS;
++	u32	datalen;
++	u8	miccode[8];
++	u8	bmic_err=_FALSE,brpt_micerror = _TRUE;
++	u8	*pframe, *payload,*pframemic;
++	u8	*mickey;
++	//u8	*iv,rxdata_key_idx=0;
++	struct	sta_info		*stainfo;
++	struct	rx_pkt_attrib	*prxattrib=&precvframe->u.hdr.attrib;
++	struct 	security_priv	*psecuritypriv=&adapter->securitypriv;
++
++	struct mlme_ext_priv	*pmlmeext = &adapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++_func_enter_;
++
++	stainfo=rtw_get_stainfo(&adapter->stapriv ,&prxattrib->ta[0]);
++
++	if(prxattrib->encrypt ==_TKIP_)
++	{
++		RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("\n recvframe_chkmic:prxattrib->encrypt ==_TKIP_\n"));
++		RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("\n recvframe_chkmic:da=0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x\n",
++			prxattrib->ra[0],prxattrib->ra[1],prxattrib->ra[2],prxattrib->ra[3],prxattrib->ra[4],prxattrib->ra[5]));
++
++		//calculate mic code
++		if(stainfo!= NULL)
++		{
++			if(IS_MCAST(prxattrib->ra))
++			{
++				//mickey=&psecuritypriv->dot118021XGrprxmickey.skey[0];
++				//iv = precvframe->u.hdr.rx_data+prxattrib->hdrlen;
++				//rxdata_key_idx =( ((iv[3])>>6)&0x3) ;
++				mickey=&psecuritypriv->dot118021XGrprxmickey[prxattrib->key_index].skey[0];
++				
++				RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("\n recvframe_chkmic: bcmc key \n"));
++				//DBG_871X("\n recvframe_chkmic: bcmc key psecuritypriv->dot118021XGrpKeyid(%d),pmlmeinfo->key_index(%d) ,recv key_id(%d)\n",
++				//								psecuritypriv->dot118021XGrpKeyid,pmlmeinfo->key_index,rxdata_key_idx);
++				
++				if(psecuritypriv->binstallGrpkey==_FALSE)
++				{
++					res=_FAIL;
++					RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("\n recvframe_chkmic:didn't install group key!!!!!!!!!!\n"));
++					DBG_871X("\n recvframe_chkmic:didn't install group key!!!!!!!!!!\n");
++					goto exit;
++				}
++			}
++			else{
++				mickey=&stainfo->dot11tkiprxmickey.skey[0];
++				RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("\n recvframe_chkmic: unicast key \n"));
++			}
++
++			datalen=precvframe->u.hdr.len-prxattrib->hdrlen-prxattrib->iv_len-prxattrib->icv_len-8;//icv_len included the mic code
++			pframe=precvframe->u.hdr.rx_data;
++			payload=pframe+prxattrib->hdrlen+prxattrib->iv_len;
++
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("\n prxattrib->iv_len=%d prxattrib->icv_len=%d\n",prxattrib->iv_len,prxattrib->icv_len));
++
++			//rtw_seccalctkipmic(&stainfo->dot11tkiprxmickey.skey[0],pframe,payload, datalen ,&miccode[0],(unsigned char)prxattrib->priority); //care the length of the data
++
++			rtw_seccalctkipmic(mickey,pframe,payload, datalen ,&miccode[0],(unsigned char)prxattrib->priority); //care the length of the data
++
++			pframemic=payload+datalen;
++
++			bmic_err=_FALSE;
++
++			for(i=0;i<8;i++){
++				if(miccode[i] != *(pframemic+i)){
++					RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("recvframe_chkmic:miccode[%d](%02x) != *(pframemic+%d)(%02x) ",i,miccode[i],i,*(pframemic+i)));
++					bmic_err=_TRUE;
++				}
++			}
++
++
++			if(bmic_err==_TRUE){
++
++				RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("\n *(pframemic-8)-*(pframemic-1)=0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x\n",
++					*(pframemic-8),*(pframemic-7),*(pframemic-6),*(pframemic-5),*(pframemic-4),*(pframemic-3),*(pframemic-2),*(pframemic-1)));
++				RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("\n *(pframemic-16)-*(pframemic-9)=0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x\n",
++					*(pframemic-16),*(pframemic-15),*(pframemic-14),*(pframemic-13),*(pframemic-12),*(pframemic-11),*(pframemic-10),*(pframemic-9)));
++
++				{
++					uint i;
++					RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("\n ======demp packet (len=%d)======\n",precvframe->u.hdr.len));
++					for(i=0;i<precvframe->u.hdr.len;i=i+8){
++						RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x",
++							*(precvframe->u.hdr.rx_data+i),*(precvframe->u.hdr.rx_data+i+1),
++							*(precvframe->u.hdr.rx_data+i+2),*(precvframe->u.hdr.rx_data+i+3),
++							*(precvframe->u.hdr.rx_data+i+4),*(precvframe->u.hdr.rx_data+i+5),
++							*(precvframe->u.hdr.rx_data+i+6),*(precvframe->u.hdr.rx_data+i+7)));
++					}
++					RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("\n ======demp packet end [len=%d]======\n",precvframe->u.hdr.len));
++					RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("\n hrdlen=%d, \n",prxattrib->hdrlen));
++				}
++
++				RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("ra=0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x psecuritypriv->binstallGrpkey=%d ",
++					prxattrib->ra[0],prxattrib->ra[1],prxattrib->ra[2],
++					prxattrib->ra[3],prxattrib->ra[4],prxattrib->ra[5],psecuritypriv->binstallGrpkey));
++
++				// double check key_index for some timing issue ,
++				// cannot compare with psecuritypriv->dot118021XGrpKeyid also cause timing issue
++				if((IS_MCAST(prxattrib->ra)==_TRUE)  && (prxattrib->key_index != pmlmeinfo->key_index ))
++					brpt_micerror = _FALSE;
++				
++				if(brpt_micerror == _TRUE)
++				{
++					rtw_handle_tkip_mic_err(adapter,(u8)IS_MCAST(prxattrib->ra));
++					RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,(" mic error :prxattrib->bdecrypted=%d \n", brpt_micerror));
++					DBG_871X(" mic error :brpt_micerror=%d\n", brpt_micerror);
++				}
++
++				res=_FAIL;
++
++			}
++			else{
++				//mic checked ok
++				if((psecuritypriv->bcheck_grpkey ==_FALSE)&&(IS_MCAST(prxattrib->ra)==_TRUE)){
++					psecuritypriv->bcheck_grpkey =_TRUE;
++					RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("psecuritypriv->bcheck_grpkey =_TRUE"));
++				}
++			}
++
++		}
++		else
++		{
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("recvframe_chkmic: rtw_get_stainfo==NULL!!!\n"));
++		}
++
++		recvframe_pull_tail(precvframe, 8);
++
++	}
++
++exit:
++
++_func_exit_;
++
++	return res;
++
++}
++
++//decrypt and set the ivlen,icvlen of the recv_frame
++union recv_frame * decryptor(_adapter *padapter,union recv_frame *precv_frame);
++union recv_frame * decryptor(_adapter *padapter,union recv_frame *precv_frame)
++{
++
++	struct rx_pkt_attrib *prxattrib = &precv_frame->u.hdr.attrib;
++	struct security_priv *psecuritypriv=&padapter->securitypriv;
++	union recv_frame *return_packet=precv_frame;
++	u32	 res=_SUCCESS;
++_func_enter_;
++
++	RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("prxstat->decrypted=%x prxattrib->encrypt = 0x%03x\n",prxattrib->bdecrypted,prxattrib->encrypt));
++
++	if(prxattrib->encrypt>0)
++	{
++		u8 *iv = precv_frame->u.hdr.rx_data+prxattrib->hdrlen;
++		prxattrib->key_index = ( ((iv[3])>>6)&0x3) ;
++
++		if(prxattrib->key_index > WEP_KEYS)
++		{
++			DBG_871X("prxattrib->key_index(%d) > WEP_KEYS \n", prxattrib->key_index);
++
++			switch(prxattrib->encrypt){
++				case _WEP40_:
++				case _WEP104_:
++					prxattrib->key_index = psecuritypriv->dot11PrivacyKeyIndex;
++					break;
++				case _TKIP_:			
++				case _AES_:						
++				default:
++					prxattrib->key_index = psecuritypriv->dot118021XGrpKeyid;
++					break;
++			}	
++		}			
++	}
++
++	if((prxattrib->encrypt>0) && ((prxattrib->bdecrypted==0) ||(psecuritypriv->sw_decrypt==_TRUE)))
++	{
++
++#ifdef CONFIG_CONCURRENT_MODE
++		if(!IS_MCAST(prxattrib->ra))//bc/mc packets use sw decryption for concurrent mode
++#endif			
++		psecuritypriv->hw_decrypted=_FALSE;
++
++		#ifdef DBG_RX_DECRYPTOR
++		DBG_871X("prxstat->bdecrypted:%d,  prxattrib->encrypt:%d,  Setting psecuritypriv->hw_decrypted = %d\n"
++			, prxattrib->bdecrypted ,prxattrib->encrypt, psecuritypriv->hw_decrypted);
++		#endif
++
++		switch(prxattrib->encrypt){
++		case _WEP40_:
++		case _WEP104_:
++			rtw_wep_decrypt(padapter, (u8 *)precv_frame);
++			break;
++		case _TKIP_:
++			res = rtw_tkip_decrypt(padapter, (u8 *)precv_frame);
++			break;
++		case _AES_:
++			res = rtw_aes_decrypt(padapter, (u8 * )precv_frame);
++			break;
++		default:
++				break;
++		}
++	}
++	else if(prxattrib->bdecrypted==1
++		&& prxattrib->encrypt >0
++		&& (psecuritypriv->busetkipkey==1 || prxattrib->encrypt !=_TKIP_ )
++		)
++	{
++#if 0
++		if((prxstat->icv==1)&&(prxattrib->encrypt!=_AES_))
++		{
++			psecuritypriv->hw_decrypted=_FALSE;
++
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("psecuritypriv->hw_decrypted=_FALSE"));
++
++			rtw_free_recvframe(precv_frame, &padapter->recvpriv.free_recv_queue);
++
++			return_packet=NULL;
++
++		}
++		else
++#endif
++		{
++			psecuritypriv->hw_decrypted=_TRUE;
++			#ifdef DBG_RX_DECRYPTOR
++			DBG_871X("prxstat->bdecrypted:%d,  prxattrib->encrypt:%d,  Setting psecuritypriv->hw_decrypted = %d\n"
++			, prxattrib->bdecrypted ,prxattrib->encrypt, psecuritypriv->hw_decrypted);
++			#endif
++
++		}
++	}
++	else {
++		#ifdef DBG_RX_DECRYPTOR
++		DBG_871X("prxstat->bdecrypted:%d,  prxattrib->encrypt:%d,  psecuritypriv->hw_decrypted:%d\n"
++		, prxattrib->bdecrypted ,prxattrib->encrypt, psecuritypriv->hw_decrypted);
++		#endif
++	}
++	
++	if(res == _FAIL)
++	{
++		rtw_free_recvframe(return_packet,&padapter->recvpriv.free_recv_queue);			
++		return_packet = NULL;
++		
++	}
++	//recvframe_chkmic(adapter, precv_frame);   //move to recvframme_defrag function
++	
++_func_exit_;
++
++	return return_packet;
++
++}
++//###set the security information in the recv_frame
++union recv_frame * portctrl(_adapter *adapter,union recv_frame * precv_frame);
++union recv_frame * portctrl(_adapter *adapter,union recv_frame * precv_frame)
++{
++	u8   *psta_addr,*ptr;
++	uint  auth_alg;
++	struct recv_frame_hdr *pfhdr;
++	struct sta_info * psta;
++	struct sta_priv *pstapriv ;
++	union recv_frame * prtnframe;
++	u16	ether_type=0;
++	u16  eapol_type = 0x888e;//for Funia BD's WPA issue  
++	struct rx_pkt_attrib *pattrib = & precv_frame->u.hdr.attrib;
++
++_func_enter_;
++
++	pstapriv = &adapter->stapriv;
++	ptr = get_recvframe_data(precv_frame);
++	pfhdr = &precv_frame->u.hdr;
++	psta_addr = pfhdr->attrib.ta;
++	psta = rtw_get_stainfo(pstapriv, psta_addr);
++
++	auth_alg = adapter->securitypriv.dot11AuthAlgrthm;
++
++	RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("########portctrl:adapter->securitypriv.dot11AuthAlgrthm= 0x%d\n",adapter->securitypriv.dot11AuthAlgrthm));
++
++	if(auth_alg==2)
++	{
++		if ((psta!=NULL) && (psta->ieee8021x_blocked))
++		{
++			//blocked
++			//only accept EAPOL frame
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("########portctrl:psta->ieee8021x_blocked==1\n"));
++
++			prtnframe=precv_frame;
++
++			//get ether_type
++			ptr=ptr+pfhdr->attrib.hdrlen+pfhdr->attrib.iv_len+LLC_HEADER_SIZE;
++			_rtw_memcpy(&ether_type,ptr, 2);
++			ether_type= ntohs((unsigned short )ether_type);
++
++		        if (ether_type == eapol_type) {
++				prtnframe=precv_frame;
++			}
++			else {
++				//free this frame
++				rtw_free_recvframe(precv_frame, &adapter->recvpriv.free_recv_queue);
++				prtnframe=NULL;
++			}
++		}
++		else
++		{
++			//allowed
++			//check decryption status, and decrypt the frame if needed
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("########portctrl:psta->ieee8021x_blocked==0\n"));
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("portctrl:precv_frame->hdr.attrib.privacy=%x\n",precv_frame->u.hdr.attrib.privacy));
++
++			if(pattrib->bdecrypted==0)
++				RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("portctrl:prxstat->decrypted=%x\n", pattrib->bdecrypted));
++
++			prtnframe=precv_frame;
++			//check is the EAPOL frame or not (Rekey)
++			if(ether_type == eapol_type){
++
++				RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("########portctrl:ether_type == 0x888e\n"));
++				//check Rekey
++
++				prtnframe=precv_frame;
++			}
++			else{
++				RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("########portctrl:ether_type = 0x%.4x\n",ether_type));
++			}
++		}
++	}
++	else
++	{
++		prtnframe=precv_frame;
++	}
++
++_func_exit_;
++
++		return prtnframe;
++
++}
++
++sint recv_decache(union recv_frame *precv_frame, u8 bretry, struct stainfo_rxcache *prxcache);
++sint recv_decache(union recv_frame *precv_frame, u8 bretry, struct stainfo_rxcache *prxcache)
++{
++	sint tid = precv_frame->u.hdr.attrib.priority;
++
++	u16 seq_ctrl = ( (precv_frame->u.hdr.attrib.seq_num&0xffff) << 4) |
++		(precv_frame->u.hdr.attrib.frag_num & 0xf);
++
++_func_enter_;
++
++	if(tid>15)
++	{
++		RT_TRACE(_module_rtl871x_recv_c_, _drv_notice_, ("recv_decache, (tid>15)! seq_ctrl=0x%x, tid=0x%x\n", seq_ctrl, tid));
++
++		return _FAIL;
++	}
++
++	if(1)//if(bretry)
++	{
++		if(seq_ctrl == prxcache->tid_rxseq[tid])
++		{
++			RT_TRACE(_module_rtl871x_recv_c_, _drv_notice_, ("recv_decache, seq_ctrl=0x%x, tid=0x%x, tid_rxseq=0x%x\n", seq_ctrl, tid, prxcache->tid_rxseq[tid]));
++
++			return _FAIL;
++		}
++	}
++
++	prxcache->tid_rxseq[tid] = seq_ctrl;
++
++_func_exit_;
++
++	return _SUCCESS;
++
++}
++
++void process_pwrbit_data(_adapter *padapter, union recv_frame *precv_frame);
++void process_pwrbit_data(_adapter *padapter, union recv_frame *precv_frame)
++{
++#ifdef CONFIG_AP_MODE
++	unsigned char pwrbit;
++	u8 *ptr = precv_frame->u.hdr.rx_data;
++	struct rx_pkt_attrib *pattrib = &precv_frame->u.hdr.attrib;
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	struct sta_info *psta=NULL;
++
++	psta = rtw_get_stainfo(pstapriv, pattrib->src);
++
++	pwrbit = GetPwrMgt(ptr);
++
++	if(psta)
++	{
++		if(pwrbit)
++		{
++			if(!(psta->state & WIFI_SLEEP_STATE))
++			{
++				//psta->state |= WIFI_SLEEP_STATE;
++				//pstapriv->sta_dz_bitmap |= BIT(psta->aid);
++
++				stop_sta_xmit(padapter, psta);
++
++				//DBG_871X("to sleep, sta_dz_bitmap=%x\n", pstapriv->sta_dz_bitmap);
++			}
++		}
++		else
++		{
++			if(psta->state & WIFI_SLEEP_STATE)
++			{
++				//psta->state ^= WIFI_SLEEP_STATE;
++				//pstapriv->sta_dz_bitmap &= ~BIT(psta->aid);				
++
++				wakeup_sta_to_xmit(padapter, psta);
++
++				//DBG_871X("to wakeup, sta_dz_bitmap=%x\n", pstapriv->sta_dz_bitmap);
++			}
++		}
++
++	}
++
++#endif
++}
++
++void process_wmmps_data(_adapter *padapter, union recv_frame *precv_frame);
++void process_wmmps_data(_adapter *padapter, union recv_frame *precv_frame)
++{
++#ifdef CONFIG_AP_MODE		
++	struct rx_pkt_attrib *pattrib = &precv_frame->u.hdr.attrib;
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	struct sta_info *psta=NULL;
++
++	psta = rtw_get_stainfo(pstapriv, pattrib->src);
++	
++	if(!psta) return;
++
++#ifdef CONFIG_TDLS
++	if( !(psta->tdls_sta_state & TDLS_LINKED_STATE ) )
++	{
++#endif //CONFIG_TDLS
++
++	if(!psta->qos_option)
++		return;
++
++	if(!(psta->qos_info&0xf))
++		return;
++		
++#ifdef CONFIG_TDLS
++	}
++#endif //CONFIG_TDLS	
++
++	if(psta->state&WIFI_SLEEP_STATE)
++	{
++		u8 wmmps_ac=0;	
++		
++		switch(pattrib->priority)
++		{
++			case 1:
++			case 2:
++				wmmps_ac = psta->uapsd_bk&BIT(1);
++				break;
++			case 4:
++			case 5:
++				wmmps_ac = psta->uapsd_vi&BIT(1);
++				break;
++			case 6:
++			case 7:
++				wmmps_ac = psta->uapsd_vo&BIT(1);
++				break;
++			case 0:
++			case 3:
++			default:
++				wmmps_ac = psta->uapsd_be&BIT(1);
++				break;	
++		}
++
++		if(wmmps_ac)
++		{
++			if(psta->sleepq_ac_len>0)
++			{
++				//process received triggered frame
++				xmit_delivery_enabled_frames(padapter, psta);
++			}
++			else
++			{
++				//issue one qos null frame with More data bit = 0 and the EOSP bit set (=1)
++				issue_qos_nulldata(padapter, psta->hwaddr, (u16)pattrib->priority, 0, 0);
++			}
++		}
++				
++	}
++
++	
++#endif	
++
++}
++
++#ifdef CONFIG_TDLS
++sint OnTDLS(_adapter *adapter, union recv_frame *precv_frame)
++{
++	struct rx_pkt_attrib	*pattrib = & precv_frame->u.hdr.attrib;
++	sint ret = _SUCCESS;
++	u8 *paction = get_recvframe_data(precv_frame);
++	u8 category_field = 1;
++#ifdef CONFIG_WFD
++	u8 WFA_OUI[3] = { 0x50, 0x6f, 0x9a };
++#endif //CONFIG_WFD
++	struct tdls_info *ptdlsinfo = &(adapter->tdlsinfo);
++
++	//point to action field
++	paction+=pattrib->hdrlen 
++			+ pattrib->iv_len 
++			+ SNAP_SIZE 
++			+ ETH_TYPE_LEN 
++			+ PAYLOAD_TYPE_LEN 
++			+ category_field;
++
++	if(ptdlsinfo->enable == 0)
++	{
++		DBG_871X("recv tdls frame, "
++				"but tdls haven't enabled\n");
++		ret = _FAIL;
++		return ret;
++	}
++	
++	switch(*paction){
++		case TDLS_SETUP_REQUEST:
++			DBG_871X("recv tdls setup request frame\n");
++			ret=On_TDLS_Setup_Req(adapter, precv_frame);
++			break;
++		case TDLS_SETUP_RESPONSE:
++			DBG_871X("recv tdls setup response frame\n");			
++			ret=On_TDLS_Setup_Rsp(adapter, precv_frame);
++			break;
++		case TDLS_SETUP_CONFIRM:
++			DBG_871X("recv tdls setup confirm frame\n");
++			ret=On_TDLS_Setup_Cfm(adapter, precv_frame);
++			break;
++		case TDLS_TEARDOWN:
++			DBG_871X("recv tdls teardown, free sta_info\n");
++			ret=On_TDLS_Teardown(adapter, precv_frame);
++			break;
++		case TDLS_DISCOVERY_REQUEST:
++			DBG_871X("recv tdls discovery request frame\n");
++			ret=On_TDLS_Dis_Req(adapter, precv_frame);
++			break;
++		case TDLS_PEER_TRAFFIC_RESPONSE:
++			DBG_871X("recv tdls peer traffic response frame\n");
++			ret=On_TDLS_Peer_Traffic_Rsp(adapter, precv_frame);
++			break;
++		case TDLS_CHANNEL_SWITCH_REQUEST:
++			DBG_871X("recv tdls channel switch request frame\n");
++			ret=On_TDLS_Ch_Switch_Req(adapter, precv_frame);
++			break;
++		case TDLS_CHANNEL_SWITCH_RESPONSE:
++			DBG_871X("recv tdls channel switch response frame\n");
++			ret=On_TDLS_Ch_Switch_Rsp(adapter, precv_frame);
++			break;
++#ifdef CONFIG_WFD			
++		case 0x50:	//First byte of WFA OUI
++			if( _rtw_memcmp(WFA_OUI, (paction), 3) )
++			{
++				if( *(paction + 3) == 0x04)	//Probe request frame
++				{
++					//WFDTDLS: for sigma test, do not setup direct link automatically
++					ptdlsinfo->dev_discovered = 1;
++					DBG_871X("recv tunneled probe request frame\n");
++					issue_tunneled_probe_rsp(adapter, precv_frame);
++				}
++				if( *(paction + 3) == 0x05)	//Probe response frame
++				{
++					//WFDTDLS: for sigma test, do not setup direct link automatically
++					ptdlsinfo->dev_discovered = 1;
++					DBG_871X("recv tunneled probe response frame\n");
++				}
++			}
++			break;
++#endif //CONFIG_WFD
++		default:
++			DBG_871X("receive TDLS frame but not supported\n");
++			ret=_FAIL;
++			break;
++	}
++
++exit:
++	return ret;
++	
++}
++#endif //CONFIG_TDLS
++
++void count_rx_stats(_adapter *padapter, union recv_frame *prframe, struct sta_info*sta);
++void count_rx_stats(_adapter *padapter, union recv_frame *prframe, struct sta_info*sta)
++{
++	int	sz;
++	struct sta_info		*psta = NULL;
++	struct stainfo_stats	*pstats = NULL;
++	struct rx_pkt_attrib	*pattrib = & prframe->u.hdr.attrib;
++	struct recv_priv		*precvpriv = &padapter->recvpriv;
++
++	sz = get_recvframe_len(prframe);
++	precvpriv->rx_bytes += sz;
++
++	padapter->mlmepriv.LinkDetectInfo.NumRxOkInPeriod++;
++
++	if( (!MacAddr_isBcst(pattrib->dst)) && (!IS_MCAST(pattrib->dst))){
++		padapter->mlmepriv.LinkDetectInfo.NumRxUnicastOkInPeriod++;
++	}
++
++	if(sta)
++		psta = sta;
++	else
++		psta = prframe->u.hdr.psta;
++
++	if(psta)
++	{
++		pstats = &psta->sta_stats;
++
++		pstats->rx_data_pkts++;
++		pstats->rx_bytes += sz;
++	}
++
++}
++
++sint sta2sta_data_frame(
++	_adapter *adapter,
++	union recv_frame *precv_frame,
++	struct sta_info**psta
++);
++sint sta2sta_data_frame(
++	_adapter *adapter,
++	union recv_frame *precv_frame,
++	struct sta_info**psta
++)
++{
++	u8 *ptr = precv_frame->u.hdr.rx_data;
++	sint ret = _SUCCESS;
++	struct rx_pkt_attrib *pattrib = & precv_frame->u.hdr.attrib;
++	struct	sta_priv 		*pstapriv = &adapter->stapriv;
++	struct	mlme_priv	*pmlmepriv = &adapter->mlmepriv;
++	u8 *mybssid  = get_bssid(pmlmepriv);
++	u8 *myhwaddr = myid(&adapter->eeprompriv);
++	u8 * sta_addr = NULL;
++	sint bmcast = IS_MCAST(pattrib->dst);
++
++#ifdef CONFIG_TDLS	
++	struct tdls_info *ptdlsinfo = &adapter->tdlsinfo;
++	struct sta_info *ptdls_sta=NULL;
++	u8 *psnap_type=ptr+pattrib->hdrlen + pattrib->iv_len+SNAP_SIZE;
++	u8 *pframe_body = psnap_type + ETH_TYPE_LEN + PAYLOAD_TYPE_LEN;
++#endif //CONFIG_TDLS
++
++_func_enter_;
++
++	if ((check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == _TRUE) ||
++		(check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE))
++	{
++
++		// filter packets that SA is myself or multicast or broadcast
++		if (_rtw_memcmp(myhwaddr, pattrib->src, ETH_ALEN)){
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,(" SA==myself \n"));
++			ret= _FAIL;
++			goto exit;
++		}
++
++		if( (!_rtw_memcmp(myhwaddr, pattrib->dst, ETH_ALEN))	&& (!bmcast) ){
++			ret= _FAIL;
++			goto exit;
++		}
++
++		if( _rtw_memcmp(pattrib->bssid, "\x0\x0\x0\x0\x0\x0", ETH_ALEN) ||
++		   _rtw_memcmp(mybssid, "\x0\x0\x0\x0\x0\x0", ETH_ALEN) ||
++		   (!_rtw_memcmp(pattrib->bssid, mybssid, ETH_ALEN)) ) {
++			ret= _FAIL;
++			goto exit;
++		}
++
++		sta_addr = pattrib->src;
++
++	}
++	else if(check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _TRUE)
++	{
++#ifdef CONFIG_TDLS
++		//direct link data transfer
++		if(ptdlsinfo->setup_state == TDLS_LINKED_STATE){
++			ptdls_sta = rtw_get_stainfo(pstapriv, pattrib->src);
++			if(ptdls_sta==NULL)
++			{
++				ret=_FAIL;
++				goto exit;
++			}
++			else if(ptdls_sta->tdls_sta_state&TDLS_LINKED_STATE)
++			{
++				//drop QoS-SubType Data, including QoS NULL, excluding QoS-Data
++				if( (GetFrameSubType(ptr) & WIFI_QOS_DATA_TYPE )== WIFI_QOS_DATA_TYPE)
++				{
++					if(GetFrameSubType(ptr)&(BIT(4)|BIT(5)|BIT(6)))
++					{
++						DBG_871X("drop QoS-Sybtype Data\n");
++						ret= _FAIL;
++						goto exit;
++					}
++				}
++				// filter packets that SA is myself or multicast or broadcast
++				if (_rtw_memcmp(myhwaddr, pattrib->src, ETH_ALEN)){
++					ret= _FAIL;
++					goto exit;
++				}
++				// da should be for me
++				if((!_rtw_memcmp(myhwaddr, pattrib->dst, ETH_ALEN))&& (!bmcast))
++				{
++					ret= _FAIL;
++					goto exit;
++				}
++				// check BSSID
++				if( _rtw_memcmp(pattrib->bssid, "\x0\x0\x0\x0\x0\x0", ETH_ALEN) ||
++				     _rtw_memcmp(mybssid, "\x0\x0\x0\x0\x0\x0", ETH_ALEN) ||
++				     (!_rtw_memcmp(pattrib->bssid, mybssid, ETH_ALEN)) )
++				{
++					ret= _FAIL;
++					goto exit;
++				}
++
++				//process UAPSD tdls sta
++				process_pwrbit_data(adapter, precv_frame);
++
++				// if NULL-frame, check pwrbit
++				if ((GetFrameSubType(ptr)) == WIFI_DATA_NULL)
++				{
++					//NULL-frame with pwrbit=1, buffer_STA should buffer frames for sleep_STA
++					if(GetPwrMgt(ptr))
++					{
++						DBG_871X("TDLS: recv peer null frame with pwr bit 1\n");
++						ptdls_sta->tdls_sta_state|=TDLS_PEER_SLEEP_STATE;
++					}
++					// it would be triggered when we are off channel and receiving NULL DATA
++					// we can confirm that peer STA is at off channel
++					else if(ptdls_sta->tdls_sta_state&TDLS_CH_SWITCH_ON_STATE)
++					{
++						if((ptdls_sta->tdls_sta_state & TDLS_PEER_AT_OFF_STATE) != TDLS_PEER_AT_OFF_STATE)
++						{
++							issue_nulldata_to_TDLS_peer_STA(adapter, ptdls_sta, 0);
++							ptdls_sta->tdls_sta_state |= TDLS_PEER_AT_OFF_STATE;
++							On_TDLS_Peer_Traffic_Rsp(adapter, precv_frame);
++						}
++					}
++
++					ret= _FAIL;
++					goto exit;
++				}
++				//receive some of all TDLS management frames, process it at ON_TDLS
++				if((_rtw_memcmp(psnap_type, SNAP_ETH_TYPE_TDLS, 2))){
++					ret= OnTDLS(adapter, precv_frame);
++					goto exit;
++				}
++				
++			}
++
++			sta_addr = pattrib->src;
++			
++		}		
++		else
++#endif //CONFIG_TDLS
++		{
++			// For Station mode, sa and bssid should always be BSSID, and DA is my mac-address
++			if(!_rtw_memcmp(pattrib->bssid, pattrib->src, ETH_ALEN) )
++			{
++				RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("bssid != TA under STATION_MODE; drop pkt\n"));
++				ret= _FAIL;
++				goto exit;
++			}
++
++			sta_addr = pattrib->bssid;
++		}
++	}
++	else if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE)
++	{
++		if (bmcast)
++		{
++			// For AP mode, if DA == MCAST, then BSSID should be also MCAST
++			if (!IS_MCAST(pattrib->bssid)){
++					ret= _FAIL;
++					goto exit;
++			}
++		}
++		else // not mc-frame
++		{
++			// For AP mode, if DA is non-MCAST, then it must be BSSID, and bssid == BSSID
++			if(!_rtw_memcmp(pattrib->bssid, pattrib->dst, ETH_ALEN)) {
++				ret= _FAIL;
++				goto exit;
++			}
++
++			sta_addr = pattrib->src;
++		}
++
++	}
++	else if(check_fwstate(pmlmepriv, WIFI_MP_STATE) == _TRUE)
++	{
++		_rtw_memcpy(pattrib->dst, GetAddr1Ptr(ptr), ETH_ALEN);
++		_rtw_memcpy(pattrib->src, GetAddr2Ptr(ptr), ETH_ALEN);
++		_rtw_memcpy(pattrib->bssid, GetAddr3Ptr(ptr), ETH_ALEN);
++		_rtw_memcpy(pattrib->ra, pattrib->dst, ETH_ALEN);
++		_rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN);
++
++		sta_addr = mybssid;
++	}
++	else
++	{
++		ret  = _FAIL;
++	}
++
++
++
++	if(bmcast)
++		*psta = rtw_get_bcmc_stainfo(adapter);
++	else
++		*psta = rtw_get_stainfo(pstapriv, sta_addr); // get ap_info
++
++#ifdef CONFIG_TDLS
++	if(ptdls_sta != NULL)
++		*psta = ptdls_sta;
++#endif //CONFIG_TDLS
++
++
++	if (*psta == NULL) {
++		RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("can't get psta under sta2sta_data_frame ; drop pkt\n"));
++#ifdef CONFIG_MP_INCLUDED
++		if(check_fwstate(pmlmepriv, WIFI_MP_STATE) == _TRUE)
++		adapter->mppriv.rx_pktloss++;
++#endif
++		ret= _FAIL;
++		goto exit;
++	}
++
++exit:
++_func_exit_;
++	return ret;
++
++}
++
++sint ap2sta_data_frame(
++	_adapter *adapter,
++	union recv_frame *precv_frame,
++	struct sta_info**psta );
++sint ap2sta_data_frame(
++	_adapter *adapter,
++	union recv_frame *precv_frame,
++	struct sta_info**psta )
++{
++	u8 *ptr = precv_frame->u.hdr.rx_data;
++	struct rx_pkt_attrib *pattrib = & precv_frame->u.hdr.attrib;
++	sint ret = _SUCCESS;
++	struct	sta_priv 		*pstapriv = &adapter->stapriv;
++	struct	mlme_priv	*pmlmepriv = &adapter->mlmepriv;
++	u8 *mybssid  = get_bssid(pmlmepriv);
++	u8 *myhwaddr = myid(&adapter->eeprompriv);
++	sint bmcast = IS_MCAST(pattrib->dst);
++
++_func_enter_;
++
++	if ((check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _TRUE)
++		&& (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE 
++			|| check_fwstate(pmlmepriv, _FW_UNDER_LINKING) == _TRUE	)
++		)
++	{
++
++		// filter packets that SA is myself or multicast or broadcast
++		if (_rtw_memcmp(myhwaddr, pattrib->src, ETH_ALEN)){
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,(" SA==myself \n"));
++			#ifdef DBG_RX_DROP_FRAME
++			DBG_871X("DBG_RX_DROP_FRAME %s SA=%x:%x:%x:%x:%x:%x, myhwaddr= %x:%x:%x:%x:%x:%x\n", __FUNCTION__,
++				pattrib->src[0], pattrib->src[1], pattrib->src[2],
++				pattrib->src[3], pattrib->src[4], pattrib->src[5],
++				*(myhwaddr), *(myhwaddr+1), *(myhwaddr+2),
++				*(myhwaddr+3), *(myhwaddr+4), *(myhwaddr+5));
++			#endif			
++			ret= _FAIL;
++			goto exit;
++		}
++
++		// da should be for me
++		if((!_rtw_memcmp(myhwaddr, pattrib->dst, ETH_ALEN))&& (!bmcast))
++		{
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,
++				(" ap2sta_data_frame:  compare DA fail; DA="MAC_FMT"\n", MAC_ARG(pattrib->dst)));
++			#ifdef DBG_RX_DROP_FRAME
++			DBG_871X("DBG_RX_DROP_FRAME %s DA="MAC_FMT"\n", __func__, MAC_ARG(pattrib->dst));
++			#endif
++			ret= _FAIL;
++			goto exit;
++		}
++
++
++		// check BSSID
++		if( _rtw_memcmp(pattrib->bssid, "\x0\x0\x0\x0\x0\x0", ETH_ALEN) ||
++		     _rtw_memcmp(mybssid, "\x0\x0\x0\x0\x0\x0", ETH_ALEN) ||
++		     (!_rtw_memcmp(pattrib->bssid, mybssid, ETH_ALEN)) )
++		{
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,
++				(" ap2sta_data_frame:  compare BSSID fail ; BSSID="MAC_FMT"\n", MAC_ARG(pattrib->bssid)));
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("mybssid="MAC_FMT"\n", MAC_ARG(mybssid)));
++			#ifdef DBG_RX_DROP_FRAME
++			DBG_871X("DBG_RX_DROP_FRAME %s BSSID="MAC_FMT", mybssid="MAC_FMT"\n",
++				__FUNCTION__, MAC_ARG(pattrib->bssid), MAC_ARG(mybssid));
++			DBG_871X( "this adapter = %d, buddy adapter = %d\n", adapter->adapter_type, adapter->pbuddy_adapter->adapter_type );
++			#endif
++
++			if(!bmcast)
++			{
++				DBG_871X("issue_deauth to the nonassociated ap=" MAC_FMT " for the reason(7)\n", MAC_ARG(pattrib->bssid));
++				issue_deauth(adapter, pattrib->bssid, WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA);
++			}
++
++			ret= _FAIL;
++			goto exit;
++		}
++
++		if(bmcast)
++			*psta = rtw_get_bcmc_stainfo(adapter);
++		else
++			*psta = rtw_get_stainfo(pstapriv, pattrib->bssid); // get ap_info
++
++		if (*psta == NULL) {
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("ap2sta: can't get psta under STATION_MODE ; drop pkt\n"));
++			#ifdef DBG_RX_DROP_FRAME
++			DBG_871X("DBG_RX_DROP_FRAME %s can't get psta under STATION_MODE ; drop pkt\n", __FUNCTION__);
++			#endif
++			ret= _FAIL;
++			goto exit;
++		}
++
++		if ((GetFrameSubType(ptr) & WIFI_QOS_DATA_TYPE) == WIFI_QOS_DATA_TYPE) {
++		}
++
++		if (GetFrameSubType(ptr) & BIT(6)) {
++			/* No data, will not indicate to upper layer, temporily count it here */
++			count_rx_stats(adapter, precv_frame, *psta);
++			ret = RTW_RX_HANDLED;
++			goto exit;
++		}
++
++	}
++	else if ((check_fwstate(pmlmepriv, WIFI_MP_STATE) == _TRUE) &&
++		     (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) )
++	{
++		_rtw_memcpy(pattrib->dst, GetAddr1Ptr(ptr), ETH_ALEN);
++		_rtw_memcpy(pattrib->src, GetAddr2Ptr(ptr), ETH_ALEN);
++		_rtw_memcpy(pattrib->bssid, GetAddr3Ptr(ptr), ETH_ALEN);
++		_rtw_memcpy(pattrib->ra, pattrib->dst, ETH_ALEN);
++		_rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN);
++
++		//
++		_rtw_memcpy(pattrib->bssid,  mybssid, ETH_ALEN);
++
++
++		*psta = rtw_get_stainfo(pstapriv, pattrib->bssid); // get sta_info
++		if (*psta == NULL) {
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("can't get psta under MP_MODE ; drop pkt\n"));
++			#ifdef DBG_RX_DROP_FRAME
++			DBG_871X("DBG_RX_DROP_FRAME %s can't get psta under WIFI_MP_STATE ; drop pkt\n", __FUNCTION__);
++			#endif
++			ret= _FAIL;
++			goto exit;
++		}
++
++
++	}
++	else if (check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE)
++	{
++		/* Special case */
++		ret = RTW_RX_HANDLED;
++		goto exit;
++	}
++	else
++	{
++		if(_rtw_memcmp(myhwaddr, pattrib->dst, ETH_ALEN)&& (!bmcast))
++		{
++			*psta = rtw_get_stainfo(pstapriv, pattrib->bssid); // get sta_info
++			if (*psta == NULL)
++			{
++				DBG_871X("issue_deauth to the ap=" MAC_FMT " for the reason(7)\n", MAC_ARG(pattrib->bssid));
++		
++				issue_deauth(adapter, pattrib->bssid, WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA);
++			}
++		}	
++	
++		ret = _FAIL;
++		#ifdef DBG_RX_DROP_FRAME
++		DBG_871X("DBG_RX_DROP_FRAME %s fw_state:0x%x\n", __FUNCTION__, get_fwstate(pmlmepriv));
++		#endif
++	}
++
++exit:
++
++_func_exit_;
++
++	return ret;
++
++}
++
++sint sta2ap_data_frame(
++	_adapter *adapter,
++	union recv_frame *precv_frame,
++	struct sta_info**psta );
++sint sta2ap_data_frame(
++	_adapter *adapter,
++	union recv_frame *precv_frame,
++	struct sta_info**psta )
++{
++	u8 *ptr = precv_frame->u.hdr.rx_data;
++	struct rx_pkt_attrib *pattrib = & precv_frame->u.hdr.attrib;
++	struct	sta_priv 		*pstapriv = &adapter->stapriv;
++	struct	mlme_priv	*pmlmepriv = &adapter->mlmepriv;
++	unsigned char *mybssid  = get_bssid(pmlmepriv);	
++	sint ret=_SUCCESS;
++
++_func_enter_;
++
++	if (check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE)
++	{
++		//For AP mode, RA=BSSID, TX=STA(SRC_ADDR), A3=DST_ADDR
++		if(!_rtw_memcmp(pattrib->bssid, mybssid, ETH_ALEN))
++		{
++			ret= _FAIL;
++			goto exit;
++		}
++
++		*psta = rtw_get_stainfo(pstapriv, pattrib->src);
++		if (*psta == NULL)
++		{
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("can't get psta under AP_MODE; drop pkt\n"));
++			DBG_871X("issue_deauth to sta=" MAC_FMT " for the reason(7)\n", MAC_ARG(pattrib->src));
++
++			issue_deauth(adapter, pattrib->src, WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA);
++
++			ret = RTW_RX_HANDLED;
++			goto exit;
++		}
++
++		process_pwrbit_data(adapter, precv_frame);
++
++		if ((GetFrameSubType(ptr) & WIFI_QOS_DATA_TYPE) == WIFI_QOS_DATA_TYPE) {
++			process_wmmps_data(adapter, precv_frame);
++		}
++
++		if (GetFrameSubType(ptr) & BIT(6)) {
++			/* No data, will not indicate to upper layer, temporily count it here */
++			count_rx_stats(adapter, precv_frame, *psta);
++			ret = RTW_RX_HANDLED;
++			goto exit;
++		}
++	}
++	else {
++		u8 *myhwaddr = myid(&adapter->eeprompriv);
++		if (!_rtw_memcmp(pattrib->ra, myhwaddr, ETH_ALEN)) {
++			ret = RTW_RX_HANDLED;
++			goto exit;
++		}
++		DBG_871X("issue_deauth to sta=" MAC_FMT " for the reason(7)\n", MAC_ARG(pattrib->src));
++		issue_deauth(adapter, pattrib->src, WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA);
++		ret = RTW_RX_HANDLED;
++		goto exit;
++	}
++
++exit:
++
++_func_exit_;
++
++	return ret;
++
++}
++
++sint validate_recv_ctrl_frame(_adapter *padapter, union recv_frame *precv_frame);
++sint validate_recv_ctrl_frame(_adapter *padapter, union recv_frame *precv_frame)
++{
++#ifdef CONFIG_AP_MODE
++	struct rx_pkt_attrib *pattrib = &precv_frame->u.hdr.attrib;
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	u8 *pframe = precv_frame->u.hdr.rx_data;
++	//uint len = precv_frame->u.hdr.len;
++		
++	//DBG_871X("+validate_recv_ctrl_frame\n");
++
++	if (GetFrameType(pframe) != WIFI_CTRL_TYPE)
++	{		
++		return _FAIL;
++	}
++
++	//receive the frames that ra(a1) is my address
++	if (!_rtw_memcmp(GetAddr1Ptr(pframe), myid(&padapter->eeprompriv), ETH_ALEN))
++	{
++		return _FAIL;
++	}
++
++	//only handle ps-poll
++	if(GetFrameSubType(pframe) == WIFI_PSPOLL)
++	{
++		u16 aid;
++		u8 wmmps_ac=0;	
++		struct sta_info *psta=NULL;
++	
++		aid = GetAid(pframe);
++		psta = rtw_get_stainfo(pstapriv, GetAddr2Ptr(pframe));
++		
++		if((psta==NULL) || (psta->aid!=aid))
++		{
++			return _FAIL;
++		}
++
++		//for rx pkt statistics
++		psta->sta_stats.rx_ctrl_pkts++;
++
++		switch(pattrib->priority)
++		{
++			case 1:
++			case 2:
++				wmmps_ac = psta->uapsd_bk&BIT(0);
++				break;
++			case 4:
++			case 5:
++				wmmps_ac = psta->uapsd_vi&BIT(0);
++				break;
++			case 6:
++			case 7:
++				wmmps_ac = psta->uapsd_vo&BIT(0);
++				break;
++			case 0:
++			case 3:
++			default:
++				wmmps_ac = psta->uapsd_be&BIT(0);
++				break;	
++		}
++
++		if(wmmps_ac)
++			return _FAIL;
++
++		if(psta->state & WIFI_STA_ALIVE_CHK_STATE)
++		{					
++			DBG_871X("%s alive check-rx ps-poll\n", __func__);
++			psta->expire_to = pstapriv->expire_to;
++			psta->state ^= WIFI_STA_ALIVE_CHK_STATE;
++		}	
++
++		if((psta->state&WIFI_SLEEP_STATE) && (pstapriv->sta_dz_bitmap&BIT(psta->aid)))
++		{
++			_irqL irqL;	 
++			_list	*xmitframe_plist, *xmitframe_phead;
++			struct xmit_frame *pxmitframe=NULL;
++			struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
++		
++			//_enter_critical_bh(&psta->sleep_q.lock, &irqL);
++			_enter_critical_bh(&pxmitpriv->lock, &irqL);
++
++			xmitframe_phead = get_list_head(&psta->sleep_q);
++			xmitframe_plist = get_next(xmitframe_phead);
++
++			if ((rtw_end_of_queue_search(xmitframe_phead, xmitframe_plist)) == _FALSE)
++			{			
++				pxmitframe = LIST_CONTAINOR(xmitframe_plist, struct xmit_frame, list);
++
++				xmitframe_plist = get_next(xmitframe_plist);
++
++				rtw_list_delete(&pxmitframe->list);
++
++				psta->sleepq_len--;
++
++				if(psta->sleepq_len>0)
++					pxmitframe->attrib.mdata = 1;
++                                else
++					pxmitframe->attrib.mdata = 0;
++
++				pxmitframe->attrib.triggered = 1;
++
++	                        //DBG_871X("handling ps-poll, q_len=%d, tim=%x\n", psta->sleepq_len, pstapriv->tim_bitmap);
++
++#if 0
++				_exit_critical_bh(&psta->sleep_q.lock, &irqL);		
++				if(rtw_hal_xmit(padapter, pxmitframe) == _TRUE)
++				{		
++					rtw_os_xmit_complete(padapter, pxmitframe);
++				}
++				_enter_critical_bh(&psta->sleep_q.lock, &irqL);	
++#endif
++				rtw_hal_xmitframe_enqueue(padapter, pxmitframe);
++
++				if(psta->sleepq_len==0)
++				{
++					pstapriv->tim_bitmap &= ~BIT(psta->aid);
++
++					//DBG_871X("after handling ps-poll, tim=%x\n", pstapriv->tim_bitmap);
++
++					//upate BCN for TIM IE
++					//update_BCNTIM(padapter);		
++					update_beacon(padapter, _TIM_IE_, NULL, _FALSE);
++				}
++				
++				//_exit_critical_bh(&psta->sleep_q.lock, &irqL);
++				_exit_critical_bh(&pxmitpriv->lock, &irqL);
++				
++			}
++			else
++			{
++				//_exit_critical_bh(&psta->sleep_q.lock, &irqL);
++				_exit_critical_bh(&pxmitpriv->lock, &irqL);
++			
++				//DBG_871X("no buffered packets to xmit\n");
++				if(pstapriv->tim_bitmap&BIT(psta->aid))
++				{
++					if(psta->sleepq_len==0)
++					{
++						DBG_871X("no buffered packets to xmit\n");
++
++						//issue nulldata with More data bit = 0 to indicate we have no buffered packets
++						issue_nulldata(padapter, psta->hwaddr, 0, 0, 0);
++					}
++					else
++					{
++						DBG_871X("error!psta->sleepq_len=%d\n", psta->sleepq_len);
++						psta->sleepq_len=0;						
++					}
++				
++					pstapriv->tim_bitmap &= ~BIT(psta->aid);					
++
++					//upate BCN for TIM IE
++					//update_BCNTIM(padapter);
++					update_beacon(padapter, _TIM_IE_, NULL, _FALSE);
++				}
++				
++			}				
++			
++		}
++		
++	}
++	
++#endif
++
++	return _FAIL;
++
++}
++
++union recv_frame* recvframe_chk_defrag(PADAPTER padapter, union recv_frame *precv_frame);
++sint validate_recv_mgnt_frame(PADAPTER padapter, union recv_frame *precv_frame);
++sint validate_recv_mgnt_frame(PADAPTER padapter, union recv_frame *precv_frame)
++{
++	//struct mlme_priv *pmlmepriv = &adapter->mlmepriv;
++
++	RT_TRACE(_module_rtl871x_recv_c_, _drv_info_, ("+validate_recv_mgnt_frame\n"));
++
++#if 0
++	if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE)
++	{
++#ifdef CONFIG_NATIVEAP_MLME
++		mgt_dispatcher(padapter, precv_frame);
++#else
++		rtw_hostapd_mlme_rx(padapter, precv_frame);
++#endif
++	}
++	else
++	{
++		mgt_dispatcher(padapter, precv_frame);
++	}
++#endif
++
++	precv_frame = recvframe_chk_defrag(padapter, precv_frame);
++	if (precv_frame == NULL) {
++		RT_TRACE(_module_rtl871x_recv_c_, _drv_notice_,("%s: fragment packet\n",__FUNCTION__));
++		return _SUCCESS;
++	}
++
++	{
++		//for rx pkt statistics
++		struct sta_info *psta = rtw_get_stainfo(&padapter->stapriv, GetAddr2Ptr(precv_frame->u.hdr.rx_data));
++		if (psta) {
++			psta->sta_stats.rx_mgnt_pkts++;
++			if (GetFrameSubType(precv_frame->u.hdr.rx_data) == WIFI_BEACON)
++				psta->sta_stats.rx_beacon_pkts++;
++			else if (GetFrameSubType(precv_frame->u.hdr.rx_data) == WIFI_PROBEREQ)
++				psta->sta_stats.rx_probereq_pkts++;
++			else if (GetFrameSubType(precv_frame->u.hdr.rx_data) == WIFI_PROBERSP) {
++				if (_rtw_memcmp(padapter->eeprompriv.mac_addr, GetAddr1Ptr(precv_frame->u.hdr.rx_data), ETH_ALEN) == _TRUE)
++					psta->sta_stats.rx_probersp_pkts++;
++				else if (is_broadcast_mac_addr(GetAddr1Ptr(precv_frame->u.hdr.rx_data))
++					|| is_multicast_mac_addr(GetAddr1Ptr(precv_frame->u.hdr.rx_data)))
++					psta->sta_stats.rx_probersp_bm_pkts++;
++				else 
++					psta->sta_stats.rx_probersp_uo_pkts++;
++			}
++		}
++	}
++
++#ifdef CONFIG_INTEL_PROXIM
++	if(padapter->proximity.proxim_on==_TRUE)
++	{
++		struct rx_pkt_attrib * pattrib=&precv_frame->u.hdr.attrib;
++		 struct recv_stat* prxstat=( struct recv_stat * )  precv_frame->u.hdr.rx_head ;
++		 u8 * pda,*psa,*pbssid,*ptr;
++		 ptr=precv_frame->u.hdr.rx_data; 
++		pda = get_da(ptr);
++		psa = get_sa(ptr);
++		pbssid = get_hdr_bssid(ptr);
++
++
++		_rtw_memcpy(pattrib->dst, pda, ETH_ALEN);
++		_rtw_memcpy(pattrib->src, psa, ETH_ALEN);
++
++		_rtw_memcpy(pattrib->bssid, pbssid, ETH_ALEN);
++
++	switch(pattrib->to_fr_ds)
++	{
++		case 0:
++			_rtw_memcpy(pattrib->ra, pda, ETH_ALEN);
++			_rtw_memcpy(pattrib->ta, psa, ETH_ALEN);
++			break;
++
++		case 1:
++			_rtw_memcpy(pattrib->ra, pda, ETH_ALEN);
++			_rtw_memcpy(pattrib->ta, pbssid, ETH_ALEN);
++			break;
++
++		case 2:
++			_rtw_memcpy(pattrib->ra, pbssid, ETH_ALEN);
++			_rtw_memcpy(pattrib->ta, psa, ETH_ALEN);
++			break;
++
++		case 3:
++			_rtw_memcpy(pattrib->ra, GetAddr1Ptr(ptr), ETH_ALEN);
++			_rtw_memcpy(pattrib->ta, GetAddr2Ptr(ptr), ETH_ALEN);
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,(" case 3\n"));
++			break;
++
++		default:
++			break;
++
++		}	
++			pattrib->priority=0;
++			pattrib->hdrlen = pattrib->to_fr_ds==3 ? 30 : 24;
++
++		 padapter->proximity.proxim_rx(padapter,precv_frame);
++	}
++#endif
++	mgt_dispatcher(padapter, precv_frame);
++
++	return _SUCCESS;
++
++}
++
++sint validate_recv_data_frame(_adapter *adapter, union recv_frame *precv_frame);
++sint validate_recv_data_frame(_adapter *adapter, union recv_frame *precv_frame)
++{
++	u8 bretry;
++	u8 *psa, *pda, *pbssid;
++	struct sta_info *psta = NULL;
++	u8 *ptr = precv_frame->u.hdr.rx_data;
++	struct rx_pkt_attrib	*pattrib = & precv_frame->u.hdr.attrib;
++	struct security_priv	*psecuritypriv = &adapter->securitypriv;	
++	sint ret = _SUCCESS;
++#ifdef CONFIG_TDLS
++	struct tdls_info *ptdlsinfo = &adapter->tdlsinfo;
++#endif //CONFIG_TDLS
++
++_func_enter_;
++
++	bretry = GetRetry(ptr);
++	pda = get_da(ptr);
++	psa = get_sa(ptr);
++	pbssid = get_hdr_bssid(ptr);
++
++	if(pbssid == NULL){
++		ret= _FAIL;
++		goto exit;
++	}
++
++	_rtw_memcpy(pattrib->dst, pda, ETH_ALEN);
++	_rtw_memcpy(pattrib->src, psa, ETH_ALEN);
++
++	_rtw_memcpy(pattrib->bssid, pbssid, ETH_ALEN);
++
++	switch(pattrib->to_fr_ds)
++	{
++		case 0:
++			_rtw_memcpy(pattrib->ra, pda, ETH_ALEN);
++			_rtw_memcpy(pattrib->ta, psa, ETH_ALEN);
++			ret = sta2sta_data_frame(adapter, precv_frame, &psta);
++			break;
++
++		case 1:
++			_rtw_memcpy(pattrib->ra, pda, ETH_ALEN);
++			_rtw_memcpy(pattrib->ta, pbssid, ETH_ALEN);
++			ret = ap2sta_data_frame(adapter, precv_frame, &psta);
++			break;
++
++		case 2:
++			_rtw_memcpy(pattrib->ra, pbssid, ETH_ALEN);
++			_rtw_memcpy(pattrib->ta, psa, ETH_ALEN);
++			ret = sta2ap_data_frame(adapter, precv_frame, &psta);
++			break;
++
++		case 3:
++			_rtw_memcpy(pattrib->ra, GetAddr1Ptr(ptr), ETH_ALEN);
++			_rtw_memcpy(pattrib->ta, GetAddr2Ptr(ptr), ETH_ALEN);
++			ret =_FAIL;
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,(" case 3\n"));
++			break;
++
++		default:
++			ret =_FAIL;
++			break;
++
++	}
++
++	if(ret ==_FAIL){
++		#ifdef DBG_RX_DROP_FRAME
++		DBG_871X("DBG_RX_DROP_FRAME %s case:%d, res:%d\n", __FUNCTION__, pattrib->to_fr_ds, ret);
++		#endif
++		goto exit;
++	} else if (ret == RTW_RX_HANDLED) {
++		goto exit;
++	}
++
++
++	if(psta==NULL){
++		RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,(" after to_fr_ds_chk; psta==NULL \n"));
++		ret= _FAIL;
++		goto exit;
++	}
++	
++	//psta->rssi = prxcmd->rssi;
++	//psta->signal_quality= prxcmd->sq;
++	precv_frame->u.hdr.psta = psta;
++		
++
++	pattrib->amsdu=0;
++	pattrib->ack_policy = 0;
++	//parsing QC field
++	if(pattrib->qos == 1)
++	{
++		pattrib->priority = GetPriority((ptr + 24));
++		pattrib->ack_policy = GetAckpolicy((ptr + 24));
++		pattrib->amsdu = GetAMsdu((ptr + 24));
++		pattrib->hdrlen = pattrib->to_fr_ds==3 ? 32 : 26;
++
++		if(pattrib->priority!=0 && pattrib->priority!=3)
++		{
++			adapter->recvpriv.bIsAnyNonBEPkts = _TRUE;
++		}
++	}
++	else
++	{
++		pattrib->priority=0;
++		pattrib->hdrlen = pattrib->to_fr_ds==3 ? 30 : 24;
++	}
++
++
++	if(pattrib->order)//HT-CTRL 11n
++	{
++		pattrib->hdrlen += 4;
++	}
++
++	precv_frame->u.hdr.preorder_ctrl = &psta->recvreorder_ctrl[pattrib->priority];
++
++	// decache, drop duplicate recv packets
++	if(recv_decache(precv_frame, bretry, &psta->sta_recvpriv.rxcache) == _FAIL)
++	{
++		RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("decache : drop pkt\n"));
++		ret= _FAIL;
++		goto exit;
++	}
++
++#if 0
++	if(psta->tdls_sta_state & TDLS_LINKED_STATE )
++	{
++		if(psta->dot118021XPrivacy==_AES_)
++			pattrib->encrypt=psta->dot118021XPrivacy;
++	}
++#endif //CONFIG_TDLS
++
++	if(pattrib->privacy){
++
++		RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("validate_recv_data_frame:pattrib->privacy=%x\n", pattrib->privacy));
++		RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("\n ^^^^^^^^^^^IS_MCAST(pattrib->ra(0x%02x))=%d^^^^^^^^^^^^^^^6\n", pattrib->ra[0],IS_MCAST(pattrib->ra)));
++
++#ifdef CONFIG_TDLS
++		if((psta->tdls_sta_state & TDLS_LINKED_STATE) && (psta->dot118021XPrivacy==_AES_))
++		{
++				pattrib->encrypt=psta->dot118021XPrivacy;
++		}
++		else
++#endif //CONFIG_TDLS
++		GET_ENCRY_ALGO(psecuritypriv, psta, pattrib->encrypt, IS_MCAST(pattrib->ra));
++
++		RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("\n pattrib->encrypt=%d\n",pattrib->encrypt));
++
++		SET_ICE_IV_LEN(pattrib->iv_len, pattrib->icv_len, pattrib->encrypt);
++	}
++	else
++	{
++		pattrib->encrypt = 0;
++		pattrib->iv_len = pattrib->icv_len = 0;
++	}
++
++exit:
++
++_func_exit_;
++
++	return ret;
++}
++
++#ifdef CONFIG_IEEE80211W
++static sint validate_80211w_mgmt(_adapter *adapter, union recv_frame *precv_frame)
++{
++	struct mlme_priv *pmlmepriv = &adapter->mlmepriv;
++	struct rx_pkt_attrib *pattrib = & precv_frame->u.hdr.attrib;
++	u8 *ptr = precv_frame->u.hdr.rx_data;
++	u8 type;
++	u8 subtype;
++			
++	type =  GetFrameType(ptr);
++	subtype = GetFrameSubType(ptr); //bit(7)~bit(2)
++			
++	//only support station mode
++	if(check_fwstate(pmlmepriv, WIFI_STATION_STATE) && check_fwstate(pmlmepriv, _FW_LINKED) 
++		&& adapter->securitypriv.binstallBIPkey == _TRUE)
++	{
++		//unicast management frame decrypt
++		if(pattrib->privacy && !(IS_MCAST(GetAddr1Ptr(ptr))) && 
++			(subtype == WIFI_DEAUTH || subtype == WIFI_DISASSOC || subtype == WIFI_ACTION))
++		{
++			u8 *ppp, *mgmt_DATA;
++			u32 data_len=0;
++			ppp = GetAddr2Ptr(ptr);
++			
++			pattrib->bdecrypted = 0;
++			pattrib->encrypt = _AES_;
++			pattrib->hdrlen = sizeof(struct rtw_ieee80211_hdr_3addr);
++			//set iv and icv length
++			SET_ICE_IV_LEN(pattrib->iv_len, pattrib->icv_len, pattrib->encrypt);
++			_rtw_memcpy(pattrib->ra, GetAddr1Ptr(ptr), ETH_ALEN);
++			_rtw_memcpy(pattrib->ta, GetAddr2Ptr(ptr), ETH_ALEN);
++			//actual management data frame body
++			data_len = pattrib->pkt_len - pattrib->hdrlen - pattrib->iv_len - pattrib->icv_len;
++			mgmt_DATA = rtw_zmalloc(data_len);
++			if(mgmt_DATA == NULL)
++			{
++				DBG_871X("%s mgmt allocate fail  !!!!!!!!!\n", __FUNCTION__);
++				goto validate_80211w_fail;
++			}
++			/*//dump the packet content before decrypt
++			{
++				int pp;
++				printk("pattrib->pktlen = %d =>", pattrib->pkt_len);
++				for(pp=0;pp< pattrib->pkt_len; pp++)
++					printk(" %02x ", ptr[pp]);
++				printk("\n");
++			}*/
++			
++			precv_frame = decryptor(adapter, precv_frame);
++			//save actual management data frame body
++			_rtw_memcpy(mgmt_DATA, ptr+pattrib->hdrlen+pattrib->iv_len, data_len);
++			//overwrite the iv field
++			_rtw_memcpy(ptr+pattrib->hdrlen, mgmt_DATA, data_len);
++			//remove the iv and icv length
++			pattrib->pkt_len = pattrib->pkt_len - pattrib->iv_len - pattrib->icv_len;
++			rtw_mfree(mgmt_DATA, data_len);
++			/*//print packet content after decryption
++			{
++				int pp;
++				printk("after decryption pattrib->pktlen = %d @@=>", pattrib->pkt_len);
++				for(pp=0;pp< pattrib->pkt_len; pp++)
++					printk(" %02x ", ptr[pp]);
++				printk("\n");
++			}*/
++			if(!precv_frame)
++			{
++				DBG_871X("%s mgmt descrypt fail  !!!!!!!!!\n", __FUNCTION__);
++				goto validate_80211w_fail;
++			}
++		}
++		else if(IS_MCAST(GetAddr1Ptr(ptr)) &&
++			(subtype == WIFI_DEAUTH || subtype == WIFI_DISASSOC))
++		{
++			sint BIP_ret = _SUCCESS;
++			//verify BIP MME IE of broadcast/multicast de-auth/disassoc packet
++			BIP_ret = rtw_BIP_verify(adapter, (u8 * )precv_frame);
++			if(BIP_ret == _FAIL)
++			{
++				//DBG_871X("802.11w BIP verify fail\n");
++				goto validate_80211w_fail;
++			}
++			else if(BIP_ret == RTW_RX_HANDLED)
++			{
++				//DBG_871X("802.11w recv none protected packet\n");
++				//issue sa query request
++				issue_action_SA_Query(adapter, NULL, 0, 0);
++				goto validate_80211w_fail;
++			}
++		}//802.11w protect
++		else
++		{
++			if(subtype == WIFI_ACTION)
++			{
++				//according 802.11-2012 standard, these five types are not robust types
++				if( ptr[WLAN_HDR_A3_LEN] != RTW_WLAN_CATEGORY_PUBLIC          &&
++					ptr[WLAN_HDR_A3_LEN] != RTW_WLAN_CATEGORY_HT              &&
++					ptr[WLAN_HDR_A3_LEN] != RTW_WLAN_CATEGORY_UNPROTECTED_WNM &&
++					ptr[WLAN_HDR_A3_LEN] != RTW_WLAN_CATEGORY_SELF_PROTECTED  &&
++					ptr[WLAN_HDR_A3_LEN] != RTW_WLAN_CATEGORY_P2P)
++				{
++					DBG_871X("action frame category=%d should robust\n", ptr[WLAN_HDR_A3_LEN]);
++					goto validate_80211w_fail;
++				}
++			}
++			else if(subtype == WIFI_DEAUTH || subtype == WIFI_DISASSOC)
++			{
++				DBG_871X("802.11w recv none protected packet\n");
++				//issue sa query request
++				issue_action_SA_Query(adapter, NULL, 0, 0);
++				goto validate_80211w_fail;
++			}
++		}
++	}
++	return _SUCCESS;
++			
++validate_80211w_fail:
++	return _FAIL;
++	
++}
++#endif //CONFIG_IEEE80211W
++
++sint validate_recv_frame(_adapter *adapter, union recv_frame *precv_frame);
++sint validate_recv_frame(_adapter *adapter, union recv_frame *precv_frame)
++{
++	//shall check frame subtype, to / from ds, da, bssid
++
++	//then call check if rx seq/frag. duplicated.
++
++	u8 type;
++	u8 subtype;
++	sint retval = _SUCCESS;
++
++	struct rx_pkt_attrib *pattrib = & precv_frame->u.hdr.attrib;
++
++	u8 *ptr = precv_frame->u.hdr.rx_data;
++	u8  ver =(unsigned char) (*ptr)&0x3 ;
++#ifdef CONFIG_FIND_BEST_CHANNEL
++	struct mlme_ext_priv *pmlmeext = &adapter->mlmeextpriv;
++#endif
++
++#ifdef CONFIG_TDLS
++	struct tdls_info *ptdlsinfo = &adapter->tdlsinfo;
++#endif //CONFIG_TDLS
++
++_func_enter_;
++
++
++#ifdef CONFIG_FIND_BEST_CHANNEL
++	if (pmlmeext->sitesurvey_res.state == SCAN_PROCESS) {
++		int ch_set_idx = rtw_ch_set_search_ch(pmlmeext->channel_set, rtw_get_oper_ch(adapter));
++		if (ch_set_idx >= 0)
++			pmlmeext->channel_set[ch_set_idx].rx_count++;
++	}
++#endif
++
++#ifdef CONFIG_TDLS
++	if(ptdlsinfo->ch_sensing==1 && ptdlsinfo->cur_channel !=0){
++		ptdlsinfo->collect_pkt_num[ptdlsinfo->cur_channel-1]++;
++	}
++#endif //CONFIG_TDLS
++
++#ifdef RTK_DMP_PLATFORM
++	if ( 0 )
++	{
++		DBG_871X("++\n");
++		{
++			int i;
++			for(i=0; i<64;i=i+8)
++				DBG_871X("%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:", *(ptr+i),
++				*(ptr+i+1), *(ptr+i+2) ,*(ptr+i+3) ,*(ptr+i+4),*(ptr+i+5), *(ptr+i+6), *(ptr+i+7));
++
++		}
++		DBG_871X("--\n");
++	}
++#endif //RTK_DMP_PLATFORM
++
++	//add version chk
++	if(ver!=0){
++		RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("validate_recv_data_frame fail! (ver!=0)\n"));
++		retval= _FAIL;
++		goto exit;
++	}
++
++	type =  GetFrameType(ptr);
++	subtype = GetFrameSubType(ptr); //bit(7)~bit(2)
++
++	pattrib->to_fr_ds = get_tofr_ds(ptr);
++
++	pattrib->frag_num = GetFragNum(ptr);
++	pattrib->seq_num = GetSequence(ptr);
++
++	pattrib->pw_save = GetPwrMgt(ptr);
++	pattrib->mfrag = GetMFrag(ptr);
++	pattrib->mdata = GetMData(ptr);
++	pattrib->privacy = GetPrivacy(ptr);
++	pattrib->order = GetOrder(ptr);
++#if 0 //for debug
++
++if(pHalData->bDumpRxPkt ==1){
++	int i;
++	DBG_871X("############################# \n");
++	
++	for(i=0; i<64;i=i+8)
++		DBG_871X("%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:\n", *(ptr+i),
++		*(ptr+i+1), *(ptr+i+2) ,*(ptr+i+3) ,*(ptr+i+4),*(ptr+i+5), *(ptr+i+6), *(ptr+i+7));
++	DBG_871X("############################# \n");
++}
++else if(pHalData->bDumpRxPkt ==2){
++	if(type== WIFI_MGT_TYPE){
++		int i;
++		DBG_871X("############################# \n");
++
++		for(i=0; i<64;i=i+8)
++			DBG_871X("%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:\n", *(ptr+i),
++			*(ptr+i+1), *(ptr+i+2) ,*(ptr+i+3) ,*(ptr+i+4),*(ptr+i+5), *(ptr+i+6), *(ptr+i+7));
++		DBG_871X("############################# \n");
++	}
++}
++else if(pHalData->bDumpRxPkt ==3){
++	if(type== WIFI_DATA_TYPE){
++		int i;
++		DBG_871X("############################# \n");
++		
++		for(i=0; i<64;i=i+8)
++			DBG_871X("%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:\n", *(ptr+i),
++			*(ptr+i+1), *(ptr+i+2) ,*(ptr+i+3) ,*(ptr+i+4),*(ptr+i+5), *(ptr+i+6), *(ptr+i+7));
++		DBG_871X("############################# \n");
++	}
++}
++
++#endif
++	switch (type)
++	{
++		case WIFI_MGT_TYPE: //mgnt
++#ifdef CONFIG_IEEE80211W
++			if(validate_80211w_mgmt(adapter, precv_frame) == _FAIL)
++			{
++				retval = _FAIL;
++				break;
++			}
++#endif //CONFIG_IEEE80211W
++			
++			retval = validate_recv_mgnt_frame(adapter, precv_frame);
++			if (retval == _FAIL)
++			{
++				RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("validate_recv_mgnt_frame fail\n"));
++			}
++			retval = _FAIL; // only data frame return _SUCCESS
++			break;
++		case WIFI_CTRL_TYPE: //ctrl
++			retval = validate_recv_ctrl_frame(adapter, precv_frame);
++			if (retval == _FAIL)
++			{
++				RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("validate_recv_ctrl_frame fail\n"));
++			}
++			retval = _FAIL; // only data frame return _SUCCESS
++			break;
++		case WIFI_DATA_TYPE: //data
++			rtw_led_control(adapter, LED_CTL_RX);
++			pattrib->qos = (subtype & BIT(7))? 1:0;
++			retval = validate_recv_data_frame(adapter, precv_frame);
++			if (retval == _FAIL)
++			{
++				struct recv_priv *precvpriv = &adapter->recvpriv;
++				RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("validate_recv_data_frame fail\n"));
++				precvpriv->rx_drop++;
++			}
++			break;
++		default:
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("validate_recv_data_frame fail! type=0x%x\n", type));
++			#ifdef DBG_RX_DROP_FRAME
++			DBG_871X("DBG_RX_DROP_FRAME validate_recv_data_frame fail! type=0x%x\n", type);
++			#endif
++			retval = _FAIL;
++			break;
++	}
++
++exit:
++
++_func_exit_;
++
++	return retval;
++}
++
++
++//remove the wlanhdr and add the eth_hdr
++#if 1
++
++sint wlanhdr_to_ethhdr ( union recv_frame *precvframe);
++sint wlanhdr_to_ethhdr ( union recv_frame *precvframe)
++{
++	sint	rmv_len;
++	u16	eth_type, len;
++	u8	bsnaphdr;
++	u8	*psnap_type;
++	struct ieee80211_snap_hdr	*psnap;
++	
++	sint ret=_SUCCESS;
++	_adapter			*adapter =precvframe->u.hdr.adapter;
++	struct mlme_priv	*pmlmepriv = &adapter->mlmepriv;
++
++	u8	*ptr = get_recvframe_data(precvframe) ; // point to frame_ctrl field
++	struct rx_pkt_attrib *pattrib = & precvframe->u.hdr.attrib;
++
++_func_enter_;
++
++	if(pattrib->encrypt){
++		recvframe_pull_tail(precvframe, pattrib->icv_len);	
++	}
++
++	psnap=(struct ieee80211_snap_hdr	*)(ptr+pattrib->hdrlen + pattrib->iv_len);
++	psnap_type=ptr+pattrib->hdrlen + pattrib->iv_len+SNAP_SIZE;
++	/* convert hdr + possible LLC headers into Ethernet header */
++	//eth_type = (psnap_type[0] << 8) | psnap_type[1];
++	if((_rtw_memcmp(psnap, rtw_rfc1042_header, SNAP_SIZE) &&
++		(_rtw_memcmp(psnap_type, SNAP_ETH_TYPE_IPX, 2) == _FALSE) && 
++		(_rtw_memcmp(psnap_type, SNAP_ETH_TYPE_APPLETALK_AARP, 2)==_FALSE) )||
++		//eth_type != ETH_P_AARP && eth_type != ETH_P_IPX) ||
++		 _rtw_memcmp(psnap, rtw_bridge_tunnel_header, SNAP_SIZE)){
++		/* remove RFC1042 or Bridge-Tunnel encapsulation and replace EtherType */
++		bsnaphdr = _TRUE;
++	}
++	else {
++		/* Leave Ethernet header part of hdr and full payload */
++		bsnaphdr = _FALSE;
++	}
++
++	rmv_len = pattrib->hdrlen + pattrib->iv_len +(bsnaphdr?SNAP_SIZE:0);
++	len = precvframe->u.hdr.len - rmv_len;
++
++	RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("\n===pattrib->hdrlen: %x,  pattrib->iv_len:%x ===\n\n", pattrib->hdrlen,  pattrib->iv_len));
++
++	_rtw_memcpy(&eth_type, ptr+rmv_len, 2);
++	eth_type= ntohs((unsigned short )eth_type); //pattrib->ether_type
++	pattrib->eth_type = eth_type;
++
++	if ((check_fwstate(pmlmepriv, WIFI_MP_STATE) == _TRUE))	   	
++	{
++		ptr += rmv_len ;	
++		*ptr = 0x87;
++		*(ptr+1) = 0x12;
++
++		eth_type = 0x8712;
++		// append rx status for mp test packets
++		ptr = recvframe_pull(precvframe, (rmv_len-sizeof(struct ethhdr)+2)-24);
++		_rtw_memcpy(ptr, get_rxmem(precvframe), 24);
++		ptr+=24;
++	}
++	else {
++		ptr = recvframe_pull(precvframe, (rmv_len-sizeof(struct ethhdr)+ (bsnaphdr?2:0)));
++	}
++
++	_rtw_memcpy(ptr, pattrib->dst, ETH_ALEN);
++	_rtw_memcpy(ptr+ETH_ALEN, pattrib->src, ETH_ALEN);
++
++	if(!bsnaphdr) {
++		len = htons(len);
++		_rtw_memcpy(ptr+12, &len, 2);
++	}
++
++_func_exit_;	
++	return ret;
++
++}
++
++#else
++
++sint wlanhdr_to_ethhdr ( union recv_frame *precvframe)
++{
++	sint rmv_len;
++	u16 eth_type;
++	u8	bsnaphdr;
++	u8	*psnap_type;
++	struct ieee80211_snap_hdr	*psnap;
++
++	sint ret=_SUCCESS;
++	_adapter	*adapter =precvframe->u.hdr.adapter;
++	struct	mlme_priv	*pmlmepriv = &adapter->mlmepriv;
++
++	u8* ptr = get_recvframe_data(precvframe) ; // point to frame_ctrl field
++	struct rx_pkt_attrib *pattrib = & precvframe->u.hdr.attrib;
++	struct _vlan *pvlan = NULL;
++
++_func_enter_;
++
++	psnap=(struct ieee80211_snap_hdr	*)(ptr+pattrib->hdrlen + pattrib->iv_len);
++	psnap_type=ptr+pattrib->hdrlen + pattrib->iv_len+SNAP_SIZE;
++	if (psnap->dsap==0xaa && psnap->ssap==0xaa && psnap->ctrl==0x03)
++	{
++		if (_rtw_memcmp(psnap->oui, oui_rfc1042, WLAN_IEEE_OUI_LEN))
++			bsnaphdr=_TRUE;//wlan_pkt_format = WLAN_PKT_FORMAT_SNAP_RFC1042;	
++		else if (_rtw_memcmp(psnap->oui, SNAP_HDR_APPLETALK_DDP, WLAN_IEEE_OUI_LEN) &&
++			_rtw_memcmp(psnap_type, SNAP_ETH_TYPE_APPLETALK_DDP, 2) )
++			bsnaphdr=_TRUE;	//wlan_pkt_format = WLAN_PKT_FORMAT_APPLETALK;
++		else if (_rtw_memcmp( psnap->oui, oui_8021h, WLAN_IEEE_OUI_LEN))
++			bsnaphdr=_TRUE;	//wlan_pkt_format = WLAN_PKT_FORMAT_SNAP_TUNNEL;
++		else {
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("drop pkt due to invalid frame format!\n"));
++			ret= _FAIL;
++			goto exit;
++		}
++
++	} else
++		bsnaphdr=_FALSE;//wlan_pkt_format = WLAN_PKT_FORMAT_OTHERS;
++
++	rmv_len = pattrib->hdrlen + pattrib->iv_len +(bsnaphdr?SNAP_SIZE:0);
++	RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("===pattrib->hdrlen: %x,  pattrib->iv_len:%x ===\n", pattrib->hdrlen,  pattrib->iv_len));
++
++	if (check_fwstate(pmlmepriv, WIFI_MP_STATE) == _TRUE)
++	{
++		ptr += rmv_len ;
++		*ptr = 0x87;
++		*(ptr+1) = 0x12;
++
++		//back to original pointer
++		ptr -= rmv_len;
++	}
++
++	ptr += rmv_len ;
++
++	_rtw_memcpy(&eth_type, ptr, 2);
++	eth_type= ntohs((unsigned short )eth_type); //pattrib->ether_type
++	ptr +=2;
++
++	if(pattrib->encrypt){
++		recvframe_pull_tail(precvframe, pattrib->icv_len);
++	}
++
++	if(eth_type == 0x8100) //vlan
++	{
++		pvlan = (struct _vlan *) ptr;
++
++		//eth_type = get_vlan_encap_proto(pvlan);
++		//eth_type = pvlan->h_vlan_encapsulated_proto;//?
++		rmv_len += 4;
++		ptr+=4;
++	}
++
++	if(eth_type==0x0800)//ip
++	{
++		//struct iphdr*  piphdr = (struct iphdr*) ptr;
++		//__u8 tos = (unsigned char)(pattrib->priority & 0xff);
++
++		//piphdr->tos = tos;
++
++		//if (piphdr->protocol == 0x06)
++		//{
++		//	RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("@@@===recv tcp len:%d @@@===\n", precvframe->u.hdr.len));
++		//}
++	}
++	else if(eth_type==0x8712)// append rx status for mp test packets
++	{
++		//ptr -= 16;
++		//_rtw_memcpy(ptr, get_rxmem(precvframe), 16);
++	}
++	else
++	{
++#ifdef PLATFORM_OS_XP
++		NDIS_PACKET_8021Q_INFO VlanPriInfo;
++		UINT32 UserPriority = precvframe->u.hdr.attrib.priority;
++		UINT32 VlanID = (pvlan!=NULL ? get_vlan_id(pvlan) : 0 );
++
++		VlanPriInfo.Value =          // Get current value.
++				NDIS_PER_PACKET_INFO_FROM_PACKET(precvframe->u.hdr.pkt, Ieee8021QInfo);
++
++		VlanPriInfo.TagHeader.UserPriority = UserPriority;
++		VlanPriInfo.TagHeader.VlanId =  VlanID ;
++
++		VlanPriInfo.TagHeader.CanonicalFormatId = 0; // Should be zero.
++		VlanPriInfo.TagHeader.Reserved = 0; // Should be zero.
++		NDIS_PER_PACKET_INFO_FROM_PACKET(precvframe->u.hdr.pkt, Ieee8021QInfo) = VlanPriInfo.Value;
++#endif
++	}
++
++	if(eth_type==0x8712)// append rx status for mp test packets
++	{
++		ptr = recvframe_pull(precvframe, (rmv_len-sizeof(struct ethhdr)+2)-24);
++		_rtw_memcpy(ptr, get_rxmem(precvframe), 24);
++		ptr+=24;
++	}
++	else
++		ptr = recvframe_pull(precvframe, (rmv_len-sizeof(struct ethhdr)+2));
++
++	_rtw_memcpy(ptr, pattrib->dst, ETH_ALEN);
++	_rtw_memcpy(ptr+ETH_ALEN, pattrib->src, ETH_ALEN);
++
++	eth_type = htons((unsigned short)eth_type) ;
++	_rtw_memcpy(ptr+12, &eth_type, 2);
++
++exit:
++
++_func_exit_;
++
++	return ret;
++}
++#endif
++
++
++#ifdef CONFIG_SDIO_HCI
++#ifdef PLATFORM_LINUX
++static void recvframe_expand_pkt(
++	PADAPTER padapter,
++	union recv_frame *prframe)
++{
++	struct recv_frame_hdr *pfhdr;
++	_pkt *ppkt;
++	u8 shift_sz;
++	u32 alloc_sz;
++
++
++	pfhdr = &prframe->u.hdr;
++
++	//	6 is for IP header 8 bytes alignment in QoS packet case.
++	if (pfhdr->attrib.qos)
++		shift_sz = 6;
++	else
++		shift_sz = 0;
++
++	// for first fragment packet, need to allocate
++	// (1536 + RXDESC_SIZE + drvinfo_sz) to reassemble packet
++	//	8 is for skb->data 8 bytes alignment.
++//	alloc_sz = _RND(1536 + RXDESC_SIZE + pfhdr->attrib.drvinfosize + shift_sz + 8, 128);
++	alloc_sz = 1664; // round (1536 + 24 + 32 + shift_sz + 8) to 128 bytes alignment
++
++	//3 1. alloc new skb
++	// prepare extra space for 4 bytes alignment
++	ppkt = rtw_skb_alloc(alloc_sz);
++
++	if (!ppkt) return; // no way to expand
++
++	//3 2. Prepare new skb to replace & release old skb
++	// force ppkt->data at 8-byte alignment address
++	skb_reserve(ppkt, 8 - ((SIZE_PTR)ppkt->data & 7));
++	// force ip_hdr at 8-byte alignment address according to shift_sz
++	skb_reserve(ppkt, shift_sz);
++
++	// copy data to new pkt
++	_rtw_memcpy(skb_put(ppkt, pfhdr->len), pfhdr->rx_data, pfhdr->len);
++
++	rtw_skb_free(pfhdr->pkt);
++
++	// attach new pkt to recvframe
++	pfhdr->pkt = ppkt;
++	pfhdr->rx_head = ppkt->head;
++	pfhdr->rx_data = ppkt->data;
++	pfhdr->rx_tail = skb_tail_pointer(ppkt);
++	pfhdr->rx_end = skb_end_pointer(ppkt);
++}
++#else
++#warning "recvframe_expand_pkt not implement, defrag may crash system"
++#endif
++#endif
++
++//perform defrag
++union recv_frame * recvframe_defrag(_adapter *adapter,_queue *defrag_q);
++union recv_frame * recvframe_defrag(_adapter *adapter,_queue *defrag_q)
++{
++	_list	 *plist, *phead;
++	u8	*data,wlanhdr_offset;
++	u8	curfragnum;
++	struct recv_frame_hdr *pfhdr,*pnfhdr;
++	union recv_frame* prframe, *pnextrframe;
++	_queue	*pfree_recv_queue;
++
++_func_enter_;
++
++	curfragnum=0;
++	pfree_recv_queue=&adapter->recvpriv.free_recv_queue;
++
++	phead = get_list_head(defrag_q);
++	plist = get_next(phead);
++	prframe = LIST_CONTAINOR(plist, union recv_frame, u);
++	pfhdr=&prframe->u.hdr;
++	rtw_list_delete(&(prframe->u.list));
++
++	if(curfragnum!=pfhdr->attrib.frag_num)
++	{
++		//the first fragment number must be 0
++		//free the whole queue
++		rtw_free_recvframe(prframe, pfree_recv_queue);
++		rtw_free_recvframe_queue(defrag_q, pfree_recv_queue);
++
++		return NULL;
++	}
++
++#ifdef CONFIG_SDIO_HCI
++	recvframe_expand_pkt(adapter, prframe);
++#endif
++
++	curfragnum++;
++
++	plist= get_list_head(defrag_q);
++
++	plist = get_next(plist);
++
++	data=get_recvframe_data(prframe);
++
++	while(rtw_end_of_queue_search(phead, plist) == _FALSE)
++	{
++		pnextrframe = LIST_CONTAINOR(plist, union recv_frame , u);
++		pnfhdr=&pnextrframe->u.hdr;
++
++
++		//check the fragment sequence  (2nd ~n fragment frame)
++
++		if(curfragnum!=pnfhdr->attrib.frag_num)
++		{
++			//the fragment number must be increasing  (after decache)
++			//release the defrag_q & prframe
++			rtw_free_recvframe(prframe, pfree_recv_queue);
++			rtw_free_recvframe_queue(defrag_q, pfree_recv_queue);
++			return NULL;
++		}
++
++		curfragnum++;
++
++		//copy the 2nd~n fragment frame's payload to the first fragment
++		//get the 2nd~last fragment frame's payload
++
++		wlanhdr_offset = pnfhdr->attrib.hdrlen + pnfhdr->attrib.iv_len;
++
++		recvframe_pull(pnextrframe, wlanhdr_offset);
++
++		//append  to first fragment frame's tail (if privacy frame, pull the ICV)
++		recvframe_pull_tail(prframe, pfhdr->attrib.icv_len);
++
++		//memcpy
++		_rtw_memcpy(pfhdr->rx_tail, pnfhdr->rx_data, pnfhdr->len);
++
++		recvframe_put(prframe, pnfhdr->len);
++
++		pfhdr->attrib.icv_len=pnfhdr->attrib.icv_len;
++		plist = get_next(plist);
++
++	};
++
++	//free the defrag_q queue and return the prframe
++	rtw_free_recvframe_queue(defrag_q, pfree_recv_queue);
++
++	RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("Performance defrag!!!!!\n"));
++
++_func_exit_;
++
++	return prframe;
++}
++
++//check if need to defrag, if needed queue the frame to defrag_q
++union recv_frame* recvframe_chk_defrag(PADAPTER padapter, union recv_frame *precv_frame)
++{
++	u8	ismfrag;
++	u8	fragnum;
++	u8	*psta_addr;
++	struct recv_frame_hdr *pfhdr;
++	struct sta_info *psta;
++	struct sta_priv *pstapriv;
++	_list *phead;
++	union recv_frame *prtnframe = NULL;
++	_queue *pfree_recv_queue, *pdefrag_q;
++
++_func_enter_;
++
++	pstapriv = &padapter->stapriv;
++
++	pfhdr = &precv_frame->u.hdr;
++
++	pfree_recv_queue = &padapter->recvpriv.free_recv_queue;
++
++	//need to define struct of wlan header frame ctrl
++	ismfrag = pfhdr->attrib.mfrag;
++	fragnum = pfhdr->attrib.frag_num;
++
++	psta_addr = pfhdr->attrib.ta;
++	psta = rtw_get_stainfo(pstapriv, psta_addr);
++	if (psta == NULL)
++	{
++		u8 type = GetFrameType(pfhdr->rx_data);
++		if (type != WIFI_DATA_TYPE) {
++			psta = rtw_get_bcmc_stainfo(padapter);
++			pdefrag_q = &psta->sta_recvpriv.defrag_q;
++		} else
++			pdefrag_q = NULL;
++	}
++	else
++		pdefrag_q = &psta->sta_recvpriv.defrag_q;
++
++	if ((ismfrag==0) && (fragnum==0))
++	{
++		prtnframe = precv_frame;//isn't a fragment frame
++	}
++
++	if (ismfrag==1)
++	{
++		//0~(n-1) fragment frame
++		//enqueue to defraf_g
++		if(pdefrag_q != NULL)
++		{
++			if(fragnum==0)
++			{
++				//the first fragment
++				if(_rtw_queue_empty(pdefrag_q) == _FALSE)
++				{
++					//free current defrag_q
++					rtw_free_recvframe_queue(pdefrag_q, pfree_recv_queue);
++				}
++			}
++
++
++			//Then enqueue the 0~(n-1) fragment into the defrag_q
++
++			//_rtw_spinlock(&pdefrag_q->lock);
++			phead = get_list_head(pdefrag_q);
++			rtw_list_insert_tail(&pfhdr->list, phead);
++			//_rtw_spinunlock(&pdefrag_q->lock);
++
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("Enqueuq: ismfrag = %d, fragnum= %d\n", ismfrag,fragnum));
++
++			prtnframe=NULL;
++
++		}
++		else
++		{
++			//can't find this ta's defrag_queue, so free this recv_frame
++			rtw_free_recvframe(precv_frame, pfree_recv_queue);
++			prtnframe=NULL;
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("Free because pdefrag_q ==NULL: ismfrag = %d, fragnum= %d\n", ismfrag, fragnum));
++		}
++
++	}
++
++	if((ismfrag==0)&&(fragnum!=0))
++	{
++		//the last fragment frame
++		//enqueue the last fragment
++		if(pdefrag_q != NULL)
++		{
++			//_rtw_spinlock(&pdefrag_q->lock);
++			phead = get_list_head(pdefrag_q);
++			rtw_list_insert_tail(&pfhdr->list,phead);
++			//_rtw_spinunlock(&pdefrag_q->lock);
++
++			//call recvframe_defrag to defrag
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("defrag: ismfrag = %d, fragnum= %d\n", ismfrag, fragnum));
++			precv_frame = recvframe_defrag(padapter, pdefrag_q);
++			prtnframe=precv_frame;
++
++		}
++		else
++		{
++			//can't find this ta's defrag_queue, so free this recv_frame
++			rtw_free_recvframe(precv_frame, pfree_recv_queue);
++			prtnframe=NULL;
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("Free because pdefrag_q ==NULL: ismfrag = %d, fragnum= %d\n", ismfrag,fragnum));
++		}
++
++	}
++
++
++	if((prtnframe!=NULL)&&(prtnframe->u.hdr.attrib.privacy))
++	{
++		//after defrag we must check tkip mic code
++		if(recvframe_chkmic(padapter,  prtnframe)==_FAIL)
++		{
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("recvframe_chkmic(padapter,  prtnframe)==_FAIL\n"));
++			rtw_free_recvframe(prtnframe,pfree_recv_queue);
++			prtnframe=NULL;
++		}
++	}
++
++_func_exit_;
++
++	return prtnframe;
++
++}
++
++#define ENDIAN_FREE 1
++
++int amsdu_to_msdu(_adapter *padapter, union recv_frame *prframe);
++int amsdu_to_msdu(_adapter *padapter, union recv_frame *prframe)
++{
++#if defined (PLATFORM_LINUX) || defined (PLATFORM_FREEBSD)  //for amsdu TP improvement,Creator: Thomas 
++	int	a_len, padding_len;
++	u16	eth_type, nSubframe_Length;	
++	u8	nr_subframes, i;
++	unsigned char *pdata;
++	struct rx_pkt_attrib *pattrib;
++#ifndef PLATFORM_FREEBSD
++	unsigned char *data_ptr;
++	_pkt *sub_skb,*subframes[MAX_SUBFRAME_COUNT];
++#endif //PLATFORM_FREEBSD
++	struct recv_priv *precvpriv = &padapter->recvpriv;
++	_queue *pfree_recv_queue = &(precvpriv->free_recv_queue);
++	int	ret = _SUCCESS;
++#ifdef PLATFORM_FREEBSD
++	struct mbuf *sub_m=NULL, *subframes[MAX_SUBFRAME_COUNT];	
++	u8 *ptr,offset;
++#endif //PLATFORM_FREEBSD
++	nr_subframes = 0;
++
++	pattrib = &prframe->u.hdr.attrib;
++
++	recvframe_pull(prframe, prframe->u.hdr.attrib.hdrlen);
++	
++	if(prframe->u.hdr.attrib.iv_len >0)
++	{
++		recvframe_pull(prframe, prframe->u.hdr.attrib.iv_len);
++	}
++
++	a_len = prframe->u.hdr.len;
++
++	pdata = prframe->u.hdr.rx_data;
++
++	while(a_len > ETH_HLEN) {
++		
++		/* Offset 12 denote 2 mac address */
++#ifdef ENDIAN_FREE
++		//nSubframe_Length = ntohs(*((u16*)(pdata + 12)));
++		nSubframe_Length = RTW_GET_BE16(pdata + 12);
++#else // ENDIAN_FREE
++		nSubframe_Length = *((u16*)(pdata + 12));
++		//==m==>change the length order
++		nSubframe_Length = (nSubframe_Length>>8) + (nSubframe_Length<<8);
++		//ntohs(nSubframe_Length);
++#endif // ENDIAN_FREE
++
++		if( a_len < (ETHERNET_HEADER_SIZE + nSubframe_Length) ) {
++			DBG_871X("nRemain_Length is %d and nSubframe_Length is : %d\n",a_len,nSubframe_Length);
++			goto exit;
++		}
++
++#ifndef PLATFORM_FREEBSD
++		/* move the data point to data content */
++		pdata += ETH_HLEN;
++		a_len -= ETH_HLEN;
++
++		/* Allocate new skb for releasing to upper layer */
++#ifdef CONFIG_SKB_COPY
++		sub_skb = rtw_skb_alloc(nSubframe_Length + 12);
++		if(sub_skb)
++		{
++			skb_reserve(sub_skb, 12);
++			data_ptr = (u8 *)skb_put(sub_skb, nSubframe_Length);
++			_rtw_memcpy(data_ptr, pdata, nSubframe_Length);
++		}
++		else
++#endif // CONFIG_SKB_COPY
++		{
++			sub_skb = rtw_skb_clone(prframe->u.hdr.pkt);
++			if(sub_skb)
++			{
++				sub_skb->data = pdata;
++				sub_skb->len = nSubframe_Length;
++				skb_set_tail_pointer(sub_skb, nSubframe_Length);
++			}
++			else
++			{
++				DBG_871X("rtw_skb_clone() Fail!!! , nr_subframes = %d\n",nr_subframes);
++				break;
++			}
++		}
++
++#else   // PLATFORM_FREEBSD
++
++		//PLATFORM_FREEBSD
++		//Allocate a mbuff,  
++		//sub_m =m_devget(pdata, nSubframe_Length+12, 12, padapter->pifp,NULL);
++		sub_m =m_devget(pdata, nSubframe_Length+ETH_HLEN, ETHER_ALIGN, padapter->pifp,NULL);
++
++		pdata += ETH_HLEN;
++		a_len -= ETH_HLEN;
++#endif	// PLATFORM_FREEBSD	
++
++#ifndef PLATFORM_FREEBSD
++		//sub_skb->dev = padapter->pnetdev;
++		subframes[nr_subframes++] = sub_skb;
++#else  //PLATFORM_FREEBSD
++		//PLATFORM_FREEBSD
++		subframes[nr_subframes++] = sub_m;
++#endif  //PLATFORM_FREEBSD
++
++		if(nr_subframes >= MAX_SUBFRAME_COUNT) {
++			DBG_871X("ParseSubframe(): Too many Subframes! Packets dropped!\n");
++			break;
++		}
++
++		pdata += nSubframe_Length;
++		a_len -= nSubframe_Length;
++		if(a_len != 0) {
++			padding_len = 4 - ((nSubframe_Length + ETH_HLEN) & (4-1));
++			if(padding_len == 4) {
++				padding_len = 0;
++			}
++
++			if(a_len < padding_len) {
++				goto exit;
++			}
++			pdata += padding_len;
++			a_len -= padding_len;
++		}
++	}
++
++	for(i=0; i<nr_subframes; i++){
++#ifndef PLATFORM_FREEBSD
++		sub_skb = subframes[i];
++		/* convert hdr + possible LLC headers into Ethernet header */
++#ifdef ENDIAN_FREE
++		//eth_type = ntohs(*(u16*)&sub_skb->data[6]);
++		eth_type = RTW_GET_BE16(&sub_skb->data[6]);
++#else // ENDIAN_FREE		
++		eth_type = (sub_skb->data[6] << 8) | sub_skb->data[7];
++#endif // ENDIAN_FREE
++		if (sub_skb->len >= 8 &&
++			((_rtw_memcmp(sub_skb->data, rtw_rfc1042_header, SNAP_SIZE) &&
++			  eth_type != ETH_P_AARP && eth_type != ETH_P_IPX) ||
++			 _rtw_memcmp(sub_skb->data, rtw_bridge_tunnel_header, SNAP_SIZE) )) {
++			/* remove RFC1042 or Bridge-Tunnel encapsulation and replace EtherType */
++			skb_pull(sub_skb, SNAP_SIZE);
++			_rtw_memcpy(skb_push(sub_skb, ETH_ALEN), pattrib->src, ETH_ALEN);
++			_rtw_memcpy(skb_push(sub_skb, ETH_ALEN), pattrib->dst, ETH_ALEN);
++		} else {
++			u16 len;
++			/* Leave Ethernet header part of hdr and full payload */
++			len = htons(sub_skb->len);
++			_rtw_memcpy(skb_push(sub_skb, 2), &len, 2);
++			_rtw_memcpy(skb_push(sub_skb, ETH_ALEN), pattrib->src, ETH_ALEN);
++			_rtw_memcpy(skb_push(sub_skb, ETH_ALEN), pattrib->dst, ETH_ALEN);
++		}
++
++		/* Indicat the packets to upper layer */
++		if (sub_skb) {
++			//memset(sub_skb->cb, 0, sizeof(sub_skb->cb));
++
++#ifdef CONFIG_BR_EXT
++			// Insert NAT2.5 RX here!
++			struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++			void *br_port = NULL;
++
++#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35))
++			br_port = padapter->pnetdev->br_port;
++#else   // (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35))
++			rcu_read_lock();
++			br_port = rcu_dereference(padapter->pnetdev->rx_handler_data);
++			rcu_read_unlock();
++#endif  // (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35))
++
++
++			if( br_port && (check_fwstate(pmlmepriv, WIFI_STATION_STATE|WIFI_ADHOC_STATE) == _TRUE) )
++			{
++				int nat25_handle_frame(_adapter *priv, struct sk_buff *skb);
++				if (nat25_handle_frame(padapter, sub_skb) == -1) {
++					//priv->ext_stats.rx_data_drops++;
++					//DEBUG_ERR("RX DROP: nat25_handle_frame fail!\n");
++					//return FAIL;
++					
++#if 1
++					// bypass this frame to upper layer!!
++#else
++					rtw_skb_free(sub_skb);
++					continue;
++#endif
++				}							
++			}
++#endif	// CONFIG_BR_EXT
++
++			sub_skb->protocol = eth_type_trans(sub_skb, padapter->pnetdev);
++			sub_skb->dev = padapter->pnetdev;
++
++#ifdef CONFIG_TCP_CSUM_OFFLOAD_RX
++			if ( (pattrib->tcpchk_valid == 1) && (pattrib->tcp_chkrpt == 1) ) {
++				sub_skb->ip_summed = CHECKSUM_UNNECESSARY;
++			} else {
++				sub_skb->ip_summed = CHECKSUM_NONE;
++			}
++#else /* !CONFIG_TCP_CSUM_OFFLOAD_RX */
++			sub_skb->ip_summed = CHECKSUM_NONE;
++#endif //CONFIG_TCP_CSUM_OFFLOAD_RX
++
++			rtw_netif_rx(padapter->pnetdev, sub_skb);
++		}
++#else //PLATFORM_FREEBSD
++
++		//PLATFORM_FREEBSD
++		sub_m = subframes[i];
++		ptr=mtod(sub_m, u8 *);
++		offset=ETH_HLEN;
++		/* convert hdr + possible LLC headers into Ethernet header */
++#ifdef ENDIAN_FREE
++		eth_type = ntohs(*(u16*)&ptr[offset+6]);
++#else // ENDIAN_FREE
++		eth_type = (  ptr[offset+6] << 8) | ptr[offset+7];
++#endif // ENDIAN_FREE
++		if (sub_m->m_pkthdr.len >= ETH_HLEN+8 &&
++			((_rtw_memcmp(ptr+ETH_HLEN, rtw_rfc1042_header, SNAP_SIZE) &&
++			  eth_type != ETH_P_AARP && eth_type != ETH_P_IPX) ||
++			 _rtw_memcmp(ptr+ETH_HLEN, rtw_bridge_tunnel_header, SNAP_SIZE) )) {
++			/* remove RFC1042 or Bridge-Tunnel encapsulation and replace EtherType */
++			offset+=SNAP_SIZE;
++			_rtw_memcpy(&ptr[offset-ETH_ALEN], pattrib->src, ETH_ALEN);
++			offset-=ETH_ALEN;
++			_rtw_memcpy(&ptr[offset-ETH_ALEN], pattrib->dst, ETH_ALEN);
++			offset-=ETH_ALEN;
++		} else {
++			u16 len;
++			/* Leave Ethernet header part of hdr and full payload */
++			len = htons(sub_m->m_pkthdr.len-offset);
++			_rtw_memcpy(&ptr[offset- 2], &len, 2);
++			offset-=2;
++			_rtw_memcpy(&ptr[offset-ETH_ALEN], pattrib->src, ETH_ALEN);
++			offset-=ETH_ALEN;
++			_rtw_memcpy(&ptr[offset-ETH_ALEN], pattrib->dst, ETH_ALEN);
++			offset-=ETH_ALEN;
++		}
++
++		m_adj(sub_m,offset);
++
++		/* Indicat the packets to upper layer */
++		if (sub_m) {
++
++#if 0
++#ifdef CONFIG_TCP_CSUM_OFFLOAD_RX
++			if ( (pattrib->tcpchk_valid == 1) && (pattrib->tcp_chkrpt == 1) ) {
++				sub_skb->ip_summed = CHECKSUM_UNNECESSARY;
++			} else {
++				sub_skb->ip_summed = CHECKSUM_NONE;
++			}
++#else /* !CONFIG_TCP_CSUM_OFFLOAD_RX */
++			sub_skb->ip_summed = CHECKSUM_NONE;
++#endif //CONFIG_TCP_CSUM_OFFLOAD_RX
++#endif //0
++
++			if ( ((u32)(mtod(sub_m, caddr_t) + 14) % 4) != 0)
++				printf("%s()-%d: mtod(sub_m) = %p\n", __FUNCTION__, __LINE__, mtod(sub_m, caddr_t));
++#ifdef CONFIG_RX_INDICATE_QUEUE
++			IF_ENQUEUE(&precvpriv->rx_indicate_queue, sub_m);
++			if (_IF_QLEN(&precvpriv->rx_indicate_queue) <= 1) {
++				taskqueue_enqueue(taskqueue_thread, &precvpriv->rx_indicate_tasklet);
++			}
++#else	// CONFIG_RX_INDICATE_QUEUE
++			(*padapter->pifp->if_input)(padapter->pifp, sub_m);	
++#endif	// CONFIG_RX_INDICATE_QUEUE
++		}		
++
++#endif //PLATFORM_FREEBSD
++	}
++
++exit:
++
++	prframe->u.hdr.len=0;
++	rtw_free_recvframe(prframe, pfree_recv_queue);//free this recv_frame
++	
++	return ret;
++#else  // || defined (PLATFORM_LINUX) || defined (PLATFORM_FREEBSD) 
++#ifdef PLATFORM_WINDOWS
++	_irqL irql;
++#endif //PLATFORM_WINDOWS
++	unsigned char *ptr, *pdata, *pbuf, *psnap_type;
++	union recv_frame *pnrframe, *pnrframe_new;
++	int a_len, mv_len, padding_len;
++	u16 eth_type, type_len;
++	u8 bsnaphdr;
++	struct ieee80211_snap_hdr	*psnap;
++	struct _vlan *pvlan;
++	struct recv_priv *precvpriv = &padapter->recvpriv;
++	_queue *pfree_recv_queue = &(precvpriv->free_recv_queue);
++	int ret = _SUCCESS;
++#ifdef PLATFORM_WINDOWS
++	struct recv_buf *precvbuf = prframe->u.hdr.precvbuf;
++#endif //PLATFORM_WINDOWS
++	a_len = prframe->u.hdr.len - prframe->u.hdr.attrib.hdrlen;
++
++	recvframe_pull(prframe, prframe->u.hdr.attrib.hdrlen);
++
++	if(prframe->u.hdr.attrib.iv_len >0)
++	{
++		recvframe_pull(prframe, prframe->u.hdr.attrib.iv_len);
++	}
++
++	pdata = prframe->u.hdr.rx_data;
++
++	prframe->u.hdr.len=0;
++
++	pnrframe = prframe;
++
++
++	do{
++
++		mv_len=0;
++		pnrframe->u.hdr.rx_data = pnrframe->u.hdr.rx_tail = pdata;
++		ptr = pdata;
++
++
++		_rtw_memcpy(pnrframe->u.hdr.attrib.dst, ptr, ETH_ALEN);
++		ptr+=ETH_ALEN;
++		_rtw_memcpy(pnrframe->u.hdr.attrib.src, ptr, ETH_ALEN);
++		ptr+=ETH_ALEN;
++
++		_rtw_memcpy(&type_len, ptr, 2);
++		type_len= ntohs((unsigned short )type_len);
++		ptr +=2;
++		mv_len += ETH_HLEN;
++
++		recvframe_put(pnrframe, type_len+ETH_HLEN);//update tail;
++
++		if(pnrframe->u.hdr.rx_data >= pnrframe->u.hdr.rx_tail || type_len<8)
++		{
++			//panic("pnrframe->u.hdr.rx_data >= pnrframe->u.hdr.rx_tail || type_len<8\n");
++
++			rtw_free_recvframe(pnrframe, pfree_recv_queue);
++
++			goto exit;
++		}
++
++		psnap=(struct ieee80211_snap_hdr *)(ptr);
++		psnap_type=ptr+SNAP_SIZE;
++		if (psnap->dsap==0xaa && psnap->ssap==0xaa && psnap->ctrl==0x03)
++		{
++			if ( _rtw_memcmp(psnap->oui, oui_rfc1042, WLAN_IEEE_OUI_LEN))
++			{
++				bsnaphdr=_TRUE;//wlan_pkt_format = WLAN_PKT_FORMAT_SNAP_RFC1042;
++			}
++			else if (_rtw_memcmp(psnap->oui, SNAP_HDR_APPLETALK_DDP, WLAN_IEEE_OUI_LEN) &&
++					_rtw_memcmp(psnap_type, SNAP_ETH_TYPE_APPLETALK_DDP, 2) )
++			{
++				bsnaphdr=_TRUE;	//wlan_pkt_format = WLAN_PKT_FORMAT_APPLETALK;
++			}
++			else if (_rtw_memcmp( psnap->oui, oui_8021h, WLAN_IEEE_OUI_LEN))
++			{
++				bsnaphdr=_TRUE;	//wlan_pkt_format = WLAN_PKT_FORMAT_SNAP_TUNNEL;
++			}
++			else
++			{
++				RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("drop pkt due to invalid frame format!\n"));
++
++				//KeBugCheckEx(0x87123333, 0xe0, 0x4c, 0x87, 0xdd);
++
++				//panic("0x87123333, 0xe0, 0x4c, 0x87, 0xdd\n");
++
++				rtw_free_recvframe(pnrframe, pfree_recv_queue);
++
++				goto exit;
++			}
++
++		}
++		else
++		{
++			bsnaphdr=_FALSE;//wlan_pkt_format = WLAN_PKT_FORMAT_OTHERS;
++		}
++
++		ptr += (bsnaphdr?SNAP_SIZE:0);
++		_rtw_memcpy(&eth_type, ptr, 2);
++		eth_type= ntohs((unsigned short )eth_type); //pattrib->ether_type
++
++		mv_len+= 2+(bsnaphdr?SNAP_SIZE:0);
++		ptr += 2;//now move to iphdr;
++
++		pvlan = NULL;
++		if(eth_type == 0x8100) //vlan
++		{
++			pvlan = (struct _vlan *)ptr;
++			ptr+=4;
++			mv_len+=4;
++		}
++
++		if(eth_type==0x0800)//ip
++		{
++			struct iphdr*  piphdr = (struct iphdr*)ptr;
++
++
++			if (piphdr->protocol == 0x06)
++			{
++				RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("@@@===recv tcp len:%d @@@===\n", pnrframe->u.hdr.len));
++			}
++		}
++#ifdef PLATFORM_OS_XP
++		else
++		{
++			NDIS_PACKET_8021Q_INFO VlanPriInfo;
++			UINT32 UserPriority = pnrframe->u.hdr.attrib.priority;
++			UINT32 VlanID = (pvlan!=NULL ? get_vlan_id(pvlan) : 0 );
++
++			VlanPriInfo.Value =          // Get current value.
++					NDIS_PER_PACKET_INFO_FROM_PACKET(pnrframe->u.hdr.pkt, Ieee8021QInfo);
++
++			VlanPriInfo.TagHeader.UserPriority = UserPriority;
++			VlanPriInfo.TagHeader.VlanId =  VlanID;
++
++			VlanPriInfo.TagHeader.CanonicalFormatId = 0; // Should be zero.
++			VlanPriInfo.TagHeader.Reserved = 0; // Should be zero.
++			NDIS_PER_PACKET_INFO_FROM_PACKET(pnrframe->u.hdr.pkt, Ieee8021QInfo) = VlanPriInfo.Value;
++
++		}
++#endif //PLATFORM_OS_XP
++
++		pbuf = recvframe_pull(pnrframe, (mv_len-sizeof(struct ethhdr)));
++
++		_rtw_memcpy(pbuf, pnrframe->u.hdr.attrib.dst, ETH_ALEN);
++		_rtw_memcpy(pbuf+ETH_ALEN, pnrframe->u.hdr.attrib.src, ETH_ALEN);
++
++		eth_type = htons((unsigned short)eth_type) ;
++		_rtw_memcpy(pbuf+12, &eth_type, 2);
++
++		padding_len = (4) - ((type_len + ETH_HLEN)&(4-1));
++
++		a_len -= (type_len + ETH_HLEN + padding_len) ;
++
++
++#if 0
++
++	if(a_len > ETH_HLEN)
++	{
++		pnrframe_new = rtw_alloc_recvframe(pfree_recv_queue);
++		if(pnrframe_new)
++		{
++			_pkt *pskb_copy;
++			unsigned int copy_len  = pnrframe->u.hdr.len;
++
++			_rtw_init_listhead(&pnrframe_new->u.hdr.list);
++
++			pskb_copy = rtw_skb_alloc(copy_len+64);
++
++			if(pskb_copy==NULL)
++			{
++				DBG_871X("amsdu_to_msdu:can not all(ocate memory for skb copy\n");
++			}
++
++			pnrframe_new->u.hdr.pkt = pskb_copy;
++
++			_rtw_memcpy(pskb_copy->data, pnrframe->u.hdr.rx_data, copy_len);
++
++			pnrframe_new->u.hdr.rx_data = pnrframe->u.hdr.rx_data;
++			pnrframe_new->u.hdr.rx_tail = pnrframe->u.hdr.rx_data + copy_len;
++
++
++			if ((padapter->bDriverStopped ==_FALSE)&&( padapter->bSurpriseRemoved==_FALSE))
++			{
++				rtw_recv_indicatepkt(padapter, pnrframe_new);//indicate this recv_frame
++			}
++			else
++			{
++				rtw_free_recvframe(pnrframe_new, pfree_recv_queue);//free this recv_frame
++			}
++
++		}
++		else
++		{
++			DBG_871X("amsdu_to_msdu:can not allocate memory for pnrframe_new\n");
++		}
++
++	}
++	else
++	{
++		if ((padapter->bDriverStopped ==_FALSE)&&( padapter->bSurpriseRemoved==_FALSE))
++		{
++			rtw_recv_indicatepkt(padapter, pnrframe);//indicate this recv_frame
++		}
++		else
++		{
++			rtw_free_recvframe(pnrframe, pfree_recv_queue);//free this recv_frame
++		}
++
++		pnrframe = NULL;
++
++	}
++
++#else // 0
++
++		//padding_len = (4) - ((type_len + ETH_HLEN)&(4-1));
++
++		//a_len -= (type_len + ETH_HLEN + padding_len) ;
++
++		pnrframe_new = NULL;
++
++
++		if(a_len > ETH_HLEN)
++		{
++			pnrframe_new = rtw_alloc_recvframe(pfree_recv_queue);
++
++			if(pnrframe_new)
++			{
++
++
++				//pnrframe_new->u.hdr.precvbuf = precvbuf;//precvbuf is assigned before call rtw_init_recvframe()
++				//rtw_init_recvframe(pnrframe_new, precvpriv);
++				{
++#ifdef PLATFORM_LINUX
++						_pkt *pskb = pnrframe->u.hdr.pkt;
++#endif //PLATFORM_LINUX						
++						_rtw_init_listhead(&pnrframe_new->u.hdr.list);
++
++						pnrframe_new->u.hdr.len=0;
++
++#ifdef PLATFORM_LINUX
++						if(pskb)
++						{
++							pnrframe_new->u.hdr.pkt = rtw_skb_clone(pskb);
++						}
++#endif //PLATFORM_LINUX
++
++				}
++
++				pdata += (type_len + ETH_HLEN + padding_len);
++				pnrframe_new->u.hdr.rx_head = pnrframe_new->u.hdr.rx_data = pnrframe_new->u.hdr.rx_tail = pdata;
++				pnrframe_new->u.hdr.rx_end = pdata + a_len + padding_len;//
++
++#ifdef PLATFORM_WINDOWS
++				pnrframe_new->u.hdr.precvbuf=precvbuf;
++				_enter_critical_bh(&precvbuf->recvbuf_lock, &irql);
++				precvbuf->ref_cnt++;
++				_exit_critical_bh(&precvbuf->recvbuf_lock, &irql);
++#endif //PLATFORM_WINDOWS
++
++			}
++			else
++			{
++				//panic("pnrframe_new=%x\n", pnrframe_new);
++			}
++		}
++
++
++		if ((padapter->bDriverStopped ==_FALSE)&&( padapter->bSurpriseRemoved==_FALSE) )
++		{
++			rtw_recv_indicatepkt(padapter, pnrframe);//indicate this recv_frame
++		}
++		else
++		{
++			rtw_free_recvframe(pnrframe, pfree_recv_queue);//free this recv_frame
++		}
++
++
++		pnrframe = NULL;
++		if(pnrframe_new)
++		{
++			pnrframe = pnrframe_new;
++		}
++
++
++#endif // end defined (PLATFORM_LINUX) || defined (PLATFORM_FREEBSD) 
++
++	}while(pnrframe);
++
++exit:
++
++	return ret;
++#endif
++}
++
++int check_indicate_seq(struct recv_reorder_ctrl *preorder_ctrl, u16 seq_num);
++int check_indicate_seq(struct recv_reorder_ctrl *preorder_ctrl, u16 seq_num)
++{
++	u8	wsize = preorder_ctrl->wsize_b;
++	u16	wend = (preorder_ctrl->indicate_seq + wsize -1) & 0xFFF;//% 4096;
++
++	// Rx Reorder initialize condition.
++	if (preorder_ctrl->indicate_seq == 0xFFFF)
++	{
++		preorder_ctrl->indicate_seq = seq_num;
++		#ifdef DBG_RX_SEQ
++		DBG_871X("DBG_RX_SEQ %s:%d init IndicateSeq: %d, NewSeq: %d\n", __FUNCTION__, __LINE__,
++			preorder_ctrl->indicate_seq, seq_num);
++		#endif
++
++		//DbgPrint("check_indicate_seq, 1st->indicate_seq=%d\n", precvpriv->indicate_seq);
++	}
++
++	//DbgPrint("enter->check_indicate_seq(): IndicateSeq: %d, NewSeq: %d\n", precvpriv->indicate_seq, seq_num);
++
++	// Drop out the packet which SeqNum is smaller than WinStart
++	if( SN_LESS(seq_num, preorder_ctrl->indicate_seq) )
++	{
++		//RT_TRACE(COMP_RX_REORDER, DBG_LOUD, ("CheckRxTsIndicateSeq(): Packet Drop! IndicateSeq: %d, NewSeq: %d\n", pTS->RxIndicateSeq, NewSeqNum));
++		//DbgPrint("CheckRxTsIndicateSeq(): Packet Drop! IndicateSeq: %d, NewSeq: %d\n", precvpriv->indicate_seq, seq_num);
++
++		#ifdef DBG_RX_DROP_FRAME
++		DBG_871X("%s IndicateSeq: %d > NewSeq: %d\n", __FUNCTION__, 
++			preorder_ctrl->indicate_seq, seq_num);
++		#endif
++
++
++		return _FALSE;
++	}
++
++	//
++	// Sliding window manipulation. Conditions includes:
++	// 1. Incoming SeqNum is equal to WinStart =>Window shift 1
++	// 2. Incoming SeqNum is larger than the WinEnd => Window shift N
++	//
++	if( SN_EQUAL(seq_num, preorder_ctrl->indicate_seq) )
++	{
++		preorder_ctrl->indicate_seq = (preorder_ctrl->indicate_seq + 1) & 0xFFF;
++		#ifdef DBG_RX_SEQ
++		DBG_871X("DBG_RX_SEQ %s:%d SN_EQUAL IndicateSeq: %d, NewSeq: %d\n", __FUNCTION__, __LINE__,
++			preorder_ctrl->indicate_seq, seq_num);
++		#endif
++	}
++	else if(SN_LESS(wend, seq_num))
++	{
++		//RT_TRACE(COMP_RX_REORDER, DBG_LOUD, ("CheckRxTsIndicateSeq(): Window Shift! IndicateSeq: %d, NewSeq: %d\n", pTS->RxIndicateSeq, NewSeqNum));
++		//DbgPrint("CheckRxTsIndicateSeq(): Window Shift! IndicateSeq: %d, NewSeq: %d\n", precvpriv->indicate_seq, seq_num);
++
++		// boundary situation, when seq_num cross 0xFFF
++		if(seq_num >= (wsize - 1))
++			preorder_ctrl->indicate_seq = seq_num + 1 -wsize;
++		else
++			preorder_ctrl->indicate_seq = 0xFFF - (wsize - (seq_num + 1)) + 1;
++
++		#ifdef DBG_RX_SEQ
++		DBG_871X("DBG_RX_SEQ %s:%d SN_LESS(wend, seq_num) IndicateSeq: %d, NewSeq: %d\n", __FUNCTION__, __LINE__,
++			preorder_ctrl->indicate_seq, seq_num);
++		#endif
++	}
++
++	//DbgPrint("exit->check_indicate_seq(): IndicateSeq: %d, NewSeq: %d\n", precvpriv->indicate_seq, seq_num);
++
++	return _TRUE;
++}
++
++int enqueue_reorder_recvframe(struct recv_reorder_ctrl *preorder_ctrl, union recv_frame *prframe);
++int enqueue_reorder_recvframe(struct recv_reorder_ctrl *preorder_ctrl, union recv_frame *prframe)
++{
++	struct rx_pkt_attrib *pattrib = &prframe->u.hdr.attrib;
++	_queue *ppending_recvframe_queue = &preorder_ctrl->pending_recvframe_queue;
++	_list	*phead, *plist;
++	union recv_frame *pnextrframe;
++	struct rx_pkt_attrib *pnextattrib;
++
++	//DbgPrint("+enqueue_reorder_recvframe()\n");
++
++	//_enter_critical_ex(&ppending_recvframe_queue->lock, &irql);
++	//_rtw_spinlock_ex(&ppending_recvframe_queue->lock);
++
++
++	phead = get_list_head(ppending_recvframe_queue);
++	plist = get_next(phead);
++
++	while(rtw_end_of_queue_search(phead, plist) == _FALSE)
++	{
++		pnextrframe = LIST_CONTAINOR(plist, union recv_frame, u);
++		pnextattrib = &pnextrframe->u.hdr.attrib;
++
++		if(SN_LESS(pnextattrib->seq_num, pattrib->seq_num))
++		{
++			plist = get_next(plist);
++		}
++		else if( SN_EQUAL(pnextattrib->seq_num, pattrib->seq_num))
++		{
++			//Duplicate entry is found!! Do not insert current entry.
++			//RT_TRACE(COMP_RX_REORDER, DBG_TRACE, ("InsertRxReorderList(): Duplicate packet is dropped!! IndicateSeq: %d, NewSeq: %d\n", pTS->RxIndicateSeq, SeqNum));
++
++			//_exit_critical_ex(&ppending_recvframe_queue->lock, &irql);
++
++			return _FALSE;
++		}
++		else
++		{
++			break;
++		}
++
++		//DbgPrint("enqueue_reorder_recvframe():while\n");
++
++	}
++
++
++	//_enter_critical_ex(&ppending_recvframe_queue->lock, &irql);
++	//_rtw_spinlock_ex(&ppending_recvframe_queue->lock);
++
++	rtw_list_delete(&(prframe->u.hdr.list));
++
++	rtw_list_insert_tail(&(prframe->u.hdr.list), plist);
++
++	//_rtw_spinunlock_ex(&ppending_recvframe_queue->lock);
++	//_exit_critical_ex(&ppending_recvframe_queue->lock, &irql);
++
++
++	//RT_TRACE(COMP_RX_REORDER, DBG_TRACE, ("InsertRxReorderList(): Pkt insert into buffer!! IndicateSeq: %d, NewSeq: %d\n", pTS->RxIndicateSeq, SeqNum));
++	return _TRUE;
++
++}
++
++int recv_indicatepkts_in_order(_adapter *padapter, struct recv_reorder_ctrl *preorder_ctrl, int bforced);
++int recv_indicatepkts_in_order(_adapter *padapter, struct recv_reorder_ctrl *preorder_ctrl, int bforced)
++{
++	//_irqL irql;
++	//u8 bcancelled;
++	_list	*phead, *plist;
++	union recv_frame *prframe;
++	struct rx_pkt_attrib *pattrib;
++	//u8 index = 0;
++	int bPktInBuf = _FALSE;
++	struct recv_priv *precvpriv = &padapter->recvpriv;
++	_queue *ppending_recvframe_queue = &preorder_ctrl->pending_recvframe_queue;
++
++	//DbgPrint("+recv_indicatepkts_in_order\n");
++
++	//_enter_critical_ex(&ppending_recvframe_queue->lock, &irql);
++	//_rtw_spinlock_ex(&ppending_recvframe_queue->lock);
++
++	phead = 	get_list_head(ppending_recvframe_queue);
++	plist = get_next(phead);
++
++#if 0
++	// Check if there is any other indication thread running.
++	if(pTS->RxIndicateState == RXTS_INDICATE_PROCESSING)
++		return;
++#endif
++
++	// Handling some condition for forced indicate case.
++	if(bforced==_TRUE)
++	{
++		if(rtw_is_list_empty(phead))
++		{
++			// _exit_critical_ex(&ppending_recvframe_queue->lock, &irql);
++			//_rtw_spinunlock_ex(&ppending_recvframe_queue->lock);
++			return _TRUE;
++		}
++	
++		 prframe = LIST_CONTAINOR(plist, union recv_frame, u);
++	        pattrib = &prframe->u.hdr.attrib;	
++		preorder_ctrl->indicate_seq = pattrib->seq_num;		
++		#ifdef DBG_RX_SEQ
++		DBG_871X("DBG_RX_SEQ %s:%d IndicateSeq: %d, NewSeq: %d\n", __FUNCTION__, __LINE__,
++			preorder_ctrl->indicate_seq, pattrib->seq_num);
++		#endif
++	}
++
++	// Prepare indication list and indication.
++	// Check if there is any packet need indicate.
++	while(!rtw_is_list_empty(phead))
++	{
++	
++		prframe = LIST_CONTAINOR(plist, union recv_frame, u);
++		pattrib = &prframe->u.hdr.attrib;
++
++		if(!SN_LESS(preorder_ctrl->indicate_seq, pattrib->seq_num))
++		{
++			RT_TRACE(_module_rtl871x_recv_c_, _drv_notice_,
++				 ("recv_indicatepkts_in_order: indicate=%d seq=%d amsdu=%d\n",
++				  preorder_ctrl->indicate_seq, pattrib->seq_num, pattrib->amsdu));
++
++#if 0
++			// This protect buffer from overflow.
++			if(index >= REORDER_WIN_SIZE)
++			{
++				RT_ASSERT(FALSE, ("IndicateRxReorderList(): Buffer overflow!! \n"));
++				bPktInBuf = TRUE;
++				break;
++			}
++#endif
++
++			plist = get_next(plist);
++			rtw_list_delete(&(prframe->u.hdr.list));
++
++			if(SN_EQUAL(preorder_ctrl->indicate_seq, pattrib->seq_num))
++			{
++				preorder_ctrl->indicate_seq = (preorder_ctrl->indicate_seq + 1) & 0xFFF;
++				#ifdef DBG_RX_SEQ
++				DBG_871X("DBG_RX_SEQ %s:%d IndicateSeq: %d, NewSeq: %d\n", __FUNCTION__, __LINE__,
++					preorder_ctrl->indicate_seq, pattrib->seq_num);
++				#endif
++			}
++
++#if 0
++			index++;
++			if(index==1)
++			{
++				//Cancel previous pending timer.
++				//PlatformCancelTimer(Adapter, &pTS->RxPktPendingTimer);
++				if(bforced!=_TRUE)
++				{
++					//DBG_871X("_cancel_timer(&preorder_ctrl->reordering_ctrl_timer, &bcancelled);\n");
++					_cancel_timer(&preorder_ctrl->reordering_ctrl_timer, &bcancelled);
++				}
++			}
++#endif
++
++			//Set this as a lock to make sure that only one thread is indicating packet.
++			//pTS->RxIndicateState = RXTS_INDICATE_PROCESSING;
++
++			// Indicate packets
++			//RT_ASSERT((index<=REORDER_WIN_SIZE), ("RxReorderIndicatePacket(): Rx Reorder buffer full!! \n"));
++
++
++			//indicate this recv_frame
++			//DbgPrint("recv_indicatepkts_in_order, indicate_seq=%d, seq_num=%d\n", precvpriv->indicate_seq, pattrib->seq_num);
++			if(!pattrib->amsdu)
++			{
++				//DBG_871X("recv_indicatepkts_in_order, amsdu!=1, indicate_seq=%d, seq_num=%d\n", preorder_ctrl->indicate_seq, pattrib->seq_num);
++
++				if ((padapter->bDriverStopped == _FALSE) &&
++				    (padapter->bSurpriseRemoved == _FALSE))
++				{
++					
++					rtw_recv_indicatepkt(padapter, prframe);//indicate this recv_frame
++										
++				}
++			}
++			else if(pattrib->amsdu==1)
++			{
++				if(amsdu_to_msdu(padapter, prframe)!=_SUCCESS)
++				{
++					rtw_free_recvframe(prframe, &precvpriv->free_recv_queue);
++				}
++			}
++			else
++			{
++				//error condition;
++			}
++
++
++			//Update local variables.
++			bPktInBuf = _FALSE;
++
++		}
++		else
++		{
++			bPktInBuf = _TRUE;
++			break;
++		}
++
++		//DbgPrint("recv_indicatepkts_in_order():while\n");
++
++	}
++
++	//_rtw_spinunlock_ex(&ppending_recvframe_queue->lock);
++	//_exit_critical_ex(&ppending_recvframe_queue->lock, &irql);
++
++/*
++	//Release the indication lock and set to new indication step.
++	if(bPktInBuf)
++	{
++		// Set new pending timer.
++		//pTS->RxIndicateState = RXTS_INDICATE_REORDER;
++		//PlatformSetTimer(Adapter, &pTS->RxPktPendingTimer, pHTInfo->RxReorderPendingTime);
++		//DBG_871X("_set_timer(&preorder_ctrl->reordering_ctrl_timer, REORDER_WAIT_TIME)\n");
++		_set_timer(&preorder_ctrl->reordering_ctrl_timer, REORDER_WAIT_TIME);
++	}
++	else
++	{
++		//pTS->RxIndicateState = RXTS_INDICATE_IDLE;
++	}
++*/
++	//_exit_critical_ex(&ppending_recvframe_queue->lock, &irql);
++
++	//return _TRUE;
++	return bPktInBuf;
++
++}
++
++int recv_indicatepkt_reorder(_adapter *padapter, union recv_frame *prframe);
++int recv_indicatepkt_reorder(_adapter *padapter, union recv_frame *prframe)
++{
++	_irqL irql;
++	int retval = _SUCCESS;
++	struct rx_pkt_attrib *pattrib = &prframe->u.hdr.attrib;
++	struct recv_reorder_ctrl *preorder_ctrl = prframe->u.hdr.preorder_ctrl;
++	_queue *ppending_recvframe_queue = &preorder_ctrl->pending_recvframe_queue;
++
++	if(!pattrib->amsdu)
++	{
++		//s1.
++		wlanhdr_to_ethhdr(prframe);
++
++		//if ((pattrib->qos!=1) /*|| pattrib->priority!=0 || IS_MCAST(pattrib->ra)*/
++		//	|| (pattrib->eth_type==0x0806) || (pattrib->ack_policy!=0))
++		if (pattrib->qos!=1)
++		{
++			if ((padapter->bDriverStopped == _FALSE) &&
++			    (padapter->bSurpriseRemoved == _FALSE))
++			{
++				RT_TRACE(_module_rtl871x_recv_c_, _drv_alert_, ("@@@@  recv_indicatepkt_reorder -recv_func recv_indicatepkt\n" ));
++
++				rtw_recv_indicatepkt(padapter, prframe);
++				return _SUCCESS;
++
++			}
++			
++			#ifdef DBG_RX_DROP_FRAME
++			DBG_871X("DBG_RX_DROP_FRAME %s pattrib->qos !=1\n", __FUNCTION__);
++			#endif
++			
++			return _FAIL;
++		
++		}
++
++		if (preorder_ctrl->enable == _FALSE)
++		{
++			//indicate this recv_frame			
++			preorder_ctrl->indicate_seq = pattrib->seq_num;
++			#ifdef DBG_RX_SEQ
++			DBG_871X("DBG_RX_SEQ %s:%d IndicateSeq: %d, NewSeq: %d\n", __FUNCTION__, __LINE__,
++				preorder_ctrl->indicate_seq, pattrib->seq_num);
++			#endif
++			
++			rtw_recv_indicatepkt(padapter, prframe);		
++			
++			preorder_ctrl->indicate_seq = (preorder_ctrl->indicate_seq + 1)%4096;
++			#ifdef DBG_RX_SEQ
++			DBG_871X("DBG_RX_SEQ %s:%d IndicateSeq: %d, NewSeq: %d\n", __FUNCTION__, __LINE__,
++				preorder_ctrl->indicate_seq, pattrib->seq_num);
++			#endif
++			
++			return _SUCCESS;	
++		}			
++
++#ifndef CONFIG_RECV_REORDERING_CTRL
++		//indicate this recv_frame
++		rtw_recv_indicatepkt(padapter, prframe);
++		return _SUCCESS;
++#endif
++
++	}
++	else if(pattrib->amsdu==1) //temp filter -> means didn't support A-MSDUs in a A-MPDU
++	{
++		if (preorder_ctrl->enable == _FALSE)
++		{
++			preorder_ctrl->indicate_seq = pattrib->seq_num;
++			#ifdef DBG_RX_SEQ
++			DBG_871X("DBG_RX_SEQ %s:%d IndicateSeq: %d, NewSeq: %d\n", __FUNCTION__, __LINE__,
++				preorder_ctrl->indicate_seq, pattrib->seq_num);
++			#endif
++
++			retval = amsdu_to_msdu(padapter, prframe);
++
++			preorder_ctrl->indicate_seq = (preorder_ctrl->indicate_seq + 1)%4096;
++			#ifdef DBG_RX_SEQ
++			DBG_871X("DBG_RX_SEQ %s:%d IndicateSeq: %d, NewSeq: %d\n", __FUNCTION__, __LINE__,
++				preorder_ctrl->indicate_seq, pattrib->seq_num);
++			#endif
++
++			if(retval != _SUCCESS){
++				#ifdef DBG_RX_DROP_FRAME
++				DBG_871X("DBG_RX_DROP_FRAME %s amsdu_to_msdu fail\n", __FUNCTION__);
++				#endif
++			}
++
++			return retval;
++		}
++	}
++	else
++	{
++
++	}
++
++	_enter_critical_bh(&ppending_recvframe_queue->lock, &irql);
++
++	RT_TRACE(_module_rtl871x_recv_c_, _drv_notice_,
++		 ("recv_indicatepkt_reorder: indicate=%d seq=%d\n",
++		  preorder_ctrl->indicate_seq, pattrib->seq_num));
++
++	//s2. check if winstart_b(indicate_seq) needs to been updated
++	if(!check_indicate_seq(preorder_ctrl, pattrib->seq_num))
++	{
++		//pHTInfo->RxReorderDropCounter++;
++		//ReturnRFDList(Adapter, pRfd);
++		//RT_TRACE(COMP_RX_REORDER, DBG_TRACE, ("RxReorderIndicatePacket() ==> Packet Drop!!\n"));
++		//_exit_critical_ex(&ppending_recvframe_queue->lock, &irql);
++		//return _FAIL;
++
++		#ifdef DBG_RX_DROP_FRAME
++		DBG_871X("DBG_RX_DROP_FRAME %s check_indicate_seq fail\n", __FUNCTION__);
++		#endif
++#if 0		
++		rtw_recv_indicatepkt(padapter, prframe);
++
++		_exit_critical_bh(&ppending_recvframe_queue->lock, &irql);
++		
++		goto _success_exit;
++#else
++		goto _err_exit;
++#endif
++	}
++
++
++	//s3. Insert all packet into Reorder Queue to maintain its ordering.
++	if(!enqueue_reorder_recvframe(preorder_ctrl, prframe))
++	{
++		//DbgPrint("recv_indicatepkt_reorder, enqueue_reorder_recvframe fail!\n");
++		//_exit_critical_ex(&ppending_recvframe_queue->lock, &irql);
++		//return _FAIL;
++		#ifdef DBG_RX_DROP_FRAME
++		DBG_871X("DBG_RX_DROP_FRAME %s enqueue_reorder_recvframe fail\n", __FUNCTION__);
++		#endif
++		goto _err_exit;
++	}
++
++
++	//s4.
++	// Indication process.
++	// After Packet dropping and Sliding Window shifting as above, we can now just indicate the packets
++	// with the SeqNum smaller than latest WinStart and buffer other packets.
++	//
++	// For Rx Reorder condition:
++	// 1. All packets with SeqNum smaller than WinStart => Indicate
++	// 2. All packets with SeqNum larger than or equal to WinStart => Buffer it.
++	//
++
++	//recv_indicatepkts_in_order(padapter, preorder_ctrl, _TRUE);
++	if(recv_indicatepkts_in_order(padapter, preorder_ctrl, _FALSE)==_TRUE)
++	{
++		_set_timer(&preorder_ctrl->reordering_ctrl_timer, REORDER_WAIT_TIME);
++		_exit_critical_bh(&ppending_recvframe_queue->lock, &irql);
++	}
++	else
++	{
++		_exit_critical_bh(&ppending_recvframe_queue->lock, &irql);
++		_cancel_timer_ex(&preorder_ctrl->reordering_ctrl_timer);
++	}
++
++
++_success_exit:
++
++	return _SUCCESS;
++
++_err_exit:
++
++        _exit_critical_bh(&ppending_recvframe_queue->lock, &irql);
++
++	return _FAIL;
++}
++
++
++void rtw_reordering_ctrl_timeout_handler(void *pcontext)
++{
++	_irqL irql;
++	struct recv_reorder_ctrl *preorder_ctrl = (struct recv_reorder_ctrl *)pcontext;
++	_adapter *padapter = preorder_ctrl->padapter;
++	_queue *ppending_recvframe_queue = &preorder_ctrl->pending_recvframe_queue;
++
++
++	if(padapter->bDriverStopped ||padapter->bSurpriseRemoved)
++	{
++		return;
++	}
++
++	//DBG_871X("+rtw_reordering_ctrl_timeout_handler()=>\n");
++
++	_enter_critical_bh(&ppending_recvframe_queue->lock, &irql);
++
++	if(recv_indicatepkts_in_order(padapter, preorder_ctrl, _TRUE)==_TRUE)
++	{
++		_set_timer(&preorder_ctrl->reordering_ctrl_timer, REORDER_WAIT_TIME);		
++	}
++
++	_exit_critical_bh(&ppending_recvframe_queue->lock, &irql);
++
++}
++
++int process_recv_indicatepkts(_adapter *padapter, union recv_frame *prframe);
++int process_recv_indicatepkts(_adapter *padapter, union recv_frame *prframe)
++{
++	int retval = _SUCCESS;
++	//struct recv_priv *precvpriv = &padapter->recvpriv;
++	//struct rx_pkt_attrib *pattrib = &prframe->u.hdr.attrib;
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++#ifdef CONFIG_TDLS
++	struct sta_info *psta = prframe->u.hdr.psta;
++#endif //CONFIG_TDLS
++
++#ifdef CONFIG_80211N_HT
++
++	struct ht_priv	*phtpriv = &pmlmepriv->htpriv;
++
++#ifdef CONFIG_TDLS
++	if( (phtpriv->ht_option==_TRUE) ||
++		((psta->tdls_sta_state & TDLS_LINKED_STATE) && 
++		 (psta->htpriv.ht_option==_TRUE) &&
++		 (psta->htpriv.ampdu_enable==_TRUE))) //B/G/N Mode
++#else
++	if(phtpriv->ht_option==_TRUE)  //B/G/N Mode
++#endif //CONFIG_TDLS
++	{
++		//prframe->u.hdr.preorder_ctrl = &precvpriv->recvreorder_ctrl[pattrib->priority];
++
++		if(recv_indicatepkt_reorder(padapter, prframe)!=_SUCCESS)// including perform A-MPDU Rx Ordering Buffer Control
++		{
++			#ifdef DBG_RX_DROP_FRAME
++			DBG_871X("DBG_RX_DROP_FRAME %s recv_indicatepkt_reorder error!\n", __FUNCTION__);
++			#endif
++		
++			if ((padapter->bDriverStopped == _FALSE) &&
++			    (padapter->bSurpriseRemoved == _FALSE))
++			{
++				retval = _FAIL;
++				return retval;
++			}
++		}
++	}
++	else //B/G mode
++#endif
++	{
++		retval=wlanhdr_to_ethhdr (prframe);
++		if(retval != _SUCCESS)
++		{
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("wlanhdr_to_ethhdr: drop pkt \n"));
++			#ifdef DBG_RX_DROP_FRAME
++			DBG_871X("DBG_RX_DROP_FRAME %s wlanhdr_to_ethhdr error!\n", __FUNCTION__);
++			#endif
++			return retval;
++		}
++
++		if ((padapter->bDriverStopped ==_FALSE)&&( padapter->bSurpriseRemoved==_FALSE))
++		{
++			//indicate this recv_frame
++			RT_TRACE(_module_rtl871x_recv_c_, _drv_notice_, ("@@@@ process_recv_indicatepkts- recv_func recv_indicatepkt\n" ));
++			rtw_recv_indicatepkt(padapter, prframe);
++
++
++		}
++		else
++		{
++			RT_TRACE(_module_rtl871x_recv_c_, _drv_notice_, ("@@@@ process_recv_indicatepkts- recv_func free_indicatepkt\n" ));
++
++			RT_TRACE(_module_rtl871x_recv_c_, _drv_notice_, ("recv_func:bDriverStopped(%d) OR bSurpriseRemoved(%d)", padapter->bDriverStopped, padapter->bSurpriseRemoved));
++			retval = _FAIL;
++			return retval;
++		}
++
++	}
++
++	return retval;
++
++}
++
++int recv_func_prehandle(_adapter *padapter, union recv_frame *rframe)
++{
++	int ret = _SUCCESS;
++	struct rx_pkt_attrib *pattrib = &rframe->u.hdr.attrib;
++	struct recv_priv *precvpriv = &padapter->recvpriv;
++	_queue *pfree_recv_queue = &padapter->recvpriv.free_recv_queue;
++	
++#ifdef CONFIG_MP_INCLUDED
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++#endif //CONFIG_MP_INCLUDED
++
++#ifdef CONFIG_MP_INCLUDED
++	if ((check_fwstate(pmlmepriv, WIFI_MP_STATE) == _TRUE))//&&(padapter->mppriv.check_mp_pkt == 0))
++	{
++		if (pattrib->crc_err == 1)
++			padapter->mppriv.rx_crcerrpktcount++;
++		else
++			padapter->mppriv.rx_pktcount++;
++
++		if (check_fwstate(pmlmepriv, WIFI_MP_LPBK_STATE) == _FALSE) {
++			RT_TRACE(_module_rtl871x_recv_c_, _drv_alert_, ("MP - Not in loopback mode , drop pkt \n"));
++			ret = _FAIL;
++			rtw_free_recvframe(rframe, pfree_recv_queue);//free this recv_frame
++			goto exit;
++		}
++	}
++#endif
++
++	//check the frame crtl field and decache
++	ret = validate_recv_frame(padapter, rframe);
++	if (ret != _SUCCESS)
++	{
++		RT_TRACE(_module_rtl871x_recv_c_, _drv_info_, ("recv_func: validate_recv_frame fail! drop pkt\n"));
++		rtw_free_recvframe(rframe, pfree_recv_queue);//free this recv_frame
++		goto exit;
++	}
++
++exit:
++	return ret;
++}
++
++int recv_func_posthandle(_adapter *padapter, union recv_frame *prframe)
++{
++	int ret = _SUCCESS;
++	union recv_frame *orig_prframe = prframe;
++	struct rx_pkt_attrib *pattrib = &prframe->u.hdr.attrib;
++	struct recv_priv *precvpriv = &padapter->recvpriv;
++	_queue *pfree_recv_queue = &padapter->recvpriv.free_recv_queue;
++	
++#ifdef CONFIG_MP_INCLUDED
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++#endif //CONFIG_MP_INCLUDED
++
++#ifdef CONFIG_TDLS
++	u8 *psnap_type, *pcategory;
++	struct sta_info *ptdls_sta = NULL;
++#endif //CONFIG_TDLS
++
++
++	// DATA FRAME
++	rtw_led_control(padapter, LED_CTL_RX);
++
++	prframe = decryptor(padapter, prframe);
++	if (prframe == NULL) {
++		RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("decryptor: drop pkt\n"));
++		#ifdef DBG_RX_DROP_FRAME
++		DBG_871X("DBG_RX_DROP_FRAME %s decryptor: drop pkt\n", __FUNCTION__);
++		#endif
++		ret = _FAIL;
++		goto _recv_data_drop;
++	}
++
++#if 0
++	if ( padapter->adapter_type == PRIMARY_ADAPTER )
++	{
++		DBG_871X("+++\n");
++		{
++			int i;
++			u8	*ptr = get_recvframe_data(prframe);
++			for(i=0; i<140;i=i+8)
++				DBG_871X("%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:", *(ptr+i),
++				*(ptr+i+1), *(ptr+i+2) ,*(ptr+i+3) ,*(ptr+i+4),*(ptr+i+5), *(ptr+i+6), *(ptr+i+7));
++
++		}
++		DBG_871X("---\n");
++	}
++#endif //RTK_DMP_PLATFORM
++
++#ifdef CONFIG_TDLS
++	//check TDLS frame
++	psnap_type = get_recvframe_data(orig_prframe);
++	psnap_type+=pattrib->hdrlen + pattrib->iv_len+SNAP_SIZE;
++	pcategory = psnap_type + ETH_TYPE_LEN + PAYLOAD_TYPE_LEN;
++
++	if((_rtw_memcmp(psnap_type, SNAP_ETH_TYPE_TDLS, ETH_TYPE_LEN)) &&
++		((*pcategory==RTW_WLAN_CATEGORY_TDLS) || (*pcategory==RTW_WLAN_CATEGORY_P2P))){
++		ret = OnTDLS(padapter, prframe);	//all of functions will return _FAIL
++		goto _exit_recv_func;
++	}
++#endif //CONFIG_TDLS
++
++	prframe = recvframe_chk_defrag(padapter, prframe);
++	if(prframe==NULL)	{
++		RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("recvframe_chk_defrag: drop pkt\n"));
++		#ifdef DBG_RX_DROP_FRAME
++		DBG_871X("DBG_RX_DROP_FRAME %s recvframe_chk_defrag: drop pkt\n", __FUNCTION__);
++		#endif
++		goto _recv_data_drop;		
++	}
++
++	prframe=portctrl(padapter, prframe);
++	if (prframe == NULL) {
++		RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("portctrl: drop pkt \n"));
++		#ifdef DBG_RX_DROP_FRAME
++		DBG_871X("DBG_RX_DROP_FRAME %s portctrl: drop pkt\n", __FUNCTION__);
++		#endif
++		ret = _FAIL;
++		goto _recv_data_drop;
++	}
++
++#ifdef CONFIG_TDLS
++	if(padapter->tdlsinfo.setup_state == TDLS_LINKED_STATE)
++		ptdls_sta = rtw_get_stainfo(&padapter->stapriv, pattrib->src);
++	count_rx_stats(padapter, prframe, ptdls_sta);
++#else
++	count_rx_stats(padapter, prframe, NULL);
++#endif //CONFIG_TDLS
++
++#ifdef CONFIG_80211N_HT
++
++	ret = process_recv_indicatepkts(padapter, prframe);
++	if (ret != _SUCCESS)
++	{
++		RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("recv_func: process_recv_indicatepkts fail! \n"));
++		#ifdef DBG_RX_DROP_FRAME
++		DBG_871X("DBG_RX_DROP_FRAME %s recv_func: process_recv_indicatepkts fail!\n", __FUNCTION__);
++		#endif
++		rtw_free_recvframe(orig_prframe, pfree_recv_queue);//free this recv_frame
++		goto _recv_data_drop;
++	}
++
++#else // CONFIG_80211N_HT
++
++	if (!pattrib->amsdu)
++	{
++		ret = wlanhdr_to_ethhdr (prframe);
++		if (ret != _SUCCESS)
++		{
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("wlanhdr_to_ethhdr: drop pkt \n"));
++			#ifdef DBG_RX_DROP_FRAME
++			DBG_871X("DBG_RX_DROP_FRAME %s wlanhdr_to_ethhdr: drop pkt\n", __FUNCTION__);
++			#endif
++			rtw_free_recvframe(orig_prframe, pfree_recv_queue);//free this recv_frame
++			goto _recv_data_drop;
++		}
++
++		if ((padapter->bDriverStopped == _FALSE) && (padapter->bSurpriseRemoved == _FALSE))
++		{
++			RT_TRACE(_module_rtl871x_recv_c_, _drv_alert_, ("@@@@ recv_func: recv_func rtw_recv_indicatepkt\n" ));
++			//indicate this recv_frame
++			ret = rtw_recv_indicatepkt(padapter, prframe);
++			if (ret != _SUCCESS)
++			{	
++				#ifdef DBG_RX_DROP_FRAME
++				DBG_871X("DBG_RX_DROP_FRAME %s rtw_recv_indicatepkt fail!\n", __FUNCTION__);
++				#endif
++				goto _recv_data_drop;
++			}
++		}
++		else
++		{
++			RT_TRACE(_module_rtl871x_recv_c_, _drv_alert_, ("@@@@  recv_func: rtw_free_recvframe\n" ));
++			RT_TRACE(_module_rtl871x_recv_c_, _drv_debug_, ("recv_func:bDriverStopped(%d) OR bSurpriseRemoved(%d)", padapter->bDriverStopped, padapter->bSurpriseRemoved));
++			#ifdef DBG_RX_DROP_FRAME
++			DBG_871X("DBG_RX_DROP_FRAME %s ecv_func:bDriverStopped(%d) OR bSurpriseRemoved(%d)\n", __FUNCTION__,
++				padapter->bDriverStopped, padapter->bSurpriseRemoved);
++			#endif
++			ret = _FAIL;
++			rtw_free_recvframe(orig_prframe, pfree_recv_queue); //free this recv_frame
++		}
++
++	}
++	else if(pattrib->amsdu==1)
++	{
++
++		ret = amsdu_to_msdu(padapter, prframe);
++		if(ret != _SUCCESS)
++		{
++			#ifdef DBG_RX_DROP_FRAME
++			DBG_871X("DBG_RX_DROP_FRAME %s amsdu_to_msdu fail\n", __FUNCTION__);
++			#endif
++			rtw_free_recvframe(orig_prframe, pfree_recv_queue);
++			goto _recv_data_drop;
++		}
++	}
++	else
++	{
++		#ifdef DBG_RX_DROP_FRAME
++		DBG_871X("DBG_RX_DROP_FRAME %s what is this condition??\n", __FUNCTION__);
++		#endif
++		goto _recv_data_drop;
++	}
++#endif // CONFIG_80211N_HT
++
++_exit_recv_func:
++	return ret;
++
++_recv_data_drop:
++	precvpriv->rx_drop++;
++	return ret;
++}
++
++
++int recv_func(_adapter *padapter, union recv_frame *rframe);
++int recv_func(_adapter *padapter, union recv_frame *rframe)
++{
++	int ret;
++	struct rx_pkt_attrib *prxattrib = &rframe->u.hdr.attrib;
++	struct recv_priv *recvpriv = &padapter->recvpriv;
++	struct security_priv *psecuritypriv=&padapter->securitypriv;
++	struct mlme_priv *mlmepriv = &padapter->mlmepriv;
++
++	/* check if need to handle uc_swdec_pending_queue*/
++	if (check_fwstate(mlmepriv, WIFI_STATION_STATE) && psecuritypriv->busetkipkey)
++	{
++		union recv_frame *pending_frame;
++		_irqL irqL;
++
++		while((pending_frame=rtw_alloc_recvframe(&padapter->recvpriv.uc_swdec_pending_queue))) {
++			if (recv_func_posthandle(padapter, pending_frame) == _SUCCESS)
++				DBG_871X("%s: dequeue uc_swdec_pending_queue\n", __func__);
++		}
++	}
++
++	ret = recv_func_prehandle(padapter, rframe);
++
++	if(ret == _SUCCESS) {
++		
++		/* check if need to enqueue into uc_swdec_pending_queue*/
++		if (check_fwstate(mlmepriv, WIFI_STATION_STATE) &&
++			!IS_MCAST(prxattrib->ra) && prxattrib->encrypt>0 &&
++			(prxattrib->bdecrypted == 0 ||psecuritypriv->sw_decrypt == _TRUE) &&
++			!is_wep_enc(psecuritypriv->dot11PrivacyAlgrthm) &&
++			!psecuritypriv->busetkipkey) {
++			rtw_enqueue_recvframe(rframe, &padapter->recvpriv.uc_swdec_pending_queue);
++			DBG_871X("%s: no key, enqueue uc_swdec_pending_queue\n", __func__);
++			goto exit;
++		}
++		
++		ret = recv_func_posthandle(padapter, rframe);
++	}
++
++exit:
++	return ret;
++}
++
++
++s32 rtw_recv_entry(union recv_frame *precvframe)
++{
++	_adapter *padapter;
++	struct recv_priv *precvpriv;
++	s32 ret=_SUCCESS;
++
++_func_enter_;
++
++//	RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("+rtw_recv_entry\n"));
++
++	padapter = precvframe->u.hdr.adapter;
++
++	precvpriv = &padapter->recvpriv;
++
++
++	if ((ret = recv_func(padapter, precvframe)) == _FAIL)
++	{
++		RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("rtw_recv_entry: recv_func return fail!!!\n"));
++		goto _recv_entry_drop;
++	}
++
++
++	precvpriv->rx_pkts++;
++
++_func_exit_;
++
++	return ret;
++
++_recv_entry_drop:
++
++#ifdef CONFIG_MP_INCLUDED
++	padapter->mppriv.rx_pktloss = precvpriv->rx_drop;
++#endif
++
++	//RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("_recv_entry_drop\n"));
++
++_func_exit_;
++
++	return ret;
++}
++
++#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS
++void rtw_signal_stat_timer_hdl(RTW_TIMER_HDL_ARGS){
++	_adapter *adapter = (_adapter *)FunctionContext;
++	struct recv_priv *recvpriv = &adapter->recvpriv;
++	
++	u32 tmp_s, tmp_q;
++	u8 avg_signal_strength = 0;
++	u8 avg_signal_qual = 0;
++	u32 num_signal_strength = 0;
++	u32 num_signal_qual = 0;
++	u8 _alpha = 3; // this value is based on converging_constant = 5000 and sampling_interval = 1000
++
++	if(adapter->recvpriv.is_signal_dbg) {
++		//update the user specific value, signal_strength_dbg, to signal_strength, rssi
++		adapter->recvpriv.signal_strength= adapter->recvpriv.signal_strength_dbg;
++		adapter->recvpriv.rssi=(s8)translate_percentage_to_dbm((u8)adapter->recvpriv.signal_strength_dbg);
++	} else {
++
++		if(recvpriv->signal_strength_data.update_req == 0) {// update_req is clear, means we got rx
++			avg_signal_strength = recvpriv->signal_strength_data.avg_val;
++			num_signal_strength = recvpriv->signal_strength_data.total_num;
++			// after avg_vals are accquired, we can re-stat the signal values
++			recvpriv->signal_strength_data.update_req = 1;
++		}
++		
++		if(recvpriv->signal_qual_data.update_req == 0) {// update_req is clear, means we got rx
++			avg_signal_qual = recvpriv->signal_qual_data.avg_val;
++			num_signal_qual = recvpriv->signal_qual_data.total_num;
++			// after avg_vals are accquired, we can re-stat the signal values
++			recvpriv->signal_qual_data.update_req = 1;
++		}
++
++		if (num_signal_strength == 0) {
++			if (rtw_get_on_cur_ch_time(adapter) == 0
++				|| rtw_get_passing_time_ms(rtw_get_on_cur_ch_time(adapter)) < 2 * adapter->mlmeextpriv.mlmext_info.bcn_interval
++			) {
++				goto set_timer;
++			}
++		}
++
++		if(check_fwstate(&adapter->mlmepriv, _FW_UNDER_SURVEY) == _TRUE
++			|| check_fwstate(&adapter->mlmepriv, _FW_LINKED) == _FALSE
++		) { 
++			goto set_timer;
++		}
++
++		#ifdef CONFIG_CONCURRENT_MODE
++		if (check_buddy_fwstate(adapter, _FW_UNDER_SURVEY) == _TRUE)
++			goto set_timer;
++		#endif
++
++		//update value of signal_strength, rssi, signal_qual
++		tmp_s = (avg_signal_strength+(_alpha-1)*recvpriv->signal_strength);
++		if(tmp_s %_alpha)
++			tmp_s = tmp_s/_alpha + 1;
++		else
++			tmp_s = tmp_s/_alpha;
++		if(tmp_s>100)
++			tmp_s = 100;
++
++		tmp_q = (avg_signal_qual+(_alpha-1)*recvpriv->signal_qual);
++		if(tmp_q %_alpha)
++			tmp_q = tmp_q/_alpha + 1;
++		else
++			tmp_q = tmp_q/_alpha;
++		if(tmp_q>100)
++			tmp_q = 100;
++
++		recvpriv->signal_strength = tmp_s;
++		recvpriv->rssi = (s8)translate_percentage_to_dbm(tmp_s);
++		recvpriv->signal_qual = tmp_q;
++
++		#if defined(DBG_RX_SIGNAL_DISPLAY_PROCESSING) && 1
++		DBG_871X(FUNC_ADPT_FMT" signal_strength:%3u, rssi:%3d, signal_qual:%3u"
++			", num_signal_strength:%u, num_signal_qual:%u"
++			", on_cur_ch_ms:%d"
++			"\n"
++			, FUNC_ADPT_ARG(adapter)
++			, recvpriv->signal_strength
++			, recvpriv->rssi
++			, recvpriv->signal_qual
++			, num_signal_strength, num_signal_qual
++			, rtw_get_on_cur_ch_time(adapter) ? rtw_get_passing_time_ms(rtw_get_on_cur_ch_time(adapter)) : 0
++		);
++		#endif
++	}
++
++set_timer:
++	rtw_set_signal_stat_timer(recvpriv);
++	
++}
++#endif //CONFIG_NEW_SIGNAL_STAT_PROCESS
++
++
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_rf.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_rf.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_rf.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_rf.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,95 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _RTW_RF_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <recv_osdep.h>
++#include <xmit_osdep.h>
++
++
++struct ch_freq {
++	u32 channel;
++	u32 frequency;
++};
++
++struct ch_freq ch_freq_map[] = {
++	{1, 2412},{2, 2417},{3, 2422},{4, 2427},{5, 2432},
++	{6, 2437},{7, 2442},{8, 2447},{9, 2452},{10, 2457},
++	{11, 2462},{12, 2467},{13, 2472},{14, 2484},
++	/*  UNII */
++	{36, 5180},{40, 5200},{44, 5220},{48, 5240},{52, 5260},
++	{56, 5280},{60, 5300},{64, 5320},{149, 5745},{153, 5765},
++	{157, 5785},{161, 5805},{165, 5825},{167, 5835},{169, 5845},
++	{171, 5855},{173, 5865},
++	/* HiperLAN2 */
++	{100, 5500},{104, 5520},{108, 5540},{112, 5560},{116, 5580},
++	{120, 5600},{124, 5620},{128, 5640},{132, 5660},{136, 5680},
++	{140, 5700},
++	/* Japan MMAC */
++	{34, 5170},{38, 5190},{42, 5210},{46, 5230},
++	/*  Japan */
++	{184, 4920},{188, 4940},{192, 4960},{196, 4980},
++	{208, 5040},/* Japan, means J08 */
++	{212, 5060},/* Japan, means J12 */
++	{216, 5080},/* Japan, means J16 */
++};
++
++int ch_freq_map_num = (sizeof(ch_freq_map) / sizeof(struct ch_freq));
++
++u32 rtw_ch2freq(u32 channel)
++{
++	u8	i;
++	u32	freq = 0;
++
++	for (i = 0; i < ch_freq_map_num; i++)
++	{
++		if (channel == ch_freq_map[i].channel)
++		{
++			freq = ch_freq_map[i].frequency;
++				break;
++		}
++	}
++	if (i == ch_freq_map_num)
++		freq = 2412;
++
++	return freq;
++}
++
++u32 rtw_freq2ch(u32 freq)
++{
++	u8	i;
++	u32	ch = 0;
++
++	for (i = 0; i < ch_freq_map_num; i++)
++	{
++		if (freq == ch_freq_map[i].frequency)
++		{
++			ch = ch_freq_map[i].channel;
++				break;
++		}
++	}
++	if (i == ch_freq_map_num)
++		ch = 1;
++
++	return ch;
++}
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_security.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_security.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_security.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_security.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,3115 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define  _RTW_SECURITY_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <wifi.h>
++#include <osdep_intf.h>
++
++
++//=====WEP related===== 
++
++#define CRC32_POLY 0x04c11db7
++
++struct arc4context
++{
++	u32 x;
++	u32 y;
++	u8 state[256];
++};
++
++
++static void arcfour_init(struct arc4context 	*parc4ctx, u8 * key,u32	key_len)
++{
++	u32	t, u;
++	u32	keyindex;
++	u32	stateindex;
++	u8 * state;
++	u32	counter;
++_func_enter_;
++	state = parc4ctx->state;
++	parc4ctx->x = 0;
++	parc4ctx->y = 0;
++	for (counter = 0; counter < 256; counter++)
++		state[counter] = (u8)counter;
++	keyindex = 0;
++	stateindex = 0;
++	for (counter = 0; counter < 256; counter++)
++	{
++		t = state[counter];
++		stateindex = (stateindex + key[keyindex] + t) & 0xff;
++		u = state[stateindex];
++		state[stateindex] = (u8)t;
++		state[counter] = (u8)u;
++		if (++keyindex >= key_len)
++			keyindex = 0;
++	}
++_func_exit_;	
++}
++static u32 arcfour_byte(	struct arc4context	*parc4ctx)
++{
++	u32 x;
++	u32 y;
++	u32 sx, sy;
++	u8 * state;
++_func_enter_;
++	state = parc4ctx->state;
++	x = (parc4ctx->x + 1) & 0xff;
++	sx = state[x];
++	y = (sx + parc4ctx->y) & 0xff;
++	sy = state[y];
++	parc4ctx->x = x;
++	parc4ctx->y = y;
++	state[y] = (u8)sx;
++	state[x] = (u8)sy;
++_func_exit_;	
++	return state[(sx + sy) & 0xff];
++}
++              
++           
++static void arcfour_encrypt(	struct arc4context	*parc4ctx, 
++	u8 * dest,
++	u8 * src, 
++	u32 len)
++{
++	u32	i;
++_func_enter_;	
++	for (i = 0; i < len; i++)
++		dest[i] = src[i] ^ (unsigned char)arcfour_byte(parc4ctx);
++_func_exit_;		
++}
++
++static sint bcrc32initialized = 0;
++static u32 crc32_table[256];
++
++
++static u8 crc32_reverseBit( u8 data)
++{
++	return( (u8)((data<<7)&0x80) | ((data<<5)&0x40) | ((data<<3)&0x20) | ((data<<1)&0x10) | ((data>>1)&0x08) | ((data>>3)&0x04) | ((data>>5)&0x02) | ((data>>7)&0x01) );
++}
++
++static void crc32_init(void)
++{
++_func_enter_;	
++	if (bcrc32initialized == 1) 
++		goto exit;
++	else{
++		sint i, j;
++		u32 c;
++		u8 *p=(u8 *)&c, *p1;
++		u8 k;
++
++		c = 0x12340000;
++
++		for (i = 0; i < 256; ++i) 
++		{
++			k = crc32_reverseBit((u8)i);
++			for (c = ((u32)k) << 24, j = 8; j > 0; --j){
++				c = c & 0x80000000 ? (c << 1) ^ CRC32_POLY : (c << 1);
++			}
++			p1 = (u8 *)&crc32_table[i];
++
++			p1[0] = crc32_reverseBit(p[3]);
++			p1[1] = crc32_reverseBit(p[2]);
++			p1[2] = crc32_reverseBit(p[1]);
++			p1[3] = crc32_reverseBit(p[0]);
++		}
++		bcrc32initialized= 1;
++	}
++exit:	
++_func_exit_;			
++}
++
++static u32 getcrc32(u8 *buf, sint len)
++{
++	u8 *p;
++	u32  crc;
++_func_enter_;	
++	if (bcrc32initialized == 0) crc32_init();
++
++	crc = 0xffffffff;       /* preload shift register, per CRC-32 spec */
++
++	for (p = buf; len > 0; ++p, --len) 
++	{
++		crc = crc32_table[ (crc ^ *p) & 0xff] ^ (crc >> 8);
++	}
++_func_exit_;				
++	return ~crc;    /* transmit complement, per CRC-32 spec */
++}
++
++
++/*
++	Need to consider the fragment  situation
++*/
++void rtw_wep_encrypt(_adapter *padapter, u8 *pxmitframe)
++{																	// exclude ICV
++	
++	unsigned char	crc[4];
++	struct arc4context	 mycontext;
++
++	sint	curfragnum,length;
++	u32	keylength;
++
++	u8	*pframe, *payload,*iv;    //,*wepkey
++	u8	wepkey[16];
++	struct	pkt_attrib	 *pattrib = &((struct xmit_frame*)pxmitframe)->attrib;
++	struct 	security_priv	*psecuritypriv=&padapter->securitypriv;
++	struct	xmit_priv		*pxmitpriv=&padapter->xmitpriv;
++	
++_func_enter_;	
++
++	
++	if(((struct xmit_frame*)pxmitframe)->buf_addr==NULL)
++		return;
++
++#ifdef CONFIG_USB_TX_AGGREGATION
++	pframe = ((struct xmit_frame*)pxmitframe)->buf_addr + TXDESC_SIZE +
++		 (((struct xmit_frame*)pxmitframe)->pkt_offset * PACKET_OFFSET_SZ);
++#else
++	pframe = ((struct xmit_frame*)pxmitframe)->buf_addr + TXDESC_OFFSET;
++#endif
++	
++	//start to encrypt each fragment
++	if((pattrib->encrypt==_WEP40_)||(pattrib->encrypt==_WEP104_))
++	{
++		keylength=psecuritypriv->dot11DefKeylen[psecuritypriv->dot11PrivacyKeyIndex];
++
++		for(curfragnum=0;curfragnum<pattrib->nr_frags;curfragnum++)
++		{
++			iv=pframe+pattrib->hdrlen;
++			_rtw_memcpy(&wepkey[0], iv, 3);
++			_rtw_memcpy(&wepkey[3], &psecuritypriv->dot11DefKey[psecuritypriv->dot11PrivacyKeyIndex].skey[0],keylength);
++			payload=pframe+pattrib->iv_len+pattrib->hdrlen;
++
++			if((curfragnum+1)==pattrib->nr_frags)
++			{	//the last fragment
++			
++				length=pattrib->last_txcmdsz-pattrib->hdrlen-pattrib->iv_len- pattrib->icv_len;
++			
++				*((u32 *)crc)=cpu_to_le32(getcrc32(payload,length));
++
++				arcfour_init(&mycontext, wepkey,3+keylength);
++				arcfour_encrypt(&mycontext, payload, payload, length);
++				arcfour_encrypt(&mycontext, payload+length, crc, 4);
++
++			}
++			else
++			{
++			length=pxmitpriv->frag_len-pattrib->hdrlen-pattrib->iv_len-pattrib->icv_len ;
++				*((u32 *)crc)=cpu_to_le32(getcrc32(payload,length));
++				arcfour_init(&mycontext, wepkey,3+keylength);
++				arcfour_encrypt(&mycontext, payload, payload, length);
++				arcfour_encrypt(&mycontext, payload+length, crc, 4);
++	
++			pframe+=pxmitpriv->frag_len;
++			pframe=(u8 *)RND4((SIZE_PTR)(pframe));
++
++			}
++			
++		}		
++						
++	}
++	
++_func_exit_;						
++
++}
++
++void rtw_wep_decrypt(_adapter  *padapter, u8 *precvframe)
++{								
++	// exclude ICV
++	u8	crc[4];
++	struct arc4context	 mycontext;
++	sint 	length;
++	u32	keylength;
++	u8	*pframe, *payload,*iv,wepkey[16];
++	u8	 keyindex;
++	struct	rx_pkt_attrib	 *prxattrib = &(((union recv_frame*)precvframe)->u.hdr.attrib);
++	struct 	security_priv	*psecuritypriv=&padapter->securitypriv;
++
++_func_enter_;	
++
++	pframe=(unsigned char *)((union recv_frame*)precvframe)->u.hdr.rx_data;
++	
++	//start to decrypt recvframe
++	if((prxattrib->encrypt==_WEP40_)||(prxattrib->encrypt==_WEP104_))
++	{
++		iv=pframe+prxattrib->hdrlen;
++		//keyindex=(iv[3]&0x3);
++		keyindex = prxattrib->key_index;
++		keylength=psecuritypriv->dot11DefKeylen[keyindex];
++		_rtw_memcpy(&wepkey[0], iv, 3);
++		//_rtw_memcpy(&wepkey[3], &psecuritypriv->dot11DefKey[psecuritypriv->dot11PrivacyKeyIndex].skey[0],keylength);
++		_rtw_memcpy(&wepkey[3], &psecuritypriv->dot11DefKey[keyindex].skey[0],keylength);
++		length= ((union recv_frame *)precvframe)->u.hdr.len-prxattrib->hdrlen-prxattrib->iv_len;
++
++		payload=pframe+prxattrib->iv_len+prxattrib->hdrlen;
++		
++		//decrypt payload include icv
++		arcfour_init(&mycontext, wepkey,3+keylength);
++		arcfour_encrypt(&mycontext, payload, payload,  length);
++				
++		//calculate icv and compare the icv
++		*((u32 *)crc)=le32_to_cpu(getcrc32(payload,length-4));
++		
++		if(crc[3]!=payload[length-1] || crc[2]!=payload[length-2] || crc[1]!=payload[length-3] || crc[0]!=payload[length-4])
++		{
++			RT_TRACE(_module_rtl871x_security_c_,_drv_err_,("rtw_wep_decrypt:icv error crc[3](%x)!=payload[length-1](%x) || crc[2](%x)!=payload[length-2](%x) || crc[1](%x)!=payload[length-3](%x) || crc[0](%x)!=payload[length-4](%x)\n",
++						crc[3],payload[length-1],crc[2],payload[length-2],crc[1],payload[length-3],crc[0],payload[length-4]));
++		}	
++						
++	}
++	
++_func_exit_;		
++
++	return;
++	
++}
++
++//3 		=====TKIP related=====
++
++static u32 secmicgetuint32( u8 * p )
++// Convert from Byte[] to Us4Byte32 in a portable way
++{
++	s32 i;
++	u32 res = 0;
++_func_enter_;		
++	for( i=0; i<4; i++ )
++	{
++		res |= ((u32)(*p++)) << (8*i);
++	}
++_func_exit_;		
++	return res;
++}
++
++static void secmicputuint32( u8 * p, u32 val )
++// Convert from Us4Byte32 to Byte[] in a portable way
++{
++	long i;
++_func_enter_;			
++	for( i=0; i<4; i++ )
++	{
++		*p++ = (u8) (val & 0xff);
++		val >>= 8;
++	}
++_func_exit_;		
++}
++
++static void secmicclear(struct mic_data *pmicdata)
++{
++// Reset the state to the empty message.
++_func_enter_;	
++	pmicdata->L = pmicdata->K0;
++	pmicdata->R = pmicdata->K1;
++	pmicdata->nBytesInM = 0;
++	pmicdata->M = 0;
++_func_exit_;	
++}
++
++void rtw_secmicsetkey(struct mic_data *pmicdata, u8 * key )
++{
++	// Set the key
++_func_enter_;		
++	pmicdata->K0 = secmicgetuint32( key );
++	pmicdata->K1 = secmicgetuint32( key + 4 );
++	// and reset the message
++	secmicclear(pmicdata);
++_func_exit_;		
++}
++
++void rtw_secmicappendbyte(struct mic_data *pmicdata, u8 b )
++{
++_func_enter_;	
++	// Append the byte to our word-sized buffer
++	pmicdata->M |= ((unsigned long)b) << (8*pmicdata->nBytesInM);
++	pmicdata->nBytesInM++;
++	// Process the word if it is full.
++	if( pmicdata->nBytesInM >= 4 )
++	{
++		pmicdata->L ^= pmicdata->M;
++		pmicdata->R ^= ROL32( pmicdata->L, 17 );
++		pmicdata->L += pmicdata->R;
++		pmicdata->R ^= ((pmicdata->L & 0xff00ff00) >> 8) | ((pmicdata->L & 0x00ff00ff) << 8);
++		pmicdata->L += pmicdata->R;
++		pmicdata->R ^= ROL32( pmicdata->L, 3 );
++		pmicdata->L += pmicdata->R;
++		pmicdata->R ^= ROR32( pmicdata->L, 2 );
++		pmicdata->L += pmicdata->R;
++		// Clear the buffer
++		pmicdata->M = 0;
++		pmicdata->nBytesInM = 0;
++	}
++_func_exit_;			
++}
++
++void rtw_secmicappend(struct mic_data *pmicdata, u8 * src, u32 nbytes )
++{
++_func_enter_;	
++	// This is simple
++	while( nbytes > 0 )
++	{
++		rtw_secmicappendbyte(pmicdata, *src++ );
++		nbytes--;
++	}
++_func_exit_;			
++}
++
++void rtw_secgetmic(struct mic_data *pmicdata, u8 * dst )
++{
++_func_enter_;	
++	// Append the minimum padding
++	rtw_secmicappendbyte(pmicdata, 0x5a );
++	rtw_secmicappendbyte(pmicdata, 0 );
++	rtw_secmicappendbyte(pmicdata, 0 );
++	rtw_secmicappendbyte(pmicdata, 0 );
++	rtw_secmicappendbyte(pmicdata, 0 );
++	// and then zeroes until the length is a multiple of 4
++	while( pmicdata->nBytesInM != 0 )
++	{
++		rtw_secmicappendbyte(pmicdata, 0 );
++	}
++	// The appendByte function has already computed the result.
++	secmicputuint32( dst, pmicdata->L );
++	secmicputuint32( dst+4, pmicdata->R );
++	// Reset to the empty message.
++	secmicclear(pmicdata);
++_func_exit_;		
++}
++
++
++void rtw_seccalctkipmic(u8 * key,u8 *header,u8 *data,u32 data_len,u8 *mic_code, u8 pri)
++{
++
++	struct mic_data	micdata;
++	u8 priority[4]={0x0,0x0,0x0,0x0};
++_func_enter_;		
++	rtw_secmicsetkey(&micdata, key);
++	priority[0]=pri;
++	
++	/* Michael MIC pseudo header: DA, SA, 3 x 0, Priority */
++	if(header[1]&1){   //ToDS==1
++			rtw_secmicappend(&micdata, &header[16], 6);  //DA
++		if(header[1]&2)  //From Ds==1
++			rtw_secmicappend(&micdata, &header[24], 6);
++		else
++			rtw_secmicappend(&micdata, &header[10], 6);		
++	}	
++	else{	//ToDS==0
++		rtw_secmicappend(&micdata, &header[4], 6);   //DA
++		if(header[1]&2)  //From Ds==1
++			rtw_secmicappend(&micdata, &header[16], 6);
++		else
++			rtw_secmicappend(&micdata, &header[10], 6);
++
++	}
++	rtw_secmicappend(&micdata, &priority[0], 4);
++
++	
++	rtw_secmicappend(&micdata, data, data_len);
++
++	rtw_secgetmic(&micdata,mic_code);
++_func_exit_;	
++}
++
++
++
++
++/* macros for extraction/creation of unsigned char/unsigned short values  */
++#define RotR1(v16)   ((((v16) >> 1) & 0x7FFF) ^ (((v16) & 1) << 15))
++#define   Lo8(v16)   ((u8)( (v16)       & 0x00FF))
++#define   Hi8(v16)   ((u8)(((v16) >> 8) & 0x00FF))
++#define  Lo16(v32)   ((u16)( (v32)       & 0xFFFF))
++#define  Hi16(v32)   ((u16)(((v32) >>16) & 0xFFFF))
++#define  Mk16(hi,lo) ((lo) ^ (((u16)(hi)) << 8))
++
++/* select the Nth 16-bit word of the temporal key unsigned char array TK[]   */
++#define  TK16(N)     Mk16(tk[2*(N)+1],tk[2*(N)])
++
++/* S-box lookup: 16 bits --> 16 bits */
++#define _S_(v16)     (Sbox1[0][Lo8(v16)] ^ Sbox1[1][Hi8(v16)])
++
++/* fixed algorithm "parameters" */
++#define PHASE1_LOOP_CNT   8    /* this needs to be "big enough"     */
++#define TA_SIZE           6    /*  48-bit transmitter address       */
++#define TK_SIZE          16    /* 128-bit temporal key              */
++#define P1K_SIZE         10    /*  80-bit Phase1 key                */
++#define RC4_KEY_SIZE     16    /* 128-bit RC4KEY (104 bits unknown) */
++
++
++/* 2-unsigned char by 2-unsigned char subset of the full AES S-box table */
++static const unsigned short Sbox1[2][256]=       /* Sbox for hash (can be in ROM)     */
++{ {
++   0xC6A5,0xF884,0xEE99,0xF68D,0xFF0D,0xD6BD,0xDEB1,0x9154,
++   0x6050,0x0203,0xCEA9,0x567D,0xE719,0xB562,0x4DE6,0xEC9A,
++   0x8F45,0x1F9D,0x8940,0xFA87,0xEF15,0xB2EB,0x8EC9,0xFB0B,
++   0x41EC,0xB367,0x5FFD,0x45EA,0x23BF,0x53F7,0xE496,0x9B5B,
++   0x75C2,0xE11C,0x3DAE,0x4C6A,0x6C5A,0x7E41,0xF502,0x834F,
++   0x685C,0x51F4,0xD134,0xF908,0xE293,0xAB73,0x6253,0x2A3F,
++   0x080C,0x9552,0x4665,0x9D5E,0x3028,0x37A1,0x0A0F,0x2FB5,
++   0x0E09,0x2436,0x1B9B,0xDF3D,0xCD26,0x4E69,0x7FCD,0xEA9F,
++   0x121B,0x1D9E,0x5874,0x342E,0x362D,0xDCB2,0xB4EE,0x5BFB,
++   0xA4F6,0x764D,0xB761,0x7DCE,0x527B,0xDD3E,0x5E71,0x1397,
++   0xA6F5,0xB968,0x0000,0xC12C,0x4060,0xE31F,0x79C8,0xB6ED,
++   0xD4BE,0x8D46,0x67D9,0x724B,0x94DE,0x98D4,0xB0E8,0x854A,
++   0xBB6B,0xC52A,0x4FE5,0xED16,0x86C5,0x9AD7,0x6655,0x1194,
++   0x8ACF,0xE910,0x0406,0xFE81,0xA0F0,0x7844,0x25BA,0x4BE3,
++   0xA2F3,0x5DFE,0x80C0,0x058A,0x3FAD,0x21BC,0x7048,0xF104,
++   0x63DF,0x77C1,0xAF75,0x4263,0x2030,0xE51A,0xFD0E,0xBF6D,
++   0x814C,0x1814,0x2635,0xC32F,0xBEE1,0x35A2,0x88CC,0x2E39,
++   0x9357,0x55F2,0xFC82,0x7A47,0xC8AC,0xBAE7,0x322B,0xE695,
++   0xC0A0,0x1998,0x9ED1,0xA37F,0x4466,0x547E,0x3BAB,0x0B83,
++   0x8CCA,0xC729,0x6BD3,0x283C,0xA779,0xBCE2,0x161D,0xAD76,
++   0xDB3B,0x6456,0x744E,0x141E,0x92DB,0x0C0A,0x486C,0xB8E4,
++   0x9F5D,0xBD6E,0x43EF,0xC4A6,0x39A8,0x31A4,0xD337,0xF28B,
++   0xD532,0x8B43,0x6E59,0xDAB7,0x018C,0xB164,0x9CD2,0x49E0,
++   0xD8B4,0xACFA,0xF307,0xCF25,0xCAAF,0xF48E,0x47E9,0x1018,
++   0x6FD5,0xF088,0x4A6F,0x5C72,0x3824,0x57F1,0x73C7,0x9751,
++   0xCB23,0xA17C,0xE89C,0x3E21,0x96DD,0x61DC,0x0D86,0x0F85,
++   0xE090,0x7C42,0x71C4,0xCCAA,0x90D8,0x0605,0xF701,0x1C12,
++   0xC2A3,0x6A5F,0xAEF9,0x69D0,0x1791,0x9958,0x3A27,0x27B9,
++   0xD938,0xEB13,0x2BB3,0x2233,0xD2BB,0xA970,0x0789,0x33A7,
++   0x2DB6,0x3C22,0x1592,0xC920,0x8749,0xAAFF,0x5078,0xA57A,
++   0x038F,0x59F8,0x0980,0x1A17,0x65DA,0xD731,0x84C6,0xD0B8,
++   0x82C3,0x29B0,0x5A77,0x1E11,0x7BCB,0xA8FC,0x6DD6,0x2C3A,
++  },
++ 
++
++  {  /* second half of table is unsigned char-reversed version of first! */
++   0xA5C6,0x84F8,0x99EE,0x8DF6,0x0DFF,0xBDD6,0xB1DE,0x5491,
++   0x5060,0x0302,0xA9CE,0x7D56,0x19E7,0x62B5,0xE64D,0x9AEC,
++   0x458F,0x9D1F,0x4089,0x87FA,0x15EF,0xEBB2,0xC98E,0x0BFB,
++   0xEC41,0x67B3,0xFD5F,0xEA45,0xBF23,0xF753,0x96E4,0x5B9B,
++   0xC275,0x1CE1,0xAE3D,0x6A4C,0x5A6C,0x417E,0x02F5,0x4F83,
++   0x5C68,0xF451,0x34D1,0x08F9,0x93E2,0x73AB,0x5362,0x3F2A,
++   0x0C08,0x5295,0x6546,0x5E9D,0x2830,0xA137,0x0F0A,0xB52F,
++   0x090E,0x3624,0x9B1B,0x3DDF,0x26CD,0x694E,0xCD7F,0x9FEA,
++   0x1B12,0x9E1D,0x7458,0x2E34,0x2D36,0xB2DC,0xEEB4,0xFB5B,
++   0xF6A4,0x4D76,0x61B7,0xCE7D,0x7B52,0x3EDD,0x715E,0x9713,
++   0xF5A6,0x68B9,0x0000,0x2CC1,0x6040,0x1FE3,0xC879,0xEDB6,
++   0xBED4,0x468D,0xD967,0x4B72,0xDE94,0xD498,0xE8B0,0x4A85,
++   0x6BBB,0x2AC5,0xE54F,0x16ED,0xC586,0xD79A,0x5566,0x9411,
++   0xCF8A,0x10E9,0x0604,0x81FE,0xF0A0,0x4478,0xBA25,0xE34B,
++   0xF3A2,0xFE5D,0xC080,0x8A05,0xAD3F,0xBC21,0x4870,0x04F1,
++   0xDF63,0xC177,0x75AF,0x6342,0x3020,0x1AE5,0x0EFD,0x6DBF,
++   0x4C81,0x1418,0x3526,0x2FC3,0xE1BE,0xA235,0xCC88,0x392E,
++   0x5793,0xF255,0x82FC,0x477A,0xACC8,0xE7BA,0x2B32,0x95E6,
++   0xA0C0,0x9819,0xD19E,0x7FA3,0x6644,0x7E54,0xAB3B,0x830B,
++   0xCA8C,0x29C7,0xD36B,0x3C28,0x79A7,0xE2BC,0x1D16,0x76AD,
++   0x3BDB,0x5664,0x4E74,0x1E14,0xDB92,0x0A0C,0x6C48,0xE4B8,
++   0x5D9F,0x6EBD,0xEF43,0xA6C4,0xA839,0xA431,0x37D3,0x8BF2,
++   0x32D5,0x438B,0x596E,0xB7DA,0x8C01,0x64B1,0xD29C,0xE049,
++   0xB4D8,0xFAAC,0x07F3,0x25CF,0xAFCA,0x8EF4,0xE947,0x1810,
++   0xD56F,0x88F0,0x6F4A,0x725C,0x2438,0xF157,0xC773,0x5197,
++   0x23CB,0x7CA1,0x9CE8,0x213E,0xDD96,0xDC61,0x860D,0x850F,
++   0x90E0,0x427C,0xC471,0xAACC,0xD890,0x0506,0x01F7,0x121C,
++   0xA3C2,0x5F6A,0xF9AE,0xD069,0x9117,0x5899,0x273A,0xB927,
++   0x38D9,0x13EB,0xB32B,0x3322,0xBBD2,0x70A9,0x8907,0xA733,
++   0xB62D,0x223C,0x9215,0x20C9,0x4987,0xFFAA,0x7850,0x7AA5,
++   0x8F03,0xF859,0x8009,0x171A,0xDA65,0x31D7,0xC684,0xB8D0,
++   0xC382,0xB029,0x775A,0x111E,0xCB7B,0xFCA8,0xD66D,0x3A2C,
++  }
++};
++ 
++ /*
++**********************************************************************
++* Routine: Phase 1 -- generate P1K, given TA, TK, IV32
++*
++* Inputs:
++*     tk[]      = temporal key                         [128 bits]
++*     ta[]      = transmitter's MAC address            [ 48 bits]
++*     iv32      = upper 32 bits of IV                  [ 32 bits]
++* Output:
++*     p1k[]     = Phase 1 key                          [ 80 bits]
++*
++* Note:
++*     This function only needs to be called every 2**16 packets,
++*     although in theory it could be called every packet.
++*
++**********************************************************************
++*/
++static void phase1(u16 *p1k,const u8 *tk,const u8 *ta,u32 iv32)
++{
++	sint  i;
++_func_enter_;
++	/* Initialize the 80 bits of P1K[] from IV32 and TA[0..5]     */
++	p1k[0]      = Lo16(iv32);
++	p1k[1]      = Hi16(iv32);
++	p1k[2]      = Mk16(ta[1],ta[0]); /* use TA[] as little-endian */
++	p1k[3]      = Mk16(ta[3],ta[2]);
++	p1k[4]      = Mk16(ta[5],ta[4]);
++
++	/* Now compute an unbalanced Feistel cipher with 80-bit block */
++	/* size on the 80-bit block P1K[], using the 128-bit key TK[] */
++	for (i=0; i < PHASE1_LOOP_CNT ;i++)
++	{                 /* Each add operation here is mod 2**16 */
++      		p1k[0] += _S_(p1k[4] ^ TK16((i&1)+0));
++		p1k[1] += _S_(p1k[0] ^ TK16((i&1)+2));
++		p1k[2] += _S_(p1k[1] ^ TK16((i&1)+4));
++		p1k[3] += _S_(p1k[2] ^ TK16((i&1)+6));
++		p1k[4] += _S_(p1k[3] ^ TK16((i&1)+0));
++		p1k[4] +=  (unsigned short)i;                    /* avoid "slide attacks" */
++        }
++_func_exit_;
++}
++ 
++
++/*
++**********************************************************************
++* Routine: Phase 2 -- generate RC4KEY, given TK, P1K, IV16
++*
++* Inputs:
++*     tk[]      = Temporal key                         [128 bits]
++*     p1k[]     = Phase 1 output key                   [ 80 bits]
++*     iv16      = low 16 bits of IV counter            [ 16 bits]
++* Output:
++*     rc4key[]  = the key used to encrypt the packet   [128 bits]
++*
++* Note:
++*     The value {TA,IV32,IV16} for Phase1/Phase2 must be unique
++*     across all packets using the same key TK value. Then, for a
++*     given value of TK[], this TKIP48 construction guarantees that
++*     the final RC4KEY value is unique across all packets.
++*
++* Suggested implementation optimization: if PPK[] is "overlaid"
++*     appropriately on RC4KEY[], there is no need for the final
++*     for loop below that copies the PPK[] result into RC4KEY[].
++*
++**********************************************************************
++*/
++static void phase2(u8 *rc4key,const u8 *tk,const u16 *p1k,u16 iv16)
++{
++	sint  i;
++	u16 PPK[6];                          /* temporary key for mixing    */
++_func_enter_;
++	/* Note: all adds in the PPK[] equations below are mod 2**16         */
++	for (i=0;i<5;i++) PPK[i]=p1k[i];      /* first, copy P1K to PPK      */
++		PPK[5]  =  p1k[4] +iv16;             /* next,  add in IV16          */
++
++	/* Bijective non-linear mixing of the 96 bits of PPK[0..5]           */
++	PPK[0] +=    _S_(PPK[5] ^ TK16(0));   /* Mix key in each "round"     */
++	PPK[1] +=    _S_(PPK[0] ^ TK16(1));
++	PPK[2] +=    _S_(PPK[1] ^ TK16(2));
++	PPK[3] +=    _S_(PPK[2] ^ TK16(3));
++	PPK[4] +=    _S_(PPK[3] ^ TK16(4));
++	PPK[5] +=    _S_(PPK[4] ^ TK16(5));   /* Total # S-box lookups == 6  */
++
++	/* Final sweep: bijective, "linear". Rotates kill LSB correlations   */
++	PPK[0] +=  RotR1(PPK[5] ^ TK16(6));
++	PPK[1] +=  RotR1(PPK[0] ^ TK16(7));   /* Use all of TK[] in Phase2   */
++	PPK[2] +=  RotR1(PPK[1]);
++	PPK[3] +=  RotR1(PPK[2]);
++	PPK[4] +=  RotR1(PPK[3]);
++	PPK[5] +=  RotR1(PPK[4]);
++	/* Note: At this point, for a given key TK[0..15], the 96-bit output */
++	/*       value PPK[0..5] is guaranteed to be unique, as a function   */
++	/*       of the 96-bit "input" value   {TA,IV32,IV16}. That is, P1K  */
++	/*       is now a keyed permutation of {TA,IV32,IV16}.               */
++
++	/* Set RC4KEY[0..3], which includes "cleartext" portion of RC4 key   */
++	rc4key[0] = Hi8(iv16);                /* RC4KEY[0..2] is the WEP IV  */
++	rc4key[1] =(Hi8(iv16) | 0x20) & 0x7F; /* Help avoid weak (FMS) keys  */
++	rc4key[2] = Lo8(iv16);
++	rc4key[3] = Lo8((PPK[5] ^ TK16(0)) >> 1);
++	 
++
++	/* Copy 96 bits of PPK[0..5] to RC4KEY[4..15]  (little-endian)       */
++	for (i=0;i<6;i++)
++	{
++		rc4key[4+2*i] = Lo8(PPK[i]);
++		rc4key[5+2*i] = Hi8(PPK[i]);
++	}
++_func_exit_;	
++}
++
++
++//The hlen isn't include the IV
++u32	rtw_tkip_encrypt(_adapter *padapter, u8 *pxmitframe)
++{																	// exclude ICV
++	u16	pnl;
++	u32	pnh;
++	u8	rc4key[16];
++	u8   ttkey[16];
++	u8	crc[4];
++	struct arc4context mycontext;
++	sint 			curfragnum,length;
++	u32	prwskeylen;
++
++	u8	*pframe, *payload,*iv,*prwskey;
++	union pn48 dot11txpn;
++	struct	sta_info		*stainfo;
++	struct	pkt_attrib	 *pattrib = &((struct xmit_frame *)pxmitframe)->attrib;
++	struct 	security_priv	*psecuritypriv=&padapter->securitypriv;
++	struct	xmit_priv		*pxmitpriv=&padapter->xmitpriv;
++	u32	res=_SUCCESS;
++_func_enter_;
++
++	if(((struct xmit_frame*)pxmitframe)->buf_addr==NULL)
++		return _FAIL;
++
++#ifdef CONFIG_USB_TX_AGGREGATION
++	pframe = ((struct xmit_frame*)pxmitframe)->buf_addr + TXDESC_SIZE +
++		 (((struct xmit_frame*)pxmitframe)->pkt_offset * PACKET_OFFSET_SZ);
++#else
++	pframe = ((struct xmit_frame*)pxmitframe)->buf_addr + TXDESC_OFFSET;
++#endif
++
++	//4 start to encrypt each fragment
++	if(pattrib->encrypt==_TKIP_){
++
++		if(pattrib->psta)
++		{
++			stainfo = pattrib->psta;
++		}
++		else
++		{
++			DBG_871X("%s, call rtw_get_stainfo()\n", __func__);
++			stainfo=rtw_get_stainfo(&padapter->stapriv ,&pattrib->ra[0] );
++		}	
++		
++		if (stainfo!=NULL){
++
++			if(!(stainfo->state &_FW_LINKED))
++			{
++				DBG_871X("%s, psta->state(0x%x) != _FW_LINKED\n", __func__, stainfo->state);
++				return _FAIL;
++			}
++			
++			RT_TRACE(_module_rtl871x_security_c_,_drv_err_,("rtw_tkip_encrypt: stainfo!=NULL!!!\n"));
++
++			if(IS_MCAST(pattrib->ra))
++			{
++				prwskey=psecuritypriv->dot118021XGrpKey[psecuritypriv->dot118021XGrpKeyid].skey;
++			}
++			else
++			{
++				prwskey=&stainfo->dot118021x_UncstKey.skey[0];
++			}
++
++			prwskeylen=16;
++
++			for(curfragnum=0;curfragnum<pattrib->nr_frags;curfragnum++){
++				iv=pframe+pattrib->hdrlen;
++				payload=pframe+pattrib->iv_len+pattrib->hdrlen;
++				
++				GET_TKIP_PN(iv, dot11txpn);
++
++				pnl=(u16)(dot11txpn.val);
++				pnh=(u32)(dot11txpn.val>>16);
++
++				phase1((u16 *)&ttkey[0],prwskey,&pattrib->ta[0],pnh);
++
++				phase2(&rc4key[0],prwskey,(u16 *)&ttkey[0],pnl);	
++
++				if((curfragnum+1)==pattrib->nr_frags){	//4 the last fragment
++					length=pattrib->last_txcmdsz-pattrib->hdrlen-pattrib->iv_len- pattrib->icv_len;
++					RT_TRACE(_module_rtl871x_security_c_,_drv_info_,("pattrib->iv_len =%x, pattrib->icv_len =%x\n", pattrib->iv_len,pattrib->icv_len));
++					*((u32 *)crc)=cpu_to_le32(getcrc32(payload,length));/* modified by Amy*/
++
++					arcfour_init(&mycontext, rc4key,16);
++					arcfour_encrypt(&mycontext, payload, payload, length);
++					arcfour_encrypt(&mycontext, payload+length, crc, 4);
++
++				}
++				else{
++					length=pxmitpriv->frag_len-pattrib->hdrlen-pattrib->iv_len-pattrib->icv_len ;
++					*((u32 *)crc)=cpu_to_le32(getcrc32(payload,length));/* modified by Amy*/
++					arcfour_init(&mycontext,rc4key,16);
++					arcfour_encrypt(&mycontext, payload, payload, length);
++					arcfour_encrypt(&mycontext, payload+length, crc, 4);
++	
++				pframe+=pxmitpriv->frag_len;
++				pframe=(u8 *)RND4((SIZE_PTR)(pframe));
++
++				}
++			}
++
++
++		}
++		else{
++			RT_TRACE(_module_rtl871x_security_c_,_drv_err_,("rtw_tkip_encrypt: stainfo==NULL!!!\n"));
++                        DBG_871X("%s, psta==NUL\n", __func__);
++			res=_FAIL;
++		}
++						
++	}
++_func_exit_;	
++	return res;
++				
++}
++
++
++//The hlen isn't include the IV
++u32 rtw_tkip_decrypt(_adapter *padapter, u8 *precvframe)
++{																	// exclude ICV
++	u16 pnl;
++	u32 pnh;
++	u8   rc4key[16];
++	u8   ttkey[16];
++	u8	crc[4];
++	struct arc4context mycontext;
++	sint 			length;
++	u32	prwskeylen;
++
++	u8	*pframe, *payload,*iv,*prwskey;
++	union pn48 dot11txpn;
++	struct	sta_info		*stainfo;
++	struct	rx_pkt_attrib	 *prxattrib = &((union recv_frame *)precvframe)->u.hdr.attrib;
++	struct 	security_priv	*psecuritypriv=&padapter->securitypriv;
++//	struct	recv_priv		*precvpriv=&padapter->recvpriv;
++	u32		res=_SUCCESS;
++
++_func_enter_;
++
++	pframe=(unsigned char *)((union recv_frame*)precvframe)->u.hdr.rx_data;
++	
++	//4 start to decrypt recvframe
++	if(prxattrib->encrypt==_TKIP_){
++
++		stainfo=rtw_get_stainfo(&padapter->stapriv ,&prxattrib->ta[0] );
++		if (stainfo!=NULL){
++
++			if(IS_MCAST(prxattrib->ra))
++			{
++				static u32 start = 0;
++				static u32 no_gkey_bc_cnt = 0;
++				static u32 no_gkey_mc_cnt = 0;
++
++				if(psecuritypriv->binstallGrpkey==_FALSE)
++				{
++					res=_FAIL;
++
++					if (start == 0)
++						start = rtw_get_current_time();
++
++					if (is_broadcast_mac_addr(prxattrib->ra))
++						no_gkey_bc_cnt++;
++					else
++						no_gkey_mc_cnt++;
++
++					if (rtw_get_passing_time_ms(start) > 1000) {
++						if (no_gkey_bc_cnt || no_gkey_mc_cnt) {
++							DBG_871X_LEVEL(_drv_always_, FUNC_ADPT_FMT" no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n",
++								FUNC_ADPT_ARG(padapter), no_gkey_bc_cnt, no_gkey_mc_cnt);
++						}
++						start = rtw_get_current_time();
++						no_gkey_bc_cnt = 0;
++						no_gkey_mc_cnt = 0;
++					}
++					goto exit;
++				}
++
++				if (no_gkey_bc_cnt || no_gkey_mc_cnt) {
++					DBG_871X_LEVEL(_drv_always_, FUNC_ADPT_FMT" gkey installed. no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n",
++						FUNC_ADPT_ARG(padapter), no_gkey_bc_cnt, no_gkey_mc_cnt);
++				}
++				start = 0;
++				no_gkey_bc_cnt = 0;
++				no_gkey_mc_cnt = 0;
++
++				//DBG_871X("rx bc/mc packets, to perform sw rtw_tkip_decrypt\n");
++				//prwskey = psecuritypriv->dot118021XGrpKey[psecuritypriv->dot118021XGrpKeyid].skey;
++				prwskey = psecuritypriv->dot118021XGrpKey[prxattrib->key_index].skey;
++				prwskeylen=16;
++			}
++			else
++			{
++			        RT_TRACE(_module_rtl871x_security_c_,_drv_err_,("rtw_tkip_decrypt: stainfo!=NULL!!!\n"));
++				prwskey=&stainfo->dot118021x_UncstKey.skey[0];
++				prwskeylen=16;
++			}
++			
++			iv=pframe+prxattrib->hdrlen;
++			payload=pframe+prxattrib->iv_len+prxattrib->hdrlen;
++			length= ((union recv_frame *)precvframe)->u.hdr.len-prxattrib->hdrlen-prxattrib->iv_len;
++				
++			GET_TKIP_PN(iv, dot11txpn);
++
++			pnl=(u16)(dot11txpn.val);
++			pnh=(u32)(dot11txpn.val>>16);
++
++			phase1((u16 *)&ttkey[0],prwskey,&prxattrib->ta[0],pnh);
++			phase2(&rc4key[0],prwskey,(unsigned short *)&ttkey[0],pnl);	
++
++			//4 decrypt payload include icv
++					
++			arcfour_init(&mycontext, rc4key,16);
++			arcfour_encrypt(&mycontext, payload, payload, length);
++
++			*((u32 *)crc)=le32_to_cpu(getcrc32(payload,length-4));
++
++			if(crc[3]!=payload[length-1] || crc[2]!=payload[length-2] || crc[1]!=payload[length-3] || crc[0]!=payload[length-4])
++			{
++			    RT_TRACE(_module_rtl871x_security_c_,_drv_err_,("rtw_wep_decrypt:icv error crc[3](%x)!=payload[length-1](%x) || crc[2](%x)!=payload[length-2](%x) || crc[1](%x)!=payload[length-3](%x) || crc[0](%x)!=payload[length-4](%x)\n",
++						crc[3],payload[length-1],crc[2],payload[length-2],crc[1],payload[length-3],crc[0],payload[length-4]));
++				res=_FAIL;
++			}
++						
++		
++		}
++		else{
++			RT_TRACE(_module_rtl871x_security_c_,_drv_err_,("rtw_tkip_decrypt: stainfo==NULL!!!\n"));
++			res=_FAIL;
++		}
++						
++	}
++_func_exit_;	
++exit:
++	return res;
++				
++}
++
++
++//3			=====AES related=====
++
++
++
++#define MAX_MSG_SIZE	2048
++/*****************************/
++/******** SBOX Table *********/
++/*****************************/
++
++  static  u8 sbox_table[256] =
++    {
++        0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5,
++        0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76,
++        0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0,
++        0xad, 0xd4, 0xa2, 0xaf, 0x9c, 0xa4, 0x72, 0xc0,
++        0xb7, 0xfd, 0x93, 0x26, 0x36, 0x3f, 0xf7, 0xcc,
++        0x34, 0xa5, 0xe5, 0xf1, 0x71, 0xd8, 0x31, 0x15,
++        0x04, 0xc7, 0x23, 0xc3, 0x18, 0x96, 0x05, 0x9a,
++        0x07, 0x12, 0x80, 0xe2, 0xeb, 0x27, 0xb2, 0x75,
++        0x09, 0x83, 0x2c, 0x1a, 0x1b, 0x6e, 0x5a, 0xa0,
++        0x52, 0x3b, 0xd6, 0xb3, 0x29, 0xe3, 0x2f, 0x84,
++        0x53, 0xd1, 0x00, 0xed, 0x20, 0xfc, 0xb1, 0x5b,
++        0x6a, 0xcb, 0xbe, 0x39, 0x4a, 0x4c, 0x58, 0xcf,
++        0xd0, 0xef, 0xaa, 0xfb, 0x43, 0x4d, 0x33, 0x85,
++        0x45, 0xf9, 0x02, 0x7f, 0x50, 0x3c, 0x9f, 0xa8,
++        0x51, 0xa3, 0x40, 0x8f, 0x92, 0x9d, 0x38, 0xf5,
++        0xbc, 0xb6, 0xda, 0x21, 0x10, 0xff, 0xf3, 0xd2,
++        0xcd, 0x0c, 0x13, 0xec, 0x5f, 0x97, 0x44, 0x17,
++        0xc4, 0xa7, 0x7e, 0x3d, 0x64, 0x5d, 0x19, 0x73,
++        0x60, 0x81, 0x4f, 0xdc, 0x22, 0x2a, 0x90, 0x88,
++        0x46, 0xee, 0xb8, 0x14, 0xde, 0x5e, 0x0b, 0xdb,
++        0xe0, 0x32, 0x3a, 0x0a, 0x49, 0x06, 0x24, 0x5c,
++        0xc2, 0xd3, 0xac, 0x62, 0x91, 0x95, 0xe4, 0x79,
++        0xe7, 0xc8, 0x37, 0x6d, 0x8d, 0xd5, 0x4e, 0xa9,
++        0x6c, 0x56, 0xf4, 0xea, 0x65, 0x7a, 0xae, 0x08,
++        0xba, 0x78, 0x25, 0x2e, 0x1c, 0xa6, 0xb4, 0xc6,
++        0xe8, 0xdd, 0x74, 0x1f, 0x4b, 0xbd, 0x8b, 0x8a,
++        0x70, 0x3e, 0xb5, 0x66, 0x48, 0x03, 0xf6, 0x0e,
++        0x61, 0x35, 0x57, 0xb9, 0x86, 0xc1, 0x1d, 0x9e,
++        0xe1, 0xf8, 0x98, 0x11, 0x69, 0xd9, 0x8e, 0x94,
++        0x9b, 0x1e, 0x87, 0xe9, 0xce, 0x55, 0x28, 0xdf,
++        0x8c, 0xa1, 0x89, 0x0d, 0xbf, 0xe6, 0x42, 0x68,
++        0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16
++    };
++
++/*****************************/
++/**** Function Prototypes ****/
++/*****************************/
++
++static void bitwise_xor(u8 *ina, u8 *inb, u8 *out);
++static void construct_mic_iv(
++                        u8 *mic_header1,
++                        sint qc_exists,
++                        sint a4_exists,
++                        u8 *mpdu,
++                        uint payload_length,
++                        u8 * pn_vector,
++                        uint frtype);// add for CONFIG_IEEE80211W, none 11w also can use
++static void construct_mic_header1(
++                        u8 *mic_header1,
++                        sint header_length,
++                        u8 *mpdu,
++                        uint frtype);// add for CONFIG_IEEE80211W, none 11w also can use
++static void construct_mic_header2(
++                    u8 *mic_header2,
++                    u8 *mpdu,
++                    sint a4_exists,
++                    sint qc_exists);
++static void construct_ctr_preload(
++                        u8 *ctr_preload,
++                        sint a4_exists,
++                        sint qc_exists,
++                        u8 *mpdu,
++                        u8 *pn_vector,
++                        sint c,
++                        uint frtype);// add for CONFIG_IEEE80211W, none 11w also can use
++static void xor_128(u8 *a, u8 *b, u8 *out);
++static void xor_32(u8 *a, u8 *b, u8 *out);
++static u8 sbox(u8 a);
++static void next_key(u8 *key, sint round);
++static void byte_sub(u8 *in, u8 *out);
++static void shift_row(u8 *in, u8 *out);
++static void mix_column(u8 *in, u8 *out);
++#ifndef PLATFORM_FREEBSD 
++static void add_round_key( u8 *shiftrow_in,
++                    u8 *mcol_in,
++                    u8 *block_in,
++                    sint round,
++                    u8 *out);
++#endif //PLATFORM_FREEBSD
++static void aes128k128d(u8 *key, u8 *data, u8 *ciphertext);
++
++
++/****************************************/
++/* aes128k128d()                        */
++/* Performs a 128 bit AES encrypt with  */
++/* 128 bit data.                        */
++/****************************************/
++static void xor_128(u8 *a, u8 *b, u8 *out)
++{
++    sint i;
++_func_enter_;	
++    for (i=0;i<16; i++)
++    {
++        out[i] = a[i] ^ b[i];
++    }
++_func_exit_;		
++}
++
++
++static void xor_32(u8 *a, u8 *b, u8 *out)
++{
++    sint i;
++_func_enter_;		
++    for (i=0;i<4; i++)
++    {
++        out[i] = a[i] ^ b[i];
++    }
++_func_exit_;		
++}
++
++
++static u8 sbox(u8 a)
++{
++    return sbox_table[(sint)a];
++}
++
++
++static void next_key(u8 *key, sint round)
++{
++    u8 rcon;
++    u8 sbox_key[4];
++    u8 rcon_table[12] =
++    {
++        0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80,
++        0x1b, 0x36, 0x36, 0x36
++    };
++_func_enter_;		
++    sbox_key[0] = sbox(key[13]);
++    sbox_key[1] = sbox(key[14]);
++    sbox_key[2] = sbox(key[15]);
++    sbox_key[3] = sbox(key[12]);
++
++    rcon = rcon_table[round];
++
++    xor_32(&key[0], sbox_key, &key[0]);
++    key[0] = key[0] ^ rcon;
++
++    xor_32(&key[4], &key[0], &key[4]);
++    xor_32(&key[8], &key[4], &key[8]);
++    xor_32(&key[12], &key[8], &key[12]);
++_func_exit_;		
++}
++
++
++static void byte_sub(u8 *in, u8 *out)
++{
++    sint i;
++_func_enter_;			
++    for (i=0; i< 16; i++)
++    {
++        out[i] = sbox(in[i]);
++    }
++_func_exit_;	
++}
++
++
++static void shift_row(u8 *in, u8 *out)
++{
++_func_enter_;	
++    out[0] =  in[0];
++    out[1] =  in[5];
++    out[2] =  in[10];
++    out[3] =  in[15];
++    out[4] =  in[4];
++    out[5] =  in[9];
++    out[6] =  in[14];
++    out[7] =  in[3];
++    out[8] =  in[8];
++    out[9] =  in[13];
++    out[10] = in[2];
++    out[11] = in[7];
++    out[12] = in[12];
++    out[13] = in[1];
++    out[14] = in[6];
++    out[15] = in[11];
++_func_exit_;		
++}
++
++
++static void mix_column(u8 *in, u8 *out)
++{
++    sint i;
++    u8 add1b[4];
++    u8 add1bf7[4];
++    u8 rotl[4];
++    u8 swap_halfs[4];
++    u8 andf7[4];
++    u8 rotr[4];
++    u8 temp[4];
++    u8 tempb[4];
++_func_enter_;	
++    for (i=0 ; i<4; i++)
++    {
++        if ((in[i] & 0x80)== 0x80)
++            add1b[i] = 0x1b;
++        else
++            add1b[i] = 0x00;
++    }
++
++    swap_halfs[0] = in[2];    /* Swap halfs */
++    swap_halfs[1] = in[3];
++    swap_halfs[2] = in[0];
++    swap_halfs[3] = in[1];
++
++    rotl[0] = in[3];        /* Rotate left 8 bits */
++    rotl[1] = in[0];
++    rotl[2] = in[1];
++    rotl[3] = in[2];
++
++    andf7[0] = in[0] & 0x7f;
++    andf7[1] = in[1] & 0x7f;
++    andf7[2] = in[2] & 0x7f;
++    andf7[3] = in[3] & 0x7f;
++
++    for (i = 3; i>0; i--)    /* logical shift left 1 bit */
++    {
++        andf7[i] = andf7[i] << 1;
++        if ((andf7[i-1] & 0x80) == 0x80)
++        {
++            andf7[i] = (andf7[i] | 0x01);
++        }
++    }
++    andf7[0] = andf7[0] << 1;
++    andf7[0] = andf7[0] & 0xfe;
++
++    xor_32(add1b, andf7, add1bf7);
++
++    xor_32(in, add1bf7, rotr);
++
++    temp[0] = rotr[0];         /* Rotate right 8 bits */
++    rotr[0] = rotr[1];
++    rotr[1] = rotr[2];
++    rotr[2] = rotr[3];
++    rotr[3] = temp[0];
++
++    xor_32(add1bf7, rotr, temp);
++    xor_32(swap_halfs, rotl,tempb);
++    xor_32(temp, tempb, out);
++_func_exit_;		
++}
++
++
++static void aes128k128d(u8 *key, u8 *data, u8 *ciphertext)
++{
++    sint round;
++    sint i;
++    u8 intermediatea[16];
++    u8 intermediateb[16];
++    u8 round_key[16];
++_func_enter_;	
++    for(i=0; i<16; i++) round_key[i] = key[i];
++
++    for (round = 0; round < 11; round++)
++    {
++        if (round == 0)
++        {
++            xor_128(round_key, data, ciphertext);
++            next_key(round_key, round);
++        }
++        else if (round == 10)
++        {
++            byte_sub(ciphertext, intermediatea);
++            shift_row(intermediatea, intermediateb);
++            xor_128(intermediateb, round_key, ciphertext);
++        }
++        else    /* 1 - 9 */
++        {
++            byte_sub(ciphertext, intermediatea);
++            shift_row(intermediatea, intermediateb);
++            mix_column(&intermediateb[0], &intermediatea[0]);
++            mix_column(&intermediateb[4], &intermediatea[4]);
++            mix_column(&intermediateb[8], &intermediatea[8]);
++            mix_column(&intermediateb[12], &intermediatea[12]);
++            xor_128(intermediatea, round_key, ciphertext);
++            next_key(round_key, round);
++        }
++    }
++_func_exit_;	
++}
++
++
++/************************************************/
++/* construct_mic_iv()                           */
++/* Builds the MIC IV from header fields and PN  */
++/* Baron think the function is construct CCM    */
++/* nonce                                        */
++/************************************************/
++static void construct_mic_iv(
++                        u8 *mic_iv,
++                        sint qc_exists,
++                        sint a4_exists,
++                        u8 *mpdu,
++                        uint payload_length,
++                        u8 *pn_vector,
++                        uint frtype// add for CONFIG_IEEE80211W, none 11w also can use
++                        )
++{
++    sint i;
++_func_enter_;	
++    mic_iv[0] = 0x59;
++    if (qc_exists && a4_exists) mic_iv[1] = mpdu[30] & 0x0f;    /* QoS_TC           */
++    if (qc_exists && !a4_exists) mic_iv[1] = mpdu[24] & 0x0f;   /* mute bits 7-4    */
++    if (!qc_exists) mic_iv[1] = 0x00;
++#ifdef CONFIG_IEEE80211W
++	//802.11w management frame should set management bit(4)
++    if(frtype == WIFI_MGT_TYPE)
++		mic_iv[1] |= BIT(4);
++#endif //CONFIG_IEEE80211W
++    for (i = 2; i < 8; i++)
++        mic_iv[i] = mpdu[i + 8];                    /* mic_iv[2:7] = A2[0:5] = mpdu[10:15] */
++    #ifdef CONSISTENT_PN_ORDER
++        for (i = 8; i < 14; i++)
++            mic_iv[i] = pn_vector[i - 8];           /* mic_iv[8:13] = PN[0:5] */
++    #else
++        for (i = 8; i < 14; i++)
++            mic_iv[i] = pn_vector[13 - i];          /* mic_iv[8:13] = PN[5:0] */
++    #endif
++    mic_iv[14] = (unsigned char) (payload_length / 256);
++    mic_iv[15] = (unsigned char) (payload_length % 256);
++_func_exit_;		
++}
++
++
++/************************************************/
++/* construct_mic_header1()                      */
++/* Builds the first MIC header block from       */
++/* header fields.                               */
++/* Build AAD SC,A1,A2                           */
++/************************************************/
++static void construct_mic_header1(
++                        u8 *mic_header1,
++                        sint header_length,
++                        u8 *mpdu,
++                        uint frtype// add for CONFIG_IEEE80211W, none 11w also can use
++                        )
++{
++_func_enter_;	
++    mic_header1[0] = (u8)((header_length - 2) / 256);
++    mic_header1[1] = (u8)((header_length - 2) % 256);
++#ifdef CONFIG_IEEE80211W
++    //802.11w management frame don't AND subtype bits 4,5,6 of frame control field
++    if(frtype == WIFI_MGT_TYPE)
++		mic_header1[2] = mpdu[0];
++	else
++#endif //CONFIG_IEEE80211W
++		mic_header1[2] = mpdu[0] & 0xcf;    /* Mute CF poll & CF ack bits */
++    
++    mic_header1[3] = mpdu[1] & 0xc7;    /* Mute retry, more data and pwr mgt bits */
++    mic_header1[4] = mpdu[4];       /* A1 */
++    mic_header1[5] = mpdu[5];
++    mic_header1[6] = mpdu[6];
++    mic_header1[7] = mpdu[7];
++    mic_header1[8] = mpdu[8];
++    mic_header1[9] = mpdu[9];
++    mic_header1[10] = mpdu[10];     /* A2 */
++    mic_header1[11] = mpdu[11];
++    mic_header1[12] = mpdu[12];
++    mic_header1[13] = mpdu[13];
++    mic_header1[14] = mpdu[14];
++    mic_header1[15] = mpdu[15];
++_func_exit_;	
++}
++
++
++/************************************************/
++/* construct_mic_header2()                      */
++/* Builds the last MIC header block from        */
++/* header fields.                               */
++/************************************************/
++static void construct_mic_header2(
++                u8 *mic_header2,
++                u8 *mpdu,
++                sint a4_exists,
++                sint qc_exists
++                )
++{
++    sint i;
++_func_enter_;	
++    for (i = 0; i<16; i++) mic_header2[i]=0x00;
++
++    mic_header2[0] = mpdu[16];    /* A3 */
++    mic_header2[1] = mpdu[17];
++    mic_header2[2] = mpdu[18];
++    mic_header2[3] = mpdu[19];
++    mic_header2[4] = mpdu[20];
++    mic_header2[5] = mpdu[21];
++
++    //mic_header2[6] = mpdu[22] & 0xf0;   /* SC */
++    mic_header2[6] = 0x00;
++    mic_header2[7] = 0x00; /* mpdu[23]; */
++
++
++    if (!qc_exists && a4_exists)
++    {
++        for (i=0;i<6;i++) mic_header2[8+i] = mpdu[24+i];   /* A4 */
++
++    }
++
++    if (qc_exists && !a4_exists)
++    {
++        mic_header2[8] = mpdu[24] & 0x0f; /* mute bits 15 - 4 */
++        mic_header2[9] = mpdu[25] & 0x00;
++    }
++
++    if (qc_exists && a4_exists)
++    {
++        for (i=0;i<6;i++) mic_header2[8+i] = mpdu[24+i];   /* A4 */
++
++        mic_header2[14] = mpdu[30] & 0x0f;
++        mic_header2[15] = mpdu[31] & 0x00;
++    }
++
++_func_exit_;	
++}
++
++
++/************************************************/
++/* construct_mic_header2()                      */
++/* Builds the last MIC header block from        */
++/* header fields.                               */
++/* Baron think the function is construct CCM    */
++/* nonce                                        */
++/************************************************/
++static void construct_ctr_preload(
++                        u8 *ctr_preload,
++                        sint a4_exists,
++                        sint qc_exists,
++                        u8 *mpdu,
++                        u8 *pn_vector,
++                        sint c,
++                        uint frtype // add for CONFIG_IEEE80211W, none 11w also can use
++                        )
++{
++    sint i = 0;
++_func_enter_;		
++    for (i=0; i<16; i++) ctr_preload[i] = 0x00;
++    i = 0;
++	
++    ctr_preload[0] = 0x01;                                  /* flag */
++    if (qc_exists && a4_exists) 
++		ctr_preload[1] = mpdu[30] & 0x0f;   /* QoC_Control */
++    if (qc_exists && !a4_exists) 
++		ctr_preload[1] = mpdu[24] & 0x0f;
++#ifdef CONFIG_IEEE80211W
++	//802.11w management frame should set management bit(4)
++	if(frtype == WIFI_MGT_TYPE)
++		ctr_preload[1] |= BIT(4);
++#endif //CONFIG_IEEE80211W
++    for (i = 2; i < 8; i++)
++        ctr_preload[i] = mpdu[i + 8];                       /* ctr_preload[2:7] = A2[0:5] = mpdu[10:15] */
++    #ifdef CONSISTENT_PN_ORDER
++      for (i = 8; i < 14; i++)
++            ctr_preload[i] =    pn_vector[i - 8];           /* ctr_preload[8:13] = PN[0:5] */
++    #else
++      for (i = 8; i < 14; i++)
++            ctr_preload[i] =    pn_vector[13 - i];          /* ctr_preload[8:13] = PN[5:0] */
++    #endif
++    ctr_preload[14] =  (unsigned char) (c / 256); /* Ctr */
++    ctr_preload[15] =  (unsigned char) (c % 256);
++_func_exit_;		
++}
++
++
++/************************************/
++/* bitwise_xor()                    */
++/* A 128 bit, bitwise exclusive or  */
++/************************************/
++static void bitwise_xor(u8 *ina, u8 *inb, u8 *out)
++{
++    sint i;
++_func_enter_;		
++    for (i=0; i<16; i++)
++    {
++        out[i] = ina[i] ^ inb[i];
++    }
++_func_exit_;		
++}
++
++
++static sint aes_cipher(u8 *key, uint	hdrlen,
++			u8 *pframe, uint plen)
++{
++//	/*static*/ unsigned char	message[MAX_MSG_SIZE];
++	uint	qc_exists, a4_exists, i, j, payload_remainder,
++		num_blocks, payload_index;
++
++	u8 pn_vector[6];
++	u8 mic_iv[16];
++	u8 mic_header1[16];
++	u8 mic_header2[16];
++	u8 ctr_preload[16];
++
++	/* Intermediate Buffers */
++	u8 chain_buffer[16];
++	u8 aes_out[16];
++	u8 padded_buffer[16];
++	u8 mic[8];
++//	uint	offset = 0;
++	uint	frtype  = GetFrameType(pframe);
++	uint	frsubtype  = GetFrameSubType(pframe);
++	
++_func_enter_;		
++	frsubtype=frsubtype>>4;
++
++
++	_rtw_memset((void *)mic_iv, 0, 16);
++	_rtw_memset((void *)mic_header1, 0, 16);
++	_rtw_memset((void *)mic_header2, 0, 16);
++	_rtw_memset((void *)ctr_preload, 0, 16);
++	_rtw_memset((void *)chain_buffer, 0, 16);
++	_rtw_memset((void *)aes_out, 0, 16);
++	_rtw_memset((void *)padded_buffer, 0, 16);
++
++	if ((hdrlen == WLAN_HDR_A3_LEN )||(hdrlen ==  WLAN_HDR_A3_QOS_LEN))
++		a4_exists = 0;
++	else
++		a4_exists = 1;
++
++	if (
++		((frtype|frsubtype) == WIFI_DATA_CFACK) ||
++		((frtype|frsubtype) == WIFI_DATA_CFPOLL)||
++		((frtype|frsubtype) == WIFI_DATA_CFACKPOLL))
++		{
++			qc_exists = 1;
++					if(hdrlen !=  WLAN_HDR_A3_QOS_LEN){
++				 
++					hdrlen += 2;
++			}
++		}
++	// add for CONFIG_IEEE80211W, none 11w also can use
++	else if ((frtype == WIFI_DATA) &&
++		((frsubtype == 0x08) ||
++		(frsubtype == 0x09)||
++		(frsubtype == 0x0a)||
++		(frsubtype == 0x0b)))
++		{
++			if(hdrlen !=  WLAN_HDR_A3_QOS_LEN){
++				 
++					hdrlen += 2;
++			}
++			qc_exists = 1;
++		}
++	else
++		qc_exists = 0;
++
++	pn_vector[0]=pframe[hdrlen];
++	pn_vector[1]=pframe[hdrlen+1];
++	pn_vector[2]=pframe[hdrlen+4];
++	pn_vector[3]=pframe[hdrlen+5];
++	pn_vector[4]=pframe[hdrlen+6];
++	pn_vector[5]=pframe[hdrlen+7];
++	
++	construct_mic_iv(
++                        mic_iv,
++                        qc_exists,
++                        a4_exists,
++                        pframe,	 //message,
++                        plen,
++                        pn_vector,
++                        frtype // add for CONFIG_IEEE80211W, none 11w also can use
++                        );
++
++    construct_mic_header1(
++                            mic_header1,
++                            hdrlen,
++                            pframe,	//message
++                            frtype // add for CONFIG_IEEE80211W, none 11w also can use
++                            );
++    construct_mic_header2(
++                            mic_header2,
++                            pframe,	//message,
++                            a4_exists,
++                            qc_exists
++                            );
++
++
++	payload_remainder = plen % 16;
++    num_blocks = plen / 16;
++
++    /* Find start of payload */
++    payload_index = (hdrlen + 8);
++
++    /* Calculate MIC */
++    aes128k128d(key, mic_iv, aes_out);
++    bitwise_xor(aes_out, mic_header1, chain_buffer);
++    aes128k128d(key, chain_buffer, aes_out);
++    bitwise_xor(aes_out, mic_header2, chain_buffer);
++    aes128k128d(key, chain_buffer, aes_out);
++
++	for (i = 0; i < num_blocks; i++)
++    {
++        bitwise_xor(aes_out, &pframe[payload_index], chain_buffer);//bitwise_xor(aes_out, &message[payload_index], chain_buffer);
++
++        payload_index += 16;
++        aes128k128d(key, chain_buffer, aes_out);
++    }
++
++    /* Add on the final payload block if it needs padding */
++    if (payload_remainder > 0)
++    {
++        for (j = 0; j < 16; j++) padded_buffer[j] = 0x00;
++        for (j = 0; j < payload_remainder; j++)
++        {
++            padded_buffer[j] = pframe[payload_index++];//padded_buffer[j] = message[payload_index++];
++        }
++        bitwise_xor(aes_out, padded_buffer, chain_buffer);
++        aes128k128d(key, chain_buffer, aes_out);
++
++    }
++
++    for (j = 0 ; j < 8; j++) mic[j] = aes_out[j];
++
++    /* Insert MIC into payload */
++    for (j = 0; j < 8; j++)
++    	pframe[payload_index+j] = mic[j];	//message[payload_index+j] = mic[j];
++
++	payload_index = hdrlen + 8;
++	for (i=0; i< num_blocks; i++)
++    {
++        construct_ctr_preload(
++                                ctr_preload,
++                                a4_exists,
++                                qc_exists,
++                                pframe,	//message,
++                                pn_vector,
++                                i+1,
++                                frtype); // add for CONFIG_IEEE80211W, none 11w also can use
++        aes128k128d(key, ctr_preload, aes_out);
++        bitwise_xor(aes_out, &pframe[payload_index], chain_buffer);//bitwise_xor(aes_out, &message[payload_index], chain_buffer);
++        for (j=0; j<16;j++) pframe[payload_index++] = chain_buffer[j];//for (j=0; j<16;j++) message[payload_index++] = chain_buffer[j];
++    }
++
++    if (payload_remainder > 0)          /* If there is a short final block, then pad it,*/
++    {                                   /* encrypt it and copy the unpadded part back   */
++        construct_ctr_preload(
++                                ctr_preload,
++                                a4_exists,
++                                qc_exists,
++                                pframe,	//message,
++                                pn_vector,
++                                num_blocks+1,
++                                frtype); // add for CONFIG_IEEE80211W, none 11w also can use
++
++        for (j = 0; j < 16; j++) padded_buffer[j] = 0x00;
++        for (j = 0; j < payload_remainder; j++)
++        {
++            padded_buffer[j] = pframe[payload_index+j];//padded_buffer[j] = message[payload_index+j];
++        }
++        aes128k128d(key, ctr_preload, aes_out);
++        bitwise_xor(aes_out, padded_buffer, chain_buffer);
++        for (j=0; j<payload_remainder;j++) pframe[payload_index++] = chain_buffer[j];//for (j=0; j<payload_remainder;j++) message[payload_index++] = chain_buffer[j];
++    }
++
++    /* Encrypt the MIC */
++    construct_ctr_preload(
++                        ctr_preload,
++                        a4_exists,
++                        qc_exists,
++                        pframe,	//message,
++                        pn_vector,
++                        0,
++                        frtype); // add for CONFIG_IEEE80211W, none 11w also can use
++
++    for (j = 0; j < 16; j++) padded_buffer[j] = 0x00;
++    for (j = 0; j < 8; j++)
++    {
++        padded_buffer[j] = pframe[j+hdrlen+8+plen];//padded_buffer[j] = message[j+hdrlen+8+plen];
++    }
++
++    aes128k128d(key, ctr_preload, aes_out);
++    bitwise_xor(aes_out, padded_buffer, chain_buffer);
++    for (j=0; j<8;j++) pframe[payload_index++] = chain_buffer[j];//for (j=0; j<8;j++) message[payload_index++] = chain_buffer[j];
++_func_exit_;		
++	return _SUCCESS;
++}
++
++
++
++
++u32	rtw_aes_encrypt(_adapter *padapter, u8 *pxmitframe)
++{	// exclude ICV
++
++
++	/*static*/ 
++//	unsigned char	message[MAX_MSG_SIZE];
++
++    	/* Intermediate Buffers */
++	sint 	curfragnum,length;
++	u32	prwskeylen;
++	u8	*pframe,*prwskey;	//, *payload,*iv
++	struct	sta_info		*stainfo=NULL;
++	struct	pkt_attrib	 *pattrib = &((struct xmit_frame *)pxmitframe)->attrib;
++	struct 	security_priv	*psecuritypriv=&padapter->securitypriv;
++	struct	xmit_priv		*pxmitpriv=&padapter->xmitpriv;
++
++//	uint	offset = 0;
++	u32 res=_SUCCESS;
++_func_enter_;		
++
++	if(((struct xmit_frame*)pxmitframe)->buf_addr==NULL)
++		return _FAIL;
++
++#ifdef CONFIG_USB_TX_AGGREGATION
++	pframe = ((struct xmit_frame*)pxmitframe)->buf_addr + TXDESC_SIZE +
++		 (((struct xmit_frame*)pxmitframe)->pkt_offset * PACKET_OFFSET_SZ);
++#else
++	pframe = ((struct xmit_frame*)pxmitframe)->buf_addr + TXDESC_OFFSET;
++#endif
++
++	//4 start to encrypt each fragment
++	if((pattrib->encrypt==_AES_)){
++
++		if(pattrib->psta)
++		{
++			stainfo = pattrib->psta;
++		}
++		else
++		{
++			DBG_871X("%s, call rtw_get_stainfo()\n", __func__);
++			stainfo=rtw_get_stainfo(&padapter->stapriv ,&pattrib->ra[0] );
++		}	
++		
++		if (stainfo!=NULL){
++
++			if(!(stainfo->state &_FW_LINKED))
++			{
++				DBG_871X("%s, psta->state(0x%x) != _FW_LINKED\n", __func__, stainfo->state);
++				return _FAIL;
++			}
++			
++			RT_TRACE(_module_rtl871x_security_c_,_drv_err_,("rtw_aes_encrypt: stainfo!=NULL!!!\n"));
++
++			if(IS_MCAST(pattrib->ra))
++			{
++				prwskey=psecuritypriv->dot118021XGrpKey[psecuritypriv->dot118021XGrpKeyid].skey;
++			}
++			else
++			{
++				prwskey=&stainfo->dot118021x_UncstKey.skey[0];
++			}
++
++#ifdef CONFIG_TDLS	//swencryption
++			{
++				struct	sta_info		*ptdls_sta;
++				ptdls_sta=rtw_get_stainfo(&padapter->stapriv ,&pattrib->dst[0] );
++				if((ptdls_sta != NULL) && (ptdls_sta->tdls_sta_state & TDLS_LINKED_STATE) )
++				{
++					DBG_871X("[%s] for tdls link\n", __FUNCTION__);
++					prwskey=&ptdls_sta->tpk.tk[0];
++				}
++			}
++#endif //CONFIG_TDLS
++
++			prwskeylen=16;
++	
++			for(curfragnum=0;curfragnum<pattrib->nr_frags;curfragnum++){
++			
++				if((curfragnum+1)==pattrib->nr_frags){	//4 the last fragment
++					length=pattrib->last_txcmdsz-pattrib->hdrlen-pattrib->iv_len- pattrib->icv_len;
++				
++					aes_cipher(prwskey,pattrib->hdrlen,pframe, length);
++				}
++				else{
++					length=pxmitpriv->frag_len-pattrib->hdrlen-pattrib->iv_len-pattrib->icv_len ;
++				
++					aes_cipher(prwskey,pattrib->hdrlen,pframe, length);
++				pframe+=pxmitpriv->frag_len;
++				pframe=(u8*)RND4((SIZE_PTR)(pframe));
++
++				}
++			}
++
++
++		}
++		else{
++			RT_TRACE(_module_rtl871x_security_c_,_drv_err_,("rtw_aes_encrypt: stainfo==NULL!!!\n"));
++                        DBG_871X("%s, psta==NUL\n", __func__);
++			res=_FAIL;
++		}
++						
++	}
++
++
++
++_func_exit_;
++		return res;
++}
++
++static sint aes_decipher(u8 *key, uint	hdrlen,
++			u8 *pframe, uint plen)
++{
++	static u8	message[MAX_MSG_SIZE];
++	uint	qc_exists, a4_exists, i, j, payload_remainder,
++			num_blocks, payload_index;
++	sint res = _SUCCESS;
++	u8 pn_vector[6];
++	u8 mic_iv[16];
++	u8 mic_header1[16];
++	u8 mic_header2[16];
++	u8 ctr_preload[16];
++
++    /* Intermediate Buffers */
++	u8 chain_buffer[16];
++	u8 aes_out[16];
++	u8 padded_buffer[16];
++	u8 mic[8];
++
++
++//	uint	offset = 0;
++	uint	frtype  = GetFrameType(pframe);
++	uint	frsubtype  = GetFrameSubType(pframe);
++_func_enter_;			
++	frsubtype=frsubtype>>4;
++
++
++	_rtw_memset((void *)mic_iv, 0, 16);
++	_rtw_memset((void *)mic_header1, 0, 16);
++	_rtw_memset((void *)mic_header2, 0, 16);
++	_rtw_memset((void *)ctr_preload, 0, 16);
++	_rtw_memset((void *)chain_buffer, 0, 16);
++	_rtw_memset((void *)aes_out, 0, 16);
++	_rtw_memset((void *)padded_buffer, 0, 16);
++
++	//start to decrypt the payload
++
++	num_blocks = (plen-8) / 16; //(plen including LLC, payload_length and mic )
++
++	payload_remainder = (plen-8) % 16;
++
++	pn_vector[0]  = pframe[hdrlen];
++	pn_vector[1]  = pframe[hdrlen+1];
++	pn_vector[2]  = pframe[hdrlen+4];
++	pn_vector[3]  = pframe[hdrlen+5];
++	pn_vector[4]  = pframe[hdrlen+6];
++	pn_vector[5]  = pframe[hdrlen+7];
++
++	if ((hdrlen == WLAN_HDR_A3_LEN )||(hdrlen ==  WLAN_HDR_A3_QOS_LEN))
++		a4_exists = 0;
++	else
++		a4_exists = 1;
++
++	if (
++		((frtype|frsubtype) == WIFI_DATA_CFACK) ||
++		((frtype|frsubtype) == WIFI_DATA_CFPOLL)||
++		((frtype|frsubtype) == WIFI_DATA_CFACKPOLL))
++		{
++			qc_exists = 1;
++					if(hdrlen !=  WLAN_HDR_A3_QOS_LEN){
++				 
++					hdrlen += 2;
++			}
++		}//only for data packet . add for CONFIG_IEEE80211W, none 11w also can use
++	else if ((frtype == WIFI_DATA) &&
++		((frsubtype == 0x08) ||
++		(frsubtype == 0x09)||
++		(frsubtype == 0x0a)||
++		(frsubtype == 0x0b)))
++		{
++			if(hdrlen !=  WLAN_HDR_A3_QOS_LEN){
++				 
++					hdrlen += 2;
++			}
++			qc_exists = 1;
++		}
++	else
++		qc_exists = 0;
++
++
++	// now, decrypt pframe with hdrlen offset and plen long
++
++	payload_index = hdrlen + 8; // 8 is for extiv
++	
++	for (i=0; i< num_blocks; i++)
++    {
++        construct_ctr_preload(
++                                ctr_preload,
++                                a4_exists,
++                                qc_exists,
++                                pframe,
++                                pn_vector,
++                                i+1,
++                                frtype // add for CONFIG_IEEE80211W, none 11w also can use
++                            );
++
++        aes128k128d(key, ctr_preload, aes_out);
++        bitwise_xor(aes_out, &pframe[payload_index], chain_buffer);
++
++        for (j=0; j<16;j++) pframe[payload_index++] = chain_buffer[j];
++    }
++
++    if (payload_remainder > 0)          /* If there is a short final block, then pad it,*/
++    {                                   /* encrypt it and copy the unpadded part back   */
++        construct_ctr_preload(
++                                ctr_preload,
++                                a4_exists,
++                                qc_exists,
++                                pframe,
++                                pn_vector,
++                                num_blocks+1,
++                                frtype // add for CONFIG_IEEE80211W, none 11w also can use
++                            );
++
++        for (j = 0; j < 16; j++) padded_buffer[j] = 0x00;
++        for (j = 0; j < payload_remainder; j++)
++        {
++            padded_buffer[j] = pframe[payload_index+j];
++        }
++        aes128k128d(key, ctr_preload, aes_out);
++        bitwise_xor(aes_out, padded_buffer, chain_buffer);
++        for (j=0; j<payload_remainder;j++) pframe[payload_index++] = chain_buffer[j];
++    }
++
++	//start to calculate the mic	
++
++	_rtw_memcpy((void *)message, pframe, (hdrlen +plen+8)); //8 is for ext iv len
++
++
++	pn_vector[0]=pframe[hdrlen];
++	pn_vector[1]=pframe[hdrlen+1];
++	pn_vector[2]=pframe[hdrlen+4];
++	pn_vector[3]=pframe[hdrlen+5];
++	pn_vector[4]=pframe[hdrlen+6];
++	pn_vector[5]=pframe[hdrlen+7];
++
++
++	
++	construct_mic_iv(
++                        mic_iv,
++                        qc_exists,
++                        a4_exists,
++                        message,
++                        plen-8,
++                        pn_vector,
++                        frtype // add for CONFIG_IEEE80211W, none 11w also can use
++                        );
++
++    construct_mic_header1(
++                            mic_header1,
++                            hdrlen,
++                            message,
++                            frtype // add for CONFIG_IEEE80211W, none 11w also can use
++                            );
++    construct_mic_header2(
++                            mic_header2,
++                            message,
++                            a4_exists,
++                            qc_exists
++                            );
++
++
++	payload_remainder = (plen-8) % 16;
++    num_blocks = (plen-8) / 16;
++
++    /* Find start of payload */
++    payload_index = (hdrlen + 8);
++
++    /* Calculate MIC */
++    aes128k128d(key, mic_iv, aes_out);
++    bitwise_xor(aes_out, mic_header1, chain_buffer);
++    aes128k128d(key, chain_buffer, aes_out);
++    bitwise_xor(aes_out, mic_header2, chain_buffer);
++    aes128k128d(key, chain_buffer, aes_out);
++
++	for (i = 0; i < num_blocks; i++)
++    {
++        bitwise_xor(aes_out, &message[payload_index], chain_buffer);
++
++        payload_index += 16;
++        aes128k128d(key, chain_buffer, aes_out);
++    }
++
++    /* Add on the final payload block if it needs padding */
++    if (payload_remainder > 0)
++    {
++        for (j = 0; j < 16; j++) padded_buffer[j] = 0x00;
++        for (j = 0; j < payload_remainder; j++)
++        {
++            padded_buffer[j] = message[payload_index++];
++        }
++        bitwise_xor(aes_out, padded_buffer, chain_buffer);
++        aes128k128d(key, chain_buffer, aes_out);
++
++    }
++
++    for (j = 0 ; j < 8; j++) mic[j] = aes_out[j];
++
++    /* Insert MIC into payload */
++    for (j = 0; j < 8; j++)
++    	message[payload_index+j] = mic[j];
++
++	payload_index = hdrlen + 8;
++	for (i=0; i< num_blocks; i++)
++    {
++        construct_ctr_preload(
++                                ctr_preload,
++                                a4_exists,
++                                qc_exists,
++                                message,
++                                pn_vector,
++                                i+1,
++                                frtype); // add for CONFIG_IEEE80211W, none 11w also can use
++        aes128k128d(key, ctr_preload, aes_out);
++        bitwise_xor(aes_out, &message[payload_index], chain_buffer);
++        for (j=0; j<16;j++) message[payload_index++] = chain_buffer[j];
++    }
++
++    if (payload_remainder > 0)          /* If there is a short final block, then pad it,*/
++    {                                   /* encrypt it and copy the unpadded part back   */
++        construct_ctr_preload(
++                                ctr_preload,
++                                a4_exists,
++                                qc_exists,
++                                message,
++                                pn_vector,
++                                num_blocks+1,
++                                frtype); // add for CONFIG_IEEE80211W, none 11w also can use
++
++        for (j = 0; j < 16; j++) padded_buffer[j] = 0x00;
++        for (j = 0; j < payload_remainder; j++)
++        {
++            padded_buffer[j] = message[payload_index+j];
++        }
++        aes128k128d(key, ctr_preload, aes_out);
++        bitwise_xor(aes_out, padded_buffer, chain_buffer);
++        for (j=0; j<payload_remainder;j++) message[payload_index++] = chain_buffer[j];
++    }
++
++    /* Encrypt the MIC */
++    construct_ctr_preload(
++                        ctr_preload,
++                        a4_exists,
++                        qc_exists,
++                        message,
++                        pn_vector,
++                        0,
++                        frtype); // add for CONFIG_IEEE80211W, none 11w also can use
++
++    for (j = 0; j < 16; j++) padded_buffer[j] = 0x00;
++    for (j = 0; j < 8; j++)
++    {
++        padded_buffer[j] = message[j+hdrlen+8+plen-8];
++    }
++
++    aes128k128d(key, ctr_preload, aes_out);
++    bitwise_xor(aes_out, padded_buffer, chain_buffer);
++    for (j=0; j<8;j++) message[payload_index++] = chain_buffer[j];
++
++	//compare the mic
++	for(i=0;i<8;i++){
++		if(pframe[hdrlen+8+plen-8+i] != message[hdrlen+8+plen-8+i])
++		{
++			RT_TRACE(_module_rtl871x_security_c_,_drv_err_,("aes_decipher:mic check error mic[%d]: pframe(%x) != message(%x) \n",
++						i,pframe[hdrlen+8+plen-8+i],message[hdrlen+8+plen-8+i]));
++			DBG_871X("aes_decipher:mic check error mic[%d]: pframe(%x) != message(%x) \n",
++						i,pframe[hdrlen+8+plen-8+i],message[hdrlen+8+plen-8+i]);
++			res = _FAIL;
++		}
++	}
++
++	if(res == _FAIL)
++	{
++		int gg=0;
++		for(gg=0; gg < 32; gg++)
++			DBG_871X(" [%d]=%02x ", gg, pframe[gg]);
++		DBG_871X("error packet header \n");
++	}
++
++_func_exit_;	
++	return res;
++}
++
++u32	rtw_aes_decrypt(_adapter *padapter, u8 *precvframe)
++{	// exclude ICV
++
++
++	/*static*/ 
++//	unsigned char	message[MAX_MSG_SIZE];
++
++
++    	/* Intermediate Buffers */
++
++
++	sint 		length;
++	u8	*pframe,*prwskey;	//, *payload,*iv
++	struct	sta_info		*stainfo;
++	struct	rx_pkt_attrib	 *prxattrib = &((union recv_frame *)precvframe)->u.hdr.attrib;
++	struct 	security_priv	*psecuritypriv=&padapter->securitypriv;
++//	struct	recv_priv		*precvpriv=&padapter->recvpriv;
++	u32	res=_SUCCESS;
++_func_enter_;	 
++	pframe=(unsigned char *)((union recv_frame*)precvframe)->u.hdr.rx_data;
++	//4 start to encrypt each fragment
++	if((prxattrib->encrypt==_AES_)){
++
++		stainfo=rtw_get_stainfo(&padapter->stapriv ,&prxattrib->ta[0] );
++		if (stainfo!=NULL){
++			RT_TRACE(_module_rtl871x_security_c_,_drv_err_,("rtw_aes_decrypt: stainfo!=NULL!!!\n"));
++
++			if(IS_MCAST(prxattrib->ra))
++			{
++				//in concurrent we should use sw descrypt in group key, so we remove this message			
++				//DBG_871X("rx bc/mc packets, to perform sw rtw_aes_decrypt\n");
++				//prwskey = psecuritypriv->dot118021XGrpKey[psecuritypriv->dot118021XGrpKeyid].skey;
++				if(psecuritypriv->binstallGrpkey==_FALSE)
++				{
++					res=_FAIL;				
++					DBG_8192C("%s:rx bc/mc packets,but didn't install group key!!!!!!!!!!\n",__FUNCTION__);
++					goto exit;
++				}
++				prwskey = psecuritypriv->dot118021XGrpKey[prxattrib->key_index].skey;
++
++				if(psecuritypriv->dot118021XGrpKeyid != prxattrib->key_index)
++				{
++					DBG_871X("not match packet_index=%d, install_index=%d \n"
++					, prxattrib->key_index, psecuritypriv->dot118021XGrpKeyid);
++					res=_FAIL;
++					goto exit;
++				}
++			}
++			else
++			{
++				prwskey=&stainfo->dot118021x_UncstKey.skey[0];
++			}
++	
++			length= ((union recv_frame *)precvframe)->u.hdr.len-prxattrib->hdrlen-prxattrib->iv_len;
++			/*// add for CONFIG_IEEE80211W, debug
++			if(0)
++			printk("@@@@@@@@@@@@@@@@@@ length=%d, prxattrib->hdrlen=%d, prxattrib->pkt_len=%d \n"
++			, length, prxattrib->hdrlen, prxattrib->pkt_len);
++			if(0)
++			{
++				int no;
++				//test print PSK
++				printk("PSK key below:\n");
++				for(no=0;no<16;no++)
++					printk(" %02x ", prwskey[no]);
++				printk("\n");
++			}
++			if(0)
++			{
++				int no;
++				//test print PSK
++				printk("frame:\n");
++				for(no=0;no<prxattrib->pkt_len;no++)
++					printk(" %02x ", pframe[no]);
++				printk("\n");
++			}*/
++
++			res= aes_decipher(prwskey,prxattrib->hdrlen,pframe, length);
++		}
++		else{
++			RT_TRACE(_module_rtl871x_security_c_,_drv_err_,("rtw_aes_encrypt: stainfo==NULL!!!\n"));
++			res=_FAIL;
++		}
++						
++	}
++_func_exit_;	
++exit:
++	return res;
++}
++
++#ifdef CONFIG_IEEE80211W
++u32	rtw_BIP_verify(_adapter *padapter, u8 *precvframe)
++{
++	struct rx_pkt_attrib *pattrib = &((union recv_frame *)precvframe)->u.hdr.attrib;
++	u8 *pframe;
++	u8 *BIP_AAD, *p;
++	u32	res=_FAIL;
++	uint len, ori_len;
++	struct rtw_ieee80211_hdr *pwlanhdr;
++	u8 mic[16];
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	ori_len = pattrib->pkt_len-WLAN_HDR_A3_LEN+BIP_AAD_SIZE;
++	BIP_AAD = rtw_zmalloc(ori_len);
++	
++	if(BIP_AAD == NULL)
++	{
++		DBG_871X("BIP AAD allocate fail\n");
++		return _FAIL;
++	}
++	//PKT start
++	pframe=(unsigned char *)((union recv_frame*)precvframe)->u.hdr.rx_data;
++	//mapping to wlan header
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++	//save the frame body + MME
++	_rtw_memcpy(BIP_AAD+BIP_AAD_SIZE, pframe+WLAN_HDR_A3_LEN, pattrib->pkt_len-WLAN_HDR_A3_LEN);
++	//find MME IE pointer
++	p = rtw_get_ie(BIP_AAD+BIP_AAD_SIZE, _MME_IE_, &len, pattrib->pkt_len-WLAN_HDR_A3_LEN);
++	//Baron
++	if(p)
++	{
++		u16 keyid=0;
++		u64 temp_ipn=0;
++		//save packet number
++		_rtw_memcpy(&temp_ipn, p+4, 6);
++		temp_ipn = le64_to_cpu(temp_ipn);
++		//BIP packet number should bigger than previous BIP packet
++		if(temp_ipn <= pmlmeext->mgnt_80211w_IPN_rx)
++		{
++			DBG_871X("replay BIP packet\n");
++			goto BIP_exit;
++		}
++		//copy key index
++		_rtw_memcpy(&keyid, p+2, 2);
++		keyid = le16_to_cpu(keyid);
++		if(keyid != padapter->securitypriv.dot11wBIPKeyid)
++		{
++			DBG_871X("BIP key index error!\n");
++			goto BIP_exit;
++		}
++		//clear the MIC field of MME to zero
++		_rtw_memset(p+2+len-8, 0, 8);
++		
++		//conscruct AAD, copy frame control field
++		_rtw_memcpy(BIP_AAD, &pwlanhdr->frame_ctl, 2);
++		ClearRetry(BIP_AAD);
++		ClearPwrMgt(BIP_AAD);
++		ClearMData(BIP_AAD);
++		//conscruct AAD, copy address 1 to address 3
++		_rtw_memcpy(BIP_AAD+2, pwlanhdr->addr1, 18);
++		
++		if(omac1_aes_128(padapter->securitypriv.dot11wBIPKey[padapter->securitypriv.dot11wBIPKeyid].skey
++			, BIP_AAD, ori_len, mic))
++			goto BIP_exit;
++		
++		/*//management packet content
++		{
++			int pp;
++			DBG_871X("pkt: ");
++			for(pp=0;pp< pattrib->pkt_len; pp++)
++				printk(" %02x ", pframe[pp]);
++			DBG_871X("\n");
++			//BIP AAD + management frame body + MME(MIC is zero)
++			DBG_871X("AAD+PKT: ");
++			for(pp=0;pp< ori_len; pp++)
++				DBG_871X(" %02x ", BIP_AAD[pp]);
++			DBG_871X("\n");
++			//show the MIC result
++			DBG_871X("mic: ");
++			for(pp=0;pp<16; pp++)
++				DBG_871X(" %02x ", mic[pp]);
++			DBG_871X("\n");
++		}
++		*/
++		//MIC field should be last 8 bytes of packet (packet without FCS)
++		if(_rtw_memcmp(mic, pframe+pattrib->pkt_len-8, 8))
++		{
++			pmlmeext->mgnt_80211w_IPN_rx = temp_ipn;
++			res=_SUCCESS;
++		}
++		else
++			DBG_871X("BIP MIC error!\n");
++		
++	}
++	else
++		res = RTW_RX_HANDLED;
++BIP_exit:
++
++	rtw_mfree(BIP_AAD, ori_len);
++	return res;
++}
++#endif //CONFIG_IEEE80211W
++
++#ifndef PLATFORM_FREEBSD
++/* compress 512-bits */
++static int sha256_compress(struct sha256_state *md, unsigned char *buf)
++{
++	u32 S[8], W[64], t0, t1;
++	u32 t;
++	int i;
++
++	/* copy state into S */
++	for (i = 0; i < 8; i++) {
++		S[i] = md->state[i];
++	}
++
++	/* copy the state into 512-bits into W[0..15] */
++	for (i = 0; i < 16; i++)
++		W[i] = WPA_GET_BE32(buf + (4 * i));
++
++	/* fill W[16..63] */
++	for (i = 16; i < 64; i++) {
++		W[i] = Gamma1(W[i - 2]) + W[i - 7] + Gamma0(W[i - 15]) +
++			W[i - 16];
++	}        
++
++	/* Compress */
++#define RND(a,b,c,d,e,f,g,h,i)                          \
++	t0 = h + Sigma1(e) + Ch(e, f, g) + K[i] + W[i];	\
++	t1 = Sigma0(a) + Maj(a, b, c);			\
++	d += t0;					\
++	h  = t0 + t1;
++
++	for (i = 0; i < 64; ++i) {
++		RND(S[0], S[1], S[2], S[3], S[4], S[5], S[6], S[7], i);
++		t = S[7]; S[7] = S[6]; S[6] = S[5]; S[5] = S[4]; 
++		S[4] = S[3]; S[3] = S[2]; S[2] = S[1]; S[1] = S[0]; S[0] = t;
++	}
++
++	/* feedback */
++	for (i = 0; i < 8; i++) {
++		md->state[i] = md->state[i] + S[i];
++	}
++	return 0;
++}
++
++/* Initialize the hash state */
++static void sha256_init(struct sha256_state *md)
++{
++	md->curlen = 0;
++	md->length = 0;
++	md->state[0] = 0x6A09E667UL;
++	md->state[1] = 0xBB67AE85UL;
++	md->state[2] = 0x3C6EF372UL;
++	md->state[3] = 0xA54FF53AUL;
++	md->state[4] = 0x510E527FUL;
++	md->state[5] = 0x9B05688CUL;
++	md->state[6] = 0x1F83D9ABUL;
++	md->state[7] = 0x5BE0CD19UL;
++}
++
++/**
++   Process a block of memory though the hash
++   @param md     The hash state
++   @param in     The data to hash
++   @param inlen  The length of the data (octets)
++   @return CRYPT_OK if successful
++*/
++static int sha256_process(struct sha256_state *md, unsigned char *in,
++			  unsigned long inlen)
++{
++	unsigned long n;
++#define block_size 64
++
++	if (md->curlen > sizeof(md->buf))
++		return -1;
++
++	while (inlen > 0) {
++		if (md->curlen == 0 && inlen >= block_size) {
++			if (sha256_compress(md, (unsigned char *) in) < 0)
++				return -1;
++			md->length += block_size * 8;
++			in += block_size;
++			inlen -= block_size;
++		} else {
++			n = MIN(inlen, (block_size - md->curlen));
++			_rtw_memcpy(md->buf + md->curlen, in, n);
++			md->curlen += n;
++			in += n;
++			inlen -= n;
++			if (md->curlen == block_size) {
++				if (sha256_compress(md, md->buf) < 0)
++					return -1;
++				md->length += 8 * block_size;
++				md->curlen = 0;
++			}
++		}
++	}
++
++	return 0;
++}
++
++
++/**
++   Terminate the hash to get the digest
++   @param md  The hash state
++   @param out [out] The destination of the hash (32 bytes)
++   @return CRYPT_OK if successful
++*/
++static int sha256_done(struct sha256_state *md, unsigned char *out)
++{
++	int i;
++
++	if (md->curlen >= sizeof(md->buf))
++		return -1;
++
++	/* increase the length of the message */
++	md->length += md->curlen * 8;
++
++	/* append the '1' bit */
++	md->buf[md->curlen++] = (unsigned char) 0x80;
++
++	/* if the length is currently above 56 bytes we append zeros
++	 * then compress.  Then we can fall back to padding zeros and length
++	 * encoding like normal.
++	 */
++	if (md->curlen > 56) {
++		while (md->curlen < 64) {
++			md->buf[md->curlen++] = (unsigned char) 0;
++		}
++		sha256_compress(md, md->buf);
++		md->curlen = 0;
++	}
++
++	/* pad upto 56 bytes of zeroes */
++	while (md->curlen < 56) {
++		md->buf[md->curlen++] = (unsigned char) 0;
++	}
++
++	/* store length */
++	WPA_PUT_BE64(md->buf + 56, md->length);
++	sha256_compress(md, md->buf);
++
++	/* copy output */
++	for (i = 0; i < 8; i++)
++		WPA_PUT_BE32(out + (4 * i), md->state[i]);
++
++	return 0;
++}
++
++/**
++ * sha256_vector - SHA256 hash for data vector
++ * @num_elem: Number of elements in the data vector
++ * @addr: Pointers to the data areas
++ * @len: Lengths of the data blocks
++ * @mac: Buffer for the hash
++ * Returns: 0 on success, -1 of failure
++ */
++static int sha256_vector(size_t num_elem, u8 *addr[], size_t *len,
++		  u8 *mac)
++{
++	struct sha256_state ctx;
++	size_t i;
++
++	sha256_init(&ctx);
++	for (i = 0; i < num_elem; i++)
++		if (sha256_process(&ctx, addr[i], len[i]))
++			return -1;
++	if (sha256_done(&ctx, mac))
++		return -1;
++	return 0;
++}
++
++static u8 os_strlen(const char *s)
++{
++	const char *p = s;
++	while (*p)
++		p++;
++	return p - s;
++}
++
++static int os_memcmp(void *s1, void *s2, u8 n)
++{
++	unsigned char *p1 = s1, *p2 = s2;
++
++	if (n == 0)
++		return 0;
++
++	while (*p1 == *p2) {
++		p1++;
++		p2++;
++		n--;
++		if (n == 0)
++			return 0;
++	}
++
++	return *p1 - *p2;
++}
++
++/**
++ * hmac_sha256_vector - HMAC-SHA256 over data vector (RFC 2104)
++ * @key: Key for HMAC operations
++ * @key_len: Length of the key in bytes
++ * @num_elem: Number of elements in the data vector
++ * @addr: Pointers to the data areas
++ * @len: Lengths of the data blocks
++ * @mac: Buffer for the hash (32 bytes)
++ */
++static void hmac_sha256_vector(u8 *key, size_t key_len, size_t num_elem,
++			u8 *addr[], size_t *len, u8 *mac)
++{
++	unsigned char k_pad[64]; /* padding - key XORd with ipad/opad */
++	unsigned char tk[32];
++	u8 *_addr[6];
++	size_t _len[6], i;
++
++	if (num_elem > 5) {
++		/*
++		 * Fixed limit on the number of fragments to avoid having to
++		 * allocate memory (which could fail).
++		 */
++		return;
++	}
++
++        /* if key is longer than 64 bytes reset it to key = SHA256(key) */
++        if (key_len > 64) {
++		sha256_vector(1, &key, &key_len, tk);
++		key = tk;
++		key_len = 32;
++        }
++
++	/* the HMAC_SHA256 transform looks like:
++	 *
++	 * SHA256(K XOR opad, SHA256(K XOR ipad, text))
++	 *
++	 * where K is an n byte key
++	 * ipad is the byte 0x36 repeated 64 times
++	 * opad is the byte 0x5c repeated 64 times
++	 * and text is the data being protected */
++
++	/* start out by storing key in ipad */
++	_rtw_memset(k_pad, 0, sizeof(k_pad));
++	_rtw_memcpy(k_pad, key, key_len);
++	/* XOR key with ipad values */
++	for (i = 0; i < 64; i++)
++		k_pad[i] ^= 0x36;
++
++	/* perform inner SHA256 */
++	_addr[0] = k_pad;
++	_len[0] = 64;
++	for (i = 0; i < num_elem; i++) {
++		_addr[i + 1] = addr[i];
++		_len[i + 1] = len[i];
++	}
++	sha256_vector(1 + num_elem, _addr, _len, mac);
++
++	_rtw_memset(k_pad, 0, sizeof(k_pad));
++	_rtw_memcpy(k_pad, key, key_len);
++	/* XOR key with opad values */
++	for (i = 0; i < 64; i++)
++		k_pad[i] ^= 0x5c;
++
++	/* perform outer SHA256 */
++	_addr[0] = k_pad;
++	_len[0] = 64;
++	_addr[1] = mac;
++	_len[1] = 32;
++	sha256_vector(2, _addr, _len, mac);
++}
++#endif //PLATFORM_FREEBSD
++/**
++ * sha256_prf - SHA256-based Pseudo-Random Function (IEEE 802.11r, 8.5.1.5.2)
++ * @key: Key for PRF
++ * @key_len: Length of the key in bytes
++ * @label: A unique label for each purpose of the PRF
++ * @data: Extra data to bind into the key
++ * @data_len: Length of the data
++ * @buf: Buffer for the generated pseudo-random key
++ * @buf_len: Number of bytes of key to generate
++ *
++ * This function is used to derive new, cryptographically separate keys from a
++ * given key.
++ */
++#ifndef PLATFORM_FREEBSD //Baron
++static void sha256_prf(u8 *key, size_t key_len, char *label,
++		u8 *data, size_t data_len, u8 *buf, size_t buf_len)
++{
++	u16 counter = 1;
++	size_t pos, plen;
++	u8 hash[SHA256_MAC_LEN];
++	u8 *addr[4];
++	size_t len[4];
++	u8 counter_le[2], length_le[2];
++
++	addr[0] = counter_le;
++	len[0] = 2;
++	addr[1] = (u8 *) label;
++	len[1] = os_strlen(label);
++	addr[2] = data;
++	len[2] = data_len;
++	addr[3] = length_le;
++	len[3] = sizeof(length_le);
++
++	WPA_PUT_LE16(length_le, buf_len * 8);
++	pos = 0;
++	while (pos < buf_len) {
++		plen = buf_len - pos;
++		WPA_PUT_LE16(counter_le, counter);
++		if (plen >= SHA256_MAC_LEN) {
++			hmac_sha256_vector(key, key_len, 4, addr, len,
++					   &buf[pos]);
++			pos += SHA256_MAC_LEN;
++		} else {
++			hmac_sha256_vector(key, key_len, 4, addr, len, hash);
++			_rtw_memcpy(&buf[pos], hash, plen);
++			break;
++		}
++		counter++;
++	}
++}
++#endif //PLATFORM_FREEBSD Baron
++
++/* AES tables*/
++const u32 Te0[256] = {
++    0xc66363a5U, 0xf87c7c84U, 0xee777799U, 0xf67b7b8dU,
++    0xfff2f20dU, 0xd66b6bbdU, 0xde6f6fb1U, 0x91c5c554U,
++    0x60303050U, 0x02010103U, 0xce6767a9U, 0x562b2b7dU,
++    0xe7fefe19U, 0xb5d7d762U, 0x4dababe6U, 0xec76769aU,
++    0x8fcaca45U, 0x1f82829dU, 0x89c9c940U, 0xfa7d7d87U,
++    0xeffafa15U, 0xb25959ebU, 0x8e4747c9U, 0xfbf0f00bU,
++    0x41adadecU, 0xb3d4d467U, 0x5fa2a2fdU, 0x45afafeaU,
++    0x239c9cbfU, 0x53a4a4f7U, 0xe4727296U, 0x9bc0c05bU,
++    0x75b7b7c2U, 0xe1fdfd1cU, 0x3d9393aeU, 0x4c26266aU,
++    0x6c36365aU, 0x7e3f3f41U, 0xf5f7f702U, 0x83cccc4fU,
++    0x6834345cU, 0x51a5a5f4U, 0xd1e5e534U, 0xf9f1f108U,
++    0xe2717193U, 0xabd8d873U, 0x62313153U, 0x2a15153fU,
++    0x0804040cU, 0x95c7c752U, 0x46232365U, 0x9dc3c35eU,
++    0x30181828U, 0x379696a1U, 0x0a05050fU, 0x2f9a9ab5U,
++    0x0e070709U, 0x24121236U, 0x1b80809bU, 0xdfe2e23dU,
++    0xcdebeb26U, 0x4e272769U, 0x7fb2b2cdU, 0xea75759fU,
++    0x1209091bU, 0x1d83839eU, 0x582c2c74U, 0x341a1a2eU,
++    0x361b1b2dU, 0xdc6e6eb2U, 0xb45a5aeeU, 0x5ba0a0fbU,
++    0xa45252f6U, 0x763b3b4dU, 0xb7d6d661U, 0x7db3b3ceU,
++    0x5229297bU, 0xdde3e33eU, 0x5e2f2f71U, 0x13848497U,
++    0xa65353f5U, 0xb9d1d168U, 0x00000000U, 0xc1eded2cU,
++    0x40202060U, 0xe3fcfc1fU, 0x79b1b1c8U, 0xb65b5bedU,
++    0xd46a6abeU, 0x8dcbcb46U, 0x67bebed9U, 0x7239394bU,
++    0x944a4adeU, 0x984c4cd4U, 0xb05858e8U, 0x85cfcf4aU,
++    0xbbd0d06bU, 0xc5efef2aU, 0x4faaaae5U, 0xedfbfb16U,
++    0x864343c5U, 0x9a4d4dd7U, 0x66333355U, 0x11858594U,
++    0x8a4545cfU, 0xe9f9f910U, 0x04020206U, 0xfe7f7f81U,
++    0xa05050f0U, 0x783c3c44U, 0x259f9fbaU, 0x4ba8a8e3U,
++    0xa25151f3U, 0x5da3a3feU, 0x804040c0U, 0x058f8f8aU,
++    0x3f9292adU, 0x219d9dbcU, 0x70383848U, 0xf1f5f504U,
++    0x63bcbcdfU, 0x77b6b6c1U, 0xafdada75U, 0x42212163U,
++    0x20101030U, 0xe5ffff1aU, 0xfdf3f30eU, 0xbfd2d26dU,
++    0x81cdcd4cU, 0x180c0c14U, 0x26131335U, 0xc3ecec2fU,
++    0xbe5f5fe1U, 0x359797a2U, 0x884444ccU, 0x2e171739U,
++    0x93c4c457U, 0x55a7a7f2U, 0xfc7e7e82U, 0x7a3d3d47U,
++    0xc86464acU, 0xba5d5de7U, 0x3219192bU, 0xe6737395U,
++    0xc06060a0U, 0x19818198U, 0x9e4f4fd1U, 0xa3dcdc7fU,
++    0x44222266U, 0x542a2a7eU, 0x3b9090abU, 0x0b888883U,
++    0x8c4646caU, 0xc7eeee29U, 0x6bb8b8d3U, 0x2814143cU,
++    0xa7dede79U, 0xbc5e5ee2U, 0x160b0b1dU, 0xaddbdb76U,
++    0xdbe0e03bU, 0x64323256U, 0x743a3a4eU, 0x140a0a1eU,
++    0x924949dbU, 0x0c06060aU, 0x4824246cU, 0xb85c5ce4U,
++    0x9fc2c25dU, 0xbdd3d36eU, 0x43acacefU, 0xc46262a6U,
++    0x399191a8U, 0x319595a4U, 0xd3e4e437U, 0xf279798bU,
++    0xd5e7e732U, 0x8bc8c843U, 0x6e373759U, 0xda6d6db7U,
++    0x018d8d8cU, 0xb1d5d564U, 0x9c4e4ed2U, 0x49a9a9e0U,
++    0xd86c6cb4U, 0xac5656faU, 0xf3f4f407U, 0xcfeaea25U,
++    0xca6565afU, 0xf47a7a8eU, 0x47aeaee9U, 0x10080818U,
++    0x6fbabad5U, 0xf0787888U, 0x4a25256fU, 0x5c2e2e72U,
++    0x381c1c24U, 0x57a6a6f1U, 0x73b4b4c7U, 0x97c6c651U,
++    0xcbe8e823U, 0xa1dddd7cU, 0xe874749cU, 0x3e1f1f21U,
++    0x964b4bddU, 0x61bdbddcU, 0x0d8b8b86U, 0x0f8a8a85U,
++    0xe0707090U, 0x7c3e3e42U, 0x71b5b5c4U, 0xcc6666aaU,
++    0x904848d8U, 0x06030305U, 0xf7f6f601U, 0x1c0e0e12U,
++    0xc26161a3U, 0x6a35355fU, 0xae5757f9U, 0x69b9b9d0U,
++    0x17868691U, 0x99c1c158U, 0x3a1d1d27U, 0x279e9eb9U,
++    0xd9e1e138U, 0xebf8f813U, 0x2b9898b3U, 0x22111133U,
++    0xd26969bbU, 0xa9d9d970U, 0x078e8e89U, 0x339494a7U,
++    0x2d9b9bb6U, 0x3c1e1e22U, 0x15878792U, 0xc9e9e920U,
++    0x87cece49U, 0xaa5555ffU, 0x50282878U, 0xa5dfdf7aU,
++    0x038c8c8fU, 0x59a1a1f8U, 0x09898980U, 0x1a0d0d17U,
++    0x65bfbfdaU, 0xd7e6e631U, 0x844242c6U, 0xd06868b8U,
++    0x824141c3U, 0x299999b0U, 0x5a2d2d77U, 0x1e0f0f11U,
++    0x7bb0b0cbU, 0xa85454fcU, 0x6dbbbbd6U, 0x2c16163aU,
++};
++const u32 Td0[256] = {
++    0x51f4a750U, 0x7e416553U, 0x1a17a4c3U, 0x3a275e96U,
++    0x3bab6bcbU, 0x1f9d45f1U, 0xacfa58abU, 0x4be30393U,
++    0x2030fa55U, 0xad766df6U, 0x88cc7691U, 0xf5024c25U,
++    0x4fe5d7fcU, 0xc52acbd7U, 0x26354480U, 0xb562a38fU,
++    0xdeb15a49U, 0x25ba1b67U, 0x45ea0e98U, 0x5dfec0e1U,
++    0xc32f7502U, 0x814cf012U, 0x8d4697a3U, 0x6bd3f9c6U,
++    0x038f5fe7U, 0x15929c95U, 0xbf6d7aebU, 0x955259daU,
++    0xd4be832dU, 0x587421d3U, 0x49e06929U, 0x8ec9c844U,
++    0x75c2896aU, 0xf48e7978U, 0x99583e6bU, 0x27b971ddU,
++    0xbee14fb6U, 0xf088ad17U, 0xc920ac66U, 0x7dce3ab4U,
++    0x63df4a18U, 0xe51a3182U, 0x97513360U, 0x62537f45U,
++    0xb16477e0U, 0xbb6bae84U, 0xfe81a01cU, 0xf9082b94U,
++    0x70486858U, 0x8f45fd19U, 0x94de6c87U, 0x527bf8b7U,
++    0xab73d323U, 0x724b02e2U, 0xe31f8f57U, 0x6655ab2aU,
++    0xb2eb2807U, 0x2fb5c203U, 0x86c57b9aU, 0xd33708a5U,
++    0x302887f2U, 0x23bfa5b2U, 0x02036abaU, 0xed16825cU,
++    0x8acf1c2bU, 0xa779b492U, 0xf307f2f0U, 0x4e69e2a1U,
++    0x65daf4cdU, 0x0605bed5U, 0xd134621fU, 0xc4a6fe8aU,
++    0x342e539dU, 0xa2f355a0U, 0x058ae132U, 0xa4f6eb75U,
++    0x0b83ec39U, 0x4060efaaU, 0x5e719f06U, 0xbd6e1051U,
++    0x3e218af9U, 0x96dd063dU, 0xdd3e05aeU, 0x4de6bd46U,
++    0x91548db5U, 0x71c45d05U, 0x0406d46fU, 0x605015ffU,
++    0x1998fb24U, 0xd6bde997U, 0x894043ccU, 0x67d99e77U,
++    0xb0e842bdU, 0x07898b88U, 0xe7195b38U, 0x79c8eedbU,
++    0xa17c0a47U, 0x7c420fe9U, 0xf8841ec9U, 0x00000000U,
++    0x09808683U, 0x322bed48U, 0x1e1170acU, 0x6c5a724eU,
++    0xfd0efffbU, 0x0f853856U, 0x3daed51eU, 0x362d3927U,
++    0x0a0fd964U, 0x685ca621U, 0x9b5b54d1U, 0x24362e3aU,
++    0x0c0a67b1U, 0x9357e70fU, 0xb4ee96d2U, 0x1b9b919eU,
++    0x80c0c54fU, 0x61dc20a2U, 0x5a774b69U, 0x1c121a16U,
++    0xe293ba0aU, 0xc0a02ae5U, 0x3c22e043U, 0x121b171dU,
++    0x0e090d0bU, 0xf28bc7adU, 0x2db6a8b9U, 0x141ea9c8U,
++    0x57f11985U, 0xaf75074cU, 0xee99ddbbU, 0xa37f60fdU,
++    0xf701269fU, 0x5c72f5bcU, 0x44663bc5U, 0x5bfb7e34U,
++    0x8b432976U, 0xcb23c6dcU, 0xb6edfc68U, 0xb8e4f163U,
++    0xd731dccaU, 0x42638510U, 0x13972240U, 0x84c61120U,
++    0x854a247dU, 0xd2bb3df8U, 0xaef93211U, 0xc729a16dU,
++    0x1d9e2f4bU, 0xdcb230f3U, 0x0d8652ecU, 0x77c1e3d0U,
++    0x2bb3166cU, 0xa970b999U, 0x119448faU, 0x47e96422U,
++    0xa8fc8cc4U, 0xa0f03f1aU, 0x567d2cd8U, 0x223390efU,
++    0x87494ec7U, 0xd938d1c1U, 0x8ccaa2feU, 0x98d40b36U,
++    0xa6f581cfU, 0xa57ade28U, 0xdab78e26U, 0x3fadbfa4U,
++    0x2c3a9de4U, 0x5078920dU, 0x6a5fcc9bU, 0x547e4662U,
++    0xf68d13c2U, 0x90d8b8e8U, 0x2e39f75eU, 0x82c3aff5U,
++    0x9f5d80beU, 0x69d0937cU, 0x6fd52da9U, 0xcf2512b3U,
++    0xc8ac993bU, 0x10187da7U, 0xe89c636eU, 0xdb3bbb7bU,
++    0xcd267809U, 0x6e5918f4U, 0xec9ab701U, 0x834f9aa8U,
++    0xe6956e65U, 0xaaffe67eU, 0x21bccf08U, 0xef15e8e6U,
++    0xbae79bd9U, 0x4a6f36ceU, 0xea9f09d4U, 0x29b07cd6U,
++    0x31a4b2afU, 0x2a3f2331U, 0xc6a59430U, 0x35a266c0U,
++    0x744ebc37U, 0xfc82caa6U, 0xe090d0b0U, 0x33a7d815U,
++    0xf104984aU, 0x41ecdaf7U, 0x7fcd500eU, 0x1791f62fU,
++    0x764dd68dU, 0x43efb04dU, 0xccaa4d54U, 0xe49604dfU,
++    0x9ed1b5e3U, 0x4c6a881bU, 0xc12c1fb8U, 0x4665517fU,
++    0x9d5eea04U, 0x018c355dU, 0xfa877473U, 0xfb0b412eU,
++    0xb3671d5aU, 0x92dbd252U, 0xe9105633U, 0x6dd64713U,
++    0x9ad7618cU, 0x37a10c7aU, 0x59f8148eU, 0xeb133c89U,
++    0xcea927eeU, 0xb761c935U, 0xe11ce5edU, 0x7a47b13cU,
++    0x9cd2df59U, 0x55f2733fU, 0x1814ce79U, 0x73c737bfU,
++    0x53f7cdeaU, 0x5ffdaa5bU, 0xdf3d6f14U, 0x7844db86U,
++    0xcaaff381U, 0xb968c43eU, 0x3824342cU, 0xc2a3405fU,
++    0x161dc372U, 0xbce2250cU, 0x283c498bU, 0xff0d9541U,
++    0x39a80171U, 0x080cb3deU, 0xd8b4e49cU, 0x6456c190U,
++    0x7bcb8461U, 0xd532b670U, 0x486c5c74U, 0xd0b85742U,
++};
++const u8 Td4s[256] = {
++    0x52U, 0x09U, 0x6aU, 0xd5U, 0x30U, 0x36U, 0xa5U, 0x38U,
++    0xbfU, 0x40U, 0xa3U, 0x9eU, 0x81U, 0xf3U, 0xd7U, 0xfbU,
++    0x7cU, 0xe3U, 0x39U, 0x82U, 0x9bU, 0x2fU, 0xffU, 0x87U,
++    0x34U, 0x8eU, 0x43U, 0x44U, 0xc4U, 0xdeU, 0xe9U, 0xcbU,
++    0x54U, 0x7bU, 0x94U, 0x32U, 0xa6U, 0xc2U, 0x23U, 0x3dU,
++    0xeeU, 0x4cU, 0x95U, 0x0bU, 0x42U, 0xfaU, 0xc3U, 0x4eU,
++    0x08U, 0x2eU, 0xa1U, 0x66U, 0x28U, 0xd9U, 0x24U, 0xb2U,
++    0x76U, 0x5bU, 0xa2U, 0x49U, 0x6dU, 0x8bU, 0xd1U, 0x25U,
++    0x72U, 0xf8U, 0xf6U, 0x64U, 0x86U, 0x68U, 0x98U, 0x16U,
++    0xd4U, 0xa4U, 0x5cU, 0xccU, 0x5dU, 0x65U, 0xb6U, 0x92U,
++    0x6cU, 0x70U, 0x48U, 0x50U, 0xfdU, 0xedU, 0xb9U, 0xdaU,
++    0x5eU, 0x15U, 0x46U, 0x57U, 0xa7U, 0x8dU, 0x9dU, 0x84U,
++    0x90U, 0xd8U, 0xabU, 0x00U, 0x8cU, 0xbcU, 0xd3U, 0x0aU,
++    0xf7U, 0xe4U, 0x58U, 0x05U, 0xb8U, 0xb3U, 0x45U, 0x06U,
++    0xd0U, 0x2cU, 0x1eU, 0x8fU, 0xcaU, 0x3fU, 0x0fU, 0x02U,
++    0xc1U, 0xafU, 0xbdU, 0x03U, 0x01U, 0x13U, 0x8aU, 0x6bU,
++    0x3aU, 0x91U, 0x11U, 0x41U, 0x4fU, 0x67U, 0xdcU, 0xeaU,
++    0x97U, 0xf2U, 0xcfU, 0xceU, 0xf0U, 0xb4U, 0xe6U, 0x73U,
++    0x96U, 0xacU, 0x74U, 0x22U, 0xe7U, 0xadU, 0x35U, 0x85U,
++    0xe2U, 0xf9U, 0x37U, 0xe8U, 0x1cU, 0x75U, 0xdfU, 0x6eU,
++    0x47U, 0xf1U, 0x1aU, 0x71U, 0x1dU, 0x29U, 0xc5U, 0x89U,
++    0x6fU, 0xb7U, 0x62U, 0x0eU, 0xaaU, 0x18U, 0xbeU, 0x1bU,
++    0xfcU, 0x56U, 0x3eU, 0x4bU, 0xc6U, 0xd2U, 0x79U, 0x20U,
++    0x9aU, 0xdbU, 0xc0U, 0xfeU, 0x78U, 0xcdU, 0x5aU, 0xf4U,
++    0x1fU, 0xddU, 0xa8U, 0x33U, 0x88U, 0x07U, 0xc7U, 0x31U,
++    0xb1U, 0x12U, 0x10U, 0x59U, 0x27U, 0x80U, 0xecU, 0x5fU,
++    0x60U, 0x51U, 0x7fU, 0xa9U, 0x19U, 0xb5U, 0x4aU, 0x0dU,
++    0x2dU, 0xe5U, 0x7aU, 0x9fU, 0x93U, 0xc9U, 0x9cU, 0xefU,
++    0xa0U, 0xe0U, 0x3bU, 0x4dU, 0xaeU, 0x2aU, 0xf5U, 0xb0U,
++    0xc8U, 0xebU, 0xbbU, 0x3cU, 0x83U, 0x53U, 0x99U, 0x61U,
++    0x17U, 0x2bU, 0x04U, 0x7eU, 0xbaU, 0x77U, 0xd6U, 0x26U,
++    0xe1U, 0x69U, 0x14U, 0x63U, 0x55U, 0x21U, 0x0cU, 0x7dU,
++};
++const u8 rcons[] = {
++	0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x1B, 0x36
++	/* for 128-bit blocks, Rijndael never uses more than 10 rcon values */
++};
++
++/**
++ * Expand the cipher key into the encryption key schedule.
++ *
++ * @return	the number of rounds for the given cipher key size.
++ */
++#ifndef PLATFORM_FREEBSD //Baron
++static void rijndaelKeySetupEnc(u32 rk[/*44*/], const u8 cipherKey[])
++{
++	int i;
++	u32 temp;
++
++	rk[0] = GETU32(cipherKey     );
++	rk[1] = GETU32(cipherKey +  4);
++	rk[2] = GETU32(cipherKey +  8);
++	rk[3] = GETU32(cipherKey + 12);
++	for (i = 0; i < 10; i++) {
++		temp  = rk[3];
++		rk[4] = rk[0] ^
++			TE421(temp) ^ TE432(temp) ^ TE443(temp) ^ TE414(temp) ^
++			RCON(i);
++		rk[5] = rk[1] ^ rk[4];
++		rk[6] = rk[2] ^ rk[5];
++		rk[7] = rk[3] ^ rk[6];
++		rk += 4;
++	}
++}
++
++static void rijndaelEncrypt(u32 rk[/*44*/], u8 pt[16], u8 ct[16])
++{
++	u32 s0, s1, s2, s3, t0, t1, t2, t3;
++	int Nr = 10;
++#ifndef FULL_UNROLL
++	int r;
++#endif /* ?FULL_UNROLL */
++
++	/*
++	 * map byte array block to cipher state
++	 * and add initial round key:
++	 */
++	s0 = GETU32(pt     ) ^ rk[0];
++	s1 = GETU32(pt +  4) ^ rk[1];
++	s2 = GETU32(pt +  8) ^ rk[2];
++	s3 = GETU32(pt + 12) ^ rk[3];
++
++#define ROUND(i,d,s) \
++d##0 = TE0(s##0) ^ TE1(s##1) ^ TE2(s##2) ^ TE3(s##3) ^ rk[4 * i]; \
++d##1 = TE0(s##1) ^ TE1(s##2) ^ TE2(s##3) ^ TE3(s##0) ^ rk[4 * i + 1]; \
++d##2 = TE0(s##2) ^ TE1(s##3) ^ TE2(s##0) ^ TE3(s##1) ^ rk[4 * i + 2]; \
++d##3 = TE0(s##3) ^ TE1(s##0) ^ TE2(s##1) ^ TE3(s##2) ^ rk[4 * i + 3]
++
++#ifdef FULL_UNROLL
++
++	ROUND(1,t,s);
++	ROUND(2,s,t);
++	ROUND(3,t,s);
++	ROUND(4,s,t);
++	ROUND(5,t,s);
++	ROUND(6,s,t);
++	ROUND(7,t,s);
++	ROUND(8,s,t);
++	ROUND(9,t,s);
++
++	rk += Nr << 2;
++
++#else  /* !FULL_UNROLL */
++
++	/* Nr - 1 full rounds: */
++	r = Nr >> 1;
++	for (;;) {
++		ROUND(1,t,s);
++		rk += 8;
++		if (--r == 0)
++			break;
++		ROUND(0,s,t);
++	}
++
++#endif /* ?FULL_UNROLL */
++
++#undef ROUND
++
++	/*
++	 * apply last round and
++	 * map cipher state to byte array block:
++	 */
++	s0 = TE41(t0) ^ TE42(t1) ^ TE43(t2) ^ TE44(t3) ^ rk[0];
++	PUTU32(ct     , s0);
++	s1 = TE41(t1) ^ TE42(t2) ^ TE43(t3) ^ TE44(t0) ^ rk[1];
++	PUTU32(ct +  4, s1);
++	s2 = TE41(t2) ^ TE42(t3) ^ TE43(t0) ^ TE44(t1) ^ rk[2];
++	PUTU32(ct +  8, s2);
++	s3 = TE41(t3) ^ TE42(t0) ^ TE43(t1) ^ TE44(t2) ^ rk[3];
++	PUTU32(ct + 12, s3);
++}
++
++static void * aes_encrypt_init(u8 *key, size_t len)
++{
++	u32 *rk;
++	if (len != 16)
++		return NULL;
++	rk = (u32*)rtw_malloc(AES_PRIV_SIZE);
++	if (rk == NULL)
++		return NULL;
++	rijndaelKeySetupEnc(rk, key);
++	return rk;
++}
++
++static void aes_128_encrypt(void *ctx, u8 *plain, u8 *crypt)
++{
++	rijndaelEncrypt(ctx, plain, crypt);
++}
++
++
++static void gf_mulx(u8 *pad)
++{
++	int i, carry;
++
++	carry = pad[0] & 0x80;
++	for (i = 0; i < AES_BLOCK_SIZE - 1; i++)
++		pad[i] = (pad[i] << 1) | (pad[i + 1] >> 7);
++	pad[AES_BLOCK_SIZE - 1] <<= 1;
++	if (carry)
++		pad[AES_BLOCK_SIZE - 1] ^= 0x87;
++}
++
++static void aes_encrypt_deinit(void *ctx)
++{
++	_rtw_memset(ctx, 0, AES_PRIV_SIZE);
++	rtw_mfree(ctx, AES_PRIV_SIZE);
++}
++
++
++/**
++ * omac1_aes_128_vector - One-Key CBC MAC (OMAC1) hash with AES-128
++ * @key: 128-bit key for the hash operation
++ * @num_elem: Number of elements in the data vector
++ * @addr: Pointers to the data areas
++ * @len: Lengths of the data blocks
++ * @mac: Buffer for MAC (128 bits, i.e., 16 bytes)
++ * Returns: 0 on success, -1 on failure
++ *
++ * This is a mode for using block cipher (AES in this case) for authentication.
++ * OMAC1 was standardized with the name CMAC by NIST in a Special Publication
++ * (SP) 800-38B.
++ */
++static int omac1_aes_128_vector(u8 *key, size_t num_elem,
++							 u8 *addr[], size_t *len, u8 *mac)
++{
++	void *ctx;
++	u8 cbc[AES_BLOCK_SIZE], pad[AES_BLOCK_SIZE];
++	u8 *pos, *end;
++	size_t i, e, left, total_len;
++
++	ctx = aes_encrypt_init(key, 16);
++	if (ctx == NULL)
++		return -1;
++	_rtw_memset(cbc, 0, AES_BLOCK_SIZE);
++
++	total_len = 0;
++	for (e = 0; e < num_elem; e++)
++		total_len += len[e];
++	left = total_len;
++
++	e = 0;
++	pos = addr[0];
++	end = pos + len[0];
++
++	while (left >= AES_BLOCK_SIZE) {
++		for (i = 0; i < AES_BLOCK_SIZE; i++) {
++			cbc[i] ^= *pos++;
++			if (pos >= end) {
++				e++;
++				pos = addr[e];
++				end = pos + len[e];
++			}
++		}
++		if (left > AES_BLOCK_SIZE)
++			aes_128_encrypt(ctx, cbc, cbc);
++		left -= AES_BLOCK_SIZE;
++	}
++
++	_rtw_memset(pad, 0, AES_BLOCK_SIZE);
++	aes_128_encrypt(ctx, pad, pad);
++	gf_mulx(pad);
++
++	if (left || total_len == 0) {
++		for (i = 0; i < left; i++) {
++			cbc[i] ^= *pos++;
++			if (pos >= end) {
++				e++;
++				pos = addr[e];
++				end = pos + len[e];
++			}
++		}
++		cbc[left] ^= 0x80;
++		gf_mulx(pad);
++	}
++
++	for (i = 0; i < AES_BLOCK_SIZE; i++)
++		pad[i] ^= cbc[i];
++	aes_128_encrypt(ctx, pad, mac);
++	aes_encrypt_deinit(ctx);
++	return 0;
++}
++
++
++/**
++ * omac1_aes_128 - One-Key CBC MAC (OMAC1) hash with AES-128 (aka AES-CMAC)
++ * @key: 128-bit key for the hash operation
++ * @data: Data buffer for which a MAC is determined
++ * @data_len: Length of data buffer in bytes
++ * @mac: Buffer for MAC (128 bits, i.e., 16 bytes)
++ * Returns: 0 on success, -1 on failure
++ *
++ * This is a mode for using block cipher (AES in this case) for authentication.
++ * OMAC1 was standardized with the name CMAC by NIST in a Special Publication
++ * (SP) 800-38B.
++ */ //modify for CONFIG_IEEE80211W
++int omac1_aes_128(u8 *key, u8 *data, size_t data_len, u8 *mac)
++{
++	return omac1_aes_128_vector(key, 1, &data, &data_len, mac);
++}
++#endif //PLATFORM_FREEBSD Baron
++
++#ifdef CONFIG_TDLS
++void wpa_tdls_generate_tpk(_adapter *padapter, struct sta_info *psta)
++{
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	u8 *SNonce = psta->SNonce;
++	u8 *ANonce = psta->ANonce;
++
++	u8 key_input[SHA256_MAC_LEN];
++	u8 *nonce[2];
++	size_t len[2];
++	u8 data[3 * ETH_ALEN];
++
++	/* IEEE Std 802.11z-2010 8.5.9.1:
++	 * TPK-Key-Input = SHA-256(min(SNonce, ANonce) || max(SNonce, ANonce))
++	 */
++	len[0] = 32;
++	len[1] = 32;
++	if (os_memcmp(SNonce, ANonce, 32) < 0) {
++		nonce[0] = SNonce;
++		nonce[1] = ANonce;
++	} else {
++		nonce[0] = ANonce;
++		nonce[1] = SNonce;
++	}
++
++	sha256_vector(2, nonce, len, key_input);
++
++	/*
++	 * TPK-Key-Data = KDF-N_KEY(TPK-Key-Input, "TDLS PMK",
++	 *	min(MAC_I, MAC_R) || max(MAC_I, MAC_R) || BSSID || N_KEY)
++	 * TODO: is N_KEY really included in KDF Context and if so, in which
++	 * presentation format (little endian 16-bit?) is it used? It gets
++	 * added by the KDF anyway..
++	 */
++
++	if (os_memcmp(myid(&(padapter->eeprompriv)), psta->hwaddr, ETH_ALEN) < 0) {
++		_rtw_memcpy(data, myid(&(padapter->eeprompriv)), ETH_ALEN);
++		_rtw_memcpy(data + ETH_ALEN, psta->hwaddr, ETH_ALEN);
++	} else {
++		_rtw_memcpy(data, psta->hwaddr, ETH_ALEN);
++		_rtw_memcpy(data + ETH_ALEN, myid(&(padapter->eeprompriv)), ETH_ALEN);
++	}
++	_rtw_memcpy(data + 2 * ETH_ALEN, get_bssid(pmlmepriv), ETH_ALEN);
++
++	sha256_prf(key_input, SHA256_MAC_LEN, "TDLS PMK", data, sizeof(data), (u8 *) &psta->tpk, sizeof(psta->tpk));	
++
++
++}
++
++/**
++ * wpa_tdls_ftie_mic - Calculate TDLS FTIE MIC
++ * @kck: TPK-KCK
++ * @lnkid: Pointer to the beginning of Link Identifier IE
++ * @rsnie: Pointer to the beginning of RSN IE used for handshake
++ * @timeoutie: Pointer to the beginning of Timeout IE used for handshake
++ * @ftie: Pointer to the beginning of FT IE
++ * @mic: Pointer for writing MIC
++ *
++ * Calculate MIC for TDLS frame.
++ */
++int wpa_tdls_ftie_mic(u8 *kck, u8 trans_seq, 
++							u8 *lnkid, u8 *rsnie, u8 *timeoutie, u8 *ftie,
++							u8 *mic)
++{
++	u8 *buf, *pos;
++	struct wpa_tdls_ftie *_ftie;
++	struct wpa_tdls_lnkid *_lnkid;
++	int ret;
++	int len = 2 * ETH_ALEN + 1 + 2 + lnkid[1] + 2 + rsnie[1] +
++		2 + timeoutie[1] + 2 + ftie[1];
++	buf = rtw_zmalloc(len);
++	if (!buf) {
++		DBG_871X("TDLS: No memory for MIC calculation\n");
++		return -1;
++	}
++
++	pos = buf;
++	_lnkid = (struct wpa_tdls_lnkid *) lnkid;
++	/* 1) TDLS initiator STA MAC address */
++	_rtw_memcpy(pos, _lnkid->init_sta, ETH_ALEN);
++	pos += ETH_ALEN;
++	/* 2) TDLS responder STA MAC address */
++	_rtw_memcpy(pos, _lnkid->resp_sta, ETH_ALEN);
++	pos += ETH_ALEN;
++	/* 3) Transaction Sequence number */
++	*pos++ = trans_seq;
++	/* 4) Link Identifier IE */
++	_rtw_memcpy(pos, lnkid, 2 + lnkid[1]);
++	pos += 2 + lnkid[1];
++	/* 5) RSN IE */
++	_rtw_memcpy(pos, rsnie, 2 + rsnie[1]);
++	pos += 2 + rsnie[1];
++	/* 6) Timeout Interval IE */
++	_rtw_memcpy(pos, timeoutie, 2 + timeoutie[1]);
++	pos += 2 + timeoutie[1];
++	/* 7) FTIE, with the MIC field of the FTIE set to 0 */
++	_rtw_memcpy(pos, ftie, 2 + ftie[1]);
++	_ftie = (struct wpa_tdls_ftie *) pos;
++	_rtw_memset(_ftie->mic, 0, TDLS_MIC_LEN);
++	pos += 2 + ftie[1];
++ 
++	ret = omac1_aes_128(kck, buf, pos - buf, mic);
++	rtw_mfree(buf, len);
++	return ret;
++
++}
++
++int tdls_verify_mic(u8 *kck, u8 trans_seq,
++							u8 *lnkid, u8 *rsnie, u8 *timeoutie, u8 *ftie)
++{
++	u8 *buf, *pos;
++	int len;
++	u8 mic[16];
++	int ret;
++	u8 *rx_ftie, *tmp_ftie;
++
++	if (lnkid == NULL || rsnie == NULL ||
++	    timeoutie == NULL || ftie == NULL){
++		return 0;
++	}
++	
++	len = 2 * ETH_ALEN + 1 + 2 + 18 + 2 + *(rsnie+1) + 2 + *(timeoutie+1) + 2 + *(ftie+1);
++
++	buf = rtw_zmalloc(len);
++	if (buf == NULL)
++		return 0;
++
++	pos = buf;
++	/* 1) TDLS initiator STA MAC address */
++	_rtw_memcpy(pos, lnkid + ETH_ALEN + 2, ETH_ALEN);
++	pos += ETH_ALEN;
++	/* 2) TDLS responder STA MAC address */
++	_rtw_memcpy(pos, lnkid + 2 * ETH_ALEN + 2, ETH_ALEN);
++	pos += ETH_ALEN;
++	/* 3) Transaction Sequence number */
++	*pos++ = trans_seq;
++	/* 4) Link Identifier IE */
++	_rtw_memcpy(pos, lnkid, 2 + 18);
++	pos += 2 + 18;
++	/* 5) RSN IE */
++	_rtw_memcpy(pos, rsnie, 2 + *(rsnie+1));
++	pos += 2 + *(rsnie+1);
++	/* 6) Timeout Interval IE */
++	_rtw_memcpy(pos, timeoutie, 2 + *(timeoutie+1));
++	pos += 2 + *(timeoutie+1);
++	/* 7) FTIE, with the MIC field of the FTIE set to 0 */
++	_rtw_memcpy(pos, ftie, 2 + *(ftie+1));
++	pos += 2;
++	tmp_ftie = (u8 *) (pos+2);
++	_rtw_memset(tmp_ftie, 0, 16);
++	pos += *(ftie+1);
++
++	ret = omac1_aes_128(kck, buf, pos - buf, mic);
++	rtw_mfree(buf, len);
++	if (ret)
++		return 0;
++	rx_ftie = ftie+4;
++
++	if (os_memcmp(mic, rx_ftie, 16) == 0) {
++		//Valid MIC
++		return 1;
++	}
++
++	//Invalid MIC
++	DBG_871X( "[%s] Invalid MIC\n", __FUNCTION__);
++	return 0;
++
++}
++#endif //CONFIG_TDLS
++
++#ifdef PLATFORM_WINDOWS
++void rtw_use_tkipkey_handler (
++	IN	PVOID					SystemSpecific1,
++	IN	PVOID					FunctionContext,
++	IN	PVOID					SystemSpecific2,
++	IN	PVOID					SystemSpecific3
++	)
++#endif
++#ifdef PLATFORM_LINUX
++void rtw_use_tkipkey_handler(void *FunctionContext)
++#endif
++#ifdef PLATFORM_FREEBSD
++void rtw_use_tkipkey_handler(void *FunctionContext)
++#endif
++{
++        _adapter *padapter = (_adapter *)FunctionContext;
++
++
++_func_enter_;			
++
++	RT_TRACE(_module_rtl871x_security_c_,_drv_err_,("^^^rtw_use_tkipkey_handler ^^^\n"));
++	
++/*
++	if(padapter->bDriverStopped ||padapter->bSurpriseRemoved){
++			RT_TRACE(_module_rtl871x_security_c_,_drv_err_,("^^^rtw_use_tkipkey_handler (padapter->bDriverStopped %d)(padapter->bSurpriseRemoved %d)^^^\n",padapter->bDriverStopped,padapter->bSurpriseRemoved));
++
++		return;
++	}
++	*/
++	
++	padapter->securitypriv.busetkipkey=_TRUE;
++
++	RT_TRACE(_module_rtl871x_security_c_,_drv_err_,("^^^rtw_use_tkipkey_handler padapter->securitypriv.busetkipkey=%d^^^\n",padapter->securitypriv.busetkipkey));
++
++_func_exit_;	
++
++}
++
++/* Restore HW wep key setting according to key_mask */
++void rtw_sec_restore_wep_key(_adapter *adapter)
++{
++	struct security_priv* securitypriv=&(adapter->securitypriv);
++	sint keyid;
++
++	if((_WEP40_ == securitypriv->dot11PrivacyAlgrthm) ||(_WEP104_ == securitypriv->dot11PrivacyAlgrthm)) {
++		for(keyid=0;keyid<4;keyid++){
++			if(securitypriv->key_mask & BIT(keyid)){
++				if(keyid == securitypriv->dot11PrivacyKeyIndex)
++					rtw_set_key(adapter,securitypriv, keyid, 1);
++				else
++					rtw_set_key(adapter,securitypriv, keyid, 0);
++			}
++		}
++	}
++}
++
++u8 rtw_handle_tkip_countermeasure(_adapter* adapter, const char *caller)
++{
++	struct security_priv* securitypriv=&(adapter->securitypriv);
++	u8 status = _SUCCESS;
++
++	if (securitypriv->btkip_countermeasure == _TRUE) {
++		u32 passing_ms = rtw_get_passing_time_ms(securitypriv->btkip_countermeasure_time);
++		if (passing_ms > 60*1000) {
++			LOG_LEVEL(_drv_info_, "%s("ADPT_FMT") countermeasure time:%ds > 60s \n",
++				caller, ADPT_ARG(adapter), passing_ms/1000);
++			securitypriv->btkip_countermeasure = _FALSE;
++			securitypriv->btkip_countermeasure_time = 0;
++		} else {
++			LOG_LEVEL(_drv_warning_, "%s("ADPT_FMT") countermeasure time:%ds < 60s \n",
++				caller, ADPT_ARG(adapter), passing_ms/1000);
++			status = _FAIL;
++		}
++	}
++
++	return status;
++}
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_sreset.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_sreset.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_sreset.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_sreset.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,352 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++
++#include<rtw_sreset.h>
++
++void sreset_init_value(_adapter *padapter)
++{
++#if defined(DBG_CONFIG_ERROR_DETECT)
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++	struct sreset_priv *psrtpriv = &pHalData->srestpriv;
++
++	_rtw_mutex_init(&psrtpriv->silentreset_mutex);
++	psrtpriv->silent_reset_inprogress = _FALSE;
++	psrtpriv->Wifi_Error_Status = WIFI_STATUS_SUCCESS;
++	psrtpriv->last_tx_time =0;
++	psrtpriv->last_tx_complete_time =0;
++#endif
++}
++void sreset_reset_value(_adapter *padapter)
++{
++#if defined(DBG_CONFIG_ERROR_DETECT)
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++	struct sreset_priv *psrtpriv = &pHalData->srestpriv;
++
++	psrtpriv->silent_reset_inprogress = _FALSE;
++	psrtpriv->Wifi_Error_Status = WIFI_STATUS_SUCCESS;
++	psrtpriv->last_tx_time =0;
++	psrtpriv->last_tx_complete_time =0;
++#endif
++}
++
++u8 sreset_get_wifi_status(_adapter *padapter)
++{
++#if defined(DBG_CONFIG_ERROR_DETECT)
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++	struct sreset_priv *psrtpriv = &pHalData->srestpriv;
++
++	u8 status = WIFI_STATUS_SUCCESS;
++	u32 val32 = 0;
++	_irqL irqL;
++	if(psrtpriv->silent_reset_inprogress == _TRUE)
++        {
++		return status;
++	}
++	val32 =rtw_read32(padapter,REG_TXDMA_STATUS);
++	if(val32==0xeaeaeaea){
++		psrtpriv->Wifi_Error_Status = WIFI_IF_NOT_EXIST;
++	}
++	else if(val32!=0){
++		DBG_8192C("txdmastatu(%x)\n",val32);
++		psrtpriv->Wifi_Error_Status = WIFI_MAC_TXDMA_ERROR;
++	}
++
++	if(WIFI_STATUS_SUCCESS !=psrtpriv->Wifi_Error_Status)
++	{
++		DBG_8192C("==>%s error_status(0x%x) \n",__FUNCTION__,psrtpriv->Wifi_Error_Status);
++		status = (psrtpriv->Wifi_Error_Status &( ~(USB_READ_PORT_FAIL|USB_WRITE_PORT_FAIL)));
++	}
++	DBG_8192C("==> %s wifi_status(0x%x)\n",__FUNCTION__,status);
++
++	//status restore
++	psrtpriv->Wifi_Error_Status = WIFI_STATUS_SUCCESS;
++
++	return status;
++#else
++	return WIFI_STATUS_SUCCESS;
++#endif
++}
++
++void sreset_set_wifi_error_status(_adapter *padapter, u32 status)
++{
++#if defined(DBG_CONFIG_ERROR_DETECT)
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++	pHalData->srestpriv.Wifi_Error_Status = status;
++#endif
++}
++
++void sreset_set_trigger_point(_adapter *padapter, s32 tgp)
++{
++#if defined(DBG_CONFIG_ERROR_DETECT)
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++	pHalData->srestpriv.dbg_trigger_point = tgp;
++#endif
++}
++
++bool sreset_inprogress(_adapter *padapter)
++{
++#if defined(DBG_CONFIG_ERROR_RESET)
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++	return pHalData->srestpriv.silent_reset_inprogress;
++#else
++	return _FALSE;
++#endif
++}
++
++void sreset_restore_security_station(_adapter *padapter)
++{
++	u8 EntryId = 0;
++	struct mlme_priv *mlmepriv = &padapter->mlmepriv;
++	struct sta_priv * pstapriv = &padapter->stapriv;
++	struct sta_info *psta;
++	struct security_priv* psecuritypriv=&(padapter->securitypriv);
++	struct mlme_ext_info	*pmlmeinfo = &padapter->mlmeextpriv.mlmext_info;
++
++	{
++		u8 val8;
++
++		if (pmlmeinfo->auth_algo == dot11AuthAlgrthm_8021X) {
++			val8 = 0xcc;
++		#ifdef CONFIG_WAPI_SUPPORT
++		} else if (padapter->wapiInfo.bWapiEnable && pmlmeinfo->auth_algo == dot11AuthAlgrthm_WAPI) {
++			//Disable TxUseDefaultKey, RxUseDefaultKey, RxBroadcastUseDefaultKey.
++			val8 = 0x4c;
++		#endif
++		} else {
++			val8 = 0xcf;
++		}
++		rtw_hal_set_hwreg(padapter, HW_VAR_SEC_CFG, (u8 *)(&val8));
++	}
++
++	#if 0
++	if (	( padapter->securitypriv.dot11PrivacyAlgrthm == _WEP40_ ) ||
++		( padapter->securitypriv.dot11PrivacyAlgrthm == _WEP104_ ))
++	{
++
++		for(EntryId=0; EntryId<4; EntryId++)
++		{
++			if(EntryId == psecuritypriv->dot11PrivacyKeyIndex)
++				rtw_set_key(padapter,&padapter->securitypriv, EntryId, 1);
++			else
++				rtw_set_key(padapter,&padapter->securitypriv, EntryId, 0);
++		}
++
++	}
++	else
++	#endif
++	if((padapter->securitypriv.dot11PrivacyAlgrthm == _TKIP_) ||
++		(padapter->securitypriv.dot11PrivacyAlgrthm == _AES_))
++	{
++		psta = rtw_get_stainfo(pstapriv, get_bssid(mlmepriv));
++		if (psta == NULL) {
++			//DEBUG_ERR( ("Set wpa_set_encryption: Obtain Sta_info fail \n"));
++		}
++		else
++		{
++			//pairwise key
++			rtw_setstakey_cmd(padapter, (unsigned char *)psta, _TRUE);
++			//group key
++			rtw_set_key(padapter,&padapter->securitypriv,padapter->securitypriv.dot118021XGrpKeyid, 0);
++		}
++	}
++}
++
++void sreset_restore_network_station(_adapter *padapter)
++{
++	struct mlme_priv *mlmepriv = &padapter->mlmepriv;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	#if 0
++	{
++	//=======================================================
++	// reset related register of Beacon control
++
++	//set MSR to nolink
++	Set_MSR(padapter, _HW_STATE_NOLINK_);		
++	// reject all data frame
++	rtw_write16(padapter, REG_RXFLTMAP2,0x00);
++	//reset TSF
++	rtw_write8(padapter, REG_DUAL_TSF_RST, (BIT(0)|BIT(1)));
++
++	// disable update TSF
++	SetBcnCtrlReg(padapter, BIT(4), 0);
++
++	//=======================================================
++	}
++	#endif
++	
++	rtw_setopmode_cmd(padapter, Ndis802_11Infrastructure);
++
++	{
++		u8 threshold;
++		#ifdef CONFIG_USB_HCI
++		// TH=1 => means that invalidate usb rx aggregation
++		// TH=0 => means that validate usb rx aggregation, use init value.
++		if(mlmepriv->htpriv.ht_option) {
++			if(padapter->registrypriv.wifi_spec==1)		
++				threshold = 1;
++			else
++				threshold = 0;
++			rtw_hal_set_hwreg(padapter, HW_VAR_RXDMA_AGG_PG_TH, (u8 *)(&threshold));
++		} else {
++			threshold = 1;
++			rtw_hal_set_hwreg(padapter, HW_VAR_RXDMA_AGG_PG_TH, (u8 *)(&threshold));
++		}
++		#endif
++	}
++
++	set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode);
++
++	//disable dynamic functions, such as high power, DIG
++	//Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, _FALSE);
++	
++	rtw_hal_set_hwreg(padapter, HW_VAR_BSSID, pmlmeinfo->network.MacAddress);
++
++	{
++		u8	join_type = 0;
++		rtw_hal_set_hwreg(padapter, HW_VAR_MLME_JOIN, (u8 *)(&join_type));
++	}
++
++	Set_MSR(padapter, (pmlmeinfo->state & 0x3));
++
++	mlmeext_joinbss_event_callback(padapter, 1);
++	//restore Sequence No.
++	rtw_write8(padapter,0x4dc,padapter->xmitpriv.nqos_ssn);
++
++	sreset_restore_security_station(padapter);
++}
++
++void sreset_restore_network_status(_adapter *padapter)
++{
++	struct mlme_priv *mlmepriv = &padapter->mlmepriv;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	if (check_fwstate(mlmepriv, WIFI_STATION_STATE)) {
++		DBG_871X(FUNC_ADPT_FMT" fwstate:0x%08x - WIFI_STATION_STATE\n", FUNC_ADPT_ARG(padapter), get_fwstate(mlmepriv));
++		sreset_restore_network_station(padapter);
++	} else if (check_fwstate(mlmepriv, WIFI_AP_STATE)) {
++		DBG_871X(FUNC_ADPT_FMT" fwstate:0x%08x - WIFI_AP_STATE\n", FUNC_ADPT_ARG(padapter), get_fwstate(mlmepriv));
++		rtw_ap_restore_network(padapter);
++	} else if (check_fwstate(mlmepriv, WIFI_ADHOC_STATE)) {
++		DBG_871X(FUNC_ADPT_FMT" fwstate:0x%08x - WIFI_ADHOC_STATE\n", FUNC_ADPT_ARG(padapter), get_fwstate(mlmepriv));
++	} else {
++		DBG_871X(FUNC_ADPT_FMT" fwstate:0x%08x - ???\n", FUNC_ADPT_ARG(padapter), get_fwstate(mlmepriv));
++	}
++}
++
++void sreset_stop_adapter(_adapter *padapter)
++{
++	struct mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
++	struct xmit_priv	*pxmitpriv = &padapter->xmitpriv;
++
++	if (padapter == NULL)
++		return;
++
++	DBG_871X(FUNC_ADPT_FMT"\n", FUNC_ADPT_ARG(padapter));
++
++	if (!rtw_netif_queue_stopped(padapter->pnetdev))
++		rtw_netif_stop_queue(padapter->pnetdev);
++
++	rtw_cancel_all_timer(padapter);
++
++	/* TODO: OS and HCI independent */
++	#if defined(PLATFORM_LINUX) && defined(CONFIG_USB_HCI)
++	tasklet_kill(&pxmitpriv->xmit_tasklet);
++	#endif
++
++	if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY))
++		rtw_scan_abort(padapter);
++
++	if (check_fwstate(pmlmepriv, _FW_UNDER_LINKING))
++		_rtw_join_timeout_handler(padapter);
++
++}
++
++void sreset_start_adapter(_adapter *padapter)
++{
++	struct mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
++	struct xmit_priv	*pxmitpriv = &padapter->xmitpriv;
++
++	if (padapter == NULL)
++		return;
++
++	DBG_871X(FUNC_ADPT_FMT"\n", FUNC_ADPT_ARG(padapter));
++
++	if (check_fwstate(pmlmepriv, _FW_LINKED)) {
++		sreset_restore_network_status(padapter);
++	}
++
++	/* TODO: OS and HCI independent */
++	#if defined(PLATFORM_LINUX) && defined(CONFIG_USB_HCI)
++	tasklet_hi_schedule(&pxmitpriv->xmit_tasklet);
++	#endif
++
++	_set_timer(&padapter->mlmepriv.dynamic_chk_timer, 2000);
++
++	if (rtw_netif_queue_stopped(padapter->pnetdev))
++		rtw_netif_wake_queue(padapter->pnetdev);
++
++}
++
++void sreset_reset(_adapter *padapter)
++{
++#ifdef DBG_CONFIG_ERROR_RESET
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++	struct sreset_priv *psrtpriv = &pHalData->srestpriv;
++	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
++	struct mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
++	struct xmit_priv	*pxmitpriv = &padapter->xmitpriv;
++	_irqL irqL;
++	u32 start = rtw_get_current_time();
++
++	DBG_871X("%s\n", __FUNCTION__);
++
++	psrtpriv->Wifi_Error_Status = WIFI_STATUS_SUCCESS;
++
++	_enter_pwrlock(&pwrpriv->lock);
++
++	psrtpriv->silent_reset_inprogress = _TRUE;
++	pwrpriv->change_rfpwrstate = rf_off;
++
++	sreset_stop_adapter(padapter);
++	#ifdef CONFIG_CONCURRENT_MODE
++	sreset_stop_adapter(padapter->pbuddy_adapter);
++	#endif
++
++	#ifdef CONFIG_IPS
++	_ips_enter(padapter);
++	_ips_leave(padapter);
++	#endif
++
++	sreset_start_adapter(padapter);
++	#ifdef CONFIG_CONCURRENT_MODE
++	sreset_start_adapter(padapter->pbuddy_adapter);
++	#endif
++
++	psrtpriv->silent_reset_inprogress = _FALSE;
++
++	_exit_pwrlock(&pwrpriv->lock);
++
++	DBG_871X("%s done in %d ms\n", __FUNCTION__, rtw_get_passing_time_ms(start));
++#endif
++}
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_sta_mgt.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_sta_mgt.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_sta_mgt.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_sta_mgt.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,848 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _RTW_STA_MGT_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <recv_osdep.h>
++#include <xmit_osdep.h>
++#include <mlme_osdep.h>
++
++
++#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS)
++
++#error "Shall be Linux or Windows, but not both!\n"
++
++#endif
++
++#include <sta_info.h>
++
++void _rtw_init_stainfo(struct sta_info *psta);
++void _rtw_init_stainfo(struct sta_info *psta)
++{
++
++_func_enter_;
++
++	_rtw_memset((u8 *)psta, 0, sizeof (struct sta_info));
++
++	 _rtw_spinlock_init(&psta->lock);
++	_rtw_init_listhead(&psta->list);
++	_rtw_init_listhead(&psta->hash_list);
++	//_rtw_init_listhead(&psta->asoc_list);
++	//_rtw_init_listhead(&psta->sleep_list);
++	//_rtw_init_listhead(&psta->wakeup_list);	
++
++	_rtw_init_queue(&psta->sleep_q);
++	psta->sleepq_len = 0;
++
++	_rtw_init_sta_xmit_priv(&psta->sta_xmitpriv);
++	_rtw_init_sta_recv_priv(&psta->sta_recvpriv);
++	
++#ifdef CONFIG_AP_MODE
++
++	_rtw_init_listhead(&psta->asoc_list);
++
++	_rtw_init_listhead(&psta->auth_list);
++	
++	psta->expire_to = 0;
++	
++	psta->flags = 0;
++	
++	psta->capability = 0;
++
++	psta->bpairwise_key_installed = _FALSE;
++
++
++#ifdef CONFIG_NATIVEAP_MLME
++	psta->nonerp_set = 0;
++	psta->no_short_slot_time_set = 0;
++	psta->no_short_preamble_set = 0;
++	psta->no_ht_gf_set = 0;
++	psta->no_ht_set = 0;
++	psta->ht_20mhz_set = 0;
++#endif	
++
++#ifdef CONFIG_TX_MCAST2UNI
++	psta->under_exist_checking = 0;
++#endif	// CONFIG_TX_MCAST2UNI
++	
++	psta->keep_alive_trycnt = 0;
++
++#endif	// CONFIG_AP_MODE	
++	
++_func_exit_;	
++
++}
++
++u32	_rtw_init_sta_priv(struct	sta_priv *pstapriv)
++{
++	struct sta_info *psta;
++	s32 i;
++
++_func_enter_;	
++
++	pstapriv->pallocated_stainfo_buf = rtw_zvmalloc (sizeof(struct sta_info) * NUM_STA+ 4);
++	
++	if(!pstapriv->pallocated_stainfo_buf)
++		return _FAIL;
++
++	pstapriv->pstainfo_buf = pstapriv->pallocated_stainfo_buf + 4 - 
++		((SIZE_PTR)(pstapriv->pallocated_stainfo_buf ) & 3);
++
++	_rtw_init_queue(&pstapriv->free_sta_queue);
++
++	_rtw_spinlock_init(&pstapriv->sta_hash_lock);
++	
++	//_rtw_init_queue(&pstapriv->asoc_q);
++	pstapriv->asoc_sta_count = 0;
++	_rtw_init_queue(&pstapriv->sleep_q);
++	_rtw_init_queue(&pstapriv->wakeup_q);
++
++	psta = (struct sta_info *)(pstapriv->pstainfo_buf);
++
++		
++	for(i = 0; i < NUM_STA; i++)
++	{
++		_rtw_init_stainfo(psta);
++
++		_rtw_init_listhead(&(pstapriv->sta_hash[i]));
++
++		rtw_list_insert_tail(&psta->list, get_list_head(&pstapriv->free_sta_queue));
++
++		psta++;
++	}
++
++	
++
++#ifdef CONFIG_AP_MODE
++
++	pstapriv->sta_dz_bitmap = 0;
++	pstapriv->tim_bitmap = 0;
++
++	_rtw_init_listhead(&pstapriv->asoc_list);
++	_rtw_init_listhead(&pstapriv->auth_list);
++	_rtw_spinlock_init(&pstapriv->asoc_list_lock);
++	_rtw_spinlock_init(&pstapriv->auth_list_lock);
++	pstapriv->asoc_list_cnt = 0;
++	pstapriv->auth_list_cnt = 0;
++
++	pstapriv->auth_to = 3; // 3*2 = 6 sec 
++	pstapriv->assoc_to = 3;
++	//pstapriv->expire_to = 900;// 900*2 = 1800 sec = 30 min, expire after no any traffic.
++	//pstapriv->expire_to = 30;// 30*2 = 60 sec = 1 min, expire after no any traffic.
++#ifdef CONFIG_ACTIVE_KEEP_ALIVE_CHECK
++	pstapriv->expire_to = 3; // 3*2 = 6 sec
++#else
++	pstapriv->expire_to = 60;// 60*2 = 120 sec = 2 min, expire after no any traffic.
++#endif	
++	pstapriv->max_num_sta = NUM_STA;
++		
++#endif
++	
++_func_exit_;		
++
++	return _SUCCESS;
++	
++}
++
++inline int rtw_stainfo_offset(struct sta_priv *stapriv, struct sta_info *sta)
++{
++	int offset = (((u8 *)sta) - stapriv->pstainfo_buf)/sizeof(struct sta_info);
++
++	if (!stainfo_offset_valid(offset))
++		DBG_871X("%s invalid offset(%d), out of range!!!", __func__, offset);
++
++	return offset;
++}
++
++inline struct sta_info *rtw_get_stainfo_by_offset(struct sta_priv *stapriv, int offset)
++{
++	if (!stainfo_offset_valid(offset))
++		DBG_871X("%s invalid offset(%d), out of range!!!", __func__, offset);
++
++	return (struct sta_info *)(stapriv->pstainfo_buf + offset * sizeof(struct sta_info));
++}
++
++void	_rtw_free_sta_xmit_priv_lock(struct sta_xmit_priv *psta_xmitpriv);
++void	_rtw_free_sta_xmit_priv_lock(struct sta_xmit_priv *psta_xmitpriv)
++{
++_func_enter_;
++
++	_rtw_spinlock_free(&psta_xmitpriv->lock);
++
++	_rtw_spinlock_free(&(psta_xmitpriv->be_q.sta_pending.lock));
++	_rtw_spinlock_free(&(psta_xmitpriv->bk_q.sta_pending.lock));
++	_rtw_spinlock_free(&(psta_xmitpriv->vi_q.sta_pending.lock));
++	_rtw_spinlock_free(&(psta_xmitpriv->vo_q.sta_pending.lock));
++_func_exit_;	
++}
++
++static void	_rtw_free_sta_recv_priv_lock(struct sta_recv_priv *psta_recvpriv)
++{
++_func_enter_;	
++
++	_rtw_spinlock_free(&psta_recvpriv->lock);
++
++	_rtw_spinlock_free(&(psta_recvpriv->defrag_q.lock));
++
++_func_exit_;
++
++}
++
++void rtw_mfree_stainfo(struct sta_info *psta);
++void rtw_mfree_stainfo(struct sta_info *psta)
++{
++_func_enter_;
++
++	if(&psta->lock != NULL)
++		 _rtw_spinlock_free(&psta->lock);
++
++	_rtw_free_sta_xmit_priv_lock(&psta->sta_xmitpriv);
++	_rtw_free_sta_recv_priv_lock(&psta->sta_recvpriv);
++	
++_func_exit_;	
++}
++
++
++// this function is used to free the memory of lock || sema for all stainfos
++void rtw_mfree_all_stainfo(struct sta_priv *pstapriv );
++void rtw_mfree_all_stainfo(struct sta_priv *pstapriv )
++{
++	_irqL	 irqL;
++	_list	*plist, *phead;
++	struct sta_info *psta = NULL;
++	
++_func_enter_;	
++
++	_enter_critical_bh(&pstapriv->sta_hash_lock, &irqL);
++
++	phead = get_list_head(&pstapriv->free_sta_queue);
++	plist = get_next(phead);
++		
++	while ((rtw_end_of_queue_search(phead, plist)) == _FALSE)
++	{
++		psta = LIST_CONTAINOR(plist, struct sta_info ,list);
++		plist = get_next(plist);
++
++		rtw_mfree_stainfo(psta);
++	}
++	
++	_exit_critical_bh(&pstapriv->sta_hash_lock, &irqL);
++
++_func_exit_;	
++
++}
++
++void rtw_mfree_sta_priv_lock(struct	sta_priv *pstapriv);
++void rtw_mfree_sta_priv_lock(struct	sta_priv *pstapriv)
++{
++#ifdef CONFIG_AP_MODE
++	struct wlan_acl_pool *pacl_list = &pstapriv->acl_list;
++#endif
++
++	 rtw_mfree_all_stainfo(pstapriv); //be done before free sta_hash_lock
++
++	_rtw_spinlock_free(&pstapriv->free_sta_queue.lock);
++
++	_rtw_spinlock_free(&pstapriv->sta_hash_lock);
++	_rtw_spinlock_free(&pstapriv->wakeup_q.lock);
++	_rtw_spinlock_free(&pstapriv->sleep_q.lock);
++
++#ifdef CONFIG_AP_MODE
++	_rtw_spinlock_free(&pstapriv->asoc_list_lock);
++	_rtw_spinlock_free(&pstapriv->auth_list_lock);
++	_rtw_spinlock_free(&pacl_list->acl_node_q.lock);
++#endif
++
++}
++
++u32	_rtw_free_sta_priv(struct	sta_priv *pstapriv)
++{
++	_irqL 	irqL;
++	_list	*phead, *plist;
++	struct sta_info *psta = NULL;
++	struct recv_reorder_ctrl *preorder_ctrl;
++	int 	index;
++
++_func_enter_;
++	if(pstapriv){
++
++		/*	delete all reordering_ctrl_timer		*/ 
++		_enter_critical_bh(&pstapriv->sta_hash_lock, &irqL);
++		for(index = 0; index < NUM_STA; index++)
++		{
++			phead = &(pstapriv->sta_hash[index]);
++			plist = get_next(phead);
++			
++			while ((rtw_end_of_queue_search(phead, plist)) == _FALSE)
++			{
++				int i;	
++				psta = LIST_CONTAINOR(plist, struct sta_info ,hash_list);
++				plist = get_next(plist);
++
++				for(i=0; i < 16 ; i++)
++				{
++					preorder_ctrl = &psta->recvreorder_ctrl[i];
++					_cancel_timer_ex(&preorder_ctrl->reordering_ctrl_timer);	
++				}
++			}
++		}
++		_exit_critical_bh(&pstapriv->sta_hash_lock, &irqL);
++		/*===============================*/
++		
++		rtw_mfree_sta_priv_lock(pstapriv);
++
++		if(pstapriv->pallocated_stainfo_buf) {
++			rtw_vmfree(pstapriv->pallocated_stainfo_buf, sizeof(struct sta_info)*NUM_STA+4);
++		}
++	}
++	
++_func_exit_;
++	return _SUCCESS;
++}
++
++
++//struct	sta_info *rtw_alloc_stainfo(_queue *pfree_sta_queue, unsigned char *hwaddr)
++struct	sta_info *rtw_alloc_stainfo(struct	sta_priv *pstapriv, u8 *hwaddr) 
++{	
++	_irqL irqL, irqL2;
++	uint tmp_aid;
++	s32	index;
++	_list	*phash_list;
++	struct sta_info	*psta;
++	_queue *pfree_sta_queue;
++	struct recv_reorder_ctrl *preorder_ctrl;
++	int i = 0;
++	u16  wRxSeqInitialValue = 0xffff;
++	
++_func_enter_;	
++
++	pfree_sta_queue = &pstapriv->free_sta_queue;
++	
++	//_enter_critical_bh(&(pfree_sta_queue->lock), &irqL);
++	_enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL2);
++
++	if (_rtw_queue_empty(pfree_sta_queue) == _TRUE)
++	{
++		//_exit_critical_bh(&(pfree_sta_queue->lock), &irqL);
++		_exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL2);
++		psta = NULL;
++	}
++	else
++	{
++		psta = LIST_CONTAINOR(get_next(&pfree_sta_queue->queue), struct sta_info, list);
++		
++		rtw_list_delete(&(psta->list));
++
++		//_exit_critical_bh(&(pfree_sta_queue->lock), &irqL);
++		
++		tmp_aid = psta->aid;	
++	
++		_rtw_init_stainfo(psta);
++
++		_rtw_memcpy(psta->hwaddr, hwaddr, ETH_ALEN);
++
++		index = wifi_mac_hash(hwaddr);
++
++		RT_TRACE(_module_rtl871x_sta_mgt_c_,_drv_info_,("rtw_alloc_stainfo: index  = %x", index));
++
++		if(index >= NUM_STA){
++			RT_TRACE(_module_rtl871x_sta_mgt_c_,_drv_err_,("ERROR=> rtw_alloc_stainfo: index >= NUM_STA"));
++			psta= NULL;	
++			goto exit;
++		}
++		phash_list = &(pstapriv->sta_hash[index]);
++
++		//_enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL2);
++
++		rtw_list_insert_tail(&psta->hash_list, phash_list);
++
++		pstapriv->asoc_sta_count ++ ;
++
++		//_exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL2);
++
++// Commented by Albert 2009/08/13
++// For the SMC router, the sequence number of first packet of WPS handshake will be 0.
++// In this case, this packet will be dropped by recv_decache function if we use the 0x00 as the default value for tid_rxseq variable.
++// So, we initialize the tid_rxseq variable as the 0xffff.
++
++		for( i = 0; i < 16; i++ )
++		{
++                     _rtw_memcpy( &psta->sta_recvpriv.rxcache.tid_rxseq[ i ], &wRxSeqInitialValue, 2 );
++		}
++
++		RT_TRACE(_module_rtl871x_sta_mgt_c_,_drv_info_,("alloc number_%d stainfo  with hwaddr = %x %x %x %x %x %x  \n", 
++		pstapriv->asoc_sta_count , hwaddr[0], hwaddr[1], hwaddr[2],hwaddr[3],hwaddr[4],hwaddr[5]));
++
++		init_addba_retry_timer(pstapriv->padapter, psta);
++
++#ifdef CONFIG_TDLS
++		psta->padapter = pstapriv->padapter;
++		init_TPK_timer(pstapriv->padapter, psta);
++		init_ch_switch_timer(pstapriv->padapter, psta);
++		init_base_ch_timer(pstapriv->padapter, psta);
++		init_off_ch_timer(pstapriv->padapter, psta);
++		init_handshake_timer(pstapriv->padapter, psta);
++		init_tdls_alive_timer(pstapriv->padapter, psta);
++#endif //CONFIG_TDLS
++
++		//for A-MPDU Rx reordering buffer control
++		for(i=0; i < 16 ; i++)
++		{
++			preorder_ctrl = &psta->recvreorder_ctrl[i];
++
++			preorder_ctrl->padapter = pstapriv->padapter;
++		
++			preorder_ctrl->enable = _FALSE;
++		
++			preorder_ctrl->indicate_seq = 0xffff;
++			#ifdef DBG_RX_SEQ
++			DBG_871X("DBG_RX_SEQ %s:%d IndicateSeq: %d\n", __FUNCTION__, __LINE__,
++				preorder_ctrl->indicate_seq);
++			#endif
++			preorder_ctrl->wend_b= 0xffff;       
++			//preorder_ctrl->wsize_b = (NR_RECVBUFF-2);
++			preorder_ctrl->wsize_b = 64;//64;
++
++			_rtw_init_queue(&preorder_ctrl->pending_recvframe_queue);
++
++			rtw_init_recv_timer(preorder_ctrl);
++		}
++
++
++		//init for DM
++		psta->rssi_stat.UndecoratedSmoothedPWDB = 0;
++		psta->rssi_stat.UndecoratedSmoothedCCK = (-1);
++		
++		/* init for the sequence number of received management frame */
++		psta->RxMgmtFrameSeqNum = 0xffff;
++	}
++	
++exit:
++
++	_exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL2);
++
++_func_exit_;
++
++	return psta;
++
++
++}
++
++
++// using pstapriv->sta_hash_lock to protect
++u32	rtw_free_stainfo(_adapter *padapter , struct sta_info *psta)
++{	
++	int i;
++	_irqL irqL0;
++	_queue *pfree_sta_queue;
++	struct recv_reorder_ctrl *preorder_ctrl;
++	struct	sta_xmit_priv	*pstaxmitpriv;
++	struct	xmit_priv	*pxmitpriv= &padapter->xmitpriv;
++	struct	sta_priv *pstapriv = &padapter->stapriv;
++	struct hw_xmit *phwxmit;
++	
++
++_func_enter_;	
++	
++	if (psta == NULL)
++		goto exit;
++
++
++	_enter_critical_bh(&psta->lock, &irqL0);
++	psta->state &= ~_FW_LINKED;
++	_exit_critical_bh(&psta->lock, &irqL0);
++
++	pfree_sta_queue = &pstapriv->free_sta_queue;
++
++
++	pstaxmitpriv = &psta->sta_xmitpriv;
++	
++	//rtw_list_delete(&psta->sleep_list);
++	
++	//rtw_list_delete(&psta->wakeup_list);
++	
++	_enter_critical_bh(&pxmitpriv->lock, &irqL0);
++	
++	rtw_free_xmitframe_queue(pxmitpriv, &psta->sleep_q);
++	psta->sleepq_len = 0;
++	
++	//vo
++	//_enter_critical_bh(&(pxmitpriv->vo_pending.lock), &irqL0);
++	rtw_free_xmitframe_queue( pxmitpriv, &pstaxmitpriv->vo_q.sta_pending);
++	rtw_list_delete(&(pstaxmitpriv->vo_q.tx_pending));
++	phwxmit = pxmitpriv->hwxmits;
++	phwxmit->accnt -= pstaxmitpriv->vo_q.qcnt;
++	pstaxmitpriv->vo_q.qcnt = 0;
++	//_exit_critical_bh(&(pxmitpriv->vo_pending.lock), &irqL0);
++
++	//vi
++	//_enter_critical_bh(&(pxmitpriv->vi_pending.lock), &irqL0);
++	rtw_free_xmitframe_queue( pxmitpriv, &pstaxmitpriv->vi_q.sta_pending);
++	rtw_list_delete(&(pstaxmitpriv->vi_q.tx_pending));
++	phwxmit = pxmitpriv->hwxmits+1;
++	phwxmit->accnt -= pstaxmitpriv->vi_q.qcnt;
++	pstaxmitpriv->vi_q.qcnt = 0;
++	//_exit_critical_bh(&(pxmitpriv->vi_pending.lock), &irqL0);
++
++	//be
++	//_enter_critical_bh(&(pxmitpriv->be_pending.lock), &irqL0);
++	rtw_free_xmitframe_queue( pxmitpriv, &pstaxmitpriv->be_q.sta_pending);
++	rtw_list_delete(&(pstaxmitpriv->be_q.tx_pending));
++	phwxmit = pxmitpriv->hwxmits+2;
++	phwxmit->accnt -= pstaxmitpriv->be_q.qcnt;
++	pstaxmitpriv->be_q.qcnt = 0;
++	//_exit_critical_bh(&(pxmitpriv->be_pending.lock), &irqL0);
++	
++	//bk
++	//_enter_critical_bh(&(pxmitpriv->bk_pending.lock), &irqL0);
++	rtw_free_xmitframe_queue( pxmitpriv, &pstaxmitpriv->bk_q.sta_pending);
++	rtw_list_delete(&(pstaxmitpriv->bk_q.tx_pending));
++	phwxmit = pxmitpriv->hwxmits+3;
++	phwxmit->accnt -= pstaxmitpriv->bk_q.qcnt;
++	pstaxmitpriv->bk_q.qcnt = 0;
++	//_exit_critical_bh(&(pxmitpriv->bk_pending.lock), &irqL0);
++	
++	_exit_critical_bh(&pxmitpriv->lock, &irqL0);
++	
++	rtw_list_delete(&psta->hash_list);
++	RT_TRACE(_module_rtl871x_sta_mgt_c_,_drv_err_,("\n free number_%d stainfo  with hwaddr = 0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x  \n",pstapriv->asoc_sta_count , psta->hwaddr[0], psta->hwaddr[1], psta->hwaddr[2],psta->hwaddr[3],psta->hwaddr[4],psta->hwaddr[5]));
++	pstapriv->asoc_sta_count --;
++	
++	
++	// re-init sta_info; 20061114 // will be init in alloc_stainfo
++	//_rtw_init_sta_xmit_priv(&psta->sta_xmitpriv);
++	//_rtw_init_sta_recv_priv(&psta->sta_recvpriv);
++
++	_cancel_timer_ex(&psta->addba_retry_timer);
++
++#ifdef CONFIG_TDLS
++	_cancel_timer_ex(&psta->TPK_timer);
++	_cancel_timer_ex(&psta->option_timer);
++	_cancel_timer_ex(&psta->base_ch_timer);
++	_cancel_timer_ex(&psta->off_ch_timer);
++	_cancel_timer_ex(&psta->alive_timer1);
++	_cancel_timer_ex(&psta->alive_timer2);
++#endif //CONFIG_TDLS
++
++	//for A-MPDU Rx reordering buffer control, cancel reordering_ctrl_timer
++	for(i=0; i < 16 ; i++)
++	{
++		_irqL irqL;
++		_list	*phead, *plist;
++		union recv_frame *prframe;
++		_queue *ppending_recvframe_queue;
++		_queue *pfree_recv_queue = &padapter->recvpriv.free_recv_queue;
++	
++		preorder_ctrl = &psta->recvreorder_ctrl[i];
++		
++		_cancel_timer_ex(&preorder_ctrl->reordering_ctrl_timer);		
++
++		
++		ppending_recvframe_queue = &preorder_ctrl->pending_recvframe_queue;
++
++		_enter_critical_bh(&ppending_recvframe_queue->lock, &irqL);
++
++		phead = 	get_list_head(ppending_recvframe_queue);
++		plist = get_next(phead);
++		
++		while(!rtw_is_list_empty(phead))
++		{	
++			prframe = LIST_CONTAINOR(plist, union recv_frame, u);
++			
++			plist = get_next(plist);
++			
++			rtw_list_delete(&(prframe->u.hdr.list));
++
++			rtw_free_recvframe(prframe, pfree_recv_queue);
++		}
++
++		_exit_critical_bh(&ppending_recvframe_queue->lock, &irqL);
++		
++	}
++
++
++#ifdef CONFIG_AP_MODE
++
++/*
++	_enter_critical_bh(&pstapriv->asoc_list_lock, &irqL0);
++	rtw_list_delete(&psta->asoc_list);	
++	_exit_critical_bh(&pstapriv->asoc_list_lock, &irqL0);
++*/
++	_enter_critical_bh(&pstapriv->auth_list_lock, &irqL0);
++	if (!rtw_is_list_empty(&psta->auth_list)) {
++		rtw_list_delete(&psta->auth_list);
++		pstapriv->auth_list_cnt--;
++	}
++	_exit_critical_bh(&pstapriv->auth_list_lock, &irqL0);
++	
++	psta->expire_to = 0;
++	
++	psta->sleepq_ac_len = 0;
++	psta->qos_info = 0;
++
++	psta->max_sp_len = 0;
++	psta->uapsd_bk = 0;
++	psta->uapsd_be = 0;
++	psta->uapsd_vi = 0;
++	psta->uapsd_vo = 0;
++
++	psta->has_legacy_ac = 0;
++
++#ifdef CONFIG_NATIVEAP_MLME
++	
++	pstapriv->sta_dz_bitmap &=~BIT(psta->aid);
++	pstapriv->tim_bitmap &=~BIT(psta->aid);	
++
++	//rtw_indicate_sta_disassoc_event(padapter, psta);
++
++	if ((psta->aid >0)&&(pstapriv->sta_aid[psta->aid - 1] == psta))
++	{
++		pstapriv->sta_aid[psta->aid - 1] = NULL;
++		psta->aid = 0;
++	}	
++
++#endif	// CONFIG_NATIVEAP_MLME	
++
++#ifdef CONFIG_TX_MCAST2UNI
++	psta->under_exist_checking = 0;
++#endif	// CONFIG_TX_MCAST2UNI
++
++#endif	// CONFIG_AP_MODE	
++
++	 _rtw_spinlock_free(&psta->lock);
++
++	//_enter_critical_bh(&(pfree_sta_queue->lock), &irqL0);
++	rtw_list_insert_tail(&psta->list, get_list_head(pfree_sta_queue));
++	//_exit_critical_bh(&(pfree_sta_queue->lock), &irqL0);
++
++exit:
++	
++_func_exit_;	
++
++	return _SUCCESS;
++	
++}
++
++// free all stainfo which in sta_hash[all]
++void rtw_free_all_stainfo(_adapter *padapter)
++{
++	_irqL	 irqL;
++	_list	*plist, *phead;
++	s32	index;
++	struct sta_info *psta = NULL;
++	struct	sta_priv *pstapriv = &padapter->stapriv;
++	struct sta_info* pbcmc_stainfo =rtw_get_bcmc_stainfo( padapter);
++	
++_func_enter_;	
++
++	if(pstapriv->asoc_sta_count==1)
++		goto exit;
++
++	_enter_critical_bh(&pstapriv->sta_hash_lock, &irqL);
++
++	for(index=0; index< NUM_STA; index++)
++	{
++		phead = &(pstapriv->sta_hash[index]);
++		plist = get_next(phead);
++		
++		while ((rtw_end_of_queue_search(phead, plist)) == _FALSE)
++		{
++			psta = LIST_CONTAINOR(plist, struct sta_info ,hash_list);
++
++			plist = get_next(plist);
++
++			if(pbcmc_stainfo!=psta)					
++				rtw_free_stainfo(padapter , psta);
++			
++		}
++	}
++	
++	_exit_critical_bh(&pstapriv->sta_hash_lock, &irqL);
++	
++exit:	
++	
++_func_exit_;	
++
++}
++
++/* any station allocated can be searched by hash list */
++struct sta_info *rtw_get_stainfo(struct sta_priv *pstapriv, u8 *hwaddr)
++{
++
++	_irqL	 irqL;
++
++	_list	*plist, *phead;
++
++	struct sta_info *psta = NULL;
++	
++	u32	index;
++
++	u8 *addr;
++
++	u8 bc_addr[ETH_ALEN] = {0xff,0xff,0xff,0xff,0xff,0xff};
++
++_func_enter_;
++
++	if(hwaddr==NULL)
++		return NULL;
++		
++	if(IS_MCAST(hwaddr))
++	{
++		addr = bc_addr;
++	}
++	else
++	{
++		addr = hwaddr;
++	}
++
++	index = wifi_mac_hash(addr);
++
++	_enter_critical_bh(&pstapriv->sta_hash_lock, &irqL);
++	
++	phead = &(pstapriv->sta_hash[index]);
++	plist = get_next(phead);
++
++
++	while ((rtw_end_of_queue_search(phead, plist)) == _FALSE)
++	{
++	
++		psta = LIST_CONTAINOR(plist, struct sta_info, hash_list);
++		
++		if ((_rtw_memcmp(psta->hwaddr, addr, ETH_ALEN))== _TRUE) 
++		{ // if found the matched address
++			break;
++		}
++		psta=NULL;
++		plist = get_next(plist);
++	}
++
++	_exit_critical_bh(&pstapriv->sta_hash_lock, &irqL);
++_func_exit_;	
++	return psta;
++	
++}
++
++u32 rtw_init_bcmc_stainfo(_adapter* padapter)
++{
++
++	struct sta_info 	*psta;
++	struct tx_servq	*ptxservq;
++	u32 res=_SUCCESS;
++	NDIS_802_11_MAC_ADDRESS	bcast_addr= {0xff,0xff,0xff,0xff,0xff,0xff};
++	
++	struct	sta_priv *pstapriv = &padapter->stapriv;
++	//_queue	*pstapending = &padapter->xmitpriv.bm_pending; 
++	
++_func_enter_;
++
++	psta = rtw_alloc_stainfo(pstapriv, bcast_addr);
++	
++	if(psta==NULL){
++		res=_FAIL;
++		RT_TRACE(_module_rtl871x_sta_mgt_c_,_drv_err_,("rtw_alloc_stainfo fail"));
++		goto exit;
++	}
++
++	// default broadcast & multicast use macid 1
++	psta->mac_id = 1;
++
++	ptxservq= &(psta->sta_xmitpriv.be_q);
++
++/*
++	_enter_critical(&pstapending->lock, &irqL0);
++
++	if (rtw_is_list_empty(&ptxservq->tx_pending))
++		rtw_list_insert_tail(&ptxservq->tx_pending, get_list_head(pstapending));
++
++	_exit_critical(&pstapending->lock, &irqL0);
++*/
++	
++exit:
++_func_exit_;		
++	return _SUCCESS;
++
++}
++
++
++struct sta_info* rtw_get_bcmc_stainfo(_adapter* padapter)
++{
++	struct sta_info 	*psta;
++	struct sta_priv 	*pstapriv = &padapter->stapriv;
++	u8 bc_addr[ETH_ALEN] = {0xff,0xff,0xff,0xff,0xff,0xff};
++_func_enter_;
++	 psta = rtw_get_stainfo(pstapriv, bc_addr);
++_func_exit_;		 
++	return psta;
++
++}
++
++u8 rtw_access_ctrl(_adapter *padapter, u8 *mac_addr)
++{
++	u8 res = _TRUE;
++#ifdef  CONFIG_AP_MODE
++	_irqL irqL;
++	_list	*plist, *phead;
++	struct rtw_wlan_acl_node *paclnode;
++	u8 match = _FALSE;
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	struct wlan_acl_pool *pacl_list = &pstapriv->acl_list;
++	_queue	*pacl_node_q =&pacl_list->acl_node_q;
++	
++	_enter_critical_bh(&(pacl_node_q->lock), &irqL);
++	phead = get_list_head(pacl_node_q);
++	plist = get_next(phead);		
++	while ((rtw_end_of_queue_search(phead, plist)) == _FALSE)
++	{
++		paclnode = LIST_CONTAINOR(plist, struct rtw_wlan_acl_node, list);
++		plist = get_next(plist);
++
++		if(_rtw_memcmp(paclnode->addr, mac_addr, ETH_ALEN))
++		{
++			if(paclnode->valid == _TRUE)
++			{
++				match = _TRUE;
++				break;
++			}
++		}		
++	}	
++	_exit_critical_bh(&(pacl_node_q->lock), &irqL);
++	
++
++	if(pacl_list->mode == 1)//accept unless in deny list
++	{
++		res = (match == _TRUE) ?  _FALSE:_TRUE;
++	}	
++	else if(pacl_list->mode == 2)//deny unless in accept list
++	{
++		res = (match == _TRUE) ?  _TRUE:_FALSE;
++	}
++	else
++	{
++		 res = _TRUE;
++	}		
++	
++#endif
++
++	return res;
++
++}
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_tdls.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_tdls.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_tdls.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_tdls.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,2941 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _RTW_TDLS_C_
++
++#include <drv_types.h>
++#include <ethernet.h>
++#include <rtw_tdls.h>
++#include <wifi.h>
++
++#ifdef CONFIG_TDLS
++extern unsigned char MCS_rate_2R[16];
++extern unsigned char MCS_rate_1R[16];
++extern void process_wmmps_data(_adapter *padapter, union recv_frame *precv_frame);
++extern s32 rtw_dump_xframe(_adapter *padapter, struct xmit_frame *pxmitframe);
++
++void rtw_reset_tdls_info(_adapter* padapter)
++{
++	struct tdls_info *ptdlsinfo = &padapter->tdlsinfo;
++
++	ptdlsinfo->ap_prohibited = _FALSE;
++	ptdlsinfo->setup_state = TDLS_STATE_NONE;
++	ptdlsinfo->sta_cnt = 0;
++	ptdlsinfo->sta_maximum = _FALSE;
++	ptdlsinfo->macid_index= 6;
++	ptdlsinfo->clear_cam= 0;
++	ptdlsinfo->ch_sensing = 0;
++	ptdlsinfo->cur_channel = 0;
++	ptdlsinfo->candidate_ch = 1;	//when inplement channel switching, default candidate channel is 1
++	ptdlsinfo->watchdog_count = 0;
++	ptdlsinfo->dev_discovered = 0;
++
++#ifdef CONFIG_WFD
++	ptdlsinfo->wfd_info = &padapter->wfd_info;
++#endif //CONFIG_WFD
++}
++
++int rtw_init_tdls_info(_adapter* padapter)
++{
++	int	res = _SUCCESS;
++	struct tdls_info *ptdlsinfo = &padapter->tdlsinfo;
++
++	ptdlsinfo->enable = 1;
++	rtw_reset_tdls_info(padapter);
++
++	_rtw_spinlock_init(&ptdlsinfo->cmd_lock);
++	_rtw_spinlock_init(&ptdlsinfo->hdl_lock);
++
++	return res;
++
++}
++
++void rtw_free_tdls_info(struct tdls_info *ptdlsinfo)
++{
++	_rtw_spinlock_free(&ptdlsinfo->cmd_lock);
++	_rtw_spinlock_free(&ptdlsinfo->hdl_lock);
++
++	_rtw_memset(ptdlsinfo, 0, sizeof(struct tdls_info) );
++
++}
++
++void issue_nulldata_to_TDLS_peer_STA(_adapter *padapter, struct sta_info *ptdls_sta, unsigned int power_mode)
++{
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	unsigned char					*pframe;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	unsigned short				*fctrl;
++	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);
++
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++//	SetToDs(fctrl);
++	if (power_mode)
++	{
++		SetPwrMgt(fctrl);
++	}
++
++	_rtw_memcpy(pwlanhdr->addr1, ptdls_sta->hwaddr, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr3, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN);
++
++	ptdls_sta->sta_xmitpriv.txseq_tid[pattrib->priority]++;
++	ptdls_sta->sta_xmitpriv.txseq_tid[pattrib->priority] &= 0xFFF;
++	pattrib->seqnum = ptdls_sta->sta_xmitpriv.txseq_tid[pattrib->priority];
++	SetSeqNum(pwlanhdr, pattrib->seqnum);
++
++	SetFrameSubType(pframe, WIFI_DATA_NULL);
++
++	pframe += sizeof(struct rtw_ieee80211_hdr_3addr);
++	pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr);
++
++	pattrib->last_txcmdsz = pattrib->pktlen;
++	dump_mgntframe(padapter, pmgntframe);
++
++	return;
++}
++
++s32 update_tdls_attrib(_adapter *padapter, struct pkt_attrib *pattrib)
++{
++
++	struct sta_info *psta = NULL;
++	struct sta_priv		*pstapriv = &padapter->stapriv;
++	struct security_priv	*psecuritypriv = &padapter->securitypriv;
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	struct qos_priv		*pqospriv= &pmlmepriv->qospriv;
++
++	s32 res=_SUCCESS;
++	sint bmcast;
++
++	bmcast = IS_MCAST(pattrib->ra);
++	
++	psta = rtw_get_stainfo(pstapriv, pattrib->ra);
++	if (psta == NULL)	{ 
++		res =_FAIL;
++		goto exit;
++	}
++
++	pattrib->mac_id = psta->mac_id;
++				
++	pattrib->psta = psta;
++
++	pattrib->ack_policy = 0;
++	// get ether_hdr_len
++	pattrib->pkt_hdrlen = ETH_HLEN;//(pattrib->ether_type == 0x8100) ? (14 + 4 ): 14; //vlan tag
++
++	if (pqospriv->qos_option &&  psta->qos_option) {
++		pattrib->priority = 1;	//tdls management frame should be AC_BK
++		pattrib->hdrlen = WLAN_HDR_A3_QOS_LEN;
++		pattrib->subtype = WIFI_QOS_DATA_TYPE;
++	} else {
++		pattrib->hdrlen = WLAN_HDR_A3_LEN;
++		pattrib->subtype = WIFI_DATA_TYPE;	
++		pattrib->priority = 0;
++	}
++
++	if (psta->ieee8021x_blocked == _TRUE)
++	{
++		pattrib->encrypt = 0;
++	}
++	else
++	{
++		GET_ENCRY_ALGO(psecuritypriv, psta, pattrib->encrypt, bmcast);
++
++		switch(psecuritypriv->dot11AuthAlgrthm)
++		{
++			case dot11AuthAlgrthm_Open:
++			case dot11AuthAlgrthm_Shared:
++			case dot11AuthAlgrthm_Auto:				
++				pattrib->key_idx = (u8)psecuritypriv->dot11PrivacyKeyIndex;
++				break;
++			case dot11AuthAlgrthm_8021X:
++				pattrib->key_idx = 0;
++				break;
++			default:
++				pattrib->key_idx = 0;
++				break;
++		}
++	}
++
++	switch (pattrib->encrypt)
++	{
++		case _WEP40_:
++		case _WEP104_:
++			pattrib->iv_len = 4;
++			pattrib->icv_len = 4;
++			break;
++		case _TKIP_:
++			pattrib->iv_len = 8;
++			pattrib->icv_len = 4;
++			if(padapter->securitypriv.busetkipkey==_FAIL)
++			{
++				res =_FAIL;
++				goto exit;
++			}
++			break;			
++		case _AES_:
++			pattrib->iv_len = 8;
++			pattrib->icv_len = 8;
++			break;
++		default:
++			pattrib->iv_len = 0;
++			pattrib->icv_len = 0;
++			break;
++	}
++
++	if (pattrib->encrypt &&
++	    ((padapter->securitypriv.sw_encrypt == _TRUE) || (psecuritypriv->hw_decrypted == _FALSE)))
++	{
++		pattrib->bswenc = _TRUE;
++	} else {
++		pattrib->bswenc = _FALSE;
++	}
++
++	//qos_en, ht_en, init rate, ,bw, ch_offset, sgi
++	pattrib->qos_en = psta->qos_option;
++	pattrib->ht_en = psta->htpriv.ht_option;
++	pattrib->raid = psta->raid;
++	pattrib->bwmode = psta->htpriv.bwmode;
++	pattrib->ch_offset = psta->htpriv.ch_offset;
++	pattrib->sgi= psta->htpriv.sgi;
++	pattrib->ampdu_en = _FALSE;
++	
++	//if(pattrib->ht_en && psta->htpriv.ampdu_enable)
++	//{
++	//	if(psta->htpriv.agg_enable_bitmap & BIT(pattrib->priority))
++	//		pattrib->ampdu_en = _TRUE;
++	//}	
++
++exit:
++
++	return res;
++}
++
++void free_tdls_sta(_adapter *padapter, struct sta_info *ptdls_sta)
++{
++	struct tdls_info *ptdlsinfo = &padapter->tdlsinfo;
++   	struct sta_priv *pstapriv = &padapter->stapriv;
++	_irqL irqL;
++	
++	//free peer sta_info
++	_enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL);
++	if(ptdlsinfo->sta_cnt != 0)
++		ptdlsinfo->sta_cnt--;
++	_exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL);
++	if( ptdlsinfo->sta_cnt < (NUM_STA - 2) )	// -2: AP + BC/MC sta
++	{
++		ptdlsinfo->sta_maximum = _FALSE;
++		_rtw_memset( &ptdlsinfo->ss_record, 0x00, sizeof(struct tdls_ss_record) );
++	}
++	//ready to clear cam
++	if(ptdls_sta->mac_id!=0){
++		ptdlsinfo->clear_cam=ptdls_sta->mac_id;
++		rtw_setstakey_cmd(padapter, (u8 *)ptdls_sta, _TRUE);
++	}
++
++	if(ptdlsinfo->sta_cnt==0){
++		rtw_tdls_cmd(padapter, myid(&(padapter->eeprompriv)), TDLS_RS_RCR);
++		ptdlsinfo->setup_state=TDLS_STATE_NONE;
++	}
++	else
++		DBG_871X("Remain tdls sta:%02x\n", ptdlsinfo->sta_cnt);
++
++	rtw_free_stainfo(padapter,  ptdls_sta);
++	
++}
++
++// cam entry will be the same as mac_id
++void rtw_tdls_set_mac_id(struct tdls_info *ptdlsinfo, struct sta_info *ptdls_sta)
++{
++	if(ptdls_sta->mac_id==0)
++	{
++		ptdls_sta->mac_id = ptdlsinfo->macid_index;
++		if( (++ptdlsinfo->macid_index) > (NUM_STA -2) )
++			ptdlsinfo->macid_index= TDLS_INI_MACID_ENTRY;
++	}
++}
++
++//TDLS encryption(if needed) will always be CCMP
++void rtw_tdls_set_key(_adapter *adapter, struct rx_pkt_attrib *prx_pkt_attrib, struct sta_info *ptdls_sta)
++{
++	if(prx_pkt_attrib->encrypt)
++	{
++		ptdls_sta->dot118021XPrivacy=_AES_;
++		rtw_setstakey_cmd(adapter, (u8*)ptdls_sta, _TRUE);
++	}
++}
++
++void rtw_tdls_process_ht_cap(_adapter *adapter, struct sta_info *ptdls_sta, u8 *data, u8 Length)
++{
++	/* save HT capabilities in the sta object */
++	_rtw_memset(&ptdls_sta->htpriv.ht_cap, 0, sizeof(struct rtw_ieee80211_ht_cap));
++	if (data && Length >= sizeof(struct rtw_ieee80211_ht_cap) )
++	{
++		ptdls_sta->flags |= WLAN_STA_HT;
++		
++		ptdls_sta->flags |= WLAN_STA_WME;
++		
++		_rtw_memcpy(&ptdls_sta->htpriv.ht_cap, data, sizeof(struct rtw_ieee80211_ht_cap));			
++		
++	} else
++		ptdls_sta->flags &= ~WLAN_STA_HT;
++
++	if(ptdls_sta->flags & WLAN_STA_HT)
++	{
++		if(adapter->registrypriv.ht_enable == _TRUE)
++		{
++			ptdls_sta->htpriv.ht_option = _TRUE;
++		}
++		else
++		{
++			ptdls_sta->htpriv.ht_option = _FALSE;
++			ptdls_sta->stat_code = _STATS_FAILURE_;
++		}
++	}
++
++	//HT related cap
++	if(ptdls_sta->htpriv.ht_option)
++	{
++		//check if sta supports rx ampdu
++		if(adapter->registrypriv.ampdu_enable==1)
++			ptdls_sta->htpriv.ampdu_enable = _TRUE;
++
++		//check if sta support s Short GI
++		if(ptdls_sta->htpriv.ht_cap.cap_info & cpu_to_le16(IEEE80211_HT_CAP_SGI_20|IEEE80211_HT_CAP_SGI_40))
++		{
++			ptdls_sta->htpriv.sgi = _TRUE;
++		}
++
++		// bwmode would still followed AP's setting
++		if(ptdls_sta->htpriv.ht_cap.cap_info & cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH))
++		{
++			ptdls_sta->htpriv.bwmode = adapter->mlmeextpriv.cur_bwmode;
++			ptdls_sta->htpriv.ch_offset = adapter->mlmeextpriv.cur_ch_offset;
++		}
++	}
++}
++
++u8 *rtw_tdls_set_ht_cap(_adapter *padapter, u8 *pframe, struct pkt_attrib *pattrib)
++{
++	struct rtw_ieee80211_ht_cap ht_capie;
++	u8 rf_type;
++
++	//HT capabilities
++	_rtw_memset(&ht_capie, 0, sizeof(struct rtw_ieee80211_ht_cap));
++
++	ht_capie.cap_info = IEEE80211_HT_CAP_SUP_WIDTH |IEEE80211_HT_CAP_SGI_20 |IEEE80211_HT_CAP_SM_PS |
++						IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_TX_STBC |IEEE80211_HT_CAP_DSSSCCK40;
++
++	{
++		u32 rx_packet_offset, max_recvbuf_sz;
++		rtw_hal_get_def_var(padapter, HAL_DEF_RX_PACKET_OFFSET, &rx_packet_offset);
++		rtw_hal_get_def_var(padapter, HAL_DEF_MAX_RECVBUF_SZ, &max_recvbuf_sz);
++		if(max_recvbuf_sz-rx_packet_offset>(8191-256))
++			ht_capie.cap_info = ht_capie.cap_info |IEEE80211_HT_CAP_MAX_AMSDU;
++	}
++	
++	ht_capie.ampdu_params_info = (IEEE80211_HT_CAP_AMPDU_FACTOR&0x03);
++
++	rtw_hal_get_hwreg(padapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type));
++	switch(rf_type)
++	{
++		case RF_1T1R:
++			ht_capie.cap_info |= 0x0100;//RX STBC One spatial stream
++			_rtw_memcpy(ht_capie.supp_mcs_set, MCS_rate_1R, 16);
++			break;
++
++		case RF_2T2R:
++		case RF_1T2R:
++		default:
++			ht_capie.cap_info|= 0x0200;//RX STBC two spatial stream
++			_rtw_memcpy(ht_capie.supp_mcs_set, MCS_rate_2R, 16);
++			break;
++	}
++			
++	return(rtw_set_ie(pframe, _HT_CAPABILITY_IE_, 
++						sizeof(struct rtw_ieee80211_ht_cap), (unsigned char*)&ht_capie, &(pattrib->pktlen)));
++}
++
++u8 *rtw_tdls_set_sup_ch(struct mlme_ext_priv *pmlmeext, u8 *pframe, struct pkt_attrib *pattrib)
++{
++	u8 sup_ch[ 30 * 2 ] = { 0x00 }, sup_ch_idx = 0, idx_5g = 2;	//For supported channel
++	do{
++		if( pmlmeext->channel_set[sup_ch_idx].ChannelNum <= 14 )
++		{
++			sup_ch[0] = 1;	//First channel number
++			sup_ch[1] = pmlmeext->channel_set[sup_ch_idx].ChannelNum;	//Number of channel
++		}
++		else
++		{
++			sup_ch[idx_5g++] = pmlmeext->channel_set[sup_ch_idx].ChannelNum;
++			sup_ch[idx_5g++] = 1;
++		}
++		
++		sup_ch_idx++;
++	}
++	while( pmlmeext->channel_set[sup_ch_idx].ChannelNum != 0 );
++	return(rtw_set_ie(pframe, _SUPPORTED_CH_IE_, idx_5g, sup_ch, &(pattrib->pktlen)));
++}
++
++#ifdef CONFIG_WFD
++void rtw_tdls_process_wfd_ie(struct tdls_info *ptdlsinfo, u8 *ptr, u8 length)
++{
++	u8	wfd_ie[ 128 ] = { 0x00 };
++	u32	wfd_ielen = 0;
++	u32	wfd_offset = 0;
++	//	Try to get the TCP port information when receiving the negotiation response.
++	//
++
++	wfd_offset = 0;
++	wfd_offset = rtw_get_wfd_ie( ptr + wfd_offset, length - wfd_offset, wfd_ie, &wfd_ielen );
++	while( wfd_offset )
++	{
++		u8	attr_content[ 10 ] = { 0x00 };
++		u32	attr_contentlen = 0;
++		int	i;
++
++		DBG_871X( "[%s] WFD IE Found!!\n", __FUNCTION__ );
++		rtw_get_wfd_attr_content( wfd_ie, wfd_ielen, WFD_ATTR_DEVICE_INFO, attr_content, &attr_contentlen);
++		if ( attr_contentlen )
++		{
++			ptdlsinfo->wfd_info->peer_rtsp_ctrlport = RTW_GET_BE16( attr_content + 2 );
++			DBG_871X( "[%s] Peer PORT NUM = %d\n", __FUNCTION__, ptdlsinfo->wfd_info->peer_rtsp_ctrlport );
++		}
++
++		_rtw_memset( attr_content, 0x00, 10);
++		attr_contentlen = 0;
++		rtw_get_wfd_attr_content( wfd_ie, wfd_ielen, WFD_ATTR_LOCAL_IP_ADDR, attr_content, &attr_contentlen);
++		if ( attr_contentlen )
++		{
++			_rtw_memcpy(ptdlsinfo->wfd_info->peer_ip_address, ( attr_content + 1 ), 4);
++			DBG_871X( "[%s] Peer IP = %02u.%02u.%02u.%02u \n", __FUNCTION__, 
++				ptdlsinfo->wfd_info->peer_ip_address[0], ptdlsinfo->wfd_info->peer_ip_address[1],
++				ptdlsinfo->wfd_info->peer_ip_address[2], ptdlsinfo->wfd_info->peer_ip_address[3]
++				);
++		}
++		wfd_offset = rtw_get_wfd_ie( ptr + wfd_offset, length - wfd_offset, wfd_ie, &wfd_ielen );
++	}
++}
++
++void issue_tunneled_probe_req(_adapter *padapter)
++{
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
++	u8 baddr[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; 
++
++	DBG_871X("[%s]\n", __FUNCTION__);
++	
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++	
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++
++	pmgntframe->frame_tag = DATA_FRAMETAG;
++	pattrib->ether_type = 0x890d;
++	pattrib->pctrl =0;
++
++	_rtw_memcpy(pattrib->dst, baddr, ETH_ALEN);
++	
++	_rtw_memcpy(pattrib->src, myid(&(padapter->eeprompriv)), ETH_ALEN);
++
++	_rtw_memcpy(pattrib->ra, get_bssid(pmlmepriv), ETH_ALEN);
++	_rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN);
++
++	update_tdls_attrib(padapter, pattrib);
++	pattrib->qsel=pattrib->priority;
++	if (rtw_xmit_tdls_coalesce(padapter, pmgntframe, TUNNELED_PROBE_REQ) != _SUCCESS) {
++		rtw_free_xmitbuf(pxmitpriv, pmgntframe->pxmitbuf);
++		rtw_free_xmitframe(pxmitpriv, pmgntframe);
++		goto exit;
++	}
++	rtw_dump_xframe(padapter, pmgntframe);
++
++exit:
++
++	return;
++}
++
++void issue_tunneled_probe_rsp(_adapter *padapter, union recv_frame *precv_frame)
++{
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
++	struct rx_pkt_attrib	*rx_pkt_pattrib = &precv_frame->u.hdr.attrib;
++
++	DBG_871X("[%s]\n", __FUNCTION__);
++	
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++	
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++
++	pmgntframe->frame_tag = DATA_FRAMETAG;
++	pattrib->ether_type = 0x890d;
++	pattrib->pctrl =0;
++
++	_rtw_memcpy(pattrib->dst, rx_pkt_pattrib->src, ETH_ALEN);
++	
++	_rtw_memcpy(pattrib->src, myid(&(padapter->eeprompriv)), ETH_ALEN);
++
++	_rtw_memcpy(pattrib->ra, get_bssid(pmlmepriv), ETH_ALEN);
++	_rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN);
++
++	update_tdls_attrib(padapter, pattrib);
++	pattrib->qsel=pattrib->priority;
++	if (rtw_xmit_tdls_coalesce(padapter, pmgntframe, TUNNELED_PROBE_RSP) != _SUCCESS) {
++		rtw_free_xmitbuf(pxmitpriv, pmgntframe->pxmitbuf);
++		rtw_free_xmitframe(pxmitpriv, pmgntframe);
++		goto exit;
++	}
++	rtw_dump_xframe(padapter, pmgntframe);
++
++exit:
++
++	return;
++}
++#endif //CONFIG_WFD
++
++void issue_tdls_setup_req(_adapter *padapter, u8 *mac_addr)
++{
++	struct tdls_info	*ptdlsinfo = &padapter->tdlsinfo;
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
++   	struct sta_priv *pstapriv = &padapter->stapriv;
++	struct sta_info *ptdls_sta= NULL;
++	_irqL irqL;
++	static u8 dialogtoken = 0;
++	u32 timeout_interval= TPK_RESEND_COUNT * 1000;	//retry timer should set at least 301 sec, using TPK_count counting 301 times.
++
++	if(ptdlsinfo->ap_prohibited == _TRUE)
++		goto exit;
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++	
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++
++	pmgntframe->frame_tag = DATA_FRAMETAG;
++	pattrib->ether_type = 0x890d;
++	pattrib->pctrl =0;		
++
++	_rtw_memcpy(pattrib->dst, mac_addr, ETH_ALEN);
++	_rtw_memcpy(pattrib->src, myid(&(padapter->eeprompriv)), ETH_ALEN);
++
++	_rtw_memcpy(pattrib->ra, get_bssid(pmlmepriv), ETH_ALEN);
++	_rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN);
++
++	update_tdls_attrib(padapter, pattrib);
++
++	//init peer sta_info
++	ptdls_sta = rtw_get_stainfo(pstapriv, mac_addr);
++	if(ptdls_sta==NULL)
++	{
++		ptdls_sta = rtw_alloc_stainfo(pstapriv, mac_addr);
++		if(ptdls_sta)
++		{
++			_enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL);	
++			if(!(ptdls_sta->tdls_sta_state & TDLS_LINKED_STATE))
++				ptdlsinfo->sta_cnt++;
++			_exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL);	
++			if( ptdlsinfo->sta_cnt == (NUM_STA - 2) )	// -2: AP + BC/MC sta
++			{
++				ptdlsinfo->sta_maximum  = _TRUE;
++			}
++		}
++		else
++		{
++			rtw_free_xmitbuf(pxmitpriv,pmgntframe->pxmitbuf);
++			rtw_free_xmitframe(pxmitpriv, pmgntframe);
++			goto exit;
++		}
++	}
++	
++	if(ptdls_sta){	
++		ptdls_sta->tdls_sta_state |= TDLS_RESPONDER_STATE;
++		//for tdls; ptdls_sta->aid is used to fill dialogtoken
++		ptdls_sta->dialog = dialogtoken;
++		dialogtoken = (dialogtoken+1)%256;
++		ptdls_sta->TDLS_PeerKey_Lifetime = timeout_interval;
++		_set_timer( &ptdls_sta->handshake_timer, TDLS_HANDSHAKE_TIME );
++	}
++
++	pattrib->qsel=pattrib->priority;
++	if(rtw_xmit_tdls_coalesce(padapter, pmgntframe, TDLS_SETUP_REQUEST) !=_SUCCESS ){
++		rtw_free_xmitbuf(pxmitpriv,pmgntframe->pxmitbuf);
++		rtw_free_xmitframe(pxmitpriv, pmgntframe);
++		goto exit;
++	}
++	rtw_dump_xframe(padapter, pmgntframe);
++
++exit:
++
++	return;
++}
++
++void issue_tdls_teardown(_adapter *padapter, u8 *mac_addr)
++{
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	struct sta_info	*ptdls_sta=NULL;
++	_irqL irqL;
++
++	ptdls_sta = rtw_get_stainfo(pstapriv, mac_addr);
++	if(ptdls_sta==NULL){
++		DBG_871X("issue tdls teardown unsuccessful\n");
++		return;
++	}else{
++		ptdls_sta->tdls_sta_state=TDLS_STATE_NONE;
++	}
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++	
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++
++	pmgntframe->frame_tag = DATA_FRAMETAG;
++	pattrib->ether_type = 0x890d;
++	pattrib->pctrl =0;
++
++	_rtw_memcpy(pattrib->dst, mac_addr, ETH_ALEN);
++	_rtw_memcpy(pattrib->src, myid(&(padapter->eeprompriv)), ETH_ALEN);
++
++	_rtw_memcpy(pattrib->ra, get_bssid(pmlmepriv), ETH_ALEN);
++	_rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN);
++
++	update_tdls_attrib(padapter, pattrib);
++	pattrib->qsel=pattrib->priority;
++	if (rtw_xmit_tdls_coalesce(padapter, pmgntframe, TDLS_TEARDOWN) != _SUCCESS) {
++		rtw_free_xmitbuf(pxmitpriv, pmgntframe->pxmitbuf);
++		rtw_free_xmitframe(pxmitpriv, pmgntframe);
++		goto exit;
++	}
++	rtw_dump_xframe(padapter, pmgntframe);
++
++	if(ptdls_sta->tdls_sta_state & TDLS_CH_SWITCH_ON_STATE){
++		rtw_tdls_cmd(padapter, ptdls_sta->hwaddr, TDLS_CS_OFF);
++	}
++	
++	if( ptdls_sta->timer_flag == 1 )
++	{
++		_enter_critical_bh(&(padapter->tdlsinfo.hdl_lock), &irqL);
++		ptdls_sta->timer_flag = 2;
++		_exit_critical_bh(&(padapter->tdlsinfo.hdl_lock), &irqL);
++	}
++	else
++		rtw_tdls_cmd(padapter, mac_addr, TDLS_FREE_STA );
++
++
++exit:
++
++	return;
++}
++
++void issue_tdls_dis_req(_adapter *padapter, u8 *mac_addr)
++{
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
++	u8 baddr[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; 
++	
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++	
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++
++	pmgntframe->frame_tag = DATA_FRAMETAG;
++	pattrib->ether_type = 0x890d;
++	pattrib->pctrl =0;
++
++	if(mac_addr == NULL)
++		_rtw_memcpy(pattrib->dst, baddr, ETH_ALEN);
++	else
++		_rtw_memcpy(pattrib->dst, mac_addr, ETH_ALEN);
++	
++	_rtw_memcpy(pattrib->src, myid(&(padapter->eeprompriv)), ETH_ALEN);
++
++	_rtw_memcpy(pattrib->ra, get_bssid(pmlmepriv), ETH_ALEN);
++	_rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN);
++
++	update_tdls_attrib(padapter, pattrib);
++	pattrib->qsel=pattrib->priority;
++	if (rtw_xmit_tdls_coalesce(padapter, pmgntframe, TDLS_DISCOVERY_REQUEST) != _SUCCESS) {
++		rtw_free_xmitbuf(pxmitpriv, pmgntframe->pxmitbuf);
++		rtw_free_xmitframe(pxmitpriv, pmgntframe);
++		goto exit;
++	}
++	rtw_dump_xframe(padapter, pmgntframe);
++	DBG_871X("issue tdls dis req\n");
++
++exit:
++
++	return;
++}
++
++void issue_tdls_setup_rsp(_adapter *padapter, union recv_frame *precv_frame)
++{
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct rx_pkt_attrib	*rx_pkt_pattrib = &precv_frame->u.hdr.attrib;
++	_irqL irqL;
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++	
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++
++	pmgntframe->frame_tag = DATA_FRAMETAG;
++	pattrib->ether_type = 0x890d;
++	pattrib->pctrl =0;
++
++	_rtw_memcpy(pattrib->dst, rx_pkt_pattrib->src, ETH_ALEN);
++	_rtw_memcpy(pattrib->src, myid(&(padapter->eeprompriv)), ETH_ALEN);
++
++	_rtw_memcpy(pattrib->ra, rx_pkt_pattrib->bssid, ETH_ALEN);
++	_rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN);
++
++	update_tdls_attrib(padapter, pattrib);
++	pattrib->qsel=pattrib->priority;
++	if (rtw_xmit_tdls_coalesce(padapter, pmgntframe, TDLS_SETUP_RESPONSE) != _SUCCESS) {
++		rtw_free_xmitbuf(pxmitpriv, pmgntframe->pxmitbuf);
++		rtw_free_xmitframe(pxmitpriv, pmgntframe);
++		goto exit;
++	}
++	rtw_dump_xframe(padapter, pmgntframe);
++
++exit:
++
++	return;
++
++}
++
++void issue_tdls_setup_cfm(_adapter *padapter, union recv_frame *precv_frame)
++{
++	struct tdls_info *ptdlsinfo = &padapter->tdlsinfo;
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
++	struct sta_info		*ptdls_sta=NULL;
++	_irqL irqL;
++
++	struct rx_pkt_attrib	*rx_pkt_pattrib = & precv_frame->u.hdr.attrib;
++	
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++	
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++
++	pmgntframe->frame_tag = DATA_FRAMETAG;
++	pattrib->ether_type = 0x890d;
++	pattrib->pctrl =0;
++
++	_rtw_memcpy(pattrib->dst, rx_pkt_pattrib->src, ETH_ALEN);
++	_rtw_memcpy(pattrib->src, myid(&(padapter->eeprompriv)), ETH_ALEN);
++
++	_rtw_memcpy(pattrib->ra, rx_pkt_pattrib->bssid, ETH_ALEN);
++	_rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN);
++
++	update_tdls_attrib(padapter, pattrib);
++	pattrib->qsel=pattrib->priority;
++	if (rtw_xmit_tdls_coalesce(padapter, pmgntframe, TDLS_SETUP_CONFIRM) != _SUCCESS) {
++		rtw_free_xmitbuf(pxmitpriv, pmgntframe->pxmitbuf);
++		rtw_free_xmitframe(pxmitpriv, pmgntframe);
++		goto exit;		
++	}
++
++	rtw_dump_xframe(padapter, pmgntframe);
++
++exit:
++
++	return;
++
++}
++
++//TDLS Discovery Response frame is a management action frame
++void issue_tdls_dis_rsp(_adapter *padapter, union recv_frame *precv_frame, u8 dialog)
++{
++	struct xmit_frame		*pmgntframe;
++	struct pkt_attrib		*pattrib;
++	unsigned char			*pframe;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	unsigned short		*fctrl;
++	struct xmit_priv		*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++
++	struct rx_pkt_attrib	*rx_pkt_pattrib = &precv_frame->u.hdr.attrib;
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);
++
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++
++	//	unicast probe request frame
++	_rtw_memcpy(pwlanhdr->addr1, rx_pkt_pattrib->src, ETH_ALEN);
++	_rtw_memcpy(pattrib->dst, pwlanhdr->addr1, ETH_ALEN);
++	
++	_rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN);
++	_rtw_memcpy(pattrib->src, pwlanhdr->addr2, ETH_ALEN);
++
++	_rtw_memcpy(pwlanhdr->addr3, rx_pkt_pattrib->bssid, ETH_ALEN);
++	_rtw_memcpy(pattrib->ra, pwlanhdr->addr3, ETH_ALEN);
++	
++	SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq);
++	pmlmeext->mgnt_seq++;
++	SetFrameSubType(pframe, WIFI_ACTION);
++
++	pframe += sizeof (struct rtw_ieee80211_hdr_3addr);
++	pattrib->pktlen = sizeof (struct rtw_ieee80211_hdr_3addr);
++	
++	rtw_build_tdls_dis_rsp_ies(padapter, pmgntframe, pframe, dialog);
++
++	pattrib->nr_frags = 1;
++	pattrib->last_txcmdsz = pattrib->pktlen;
++
++	dump_mgntframe(padapter, pmgntframe);
++
++	return;
++}
++
++void issue_tdls_peer_traffic_indication(_adapter *padapter, struct sta_info *ptdls_sta)
++{
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
++
++	static u8 dialogtoken=0;
++	
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++	
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++
++	pmgntframe->frame_tag = DATA_FRAMETAG;
++	pattrib->ether_type = 0x890d;
++	pattrib->pctrl =0;
++
++	_rtw_memcpy(pattrib->dst, ptdls_sta->hwaddr, ETH_ALEN);
++	_rtw_memcpy(pattrib->src, myid(&(padapter->eeprompriv)), ETH_ALEN);
++
++	_rtw_memcpy(pattrib->ra, get_bssid(pmlmepriv), ETH_ALEN);
++	_rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN);
++
++	//for tdls; pattrib->nr_frags is used to fill dialogtoken
++	ptdls_sta->dialog = dialogtoken;
++	dialogtoken = (dialogtoken+1)%256;
++	//PTI frame's priority should be AC_VO
++	pattrib->priority = 7; 
++
++	update_tdls_attrib(padapter, pattrib);
++	pattrib->qsel=pattrib->priority;
++	if (rtw_xmit_tdls_coalesce(padapter, pmgntframe, TDLS_PEER_TRAFFIC_INDICATION) != _SUCCESS) {
++		rtw_free_xmitbuf(pxmitpriv, pmgntframe->pxmitbuf);
++		rtw_free_xmitframe(pxmitpriv, pmgntframe);
++		goto exit;
++	}
++	rtw_dump_xframe(padapter, pmgntframe);
++	
++exit:
++
++	return;
++}
++
++void issue_tdls_ch_switch_req(_adapter *padapter, u8 *mac_addr)
++{
++	struct xmit_frame	*pmgntframe;
++	struct pkt_attrib	*pattrib;
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	struct xmit_priv	*pxmitpriv = &(padapter->xmitpriv);
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++	
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++
++	pmgntframe->frame_tag = DATA_FRAMETAG;
++	pattrib->ether_type = 0x890d;
++	pattrib->pctrl =0;		
++
++	_rtw_memcpy(pattrib->dst, mac_addr, ETH_ALEN);
++	_rtw_memcpy(pattrib->src, myid(&(padapter->eeprompriv)), ETH_ALEN);
++
++	_rtw_memcpy(pattrib->ra, get_bssid(pmlmepriv), ETH_ALEN);
++	_rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN);
++
++	update_tdls_attrib(padapter, pattrib);
++
++	pattrib->qsel=pattrib->priority;
++	if(rtw_xmit_tdls_coalesce(padapter, pmgntframe, TDLS_CHANNEL_SWITCH_REQUEST) !=_SUCCESS ){
++		rtw_free_xmitbuf(pxmitpriv,pmgntframe->pxmitbuf);
++		rtw_free_xmitframe(pxmitpriv, pmgntframe);
++		goto exit;
++	}
++	rtw_dump_xframe(padapter, pmgntframe);
++
++exit:
++
++	return;
++}
++
++void issue_tdls_ch_switch_rsp(_adapter *padapter, u8 *mac_addr)
++{
++	struct xmit_frame	*pmgntframe;
++	struct pkt_attrib	*pattrib;
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	struct xmit_priv	*pxmitpriv = &(padapter->xmitpriv);
++
++        _irqL irqL;	
++		
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++	
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++
++	pmgntframe->frame_tag = DATA_FRAMETAG;
++	pattrib->ether_type = 0x890d;
++	pattrib->pctrl =0;		
++
++	_rtw_memcpy(pattrib->dst, mac_addr, ETH_ALEN);
++	_rtw_memcpy(pattrib->src, myid(&(padapter->eeprompriv)), ETH_ALEN);
++
++	_rtw_memcpy(pattrib->ra, get_bssid(pmlmepriv), ETH_ALEN);
++	_rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN);
++
++	update_tdls_attrib(padapter, pattrib);
++
++	pattrib->qsel=pattrib->priority;
++/*
++	_enter_critical_bh(&pxmitpriv->lock, &irqL);
++	if(xmitframe_enqueue_for_tdls_sleeping_sta(padapter, pmgntframe)==_TRUE){
++		_exit_critical_bh(&pxmitpriv->lock, &irqL);
++		return _FALSE;
++	}
++*/
++	if(rtw_xmit_tdls_coalesce(padapter, pmgntframe, TDLS_CHANNEL_SWITCH_RESPONSE) !=_SUCCESS ){
++		rtw_free_xmitbuf(pxmitpriv,pmgntframe->pxmitbuf);
++		rtw_free_xmitframe(pxmitpriv, pmgntframe);
++		goto exit;	
++	}
++	rtw_dump_xframe(padapter, pmgntframe);
++
++exit:
++
++	return;
++}
++
++sint On_TDLS_Dis_Rsp(_adapter *adapter, union recv_frame *precv_frame)
++{
++	struct sta_info *ptdls_sta = NULL, *psta = rtw_get_stainfo(&(adapter->stapriv), get_bssid(&(adapter->mlmepriv)));
++	struct recv_priv *precvpriv = &(adapter->recvpriv);
++	u8 *ptr = precv_frame->u.hdr.rx_data, *psa;
++	struct rx_pkt_attrib *pattrib = &(precv_frame->u.hdr.attrib);
++	struct tdls_info *ptdlsinfo = &(adapter->tdlsinfo);
++	u8 empty_addr[ETH_ALEN] = { 0x00 };
++	int UndecoratedSmoothedPWDB;
++	
++
++	//WFDTDLS: for sigma test, not to setup direct link automatically
++	ptdlsinfo->dev_discovered = 1;
++	
++#ifdef CONFIG_TDLS_AUTOSETUP	
++	psa = get_sa(ptr);
++	ptdls_sta = rtw_get_stainfo(&(adapter->stapriv), psa);
++
++	if(ptdls_sta != NULL)
++	{
++		ptdls_sta->tdls_sta_state |= TDLS_ALIVE_STATE;
++
++		//Record the tdls sta with lowest signal strength
++		if( (ptdlsinfo->sta_maximum == _TRUE) && (ptdls_sta->alive_count >= 1) )
++		{
++			if( _rtw_memcmp(ptdlsinfo->ss_record.macaddr, empty_addr, ETH_ALEN) )
++			{
++				_rtw_memcpy(ptdlsinfo->ss_record.macaddr, psa, ETH_ALEN);
++				ptdlsinfo->ss_record.RxPWDBAll = pattrib->RxPWDBAll;
++			}
++			else
++			{
++				if( ptdlsinfo->ss_record.RxPWDBAll < pattrib->RxPWDBAll )
++				{
++					_rtw_memcpy(ptdlsinfo->ss_record.macaddr, psa, ETH_ALEN);
++					ptdlsinfo->ss_record.RxPWDBAll = pattrib->RxPWDBAll;
++				}
++			}
++	}
++
++	}
++	else
++	{
++		if( ptdlsinfo->sta_maximum == _TRUE)
++		{
++			if( _rtw_memcmp( ptdlsinfo->ss_record.macaddr, empty_addr, ETH_ALEN ) )
++			{
++				//All traffics are busy, do not set up another direct link.
++				return _FAIL;
++			}
++			else
++			{
++				if( pattrib->RxPWDBAll > ptdlsinfo->ss_record.RxPWDBAll )
++				{
++					issue_tdls_teardown(adapter, ptdlsinfo->ss_record.macaddr);
++				}
++				else
++				{
++					return _FAIL;
++				}
++			}
++		}
++
++		rtw_hal_get_def_var(adapter, HAL_DEF_UNDERCORATEDSMOOTHEDPWDB, &UndecoratedSmoothedPWDB);
++
++		if( pattrib->RxPWDBAll + TDLS_SIGNAL_THRESH >= UndecoratedSmoothedPWDB);
++		{
++			DBG_871X("pattrib->RxPWDBAll=%d, pdmpriv->UndecoratedSmoothedPWDB=%d\n", pattrib->RxPWDBAll, UndecoratedSmoothedPWDB);
++			issue_tdls_setup_req(adapter, psa);
++		}
++	}
++#endif //CONFIG_TDLS_AUTOSETUP
++
++	return _SUCCESS;
++}
++
++sint On_TDLS_Setup_Req(_adapter *adapter, union recv_frame *precv_frame)
++{
++	struct tdls_info *ptdlsinfo = &adapter->tdlsinfo;
++	u8 *psa, *pmyid;
++	struct sta_info *ptdls_sta= NULL;
++   	struct sta_priv *pstapriv = &adapter->stapriv;
++	u8 *ptr = precv_frame->u.hdr.rx_data;
++	struct mlme_priv *pmlmepriv = &(adapter->mlmepriv);
++	struct security_priv *psecuritypriv = &adapter->securitypriv;
++	_irqL irqL;
++	struct rx_pkt_attrib	*prx_pkt_attrib = &precv_frame->u.hdr.attrib;
++	u8 *prsnie, *ppairwise_cipher;
++	u8 i, k, pairwise_count;
++	u8 ccmp_have=0, rsnie_have=0;
++	u16 j;
++	u8 SNonce[32];
++	u32 *timeout_interval;
++	sint parsing_length;	//frame body length, without icv_len
++	PNDIS_802_11_VARIABLE_IEs	pIE;
++	u8 FIXED_IE = 5;
++	unsigned char		supportRate[16];
++	int				supportRateNum = 0;
++
++	psa = get_sa(ptr);
++	ptdls_sta = rtw_get_stainfo(pstapriv, psa);
++
++	pmyid=myid(&(adapter->eeprompriv));
++	ptr +=prx_pkt_attrib->hdrlen + prx_pkt_attrib->iv_len+LLC_HEADER_SIZE+TYPE_LENGTH_FIELD_SIZE+1;
++	parsing_length= ((union recv_frame *)precv_frame)->u.hdr.len
++			-prx_pkt_attrib->hdrlen
++			-prx_pkt_attrib->iv_len
++			-prx_pkt_attrib->icv_len
++			-LLC_HEADER_SIZE
++			-ETH_TYPE_LEN
++			-PAYLOAD_TYPE_LEN
++			-FIXED_IE;
++
++	if(ptdlsinfo->ap_prohibited == _TRUE)
++	{
++		goto exit;
++	}
++
++	if(ptdls_sta==NULL){
++		ptdls_sta = rtw_alloc_stainfo(pstapriv, psa);
++	}else{
++		if(ptdls_sta->tdls_sta_state & TDLS_LINKED_STATE){
++			//If the direct link is already set up
++			//Process as re-setup after tear down
++			DBG_871X("re-setup a direct link\n");
++		}
++		//already receiving TDLS setup request
++		else if(ptdls_sta->tdls_sta_state & TDLS_INITIATOR_STATE){
++			DBG_871X("receive duplicated TDLS setup request frame in handshaking\n");
++			goto exit;
++		}
++		//When receiving and sending setup_req to the same link at the same time, STA with higher MAC_addr would be initiator
++		//following is to check out MAC_addr
++		else if(ptdls_sta->tdls_sta_state & TDLS_RESPONDER_STATE){
++			DBG_871X("receive setup_req after sending setup_req\n");
++			for (i=0;i<6;i++){
++				if(*(pmyid+i)==*(psa+i)){
++				}
++				else if(*(pmyid+i)>*(psa+i)){
++					goto exit;
++				}else if(*(pmyid+i)<*(psa+i)){
++					ptdls_sta->tdls_sta_state=TDLS_INITIATOR_STATE;
++					break;
++				}
++			}
++		}
++	}
++
++	if(ptdls_sta) 
++	{
++		ptdls_sta->dialog = *(ptr+2);	//copy dialog token
++		ptdls_sta->stat_code = 0;
++
++		//parsing information element
++		for(j=FIXED_IE; j<parsing_length;){
++
++			pIE = (PNDIS_802_11_VARIABLE_IEs)(ptr+ j);
++
++			switch (pIE->ElementID)
++			{
++				case _SUPPORTEDRATES_IE_:
++					_rtw_memcpy(supportRate, pIE->data, pIE->Length);
++					supportRateNum = pIE->Length;
++					break;
++				case _COUNTRY_IE_:
++					break;
++				case _EXT_SUPPORTEDRATES_IE_:
++					if(supportRateNum<=sizeof(supportRate))
++					{
++						_rtw_memcpy(supportRate+supportRateNum, pIE->data, pIE->Length);
++						supportRateNum += pIE->Length;
++					}
++					break;
++				case _SUPPORTED_CH_IE_:
++					break;
++				case _RSN_IE_2_:
++					rsnie_have=1;
++					if(prx_pkt_attrib->encrypt){
++						prsnie=(u8*)pIE;
++						//check whether initiator STA has CCMP pairwise_cipher.
++						ppairwise_cipher=prsnie+10;
++						_rtw_memcpy(&pairwise_count, (u16*)(ppairwise_cipher-2), 1);
++						for(k=0;k<pairwise_count;k++){
++							if(_rtw_memcmp( ppairwise_cipher+4*k, RSN_CIPHER_SUITE_CCMP, 4)==_TRUE)
++								ccmp_have=1;
++						}
++						if(ccmp_have==0){
++							//invalid contents of RSNIE
++							ptdls_sta->stat_code=72;
++						}
++					}
++					break;
++				case _EXT_CAP_IE_:
++					break;
++				case _VENDOR_SPECIFIC_IE_:
++					break;
++				case _FTIE_:
++					if(prx_pkt_attrib->encrypt)
++						_rtw_memcpy(SNonce, (ptr+j+52), 32);
++					break;
++				case _TIMEOUT_ITVL_IE_:
++					if(prx_pkt_attrib->encrypt)
++						timeout_interval = (u32 *)(ptr+j+3);
++					break;
++				case _RIC_Descriptor_IE_:
++					break;
++				case _HT_CAPABILITY_IE_:
++					rtw_tdls_process_ht_cap(adapter, ptdls_sta, pIE->data, pIE->Length);
++					break;
++				case EID_BSSCoexistence:
++					break;
++				case _LINK_ID_IE_:
++					if(_rtw_memcmp(get_bssid(pmlmepriv), pIE->data, 6) == _FALSE)
++					{
++						//not in the same BSS
++						ptdls_sta->stat_code=7;
++					}
++					break;
++				default:
++					break;
++			}
++
++			j += (pIE->Length + 2);
++			
++		}
++
++		//update station supportRate	
++		ptdls_sta->bssratelen = supportRateNum;
++		_rtw_memcpy(ptdls_sta->bssrateset, supportRate, supportRateNum);
++
++		//check status code
++		//if responder STA has/hasn't security on AP, but request hasn't/has RSNIE, it should reject
++		if(ptdls_sta->stat_code == 0 )
++		{
++			if(rsnie_have && (prx_pkt_attrib->encrypt==0)){
++				//security disabled
++				ptdls_sta->stat_code = 5;
++			}else if(rsnie_have==0 && (prx_pkt_attrib->encrypt)){
++				//request haven't RSNIE
++				ptdls_sta->stat_code = 38;
++			}
++
++#ifdef CONFIG_WFD
++			//WFD test plan version 0.18.2 test item 5.1.5
++			//SoUT does not use TDLS if AP uses weak security
++			if ( adapter->wdinfo.wfd_tdls_enable )
++			{
++				if(rsnie_have && (prx_pkt_attrib->encrypt != _AES_))
++				{
++					ptdls_sta->stat_code = 5;
++				}
++			}
++#endif //CONFIG_WFD
++		}
++
++		ptdls_sta->tdls_sta_state|= TDLS_INITIATOR_STATE;
++		if(prx_pkt_attrib->encrypt){
++			_rtw_memcpy(ptdls_sta->SNonce, SNonce, 32);
++			_rtw_memcpy(&(ptdls_sta->TDLS_PeerKey_Lifetime), timeout_interval, 4);
++		}
++		_enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL);		
++		if(!(ptdls_sta->tdls_sta_state & TDLS_LINKED_STATE))
++			ptdlsinfo->sta_cnt++;
++		_exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL);	
++		if( ptdlsinfo->sta_cnt == (NUM_STA - 2) )	// -2: AP + BC/MC sta
++		{
++			ptdlsinfo->sta_maximum = _TRUE;
++		}
++
++#ifdef CONFIG_WFD
++		rtw_tdls_process_wfd_ie(ptdlsinfo, ptr + FIXED_IE, parsing_length - FIXED_IE);
++#endif // CONFIG_WFD
++
++	}
++	else
++	{
++		goto exit;
++	}
++
++ 	issue_tdls_setup_rsp(adapter, precv_frame);
++
++	if(ptdls_sta->stat_code==0)
++	{
++		_set_timer( &ptdls_sta->handshake_timer, TDLS_HANDSHAKE_TIME);
++	}
++	else		//status code!=0 ; setup unsuccess
++	{
++		free_tdls_sta(adapter, ptdls_sta);
++	}
++		
++exit:
++	
++	return _FAIL;
++}
++
++sint On_TDLS_Setup_Rsp(_adapter *adapter, union recv_frame *precv_frame)
++{
++	struct tdls_info *ptdlsinfo = &adapter->tdlsinfo;
++	struct sta_info *ptdls_sta= NULL;
++   	struct sta_priv *pstapriv = &adapter->stapriv;
++	u8 *ptr = precv_frame->u.hdr.rx_data;
++	_irqL irqL;
++	struct rx_pkt_attrib	*prx_pkt_attrib = &precv_frame->u.hdr.attrib;
++	u8 *psa;
++	u16 stat_code;
++	sint parsing_length;	//frame body length, without icv_len
++	PNDIS_802_11_VARIABLE_IEs	pIE;
++	u8 FIXED_IE =7;
++	u8  *pftie, *ptimeout_ie, *plinkid_ie, *prsnie, *pftie_mic, *ppairwise_cipher;
++	u16 pairwise_count, j, k;
++	u8 verify_ccmp=0;
++	unsigned char		supportRate[16];
++	int				supportRateNum = 0;
++
++	psa = get_sa(ptr);
++	ptdls_sta = rtw_get_stainfo(pstapriv, psa);
++
++	if ( NULL == ptdls_sta )
++	{
++		return _FAIL;
++	}
++
++	ptr +=prx_pkt_attrib->hdrlen + prx_pkt_attrib->iv_len+LLC_HEADER_SIZE+TYPE_LENGTH_FIELD_SIZE+1;
++	parsing_length= ((union recv_frame *)precv_frame)->u.hdr.len
++			-prx_pkt_attrib->hdrlen
++			-prx_pkt_attrib->iv_len
++			-prx_pkt_attrib->icv_len
++			-LLC_HEADER_SIZE
++			-TYPE_LENGTH_FIELD_SIZE
++			-1
++			-FIXED_IE;
++
++	_rtw_memcpy(&stat_code, ptr+2, 2);
++	
++	if(stat_code!=0)
++	{
++		DBG_871X( "[%s] status_code = %d, free_tdls_sta\n", __FUNCTION__, stat_code );
++		free_tdls_sta(adapter, ptdls_sta);
++		return _FAIL;
++	}
++
++	stat_code = 0;
++
++	//parsing information element
++	for(j=FIXED_IE; j<parsing_length;)
++	{
++		pIE = (PNDIS_802_11_VARIABLE_IEs)(ptr+ j);
++
++		switch (pIE->ElementID)
++		{
++			case _SUPPORTEDRATES_IE_:
++				_rtw_memcpy(supportRate, pIE->data, pIE->Length);
++				supportRateNum = pIE->Length;
++				break;
++			case _COUNTRY_IE_:
++				break;
++			case _EXT_SUPPORTEDRATES_IE_:
++				if(supportRateNum<=sizeof(supportRate))
++				{
++					_rtw_memcpy(supportRate+supportRateNum, pIE->data, pIE->Length);
++					supportRateNum += pIE->Length;
++				}
++				break;
++			case _SUPPORTED_CH_IE_:
++				break;
++			case _RSN_IE_2_:
++				prsnie=(u8*)pIE;
++				//check whether responder STA has CCMP pairwise_cipher.
++				ppairwise_cipher=prsnie+10;
++				_rtw_memcpy(&pairwise_count, (u16*)(ppairwise_cipher-2), 2);
++				for(k=0;k<pairwise_count;k++){
++					if(_rtw_memcmp( ppairwise_cipher+4*k, RSN_CIPHER_SUITE_CCMP, 4)==_TRUE)
++						verify_ccmp=1;
++				}
++			case _EXT_CAP_IE_:
++				break;
++			case _VENDOR_SPECIFIC_IE_:
++				break;
++			case _FTIE_:
++				pftie=(u8*)pIE;
++				_rtw_memcpy(ptdls_sta->ANonce, (ptr+j+20), 32);
++				break;
++			case _TIMEOUT_ITVL_IE_:
++				ptimeout_ie=(u8*)pIE;
++				break;
++			case _RIC_Descriptor_IE_:
++				break;
++			case _HT_CAPABILITY_IE_:
++				rtw_tdls_process_ht_cap(adapter, ptdls_sta, pIE->data, pIE->Length);
++				break;
++			case EID_BSSCoexistence:
++				break;
++			case _LINK_ID_IE_:
++				plinkid_ie=(u8*)pIE;
++				break;
++			default:
++				break;
++		}
++
++		j += (pIE->Length + 2);
++		
++	}
++
++	//update station supportRate	
++	ptdls_sta->bssratelen = supportRateNum;
++	_rtw_memcpy(ptdls_sta->bssrateset, supportRate, supportRateNum);
++
++#ifdef CONFIG_WFD
++	rtw_tdls_process_wfd_ie(ptdlsinfo, ptr + FIXED_IE, parsing_length - FIXED_IE);
++#endif // CONFIG_WFD
++
++	if(stat_code != 0)
++	{
++		ptdls_sta->stat_code = stat_code;
++	}
++	else
++	{
++		if(prx_pkt_attrib->encrypt)
++		{
++			if(verify_ccmp==1)
++			{
++				wpa_tdls_generate_tpk(adapter, ptdls_sta);
++				ptdls_sta->stat_code=0;
++				if(tdls_verify_mic(ptdls_sta->tpk.kck, 2, plinkid_ie, prsnie, ptimeout_ie, pftie)==0)	//0: Invalid, 1: valid
++				{
++					free_tdls_sta(adapter, ptdls_sta);
++					return _FAIL;
++				}
++			}
++			else
++			{
++				ptdls_sta->stat_code=72;	//invalide contents of RSNIE
++			}
++
++		}else{
++			ptdls_sta->stat_code=0;
++		}
++	}
++
++	DBG_871X("issue_tdls_setup_cfm\n");
++	issue_tdls_setup_cfm(adapter, precv_frame);
++
++	if(ptdls_sta->stat_code==0)
++	{
++		ptdlsinfo->setup_state = TDLS_LINKED_STATE;
++
++		if( ptdls_sta->tdls_sta_state & TDLS_RESPONDER_STATE )
++		{
++			ptdls_sta->tdls_sta_state |= TDLS_LINKED_STATE;
++			_cancel_timer_ex( &ptdls_sta->handshake_timer);
++#ifdef CONFIG_TDLS_AUTOCHECKALIVE
++			_set_timer( &ptdls_sta->alive_timer1, TDLS_ALIVE_TIMER_PH1);
++#endif //CONFIG_TDLS_AUTOSETUP
++		}
++
++		rtw_tdls_set_mac_id(ptdlsinfo, ptdls_sta);
++		rtw_tdls_set_key(adapter, prx_pkt_attrib, ptdls_sta);
++
++		rtw_tdls_cmd(adapter, ptdls_sta->hwaddr, TDLS_WRCR);
++
++	}
++	else //status code!=0 ; setup unsuccessful
++	{
++		free_tdls_sta(adapter, ptdls_sta);
++	}
++
++	return _FAIL;
++
++}
++
++sint On_TDLS_Setup_Cfm(_adapter *adapter, union recv_frame *precv_frame)
++{
++	struct tdls_info *ptdlsinfo = &adapter->tdlsinfo;
++	struct sta_info *ptdls_sta= NULL;
++   	struct sta_priv *pstapriv = &adapter->stapriv;
++	u8 *ptr = precv_frame->u.hdr.rx_data;
++	_irqL irqL;
++	struct rx_pkt_attrib	*prx_pkt_attrib = &precv_frame->u.hdr.attrib;
++	u8 *psa; 
++	u16 stat_code;
++	sint parsing_length;
++	PNDIS_802_11_VARIABLE_IEs	pIE;
++	u8 FIXED_IE =5;
++	u8  *pftie, *ptimeout_ie, *plinkid_ie, *prsnie, *pftie_mic, *ppairwise_cipher;
++	u16 j, pairwise_count;
++
++	psa = get_sa(ptr);
++	ptdls_sta = rtw_get_stainfo(pstapriv, psa);
++
++	ptr +=prx_pkt_attrib->hdrlen + prx_pkt_attrib->iv_len+LLC_HEADER_SIZE+TYPE_LENGTH_FIELD_SIZE+1;
++	parsing_length= ((union recv_frame *)precv_frame)->u.hdr.len
++			-prx_pkt_attrib->hdrlen
++			-prx_pkt_attrib->iv_len
++			-prx_pkt_attrib->icv_len
++			-LLC_HEADER_SIZE
++			-ETH_TYPE_LEN
++			-PAYLOAD_TYPE_LEN
++			-FIXED_IE;
++	_rtw_memcpy(&stat_code, ptr+2, 2);
++
++	if(stat_code!=0){
++		DBG_871X( "[%s] stat_code = %d\n, free_tdls_sta", __FUNCTION__, stat_code );
++		free_tdls_sta(adapter, ptdls_sta);
++		return _FAIL;
++	}
++
++	if(prx_pkt_attrib->encrypt){
++		//parsing information element
++		for(j=FIXED_IE; j<parsing_length;){
++
++			pIE = (PNDIS_802_11_VARIABLE_IEs)(ptr+ j);
++
++			switch (pIE->ElementID)
++			{
++				case _RSN_IE_2_:
++					prsnie=(u8*)pIE;
++					break;
++				case _VENDOR_SPECIFIC_IE_:
++					break;
++	 			case _FTIE_:
++					pftie=(u8*)pIE;
++					break;
++				case _TIMEOUT_ITVL_IE_:
++					ptimeout_ie=(u8*)pIE;
++					break;
++				case _HT_EXTRA_INFO_IE_:
++					break;
++	 			case _LINK_ID_IE_:
++					plinkid_ie=(u8*)pIE;
++					break;
++				default:
++					break;
++			}
++
++			j += (pIE->Length + 2);
++			
++		}
++
++		//verify mic in FTIE MIC field
++		if(tdls_verify_mic(ptdls_sta->tpk.kck, 3, plinkid_ie, prsnie, ptimeout_ie, pftie)==0){	//0: Invalid, 1: Valid
++			free_tdls_sta(adapter, ptdls_sta);
++			return _FAIL;
++		}
++
++	}
++
++	ptdlsinfo->setup_state = TDLS_LINKED_STATE;
++	if( ptdls_sta->tdls_sta_state & TDLS_INITIATOR_STATE )
++	{
++		ptdls_sta->tdls_sta_state|=TDLS_LINKED_STATE;
++		_cancel_timer_ex( &ptdls_sta->handshake_timer);
++#ifdef CONFIG_TDLS_AUTOCHECKALIVE
++		_set_timer( &ptdls_sta->alive_timer1, TDLS_ALIVE_TIMER_PH1);
++#endif //CONFIG_TDLS_AUTOCHECKALIVE
++	}
++
++	rtw_tdls_set_mac_id(ptdlsinfo, ptdls_sta);
++	rtw_tdls_set_key(adapter, prx_pkt_attrib, ptdls_sta);
++
++	rtw_tdls_cmd(adapter, ptdls_sta->hwaddr, TDLS_WRCR);
++	
++	return _FAIL;
++
++}
++
++sint On_TDLS_Dis_Req(_adapter *adapter, union recv_frame *precv_frame)
++{
++	struct rx_pkt_attrib	*prx_pkt_attrib = &precv_frame->u.hdr.attrib;
++	struct sta_priv *pstapriv = &adapter->stapriv;
++	struct sta_info *psta_ap;
++	u8 *ptr = precv_frame->u.hdr.rx_data;
++	sint parsing_length;	//frame body length, without icv_len
++	PNDIS_802_11_VARIABLE_IEs	pIE;
++	u8 FIXED_IE = 3, *dst, *pdialog = NULL;
++	u16 j;
++
++	ptr +=prx_pkt_attrib->hdrlen + prx_pkt_attrib->iv_len + LLC_HEADER_SIZE+TYPE_LENGTH_FIELD_SIZE + 1;
++	pdialog=ptr+2;
++
++	parsing_length= ((union recv_frame *)precv_frame)->u.hdr.len
++			-prx_pkt_attrib->hdrlen
++			-prx_pkt_attrib->iv_len
++			-prx_pkt_attrib->icv_len
++			-LLC_HEADER_SIZE
++			-TYPE_LENGTH_FIELD_SIZE
++			-1
++			-FIXED_IE;
++
++	//parsing information element
++	for(j=FIXED_IE; j<parsing_length;){
++
++		pIE = (PNDIS_802_11_VARIABLE_IEs)(ptr+ j);
++
++		switch (pIE->ElementID)
++		{
++			case _LINK_ID_IE_:
++				psta_ap = rtw_get_stainfo(pstapriv, pIE->data);
++				if(psta_ap == NULL)
++				{
++					goto exit;
++				}
++				dst = pIE->data + 12;
++				if( (MacAddr_isBcst(dst) == _FALSE) && (_rtw_memcmp(myid(&(adapter->eeprompriv)), dst, 6) == _FALSE) )
++				{
++					goto exit;
++				}
++				break;
++			default:
++				break;
++		}
++
++		j += (pIE->Length + 2);
++		
++	}
++
++	//check frame contents
++
++	issue_tdls_dis_rsp(adapter, precv_frame, *(pdialog) );
++
++exit:
++
++	return _FAIL;
++	
++}
++
++sint On_TDLS_Teardown(_adapter *adapter, union recv_frame *precv_frame)
++{
++	u8 *psa;
++	u8 *ptr = precv_frame->u.hdr.rx_data;
++	struct rx_pkt_attrib	*prx_pkt_attrib = &precv_frame->u.hdr.attrib;
++	struct mlme_ext_priv	*pmlmeext = &(adapter->mlmeextpriv);	
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct sta_priv 	*pstapriv = &adapter->stapriv;
++	struct sta_info *ptdls_sta= NULL;
++	_irqL irqL;
++
++	psa = get_sa(ptr);
++
++	ptdls_sta = rtw_get_stainfo(pstapriv, psa);
++	if(ptdls_sta!=NULL){
++		if(ptdls_sta->tdls_sta_state & TDLS_CH_SWITCH_ON_STATE){
++			rtw_tdls_cmd(adapter, ptdls_sta->hwaddr, TDLS_CS_OFF);
++		}
++		free_tdls_sta(adapter, ptdls_sta);
++	}
++		
++	return _FAIL;
++	
++}
++
++u8 TDLS_check_ch_state(uint state){
++	if(	(state & TDLS_CH_SWITCH_ON_STATE) &&
++		(state & TDLS_AT_OFF_CH_STATE) &&
++		(state & TDLS_PEER_AT_OFF_STATE) ){
++
++		if(state & TDLS_PEER_SLEEP_STATE)
++			return 2;	//U-APSD + ch. switch
++		else
++			return 1;	//ch. switch
++	}else
++		return 0;
++}
++
++//we process buffered data for 1. U-APSD, 2. ch. switch, 3. U-APSD + ch. switch here
++sint On_TDLS_Peer_Traffic_Rsp(_adapter *adapter, union recv_frame *precv_frame)
++{
++	struct tdls_info *ptdlsinfo = &adapter->tdlsinfo;
++	struct mlme_ext_priv *pmlmeext = &adapter->mlmeextpriv;
++	struct rx_pkt_attrib	*pattrib = & precv_frame->u.hdr.attrib;
++	struct sta_priv *pstapriv = &adapter->stapriv;
++	//get peer sta infomation
++	struct sta_info *ptdls_sta = rtw_get_stainfo(pstapriv, pattrib->src);
++	u8 wmmps_ac=0, state=TDLS_check_ch_state(ptdls_sta->tdls_sta_state);
++	int i;
++	
++	ptdls_sta->sta_stats.rx_data_pkts++;
++
++	//receive peer traffic response frame, sleeping STA wakes up
++	//ptdls_sta->tdls_sta_state &= ~(TDLS_PEER_SLEEP_STATE);
++	process_wmmps_data( adapter, precv_frame);
++
++	// if noticed peer STA wakes up by receiving peer traffic response
++	// and we want to do channel swtiching, then we will transmit channel switch request first
++	if(ptdls_sta->tdls_sta_state & TDLS_APSD_CHSW_STATE){
++		issue_tdls_ch_switch_req(adapter, pattrib->src);
++		ptdls_sta->tdls_sta_state &= ~(TDLS_APSD_CHSW_STATE);
++		return  _FAIL;
++	}
++
++	//check 4-AC queue bit
++	if(ptdls_sta->uapsd_vo || ptdls_sta->uapsd_vi || ptdls_sta->uapsd_be || ptdls_sta->uapsd_bk)
++		wmmps_ac=1;
++
++	//if it's a direct link and have buffered frame
++	if(ptdls_sta->tdls_sta_state & TDLS_LINKED_STATE){
++		if(wmmps_ac && state)
++		{
++			_irqL irqL;	 
++			_list	*xmitframe_plist, *xmitframe_phead;
++			struct xmit_frame *pxmitframe=NULL;
++		
++			_enter_critical_bh(&ptdls_sta->sleep_q.lock, &irqL);	
++
++			xmitframe_phead = get_list_head(&ptdls_sta->sleep_q);
++			xmitframe_plist = get_next(xmitframe_phead);
++
++			//transmit buffered frames
++			while ((rtw_end_of_queue_search(xmitframe_phead, xmitframe_plist)) == _FALSE)
++			{			
++				pxmitframe = LIST_CONTAINOR(xmitframe_plist, struct xmit_frame, list);
++				xmitframe_plist = get_next(xmitframe_plist);
++				rtw_list_delete(&pxmitframe->list);
++
++				ptdls_sta->sleepq_len--;
++				if(ptdls_sta->sleepq_len>0){
++					pxmitframe->attrib.mdata = 1;
++					pxmitframe->attrib.eosp = 0;
++				}else{
++					pxmitframe->attrib.mdata = 0;
++					pxmitframe->attrib.eosp = 1;
++				}
++				//pxmitframe->attrib.triggered = 1;	//maybe doesn't need in TDLS
++				if(rtw_hal_xmit(adapter, pxmitframe) == _TRUE)
++				{		
++					rtw_os_xmit_complete(adapter, pxmitframe);
++				}
++
++			}
++
++			if(ptdls_sta->sleepq_len==0)
++			{
++				DBG_871X("no buffered packets for tdls to xmit\n");
++				//on U-APSD + CH. switch state, when there is no buffered date to xmit,
++				// we should go back to base channel
++				if(state==2){
++					rtw_tdls_cmd(adapter, ptdls_sta->hwaddr, TDLS_CS_OFF);
++				}else if(ptdls_sta->tdls_sta_state&TDLS_SW_OFF_STATE){
++						ptdls_sta->tdls_sta_state &= ~(TDLS_SW_OFF_STATE);
++						ptdlsinfo->candidate_ch= pmlmeext->cur_channel;
++						issue_tdls_ch_switch_req(adapter, pattrib->src);
++						DBG_871X("issue tdls ch switch req back to base channel\n");
++				}
++				
++			}
++			else
++			{
++				DBG_871X("error!psta->sleepq_len=%d\n", ptdls_sta->sleepq_len);
++				ptdls_sta->sleepq_len=0;						
++			}
++
++			_exit_critical_bh(&ptdls_sta->sleep_q.lock, &irqL);			
++		
++		}
++
++	}
++
++	return _FAIL;
++}
++
++sint On_TDLS_Ch_Switch_Req(_adapter *adapter, union recv_frame *precv_frame)
++{
++	struct sta_info *ptdls_sta= NULL;
++   	struct sta_priv *pstapriv = &adapter->stapriv;
++	u8 *ptr = precv_frame->u.hdr.rx_data;
++	struct rx_pkt_attrib	*prx_pkt_attrib = &precv_frame->u.hdr.attrib;
++	u8 *psa; 
++	sint parsing_length;
++	PNDIS_802_11_VARIABLE_IEs	pIE;
++	u8 FIXED_IE =3;
++	u16 j;
++	struct mlme_ext_priv *pmlmeext = &adapter->mlmeextpriv;
++
++	psa = get_sa(ptr);
++	ptdls_sta = rtw_get_stainfo(pstapriv, psa);
++	
++	ptr +=prx_pkt_attrib->hdrlen + prx_pkt_attrib->iv_len+LLC_HEADER_SIZE+TYPE_LENGTH_FIELD_SIZE+1;
++	parsing_length= ((union recv_frame *)precv_frame)->u.hdr.len
++			-prx_pkt_attrib->hdrlen
++			-prx_pkt_attrib->iv_len
++			-prx_pkt_attrib->icv_len
++			-LLC_HEADER_SIZE
++			-ETH_TYPE_LEN
++			-PAYLOAD_TYPE_LEN
++			-FIXED_IE;
++
++	ptdls_sta->off_ch = *(ptr+2);
++	
++	//parsing information element
++	for(j=FIXED_IE; j<parsing_length;){
++
++		pIE = (PNDIS_802_11_VARIABLE_IEs)(ptr+ j);
++
++		switch (pIE->ElementID)
++		{
++			case _COUNTRY_IE_:
++				break;
++			case _CH_SWTICH_ANNOUNCE_:
++				break;
++ 			case _LINK_ID_IE_:
++				break;
++			case _CH_SWITCH_TIMING_:
++				_rtw_memcpy(&ptdls_sta->ch_switch_time, pIE->data, 2);
++				_rtw_memcpy(&ptdls_sta->ch_switch_timeout, pIE->data+2, 2);
++			default:
++				break;
++		}
++
++		j += (pIE->Length + 2);
++		
++	}
++
++	//todo: check status
++	ptdls_sta->stat_code=0;
++	ptdls_sta->tdls_sta_state |= TDLS_CH_SWITCH_ON_STATE;
++
++	issue_nulldata(adapter, NULL, 1, 0, 0);
++
++	issue_tdls_ch_switch_rsp(adapter, psa);
++
++	DBG_871X("issue tdls channel switch response\n");
++
++	if((ptdls_sta->tdls_sta_state & TDLS_CH_SWITCH_ON_STATE) && ptdls_sta->off_ch==pmlmeext->cur_channel){
++		DBG_871X("back to base channel %x\n", pmlmeext->cur_channel);
++		ptdls_sta->option=7;
++		rtw_tdls_cmd(adapter, ptdls_sta->hwaddr, TDLS_BASE_CH);
++	}else{		
++		ptdls_sta->option=6;
++		rtw_tdls_cmd(adapter, ptdls_sta->hwaddr, TDLS_OFF_CH);
++	}
++	return _FAIL;
++}
++
++sint On_TDLS_Ch_Switch_Rsp(_adapter *adapter, union recv_frame *precv_frame)
++{
++	struct sta_info *ptdls_sta= NULL;
++   	struct sta_priv *pstapriv = &adapter->stapriv;
++	u8 *ptr = precv_frame->u.hdr.rx_data;
++	struct rx_pkt_attrib	*prx_pkt_attrib = &precv_frame->u.hdr.attrib;
++	u8 *psa; 
++	sint parsing_length;
++	PNDIS_802_11_VARIABLE_IEs	pIE;
++	u8 FIXED_IE =4;
++	u16 stat_code, j, switch_time, switch_timeout;
++	struct mlme_ext_priv *pmlmeext = &adapter->mlmeextpriv;
++
++	psa = get_sa(ptr);
++	ptdls_sta = rtw_get_stainfo(pstapriv, psa);
++
++	//if channel switch is running and receiving Unsolicited TDLS Channel Switch Response,
++	//it will go back to base channel and terminate this channel switch procedure
++	if(ptdls_sta->tdls_sta_state & TDLS_CH_SWITCH_ON_STATE ){
++		if(pmlmeext->cur_channel==ptdls_sta->off_ch){
++			DBG_871X("back to base channel %x\n", pmlmeext->cur_channel);
++			ptdls_sta->option=7;
++			rtw_tdls_cmd(adapter, ptdls_sta->hwaddr, TDLS_OFF_CH);
++		}else{
++			DBG_871X("receive unsolicited channel switch response \n");
++			rtw_tdls_cmd(adapter, ptdls_sta->hwaddr, TDLS_CS_OFF);
++		}
++		return _FAIL;
++	}
++
++	//avoiding duplicated or unconditional ch. switch. rsp
++	if((ptdls_sta->tdls_sta_state & TDLS_CH_SW_INITIATOR_STATE) != TDLS_CH_SW_INITIATOR_STATE)
++		return _FAIL;
++	
++	ptr +=prx_pkt_attrib->hdrlen + prx_pkt_attrib->iv_len+LLC_HEADER_SIZE+TYPE_LENGTH_FIELD_SIZE+1;
++	parsing_length= ((union recv_frame *)precv_frame)->u.hdr.len
++			-prx_pkt_attrib->hdrlen
++			-prx_pkt_attrib->iv_len
++			-prx_pkt_attrib->icv_len
++			-LLC_HEADER_SIZE
++			-ETH_TYPE_LEN
++			-PAYLOAD_TYPE_LEN
++			-FIXED_IE;
++
++	_rtw_memcpy(&stat_code, ptr+2, 2);
++
++	if(stat_code!=0){
++		return _FAIL;
++	}
++	
++	//parsing information element
++	for(j=FIXED_IE; j<parsing_length;){
++
++		pIE = (PNDIS_802_11_VARIABLE_IEs)(ptr+ j);
++
++		switch (pIE->ElementID)
++		{
++ 			case _LINK_ID_IE_:
++				break;
++			case _CH_SWITCH_TIMING_:
++				_rtw_memcpy(&switch_time, pIE->data, 2);
++				if(switch_time > ptdls_sta->ch_switch_time)
++					_rtw_memcpy(&ptdls_sta->ch_switch_time, &switch_time, 2);
++
++				_rtw_memcpy(&switch_timeout, pIE->data+2, 2);
++				if(switch_timeout > ptdls_sta->ch_switch_timeout)
++					_rtw_memcpy(&ptdls_sta->ch_switch_timeout, &switch_timeout, 2);
++
++			default:
++				break;
++		}
++
++		j += (pIE->Length + 2);
++		
++	}
++
++	ptdls_sta->tdls_sta_state &= ~(TDLS_CH_SW_INITIATOR_STATE);
++	ptdls_sta->tdls_sta_state |=TDLS_CH_SWITCH_ON_STATE;
++
++	//goto set_channel_workitem_callback()
++	ptdls_sta->option=6;
++	rtw_tdls_cmd(adapter, ptdls_sta->hwaddr, TDLS_OFF_CH);
++
++	return _FAIL;	
++}
++
++#ifdef CONFIG_WFD
++void wfd_ie_tdls(_adapter * padapter, u8 *pframe, u32 *pktlen )
++{
++	struct mlme_priv		*pmlmepriv = &padapter->mlmepriv;
++	struct wifi_display_info	*pwfd_info = padapter->tdlsinfo.wfd_info;
++	u8 wfdie[ MAX_WFD_IE_LEN] = { 0x00 };
++	u32 wfdielen = 0;
++
++	//	WFD OUI
++	wfdielen = 0;
++	wfdie[ wfdielen++ ] = 0x50;
++	wfdie[ wfdielen++ ] = 0x6F;
++	wfdie[ wfdielen++ ] = 0x9A;
++	wfdie[ wfdielen++ ] = 0x0A;	//	WFA WFD v1.0
++
++	//	Commented by Albert 20110825
++	//	According to the WFD Specification, the negotiation request frame should contain 3 WFD attributes
++	//	1. WFD Device Information
++	//	2. Associated BSSID ( Optional )
++	//	3. Local IP Adress ( Optional )
++
++	//	WFD Device Information ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_DEVICE_INFO;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0006);
++	wfdielen += 2;
++
++	//	Value1:
++	//	WFD device information
++	//	available for WFD session + Preferred TDLS + WSD ( WFD Service Discovery )
++	RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->wfd_device_type | WFD_DEVINFO_SESSION_AVAIL 
++								| WFD_DEVINFO_PC_TDLS | WFD_DEVINFO_WSD);
++	wfdielen += 2;
++
++	//	Value2:
++	//	Session Management Control Port
++	//	Default TCP port for RTSP messages is 554
++	RTW_PUT_BE16(wfdie + wfdielen, pwfd_info->rtsp_ctrlport );
++	wfdielen += 2;
++
++	//	Value3:
++	//	WFD Device Maximum Throughput
++	//	300Mbps is the maximum throughput
++	RTW_PUT_BE16(wfdie + wfdielen, 300);
++	wfdielen += 2;
++
++	//	Associated BSSID ATTR
++	//	Type:
++	wfdie[ wfdielen++ ] = WFD_ATTR_ASSOC_BSSID;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0006);
++	wfdielen += 2;
++
++	//	Value:
++	//	Associated BSSID
++	if ( check_fwstate( pmlmepriv, _FW_LINKED) == _TRUE )
++	{
++		_rtw_memcpy( wfdie + wfdielen, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN );
++	}
++	else
++	{
++		_rtw_memset( wfdie + wfdielen, 0x00, ETH_ALEN );
++	}
++
++	//	Local IP Address ATTR
++	wfdie[ wfdielen++ ] = WFD_ATTR_LOCAL_IP_ADDR;
++
++	//	Length:
++	//	Note: In the WFD specification, the size of length field is 2.
++	RTW_PUT_BE16(wfdie + wfdielen, 0x0005);
++	wfdielen += 2;
++
++	//	Version:
++	//	0x01: Version1;IPv4
++	wfdie[ wfdielen++ ] = 0x01;	
++
++	//	IPv4 Address
++	_rtw_memcpy( wfdie + wfdielen, pwfd_info->ip_address, 4 );
++	wfdielen += 4;
++	
++	pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, wfdielen, (unsigned char *) wfdie, pktlen);
++	
++}
++#endif //CONFIG_WFD
++
++void rtw_build_tdls_setup_req_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe)
++{
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &pmlmeext->mlmext_info;
++	struct pkt_attrib	*pattrib = &pxmitframe->attrib;
++	struct registry_priv	*pregistrypriv = &padapter->registrypriv;
++	struct sta_info *ptdls_sta=rtw_get_stainfo( (&padapter->stapriv) , pattrib->dst);
++
++	u8 payload_type = 0x02;
++	u8 category = RTW_WLAN_CATEGORY_TDLS;
++	u8 action = TDLS_SETUP_REQUEST;
++	u8 bssrate[NDIS_802_11_LENGTH_RATES_EX]; //Use NDIS_802_11_LENGTH_RATES_EX in order to call func.rtw_set_supported_rate
++ 	int	bssrate_len = 0, i = 0 ;
++	u8 more_supportedrates = 0;
++	unsigned int ie_len;
++	u8 *p;
++	struct mlme_priv 		*pmlmepriv = &padapter->mlmepriv;
++	u8 link_id_addr[18] = {0};
++	u8 iedata=0;
++	u8 sup_ch[ 30 * 2 ] = {0x00 }, sup_ch_idx = 0, idx_5g = 2;	//For supported channel
++	u8 timeout_itvl[5];	//set timeout interval to maximum value
++	u32 time;
++
++	//SNonce	
++	if(pattrib->encrypt){
++		for(i=0;i<8;i++){
++			time=rtw_get_current_time();
++			_rtw_memcpy(&ptdls_sta->SNonce[4*i], (u8 *)&time, 4);
++		}
++	}
++
++	//payload type
++	pframe = rtw_set_fixed_ie(pframe, 1, &(payload_type), &(pattrib->pktlen));
++	//category, action, dialog token
++	pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(ptdls_sta->dialog), &(pattrib->pktlen));
++
++	//capability
++	_rtw_memcpy(pframe, rtw_get_capability_from_ie(pmlmeinfo->network.IEs), 2);
++
++	if(pattrib->encrypt)
++		*pframe =*pframe | BIT(4);
++	pframe += 2;
++	pattrib->pktlen += 2;
++
++	//supported rates
++	rtw_set_supported_rate(bssrate, WIRELESS_11BG_24N);
++	bssrate_len = IEEE80211_CCK_RATE_LEN + IEEE80211_NUM_OFDM_RATESLEN;
++
++	if (bssrate_len > 8)
++	{
++		pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_ , 8, bssrate, &(pattrib->pktlen));
++		more_supportedrates = 1;
++	}
++	else
++	{
++		pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_ , bssrate_len , bssrate, &(pattrib->pktlen));
++	}
++
++	//country(optional)
++	//extended supported rates
++	if(more_supportedrates==1){
++		pframe = rtw_set_ie(pframe, _EXT_SUPPORTEDRATES_IE_ , (bssrate_len - 8), (bssrate + 8), &(pattrib->pktlen));
++	}
++
++	//supported channels
++	pframe = rtw_tdls_set_sup_ch(pmlmeext, pframe, pattrib);
++	
++	//	SRC IE
++	pframe = rtw_set_ie( pframe, _SRC_IE_, 16, TDLS_SRC, &(pattrib->pktlen));
++	
++	//RSNIE
++	if(pattrib->encrypt)
++		pframe = rtw_set_ie(pframe, _RSN_IE_2_, 20, TDLS_RSNIE, &(pattrib->pktlen));
++	
++	//extended capabilities
++	pframe = rtw_set_ie(pframe, _EXT_CAP_IE_ , 5, TDLS_EXT_CAPIE, &(pattrib->pktlen));
++
++	//QoS capability(WMM_IE)
++	pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, 7, TDLS_WMMIE,  &(pattrib->pktlen));
++
++
++	if(pattrib->encrypt){
++		//FTIE
++		_rtw_memset(pframe, 0, 84);	//All fields except SNonce shall be set to 0
++		_rtw_memset(pframe, _FTIE_, 1);	//version
++		_rtw_memset((pframe+1), 82, 1);	//length
++		_rtw_memcpy((pframe+52), ptdls_sta->SNonce, 32);
++		pframe += 84;
++		pattrib->pktlen += 84;
++
++		//Timeout interval
++		timeout_itvl[0]=0x02;
++		_rtw_memcpy(timeout_itvl+1, (u8 *)(&ptdls_sta->TDLS_PeerKey_Lifetime), 4);
++		pframe = rtw_set_ie(pframe, _TIMEOUT_ITVL_IE_, 5, timeout_itvl,  &(pattrib->pktlen));
++	}
++
++	//Sup_reg_classes(optional)
++	//HT capabilities
++	pframe = rtw_tdls_set_ht_cap(padapter, pframe, pattrib);
++
++	//20/40 BSS coexistence
++	if(pmlmepriv->num_FortyMHzIntolerant>0)
++		iedata |= BIT(2);//20 MHz BSS Width Request
++	pframe = rtw_set_ie(pframe, EID_BSSCoexistence,  1, &iedata, &(pattrib->pktlen));
++	
++	//Link identifier
++	_rtw_memcpy(link_id_addr, pattrib->ra, 6);
++	_rtw_memcpy((link_id_addr+6), pattrib->src, 6);
++	_rtw_memcpy((link_id_addr+12), pattrib->dst, 6);
++	pframe = rtw_set_ie(pframe, _LINK_ID_IE_,  18, link_id_addr, &(pattrib->pktlen));
++
++#ifdef CONFIG_WFD
++	wfd_ie_tdls( padapter, pframe, &(pattrib->pktlen) );
++#endif //CONFIG_WFD
++
++}
++
++void rtw_build_tdls_setup_rsp_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe)
++{
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct pkt_attrib	*pattrib = &pxmitframe->attrib;
++	struct sta_info *ptdls_sta;
++	struct registry_priv	*pregistrypriv = &padapter->registrypriv;
++
++	u8 payload_type = 0x02;	
++	unsigned char category = RTW_WLAN_CATEGORY_TDLS;
++	unsigned char action = TDLS_SETUP_RESPONSE;
++	unsigned char	bssrate[NDIS_802_11_LENGTH_RATES_EX];	
++	int	bssrate_len = 0;
++	u8 more_supportedrates = 0;
++	unsigned int ie_len;
++	unsigned char *p;
++	struct mlme_priv 		*pmlmepriv = &padapter->mlmepriv;
++	u8 link_id_addr[18] = {0};
++	u8 iedata=0;
++	u8 timeout_itvl[5];	//setup response timeout interval will copy from request
++	u8 ANonce[32];	//maybe it can put in ontdls_req
++	u8 k;		//for random ANonce
++	u8  *pftie, *ptimeout_ie, *plinkid_ie, *prsnie, *pftie_mic;
++	u32 time;
++
++	ptdls_sta = rtw_get_stainfo( &(padapter->stapriv) , pattrib->dst);
++
++	if(ptdls_sta == NULL )
++	{
++		DBG_871X("[%s] %d\n", __FUNCTION__, __LINE__);
++		return;
++	}
++
++	if(pattrib->encrypt){
++		for(k=0;k<8;k++){
++			time=rtw_get_current_time();
++			_rtw_memcpy(&ptdls_sta->ANonce[4*k], (u8*)&time, 4);
++		}
++	}
++
++	//payload type
++	pframe = rtw_set_fixed_ie(pframe, 1, &(payload_type), &(pattrib->pktlen));	
++	//category, action, status code
++	pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 2, (u8 *)&ptdls_sta->stat_code, &(pattrib->pktlen));
++
++	if(ptdls_sta->stat_code!=0)	//invalid setup request
++	{
++		DBG_871X("ptdls_sta->stat_code:%04x \n", ptdls_sta->stat_code);		
++		return;
++	}
++	
++	//dialog token
++	pframe = rtw_set_fixed_ie(pframe, 1, &(ptdls_sta->dialog), &(pattrib->pktlen));
++
++	//capability
++	_rtw_memcpy(pframe, rtw_get_capability_from_ie(pmlmeinfo->network.IEs), 2);
++
++	if(pattrib->encrypt )
++		*pframe =*pframe | BIT(4);
++	pframe += 2;
++	pattrib->pktlen += 2;
++
++	//supported rates
++	rtw_set_supported_rate(bssrate, WIRELESS_11BG_24N);
++	bssrate_len = IEEE80211_CCK_RATE_LEN + IEEE80211_NUM_OFDM_RATESLEN;
++
++	if (bssrate_len > 8)
++	{
++		pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_ , 8, bssrate, &(pattrib->pktlen));
++		more_supportedrates = 1;
++	}
++	else
++	{
++		pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_ , bssrate_len , bssrate, &(pattrib->pktlen));
++	}
++
++	//country(optional)
++	//extended supported rates
++	if(more_supportedrates==1){
++		pframe = rtw_set_ie(pframe, _EXT_SUPPORTEDRATES_IE_ , (bssrate_len - 8), (bssrate + 8), &(pattrib->pktlen));
++	}
++
++	//supported channels
++	pframe = rtw_tdls_set_sup_ch(pmlmeext, pframe, pattrib);
++	
++	// SRC IE
++	pframe = rtw_set_ie(pframe, _SRC_IE_ , 16, TDLS_SRC, &(pattrib->pktlen));
++
++	//RSNIE
++	if(pattrib->encrypt){
++		prsnie = pframe;
++		pframe = rtw_set_ie(pframe, _RSN_IE_2_, 20, TDLS_RSNIE, &(pattrib->pktlen));
++	}
++
++	//extended capabilities
++	pframe = rtw_set_ie(pframe, _EXT_CAP_IE_ , 5, TDLS_EXT_CAPIE, &(pattrib->pktlen));
++
++	//QoS capability(WMM_IE)
++	pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, 7, TDLS_WMMIE,  &(pattrib->pktlen));
++
++	if(pattrib->encrypt){
++		wpa_tdls_generate_tpk(padapter, ptdls_sta);
++
++		//FTIE
++		pftie = pframe;
++		pftie_mic = pframe+4;
++		_rtw_memset(pframe, 0, 84);	//All fields except SNonce shall be set to 0
++		_rtw_memset(pframe, _FTIE_, 1);	//version
++		_rtw_memset((pframe+1), 82, 1);	//length
++		_rtw_memcpy((pframe+20), ptdls_sta->ANonce, 32);
++		_rtw_memcpy((pframe+52), ptdls_sta->SNonce, 32);
++		pframe += 84;
++		pattrib->pktlen += 84;
++
++		//Timeout interval
++		ptimeout_ie = pframe;
++		timeout_itvl[0]=0x02;
++		_rtw_memcpy(timeout_itvl+1, (u8 *)(&ptdls_sta->TDLS_PeerKey_Lifetime), 4);
++		pframe = rtw_set_ie(pframe, _TIMEOUT_ITVL_IE_, 5, timeout_itvl,  &(pattrib->pktlen));
++	}
++
++	//Sup_reg_classes(optional)
++	//HT capabilities
++	pframe = rtw_tdls_set_ht_cap(padapter, pframe, pattrib);
++
++	//20/40 BSS coexistence
++	if(pmlmepriv->num_FortyMHzIntolerant>0)
++		iedata |= BIT(2);//20 MHz BSS Width Request
++	pframe = rtw_set_ie(pframe, EID_BSSCoexistence,  1, &iedata, &(pattrib->pktlen));
++
++	//Link identifier
++	plinkid_ie = pframe;
++	_rtw_memcpy(link_id_addr, pattrib->ra, 6);
++	_rtw_memcpy((link_id_addr+6), pattrib->dst, 6);
++	_rtw_memcpy((link_id_addr+12), pattrib->src, 6);
++	pframe = rtw_set_ie(pframe, _LINK_ID_IE_,  18, link_id_addr, &(pattrib->pktlen));
++
++	//fill FTIE mic
++	if(pattrib->encrypt)
++		wpa_tdls_ftie_mic(ptdls_sta->tpk.kck, 2, plinkid_ie, prsnie, ptimeout_ie, pftie, pftie_mic);
++
++#ifdef CONFIG_WFD
++	wfd_ie_tdls( padapter, pframe, &(pattrib->pktlen) );
++#endif //CONFIG_WFD
++
++}
++
++void rtw_build_tdls_setup_cfm_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe)
++{
++
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct pkt_attrib	*pattrib = &pxmitframe->attrib;
++	struct sta_info *ptdls_sta=rtw_get_stainfo( (&padapter->stapriv) , pattrib->dst);
++
++	u8 payload_type = 0x02;	
++	unsigned char category = RTW_WLAN_CATEGORY_TDLS;
++	unsigned char action = TDLS_SETUP_CONFIRM;
++	u8 more_supportedrates = 0;
++	unsigned int ie_len;
++	unsigned char *p;
++	u8 timeout_itvl[5];	//set timeout interval to maximum value
++	struct mlme_priv 		*pmlmepriv = &padapter->mlmepriv;
++	u8	link_id_addr[18] = {0};
++	u8  *pftie, *ptimeout_ie, *plinkid_ie, *prsnie, *pftie_mic;
++
++	//payload type
++	pframe = rtw_set_fixed_ie(pframe, 1, &(payload_type), &(pattrib->pktlen));
++	//category, action, status code, dialog token
++	pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 2, (u8 *)&ptdls_sta->stat_code, &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(ptdls_sta->dialog), &(pattrib->pktlen));
++
++	if(ptdls_sta->stat_code!=0)	//invalid setup request
++		return;
++	
++	//RSNIE
++	if(pattrib->encrypt){
++		prsnie = pframe;
++		pframe = rtw_set_ie(pframe, _RSN_IE_2_, 20, TDLS_RSNIE, &(pattrib->pktlen));
++	}
++	
++	//EDCA param set; WMM param ele.
++	if(pattrib->encrypt){
++		//FTIE
++		pftie = pframe;
++		pftie_mic = pframe+4;
++		_rtw_memset(pframe, 0, 84);	//All fields except SNonce shall be set to 0
++		_rtw_memset(pframe, _FTIE_, 1);	//version
++		_rtw_memset((pframe+1), 82, 1);	//length
++		_rtw_memcpy((pframe+20), ptdls_sta->ANonce, 32);
++		_rtw_memcpy((pframe+52), ptdls_sta->SNonce, 32);
++		pframe += 84;
++		pattrib->pktlen += 84;
++
++		//Timeout interval
++		ptimeout_ie = pframe;
++		timeout_itvl[0]=0x02;
++		_rtw_memcpy(timeout_itvl+1, (u8 *)(&ptdls_sta->TDLS_PeerKey_Lifetime), 4);
++		ptdls_sta->TPK_count=0;
++		_set_timer(&ptdls_sta->TPK_timer, ptdls_sta->TDLS_PeerKey_Lifetime/TPK_RESEND_COUNT);
++		pframe = rtw_set_ie(pframe, _TIMEOUT_ITVL_IE_, 5, timeout_itvl,  &(pattrib->pktlen));
++	}
++
++	//HT operation; todo
++	//Link identifier
++	plinkid_ie = pframe;
++	_rtw_memcpy(link_id_addr, pattrib->ra, 6);
++	_rtw_memcpy((link_id_addr+6), pattrib->src, 6);
++	_rtw_memcpy((link_id_addr+12), pattrib->dst, 6);
++	pframe = rtw_set_ie(pframe, _LINK_ID_IE_,  18, link_id_addr, &(pattrib->pktlen));
++
++	//fill FTIE mic
++	if(pattrib->encrypt)
++		wpa_tdls_ftie_mic(ptdls_sta->tpk.kck, 3, plinkid_ie, prsnie, ptimeout_ie, pftie, pftie_mic);
++
++}
++
++void rtw_build_tdls_teardown_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe)
++{
++
++	struct pkt_attrib	*pattrib = &pxmitframe->attrib;
++	u8 payload_type = 0x02;
++	unsigned char category = RTW_WLAN_CATEGORY_TDLS;
++	unsigned char action = TDLS_TEARDOWN;
++	u8	link_id_addr[18] = {0};
++	
++	struct sta_info *ptdls_sta = rtw_get_stainfo( &(padapter->stapriv) , pattrib->dst);
++	struct sta_priv 	*pstapriv = &padapter->stapriv;
++
++	//payload type
++	pframe = rtw_set_fixed_ie(pframe, 1, &(payload_type), &(pattrib->pktlen));	
++	//category, action, reason code
++	pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, (u8 *)&ptdls_sta->stat_code, &(pattrib->pktlen));
++
++	//Link identifier
++	if(ptdls_sta->tdls_sta_state & TDLS_INITIATOR_STATE){	
++		_rtw_memcpy(link_id_addr, pattrib->ra, 6);
++		_rtw_memcpy((link_id_addr+6), pattrib->src, 6);
++		_rtw_memcpy((link_id_addr+12), pattrib->dst, 6);
++	}else  if(ptdls_sta->tdls_sta_state & TDLS_RESPONDER_STATE){
++		_rtw_memcpy(link_id_addr, pattrib->ra, 6);
++		_rtw_memcpy((link_id_addr+6), pattrib->dst, 6);
++		_rtw_memcpy((link_id_addr+12), pattrib->src, 6);
++	}
++	pframe = rtw_set_ie(pframe, _LINK_ID_IE_,  18, link_id_addr, &(pattrib->pktlen));
++	
++}
++
++void rtw_build_tdls_dis_req_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe)
++{
++
++	struct pkt_attrib	*pattrib = &pxmitframe->attrib;
++	u8 payload_type = 0x02;
++	u8 category = RTW_WLAN_CATEGORY_TDLS;
++	u8 action = TDLS_DISCOVERY_REQUEST;
++	u8	link_id_addr[18] = {0};
++	static u8 dialogtoken=0;
++
++	//payload type
++	pframe = rtw_set_fixed_ie(pframe, 1, &(payload_type), &(pattrib->pktlen));		
++	//category, action, reason code
++	pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(dialogtoken), &(pattrib->pktlen));
++	dialogtoken = (dialogtoken+1)%256;
++
++	//Link identifier
++	_rtw_memcpy(link_id_addr, pattrib->ra, 6);
++	_rtw_memcpy((link_id_addr+6), pattrib->src, 6);
++	_rtw_memcpy((link_id_addr+12), pattrib->dst, 6);
++	pframe = rtw_set_ie(pframe, _LINK_ID_IE_,  18, link_id_addr, &(pattrib->pktlen));
++	
++}
++
++void rtw_build_tdls_dis_rsp_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe, u8 dialog)
++{
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &pmlmeext->mlmext_info;
++	struct pkt_attrib	*pattrib = &pxmitframe->attrib;
++	struct registry_priv	*pregistrypriv = &padapter->registrypriv;
++
++	u8 category = RTW_WLAN_CATEGORY_PUBLIC;
++	u8 action = TDLS_DISCOVERY_RESPONSE;
++	u8 bssrate[NDIS_802_11_LENGTH_RATES_EX];
++ 	int bssrate_len = 0;
++	u8 more_supportedrates = 0;
++	u8 *p;
++	struct mlme_priv 		*pmlmepriv = &padapter->mlmepriv;
++	u8 link_id_addr[18] = {0};
++	u8 iedata=0;
++	u8 timeout_itvl[5];	//set timeout interval to maximum value
++	u32 timeout_interval= TPK_RESEND_COUNT * 1000;
++	
++	//category, action, dialog token
++	pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(dialog), &(pattrib->pktlen));
++
++	//capability
++	_rtw_memcpy(pframe, rtw_get_capability_from_ie(pmlmeinfo->network.IEs), 2);
++
++	if(pattrib->encrypt)
++		*pframe =*pframe | BIT(4);
++	pframe += 2;
++	pattrib->pktlen += 2;
++
++	//supported rates
++	rtw_set_supported_rate(bssrate, WIRELESS_11BG_24N);
++	bssrate_len = IEEE80211_CCK_RATE_LEN + IEEE80211_NUM_OFDM_RATESLEN;
++
++	if (bssrate_len > 8)
++	{
++		pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_ , 8, bssrate, &(pattrib->pktlen));
++		more_supportedrates = 1;
++	}
++	else
++	{
++		pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_ , bssrate_len , bssrate, &(pattrib->pktlen));
++	}
++
++	//extended supported rates
++	if(more_supportedrates==1){
++		pframe = rtw_set_ie(pframe, _EXT_SUPPORTEDRATES_IE_ , (bssrate_len - 8), (bssrate + 8), &(pattrib->pktlen));
++	}
++
++	//supported channels
++	pframe = rtw_tdls_set_sup_ch(pmlmeext, pframe, pattrib);
++
++	//RSNIE
++	if(pattrib->encrypt)
++		pframe = rtw_set_ie(pframe, _RSN_IE_2_, 20, TDLS_RSNIE, &(pattrib->pktlen));
++	
++	//extended capability
++	pframe = rtw_set_ie(pframe, _EXT_CAP_IE_ , 5, TDLS_EXT_CAPIE, &(pattrib->pktlen));
++
++	if(pattrib->encrypt){
++		//FTIE
++		_rtw_memset(pframe, 0, 84);	//All fields shall be set to 0
++		_rtw_memset(pframe, _FTIE_, 1);	//version
++		_rtw_memset((pframe+1), 82, 1);	//length
++		pframe += 84;
++		pattrib->pktlen += 84;
++
++		//Timeout interval
++		timeout_itvl[0]=0x02;
++		_rtw_memcpy(timeout_itvl+1, &timeout_interval, 4);
++		pframe = rtw_set_ie(pframe, _TIMEOUT_ITVL_IE_, 5, timeout_itvl,  &(pattrib->pktlen));
++	}
++
++	//Sup_reg_classes(optional)
++	//HT capabilities
++	pframe = rtw_tdls_set_ht_cap(padapter, pframe, pattrib);
++
++	//20/40 BSS coexistence
++	if(pmlmepriv->num_FortyMHzIntolerant>0)
++		iedata |= BIT(2);//20 MHz BSS Width Request
++	pframe = rtw_set_ie(pframe, EID_BSSCoexistence, 1, &iedata, &(pattrib->pktlen));
++
++	//Link identifier
++	_rtw_memcpy(link_id_addr, pattrib->ra, 6);
++	_rtw_memcpy((link_id_addr+6), pattrib->dst, 6);
++	_rtw_memcpy((link_id_addr+12), pattrib->src, 6);
++	pframe = rtw_set_ie(pframe, _LINK_ID_IE_, 18, link_id_addr, &(pattrib->pktlen));
++	
++}
++
++void rtw_build_tdls_peer_traffic_indication_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe)
++{
++
++	struct pkt_attrib	*pattrib = &pxmitframe->attrib;
++	u8 payload_type = 0x02;
++	unsigned char category = RTW_WLAN_CATEGORY_TDLS;
++	unsigned char action = TDLS_PEER_TRAFFIC_INDICATION;
++
++	u8	link_id_addr[18] = {0};
++	u8 AC_queue=0;
++	struct sta_priv 	*pstapriv = &padapter->stapriv;	
++	struct sta_info *ptdls_sta = rtw_get_stainfo(pstapriv, pattrib->dst);
++
++	//payload type
++	pframe = rtw_set_fixed_ie(pframe, 1, &(payload_type), &(pattrib->pktlen));	
++	//category, action, reason code
++	pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(ptdls_sta->dialog), &(pattrib->pktlen));
++
++	//Link identifier
++	_rtw_memcpy(link_id_addr, pattrib->ra, 6);
++	_rtw_memcpy((link_id_addr+6), pattrib->src, 6);
++	_rtw_memcpy((link_id_addr+12), pattrib->dst, 6);
++	pframe = rtw_set_ie(pframe, _LINK_ID_IE_,  18, link_id_addr, &(pattrib->pktlen));
++
++	//PTI control
++	//PU buffer status
++	if(ptdls_sta->uapsd_bk&BIT(1))
++		AC_queue=BIT(0);
++	if(ptdls_sta->uapsd_be&BIT(1))
++		AC_queue=BIT(1);
++	if(ptdls_sta->uapsd_vi&BIT(1))
++		AC_queue=BIT(2);
++	if(ptdls_sta->uapsd_vo&BIT(1))
++		AC_queue=BIT(3);
++	pframe = rtw_set_ie(pframe, _PTI_BUFFER_STATUS_, 1, &AC_queue, &(pattrib->pktlen));
++	
++}
++
++void rtw_build_tdls_ch_switch_req_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe)
++{
++
++	struct pkt_attrib	*pattrib = &pxmitframe->attrib;
++	struct tdls_info *ptdlsinfo = &padapter->tdlsinfo;
++	u8 payload_type = 0x02;
++	unsigned char category = RTW_WLAN_CATEGORY_TDLS;
++	unsigned char action = TDLS_CHANNEL_SWITCH_REQUEST;
++	u8	link_id_addr[18] = {0};
++	struct sta_priv 	*pstapriv = &padapter->stapriv;	
++	struct sta_info *ptdls_sta = rtw_get_stainfo(pstapriv, pattrib->dst);
++	u8 ch_switch_timing[4] = {0};
++	u16 switch_time= CH_SWITCH_TIME, switch_timeout=CH_SWITCH_TIMEOUT;	
++
++	//payload type
++	pframe = rtw_set_fixed_ie(pframe, 1, &(payload_type), &(pattrib->pktlen));	
++	//category, action, target_ch
++	pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(ptdlsinfo->candidate_ch), &(pattrib->pktlen));
++
++	//Link identifier
++	_rtw_memcpy(link_id_addr, pattrib->ra, 6);
++	_rtw_memcpy((link_id_addr+6), pattrib->src, 6);
++	_rtw_memcpy((link_id_addr+12), pattrib->dst, 6);
++	pframe = rtw_set_ie(pframe, _LINK_ID_IE_,  18, link_id_addr, &(pattrib->pktlen));
++
++	//ch switch timing
++	_rtw_memcpy(ch_switch_timing, &switch_time, 2);
++	_rtw_memcpy(ch_switch_timing+2, &switch_timeout, 2);
++	pframe = rtw_set_ie(pframe, _CH_SWITCH_TIMING_,  4, ch_switch_timing, &(pattrib->pktlen));
++
++	//update ch switch attrib to sta_info
++	ptdls_sta->off_ch=ptdlsinfo->candidate_ch;
++	ptdls_sta->ch_switch_time=switch_time;
++	ptdls_sta->ch_switch_timeout=switch_timeout;
++
++}
++
++void rtw_build_tdls_ch_switch_rsp_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe)
++{
++
++	struct pkt_attrib	*pattrib = &pxmitframe->attrib;
++	u8 payload_type = 0x02;
++	unsigned char category = RTW_WLAN_CATEGORY_TDLS;
++	unsigned char action = TDLS_CHANNEL_SWITCH_RESPONSE;
++	u8	link_id_addr[18] = {0};
++	struct sta_priv 	*pstapriv = &padapter->stapriv;	
++	struct sta_info *ptdls_sta = rtw_get_stainfo(pstapriv, pattrib->dst);
++	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;
++	u8 ch_switch_timing[4] = {0};
++
++	//payload type
++	pframe = rtw_set_fixed_ie(pframe, 1, &(payload_type), &(pattrib->pktlen));	
++	//category, action, status_code
++	pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 2, (u8 *)&ptdls_sta->stat_code, &(pattrib->pktlen));
++
++	//Link identifier
++	_rtw_memcpy(link_id_addr, pattrib->ra, 6);
++	_rtw_memcpy((link_id_addr+6), pattrib->src, 6);
++	_rtw_memcpy((link_id_addr+12), pattrib->dst, 6);
++	pframe = rtw_set_ie(pframe, _LINK_ID_IE_,  18, link_id_addr, &(pattrib->pktlen));
++
++	//ch switch timing
++	_rtw_memcpy(ch_switch_timing, &ptdls_sta->ch_switch_time, 2);
++	_rtw_memcpy(ch_switch_timing+2, &ptdls_sta->ch_switch_timeout, 2);
++	pframe = rtw_set_ie(pframe, _CH_SWITCH_TIMING_,  4, ch_switch_timing, &(pattrib->pktlen));
++
++}
++
++#ifdef CONFIG_WFD
++void rtw_build_tunneled_probe_req_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe)
++{
++
++	struct pkt_attrib	*pattrib = &pxmitframe->attrib;
++	struct wifidirect_info *pwdinfo = &padapter->wdinfo;
++	struct wifidirect_info *pbuddy_wdinfo = &padapter->pbuddy_adapter->wdinfo;
++	u8 payload_type = 0x02;
++	u8 category = RTW_WLAN_CATEGORY_P2P;
++	u8 WFA_OUI[3] = { 0x50, 0x6f, 0x9a};
++	u8 probe_req = 4;
++	u8 wfdielen = 0;
++
++	//payload type
++	pframe = rtw_set_fixed_ie(pframe, 1, &(payload_type), &(pattrib->pktlen));		
++	//category, OUI, frame_body_type
++	pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 3, WFA_OUI, &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(probe_req), &(pattrib->pktlen));
++
++	if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++	{
++		wfdielen = build_probe_req_wfd_ie(pwdinfo, pframe);
++		pframe += wfdielen;
++		pattrib->pktlen += wfdielen;
++	}
++	else if(!rtw_p2p_chk_state(pbuddy_wdinfo, P2P_STATE_NONE))
++	{
++		wfdielen = build_probe_req_wfd_ie(pbuddy_wdinfo, pframe);
++		pframe += wfdielen;
++		pattrib->pktlen += wfdielen;
++	}
++	
++}
++
++void rtw_build_tunneled_probe_rsp_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe)
++{
++
++	struct pkt_attrib	*pattrib = &pxmitframe->attrib;
++	struct wifidirect_info *pwdinfo = &padapter->wdinfo;
++	struct wifidirect_info *pbuddy_wdinfo = &padapter->pbuddy_adapter->wdinfo;
++	u8 payload_type = 0x02;
++	u8 category = RTW_WLAN_CATEGORY_P2P;
++	u8 WFA_OUI[3] = { 0x50, 0x6f, 0x9a};
++	u8 probe_rsp = 5;
++	u8 wfdielen = 0;
++
++	//payload type
++	pframe = rtw_set_fixed_ie(pframe, 1, &(payload_type), &(pattrib->pktlen));		
++	//category, OUI, frame_body_type
++	pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 3, WFA_OUI, &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(probe_rsp), &(pattrib->pktlen));
++
++	if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++	{
++		wfdielen = build_probe_resp_wfd_ie(pwdinfo, pframe, 1);
++		pframe += wfdielen;
++		pattrib->pktlen += wfdielen;
++	}
++	else if(!rtw_p2p_chk_state(pbuddy_wdinfo, P2P_STATE_NONE))
++	{
++		wfdielen = build_probe_resp_wfd_ie(pbuddy_wdinfo, pframe, 1);
++		pframe += wfdielen;
++		pattrib->pktlen += wfdielen;
++	}
++
++}
++#endif //CONFIG_WFD
++
++void _TPK_timer_hdl(void *FunctionContext)
++{
++	struct sta_info *ptdls_sta = (struct sta_info *)FunctionContext;
++
++	ptdls_sta->TPK_count++;
++	//TPK_timer set 1000 as default
++	//retry timer should set at least 301 sec.
++	if(ptdls_sta->TPK_count==TPK_RESEND_COUNT){
++		ptdls_sta->TPK_count=0;
++		issue_tdls_setup_req(ptdls_sta->padapter, ptdls_sta->hwaddr);
++	}
++	
++	_set_timer(&ptdls_sta->TPK_timer, ptdls_sta->TDLS_PeerKey_Lifetime/TPK_RESEND_COUNT);
++}
++
++void init_TPK_timer(_adapter *padapter, struct sta_info *psta)
++{
++	psta->padapter=padapter;
++
++	_init_timer(&psta->TPK_timer, padapter->pnetdev, _TPK_timer_hdl, psta);
++}
++
++// TDLS_DONE_CH_SEN: channel sensing and report candidate channel
++// TDLS_OFF_CH: first time set channel to off channel
++// TDLS_BASE_CH: when go back to the channel linked with AP, send null data to peer STA as an indication
++void _ch_switch_timer_hdl(void *FunctionContext)
++{
++
++	struct sta_info *ptdls_sta = (struct sta_info *)FunctionContext;
++	_adapter *padapter = ptdls_sta->padapter;
++	
++	if( ptdls_sta->option == TDLS_DONE_CH_SEN ){
++		rtw_tdls_cmd(padapter, ptdls_sta->hwaddr, TDLS_DONE_CH_SEN);
++	}else if( ptdls_sta->option == TDLS_OFF_CH ){
++		issue_nulldata_to_TDLS_peer_STA(ptdls_sta->padapter, ptdls_sta, 0);
++		_set_timer(&ptdls_sta->base_ch_timer, 500);
++	}else if( ptdls_sta->option == TDLS_BASE_CH){
++		issue_nulldata_to_TDLS_peer_STA(ptdls_sta->padapter, ptdls_sta, 0);
++	}
++}
++
++void init_ch_switch_timer(_adapter *padapter, struct sta_info *psta)
++{
++	psta->padapter=padapter;
++	_init_timer(&psta->option_timer, padapter->pnetdev, _ch_switch_timer_hdl, psta);
++}
++
++void _base_ch_timer_hdl(void *FunctionContext)
++{
++	struct sta_info *ptdls_sta = (struct sta_info *)FunctionContext;
++	rtw_tdls_cmd(ptdls_sta->padapter, ptdls_sta->hwaddr, TDLS_P_OFF_CH);
++}
++
++void init_base_ch_timer(_adapter *padapter, struct sta_info *psta)
++{
++	psta->padapter=padapter;
++	_init_timer(&psta->base_ch_timer, padapter->pnetdev, _base_ch_timer_hdl, psta);
++}
++
++void _off_ch_timer_hdl(void *FunctionContext)
++{
++	struct sta_info *ptdls_sta = (struct sta_info *)FunctionContext;
++	rtw_tdls_cmd(ptdls_sta->padapter, ptdls_sta->hwaddr, TDLS_P_BASE_CH );
++}
++	
++void init_off_ch_timer(_adapter *padapter, struct sta_info *psta)
++{
++	psta->padapter=padapter;
++	_init_timer(&psta->off_ch_timer, padapter->pnetdev, _off_ch_timer_hdl, psta);
++}
++
++void _tdls_handshake_timer_hdl(void *FunctionContext)
++{
++	struct sta_info *ptdls_sta = (struct sta_info *)FunctionContext;
++
++	if(ptdls_sta != NULL)
++	{
++		if( !(ptdls_sta->tdls_sta_state & TDLS_LINKED_STATE) )
++		{
++			DBG_871X("tdls handshake time out\n");
++			free_tdls_sta(ptdls_sta->padapter, ptdls_sta);
++		}
++	}
++}
++
++void init_handshake_timer(_adapter *padapter, struct sta_info *psta)
++{
++	psta->padapter=padapter;
++	_init_timer(&psta->handshake_timer, padapter->pnetdev, _tdls_handshake_timer_hdl, psta);
++}
++
++//Check tdls peer sta alive.
++void _tdls_alive_timer_phase1_hdl(void *FunctionContext)
++{
++	_irqL irqL;
++	struct sta_info *ptdls_sta = (struct sta_info *)FunctionContext;
++	_adapter *padapter = ptdls_sta->padapter;
++	struct tdls_info *ptdlsinfo = &padapter->tdlsinfo;
++	
++	_enter_critical_bh(&ptdlsinfo->hdl_lock, &irqL);
++	ptdls_sta->timer_flag = 1;
++	_exit_critical_bh(&ptdlsinfo->hdl_lock, &irqL);
++
++	ptdls_sta->tdls_sta_state &= (~TDLS_ALIVE_STATE);
++
++	DBG_871X("issue_tdls_dis_req to check alive\n");
++	issue_tdls_dis_req( padapter, ptdls_sta->hwaddr);
++	rtw_tdls_cmd(padapter, ptdls_sta->hwaddr, TDLS_CKALV_PH1);
++	sta_update_last_rx_pkts(ptdls_sta);
++
++	if (	ptdls_sta->timer_flag == 2 )
++		rtw_tdls_cmd(padapter, ptdls_sta->hwaddr, TDLS_FREE_STA);		
++	else
++	{
++		_enter_critical_bh(&ptdlsinfo->hdl_lock, &irqL);
++		ptdls_sta->timer_flag = 0;
++		_exit_critical_bh(&ptdlsinfo->hdl_lock, &irqL);
++	}
++
++}
++
++void _tdls_alive_timer_phase2_hdl(void *FunctionContext)
++{
++	_irqL irqL;
++	struct sta_info *ptdls_sta = (struct sta_info *)FunctionContext;
++	_adapter *padapter = ptdls_sta->padapter;
++	struct tdls_info *ptdlsinfo = &padapter->tdlsinfo;
++	
++	_enter_critical_bh(&(ptdlsinfo->hdl_lock), &irqL);
++	ptdls_sta->timer_flag = 1;
++	_exit_critical_bh(&ptdlsinfo->hdl_lock, &irqL);
++
++	if( (ptdls_sta->tdls_sta_state & TDLS_ALIVE_STATE) && 
++		(sta_last_rx_pkts(ptdls_sta) + 3 <= sta_rx_pkts(ptdls_sta)) )
++	{
++		DBG_871X("TDLS STA ALIVE, ptdls_sta->sta_stats.last_rx_pkts:%llu, ptdls_sta->sta_stats.rx_pkts:%llu\n",
++			sta_last_rx_pkts(ptdls_sta), sta_rx_pkts(ptdls_sta));
++
++		ptdls_sta->alive_count = 0;
++		rtw_tdls_cmd(padapter, ptdls_sta->hwaddr, TDLS_CKALV_PH2);
++	}
++	else
++	{
++		if( !(ptdls_sta->tdls_sta_state & TDLS_ALIVE_STATE) )
++			DBG_871X("TDLS STA TOO FAR\n");
++		if( !(sta_last_rx_pkts(ptdls_sta) + 3 <= sta_rx_pkts(ptdls_sta)))
++			DBG_871X("TDLS LINK WITH LOW TRAFFIC, ptdls_sta->sta_stats.last_rx_pkts:%llu, ptdls_sta->sta_stats.rx_pkts:%llu\n",
++				sta_last_rx_pkts(ptdls_sta), sta_rx_pkts(ptdls_sta));
++
++		ptdls_sta->alive_count++;
++		if( ptdls_sta->alive_count == TDLS_ALIVE_COUNT )
++		{
++			ptdls_sta->stat_code = _RSON_TDLS_TEAR_TOOFAR_;
++			issue_tdls_teardown(padapter, ptdls_sta->hwaddr);
++		}
++		else
++		{
++			rtw_tdls_cmd(padapter, ptdls_sta->hwaddr, TDLS_CKALV_PH2);
++		}
++	}
++
++	if (	ptdls_sta->timer_flag == 2 )
++		rtw_tdls_cmd(padapter, ptdls_sta->hwaddr, TDLS_FREE_STA);		
++	else
++	{
++		_enter_critical_bh(&(ptdlsinfo->hdl_lock), &irqL);
++		ptdls_sta->timer_flag = 0;
++		_exit_critical_bh(&ptdlsinfo->hdl_lock, &irqL);
++}
++
++}
++
++void init_tdls_alive_timer(_adapter *padapter, struct sta_info *psta)
++{
++	psta->padapter=padapter;
++	_init_timer(&psta->alive_timer1, padapter->pnetdev, _tdls_alive_timer_phase1_hdl, psta);
++	_init_timer(&psta->alive_timer2, padapter->pnetdev, _tdls_alive_timer_phase2_hdl, psta);
++}
++
++int update_sgi_tdls(_adapter *padapter, struct sta_info *psta)
++{
++	struct ht_priv	*psta_ht = NULL;
++	psta_ht = &psta->htpriv;
++
++	if(psta_ht->ht_option)
++	{
++		return psta_ht->sgi;
++	}
++	else
++		return _FALSE;
++}
++
++u32 update_mask_tdls(_adapter *padapter, struct sta_info *psta)
++{
++	int i;
++	u8 rf_type, id;
++	unsigned char sta_band = 0;
++	unsigned char limit;	
++	unsigned int tx_ra_bitmap=0;
++	struct ht_priv	*psta_ht = NULL;
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	WLAN_BSSID_EX *pcur_network = (WLAN_BSSID_EX *)&pmlmepriv->cur_network.network;
++
++	psta_ht = &psta->htpriv;
++	//b/g mode ra_bitmap  
++	for (i=0; i<sizeof(psta->bssrateset); i++)
++	{
++		if (psta->bssrateset[i])
++			tx_ra_bitmap |= rtw_get_bit_value_from_ieee_value(psta->bssrateset[i]&0x7f);
++	}
++
++	//n mode ra_bitmap
++	if(psta_ht->ht_option) 
++	{
++		rtw_hal_get_hwreg(padapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type));
++		if(rf_type == RF_2T2R)
++			limit=16;// 2R
++		else
++			limit=8;//  1R
++
++		for (i=0; i<limit; i++) {
++			if (psta_ht->ht_cap.supp_mcs_set[i/8] & BIT(i%8))
++				tx_ra_bitmap |= BIT(i+12);
++		}
++	}
++
++	if ( pcur_network->Configuration.DSConfig > 14 ) {
++		// 5G band
++		if (tx_ra_bitmap & 0xffff000)
++			sta_band |= WIRELESS_11_5N | WIRELESS_11A;
++		else
++			sta_band |= WIRELESS_11A;
++	} else {
++		if (tx_ra_bitmap & 0xffff000)
++			sta_band |= WIRELESS_11_24N | WIRELESS_11G | WIRELESS_11B;
++		else if (tx_ra_bitmap & 0xff0)
++			sta_band |= WIRELESS_11G |WIRELESS_11B;
++		else
++			sta_band |= WIRELESS_11B;
++	}
++
++	id = networktype_to_raid(sta_band);
++	tx_ra_bitmap |= ((id<<28)&0xf0000000);
++	return tx_ra_bitmap;
++}
++
++#endif //CONFIG_TDLS
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_wlan_util.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_wlan_util.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_wlan_util.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_wlan_util.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,2305 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _RTW_WLAN_UTIL_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <wifi.h>
++
++
++unsigned char ARTHEROS_OUI1[] = {0x00, 0x03, 0x7f};
++unsigned char ARTHEROS_OUI2[] = {0x00, 0x13, 0x74};
++
++unsigned char BROADCOM_OUI1[] = {0x00, 0x10, 0x18};
++unsigned char BROADCOM_OUI2[] = {0x00, 0x0a, 0xf7};
++unsigned char BROADCOM_OUI3[] = {0x00, 0x05, 0xb5};
++
++unsigned char CISCO_OUI[] = {0x00, 0x40, 0x96};
++unsigned char MARVELL_OUI[] = {0x00, 0x50, 0x43};
++unsigned char RALINK_OUI[] = {0x00, 0x0c, 0x43};
++unsigned char REALTEK_OUI[] = {0x00, 0xe0, 0x4c};
++unsigned char AIRGOCAP_OUI[] = {0x00, 0x0a, 0xf5};
++
++unsigned char REALTEK_96B_IE[] = {0x00, 0xe0, 0x4c, 0x02, 0x01, 0x20};
++
++extern unsigned char	MCS_rate_2R[16];
++#ifdef CONFIG_DISABLE_MCS13TO15
++extern unsigned char	MCS_rate_2R_MCS13TO15_OFF[16];
++#endif //CONFIG_DISABLE_MCS13TO15
++extern unsigned char	MCS_rate_1R[16];
++extern unsigned char RTW_WPA_OUI[];
++extern unsigned char WPA_TKIP_CIPHER[4];
++extern unsigned char RSN_TKIP_CIPHER[4];
++
++#define R2T_PHY_DELAY	(0)
++
++//#define WAIT_FOR_BCN_TO_MIN	(3000)
++#define WAIT_FOR_BCN_TO_MIN	(6000)
++#define WAIT_FOR_BCN_TO_MAX	(20000)
++
++static u8 rtw_basic_rate_cck[4] = {
++	IEEE80211_CCK_RATE_1MB|IEEE80211_BASIC_RATE_MASK, IEEE80211_CCK_RATE_2MB|IEEE80211_BASIC_RATE_MASK,
++	IEEE80211_CCK_RATE_5MB|IEEE80211_BASIC_RATE_MASK, IEEE80211_CCK_RATE_11MB|IEEE80211_BASIC_RATE_MASK
++};
++
++static u8 rtw_basic_rate_ofdm[3] = {
++	IEEE80211_OFDM_RATE_6MB|IEEE80211_BASIC_RATE_MASK, IEEE80211_OFDM_RATE_12MB|IEEE80211_BASIC_RATE_MASK,
++	IEEE80211_OFDM_RATE_24MB|IEEE80211_BASIC_RATE_MASK
++};
++
++static u8 rtw_basic_rate_mix[7] = {
++	IEEE80211_CCK_RATE_1MB|IEEE80211_BASIC_RATE_MASK, IEEE80211_CCK_RATE_2MB|IEEE80211_BASIC_RATE_MASK,
++	IEEE80211_CCK_RATE_5MB|IEEE80211_BASIC_RATE_MASK, IEEE80211_CCK_RATE_11MB|IEEE80211_BASIC_RATE_MASK,
++	IEEE80211_OFDM_RATE_6MB|IEEE80211_BASIC_RATE_MASK, IEEE80211_OFDM_RATE_12MB|IEEE80211_BASIC_RATE_MASK,
++	IEEE80211_OFDM_RATE_24MB|IEEE80211_BASIC_RATE_MASK
++};
++
++
++int cckrates_included(unsigned char *rate, int ratelen)
++{
++	int	i;
++	
++	for(i = 0; i < ratelen; i++)
++	{
++		if  (  (((rate[i]) & 0x7f) == 2)	|| (((rate[i]) & 0x7f) == 4) ||
++			   (((rate[i]) & 0x7f) == 11)  || (((rate[i]) & 0x7f) == 22) )
++		return _TRUE;	
++	}
++
++	return _FALSE;
++
++}
++
++int cckratesonly_included(unsigned char *rate, int ratelen)
++{
++	int	i;
++	
++	for(i = 0; i < ratelen; i++)
++	{
++		if  ( (((rate[i]) & 0x7f) != 2) && (((rate[i]) & 0x7f) != 4) &&
++			   (((rate[i]) & 0x7f) != 11)  && (((rate[i]) & 0x7f) != 22) )
++		return _FALSE;	
++	}
++	
++	return _TRUE;
++}
++
++unsigned char networktype_to_raid(unsigned char network_type)
++{
++	unsigned char raid;
++
++	switch(network_type)
++	{
++		case WIRELESS_11B:
++			raid = 6;
++			break;
++		case WIRELESS_11A:
++		case WIRELESS_11G:
++			raid = 5;
++			break;
++		case WIRELESS_11BG:
++			raid = 4;
++			break;
++		case WIRELESS_11_24N:
++		case WIRELESS_11_5N:
++			raid = 3;
++			break;
++		case WIRELESS_11A_5N:
++		case WIRELESS_11G_24N:
++			raid = 1;
++			break;
++		case WIRELESS_11BG_24N:
++			raid = 0;
++			break;
++		default:
++			raid = 4;
++			break;	
++
++	}
++
++	return raid;
++	
++}
++
++int judge_network_type(_adapter *padapter, unsigned char *rate, int ratelen)
++{
++	int network_type = 0;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	
++
++	if(pmlmeext->cur_channel > 14)
++	{
++		if (pmlmeinfo->HT_enable)
++		{
++			network_type = WIRELESS_11_5N;
++		}
++	
++		network_type |= WIRELESS_11A;
++	}
++	else
++	{
++		if (pmlmeinfo->HT_enable)
++		{
++			network_type = WIRELESS_11_24N;
++		}
++
++		if ((cckratesonly_included(rate, ratelen)) == _TRUE)
++		{
++			network_type |= WIRELESS_11B;
++		}
++		else if((cckrates_included(rate, ratelen)) == _TRUE)
++		{
++			network_type |= WIRELESS_11BG;
++		}
++		else
++		{
++			network_type |= WIRELESS_11G;
++		}
++	}
++		
++	return 	network_type;
++}
++
++unsigned char ratetbl_val_2wifirate(unsigned char rate);
++unsigned char ratetbl_val_2wifirate(unsigned char rate)
++{
++	unsigned char val = 0;
++
++	switch (rate & 0x7f) 
++	{
++		case 0:
++			val = IEEE80211_CCK_RATE_1MB;
++			break;
++
++		case 1:
++			val = IEEE80211_CCK_RATE_2MB;
++			break;
++
++		case 2:
++			val = IEEE80211_CCK_RATE_5MB;
++			break;
++
++		case 3:
++			val = IEEE80211_CCK_RATE_11MB;
++			break;
++			
++		case 4:
++			val = IEEE80211_OFDM_RATE_6MB;
++			break;
++
++		case 5:
++			val = IEEE80211_OFDM_RATE_9MB;
++			break;
++
++		case 6:
++			val = IEEE80211_OFDM_RATE_12MB;
++			break;
++			
++		case 7:
++			val = IEEE80211_OFDM_RATE_18MB;
++			break;
++
++		case 8:
++			val = IEEE80211_OFDM_RATE_24MB;
++			break;
++			
++		case 9:
++			val = IEEE80211_OFDM_RATE_36MB;
++			break;
++
++		case 10:
++			val = IEEE80211_OFDM_RATE_48MB;
++			break;
++		
++		case 11:
++			val = IEEE80211_OFDM_RATE_54MB;
++			break;
++
++	}
++
++	return val;
++
++}
++
++int is_basicrate(_adapter *padapter, unsigned char rate);
++int is_basicrate(_adapter *padapter, unsigned char rate)
++{
++	int i;
++	unsigned char val;
++	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
++	
++	for(i = 0; i < NumRates; i++)
++	{
++		val = pmlmeext->basicrate[i];
++
++		if ((val != 0xff) && (val != 0xfe))
++		{
++			if (rate == ratetbl_val_2wifirate(val))
++			{
++				return _TRUE;
++			}
++		}
++	}
++	
++	return _FALSE;
++}
++
++unsigned int ratetbl2rateset(_adapter *padapter, unsigned char *rateset);
++unsigned int ratetbl2rateset(_adapter *padapter, unsigned char *rateset)
++{
++	int i;
++	unsigned char rate;
++	unsigned int	len = 0;
++	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
++
++	for (i = 0; i < NumRates; i++)
++	{
++		rate = pmlmeext->datarate[i];
++
++		switch (rate)
++		{
++			case 0xff:
++				return len;
++				
++			case 0xfe:
++				continue;
++				
++			default:
++				rate = ratetbl_val_2wifirate(rate);
++
++				if (is_basicrate(padapter, rate) == _TRUE)
++				{
++					rate |= IEEE80211_BASIC_RATE_MASK;
++				}
++				
++				rateset[len] = rate;
++				len++;
++				break;
++		}
++	}
++	return len;
++}
++
++
++void get_rate_set(_adapter *padapter, unsigned char *pbssrate, int *bssrate_len)
++{
++	unsigned char supportedrates[NumRates];
++
++	_rtw_memset(supportedrates, 0, NumRates);
++	*bssrate_len = ratetbl2rateset(padapter, supportedrates);
++	_rtw_memcpy(pbssrate, supportedrates, *bssrate_len);
++}
++
++void UpdateBrateTbl(
++	IN PADAPTER		Adapter,
++	IN u8			*mBratesOS
++)
++{
++	u8	i;
++	u8	rate;
++
++	// 1M, 2M, 5.5M, 11M, 6M, 12M, 24M are mandatory.
++	for(i=0;i<NDIS_802_11_LENGTH_RATES_EX;i++)
++	{
++		rate = mBratesOS[i] & 0x7f;
++		switch(rate)
++		{
++			case IEEE80211_CCK_RATE_1MB:
++			case IEEE80211_CCK_RATE_2MB:
++			case IEEE80211_CCK_RATE_5MB:
++			case IEEE80211_CCK_RATE_11MB:
++			case IEEE80211_OFDM_RATE_6MB:
++			case IEEE80211_OFDM_RATE_12MB:
++			case IEEE80211_OFDM_RATE_24MB:
++				mBratesOS[i] |= IEEE80211_BASIC_RATE_MASK;
++				break;
++		}
++	}
++
++}
++
++void UpdateBrateTblForSoftAP(u8 *bssrateset, u32 bssratelen)
++{
++	u8	i;
++	u8	rate;
++
++	for(i=0;i<bssratelen;i++)
++	{
++		rate = bssrateset[i] & 0x7f;
++		switch(rate)
++		{
++			case IEEE80211_CCK_RATE_1MB:
++			case IEEE80211_CCK_RATE_2MB:
++			case IEEE80211_CCK_RATE_5MB:
++			case IEEE80211_CCK_RATE_11MB:
++				bssrateset[i] |= IEEE80211_BASIC_RATE_MASK;
++				break;
++		}
++	}
++
++}
++
++void Save_DM_Func_Flag(_adapter *padapter)
++{
++	u8	bSaveFlag = _TRUE;
++
++#ifdef CONFIG_CONCURRENT_MODE	
++	_adapter *pbuddy_adapter = padapter->pbuddy_adapter;
++	if(pbuddy_adapter)
++	rtw_hal_set_hwreg(pbuddy_adapter, HW_VAR_DM_FUNC_OP, (u8 *)(&bSaveFlag));
++#endif
++
++	rtw_hal_set_hwreg(padapter, HW_VAR_DM_FUNC_OP, (u8 *)(&bSaveFlag));
++
++}
++
++void Restore_DM_Func_Flag(_adapter *padapter)
++{
++	u8	bSaveFlag = _FALSE;
++#ifdef CONFIG_CONCURRENT_MODE	
++	_adapter *pbuddy_adapter = padapter->pbuddy_adapter;
++	if(pbuddy_adapter)
++	rtw_hal_set_hwreg(pbuddy_adapter, HW_VAR_DM_FUNC_OP, (u8 *)(&bSaveFlag));
++#endif
++	rtw_hal_set_hwreg(padapter, HW_VAR_DM_FUNC_OP, (u8 *)(&bSaveFlag));
++}
++
++void Switch_DM_Func(_adapter *padapter, u8 mode, u8 enable)
++{
++#ifdef CONFIG_CONCURRENT_MODE	
++	_adapter *pbuddy_adapter = padapter->pbuddy_adapter;
++#endif
++
++	if(enable == _TRUE)
++	{
++#ifdef CONFIG_CONCURRENT_MODE
++		if(pbuddy_adapter)
++		rtw_hal_set_hwreg(pbuddy_adapter, HW_VAR_DM_FUNC_SET, (u8 *)(&mode));
++#endif
++		rtw_hal_set_hwreg(padapter, HW_VAR_DM_FUNC_SET, (u8 *)(&mode));
++	}
++	else
++	{
++#ifdef CONFIG_CONCURRENT_MODE
++		if(pbuddy_adapter)
++		rtw_hal_set_hwreg(pbuddy_adapter, HW_VAR_DM_FUNC_CLR, (u8 *)(&mode));
++#endif
++		rtw_hal_set_hwreg(padapter, HW_VAR_DM_FUNC_CLR, (u8 *)(&mode));
++	}
++
++#if 0
++	u8 val8;
++
++	val8 = rtw_read8(padapter, FW_DYNAMIC_FUN_SWITCH);
++
++	if(enable == _TRUE)
++	{
++		rtw_write8(padapter, FW_DYNAMIC_FUN_SWITCH, (val8 | mode));
++	}
++	else
++	{
++		rtw_write8(padapter, FW_DYNAMIC_FUN_SWITCH, (val8 & mode));
++	}
++#endif
++
++}
++
++static void Set_NETYPE1_MSR(_adapter *padapter, u8 type)
++{
++	rtw_hal_set_hwreg(padapter, HW_VAR_MEDIA_STATUS1, (u8 *)(&type));
++}
++
++static void Set_NETYPE0_MSR(_adapter *padapter, u8 type)
++{
++	rtw_hal_set_hwreg(padapter, HW_VAR_MEDIA_STATUS, (u8 *)(&type));
++}
++
++void Set_MSR(_adapter *padapter, u8 type)
++{
++#ifdef CONFIG_CONCURRENT_MODE
++	if(padapter->iface_type == IFACE_PORT1)
++	{
++		Set_NETYPE1_MSR(padapter, type);
++	}
++	else
++#endif
++	{
++		Set_NETYPE0_MSR(padapter, type);
++	}
++}
++
++inline u8 rtw_get_oper_ch(_adapter *adapter)
++{
++	return adapter_to_dvobj(adapter)->oper_channel;
++}
++
++inline void rtw_set_oper_ch(_adapter *adapter, u8 ch)
++{
++	if (adapter_to_dvobj(adapter)->oper_channel != ch)
++		adapter_to_dvobj(adapter)->on_oper_ch_time = rtw_get_current_time();
++
++	adapter_to_dvobj(adapter)->oper_channel = ch;
++}
++
++inline u8 rtw_get_oper_bw(_adapter *adapter)
++{
++	return adapter_to_dvobj(adapter)->oper_bwmode;
++}
++
++inline void rtw_set_oper_bw(_adapter *adapter, u8 bw)
++{
++	adapter_to_dvobj(adapter)->oper_bwmode = bw;
++}
++
++inline u8 rtw_get_oper_choffset(_adapter *adapter)
++{
++	return adapter_to_dvobj(adapter)->oper_ch_offset;
++}
++
++inline void rtw_set_oper_choffset(_adapter *adapter, u8 offset)
++{
++	adapter_to_dvobj(adapter)->oper_ch_offset = offset;
++}
++
++inline u32 rtw_get_on_oper_ch_time(_adapter *adapter)
++{
++	return adapter_to_dvobj(adapter)->on_oper_ch_time;
++}
++
++inline u32 rtw_get_on_cur_ch_time(_adapter *adapter)
++{
++	if (adapter->mlmeextpriv.cur_channel == adapter_to_dvobj(adapter)->oper_channel)
++		return adapter_to_dvobj(adapter)->on_oper_ch_time;
++	else
++		return 0;
++}
++
++void SelectChannel(_adapter *padapter, unsigned char channel)
++{
++	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;	
++
++#ifdef CONFIG_DUALMAC_CONCURRENT
++	//saved channel info
++	rtw_set_oper_ch(padapter, channel);
++	dc_SelectChannel(padapter, channel);
++#else //CONFIG_DUALMAC_CONCURRENT
++
++	_enter_critical_mutex(&(adapter_to_dvobj(padapter)->setch_mutex), NULL);
++	
++	//saved channel info
++	rtw_set_oper_ch(padapter, channel);
++
++	rtw_hal_set_chan(padapter, channel);
++	
++	_exit_critical_mutex(&(adapter_to_dvobj(padapter)->setch_mutex), NULL);
++
++#endif // CONFIG_DUALMAC_CONCURRENT
++}
++
++void SetBWMode(_adapter *padapter, unsigned short bwmode, unsigned char channel_offset)
++{
++	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
++
++#ifdef CONFIG_DUALMAC_CONCURRENT
++	//saved bw info
++	rtw_set_oper_bw(padapter, bwmode);
++	rtw_set_oper_choffset(padapter, channel_offset);
++	dc_SetBWMode(padapter, bwmode, channel_offset);
++#else //CONFIG_DUALMAC_CONCURRENT
++
++	_enter_critical_mutex(&(adapter_to_dvobj(padapter)->setbw_mutex), NULL);
++
++	//saved bw info
++	rtw_set_oper_bw(padapter, bwmode);
++	rtw_set_oper_choffset(padapter, channel_offset);
++
++	rtw_hal_set_bwmode(padapter, (HT_CHANNEL_WIDTH)bwmode, channel_offset);
++
++	_exit_critical_mutex(&(adapter_to_dvobj(padapter)->setbw_mutex), NULL);
++
++#endif // CONFIG_DUALMAC_CONCURRENT
++}
++
++void set_channel_bwmode(_adapter *padapter, unsigned char channel, unsigned char channel_offset, unsigned short bwmode)
++{
++	u8 center_ch;
++	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
++
++	if ( padapter->bNotifyChannelChange )
++	{
++		DBG_871X( "[%s] ch = %d, offset = %d, bwmode = %d\n", __FUNCTION__, channel, channel_offset, bwmode );
++	}
++
++	if((bwmode == HT_CHANNEL_WIDTH_20)||(channel_offset == HAL_PRIME_CHNL_OFFSET_DONT_CARE))
++	{
++		//SelectChannel(padapter, channel);
++		center_ch = channel;
++	}
++	else		
++	{
++		//switch to the proper channel
++		if (channel_offset == HAL_PRIME_CHNL_OFFSET_LOWER)
++		{
++			//SelectChannel(padapter, channel + 2);
++			center_ch = channel + 2;
++		}
++		else
++		{
++			//SelectChannel(padapter, channel - 2);
++			center_ch = channel - 2;
++		}
++	}	
++
++	//set Channel , must be independant for correct co_ch value/
++#ifdef CONFIG_DUALMAC_CONCURRENT
++	//saved channel/bw info
++	rtw_set_oper_ch(padapter, channel);
++	rtw_set_oper_bw(padapter, bwmode);
++	rtw_set_oper_choffset(padapter, channel_offset);
++	dc_SelectChannel(padapter, center_ch);// set center channel
++#else //CONFIG_DUALMAC_CONCURRENT
++	
++	_enter_critical_mutex(&(adapter_to_dvobj(padapter)->setch_mutex), NULL);
++	
++	//saved channel/bw info
++	rtw_set_oper_ch(padapter, channel);
++	rtw_set_oper_bw(padapter, bwmode);
++	rtw_set_oper_choffset(padapter, channel_offset);
++
++	rtw_hal_set_chan(padapter, center_ch);
++
++        _exit_critical_mutex(&(adapter_to_dvobj(padapter)->setch_mutex), NULL);
++
++#endif // CONFIG_DUALMAC_CONCURRENT
++
++
++	//set BandWidth
++	SetBWMode(padapter, bwmode, channel_offset);
++	
++}
++
++int get_bsstype(unsigned short capability)
++{
++	if (capability & BIT(0))
++	{
++		return WIFI_FW_AP_STATE;
++	}
++	else if (capability & BIT(1))
++	{
++		return WIFI_FW_ADHOC_STATE;
++	}
++	else
++	{
++		return 0;		
++	}
++}
++
++__inline u8 *get_my_bssid(WLAN_BSSID_EX *pnetwork)
++{	
++	return (pnetwork->MacAddress); 
++}
++
++u16 get_beacon_interval(WLAN_BSSID_EX *bss)
++{
++	unsigned short val;
++	_rtw_memcpy((unsigned char *)&val, rtw_get_beacon_interval_from_ie(bss->IEs), 2);
++
++	return le16_to_cpu(val);	
++
++}
++
++int is_client_associated_to_ap(_adapter *padapter)
++{
++	struct mlme_ext_priv	*pmlmeext;
++	struct mlme_ext_info	*pmlmeinfo;
++
++	if(!padapter)
++		return _FAIL;
++
++	pmlmeext = &padapter->mlmeextpriv;
++	pmlmeinfo = &(pmlmeext->mlmext_info);
++	
++	if ((pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS) && ((pmlmeinfo->state&0x03) == WIFI_FW_STATION_STATE))
++	{
++		return _TRUE;
++	}
++	else
++	{
++		return _FAIL;
++	}
++}
++
++int is_client_associated_to_ibss(_adapter *padapter)
++{
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	
++	if ((pmlmeinfo->state & WIFI_FW_ASSOC_SUCCESS) && ((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE))
++	{
++		return _TRUE;
++	}
++	else
++	{
++		return _FAIL;
++	}
++}
++
++int is_IBSS_empty(_adapter *padapter)
++{
++	unsigned int i;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	
++	for (i = IBSS_START_MAC_ID; i < NUM_STA; i++)
++	{
++		if (pmlmeinfo->FW_sta_info[i].status == 1)
++		{
++			return _FAIL;
++		}
++	}
++	
++	return _TRUE;
++	
++}
++
++unsigned int decide_wait_for_beacon_timeout(unsigned int bcn_interval)
++{
++	if ((bcn_interval << 2) < WAIT_FOR_BCN_TO_MIN)
++	{
++		return WAIT_FOR_BCN_TO_MIN;
++	} 
++	else if ((bcn_interval << 2) > WAIT_FOR_BCN_TO_MAX)
++	{
++		return WAIT_FOR_BCN_TO_MAX;
++	}	
++	else
++	{
++		return ((bcn_interval << 2));
++	}
++}
++
++void CAM_empty_entry(
++	PADAPTER     	Adapter,	
++	u8 			ucIndex
++)
++{
++	rtw_hal_set_hwreg(Adapter, HW_VAR_CAM_EMPTY_ENTRY, (u8 *)(&ucIndex));
++}
++
++void invalidate_cam_all(_adapter *padapter)
++{
++	rtw_hal_set_hwreg(padapter, HW_VAR_CAM_INVALID_ALL, 0);
++}
++#if 0
++static u32 _ReadCAM(_adapter *padapter ,u32 addr)
++{
++	u32 count = 0, cmd;
++	cmd = CAM_POLLINIG |addr ;
++	rtw_write32(padapter, RWCAM, cmd);
++
++	do{
++		if(0 == (rtw_read32(padapter,REG_CAMCMD) & CAM_POLLINIG)){
++			break;
++		}
++	}while(count++ < 100);		
++
++	return rtw_read32(padapter,REG_CAMREAD);	
++}
++void read_cam(_adapter *padapter ,u8 entry)
++{
++	u32	j,count = 0, addr, cmd;
++	addr = entry << 3;
++
++	printk("********* DUMP CAM Entry_#%02d***************\n",entry);
++	for (j = 0; j < 6; j++)
++	{	
++		cmd = _ReadCAM(padapter ,addr+j);
++		printk("offset:0x%02x => 0x%08x \n",addr+j,cmd);
++	}
++	printk("*********************************\n");
++}
++#endif
++
++void write_cam(_adapter *padapter, u8 entry, u16 ctrl, u8 *mac, u8 *key)
++{
++	unsigned int	i, val, addr;
++	//unsigned int    cmd;
++	int j;
++	u32	cam_val[2];
++
++	addr = entry << 3;
++
++	for (j = 5; j >= 0; j--)
++	{	
++		switch (j)
++		{
++			case 0:
++				val = (ctrl | (mac[0] << 16) | (mac[1] << 24) );
++				break;
++				
++			case 1:
++				val = (mac[2] | ( mac[3] << 8) | (mac[4] << 16) | (mac[5] << 24));
++				break;
++			
++			default:
++				i = (j - 2) << 2;
++				val = (key[i] | (key[i+1] << 8) | (key[i+2] << 16) | (key[i+3] << 24));
++				break;
++				
++		}
++
++		cam_val[0] = val;
++		cam_val[1] = addr + (unsigned int)j;
++
++		rtw_hal_set_hwreg(padapter, HW_VAR_CAM_WRITE, (u8 *)cam_val);
++		
++		//rtw_write32(padapter, WCAMI, val);
++		
++		//cmd = CAM_POLLINIG | CAM_WRITE | (addr + j);
++		//rtw_write32(padapter, RWCAM, cmd);
++		
++		//DBG_871X("%s=> cam write: %x, %x\n",__FUNCTION__, cmd, val);
++		
++	}
++
++}
++
++void clear_cam_entry(_adapter *padapter, u8 entry)
++{	
++#if 0
++	u32	addr, val=0;
++	u32	cam_val[2];
++
++	addr = entry << 3;
++	
++
++	cam_val[0] = val;
++	cam_val[1] = addr + (unsigned int)0;
++
++	rtw_hal_set_hwreg(padapter, HW_VAR_CAM_WRITE, (u8 *)cam_val);
++
++
++
++	cam_val[0] = val;
++	cam_val[1] = addr + (unsigned int)1;
++
++	rtw_hal_set_hwreg(padapter, HW_VAR_CAM_WRITE, (u8 *)cam_val);
++#else
++
++	unsigned char null_sta[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
++
++	unsigned char null_key[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,0x00, 0x00, 0x00, 0x00,0x00, 0x00, 0x00, 0x00};
++
++	write_cam(padapter, entry, 0, null_sta, null_key);
++
++#endif
++}
++
++int allocate_fw_sta_entry(_adapter *padapter)
++{
++	unsigned int mac_id;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	
++	for (mac_id = IBSS_START_MAC_ID; mac_id < NUM_STA; mac_id++)
++	{
++		if (pmlmeinfo->FW_sta_info[mac_id].status == 0)
++		{
++			pmlmeinfo->FW_sta_info[mac_id].status = 1;
++			pmlmeinfo->FW_sta_info[mac_id].retry = 0;
++			break;
++		}
++	}
++	
++	return mac_id;
++}
++
++void flush_all_cam_entry(_adapter *padapter)
++{
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++#ifdef CONFIG_CONCURRENT_MODE
++
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++
++	//if(check_buddy_mlmeinfo_state(padapter, _HW_STATE_NOLINK_))	
++	if(check_buddy_fwstate(padapter, _FW_LINKED) == _FALSE)
++	{
++		rtw_hal_set_hwreg(padapter, HW_VAR_CAM_INVALID_ALL, 0);		
++	}
++	else
++	{
++		if(check_fwstate(pmlmepriv, WIFI_STATION_STATE))
++		{
++			struct sta_priv	*pstapriv = &padapter->stapriv;
++			struct sta_info	*psta;
++			u8 cam_id;//cam_entry
++
++			psta = rtw_get_stainfo(pstapriv, pmlmeinfo->network.MacAddress);
++			if(psta) {
++				if(psta->state & WIFI_AP_STATE)
++				{}   //clear cam when ap free per sta_info        
++				else {
++					if(psta->mac_id==2)
++						cam_id = 5;
++					else
++						cam_id = 4;
++				}
++				//clear_cam_entry(padapter, cam_id);
++				rtw_clearstakey_cmd(padapter, (u8*)psta, cam_id, _FALSE);
++			}
++		}
++		else if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE)
++		{
++			//clear cam when ap free per sta_info 
++		}			
++	}
++#else //CONFIG_CONCURRENT_MODE
++
++	rtw_hal_set_hwreg(padapter, HW_VAR_CAM_INVALID_ALL, 0);	
++
++#endif //CONFIG_CONCURRENT_MODE
++
++	_rtw_memset((u8 *)(pmlmeinfo->FW_sta_info), 0, sizeof(pmlmeinfo->FW_sta_info));
++
++}
++
++#if defined(CONFIG_P2P) && defined(CONFIG_WFD)
++int WFD_info_handler(_adapter *padapter, PNDIS_802_11_VARIABLE_IEs	pIE)
++{
++	struct registry_priv	*pregpriv = &padapter->registrypriv;
++	struct mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct wifidirect_info	*pwdinfo;	
++	u8	wfd_ie[ 128 ] = { 0x00 };
++	u32	wfd_ielen = 0;
++
++
++	pwdinfo = &padapter->wdinfo;
++	if ( rtw_get_wfd_ie( ( u8* ) pIE, pIE->Length, wfd_ie, &wfd_ielen ) )
++	{
++		u8	attr_content[ 10 ] = { 0x00 };
++		u32	attr_contentlen = 0;
++			
++		printk( "[%s] Found WFD IE\n", __FUNCTION__ );
++		rtw_get_wfd_attr_content( wfd_ie, wfd_ielen, WFD_ATTR_DEVICE_INFO, attr_content, &attr_contentlen);
++		if ( attr_contentlen )
++		{
++			pwdinfo->wfd_info->peer_rtsp_ctrlport = RTW_GET_BE16( attr_content + 2 );
++			DBG_8192C( "[%s] Peer PORT NUM = %d\n", __FUNCTION__, pwdinfo->wfd_info->peer_rtsp_ctrlport );
++			return( _TRUE );
++		}		
++	}
++	else
++	{
++		printk( "[%s] NO WFD IE\n", __FUNCTION__ );
++
++	}
++	return( _FAIL );
++}
++#endif
++
++int WMM_param_handler(_adapter *padapter, PNDIS_802_11_VARIABLE_IEs	pIE)
++{
++	//struct registry_priv	*pregpriv = &padapter->registrypriv;
++	struct mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);	
++	
++	if(pmlmepriv->qospriv.qos_option==0)
++	{
++		pmlmeinfo->WMM_enable = 0;
++		return _FAIL;
++	}	
++
++	pmlmeinfo->WMM_enable = 1;
++	_rtw_memcpy(&(pmlmeinfo->WMM_param), (pIE->data + 6), sizeof(struct WMM_para_element));
++	return _TRUE;
++
++	/*if (pregpriv->wifi_spec == 1)
++	{
++		if (pmlmeinfo->WMM_enable == 1)
++		{
++			//todo: compare the parameter set count & decide wheher to update or not
++			return _FAIL;
++		}
++		else
++		{
++			pmlmeinfo->WMM_enable = 1;
++			_rtw_rtw_memcpy(&(pmlmeinfo->WMM_param), (pIE->data + 6), sizeof(struct WMM_para_element));
++			return _TRUE;
++		}
++	}
++	else
++	{
++		pmlmeinfo->WMM_enable = 0;
++		return _FAIL;
++	}*/
++	
++}
++
++void WMMOnAssocRsp(_adapter *padapter)
++{
++	u8	ACI, ACM, AIFS, ECWMin, ECWMax, aSifsTime;
++	u8	acm_mask;
++	u16	TXOP;
++	u32	acParm, i;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	if (pmlmeinfo->WMM_enable == 0)
++	{
++		padapter->mlmepriv.acm_mask = 0;
++		return;
++	}
++
++	acm_mask = 0;
++
++	if( pmlmeext->cur_wireless_mode == WIRELESS_11B)
++		aSifsTime = 10;
++	else
++		aSifsTime = 16;
++
++	for (i = 0; i < 4; i++)  
++	{
++		ACI = (pmlmeinfo->WMM_param.ac_param[i].ACI_AIFSN >> 5) & 0x03;
++		ACM = (pmlmeinfo->WMM_param.ac_param[i].ACI_AIFSN >> 4) & 0x01;
++
++		//AIFS = AIFSN * slot time + SIFS - r2t phy delay
++		AIFS = (pmlmeinfo->WMM_param.ac_param[i].ACI_AIFSN & 0x0f) * pmlmeinfo->slotTime + aSifsTime;
++
++		ECWMin = (pmlmeinfo->WMM_param.ac_param[i].CW & 0x0f);
++		ECWMax = (pmlmeinfo->WMM_param.ac_param[i].CW & 0xf0) >> 4;
++		TXOP = le16_to_cpu(pmlmeinfo->WMM_param.ac_param[i].TXOP_limit);
++
++		acParm = AIFS | (ECWMin << 8) | (ECWMax << 12) | (TXOP << 16);
++
++		switch (ACI)
++		{
++			case 0x0:
++				rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_BE, (u8 *)(&acParm));
++				acm_mask |= (ACM? BIT(1):0);
++				break;
++
++			case 0x1:
++				rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_BK, (u8 *)(&acParm));
++				//acm_mask |= (ACM? BIT(0):0);
++				break;
++
++			case 0x2:
++				rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_VI, (u8 *)(&acParm));
++				acm_mask |= (ACM? BIT(2):0);
++				break;
++
++			case 0x3:
++				rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_VO, (u8 *)(&acParm));
++				acm_mask |= (ACM? BIT(3):0);
++				break;							
++		}
++
++		DBG_871X("WMM(%x): %x, %x\n", ACI, ACM, acParm);
++	}
++
++	if(padapter->registrypriv.acm_method == 1)
++		rtw_hal_set_hwreg(padapter, HW_VAR_ACM_CTRL, (u8 *)(&acm_mask));
++	else
++		padapter->mlmepriv.acm_mask = acm_mask;
++
++	return;	
++}
++
++static void bwmode_update_check(_adapter *padapter, PNDIS_802_11_VARIABLE_IEs pIE)
++{
++	unsigned char	 new_bwmode;
++	unsigned char  new_ch_offset;
++	struct HT_info_element	 *pHT_info;
++	struct mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct registry_priv *pregistrypriv = &padapter->registrypriv;
++	struct ht_priv			*phtpriv = &pmlmepriv->htpriv;
++	u8 cbw40_enable=0;
++
++	if(!pIE)
++		return;
++
++	if(phtpriv->ht_option == _FALSE)	return;
++
++	if(pIE->Length > sizeof(struct HT_info_element))
++		return;
++	
++	pHT_info = (struct HT_info_element *)pIE->data;
++
++	if (pmlmeext->cur_channel > 14) {
++		if (pregistrypriv->cbw40_enable & BIT(1))
++			cbw40_enable = 1;
++	} else {
++		if (pregistrypriv->cbw40_enable & BIT(0))
++			cbw40_enable = 1;
++	}
++	
++	if((pHT_info->infos[0] & BIT(2)) && cbw40_enable )
++	{
++		new_bwmode = HT_CHANNEL_WIDTH_40;
++
++		switch (pHT_info->infos[0] & 0x3)
++		{
++			case 1:
++				new_ch_offset = HAL_PRIME_CHNL_OFFSET_LOWER;
++				break;
++			
++			case 3:
++				new_ch_offset = HAL_PRIME_CHNL_OFFSET_UPPER;
++				break;
++				
++			default:
++				new_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++				break;
++		}
++	}
++	else
++	{
++		new_bwmode = HT_CHANNEL_WIDTH_20;
++		new_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++	}	
++
++	
++	if((new_bwmode!= pmlmeext->cur_bwmode) || (new_ch_offset!=pmlmeext->cur_ch_offset))
++	{
++		pmlmeinfo->bwmode_updated = _TRUE;
++		
++		pmlmeext->cur_bwmode = new_bwmode;
++		pmlmeext->cur_ch_offset = new_ch_offset;
++
++		//update HT info also
++		HT_info_handler(padapter, pIE);
++	}
++	else
++	{
++		pmlmeinfo->bwmode_updated = _FALSE;
++	}
++		
++
++	if(_TRUE == pmlmeinfo->bwmode_updated)
++	{
++		struct sta_info *psta;
++		WLAN_BSSID_EX 	*cur_network = &(pmlmeinfo->network);
++		struct sta_priv	*pstapriv = &padapter->stapriv;
++	
++		//set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode);
++
++		
++		//update ap's stainfo
++		psta = rtw_get_stainfo(pstapriv, cur_network->MacAddress);
++		if(psta)
++		{
++			struct ht_priv	*phtpriv_sta = &psta->htpriv;
++			
++			if(phtpriv_sta->ht_option)
++			{				
++				// bwmode				
++				phtpriv_sta->bwmode = pmlmeext->cur_bwmode;
++				phtpriv_sta->ch_offset = pmlmeext->cur_ch_offset;		
++			}
++			else
++			{
++				phtpriv_sta->bwmode = HT_CHANNEL_WIDTH_20;
++				phtpriv_sta->ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++			}
++			
++		}
++
++		//pmlmeinfo->bwmode_updated = _FALSE;//bwmode_updated done, reset it!
++		
++	}	
++
++}
++
++void HT_caps_handler(_adapter *padapter, PNDIS_802_11_VARIABLE_IEs pIE)
++{
++	unsigned int	i;
++	u8	rf_type;
++	u8	max_AMPDU_len, min_MPDU_spacing;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct mlme_priv 		*pmlmepriv = &padapter->mlmepriv;	
++	struct ht_priv			*phtpriv = &pmlmepriv->htpriv;
++	struct registry_priv 	*pregistrypriv = &padapter->registrypriv;
++	
++	if(pIE==NULL) return;
++	
++	if(phtpriv->ht_option == _FALSE)	return;
++
++	pmlmeinfo->HT_caps_enable = 1;
++	
++	for (i = 0; i < (pIE->Length); i++)
++	{
++		if (i != 2)
++		{
++			//	Commented by Albert 2010/07/12
++			//	Got the endian issue here.
++			pmlmeinfo->HT_caps.u.HT_cap[i] &= (pIE->data[i]);
++		}
++		else
++		{
++			//modify from  fw by Thomas 2010/11/17
++			if ((pmlmeinfo->HT_caps.u.HT_cap_element.AMPDU_para & 0x3) > (pIE->data[i] & 0x3))
++			{
++				max_AMPDU_len = (pIE->data[i] & 0x3);
++			}
++			else
++			{
++				max_AMPDU_len = (pmlmeinfo->HT_caps.u.HT_cap_element.AMPDU_para & 0x3);
++			}
++			
++			if ((pmlmeinfo->HT_caps.u.HT_cap_element.AMPDU_para & 0x1c) > (pIE->data[i] & 0x1c))
++			{
++				min_MPDU_spacing = (pmlmeinfo->HT_caps.u.HT_cap_element.AMPDU_para & 0x1c);
++			}
++			else
++			{
++				min_MPDU_spacing = (pIE->data[i] & 0x1c);
++			}
++
++			pmlmeinfo->HT_caps.u.HT_cap_element.AMPDU_para = max_AMPDU_len | min_MPDU_spacing;
++		}
++	}
++
++	//	Commented by Albert 2010/07/12
++	//	Have to handle the endian issue after copying.
++	//	HT_ext_caps didn't be used yet.	
++	pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info = le16_to_cpu( pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info );
++	pmlmeinfo->HT_caps.u.HT_cap_element.HT_ext_caps = le16_to_cpu( pmlmeinfo->HT_caps.u.HT_cap_element.HT_ext_caps );
++
++	rtw_hal_get_hwreg(padapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type));
++
++	//update the MCS rates
++	for (i = 0; i < 16; i++)
++	{
++		if((rf_type == RF_1T1R) || (rf_type == RF_1T2R))
++		{
++			pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate[i] &= MCS_rate_1R[i];
++		}
++		else
++		{
++			#ifdef CONFIG_DISABLE_MCS13TO15
++			if(pmlmeext->cur_bwmode == HT_CHANNEL_WIDTH_40 && (pregistrypriv->wifi_spec!=1))
++				pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate[i] &= MCS_rate_2R_MCS13TO15_OFF[i];
++			else
++			pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate[i] &= MCS_rate_2R[i];
++			#else
++			pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate[i] &= MCS_rate_2R[i];
++			#endif //CONFIG_DISABLE_MCS13TO15
++		}
++	        #ifdef RTL8192C_RECONFIG_TO_1T1R
++		{
++			pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate[i] &= MCS_rate_1R[i];
++		}
++		#endif
++
++		if(pregistrypriv->special_rf_path)
++			pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate[i] &= MCS_rate_1R[i];
++
++	}
++	
++	return;
++}
++
++void HT_info_handler(_adapter *padapter, PNDIS_802_11_VARIABLE_IEs pIE)
++{
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct mlme_priv 		*pmlmepriv = &padapter->mlmepriv;	
++	struct ht_priv			*phtpriv = &pmlmepriv->htpriv;
++
++	if(pIE==NULL) return;
++
++	if(phtpriv->ht_option == _FALSE)	return;
++
++
++	if(pIE->Length > sizeof(struct HT_info_element))
++		return;
++	
++	pmlmeinfo->HT_info_enable = 1;
++	_rtw_memcpy(&(pmlmeinfo->HT_info), pIE->data, pIE->Length);
++	
++	return;
++}
++
++void HTOnAssocRsp(_adapter *padapter)
++{
++	unsigned char		max_AMPDU_len;
++	unsigned char		min_MPDU_spacing;
++	//struct registry_priv	 *pregpriv = &padapter->registrypriv;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	
++	DBG_871X("%s\n", __FUNCTION__);
++
++	if ((pmlmeinfo->HT_info_enable) && (pmlmeinfo->HT_caps_enable))
++	{
++		pmlmeinfo->HT_enable = 1;
++	}
++	else
++	{
++		pmlmeinfo->HT_enable = 0;
++		//set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode);
++		return;
++	}
++	
++	//handle A-MPDU parameter field
++	/* 	
++		AMPDU_para [1:0]:Max AMPDU Len => 0:8k , 1:16k, 2:32k, 3:64k
++		AMPDU_para [4:2]:Min MPDU Start Spacing	
++	*/
++	max_AMPDU_len = pmlmeinfo->HT_caps.u.HT_cap_element.AMPDU_para & 0x03;	
++	
++	min_MPDU_spacing = (pmlmeinfo->HT_caps.u.HT_cap_element.AMPDU_para & 0x1c) >> 2;	
++
++	rtw_hal_set_hwreg(padapter, HW_VAR_AMPDU_MIN_SPACE, (u8 *)(&min_MPDU_spacing));
++
++	rtw_hal_set_hwreg(padapter, HW_VAR_AMPDU_FACTOR, (u8 *)(&max_AMPDU_len));
++
++#if 0 //move to rtw_update_ht_cap()
++	if ((pregpriv->cbw40_enable) &&
++		(pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info & BIT(1)) && 
++		(pmlmeinfo->HT_info.infos[0] & BIT(2)))
++	{
++		//switch to the 40M Hz mode accoring to the AP
++		pmlmeext->cur_bwmode = HT_CHANNEL_WIDTH_40;
++		switch ((pmlmeinfo->HT_info.infos[0] & 0x3))
++		{
++			case HT_EXTCHNL_OFFSET_UPPER:
++				pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_LOWER;
++				break;
++			
++			case HT_EXTCHNL_OFFSET_LOWER:
++				pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_UPPER;
++				break;
++				
++			default:
++				pmlmeext->cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++				break;
++		}
++		
++		//SelectChannel(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset);
++	}
++#endif
++
++	//set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode);
++
++#if 0 //move to rtw_update_ht_cap()
++	//
++	// Config SM Power Save setting
++	//
++	pmlmeinfo->SM_PS = (pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info & 0x0C) >> 2;
++	if(pmlmeinfo->SM_PS == WLAN_HT_CAP_SM_PS_STATIC)
++	{
++		/*u8 i;
++		//update the MCS rates
++		for (i = 0; i < 16; i++)
++		{
++			pmlmeinfo->HT_caps.HT_cap_element.MCS_rate[i] &= MCS_rate_1R[i];
++		}*/
++		DBG_871X("%s(): WLAN_HT_CAP_SM_PS_STATIC\n",__FUNCTION__);
++	}
++
++	//
++	// Config current HT Protection mode.
++	//
++	pmlmeinfo->HT_protection = pmlmeinfo->HT_info.infos[1] & 0x3;
++#endif
++	
++}
++
++void ERP_IE_handler(_adapter *padapter, PNDIS_802_11_VARIABLE_IEs pIE)
++{
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	if(pIE->Length>1)
++		return;
++	
++	pmlmeinfo->ERP_enable = 1;
++	_rtw_memcpy(&(pmlmeinfo->ERP_IE), pIE->data, pIE->Length);
++}
++
++void VCS_update(_adapter *padapter, struct sta_info *psta)
++{
++	struct registry_priv	 *pregpriv = &padapter->registrypriv;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	switch (pregpriv->vrtl_carrier_sense)/* 0:off 1:on 2:auto */
++	{
++		case 0: //off
++			psta->rtsen = 0;
++			psta->cts2self = 0;
++			break;
++			
++		case 1: //on
++			if (pregpriv->vcs_type == 1) /* 1:RTS/CTS 2:CTS to self */
++			{
++				psta->rtsen = 1;
++				psta->cts2self = 0;
++			}
++			else
++			{
++				psta->rtsen = 0;
++				psta->cts2self = 1;
++			}
++			break;
++			
++		case 2: //auto
++		default:
++			if ((pmlmeinfo->ERP_enable) && (pmlmeinfo->ERP_IE & BIT(1)))
++			{
++				if (pregpriv->vcs_type == 1)
++				{
++					psta->rtsen = 1;
++					psta->cts2self = 0;
++				}
++				else
++				{
++					psta->rtsen = 0;
++					psta->cts2self = 1;
++				}
++			}
++			else
++			{
++				psta->rtsen = 0;
++				psta->cts2self = 0;
++			}	
++			break;
++	}
++}
++
++#ifdef CONFIG_TDLS
++int check_ap_tdls_prohibited(u8 *pframe, u8 pkt_len)
++{
++	u8 tdls_prohibited_bit = 0x40; //bit(38); TDLS_prohibited
++
++	if(pkt_len < 5)
++	{
++		return _FALSE;
++	}
++
++	pframe += 4;
++	if( (*pframe) & tdls_prohibited_bit )
++		return _TRUE;
++
++	return _FALSE;
++}
++#endif //CONFIG_TDLS
++
++void update_beacon_info(_adapter *padapter, u8 *pframe, uint pkt_len, struct sta_info *psta)
++{
++	unsigned int i;
++	unsigned int len;
++	PNDIS_802_11_VARIABLE_IEs	pIE;
++		
++#ifdef CONFIG_TDLS
++	struct tdls_info *ptdlsinfo = &padapter->tdlsinfo;
++	u8 tdls_prohibited[] = { 0x00, 0x00, 0x00, 0x00, 0x10 }; //bit(38): TDLS_prohibited
++#endif //CONFIG_TDLS
++
++	len = pkt_len - (_BEACON_IE_OFFSET_ + WLAN_HDR_A3_LEN);
++
++	for (i = 0; i < len;)
++	{
++		pIE = (PNDIS_802_11_VARIABLE_IEs)(pframe + (_BEACON_IE_OFFSET_ + WLAN_HDR_A3_LEN) + i);
++		
++		switch (pIE->ElementID)
++		{
++#if 0			
++			case _VENDOR_SPECIFIC_IE_:		
++				//todo: to update WMM paramter set while receiving beacon			
++				if (_rtw_memcmp(pIE->data, WMM_PARA_OUI, 6))	//WMM
++				{
++					(WMM_param_handler(padapter, pIE))? WMMOnAssocRsp(padapter): 0;
++				}				
++				break;
++#endif
++
++			case _HT_EXTRA_INFO_IE_:	//HT info				
++				//HT_info_handler(padapter, pIE);
++				bwmode_update_check(padapter, pIE);
++				break;
++
++			case _ERPINFO_IE_:
++				ERP_IE_handler(padapter, pIE);
++				VCS_update(padapter, psta);
++				break;
++				
++#ifdef CONFIG_TDLS
++			case _EXT_CAP_IE_:
++				if( check_ap_tdls_prohibited(pIE->data, pIE->Length) == _TRUE )
++					ptdlsinfo->ap_prohibited = _TRUE;
++				break;
++#endif //CONFIG_TDLS
++			default:
++				break;
++		}
++		
++		i += (pIE->Length + 2);
++	}
++}
++
++#ifdef CONFIG_DFS
++void process_csa_ie(_adapter *padapter, u8 *pframe, uint pkt_len)
++{
++	unsigned int i;
++	unsigned int len;
++	PNDIS_802_11_VARIABLE_IEs	pIE;
++	u8 new_ch_no = 0; 
++		
++	len = pkt_len - (_BEACON_IE_OFFSET_ + WLAN_HDR_A3_LEN);
++
++	for (i = 0; i < len;)
++	{
++		pIE = (PNDIS_802_11_VARIABLE_IEs)(pframe + (_BEACON_IE_OFFSET_ + WLAN_HDR_A3_LEN) + i);
++		
++		switch (pIE->ElementID)
++		{
++			case _CH_SWTICH_ANNOUNCE_:
++				_rtw_memcpy(&new_ch_no, pIE->data+1, 1);
++				rtw_set_csa_cmd(padapter, new_ch_no);
++				break;
++
++			default:
++				break;
++		}
++		
++		i += (pIE->Length + 2);
++	}
++}
++#endif //CONFIG_DFS
++
++unsigned int is_ap_in_tkip(_adapter *padapter)
++{
++	u32 i;
++	PNDIS_802_11_VARIABLE_IEs	pIE;
++	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	WLAN_BSSID_EX 		*cur_network = &(pmlmeinfo->network);
++
++	if (rtw_get_capability((WLAN_BSSID_EX *)cur_network) & WLAN_CAPABILITY_PRIVACY)
++	{
++		for (i = sizeof(NDIS_802_11_FIXED_IEs); i < pmlmeinfo->network.IELength;)
++		{
++			pIE = (PNDIS_802_11_VARIABLE_IEs)(pmlmeinfo->network.IEs + i);
++		
++			switch (pIE->ElementID)
++			{
++				case _VENDOR_SPECIFIC_IE_:
++					if ((_rtw_memcmp(pIE->data, RTW_WPA_OUI, 4)) && (_rtw_memcmp((pIE->data + 12), WPA_TKIP_CIPHER, 4))) 
++					{
++						return _TRUE;
++					}
++					break;
++				
++				case _RSN_IE_2_:
++					if (_rtw_memcmp((pIE->data + 8), RSN_TKIP_CIPHER, 4)) 
++					{
++						return _TRUE;
++					}
++					
++				default:
++					break;
++			}
++		
++			i += (pIE->Length + 2);
++		}
++		
++		return _FALSE;
++	}
++	else
++	{
++		return _FALSE;
++	}
++	
++}
++
++int wifirate2_ratetbl_inx(unsigned char rate);
++int wifirate2_ratetbl_inx(unsigned char rate)
++{
++	int	inx = 0;
++	rate = rate & 0x7f;
++
++	switch (rate) 
++	{
++		case 54*2:
++			inx = 11;
++			break;
++
++		case 48*2:
++			inx = 10;
++			break;
++
++		case 36*2:
++			inx = 9;
++			break;
++
++		case 24*2:
++			inx = 8;
++			break;
++			
++		case 18*2:
++			inx = 7;
++			break;
++
++		case 12*2:
++			inx = 6;
++			break;
++
++		case 9*2:
++			inx = 5;
++			break;
++			
++		case 6*2:
++			inx = 4;
++			break;
++
++		case 11*2:
++			inx = 3;
++			break;
++		case 11:
++			inx = 2;
++			break;
++
++		case 2*2:
++			inx = 1;
++			break;
++		
++		case 1*2:
++			inx = 0;
++			break;
++
++	}
++	return inx;	
++}
++
++unsigned int update_basic_rate(unsigned char *ptn, unsigned int ptn_sz)
++{
++	unsigned int i, num_of_rate;
++	unsigned int mask = 0;
++	
++	num_of_rate = (ptn_sz > NumRates)? NumRates: ptn_sz;
++		
++	for (i = 0; i < num_of_rate; i++)
++	{
++		if ((*(ptn + i)) & 0x80)
++		{
++			mask |= 0x1 << wifirate2_ratetbl_inx(*(ptn + i));
++		}
++	}
++	return mask;
++}
++
++unsigned int update_supported_rate(unsigned char *ptn, unsigned int ptn_sz)
++{
++	unsigned int i, num_of_rate;
++	unsigned int mask = 0;
++	
++	num_of_rate = (ptn_sz > NumRates)? NumRates: ptn_sz;
++		
++	for (i = 0; i < num_of_rate; i++)
++	{
++		mask |= 0x1 << wifirate2_ratetbl_inx(*(ptn + i));
++	}
++
++	return mask;
++}
++
++unsigned int update_MSC_rate(struct HT_caps_element *pHT_caps)
++{
++	unsigned int mask = 0;
++	
++	mask = ((pHT_caps->u.HT_cap_element.MCS_rate[0] << 12) | (pHT_caps->u.HT_cap_element.MCS_rate[1] << 20));
++						
++	return mask;
++}
++
++int support_short_GI(_adapter *padapter, struct HT_caps_element *pHT_caps)
++{
++	unsigned char					bit_offset;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	
++	if (!(pmlmeinfo->HT_enable))
++		return _FAIL;
++	
++	if ((pmlmeinfo->assoc_AP_vendor == ralinkAP))
++		return _FAIL;
++		
++	bit_offset = (pmlmeext->cur_bwmode & HT_CHANNEL_WIDTH_40)? 6: 5;
++	
++	if (pHT_caps->u.HT_cap_element.HT_caps_info & (0x1 << bit_offset))
++	{
++		return _SUCCESS;
++	}
++	else
++	{
++		return _FAIL;
++	}		
++}
++
++unsigned char get_highest_rate_idx(u32 mask)
++{
++	int i;
++	unsigned char rate_idx=0;
++
++	for(i=27; i>=0; i--)
++	{
++		if(mask & BIT(i))
++		{
++			rate_idx = i;
++			break;
++		}
++	}
++
++	return rate_idx;
++}
++
++unsigned char get_highest_mcs_rate(struct HT_caps_element *pHT_caps);
++unsigned char get_highest_mcs_rate(struct HT_caps_element *pHT_caps)
++{
++	int i, mcs_rate;
++	
++	mcs_rate = (pHT_caps->u.HT_cap_element.MCS_rate[0] | (pHT_caps->u.HT_cap_element.MCS_rate[1] << 8));
++	
++	for (i = 15; i >= 0; i--)
++	{
++		if (mcs_rate & (0x1 << i))
++		{
++			break;
++		}
++	}
++	
++	return i;
++}
++
++void Update_RA_Entry(_adapter *padapter, u32 mac_id)
++{
++	rtw_hal_update_ra_mask(padapter, mac_id);
++}
++
++void enable_rate_adaptive(_adapter *padapter, u32 mac_id);
++void enable_rate_adaptive(_adapter *padapter, u32 mac_id)
++{
++	Update_RA_Entry(padapter, mac_id);
++}
++
++void set_sta_rate(_adapter *padapter, struct sta_info *psta)
++{
++	//rate adaptive	
++	enable_rate_adaptive(padapter, psta->mac_id);
++}
++
++// Update RRSR and Rate for USERATE
++void update_tx_basic_rate(_adapter *padapter, u8 wirelessmode)
++{
++	NDIS_802_11_RATES_EX	supported_rates;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++#ifdef CONFIG_P2P
++	struct wifidirect_info*	pwdinfo = &padapter->wdinfo;
++
++	//	Added by Albert 2011/03/22
++	//	In the P2P mode, the driver should not support the b mode.
++	//	So, the Tx packet shouldn't use the CCK rate
++	if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++		return;
++#endif //CONFIG_P2P
++#ifdef CONFIG_INTEL_WIDI
++	if (padapter->mlmepriv.widi_state != INTEL_WIDI_STATE_NONE)
++		return;
++#endif //CONFIG_INTEL_WIDI
++
++	_rtw_memset(supported_rates, 0, NDIS_802_11_LENGTH_RATES_EX);
++
++	//clear B mod if current channel is in 5G band, avoid tx cck rate in 5G band.
++	if(pmlmeext->cur_channel > 14)
++		wirelessmode &= ~(WIRELESS_11B);
++
++	if ((wirelessmode & WIRELESS_11B) && (wirelessmode == WIRELESS_11B)) {
++		_rtw_memcpy(supported_rates, rtw_basic_rate_cck, 4);
++	} else if (wirelessmode & WIRELESS_11B) {
++		_rtw_memcpy(supported_rates, rtw_basic_rate_mix, 7);
++	} else {
++		_rtw_memcpy(supported_rates, rtw_basic_rate_ofdm, 3);
++	}
++
++	if (wirelessmode & WIRELESS_11B)
++		update_mgnt_tx_rate(padapter, IEEE80211_CCK_RATE_1MB);
++	else
++		update_mgnt_tx_rate(padapter, IEEE80211_OFDM_RATE_6MB);
++
++	rtw_hal_set_hwreg(padapter, HW_VAR_BASIC_RATE, supported_rates);
++}
++
++unsigned char check_assoc_AP(u8 *pframe, uint len)
++{
++	unsigned int	i;
++	PNDIS_802_11_VARIABLE_IEs	pIE;
++
++	for (i = sizeof(NDIS_802_11_FIXED_IEs); i < len;)
++	{
++		pIE = (PNDIS_802_11_VARIABLE_IEs)(pframe + i);
++		
++		switch (pIE->ElementID)
++		{
++			case _VENDOR_SPECIFIC_IE_:
++				if ((_rtw_memcmp(pIE->data, ARTHEROS_OUI1, 3)) || (_rtw_memcmp(pIE->data, ARTHEROS_OUI2, 3)))
++				{
++					DBG_871X("link to Artheros AP\n");
++					return atherosAP;
++				}
++				else if ((_rtw_memcmp(pIE->data, BROADCOM_OUI1, 3))
++							|| (_rtw_memcmp(pIE->data, BROADCOM_OUI2, 3))
++							|| (_rtw_memcmp(pIE->data, BROADCOM_OUI2, 3)))
++				{
++					DBG_871X("link to Broadcom AP\n");
++					return broadcomAP;
++				}
++				else if (_rtw_memcmp(pIE->data, MARVELL_OUI, 3))
++				{
++					DBG_871X("link to Marvell AP\n");
++					return marvellAP;
++				}
++				else if (_rtw_memcmp(pIE->data, RALINK_OUI, 3))
++				{
++					DBG_871X("link to Ralink AP\n");
++					return ralinkAP;
++				}
++				else if (_rtw_memcmp(pIE->data, CISCO_OUI, 3))
++				{
++					DBG_871X("link to Cisco AP\n");
++					return ciscoAP;
++				}
++				else if (_rtw_memcmp(pIE->data, REALTEK_OUI, 3))
++				{
++					DBG_871X("link to Realtek 96B\n");
++					return realtekAP;
++				}
++				else if (_rtw_memcmp(pIE->data, AIRGOCAP_OUI,3))
++				{
++					DBG_871X("link to Airgo Cap\n");
++					return airgocapAP;
++				}
++				else
++				{
++					break;
++				}
++						
++			default:
++				break;
++		}
++				
++		i += (pIE->Length + 2);
++	}
++	
++	DBG_871X("link to new AP\n");
++	return unknownAP;
++}
++
++void update_IOT_info(_adapter *padapter)
++{
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	
++	switch (pmlmeinfo->assoc_AP_vendor)
++	{
++		case marvellAP:
++			pmlmeinfo->turboMode_cts2self = 1;
++			pmlmeinfo->turboMode_rtsen = 0;
++			break;
++		
++		case ralinkAP:
++			pmlmeinfo->turboMode_cts2self = 0;
++			pmlmeinfo->turboMode_rtsen = 1;
++			//disable high power			
++			Switch_DM_Func(padapter, (~DYNAMIC_FUNC_HP), _FALSE);
++			break;
++		case realtekAP:
++			//rtw_write16(padapter, 0x4cc, 0xffff);
++			//rtw_write16(padapter, 0x546, 0x01c0);
++			//disable high power			
++			Switch_DM_Func(padapter, (~DYNAMIC_FUNC_HP), _FALSE);
++			break;
++		default:
++			pmlmeinfo->turboMode_cts2self = 0;
++			pmlmeinfo->turboMode_rtsen = 1;
++			break;	
++	}
++	
++}
++
++void update_capinfo(PADAPTER Adapter, u16 updateCap)
++{
++	struct mlme_ext_priv	*pmlmeext = &Adapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	BOOLEAN		ShortPreamble;
++
++	// Check preamble mode, 2005.01.06, by rcnjko.
++	// Mark to update preamble value forever, 2008.03.18 by lanhsin
++	//if( pMgntInfo->RegPreambleMode == PREAMBLE_AUTO )
++	{
++			
++		if(updateCap & cShortPreamble)
++		{ // Short Preamble
++			if(pmlmeinfo->preamble_mode != PREAMBLE_SHORT) // PREAMBLE_LONG or PREAMBLE_AUTO
++			{
++				ShortPreamble = _TRUE;
++				pmlmeinfo->preamble_mode = PREAMBLE_SHORT;
++				rtw_hal_set_hwreg( Adapter, HW_VAR_ACK_PREAMBLE, (u8 *)&ShortPreamble );
++			}
++		}
++		else
++		{ // Long Preamble
++			if(pmlmeinfo->preamble_mode != PREAMBLE_LONG)  // PREAMBLE_SHORT or PREAMBLE_AUTO
++			{
++				ShortPreamble = _FALSE;
++				pmlmeinfo->preamble_mode = PREAMBLE_LONG;
++				rtw_hal_set_hwreg( Adapter, HW_VAR_ACK_PREAMBLE, (u8 *)&ShortPreamble );
++			}
++		}
++	}
++
++	if ( updateCap & cIBSS ) {
++		//Filen: See 802.11-2007 p.91
++		pmlmeinfo->slotTime = NON_SHORT_SLOT_TIME;
++	}
++	else
++	{
++		//Filen: See 802.11-2007 p.90
++		if( pmlmeext->cur_wireless_mode & (WIRELESS_11G | WIRELESS_11_24N))
++		{
++			if( (updateCap & cShortSlotTime) /* && (!(pMgntInfo->pHTInfo->RT2RT_HT_Mode & RT_HT_CAP_USE_LONG_PREAMBLE)) */)
++			{ // Short Slot Time
++				if(pmlmeinfo->slotTime != SHORT_SLOT_TIME)
++				{
++					pmlmeinfo->slotTime = SHORT_SLOT_TIME;
++				}
++			}
++			else
++			{ // Long Slot Time
++				if(pmlmeinfo->slotTime != NON_SHORT_SLOT_TIME)
++				{
++					pmlmeinfo->slotTime = NON_SHORT_SLOT_TIME;
++				}
++			}
++		}
++		else if( pmlmeext->cur_wireless_mode & (WIRELESS_11A | WIRELESS_11_5N))
++		{
++			pmlmeinfo->slotTime = SHORT_SLOT_TIME;
++		}
++		else
++		{
++			//B Mode
++			pmlmeinfo->slotTime = NON_SHORT_SLOT_TIME;
++		}
++ 	}
++ 
++	rtw_hal_set_hwreg( Adapter, HW_VAR_SLOT_TIME, &pmlmeinfo->slotTime );
++
++}
++
++void update_wireless_mode(_adapter *padapter)
++{
++	u8	init_rate=0;
++	int	ratelen, network_type = 0;
++	u32	SIFS_Timer, mask;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	WLAN_BSSID_EX 		*cur_network = &(pmlmeinfo->network);
++	unsigned char			*rate = cur_network->SupportedRates;
++#ifdef CONFIG_CONCURRENT_MODE
++	_adapter *pbuddy_adapter = padapter->pbuddy_adapter;
++#endif //CONFIG_CONCURRENT_MODE
++
++	ratelen = rtw_get_rateset_len(cur_network->SupportedRates);
++
++	if ((pmlmeinfo->HT_info_enable) && (pmlmeinfo->HT_caps_enable))
++	{
++		pmlmeinfo->HT_enable = 1;
++	}
++
++	if(pmlmeext->cur_channel > 14)
++	{
++		if (pmlmeinfo->HT_enable)
++		{
++			network_type = WIRELESS_11_5N;
++		}
++
++		network_type |= WIRELESS_11A;
++	}
++	else
++	{
++		if (pmlmeinfo->HT_enable)
++		{
++			network_type = WIRELESS_11_24N;
++		}
++	
++		if ((cckratesonly_included(rate, ratelen)) == _TRUE)
++		{
++			network_type |= WIRELESS_11B;
++		}
++		else if((cckrates_included(rate, ratelen)) == _TRUE)
++		{
++			network_type |= WIRELESS_11BG;
++		}
++		else
++		{
++			network_type |= WIRELESS_11G;
++		}
++	}
++
++	pmlmeext->cur_wireless_mode = network_type & padapter->registrypriv.wireless_mode;
++
++	//For STA mode, driver need to modify initial data rate, or MAC will use wrong tx rate.
++	//Modified by Thomas 2012-12-3
++	mask = update_supported_rate(cur_network->SupportedRates, ratelen);
++	init_rate = get_highest_rate_idx(mask)&0x3f;
++	rtw_hal_set_hwreg( padapter, HW_VAR_INIT_DATA_RATE,  (u8 *)&init_rate);
++	
++/*
++	if((pmlmeext->cur_wireless_mode==WIRELESS_11G) ||
++		(pmlmeext->cur_wireless_mode==WIRELESS_11BG))//WIRELESS_MODE_G)
++		SIFS_Timer = 0x0a0a;//CCK
++	else
++		SIFS_Timer = 0x0e0e;//pHalData->SifsTime; //OFDM
++*/
++	
++	SIFS_Timer = 0x0a0a0808; //0x0808 -> for CCK, 0x0a0a -> for OFDM
++                             //change this value if having IOT issues.
++		
++	rtw_hal_set_hwreg( padapter, HW_VAR_RESP_SIFS,  (u8 *)&SIFS_Timer);
++
++	if (pmlmeext->cur_wireless_mode & WIRELESS_11B)
++		update_mgnt_tx_rate(padapter, IEEE80211_CCK_RATE_1MB);
++	else
++	{
++		update_mgnt_tx_rate(padapter, IEEE80211_OFDM_RATE_6MB);
++#ifdef CONFIG_CONCURRENT_MODE
++		if(pbuddy_adapter && (pmlmeext->cur_wireless_mode & WIRELESS_11A))
++			update_mgnt_tx_rate(pbuddy_adapter, IEEE80211_OFDM_RATE_6MB);
++#endif //CONFIG_CONCURRENT_MODE
++	}
++}
++
++void fire_write_MAC_cmd(_adapter *padapter, unsigned int addr, unsigned int value);
++void fire_write_MAC_cmd(_adapter *padapter, unsigned int addr, unsigned int value)
++{
++#if 0
++	struct cmd_obj					*ph2c;
++	struct reg_rw_parm			*pwriteMacPara;
++	struct cmd_priv					*pcmdpriv = &(padapter->cmdpriv);
++
++	if ((ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj))) == NULL)
++	{
++		return;
++	}	
++
++	if ((pwriteMacPara = (struct reg_rw_parm*)rtw_malloc(sizeof(struct reg_rw_parm))) == NULL) 
++	{		
++		rtw_mfree((unsigned char *)ph2c, sizeof(struct cmd_obj));
++		return;
++	}
++	
++	pwriteMacPara->rw = 1;
++	pwriteMacPara->addr = addr;
++	pwriteMacPara->value = value;
++	
++	init_h2fwcmd_w_parm_no_rsp(ph2c, pwriteMacPara, GEN_CMD_CODE(_Write_MACREG));
++	rtw_enqueue_cmd(pcmdpriv, ph2c);
++#endif	
++}
++
++void update_bmc_sta_support_rate(_adapter *padapter, u32 mac_id)
++{
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	if(pmlmeext->cur_wireless_mode & WIRELESS_11B)
++	{
++		// Only B, B/G, and B/G/N AP could use CCK rate
++		_rtw_memcpy((pmlmeinfo->FW_sta_info[mac_id].SupportedRates), rtw_basic_rate_cck, 4);
++	}
++	else
++	{
++		_rtw_memcpy((pmlmeinfo->FW_sta_info[mac_id].SupportedRates), rtw_basic_rate_ofdm, 3);
++	}
++}
++
++int update_sta_support_rate(_adapter *padapter, u8* pvar_ie, uint var_ie_len, int cam_idx)
++{
++	unsigned int	ie_len;
++	PNDIS_802_11_VARIABLE_IEs	pIE;
++	int	supportRateNum = 0;
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	
++	pIE = (PNDIS_802_11_VARIABLE_IEs)rtw_get_ie(pvar_ie, _SUPPORTEDRATES_IE_, &ie_len, var_ie_len);
++	if (pIE == NULL)
++	{
++		return _FAIL;
++	}
++	
++	_rtw_memcpy(pmlmeinfo->FW_sta_info[cam_idx].SupportedRates, pIE->data, ie_len);
++	supportRateNum = ie_len;
++				
++	pIE = (PNDIS_802_11_VARIABLE_IEs)rtw_get_ie(pvar_ie, _EXT_SUPPORTEDRATES_IE_, &ie_len, var_ie_len);
++	if (pIE)
++	{
++		_rtw_memcpy((pmlmeinfo->FW_sta_info[cam_idx].SupportedRates + supportRateNum), pIE->data, ie_len);
++	}
++
++	return _SUCCESS;
++	
++}
++
++void process_addba_req(_adapter *padapter, u8 *paddba_req, u8 *addr)
++{
++	struct sta_info *psta;
++	u16 tid, start_seq, param;	
++	struct recv_reorder_ctrl *preorder_ctrl;
++	struct sta_priv *pstapriv = &padapter->stapriv;	
++	struct ADDBA_request	*preq = (struct ADDBA_request*)paddba_req;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	psta = rtw_get_stainfo(pstapriv, addr);
++
++	if(psta)
++	{
++		start_seq = le16_to_cpu(preq->BA_starting_seqctrl) >> 4;
++			
++		param = le16_to_cpu(preq->BA_para_set);
++		tid = (param>>2)&0x0f;
++		
++		preorder_ctrl = &psta->recvreorder_ctrl[tid];
++
++		#ifdef CONFIG_UPDATE_INDICATE_SEQ_WHILE_PROCESS_ADDBA_REQ
++		preorder_ctrl->indicate_seq = start_seq;
++		#ifdef DBG_RX_SEQ
++		DBG_871X("DBG_RX_SEQ %s:%d IndicateSeq: %d, start_seq: %d\n", __FUNCTION__, __LINE__,
++			preorder_ctrl->indicate_seq, start_seq);
++		#endif
++		#else
++		preorder_ctrl->indicate_seq = 0xffff;
++		#endif
++		
++		preorder_ctrl->enable =(pmlmeinfo->bAcceptAddbaReq == _TRUE)? _TRUE :_FALSE;
++	}
++
++}
++
++void update_TSF(struct mlme_ext_priv *pmlmeext, u8 *pframe, uint len)
++{	
++	u8* pIE;
++	u32 *pbuf;
++		
++	pIE = pframe + sizeof(struct rtw_ieee80211_hdr_3addr);
++	pbuf = (u32*)pIE;
++
++	pmlmeext->TSFValue = le32_to_cpu(*(pbuf+1));
++	
++	pmlmeext->TSFValue = pmlmeext->TSFValue << 32;
++
++	pmlmeext->TSFValue |= le32_to_cpu(*pbuf);
++}
++
++void correct_TSF(_adapter *padapter, struct mlme_ext_priv *pmlmeext)
++{
++	rtw_hal_set_hwreg(padapter, HW_VAR_CORRECT_TSF, 0);
++}
++
++void beacon_timing_control(_adapter *padapter)
++{
++	rtw_hal_bcn_related_reg_setting(padapter);
++}
++
++#if 0
++unsigned int setup_beacon_frame(_adapter *padapter, unsigned char *beacon_frame)
++{
++	unsigned short				ATIMWindow;
++	unsigned char					*pframe;
++	struct tx_desc 				*ptxdesc;
++	struct rtw_ieee80211_hdr 	*pwlanhdr;
++	unsigned short				*fctrl;
++	unsigned int					rate_len, len = 0;
++	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	WLAN_BSSID_EX 		*cur_network = &(pmlmeinfo->network);
++	u8	bc_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
++	
++	_rtw_memset(beacon_frame, 0, 256);
++	
++	pframe = beacon_frame + TXDESC_SIZE;
++	
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;	
++	
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++	
++	_rtw_memcpy(pwlanhdr->addr1, bc_addr, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr3, get_my_bssid(cur_network), ETH_ALEN);
++	
++	SetFrameSubType(pframe, WIFI_BEACON);
++	
++	pframe += sizeof(struct rtw_ieee80211_hdr_3addr);	
++	len = sizeof(struct rtw_ieee80211_hdr_3addr);
++
++	//timestamp will be inserted by hardware
++	pframe += 8;
++	len += 8;
++
++	// beacon interval: 2 bytes
++	_rtw_memcpy(pframe, (unsigned char *)(rtw_get_beacon_interval_from_ie(cur_network->IEs)), 2); 
++
++	pframe += 2;
++	len += 2;
++
++	// capability info: 2 bytes
++	_rtw_memcpy(pframe, (unsigned char *)(rtw_get_capability_from_ie(cur_network->IEs)), 2);
++
++	pframe += 2;
++	len += 2;
++
++	// SSID
++	pframe = rtw_set_ie(pframe, _SSID_IE_, cur_network->Ssid.SsidLength, cur_network->Ssid.Ssid, &len);
++
++	// supported rates...
++	rate_len = rtw_get_rateset_len(cur_network->SupportedRates);
++	pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_, ((rate_len > 8)? 8: rate_len), cur_network->SupportedRates, &len);
++
++	// DS parameter set
++	pframe = rtw_set_ie(pframe, _DSSET_IE_, 1, (unsigned char *)&(cur_network->Configuration.DSConfig), &len);
++
++	// IBSS Parameter Set...
++	//ATIMWindow = cur->Configuration.ATIMWindow;
++	ATIMWindow = 0;
++	pframe = rtw_set_ie(pframe, _IBSS_PARA_IE_, 2, (unsigned char *)(&ATIMWindow), &len);
++
++	//todo: ERP IE
++	
++	// EXTERNDED SUPPORTED RATE
++	if (rate_len > 8)
++	{
++		pframe = rtw_set_ie(pframe, _EXT_SUPPORTEDRATES_IE_, (rate_len - 8), (cur_network->SupportedRates + 8), &len);
++	}
++
++	if ((len + TXDESC_SIZE) > 256)
++	{
++		//DBG_871X("marc: beacon frame too large\n");
++		return 0;
++	}
++
++	//fill the tx descriptor
++	ptxdesc = (struct tx_desc *)beacon_frame;
++	
++	//offset 0	
++	ptxdesc->txdw0 |= cpu_to_le32(len & 0x0000ffff); 
++	ptxdesc->txdw0 |= cpu_to_le32(((TXDESC_SIZE + OFFSET_SZ) << OFFSET_SHT) & 0x00ff0000); //default = 32 bytes for TX Desc
++	
++	//offset 4	
++	ptxdesc->txdw1 |= cpu_to_le32((0x10 << QSEL_SHT) & 0x00001f00);
++	
++	//offset 8		
++	ptxdesc->txdw2 |= cpu_to_le32(BMC);
++	ptxdesc->txdw2 |= cpu_to_le32(BK);
++
++	//offset 16		
++	ptxdesc->txdw4 = 0x80000000;
++	
++	//offset 20
++	ptxdesc->txdw5 = 0x00000000; //1M	
++	
++	return (len + TXDESC_SIZE);
++}
++#endif
++
++static _adapter *pbuddy_padapter = NULL;
++
++int rtw_handle_dualmac(_adapter *adapter, bool init)
++{
++	int status = _SUCCESS;
++	struct dvobj_priv *dvobj = adapter_to_dvobj(adapter);
++
++	if (!IS_HARDWARE_TYPE_8192D(adapter))
++		goto exit;
++
++	if (init) {
++		rtw_hal_get_def_var(adapter, HAL_DEF_DUAL_MAC_MODE, &dvobj->DualMacMode);
++		if (dvobj->DualMacMode == _TRUE) {
++			// temply disable IPS For 92D-VC
++			adapter->registrypriv.ips_mode = IPS_NONE;
++		}
++		
++		/* For SMSP on 92DU-VC, driver do not probe another Interface. */
++		if ((dvobj->DualMacMode != _TRUE) && (dvobj->InterfaceNumber != 0)) {
++			DBG_871X("%s(): Do not init another Interface because SMSP\n",__FUNCTION__);
++			status = _FAIL;
++			goto exit;
++		}
++
++#ifndef CONFIG_CONCURRENT_MODE
++		if (dvobj->DualMacMode == _TRUE) {
++			if (pbuddy_padapter == NULL) {
++				pbuddy_padapter = adapter;
++				DBG_871X("%s(): pbuddy_padapter == NULL, Set pbuddy_padapter\n",__FUNCTION__);
++			} else {
++				adapter->pbuddy_adapter = pbuddy_padapter;
++				pbuddy_padapter->pbuddy_adapter = adapter;
++				// clear global value
++				pbuddy_padapter = NULL;
++				DBG_871X("%s(): pbuddy_padapter exist, Exchange Information\n",__FUNCTION__);
++			}
++		}
++
++#ifdef CONFIG_DUALMAC_CONCURRENT
++		if (dvobj->InterfaceNumber == 0) {
++			//set adapter_type/iface type
++			adapter->isprimary = _TRUE;
++			adapter->adapter_type = PRIMARY_ADAPTER;
++			adapter->iface_type = IFACE_PORT0;
++			DBG_871X("%s(): PRIMARY_ADAPTER\n",__FUNCTION__);
++		} else {
++			//set adapter_type/iface type
++			adapter->isprimary = _FALSE;
++			adapter->adapter_type = SECONDARY_ADAPTER;
++			adapter->iface_type = IFACE_PORT1;
++			DBG_871X("%s(): SECONDARY_ADAPTER\n",__FUNCTION__);
++		}
++#endif
++#endif
++	}else {
++		pbuddy_padapter = NULL;
++	}
++exit:
++	return status;
++}
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_xmit.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_xmit.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/core/rtw_xmit.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/core/rtw_xmit.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,4156 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _RTW_XMIT_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <rtw_byteorder.h>
++#include <wifi.h>
++#include <osdep_intf.h>
++#include <circ_buf.h>
++#include <ip.h>
++
++#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS)
++#error "Shall be Linux or Windows, but not both!\n"
++#endif
++
++#ifdef PLATFORM_WINDOWS
++#include <if_ether.h>
++#endif
++
++#ifdef CONFIG_USB_HCI
++#include <usb_ops.h>
++#endif
++
++
++static u8 P802_1H_OUI[P80211_OUI_LEN] = { 0x00, 0x00, 0xf8 };
++static u8 RFC1042_OUI[P80211_OUI_LEN] = { 0x00, 0x00, 0x00 };
++
++static void _init_txservq(struct tx_servq *ptxservq)
++{
++_func_enter_;
++	_rtw_init_listhead(&ptxservq->tx_pending);
++	_rtw_init_queue(&ptxservq->sta_pending);
++	ptxservq->qcnt = 0;
++_func_exit_;		
++}
++
++
++void	_rtw_init_sta_xmit_priv(struct sta_xmit_priv *psta_xmitpriv)
++{	
++	
++_func_enter_;
++
++	_rtw_memset((unsigned char *)psta_xmitpriv, 0, sizeof (struct sta_xmit_priv));
++
++	_rtw_spinlock_init(&psta_xmitpriv->lock);
++	
++	//for(i = 0 ; i < MAX_NUMBLKS; i++)
++	//	_init_txservq(&(psta_xmitpriv->blk_q[i]));
++
++	_init_txservq(&psta_xmitpriv->be_q);
++	_init_txservq(&psta_xmitpriv->bk_q);
++	_init_txservq(&psta_xmitpriv->vi_q);
++	_init_txservq(&psta_xmitpriv->vo_q);
++	_rtw_init_listhead(&psta_xmitpriv->legacy_dz);
++	_rtw_init_listhead(&psta_xmitpriv->apsd);
++	
++_func_exit_;	
++
++}
++
++s32	_rtw_init_xmit_priv(struct xmit_priv *pxmitpriv, _adapter *padapter)
++{
++	int i;
++	struct xmit_buf *pxmitbuf;
++	struct xmit_frame *pxframe;
++	sint	res=_SUCCESS;   
++
++_func_enter_;   	
++
++	// We don't need to memset padapter->XXX to zero, because adapter is allocated by rtw_zvmalloc().
++	//_rtw_memset((unsigned char *)pxmitpriv, 0, sizeof(struct xmit_priv));
++	
++	_rtw_spinlock_init(&pxmitpriv->lock);
++	_rtw_spinlock_init(&pxmitpriv->lock_sctx);
++	_rtw_init_sema(&pxmitpriv->xmit_sema, 0);
++	_rtw_init_sema(&pxmitpriv->terminate_xmitthread_sema, 0);
++
++	/* 
++	Please insert all the queue initializaiton using _rtw_init_queue below
++	*/
++
++	pxmitpriv->adapter = padapter;
++	
++	//for(i = 0 ; i < MAX_NUMBLKS; i++)
++	//	_rtw_init_queue(&pxmitpriv->blk_strms[i]);
++	
++	_rtw_init_queue(&pxmitpriv->be_pending);
++	_rtw_init_queue(&pxmitpriv->bk_pending);
++	_rtw_init_queue(&pxmitpriv->vi_pending);
++	_rtw_init_queue(&pxmitpriv->vo_pending);
++	_rtw_init_queue(&pxmitpriv->bm_pending);
++
++	//_rtw_init_queue(&pxmitpriv->legacy_dz_queue);
++	//_rtw_init_queue(&pxmitpriv->apsd_queue);
++
++	_rtw_init_queue(&pxmitpriv->free_xmit_queue);
++
++	/*	
++	Please allocate memory with the sz = (struct xmit_frame) * NR_XMITFRAME, 
++	and initialize free_xmit_frame below.
++	Please also apply  free_txobj to link_up all the xmit_frames...
++	*/
++
++	pxmitpriv->pallocated_frame_buf = rtw_zvmalloc(NR_XMITFRAME * sizeof(struct xmit_frame) + 4);
++	
++	if (pxmitpriv->pallocated_frame_buf  == NULL){
++		pxmitpriv->pxmit_frame_buf =NULL;
++		RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("alloc xmit_frame fail!\n"));	
++		res= _FAIL;
++		goto exit;
++	}
++	pxmitpriv->pxmit_frame_buf = (u8 *)N_BYTE_ALIGMENT((SIZE_PTR)(pxmitpriv->pallocated_frame_buf), 4);
++	//pxmitpriv->pxmit_frame_buf = pxmitpriv->pallocated_frame_buf + 4 -
++	//						((SIZE_PTR) (pxmitpriv->pallocated_frame_buf) &3);
++
++	pxframe = (struct xmit_frame*) pxmitpriv->pxmit_frame_buf;
++
++	for (i = 0; i < NR_XMITFRAME; i++)
++	{
++		_rtw_init_listhead(&(pxframe->list));
++
++		pxframe->padapter = padapter;
++		pxframe->frame_tag = NULL_FRAMETAG;
++
++		pxframe->pkt = NULL;		
++
++		pxframe->buf_addr = NULL;
++		pxframe->pxmitbuf = NULL;
++ 
++		rtw_list_insert_tail(&(pxframe->list), &(pxmitpriv->free_xmit_queue.queue));
++
++		pxframe++;
++	}
++
++	pxmitpriv->free_xmitframe_cnt = NR_XMITFRAME;
++
++	pxmitpriv->frag_len = MAX_FRAG_THRESHOLD;
++
++
++	//init xmit_buf
++	_rtw_init_queue(&pxmitpriv->free_xmitbuf_queue);
++	_rtw_init_queue(&pxmitpriv->pending_xmitbuf_queue);
++
++	pxmitpriv->pallocated_xmitbuf = rtw_zvmalloc(NR_XMITBUFF * sizeof(struct xmit_buf) + 4);
++	
++	if (pxmitpriv->pallocated_xmitbuf  == NULL){
++		RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("alloc xmit_buf fail!\n"));
++		res= _FAIL;
++		goto exit;
++	}
++
++	pxmitpriv->pxmitbuf = (u8 *)N_BYTE_ALIGMENT((SIZE_PTR)(pxmitpriv->pallocated_xmitbuf), 4);
++	//pxmitpriv->pxmitbuf = pxmitpriv->pallocated_xmitbuf + 4 -
++	//						((SIZE_PTR) (pxmitpriv->pallocated_xmitbuf) &3);
++
++	pxmitbuf = (struct xmit_buf*)pxmitpriv->pxmitbuf;
++
++	for (i = 0; i < NR_XMITBUFF; i++)
++	{
++		_rtw_init_listhead(&pxmitbuf->list);
++
++		pxmitbuf->priv_data = NULL;
++		pxmitbuf->padapter = padapter;
++		pxmitbuf->ext_tag = _FALSE;
++
++/*
++		pxmitbuf->pallocated_buf = rtw_zmalloc(MAX_XMITBUF_SZ + XMITBUF_ALIGN_SZ);
++		if (pxmitbuf->pallocated_buf == NULL)
++		{
++			res = _FAIL;
++			goto exit;
++		}
++
++		pxmitbuf->pbuf = (u8 *)N_BYTE_ALIGMENT((SIZE_PTR)(pxmitbuf->pallocated_buf), XMITBUF_ALIGN_SZ);
++		//pxmitbuf->pbuf = pxmitbuf->pallocated_buf + XMITBUF_ALIGN_SZ -((SIZE_PTR) (pxmitbuf->pallocated_buf) &(XMITBUF_ALIGN_SZ-1));
++*/
++
++		if((res=rtw_os_xmit_resource_alloc(padapter, pxmitbuf,(MAX_XMITBUF_SZ + XMITBUF_ALIGN_SZ))) == _FAIL) {
++			res= _FAIL;
++			goto exit;
++		}
++
++#ifdef CONFIG_SDIO_HCI
++		pxmitbuf->phead = pxmitbuf->pbuf;
++		pxmitbuf->pend = pxmitbuf->pbuf + MAX_XMITBUF_SZ;
++		pxmitbuf->len = 0;
++		pxmitbuf->pdata = pxmitbuf->ptail = pxmitbuf->phead;
++#endif
++
++		pxmitbuf->flags = XMIT_VO_QUEUE;
++		
++		rtw_list_insert_tail(&pxmitbuf->list, &(pxmitpriv->free_xmitbuf_queue.queue));
++		#ifdef DBG_XMIT_BUF
++		pxmitbuf->no=i;
++		#endif
++
++		pxmitbuf++;
++		
++	}
++
++	pxmitpriv->free_xmitbuf_cnt = NR_XMITBUFF;
++
++	/* init xframe_ext queue,  the same count as extbuf  */
++	_rtw_init_queue(&pxmitpriv->free_xframe_ext_queue);
++	
++	pxmitpriv->xframe_ext_alloc_addr = rtw_zvmalloc(NR_XMIT_EXTBUFF * sizeof(struct xmit_frame) + 4);
++	
++	if (pxmitpriv->xframe_ext_alloc_addr  == NULL){
++		pxmitpriv->xframe_ext = NULL;
++		RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("alloc xframe_ext fail!\n"));	
++		res= _FAIL;
++		goto exit;
++	}
++	pxmitpriv->xframe_ext = (u8 *)N_BYTE_ALIGMENT((SIZE_PTR)(pxmitpriv->xframe_ext_alloc_addr), 4);
++	pxframe = (struct xmit_frame*)pxmitpriv->xframe_ext;
++
++	for (i = 0; i < NR_XMIT_EXTBUFF; i++) {
++		_rtw_init_listhead(&(pxframe->list));
++
++		pxframe->padapter = padapter;
++		pxframe->frame_tag = NULL_FRAMETAG;
++
++		pxframe->pkt = NULL;		
++
++		pxframe->buf_addr = NULL;
++		pxframe->pxmitbuf = NULL;
++		
++		pxframe->ext_tag = 1;
++ 
++		rtw_list_insert_tail(&(pxframe->list), &(pxmitpriv->free_xframe_ext_queue.queue));
++
++		pxframe++;
++	}
++	pxmitpriv->free_xframe_ext_cnt = NR_XMIT_EXTBUFF;
++
++	// Init xmit extension buff
++	_rtw_init_queue(&pxmitpriv->free_xmit_extbuf_queue);
++
++	pxmitpriv->pallocated_xmit_extbuf = rtw_zvmalloc(NR_XMIT_EXTBUFF * sizeof(struct xmit_buf) + 4);
++	
++	if (pxmitpriv->pallocated_xmit_extbuf  == NULL){
++		RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("alloc xmit_extbuf fail!\n"));
++		res= _FAIL;
++		goto exit;
++	}
++
++	pxmitpriv->pxmit_extbuf = (u8 *)N_BYTE_ALIGMENT((SIZE_PTR)(pxmitpriv->pallocated_xmit_extbuf), 4);
++
++	pxmitbuf = (struct xmit_buf*)pxmitpriv->pxmit_extbuf;
++
++	for (i = 0; i < NR_XMIT_EXTBUFF; i++)
++	{
++		_rtw_init_listhead(&pxmitbuf->list);
++
++		pxmitbuf->priv_data = NULL;
++		pxmitbuf->padapter = padapter;
++		pxmitbuf->ext_tag = _TRUE;
++
++/*
++		pxmitbuf->pallocated_buf = rtw_zmalloc(MAX_XMIT_EXTBUF_SZ);
++		if (pxmitbuf->pallocated_buf == NULL)
++		{
++			res = _FAIL;
++			goto exit;
++		}
++
++		pxmitbuf->pbuf = (u8 *)N_BYTE_ALIGMENT((SIZE_PTR)(pxmitbuf->pallocated_buf), 4);
++*/		
++
++		if((res=rtw_os_xmit_resource_alloc(padapter, pxmitbuf,MAX_XMIT_EXTBUF_SZ + XMITBUF_ALIGN_SZ)) == _FAIL) {
++			res= _FAIL;
++			goto exit;
++		}
++		
++#ifdef CONFIG_SDIO_HCI
++		pxmitbuf->phead = pxmitbuf->pbuf;
++		pxmitbuf->pend = pxmitbuf->pbuf + MAX_XMIT_EXTBUF_SZ;
++		pxmitbuf->len = 0;
++		pxmitbuf->pdata = pxmitbuf->ptail = pxmitbuf->phead;
++#endif
++
++		rtw_list_insert_tail(&pxmitbuf->list, &(pxmitpriv->free_xmit_extbuf_queue.queue));
++		#ifdef DBG_XMIT_BUF
++		pxmitbuf->no=i;
++		#endif
++		pxmitbuf++;
++		
++	}
++
++	pxmitpriv->free_xmit_extbuf_cnt = NR_XMIT_EXTBUFF;
++
++	rtw_alloc_hwxmits(padapter);
++	rtw_init_hwxmits(pxmitpriv->hwxmits, pxmitpriv->hwxmit_entry);
++
++#ifdef CONFIG_USB_HCI
++	pxmitpriv->txirp_cnt=1;
++
++	_rtw_init_sema(&(pxmitpriv->tx_retevt), 0);
++
++	//per AC pending irp
++	pxmitpriv->beq_cnt = 0;
++	pxmitpriv->bkq_cnt = 0;
++	pxmitpriv->viq_cnt = 0;
++	pxmitpriv->voq_cnt = 0;
++#endif
++
++
++#ifdef CONFIG_XMIT_ACK
++	pxmitpriv->ack_tx = _FALSE;
++	_rtw_mutex_init(&pxmitpriv->ack_tx_mutex);
++	rtw_sctx_init(&pxmitpriv->ack_tx_ops, 0);	
++#endif
++
++	rtw_hal_init_xmit_priv(padapter);
++
++exit:
++
++_func_exit_;	
++
++	return res;
++}
++
++void  rtw_mfree_xmit_priv_lock (struct xmit_priv *pxmitpriv);
++void  rtw_mfree_xmit_priv_lock (struct xmit_priv *pxmitpriv)
++{
++	_rtw_spinlock_free(&pxmitpriv->lock);
++	_rtw_free_sema(&pxmitpriv->xmit_sema);
++	_rtw_free_sema(&pxmitpriv->terminate_xmitthread_sema);
++
++	_rtw_spinlock_free(&pxmitpriv->be_pending.lock);
++	_rtw_spinlock_free(&pxmitpriv->bk_pending.lock);
++	_rtw_spinlock_free(&pxmitpriv->vi_pending.lock);
++	_rtw_spinlock_free(&pxmitpriv->vo_pending.lock);
++	_rtw_spinlock_free(&pxmitpriv->bm_pending.lock);
++
++	//_rtw_spinlock_free(&pxmitpriv->legacy_dz_queue.lock);
++	//_rtw_spinlock_free(&pxmitpriv->apsd_queue.lock);
++
++	_rtw_spinlock_free(&pxmitpriv->free_xmit_queue.lock);
++	_rtw_spinlock_free(&pxmitpriv->free_xmitbuf_queue.lock);
++	_rtw_spinlock_free(&pxmitpriv->pending_xmitbuf_queue.lock);
++}
++
++
++void _rtw_free_xmit_priv (struct xmit_priv *pxmitpriv)
++{
++       int i;
++      _adapter *padapter = pxmitpriv->adapter;
++	struct xmit_frame	*pxmitframe = (struct xmit_frame*) pxmitpriv->pxmit_frame_buf;
++	struct xmit_buf *pxmitbuf = (struct xmit_buf *)pxmitpriv->pxmitbuf;
++
++ _func_enter_;   
++
++	rtw_hal_free_xmit_priv(padapter);
++ 
++	rtw_mfree_xmit_priv_lock(pxmitpriv);
++ 
++ 	if(pxmitpriv->pxmit_frame_buf==NULL)
++		goto out;
++	
++	for(i=0; i<NR_XMITFRAME; i++)
++	{	
++		rtw_os_xmit_complete(padapter, pxmitframe);
++
++		pxmitframe++;
++	}		
++	
++	for(i=0; i<NR_XMITBUFF; i++)
++	{
++		rtw_os_xmit_resource_free(padapter, pxmitbuf,(MAX_XMITBUF_SZ + XMITBUF_ALIGN_SZ));
++
++		//if(pxmitbuf->pallocated_buf)
++		//	rtw_mfree(pxmitbuf->pallocated_buf, MAX_XMITBUF_SZ + XMITBUF_ALIGN_SZ);
++		
++		pxmitbuf++;
++	}
++
++	if(pxmitpriv->pallocated_frame_buf) {
++		rtw_vmfree(pxmitpriv->pallocated_frame_buf, NR_XMITFRAME * sizeof(struct xmit_frame) + 4);
++	}
++	
++
++	if(pxmitpriv->pallocated_xmitbuf) {
++		rtw_vmfree(pxmitpriv->pallocated_xmitbuf, NR_XMITBUFF * sizeof(struct xmit_buf) + 4);
++	}
++
++	/* free xframe_ext queue,  the same count as extbuf  */
++	if ((pxmitframe = (struct xmit_frame*)pxmitpriv->xframe_ext)) {
++		for (i=0; i<NR_XMIT_EXTBUFF; i++) {
++			rtw_os_xmit_complete(padapter, pxmitframe);
++			pxmitframe++;
++		}
++	}
++	if (pxmitpriv->xframe_ext_alloc_addr)
++		rtw_vmfree(pxmitpriv->xframe_ext_alloc_addr, NR_XMIT_EXTBUFF * sizeof(struct xmit_frame) + 4);
++	_rtw_spinlock_free(&pxmitpriv->free_xframe_ext_queue.lock);
++
++	// free xmit extension buff
++	_rtw_spinlock_free(&pxmitpriv->free_xmit_extbuf_queue.lock);
++
++	pxmitbuf = (struct xmit_buf *)pxmitpriv->pxmit_extbuf;
++	for(i=0; i<NR_XMIT_EXTBUFF; i++)
++	{
++		rtw_os_xmit_resource_free(padapter, pxmitbuf,(MAX_XMIT_EXTBUF_SZ + XMITBUF_ALIGN_SZ));
++
++		//if(pxmitbuf->pallocated_buf)
++		//	rtw_mfree(pxmitbuf->pallocated_buf, MAX_XMIT_EXTBUF_SZ);
++		
++		pxmitbuf++;
++	}
++
++	if(pxmitpriv->pallocated_xmit_extbuf) {
++		rtw_vmfree(pxmitpriv->pallocated_xmit_extbuf, NR_XMIT_EXTBUFF * sizeof(struct xmit_buf) + 4);	
++	}
++
++	rtw_free_hwxmits(padapter);
++
++#ifdef CONFIG_XMIT_ACK	
++	_rtw_mutex_free(&pxmitpriv->ack_tx_mutex);	
++#endif	
++
++out:	
++
++_func_exit_;		
++
++}
++
++static void update_attrib_vcs_info(_adapter *padapter, struct xmit_frame *pxmitframe)
++{
++	u32	sz;
++	struct pkt_attrib	*pattrib = &pxmitframe->attrib;
++	struct sta_info	*psta = pattrib->psta;
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++        if(pattrib->psta)
++	{
++		psta = pattrib->psta;
++	}
++	else
++	{
++		DBG_871X("%s, call rtw_get_stainfo()\n", __func__);
++		psta=rtw_get_stainfo(&padapter->stapriv ,&pattrib->ra[0] );
++	}
++
++        if(psta==NULL)
++	{
++		DBG_871X("%s, psta==NUL\n", __func__);
++		return;
++	}
++
++	if(!(psta->state &_FW_LINKED))
++	{
++		DBG_871X("%s, psta->state(0x%x) != _FW_LINKED\n", __func__, psta->state);
++		return;
++	}
++
++	if (pattrib->nr_frags != 1)
++	{
++		sz = padapter->xmitpriv.frag_len;
++	}
++	else //no frag
++	{
++		sz = pattrib->last_txcmdsz;
++	}
++
++	// (1) RTS_Threshold is compared to the MPDU, not MSDU.
++	// (2) If there are more than one frag in  this MSDU, only the first frag uses protection frame.
++	//		Other fragments are protected by previous fragment.
++	//		So we only need to check the length of first fragment.
++	if(pmlmeext->cur_wireless_mode < WIRELESS_11_24N  || padapter->registrypriv.wifi_spec)
++	{
++		if(sz > padapter->registrypriv.rts_thresh)
++		{
++			pattrib->vcs_mode = RTS_CTS;
++		}
++		else
++		{
++			if(psta->rtsen)
++				pattrib->vcs_mode = RTS_CTS;
++			else if(psta->cts2self)
++				pattrib->vcs_mode = CTS_TO_SELF;
++			else
++				pattrib->vcs_mode = NONE_VCS;
++		}
++	}
++	else
++	{
++		while (_TRUE)
++		{
++#if 0 //Todo
++			//check IOT action
++			if(pHTInfo->IOTAction & HT_IOT_ACT_FORCED_CTS2SELF)
++			{
++				pattrib->vcs_mode = CTS_TO_SELF;
++				pattrib->rts_rate = MGN_24M;
++				break;
++			}
++			else if(pHTInfo->IOTAction & (HT_IOT_ACT_FORCED_RTS|HT_IOT_ACT_PURE_N_MODE))
++			{
++				pattrib->vcs_mode = RTS_CTS;
++				pattrib->rts_rate = MGN_24M;
++				break;
++			}
++#endif
++
++			//IOT action
++			if((pmlmeinfo->assoc_AP_vendor == atherosAP) && (pattrib->ampdu_en==_TRUE) &&
++				(padapter->securitypriv.dot11PrivacyAlgrthm == _AES_ ))
++			{
++				pattrib->vcs_mode = CTS_TO_SELF;
++				break;
++			}	
++			
++
++			//check ERP protection
++			if(psta->rtsen || psta->cts2self)
++			{
++				if(psta->rtsen)
++					pattrib->vcs_mode = RTS_CTS;
++				else if(psta->cts2self)
++					pattrib->vcs_mode = CTS_TO_SELF;
++
++				break;
++			}
++
++			//check HT op mode
++			if(pattrib->ht_en)
++			{
++				u8 HTOpMode = pmlmeinfo->HT_protection;
++				if((pmlmeext->cur_bwmode && (HTOpMode == 2 || HTOpMode == 3)) ||
++					(!pmlmeext->cur_bwmode && HTOpMode == 3) )
++				{
++					pattrib->vcs_mode = RTS_CTS;
++					break;
++				}
++			}
++
++			//check rts
++			if(sz > padapter->registrypriv.rts_thresh)
++			{
++				pattrib->vcs_mode = RTS_CTS;
++				break;
++			}
++
++			//to do list: check MIMO power save condition.
++
++			//check AMPDU aggregation for TXOP
++			if(pattrib->ampdu_en==_TRUE)
++			{
++				pattrib->vcs_mode = RTS_CTS;
++				break;
++			}
++
++			pattrib->vcs_mode = NONE_VCS;
++			break;
++		}
++	}
++}
++
++static void update_attrib_phy_info(struct pkt_attrib *pattrib, struct sta_info *psta)
++{
++	/*if(psta->rtsen)	
++		pattrib->vcs_mode = RTS_CTS;	
++	else if(psta->cts2self)	
++		pattrib->vcs_mode = CTS_TO_SELF;	
++	else
++		pattrib->vcs_mode = NONE_VCS;*/
++	
++	pattrib->mdata = 0;
++	pattrib->eosp = 0;
++	pattrib->triggered=0;
++	
++	//qos_en, ht_en, init rate, ,bw, ch_offset, sgi
++	pattrib->qos_en = psta->qos_option;
++	pattrib->ht_en = psta->htpriv.ht_option;
++	pattrib->raid = psta->raid;
++	pattrib->bwmode = psta->htpriv.bwmode;
++	pattrib->ch_offset = psta->htpriv.ch_offset;
++	pattrib->sgi= psta->htpriv.sgi;
++	pattrib->ampdu_en = _FALSE;
++
++	//if(pattrib->ht_en && psta->htpriv.ampdu_enable)
++	//{
++	//	if(psta->htpriv.agg_enable_bitmap & BIT(pattrib->priority))
++	//		pattrib->ampdu_en = _TRUE;
++	//}	
++
++
++	pattrib->retry_ctrl = _FALSE;
++
++}
++
++u8	qos_acm(u8 acm_mask, u8 priority)
++{
++	u8	change_priority = priority;
++
++	switch (priority)
++	{
++		case 0:
++		case 3:
++			if(acm_mask & BIT(1))
++				change_priority = 1;
++			break;
++		case 1:
++		case 2:
++			break;
++		case 4:
++		case 5:
++			if(acm_mask & BIT(2))
++				change_priority = 0;
++			break;
++		case 6:
++		case 7:
++			if(acm_mask & BIT(3))
++				change_priority = 5;
++			break;
++		default:
++			DBG_871X("qos_acm(): invalid pattrib->priority: %d!!!\n", priority);
++			break;
++	}
++
++	return change_priority;
++}
++
++static void set_qos(struct pkt_file *ppktfile, struct pkt_attrib *pattrib)
++{
++	struct ethhdr etherhdr;
++	struct iphdr ip_hdr;
++	s32 UserPriority = 0;
++
++
++	_rtw_open_pktfile(ppktfile->pkt, ppktfile);
++	_rtw_pktfile_read(ppktfile, (unsigned char*)&etherhdr, ETH_HLEN);
++
++	// get UserPriority from IP hdr
++	if (pattrib->ether_type == 0x0800) {
++		_rtw_pktfile_read(ppktfile, (u8*)&ip_hdr, sizeof(ip_hdr));
++//		UserPriority = (ntohs(ip_hdr.tos) >> 5) & 0x3;
++		UserPriority = ip_hdr.tos >> 5;
++	} else if (pattrib->ether_type == 0x888e) {
++		// "When priority processing of data frames is supported,
++		// a STA's SME should send EAPOL-Key frames at the highest priority."
++		UserPriority = 7;
++	}
++
++	pattrib->priority = UserPriority;
++	pattrib->hdrlen = WLAN_HDR_A3_QOS_LEN;
++	pattrib->subtype = WIFI_QOS_DATA_TYPE;
++}
++
++static s32 update_attrib(_adapter *padapter, _pkt *pkt, struct pkt_attrib *pattrib)
++{
++	uint i;
++	struct pkt_file pktfile;
++	struct sta_info *psta = NULL;
++	struct ethhdr etherhdr;
++
++	sint bmcast;
++	struct sta_priv		*pstapriv = &padapter->stapriv;
++	struct security_priv	*psecuritypriv = &padapter->securitypriv;
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	struct qos_priv		*pqospriv= &pmlmepriv->qospriv;
++	sint res = _SUCCESS;
++
++ _func_enter_;
++
++	_rtw_open_pktfile(pkt, &pktfile);
++	i = _rtw_pktfile_read(&pktfile, (u8*)&etherhdr, ETH_HLEN);
++
++	pattrib->ether_type = ntohs(etherhdr.h_proto);
++
++
++	_rtw_memcpy(pattrib->dst, &etherhdr.h_dest, ETH_ALEN);
++	_rtw_memcpy(pattrib->src, &etherhdr.h_source, ETH_ALEN);
++
++	pattrib->pctrl = 0;
++
++	if ((check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == _TRUE) ||
++		(check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE)) {
++		_rtw_memcpy(pattrib->ra, pattrib->dst, ETH_ALEN);
++		_rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN);
++	}
++	else if (check_fwstate(pmlmepriv, WIFI_STATION_STATE)) {
++		_rtw_memcpy(pattrib->ra, get_bssid(pmlmepriv), ETH_ALEN);
++		_rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN);
++	}
++	else if (check_fwstate(pmlmepriv, WIFI_AP_STATE)) {
++		_rtw_memcpy(pattrib->ra, pattrib->dst, ETH_ALEN);
++		_rtw_memcpy(pattrib->ta, get_bssid(pmlmepriv), ETH_ALEN);
++	}
++
++	pattrib->pktlen = pktfile.pkt_len;
++
++	if (ETH_P_IP == pattrib->ether_type)
++	{
++		// The following is for DHCP and ARP packet, we use cck1M to tx these packets and let LPS awake some time 
++		// to prevent DHCP protocol fail
++		u8 tmp[24];
++		_rtw_pktfile_read(&pktfile, &tmp[0], 24);
++		pattrib->dhcp_pkt = 0;
++		if (pktfile.pkt_len > 282) {//MINIMUM_DHCP_PACKET_SIZE) {
++			if (ETH_P_IP == pattrib->ether_type) {// IP header
++				if (((tmp[21] == 68) && (tmp[23] == 67)) ||
++					((tmp[21] == 67) && (tmp[23] == 68))) {
++					// 68 : UDP BOOTP client
++					// 67 : UDP BOOTP server
++					RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("======================update_attrib: get DHCP Packet \n"));
++					// Use low rate to send DHCP packet.
++					//if(pMgntInfo->IOTAction & HT_IOT_ACT_WA_IOT_Broadcom) 
++					//{
++					//	tcb_desc->DataRate = MgntQuery_TxRateExcludeCCKRates(ieee);//0xc;//ofdm 6m
++					//	tcb_desc->bTxDisableRateFallBack = false;
++					//}
++					//else
++					//	pTcb->DataRate = Adapter->MgntInfo.LowestBasicRate; 
++					//RTPRINT(FDM, WA_IOT, ("DHCP TranslateHeader(), pTcb->DataRate = 0x%x\n", pTcb->DataRate)); 
++					pattrib->dhcp_pkt = 1;
++				}
++			}
++		}
++	}
++
++	if ( (pattrib->ether_type == 0x888e) || (pattrib->dhcp_pkt == 1) )
++	{
++		rtw_set_scan_deny(padapter, 3000);
++	}
++
++#ifdef CONFIG_LPS
++	// If EAPOL , ARP , OR DHCP packet, driver must be in active mode.
++	if ( (pattrib->ether_type == 0x0806) || (pattrib->ether_type == 0x888e) || (pattrib->dhcp_pkt == 1) )
++	{
++		rtw_lps_ctrl_wk_cmd(padapter, LPS_CTRL_SPECIAL_PACKET, 1);
++	}
++#endif
++
++	bmcast = IS_MCAST(pattrib->ra);
++	
++	// get sta_info
++	if (bmcast) {
++		psta = rtw_get_bcmc_stainfo(padapter);
++	} else {
++		psta = rtw_get_stainfo(pstapriv, pattrib->ra);
++		if (psta == NULL)	{ // if we cannot get psta => drrp the pkt
++			RT_TRACE(_module_rtl871x_xmit_c_, _drv_alert_, ("\nupdate_attrib => get sta_info fail, ra:" MAC_FMT"\n", MAC_ARG(pattrib->ra)));
++			#ifdef DBG_TX_DROP_FRAME
++			DBG_871X("DBG_TX_DROP_FRAME %s get sta_info fail, ra:" MAC_FMT"\n", __FUNCTION__, MAC_ARG(pattrib->ra));
++			#endif
++			res =_FAIL;
++			goto exit;
++		}
++		else if((check_fwstate(pmlmepriv, WIFI_AP_STATE)==_TRUE)&&(!(psta->state & _FW_LINKED)))
++		{
++			res =_FAIL;
++			goto exit;
++		}
++	}
++
++	if (psta)
++	{
++		pattrib->mac_id = psta->mac_id;
++		pattrib->psta = psta;
++	}
++	else
++	{
++		// if we cannot get psta => drop the pkt
++		RT_TRACE(_module_rtl871x_xmit_c_, _drv_alert_, ("\nupdate_attrib => get sta_info fail, ra:" MAC_FMT "\n", MAC_ARG(pattrib->ra)));
++		#ifdef DBG_TX_DROP_FRAME
++		DBG_871X("DBG_TX_DROP_FRAME %s get sta_info fail, ra:" MAC_FMT"\n", __FUNCTION__, MAC_ARG(pattrib->ra));
++		#endif
++		res = _FAIL;
++		goto exit;
++	}
++
++	pattrib->ack_policy = 0;
++	// get ether_hdr_len
++	pattrib->pkt_hdrlen = ETH_HLEN;//(pattrib->ether_type == 0x8100) ? (14 + 4 ): 14; //vlan tag
++
++	pattrib->hdrlen = WLAN_HDR_A3_LEN;
++	pattrib->subtype = WIFI_DATA_TYPE;	
++	pattrib->priority = 0;
++	
++	if (check_fwstate(pmlmepriv, WIFI_AP_STATE|WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE))
++	{
++		if(psta->qos_option)
++			set_qos(&pktfile, pattrib);
++	}
++	else
++	{
++		if(pqospriv->qos_option)
++		{
++			set_qos(&pktfile, pattrib);
++
++			if(pmlmepriv->acm_mask != 0)
++			{
++				pattrib->priority = qos_acm(pmlmepriv->acm_mask, pattrib->priority);
++			}
++		}
++	}
++
++	//pattrib->priority = 5; //force to used VI queue, for testing
++
++	if (psta->ieee8021x_blocked == _TRUE)
++	{
++		RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("\n psta->ieee8021x_blocked == _TRUE \n"));
++
++		pattrib->encrypt = 0;
++
++		if((pattrib->ether_type != 0x888e) && (check_fwstate(pmlmepriv, WIFI_MP_STATE) == _FALSE))
++		{
++			RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("\npsta->ieee8021x_blocked == _TRUE,  pattrib->ether_type(%.4x) != 0x888e\n",pattrib->ether_type));
++			#ifdef DBG_TX_DROP_FRAME
++			DBG_871X("DBG_TX_DROP_FRAME %s psta->ieee8021x_blocked == _TRUE,  pattrib->ether_type(%.4x) != 0x888e\n", __FUNCTION__,pattrib->ether_type);
++			#endif
++			res = _FAIL;
++			goto exit;
++		}
++	}
++	else
++	{
++		GET_ENCRY_ALGO(psecuritypriv, psta, pattrib->encrypt, bmcast);
++
++		switch(psecuritypriv->dot11AuthAlgrthm)
++		{
++			case dot11AuthAlgrthm_Open:
++			case dot11AuthAlgrthm_Shared:
++			case dot11AuthAlgrthm_Auto:				
++				pattrib->key_idx = (u8)psecuritypriv->dot11PrivacyKeyIndex;
++				break;
++			case dot11AuthAlgrthm_8021X:
++				if(bmcast)					
++					pattrib->key_idx = (u8)psecuritypriv->dot118021XGrpKeyid;	
++				else
++					pattrib->key_idx = 0;
++				break;
++			default:
++				pattrib->key_idx = 0;
++				break;
++		}
++		
++			
++	}
++
++	switch (pattrib->encrypt)
++	{
++		case _WEP40_:
++		case _WEP104_:
++			pattrib->iv_len = 4;
++			pattrib->icv_len = 4;
++			break;
++
++		case _TKIP_:
++			pattrib->iv_len = 8;
++			pattrib->icv_len = 4;
++			
++			if(padapter->securitypriv.busetkipkey==_FAIL)
++			{
++				RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("\npadapter->securitypriv.busetkipkey(%d)==_FAIL drop packet\n", padapter->securitypriv.busetkipkey));
++				#ifdef DBG_TX_DROP_FRAME
++				DBG_871X("DBG_TX_DROP_FRAME %s padapter->securitypriv.busetkipkey(%d)==_FAIL drop packet\n", __FUNCTION__, padapter->securitypriv.busetkipkey);
++				#endif
++				res =_FAIL;
++				goto exit;
++			}
++					
++			break;			
++		case _AES_:
++			RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("\n pattrib->encrypt=%d  (_AES_)\n",pattrib->encrypt));
++			pattrib->iv_len = 8;
++			pattrib->icv_len = 8;
++			break;
++			
++		default:
++			pattrib->iv_len = 0;
++			pattrib->icv_len = 0;
++			break;
++	}
++
++	RT_TRACE(_module_rtl871x_xmit_c_, _drv_info_,
++		 ("update_attrib: encrypt=%d  securitypriv.sw_encrypt=%d\n",
++		  pattrib->encrypt, padapter->securitypriv.sw_encrypt));
++
++	if (pattrib->encrypt &&
++	    ((padapter->securitypriv.sw_encrypt == _TRUE) || (psecuritypriv->hw_decrypted == _FALSE)))
++	{
++		pattrib->bswenc = _TRUE;
++		RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,
++			 ("update_attrib: encrypt=%d securitypriv.hw_decrypted=%d bswenc=_TRUE\n",
++			  pattrib->encrypt, padapter->securitypriv.sw_encrypt));
++	} else {
++		pattrib->bswenc = _FALSE;
++		RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("update_attrib: bswenc=_FALSE\n"));
++	}
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if((pattrib->encrypt && bmcast) || (pattrib->encrypt ==_WEP40_) || (pattrib->encrypt ==_WEP104_))
++	{
++		pattrib->bswenc = _TRUE;//force using sw enc.
++	}
++#endif
++
++	rtw_set_tx_chksum_offload(pkt, pattrib);
++
++	update_attrib_phy_info(pattrib, psta);
++
++exit:
++
++_func_exit_;
++
++	return res;
++}
++
++static s32 xmitframe_addmic(_adapter *padapter, struct xmit_frame *pxmitframe){
++	sint 			curfragnum,length;
++	u8	*pframe, *payload,mic[8];
++	struct	mic_data		micdata;
++	struct	sta_info		*stainfo;
++	struct	qos_priv   *pqospriv= &(padapter->mlmepriv.qospriv);	
++	struct	pkt_attrib	 *pattrib = &pxmitframe->attrib;
++	struct 	security_priv	*psecuritypriv=&padapter->securitypriv;
++	struct	xmit_priv		*pxmitpriv=&padapter->xmitpriv;
++	u8 priority[4]={0x0,0x0,0x0,0x0};
++	sint bmcst = IS_MCAST(pattrib->ra);
++
++	if(pattrib->psta)
++	{
++		stainfo = pattrib->psta;
++	}
++	else
++	{
++		DBG_871X("%s, call rtw_get_stainfo()\n", __func__);
++		stainfo=rtw_get_stainfo(&padapter->stapriv ,&pattrib->ra[0]);
++	}	
++
++	if(stainfo==NULL)
++	{
++		DBG_871X("%s, psta==NUL\n", __func__);
++		return _FAIL;
++	}
++	
++	if(!(stainfo->state &_FW_LINKED))
++	{
++		DBG_871X("%s, psta->state(0x%x) != _FW_LINKED\n", __func__, stainfo->state);
++		return _FAIL;
++	}
++
++_func_enter_;
++
++	if(pattrib->encrypt ==_TKIP_)//if(psecuritypriv->dot11PrivacyAlgrthm==_TKIP_PRIVACY_) 
++	{
++		//encode mic code
++		if(stainfo!= NULL){
++			u8 null_key[16]={0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0};
++
++#ifdef CONFIG_USB_TX_AGGREGATION
++			pframe = pxmitframe->buf_addr + TXDESC_SIZE + (pxmitframe->pkt_offset * PACKET_OFFSET_SZ);
++#else
++			pframe = pxmitframe->buf_addr + TXDESC_OFFSET;
++#endif
++			
++			if(bmcst)
++			{
++				if(_rtw_memcmp(psecuritypriv->dot118021XGrptxmickey[psecuritypriv->dot118021XGrpKeyid].skey, null_key, 16)==_TRUE){
++					//DbgPrint("\nxmitframe_addmic:stainfo->dot11tkiptxmickey==0\n");
++					//rtw_msleep_os(10);
++					return _FAIL;
++				}				
++				//start to calculate the mic code
++				rtw_secmicsetkey(&micdata, psecuritypriv->dot118021XGrptxmickey[psecuritypriv->dot118021XGrpKeyid].skey);
++			}
++			else
++			{
++				if(_rtw_memcmp(&stainfo->dot11tkiptxmickey.skey[0],null_key, 16)==_TRUE){
++					//DbgPrint("\nxmitframe_addmic:stainfo->dot11tkiptxmickey==0\n");
++					//rtw_msleep_os(10);
++					return _FAIL;
++				}
++				//start to calculate the mic code
++				rtw_secmicsetkey(&micdata, &stainfo->dot11tkiptxmickey.skey[0]);
++			}
++			
++			if(pframe[1]&1){   //ToDS==1
++				rtw_secmicappend(&micdata, &pframe[16], 6);  //DA
++				if(pframe[1]&2)  //From Ds==1
++					rtw_secmicappend(&micdata, &pframe[24], 6);
++				else
++				rtw_secmicappend(&micdata, &pframe[10], 6);		
++			}	
++			else{	//ToDS==0
++				rtw_secmicappend(&micdata, &pframe[4], 6);   //DA
++				if(pframe[1]&2)  //From Ds==1
++					rtw_secmicappend(&micdata, &pframe[16], 6);
++				else
++					rtw_secmicappend(&micdata, &pframe[10], 6);
++
++			}
++
++                    //if(pqospriv->qos_option==1)
++                    if(pattrib->qos_en)
++				priority[0]=(u8)pxmitframe->attrib.priority;
++
++			
++			rtw_secmicappend(&micdata, &priority[0], 4);
++	
++			payload=pframe;
++
++			for(curfragnum=0;curfragnum<pattrib->nr_frags;curfragnum++){
++				payload=(u8 *)RND4((SIZE_PTR)(payload));
++				RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("===curfragnum=%d, pframe= 0x%.2x, 0x%.2x, 0x%.2x, 0x%.2x, 0x%.2x, 0x%.2x, 0x%.2x, 0x%.2x,!!!\n",
++					curfragnum,*payload, *(payload+1),*(payload+2),*(payload+3),*(payload+4),*(payload+5),*(payload+6),*(payload+7)));
++
++				payload=payload+pattrib->hdrlen+pattrib->iv_len;
++				RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("curfragnum=%d pattrib->hdrlen=%d pattrib->iv_len=%d",curfragnum,pattrib->hdrlen,pattrib->iv_len));
++				if((curfragnum+1)==pattrib->nr_frags){
++					length=pattrib->last_txcmdsz-pattrib->hdrlen-pattrib->iv_len-( (pattrib->bswenc) ? pattrib->icv_len : 0);
++					rtw_secmicappend(&micdata, payload,length);
++					payload=payload+length;
++				}
++				else{
++					length=pxmitpriv->frag_len-pattrib->hdrlen-pattrib->iv_len-( (pattrib->bswenc) ? pattrib->icv_len : 0);
++					rtw_secmicappend(&micdata, payload, length);
++					payload=payload+length+pattrib->icv_len;
++					RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("curfragnum=%d length=%d pattrib->icv_len=%d",curfragnum,length,pattrib->icv_len));
++				}
++			}
++			rtw_secgetmic(&micdata,&(mic[0]));
++			RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("xmitframe_addmic: before add mic code!!!\n"));
++			RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("xmitframe_addmic: pattrib->last_txcmdsz=%d!!!\n",pattrib->last_txcmdsz));
++			RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("xmitframe_addmic: mic[0]=0x%.2x ,mic[1]=0x%.2x ,mic[2]=0x%.2x ,mic[3]=0x%.2x \n\
++  mic[4]=0x%.2x ,mic[5]=0x%.2x ,mic[6]=0x%.2x ,mic[7]=0x%.2x !!!!\n",
++				mic[0],mic[1],mic[2],mic[3],mic[4],mic[5],mic[6],mic[7]));
++			//add mic code  and add the mic code length in last_txcmdsz
++
++			_rtw_memcpy(payload, &(mic[0]),8);
++			pattrib->last_txcmdsz+=8;
++			
++			RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("\n ========last pkt========\n"));
++			payload=payload-pattrib->last_txcmdsz+8;
++			for(curfragnum=0;curfragnum<pattrib->last_txcmdsz;curfragnum=curfragnum+8)
++					RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,(" %.2x,  %.2x,  %.2x,  %.2x,  %.2x,  %.2x,  %.2x,  %.2x ",
++					*(payload+curfragnum), *(payload+curfragnum+1), *(payload+curfragnum+2),*(payload+curfragnum+3),
++					*(payload+curfragnum+4),*(payload+curfragnum+5),*(payload+curfragnum+6),*(payload+curfragnum+7)));
++			}
++			else{
++				RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("xmitframe_addmic: rtw_get_stainfo==NULL!!!\n"));
++			}
++	}
++	
++_func_exit_;
++
++	return _SUCCESS;
++}
++
++static s32 xmitframe_swencrypt(_adapter *padapter, struct xmit_frame *pxmitframe){
++
++	struct	pkt_attrib	 *pattrib = &pxmitframe->attrib;
++	//struct 	security_priv	*psecuritypriv=&padapter->securitypriv;
++	
++_func_enter_;
++
++	//if((psecuritypriv->sw_encrypt)||(pattrib->bswenc))	
++	if(pattrib->bswenc)
++	{
++		//DBG_871X("start xmitframe_swencrypt\n");
++		RT_TRACE(_module_rtl871x_xmit_c_,_drv_alert_,("### xmitframe_swencrypt\n"));
++		switch(pattrib->encrypt){
++		case _WEP40_:
++		case _WEP104_:
++			rtw_wep_encrypt(padapter, (u8 *)pxmitframe);
++			break;
++		case _TKIP_:
++			rtw_tkip_encrypt(padapter, (u8 *)pxmitframe);
++			break;
++		case _AES_:
++			rtw_aes_encrypt(padapter, (u8 * )pxmitframe);
++			break;
++		default:
++				break;
++		}
++
++	} else {
++		RT_TRACE(_module_rtl871x_xmit_c_,_drv_notice_,("### xmitframe_hwencrypt\n"));
++	}
++
++_func_exit_;
++
++	return _SUCCESS;
++}
++
++s32 rtw_make_wlanhdr (_adapter *padapter , u8 *hdr, struct pkt_attrib *pattrib)
++{
++	u16 *qc;
++
++	struct rtw_ieee80211_hdr *pwlanhdr = (struct rtw_ieee80211_hdr *)hdr;
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	struct qos_priv *pqospriv = &pmlmepriv->qospriv;
++	u8 qos_option = _FALSE;
++#ifdef CONFIG_TDLS
++	struct tdls_info *ptdlsinfo = &padapter->tdlsinfo;
++	struct sta_priv 	*pstapriv = &padapter->stapriv;
++	struct sta_info *ptdls_sta=NULL, *psta_backup=NULL;
++	u8 direct_link=0;
++#endif //CONFIG_TDLS
++
++	sint res = _SUCCESS;
++	u16 *fctrl = &pwlanhdr->frame_ctl;
++
++	struct sta_info *psta;
++
++	sint bmcst = IS_MCAST(pattrib->ra);
++
++_func_enter_;
++
++	if (pattrib->psta) {
++		psta = pattrib->psta;
++	} else {
++		DBG_871X("%s, call rtw_get_stainfo()\n", __func__);
++		if(bmcst) {
++			psta = rtw_get_bcmc_stainfo(padapter);
++		} else {
++			psta = rtw_get_stainfo(&padapter->stapriv, pattrib->ra);
++		}
++	}
++
++	if(psta==NULL)
++	{
++		DBG_871X("%s, psta==NUL\n", __func__);
++		return _FAIL;
++	}
++
++	if(!(psta->state &_FW_LINKED))
++	{
++		DBG_871X("%s, psta->state(0x%x) != _FW_LINKED\n", __func__, psta->state);
++		return _FAIL;
++	}
++
++	_rtw_memset(hdr, 0, WLANHDR_OFFSET);
++
++	SetFrameSubType(fctrl, pattrib->subtype);
++
++	if (pattrib->subtype & WIFI_DATA_TYPE)
++	{
++		if ((check_fwstate(pmlmepriv,  WIFI_STATION_STATE) == _TRUE)) {
++			//to_ds = 1, fr_ds = 0;
++#ifdef CONFIG_TDLS
++			if((ptdlsinfo->setup_state == TDLS_LINKED_STATE)){
++				ptdls_sta = rtw_get_stainfo(pstapriv, pattrib->dst);
++				if((ptdls_sta!=NULL)&&(ptdls_sta->tdls_sta_state & TDLS_LINKED_STATE)&&(pattrib->ether_type!=0x0806)){
++					//TDLS data transfer, ToDS=0, FrDs=0
++					_rtw_memcpy(pwlanhdr->addr1, pattrib->dst, ETH_ALEN);
++					_rtw_memcpy(pwlanhdr->addr2, pattrib->src, ETH_ALEN);
++					_rtw_memcpy(pwlanhdr->addr3, get_bssid(pmlmepriv), ETH_ALEN);
++					direct_link=1;
++				}else{
++					// 1.Data transfer to AP
++					// 2.Arp pkt will relayed by AP
++					SetToDs(fctrl);							
++					_rtw_memcpy(pwlanhdr->addr1, get_bssid(pmlmepriv), ETH_ALEN);
++					_rtw_memcpy(pwlanhdr->addr2, pattrib->src, ETH_ALEN);
++					_rtw_memcpy(pwlanhdr->addr3, pattrib->dst, ETH_ALEN);
++				} 
++			}else
++#endif //CONFIG_TDLS
++			{
++				//Data transfer to AP
++				SetToDs(fctrl);							
++				_rtw_memcpy(pwlanhdr->addr1, get_bssid(pmlmepriv), ETH_ALEN);
++				_rtw_memcpy(pwlanhdr->addr2, pattrib->src, ETH_ALEN);
++				_rtw_memcpy(pwlanhdr->addr3, pattrib->dst, ETH_ALEN);
++			} 
++
++			if (pqospriv->qos_option)
++				qos_option = _TRUE;
++
++		}
++		else if ((check_fwstate(pmlmepriv,  WIFI_AP_STATE) == _TRUE) ) {
++			//to_ds = 0, fr_ds = 1;
++			SetFrDs(fctrl);
++			_rtw_memcpy(pwlanhdr->addr1, pattrib->dst, ETH_ALEN);
++			_rtw_memcpy(pwlanhdr->addr2, get_bssid(pmlmepriv), ETH_ALEN);
++			_rtw_memcpy(pwlanhdr->addr3, pattrib->src, ETH_ALEN);
++
++			if(psta->qos_option)			
++				qos_option = _TRUE;
++		}
++		else if ((check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == _TRUE) ||
++		(check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE)) {
++			_rtw_memcpy(pwlanhdr->addr1, pattrib->dst, ETH_ALEN);
++			_rtw_memcpy(pwlanhdr->addr2, pattrib->src, ETH_ALEN);
++			_rtw_memcpy(pwlanhdr->addr3, get_bssid(pmlmepriv), ETH_ALEN);
++
++			if(psta->qos_option)			
++				qos_option = _TRUE;
++		}
++		else {
++			RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("fw_state:%x is not allowed to xmit frame\n", get_fwstate(pmlmepriv)));
++			res = _FAIL;
++			goto exit;
++		}
++
++		if(pattrib->mdata)
++			SetMData(fctrl);
++
++		if (pattrib->encrypt)
++			SetPrivacy(fctrl);
++
++		if (qos_option)
++		{
++			qc = (unsigned short *)(hdr + pattrib->hdrlen - 2);
++
++			if (pattrib->priority)
++				SetPriority(qc, pattrib->priority);
++
++			SetEOSP(qc, pattrib->eosp);
++
++			SetAckpolicy(qc, pattrib->ack_policy);
++		}
++
++		//TODO: fill HT Control Field
++
++		//Update Seq Num will be handled by f/w
++		{
++			if(psta){
++#ifdef CONFIG_TDLS
++				if(direct_link==1)
++				{
++					psta_backup = psta;
++					psta = ptdls_sta;
++				}
++#endif //CONFIG_TDLS
++
++				psta->sta_xmitpriv.txseq_tid[pattrib->priority]++;
++				psta->sta_xmitpriv.txseq_tid[pattrib->priority] &= 0xFFF;
++
++				pattrib->seqnum = psta->sta_xmitpriv.txseq_tid[pattrib->priority];
++
++				SetSeqNum(hdr, pattrib->seqnum);
++
++
++				//check if enable ampdu
++				if(pattrib->ht_en && psta->htpriv.ampdu_enable)
++				{
++					if(psta->htpriv.agg_enable_bitmap & BIT(pattrib->priority))
++					pattrib->ampdu_en = _TRUE;
++				}
++
++				//re-check if enable ampdu by BA_starting_seqctrl
++				if(pattrib->ampdu_en == _TRUE)
++				{					
++					u16 tx_seq;
++
++					tx_seq = psta->BA_starting_seqctrl[pattrib->priority & 0x0f];
++		
++					//check BA_starting_seqctrl
++					if(SN_LESS(pattrib->seqnum, tx_seq))
++					{
++						//DBG_871X("tx ampdu seqnum(%d) < tx_seq(%d)\n", pattrib->seqnum, tx_seq);
++						pattrib->ampdu_en = _FALSE;//AGG BK
++					}
++					else if(SN_EQUAL(pattrib->seqnum, tx_seq))
++					{					
++						psta->BA_starting_seqctrl[pattrib->priority & 0x0f] = (tx_seq+1)&0xfff;
++					
++						pattrib->ampdu_en = _TRUE;//AGG EN
++					}
++					else
++					{
++						//DBG_871X("tx ampdu over run\n");
++						psta->BA_starting_seqctrl[pattrib->priority & 0x0f] = (pattrib->seqnum+1)&0xfff;
++						pattrib->ampdu_en = _TRUE;//AGG EN
++					}
++
++				}
++
++#ifdef CONFIG_TDLS
++				if(direct_link==1)
++				{
++					if (pattrib->encrypt){
++						pattrib->encrypt= _AES_;
++						pattrib->iv_len=8;
++						pattrib->icv_len=8;
++					}
++
++					//qos_en, ht_en, init rate, ,bw, ch_offset, sgi
++					//pattrib->qos_en = ptdls_sta->qos_option;
++					pattrib->ht_en = ptdls_sta->htpriv.ht_option;
++					pattrib->raid = ptdls_sta->raid;
++					pattrib->bwmode = ptdls_sta->htpriv.bwmode;
++					pattrib->ch_offset = ptdls_sta->htpriv.ch_offset;
++					pattrib->sgi= ptdls_sta->htpriv.sgi;
++
++					pattrib->mac_id = ptdls_sta->mac_id;
++
++					psta = psta_backup;
++				}
++#endif //CONFIG_TDLS
++
++			}
++		}
++		
++	}
++	else
++	{
++
++	}
++
++exit:
++
++_func_exit_;
++
++	return res;
++}
++
++s32 rtw_txframes_pending(_adapter *padapter)
++{
++	struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
++
++	return ((_rtw_queue_empty(&pxmitpriv->be_pending) == _FALSE) || 
++			 (_rtw_queue_empty(&pxmitpriv->bk_pending) == _FALSE) || 
++			 (_rtw_queue_empty(&pxmitpriv->vi_pending) == _FALSE) ||
++			 (_rtw_queue_empty(&pxmitpriv->vo_pending) == _FALSE));
++}
++
++s32 rtw_txframes_sta_ac_pending(_adapter *padapter, struct pkt_attrib *pattrib)
++{	
++	struct sta_info *psta;
++	struct tx_servq *ptxservq;
++	int priority = pattrib->priority;
++
++	if(pattrib->psta)
++	{
++	psta = pattrib->psta;
++	}
++	else
++	{
++		DBG_871X("%s, call rtw_get_stainfo()\n", __func__);
++		psta=rtw_get_stainfo(&padapter->stapriv ,&pattrib->ra[0]);
++	}	
++
++	if(psta==NULL)
++	{
++		DBG_871X("%s, psta==NUL\n", __func__);
++		return 0;
++	}
++
++	if(!(psta->state &_FW_LINKED))
++	{
++		DBG_871X("%s, psta->state(0x%x) != _FW_LINKED\n", __func__, psta->state);
++		return 0;
++	}
++	
++	switch(priority) 
++	{
++			case 1:
++			case 2:
++				ptxservq = &(psta->sta_xmitpriv.bk_q);				
++				break;
++			case 4:
++			case 5:
++				ptxservq = &(psta->sta_xmitpriv.vi_q);				
++				break;
++			case 6:
++			case 7:
++				ptxservq = &(psta->sta_xmitpriv.vo_q);							
++				break;
++			case 0:
++			case 3:
++			default:
++				ptxservq = &(psta->sta_xmitpriv.be_q);							
++			break;
++	
++	}	
++
++	return ptxservq->qcnt;	
++}
++
++#ifdef CONFIG_TDLS
++
++int rtw_build_tdls_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe, u8 action)
++{
++	int res=_SUCCESS;
++
++	switch(action){
++		case TDLS_SETUP_REQUEST:
++			rtw_build_tdls_setup_req_ies(padapter, pxmitframe, pframe);
++			break;
++		case TDLS_SETUP_RESPONSE:
++			rtw_build_tdls_setup_rsp_ies(padapter, pxmitframe, pframe);
++			break;
++		case TDLS_SETUP_CONFIRM:
++			rtw_build_tdls_setup_cfm_ies(padapter, pxmitframe, pframe);
++			break;
++		case TDLS_TEARDOWN:
++			rtw_build_tdls_teardown_ies(padapter, pxmitframe, pframe);
++			break;
++		case TDLS_DISCOVERY_REQUEST:
++			rtw_build_tdls_dis_req_ies(padapter, pxmitframe, pframe);
++			break;			
++		case TDLS_PEER_TRAFFIC_INDICATION:
++			rtw_build_tdls_peer_traffic_indication_ies(padapter, pxmitframe, pframe);
++			break;
++		case TDLS_CHANNEL_SWITCH_REQUEST:
++			rtw_build_tdls_ch_switch_req_ies(padapter, pxmitframe, pframe);
++			break;
++		case TDLS_CHANNEL_SWITCH_RESPONSE:
++			rtw_build_tdls_ch_switch_rsp_ies(padapter, pxmitframe, pframe);
++			break;
++#ifdef CONFIG_WFD			
++		case TUNNELED_PROBE_REQ:
++			rtw_build_tunneled_probe_req_ies(padapter, pxmitframe, pframe);
++			break;
++		case TUNNELED_PROBE_RSP:
++			rtw_build_tunneled_probe_rsp_ies(padapter, pxmitframe, pframe);
++			break;
++#endif //CONFIG_WFD
++		default:
++			res=_FAIL;
++			break;
++	}
++
++	return res;
++}
++
++s32 rtw_make_tdls_wlanhdr (_adapter *padapter , u8 *hdr, struct pkt_attrib *pattrib, u8 action)
++{
++	u16 *qc;
++	struct rtw_ieee80211_hdr *pwlanhdr = (struct rtw_ieee80211_hdr *)hdr;
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	struct qos_priv *pqospriv = &pmlmepriv->qospriv;
++	struct sta_priv 	*pstapriv = &padapter->stapriv;
++	struct sta_info *psta=NULL, *ptdls_sta=NULL;
++	u8 tdls_seq=0, baddr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
++
++	sint res = _SUCCESS;
++	u16 *fctrl = &pwlanhdr->frame_ctl;
++
++_func_enter_;
++
++	_rtw_memset(hdr, 0, WLANHDR_OFFSET);
++
++	SetFrameSubType(fctrl, pattrib->subtype);
++
++	switch(action){
++		case TDLS_SETUP_REQUEST:
++		case TDLS_SETUP_RESPONSE:
++		case TDLS_SETUP_CONFIRM:
++		case TDLS_TEARDOWN:	//directly to peer STA or via AP
++		case TDLS_PEER_TRAFFIC_INDICATION:
++		case TDLS_PEER_PSM_REQUEST:	//directly to peer STA or via AP
++		case TUNNELED_PROBE_REQ:
++		case TUNNELED_PROBE_RSP:		
++			SetToDs(fctrl);							
++			_rtw_memcpy(pwlanhdr->addr1, get_bssid(pmlmepriv), ETH_ALEN);
++			_rtw_memcpy(pwlanhdr->addr2, pattrib->src, ETH_ALEN);
++			_rtw_memcpy(pwlanhdr->addr3, pattrib->dst, ETH_ALEN);
++			break;
++		case TDLS_CHANNEL_SWITCH_REQUEST:
++		case TDLS_CHANNEL_SWITCH_RESPONSE:
++		case TDLS_PEER_PSM_RESPONSE:
++		case TDLS_PEER_TRAFFIC_RESPONSE:
++			_rtw_memcpy(pwlanhdr->addr1, pattrib->dst, ETH_ALEN);
++			_rtw_memcpy(pwlanhdr->addr2, pattrib->src, ETH_ALEN);
++			_rtw_memcpy(pwlanhdr->addr3, get_bssid(pmlmepriv), ETH_ALEN);
++			tdls_seq=1;
++			break;
++		case TDLS_DISCOVERY_REQUEST:	//unicast: directly to peer sta, Bcast: via AP
++			if(_rtw_memcmp(pattrib->dst, baddr, ETH_ALEN) )
++			{
++				SetToDs(fctrl);							
++				_rtw_memcpy(pwlanhdr->addr1, get_bssid(pmlmepriv), ETH_ALEN);
++				_rtw_memcpy(pwlanhdr->addr2, pattrib->src, ETH_ALEN);
++				_rtw_memcpy(pwlanhdr->addr3, pattrib->dst, ETH_ALEN);
++			}
++			else
++			{
++				_rtw_memcpy(pwlanhdr->addr1, pattrib->dst, ETH_ALEN);
++				_rtw_memcpy(pwlanhdr->addr2, pattrib->src, ETH_ALEN);
++				_rtw_memcpy(pwlanhdr->addr3, get_bssid(pmlmepriv), ETH_ALEN);
++				tdls_seq=1;
++			}
++			break;
++	}
++
++	if (pattrib->encrypt)
++		SetPrivacy(fctrl);
++
++	if (pqospriv->qos_option)
++	{
++		qc = (unsigned short *)(hdr + pattrib->hdrlen - 2);
++		if (pattrib->priority)
++			SetPriority(qc, pattrib->priority);
++		SetAckpolicy(qc, pattrib->ack_policy);
++	}
++
++	psta = pattrib->psta;
++ 
++	//  1. update seq_num per link by sta_info
++	//  2. rewrite encrypt to _AES_, also rewrite iv_len, icv_len
++	if(tdls_seq==1){
++		ptdls_sta=rtw_get_stainfo(pstapriv, pattrib->dst);
++		if(ptdls_sta){
++			ptdls_sta->sta_xmitpriv.txseq_tid[pattrib->priority]++;
++			ptdls_sta->sta_xmitpriv.txseq_tid[pattrib->priority] &= 0xFFF;
++			pattrib->seqnum = ptdls_sta->sta_xmitpriv.txseq_tid[pattrib->priority];
++			SetSeqNum(hdr, pattrib->seqnum);
++
++			if (pattrib->encrypt){
++				pattrib->encrypt= _AES_;
++				pattrib->iv_len=8;
++				pattrib->icv_len=8;
++			}
++		}else{
++			res=_FAIL;
++			goto exit;
++		}
++	}else if(psta){
++		psta->sta_xmitpriv.txseq_tid[pattrib->priority]++;
++		psta->sta_xmitpriv.txseq_tid[pattrib->priority] &= 0xFFF;
++		pattrib->seqnum = psta->sta_xmitpriv.txseq_tid[pattrib->priority];
++		SetSeqNum(hdr, pattrib->seqnum);
++	}
++
++
++exit:
++
++_func_exit_;
++
++	return res;
++}
++
++s32 rtw_xmit_tdls_coalesce(_adapter * padapter, struct xmit_frame * pxmitframe, u8 action)
++{
++	s32 llc_sz;
++
++	u8 *pframe, *mem_start;
++
++	struct sta_info		*psta;
++	struct sta_priv		*pstapriv = &padapter->stapriv;
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	struct pkt_attrib	*pattrib = &pxmitframe->attrib;
++	u8 *pbuf_start;
++	s32 bmcst = IS_MCAST(pattrib->ra);
++	s32 res = _SUCCESS;
++	
++_func_enter_;
++
++	if (pattrib->psta) {
++		psta = pattrib->psta;
++	} else {	
++		if(bmcst) {
++			psta = rtw_get_bcmc_stainfo(padapter);
++		} else {
++			psta = rtw_get_stainfo(&padapter->stapriv, pattrib->ra);
++	        }
++	}
++
++	if(psta==NULL)
++		return _FAIL;
++
++	if (pxmitframe->buf_addr == NULL)
++		return _FAIL;
++
++	pbuf_start = pxmitframe->buf_addr;
++	mem_start = pbuf_start + TXDESC_OFFSET;
++
++	if (rtw_make_tdls_wlanhdr(padapter, mem_start, pattrib, action) == _FAIL) {
++		res = _FAIL;
++		goto exit;
++	}
++
++	pframe = mem_start;
++	pframe += pattrib->hdrlen;
++
++	//adding icv, if necessary...
++	if (pattrib->iv_len)
++	{
++		if (psta != NULL)
++		{
++			switch(pattrib->encrypt)
++			{
++				case _WEP40_:
++				case _WEP104_:
++						WEP_IV(pattrib->iv, psta->dot11txpn, pattrib->key_idx);	
++					break;
++				case _TKIP_:			
++					if(bmcst)
++						TKIP_IV(pattrib->iv, psta->dot11txpn, pattrib->key_idx);
++					else
++						TKIP_IV(pattrib->iv, psta->dot11txpn, 0);
++					break;			
++				case _AES_:
++					if(bmcst)
++						AES_IV(pattrib->iv, psta->dot11txpn, pattrib->key_idx);
++					else
++						AES_IV(pattrib->iv, psta->dot11txpn, 0);
++					break;
++			}
++		}
++
++		_rtw_memcpy(pframe, pattrib->iv, pattrib->iv_len);
++		pframe += pattrib->iv_len;
++
++	}
++
++	llc_sz = rtw_put_snap(pframe, pattrib->ether_type);
++	pframe += llc_sz;
++
++	//pattrib->pktlen will be counted in rtw_build_tdls_ies
++	pattrib->pktlen = 0;
++
++	rtw_build_tdls_ies(padapter, pxmitframe, pframe, action);
++
++	if ((pattrib->icv_len >0 )&& (pattrib->bswenc)) {
++		pframe += pattrib->pktlen;
++		_rtw_memcpy(pframe, pattrib->icv, pattrib->icv_len); 
++		pframe += pattrib->icv_len;
++	}
++
++	pattrib->nr_frags = 1;
++	pattrib->last_txcmdsz = pattrib->hdrlen + pattrib->iv_len + llc_sz + 
++			((pattrib->bswenc) ? pattrib->icv_len : 0) + pattrib->pktlen;
++	
++	if (xmitframe_addmic(padapter, pxmitframe) == _FAIL)
++	{
++		goto exit;
++	}
++
++	xmitframe_swencrypt(padapter, pxmitframe);
++	
++	update_attrib_vcs_info(padapter, pxmitframe);
++	
++exit:	
++	
++_func_exit_;	
++
++	return res;
++}
++#endif //CONFIG_TDLS
++
++/*
++ * Calculate wlan 802.11 packet MAX size from pkt_attrib
++ * This function doesn't consider fragment case
++ */
++u32 rtw_calculate_wlan_pkt_size_by_attribue(struct pkt_attrib *pattrib)
++{
++	u32	len = 0;
++
++	len = pattrib->hdrlen + pattrib->iv_len; // WLAN Header and IV
++	len += SNAP_SIZE + sizeof(u16); // LLC
++	len += pattrib->pktlen;
++	if (pattrib->encrypt == _TKIP_) len += 8; // MIC
++	len += pattrib->icv_len; // ICV
++
++	return len;
++}
++
++/*
++
++This sub-routine will perform all the following:
++
++1. remove 802.3 header.
++2. create wlan_header, based on the info in pxmitframe
++3. append sta's iv/ext-iv
++4. append LLC
++5. move frag chunk from pframe to pxmitframe->mem
++6. apply sw-encrypt, if necessary. 
++
++*/
++s32 rtw_xmitframe_coalesce(_adapter *padapter, _pkt *pkt, struct xmit_frame *pxmitframe)
++{
++	struct pkt_file pktfile;
++
++	s32 frg_inx, frg_len, mpdu_len, llc_sz, mem_sz;
++
++	SIZE_PTR addr;
++
++	u8 *pframe, *mem_start;
++
++	struct sta_info		*psta;
++	//struct sta_priv		*pstapriv = &padapter->stapriv;
++	//struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	struct xmit_priv	*pxmitpriv = &padapter->xmitpriv;
++
++	struct pkt_attrib	*pattrib = &pxmitframe->attrib;
++
++	u8 *pbuf_start;
++
++	s32 bmcst = IS_MCAST(pattrib->ra);
++	s32 res = _SUCCESS;
++
++_func_enter_;
++
++	if (pattrib->psta)
++	{
++		psta = pattrib->psta;
++	} else
++	{	
++		DBG_871X("%s, call rtw_get_stainfo()\n", __func__);
++		psta = rtw_get_stainfo(&padapter->stapriv, pattrib->ra);
++	}
++
++	if(psta==NULL)
++        {
++		
++		DBG_871X("%s, psta==NUL\n", __func__);
++		return _FAIL;
++	}
++
++
++	if(!(psta->state &_FW_LINKED))
++	{
++		DBG_871X("%s, psta->state(0x%x) != _FW_LINKED\n", __func__, psta->state);
++		return _FAIL;
++	}
++
++	if (pxmitframe->buf_addr == NULL){
++		DBG_8192C("==> %s buf_addr==NULL \n",__FUNCTION__);
++		return _FAIL;
++	}
++
++	pbuf_start = pxmitframe->buf_addr;
++
++#ifdef CONFIG_USB_TX_AGGREGATION
++	mem_start = pbuf_start + TXDESC_SIZE + (pxmitframe->pkt_offset * PACKET_OFFSET_SZ);
++#else
++	mem_start = pbuf_start + TXDESC_OFFSET;
++#endif
++
++	if (rtw_make_wlanhdr(padapter, mem_start, pattrib) == _FAIL) {
++		RT_TRACE(_module_rtl871x_xmit_c_, _drv_err_, ("rtw_xmitframe_coalesce: rtw_make_wlanhdr fail; drop pkt\n"));
++		res = _FAIL;
++		goto exit;
++	}
++
++	_rtw_open_pktfile(pkt, &pktfile);
++	_rtw_pktfile_read(&pktfile, NULL, pattrib->pkt_hdrlen);
++
++	frg_inx = 0;
++	frg_len = pxmitpriv->frag_len - 4;//2346-4 = 2342
++
++	while (1)
++	{
++		llc_sz = 0;
++
++		mpdu_len = frg_len;
++
++		pframe = mem_start;
++
++		SetMFrag(mem_start);
++
++		pframe += pattrib->hdrlen;
++		mpdu_len -= pattrib->hdrlen;
++
++		//adding icv, if necessary...
++		if (pattrib->iv_len)
++		{
++			//if (check_fwstate(pmlmepriv, WIFI_MP_STATE))
++			//	psta = rtw_get_stainfo(pstapriv, get_bssid(pmlmepriv));
++			//else
++			//	psta = rtw_get_stainfo(pstapriv, pattrib->ra);
++
++			if (psta != NULL)
++			{
++				switch(pattrib->encrypt)
++				{
++					case _WEP40_:
++					case _WEP104_:
++							WEP_IV(pattrib->iv, psta->dot11txpn, pattrib->key_idx);	
++						break;
++					case _TKIP_:			
++						if(bmcst)
++							TKIP_IV(pattrib->iv, psta->dot11txpn, pattrib->key_idx);
++						else
++							TKIP_IV(pattrib->iv, psta->dot11txpn, 0);
++						break;			
++					case _AES_:
++						if(bmcst)
++							AES_IV(pattrib->iv, psta->dot11txpn, pattrib->key_idx);
++						else
++							AES_IV(pattrib->iv, psta->dot11txpn, 0);
++						break;
++				}
++			}
++
++			_rtw_memcpy(pframe, pattrib->iv, pattrib->iv_len);
++
++			RT_TRACE(_module_rtl871x_xmit_c_, _drv_notice_,
++				 ("rtw_xmitframe_coalesce: keyid=%d pattrib->iv[3]=%.2x pframe=%.2x %.2x %.2x %.2x\n",
++				  padapter->securitypriv.dot11PrivacyKeyIndex, pattrib->iv[3], *pframe, *(pframe+1), *(pframe+2), *(pframe+3)));
++
++			pframe += pattrib->iv_len;
++
++			mpdu_len -= pattrib->iv_len;
++		}
++
++		if (frg_inx == 0) {
++			llc_sz = rtw_put_snap(pframe, pattrib->ether_type);
++			pframe += llc_sz;
++			mpdu_len -= llc_sz;
++		}
++
++		if ((pattrib->icv_len >0) && (pattrib->bswenc)) {
++			mpdu_len -= pattrib->icv_len;
++		}
++
++
++		if (bmcst) {
++			// don't do fragment to broadcat/multicast packets
++			mem_sz = _rtw_pktfile_read(&pktfile, pframe, pattrib->pktlen);
++		} else {
++			mem_sz = _rtw_pktfile_read(&pktfile, pframe, mpdu_len);
++		}
++
++		pframe += mem_sz;
++
++		if ((pattrib->icv_len >0 )&& (pattrib->bswenc)) {
++			_rtw_memcpy(pframe, pattrib->icv, pattrib->icv_len); 
++			pframe += pattrib->icv_len;
++		}
++
++		frg_inx++;
++
++		if (bmcst || (rtw_endofpktfile(&pktfile) == _TRUE))
++		{
++			pattrib->nr_frags = frg_inx;
++
++			pattrib->last_txcmdsz = pattrib->hdrlen + pattrib->iv_len + ((pattrib->nr_frags==1)? llc_sz:0) + 
++					((pattrib->bswenc) ? pattrib->icv_len : 0) + mem_sz;
++			
++			ClearMFrag(mem_start);
++
++			break;
++		} else {
++			RT_TRACE(_module_rtl871x_xmit_c_, _drv_err_, ("%s: There're still something in packet!\n", __FUNCTION__));
++		}
++
++		addr = (SIZE_PTR)(pframe);
++		
++		mem_start = (unsigned char *)RND4(addr) + TXDESC_OFFSET;
++		_rtw_memcpy(mem_start, pbuf_start + TXDESC_OFFSET, pattrib->hdrlen);		
++	}
++
++	if (xmitframe_addmic(padapter, pxmitframe) == _FAIL)
++	{
++		RT_TRACE(_module_rtl871x_xmit_c_, _drv_err_, ("xmitframe_addmic(padapter, pxmitframe)==_FAIL\n"));
++		res = _FAIL;
++		goto exit;
++	}
++
++	xmitframe_swencrypt(padapter, pxmitframe);
++
++	if(bmcst == _FALSE)
++		update_attrib_vcs_info(padapter, pxmitframe);
++	else
++		pattrib->vcs_mode = NONE_VCS;
++
++exit:	
++	
++_func_exit_;	
++
++	return res;
++}
++
++#ifdef CONFIG_IEEE80211W
++//broadcast or multicast management pkt use BIP, unicast management pkt use CCMP encryption
++s32 rtw_mgmt_xmitframe_coalesce(_adapter *padapter, _pkt *pkt, struct xmit_frame *pxmitframe)
++{
++	struct pkt_file pktfile;
++	s32 frg_inx, frg_len, mpdu_len, llc_sz, mem_sz;
++	SIZE_PTR addr;
++	u8 *pframe, *mem_start = NULL, *tmp_buf=NULL;
++	u8 hw_hdr_offset, subtype ;
++	struct sta_info		*psta = NULL;
++	struct xmit_priv	*pxmitpriv = &padapter->xmitpriv;
++	struct pkt_attrib	*pattrib = &pxmitframe->attrib;
++	u8 *pbuf_start;
++	s32 bmcst = IS_MCAST(pattrib->ra);
++	s32 res = _FAIL;
++	u8 *BIP_AAD=NULL;
++	u8 *MGMT_body=NULL;
++	
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	u8 MME[_MME_IE_LENGTH_];
++	
++	_irqL irqL;
++	u32	ori_len;
++	mem_start = pframe = (u8 *)(pxmitframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++	
++_func_enter_;
++	ori_len = BIP_AAD_SIZE+pattrib->pktlen;
++	tmp_buf = BIP_AAD = rtw_zmalloc(ori_len);
++	subtype = GetFrameSubType(pframe); //bit(7)~bit(2)
++	
++	if(BIP_AAD == NULL)
++		return _FAIL;
++			
++	_enter_critical_bh(&padapter->security_key_mutex, &irqL);
++	
++	//only support station mode
++	if(!check_fwstate(pmlmepriv, WIFI_STATION_STATE) || !check_fwstate(pmlmepriv, _FW_LINKED))
++		goto xmitframe_coalesce_success;
++	
++	//IGTK key is not install, it may not support 802.11w
++	if(padapter->securitypriv.binstallBIPkey != _TRUE)
++	{
++		DBG_871X("no instll BIP key\n");
++		goto xmitframe_coalesce_success;
++	}
++	//station mode doesn't need TX BIP, just ready the code
++	if(bmcst)
++	{
++		int frame_body_len;
++		u8 mic[16];
++		
++		_rtw_memset(MME, 0, 18);
++				
++		//other types doesn't need the BIP
++		if(GetFrameSubType(pframe) != WIFI_DEAUTH && GetFrameSubType(pframe) != WIFI_DISASSOC)
++			goto xmitframe_coalesce_fail;
++		
++		MGMT_body = pframe + sizeof(struct rtw_ieee80211_hdr_3addr);
++		pframe += pattrib->pktlen;
++		
++		//octent 0 and 1 is key index ,BIP keyid is 4 or 5, LSB only need octent 0
++		MME[0]=padapter->securitypriv.dot11wBIPKeyid;
++		//copy packet number
++		_rtw_memcpy(&MME[2], &pmlmeext->mgnt_80211w_IPN, 6);
++		//increase the packet number
++		pmlmeext->mgnt_80211w_IPN++;
++		
++		//add MME IE with MIC all zero, MME string doesn't include element id and length
++		pframe = rtw_set_ie(pframe, _MME_IE_ , 16 , MME, &(pattrib->pktlen));
++		pattrib->last_txcmdsz = pattrib->pktlen;
++		// total frame length - header length
++		frame_body_len = pattrib->pktlen - sizeof(struct rtw_ieee80211_hdr_3addr);
++		
++		//conscruct AAD, copy frame control field
++		_rtw_memcpy(BIP_AAD, &pwlanhdr->frame_ctl, 2);
++		ClearRetry(BIP_AAD);
++		ClearPwrMgt(BIP_AAD);
++		ClearMData(BIP_AAD);
++		//conscruct AAD, copy address 1 to address 3
++		_rtw_memcpy(BIP_AAD+2, pwlanhdr->addr1, 18);
++		//copy management fram body
++		_rtw_memcpy(BIP_AAD+BIP_AAD_SIZE, MGMT_body, frame_body_len);
++		/*//dump total packet include MME with zero MIC
++		{
++			int i;
++			printk("Total packet: ");
++			for(i=0; i < BIP_AAD_SIZE+frame_body_len; i++)
++				printk(" %02x ", BIP_AAD[i]);
++			printk("\n");
++		}*/
++		//calculate mic
++		if(omac1_aes_128(padapter->securitypriv.dot11wBIPKey[padapter->securitypriv.dot11wBIPKeyid].skey
++			, BIP_AAD, BIP_AAD_SIZE+frame_body_len, mic))
++			goto xmitframe_coalesce_fail;
++		
++		/*//dump calculated mic result
++		{
++			int i;
++			printk("Calculated mic result: ");
++			for(i=0; i<16; i++)
++				printk(" %02x ", mic[i]);
++			printk("\n");
++		}*/
++		//copy right BIP mic value, total is 128bits, we use the 0~63 bits
++		_rtw_memcpy(pframe-8, mic, 8);
++		/*/dump all packet after mic ok
++		{
++			int pp;
++			printk("pattrib->pktlen = %d \n", pattrib->pktlen);
++			for(pp=0;pp< pattrib->pktlen; pp++)
++				printk(" %02x ", mem_start[pp]);
++			printk("\n");
++		}*/
++	}
++	else //unicast mgmt frame TX
++	{
++		//start to encrypt mgmt frame
++		if(subtype == WIFI_DEAUTH || subtype == WIFI_DISASSOC ||
++			subtype == WIFI_REASSOCREQ || subtype == WIFI_ACTION)
++		{
++			if (pattrib->psta)
++				psta = pattrib->psta;
++			else
++			{
++				psta = rtw_get_stainfo(&padapter->stapriv, pattrib->ra);
++			}
++		
++			if(psta==NULL)
++			{
++				
++				DBG_871X("%s, psta==NUL\n", __func__);
++				goto xmitframe_coalesce_fail;
++			}
++		
++			if(!(psta->state & _FW_LINKED) || pxmitframe->buf_addr==NULL)
++			{
++				DBG_871X("%s, not _FW_LINKED or addr null\n", __func__);
++				goto xmitframe_coalesce_fail;
++			}
++			
++			//DBG_871X("%s, action frame category=%d \n", __func__, pframe[WLAN_HDR_A3_LEN]);
++			//according 802.11-2012 standard, these five types are not robust types
++			if(subtype == WIFI_ACTION && 
++			(pframe[WLAN_HDR_A3_LEN] == RTW_WLAN_CATEGORY_PUBLIC ||
++			pframe[WLAN_HDR_A3_LEN] == RTW_WLAN_CATEGORY_HT ||
++			pframe[WLAN_HDR_A3_LEN] == RTW_WLAN_CATEGORY_UNPROTECTED_WNM ||
++			pframe[WLAN_HDR_A3_LEN] == RTW_WLAN_CATEGORY_SELF_PROTECTED  ||
++			pframe[WLAN_HDR_A3_LEN] == RTW_WLAN_CATEGORY_P2P))
++				goto xmitframe_coalesce_fail;
++			//before encrypt dump the management packet content
++			/*{
++				int i;
++				printk("Management pkt: ");
++				for(i=0; i<pattrib->pktlen; i++)
++				printk(" %02x ", pframe[i]);
++				printk("=======\n");
++			}*/
++			if(pattrib->encrypt>0)
++				_rtw_memcpy(pattrib->dot118021x_UncstKey.skey, psta->dot118021x_UncstKey.skey, 16);
++			//bakeup original management packet
++			_rtw_memcpy(tmp_buf, pframe, pattrib->pktlen);
++			//move to data portion
++			pframe += pattrib->hdrlen;
++			
++			//802.11w unicast management packet must be _AES_
++			pattrib->iv_len = 8;
++			//it's MIC of AES
++			pattrib->icv_len = 8;
++			
++			switch(pattrib->encrypt)
++			{
++				case _AES_:
++						//set AES IV header
++						AES_IV(pattrib->iv, psta->dot11wtxpn, 0);
++					break;
++				default:
++					goto xmitframe_coalesce_fail;
++			}
++			//insert iv header into management frame
++			_rtw_memcpy(pframe, pattrib->iv, pattrib->iv_len);
++			pframe += pattrib->iv_len;
++			//copy mgmt data portion after CCMP header
++			_rtw_memcpy(pframe, tmp_buf+pattrib->hdrlen, pattrib->pktlen-pattrib->hdrlen);
++			//move pframe to end of mgmt pkt
++			pframe += pattrib->pktlen-pattrib->hdrlen;
++			//add 8 bytes CCMP IV header to length
++			pattrib->pktlen += pattrib->iv_len;
++			/*//dump management packet include AES IV header
++			{
++				int i;
++				printk("Management pkt + IV: ");
++				//for(i=0; i<pattrib->pktlen; i++)
++				//printk(" %02x ", mem_start[i]);
++				printk("@@@@@@@@@@@@@\n");
++			}*/
++			
++			if ((pattrib->icv_len >0 )&& (pattrib->bswenc)) {
++				_rtw_memcpy(pframe, pattrib->icv, pattrib->icv_len); 
++				pframe += pattrib->icv_len;
++			}
++			//add 8 bytes MIC
++			pattrib->pktlen += pattrib->icv_len;
++			//set final tx command size
++			pattrib->last_txcmdsz = pattrib->pktlen;
++	
++			//set protected bit must be beofre SW encrypt
++			SetPrivacy(mem_start);
++			/*//dump management packet include AES header
++			{
++				int i;
++				printk("prepare to enc Management pkt + IV: ");
++				for(i=0; i<pattrib->pktlen; i++)
++				printk(" %02x ", mem_start[i]);
++				printk("@@@@@@@@@@@@@\n");
++			}*/
++			//software encrypt
++			xmitframe_swencrypt(padapter, pxmitframe);
++		}
++	}
++
++xmitframe_coalesce_success:
++	_exit_critical_bh(&padapter->security_key_mutex, &irqL);
++	rtw_mfree(BIP_AAD, ori_len);
++_func_exit_;
++	return _SUCCESS;
++	
++xmitframe_coalesce_fail:
++	_exit_critical_bh(&padapter->security_key_mutex, &irqL);
++	rtw_mfree(BIP_AAD, ori_len);
++_func_exit_;
++
++	return _FAIL;
++}
++#endif //CONFIG_IEEE80211W
++
++/* Logical Link Control(LLC) SubNetwork Attachment Point(SNAP) header
++ * IEEE LLC/SNAP header contains 8 octets
++ * First 3 octets comprise the LLC portion
++ * SNAP portion, 5 octets, is divided into two fields:
++ *	Organizationally Unique Identifier(OUI), 3 octets,
++ *	type, defined by that organization, 2 octets.
++ */
++s32 rtw_put_snap(u8 *data, u16 h_proto)
++{
++	struct ieee80211_snap_hdr *snap;
++	u8 *oui;
++
++_func_enter_;
++
++	snap = (struct ieee80211_snap_hdr *)data;
++	snap->dsap = 0xaa;
++	snap->ssap = 0xaa;
++	snap->ctrl = 0x03;
++
++	if (h_proto == 0x8137 || h_proto == 0x80f3)
++		oui = P802_1H_OUI;
++	else
++		oui = RFC1042_OUI;
++	
++	snap->oui[0] = oui[0];
++	snap->oui[1] = oui[1];
++	snap->oui[2] = oui[2];
++
++	*(u16 *)(data + SNAP_SIZE) = htons(h_proto);
++
++_func_exit_;
++
++	return SNAP_SIZE + sizeof(u16);
++}
++
++void rtw_update_protection(_adapter *padapter, u8 *ie, uint ie_len)
++{
++
++	uint	protection;
++	u8	*perp;
++	sint	 erp_len;
++	struct	xmit_priv *pxmitpriv = &padapter->xmitpriv;
++	struct	registry_priv *pregistrypriv = &padapter->registrypriv;
++	
++_func_enter_;
++	
++	switch(pxmitpriv->vcs_setting)
++	{
++		case DISABLE_VCS:
++			pxmitpriv->vcs = NONE_VCS;
++			break;
++	
++		case ENABLE_VCS:
++			break;
++	
++		case AUTO_VCS:
++		default:
++			perp = rtw_get_ie(ie, _ERPINFO_IE_, &erp_len, ie_len);
++			if(perp == NULL)
++			{
++				pxmitpriv->vcs = NONE_VCS;
++			}
++			else
++			{
++				protection = (*(perp + 2)) & BIT(1);
++				if (protection)
++				{
++					if(pregistrypriv->vcs_type == RTS_CTS)
++						pxmitpriv->vcs = RTS_CTS;
++					else
++						pxmitpriv->vcs = CTS_TO_SELF;
++				}
++				else
++					pxmitpriv->vcs = NONE_VCS;
++			}
++
++			break;			
++	
++	}
++
++_func_exit_;
++
++}
++
++void rtw_count_tx_stats(_adapter *padapter, struct xmit_frame *pxmitframe, int sz)
++{
++	struct sta_info *psta = NULL;
++	struct stainfo_stats *pstats = NULL;
++	struct xmit_priv	*pxmitpriv = &padapter->xmitpriv;
++	struct mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
++
++	if((pxmitframe->frame_tag&0x0f) == DATA_FRAMETAG)
++	{
++		pxmitpriv->tx_bytes += sz;
++#ifdef CONFIG_USB_TX_AGGREGATION
++		pmlmepriv->LinkDetectInfo.NumTxOkInPeriod += pxmitframe->agg_num;
++#else
++		pmlmepriv->LinkDetectInfo.NumTxOkInPeriod++;
++#endif
++
++		psta = pxmitframe->attrib.psta;
++
++		if(psta)
++		{
++			pstats = &psta->sta_stats;
++#ifdef CONFIG_USB_TX_AGGREGATION
++			pstats->tx_pkts += pxmitframe->agg_num;
++#else
++			pstats->tx_pkts++;
++#endif
++			pstats->tx_bytes += sz;
++		}
++	}
++	
++}
++
++struct xmit_buf *rtw_alloc_xmitbuf_ext(struct xmit_priv *pxmitpriv)
++{
++	_irqL irqL;
++	struct xmit_buf *pxmitbuf =  NULL;
++	_list *plist, *phead;
++	_queue *pfree_queue = &pxmitpriv->free_xmit_extbuf_queue;
++
++_func_enter_;
++
++	_enter_critical(&pfree_queue->lock, &irqL);
++
++	if(_rtw_queue_empty(pfree_queue) == _TRUE) {
++		pxmitbuf = NULL;
++	} else {
++
++		phead = get_list_head(pfree_queue);
++
++		plist = get_next(phead);
++
++		pxmitbuf = LIST_CONTAINOR(plist, struct xmit_buf, list);
++
++		rtw_list_delete(&(pxmitbuf->list));
++	}
++
++	if (pxmitbuf !=  NULL)
++	{
++		pxmitpriv->free_xmit_extbuf_cnt--;
++		#ifdef DBG_XMIT_BUF
++		DBG_871X("DBG_XMIT_BUF ALLOC no=%d,  free_xmit_extbuf_cnt=%d\n",pxmitbuf->no, pxmitpriv->free_xmit_extbuf_cnt);
++		#endif
++		
++	
++		pxmitbuf->priv_data = NULL;
++
++#ifdef CONFIG_SDIO_HCI
++		pxmitbuf->len = 0;
++		pxmitbuf->pdata = pxmitbuf->ptail = pxmitbuf->phead;
++#endif
++#ifdef CONFIG_PCI_HCI
++		pxmitbuf->len = 0;
++#endif
++
++		if (pxmitbuf->sctx) {
++			DBG_871X("%s pxmitbuf->sctx is not NULL\n", __func__);
++			rtw_sctx_done_err(&pxmitbuf->sctx, RTW_SCTX_DONE_BUF_ALLOC);
++		}
++
++	}
++
++	_exit_critical(&pfree_queue->lock, &irqL);
++
++_func_exit_;
++
++	return pxmitbuf;
++}
++
++s32 rtw_free_xmitbuf_ext(struct xmit_priv *pxmitpriv, struct xmit_buf *pxmitbuf)
++{
++	_irqL irqL;
++	_queue *pfree_queue = &pxmitpriv->free_xmit_extbuf_queue;
++
++_func_enter_;
++
++	if(pxmitbuf==NULL)
++	{
++		return _FAIL;
++	}
++
++	_enter_critical(&pfree_queue->lock, &irqL);
++
++	rtw_list_delete(&pxmitbuf->list);
++
++	rtw_list_insert_tail(&(pxmitbuf->list), get_list_head(pfree_queue));
++	pxmitpriv->free_xmit_extbuf_cnt++;
++	#ifdef DBG_XMIT_BUF
++	DBG_871X("DBG_XMIT_BUF FREE no=%d, free_xmit_extbuf_cnt=%d\n",pxmitbuf->no ,pxmitpriv->free_xmit_extbuf_cnt);
++	#endif
++
++	_exit_critical(&pfree_queue->lock, &irqL);
++
++_func_exit_;
++
++	return _SUCCESS;
++} 
++
++struct xmit_buf *rtw_alloc_xmitbuf(struct xmit_priv *pxmitpriv)
++{
++	_irqL irqL;
++	struct xmit_buf *pxmitbuf =  NULL;
++	_list *plist, *phead;
++	_queue *pfree_xmitbuf_queue = &pxmitpriv->free_xmitbuf_queue;
++
++_func_enter_;
++
++	//DBG_871X("+rtw_alloc_xmitbuf\n");
++
++	_enter_critical(&pfree_xmitbuf_queue->lock, &irqL);
++
++	if(_rtw_queue_empty(pfree_xmitbuf_queue) == _TRUE) {
++		pxmitbuf = NULL;
++	} else {
++
++		phead = get_list_head(pfree_xmitbuf_queue);
++
++		plist = get_next(phead);
++
++		pxmitbuf = LIST_CONTAINOR(plist, struct xmit_buf, list);
++
++		rtw_list_delete(&(pxmitbuf->list));
++	}
++
++	if (pxmitbuf !=  NULL)
++	{
++		pxmitpriv->free_xmitbuf_cnt--;
++		#ifdef DBG_XMIT_BUF
++		DBG_871X("DBG_XMIT_BUF ALLOC no=%d,  free_xmitbuf_cnt=%d\n",pxmitbuf->no, pxmitpriv->free_xmitbuf_cnt);
++		#endif
++		//DBG_871X("alloc, free_xmitbuf_cnt=%d\n", pxmitpriv->free_xmitbuf_cnt);
++
++		pxmitbuf->priv_data = NULL;
++
++#ifdef CONFIG_SDIO_HCI
++		pxmitbuf->len = 0;
++		pxmitbuf->pdata = pxmitbuf->ptail = pxmitbuf->phead;
++#endif
++#ifdef CONFIG_PCI_HCI
++		pxmitbuf->len = 0;
++#endif
++
++		if (pxmitbuf->sctx) {
++			DBG_871X("%s pxmitbuf->sctx is not NULL\n", __func__);
++			rtw_sctx_done_err(&pxmitbuf->sctx, RTW_SCTX_DONE_BUF_ALLOC);
++		}
++	}
++	#ifdef DBG_XMIT_BUF
++	else
++	{
++		DBG_871X("DBG_XMIT_BUF rtw_alloc_xmitbuf return NULL\n");
++	}
++	#endif
++
++	_exit_critical(&pfree_xmitbuf_queue->lock, &irqL);
++
++_func_exit_;
++
++	return pxmitbuf;
++}
++
++s32 rtw_free_xmitbuf(struct xmit_priv *pxmitpriv, struct xmit_buf *pxmitbuf)
++{
++	_irqL irqL;
++	_queue *pfree_xmitbuf_queue = &pxmitpriv->free_xmitbuf_queue;
++
++_func_enter_;
++
++	//DBG_871X("+rtw_free_xmitbuf\n");
++
++	if(pxmitbuf==NULL)
++	{
++		return _FAIL;
++	}
++
++	if (pxmitbuf->sctx) {
++		DBG_871X("%s pxmitbuf->sctx is not NULL\n", __func__);
++		rtw_sctx_done_err(&pxmitbuf->sctx, RTW_SCTX_DONE_BUF_FREE);
++	}
++
++	if(pxmitbuf->ext_tag)
++	{
++		rtw_free_xmitbuf_ext(pxmitpriv, pxmitbuf);
++	}
++	else
++	{
++		_enter_critical(&pfree_xmitbuf_queue->lock, &irqL);
++
++		rtw_list_delete(&pxmitbuf->list);	
++
++		rtw_list_insert_tail(&(pxmitbuf->list), get_list_head(pfree_xmitbuf_queue));
++
++		pxmitpriv->free_xmitbuf_cnt++;
++		//DBG_871X("FREE, free_xmitbuf_cnt=%d\n", pxmitpriv->free_xmitbuf_cnt);
++		#ifdef DBG_XMIT_BUF
++		DBG_871X("DBG_XMIT_BUF FREE no=%d, free_xmitbuf_cnt=%d\n",pxmitbuf->no ,pxmitpriv->free_xmitbuf_cnt);
++		#endif
++		_exit_critical(&pfree_xmitbuf_queue->lock, &irqL);
++	}
++
++_func_exit_;	 
++
++	return _SUCCESS;	
++} 
++
++void rtw_init_xmitframe(struct xmit_frame *pxframe)
++{
++	if (pxframe !=  NULL)//default value setting
++	{
++		pxframe->buf_addr = NULL;
++		pxframe->pxmitbuf = NULL;
++
++		_rtw_memset(&pxframe->attrib, 0, sizeof(struct pkt_attrib));
++		//pxframe->attrib.psta = NULL;
++
++		pxframe->frame_tag = DATA_FRAMETAG;
++
++#ifdef CONFIG_USB_HCI
++		pxframe->pkt = NULL;
++		pxframe->pkt_offset = 1;//default use pkt_offset to fill tx desc
++
++#ifdef CONFIG_USB_TX_AGGREGATION
++		pxframe->agg_num = 1;
++#endif
++
++#endif //#ifdef CONFIG_USB_HCI
++
++#if defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI)
++		pxframe->pg_num = 1;
++		pxframe->agg_num = 1;
++#endif
++
++#ifdef CONFIG_XMIT_ACK
++		pxframe->ack_report = 0;
++#endif
++
++	}
++}
++
++/*
++Calling context:
++1. OS_TXENTRY
++2. RXENTRY (rx_thread or RX_ISR/RX_CallBack)
++
++If we turn on USE_RXTHREAD, then, no need for critical section.
++Otherwise, we must use _enter/_exit critical to protect free_xmit_queue...
++
++Must be very very cautious...
++
++*/
++struct xmit_frame *rtw_alloc_xmitframe(struct xmit_priv *pxmitpriv)//(_queue *pfree_xmit_queue)
++{
++	/*
++		Please remember to use all the osdep_service api,
++		and lock/unlock or _enter/_exit critical to protect 
++		pfree_xmit_queue
++	*/
++
++	_irqL irqL;
++	struct xmit_frame *pxframe = NULL;
++	_list *plist, *phead;
++	_queue *pfree_xmit_queue = &pxmitpriv->free_xmit_queue;
++#ifdef PLATFORM_LINUX
++	_adapter *padapter = pxmitpriv->adapter;
++#endif //PLATFORM_LINUX
++
++_func_enter_;
++
++	_enter_critical_bh(&pfree_xmit_queue->lock, &irqL);
++
++	if (_rtw_queue_empty(pfree_xmit_queue) == _TRUE) {
++		RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("rtw_alloc_xmitframe:%d\n", pxmitpriv->free_xmitframe_cnt));
++		pxframe =  NULL;
++	} else {
++		phead = get_list_head(pfree_xmit_queue);
++
++		plist = get_next(phead);
++
++		pxframe = LIST_CONTAINOR(plist, struct xmit_frame, list);
++
++		rtw_list_delete(&(pxframe->list));
++		pxmitpriv->free_xmitframe_cnt--;
++		RT_TRACE(_module_rtl871x_xmit_c_, _drv_info_, ("rtw_alloc_xmitframe():free_xmitframe_cnt=%d\n", pxmitpriv->free_xmitframe_cnt));
++	}
++
++#ifdef PLATFORM_LINUX
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35))
++		if(pxmitpriv->free_xmitframe_cnt==1)
++		{
++			if (!rtw_netif_queue_stopped(padapter->pnetdev))
++				rtw_netif_stop_queue(padapter->pnetdev);
++		}
++#endif
++#endif
++
++	_exit_critical_bh(&pfree_xmit_queue->lock, &irqL);
++
++	rtw_init_xmitframe(pxframe);
++
++_func_exit_;
++
++	return pxframe;
++}
++
++struct xmit_frame *rtw_alloc_xmitframe_ext(struct xmit_priv *pxmitpriv)
++{
++	_irqL irqL;
++	struct xmit_frame *pxframe = NULL;
++	_list *plist, *phead;
++	_queue *queue = &pxmitpriv->free_xframe_ext_queue;
++
++_func_enter_;
++
++	_enter_critical_bh(&queue->lock, &irqL);
++
++	if (_rtw_queue_empty(queue) == _TRUE) {
++		RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("rtw_alloc_xmitframe_ext:%d\n", pxmitpriv->free_xframe_ext_cnt));
++		pxframe =  NULL;
++	} else {
++		phead = get_list_head(queue);
++		plist = get_next(phead);
++		pxframe = LIST_CONTAINOR(plist, struct xmit_frame, list);
++
++		rtw_list_delete(&(pxframe->list));
++		pxmitpriv->free_xframe_ext_cnt--;
++		RT_TRACE(_module_rtl871x_xmit_c_, _drv_info_, ("rtw_alloc_xmitframe_ext():free_xmitframe_cnt=%d\n", pxmitpriv->free_xframe_ext_cnt));
++	}
++
++	_exit_critical_bh(&queue->lock, &irqL);
++
++	rtw_init_xmitframe(pxframe);
++
++_func_exit_;
++
++	return pxframe;
++}
++
++struct xmit_frame *rtw_alloc_xmitframe_once(struct xmit_priv *pxmitpriv)
++{
++	struct xmit_frame *pxframe = NULL;
++	u8 *alloc_addr;
++
++	alloc_addr = rtw_zmalloc(sizeof(struct xmit_frame) + 4);
++	
++	if (alloc_addr == NULL)
++		goto exit;
++		
++	pxframe = (struct xmit_frame *)N_BYTE_ALIGMENT((SIZE_PTR)(alloc_addr), 4);
++	pxframe->alloc_addr = alloc_addr;
++
++	pxframe->padapter = pxmitpriv->adapter;
++	pxframe->frame_tag = NULL_FRAMETAG;
++
++	pxframe->pkt = NULL;
++
++	pxframe->buf_addr = NULL;
++	pxframe->pxmitbuf = NULL;
++
++	rtw_init_xmitframe(pxframe);
++
++	DBG_871X("################## %s ##################\n", __func__);
++
++exit:
++	return pxframe;
++}
++
++s32 rtw_free_xmitframe(struct xmit_priv *pxmitpriv, struct xmit_frame *pxmitframe)
++{	
++	_irqL irqL;
++	_queue *queue;
++	_adapter *padapter = pxmitpriv->adapter;
++	_pkt *pndis_pkt = NULL;
++
++_func_enter_;	
++
++	if (pxmitframe == NULL) {
++		RT_TRACE(_module_rtl871x_xmit_c_, _drv_err_, ("======rtw_free_xmitframe():pxmitframe==NULL!!!!!!!!!!\n"));
++		goto exit;
++	}
++
++	if (pxmitframe->pkt){
++		pndis_pkt = pxmitframe->pkt;
++		pxmitframe->pkt = NULL;
++	}
++
++	if (pxmitframe->alloc_addr) {
++		DBG_871X("################## %s with alloc_addr ##################\n", __func__);
++		rtw_mfree(pxmitframe->alloc_addr, sizeof(struct xmit_frame) + 4);
++		goto check_pkt_complete;
++	}
++
++	if (pxmitframe->ext_tag == 0)
++		queue = &pxmitpriv->free_xmit_queue;
++	else if(pxmitframe->ext_tag == 1)
++		queue = &pxmitpriv->free_xframe_ext_queue;
++	else
++	{}
++
++	_enter_critical_bh(&queue->lock, &irqL);
++
++	rtw_list_delete(&pxmitframe->list);	
++	rtw_list_insert_tail(&pxmitframe->list, get_list_head(queue));
++	if (pxmitframe->ext_tag == 0) {
++		pxmitpriv->free_xmitframe_cnt++;
++		RT_TRACE(_module_rtl871x_xmit_c_, _drv_debug_, ("rtw_free_xmitframe():free_xmitframe_cnt=%d\n", pxmitpriv->free_xmitframe_cnt));
++	} else if(pxmitframe->ext_tag == 1) {
++		pxmitpriv->free_xframe_ext_cnt++;
++		RT_TRACE(_module_rtl871x_xmit_c_, _drv_debug_, ("rtw_free_xmitframe():free_xframe_ext_cnt=%d\n", pxmitpriv->free_xframe_ext_cnt));
++	} else {
++	}
++
++	_exit_critical_bh(&queue->lock, &irqL);
++
++check_pkt_complete:
++
++	if(pndis_pkt)
++		rtw_os_pkt_complete(padapter, pndis_pkt);
++
++exit:
++
++_func_exit_;
++
++	return _SUCCESS;
++}
++
++void rtw_free_xmitframe_queue(struct xmit_priv *pxmitpriv, _queue *pframequeue)
++{
++	_irqL irqL;
++	_list	*plist, *phead;
++	struct	xmit_frame 	*pxmitframe;
++
++_func_enter_;	
++
++	_enter_critical_bh(&(pframequeue->lock), &irqL);
++
++	phead = get_list_head(pframequeue);
++	plist = get_next(phead);
++	
++	while (rtw_end_of_queue_search(phead, plist) == _FALSE)
++	{
++			
++		pxmitframe = LIST_CONTAINOR(plist, struct xmit_frame, list);
++
++		plist = get_next(plist); 
++		
++		rtw_free_xmitframe(pxmitpriv,pxmitframe);
++			
++	}
++	_exit_critical_bh(&(pframequeue->lock), &irqL);
++
++_func_exit_;
++}
++
++s32 rtw_xmitframe_enqueue(_adapter *padapter, struct xmit_frame *pxmitframe)
++{
++	if (rtw_xmit_classifier(padapter, pxmitframe) == _FAIL)
++	{
++		RT_TRACE(_module_rtl871x_xmit_c_, _drv_err_,
++			 ("rtw_xmitframe_enqueue: drop xmit pkt for classifier fail\n"));
++//		pxmitframe->pkt = NULL;
++		return _FAIL;
++	}
++
++	return _SUCCESS;
++}
++
++static struct xmit_frame *dequeue_one_xmitframe(struct xmit_priv *pxmitpriv, struct hw_xmit *phwxmit, struct tx_servq *ptxservq, _queue *pframe_queue)
++{
++	_list	*xmitframe_plist, *xmitframe_phead;
++	struct	xmit_frame	*pxmitframe=NULL;
++
++	xmitframe_phead = get_list_head(pframe_queue);
++	xmitframe_plist = get_next(xmitframe_phead);
++
++	while ((rtw_end_of_queue_search(xmitframe_phead, xmitframe_plist)) == _FALSE)
++	{
++		pxmitframe = LIST_CONTAINOR(xmitframe_plist, struct xmit_frame, list);
++
++		xmitframe_plist = get_next(xmitframe_plist);
++
++/*#ifdef RTK_DMP_PLATFORM
++#ifdef CONFIG_USB_TX_AGGREGATION
++		if((ptxservq->qcnt>0) && (ptxservq->qcnt<=2))
++		{
++			pxmitframe = NULL;
++
++			tasklet_schedule(&pxmitpriv->xmit_tasklet);
++
++			break;
++		}
++#endif
++#endif*/
++		rtw_list_delete(&pxmitframe->list);
++
++		ptxservq->qcnt--;
++
++			break;
++
++		pxmitframe = NULL;
++
++	}
++
++	return pxmitframe;
++}
++
++struct xmit_frame* rtw_dequeue_xframe(struct xmit_priv *pxmitpriv, struct hw_xmit *phwxmit_i, sint entry)
++{
++	_irqL irqL0;
++	_list *sta_plist, *sta_phead;
++	struct hw_xmit *phwxmit;
++	struct tx_servq *ptxservq = NULL;
++	_queue *pframe_queue = NULL;
++	struct xmit_frame *pxmitframe = NULL;
++	_adapter *padapter = pxmitpriv->adapter;
++	struct registry_priv	*pregpriv = &padapter->registrypriv;
++	int i, inx[4];
++#ifdef CONFIG_USB_HCI
++//	int j, tmp, acirp_cnt[4];
++#endif
++
++_func_enter_;
++
++	inx[0] = 0; inx[1] = 1; inx[2] = 2; inx[3] = 3;
++
++	if(pregpriv->wifi_spec==1)
++	{
++		int j, tmp, acirp_cnt[4];
++#if 0
++		if(flags<XMIT_QUEUE_ENTRY)
++		{
++			//priority exchange according to the completed xmitbuf flags.
++			inx[flags] = 0;
++			inx[0] = flags;
++		}
++#endif	
++	
++#ifdef CONFIG_USB_HCI
++		//entry indx: 0->vo, 1->vi, 2->be, 3->bk.
++		acirp_cnt[0] = pxmitpriv->voq_cnt;
++		acirp_cnt[1] = pxmitpriv->viq_cnt;
++		acirp_cnt[2] = pxmitpriv->beq_cnt;
++		acirp_cnt[3] = pxmitpriv->bkq_cnt;
++
++		for(i=0; i<4; i++)
++		{
++			for(j=i+1; j<4; j++)
++			{
++				if(acirp_cnt[j]<acirp_cnt[i])
++				{
++					tmp = acirp_cnt[i];
++					acirp_cnt[i] = acirp_cnt[j];
++					acirp_cnt[j] = tmp;
++
++					tmp = inx[i];
++					inx[i] = inx[j];
++					inx[j] = tmp;
++				}
++			}
++		}
++#endif
++	}
++
++	_enter_critical_bh(&pxmitpriv->lock, &irqL0);
++
++	for(i = 0; i < entry; i++) 
++	{
++		phwxmit = phwxmit_i + inx[i];
++
++		//_enter_critical_ex(&phwxmit->sta_queue->lock, &irqL0);
++
++		sta_phead = get_list_head(phwxmit->sta_queue);
++		sta_plist = get_next(sta_phead);
++
++		while ((rtw_end_of_queue_search(sta_phead, sta_plist)) == _FALSE)
++		{
++
++			ptxservq= LIST_CONTAINOR(sta_plist, struct tx_servq, tx_pending);
++
++			pframe_queue = &ptxservq->sta_pending;
++
++			pxmitframe = dequeue_one_xmitframe(pxmitpriv, phwxmit, ptxservq, pframe_queue);
++
++			if(pxmitframe)
++			{
++				phwxmit->accnt--;
++
++				//Remove sta node when there is no pending packets.
++				if(_rtw_queue_empty(pframe_queue)) //must be done after get_next and before break
++					rtw_list_delete(&ptxservq->tx_pending);
++
++				//_exit_critical_ex(&phwxmit->sta_queue->lock, &irqL0);
++
++				goto exit;
++			}
++
++			sta_plist = get_next(sta_plist);
++
++		}
++
++		//_exit_critical_ex(&phwxmit->sta_queue->lock, &irqL0);
++
++	}
++
++exit:
++
++	_exit_critical_bh(&pxmitpriv->lock, &irqL0);
++
++_func_exit_;
++
++	return pxmitframe;
++}
++
++#if 1
++struct tx_servq *rtw_get_sta_pending(_adapter *padapter, struct sta_info *psta, sint up, u8 *ac)
++{
++	struct tx_servq *ptxservq=NULL;
++	
++_func_enter_;	
++
++	switch (up) 
++	{
++		case 1:
++		case 2:
++			ptxservq = &(psta->sta_xmitpriv.bk_q);
++			*(ac) = 3;
++			RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("rtw_get_sta_pending : BK \n"));
++			break;
++
++		case 4:
++		case 5:
++			ptxservq = &(psta->sta_xmitpriv.vi_q);
++			*(ac) = 1;
++			RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("rtw_get_sta_pending : VI\n"));
++			break;
++
++		case 6:
++		case 7:
++			ptxservq = &(psta->sta_xmitpriv.vo_q);
++			*(ac) = 0;
++			RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("rtw_get_sta_pending : VO \n"));			
++			break;
++
++		case 0:
++		case 3:
++		default:
++			ptxservq = &(psta->sta_xmitpriv.be_q);
++			*(ac) = 2;
++			RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("rtw_get_sta_pending : BE \n"));				
++		break;
++		
++	}
++
++_func_exit_;
++
++	return ptxservq;			
++}
++#else
++__inline static struct tx_servq *rtw_get_sta_pending
++	(_adapter *padapter, _queue **ppstapending, struct sta_info *psta, sint up)
++{
++	struct tx_servq *ptxservq;
++	struct hw_xmit *phwxmits =  padapter->xmitpriv.hwxmits;
++	
++_func_enter_;	
++
++#ifdef CONFIG_RTL8711
++
++	if(IS_MCAST(psta->hwaddr))
++	{
++		ptxservq = &(psta->sta_xmitpriv.be_q); // we will use be_q to queue bc/mc frames in BCMC_stainfo
++		*ppstapending = &padapter->xmitpriv.bm_pending; 
++	}
++	else
++#endif		
++	{
++		switch (up) 
++		{
++			case 1:
++			case 2:
++				ptxservq = &(psta->sta_xmitpriv.bk_q);
++				*ppstapending = &padapter->xmitpriv.bk_pending;
++				(phwxmits+3)->accnt++;
++				RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("rtw_get_sta_pending : BK \n"));
++				break;
++
++			case 4:
++			case 5:
++				ptxservq = &(psta->sta_xmitpriv.vi_q);
++				*ppstapending = &padapter->xmitpriv.vi_pending;
++				(phwxmits+1)->accnt++;
++				RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("rtw_get_sta_pending : VI\n"));
++				break;
++
++			case 6:
++			case 7:
++				ptxservq = &(psta->sta_xmitpriv.vo_q);
++				*ppstapending = &padapter->xmitpriv.vo_pending;
++				(phwxmits+0)->accnt++;
++				RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("rtw_get_sta_pending : VO \n"));			
++				break;
++
++			case 0:
++			case 3:
++			default:
++				ptxservq = &(psta->sta_xmitpriv.be_q);
++				*ppstapending = &padapter->xmitpriv.be_pending;
++				(phwxmits+2)->accnt++;
++				RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("rtw_get_sta_pending : BE \n"));				
++			break;
++			
++		}
++
++	}
++
++_func_exit_;
++
++	return ptxservq;			
++}
++#endif
++
++/*
++ * Will enqueue pxmitframe to the proper queue,
++ * and indicate it to xx_pending list.....
++ */
++s32 rtw_xmit_classifier(_adapter *padapter, struct xmit_frame *pxmitframe)
++{
++	//_irqL irqL0;
++	u8	ac_index;
++	struct sta_info	*psta;
++	struct tx_servq	*ptxservq;
++	struct pkt_attrib	*pattrib = &pxmitframe->attrib;
++	struct sta_priv	*pstapriv = &padapter->stapriv;
++	struct hw_xmit	*phwxmits =  padapter->xmitpriv.hwxmits;
++	sint res = _SUCCESS;
++
++_func_enter_;
++
++	if (pattrib->psta) {
++		psta = pattrib->psta;		
++	} else {
++		DBG_871X("%s, call rtw_get_stainfo()\n", __func__);
++		psta = rtw_get_stainfo(pstapriv, pattrib->ra);
++	}
++
++	if (psta == NULL) {
++		res = _FAIL;
++		DBG_8192C("rtw_xmit_classifier: psta == NULL\n");
++		RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("rtw_xmit_classifier: psta == NULL\n"));
++		goto exit;
++	}
++
++	if(!(psta->state &_FW_LINKED))
++	{
++		DBG_871X("%s, psta->state(0x%x) != _FW_LINKED\n", __func__, psta->state);
++		return _FAIL;
++	}
++
++	ptxservq = rtw_get_sta_pending(padapter, psta, pattrib->priority, (u8 *)(&ac_index));
++
++	//_enter_critical(&pstapending->lock, &irqL0);
++
++	if (rtw_is_list_empty(&ptxservq->tx_pending)) {
++		rtw_list_insert_tail(&ptxservq->tx_pending, get_list_head(phwxmits[ac_index].sta_queue));
++	}
++
++	//_enter_critical(&ptxservq->sta_pending.lock, &irqL1);
++
++	rtw_list_insert_tail(&pxmitframe->list, get_list_head(&ptxservq->sta_pending));
++	ptxservq->qcnt++;
++	phwxmits[ac_index].accnt++;
++
++	//_exit_critical(&ptxservq->sta_pending.lock, &irqL1);
++
++	//_exit_critical(&pstapending->lock, &irqL0);
++
++exit:
++
++_func_exit_;
++
++	return res;
++}
++
++void rtw_alloc_hwxmits(_adapter *padapter)
++{
++	struct hw_xmit *hwxmits;
++	struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
++
++	pxmitpriv->hwxmit_entry = HWXMIT_ENTRY;
++
++	pxmitpriv->hwxmits = (struct hw_xmit *)rtw_zmalloc(sizeof (struct hw_xmit) * pxmitpriv->hwxmit_entry);	
++	
++	hwxmits = pxmitpriv->hwxmits;
++
++	if(pxmitpriv->hwxmit_entry == 5)
++	{
++		//pxmitpriv->bmc_txqueue.head = 0;
++		//hwxmits[0] .phwtxqueue = &pxmitpriv->bmc_txqueue;
++		hwxmits[0] .sta_queue = &pxmitpriv->bm_pending;
++	
++		//pxmitpriv->vo_txqueue.head = 0;
++		//hwxmits[1] .phwtxqueue = &pxmitpriv->vo_txqueue;
++		hwxmits[1] .sta_queue = &pxmitpriv->vo_pending;
++
++		//pxmitpriv->vi_txqueue.head = 0;
++		//hwxmits[2] .phwtxqueue = &pxmitpriv->vi_txqueue;
++		hwxmits[2] .sta_queue = &pxmitpriv->vi_pending;
++	
++		//pxmitpriv->bk_txqueue.head = 0;
++		//hwxmits[3] .phwtxqueue = &pxmitpriv->bk_txqueue;
++		hwxmits[3] .sta_queue = &pxmitpriv->bk_pending;
++
++      		//pxmitpriv->be_txqueue.head = 0;
++		//hwxmits[4] .phwtxqueue = &pxmitpriv->be_txqueue;
++		hwxmits[4] .sta_queue = &pxmitpriv->be_pending;
++		
++	}	
++	else if(pxmitpriv->hwxmit_entry == 4)
++	{
++
++		//pxmitpriv->vo_txqueue.head = 0;
++		//hwxmits[0] .phwtxqueue = &pxmitpriv->vo_txqueue;
++		hwxmits[0] .sta_queue = &pxmitpriv->vo_pending;
++
++		//pxmitpriv->vi_txqueue.head = 0;
++		//hwxmits[1] .phwtxqueue = &pxmitpriv->vi_txqueue;
++		hwxmits[1] .sta_queue = &pxmitpriv->vi_pending;
++
++		//pxmitpriv->be_txqueue.head = 0;
++		//hwxmits[2] .phwtxqueue = &pxmitpriv->be_txqueue;
++		hwxmits[2] .sta_queue = &pxmitpriv->be_pending;
++	
++		//pxmitpriv->bk_txqueue.head = 0;
++		//hwxmits[3] .phwtxqueue = &pxmitpriv->bk_txqueue;
++		hwxmits[3] .sta_queue = &pxmitpriv->bk_pending;
++	}
++	else
++	{
++		
++
++	}
++	
++
++}
++
++void rtw_free_hwxmits(_adapter *padapter)
++{
++	struct hw_xmit *hwxmits;
++	struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
++
++	hwxmits = pxmitpriv->hwxmits;
++	if(hwxmits)
++		rtw_mfree((u8 *)hwxmits, (sizeof (struct hw_xmit) * pxmitpriv->hwxmit_entry));
++}
++
++void rtw_init_hwxmits(struct hw_xmit *phwxmit, sint entry)
++{
++	sint i;
++_func_enter_;	
++	for(i = 0; i < entry; i++, phwxmit++)
++	{
++		//_rtw_spinlock_init(&phwxmit->xmit_lock);
++		//_rtw_init_listhead(&phwxmit->pending);		
++		//phwxmit->txcmdcnt = 0;
++		phwxmit->accnt = 0;
++	}
++_func_exit_;	
++}
++
++#ifdef CONFIG_BR_EXT
++int rtw_br_client_tx(_adapter *padapter, struct sk_buff **pskb)
++{
++	struct sk_buff *skb = *pskb;
++	struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
++	_irqL irqL;
++	//if(check_fwstate(pmlmepriv, WIFI_STATION_STATE|WIFI_ADHOC_STATE) == _TRUE)
++	{
++		void dhcp_flag_bcast(_adapter *priv, struct sk_buff *skb);
++		int res, is_vlan_tag=0, i, do_nat25=1;
++		unsigned short vlan_hdr=0;
++		void *br_port = NULL;
++
++		//mac_clone_handle_frame(priv, skb);
++
++#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35))
++		br_port = padapter->pnetdev->br_port;
++#else   // (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35))
++		rcu_read_lock();
++		br_port = rcu_dereference(padapter->pnetdev->rx_handler_data);
++		rcu_read_unlock();
++#endif  // (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35))
++		_enter_critical_bh(&padapter->br_ext_lock, &irqL);
++		if (	!(skb->data[0] & 1) &&
++				br_port &&
++				memcmp(skb->data+MACADDRLEN, padapter->br_mac, MACADDRLEN) &&
++				*((unsigned short *)(skb->data+MACADDRLEN*2)) != __constant_htons(ETH_P_8021Q) &&
++				*((unsigned short *)(skb->data+MACADDRLEN*2)) == __constant_htons(ETH_P_IP) &&
++				!memcmp(padapter->scdb_mac, skb->data+MACADDRLEN, MACADDRLEN) && padapter->scdb_entry) {
++			memcpy(skb->data+MACADDRLEN, GET_MY_HWADDR(padapter), MACADDRLEN);
++			padapter->scdb_entry->ageing_timer = jiffies;
++			_exit_critical_bh(&padapter->br_ext_lock, &irqL);
++		}
++		else
++		//if (!priv->pmib->ethBrExtInfo.nat25_disable) 		
++		{
++//			if (priv->dev->br_port &&
++//				 !memcmp(skb->data+MACADDRLEN, priv->br_mac, MACADDRLEN)) {
++#if 1
++			if (*((unsigned short *)(skb->data+MACADDRLEN*2)) == __constant_htons(ETH_P_8021Q)) {
++				is_vlan_tag = 1;
++				vlan_hdr = *((unsigned short *)(skb->data+MACADDRLEN*2+2));
++				for (i=0; i<6; i++)
++					*((unsigned short *)(skb->data+MACADDRLEN*2+2-i*2)) = *((unsigned short *)(skb->data+MACADDRLEN*2-2-i*2));
++				skb_pull(skb, 4);
++			}
++			//if SA == br_mac && skb== IP  => copy SIP to br_ip ?? why
++			if (!memcmp(skb->data+MACADDRLEN, padapter->br_mac, MACADDRLEN) &&
++				(*((unsigned short *)(skb->data+MACADDRLEN*2)) == __constant_htons(ETH_P_IP)))
++				memcpy(padapter->br_ip, skb->data+WLAN_ETHHDR_LEN+12, 4);
++
++			if (*((unsigned short *)(skb->data+MACADDRLEN*2)) == __constant_htons(ETH_P_IP)) {
++				if (memcmp(padapter->scdb_mac, skb->data+MACADDRLEN, MACADDRLEN)) {
++					void *scdb_findEntry(_adapter *priv, unsigned char *macAddr, unsigned char *ipAddr);
++					
++					if ((padapter->scdb_entry = (struct nat25_network_db_entry *)scdb_findEntry(padapter,
++								skb->data+MACADDRLEN, skb->data+WLAN_ETHHDR_LEN+12)) != NULL) {
++						memcpy(padapter->scdb_mac, skb->data+MACADDRLEN, MACADDRLEN);
++						memcpy(padapter->scdb_ip, skb->data+WLAN_ETHHDR_LEN+12, 4);
++						padapter->scdb_entry->ageing_timer = jiffies;
++						do_nat25 = 0;
++					}
++				}
++				else {
++					if (padapter->scdb_entry) {
++						padapter->scdb_entry->ageing_timer = jiffies;
++						do_nat25 = 0;
++					}
++					else {
++						memset(padapter->scdb_mac, 0, MACADDRLEN);
++						memset(padapter->scdb_ip, 0, 4);
++					}
++				}
++			}
++			_exit_critical_bh(&padapter->br_ext_lock, &irqL);
++#endif // 1
++			if (do_nat25)
++			{
++				int nat25_db_handle(_adapter *priv, struct sk_buff *skb, int method);
++				if (nat25_db_handle(padapter, skb, NAT25_CHECK) == 0) {
++					struct sk_buff *newskb;
++
++					if (is_vlan_tag) {
++						skb_push(skb, 4);
++						for (i=0; i<6; i++)
++							*((unsigned short *)(skb->data+i*2)) = *((unsigned short *)(skb->data+4+i*2));
++						*((unsigned short *)(skb->data+MACADDRLEN*2)) = __constant_htons(ETH_P_8021Q);
++						*((unsigned short *)(skb->data+MACADDRLEN*2+2)) = vlan_hdr;
++					}
++
++					newskb = rtw_skb_copy(skb);
++					if (newskb == NULL) {
++						//priv->ext_stats.tx_drops++;
++						DEBUG_ERR("TX DROP: rtw_skb_copy fail!\n");
++						//goto stop_proc;
++						return -1;
++					}
++					rtw_skb_free(skb);
++
++					*pskb = skb = newskb;
++					if (is_vlan_tag) {
++						vlan_hdr = *((unsigned short *)(skb->data+MACADDRLEN*2+2));
++						for (i=0; i<6; i++)
++							*((unsigned short *)(skb->data+MACADDRLEN*2+2-i*2)) = *((unsigned short *)(skb->data+MACADDRLEN*2-2-i*2));
++						skb_pull(skb, 4);
++					}
++				}
++
++				if (skb_is_nonlinear(skb))
++					DEBUG_ERR("%s(): skb_is_nonlinear!!\n", __FUNCTION__);
++					
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 18))
++				res = skb_linearize(skb, GFP_ATOMIC);
++#else	// (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 18))
++				res = skb_linearize(skb);
++#endif	// (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 18))
++				if (res < 0) {				
++						DEBUG_ERR("TX DROP: skb_linearize fail!\n");
++						//goto free_and_stop;
++						return -1;
++				}
++				
++				res = nat25_db_handle(padapter, skb, NAT25_INSERT);
++				if (res < 0) {
++					if (res == -2) {
++						//priv->ext_stats.tx_drops++;
++						DEBUG_ERR("TX DROP: nat25_db_handle fail!\n");
++						//goto free_and_stop;
++						return -1;
++
++					}
++					// we just print warning message and let it go
++					//DEBUG_WARN("%s()-%d: nat25_db_handle INSERT Warning!\n", __FUNCTION__, __LINE__);
++					//return -1; // return -1 will cause system crash on 2011/08/30!
++					return 0;
++				}
++			}
++
++			memcpy(skb->data+MACADDRLEN, GET_MY_HWADDR(padapter), MACADDRLEN);
++
++			dhcp_flag_bcast(padapter, skb);
++
++			if (is_vlan_tag) {
++				skb_push(skb, 4);
++				for (i=0; i<6; i++)
++					*((unsigned short *)(skb->data+i*2)) = *((unsigned short *)(skb->data+4+i*2));
++				*((unsigned short *)(skb->data+MACADDRLEN*2)) = __constant_htons(ETH_P_8021Q);
++				*((unsigned short *)(skb->data+MACADDRLEN*2+2)) = vlan_hdr;
++			}
++		}
++#if 0		
++		else{
++			if (*((unsigned short *)(skb->data+MACADDRLEN*2)) == __constant_htons(ETH_P_8021Q)) {
++				is_vlan_tag = 1;
++			}
++				
++			if(is_vlan_tag){
++				if(ICMPV6_MCAST_MAC(skb->data) && ICMPV6_PROTO1A_VALN(skb->data)){
++                                        memcpy(skb->data+MACADDRLEN, GET_MY_HWADDR(padapter), MACADDRLEN);
++				}
++			}else
++			{
++				if(ICMPV6_MCAST_MAC(skb->data) && ICMPV6_PROTO1A(skb->data)){
++                                        memcpy(skb->data+MACADDRLEN, GET_MY_HWADDR(padapter), MACADDRLEN);
++				}
++			}	
++		}
++#endif	// 0
++
++		// check if SA is equal to our MAC
++		if (memcmp(skb->data+MACADDRLEN, GET_MY_HWADDR(padapter), MACADDRLEN)) {
++			//priv->ext_stats.tx_drops++;
++			DEBUG_ERR("TX DROP: untransformed frame SA:%02X%02X%02X%02X%02X%02X!\n",
++				skb->data[6],skb->data[7],skb->data[8],skb->data[9],skb->data[10],skb->data[11]);
++			//goto free_and_stop;
++			return -1;
++		}
++	}
++	return 0;
++}
++#endif	// CONFIG_BR_EXT
++
++static void do_queue_select(_adapter	*padapter, struct pkt_attrib *pattrib)
++{
++	u8 qsel;
++		
++	qsel = pattrib->priority;
++	RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("### do_queue_select priority=%d ,qsel = %d\n",pattrib->priority ,qsel));
++
++#ifdef CONFIG_CONCURRENT_MODE	
++//	if (check_fwstate(&padapter->mlmepriv, WIFI_AP_STATE) == _TRUE)
++//		qsel = 7;//
++#endif
++	
++	pattrib->qsel = qsel;
++}
++
++/*
++ * The main transmit(tx) entry
++ *
++ * Return
++ *	1	enqueue
++ *	0	success, hardware will handle this xmit frame(packet)
++ *	<0	fail
++ */
++s32 rtw_xmit(_adapter *padapter, _pkt **ppkt)
++{
++	static u32 start = 0;
++	static u32 drop_cnt = 0;
++#ifdef CONFIG_AP_MODE
++	_irqL irqL0;
++#endif
++	struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
++	struct xmit_frame *pxmitframe = NULL;
++#ifdef CONFIG_BR_EXT
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	void *br_port = NULL;
++#endif	// CONFIG_BR_EXT
++
++	s32 res;
++
++	if (start == 0)
++		start = rtw_get_current_time();
++
++	pxmitframe = rtw_alloc_xmitframe(pxmitpriv);
++
++	if (rtw_get_passing_time_ms(start) > 2000) {
++		if (drop_cnt)
++			DBG_871X("DBG_TX_DROP_FRAME %s no more pxmitframe, drop_cnt:%u\n", __FUNCTION__, drop_cnt);
++		start = rtw_get_current_time();
++		drop_cnt = 0;
++	}
++
++	if (pxmitframe == NULL) {
++		drop_cnt ++;
++		RT_TRACE(_module_xmit_osdep_c_, _drv_err_, ("rtw_xmit: no more pxmitframe\n"));
++		return -1;
++	}
++
++#ifdef CONFIG_BR_EXT
++
++#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35))
++	br_port = padapter->pnetdev->br_port;
++#else   // (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35))
++	rcu_read_lock();
++	br_port = rcu_dereference(padapter->pnetdev->rx_handler_data);
++	rcu_read_unlock();
++#endif  // (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35))
++
++	if( br_port	&& check_fwstate(pmlmepriv, WIFI_STATION_STATE|WIFI_ADHOC_STATE) == _TRUE)
++	{
++		res = rtw_br_client_tx(padapter, ppkt);
++		if (res == -1)
++		{
++			rtw_free_xmitframe(pxmitpriv, pxmitframe);
++			return -1;
++		}
++	}	
++
++#endif	// CONFIG_BR_EXT
++
++	res = update_attrib(padapter, *ppkt, &pxmitframe->attrib);
++	if (res == _FAIL) {
++		RT_TRACE(_module_xmit_osdep_c_, _drv_err_, ("rtw_xmit: update attrib fail\n"));
++		#ifdef DBG_TX_DROP_FRAME
++		DBG_871X("DBG_TX_DROP_FRAME %s update attrib fail\n", __FUNCTION__);
++		#endif
++		rtw_free_xmitframe(pxmitpriv, pxmitframe);
++		return -1;
++	}
++	pxmitframe->pkt = *ppkt;
++
++	rtw_led_control(padapter, LED_CTL_TX);
++
++	do_queue_select(padapter, &pxmitframe->attrib);
++
++#if defined(CONFIG_AP_MODE) || defined(CONFIG_TDLS)
++	_enter_critical_bh(&pxmitpriv->lock, &irqL0);
++	if(xmitframe_enqueue_for_sleeping_sta(padapter, pxmitframe) == _TRUE)
++	{
++		_exit_critical_bh(&pxmitpriv->lock, &irqL0);
++		return 1;		
++	}
++	_exit_critical_bh(&pxmitpriv->lock, &irqL0);
++#endif
++
++	if (rtw_hal_xmit(padapter, pxmitframe) == _FALSE)
++		return 1;
++
++	return 0;
++}
++
++#ifdef CONFIG_TDLS
++sint xmitframe_enqueue_for_tdls_sleeping_sta(_adapter *padapter, struct xmit_frame *pxmitframe)
++{
++	sint ret=_FALSE;
++
++	_irqL irqL;
++	struct sta_info *ptdls_sta=NULL;
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	struct pkt_attrib *pattrib = &pxmitframe->attrib;
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	int i;
++	
++	ptdls_sta=rtw_get_stainfo(pstapriv, pattrib->dst);
++	if(ptdls_sta==NULL){
++		return ret;
++	}else if(ptdls_sta->tdls_sta_state&TDLS_LINKED_STATE){
++
++		if(pattrib->triggered==1)
++		{
++			ret = _TRUE;
++			return ret;
++			}
++
++		_enter_critical_bh(&ptdls_sta->sleep_q.lock, &irqL);	
++		
++		if(ptdls_sta->state&WIFI_SLEEP_STATE)
++		{
++			rtw_list_delete(&pxmitframe->list);
++		
++			//_enter_critical_bh(&psta->sleep_q.lock, &irqL);	
++			
++			rtw_list_insert_tail(&pxmitframe->list, get_list_head(&ptdls_sta->sleep_q));
++			
++			ptdls_sta->sleepq_len++;
++			ptdls_sta->sleepq_ac_len++;
++
++			//indicate 4-AC queue bit in TDLS peer traffic indication
++			switch(pattrib->priority)
++			{
++				case 1:
++				case 2:
++					ptdls_sta->uapsd_bk = ptdls_sta->uapsd_bk | BIT(1);
++					break;
++				case 4:
++				case 5:
++					ptdls_sta->uapsd_vi = ptdls_sta->uapsd_vi | BIT(1);
++					break;
++				case 6:
++				case 7:
++					ptdls_sta->uapsd_vo = ptdls_sta->uapsd_vo | BIT(1);
++					break;
++				case 0:
++				case 3:
++				default:
++					ptdls_sta->uapsd_be = ptdls_sta->uapsd_be | BIT(1);
++					break;
++			}
++
++			if(ptdls_sta->sleepq_len==1)
++			{
++				//transmit TDLS PTI via AP
++				rtw_tdls_cmd(padapter, ptdls_sta->hwaddr, TDLS_SD_PTI);
++			}
++			ret = _TRUE;
++
++		}
++
++		_exit_critical_bh(&ptdls_sta->sleep_q.lock, &irqL);	
++	}
++
++	return ret;
++	
++}
++#endif //CONFIG_TDLS
++
++#if defined(CONFIG_AP_MODE) || defined(CONFIG_TDLS)
++
++sint xmitframe_enqueue_for_sleeping_sta(_adapter *padapter, struct xmit_frame *pxmitframe)
++{
++	_irqL irqL;
++	sint ret=_FALSE;
++	struct sta_info *psta=NULL;
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	struct pkt_attrib *pattrib = &pxmitframe->attrib;
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	sint bmcst = IS_MCAST(pattrib->ra);
++#ifdef CONFIG_TDLS
++	struct tdls_info *ptdlsinfo = &padapter->tdlsinfo;
++
++	if( ptdlsinfo->setup_state == TDLS_LINKED_STATE )
++	{
++		ret = xmitframe_enqueue_for_tdls_sleeping_sta(padapter, pxmitframe);
++		return ret;
++	}
++#endif //CONFIG_TDLS
++
++	if (check_fwstate(pmlmepriv, WIFI_AP_STATE) == _FALSE)
++	    return ret;
++
++	if(pattrib->psta)
++	{
++		psta = pattrib->psta;
++	}
++	else
++	{
++		DBG_871X("%s, call rtw_get_stainfo()\n", __func__);
++		psta=rtw_get_stainfo(pstapriv, pattrib->ra);
++	}
++
++	if(psta==NULL)
++	{
++		DBG_871X("%s, psta==NUL\n", __func__);
++		return _FALSE;
++	}
++
++	if(!(psta->state &_FW_LINKED))
++	{
++		DBG_871X("%s, psta->state(0x%x) != _FW_LINKED\n", __func__, psta->state);
++		return _FALSE;
++	}
++
++	if(pattrib->triggered==1)
++	{
++		//DBG_871X("directly xmit pspoll_triggered packet\n");
++
++		//pattrib->triggered=0;
++
++		if(bmcst)
++			pattrib->qsel = 0x11;//HIQ
++		
++
++		return ret;
++	}
++
++
++	if(bmcst)
++	{
++		_enter_critical_bh(&psta->sleep_q.lock, &irqL);	
++	
++		if(pstapriv->sta_dz_bitmap)//if anyone sta is in ps mode
++		{
++			//pattrib->qsel = 0x11;//HIQ
++			
++			rtw_list_delete(&pxmitframe->list);
++			
++			//_enter_critical_bh(&psta->sleep_q.lock, &irqL);	
++			
++			rtw_list_insert_tail(&pxmitframe->list, get_list_head(&psta->sleep_q));
++			
++			psta->sleepq_len++;
++
++			pstapriv->tim_bitmap |= BIT(0);//
++			pstapriv->sta_dz_bitmap |= BIT(0);
++			
++			//DBG_871X("enqueue, sq_len=%d, tim=%x\n", psta->sleepq_len, pstapriv->tim_bitmap);
++
++			update_beacon(padapter, _TIM_IE_, NULL, _FALSE);//tx bc/mc packets after upate bcn
++			
++			//_exit_critical_bh(&psta->sleep_q.lock, &irqL);				
++			
++			ret = _TRUE;			
++			
++		}
++		
++		_exit_critical_bh(&psta->sleep_q.lock, &irqL);	
++		
++		return ret;
++		
++	}
++	
++
++	_enter_critical_bh(&psta->sleep_q.lock, &irqL);	
++	
++	if(psta->state&WIFI_SLEEP_STATE)
++	{
++		u8 wmmps_ac=0;
++	
++		if(pstapriv->sta_dz_bitmap&BIT(psta->aid))	
++		{			
++			rtw_list_delete(&pxmitframe->list);
++		
++			//_enter_critical_bh(&psta->sleep_q.lock, &irqL);	
++			
++			rtw_list_insert_tail(&pxmitframe->list, get_list_head(&psta->sleep_q));
++			
++			psta->sleepq_len++;
++
++			switch(pattrib->priority)
++			{
++				case 1:
++				case 2:
++					wmmps_ac = psta->uapsd_bk&BIT(0);
++					break;
++				case 4:
++				case 5:
++					wmmps_ac = psta->uapsd_vi&BIT(0);
++					break;
++				case 6:
++				case 7:
++					wmmps_ac = psta->uapsd_vo&BIT(0);
++					break;
++				case 0:
++				case 3:
++				default:
++					wmmps_ac = psta->uapsd_be&BIT(0);
++					break;
++			}
++
++			if(wmmps_ac)
++				psta->sleepq_ac_len++;
++
++			if(((psta->has_legacy_ac) && (!wmmps_ac)) ||((!psta->has_legacy_ac)&&(wmmps_ac)))
++			{
++				pstapriv->tim_bitmap |= BIT(psta->aid);
++
++				//DBG_871X("enqueue, sq_len=%d, tim=%x\n", psta->sleepq_len, pstapriv->tim_bitmap);
++
++				if(psta->sleepq_len==1)
++				{
++					//DBG_871X("sleepq_len==1, update BCNTIM\n");
++					//upate BCN for TIM IE
++					update_beacon(padapter, _TIM_IE_, NULL, _FALSE);
++				}
++			}
++
++			//_exit_critical_bh(&psta->sleep_q.lock, &irqL);			
++
++			//if(psta->sleepq_len > (NR_XMITFRAME>>3))
++			//{
++			//	wakeup_sta_to_xmit(padapter, psta);
++			//}	
++
++			ret = _TRUE;
++
++		}
++
++	}
++
++	_exit_critical_bh(&psta->sleep_q.lock, &irqL);	
++
++	return ret;
++	
++}
++
++static void dequeue_xmitframes_to_sleeping_queue(_adapter *padapter, struct sta_info *psta, _queue *pframequeue)
++{
++	sint ret;
++	_list	*plist, *phead;
++	u8	ac_index;
++	struct tx_servq	*ptxservq;
++	struct pkt_attrib	*pattrib;
++	struct xmit_frame 	*pxmitframe;
++	struct hw_xmit *phwxmits =  padapter->xmitpriv.hwxmits;
++	
++	phead = get_list_head(pframequeue);
++	plist = get_next(phead);
++	
++	while (rtw_end_of_queue_search(phead, plist) == _FALSE)
++	{			
++		pxmitframe = LIST_CONTAINOR(plist, struct xmit_frame, list);
++
++		plist = get_next(plist);	
++		
++		ret = xmitframe_enqueue_for_sleeping_sta(padapter, pxmitframe);	
++
++		if(_TRUE == ret)
++		{
++		pattrib = &pxmitframe->attrib;
++
++		ptxservq = rtw_get_sta_pending(padapter, psta, pattrib->priority, (u8 *)(&ac_index));
++
++		ptxservq->qcnt--;
++		phwxmits[ac_index].accnt--;		
++	}
++		else
++		{
++			//DBG_871X("xmitframe_enqueue_for_sleeping_sta return _FALSE\n");
++		}
++		
++	}
++	
++}
++
++void stop_sta_xmit(_adapter *padapter, struct sta_info *psta)
++{	
++	_irqL irqL0;	
++	struct sta_info *psta_bmc;
++	struct sta_xmit_priv *pstaxmitpriv;
++	struct sta_priv *pstapriv = &padapter->stapriv;	
++	struct xmit_priv *pxmitpriv = &padapter->xmitpriv;	
++	
++	pstaxmitpriv = &psta->sta_xmitpriv;
++
++	//for BC/MC Frames
++	psta_bmc = rtw_get_bcmc_stainfo(padapter);
++	
++			
++	_enter_critical_bh(&pxmitpriv->lock, &irqL0);
++
++	psta->state |= WIFI_SLEEP_STATE;
++	
++#ifdef CONFIG_TDLS
++	if( !(psta->tdls_sta_state & TDLS_LINKED_STATE) )
++#endif //CONFIG_TDLS	
++	pstapriv->sta_dz_bitmap |= BIT(psta->aid);
++	
++	
++
++	dequeue_xmitframes_to_sleeping_queue(padapter, psta, &pstaxmitpriv->vo_q.sta_pending);
++	rtw_list_delete(&(pstaxmitpriv->vo_q.tx_pending));
++
++
++	dequeue_xmitframes_to_sleeping_queue(padapter, psta, &pstaxmitpriv->vi_q.sta_pending);
++	rtw_list_delete(&(pstaxmitpriv->vi_q.tx_pending));
++
++
++	dequeue_xmitframes_to_sleeping_queue(padapter, psta, &pstaxmitpriv->be_q.sta_pending);
++	rtw_list_delete(&(pstaxmitpriv->be_q.tx_pending));
++	
++
++	dequeue_xmitframes_to_sleeping_queue(padapter, psta, &pstaxmitpriv->bk_q.sta_pending);
++	rtw_list_delete(&(pstaxmitpriv->bk_q.tx_pending));
++
++#ifdef CONFIG_TDLS
++	if( !(psta->tdls_sta_state & TDLS_LINKED_STATE) )
++	{
++		if( psta_bmc != NULL )
++		{
++#endif //CONFIG_TDLS
++
++
++	//for BC/MC Frames
++	pstaxmitpriv = &psta_bmc->sta_xmitpriv;
++	dequeue_xmitframes_to_sleeping_queue(padapter, psta_bmc, &pstaxmitpriv->be_q.sta_pending);
++	rtw_list_delete(&(pstaxmitpriv->be_q.tx_pending));
++	
++
++#ifdef CONFIG_TDLS	
++		}
++	}
++#endif //CONFIG_TDLS	
++	_exit_critical_bh(&pxmitpriv->lock, &irqL0);
++	
++
++}	
++
++void wakeup_sta_to_xmit(_adapter *padapter, struct sta_info *psta)
++{	 
++	_irqL irqL;	 
++	u8 update_mask=0, wmmps_ac=0;
++	struct sta_info *psta_bmc;
++	_list	*xmitframe_plist, *xmitframe_phead;
++	struct xmit_frame *pxmitframe=NULL;
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
++
++	psta_bmc = rtw_get_bcmc_stainfo(padapter);
++	
++
++	//_enter_critical_bh(&psta->sleep_q.lock, &irqL);
++	_enter_critical_bh(&pxmitpriv->lock, &irqL);
++
++	xmitframe_phead = get_list_head(&psta->sleep_q);
++	xmitframe_plist = get_next(xmitframe_phead);
++
++	while ((rtw_end_of_queue_search(xmitframe_phead, xmitframe_plist)) == _FALSE)
++	{			
++		pxmitframe = LIST_CONTAINOR(xmitframe_plist, struct xmit_frame, list);
++
++		xmitframe_plist = get_next(xmitframe_plist);            
++
++		rtw_list_delete(&pxmitframe->list);
++
++		switch(pxmitframe->attrib.priority)
++		{
++			case 1:
++			case 2:
++				wmmps_ac = psta->uapsd_bk&BIT(1);
++				break;
++			case 4:
++			case 5:
++				wmmps_ac = psta->uapsd_vi&BIT(1);
++				break;
++			case 6:
++			case 7:
++				wmmps_ac = psta->uapsd_vo&BIT(1);
++				break;
++			case 0:
++			case 3:
++			default:
++				wmmps_ac = psta->uapsd_be&BIT(1);
++				break;	
++		}
++
++		psta->sleepq_len--;
++		if(psta->sleepq_len>0)
++			pxmitframe->attrib.mdata = 1;
++		else
++			pxmitframe->attrib.mdata = 0;
++
++		if(wmmps_ac)
++		{
++			psta->sleepq_ac_len--;
++			if(psta->sleepq_ac_len>0)
++			{
++				pxmitframe->attrib.mdata = 1;
++				pxmitframe->attrib.eosp = 0;
++			}
++			else
++			{
++				pxmitframe->attrib.mdata = 0;
++				pxmitframe->attrib.eosp = 1;
++			}
++		}
++		
++		pxmitframe->attrib.triggered = 1;
++
++/*
++		_exit_critical_bh(&psta->sleep_q.lock, &irqL);	
++		if(rtw_hal_xmit(padapter, pxmitframe) == _TRUE)
++		{		
++			rtw_os_xmit_complete(padapter, pxmitframe);
++		}		
++		_enter_critical_bh(&psta->sleep_q.lock, &irqL);
++*/
++		rtw_hal_xmitframe_enqueue(padapter, pxmitframe);
++
++		
++	}	
++	
++	//for BC/MC Frames
++	if(!psta_bmc)
++		goto _exit;
++
++	if((pstapriv->sta_dz_bitmap&0xfffe) == 0x0)//no any sta in ps mode
++	{
++		xmitframe_phead = get_list_head(&psta_bmc->sleep_q);
++		xmitframe_plist = get_next(xmitframe_phead);
++
++		while ((rtw_end_of_queue_search(xmitframe_phead, xmitframe_plist)) == _FALSE)
++		{			
++			pxmitframe = LIST_CONTAINOR(xmitframe_plist, struct xmit_frame, list);
++
++			xmitframe_plist = get_next(xmitframe_plist);
++
++			rtw_list_delete(&pxmitframe->list);
++
++			psta_bmc->sleepq_len--;
++			if(psta_bmc->sleepq_len>0)
++				pxmitframe->attrib.mdata = 1;
++			else
++				pxmitframe->attrib.mdata = 0;
++			
++
++			pxmitframe->attrib.triggered = 1;
++/*
++			_exit_critical_bh(&psta_bmc->sleep_q.lock, &irqL);	
++			if(rtw_hal_xmit(padapter, pxmitframe) == _TRUE)
++			{		
++				rtw_os_xmit_complete(padapter, pxmitframe);
++			}
++			_enter_critical_bh(&psta_bmc->sleep_q.lock, &irqL);	
++
++*/
++			rtw_hal_xmitframe_enqueue(padapter, pxmitframe);
++
++		}	
++	
++		if(psta_bmc->sleepq_len==0)
++		{
++			pstapriv->tim_bitmap &= ~BIT(0);
++			pstapriv->sta_dz_bitmap &= ~BIT(0);
++
++			//DBG_871X("wakeup to xmit, qlen==0, update_BCNTIM, tim=%x\n", pstapriv->tim_bitmap);
++			//upate BCN for TIM IE
++			//update_BCNTIM(padapter);
++			update_mask |= BIT(1);
++		}		
++	
++	}	
++
++	if(psta->sleepq_len==0)
++	{
++#ifdef CONFIG_TDLS
++		if( psta->tdls_sta_state & TDLS_LINKED_STATE )
++		{
++			if(psta->state&WIFI_SLEEP_STATE)
++				psta->state ^= WIFI_SLEEP_STATE;
++
++			goto _exit;
++	}	
++#endif //CONFIG_TDLS
++		pstapriv->tim_bitmap &= ~BIT(psta->aid);
++
++		//DBG_871X("wakeup to xmit, qlen==0, update_BCNTIM, tim=%x\n", pstapriv->tim_bitmap);
++		//upate BCN for TIM IE
++		//update_BCNTIM(padapter);
++		update_mask = BIT(0);
++
++		if(psta->state&WIFI_SLEEP_STATE)
++			psta->state ^= WIFI_SLEEP_STATE;
++
++		if(psta->state & WIFI_STA_ALIVE_CHK_STATE)
++		{
++			psta->expire_to = pstapriv->expire_to;
++			psta->state ^= WIFI_STA_ALIVE_CHK_STATE;
++		}
++
++		pstapriv->sta_dz_bitmap &= ~BIT(psta->aid);
++	}
++
++_exit:
++
++	//_exit_critical_bh(&psta_bmc->sleep_q.lock, &irqL);	
++	_exit_critical_bh(&pxmitpriv->lock, &irqL);
++	
++	if(update_mask)
++	{
++		//update_BCNTIM(padapter);
++		//printk("%s => call update_beacon\n",__FUNCTION__);
++		update_beacon(padapter, _TIM_IE_, NULL, _FALSE);
++	}	
++	
++}
++
++void xmit_delivery_enabled_frames(_adapter *padapter, struct sta_info *psta)
++{
++	_irqL irqL;
++	u8 wmmps_ac=0;
++	_list	*xmitframe_plist, *xmitframe_phead;
++	struct xmit_frame *pxmitframe=NULL;
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
++
++
++	//_enter_critical_bh(&psta->sleep_q.lock, &irqL);
++	_enter_critical_bh(&pxmitpriv->lock, &irqL);
++
++	xmitframe_phead = get_list_head(&psta->sleep_q);
++	xmitframe_plist = get_next(xmitframe_phead);
++
++	while ((rtw_end_of_queue_search(xmitframe_phead, xmitframe_plist)) == _FALSE)
++	{			
++		pxmitframe = LIST_CONTAINOR(xmitframe_plist, struct xmit_frame, list);
++
++		xmitframe_plist = get_next(xmitframe_plist);
++
++		switch(pxmitframe->attrib.priority)
++		{
++			case 1:
++			case 2:
++				wmmps_ac = psta->uapsd_bk&BIT(1);
++				break;
++			case 4:
++			case 5:
++				wmmps_ac = psta->uapsd_vi&BIT(1);
++				break;
++			case 6:
++			case 7:
++				wmmps_ac = psta->uapsd_vo&BIT(1);
++				break;
++			case 0:
++			case 3:
++			default:
++				wmmps_ac = psta->uapsd_be&BIT(1);
++				break;	
++		}
++		
++		if(!wmmps_ac)
++			continue;
++
++		rtw_list_delete(&pxmitframe->list);
++
++		psta->sleepq_len--;
++		psta->sleepq_ac_len--;
++
++		if(psta->sleepq_ac_len>0)
++		{
++			pxmitframe->attrib.mdata = 1;
++			pxmitframe->attrib.eosp = 0;
++		}
++		else
++		{
++			pxmitframe->attrib.mdata = 0;
++			pxmitframe->attrib.eosp = 1;
++		}
++
++		pxmitframe->attrib.triggered = 1;
++
++/*
++		if(rtw_hal_xmit(padapter, pxmitframe) == _TRUE)
++		{		
++			rtw_os_xmit_complete(padapter, pxmitframe);
++		}
++*/
++		rtw_hal_xmitframe_enqueue(padapter, pxmitframe);
++
++		if((psta->sleepq_ac_len==0) && (!psta->has_legacy_ac) && (wmmps_ac))
++		{
++#ifdef CONFIG_TDLS
++			if(psta->tdls_sta_state & TDLS_LINKED_STATE )
++			{
++				//_exit_critical_bh(&psta->sleep_q.lock, &irqL);
++				_exit_critical_bh(&pxmitpriv->lock, &irqL);
++				return;
++			}
++#endif //CONFIG_TDLS
++			pstapriv->tim_bitmap &= ~BIT(psta->aid);
++
++			//DBG_871X("wakeup to xmit, qlen==0, update_BCNTIM, tim=%x\n", pstapriv->tim_bitmap);
++			//upate BCN for TIM IE
++			//update_BCNTIM(padapter);
++			update_beacon(padapter, _TIM_IE_, NULL, _FALSE);
++			//update_mask = BIT(0);
++		}
++	
++	}
++	
++	//_exit_critical_bh(&psta->sleep_q.lock, &irqL);	
++	_exit_critical_bh(&pxmitpriv->lock, &irqL);
++
++}
++
++#endif
++
++void rtw_sctx_init(struct submit_ctx *sctx, int timeout_ms)
++{
++	sctx->timeout_ms = timeout_ms;
++	sctx->submit_time= rtw_get_current_time();
++#ifdef PLATFORM_LINUX /* TODO: add condition wating interface for other os */
++	init_completion(&sctx->done);
++#endif
++	sctx->status = RTW_SCTX_SUBMITTED;
++}
++
++int rtw_sctx_wait(struct submit_ctx *sctx)
++{
++	int ret = _FAIL;
++	unsigned long expire; 
++	int status = 0;
++
++#ifdef PLATFORM_LINUX
++	expire= sctx->timeout_ms ? msecs_to_jiffies(sctx->timeout_ms) : MAX_SCHEDULE_TIMEOUT;
++	if (!wait_for_completion_timeout(&sctx->done, expire)) {
++		/* timeout, do something?? */
++		status = RTW_SCTX_DONE_TIMEOUT;
++		DBG_871X("%s timeout\n", __func__);	
++	} else {
++		status = sctx->status;
++	}
++#endif
++
++	if (status == RTW_SCTX_DONE_SUCCESS) {
++		ret = _SUCCESS;
++	}
++
++	return ret;
++}
++
++bool rtw_sctx_chk_waring_status(int status)
++{
++	switch(status) {
++	case RTW_SCTX_DONE_UNKNOWN:
++	case RTW_SCTX_DONE_BUF_ALLOC:
++	case RTW_SCTX_DONE_BUF_FREE:
++
++	case RTW_SCTX_DONE_DRV_STOP:
++	case RTW_SCTX_DONE_DEV_REMOVE:
++		return _TRUE;
++	default:
++		return _FALSE;
++	}
++}
++
++void rtw_sctx_done_err(struct submit_ctx **sctx, int status)
++{
++	if (*sctx) {
++		if (rtw_sctx_chk_waring_status(status))
++			DBG_871X("%s status:%d\n", __func__, status);
++		(*sctx)->status = status;
++		#ifdef PLATFORM_LINUX
++		complete(&((*sctx)->done));
++		#endif
++		*sctx = NULL;
++	}
++}
++
++void rtw_sctx_done(struct submit_ctx **sctx)
++{
++	rtw_sctx_done_err(sctx, RTW_SCTX_DONE_SUCCESS);
++}
++
++#ifdef CONFIG_XMIT_ACK
++
++#ifdef CONFIG_XMIT_ACK_POLLING
++s32 c2h_evt_hdl(_adapter *adapter, struct c2h_evt_hdr *c2h_evt, c2h_id_filter filter);
++
++/**
++ * rtw_ack_tx_polling -
++ * @pxmitpriv: xmit_priv to address ack_tx_ops
++ * @timeout_ms: timeout msec
++ *
++ * Init ack_tx_ops and then do c2h_evt_hdl() and polling ack_tx_ops repeatedly
++ * till tx report or timeout
++ * Returns: _SUCCESS if TX report ok, _FAIL for others
++ */
++int rtw_ack_tx_polling(struct xmit_priv *pxmitpriv, u32 timeout_ms)
++{
++	int ret = _FAIL;
++	struct submit_ctx *pack_tx_ops = &pxmitpriv->ack_tx_ops;
++	_adapter *adapter = container_of(pxmitpriv, _adapter, xmitpriv);
++
++	pack_tx_ops->submit_time = rtw_get_current_time();
++	pack_tx_ops->timeout_ms = timeout_ms;
++	pack_tx_ops->status = RTW_SCTX_SUBMITTED;
++
++	do {
++		c2h_evt_hdl(adapter, NULL, rtw_hal_c2h_id_filter_ccx(adapter));
++		if (pack_tx_ops->status != RTW_SCTX_SUBMITTED)
++			break;
++
++		if (adapter->bDriverStopped) {
++			pack_tx_ops->status = RTW_SCTX_DONE_DRV_STOP;
++			break;
++		}
++		if (adapter->bSurpriseRemoved) {
++			pack_tx_ops->status = RTW_SCTX_DONE_DEV_REMOVE;
++			break;
++		}
++		
++		rtw_msleep_os(10);
++	} while (rtw_get_passing_time_ms(pack_tx_ops->submit_time) < timeout_ms);
++
++	if (pack_tx_ops->status == RTW_SCTX_SUBMITTED) {
++		pack_tx_ops->status = RTW_SCTX_DONE_TIMEOUT;
++		DBG_871X("%s timeout\n", __func__);
++	}
++
++	if (pack_tx_ops->status == RTW_SCTX_DONE_SUCCESS)
++		ret = _SUCCESS;
++
++	return ret;
++}
++#endif
++
++int rtw_ack_tx_wait(struct xmit_priv *pxmitpriv, u32 timeout_ms)
++{
++#ifdef CONFIG_XMIT_ACK_POLLING
++	return rtw_ack_tx_polling(pxmitpriv, timeout_ms);
++#else
++	struct submit_ctx *pack_tx_ops = &pxmitpriv->ack_tx_ops;
++
++	pack_tx_ops->submit_time = rtw_get_current_time();
++	pack_tx_ops->timeout_ms = timeout_ms;
++	pack_tx_ops->status = RTW_SCTX_SUBMITTED;
++
++	return rtw_sctx_wait(pack_tx_ops);
++#endif
++}
++
++void rtw_ack_tx_done(struct xmit_priv *pxmitpriv, int status)
++{
++	struct submit_ctx *pack_tx_ops = &pxmitpriv->ack_tx_ops;
++	
++	if (pxmitpriv->ack_tx) {
++		rtw_sctx_done_err(&pack_tx_ops, status);
++	} else {
++		DBG_871X("%s ack_tx not set\n", __func__);
++	}
++}
++#endif //CONFIG_XMIT_ACK
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/dm.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/dm.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/dm.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/dm.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,314 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2013 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++
++#ifdef CONFIG_RTL8192C
++#include <rtl8192c_hal.h>
++#endif
++
++#ifdef CONFIG_RTL8192D
++#include <rtl8192d_hal.h>
++#endif
++
++bool rtw_adapter_linked(_adapter *adapter)
++{
++	bool linked = _FALSE;
++	struct mlme_priv	*mlmepriv = &adapter->mlmepriv;
++
++	if(	(check_fwstate(mlmepriv, WIFI_AP_STATE) == _TRUE) ||
++		(check_fwstate(mlmepriv, WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE) == _TRUE))
++	{				
++		if(adapter->stapriv.asoc_sta_count > 2)
++			linked = _TRUE;
++	}
++	else{//Station mode
++		if(check_fwstate(mlmepriv, _FW_LINKED)== _TRUE)
++			linked = _TRUE;
++	}
++
++	return linked;
++}
++
++bool dm_linked(_adapter *adapter)
++{
++	bool linked;
++
++	if ((linked = rtw_adapter_linked(adapter)))
++		goto exit;
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if ((adapter =  adapter->pbuddy_adapter) == NULL)
++		goto exit;
++	linked = rtw_adapter_linked(adapter);
++#endif
++
++exit:
++	return linked;
++}
++
++#if 0
++void dm_enable_EDCCA(_adapter *adapter)
++{
++	// Enable EDCCA. The value is suggested by SD3 Wilson.
++
++	//
++	// Revised for ASUS 11b/g performance issues, suggested by BB Neil, 2012.04.13.
++	//
++	/*if((pDM_Odm->SupportICType == ODM_RTL8723A)&&(IS_WIRELESS_MODE_G(pAdapter)))
++	{
++		rtw_write8(adapter,rOFDM0_ECCAThreshold,0x00);
++		rtw_write8(adapter,rOFDM0_ECCAThreshold+2,0xFD);
++		
++	}	
++	else*/
++	{
++		rtw_write8(adapter,rOFDM0_ECCAThreshold,0x03);
++		rtw_write8(adapter,rOFDM0_ECCAThreshold+2,0x00);
++	}
++}
++
++void dm_disable_EDCCA(_adapter *adapter)
++{	
++	// Disable EDCCA..
++	rtw_write8(adapter, rOFDM0_ECCAThreshold, 0x7f);
++	rtw_write8(adapter, rOFDM0_ECCAThreshold+2, 0x7f);
++}
++
++//
++// Description: According to initial gain value to determine to enable or disable EDCCA.
++//
++// Suggested by SD3 Wilson. Added by tynli. 2011.11.25.
++//
++void dm_dynamic_EDCCA(_adapter *pAdapter)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	struct dm_priv *dmpriv = &pHalData->dmpriv;
++	u8 RegC50, RegC58;
++	
++	RegC50 = (u8)PHY_QueryBBReg(pAdapter, rOFDM0_XAAGCCore1, bMaskByte0);
++	RegC58 = (u8)PHY_QueryBBReg(pAdapter, rOFDM0_XBAGCCore1, bMaskByte0);
++
++
++ 	if((RegC50 > 0x28 && RegC58 > 0x28)
++  		/*|| ((pDM_Odm->SupportICType == ODM_RTL8723A && IS_WIRELESS_MODE_G(pAdapter) && RegC50>0x26))
++  		|| (pDM_Odm->SupportICType == ODM_RTL8188E && RegC50 > 0x28)*/
++  	)
++	{
++		if(!dmpriv->bPreEdccaEnable)
++		{
++			dm_enable_EDCCA(pAdapter);
++			dmpriv->bPreEdccaEnable = _TRUE;
++		}
++		
++	}
++	else if((RegC50 < 0x25 && RegC58 < 0x25)
++		/*|| (pDM_Odm->SupportICType == ODM_RTL8188E && RegC50 < 0x25)*/
++	)
++	{
++		if(dmpriv->bPreEdccaEnable)
++		{
++			dm_disable_EDCCA(pAdapter);
++			dmpriv->bPreEdccaEnable = _FALSE;
++		}
++	}
++}
++#endif
++
++#define DM_ADAPTIVITY_VER "ADAPTIVITY_V001"
++
++int dm_adaptivity_get_parm_str(_adapter *pAdapter, char *buf, int len)
++{
++#ifdef CONFIG_DM_ADAPTIVITY
++	HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
++	struct dm_priv *dmpriv = &pHalData->dmpriv;
++
++	return snprintf(buf, len, DM_ADAPTIVITY_VER"\n"
++		"TH_L2H_ini\tTH_EDCCA_HL_diff\tIGI_Base\tForceEDCCA\tAdapEn_RSSI\tIGI_LowerBound\n"
++		"0x%02x\t%d\t0x%02x\t%d\t%u\t%u\n",
++		(u8)dmpriv->TH_L2H_ini,
++		dmpriv->TH_EDCCA_HL_diff,
++		dmpriv->IGI_Base,
++		dmpriv->ForceEDCCA,
++		dmpriv->AdapEn_RSSI,
++		dmpriv->IGI_LowerBound
++	);
++#endif /* CONFIG_DM_ADAPTIVITY */
++	return 0;
++}
++
++void dm_adaptivity_set_parm(_adapter *pAdapter, s8 TH_L2H_ini, s8 TH_EDCCA_HL_diff,
++	s8 IGI_Base, bool ForceEDCCA, u8 AdapEn_RSSI, u8 IGI_LowerBound)
++{
++#ifdef CONFIG_DM_ADAPTIVITY
++	HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
++	struct dm_priv *dmpriv = &pHalData->dmpriv;
++
++	dmpriv->TH_L2H_ini = TH_L2H_ini;
++	dmpriv->TH_EDCCA_HL_diff = TH_EDCCA_HL_diff;
++	dmpriv->IGI_Base = IGI_Base;
++	dmpriv->ForceEDCCA = ForceEDCCA;
++	dmpriv->AdapEn_RSSI = AdapEn_RSSI;
++	dmpriv->IGI_LowerBound = IGI_LowerBound;
++
++#endif /* CONFIG_DM_ADAPTIVITY */
++}
++
++void dm_adaptivity_init(_adapter *pAdapter)
++{
++#ifdef CONFIG_DM_ADAPTIVITY
++	HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
++	struct dm_priv *dmpriv = &pHalData->dmpriv;
++
++	/*
++	if(pDM_Odm->SupportICType == ODM_RTL8723B)
++	{
++		pDM_Odm->TH_L2H_ini = 0xf8; // -8
++	}
++	if((pDM_Odm->SupportICType == ODM_RTL8192E)&&(pDM_Odm->SupportInterface == ODM_ITRF_PCIE))
++	{
++		pDM_Odm->TH_L2H_ini = 0xf0; // -16
++	}
++	else */
++	{
++		dmpriv->TH_L2H_ini = 0xf9; // -7
++	}
++
++	dmpriv->TH_EDCCA_HL_diff = 7;
++	dmpriv->IGI_Base = 0x32;
++	dmpriv->IGI_target = 0x1c;
++	dmpriv->ForceEDCCA = 0;
++	dmpriv->AdapEn_RSSI = 20;
++	dmpriv->IGI_LowerBound = 0;
++
++	//Reg524[11]=0 is easily to transmit packets during adaptivity test
++	PHY_SetBBReg(pAdapter, 0x524, BIT11, 1); // stop counting if EDCCA is asserted
++
++#endif /* CONFIG_DM_ADAPTIVITY */
++}
++
++void dm_adaptivity(_adapter *pAdapter)
++{
++#ifdef CONFIG_DM_ADAPTIVITY
++	s8 TH_L2H_dmc, TH_H2L_dmc;
++	s8 TH_L2H, TH_H2L, Diff, IGI_target;
++	u32 value32;
++	BOOLEAN EDCCA_State;
++
++	HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
++	struct dm_priv *dmpriv = &pHalData->dmpriv;
++	DIG_T *pDigTable = &dmpriv->DM_DigTable;
++	u8 IGI = pDigTable->CurIGValue;
++	u8 RSSI_Min = pDigTable->Rssi_val_min;
++	HT_CHANNEL_WIDTH BandWidth = pHalData->CurrentChannelBW;
++
++	if (!(dmpriv->DMFlag & DYNAMIC_FUNC_ADAPTIVITY))
++	{
++		LOG_LEVEL(_drv_info_, "Go to odm_DynamicEDCCA() \n");
++		// Add by Neil Chen to enable edcca to MP Platform 
++		// Adjust EDCCA.
++		/*if(pDM_Odm->SupportICType & ODM_IC_11N_SERIES)
++			dm_dynamic_EDCCA(pAdapter);
++		*/
++		return;
++	}
++	LOG_LEVEL(_drv_info_, "odm_Adaptivity() =====> \n");
++
++	LOG_LEVEL(_drv_info_, "ForceEDCCA=%d, IGI_Base=0x%x, TH_L2H_ini = %d, TH_EDCCA_HL_diff = %d, AdapEn_RSSI = %d\n", 
++		dmpriv->ForceEDCCA, dmpriv->IGI_Base, dmpriv->TH_L2H_ini, dmpriv->TH_EDCCA_HL_diff, dmpriv->AdapEn_RSSI);
++
++	/*if(pDM_Odm->SupportICType & ODM_IC_11AC_SERIES)
++		PHY_SetBBReg(0x800, BIT10, 0); //ADC_mask enable
++	*/
++	
++	if(!dm_linked(pAdapter) || pHalData->CurrentChannel > 149) /* Band4 doesn't need adaptivity */
++	{
++		/*if(pDM_Odm->SupportICType & ODM_IC_11N_SERIES)*/
++		{
++			PHY_SetBBReg(pAdapter,rOFDM0_ECCAThreshold, bMaskByte0, 0x7f);
++			PHY_SetBBReg(pAdapter,rOFDM0_ECCAThreshold, bMaskByte2, 0x7f);
++		}
++		/*else
++		{
++			ODM_SetBBReg(pDM_Odm, rFPGA0_XB_LSSIReadBack, 0xFFFF, (0x7f<<8) | 0x7f);
++		}*/
++		return;
++	}
++
++	if(!dmpriv->ForceEDCCA)
++	{
++		if(RSSI_Min > dmpriv->AdapEn_RSSI)
++			EDCCA_State = 1;
++		else if(RSSI_Min < (dmpriv->AdapEn_RSSI - 5))
++			EDCCA_State = 0;
++	}
++	else
++		EDCCA_State = 1;
++	//if((pDM_Odm->SupportICType & ODM_IC_11AC_SERIES) && (*pDM_Odm->pBandType == BAND_ON_5G))
++		//IGI_target = pDM_Odm->IGI_Base;
++	//else
++	{
++
++		if(BandWidth == HT_CHANNEL_WIDTH_20) //CHANNEL_WIDTH_20
++			IGI_target = dmpriv->IGI_Base;
++		else if(BandWidth == HT_CHANNEL_WIDTH_40)
++			IGI_target = dmpriv->IGI_Base + 2;
++		/*else if(*pDM_Odm->pBandWidth == ODM_BW80M)
++			IGI_target = pDM_Odm->IGI_Base + 6;*/
++		else
++			IGI_target = dmpriv->IGI_Base;
++	}
++
++	dmpriv->IGI_target = (u8)IGI_target;
++
++	LOG_LEVEL(_drv_info_, "BandWidth=%s, IGI_target=0x%x, EDCCA_State=%d\n",
++		(BandWidth==HT_CHANNEL_WIDTH_40)?"40M":"20M", IGI_target, EDCCA_State);
++
++	if(EDCCA_State == 1)
++	{
++		Diff = IGI_target -(s8)IGI;
++		TH_L2H_dmc = dmpriv->TH_L2H_ini + Diff;
++		if(TH_L2H_dmc > 10) 	TH_L2H_dmc = 10;
++		TH_H2L_dmc = TH_L2H_dmc - dmpriv->TH_EDCCA_HL_diff;
++	}
++	else
++	{
++		TH_L2H_dmc = 0x7f;
++		TH_H2L_dmc = 0x7f;
++	}
++
++	LOG_LEVEL(_drv_info_, "IGI=0x%x, TH_L2H_dmc = %d, TH_H2L_dmc = %d\n", 
++		IGI, TH_L2H_dmc, TH_H2L_dmc);
++
++	/*if(pDM_Odm->SupportICType & ODM_IC_11N_SERIES)*/
++	{
++		PHY_SetBBReg(pAdapter,rOFDM0_ECCAThreshold, bMaskByte0, (u8)TH_L2H_dmc);
++		PHY_SetBBReg(pAdapter,rOFDM0_ECCAThreshold, bMaskByte2, (u8)TH_H2L_dmc);
++	}
++	/*else
++		PHY_SetBBReg(pAdapter, rFPGA0_XB_LSSIReadBack, 0xFFFF, ((u8)TH_H2L_dmc<<8) | (u8)TH_L2H_dmc);*/
++
++skip_dm:
++	return;
++#endif /* CONFIG_DM_ADAPTIVITY */
++}
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/dm.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/dm.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/dm.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/dm.h	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,30 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2013 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++
++ #ifndef	__DM_H__
++#define __DM_H__
++
++int dm_adaptivity_get_parm_str(_adapter *pAdapter, char *buf, int len);
++void dm_adaptivity_set_parm(_adapter *pAdapter, s8 TH_L2H_ini, s8 TH_EDCCA_HL_diff,
++	s8 IGI_Base, bool ForceEDCCA, u8 AdapEn_RSSI, u8 IGI_LowerBound);
++void dm_adaptivity_init(_adapter *pAdapter);
++void dm_adaptivity(_adapter *pAdapter);
++
++#endif /* __DM_H__ */
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/hal_com.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/hal_com.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/hal_com.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/hal_com.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,371 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <rtw_byteorder.h>
++
++#include <hal_intf.h>
++#include <hal_com.h>
++
++#ifdef CONFIG_RTL8192C
++#include <rtl8192c_hal.h>
++#endif
++#ifdef CONFIG_RTL8192D
++#include <rtl8192d_hal.h>
++#endif
++
++#define _HAL_COM_C_
++
++//============================================================
++// Global var
++//============================================================
++u32 OFDMSwingTable[OFDM_TABLE_SIZE_92D] = {
++	0x7f8001fe, // 0, +6.0dB
++	0x788001e2, // 1, +5.5dB
++	0x71c001c7, // 2, +5.0dB
++	0x6b8001ae, // 3, +4.5dB
++	0x65400195, // 4, +4.0dB
++	0x5fc0017f, // 5, +3.5dB
++	0x5a400169, // 6, +3.0dB
++	0x55400155, // 7, +2.5dB
++	0x50800142, // 8, +2.0dB
++	0x4c000130, // 9, +1.5dB
++	0x47c0011f, // 10, +1.0dB
++	0x43c0010f, // 11, +0.5dB
++	0x40000100, // 12, +0dB
++	0x3c8000f2, // 13, -0.5dB
++	0x390000e4, // 14, -1.0dB
++	0x35c000d7, // 15, -1.5dB
++	0x32c000cb, // 16, -2.0dB
++	0x300000c0, // 17, -2.5dB
++	0x2d4000b5, // 18, -3.0dB
++	0x2ac000ab, // 19, -3.5dB
++	0x288000a2, // 20, -4.0dB
++	0x26000098, // 21, -4.5dB
++	0x24000090, // 22, -5.0dB
++	0x22000088, // 23, -5.5dB
++	0x20000080, // 24, -6.0dB
++	0x1e400079, // 25, -6.5dB
++	0x1c800072, // 26, -7.0dB
++	0x1b00006c, // 27. -7.5dB
++	0x19800066, // 28, -8.0dB
++	0x18000060, // 29, -8.5dB
++	0x16c0005b, // 30, -9.0dB
++	0x15800056, // 31, -9.5dB
++	0x14400051, // 32, -10.0dB
++	0x1300004c, // 33, -10.5dB
++	0x12000048, // 34, -11.0dB
++	0x11000044, // 35, -11.5dB
++	0x10000040, // 36, -12.0dB
++	0x0f00003c,// 37, -12.5dB
++	0x0e400039,// 38, -13.0dB    
++	0x0d800036,// 39, -13.5dB
++	0x0cc00033,// 40, -14.0dB
++	0x0c000030,// 41, -14.5dB
++	0x0b40002d,// 42, -15.0dB	
++};
++
++
++u8 CCKSwingTable_Ch1_Ch13[CCK_TABLE_SIZE][8] = {
++	{0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04},	// 0, +0dB
++	{0x33, 0x32, 0x2b, 0x23, 0x1a, 0x11, 0x08, 0x04},	// 1, -0.5dB
++	{0x30, 0x2f, 0x29, 0x21, 0x19, 0x10, 0x08, 0x03},	// 2, -1.0dB
++	{0x2d, 0x2d, 0x27, 0x1f, 0x18, 0x0f, 0x08, 0x03},	// 3, -1.5dB
++	{0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03},	// 4, -2.0dB 
++	{0x28, 0x28, 0x22, 0x1c, 0x15, 0x0d, 0x07, 0x03},	// 5, -2.5dB
++	{0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03},	// 6, -3.0dB
++	{0x24, 0x23, 0x1f, 0x19, 0x13, 0x0c, 0x06, 0x03},	// 7, -3.5dB
++	{0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02},	// 8, -4.0dB 
++	{0x20, 0x20, 0x1b, 0x16, 0x11, 0x08, 0x05, 0x02},	// 9, -4.5dB
++	{0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02},	// 10, -5.0dB 
++	{0x1d, 0x1c, 0x18, 0x14, 0x0f, 0x0a, 0x05, 0x02},	// 11, -5.5dB
++	{0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02},	// 12, -6.0dB 
++	{0x1a, 0x19, 0x16, 0x12, 0x0d, 0x09, 0x04, 0x02},	// 13, -6.5dB
++	{0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02},	// 14, -7.0dB 
++	{0x17, 0x16, 0x13, 0x10, 0x0c, 0x08, 0x04, 0x02},	// 15, -7.5dB
++	{0x16, 0x15, 0x12, 0x0f, 0x0b, 0x07, 0x04, 0x01},	// 16, -8.0dB 
++	{0x14, 0x14, 0x11, 0x0e, 0x0b, 0x07, 0x03, 0x02},	// 17, -8.5dB
++	{0x13, 0x13, 0x10, 0x0d, 0x0a, 0x06, 0x03, 0x01},	// 18, -9.0dB 
++	{0x12, 0x12, 0x0f, 0x0c, 0x09, 0x06, 0x03, 0x01},	// 19, -9.5dB
++	{0x11, 0x11, 0x0f, 0x0c, 0x09, 0x06, 0x03, 0x01},	// 20, -10.0dB
++	{0x10, 0x10, 0x0e, 0x0b, 0x08, 0x05, 0x03, 0x01},	// 21, -10.5dB
++	{0x0f, 0x0f, 0x0d, 0x0b, 0x08, 0x05, 0x03, 0x01},	// 22, -11.0dB
++	{0x0e, 0x0e, 0x0c, 0x0a, 0x08, 0x05, 0x02, 0x01},	// 23, -11.5dB
++	{0x0d, 0x0d, 0x0c, 0x0a, 0x07, 0x05, 0x02, 0x01},	// 24, -12.0dB
++	{0x0d, 0x0c, 0x0b, 0x09, 0x07, 0x04, 0x02, 0x01},	// 25, -12.5dB
++	{0x0c, 0x0c, 0x0a, 0x09, 0x06, 0x04, 0x02, 0x01},	// 26, -13.0dB
++	{0x0b, 0x0b, 0x0a, 0x08, 0x06, 0x04, 0x02, 0x01},	// 27, -13.5dB
++	{0x0b, 0x0a, 0x09, 0x08, 0x06, 0x04, 0x02, 0x01},	// 28, -14.0dB
++	{0x0a, 0x0a, 0x09, 0x07, 0x05, 0x03, 0x02, 0x01},	// 29, -14.5dB
++	{0x0a, 0x09, 0x08, 0x07, 0x05, 0x03, 0x02, 0x01},	// 30, -15.0dB
++	{0x09, 0x09, 0x08, 0x06, 0x05, 0x03, 0x01, 0x01},	// 31, -15.5dB
++	{0x09, 0x08, 0x07, 0x06, 0x04, 0x03, 0x01, 0x01}	// 32, -16.0dB
++};
++
++
++u8 CCKSwingTable_Ch14 [CCK_TABLE_SIZE][8]= {
++	{0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00},	// 0, +0dB	
++	{0x33, 0x32, 0x2b, 0x19, 0x00, 0x00, 0x00, 0x00},	// 1, -0.5dB 
++	{0x30, 0x2f, 0x29, 0x18, 0x00, 0x00, 0x00, 0x00},	// 2, -1.0dB  
++	{0x2d, 0x2d, 0x17, 0x17, 0x00, 0x00, 0x00, 0x00},	// 3, -1.5dB
++	{0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00},	// 4, -2.0dB  
++	{0x28, 0x28, 0x24, 0x14, 0x00, 0x00, 0x00, 0x00},	// 5, -2.5dB
++	{0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00},	// 6, -3.0dB  
++	{0x24, 0x23, 0x1f, 0x12, 0x00, 0x00, 0x00, 0x00},	// 7, -3.5dB  
++	{0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00},	// 8, -4.0dB  
++	{0x20, 0x20, 0x1b, 0x10, 0x00, 0x00, 0x00, 0x00},	// 9, -4.5dB
++	{0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00},	// 10, -5.0dB  
++	{0x1d, 0x1c, 0x18, 0x0e, 0x00, 0x00, 0x00, 0x00},	// 11, -5.5dB
++	{0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00},	// 12, -6.0dB  
++	{0x1a, 0x19, 0x16, 0x0d, 0x00, 0x00, 0x00, 0x00},	// 13, -6.5dB 
++	{0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00},	// 14, -7.0dB  
++	{0x17, 0x16, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x00},	// 15, -7.5dB
++	{0x16, 0x15, 0x12, 0x0b, 0x00, 0x00, 0x00, 0x00},	// 16, -8.0dB  
++	{0x14, 0x14, 0x11, 0x0a, 0x00, 0x00, 0x00, 0x00},	// 17, -8.5dB
++	{0x13, 0x13, 0x10, 0x0a, 0x00, 0x00, 0x00, 0x00},	// 18, -9.0dB  
++	{0x12, 0x12, 0x0f, 0x09, 0x00, 0x00, 0x00, 0x00},	// 19, -9.5dB
++	{0x11, 0x11, 0x0f, 0x09, 0x00, 0x00, 0x00, 0x00},	// 20, -10.0dB
++	{0x10, 0x10, 0x0e, 0x08, 0x00, 0x00, 0x00, 0x00},	// 21, -10.5dB
++	{0x0f, 0x0f, 0x0d, 0x08, 0x00, 0x00, 0x00, 0x00},	// 22, -11.0dB
++	{0x0e, 0x0e, 0x0c, 0x07, 0x00, 0x00, 0x00, 0x00},	// 23, -11.5dB
++	{0x0d, 0x0d, 0x0c, 0x07, 0x00, 0x00, 0x00, 0x00},	// 24, -12.0dB
++	{0x0d, 0x0c, 0x0b, 0x06, 0x00, 0x00, 0x00, 0x00},	// 25, -12.5dB
++	{0x0c, 0x0c, 0x0a, 0x06, 0x00, 0x00, 0x00, 0x00},	// 26, -13.0dB
++	{0x0b, 0x0b, 0x0a, 0x06, 0x00, 0x00, 0x00, 0x00},	// 27, -13.5dB
++	{0x0b, 0x0a, 0x09, 0x05, 0x00, 0x00, 0x00, 0x00},	// 28, -14.0dB
++	{0x0a, 0x0a, 0x09, 0x05, 0x00, 0x00, 0x00, 0x00},	// 29, -14.5dB
++	{0x0a, 0x09, 0x08, 0x05, 0x00, 0x00, 0x00, 0x00},	// 30, -15.0dB
++	{0x09, 0x09, 0x08, 0x05, 0x00, 0x00, 0x00, 0x00},	// 31, -15.5dB
++	{0x09, 0x08, 0x07, 0x04, 0x00, 0x00, 0x00, 0x00}	// 32, -16.0dB
++};	
++
++
++#ifdef CONFIG_CHIP_VER_INTEGRATION
++void dump_chip_info(HAL_VERSION	ChipVersion)
++{
++	if(IS_81XXC(ChipVersion)){
++		DBG_871X("Chip Version Info: %s_",IS_92C_SERIAL(ChipVersion)?"CHIP_8192C":"CHIP_8188C");
++	}
++	else if(IS_92D(ChipVersion)){
++		DBG_871X("Chip Version Info: CHIP_8192D_");
++	}
++	else if(IS_8723_SERIES(ChipVersion)){
++		DBG_871X("Chip Version Info: CHIP_8723A_");
++	}
++	else if(IS_8188E(ChipVersion)){
++		DBG_871X("Chip Version Info: CHIP_8188E_");
++	}
++
++	DBG_871X("%s_",IS_NORMAL_CHIP(ChipVersion)?"Normal_Chip":"Test_Chip");	
++	DBG_871X("%s_",IS_CHIP_VENDOR_TSMC(ChipVersion)?"TSMC":"UMC");
++	if(IS_A_CUT(ChipVersion)) DBG_871X("A_CUT_");	
++	else if(IS_B_CUT(ChipVersion)) DBG_871X("B_CUT_");	
++	else if(IS_C_CUT(ChipVersion)) DBG_871X("C_CUT_");	
++	else if(IS_D_CUT(ChipVersion)) DBG_871X("D_CUT_");	
++	else if(IS_E_CUT(ChipVersion)) DBG_871X("E_CUT_");	
++	else DBG_871X("UNKNOWN_CUT(%d)_",ChipVersion.CUTVersion);
++	
++	if(IS_1T1R(ChipVersion))	DBG_871X("1T1R_");	
++	else if(IS_1T2R(ChipVersion))	DBG_871X("1T2R_");	
++	else if(IS_2T2R(ChipVersion))	DBG_871X("2T2R_");
++	else DBG_871X("UNKNOWN_RFTYPE(%d)_",ChipVersion.RFType);
++
++	
++	DBG_871X("RomVer(%d)\n",ChipVersion.ROMVer);	
++}
++
++#endif
++
++#define	EEPROM_CHANNEL_PLAN_BY_HW_MASK	0x80
++
++u8	//return the final channel plan decision
++hal_com_get_channel_plan(
++	IN	PADAPTER	padapter,
++	IN	u8			hw_channel_plan,	//channel plan from HW (efuse/eeprom)
++	IN	u8			sw_channel_plan,	//channel plan from SW (registry/module param)
++	IN	u8			def_channel_plan,	//channel plan used when the former two is invalid
++	IN	BOOLEAN		AutoLoadFail
++	)
++{
++	u8 swConfig;
++	u8 chnlPlan;
++
++	swConfig = _TRUE;
++	if (!AutoLoadFail)
++	{
++		if (!rtw_is_channel_plan_valid(sw_channel_plan))
++			swConfig = _FALSE;
++		if (hw_channel_plan & EEPROM_CHANNEL_PLAN_BY_HW_MASK)
++			swConfig = _FALSE;
++	}
++
++	if (swConfig == _TRUE)
++		chnlPlan = sw_channel_plan;
++	else
++		chnlPlan = hw_channel_plan & (~EEPROM_CHANNEL_PLAN_BY_HW_MASK);
++
++	if (!rtw_is_channel_plan_valid(chnlPlan))
++		chnlPlan = def_channel_plan;
++
++	return chnlPlan;
++}
++
++u8	MRateToHwRate(u8 rate)
++{
++	u8	ret = DESC_RATE1M;
++		
++	switch(rate)
++	{
++		// CCK and OFDM non-HT rates
++	case IEEE80211_CCK_RATE_1MB:	ret = DESC_RATE1M;	break;
++	case IEEE80211_CCK_RATE_2MB:	ret = DESC_RATE2M;	break;
++	case IEEE80211_CCK_RATE_5MB:	ret = DESC_RATE5_5M;	break;
++	case IEEE80211_CCK_RATE_11MB:	ret = DESC_RATE11M;	break;
++	case IEEE80211_OFDM_RATE_6MB:	ret = DESC_RATE6M;	break;
++	case IEEE80211_OFDM_RATE_9MB:	ret = DESC_RATE9M;	break;
++	case IEEE80211_OFDM_RATE_12MB:	ret = DESC_RATE12M;	break;
++	case IEEE80211_OFDM_RATE_18MB:	ret = DESC_RATE18M;	break;
++	case IEEE80211_OFDM_RATE_24MB:	ret = DESC_RATE24M;	break;
++	case IEEE80211_OFDM_RATE_36MB:	ret = DESC_RATE36M;	break;
++	case IEEE80211_OFDM_RATE_48MB:	ret = DESC_RATE48M;	break;
++	case IEEE80211_OFDM_RATE_54MB:	ret = DESC_RATE54M;	break;
++
++		// HT rates since here
++	//case MGN_MCS0:		ret = DESC_RATEMCS0;	break;
++	//case MGN_MCS1:		ret = DESC_RATEMCS1;	break;
++	//case MGN_MCS2:		ret = DESC_RATEMCS2;	break;
++	//case MGN_MCS3:		ret = DESC_RATEMCS3;	break;
++	//case MGN_MCS4:		ret = DESC_RATEMCS4;	break;
++	//case MGN_MCS5:		ret = DESC_RATEMCS5;	break;
++	//case MGN_MCS6:		ret = DESC_RATEMCS6;	break;
++	//case MGN_MCS7:		ret = DESC_RATEMCS7;	break;
++
++	default:		break;
++	}
++
++	return ret;
++}
++
++void	HalSetBrateCfg(
++	IN PADAPTER		Adapter,
++	IN u8			*mBratesOS,
++	OUT u16			*pBrateCfg)
++{
++	u8	i, is_brate, brate;
++
++	for(i=0;i<NDIS_802_11_LENGTH_RATES_EX;i++)
++	{
++		is_brate = mBratesOS[i] & IEEE80211_BASIC_RATE_MASK;
++		brate = mBratesOS[i] & 0x7f;
++		
++		if( is_brate )
++		{		
++			switch(brate)
++			{
++				case IEEE80211_CCK_RATE_1MB:	*pBrateCfg |= RATE_1M;	break;
++				case IEEE80211_CCK_RATE_2MB:	*pBrateCfg |= RATE_2M;	break;
++				case IEEE80211_CCK_RATE_5MB:	*pBrateCfg |= RATE_5_5M;break;
++				case IEEE80211_CCK_RATE_11MB:	*pBrateCfg |= RATE_11M;	break;
++				case IEEE80211_OFDM_RATE_6MB:	*pBrateCfg |= RATE_6M;	break;
++				case IEEE80211_OFDM_RATE_9MB:	*pBrateCfg |= RATE_9M;	break;
++				case IEEE80211_OFDM_RATE_12MB:	*pBrateCfg |= RATE_12M;	break;
++				case IEEE80211_OFDM_RATE_18MB:	*pBrateCfg |= RATE_18M;	break;
++				case IEEE80211_OFDM_RATE_24MB:	*pBrateCfg |= RATE_24M;	break;
++				case IEEE80211_OFDM_RATE_36MB:	*pBrateCfg |= RATE_36M;	break;
++				case IEEE80211_OFDM_RATE_48MB:	*pBrateCfg |= RATE_48M;	break;
++				case IEEE80211_OFDM_RATE_54MB:	*pBrateCfg |= RATE_54M;	break;
++			}
++		}
++	}
++}
++
++void hal_init_macaddr(_adapter *adapter)
++{
++	rtw_hal_set_hwreg(adapter, HW_VAR_MAC_ADDR, adapter->eeprompriv.mac_addr);
++#ifdef  CONFIG_CONCURRENT_MODE
++	if (adapter->pbuddy_adapter)
++		rtw_hal_set_hwreg(adapter->pbuddy_adapter, HW_VAR_MAC_ADDR, adapter->pbuddy_adapter->eeprompriv.mac_addr);
++#endif
++}
++
++/* 
++* C2H event format:
++* Field	 TRIGGER		CONTENT	   CMD_SEQ 	CMD_LEN		 CMD_ID
++* BITS	 [127:120]	[119:16]      [15:8]		  [7:4]	 	   [3:0]
++*/
++
++void c2h_evt_clear(_adapter *adapter)
++{
++	rtw_write8(adapter, REG_C2HEVT_CLEAR, C2H_EVT_HOST_CLOSE);
++}
++
++s32 c2h_evt_read(_adapter *adapter, u8 *buf)
++{
++	s32 ret = _FAIL;
++	struct c2h_evt_hdr *c2h_evt;
++	int i;
++	u8 trigger;
++
++	if (buf == NULL)
++		goto exit;
++
++	trigger = rtw_read8(adapter, REG_C2HEVT_CLEAR);
++
++	if (trigger == C2H_EVT_HOST_CLOSE) {
++		goto exit; /* Not ready */
++	} else if (trigger != C2H_EVT_FW_CLOSE) {
++		goto clear_evt; /* Not a valid value */
++	}
++
++	c2h_evt = (struct c2h_evt_hdr *)buf;
++
++	_rtw_memset(c2h_evt, 0, 16);
++
++	*buf = rtw_read8(adapter, REG_C2HEVT_MSG_NORMAL);
++	*(buf+1) = rtw_read8(adapter, REG_C2HEVT_MSG_NORMAL + 1);	
++
++	RT_PRINT_DATA(_module_hal_init_c_, _drv_info_, "c2h_evt_read(): ",
++		&c2h_evt , sizeof(c2h_evt));
++
++	if (0) {
++		DBG_871X("%s id:%u, len:%u, seq:%u, trigger:0x%02x\n", __func__
++			, c2h_evt->id, c2h_evt->plen, c2h_evt->seq, trigger);
++	}
++
++	/* Read the content */
++	for (i = 0; i < c2h_evt->plen; i++)
++		c2h_evt->payload[i] = rtw_read8(adapter, REG_C2HEVT_MSG_NORMAL + sizeof(*c2h_evt) + i);
++
++	RT_PRINT_DATA(_module_hal_init_c_, _drv_info_, "c2h_evt_read(): Command Content:\n",
++		c2h_evt->payload, c2h_evt->plen);
++
++	ret = _SUCCESS;
++
++clear_evt:
++	/* 
++	* Clear event to notify FW we have read the command.
++	* If this field isn't clear, the FW won't update the next command message.
++	*/
++	c2h_evt_clear(adapter);
++exit:
++	return ret;
++}
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/hal_intf.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/hal_intf.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/hal_intf.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/hal_intf.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,546 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++
++#define _HAL_INTF_C_
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <rtw_byteorder.h>
++
++#include <hal_intf.h>
++
++#ifdef CONFIG_SDIO_HCI
++	#include <sdio_hal.h>
++#elif defined(CONFIG_USB_HCI)
++	#include <usb_hal.h>
++#elif defined(CONFIG_GSPI_HCI)
++	#include <gspi_hal.h>
++#endif
++
++void rtw_hal_chip_configure(_adapter *padapter)
++{
++	if(padapter->HalFunc.intf_chip_configure)
++		padapter->HalFunc.intf_chip_configure(padapter);
++}
++
++void rtw_hal_read_chip_info(_adapter *padapter)
++{
++	if(padapter->HalFunc.read_adapter_info)
++		padapter->HalFunc.read_adapter_info(padapter);
++}
++
++void rtw_hal_read_chip_version(_adapter *padapter)
++{
++	if(padapter->HalFunc.read_chip_version)
++		padapter->HalFunc.read_chip_version(padapter);
++}
++
++void rtw_hal_def_value_init(_adapter *padapter)
++{
++	if(padapter->HalFunc.init_default_value)
++		padapter->HalFunc.init_default_value(padapter);
++}
++
++void rtw_hal_free_data(_adapter *padapter)
++{
++	if(padapter->HalFunc.free_hal_data)
++		padapter->HalFunc.free_hal_data(padapter);
++}
++
++void rtw_hal_dm_init(_adapter *padapter)
++{
++	if(padapter->HalFunc.dm_init)
++		padapter->HalFunc.dm_init(padapter);
++}
++
++void rtw_hal_dm_deinit(_adapter *padapter)
++{
++	// cancel dm  timer
++	if(padapter->HalFunc.dm_deinit)
++		padapter->HalFunc.dm_deinit(padapter);	
++}
++
++void rtw_hal_sw_led_init(_adapter *padapter)
++{
++	if(padapter->HalFunc.InitSwLeds)
++		padapter->HalFunc.InitSwLeds(padapter);
++}
++
++void rtw_hal_sw_led_deinit(_adapter *padapter)
++{
++	if(padapter->HalFunc.DeInitSwLeds)
++		padapter->HalFunc.DeInitSwLeds(padapter);
++}
++
++uint	 rtw_hal_init(_adapter *padapter) 
++{
++	uint	status = _SUCCESS;
++
++	if(padapter->hw_init_completed == _TRUE)
++	{
++		DBG_871X("rtw_hal_init: hw_init_completed == _TRUE\n");
++		goto success;
++	}
++#ifdef CONFIG_DEINIT_BEFORE_INIT
++	status = padapter->HalFunc.hal_deinit(padapter);
++	if(status != _SUCCESS){
++		DBG_871X("rtw_hal_init: hal_deinit before hal_init FAIL !!\n");
++		goto fail;
++	}
++#endif
++	
++#ifdef CONFIG_DUALMAC_CONCURRENT
++	// before init mac0, driver must init mac1 first to avoid usb rx error.
++	if((padapter->pbuddy_adapter != NULL) && (padapter->DualMacConcurrent == _TRUE)
++		&& (padapter->adapter_type == PRIMARY_ADAPTER))
++	{
++		if(padapter->pbuddy_adapter->hw_init_completed == _TRUE)
++		{
++			DBG_871X("rtw_hal_init: pbuddy_adapter hw_init_completed == _TRUE\n");
++		}
++		else
++		{
++#ifdef CONFIG_DEINIT_BEFORE_INIT
++			status = padapter->HalFunc.hal_deinit(padapter->pbuddy_adapter);
++			if(status != _SUCCESS){
++				DBG_871X("rtw_hal_init: hal_deinit before hal_init FAIL !!(pbuddy_adapter)\n");
++				goto fail;
++			}
++#endif
++			status = 	padapter->HalFunc.hal_init(padapter->pbuddy_adapter);
++			if(status == _SUCCESS){
++				padapter->pbuddy_adapter->hw_init_completed = _TRUE;
++			}
++			else{
++			 	padapter->pbuddy_adapter->hw_init_completed = _FALSE;
++				RT_TRACE(_module_hal_init_c_,_drv_err_,("rtw_hal_init: hal__init fail(pbuddy_adapter)\n"));
++				goto fail;
++			}
++		}
++	}
++#else
++	if(adapter_to_dvobj(padapter)->DualMacMode == _TRUE)
++	{
++		if(padapter->pbuddy_adapter != NULL) {
++			if(padapter->pbuddy_adapter->hw_init_completed == _FALSE)
++			{
++#ifdef CONFIG_DEINIT_BEFORE_INIT
++				status = padapter->HalFunc.hal_deinit(padapter->pbuddy_adapter);
++				if(status != _SUCCESS){
++					DBG_871X("rtw_hal_init: hal_deinit before hal_init FAIL !!(pbuddy_adapter)\n");
++					goto fail;
++				}
++#endif
++				status = padapter->HalFunc.hal_init(padapter->pbuddy_adapter);
++				if(status == _SUCCESS){
++					padapter->pbuddy_adapter->hw_init_completed = _TRUE;
++				}
++				else{
++					padapter->pbuddy_adapter->hw_init_completed = _FALSE;
++					RT_TRACE(_module_hal_init_c_,_drv_err_,("rtw_hal_init: hal__init fail for another interface\n"));
++				}
++			}
++		}
++	}
++#endif
++
++	padapter->hw_init_completed=_FALSE;
++
++	status = padapter->HalFunc.hal_init(padapter);
++
++	if(status == _SUCCESS){
++		padapter->hw_init_completed = _TRUE;
++	}
++	else{
++	 	padapter->hw_init_completed = _FALSE;
++		RT_TRACE(_module_hal_init_c_,_drv_err_,("rtw_hal_init: hal__init fail\n"));
++		goto fail;
++	}
++
++success:
++
++	if (padapter->registrypriv.notch_filter == 1)
++		rtw_hal_notch_filter(padapter, 1);
++
++	rtw_hal_reset_security_engine(padapter);
++
++	rtw_sec_restore_wep_key(padapter);
++
++	init_hw_mlme_ext(padapter);
++
++fail:
++
++	RT_TRACE(_module_hal_init_c_,_drv_err_,("-rtl871x_hal_init:status=0x%x\n",status));
++
++	return status;
++}	
++
++uint rtw_hal_deinit(_adapter *padapter)
++{
++	uint	status = _SUCCESS;
++	
++_func_enter_;
++
++	status = padapter->HalFunc.hal_deinit(padapter);
++
++	if(status == _SUCCESS){
++		padapter->hw_init_completed = _FALSE;
++	}
++	else
++	{
++		RT_TRACE(_module_hal_init_c_,_drv_err_,("\n rtw_hal_deinit: hal_init fail\n"));
++	}
++	
++_func_exit_;
++	
++	return status;
++}
++
++void rtw_hal_set_hwreg(_adapter *padapter, u8 variable, u8 *val)
++{
++	if (padapter->HalFunc.SetHwRegHandler)
++		padapter->HalFunc.SetHwRegHandler(padapter, variable, val);
++}
++
++void rtw_hal_get_hwreg(_adapter *padapter, u8 variable, u8 *val)
++{
++	if (padapter->HalFunc.GetHwRegHandler)
++		padapter->HalFunc.GetHwRegHandler(padapter, variable, val);
++}
++
++u8 rtw_hal_set_def_var(_adapter *padapter, HAL_DEF_VARIABLE eVariable, PVOID pValue)
++{	
++	if(padapter->HalFunc.SetHalDefVarHandler)
++		return padapter->HalFunc.SetHalDefVarHandler(padapter,eVariable,pValue);
++	return _FAIL;
++}
++
++u8 rtw_hal_get_def_var(_adapter *padapter, HAL_DEF_VARIABLE eVariable, PVOID pValue)
++{	
++	if(padapter->HalFunc.GetHalDefVarHandler)
++		return padapter->HalFunc.GetHalDefVarHandler(padapter,eVariable,pValue);
++	return _FAIL;	
++}
++
++void rtw_hal_enable_interrupt(_adapter *padapter)
++{
++	if (padapter->HalFunc.enable_interrupt)
++		padapter->HalFunc.enable_interrupt(padapter);
++	else 
++		DBG_871X("%s: HalFunc.enable_interrupt is NULL!\n", __FUNCTION__);
++	
++}
++void rtw_hal_disable_interrupt(_adapter *padapter)
++{
++	if (padapter->HalFunc.disable_interrupt)
++		padapter->HalFunc.disable_interrupt(padapter);
++	else 
++		DBG_871X("%s: HalFunc.disable_interrupt is NULL!\n", __FUNCTION__);
++	
++}
++
++u32	rtw_hal_inirp_init(_adapter *padapter)
++{
++	u32 rst = _FAIL;
++	if(padapter->HalFunc.inirp_init)	
++		rst = padapter->HalFunc.inirp_init(padapter);	
++	else		
++		DBG_871X(" %s HalFunc.inirp_init is NULL!!!\n",__FUNCTION__);		
++	return rst;
++}
++	
++u32	rtw_hal_inirp_deinit(_adapter *padapter)
++{
++	
++	if(padapter->HalFunc.inirp_deinit)
++		return padapter->HalFunc.inirp_deinit(padapter);
++
++	return _FAIL;
++		
++}
++
++u8 rtw_hal_intf_ps_func(_adapter *padapter,HAL_INTF_PS_FUNC efunc_id, u8* val)
++{
++	if(padapter->HalFunc.interface_ps_func)
++		return padapter->HalFunc.interface_ps_func(padapter,efunc_id,val);
++	return _FAIL;
++}
++
++s32	rtw_hal_xmitframe_enqueue(_adapter *padapter, struct xmit_frame *pxmitframe)
++{
++	if(padapter->HalFunc.hal_xmitframe_enqueue)
++		return padapter->HalFunc.hal_xmitframe_enqueue(padapter, pxmitframe);
++
++	return _FALSE;	
++}
++
++s32 rtw_hal_xmit(_adapter *padapter, struct xmit_frame *pxmitframe)
++{
++	if(padapter->HalFunc.hal_xmit)
++		return padapter->HalFunc.hal_xmit(padapter, pxmitframe);
++
++	return _FALSE;
++}
++
++s32	rtw_hal_mgnt_xmit(_adapter *padapter, struct xmit_frame *pmgntframe)
++{
++	s32 ret = _FAIL;
++	unsigned char	*pframe;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++	_rtw_memcpy(pmgntframe->attrib.ra, pwlanhdr->addr1, ETH_ALEN);
++
++#ifdef CONFIG_IEEE80211W
++	if(padapter->securitypriv.binstallBIPkey == _TRUE)
++	{
++		if(IS_MCAST(pmgntframe->attrib.ra))
++		{
++			pmgntframe->attrib.encrypt = _BIP_;
++			//pmgntframe->attrib.bswenc = _TRUE;
++		}	
++		else
++		{
++			pmgntframe->attrib.encrypt = _AES_;
++			pmgntframe->attrib.bswenc = _TRUE;
++		}
++		rtw_mgmt_xmitframe_coalesce(padapter, pmgntframe->pkt, pmgntframe);
++	}
++#endif //CONFIG_IEEE80211W
++	
++	if(padapter->HalFunc.mgnt_xmit)
++		ret = padapter->HalFunc.mgnt_xmit(padapter, pmgntframe);
++	return ret;
++}
++
++s32 rtw_hal_init_xmit_priv(_adapter *padapter)
++{
++	if(padapter->HalFunc.init_xmit_priv != NULL)
++		return padapter->HalFunc.init_xmit_priv(padapter);
++	return _FAIL;
++}
++
++void rtw_hal_free_xmit_priv(_adapter *padapter)
++{
++	if(padapter->HalFunc.free_xmit_priv != NULL)
++		padapter->HalFunc.free_xmit_priv(padapter);
++}
++
++s32 rtw_hal_init_recv_priv(_adapter *padapter)
++{
++	if(padapter->HalFunc.init_recv_priv)
++		return padapter->HalFunc.init_recv_priv(padapter);
++
++	return _FAIL;
++}
++
++void rtw_hal_free_recv_priv(_adapter *padapter)
++{	
++	if(padapter->HalFunc.free_recv_priv)
++		padapter->HalFunc.free_recv_priv(padapter);
++}
++
++void rtw_hal_update_ra_mask(_adapter *padapter, u32 mac_id)
++{
++	if(padapter->HalFunc.UpdateRAMaskHandler)
++		padapter->HalFunc.UpdateRAMaskHandler(padapter,mac_id);
++}
++
++void rtw_hal_add_ra_tid(_adapter *padapter, u32 bitmap, u8 arg)
++{
++	if(padapter->HalFunc.Add_RateATid)
++		padapter->HalFunc.Add_RateATid(padapter, bitmap, arg);
++}
++
++u32 rtw_hal_read_bbreg(_adapter *padapter, u32 RegAddr, u32 BitMask)
++{
++	u32 data = 0;
++	if (padapter->HalFunc.read_bbreg)
++		data = padapter->HalFunc.read_bbreg(padapter, RegAddr, BitMask);
++	return data;
++}
++
++void rtw_hal_write_bbreg(_adapter *padapter, u32 RegAddr, u32 BitMask, u32 Data)
++{
++	if (padapter->HalFunc.write_bbreg)
++		padapter->HalFunc.write_bbreg(padapter, RegAddr, BitMask, Data);
++}
++
++u32 rtw_hal_read_rfreg(_adapter *padapter, u32 eRFPath, u32 RegAddr, u32 BitMask)
++{
++	u32 data = 0;
++	if (padapter->HalFunc.read_rfreg)
++		data = padapter->HalFunc.read_rfreg(padapter, eRFPath, RegAddr, BitMask);
++	return data;
++}
++
++void rtw_hal_write_rfreg(_adapter *padapter, u32 eRFPath, u32 RegAddr, u32 BitMask, u32 Data)
++{
++	if (padapter->HalFunc.write_rfreg)
++		padapter->HalFunc.write_rfreg(padapter, eRFPath, RegAddr, BitMask, Data);
++}
++
++s32 rtw_hal_interrupt_handler(_adapter *padapter)
++{
++	if(padapter->HalFunc.interrupt_handler)
++		return padapter->HalFunc.interrupt_handler(padapter);
++	return _FAIL;
++}
++
++void rtw_hal_set_bwmode(_adapter *padapter, HT_CHANNEL_WIDTH Bandwidth, u8 Offset)
++{
++	if(padapter->HalFunc.set_bwmode_handler)
++		padapter->HalFunc.set_bwmode_handler(padapter, Bandwidth, Offset);
++}
++
++void rtw_hal_set_chan(_adapter *padapter, u8 channel)
++{
++	if(padapter->HalFunc.set_channel_handler)
++		padapter->HalFunc.set_channel_handler(padapter, channel);
++}
++
++void rtw_hal_dm_watchdog(_adapter *padapter)
++{
++	if(padapter->HalFunc.hal_dm_watchdog)
++		padapter->HalFunc.hal_dm_watchdog(padapter);
++}
++
++void rtw_hal_bcn_related_reg_setting(_adapter *padapter)
++{
++	if(padapter->HalFunc.SetBeaconRelatedRegistersHandler)
++		padapter->HalFunc.SetBeaconRelatedRegistersHandler(padapter);
++}
++
++#ifdef CONFIG_ANTENNA_DIVERSITY
++u8 rtw_hal_antdiv_before_linked(_adapter *padapter)
++{
++	if (padapter->HalFunc.AntDivBeforeLinkHandler)
++		return padapter->HalFunc.AntDivBeforeLinkHandler(padapter);
++	return _FALSE;
++}
++
++void rtw_hal_antdiv_rssi_compared(_adapter *padapter, WLAN_BSSID_EX *dst, WLAN_BSSID_EX *src)
++{
++	if (padapter->HalFunc.AntDivCompareHandler)
++		padapter->HalFunc.AntDivCompareHandler(padapter, dst, src);
++}
++#endif
++
++#ifdef CONFIG_HOSTAPD_MLME
++s32	rtw_hal_hostap_mgnt_xmit_entry(_adapter *padapter, _pkt *pkt)
++{
++	if (padapter->HalFunc.hostap_mgnt_xmit_entry)
++		return padapter->HalFunc.hostap_mgnt_xmit_entry(padapter, pkt);
++	return _FAIL;
++}
++#endif //CONFIG_HOSTAPD_MLME
++
++#ifdef DBG_CONFIG_ERROR_DETECT
++void rtw_hal_sreset_init(_adapter *padapter)
++{
++	if(padapter->HalFunc.sreset_init_value)
++		padapter->HalFunc.sreset_init_value(padapter);
++}
++
++void rtw_hal_sreset_reset(_adapter *padapter)
++{
++	padapter = GET_PRIMARY_ADAPTER(padapter);
++
++	if(padapter->HalFunc.silentreset)
++		padapter->HalFunc.silentreset(padapter);
++}
++
++void rtw_hal_sreset_reset_value(_adapter *padapter)
++{
++	if(padapter->HalFunc.sreset_reset_value)
++		padapter->HalFunc.sreset_reset_value(padapter);
++}
++
++void rtw_hal_sreset_xmit_status_check(_adapter *padapter)
++{
++#ifdef CONFIG_CONCURRENT_MODE
++	if (padapter->adapter_type != PRIMARY_ADAPTER)
++		return;
++#endif
++	if(padapter->HalFunc.sreset_xmit_status_check)
++		padapter->HalFunc.sreset_xmit_status_check(padapter);
++}
++
++void rtw_hal_sreset_linked_status_check(_adapter *padapter)
++{
++	if(padapter->HalFunc.sreset_linked_status_check)
++		padapter->HalFunc.sreset_linked_status_check(padapter);
++}
++
++u8 rtw_hal_sreset_get_wifi_status(_adapter *padapter)
++{
++	u8 status = 0;
++	if(padapter->HalFunc.sreset_get_wifi_status)
++		status = padapter->HalFunc.sreset_get_wifi_status(padapter);
++	return status;
++}
++
++bool rtw_hal_sreset_inprogress(_adapter *padapter)
++{
++	bool inprogress = _FALSE;
++
++	padapter = GET_PRIMARY_ADAPTER(padapter);
++
++	if(padapter->HalFunc.sreset_inprogress)
++		inprogress = padapter->HalFunc.sreset_inprogress(padapter);
++	return inprogress;
++}
++#endif //DBG_CONFIG_ERROR_DETECT
++
++#ifdef CONFIG_IOL
++int rtw_hal_iol_cmd(ADAPTER *adapter, struct xmit_frame *xmit_frame, u32 max_wating_ms)
++{
++	if (adapter->HalFunc.IOL_exec_cmds_sync)
++		return adapter->HalFunc.IOL_exec_cmds_sync(adapter, xmit_frame, max_wating_ms);
++	return _FAIL;
++}
++#endif
++
++void rtw_hal_notch_filter(_adapter *adapter, bool enable)
++{
++	if(adapter->HalFunc.hal_notch_filter)
++		adapter->HalFunc.hal_notch_filter(adapter,enable);
++}
++
++void rtw_hal_reset_security_engine(_adapter * adapter)
++{
++	if(adapter->HalFunc.hal_reset_security_engine)
++		adapter->HalFunc.hal_reset_security_engine(adapter);
++}
++
++s32 rtw_hal_c2h_handler(_adapter *adapter, struct c2h_evt_hdr *c2h_evt)
++{
++	s32 ret = _FAIL;
++	if (adapter->HalFunc.c2h_handler)
++		ret = adapter->HalFunc.c2h_handler(adapter, c2h_evt);
++	return ret;
++}
++
++c2h_id_filter rtw_hal_c2h_id_filter_ccx(_adapter *adapter)
++{
++	return adapter->HalFunc.c2h_id_filter_ccx;
++}
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/HalPwrSeqCmd.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/HalPwrSeqCmd.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/HalPwrSeqCmd.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/HalPwrSeqCmd.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,177 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++/*++
++Copyright (c) Realtek Semiconductor Corp. All rights reserved.
++
++Module Name:
++	HalPwrSeqCmd.c
++
++Abstract:
++	Implement HW Power sequence configuration CMD handling routine for Realtek devices.
++
++Major Change History:
++	When       Who               What
++	---------- ---------------   -------------------------------
++	2011-10-26 Lucas            Modify to be compatible with SD4-CE driver.
++	2011-07-07 Roger            Create.
++
++--*/
++#include <HalPwrSeqCmd.h>
++#include <sdio_ops.h>
++
++
++//
++//	Description:
++//		This routine deal with the Power Configuration CMDs parsing for RTL8723/RTL8188E Series IC.
++//
++//	Assumption:
++//		We should follow specific format which was released from HW SD.
++//
++//	2011.07.07, added by Roger.
++//
++u8 HalPwrSeqCmdParsing(
++	PADAPTER		padapter,
++	u8				CutVersion,
++	u8				FabVersion,
++	u8				InterfaceType,
++	WLAN_PWR_CFG	PwrSeqCmd[])
++{
++	WLAN_PWR_CFG 	PwrCfgCmd = {0};
++	u8				bPollingBit = _FALSE;
++	u32				AryIdx = 0;
++	u8				value = 0;
++	u32				offset = 0;
++	u32				pollingCount = 0; // polling autoload done.
++	u32				maxPollingCnt = 5000;
++
++	do {
++		PwrCfgCmd = PwrSeqCmd[AryIdx];
++
++		RT_TRACE(_module_hal_init_c_ , _drv_info_,
++				 ("HalPwrSeqCmdParsing: offset(%#x) cut_msk(%#x) fab_msk(%#x) interface_msk(%#x) base(%#x) cmd(%#x) msk(%#x) value(%#x)\n",
++					GET_PWR_CFG_OFFSET(PwrCfgCmd),
++					GET_PWR_CFG_CUT_MASK(PwrCfgCmd),
++					GET_PWR_CFG_FAB_MASK(PwrCfgCmd),
++					GET_PWR_CFG_INTF_MASK(PwrCfgCmd),
++					GET_PWR_CFG_BASE(PwrCfgCmd),
++					GET_PWR_CFG_CMD(PwrCfgCmd),
++					GET_PWR_CFG_MASK(PwrCfgCmd),
++					GET_PWR_CFG_VALUE(PwrCfgCmd)));
++
++		//2 Only Handle the command whose FAB, CUT, and Interface are matched
++		if ((GET_PWR_CFG_FAB_MASK(PwrCfgCmd) & FabVersion) &&
++			(GET_PWR_CFG_CUT_MASK(PwrCfgCmd) & CutVersion) &&
++			(GET_PWR_CFG_INTF_MASK(PwrCfgCmd) & InterfaceType))
++		{
++			switch (GET_PWR_CFG_CMD(PwrCfgCmd))
++			{
++				case PWR_CMD_READ:
++					RT_TRACE(_module_hal_init_c_ , _drv_info_, ("HalPwrSeqCmdParsing: PWR_CMD_READ\n"));
++					break;
++
++				case PWR_CMD_WRITE:
++					RT_TRACE(_module_hal_init_c_ , _drv_info_, ("HalPwrSeqCmdParsing: PWR_CMD_WRITE\n"));
++					offset = GET_PWR_CFG_OFFSET(PwrCfgCmd);
++
++#ifdef CONFIG_SDIO_HCI
++					//
++					// <Roger_Notes> We should deal with interface specific address mapping for some interfaces, e.g., SDIO interface
++					// 2011.07.07.
++					//
++					if (GET_PWR_CFG_BASE(PwrCfgCmd) == PWR_BASEADDR_SDIO)
++					{
++						// Read Back SDIO Local value
++						value = SdioLocalCmd52Read1Byte(padapter, offset);
++
++						value &= ~(GET_PWR_CFG_MASK(PwrCfgCmd));
++						value |= (GET_PWR_CFG_VALUE(PwrCfgCmd) & GET_PWR_CFG_MASK(PwrCfgCmd));
++
++						// Write Back SDIO Local value
++						SdioLocalCmd52Write1Byte(padapter, offset, value);
++					}
++					else
++#endif
++					{
++						// Read the value from system register
++						value = rtw_read8(padapter, offset);
++
++						value &= ~(GET_PWR_CFG_MASK(PwrCfgCmd));
++						value |= (GET_PWR_CFG_VALUE(PwrCfgCmd) & GET_PWR_CFG_MASK(PwrCfgCmd));
++
++						// Write the value back to sytem register
++						rtw_write8(padapter, offset, value);
++					}
++					break;
++
++				case PWR_CMD_POLLING:
++					RT_TRACE(_module_hal_init_c_ , _drv_info_, ("HalPwrSeqCmdParsing: PWR_CMD_POLLING\n"));
++
++					bPollingBit = _FALSE;
++					offset = GET_PWR_CFG_OFFSET(PwrCfgCmd);
++
++					do {
++#ifdef CONFIG_SDIO_HCI
++						if (GET_PWR_CFG_BASE(PwrCfgCmd) == PWR_BASEADDR_SDIO)
++							value = SdioLocalCmd52Read1Byte(padapter, offset);
++						else
++#endif
++							value = rtw_read8(padapter, offset);
++
++						value &= GET_PWR_CFG_MASK(PwrCfgCmd);
++						if (value == (GET_PWR_CFG_VALUE(PwrCfgCmd) & GET_PWR_CFG_MASK(PwrCfgCmd)))
++							bPollingBit = _TRUE;
++						else
++							rtw_udelay_os(10);
++
++						if (pollingCount++ > maxPollingCnt) {
++							RT_TRACE(_module_hal_init_c_ , _drv_err_, ("Fail to polling Offset[%#x]\n", offset));
++							return _FALSE;
++						}
++					} while (!bPollingBit);
++
++					break;
++
++				case PWR_CMD_DELAY:
++					RT_TRACE(_module_hal_init_c_ , _drv_info_, ("HalPwrSeqCmdParsing: PWR_CMD_DELAY\n"));
++					if (GET_PWR_CFG_VALUE(PwrCfgCmd) == PWRSEQ_DELAY_US)
++						rtw_udelay_os(GET_PWR_CFG_OFFSET(PwrCfgCmd));
++					else
++						rtw_udelay_os(GET_PWR_CFG_OFFSET(PwrCfgCmd)*1000);
++					break;
++
++				case PWR_CMD_END:
++					// When this command is parsed, end the process
++					RT_TRACE(_module_hal_init_c_ , _drv_info_, ("HalPwrSeqCmdParsing: PWR_CMD_END\n"));
++					return _TRUE;
++					break;
++
++				default:
++					RT_TRACE(_module_hal_init_c_ , _drv_err_, ("HalPwrSeqCmdParsing: Unknown CMD!!\n"));
++					break;
++			}
++		}
++
++		AryIdx++;//Add Array Index
++	}while(1);
++
++	return _TRUE;
++}
++
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_cmd.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_cmd.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_cmd.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_cmd.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,1159 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _RTL8192C_CMD_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <recv_osdep.h>
++#include <cmd_osdep.h>
++#include <mlme_osdep.h>
++#include <rtw_byteorder.h>
++#include <circ_buf.h>
++#include <rtw_ioctl_set.h>
++
++#include <rtl8192c_hal.h>
++
++
++#define RTL92C_MAX_H2C_BOX_NUMS	4
++#define RTL92C_MAX_CMD_LEN	5
++#define MESSAGE_BOX_SIZE		4
++#define EX_MESSAGE_BOX_SIZE	2
++
++static u8 _is_fw_read_cmd_down(_adapter* padapter, u8 msgbox_num)
++{
++	u8	read_down = _FALSE;
++	int 	retry_cnts = 100;
++	
++	u8 valid;
++
++//	DBG_8192C(" _is_fw_read_cmd_down ,isnormal_chip(%x),reg_1cc(%x),msg_box(%d)...\n",isvern,rtw_read8(padapter,REG_HMETFR),msgbox_num);
++	
++	do{
++		valid = rtw_read8(padapter,REG_HMETFR) & BIT(msgbox_num);
++		if(0 == valid ){
++			read_down = _TRUE;
++		}			
++	}while( (!read_down) && (retry_cnts--));
++
++	return read_down;
++	
++}
++
++
++/*****************************************
++* H2C Msg format :
++*| 31 - 8		|7		| 6 - 0	|	
++*| h2c_msg 	|Ext_bit	|CMD_ID	|
++*
++******************************************/
++int rtl8192c_FillH2CCmd(_adapter* padapter, u8 ElementID, u32 CmdLen, u8* pCmdBuffer)
++{
++	u8	bcmd_down = _FALSE;
++	int 	retry_cnts = 100;
++	u8	h2c_box_num;
++	u32	msgbox_addr;
++	u32  msgbox_ex_addr;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++	u32	h2c_cmd = 0;
++	u16	h2c_cmd_ex = 0;
++	int ret = _FAIL;
++
++_func_enter_;	
++
++	padapter = GET_PRIMARY_ADAPTER(padapter);		
++	pHalData = GET_HAL_DATA(padapter);
++
++	if(padapter->bFWReady == _FALSE)
++	{
++		DBG_8192C("FillH2CCmd(): return H2C cmd because fw is not ready\n");
++		return ret;
++	}
++
++	_enter_critical_mutex(&(adapter_to_dvobj(padapter)->h2c_fwcmd_mutex), NULL);
++
++	if(!pCmdBuffer){
++		goto exit;
++	}
++	if(CmdLen > RTL92C_MAX_CMD_LEN){
++		goto exit;
++	}
++	//pay attention to if  race condition happened in  H2C cmd setting.
++	do{
++		h2c_box_num = pHalData->LastHMEBoxNum;
++
++		if(!_is_fw_read_cmd_down(padapter, h2c_box_num)){
++			DBG_8192C(" fw read cmd failed...\n");
++			goto exit;
++		}
++
++		if(CmdLen<=3)
++		{
++			_rtw_memcpy((u8*)(&h2c_cmd)+1, pCmdBuffer, CmdLen );
++		}
++		else{
++			_rtw_memcpy((u8*)(&h2c_cmd_ex), pCmdBuffer, EX_MESSAGE_BOX_SIZE);
++			_rtw_memcpy((u8*)(&h2c_cmd)+1, pCmdBuffer+2,( CmdLen-EX_MESSAGE_BOX_SIZE));
++			*(u8*)(&h2c_cmd) |= BIT(7);
++		}
++
++		*(u8*)(&h2c_cmd) |= ElementID;
++
++		if(h2c_cmd & BIT(7)){
++			msgbox_ex_addr = REG_HMEBOX_EXT_0 + (h2c_box_num *EX_MESSAGE_BOX_SIZE);
++			h2c_cmd_ex = cpu_to_le16( h2c_cmd_ex );
++			rtw_write16(padapter, msgbox_ex_addr, h2c_cmd_ex);
++		}
++		msgbox_addr =REG_HMEBOX_0 + (h2c_box_num *MESSAGE_BOX_SIZE);
++		h2c_cmd = cpu_to_le32( h2c_cmd );
++		rtw_write32(padapter,msgbox_addr, h2c_cmd);
++
++		bcmd_down = _TRUE;
++
++	//	DBG_8192C("MSG_BOX:%d,CmdLen(%d), reg:0x%x =>h2c_cmd:0x%x, reg:0x%x =>h2c_cmd_ex:0x%x ..\n"
++	//	 	,pHalData->LastHMEBoxNum ,CmdLen,msgbox_addr,h2c_cmd,msgbox_ex_addr,h2c_cmd_ex);
++
++		 pHalData->LastHMEBoxNum = (h2c_box_num+1) % RTL92C_MAX_H2C_BOX_NUMS ;
++
++	}while((!bcmd_down) && (retry_cnts--));
++/*
++	if(bcmd_down)
++		DBG_8192C("H2C Cmd exe down. \n"	);	
++	else
++		DBG_8192C("H2C Cmd exe failed. \n"	);
++*/
++	ret = _SUCCESS;
++
++exit:
++
++	_exit_critical_mutex(&(adapter_to_dvobj(padapter)->h2c_fwcmd_mutex), NULL);	
++
++_func_exit_;
++
++	return ret;
++
++}
++
++u8 rtl8192c_h2c_msg_hdl(_adapter *padapter, unsigned char *pbuf)
++{	
++	u8 ElementID, CmdLen;
++	u8 *pCmdBuffer;
++	struct cmd_msg_parm  *pcmdmsg;
++	
++	if(!pbuf)
++		return H2C_PARAMETERS_ERROR;
++
++	pcmdmsg = (struct cmd_msg_parm*)pbuf;
++	ElementID = pcmdmsg->eid;
++	CmdLen = pcmdmsg->sz;
++	pCmdBuffer = pcmdmsg->buf;
++
++	rtl8192c_FillH2CCmd(padapter, ElementID, CmdLen, pCmdBuffer);
++
++	return H2C_SUCCESS;
++}
++
++#if defined(CONFIG_AUTOSUSPEND) && defined(SUPPORT_HW_RFOFF_DETECTED)
++u8 rtl8192c_set_FwSelectSuspend_cmd(_adapter *padapter ,u8 bfwpoll, u16 period)
++{
++	u8	res=_SUCCESS;
++	struct H2C_SS_RFOFF_PARAM param;
++	DBG_8192C("==>%s bfwpoll(%x)\n",__FUNCTION__,bfwpoll);
++	param.gpio_period = period;//Polling GPIO_11 period time
++	param.ROFOn = (_TRUE == bfwpoll)?1:0;
++	rtl8192c_FillH2CCmd(padapter, SELECTIVE_SUSPEND_ROF_CMD, sizeof(param), (u8*)(&param));		
++	return res;
++}
++#endif //CONFIG_AUTOSUSPEND && SUPPORT_HW_RFOFF_DETECTED
++
++u8 rtl8192c_set_rssi_cmd(_adapter*padapter, u8 *param)
++{	
++	u8	res=_SUCCESS;
++
++_func_enter_;
++
++	*((u32*) param ) = cpu_to_le32( *((u32*) param ) );
++
++	rtl8192c_FillH2CCmd(padapter, RSSI_SETTING_EID, 3, param);
++
++_func_exit_;
++
++	return res;
++}
++
++u8 rtl8192c_set_raid_cmd(_adapter*padapter, u32 mask, u8 arg)
++{	
++	u8	buf[5];
++	u8	res=_SUCCESS;
++	
++_func_enter_;	
++	
++	_rtw_memset(buf, 0, 5);
++	mask = cpu_to_le32( mask );
++	_rtw_memcpy(buf, &mask, 4);
++	buf[4]  = arg;
++
++	rtl8192c_FillH2CCmd(padapter, MACID_CONFIG_EID, 5, buf);
++	
++_func_exit_;
++
++	return res;
++
++}
++
++//bitmap[0:27] = tx_rate_bitmap
++//bitmap[28:31]= Rate Adaptive id
++//arg[0:4] = macid
++//arg[5] = Short GI
++void rtl8192c_Add_RateATid(PADAPTER pAdapter, u32 bitmap, u8 arg)
++{	
++	
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++		
++	if(pHalData->fw_ractrl == _TRUE)
++	{
++		rtl8192c_set_raid_cmd(pAdapter, bitmap, arg);
++	}
++	else
++	{
++		u8 macid, init_rate, shortGIrate=_FALSE;
++
++		init_rate = get_highest_rate_idx(bitmap&0x0fffffff)&0x3f;
++		
++		macid = arg&0x1f;
++		
++		shortGIrate = (arg&BIT(5)) ? _TRUE:_FALSE;
++		
++		if (shortGIrate==_TRUE)
++			init_rate |= BIT(6);
++
++		rtw_write8(pAdapter, (REG_INIDATA_RATE_SEL+macid), (u8)init_rate);		
++	}
++
++}
++
++void rtl8192c_set_FwPwrMode_cmd(_adapter*padapter, u8 Mode)
++{
++	SETPWRMODE_PARM H2CSetPwrMode;
++	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
++	
++_func_enter_;
++
++	DBG_871X("%s(): Mode = %d, SmartPS = %d\n", __FUNCTION__,Mode,pwrpriv->smart_ps);
++
++	H2CSetPwrMode.Mode = Mode;
++
++	H2CSetPwrMode.SmartPS = pwrpriv->smart_ps;
++
++	H2CSetPwrMode.BcnPassTime = 1;//pPSC->RegMaxLPSAwakeIntvl;
++
++	rtl8192c_FillH2CCmd(padapter, SET_PWRMODE_EID, sizeof(H2CSetPwrMode), (u8 *)&H2CSetPwrMode);
++	
++_func_exit_;
++}
++
++void ConstructBeacon(_adapter *padapter, u8 *pframe, u32 *pLength)
++{
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	u16					*fctrl;
++	u32					rate_len, pktlen;
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	WLAN_BSSID_EX 		*cur_network = &(pmlmeinfo->network);
++	u8	bc_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
++
++
++	//DBG_871X("%s\n", __FUNCTION__);
++
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;	
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++	
++	_rtw_memcpy(pwlanhdr->addr1, bc_addr, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr3, get_my_bssid(cur_network), ETH_ALEN);
++
++	SetSeqNum(pwlanhdr, 0/*pmlmeext->mgnt_seq*/);
++	//pmlmeext->mgnt_seq++;
++	SetFrameSubType(pframe, WIFI_BEACON);
++	
++	pframe += sizeof(struct rtw_ieee80211_hdr_3addr);	
++	pktlen = sizeof (struct rtw_ieee80211_hdr_3addr);
++	
++	//timestamp will be inserted by hardware
++	pframe += 8;
++	pktlen += 8;
++
++	// beacon interval: 2 bytes
++	_rtw_memcpy(pframe, (unsigned char *)(rtw_get_beacon_interval_from_ie(cur_network->IEs)), 2); 
++
++	pframe += 2;
++	pktlen += 2;
++
++	// capability info: 2 bytes
++	_rtw_memcpy(pframe, (unsigned char *)(rtw_get_capability_from_ie(cur_network->IEs)), 2);
++
++	pframe += 2;
++	pktlen += 2;
++
++	if( (pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE)
++	{
++		//DBG_871X("ie len=%d\n", cur_network->IELength);
++		pktlen += cur_network->IELength - sizeof(NDIS_802_11_FIXED_IEs);
++		_rtw_memcpy(pframe, cur_network->IEs+sizeof(NDIS_802_11_FIXED_IEs), pktlen);
++		
++		goto _ConstructBeacon;
++	}
++
++	//below for ad-hoc mode
++
++	// SSID
++	pframe = rtw_set_ie(pframe, _SSID_IE_, cur_network->Ssid.SsidLength, cur_network->Ssid.Ssid, &pktlen);
++
++	// supported rates...
++	rate_len = rtw_get_rateset_len(cur_network->SupportedRates);
++	pframe = rtw_set_ie(pframe, _SUPPORTEDRATES_IE_, ((rate_len > 8)? 8: rate_len), cur_network->SupportedRates, &pktlen);
++
++	// DS parameter set
++	pframe = rtw_set_ie(pframe, _DSSET_IE_, 1, (unsigned char *)&(cur_network->Configuration.DSConfig), &pktlen);
++
++	if( (pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE)
++	{
++		u32 ATIMWindow;
++		// IBSS Parameter Set...
++		//ATIMWindow = cur->Configuration.ATIMWindow;
++		ATIMWindow = 0;
++		pframe = rtw_set_ie(pframe, _IBSS_PARA_IE_, 2, (unsigned char *)(&ATIMWindow), &pktlen);
++	}	
++
++
++	//todo: ERP IE
++	
++	
++	// EXTERNDED SUPPORTED RATE
++	if (rate_len > 8)
++	{
++		pframe = rtw_set_ie(pframe, _EXT_SUPPORTEDRATES_IE_, (rate_len - 8), (cur_network->SupportedRates + 8), &pktlen);
++	}
++
++
++	//todo:HT for adhoc
++
++_ConstructBeacon:
++
++	if ((pktlen + TXDESC_SIZE) > 512)
++	{
++		DBG_871X("beacon frame too large\n");
++		return;
++	}
++
++	*pLength = pktlen;
++
++	//DBG_871X("%s bcn_sz=%d\n", __FUNCTION__, pktlen);
++
++}
++
++void ConstructPSPoll(_adapter *padapter, u8 *pframe, u32 *pLength)
++{
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	u16					*fctrl;
++	u32					pktlen;
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	//DBG_871X("%s\n", __FUNCTION__);
++
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	// Frame control.
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++	SetPwrMgt(fctrl);
++	SetFrameSubType(pframe, WIFI_PSPOLL);
++
++	// AID.
++	SetDuration(pframe, (pmlmeinfo->aid | 0xc000));
++
++	// BSSID.
++	_rtw_memcpy(pwlanhdr->addr1, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN);
++
++	// TA.
++	_rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN);
++
++	*pLength = 16;
++}
++
++void ConstructNullFunctionData(_adapter *padapter, u8 *pframe, u32 *pLength, u8 *StaAddr, BOOLEAN bForcePowerSave)
++{
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	u16					*fctrl;
++	u32					pktlen;
++	struct mlme_priv		*pmlmepriv = &padapter->mlmepriv;
++	struct wlan_network	*cur_network = &pmlmepriv->cur_network;
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	//DBG_871X("%s:%d\n", __FUNCTION__, bForcePowerSave);
++
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++	if (bForcePowerSave)
++	{
++		SetPwrMgt(fctrl);
++	}
++
++	switch(cur_network->network.InfrastructureMode)
++	{			
++		case Ndis802_11Infrastructure:
++			SetToDs(fctrl);
++			_rtw_memcpy(pwlanhdr->addr1, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN);
++			_rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN);
++			_rtw_memcpy(pwlanhdr->addr3, StaAddr, ETH_ALEN);
++			break;
++		case Ndis802_11APMode:
++			SetFrDs(fctrl);
++			_rtw_memcpy(pwlanhdr->addr1, StaAddr, ETH_ALEN);
++			_rtw_memcpy(pwlanhdr->addr2, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN);
++			_rtw_memcpy(pwlanhdr->addr3, myid(&(padapter->eeprompriv)), ETH_ALEN);
++			break;
++		case Ndis802_11IBSS:
++		default:
++			_rtw_memcpy(pwlanhdr->addr1, StaAddr, ETH_ALEN);
++			_rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN);
++			_rtw_memcpy(pwlanhdr->addr3, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN);
++			break;
++	}
++
++	SetSeqNum(pwlanhdr, 0);
++
++	SetFrameSubType(pframe, WIFI_DATA_NULL);
++
++	pframe += sizeof(struct rtw_ieee80211_hdr_3addr);
++	pktlen = sizeof(struct rtw_ieee80211_hdr_3addr);
++
++	*pLength = pktlen;
++}
++
++void ConstructProbeRsp(_adapter *padapter, u8 *pframe, u32 *pLength, u8 *StaAddr, BOOLEAN bHideSSID)
++{
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	u16					*fctrl;	
++	u8					*mac, *bssid;
++	u32					pktlen;
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	WLAN_BSSID_EX 		*cur_network = &(pmlmeinfo->network);
++	
++	
++	//DBG_871X("%s\n", __FUNCTION__);
++	
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;	
++	
++	mac = myid(&(padapter->eeprompriv));
++	bssid = cur_network->MacAddress;
++	
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++	_rtw_memcpy(pwlanhdr->addr1, StaAddr, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr2, mac, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr3, bssid, ETH_ALEN);
++
++	SetSeqNum(pwlanhdr, 0);
++	SetFrameSubType(fctrl, WIFI_PROBERSP);
++	
++	pktlen = sizeof(struct rtw_ieee80211_hdr_3addr);
++	pframe += pktlen;
++
++	if(cur_network->IELength>MAX_IE_SZ)
++		return;
++
++	_rtw_memcpy(pframe, cur_network->IEs, cur_network->IELength);
++	pframe += cur_network->IELength;
++	pktlen += cur_network->IELength;
++	
++	*pLength = pktlen;
++}
++
++//
++// Description: In normal chip, we should send some packet to Hw which will be used by Fw
++//			in FW LPS mode. The function is to fill the Tx descriptor of this packets, then 
++//			Fw can tell Hw to send these packet derectly.
++// Added by tynli. 2009.10.15.
++//
++static VOID
++FillFakeTxDescriptor92C(
++	IN PADAPTER		Adapter,
++	IN u8*			pDesc,
++	IN u32			BufferLen,
++	IN BOOLEAN		IsPsPoll
++)
++{
++	struct tx_desc	*ptxdesc = (struct tx_desc *)pDesc;
++
++	// Clear all status
++	_rtw_memset(pDesc, 0, 32);
++
++	//offset 0
++	ptxdesc->txdw0 |= cpu_to_le32( OWN | FSG | LSG); //own, bFirstSeg, bLastSeg;
++
++	ptxdesc->txdw0 |= cpu_to_le32(((TXDESC_SIZE+OFFSET_SZ)<<OFFSET_SHT)&0x00ff0000); //32 bytes for TX Desc
++
++	ptxdesc->txdw0 |= cpu_to_le32(BufferLen&0x0000ffff); // Buffer size + command header
++
++	//offset 4
++	ptxdesc->txdw1 |= cpu_to_le32((QSLT_MGNT<<QSEL_SHT)&0x00001f00); // Fixed queue of Mgnt queue
++
++	//Set NAVUSEHDR to prevent Ps-poll AId filed to be changed to error vlaue by Hw.
++	if(IsPsPoll)
++	{
++		ptxdesc->txdw1 |= cpu_to_le32(NAVUSEHDR);
++	}
++	else
++	{
++		ptxdesc->txdw4 |= cpu_to_le32(BIT(7)); // Hw set sequence number
++		ptxdesc->txdw3 |= cpu_to_le32((8 <<28)); //set bit3 to 1. Suugested by TimChen. 2009.12.29.
++	}
++
++	//offset 16
++	ptxdesc->txdw4 |= cpu_to_le32(BIT(8));//driver uses rate
++
++#ifdef CONFIG_USB_HCI
++	// USB interface drop packet if the checksum of descriptor isn't correct.
++	// Using this checksum can let hardware recovery from packet bulk out error (e.g. Cancel URC, Bulk out error.).
++	rtl8192cu_cal_txdesc_chksum(ptxdesc);
++#endif
++	
++	//RT_PRINT_DATA(COMP_CMD, DBG_TRACE, "TxFillCmdDesc8192C(): H2C Tx Cmd Content ----->\n", pDesc, TX_DESC_SIZE);
++}
++
++// To check if reserved page content is destroyed by beacon beacuse beacon is too large.
++// 2010.06.23. Added by tynli.
++VOID
++CheckFwRsvdPageContent(
++	IN	PADAPTER		Adapter
++)
++{
++	HAL_DATA_TYPE*	pHalData = GET_HAL_DATA(Adapter);
++	u32	MaxBcnPageNum;	
++	
++ 	if(pHalData->FwRsvdPageStartOffset != 0)
++ 	{
++ 		/*MaxBcnPageNum = PageNum_128(pMgntInfo->MaxBeaconSize);
++		RT_ASSERT((MaxBcnPageNum <= pHalData->FwRsvdPageStartOffset), 
++			("CheckFwRsvdPageContent(): The reserved page content has been"\
++			"destroyed by beacon!!! MaxBcnPageNum(%d) FwRsvdPageStartOffset(%d)\n!",
++			MaxBcnPageNum, pHalData->FwRsvdPageStartOffset));*/
++ 	}
++}
++
++//
++// Description: Fill the reserved packets that FW will use to RSVD page. 
++//			Now we just send 4 types packet to rsvd page.
++//			(1)Beacon, (2)Ps-poll, (3)Null data, (4)ProbeRsp.
++//	Input: 
++//	    bDLFinished - FALSE: At the first time we will send all the packets as a large packet to Hw,
++//				 		so we need to set the packet length to total lengh.
++//			      TRUE: At the second time, we should send the first packet (default:beacon)
++//						to Hw again and set the lengh in descriptor to the real beacon lengh.
++// 2009.10.15 by tynli.
++static void SetFwRsvdPagePkt(PADAPTER Adapter, BOOLEAN bDLFinished)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);	
++	struct xmit_frame	*pmgntframe;
++	struct pkt_attrib	*pattrib;
++	struct xmit_priv	*pxmitpriv = &(Adapter->xmitpriv);
++	struct mlme_ext_priv	*pmlmeext = &(Adapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	u32	BeaconLength, ProbeRspLength, PSPollLength, NullFunctionDataLength;
++	u8	*ReservedPagePacket;
++	u8	PageNum=0, U1bTmp, TxDescLen=0, TxDescOffset=0;
++	u16	BufIndex=0;
++	u32	TotalPacketLen;
++	RSVDPAGE_LOC	RsvdPageLoc;
++	BOOLEAN	bDLOK = _FALSE;
++
++	DBG_871X("%s\n", __FUNCTION__);
++
++	ReservedPagePacket = (u8*)rtw_malloc(1000);
++	if(ReservedPagePacket == NULL){
++		DBG_871X("%s(): alloc ReservedPagePacket fail !!!\n", __FUNCTION__);
++		return;
++	}
++
++	_rtw_memset(ReservedPagePacket, 0, 1000);
++
++	TxDescLen = 32;//TX_DESC_SIZE;
++
++#ifdef CONFIG_USB_HCI
++	BufIndex = TXDESC_OFFSET;
++	TxDescOffset = TxDescLen+8; //Shift index for 8 bytes because the dummy bytes in the first descipstor.
++#else
++	BufIndex = 0;
++	TxDescOffset = 0;
++#endif
++
++	//(1) beacon
++	ConstructBeacon(Adapter,&ReservedPagePacket[BufIndex],&BeaconLength);
++
++	//DBG_8192C("SetFwRsvdPagePkt(): HW_VAR_SET_TX_CMD: BCN\n", &ReservedPagePacket[BufIndex], (BeaconLength+BufIndex));
++
++//--------------------------------------------------------------------
++
++	// When we count the first page size, we need to reserve description size for the RSVD 
++	// packet, it will be filled in front of the packet in TXPKTBUF.
++	U1bTmp = (u8)PageNum_128(BeaconLength+TxDescLen);
++	PageNum += U1bTmp;
++	// To reserved 2 pages for beacon buffer. 2010.06.24.
++	if(PageNum == 1)
++		PageNum+=1;
++	pHalData->FwRsvdPageStartOffset = PageNum;
++
++	BufIndex = (PageNum*128) + TxDescOffset;
++		
++	//(2) ps-poll
++	ConstructPSPoll(Adapter, &ReservedPagePacket[BufIndex],&PSPollLength);
++	
++	FillFakeTxDescriptor92C(Adapter, &ReservedPagePacket[BufIndex-TxDescLen], PSPollLength, _TRUE);
++
++	//DBG_8192C("SetFwRsvdPagePkt(): HW_VAR_SET_TX_CMD: PS-POLL\n", &ReservedPagePacket[BufIndex-TxDescLen], (PSPollLength+TxDescLen));
++
++	RsvdPageLoc.LocPsPoll = PageNum;
++
++//------------------------------------------------------------------
++			
++	U1bTmp = (u8)PageNum_128(PSPollLength+TxDescLen);
++	PageNum += U1bTmp;
++
++	BufIndex = (PageNum*128) + TxDescOffset;
++
++	//(3) null data
++	ConstructNullFunctionData(
++		Adapter, 
++		&ReservedPagePacket[BufIndex],
++		&NullFunctionDataLength,
++		get_my_bssid(&(pmlmeinfo->network)),
++		_FALSE);
++	
++	FillFakeTxDescriptor92C(Adapter, &ReservedPagePacket[BufIndex-TxDescLen], NullFunctionDataLength, _FALSE);
++
++	RsvdPageLoc.LocNullData = PageNum;
++	
++	//DBG_8192C("SetFwRsvdPagePkt(): HW_VAR_SET_TX_CMD: NULL DATA \n", &ReservedPagePacket[BufIndex-TxDescLen], (NullFunctionDataLength+TxDescLen));
++//------------------------------------------------------------------
++
++	U1bTmp = (u8)PageNum_128(NullFunctionDataLength+TxDescLen);
++	PageNum += U1bTmp;
++
++	BufIndex = (PageNum*128) + TxDescOffset;
++	
++	//(4) probe response
++	ConstructProbeRsp(
++		Adapter, 
++		&ReservedPagePacket[BufIndex],
++		&ProbeRspLength,
++		get_my_bssid(&(pmlmeinfo->network)),
++		_FALSE);
++	
++	FillFakeTxDescriptor92C(Adapter, &ReservedPagePacket[BufIndex-TxDescLen], ProbeRspLength, _FALSE);
++
++	RsvdPageLoc.LocProbeRsp = PageNum;
++
++	//DBG_8192C("SetFwRsvdPagePkt(): HW_VAR_SET_TX_CMD: PROBE RSP \n", &ReservedPagePacket[BufIndex-TxDescLen], (ProbeRspLength-TxDescLen));
++
++//------------------------------------------------------------------
++
++	U1bTmp = (u8)PageNum_128(ProbeRspLength+TxDescLen);
++
++	PageNum += U1bTmp;
++
++	TotalPacketLen = (PageNum*128);
++
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(Adapter, pattrib);
++	pattrib->qsel = 0x10;
++	pattrib->pktlen = pattrib->last_txcmdsz = TotalPacketLen - TxDescLen;
++	_rtw_memcpy(pmgntframe->buf_addr, ReservedPagePacket, TotalPacketLen);
++
++	rtw_hal_mgnt_xmit(Adapter, pmgntframe);
++
++	bDLOK = _TRUE;
++
++	if(bDLOK)
++	{
++		DBG_871X("Set RSVD page location to Fw.\n");
++		rtl8192c_FillH2CCmd(Adapter, RSVD_PAGE_EID, sizeof(RsvdPageLoc), (u8 *)&RsvdPageLoc);
++	}
++
++	rtw_mfree(ReservedPagePacket,1000);
++
++}
++
++void rtl8192c_set_FwJoinBssReport_cmd(_adapter* padapter, u8 mstatus)
++{
++	JOINBSSRPT_PARM	JoinBssRptParm;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	
++_func_enter_;
++
++	DBG_871X("%s mstatus(%x)\n", __FUNCTION__,mstatus);
++
++	if(mstatus == 1)
++	{
++		BOOLEAN bRecover = _FALSE;
++	
++		// We should set AID, correct TSF, HW seq enable before set JoinBssReport to Fw in 88/92C.
++		// Suggested by filen. Added by tynli.
++		rtw_write16(padapter, REG_BCN_PSR_RPT, (0xC000|pmlmeinfo->aid));
++		// Do not set TSF again here or vWiFi beacon DMA INT will not work.
++		//correct_TSF(padapter, pmlmeext);
++		// Hw sequende enable by dedault. 2010.06.23. by tynli.
++		//rtw_write16(padapter, REG_NQOS_SEQ, ((pmlmeext->mgnt_seq+100)&0xFFF));
++		//rtw_write8(padapter, REG_HWSEQ_CTRL, 0xFF);
++
++		//set REG_CR bit 8
++		//U1bTmp = rtw_read8(padapter, REG_CR+1);
++		rtw_write8(padapter,  REG_CR+1, 0x03);
++
++		// Disable Hw protection for a time which revserd for Hw sending beacon.
++		// Fix download reserved page packet fail that access collision with the protection time.
++		// 2010.05.11. Added by tynli.
++		//SetBcnCtrlReg(padapter, 0, BIT3);
++		//SetBcnCtrlReg(padapter, BIT4, 0);
++		rtw_write8(padapter, REG_BCN_CTRL, rtw_read8(padapter, REG_BCN_CTRL)&(~BIT(3)));
++		rtw_write8(padapter, REG_BCN_CTRL, rtw_read8(padapter, REG_BCN_CTRL)|BIT(4));
++
++		// Set FWHW_TXQ_CTRL 0x422[6]=0 to tell Hw the packet is not a real beacon frame.
++		if(pHalData->RegFwHwTxQCtrl&BIT6)
++			bRecover = _TRUE;
++
++		// To tell Hw the packet is not a real beacon frame.
++		//U1bTmp = rtw_read8(padapter, REG_FWHW_TXQ_CTRL+2);
++		rtw_write8(padapter, REG_FWHW_TXQ_CTRL+2, (pHalData->RegFwHwTxQCtrl&(~BIT6)));
++		pHalData->RegFwHwTxQCtrl &= (~BIT6);
++		SetFwRsvdPagePkt(padapter, 0);
++
++		// 2010.05.11. Added by tynli.
++		//SetBcnCtrlReg(padapter, BIT3, 0);
++		//SetBcnCtrlReg(padapter, 0, BIT4);
++		rtw_write8(padapter, REG_BCN_CTRL, rtw_read8(padapter, REG_BCN_CTRL)|BIT(3));
++		rtw_write8(padapter, REG_BCN_CTRL, rtw_read8(padapter, REG_BCN_CTRL)&(~BIT(4)));
++
++		// To make sure that if there exists an adapter which would like to send beacon.
++		// If exists, the origianl value of 0x422[6] will be 1, we should check this to
++		// prevent from setting 0x422[6] to 0 after download reserved page, or it will cause 
++		// the beacon cannot be sent by HW.
++		// 2010.06.23. Added by tynli.
++		if(bRecover)
++		{
++			rtw_write8(padapter, REG_FWHW_TXQ_CTRL+2, (pHalData->RegFwHwTxQCtrl|BIT6));
++			pHalData->RegFwHwTxQCtrl |= BIT6;
++		}
++
++		// Clear CR[8] or beacon packet will not be send to TxBuf anymore.
++		rtw_write8(padapter, REG_CR+1, 0x02);
++	}
++
++	JoinBssRptParm.OpMode = mstatus;
++
++	rtl8192c_FillH2CCmd(padapter, JOINBSS_RPT_EID, sizeof(JoinBssRptParm), (u8 *)&JoinBssRptParm);
++	
++_func_exit_;
++}
++
++#ifdef CONFIG_P2P_PS
++void rtl8192c_set_p2p_ctw_period_cmd(_adapter* padapter, u8 ctwindow)
++{
++	struct P2P_PS_CTWPeriod_t p2p_ps_ctw;
++
++	p2p_ps_ctw.CTWPeriod = ctwindow;
++
++	rtl8192c_FillH2CCmd(padapter, P2P_PS_CTW_CMD_EID, 1, (u8 *)(&p2p_ps_ctw));
++	
++}
++
++void rtl8192c_set_p2p_ps_offload_cmd(_adapter* padapter, u8 p2p_ps_state)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);	
++	struct pwrctrl_priv		*pwrpriv = &padapter->pwrctrlpriv;
++	struct wifidirect_info	*pwdinfo = &( padapter->wdinfo );
++	struct P2P_PS_Offload_t	*p2p_ps_offload = &pHalData->p2p_ps_offload;
++	u8	i;
++	u16	ctwindow;
++	u32	start_time, tsf_low;
++
++_func_enter_;
++
++	switch(p2p_ps_state)
++	{
++		case P2P_PS_DISABLE:
++			DBG_8192C("P2P_PS_DISABLE \n");
++			_rtw_memset(p2p_ps_offload, 0 ,1);
++			break;
++		case P2P_PS_ENABLE:
++			DBG_8192C("P2P_PS_ENABLE \n");
++			// update CTWindow value.
++			if( pwdinfo->ctwindow > 0 )
++			{
++				p2p_ps_offload->CTWindow_En = 1;
++				ctwindow = pwdinfo->ctwindow;
++				if(IS_HARDWARE_TYPE_8723A(padapter))
++				{
++					//rtw_write16(padapter, REG_ATIMWND, ctwindow);
++				}
++				else
++				{
++					rtl8192c_set_p2p_ctw_period_cmd(padapter, ctwindow);
++				}
++			}
++
++			// hw only support 2 set of NoA
++			for( i=0 ; i<pwdinfo->noa_num ; i++)
++			{
++				// To control the register setting for which NOA
++				rtw_write8(padapter, 0x5CF, (i << 4));
++				if(i == 0)
++					p2p_ps_offload->NoA0_En = 1;
++				else
++					p2p_ps_offload->NoA1_En = 1;
++
++				// config P2P NoA Descriptor Register
++				rtw_write32(padapter, 0x5E0, pwdinfo->noa_duration[i]);
++
++				rtw_write32(padapter, 0x5E4, pwdinfo->noa_interval[i]);
++
++				//Get Current TSF value
++				tsf_low = rtw_read32(padapter, REG_TSFTR);
++
++				start_time = pwdinfo->noa_start_time[i];
++				if(pwdinfo->noa_count[i] != 1)
++				{
++					while( start_time <= (tsf_low+(50*1024) ) )
++					{
++						start_time += pwdinfo->noa_interval[i];
++						if(pwdinfo->noa_count[i] != 255)
++							pwdinfo->noa_count[i]--;
++					}
++				}
++				//DBG_8192C("%s(): start_time = %x\n",__FUNCTION__,start_time);
++				rtw_write32(padapter, 0x5E8, start_time);
++
++				rtw_write8(padapter, 0x5EC, pwdinfo->noa_count[i]);
++			}
++
++			if( (pwdinfo->opp_ps == 1) || (pwdinfo->noa_num > 0) )
++			{
++				// rst p2p circuit
++				rtw_write8(padapter, REG_DUAL_TSF_RST, BIT(4));
++
++				p2p_ps_offload->Offload_En = 1;
++
++				if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO))
++				{
++					p2p_ps_offload->role= 1;
++					p2p_ps_offload->AllStaSleep = 0;
++				}
++				else
++				{
++					p2p_ps_offload->role= 0;
++				}
++
++				p2p_ps_offload->discovery = 0;
++			}
++			break;
++		case P2P_PS_SCAN:
++			DBG_8192C("P2P_PS_SCAN \n");
++			p2p_ps_offload->discovery = 1;
++			break;
++		case P2P_PS_SCAN_DONE:
++			DBG_8192C("P2P_PS_SCAN_DONE \n");
++			p2p_ps_offload->discovery = 0;
++			pwdinfo->p2p_ps_state = P2P_PS_ENABLE;
++			break;
++		default:
++			break;
++	}
++
++	rtl8192c_FillH2CCmd(padapter, P2P_PS_OFFLOAD_EID, 1, (u8 *)p2p_ps_offload);
++
++_func_exit_;
++
++}
++#endif // CONFIG_P2P_PS
++
++#ifdef CONFIG_IOL
++#include <rtw_iol.h>
++int rtl8192c_IOL_exec_cmds_sync(ADAPTER *adapter, struct xmit_frame *xmit_frame, u32 max_wating_ms)
++{
++	IO_OFFLOAD_LOC	IoOffloadLoc;
++	u32 start_time = rtw_get_current_time();
++	u32 passing_time_ms;
++	u8 polling_ret;
++	int ret = _FAIL;
++
++	if (rtw_IOL_append_END_cmd(xmit_frame) != _SUCCESS)
++		goto exit;
++
++	dump_mgntframe_and_wait(adapter, xmit_frame, max_wating_ms);
++
++	IoOffloadLoc.LocCmd = 0;
++	if(_SUCCESS != rtl8192c_FillH2CCmd(adapter, H2C_92C_IO_OFFLOAD, sizeof(IO_OFFLOAD_LOC), (u8 *)&IoOffloadLoc))
++		goto exit;
++
++	//polling if the IO offloading is done
++	while( (passing_time_ms=rtw_get_passing_time_ms(start_time)) <= max_wating_ms) {
++		#if 0 //C2H
++		if(0xff == rtw_read8(adapter, REG_C2HEVT_CLEAR))
++			break;
++		#else// 0x1c3
++		if(0x00 != (polling_ret=rtw_read8(adapter, 0x1c3)))
++			break;
++		#endif
++		rtw_msleep_os(5);
++	}
++	#if 0 //debug
++	DBG_871X("IOL %s, polling_ret:0x%02x, 0x1c0=0x%08x, 0x1c4=0x%08x, 0x1cc=0x%08x, 0x1e8=0x%08x, 0x130=0x%08x, 0x134=0x%08x\n"
++			, polling_ret==0xff?"success":"error"
++			, polling_ret
++			, rtw_read32(adapter, 0x1c0)
++			, rtw_read32(adapter, 0x1c4)
++			, rtw_read32(adapter, 0x1cc)
++			, rtw_read32(adapter, 0x1e8)
++			, rtw_read32(adapter, 0x130)
++			, rtw_read32(adapter, 0x134)
++	);
++	rtw_write32(adapter, 0x1c0, 0x0);
++	#endif
++
++	if(polling_ret == 0xff)
++		ret =_SUCCESS;
++	else {
++		DBG_871X("IOL %s, polling_ret:0x%02x\n"
++			//", 0x1c0=0x%08x, 0x1c4=0x%08x, 0x1cc=0x%08x, 0x1e8=0x%08x, 0x130=0x%08x, 0x134=0x%08x\n"
++			, polling_ret==0xff?"success":"error"
++			, polling_ret
++			//, rtw_read32(adapter, 0x1c0)
++			//, rtw_read32(adapter, 0x1c4)
++			//, rtw_read32(adapter, 0x1cc)
++			//, rtw_read32(adapter, 0x1e8)
++			//, rtw_read32(adapter, 0x130)
++			//, rtw_read32(adapter, 0x134)
++		);
++		#if 0 //debug
++		rtw_write16(adapter, 0x1c4, 0x0000); 
++		rtw_msleep_os(10);
++		DBG_871X("after reset, 0x1c4=0x%08x\n", rtw_read32(adapter, 0x1c4));
++		#endif
++
++	}
++
++	{
++		#if 0 //C2H
++		u32 c2h_evt;
++		int i;
++		c2h_evt = rtw_read32(adapter, REG_C2HEVT_MSG_NORMAL);
++		DBG_871X("%s io-offloading complete, in %ums: 0x%08x\n", __FUNCTION__, passing_time_ms, c2h_evt);
++		rtw_write8(adapter, REG_C2HEVT_CLEAR, 0x0);
++		#else// 0x1c3
++		DBG_871X("IOL %s complete in %ums\n", __FUNCTION__, passing_time_ms);
++		rtw_write8(adapter, 0x1c3, 0x0);
++		#endif
++	}
++
++exit:
++	return ret;
++
++}
++#endif //CONFIG_IOL
++
++
++#ifdef CONFIG_BEACON_DISABLE_OFFLOAD
++/* 
++ rtl8192c_dis_beacon_fun_cmd()
++	This function shall only be called by PORT1.
++	PORT0's beacon function can't be disabled, because it's used by RA function in FW/HW.
++	
++	// Still has the REG_BCN_CTRL_1 modified by unknowned party issue in case of Primary Interface + PORT1 combination.
++*/
++u8 rtl8192c_dis_beacon_fun_cmd(_adapter* padapter)
++{	
++	u8	buf[2];
++	u8	res=_SUCCESS;
++	
++_func_enter_;	
++	
++	_rtw_memset(buf, 0, sizeof(buf));
++
++	if (padapter->iface_type == IFACE_PORT0) {
++		//buf[0] = 0x1;
++		DBG_871X("%s(): ERROR! padapter->iface_type = %d\n", __FUNCTION__, padapter->iface_type);
++		return _FAIL;		
++	} else
++		buf[1] = 0x1;
++
++	rtl8192c_FillH2CCmd(padapter, H2C_92C_DISABLE_BCN_FUNC, 2, buf);
++	
++_func_exit_;
++
++	return res;
++
++}
++#endif  // CONFIG_BEACON_DISABLE_OFFLOAD
++
++
++#ifdef CONFIG_TSF_RESET_OFFLOAD
++/*
++	ask FW to Reset sync register at Beacon early interrupt
++*/
++u8 rtl8192c_reset_tsf(_adapter *padapter, u8 reset_port )
++{	
++	u8	buf[2];
++	u8	res=_SUCCESS;
++	
++_func_enter_;
++	if (IFACE_PORT0==reset_port) {
++		buf[0] = 0x1; buf[1] = 0;
++	
++	} else{
++		buf[0] = 0x0; buf[1] = 0x1;
++	}
++	rtl8192c_FillH2CCmd(padapter, H2C_92C_RESET_TSF, 2, buf);
++_func_exit_;
++
++	return res;
++}
++
++int reset_tsf(PADAPTER Adapter, u8 reset_port )
++{
++	u8 reset_cnt_before = 0, reset_cnt_after = 0, loop_cnt = 0;
++	u32 reg_reset_tsf_cnt = (IFACE_PORT0==reset_port) ?
++				REG_FW_RESET_TSF_CNT_0:REG_FW_RESET_TSF_CNT_1;
++
++	rtw_scan_abort(Adapter->pbuddy_adapter);	/*	site survey will cause reset_tsf fail	*/
++	reset_cnt_after = reset_cnt_before = rtw_read8(Adapter,reg_reset_tsf_cnt);
++	rtl8192c_reset_tsf(Adapter, reset_port);
++
++	while ((reset_cnt_after == reset_cnt_before ) && (loop_cnt < 10)) {
++		rtw_msleep_os(100);
++		loop_cnt++;
++		reset_cnt_after = rtw_read8(Adapter, reg_reset_tsf_cnt);
++	}
++
++	return(loop_cnt >= 10) ? _FAIL : _TRUE;
++}
++
++
++#endif	// CONFIG_TSF_RESET_OFFLOAD
++
++#ifdef CONFIG_WOWLAN
++
++void rtl8192c_set_wowlan_cmd(_adapter* padapter)
++{
++	u8	res=_SUCCESS;
++	SETWOWLAN_PARM pwowlan_parm;
++	struct pwrctrl_priv *pwrpriv=&padapter->pwrctrlpriv;
++	
++_func_enter_;
++
++	pwowlan_parm.mode =0;
++	pwowlan_parm.gpio_index=0;
++	pwowlan_parm.gpio_duration=0;
++	pwowlan_parm.second_mode =0;
++	pwowlan_parm.reserve=0;
++	
++	if(pwrpriv->wowlan_mode ==_TRUE){
++		pwowlan_parm.mode |=FW_WOWLAN_FUN_EN;
++		//printk("\n %s 1.pwowlan_parm.mode=0x%x \n",__FUNCTION__,pwowlan_parm.mode );
++		if(pwrpriv->wowlan_pattern ==_TRUE){
++			pwowlan_parm.mode |= FW_WOWLAN_PATTERN_MATCH;
++		//printk("\n %s 2.pwowlan_parm.mode=0x%x \n",__FUNCTION__,pwowlan_parm.mode );
++		}
++		if(pwrpriv->wowlan_magic ==_TRUE){
++			pwowlan_parm.mode |=FW_WOWLAN_MAGIC_PKT;
++		//printk("\n %s 3.pwowlan_parm.mode=0x%x \n",__FUNCTION__,pwowlan_parm.mode );
++		}
++		if(pwrpriv->wowlan_unicast ==_TRUE){
++			pwowlan_parm.mode |=FW_WOWLAN_UNICAST;
++		//printk("\n %s 4.pwowlan_parm.mode=0x%x \n",__FUNCTION__,pwowlan_parm.mode );
++		}
++		//WOWLAN_GPIO_ACTIVE means GPIO high active
++		//pwowlan_parm.mode |=FW_WOWLAN_GPIO_ACTIVE;
++		pwowlan_parm.mode |=FW_WOWLAN_REKEY_WAKEUP;
++		pwowlan_parm.mode |=FW_WOWLAN_DEAUTH_WAKEUP;
++		
++		rtl8192c_set_FwJoinBssReport_cmd( padapter, 1);
++		
++		//GPIO3
++		pwowlan_parm.gpio_index=3;
++		
++		//duration unit is 64us
++		pwowlan_parm.gpio_duration=0xff;
++		//
++		pwowlan_parm.second_mode|=FW_WOWLAN_GPIO_WAKEUP_EN;
++		//printk("\n %s 5.pwowlan_parm.mode=0x%x \n",__FUNCTION__,pwowlan_parm.mode );
++		{	u8 *ptr=(u8 *)&pwowlan_parm;
++			printk("\n %s H2C_WO_WLAN=%x %02x:%02x:%02x:%02x:%02x \n",__FUNCTION__,H2C_WO_WLAN_CMD,ptr[0],ptr[1],ptr[2],ptr[3],ptr[4] );
++		}
++		rtl8192c_FillH2CCmd(padapter, H2C_WO_WLAN_CMD, 4, (u8 *)&pwowlan_parm);
++
++		//keep alive period = 3 * 10 BCN interval
++		pwowlan_parm.mode =3;
++		pwowlan_parm.gpio_index=3;
++		rtl8192c_FillH2CCmd(padapter, KEEP_ALIVE_CONTROL_CMD, 2, (u8 *)&pwowlan_parm);
++		printk("%s after KEEP_ALIVE_CONTROL_CMD register 0x81=%x \n",__FUNCTION__,rtw_read8(padapter, 0x81));
++
++		pwowlan_parm.mode =1;
++		pwowlan_parm.gpio_index=0;
++		pwowlan_parm.gpio_duration=0;
++		rtl8192c_FillH2CCmd(padapter, DISCONNECT_DECISION_CTRL_CMD, 3, (u8 *)&pwowlan_parm);
++		printk("%s after DISCONNECT_DECISION_CTRL_CMD register 0x81=%x \n",__FUNCTION__,rtw_read8(padapter, 0x81));
++		
++		//enable GPIO wakeup
++		pwowlan_parm.mode =1;
++		pwowlan_parm.gpio_index=0;
++		pwowlan_parm.gpio_duration=0;
++		rtl8192c_FillH2CCmd(padapter, REMOTE_WAKE_CTRL_CMD, 3, (u8 *)&pwowlan_parm);
++	}
++	else
++		rtl8192c_FillH2CCmd(padapter, H2C_WO_WLAN_CMD, 3, (u8 *)&pwowlan_parm);
++
++	
++_func_exit_;
++
++	return ;
++
++}
++
++#endif  //CONFIG_WOWLAN
++
++
++
++
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_dm.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_dm.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_dm.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_dm.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,5056 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++//============================================================
++// Description:
++//
++// This file is for 92CE/92CU dynamic mechanism only
++//
++//
++//============================================================
++
++//============================================================
++// include files
++//============================================================
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <rtw_byteorder.h>
++
++#include <rtl8192c_hal.h>
++#include "../dm.h"
++#ifdef CONFIG_INTEL_PROXIM
++#include "../proxim/intel_proxim.h"	
++#endif
++//============================================================
++// Global var
++//============================================================
++static u32 EDCAParam[maxAP][3] =
++{          // UL			DL
++	{0x5ea322, 0x00a630, 0x00a44f}, //atheros AP
++	{0x5ea32b, 0x5ea42b, 0x5e4322}, //broadcom AP
++	{0x3ea430, 0x00a630, 0x3ea44f}, //cisco AP
++	{0x5ea44f, 0x00a44f, 0x5ea42b}, //marvell AP
++	{0x5ea422, 0x00a44f, 0x00a44f}, //ralink AP
++	//{0x5ea44f, 0x5ea44f, 0x5ea44f}, //realtek AP
++	{0xa44f, 0x5ea44f, 0x5e431c}, //realtek AP
++	{0x5ea42b, 0xa630, 0x5e431c}, //airgocap AP
++	{0x5ea42b, 0x5ea42b, 0x5ea42b}, //unknown AP
++//	{0x5e4322, 0x00a44f, 0x5ea44f}, //unknown AP
++};
++
++
++/*-----------------------------------------------------------------------------
++ * Function:	dm_DIGInit()
++ *
++ * Overview:	Set DIG scheme init value.
++ *
++ * Input:		NONE
++ *
++ * Output:		NONE
++ *
++ * Return:		NONE
++ *
++ * Revised History:
++ *	When		Who		Remark
++ *
++ *---------------------------------------------------------------------------*/
++static void	dm_DIGInit(
++	IN	PADAPTER	pAdapter
++)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	DIG_T	*pDigTable = &pdmpriv->DM_DigTable;
++	
++
++	pDigTable->Dig_Enable_Flag = _TRUE;
++	pDigTable->Dig_Ext_Port_Stage = DIG_EXT_PORT_STAGE_MAX;
++	
++	pDigTable->CurIGValue = 0x20;
++	pDigTable->PreIGValue = 0x0;
++
++	pDigTable->CurSTAConnectState = pDigTable->PreSTAConnectState = DIG_STA_DISCONNECT;
++	pDigTable->CurMultiSTAConnectState = DIG_MultiSTA_DISCONNECT;
++
++	pDigTable->RssiLowThresh 	= DM_DIG_THRESH_LOW;
++	pDigTable->RssiHighThresh 	= DM_DIG_THRESH_HIGH;
++
++	pDigTable->FALowThresh	= DM_FALSEALARM_THRESH_LOW;
++	pDigTable->FAHighThresh	= DM_FALSEALARM_THRESH_HIGH;
++
++	
++	pDigTable->rx_gain_range_max = DM_DIG_MAX;
++	pDigTable->rx_gain_range_min = DM_DIG_MIN;
++	pDigTable->rx_gain_range_min_nolink = 0;
++
++	pDigTable->BackoffVal = DM_DIG_BACKOFF_DEFAULT;
++	pDigTable->BackoffVal_range_max = DM_DIG_BACKOFF_MAX;
++	pDigTable->BackoffVal_range_min = DM_DIG_BACKOFF_MIN;
++
++	pDigTable->PreCCKPDState = CCK_PD_STAGE_MAX;
++	pDigTable->CurCCKPDState = CCK_PD_STAGE_LowRssi;
++
++	pDigTable->ForbiddenIGI = DM_DIG_MIN;
++	pDigTable->LargeFAHit = 0;
++	pDigTable->Recover_cnt = 0;
++	pdmpriv->DIG_Dynamic_MIN  = 0x25; //for FUNAI_TV
++}
++
++
++static u8 dm_initial_gain_MinPWDB(
++	IN	PADAPTER	pAdapter
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	DIG_T			*pDigTable = &pdmpriv->DM_DigTable;
++	int	Rssi_val_min = 0;
++	
++	if((pDigTable->CurMultiSTAConnectState == DIG_MultiSTA_CONNECT) &&
++		(pDigTable->CurSTAConnectState == DIG_STA_CONNECT) )
++	{
++		if(pdmpriv->EntryMinUndecoratedSmoothedPWDB != 0)
++#ifdef CONFIG_CONCURRENT_MODE
++			Rssi_val_min  =  (pdmpriv->UndecoratedSmoothedPWDB+pdmpriv->EntryMinUndecoratedSmoothedPWDB)/2;
++#else
++			Rssi_val_min  =  (pdmpriv->EntryMinUndecoratedSmoothedPWDB > pdmpriv->UndecoratedSmoothedPWDB)?
++					pdmpriv->UndecoratedSmoothedPWDB:pdmpriv->EntryMinUndecoratedSmoothedPWDB;		
++#endif //CONFIG_CONCURRENT_MODE
++		else
++			Rssi_val_min = pdmpriv->UndecoratedSmoothedPWDB;
++	}
++	else if(pDigTable->CurSTAConnectState == DIG_STA_CONNECT || 
++			pDigTable->CurSTAConnectState == DIG_STA_BEFORE_CONNECT) 
++		Rssi_val_min = pdmpriv->UndecoratedSmoothedPWDB;
++	else if(pDigTable->CurMultiSTAConnectState == DIG_MultiSTA_CONNECT)
++		Rssi_val_min = pdmpriv->EntryMinUndecoratedSmoothedPWDB;
++
++	//printk("%s CurMultiSTAConnectState(0x%02x) UndecoratedSmoothedPWDB(%d),EntryMinUndecoratedSmoothedPWDB(%d)\n"
++	//,__FUNCTION__,pDigTable->CurSTAConnectState,
++	//pdmpriv->UndecoratedSmoothedPWDB,pdmpriv->EntryMinUndecoratedSmoothedPWDB);
++
++	return (u8)Rssi_val_min;
++}
++
++
++static VOID 
++dm_FalseAlarmCounterStatistics(
++	IN	PADAPTER	Adapter
++	)
++{
++	u32 ret_value;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	PFALSE_ALARM_STATISTICS FalseAlmCnt = &(pdmpriv->FalseAlmCnt);
++#ifdef CONFIG_CONCURRENT_MODE
++	PADAPTER pbuddy_adapter = Adapter->pbuddy_adapter;
++#endif //CONFIG_CONCURRENT_MODE
++	
++	ret_value = PHY_QueryBBReg(Adapter, rOFDM_PHYCounter1, bMaskDWord);
++       FalseAlmCnt->Cnt_Parity_Fail = ((ret_value&0xffff0000)>>16);	
++
++       ret_value = PHY_QueryBBReg(Adapter, rOFDM_PHYCounter2, bMaskDWord);
++	FalseAlmCnt->Cnt_Rate_Illegal = (ret_value&0xffff);
++	FalseAlmCnt->Cnt_Crc8_fail = ((ret_value&0xffff0000)>>16);
++	ret_value = PHY_QueryBBReg(Adapter, rOFDM_PHYCounter3, bMaskDWord);
++	FalseAlmCnt->Cnt_Mcs_fail = (ret_value&0xffff);
++	ret_value = PHY_QueryBBReg(Adapter, rOFDM0_FrameSync, bMaskDWord);
++	FalseAlmCnt->Cnt_Fast_Fsync = (ret_value&0xffff);
++	FalseAlmCnt->Cnt_SB_Search_fail = ((ret_value&0xffff0000)>>16);
++
++	FalseAlmCnt->Cnt_Ofdm_fail = 	FalseAlmCnt->Cnt_Parity_Fail + FalseAlmCnt->Cnt_Rate_Illegal +
++								FalseAlmCnt->Cnt_Crc8_fail + FalseAlmCnt->Cnt_Mcs_fail+
++								FalseAlmCnt->Cnt_Fast_Fsync + FalseAlmCnt->Cnt_SB_Search_fail;
++
++	
++	//hold cck counter
++	PHY_SetBBReg(Adapter, rCCK0_FalseAlarmReport, BIT(14), 1);
++	
++	ret_value = PHY_QueryBBReg(Adapter, rCCK0_FACounterLower, bMaskByte0);
++	FalseAlmCnt->Cnt_Cck_fail = ret_value;
++
++	ret_value = PHY_QueryBBReg(Adapter, rCCK0_FACounterUpper, bMaskByte3);
++	FalseAlmCnt->Cnt_Cck_fail +=  (ret_value& 0xff)<<8;
++	
++	FalseAlmCnt->Cnt_all = (	FalseAlmCnt->Cnt_Parity_Fail +
++						FalseAlmCnt->Cnt_Rate_Illegal +
++						FalseAlmCnt->Cnt_Crc8_fail +
++						FalseAlmCnt->Cnt_Mcs_fail +
++						FalseAlmCnt->Cnt_Cck_fail);	
++
++	Adapter->recvpriv.FalseAlmCnt_all = FalseAlmCnt->Cnt_all;
++#ifdef CONFIG_CONCURRENT_MODE
++	if(pbuddy_adapter)
++		pbuddy_adapter->recvpriv.FalseAlmCnt_all = FalseAlmCnt->Cnt_all;
++#endif //CONFIG_CONCURRENT_MODE
++
++	//reset false alarm counter registers
++	PHY_SetBBReg(Adapter, rOFDM1_LSTF, 0x08000000, 1);
++	PHY_SetBBReg(Adapter, rOFDM1_LSTF, 0x08000000, 0);
++	//reset cck counter
++	PHY_SetBBReg(Adapter, rCCK0_FalseAlarmReport, 0x0000c000, 0);
++	//enable cck counter
++	PHY_SetBBReg(Adapter, rCCK0_FalseAlarmReport, 0x0000c000, 2);
++
++	//RT_TRACE(	COMP_DIG, DBG_LOUD, ("Cnt_Parity_Fail = %ld, Cnt_Rate_Illegal = %ld, Cnt_Crc8_fail = %ld, Cnt_Mcs_fail = %ld\n", 
++	//			FalseAlmCnt->Cnt_Parity_Fail, FalseAlmCnt->Cnt_Rate_Illegal, FalseAlmCnt->Cnt_Crc8_fail, FalseAlmCnt->Cnt_Mcs_fail) );
++	//RT_TRACE(	COMP_DIG, DBG_LOUD, ("Cnt_Ofdm_fail = %ld, Cnt_Cck_fail = %ld, Cnt_all = %ld\n", 
++	//			FalseAlmCnt->Cnt_Ofdm_fail, FalseAlmCnt->Cnt_Cck_fail, FalseAlmCnt->Cnt_all) );
++	//RT_TRACE(	COMP_DIG, DBG_LOUD, ("Cnt_Ofdm_fail = %ld, Cnt_Cck_fail = %ld, Cnt_all = %ld\n", 
++	//			FalseAlmCnt->Cnt_Ofdm_fail, FalseAlmCnt->Cnt_Cck_fail, FalseAlmCnt->Cnt_all) );
++}
++
++
++static VOID
++DM_Write_DIG(
++	IN	PADAPTER	pAdapter
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	DIG_T	*pDigTable = &pdmpriv->DM_DigTable;
++	
++#ifdef CONFIG_CONCURRENT_MODE
++	if(rtw_buddy_adapter_up(pAdapter))
++	{
++		PADAPTER pbuddy_adapter = pAdapter->pbuddy_adapter;
++		PHAL_DATA_TYPE	pbuddy_HalData = GET_HAL_DATA(pbuddy_adapter);
++		struct dm_priv *pbuddy_dmpriv = &pbuddy_HalData->dmpriv;
++		DIG_T	*pbuddy_DigTable = &pbuddy_dmpriv->DM_DigTable;
++
++		//sync IGValue
++		pbuddy_DigTable->PreIGValue = pDigTable->PreIGValue;
++		pbuddy_DigTable->CurIGValue = pDigTable->CurIGValue;
++	}
++#endif //CONFIG_CONCURRENT_MODE	
++
++
++	//RT_TRACE(	COMP_DIG, DBG_LOUD, ("CurIGValue = 0x%lx, PreIGValue = 0x%lx, BackoffVal = %d\n", 
++	//			DM_DigTable.CurIGValue, DM_DigTable.PreIGValue, DM_DigTable.BackoffVal));
++
++	if (pDigTable->Dig_Enable_Flag == _FALSE)
++	{
++		//RT_TRACE(	COMP_DIG, DBG_LOUD, ("DIG is disabled\n"));
++		pDigTable->PreIGValue = 0x17;
++		return;
++	}
++
++	if( (pDigTable->PreIGValue != pDigTable->CurIGValue) || ( pAdapter->bForceWriteInitGain ) )
++	{
++		// Set initial gain.
++		//PHY_SetBBReg(pAdapter, rOFDM0_XAAGCCore1, bMaskByte0, pDigTable->CurIGValue);
++		//PHY_SetBBReg(pAdapter, rOFDM0_XBAGCCore1, bMaskByte0, pDigTable->CurIGValue);
++		//printk("%s DIG(0x%02x)\n",__FUNCTION__,pDigTable->CurIGValue);
++
++#if defined CONFIG_WIDI_DIG_3E && defined CONFIG_INTEL_WIDI
++		if( pAdapter->mlmepriv.widi_enable == _TRUE )
++		{
++			PHY_SetBBReg(pAdapter, rOFDM0_XAAGCCore1, 0x7f, 0x3e);
++			PHY_SetBBReg(pAdapter, rOFDM0_XBAGCCore1, 0x7f, 0x3e);
++		}
++		else
++#endif //defined CONFIG_WIDI_DIG_3E && defined CONFIG_INTEL_WIDI
++		{
++			PHY_SetBBReg(pAdapter, rOFDM0_XAAGCCore1, 0x7f, pDigTable->CurIGValue);
++			PHY_SetBBReg(pAdapter, rOFDM0_XBAGCCore1, 0x7f, pDigTable->CurIGValue);
++		}
++		pDigTable->PreIGValue = pDigTable->CurIGValue;
++	}
++}
++
++
++static VOID 
++dm_CtrlInitGainByFA(
++	IN	PADAPTER	pAdapter
++)	
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	DIG_T	*pDigTable = &pdmpriv->DM_DigTable;
++	PFALSE_ALARM_STATISTICS FalseAlmCnt = &(pdmpriv->FalseAlmCnt);
++
++	u8	value_IGI = pDigTable->CurIGValue;
++	
++	if(FalseAlmCnt->Cnt_all < DM_DIG_FA_TH0)	
++		value_IGI --;
++	else if(FalseAlmCnt->Cnt_all < DM_DIG_FA_TH1)	
++		value_IGI += 0;
++	else if(FalseAlmCnt->Cnt_all < DM_DIG_FA_TH2)	
++		value_IGI ++;
++	else if(FalseAlmCnt->Cnt_all >= DM_DIG_FA_TH2)	
++		value_IGI +=2;
++	
++	if(value_IGI > DM_DIG_FA_UPPER)			
++		value_IGI = DM_DIG_FA_UPPER;
++	if(value_IGI < DM_DIG_FA_LOWER)
++		value_IGI = DM_DIG_FA_LOWER;
++
++	if(FalseAlmCnt->Cnt_all > 10000)
++		value_IGI = DM_DIG_FA_UPPER;
++	
++	pDigTable->CurIGValue = value_IGI;
++	
++	DM_Write_DIG(pAdapter);
++	
++}
++
++#ifdef CONFIG_SPECIAL_SETTING_FOR_FUNAI_TV
++VOID dm_CtrlInitGainByRssi( IN PADAPTER pAdapter) 
++{ 
++
++	u32 isBT;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	DIG_T	*pDigTable = &pdmpriv->DM_DigTable;
++	PFALSE_ALARM_STATISTICS FalseAlmCnt = &(pdmpriv->FalseAlmCnt);
++#ifdef CONFIG_DM_ADAPTIVITY
++	u8 Adap_IGI_Upper = pdmpriv->IGI_target + 30 + (u8) pdmpriv->TH_L2H_ini -(u8) pdmpriv->TH_EDCCA_HL_diff;
++#endif
++
++	 //modify DIG upper bound
++	if((pDigTable->Rssi_val_min + 20) > DM_DIG_MAX )
++		pDigTable->rx_gain_range_max = DM_DIG_MAX;
++ 	else
++  		pDigTable->rx_gain_range_max = pDigTable->Rssi_val_min + 20;
++
++	//modify DIG lower bound	
++	if((FalseAlmCnt->Cnt_all > 500)&&(pdmpriv->DIG_Dynamic_MIN < 0x25))
++  		pdmpriv->DIG_Dynamic_MIN++;
++ 	if((FalseAlmCnt->Cnt_all < 500)&&(pdmpriv->DIG_Dynamic_MIN > DM_DIG_MIN))
++  		pdmpriv->DIG_Dynamic_MIN--;
++	if((pDigTable->Rssi_val_min < 8) && (pdmpriv->DIG_Dynamic_MIN > DM_DIG_MIN))
++		pdmpriv->DIG_Dynamic_MIN--;
++	
++ 	//modify DIG lower bound, deal with abnorally large false alarm
++ 	if(FalseAlmCnt->Cnt_all > 10000)
++ 	{
++ 		//RT_TRACE(COMP_DIG, DBG_LOUD, ("dm_DIG(): Abnornally false alarm case. \n"));
++  		pDigTable->LargeFAHit++;
++ 		 if(pDigTable->ForbiddenIGI < pDigTable->CurIGValue)
++  		{
++   			pDigTable->ForbiddenIGI = pDigTable->CurIGValue;
++	  		pDigTable->LargeFAHit = 1;
++	  	}
++	  	if(pDigTable->LargeFAHit >= 3)
++	  	{
++			if((pDigTable->ForbiddenIGI+1) >pDigTable->rx_gain_range_max)
++		    		pDigTable->rx_gain_range_min = pDigTable->rx_gain_range_max;
++		   	else
++		    		pDigTable->rx_gain_range_min = (pDigTable->ForbiddenIGI + 1);
++		   	pDigTable->Recover_cnt = 3600; //3600=2hr
++		  }
++	 }
++	 else
++	 {
++	  //Recovery mechanism for IGI lower bound
++	  	if(pDigTable->Recover_cnt != 0){
++	   		pDigTable->Recover_cnt --;
++	  	}
++	  	else
++	 	{
++			if(pDigTable->LargeFAHit == 0 )
++	   		{
++	   			if((pDigTable->ForbiddenIGI -1) < pdmpriv->DIG_Dynamic_MIN) //DM_DIG_MIN)
++			    	{
++			     		pDigTable->ForbiddenIGI = pdmpriv->DIG_Dynamic_MIN; //DM_DIG_MIN;
++			     		pDigTable->rx_gain_range_min = pdmpriv->DIG_Dynamic_MIN; //DM_DIG_MIN;
++			    	}
++			    	else
++			    	{
++			     		pDigTable->ForbiddenIGI --;
++			     		pDigTable->rx_gain_range_min = (pDigTable->ForbiddenIGI + 1);
++			    	}
++	   		}
++	   		else if(pDigTable->LargeFAHit == 3 )
++	   		{
++	    			pDigTable->LargeFAHit = 0;
++	   		}
++	  	}
++	 }
++ #ifdef CONFIG_USB_HCI
++	if(FalseAlmCnt->Cnt_all < 250)
++	{
++#endif
++		//DBG_8192C("===> dm_CtrlInitGainByRssi, Enter DIG by SS mode\n");
++		
++		isBT = rtw_read8(pAdapter, 0x4fd) & 0x01;
++
++		if(!isBT){
++
++			if(FalseAlmCnt->Cnt_all > pDigTable->FAHighThresh)
++			{
++				if((pDigTable->BackoffVal -2) < pDigTable->BackoffVal_range_min)
++					pDigTable->BackoffVal = pDigTable->BackoffVal_range_min;
++				else
++					pDigTable->BackoffVal -= 2; 
++			}	
++			else if(FalseAlmCnt->Cnt_all < pDigTable->FALowThresh)
++			{
++				if((pDigTable->BackoffVal+2) > pDigTable->BackoffVal_range_max)
++					pDigTable->BackoffVal = pDigTable->BackoffVal_range_max;
++				else
++					pDigTable->BackoffVal +=2;
++			}	
++		}
++		else
++			pDigTable->BackoffVal = DM_DIG_BACKOFF_DEFAULT;
++
++		pDigTable->CurIGValue = pDigTable->Rssi_val_min+10-pDigTable->BackoffVal;	
++
++		//DBG_8192C("Rssi_val_min = %x BackoffVal %x\n",pDigTable->Rssi_val_min, pDigTable->BackoffVal);
++#ifdef CONFIG_USB_HCI
++	}
++	else
++	{		
++		//DBG_8192C("===> dm_CtrlInitGainByRssi, Enter DIG by FA mode\n");
++		//DBG_8192C("RSSI = 0x%x", pDigTable->Rssi_val_min);
++
++		//Adjust initial gain by false alarm		
++		if(FalseAlmCnt->Cnt_all > 1000)
++			pDigTable->CurIGValue = pDigTable ->PreIGValue+2;
++		else if (FalseAlmCnt->Cnt_all > 750)
++			pDigTable->CurIGValue = pDigTable->PreIGValue+1;
++		else if(FalseAlmCnt->Cnt_all < 500)
++			pDigTable->CurIGValue = pDigTable->PreIGValue-1;	
++	}
++#endif
++
++	//Check initial gain by upper/lower bound
++	if(pDigTable->CurIGValue >pDigTable->rx_gain_range_max)
++		pDigTable->CurIGValue = pDigTable->rx_gain_range_max;
++
++	if(pDigTable->CurIGValue < pDigTable->rx_gain_range_min)
++		pDigTable->CurIGValue = pDigTable->rx_gain_range_min;
++
++#ifdef CONFIG_DM_ADAPTIVITY
++	if(pdmpriv->DMFlag & DYNAMIC_FUNC_ADAPTIVITY)
++	{
++		if(pDigTable->CurIGValue > Adap_IGI_Upper)
++			pDigTable->CurIGValue = Adap_IGI_Upper;
++
++		if(pdmpriv->IGI_LowerBound != 0)
++		{
++			if(pDigTable->CurIGValue < pdmpriv->IGI_LowerBound)
++				pDigTable->CurIGValue = pdmpriv->IGI_LowerBound;
++		}
++		LOG_LEVEL(_drv_info_, FUNC_ADPT_FMT": pdmpriv->IGI_LowerBound = %d\n",
++			FUNC_ADPT_ARG(pAdapter), pdmpriv->IGI_LowerBound);
++	}
++#endif /* CONFIG_DM_ADAPTIVITY */
++
++	//printk("%s => rx_gain_range_max(0x%02x) rx_gain_range_min(0x%02x)\n",__FUNCTION__,
++	//	pDigTable->rx_gain_range_max,pDigTable->rx_gain_range_min);
++	//printk("%s CurIGValue(0x%02x)  <====\n",__FUNCTION__,pDigTable->CurIGValue );		
++
++	DM_Write_DIG(pAdapter);
++
++}
++#else
++static VOID dm_CtrlInitGainByRssi(IN	PADAPTER	pAdapter)	
++{
++	u32 isBT;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	DIG_T	*pDigTable = &pdmpriv->DM_DigTable;
++	PFALSE_ALARM_STATISTICS FalseAlmCnt = &(pdmpriv->FalseAlmCnt);
++	u8 RSSI_tmp = dm_initial_gain_MinPWDB(pAdapter);
++#ifdef CONFIG_DM_ADAPTIVITY
++	u8 Adap_IGI_Upper = pdmpriv->IGI_target + 30 + (u8) pdmpriv->TH_L2H_ini -(u8) pdmpriv->TH_EDCCA_HL_diff;
++#endif
++
++	//modify DIG upper bound
++	if((pDigTable->Rssi_val_min + 20) > DM_DIG_MAX )
++		pDigTable->rx_gain_range_max = DM_DIG_MAX;
++	else
++		pDigTable->rx_gain_range_max = pDigTable->Rssi_val_min + 20;
++	//printk("%s Rssi_val_min(0x%02x),rx_gain_range_max(0x%02x)\n",__FUNCTION__,pDigTable->Rssi_val_min,pDigTable->rx_gain_range_max);
++	//modify DIG lower bound, deal with abnorally large false alarm
++	if(FalseAlmCnt->Cnt_all > 10000)
++	{
++		//RT_TRACE(COMP_DIG, DBG_LOUD, ("dm_DIG(): Abnornally false alarm case. \n"));
++
++		pDigTable->LargeFAHit++;
++		if(pDigTable->ForbiddenIGI < pDigTable->CurIGValue)
++		{
++			pDigTable->ForbiddenIGI = pDigTable->CurIGValue;
++			pDigTable->LargeFAHit = 1;
++		}
++
++		if(pDigTable->LargeFAHit >= 3)
++		{
++			if((pDigTable->ForbiddenIGI+1) > pDigTable->rx_gain_range_max)
++				pDigTable->rx_gain_range_min = pDigTable->rx_gain_range_max;
++			else
++				pDigTable->rx_gain_range_min = (pDigTable->ForbiddenIGI + 1);
++			pDigTable->Recover_cnt = 3600; //3600=2hr
++		}
++	}
++	else
++	{
++		//Recovery mechanism for IGI lower bound
++		if(pDigTable->Recover_cnt != 0)
++			pDigTable->Recover_cnt --;
++		else
++		{
++			if(pDigTable->LargeFAHit == 0 )
++			{
++				if((pDigTable->ForbiddenIGI -1) < DM_DIG_MIN)
++				{
++					pDigTable->ForbiddenIGI = DM_DIG_MIN;
++					pDigTable->rx_gain_range_min = DM_DIG_MIN;
++				}
++				else
++				{
++					pDigTable->ForbiddenIGI --;
++					pDigTable->rx_gain_range_min = (pDigTable->ForbiddenIGI + 1);
++				}
++			}
++			else if(pDigTable->LargeFAHit == 3 )
++			{
++				pDigTable->LargeFAHit = 0;
++			}
++		}
++	}
++
++	//RT_TRACE(COMP_DIG, DBG_LOUD, ("DM_DigTable.ForbiddenIGI = 0x%x, DM_DigTable.LargeFAHit = 0x%x\n",pDigTable->ForbiddenIGI, pDigTable->LargeFAHit));
++	//RT_TRACE(COMP_DIG, DBG_LOUD, ("DM_DigTable.rx_gain_range_max = 0x%x, DM_DigTable.rx_gain_range_min = 0x%x\n",pDigTable->rx_gain_range_max, pDigTable->rx_gain_range_min));
++
++#ifdef CONFIG_USB_HCI
++	if(FalseAlmCnt->Cnt_all < 250)
++	{
++#endif
++		//DBG_8192C("===> dm_CtrlInitGainByRssi, Enter DIG by SS mode\n");
++		
++		isBT = rtw_read8(pAdapter, 0x4fd) & 0x01;
++
++		if(!isBT){
++
++			if(FalseAlmCnt->Cnt_all > pDigTable->FAHighThresh)
++			{
++				if((pDigTable->BackoffVal -2) < pDigTable->BackoffVal_range_min)
++					pDigTable->BackoffVal = pDigTable->BackoffVal_range_min;
++				else
++					pDigTable->BackoffVal -= 2; 
++			}	
++			else if(FalseAlmCnt->Cnt_all < pDigTable->FALowThresh)
++			{
++				if((pDigTable->BackoffVal+2) > pDigTable->BackoffVal_range_max)
++					pDigTable->BackoffVal = pDigTable->BackoffVal_range_max;
++				else
++					pDigTable->BackoffVal +=2;
++			}	
++		}
++		else
++			pDigTable->BackoffVal = DM_DIG_BACKOFF_DEFAULT;
++
++		pDigTable->CurIGValue = pDigTable->Rssi_val_min+10-pDigTable->BackoffVal;	
++
++		//DBG_8192C("Rssi_val_min = %x BackoffVal %x\n",pDigTable->Rssi_val_min, pDigTable->BackoffVal);
++#ifdef CONFIG_USB_HCI
++	}
++	else
++	{		
++		//DBG_8192C("===> dm_CtrlInitGainByRssi, Enter DIG by FA mode\n");
++		//DBG_8192C("RSSI = 0x%x", pDigTable->Rssi_val_min);
++
++		//Adjust initial gain by false alarm		
++		if(FalseAlmCnt->Cnt_all > 1000)
++			pDigTable->CurIGValue = pDigTable ->PreIGValue+2;
++		else if (FalseAlmCnt->Cnt_all > 750)
++			pDigTable->CurIGValue = pDigTable->PreIGValue+1;
++		else if(FalseAlmCnt->Cnt_all < 500)
++			pDigTable->CurIGValue = pDigTable->PreIGValue-1;	
++	}
++#endif
++
++	if(RSSI_tmp <= DM_DIG_MIN)
++		pDigTable->rx_gain_range_min = DM_DIG_MIN;
++	else if(RSSI_tmp >= DM_DIG_MAX)
++		pDigTable->rx_gain_range_min = DM_DIG_MAX;
++	else
++		pDigTable->rx_gain_range_min = RSSI_tmp;
++
++
++	//Check initial gain by upper/lower bound
++	if(pDigTable->CurIGValue >pDigTable->rx_gain_range_max)
++		pDigTable->CurIGValue = pDigTable->rx_gain_range_max;
++
++	if(pDigTable->CurIGValue < pDigTable->rx_gain_range_min)
++		pDigTable->CurIGValue = pDigTable->rx_gain_range_min;
++
++#ifdef CONFIG_DM_ADAPTIVITY
++	if(pdmpriv->DMFlag & DYNAMIC_FUNC_ADAPTIVITY)
++	{
++		if(pDigTable->CurIGValue > Adap_IGI_Upper)
++			pDigTable->CurIGValue = Adap_IGI_Upper;
++
++		if(pdmpriv->IGI_LowerBound != 0)
++		{
++			if(pDigTable->CurIGValue < pdmpriv->IGI_LowerBound)
++				pDigTable->CurIGValue = pdmpriv->IGI_LowerBound;
++		}
++		LOG_LEVEL(_drv_info_, FUNC_ADPT_FMT": pdmpriv->IGI_LowerBound = %d\n",
++			FUNC_ADPT_ARG(pAdapter), pdmpriv->IGI_LowerBound);
++	}
++#endif /* CONFIG_DM_ADAPTIVITY */
++
++	//printk("%s => rx_gain_range_max(0x%02x) rx_gain_range_min(0x%02x)\n",__FUNCTION__,
++	//	pDigTable->rx_gain_range_max,pDigTable->rx_gain_range_min);
++	//printk("%s CurIGValue(0x%02x)  <====\n",__FUNCTION__,pDigTable->CurIGValue );		
++
++	DM_Write_DIG(pAdapter);
++
++}
++#endif
++
++static VOID
++dm_initial_gain_Multi_STA(
++	IN	PADAPTER	pAdapter)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	struct mlme_priv	*pmlmepriv = &(pAdapter->mlmepriv);
++	DIG_T			*pDigTable = &pdmpriv->DM_DigTable;
++	int				rssi_strength =  pdmpriv->EntryMinUndecoratedSmoothedPWDB;	
++	BOOLEAN			bMulti_STA = _FALSE;
++	
++#ifdef CONFIG_CONCURRENT_MODE
++	//AP Mode
++	if(check_buddy_fwstate(pAdapter, WIFI_AP_STATE) == _TRUE && (rssi_strength !=0))
++	{
++		bMulti_STA = _TRUE;
++	}	
++	else if(pDigTable->CurMultiSTAConnectState == DIG_MultiSTA_CONNECT && rssi_strength==0) //STA+STA MODE
++	{
++		bMulti_STA = _TRUE;
++		rssi_strength = pdmpriv->UndecoratedSmoothedPWDB;		
++	}
++#endif //CONFIG_CONCURRENT_MODE
++
++
++	//ADHOC and AP Mode
++	if(check_fwstate(pmlmepriv, WIFI_AP_STATE|WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE) == _TRUE)
++	{
++		bMulti_STA = _TRUE;
++	}
++
++
++	if((bMulti_STA == _FALSE) 
++		|| (pDigTable->CurSTAConnectState == DIG_STA_DISCONNECT))	 
++	{
++		pdmpriv->binitialized = _FALSE;
++		pDigTable->Dig_Ext_Port_Stage = DIG_EXT_PORT_STAGE_MAX;
++		return;
++	}	
++	else if(pdmpriv->binitialized == _FALSE)
++	{
++		pdmpriv->binitialized = _TRUE;
++		pDigTable->Dig_Ext_Port_Stage = DIG_EXT_PORT_STAGE_0;
++		pDigTable->CurIGValue = 0x20;
++		DM_Write_DIG(pAdapter);
++	}
++
++	// Initial gain control by ap mode 
++	if(pDigTable->CurMultiSTAConnectState == DIG_MultiSTA_CONNECT)
++	{
++		if (	(rssi_strength < pDigTable->RssiLowThresh) 	&& 
++			(pDigTable->Dig_Ext_Port_Stage != DIG_EXT_PORT_STAGE_1))
++		{					
++			// Set to dig value to 0x20 for Luke's opinion after disable dig
++			if(pDigTable->Dig_Ext_Port_Stage == DIG_EXT_PORT_STAGE_2)
++			{
++				pDigTable->CurIGValue = 0x20;
++				DM_Write_DIG(pAdapter);				
++			}	
++			pDigTable->Dig_Ext_Port_Stage = DIG_EXT_PORT_STAGE_1;	
++		}	
++		else if (rssi_strength > pDigTable->RssiHighThresh)
++		{
++			pDigTable->Dig_Ext_Port_Stage = DIG_EXT_PORT_STAGE_2;
++			dm_CtrlInitGainByFA(pAdapter);
++		} 
++	}	
++	else if(pDigTable->Dig_Ext_Port_Stage != DIG_EXT_PORT_STAGE_0)
++	{
++		pDigTable->Dig_Ext_Port_Stage = DIG_EXT_PORT_STAGE_0;
++		pDigTable->CurIGValue = 0x20;
++		DM_Write_DIG(pAdapter);
++	}
++
++	//RT_TRACE(	COMP_DIG, DBG_LOUD, ("CurMultiSTAConnectState = %x Dig_Ext_Port_Stage %x\n", 
++	//			DM_DigTable.CurMultiSTAConnectState, DM_DigTable.Dig_Ext_Port_Stage));
++}
++
++static VOID 
++dm_initial_gain_STA_beforelinked(
++	IN	PADAPTER	pAdapter)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	DIG_T	*pDigTable = &pdmpriv->DM_DigTable;
++	PFALSE_ALARM_STATISTICS pFalseAlmCnt = &(pdmpriv->FalseAlmCnt);
++	
++	//CurrentIGI = pDM_DigTable->rx_gain_range_min;//pDM_DigTable->CurIGValue = pDM_DigTable->rx_gain_range_min
++	//ODM_RT_TRACE(pDM_Odm, ODM_COMP_DIG, ODM_DBG_LOUD, ("odm_DIG(): DIG BeforeLink\n"));
++	//2012.03.30 LukeLee: enable DIG before link but with very high thresholds
++	//	Updated by Albert 2012/09/27
++	//	Copy the same rule from 8192du code.
++      	if( pFalseAlmCnt->Cnt_all > 2000 )
++		pDigTable->CurIGValue += 2;
++	else if ( ( pFalseAlmCnt->Cnt_all > 1000 ) && ( pFalseAlmCnt->Cnt_all <= 1000 ) )
++		pDigTable->CurIGValue += 1;
++	else if(pFalseAlmCnt->Cnt_all < 500)
++		 pDigTable->CurIGValue -= 1;
++
++	//Check initial gain by upper/lower bound
++	if(pDigTable->CurIGValue >pDigTable->rx_gain_range_max)
++		pDigTable->CurIGValue = pDigTable->rx_gain_range_max;
++
++	if(pDigTable->CurIGValue < pDigTable->rx_gain_range_min)
++		pDigTable->CurIGValue = pDigTable->rx_gain_range_min;
++	
++	printk("%s ==> FalseAlmCnt->Cnt_all:%d CurIGValue:0x%02x \n",__FUNCTION__,pFalseAlmCnt->Cnt_all ,pDigTable->CurIGValue);		 
++}
++
++static VOID 
++dm_initial_gain_STA(
++	IN	PADAPTER	pAdapter)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	DIG_T	*pDigTable = &pdmpriv->DM_DigTable;
++	
++	//RT_TRACE(	COMP_DIG, DBG_LOUD, ("PreSTAConnectState = %x, CurSTAConnectState = %x\n", 
++	//			DM_DigTable.PreSTAConnectState, DM_DigTable.CurSTAConnectState));
++
++
++	if(pDigTable->PreSTAConnectState == pDigTable->CurSTAConnectState||
++	   pDigTable->CurSTAConnectState == DIG_STA_BEFORE_CONNECT ||
++	   pDigTable->CurSTAConnectState == DIG_STA_CONNECT)
++	{
++		// beforeconnect -> beforeconnect or  connect -> connect
++		// (dis)connect -> beforeconnect
++		// disconnect -> connecct or beforeconnect -> connect
++		if(pDigTable->CurSTAConnectState != DIG_STA_DISCONNECT)
++		{
++			pDigTable->Rssi_val_min = dm_initial_gain_MinPWDB(pAdapter);
++			dm_CtrlInitGainByRssi(pAdapter);
++		}	
++#if 0
++		else if((wdev_to_priv(pAdapter->rtw_wdev))->p2p_enabled == _TRUE 
++				&& pAdapter->wdinfo.driver_interface == DRIVER_CFG80211)
++		{
++			//pDigTable->CurIGValue = 0x30;
++			DM_Write_DIG(pAdapter);
++		}
++#endif
++		else{ // pDigTable->CurSTAConnectState == DIG_STA_DISCONNECT 
++		#ifdef CONFIG_BEFORE_LINKED_DIG
++			//printk("%s==> ##1 CurIGI(0x%02x),PreIGValue(0x%02x) \n",__FUNCTION__,pDigTable->CurIGValue,pDigTable->PreIGValue );
++			dm_initial_gain_STA_beforelinked(pAdapter);
++			DM_Write_DIG(pAdapter);
++		#endif //CONFIG_BEFORE_LINKED_DIG
++		}
++	}
++	else	
++	{		
++		// connect -> disconnect or beforeconnect -> disconnect
++		pDigTable->Rssi_val_min = 0;
++		pDigTable->Dig_Ext_Port_Stage = DIG_EXT_PORT_STAGE_MAX;
++		pDigTable->BackoffVal = DM_DIG_BACKOFF_DEFAULT;
++		pDigTable->CurIGValue = 0x20;
++		pDigTable->PreIGValue = 0;	
++		#ifdef CONFIG_BEFORE_LINKED_DIG			
++		//printk("%s==> ##2 CurIGI(0x%02x),PreIGValue(0x%02x) \n",__FUNCTION__,pDigTable->CurIGValue,pDigTable->PreIGValue );	
++		dm_initial_gain_STA_beforelinked(pAdapter);			 
++ 		#endif //CONFIG_BEFORE_LINKED_DIG
++		
++
++		DM_Write_DIG(pAdapter);
++	}
++
++}
++
++
++static void dm_CCK_PacketDetectionThresh(
++	IN	PADAPTER	pAdapter)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	PFALSE_ALARM_STATISTICS FalseAlmCnt = &(pdmpriv->FalseAlmCnt);
++	DIG_T	*pDigTable = &pdmpriv->DM_DigTable;
++
++	if(pDigTable->CurSTAConnectState == DIG_STA_CONNECT)
++	{
++		pDigTable->Rssi_val_min = dm_initial_gain_MinPWDB(pAdapter);
++		if(pDigTable->PreCCKPDState == CCK_PD_STAGE_LowRssi)
++		{
++			if(pDigTable->Rssi_val_min <= 25)
++				pDigTable->CurCCKPDState = CCK_PD_STAGE_LowRssi;
++			else
++				pDigTable->CurCCKPDState = CCK_PD_STAGE_HighRssi;
++		}
++		else{
++			if(pDigTable->Rssi_val_min <= 20)
++				pDigTable->CurCCKPDState = CCK_PD_STAGE_LowRssi;
++			else
++				pDigTable->CurCCKPDState = CCK_PD_STAGE_HighRssi;
++		}
++	}
++	else
++		pDigTable->CurCCKPDState=CCK_PD_STAGE_MAX;
++	
++	if(pDigTable->PreCCKPDState != pDigTable->CurCCKPDState)
++	{
++		if((pDigTable->CurCCKPDState == CCK_PD_STAGE_LowRssi)||
++			(pDigTable->CurCCKPDState == CCK_PD_STAGE_MAX))
++		{
++			PHY_SetBBReg(pAdapter, rCCK0_CCA, bMaskByte2, 0x83);
++				
++			//PHY_SetBBReg(pAdapter, rCCK0_System, bMaskByte1, 0x40);
++			//if(IS_92C_SERIAL(pHalData->VersionID))
++				//PHY_SetBBReg(pAdapter, rCCK0_FalseAlarmReport , bMaskByte2, 0xd7);
++		}
++		else
++		{
++			PHY_SetBBReg(pAdapter, rCCK0_CCA, bMaskByte2, 0xcd);
++			//PHY_SetBBReg(pAdapter,rCCK0_System, bMaskByte1, 0x47);
++			//if(IS_92C_SERIAL(pHalData->VersionID))
++				//PHY_SetBBReg(pAdapter, rCCK0_FalseAlarmReport , bMaskByte2, 0xd3);
++		}
++
++		pDigTable->PreCCKPDState = pDigTable->CurCCKPDState;
++	}
++	
++	//RT_TRACE(	COMP_DIG, DBG_LOUD, ("CCKPDStage=%x\n",pDigTable->CurCCKPDState));
++	//RT_TRACE(	COMP_DIG, DBG_LOUD, ("is92C=%x\n",IS_92C_SERIAL(pHalData->VersionID)));
++	
++}
++
++
++static	void
++dm_CtrlInitGainByTwoPort(
++	IN	PADAPTER	pAdapter)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	struct mlme_priv	*pmlmepriv = &(pAdapter->mlmepriv);
++	DIG_T	*pDigTable = &pdmpriv->DM_DigTable;
++
++	if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE)
++	{
++#ifdef CONFIG_IOCTL_CFG80211
++		if((wdev_to_priv(pAdapter->rtw_wdev))->p2p_enabled == _TRUE)
++		{
++		}
++		else
++#endif
++			return;
++	}
++
++	// Decide the current status and if modify initial gain or not
++	if (check_fwstate(pmlmepriv, _FW_UNDER_LINKING) == _TRUE)
++	{
++		pDigTable->CurSTAConnectState = DIG_STA_BEFORE_CONNECT;
++	}
++	else if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) 
++	{
++		pDigTable->CurSTAConnectState = DIG_STA_CONNECT;
++	}	
++	else
++	{
++		pDigTable->CurSTAConnectState = DIG_STA_DISCONNECT;
++	}
++	
++
++	pDigTable->CurMultiSTAConnectState = DIG_MultiSTA_DISCONNECT;
++	if(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE) == _TRUE)
++	{
++		if((is_IBSS_empty(pAdapter)==_FAIL) && (pAdapter->stapriv.asoc_sta_count > 2))
++			pDigTable->CurMultiSTAConnectState = DIG_MultiSTA_CONNECT;
++	}
++	
++	if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE)
++	{
++		if(pAdapter->stapriv.asoc_sta_count > 2)
++			pDigTable->CurMultiSTAConnectState = DIG_MultiSTA_CONNECT;					
++	}
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if(check_buddy_fwstate(pAdapter, WIFI_AP_STATE) == _TRUE)
++	{
++		PADAPTER pbuddy_adapter = pAdapter->pbuddy_adapter;
++		
++		if(pbuddy_adapter->stapriv.asoc_sta_count > 2)
++		{
++			pDigTable->CurSTAConnectState = DIG_STA_CONNECT;
++			pDigTable->CurMultiSTAConnectState = DIG_MultiSTA_CONNECT;	
++		}	
++	}	
++	else if(check_buddy_fwstate(pAdapter, WIFI_STATION_STATE) == _TRUE	&& 
++		check_buddy_fwstate(pAdapter, _FW_LINKED) == _TRUE)
++	{
++		pDigTable->CurSTAConnectState = DIG_STA_CONNECT;
++
++	}
++#endif //CONFIG_CONCURRENT_MODE
++
++
++	dm_initial_gain_STA(pAdapter);
++	dm_initial_gain_Multi_STA(pAdapter);
++	//Baron temp DIG solution for DMP
++	//dm_CtrlInitGainByFA(pAdapter);
++
++	dm_CCK_PacketDetectionThresh(pAdapter);
++
++	pDigTable->PreSTAConnectState = pDigTable->CurSTAConnectState;
++	
++}
++
++
++static void dm_DIG(
++	IN	PADAPTER	pAdapter)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	DIG_T	*pDigTable = &pdmpriv->DM_DigTable;
++
++	//Read 0x0c50; Initial gain
++	pDigTable->PreIGValue = (u8)PHY_QueryBBReg(pAdapter, rOFDM0_XAAGCCore1, bMaskByte0);
++
++	//RTPRINT(FDM, DM_Monitor, ("dm_DIG() ==>\n"));
++	
++	if(pdmpriv->bDMInitialGainEnable == _FALSE)
++		return;
++	
++	//if(pDigTable->Dig_Enable_Flag == _FALSE)
++	//	return;
++	
++	if(!(pdmpriv->DMFlag & DYNAMIC_FUNC_DIG))
++		return;
++	
++	//RTPRINT(FDM, DM_Monitor, ("dm_DIG() progress \n"));
++
++	dm_CtrlInitGainByTwoPort(pAdapter);
++	
++	//RTPRINT(FDM, DM_Monitor, ("dm_DIG() <==\n"));
++}
++
++static void dm_SavePowerIndex(IN	PADAPTER	Adapter)
++{
++	u8			index;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	u32			Power_Index_REG[6] = {0xc90, 0xc91, 0xc92, 0xc98, 0xc99, 0xc9a};
++	
++	for(index = 0; index< 6; index++)
++		pdmpriv->PowerIndex_backup[index] = rtw_read8(Adapter, Power_Index_REG[index]);
++}
++
++static void dm_RestorePowerIndex(IN	PADAPTER	Adapter)
++{
++	u8			index;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	u32			Power_Index_REG[6] = {0xc90, 0xc91, 0xc92, 0xc98, 0xc99, 0xc9a};
++	
++	for(index = 0; index< 6; index++)
++		rtw_write8(Adapter, Power_Index_REG[index], pdmpriv->PowerIndex_backup[index]);
++}
++
++static void dm_WritePowerIndex(
++		IN	PADAPTER	Adapter, 
++		IN 	u8		Value)
++{
++	u8			index;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	u32			Power_Index_REG[6] = {0xc90, 0xc91, 0xc92, 0xc98, 0xc99, 0xc9a};
++	
++	for(index = 0; index< 6; index++)
++		rtw_write8(Adapter, Power_Index_REG[index], Value);
++}
++
++static void dm_InitDynamicTxPower(IN	PADAPTER	Adapter)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++
++#ifdef CONFIG_USB_HCI
++#ifdef CONFIG_INTEL_PROXIM
++	if((pHalData->BoardType == BOARD_USB_High_PA)||(Adapter->proximity.proxim_support==_TRUE))
++#else
++	if(pHalData->BoardType == BOARD_USB_High_PA)
++#endif
++	{
++		dm_SavePowerIndex(Adapter);
++		pdmpriv->bDynamicTxPowerEnable = _TRUE;
++	}		
++	else	
++#else
++		pdmpriv->bDynamicTxPowerEnable = _FALSE;
++#endif
++
++	pdmpriv->LastDTPLvl = TxHighPwrLevel_Normal;
++	pdmpriv->DynamicTxHighPowerLvl = TxHighPwrLevel_Normal;
++}
++
++
++static void dm_DynamicTxPower(IN	PADAPTER	Adapter)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	struct mlme_priv	*pmlmepriv = &(Adapter->mlmepriv);
++	struct mlme_ext_priv	*pmlmeext = &Adapter->mlmeextpriv;
++	int	UndecoratedSmoothedPWDB;
++
++	if(!pdmpriv->bDynamicTxPowerEnable)
++		return;
++
++	// If dynamic high power is disabled.
++	if(!(pdmpriv->DMFlag & DYNAMIC_FUNC_HP) )
++	{
++		pdmpriv->DynamicTxHighPowerLvl = TxHighPwrLevel_Normal;
++		return;
++	}
++
++	// STA not connected and AP not connected
++	if((check_fwstate(pmlmepriv, _FW_LINKED) != _TRUE) &&	
++		(pdmpriv->EntryMinUndecoratedSmoothedPWDB == 0))
++	{
++		//RT_TRACE(COMP_HIPWR, DBG_LOUD, ("Not connected to any \n"));
++		pdmpriv->DynamicTxHighPowerLvl = TxHighPwrLevel_Normal;
++
++		//the LastDTPlvl should reset when disconnect, 
++		//otherwise the tx power level wouldn't change when disconnect and connect again.
++		// Maddest 20091220.
++		pdmpriv->LastDTPLvl=TxHighPwrLevel_Normal;
++		return;
++	}
++#ifdef CONFIG_INTEL_PROXIM
++	if(Adapter->proximity.proxim_on== _TRUE){
++		struct proximity_priv *prox_priv=Adapter->proximity.proximity_priv;
++	// Intel set fixed tx power 
++	printk("\n %s  Adapter->proximity.proxim_on=%d prox_priv->proxim_modeinfo->power_output=%d \n",__FUNCTION__,Adapter->proximity.proxim_on,prox_priv->proxim_modeinfo->power_output);
++	if(prox_priv!=NULL){
++	if(prox_priv->proxim_modeinfo->power_output> 0)
++	
++	{
++		switch(prox_priv->proxim_modeinfo->power_output){
++			case 1:
++				pdmpriv->DynamicTxHighPowerLvl  = TxHighPwrLevel_100;
++				printk("TxHighPwrLevel_100\n");
++				break;
++			case 2:
++				pdmpriv->DynamicTxHighPowerLvl  = TxHighPwrLevel_70;
++				printk("TxHighPwrLevel_70\n");
++				break;
++			case 3:
++				pdmpriv->DynamicTxHighPowerLvl  = TxHighPwrLevel_50;
++				printk("TxHighPwrLevel_50\n");
++				break;
++			case 4:
++				pdmpriv->DynamicTxHighPowerLvl  = TxHighPwrLevel_35;
++				printk("TxHighPwrLevel_35\n");
++				break;
++			case 5:
++				pdmpriv->DynamicTxHighPowerLvl  = TxHighPwrLevel_15;
++				printk("TxHighPwrLevel_15\n");
++				break;
++			default:
++				pdmpriv->DynamicTxHighPowerLvl = TxHighPwrLevel_100;
++				printk("TxHighPwrLevel_100\n");
++				break;
++		}		
++	}
++	}
++	}
++	else
++#endif		
++{
++	if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)	// Default port
++	{
++		//todo: AP Mode
++		if ((check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE) ||
++		       (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == _TRUE))
++		{
++			UndecoratedSmoothedPWDB = pdmpriv->EntryMinUndecoratedSmoothedPWDB;
++			//RT_TRACE(COMP_HIPWR, DBG_LOUD, ("AP Client PWDB = 0x%x \n", UndecoratedSmoothedPWDB));
++		}
++		else
++		{
++			UndecoratedSmoothedPWDB = pdmpriv->UndecoratedSmoothedPWDB;
++			//RT_TRACE(COMP_HIPWR, DBG_LOUD, ("STA Default Port PWDB = 0x%x \n", UndecoratedSmoothedPWDB));
++		}
++	}
++	else // associated entry pwdb
++	{	
++		UndecoratedSmoothedPWDB = pdmpriv->EntryMinUndecoratedSmoothedPWDB;
++		//RT_TRACE(COMP_HIPWR, DBG_LOUD, ("AP Ext Port PWDB = 0x%x \n", UndecoratedSmoothedPWDB));
++	}
++		
++	if(UndecoratedSmoothedPWDB >= TX_POWER_NEAR_FIELD_THRESH_LVL2)
++	{
++		pdmpriv->DynamicTxHighPowerLvl = TxHighPwrLevel_Level2;
++		//RT_TRACE(COMP_HIPWR, DBG_LOUD, ("TxHighPwrLevel_Level1 (TxPwr=0x0)\n"));
++	}
++	else if((UndecoratedSmoothedPWDB < (TX_POWER_NEAR_FIELD_THRESH_LVL2-3)) &&
++		(UndecoratedSmoothedPWDB >= TX_POWER_NEAR_FIELD_THRESH_LVL1) )
++	{
++		pdmpriv->DynamicTxHighPowerLvl = TxHighPwrLevel_Level1;
++		//RT_TRACE(COMP_HIPWR, DBG_LOUD, ("TxHighPwrLevel_Level1 (TxPwr=0x10)\n"));
++	}
++	else if(UndecoratedSmoothedPWDB < (TX_POWER_NEAR_FIELD_THRESH_LVL1-5))
++	{
++		pdmpriv->DynamicTxHighPowerLvl = TxHighPwrLevel_Normal;
++		//RT_TRACE(COMP_HIPWR, DBG_LOUD, ("TxHighPwrLevel_Normal\n"));
++	}
++}
++	if( (pdmpriv->DynamicTxHighPowerLvl != pdmpriv->LastDTPLvl) )
++	{
++		PHY_SetTxPowerLevel8192C(Adapter, pHalData->CurrentChannel);
++		if(pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Normal) // HP1 -> Normal  or HP2 -> Normal
++			dm_RestorePowerIndex(Adapter);
++		else if(pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1)
++			dm_WritePowerIndex(Adapter, 0x14);
++		else if(pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level2)
++			dm_WritePowerIndex(Adapter, 0x10);
++	}
++	pdmpriv->LastDTPLvl = pdmpriv->DynamicTxHighPowerLvl;
++	
++}
++
++
++static VOID
++DM_ChangeDynamicInitGainThresh(
++	IN	PADAPTER	pAdapter,
++	IN	u32		DM_Type,
++	IN	u32		DM_Value)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	DIG_T	*pDigTable = &pdmpriv->DM_DigTable;
++
++	if (DM_Type == DIG_TYPE_THRESH_HIGH)
++	{
++		pDigTable->RssiHighThresh = DM_Value;		
++	}
++	else if (DM_Type == DIG_TYPE_THRESH_LOW)
++	{
++		pDigTable->RssiLowThresh = DM_Value;
++	}
++	else if (DM_Type == DIG_TYPE_ENABLE)
++	{
++		pDigTable->Dig_Enable_Flag = _TRUE;
++	}	
++	else if (DM_Type == DIG_TYPE_DISABLE)
++	{
++		pDigTable->Dig_Enable_Flag = _FALSE;
++	}	
++	else if (DM_Type == DIG_TYPE_BACKOFF)
++	{
++		if(DM_Value > 30)
++			DM_Value = 30;
++		pDigTable->BackoffVal = (u8)DM_Value;
++	}
++	else if(DM_Type == DIG_TYPE_RX_GAIN_MIN)
++	{
++		if(DM_Value == 0)
++			DM_Value = 0x1;
++		pDigTable->rx_gain_range_min = (u8)DM_Value;
++	}
++	else if(DM_Type == DIG_TYPE_RX_GAIN_MAX)
++	{
++		if(DM_Value > 0x50)
++			DM_Value = 0x50;
++		pDigTable->rx_gain_range_max = (u8)DM_Value;
++	}
++}	/* DM_ChangeDynamicInitGainThresh */
++
++
++static VOID PWDB_Monitor(
++	IN	PADAPTER	Adapter
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	int	i;
++	int	tmpEntryMaxPWDB=0, tmpEntryMinPWDB=0xff;
++	u8 	sta_cnt=0;
++	u32 PWDB_rssi[NUM_STA]={0};//[0~15]:MACID, [16~31]:PWDB_rssi
++
++	if(check_fwstate(&Adapter->mlmepriv, _FW_LINKED) != _TRUE)
++		return;
++
++
++	if(check_fwstate(&Adapter->mlmepriv, WIFI_AP_STATE|WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE) == _TRUE)
++	{
++		_irqL irqL;
++		_list	*plist, *phead;
++		struct sta_info *psta;
++		struct sta_priv *pstapriv = &Adapter->stapriv;
++		u8 bcast_addr[ETH_ALEN]= {0xff,0xff,0xff,0xff,0xff,0xff};
++	
++		_enter_critical_bh(&pstapriv->sta_hash_lock, &irqL);
++
++		for(i=0; i< NUM_STA; i++)
++		{
++			phead = &(pstapriv->sta_hash[i]);
++			plist = get_next(phead);
++		
++			while ((rtw_end_of_queue_search(phead, plist)) == _FALSE)
++			{
++				psta = LIST_CONTAINOR(plist, struct sta_info, hash_list);
++
++				plist = get_next(plist);
++
++				if(_rtw_memcmp(psta	->hwaddr, bcast_addr, ETH_ALEN) || 
++					_rtw_memcmp(psta->hwaddr, myid(&Adapter->eeprompriv), ETH_ALEN))
++					continue;
++
++				if(psta->state & WIFI_ASOC_STATE)
++				{
++					
++					if(psta->rssi_stat.UndecoratedSmoothedPWDB < tmpEntryMinPWDB)
++						tmpEntryMinPWDB = psta->rssi_stat.UndecoratedSmoothedPWDB;
++
++					if(psta->rssi_stat.UndecoratedSmoothedPWDB > tmpEntryMaxPWDB)
++						tmpEntryMaxPWDB = psta->rssi_stat.UndecoratedSmoothedPWDB;
++
++					PWDB_rssi[sta_cnt++] = (psta->mac_id | (psta->rssi_stat.UndecoratedSmoothedPWDB<<16));
++				}
++			
++			}
++
++		}
++	
++		_exit_critical_bh(&pstapriv->sta_hash_lock, &irqL);
++
++
++		
++		if(pHalData->fw_ractrl == _TRUE)
++		{
++			// Report every sta's RSSI to FW
++			for(i=0; i< sta_cnt; i++)
++			{
++				rtl8192c_set_rssi_cmd(Adapter, (u8*)&PWDB_rssi[i]);
++			}
++		}
++
++	}
++
++
++
++	if(tmpEntryMaxPWDB != 0)	// If associated entry is found
++	{
++		pdmpriv->EntryMaxUndecoratedSmoothedPWDB = tmpEntryMaxPWDB;		
++	}
++	else
++	{
++		pdmpriv->EntryMaxUndecoratedSmoothedPWDB = 0;
++	}
++	
++	if(tmpEntryMinPWDB != 0xff) // If associated entry is found
++	{
++		pdmpriv->EntryMinUndecoratedSmoothedPWDB = tmpEntryMinPWDB;		
++	}
++	else
++	{
++		pdmpriv->EntryMinUndecoratedSmoothedPWDB = 0;
++	}
++
++
++	if(check_fwstate(&Adapter->mlmepriv, WIFI_STATION_STATE) == _TRUE)
++	{
++	
++		if(pHalData->fw_ractrl == _TRUE)
++		{
++			u32 param = (u32)(pdmpriv->UndecoratedSmoothedPWDB<<16);
++		
++			param |= 0;//macid=0 for sta mode;
++			
++			rtl8192c_set_rssi_cmd(Adapter, (u8*)&param);
++		}
++	}
++
++}
++
++
++static void
++DM_InitEdcaTurbo(
++	IN	PADAPTER	Adapter
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++
++	pHalData->bCurrentTurboEDCA = _FALSE;
++	Adapter->recvpriv.bIsAnyNonBEPkts = _FALSE;
++
++}
++
++
++static void
++dm_CheckEdcaTurbo(
++	IN	PADAPTER	Adapter
++	)
++{
++	u32 	trafficIndex;
++	u32	edca_param;
++	u64	cur_tx_bytes = 0;
++	u64	cur_rx_bytes = 0;
++	u8	bbtchange = _FALSE;
++	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv		*pdmpriv = &pHalData->dmpriv;
++	struct xmit_priv		*pxmitpriv = &(Adapter->xmitpriv);
++	struct recv_priv		*precvpriv = &(Adapter->recvpriv);
++	struct registry_priv	*pregpriv = &Adapter->registrypriv;
++	struct mlme_ext_priv	*pmlmeext = &(Adapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++#ifdef CONFIG_BT_COEXIST
++	struct btcoexist_priv	*pbtpriv = &(pHalData->bt_coexist);	
++#endif
++
++
++	if ((pregpriv->wifi_spec == 1) || (pmlmeinfo->HT_enable == 0))
++	{
++		goto dm_CheckEdcaTurbo_EXIT;
++	}
++
++	if (pmlmeinfo->assoc_AP_vendor >= maxAP)
++	{
++		goto dm_CheckEdcaTurbo_EXIT;
++	}
++
++#ifdef CONFIG_BT_COEXIST
++	if(pbtpriv->BT_Coexist)
++	{
++		if( (pbtpriv->BT_EDCA[UP_LINK]!=0) ||  (pbtpriv->BT_EDCA[DOWN_LINK]!=0))
++		{
++			bbtchange = _TRUE;		
++		}
++	}
++#endif
++
++	// Check if the status needs to be changed.
++	if((bbtchange) || (!precvpriv->bIsAnyNonBEPkts) )
++	{
++		cur_tx_bytes = pxmitpriv->tx_bytes - pxmitpriv->last_tx_bytes;
++		cur_rx_bytes = precvpriv->rx_bytes - precvpriv->last_rx_bytes;
++
++		//traffic, TX or RX
++		if((pmlmeinfo->assoc_AP_vendor == ralinkAP)||(pmlmeinfo->assoc_AP_vendor == atherosAP))
++		{
++			if (cur_tx_bytes > (cur_rx_bytes << 2))
++			{ // Uplink TP is present.
++				trafficIndex = UP_LINK; 
++			}
++			else
++			{ // Balance TP is present.
++				trafficIndex = DOWN_LINK;
++			}
++		}
++		else
++		{
++			if (cur_rx_bytes > (cur_tx_bytes << 2))
++			{ // Downlink TP is present.
++				trafficIndex = DOWN_LINK;
++			}
++			else
++			{ // Balance TP is present.
++				trafficIndex = UP_LINK;
++			}
++		}
++
++		if ((pdmpriv->prv_traffic_idx != trafficIndex) || (!pHalData->bCurrentTurboEDCA))
++		{
++#ifdef CONFIG_BT_COEXIST
++			if(_TRUE == bbtchange)
++			{
++				edca_param = pbtpriv->BT_EDCA[trafficIndex];
++			}
++			else
++#endif
++			{
++#if 0
++				//adjust EDCA parameter for BE queue
++				edca_param = EDCAParam[pmlmeinfo->assoc_AP_vendor][trafficIndex];
++#else
++
++				if((pmlmeinfo->assoc_AP_vendor == ciscoAP) && (pmlmeext->cur_wireless_mode & WIRELESS_11_24N))
++				{
++					edca_param = EDCAParam[pmlmeinfo->assoc_AP_vendor][trafficIndex];
++				}
++				else
++				{
++					edca_param = EDCAParam[unknownAP][trafficIndex];
++				}
++#endif
++			}
++
++#ifdef CONFIG_PCI_HCI
++			if(IS_92C_SERIAL(pHalData->VersionID))
++			{
++				edca_param = 0x60a42b;
++			}
++			else
++			{
++				edca_param = 0x6ea42b;
++			}
++#endif
++			rtw_write32(Adapter, REG_EDCA_BE_PARAM, edca_param);
++
++			pdmpriv->prv_traffic_idx = trafficIndex;
++		}
++		
++		pHalData->bCurrentTurboEDCA = _TRUE;
++	}
++	else
++	{
++		//
++		// Turn Off EDCA turbo here.
++		// Restore original EDCA according to the declaration of AP.
++		//
++		 if(pHalData->bCurrentTurboEDCA)
++		{
++			rtw_write32(Adapter, REG_EDCA_BE_PARAM, pHalData->AcParam_BE);
++			pHalData->bCurrentTurboEDCA = _FALSE;
++		}
++	}
++
++dm_CheckEdcaTurbo_EXIT:
++	// Set variables for next time.
++	precvpriv->bIsAnyNonBEPkts = _FALSE;
++	pxmitpriv->last_tx_bytes = pxmitpriv->tx_bytes;
++	precvpriv->last_rx_bytes = precvpriv->rx_bytes;
++
++}
++
++#define DPK_DELTA_MAPPING_NUM	13
++#define index_mapping_HP_NUM		15
++
++static	VOID
++dm_TXPowerTrackingCallback_ThermalMeter_92C(
++            IN PADAPTER	Adapter)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	u8			ThermalValue = 0, delta, delta_LCK, delta_IQK, delta_HP, TimeOut = 100;
++	int 			ele_A, ele_D, TempCCk, X, value32;
++	int			Y, ele_C;
++	s8			OFDM_index[2], CCK_index = 0, OFDM_index_old[2], CCK_index_old = 0;
++	int			i = 0;
++	BOOLEAN		is2T = IS_92C_SERIAL(pHalData->VersionID);
++
++#if MP_DRIVER == 1
++	PMPT_CONTEXT	pMptCtx = &(Adapter->mppriv.MptCtx);	
++	u8			*TxPwrLevel = pMptCtx->TxPwrLevel;
++#endif
++	u8			OFDM_min_index = 6, rf; //OFDM BB Swing should be less than +3.0dB, which is required by Arthur
++#if 0
++	u32			DPK_delta_mapping[2][DPK_DELTA_MAPPING_NUM] = {
++					{0x1c, 0x1c, 0x1d, 0x1d, 0x1e, 
++					 0x1f, 0x00, 0x00, 0x01, 0x01,
++					 0x02, 0x02, 0x03},
++					{0x1c, 0x1d, 0x1e, 0x1e, 0x1e,
++					 0x1f, 0x00, 0x00, 0x01, 0x02,
++					 0x02, 0x03, 0x03}};
++#endif
++#ifdef CONFIG_USB_HCI
++	u8			ThermalValue_HP_count = 0;
++	u32			ThermalValue_HP = 0;
++	s32			index_mapping_HP[index_mapping_HP_NUM] = {
++					0,	1,	3,	4,	6,	
++					7,	9,	10,	12,	13,	
++					15,	16,	18,	19,	21
++					};
++
++	s8			index_HP;
++#endif
++
++	pdmpriv->TXPowerTrackingCallbackCnt++;	//cosa add for debug
++	pdmpriv->bTXPowerTrackingInit = _TRUE;
++
++	if(pHalData->CurrentChannel == 14 && !pdmpriv->bCCKinCH14)
++		pdmpriv->bCCKinCH14 = _TRUE;
++	else if(pHalData->CurrentChannel != 14 && pdmpriv->bCCKinCH14)
++		pdmpriv->bCCKinCH14 = _FALSE;
++
++	//DBG_8192C("===>dm_TXPowerTrackingCallback_ThermalMeter_92C\n");
++
++	ThermalValue = (u8)PHY_QueryRFReg(Adapter, RF_PATH_A, RF_T_METER, 0x1f);	// 0x24: RF Reg[4:0]	
++
++	//DBG_8192C("\n\nReadback Thermal Meter = 0x%x pre thermal meter 0x%x EEPROMthermalmeter 0x%x\n",ThermalValue,pdmpriv->ThermalValue,  pHalData->EEPROMThermalMeter);
++
++	rtl8192c_PHY_APCalibrate(Adapter, (ThermalValue - pHalData->EEPROMThermalMeter));
++
++	if(is2T)
++		rf = 2;
++	else
++		rf = 1;
++	
++	if(ThermalValue)
++	{
++//		if(!pHalData->ThermalValue)
++		{
++			//Query OFDM path A default setting 		
++			ele_D = PHY_QueryBBReg(Adapter, rOFDM0_XATxIQImbalance, bMaskDWord)&bMaskOFDM_D;
++			for(i=0; i<OFDM_TABLE_SIZE_92C; i++)	//find the index
++			{
++				if(ele_D == (OFDMSwingTable[i]&bMaskOFDM_D))
++				{
++					OFDM_index_old[0] = (u8)i;
++					//DBG_8192C("Initial pathA ele_D reg0x%x = 0x%x, OFDM_index=0x%x\n", rOFDM0_XATxIQImbalance, ele_D, OFDM_index_old[0]);
++					break;
++				}
++			}
++
++			//Query OFDM path B default setting 
++			if(is2T)
++			{
++				ele_D = PHY_QueryBBReg(Adapter, rOFDM0_XBTxIQImbalance, bMaskDWord)&bMaskOFDM_D;
++				for(i=0; i<OFDM_TABLE_SIZE_92C; i++)	//find the index
++				{
++					if(ele_D == (OFDMSwingTable[i]&bMaskOFDM_D))
++					{
++						OFDM_index_old[1] = (u8)i;
++						//DBG_8192C("Initial pathB ele_D reg0x%x = 0x%x, OFDM_index=0x%x\n",rOFDM0_XBTxIQImbalance, ele_D, OFDM_index_old[1]);
++						break;
++					}
++				}
++			}
++
++			//Query CCK default setting From 0xa24
++			TempCCk = PHY_QueryBBReg(Adapter, rCCK0_TxFilter2, bMaskDWord)&bMaskCCK;
++			for(i=0 ; i<CCK_TABLE_SIZE ; i++)
++			{
++				if(pdmpriv->bCCKinCH14)
++				{
++					if(_rtw_memcmp((void*)&TempCCk, (void*)&CCKSwingTable_Ch14[i][2], 4)==_TRUE)
++					{
++						CCK_index_old =(u8)i;
++						//DBG_8192C("Initial reg0x%x = 0x%x, CCK_index=0x%x, ch 14 %d\n", rCCK0_TxFilter2, TempCCk, CCK_index_old, pdmpriv->bCCKinCH14);
++						break;
++					}
++				}
++				else
++				{
++					if(_rtw_memcmp((void*)&TempCCk, (void*)&CCKSwingTable_Ch1_Ch13[i][2], 4)==_TRUE)
++					{
++						CCK_index_old =(u8)i;
++						//DBG_8192C("Initial reg0x%x = 0x%x, CCK_index=0x%x, ch14 %d\n", rCCK0_TxFilter2, TempCCk, CCK_index_old, pdmpriv->bCCKinCH14);
++						break;
++					}			
++				}
++			}	
++
++			if(!pdmpriv->ThermalValue)
++			{
++				pdmpriv->ThermalValue = pHalData->EEPROMThermalMeter;
++				pdmpriv->ThermalValue_LCK = ThermalValue;
++				pdmpriv->ThermalValue_IQK = ThermalValue;
++				pdmpriv->ThermalValue_DPK = pHalData->EEPROMThermalMeter;
++
++#ifdef CONFIG_USB_HCI
++				for(i = 0; i < rf; i++)
++					pdmpriv->OFDM_index_HP[i] = pdmpriv->OFDM_index[i] = OFDM_index_old[i];
++				pdmpriv->CCK_index_HP = pdmpriv->CCK_index = CCK_index_old;
++#else
++				for(i = 0; i < rf; i++)
++					pdmpriv->OFDM_index[i] = OFDM_index_old[i];
++				pdmpriv->CCK_index = CCK_index_old;
++#endif
++			}
++
++#ifdef CONFIG_USB_HCI
++			if(pHalData->BoardType == BOARD_USB_High_PA)
++			{
++				pdmpriv->ThermalValue_HP[pdmpriv->ThermalValue_HP_index] = ThermalValue;
++				pdmpriv->ThermalValue_HP_index++;
++				if(pdmpriv->ThermalValue_HP_index == HP_THERMAL_NUM)
++					pdmpriv->ThermalValue_HP_index = 0;
++
++				for(i = 0; i < HP_THERMAL_NUM; i++)
++				{
++					if(pdmpriv->ThermalValue_HP[i])
++					{
++						ThermalValue_HP += pdmpriv->ThermalValue_HP[i];
++						ThermalValue_HP_count++;
++					}			
++				}
++		
++				if(ThermalValue_HP_count)
++					ThermalValue = (u8)(ThermalValue_HP / ThermalValue_HP_count);
++			}
++#endif
++		}
++
++		delta = (ThermalValue > pdmpriv->ThermalValue)?(ThermalValue - pdmpriv->ThermalValue):(pdmpriv->ThermalValue - ThermalValue);
++#ifdef CONFIG_USB_HCI
++		if(pHalData->BoardType == BOARD_USB_High_PA)
++		{
++			if(pdmpriv->bDoneTxpower)
++				delta_HP = (ThermalValue > pdmpriv->ThermalValue)?(ThermalValue - pdmpriv->ThermalValue):(pdmpriv->ThermalValue - ThermalValue);
++			else
++				delta_HP = ThermalValue > pHalData->EEPROMThermalMeter?(ThermalValue - pHalData->EEPROMThermalMeter):(pHalData->EEPROMThermalMeter - ThermalValue);						
++		}
++		else
++#endif	
++		{
++			delta_HP = 0;			
++		}
++		delta_LCK = (ThermalValue > pdmpriv->ThermalValue_LCK)?(ThermalValue - pdmpriv->ThermalValue_LCK):(pdmpriv->ThermalValue_LCK - ThermalValue);
++		delta_IQK = (ThermalValue > pdmpriv->ThermalValue_IQK)?(ThermalValue - pdmpriv->ThermalValue_IQK):(pdmpriv->ThermalValue_IQK - ThermalValue);
++
++		//DBG_8192C("Readback Thermal Meter = 0x%lx pre thermal meter 0x%lx EEPROMthermalmeter 0x%lx delta 0x%lx delta_LCK 0x%lx delta_IQK 0x%lx\n", ThermalValue, pHalData->ThermalValue, pHalData->EEPROMThermalMeter, delta, delta_LCK, delta_IQK);
++
++		if(delta_LCK > 1)
++		{
++			pdmpriv->ThermalValue_LCK = ThermalValue;
++			rtl8192c_PHY_LCCalibrate(Adapter);
++		}
++		
++		if((delta > 0 || delta_HP > 0) && pdmpriv->TxPowerTrackControl)
++		{
++#ifdef CONFIG_USB_HCI
++			if(pHalData->BoardType == BOARD_USB_High_PA)
++			{
++				pdmpriv->bDoneTxpower = _TRUE;
++				delta_HP = ThermalValue > pHalData->EEPROMThermalMeter?(ThermalValue - pHalData->EEPROMThermalMeter):(pHalData->EEPROMThermalMeter - ThermalValue);						
++				
++				if(delta_HP > index_mapping_HP_NUM-1)					
++					index_HP = index_mapping_HP[index_mapping_HP_NUM-1];
++				else
++					index_HP = index_mapping_HP[delta_HP];
++				
++				if(ThermalValue > pHalData->EEPROMThermalMeter)	//set larger Tx power
++				{
++					for(i = 0; i < rf; i++)
++					 	OFDM_index[i] = pdmpriv->OFDM_index_HP[i] - index_HP;
++					CCK_index = pdmpriv->CCK_index_HP -index_HP;						
++				}
++				else
++				{
++					for(i = 0; i < rf; i++)
++						OFDM_index[i] = pdmpriv->OFDM_index_HP[i] + index_HP;
++					CCK_index = pdmpriv->CCK_index_HP + index_HP;						
++				}	
++				
++				delta_HP = (ThermalValue > pdmpriv->ThermalValue)?(ThermalValue - pdmpriv->ThermalValue):(pdmpriv->ThermalValue - ThermalValue);
++				
++			}
++			else
++#endif
++			{
++				if(ThermalValue > pdmpriv->ThermalValue)
++				{ 
++					for(i = 0; i < rf; i++)
++					 	pdmpriv->OFDM_index[i] -= delta;
++					pdmpriv->CCK_index -= delta;
++				}
++				else
++				{
++					for(i = 0; i < rf; i++)			
++						pdmpriv->OFDM_index[i] += delta;
++					pdmpriv->CCK_index += delta;
++				}
++			}
++
++			/*if(is2T)
++			{
++				DBG_8192C("temp OFDM_A_index=0x%x, OFDM_B_index=0x%x, CCK_index=0x%x\n", 
++					pdmpriv->OFDM_index[0], pdmpriv->OFDM_index[1], pdmpriv->CCK_index);
++			}
++			else
++			{
++				DBG_8192C("temp OFDM_A_index=0x%x, CCK_index=0x%x\n",
++					pdmpriv->OFDM_index[0], pdmpriv->CCK_index);
++			}*/
++
++			//no adjust
++#ifdef CONFIG_USB_HCI
++			if(pHalData->BoardType != BOARD_USB_High_PA)
++#endif
++			{
++				if(ThermalValue > pHalData->EEPROMThermalMeter)
++				{
++					for(i = 0; i < rf; i++)			
++						OFDM_index[i] = pdmpriv->OFDM_index[i]+1;
++					CCK_index = pdmpriv->CCK_index+1;			
++				}
++				else
++				{
++					for(i = 0; i < rf; i++)			
++						OFDM_index[i] = pdmpriv->OFDM_index[i];
++					CCK_index = pdmpriv->CCK_index;						
++				}
++
++#if MP_DRIVER == 1
++				for(i = 0; i < rf; i++)
++				{
++					if(TxPwrLevel[i] >=0 && TxPwrLevel[i] <=26)
++					{
++						if(ThermalValue > pHalData->EEPROMThermalMeter)
++						{
++							if (delta < 5)
++								OFDM_index[i] -= 1;					
++							else 
++								OFDM_index[i] -= 2;					
++						}
++						else if(delta > 5 && ThermalValue < pHalData->EEPROMThermalMeter)
++						{
++							OFDM_index[i] += 1;
++						}
++					}
++					else if (TxPwrLevel[i] >= 27 && TxPwrLevel[i] <= 32 && ThermalValue > pHalData->EEPROMThermalMeter)
++					{
++						if (delta < 5)
++							OFDM_index[i] -= 1;					
++						else 
++							OFDM_index[i] -= 2;								
++					}
++					else if (TxPwrLevel[i] >= 32 && TxPwrLevel[i] <= 38 && ThermalValue > pHalData->EEPROMThermalMeter && delta > 5)
++					{
++						OFDM_index[i] -= 1;								
++					}
++				}
++
++				{
++					if(TxPwrLevel[i] >=0 && TxPwrLevel[i] <=26)
++					{
++						if(ThermalValue > pHalData->EEPROMThermalMeter)
++						{
++							if (delta < 5)
++								CCK_index -= 1; 				
++							else 
++								CCK_index -= 2; 				
++						}
++						else if(delta > 5 && ThermalValue < pHalData->EEPROMThermalMeter)
++						{
++							CCK_index += 1;
++						}
++					}
++					else if (TxPwrLevel[i] >= 27 && TxPwrLevel[i] <= 32 && ThermalValue > pHalData->EEPROMThermalMeter)
++					{
++						if (delta < 5)
++							CCK_index -= 1; 				
++						else 
++							CCK_index -= 2; 							
++					}
++					else if (TxPwrLevel[i] >= 32 && TxPwrLevel[i] <= 38 && ThermalValue > pHalData->EEPROMThermalMeter && delta > 5)
++					{
++						CCK_index -= 1; 							
++					}
++				}
++#endif
++			}
++
++			for(i = 0; i < rf; i++)
++			{
++				if(OFDM_index[i] > (OFDM_TABLE_SIZE_92C-1))
++					OFDM_index[i] = (OFDM_TABLE_SIZE_92C-1);
++				else if (OFDM_index[i] < OFDM_min_index)
++					OFDM_index[i] = OFDM_min_index;
++			}
++						
++			if(CCK_index > (CCK_TABLE_SIZE-1))
++				CCK_index = (CCK_TABLE_SIZE-1);
++			else if (CCK_index < 0)
++				CCK_index = 0;		
++
++			/*if(is2T)
++			{
++				DBG_8192C("new OFDM_A_index=0x%x, OFDM_B_index=0x%x, CCK_index=0x%x\n", 
++					OFDM_index[0], OFDM_index[1], CCK_index);
++			}
++			else
++			{
++				DBG_8192C("new OFDM_A_index=0x%x, CCK_index=0x%x\n", 
++					OFDM_index[0], CCK_index);
++			}*/
++		}
++
++		if(pdmpriv->TxPowerTrackControl && (delta != 0 || delta_HP != 0))
++		{
++			//Adujst OFDM Ant_A according to IQK result
++			ele_D = (OFDMSwingTable[OFDM_index[0]] & 0xFFC00000)>>22;
++			X = pdmpriv->RegE94;
++			Y = pdmpriv->RegE9C;		
++
++			if(X != 0)
++			{
++				if ((X & 0x00000200) != 0)
++					X = X | 0xFFFFFC00;
++				ele_A = ((X * ele_D)>>8)&0x000003FF;
++					
++				//new element C = element D x Y
++				if ((Y & 0x00000200) != 0)
++					Y = Y | 0xFFFFFC00;
++				ele_C = ((Y * ele_D)>>8)&0x000003FF;
++				
++				//wirte new elements A, C, D to regC80 and regC94, element B is always 0
++				value32 = (ele_D<<22)|((ele_C&0x3F)<<16)|ele_A;
++				PHY_SetBBReg(Adapter, rOFDM0_XATxIQImbalance, bMaskDWord, value32);
++				
++				value32 = (ele_C&0x000003C0)>>6;
++				PHY_SetBBReg(Adapter, rOFDM0_XCTxAFE, bMaskH4Bits, value32);
++
++				value32 = ((X * ele_D)>>7)&0x01;
++				PHY_SetBBReg(Adapter, rOFDM0_ECCAThreshold, BIT31, value32);
++
++				value32 = ((Y * ele_D)>>7)&0x01;
++				PHY_SetBBReg(Adapter, rOFDM0_ECCAThreshold, BIT29, value32);
++
++			}
++			else
++			{
++				PHY_SetBBReg(Adapter, rOFDM0_XATxIQImbalance, bMaskDWord, OFDMSwingTable[OFDM_index[0]]);				
++				PHY_SetBBReg(Adapter, rOFDM0_XCTxAFE, bMaskH4Bits, 0x00);
++				PHY_SetBBReg(Adapter, rOFDM0_ECCAThreshold, BIT31|BIT29, 0x00);
++			}
++
++			//RTPRINT(FINIT, INIT_IQK, ("TxPwrTracking path A: X = 0x%x, Y = 0x%x ele_A = 0x%x ele_C = 0x%x ele_D = 0x%x\n", X, Y, ele_A, ele_C, ele_D));		
++
++			//Adjust CCK according to IQK result
++			if(!pdmpriv->bCCKinCH14){
++				rtw_write8(Adapter, 0xa22, CCKSwingTable_Ch1_Ch13[CCK_index][0]);
++				rtw_write8(Adapter, 0xa23, CCKSwingTable_Ch1_Ch13[CCK_index][1]);
++				rtw_write8(Adapter, 0xa24, CCKSwingTable_Ch1_Ch13[CCK_index][2]);
++				rtw_write8(Adapter, 0xa25, CCKSwingTable_Ch1_Ch13[CCK_index][3]);
++				rtw_write8(Adapter, 0xa26, CCKSwingTable_Ch1_Ch13[CCK_index][4]);
++				rtw_write8(Adapter, 0xa27, CCKSwingTable_Ch1_Ch13[CCK_index][5]);
++				rtw_write8(Adapter, 0xa28, CCKSwingTable_Ch1_Ch13[CCK_index][6]);
++				rtw_write8(Adapter, 0xa29, CCKSwingTable_Ch1_Ch13[CCK_index][7]);
++			}
++			else{
++				rtw_write8(Adapter, 0xa22, CCKSwingTable_Ch14[CCK_index][0]);
++				rtw_write8(Adapter, 0xa23, CCKSwingTable_Ch14[CCK_index][1]);
++				rtw_write8(Adapter, 0xa24, CCKSwingTable_Ch14[CCK_index][2]);
++				rtw_write8(Adapter, 0xa25, CCKSwingTable_Ch14[CCK_index][3]);
++				rtw_write8(Adapter, 0xa26, CCKSwingTable_Ch14[CCK_index][4]);
++				rtw_write8(Adapter, 0xa27, CCKSwingTable_Ch14[CCK_index][5]);
++				rtw_write8(Adapter, 0xa28, CCKSwingTable_Ch14[CCK_index][6]);
++				rtw_write8(Adapter, 0xa29, CCKSwingTable_Ch14[CCK_index][7]);	
++			}		
++
++			if(is2T)
++			{						
++				ele_D = (OFDMSwingTable[(u8)OFDM_index[1]] & 0xFFC00000)>>22;
++				
++				//new element A = element D x X
++				X = pdmpriv->RegEB4;
++				Y = pdmpriv->RegEBC;
++				
++				if(X != 0){
++					if ((X & 0x00000200) != 0)	//consider minus
++						X = X | 0xFFFFFC00;
++					ele_A = ((X * ele_D)>>8)&0x000003FF;
++					
++					//new element C = element D x Y
++					if ((Y & 0x00000200) != 0)
++						Y = Y | 0xFFFFFC00;
++					ele_C = ((Y * ele_D)>>8)&0x00003FF;
++					
++					//wirte new elements A, C, D to regC88 and regC9C, element B is always 0
++					value32=(ele_D<<22)|((ele_C&0x3F)<<16) |ele_A;
++					PHY_SetBBReg(Adapter, rOFDM0_XBTxIQImbalance, bMaskDWord, value32);
++
++					value32 = (ele_C&0x000003C0)>>6;
++					PHY_SetBBReg(Adapter, rOFDM0_XDTxAFE, bMaskH4Bits, value32);	
++
++					value32 = ((X * ele_D)>>7)&0x01;
++					PHY_SetBBReg(Adapter, rOFDM0_ECCAThreshold, BIT27, value32);
++
++					value32 = ((Y * ele_D)>>7)&0x01;
++					PHY_SetBBReg(Adapter, rOFDM0_ECCAThreshold, BIT25, value32);
++
++				}
++				else{
++					PHY_SetBBReg(Adapter, rOFDM0_XBTxIQImbalance, bMaskDWord, OFDMSwingTable[OFDM_index[1]]);										
++					PHY_SetBBReg(Adapter, rOFDM0_XDTxAFE, bMaskH4Bits, 0x00);
++					PHY_SetBBReg(Adapter, rOFDM0_ECCAThreshold, BIT27|BIT25, 0x00);
++				}
++
++				//DBG_8192C("TxPwrTracking path B: X = 0x%x, Y = 0x%x ele_A = 0x%x ele_C = 0x%x ele_D = 0x%x\n", X, Y, ele_A, ele_C, ele_D);
++			}
++
++			/*
++			DBG_8192C("TxPwrTracking 0xc80 = 0x%x, 0xc94 = 0x%x RF 0x24 = 0x%x\n", \
++					PHY_QueryBBReg(Adapter, 0xc80, bMaskDWord),\
++					PHY_QueryBBReg(Adapter, 0xc94, bMaskDWord), \
++					PHY_QueryRFReg(Adapter, RF_PATH_A, 0x24, bMaskDWord));
++			*/
++		}
++
++#if MP_DRIVER == 1
++		if(delta_IQK > 1)
++#else
++		if(delta_IQK > 3)
++#endif
++		{
++			pdmpriv->ThermalValue_IQK = ThermalValue;
++			rtl8192c_PHY_IQCalibrate(Adapter,_FALSE);
++		}
++
++		//update thermal meter value
++		if(pdmpriv->TxPowerTrackControl)
++			pdmpriv->ThermalValue = ThermalValue;
++
++	}
++
++	//DBG_8192C("<===dm_TXPowerTrackingCallback_ThermalMeter_92C\n");
++	
++	pdmpriv->TXPowercount = 0;
++
++}
++
++
++static	VOID
++dm_InitializeTXPowerTracking_ThermalMeter(
++	IN	PADAPTER		Adapter)
++{	
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++
++	//pMgntInfo->bTXPowerTracking = _TRUE;
++	pdmpriv->TXPowercount = 0;
++	pdmpriv->bTXPowerTrackingInit = _FALSE;
++	pdmpriv->ThermalValue = 0;
++	
++#if	(MP_DRIVER != 1)	//for mp driver, turn off txpwrtracking as default
++	pdmpriv->TxPowerTrackControl = _TRUE;
++#endif
++	
++	MSG_8192C("pdmpriv->TxPowerTrackControl = %d\n", pdmpriv->TxPowerTrackControl);
++}
++
++
++static VOID
++DM_InitializeTXPowerTracking(
++	IN	PADAPTER		Adapter)
++{
++	dm_InitializeTXPowerTracking_ThermalMeter(Adapter);	
++}	
++
++//
++//	Description:
++//		- Dispatch TxPower Tracking direct call ONLY for 92s.
++//		- We shall NOT schedule Workitem within PASSIVE LEVEL, which will cause system resource
++//		   leakage under some platform.
++//
++//	Assumption:
++//		PASSIVE_LEVEL when this routine is called.
++//
++//	Added by Roger, 2009.06.18.
++//
++static VOID
++DM_TXPowerTracking92CDirectCall(
++            IN	PADAPTER		Adapter)
++{	
++	dm_TXPowerTrackingCallback_ThermalMeter_92C(Adapter);
++}
++
++static VOID
++dm_CheckTXPowerTracking_ThermalMeter(
++	IN	PADAPTER		Adapter)
++{	
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	//u1Byte					TxPowerCheckCnt = 5;	//10 sec
++
++	//if(!pMgntInfo->bTXPowerTracking /*|| (!pdmpriv->TxPowerTrackControl && pdmpriv->bAPKdone)*/)
++	if(!(pdmpriv->DMFlag & DYNAMIC_FUNC_SS))
++	{
++		return;
++	}
++
++	if(!pdmpriv->TM_Trigger)		//at least delay 1 sec
++	{
++		//pHalData->TxPowerCheckCnt++;	//cosa add for debug
++		PHY_SetRFReg(Adapter, RF_PATH_A, RF_T_METER, bRFRegOffsetMask, 0x60);
++		//DBG_8192C("Trigger 92C Thermal Meter!!\n");
++		
++		pdmpriv->TM_Trigger = 1;
++		return;
++		
++	}
++	else
++	{
++		//DBG_8192C("Schedule TxPowerTracking direct call!!\n");
++		DM_TXPowerTracking92CDirectCall(Adapter); //Using direct call is instead, added by Roger, 2009.06.18.
++		pdmpriv->TM_Trigger = 0;
++	}
++
++}
++
++
++VOID
++rtl8192c_dm_CheckTXPowerTracking(
++	IN	PADAPTER		Adapter)
++{
++	dm_CheckTXPowerTracking_ThermalMeter(Adapter);
++}
++
++#ifdef CONFIG_BT_COEXIST
++static BOOLEAN BT_BTStateChange(PADAPTER Adapter)
++{
++	PHAL_DATA_TYPE		pHalData = GET_HAL_DATA(Adapter);
++	struct btcoexist_priv	*pbtpriv = &(pHalData->bt_coexist);
++	struct registry_priv	*registry_par = &Adapter->registrypriv;
++	
++	struct mlme_priv *pmlmepriv = &(Adapter->mlmepriv);
++	
++	u32 		Polling, Ratio_Tx, Ratio_PRI;
++	u32 			BT_Tx, BT_PRI;
++	u8			BT_State;
++	static u8		ServiceTypeCnt = 0;
++	u8			CurServiceType;
++	static u8		LastServiceType = BT_Idle;
++
++	if(check_fwstate(pmlmepriv, _FW_LINKED) == _FALSE)	
++		return _FALSE;
++	
++	BT_State = rtw_read8(Adapter, 0x4fd);
++/*
++	temp = PlatformEFIORead4Byte(Adapter, 0x488);
++	BT_Tx = (u2Byte)(((temp<<8)&0xff00)+((temp>>8)&0xff));
++	BT_PRI = (u2Byte)(((temp>>8)&0xff00)+((temp>>24)&0xff));
++
++	temp = PlatformEFIORead4Byte(Adapter, 0x48c);
++	Polling = ((temp<<8)&0xff000000) + ((temp>>8)&0x00ff0000) + 
++			((temp<<8)&0x0000ff00) + ((temp>>8)&0x000000ff);
++	
++*/
++	BT_Tx = rtw_read32(Adapter, 0x488);
++	
++	DBG_8192C("Ratio 0x488  =%x\n", BT_Tx);
++	BT_Tx =BT_Tx & 0x00ffffff;
++	//RTPRINT(FBT, BT_TRACE, ("Ratio BT_Tx  =%x\n", BT_Tx));
++
++	BT_PRI = rtw_read32(Adapter, 0x48c);
++	
++	DBG_8192C("Ratio 0x48c  =%x\n", BT_PRI);
++	BT_PRI =BT_PRI & 0x00ffffff;
++	//RTPRINT(FBT, BT_TRACE, ("Ratio BT_PRI  =%x\n", BT_PRI));
++
++
++	Polling = rtw_read32(Adapter, 0x490);
++	//RTPRINT(FBT, BT_TRACE, ("Ratio 0x490  =%x\n", Polling));
++
++
++	if(BT_Tx==0xffffffff && BT_PRI==0xffffffff && Polling==0xffffffff && BT_State==0xff)
++		return _FALSE;
++
++	BT_State &= BIT0;
++
++	if(BT_State != pbtpriv->BT_CUR_State)
++	{
++		pbtpriv->BT_CUR_State = BT_State;
++	
++		if(registry_par->bt_sco == 3)
++		{
++			ServiceTypeCnt = 0;
++		
++			pbtpriv->BT_Service = BT_Idle;
++
++			DBG_8192C("BT_%s\n", BT_State?"ON":"OFF");
++
++			BT_State = BT_State | 
++					((pbtpriv->BT_Ant_isolation==1)?0:BIT1) |BIT2;
++
++			rtw_write8(Adapter, 0x4fd, BT_State);
++			DBG_8192C("BT set 0x4fd to %x\n", BT_State);
++		}
++		
++		return _TRUE;
++	}
++	DBG_8192C("bRegBT_Sco =  %d\n",registry_par->bt_sco);
++
++	Ratio_Tx = BT_Tx*1000/Polling;
++	Ratio_PRI = BT_PRI*1000/Polling;
++
++	pbtpriv->Ratio_Tx=Ratio_Tx;
++	pbtpriv->Ratio_PRI=Ratio_PRI;
++	
++	DBG_8192C("Ratio_Tx=%d\n", Ratio_Tx);
++	DBG_8192C("Ratio_PRI=%d\n", Ratio_PRI);
++
++	
++	if(BT_State && registry_par->bt_sco==3)
++	{
++		DBG_8192C("bt_sco  ==3 Follow Counter\n");
++//		if(BT_Tx==0xffff && BT_PRI==0xffff && Polling==0xffffffff)
++//		{
++//			ServiceTypeCnt = 0;
++//			return FALSE;
++//		}
++//		else
++		{
++		/*
++			Ratio_Tx = BT_Tx*1000/Polling;
++			Ratio_PRI = BT_PRI*1000/Polling;
++
++			pHalData->bt_coexist.Ratio_Tx=Ratio_Tx;
++			pHalData->bt_coexist.Ratio_PRI=Ratio_PRI;
++			
++			RTPRINT(FBT, BT_TRACE, ("Ratio_Tx=%d\n", Ratio_Tx));
++			RTPRINT(FBT, BT_TRACE, ("Ratio_PRI=%d\n", Ratio_PRI));
++
++		*/	
++			if((Ratio_Tx < 30)  && (Ratio_PRI < 30)) 
++			  	CurServiceType = BT_Idle;
++			else if((Ratio_PRI > 110) && (Ratio_PRI < 250))
++				CurServiceType = BT_SCO;
++			else if((Ratio_Tx >= 200)&&(Ratio_PRI >= 200))
++				CurServiceType = BT_Busy;
++			else if((Ratio_Tx >=350) && (Ratio_Tx < 500))
++				CurServiceType = BT_OtherBusy;
++			else if(Ratio_Tx >=500)
++				CurServiceType = BT_PAN;
++			else
++				CurServiceType=BT_OtherAction;
++		}
++
++/*		if(pHalData->bt_coexist.bStopCount)
++		{
++			ServiceTypeCnt=0;
++			pHalData->bt_coexist.bStopCount=FALSE;
++		}
++*/
++//		if(CurServiceType == BT_OtherBusy)
++		{
++			ServiceTypeCnt=2;
++			LastServiceType=CurServiceType;
++		}
++#if 0
++		else if(CurServiceType == LastServiceType)
++		{
++			if(ServiceTypeCnt<3)
++				ServiceTypeCnt++;
++		}
++		else
++		{
++			ServiceTypeCnt = 0;
++			LastServiceType = CurServiceType;
++		}
++#endif
++
++		if(ServiceTypeCnt==2)
++		{
++			pbtpriv->BT_Service = LastServiceType;
++			BT_State = BT_State | 
++					((pbtpriv->BT_Ant_isolation==1)?0:BIT1) |
++					//((pbtpriv->BT_Service==BT_SCO)?0:BIT2);
++					((pbtpriv->BT_Service!=BT_Idle)?0:BIT2);
++
++			//if(pbtpriv->BT_Service==BT_Busy)
++			//	BT_State&= ~(BIT2);
++
++			if(pbtpriv->BT_Service==BT_SCO)
++			{
++				DBG_8192C("BT TYPE Set to  ==> BT_SCO\n");
++			}
++			else if(pbtpriv->BT_Service==BT_Idle)
++			{
++				DBG_8192C("BT TYPE Set to  ==> BT_Idle\n");
++			}
++			else if(pbtpriv->BT_Service==BT_OtherAction)
++			{
++				DBG_8192C("BT TYPE Set to  ==> BT_OtherAction\n");
++			}
++			else if(pbtpriv->BT_Service==BT_Busy)
++			{
++				DBG_8192C("BT TYPE Set to  ==> BT_Busy\n");
++			}
++			else if(pbtpriv->BT_Service==BT_PAN)
++			{
++				DBG_8192C("BT TYPE Set to  ==> BT_PAN\n");
++			}
++			else
++			{
++				DBG_8192C("BT TYPE Set to ==> BT_OtherBusy\n");
++			}
++				
++			//Add interrupt migration when bt is not in idel state (no traffic).
++			//suggestion by Victor.
++			if(pbtpriv->BT_Service!=BT_Idle)//EDCA_VI_PARAM modify
++			{
++			
++				rtw_write16(Adapter, 0x504, 0x0ccc);
++				rtw_write8(Adapter, 0x506, 0x54);
++				rtw_write8(Adapter, 0x507, 0x54);
++			
++			}
++			else
++			{
++				rtw_write8(Adapter, 0x506, 0x00);
++				rtw_write8(Adapter, 0x507, 0x00);			
++			}
++				
++			rtw_write8(Adapter, 0x4fd, BT_State);
++			DBG_8192C("BT_SCO set 0x4fd to %x\n", BT_State);
++			return _TRUE;
++		}
++	}
++
++	return _FALSE;
++
++}
++
++static BOOLEAN
++BT_WifiConnectChange(
++	IN	PADAPTER	Adapter
++	)
++{
++	struct mlme_priv *pmlmepriv = &(Adapter->mlmepriv);
++//	PMGNT_INFO		pMgntInfo = &Adapter->MgntInfo;
++	static BOOLEAN	bMediaConnect = _FALSE;
++
++	//if(!pMgntInfo->bMediaConnect || MgntRoamingInProgress(pMgntInfo))
++	if(check_fwstate(pmlmepriv, _FW_LINKED) == _FALSE)	
++	{
++		bMediaConnect = _FALSE;
++	}
++	else
++	{
++		if(!bMediaConnect)
++		{
++			bMediaConnect = _TRUE;
++			return _TRUE;
++		}
++		bMediaConnect = _TRUE;
++	}
++
++	return _FALSE;
++}
++
++#define BT_RSSI_STATE_NORMAL_POWER	BIT0
++#define BT_RSSI_STATE_AMDPU_OFF		BIT1
++#define BT_RSSI_STATE_SPECIAL_LOW	BIT2
++#define BT_RSSI_STATE_BG_EDCA_LOW	BIT3
++
++static s32 GET_UNDECORATED_AVERAGE_RSSI(PADAPTER	Adapter)	
++{
++	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(Adapter);
++	struct mlme_priv	*pmlmepriv = &(Adapter->mlmepriv);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	s32 	average_rssi;
++	
++	if(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE|WIFI_AP_STATE))
++	{	
++		average_rssi = 	pdmpriv->EntryMinUndecoratedSmoothedPWDB;	
++	}
++	else
++	{
++		average_rssi = 	pdmpriv->UndecoratedSmoothedPWDB;
++	}
++	return average_rssi;
++}
++
++static u8 BT_RssiStateChange(
++	IN	PADAPTER	Adapter
++	)
++{
++	PHAL_DATA_TYPE		pHalData = GET_HAL_DATA(Adapter);
++	struct mlme_priv		*pmlmepriv = &(Adapter->mlmepriv);
++	struct btcoexist_priv	*pbtpriv = &(pHalData->bt_coexist);
++	struct dm_priv		*pdmpriv = &pHalData->dmpriv;
++	//PMGNT_INFO		pMgntInfo = &Adapter->MgntInfo;
++	s32			UndecoratedSmoothedPWDB;
++	u8			CurrBtRssiState = 0x00;
++
++
++
++
++	//if(pMgntInfo->bMediaConnect)	// Default port
++	if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)	
++	{
++		UndecoratedSmoothedPWDB = GET_UNDECORATED_AVERAGE_RSSI(Adapter);
++	}
++	else // associated entry pwdb
++	{
++		if(pdmpriv->EntryMinUndecoratedSmoothedPWDB == 0)
++			UndecoratedSmoothedPWDB = 100;	// No any RSSI information. Assume to be MAX.
++		else
++			UndecoratedSmoothedPWDB = pdmpriv->EntryMinUndecoratedSmoothedPWDB;
++	}
++
++	// Check RSSI to determine HighPower/NormalPower state for BT coexistence.
++	if(UndecoratedSmoothedPWDB >= 67)
++		CurrBtRssiState &= (~BT_RSSI_STATE_NORMAL_POWER);
++	else if(UndecoratedSmoothedPWDB < 62)
++		CurrBtRssiState |= BT_RSSI_STATE_NORMAL_POWER;
++
++	// Check RSSI to determine AMPDU setting for BT coexistence.
++	if(UndecoratedSmoothedPWDB >= 40)
++		CurrBtRssiState &= (~BT_RSSI_STATE_AMDPU_OFF);
++	else if(UndecoratedSmoothedPWDB <= 32)
++		CurrBtRssiState |= BT_RSSI_STATE_AMDPU_OFF;
++
++	// Marked RSSI state. It will be used to determine BT coexistence setting later.
++	if(UndecoratedSmoothedPWDB < 35)
++		CurrBtRssiState |=  BT_RSSI_STATE_SPECIAL_LOW;
++	else
++		CurrBtRssiState &= (~BT_RSSI_STATE_SPECIAL_LOW);
++
++	// Check BT state related to BT_Idle in B/G mode.
++	if(UndecoratedSmoothedPWDB < 15)
++		CurrBtRssiState |=  BT_RSSI_STATE_BG_EDCA_LOW;
++	else
++		CurrBtRssiState &= (~BT_RSSI_STATE_BG_EDCA_LOW);
++	
++	if(CurrBtRssiState != pbtpriv->BtRssiState)
++	{
++		pbtpriv->BtRssiState = CurrBtRssiState;
++		return _TRUE;
++	}
++	else
++	{
++		return _FALSE;
++	}
++}
++
++static void dm_BTCoexist(PADAPTER Adapter )
++{
++	HAL_DATA_TYPE			*pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv			*pdmpriv = &pHalData->dmpriv;
++	struct mlme_priv	 		*pmlmepriv = &(Adapter->mlmepriv);
++	struct mlme_ext_info		*pmlmeinfo = &Adapter->mlmeextpriv.mlmext_info;
++	struct mlme_ext_priv		*pmlmeext = &Adapter->mlmeextpriv;
++
++	struct btcoexist_priv		*pbtpriv = &(pHalData->bt_coexist);
++	//PMGNT_INFO				pMgntInfo = &Adapter->MgntInfo;
++	//PRT_HIGH_THROUGHPUT		pHTInfo = GET_HT_INFO(pMgntInfo);
++	
++	//PRX_TS_RECORD	pRxTs = NULL;
++	u8			BT_gpio_mux;
++
++	BOOLEAN		bWifiConnectChange, bBtStateChange,bRssiStateChange;
++
++	if(pbtpriv->bCOBT == _FALSE)		return;
++
++	if(!( pdmpriv->DMFlag & DYNAMIC_FUNC_BT)) return;
++	
++	if( (pbtpriv->BT_Coexist) &&(pbtpriv->BT_CoexistType == BT_CSR_BC4) && (check_fwstate(pmlmepriv, WIFI_AP_STATE) == _FALSE)	)
++	{
++		bWifiConnectChange = BT_WifiConnectChange(Adapter);
++		bBtStateChange	= BT_BTStateChange(Adapter);
++		bRssiStateChange 	= BT_RssiStateChange(Adapter);
++		
++		DBG_8192C("bWifiConnectChange %d, bBtStateChange  %d,bRssiStateChange  %d\n",
++			bWifiConnectChange,bBtStateChange,bRssiStateChange);
++
++		// add by hpfan for debug message
++		BT_gpio_mux = rtw_read8(Adapter, REG_GPIO_MUXCFG);
++		DBG_8192C("BTCoexit Reg_0x40 (%2x)\n", BT_gpio_mux);
++
++		if( bWifiConnectChange ||bBtStateChange  ||bRssiStateChange )
++		{
++			if(pbtpriv->BT_CUR_State)
++			{
++				
++				// Do not allow receiving A-MPDU aggregation.
++				if(pbtpriv->BT_Ampdu)// 0:Disable BT control A-MPDU, 1:Enable BT control A-MPDU.
++				{
++			
++					if(pmlmeinfo->assoc_AP_vendor == ciscoAP)	
++					{
++						if(pbtpriv->BT_Service!=BT_Idle)
++						{
++							if(pmlmeinfo->bAcceptAddbaReq)
++							{
++								DBG_8192C("BT_Disallow AMPDU \n");	
++								pmlmeinfo->bAcceptAddbaReq = _FALSE;
++								send_delba(Adapter,0, get_my_bssid(&(pmlmeinfo->network)));
++							}
++						}
++						else
++						{
++							if(!pmlmeinfo->bAcceptAddbaReq)
++							{
++								DBG_8192C("BT_Allow AMPDU  RSSI >=40\n");	
++								pmlmeinfo->bAcceptAddbaReq = _TRUE;
++							}
++						}
++					}
++					else
++					{
++						if(!pmlmeinfo->bAcceptAddbaReq)
++						{
++							DBG_8192C("BT_Allow AMPDU BT Idle\n");	
++							pmlmeinfo->bAcceptAddbaReq = _TRUE;
++						}
++					}
++				}
++				
++#if 0
++				else if((pHalData->bt_coexist.BT_Service==BT_SCO) || (pHalData->bt_coexist.BT_Service==BT_Busy))
++				{				
++					if(pHalData->bt_coexist.BtRssiState & BT_RSSI_STATE_AMDPU_OFF)
++					{
++						if(pMgntInfo->bBT_Ampdu && pHTInfo->bAcceptAddbaReq)
++						{
++							RTPRINT(FBT, BT_TRACE, ("BT_Disallow AMPDU RSSI <=32\n"));	
++							pHTInfo->bAcceptAddbaReq = FALSE;
++							if(GetTs(Adapter, (PTS_COMMON_INFO*)(&pRxTs), pMgntInfo->Bssid, 0, RX_DIR, FALSE))
++								TsInitDelBA(Adapter, (PTS_COMMON_INFO)pRxTs, RX_DIR);
++						}
++					}
++					else
++					{
++						if(pMgntInfo->bBT_Ampdu && !pHTInfo->bAcceptAddbaReq)
++						{
++							RTPRINT(FBT, BT_TRACE, ("BT_Allow AMPDU  RSSI >=40\n"));	
++							pHTInfo->bAcceptAddbaReq = TRUE;
++						}
++					}
++				}
++				else
++				{
++					if(pMgntInfo->bBT_Ampdu && !pHTInfo->bAcceptAddbaReq)
++					{
++						RTPRINT(FBT, BT_TRACE, ("BT_Allow AMPDU BT not in SCO or BUSY\n"));	
++						pHTInfo->bAcceptAddbaReq = TRUE;
++					}
++				}
++#endif
++
++				if(pbtpriv->BT_Ant_isolation)
++				{			
++					DBG_8192C("BT_IsolationLow\n");
++
++// 20100427 Joseph: Do not adjust Rate adaptive for BT coexist suggested by SD3.
++#if 0
++					RTPRINT(FBT, BT_TRACE, ("BT_Update Rate table\n"));
++					if(pMgntInfo->bUseRAMask)
++					{
++						// 20100407 Joseph: Fix rate adaptive modification for BT coexist.
++						// This fix is not complete yet. It shall also consider VWifi and Adhoc case,
++						// which connect with multiple STAs.
++						Adapter->HalFunc.UpdateHalRAMaskHandler(
++												Adapter,
++												FALSE,
++												0,
++												NULL,
++												NULL,
++												pMgntInfo->RateAdaptive.RATRState,
++												RAMask_Normal);
++					}
++					else
++					{
++						Adapter->HalFunc.UpdateHalRATRTableHandler(
++									Adapter, 
++									&pMgntInfo->dot11OperationalRateSet,
++									pMgntInfo->dot11HTOperationalRateSet,NULL);
++					}
++#endif
++
++					// 20100415 Joseph: Modify BT coexist mechanism suggested by Yaying.
++					// Now we only enable HW BT coexist when BT in "Busy" state.
++					if(1)//pMgntInfo->LinkDetectInfo.NumRecvDataInPeriod >= 20)
++					{
++						if((pmlmeinfo->assoc_AP_vendor == ciscoAP)	&&
++							pbtpriv->BT_Service==BT_OtherAction)
++						{
++							DBG_8192C("BT_Turn ON Coexist\n");
++							rtw_write8(Adapter, REG_GPIO_MUXCFG, 0xa0);	
++						}
++						else
++						{
++							if((pbtpriv->BT_Service==BT_Busy) &&
++								(pbtpriv->BtRssiState & BT_RSSI_STATE_NORMAL_POWER))
++							{
++								DBG_8192C("BT_Turn ON Coexist\n");
++								rtw_write8(Adapter, REG_GPIO_MUXCFG, 0xa0);
++							}
++							else if((pbtpriv->BT_Service==BT_OtherAction) &&
++									(pbtpriv->BtRssiState & BT_RSSI_STATE_SPECIAL_LOW))
++							{
++								DBG_8192C("BT_Turn ON Coexist\n");
++								rtw_write8(Adapter, REG_GPIO_MUXCFG, 0xa0);	
++							}
++							else if(pbtpriv->BT_Service==BT_PAN)
++							{
++								DBG_8192C("BT_Turn ON Coexist\n");
++								rtw_write8(Adapter, REG_GPIO_MUXCFG, 0x00);	
++							}
++							else
++							{
++								DBG_8192C("BT_Turn OFF Coexist\n");
++								rtw_write8(Adapter, REG_GPIO_MUXCFG, 0x00);
++							}
++						}
++					}
++					else
++					{
++						DBG_8192C("BT: There is no Wifi traffic!! Turn off Coexist\n");
++						rtw_write8(Adapter, REG_GPIO_MUXCFG, 0x00);
++					}
++
++					if(1)//pMgntInfo->LinkDetectInfo.NumRecvDataInPeriod >= 20)
++					{
++						if(pbtpriv->BT_Service==BT_PAN)
++						{
++							DBG_8192C("BT_Turn ON Coexist(Reg0x44 = 0x10100)\n");
++							rtw_write32(Adapter, REG_GPIO_PIN_CTRL, 0x10100);	
++						}
++						else
++						{
++							DBG_8192C("BT_Turn OFF Coexist(Reg0x44 = 0x0)\n");
++							rtw_write32(Adapter, REG_GPIO_PIN_CTRL, 0x0);	
++						}
++					}
++					else
++					{
++						DBG_8192C("BT: There is no Wifi traffic!! Turn off Coexist(Reg0x44 = 0x0)\n");
++						rtw_write32(Adapter, REG_GPIO_PIN_CTRL, 0x0);	
++					}
++
++					// 20100430 Joseph: Integrate the BT coexistence EDCA tuning here.
++					if(pbtpriv->BtRssiState & BT_RSSI_STATE_NORMAL_POWER)
++					{
++						if(pbtpriv->BT_Service==BT_OtherBusy)
++						{
++							//pbtpriv->BtEdcaUL = 0x5ea72b;
++							//pbtpriv->BtEdcaDL = 0x5ea72b;
++							pbtpriv->BT_EDCA[UP_LINK] = 0x5ea72b;
++							pbtpriv->BT_EDCA[DOWN_LINK] = 0x5ea72b;							
++							
++							DBG_8192C("BT in BT_OtherBusy state Tx (%d) >350 parameter(0x%x) = 0x%x\n", pbtpriv->Ratio_Tx ,REG_EDCA_BE_PARAM, 0x5ea72b);
++						}
++						else if(pbtpriv->BT_Service==BT_Busy)
++						{
++							//pbtpriv->BtEdcaUL = 0x5eb82f;
++							//pbtpriv->BtEdcaDL = 0x5eb82f;
++
++							pbtpriv->BT_EDCA[UP_LINK] = 0x5eb82f;
++							pbtpriv->BT_EDCA[DOWN_LINK] = 0x5eb82f;							
++							
++							DBG_8192C("BT in BT_Busy state parameter(0x%x) = 0x%x\n", REG_EDCA_BE_PARAM, 0x5eb82f);		
++						}
++						else if(pbtpriv->BT_Service==BT_SCO)
++						{
++							if(pbtpriv->Ratio_Tx>160)
++							{
++								//pbtpriv->BtEdcaUL = 0x5ea72f;
++								//pbtpriv->BtEdcaDL = 0x5ea72f;
++								pbtpriv->BT_EDCA[UP_LINK] = 0x5ea72f;
++								pbtpriv->BT_EDCA[DOWN_LINK] = 0x5ea72f;							
++								DBG_8192C("BT in BT_SCO state Tx (%d) >160 parameter(0x%x) = 0x%x\n",pbtpriv->Ratio_Tx, REG_EDCA_BE_PARAM, 0x5ea72f);
++							}
++							else
++							{
++								//pbtpriv->BtEdcaUL = 0x5ea32b;
++								//pbtpriv->BtEdcaDL = 0x5ea42b;
++
++								pbtpriv->BT_EDCA[UP_LINK] = 0x5ea32b;
++								pbtpriv->BT_EDCA[DOWN_LINK] = 0x5ea42b;						
++								
++								DBG_8192C("BT in BT_SCO state Tx (%d) <160 parameter(0x%x) = 0x%x\n", pbtpriv->Ratio_Tx,REG_EDCA_BE_PARAM, 0x5ea32f);
++							}									
++						}
++						else
++						{
++							// BT coexistence mechanism does not control EDCA parameter.
++							//pbtpriv->BtEdcaUL = 0;
++							//pbtpriv->BtEdcaDL = 0;
++
++							pbtpriv->BT_EDCA[UP_LINK] = 0;
++							pbtpriv->BT_EDCA[DOWN_LINK] = 0;							
++							DBG_8192C("BT in  State  %d  and parameter(0x%x) use original setting.\n",pbtpriv->BT_Service, REG_EDCA_BE_PARAM);
++						}
++
++						if((pbtpriv->BT_Service!=BT_Idle) &&
++							(pmlmeext->cur_wireless_mode  == WIRELESS_MODE_G) &&
++							(pbtpriv->BtRssiState & BT_RSSI_STATE_BG_EDCA_LOW))
++						{
++							//pbtpriv->BtEdcaUL = 0x5eb82b;
++							//pbtpriv->BtEdcaDL = 0x5eb82b;
++
++							pbtpriv->BT_EDCA[UP_LINK] = 0x5eb82b;
++							pbtpriv->BT_EDCA[DOWN_LINK] = 0x5eb82b;							
++							
++							DBG_8192C("BT set parameter(0x%x) = 0x%x\n", REG_EDCA_BE_PARAM, 0x5eb82b);		
++						}
++					}
++					else
++					{
++						// BT coexistence mechanism does not control EDCA parameter.
++						//pbtpriv->BtEdcaUL = 0;
++						//pbtpriv->BtEdcaDL = 0;
++
++						pbtpriv->BT_EDCA[UP_LINK] = 0;
++						pbtpriv->BT_EDCA[DOWN_LINK] = 0;					
++					}
++
++					// 20100415 Joseph: Set RF register 0x1E and 0x1F for BT coexist suggested by Yaying.
++					if(pbtpriv->BT_Service!=BT_Idle)
++					{
++						DBG_8192C("BT Set RfReg0x1E[7:4] = 0x%x \n", 0xf);
++						PHY_SetRFReg(Adapter, PathA, 0x1e, 0xf0, 0xf);
++						//RTPRINT(FBT, BT_TRACE, ("BT Set RfReg0x1E[7:4] = 0x%x \n", 0xf));
++						//PHY_SetRFReg(Adapter, PathA, 0x1f, 0xf0, 0xf);
++					}
++					else
++					{
++						DBG_8192C("BT Set RfReg0x1E[7:4] = 0x%x \n",pbtpriv->BtRfRegOrigin1E);
++						PHY_SetRFReg(Adapter, PathA, 0x1e, 0xf0, pbtpriv->BtRfRegOrigin1E);
++						//RTPRINT(FBT, BT_TRACE, ("BT Set RfReg0x1F[7:4] = 0x%x \n", pHalData->bt_coexist.BtRfRegOrigin1F));
++						//PHY_SetRFReg(Adapter, PathA, 0x1f, 0xf0, pHalData->bt_coexist.BtRfRegOrigin1F);
++					}	
++				}
++				else
++				{
++					DBG_8192C("BT_IsolationHigh\n");
++					// Do nothing.
++				}			
++			}
++			else
++			{
++			
++				if(pbtpriv->BT_Ampdu && !pmlmeinfo->bAcceptAddbaReq)
++				{
++					DBG_8192C("BT_Allow AMPDU bt is off\n");	
++					pmlmeinfo->bAcceptAddbaReq = _TRUE;
++				}
++			
++				DBG_8192C("BT_Turn OFF Coexist bt is off \n");
++				rtw_write8(Adapter, REG_GPIO_MUXCFG, 0x00);
++
++				DBG_8192C("BT Set RfReg0x1E[7:4] = 0x%x \n", pbtpriv->BtRfRegOrigin1E);
++				PHY_SetRFReg(Adapter, PathA, 0x1e, 0xf0, pbtpriv->BtRfRegOrigin1E);
++				//RTPRINT(FBT, BT_TRACE, ("BT Set RfReg0x1F[7:4] = 0x%x \n", pHalData->bt_coexist.BtRfRegOrigin1F));
++				//PHY_SetRFReg(Adapter, PathA, 0x1f, 0xf0, pHalData->bt_coexist.BtRfRegOrigin1F);
++
++				// BT coexistence mechanism does not control EDCA parameter since BT is disabled.
++				//pbtpriv->BtEdcaUL = 0;
++				//pbtpriv->BtEdcaDL = 0;
++				pbtpriv->BT_EDCA[UP_LINK] = 0;
++				pbtpriv->BT_EDCA[DOWN_LINK] = 0;				
++				
++
++// 20100427 Joseph: Do not adjust Rate adaptive for BT coexist suggested by SD3.
++#if 0
++				RTPRINT(FBT, BT_TRACE, ("BT_Update Rate table\n"));
++				if(pMgntInfo->bUseRAMask)
++				{
++					// 20100407 Joseph: Fix rate adaptive modification for BT coexist.
++					// This fix is not complete yet. It shall also consider VWifi and Adhoc case,
++					// which connect with multiple STAs.
++					Adapter->HalFunc.UpdateHalRAMaskHandler(
++											Adapter,
++											FALSE,
++											0,
++											NULL,
++											NULL,
++											pMgntInfo->RateAdaptive.RATRState,
++											RAMask_Normal);
++				}
++				else
++				{
++					Adapter->HalFunc.UpdateHalRATRTableHandler(
++								Adapter, 
++								&pMgntInfo->dot11OperationalRateSet,
++								pMgntInfo->dot11HTOperationalRateSet,NULL);
++				}
++#endif
++			}
++		}
++	}
++}
++
++static void dm_InitBtCoexistDM(	PADAPTER	Adapter)
++{
++	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(Adapter);
++	struct btcoexist_priv	*pbtpriv = &(pHalData->bt_coexist);
++
++	if( !pbtpriv->BT_Coexist ) return;
++	
++	pbtpriv->BtRfRegOrigin1E = (u8)PHY_QueryRFReg(Adapter, PathA, 0x1e, 0xf0);
++	pbtpriv->BtRfRegOrigin1F = (u8)PHY_QueryRFReg(Adapter, PathA, 0x1f, 0xf0);
++}
++
++void rtl8192c_set_dm_bt_coexist(_adapter *padapter, u8 bStart)
++{
++	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(padapter);
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct btcoexist_priv	*pbtpriv = &(pHalData->bt_coexist);
++	
++	pbtpriv->bCOBT = bStart;
++	send_delba(padapter,0, get_my_bssid(&(pmlmeinfo->network)));
++	send_delba(padapter,1, get_my_bssid(&(pmlmeinfo->network)));
++	
++}
++
++void rtl8192c_issue_delete_ba(_adapter *padapter, u8 dir)
++{
++	struct mlme_ext_info		*pmlmeinfo = &padapter->mlmeextpriv.mlmext_info;
++	DBG_8192C("issue_delete_ba : %s...\n",(dir==0)?"RX_DIR":"TX_DIR");
++	send_delba(padapter,dir, get_my_bssid(&(pmlmeinfo->network)));
++}
++
++#endif
++
++#if 0//def CONFIG_PCI_HCI
++
++BOOLEAN
++BT_BTStateChange(
++	IN	PADAPTER	Adapter
++	)
++{
++	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(Adapter);
++	PMGNT_INFO		pMgntInfo = &Adapter->MgntInfo;
++	
++	u4Byte 			temp, Polling, Ratio_Tx, Ratio_PRI;
++	u4Byte 			BT_Tx, BT_PRI;
++	u1Byte			BT_State;
++	static u1Byte		ServiceTypeCnt = 0;
++	u1Byte			CurServiceType;
++	static u1Byte		LastServiceType = BT_Idle;
++
++	if(!pMgntInfo->bMediaConnect)
++		return FALSE;
++	
++	BT_State = PlatformEFIORead1Byte(Adapter, 0x4fd);
++/*
++	temp = PlatformEFIORead4Byte(Adapter, 0x488);
++	BT_Tx = (u2Byte)(((temp<<8)&0xff00)+((temp>>8)&0xff));
++	BT_PRI = (u2Byte)(((temp>>8)&0xff00)+((temp>>24)&0xff));
++
++	temp = PlatformEFIORead4Byte(Adapter, 0x48c);
++	Polling = ((temp<<8)&0xff000000) + ((temp>>8)&0x00ff0000) + 
++			((temp<<8)&0x0000ff00) + ((temp>>8)&0x000000ff);
++	
++*/
++	BT_Tx = PlatformEFIORead4Byte(Adapter, 0x488);
++	
++	RTPRINT(FBT, BT_TRACE, ("Ratio 0x488  =%x\n", BT_Tx));
++	BT_Tx =BT_Tx & 0x00ffffff;
++	//RTPRINT(FBT, BT_TRACE, ("Ratio BT_Tx  =%x\n", BT_Tx));
++
++	BT_PRI = PlatformEFIORead4Byte(Adapter, 0x48c);
++	
++	RTPRINT(FBT, BT_TRACE, ("Ratio Ratio 0x48c  =%x\n", BT_PRI));
++	BT_PRI =BT_PRI & 0x00ffffff;
++	//RTPRINT(FBT, BT_TRACE, ("Ratio BT_PRI  =%x\n", BT_PRI));
++
++
++	Polling = PlatformEFIORead4Byte(Adapter, 0x490);
++	//RTPRINT(FBT, BT_TRACE, ("Ratio 0x490  =%x\n", Polling));
++
++
++	if(BT_Tx==0xffffffff && BT_PRI==0xffffffff && Polling==0xffffffffff && BT_State==0xff)
++		return FALSE;
++
++	BT_State &= BIT0;
++
++	if(BT_State != pHalData->bt_coexist.BT_CUR_State)
++	{
++		pHalData->bt_coexist.BT_CUR_State = BT_State;
++	
++		if(pMgntInfo->bRegBT_Sco == 3)
++		{
++			ServiceTypeCnt = 0;
++		
++			pHalData->bt_coexist.BT_Service = BT_Idle;
++
++			RTPRINT(FBT, BT_TRACE, ("BT_%s\n", BT_State?"ON":"OFF"));
++
++			BT_State = BT_State | 
++					((pHalData->bt_coexist.BT_Ant_isolation==1)?0:BIT1) |BIT2;
++
++			PlatformEFIOWrite1Byte(Adapter, 0x4fd, BT_State);
++			RTPRINT(FBT, BT_TRACE, ("BT set 0x4fd to %x\n", BT_State));
++		}
++		
++		return TRUE;
++	}
++	RTPRINT(FBT, BT_TRACE, ("bRegBT_Sco   %d\n", pMgntInfo->bRegBT_Sco));
++
++	Ratio_Tx = BT_Tx*1000/Polling;
++	Ratio_PRI = BT_PRI*1000/Polling;
++
++	pHalData->bt_coexist.Ratio_Tx=Ratio_Tx;
++	pHalData->bt_coexist.Ratio_PRI=Ratio_PRI;
++	
++	RTPRINT(FBT, BT_TRACE, ("Ratio_Tx=%d\n", Ratio_Tx));
++	RTPRINT(FBT, BT_TRACE, ("Ratio_PRI=%d\n", Ratio_PRI));
++
++	
++	if(BT_State && pMgntInfo->bRegBT_Sco==3)
++	{
++		RTPRINT(FBT, BT_TRACE, ("bRegBT_Sco  ==3 Follow Counter\n"));
++//		if(BT_Tx==0xffff && BT_PRI==0xffff && Polling==0xffffffff)
++//		{
++//			ServiceTypeCnt = 0;
++//			return FALSE;
++//		}
++//		else
++		{
++		/*
++			Ratio_Tx = BT_Tx*1000/Polling;
++			Ratio_PRI = BT_PRI*1000/Polling;
++
++			pHalData->bt_coexist.Ratio_Tx=Ratio_Tx;
++			pHalData->bt_coexist.Ratio_PRI=Ratio_PRI;
++			
++			RTPRINT(FBT, BT_TRACE, ("Ratio_Tx=%d\n", Ratio_Tx));
++			RTPRINT(FBT, BT_TRACE, ("Ratio_PRI=%d\n", Ratio_PRI));
++
++		*/	
++			if((Ratio_Tx <= 50)  && (Ratio_PRI <= 50)) 
++			  	CurServiceType = BT_Idle;
++			else if((Ratio_PRI > 150) && (Ratio_PRI < 200))
++				CurServiceType = BT_SCO;
++			else if((Ratio_Tx >= 200)&&(Ratio_PRI >= 200))
++				CurServiceType = BT_Busy;
++			else if(Ratio_Tx >= 350)
++				CurServiceType = BT_OtherBusy;
++			else
++				CurServiceType=BT_OtherAction;
++
++		}
++/*		if(pHalData->bt_coexist.bStopCount)
++		{
++			ServiceTypeCnt=0;
++			pHalData->bt_coexist.bStopCount=FALSE;
++		}
++*/
++		if(CurServiceType == BT_OtherBusy)
++		{
++			ServiceTypeCnt=2;
++			LastServiceType=CurServiceType;
++		}
++		else if(CurServiceType == LastServiceType)
++		{
++			if(ServiceTypeCnt<3)
++				ServiceTypeCnt++;
++		}
++		else
++		{
++			ServiceTypeCnt = 0;
++			LastServiceType = CurServiceType;
++		}
++
++		if(ServiceTypeCnt==2)
++		{
++			pHalData->bt_coexist.BT_Service = LastServiceType;
++			BT_State = BT_State | 
++					((pHalData->bt_coexist.BT_Ant_isolation==1)?0:BIT1) |
++					((pHalData->bt_coexist.BT_Service==BT_SCO)?0:BIT2);
++
++			if(pHalData->bt_coexist.BT_Service==BT_Busy)
++				BT_State&= ~(BIT2);
++
++			if(pHalData->bt_coexist.BT_Service==BT_SCO)
++			{
++				RTPRINT(FBT, BT_TRACE, ("BT TYPE Set to  ==> BT_SCO\n"));
++			}
++			else if(pHalData->bt_coexist.BT_Service==BT_Idle)
++			{
++				RTPRINT(FBT, BT_TRACE, ("BT TYPE Set to  ==> BT_Idle\n"));
++			}
++			else if(pHalData->bt_coexist.BT_Service==BT_OtherAction)
++			{
++				RTPRINT(FBT, BT_TRACE, ("BT TYPE Set to  ==> BT_OtherAction\n"));
++			}
++			else if(pHalData->bt_coexist.BT_Service==BT_Busy)
++			{
++				RTPRINT(FBT, BT_TRACE, ("BT TYPE Set to  ==> BT_Busy\n"));
++			}
++			else
++			{
++				RTPRINT(FBT, BT_TRACE, ("BT TYPE Set to ==> BT_OtherBusy\n"));
++			}
++				
++			//Add interrupt migration when bt is not in idel state (no traffic).
++			//suggestion by Victor.
++			if(pHalData->bt_coexist.BT_Service!=BT_Idle)
++			{
++			
++				PlatformEFIOWrite2Byte(Adapter, 0x504, 0x0ccc);
++				PlatformEFIOWrite1Byte(Adapter, 0x506, 0x54);
++				PlatformEFIOWrite1Byte(Adapter, 0x507, 0x54);
++			
++			}
++			else
++			{
++				PlatformEFIOWrite1Byte(Adapter, 0x506, 0x00);
++				PlatformEFIOWrite1Byte(Adapter, 0x507, 0x00);			
++			}
++				
++			PlatformEFIOWrite1Byte(Adapter, 0x4fd, BT_State);
++			RTPRINT(FBT, BT_TRACE, ("BT_SCO set 0x4fd to %x\n", BT_State));
++			return TRUE;
++		}
++	}
++
++	return FALSE;
++
++}
++
++BOOLEAN
++BT_WifiConnectChange(
++	IN	PADAPTER	Adapter
++	)
++{
++	PMGNT_INFO		pMgntInfo = &Adapter->MgntInfo;
++	static BOOLEAN	bMediaConnect = FALSE;
++
++	if(!pMgntInfo->bMediaConnect || MgntRoamingInProgress(pMgntInfo))
++	{
++		bMediaConnect = FALSE;
++	}
++	else
++	{
++		if(!bMediaConnect)
++		{
++			bMediaConnect = TRUE;
++			return TRUE;
++		}
++		bMediaConnect = TRUE;
++	}
++
++	return FALSE;
++}
++
++BOOLEAN
++BT_RSSIChangeWithAMPDU(
++	IN	PADAPTER	Adapter
++	)
++{
++	PMGNT_INFO		pMgntInfo = &Adapter->MgntInfo;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++
++	if(!Adapter->pNdisCommon->bRegBT_Ampdu || !Adapter->pNdisCommon->bRegAcceptAddbaReq)
++		return FALSE;
++
++	RTPRINT(FBT, BT_TRACE, ("RSSI is %d\n",pHalData->UndecoratedSmoothedPWDB));
++	
++	if((pHalData->UndecoratedSmoothedPWDB<=32) && pMgntInfo->pHTInfo->bAcceptAddbaReq)
++	{
++		RTPRINT(FBT, BT_TRACE, ("BT_Disallow AMPDU RSSI <=32  Need change\n"));				
++		return TRUE;
++
++	}
++	else if((pHalData->UndecoratedSmoothedPWDB>=40) && !pMgntInfo->pHTInfo->bAcceptAddbaReq )
++	{
++		RTPRINT(FBT, BT_TRACE, ("BT_Allow AMPDU RSSI >=40, Need change\n"));
++		return TRUE;
++	}
++	else 
++		return FALSE;
++
++}
++
++
++VOID
++dm_BTCoexist(
++	IN	PADAPTER	Adapter
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	PMGNT_INFO		pMgntInfo = &Adapter->MgntInfo;
++	static u1Byte		LastTxPowerLvl = 0xff;
++	PRX_TS_RECORD	pRxTs = NULL;
++
++	BOOLEAN			bWifiConnectChange, bBtStateChange,bRSSIChangeWithAMPDU;
++
++	if( (pHalData->bt_coexist.BluetoothCoexist) &&
++		(pHalData->bt_coexist.BT_CoexistType == BT_CSR_BC4) && 
++		(!ACTING_AS_AP(Adapter))	)
++	{
++		bWifiConnectChange = BT_WifiConnectChange(Adapter);
++		bBtStateChange = BT_BTStateChange(Adapter);
++		bRSSIChangeWithAMPDU = BT_RSSIChangeWithAMPDU(Adapter);
++		RTPRINT(FBT, BT_TRACE, ("bWifiConnectChange %d, bBtStateChange  %d,LastTxPowerLvl  %x,  DynamicTxHighPowerLvl  %x\n",
++			bWifiConnectChange,bBtStateChange,LastTxPowerLvl,pHalData->DynamicTxHighPowerLvl));
++		if( bWifiConnectChange ||bBtStateChange  ||
++			(LastTxPowerLvl != pHalData->DynamicTxHighPowerLvl)	||bRSSIChangeWithAMPDU)
++		{
++			LastTxPowerLvl = pHalData->DynamicTxHighPowerLvl;
++
++			if(pHalData->bt_coexist.BT_CUR_State)
++			{
++				// Do not allow receiving A-MPDU aggregation.
++				if((pHalData->bt_coexist.BT_Service==BT_SCO) || (pHalData->bt_coexist.BT_Service==BT_Busy))
++				{
++					if(pHalData->UndecoratedSmoothedPWDB<=32)
++					{
++						if(Adapter->pNdisCommon->bRegBT_Ampdu && Adapter->pNdisCommon->bRegAcceptAddbaReq)
++						{
++							RTPRINT(FBT, BT_TRACE, ("BT_Disallow AMPDU RSSI <=32\n"));	
++							pMgntInfo->pHTInfo->bAcceptAddbaReq = FALSE;
++							if(GetTs(Adapter, (PTS_COMMON_INFO*)(&pRxTs), pMgntInfo->Bssid, 0, RX_DIR, FALSE))
++								TsInitDelBA(Adapter, (PTS_COMMON_INFO)pRxTs, RX_DIR);
++						}
++					}
++					else if(pHalData->UndecoratedSmoothedPWDB>=40)
++					{
++						if(Adapter->pNdisCommon->bRegBT_Ampdu && Adapter->pNdisCommon->bRegAcceptAddbaReq)
++						{
++							RTPRINT(FBT, BT_TRACE, ("BT_Allow AMPDU  RSSI >=40\n"));	
++							pMgntInfo->pHTInfo->bAcceptAddbaReq = TRUE;
++						}
++					}
++				}
++				else
++				{
++					if(Adapter->pNdisCommon->bRegBT_Ampdu && Adapter->pNdisCommon->bRegAcceptAddbaReq)
++					{
++						RTPRINT(FBT, BT_TRACE, ("BT_Allow AMPDU BT not in SCO or BUSY\n"));	
++						pMgntInfo->pHTInfo->bAcceptAddbaReq = TRUE;
++					}
++				}
++
++				if(pHalData->bt_coexist.BT_Ant_isolation)
++				{			
++					RTPRINT(FBT, BT_TRACE, ("BT_IsolationLow\n"));
++					RTPRINT(FBT, BT_TRACE, ("BT_Update Rate table\n"));
++					Adapter->HalFunc.UpdateHalRATRTableHandler(
++								Adapter, 
++								&pMgntInfo->dot11OperationalRateSet,
++								pMgntInfo->dot11HTOperationalRateSet,NULL);
++					
++					if(pHalData->bt_coexist.BT_Service==BT_SCO)
++					{
++
++						RTPRINT(FBT, BT_TRACE, ("BT_Turn OFF Coexist with SCO \n"));
++						PlatformEFIOWrite1Byte(Adapter, REG_GPIO_MUXCFG, 0x14);					
++					}
++					else if(pHalData->DynamicTxHighPowerLvl == TxHighPwrLevel_Normal)
++					{
++						RTPRINT(FBT, BT_TRACE, ("BT_Turn ON Coexist\n"));
++						PlatformEFIOWrite1Byte(Adapter, REG_GPIO_MUXCFG, 0xb4);
++					}
++					else
++					{
++						RTPRINT(FBT, BT_TRACE, ("BT_Turn OFF Coexist\n"));
++						PlatformEFIOWrite1Byte(Adapter, REG_GPIO_MUXCFG, 0x14);
++					}
++				}
++				else
++				{
++					RTPRINT(FBT, BT_TRACE, ("BT_IsolationHigh\n"));
++					// Do nothing.
++				}
++			}
++			else
++			{
++				if(Adapter->pNdisCommon->bRegBT_Ampdu && Adapter->pNdisCommon->bRegAcceptAddbaReq)
++				{
++					RTPRINT(FBT, BT_TRACE, ("BT_Allow AMPDU bt is off\n"));	
++					pMgntInfo->pHTInfo->bAcceptAddbaReq = TRUE;
++				}
++
++				RTPRINT(FBT, BT_TRACE, ("BT_Turn OFF Coexist bt is off \n"));
++				PlatformEFIOWrite1Byte(Adapter, REG_GPIO_MUXCFG, 0x14);
++
++				RTPRINT(FBT, BT_TRACE, ("BT_Update Rate table\n"));
++				Adapter->HalFunc.UpdateHalRATRTableHandler(
++							Adapter, 
++							&pMgntInfo->dot11OperationalRateSet,
++							pMgntInfo->dot11HTOperationalRateSet,NULL);
++			}
++		}
++	}
++}
++#endif
++
++
++/*-----------------------------------------------------------------------------
++ * Function:	dm_CheckRfCtrlGPIO()
++ *
++ * Overview:	Copy 8187B template for 9xseries.
++ *
++ * Input:		NONE
++ *
++ * Output:		NONE
++ *
++ * Return:		NONE
++ *
++ * Revised History:
++ *	When		Who		Remark
++ *	01/10/2008	MHC		Create Version 0.  
++ *
++ *---------------------------------------------------------------------------*/
++static VOID
++dm_CheckRfCtrlGPIO(
++	IN	PADAPTER	Adapter
++	)
++{
++#if 0
++	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(Adapter);
++#if defined (CONFIG_USB_HCI) || defined (CONFIG_SDIO_HCI)
++	#ifdef CONFIG_USB_HCI
++		// 2010/08/12 MH Add for CU selective suspend.
++		PRT_USB_DEVICE		pDevice = GET_RT_USB_DEVICE(Adapter);
++	#else
++		PRT_SDIO_DEVICE	pDevice = GET_RT_SDIO_DEVICE(Adapter);
++	#endif
++#endif
++
++	if(!Adapter->MgntInfo.PowerSaveControl.bGpioRfSw)
++		return;
++
++	RTPRINT(FPWR, PWRHW, ("dm_CheckRfCtrlGPIO \n"));
++
++#if defined (CONFIG_USB_HCI) || defined (CONFIG_SDIO_HCI)
++	// Walk around for DTM test, we will not enable HW - radio on/off because r/w
++	// page 1 register before Lextra bus is enabled cause system fails when resuming
++	// from S4. 20080218, Emily
++	if(Adapter->bInHctTest)
++		return;
++
++//#if ((HAL_CODE_BASE == RTL8192_S) )
++	//Adapter->HalFunc.GPIOChangeRFHandler(Adapter, GPIORF_POLLING);
++//#else
++	// 2010/07/27 MH Only Minicard and support selective suspend, we can not turn off all MAC power to 
++	// stop 8051. For dongle and minicard, we both support selective suspend mode.
++	//if(pDevice->RegUsbSS && Adapter->HalFunc.GetInterfaceSelectionHandler(Adapter) == INTF_SEL2_MINICARD)
++
++	//
++	// 2010/08/12 MH We support severl power consumption combination as below.
++	//
++	// Power consumption combination  
++	//	SS Enable: (LPS disable + IPS + SW/HW radio off)
++	//	1. Dongle + PDN  (support HW radio off)
++	//	2. Dongle + Normal  (No HW radio off)
++	//	3. MiniCard + PDN (support HW radio off)
++	//	4. MiniCard + Normal (support HW radio off)
++	//
++	//	SS Disable: (LPS + IPS + SW/HW radio off)
++	//	1. Dongle + PDN  (support HW radio off)
++	//	2. Dongle + Normal  (No HW radio off)
++	//	3. MiniCard + PDN (support HW radio off)
++	//	4. MiniCard + Normal (support HW radio off)
++	//
++	//	For Power down module detection. We need to read power register no matter
++	//	dongle or minicard, we will add the item is the detection method.
++	//
++	//
++	//vivi add du case
++	if ((IS_HARDWARE_TYPE_8192CU(Adapter)||IS_HARDWARE_TYPE_8192DU(Adapter))
++		&& pDevice->RegUsbSS)
++	{
++		RT_TRACE(COMP_RF, DBG_LOUD, ("USB SS Enabled\n"));
++		if (SUPPORT_HW_RADIO_DETECT(Adapter))
++		{	// Support HW radio detection
++			RT_TRACE(COMP_RF, DBG_LOUD, ("USB Card Type 2/3/4 support GPIO Detect\n"));
++			GpioDetectTimerStart(Adapter);
++		}
++		else
++		{	// Dongle does not support HW radio detection.?? In the fufure??
++			RT_TRACE(COMP_RF, DBG_LOUD, ("USB DONGLE Non-GPIO-Detect\n"));				
++		}			
++	}
++	else if (IS_HARDWARE_TYPE_8192CU(Adapter) ||
++		IS_HARDWARE_TYPE_8723AU(Adapter)||
++		IS_HARDWARE_TYPE_8192DU(Adapter) ||
++		IS_HARDWARE_TYPE_8723AS(Adapter))
++	{	// Not support Selective suspend 
++		RT_TRACE(COMP_RF, DBG_LOUD, ("USB SS Disable\n"));
++		if (SUPPORT_HW_RADIO_DETECT(Adapter))
++		{
++			RT_TRACE(COMP_RF, DBG_LOUD, ("USB Card Type 2/3/4 support GPIO Detect\n"));
++			PlatformScheduleWorkItem( &(pHalData->GPIOChangeRFWorkItem) );
++		}
++		else
++		{
++			RT_TRACE(COMP_RF, DBG_LOUD, ("USB DONGLE Non-GPIO-Detect\n"));
++		}
++	}
++	else
++	{	// CE only support noemal HW radio detection now. Support timers GPIO detection in SE/CU.		
++		PlatformScheduleWorkItem( &(pHalData->GPIOChangeRFWorkItem) );
++	}
++//#endif
++#else if defined CONFIG_PCI_HCI
++	if(Adapter->bInHctTest)
++		return;
++
++	// CE only support noemal HW radio detection now. We support timers GPIO detection in SE.		
++	PlatformScheduleWorkItem( &(pHalData->GPIOChangeRFWorkItem) );
++#endif
++#endif
++}	/* dm_CheckRfCtrlGPIO */
++
++static VOID
++dm_InitRateAdaptiveMask(
++	IN	PADAPTER	Adapter	
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	PRATE_ADAPTIVE	pRA = (PRATE_ADAPTIVE)&pdmpriv->RateAdaptive;
++	
++	pRA->RATRState = DM_RATR_STA_INIT;
++	pRA->PreRATRState = DM_RATR_STA_INIT;
++
++	if (pdmpriv->DM_Type == DM_Type_ByDriver)
++		pdmpriv->bUseRAMask = _TRUE;
++	else
++		pdmpriv->bUseRAMask = _FALSE;	
++}
++
++/*-----------------------------------------------------------------------------
++ * Function:	dm_RefreshRateAdaptiveMask()
++ *
++ * Overview:	Update rate table mask according to rssi
++ *
++ * Input:		NONE
++ *
++ * Output:		NONE
++ *
++ * Return:		NONE
++ *
++ * Revised History:
++ *	When		Who		Remark
++ *	05/27/2009	hpfan	Create Version 0.  
++ *
++ *---------------------------------------------------------------------------*/
++static VOID
++dm_RefreshRateAdaptiveMask(	IN	PADAPTER	pAdapter)
++{
++#if 0
++	PADAPTER 				pTargetAdapter;
++	HAL_DATA_TYPE			*pHalData = GET_HAL_DATA(pAdapter);
++	PMGNT_INFO				pMgntInfo = &(ADJUST_TO_ADAPTIVE_ADAPTER(pAdapter, TRUE)->MgntInfo);
++	PRATE_ADAPTIVE			pRA = (PRATE_ADAPTIVE)&pMgntInfo->RateAdaptive;
++	u4Byte					LowRSSIThreshForRA = 0, HighRSSIThreshForRA = 0;
++
++	if(pAdapter->bDriverStopped)
++	{
++		RT_TRACE(COMP_RATR, DBG_TRACE, ("<---- dm_RefreshRateAdaptiveMask(): driver is going to unload\n"));
++		return;
++	}
++
++	if(!pMgntInfo->bUseRAMask)
++	{
++		RT_TRACE(COMP_RATR, DBG_LOUD, ("<---- dm_RefreshRateAdaptiveMask(): driver does not control rate adaptive mask\n"));
++		return;
++	}
++
++	// if default port is connected, update RA table for default port (infrastructure mode only)
++	if(pAdapter->MgntInfo.mAssoc && (!ACTING_AS_AP(pAdapter)))
++	{
++		
++		// decide rastate according to rssi
++		switch (pRA->PreRATRState)
++		{
++			case DM_RATR_STA_HIGH:
++				HighRSSIThreshForRA = 50;
++				LowRSSIThreshForRA = 20;
++				break;
++			
++			case DM_RATR_STA_MIDDLE:
++				HighRSSIThreshForRA = 55;
++				LowRSSIThreshForRA = 20;
++				break;
++			
++			case DM_RATR_STA_LOW:
++				HighRSSIThreshForRA = 50;
++				LowRSSIThreshForRA = 25;
++				break;
++
++			default:
++				HighRSSIThreshForRA = 50;
++				LowRSSIThreshForRA = 20;
++				break;
++		}
++
++		if(pHalData->UndecoratedSmoothedPWDB > (s4Byte)HighRSSIThreshForRA)
++			pRA->RATRState = DM_RATR_STA_HIGH;
++		else if(pHalData->UndecoratedSmoothedPWDB > (s4Byte)LowRSSIThreshForRA)
++			pRA->RATRState = DM_RATR_STA_MIDDLE;
++		else
++			pRA->RATRState = DM_RATR_STA_LOW;
++
++		if(pRA->PreRATRState != pRA->RATRState)
++		{
++			RT_PRINT_ADDR(COMP_RATR, DBG_LOUD, ("Target AP addr : "), pMgntInfo->Bssid);
++			RT_TRACE(COMP_RATR, DBG_LOUD, ("RSSI = %d\n", pHalData->UndecoratedSmoothedPWDB));
++			RT_TRACE(COMP_RATR, DBG_LOUD, ("RSSI_LEVEL = %d\n", pRA->RATRState));
++			RT_TRACE(COMP_RATR, DBG_LOUD, ("PreState = %d, CurState = %d\n", pRA->PreRATRState, pRA->RATRState));
++			pAdapter->HalFunc.UpdateHalRAMaskHandler(
++									pAdapter,
++									FALSE,
++									0,
++									NULL,
++									NULL,
++									pRA->RATRState);
++			pRA->PreRATRState = pRA->RATRState;
++		}
++	}
++
++	//
++	// The following part configure AP/VWifi/IBSS rate adaptive mask.
++	//
++	if(ACTING_AS_AP(pAdapter) || ACTING_AS_IBSS(pAdapter))
++	{
++		pTargetAdapter = pAdapter;
++	}
++	else
++	{
++		pTargetAdapter = ADJUST_TO_ADAPTIVE_ADAPTER(pAdapter, FALSE);
++		if(!ACTING_AS_AP(pTargetAdapter))
++			pTargetAdapter = NULL;
++	}
++
++	// if extension port (softap) is started, updaet RA table for more than one clients associate
++	if(pTargetAdapter != NULL)
++	{
++		int	i;
++		PRT_WLAN_STA	pEntry;
++		PRATE_ADAPTIVE     pEntryRA;
++
++		for(i = 0; i < ASSOCIATE_ENTRY_NUM; i++)
++		{
++			if(	pTargetAdapter->MgntInfo.AsocEntry[i].bUsed && pTargetAdapter->MgntInfo.AsocEntry[i].bAssociated)
++			{
++				pEntry = pTargetAdapter->MgntInfo.AsocEntry+i;
++				pEntryRA = &pEntry->RateAdaptive;
++
++				switch (pEntryRA->PreRATRState)
++				{
++					case DM_RATR_STA_HIGH:
++					{
++						HighRSSIThreshForRA = 50;
++						LowRSSIThreshForRA = 20;
++					}
++					break;
++					
++					case DM_RATR_STA_MIDDLE:
++					{
++						HighRSSIThreshForRA = 55;
++						LowRSSIThreshForRA = 20;
++					}
++					break;
++					
++					case DM_RATR_STA_LOW:
++					{
++						HighRSSIThreshForRA = 50;
++						LowRSSIThreshForRA = 25;
++					}
++					break;
++
++					default:
++					{
++						HighRSSIThreshForRA = 50;
++						LowRSSIThreshForRA = 20;
++					}
++				}
++
++				if(pEntry->rssi_stat.UndecoratedSmoothedPWDB > (s4Byte)HighRSSIThreshForRA)
++					pEntryRA->RATRState = DM_RATR_STA_HIGH;
++				else if(pEntry->rssi_stat.UndecoratedSmoothedPWDB > (s4Byte)LowRSSIThreshForRA)
++					pEntryRA->RATRState = DM_RATR_STA_MIDDLE;
++				else
++					pEntryRA->RATRState = DM_RATR_STA_LOW;
++
++				if(pEntryRA->PreRATRState != pEntryRA->RATRState)
++				{
++					RT_PRINT_ADDR(COMP_RATR, DBG_LOUD, ("AsocEntry addr : "), pEntry->MacAddr);
++					RT_TRACE(COMP_RATR, DBG_LOUD, ("RSSI = %d\n", pEntry->rssi_stat.UndecoratedSmoothedPWDB));
++					RT_TRACE(COMP_RATR, DBG_LOUD, ("RSSI_LEVEL = %d\n", pEntryRA->RATRState));
++					RT_TRACE(COMP_RATR, DBG_LOUD, ("PreState = %d, CurState = %d\n", pEntryRA->PreRATRState, pEntryRA->RATRState));
++					pAdapter->HalFunc.UpdateHalRAMaskHandler(
++											pTargetAdapter,
++											FALSE,
++											pEntry->AID+1,
++											pEntry->MacAddr,
++											pEntry,
++											pEntryRA->RATRState);
++					pEntryRA->PreRATRState = pEntryRA->RATRState;
++				}
++
++			}
++		}
++	}
++#endif	
++}
++
++static VOID
++dm_CheckProtection(
++	IN	PADAPTER	Adapter
++	)
++{
++#if 0
++	PMGNT_INFO		pMgntInfo = &(Adapter->MgntInfo);
++	u1Byte			CurRate, RateThreshold;
++
++	if(pMgntInfo->pHTInfo->bCurBW40MHz)
++		RateThreshold = MGN_MCS1;
++	else
++		RateThreshold = MGN_MCS3;
++
++	if(Adapter->TxStats.CurrentInitTxRate <= RateThreshold)
++	{
++		pMgntInfo->bDmDisableProtect = TRUE;
++		DbgPrint("Forced disable protect: %x\n", Adapter->TxStats.CurrentInitTxRate);
++	}
++	else
++	{
++		pMgntInfo->bDmDisableProtect = FALSE;
++		DbgPrint("Enable protect: %x\n", Adapter->TxStats.CurrentInitTxRate);
++	}
++#endif
++}
++
++static VOID
++dm_CheckStatistics(
++	IN	PADAPTER	Adapter
++	)
++{
++#if 0
++	if(!Adapter->MgntInfo.bMediaConnect)
++		return;
++
++	//2008.12.10 tynli Add for getting Current_Tx_Rate_Reg flexibly.
++	rtw_hal_get_hwreg( Adapter, HW_VAR_INIT_TX_RATE, (pu1Byte)(&Adapter->TxStats.CurrentInitTxRate) );
++
++	// Calculate current Tx Rate(Successful transmited!!)
++
++	// Calculate current Rx Rate(Successful received!!)
++	
++	//for tx tx retry count
++	rtw_hal_get_hwreg( Adapter, HW_VAR_RETRY_COUNT, (pu1Byte)(&Adapter->TxStats.NumTxRetryCount) );
++#endif	
++}
++
++static void dm_CheckPbcGPIO(_adapter *padapter)
++{	
++	u8	tmp1byte;
++	u8	bPbcPressed = _FALSE;
++	int i=0;
++
++	if(!padapter->registrypriv.hw_wps_pbc)
++		return;
++
++	do
++	{
++		i++;
++#ifdef CONFIG_USB_HCI
++	tmp1byte = rtw_read8(padapter, GPIO_IO_SEL);
++	tmp1byte |= (HAL_8192C_HW_GPIO_WPS_BIT);
++	rtw_write8(padapter, GPIO_IO_SEL, tmp1byte);	//enable GPIO[2] as output mode
++
++	tmp1byte &= ~(HAL_8192C_HW_GPIO_WPS_BIT);
++	rtw_write8(padapter,  GPIO_IN, tmp1byte);		//reset the floating voltage level
++
++	tmp1byte = rtw_read8(padapter, GPIO_IO_SEL);
++	tmp1byte &= ~(HAL_8192C_HW_GPIO_WPS_BIT);
++	rtw_write8(padapter, GPIO_IO_SEL, tmp1byte);	//enable GPIO[2] as input mode
++
++	tmp1byte =rtw_read8(padapter, GPIO_IN);
++	
++	if (tmp1byte == 0xff)
++	{
++		bPbcPressed = _FALSE;
++		break ;
++	}	
++
++	if (tmp1byte&HAL_8192C_HW_GPIO_WPS_BIT)
++	{
++		bPbcPressed = _TRUE;
++
++		if(i<=3)
++			rtw_msleep_os(50);
++	}
++#else
++	tmp1byte = rtw_read8(padapter, GPIO_IN);
++	//RT_TRACE(COMP_IO, DBG_TRACE, ("dm_CheckPbcGPIO - %x\n", tmp1byte));
++
++	if (tmp1byte == 0xff || padapter->init_adpt_in_progress)
++	{
++		bPbcPressed = _FALSE;
++		break ;
++	}
++
++	if((tmp1byte&HAL_8192C_HW_GPIO_WPS_BIT)==0)
++	{
++		bPbcPressed = _TRUE;
++
++		if(i<=3)
++			rtw_msleep_os(50);
++	}
++#endif		
++
++	}while(i<=3 && bPbcPressed == _TRUE);
++	
++	if( _TRUE == bPbcPressed)
++	{
++		// Here we only set bPbcPressed to true
++		// After trigger PBC, the variable will be set to false		
++		DBG_8192C("CheckPbcGPIO - PBC is pressed, try_cnt=%d\n", i-1);
++                
++#ifdef RTK_DMP_PLATFORM
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,12))
++		kobject_uevent(&padapter->pnetdev->dev.kobj, KOBJ_NET_PBC);
++#else
++		kobject_hotplug(&padapter->pnetdev->class_dev.kobj, KOBJ_NET_PBC);
++#endif
++#else
++
++		if ( padapter->pid[0] == 0 )
++		{	//	0 is the default value and it means the application monitors the HW PBC doesn't privde its pid to driver.
++			return;
++		}
++
++#ifdef PLATFORM_LINUX
++		rtw_signal_process(padapter->pid[0], SIGUSR1);
++#endif
++#endif
++	}	
++}
++
++#ifdef CONFIG_PCI_HCI
++//
++//	Description:
++//		Perform interrupt migration dynamically to reduce CPU utilization.
++//
++//	Assumption:
++//		1. Do not enable migration under WIFI test.
++//
++//	Created by Roger, 2010.03.05.
++//
++VOID
++dm_InterruptMigration(
++	IN	PADAPTER	Adapter
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	struct mlme_priv	*pmlmepriv = &(Adapter->mlmepriv);
++	BOOLEAN			bCurrentIntMt, bCurrentACIntDisable;
++	BOOLEAN			IntMtToSet = _FALSE; 
++	BOOLEAN			ACIntToSet = _FALSE;
++	
++	
++	// Retrieve current interrupt migration and Tx four ACs IMR settings first.
++	bCurrentIntMt = pHalData->bInterruptMigration;
++	bCurrentACIntDisable = pHalData->bDisableTxInt;
++
++	//
++	// <Roger_Notes> Currently we use busy traffic for reference instead of RxIntOK counts to prevent non-linear Rx statistics 
++	// when interrupt migration is set before. 2010.03.05.
++	// 
++	if(!Adapter->registrypriv.wifi_spec && 
++		(check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) &&
++		pmlmepriv->LinkDetectInfo.bHigherBusyTraffic)
++	{			
++		IntMtToSet = _TRUE;
++
++		// To check whether we should disable Tx interrupt or not.
++		if(pmlmepriv->LinkDetectInfo.bHigherBusyRxTraffic )
++			ACIntToSet = _TRUE;				
++	}		
++	
++	//Update current settings.
++	if( bCurrentIntMt != IntMtToSet ){
++		DBG_8192C("%s(): Update interrrupt migration(%d)\n",__FUNCTION__,IntMtToSet);
++		if(IntMtToSet)
++		{
++			//
++			// <Roger_Notes> Set interrrupt migration timer and corresponging Tx/Rx counter. 
++			// timer 25ns*0xfa0=100us for 0xf packets.
++			// 2010.03.05.
++			//
++			rtw_write32(Adapter, REG_INT_MIG, 0xff000fa0);// 0x306:Rx, 0x307:Tx
++			pHalData->bInterruptMigration = IntMtToSet;
++		}
++		else
++		{
++			// Reset all interrupt migration settings.
++			rtw_write32(Adapter, REG_INT_MIG, 0);
++			pHalData->bInterruptMigration = IntMtToSet;
++		}
++	}
++
++	/*if( bCurrentACIntDisable != ACIntToSet ){
++		DBG_8192C("%s(): Update AC interrrupt(%d)\n",__FUNCTION__,ACIntToSet);
++		if(ACIntToSet) // Disable four ACs interrupts.
++		{
++			//
++			// <Roger_Notes> Disable VO, VI, BE and BK four AC interrupts to gain more efficient CPU utilization.
++			// When extremely highly Rx OK occurs, we will disable Tx interrupts.
++			// 2010.03.05.
++			//
++			UpdateInterruptMask8192CE( Adapter, 0, RT_AC_INT_MASKS );
++			pHalData->bDisableTxInt = ACIntToSet;
++		}
++		else// Enable four ACs interrupts.
++		{
++			UpdateInterruptMask8192CE( Adapter, RT_AC_INT_MASKS, 0 );
++			pHalData->bDisableTxInt = ACIntToSet;
++		}
++	}*/
++	
++}
++
++#endif
++
++//
++// Initialize GPIO setting registers
++//
++static void
++dm_InitGPIOSetting(
++	IN	PADAPTER	Adapter
++	)
++{
++	PHAL_DATA_TYPE		pHalData = GET_HAL_DATA(Adapter);
++	
++	u8	tmp1byte;
++	
++	tmp1byte = rtw_read8(Adapter, REG_GPIO_MUXCFG);
++	tmp1byte &= (GPIOSEL_GPIO | ~GPIOSEL_ENBT);
++	
++#ifdef CONFIG_BT_COEXIST
++	// UMB-B cut bug. We need to support the modification.
++	if (IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID) && 
++		pHalData->bt_coexist.BT_Coexist)
++	{
++		tmp1byte |= (BIT5);	
++	}
++#endif	
++	rtw_write8(Adapter, REG_GPIO_MUXCFG, tmp1byte);
++
++}
++
++static void update_EDCA_param(_adapter *padapter)
++{
++	u32 	trafficIndex;
++	u32	edca_param;
++	u64	cur_tx_bytes = 0;
++	u64	cur_rx_bytes = 0;
++	PHAL_DATA_TYPE		pHalData = GET_HAL_DATA(padapter);
++	struct dm_priv		*pdmpriv = &pHalData->dmpriv;
++	struct xmit_priv		*pxmitpriv = &(padapter->xmitpriv);
++	struct recv_priv		*precvpriv = &(padapter->recvpriv);
++	struct registry_priv	*pregpriv = &padapter->registrypriv;
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	
++#ifdef CONFIG_BT_COEXIST
++	struct btcoexist_priv	*pbtpriv = &(pHalData->bt_coexist);	
++	u8	bbtchange = _FALSE;
++#endif
++	
++
++	//DBG_871X("%s\n", __FUNCTION__);
++
++	//associated AP
++	if ((pregpriv->wifi_spec == 1) || (pmlmeinfo->HT_enable == 0))
++	{
++		return;
++	}
++	
++	if (pmlmeinfo->assoc_AP_vendor >= maxAP)
++	{
++		return;
++	}
++
++	cur_tx_bytes = pxmitpriv->tx_bytes - pxmitpriv->last_tx_bytes;
++	cur_rx_bytes = precvpriv->rx_bytes - precvpriv->last_rx_bytes;
++
++	//traffic, TX or RX
++	if((pmlmeinfo->assoc_AP_vendor == ralinkAP)||(pmlmeinfo->assoc_AP_vendor == atherosAP))
++	{
++		if (cur_tx_bytes > (cur_rx_bytes << 2))
++		{ // Uplink TP is present.
++			trafficIndex = UP_LINK; 
++		}
++		else
++		{ // Balance TP is present.
++			trafficIndex = DOWN_LINK;
++		}
++	}
++	else
++	{
++		if (cur_rx_bytes > (cur_tx_bytes << 2))
++		{ // Downlink TP is present.
++			trafficIndex = DOWN_LINK;
++		}
++		else
++		{ // Balance TP is present.
++			trafficIndex = UP_LINK;
++		}
++	}
++
++#ifdef CONFIG_BT_COEXIST
++	if(pbtpriv->BT_Coexist)
++	{
++		if( (pbtpriv->BT_EDCA[UP_LINK]!=0) ||  (pbtpriv->BT_EDCA[DOWN_LINK]!=0))
++		{
++			bbtchange = _TRUE;
++		}
++	}
++#endif
++
++	if (pdmpriv->prv_traffic_idx != trafficIndex)
++	{
++#if 0
++#ifdef CONFIG_BT_COEXIST
++		if(_TRUE == bbtchange)		
++			rtw_write32(padapter, REG_EDCA_BE_PARAM, pbtpriv->BT_EDCA[trafficIndex]);		
++		else
++#endif
++		//adjust EDCA parameter for BE queue
++		//fire_write_MAC_cmd(padapter, EDCA_BE_PARAM, EDCAParam[pmlmeinfo->assoc_AP_vendor][trafficIndex]);
++		rtw_write32(padapter, REG_EDCA_BE_PARAM, EDCAParam[pmlmeinfo->assoc_AP_vendor][trafficIndex]);
++
++#else
++		if((pmlmeinfo->assoc_AP_vendor == ciscoAP) && (pmlmeext->cur_wireless_mode & WIRELESS_11_24N))
++		{
++			edca_param = EDCAParam[pmlmeinfo->assoc_AP_vendor][trafficIndex];
++		}
++		else if((pmlmeinfo->assoc_AP_vendor == airgocapAP) &&
++			((pmlmeext->cur_wireless_mode == WIRELESS_11G) ||(pmlmeext->cur_wireless_mode == WIRELESS_11BG)))
++		{
++			edca_param = EDCAParam[pmlmeinfo->assoc_AP_vendor][trafficIndex];
++		}
++		else
++		{
++			edca_param = EDCAParam[unknownAP][trafficIndex];
++		}
++
++#ifdef CONFIG_BT_COEXIST
++		if(_TRUE == bbtchange)		
++			edca_param = pbtpriv->BT_EDCA[trafficIndex];
++#endif
++
++		rtw_write32(padapter, REG_EDCA_BE_PARAM, edca_param);
++#endif
++		pdmpriv->prv_traffic_idx = trafficIndex;
++	}
++	
++//exit_update_EDCA_param:	
++
++	pxmitpriv->last_tx_bytes = pxmitpriv->tx_bytes;
++	precvpriv->last_rx_bytes = precvpriv->rx_bytes;
++
++	return;
++}
++
++static void dm_InitDynamicBBPowerSaving(
++	IN	PADAPTER	Adapter
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	PS_T	*pPSTable = &pdmpriv->DM_PSTable;
++
++	pPSTable->PreCCAState = CCA_MAX;
++	pPSTable->CurCCAState = CCA_MAX;
++	pPSTable->PreRFState = RF_MAX;
++	pPSTable->CurRFState = RF_MAX;
++	pPSTable->Rssi_val_min = 0;
++}
++
++static void dm_1R_CCA(
++	IN	PADAPTER	pAdapter)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	PS_T	*pPSTable = &pdmpriv->DM_PSTable;
++
++	if(pPSTable->Rssi_val_min != 0)
++	{
++		if(pPSTable->PreCCAState == CCA_2R)
++		{
++			if(pPSTable->Rssi_val_min >= 35)
++				pPSTable->CurCCAState = CCA_1R;
++			else
++				pPSTable->CurCCAState = CCA_2R;
++		}
++		else{
++			if(pPSTable->Rssi_val_min <= 30)
++				pPSTable->CurCCAState = CCA_2R;
++			else
++				pPSTable->CurCCAState = CCA_1R;
++		}
++	}
++	else
++		pPSTable->CurCCAState=CCA_MAX;
++
++	if(pPSTable->PreCCAState != pPSTable->CurCCAState)
++	{
++		if(pPSTable->CurCCAState == CCA_1R)
++		{
++			if(pHalData->rf_type == RF_2T2R)
++			{
++				PHY_SetBBReg(pAdapter, rOFDM0_TRxPathEnable  , bMaskByte0, 0x13);
++				PHY_SetBBReg(pAdapter, 0xe70, bMaskByte3, 0x20);
++			}
++			else
++			{
++				PHY_SetBBReg(pAdapter, rOFDM0_TRxPathEnable  , bMaskByte0, 0x23);
++				PHY_SetBBReg(pAdapter, 0xe70, 0x7fc00000, 0x10c); // Set RegE70[30:22] = 9b'100001100
++			}
++		}
++		else
++		{
++			PHY_SetBBReg(pAdapter, rOFDM0_TRxPathEnable, bMaskByte0, 0x33);
++			PHY_SetBBReg(pAdapter,0xe70, bMaskByte3, 0x63);
++		}
++		pPSTable->PreCCAState = pPSTable->CurCCAState;
++	}
++	//DBG_8192C("dm_1R_CCA(): CCAStage=%x\n", pPSTable->CurCCAState);
++}
++
++void
++rtl8192c_dm_RF_Saving(
++	IN	PADAPTER	pAdapter,
++	IN	u8	bForceInNormal 
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	PS_T	*pPSTable = &pdmpriv->DM_PSTable;
++
++	if(pdmpriv->initialize == 0){
++		pdmpriv->rf_saving_Reg874 = (PHY_QueryBBReg(pAdapter, rFPGA0_XCD_RFInterfaceSW, bMaskDWord)&0x1CC000)>>14;
++		pdmpriv->rf_saving_RegC70 = (PHY_QueryBBReg(pAdapter, rOFDM0_AGCParameter1, bMaskDWord)&BIT3)>>3;
++		pdmpriv->rf_saving_Reg85C = (PHY_QueryBBReg(pAdapter, rFPGA0_XCD_SwitchControl, bMaskDWord)&0xFF000000)>>24;
++		pdmpriv->rf_saving_RegA74 = (PHY_QueryBBReg(pAdapter, 0xa74, bMaskDWord)&0xF000)>>12;
++		//Reg818 = PHY_QueryBBReg(pAdapter, 0x818, bMaskDWord);
++		pdmpriv->initialize = 1;
++	}
++
++	if(!bForceInNormal)
++	{
++		if(pPSTable->Rssi_val_min != 0)
++		{
++			 
++			if(pPSTable->PreRFState == RF_Normal)
++			{
++			#ifdef CONFIG_SPECIAL_SETTING_FOR_FUNAI_TV
++				if(pPSTable->Rssi_val_min >= 50)
++			#else
++				if(pPSTable->Rssi_val_min >= 30)
++			#endif
++					pPSTable->CurRFState = RF_Save;
++				else
++					pPSTable->CurRFState = RF_Normal;
++			}
++			else{
++			#ifdef CONFIG_SPECIAL_SETTING_FOR_FUNAI_TV
++				if(pPSTable->Rssi_val_min <= 45)
++			#else
++				if(pPSTable->Rssi_val_min <= 25)
++			#endif
++					pPSTable->CurRFState = RF_Normal;
++				else
++					pPSTable->CurRFState = RF_Save;
++			}
++		}
++		else
++			pPSTable->CurRFState=RF_MAX;
++	}
++	else
++	{
++		pPSTable->CurRFState = RF_Normal;
++	}
++	
++	if(pPSTable->PreRFState != pPSTable->CurRFState)
++	{
++		if(pPSTable->CurRFState == RF_Save)
++		{
++			PHY_SetBBReg(pAdapter, rFPGA0_XCD_RFInterfaceSW  , 0x1C0000, 0x2); //Reg874[20:18]=3'b010
++			PHY_SetBBReg(pAdapter, rOFDM0_AGCParameter1, BIT3, 0); //RegC70[3]=1'b0
++			PHY_SetBBReg(pAdapter, rFPGA0_XCD_SwitchControl, 0xFF000000, 0x63); //Reg85C[31:24]=0x63
++			PHY_SetBBReg(pAdapter, rFPGA0_XCD_RFInterfaceSW, 0xC000, 0x2); //Reg874[15:14]=2'b10
++			PHY_SetBBReg(pAdapter, 0xa74, 0xF000, 0x3); //RegA75[7:4]=0x3
++			PHY_SetBBReg(pAdapter, 0x818, BIT28, 0x0); //Reg818[28]=1'b0
++			PHY_SetBBReg(pAdapter, 0x818, BIT28, 0x1); //Reg818[28]=1'b1
++			DBG_8192C("%s(): RF_Save\n", __FUNCTION__);
++		}
++		else
++		{
++			PHY_SetBBReg(pAdapter, rFPGA0_XCD_RFInterfaceSW  , 0x1CC000, pdmpriv->rf_saving_Reg874);
++			PHY_SetBBReg(pAdapter, rOFDM0_AGCParameter1, BIT3, pdmpriv->rf_saving_RegC70);
++			PHY_SetBBReg(pAdapter, rFPGA0_XCD_SwitchControl, 0xFF000000, pdmpriv->rf_saving_Reg85C);
++			PHY_SetBBReg(pAdapter, 0xa74, 0xF000, pdmpriv->rf_saving_RegA74);
++			PHY_SetBBReg(pAdapter, 0x818, BIT28, 0x0);
++			DBG_8192C("%s(): RF_Normal\n", __FUNCTION__);
++		}
++		pPSTable->PreRFState = pPSTable->CurRFState;
++	}
++}
++
++static void
++dm_DynamicBBPowerSaving(
++IN	PADAPTER	pAdapter
++	)
++{	
++
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	struct mlme_priv	*pmlmepriv = &pAdapter->mlmepriv;
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	PS_T	*pPSTable = &pdmpriv->DM_PSTable;
++
++	//1 1.Determine the minimum RSSI 
++	if((check_fwstate(pmlmepriv, _FW_LINKED) != _TRUE) &&	
++		(pdmpriv->EntryMinUndecoratedSmoothedPWDB == 0))
++	{
++		pPSTable->Rssi_val_min = 0;
++		//RT_TRACE(COMP_BB_POWERSAVING, DBG_LOUD, ("Not connected to any \n"));
++	}
++	if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)	// Default port
++	{
++		//if(ACTING_AS_AP(pAdapter) || pMgntInfo->mIbss)
++		 if ((check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE) ||
++			       (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == _TRUE))	//todo: AP Mode
++		{
++			pPSTable->Rssi_val_min = pdmpriv->EntryMinUndecoratedSmoothedPWDB;
++			//RT_TRACE(COMP_BB_POWERSAVING, DBG_LOUD, ("AP Client PWDB = 0x%lx \n", pPSTable->Rssi_val_min));
++		}
++		else
++		{
++			pPSTable->Rssi_val_min = pdmpriv->UndecoratedSmoothedPWDB;
++			//RT_TRACE(COMP_BB_POWERSAVING, DBG_LOUD, ("STA Default Port PWDB = 0x%lx \n", pPSTable->Rssi_val_min));
++		}
++	}
++	else // associated entry pwdb
++	{	
++		pPSTable->Rssi_val_min = pdmpriv->EntryMinUndecoratedSmoothedPWDB;
++		//RT_TRACE(COMP_BB_POWERSAVING, DBG_LOUD, ("AP Ext Port PWDB = 0x%lx \n", pPSTable->Rssi_val_min));
++	}
++	
++	//1 2.Power Saving for 92C
++	if(IS_92C_SERIAL(pHalData->VersionID))
++	{
++		//dm_1R_CCA(pAdapter);
++	}
++	
++	// 20100628 Joseph: Turn off BB power save for 88CE because it makesthroughput unstable.
++	// 20100831 Joseph: Turn ON BB power save again after modifying AGC delay from 900ns to 600ns. 
++	//1 3.Power Saving for 88C
++	else
++	{
++		rtl8192c_dm_RF_Saving(pAdapter, _FALSE);
++	}
++}
++
++
++#ifdef CONFIG_ANTENNA_DIVERSITY
++// Add new function to reset the state of antenna diversity before link.
++//
++void SwAntDivResetBeforeLink8192C(IN PADAPTER Adapter)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	SWAT_T *pDM_SWAT_Table = &pdmpriv->DM_SWAT_Table;
++	
++	pDM_SWAT_Table->SWAS_NoLink_State = 0;
++}
++
++// Compare RSSI for deciding antenna
++void	SwAntDivCompare8192C(PADAPTER Adapter, WLAN_BSSID_EX *dst, WLAN_BSSID_EX *src)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++
++	if((0 != pHalData->AntDivCfg) && (!IS_92C_SERIAL(pHalData->VersionID)) )
++	{
++		//DBG_8192C("update_network=> orgRSSI(%d)(%d),newRSSI(%d)(%d)\n",dst->Rssi,query_rx_pwr_percentage(dst->Rssi),
++		//	src->Rssi,query_rx_pwr_percentage(src->Rssi));
++		//select optimum_antenna for before linked =>For antenna diversity
++		if(dst->Rssi >=  src->Rssi )//keep org parameter
++		{
++			src->Rssi = dst->Rssi;
++			src->PhyInfo.Optimum_antenna = dst->PhyInfo.Optimum_antenna;						
++		}
++	}
++}
++
++// Add new function to reset the state of antenna diversity before link.
++u8 SwAntDivBeforeLink8192C(IN PADAPTER Adapter)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	SWAT_T			*pDM_SWAT_Table = &pdmpriv->DM_SWAT_Table;
++	struct mlme_priv	*pmlmepriv = &(Adapter->mlmepriv);
++	
++	// Condition that does not need to use antenna diversity.
++	if(IS_92C_SERIAL(pHalData->VersionID) ||(pHalData->AntDivCfg==0))
++	{
++		//DBG_8192C("SwAntDivBeforeLink8192C(): No AntDiv Mechanism.\n");
++		return _FALSE;
++	}
++
++	if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)	
++	{
++		pDM_SWAT_Table->SWAS_NoLink_State = 0;
++		return _FALSE;
++	}
++	// Since driver is going to set BB register, it shall check if there is another thread controlling BB/RF.
++/*	
++	if(pHalData->eRFPowerState!=eRfOn || pMgntInfo->RFChangeInProgress || pMgntInfo->bMediaConnect)
++	{
++	
++	
++		RT_TRACE(COMP_SWAS, DBG_LOUD, 
++				("SwAntDivCheckBeforeLink8192C(): RFChangeInProgress(%x), eRFPowerState(%x)\n", 
++				pMgntInfo->RFChangeInProgress,
++				pHalData->eRFPowerState));
++	
++		pDM_SWAT_Table->SWAS_NoLink_State = 0;
++		
++		return FALSE;
++	}
++*/	
++	
++	if(pDM_SWAT_Table->SWAS_NoLink_State == 0){
++		//switch channel
++		pDM_SWAT_Table->SWAS_NoLink_State = 1;
++		pDM_SWAT_Table->CurAntenna = (pDM_SWAT_Table->CurAntenna==Antenna_A)?Antenna_B:Antenna_A;
++
++		//PHY_SetBBReg(Adapter, rFPGA0_XA_RFInterfaceOE, 0x300, pDM_SWAT_Table->CurAntenna);
++		rtw_antenna_select_cmd(Adapter, pDM_SWAT_Table->CurAntenna, _FALSE);
++		//DBG_8192C("%s change antenna to ANT_( %s ).....\n",__FUNCTION__, (pDM_SWAT_Table->CurAntenna==Antenna_A)?"A":"B");
++		return _TRUE;
++	}
++	else
++	{
++		pDM_SWAT_Table->SWAS_NoLink_State = 0;
++		return _FALSE;
++	}
++		
++
++
++}
++#endif
++#ifdef CONFIG_SW_ANTENNA_DIVERSITY
++//
++// 20100514 Luke/Joseph:
++// Add new function to reset antenna diversity state after link.
++//
++void
++SwAntDivRestAfterLink8192C(
++	IN	PADAPTER	Adapter
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	SWAT_T			*pDM_SWAT_Table = &pdmpriv->DM_SWAT_Table;
++
++	if(IS_92C_SERIAL(pHalData->VersionID) ||(pHalData->AntDivCfg==0))	
++		return;
++
++	//DBG_8192C("======>   SwAntDivRestAfterLink <========== \n");
++	pHalData->RSSI_cnt_A= 0;
++	pHalData->RSSI_cnt_B= 0;
++	pHalData->RSSI_test = _FALSE;
++	
++	pDM_SWAT_Table->try_flag = 0xff;
++	pDM_SWAT_Table->RSSI_Trying = 0;	
++	pDM_SWAT_Table->SelectAntennaMap=0xAA;
++	pDM_SWAT_Table->CurAntenna = pHalData->CurAntenna;
++	pDM_SWAT_Table->PreAntenna = pHalData->CurAntenna;
++		
++	pdmpriv->lastTxOkCnt=0;
++	pdmpriv->lastRxOkCnt=0;
++
++	pdmpriv->TXByteCnt_A=0;
++	pdmpriv->TXByteCnt_B=0;
++	pdmpriv->RXByteCnt_A=0;
++	pdmpriv->RXByteCnt_B=0;
++	pdmpriv->DoubleComfirm=0;	
++	pdmpriv->TrafficLoad = TRAFFIC_LOW;
++	
++}
++
++
++//
++// 20100514 Luke/Joseph:
++// Add new function for antenna diversity after link.
++// This is the main function of antenna diversity after link.
++// This function is called in HalDmWatchDog() and dm_SW_AntennaSwitchCallback().
++// HalDmWatchDog() calls this function with SWAW_STEP_PEAK to initialize the antenna test.
++// In SWAW_STEP_PEAK, another antenna and a 500ms timer will be set for testing.
++// After 500ms, dm_SW_AntennaSwitchCallback() calls this function to compare the signal just
++// listened on the air with the RSSI of original antenna.
++// It chooses the antenna with better RSSI.
++// There is also a aged policy for error trying. Each error trying will cost more 5 seconds waiting 
++// penalty to get next try.
++//
++static VOID
++dm_SW_AntennaSwitch(
++	PADAPTER	Adapter,
++	u8			Step
++)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	SWAT_T	*pDM_SWAT_Table = &pdmpriv->DM_SWAT_Table;
++	s32			curRSSI=100, RSSI_A, RSSI_B;
++	u64			curTxOkCnt, curRxOkCnt;
++	u64			CurByteCnt = 0, PreByteCnt = 0;	
++	u8		nextAntenna = 0;
++	u8			Score_A=0, Score_B=0;
++	u8			i;
++
++	// Condition that does not need to use antenna diversity.
++	if(IS_92C_SERIAL(pHalData->VersionID) ||(pHalData->AntDivCfg==0))
++	{
++		//RT_TRACE(COMP_SWAS, DBG_LOUD, ("dm_SW_AntennaSwitch(): No AntDiv Mechanism.\n"));
++		return;
++	}
++	// If dynamic ant_div is disabled.
++	if(!(pdmpriv->DMFlag & DYNAMIC_FUNC_ANT_DIV) )
++	{	
++		return;
++	}
++	
++	if (check_fwstate(&Adapter->mlmepriv, _FW_LINKED)	==_FALSE)
++		return;
++#if 0 //to do
++	// Radio off: Status reset to default and return.
++	if(pHalData->eRFPowerState==eRfOff)
++	{
++		SwAntDivRestAfterLink(Adapter);
++		return;
++	}
++#endif
++	//DBG_8192C("\n............................ %s.........................\n",__FUNCTION__);
++	// Handling step mismatch condition.
++	// Peak step is not finished at last time. Recover the variable and check again.
++	if( Step != pDM_SWAT_Table->try_flag	)
++	{
++		SwAntDivRestAfterLink8192C(Adapter);
++	}
++
++
++	if(pDM_SWAT_Table->try_flag == 0xff)
++	{
++#if 0
++		// Select RSSI checking target
++		if(pMgntInfo->mAssoc && !ACTING_AS_AP(Adapter))
++		{
++			// Target: Infrastructure mode AP.
++			pHalData->RSSI_target = NULL;
++			RT_TRACE(COMP_SWAS, DBG_LOUD, ("dm_SW_AntennaSwitch(): RSSI_target is DEF AP!\n"));
++		}
++		else
++		{
++			u8			index = 0;
++			PRT_WLAN_STA	pEntry = NULL;
++			PADAPTER		pTargetAdapter = NULL;
++		
++			if(	pMgntInfo->mIbss || ACTING_AS_AP(Adapter) )
++			{
++				// Target: AP/IBSS peer.
++				pTargetAdapter = Adapter;
++			}
++			else if(ACTING_AS_AP(ADJUST_TO_ADAPTIVE_ADAPTER(Adapter, FALSE)))
++			{
++				// Target: VWIFI peer.
++				pTargetAdapter = ADJUST_TO_ADAPTIVE_ADAPTER(Adapter, FALSE);
++			}
++
++			if(pTargetAdapter != NULL)
++			{
++				for(index=0; index<ASSOCIATE_ENTRY_NUM; index++)
++				{
++					pEntry = AsocEntry_EnumStation(pTargetAdapter, index);
++					if(pEntry != NULL)
++					{
++						if(pEntry->bAssociated)
++							break;			
++					}
++				}
++			}
++
++			if(pEntry == NULL)
++			{
++				SwAntDivRestAfterLink(Adapter);
++				RT_TRACE(COMP_SWAS, DBG_LOUD, ("dm_SW_AntennaSwitch(): No Link.\n"));
++				return;
++			}
++			else
++			{
++				pHalData->RSSI_target = pEntry;
++				RT_TRACE(COMP_SWAS, DBG_LOUD, ("dm_SW_AntennaSwitch(): RSSI_target is PEER STA\n"));
++			}
++		}
++			
++			
++#endif
++		
++		pHalData->RSSI_cnt_A= 0;
++		pHalData->RSSI_cnt_B= 0;
++		pDM_SWAT_Table->try_flag = 0;
++	//	DBG_8192C("dm_SW_AntennaSwitch(): Set try_flag to 0 prepare for peak!\n");
++		return;
++	}
++	else
++	{
++		curTxOkCnt = Adapter->xmitpriv.tx_bytes - pdmpriv->lastTxOkCnt;
++		curRxOkCnt = Adapter->recvpriv.rx_bytes - pdmpriv->lastRxOkCnt;
++
++		pdmpriv->lastTxOkCnt = Adapter->xmitpriv.tx_bytes ;
++		pdmpriv->lastRxOkCnt = Adapter->recvpriv.rx_bytes ;
++
++		if(pDM_SWAT_Table->try_flag == 1)
++		{
++			if(pDM_SWAT_Table->CurAntenna == Antenna_A)
++		{
++				pdmpriv->TXByteCnt_A += curTxOkCnt;
++				pdmpriv->RXByteCnt_A += curRxOkCnt;
++				//DBG_8192C("#####  TXByteCnt_A(%lld) , RXByteCnt_A(%lld) ####\n",pdmpriv->TXByteCnt_A,pdmpriv->RXByteCnt_A);
++			}
++			else
++			{
++				pdmpriv->TXByteCnt_B += curTxOkCnt;
++				pdmpriv->RXByteCnt_B += curRxOkCnt;
++				//DBG_8192C("#####  TXByteCnt_B(%lld) , RXByteCnt_B(%lld) ####\n",pdmpriv->TXByteCnt_B,pdmpriv->RXByteCnt_B);
++			}
++		
++			nextAntenna = (pDM_SWAT_Table->CurAntenna == Antenna_A)? Antenna_B : Antenna_A;
++			pDM_SWAT_Table->RSSI_Trying--;
++			//DBG_8192C("RSSI_Trying = %d\n",pDM_SWAT_Table->RSSI_Trying);
++			
++			if(pDM_SWAT_Table->RSSI_Trying == 0)
++			{
++				CurByteCnt = (pDM_SWAT_Table->CurAntenna == Antenna_A)? (pdmpriv->TXByteCnt_A+pdmpriv->RXByteCnt_A) : (pdmpriv->TXByteCnt_B+pdmpriv->RXByteCnt_B);
++				PreByteCnt = (pDM_SWAT_Table->CurAntenna == Antenna_A)? (pdmpriv->TXByteCnt_B+pdmpriv->RXByteCnt_B) : (pdmpriv->TXByteCnt_A+pdmpriv->RXByteCnt_A);
++
++				//DBG_8192C("CurByteCnt = %lld\n", CurByteCnt);
++				//DBG_8192C("PreByteCnt = %lld\n",PreByteCnt);		
++				
++				if(pdmpriv->TrafficLoad == TRAFFIC_HIGH)
++				{
++					PreByteCnt = PreByteCnt*9;	//normalize:Cur=90ms:Pre=10ms					
++				}
++				else if(pdmpriv->TrafficLoad == TRAFFIC_LOW)
++				{					
++					//CurByteCnt = CurByteCnt/2;
++					CurByteCnt = CurByteCnt>>1;//normalize:100ms:50ms					
++				}
++
++
++				//DBG_8192C("After DIV=>CurByteCnt = %lld\n", CurByteCnt);
++				//DBG_8192C("PreByteCnt = %lld\n",PreByteCnt);		
++
++				if(pHalData->RSSI_cnt_A > 0)
++					RSSI_A = pHalData->RSSI_sum_A/pHalData->RSSI_cnt_A; 
++				else
++					RSSI_A = 0;
++				if(pHalData->RSSI_cnt_B > 0)
++					RSSI_B = pHalData->RSSI_sum_B/pHalData->RSSI_cnt_B; 
++				else
++					RSSI_B = 0;
++				
++				curRSSI = (pDM_SWAT_Table->CurAntenna == Antenna_A)? RSSI_A : RSSI_B;
++				pDM_SWAT_Table->PreRSSI =  (pDM_SWAT_Table->CurAntenna == Antenna_A)? RSSI_B : RSSI_A;
++				//DBG_8192C("Luke:PreRSSI = %d, CurRSSI = %d\n",pDM_SWAT_Table->PreRSSI, curRSSI);
++				//DBG_8192C("SWAS: preAntenna= %s, curAntenna= %s \n", 
++				//(pDM_SWAT_Table->PreAntenna == Antenna_A?"A":"B"), (pDM_SWAT_Table->CurAntenna == Antenna_A?"A":"B"));
++				//DBG_8192C("Luke:RSSI_A= %d, RSSI_cnt_A = %d, RSSI_B= %d, RSSI_cnt_B = %d\n",
++					//RSSI_A, pHalData->RSSI_cnt_A, RSSI_B, pHalData->RSSI_cnt_B);
++			}
++
++			}
++			else
++			{
++		
++			if(pHalData->RSSI_cnt_A > 0)
++				RSSI_A = pHalData->RSSI_sum_A/pHalData->RSSI_cnt_A; 
++			else
++				RSSI_A = 0;
++			if(pHalData->RSSI_cnt_B > 0)
++				RSSI_B = pHalData->RSSI_sum_B/pHalData->RSSI_cnt_B; 
++			else
++				RSSI_B = 0;
++			curRSSI = (pDM_SWAT_Table->CurAntenna == Antenna_A)? RSSI_A : RSSI_B;
++			pDM_SWAT_Table->PreRSSI =  (pDM_SWAT_Table->PreAntenna == Antenna_A)? RSSI_A : RSSI_B;
++			//DBG_8192C("Ekul:PreRSSI = %d, CurRSSI = %d\n", pDM_SWAT_Table->PreRSSI, curRSSI);
++			//DBG_8192C("SWAS: preAntenna= %s, curAntenna= %s \n", 
++			//(pDM_SWAT_Table->PreAntenna == Antenna_A?"A":"B"), (pDM_SWAT_Table->CurAntenna == Antenna_A?"A":"B"));
++
++			//DBG_8192C("Ekul:RSSI_A= %d, RSSI_cnt_A = %d, RSSI_B= %d, RSSI_cnt_B = %d\n",
++			//	RSSI_A, pHalData->RSSI_cnt_A, RSSI_B, pHalData->RSSI_cnt_B);
++			//RT_TRACE(COMP_SWAS, DBG_LOUD, ("Ekul:curTxOkCnt = %d\n", curTxOkCnt));
++			//RT_TRACE(COMP_SWAS, DBG_LOUD, ("Ekul:curRxOkCnt = %d\n", curRxOkCnt));
++			}
++
++		//1 Trying State
++		if((pDM_SWAT_Table->try_flag == 1)&&(pDM_SWAT_Table->RSSI_Trying == 0))
++		{
++
++			if(pDM_SWAT_Table->TestMode == TP_MODE)
++			{
++				//DBG_8192C("SWAS: TestMode = TP_MODE\n");
++				//DBG_8192C("TRY:CurByteCnt = %lld\n", CurByteCnt);
++				//DBG_8192C("TRY:PreByteCnt = %lld\n",PreByteCnt);		
++				if(CurByteCnt < PreByteCnt)
++				{
++					if(pDM_SWAT_Table->CurAntenna == Antenna_A)
++						pDM_SWAT_Table->SelectAntennaMap=pDM_SWAT_Table->SelectAntennaMap<<1;
++					else
++						pDM_SWAT_Table->SelectAntennaMap=(pDM_SWAT_Table->SelectAntennaMap<<1)+1;
++				}
++				else
++				{
++					if(pDM_SWAT_Table->CurAntenna == Antenna_A)
++						pDM_SWAT_Table->SelectAntennaMap=(pDM_SWAT_Table->SelectAntennaMap<<1)+1;
++					else
++						pDM_SWAT_Table->SelectAntennaMap=pDM_SWAT_Table->SelectAntennaMap<<1;
++				}
++				for (i= 0; i<8; i++)
++				{
++					if(((pDM_SWAT_Table->SelectAntennaMap>>i)&BIT0) == 1)
++						Score_A++;
++					else
++						Score_B++;
++				}
++				//DBG_8192C("SelectAntennaMap=%x\n ",pDM_SWAT_Table->SelectAntennaMap);
++				//DBG_8192C("Score_A=%d, Score_B=%d\n", Score_A, Score_B);
++				
++				if(pDM_SWAT_Table->CurAntenna == Antenna_A)
++				{
++					nextAntenna = (Score_A > Score_B)?Antenna_A:Antenna_B;
++				}
++				else
++				{
++					nextAntenna = (Score_B > Score_A)?Antenna_B:Antenna_A;
++				}
++				//RT_TRACE(COMP_SWAS, DBG_LOUD, ("nextAntenna=%s\n",(nextAntenna==Antenna_A)?"A":"B"));
++				//RT_TRACE(COMP_SWAS, DBG_LOUD, ("preAntenna= %s, curAntenna= %s \n", 
++					//(DM_SWAT_Table.PreAntenna == Antenna_A?"A":"B"), (DM_SWAT_Table.CurAntenna == Antenna_A?"A":"B")));
++
++				if(nextAntenna != pDM_SWAT_Table->CurAntenna)
++				{
++					//DBG_8192C("SWAS: Switch back to another antenna\n");
++				}
++				else
++				{
++					//DBG_8192C("SWAS: current anntena is good\n");
++				}	
++			}
++
++			if(pDM_SWAT_Table->TestMode == RSSI_MODE)
++			{	
++				//DBG_8192C("SWAS: TestMode = RSSI_MODE\n");
++				pDM_SWAT_Table->SelectAntennaMap=0xAA;
++				if(curRSSI < pDM_SWAT_Table->PreRSSI) //Current antenna is worse than previous antenna
++				{
++					//DBG_8192C("SWAS: Switch back to another antenna\n");
++					nextAntenna = (pDM_SWAT_Table->CurAntenna == Antenna_A)? Antenna_B : Antenna_A;
++				}
++				else // current anntena is good
++				{
++					nextAntenna = pDM_SWAT_Table->CurAntenna;
++					//DBG_8192C("SWAS: current anntena is good\n");
++				}
++				}
++				pDM_SWAT_Table->try_flag = 0;
++				pHalData->RSSI_test = _FALSE;
++				pHalData->RSSI_sum_A = 0;
++				pHalData->RSSI_cnt_A = 0;
++				pHalData->RSSI_sum_B = 0;
++				pHalData->RSSI_cnt_B = 0;
++				pdmpriv->TXByteCnt_A = 0;
++				pdmpriv->TXByteCnt_B = 0;
++				pdmpriv->RXByteCnt_A = 0;
++				pdmpriv->RXByteCnt_B = 0;
++			
++			}
++
++		//1 Normal State
++		else if(pDM_SWAT_Table->try_flag == 0)
++			{
++			if(pdmpriv->TrafficLoad == TRAFFIC_HIGH)
++				{
++				if(((curTxOkCnt+curRxOkCnt)>>1) > 1875000)
++					pdmpriv->TrafficLoad = TRAFFIC_HIGH;
++				else
++					pdmpriv->TrafficLoad = TRAFFIC_LOW;
++			}
++			else if(pdmpriv->TrafficLoad == TRAFFIC_LOW)
++				{
++				if(((curTxOkCnt+curRxOkCnt)>>1) > 1875000)
++					pdmpriv->TrafficLoad = TRAFFIC_HIGH;
++				else
++					pdmpriv->TrafficLoad = TRAFFIC_LOW;
++			}
++			if(pdmpriv->TrafficLoad == TRAFFIC_HIGH)
++				pDM_SWAT_Table->bTriggerAntennaSwitch = 0;
++			//DBG_8192C("Normal:TrafficLoad = %lld\n", curTxOkCnt+curRxOkCnt);
++
++			//Prepare To Try Antenna		
++					nextAntenna = (pDM_SWAT_Table->CurAntenna == Antenna_A)? Antenna_B : Antenna_A;
++					pDM_SWAT_Table->try_flag = 1;
++					pHalData->RSSI_test = _TRUE;
++			if((curRxOkCnt+curTxOkCnt) > 1000)
++			{
++				pDM_SWAT_Table->RSSI_Trying = 4;
++				pDM_SWAT_Table->TestMode = TP_MODE;
++				}
++				else
++				{
++				pDM_SWAT_Table->RSSI_Trying = 2;
++				pDM_SWAT_Table->TestMode = RSSI_MODE;
++
++			}
++			//DBG_8192C("SWAS: Normal State -> Begin Trying! TestMode=%s\n",(pDM_SWAT_Table->TestMode == TP_MODE)?"TP":"RSSI");
++			
++			
++			pHalData->RSSI_sum_A = 0;
++			pHalData->RSSI_cnt_A = 0;
++			pHalData->RSSI_sum_B = 0;
++			pHalData->RSSI_cnt_B = 0;
++		}
++	}
++
++	//1 4.Change TRX antenna
++	if(nextAntenna != pDM_SWAT_Table->CurAntenna)
++	{
++		//DBG_8192C("@@@@@@@@ SWAS: Change TX Antenna!\n ");		
++		rtw_antenna_select_cmd(Adapter, nextAntenna, 1);
++	}
++
++	//1 5.Reset Statistics
++	pDM_SWAT_Table->PreAntenna = pDM_SWAT_Table->CurAntenna;
++	pDM_SWAT_Table->CurAntenna = nextAntenna;
++	pDM_SWAT_Table->PreRSSI = curRSSI;
++
++
++	//1 6.Set next timer
++
++	if(pDM_SWAT_Table->RSSI_Trying == 0)
++		return;
++
++	if(pDM_SWAT_Table->RSSI_Trying%2 == 0)
++	{
++		if(pDM_SWAT_Table->TestMode == TP_MODE)
++		{
++			if(pdmpriv->TrafficLoad == TRAFFIC_HIGH)
++			{
++				_set_timer(&pdmpriv->SwAntennaSwitchTimer,10 ); //ms
++				//DBG_8192C("dm_SW_AntennaSwitch(): Test another antenna for 10 ms\n");
++			}
++			else if(pdmpriv->TrafficLoad == TRAFFIC_LOW)
++			{
++				_set_timer(&pdmpriv->SwAntennaSwitchTimer, 50 ); //ms
++				//DBG_8192C("dm_SW_AntennaSwitch(): Test another antenna for 50 ms\n");
++			}
++	}
++	else
++	{
++			_set_timer(&pdmpriv->SwAntennaSwitchTimer, 500 ); //ms
++			//DBG_8192C("dm_SW_AntennaSwitch(): Test another antenna for 500 ms\n");
++		}
++	}
++	else
++	{
++		if(pDM_SWAT_Table->TestMode == TP_MODE)
++		{
++			if(pdmpriv->TrafficLoad == TRAFFIC_HIGH)			
++				_set_timer(&pdmpriv->SwAntennaSwitchTimer,90 ); //ms			
++			else if(pdmpriv->TrafficLoad == TRAFFIC_LOW)
++				_set_timer(&pdmpriv->SwAntennaSwitchTimer,100 ); //ms
++		}
++		else
++		{
++			_set_timer(&pdmpriv->SwAntennaSwitchTimer,500 ); //ms
++			//DBG_8192C("dm_SW_AntennaSwitch(): Test another antenna for 500 ms\n");
++		}
++	}
++
++//	RT_TRACE(COMP_SWAS, DBG_LOUD, ("SWAS: -----The End-----\n "));
++
++}
++
++//
++// 20100514 Luke/Joseph:
++// Callback function for 500ms antenna test trying.
++//
++static void dm_SW_AntennaSwitchCallback(void *FunctionContext)
++{
++	_adapter *padapter = (_adapter *)FunctionContext;
++
++	if(padapter->net_closed == _TRUE)
++			return;
++	// Only 
++	dm_SW_AntennaSwitch(padapter, SWAW_STEP_DETERMINE);
++}
++
++
++//
++// 20100722
++// This function is used to gather the RSSI information for antenna testing.
++// It selects the RSSI of the peer STA that we want to know.
++//
++void SwAntDivRSSICheck8192C(_adapter *padapter ,u32 RxPWDBAll)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);	
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++
++	SWAT_T	*pDM_SWAT_Table = &pdmpriv->DM_SWAT_Table;
++
++	if(IS_92C_SERIAL(pHalData->VersionID) ||pHalData->AntDivCfg==0)
++		return;
++	
++	if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)		
++	{			
++		if(pDM_SWAT_Table->CurAntenna == Antenna_A)
++		{			
++			pHalData->RSSI_sum_A += RxPWDBAll;
++			pHalData->RSSI_cnt_A++;
++		}
++		else
++		{
++			pHalData->RSSI_sum_B+= RxPWDBAll;
++			pHalData->RSSI_cnt_B++;
++		
++		}
++		//DBG_8192C("%s Ant_(%s),RSSI_sum(%d),RSSI_cnt(%d)\n",__FUNCTION__,(2==pHalData->CurAntenna)?"A":"B",pHalData->RSSI_sum,pHalData->RSSI_cnt);
++	}
++	
++}
++
++
++
++static VOID
++dm_SW_AntennaSwitchInit(
++	IN	PADAPTER	Adapter
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	SWAT_T	*pDM_SWAT_Table = &pdmpriv->DM_SWAT_Table;
++
++	pHalData->RSSI_sum_A = 0;	
++	pHalData->RSSI_sum_B = 0;
++	pHalData->RSSI_cnt_A = 0;
++	pHalData->RSSI_cnt_B = 0;
++
++	pDM_SWAT_Table->CurAntenna = pHalData->CurAntenna;
++	pDM_SWAT_Table->PreAntenna = pHalData->CurAntenna;
++	pDM_SWAT_Table->try_flag = 0xff;
++	pDM_SWAT_Table->PreRSSI = 0;
++	pDM_SWAT_Table->bTriggerAntennaSwitch = 0;	
++	pDM_SWAT_Table->SelectAntennaMap=0xAA;
++	
++	// Move the timer initialization to InitializeVariables function.
++	//PlatformInitializeTimer(Adapter, &pMgntInfo->SwAntennaSwitchTimer, (RT_TIMER_CALL_BACK)dm_SW_AntennaSwitchCallback, NULL, "SwAntennaSwitchTimer");	
++}
++
++#endif
++
++//#define	RSSI_CCK	0
++//#define	RSSI_OFDM	1
++static void dm_RSSIMonitorInit(
++	IN	PADAPTER	Adapter
++)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	pdmpriv->OFDM_Pkt_Cnt = 0;
++	pdmpriv->RSSI_Select = RSSI_DEFAULT;
++}
++
++static void dm_RSSIMonitorCheck(
++	IN	PADAPTER	Adapter
++)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	struct mlme_priv *pmlmepriv = &Adapter->mlmepriv;
++
++	if(check_fwstate(pmlmepriv, _FW_LINKED) == _FALSE)
++		return;
++		
++	if(check_fwstate(pmlmepriv, WIFI_AP_STATE |WIFI_ADHOC_STATE) == _TRUE )
++	{
++		if(Adapter->stapriv.asoc_sta_count < 2)
++			return;			
++	}		
++	
++	if(pdmpriv->OFDM_Pkt_Cnt == 0)
++		pdmpriv->RSSI_Select = RSSI_CCK;
++	else
++		pdmpriv->RSSI_Select = RSSI_OFDM;
++
++	pdmpriv->OFDM_Pkt_Cnt = 0;	
++	//DBG_8192C("RSSI_Select=%s OFDM_Pkt_Cnt(%d)\n",
++		//(pdmpriv->RSSI_Select == RSSI_OFDM)?"RSSI_OFDM":"RSSI_CCK",
++		//pdmpriv->OFDM_Pkt_Cnt);
++}
++
++//============================================================
++// functions
++//============================================================
++void rtl8192c_init_dm_priv(IN PADAPTER Adapter)
++{
++	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++
++	//_rtw_memset(pdmpriv, 0, sizeof(struct dm_priv));
++
++#ifdef CONFIG_SW_ANTENNA_DIVERSITY
++	_init_timer(&(pdmpriv->SwAntennaSwitchTimer),  Adapter->pnetdev , dm_SW_AntennaSwitchCallback, Adapter);
++#endif
++}
++
++void rtl8192c_deinit_dm_priv(IN PADAPTER Adapter)
++{
++	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++
++#ifdef CONFIG_SW_ANTENNA_DIVERSITY
++	_cancel_timer_ex(&pdmpriv->SwAntennaSwitchTimer);
++#endif
++}
++#ifdef CONFIG_HW_ANTENNA_DIVERSITY
++void dm_InitHybridAntDiv(IN PADAPTER Adapter)
++{
++	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(Adapter);
++
++	if(IS_92C_SERIAL(pHalData->VersionID) ||pHalData->AntDivCfg==0)
++		return;
++	
++	//Set OFDM HW RX Antenna Diversity
++	PHY_SetBBReg(Adapter,0xc50, BIT7, 1); //Enable Hardware antenna switch
++	PHY_SetBBReg(Adapter,0x870, BIT9|BIT8, 0); //Enable hardware control of "ANT_SEL" & "ANT_SELB"
++	PHY_SetBBReg(Adapter,0xCA4, BIT11, 0); //Switch to another antenna by checking pwdb threshold
++	PHY_SetBBReg(Adapter,0xCA4, 0x7FF, 0x080); //Pwdb threshold=8dB
++	PHY_SetBBReg(Adapter,0xC54, BIT23, 1); //Decide final antenna by comparing 2 antennas' pwdb
++	PHY_SetBBReg(Adapter,0x874, BIT23, 0); //No update ANTSEL during GNT_BT=1
++	PHY_SetBBReg(Adapter,0x80C, BIT21, 1); //TX atenna selection from tx_info
++	//Set CCK HW RX Antenna Diversity
++	PHY_SetBBReg(Adapter,0xA00, BIT15, 1);//Enable antenna diversity
++	PHY_SetBBReg(Adapter,0xA0C, BIT4, 0); //Antenna diversity decision period = 32 sample
++	PHY_SetBBReg(Adapter,0xA0C, 0xf, 0xf); //Threshold for antenna diversity. Check another antenna power if input power < ANT_lim*4
++	PHY_SetBBReg(Adapter,0xA10, BIT13, 1); //polarity ana_A=1 and ana_B=0
++	PHY_SetBBReg(Adapter,0xA14, 0x1f, 0x8); //default antenna power = inpwr*(0.5 + r_ant_step/16)
++	
++	pHalData->CCK_Ant1_Cnt = 0;
++	pHalData->CCK_Ant2_Cnt = 0;
++	pHalData->OFDM_Ant1_Cnt = 0;
++	pHalData->OFDM_Ant2_Cnt = 0;
++}
++
++
++#define 	RxDefaultAnt1		0x65a9
++#define	RxDefaultAnt2		0x569a
++
++void dm_SelectRXDefault(IN	PADAPTER	Adapter)
++{
++	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(Adapter);
++	
++	if(IS_92C_SERIAL(pHalData->VersionID) ||pHalData->AntDivCfg==0)
++		return;
++	
++	//DbgPrint(" Ant1_Cnt=%d, Ant2_Cnt=%d\n", pHalData->Ant1_Cnt, pHalData->Ant2_Cnt);
++	//DBG_8192C(" CCK_Ant1_Cnt = %d,  CCK_Ant2_Cnt = %d\n", pHalData->CCK_Ant1_Cnt, pHalData->CCK_Ant2_Cnt);
++	//DBG_8192C(" OFDM_Ant1_Cnt = %d,  OFDM_Ant2_Cnt = %d\n", pHalData->OFDM_Ant1_Cnt, pHalData->OFDM_Ant2_Cnt);
++	if((pHalData->OFDM_Ant1_Cnt == 0) && (pHalData->OFDM_Ant2_Cnt == 0)) 
++	{
++		if((pHalData->CCK_Ant1_Cnt + pHalData->CCK_Ant2_Cnt) >=10 )
++		{
++			if(pHalData->CCK_Ant1_Cnt > (5*pHalData->CCK_Ant2_Cnt))
++			{
++				DBG_8192C(" RX Default = Ant1\n");
++				PHY_SetBBReg(Adapter, 0x858, 0xFFFF, RxDefaultAnt1);
++			}
++			else if(pHalData->CCK_Ant2_Cnt > (5*pHalData->CCK_Ant1_Cnt))
++			{
++				DBG_8192C(" RX Default = Ant2\n");
++				PHY_SetBBReg(Adapter, 0x858, 0xFFFF, RxDefaultAnt2);
++			}
++			else if(pHalData->CCK_Ant1_Cnt > pHalData->CCK_Ant2_Cnt)
++			{
++				DBG_8192C(" RX Default = Ant2\n");
++				PHY_SetBBReg(Adapter, 0x858, 0xFFFF, RxDefaultAnt2);
++			}
++			else
++			{
++				DBG_8192C(" RX Default = Ant1\n");
++				PHY_SetBBReg(Adapter, 0x858, 0xFFFF, RxDefaultAnt1);
++			}
++			pHalData->CCK_Ant1_Cnt = 0;
++			pHalData->CCK_Ant2_Cnt = 0;
++			pHalData->OFDM_Ant1_Cnt = 0;
++			pHalData->OFDM_Ant2_Cnt = 0;
++		}
++	}
++	else
++	{
++		if(pHalData->OFDM_Ant1_Cnt > pHalData->OFDM_Ant2_Cnt)
++		{
++			DBG_8192C(" RX Default = Ant1\n");
++			PHY_SetBBReg(Adapter, 0x858, 0xFFFF, RxDefaultAnt1);
++		}
++		else
++		{
++			DBG_8192C(" RX Default = Ant2\n");
++			PHY_SetBBReg(Adapter, 0x858, 0xFFFF, RxDefaultAnt2);
++		}
++		pHalData->CCK_Ant1_Cnt = 0;
++		pHalData->CCK_Ant2_Cnt = 0;
++		pHalData->OFDM_Ant1_Cnt = 0;
++		pHalData->OFDM_Ant2_Cnt = 0;
++	}
++
++
++}
++
++#endif
++
++void
++rtl8192c_InitHalDm(
++	IN	PADAPTER	Adapter
++	)
++{
++	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	u8	i;
++
++#ifdef CONFIG_USB_HCI
++	dm_InitGPIOSetting(Adapter);
++#endif
++
++	pdmpriv->DM_Type = DM_Type_ByDriver;	
++	pdmpriv->DMFlag = DYNAMIC_FUNC_DISABLE;
++	pdmpriv->UndecoratedSmoothedPWDB = (-1);
++	pdmpriv->UndecoratedSmoothedCCK = (-1);
++	
++	
++	//.1 DIG INIT
++	pdmpriv->bDMInitialGainEnable = _TRUE;
++	pdmpriv->DMFlag |= DYNAMIC_FUNC_DIG;
++	dm_DIGInit(Adapter);
++
++	//.2 DynamicTxPower INIT
++	pdmpriv->DMFlag |= DYNAMIC_FUNC_HP;
++	dm_InitDynamicTxPower(Adapter);
++
++	//.3
++	DM_InitEdcaTurbo(Adapter);
++
++	//.4 RateAdaptive INIT
++	dm_InitRateAdaptiveMask(Adapter);
++
++	//.5 Tx Power Tracking Init.
++	pdmpriv->DMFlag |= DYNAMIC_FUNC_SS;
++	DM_InitializeTXPowerTracking(Adapter);
++
++#ifdef CONFIG_BT_COEXIST
++	pdmpriv->DMFlag |= DYNAMIC_FUNC_BT;
++	dm_InitBtCoexistDM(Adapter);
++#endif
++
++	dm_InitDynamicBBPowerSaving(Adapter);
++
++#ifdef CONFIG_SW_ANTENNA_DIVERSITY
++	pdmpriv->DMFlag |= DYNAMIC_FUNC_ANT_DIV;
++	dm_SW_AntennaSwitchInit(Adapter);
++#endif
++
++#ifdef CONFIG_HW_ANTENNA_DIVERSITY
++	pdmpriv->DMFlag |= DYNAMIC_FUNC_ANT_DIV;
++	dm_InitHybridAntDiv(Adapter);
++#endif
++
++	dm_RSSIMonitorInit(Adapter);
++
++	pdmpriv->DMFlag_tmp = pdmpriv->DMFlag;
++
++	// Save REG_INIDATA_RATE_SEL value for TXDESC.
++	for(i = 0 ; i<32 ; i++)
++	{
++		pdmpriv->INIDATA_RATE[i] = rtw_read8(Adapter, REG_INIDATA_RATE_SEL+i) & 0x3f;
++	}
++
++#ifdef CONFIG_DM_ADAPTIVITY
++	pdmpriv->DMFlag |= DYNAMIC_FUNC_ADAPTIVITY;
++	dm_adaptivity_init(Adapter);
++#endif
++
++}
++
++#ifdef CONFIG_CONCURRENT_MODE
++static void FindMinimumRSSI(PADAPTER Adapter)
++{
++	PHAL_DATA_TYPE	pbuddy_HalData;
++	struct dm_priv *pbuddy_dmpriv;
++	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	PADAPTER pbuddy_adapter = Adapter->pbuddy_adapter;
++	struct mlme_priv *pmlmepriv = &Adapter->mlmepriv;
++
++	if(!rtw_buddy_adapter_up(Adapter))
++		return;
++	
++	pbuddy_HalData = GET_HAL_DATA(pbuddy_adapter);
++	pbuddy_dmpriv = &pbuddy_HalData->dmpriv;
++
++	//get min. [PWDB] when both interfaces are connected
++	if((check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE 
++		&& Adapter->stapriv.asoc_sta_count > 2 
++		&& check_buddy_fwstate(Adapter, _FW_LINKED)) || 
++		(check_buddy_fwstate(Adapter, WIFI_AP_STATE) == _TRUE 
++		&& pbuddy_adapter->stapriv.asoc_sta_count > 2
++		&& check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) ||
++		(check_fwstate(pmlmepriv, WIFI_STATION_STATE) 
++		&& check_fwstate(pmlmepriv, _FW_LINKED)
++		&& check_buddy_fwstate(Adapter,WIFI_STATION_STATE) 
++		&& check_buddy_fwstate(Adapter,_FW_LINKED)))
++	{
++		if(pdmpriv->UndecoratedSmoothedPWDB > pbuddy_dmpriv->UndecoratedSmoothedPWDB)
++			pdmpriv->UndecoratedSmoothedPWDB = pbuddy_dmpriv->UndecoratedSmoothedPWDB;
++	}//primary interface is not connected
++	else if((check_buddy_fwstate(Adapter, WIFI_AP_STATE) == _TRUE 
++		&& pbuddy_adapter->stapriv.asoc_sta_count > 2) || 
++		(check_buddy_fwstate(Adapter,WIFI_STATION_STATE) 
++		&& check_buddy_fwstate(Adapter,_FW_LINKED)))
++	{
++		pdmpriv->UndecoratedSmoothedPWDB = pbuddy_dmpriv->UndecoratedSmoothedPWDB;
++	}
++	//secondary is not connected
++	else if((check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE 
++		&& Adapter->stapriv.asoc_sta_count > 2) || 
++		(check_fwstate(pmlmepriv, WIFI_STATION_STATE) 
++		&& check_fwstate(pmlmepriv, _FW_LINKED)))
++	{
++		pbuddy_dmpriv->UndecoratedSmoothedPWDB = 0;
++	}
++	//both interfaces are not connected
++	else
++	{
++		pdmpriv->UndecoratedSmoothedPWDB = 0;
++		pbuddy_dmpriv->UndecoratedSmoothedPWDB = 0;
++	}
++		
++	//primary interface is ap mode
++	if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE && Adapter->stapriv.asoc_sta_count > 2)
++	{
++		pbuddy_dmpriv->EntryMinUndecoratedSmoothedPWDB = 0;
++	}//secondary interface is ap mode
++	else if(check_buddy_fwstate(Adapter, WIFI_AP_STATE) == _TRUE && pbuddy_adapter->stapriv.asoc_sta_count > 2)
++	{
++		pdmpriv->EntryMinUndecoratedSmoothedPWDB = pbuddy_dmpriv->EntryMinUndecoratedSmoothedPWDB;
++	}
++	else //both interfaces are not ap mode
++	{
++		pdmpriv->EntryMinUndecoratedSmoothedPWDB = pbuddy_dmpriv->EntryMinUndecoratedSmoothedPWDB = 0;
++	}
++
++} 
++
++#endif //CONFIG_CONCURRENT_MODE
++
++VOID
++rtl8192c_HalDmWatchDog(
++	IN	PADAPTER	Adapter
++	)
++{
++	BOOLEAN		bFwCurrentInPSMode = _FALSE;
++	BOOLEAN		bFwPSAwake = _TRUE;
++	u8 hw_init_completed = _FALSE;
++	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	struct mlme_priv	*pmlmepriv = &Adapter->mlmepriv;
++#ifdef CONFIG_CONCURRENT_MODE
++	PADAPTER pbuddy_adapter = Adapter->pbuddy_adapter;
++#endif //CONFIG_CONCURRENT_MODE
++
++	#if defined(CONFIG_CONCURRENT_MODE)
++	if (Adapter->isprimary == _FALSE && pbuddy_adapter) {
++		hw_init_completed = pbuddy_adapter->hw_init_completed;
++	} else
++	#endif
++	{
++		hw_init_completed = Adapter->hw_init_completed;
++	}
++
++	if (hw_init_completed == _FALSE)
++		goto skip_dm;
++
++#ifdef CONFIG_LPS
++	#if defined(CONFIG_CONCURRENT_MODE)
++	if (Adapter->iface_type != IFACE_PORT0 && pbuddy_adapter) {
++		bFwCurrentInPSMode = pbuddy_adapter->pwrctrlpriv.bFwCurrentInPSMode;
++		rtw_hal_get_hwreg(pbuddy_adapter, HW_VAR_FWLPS_RF_ON, (u8 *)(&bFwPSAwake));
++	} else
++	#endif
++	{
++		bFwCurrentInPSMode = Adapter->pwrctrlpriv.bFwCurrentInPSMode;
++		rtw_hal_get_hwreg(Adapter, HW_VAR_FWLPS_RF_ON, (u8 *)(&bFwPSAwake));
++	}
++#endif
++
++#ifdef CONFIG_P2P_PS
++	// Fw is under p2p powersaving mode, driver should stop dynamic mechanism.
++	// modifed by thomas. 2011.06.11.
++	if(Adapter->wdinfo.p2p_ps_mode)
++		bFwPSAwake = _FALSE;
++#endif // CONFIG_P2P_PS
++
++	// Stop dynamic mechanism when:
++	// 1. RF is OFF. (No need to do DM.)
++	// 2. Fw is under power saving mode for FwLPS. (Prevent from SW/FW I/O racing.)
++	// 3. IPS workitem is scheduled. (Prevent from IPS sequence to be swapped with DM.
++	//     Sometimes DM execution time is longer than 100ms such that the assertion
++	//     in MgntActSet_RF_State() called by InactivePsWorkItem will be triggered by 
++	//     wating to long for RFChangeInProgress.)
++	// 4. RFChangeInProgress is TRUE. (Prevent from broken by IPS/HW/SW Rf off.)
++	// Noted by tynli. 2010.06.01.
++	//if(rfState == eRfOn)
++	if( (hw_init_completed == _TRUE) 
++		&& ((!bFwCurrentInPSMode) && bFwPSAwake))
++	{
++		//
++		// Calculate Tx/Rx statistics.
++		//
++		dm_CheckStatistics(Adapter);
++
++		//
++		// For PWDB monitor and record some value for later use.
++		//
++		PWDB_Monitor(Adapter);
++
++		dm_RSSIMonitorCheck(Adapter);
++
++#ifdef CONFIG_CONCURRENT_MODE
++		if(Adapter->adapter_type > PRIMARY_ADAPTER)
++			goto _record_initrate;
++
++		FindMinimumRSSI(Adapter);
++#endif
++
++		//
++		// Dynamic Initial Gain mechanism.
++		//
++		dm_FalseAlarmCounterStatistics(Adapter);
++		dm_DIG(Adapter);
++		dm_adaptivity(Adapter);
++
++		//
++		//Dynamic BB Power Saving Mechanism
++		//
++		dm_DynamicBBPowerSaving(Adapter);
++
++		//
++		// Dynamic Tx Power mechanism.
++		//
++		dm_DynamicTxPower(Adapter);
++
++		//
++		// Tx Power Tracking.
++		//
++#if MP_DRIVER == 0
++#ifdef CONFIG_BUSY_TRAFFIC_SKIP_PWR_TRACK
++		if(pmlmepriv->LinkDetectInfo.bBusyTraffic == _FALSE)
++#endif //CONFIG_BUSY_TRAFFIC_SKIP_PWR_TRACK
++#endif
++			rtl8192c_dm_CheckTXPowerTracking(Adapter);
++
++		//
++		// Rate Adaptive by Rx Signal Strength mechanism.
++		//
++		dm_RefreshRateAdaptiveMask(Adapter);
++
++#ifdef CONFIG_BT_COEXIST
++		//BT-Coexist
++		dm_BTCoexist(Adapter);
++#endif
++
++		// EDCA turbo
++		//update the EDCA paramter according to the Tx/RX mode
++		//update_EDCA_param(Adapter);
++		dm_CheckEdcaTurbo(Adapter);
++
++		//
++		// Dynamically switch RTS/CTS protection.
++		//
++		//dm_CheckProtection(Adapter);
++
++#ifdef CONFIG_SW_ANTENNA_DIVERSITY
++		//
++		// Software Antenna diversity
++		//
++		dm_SW_AntennaSwitch(Adapter, SWAW_STEP_PEAK);
++#endif
++
++#ifdef CONFIG_HW_ANTENNA_DIVERSITY
++		//Hybrid Antenna Diversity
++		dm_SelectRXDefault(Adapter);
++#endif
++
++#ifdef CONFIG_PCI_HCI
++		// 20100630 Joseph: Disable Interrupt Migration mechanism temporarily because it degrades Rx throughput.
++		// Tx Migration settings.
++		//dm_InterruptMigration(Adapter);
++
++		//if(Adapter->HalFunc.TxCheckStuckHandler(Adapter))
++		//	PlatformScheduleWorkItem(&(GET_HAL_DATA(Adapter)->HalResetWorkItem));
++#endif
++
++
++_record_initrate:
++
++		// Read REG_INIDATA_RATE_SEL value for TXDESC.
++		if(check_fwstate(&Adapter->mlmepriv, WIFI_STATION_STATE) == _TRUE)
++		{
++			pdmpriv->INIDATA_RATE[0] = rtw_read8(Adapter, REG_INIDATA_RATE_SEL) & 0x3f;
++
++#ifdef CONFIG_TDLS
++			if(Adapter->tdlsinfo.setup_state == TDLS_LINKED_STATE)
++			{
++				u8 i=1;
++				for(; i < (Adapter->tdlsinfo.macid_index) ; i++)
++				{
++					pdmpriv->INIDATA_RATE[i] = rtw_read8(Adapter, (REG_INIDATA_RATE_SEL+i)) & 0x3f;
++				}
++			}
++#endif //CONFIG_TDLS
++
++		}
++		else
++		{
++			u8	i;
++			for(i=1 ; i < (Adapter->stapriv.asoc_sta_count + 1); i++)
++			{
++				pdmpriv->INIDATA_RATE[i] = rtw_read8(Adapter, (REG_INIDATA_RATE_SEL+i)) & 0x3f;
++			}
++		}
++	}
++
++skip_dm:
++
++	// Check GPIO to determine current RF on/off and Pbc status.
++	// Check Hardware Radio ON/OFF or not	
++	//if(Adapter->MgntInfo.PowerSaveControl.bGpioRfSw)
++	//{
++		//RTPRINT(FPWR, PWRHW, ("dm_CheckRfCtrlGPIO \n"));
++	//	dm_CheckRfCtrlGPIO(Adapter);
++	//}
++
++#ifdef CONFIG_PCI_HCI
++	if(pHalData->bGpioHwWpsPbc)
++#endif
++	{
++		dm_CheckPbcGPIO(Adapter);				// Add by hpfan 2008-03-11
++	}
++
++}
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_hal_init.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_hal_init.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_hal_init.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_hal_init.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,3628 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++
++#define _RTL8192C_HAL_INIT_C_
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <rtw_byteorder.h>
++#include <rtw_efuse.h>
++
++#include <rtl8192c_hal.h>
++
++#ifdef CONFIG_USB_HCI
++#include <usb_hal.h>
++#endif
++
++#ifdef CONFIG_PCI_HCI
++#include <pci_hal.h>
++#endif
++
++static BOOLEAN
++hal_EfusePgPacketWrite2ByteHeader(
++	IN	PADAPTER		pAdapter,
++	IN	u8				efuseType,
++	IN	u16				*pAddr,
++	IN	PPGPKT_STRUCT	pTargetPkt,
++	IN	BOOLEAN			bPseudoTest);
++static BOOLEAN
++hal_EfusePgPacketWrite1ByteHeader(
++	IN	PADAPTER		pAdapter, 
++	IN	u8				efuseType,
++	IN	u16				*pAddr,
++	IN	PPGPKT_STRUCT	pTargetPkt,
++	IN	BOOLEAN			bPseudoTest);
++static BOOLEAN
++hal_EfusePgPacketWriteData(
++	IN	PADAPTER		pAdapter, 
++	IN	u8				efuseType,
++	IN	u16				*pAddr,
++	IN	PPGPKT_STRUCT	pTargetPkt,
++	IN	BOOLEAN			bPseudoTest);
++static BOOLEAN 
++hal_EfusePgPacketWrite_BT(
++	IN	PADAPTER		pAdapter, 
++	IN	u8				offset,
++	IN	u8				word_en,
++	IN	u8				*pData,
++	IN	BOOLEAN			bPseudoTest);
++
++static VOID
++_FWDownloadEnable(
++	IN	PADAPTER		Adapter,
++	IN	BOOLEAN			enable
++	)
++{
++	u8	tmp;
++
++	if(enable)
++	{
++		#ifdef DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE
++		{
++			u8 val;
++			if( (val=rtw_read8(Adapter, REG_MCUFWDL)))
++				DBG_871X("DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE %s:%d REG_MCUFWDL:0x%02x\n", __FUNCTION__, __LINE__, val);
++		}
++		#endif
++	
++		// 8051 enable
++		tmp = rtw_read8(Adapter, REG_SYS_FUNC_EN+1);
++		rtw_write8(Adapter, REG_SYS_FUNC_EN+1, tmp|0x04);
++
++		// MCU firmware download enable.
++		tmp = rtw_read8(Adapter, REG_MCUFWDL);
++		rtw_write8(Adapter, REG_MCUFWDL, tmp|0x01);
++
++		// 8051 reset
++		tmp = rtw_read8(Adapter, REG_MCUFWDL+2);
++		rtw_write8(Adapter, REG_MCUFWDL+2, tmp&0xf7);
++	}
++	else
++	{
++		// MCU firmware download enable.
++		tmp = rtw_read8(Adapter, REG_MCUFWDL);
++		rtw_write8(Adapter, REG_MCUFWDL, tmp&0xfe);
++
++		// Reserved for fw extension.
++		rtw_write8(Adapter, REG_MCUFWDL+1, 0x00);
++	}
++}
++
++
++#define MAX_REG_BOLCK_SIZE	196
++#define MIN_REG_BOLCK_SIZE	8
++
++static int
++_BlockWrite(
++	IN		PADAPTER		Adapter,
++	IN		PVOID		buffer,
++	IN		u32			size
++	)
++{
++	int ret = _SUCCESS;
++
++#ifdef CONFIG_PCI_HCI
++	u32			blockSize	= sizeof(u32);	// Use 4-byte write to download FW
++	u8			*bufferPtr	= (u8 *)buffer;
++	u32			*pu4BytePtr	= (u32 *)buffer;
++	u32			i, offset, blockCount, remainSize;
++	u8			remainFW[4] = {0, 0, 0, 0};
++	u8			*p = NULL;
++
++	blockCount = size / blockSize;
++	remainSize = size % blockSize;
++
++	for(i = 0 ; i < blockCount ; i++){
++		offset = i * blockSize;
++		rtw_write32(Adapter, (FW_8192C_START_ADDRESS + offset), cpu_to_le32(*(pu4BytePtr + i)));
++	}
++
++	p = (u8*)((u32*)(bufferPtr + blockCount * blockSize));
++	if(remainSize){
++		switch (remainSize) {
++		case 0:
++			break;
++		case 3:
++			remainFW[2]=*(p+2);
++		case 2: 	
++			remainFW[1]=*(p+1);
++		case 1: 	
++			remainFW[0]=*(p);
++			ret = rtw_write32(Adapter, (FW_8192C_START_ADDRESS + blockCount * blockSize), 
++				 le32_to_cpu(*(u32*)remainFW));	
++		}
++		return ret;
++	}
++#else
++  
++#ifdef SUPPORTED_BLOCK_IO
++	u32			blockSize	= MAX_REG_BOLCK_SIZE;	// Use 196-byte write to download FW	
++	u32			blockSize2  	= MIN_REG_BOLCK_SIZE;	
++#else
++	u32			blockSize	= sizeof(u32);	// Use 4-byte write to download FW
++	u32*		pu4BytePtr	= (u32*)buffer;
++	u32			blockSize2  	= sizeof(u8);
++#endif
++	u8*			bufferPtr	= (u8*)buffer;
++	u32			i, offset = 0, offset2, blockCount, remainSize, remainSize2;
++
++	blockCount = size / blockSize;
++	remainSize = size % blockSize;
++
++	for(i = 0 ; i < blockCount ; i++){
++		offset = i * blockSize;
++		#ifdef SUPPORTED_BLOCK_IO
++		ret = rtw_writeN(Adapter, (FW_8192C_START_ADDRESS + offset), blockSize, (bufferPtr + offset));
++		#else
++		ret = rtw_write32(Adapter, (FW_8192C_START_ADDRESS + offset), le32_to_cpu(*(pu4BytePtr + i)));
++		#endif
++
++		if(ret == _FAIL)
++			goto exit;
++	}
++
++	if(remainSize){
++		#if defined(SUPPORTED_BLOCK_IO) && defined(DBG_BLOCK_WRITE_ISSUE) //Can this be enabled?
++		offset = blockCount * blockSize;
++		ret = rtw_writeN(Adapter, (FW_8192C_START_ADDRESS + offset), remainSize, (bufferPtr + offset));
++		goto exit;
++		#endif
++		offset2 = blockCount * blockSize;		
++		blockCount = remainSize / blockSize2;
++		remainSize2 = remainSize % blockSize2;
++
++		for(i = 0 ; i < blockCount ; i++){
++			offset = offset2 + i * blockSize2;
++			#ifdef SUPPORTED_BLOCK_IO
++			ret = rtw_writeN(Adapter, (FW_8192C_START_ADDRESS + offset), blockSize2, (bufferPtr + offset));
++			#else
++			ret = rtw_write8(Adapter, (FW_8192C_START_ADDRESS + offset ), *(bufferPtr + offset));
++			#endif
++
++			if(ret == _FAIL)
++				goto exit;
++		}		
++
++		if(remainSize2)
++		{
++			offset += blockSize2;
++			bufferPtr += offset;
++			
++			for(i = 0 ; i < remainSize2 ; i++){
++				ret = rtw_write8(Adapter, (FW_8192C_START_ADDRESS + offset + i), *(bufferPtr + i));
++
++				if(ret == _FAIL)
++					goto exit;
++			}
++		}
++	}
++#endif
++
++exit:
++	return ret;
++}
++
++static int
++_PageWrite(
++	IN		PADAPTER	Adapter,
++	IN		u32			page,
++	IN		PVOID		buffer,
++	IN		u32			size
++	)
++{
++	u8 value8;
++	u8 u8Page = (u8) (page & 0x07) ;
++
++	value8 = (rtw_read8(Adapter, REG_MCUFWDL+2)& 0xF8 ) | u8Page ;
++	rtw_write8(Adapter, REG_MCUFWDL+2,value8);
++	return _BlockWrite(Adapter,buffer,size);
++}
++
++static VOID
++_FillDummy(
++	u8*		pFwBuf,
++	u32*	pFwLen
++	)
++{
++	u32	FwLen = *pFwLen;
++	u8	remain = (u8)(FwLen%4);
++	remain = (remain==0)?0:(4-remain);
++
++	while(remain>0)
++	{
++		pFwBuf[FwLen] = 0;
++		FwLen++;
++		remain--;
++	}
++
++	*pFwLen = FwLen;
++}
++
++static int
++_WriteFW(
++	IN		PADAPTER		Adapter,
++	IN		PVOID			buffer,
++	IN		u32			size
++	)
++{
++	// Since we need dynamic decide method of dwonload fw, so we call this function to get chip version.
++	// We can remove _ReadChipVersion from ReadAdapterInfo8192C later.
++
++	int ret = _SUCCESS;
++	u32 	pageNums,remainSize ;
++	u32 	page,offset;
++	u8*	bufferPtr = (u8*)buffer;
++
++#ifdef CONFIG_PCI_HCI
++	// 20100120 Joseph: Add for 88CE normal chip. 
++	// Fill in zero to make firmware image to dword alignment.
++//		_FillDummy(bufferPtr, &size);
++#endif
++
++	pageNums = size / MAX_PAGE_SIZE ;		
++	//RT_ASSERT((pageNums <= 4), ("Page numbers should not greater then 4 \n"));			
++	remainSize = size % MAX_PAGE_SIZE;		
++	
++	for(page = 0; page < pageNums;  page++){
++		offset = page *MAX_PAGE_SIZE;
++		ret = _PageWrite(Adapter,page, (bufferPtr+offset),MAX_PAGE_SIZE);			
++		
++		if(ret == _FAIL)
++			goto exit;
++	}
++	if(remainSize){
++		offset = pageNums *MAX_PAGE_SIZE;
++		page = pageNums;
++		ret = _PageWrite(Adapter,page, (bufferPtr+offset),remainSize);
++
++		if(ret == _FAIL)
++			goto exit;
++	}	
++	//RT_TRACE(COMP_INIT, DBG_LOUD, ("_WriteFW Done- for Normal chip.\n"));
++
++exit:
++	return ret;
++}
++
++static int _FWFreeToGo(
++	IN		PADAPTER		Adapter
++	)
++{
++	u32			counter = 0;
++	u32			value32;
++	u32	restarted = _FALSE;
++	
++	// polling CheckSum report
++	do{
++		value32 = rtw_read32(Adapter, REG_MCUFWDL);
++	}while((counter ++ < POLLING_READY_TIMEOUT_COUNT) && (!(value32 & FWDL_ChkSum_rpt)));	
++
++	if(counter >= POLLING_READY_TIMEOUT_COUNT){	
++		DBG_8192C("chksum report faill ! REG_MCUFWDL:0x%08x\n",value32);
++		return _FAIL;
++	} else {
++		//DBG_8192C("chksum report success ! REG_MCUFWDL:0x%08x, counter:%u\n",value32, counter);
++	}
++	//RT_TRACE(COMP_INIT, DBG_LOUD, ("Checksum report OK ! REG_MCUFWDL:0x%08x .\n",value32));
++
++
++	value32 = rtw_read32(Adapter, REG_MCUFWDL);
++	value32 |= MCUFWDL_RDY;
++	value32 &= ~WINTINI_RDY;
++	rtw_write32(Adapter, REG_MCUFWDL, value32);
++	
++
++POLLING_FW_READY:	
++	// polling for FW ready
++	counter = 0;
++	do
++	{
++		if(rtw_read32(Adapter, REG_MCUFWDL) & WINTINI_RDY){
++			//RT_TRACE(COMP_INIT, DBG_SERIOUS, ("Polling FW ready success!! REG_MCUFWDL:0x%08x .\n",PlatformIORead4Byte(Adapter, REG_MCUFWDL)) );
++			return _SUCCESS;
++		}
++		rtw_udelay_os(5);
++	}while(counter++ < POLLING_READY_TIMEOUT_COUNT);
++
++	DBG_8192C("Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n", rtw_read32(Adapter, REG_MCUFWDL));
++
++	if(restarted == _FALSE) {
++		u8 tmp = rtw_read8(Adapter, REG_SYS_FUNC_EN+1);
++		DBG_8192C("Reset 51 write8 REG_SYS_FUNC_EN:0x%04x\n", tmp & ~BIT2);
++		rtw_write8(Adapter, REG_SYS_FUNC_EN+1, tmp & ~BIT2);
++		DBG_8192C("Reset 51 write8 REG_SYS_FUNC_EN:0x%04x\n", tmp|BIT2);
++		rtw_write8(Adapter, REG_SYS_FUNC_EN+1, tmp|BIT2);
++		restarted = _TRUE;
++		goto POLLING_FW_READY;
++	}
++		
++	
++	return _FAIL;
++	
++}
++
++
++VOID
++rtl8192c_FirmwareSelfReset(
++	IN		PADAPTER		Adapter
++)
++{
++	u8	u1bTmp;
++	u8	Delay = 100;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++		
++	if((pHalData->FirmwareVersion > 0x21) ||
++		(pHalData->FirmwareVersion == 0x21 &&
++		pHalData->FirmwareSubVersion >= 0x01)) // after 88C Fw v33.1
++	{
++		//0x1cf=0x20. Inform 8051 to reset. 2009.12.25. tynli_test
++		rtw_write8(Adapter, REG_HMETFR+3, 0x20);
++	
++		u1bTmp = rtw_read8(Adapter, REG_SYS_FUNC_EN+1);
++		while(u1bTmp&BIT2)
++		{
++			Delay--;
++			if(Delay == 0)
++				break;
++			rtw_udelay_os(50);
++			u1bTmp = rtw_read8(Adapter, REG_SYS_FUNC_EN+1);
++		}
++
++		if((u1bTmp&BIT2) && (Delay == 0))
++		{
++			DBG_8192C("FirmwareDownload92C():fw reset by itself Fail!!!!!! 0x03 = %x\n", u1bTmp);
++			//RT_ASSERT(FALSE, ("PowerOffAdapter8192CE(): 0x03 = %x\n", u1bTmp));
++			#ifdef DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE
++			{
++				u8 val;
++				if( (val=rtw_read8(Adapter, REG_MCUFWDL)))
++					DBG_871X("DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE %s:%d REG_MCUFWDL:0x%02x\n", __FUNCTION__, __LINE__, val);
++			}
++			#endif
++			rtw_write8(Adapter,REG_SYS_FUNC_EN+1,(rtw_read8(Adapter, REG_SYS_FUNC_EN+1)&~BIT2));
++		}
++
++		DBG_8192C("%s =====> 8051 reset success (%d) .\n", __FUNCTION__ ,Delay);
++	}
++}
++
++#ifdef CONFIG_FILE_FWIMG
++extern char *rtw_fw_file_path;
++u8	FwBuffer8192C[FW_8192C_SIZE];
++#endif //CONFIG_FILE_FWIMG
++//
++//	Description:
++//		Download 8192C firmware code.
++//
++//
++int FirmwareDownload92C(
++	IN	PADAPTER			Adapter,
++	IN	BOOLEAN			bUsedWoWLANFw
++)
++{	
++	int	rtStatus = _SUCCESS;	
++	u8 writeFW_retry = 0;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	s8 			R92CFwImageFileName_TSMC[] ={RTL8192C_FW_TSMC_IMG};
++	s8 			R92CFwImageFileName_UMC[] ={RTL8192C_FW_UMC_IMG};
++	s8 			R92CFwImageFileName_UMC_B[] ={RTL8192C_FW_UMC_B_IMG};
++#ifdef CONFIG_WOWLAN
++	s8 			R92CFwImageFileName_TSMC_WW[] ={RTL8192C_FW_TSMC_WW_IMG};
++	s8 			R92CFwImageFileName_UMC_WW[] ={RTL8192C_FW_UMC_WW_IMG};
++	s8 			R92CFwImageFileName_UMC_B_WW[] ={RTL8192C_FW_UMC_B_WW_IMG};
++#endif //CONFIG_WOWLAN
++	
++	//s8 			R8723FwImageFileName_UMC[] ={RTL8723_FW_UMC_IMG};
++	u8*			FwImage = NULL;
++	u32			FwImageLen = 0;
++	char*		pFwImageFileName;	
++#ifdef CONFIG_WOWLAN
++	u8*			FwImageWoWLAN;
++	u32			FwImageWoWLANLen;
++	char*		pFwImageFileName_WoWLAN;
++#endif	//CONFIG_WOWLAN
++	u8*			pucMappedFile = NULL;
++	//vivi, merge 92c and 92s into one driver, 20090817
++	//vivi modify this temply, consider it later!!!!!!!!
++	//PRT_FIRMWARE	pFirmware = GET_FIRMWARE_819X(Adapter);	
++	//PRT_FIRMWARE_92C	pFirmware = GET_FIRMWARE_8192C(Adapter);
++	PRT_FIRMWARE_92C	pFirmware = NULL;
++	PRT_8192C_FIRMWARE_HDR		pFwHdr = NULL;
++	u8		*pFirmwareBuf;
++	u32		FirmwareLen;
++
++	pFirmware = (PRT_FIRMWARE_92C)rtw_zvmalloc(sizeof(RT_FIRMWARE_92C));
++	
++	if(!pFirmware)
++	{
++		rtStatus = _FAIL;
++		goto Exit;
++	}
++
++	if(IS_VENDOR_UMC_A_CUT(pHalData->VersionID) && !IS_92C_SERIAL(pHalData->VersionID))
++	{
++		pFwImageFileName = R92CFwImageFileName_UMC;
++		FwImage = Rtl819XFwUMCACutImageArray;
++		FwImageLen = UMCACutImgArrayLength;
++#ifdef CONFIG_WOWLAN
++		pFwImageFileName_WoWLAN = R92CFwImageFileName_UMC_WW;
++		FwImageWoWLAN= Rtl8192C_FwUMCWWImageArray;
++		FwImageWoWLANLen =UMCACutWWImgArrayLength ;
++#endif	//CONFIG_WOWLAN		
++		DBG_8192C(" ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_UMC\n");
++	}
++	else if(IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID))
++	{
++		// The ROM code of UMC B-cut Fw is the same as TSMC. by tynli. 2011.01.14.
++		pFwImageFileName = R92CFwImageFileName_UMC_B;
++		FwImage = Rtl819XFwUMCBCutImageArray;
++		FwImageLen = UMCBCutImgArrayLength;
++#ifdef CONFIG_WOWLAN
++		pFwImageFileName_WoWLAN = R92CFwImageFileName_UMC_B_WW;
++		FwImageWoWLAN= Rtl8192C_FwUMCBCutWWImageArray;
++		FwImageWoWLANLen =UMCBCutWWImgArrayLength ;
++#endif //CONFIG_WOWLAN
++		
++		DBG_8192C(" ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_UMC_B\n");
++	}
++	else
++	{
++		pFwImageFileName = R92CFwImageFileName_TSMC;
++		FwImage = Rtl819XFwTSMCImageArray;
++		FwImageLen = TSMCImgArrayLength;
++#ifdef CONFIG_WOWLAN
++		pFwImageFileName_WoWLAN = R92CFwImageFileName_TSMC_WW;
++		FwImageWoWLAN= Rtl8192C_FwTSMCWWImageArray;
++		FwImageWoWLANLen =TSMCWWImgArrayLength ;
++#endif //CONFIG_WOWLAN
++		DBG_8192C(" ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC\n");
++	}
++
++	//RT_TRACE(COMP_INIT, DBG_LOUD, (" ===> FirmwareDownload91C() fw:%s\n", pFwImageFileName));
++
++	#ifdef CONFIG_FILE_FWIMG
++	if(rtw_is_file_readable(rtw_fw_file_path) == _TRUE)
++	{
++		DBG_871X("%s accquire FW from file:%s\n", __FUNCTION__, rtw_fw_file_path);
++		pFirmware->eFWSource = FW_SOURCE_IMG_FILE; // We should decided by Reg.
++	}
++	else
++	#endif //CONFIG_FILE_FWIMG
++	{
++		DBG_871X("%s accquire FW from embedded image\n", __FUNCTION__);
++		pFirmware->eFWSource = FW_SOURCE_HEADER_FILE;
++	}
++
++
++	switch(pFirmware->eFWSource)
++	{
++		case FW_SOURCE_IMG_FILE:
++			
++			#ifdef CONFIG_FILE_FWIMG
++			rtStatus = rtw_retrive_from_file(rtw_fw_file_path, FwBuffer8192C, FW_8192C_SIZE);
++			pFirmware->ulFwLength = rtStatus>=0?rtStatus:0;
++			pFirmware->szFwBuffer = FwBuffer8192C;
++			#endif //CONFIG_FILE_FWIMG
++
++			if(pFirmware->ulFwLength <= 0)
++			{
++				rtStatus = _FAIL;
++				goto Exit;
++			}
++			break;
++		case FW_SOURCE_HEADER_FILE:
++			if(FwImageLen > FW_8192C_SIZE){
++				rtStatus = _FAIL;
++				//RT_TRACE(COMP_INIT, DBG_SERIOUS, ("Firmware size exceed 0x%X. Check it.\n", FW_8192C_SIZE) );
++				DBG_871X("Firmware size exceed 0x%X. Check it.\n", FW_8192C_SIZE);
++				goto Exit;
++			}
++
++			pFirmware->szFwBuffer = FwImage;
++			pFirmware->ulFwLength = FwImageLen;
++#ifdef CONFIG_WOWLAN
++			{
++				pFirmware->szWoWLANFwBuffer=FwImageWoWLAN;
++				pFirmware->ulWoWLANFwLength = FwImageWoWLANLen;
++			}
++#endif //CONFIG_WOWLAN
++			
++			break;
++	}
++
++#ifdef CONFIG_WOWLAN	
++	if(bUsedWoWLANFw)	{		
++		pFirmwareBuf = pFirmware->szWoWLANFwBuffer;		
++		FirmwareLen = pFirmware->ulWoWLANFwLength;		
++		pFwHdr = (PRT_8192C_FIRMWARE_HDR)pFirmware->szWoWLANFwBuffer;	
++	}	
++	else
++#endif	//CONFIG_WOWLAN
++	{	
++	#ifdef DBG_FW_STORE_FILE_PATH //used to store firmware to file...
++	if(pFirmware->ulFwLength > 0)
++	{
++		rtw_store_to_file(DBG_FW_STORE_FILE_PATH, pFirmware->szFwBuffer, pFirmware->ulFwLength);
++	}
++	#endif
++
++	pFirmwareBuf = pFirmware->szFwBuffer;
++	FirmwareLen = pFirmware->ulFwLength;
++
++	// To Check Fw header. Added by tynli. 2009.12.04.
++	pFwHdr = (PRT_8192C_FIRMWARE_HDR)pFirmware->szFwBuffer;
++	}
++	pHalData->FirmwareVersion =  le16_to_cpu(pFwHdr->Version); 
++	pHalData->FirmwareSubVersion = le16_to_cpu(pFwHdr->Subversion); 
++
++	//RT_TRACE(COMP_INIT, DBG_LOUD, (" FirmwareVersion(%#x), Signature(%#x)\n", 
++	//	Adapter->MgntInfo.FirmwareVersion, pFwHdr->Signature));
++
++	DBG_8192C("fw_ver=v%d, fw_subver=%d, sig=0x%x\n", 
++		pHalData->FirmwareVersion, pHalData->FirmwareSubVersion, le16_to_cpu(pFwHdr->Signature)&0xFFF0);
++
++	if(IS_FW_HEADER_EXIST(pFwHdr))
++	{
++		//RT_TRACE(COMP_INIT, DBG_LOUD,("Shift 32 bytes for FW header!!\n"));
++		pFirmwareBuf = pFirmwareBuf + 32;
++		FirmwareLen = FirmwareLen -32;
++	}
++		
++	// Suggested by Filen. If 8051 is running in RAM code, driver should inform Fw to reset by itself,
++	// or it will cause download Fw fail. 2010.02.01. by tynli.
++	if(rtw_read8(Adapter, REG_MCUFWDL)&BIT7) //8051 RAM code
++	{	
++		rtl8192c_FirmwareSelfReset(Adapter);
++		rtw_write8(Adapter, REG_MCUFWDL, 0x00);		
++	}
++
++		
++	_FWDownloadEnable(Adapter, _TRUE);
++	while(1) {
++		u8 tmp8;
++		tmp8 = rtw_read8(Adapter, REG_MCUFWDL);
++		
++		//reset the FWDL chksum
++		rtw_write8(Adapter, REG_MCUFWDL, tmp8|FWDL_ChkSum_rpt);
++		
++		//tmp8 = rtw_read8(Adapter, REG_MCUFWDL);
++		//DBG_8192C("Before _WriteFW, REG_MCUFWDL:0x%02x, writeFW_retry:%u\n", tmp8, writeFW_retry);
++		
++		rtStatus = _WriteFW(Adapter, pFirmwareBuf, FirmwareLen);
++		
++		//tmp8 = rtw_read8(Adapter, REG_MCUFWDL);
++		//DBG_8192C("After _WriteFW, REG_MCUFWDL:0x%02x, rtStatus:%d\n", tmp8, rtStatus);
++
++		if(rtStatus == _SUCCESS || ++writeFW_retry>3)
++			break;
++	} 
++	_FWDownloadEnable(Adapter, _FALSE);
++
++	if(_SUCCESS != rtStatus){
++		DBG_8192C("DL Firmware failed!\n");
++		goto Exit;
++	}
++
++	rtStatus = _FWFreeToGo(Adapter);
++	if(_SUCCESS != rtStatus){
++		DBG_8192C("DL Firmware failed!\n");
++		goto Exit;
++	}	
++	//RT_TRACE(COMP_INIT, DBG_LOUD, (" Firmware is ready to run!\n"));
++
++Exit:
++
++	if(pFirmware) {
++		rtw_vmfree((u8*)pFirmware, sizeof(RT_FIRMWARE_92C));
++	}
++
++	//RT_TRACE(COMP_INIT, DBG_LOUD, (" <=== FirmwareDownload91C()\n"));
++	return rtStatus;
++
++}
++
++VOID
++InitializeFirmwareVars92C(
++	IN	PADAPTER		Adapter
++)
++{
++	HAL_DATA_TYPE		*pHalData	= GET_HAL_DATA(Adapter);
++
++	// Init Fw LPS related.
++	Adapter->pwrctrlpriv.bFwCurrentInPSMode = _FALSE;
++
++	//Init H2C counter. by tynli. 2009.12.09.
++	pHalData->LastHMEBoxNum = 0;
++}
++
++#ifdef CONFIG_WOWLAN
++//===========================================
++
++//
++// Description: Prepare some information to Fw for WoWLAN.
++//			(1) Download wowlan Fw.
++//			(2) Download RSVD page packets.
++//			(3) Enable AP offload if needed.
++//
++// 2011.04.12 by tynli.
++//
++VOID
++SetFwRelatedForWoWLAN8192CU(
++	IN	PADAPTER			padapter,
++	IN	u8			bHostIsGoingtoSleep
++)
++{	
++	int	status=_FAIL;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++	u8	 bRecover = _FALSE;
++	
++	if(bHostIsGoingtoSleep)
++	{
++		//
++		// 1. Before WoWLAN we need to re-download WoWLAN Fw.
++		//
++		status = FirmwareDownload92C(padapter, bHostIsGoingtoSleep);
++		if(status != _SUCCESS)
++		{
++			DBG_8192C("ConfigFwRelatedForWoWLAN8192CU(): Re-Download Firmware failed!!\n");
++			return;
++		}
++		else
++		{
++			DBG_8192C("ConfigFwRelatedForWoWLAN8192CU(): Re-Download Firmware Success !!\n");
++		}
++
++		//
++		// 2. Re-Init the variables about Fw related setting.
++		//
++		InitializeFirmwareVars92C(padapter);
++
++		
++	}
++}
++#endif // CONFIG_WOWLAN
++
++#ifdef CONFIG_BT_COEXIST
++static void _update_bt_param(_adapter *padapter)
++{
++	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(padapter);
++	struct btcoexist_priv	*pbtpriv = &(pHalData->bt_coexist);
++	struct registry_priv	*registry_par = &padapter->registrypriv;
++
++	if(2 != registry_par->bt_iso)
++		pbtpriv->BT_Ant_isolation = registry_par->bt_iso;// 0:Low, 1:High, 2:From Efuse
++
++	if(registry_par->bt_sco == 1) // 0:Idle, 1:None-SCO, 2:SCO, 3:From Counter, 4.Busy, 5.OtherBusy
++		pbtpriv->BT_Service = BT_OtherAction;
++	else if(registry_par->bt_sco==2)
++		pbtpriv->BT_Service = BT_SCO;
++	else if(registry_par->bt_sco==4)
++		pbtpriv->BT_Service = BT_Busy;
++	else if(registry_par->bt_sco==5)
++		pbtpriv->BT_Service = BT_OtherBusy;		
++	else
++		pbtpriv->BT_Service = BT_Idle;
++
++	pbtpriv->BT_Ampdu = registry_par->bt_ampdu;
++	pbtpriv->bCOBT = _TRUE;
++#if 1
++	DBG_8192C("BT Coexistance = %s\n", (pbtpriv->BT_Coexist==_TRUE)?"enable":"disable");
++	if(pbtpriv->BT_Coexist)
++	{
++		if(pbtpriv->BT_Ant_Num == Ant_x2)
++		{
++			DBG_8192C("BlueTooth BT_Ant_Num = Antx2\n");
++		}
++		else if(pbtpriv->BT_Ant_Num == Ant_x1)
++		{
++			DBG_8192C("BlueTooth BT_Ant_Num = Antx1\n");
++		}
++		switch(pbtpriv->BT_CoexistType)
++		{
++			case BT_2Wire:
++				DBG_8192C("BlueTooth BT_CoexistType = BT_2Wire\n");
++				break;
++			case BT_ISSC_3Wire:
++				DBG_8192C("BlueTooth BT_CoexistType = BT_ISSC_3Wire\n");
++				break;
++			case BT_Accel:
++				DBG_8192C("BlueTooth BT_CoexistType = BT_Accel\n");
++				break;
++			case BT_CSR_BC4:
++				DBG_8192C("BlueTooth BT_CoexistType = BT_CSR_BC4\n");
++				break;
++			case BT_RTL8756:
++				DBG_8192C("BlueTooth BT_CoexistType = BT_RTL8756\n");
++				break;
++			default:
++				DBG_8192C("BlueTooth BT_CoexistType = Unknown\n");
++				break;
++		}
++		DBG_8192C("BlueTooth BT_Ant_isolation = %d\n", pbtpriv->BT_Ant_isolation);
++
++
++		switch(pbtpriv->BT_Service)
++		{
++			case BT_OtherAction:
++				DBG_8192C("BlueTooth BT_Service = BT_OtherAction\n");
++				break;
++			case BT_SCO:
++				DBG_8192C("BlueTooth BT_Service = BT_SCO\n");
++				break;
++			case BT_Busy:
++				DBG_8192C("BlueTooth BT_Service = BT_Busy\n");
++				break;
++			case BT_OtherBusy:
++				DBG_8192C("BlueTooth BT_Service = BT_OtherBusy\n");
++				break;			
++			default:
++				DBG_8192C("BlueTooth BT_Service = BT_Idle\n");
++				break;
++		}
++
++		DBG_8192C("BT_RadioSharedType = 0x%x\n", pbtpriv->BT_RadioSharedType);
++	}
++#endif
++
++}
++
++
++#define GET_BT_COEXIST(priv) (&priv->bt_coexist)
++
++void rtl8192c_ReadBluetoothCoexistInfo(
++	IN	PADAPTER	Adapter,	
++	IN	u8*		PROMContent,
++	IN	BOOLEAN		AutoloadFail
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	struct btcoexist_priv	*pbtpriv = &(pHalData->bt_coexist);
++	u8	rf_opt4;
++
++	if(AutoloadFail){
++		pbtpriv->BT_Coexist = _FALSE;
++		pbtpriv->BT_CoexistType= BT_2Wire;
++		pbtpriv->BT_Ant_Num = Ant_x2;
++		pbtpriv->BT_Ant_isolation= 0;
++		pbtpriv->BT_RadioSharedType = BT_Radio_Shared;		
++		return;
++	}
++
++	pbtpriv->BT_Coexist = (((PROMContent[EEPROM_RF_OPT1]&BOARD_TYPE_NORMAL_MASK)>>5) == BOARD_USB_COMBO)?_TRUE:_FALSE;	// bit [7:5]
++	rf_opt4 = PROMContent[EEPROM_RF_OPT4];
++	pbtpriv->BT_CoexistType 		= ((rf_opt4&0xe)>>1);			// bit [3:1]
++	pbtpriv->BT_Ant_Num 		= (rf_opt4&0x1);				// bit [0]
++	pbtpriv->BT_Ant_isolation 	= ((rf_opt4&0x10)>>4);			// bit [4]
++	pbtpriv->BT_RadioSharedType 	= ((rf_opt4&0x20)>>5);			// bit [5]
++
++	_update_bt_param(Adapter);
++
++}
++#endif
++
++VERSION_8192C
++rtl8192c_ReadChipVersion(
++	IN	PADAPTER	Adapter
++	)
++{
++	u32			value32;
++	//VERSION_8192C	version;
++	u32			ChipVersion=0;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++
++	value32 = rtw_read32(Adapter, REG_SYS_CFG);
++
++	if (value32 & TRP_VAUX_EN)
++	{
++#if 0
++		// Test chip.
++		if(IS_HARDWARE_TYPE_8723A(Adapter)) {
++			ChipVersion |= ((value32 & VENDOR_ID) ? CHIP_VENDOR_UMC : 0);
++			ChipVersion |= ((value32 & BT_FUNC) ? CHIP_8723: 0); // RTL8723 with BT function.			
++		}
++		else	 {
++		version = (value32 & TYPE_ID) ?VERSION_TEST_CHIP_92C :VERSION_TEST_CHIP_88C;		
++	}
++#else
++		// tynli_test. 2011.01.10.
++		if(IS_HARDWARE_TYPE_8192C(Adapter))
++		{
++			ChipVersion = (value32 & TYPE_ID) ? VERSION_TEST_CHIP_92C : VERSION_TEST_CHIP_88C;						
++		}
++		else
++		{
++			ChipVersion |= ((value32 & VENDOR_ID) ? CHIP_VENDOR_UMC : 0);
++			ChipVersion |= ((value32 & BT_FUNC) ? CHIP_8723: 0); // RTL8723 with BT function.			
++		}
++#endif
++	}
++	else
++	{
++#if 0
++		// Normal mass production chip.
++		ChipVersion = NORMAL_CHIP;
++#if !RTL8723_FPGA_TRUE_PHY_VERIFICATION
++		ChipVersion |= ((value32 & TYPE_ID) ? CHIP_92C : 0);
++#endif
++		ChipVersion |= ((value32 & VENDOR_ID) ? CHIP_VENDOR_UMC : 0);
++		ChipVersion |= ((value32 & BT_FUNC) ? CHIP_8723: 0); // RTL8723 with BT function.
++		if(IS_8723_SERIES(ChipVersion))
++		{
++			if(IS_VENDOR_UMC(ChipVersion))
++				ChipVersion |= ((value32 & CHIP_VER_RTL_MASK) ? CHIP_VENDOR_UMC_B_CUT : 0);
++		}
++		else
++		{
++			// Mark out by tynli. UMC B-cut IC will not set the SYS_CFG[19] to UMC
++			// because we do not want the custmor to know. 2011.01.11.
++			//if(IS_VENDOR_UMC(ChipVersion))
++			{
++				// To check the value of B-cut. by tynli. 2011.01.11.
++				u1bTmp = (u1Byte)((value32 & CHIP_VER_RTL_MASK)>>12);
++				if(u1bTmp == 1)
++				{	// B-cut
++					ChipVersion |= CHIP_VENDOR_UMC_B_CUT;
++				}
++			}
++		}
++#else
++		// Normal mass production chip.
++		ChipVersion = NORMAL_CHIP;
++//#if !RTL8723_FPGA_TRUE_PHY_VERIFICATION
++		ChipVersion |= ((value32 & TYPE_ID) ? RF_TYPE_2T2R : 0); //92c
++//#endif
++		ChipVersion |= ((value32 & VENDOR_ID) ? CHIP_VENDOR_UMC : 0);
++		ChipVersion |= ((value32 & BT_FUNC) ? CHIP_8723: 0); // RTL8723 with BT function.
++		if(IS_HARDWARE_TYPE_8192C(Adapter))
++		{
++			// 88/92C UMC B-cut IC will not set the SYS_CFG[19] to UMC
++			// because we do not want the custmor to know. by tynli. 2011.01.17.
++			//MSG_8192C("mask result = 0x%x is_UMC %d chipversion 0x%x\n", (value32 & CHIP_VER_RTL_MASK), IS_CHIP_VENDOR_UMC(ChipVersion), ChipVersion);
++			if((!IS_CHIP_VENDOR_UMC(ChipVersion) )&& (value32 & CHIP_VER_RTL_MASK))
++			{
++				//MSG_8192C("chip mask result = 0x%x\n", ((value32 & CHIP_VER_RTL_MASK) | CHIP_VENDOR_UMC));
++				ChipVersion |= ((value32 & CHIP_VER_RTL_MASK) | CHIP_VENDOR_UMC); // IC version (CUT)
++				//MSG_8192C("chip version = 0x%x\n", ChipVersion);
++			}
++		}
++		else
++		{
++			if(IS_CHIP_VENDOR_UMC(ChipVersion))
++				ChipVersion |= ((value32 & CHIP_VER_RTL_MASK)); // IC version (CUT)
++		}
++
++		if(IS_92C_SERIAL(ChipVersion))
++		{
++			value32 = rtw_read32(Adapter, REG_HPON_FSM);
++			ChipVersion |= ((CHIP_BONDING_IDENTIFIER(value32) == CHIP_BONDING_92C_1T2R) ? RF_TYPE_1T2R : 0);			
++		}
++		else if(IS_8723_SERIES(ChipVersion))
++		{
++			//RT_ASSERT(IS_HARDWARE_TYPE_8723A(Adapter), ("Incorrect chip version!!\n"));
++			value32 = rtw_read32(Adapter, REG_GPIO_OUTSTS);
++			ChipVersion |= ((value32 & RF_RL_ID)>>20);	 //ROM code version.	
++		}
++#endif
++
++	}
++
++	//version = (VERSION_8192C)ChipVersion;
++
++	// For multi-function consideration. Added by Roger, 2010.10.06.
++	if(IS_8723_SERIES(ChipVersion))
++	{
++		pHalData->MultiFunc = RT_MULTI_FUNC_NONE;
++		value32 = rtw_read32(Adapter, REG_MULTI_FUNC_CTRL);
++		pHalData->MultiFunc =(RT_MULTI_FUNC) (pHalData->MultiFunc| ((value32 & WL_FUNC_EN) ?  RT_MULTI_FUNC_WIFI : 0) );
++		pHalData->MultiFunc =(RT_MULTI_FUNC) (pHalData->MultiFunc| ((value32 & BT_FUNC_EN) ?  RT_MULTI_FUNC_BT : 0) );
++		pHalData->MultiFunc =(RT_MULTI_FUNC) (pHalData->MultiFunc| ((value32 & GPS_FUNC_EN) ?  RT_MULTI_FUNC_GPS : 0) );
++		pHalData->PolarityCtl = ((value32 & WL_HWPDN_SL) ?  RT_POLARITY_HIGH_ACT : RT_POLARITY_LOW_ACT);
++		//MSG_8192C("ReadChipVersion(): MultiFunc(%x), PolarityCtl(%x) \n", pHalData->MultiFunc, pHalData->PolarityCtl);
++
++		//For regulator mode. by tynli. 2011.01.14
++		pHalData->RegulatorMode = ((value32 & TRP_BT_EN) ? RT_LDO_REGULATOR : RT_SWITCHING_REGULATOR);
++		//MSG_8192C("ReadChipVersion(): RegulatorMode(%x) \n", pHalData->RegulatorMode);
++	}
++
++//#if DBG
++#if 1
++	switch(ChipVersion)
++	{
++		case VERSION_NORMAL_TSMC_CHIP_92C_1T2R:
++			MSG_8192C("Chip Version ID: VERSION_NORMAL_TSMC_CHIP_92C_1T2R.\n");
++			break;
++		case VERSION_NORMAL_TSMC_CHIP_92C:
++			MSG_8192C("Chip Version ID: VERSION_NORMAL_TSMC_CHIP_92C.\n");
++			break;
++		case VERSION_NORMAL_TSMC_CHIP_88C:
++			MSG_8192C("Chip Version ID: VERSION_NORMAL_TSMC_CHIP_88C.\n");
++			break;
++		case VERSION_NORMAL_UMC_CHIP_92C_1T2R_A_CUT:
++			MSG_8192C("Chip Version ID: VERSION_NORMAL_UMC_CHIP_92C_1T2R_A_CUT.\n");
++			break;
++		case VERSION_NORMAL_UMC_CHIP_92C_A_CUT:
++			MSG_8192C("Chip Version ID: VERSION_NORMAL_UMC_CHIP_92C_A_CUT.\n");
++			break;
++		case VERSION_NORMAL_UMC_CHIP_88C_A_CUT:
++			MSG_8192C("Chip Version ID: VERSION_NORMAL_UMC_CHIP_88C_A_CUT.\n");
++			break;			
++		case VERSION_NORMAL_UMC_CHIP_92C_1T2R_B_CUT:
++			MSG_8192C("Chip Version ID: VERSION_NORMAL_UMC_CHIP_92C_1T2R_B_CUT.\n");
++			break;
++		case VERSION_NORMAL_UMC_CHIP_92C_B_CUT:
++			MSG_8192C("Chip Version ID: VERSION_NORMAL_UMC_CHIP_92C_B_CUT.\n");
++			break;
++		case VERSION_NORMAL_UMC_CHIP_88C_B_CUT:
++			MSG_8192C("Chip Version ID: VERSION_NORMAL_UMC_CHIP_88C_B_CUT.\n");
++			break;
++		case VERSION_TEST_CHIP_92C:
++			MSG_8192C("Chip Version ID: VERSION_TEST_CHIP_92C.\n");
++			break;
++		case VERSION_TEST_CHIP_88C:
++			MSG_8192C("Chip Version ID: VERSION_TEST_CHIP_88C.\n");
++			break;
++		case VERSION_TEST_UMC_CHIP_8723:
++			MSG_8192C("Chip Version ID: VERSION_TEST_UMC_CHIP_8723.\n");
++			break;
++		case VERSION_NORMAL_UMC_CHIP_8723_1T1R_A_CUT:
++			MSG_8192C("Chip Version ID: VERSION_NORMA_UMC_CHIP_8723_1T1R_A_CUT.\n");
++			break;
++		case VERSION_NORMAL_UMC_CHIP_8723_1T1R_B_CUT:
++			MSG_8192C("Chip Version ID: VERSION_NORMA_UMC_CHIP_8723_1T1R_B_CUT.\n");
++			break;			
++		default:
++			MSG_8192C("Chip Version ID: ???????????????.\n");
++			break;
++	}
++#endif
++
++	pHalData->VersionID = ChipVersion;
++
++	if(IS_1T2R(ChipVersion))
++		pHalData->rf_type = RF_1T2R;
++	else if(IS_2T2R(ChipVersion))
++		pHalData->rf_type = RF_2T2R;
++	else if(IS_8723_SERIES(ChipVersion))
++		pHalData->rf_type = RF_1T1R;
++	else
++		pHalData->rf_type = RF_1T1R;
++
++	MSG_8192C("RF_Type is %x!!\n", pHalData->rf_type);
++
++	return ChipVersion;
++}
++
++void
++rtl8192c_EfuseParseChnlPlan(
++	IN	PADAPTER		padapter,
++	IN	u8*			hwinfo,
++	IN	BOOLEAN			AutoLoadFail
++	)
++{
++	padapter->mlmepriv.ChannelPlan = hal_com_get_channel_plan(
++		padapter
++		, hwinfo?hwinfo[EEPROM_CHANNEL_PLAN]:0xFF
++		, padapter->registrypriv.channel_plan
++		, RT_CHANNEL_DOMAIN_WORLD_WIDE_13
++		, AutoLoadFail
++	);
++
++	DBG_871X("mlmepriv.ChannelPlan = 0x%02x\n", padapter->mlmepriv.ChannelPlan);
++}
++
++u8 GetEEPROMSize8192C(PADAPTER Adapter)
++{
++	u8	size = 0;
++	u32	curRCR;
++
++	curRCR = rtw_read16(Adapter, REG_9346CR);
++	size = (curRCR & BOOT_FROM_EEPROM) ? 6 : 4; // 6: EEPROM used is 93C46, 4: boot from E-Fuse.
++	
++	MSG_8192C("EEPROM type is %s\n", size==4 ? "E-FUSE" : "93C46");
++	
++	return size;
++}
++
++void rtl8192c_free_hal_data(_adapter * padapter)
++{
++_func_enter_;
++
++	DBG_8192C("=====> rtl8192c_free_hal_data =====\n");
++
++	if(padapter->HalData)
++		rtw_mfree(padapter->HalData, sizeof(HAL_DATA_TYPE));
++	DBG_8192C("<===== rtl8192c_free_hal_data =====\n");
++
++_func_exit_;
++}
++
++//===========================================================
++//				Efuse related code
++//===========================================================
++enum{
++		VOLTAGE_V25						= 0x03,
++		LDOE25_SHIFT						= 28 ,
++	};
++
++static VOID
++hal_EfusePowerSwitch_RTL8192C(
++	IN	PADAPTER	pAdapter,
++	IN	u8		bWrite,
++	IN	u8		PwrState)
++{
++	u8	tempval;
++	u16	tmpV16;
++
++	if (PwrState == _TRUE)
++	{
++		// 1.2V Power: From VDDON with Power Cut(0x0000h[15]), defualt valid
++		tmpV16 = rtw_read16(pAdapter,REG_SYS_ISO_CTRL);
++		if( ! (tmpV16 & PWC_EV12V ) ){
++			tmpV16 |= PWC_EV12V ;
++			rtw_write16(pAdapter,REG_SYS_ISO_CTRL,tmpV16);
++		}
++		// Reset: 0x0000h[28], default valid
++		tmpV16 =  rtw_read16(pAdapter,REG_SYS_FUNC_EN);
++		if( !(tmpV16 & FEN_ELDR) ){
++			tmpV16 |= FEN_ELDR ;
++			rtw_write16(pAdapter,REG_SYS_FUNC_EN,tmpV16);
++		}
++
++		// Clock: Gated(0x0008h[5]) 8M(0x0008h[1]) clock from ANA, default valid
++		tmpV16 = rtw_read16(pAdapter,REG_SYS_CLKR);
++		if( (!(tmpV16 & LOADER_CLK_EN) )  ||(!(tmpV16 & ANA8M) ) ){
++			tmpV16 |= (LOADER_CLK_EN |ANA8M ) ;
++			rtw_write16(pAdapter,REG_SYS_CLKR,tmpV16);
++		}
++
++		if(bWrite == _TRUE)
++		{
++			// Enable LDO 2.5V before read/write action
++			tempval = rtw_read8(pAdapter, EFUSE_TEST+3);
++			tempval &= 0x0F;
++			tempval |= (VOLTAGE_V25 << 4);
++			rtw_write8(pAdapter, EFUSE_TEST+3, (tempval | 0x80));
++		}
++	}
++	else
++	{
++		if(bWrite == _TRUE){
++			// Disable LDO 2.5V after read/write action
++			tempval = rtw_read8(pAdapter, EFUSE_TEST+3);
++			rtw_write8(pAdapter, EFUSE_TEST+3, (tempval & 0x7F));
++		}
++	}
++}
++
++static VOID
++hal_EfusePowerSwitch_RTL8723(
++	IN	PADAPTER	pAdapter,
++	IN	u8		bWrite,
++	IN	u8		PwrState)
++{
++	u8	tempval;
++	u16	tmpV16;
++
++	if (PwrState == _TRUE)
++	{
++		rtw_write8(pAdapter, REG_EFUSE_ACCESS, EFUSE_ACCESS_ON);	
++
++		// 1.2V Power: From VDDON with Power Cut(0x0000h[15]), defualt valid
++		tmpV16 = rtw_read16(pAdapter,REG_SYS_ISO_CTRL);
++		if( ! (tmpV16 & PWC_EV12V ) ){
++			tmpV16 |= PWC_EV12V ;
++			 rtw_write16(pAdapter,REG_SYS_ISO_CTRL,tmpV16);
++		}
++		// Reset: 0x0000h[28], default valid
++		tmpV16 =  rtw_read16(pAdapter,REG_SYS_FUNC_EN);
++		if( !(tmpV16 & FEN_ELDR) ){
++			tmpV16 |= FEN_ELDR ;
++			rtw_write16(pAdapter,REG_SYS_FUNC_EN,tmpV16);
++		}
++
++		// Clock: Gated(0x0008h[5]) 8M(0x0008h[1]) clock from ANA, default valid
++		tmpV16 = rtw_read16(pAdapter,REG_SYS_CLKR);
++		if( (!(tmpV16 & LOADER_CLK_EN) )  ||(!(tmpV16 & ANA8M) ) ){
++			tmpV16 |= (LOADER_CLK_EN |ANA8M ) ;
++			rtw_write16(pAdapter,REG_SYS_CLKR,tmpV16);
++		}
++
++		if(bWrite == _TRUE)
++		{
++			// Enable LDO 2.5V before read/write action
++			tempval = rtw_read8(pAdapter, EFUSE_TEST+3);
++			tempval &= 0x0F;
++			tempval |= (VOLTAGE_V25 << 4);
++			rtw_write8(pAdapter, EFUSE_TEST+3, (tempval | 0x80));
++		}
++	}
++	else
++	{
++		rtw_write8(pAdapter, REG_EFUSE_ACCESS, EFUSE_ACCESS_OFF);
++
++		if(bWrite == _TRUE){
++			// Disable LDO 2.5V after read/write action
++			tempval = rtw_read8(pAdapter, EFUSE_TEST+3);
++			rtw_write8(pAdapter, EFUSE_TEST+3, (tempval & 0x7F));
++		}
++	}	
++}
++
++static VOID
++rtl8192c_EfusePowerSwitch(
++	IN	PADAPTER	pAdapter,
++	IN	u8		bWrite,
++	IN	u8		PwrState)
++{
++	if(IS_HARDWARE_TYPE_8192C(pAdapter))
++	{
++		hal_EfusePowerSwitch_RTL8192C(pAdapter, bWrite, PwrState);
++	}
++	else if(IS_HARDWARE_TYPE_8723A(pAdapter))
++	{
++		hal_EfusePowerSwitch_RTL8723(pAdapter, bWrite, PwrState);
++	}	
++}
++
++static VOID
++ReadEFuse_RTL8192C(
++	PADAPTER	Adapter,
++	u16		 _offset,
++	u16 		_size_byte,
++	u8      	*pbuf,
++	IN	BOOLEAN		bPseudoTest
++	)
++{
++	u8	efuseTbl[EFUSE_MAP_LEN];
++	u8	rtemp8[1];
++	u16 	eFuse_Addr = 0;
++	u8  	offset, wren;
++	u16	i, j;
++	u16	eFuseWord[EFUSE_MAX_SECTION][EFUSE_MAX_WORD_UNIT];
++	u16	efuse_utilized = 0;
++	u8	efuse_usage = 0;
++
++	//
++	// Do NOT excess total size of EFuse table. Added by Roger, 2008.11.10.
++	//
++	if((_offset + _size_byte)>EFUSE_MAP_LEN)
++	{// total E-Fuse table is 128bytes
++		//DBG_8192C("ReadEFuse_RTL8192C(): Invalid offset(%#x) with read bytes(%#x)!!\n",_offset, _size_byte);
++		return;
++	}
++
++	// 0. Refresh efuse init map as all oxFF.
++	for (i = 0; i < EFUSE_MAX_SECTION; i++)
++		for (j = 0; j < EFUSE_MAX_WORD_UNIT; j++)
++			eFuseWord[i][j] = 0xFFFF;
++
++
++	//
++	// 1. Read the first byte to check if efuse is empty!!!
++	// 
++	//
++	ReadEFuseByte(Adapter, eFuse_Addr, rtemp8, bPseudoTest);	
++	if(*rtemp8 != 0xFF)
++	{
++		efuse_utilized++;
++		//RTPRINT(FEEPROM, EFUSE_READ_ALL, ("Addr=%d\n", eFuse_Addr));
++		eFuse_Addr++;
++	}
++
++	//
++	// 2. Read real efuse content. Filter PG header and every section data.
++	//
++	while((*rtemp8 != 0xFF) && (eFuse_Addr < EFUSE_REAL_CONTENT_LEN))
++	{
++		// Check PG header for section num.
++		offset = ((*rtemp8 >> 4) & 0x0f);
++
++		if(offset < EFUSE_MAX_SECTION)
++		{
++			// Get word enable value from PG header
++			wren = (*rtemp8 & 0x0f);
++			//RTPRINT(FEEPROM, EFUSE_READ_ALL, ("Offset-%d Worden=%x\n", offset, wren));
++
++			for(i=0; i<EFUSE_MAX_WORD_UNIT; i++)
++			{
++				// Check word enable condition in the section				
++				if(!(wren & 0x01))
++				{
++					//RTPRINT(FEEPROM, EFUSE_READ_ALL, ("Addr=%d\n", eFuse_Addr));
++					ReadEFuseByte(Adapter, eFuse_Addr, rtemp8, bPseudoTest);	eFuse_Addr++;
++					efuse_utilized++;
++					eFuseWord[offset][i] = (*rtemp8 & 0xff);
++					
++
++					if(eFuse_Addr >= EFUSE_REAL_CONTENT_LEN) 
++						break;
++
++					//RTPRINT(FEEPROM, EFUSE_READ_ALL, ("Addr=%d\n", eFuse_Addr));
++					ReadEFuseByte(Adapter, eFuse_Addr, rtemp8, bPseudoTest);	eFuse_Addr++;
++					efuse_utilized++;
++					eFuseWord[offset][i] |= (((u16)*rtemp8 << 8) & 0xff00);
++
++					if(eFuse_Addr >= EFUSE_REAL_CONTENT_LEN) 
++						break;
++				}
++				
++				wren >>= 1;
++				
++			}
++		}
++
++		//RTPRINT(FEEPROM, EFUSE_READ_ALL, ("Addr=%d\n", eFuse_Addr));
++		// Read next PG header
++		ReadEFuseByte(Adapter, eFuse_Addr, rtemp8, bPseudoTest);	
++		if(*rtemp8 != 0xFF && (eFuse_Addr < 512))
++		{
++			efuse_utilized++;
++			eFuse_Addr++;
++		}
++	}
++
++	//
++	// 3. Collect 16 sections and 4 word unit into Efuse map.
++	//
++	for(i=0; i<EFUSE_MAX_SECTION; i++)
++	{
++		for(j=0; j<EFUSE_MAX_WORD_UNIT; j++)
++		{
++			efuseTbl[(i*8)+(j*2)]=(eFuseWord[i][j] & 0xff);
++			efuseTbl[(i*8)+((j*2)+1)]=((eFuseWord[i][j] >> 8) & 0xff);
++		}
++	}
++
++	//
++	// 4. Copy from Efuse map to output pointer memory!!!
++	//
++	for(i=0; i<_size_byte; i++)
++	{		
++		pbuf[i] = efuseTbl[_offset+i];
++	}
++
++	//
++	// 5. Calculate Efuse utilization.
++	//
++	efuse_usage = (u8)((efuse_utilized*100)/EFUSE_REAL_CONTENT_LEN);
++	rtw_hal_set_hwreg(Adapter, HW_VAR_EFUSE_BYTES, (u8 *)&efuse_utilized);
++	//rtw_hal_set_hwreg(Adapter, HW_VAR_EFUSE_USAGE, (pu1Byte)&efuse_usage);
++}
++
++static VOID
++ReadEFuse_RTL8723(
++	PADAPTER	Adapter,
++	u16		 _offset,
++	u16 		_size_byte,
++	u8      	*pbuf,
++	IN	BOOLEAN		bPseudoTest
++	)
++{
++	u8	efuseTbl[EFUSE_MAP_LEN_8723];
++	u16	eFuse_Addr = 0;
++	u8	offset = 0, wden = 0;
++	u16	i, j;
++	u16	eFuseWord[EFUSE_MAX_SECTION_8723][EFUSE_MAX_WORD_UNIT];
++	u16	efuse_utilized = 0;
++	u8	efuse_usage = 0;
++	u8	offset_2_0=0;
++	u8	efuseHeader=0, efuseExtHdr=0, efuseData=0;
++	//
++	// Do NOT excess total size of EFuse table. Added by Roger, 2008.11.10.
++	//
++	if((_offset + _size_byte)>EFUSE_MAP_LEN_8723)
++	{
++		//RT_TRACE(COMP_EFUSE, DBG_LOUD, ("ReadEFuse_RTL8723(): Invalid offset(%#x) with read bytes(%#x)!!\n",_offset, _size_byte));
++		return;
++	}
++
++	// 0. Refresh efuse init map as all oxFF.
++	for (i = 0; i < EFUSE_MAX_SECTION_8723; i++)
++		for (j = 0; j < EFUSE_MAX_WORD_UNIT; j++)
++			eFuseWord[i][j] = 0xFFFF;
++
++	//
++	// 1. Read the first byte to check if efuse is empty!!!
++	// 
++	//
++	ReadEFuseByte(Adapter, eFuse_Addr++, &efuseHeader, bPseudoTest);
++	
++	if(efuseHeader != 0xFF)
++	{
++		efuse_utilized++;
++	}
++	else
++	{
++		//RTPRINT(FEEPROM, EFUSE_READ_ALL, ("EFUSE is empty\n"));
++		return;
++	}
++
++
++	//
++	// 2. Read real efuse content. Filter PG header and every section data.
++	//
++	while((efuseHeader != 0xFF) && AVAILABLE_EFUSE_ADDR(eFuse_Addr))
++	{
++		//RTPRINT(FEEPROM, EFUSE_READ_ALL, ("efuse[%d]=%x\n", eFuse_Addr-1, efuseHeader));
++	
++		// Check PG header for section num.
++		if(EXT_HEADER(efuseHeader))		//extended header
++		{
++			offset_2_0 = GET_HDR_OFFSET_2_0(efuseHeader);
++			//RTPRINT(FEEPROM, EFUSE_READ_ALL, ("extended header offset_2_0=%x\n", offset_2_0));
++
++			ReadEFuseByte(Adapter, eFuse_Addr++, &efuseExtHdr, bPseudoTest);
++
++			//RTPRINT(FEEPROM, EFUSE_READ_ALL, ("efuse[%d]=%x\n", eFuse_Addr-1, efuseExtHdr));
++
++			if(efuseExtHdr != 0xff)
++			{
++				efuse_utilized++;
++				if(ALL_WORDS_DISABLED(efuseExtHdr))
++				{
++					ReadEFuseByte(Adapter, eFuse_Addr++, &efuseHeader, bPseudoTest);
++					if(efuseHeader != 0xff)
++					{
++						efuse_utilized++;
++					}
++					continue;
++				}
++				else
++				{
++					offset = ((efuseExtHdr & 0xF0) >> 1) | offset_2_0;
++					wden = (efuseExtHdr & 0x0F);
++				}
++			}
++			else
++			{
++				//RTPRINT(FEEPROM, EFUSE_READ_ALL, ("Error condition, extended = 0xff\n"));
++				// We should handle this condition.
++			}
++		}
++		else
++		{
++			offset = ((efuseHeader >> 4) & 0x0f);
++			wden = (efuseHeader & 0x0f);
++		}
++
++		if(offset < EFUSE_MAX_SECTION_8723)
++		{
++			// Get word enable value from PG header
++			//RTPRINT(FEEPROM, EFUSE_READ_ALL, ("Offset-%d Worden=%x\n", offset, wden));
++
++			for(i=0; i<EFUSE_MAX_WORD_UNIT; i++)
++			{
++				// Check word enable condition in the section				
++				if(!(wden & (0x01<<i)))
++				{
++					ReadEFuseByte(Adapter, eFuse_Addr++, &efuseData, bPseudoTest);
++					//RTPRINT(FEEPROM, EFUSE_READ_ALL, ("efuse[%d]=%x\n", eFuse_Addr-1, efuseData));
++					efuse_utilized++;
++					eFuseWord[offset][i] = (efuseData & 0xff);
++
++					if(!AVAILABLE_EFUSE_ADDR(eFuse_Addr))
++						break;
++
++					ReadEFuseByte(Adapter, eFuse_Addr++, &efuseData, bPseudoTest);
++					//RTPRINT(FEEPROM, EFUSE_READ_ALL, ("efuse[%d]=%x\n", eFuse_Addr-1, efuseData));
++					efuse_utilized++;
++					eFuseWord[offset][i] |= (((u16)efuseData << 8) & 0xff00);
++
++					if(!AVAILABLE_EFUSE_ADDR(eFuse_Addr)) 
++						break;
++				}
++			}
++		}
++
++		// Read next PG header
++		ReadEFuseByte(Adapter, eFuse_Addr++, &efuseHeader, bPseudoTest);
++
++		if(efuseHeader != 0xFF)
++		{
++			efuse_utilized++;
++		}
++	}
++
++	//
++	// 3. Collect 16 sections and 4 word unit into Efuse map.
++	//
++	for(i=0; i<EFUSE_MAX_SECTION_8723; i++)
++	{
++		for(j=0; j<EFUSE_MAX_WORD_UNIT; j++)
++		{
++			efuseTbl[(i*8)+(j*2)]=(eFuseWord[i][j] & 0xff);
++			efuseTbl[(i*8)+((j*2)+1)]=((eFuseWord[i][j] >> 8) & 0xff);
++		}
++	}
++
++	//
++	// 4. Copy from Efuse map to output pointer memory!!!
++	//
++	for(i=0; i<_size_byte; i++)
++	{		
++		pbuf[i] = efuseTbl[_offset+i];
++	}
++
++	//
++	// 5. Calculate Efuse utilization.
++	//
++	efuse_usage = (u8)((efuse_utilized*100)/EFUSE_REAL_CONTENT_LEN);
++	rtw_hal_set_hwreg(Adapter, HW_VAR_EFUSE_BYTES, (u8 *)&efuse_utilized);
++	//rtw_hal_set_hwreg(Adapter, HW_VAR_EFUSE_USAGE, (pu1Byte)&efuse_usage);
++}
++
++static BOOLEAN
++Hal_EfuseSwitchToBank(
++	IN		PADAPTER	pAdapter,
++	IN		u8			bank,
++	IN		BOOLEAN		bPseudoTest
++	)
++{
++	BOOLEAN		bRet = _FALSE;
++	u32		value32=0;
++
++	//RTPRINT(FEEPROM, EFUSE_PG, ("Efuse switch bank to %d\n", bank));
++	if(bPseudoTest)
++	{
++		fakeEfuseBank = bank;
++		bRet = _TRUE;
++	}
++	else
++	{
++		if(IS_HARDWARE_TYPE_8723A(pAdapter) && 
++			INCLUDE_MULTI_FUNC_BT(pAdapter))
++		{		
++			value32 = rtw_read32(pAdapter, EFUSE_TEST);
++			bRet = _TRUE;
++			switch(bank)
++			{
++			case 0:
++				value32 = (value32 & ~EFUSE_SEL_MASK) | EFUSE_SEL(EFUSE_WIFI_SEL_0);
++				break;
++			case 1:
++				value32 = (value32 & ~EFUSE_SEL_MASK) | EFUSE_SEL(EFUSE_BT_SEL_0);
++				break;
++			case 2:
++				value32 = (value32 & ~EFUSE_SEL_MASK) | EFUSE_SEL(EFUSE_BT_SEL_1);
++				break;
++			case 3:
++				value32 = (value32 & ~EFUSE_SEL_MASK) | EFUSE_SEL(EFUSE_BT_SEL_2);
++				break;
++			default:
++				value32 = (value32 & ~EFUSE_SEL_MASK) | EFUSE_SEL(EFUSE_WIFI_SEL_0);
++				bRet = _FALSE;
++				break;
++			}
++			rtw_write32(pAdapter, EFUSE_TEST, value32);
++		}
++		else
++			bRet = _TRUE;
++	}
++	return bRet;
++}
++
++static VOID
++ReadEFuse_BT(
++	PADAPTER	Adapter,
++	u16		 _offset,
++	u16 		_size_byte,
++	u8      	*pbuf,
++	IN	BOOLEAN	bPseudoTest
++	)
++{
++	u8  	*efuseTbl;
++	u16 	eFuse_Addr = 0;
++	u8  	offset = 0, wden = 0;
++	u16	i, j;
++	u16 	**eFuseWord;
++	u16	efuse_utilized = 0;
++	u8	efuse_usage = 0;
++	u8	offset_2_0=0;
++	u8	efuseHeader=0, efuseExtHdr=0, efuseData=0;
++	u8	bank=0;
++	BOOLEAN	bCheckNextBank=_FALSE;
++
++	efuseTbl = rtw_malloc(EFUSE_BT_MAP_LEN);
++	if(efuseTbl == NULL){
++		DBG_8192C("efuseTbl malloc fail !\n");
++		return;
++	}
++
++	eFuseWord = (u16 **)rtw_zmalloc(sizeof(u16 *)*EFUSE_BT_MAX_SECTION);
++	if(eFuseWord == NULL){
++		DBG_8192C("eFuseWord malloc fail !\n");
++		return;
++	}
++	else{
++		for(i=0;i<EFUSE_BT_MAX_SECTION;i++){
++			eFuseWord[i]= (u16 *)rtw_zmalloc(sizeof(u16)*EFUSE_MAX_WORD_UNIT);
++			if(eFuseWord[i]==NULL){
++				DBG_8192C("eFuseWord[] malloc fail !\n");
++				return;
++			}
++		}
++	}
++
++	//
++	// Do NOT excess total size of EFuse table. Added by Roger, 2008.11.10.
++	//
++	if((_offset + _size_byte)>EFUSE_BT_MAP_LEN)
++	{
++		//RT_TRACE(COMP_EFUSE, DBG_LOUD, ("ReadEFuse_BT(): Invalid offset(%#x) with read bytes(%#x)!!\n",_offset, _size_byte));
++		return;
++	}
++
++	// 0. Refresh efuse init map as all oxFF.
++	for (i = 0; i < EFUSE_BT_MAX_SECTION; i++)
++		for (j = 0; j < EFUSE_MAX_WORD_UNIT; j++)
++			eFuseWord[i][j] = 0xFFFF;
++
++	for(bank=1; bank<EFUSE_MAX_BANK; bank++)
++	{
++		if(!Hal_EfuseSwitchToBank(Adapter, bank, bPseudoTest))
++		{
++			//RTPRINT(FEEPROM, EFUSE_READ_ALL, ("Hal_EfuseSwitchToBank() Fail!!\n"));
++			return;
++		}
++		eFuse_Addr = 0;
++		//
++		// 1. Read the first byte to check if efuse is empty!!!
++		// 
++		ReadEFuseByte(Adapter, eFuse_Addr++, &efuseHeader, bPseudoTest);
++		
++		if(efuseHeader != 0xFF)
++		{
++			efuse_utilized++;
++		}
++		else
++		{
++			//RTPRINT(FEEPROM, EFUSE_READ_ALL, ("EFUSE is empty\n"));
++			return;
++		}
++		//
++		// 2. Read real efuse content. Filter PG header and every section data.
++		//
++		while((efuseHeader != 0xFF) && AVAILABLE_EFUSE_ADDR(eFuse_Addr))
++		{
++			//RTPRINT(FEEPROM, EFUSE_READ_ALL, ("efuse[%d]=0x%02x (header)\n", (((bank-1)*EFUSE_REAL_CONTENT_LEN)+eFuse_Addr-1), efuseHeader));
++		
++			// Check PG header for section num.
++			if(EXT_HEADER(efuseHeader))		//extended header
++			{
++				offset_2_0 = GET_HDR_OFFSET_2_0(efuseHeader);
++				//RTPRINT(FEEPROM, EFUSE_READ_ALL, ("extended header offset_2_0=%x\n", offset_2_0));
++
++				ReadEFuseByte(Adapter, eFuse_Addr++, &efuseExtHdr, bPseudoTest);
++
++				//RTPRINT(FEEPROM, EFUSE_READ_ALL, ("efuse[%d]=0x%02x (ext header)\n", (((bank-1)*EFUSE_REAL_CONTENT_LEN)+eFuse_Addr-1), efuseExtHdr));
++
++				if(efuseExtHdr != 0xff)
++				{
++					efuse_utilized++;
++					if(ALL_WORDS_DISABLED(efuseExtHdr))
++					{
++						ReadEFuseByte(Adapter, eFuse_Addr++, &efuseHeader, bPseudoTest);
++						if(efuseHeader != 0xff)
++						{
++							efuse_utilized++;
++						}
++						continue;
++					}
++					else
++					{
++						offset = ((efuseExtHdr & 0xF0) >> 1) | offset_2_0;
++						wden = (efuseExtHdr & 0x0F);
++					}
++				}
++				else
++				{
++					//RTPRINT(FEEPROM, EFUSE_READ_ALL, ("Error condition, extended = 0xff\n"));
++					// We should handle this condition.
++				}
++			}
++			else
++			{
++				offset = ((efuseHeader >> 4) & 0x0f);
++				wden = (efuseHeader & 0x0f);
++			}
++
++			if(offset < EFUSE_BT_MAX_SECTION)
++			{
++				// Get word enable value from PG header
++				//RTPRINT(FEEPROM, EFUSE_READ_ALL, ("Offset-%d Worden=%x\n", offset, wden));
++
++				for(i=0; i<EFUSE_MAX_WORD_UNIT; i++)
++				{
++					// Check word enable condition in the section				
++					if(!(wden & (0x01<<i)))
++					{
++						ReadEFuseByte(Adapter, eFuse_Addr++, &efuseData, bPseudoTest);
++						//RTPRINT(FEEPROM, EFUSE_READ_ALL, ("efuse[%d]=0x%02x\n", (((bank-1)*EFUSE_REAL_CONTENT_LEN)+eFuse_Addr-1), efuseData));
++						efuse_utilized++;
++						eFuseWord[offset][i] = (efuseData & 0xff);
++
++						if(!AVAILABLE_EFUSE_ADDR(eFuse_Addr))
++							break;
++
++						ReadEFuseByte(Adapter, eFuse_Addr++, &efuseData, bPseudoTest);
++						//RTPRINT(FEEPROM, EFUSE_READ_ALL, ("efuse[%d]=0x%02x\n", (((bank-1)*EFUSE_REAL_CONTENT_LEN)+eFuse_Addr-1), efuseData));
++						efuse_utilized++;
++						eFuseWord[offset][i] |= (((u16)efuseData << 8) & 0xff00);
++
++						if(!AVAILABLE_EFUSE_ADDR(eFuse_Addr)) 
++							break;
++					}
++				}
++			}
++
++			// Read next PG header
++			ReadEFuseByte(Adapter, eFuse_Addr++, &efuseHeader, bPseudoTest);
++
++			if(efuseHeader != 0xFF)
++			{
++				efuse_utilized++;
++			}
++			else
++			{
++				if((eFuse_Addr + EFUSE_PROTECT_BYTES_BANK) >= EFUSE_REAL_CONTENT_LEN)
++					bCheckNextBank = _TRUE;
++				else
++					bCheckNextBank = _FALSE;
++			}
++		}
++		if(!bCheckNextBank)
++		{
++			//RTPRINT(FEEPROM, EFUSE_READ_ALL, ("Stop to check next bank\n"));
++			break;
++		}
++	}
++
++	// switch bank back to bank 0 for later BT and wifi use.
++	Hal_EfuseSwitchToBank(Adapter, 0, bPseudoTest);
++		
++	//
++	// 3. Collect 16 sections and 4 word unit into Efuse map.
++	//
++	for(i=0; i<EFUSE_BT_MAX_SECTION; i++)
++	{
++		for(j=0; j<EFUSE_MAX_WORD_UNIT; j++)
++		{
++			efuseTbl[(i*8)+(j*2)]=(eFuseWord[i][j] & 0xff);
++			efuseTbl[(i*8)+((j*2)+1)]=((eFuseWord[i][j] >> 8) & 0xff);
++		}
++	}
++
++	//
++	// 4. Copy from Efuse map to output pointer memory!!!
++	//
++	for(i=0; i<_size_byte; i++)
++	{		
++		pbuf[i] = efuseTbl[_offset+i];
++	}
++	
++	//
++	// 5. Calculate Efuse utilization.
++	//
++	efuse_usage = (u8)((efuse_utilized*100)/EFUSE_BT_REAL_CONTENT_LEN);
++	if(bPseudoTest)
++	{
++		fakeBTEfuseUsedBytes =  (EFUSE_REAL_CONTENT_LEN*(bank-1))+eFuse_Addr-1;
++	}
++	else
++	{
++		BTEfuseUsedBytes =  (EFUSE_REAL_CONTENT_LEN*(bank-1))+eFuse_Addr-1;
++	}
++
++	for(i=0;i<EFUSE_BT_MAX_SECTION;i++)
++		rtw_mfree((u8 *)eFuseWord[i], sizeof(u16)*EFUSE_MAX_WORD_UNIT);
++	rtw_mfree((u8 *)eFuseWord, sizeof(u16 *)*EFUSE_BT_MAX_SECTION);
++	rtw_mfree(efuseTbl, EFUSE_BT_MAP_LEN);
++}
++
++
++static VOID
++ReadEFuseByIC(
++	PADAPTER	Adapter,
++	u8		efuseType,
++	u16		 _offset,
++	u16 		_size_byte,
++	u8      	*pbuf,
++	IN BOOLEAN	bPseudoTest
++	)
++{
++	if(efuseType == EFUSE_WIFI)
++	{
++		if(IS_HARDWARE_TYPE_8192C(Adapter))
++		{
++			ReadEFuse_RTL8192C(Adapter, _offset, _size_byte, pbuf, bPseudoTest);
++		}
++		else if(IS_HARDWARE_TYPE_8723A(Adapter))
++		{
++			ReadEFuse_RTL8723(Adapter, _offset, _size_byte, pbuf, bPseudoTest);
++		}
++	}
++	else
++		ReadEFuse_BT(Adapter, _offset, _size_byte, pbuf, bPseudoTest);
++}
++
++static VOID
++ReadEFuse_Pseudo(
++	PADAPTER	Adapter,
++	u8		efuseType,
++	u16		 _offset,
++	u16 		_size_byte,
++	u8      	*pbuf,
++	IN BOOLEAN	bPseudoTest
++	)
++{
++	if(efuseType == EFUSE_WIFI)
++		ReadEFuse_RTL8723(Adapter, _offset, _size_byte, pbuf, bPseudoTest);
++	else
++		ReadEFuse_BT(Adapter, _offset, _size_byte, pbuf, bPseudoTest);
++}
++
++static VOID
++rtl8192c_ReadEFuse(
++	PADAPTER	Adapter,
++	u8		efuseType,
++	u16		_offset,
++	u16 		_size_byte,
++	u8      	*pbuf,
++	IN	BOOLEAN	bPseudoTest
++	)
++{
++	if(bPseudoTest)
++	{
++		ReadEFuse_Pseudo(Adapter, efuseType, _offset, _size_byte, pbuf, bPseudoTest);
++	}
++	else
++	{
++		ReadEFuseByIC(Adapter, efuseType, _offset, _size_byte, pbuf, bPseudoTest);
++	}
++}
++
++static VOID
++Hal_EFUSEGetEfuseDefinition(
++	IN		PADAPTER	pAdapter,
++	IN		u8		efuseType,
++	IN		u8		type,
++	OUT		PVOID		*pOut
++	)
++{
++	switch(type)
++	{
++		case TYPE_EFUSE_MAX_SECTION:
++			{
++				u8	*pMax_section;
++				pMax_section = (u8 *)pOut;
++
++				if(efuseType == EFUSE_WIFI)
++				{
++					if(IS_HARDWARE_TYPE_8192C(pAdapter))
++					{
++						*pMax_section = EFUSE_MAX_SECTION;
++					}
++					else if(IS_HARDWARE_TYPE_8723A(pAdapter))
++					{
++						*pMax_section = EFUSE_MAX_SECTION_8723;
++					}
++				}
++				else
++					*pMax_section = EFUSE_BT_MAX_SECTION;
++			}
++			break;
++		case TYPE_EFUSE_REAL_CONTENT_LEN:
++			{
++				u16 *pu2Tmp;
++				pu2Tmp = (u16 *)pOut;
++				if(efuseType == EFUSE_WIFI)
++					*pu2Tmp = EFUSE_REAL_CONTENT_LEN;
++				else
++					*pu2Tmp = EFUSE_BT_REAL_CONTENT_LEN;
++			}
++			break;
++		case TYPE_AVAILABLE_EFUSE_BYTES_BANK:
++			{
++				u16	*pu2Tmp;
++				pu2Tmp = (u16 *)pOut;
++				if(efuseType == EFUSE_WIFI)
++					*pu2Tmp = (u16)(EFUSE_REAL_CONTENT_LEN-EFUSE_OOB_PROTECT_BYTES);
++				else
++					*pu2Tmp = (u16)(EFUSE_REAL_CONTENT_LEN-EFUSE_PROTECT_BYTES_BANK);
++			}
++			break;
++		case TYPE_AVAILABLE_EFUSE_BYTES_TOTAL:
++			{
++				u16 *pu2Tmp;
++				pu2Tmp = (u16 *)pOut;
++				if(efuseType == EFUSE_WIFI)
++					*pu2Tmp = (u16)(EFUSE_REAL_CONTENT_LEN-EFUSE_OOB_PROTECT_BYTES);
++				else
++					*pu2Tmp = (u16)(EFUSE_BT_REAL_CONTENT_LEN-(EFUSE_PROTECT_BYTES_BANK*3));
++			}
++			break;
++		case TYPE_EFUSE_MAP_LEN:
++			{
++				u16 *pu2Tmp;
++				pu2Tmp = (u16 *)pOut;
++
++				if(efuseType == EFUSE_WIFI)
++				{
++					if(IS_HARDWARE_TYPE_8192C(pAdapter))
++					{
++						*pu2Tmp = (u16)EFUSE_MAP_LEN;
++					}
++					else if(IS_HARDWARE_TYPE_8723A(pAdapter))
++					{
++						*pu2Tmp = (u16)EFUSE_MAP_LEN_8723;
++					}
++				}
++				else
++					*pu2Tmp = (u16)EFUSE_BT_MAP_LEN;
++			}
++			break;
++		case TYPE_EFUSE_PROTECT_BYTES_BANK:
++			{
++				u8 *pu1Tmp;
++				pu1Tmp = (u8 *)pOut;
++				if(efuseType == EFUSE_WIFI)
++					*pu1Tmp = (u8)(EFUSE_OOB_PROTECT_BYTES);
++				else
++					*pu1Tmp = (u8)(EFUSE_PROTECT_BYTES_BANK);
++			}
++			break;
++		default:
++			{
++				u8 *pu1Tmp;
++				pu1Tmp = (u8 *)pOut;
++				*pu1Tmp = 0;
++			}
++			break;
++	}
++}
++
++static VOID
++Hal_EFUSEGetEfuseDefinition_Pseudo(
++	IN		PADAPTER	pAdapter,
++	IN		u8		efuseType,
++	IN		u8		type,
++	OUT		PVOID		*pOut
++	)
++{
++	switch(type)
++	{
++		case TYPE_EFUSE_MAX_SECTION:
++			{
++				u8	*pMax_section;
++				pMax_section = (u8 *)pOut;
++				if(efuseType == EFUSE_WIFI)
++					*pMax_section = EFUSE_MAX_SECTION_8723;
++				else
++					*pMax_section = EFUSE_BT_MAX_SECTION;
++			}
++			break;
++		case TYPE_EFUSE_REAL_CONTENT_LEN:
++			{
++				u16 *pu2Tmp;
++				pu2Tmp = (u16 *)pOut;
++				if(efuseType == EFUSE_WIFI)
++					*pu2Tmp = EFUSE_REAL_CONTENT_LEN;
++				else
++					*pu2Tmp = EFUSE_BT_REAL_CONTENT_LEN;
++			}
++			break;
++		case TYPE_AVAILABLE_EFUSE_BYTES_BANK:
++			{
++				u16 *pu2Tmp;
++				pu2Tmp = (u16 *)pOut;
++				if(efuseType == EFUSE_WIFI)
++					*pu2Tmp = (u16)(EFUSE_REAL_CONTENT_LEN-EFUSE_OOB_PROTECT_BYTES);
++				else
++					*pu2Tmp = (u16)(EFUSE_REAL_CONTENT_LEN-EFUSE_PROTECT_BYTES_BANK);
++			}
++			break;
++		case TYPE_AVAILABLE_EFUSE_BYTES_TOTAL:
++			{
++				u16 *pu2Tmp;
++				pu2Tmp = (u16 *)pOut;
++				if(efuseType == EFUSE_WIFI)
++					*pu2Tmp = (u16)(EFUSE_REAL_CONTENT_LEN-EFUSE_OOB_PROTECT_BYTES);
++				else
++					*pu2Tmp = (u16)(EFUSE_BT_REAL_CONTENT_LEN-(EFUSE_PROTECT_BYTES_BANK*3));
++			}
++			break;
++		case TYPE_EFUSE_MAP_LEN:
++			{
++				u16 *pu2Tmp;
++				pu2Tmp = (u16 *)pOut;
++				if(efuseType == EFUSE_WIFI)
++					*pu2Tmp = (u16)EFUSE_MAP_LEN_8723;
++				else
++					*pu2Tmp = (u16)EFUSE_BT_MAP_LEN;
++			}
++			break;
++		case TYPE_EFUSE_PROTECT_BYTES_BANK:
++			{
++				u8 *pu1Tmp;
++				pu1Tmp = (u8 *)pOut;
++				if(efuseType == EFUSE_WIFI)
++					*pu1Tmp = (u8)(EFUSE_OOB_PROTECT_BYTES);
++				else
++					*pu1Tmp = (u8)(EFUSE_PROTECT_BYTES_BANK);
++			}
++			break;
++		default:
++			{
++				u8 *pu1Tmp;
++				pu1Tmp = (u8 *)pOut;
++				*pu1Tmp = 0;
++			}
++			break;
++	}
++}
++
++static VOID
++rtl8192c_EFUSE_GetEfuseDefinition(
++	IN		PADAPTER	pAdapter,
++	IN		u8		efuseType,
++	IN		u8		type,
++	OUT		PVOID		*pOut,
++	IN		BOOLEAN		bPseudoTest
++	)
++{
++	if(bPseudoTest)
++	{
++		Hal_EFUSEGetEfuseDefinition_Pseudo(pAdapter, efuseType, type, pOut);
++	}
++	else
++	{
++		Hal_EFUSEGetEfuseDefinition(pAdapter, efuseType, type, pOut);
++	}
++}
++
++static u8
++Hal_EfuseWordEnableDataWrite(	IN	PADAPTER	pAdapter,
++							IN	u16		efuse_addr,
++							IN	u8		word_en, 
++							IN	u8		*data,
++							IN	BOOLEAN		bPseudoTest)
++{		
++	u16	tmpaddr = 0;
++	u16	start_addr = efuse_addr;
++	u8	badworden = 0x0F;
++	u8	tmpdata[8]; 
++	
++	_rtw_memset((PVOID)tmpdata, 0xff, PGPKT_DATA_SIZE);
++	//RT_TRACE(COMP_EFUSE, DBG_LOUD, ("word_en = %x efuse_addr=%x\n", word_en, efuse_addr));
++
++	if(!(word_en&BIT0))
++	{
++		tmpaddr = start_addr;
++		efuse_OneByteWrite(pAdapter,start_addr++, data[0], bPseudoTest);
++		efuse_OneByteWrite(pAdapter,start_addr++, data[1], bPseudoTest);
++
++		efuse_OneByteRead(pAdapter,tmpaddr, &tmpdata[0], bPseudoTest);
++		efuse_OneByteRead(pAdapter,tmpaddr+1, &tmpdata[1], bPseudoTest);
++		if((data[0]!=tmpdata[0])||(data[1]!=tmpdata[1])){
++			badworden &= (~BIT0);
++		}
++	}
++	if(!(word_en&BIT1))
++	{
++		tmpaddr = start_addr;
++		efuse_OneByteWrite(pAdapter,start_addr++, data[2], bPseudoTest);
++		efuse_OneByteWrite(pAdapter,start_addr++, data[3], bPseudoTest);
++				
++		efuse_OneByteRead(pAdapter,tmpaddr    , &tmpdata[2], bPseudoTest);
++		efuse_OneByteRead(pAdapter,tmpaddr+1, &tmpdata[3], bPseudoTest);
++		if((data[2]!=tmpdata[2])||(data[3]!=tmpdata[3])){
++			badworden &=( ~BIT1);
++		}
++	}
++	if(!(word_en&BIT2))
++	{
++		tmpaddr = start_addr;
++		efuse_OneByteWrite(pAdapter,start_addr++, data[4], bPseudoTest);
++		efuse_OneByteWrite(pAdapter,start_addr++, data[5], bPseudoTest);
++
++		efuse_OneByteRead(pAdapter,tmpaddr, &tmpdata[4], bPseudoTest);							
++		efuse_OneByteRead(pAdapter,tmpaddr+1, &tmpdata[5], bPseudoTest);
++		if((data[4]!=tmpdata[4])||(data[5]!=tmpdata[5])){
++			badworden &=( ~BIT2);
++		}
++	}
++	if(!(word_en&BIT3))
++	{
++		tmpaddr = start_addr;
++		efuse_OneByteWrite(pAdapter,start_addr++, data[6], bPseudoTest);
++		efuse_OneByteWrite(pAdapter,start_addr++, data[7], bPseudoTest);
++
++		efuse_OneByteRead(pAdapter,tmpaddr, &tmpdata[6], bPseudoTest);
++		efuse_OneByteRead(pAdapter,tmpaddr+1, &tmpdata[7], bPseudoTest);
++		if((data[6]!=tmpdata[6])||(data[7]!=tmpdata[7])){
++			badworden &=( ~BIT3);
++		}
++	}
++	return badworden;
++}
++
++static u8
++Hal_EfuseWordEnableDataWrite_Pseudo(	IN	PADAPTER	pAdapter,
++							IN	u16		efuse_addr,
++							IN	u8		word_en, 
++							IN	u8		*data,
++							IN	BOOLEAN		bPseudoTest)
++{
++	u8	ret=0;
++	
++	ret = Hal_EfuseWordEnableDataWrite(pAdapter, efuse_addr, word_en, data, bPseudoTest);
++
++	return ret;
++}
++
++static u8
++rtl8192c_Efuse_WordEnableDataWrite(	IN	PADAPTER	pAdapter,
++							IN	u16		efuse_addr,
++							IN	u8		word_en, 
++							IN	u8		*data,
++							IN	BOOLEAN		bPseudoTest)
++{
++	u8	ret=0;
++
++	if(bPseudoTest)
++	{
++		ret = Hal_EfuseWordEnableDataWrite_Pseudo(pAdapter, efuse_addr, word_en, data, bPseudoTest);
++	}
++	else
++	{
++		ret = Hal_EfuseWordEnableDataWrite(pAdapter, efuse_addr, word_en, data, bPseudoTest);
++	}
++	
++	return ret;
++}
++
++
++static u16
++hal_EfuseGetCurrentSize_8192C(IN	PADAPTER	pAdapter,
++	IN		BOOLEAN		bPseudoTest)
++{
++	int bContinual = _TRUE;
++
++	u16	efuse_addr = 0;
++	u8	hoffset=0,hworden=0;	
++	u8	efuse_data,word_cnts=0;
++		
++	while (	bContinual && 
++			efuse_OneByteRead(pAdapter, efuse_addr ,&efuse_data, bPseudoTest) && 
++			(efuse_addr  < EFUSE_REAL_CONTENT_LEN) )
++	{			
++		if(efuse_data!=0xFF)
++		{					
++			hoffset = (efuse_data>>4) & 0x0F;
++			hworden =  efuse_data & 0x0F;									
++			word_cnts = Efuse_CalculateWordCnts(hworden);
++			//read next header							
++			efuse_addr = efuse_addr + (word_cnts*2)+1;						
++		}
++		else
++		{
++			bContinual = _FALSE ;			
++		}
++	}
++
++	return efuse_addr;	
++}
++
++static u16
++Hal_EfuseGetCurrentSize_BT(IN	PADAPTER	pAdapter,
++		IN		BOOLEAN			bPseudoTest)
++{
++	int	bContinual = _TRUE;
++	u16	efuse_addr = 0;
++	u8	hoffset=0,hworden=0;	
++	u8	efuse_data,word_cnts=0;
++	u8	bank=0, startBank=0;
++	u16	retU2=0;
++	u32	total_efuse_used=0;
++
++	if(bPseudoTest)
++	{
++		efuse_addr = (u16)((fakeBTEfuseUsedBytes%EFUSE_REAL_CONTENT_LEN));
++		startBank = (u8)(1+(fakeBTEfuseUsedBytes/EFUSE_REAL_CONTENT_LEN));
++	}
++	else
++	{
++		efuse_addr = (u16)((BTEfuseUsedBytes%EFUSE_REAL_CONTENT_LEN));
++		startBank = (u8)(1+(BTEfuseUsedBytes/EFUSE_REAL_CONTENT_LEN));
++	}
++
++	if((startBank < 1) || (startBank >= EFUSE_MAX_BANK))
++		DBG_8192C("Error, bank error, bank=%d\n", bank);
++
++	//RTPRINT(FEEPROM, EFUSE_PG, ("Hal_EfuseGetCurrentSize_BT(), start bank=%d, start_efuse_addr = %d\n", startBank, efuse_addr));
++	
++	for(bank=startBank; bank<EFUSE_MAX_BANK; bank++)
++	{
++		if(!Hal_EfuseSwitchToBank(pAdapter, bank, bPseudoTest))
++			break;
++		else
++		{
++			bContinual = _TRUE;
++			if(bank != startBank)	// only when bank is switched we have to reset the efuse_addr.
++				efuse_addr = 0;
++		}
++		
++		while (	bContinual && 
++				efuse_OneByteRead(pAdapter, efuse_addr ,&efuse_data, bPseudoTest) && 
++				AVAILABLE_EFUSE_ADDR(efuse_addr))
++		{			
++			if(efuse_data!=0xFF)
++			{
++				if((efuse_data&0x1F) == 0x0F)		//extended header
++				{
++					hoffset = efuse_data;
++					efuse_addr++;
++					efuse_OneByteRead(pAdapter, efuse_addr ,&efuse_data, bPseudoTest);
++					if((efuse_data & 0x0F) == 0x0F)
++					{
++						efuse_addr++;
++						continue;
++					}
++					else
++					{
++						hoffset = ((hoffset & 0xE0) >> 5) | ((efuse_data & 0xF0) >> 1);
++						hworden = efuse_data & 0x0F;
++					}
++				}		
++				else
++				{
++					hoffset = (efuse_data>>4) & 0x0F;
++					hworden =  efuse_data & 0x0F;									
++				}
++				word_cnts = Efuse_CalculateWordCnts(hworden);
++				//read next header							
++				efuse_addr = efuse_addr + (word_cnts*2)+1;						
++			}
++			else
++			{
++				bContinual = _FALSE ;
++			}
++		}
++
++		// Check if we need to check next bank efuse
++		if(efuse_addr < (EFUSE_REAL_CONTENT_LEN-EFUSE_PROTECT_BYTES_BANK))
++		{
++			break;// don't need to check next bank.
++		}
++	}
++
++	retU2 = ((bank-1)*EFUSE_REAL_CONTENT_LEN)+efuse_addr;
++	if(bPseudoTest)
++	{
++		fakeBTEfuseUsedBytes = retU2;
++		//RTPRINT(FEEPROM, EFUSE_PG, ("Hal_EfuseGetCurrentSize_BT(), return %d\n", fakeBTEfuseUsedBytes));
++	}
++	else
++	{
++		BTEfuseUsedBytes = retU2;
++		//RTPRINT(FEEPROM, EFUSE_PG, ("Hal_EfuseGetCurrentSize_BT(), return %d\n", BTEfuseUsedBytes));
++	}
++
++	return retU2;
++}	
++
++
++static u16
++hal_EfuseGetCurrentSize_8723(IN	PADAPTER	pAdapter,
++		IN		BOOLEAN			bPseudoTest)
++{
++	int	bContinual = _TRUE;
++
++	u16	efuse_addr = 0;
++	u8	hoffset=0,hworden=0;	
++	u8	efuse_data,word_cnts=0;
++
++	if(bPseudoTest)
++	{
++		efuse_addr = (u16)(fakeEfuseUsedBytes);
++	}
++	else
++	{
++		rtw_hal_get_hwreg(pAdapter, HW_VAR_EFUSE_BYTES, (u8 *)&efuse_addr);
++	}
++	//RTPRINT(FEEPROM, EFUSE_PG, ("hal_EfuseGetCurrentSize_8723(), start_efuse_addr = %d\n", efuse_addr));
++	
++	while (	bContinual && 
++			efuse_OneByteRead(pAdapter, efuse_addr ,&efuse_data, bPseudoTest) && 
++			AVAILABLE_EFUSE_ADDR(efuse_addr))
++	{			
++		if(efuse_data!=0xFF)
++		{					
++			if((efuse_data&0x1F) == 0x0F)		//extended header
++			{
++				hoffset = efuse_data;
++				efuse_addr++;
++				efuse_OneByteRead(pAdapter, efuse_addr ,&efuse_data, bPseudoTest);
++				if((efuse_data & 0x0F) == 0x0F)
++				{
++					efuse_addr++;
++					continue;
++				}
++				else
++				{
++					hoffset = ((hoffset & 0xE0) >> 5) | ((efuse_data & 0xF0) >> 1);
++					hworden = efuse_data & 0x0F;
++				}
++			}		
++			else
++			{
++				hoffset = (efuse_data>>4) & 0x0F;
++				hworden =  efuse_data & 0x0F;									
++			}
++			word_cnts = Efuse_CalculateWordCnts(hworden);
++			//read next header							
++			efuse_addr = efuse_addr + (word_cnts*2)+1;						
++		}
++		else
++		{
++			bContinual = _FALSE ;			
++		}
++	}
++
++	if(bPseudoTest)
++	{
++		fakeEfuseUsedBytes = efuse_addr;
++		//RTPRINT(FEEPROM, EFUSE_PG, ("hal_EfuseGetCurrentSize_8723(), return %d\n", fakeEfuseUsedBytes));
++	}
++	else
++	{
++		rtw_hal_set_hwreg(pAdapter, HW_VAR_EFUSE_BYTES, (u8 *)&efuse_addr);
++		//RTPRINT(FEEPROM, EFUSE_PG, ("hal_EfuseGetCurrentSize_8723(), return %d\n", efuse_addr));
++	}
++	
++	return efuse_addr;	
++}	
++
++static u16
++Hal_EfuseGetCurrentSize_Pseudo(IN	PADAPTER	pAdapter,
++		IN		BOOLEAN			bPseudoTest)
++{
++	u16	ret=0;
++	
++	ret = hal_EfuseGetCurrentSize_8723(pAdapter, bPseudoTest);
++
++	return ret;
++}
++
++static u16
++rtl8192c_EfuseGetCurrentSize(
++	IN	PADAPTER	pAdapter,
++	IN	u8			efuseType,
++	IN	BOOLEAN		bPseudoTest)
++{
++	u16	ret=0;
++
++	if(efuseType == EFUSE_WIFI)
++	{
++		if(bPseudoTest)
++		{
++			ret = Hal_EfuseGetCurrentSize_Pseudo(pAdapter, bPseudoTest);
++		}
++		else
++		{
++			if(IS_HARDWARE_TYPE_8192C(pAdapter))
++			{
++				ret = hal_EfuseGetCurrentSize_8192C(pAdapter, bPseudoTest);
++			}
++			else if(IS_HARDWARE_TYPE_8723A(pAdapter))
++			{
++				ret = hal_EfuseGetCurrentSize_8723(pAdapter, bPseudoTest);
++			}
++		}
++	}
++	else
++	{
++		ret = Hal_EfuseGetCurrentSize_BT(pAdapter, bPseudoTest);
++	}
++
++	return ret;
++}
++
++static int
++hal_EfusePgPacketRead_8192C(	IN	PADAPTER	pAdapter,
++					IN	u8			offset,
++					IN	u8			*data,
++					IN	BOOLEAN			bPseudoTest)
++{	
++	u8	ReadState = PG_STATE_HEADER;	
++	
++	int	bContinual = _TRUE;
++	int	bDataEmpty = _TRUE ;	
++
++	u8	efuse_data,word_cnts=0;
++	u16	efuse_addr = 0;
++	u8	hoffset=0,hworden=0;	
++	u8	tmpidx=0;
++	u8	tmpdata[8];
++	
++	if(data==NULL)	return _FALSE;
++	if(offset>15)		return _FALSE;	
++	
++
++	_rtw_memset((PVOID)data, 0xff, sizeof(u8)*PGPKT_DATA_SIZE);
++	_rtw_memset((PVOID)tmpdata, 0xff, sizeof(u8)*PGPKT_DATA_SIZE);
++	
++	//
++	// <Roger_TODO> Efuse has been pre-programmed dummy 5Bytes at the end of Efuse by CP.
++	// Skip dummy parts to prevent unexpected data read from Efuse.
++	// By pass right now. 2009.02.19.
++	//
++	while(bContinual && (efuse_addr  < EFUSE_REAL_CONTENT_LEN) )
++	{			
++		//-------  Header Read -------------
++		if(ReadState & PG_STATE_HEADER)
++		{
++			if(efuse_OneByteRead(pAdapter, efuse_addr ,&efuse_data, bPseudoTest)&&(efuse_data!=0xFF)){				
++				hoffset = (efuse_data>>4) & 0x0F;
++				hworden =  efuse_data & 0x0F;									
++				word_cnts = Efuse_CalculateWordCnts(hworden);
++				bDataEmpty = _TRUE ;
++
++				if(hoffset==offset){
++					for(tmpidx = 0;tmpidx< word_cnts*2 ;tmpidx++){
++						if(efuse_OneByteRead(pAdapter, efuse_addr+1+tmpidx ,&efuse_data, bPseudoTest) ){
++							tmpdata[tmpidx] = efuse_data;
++							if(efuse_data!=0xff){						
++								bDataEmpty = _FALSE;
++							}
++						}					
++					}
++					if(bDataEmpty==_FALSE){
++						ReadState = PG_STATE_DATA;							
++					}else{//read next header							
++						efuse_addr = efuse_addr + (word_cnts*2)+1;
++						ReadState = PG_STATE_HEADER; 
++					}
++				}
++				else{//read next header	
++					efuse_addr = efuse_addr + (word_cnts*2)+1;
++					ReadState = PG_STATE_HEADER; 
++				}
++				
++			}
++			else{
++				bContinual = _FALSE ;
++			}
++		}		
++		//-------  Data section Read -------------
++		else if(ReadState & PG_STATE_DATA)
++		{
++			efuse_WordEnableDataRead(hworden,tmpdata,data);
++			efuse_addr = efuse_addr + (word_cnts*2)+1;
++			ReadState = PG_STATE_HEADER; 
++		}
++		
++	}
++		
++	if(	(data[0]==0xff) &&(data[1]==0xff) && (data[2]==0xff)  && (data[3]==0xff) &&
++		(data[4]==0xff) &&(data[5]==0xff) && (data[6]==0xff)  && (data[7]==0xff))
++		return _FALSE;
++	else
++		return _TRUE;
++
++}
++
++static int
++hal_EfusePgPacketRead_8723(	IN	PADAPTER	pAdapter,
++					IN	u8			offset,
++					IN	u8			*data,
++					IN	BOOLEAN			bPseudoTest)
++{	
++	u8	ReadState = PG_STATE_HEADER;	
++	
++	int	bContinual = _TRUE;
++	int	bDataEmpty = _TRUE ;	
++
++	u8	efuse_data,word_cnts=0;
++	u16	efuse_addr = 0;
++	u8	hoffset=0,hworden=0;	
++	u8	tmpidx=0;
++	u8	tmpdata[8];
++	u8	max_section=0;
++	u8	tmp_header = 0;
++
++	EFUSE_GetEfuseDefinition(pAdapter, EFUSE_WIFI, TYPE_EFUSE_MAX_SECTION, (PVOID)&max_section, bPseudoTest);
++	
++	if(data==NULL)
++		return _FALSE;
++	if(offset>max_section)
++		return _FALSE;
++
++	_rtw_memset((PVOID)data, 0xff, sizeof(u8)*PGPKT_DATA_SIZE);
++	_rtw_memset((PVOID)tmpdata, 0xff, sizeof(u8)*PGPKT_DATA_SIZE);
++	
++	
++	//
++	// <Roger_TODO> Efuse has been pre-programmed dummy 5Bytes at the end of Efuse by CP.
++	// Skip dummy parts to prevent unexpected data read from Efuse.
++	// By pass right now. 2009.02.19.
++	//
++	while(bContinual && AVAILABLE_EFUSE_ADDR(efuse_addr) )
++	{			
++		//-------  Header Read -------------
++		if(ReadState & PG_STATE_HEADER)
++		{
++			if(efuse_OneByteRead(pAdapter, efuse_addr ,&efuse_data, bPseudoTest)&&(efuse_data!=0xFF))			
++			{
++				if(EXT_HEADER(efuse_data))
++				{
++					tmp_header = efuse_data;
++					efuse_addr++;
++					efuse_OneByteRead(pAdapter, efuse_addr ,&efuse_data, bPseudoTest);
++					if(!ALL_WORDS_DISABLED(efuse_data))
++					{
++						hoffset = ((tmp_header & 0xE0) >> 5) | ((efuse_data & 0xF0) >> 1);
++						hworden = efuse_data & 0x0F;						
++					}
++					else
++					{
++						DBG_8192C("Error, All words disabled\n");
++						efuse_addr++;
++						continue;
++					}
++				}
++				else	
++				{
++					hoffset = (efuse_data>>4) & 0x0F;
++					hworden =  efuse_data & 0x0F;									
++				}
++				word_cnts = Efuse_CalculateWordCnts(hworden);
++				bDataEmpty = _TRUE ;
++
++				if(hoffset==offset)
++				{
++					for(tmpidx = 0;tmpidx< word_cnts*2 ;tmpidx++)
++					{
++						if(efuse_OneByteRead(pAdapter, efuse_addr+1+tmpidx ,&efuse_data, bPseudoTest) )
++						{
++							tmpdata[tmpidx] = efuse_data;
++							if(efuse_data!=0xff)
++							{						
++								bDataEmpty = _FALSE;
++							}
++						}					
++					}
++					if(bDataEmpty==_FALSE){
++						ReadState = PG_STATE_DATA;							
++					}else{//read next header							
++						efuse_addr = efuse_addr + (word_cnts*2)+1;
++						ReadState = PG_STATE_HEADER; 
++					}
++				}
++				else{//read next header	
++					efuse_addr = efuse_addr + (word_cnts*2)+1;
++					ReadState = PG_STATE_HEADER; 
++				}
++				
++			}
++			else{
++				bContinual = _FALSE ;
++			}
++		}		
++		//-------  Data section Read -------------
++		else if(ReadState & PG_STATE_DATA)
++		{
++			efuse_WordEnableDataRead(hworden,tmpdata,data);
++			efuse_addr = efuse_addr + (word_cnts*2)+1;
++			ReadState = PG_STATE_HEADER; 
++		}
++		
++	}			
++	
++	if(	(data[0]==0xff) &&(data[1]==0xff) && (data[2]==0xff)  && (data[3]==0xff) &&
++		(data[4]==0xff) &&(data[5]==0xff) && (data[6]==0xff)  && (data[7]==0xff))
++		return _FALSE;
++	else
++		return _TRUE;
++
++}
++
++static int
++Hal_EfusePgPacketRead(	IN	PADAPTER	pAdapter,
++					IN	u8			offset,
++					IN	u8			*data,
++					IN	BOOLEAN			bPseudoTest)
++{
++	int	ret=0;
++
++	if(IS_HARDWARE_TYPE_8192C(pAdapter))
++	{
++		ret = hal_EfusePgPacketRead_8192C(pAdapter, offset, data, bPseudoTest);
++	}
++	else if(IS_HARDWARE_TYPE_8723A(pAdapter))
++	{
++		ret = hal_EfusePgPacketRead_8723(pAdapter, offset, data, bPseudoTest);
++	}
++
++	return ret;
++}
++
++static int
++Hal_EfusePgPacketRead_Pseudo(	IN	PADAPTER	pAdapter,
++					IN	u8			offset,
++					IN	u8			*data,
++					IN	BOOLEAN		bPseudoTest)
++{
++	int	ret=0;
++	
++	ret = hal_EfusePgPacketRead_8723(pAdapter, offset, data, bPseudoTest);
++
++	return ret;
++}
++
++static int
++rtl8192c_Efuse_PgPacketRead(	IN	PADAPTER	pAdapter,
++					IN	u8			offset,
++					IN	u8			*data,
++					IN	BOOLEAN		bPseudoTest)
++{
++	int	ret=0;
++
++	if(bPseudoTest)
++	{
++		ret = Hal_EfusePgPacketRead_Pseudo(pAdapter, offset, data, bPseudoTest);
++	}
++	else
++	{
++		ret = Hal_EfusePgPacketRead(pAdapter, offset, data, bPseudoTest);
++	}
++
++	return ret;
++}
++
++static BOOLEAN
++hal_EfuseFixHeaderProcess(
++	IN		PADAPTER			pAdapter,
++	IN		u8					efuseType,
++	IN		PPGPKT_STRUCT		pFixPkt,
++	IN		u16					*pAddr,
++	IN		BOOLEAN				bPseudoTest
++)
++{
++	u8	originaldata[8], badworden=0;
++	u16	efuse_addr=*pAddr;
++	u32	PgWriteSuccess=0;
++	
++	_rtw_memset((PVOID)originaldata, 0xff, 8);
++					
++	if(Efuse_PgPacketRead(pAdapter, pFixPkt->offset, originaldata, bPseudoTest))
++	{	//check if data exist
++		badworden = Efuse_WordEnableDataWrite(pAdapter, efuse_addr+1, pFixPkt->word_en, originaldata, bPseudoTest);
++
++		if(badworden != 0xf)	// write fail
++		{
++			if(efuseType == EFUSE_WIFI)
++				PgWriteSuccess = Efuse_PgPacketWrite(pAdapter, pFixPkt->offset, badworden, originaldata, bPseudoTest);
++			else
++				PgWriteSuccess = hal_EfusePgPacketWrite_BT(pAdapter, pFixPkt->offset, badworden, originaldata, bPseudoTest);
++			if(!PgWriteSuccess)
++				return _FALSE;
++			else
++				efuse_addr = Efuse_GetCurrentSize(pAdapter, efuseType, bPseudoTest);
++		}
++		else
++		{
++			efuse_addr = efuse_addr + (pFixPkt->word_cnts*2) +1;
++		}
++	}
++	else
++	{
++		efuse_addr = efuse_addr + (pFixPkt->word_cnts*2) +1;
++	}
++	*pAddr = efuse_addr;
++	return _TRUE;
++}
++
++static BOOLEAN
++hal_EfusePgPacketWrite2ByteHeader(
++	IN			PADAPTER		pAdapter,
++	IN			u8				efuseType,
++	IN			u16				*pAddr,
++	IN			PPGPKT_STRUCT	pTargetPkt,
++	IN			BOOLEAN			bPseudoTest)
++{
++	BOOLEAN		bRet=_FALSE, bContinual=_TRUE;
++	u16	efuse_addr=*pAddr, efuse_max_available_len=0;
++	u8	pg_header=0, tmp_header=0, pg_header_temp=0;
++	u8	repeatcnt=0;
++
++	//RTPRINT(FEEPROM, EFUSE_PG, ("Wirte 2byte header\n"));
++	EFUSE_GetEfuseDefinition(pAdapter, efuseType, TYPE_AVAILABLE_EFUSE_BYTES_BANK, (PVOID)&efuse_max_available_len, bPseudoTest);
++
++	while(efuse_addr < efuse_max_available_len)
++	{
++		pg_header = ((pTargetPkt->offset & 0x07) << 5) | 0x0F;
++		//RTPRINT(FEEPROM, EFUSE_PG, ("pg_header = 0x%x\n", pg_header));
++		efuse_OneByteWrite(pAdapter, efuse_addr, pg_header, bPseudoTest);
++		efuse_OneByteRead(pAdapter, efuse_addr, &tmp_header, bPseudoTest);
++
++		while(tmp_header == 0xFF)
++		{
++			if(repeatcnt++ > EFUSE_REPEAT_THRESHOLD_)
++			{
++				//RTPRINT(FEEPROM, EFUSE_PG, ("Repeat over limit for pg_header!!\n"));
++				return _FALSE;
++			}
++
++			efuse_OneByteWrite(pAdapter, efuse_addr, pg_header, bPseudoTest);
++			efuse_OneByteRead(pAdapter, efuse_addr, &tmp_header, bPseudoTest);
++		}
++		
++		//to write ext_header
++		if(tmp_header == pg_header)
++		{
++			efuse_addr++;
++			pg_header_temp = pg_header;
++			pg_header = ((pTargetPkt->offset & 0x78) << 1) | pTargetPkt->word_en;
++
++			efuse_OneByteWrite(pAdapter, efuse_addr, pg_header, bPseudoTest);
++			efuse_OneByteRead(pAdapter, efuse_addr, &tmp_header, bPseudoTest);
++
++			while(tmp_header == 0xFF)
++			{											
++				if(repeatcnt++ > EFUSE_REPEAT_THRESHOLD_)
++				{
++					//RTPRINT(FEEPROM, EFUSE_PG, ("Repeat over limit for ext_header!!\n"));
++					return _FALSE;
++				}							
++
++				efuse_OneByteWrite(pAdapter, efuse_addr, pg_header, bPseudoTest);
++				efuse_OneByteRead(pAdapter, efuse_addr, &tmp_header, bPseudoTest);
++			}
++
++			if((tmp_header & 0x0F) == 0x0F)	//word_en PG fail
++			{
++				if(repeatcnt++ > EFUSE_REPEAT_THRESHOLD_)
++				{
++					//RTPRINT(FEEPROM, EFUSE_PG, ("Repeat over limit for word_en!!\n"));
++					return _FALSE;
++				}
++				else
++				{
++					efuse_addr++;
++					continue;
++				}
++			}
++			else if(pg_header != tmp_header)	//offset PG fail						
++			{
++				PGPKT_STRUCT	fixPkt;
++				//RTPRINT(FEEPROM, EFUSE_PG, ("Error condition for offset PG fail, need to cover the existed data\n"));
++				fixPkt.offset = ((pg_header_temp & 0xE0) >> 5) | ((tmp_header & 0xF0) >> 1);
++				fixPkt.word_en = tmp_header & 0x0F;					
++				fixPkt.word_cnts = Efuse_CalculateWordCnts(fixPkt.word_en);
++				if(!hal_EfuseFixHeaderProcess(pAdapter, efuseType, &fixPkt, &efuse_addr, bPseudoTest))
++					return _FALSE;
++			}
++			else
++			{
++				bRet = _TRUE;
++				break;
++			}
++		}
++		else if ((tmp_header & 0x1F) == 0x0F)		//wrong extended header
++		{
++			efuse_addr+=2;
++			continue;						
++		}
++	}
++
++	*pAddr = efuse_addr;
++	return bRet;
++}
++
++static BOOLEAN
++hal_EfusePgPacketWrite1ByteHeader(
++	IN			PADAPTER		pAdapter, 
++	IN			u8				efuseType,
++	IN			u16				*pAddr,
++	IN			PPGPKT_STRUCT	pTargetPkt,
++	IN			BOOLEAN			bPseudoTest)
++{
++	BOOLEAN		bRet=_FALSE;
++	u8	pg_header=0, tmp_header=0;
++	u16	efuse_addr=*pAddr;
++	u8	repeatcnt=0;
++
++	//RTPRINT(FEEPROM, EFUSE_PG, ("Wirte 1byte header\n"));
++	pg_header = ((pTargetPkt->offset << 4) & 0xf0) |pTargetPkt->word_en;
++	
++	efuse_OneByteWrite(pAdapter, efuse_addr, pg_header, bPseudoTest);
++	efuse_OneByteRead(pAdapter, efuse_addr, &tmp_header, bPseudoTest);
++
++	while(tmp_header == 0xFF)
++	{
++		if(repeatcnt++ > EFUSE_REPEAT_THRESHOLD_)
++		{
++			return _FALSE;
++		}
++		efuse_OneByteWrite(pAdapter,efuse_addr, pg_header, bPseudoTest);
++		efuse_OneByteRead(pAdapter,efuse_addr, &tmp_header, bPseudoTest);
++	}
++	
++	if(pg_header == tmp_header)
++	{
++		bRet = _TRUE;
++	}
++	else
++	{
++		PGPKT_STRUCT	fixPkt;
++		//RTPRINT(FEEPROM, EFUSE_PG, ("Error condition for fixed PG packet, need to cover the existed data\n"));
++		fixPkt.offset = (tmp_header>>4) & 0x0F;
++		fixPkt.word_en = tmp_header & 0x0F;					
++		fixPkt.word_cnts = Efuse_CalculateWordCnts(fixPkt.word_en);
++		if(!hal_EfuseFixHeaderProcess(pAdapter, efuseType, &fixPkt, &efuse_addr, bPseudoTest))
++			return _FALSE;
++	}
++	
++	*pAddr = efuse_addr;
++	return bRet;
++}
++
++static BOOLEAN
++hal_EfusePgPacketWriteData(
++	IN			PADAPTER		pAdapter, 
++	IN			u8				efuseType,
++	IN			u16				*pAddr,
++	IN			PPGPKT_STRUCT	pTargetPkt,
++	IN			BOOLEAN			bPseudoTest)
++{
++	BOOLEAN	bRet=_FALSE;
++	u16	efuse_addr=*pAddr;
++	u8	badworden=0;
++	u32	PgWriteSuccess=0;
++
++	badworden = 0x0f;
++	badworden = Efuse_WordEnableDataWrite(pAdapter, efuse_addr+1, pTargetPkt->word_en, pTargetPkt->data, bPseudoTest);
++	if(badworden == 0x0F)
++	{
++		// write ok
++		//RTPRINT(FEEPROM, EFUSE_PG, ("hal_EfusePgPacketWriteData ok!!\n"));
++		return _TRUE;
++	}
++	else
++	{
++		//RTPRINT(FEEPROM, EFUSE_PG, ("hal_EfusePgPacketWriteData Fail!!\n"));
++		//reorganize other pg packet
++		if(efuseType == EFUSE_WIFI)
++			PgWriteSuccess = Efuse_PgPacketWrite(pAdapter, pTargetPkt->offset, badworden, pTargetPkt->data, bPseudoTest);
++		else
++			PgWriteSuccess = hal_EfusePgPacketWrite_BT(pAdapter, pTargetPkt->offset, badworden, pTargetPkt->data, bPseudoTest);
++		if(!PgWriteSuccess)
++			return _FALSE;
++		else
++			return _TRUE;
++	}
++
++	return bRet;
++}
++
++static BOOLEAN
++hal_EfusePgPacketWriteHeader(
++	IN			PADAPTER		pAdapter, 
++	IN			u8				efuseType,
++	IN			u16				*pAddr,
++	IN			PPGPKT_STRUCT	pTargetPkt,
++	IN			BOOLEAN			bPseudoTest)
++{
++	BOOLEAN		bRet=_FALSE;
++
++	if(pTargetPkt->offset >= EFUSE_MAX_SECTION_BASE)
++	{
++		bRet = hal_EfusePgPacketWrite2ByteHeader(pAdapter, efuseType, pAddr, pTargetPkt, bPseudoTest);
++	}
++	else
++	{
++		bRet = hal_EfusePgPacketWrite1ByteHeader(pAdapter, efuseType, pAddr, pTargetPkt, bPseudoTest);
++	}
++
++	return bRet;
++}
++
++static BOOLEAN
++hal_EfusePgCheckAvailableAddr(
++	IN	PADAPTER	pAdapter,
++	IN	u8			efuseType,
++	IN	BOOLEAN		bPseudoTest
++	)
++{
++	u16	efuse_max_available_len=0;
++	
++	EFUSE_GetEfuseDefinition(pAdapter, efuseType, TYPE_AVAILABLE_EFUSE_BYTES_TOTAL, (PVOID)&efuse_max_available_len, bPseudoTest);
++	//RTPRINT(FEEPROM, EFUSE_PG, ("efuse_max_available_len = %d\n", efuse_max_available_len));
++
++	if(Efuse_GetCurrentSize(pAdapter, efuseType, bPseudoTest) >= efuse_max_available_len)
++	{
++		//RTPRINT(FEEPROM, EFUSE_PG, ("hal_EfusePgCheckAvailableAddr error!!\n"));
++		return _FALSE;
++	}
++	return _TRUE;
++}
++
++static VOID
++hal_EfuseConstructPGPkt(
++					IN	u8 				offset,
++					IN	u8				word_en,
++					IN	u8				*pData,
++					IN	PPGPKT_STRUCT	pTargetPkt
++
++)
++{
++	_rtw_memset((PVOID)pTargetPkt->data, 0xFF, sizeof(u8)*8);
++	pTargetPkt->offset = offset;
++	pTargetPkt->word_en= word_en;
++	efuse_WordEnableDataRead(word_en, pData, pTargetPkt->data);
++	pTargetPkt->word_cnts = Efuse_CalculateWordCnts(pTargetPkt->word_en);
++
++	//RTPRINT(FEEPROM, EFUSE_PG, ("hal_EfuseConstructPGPkt(), targetPkt, offset=%d, word_en=0x%x, word_cnts=%d\n", pTargetPkt->offset, pTargetPkt->word_en, pTargetPkt->word_cnts));
++}
++
++static BOOLEAN
++hal_EfuseCheckIfDatafollowed(
++	IN		PADAPTER		pAdapter,
++	IN		u8				word_cnts,
++	IN		u16				startAddr,
++	IN		BOOLEAN			bPseudoTest
++	)
++{
++	BOOLEAN		bRet=_FALSE;
++	u8	i, efuse_data;
++	
++	for(i=0; i<(word_cnts*2) ; i++)
++	{
++		if(efuse_OneByteRead(pAdapter, (startAddr+i) ,&efuse_data, bPseudoTest)&&(efuse_data != 0xFF))
++			bRet = _TRUE;
++	}
++
++	return bRet;
++}
++
++static BOOLEAN
++wordEnMatched(
++	IN	PPGPKT_STRUCT	pTargetPkt,
++	IN	PPGPKT_STRUCT	pCurPkt,
++	IN	u8				*pWden
++)
++{
++	u8	match_word_en = 0x0F;	// default all words are disabled
++	u8	i;
++
++	// check if the same words are enabled both target and current PG packet
++	if( ((pTargetPkt->word_en & BIT0) == 0) &&
++		((pCurPkt->word_en & BIT0) == 0) )
++	{
++		match_word_en &= ~BIT0;				// enable word 0
++	}
++	if( ((pTargetPkt->word_en & BIT1) == 0) &&
++		((pCurPkt->word_en & BIT1) == 0) )
++	{
++		match_word_en &= ~BIT1;				// enable word 1
++	}
++	if( ((pTargetPkt->word_en & BIT2) == 0) &&
++		((pCurPkt->word_en & BIT2) == 0) )
++	{
++		match_word_en &= ~BIT2;				// enable word 2
++	}
++	if( ((pTargetPkt->word_en & BIT3) == 0) &&
++		((pCurPkt->word_en & BIT3) == 0) )
++	{
++		match_word_en &= ~BIT3;				// enable word 3
++	}
++
++	*pWden = match_word_en;
++
++	if(match_word_en != 0xf)
++		return _TRUE;
++	else
++		return _FALSE;
++}
++
++static BOOLEAN
++hal_EfusePartialWriteCheck(
++					IN	PADAPTER		pAdapter,
++					IN	u8				efuseType,
++					IN	u16				*pAddr,
++					IN	PPGPKT_STRUCT	pTargetPkt,
++					IN	BOOLEAN			bPseudoTest
++					)
++{
++	BOOLEAN		bRet=_FALSE;
++	u8	i, efuse_data=0, cur_header=0;
++	u8	new_wden=0, matched_wden=0, badworden=0;
++	u16	startAddr=0, efuse_max_available_len=0, efuse_max=0;
++	PGPKT_STRUCT	curPkt;
++
++	EFUSE_GetEfuseDefinition(pAdapter, efuseType, TYPE_AVAILABLE_EFUSE_BYTES_BANK, (PVOID)&efuse_max_available_len, bPseudoTest);
++	EFUSE_GetEfuseDefinition(pAdapter, efuseType, TYPE_EFUSE_REAL_CONTENT_LEN, (PVOID)&efuse_max, bPseudoTest);
++
++	if(efuseType == EFUSE_WIFI)
++	{
++		if(bPseudoTest)
++		{
++			startAddr = (u16)(fakeEfuseUsedBytes%EFUSE_REAL_CONTENT_LEN);
++		}
++		else
++		{
++			rtw_hal_get_hwreg(pAdapter, HW_VAR_EFUSE_BYTES, (u8 *)&startAddr);
++			startAddr%=EFUSE_REAL_CONTENT_LEN;
++		}
++	}
++	else
++	{
++		if(bPseudoTest)
++		{
++			startAddr = (u16)(fakeBTEfuseUsedBytes%EFUSE_REAL_CONTENT_LEN);
++		}
++		else
++		{
++			startAddr = (u16)(BTEfuseUsedBytes%EFUSE_REAL_CONTENT_LEN);
++		}
++	}
++	//RTPRINT(FEEPROM, EFUSE_PG, ("hal_EfusePartialWriteCheck(), startAddr=%d\n", startAddr));
++
++	while(1)
++	{
++		if(startAddr >= efuse_max_available_len) 
++		{
++			bRet = _FALSE;
++			break;
++		}
++		
++		if(efuse_OneByteRead(pAdapter, startAddr, &efuse_data, bPseudoTest) && (efuse_data!=0xFF))
++		{
++			if(EXT_HEADER(efuse_data))
++			{
++				cur_header = efuse_data;
++				startAddr++;
++				efuse_OneByteRead(pAdapter, startAddr, &efuse_data, bPseudoTest);
++				if(ALL_WORDS_DISABLED(efuse_data))
++				{
++					//RTPRINT(FEEPROM, EFUSE_PG, ("Error condition, all words disabled"));
++					bRet = _FALSE;
++					break;
++				}
++				else
++				{
++					curPkt.offset = ((cur_header & 0xE0) >> 5) | ((efuse_data & 0xF0) >> 1);
++					curPkt.word_en = efuse_data & 0x0F;
++				}
++			}
++			else
++			{
++				cur_header  =  efuse_data;					
++				curPkt.offset = (cur_header>>4) & 0x0F;
++				curPkt.word_en = cur_header & 0x0F;
++			}
++
++			curPkt.word_cnts = Efuse_CalculateWordCnts(curPkt.word_en);
++			// if same header is found but no data followed
++			// write some part of data followed by the header.
++			if( (curPkt.offset == pTargetPkt->offset) && 
++				(!hal_EfuseCheckIfDatafollowed(pAdapter, curPkt.word_cnts, startAddr+1, bPseudoTest)) &&
++				wordEnMatched(pTargetPkt, &curPkt, &matched_wden) )
++			{
++				//RTPRINT(FEEPROM, EFUSE_PG, ("Need to partial write data by the previous wrote header\n"));
++				// Here to write partial data
++				badworden = Efuse_WordEnableDataWrite(pAdapter, startAddr+1, matched_wden, pTargetPkt->data, bPseudoTest);
++				if(badworden != 0x0F)
++				{
++					u32	PgWriteSuccess=0;
++					// if write fail on some words, write these bad words again
++					if(efuseType == EFUSE_WIFI)
++						PgWriteSuccess = Efuse_PgPacketWrite(pAdapter, pTargetPkt->offset, badworden, pTargetPkt->data, bPseudoTest);
++					else
++						PgWriteSuccess = hal_EfusePgPacketWrite_BT(pAdapter, pTargetPkt->offset, badworden, pTargetPkt->data, bPseudoTest);
++
++					if(!PgWriteSuccess)
++					{
++						bRet = _FALSE;	// write fail, return
++						break;
++					}					
++				}
++				// partial write ok, update the target packet for later use		
++				for(i=0; i<4; i++)
++				{
++					if((matched_wden & (0x1<<i)) == 0)	// this word has been written
++					{
++						pTargetPkt->word_en |= (0x1<<i);	// disable the word
++					}
++				}
++				pTargetPkt->word_cnts = Efuse_CalculateWordCnts(pTargetPkt->word_en);
++			}
++			// read from next header
++			startAddr = startAddr + (curPkt.word_cnts*2) +1;	
++		}
++		else
++		{
++			// not used header, 0xff
++			*pAddr = startAddr;
++			//RTPRINT(FEEPROM, EFUSE_PG, ("Started from unused header offset=%d\n", startAddr));
++			bRet = _TRUE;
++			break;
++		}
++	}	
++	return bRet;
++}
++
++static BOOLEAN 
++hal_EfusePgPacketWrite_BT(
++					IN	PADAPTER	pAdapter, 
++					IN	u8 			offset,
++					IN	u8			word_en,
++					IN	u8			*pData,
++					IN	BOOLEAN		bPseudoTest
++					)
++{
++	PGPKT_STRUCT 	targetPkt;
++	u16	startAddr=0;
++	u8	efuseType=EFUSE_BT;
++	
++	if(!hal_EfusePgCheckAvailableAddr(pAdapter, efuseType, bPseudoTest))
++		return _FALSE;
++
++	hal_EfuseConstructPGPkt(offset, word_en, pData, &targetPkt);
++
++	if(!hal_EfusePartialWriteCheck(pAdapter, efuseType, &startAddr, &targetPkt, bPseudoTest))
++		return _FALSE;
++
++	if(!hal_EfusePgPacketWriteHeader(pAdapter, efuseType, &startAddr, &targetPkt, bPseudoTest))
++		return _FALSE;
++
++	if(!hal_EfusePgPacketWriteData(pAdapter, efuseType, &startAddr, &targetPkt, bPseudoTest))
++		return _FALSE;
++
++	return _TRUE;
++}
++
++static BOOLEAN 
++hal_EfusePgPacketWrite_8723(
++					IN	PADAPTER		pAdapter, 
++					IN	u8 			offset,
++					IN	u8			word_en,
++					IN	u8			*pData,
++					IN	BOOLEAN		bPseudoTest
++					)
++{
++	PGPKT_STRUCT 	targetPkt;
++	u16			startAddr=0;
++	u8			efuseType=EFUSE_WIFI;
++	
++	if(!hal_EfusePgCheckAvailableAddr(pAdapter, efuseType, bPseudoTest))
++		return _FALSE;
++
++	hal_EfuseConstructPGPkt(offset, word_en, pData, &targetPkt);
++
++	if(!hal_EfusePartialWriteCheck(pAdapter, efuseType, &startAddr, &targetPkt, bPseudoTest))
++		return _FALSE;
++
++	if(!hal_EfusePgPacketWriteHeader(pAdapter, efuseType, &startAddr, &targetPkt, bPseudoTest))
++		return _FALSE;
++
++	if(!hal_EfusePgPacketWriteData(pAdapter, efuseType, &startAddr, &targetPkt, bPseudoTest))
++		return _FALSE;
++
++	return _TRUE;
++}
++
++static int
++hal_EfusePgPacketWrite_8192C(IN	PADAPTER	pAdapter, 
++					IN	u8 			offset,
++					IN	u8			word_en,
++					IN	u8			*data,
++					IN	BOOLEAN		bPseudoTest)
++{
++	u8	WriteState = PG_STATE_HEADER;		
++
++	int	bContinual = _TRUE,bDataEmpty=_TRUE, bResult = _TRUE;
++	u16	efuse_addr = 0;
++	u8	efuse_data;
++
++	u8	pg_header = 0;
++
++	u8	tmp_word_cnts=0,target_word_cnts=0;
++	u8	tmp_header,match_word_en,tmp_word_en;
++
++	PGPKT_STRUCT target_pkt;	
++	PGPKT_STRUCT tmp_pkt;
++	
++	u8	originaldata[sizeof(u8)*8];
++	u8	tmpindex = 0,badworden = 0x0F;
++
++	static int	repeat_times = 0;
++	u8	efuseType=EFUSE_WIFI;
++
++	//
++	// <Roger_Notes> Efuse has been pre-programmed dummy 5Bytes at the end of Efuse by CP.
++	// So we have to prevent unexpected data string connection, which will cause
++	// incorrect data auto-load from HW. The total size is equal or smaller than 498bytes
++	// (i.e., offset 0~497, and dummy 1bytes) expected after CP test.
++	// 2009.02.19.
++	//
++	if( Efuse_GetCurrentSize(pAdapter, efuseType, bPseudoTest) >= (EFUSE_REAL_CONTENT_LEN-EFUSE_OOB_PROTECT_BYTES))
++	{
++		//RTPRINT(FEEPROM, EFUSE_PG, ("hal_EfusePgPacketWrite_8192C(), over size\n"));
++		return _FALSE;
++	}
++
++	// Init the 8 bytes content as 0xff
++	target_pkt.offset = offset;
++	target_pkt.word_en= word_en;
++
++	_rtw_memset((PVOID)target_pkt.data, 0xFF, sizeof(u8)*8);
++	
++	efuse_WordEnableDataRead(word_en,data,target_pkt.data);
++	target_word_cnts = Efuse_CalculateWordCnts(target_pkt.word_en);
++
++	//efuse_reg_ctrl(pAdapter,_TRUE);//power on
++	//RTPRINT(FEEPROM, EFUSE_PG, ("EFUSE Power ON\n"));
++
++	//
++	// <Roger_Notes> Efuse has been pre-programmed dummy 5Bytes at the end of Efuse by CP.
++	// So we have to prevent unexpected data string connection, which will cause
++	// incorrect data auto-load from HW. Dummy 1bytes is additional.
++	// 2009.02.19.
++	//
++	while( bContinual && (efuse_addr  < (EFUSE_REAL_CONTENT_LEN-EFUSE_OOB_PROTECT_BYTES)) )
++	{
++		
++		if(WriteState==PG_STATE_HEADER)
++		{	
++			bDataEmpty=_TRUE;
++			badworden = 0x0F;		
++			//************  so *******************
++			//RTPRINT(FEEPROM, EFUSE_PG, ("EFUSE PG_STATE_HEADER\n"));
++			if (	efuse_OneByteRead(pAdapter, efuse_addr ,&efuse_data, bPseudoTest) &&
++				(efuse_data!=0xFF))
++			{ 	
++				tmp_header  =  efuse_data;
++				
++				tmp_pkt.offset 	= (tmp_header>>4) & 0x0F;
++				tmp_pkt.word_en 	= tmp_header & 0x0F;					
++				tmp_word_cnts =  Efuse_CalculateWordCnts(tmp_pkt.word_en);
++
++				//************  so-1 *******************
++				if(tmp_pkt.offset  != target_pkt.offset)
++				{
++					efuse_addr = efuse_addr + (tmp_word_cnts*2) +1; //Next pg_packet
++					#if (EFUSE_ERROE_HANDLE == 1)
++					WriteState = PG_STATE_HEADER;
++					#endif
++				}
++				else
++				{	
++					//************  so-2 *******************
++					for(tmpindex=0 ; tmpindex<(tmp_word_cnts*2) ; tmpindex++)
++					{
++						if(efuse_OneByteRead(pAdapter, (efuse_addr+1+tmpindex) ,&efuse_data, bPseudoTest)&&(efuse_data != 0xFF)){
++							bDataEmpty = _FALSE;	
++						}
++					}	
++					//************  so-2-1 *******************
++					if(bDataEmpty == _FALSE)
++					{						
++						efuse_addr = efuse_addr + (tmp_word_cnts*2) +1; //Next pg_packet										
++						#if (EFUSE_ERROE_HANDLE == 1)
++						WriteState=PG_STATE_HEADER;
++						#endif
++					}
++					else
++					{//************  so-2-2 *******************
++						match_word_en = 0x0F;
++						if(   !( (target_pkt.word_en&BIT0)|(tmp_pkt.word_en&BIT0)  ))
++						{
++							 match_word_en &= (~BIT0);
++						}	
++						if(   !( (target_pkt.word_en&BIT1)|(tmp_pkt.word_en&BIT1)  ))
++						{
++							 match_word_en &= (~BIT1);
++						}
++						if(   !( (target_pkt.word_en&BIT2)|(tmp_pkt.word_en&BIT2)  ))
++						{
++							 match_word_en &= (~BIT2);
++						}
++						if(   !( (target_pkt.word_en&BIT3)|(tmp_pkt.word_en&BIT3)  ))
++						{
++							 match_word_en &= (~BIT3);
++						}					
++												
++						//************  so-2-2-A *******************
++						if((match_word_en&0x0F)!=0x0F)
++						{							
++							badworden = Efuse_WordEnableDataWrite(pAdapter,efuse_addr+1, tmp_pkt.word_en ,target_pkt.data, bPseudoTest);
++							
++							//************  so-2-2-A-1 *******************
++							//############################
++							if(0x0F != (badworden&0x0F))
++							{														
++								u8	reorg_offset = offset;
++								u8	reorg_worden=badworden;								
++								Efuse_PgPacketWrite(pAdapter,reorg_offset,reorg_worden,originaldata, bPseudoTest);
++							}	
++							//############################						
++
++							tmp_word_en = 0x0F;	
++							if(  (target_pkt.word_en&BIT0)^(match_word_en&BIT0)  )
++							{
++								tmp_word_en &= (~BIT0);
++							}
++							if(   (target_pkt.word_en&BIT1)^(match_word_en&BIT1) )
++							{
++								tmp_word_en &=  (~BIT1);
++							}
++							if(   (target_pkt.word_en&BIT2)^(match_word_en&BIT2) )
++							{
++								tmp_word_en &= (~BIT2);
++							}						
++							if(   (target_pkt.word_en&BIT3)^(match_word_en&BIT3) )
++							{
++								tmp_word_en &=(~BIT3);
++							}							
++						
++							//************  so-2-2-A-2 *******************	
++							if((tmp_word_en&0x0F)!=0x0F){
++								//reorganize other pg packet						
++								//efuse_addr = efuse_addr + (2*tmp_word_cnts) +1;//next pg packet addr							
++								efuse_addr = Efuse_GetCurrentSize(pAdapter, efuseType, bPseudoTest);
++								//===========================
++								target_pkt.offset = offset;
++								target_pkt.word_en= tmp_word_en;					
++								//===========================
++							}else{								
++								bContinual = _FALSE;
++							}
++							#if (EFUSE_ERROE_HANDLE == 1)
++							WriteState=PG_STATE_HEADER;
++							repeat_times++;
++							if(repeat_times>EFUSE_REPEAT_THRESHOLD_){
++								bContinual = _FALSE;
++								bResult = _FALSE;
++							}
++							#endif
++						}
++						else{//************  so-2-2-B *******************
++							//reorganize other pg packet						
++							efuse_addr = efuse_addr + (2*tmp_word_cnts) +1;//next pg packet addr							
++							//===========================
++							target_pkt.offset = offset;
++							target_pkt.word_en= target_pkt.word_en;					
++							//===========================			
++							#if (EFUSE_ERROE_HANDLE == 1)
++							WriteState=PG_STATE_HEADER;
++							#endif
++						}		
++					}				
++				}				
++				//RTPRINT(FEEPROM, EFUSE_PG, ("EFUSE PG_STATE_HEADER-1\n"));
++			}
++			else		//************  s1: header == oxff  *******************
++			{
++				pg_header = ((target_pkt.offset << 4)&0xf0) |target_pkt.word_en;
++
++				efuse_OneByteWrite(pAdapter,efuse_addr, pg_header, bPseudoTest);
++				efuse_OneByteRead(pAdapter,efuse_addr, &tmp_header, bPseudoTest);
++		
++				if(tmp_header == pg_header)
++				{ //************  s1-1*******************								
++					WriteState = PG_STATE_DATA;						
++				}				
++				#if (EFUSE_ERROE_HANDLE == 1)
++				else if(tmp_header == 0xFF){//************  s1-3: if Write or read func doesn't work *******************		
++					//efuse_addr doesn't change
++					WriteState = PG_STATE_HEADER;					
++					repeat_times++;
++					if(repeat_times>EFUSE_REPEAT_THRESHOLD_){
++						bContinual = _FALSE;
++						bResult = _FALSE;
++					}
++				}
++				#endif
++				else
++				{//************  s1-2 : fixed the header procedure *******************							
++					tmp_pkt.offset = (tmp_header>>4) & 0x0F;
++					tmp_pkt.word_en=  tmp_header & 0x0F;					
++					tmp_word_cnts =  Efuse_CalculateWordCnts(tmp_pkt.word_en);
++																											
++					//************  s1-2-A :cover the exist data *******************
++					//memset(originaldata,0xff,sizeof(UINT8)*8);
++					_rtw_memset((PVOID)originaldata, 0xff, sizeof(u8)*8);
++					
++					if(Efuse_PgPacketRead( pAdapter, tmp_pkt.offset,originaldata, bPseudoTest))
++					{	//check if data exist 					
++						//efuse_reg_ctrl(pAdapter,_TRUE);//power on
++						badworden = Efuse_WordEnableDataWrite(pAdapter,efuse_addr+1,tmp_pkt.word_en,originaldata, bPseudoTest);	
++						//############################
++						if(0x0F != (badworden&0x0F))
++						{														
++							u8	reorg_offset = tmp_pkt.offset;
++							u8	reorg_worden=badworden;								
++							Efuse_PgPacketWrite(pAdapter,reorg_offset,reorg_worden,originaldata, bPseudoTest);
++							efuse_addr = Efuse_GetCurrentSize(pAdapter, efuseType, bPseudoTest);	 
++						}
++						//############################
++						else{
++							efuse_addr = efuse_addr + (tmp_word_cnts*2) +1; //Next pg_packet							
++						}
++					}
++					 //************  s1-2-B: wrong address*******************
++					else
++					{
++						efuse_addr = efuse_addr + (tmp_word_cnts*2) +1; //Next pg_packet
++					}
++
++					#if (EFUSE_ERROE_HANDLE == 1)
++					WriteState=PG_STATE_HEADER;	
++					repeat_times++;
++					if(repeat_times>EFUSE_REPEAT_THRESHOLD_){
++						bContinual = _FALSE;
++						bResult = _FALSE;
++					}
++					#endif
++					
++					//RTPRINT(FEEPROM, EFUSE_PG, ("EFUSE PG_STATE_HEADER-2\n"));
++				}
++
++			}
++
++		}
++		//write data state
++		else if(WriteState==PG_STATE_DATA) 
++		{	//************  s1-1  *******************
++			//RTPRINT(FEEPROM, EFUSE_PG, ("EFUSE PG_STATE_DATA\n"));
++			badworden = 0x0f;
++			badworden = Efuse_WordEnableDataWrite(pAdapter,efuse_addr+1,target_pkt.word_en,target_pkt.data, bPseudoTest);	
++			if((badworden&0x0F)==0x0F)
++			{ //************  s1-1-A *******************
++				bContinual = _FALSE;
++			}
++			else
++			{//reorganize other pg packet //************  s1-1-B *******************
++				efuse_addr = efuse_addr + (2*target_word_cnts) +1;//next pg packet addr
++										
++				//===========================
++				target_pkt.offset = offset;
++				target_pkt.word_en= badworden;		
++				target_word_cnts =  Efuse_CalculateWordCnts(target_pkt.word_en); 
++				//===========================			
++				#if (EFUSE_ERROE_HANDLE == 1)
++				WriteState=PG_STATE_HEADER;	
++				repeat_times++;
++				if(repeat_times>EFUSE_REPEAT_THRESHOLD_){
++					bContinual = _FALSE;
++					bResult = _FALSE;
++				}
++				#endif
++				//RTPRINT(FEEPROM, EFUSE_PG, ("EFUSE PG_STATE_HEADER-3\n"));
++			}
++		}
++	}
++
++	if(efuse_addr  >= (EFUSE_REAL_CONTENT_LEN-EFUSE_OOB_PROTECT_BYTES))
++	{
++		//RT_TRACE(COMP_EFUSE, DBG_LOUD, ("hal_EfusePgPacketWrite_8192C(): efuse_addr(%#x) Out of size!!\n", efuse_addr));
++	}
++	//efuse_reg_ctrl(pAdapter,_FALSE);//power off
++	
++	return _TRUE;
++}
++
++static int 
++Hal_EfusePgPacketWrite_Pseudo(IN	PADAPTER	pAdapter, 
++					IN	u8 			offset,
++					IN	u8			word_en,
++					IN	u8			*data,
++					IN	BOOLEAN		bPseudoTest)
++{
++	int ret;
++	
++	ret = hal_EfusePgPacketWrite_8723(pAdapter, offset, word_en, data, bPseudoTest);
++
++	return ret;
++}
++
++static int
++Hal_EfusePgPacketWrite(IN	PADAPTER	pAdapter, 
++					IN	u8 			offset,
++					IN	u8			word_en,
++					IN	u8			*data,
++					IN	BOOLEAN		bPseudoTest)
++{
++	int	ret=0;
++
++	if(IS_HARDWARE_TYPE_8192C(pAdapter))
++	{
++		ret = hal_EfusePgPacketWrite_8192C(pAdapter, offset, word_en, data, bPseudoTest);
++	}
++	else if(IS_HARDWARE_TYPE_8723A(pAdapter))
++	{
++		ret = hal_EfusePgPacketWrite_8723(pAdapter, offset, word_en, data, bPseudoTest);
++	}
++
++	return ret;
++}
++
++static int 
++rtl8192c_Efuse_PgPacketWrite(IN	PADAPTER	pAdapter, 
++					IN	u8 			offset,
++					IN	u8			word_en,
++					IN	u8			*data,
++					IN	BOOLEAN		bPseudoTest)
++{
++	int	ret;
++
++	if(bPseudoTest)
++	{
++		ret = Hal_EfusePgPacketWrite_Pseudo(pAdapter, offset, word_en, data, bPseudoTest);
++	}
++	else
++	{
++		ret = Hal_EfusePgPacketWrite(pAdapter, offset, word_en, data, bPseudoTest);
++	}
++	return ret;
++}
++
++VOID
++rtl8192c_EfuseParseIDCode(
++	IN	PADAPTER	pAdapter,
++	IN	u8			*hwinfo
++	)
++{
++	EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(pAdapter);
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	u16			i,EEPROMId;
++	
++	// Checl 0x8129 again for making sure autoload status!!
++	EEPROMId = *((u16 *)&hwinfo[0]);
++	if( le16_to_cpu(EEPROMId) != RTL_EEPROM_ID)
++	{
++		DBG_8192C("EEPROM ID(%#x) is invalid!!\n", EEPROMId);
++		pEEPROM->bautoload_fail_flag = _TRUE;
++	}
++	else
++	{
++		pEEPROM->bautoload_fail_flag = _FALSE;
++	}
++
++	//RT_TRACE(COMP_INIT, DBG_LOUD, ("EEPROM ID = 0x%4x\n", EEPROMId));
++}
++
++void rtl8192c_read_chip_version(PADAPTER	pAdapter)
++{
++	HAL_DATA_TYPE	*pHalData	= GET_HAL_DATA(pAdapter);
++	pHalData->VersionID = rtl8192c_ReadChipVersion(pAdapter);
++}
++
++void hal_notch_filter_8192c(_adapter *adapter, bool enable)
++{
++	if (enable) {
++		DBG_871X("Enable notch filter\n");
++		rtw_write8(adapter, rOFDM0_RxDSP+1, rtw_read8(adapter, rOFDM0_RxDSP+1) | BIT1);
++	} else {
++		DBG_871X("Disable notch filter\n");
++		rtw_write8(adapter, rOFDM0_RxDSP+1, rtw_read8(adapter, rOFDM0_RxDSP+1) & ~BIT1);
++	}
++}
++
++void hal_reset_security_engine_8192c(_adapter * adapter)
++{
++	rtw_write8(adapter, 0x522, 0xFF);
++	rtw_write8(adapter, 0x21, 0x35);
++	rtw_usleep_os(300);
++	rtw_write8(adapter, 0x101, rtw_read8(adapter,0x101)&~0x02);
++	rtw_write8(adapter, 0x101, rtw_read8(adapter,0x101)|0x02);
++	rtw_write8(adapter, 0x21, 0x55);
++	rtw_write8(adapter, 0x522, 0x00);
++}
++
++s32 c2h_id_filter_ccx_8192c(u8 id)
++{
++	s32 ret = _FALSE;
++	if (id == C2H_CCX_TX_RPT)
++		ret = _TRUE;
++	
++	return ret;
++}
++
++static s32 c2h_handler_8192c(_adapter *padapter, struct c2h_evt_hdr *c2h_evt)
++{
++	s32 ret = _SUCCESS;
++	u8 i = 0;
++
++	if (c2h_evt == NULL) {
++		DBG_8192C("%s c2h_evt is NULL\n",__FUNCTION__);
++		ret = _FAIL;
++		goto exit;
++	}
++
++	switch (c2h_evt->id) {
++	case C2H_CCX_TX_RPT:
++		handle_txrpt_ccx_8192c(padapter, c2h_evt->payload);
++		break;
++	default:
++		ret = _FAIL;
++		break;
++	}
++
++exit:
++	return ret;
++}
++
++void rtl8192c_set_hal_ops(struct hal_ops *pHalFunc)
++{
++	pHalFunc->free_hal_data = &rtl8192c_free_hal_data;
++
++	pHalFunc->dm_init = &rtl8192c_init_dm_priv;
++	pHalFunc->dm_deinit = &rtl8192c_deinit_dm_priv;
++	pHalFunc->read_chip_version = &rtl8192c_read_chip_version;
++
++	pHalFunc->set_bwmode_handler = &PHY_SetBWMode8192C;
++	pHalFunc->set_channel_handler = &PHY_SwChnl8192C;
++
++	pHalFunc->hal_dm_watchdog = &rtl8192c_HalDmWatchDog;
++
++	pHalFunc->Add_RateATid = &rtl8192c_Add_RateATid;
++
++#ifdef CONFIG_ANTENNA_DIVERSITY
++	pHalFunc->AntDivBeforeLinkHandler = &SwAntDivBeforeLink8192C;
++	pHalFunc->AntDivCompareHandler = &SwAntDivCompare8192C;
++#endif
++
++	pHalFunc->read_bbreg = &rtl8192c_PHY_QueryBBReg;
++	pHalFunc->write_bbreg = &rtl8192c_PHY_SetBBReg;
++	pHalFunc->read_rfreg = &rtl8192c_PHY_QueryRFReg;
++	pHalFunc->write_rfreg = &rtl8192c_PHY_SetRFReg;
++
++	//Efuse related function
++	pHalFunc->EfusePowerSwitch = &rtl8192c_EfusePowerSwitch;
++	pHalFunc->ReadEFuse = &rtl8192c_ReadEFuse;
++	pHalFunc->EFUSEGetEfuseDefinition = &rtl8192c_EFUSE_GetEfuseDefinition;
++	pHalFunc->EfuseGetCurrentSize = &rtl8192c_EfuseGetCurrentSize;
++	pHalFunc->Efuse_PgPacketRead = &rtl8192c_Efuse_PgPacketRead;
++	pHalFunc->Efuse_PgPacketWrite = &rtl8192c_Efuse_PgPacketWrite;
++	pHalFunc->Efuse_WordEnableDataWrite = &rtl8192c_Efuse_WordEnableDataWrite;
++
++#ifdef DBG_CONFIG_ERROR_DETECT
++	pHalFunc->sreset_init_value = &sreset_init_value;
++	pHalFunc->sreset_reset_value = &sreset_reset_value;	
++	pHalFunc->silentreset = &sreset_reset;
++	pHalFunc->sreset_xmit_status_check = &rtl8192c_sreset_xmit_status_check;
++	pHalFunc->sreset_linked_status_check  = &rtl8192c_sreset_linked_status_check;
++	pHalFunc->sreset_get_wifi_status  = &sreset_get_wifi_status;
++	pHalFunc->sreset_inprogress= &sreset_inprogress;
++#endif
++
++#ifdef CONFIG_IOL
++	pHalFunc->IOL_exec_cmds_sync = &rtl8192c_IOL_exec_cmds_sync;
++#endif
++	pHalFunc->hal_notch_filter = &hal_notch_filter_8192c;
++	pHalFunc->hal_reset_security_engine = hal_reset_security_engine_8192c;
++
++	pHalFunc->c2h_handler = c2h_handler_8192c;
++	pHalFunc->c2h_id_filter_ccx = c2h_id_filter_ccx_8192c;
++}
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_mp.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_mp.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_mp.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_mp.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,1207 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _RTL8192C_MP_C_
++#ifdef CONFIG_MP_INCLUDED
++
++#include <drv_types.h>
++#include <rtw_mp.h>
++
++#ifdef CONFIG_RTL8192C
++#include <rtl8192c_hal.h>
++#endif
++
++
++
++s32 Hal_SetPowerTracking(PADAPTER padapter, u8 enable)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++
++
++	if (!netif_running(padapter->pnetdev)) {
++		RT_TRACE(_module_mp_, _drv_warning_, ("SetPowerTracking! Fail: interface not opened!\n"));
++		return _FAIL;
++	}
++
++	if (check_fwstate(&padapter->mlmepriv, WIFI_MP_STATE) == _FALSE) {
++		RT_TRACE(_module_mp_, _drv_warning_, ("SetPowerTracking! Fail: not in MP mode!\n"));
++		return _FAIL;
++	}
++
++	if (enable)
++		pdmpriv->TxPowerTrackControl = _TRUE;
++	else
++		pdmpriv->TxPowerTrackControl = _FALSE;
++
++	return _SUCCESS;
++}
++
++void Hal_GetPowerTracking(PADAPTER padapter, u8 *enable)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++
++
++	*enable = pdmpriv->TxPowerTrackControl;
++}
++
++static void Hal_disable_dm(PADAPTER padapter)
++{
++	u8 v8;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++
++
++	//3 1. disable firmware dynamic mechanism
++	// disable Power Training, Rate Adaptive
++	v8 = rtw_read8(padapter, REG_BCN_CTRL);
++	v8 &= ~EN_BCN_FUNCTION;
++	rtw_write8(padapter, REG_BCN_CTRL, v8);
++
++	//3 2. disable driver dynamic mechanism
++	// disable Dynamic Initial Gain
++	// disable High Power
++	// disable Power Tracking
++	Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, _FALSE);
++
++	// enable APK, LCK and IQK but disable power tracking
++	pdmpriv->TxPowerTrackControl = _FALSE;
++	Switch_DM_Func(padapter, DYNAMIC_FUNC_SS, _TRUE);
++}
++
++/*-----------------------------------------------------------------------------
++ * Function:	mpt_SwitchRfSetting
++ *
++ * Overview:	Change RF Setting when we siwthc channel/rate/BW for MP.
++ *
++ * Input:       IN	PADAPTER				pAdapter
++ *
++ * Output:      NONE
++ *
++ * Return:      NONE
++ *
++ * Revised History:
++ * When			Who		Remark
++ * 01/08/2009	MHC		Suggestion from SD3 Willis for 92S series.
++ * 01/09/2009	MHC		Add CCK modification for 40MHZ. Suggestion from SD3.
++ *
++ *---------------------------------------------------------------------------*/
++void Hal_mpt_SwitchRfSetting(PADAPTER pAdapter)
++{
++	HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
++	struct mp_priv *pmp = &pAdapter->mppriv;
++	u8 ChannelToSw = pmp->channel, eRFPath = RF_PATH_A;
++	u8 ulRateIdx = pmp->rateidx;
++	u8 ulbandwidth = pmp->bandwidth;
++	PMPT_CONTEXT	pMptCtx = &(pAdapter->mppriv.MptCtx);
++    BOOLEAN             bInteralPA = _FALSE;
++    u32				value = 0;
++
++#ifdef CONFIG_USB_HCI
++	if (IS_92C_SERIAL(pHalData->VersionID))
++	{
++		//92CE-VAU (92cu mCard)
++		if( BOARD_MINICARD == pHalData->BoardType)
++		{
++			if (ulRateIdx < MPT_RATE_6M)					// CCK rate
++			{
++				write_rfreg(pAdapter, 0, RF_SYN_G2, 0x0F400);
++			}
++			else 											//OFDM~MCS rate
++			{
++				write_rfreg(pAdapter, 0, RF_SYN_G2, 0x4F000);
++			}
++		}
++		else	//92CU dongle
++		{
++			if (ulRateIdx < MPT_RATE_6M)	// CCK rate
++			{
++				write_rfreg(pAdapter, 0, RF_SYN_G2, 0x0F400);
++			}
++			else if (ChannelToSw & BIT0)	// OFDM rate, odd number channel
++			{
++				write_rfreg(pAdapter, 0, RF_SYN_G2, 0x4F200);
++			}
++			else if (ChannelToSw == 4)	// OFDM rate, even number channel
++			{
++				write_rfreg(pAdapter, 0, RF_SYN_G2, 0x28200);
++				write_rfreg(pAdapter, 0, RF_SYN_G6, 0xe0004);
++				write_rfreg(pAdapter, 0, RF_SYN_G7, 0x709);
++				rtw_msleep_os(1);
++				write_rfreg(pAdapter, 0, RF_SYN_G7, 0x4B333);
++			}
++			else if(ChannelToSw == 10)	// OFDM rate, even number channel
++			{
++				write_rfreg(pAdapter, 0, RF_SYN_G2, 0x28000);
++				write_rfreg(pAdapter, 0, RF_SYN_G6, 0xe000A);
++				write_rfreg(pAdapter, 0, RF_SYN_G7, 0x709);
++				rtw_msleep_os(1);
++				write_rfreg(pAdapter, 0, RF_SYN_G7, 0x7B333);
++			}
++			else if(ChannelToSw == 12)	// OFDM rate, even number channel
++			{
++				write_rfreg(pAdapter, 0, RF_SYN_G2, 0x28200);
++				write_rfreg(pAdapter, 0, RF_SYN_G6, 0xe000C);
++				write_rfreg(pAdapter, 0, RF_SYN_G7, 0x50B);
++				rtw_msleep_os(1);
++				write_rfreg(pAdapter, 0, RF_SYN_G7, 0x4B333);
++			}
++			else
++			{
++				write_rfreg(pAdapter, 0, RF_SYN_G2, 0x4F200);
++			}
++		}
++	}
++	else	//88cu
++	{
++
++		//mcard interface
++
++		if( BOARD_MINICARD == pHalData->BoardType)
++		{
++			if (ulRateIdx < MPT_RATE_6M)	// CCK rate
++			{
++				write_rfreg(pAdapter, 0, RF_SYN_G2, 0x0F400);
++			}
++			else 	//OFDM~MCS rate
++			{
++				write_rfreg(pAdapter, 0, RF_SYN_G2, 0x4F200);
++			}
++
++			if(ChannelToSw == 6 || ChannelToSw == 8)
++			{
++				write_bbreg(pAdapter, rOFDM0_XAAGCCore1, bMaskByte0, 0x22);
++				write_bbreg(pAdapter, rOFDM0_XBAGCCore1, bMaskByte0, 0x22);
++				write_bbreg(pAdapter, rOFDM0_RxDetector1, bMaskByte0, 0x4F);
++			}
++			else
++			{
++				write_bbreg(pAdapter, rOFDM0_XAAGCCore1, bMaskByte0, 0x20);
++				write_bbreg(pAdapter, rOFDM0_XBAGCCore1, bMaskByte0, 0x20);
++				write_bbreg(pAdapter, rOFDM0_RxDetector1, bMaskByte0, pMptCtx->backup0xc30);
++			}
++		}
++		else
++		{
++			if (ulRateIdx < MPT_RATE_6M)	// CCK rate
++			{
++				write_rfreg(pAdapter, 0, RF_SYN_G2, 0x0F400);
++			}
++			else if (ChannelToSw & BIT0)	// OFDM rate, odd number channel
++			{
++				write_rfreg(pAdapter, 0, RF_SYN_G2, 0x4F200);
++			}
++			else
++			{
++				write_rfreg(pAdapter, 0, RF_SYN_G2, 0x4F000);
++			}
++		}
++	}
++
++#else	//PCI_INTERFACE
++
++	if (ulRateIdx < MPT_RATE_6M)	// CCK rate
++	{
++		write_rfreg(pAdapter, 0, RF_SYN_G2, 0x0F400);
++	}
++	else	//OFDM~MCS rate
++	{
++		write_rfreg(pAdapter, 0, RF_SYN_G2, 0x4F000);
++	}
++	//88CE
++	if(!IS_92C_SERIAL(pHalData->VersionID))
++	{
++		if(ChannelToSw == 6 || ChannelToSw == 8)
++		{
++			write_bbreg(pAdapter, rOFDM0_XAAGCCore1, bMaskByte0, 0x22);
++			write_bbreg(pAdapter, rOFDM0_XBAGCCore1, bMaskByte0, 0x22);
++			write_bbreg(pAdapter, rOFDM0_RxDetector1, bMaskByte0, 0x4F);
++		}
++		else
++		{
++			write_bbreg(pAdapter, rOFDM0_XAAGCCore1, bMaskByte0, pMptCtx->backup0xc50);
++			write_bbreg(pAdapter, rOFDM0_XBAGCCore1, bMaskByte0, pMptCtx->backup0xc58);
++			write_bbreg(pAdapter, rOFDM0_RxDetector1, bMaskByte0, pMptCtx->backup0xc30);
++		}
++	 }
++
++#endif //CONFIG_USB_HCI
++
++
++}
++/*---------------------------hal\rtl8192c\MPT_Phy.c---------------------------*/
++
++/*---------------------------hal\rtl8192c\MPT_HelperFunc.c---------------------------*/
++void Hal_MPT_CCKTxPowerAdjust(PADAPTER Adapter, BOOLEAN bInCH14)
++{
++	u32		TempVal = 0, TempVal2 = 0, TempVal3 = 0;
++	u32		CurrCCKSwingVal = 0, CCKSwingIndex = 12;
++	u8		i;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++
++
++	// get current cck swing value and check 0xa22 & 0xa23 later to match the table.
++	CurrCCKSwingVal = read_bbreg(Adapter, rCCK0_TxFilter1, bMaskHWord);
++
++	if (!bInCH14)
++	{
++		// Readback the current bb cck swing value and compare with the table to
++		// get the current swing index
++		for (i = 0; i < CCK_TABLE_SIZE; i++)
++		{
++			if (((CurrCCKSwingVal&0xff) == (u32)CCKSwingTable_Ch1_Ch13[i][0]) &&
++				(((CurrCCKSwingVal&0xff00)>>8) == (u32)CCKSwingTable_Ch1_Ch13[i][1]))
++			{
++				CCKSwingIndex = i;
++//				RT_TRACE(COMP_INIT, DBG_LOUD,("Ch1~13, Current reg0x%x = 0x%lx, CCKSwingIndex=0x%x\n",
++//					(rCCK0_TxFilter1+2), CurrCCKSwingVal, CCKSwingIndex));
++				break;
++			}
++		}
++
++		//Write 0xa22 0xa23
++		TempVal = CCKSwingTable_Ch1_Ch13[CCKSwingIndex][0] +
++				(CCKSwingTable_Ch1_Ch13[CCKSwingIndex][1]<<8) ;
++
++
++		//Write 0xa24 ~ 0xa27
++		TempVal2 = 0;
++		TempVal2 = CCKSwingTable_Ch1_Ch13[CCKSwingIndex][2] +
++				(CCKSwingTable_Ch1_Ch13[CCKSwingIndex][3]<<8) +
++				(CCKSwingTable_Ch1_Ch13[CCKSwingIndex][4]<<16 )+
++				(CCKSwingTable_Ch1_Ch13[CCKSwingIndex][5]<<24);
++
++		//Write 0xa28  0xa29
++		TempVal3 = 0;
++		TempVal3 = CCKSwingTable_Ch1_Ch13[CCKSwingIndex][6] +
++				(CCKSwingTable_Ch1_Ch13[CCKSwingIndex][7]<<8) ;
++	}
++	else
++	{
++		for (i = 0; i < CCK_TABLE_SIZE; i++)
++		{
++			if (((CurrCCKSwingVal&0xff) == (u32)CCKSwingTable_Ch14[i][0]) &&
++				(((CurrCCKSwingVal&0xff00)>>8) == (u32)CCKSwingTable_Ch14[i][1]))
++			{
++				CCKSwingIndex = i;
++//				RT_TRACE(COMP_INIT, DBG_LOUD,("Ch14, Current reg0x%x = 0x%lx, CCKSwingIndex=0x%x\n",
++//					(rCCK0_TxFilter1+2), CurrCCKSwingVal, CCKSwingIndex));
++				break;
++			}
++		}
++
++		//Write 0xa22 0xa23
++		TempVal = CCKSwingTable_Ch14[CCKSwingIndex][0] +
++				(CCKSwingTable_Ch14[CCKSwingIndex][1]<<8) ;
++
++		//Write 0xa24 ~ 0xa27
++		TempVal2 = 0;
++		TempVal2 = CCKSwingTable_Ch14[CCKSwingIndex][2] +
++				(CCKSwingTable_Ch14[CCKSwingIndex][3]<<8) +
++				(CCKSwingTable_Ch14[CCKSwingIndex][4]<<16 )+
++				(CCKSwingTable_Ch14[CCKSwingIndex][5]<<24);
++
++		//Write 0xa28  0xa29
++		TempVal3 = 0;
++		TempVal3 = CCKSwingTable_Ch14[CCKSwingIndex][6] +
++				(CCKSwingTable_Ch14[CCKSwingIndex][7]<<8) ;
++	}
++
++	write_bbreg(Adapter, rCCK0_TxFilter1, bMaskHWord, TempVal);
++	write_bbreg(Adapter, rCCK0_TxFilter2, bMaskDWord, TempVal2);
++	write_bbreg(Adapter, rCCK0_DebugPort, bMaskLWord, TempVal3);
++}
++
++void Hal_MPT_CCKTxPowerAdjustbyIndex(PADAPTER pAdapter, BOOLEAN beven)
++{
++	s32		TempCCk;
++	u8		CCK_index, CCK_index_old;
++	u8		Action = 0;	//0: no action, 1: even->odd, 2:odd->even
++	u8		TimeOut = 100;
++	s32		i = 0;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	PMPT_CONTEXT	pMptCtx = &pAdapter->mppriv.MptCtx;
++
++
++	if (!IS_92C_SERIAL(pHalData->VersionID))
++		return;
++#if 0
++	while(PlatformAtomicExchange(&Adapter->IntrCCKRefCount, TRUE) == TRUE)
++	{
++		PlatformSleepUs(100);
++		TimeOut--;
++		if(TimeOut <= 0)
++		{
++			RTPRINT(FINIT, INIT_TxPower,
++			 ("!!!MPT_CCKTxPowerAdjustbyIndex Wait for check CCK gain index too long!!!\n" ));
++			break;
++		}
++	}
++#endif
++	if (beven && !pMptCtx->bMptIndexEven)	//odd->even
++	{
++		Action = 2;
++		pMptCtx->bMptIndexEven = _TRUE;
++	}
++	else if (!beven && pMptCtx->bMptIndexEven)	//even->odd
++	{
++		Action = 1;
++		pMptCtx->bMptIndexEven = _FALSE;
++	}
++
++	if (Action != 0)
++	{
++		//Query CCK default setting From 0xa24
++		TempCCk = read_bbreg(pAdapter, rCCK0_TxFilter2, bMaskDWord) & bMaskCCK;
++		for (i = 0; i < CCK_TABLE_SIZE; i++)
++		{
++			if (pHalData->dmpriv.bCCKinCH14)
++			{
++				if (_rtw_memcmp((void*)&TempCCk, (void*)&CCKSwingTable_Ch14[i][2], 4) == _TRUE)
++				{
++					CCK_index_old = (u8) i;
++//					RTPRINT(FINIT, INIT_TxPower,("MPT_CCKTxPowerAdjustbyIndex: Initial reg0x%x = 0x%lx, CCK_index=0x%x, ch 14 %d\n",
++//						rCCK0_TxFilter2, TempCCk, CCK_index_old, pHalData->bCCKinCH14));
++					break;
++				}
++			}
++			else
++			{
++				if (_rtw_memcmp((void*)&TempCCk, (void*)&CCKSwingTable_Ch1_Ch13[i][2], 4) == _TRUE)
++				{
++					CCK_index_old = (u8) i;
++//					RTPRINT(FINIT, INIT_TxPower,("MPT_CCKTxPowerAdjustbyIndex: Initial reg0x%x = 0x%lx, CCK_index=0x%x, ch14 %d\n",
++//						rCCK0_TxFilter2, TempCCk, CCK_index_old, pHalData->bCCKinCH14));
++					break;
++				}
++			}
++		}
++
++		if (Action == 1)
++			CCK_index = CCK_index_old - 1;
++		else
++			CCK_index = CCK_index_old + 1;
++
++//		RTPRINT(FINIT, INIT_TxPower,("MPT_CCKTxPowerAdjustbyIndex: new CCK_index=0x%x\n",
++//			 CCK_index));
++
++		//Adjust CCK according to gain index
++		if (!pHalData->dmpriv.bCCKinCH14) {
++			rtw_write8(pAdapter, 0xa22, CCKSwingTable_Ch1_Ch13[CCK_index][0]);
++			rtw_write8(pAdapter, 0xa23, CCKSwingTable_Ch1_Ch13[CCK_index][1]);
++			rtw_write8(pAdapter, 0xa24, CCKSwingTable_Ch1_Ch13[CCK_index][2]);
++			rtw_write8(pAdapter, 0xa25, CCKSwingTable_Ch1_Ch13[CCK_index][3]);
++			rtw_write8(pAdapter, 0xa26, CCKSwingTable_Ch1_Ch13[CCK_index][4]);
++			rtw_write8(pAdapter, 0xa27, CCKSwingTable_Ch1_Ch13[CCK_index][5]);
++			rtw_write8(pAdapter, 0xa28, CCKSwingTable_Ch1_Ch13[CCK_index][6]);
++			rtw_write8(pAdapter, 0xa29, CCKSwingTable_Ch1_Ch13[CCK_index][7]);
++		} else {
++			rtw_write8(pAdapter, 0xa22, CCKSwingTable_Ch14[CCK_index][0]);
++			rtw_write8(pAdapter, 0xa23, CCKSwingTable_Ch14[CCK_index][1]);
++			rtw_write8(pAdapter, 0xa24, CCKSwingTable_Ch14[CCK_index][2]);
++			rtw_write8(pAdapter, 0xa25, CCKSwingTable_Ch14[CCK_index][3]);
++			rtw_write8(pAdapter, 0xa26, CCKSwingTable_Ch14[CCK_index][4]);
++			rtw_write8(pAdapter, 0xa27, CCKSwingTable_Ch14[CCK_index][5]);
++			rtw_write8(pAdapter, 0xa28, CCKSwingTable_Ch14[CCK_index][6]);
++			rtw_write8(pAdapter, 0xa29, CCKSwingTable_Ch14[CCK_index][7]);
++		}
++	}
++#if 0
++	RTPRINT(FINIT, INIT_TxPower,
++	("MPT_CCKTxPowerAdjustbyIndex 0xa20=%x\n", PlatformEFIORead4Byte(Adapter, 0xa20)));
++
++	PlatformAtomicExchange(&Adapter->IntrCCKRefCount, FALSE);
++#endif
++}
++/*---------------------------hal\rtl8192c\MPT_HelperFunc.c---------------------------*/
++
++/*
++ * SetChannel
++ * Description
++ *	Use H2C command to change channel,
++ *	not only modify rf register, but also other setting need to be done.
++ */
++void Hal_SetChannel(PADAPTER pAdapter)
++{
++#if 0
++	struct mp_priv *pmp = &pAdapter->mppriv;
++
++//	SelectChannel(pAdapter, pmp->channel);
++	set_channel_bwmode(pAdapter, pmp->channel, pmp->channel_offset, pmp->bandwidth);
++#else
++	u8 		eRFPath;
++
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	struct mp_priv	*pmp = &pAdapter->mppriv;
++	u8		channel = pmp->channel;
++	u8		bandwidth = pmp->bandwidth;
++	u8		rate = pmp->rateidx;
++
++
++	// set RF channel register
++	for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++)
++	{
++      if(IS_HARDWARE_TYPE_8192D(pAdapter))
++			_write_rfreg(pAdapter, (RF_RADIO_PATH_E)eRFPath, rRfChannel, 0xFF, channel);
++		else
++		_write_rfreg(pAdapter, eRFPath, rRfChannel, 0x3FF, channel);
++	}
++	Hal_mpt_SwitchRfSetting(pAdapter);
++
++	SelectChannel(pAdapter, channel);
++
++	if (pHalData->CurrentChannel == 14 && !pHalData->dmpriv.bCCKinCH14) {
++		pHalData->dmpriv.bCCKinCH14 = _TRUE;
++		Hal_MPT_CCKTxPowerAdjust(pAdapter, pHalData->dmpriv.bCCKinCH14);
++	}
++	else if (pHalData->CurrentChannel != 14 && pHalData->dmpriv.bCCKinCH14) {
++		pHalData->dmpriv.bCCKinCH14 = _FALSE;
++		Hal_MPT_CCKTxPowerAdjust(pAdapter, pHalData->dmpriv.bCCKinCH14);
++	}
++
++#endif
++}
++
++/*
++ * Notice
++ *	Switch bandwitdth may change center frequency(channel)
++ */
++void Hal_SetBandwidth(PADAPTER pAdapter)
++{
++	struct mp_priv *pmp = &pAdapter->mppriv;
++
++
++	SetBWMode(pAdapter, pmp->bandwidth, pmp->prime_channel_offset);
++	Hal_mpt_SwitchRfSetting(pAdapter);
++}
++
++void Hal_SetCCKTxPower(PADAPTER pAdapter, u8 *TxPower)
++{
++	u32 tmpval = 0;
++
++
++	// rf-A cck tx power
++	write_bbreg(pAdapter, rTxAGC_A_CCK1_Mcs32, bMaskByte1, TxPower[RF_PATH_A]);
++	tmpval = (TxPower[RF_PATH_A]<<16) | (TxPower[RF_PATH_A]<<8) | TxPower[RF_PATH_A];
++	write_bbreg(pAdapter, rTxAGC_B_CCK11_A_CCK2_11, 0xffffff00, tmpval);
++
++	// rf-B cck tx power
++	write_bbreg(pAdapter, rTxAGC_B_CCK11_A_CCK2_11, bMaskByte0, TxPower[RF_PATH_B]);
++	tmpval = (TxPower[RF_PATH_B]<<16) | (TxPower[RF_PATH_B]<<8) | TxPower[RF_PATH_B];
++	write_bbreg(pAdapter, rTxAGC_B_CCK1_55_Mcs32, 0xffffff00, tmpval);
++
++	RT_TRACE(_module_mp_, _drv_notice_,
++		 ("-SetCCKTxPower: A[0x%02x] B[0x%02x]\n",
++		  TxPower[RF_PATH_A], TxPower[RF_PATH_B]));
++}
++
++void Hal_SetOFDMTxPower(PADAPTER pAdapter, u8 *TxPower)
++{
++	u32 TxAGC = 0;
++	u8 tmpval = 0;
++	PMPT_CONTEXT	pMptCtx = &pAdapter->mppriv.MptCtx;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++
++
++	// HT Tx-rf(A)
++	tmpval = TxPower[RF_PATH_A];
++	TxAGC = (tmpval<<24) | (tmpval<<16) | (tmpval<<8) | tmpval;
++
++	write_bbreg(pAdapter, rTxAGC_A_Rate18_06, bMaskDWord, TxAGC);
++	write_bbreg(pAdapter, rTxAGC_A_Rate54_24, bMaskDWord, TxAGC);
++	write_bbreg(pAdapter, rTxAGC_A_Mcs03_Mcs00, bMaskDWord, TxAGC);
++	write_bbreg(pAdapter, rTxAGC_A_Mcs07_Mcs04, bMaskDWord, TxAGC);
++	write_bbreg(pAdapter, rTxAGC_A_Mcs11_Mcs08, bMaskDWord, TxAGC);
++	write_bbreg(pAdapter, rTxAGC_A_Mcs15_Mcs12, bMaskDWord, TxAGC);
++
++	// HT Tx-rf(B)
++	tmpval = TxPower[RF_PATH_B];
++	TxAGC = (tmpval<<24) | (tmpval<<16) | (tmpval<<8) | tmpval;
++
++	write_bbreg(pAdapter, rTxAGC_B_Rate18_06, bMaskDWord, TxAGC);
++	write_bbreg(pAdapter, rTxAGC_B_Rate54_24, bMaskDWord, TxAGC);
++	write_bbreg(pAdapter, rTxAGC_B_Mcs03_Mcs00, bMaskDWord, TxAGC);
++	write_bbreg(pAdapter, rTxAGC_B_Mcs07_Mcs04, bMaskDWord, TxAGC);
++	write_bbreg(pAdapter, rTxAGC_B_Mcs11_Mcs08, bMaskDWord, TxAGC);
++	write_bbreg(pAdapter, rTxAGC_B_Mcs15_Mcs12, bMaskDWord, TxAGC);
++
++	RT_TRACE(_module_mp_, _drv_notice_,
++		 ("-SetOFDMTxPower: A[0x%02x] B[0x%02x]\n",
++		  TxPower[RF_PATH_A], TxPower[RF_PATH_B]));
++}
++
++void Hal_SetAntennaPathPower(PADAPTER pAdapter)
++{
++	HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
++	u8 TxPowerLevel[MAX_RF_PATH_NUMS];
++	u8 rfPath;
++
++	TxPowerLevel[RF_PATH_A] = pAdapter->mppriv.txpoweridx;
++	TxPowerLevel[RF_PATH_B] = pAdapter->mppriv.txpoweridx_b;
++
++	switch (pAdapter->mppriv.antenna_tx)
++	{
++		case ANTENNA_A:
++		default:
++			rfPath = RF_PATH_A;
++			break;
++		case ANTENNA_B:
++			rfPath = RF_PATH_B;
++			break;
++		case ANTENNA_C:
++			rfPath = RF_PATH_C;
++			break;
++	}
++
++	switch (pHalData->rf_chip)
++	{
++		case RF_8225:
++		case RF_8256:
++		case RF_6052:
++			Hal_SetCCKTxPower(pAdapter, TxPowerLevel);
++			if (pAdapter->mppriv.rateidx < MPT_RATE_6M)	// CCK rate
++				Hal_MPT_CCKTxPowerAdjustbyIndex(pAdapter, TxPowerLevel[rfPath]%2 == 0);
++			Hal_SetOFDMTxPower(pAdapter, TxPowerLevel);
++			break;
++
++		default:
++			break;
++	}
++}
++
++void Hal_SetTxPower(PADAPTER pAdapter)
++{
++	HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
++	u8 TxPower = pAdapter->mppriv.txpoweridx;
++	u8 TxPowerLevel[MAX_RF_PATH_NUMS];
++	u8 rf, rfPath;
++
++	for (rf = 0; rf < MAX_RF_PATH_NUMS; rf++) {
++		TxPowerLevel[rf] = TxPower;
++	}
++
++	switch (pAdapter->mppriv.antenna_tx)
++	{
++		case ANTENNA_A:
++		default:
++			rfPath = RF_PATH_A;
++			break;
++		case ANTENNA_B:
++			rfPath = RF_PATH_B;
++			break;
++		case ANTENNA_C:
++			rfPath = RF_PATH_C;
++			break;
++	}
++
++	switch (pHalData->rf_chip)
++	{
++		// 2008/09/12 MH Test only !! We enable the TX power tracking for MP!!!!!
++		// We should call normal driver API later!!
++		case RF_8225:
++		case RF_8256:
++		case RF_6052:
++			Hal_SetCCKTxPower(pAdapter, TxPowerLevel);
++			if (pAdapter->mppriv.rateidx < MPT_RATE_6M)	// CCK rate
++				Hal_MPT_CCKTxPowerAdjustbyIndex(pAdapter, TxPowerLevel[rfPath]%2 == 0);
++			Hal_SetOFDMTxPower(pAdapter, TxPowerLevel);
++			break;
++
++		default:
++			break;
++	}
++
++//	SetCCKTxPower(pAdapter, TxPower);
++//	SetOFDMTxPower(pAdapter, TxPower);
++}
++
++void Hal_SetTxAGCOffset(PADAPTER pAdapter, u32 ulTxAGCOffset)
++{
++	u32 TxAGCOffset_B, TxAGCOffset_C, TxAGCOffset_D,tmpAGC;
++
++	TxAGCOffset_B = (ulTxAGCOffset&0x000000ff);
++	TxAGCOffset_C = ((ulTxAGCOffset&0x0000ff00)>>8);
++	TxAGCOffset_D = ((ulTxAGCOffset&0x00ff0000)>>16);
++
++	tmpAGC = (TxAGCOffset_D<<8 | TxAGCOffset_C<<4 | TxAGCOffset_B);
++	write_bbreg(pAdapter, rFPGA0_TxGainStage,
++			(bXBTxAGC|bXCTxAGC|bXDTxAGC), tmpAGC);
++}
++
++void Hal_SetDataRate(PADAPTER pAdapter)
++{
++	Hal_mpt_SwitchRfSetting(pAdapter);
++}
++
++#if  !defined (CONFIG_RTL8192C)  &&  !defined (CONFIG_RTL8192D)
++/*------------------------------Define structure----------------------------*/
++typedef struct _R_ANTENNA_SELECT_OFDM {
++	u32	r_tx_antenna:4;
++	u32	r_ant_l:4;
++	u32	r_ant_non_ht:4;
++	u32	r_ant_ht1:4;
++	u32	r_ant_ht2:4;
++	u32	r_ant_ht_s1:4;
++	u32	r_ant_non_ht_s1:4;
++	u32	OFDM_TXSC:2;
++	u32	Reserved:2;
++}R_ANTENNA_SELECT_OFDM;
++
++typedef struct _R_ANTENNA_SELECT_CCK {
++	u8	r_cckrx_enable_2:2;
++	u8	r_cckrx_enable:2;
++	u8	r_ccktx_enable:4;
++}R_ANTENNA_SELECT_CCK;
++#endif
++
++void Hal_SetAntenna(PADAPTER pAdapter)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++
++	R_ANTENNA_SELECT_OFDM *p_ofdm_tx;	/* OFDM Tx register */
++	R_ANTENNA_SELECT_CCK *p_cck_txrx;
++
++	u8	r_rx_antenna_ofdm = 0, r_ant_select_cck_val = 0;
++	u8	chgTx = 0, chgRx = 0;
++	u32	r_ant_sel_cck_val = 0, r_ant_select_ofdm_val = 0, r_ofdm_tx_en_val = 0;
++
++
++	p_ofdm_tx = (R_ANTENNA_SELECT_OFDM *)&r_ant_select_ofdm_val;
++	p_cck_txrx = (R_ANTENNA_SELECT_CCK *)&r_ant_select_cck_val;
++
++	p_ofdm_tx->r_ant_ht1	= 0x1;
++	p_ofdm_tx->r_ant_ht2	= 0x2;	// Second TX RF path is A
++	p_ofdm_tx->r_ant_non_ht = 0x3;	// 0x1+0x2=0x3
++
++	switch (pAdapter->mppriv.antenna_tx)
++	{
++		case ANTENNA_A:
++			p_ofdm_tx->r_tx_antenna		= 0x1;
++			r_ofdm_tx_en_val		= 0x1;
++			p_ofdm_tx->r_ant_l 		= 0x1;
++			p_ofdm_tx->r_ant_ht_s1 		= 0x1;
++			p_ofdm_tx->r_ant_non_ht_s1 	= 0x1;
++			p_cck_txrx->r_ccktx_enable	= 0x8;
++			chgTx = 1;
++
++			// From SD3 Willis suggestion !!! Set RF A=TX and B as standby
++//			if (IS_HARDWARE_TYPE_8192S(pAdapter))
++			{
++			write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 2);
++			write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 1);
++			r_ofdm_tx_en_val		= 0x3;
++
++			// Power save
++			//cosa r_ant_select_ofdm_val = 0x11111111;
++
++			// We need to close RFB by SW control
++			if (pHalData->rf_type == RF_2T2R)
++			{
++				PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 0);
++				PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 1);
++				PHY_SetBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT10, 0);
++				PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 1);
++				PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 0);
++			}
++			}
++			break;
++
++		case ANTENNA_B:
++			p_ofdm_tx->r_tx_antenna		= 0x2;
++			r_ofdm_tx_en_val		= 0x2;
++			p_ofdm_tx->r_ant_l 		= 0x2;
++			p_ofdm_tx->r_ant_ht_s1 		= 0x2;
++			p_ofdm_tx->r_ant_non_ht_s1 	= 0x2;
++			p_cck_txrx->r_ccktx_enable	= 0x4;
++			chgTx = 1;
++
++			// From SD3 Willis suggestion !!! Set RF A as standby
++			//if (IS_HARDWARE_TYPE_8192S(pAdapter))
++			{
++			PHY_SetBBReg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 1);
++			PHY_SetBBReg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 2);
++//			r_ofdm_tx_en_val		= 0x3;
++
++			// Power save
++			//cosa r_ant_select_ofdm_val = 0x22222222;
++
++			// 2008/10/31 MH From SD3 Willi's suggestion. We must read RF 1T table.
++			// 2009/01/08 MH From Sd3 Willis. We need to close RFA by SW control
++			if (pHalData->rf_type == RF_2T2R || pHalData->rf_type == RF_1T2R)
++			{
++				PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 1);
++				PHY_SetBBReg(pAdapter, rFPGA0_XA_RFInterfaceOE, BIT10, 0);
++				PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 0);
++//				PHY_SetBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT10, 0);
++				PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 0);
++				PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 1);
++			}
++			}
++		break;
++
++		case ANTENNA_AB:	// For 8192S
++			p_ofdm_tx->r_tx_antenna		= 0x3;
++			r_ofdm_tx_en_val		= 0x3;
++			p_ofdm_tx->r_ant_l 		= 0x3;
++			p_ofdm_tx->r_ant_ht_s1 		= 0x3;
++			p_ofdm_tx->r_ant_non_ht_s1 	= 0x3;
++			p_cck_txrx->r_ccktx_enable	= 0xC;
++			chgTx = 1;
++
++			// From SD3 Willis suggestion !!! Set RF B as standby
++			//if (IS_HARDWARE_TYPE_8192S(pAdapter))
++			{
++			PHY_SetBBReg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 2);
++			PHY_SetBBReg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 2);
++
++			// Disable Power save
++			//cosa r_ant_select_ofdm_val = 0x3321333;
++#if 0
++			// 2008/10/31 MH From SD3 Willi's suggestion. We must read RFA 2T table.
++			if ((pHalData->VersionID == VERSION_8192S_ACUT)) // For RTL8192SU A-Cut only, by Roger, 2008.11.07.
++			{
++				mpt_RFConfigFromPreParaArrary(pAdapter, 1, RF_PATH_A);
++			}
++#endif
++			// 2009/01/08 MH From Sd3 Willis. We need to enable RFA/B by SW control
++			if (pHalData->rf_type == RF_2T2R)
++			{
++				PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 0);
++				PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 0);
++//				PHY_SetBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT10, 0);
++				PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 1);
++				PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 1);
++			}
++			}
++			break;
++
++		default:
++			break;
++	}
++
++	//
++	// r_rx_antenna_ofdm, bit0=A, bit1=B, bit2=C, bit3=D
++	// r_cckrx_enable : CCK default, 0=A, 1=B, 2=C, 3=D
++	// r_cckrx_enable_2 : CCK option, 0=A, 1=B, 2=C, 3=D
++	//
++	switch (pAdapter->mppriv.antenna_rx)
++	{
++		case ANTENNA_A:
++			r_rx_antenna_ofdm 		= 0x1;	// A
++			p_cck_txrx->r_cckrx_enable 	= 0x0;	// default: A
++			p_cck_txrx->r_cckrx_enable_2	= 0x0;	// option: A
++			chgRx = 1;
++			break;
++
++		case ANTENNA_B:
++			r_rx_antenna_ofdm 		= 0x2;	// B
++			p_cck_txrx->r_cckrx_enable 	= 0x1;	// default: B
++			p_cck_txrx->r_cckrx_enable_2	= 0x1;	// option: B
++			chgRx = 1;
++			break;
++
++		case ANTENNA_AB:
++			r_rx_antenna_ofdm 		= 0x3;	// AB
++			p_cck_txrx->r_cckrx_enable 	= 0x0;	// default:A
++			p_cck_txrx->r_cckrx_enable_2	= 0x1;	// option:B
++			chgRx = 1;
++			break;
++
++		default:
++			break;
++	}
++
++	if (chgTx && chgRx)
++	{
++		switch(pHalData->rf_chip)
++		{
++			case RF_8225:
++			case RF_8256:
++			case RF_6052:
++				//r_ant_sel_cck_val = r_ant_select_cck_val;
++				PHY_SetBBReg(pAdapter, rFPGA1_TxInfo, 0x7fffffff, r_ant_select_ofdm_val);	//OFDM Tx
++				PHY_SetBBReg(pAdapter, rFPGA0_TxInfo, 0x0000000f, r_ofdm_tx_en_val);		//OFDM Tx
++				PHY_SetBBReg(pAdapter, rOFDM0_TRxPathEnable, 0x0000000f, r_rx_antenna_ofdm);	//OFDM Rx
++				PHY_SetBBReg(pAdapter, rOFDM1_TRxPathEnable, 0x0000000f, r_rx_antenna_ofdm);	//OFDM Rx
++				PHY_SetBBReg(pAdapter, rCCK0_AFESetting, bMaskByte3, r_ant_select_cck_val);//r_ant_sel_cck_val);		//CCK TxRx
++
++				break;
++
++			default:
++				break;
++		}
++	}
++
++	RT_TRACE(_module_mp_, _drv_notice_, ("-SwitchAntenna: finished\n"));
++}
++
++s32 Hal_SetThermalMeter(PADAPTER pAdapter, u8 target_ther)
++{
++	HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
++
++
++	if (!netif_running(pAdapter->pnetdev)) {
++		RT_TRACE(_module_mp_, _drv_warning_, ("SetThermalMeter! Fail: interface not opened!\n"));
++		return _FAIL;
++	}
++
++	if (check_fwstate(&pAdapter->mlmepriv, WIFI_MP_STATE) == _FALSE) {
++		RT_TRACE(_module_mp_, _drv_warning_, ("SetThermalMeter: Fail! not in MP mode!\n"));
++		return _FAIL;
++	}
++
++	target_ther &= 0xff;
++	if (target_ther < 0x07)
++		target_ther = 0x07;
++	else if (target_ther > 0x1d)
++		target_ther = 0x1d;
++
++	pHalData->EEPROMThermalMeter = target_ther;
++
++	return _SUCCESS;
++}
++
++void Hal_TriggerRFThermalMeter(PADAPTER pAdapter)
++{
++  
++	write_rfreg(pAdapter, RF_PATH_A, RF_T_METER, 0x60);	// 0x24: RF Reg[6:5]
++
++//	RT_TRACE(_module_mp_,_drv_alert_, ("TriggerRFThermalMeter() finished.\n" ));
++}
++
++u8 Hal_ReadRFThermalMeter(PADAPTER pAdapter)
++{
++	u32 ThermalValue = 0;
++
++	ThermalValue = _read_rfreg(pAdapter, RF_PATH_A, RF_T_METER, 0x1F);	// 0x24: RF Reg[4:0]
++//	RT_TRACE(_module_mp_, _drv_alert_, ("ThermalValue = 0x%x\n", ThermalValue));
++	return (u8)ThermalValue;
++}
++
++void Hal_GetThermalMeter(PADAPTER pAdapter, u8 *value)
++{
++#if 0
++	fw_cmd(pAdapter, IOCMD_GET_THERMAL_METER);
++	rtw_msleep_os(1000);
++	fw_cmd_data(pAdapter, value, 1);
++	*value &= 0xFF;
++#else
++
++	Hal_TriggerRFThermalMeter(pAdapter);
++	rtw_msleep_os(1000);
++	*value = Hal_ReadRFThermalMeter(pAdapter);
++#endif
++}
++
++void Hal_SetSingleCarrierTx(PADAPTER pAdapter, u8 bStart)
++{
++    HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
++	pAdapter->mppriv.MptCtx.bSingleCarrier = bStart;
++	if (bStart)// Start Single Carrier.
++	{
++		RT_TRACE(_module_mp_,_drv_alert_, ("SetSingleCarrierTx: test start\n"));
++		// 1. if OFDM block on?
++		if(!read_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn))
++			write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, bEnable);//set OFDM block on
++
++		{
++		// 2. set CCK test mode off, set to CCK normal mode
++		write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, bDisable);
++		// 3. turn on scramble setting
++		write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable);
++         }
++		// 4. Turn On Single Carrier Tx and turn off the other test modes.
++		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable);
++		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bEnable);
++		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable);
++#ifdef CONFIG_RTL8192C
++		// 5. Disable TX power saving at STF & LLTF
++		write_bbreg(pAdapter, rOFDM1_LSTF, BIT22, 1);
++#endif
++	}
++	else// Stop Single Carrier.
++	{
++		RT_TRACE(_module_mp_,_drv_alert_, ("SetSingleCarrierTx: test stop\n"));
++
++		// Turn off all test modes.
++		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable);
++		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable);
++		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable);
++#ifdef CONFIG_RTL8192C
++		// Cancel disable TX power saving at STF&LLTF
++		write_bbreg(pAdapter, rOFDM1_LSTF, BIT22, 0);
++#endif
++		//Delay 10 ms //delay_ms(10);
++		rtw_msleep_os(10);
++
++		//BB Reset
++		write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0);
++		write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1);
++	}
++}
++
++
++void Hal_SetSingleToneTx(PADAPTER pAdapter, u8 bStart)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	BOOLEAN		is92C = IS_92C_SERIAL(pHalData->VersionID);
++
++	u8 rfPath;
++
++	switch (pAdapter->mppriv.antenna_tx)
++	{
++		case ANTENNA_A:
++		default:
++			rfPath = RF_PATH_A;
++			break;
++		case ANTENNA_B:
++			rfPath = RF_PATH_B;
++			break;
++		case ANTENNA_C:
++			rfPath = RF_PATH_C;
++			break;
++	}
++
++	pAdapter->mppriv.MptCtx.bSingleTone = bStart;
++	if (bStart)// Start Single Tone.
++	{
++		RT_TRACE(_module_mp_,_drv_alert_, ("SetSingleToneTx: test start\n"));
++		write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, 0x0);
++		write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x0);
++
++		if (is92C)
++       		 {
++			_write_rfreg(pAdapter, RF_PATH_A, 0x21, BIT19, 0x01);
++			rtw_usleep_os(100);
++			if (rfPath == RF_PATH_A)
++				write_rfreg(pAdapter, RF_PATH_B, 0x00, 0x10000); // PAD all on.
++			else if (rfPath == RF_PATH_B)
++				write_rfreg(pAdapter, RF_PATH_A, 0x00, 0x10000); // PAD all on.
++		} else {
++			write_rfreg(pAdapter, rfPath, 0x21, 0xd4000);
++			rtw_usleep_os(100);
++		}
++		
++		write_rfreg(pAdapter, rfPath, 0x00, 0x2001f); // PAD all on.
++		rtw_usleep_os(100);
++	}
++	else// Stop Single Tone.
++	{
++		RT_TRACE(_module_mp_,_drv_alert_, ("SetSingleToneTx: test stop\n"));
++		write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, 0x1);
++		write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x1);
++
++		if (is92C) {
++			_write_rfreg(pAdapter, RF_PATH_A, 0x21, BIT19, 0x00);
++			rtw_usleep_os(100);
++			write_rfreg(pAdapter, RF_PATH_A, 0x00, 0x32d75); // PAD all on.
++			write_rfreg(pAdapter, RF_PATH_B, 0x00, 0x32d75); // PAD all on.
++			rtw_usleep_os(100);
++		} else {
++			write_rfreg(pAdapter, rfPath, 0x21, 0x54000);
++			rtw_usleep_os(100);
++
++			write_rfreg(pAdapter, rfPath, 0x00, 0x30000); // PAD all on.
++			rtw_usleep_os(100);
++		}
++	}
++	
++}
++
++
++void Hal_SetCarrierSuppressionTx(PADAPTER pAdapter, u8 bStart)
++{
++	pAdapter->mppriv.MptCtx.bCarrierSuppression = bStart;
++	if (bStart) // Start Carrier Suppression.
++	{
++		RT_TRACE(_module_mp_,_drv_alert_, ("SetCarrierSuppressionTx: test start\n"));
++		//if(pMgntInfo->dot11CurrentWirelessMode == WIRELESS_MODE_B)
++		if (pAdapter->mppriv.rateidx <= MPT_RATE_11M)
++		  {
++			// 1. if CCK block on?
++			if(!read_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn))
++				write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, bEnable);//set CCK block on
++
++			//Turn Off All Test Mode
++			write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable);
++			write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable);
++			write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable);
++
++			write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x2);    //transmit mode
++			write_bbreg(pAdapter, rCCK0_System, bCCKScramble, 0x0);  //turn off scramble setting
++
++			//Set CCK Tx Test Rate
++			//PHY_SetBBReg(pAdapter, rCCK0_System, bCCKTxRate, pMgntInfo->ForcedDataRate);
++			write_bbreg(pAdapter, rCCK0_System, bCCKTxRate, 0x0);    //Set FTxRate to 1Mbps
++		}
++	}
++	else// Stop Carrier Suppression.
++	{
++		RT_TRACE(_module_mp_,_drv_alert_, ("SetCarrierSuppressionTx: test stop\n"));
++		//if(pMgntInfo->dot11CurrentWirelessMode == WIRELESS_MODE_B)
++		if (pAdapter->mppriv.rateidx <= MPT_RATE_11M ) {
++			write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x0);    //normal mode
++			write_bbreg(pAdapter, rCCK0_System, bCCKScramble, 0x1);  //turn on scramble setting
++
++			//BB Reset
++			write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0);
++			write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1);
++		}
++	}
++	//DbgPrint("\n MPT_ProSetCarrierSupp() is finished. \n");
++}
++
++void Hal_SetCCKContinuousTx(PADAPTER pAdapter, u8 bStart)
++{
++	u32 cckrate;
++
++	if (bStart)
++	{
++		RT_TRACE(_module_mp_, _drv_alert_,
++			 ("SetCCKContinuousTx: test start\n"));
++
++		// 1. if CCK block on?
++		if(!read_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn))
++			write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, bEnable);//set CCK block on
++
++		//Turn Off All Test Mode
++		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable);
++		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable);
++		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable);
++		//Set CCK Tx Test Rate
++		#if 0
++		switch(pAdapter->mppriv.rateidx)
++		{
++			case 2:
++				cckrate = 0;
++				break;
++			case 4:
++				cckrate = 1;
++				break;
++			case 11:
++				cckrate = 2;
++				break;
++			case 22:
++				cckrate = 3;
++				break;
++			default:
++				cckrate = 0;
++				break;
++		}
++		#else
++		cckrate  = pAdapter->mppriv.rateidx;
++		#endif
++		write_bbreg(pAdapter, rCCK0_System, bCCKTxRate, cckrate);
++		write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x2);	//transmit mode
++		write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable);	//turn on scramble setting
++
++#ifdef CONFIG_RTL8192C
++		// Patch for CCK 11M waveform
++		if (cckrate == MPT_RATE_1M)
++			write_bbreg(pAdapter, 0xA71, BIT(6), bDisable);
++		else
++			write_bbreg(pAdapter, 0xA71, BIT(6), bEnable);
++#endif
++
++	}
++	else {
++		RT_TRACE(_module_mp_, _drv_info_,
++			 ("SetCCKContinuousTx: test stop\n"));
++
++		write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x0);	//normal mode
++		write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable);	//turn on scramble setting
++
++		//BB Reset
++		write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0);
++		write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1);
++	}
++
++	pAdapter->mppriv.MptCtx.bCckContTx = bStart;
++	pAdapter->mppriv.MptCtx.bOfdmContTx = _FALSE;
++}/* mpt_StartCckContTx */
++
++void Hal_SetOFDMContinuousTx(PADAPTER pAdapter, u8 bStart)
++{
++    HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++
++	if (bStart) {
++		RT_TRACE(_module_mp_, _drv_info_, ("SetOFDMContinuousTx: test start\n"));
++		// 1. if OFDM block on?
++		if(!read_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn))
++			write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, bEnable);//set OFDM block on
++        {
++
++		// 2. set CCK test mode off, set to CCK normal mode
++		write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, bDisable);
++
++		// 3. turn on scramble setting
++		write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable);
++        }
++		// 4. Turn On Continue Tx and turn off the other test modes.
++		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bEnable);
++		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable);
++		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable);
++	} else {
++		RT_TRACE(_module_mp_,_drv_info_, ("SetOFDMContinuousTx: test stop\n"));
++		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable);
++		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable);
++		write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable);
++		//Delay 10 ms
++		rtw_msleep_os(10);
++		//BB Reset
++		write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0);
++		write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1);
++	}
++
++	pAdapter->mppriv.MptCtx.bCckContTx = _FALSE;
++	pAdapter->mppriv.MptCtx.bOfdmContTx = bStart;
++}/* mpt_StartOfdmContTx */
++
++void Hal_SetContinuousTx(PADAPTER pAdapter, u8 bStart)
++{
++#if 0
++	// ADC turn off [bit24-21] adc port0 ~ port1
++	if (bStart) {
++		write_bbreg(pAdapter, rRx_Wait_CCCA, read_bbreg(pAdapter, rRx_Wait_CCCA) & 0xFE1FFFFF);
++		rtw_usleep_os(100);
++	}
++#endif
++	RT_TRACE(_module_mp_, _drv_info_,
++		 ("SetContinuousTx: rate:%d\n", pAdapter->mppriv.rateidx));
++
++	pAdapter->mppriv.MptCtx.bStartContTx = bStart;
++	if (pAdapter->mppriv.rateidx <= MPT_RATE_11M)
++	{
++		Hal_SetCCKContinuousTx(pAdapter, bStart);
++	}
++	else if ((pAdapter->mppriv.rateidx >= MPT_RATE_6M) &&
++		 (pAdapter->mppriv.rateidx <= MPT_RATE_MCS15))
++	{
++		Hal_SetOFDMContinuousTx(pAdapter, bStart);
++	}
++#if 0
++	// ADC turn on [bit24-21] adc port0 ~ port1
++	if (!bStart) {
++		write_bbreg(pAdapter, rRx_Wait_CCCA, read_bbreg(pAdapter, rRx_Wait_CCCA) | 0x01E00000);
++	}
++#endif
++}
++
++#endif // CONFIG_MP_INCLUDE
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_phycfg.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_phycfg.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_phycfg.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_phycfg.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,4841 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++/******************************************************************************
++
++ Module:	rtl8192c_phycfg.c	
++
++ Note:		Merge 92SE/SU PHY config as below
++			1. BB register R/W API
++ 			2. RF register R/W API
++ 			3. Initial BB/RF/MAC config by reading BB/MAC/RF txt.
++ 			3. Power setting API
++ 			4. Channel switch API
++ 			5. Initial gain switch API.
++ 			6. Other BB/MAC/RF API.
++ 			
++ Function:	PHY: Extern function, phy: local function
++ 		 
++ Export:	PHY_FunctionName
++
++ Abbrev:	NONE
++
++ History:
++	Data		Who		Remark	
++	08/08/2008  MHC    	1. Port from 9x series phycfg.c
++						2. Reorganize code arch and ad description.
++						3. Collect similar function.
++						4. Seperate extern/local API.
++	08/12/2008	MHC		We must merge or move USB PHY relative function later.
++	10/07/2008	MHC		Add IQ calibration for PHY.(Only 1T2R mode now!!!)
++	11/06/2008	MHC		Add TX Power index PG file to config in 0xExx register
++						area to map with EEPROM/EFUSE tx pwr index.
++	
++******************************************************************************/
++#define _HAL_8192C_PHYCFG_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <rtw_byteorder.h>
++
++#ifdef CONFIG_IOL
++#include <rtw_iol.h>
++#endif
++
++#include <rtl8192c_hal.h>
++
++
++/*---------------------------Define Local Constant---------------------------*/
++/* Channel switch:The size of command tables for switch channel*/
++#define MAX_PRECMD_CNT 16
++#define MAX_RFDEPENDCMD_CNT 16
++#define MAX_POSTCMD_CNT 16
++
++#define MAX_DOZE_WAITING_TIMES_9x 64
++
++/*---------------------------Define Local Constant---------------------------*/
++
++
++/*------------------------Define global variable-----------------------------*/
++
++/*------------------------Define local variable------------------------------*/
++
++
++/*--------------------Define export function prototype-----------------------*/
++// Please refer to header file
++/*--------------------Define export function prototype-----------------------*/
++
++/*----------------------------Function Body----------------------------------*/
++//
++// 1. BB register R/W API
++//
++
++/**
++* Function:	phy_CalculateBitShift
++*
++* OverView:	Get shifted position of the BitMask
++*
++* Input:
++*			u4Byte		BitMask,	
++*
++* Output:	none
++* Return:		u4Byte		Return the shift bit bit position of the mask
++*/
++static	u32
++phy_CalculateBitShift(
++	u32 BitMask
++	)
++{
++	u32 i;
++
++	for(i=0; i<=31; i++)
++	{
++		if ( ((BitMask>>i) &  0x1 ) == 1)
++			break;
++	}
++
++	return (i);
++}
++
++
++/**
++* Function:	PHY_QueryBBReg
++*
++* OverView:	Read "sepcific bits" from BB register
++*
++* Input:
++*			PADAPTER		Adapter,
++*			u4Byte			RegAddr,		//The target address to be readback
++*			u4Byte			BitMask		//The target bit position in the target address
++*										//to be readback	
++* Output:	None
++* Return:		u4Byte			Data			//The readback register value
++* Note:		This function is equal to "GetRegSetting" in PHY programming guide
++*/
++u32
++rtl8192c_PHY_QueryBBReg(
++	IN	PADAPTER	Adapter,
++	IN	u32		RegAddr,
++	IN	u32		BitMask
++	)
++{	
++  	u32	ReturnValue = 0, OriginalValue, BitShift;
++	u16	BBWaitCounter = 0;
++
++#if (DISABLE_BB_RF == 1)
++	return 0;
++#endif
++
++	//RT_TRACE(COMP_RF, DBG_TRACE, ("--->PHY_QueryBBReg(): RegAddr(%#lx), BitMask(%#lx)\n", RegAddr, BitMask));
++
++	OriginalValue = rtw_read32(Adapter, RegAddr);
++	BitShift = phy_CalculateBitShift(BitMask);
++	ReturnValue = (OriginalValue & BitMask) >> BitShift;
++
++	//RTPRINT(FPHY, PHY_BBR, ("BBR MASK=0x%lx Addr[0x%lx]=0x%lx\n", BitMask, RegAddr, OriginalValue));
++	//RT_TRACE(COMP_RF, DBG_TRACE, ("<---PHY_QueryBBReg(): RegAddr(%#lx), BitMask(%#lx), OriginalValue(%#lx)\n", RegAddr, BitMask, OriginalValue));
++
++	return (ReturnValue);
++
++}
++
++
++/**
++* Function:	PHY_SetBBReg
++*
++* OverView:	Write "Specific bits" to BB register (page 8~) 
++*
++* Input:
++*			PADAPTER		Adapter,
++*			u4Byte			RegAddr,		//The target address to be modified
++*			u4Byte			BitMask		//The target bit position in the target address
++*										//to be modified	
++*			u4Byte			Data			//The new register value in the target bit position
++*										//of the target address			
++*
++* Output:	None
++* Return:		None
++* Note:		This function is equal to "PutRegSetting" in PHY programming guide
++*/
++
++VOID
++rtl8192c_PHY_SetBBReg(
++	IN	PADAPTER	Adapter,
++	IN	u32		RegAddr,
++	IN	u32		BitMask,
++	IN	u32		Data
++	)
++{
++	HAL_DATA_TYPE	*pHalData		= GET_HAL_DATA(Adapter);
++	//u16			BBWaitCounter	= 0;
++	u32			OriginalValue, BitShift;
++
++#if (DISABLE_BB_RF == 1)
++	return;
++#endif
++
++	//RT_TRACE(COMP_RF, DBG_TRACE, ("--->PHY_SetBBReg(): RegAddr(%#lx), BitMask(%#lx), Data(%#lx)\n", RegAddr, BitMask, Data));
++
++	if(BitMask!= bMaskDWord){//if not "double word" write
++		OriginalValue = rtw_read32(Adapter, RegAddr);
++		BitShift = phy_CalculateBitShift(BitMask);
++		Data = ((OriginalValue & (~BitMask)) | ((Data << BitShift) & BitMask));
++	}
++
++	rtw_write32(Adapter, RegAddr, Data);
++
++	//RTPRINT(FPHY, PHY_BBW, ("BBW MASK=0x%lx Addr[0x%lx]=0x%lx\n", BitMask, RegAddr, Data));
++	//RT_TRACE(COMP_RF, DBG_TRACE, ("<---PHY_SetBBReg(): RegAddr(%#lx), BitMask(%#lx), Data(%#lx)\n", RegAddr, BitMask, Data));
++	
++}
++
++
++//
++// 2. RF register R/W API
++//
++
++/*-----------------------------------------------------------------------------
++ * Function:	phy_FwRFSerialRead()
++ *
++ * Overview:	We support firmware to execute RF-R/W.
++ *
++ * Input:		NONE
++ *
++ * Output:		NONE
++ *
++ * Return:		NONE
++ *
++ * Revised History:
++ *	When		Who		Remark
++ *	01/21/2008	MHC		Create Version 0.  
++ *
++ *---------------------------------------------------------------------------*/
++static	u32
++phy_FwRFSerialRead(
++	IN	PADAPTER			Adapter,
++	IN	RF_RADIO_PATH_E	eRFPath,
++	IN	u32				Offset	)
++{
++	u32		retValue = 0;		
++	//RT_ASSERT(FALSE,("deprecate!\n"));
++	return	(retValue);
++
++}	/* phy_FwRFSerialRead */
++
++
++/*-----------------------------------------------------------------------------
++ * Function:	phy_FwRFSerialWrite()
++ *
++ * Overview:	We support firmware to execute RF-R/W.
++ *
++ * Input:		NONE
++ *
++ * Output:		NONE
++ *
++ * Return:		NONE
++ *
++ * Revised History:
++ *	When		Who		Remark
++ *	01/21/2008	MHC		Create Version 0.  
++ *
++ *---------------------------------------------------------------------------*/
++static	VOID
++phy_FwRFSerialWrite(
++	IN	PADAPTER			Adapter,
++	IN	RF_RADIO_PATH_E	eRFPath,
++	IN	u32				Offset,
++	IN	u32				Data	)
++{
++	//RT_ASSERT(FALSE,("deprecate!\n"));
++}
++
++
++/**
++* Function:	phy_RFSerialRead
++*
++* OverView:	Read regster from RF chips 
++*
++* Input:
++*			PADAPTER		Adapter,
++*			RF_RADIO_PATH_E	eRFPath,	//Radio path of A/B/C/D
++*			u4Byte			Offset,		//The target address to be read			
++*
++* Output:	None
++* Return:		u4Byte			reback value
++* Note:		Threre are three types of serial operations: 
++*			1. Software serial write
++*			2. Hardware LSSI-Low Speed Serial Interface 
++*			3. Hardware HSSI-High speed
++*			serial write. Driver need to implement (1) and (2).
++*			This function is equal to the combination of RF_ReadReg() and  RFLSSIRead()
++*/
++static	u32
++phy_RFSerialRead(
++	IN	PADAPTER			Adapter,
++	IN	RF_RADIO_PATH_E	eRFPath,
++	IN	u32				Offset
++	)
++{
++	u32						retValue = 0;
++	HAL_DATA_TYPE				*pHalData = GET_HAL_DATA(Adapter);
++	BB_REGISTER_DEFINITION_T	*pPhyReg = &pHalData->PHYRegDef[eRFPath];
++	u32						NewOffset;
++	u32 						tmplong,tmplong2;
++	u8					RfPiEnable=0;
++#if 0
++	if(pHalData->RFChipID == RF_8225 && Offset > 0x24) //36 valid regs
++		return	retValue;
++	if(pHalData->RFChipID == RF_8256 && Offset > 0x2D) //45 valid regs
++		return	retValue;
++#endif
++	//
++	// Make sure RF register offset is correct 
++	//
++	Offset &= 0x3f;
++
++	//
++	// Switch page for 8256 RF IC
++	//
++	NewOffset = Offset;
++
++	// 2009/06/17 MH We can not execute IO for power save or other accident mode.
++	//if(RT_CANNOT_IO(Adapter))
++	//{
++	//	RTPRINT(FPHY, PHY_RFR, ("phy_RFSerialRead return all one\n"));
++	//	return	0xFFFFFFFF;
++	//}
++
++	// For 92S LSSI Read RFLSSIRead
++	// For RF A/B write 0x824/82c(does not work in the future) 
++	// We must use 0x824 for RF A and B to execute read trigger
++	tmplong = PHY_QueryBBReg(Adapter, rFPGA0_XA_HSSIParameter2, bMaskDWord);
++	if(eRFPath == RF_PATH_A)
++		tmplong2 = tmplong;
++	else
++		tmplong2 = PHY_QueryBBReg(Adapter, pPhyReg->rfHSSIPara2, bMaskDWord);
++
++	tmplong2 = (tmplong2 & (~bLSSIReadAddress)) | (NewOffset<<23) | bLSSIReadEdge;	//T65 RF
++	
++	PHY_SetBBReg(Adapter, rFPGA0_XA_HSSIParameter2, bMaskDWord, tmplong&(~bLSSIReadEdge));	
++	rtw_udelay_os(10);// PlatformStallExecution(10);
++	
++	PHY_SetBBReg(Adapter, pPhyReg->rfHSSIPara2, bMaskDWord, tmplong2);	
++	rtw_udelay_os(100);//PlatformStallExecution(100);
++	
++	PHY_SetBBReg(Adapter, rFPGA0_XA_HSSIParameter2, bMaskDWord, tmplong|bLSSIReadEdge);	
++	rtw_udelay_os(10);//PlatformStallExecution(10);
++
++	if(eRFPath == RF_PATH_A)
++		RfPiEnable = (u8)PHY_QueryBBReg(Adapter, rFPGA0_XA_HSSIParameter1, BIT8);
++	else if(eRFPath == RF_PATH_B)
++		RfPiEnable = (u8)PHY_QueryBBReg(Adapter, rFPGA0_XB_HSSIParameter1, BIT8);
++	
++	if(RfPiEnable)
++	{	// Read from BBreg8b8, 12 bits for 8190, 20bits for T65 RF
++		retValue = PHY_QueryBBReg(Adapter, pPhyReg->rfLSSIReadBackPi, bLSSIReadBackData);
++		//DBG_8192C("Readback from RF-PI : 0x%x\n", retValue);
++	}
++	else
++	{	//Read from BBreg8a0, 12 bits for 8190, 20 bits for T65 RF
++		retValue = PHY_QueryBBReg(Adapter, pPhyReg->rfLSSIReadBack, bLSSIReadBackData);
++		//DBG_8192C("Readback from RF-SI : 0x%x\n", retValue);
++	}
++	//DBG_8192C("RFR-%d Addr[0x%x]=0x%x\n", eRFPath, pPhyReg->rfLSSIReadBack, retValue);
++	
++	return retValue;	
++		
++}
++
++
++
++/**
++* Function:	phy_RFSerialWrite
++*
++* OverView:	Write data to RF register (page 8~) 
++*
++* Input:
++*			PADAPTER		Adapter,
++*			RF_RADIO_PATH_E	eRFPath,	//Radio path of A/B/C/D
++*			u4Byte			Offset,		//The target address to be read			
++*			u4Byte			Data			//The new register Data in the target bit position
++*										//of the target to be read			
++*
++* Output:	None
++* Return:		None
++* Note:		Threre are three types of serial operations: 
++*			1. Software serial write
++*			2. Hardware LSSI-Low Speed Serial Interface 
++*			3. Hardware HSSI-High speed
++*			serial write. Driver need to implement (1) and (2).
++*			This function is equal to the combination of RF_ReadReg() and  RFLSSIRead()
++ *
++ * Note: 		  For RF8256 only
++ *			 The total count of RTL8256(Zebra4) register is around 36 bit it only employs 
++ *			 4-bit RF address. RTL8256 uses "register mode control bit" (Reg00[12], Reg00[10]) 
++ *			 to access register address bigger than 0xf. See "Appendix-4 in PHY Configuration
++ *			 programming guide" for more details. 
++ *			 Thus, we define a sub-finction for RTL8526 register address conversion
++ *		       ===========================================================
++ *			 Register Mode		RegCTL[1]		RegCTL[0]		Note
++ *								(Reg00[12])		(Reg00[10])
++ *		       ===========================================================
++ *			 Reg_Mode0				0				x			Reg 0 ~15(0x0 ~ 0xf)
++ *		       ------------------------------------------------------------------
++ *			 Reg_Mode1				1				0			Reg 16 ~30(0x1 ~ 0xf)
++ *		       ------------------------------------------------------------------
++ *			 Reg_Mode2				1				1			Reg 31 ~ 45(0x1 ~ 0xf)
++ *		       ------------------------------------------------------------------
++ *
++ *	2008/09/02	MH	Add 92S RF definition
++ *	
++ *
++ *
++*/
++static	VOID
++phy_RFSerialWrite(
++	IN	PADAPTER			Adapter,
++	IN	RF_RADIO_PATH_E	eRFPath,
++	IN	u32				Offset,
++	IN	u32				Data
++	)
++{
++	u32						DataAndAddr = 0;
++	HAL_DATA_TYPE				*pHalData = GET_HAL_DATA(Adapter);
++	BB_REGISTER_DEFINITION_T	*pPhyReg = &pHalData->PHYRegDef[eRFPath];
++	u32						NewOffset;
++	
++#if 0
++	//<Roger_TODO> We should check valid regs for RF_6052 case.
++	if(pHalData->RFChipID == RF_8225 && Offset > 0x24) //36 valid regs
++		return;
++	if(pHalData->RFChipID == RF_8256 && Offset > 0x2D) //45 valid regs
++		return;
++#endif
++
++	// 2009/06/17 MH We can not execute IO for power save or other accident mode.
++	//if(RT_CANNOT_IO(Adapter))
++	//{
++	//	RTPRINT(FPHY, PHY_RFW, ("phy_RFSerialWrite stop\n"));
++	//	return;
++	//}
++
++	Offset &= 0x3f;
++
++	//
++	// Shadow Update
++	//
++	//PHY_RFShadowWrite(Adapter, eRFPath, Offset, Data);
++
++	//
++	// Switch page for 8256 RF IC
++	//
++	NewOffset = Offset;
++
++	//
++	// Put write addr in [5:0]  and write data in [31:16]
++	//
++	//DataAndAddr = (Data<<16) | (NewOffset&0x3f);
++	DataAndAddr = ((NewOffset<<20) | (Data&0x000fffff)) & 0x0fffffff;	// T65 RF
++
++	//
++	// Write Operation
++	//
++	PHY_SetBBReg(Adapter, pPhyReg->rf3wireOffset, bMaskDWord, DataAndAddr);
++	//RTPRINT(FPHY, PHY_RFW, ("RFW-%d Addr[0x%lx]=0x%lx\n", eRFPath, pPhyReg->rf3wireOffset, DataAndAddr));
++
++}
++
++
++/**
++* Function:	PHY_QueryRFReg
++*
++* OverView:	Query "Specific bits" to RF register (page 8~) 
++*
++* Input:
++*			PADAPTER		Adapter,
++*			RF_RADIO_PATH_E	eRFPath,	//Radio path of A/B/C/D
++*			u4Byte			RegAddr,		//The target address to be read
++*			u4Byte			BitMask		//The target bit position in the target address
++*										//to be read	
++*
++* Output:	None
++* Return:		u4Byte			Readback value
++* Note:		This function is equal to "GetRFRegSetting" in PHY programming guide
++*/
++u32
++rtl8192c_PHY_QueryRFReg(
++	IN	PADAPTER			Adapter,
++	IN	RF_RADIO_PATH_E	eRFPath,
++	IN	u32				RegAddr,
++	IN	u32				BitMask
++	)
++{
++	u32 Original_Value, Readback_Value, BitShift;	
++	//HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(Adapter);
++	//u8	RFWaitCounter = 0;
++	//_irqL	irqL;
++
++#if (DISABLE_BB_RF == 1)
++	return 0;
++#endif
++	
++	//RT_TRACE(COMP_RF, DBG_TRACE, ("--->PHY_QueryRFReg(): RegAddr(%#lx), eRFPath(%#x), BitMask(%#lx)\n", RegAddr, eRFPath,BitMask));
++	
++#ifdef CONFIG_USB_HCI
++	//PlatformAcquireMutex(&pHalData->mxRFOperate);
++#else
++	//_enter_critical(&pHalData->rf_lock, &irqL);
++#endif
++
++	
++	Original_Value = phy_RFSerialRead(Adapter, eRFPath, RegAddr);
++	
++	BitShift =  phy_CalculateBitShift(BitMask);
++	Readback_Value = (Original_Value & BitMask) >> BitShift;	
++
++#ifdef CONFIG_USB_HCI
++	//PlatformReleaseMutex(&pHalData->mxRFOperate);
++#else
++	//_exit_critical(&pHalData->rf_lock, &irqL);
++#endif
++
++
++	//RTPRINT(FPHY, PHY_RFR, ("RFR-%d MASK=0x%lx Addr[0x%lx]=0x%lx\n", eRFPath, BitMask, RegAddr, Original_Value));//BitMask(%#lx),BitMask,
++	//RT_TRACE(COMP_RF, DBG_TRACE, ("<---PHY_QueryRFReg(): RegAddr(%#lx), eRFPath(%#x),  Original_Value(%#lx)\n", 
++	//				RegAddr, eRFPath, Original_Value));
++	
++	return (Readback_Value);
++}
++
++/**
++* Function:	PHY_SetRFReg
++*
++* OverView:	Write "Specific bits" to RF register (page 8~) 
++*
++* Input:
++*			PADAPTER		Adapter,
++*			RF_RADIO_PATH_E	eRFPath,	//Radio path of A/B/C/D
++*			u4Byte			RegAddr,		//The target address to be modified
++*			u4Byte			BitMask		//The target bit position in the target address
++*										//to be modified	
++*			u4Byte			Data			//The new register Data in the target bit position
++*										//of the target address			
++*
++* Output:	None
++* Return:		None
++* Note:		This function is equal to "PutRFRegSetting" in PHY programming guide
++*/
++VOID
++rtl8192c_PHY_SetRFReg(
++	IN	PADAPTER			Adapter,
++	IN	RF_RADIO_PATH_E	eRFPath,
++	IN	u32				RegAddr,
++	IN	u32				BitMask,
++	IN	u32				Data
++	)
++{
++
++	//HAL_DATA_TYPE	*pHalData		= GET_HAL_DATA(Adapter);
++	//u1Byte			RFWaitCounter	= 0;
++	u32		Original_Value, BitShift;
++	//_irqL	irqL;
++
++#if (DISABLE_BB_RF == 1)
++	return;
++#endif
++	
++	//RT_TRACE(COMP_RF, DBG_TRACE, ("--->PHY_SetRFReg(): RegAddr(%#lx), BitMask(%#lx), Data(%#lx), eRFPath(%#x)\n", 
++	//	RegAddr, BitMask, Data, eRFPath));
++	//RTPRINT(FINIT, INIT_RF, ("PHY_SetRFReg(): RegAddr(%#lx), BitMask(%#lx), Data(%#lx), eRFPath(%#x)\n", 
++	//	RegAddr, BitMask, Data, eRFPath));
++
++
++#ifdef CONFIG_USB_HCI
++	//PlatformAcquireMutex(&pHalData->mxRFOperate);
++#else
++	//_enter_critical(&pHalData->rf_lock, &irqL);
++#endif
++
++	
++	// RF data is 12 bits only
++	if (BitMask != bRFRegOffsetMask) 
++	{
++		Original_Value = phy_RFSerialRead(Adapter, eRFPath, RegAddr);
++		BitShift =  phy_CalculateBitShift(BitMask);
++		Data = ((Original_Value & (~BitMask)) | (Data<< BitShift));
++	}
++		
++	phy_RFSerialWrite(Adapter, eRFPath, RegAddr, Data);
++	
++
++
++#ifdef CONFIG_USB_HCI
++	//PlatformReleaseMutex(&pHalData->mxRFOperate);
++#else
++	//_exit_critical(&pHalData->rf_lock, &irqL);
++#endif
++	
++	//PHY_QueryRFReg(Adapter,eRFPath,RegAddr,BitMask);
++	//RT_TRACE(COMP_RF, DBG_TRACE, ("<---PHY_SetRFReg(): RegAddr(%#lx), BitMask(%#lx), Data(%#lx), eRFPath(%#x)\n", 
++	//		RegAddr, BitMask, Data, eRFPath));
++
++}
++
++
++//
++// 3. Initial MAC/BB/RF config by reading MAC/BB/RF txt.
++//
++
++/*-----------------------------------------------------------------------------
++ * Function:    phy_ConfigMACWithParaFile()
++ *
++ * Overview:    This function read BB parameters from general file format, and do register
++ *			  Read/Write 
++ *
++ * Input:      	PADAPTER		Adapter
++ *			ps1Byte 			pFileName			
++ *
++ * Output:      NONE
++ *
++ * Return:      RT_STATUS_SUCCESS: configuration file exist
++ *			
++ * Note: 		The format of MACPHY_REG.txt is different from PHY and RF. 
++ *			[Register][Mask][Value]
++ *---------------------------------------------------------------------------*/
++static	int
++phy_ConfigMACWithParaFile(
++	IN	PADAPTER		Adapter,
++	IN	u8* 			pFileName
++)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	
++	int		rtStatus = _SUCCESS;
++
++	return rtStatus;
++}
++
++/*-----------------------------------------------------------------------------
++ * Function:    phy_ConfigMACWithHeaderFile()
++ *
++ * Overview:    This function read BB parameters from Header file we gen, and do register
++ *			  Read/Write 
++ *
++ * Input:      	PADAPTER		Adapter
++ *			ps1Byte 			pFileName			
++ *
++ * Output:      NONE
++ *
++ * Return:      RT_STATUS_SUCCESS: configuration file exist
++ *			
++ * Note: 		The format of MACPHY_REG.txt is different from PHY and RF. 
++ *			[Register][Mask][Value]
++ *---------------------------------------------------------------------------*/
++static	int
++phy_ConfigMACWithHeaderFile(
++	IN	PADAPTER		Adapter
++)
++{
++	u32					i = 0;
++	u32					ArrayLength = 0;
++	u32*				ptrArray;	
++	//HAL_DATA_TYPE			*pHalData = GET_HAL_DATA(Adapter);
++
++	//2008.11.06 Modified by tynli.
++	//RT_TRACE(COMP_INIT, DBG_LOUD, ("Read Rtl819XMACPHY_Array\n"));
++	ArrayLength = MAC_2T_ArrayLength;
++	ptrArray = Rtl819XMAC_Array;
++
++#ifdef CONFIG_IOL_MAC
++	if(rtw_IOL_applied(Adapter))
++	{
++		struct xmit_frame	*xmit_frame;
++		if((xmit_frame=rtw_IOL_accquire_xmit_frame(Adapter)) == NULL)
++			return _FAIL;
++
++		for(i = 0 ;i < ArrayLength;i=i+2){ // Add by tynli for 2 column
++			rtw_IOL_append_WB_cmd(xmit_frame, ptrArray[i], (u8)ptrArray[i+1]);
++		}
++
++		return rtw_IOL_exec_cmds_sync(Adapter, xmit_frame, 1000);
++	}
++	else
++#endif
++	{
++		for(i = 0 ;i < ArrayLength;i=i+2){ // Add by tynli for 2 column
++			rtw_write8(Adapter, ptrArray[i], (u8)ptrArray[i+1]);
++		}
++	}
++	
++	return _SUCCESS;
++	
++}
++
++
++/*-----------------------------------------------------------------------------
++ * Function:    PHY_MACConfig8192C
++ *
++ * Overview:	Condig MAC by header file or parameter file.
++ *
++ * Input:       NONE
++ *
++ * Output:      NONE
++ *
++ * Return:      NONE
++ *
++ * Revised History:
++ *  When		Who		Remark
++ *  08/12/2008	MHC		Create Version 0.
++ *
++ *---------------------------------------------------------------------------*/
++int
++PHY_MACConfig8192C(
++	IN	PADAPTER	Adapter
++	)
++{
++	int		rtStatus = _SUCCESS;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	s8			*pszMACRegFile;
++	s8			sz88CMACRegFile[] = RTL8188C_PHY_MACREG;
++	s8			sz92CMACRegFile[] = RTL8192C_PHY_MACREG;
++	BOOLEAN		is92C = IS_92C_SERIAL(pHalData->VersionID);
++
++	if(is92C)
++		pszMACRegFile = sz92CMACRegFile;
++	else
++		pszMACRegFile = sz88CMACRegFile;
++
++	//
++	// Config MAC
++	//
++#ifdef CONFIG_EMBEDDED_FWIMG
++	rtStatus = phy_ConfigMACWithHeaderFile(Adapter);
++#else
++	
++	// Not make sure EEPROM, add later
++	//RT_TRACE(COMP_INIT, DBG_LOUD, ("Read MACREG.txt\n"));
++	rtStatus = phy_ConfigMACWithParaFile(Adapter, pszMACRegFile);
++#endif
++
++#ifdef CONFIG_PCI_HCI
++	//this switching setting cause some 8192cu hw have redownload fw fail issue
++	//improve 2-stream TX EVM by Jenyu
++	if(is92C)
++		rtw_write8(Adapter, REG_SPS0_CTRL+3,0x71);
++#endif
++
++
++	// 2010.07.13 AMPDU aggregation number 9
++	//rtw_write16(Adapter, REG_MAX_AGGR_NUM, MAX_AGGR_NUM);
++	rtw_write8(Adapter, REG_MAX_AGGR_NUM, 0x0A); //By tynli. 2010.11.18.
++#ifdef CONFIG_USB_HCI
++	if(is92C && (BOARD_USB_DONGLE == pHalData->BoardType))
++		rtw_write8(Adapter, 0x40,0x04);	
++#endif		
++
++	return rtStatus;
++
++}
++
++
++/**
++* Function:	phy_InitBBRFRegisterDefinition
++*
++* OverView:	Initialize Register definition offset for Radio Path A/B/C/D
++*
++* Input:
++*			PADAPTER		Adapter,
++*
++* Output:	None
++* Return:		None
++* Note:		The initialization value is constant and it should never be changes
++*/
++static	VOID
++phy_InitBBRFRegisterDefinition(
++	IN	PADAPTER		Adapter
++)
++{
++	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(Adapter);	
++
++	// RF Interface Sowrtware Control
++	pHalData->PHYRegDef[RF_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 LSBs if read 32-bit from 0x870
++	pHalData->PHYRegDef[RF_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 MSBs if read 32-bit from 0x870 (16-bit for 0x872)
++	pHalData->PHYRegDef[RF_PATH_C].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 LSBs if read 32-bit from 0x874
++	pHalData->PHYRegDef[RF_PATH_D].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 MSBs if read 32-bit from 0x874 (16-bit for 0x876)
++
++	// RF Interface Readback Value
++	pHalData->PHYRegDef[RF_PATH_A].rfintfi = rFPGA0_XAB_RFInterfaceRB; // 16 LSBs if read 32-bit from 0x8E0	
++	pHalData->PHYRegDef[RF_PATH_B].rfintfi = rFPGA0_XAB_RFInterfaceRB;// 16 MSBs if read 32-bit from 0x8E0 (16-bit for 0x8E2)
++	pHalData->PHYRegDef[RF_PATH_C].rfintfi = rFPGA0_XCD_RFInterfaceRB;// 16 LSBs if read 32-bit from 0x8E4
++	pHalData->PHYRegDef[RF_PATH_D].rfintfi = rFPGA0_XCD_RFInterfaceRB;// 16 MSBs if read 32-bit from 0x8E4 (16-bit for 0x8E6)
++
++	// RF Interface Output (and Enable)
++	pHalData->PHYRegDef[RF_PATH_A].rfintfo = rFPGA0_XA_RFInterfaceOE; // 16 LSBs if read 32-bit from 0x860
++	pHalData->PHYRegDef[RF_PATH_B].rfintfo = rFPGA0_XB_RFInterfaceOE; // 16 LSBs if read 32-bit from 0x864
++
++	// RF Interface (Output and)  Enable
++	pHalData->PHYRegDef[RF_PATH_A].rfintfe = rFPGA0_XA_RFInterfaceOE; // 16 MSBs if read 32-bit from 0x860 (16-bit for 0x862)
++	pHalData->PHYRegDef[RF_PATH_B].rfintfe = rFPGA0_XB_RFInterfaceOE; // 16 MSBs if read 32-bit from 0x864 (16-bit for 0x866)
++
++	//Addr of LSSI. Wirte RF register by driver
++	pHalData->PHYRegDef[RF_PATH_A].rf3wireOffset = rFPGA0_XA_LSSIParameter; //LSSI Parameter
++	pHalData->PHYRegDef[RF_PATH_B].rf3wireOffset = rFPGA0_XB_LSSIParameter;
++
++	// RF parameter
++	pHalData->PHYRegDef[RF_PATH_A].rfLSSI_Select = rFPGA0_XAB_RFParameter;  //BB Band Select
++	pHalData->PHYRegDef[RF_PATH_B].rfLSSI_Select = rFPGA0_XAB_RFParameter;
++	pHalData->PHYRegDef[RF_PATH_C].rfLSSI_Select = rFPGA0_XCD_RFParameter;
++	pHalData->PHYRegDef[RF_PATH_D].rfLSSI_Select = rFPGA0_XCD_RFParameter;
++
++	// Tx AGC Gain Stage (same for all path. Should we remove this?)
++	pHalData->PHYRegDef[RF_PATH_A].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage
++	pHalData->PHYRegDef[RF_PATH_B].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage
++	pHalData->PHYRegDef[RF_PATH_C].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage
++	pHalData->PHYRegDef[RF_PATH_D].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage
++
++	// Tranceiver A~D HSSI Parameter-1
++	pHalData->PHYRegDef[RF_PATH_A].rfHSSIPara1 = rFPGA0_XA_HSSIParameter1;  //wire control parameter1
++	pHalData->PHYRegDef[RF_PATH_B].rfHSSIPara1 = rFPGA0_XB_HSSIParameter1;  //wire control parameter1
++
++	// Tranceiver A~D HSSI Parameter-2
++	pHalData->PHYRegDef[RF_PATH_A].rfHSSIPara2 = rFPGA0_XA_HSSIParameter2;  //wire control parameter2
++	pHalData->PHYRegDef[RF_PATH_B].rfHSSIPara2 = rFPGA0_XB_HSSIParameter2;  //wire control parameter2
++
++	// RF switch Control
++	pHalData->PHYRegDef[RF_PATH_A].rfSwitchControl = rFPGA0_XAB_SwitchControl; //TR/Ant switch control
++	pHalData->PHYRegDef[RF_PATH_B].rfSwitchControl = rFPGA0_XAB_SwitchControl;
++	pHalData->PHYRegDef[RF_PATH_C].rfSwitchControl = rFPGA0_XCD_SwitchControl;
++	pHalData->PHYRegDef[RF_PATH_D].rfSwitchControl = rFPGA0_XCD_SwitchControl;
++
++	// AGC control 1 
++	pHalData->PHYRegDef[RF_PATH_A].rfAGCControl1 = rOFDM0_XAAGCCore1;
++	pHalData->PHYRegDef[RF_PATH_B].rfAGCControl1 = rOFDM0_XBAGCCore1;
++	pHalData->PHYRegDef[RF_PATH_C].rfAGCControl1 = rOFDM0_XCAGCCore1;
++	pHalData->PHYRegDef[RF_PATH_D].rfAGCControl1 = rOFDM0_XDAGCCore1;
++
++	// AGC control 2 
++	pHalData->PHYRegDef[RF_PATH_A].rfAGCControl2 = rOFDM0_XAAGCCore2;
++	pHalData->PHYRegDef[RF_PATH_B].rfAGCControl2 = rOFDM0_XBAGCCore2;
++	pHalData->PHYRegDef[RF_PATH_C].rfAGCControl2 = rOFDM0_XCAGCCore2;
++	pHalData->PHYRegDef[RF_PATH_D].rfAGCControl2 = rOFDM0_XDAGCCore2;
++
++	// RX AFE control 1 
++	pHalData->PHYRegDef[RF_PATH_A].rfRxIQImbalance = rOFDM0_XARxIQImbalance;
++	pHalData->PHYRegDef[RF_PATH_B].rfRxIQImbalance = rOFDM0_XBRxIQImbalance;
++	pHalData->PHYRegDef[RF_PATH_C].rfRxIQImbalance = rOFDM0_XCRxIQImbalance;
++	pHalData->PHYRegDef[RF_PATH_D].rfRxIQImbalance = rOFDM0_XDRxIQImbalance;	
++
++	// RX AFE control 1  
++	pHalData->PHYRegDef[RF_PATH_A].rfRxAFE = rOFDM0_XARxAFE;
++	pHalData->PHYRegDef[RF_PATH_B].rfRxAFE = rOFDM0_XBRxAFE;
++	pHalData->PHYRegDef[RF_PATH_C].rfRxAFE = rOFDM0_XCRxAFE;
++	pHalData->PHYRegDef[RF_PATH_D].rfRxAFE = rOFDM0_XDRxAFE;	
++
++	// Tx AFE control 1 
++	pHalData->PHYRegDef[RF_PATH_A].rfTxIQImbalance = rOFDM0_XATxIQImbalance;
++	pHalData->PHYRegDef[RF_PATH_B].rfTxIQImbalance = rOFDM0_XBTxIQImbalance;
++	pHalData->PHYRegDef[RF_PATH_C].rfTxIQImbalance = rOFDM0_XCTxIQImbalance;
++	pHalData->PHYRegDef[RF_PATH_D].rfTxIQImbalance = rOFDM0_XDTxIQImbalance;	
++
++	// Tx AFE control 2 
++	pHalData->PHYRegDef[RF_PATH_A].rfTxAFE = rOFDM0_XATxAFE;
++	pHalData->PHYRegDef[RF_PATH_B].rfTxAFE = rOFDM0_XBTxAFE;
++	pHalData->PHYRegDef[RF_PATH_C].rfTxAFE = rOFDM0_XCTxAFE;
++	pHalData->PHYRegDef[RF_PATH_D].rfTxAFE = rOFDM0_XDTxAFE;	
++
++	// Tranceiver LSSI Readback SI mode 
++	pHalData->PHYRegDef[RF_PATH_A].rfLSSIReadBack = rFPGA0_XA_LSSIReadBack;
++	pHalData->PHYRegDef[RF_PATH_B].rfLSSIReadBack = rFPGA0_XB_LSSIReadBack;
++	pHalData->PHYRegDef[RF_PATH_C].rfLSSIReadBack = rFPGA0_XC_LSSIReadBack;
++	pHalData->PHYRegDef[RF_PATH_D].rfLSSIReadBack = rFPGA0_XD_LSSIReadBack;	
++
++	// Tranceiver LSSI Readback PI mode 
++	pHalData->PHYRegDef[RF_PATH_A].rfLSSIReadBackPi = TransceiverA_HSPI_Readback;
++	pHalData->PHYRegDef[RF_PATH_B].rfLSSIReadBackPi = TransceiverB_HSPI_Readback;
++	//pHalData->PHYRegDef[RF_PATH_C].rfLSSIReadBackPi = rFPGA0_XC_LSSIReadBack;
++	//pHalData->PHYRegDef[RF_PATH_D].rfLSSIReadBackPi = rFPGA0_XD_LSSIReadBack;	
++
++}
++
++
++/*-----------------------------------------------------------------------------
++ * Function:    phy_ConfigBBWithParaFile()
++ *
++ * Overview:    This function read BB parameters from general file format, and do register
++ *			  Read/Write 
++ *
++ * Input:      	PADAPTER		Adapter
++ *			ps1Byte 			pFileName			
++ *
++ * Output:      NONE
++ *
++ * Return:      RT_STATUS_SUCCESS: configuration file exist
++ *	2008/11/06	MH	For 92S we do not support silent reset now. Disable 
++ *					parameter file compare!!!!!!??
++ *			
++ *---------------------------------------------------------------------------*/
++static	int
++phy_ConfigBBWithParaFile(
++	IN	PADAPTER		Adapter,
++	IN	u8* 			pFileName
++)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	
++	int		rtStatus = _SUCCESS;
++
++	return rtStatus;	
++}
++
++
++
++//****************************************
++// The following is for High Power PA
++//****************************************
++VOID
++phy_ConfigBBExternalPA(
++	IN	PADAPTER			Adapter
++)
++{
++#ifdef CONFIG_USB_HCI
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	u16 i=0;
++	u32 temp=0;
++
++	if(!pHalData->ExternalPA)
++	{
++		return;
++	}
++
++	// 2010/10/19 MH According to Jenyu/EEChou 's opinion, we need not to execute the 
++	// same code as SU. It is already updated in PHY_REG_1T_HP.txt.
++#if 0
++	PHY_SetBBReg(Adapter, 0xee8, BIT28, 1);
++	temp = PHY_QueryBBReg(Adapter, 0x860, bMaskDWord);
++	temp |= (BIT26|BIT21|BIT10|BIT5);
++	PHY_SetBBReg(Adapter, 0x860, bMaskDWord, temp);
++	PHY_SetBBReg(Adapter, 0x870, BIT10, 0);
++	PHY_SetBBReg(Adapter, 0xc80, bMaskDWord, 0x20000080);
++	PHY_SetBBReg(Adapter, 0xc88, bMaskDWord, 0x40000100);
++#endif
++
++#endif
++}
++
++/*-----------------------------------------------------------------------------
++ * Function:    phy_ConfigBBWithHeaderFile()
++ *
++ * Overview:    This function read BB parameters from general file format, and do register
++ *			  Read/Write 
++ *
++ * Input:      	PADAPTER		Adapter
++ *			u1Byte 			ConfigType     0 => PHY_CONFIG
++ *										 1 =>AGC_TAB
++ *
++ * Output:      NONE
++ *
++ * Return:      RT_STATUS_SUCCESS: configuration file exist
++ *			
++ *---------------------------------------------------------------------------*/
++static	int
++phy_ConfigBBWithHeaderFile(
++	IN	PADAPTER		Adapter,
++	IN	u8 			ConfigType
++)
++{
++	int i;
++	u32*	Rtl819XPHY_REGArray_Table;
++	u32*	Rtl819XAGCTAB_Array_Table;
++	u16	PHY_REGArrayLen, AGCTAB_ArrayLen;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	int ret = _SUCCESS;
++
++	//
++	// 2009.11.24. Modified by tynli.
++	//
++	if(IS_92C_SERIAL(pHalData->VersionID))
++	{
++		AGCTAB_ArrayLen = AGCTAB_2TArrayLength;
++		Rtl819XAGCTAB_Array_Table = Rtl819XAGCTAB_2TArray;
++		PHY_REGArrayLen = PHY_REG_2TArrayLength;
++		Rtl819XPHY_REGArray_Table = Rtl819XPHY_REG_2TArray;
++#ifdef CONFIG_USB_HCI
++		if(pHalData->BoardType == BOARD_MINICARD )
++		{
++			PHY_REGArrayLen = PHY_REG_2T_mCardArrayLength;
++			Rtl819XPHY_REGArray_Table = Rtl819XPHY_REG_2T_mCardArray;			
++		}
++#endif
++	}
++	else
++	{
++		AGCTAB_ArrayLen = AGCTAB_1TArrayLength;
++		Rtl819XAGCTAB_Array_Table = Rtl819XAGCTAB_1TArray;
++		PHY_REGArrayLen = PHY_REG_1TArrayLength;
++		Rtl819XPHY_REGArray_Table = Rtl819XPHY_REG_1TArray;
++#ifdef CONFIG_USB_HCI
++		if(pHalData->BoardType == BOARD_MINICARD )
++		{
++			PHY_REGArrayLen = PHY_REG_1T_mCardArrayLength;
++			Rtl819XPHY_REGArray_Table = Rtl819XPHY_REG_1T_mCardArray;			
++		}
++		else if(pHalData->BoardType == BOARD_USB_High_PA)
++		{
++			AGCTAB_ArrayLen = AGCTAB_1T_HPArrayLength;
++			Rtl819XAGCTAB_Array_Table = Rtl819XAGCTAB_1T_HPArray;
++			PHY_REGArrayLen = PHY_REG_1T_HPArrayLength;
++			Rtl819XPHY_REGArray_Table = Rtl819XPHY_REG_1T_HPArray;			
++		}
++#endif
++	}
++
++	if(ConfigType == BaseBand_Config_PHY_REG)
++	{
++		#ifdef CONFIG_IOL_BB_PHY_REG
++		if(rtw_IOL_applied(Adapter))
++		{
++			struct xmit_frame	*xmit_frame;
++			u32 tmp_value;
++
++			if((xmit_frame=rtw_IOL_accquire_xmit_frame(Adapter)) == NULL) {
++				ret = _FAIL;
++				goto exit;
++			}
++
++			for(i=0;i<PHY_REGArrayLen;i=i+2)
++			{
++				tmp_value=Rtl819XPHY_REGArray_Table[i+1];
++				
++				if (Rtl819XPHY_REGArray_Table[i] == 0xfe)
++					rtw_IOL_append_DELAY_MS_cmd(xmit_frame, 50);
++				else if (Rtl819XPHY_REGArray_Table[i] == 0xfd)
++					rtw_IOL_append_DELAY_MS_cmd(xmit_frame, 5);
++				else if (Rtl819XPHY_REGArray_Table[i] == 0xfc)
++					rtw_IOL_append_DELAY_MS_cmd(xmit_frame, 1);
++				else if (Rtl819XPHY_REGArray_Table[i] == 0xfb)
++					rtw_IOL_append_DELAY_US_cmd(xmit_frame, 50);
++				else if (Rtl819XPHY_REGArray_Table[i] == 0xfa)
++					rtw_IOL_append_DELAY_US_cmd(xmit_frame, 5);
++				else if (Rtl819XPHY_REGArray_Table[i] == 0xf9)
++					rtw_IOL_append_DELAY_US_cmd(xmit_frame, 1);
++
++				rtw_IOL_append_WD_cmd(xmit_frame, Rtl819XPHY_REGArray_Table[i], tmp_value);	
++				//RT_TRACE(COMP_INIT, DBG_TRACE, ("The Rtl819XPHY_REGArray_Table[0] is %lx Rtl819XPHY_REGArray[1] is %lx \n",Rtl819XPHY_REGArray_Table[i], Rtl819XPHY_REGArray_Table[i+1]));
++			}
++		
++			ret = rtw_IOL_exec_cmds_sync(Adapter, xmit_frame, 1000);
++		}
++		else
++		#endif
++		{
++			for(i=0;i<PHY_REGArrayLen;i=i+2)
++			{
++				if (Rtl819XPHY_REGArray_Table[i] == 0xfe){
++					#ifdef CONFIG_LONG_DELAY_ISSUE
++					rtw_msleep_os(50);
++					#else
++					rtw_mdelay_os(50);
++					#endif
++				}
++				else if (Rtl819XPHY_REGArray_Table[i] == 0xfd)
++					rtw_mdelay_os(5);
++				else if (Rtl819XPHY_REGArray_Table[i] == 0xfc)
++					rtw_mdelay_os(1);
++				else if (Rtl819XPHY_REGArray_Table[i] == 0xfb)
++					rtw_udelay_os(50);
++				else if (Rtl819XPHY_REGArray_Table[i] == 0xfa)
++					rtw_udelay_os(5);
++				else if (Rtl819XPHY_REGArray_Table[i] == 0xf9)
++					rtw_udelay_os(1);
++
++				PHY_SetBBReg(Adapter, Rtl819XPHY_REGArray_Table[i], bMaskDWord, Rtl819XPHY_REGArray_Table[i+1]);
++
++				// Add 1us delay between BB/RF register setting.
++				rtw_udelay_os(1);
++
++				//RT_TRACE(COMP_INIT, DBG_TRACE, ("The Rtl819XPHY_REGArray_Table[0] is %lx Rtl819XPHY_REGArray[1] is %lx \n",Rtl819XPHY_REGArray_Table[i], Rtl819XPHY_REGArray_Table[i+1]));
++			}
++		}
++	
++		// for External PA
++		phy_ConfigBBExternalPA(Adapter);
++	}
++	else if(ConfigType == BaseBand_Config_AGC_TAB)
++	{
++		#ifdef CONFIG_IOL_BB_AGC_TAB
++		if(rtw_IOL_applied(Adapter))
++		{
++			struct xmit_frame	*xmit_frame;
++
++			if((xmit_frame=rtw_IOL_accquire_xmit_frame(Adapter)) == NULL) {
++				ret = _FAIL;
++				goto exit;
++			}
++
++			for(i=0;i<AGCTAB_ArrayLen;i=i+2)
++			{
++				rtw_IOL_append_WD_cmd(xmit_frame, Rtl819XAGCTAB_Array_Table[i], Rtl819XAGCTAB_Array_Table[i+1]);							
++				//RT_TRACE(COMP_INIT, DBG_TRACE, ("The Rtl819XAGCTAB_Array_Table[0] is %lx Rtl819XPHY_REGArray[1] is %lx \n",Rtl819XAGCTAB_Array_Table[i], Rtl819XAGCTAB_Array_Table[i+1]));
++			}
++		
++			ret = rtw_IOL_exec_cmds_sync(Adapter, xmit_frame, 1000);
++		}
++		else
++		#endif
++		{
++			for(i=0;i<AGCTAB_ArrayLen;i=i+2)
++			{
++				PHY_SetBBReg(Adapter, Rtl819XAGCTAB_Array_Table[i], bMaskDWord, Rtl819XAGCTAB_Array_Table[i+1]);		
++
++				// Add 1us delay between BB/RF register setting.
++				rtw_udelay_os(1);
++				
++				//RT_TRACE(COMP_INIT, DBG_TRACE, ("The Rtl819XAGCTAB_Array_Table[0] is %lx Rtl819XPHY_REGArray[1] is %lx \n",Rtl819XAGCTAB_Array_Table[i], Rtl819XAGCTAB_Array_Table[i+1]));
++			}
++		}
++	}
++
++exit:
++	return ret;
++	
++}
++
++
++VOID
++storePwrIndexDiffRateOffset(
++	IN	PADAPTER	Adapter,
++	IN	u32		RegAddr,
++	IN	u32		BitMask,
++	IN	u32		Data
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	
++	if(RegAddr == rTxAGC_A_Rate18_06)
++	{
++		pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][0] = Data;
++		//RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][0] = 0x%lx\n", pHalData->pwrGroupCnt,
++		//	pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][0]));
++	}
++	if(RegAddr == rTxAGC_A_Rate54_24)
++	{
++		pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][1] = Data;
++		//RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][1] = 0x%lx\n", pHalData->pwrGroupCnt,
++		//	pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][1]));
++	}
++	if(RegAddr == rTxAGC_A_CCK1_Mcs32)
++	{
++		pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][6] = Data;
++		//RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][6] = 0x%lx\n", pHalData->pwrGroupCnt,
++		//	pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][6]));
++	}
++	if(RegAddr == rTxAGC_B_CCK11_A_CCK2_11 && BitMask == 0xffffff00)
++	{
++		pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][7] = Data;
++		//RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][7] = 0x%lx\n", pHalData->pwrGroupCnt,
++		//	pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][7]));
++	}	
++	if(RegAddr == rTxAGC_A_Mcs03_Mcs00)
++	{
++		pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][2] = Data;
++		//RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][2] = 0x%lx\n", pHalData->pwrGroupCnt,
++		//	pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][2]));
++	}
++	if(RegAddr == rTxAGC_A_Mcs07_Mcs04)
++	{
++		pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][3] = Data;
++		//RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][3] = 0x%lx\n", pHalData->pwrGroupCnt,
++		//	pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][3]));
++	}
++	if(RegAddr == rTxAGC_A_Mcs11_Mcs08)
++	{
++		pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][4] = Data;
++		//RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][4] = 0x%lx\n", pHalData->pwrGroupCnt,
++		//	pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][4]));
++	}
++	if(RegAddr == rTxAGC_A_Mcs15_Mcs12)
++	{
++		pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][5] = Data;
++		//RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][5] = 0x%lx\n", pHalData->pwrGroupCnt,
++		//	pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][5]));
++	}
++	if(RegAddr == rTxAGC_B_Rate18_06)
++	{
++		pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][8] = Data;
++		//RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][8] = 0x%lx\n", pHalData->pwrGroupCnt,
++		//	pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][8]));
++	}
++	if(RegAddr == rTxAGC_B_Rate54_24)
++	{
++		pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][9] = Data;
++		//RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][9] = 0x%lx\n", pHalData->pwrGroupCnt,
++		//	pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][9]));
++	}
++	if(RegAddr == rTxAGC_B_CCK1_55_Mcs32)
++	{
++		pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][14] = Data;
++		//RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][14] = 0x%lx\n", pHalData->pwrGroupCnt,
++		//	pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][14]));
++	}
++	if(RegAddr == rTxAGC_B_CCK11_A_CCK2_11 && BitMask == 0x000000ff)
++	{
++		pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][15] = Data;
++		//RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][15] = 0x%lx\n", pHalData->pwrGroupCnt,
++		//	pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][15]));
++	}	
++	if(RegAddr == rTxAGC_B_Mcs03_Mcs00)
++	{
++		pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][10] = Data;
++		//RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][10] = 0x%lx\n", pHalData->pwrGroupCnt,
++		//	pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][10]));
++	}
++	if(RegAddr == rTxAGC_B_Mcs07_Mcs04)
++	{
++		pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][11] = Data;
++		//RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][11] = 0x%lx\n", pHalData->pwrGroupCnt,
++		//	pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][11]));
++	}
++	if(RegAddr == rTxAGC_B_Mcs11_Mcs08)
++	{
++		pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][12] = Data;
++		//RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][12] = 0x%lx\n", pHalData->pwrGroupCnt,
++		//	pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][12]));
++	}
++	if(RegAddr == rTxAGC_B_Mcs15_Mcs12)
++	{
++		pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][13] = Data;
++		//RT_TRACE(COMP_INIT, DBG_TRACE, ("MCSTxPowerLevelOriginalOffset[%d][13] = 0x%lx\n", pHalData->pwrGroupCnt,
++		//	pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][13]));
++		pHalData->pwrGroupCnt++;
++	}
++}
++/*-----------------------------------------------------------------------------
++ * Function:	phy_ConfigBBWithPgParaFile
++ *
++ * Overview:	
++ *
++ * Input:       NONE
++ *
++ * Output:      NONE
++ *
++ * Return:      NONE
++ *
++ * Revised History:
++ * When			Who		Remark
++ * 11/06/2008 	MHC		Create Version 0.
++ * 2009/07/29	tynli		(porting from 92SE branch)2009/03/11 Add copy parameter file to buffer for silent reset
++ *---------------------------------------------------------------------------*/
++static	int
++phy_ConfigBBWithPgParaFile(
++	IN	PADAPTER		Adapter,
++	IN	u8* 			pFileName)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	
++	int		rtStatus = _SUCCESS;
++
++
++	return rtStatus;
++	
++}	/* phy_ConfigBBWithPgParaFile */
++
++
++/*-----------------------------------------------------------------------------
++ * Function:	phy_ConfigBBWithPgHeaderFile
++ *
++ * Overview:	Config PHY_REG_PG array 
++ *
++ * Input:       NONE
++ *
++ * Output:      NONE
++ *
++ * Return:      NONE
++ *
++ * Revised History:
++ * When			Who		Remark
++ * 11/06/2008 	MHC		Add later!!!!!!.. Please modify for new files!!!!
++ * 11/10/2008	tynli		Modify to mew files.
++ *---------------------------------------------------------------------------*/
++static	int
++phy_ConfigBBWithPgHeaderFile(
++	IN	PADAPTER		Adapter,
++	IN	u8 			ConfigType)
++{
++	int i;
++	u32*	Rtl819XPHY_REGArray_Table_PG;
++	u16	PHY_REGArrayPGLen;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++
++	// Default: pHalData->RF_Type = RF_2T2R.
++	PHY_REGArrayPGLen = PHY_REG_Array_PGLength;
++	Rtl819XPHY_REGArray_Table_PG = Rtl819XPHY_REG_Array_PG;
++
++#ifdef CONFIG_USB_HCI
++// 2010/10/19 Chiyoko According to Alex/Willson opinion, VAU/dongle can share the same PHY_REG_PG.txt
++/*
++	if(pHalData->BoardType == BOARD_MINICARD )
++	{
++		PHY_REGArrayPGLen = PHY_REG_Array_PG_mCardLength;
++		Rtl819XPHY_REGArray_Table_PG = Rtl819XPHY_REG_Array_PG_mCard;
++	}
++	else */if(pHalData->BoardType ==BOARD_USB_High_PA )
++	{
++		PHY_REGArrayPGLen = PHY_REG_Array_PG_HPLength;
++		Rtl819XPHY_REGArray_Table_PG = Rtl819XPHY_REG_Array_PG_HP;
++	}
++#endif
++
++	if(ConfigType == BaseBand_Config_PHY_REG)
++	{
++		for(i=0;i<PHY_REGArrayPGLen;i=i+3)
++		{
++			#if 0 //without IO, no delay is neeeded...
++			if (Rtl819XPHY_REGArray_Table_PG[i] == 0xfe){
++				#ifdef CONFIG_LONG_DELAY_ISSUE
++				rtw_msleep_os(50);
++				#else
++				rtw_mdelay_os(50);
++				#endif
++			}
++			else if (Rtl819XPHY_REGArray_Table_PG[i] == 0xfd)
++				rtw_mdelay_os(5);
++			else if (Rtl819XPHY_REGArray_Table_PG[i] == 0xfc)
++				rtw_mdelay_os(1);
++			else if (Rtl819XPHY_REGArray_Table_PG[i] == 0xfb)
++				rtw_udelay_os(50);
++			else if (Rtl819XPHY_REGArray_Table_PG[i] == 0xfa)
++				rtw_udelay_os(5);
++			else if (Rtl819XPHY_REGArray_Table_PG[i] == 0xf9)
++				rtw_udelay_os(1);
++			//PHY_SetBBReg(Adapter, Rtl819XPHY_REGArray_Table_PG[i], Rtl819XPHY_REGArray_Table_PG[i+1], Rtl819XPHY_REGArray_Table_PG[i+2]);		
++			#endif
++			
++			storePwrIndexDiffRateOffset(Adapter, Rtl819XPHY_REGArray_Table_PG[i], 
++				Rtl819XPHY_REGArray_Table_PG[i+1], 
++				Rtl819XPHY_REGArray_Table_PG[i+2]);
++			//RT_TRACE(COMP_SEND, DBG_TRACE, ("The Rtl819XPHY_REGArray_Table_PG[0] is %lx Rtl819XPHY_REGArray_Table_PG[1] is %lx \n",Rtl819XPHY_REGArray_Table_PG[i], Rtl819XPHY_REGArray_Table_PG[i+1]));
++		}
++	}
++	else
++	{
++
++		//RT_TRACE(COMP_SEND, DBG_LOUD, ("phy_ConfigBBWithPgHeaderFile(): ConfigType != BaseBand_Config_PHY_REG\n"));
++	}
++	
++	return _SUCCESS;
++	
++}	/* phy_ConfigBBWithPgHeaderFile */
++
++#if (MP_DRIVER == 1)
++
++/*-----------------------------------------------------------------------------
++ * Function:    phy_ConfigBBWithMpParaFile()
++ *
++ * Overview:    This function read BB parameters from general file format, and do register
++ *			  Read/Write 
++ *
++ * Input:      	PADAPTER		Adapter
++ *			ps1Byte 			pFileName			
++ *
++ * Output:      NONE
++ *
++ * Return:      RT_STATUS_SUCCESS: configuration file exist
++ *	2008/11/06	MH	For 92S we do not support silent reset now. Disable 
++ *					parameter file compare!!!!!!??
++ *			
++ *---------------------------------------------------------------------------*/
++static	int
++phy_ConfigBBWithMpParaFile(
++	IN	PADAPTER		Adapter,
++	IN	u8* 			pFileName
++)
++{
++#if 1
++	int		rtStatus = _SUCCESS;
++#else
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	s4Byte			nLinesRead, ithLine;
++	RT_STATUS		rtStatus = RT_STATUS_SUCCESS;
++	ps1Byte 		szLine;
++	u4Byte			u4bRegOffset, u4bRegMask, u4bRegValue;
++	u4Byte			u4bMove;
++	
++	if(ADAPTER_TEST_STATUS_FLAG(Adapter, ADAPTER_STATUS_FIRST_INIT))
++	{
++		rtStatus = PlatformReadFile(
++					Adapter, 
++					pFileName,
++					(pu1Byte)(pHalData->BufOfLines),
++					MAX_LINES_HWCONFIG_TXT,
++					MAX_BYTES_LINE_HWCONFIG_TXT,
++					&nLinesRead
++					);
++		if(rtStatus == RT_STATUS_SUCCESS)
++		{
++			PlatformMoveMemory(pHalData->BufOfLines6, pHalData->BufOfLines, nLinesRead*MAX_BYTES_LINE_HWCONFIG_TXT);
++			pHalData->nLinesRead6 = nLinesRead;
++		}
++		else
++		{
++			// Temporarily skip PHY_REG_MP.txt if file does not exist.
++			pHalData->nLinesRead6 = 0;
++			RT_TRACE(COMP_INIT, DBG_LOUD, ("No matched file \r\n"));
++			return RT_STATUS_SUCCESS;
++		}
++	}
++	else
++	{
++		PlatformMoveMemory(pHalData->BufOfLines, pHalData->BufOfLines6, MAX_LINES_HWCONFIG_TXT*MAX_BYTES_LINE_HWCONFIG_TXT);
++		nLinesRead = pHalData->nLinesRead6;
++		rtStatus = RT_STATUS_SUCCESS;
++	}
++
++
++	if(rtStatus == RT_STATUS_SUCCESS)
++	{
++		RT_TRACE(COMP_INIT, DBG_LOUD, ("phy_ConfigBBWithMpParaFile(): read %s ok\n", pFileName));
++
++		for(ithLine = 0; ithLine < nLinesRead; ithLine++)
++		{
++			szLine = pHalData->BufOfLines[ithLine];
++
++			if(!IsCommentString(szLine))
++			{
++				// Get 1st hex value as register offset.
++				if(GetHexValueFromString(szLine, &u4bRegOffset, &u4bMove))
++				{
++					if(u4bRegOffset == 0xff)
++					{ // Ending.
++						break;
++					}
++					else if (u4bRegOffset == 0xfe)
++						delay_ms(50);
++					else if (u4bRegOffset == 0xfd)
++						delay_ms(5);
++					else if (u4bRegOffset == 0xfc)
++						delay_ms(1);
++					else if (u4bRegOffset == 0xfb)
++						PlatformStallExecution(50);
++					else if (u4bRegOffset == 0xfa)
++						PlatformStallExecution(5);
++					else if (u4bRegOffset == 0xf9)
++						PlatformStallExecution(1);
++					
++					// Get 2nd hex value as register value.
++					szLine += u4bMove;
++					if(GetHexValueFromString(szLine, &u4bRegValue, &u4bMove))
++					{
++						RT_TRACE(COMP_FPGA, DBG_TRACE, ("[ADDR]%03lX=%08lX\n", u4bRegOffset, u4bRegValue));
++						PHY_SetBBReg(Adapter, u4bRegOffset, bMaskDWord, u4bRegValue);
++
++						// Add 1us delay between BB/RF register setting.
++						PlatformStallExecution(1);
++					}
++				}
++			}
++		}
++	}
++	else
++	{
++		RT_TRACE(COMP_INIT, DBG_LOUD, ("phy_ConfigBBWithMpParaFile(): Failed%s\n", pFileName));
++	}
++#endif
++
++	return rtStatus;
++}
++
++/*-----------------------------------------------------------------------------
++ * Function:	phy_ConfigBBWithMpHeaderFile
++ *
++ * Overview:	Config PHY_REG_MP array 
++ *
++ * Input:       NONE
++ *
++ * Output:      NONE
++ *
++ * Return:      NONE
++ *
++ * Revised History:
++ * When			Who		Remark
++ * 02/04/2010	chiyokolin		Modify to new files.
++ *---------------------------------------------------------------------------*/
++static int
++phy_ConfigBBWithMpHeaderFile(
++	IN	PADAPTER		Adapter,
++	IN	u1Byte 			ConfigType)
++{
++	int i;
++	u32*	Rtl8192CPHY_REGArray_Table_MP;
++	u16	PHY_REGArrayMPLen;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++
++	PHY_REGArrayMPLen = PHY_REG_Array_MPLength;
++	Rtl8192CPHY_REGArray_Table_MP = Rtl819XPHY_REG_Array_MP;
++
++	if(ConfigType == BaseBand_Config_PHY_REG)
++	{
++		for(i=0;i<PHY_REGArrayMPLen;i=i+2)
++		{
++			if (Rtl8192CPHY_REGArray_Table_MP[i] == 0xfe) {
++				#ifdef CONFIG_LONG_DELAY_ISSUE
++				rtw_msleep_os(50);
++				#else
++				rtw_mdelay_os(50);
++				#endif
++			}
++			else if (Rtl8192CPHY_REGArray_Table_MP[i] == 0xfd)
++				rtw_mdelay_os(5);
++			else if (Rtl8192CPHY_REGArray_Table_MP[i] == 0xfc)
++				rtw_mdelay_os(1);
++			else if (Rtl8192CPHY_REGArray_Table_MP[i] == 0xfb) {
++				#ifdef CONFIG_LONG_DELAY_ISSUE
++				rtw_msleep_os(50);
++				#else
++				rtw_mdelay_os(50);
++				#endif
++			}
++			else if (Rtl8192CPHY_REGArray_Table_MP[i] == 0xfa)
++				rtw_mdelay_os(5);
++			else if (Rtl8192CPHY_REGArray_Table_MP[i] == 0xf9)
++				rtw_mdelay_os(1);
++			PHY_SetBBReg(Adapter, Rtl8192CPHY_REGArray_Table_MP[i], bMaskDWord, Rtl8192CPHY_REGArray_Table_MP[i+1]);		
++
++			// Add 1us delay between BB/RF register setting.
++			rtw_mdelay_os(1);
++
++//			RT_TRACE(COMP_INIT, DBG_TRACE, ("The Rtl8192CPHY_REGArray_Table_MP[%d] is %lx Rtl8192CPHY_REGArray_Table_MP[%d] is %lx \n", i, i+1, Rtl8192CPHY_REGArray_Table_MP[i], Rtl8192CPHY_REGArray_Table_MP[i+1]));
++		}
++	}
++	else
++	{
++//		RT_TRACE(COMP_SEND, DBG_LOUD, ("phy_ConfigBBWithMpHeaderFile(): ConfigType != BaseBand_Config_PHY_REG\n"));
++	}
++
++	return _SUCCESS;
++}	/* phy_ConfigBBWithMpHeaderFile */
++
++#endif	// #if (MP_DRIVER == 1)
++
++static VOID
++phy_BB8192C_Config_1T(
++	IN PADAPTER Adapter
++	)
++{
++#if 0
++	//for path - A
++	PHY_SetBBReg(Adapter, rFPGA0_TxInfo, 0x3, 0x1);
++	PHY_SetBBReg(Adapter, rFPGA1_TxInfo, 0x0303, 0x0101);
++	PHY_SetBBReg(Adapter, 0xe74, 0x0c000000, 0x1);
++	PHY_SetBBReg(Adapter, 0xe78, 0x0c000000, 0x1);
++	PHY_SetBBReg(Adapter, 0xe7c, 0x0c000000, 0x1);
++	PHY_SetBBReg(Adapter, 0xe80, 0x0c000000, 0x1);
++	PHY_SetBBReg(Adapter, 0xe88, 0x0c000000, 0x1);
++#endif
++	//for path - B
++	PHY_SetBBReg(Adapter, rFPGA0_TxInfo, 0x3, 0x2);
++	PHY_SetBBReg(Adapter, rFPGA1_TxInfo, 0x300033, 0x200022);
++
++	// 20100519 Joseph: Add for 1T2R config. Suggested by Kevin, Jenyu and Yunan.
++	PHY_SetBBReg(Adapter, rCCK0_AFESetting, bMaskByte3, 0x45);
++	PHY_SetBBReg(Adapter, rOFDM0_TRxPathEnable, bMaskByte0, 0x23);
++	PHY_SetBBReg(Adapter, rOFDM0_AGCParameter1, 0x30, 0x1);	// B path first AGC
++	
++	PHY_SetBBReg(Adapter, 0xe74, 0x0c000000, 0x2);
++	PHY_SetBBReg(Adapter, 0xe78, 0x0c000000, 0x2);
++	PHY_SetBBReg(Adapter, 0xe7c, 0x0c000000, 0x2);
++	PHY_SetBBReg(Adapter, 0xe80, 0x0c000000, 0x2);
++	PHY_SetBBReg(Adapter, 0xe88, 0x0c000000, 0x2);
++
++	
++}
++
++// Joseph test: new initialize order!!
++// Test only!! This part need to be re-organized.
++// Now it is just for 8256.
++static	int
++phy_BB8190_Config_HardCode(
++	IN	PADAPTER	Adapter
++	)
++{
++	//RT_ASSERT(FALSE, ("This function is not implement yet!! \n"));
++	return _SUCCESS;
++}
++
++static	int
++phy_BB8192C_Config_ParaFile(
++	IN	PADAPTER	Adapter
++	)
++{
++	EEPROM_EFUSE_PRIV	*pEEPROM = GET_EEPROM_EFUSE_PRIV(Adapter);
++	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(Adapter);
++	int			rtStatus = _SUCCESS;
++
++	u8				szBBRegPgFile[] = RTL819X_PHY_REG_PG;
++	
++	u8				sz88CBBRegFile[] = RTL8188C_PHY_REG;	
++	u8				sz88CAGCTableFile[] = RTL8188C_AGC_TAB;
++
++	u8				sz92CBBRegFile[] = RTL8192C_PHY_REG;	
++	u8				sz92CAGCTableFile[] = RTL8192C_AGC_TAB;
++	
++	u8				*pszBBRegFile, *pszAGCTableFile, *pszBBRegMpFile;
++	
++	//RT_TRACE(COMP_INIT, DBG_TRACE, ("==>phy_BB8192S_Config_ParaFile\n"));
++
++	if(IS_92C_SERIAL(pHalData->VersionID)){
++		pszBBRegFile=(u8*)&sz92CBBRegFile ;
++		pszAGCTableFile =(u8*)&sz92CAGCTableFile;
++	}
++	else{
++		pszBBRegFile=(u8*)&sz88CBBRegFile ;
++		pszAGCTableFile =(u8*)&sz88CAGCTableFile;
++	}
++
++	//
++	// 1. Read PHY_REG.TXT BB INIT!!
++	// We will seperate as 88C / 92C according to chip version
++	//
++#ifdef CONFIG_EMBEDDED_FWIMG
++	rtStatus = phy_ConfigBBWithHeaderFile(Adapter, BaseBand_Config_PHY_REG);	
++#else	
++	// No matter what kind of CHIP we always read PHY_REG.txt. We must copy different 
++	// type of parameter files to phy_reg.txt at first.	
++	rtStatus = phy_ConfigBBWithParaFile(Adapter,pszBBRegFile);
++#endif
++
++	if(rtStatus != _SUCCESS){
++		//RT_TRACE(COMP_INIT, DBG_SERIOUS, ("phy_BB8192S_Config_ParaFile():Write BB Reg Fail!!"));
++		goto phy_BB8190_Config_ParaFile_Fail;
++	}
++
++#if MP_DRIVER == 1
++	//
++	// 1.1 Read PHY_REG_MP.TXT BB INIT!!
++	// We will seperate as 88C / 92C according to chip version
++	//
++#ifdef CONFIG_EMBEDDED_FWIMG
++	rtStatus = phy_ConfigBBWithMpHeaderFile(Adapter, BaseBand_Config_PHY_REG);	
++#else	
++	// No matter what kind of CHIP we always read PHY_REG.txt. We must copy different 
++	// type of parameter files to phy_reg.txt at first.	
++	rtStatus = phy_ConfigBBWithMpParaFile(Adapter, pszBBRegMpFile);
++#endif
++
++	if(rtStatus != _SUCCESS){
++//		RT_TRACE(COMP_INIT, DBG_SERIOUS, ("phy_BB8192S_Config_ParaFile():Write BB Reg MP Fail!!"));
++		goto phy_BB8190_Config_ParaFile_Fail;
++	}	
++#endif	// #if (MP_DRIVER == 1)
++
++	//
++	// 20100318 Joseph: Config 2T2R to 1T2R if necessary.
++	//
++	if(pHalData->rf_type == RF_1T2R)
++	{
++		phy_BB8192C_Config_1T(Adapter);
++		DBG_8192C("phy_BB8192C_Config_ParaFile():Config to 1T!!\n");
++	}
++
++	//
++	// 2. If EEPROM or EFUSE autoload OK, We must config by PHY_REG_PG.txt
++	//
++	if (pEEPROM->bautoload_fail_flag == _FALSE)
++	{
++		pHalData->pwrGroupCnt = 0;
++
++#ifdef CONFIG_EMBEDDED_FWIMG
++		rtStatus = phy_ConfigBBWithPgHeaderFile(Adapter, BaseBand_Config_PHY_REG);
++#else
++		rtStatus = phy_ConfigBBWithPgParaFile(Adapter, (u8*)&szBBRegPgFile);
++#endif
++	}
++	
++	if(rtStatus != _SUCCESS){
++		//RT_TRACE(COMP_INIT, DBG_SERIOUS, ("phy_BB8192S_Config_ParaFile():BB_PG Reg Fail!!"));
++		goto phy_BB8190_Config_ParaFile_Fail;
++	}
++
++	//
++	// 3. BB AGC table Initialization
++	//
++#ifdef CONFIG_EMBEDDED_FWIMG
++	rtStatus = phy_ConfigBBWithHeaderFile(Adapter, BaseBand_Config_AGC_TAB);
++#else
++	//RT_TRACE(COMP_INIT, DBG_LOUD, ("phy_BB8192S_Config_ParaFile AGC_TAB.txt\n"));
++	rtStatus = phy_ConfigBBWithParaFile(Adapter, pszAGCTableFile);
++#endif
++
++	if(rtStatus != _SUCCESS){
++		//RT_TRACE(COMP_FPGA, DBG_SERIOUS, ("phy_BB8192S_Config_ParaFile():AGC Table Fail\n"));
++		goto phy_BB8190_Config_ParaFile_Fail;
++	}
++
++	// Check if the CCK HighPower is turned ON.
++	// This is used to calculate PWDB.
++	pHalData->bCckHighPower = (BOOLEAN)(PHY_QueryBBReg(Adapter, rFPGA0_XA_HSSIParameter2, 0x200));
++	
++phy_BB8190_Config_ParaFile_Fail:
++
++	return rtStatus;
++}
++
++
++int
++PHY_BBConfig8192C(
++	IN	PADAPTER	Adapter
++	)
++{
++	int	rtStatus = _SUCCESS;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	u32	RegVal;
++	u8	TmpU1B=0;
++	u8	value8;
++
++	phy_InitBBRFRegisterDefinition(Adapter);
++
++	if(IS_HARDWARE_TYPE_8723A(Adapter))
++	{
++		// Suggested by Scott. tynli_test. 2010.12.30.
++		//1. 0x28[1] = 1
++		TmpU1B = rtw_read8(Adapter, REG_AFE_PLL_CTRL);
++		rtw_udelay_os(2);
++		rtw_write8(Adapter, REG_AFE_PLL_CTRL, (TmpU1B|BIT1));
++		rtw_udelay_os(2);
++		
++		//2. 0x29[7:0] = 0xFF
++		rtw_write8(Adapter, REG_AFE_PLL_CTRL+1, 0xff);
++		rtw_udelay_os(2);
++		
++		//3. 0x02[1:0] = 2b'11
++		TmpU1B = rtw_read8(Adapter, REG_SYS_FUNC_EN);
++		rtw_write8(Adapter, REG_SYS_FUNC_EN, (TmpU1B|FEN_BB_GLB_RSTn|FEN_BBRSTB));
++		
++		//undo clock gated
++		rtw_write32(Adapter, rFPGA0_XCD_RFParameter, rtw_read32(Adapter, rFPGA0_XCD_RFParameter)&(~BIT31));
++		
++		//4. 0x25[6] = 0
++		TmpU1B = rtw_read8(Adapter, REG_AFE_XTAL_CTRL+1);
++		rtw_write8(Adapter, REG_AFE_XTAL_CTRL+1, (TmpU1B&(~BIT6)));
++		
++		//5. 0x24[20] = 0 	//Advised by SD3 Alex Wang. 2011.02.09.
++		TmpU1B = rtw_read8(Adapter, REG_AFE_XTAL_CTRL+2);
++		rtw_write8(Adapter, REG_AFE_XTAL_CTRL+2, (TmpU1B&(~BIT4)));
++		
++		//6. 0x1f[7:0] = 0x07
++		rtw_write8(Adapter, REG_RF_CTRL, 0x07);
++	}
++	else
++	{
++		// Enable BB and RF
++		RegVal = rtw_read16(Adapter, REG_SYS_FUNC_EN);
++		rtw_write16(Adapter, REG_SYS_FUNC_EN, (u16)(RegVal|BIT13|BIT0|BIT1));
++
++		// 20090923 Joseph: Advised by Steven and Jenyu. Power sequence before init RF.
++		rtw_write8(Adapter, REG_AFE_PLL_CTRL, 0x83);
++		rtw_write8(Adapter, REG_AFE_PLL_CTRL+1, 0xdb);
++
++		rtw_write8(Adapter, REG_RF_CTRL, RF_EN|RF_RSTB|RF_SDMRSTB);
++
++#ifdef CONFIG_USB_HCI
++		rtw_write8(Adapter, REG_SYS_FUNC_EN, FEN_USBA | FEN_USBD | FEN_BB_GLB_RSTn | FEN_BBRSTB);
++#else
++		rtw_write8(Adapter, REG_SYS_FUNC_EN, FEN_PPLL|FEN_PCIEA|FEN_DIO_PCIE|FEN_BB_GLB_RSTn|FEN_BBRSTB);
++#endif
++		
++		//undo clock gated
++		rtw_write32(Adapter, rFPGA0_XCD_RFParameter, rtw_read32(Adapter, rFPGA0_XCD_RFParameter)&(~BIT31));
++
++		// 2009/10/21 by SD1 Jong. Modified by tynli. Not in Documented in V8.1. 
++#ifdef CONFIG_USB_HCI
++		//To Fix MAC loopback mode fail. Suggested by SD4 Johnny. 2010.03.23.
++		rtw_write8(Adapter, REG_LDOHCI12_CTRL, 0x0f);	
++		rtw_write8(Adapter, 0x15, 0xe9);
++#endif
++
++		rtw_write8(Adapter, REG_AFE_XTAL_CTRL+1, 0x80);
++
++#ifdef CONFIG_PCI_HCI
++		// Force use left antenna by default for 88C.
++	//	if(!IS_92C_SERIAL(pHalData->VersionID) || IS_92C_1T2R(pHalData->VersionID))
++		if(Adapter->ledpriv.LedStrategy != SW_LED_MODE10)
++		{
++			RegVal = rtw_read32(Adapter, REG_LEDCFG0);
++			rtw_write32(Adapter, REG_LEDCFG0, RegVal|BIT23);
++		}
++#endif
++	}
++
++	//
++	// Config BB and AGC
++	//
++	rtStatus = phy_BB8192C_Config_ParaFile(Adapter);
++#if 0	
++	switch(Adapter->MgntInfo.bRegHwParaFile)
++	{
++		case 0:
++			phy_BB8190_Config_HardCode(Adapter);
++			break;
++
++		case 1:
++			rtStatus = phy_BB8192C_Config_ParaFile(Adapter);
++			break;
++
++		case 2:
++			// Partial Modify. 
++			phy_BB8190_Config_HardCode(Adapter);
++			phy_BB8192C_Config_ParaFile(Adapter);
++			break;
++
++		default:
++			phy_BB8190_Config_HardCode(Adapter);
++			break;
++	}
++#endif	
++#ifdef CONFIG_USB_HCI
++	if(IS_HARDWARE_TYPE_8192CU(Adapter)&&IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID)
++		&&(pHalData->BoardType == BOARD_USB_High_PA))
++			rtw_write8(Adapter, 0xc72, 0x50);		
++#endif
++
++	return rtStatus;
++}
++
++
++int
++PHY_RFConfig8192C(
++	IN	PADAPTER	Adapter
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	int		rtStatus = _SUCCESS;
++
++	//
++	// RF config
++	//
++	rtStatus = PHY_RF6052_Config8192C(Adapter);
++#if 0	
++	switch(pHalData->rf_chip)
++	{
++		case RF_6052:
++			rtStatus = PHY_RF6052_Config(Adapter);
++			break;
++		case RF_8225:
++			rtStatus = PHY_RF8225_Config(Adapter);
++			break;
++		case RF_8256:			
++			rtStatus = PHY_RF8256_Config(Adapter);
++			break;
++		case RF_8258:
++			break;
++		case RF_PSEUDO_11N:
++			rtStatus = PHY_RF8225_Config(Adapter);
++			break;
++		default: //for MacOs Warning: "RF_TYPE_MIN" not handled in switch
++			break;
++	}
++#endif
++	return rtStatus;
++}
++
++
++/*-----------------------------------------------------------------------------
++ * Function:    PHY_ConfigRFWithParaFile()
++ *
++ * Overview:    This function read RF parameters from general file format, and do RF 3-wire
++ *
++ * Input:      	PADAPTER			Adapter
++ *			ps1Byte 				pFileName			
++ *			RF_RADIO_PATH_E	eRFPath
++ *
++ * Output:      NONE
++ *
++ * Return:      RT_STATUS_SUCCESS: configuration file exist
++ *			
++ * Note:		Delay may be required for RF configuration
++ *---------------------------------------------------------------------------*/
++int
++rtl8192c_PHY_ConfigRFWithParaFile(
++	IN	PADAPTER			Adapter,
++	IN	u8* 				pFileName,
++	RF_RADIO_PATH_E		eRFPath
++)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	
++	int	rtStatus = _SUCCESS;
++
++
++	return rtStatus;
++	
++}
++
++//****************************************
++// The following is for High Power PA
++//****************************************
++#define HighPowerRadioAArrayLen 22
++//This is for High power PA
++u32 Rtl8192S_HighPower_RadioA_Array[HighPowerRadioAArrayLen] = {
++0x013,0x00029ea4,
++0x013,0x00025e74,
++0x013,0x00020ea4,
++0x013,0x0001ced0,
++0x013,0x00019f40,
++0x013,0x00014e70,
++0x013,0x000106a0,
++0x013,0x0000c670,
++0x013,0x000082a0,
++0x013,0x00004270,
++0x013,0x00000240,
++};
++
++int
++PHY_ConfigRFExternalPA(
++	IN	PADAPTER			Adapter,
++	RF_RADIO_PATH_E		eRFPath
++)
++{
++	int	rtStatus = _SUCCESS;
++#ifdef CONFIG_USB_HCI
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	u16 i=0;
++
++	if(!pHalData->ExternalPA)
++	{
++		return rtStatus;
++	}
++	
++	// 2010/10/19 MH According to Jenyu/EEChou 's opinion, we need not to execute the 
++	// same code as SU. It is already updated in radio_a_1T_HP.txt.
++#if 0	
++	//add for SU High Power PA
++	for(i = 0;i<HighPowerRadioAArrayLen; i=i+2)
++	{
++		RT_TRACE(COMP_INIT, DBG_LOUD, ("External PA, write RF 0x%lx=0x%lx\n", Rtl8192S_HighPower_RadioA_Array[i], Rtl8192S_HighPower_RadioA_Array[i+1]));
++		PHY_SetRFReg(Adapter, eRFPath, Rtl8192S_HighPower_RadioA_Array[i], bRFRegOffsetMask, Rtl8192S_HighPower_RadioA_Array[i+1]);
++	}
++#endif
++
++#endif
++	return rtStatus;
++}
++//****************************************
++/*-----------------------------------------------------------------------------
++ * Function:    PHY_ConfigRFWithHeaderFile()
++ *
++ * Overview:    This function read RF parameters from general file format, and do RF 3-wire
++ *
++ * Input:      	PADAPTER			Adapter
++ *			ps1Byte 				pFileName			
++ *			RF_RADIO_PATH_E	eRFPath
++ *
++ * Output:      NONE
++ *
++ * Return:      RT_STATUS_SUCCESS: configuration file exist
++ *			
++ * Note:		Delay may be required for RF configuration
++ *---------------------------------------------------------------------------*/
++int
++rtl8192c_PHY_ConfigRFWithHeaderFile(
++	IN	PADAPTER			Adapter,
++	RF_RADIO_PATH_E		eRFPath
++)
++{
++
++	int			i;
++	int			rtStatus = _SUCCESS;
++	u32*		Rtl819XRadioA_Array_Table;
++	u32*		Rtl819XRadioB_Array_Table;
++	u16		RadioA_ArrayLen,RadioB_ArrayLen;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	
++	//
++	// 2009.11.24. Modified by tynli.
++	//
++	if(IS_92C_SERIAL(pHalData->VersionID))
++	{
++		RadioA_ArrayLen = RadioA_2TArrayLength;
++		Rtl819XRadioA_Array_Table = Rtl819XRadioA_2TArray;
++		RadioB_ArrayLen = RadioB_2TArrayLength;
++		Rtl819XRadioB_Array_Table = Rtl819XRadioB_2TArray;
++	}
++	else
++	{
++		RadioA_ArrayLen = RadioA_1TArrayLength;
++		Rtl819XRadioA_Array_Table = Rtl819XRadioA_1TArray;
++		RadioB_ArrayLen = RadioB_1TArrayLength;	
++		Rtl819XRadioB_Array_Table = Rtl819XRadioB_1TArray;
++#ifdef CONFIG_USB_HCI
++		if( BOARD_MINICARD == pHalData->BoardType )
++		{
++			RadioA_ArrayLen = RadioA_1T_mCardArrayLength;
++			Rtl819XRadioA_Array_Table = Rtl819XRadioA_1T_mCardArray;
++			RadioB_ArrayLen = RadioB_1T_mCardArrayLength;	
++			Rtl819XRadioB_Array_Table = Rtl819XRadioB_1T_mCardArray;			
++		}
++		else if( BOARD_USB_High_PA == pHalData->BoardType )
++		{
++			RadioA_ArrayLen = RadioA_1T_HPArrayLength;
++			Rtl819XRadioA_Array_Table = Rtl819XRadioA_1T_HPArray;
++		}
++#endif
++	}
++
++	switch(eRFPath){
++		case RF_PATH_A:
++			#ifdef CONFIG_IOL_RF_RF90_PATH_A
++			if(rtw_IOL_applied(Adapter))
++			{
++				struct xmit_frame	*xmit_frame;
++				if((xmit_frame=rtw_IOL_accquire_xmit_frame(Adapter)) == NULL) {
++					rtStatus = _FAIL;
++					goto exit;
++				}
++				
++				for(i = 0;i<RadioA_ArrayLen; i=i+2)
++				{
++					if(Rtl819XRadioA_Array_Table[i] == 0xfe)
++						rtw_IOL_append_DELAY_MS_cmd(xmit_frame, 50);
++					else if (Rtl819XRadioA_Array_Table[i] == 0xfd)
++						rtw_IOL_append_DELAY_MS_cmd(xmit_frame, 5);
++					else if (Rtl819XRadioA_Array_Table[i] == 0xfc)
++						rtw_IOL_append_DELAY_MS_cmd(xmit_frame, 1);
++					else if (Rtl819XRadioA_Array_Table[i] == 0xfb)
++						rtw_IOL_append_DELAY_US_cmd(xmit_frame, 50);
++					else if (Rtl819XRadioA_Array_Table[i] == 0xfa)
++						rtw_IOL_append_DELAY_US_cmd(xmit_frame, 5);
++					else if (Rtl819XRadioA_Array_Table[i] == 0xf9)
++						rtw_IOL_append_DELAY_US_cmd(xmit_frame, 1);
++					else
++					{
++						BB_REGISTER_DEFINITION_T	*pPhyReg = &pHalData->PHYRegDef[eRFPath];
++						u32	NewOffset = 0;
++						u32	DataAndAddr = 0;
++						
++						NewOffset = Rtl819XRadioA_Array_Table[i] & 0x3f;
++						DataAndAddr = ((NewOffset<<20) | (Rtl819XRadioA_Array_Table[i+1]&0x000fffff)) & 0x0fffffff;	// T65 RF
++						rtw_IOL_append_WD_cmd(xmit_frame, pPhyReg->rf3wireOffset, DataAndAddr);
++					}
++				}	
++				rtStatus = rtw_IOL_exec_cmds_sync(Adapter, xmit_frame, 1000);
++			}
++			else
++			#endif
++			{
++				for(i = 0;i<RadioA_ArrayLen; i=i+2)
++				{
++					if(Rtl819XRadioA_Array_Table[i] == 0xfe) {
++						#ifdef CONFIG_LONG_DELAY_ISSUE
++						rtw_msleep_os(50);
++						#else
++						rtw_mdelay_os(50);
++						#endif
++					}
++					else if (Rtl819XRadioA_Array_Table[i] == 0xfd)
++						rtw_mdelay_os(5);
++					else if (Rtl819XRadioA_Array_Table[i] == 0xfc)
++						rtw_mdelay_os(1);
++					else if (Rtl819XRadioA_Array_Table[i] == 0xfb)
++						rtw_udelay_os(50);
++					else if (Rtl819XRadioA_Array_Table[i] == 0xfa)
++						rtw_udelay_os(5);
++					else if (Rtl819XRadioA_Array_Table[i] == 0xf9)
++						rtw_udelay_os(1);
++					else
++					{
++						PHY_SetRFReg(Adapter, eRFPath, Rtl819XRadioA_Array_Table[i], bRFRegOffsetMask, Rtl819XRadioA_Array_Table[i+1]);
++						// Add 1us delay between BB/RF register setting.
++						rtw_udelay_os(1);
++					}
++				}
++			}
++
++			//Add for High Power PA
++			PHY_ConfigRFExternalPA(Adapter, eRFPath);
++			break;
++		case RF_PATH_B:
++			#ifdef CONFIG_IOL_RF_RF90_PATH_B
++			if(rtw_IOL_applied(Adapter))
++			{
++				struct xmit_frame	*xmit_frame;
++				if((xmit_frame=rtw_IOL_accquire_xmit_frame(Adapter)) == NULL) {
++					rtStatus = _FAIL;
++					goto exit;
++				}
++			
++				for(i = 0;i<RadioB_ArrayLen; i=i+2)
++				{
++					if(Rtl819XRadioB_Array_Table[i] == 0xfe)
++						rtw_IOL_append_DELAY_MS_cmd(xmit_frame, 50);
++					else if (Rtl819XRadioB_Array_Table[i] == 0xfd)
++						rtw_IOL_append_DELAY_MS_cmd(xmit_frame, 5);
++					else if (Rtl819XRadioB_Array_Table[i] == 0xfc)
++						rtw_IOL_append_DELAY_MS_cmd(xmit_frame, 1);
++					else if (Rtl819XRadioB_Array_Table[i] == 0xfb)
++						rtw_IOL_append_DELAY_US_cmd(xmit_frame, 50);
++					else if (Rtl819XRadioB_Array_Table[i] == 0xfa)
++						rtw_IOL_append_DELAY_US_cmd(xmit_frame, 5);
++					else if (Rtl819XRadioB_Array_Table[i] == 0xf9)
++						rtw_IOL_append_DELAY_US_cmd(xmit_frame, 1);
++					else
++					{
++						BB_REGISTER_DEFINITION_T	*pPhyReg = &pHalData->PHYRegDef[eRFPath];
++						u32	NewOffset = 0;
++						u32	DataAndAddr = 0;
++						
++						NewOffset = Rtl819XRadioB_Array_Table[i] & 0x3f;
++						DataAndAddr = ((NewOffset<<20) | (Rtl819XRadioB_Array_Table[i+1]&0x000fffff)) & 0x0fffffff;	// T65 RF
++						rtw_IOL_append_WD_cmd(xmit_frame, pPhyReg->rf3wireOffset, DataAndAddr);
++					}
++				}	
++				rtStatus = rtw_IOL_exec_cmds_sync(Adapter, xmit_frame, 1000);
++			}
++			else
++			#endif
++			{
++				for(i = 0;i<RadioB_ArrayLen; i=i+2)
++				{
++					if(Rtl819XRadioB_Array_Table[i] == 0xfe)
++					{ // Deay specific ms. Only RF configuration require delay.												
++#if 0//#ifdef CONFIG_USB_HCI
++						#ifdef CONFIG_LONG_DELAY_ISSUE
++						rtw_msleep_os(1000);
++						#else
++						rtw_mdelay_os(1000);
++						#endif
++#else
++						#ifdef CONFIG_LONG_DELAY_ISSUE
++						rtw_msleep_os(50);
++						#else
++						rtw_mdelay_os(50);
++						#endif
++#endif
++					}
++					else if (Rtl819XRadioB_Array_Table[i] == 0xfd)
++						rtw_mdelay_os(5);
++					else if (Rtl819XRadioB_Array_Table[i] == 0xfc)
++						rtw_mdelay_os(1);
++					else if (Rtl819XRadioB_Array_Table[i] == 0xfb)
++						rtw_udelay_os(50);
++					else if (Rtl819XRadioB_Array_Table[i] == 0xfa)
++						rtw_udelay_os(5);
++					else if (Rtl819XRadioB_Array_Table[i] == 0xf9)
++						rtw_udelay_os(1);
++					else
++					{
++						PHY_SetRFReg(Adapter, eRFPath, Rtl819XRadioB_Array_Table[i], bRFRegOffsetMask, Rtl819XRadioB_Array_Table[i+1]);
++						// Add 1us delay between BB/RF register setting.
++						rtw_udelay_os(1);
++					}	
++				}
++			}
++
++			break;
++		case RF_PATH_C:
++			break;
++		case RF_PATH_D:
++			break;
++	}
++
++exit:	
++	return rtStatus;
++
++}
++
++
++/*-----------------------------------------------------------------------------
++ * Function:    PHY_CheckBBAndRFOK()
++ *
++ * Overview:    This function is write register and then readback to make sure whether
++ *			  BB[PHY0, PHY1], RF[Patha, path b, path c, path d] is Ok
++ *
++ * Input:      	PADAPTER			Adapter
++ *			HW90_BLOCK_E		CheckBlock
++ *			RF_RADIO_PATH_E	eRFPath		// it is used only when CheckBlock is HW90_BLOCK_RF
++ *
++ * Output:      NONE
++ *
++ * Return:      RT_STATUS_SUCCESS: PHY is OK
++ *			
++ * Note:		This function may be removed in the ASIC
++ *---------------------------------------------------------------------------*/
++int
++PHY_CheckBBAndRFOK(
++	IN	PADAPTER			Adapter,
++	IN	HW90_BLOCK_E		CheckBlock,
++	IN	RF_RADIO_PATH_E	eRFPath
++	)
++{
++	int			rtStatus = _SUCCESS;
++
++	u32				i, CheckTimes = 4,ulRegRead = 0;
++
++	u32				WriteAddr[4];
++	u32				WriteData[] = {0xfffff027, 0xaa55a02f, 0x00000027, 0x55aa502f};
++
++	// Initialize register address offset to be checked
++	WriteAddr[HW90_BLOCK_MAC] = 0x100;
++	WriteAddr[HW90_BLOCK_PHY0] = 0x900;
++	WriteAddr[HW90_BLOCK_PHY1] = 0x800;
++	WriteAddr[HW90_BLOCK_RF] = 0x3;
++	
++	for(i=0 ; i < CheckTimes ; i++)
++	{
++
++		//
++		// Write Data to register and readback
++		//
++		switch(CheckBlock)
++		{
++		case HW90_BLOCK_MAC:
++			//RT_ASSERT(FALSE, ("PHY_CheckBBRFOK(): Never Write 0x100 here!"));
++			//RT_TRACE(COMP_INIT, DBG_LOUD, ("PHY_CheckBBRFOK(): Never Write 0x100 here!\n"));
++			break;
++			
++		case HW90_BLOCK_PHY0:
++		case HW90_BLOCK_PHY1:
++			rtw_write32(Adapter, WriteAddr[CheckBlock], WriteData[i]);
++			ulRegRead = rtw_read32(Adapter, WriteAddr[CheckBlock]);
++			break;
++
++		case HW90_BLOCK_RF:
++			// When initialization, we want the delay function(delay_ms(), delay_us() 
++			// ==> actually we call PlatformStallExecution()) to do NdisStallExecution()
++			// [busy wait] instead of NdisMSleep(). So we acquire RT_INITIAL_SPINLOCK 
++			// to run at Dispatch level to achive it.	
++			//cosa PlatformAcquireSpinLock(Adapter, RT_INITIAL_SPINLOCK);
++			WriteData[i] &= 0xfff;
++			PHY_SetRFReg(Adapter, eRFPath, WriteAddr[HW90_BLOCK_RF], bRFRegOffsetMask, WriteData[i]);
++			// TODO: we should not delay for such a long time. Ask SD3
++			rtw_mdelay_os(10);
++			ulRegRead = PHY_QueryRFReg(Adapter, eRFPath, WriteAddr[HW90_BLOCK_RF], bMaskDWord);				
++			rtw_mdelay_os(10);
++			//cosa PlatformReleaseSpinLock(Adapter, RT_INITIAL_SPINLOCK);
++			break;
++			
++		default:
++			rtStatus = _FAIL;
++			break;
++		}
++
++
++		//
++		// Check whether readback data is correct
++		//
++		if(ulRegRead != WriteData[i])
++		{
++			//RT_TRACE(COMP_FPGA, DBG_LOUD, ("ulRegRead: %lx, WriteData: %lx \n", ulRegRead, WriteData[i]));
++			rtStatus = _FAIL;			
++			break;
++		}
++	}
++
++	return rtStatus;
++}
++
++
++VOID
++rtl8192c_PHY_GetHWRegOriginalValue(
++	IN	PADAPTER		Adapter
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	
++	// read rx initial gain
++	pHalData->DefaultInitialGain[0] = (u8)PHY_QueryBBReg(Adapter, rOFDM0_XAAGCCore1, bMaskByte0);
++	pHalData->DefaultInitialGain[1] = (u8)PHY_QueryBBReg(Adapter, rOFDM0_XBAGCCore1, bMaskByte0);
++	pHalData->DefaultInitialGain[2] = (u8)PHY_QueryBBReg(Adapter, rOFDM0_XCAGCCore1, bMaskByte0);
++	pHalData->DefaultInitialGain[3] = (u8)PHY_QueryBBReg(Adapter, rOFDM0_XDAGCCore1, bMaskByte0);
++	//RT_TRACE(COMP_INIT, DBG_LOUD,
++	//("Default initial gain (c50=0x%x, c58=0x%x, c60=0x%x, c68=0x%x) \n", 
++	//pHalData->DefaultInitialGain[0], pHalData->DefaultInitialGain[1], 
++	//pHalData->DefaultInitialGain[2], pHalData->DefaultInitialGain[3]));
++
++	// read framesync
++	pHalData->framesync = (u8)PHY_QueryBBReg(Adapter, rOFDM0_RxDetector3, bMaskByte0);	 
++	pHalData->framesyncC34 = PHY_QueryBBReg(Adapter, rOFDM0_RxDetector2, bMaskDWord);
++	//RT_TRACE(COMP_INIT, DBG_LOUD, ("Default framesync (0x%x) = 0x%x \n", 
++	//	rOFDM0_RxDetector3, pHalData->framesync));
++}
++
++
++//
++//	Description:
++//		Map dBm into Tx power index according to 
++//		current HW model, for example, RF and PA, and
++//		current wireless mode.
++//	By Bruce, 2008-01-29.
++//
++static	u8
++phy_DbmToTxPwrIdx(
++	IN	PADAPTER		Adapter,
++	IN	WIRELESS_MODE	WirelessMode,
++	IN	int			PowerInDbm
++	)
++{
++	u8				TxPwrIdx = 0;
++	int				Offset = 0;
++	
++
++	//
++	// Tested by MP, we found that CCK Index 0 equals to 8dbm, OFDM legacy equals to 
++	// 3dbm, and OFDM HT equals to 0dbm repectively.
++	// Note:
++	//	The mapping may be different by different NICs. Do not use this formula for what needs accurate result.  
++	// By Bruce, 2008-01-29.
++	// 
++	switch(WirelessMode)
++	{
++	case WIRELESS_MODE_B:
++		Offset = -7;
++		break;
++
++	case WIRELESS_MODE_G:
++	case WIRELESS_MODE_N_24G:
++		Offset = -8;
++		break;
++	default:
++		Offset = -8;
++		break;
++	}
++
++	if((PowerInDbm - Offset) > 0)
++	{
++		TxPwrIdx = (u8)((PowerInDbm - Offset) * 2);
++	}
++	else
++	{
++		TxPwrIdx = 0;
++	}
++
++	// Tx Power Index is too large.
++	if(TxPwrIdx > MAX_TXPWR_IDX_NMODE_92S)
++		TxPwrIdx = MAX_TXPWR_IDX_NMODE_92S;
++
++	return TxPwrIdx;
++}
++
++//
++//	Description:
++//		Map Tx power index into dBm according to 
++//		current HW model, for example, RF and PA, and
++//		current wireless mode.
++//	By Bruce, 2008-01-29.
++//
++int
++phy_TxPwrIdxToDbm(
++	IN	PADAPTER		Adapter,
++	IN	WIRELESS_MODE	WirelessMode,
++	IN	u8			TxPwrIdx
++	)
++{
++	int				Offset = 0;
++	int				PwrOutDbm = 0;
++	
++	//
++	// Tested by MP, we found that CCK Index 0 equals to -7dbm, OFDM legacy equals to -8dbm.
++	// Note:
++	//	The mapping may be different by different NICs. Do not use this formula for what needs accurate result.  
++	// By Bruce, 2008-01-29.
++	// 
++	switch(WirelessMode)
++	{
++	case WIRELESS_MODE_B:
++		Offset = -7;
++		break;
++
++	case WIRELESS_MODE_G:
++	case WIRELESS_MODE_N_24G:
++		Offset = -8;
++	default:
++		Offset = -8;	
++		break;
++	}
++
++	PwrOutDbm = TxPwrIdx / 2 + Offset; // Discard the decimal part.
++
++	return PwrOutDbm;
++}
++
++
++/*-----------------------------------------------------------------------------
++ * Function:    GetTxPowerLevel8190()
++ *
++ * Overview:    This function is export to "common" moudule
++ *
++ * Input:       PADAPTER		Adapter
++ *			psByte			Power Level
++ *
++ * Output:      NONE
++ *
++ * Return:      NONE
++ *
++ *---------------------------------------------------------------------------*/
++VOID
++PHY_GetTxPowerLevel8192C(
++	IN	PADAPTER		Adapter,
++	OUT u32*    		powerlevel
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	u8			TxPwrLevel = 0;
++	int			TxPwrDbm;
++	
++	//
++	// Because the Tx power indexes are different, we report the maximum of them to 
++	// meet the CCX TPC request. By Bruce, 2008-01-31.
++	//
++
++	// CCK
++	TxPwrLevel = pHalData->CurrentCckTxPwrIdx;
++	TxPwrDbm = phy_TxPwrIdxToDbm(Adapter, WIRELESS_MODE_B, TxPwrLevel);
++
++	// Legacy OFDM
++	TxPwrLevel = pHalData->CurrentOfdm24GTxPwrIdx + pHalData->LegacyHTTxPowerDiff;
++
++	// Compare with Legacy OFDM Tx power.
++	if(phy_TxPwrIdxToDbm(Adapter, WIRELESS_MODE_G, TxPwrLevel) > TxPwrDbm)
++		TxPwrDbm = phy_TxPwrIdxToDbm(Adapter, WIRELESS_MODE_G, TxPwrLevel);
++
++	// HT OFDM
++	TxPwrLevel = pHalData->CurrentOfdm24GTxPwrIdx;
++	
++	// Compare with HT OFDM Tx power.
++	if(phy_TxPwrIdxToDbm(Adapter, WIRELESS_MODE_N_24G, TxPwrLevel) > TxPwrDbm)
++		TxPwrDbm = phy_TxPwrIdxToDbm(Adapter, WIRELESS_MODE_N_24G, TxPwrLevel);
++
++	*powerlevel = TxPwrDbm;
++}
++
++
++static void getTxPowerIndex(
++	IN	PADAPTER		Adapter,
++	IN	u8			channel,
++	IN OUT u8*		cckPowerLevel,
++	IN OUT u8*		ofdmPowerLevel
++	)
++{
++	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(Adapter);
++	u8				index = (channel -1);
++	// 1. CCK
++	cckPowerLevel[RF_PATH_A] = pHalData->TxPwrLevelCck[RF_PATH_A][index];	//RF-A
++	cckPowerLevel[RF_PATH_B] = pHalData->TxPwrLevelCck[RF_PATH_B][index];	//RF-B
++
++	// 2. OFDM for 1S or 2S
++	if (GET_RF_TYPE(Adapter) == RF_1T2R || GET_RF_TYPE(Adapter) == RF_1T1R)
++	{
++		// Read HT 40 OFDM TX power
++		ofdmPowerLevel[RF_PATH_A] = pHalData->TxPwrLevelHT40_1S[RF_PATH_A][index];
++		ofdmPowerLevel[RF_PATH_B] = pHalData->TxPwrLevelHT40_1S[RF_PATH_B][index];
++	}
++	else if (GET_RF_TYPE(Adapter) == RF_2T2R)
++	{
++		// Read HT 40 OFDM TX power
++		ofdmPowerLevel[RF_PATH_A] = pHalData->TxPwrLevelHT40_2S[RF_PATH_A][index];
++		ofdmPowerLevel[RF_PATH_B] = pHalData->TxPwrLevelHT40_2S[RF_PATH_B][index];
++	}
++	//RTPRINT(FPHY, PHY_TXPWR, ("Channel-%d, set tx power index !!\n", channel));
++}
++
++static void ccxPowerIndexCheck(
++	IN	PADAPTER		Adapter,
++	IN	u8			channel,
++	IN OUT u8*		cckPowerLevel,
++	IN OUT u8*		ofdmPowerLevel
++	)
++{
++#if 0
++	PMGNT_INFO			pMgntInfo = &(Adapter->MgntInfo);
++	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(Adapter);
++	PRT_CCX_INFO		pCcxInfo = GET_CCX_INFO(pMgntInfo);
++
++	//
++	// CCX 2 S31, AP control of client transmit power:
++	// 1. We shall not exceed Cell Power Limit as possible as we can.
++	// 2. Tolerance is +/- 5dB.
++	// 3. 802.11h Power Contraint takes higher precedence over CCX Cell Power Limit.
++	// 
++	// TODO: 
++	// 1. 802.11h power contraint 
++	//
++	// 071011, by rcnjko.
++	//
++	if(	pMgntInfo->OpMode == RT_OP_MODE_INFRASTRUCTURE && 
++		pMgntInfo->mAssoc &&
++		pCcxInfo->bUpdateCcxPwr &&
++		pCcxInfo->bWithCcxCellPwr &&
++		channel == pMgntInfo->dot11CurrentChannelNumber)
++	{
++		u1Byte	CckCellPwrIdx = phy_DbmToTxPwrIdx(Adapter, WIRELESS_MODE_B, pCcxInfo->CcxCellPwr);
++		u1Byte	LegacyOfdmCellPwrIdx = phy_DbmToTxPwrIdx(Adapter, WIRELESS_MODE_G, pCcxInfo->CcxCellPwr);
++		u1Byte	OfdmCellPwrIdx = phy_DbmToTxPwrIdx(Adapter, WIRELESS_MODE_N_24G, pCcxInfo->CcxCellPwr);
++
++		RT_TRACE(COMP_TXAGC, DBG_LOUD, 
++		("CCX Cell Limit: %d dbm => CCK Tx power index : %d, Legacy OFDM Tx power index : %d, OFDM Tx power index: %d\n", 
++		pCcxInfo->CcxCellPwr, CckCellPwrIdx, LegacyOfdmCellPwrIdx, OfdmCellPwrIdx));
++		RT_TRACE(COMP_TXAGC, DBG_LOUD, 
++		("EEPROM channel(%d) => CCK Tx power index: %d, Legacy OFDM Tx power index : %d, OFDM Tx power index: %d\n",
++		channel, cckPowerLevel[0], ofdmPowerLevel[0] + pHalData->LegacyHTTxPowerDiff, ofdmPowerLevel[0])); 
++
++		// CCK
++		if(cckPowerLevel[0] > CckCellPwrIdx)
++			cckPowerLevel[0] = CckCellPwrIdx;
++		// Legacy OFDM, HT OFDM
++		if(ofdmPowerLevel[0] + pHalData->LegacyHTTxPowerDiff > LegacyOfdmCellPwrIdx)
++		{
++			if((OfdmCellPwrIdx - pHalData->LegacyHTTxPowerDiff) > 0)
++			{
++				ofdmPowerLevel[0] = OfdmCellPwrIdx - pHalData->LegacyHTTxPowerDiff;
++			}
++			else
++			{
++				ofdmPowerLevel[0] = 0;
++			}
++		}
++
++		RT_TRACE(COMP_TXAGC, DBG_LOUD, 
++		("Altered CCK Tx power index : %d, Legacy OFDM Tx power index: %d, OFDM Tx power index: %d\n", 
++		cckPowerLevel[0], ofdmPowerLevel[0] + pHalData->LegacyHTTxPowerDiff, ofdmPowerLevel[0]));
++	}
++
++	pHalData->CurrentCckTxPwrIdx = cckPowerLevel[0];
++	pHalData->CurrentOfdm24GTxPwrIdx = ofdmPowerLevel[0];
++
++	RT_TRACE(COMP_TXAGC, DBG_LOUD, 
++		("PHY_SetTxPowerLevel8192S(): CCK Tx power index : %d, Legacy OFDM Tx power index: %d, OFDM Tx power index: %d\n", 
++		cckPowerLevel[0], ofdmPowerLevel[0] + pHalData->LegacyHTTxPowerDiff, ofdmPowerLevel[0]));
++#endif	
++}
++/*-----------------------------------------------------------------------------
++ * Function:    SetTxPowerLevel8190()
++ *
++ * Overview:    This function is export to "HalCommon" moudule
++ *			We must consider RF path later!!!!!!!
++ *
++ * Input:       PADAPTER		Adapter
++ *			u1Byte		channel
++ *
++ * Output:      NONE
++ *
++ * Return:      NONE
++ *	2008/11/04	MHC		We remove EEPROM_93C56.
++ *						We need to move CCX relative code to independet file.
++ *	2009/01/21	MHC		Support new EEPROM format from SD3 requirement.
++ *
++ *---------------------------------------------------------------------------*/
++VOID
++PHY_SetTxPowerLevel8192C(
++	IN	PADAPTER		Adapter,
++	IN	u8			channel
++	)
++{
++	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(Adapter);
++	u8	cckPowerLevel[2], ofdmPowerLevel[2];	// [0]:RF-A, [1]:RF-B
++
++#if(MP_DRIVER == 1)
++	return;
++#endif
++
++	if(pHalData->bTXPowerDataReadFromEEPORM == _FALSE)
++		return;
++
++	getTxPowerIndex(Adapter, channel, &cckPowerLevel[0], &ofdmPowerLevel[0]);
++	//RTPRINT(FPHY, PHY_TXPWR, ("Channel-%d, cckPowerLevel (A / B) = 0x%x / 0x%x,   ofdmPowerLevel (A / B) = 0x%x / 0x%x\n", 
++	//	channel, cckPowerLevel[0], cckPowerLevel[1], ofdmPowerLevel[0], ofdmPowerLevel[1]));
++
++	ccxPowerIndexCheck(Adapter, channel, &cckPowerLevel[0], &ofdmPowerLevel[0]);
++
++	rtl8192c_PHY_RF6052SetCckTxPower(Adapter, &cckPowerLevel[0]);
++	rtl8192c_PHY_RF6052SetOFDMTxPower(Adapter, &ofdmPowerLevel[0], channel);
++
++#if 0
++	switch(pHalData->rf_chip)
++	{
++		case RF_8225:
++			PHY_SetRF8225CckTxPower(Adapter, cckPowerLevel[0]);
++			PHY_SetRF8225OfdmTxPower(Adapter, ofdmPowerLevel[0]);
++		break;
++
++		case RF_8256:
++			PHY_SetRF8256CCKTxPower(Adapter, cckPowerLevel[0]);
++			PHY_SetRF8256OFDMTxPower(Adapter, ofdmPowerLevel[0]);
++			break;
++
++		case RF_6052:
++			PHY_RF6052SetCckTxPower(Adapter, &cckPowerLevel[0]);
++			PHY_RF6052SetOFDMTxPower(Adapter, &ofdmPowerLevel[0], channel);
++			break;
++
++		case RF_8258:
++			break;
++	}
++#endif
++
++}
++
++
++//
++//	Description:
++//		Update transmit power level of all channel supported.
++//
++//	TODO: 
++//		A mode.
++//	By Bruce, 2008-02-04.
++//
++BOOLEAN
++PHY_UpdateTxPowerDbm8192C(
++	IN	PADAPTER	Adapter,
++	IN	int		powerInDbm
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	u8				idx;
++	u8			rf_path;
++
++	// TODO: A mode Tx power.
++	u8	CckTxPwrIdx = phy_DbmToTxPwrIdx(Adapter, WIRELESS_MODE_B, powerInDbm);
++	u8	OfdmTxPwrIdx = phy_DbmToTxPwrIdx(Adapter, WIRELESS_MODE_N_24G, powerInDbm);
++
++	if(OfdmTxPwrIdx - pHalData->LegacyHTTxPowerDiff > 0)
++		OfdmTxPwrIdx -= pHalData->LegacyHTTxPowerDiff;
++	else
++		OfdmTxPwrIdx = 0;
++
++	//RT_TRACE(COMP_TXAGC, DBG_LOUD, ("PHY_UpdateTxPowerDbm8192S(): %ld dBm , CckTxPwrIdx = %d, OfdmTxPwrIdx = %d\n", powerInDbm, CckTxPwrIdx, OfdmTxPwrIdx));
++
++	for(idx = 0; idx < 14; idx++)
++	{
++		for (rf_path = 0; rf_path < 2; rf_path++)
++		{
++			pHalData->TxPwrLevelCck[rf_path][idx] = CckTxPwrIdx;
++			pHalData->TxPwrLevelHT40_1S[rf_path][idx] = 
++			pHalData->TxPwrLevelHT40_2S[rf_path][idx] = OfdmTxPwrIdx;
++		}
++	}
++
++	//Adapter->HalFunc.SetTxPowerLevelHandler(Adapter, pHalData->CurrentChannel);//gtest:todo
++
++	return _TRUE;	
++}
++
++
++/*
++	Description:
++		When beacon interval is changed, the values of the 
++		hw registers should be modified.
++	By tynli, 2008.10.24.
++
++*/
++
++
++void	
++rtl8192c_PHY_SetBeaconHwReg(	
++	IN	PADAPTER		Adapter,
++	IN	u16			BeaconInterval	
++	)
++{
++
++}
++
++
++VOID 
++PHY_ScanOperationBackup8192C(
++	IN	PADAPTER	Adapter,
++	IN	u8		Operation
++	)
++{
++#if 0
++	IO_TYPE	IoType;
++	
++	if(!Adapter->bDriverStopped)
++	{
++		switch(Operation)
++		{
++			case SCAN_OPT_BACKUP:
++				IoType = IO_CMD_PAUSE_DM_BY_SCAN;
++				rtw_hal_set_hwreg(Adapter,HW_VAR_IO_CMD,  (pu1Byte)&IoType);
++
++				break;
++
++			case SCAN_OPT_RESTORE:
++				IoType = IO_CMD_RESUME_DM_BY_SCAN;
++				rtw_hal_set_hwreg(Adapter,HW_VAR_IO_CMD,  (pu1Byte)&IoType);
++				break;
++
++			default:
++				RT_TRACE(COMP_SCAN, DBG_LOUD, ("Unknown Scan Backup Operation. \n"));
++				break;
++		}
++	}
++#endif	
++}
++
++/*-----------------------------------------------------------------------------
++ * Function:    PHY_SetBWModeCallback8192C()
++ *
++ * Overview:    Timer callback function for SetSetBWMode
++ *
++ * Input:       	PRT_TIMER		pTimer
++ *
++ * Output:      NONE
++ *
++ * Return:      NONE
++ *
++ * Note:		(1) We do not take j mode into consideration now
++ *			(2) Will two workitem of "switch channel" and "switch channel bandwidth" run
++ *			     concurrently?
++ *---------------------------------------------------------------------------*/
++static VOID
++_PHY_SetBWMode92C(
++	IN	PADAPTER	Adapter
++)
++{
++//	PADAPTER			Adapter = (PADAPTER)pTimer->Adapter;
++	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(Adapter);
++	u8				regBwOpMode;
++	u8				regRRSR_RSC;
++
++	//return;
++
++	// Added it for 20/40 mhz switch time evaluation by guangan 070531
++	//u4Byte				NowL, NowH;
++	//u8Byte				BeginTime, EndTime; 
++
++	/*RT_TRACE(COMP_SCAN, DBG_LOUD, ("==>PHY_SetBWModeCallback8192C()  Switch to %s bandwidth\n", \
++					pHalData->CurrentChannelBW == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz"))*/
++
++	if(pHalData->rf_chip == RF_PSEUDO_11N)
++	{
++		//pHalData->SetBWModeInProgress= _FALSE;
++		return;
++	}
++
++	// There is no 40MHz mode in RF_8225.
++	if(pHalData->rf_chip==RF_8225)
++		return;
++
++	if(Adapter->bDriverStopped)
++		return;
++
++	// Added it for 20/40 mhz switch time evaluation by guangan 070531
++	//NowL = PlatformEFIORead4Byte(Adapter, TSFR);
++	//NowH = PlatformEFIORead4Byte(Adapter, TSFR+4);
++	//BeginTime = ((u8Byte)NowH << 32) + NowL;
++		
++	//3//
++	//3//<1>Set MAC register
++	//3//
++	//Adapter->HalFunc.SetBWModeHandler();
++	
++	regBwOpMode = rtw_read8(Adapter, REG_BWOPMODE);
++	regRRSR_RSC = rtw_read8(Adapter, REG_RRSR+2);
++	//regBwOpMode = rtw_hal_get_hwreg(Adapter,HW_VAR_BWMODE,(pu1Byte)&regBwOpMode);
++	
++	switch(pHalData->CurrentChannelBW)
++	{
++		case HT_CHANNEL_WIDTH_20:
++			regBwOpMode |= BW_OPMODE_20MHZ;
++			   // 2007/02/07 Mark by Emily becasue we have not verify whether this register works
++			rtw_write8(Adapter, REG_BWOPMODE, regBwOpMode);
++			break;
++			   
++		case HT_CHANNEL_WIDTH_40:
++			regBwOpMode &= ~BW_OPMODE_20MHZ;
++				// 2007/02/07 Mark by Emily becasue we have not verify whether this register works
++			rtw_write8(Adapter, REG_BWOPMODE, regBwOpMode);
++
++			regRRSR_RSC = (regRRSR_RSC&0x90) |(pHalData->nCur40MhzPrimeSC<<5);
++			rtw_write8(Adapter, REG_RRSR+2, regRRSR_RSC);
++			break;
++
++		default:
++			/*RT_TRACE(COMP_DBG, DBG_LOUD, ("PHY_SetBWModeCallback8192C():
++						unknown Bandwidth: %#X\n",pHalData->CurrentChannelBW));*/
++			break;
++	}
++	
++	//3//
++	//3//<2>Set PHY related register
++	//3//
++	switch(pHalData->CurrentChannelBW)
++	{
++		/* 20 MHz channel*/
++		case HT_CHANNEL_WIDTH_20:
++			PHY_SetBBReg(Adapter, rFPGA0_RFMOD, bRFMOD, 0x0);
++			PHY_SetBBReg(Adapter, rFPGA1_RFMOD, bRFMOD, 0x0);
++			PHY_SetBBReg(Adapter, rFPGA0_AnalogParameter2, BIT10, 1);
++			
++			break;
++
++
++		/* 40 MHz channel*/
++		case HT_CHANNEL_WIDTH_40:
++			PHY_SetBBReg(Adapter, rFPGA0_RFMOD, bRFMOD, 0x1);
++			PHY_SetBBReg(Adapter, rFPGA1_RFMOD, bRFMOD, 0x1);
++			
++			// Set Control channel to upper or lower. These settings are required only for 40MHz
++			PHY_SetBBReg(Adapter, rCCK0_System, bCCKSideBand, (pHalData->nCur40MhzPrimeSC>>1));
++			PHY_SetBBReg(Adapter, rOFDM1_LSTF, 0xC00, pHalData->nCur40MhzPrimeSC);
++			PHY_SetBBReg(Adapter, rFPGA0_AnalogParameter2, BIT10, 0);
++
++			PHY_SetBBReg(Adapter, 0x818, (BIT26|BIT27), (pHalData->nCur40MhzPrimeSC==HAL_PRIME_CHNL_OFFSET_LOWER)?2:1);
++			
++			break;
++
++
++			
++		default:
++			/*RT_TRACE(COMP_DBG, DBG_LOUD, ("PHY_SetBWModeCallback8192C(): unknown Bandwidth: %#X\n"\
++						,pHalData->CurrentChannelBW));*/
++			break;
++			
++	}
++	//Skip over setting of J-mode in BB register here. Default value is "None J mode". Emily 20070315
++
++	// Added it for 20/40 mhz switch time evaluation by guangan 070531
++	//NowL = PlatformEFIORead4Byte(Adapter, TSFR);
++	//NowH = PlatformEFIORead4Byte(Adapter, TSFR+4);
++	//EndTime = ((u8Byte)NowH << 32) + NowL;
++	//RT_TRACE(COMP_SCAN, DBG_LOUD, ("SetBWModeCallback8190Pci: time of SetBWMode = %I64d us!\n", (EndTime - BeginTime)));
++
++	//3<3>Set RF related register
++	switch(pHalData->rf_chip)
++	{
++		case RF_8225:		
++			//PHY_SetRF8225Bandwidth(Adapter, pHalData->CurrentChannelBW);
++			break;	
++			
++		case RF_8256:
++			// Please implement this function in Hal8190PciPhy8256.c
++			//PHY_SetRF8256Bandwidth(Adapter, pHalData->CurrentChannelBW);
++			break;
++			
++		case RF_8258:
++			// Please implement this function in Hal8190PciPhy8258.c
++			// PHY_SetRF8258Bandwidth();
++			break;
++
++		case RF_PSEUDO_11N:
++			// Do Nothing
++			break;
++			
++		case RF_6052:
++			rtl8192c_PHY_RF6052SetBandwidth(Adapter, pHalData->CurrentChannelBW);
++			break;	
++			
++		default:
++			//RT_ASSERT(FALSE, ("Unknown RFChipID: %d\n", pHalData->RFChipID));
++			break;
++	}
++
++	//pHalData->SetBWModeInProgress= FALSE;
++
++	//RT_TRACE(COMP_SCAN, DBG_LOUD, ("<==PHY_SetBWModeCallback8192C() \n" ));
++}
++
++
++ /*-----------------------------------------------------------------------------
++ * Function:   SetBWMode8190Pci()
++ *
++ * Overview:  This function is export to "HalCommon" moudule
++ *
++ * Input:       	PADAPTER			Adapter
++ *			HT_CHANNEL_WIDTH	Bandwidth	//20M or 40M
++ *
++ * Output:      NONE
++ *
++ * Return:      NONE
++ *
++ * Note:		We do not take j mode into consideration now
++ *---------------------------------------------------------------------------*/
++VOID
++PHY_SetBWMode8192C(
++	IN	PADAPTER					Adapter,
++	IN	HT_CHANNEL_WIDTH	Bandwidth,	// 20M or 40M
++	IN	unsigned char	Offset		// Upper, Lower, or Don't care
++)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	HT_CHANNEL_WIDTH 	tmpBW= pHalData->CurrentChannelBW;
++	// Modified it for 20/40 mhz switch by guangan 070531
++	//PMGNT_INFO	pMgntInfo=&Adapter->MgntInfo;
++
++	//return;
++	
++	//if(pHalData->SwChnlInProgress)
++//	if(pMgntInfo->bScanInProgress)
++//	{
++//		RT_TRACE(COMP_SCAN, DBG_LOUD, ("PHY_SetBWMode8192C() %s Exit because bScanInProgress!\n", 
++//					Bandwidth == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz"));
++//		return;
++//	}
++
++//	if(pHalData->SetBWModeInProgress)
++//	{
++//		// Modified it for 20/40 mhz switch by guangan 070531
++//		RT_TRACE(COMP_SCAN, DBG_LOUD, ("PHY_SetBWMode8192C() %s cancel last timer because SetBWModeInProgress!\n", 
++//					Bandwidth == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz"));
++//		PlatformCancelTimer(Adapter, &pHalData->SetBWModeTimer);
++//		//return;
++//	}
++
++	//if(pHalData->SetBWModeInProgress)
++	//	return;
++
++	//pHalData->SetBWModeInProgress= TRUE;
++	
++	pHalData->CurrentChannelBW = Bandwidth;
++
++#if 0
++	if(Offset==HT_EXTCHNL_OFFSET_LOWER)
++		pHalData->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_UPPER;
++	else if(Offset==HT_EXTCHNL_OFFSET_UPPER)
++		pHalData->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_LOWER;
++	else
++		pHalData->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++#else
++	pHalData->nCur40MhzPrimeSC = Offset;
++#endif
++
++	if((!Adapter->bDriverStopped) && (!Adapter->bSurpriseRemoved))
++	{
++#ifdef USE_WORKITEM	
++		//PlatformScheduleWorkItem(&(pHalData->SetBWModeWorkItem));
++#else
++	#if 0
++		//PlatformSetTimer(Adapter, &(pHalData->SetBWModeTimer), 0);
++	#else
++		_PHY_SetBWMode92C(Adapter);
++	#endif
++#endif		
++	}
++	else
++	{
++		//RT_TRACE(COMP_SCAN, DBG_LOUD, ("PHY_SetBWMode8192C() SetBWModeInProgress FALSE driver sleep or unload\n"));	
++		//pHalData->SetBWModeInProgress= FALSE;	
++		pHalData->CurrentChannelBW = tmpBW;
++	}
++	
++}
++
++
++static void _PHY_SwChnl8192C(PADAPTER Adapter, u8 channel)
++{
++	u8 eRFPath;
++	u32 param1, param2;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++
++	if ( Adapter->bNotifyChannelChange )
++	{
++		DBG_871X( "[%s] ch = %d\n", __FUNCTION__, channel );
++	}
++
++	//s1. pre common command - CmdID_SetTxPowerLevel
++	PHY_SetTxPowerLevel8192C(Adapter, channel);
++
++	//s2. RF dependent command - CmdID_RF_WriteReg, param1=RF_CHNLBW, param2=channel
++	param1 = RF_CHNLBW;
++	param2 = channel;
++	for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
++	{
++		pHalData->RfRegChnlVal[eRFPath] = ((pHalData->RfRegChnlVal[eRFPath] & 0xfffffc00) | param2);
++		PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)eRFPath, param1, bRFRegOffsetMask, pHalData->RfRegChnlVal[eRFPath]);
++	}
++	
++	
++	//s3. post common command - CmdID_End, None
++
++}
++
++VOID
++PHY_SwChnl8192C(	// Call after initialization
++	IN	PADAPTER	Adapter,
++	IN	u8		channel
++	)
++{
++	//PADAPTER Adapter =  ADJUST_TO_ADAPTIVE_ADAPTER(pAdapter, _TRUE);
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	u8	tmpchannel = pHalData->CurrentChannel;
++	BOOLEAN  bResult = _TRUE;
++
++	if(pHalData->rf_chip == RF_PSEUDO_11N)
++	{
++		//pHalData->SwChnlInProgress=FALSE;
++		return; 								//return immediately if it is peudo-phy	
++	}
++	
++	//if(pHalData->SwChnlInProgress)
++	//	return;
++
++	//if(pHalData->SetBWModeInProgress)
++	//	return;
++
++	//--------------------------------------------
++	switch(pHalData->CurrentWirelessMode)
++	{
++		case WIRELESS_MODE_A:
++		case WIRELESS_MODE_N_5G:
++			//RT_ASSERT((channel>14), ("WIRELESS_MODE_A but channel<=14"));		
++			break;
++		
++		case WIRELESS_MODE_B:
++			//RT_ASSERT((channel<=14), ("WIRELESS_MODE_B but channel>14"));
++			break;
++		
++		case WIRELESS_MODE_G:
++		case WIRELESS_MODE_N_24G:
++			//RT_ASSERT((channel<=14), ("WIRELESS_MODE_G but channel>14"));
++			break;
++
++		default:
++			//RT_ASSERT(FALSE, ("Invalid WirelessMode(%#x)!!\n", pHalData->CurrentWirelessMode));
++			break;
++	}
++	//--------------------------------------------
++	
++	//pHalData->SwChnlInProgress = TRUE;
++	if(channel == 0)
++		channel = 1;
++	
++	pHalData->CurrentChannel=channel;
++
++	//pHalData->SwChnlStage=0;
++	//pHalData->SwChnlStep=0;
++
++	if((!Adapter->bDriverStopped) && (!Adapter->bSurpriseRemoved))
++	{
++#ifdef USE_WORKITEM	
++		//bResult = PlatformScheduleWorkItem(&(pHalData->SwChnlWorkItem));
++#else
++		#if 0		
++		//PlatformSetTimer(Adapter, &(pHalData->SwChnlTimer), 0);
++		#else
++		_PHY_SwChnl8192C(Adapter, channel);
++		#endif
++#endif
++		if(bResult)
++		{
++			//RT_TRACE(COMP_SCAN, DBG_LOUD, ("PHY_SwChnl8192C SwChnlInProgress TRUE schdule workitem done\n"));
++		}
++		else
++		{
++			//RT_TRACE(COMP_SCAN, DBG_LOUD, ("PHY_SwChnl8192C SwChnlInProgress FALSE schdule workitem error\n"));		
++			//if(IS_HARDWARE_TYPE_8192SU(Adapter))
++			//{
++			//	pHalData->SwChnlInProgress = FALSE; 	
++				pHalData->CurrentChannel = tmpchannel;			
++			//}
++		}
++
++	}
++	else
++	{
++		//RT_TRACE(COMP_SCAN, DBG_LOUD, ("PHY_SwChnl8192C SwChnlInProgress FALSE driver sleep or unload\n"));	
++		//if(IS_HARDWARE_TYPE_8192SU(Adapter))
++		//{
++		//	pHalData->SwChnlInProgress = FALSE;		
++			pHalData->CurrentChannel = tmpchannel;
++		//}
++	}
++}
++
++
++static	BOOLEAN
++phy_SwChnlStepByStep(
++	IN	PADAPTER	Adapter,
++	IN	u8		channel,
++	IN	u8		*stage,
++	IN	u8		*step,
++	OUT u32		*delay
++	)
++{
++#if 0
++	HAL_DATA_TYPE			*pHalData = GET_HAL_DATA(Adapter);
++	PCHANNEL_ACCESS_SETTING	pChnlAccessSetting;
++	SwChnlCmd				PreCommonCmd[MAX_PRECMD_CNT];
++	u4Byte					PreCommonCmdCnt;
++	SwChnlCmd				PostCommonCmd[MAX_POSTCMD_CNT];
++	u4Byte					PostCommonCmdCnt;
++	SwChnlCmd				RfDependCmd[MAX_RFDEPENDCMD_CNT];
++	u4Byte					RfDependCmdCnt;
++	SwChnlCmd				*CurrentCmd;	
++	u1Byte					eRFPath;	
++	u4Byte					RfTXPowerCtrl;
++	BOOLEAN					bAdjRfTXPowerCtrl = _FALSE;
++	
++	
++	RT_ASSERT((Adapter != NULL), ("Adapter should not be NULL\n"));
++#if(MP_DRIVER != 1)
++	RT_ASSERT(IsLegalChannel(Adapter, channel), ("illegal channel: %d\n", channel));
++#endif
++	RT_ASSERT((pHalData != NULL), ("pHalData should not be NULL\n"));
++	
++	pChnlAccessSetting = &Adapter->MgntInfo.Info8185.ChannelAccessSetting;
++	RT_ASSERT((pChnlAccessSetting != NULL), ("pChnlAccessSetting should not be NULL\n"));
++	
++	//for(eRFPath = RF_PATH_A; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
++	//for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
++	//{
++		// <1> Fill up pre common command.
++	PreCommonCmdCnt = 0;
++	phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, MAX_PRECMD_CNT, 
++				CmdID_SetTxPowerLevel, 0, 0, 0);
++	phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, MAX_PRECMD_CNT, 
++				CmdID_End, 0, 0, 0);
++	
++		// <2> Fill up post common command.
++	PostCommonCmdCnt = 0;
++
++	phy_SetSwChnlCmdArray(PostCommonCmd, PostCommonCmdCnt++, MAX_POSTCMD_CNT, 
++				CmdID_End, 0, 0, 0);
++	
++		// <3> Fill up RF dependent command.
++	RfDependCmdCnt = 0;
++	switch( pHalData->RFChipID )
++	{
++		case RF_8225:		
++		RT_ASSERT((channel >= 1 && channel <= 14), ("illegal channel for Zebra: %d\n", channel));
++		// 2008/09/04 MH Change channel. 
++		if(channel==14) channel++;
++		phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, 
++			CmdID_RF_WriteReg, rZebra1_Channel, (0x10+channel-1), 10);
++		phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, 
++		CmdID_End, 0, 0, 0);
++		break;	
++		
++	case RF_8256:
++		// TEST!! This is not the table for 8256!!
++		RT_ASSERT((channel >= 1 && channel <= 14), ("illegal channel for Zebra: %d\n", channel));
++		phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, 
++			CmdID_RF_WriteReg, rRfChannel, channel, 10);
++		phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, 
++		CmdID_End, 0, 0, 0);
++		break;
++		
++	case RF_6052:
++		RT_ASSERT((channel >= 1 && channel <= 14), ("illegal channel for Zebra: %d\n", channel));
++		phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, 
++			CmdID_RF_WriteReg, RF_CHNLBW, channel, 10);		
++		phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, 
++		CmdID_End, 0, 0, 0);		
++		
++		break;
++
++	case RF_8258:
++		break;
++
++	// For FPGA two MAC verification
++	case RF_PSEUDO_11N:
++		return TRUE;
++	default:
++		RT_ASSERT(FALSE, ("Unknown RFChipID: %d\n", pHalData->RFChipID));
++		return FALSE;
++		break;
++	}
++
++	
++	do{
++		switch(*stage)
++		{
++		case 0:
++			CurrentCmd=&PreCommonCmd[*step];
++			break;
++		case 1:
++			CurrentCmd=&RfDependCmd[*step];
++			break;
++		case 2:
++			CurrentCmd=&PostCommonCmd[*step];
++			break;
++		}
++		
++		if(CurrentCmd->CmdID==CmdID_End)
++		{
++			if((*stage)==2)
++			{
++				return TRUE;
++			}
++			else
++			{
++				(*stage)++;
++				(*step)=0;
++				continue;
++			}
++		}
++		
++		switch(CurrentCmd->CmdID)
++		{
++		case CmdID_SetTxPowerLevel:
++			PHY_SetTxPowerLevel8192C(Adapter,channel);
++			break;
++		case CmdID_WritePortUlong:
++			PlatformEFIOWrite4Byte(Adapter, CurrentCmd->Para1, CurrentCmd->Para2);
++			break;
++		case CmdID_WritePortUshort:
++			PlatformEFIOWrite2Byte(Adapter, CurrentCmd->Para1, (u2Byte)CurrentCmd->Para2);
++			break;
++		case CmdID_WritePortUchar:
++			PlatformEFIOWrite1Byte(Adapter, CurrentCmd->Para1, (u1Byte)CurrentCmd->Para2);
++			break;
++		case CmdID_RF_WriteReg:	// Only modify channel for the register now !!!!!
++			for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
++			{
++#if 1
++				pHalData->RfRegChnlVal[eRFPath] = ((pHalData->RfRegChnlVal[eRFPath] & 0xfffffc00) | CurrentCmd->Para2);
++				PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, bRFRegOffsetMask, pHalData->RfRegChnlVal[eRFPath]);
++#else
++				PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, bRFRegOffsetMask, (CurrentCmd->Para2));
++#endif
++			}
++			break;
++		}
++		
++		break;
++	}while(TRUE);
++	//cosa }/*for(Number of RF paths)*/
++
++	(*delay)=CurrentCmd->msDelay;
++	(*step)++;
++	return FALSE;
++#endif	
++	return _TRUE;
++}
++
++
++static	BOOLEAN
++phy_SetSwChnlCmdArray(
++	SwChnlCmd*		CmdTable,
++	u32			CmdTableIdx,
++	u32			CmdTableSz,
++	SwChnlCmdID		CmdID,
++	u32			Para1,
++	u32			Para2,
++	u32			msDelay
++	)
++{
++	SwChnlCmd* pCmd;
++
++	if(CmdTable == NULL)
++	{
++		//RT_ASSERT(FALSE, ("phy_SetSwChnlCmdArray(): CmdTable cannot be NULL.\n"));
++		return _FALSE;
++	}
++	if(CmdTableIdx >= CmdTableSz)
++	{
++		//RT_ASSERT(FALSE, 
++		//		("phy_SetSwChnlCmdArray(): Access invalid index, please check size of the table, CmdTableIdx:%ld, CmdTableSz:%ld\n",
++		//		CmdTableIdx, CmdTableSz));
++		return _FALSE;
++	}
++
++	pCmd = CmdTable + CmdTableIdx;
++	pCmd->CmdID = CmdID;
++	pCmd->Para1 = Para1;
++	pCmd->Para2 = Para2;
++	pCmd->msDelay = msDelay;
++
++	return _TRUE;
++}
++
++
++static	void
++phy_FinishSwChnlNow(	// We should not call this function directly
++		IN	PADAPTER	Adapter,
++		IN	u8		channel
++		)
++{
++#if 0
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	u32			delay;
++  
++	while(!phy_SwChnlStepByStep(Adapter,channel,&pHalData->SwChnlStage,&pHalData->SwChnlStep,&delay))
++	{
++		if(delay>0)
++			rtw_mdelay_os(delay);
++	}
++#endif	
++}
++
++
++
++//
++// Description:
++//	Switch channel synchronously. Called by SwChnlByDelayHandler.
++//
++// Implemented by Bruce, 2008-02-14.
++// The following procedure is operted according to SwChanlCallback8190Pci().
++// However, this procedure is performed synchronously  which should be running under
++// passive level.
++// 
++VOID
++PHY_SwChnlPhy8192C(	// Only called during initialize
++	IN	PADAPTER	Adapter,
++	IN	u8		channel
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++
++	//RT_TRACE(COMP_SCAN | COMP_RM, DBG_LOUD, ("==>PHY_SwChnlPhy8192S(), switch from channel %d to channel %d.\n", pHalData->CurrentChannel, channel));
++
++	// Cannot IO.
++	//if(RT_CANNOT_IO(Adapter))
++	//	return;
++
++	// Channel Switching is in progress.
++	//if(pHalData->SwChnlInProgress)
++	//	return;
++	
++	//return immediately if it is peudo-phy
++	if(pHalData->rf_chip == RF_PSEUDO_11N)
++	{
++		//pHalData->SwChnlInProgress=FALSE;
++		return;
++	}
++	
++	//pHalData->SwChnlInProgress = TRUE;
++	if( channel == 0)
++		channel = 1;
++	
++	pHalData->CurrentChannel=channel;
++	
++	//pHalData->SwChnlStage = 0;
++	//pHalData->SwChnlStep = 0;
++	
++	phy_FinishSwChnlNow(Adapter,channel);
++	
++	//pHalData->SwChnlInProgress = FALSE;
++}
++
++
++//
++//	Description:
++//		Configure H/W functionality to enable/disable Monitor mode.
++//		Note, because we possibly need to configure BB and RF in this function, 
++//		so caller should in PASSIVE_LEVEL. 080118, by rcnjko.
++//
++VOID
++PHY_SetMonitorMode8192C(
++	IN	PADAPTER			pAdapter,
++	IN	BOOLEAN				bEnableMonitorMode
++	)
++{
++#if 0
++	HAL_DATA_TYPE		*pHalData	= GET_HAL_DATA(pAdapter);
++	BOOLEAN				bFilterOutNonAssociatedBSSID = FALSE;
++
++	//2 Note: we may need to stop antenna diversity.
++	if(bEnableMonitorMode)
++	{
++		bFilterOutNonAssociatedBSSID = FALSE;
++		RT_TRACE(COMP_RM, DBG_LOUD, ("PHY_SetMonitorMode8192S(): enable monitor mode\n"));
++
++		pHalData->bInMonitorMode = TRUE;
++		pAdapter->HalFunc.AllowAllDestAddrHandler(pAdapter, TRUE, TRUE);
++		rtw_hal_set_hwreg(pAdapter, HW_VAR_CHECK_BSSID, (pu1Byte)&bFilterOutNonAssociatedBSSID);
++	}
++	else
++	{
++		bFilterOutNonAssociatedBSSID = TRUE;
++		RT_TRACE(COMP_RM, DBG_LOUD, ("PHY_SetMonitorMode8192S(): disable monitor mode\n"));
++
++		pAdapter->HalFunc.AllowAllDestAddrHandler(pAdapter, FALSE, TRUE);
++		pHalData->bInMonitorMode = FALSE;
++		rtw_hal_set_hwreg(pAdapter, HW_VAR_CHECK_BSSID, (pu1Byte)&bFilterOutNonAssociatedBSSID);
++	}
++#endif	
++}
++
++
++/*-----------------------------------------------------------------------------
++ * Function:	PHYCheckIsLegalRfPath8190Pci()
++ *
++ * Overview:	Check different RF type to execute legal judgement. If RF Path is illegal
++ *			We will return false.
++ *
++ * Input:		NONE
++ *
++ * Output:		NONE
++ *
++ * Return:		NONE
++ *
++ * Revised History:
++ *	When		Who		Remark
++ *	11/15/2007	MHC		Create Version 0.  
++ *
++ *---------------------------------------------------------------------------*/
++BOOLEAN	
++PHY_CheckIsLegalRfPath8192C(	
++	IN	PADAPTER	pAdapter,
++	IN	u32	eRFPath)
++{
++//	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	BOOLEAN				rtValue = _TRUE;
++
++	// NOt check RF Path now.!
++#if 0	
++	if (pHalData->RF_Type == RF_1T2R && eRFPath != RF_PATH_A)
++	{		
++		rtValue = FALSE;
++	}
++	if (pHalData->RF_Type == RF_1T2R && eRFPath != RF_PATH_A)
++	{
++
++	}
++#endif
++	return	rtValue;
++
++}	/* PHY_CheckIsLegalRfPath8192C */
++
++//-------------------------------------------------------------------------
++//
++//	IQK
++//
++//-------------------------------------------------------------------------
++#define MAX_TOLERANCE		5
++#define IQK_DELAY_TIME		1 	//ms
++
++static u8			//bit0 = 1 => Tx OK, bit1 = 1 => Rx OK
++_PHY_PathA_IQK(
++	IN	PADAPTER	pAdapter,
++	IN	BOOLEAN		configPathB
++	)
++{
++	u32 regEAC, regE94, regE9C, regEA4;
++	u8 result = 0x00;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++
++	//RTPRINT(FINIT, INIT_IQK, ("Path A IQK!\n"));
++
++	//path-A IQK setting
++	//RTPRINT(FINIT, INIT_IQK, ("Path-A IQK setting!\n"));
++	PHY_SetBBReg(pAdapter, rTx_IQK_Tone_A, bMaskDWord, 0x10008c1f);
++	PHY_SetBBReg(pAdapter, rRx_IQK_Tone_A, bMaskDWord, 0x10008c1f);
++	PHY_SetBBReg(pAdapter, rTx_IQK_PI_A, bMaskDWord, 0x82140102);
++
++	PHY_SetBBReg(pAdapter, rRx_IQK_PI_A, bMaskDWord, configPathB ? 0x28160202 : 
++		IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID)?0x28160202:0x28160502);
++
++	//path-B IQK setting
++	if(configPathB)
++	{
++		PHY_SetBBReg(pAdapter, rTx_IQK_Tone_B, bMaskDWord, 0x10008c22);
++		PHY_SetBBReg(pAdapter, rRx_IQK_Tone_B, bMaskDWord, 0x10008c22);
++		PHY_SetBBReg(pAdapter, rTx_IQK_PI_B, bMaskDWord, 0x82140102);
++		PHY_SetBBReg(pAdapter, rRx_IQK_PI_B, bMaskDWord, 0x28160202);
++	}
++
++	//LO calibration setting
++	//RTPRINT(FINIT, INIT_IQK, ("LO calibration setting!\n"));
++	PHY_SetBBReg(pAdapter, rIQK_AGC_Rsp, bMaskDWord, 0x001028d1);
++
++	//One shot, path A LOK & IQK
++	//RTPRINT(FINIT, INIT_IQK, ("One shot, path A LOK & IQK!\n"));
++	PHY_SetBBReg(pAdapter, rIQK_AGC_Pts, bMaskDWord, 0xf9000000);
++	PHY_SetBBReg(pAdapter, rIQK_AGC_Pts, bMaskDWord, 0xf8000000);
++	
++	// delay x ms
++	//RTPRINT(FINIT, INIT_IQK, ("Delay %d ms for One shot, path A LOK & IQK.\n", IQK_DELAY_TIME));
++	rtw_udelay_os(IQK_DELAY_TIME*1000);//PlatformStallExecution(IQK_DELAY_TIME*1000);
++
++	// Check failed
++	regEAC = PHY_QueryBBReg(pAdapter, rRx_Power_After_IQK_A_2, bMaskDWord);
++	//RTPRINT(FINIT, INIT_IQK, ("0xeac = 0x%x\n", regEAC));
++	regE94 = PHY_QueryBBReg(pAdapter, rTx_Power_Before_IQK_A, bMaskDWord);
++	//RTPRINT(FINIT, INIT_IQK, ("0xe94 = 0x%x\n", regE94));
++	regE9C= PHY_QueryBBReg(pAdapter, rTx_Power_After_IQK_A, bMaskDWord);
++	//RTPRINT(FINIT, INIT_IQK, ("0xe9c = 0x%x\n", regE9C));
++	regEA4= PHY_QueryBBReg(pAdapter, rRx_Power_Before_IQK_A_2, bMaskDWord);
++	//RTPRINT(FINIT, INIT_IQK, ("0xea4 = 0x%x\n", regEA4));
++
++        if(!(regEAC & BIT28) &&		
++		(((regE94 & 0x03FF0000)>>16) != 0x142) &&
++		(((regE9C & 0x03FF0000)>>16) != 0x42) )
++		result |= 0x01;
++	else							//if Tx not OK, ignore Rx
++		return result;
++
++	if(!(regEAC & BIT27) &&		//if Tx is OK, check whether Rx is OK
++		(((regEA4 & 0x03FF0000)>>16) != 0x132) &&
++		(((regEAC & 0x03FF0000)>>16) != 0x36))
++		result |= 0x02;
++	else
++		DBG_8192C("Path A Rx IQK fail!!\n");
++	
++	return result;
++
++
++}
++
++static u8				//bit0 = 1 => Tx OK, bit1 = 1 => Rx OK
++_PHY_PathB_IQK(
++	IN	PADAPTER	pAdapter
++	)
++{
++	u32 regEAC, regEB4, regEBC, regEC4, regECC;
++	u8	result = 0x00;
++	//RTPRINT(FINIT, INIT_IQK, ("Path B IQK!\n"));
++
++	//One shot, path B LOK & IQK
++	//RTPRINT(FINIT, INIT_IQK, ("One shot, path A LOK & IQK!\n"));
++	PHY_SetBBReg(pAdapter, rIQK_AGC_Cont, bMaskDWord, 0x00000002);
++	PHY_SetBBReg(pAdapter, rIQK_AGC_Cont, bMaskDWord, 0x00000000);
++
++	// delay x ms
++	//RTPRINT(FINIT, INIT_IQK, ("Delay %d ms for One shot, path B LOK & IQK.\n", IQK_DELAY_TIME));
++	rtw_udelay_os(IQK_DELAY_TIME*1000);//PlatformStallExecution(IQK_DELAY_TIME*1000);
++
++	// Check failed
++	regEAC = PHY_QueryBBReg(pAdapter, rRx_Power_After_IQK_A_2, bMaskDWord);
++	//RTPRINT(FINIT, INIT_IQK, ("0xeac = 0x%x\n", regEAC));
++	regEB4 = PHY_QueryBBReg(pAdapter, rTx_Power_Before_IQK_B, bMaskDWord);
++	//RTPRINT(FINIT, INIT_IQK, ("0xeb4 = 0x%x\n", regEB4));
++	regEBC= PHY_QueryBBReg(pAdapter, rTx_Power_After_IQK_B, bMaskDWord);
++	//RTPRINT(FINIT, INIT_IQK, ("0xebc = 0x%x\n", regEBC));
++	regEC4= PHY_QueryBBReg(pAdapter, rRx_Power_Before_IQK_B_2, bMaskDWord);
++	//RTPRINT(FINIT, INIT_IQK, ("0xec4 = 0x%x\n", regEC4));
++	regECC= PHY_QueryBBReg(pAdapter, rRx_Power_After_IQK_B_2, bMaskDWord);
++	//RTPRINT(FINIT, INIT_IQK, ("0xecc = 0x%x\n", regECC));
++
++	if(!(regEAC & BIT31) &&
++		(((regEB4 & 0x03FF0000)>>16) != 0x142) &&
++		(((regEBC & 0x03FF0000)>>16) != 0x42))
++		result |= 0x01;
++	else
++		return result;
++
++	if(!(regEAC & BIT30) &&
++		(((regEC4 & 0x03FF0000)>>16) != 0x132) &&
++		(((regECC & 0x03FF0000)>>16) != 0x36))
++		result |= 0x02;
++	else
++		DBG_8192C("Path B Rx IQK fail!!\n");
++	
++
++	return result;
++
++}
++
++static VOID
++_PHY_PathAFillIQKMatrix(
++	IN	PADAPTER	pAdapter,
++	IN 	BOOLEAN    	bIQKOK,
++	IN	int			result[][8],
++	IN	u8			final_candidate,
++	IN 	BOOLEAN		bTxOnly
++	)
++{
++	u32	Oldval_0, X, TX0_A, reg;
++	s32	Y, TX0_C;
++
++	DBG_8192C("Path A IQ Calibration %s !\n",(bIQKOK)?"Success":"Failed");
++
++	if(final_candidate == 0xFF)
++		return;
++	else if(bIQKOK)
++	{
++		Oldval_0 = (PHY_QueryBBReg(pAdapter, rOFDM0_XATxIQImbalance, bMaskDWord) >> 22) & 0x3FF;
++
++		X = result[final_candidate][0];
++		if ((X & 0x00000200) != 0)
++			X = X | 0xFFFFFC00;
++		TX0_A = (X * Oldval_0) >> 8;
++		//RTPRINT(FINIT, INIT_IQK, ("X = 0x%lx, TX0_A = 0x%lx, Oldval_0 0x%lx\n", X, TX0_A, Oldval_0));
++		PHY_SetBBReg(pAdapter, rOFDM0_XATxIQImbalance, 0x3FF, TX0_A);
++		PHY_SetBBReg(pAdapter, rOFDM0_ECCAThreshold, BIT(31), ((X* Oldval_0>>7) & 0x1));
++
++		Y = result[final_candidate][1];
++		if ((Y & 0x00000200) != 0)
++			Y = Y | 0xFFFFFC00;
++		TX0_C = (Y * Oldval_0) >> 8;
++		//RTPRINT(FINIT, INIT_IQK, ("Y = 0x%lx, TX = 0x%lx\n", Y, TX0_C));
++		PHY_SetBBReg(pAdapter, rOFDM0_XCTxAFE, 0xF0000000, ((TX0_C&0x3C0)>>6));
++		PHY_SetBBReg(pAdapter, rOFDM0_XATxIQImbalance, 0x003F0000, (TX0_C&0x3F));
++		PHY_SetBBReg(pAdapter, rOFDM0_ECCAThreshold, BIT(29), ((Y* Oldval_0>>7) & 0x1));
++
++	        if(bTxOnly)
++		{
++			DBG_8192C("_PHY_PathAFillIQKMatrix only Tx OK\n");
++			return;
++		}
++
++		reg = result[final_candidate][2];
++		PHY_SetBBReg(pAdapter, rOFDM0_XARxIQImbalance, 0x3FF, reg);
++
++		reg = result[final_candidate][3] & 0x3F;
++		PHY_SetBBReg(pAdapter, rOFDM0_XARxIQImbalance, 0xFC00, reg);
++
++		reg = (result[final_candidate][3] >> 6) & 0xF;
++		PHY_SetBBReg(pAdapter, rOFDM0_RxIQExtAnta, 0xF0000000, reg);
++	}
++}
++
++static VOID
++_PHY_PathBFillIQKMatrix(
++	IN	PADAPTER	pAdapter,
++	IN	BOOLEAN   	bIQKOK,
++	IN	int			result[][8],
++	IN	u8			final_candidate,
++	IN	BOOLEAN		bTxOnly			//do Tx only
++	)
++{
++	u32	Oldval_1, X, TX1_A, reg;
++	s32	Y, TX1_C;
++	
++	DBG_8192C("Path B IQ Calibration %s !\n",(bIQKOK)?"Success":"Failed");
++
++	if(final_candidate == 0xFF)
++		return;
++	else if(bIQKOK)
++	{
++		Oldval_1 = (PHY_QueryBBReg(pAdapter, rOFDM0_XBTxIQImbalance, bMaskDWord) >> 22) & 0x3FF;
++
++		X = result[final_candidate][4];
++		if ((X & 0x00000200) != 0)
++			X = X | 0xFFFFFC00;		
++		TX1_A = (X * Oldval_1) >> 8;
++		//RTPRINT(FINIT, INIT_IQK, ("X = 0x%lx, TX1_A = 0x%lx\n", X, TX1_A));
++		PHY_SetBBReg(pAdapter, rOFDM0_XBTxIQImbalance, 0x3FF, TX1_A);
++		PHY_SetBBReg(pAdapter, rOFDM0_ECCAThreshold, BIT(27), ((X* Oldval_1>>7) & 0x1));
++
++		Y = result[final_candidate][5];
++		if ((Y & 0x00000200) != 0)
++			Y = Y | 0xFFFFFC00;		
++		TX1_C = (Y * Oldval_1) >> 8;
++		//RTPRINT(FINIT, INIT_IQK, ("Y = 0x%lx, TX1_C = 0x%lx\n", Y, TX1_C));
++		PHY_SetBBReg(pAdapter, rOFDM0_XDTxAFE, 0xF0000000, ((TX1_C&0x3C0)>>6));
++		PHY_SetBBReg(pAdapter, rOFDM0_XBTxIQImbalance, 0x003F0000, (TX1_C&0x3F));
++		PHY_SetBBReg(pAdapter, rOFDM0_ECCAThreshold, BIT(25), ((Y* Oldval_1>>7) & 0x1));
++
++		if(bTxOnly)
++			return;
++
++		reg = result[final_candidate][6];
++		PHY_SetBBReg(pAdapter, rOFDM0_XBRxIQImbalance, 0x3FF, reg);
++
++		reg = result[final_candidate][7] & 0x3F;
++		PHY_SetBBReg(pAdapter, rOFDM0_XBRxIQImbalance, 0xFC00, reg);
++
++		reg = (result[final_candidate][7] >> 6) & 0xF;
++		PHY_SetBBReg(pAdapter, rOFDM0_AGCRSSITable, 0x0000F000, reg);
++	}
++}
++
++static VOID
++_PHY_SaveADDARegisters(
++	IN	PADAPTER	pAdapter,
++	IN	u32*		ADDAReg,
++	IN	u32*		ADDABackup,
++	IN	u32			RegisterNum
++	)
++{
++	u32	i;
++	
++	//RTPRINT(FINIT, INIT_IQK, ("Save ADDA parameters.\n"));
++	for( i = 0 ; i < RegisterNum ; i++){
++		ADDABackup[i] = PHY_QueryBBReg(pAdapter, ADDAReg[i], bMaskDWord);
++	}
++}
++
++static VOID
++_PHY_SaveMACRegisters(
++	IN	PADAPTER	pAdapter,
++	IN	u32*		MACReg,
++	IN	u32*		MACBackup
++	)
++{
++	u32	i;
++	
++	//RTPRINT(FINIT, INIT_IQK, ("Save MAC parameters.\n"));
++	for( i = 0 ; i < (IQK_MAC_REG_NUM - 1); i++){
++		MACBackup[i] =rtw_read8(pAdapter, MACReg[i]);		
++	}
++	MACBackup[i] = rtw_read32(pAdapter, MACReg[i]);		
++
++}
++
++static VOID
++_PHY_ReloadADDARegisters(
++	IN	PADAPTER	pAdapter,
++	IN	u32*		ADDAReg,
++	IN	u32*		ADDABackup,
++	IN	u32			RegiesterNum
++	)
++{
++	u32	i;
++
++	//RTPRINT(FINIT, INIT_IQK, ("Reload ADDA power saving parameters !\n"));
++	for(i = 0 ; i < RegiesterNum ; i++){
++		PHY_SetBBReg(pAdapter, ADDAReg[i], bMaskDWord, ADDABackup[i]);
++	}
++}
++
++static VOID
++_PHY_ReloadMACRegisters(
++	IN	PADAPTER	pAdapter,
++	IN	u32*		MACReg,
++	IN	u32*		MACBackup
++	)
++{
++	u32	i;
++
++	//RTPRINT(FINIT, INIT_IQK, ("Reload MAC parameters !\n"));
++	for(i = 0 ; i < (IQK_MAC_REG_NUM - 1); i++){
++		rtw_write8(pAdapter, MACReg[i], (u8)MACBackup[i]);
++	}
++	rtw_write32(pAdapter, MACReg[i], MACBackup[i]);	
++}
++
++static VOID
++_PHY_PathADDAOn(
++	IN	PADAPTER	pAdapter,
++	IN	u32*		ADDAReg,
++	IN	BOOLEAN		isPathAOn,
++	IN	BOOLEAN		is2T
++	)
++{
++	u32	pathOn;
++	u32	i;
++
++	//RTPRINT(FINIT, INIT_IQK, ("ADDA ON.\n"));
++
++	pathOn = isPathAOn ? 0x04db25a4 : 0x0b1b25a4;
++	if(_FALSE == is2T){
++		pathOn = 0x0bdb25a0;
++		PHY_SetBBReg(pAdapter, ADDAReg[0], bMaskDWord, 0x0b1b25a0);
++	}
++	else{
++		PHY_SetBBReg(pAdapter, ADDAReg[0], bMaskDWord, pathOn);
++	}
++	
++	for( i = 1 ; i < IQK_ADDA_REG_NUM ; i++){
++		PHY_SetBBReg(pAdapter, ADDAReg[i], bMaskDWord, pathOn);
++	}
++	
++}
++
++static VOID
++_PHY_MACSettingCalibration(
++	IN	PADAPTER	pAdapter,
++	IN	u32*		MACReg,
++	IN	u32*		MACBackup	
++	)
++{
++	u32	i = 0;
++
++	//RTPRINT(FINIT, INIT_IQK, ("MAC settings for Calibration.\n"));
++
++	rtw_write8(pAdapter, MACReg[i], 0x3F);
++
++	for(i = 1 ; i < (IQK_MAC_REG_NUM - 1); i++){
++		rtw_write8(pAdapter, MACReg[i], (u8)(MACBackup[i]&(~BIT3)));
++	}
++	rtw_write8(pAdapter, MACReg[i], (u8)(MACBackup[i]&(~BIT5)));	
++
++}
++
++static VOID
++_PHY_PathAStandBy(
++	IN	PADAPTER	pAdapter
++	)
++{
++	//RTPRINT(FINIT, INIT_IQK, ("Path-A standby mode!\n"));
++
++	PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0x0);
++	PHY_SetBBReg(pAdapter, 0x840, bMaskDWord, 0x00010000);
++	PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0x80800000);
++}
++
++static VOID
++_PHY_PIModeSwitch(
++	IN	PADAPTER	pAdapter,
++	IN	BOOLEAN		PIMode
++	)
++{
++	u32	mode;
++
++	//RTPRINT(FINIT, INIT_IQK, ("BB Switch to %s mode!\n", (PIMode ? "PI" : "SI")));
++
++	mode = PIMode ? 0x01000100 : 0x01000000;
++	PHY_SetBBReg(pAdapter, 0x820, bMaskDWord, mode);
++	PHY_SetBBReg(pAdapter, 0x828, bMaskDWord, mode);
++}
++
++/*
++return _FALSE => do IQK again
++*/
++static BOOLEAN							
++_PHY_SimularityCompare(
++	IN	PADAPTER	pAdapter,
++	IN	int 		result[][8],
++	IN	u8		 c1,
++	IN	u8		 c2
++	)
++{
++	u32		i, j, diff, SimularityBitMap, bound = 0;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);	
++	u8		final_candidate[2] = {0xFF, 0xFF};	//for path A and path B
++	BOOLEAN		bResult = _TRUE, is2T = IS_92C_SERIAL( pHalData->VersionID);
++	
++	if(is2T)
++		bound = 8;
++	else
++		bound = 4;
++
++	SimularityBitMap = 0;
++	
++	for( i = 0; i < bound; i++ )
++	{
++		diff = (result[c1][i] > result[c2][i]) ? (result[c1][i] - result[c2][i]) : (result[c2][i] - result[c1][i]);
++		if (diff > MAX_TOLERANCE)
++		{
++			if((i == 2 || i == 6) && !SimularityBitMap)
++			{
++				if(result[c1][i]+result[c1][i+1] == 0)
++					final_candidate[(i/4)] = c2;
++				else if (result[c2][i]+result[c2][i+1] == 0)
++					final_candidate[(i/4)] = c1;
++				else
++					SimularityBitMap = SimularityBitMap|(1<<i);
++			}
++			else
++				SimularityBitMap = SimularityBitMap|(1<<i);
++		}
++	}
++	
++	if ( SimularityBitMap == 0)
++	{
++		for( i = 0; i < (bound/4); i++ )
++		{
++			if(final_candidate[i] != 0xFF)
++			{
++				for( j = i*4; j < (i+1)*4-2; j++)
++					result[3][j] = result[final_candidate[i]][j];
++				bResult = _FALSE;
++			}
++		}
++		return bResult;
++	}
++	else if (!(SimularityBitMap & 0x0F))			//path A OK
++	{
++		for(i = 0; i < 4; i++)
++			result[3][i] = result[c1][i];
++		return _FALSE;
++	}
++	else if (!(SimularityBitMap & 0xF0) && is2T)	//path B OK
++	{
++		for(i = 4; i < 8; i++)
++			result[3][i] = result[c1][i];
++		return _FALSE;
++	}	
++	else		
++		return _FALSE;
++	
++}
++
++static VOID	
++_PHY_IQCalibrate(
++	IN	PADAPTER	pAdapter,
++	IN	int 		result[][8],
++	IN	u8		t,
++	IN	BOOLEAN		is2T
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	u32			i;
++	u8			PathAOK, PathBOK;
++	u32			ADDA_REG[IQK_ADDA_REG_NUM] = {	
++						rFPGA0_XCD_SwitchControl, 	rBlue_Tooth, 	
++						rRx_Wait_CCA, 		rTx_CCK_RFON,
++						rTx_CCK_BBON, 	rTx_OFDM_RFON, 	
++						rTx_OFDM_BBON, 	rTx_To_Rx,
++						rTx_To_Tx, 		rRx_CCK, 	
++						rRx_OFDM, 		rRx_Wait_RIFS,
++						rRx_TO_Rx, 		rStandby, 	
++						rSleep, 			rPMPD_ANAEN };
++
++	u32			IQK_MAC_REG[IQK_MAC_REG_NUM] = {
++						REG_TXPAUSE, 		REG_BCN_CTRL,	
++						REG_BCN_CTRL_1,	REG_GPIO_MUXCFG};
++
++	u32			IQK_BB_REG_92C[IQK_BB_REG_NUM] = {
++							rOFDM0_TRxPathEnable, 		rOFDM0_TRMuxPar,	
++							rFPGA0_XCD_RFInterfaceSW,	rConfig_AntA,	rConfig_AntB,
++							rFPGA0_XAB_RFInterfaceSW,	rFPGA0_XA_RFInterfaceOE,	
++							rFPGA0_XB_RFInterfaceOE,	rFPGA0_RFMOD	
++							};
++
++#if MP_DRIVER
++	const u32	retryCount = 9;
++#else
++	const u32	retryCount = 2;
++#endif
++
++	// Note: IQ calibration must be performed after loading 
++	// 		PHY_REG.txt , and radio_a, radio_b.txt	
++	
++	u32 bbvalue;
++
++	if(t==0)
++	{
++	 	bbvalue = PHY_QueryBBReg(pAdapter, rFPGA0_RFMOD, bMaskDWord);
++		//RTPRINT(FINIT, INIT_IQK, ("PHY_IQCalibrate()==>0x%08lx\n",bbvalue));
++
++		//RTPRINT(FINIT, INIT_IQK, ("IQ Calibration for %s\n", (is2T ? "2T2R" : "1T1R")));
++	
++	 	// Save ADDA parameters, turn Path A ADDA on
++	 	_PHY_SaveADDARegisters(pAdapter, ADDA_REG, pdmpriv->ADDA_backup,IQK_ADDA_REG_NUM);
++		_PHY_SaveMACRegisters(pAdapter, IQK_MAC_REG, pdmpriv->IQK_MAC_backup);
++		_PHY_SaveADDARegisters(pAdapter, IQK_BB_REG_92C, pdmpriv->IQK_BB_backup, IQK_BB_REG_NUM);
++	}
++ 	_PHY_PathADDAOn(pAdapter, ADDA_REG, _TRUE, is2T);
++
++	if(t==0)
++	{
++		pdmpriv->bRfPiEnable = (u8)PHY_QueryBBReg(pAdapter, rFPGA0_XA_HSSIParameter1, BIT(8));
++	}
++
++	if(!pdmpriv->bRfPiEnable){
++		// Switch BB to PI mode to do IQ Calibration.
++		_PHY_PIModeSwitch(pAdapter, _TRUE);
++	}
++
++	PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, BIT24, 0x00);
++	PHY_SetBBReg(pAdapter, rOFDM0_TRxPathEnable, bMaskDWord, 0x03a05600);
++	PHY_SetBBReg(pAdapter, rOFDM0_TRMuxPar, bMaskDWord, 0x000800e4);
++	PHY_SetBBReg(pAdapter, rFPGA0_XCD_RFInterfaceSW, bMaskDWord, 0x22204000);
++	PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 0x01);
++	PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 0x01);
++	PHY_SetBBReg(pAdapter, rFPGA0_XA_RFInterfaceOE, BIT10, 0x00);
++	PHY_SetBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT10, 0x00);
++
++	if(is2T)
++	{
++		PHY_SetBBReg(pAdapter, rFPGA0_XA_LSSIParameter, bMaskDWord, 0x00010000);
++		PHY_SetBBReg(pAdapter, rFPGA0_XB_LSSIParameter, bMaskDWord, 0x00010000);
++	}
++	
++	//MAC settings
++	_PHY_MACSettingCalibration(pAdapter, IQK_MAC_REG, pdmpriv->IQK_MAC_backup);
++
++	//Page B init
++	PHY_SetBBReg(pAdapter, rConfig_AntA, bMaskDWord, 0x00080000);
++	
++	if(is2T)
++	{
++		PHY_SetBBReg(pAdapter, rConfig_AntB, bMaskDWord, 0x00080000);
++	}
++	
++	// IQ calibration setting
++	//RTPRINT(FINIT, INIT_IQK, ("IQK setting!\n"));		
++	PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0x80800000);
++	PHY_SetBBReg(pAdapter, rTx_IQK, bMaskDWord, 0x01007c00);
++	PHY_SetBBReg(pAdapter, rRx_IQK, bMaskDWord, 0x01004800);
++
++	for(i = 0 ; i < retryCount ; i++){
++		PathAOK = _PHY_PathA_IQK(pAdapter, is2T);
++		if(PathAOK == 0x03){
++				DBG_8192C("Path A IQK Success!!\n");
++				result[t][0] = (PHY_QueryBBReg(pAdapter, rTx_Power_Before_IQK_A, bMaskDWord)&0x3FF0000)>>16;
++				result[t][1] = (PHY_QueryBBReg(pAdapter, rTx_Power_After_IQK_A, bMaskDWord)&0x3FF0000)>>16;
++				result[t][2] = (PHY_QueryBBReg(pAdapter, rRx_Power_Before_IQK_A_2, bMaskDWord)&0x3FF0000)>>16;
++				result[t][3] = (PHY_QueryBBReg(pAdapter, rRx_Power_After_IQK_A_2, bMaskDWord)&0x3FF0000)>>16;
++			break;
++		}
++		else if (i == (retryCount-1) && PathAOK == 0x01)	//Tx IQK OK
++		{
++			DBG_8192C("Path A IQK Only  Tx Success!!\n");
++			
++			result[t][0] = (PHY_QueryBBReg(pAdapter, rTx_Power_Before_IQK_A, bMaskDWord)&0x3FF0000)>>16;
++			result[t][1] = (PHY_QueryBBReg(pAdapter, rTx_Power_After_IQK_A, bMaskDWord)&0x3FF0000)>>16;			
++		}
++	}
++
++	if(0x00 == PathAOK){		
++		DBG_8192C("Path A IQK failed!!\n");
++	}
++
++	if(is2T){
++		_PHY_PathAStandBy(pAdapter);
++
++		// Turn Path B ADDA on
++		_PHY_PathADDAOn(pAdapter, ADDA_REG, _FALSE, is2T);
++
++		for(i = 0 ; i < retryCount ; i++){
++			PathBOK = _PHY_PathB_IQK(pAdapter);
++			if(PathBOK == 0x03){
++				DBG_8192C("Path B IQK Success!!\n");
++				result[t][4] = (PHY_QueryBBReg(pAdapter, rTx_Power_Before_IQK_B, bMaskDWord)&0x3FF0000)>>16;
++				result[t][5] = (PHY_QueryBBReg(pAdapter, rTx_Power_After_IQK_B, bMaskDWord)&0x3FF0000)>>16;
++				result[t][6] = (PHY_QueryBBReg(pAdapter, rRx_Power_Before_IQK_B_2, bMaskDWord)&0x3FF0000)>>16;
++				result[t][7] = (PHY_QueryBBReg(pAdapter, rRx_Power_After_IQK_B_2, bMaskDWord)&0x3FF0000)>>16;
++				break;
++			}
++			else if (i == (retryCount - 1) && PathBOK == 0x01)	//Tx IQK OK
++			{
++				DBG_8192C("Path B Only Tx IQK Success!!\n");
++				result[t][4] = (PHY_QueryBBReg(pAdapter, rTx_Power_Before_IQK_B, bMaskDWord)&0x3FF0000)>>16;
++				result[t][5] = (PHY_QueryBBReg(pAdapter, rTx_Power_After_IQK_B, bMaskDWord)&0x3FF0000)>>16;
++			}
++		}
++
++		if(0x00 == PathBOK){		
++			DBG_8192C("Path B IQK failed!!\n");
++		}
++	}
++
++	//Back to BB mode, load original value
++	//RTPRINT(FINIT, INIT_IQK, ("IQK:Back to BB mode, load original value!\n"));
++	PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0);
++
++	if(t!=0)
++	{
++		if(!pdmpriv->bRfPiEnable){
++			// Switch back BB to SI mode after finish IQ Calibration.
++			_PHY_PIModeSwitch(pAdapter, _FALSE);
++		}
++
++		// Reload ADDA power saving parameters
++	 	_PHY_ReloadADDARegisters(pAdapter, ADDA_REG, pdmpriv->ADDA_backup, IQK_ADDA_REG_NUM);
++
++		// Reload MAC parameters
++		_PHY_ReloadMACRegisters(pAdapter, IQK_MAC_REG, pdmpriv->IQK_MAC_backup);
++
++	 	// Reload BB parameters
++	 	_PHY_ReloadADDARegisters(pAdapter, IQK_BB_REG_92C, pdmpriv->IQK_BB_backup, IQK_BB_REG_NUM);
++
++		// Restore RX initial gain
++		PHY_SetBBReg(pAdapter, rFPGA0_XA_LSSIParameter, bMaskDWord, 0x00032ed3);
++		if(is2T){
++			PHY_SetBBReg(pAdapter, rFPGA0_XB_LSSIParameter, bMaskDWord, 0x00032ed3);
++		}
++
++		//load 0xe30 IQC default value
++		PHY_SetBBReg(pAdapter, rTx_IQK_Tone_A, bMaskDWord, 0x01008c00);
++		PHY_SetBBReg(pAdapter, rRx_IQK_Tone_A, bMaskDWord, 0x01008c00);
++
++	}
++	//RTPRINT(FINIT, INIT_IQK, ("_PHY_IQCalibrate() <==\n"));
++
++}
++
++
++static VOID	
++_PHY_LCCalibrate(
++	IN	PADAPTER	pAdapter,
++	IN	BOOLEAN		is2T
++	)
++{
++	u8	tmpReg;
++	u32 	RF_Amode = 0, RF_Bmode = 0, LC_Cal;
++
++	//Check continuous TX and Packet TX
++	tmpReg = rtw_read8(pAdapter, 0xd03);
++
++	if((tmpReg&0x70) != 0)			//Deal with contisuous TX case
++		rtw_write8(pAdapter, 0xd03, tmpReg&0x8F);	//disable all continuous TX
++	else 							// Deal with Packet TX case
++		rtw_write8(pAdapter, REG_TXPAUSE, 0xFF);			// block all queues
++
++	if((tmpReg&0x70) != 0)
++	{
++		//1. Read original RF mode
++		//Path-A
++		RF_Amode = PHY_QueryRFReg(pAdapter, RF_PATH_A, RF_AC, bMask12Bits);
++
++		//Path-B
++		if(is2T)
++			RF_Bmode = PHY_QueryRFReg(pAdapter, RF_PATH_B, RF_AC, bMask12Bits);	
++
++		//2. Set RF mode = standby mode
++		//Path-A
++		PHY_SetRFReg(pAdapter, RF_PATH_A, RF_AC, bMask12Bits, (RF_Amode&0x8FFFF)|0x10000);
++
++		//Path-B
++		if(is2T)
++			PHY_SetRFReg(pAdapter, RF_PATH_B, RF_AC, bMask12Bits, (RF_Bmode&0x8FFFF)|0x10000);
++	}
++	
++	//3. Read RF reg18
++	LC_Cal = PHY_QueryRFReg(pAdapter, RF_PATH_A, RF_CHNLBW, bMask12Bits);
++	
++	//4. Set LC calibration begin
++	PHY_SetRFReg(pAdapter, RF_PATH_A, RF_CHNLBW, bMask12Bits, LC_Cal|0x08000);
++
++	#ifdef CONFIG_LONG_DELAY_ISSUE
++	rtw_msleep_os(100);	
++	#else
++	rtw_mdelay_os(100);		
++	#endif
++
++	//Restore original situation
++	if((tmpReg&0x70) != 0)	//Deal with contisuous TX case 
++	{  
++		//Path-A
++		rtw_write8(pAdapter, 0xd03, tmpReg);
++		PHY_SetRFReg(pAdapter, RF_PATH_A, RF_AC, bMask12Bits, RF_Amode);
++		
++		//Path-B
++		if(is2T)
++			PHY_SetRFReg(pAdapter, RF_PATH_B, RF_AC, bMask12Bits, RF_Bmode);
++	}
++	else // Deal with Packet TX case
++	{
++		rtw_write8(pAdapter, REG_TXPAUSE, 0x00);	
++	}
++	
++}
++
++
++//Analog Pre-distortion calibration
++#define		APK_BB_REG_NUM	8
++#define		APK_CURVE_REG_NUM 4
++#define		PATH_NUM		2
++
++static VOID	
++_PHY_APCalibrate(
++	IN	PADAPTER	pAdapter,
++	IN	char 		delta,
++	IN	BOOLEAN		is2T
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++
++	u32 			regD[PATH_NUM];
++	u32			tmpReg, index, offset, i, apkbound;
++	u8			path, pathbound = PATH_NUM;
++	u32			BB_backup[APK_BB_REG_NUM];
++	u32			BB_REG[APK_BB_REG_NUM] = {	
++						rFPGA1_TxBlock, 	rOFDM0_TRxPathEnable, 
++						rFPGA0_RFMOD, 	rOFDM0_TRMuxPar, 
++						rFPGA0_XCD_RFInterfaceSW,	rFPGA0_XAB_RFInterfaceSW, 
++						rFPGA0_XA_RFInterfaceOE, 	rFPGA0_XB_RFInterfaceOE	};
++	u32			BB_AP_MODE[APK_BB_REG_NUM] = {	
++						0x00000020, 0x00a05430, 0x02040000, 
++						0x000800e4, 0x00204000 };
++	u32			BB_normal_AP_MODE[APK_BB_REG_NUM] = {	
++						0x00000020, 0x00a05430, 0x02040000, 
++						0x000800e4, 0x22204000 };						
++
++	u32			AFE_backup[IQK_ADDA_REG_NUM];
++	u32			AFE_REG[IQK_ADDA_REG_NUM] = {	
++						rFPGA0_XCD_SwitchControl, 	rBlue_Tooth, 	
++						rRx_Wait_CCA, 		rTx_CCK_RFON,
++						rTx_CCK_BBON, 	rTx_OFDM_RFON, 	
++						rTx_OFDM_BBON, 	rTx_To_Rx,
++						rTx_To_Tx, 		rRx_CCK, 	
++						rRx_OFDM, 		rRx_Wait_RIFS,
++						rRx_TO_Rx, 		rStandby, 	
++						rSleep, 			rPMPD_ANAEN };
++
++	u32			MAC_backup[IQK_MAC_REG_NUM];
++	u32			MAC_REG[IQK_MAC_REG_NUM] = {
++						REG_TXPAUSE, 		REG_BCN_CTRL,	
++						REG_BCN_CTRL_1,	REG_GPIO_MUXCFG};
++
++	u32			APK_RF_init_value[PATH_NUM][APK_BB_REG_NUM] = {
++					{0x0852c, 0x1852c, 0x5852c, 0x1852c, 0x5852c},
++					{0x2852e, 0x0852e, 0x3852e, 0x0852e, 0x0852e}
++					};	
++
++	u32			APK_normal_RF_init_value[PATH_NUM][APK_BB_REG_NUM] = {
++					{0x0852c, 0x0a52c, 0x3a52c, 0x5a52c, 0x5a52c},	//path settings equal to path b settings
++					{0x0852c, 0x0a52c, 0x5a52c, 0x5a52c, 0x5a52c}
++					};
++	
++	u32			APK_RF_value_0[PATH_NUM][APK_BB_REG_NUM] = {
++					{0x52019, 0x52014, 0x52013, 0x5200f, 0x5208d},
++					{0x5201a, 0x52019, 0x52016, 0x52033, 0x52050}
++					};
++
++	u32			APK_normal_RF_value_0[PATH_NUM][APK_BB_REG_NUM] = {
++					{0x52019, 0x52017, 0x52010, 0x5200d, 0x5206a},	//path settings equal to path b settings
++					{0x52019, 0x52017, 0x52010, 0x5200d, 0x5206a}
++					};
++#if 0
++	u32			APK_RF_value_A[PATH_NUM][APK_BB_REG_NUM] = {
++					{0x1adb0, 0x1adb0, 0x1ada0, 0x1ad90, 0x1ad80},		
++					{0x00fb0, 0x00fb0, 0x00fa0, 0x00f90, 0x00f80}						
++					};
++#endif
++	u32			AFE_on_off[PATH_NUM] = {
++					0x04db25a4, 0x0b1b25a4};	//path A on path B off / path A off path B on
++
++	u32			APK_offset[PATH_NUM] = {
++					rConfig_AntA, rConfig_AntB};
++
++	u32			APK_normal_offset[PATH_NUM] = {
++					rConfig_Pmpd_AntA, rConfig_Pmpd_AntB};
++					
++	u32			APK_value[PATH_NUM] = {
++					0x92fc0000, 0x12fc0000};					
++
++	u32			APK_normal_value[PATH_NUM] = {
++					0x92680000, 0x12680000};					
++
++	char			APK_delta_mapping[APK_BB_REG_NUM][13] = {
++					{-4, -3, -2, -2, -1, -1, 0, 1, 2, 3, 4, 5, 6},
++					{-4, -3, -2, -2, -1, -1, 0, 1, 2, 3, 4, 5, 6},
++					{-6, -4, -2, -2, -1, -1, 0, 1, 2, 3, 4, 5, 6},
++					{-1, -1, -1, -1, -1, -1, 0, 1, 2, 3, 4, 5, 6},
++					{-11, -9, -7, -5, -3, -1, 0, 0, 0, 0, 0, 0, 0}
++					};
++	
++	u32			APK_normal_setting_value_1[13] = {
++					0x01017018, 0xf7ed8f84, 0x1b1a1816, 0x2522201e, 0x322e2b28,
++					0x433f3a36, 0x5b544e49, 0x7b726a62, 0xa69a8f84, 0xdfcfc0b3,
++					0x12680000, 0x00880000, 0x00880000
++					};
++
++	u32			APK_normal_setting_value_2[16] = {
++					0x01c7021d, 0x01670183, 0x01000123, 0x00bf00e2, 0x008d00a3,
++					0x0068007b, 0x004d0059, 0x003a0042, 0x002b0031, 0x001f0025,
++					0x0017001b, 0x00110014, 0x000c000f, 0x0009000b, 0x00070008,
++					0x00050006
++					};
++	
++	u32			APK_result[PATH_NUM][APK_BB_REG_NUM];	//val_1_1a, val_1_2a, val_2a, val_3a, val_4a
++	//u32			AP_curve[PATH_NUM][APK_CURVE_REG_NUM];
++
++	int			BB_offset, delta_V, delta_offset;
++
++#if (MP_DRIVER == 1)
++	PMPT_CONTEXT	pMptCtx = &pAdapter->mppriv.MptCtx;
++
++	pMptCtx->APK_bound[0] = 45;
++	pMptCtx->APK_bound[1] = 52;
++#endif
++
++	//RTPRINT(FINIT, INIT_IQK, ("==>PHY_APCalibrate() delta %d\n", delta));
++	
++	//RTPRINT(FINIT, INIT_IQK, ("AP Calibration for %s %s\n", (is2T ? "2T2R" : "1T1R"), (isNormal ? "Normal chip" : "Test chip")));
++
++	if(!is2T)
++		pathbound = 1;
++
++	//2 FOR NORMAL CHIP SETTINGS
++
++// Temporarily do not allow normal driver to do the following settings because these offset
++// and value will cause RF internal PA to be unpredictably disabled by HW, such that RF Tx signal
++// will disappear after disable/enable card many times on 88CU. RF SD and DD have not find the
++// root cause, so we remove these actions temporarily. Added by tynli and SD3 Allen. 2010.05.31.
++#if (MP_DRIVER != 1)
++	return;
++#endif
++
++	//settings adjust for normal chip
++	for(index = 0; index < PATH_NUM; index ++)
++	{
++		APK_offset[index] = APK_normal_offset[index];
++		APK_value[index] = APK_normal_value[index];
++		AFE_on_off[index] = 0x6fdb25a4;
++	}
++
++	for(index = 0; index < APK_BB_REG_NUM; index ++)
++	{
++		for(path = 0; path < pathbound; path++)
++		{
++			APK_RF_init_value[path][index] = APK_normal_RF_init_value[path][index];
++			APK_RF_value_0[path][index] = APK_normal_RF_value_0[path][index];
++		}
++		BB_AP_MODE[index] = BB_normal_AP_MODE[index];
++	}
++
++	apkbound = 6;
++
++	//save BB default value	
++	for(index = 0; index < APK_BB_REG_NUM ; index++)
++	{
++		if(index == 0)		//skip 
++			continue;				
++		BB_backup[index] = PHY_QueryBBReg(pAdapter, BB_REG[index], bMaskDWord);
++	}
++
++	//save MAC default value													
++	_PHY_SaveMACRegisters(pAdapter, MAC_REG, MAC_backup);
++
++	//save AFE default value
++	_PHY_SaveADDARegisters(pAdapter, AFE_REG, AFE_backup, IQK_ADDA_REG_NUM);
++
++	for(path = 0; path < pathbound; path++)
++	{
++		if(path == RF_PATH_A)
++		{
++			//path A APK
++			//load APK setting
++			//path-A		
++			offset = rPdp_AntA;
++			for(index = 0; index < 11; index ++)			
++			{
++				PHY_SetBBReg(pAdapter, offset, bMaskDWord, APK_normal_setting_value_1[index]);
++				//RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x%x value 0x%x\n", offset, PHY_QueryBBReg(pAdapter, offset, bMaskDWord))); 	
++				
++				offset += 0x04;
++			}
++			
++			PHY_SetBBReg(pAdapter, rConfig_Pmpd_AntB, bMaskDWord, 0x12680000);
++			
++			offset = rConfig_AntA;
++			for(; index < 13; index ++) 		
++			{
++				PHY_SetBBReg(pAdapter, offset, bMaskDWord, APK_normal_setting_value_1[index]);
++				//RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x%x value 0x%x\n", offset, PHY_QueryBBReg(pAdapter, offset, bMaskDWord))); 	
++				
++				offset += 0x04;
++			}	
++			
++			//page-B1
++			PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0x40000000);
++			
++			//path A
++			offset = rPdp_AntA;
++			for(index = 0; index < 16; index++)
++			{
++				PHY_SetBBReg(pAdapter, offset, bMaskDWord, APK_normal_setting_value_2[index]);		
++				//RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x%x value 0x%x\n", offset, PHY_QueryBBReg(pAdapter, offset, bMaskDWord))); 	
++				
++				offset += 0x04;
++			}				
++			PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0x00000000);							
++		}
++		else if(path == RF_PATH_B)
++		{
++			//path B APK
++			//load APK setting
++			//path-B		
++			offset = rPdp_AntB;
++			for(index = 0; index < 10; index ++)			
++			{
++				PHY_SetBBReg(pAdapter, offset, bMaskDWord, APK_normal_setting_value_1[index]);
++				//RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x%x value 0x%x\n", offset, PHY_QueryBBReg(pAdapter, offset, bMaskDWord))); 	
++				
++				offset += 0x04;
++			}
++			PHY_SetBBReg(pAdapter, rConfig_Pmpd_AntA, bMaskDWord, 0x12680000);
++			
++			PHY_SetBBReg(pAdapter, rConfig_Pmpd_AntB, bMaskDWord, 0x12680000);
++			
++			offset = rConfig_AntA;
++			index = 11;
++			for(; index < 13; index ++) //offset 0xb68, 0xb6c		
++			{
++				PHY_SetBBReg(pAdapter, offset, bMaskDWord, APK_normal_setting_value_1[index]);
++				//RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x%x value 0x%x\n", offset, PHY_QueryBBReg(pAdapter, offset, bMaskDWord))); 	
++				
++				offset += 0x04;
++			}	
++			
++			//page-B1
++			PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0x40000000);
++			
++			//path B
++			offset = 0xb60;
++			for(index = 0; index < 16; index++)
++			{
++				PHY_SetBBReg(pAdapter, offset, bMaskDWord, APK_normal_setting_value_2[index]);		
++				//RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x%x value 0x%x\n", offset, PHY_QueryBBReg(pAdapter, offset, bMaskDWord))); 	
++				
++				offset += 0x04;
++			}				
++			PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0x00000000);							
++		}		
++
++		//save RF default value
++		regD[path] = PHY_QueryRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_TXBIAS_A, bRFRegOffsetMask);
++		
++		//Path A AFE all on, path B AFE All off or vise versa
++		for(index = 0; index < IQK_ADDA_REG_NUM ; index++)
++			PHY_SetBBReg(pAdapter, AFE_REG[index], bMaskDWord, AFE_on_off[path]);
++		//RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0xe70 %x\n", PHY_QueryBBReg(pAdapter, 0xe70, bMaskDWord)));		
++
++		//BB to AP mode
++		if(path == 0)
++		{
++			for(index = 0; index < APK_BB_REG_NUM ; index++)
++			{
++				if(index == 0)		//skip 
++					continue;
++				else if (index < 5)
++					PHY_SetBBReg(pAdapter, BB_REG[index], bMaskDWord, BB_AP_MODE[index]);
++				else if (BB_REG[index] == 0x870)
++					PHY_SetBBReg(pAdapter, BB_REG[index], bMaskDWord, BB_backup[index]|BIT10|BIT26);
++				else
++					PHY_SetBBReg(pAdapter, BB_REG[index], BIT10, 0x0);
++			}
++			PHY_SetBBReg(pAdapter, rTx_IQK_Tone_A, bMaskDWord, 0x01008c00);
++			PHY_SetBBReg(pAdapter, rRx_IQK_Tone_A, bMaskDWord, 0x01008c00);
++		}
++		else		//path B
++		{
++			PHY_SetBBReg(pAdapter, rTx_IQK_Tone_B, bMaskDWord, 0x01008c00);
++			PHY_SetBBReg(pAdapter, rRx_IQK_Tone_B, bMaskDWord, 0x01008c00);
++		}
++
++		//RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x800 %x\n", PHY_QueryBBReg(pAdapter, 0x800, bMaskDWord)));				
++
++		//MAC settings
++		_PHY_MACSettingCalibration(pAdapter, MAC_REG, MAC_backup);
++
++		if(path == RF_PATH_A)	//Path B to standby mode
++		{
++			PHY_SetRFReg(pAdapter, RF_PATH_B, RF_AC, bRFRegOffsetMask, 0x10000);			
++		}
++		else			//Path A to standby mode
++		{
++			PHY_SetRFReg(pAdapter, RF_PATH_A, RF_AC, bRFRegOffsetMask, 0x10000);			
++			PHY_SetRFReg(pAdapter, RF_PATH_A, RF_MODE1, bRFRegOffsetMask, 0x1000f);			
++			PHY_SetRFReg(pAdapter, RF_PATH_A, RF_MODE2, bRFRegOffsetMask, 0x20103);						
++		}
++
++		delta_offset = ((delta+14)/2);
++		if(delta_offset < 0)
++			delta_offset = 0;
++		else if (delta_offset > 12)
++			delta_offset = 12;
++			
++		//AP calibration
++		for(index = 0; index < APK_BB_REG_NUM; index++)
++		{
++			if(index != 1)		//only DO PA11+PAD01001, AP RF setting
++				continue;
++					
++			tmpReg = APK_RF_init_value[path][index];
++#if 1			
++			if(!pdmpriv->bAPKThermalMeterIgnore)
++			{
++				BB_offset = (tmpReg & 0xF0000) >> 16;
++
++				if(!(tmpReg & BIT15)) //sign bit 0
++				{
++					BB_offset = -BB_offset;
++				}
++
++				delta_V = APK_delta_mapping[index][delta_offset];
++				
++				BB_offset += delta_V;
++
++				//RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() APK num %d delta_V %d delta_offset %d\n", index, delta_V, delta_offset));		
++				
++				if(BB_offset < 0)
++				{
++					tmpReg = tmpReg & (~BIT15);
++					BB_offset = -BB_offset;
++				}
++				else
++				{
++					tmpReg = tmpReg | BIT15;
++				}
++				tmpReg = (tmpReg & 0xFFF0FFFF) | (BB_offset << 16);
++			}
++#endif
++
++#ifdef CONFIG_PCI_HCI
++			if(IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID))
++				PHY_SetRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_IPA_A, bRFRegOffsetMask, 0x894ae);
++			else
++#endif
++				PHY_SetRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_IPA_A, bRFRegOffsetMask, 0x8992e);
++			//RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0xc %x\n", PHY_QueryRFReg(pAdapter, (RF_RADIO_PATH_E)path, 0xc, bMaskDWord)));
++			PHY_SetRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_AC, bRFRegOffsetMask, APK_RF_value_0[path][index]);
++			//RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x0 %x\n", PHY_QueryRFReg(pAdapter, (RF_RADIO_PATH_E)path, 0x0, bMaskDWord)));		
++			PHY_SetRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_TXBIAS_A, bRFRegOffsetMask, tmpReg);
++			//RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0xd %x\n", PHY_QueryRFReg(pAdapter, (RF_RADIO_PATH_E)path, 0xd, bMaskDWord)));
++
++			// PA11+PAD01111, one shot	
++			i = 0;
++			do
++			{
++				PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0x80000000);
++				{
++					PHY_SetBBReg(pAdapter, APK_offset[path], bMaskDWord, APK_value[0]);		
++					//RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x%x value 0x%x\n", APK_offset[path], PHY_QueryBBReg(pAdapter, APK_offset[path], bMaskDWord)));
++					rtw_mdelay_os(3);				
++					PHY_SetBBReg(pAdapter, APK_offset[path], bMaskDWord, APK_value[1]);
++					//RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0x%x value 0x%x\n", APK_offset[path], PHY_QueryBBReg(pAdapter, APK_offset[path], bMaskDWord)));
++					#ifdef CONFIG_LONG_DELAY_ISSUE
++					rtw_msleep_os(20);
++					#else
++					rtw_mdelay_os(20);
++					#endif
++				}
++				PHY_SetBBReg(pAdapter, rFPGA0_IQK, bMaskDWord, 0x00000000);
++				
++				if(path == RF_PATH_A)
++					tmpReg = PHY_QueryBBReg(pAdapter, rAPK, 0x03E00000);
++				else
++					tmpReg = PHY_QueryBBReg(pAdapter, rAPK, 0xF8000000);
++				//RTPRINT(FINIT, INIT_IQK, ("PHY_APCalibrate() offset 0xbd8[25:21] %x\n", tmpReg));
++
++				i++;
++			}
++			while(tmpReg > apkbound && i < 4);
++
++			APK_result[path][index] = tmpReg;
++		}
++	}
++
++	//reload MAC default value	
++	_PHY_ReloadMACRegisters(pAdapter, MAC_REG, MAC_backup);
++
++	//reload BB default value	
++	for(index = 0; index < APK_BB_REG_NUM ; index++)
++	{
++		if(index == 0)		//skip 
++			continue;
++		PHY_SetBBReg(pAdapter, BB_REG[index], bMaskDWord, BB_backup[index]);
++	}
++
++	//reload AFE default value
++	_PHY_ReloadADDARegisters(pAdapter, AFE_REG, AFE_backup, IQK_ADDA_REG_NUM);
++
++	//reload RF path default value
++	for(path = 0; path < pathbound; path++)
++	{
++		PHY_SetRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_TXBIAS_A, bRFRegOffsetMask, regD[path]);
++		if(path == RF_PATH_B)
++		{
++			PHY_SetRFReg(pAdapter, RF_PATH_A, RF_MODE1, bRFRegOffsetMask, 0x1000f);			
++			PHY_SetRFReg(pAdapter, RF_PATH_A, RF_MODE2, bRFRegOffsetMask, 0x20101);						
++		}
++
++		//note no index == 0
++		if (APK_result[path][1] > 6)
++			APK_result[path][1] = 6;
++		//RTPRINT(FINIT, INIT_IQK, ("apk path %d result %d 0x%x \t", path, 1, APK_result[path][1]));
++	}
++
++	//RTPRINT(FINIT, INIT_IQK, ("\n"));
++	
++
++	for(path = 0; path < pathbound; path++)
++	{
++		PHY_SetRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_BS_PA_APSET_G1_G4, bRFRegOffsetMask, 
++		((APK_result[path][1] << 15) | (APK_result[path][1] << 10) | (APK_result[path][1] << 5) | APK_result[path][1]));
++		if(path == RF_PATH_A)
++			PHY_SetRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_BS_PA_APSET_G5_G8, bRFRegOffsetMask, 
++			((APK_result[path][1] << 15) | (APK_result[path][1] << 10) | (0x00 << 5) | 0x05));
++		else
++			PHY_SetRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_BS_PA_APSET_G5_G8, bRFRegOffsetMask, 
++			((APK_result[path][1] << 15) | (APK_result[path][1] << 10) | (0x02 << 5) | 0x05));
++		PHY_SetRFReg(pAdapter, (RF_RADIO_PATH_E)path, RF_BS_PA_APSET_G9_G11, bRFRegOffsetMask, 
++		((0x08 << 15) | (0x08 << 10) | (0x08 << 5) | 0x08));
++	}
++
++	pdmpriv->bAPKdone = _TRUE;
++
++	//RTPRINT(FINIT, INIT_IQK, ("<==PHY_APCalibrate()\n"));
++}
++
++static VOID _PHY_SetRFPathSwitch(
++	IN	PADAPTER	pAdapter,
++	IN	BOOLEAN		bMain,
++	IN	BOOLEAN		is2T
++	)
++{
++	u8	u1bTmp;
++
++	if(!pAdapter->hw_init_completed)
++	{
++		u1bTmp = rtw_read8(pAdapter, REG_LEDCFG2) | BIT7;
++		rtw_write8(pAdapter, REG_LEDCFG2, u1bTmp);
++		//PHY_SetBBReg(pAdapter, REG_LEDCFG0, BIT23, 0x01);
++		PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT13, 0x01);
++	}
++
++	if(is2T)
++	{
++		if(bMain)
++			PHY_SetBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT5|BIT6, 0x1);	//92C_Path_A			
++		else
++			PHY_SetBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT5|BIT6, 0x2);	//BT							
++	}
++	else
++	{
++	
++		if(bMain)
++			PHY_SetBBReg(pAdapter, rFPGA0_XA_RFInterfaceOE, 0x300, 0x2);	//Main
++		else
++			PHY_SetBBReg(pAdapter, rFPGA0_XA_RFInterfaceOE, 0x300, 0x1);	//Aux		
++	}
++
++}
++
++//return value TRUE => Main; FALSE => Aux
++
++static BOOLEAN _PHY_QueryRFPathSwitch(
++	IN	PADAPTER	pAdapter,
++	IN	BOOLEAN		is2T
++	)
++{
++//	if(is2T)
++//		return _TRUE;
++	
++	if(!pAdapter->hw_init_completed)
++	{
++		PHY_SetBBReg(pAdapter, REG_LEDCFG0, BIT23, 0x01);
++		PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT13, 0x01);
++	}
++
++	if(is2T)
++	{
++		if(PHY_QueryBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT5|BIT6) == 0x01)
++			return _TRUE;
++		else
++			return _FALSE;
++	}
++	else
++	{
++		if(PHY_QueryBBReg(pAdapter, rFPGA0_XA_RFInterfaceOE, 0x300) == 0x02)
++			return _TRUE;
++		else
++			return _FALSE;
++	}
++}
++
++VOID
++rtl8192c_PHY_IQCalibrate(
++	IN	PADAPTER	pAdapter,
++	IN	BOOLEAN 	bReCovery
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	s32			result[4][8];	//last is final result
++	u8			i, final_candidate;
++	BOOLEAN		bPathAOK, bPathBOK;
++	s32			RegE94, RegE9C, RegEA4, RegEAC, RegEB4, RegEBC, RegEC4, RegECC, RegTmp = 0;
++	BOOLEAN		is12simular, is13simular, is23simular;	
++	BOOLEAN 	bStartContTx = _FALSE, bSingleTone = _FALSE, bCarrierSuppression = _FALSE;
++	u32			IQK_BB_REG_92C[IQK_BB_REG_NUM] = {
++					rOFDM0_XARxIQImbalance, 	rOFDM0_XBRxIQImbalance, 
++					rOFDM0_ECCAThreshold, 	rOFDM0_AGCRSSITable,
++					rOFDM0_XATxIQImbalance, 	rOFDM0_XBTxIQImbalance, 
++					rOFDM0_XCTxAFE, 			rOFDM0_XDTxAFE, 
++					rOFDM0_RxIQExtAnta};
++
++
++#if MP_DRIVER == 1	
++	bStartContTx = pAdapter->mppriv.MptCtx.bStartContTx;
++	bSingleTone = pAdapter->mppriv.MptCtx.bSingleTone;
++	bCarrierSuppression = pAdapter->mppriv.MptCtx.bCarrierSuppression;	
++#endif
++
++	//ignore IQK when continuous Tx
++	if(bStartContTx || bSingleTone || bCarrierSuppression)
++		return;
++
++#if DISABLE_BB_RF
++	return;
++#endif
++
++	if(bReCovery)
++	{
++		_PHY_ReloadADDARegisters(pAdapter, IQK_BB_REG_92C, pdmpriv->IQK_BB_backup_recover, 9);
++		return;
++	}
++	DBG_8192C("IQK:Start!!!\n");
++
++	for(i = 0; i < 8; i++)
++	{
++		result[0][i] = 0;
++		result[1][i] = 0;
++		result[2][i] = 0;
++		result[3][i] = 0;
++	}
++	final_candidate = 0xff;
++	bPathAOK = _FALSE;
++	bPathBOK = _FALSE;
++	is12simular = _FALSE;
++	is23simular = _FALSE;
++	is13simular = _FALSE;
++
++	for (i=0; i<3; i++)
++	{
++	 	if(IS_92C_SERIAL( pHalData->VersionID)){
++			 _PHY_IQCalibrate(pAdapter, result, i, _TRUE);
++	 	}
++	 	else{
++	 		// For 88C 1T1R
++	 		_PHY_IQCalibrate(pAdapter, result, i, _FALSE);
++ 		}
++		
++		if(i == 1)
++		{
++			is12simular = _PHY_SimularityCompare(pAdapter, result, 0, 1);
++			if(is12simular)
++			{
++				final_candidate = 0;
++				break;
++			}
++		}
++		
++		if(i == 2)
++		{
++			is13simular = _PHY_SimularityCompare(pAdapter, result, 0, 2);
++			if(is13simular)
++			{
++				final_candidate = 0;			
++				break;
++			}
++			
++			is23simular = _PHY_SimularityCompare(pAdapter, result, 1, 2);
++			if(is23simular)
++				final_candidate = 1;
++			else
++			{
++				for(i = 0; i < 8; i++)
++					RegTmp += result[3][i];
++
++				if(RegTmp != 0)
++					final_candidate = 3;			
++				else
++					final_candidate = 0xFF;
++			}
++		}
++	}
++
++        for (i=0; i<4; i++)
++	{
++		RegE94 = result[i][0];
++		RegE9C = result[i][1];
++		RegEA4 = result[i][2];
++		RegEAC = result[i][3];
++		RegEB4 = result[i][4];
++		RegEBC = result[i][5];
++		RegEC4 = result[i][6];
++		RegECC = result[i][7];
++		//RTPRINT(FINIT, INIT_IQK, ("IQK: RegE94=%lx RegE9C=%lx RegEA4=%lx RegEAC=%lx RegEB4=%lx RegEBC=%lx RegEC4=%lx RegECC=%lx\n ", RegE94, RegE9C, RegEA4, RegEAC, RegEB4, RegEBC, RegEC4, RegECC));
++	}
++
++	if(final_candidate != 0xff)
++	{
++		pdmpriv->RegE94 = RegE94 = result[final_candidate][0];
++		pdmpriv->RegE9C = RegE9C = result[final_candidate][1];
++		RegEA4 = result[final_candidate][2];
++		RegEAC = result[final_candidate][3];
++		pdmpriv->RegEB4 = RegEB4 = result[final_candidate][4];
++		pdmpriv->RegEBC = RegEBC = result[final_candidate][5];
++		RegEC4 = result[final_candidate][6];
++		RegECC = result[final_candidate][7];
++		DBG_8192C("IQK: final_candidate is %x\n", final_candidate);
++		DBG_8192C("IQK: RegE94=%x RegE9C=%x RegEA4=%x RegEAC=%x RegEB4=%x RegEBC=%x RegEC4=%x RegECC=%x\n ", RegE94, RegE9C, RegEA4, RegEAC, RegEB4, RegEBC, RegEC4, RegECC);
++		bPathAOK = bPathBOK = _TRUE;
++	}
++	else
++	{
++		RegE94 = RegEB4 = pdmpriv->RegE94 = pdmpriv->RegEB4 = 0x100;	//X default value
++		RegE9C = RegEBC = pdmpriv->RegE9C = pdmpriv->RegEBC = 0x0;		//Y default value
++	}
++	
++	if((RegE94 != 0)/*&&(RegEA4 != 0)*/)
++		_PHY_PathAFillIQKMatrix(pAdapter, bPathAOK, result, final_candidate, (RegEA4 == 0));
++	
++	if(IS_92C_SERIAL( pHalData->VersionID)){
++		if((RegEB4 != 0)/*&&(RegEC4 != 0)*/)
++		_PHY_PathBFillIQKMatrix(pAdapter, bPathBOK, result, final_candidate, (RegEC4 == 0));
++	}
++
++	_PHY_SaveADDARegisters(pAdapter, IQK_BB_REG_92C, pdmpriv->IQK_BB_backup_recover, 9);
++
++}
++
++
++VOID
++rtl8192c_PHY_LCCalibrate(
++	IN	PADAPTER	pAdapter
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	struct mlme_ext_priv	*pmlmeext = &pAdapter->mlmeextpriv;
++	BOOLEAN 	bStartContTx = _FALSE, bSingleTone = _FALSE, bCarrierSuppression = _FALSE;
++
++#if MP_DRIVER == 1
++	bStartContTx = pAdapter->mppriv.MptCtx.bStartContTx;
++	bSingleTone = pAdapter->mppriv.MptCtx.bSingleTone;
++	bCarrierSuppression = pAdapter->mppriv.MptCtx.bCarrierSuppression;
++#endif
++
++#if DISABLE_BB_RF
++	return;
++#endif
++
++	//ignore IQK when continuous Tx
++	if(bStartContTx || bSingleTone || bCarrierSuppression)
++		return;
++
++	if(pmlmeext->sitesurvey_res.state == SCAN_PROCESS)
++		return;
++
++	if(IS_92C_SERIAL( pHalData->VersionID)){
++		_PHY_LCCalibrate(pAdapter, _TRUE);
++	}
++	else{
++		// For 88C 1T1R
++		_PHY_LCCalibrate(pAdapter, _FALSE);
++	}
++}
++
++VOID
++rtl8192c_PHY_APCalibrate(
++	IN	PADAPTER	pAdapter,
++	IN	char 		delta	
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++
++	//default disable APK, because Tx NG issue, suggest by Jenyu, 2011.11.25
++	return;
++
++#if DISABLE_BB_RF
++	return;
++#endif
++
++	if(pdmpriv->bAPKdone)
++		return;
++
++	if(IS_92C_SERIAL( pHalData->VersionID)){
++		_PHY_APCalibrate(pAdapter, delta, _TRUE);
++	}
++	else{
++		// For 88C 1T1R
++		_PHY_APCalibrate(pAdapter, delta, _FALSE);
++	}
++}
++
++VOID rtl8192c_PHY_SetRFPathSwitch(
++	IN	PADAPTER	pAdapter,
++	IN	BOOLEAN		bMain
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++
++#if DISABLE_BB_RF
++	return;
++#endif
++
++	if(IS_92C_SERIAL( pHalData->VersionID)){
++		_PHY_SetRFPathSwitch(pAdapter, bMain, _TRUE);
++	}
++	else{
++		// For 88C 1T1R
++		_PHY_SetRFPathSwitch(pAdapter, bMain, _FALSE);
++	}
++}
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_rf6052.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_rf6052.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_rf6052.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_rf6052.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,1031 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++/******************************************************************************
++ * 
++ * 
++ * Module:	rtl8192c_rf6052.c	( Source C File)
++ * 
++ * Note:	Provide RF 6052 series relative API.	 
++ *
++ * Function:	
++ * 		 
++ * Export:	
++ * 
++ * Abbrev:	
++ * 
++ * History:
++ * Data			Who		Remark
++ * 
++ * 09/25/2008	MHC		Create initial version.
++ * 11/05/2008 	MHC		Add API for tw power setting.
++ * 
++ * 	
++******************************************************************************/
++
++#define _RTL8192C_RF6052_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <rtw_byteorder.h>
++
++#include <rtl8192c_hal.h>
++
++/*---------------------------Define Local Constant---------------------------*/
++// Define local structure for debug!!!!!
++typedef struct RF_Shadow_Compare_Map {
++	// Shadow register value
++	u32		Value;
++	// Compare or not flag
++	u8		Compare;
++	// Record If it had ever modified unpredicted
++	u8		ErrorOrNot;
++	// Recorver Flag
++	u8		Recorver;
++	//
++	u8		Driver_Write;
++}RF_SHADOW_T;
++/*---------------------------Define Local Constant---------------------------*/
++
++
++/*------------------------Define global variable-----------------------------*/
++/*------------------------Define global variable-----------------------------*/
++
++
++/*------------------------Define local variable------------------------------*/
++// 2008/11/20 MH For Debug only, RF
++//static	RF_SHADOW_T	RF_Shadow[RF6052_MAX_PATH][RF6052_MAX_REG] = {0};
++static	RF_SHADOW_T	RF_Shadow[RF6052_MAX_PATH][RF6052_MAX_REG];
++/*------------------------Define local variable------------------------------*/
++
++
++/*-----------------------------------------------------------------------------
++ * Function:	RF_ChangeTxPath
++ *
++ * Overview:	For RL6052, we must change some RF settign for 1T or 2T.
++ *
++ * Input:		u2Byte DataRate		// 0x80-8f, 0x90-9f
++ *
++ * Output:      NONE
++ *
++ * Return:      NONE
++ *
++ * Revised History:
++ * When			Who		Remark
++ * 09/25/2008 	MHC		Create Version 0.
++ *						Firmwaer support the utility later.
++ *
++ *---------------------------------------------------------------------------*/
++void rtl8192c_RF_ChangeTxPath(	IN	PADAPTER	Adapter, 
++										IN	u16		DataRate)
++{
++// We do not support gain table change inACUT now !!!! Delete later !!!
++#if 0//(RTL92SE_FPGA_VERIFY == 0)
++	static	u1Byte	RF_Path_Type = 2;	// 1 = 1T 2= 2T			
++	static	u4Byte	tx_gain_tbl1[6] 
++			= {0x17f50, 0x11f40, 0x0cf30, 0x08720, 0x04310, 0x00100};
++	static	u4Byte	tx_gain_tbl2[6] 
++			= {0x15ea0, 0x10e90, 0x0c680, 0x08250, 0x04040, 0x00030};
++	u1Byte	i;
++	
++	if (RF_Path_Type == 2 && (DataRate&0xF) <= 0x7)
++	{
++		// Set TX SYNC power G2G3 loop filter
++		PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)RF_PATH_A, 
++					RF_TXPA_G2, bRFRegOffsetMask, 0x0f000);
++		PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)RF_PATH_A, 
++					RF_TXPA_G3, bRFRegOffsetMask, 0xeacf1);
++
++		// Change TX AGC gain table
++		for (i = 0; i < 6; i++)					
++			PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)RF_PATH_A, 
++						RF_TX_AGC, bRFRegOffsetMask, tx_gain_tbl1[i]);
++
++		// Set PA to high value
++		PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)RF_PATH_A, 
++					RF_TXPA_G2, bRFRegOffsetMask, 0x01e39);
++	}
++	else if (RF_Path_Type == 1 && (DataRate&0xF) >= 0x8)
++	{
++		// Set TX SYNC power G2G3 loop filter
++		PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)RF_PATH_A, 
++					RF_TXPA_G2, bRFRegOffsetMask, 0x04440);
++		PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)RF_PATH_A, 
++					RF_TXPA_G3, bRFRegOffsetMask, 0xea4f1);
++
++		// Change TX AGC gain table
++		for (i = 0; i < 6; i++)
++			PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)RF_PATH_A, 
++						RF_TX_AGC, bRFRegOffsetMask, tx_gain_tbl2[i]);
++
++		// Set PA low gain
++		PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)RF_PATH_A, 
++					RF_TXPA_G2, bRFRegOffsetMask, 0x01e19);
++	}
++#endif	
++	
++}	/* RF_ChangeTxPath */
++
++
++/*-----------------------------------------------------------------------------
++ * Function:    PHY_RF6052SetBandwidth()
++ *
++ * Overview:    This function is called by SetBWModeCallback8190Pci() only
++ *
++ * Input:       PADAPTER				Adapter
++ *			WIRELESS_BANDWIDTH_E	Bandwidth	//20M or 40M
++ *
++ * Output:      NONE
++ *
++ * Return:      NONE
++ *
++ * Note:		For RF type 0222D
++ *---------------------------------------------------------------------------*/
++VOID
++rtl8192c_PHY_RF6052SetBandwidth(
++	IN	PADAPTER				Adapter,
++	IN	HT_CHANNEL_WIDTH		Bandwidth)	//20M or 40M
++{	
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	
++	switch(Bandwidth)
++	{
++		case HT_CHANNEL_WIDTH_20:
++			pHalData->RfRegChnlVal[0] = ((pHalData->RfRegChnlVal[0] & 0xfffff3ff) | 0x0400);
++			PHY_SetRFReg(Adapter, RF_PATH_A, RF_CHNLBW, bRFRegOffsetMask, pHalData->RfRegChnlVal[0]);
++			break;
++				
++		case HT_CHANNEL_WIDTH_40:
++			pHalData->RfRegChnlVal[0] = ((pHalData->RfRegChnlVal[0] & 0xfffff3ff));
++			PHY_SetRFReg(Adapter, RF_PATH_A, RF_CHNLBW, bRFRegOffsetMask, pHalData->RfRegChnlVal[0]);			
++			break;
++				
++		default:
++			//RT_TRACE(COMP_DBG, DBG_LOUD, ("PHY_SetRF8225Bandwidth(): unknown Bandwidth: %#X\n",Bandwidth ));
++			break;			
++	}
++	
++}
++
++
++/*-----------------------------------------------------------------------------
++ * Function:	PHY_RF6052SetCckTxPower
++ *
++ * Overview:	
++ *
++ * Input:       NONE
++ *
++ * Output:      NONE
++ *
++ * Return:      NONE
++ *
++ * Revised History:
++ * When			Who		Remark
++ * 11/05/2008 	MHC		Simulate 8192series..
++ *
++ *---------------------------------------------------------------------------*/
++
++VOID
++rtl8192c_PHY_RF6052SetCckTxPower(
++	IN	PADAPTER		Adapter,
++	IN	u8*			pPowerlevel)
++{
++	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(Adapter);
++	struct mlme_priv	*pmlmepriv = &Adapter->mlmepriv;
++	struct dm_priv		*pdmpriv = &pHalData->dmpriv;
++	struct mlme_ext_priv 		*pmlmeext = &Adapter->mlmeextpriv;
++	//PMGNT_INFO		pMgntInfo=&Adapter->MgntInfo;	
++	u32			TxAGC[2]={0, 0}, tmpval=0;
++	BOOLEAN		TurboScanOff = _FALSE;
++	u8			idx1, idx2;
++	u8*			ptr;
++
++	// 2010/10/18 MH Accorsing to SD3 eechou's suggestion, we need to disable turbo scan for RU.	
++	// Otherwise, external PA will be broken if power index > 0x20.
++#ifdef CONFIG_USB_HCI
++	if (pHalData->EEPROMRegulatory != 0 || pHalData->ExternalPA)
++#else
++	if (pHalData->EEPROMRegulatory != 0)
++#endif
++	{
++		//DbgPrint("TurboScanOff=1 EEPROMRegulatory=%d ExternalPA=%d\n", pHalData->EEPROMRegulatory, pHalData->ExternalPA);
++		TurboScanOff = _TRUE;
++	}
++
++	if(pmlmeext->sitesurvey_res.state == SCAN_PROCESS)
++	{
++		TxAGC[RF_PATH_A] = 0x3f3f3f3f;
++		TxAGC[RF_PATH_B] = 0x3f3f3f3f;
++
++		TurboScanOff = _TRUE;//disable turbo scan
++		
++		if(TurboScanOff)
++		{
++			for(idx1=RF_PATH_A; idx1<=RF_PATH_B; idx1++)
++			{
++				TxAGC[idx1] = 
++					pPowerlevel[idx1] | (pPowerlevel[idx1]<<8) |
++					(pPowerlevel[idx1]<<16) | (pPowerlevel[idx1]<<24);
++#ifdef CONFIG_USB_HCI
++				// 2010/10/18 MH For external PA module. We need to limit power index to be less than 0x20.
++				if (TxAGC[idx1] > 0x20 && pHalData->ExternalPA)
++					TxAGC[idx1] = 0x20;
++#endif
++			}
++		}
++	}
++	else
++	{
++// 20100427 Joseph: Driver dynamic Tx power shall not affect Tx power. It shall be determined by power training mechanism.
++// Currently, we cannot fully disable driver dynamic tx power mechanism because it is referenced by BT coexist mechanism.
++// In the future, two mechanism shall be separated from each other and maintained independantly. Thanks for Lanhsin's reminder.
++		if(pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1)
++		{	
++			TxAGC[RF_PATH_A] = 0x10101010;
++			TxAGC[RF_PATH_B] = 0x10101010;
++		}
++		else if(pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level2)
++		{	
++			TxAGC[RF_PATH_A] = 0x00000000;
++			TxAGC[RF_PATH_B] = 0x00000000;
++		}
++		else
++		{
++			for(idx1=RF_PATH_A; idx1<=RF_PATH_B; idx1++)
++			{
++				TxAGC[idx1] = 
++					pPowerlevel[idx1] | (pPowerlevel[idx1]<<8) |
++					(pPowerlevel[idx1]<<16) | (pPowerlevel[idx1]<<24);
++			}
++
++			if(pHalData->EEPROMRegulatory==0)
++			{
++				tmpval = (pHalData->MCSTxPowerLevelOriginalOffset[0][6]) + 
++						(pHalData->MCSTxPowerLevelOriginalOffset[0][7]<<8);
++				TxAGC[RF_PATH_A] += tmpval;
++				
++				tmpval = (pHalData->MCSTxPowerLevelOriginalOffset[0][14]) + 
++						(pHalData->MCSTxPowerLevelOriginalOffset[0][15]<<24);
++				TxAGC[RF_PATH_B] += tmpval;
++			}
++		}
++	}
++
++	for(idx1=RF_PATH_A; idx1<=RF_PATH_B; idx1++)
++	{
++		ptr = (u8*)(&(TxAGC[idx1]));
++		for(idx2=0; idx2<4; idx2++)
++		{
++			if(*ptr > RF6052_MAX_TX_PWR)
++				*ptr = RF6052_MAX_TX_PWR;
++			ptr++;
++		}
++	}
++
++	// rf-A cck tx power
++	tmpval = TxAGC[RF_PATH_A]&0xff;
++	PHY_SetBBReg(Adapter, rTxAGC_A_CCK1_Mcs32, bMaskByte1, tmpval);
++	//RTPRINT(FPHY, PHY_TXPWR, ("CCK PWR 1M (rf-A) = 0x%x (reg 0x%x)\n", tmpval, rTxAGC_A_CCK1_Mcs32));
++	tmpval = TxAGC[RF_PATH_A]>>8;
++	PHY_SetBBReg(Adapter, rTxAGC_B_CCK11_A_CCK2_11, 0xffffff00, tmpval);
++	//RTPRINT(FPHY, PHY_TXPWR, ("CCK PWR 2~11M (rf-A) = 0x%x (reg 0x%x)\n", tmpval, rTxAGC_B_CCK11_A_CCK2_11));
++
++	// rf-B cck tx power
++	tmpval = TxAGC[RF_PATH_B]>>24;
++	PHY_SetBBReg(Adapter, rTxAGC_B_CCK11_A_CCK2_11, bMaskByte0, tmpval);
++	//RTPRINT(FPHY, PHY_TXPWR, ("CCK PWR 11M (rf-B) = 0x%x (reg 0x%x)\n", tmpval, rTxAGC_B_CCK11_A_CCK2_11));
++	tmpval = TxAGC[RF_PATH_B]&0x00ffffff;
++	PHY_SetBBReg(Adapter, rTxAGC_B_CCK1_55_Mcs32, 0xffffff00, tmpval);
++	//RTPRINT(FPHY, PHY_TXPWR, ("CCK PWR 1~5.5M (rf-B) = 0x%x (reg 0x%x)\n", 
++	//	tmpval, rTxAGC_B_CCK1_55_Mcs32));
++	
++}	/* PHY_RF6052SetCckTxPower */
++
++//
++// powerbase0 for OFDM rates
++// powerbase1 for HT MCS rates
++//
++static void getPowerBase(
++	IN	PADAPTER	Adapter,
++	IN	u8*		pPowerLevel,
++	IN	u8		Channel,
++	IN OUT u32*	OfdmBase,
++	IN OUT u32*	MCSBase
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	u32			powerBase0, powerBase1;
++	u8			Legacy_pwrdiff=0;
++	s8			HT20_pwrdiff=0;
++	u8			i, powerlevel[2];
++
++	for(i=0; i<2; i++)
++	{
++		powerlevel[i] = pPowerLevel[i];
++		Legacy_pwrdiff = pHalData->TxPwrLegacyHtDiff[i][Channel-1];			
++		powerBase0 = powerlevel[i] + Legacy_pwrdiff; 
++
++		powerBase0 = (powerBase0<<24) | (powerBase0<<16) |(powerBase0<<8) |powerBase0;
++		*(OfdmBase+i) = powerBase0;
++		//RTPRINT(FPHY, PHY_TXPWR, (" [OFDM power base index rf(%c) = 0x%x]\n", ((i==0)?'A':'B'), *(OfdmBase+i)));
++	}
++
++	for(i=0; i<2; i++)
++	{
++		//Check HT20 to HT40 diff
++		if(pHalData->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
++		{
++			HT20_pwrdiff = pHalData->TxPwrHt20Diff[i][Channel-1];
++			powerlevel[i] += HT20_pwrdiff;
++		}
++		powerBase1 = powerlevel[i];
++		powerBase1 = (powerBase1<<24) | (powerBase1<<16) |(powerBase1<<8) |powerBase1;
++		*(MCSBase+i) = powerBase1;
++		//RTPRINT(FPHY, PHY_TXPWR, (" [MCS power base index rf(%c) = 0x%x]\n", ((i==0)?'A':'B'), *(MCSBase+i)));
++	}
++}
++
++static void getTxPowerWriteValByRegulatory(
++	IN		PADAPTER	Adapter,
++	IN		u8		Channel,
++	IN		u8		index,
++	IN		u32*		powerBase0,
++	IN		u32*		powerBase1,
++	OUT		u32*		pOutWriteVal
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	u8	i, chnlGroup, pwr_diff_limit[4];
++	u32 	writeVal, customer_limit, rf;
++	
++	//
++	// Index 0 & 1= legacy OFDM, 2-5=HT_MCS rate
++	//
++	for(rf=0; rf<2; rf++)
++	{
++		switch(pHalData->EEPROMRegulatory)
++		{
++			case 0:	// Realtek better performance
++					// increase power diff defined by Realtek for large power
++				chnlGroup = 0;
++				//RTPRINT(FPHY, PHY_TXPWR, ("MCSTxPowerLevelOriginalOffset[%d][%d] = 0x%x\n", 
++				//	chnlGroup, index, pHalData->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf?8:0)]));
++				writeVal = pHalData->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf?8:0)] + 
++					((index<2)?powerBase0[rf]:powerBase1[rf]);
++				//RTPRINT(FPHY, PHY_TXPWR, ("RTK better performance, writeVal(%c) = 0x%x\n", ((rf==0)?'A':'B'), writeVal));
++				break;
++			case 1:	// Realtek regulatory
++					// increase power diff defined by Realtek for regulatory
++				{
++					if(pHalData->pwrGroupCnt == 1)
++						chnlGroup = 0;
++					if(pHalData->pwrGroupCnt >= 3)
++					{
++						if(Channel <= 3)
++							chnlGroup = 0;
++						else if(Channel >= 4 && Channel <= 9)
++							chnlGroup = 1;
++						else if(Channel > 9)
++							chnlGroup = 2;
++
++						if(pHalData->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
++							chnlGroup++;
++						else
++							chnlGroup+=4;
++					}
++					//RTPRINT(FPHY, PHY_TXPWR, ("MCSTxPowerLevelOriginalOffset[%d][%d] = 0x%x\n", 
++					//chnlGroup, index, pHalData->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf?8:0)]));
++					writeVal = pHalData->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf?8:0)] + 
++							((index<2)?powerBase0[rf]:powerBase1[rf]);
++					//RTPRINT(FPHY, PHY_TXPWR, ("Realtek regulatory, 20MHz, writeVal(%c) = 0x%x\n", ((rf==0)?'A':'B'), writeVal));
++				}
++				break;
++			case 2:	// Better regulatory
++					// don't increase any power diff
++				writeVal = ((index<2)?powerBase0[rf]:powerBase1[rf]);
++				//RTPRINT(FPHY, PHY_TXPWR, ("Better regulatory, writeVal(%c) = 0x%x\n", ((rf==0)?'A':'B'), writeVal));
++				break;
++			case 3:	// Customer defined power diff.
++					// increase power diff defined by customer.
++				chnlGroup = 0;
++				//RTPRINT(FPHY, PHY_TXPWR, ("MCSTxPowerLevelOriginalOffset[%d][%d] = 0x%x\n", 
++				//	chnlGroup, index, pHalData->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf?8:0)]));
++
++				if (pHalData->CurrentChannelBW == HT_CHANNEL_WIDTH_40)
++				{
++					//RTPRINT(FPHY, PHY_TXPWR, ("customer's limit, 40MHz rf(%c) = 0x%x\n", 
++					//	((rf==0)?'A':'B'), pHalData->PwrGroupHT40[rf][Channel-1]));
++				}
++				else
++				{
++					//RTPRINT(FPHY, PHY_TXPWR, ("customer's limit, 20MHz rf(%c) = 0x%x\n", 
++					//	((rf==0)?'A':'B'), pHalData->PwrGroupHT20[rf][Channel-1]));
++				}
++				for (i=0; i<4; i++)
++				{
++					pwr_diff_limit[i] = (u8)((pHalData->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf?8:0)]&(0x7f<<(i*8)))>>(i*8));
++					if (pHalData->CurrentChannelBW == HT_CHANNEL_WIDTH_40)
++					{
++						if(pwr_diff_limit[i] > pHalData->PwrGroupHT40[rf][Channel-1])
++							pwr_diff_limit[i] = pHalData->PwrGroupHT40[rf][Channel-1];
++					}
++					else
++					{
++						if(pwr_diff_limit[i] > pHalData->PwrGroupHT20[rf][Channel-1])
++							pwr_diff_limit[i] = pHalData->PwrGroupHT20[rf][Channel-1];
++					}
++				}
++				customer_limit = (pwr_diff_limit[3]<<24) | (pwr_diff_limit[2]<<16) |
++								(pwr_diff_limit[1]<<8) | (pwr_diff_limit[0]);
++				//RTPRINT(FPHY, PHY_TXPWR, ("Customer's limit rf(%c) = 0x%x\n", ((rf==0)?'A':'B'), customer_limit));
++
++				writeVal = customer_limit + ((index<2)?powerBase0[rf]:powerBase1[rf]);
++				//RTPRINT(FPHY, PHY_TXPWR, ("Customer, writeVal rf(%c)= 0x%x\n", ((rf==0)?'A':'B'), writeVal));
++				break;
++			default:
++				chnlGroup = 0;
++				writeVal = pHalData->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf?8:0)] + 
++						((index<2)?powerBase0[rf]:powerBase1[rf]);
++				//RTPRINT(FPHY, PHY_TXPWR, ("RTK better performance, writeVal rf(%c) = 0x%x\n", ((rf==0)?'A':'B'), writeVal));
++				break;
++		}
++
++// 20100427 Joseph: Driver dynamic Tx power shall not affect Tx power. It shall be determined by power training mechanism.
++// Currently, we cannot fully disable driver dynamic tx power mechanism because it is referenced by BT coexist mechanism.
++// In the future, two mechanism shall be separated from each other and maintained independantly. Thanks for Lanhsin's reminder.
++
++		if(pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1)
++			writeVal = 0x14141414;
++		else if(pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level2)
++			writeVal = 0x00000000;
++
++
++		// 20100628 Joseph: High power mode for BT-Coexist mechanism.
++		// This mechanism is only applied when Driver-Highpower-Mechanism is OFF.
++		if(pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_BT1)
++		{
++			//RTPRINT(FBT, BT_TRACE, ("Tx Power (-6)\n"));
++			writeVal = writeVal - 0x06060606;
++		}
++		else if(pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_BT2)
++		{
++			//RTPRINT(FBT, BT_TRACE, ("Tx Power (-0)\n"));
++			writeVal = writeVal;
++		}
++		*(pOutWriteVal+rf) = writeVal;
++	}
++}
++
++static void writeOFDMPowerReg(
++	IN		PADAPTER	Adapter,
++	IN		u8		index,
++	IN 		u32*		pValue
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	u16 RegOffset_A[6] = {	rTxAGC_A_Rate18_06, rTxAGC_A_Rate54_24, 
++							rTxAGC_A_Mcs03_Mcs00, rTxAGC_A_Mcs07_Mcs04, 
++							rTxAGC_A_Mcs11_Mcs08, rTxAGC_A_Mcs15_Mcs12};
++	u16 RegOffset_B[6] = {	rTxAGC_B_Rate18_06, rTxAGC_B_Rate54_24, 
++							rTxAGC_B_Mcs03_Mcs00, rTxAGC_B_Mcs07_Mcs04,
++							rTxAGC_B_Mcs11_Mcs08, rTxAGC_B_Mcs15_Mcs12};
++	u8 i, rf, pwr_val[4];
++	u32 writeVal;
++	u16 RegOffset;
++
++	for(rf=0; rf<2; rf++)
++	{
++		writeVal = pValue[rf];
++		for(i=0; i<4; i++)
++		{
++			pwr_val[i] = (u8)((writeVal & (0x7f<<(i*8)))>>(i*8));
++			if (pwr_val[i]  > RF6052_MAX_TX_PWR)
++				pwr_val[i]  = RF6052_MAX_TX_PWR;
++		}
++		writeVal = (pwr_val[3]<<24) | (pwr_val[2]<<16) |(pwr_val[1]<<8) |pwr_val[0];
++
++		if(rf == 0)
++			RegOffset = RegOffset_A[index];
++		else
++			RegOffset = RegOffset_B[index];
++		
++		PHY_SetBBReg(Adapter, RegOffset, bMaskDWord, writeVal);
++		//RTPRINT(FPHY, PHY_TXPWR, ("Set 0x%x = %08x\n", RegOffset, writeVal));
++
++		// 201005115 Joseph: Set Tx Power diff for Tx power training mechanism.
++		if(((pHalData->rf_type == RF_2T2R) && 
++				(RegOffset == rTxAGC_A_Mcs15_Mcs12 || RegOffset == rTxAGC_B_Mcs15_Mcs12))||
++		     ((pHalData->rf_type != RF_2T2R) && 
++				(RegOffset == rTxAGC_A_Mcs07_Mcs04 || RegOffset == rTxAGC_B_Mcs07_Mcs04))	)
++		{
++			writeVal = pwr_val[3];
++			if(RegOffset == rTxAGC_A_Mcs15_Mcs12 || RegOffset == rTxAGC_A_Mcs07_Mcs04)
++				RegOffset = 0xc90;
++			if(RegOffset == rTxAGC_B_Mcs15_Mcs12 || RegOffset == rTxAGC_B_Mcs07_Mcs04)
++				RegOffset = 0xc98;
++			for(i=0; i<3; i++)
++			{
++				if(i!=2)
++					writeVal = (writeVal>8)?(writeVal-8):0;
++				else
++					writeVal = (writeVal>6)?(writeVal-6):0;
++				rtw_write8(Adapter, (u32)(RegOffset+i), (u8)writeVal);
++			}
++		}
++	}
++}
++/*-----------------------------------------------------------------------------
++ * Function:	PHY_RF6052SetOFDMTxPower
++ *
++ * Overview:	For legacy and HY OFDM, we must read EEPROM TX power index for 
++ *			different channel and read original value in TX power register area from
++ *			0xe00. We increase offset and original value to be correct tx pwr.
++ *
++ * Input:       NONE
++ *
++ * Output:      NONE
++ *
++ * Return:      NONE
++ *
++ * Revised History:
++ * When			Who		Remark
++ * 11/05/2008 	MHC		Simulate 8192 series method.
++ * 01/06/2009	MHC		1. Prevent Path B tx power overflow or underflow dure to
++ *						A/B pwr difference or legacy/HT pwr diff.
++ *						2. We concern with path B legacy/HT OFDM difference.
++ * 01/22/2009	MHC		Support new EPRO format from SD3.
++ *
++ *---------------------------------------------------------------------------*/
++VOID 
++rtl8192c_PHY_RF6052SetOFDMTxPower(
++	IN	PADAPTER	Adapter,
++	IN	u8*		pPowerLevel,
++	IN	u8		Channel)
++{
++	//HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	u32 writeVal[2], powerBase0[2], powerBase1[2];
++	u8 index = 0;
++
++	getPowerBase(Adapter, pPowerLevel, Channel, &powerBase0[0], &powerBase1[0]);
++
++	for(index=0; index<6; index++)
++	{
++		getTxPowerWriteValByRegulatory(Adapter, Channel, index, 
++			&powerBase0[0], &powerBase1[0], &writeVal[0]);
++
++		writeOFDMPowerReg(Adapter, index, &writeVal[0]);
++	}
++	
++}
++
++
++static VOID
++phy_RF6052_Config_HardCode(
++	IN	PADAPTER		Adapter
++	)
++{
++	
++	// Set Default Bandwidth to 20M
++	//Adapter->HalFunc	.SetBWModeHandler(Adapter, HT_CHANNEL_WIDTH_20);
++
++	// TODO: Set Default Channel to channel one for RTL8225
++	
++}
++
++static int
++phy_RF6052_Config_ParaFile(
++	IN	PADAPTER		Adapter
++	)
++{
++	u32					u4RegValue;
++	u8					eRFPath;		
++	BB_REGISTER_DEFINITION_T	*pPhyReg;	
++
++	int					rtStatus = _SUCCESS;
++	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(Adapter);
++	static char			sz88CRadioAFile[] = RTL8188C_PHY_RADIO_A;	
++	static char			sz88CRadioBFile[] = RTL8188C_PHY_RADIO_B;
++#ifdef CONFIG_USB_HCI
++	static char			sz88CRadioAFile_mCard[] = RTL8188C_PHY_RADIO_A_mCard;	
++	static char			sz88CRadioBFile_mCard[] = RTL8188C_PHY_RADIO_B_mCard;
++	static char			sz88CRadioAFile_HP[] = RTL8188C_PHY_RADIO_A_HP;	
++#endif
++	static char			sz92CRadioAFile[] = RTL8192C_PHY_RADIO_A;	
++	static char			sz92CRadioBFile[] = RTL8192C_PHY_RADIO_B;
++	static char			sz8723RadioAFile[] = RTL8723_PHY_RADIO_A;	
++	static char			sz8723RadioBFile[] = RTL8723_PHY_RADIO_B;
++	char					*pszRadioAFile, *pszRadioBFile;	
++
++
++	if(IS_HARDWARE_TYPE_8192C(Adapter))
++	{
++		if(IS_92C_SERIAL( pHalData->VersionID))// 88c's IPA  is different from 92c's
++		{
++			pszRadioAFile = sz92CRadioAFile;
++			pszRadioBFile = sz92CRadioBFile;
++		}
++		else
++		{
++			pszRadioAFile = sz88CRadioAFile;
++			pszRadioBFile = sz88CRadioBFile;
++#ifdef CONFIG_USB_HCI
++			if( BOARD_MINICARD == pHalData->BoardType)
++			{
++				pszRadioAFile = sz88CRadioAFile_mCard;
++				pszRadioBFile = sz88CRadioBFile_mCard;
++			}
++			else if( BOARD_USB_High_PA == pHalData->BoardType)
++			{
++				pszRadioAFile = sz88CRadioAFile_HP;
++			}
++#endif	
++		}
++	}
++	else if(IS_HARDWARE_TYPE_8723A(Adapter))
++	{
++		pszRadioAFile = sz8723RadioAFile;
++		pszRadioBFile = sz8723RadioBFile;	
++	}
++
++	//3//-----------------------------------------------------------------
++	//3// <2> Initialize RF
++	//3//-----------------------------------------------------------------
++	//for(eRFPath = RF_PATH_A; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
++	for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
++	{
++
++		pPhyReg = &pHalData->PHYRegDef[eRFPath];
++		
++		/*----Store original RFENV control type----*/		
++		switch(eRFPath)
++		{
++		case RF_PATH_A:
++		case RF_PATH_C:
++			u4RegValue = PHY_QueryBBReg(Adapter, pPhyReg->rfintfs, bRFSI_RFENV);
++			break;
++		case RF_PATH_B :
++		case RF_PATH_D:
++			u4RegValue = PHY_QueryBBReg(Adapter, pPhyReg->rfintfs, bRFSI_RFENV<<16);
++			break;
++		}
++
++		/*----Set RF_ENV enable----*/		
++		PHY_SetBBReg(Adapter, pPhyReg->rfintfe, bRFSI_RFENV<<16, 0x1);
++		rtw_udelay_os(1);//PlatformStallExecution(1);
++		
++		/*----Set RF_ENV output high----*/
++		PHY_SetBBReg(Adapter, pPhyReg->rfintfo, bRFSI_RFENV, 0x1);
++		rtw_udelay_os(1);//PlatformStallExecution(1);
++
++		/* Set bit number of Address and Data for RF register */
++		PHY_SetBBReg(Adapter, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0); 	// Set 1 to 4 bits for 8255
++		rtw_udelay_os(1);//PlatformStallExecution(1);
++
++		PHY_SetBBReg(Adapter, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0);	// Set 0 to 12  bits for 8255
++		rtw_udelay_os(1);//PlatformStallExecution(1);
++
++		/*----Initialize RF fom connfiguration file----*/
++		switch(eRFPath)
++		{
++		case RF_PATH_A:
++#ifdef CONFIG_EMBEDDED_FWIMG
++			rtStatus= rtl8192c_PHY_ConfigRFWithHeaderFile(Adapter,(RF_RADIO_PATH_E)eRFPath);
++#else
++			rtStatus = rtl8192c_PHY_ConfigRFWithParaFile(Adapter, pszRadioAFile, (RF_RADIO_PATH_E)eRFPath);
++#endif
++			break;
++		case RF_PATH_B:
++#ifdef CONFIG_EMBEDDED_FWIMG
++			rtStatus = rtl8192c_PHY_ConfigRFWithHeaderFile(Adapter,(RF_RADIO_PATH_E)eRFPath);
++#else			
++			rtStatus = rtl8192c_PHY_ConfigRFWithParaFile(Adapter, pszRadioBFile, (RF_RADIO_PATH_E)eRFPath);
++#endif
++			break;
++		case RF_PATH_C:
++			break;
++		case RF_PATH_D:
++			break;
++		}
++
++		/*----Restore RFENV control type----*/;
++		switch(eRFPath)
++		{
++		case RF_PATH_A:
++		case RF_PATH_C:
++			PHY_SetBBReg(Adapter, pPhyReg->rfintfs, bRFSI_RFENV, u4RegValue);
++			break;
++		case RF_PATH_B :
++		case RF_PATH_D:
++			PHY_SetBBReg(Adapter, pPhyReg->rfintfs, bRFSI_RFENV<<16, u4RegValue);
++			break;
++		}
++
++		if(rtStatus != _SUCCESS){
++			//RT_TRACE(COMP_FPGA, DBG_LOUD, ("phy_RF6052_Config_ParaFile():Radio[%d] Fail!!", eRFPath));
++			goto phy_RF6052_Config_ParaFile_Fail;
++		}
++
++	}
++
++	//RT_TRACE(COMP_INIT, DBG_LOUD, ("<---phy_RF6052_Config_ParaFile()\n"));
++	return rtStatus;
++	
++phy_RF6052_Config_ParaFile_Fail:	
++	return rtStatus;
++}
++
++
++int
++PHY_RF6052_Config8192C(
++	IN	PADAPTER		Adapter)
++{
++	HAL_DATA_TYPE				*pHalData = GET_HAL_DATA(Adapter);
++	int					rtStatus = _SUCCESS;	
++	
++	//
++	// Initialize general global value
++	//
++	// TODO: Extend RF_PATH_C and RF_PATH_D in the future
++	if(pHalData->rf_type == RF_1T1R)
++		pHalData->NumTotalRFPath = 1;
++	else
++		pHalData->NumTotalRFPath = 2;
++
++	//
++	// Config BB and RF
++	//
++	rtStatus = phy_RF6052_Config_ParaFile(Adapter);
++#if 0	
++	switch( Adapter->MgntInfo.bRegHwParaFile )
++	{
++		case 0:
++			phy_RF6052_Config_HardCode(Adapter);
++			break;
++
++		case 1:
++			rtStatus = phy_RF6052_Config_ParaFile(Adapter);
++			break;
++
++		case 2:
++			// Partial Modify. 
++			phy_RF6052_Config_HardCode(Adapter);
++			phy_RF6052_Config_ParaFile(Adapter);
++			break;
++
++		default:
++			phy_RF6052_Config_HardCode(Adapter);
++			break;
++	}
++#endif	
++	return rtStatus;
++		
++}
++
++
++//
++// ==> RF shadow Operation API Code Section!!!
++//
++/*-----------------------------------------------------------------------------
++ * Function:	PHY_RFShadowRead
++ *				PHY_RFShadowWrite
++ *				PHY_RFShadowCompare
++ *				PHY_RFShadowRecorver
++ *				PHY_RFShadowCompareAll
++ *				PHY_RFShadowRecorverAll
++ *				PHY_RFShadowCompareFlagSet
++ *				PHY_RFShadowRecorverFlagSet
++ *
++ * Overview:	When we set RF register, we must write shadow at first.
++ *			When we are running, we must compare shadow abd locate error addr.
++ *			Decide to recorver or not.
++ *
++ * Input:       NONE
++ *
++ * Output:      NONE
++ *
++ * Return:      NONE
++ *
++ * Revised History:
++ * When			Who		Remark
++ * 11/20/2008 	MHC		Create Version 0.
++ *
++ *---------------------------------------------------------------------------*/
++u32
++PHY_RFShadowRead(
++	IN	PADAPTER			Adapter,
++	IN	RF_RADIO_PATH_E	eRFPath,
++	IN	u32				Offset)
++{
++	return	RF_Shadow[eRFPath][Offset].Value;
++	
++}	/* PHY_RFShadowRead */
++
++
++VOID
++PHY_RFShadowWrite(
++	IN	PADAPTER			Adapter,
++	IN	RF_RADIO_PATH_E	eRFPath,
++	IN	u32				Offset,
++	IN	u32				Data)
++{
++	RF_Shadow[eRFPath][Offset].Value = (Data & bRFRegOffsetMask);
++	RF_Shadow[eRFPath][Offset].Driver_Write = _TRUE;
++	
++}	/* PHY_RFShadowWrite */
++
++
++BOOLEAN
++PHY_RFShadowCompare(
++	IN	PADAPTER			Adapter,
++	IN	RF_RADIO_PATH_E	eRFPath,
++	IN	u32				Offset)
++{
++	u32	reg;
++	// Check if we need to check the register
++	if (RF_Shadow[eRFPath][Offset].Compare == _TRUE)
++	{
++		reg = PHY_QueryRFReg(Adapter, eRFPath, Offset, bRFRegOffsetMask);
++		// Compare shadow and real rf register for 20bits!!
++		if (RF_Shadow[eRFPath][Offset].Value != reg)
++		{
++			// Locate error position.
++			RF_Shadow[eRFPath][Offset].ErrorOrNot = _TRUE;
++			//RT_TRACE(COMP_INIT, DBG_LOUD, 
++			//("PHY_RFShadowCompare RF-%d Addr%02lx Err = %05lx\n", 
++			//eRFPath, Offset, reg));
++		}
++		return RF_Shadow[eRFPath][Offset].ErrorOrNot ;
++	}
++	return _FALSE;
++}	/* PHY_RFShadowCompare */
++
++
++VOID
++PHY_RFShadowRecorver(
++	IN	PADAPTER			Adapter,
++	IN	RF_RADIO_PATH_E	eRFPath,
++	IN	u32				Offset)
++{
++	// Check if the address is error
++	if (RF_Shadow[eRFPath][Offset].ErrorOrNot == _TRUE)
++	{
++		// Check if we need to recorver the register.
++		if (RF_Shadow[eRFPath][Offset].Recorver == _TRUE)
++		{
++			PHY_SetRFReg(Adapter, eRFPath, Offset, bRFRegOffsetMask, 
++							RF_Shadow[eRFPath][Offset].Value);
++			//RT_TRACE(COMP_INIT, DBG_LOUD, 
++			//("PHY_RFShadowRecorver RF-%d Addr%02lx=%05lx", 
++			//eRFPath, Offset, RF_Shadow[eRFPath][Offset].Value));
++		}
++	}
++	
++}	/* PHY_RFShadowRecorver */
++
++
++VOID
++PHY_RFShadowCompareAll(
++	IN	PADAPTER			Adapter)
++{
++	u32		eRFPath;
++	u32		Offset;
++
++	for (eRFPath = 0; eRFPath < RF6052_MAX_PATH; eRFPath++)
++	{
++		for (Offset = 0; Offset <= RF6052_MAX_REG; Offset++)
++		{
++			PHY_RFShadowCompare(Adapter, (RF_RADIO_PATH_E)eRFPath, Offset);
++		}
++	}
++	
++}	/* PHY_RFShadowCompareAll */
++
++
++VOID
++PHY_RFShadowRecorverAll(
++	IN	PADAPTER			Adapter)
++{
++	u32		eRFPath;
++	u32		Offset;
++
++	for (eRFPath = 0; eRFPath < RF6052_MAX_PATH; eRFPath++)
++	{
++		for (Offset = 0; Offset <= RF6052_MAX_REG; Offset++)
++		{
++			PHY_RFShadowRecorver(Adapter, (RF_RADIO_PATH_E)eRFPath, Offset);
++		}
++	}
++	
++}	/* PHY_RFShadowRecorverAll */
++
++
++VOID
++PHY_RFShadowCompareFlagSet(
++	IN	PADAPTER			Adapter,
++	IN	RF_RADIO_PATH_E	eRFPath,
++	IN	u32				Offset,
++	IN	u8				Type)
++{
++	// Set True or False!!!
++	RF_Shadow[eRFPath][Offset].Compare = Type;
++		
++}	/* PHY_RFShadowCompareFlagSet */
++
++
++VOID
++PHY_RFShadowRecorverFlagSet(
++	IN	PADAPTER			Adapter,
++	IN	RF_RADIO_PATH_E	eRFPath,
++	IN	u32				Offset,
++	IN	u8				Type)
++{
++	// Set True or False!!!
++	RF_Shadow[eRFPath][Offset].Recorver= Type;
++		
++}	/* PHY_RFShadowRecorverFlagSet */
++
++
++VOID
++PHY_RFShadowCompareFlagSetAll(
++	IN	PADAPTER			Adapter)
++{
++	u32		eRFPath;
++	u32		Offset;
++
++	for (eRFPath = 0; eRFPath < RF6052_MAX_PATH; eRFPath++)
++	{
++		for (Offset = 0; Offset <= RF6052_MAX_REG; Offset++)
++		{
++			// 2008/11/20 MH For S3S4 test, we only check reg 26/27 now!!!!
++			if (Offset != 0x26 && Offset != 0x27)
++				PHY_RFShadowCompareFlagSet(Adapter, (RF_RADIO_PATH_E)eRFPath, Offset, _FALSE);
++			else
++				PHY_RFShadowCompareFlagSet(Adapter, (RF_RADIO_PATH_E)eRFPath, Offset, _TRUE);
++		}
++	}
++		
++}	/* PHY_RFShadowCompareFlagSetAll */
++
++
++VOID
++PHY_RFShadowRecorverFlagSetAll(
++	IN	PADAPTER			Adapter)
++{
++	u32		eRFPath;
++	u32		Offset;
++
++	for (eRFPath = 0; eRFPath < RF6052_MAX_PATH; eRFPath++)
++	{
++		for (Offset = 0; Offset <= RF6052_MAX_REG; Offset++)
++		{
++			// 2008/11/20 MH For S3S4 test, we only check reg 26/27 now!!!!
++			if (Offset != 0x26 && Offset != 0x27)
++				PHY_RFShadowRecorverFlagSet(Adapter, (RF_RADIO_PATH_E)eRFPath, Offset, _FALSE);
++			else
++				PHY_RFShadowRecorverFlagSet(Adapter, (RF_RADIO_PATH_E)eRFPath, Offset, _TRUE);
++		}
++	}
++		
++}	/* PHY_RFShadowCompareFlagSetAll */
++
++VOID
++PHY_RFShadowRefresh(
++	IN	PADAPTER			Adapter)
++{
++	u32		eRFPath;
++	u32		Offset;
++
++	for (eRFPath = 0; eRFPath < RF6052_MAX_PATH; eRFPath++)
++	{
++		for (Offset = 0; Offset <= RF6052_MAX_REG; Offset++)
++		{
++			RF_Shadow[eRFPath][Offset].Value = 0;
++			RF_Shadow[eRFPath][Offset].Compare = _FALSE;
++			RF_Shadow[eRFPath][Offset].Recorver  = _FALSE;
++			RF_Shadow[eRFPath][Offset].ErrorOrNot = _FALSE;
++			RF_Shadow[eRFPath][Offset].Driver_Write = _FALSE;
++		}
++	}
++	
++}	/* PHY_RFShadowRead */
++
++/* End of HalRf6052.c */
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_rxdesc.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_rxdesc.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_rxdesc.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_rxdesc.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,876 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _RTL8192C_REDESC_C_
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <rtl8192c_hal.h>
++
++static u8 evm_db2percentage(s8 value)
++{
++	//
++	// -33dB~0dB to 0%~99%
++	//
++	s8 ret_val;
++
++	ret_val = value;
++	//ret_val /= 2;
++
++	RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("EVMdbToPercentage92S Value=%d / %x \n", ret_val, ret_val));
++
++	if(ret_val >= 0)
++		ret_val = 0;
++	if(ret_val <= -33)
++		ret_val = -33;
++
++	ret_val = 0 - ret_val;
++	ret_val*=3;
++
++	if(ret_val == 99)
++		ret_val = 100;
++
++	return(ret_val);
++}
++
++
++static s32 signal_scale_mapping(_adapter *padapter, s32 cur_sig )
++{
++	s32 ret_sig;
++
++#ifdef CONFIG_USB_HCI
++	if(cur_sig >= 51 && cur_sig <= 100)
++	{
++		ret_sig = 100;
++	}
++	else if(cur_sig >= 41 && cur_sig <= 50)
++	{
++		ret_sig = 80 + ((cur_sig - 40)*2);
++	}
++	else if(cur_sig >= 31 && cur_sig <= 40)
++	{
++		ret_sig = 66 + (cur_sig - 30);
++	}
++	else if(cur_sig >= 21 && cur_sig <= 30)
++	{
++		ret_sig = 54 + (cur_sig - 20);
++	}
++	else if(cur_sig >= 10 && cur_sig <= 20)
++	{
++		ret_sig = 42 + (((cur_sig - 10) * 2) / 3);
++	}
++	else if(cur_sig >= 5 && cur_sig <= 9)
++	{
++		ret_sig = 22 + (((cur_sig - 5) * 3) / 2);
++	}
++	else if(cur_sig >= 1 && cur_sig <= 4)
++	{
++		ret_sig = 6 + (((cur_sig - 1) * 3) / 2);
++	}
++	else
++	{
++		ret_sig = cur_sig;
++	}
++#else
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++
++	if(pHalData->CustomerID == RT_CID_819x_Lenovo)
++	{
++		// Step 1. Scale mapping.
++		// 20100611 Joseph: Re-tunning RSSI presentation for Lenovo.
++		// 20100426 Joseph: Modify Signal strength mapping.
++		// This modification makes the RSSI indication similar to Intel solution.
++		// 20100414 Joseph: Tunning RSSI for Lenovo according to RTL8191SE.
++		if(cur_sig >= 54 && cur_sig <= 100)
++		{
++			ret_sig = 100;
++		}
++		else if(cur_sig>=42 && cur_sig <= 53 )
++		{
++			ret_sig = 95;
++		}
++		else if(cur_sig>=36 && cur_sig <= 41 )
++		{
++			ret_sig = 74 + ((cur_sig - 36) *20)/6;
++		}
++		else if(cur_sig>=33 && cur_sig <= 35 )
++		{
++			ret_sig = 65 + ((cur_sig - 33) *8)/2;
++		}
++		else if(cur_sig>=18 && cur_sig <= 32 )
++		{
++			ret_sig = 62 + ((cur_sig - 18) *2)/15;
++		}
++		else if(cur_sig>=15 && cur_sig <= 17 )
++		{
++			ret_sig = 33 + ((cur_sig - 15) *28)/2;
++		}
++		else if(cur_sig>=10 && cur_sig <= 14 )
++		{
++			ret_sig = 39;
++		}
++		else if(cur_sig>=8 && cur_sig <= 9 )
++		{
++			ret_sig = 33;
++		}
++		else if(cur_sig <= 8 )
++		{
++			ret_sig = 19;
++		}
++	}
++	else
++	{
++		// Step 1. Scale mapping.
++		if(cur_sig >= 61 && cur_sig <= 100)
++		{
++			ret_sig = 90 + ((cur_sig - 60) / 4);
++		}
++		else if(cur_sig >= 41 && cur_sig <= 60)
++		{
++			ret_sig = 78 + ((cur_sig - 40) / 2);
++		}
++		else if(cur_sig >= 31 && cur_sig <= 40)
++		{
++			ret_sig = 66 + (cur_sig - 30);
++		}
++		else if(cur_sig >= 21 && cur_sig <= 30)
++		{
++			ret_sig = 54 + (cur_sig - 20);
++		}
++		else if(cur_sig >= 5 && cur_sig <= 20)
++		{
++			ret_sig = 42 + (((cur_sig - 5) * 2) / 3);
++		}
++		else if(cur_sig == 4)
++		{
++			ret_sig = 36;
++		}
++		else if(cur_sig == 3)
++		{
++			ret_sig = 27;
++		}
++		else if(cur_sig == 2)
++		{
++			ret_sig = 18;
++		}
++		else if(cur_sig == 1)
++		{
++			ret_sig = 9;
++		}
++		else
++		{
++			ret_sig = cur_sig;
++		}
++	}
++#endif
++
++	return ret_sig;
++}
++
++
++static s32  translate2dbm(u8 signal_strength_idx)
++{
++	s32	signal_power; // in dBm.
++
++
++	// Translate to dBm (x=0.5y-95).
++	signal_power = (s32)((signal_strength_idx + 1) >> 1);
++	signal_power -= 95;
++
++	return signal_power;
++}
++
++static void query_rx_phy_status(union recv_frame *prframe, struct phy_stat *pphy_stat)
++{
++	PHY_STS_OFDM_8192CD_T	*pOfdm_buf;
++	PHY_STS_CCK_8192CD_T	*pCck_buf;
++	u8	i, max_spatial_stream, evm;
++	s8	rx_pwr[4], rx_pwr_all = 0;
++	u8	pwdb_all;
++	u32	rssi,total_rssi=0;
++	u8 	bcck_rate=0, rf_rx_num = 0, cck_highpwr = 0;
++	_adapter				*padapter = prframe->u.hdr.adapter;
++	struct rx_pkt_attrib	*pattrib = &prframe->u.hdr.attrib;
++	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(padapter);
++	struct dm_priv		*pdmpriv = &pHalData->dmpriv;
++	u8	tmp_rxsnr;
++	s8	rx_snrX;
++
++#ifdef CONFIG_HW_ANTENNA_DIVERSITY
++	PHY_RX_DRIVER_INFO_8192CD *pDrvInfo = ((PHY_RX_DRIVER_INFO_8192CD *)pphy_stat);
++	u8 	bant1_sel = (pDrvInfo->ANTSEL == 1)?_TRUE:_FALSE;	
++#endif
++
++	// Record it for next packet processing
++	bcck_rate=(pattrib->mcs_rate<=3? 1:0);
++
++	if(bcck_rate) //CCK
++	{
++		u8 report;
++#ifdef CONFIG_HW_ANTENNA_DIVERSITY		
++		if(bant1_sel == _TRUE)
++			pHalData->CCK_Ant1_Cnt++;
++		else
++			pHalData->CCK_Ant2_Cnt++;
++#endif		
++
++		// CCK Driver info Structure is not the same as OFDM packet.
++		pCck_buf = (PHY_STS_CCK_8192CD_T *)pphy_stat;
++		//Adapter->RxStats.NumQryPhyStatusCCK++;
++
++		//
++		// (1)Hardware does not provide RSSI for CCK
++		// (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive)
++		//
++
++		if(padapter->pwrctrlpriv.rf_pwrstate == rf_on)
++			cck_highpwr = (u8)pHalData->bCckHighPower;
++		else
++			cck_highpwr = _FALSE;
++
++		if(!cck_highpwr)
++		{
++			report = pCck_buf->cck_agc_rpt&0xc0;
++			report = report>>6;
++			switch(report)
++			{
++				// 03312009 modified by cosa
++				// Modify the RF RNA gain value to -40, -20, -2, 14 by Jenyu's suggestion
++				// Note: different RF with the different RNA gain.
++				case 0x3:
++					rx_pwr_all = (-46) - (pCck_buf->cck_agc_rpt & 0x3e);
++					break;
++				case 0x2:
++					rx_pwr_all = (-26) - (pCck_buf->cck_agc_rpt & 0x3e);
++					break;
++				case 0x1:
++					rx_pwr_all = (-12) - (pCck_buf->cck_agc_rpt & 0x3e);
++					break;
++				case 0x0:
++					rx_pwr_all = (16) - (pCck_buf->cck_agc_rpt & 0x3e);
++					break;
++			}
++		}
++		else
++		{
++			report = pCck_buf->cck_agc_rpt & 0x60;
++			report = report>>5;
++			switch(report)
++			{
++				case 0x3:
++					rx_pwr_all = (-46) - ((pCck_buf->cck_agc_rpt & 0x1f)<<1) ;
++					break;
++				case 0x2:
++					rx_pwr_all = (-26)- ((pCck_buf->cck_agc_rpt & 0x1f)<<1);
++					break;
++				case 0x1:
++					rx_pwr_all = (-12) - ((pCck_buf->cck_agc_rpt & 0x1f)<<1) ;
++					break;
++				case 0x0:
++					rx_pwr_all = (16) - ((pCck_buf->cck_agc_rpt & 0x1f)<<1) ;
++					break;
++			}
++		}
++
++		pwdb_all= query_rx_pwr_percentage(rx_pwr_all);
++		if(pHalData->CustomerID == RT_CID_819x_Lenovo)
++		{
++			// CCK gain is smaller than OFDM/MCS gain,
++			// so we add gain diff by experiences, the val is 6
++			pwdb_all+=6;
++			if(pwdb_all > 100)
++				pwdb_all = 100;
++			// modify the offset to make the same gain index with OFDM.
++			if(pwdb_all > 34 && pwdb_all <= 42)
++				pwdb_all -= 2;
++			else if(pwdb_all > 26 && pwdb_all <= 34)
++				pwdb_all -= 6;
++			else if(pwdb_all > 14 && pwdb_all <= 26)
++				pwdb_all -= 8;
++			else if(pwdb_all > 4 && pwdb_all <= 14)
++				pwdb_all -= 4;
++		}
++
++		pattrib->RxPWDBAll = pwdb_all;	//for DIG/rate adaptive
++		pattrib->RecvSignalPower = rx_pwr_all;	//dBM
++		padapter->recvpriv.rxpwdb = rx_pwr_all;
++		//
++		// (3) Get Signal Quality (EVM)
++		//
++		//if(bPacketMatchBSSID)
++		{
++			u8	sq;
++
++			if(pHalData->CustomerID == RT_CID_819x_Lenovo)
++			{
++				// mapping to 5 bars for vista signal strength
++				// signal quality in driver will be displayed to signal strength
++				// in vista.
++				if(pwdb_all >= 50)
++					sq = 100;
++				else if(pwdb_all >= 35 && pwdb_all < 50)
++					sq = 80;
++				else if(pwdb_all >= 22 && pwdb_all < 35)
++					sq = 60;
++				else if(pwdb_all >= 18 && pwdb_all < 22)
++					sq = 40;
++				else
++					sq = 20;
++			}
++			else
++			{
++				if(pwdb_all> 40)
++				{
++					sq = 100;
++				}
++				else
++				{
++					sq = pCck_buf->SQ_rpt;
++
++					if(pCck_buf->SQ_rpt > 64)
++						sq = 0;
++					else if (pCck_buf->SQ_rpt < 20)
++						sq= 100;
++					else
++						sq = ((64-sq) * 100) / 44;
++
++				}
++			}
++
++			pattrib->signal_qual=sq;
++			pattrib->rx_mimo_signal_qual[0]=sq;
++			pattrib->rx_mimo_signal_qual[1]=(-1);
++		}
++
++	}
++	else //OFDM/HT
++	{
++#ifdef CONFIG_HW_ANTENNA_DIVERSITY	
++		if(bant1_sel == _TRUE)
++			pHalData->OFDM_Ant1_Cnt++;
++		else
++			pHalData->OFDM_Ant2_Cnt++;
++#endif
++		pdmpriv->OFDM_Pkt_Cnt++;
++
++		pOfdm_buf = (PHY_STS_OFDM_8192CD_T *)pphy_stat;
++	
++		//
++		// (1)Get RSSI per-path
++		//
++		for(i=0; i<pHalData->NumTotalRFPath; i++)
++		{
++			// 2008/01/30 MH we will judge RF RX path now.
++			if (pHalData->bRFPathRxEnable[i])
++				rf_rx_num++;
++			//else
++				//continue;
++
++			rx_pwr[i] =  ((pOfdm_buf->trsw_gain_X[i]&0x3F)*2) - 110;
++			padapter->recvpriv.RxRssi[i] = rx_pwr[i];
++			/* Translate DBM to percentage. */
++			pattrib->rx_rssi[i] = rssi = query_rx_pwr_percentage(rx_pwr[i]);
++			total_rssi += rssi;
++
++			RT_TRACE(_module_rtl871x_recv_c_, _drv_err_, ("RF-%d RXPWR=%x RSSI=%d\n", i, rx_pwr[i], rssi));
++
++			//Get Rx snr value in DB
++			tmp_rxsnr =	pOfdm_buf->rxsnr_X[i];
++			rx_snrX = (s8)(tmp_rxsnr);
++			rx_snrX >>= 1;
++			padapter->recvpriv.RxSNRdB[i] =  (int)rx_snrX;
++			pattrib->rx_snr[i]=pOfdm_buf->rxsnr_X[i];
++			/* Record Signal Strength for next packet */
++			//if(bPacketMatchBSSID)
++			{
++				//pRfd->Status.RxMIMOSignalStrength[i] =(u1Byte) RSSI;
++
++				//The following is for lenovo signal strength in vista
++				if(pHalData->CustomerID == RT_CID_819x_Lenovo)
++				{
++					u8	sq;
++
++					if(i == 0)
++					{
++						// mapping to 5 bars for vista signal strength
++						// signal quality in driver will be displayed to signal strength
++						// in vista.
++						if(rssi >= 50)
++							sq = 100;
++						else if(rssi >= 35 && rssi < 50)
++							sq = 80;
++						else if(rssi >= 22 && rssi < 35)
++							sq = 60;
++						else if(rssi >= 18 && rssi < 22)
++							sq = 40;
++						else
++							sq = 20;
++						//DbgPrint("ofdm/mcs RSSI=%d\n", RSSI);
++						//pRfd->Status.SignalQuality = SQ;
++						//DbgPrint("ofdm/mcs SQ = %d\n", pRfd->Status.SignalQuality);
++					}
++				}
++			}
++		}
++
++
++		//
++		// (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive),average
++		//
++		rx_pwr_all = (((pOfdm_buf->pwdb_all ) >> 1 )& 0x7f) -110;//for OFDM Average RSSI
++		pwdb_all = query_rx_pwr_percentage(rx_pwr_all);
++
++		RT_TRACE(_module_rtl871x_recv_c_, _drv_err_, ("PWDB_ALL=%d\n",	pwdb_all));
++
++		pattrib->RxPWDBAll = pwdb_all;	//for DIG/rate adaptive
++		pattrib->RecvSignalPower = rx_pwr_all;//dBM
++		padapter->recvpriv.rxpwdb = rx_pwr_all;
++		//
++		// (3)EVM of HT rate
++		//
++		if(pHalData->CustomerID != RT_CID_819x_Lenovo)
++		{
++			if(pattrib->rxht &&  pattrib->mcs_rate >=20 && pattrib->mcs_rate<=27)
++				max_spatial_stream = 2; //both spatial stream make sense
++			else
++				max_spatial_stream = 1; //only spatial stream 1 makes sense
++
++			for(i=0; i<max_spatial_stream; i++)
++			{
++				// Do not use shift operation like "rx_evmX >>= 1" because the compilor of free build environment
++				// fill most significant bit to "zero" when doing shifting operation which may change a negative
++				// value to positive one, then the dbm value (which is supposed to be negative)  is not correct anymore.
++				evm = evm_db2percentage( (pOfdm_buf->rxevm_X[i]/*/ 2*/));//dbm
++
++				RT_TRACE(_module_rtl871x_recv_c_, _drv_err_, ("RXRATE=%x RXEVM=%x EVM=%s%d\n",
++					pattrib->mcs_rate, pOfdm_buf->rxevm_X[i], "%",evm));
++
++				//if(bPacketMatchBSSID)
++				{
++					if(i==0) // Fill value in RFD, Get the first spatial stream only
++					{
++						pattrib->signal_qual = (u8)(evm & 0xff);
++					}
++					pattrib->rx_mimo_signal_qual[i] = (u8)(evm & 0xff);
++				}
++			}
++
++		}
++
++		//
++		// 4. Record rx statistics for debug
++		//
++
++	}
++
++
++	//UI BSS List signal strength(in percentage), make it good looking, from 0~100.
++	//It is assigned to the BSS List in GetValueFromBeaconOrProbeRsp().
++	if(bcck_rate)
++	{
++		pattrib->signal_strength=(u8)signal_scale_mapping(padapter, pwdb_all);
++	}
++	else
++	{
++		if (rf_rx_num != 0)
++		{
++			pattrib->signal_strength= (u8)(signal_scale_mapping(padapter, total_rssi/=rf_rx_num));
++		}
++	}
++	//DBG_8192C("%s,rx_pwr_all(%d),RxPWDBAll(%d)\n",__FUNCTION__,rx_pwr_all,pattrib->RxPWDBAll);
++
++}
++
++
++static void process_rssi(_adapter *padapter,union recv_frame *prframe)
++{
++	u32	last_rssi, tmp_val;
++	struct rx_pkt_attrib *pattrib = &prframe->u.hdr.attrib;
++#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS
++	struct signal_stat * signal_stat = &padapter->recvpriv.signal_strength_data;
++#endif //CONFIG_NEW_SIGNAL_STAT_PROCESS
++
++	//DBG_8192C("process_rssi=> pattrib->rssil(%d) signal_strength(%d)\n ",pattrib->RecvSignalPower,pattrib->signal_strength);
++	//if(pRfd->Status.bPacketToSelf || pRfd->Status.bPacketBeacon)
++	{
++	
++	#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS
++		if(signal_stat->update_req) {
++			signal_stat->total_num = 0;
++			signal_stat->total_val = 0;
++			signal_stat->update_req = 0;
++		}
++
++		signal_stat->total_num++;
++		signal_stat->total_val  += pattrib->signal_strength;
++		signal_stat->avg_val = signal_stat->total_val / signal_stat->total_num;		
++	#else //CONFIG_NEW_SIGNAL_STAT_PROCESS
++	
++		//Adapter->RxStats.RssiCalculateCnt++;	//For antenna Test
++		if(padapter->recvpriv.signal_strength_data.total_num++ >= PHY_RSSI_SLID_WIN_MAX)
++		{
++			padapter->recvpriv.signal_strength_data.total_num = PHY_RSSI_SLID_WIN_MAX;
++			last_rssi = padapter->recvpriv.signal_strength_data.elements[padapter->recvpriv.signal_strength_data.index];
++			padapter->recvpriv.signal_strength_data.total_val -= last_rssi;
++		}
++		padapter->recvpriv.signal_strength_data.total_val  +=pattrib->signal_strength;
++
++		padapter->recvpriv.signal_strength_data.elements[padapter->recvpriv.signal_strength_data.index++] = pattrib->signal_strength;
++		if(padapter->recvpriv.signal_strength_data.index >= PHY_RSSI_SLID_WIN_MAX)
++			padapter->recvpriv.signal_strength_data.index = 0;
++
++
++		tmp_val = padapter->recvpriv.signal_strength_data.total_val/padapter->recvpriv.signal_strength_data.total_num;
++		
++		if(padapter->recvpriv.is_signal_dbg) {
++			padapter->recvpriv.signal_strength= padapter->recvpriv.signal_strength_dbg;
++			padapter->recvpriv.rssi=(s8)translate2dbm((u8)padapter->recvpriv.signal_strength_dbg);
++		} else {
++			padapter->recvpriv.signal_strength= tmp_val;
++			padapter->recvpriv.rssi=(s8)translate2dbm((u8)tmp_val);
++		}
++
++		RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("UI RSSI = %d, ui_rssi.TotalVal = %d, ui_rssi.TotalNum = %d\n", tmp_val, padapter->recvpriv.signal_strength_data.total_val,padapter->recvpriv.signal_strength_data.total_num));
++	#endif //CONFIG_NEW_SIGNAL_STAT_PROCESS
++	}
++
++}// Process_UI_RSSI_8192C
++
++
++static void process_PWDB(_adapter *padapter, union recv_frame *prframe)
++{
++	int	UndecoratedSmoothedPWDB;
++	int	UndecoratedSmoothedCCK;
++	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(padapter);
++	struct dm_priv		*pdmpriv = &pHalData->dmpriv;
++	struct rx_pkt_attrib	*pattrib= &prframe->u.hdr.attrib;
++	struct sta_info		*psta = prframe->u.hdr.psta;
++	u8 isCCKrate=(pattrib->mcs_rate<=3? 1:0);
++
++
++	if(psta)
++	{
++		UndecoratedSmoothedPWDB = psta->rssi_stat.UndecoratedSmoothedPWDB;
++		UndecoratedSmoothedCCK = psta->rssi_stat.UndecoratedSmoothedCCK;
++	}
++	else
++	{
++		UndecoratedSmoothedPWDB = pdmpriv->UndecoratedSmoothedPWDB;
++		UndecoratedSmoothedCCK = pdmpriv->UndecoratedSmoothedCCK;
++	}
++
++	//if(pRfd->Status.bPacketToSelf || pRfd->Status.bPacketBeacon)
++
++	if(!isCCKrate)
++	{
++		// Process OFDM RSSI
++		if(UndecoratedSmoothedPWDB < 0) // initialize
++		{
++			UndecoratedSmoothedPWDB = pattrib->RxPWDBAll;
++		}
++
++		if(pattrib->RxPWDBAll > (u32)UndecoratedSmoothedPWDB)
++		{
++			UndecoratedSmoothedPWDB =
++					( ((UndecoratedSmoothedPWDB)*(Rx_Smooth_Factor-1)) +
++					(pattrib->RxPWDBAll)) /(Rx_Smooth_Factor);
++
++			UndecoratedSmoothedPWDB = UndecoratedSmoothedPWDB + 1;
++		}
++		else
++		{
++			UndecoratedSmoothedPWDB =
++					( ((UndecoratedSmoothedPWDB)*(Rx_Smooth_Factor-1)) +
++					(pattrib->RxPWDBAll)) /(Rx_Smooth_Factor);
++		}
++	}
++	else
++	{
++		// Process CCK RSSI
++		if(UndecoratedSmoothedCCK < 0) // initialize
++		{
++			UndecoratedSmoothedCCK = pattrib->RxPWDBAll;
++		}
++
++		if(pattrib->RxPWDBAll > (u32)UndecoratedSmoothedCCK)
++		{
++			UndecoratedSmoothedCCK =
++					( ((UndecoratedSmoothedCCK)*(Rx_Smooth_Factor-1)) +
++					(pattrib->RxPWDBAll)) /(Rx_Smooth_Factor);
++
++			UndecoratedSmoothedCCK = UndecoratedSmoothedCCK + 1;
++		}
++		else
++		{
++			UndecoratedSmoothedCCK =
++					( ((UndecoratedSmoothedCCK)*(Rx_Smooth_Factor-1)) +
++					(pattrib->RxPWDBAll)) /(Rx_Smooth_Factor);
++		}
++	}
++	
++	
++	if(psta)
++	{
++		//psta->UndecoratedSmoothedPWDB = UndecoratedSmoothedPWDB;//todo:
++		pdmpriv->UndecoratedSmoothedPWDB = UndecoratedSmoothedPWDB;
++
++		if(pdmpriv->RSSI_Select == RSSI_OFDM){
++			psta->rssi_stat.UndecoratedSmoothedPWDB = UndecoratedSmoothedPWDB;
++		}
++		else if(pdmpriv->RSSI_Select == RSSI_CCK){
++			psta->rssi_stat.UndecoratedSmoothedPWDB = UndecoratedSmoothedCCK;
++		}
++		else{
++			if(UndecoratedSmoothedPWDB <0 ) 
++				pdmpriv->UndecoratedSmoothedPWDB = UndecoratedSmoothedCCK;
++			else
++				pdmpriv->UndecoratedSmoothedPWDB = UndecoratedSmoothedPWDB;
++		}
++		psta->rssi_stat.UndecoratedSmoothedCCK = UndecoratedSmoothedCCK;
++	}
++	else
++	{
++		//pdmpriv->UndecoratedSmoothedPWDB = UndecoratedSmoothedPWDB;
++
++		if(pdmpriv->RSSI_Select == RSSI_OFDM){
++			pdmpriv->UndecoratedSmoothedPWDB = UndecoratedSmoothedPWDB;
++		}
++		else if(pdmpriv->RSSI_Select == RSSI_CCK){
++			pdmpriv->UndecoratedSmoothedPWDB = UndecoratedSmoothedCCK;
++		}
++		else	{
++			if(UndecoratedSmoothedPWDB <0 ) 
++				pdmpriv->UndecoratedSmoothedPWDB = UndecoratedSmoothedCCK;
++			else
++				pdmpriv->UndecoratedSmoothedPWDB = UndecoratedSmoothedPWDB;
++			
++		}
++		pdmpriv->UndecoratedSmoothedCCK = UndecoratedSmoothedCCK;
++	}
++
++	//UpdateRxSignalStatistics8192C(padapter, prframe);
++
++}
++
++
++static void process_link_qual(_adapter *padapter,union recv_frame *prframe)
++{
++	u32	last_evm=0, tmpVal;
++ 	struct rx_pkt_attrib *pattrib;
++#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS
++	struct signal_stat * signal_stat;
++#endif //CONFIG_NEW_SIGNAL_STAT_PROCESS
++
++	if(prframe == NULL || padapter==NULL){
++		return;
++	}
++
++	pattrib = &prframe->u.hdr.attrib;
++#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS
++	signal_stat = &padapter->recvpriv.signal_qual_data;
++#endif //CONFIG_NEW_SIGNAL_STAT_PROCESS
++
++	//DBG_8192C("process_link_qual=> pattrib->signal_qual(%d)\n ",pattrib->signal_qual);
++
++#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS
++	if(signal_stat->update_req) {
++		signal_stat->total_num = 0;
++		signal_stat->total_val = 0;
++		signal_stat->update_req = 0;
++	}
++
++	signal_stat->total_num++;
++	signal_stat->total_val  += pattrib->signal_qual;
++	signal_stat->avg_val = signal_stat->total_val / signal_stat->total_num;
++	
++#else //CONFIG_NEW_SIGNAL_STAT_PROCESS
++	if(pattrib->signal_qual != 0)
++	{
++			//
++			// 1. Record the general EVM to the sliding window.
++			//
++			if(padapter->recvpriv.signal_qual_data.total_num++ >= PHY_LINKQUALITY_SLID_WIN_MAX)
++			{
++				padapter->recvpriv.signal_qual_data.total_num = PHY_LINKQUALITY_SLID_WIN_MAX;
++				last_evm = padapter->recvpriv.signal_qual_data.elements[padapter->recvpriv.signal_qual_data.index];
++				padapter->recvpriv.signal_qual_data.total_val -= last_evm;
++			}
++			padapter->recvpriv.signal_qual_data.total_val += pattrib->signal_qual;
++
++			padapter->recvpriv.signal_qual_data.elements[padapter->recvpriv.signal_qual_data.index++] = pattrib->signal_qual;
++			if(padapter->recvpriv.signal_qual_data.index >= PHY_LINKQUALITY_SLID_WIN_MAX)
++				padapter->recvpriv.signal_qual_data.index = 0;
++
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("Total SQ=%d  pattrib->signal_qual= %d\n", padapter->recvpriv.signal_qual_data.total_val, pattrib->signal_qual));
++
++			// <1> Showed on UI for user, in percentage.
++			tmpVal = padapter->recvpriv.signal_qual_data.total_val/padapter->recvpriv.signal_qual_data.total_num;
++			padapter->recvpriv.signal_qual=(u8)tmpVal;
++
++	}
++	else
++	{
++		RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,(" pattrib->signal_qual =%d\n", pattrib->signal_qual));
++	}
++#endif //CONFIG_NEW_SIGNAL_STAT_PROCESS
++
++}// Process_UiLinkQuality8192S
++
++
++static void process_phy_info(_adapter *padapter, union recv_frame *prframe)
++{
++	union recv_frame *precvframe = (union recv_frame *)prframe;
++
++#ifdef CONFIG_SW_ANTENNA_DIVERSITY
++	// If we switch to the antenna for testing, the signal strength 
++	// of the packets in this time shall not be counted into total receiving power. 
++	// This prevents error counting Rx signal strength and affecting other dynamic mechanism.
++
++	// Select the packets to do RSSI checking for antenna switching.
++	SwAntDivRSSICheck8192C(padapter, precvframe->u.hdr.attrib.RxPWDBAll);
++
++	if(GET_HAL_DATA(padapter)->RSSI_test == _TRUE)
++		return;
++#endif
++	//
++	// Check RSSI
++	//
++	process_rssi(padapter, precvframe);
++	//
++	// Check PWDB.
++	//
++	process_PWDB(padapter, precvframe); 
++	//
++	// Check EVM
++	//
++	process_link_qual(padapter,  precvframe);
++
++}
++
++
++void rtl8192c_translate_rx_signal_stuff(union recv_frame *precvframe, struct phy_stat *pphy_info)
++{
++	struct rx_pkt_attrib	*pattrib = &precvframe->u.hdr.attrib;
++	_adapter				*padapter = precvframe->u.hdr.adapter;
++	u8	bPacketMatchBSSID =_FALSE;
++	u8	bPacketToSelf = _FALSE;
++	u8	bPacketBeacon = _FALSE;
++
++	if((pattrib->physt) && (pphy_info != NULL))
++	{
++		bPacketMatchBSSID = ((!IsFrameTypeCtrl(precvframe->u.hdr.rx_data)) && !(pattrib->icv_err) && !(pattrib->crc_err) &&
++			_rtw_memcmp(get_hdr_bssid(precvframe->u.hdr.rx_data), get_my_bssid(&padapter->mlmeextpriv.mlmext_info.network), ETH_ALEN));
++			
++
++		bPacketToSelf = bPacketMatchBSSID &&  (_rtw_memcmp(get_da(precvframe->u.hdr.rx_data), myid(&padapter->eeprompriv), ETH_ALEN));
++
++		bPacketBeacon =bPacketMatchBSSID && (GetFrameSubType(precvframe->u.hdr.rx_data) ==  WIFI_BEACON);
++
++		query_rx_phy_status(precvframe, pphy_info);
++
++		precvframe->u.hdr.psta = NULL;
++		if(bPacketMatchBSSID && check_fwstate(&padapter->mlmepriv, WIFI_AP_STATE) == _TRUE)
++		{
++			u8 *sa;
++			struct sta_info *psta=NULL;
++			struct sta_priv *pstapriv = &padapter->stapriv;
++			
++			sa = get_sa(precvframe->u.hdr.rx_data);
++
++			psta = rtw_get_stainfo(pstapriv, sa);
++			if(psta)
++			{
++				precvframe->u.hdr.psta = psta;
++				process_phy_info(padapter, precvframe);
++			}
++		}
++		else if(bPacketToSelf || bPacketBeacon)
++		{
++			if(check_fwstate(&padapter->mlmepriv, WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE) == _TRUE)
++			{
++				u8 *sa;
++				struct sta_info *psta=NULL;
++				struct sta_priv *pstapriv = &padapter->stapriv;
++			
++				sa = get_sa(precvframe->u.hdr.rx_data);
++
++				psta = rtw_get_stainfo(pstapriv, sa);
++				if(psta)
++				{
++					precvframe->u.hdr.psta = psta;
++				}				
++			}
++					
++			process_phy_info(padapter, precvframe);
++		}
++	}
++}
++
++void rtl8192c_query_rx_desc_status(union recv_frame *precvframe, struct recv_stat *pdesc)
++{
++	struct rx_pkt_attrib	*pattrib = &precvframe->u.hdr.attrib;
++
++	//Offset 0
++	pattrib->physt = (u8)((le32_to_cpu(pdesc->rxdw0) >> 26) & 0x1);
++	pattrib->pkt_len =  (u16)(le32_to_cpu(pdesc->rxdw0)&0x00003fff);
++	pattrib->drvinfo_sz = (u8)((le32_to_cpu(pdesc->rxdw0) >> 16) & 0xf) * 8;//uint 2^3 = 8 bytes
++
++	pattrib->shift_sz = (u8)((le32_to_cpu(pdesc->rxdw0) >> 24) & 0x3);
++
++	pattrib->crc_err = (u8)((le32_to_cpu(pdesc->rxdw0) >> 14) & 0x1);
++	pattrib->icv_err = (u8)((le32_to_cpu(pdesc->rxdw0) >> 15) & 0x1);
++	pattrib->qos = (u8)(( le32_to_cpu( pdesc->rxdw0 ) >> 23) & 0x1);// Qos data, wireless lan header length is 26
++	pattrib->bdecrypted = (le32_to_cpu(pdesc->rxdw0) & BIT(27))? 0:1;
++
++	//Offset 4
++	pattrib->mfrag = (u8)((le32_to_cpu(pdesc->rxdw1) >> 27) & 0x1);//more fragment bit
++
++	//Offset 8
++	pattrib->frag_num = (u8)((le32_to_cpu(pdesc->rxdw2) >> 12) & 0xf);//fragmentation number
++
++	//Offset 12
++#ifdef CONFIG_TCP_CSUM_OFFLOAD_RX
++	if ( le32_to_cpu(pdesc->rxdw3) & BIT(13)){
++		pattrib->tcpchk_valid = 1; // valid
++		if ( le32_to_cpu(pdesc->rxdw3) & BIT(11) ) {
++			pattrib->tcp_chkrpt = 1; // correct
++			//DBG_8192C("tcp csum ok\n");
++		}
++		else
++			pattrib->tcp_chkrpt = 0; // incorrect
++
++		if ( le32_to_cpu(pdesc->rxdw3) & BIT(12) )
++			pattrib->ip_chkrpt = 1; // correct
++		else
++			pattrib->ip_chkrpt = 0; // incorrect
++	}
++	else {
++		pattrib->tcpchk_valid = 0; // invalid
++	}
++#endif
++
++	pattrib->mcs_rate=(u8)((le32_to_cpu(pdesc->rxdw3))&0x3f);
++	pattrib->rxht=(u8)((le32_to_cpu(pdesc->rxdw3) >>6)&0x1);
++	pattrib->sgi=(u8)((le32_to_cpu(pdesc->rxdw3) >>8)&0x1);
++	//Offset 16
++	//Offset 20
++
++}
++
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_sreset.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_sreset.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_sreset.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_sreset.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,94 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#include <rtl8192c_sreset.h>
++#include <rtl8192c_hal.h>
++#ifdef DBG_CONFIG_ERROR_DETECT
++void rtl8192c_sreset_xmit_status_check(_adapter *padapter)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);	
++	struct sreset_priv *psrtpriv = &pHalData->srestpriv;	
++	
++	unsigned long current_time;
++	struct xmit_priv	*pxmitpriv = &padapter->xmitpriv;
++	unsigned int diff_time;
++	u32 txdma_status;
++	if( (txdma_status=rtw_read32(padapter, REG_TXDMA_STATUS)) !=0x00){
++		DBG_871X("%s REG_TXDMA_STATUS:0x%08x\n", __FUNCTION__, txdma_status);
++		rtw_hal_sreset_reset(padapter);						
++	}
++	
++	//total xmit irp = 4
++	//DBG_8192C("==>%s free_xmitbuf_cnt(%d),txirp_cnt(%d)\n",__FUNCTION__,pxmitpriv->free_xmitbuf_cnt,pxmitpriv->txirp_cnt);
++	//if(pxmitpriv->txirp_cnt == NR_XMITBUFF+1)
++	current_time = rtw_get_current_time();
++
++	if(0 == pxmitpriv->free_xmitbuf_cnt || 0 == pxmitpriv->free_xmit_extbuf_cnt) {
++
++		diff_time = rtw_get_passing_time_ms(psrtpriv->last_tx_time);
++
++		if (diff_time > 2000) {
++			if (psrtpriv->last_tx_complete_time == 0) {
++				psrtpriv->last_tx_complete_time = current_time;
++			}
++			else{
++				diff_time = rtw_get_passing_time_ms(psrtpriv->last_tx_complete_time);
++				if (diff_time > 4000) {
++					//padapter->Wifi_Error_Status = WIFI_TX_HANG;
++					DBG_871X("%s tx hang\n", __FUNCTION__);
++					rtw_hal_sreset_reset(padapter);
++				}
++			}
++		}
++	}
++
++	if (psrtpriv->dbg_trigger_point == SRESET_TGP_XMIT_STATUS) {
++		psrtpriv->dbg_trigger_point = SRESET_TGP_NULL;
++		rtw_hal_sreset_reset(padapter);
++		return;
++	}
++}
++void rtl8192c_sreset_linked_status_check(_adapter *padapter)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++	struct sreset_priv *psrtpriv = &pHalData->srestpriv;
++
++	u32 regc50,regc58,reg824,reg800;
++	regc50 = rtw_read32(padapter,0xc50);
++	regc58 = rtw_read32(padapter,0xc58);
++	reg824 = rtw_read32(padapter,0x824);
++	reg800 = rtw_read32(padapter,0x800);	
++	if(	((regc50&0xFFFFFF00)!= 0x69543400)||
++		((regc58&0xFFFFFF00)!= 0x69543400)||
++		(((reg824&0xFFFFFF00)!= 0x00390000)&&(((reg824&0xFFFFFF00)!= 0x80390000)))||
++		( ((reg800&0xFFFFFF00)!= 0x03040000)&&((reg800&0xFFFFFF00)!= 0x83040000)))
++	{
++		DBG_8192C("%s regc50:0x%08x, regc58:0x%08x, reg824:0x%08x, reg800:0x%08x,\n", __FUNCTION__,
++			regc50, regc58, reg824, reg800);
++		rtw_hal_sreset_reset(padapter);	
++	}
++
++	if (psrtpriv->dbg_trigger_point == SRESET_TGP_LINK_STATUS) {
++		psrtpriv->dbg_trigger_point = SRESET_TGP_NULL;
++		rtw_hal_sreset_reset(padapter);
++		return;
++	}
++}
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_xmit.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_xmit.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_xmit.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/rtl8192c_xmit.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,63 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _RTL8192C_XMIT_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <rtl8192c_hal.h>
++
++#ifdef CONFIG_XMIT_ACK
++void dump_txrpt_ccx_8192c(void *buf)
++{
++	struct txrpt_ccx_8192c *txrpt_ccx = buf; 
++
++	DBG_871X("%s:\n"
++		"retry_cnt:%u, rsvd_0:%u, rts_retry_cnt:%u, rsvd_1:%u\n"
++		"ccx_qtime:%u, missed_pkt_num:%u, rsvd_4:%u\n"
++		"mac_id:%u, des1_fragssn:%u\n"
++		"rpt_pkt_num:%u, pkt_drop:%u, lifetime_over:%u, retry_over:%u\n"
++		"edca_tx_queue:%u, rsvd_7:%u, bmc:%u, pkt_ok:%u, init_ccx:%u\n"
++		, __func__
++		, txrpt_ccx->retry_cnt, txrpt_ccx->rsvd_0, txrpt_ccx->rts_retry_cnt, txrpt_ccx->rsvd_1
++		, txrpt_ccx_qtime_8192c(txrpt_ccx), txrpt_ccx->missed_pkt_num, txrpt_ccx->rsvd_4
++		, txrpt_ccx->mac_id, txrpt_ccx->des1_fragssn
++		, txrpt_ccx->rpt_pkt_num, txrpt_ccx->pkt_drop, txrpt_ccx->lifetime_over, txrpt_ccx->retry_over
++		, txrpt_ccx->edca_tx_queue, txrpt_ccx->rsvd_7, txrpt_ccx->bmc, txrpt_ccx->pkt_ok, txrpt_ccx->int_ccx
++	);
++}
++
++void handle_txrpt_ccx_8192c(_adapter *adapter, void *buf)
++{
++	struct txrpt_ccx_8192c *txrpt_ccx = buf; 
++
++	#ifdef DBG_CCX
++	dump_txrpt_ccx_8192c(buf);
++	#endif
++
++	if (txrpt_ccx->int_ccx) {
++		if (txrpt_ccx->pkt_ok)
++			rtw_ack_tx_done(&adapter->xmitpriv, RTW_SCTX_DONE_SUCCESS);
++		else
++			rtw_ack_tx_done(&adapter->xmitpriv, RTW_SCTX_DONE_CCX_PKT_FAIL);
++	}
++}
++#endif //CONFIG_XMIT_ACK
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/Hal8192CUHWImg.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/Hal8192CUHWImg.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/Hal8192CUHWImg.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/Hal8192CUHWImg.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,8758 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++
++/*Created on  2011/ 6/15,  5:45*/
++
++#include <basic_types.h>
++#include "Hal8192CUHWImg.h"
++
++#ifdef CONFIG_BT_COEXISTENCE
++// =================== v84 TSMC COMMON 2012-04-13 =======================
++u8 Rtl8192CUFwTSMCImgArray[TSMCImgArrayLength] = {
++0xc1,0x88,0x02,0x00,0x54,0x00,0x01,0x00,0x04,0x13,0x11,0x07,0x3a,0x3d,0x00,0x00,
++0x58,0x97,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x02,0x43,0xba,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x02,0x50,0xa1,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x02,0x57,0x91,0x00,0x00,0x00,0x00,0x00,0xa1,0xe8,0x00,0x00,0x00,
++0x05,0x04,0x03,0x02,0x00,0x03,0x06,0x05,0x04,0x03,0x00,0x04,0x06,0x05,0x04,0x02,
++0x00,0x04,0x08,0x07,0x06,0x04,0x00,0x06,0x0a,0x09,0x08,0x06,0x00,0x08,0x0a,0x09,
++0x08,0x04,0x00,0x08,0x0a,0x09,0x08,0x02,0x00,0x08,0x0a,0x09,0x08,0x00,0x00,0x08,
++0x12,0x11,0x10,0x08,0x00,0x10,0x1a,0x19,0x18,0x10,0x00,0x18,0x22,0x21,0x20,0x18,
++0x00,0x20,0x22,0x21,0x20,0x10,0x00,0x20,0x22,0x21,0x20,0x08,0x00,0x20,0x22,0x21,
++0x1c,0x08,0x00,0x20,0x22,0x21,0x14,0x08,0x00,0x20,0x22,0x20,0x18,0x08,0x00,0x20,
++0x31,0x30,0x20,0x10,0x00,0x30,0x31,0x30,0x18,0x00,0x00,0x30,0x31,0x2f,0x10,0x10,
++0x00,0x30,0x31,0x2c,0x10,0x10,0x00,0x30,0x31,0x28,0x10,0x00,0x00,0x30,0x31,0x20,
++0x10,0x00,0x00,0x30,0x31,0x10,0x10,0x00,0x00,0x30,0x04,0x04,0x04,0x05,0x04,0x04,
++0x04,0x05,0x05,0x05,0x06,0x06,0x04,0x04,0x04,0x05,0x05,0x05,0x06,0x06,0x04,0x04,
++0x05,0x05,0x05,0x05,0x06,0x06,0x04,0x04,0x05,0x05,0x05,0x05,0x06,0x07,0x0a,0x0b,
++0x0d,0x10,0x04,0x05,0x05,0x06,0x06,0x09,0x0c,0x11,0x08,0x08,0x09,0x09,0x0a,0x0c,
++0x10,0x11,0x04,0x04,0x04,0x05,0x04,0x04,0x05,0x07,0x07,0x07,0x08,0x0a,0x04,0x04,
++0x04,0x04,0x06,0x0a,0x0b,0x0d,0x05,0x05,0x07,0x07,0x08,0x0b,0x0d,0x0f,0x04,0x04,
++0x04,0x05,0x07,0x07,0x09,0x09,0x0c,0x0e,0x10,0x12,0x04,0x04,0x05,0x05,0x06,0x0a,
++0x11,0x13,0x09,0x09,0x09,0x09,0x0c,0x0e,0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x24,0x26,0x2a,0x18,0x1a,0x1d,0x1f,0x21,0x27,0x29,0x2a,0x00,0x00,
++0x00,0x1f,0x23,0x28,0x2a,0x2c,0x00,0x04,0x00,0x04,0x00,0x08,0x00,0x10,0x00,0x18,
++0x00,0x24,0x00,0x30,0x00,0x48,0x00,0x60,0x00,0x90,0x00,0xc0,0x00,0xd8,0x00,0x50,
++0x00,0x78,0x00,0xa0,0x00,0xc8,0x01,0x40,0x01,0x90,0x01,0xe0,0x02,0x30,0x01,0x2c,
++0x01,0x40,0x01,0xe0,0x02,0xd0,0x03,0xe8,0x04,0xb0,0x06,0x40,0x07,0xd0,0x00,0x02,
++0x00,0x02,0x00,0x04,0x00,0x08,0x00,0x0c,0x00,0x12,0x00,0x18,0x00,0x24,0x00,0x30,
++0x00,0x48,0x00,0x60,0x00,0x6c,0x00,0x28,0x00,0x3c,0x00,0x50,0x00,0x64,0x00,0xa0,
++0x00,0xc8,0x00,0xf0,0x01,0x18,0x00,0x64,0x00,0xa0,0x00,0xf0,0x01,0x68,0x01,0xf4,
++0x02,0x58,0x03,0x20,0x03,0xe8,0x02,0x02,0x02,0x02,0x02,0x02,0x03,0x03,0x04,0x04,
++0x05,0x07,0x04,0x04,0x07,0x0a,0x0a,0x0c,0x0c,0x12,0x05,0x07,0x07,0x08,0x0b,0x12,
++0x24,0x3c,0x01,0x01,0x01,0x01,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x01,0x02,
++0x03,0x04,0x05,0x06,0x07,0x08,0x05,0x06,0x07,0x08,0x09,0x0a,0x0b,0x0c,0x20,0x1e,
++0x1c,0x18,0x10,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0xbb,0x01,0x0c,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe0,0x22,0x50,
++0x06,0xe9,0x25,0x82,0xf8,0xe6,0x22,0xbb,0xfe,0x06,0xe9,0x25,0x82,0xf8,0xe2,0x22,
++0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe4,0x93,0x22,0xbb,0x01,0x06,
++0x89,0x82,0x8a,0x83,0xf0,0x22,0x50,0x02,0xf7,0x22,0xbb,0xfe,0x01,0xf3,0x22,0xf8,
++0xbb,0x01,0x0d,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe8,0xf0,0x22,
++0x50,0x06,0xe9,0x25,0x82,0xc8,0xf6,0x22,0xbb,0xfe,0x05,0xe9,0x25,0x82,0xc8,0xf2,
++0x22,0xc5,0xf0,0xf8,0xa3,0xe0,0x28,0xf0,0xc5,0xf0,0xf8,0xe5,0x82,0x15,0x82,0x70,
++0x02,0x15,0x83,0xe0,0x38,0xf0,0x22,0xbb,0x01,0x0a,0x89,0x82,0x8a,0x83,0xe0,0xf5,
++0xf0,0xa3,0xe0,0x22,0x50,0x06,0x87,0xf0,0x09,0xe7,0x19,0x22,0xbb,0xfe,0x07,0xe3,
++0xf5,0xf0,0x09,0xe3,0x19,0x22,0x89,0x82,0x8a,0x83,0xe4,0x93,0xf5,0xf0,0x74,0x01,
++0x93,0x22,0xbb,0x01,0x10,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe0,
++0xf5,0xf0,0xa3,0xe0,0x22,0x50,0x09,0xe9,0x25,0x82,0xf8,0x86,0xf0,0x08,0xe6,0x22,
++0xbb,0xfe,0x0a,0xe9,0x25,0x82,0xf8,0xe2,0xf5,0xf0,0x08,0xe2,0x22,0xe5,0x83,0x2a,
++0xf5,0x83,0xe9,0x93,0xf5,0xf0,0xa3,0xe9,0x93,0x22,0xbb,0x01,0x0a,0x89,0x82,0x8a,
++0x83,0xf0,0xe5,0xf0,0xa3,0xf0,0x22,0x50,0x06,0xf7,0x09,0xa7,0xf0,0x19,0x22,0xbb,
++0xfe,0x06,0xf3,0xe5,0xf0,0x09,0xf3,0x19,0x22,0xf8,0xbb,0x01,0x11,0xe5,0x82,0x29,
++0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe8,0xf0,0xe5,0xf0,0xa3,0xf0,0x22,0x50,0x09,
++0xe9,0x25,0x82,0xc8,0xf6,0x08,0xa6,0xf0,0x22,0xbb,0xfe,0x09,0xe9,0x25,0x82,0xc8,
++0xf2,0xe5,0xf0,0x08,0xf2,0x22,0xef,0x4b,0xff,0xee,0x4a,0xfe,0xed,0x49,0xfd,0xec,
++0x48,0xfc,0x22,0xe0,0xfc,0xa3,0xe0,0xfd,0xa3,0xe0,0xfe,0xa3,0xe0,0xff,0x22,0xa4,
++0x25,0x82,0xf5,0x82,0xe5,0xf0,0x35,0x83,0xf5,0x83,0x22,0xe0,0xfb,0xa3,0xe0,0xfa,
++0xa3,0xe0,0xf9,0x22,0xf8,0xe0,0xfb,0xa3,0xa3,0xe0,0xf9,0x25,0xf0,0xf0,0xe5,0x82,
++0x15,0x82,0x70,0x02,0x15,0x83,0xe0,0xfa,0x38,0xf0,0x22,0xeb,0xf0,0xa3,0xea,0xf0,
++0xa3,0xe9,0xf0,0x22,0xd0,0x83,0xd0,0x82,0xf8,0xe4,0x93,0x70,0x12,0x74,0x01,0x93,
++0x70,0x0d,0xa3,0xa3,0x93,0xf8,0x74,0x01,0x93,0xf5,0x82,0x88,0x83,0xe4,0x73,0x74,
++0x02,0x93,0x68,0x60,0xef,0xa3,0xa3,0xa3,0x80,0xdf,0x02,0x43,0xf8,0x02,0x48,0x29,
++0xe4,0x93,0xa3,0xf8,0xe4,0x93,0xa3,0x40,0x03,0xf6,0x80,0x01,0xf2,0x08,0xdf,0xf4,
++0x80,0x29,0xe4,0x93,0xa3,0xf8,0x54,0x07,0x24,0x0c,0xc8,0xc3,0x33,0xc4,0x54,0x0f,
++0x44,0x20,0xc8,0x83,0x40,0x04,0xf4,0x56,0x80,0x01,0x46,0xf6,0xdf,0xe4,0x80,0x0b,
++0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80,0x90,0x44,0x3d,0xe4,0x7e,0x01,0x93,0x60,
++0xbc,0xa3,0xff,0x54,0x3f,0x30,0xe5,0x09,0x54,0x1f,0xfe,0xe4,0x93,0xa3,0x60,0x01,
++0x0e,0xcf,0x54,0xc0,0x25,0xe0,0x60,0xa8,0x40,0xb8,0xe4,0x93,0xa3,0xfa,0xe4,0x93,
++0xa3,0xf8,0xe4,0x93,0xa3,0xc8,0xc5,0x82,0xc8,0xca,0xc5,0x83,0xca,0xf0,0xa3,0xc8,
++0xc5,0x82,0xc8,0xca,0xc5,0x83,0xca,0xdf,0xe9,0xde,0xe7,0x80,0xbe,0x41,0x9e,0x77,
++0x00,0x41,0x9e,0xae,0x00,0x41,0x9e,0x54,0x80,0x41,0x9e,0xb0,0x00,0x00,0xf0,0x90,
++0x9e,0x5d,0xe0,0x90,0x9e,0x86,0xf0,0xe4,0xfb,0xfd,0x7f,0x54,0x7e,0x01,0xd3,0x10,
++0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x85,0xe0,0xfb,0xa3,0xe0,0xf5,0x44,0xe4,0xf5,
++0x45,0x12,0x35,0xab,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x01,0x5f,0xe4,0xf0,0x90,0x01,
++0x3c,0x74,0x08,0xf0,0xe4,0x90,0x9e,0x85,0xf0,0x90,0x9e,0x5b,0xe0,0x90,0x9e,0x86,
++0xf0,0xe4,0xfb,0xfd,0x7f,0x5c,0x7e,0x01,0x91,0x5e,0x90,0x01,0x5f,0x74,0x05,0xf0,
++0x90,0x06,0x92,0x74,0x02,0xf0,0x90,0x9e,0x63,0x14,0xf0,0xe5,0x61,0x54,0x0f,0xc3,
++0x94,0x0c,0x50,0x03,0x12,0x54,0xe3,0x22,0x8f,0x82,0x8e,0x83,0xa3,0xa3,0xa3,0xe4,
++0xf0,0x22,0xe4,0xf5,0x65,0x7f,0x60,0x7e,0x01,0x80,0xed,0x7d,0x01,0xaf,0x62,0x02,
++0x54,0xe7,0xb1,0xb0,0xbf,0x01,0x12,0x90,0x9e,0x79,0xe0,0xff,0xe4,0xfd,0xf1,0x79,
++0x12,0x5f,0xf7,0x90,0x04,0x1f,0x74,0x20,0xf0,0x22,0xb1,0xb0,0xbf,0x01,0x0f,0x90,
++0x02,0x09,0xe0,0xff,0x7d,0x01,0xf1,0x79,0x90,0x04,0x1f,0x74,0x20,0xf0,0x22,0x22,
++0x22,0x22,0x00,0x02,0x45,0x03,0x02,0x45,0x06,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,
++0x8b,0x20,0x8a,0x21,0x89,0x22,0x90,0x9e,0x87,0x71,0x8b,0xab,0x23,0xaa,0x24,0xa9,
++0x25,0x90,0x9e,0x8a,0x71,0x8b,0xaf,0x26,0x15,0x26,0xef,0x60,0x1b,0x90,0x9e,0x8a,
++0xe4,0x75,0xf0,0x01,0x71,0x74,0x12,0x29,0xd9,0xff,0x90,0x9e,0x87,0xe4,0x75,0xf0,
++0x01,0x71,0x74,0xef,0x51,0x4d,0x80,0xde,0xab,0x20,0xaa,0x21,0xa9,0x22,0xd0,0xd0,
++0x92,0xaf,0x22,0x90,0x9e,0x11,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0x90,0x06,0xa9,
++0xe0,0x90,0x9e,0x10,0xf0,0xe0,0x54,0xc0,0x70,0x08,0x53,0x64,0xfe,0x53,0x64,0xfd,
++0x91,0xcb,0x90,0x9e,0x10,0xe0,0x30,0xe6,0x13,0x43,0x64,0x01,0x90,0x9e,0x66,0xe0,
++0x64,0x02,0x60,0x04,0x91,0xd2,0x80,0x07,0x91,0x79,0x80,0x03,0x53,0x64,0xfe,0x90,
++0x9e,0x10,0xe0,0x30,0xe7,0x16,0x43,0x64,0x02,0xe4,0x90,0x9e,0x85,0x91,0x4e,0x90,
++0x01,0x57,0x74,0x05,0xf0,0x90,0x9e,0x67,0x74,0x01,0xf0,0x22,0x53,0x64,0xfd,0x22,
++0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x01,0xc4,0x74,0xb0,0xf0,0x74,0x45,0xa3,
++0xf0,0x90,0x04,0x1d,0xe0,0x60,0x1a,0x90,0x05,0x22,0xe0,0x54,0x90,0x60,0x07,0x90,
++0x01,0xc6,0xe0,0x44,0x40,0xf0,0x90,0x01,0xc7,0xe0,0x30,0xe1,0xe4,0x7f,0x00,0x80,
++0x02,0x7f,0x01,0xd0,0xd0,0x92,0xaf,0x22,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0,0x82,
++0xc0,0xd0,0x75,0xd0,0x00,0xc0,0x00,0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,
++0x05,0xc0,0x06,0xc0,0x07,0x75,0x13,0x00,0x90,0x01,0xc4,0x74,0xe8,0xf0,0x74,0x45,
++0xa3,0xf0,0x53,0x91,0xdf,0x90,0x01,0x3c,0xe0,0x55,0x30,0xf5,0x34,0xa3,0xe0,0x55,
++0x31,0xf5,0x35,0xa3,0xe0,0x55,0x32,0xf5,0x36,0xa3,0xe0,0x55,0x33,0xf5,0x37,0xe5,
++0x34,0x30,0xe0,0x06,0x90,0x01,0x3c,0x74,0x01,0xf0,0xe5,0x34,0x30,0xe1,0x09,0x90,
++0x01,0x3c,0x74,0x02,0xf0,0x12,0x61,0xc9,0xe5,0x34,0x30,0xe2,0x38,0x90,0x01,0x3c,
++0x74,0x04,0xf0,0x90,0x06,0x92,0xe0,0x30,0xe0,0x24,0x90,0x9e,0x85,0xe4,0xf0,0x90,
++0x9e,0x5b,0xe0,0x90,0x9e,0x86,0xf0,0xe4,0xfb,0xfd,0x7f,0x58,0x7e,0x01,0x91,0x5e,
++0x90,0x01,0x5b,0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x01,0xf0,0x80,0x07,0x90,0x9e,
++0x64,0xe4,0xf0,0x91,0xcb,0xe5,0x34,0x30,0xe3,0x38,0x90,0x01,0x3c,0x74,0x08,0xf0,
++0x90,0x06,0x92,0xe0,0x30,0xe1,0x24,0x90,0x9e,0x85,0xe4,0xf0,0x90,0x9e,0x5b,0xe0,
++0x90,0x9e,0x86,0xf0,0xe4,0xfb,0xfd,0x7f,0x5c,0x7e,0x01,0x91,0x5e,0x90,0x01,0x5f,
++0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x02,0xf0,0x80,0x07,0x90,0x9e,0x63,0xe4,0xf0,
++0x91,0xcb,0xe5,0x34,0x30,0xe4,0x09,0x90,0x01,0x3c,0x74,0x10,0xf0,0x12,0x4b,0xfb,
++0xe5,0x34,0x30,0xe5,0x09,0x90,0x01,0x3c,0x74,0x20,0xf0,0x12,0x4c,0x3d,0xe5,0x35,
++0x30,0xe0,0x44,0x90,0x01,0x3d,0x74,0x01,0xf0,0x90,0x01,0x2f,0xe0,0x44,0x7f,0xf0,
++0x90,0x00,0x83,0xe0,0x54,0x0f,0xf5,0x13,0xb4,0x01,0x02,0x80,0x1c,0xe5,0x13,0xb4,
++0x02,0x05,0x90,0x00,0x83,0x80,0x12,0xe5,0x13,0xb4,0x04,0x05,0x90,0x00,0x83,0x80,
++0x08,0xe5,0x13,0xb4,0x0c,0x06,0x90,0x00,0x83,0xe0,0xf5,0x62,0x90,0x01,0xbb,0xe5,
++0x62,0xf0,0x12,0x60,0xc0,0x91,0xcb,0xe5,0x35,0x30,0xe2,0x06,0x90,0x01,0x3d,0x74,
++0x04,0xf0,0xe5,0x35,0x30,0xe4,0x06,0x90,0x01,0x3d,0x74,0x10,0xf0,0xe5,0x36,0x30,
++0xe0,0x06,0x90,0x01,0x3e,0x74,0x01,0xf0,0xe5,0x36,0x30,0xe1,0x06,0x90,0x01,0x3e,
++0x74,0x02,0xf0,0x74,0xe8,0x04,0x90,0x01,0xc4,0xf0,0x74,0x45,0xa3,0xf0,0xd0,0x07,
++0xd0,0x06,0xd0,0x05,0xd0,0x04,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,
++0xd0,0x82,0xd0,0x83,0xd0,0xf0,0xd0,0xe0,0x32,0x90,0x9e,0x98,0xef,0xf0,0xa3,0xed,
++0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xe5,0x63,0x60,0x05,0xe4,0xff,0x12,0x54,0x97,0x90,
++0x9e,0x98,0xe0,0x30,0xe0,0x09,0x90,0x9e,0x9a,0xe4,0xf0,0xa3,0x74,0x80,0xf0,0x90,
++0x9e,0x98,0xe0,0xff,0xc3,0x13,0x90,0xfd,0x10,0xf0,0x90,0x04,0x25,0xef,0xf0,0x90,
++0x9e,0x99,0xe0,0x60,0x1f,0xa3,0xa3,0xe0,0xff,0x24,0x0f,0xf5,0x82,0xe4,0x34,0xfc,
++0xf5,0x83,0xe0,0x44,0x80,0xf0,0x74,0x10,0x2f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,
++0xe0,0x44,0x80,0xf0,0x90,0x9e,0x9a,0xa3,0xe0,0xff,0xfd,0x24,0x08,0xf5,0x82,0xe4,
++0x34,0xfc,0xf5,0x83,0xe4,0xf0,0x74,0x09,0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,
++0xe0,0x54,0xf0,0xf0,0x74,0x21,0x2f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,
++0xf7,0xf0,0x90,0x9e,0x9a,0xe0,0xfe,0xa3,0xe0,0xff,0x22,0x75,0x28,0x33,0xe4,0xf5,
++0x29,0x75,0x2a,0x07,0xf5,0x2b,0x90,0x01,0x30,0xe5,0x28,0xf0,0xa3,0xe5,0x29,0xf0,
++0xa3,0xe5,0x2a,0xf0,0xa3,0xe5,0x2b,0xf0,0x22,0xe4,0x90,0x9e,0x16,0xf0,0xa3,0xf0,
++0x75,0x8e,0x02,0xf1,0xa1,0xf1,0xe9,0x90,0x9e,0x7e,0xef,0xf0,0xf1,0xdd,0x90,0x9e,
++0x80,0xef,0xf0,0xf1,0xf6,0x90,0x9e,0x75,0xee,0xf0,0xa3,0xef,0xf0,0xe4,0xf5,0x57,
++0x12,0x6e,0x77,0xf1,0xd4,0x12,0x60,0x4b,0x12,0x32,0x3d,0xf1,0xc9,0x11,0x0b,0x12,
++0x50,0x0e,0xf1,0xcd,0xf1,0xb1,0x12,0x44,0xff,0xf1,0x45,0x90,0x9e,0x18,0xe5,0xd9,
++0xf0,0x11,0xd0,0xc2,0xaf,0x90,0x00,0x80,0xe0,0x44,0x40,0xf0,0xb1,0x45,0x75,0xe8,
++0x03,0x43,0xa8,0x85,0xd2,0xaf,0x90,0x9e,0x16,0xe0,0x64,0x01,0xf0,0x24,0x29,0x90,
++0x01,0xc4,0xf0,0x74,0x48,0xa3,0xf0,0xe5,0x57,0x30,0xe4,0x0a,0xc2,0xaf,0x53,0x57,
++0xef,0xd2,0xaf,0x12,0x58,0x74,0xe5,0x57,0x30,0xe6,0x17,0xc2,0xaf,0x53,0x57,0xbf,
++0xd2,0xaf,0x12,0x67,0xa1,0x90,0x9e,0x43,0xe0,0xff,0x60,0x03,0xb4,0x01,0x03,0x12,
++0x7b,0x5c,0x90,0x9e,0x43,0xe0,0x70,0x03,0x12,0x7c,0x5f,0x12,0x73,0x85,0x80,0xb6,
++0x90,0x01,0x3c,0x74,0xff,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x01,0x34,0xf0,0xa3,0xf0,
++0xa3,0xf0,0xa3,0xf0,0xfd,0x7f,0x54,0x31,0x05,0x7d,0xff,0x7f,0x55,0x31,0x05,0x7d,
++0xff,0x7f,0x56,0x31,0x05,0x7d,0xff,0x7f,0x57,0x80,0x0a,0xf0,0x90,0x00,0x45,0xe0,
++0x54,0xfe,0xfd,0x7f,0x45,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x8f,0x82,0x75,0x83,
++0x00,0xed,0xf0,0xb1,0x45,0xd0,0xd0,0x92,0xaf,0x22,0xef,0x14,0x60,0x30,0x14,0x60,
++0x66,0x24,0x02,0x60,0x02,0x21,0xc1,0x90,0x9e,0x3f,0x74,0x02,0xf0,0x90,0x00,0x48,
++0xe0,0x44,0x0c,0xfd,0x7f,0x48,0x31,0x05,0x90,0x00,0x47,0xe0,0x44,0x08,0xfd,0x7f,
++0x47,0x31,0x05,0x90,0x00,0x45,0xe0,0x44,0x10,0xfd,0x7f,0x45,0x80,0x71,0xe4,0x90,
++0x9e,0x3f,0xf0,0x90,0x9e,0x3b,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,
++0x80,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x00,0x45,0xe0,0x44,0xef,0xfd,0x7f,0x45,0x31,
++0x05,0x90,0x00,0x45,0xe0,0x54,0xef,0xfd,0x7f,0x45,0x31,0x05,0x90,0x00,0x46,0xe0,
++0x44,0x10,0xfd,0x7f,0x46,0x80,0x38,0x90,0x9e,0x3f,0x74,0x01,0xf0,0x90,0x9e,0x45,
++0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9,
++0x90,0x00,0x45,0xe0,0x44,0x20,0xfd,0x7f,0x45,0x31,0x05,0x90,0x00,0x45,0xe0,0x44,
++0x10,0xfd,0x7f,0x45,0x31,0x05,0x90,0x00,0x46,0xe0,0x44,0x10,0xfd,0x7f,0x46,0x31,
++0x05,0x22,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x9e,0x41,0xf0,0x90,0x00,0x01,0x12,
++0x42,0x20,0x25,0xe0,0x25,0xe0,0x90,0x9e,0x40,0xf0,0x12,0x29,0xd9,0x25,0xe0,0x25,
++0xe0,0x90,0x9e,0x44,0xf0,0x90,0x05,0x60,0xe0,0x90,0x9e,0x4f,0xf0,0x90,0x05,0x61,
++0xe0,0x90,0x9e,0x50,0xf0,0x90,0x05,0x62,0xe0,0x90,0x9e,0x51,0xf0,0x90,0x05,0x63,
++0xe0,0x90,0x9e,0x52,0xf0,0xa2,0xaf,0xe4,0x33,0x90,0x9e,0x24,0xf0,0xc2,0xaf,0x90,
++0x9e,0x40,0xe0,0xff,0x91,0xf0,0x90,0x9e,0x24,0xe0,0x24,0xff,0x92,0xaf,0x90,0x9e,
++0x41,0xe0,0x70,0x02,0x41,0xc8,0x90,0x9e,0x40,0xe0,0x70,0x02,0x41,0xc8,0x90,0x9e,
++0x44,0xe0,0x70,0x02,0x41,0xc8,0xa2,0xaf,0xe4,0x33,0x90,0x9e,0x24,0xf0,0xc2,0xaf,
++0x90,0x9e,0x53,0x74,0x01,0xf0,0x90,0x9e,0x24,0xe0,0x24,0xff,0x92,0xaf,0x11,0xfc,
++0x90,0x00,0x46,0xe0,0x44,0x01,0xfd,0x7f,0x46,0x31,0x05,0x90,0x9e,0x39,0xe0,0x60,
++0x15,0x90,0x9e,0x45,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,
++0x08,0x12,0x2f,0xd9,0x80,0x06,0x90,0x05,0x22,0x74,0x7f,0xf0,0x90,0x00,0x45,0xe0,
++0x54,0xef,0xfd,0x7f,0x45,0x31,0x05,0x90,0x05,0x87,0xe0,0x64,0x80,0xf0,0x90,0x9e,
++0x4f,0xe0,0x90,0x05,0x84,0xf0,0x90,0x9e,0x50,0xe0,0x90,0x05,0x85,0xf0,0x90,0x9e,
++0x51,0xe0,0x90,0x05,0x86,0xf0,0x90,0x9e,0x52,0xe0,0x90,0x05,0x87,0xf0,0xa2,0xaf,
++0xe4,0x33,0x90,0x9e,0x24,0xf0,0xc2,0xaf,0x90,0x01,0x3c,0xe0,0x44,0x20,0xf0,0x7d,
++0x20,0xe4,0xff,0x12,0x37,0x00,0x80,0x2b,0x90,0x9e,0x41,0xe0,0x70,0x2d,0x90,0x9e,
++0x53,0x11,0xfb,0x90,0x00,0x46,0xe0,0x54,0xfe,0xfd,0x7f,0x46,0x31,0x05,0x90,0x05,
++0x22,0xe4,0xf0,0xa2,0xaf,0x33,0x90,0x9e,0x24,0xf0,0xc2,0xaf,0x7d,0x20,0xe4,0xff,
++0x12,0x36,0x92,0x90,0x9e,0x24,0xe0,0x24,0xff,0x92,0xaf,0x22,0x8b,0x14,0x8a,0x15,
++0x89,0x16,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x9e,0x42,0xf0,0xe0,0x30,0xe0,0x4b,
++0x90,0x9e,0x39,0x74,0x01,0xf0,0x7f,0x80,0x7e,0x08,0x12,0x27,0xde,0x90,0x9e,0x3b,
++0x12,0x2a,0x7f,0xab,0x14,0xaa,0x15,0xa9,0x16,0x90,0x00,0x01,0x12,0x42,0x20,0xff,
++0xe4,0xfc,0xfd,0xfe,0x78,0x1a,0x12,0x2a,0x6c,0xa8,0x04,0xa9,0x05,0xaa,0x06,0xab,
++0x07,0x90,0x9e,0x3b,0x12,0x43,0x53,0xec,0x54,0x03,0xfc,0x12,0x43,0x46,0x90,0x9e,
++0x45,0x12,0x2a,0x7f,0x90,0x05,0x22,0xe4,0xf0,0x80,0x2d,0xe4,0x90,0x9e,0x39,0xf0,
++0x7f,0x80,0x7e,0x08,0x12,0x27,0xde,0xec,0x54,0x03,0xfc,0xec,0x44,0xc0,0xfc,0x90,
++0x9e,0x3b,0x12,0x2a,0x7f,0x90,0x9e,0x3b,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,
++0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x9e,0x42,0xe0,0x30,0xe1,0x19,0x7d,
++0x0c,0x7f,0x47,0x31,0x05,0x90,0x00,0x48,0xe0,0x44,0x0c,0xfd,0x7f,0x48,0x31,0x05,
++0x90,0x00,0x46,0xe0,0x44,0x10,0x80,0x1c,0x90,0x00,0x47,0xe0,0x54,0xf3,0xfd,0x7f,
++0x47,0x31,0x05,0x90,0x00,0x48,0xe0,0x54,0xf3,0xfd,0x7f,0x48,0x31,0x05,0x90,0x00,
++0x46,0xe0,0x54,0xef,0xfd,0x7f,0x46,0x31,0x05,0xe4,0x90,0x9e,0x3f,0xf0,0x22,0x90,
++0x01,0x30,0xe4,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x01,0x38,0xf0,0xa3,0xf0,
++0xa3,0xf0,0xa3,0xf0,0xfd,0x7f,0x50,0x31,0x05,0xe4,0xfd,0x7f,0x51,0x31,0x05,0xe4,
++0xfd,0x7f,0x52,0x31,0x05,0xe4,0xfd,0x7f,0x53,0x21,0x05,0xe5,0x65,0x64,0x01,0x70,
++0x3b,0xd1,0x85,0xbf,0x01,0x04,0x7f,0x01,0xd1,0x79,0x90,0x00,0x46,0xe0,0x44,0x04,
++0xfd,0x7f,0x46,0x31,0x05,0x90,0x00,0x44,0xe0,0x54,0xfb,0xfd,0x7f,0x44,0x31,0x05,
++0x90,0x00,0x46,0xe0,0x54,0xfb,0xfd,0x7f,0x46,0x31,0x05,0x7f,0x02,0xd1,0xa1,0x8f,
++0x69,0x90,0x01,0xc9,0xe5,0x69,0xf0,0xb4,0x01,0x02,0xd1,0x19,0x22,0x90,0x9e,0x41,
++0xe0,0x64,0x01,0x60,0x02,0x81,0xef,0x90,0x00,0x46,0xe0,0x44,0x01,0xfd,0x7f,0x46,
++0x31,0x05,0x90,0x9e,0x53,0xe0,0x70,0x31,0x90,0x9e,0x39,0xe0,0x60,0x15,0x90,0x9e,
++0x45,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,
++0xd9,0x80,0x06,0x90,0x05,0x22,0x74,0x7f,0xf0,0x90,0x9e,0x40,0xe0,0xff,0x91,0xf0,
++0x90,0x9e,0x53,0x74,0x01,0x11,0xfb,0x80,0x3f,0x90,0x9e,0x53,0xe0,0x64,0x01,0x70,
++0x37,0x90,0x9e,0x44,0xe0,0xff,0x91,0xf0,0xe4,0x90,0x9e,0x53,0xf0,0x90,0x00,0x45,
++0xe0,0x44,0x01,0xfd,0x7f,0x45,0x31,0x05,0x90,0x9e,0x39,0xe0,0x60,0x15,0x90,0x9e,
++0x3b,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,
++0xd9,0x80,0x05,0x90,0x05,0x22,0xe4,0xf0,0x90,0x05,0x87,0xe0,0x64,0x80,0xf0,0x90,
++0x9e,0x4f,0xe0,0x90,0x05,0x84,0xf0,0x90,0x9e,0x50,0xe0,0x90,0x05,0x85,0xf0,0x90,
++0x9e,0x51,0xe0,0x90,0x05,0x86,0xf0,0x90,0x9e,0x52,0xe0,0x90,0x05,0x87,0xf0,0x22,
++0x90,0x05,0x60,0xe0,0x90,0x9e,0x4f,0xf0,0x90,0x05,0x61,0xe0,0x90,0x9e,0x50,0xf0,
++0x90,0x05,0x62,0xe0,0x90,0x9e,0x51,0xf0,0x90,0x05,0x63,0xe0,0x90,0x9e,0x52,0xf0,
++0xc3,0x74,0xff,0x9f,0xfe,0x90,0x9e,0x50,0xe0,0xd3,0x9e,0x40,0x1e,0xe0,0x2f,0xf0,
++0xa3,0xe0,0xb4,0xff,0x0f,0xe4,0xf0,0xa3,0xe0,0xb4,0xff,0x03,0xe4,0xf0,0x22,0x90,
++0x9e,0x52,0x80,0x03,0x90,0x9e,0x51,0xe0,0x04,0xf0,0x22,0x90,0x9e,0x50,0xe0,0x2f,
++0xf0,0x22,0xe0,0x5f,0xf0,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x7f,0x10,0xdf,0xfe,
++0xd0,0xd0,0x92,0xaf,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x2a,0xed,
++0xf0,0x90,0x9e,0x29,0xef,0xf0,0xd3,0x94,0x07,0x50,0x4e,0xa3,0xe0,0x70,0x1a,0x90,
++0x9e,0x29,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,
++0xff,0x90,0x00,0x47,0xe0,0x5f,0xf0,0x80,0x17,0x90,0x9e,0x29,0xe0,0xff,0x74,0x01,
++0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xff,0x90,0x00,0x47,0xe0,0x4f,0xf0,
++0xb1,0x45,0x90,0x9e,0x29,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,
++0xd8,0xfc,0xf4,0xff,0x90,0x00,0x46,0x80,0x59,0x90,0x9e,0x29,0xe0,0x24,0xf8,0xf0,
++0xa3,0xe0,0x70,0x1d,0x90,0x9e,0x29,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,
++0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0,0xf4,0xff,0x90,0x00,0x43,0xe0,0x5f,0xf0,0x80,
++0x1a,0x90,0x9e,0x29,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,
++0xfc,0xc4,0x54,0xf0,0xff,0x90,0x00,0x43,0xe0,0x4f,0xf0,0xb1,0x45,0x90,0x9e,0x29,
++0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,
++0x00,0x43,0xb1,0x42,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x00,0x49,0xe0,0x90,0x9e,0xb1,
++0xf0,0xe0,0x54,0x0f,0xf0,0x44,0xf0,0xfd,0x7f,0x49,0x31,0x05,0x90,0x9e,0xb1,0xe0,
++0x44,0xb0,0xfd,0x7f,0x49,0x21,0x05,0x90,0x9e,0x27,0xee,0xf0,0xa3,0xef,0xf0,0x75,
++0x65,0x01,0x8e,0x66,0xf5,0x67,0xe4,0xfd,0x7f,0x0b,0xb1,0x55,0xe4,0xfd,0x7f,0x02,
++0xb1,0x55,0xd1,0x85,0xe4,0xff,0xd1,0x79,0xe4,0xf5,0x69,0x90,0x01,0xc9,0xe5,0x69,
++0xf0,0x90,0x9e,0x27,0xe0,0xfc,0xa3,0xe0,0xfd,0xec,0xfb,0x8d,0x44,0xe4,0xf5,0x45,
++0x7d,0x01,0x7f,0x60,0x7e,0x01,0x02,0x35,0xab,0x90,0x01,0xca,0xe5,0x68,0xf0,0xef,
++0x60,0x02,0xd1,0x19,0x22,0x7f,0x0b,0xd1,0xa1,0xef,0x65,0x68,0x60,0x10,0xe5,0x68,
++0xb4,0x01,0x05,0xe4,0xf5,0x68,0x80,0x03,0x75,0x68,0x01,0x7f,0x01,0x22,0x7f,0x00,
++0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0xb2,0xef,0xf0,0xd3,0x94,0x07,
++0x50,0x43,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,
++0xff,0x90,0x00,0x46,0xb1,0x42,0x90,0x9e,0xb2,0xe0,0xfd,0x74,0x01,0x7e,0x00,0xa8,
++0x05,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x00,0x44,0xe0,
++0xfb,0xe4,0xfe,0xef,0x5b,0xa8,0x05,0x08,0x80,0x06,0xce,0xa2,0xe7,0x13,0xce,0x13,
++0xd8,0xf8,0xff,0x80,0x4b,0x90,0x9e,0xb2,0xe0,0x24,0xf8,0xf0,0xe0,0xff,0x74,0x01,
++0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x43,0xe0,0x5f,
++0xf0,0xb1,0x45,0x90,0x9e,0xb2,0xe0,0xfd,0x74,0x01,0x7e,0x00,0xa8,0x05,0x08,0x80,
++0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x00,0x42,0xe0,0xfb,0xe4,0xfe,
++0xef,0x5b,0xa8,0x05,0x08,0x80,0x06,0xce,0xa2,0xe7,0x13,0xce,0x13,0xd8,0xf8,0xff,
++0xd0,0xd0,0x92,0xaf,0x22,0xe4,0xfd,0x7f,0x45,0x31,0x05,0x90,0x04,0xfd,0xe4,0xf0,
++0xa3,0xf0,0x90,0x9e,0x43,0xf0,0x90,0x9e,0x49,0xf0,0x90,0x9e,0x4c,0xf0,0x90,0x9e,
++0x4a,0xf0,0x90,0x9e,0x4d,0xf0,0x90,0x9e,0x4b,0xf0,0x90,0x9e,0x4e,0xf0,0x90,0x9e,
++0x35,0x04,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x9e,0x3a,0xf0,0x90,0x9e,
++0x3f,0xf0,0x90,0x9e,0x41,0xf0,0x90,0x9e,0x53,0xf0,0x90,0x9e,0x44,0xf0,0x90,0x9e,
++0x40,0xf0,0x90,0x9e,0x39,0xf0,0x90,0x00,0x51,0xe0,0x44,0xc0,0xfd,0x7f,0x51,0x21,
++0x05,0xe4,0x90,0x9e,0x7d,0xf0,0x90,0x00,0x80,0xe0,0x44,0x80,0xfd,0x7f,0x80,0x21,
++0x05,0x75,0x30,0x1f,0x75,0x31,0x01,0xe4,0xf5,0x32,0x90,0x01,0x38,0xe5,0x30,0xf0,
++0xa3,0xe5,0x31,0xf0,0xa3,0xe5,0x32,0xf0,0x22,0xe4,0xf5,0x68,0x22,0x90,0x01,0x64,
++0x74,0xa0,0xf0,0x22,0x90,0x9e,0x80,0xe0,0x90,0x9e,0x0f,0xf0,0x22,0x90,0x00,0xf3,
++0xe0,0x7f,0x00,0x30,0xe3,0x02,0x7f,0x01,0x22,0x90,0x00,0x02,0xe0,0x54,0xe0,0x7f,
++0x01,0x60,0x02,0x7f,0x00,0x22,0x90,0x9e,0x80,0xe0,0xb4,0x01,0x0c,0x90,0x00,0xf2,
++0xe0,0x30,0xe7,0x05,0x7e,0xfd,0x7f,0x33,0x22,0x7e,0xfd,0x7f,0x2f,0x22,0x90,0x00,
++0xf3,0xe0,0x30,0xe2,0x0d,0x90,0x05,0x41,0x74,0x10,0xf0,0x90,0x05,0x5a,0xf0,0xa3,
++0xe4,0xf0,0x22,0x90,0x01,0x02,0xe0,0x54,0x03,0xff,0xe0,0x54,0x0c,0x13,0x13,0x54,
++0x3f,0xfe,0xef,0x64,0x01,0x60,0x04,0xef,0xb4,0x03,0x10,0x90,0x9e,0x10,0x74,0x01,
++0xf0,0xa3,0x74,0x37,0xf0,0xa3,0x74,0x01,0xf0,0x80,0x1a,0xee,0x64,0x01,0x60,0x07,
++0xaf,0x06,0xee,0x64,0x03,0x70,0x49,0x90,0x9e,0x10,0x74,0x01,0xf0,0xa3,0x74,0x3d,
++0xf0,0xa3,0x74,0x40,0xf0,0x90,0x9e,0x10,0xe0,0xfe,0xa3,0xe0,0xff,0xf5,0x82,0x8e,
++0x83,0xe0,0xfd,0x90,0x9e,0x12,0xe0,0xfc,0xed,0x5c,0x60,0x0c,0x8f,0x82,0x8e,0x83,
++0xec,0xf0,0xe4,0x90,0x9e,0x77,0xf0,0x22,0x90,0x9e,0x77,0xe0,0x04,0xf0,0xe0,0xc3,
++0x94,0x0a,0x40,0x0c,0xe4,0xf0,0x90,0x04,0x19,0xe0,0x30,0xe0,0x03,0x12,0x44,0xea,
++0x22,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0,0x82,0xc0,0xd0,0x75,0xd0,0x00,0xc0,0x00,
++0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0x90,0x01,
++0xc4,0x74,0xa1,0xf0,0x74,0x50,0xa3,0xf0,0x90,0x01,0x34,0xe0,0x55,0x28,0xf5,0x2c,
++0xa3,0xe0,0x55,0x29,0xf5,0x2d,0xa3,0xe0,0x55,0x2a,0xf5,0x2e,0xa3,0xe0,0x55,0x2b,
++0xf5,0x2f,0xe5,0x2c,0x20,0xe0,0x02,0x41,0x46,0x90,0x01,0x34,0x74,0x01,0xf0,0x85,
++0xd1,0x4d,0x85,0xd2,0x4e,0x85,0xd3,0x4f,0x85,0xd4,0x50,0x85,0xd5,0x51,0x85,0xd6,
++0x52,0x85,0xd7,0x53,0x85,0xd9,0x54,0xe5,0x54,0x54,0x40,0xc3,0x13,0xff,0xe5,0x53,
++0x54,0x20,0x6f,0x70,0x02,0x21,0xf5,0xe5,0x54,0x30,0xe5,0x02,0x21,0xf5,0xe5,0x52,
++0x54,0x3f,0xf5,0x08,0xe5,0x4d,0x54,0x3f,0xf5,0x09,0xe5,0x51,0x54,0x1f,0xff,0xe5,
++0x08,0x25,0xe0,0x24,0xc4,0xf5,0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0x8f,0xf0,0x12,
++0x42,0x81,0xe5,0x53,0x54,0x1f,0xff,0xe5,0x08,0x25,0xe0,0x24,0x80,0xf5,0x82,0xe4,
++0x34,0x93,0xf5,0x83,0xe4,0x8f,0xf0,0x12,0x42,0x81,0xe5,0x09,0xd3,0x94,0x04,0x40,
++0x03,0x75,0x09,0x04,0x75,0xf0,0x0a,0xe5,0x08,0x90,0x90,0x00,0x12,0x43,0x5f,0x75,
++0xf0,0x02,0xe5,0x09,0x12,0x43,0x5f,0xe0,0xfe,0xa3,0xe0,0xff,0xe5,0x53,0x54,0x1f,
++0x2f,0xff,0xe4,0x3e,0xfe,0x75,0xf0,0x0a,0xe5,0x08,0x90,0x90,0x00,0x12,0x43,0x5f,
++0x75,0xf0,0x02,0xe5,0x09,0x12,0x43,0x5f,0xee,0xf0,0xa3,0xef,0xf0,0xe5,0x54,0x20,
++0xe6,0x24,0xe5,0x53,0x54,0x1f,0xff,0xe5,0x08,0x25,0xe0,0x24,0xc4,0xf5,0x82,0xe4,
++0x34,0x98,0xf5,0x83,0xe4,0x8f,0xf0,0x12,0x42,0x81,0xe5,0x4f,0x30,0xe7,0x36,0xaf,
++0x08,0x12,0x63,0x51,0x80,0x2f,0xe5,0x53,0x54,0x1f,0xff,0xe5,0x08,0x25,0xe0,0x24,
++0x44,0xf5,0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0x8f,0xf0,0x12,0x42,0x81,0xe5,0x4f,
++0x30,0xe7,0x12,0xe5,0x4f,0x54,0x7f,0xfd,0xe5,0x53,0x54,0x1f,0xf5,0x0d,0xab,0x09,
++0xaf,0x08,0x12,0x62,0xee,0xe5,0x63,0x14,0x24,0xfd,0x50,0x02,0x80,0x48,0x90,0x9e,
++0x66,0xe0,0x60,0x3a,0x90,0x01,0x5b,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x04,0xf0,0x71,
++0xc3,0xef,0x64,0x01,0x70,0x30,0x90,0x9e,0x85,0xf0,0x90,0x9e,0x5b,0xe0,0x90,0x9e,
++0x86,0xf0,0xe4,0xfb,0xfd,0x7f,0x58,0x7e,0x01,0x12,0x44,0x5e,0x90,0x01,0x5b,0x74,
++0x05,0xf0,0x90,0x06,0x92,0x74,0x01,0xf0,0x90,0x9e,0x64,0xf0,0x80,0x08,0x71,0xc3,
++0xbf,0x01,0x03,0x12,0x44,0xcb,0xe5,0x2c,0x30,0xe1,0x20,0x90,0x01,0x34,0x74,0x02,
++0xf0,0x85,0xd1,0x58,0x85,0xd2,0x59,0x85,0xd3,0x5a,0x85,0xd4,0x5b,0x85,0xd5,0x5c,
++0x85,0xd6,0x5d,0x85,0xd7,0x5e,0x85,0xd9,0x5f,0x71,0xd2,0xe5,0x2c,0x30,0xe3,0x06,
++0x90,0x01,0x34,0x74,0x08,0xf0,0xe5,0x2c,0x30,0xe4,0x09,0x90,0x01,0x34,0x74,0x10,
++0xf0,0x43,0x57,0x10,0xe5,0x2c,0x30,0xe5,0x26,0x90,0x01,0xcf,0xe0,0x30,0xe5,0x1f,
++0xe0,0x54,0xdf,0xf0,0x90,0x01,0x34,0x74,0x20,0xf0,0x75,0xa8,0x00,0x75,0xe8,0x00,
++0x12,0x4b,0xcf,0x90,0x00,0x03,0xe0,0x54,0xfb,0xf0,0x12,0x4d,0x45,0x80,0xfe,0xe5,
++0x2c,0x30,0xe6,0x06,0x90,0x01,0x34,0x74,0x40,0xf0,0xe5,0x2e,0x30,0xe0,0x12,0x90,
++0x9e,0x7f,0x74,0x01,0xf0,0x90,0x01,0x36,0xf0,0x12,0x61,0x4e,0x90,0x9e,0x7f,0xe4,
++0xf0,0xe5,0x2e,0x30,0xe1,0x0b,0x90,0x01,0x36,0x74,0x02,0xf0,0x43,0x57,0x40,0x11,
++0x23,0xe5,0x2e,0x30,0xe2,0x09,0x90,0x01,0x36,0x74,0x04,0xf0,0x12,0x60,0xdf,0xe5,
++0x2e,0x30,0xe3,0x28,0x90,0x01,0x36,0x74,0x08,0xf0,0xe5,0x60,0x64,0x01,0x70,0x1c,
++0xe5,0x63,0x60,0x18,0x90,0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x90,
++0x9e,0x85,0xe4,0x12,0x44,0x4e,0x90,0x01,0x57,0x74,0x05,0xf0,0xe5,0x2e,0x30,0xe4,
++0x2b,0x90,0x01,0x36,0x74,0x10,0xf0,0xe5,0x60,0xb4,0x01,0x20,0xe5,0x63,0x60,0x1c,
++0x90,0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x90,0x9e,0x67,0xe4,0xf0,
++0x53,0x64,0xfd,0xe5,0x64,0x54,0x07,0x70,0x03,0x12,0x44,0xcb,0xe5,0x2e,0x30,0xe5,
++0x1f,0x90,0x01,0x36,0x74,0x20,0xf0,0xe5,0x60,0xb4,0x01,0x14,0xe5,0x63,0x60,0x10,
++0x90,0x9e,0x66,0xe0,0x64,0x02,0x60,0x05,0x12,0x44,0xd2,0x80,0x03,0x12,0x44,0x79,
++0xe5,0x2e,0x30,0xe6,0x1b,0x90,0x01,0x36,0x74,0x40,0xf0,0xe5,0x60,0xb4,0x01,0x10,
++0xe5,0x63,0x60,0x0c,0x53,0x64,0xfe,0xe5,0x64,0x54,0x07,0x70,0x03,0x12,0x44,0xcb,
++0xe5,0x2f,0x30,0xe1,0x08,0x90,0x01,0x37,0x74,0x02,0xf0,0x91,0x64,0x74,0xa1,0x04,
++0x90,0x01,0xc4,0xf0,0x74,0x50,0xa3,0xf0,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04,
++0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,0xd0,0x82,0xd0,0x83,0xd0,0xf0,
++0xd0,0xe0,0x32,0x90,0x04,0x1b,0xe0,0x54,0x7f,0x64,0x7f,0x7f,0x01,0x60,0x02,0x7f,
++0x00,0x22,0x90,0x9e,0x10,0xe0,0x54,0xf0,0x44,0x03,0xf0,0x54,0x0f,0x44,0x80,0xf0,
++0x7b,0x00,0x7a,0x00,0x79,0x58,0x90,0x9e,0x90,0x12,0x43,0x8b,0x0b,0x7a,0x9e,0x79,
++0x10,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x8d,0x12,0x43,0x8b,0x90,0x9e,
++0xb0,0xe0,0xff,0x04,0xf0,0x90,0x00,0x01,0xef,0x12,0x42,0x5f,0x7f,0xaf,0x7e,0x01,
++0x12,0x71,0x7a,0xef,0x60,0x49,0x90,0x9e,0x8d,0x12,0x43,0x6b,0x8b,0x23,0x8a,0x24,
++0x89,0x25,0x75,0x26,0x02,0x7b,0x01,0x7a,0x01,0x79,0xa0,0x12,0x45,0x09,0x90,0x9e,
++0x90,0x12,0x43,0x6b,0x8b,0x23,0x8a,0x24,0x89,0x25,0x90,0x9e,0x8d,0x12,0x43,0x6b,
++0x12,0x29,0xd9,0xff,0xc4,0x54,0x0f,0xf5,0x26,0x7b,0x01,0x7a,0x01,0x79,0xa2,0x12,
++0x45,0x09,0x90,0x01,0xaf,0x74,0xff,0xf0,0x90,0x01,0xcb,0xe0,0x64,0x80,0xf0,0xd0,
++0xd0,0x92,0xaf,0x22,0x90,0x9e,0xa0,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe5,0x63,
++0x14,0x24,0xfd,0x50,0x02,0x80,0x1f,0x90,0x9e,0x66,0xe0,0x60,0x06,0x7d,0x01,0x7f,
++0x0c,0x80,0x0d,0xe5,0x61,0x54,0x0f,0xc3,0x94,0x04,0x50,0x06,0x7d,0x01,0x7f,0x04,
++0x91,0xe7,0xe4,0xff,0x91,0x97,0x22,0xef,0x60,0x0b,0x90,0x9e,0x80,0xe0,0xb4,0x01,
++0x10,0xe4,0xff,0x80,0x09,0x90,0x9e,0x80,0xe0,0xb4,0x01,0x05,0x7f,0x01,0x12,0x75,
++0xa5,0x22,0x90,0x01,0x37,0x74,0x02,0xf0,0x90,0x05,0x22,0x74,0xff,0xf0,0x12,0x74,
++0x12,0xef,0x70,0x06,0x90,0x01,0xc8,0x74,0xfd,0xf0,0x7d,0x02,0x7f,0x03,0x12,0x36,
++0xe6,0xe5,0x63,0x60,0x04,0x7f,0x01,0x91,0x97,0x12,0x74,0xd2,0x53,0x61,0xf0,0x43,
++0x61,0x02,0x22,0x7d,0x01,0x7f,0x0c,0x8f,0x6a,0x8d,0x6b,0xe5,0x6a,0x54,0x0f,0xff,
++0xe5,0x61,0x54,0x0f,0x6f,0x60,0x65,0xe5,0x6a,0x30,0xe2,0x28,0xe5,0x61,0x20,0xe2,
++0x04,0x7f,0x01,0xd1,0xc2,0xe5,0x61,0x30,0xe3,0x0c,0xe5,0x6a,0x20,0xe3,0x07,0xb1,
++0x5d,0xef,0x60,0x48,0xa1,0xa5,0xe5,0x61,0x20,0xe3,0x41,0xe5,0x6a,0x30,0xe3,0x3c,
++0xaf,0x6b,0xc1,0xdc,0xe5,0x61,0x54,0x0f,0xff,0xbf,0x0c,0x0c,0xe5,0x6a,0x20,0xe3,
++0x07,0xb1,0x5d,0xef,0x60,0x26,0xb1,0xa5,0xe5,0x61,0x54,0x0f,0xff,0xbf,0x04,0x0c,
++0xe5,0x6a,0x20,0xe2,0x07,0xf1,0x21,0xef,0x60,0x12,0x91,0xb2,0xe5,0x61,0x54,0x0f,
++0xff,0xbf,0x02,0x08,0x12,0x60,0xbd,0xef,0x60,0x02,0xd1,0xaf,0x22,0x71,0xc3,0xef,
++0x64,0x01,0x60,0x08,0x90,0x01,0xb9,0x74,0x01,0xf0,0x80,0x30,0x90,0x9e,0x64,0xe0,
++0x60,0x08,0x90,0x01,0xb9,0x74,0x02,0xf0,0x80,0x22,0x90,0x9e,0x63,0xe0,0x60,0x08,
++0x90,0x01,0xb9,0x74,0x04,0xf0,0x80,0x14,0xe5,0x62,0x54,0x0f,0xd3,0x94,0x04,0x40,
++0x08,0x90,0x01,0xb9,0x74,0x08,0xf0,0x80,0x03,0x7f,0x01,0x22,0x90,0x01,0xb8,0x74,
++0x08,0xf0,0x7f,0x00,0x22,0x90,0x06,0x04,0xe0,0x44,0x40,0xf0,0xe5,0x60,0xb4,0x01,
++0x04,0x7f,0x01,0xd1,0xf6,0x53,0x61,0xf0,0x43,0x61,0x04,0x22,0xef,0x64,0x01,0x70,
++0x2e,0x7d,0x78,0x7f,0x02,0x12,0x36,0x75,0x7d,0x02,0x7f,0x03,0x12,0x36,0x75,0x90,
++0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x91,0xe3,0xe4,0xff,0x91,0x97,
++0x90,0x06,0x04,0xe0,0x54,0x7f,0xf0,0x90,0x06,0x0a,0xe0,0x54,0xf8,0xf0,0x22,0x90,
++0x01,0x36,0x74,0x7b,0xf0,0xa3,0x74,0x02,0xf0,0x7d,0x7b,0xff,0x12,0x36,0xe6,0x7d,
++0x02,0x7f,0x03,0x12,0x36,0xe6,0x90,0x06,0x04,0xe0,0x44,0x80,0xf0,0x90,0x06,0x0a,
++0xe0,0x44,0x07,0xf0,0x12,0x62,0x4c,0xe5,0x60,0x20,0xe0,0x05,0xe4,0x90,0x9e,0x58,
++0xf0,0x22,0x8b,0x14,0x8a,0x15,0x89,0x16,0x12,0x60,0xb1,0xab,0x14,0xaa,0x15,0xa9,
++0x16,0x12,0x29,0xd9,0xf5,0x63,0x14,0x60,0x0e,0x14,0x60,0x1e,0x14,0x60,0x2f,0x24,
++0x03,0x70,0x40,0x7f,0x01,0x80,0x3a,0xab,0x14,0xaa,0x15,0xa9,0x16,0x90,0x00,0x02,
++0x12,0x42,0x20,0xfd,0xe4,0xff,0xd1,0x84,0x80,0x27,0xab,0x14,0xaa,0x15,0xa9,0x16,
++0x90,0x00,0x02,0x12,0x42,0x20,0xfd,0x7f,0x01,0xd1,0x84,0x1f,0x80,0x13,0xab,0x14,
++0xaa,0x15,0xa9,0x16,0x90,0x00,0x02,0x12,0x42,0x20,0xfd,0x7f,0x02,0xd1,0x84,0xe4,
++0xff,0xb1,0xbc,0x22,0xef,0x24,0xfe,0x60,0x0b,0x04,0x70,0x22,0x90,0x9e,0x65,0x74,
++0x01,0xf0,0x80,0x16,0xed,0x70,0x0a,0x90,0x9e,0x62,0xe0,0x90,0x9e,0x65,0xf0,0x80,
++0x05,0x90,0x9e,0x65,0xed,0xf0,0x90,0x9e,0x65,0xe0,0x90,0x9e,0x56,0xf0,0x22,0x53,
++0x61,0xf0,0x43,0x61,0x01,0x12,0x45,0x00,0x12,0x45,0x01,0x53,0x61,0xf0,0x43,0x61,
++0x02,0x22,0x90,0x9e,0xaf,0xef,0xf0,0x12,0x74,0x53,0x90,0x9e,0xaf,0xe0,0x60,0x05,
++0x90,0x05,0x22,0xe4,0xf0,0x53,0x61,0xf0,0x43,0x61,0x04,0x22,0x90,0x06,0x04,0xe0,
++0x54,0xbf,0xf0,0xef,0x60,0x09,0xe5,0x60,0xb4,0x01,0x04,0xe4,0xff,0xd1,0xf6,0x53,
++0x61,0xf0,0x43,0x61,0x0c,0x22,0x8f,0x27,0x12,0x45,0xb0,0xbf,0x01,0x22,0x90,0x9e,
++0x7a,0xe0,0xff,0x7d,0x01,0x12,0x47,0x79,0xab,0x07,0xaa,0x06,0xad,0x03,0xac,0x02,
++0xaf,0x27,0x12,0x60,0x2a,0xaf,0x03,0x12,0x5f,0xf7,0x90,0x04,0x1f,0x74,0x20,0xf0,
++0x22,0x71,0xc3,0xef,0x64,0x01,0x60,0x08,0x90,0x01,0xb9,0x74,0x01,0xf0,0x80,0x58,
++0xe5,0x64,0x54,0x03,0x60,0x08,0x90,0x01,0xb9,0x74,0x02,0xf0,0x80,0x4a,0xe5,0x62,
++0x54,0x0f,0xd3,0x94,0x02,0x40,0x08,0x90,0x01,0xb9,0x74,0x04,0xf0,0x80,0x39,0xe5,
++0x64,0x30,0xe2,0x08,0x90,0x01,0xb9,0x74,0x08,0xf0,0x80,0x2c,0xe5,0x64,0x30,0xe4,
++0x08,0x90,0x01,0xb9,0x74,0x10,0xf0,0x80,0x1f,0x90,0x9e,0x58,0xe0,0x60,0x08,0x90,
++0x01,0xb9,0x74,0x20,0xf0,0x80,0x11,0x90,0x9e,0x5e,0xe0,0x60,0x08,0x90,0x01,0xb9,
++0x74,0x80,0xf0,0x80,0x03,0x7f,0x01,0x22,0x90,0x01,0xb8,0x74,0x04,0xf0,0x7f,0x00,
++0x22,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0,0x82,0xc0,0xd0,0x75,0xd0,0x00,0xc0,0x00,
++0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0x90,0x01,
++0xc4,0x74,0x91,0xf0,0x74,0x57,0xa3,0xf0,0x53,0x91,0xef,0x90,0x00,0x51,0xe0,0xff,
++0x90,0x00,0x55,0xe0,0x5f,0xf5,0x3d,0x90,0x00,0x52,0xe0,0xff,0x90,0x00,0x56,0xe0,
++0x5f,0xf5,0x3e,0xe5,0x3d,0x30,0xe4,0x06,0x90,0x00,0x55,0x74,0x10,0xf0,0xe5,0x3d,
++0x30,0xe5,0x06,0x90,0x00,0x55,0x74,0x20,0xf0,0xe5,0x3d,0x30,0xe6,0x1b,0x90,0x00,
++0x55,0x74,0x40,0xf0,0x90,0x9e,0x42,0xe0,0x54,0x03,0xff,0xbf,0x03,0x0b,0x90,0x9e,
++0x3f,0xe0,0x60,0x05,0x7f,0x01,0x12,0x49,0x1a,0xe5,0x3d,0x30,0xe7,0x15,0x90,0x00,
++0x55,0x74,0x80,0xf0,0x90,0x9e,0x42,0xe0,0x54,0x03,0xff,0xbf,0x03,0x05,0x7f,0x02,
++0x12,0x49,0x1a,0xe5,0x3e,0x30,0xe0,0x06,0x90,0x00,0x56,0x74,0x01,0xf0,0xe5,0x3e,
++0x30,0xe1,0x06,0x90,0x00,0x56,0x74,0x02,0xf0,0xe5,0x3e,0x30,0xe2,0x06,0x90,0x00,
++0x56,0x74,0x04,0xf0,0xe5,0x3e,0x30,0xe3,0x06,0x90,0x00,0x56,0x74,0x08,0xf0,0x90,
++0x01,0xc4,0x74,0x91,0xf0,0x74,0x57,0xa3,0xf0,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,
++0x04,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,0xd0,0x82,0xd0,0x83,0xd0,
++0xf0,0xd0,0xe0,0x32,0x90,0x01,0xcc,0xe0,0x54,0x0f,0x90,0x9e,0x19,0xf0,0x90,0x9e,
++0x19,0xe0,0xfd,0x70,0x02,0x21,0xb5,0x90,0x9e,0xae,0xe0,0xff,0x74,0x01,0x7e,0x00,
++0xa8,0x07,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0xef,0x5d,0x70,
++0x02,0x21,0xae,0x90,0x9e,0xae,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd0,0x12,0x43,0x5f,
++0xe0,0x90,0x9e,0x1a,0xf0,0x75,0x23,0x01,0x75,0x24,0x9e,0x75,0x25,0x1a,0x75,0x26,
++0x01,0x7b,0x01,0x7a,0x9e,0x79,0x1b,0x12,0x45,0x09,0x90,0x9e,0x1b,0xe0,0xff,0xc4,
++0x13,0x13,0x13,0x54,0x01,0x90,0x9e,0xae,0x30,0xe0,0x59,0xe0,0x75,0xf0,0x02,0x90,
++0x00,0x88,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x1c,0xf0,0x90,0x9e,0xae,0xe0,0x75,0xf0,
++0x02,0x90,0x00,0x89,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x1d,0xf0,0x90,0x9e,0xae,0xe0,
++0x75,0xf0,0x04,0x90,0x01,0xd1,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x1e,0xf0,0x90,0x9e,
++0xae,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd2,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x1f,0xf0,
++0x90,0x9e,0xae,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd3,0x12,0x43,0x5f,0xe0,0x90,0x9e,
++0x20,0xf0,0x80,0x33,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd1,0x12,0x43,0x5f,0xe0,0x90,
++0x9e,0x1c,0xf0,0x90,0x9e,0xae,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd2,0x12,0x43,0x5f,
++0xe0,0x90,0x9e,0x1d,0xf0,0x90,0x9e,0xae,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd3,0x12,
++0x43,0x5f,0xe0,0x90,0x9e,0x1e,0xf0,0xef,0x54,0x7f,0xff,0x7b,0x01,0x7a,0x9e,0x79,
++0x1c,0x31,0xb6,0x90,0x9e,0x19,0xe0,0xff,0x90,0x9e,0xae,0xe0,0xfe,0x74,0x01,0xa8,
++0x06,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0x5f,0x90,0x9e,0x19,0xf0,0x90,0x9e,
++0xae,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0x90,0x01,
++0xcc,0xf0,0x90,0x9e,0xae,0xe0,0x04,0xf0,0xe0,0x54,0x03,0xf0,0x01,0x7e,0x90,0x01,
++0xc6,0xe0,0x44,0x02,0xf0,0x22,0x90,0x9e,0x21,0x12,0x43,0x8b,0xef,0x12,0x43,0x94,
++0x59,0xfc,0x01,0x59,0xf4,0x02,0x5a,0x20,0x03,0x5a,0x29,0x05,0x5a,0x32,0x06,0x5a,
++0x7e,0x07,0x5a,0x3a,0x09,0x5a,0x43,0x0b,0x5a,0x4c,0x0c,0x5a,0x55,0x0d,0x5a,0x5e,
++0x0e,0x5a,0x67,0x1b,0x5a,0x6f,0x1c,0x5a,0x05,0x2d,0x5a,0x0e,0x2e,0x5a,0x17,0x3b,
++0x00,0x00,0x5a,0x77,0x90,0x9e,0x21,0x12,0x43,0x6b,0xe1,0xe9,0x90,0x9e,0x21,0x12,
++0x43,0x6b,0x02,0x71,0xd0,0x90,0x9e,0x21,0x12,0x43,0x6b,0x02,0x72,0x0b,0x90,0x9e,
++0x21,0x12,0x43,0x6b,0x02,0x72,0x53,0x90,0x9e,0x21,0x12,0x43,0x6b,0x02,0x72,0x8c,
++0x90,0x9e,0x21,0x12,0x43,0x6b,0x02,0x72,0xb6,0x90,0x9e,0x21,0x12,0x43,0x6b,0x02,
++0x70,0x4a,0x90,0x9e,0x21,0x12,0x43,0x6b,0x80,0x45,0x90,0x9e,0x21,0x12,0x43,0x6b,
++0x02,0x72,0xfe,0x90,0x9e,0x21,0x12,0x43,0x6b,0x02,0x70,0xa2,0x90,0x9e,0x21,0x12,
++0x43,0x6b,0x02,0x49,0xc2,0x90,0x9e,0x21,0x12,0x43,0x6b,0x02,0x7b,0x29,0x90,0x9e,
++0x21,0x12,0x43,0x6b,0x02,0x4a,0xfc,0x90,0x9e,0x21,0x12,0x43,0x6b,0xe1,0xef,0x90,
++0x9e,0x21,0x12,0x43,0x6b,0xe1,0xd1,0x90,0x01,0xc6,0xe0,0x44,0x01,0xf0,0x22,0x90,
++0x00,0x04,0x12,0x42,0x20,0xff,0x54,0x1f,0xfe,0xef,0x54,0x20,0xc4,0x13,0x54,0x07,
++0xfd,0xaf,0x06,0x90,0x9e,0x24,0xef,0xf0,0xa3,0xed,0xf0,0xa3,0x12,0x43,0x8b,0x90,
++0x9e,0x26,0x12,0x43,0x6b,0x90,0x00,0x03,0x12,0x42,0x20,0x54,0xf0,0xc4,0x54,0x0f,
++0x90,0x9e,0x29,0xf0,0x90,0x00,0x04,0x12,0x42,0x20,0x54,0x40,0xc4,0x13,0x13,0x54,
++0x03,0x90,0x9e,0x2a,0xf0,0x90,0x9e,0x24,0xe0,0xff,0x75,0xf0,0x09,0x90,0x96,0x46,
++0x12,0x43,0x5f,0xad,0x82,0xac,0x83,0x90,0x9e,0x2b,0xec,0xf0,0xa3,0xed,0xf0,0xef,
++0x75,0xf0,0x09,0xa4,0x24,0x44,0xf9,0x74,0x96,0x35,0xf0,0xfa,0x7b,0x01,0xa3,0x12,
++0x43,0x8b,0x90,0x9e,0x26,0x12,0x43,0x6b,0x90,0x00,0x03,0x12,0x42,0x20,0x54,0x0f,
++0xff,0x90,0x9e,0x2d,0x12,0x43,0x6b,0xef,0x12,0x42,0x4d,0x90,0x9e,0x26,0x12,0x43,
++0x6b,0x90,0x00,0x02,0x12,0x42,0x20,0xff,0x90,0x9e,0x2d,0x12,0x43,0x6b,0x90,0x00,
++0x01,0xef,0x12,0x42,0x5f,0x90,0x9e,0x26,0x12,0x43,0x6b,0x90,0x00,0x01,0x12,0x42,
++0x20,0xff,0x90,0x9e,0x2b,0xe0,0xfc,0xa3,0xe0,0xfd,0xf5,0x82,0x8c,0x83,0xef,0xf0,
++0x12,0x29,0xd9,0x8d,0x82,0x8c,0x83,0xa3,0xf0,0x90,0x9e,0x29,0xe0,0xfe,0x90,0x9e,
++0x24,0xe0,0xff,0x24,0x82,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xee,0xf0,0x90,0x9e,
++0x25,0xe0,0xfe,0x75,0xf0,0x09,0xef,0x90,0x96,0x4a,0x12,0x43,0x5f,0xee,0xf0,0x75,
++0xf0,0x09,0xef,0x90,0x96,0x4b,0x12,0x43,0x5f,0x74,0x01,0xf0,0x90,0x9e,0x2a,0xe0,
++0xfe,0x75,0xf0,0x09,0xef,0x90,0x96,0x4c,0x12,0x43,0x5f,0xee,0xf0,0x8f,0x14,0xef,
++0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xaf,0x82,0xf5,0x16,0x8f,0x17,0xe5,
++0x14,0x75,0xf0,0x02,0xa4,0x24,0x02,0xf9,0x74,0x95,0x35,0xf0,0x75,0x18,0x01,0xf5,
++0x19,0x89,0x1a,0x75,0xf0,0x09,0xe5,0x14,0x90,0x96,0x46,0x12,0x43,0x5f,0xaf,0x82,
++0x85,0x83,0x1b,0x8f,0x1c,0xe5,0x14,0x75,0xf0,0x09,0xa4,0x24,0x44,0xf9,0x74,0x96,
++0x35,0xf0,0x75,0x1d,0x01,0xf5,0x1e,0x89,0x1f,0x74,0x82,0x25,0x14,0xf5,0x82,0xe4,
++0x34,0x95,0xf5,0x83,0xe0,0x12,0x43,0x94,0x5c,0x0d,0x00,0x5c,0x22,0x01,0x5c,0x37,
++0x02,0x5c,0x4c,0x03,0x5c,0x75,0x04,0x5c,0x8a,0x05,0x5c,0x9f,0x06,0x5c,0xc5,0x0c,
++0x5c,0xf2,0x0d,0x5d,0x1f,0x0e,0x5d,0x4c,0x0f,0x00,0x00,0x5d,0x80,0xe5,0x14,0x25,
++0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0x74,0xf0,0xf0,0xa3,0x74,0x15,
++0x80,0x3c,0xe5,0x14,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0x74,
++0xf0,0xf0,0xa3,0x74,0x10,0x80,0x27,0xe5,0x14,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,
++0x34,0x9b,0xf5,0x83,0x74,0xf0,0xf0,0xa3,0x74,0x05,0x80,0x12,0xe5,0x14,0x25,0xe0,
++0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0x74,0xf0,0xf0,0xa3,0xe4,0xf0,0xe5,
++0x14,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0x74,0x0f,0xf0,0xa3,
++0x74,0x8f,0xf0,0xa1,0x80,0xe5,0x14,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,
++0xf5,0x83,0x74,0x0f,0xf0,0xa3,0x74,0xf5,0x80,0x27,0xe5,0x14,0x25,0xe0,0x24,0xc6,
++0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0x74,0x0f,0xf0,0xa3,0x74,0xf0,0x80,0x12,0xe5,
++0x14,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe4,0xf0,0xa3,0x74,
++0x0d,0xf0,0xe5,0x14,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe4,
++0xf0,0xa3,0xf0,0xa1,0x80,0x90,0x04,0x47,0xe0,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x12,
++0x42,0x4d,0x90,0x04,0x46,0xe0,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x90,0x00,0x01,0x12,
++0x42,0x5f,0x90,0x04,0x45,0xe0,0x85,0x17,0x82,0x85,0x16,0x83,0xf0,0x90,0x04,0x44,
++0xa1,0x77,0x90,0x04,0x4b,0xe0,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x12,0x42,0x4d,0x90,
++0x04,0x4a,0xe0,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x90,0x00,0x01,0x12,0x42,0x5f,0x90,
++0x04,0x49,0xe0,0x85,0x17,0x82,0x85,0x16,0x83,0xf0,0x90,0x04,0x48,0x80,0x58,0x90,
++0x04,0x4f,0xe0,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x12,0x42,0x4d,0x90,0x04,0x4e,0xe0,
++0xab,0x18,0xaa,0x19,0xa9,0x1a,0x90,0x00,0x01,0x12,0x42,0x5f,0x90,0x04,0x4d,0xe0,
++0x85,0x17,0x82,0x85,0x16,0x83,0xf0,0x90,0x04,0x4c,0x80,0x2b,0x90,0x04,0x53,0xe0,
++0xab,0x18,0xaa,0x19,0xa9,0x1a,0x12,0x42,0x4d,0x90,0x04,0x52,0xe0,0xab,0x18,0xaa,
++0x19,0xa9,0x1a,0x90,0x00,0x01,0x12,0x42,0x5f,0x90,0x04,0x51,0xe0,0x85,0x17,0x82,
++0x85,0x16,0x83,0xf0,0x90,0x04,0x50,0xe0,0x85,0x17,0x82,0x85,0x16,0x83,0xa3,0xf0,
++0xab,0x18,0xaa,0x19,0xa9,0x1a,0xc0,0x03,0xc0,0x02,0xc0,0x01,0x12,0x29,0xd9,0xff,
++0xab,0x1d,0xaa,0x1e,0xa9,0x1f,0x12,0x29,0xd9,0x5f,0xd0,0x01,0xd0,0x02,0xd0,0x03,
++0x12,0x42,0x4d,0xab,0x18,0xe5,0x1a,0x24,0x01,0xf9,0xe4,0x35,0x19,0xfa,0xc0,0x03,
++0xc0,0x02,0xc0,0x01,0x12,0x29,0xd9,0xff,0xab,0x1d,0xaa,0x1e,0xa9,0x1f,0x90,0x00,
++0x01,0x12,0x42,0x20,0x5f,0xd0,0x01,0xd0,0x02,0xd0,0x03,0x12,0x42,0x4d,0x85,0x17,
++0x82,0x85,0x16,0x83,0xc0,0x83,0xc0,0x82,0xe0,0xff,0x85,0x1c,0x82,0x85,0x1b,0x83,
++0xe0,0xfe,0xef,0x5e,0xd0,0x82,0xd0,0x83,0xf0,0x85,0x17,0x82,0x85,0x16,0x83,0xa3,
++0xc0,0x83,0xc0,0x82,0xe0,0xff,0x85,0x1c,0x82,0x85,0x1b,0x83,0xa3,0xe0,0xfe,0xef,
++0x5e,0xd0,0x82,0xd0,0x83,0xf0,0xe5,0x14,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,
++0x95,0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0x4e,0x60,0x3b,0x75,0x15,0x0b,0x74,0x01,0x7e,
++0x00,0xa8,0x15,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0xe5,0x14,
++0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0,0x5e,0xfe,0xa3,0xe0,
++0x5f,0x4e,0x60,0x06,0xe5,0x15,0x24,0x10,0x80,0x5d,0x15,0x15,0xe5,0x15,0xc3,0x94,
++0x00,0x50,0xca,0x80,0x56,0xe5,0x14,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,
++0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0x4e,0x60,0x3d,0x75,0x15,0x0f,0x74,0x01,0x7e,0x00,
++0xa8,0x15,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0xe5,0x14,0x25,
++0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe0,0x5e,0xfe,0xa3,0xe0,0x5f,
++0x4e,0x60,0x08,0x90,0x9e,0x30,0xe5,0x15,0xf0,0x80,0x10,0x15,0x15,0xe5,0x15,0xc3,
++0x94,0x00,0x50,0xc8,0x80,0x05,0xe4,0x90,0x9e,0x30,0xf0,0xe5,0x14,0x25,0xe0,0x24,
++0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0x4e,0x60,0x3b,0xe4,
++0xf5,0x15,0x74,0x01,0x7e,0x00,0xa8,0x15,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,
++0xd8,0xf9,0xff,0xe5,0x14,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,
++0xe0,0x5e,0xfe,0xa3,0xe0,0x5f,0x4e,0x60,0x08,0x90,0x9e,0x31,0xe5,0x15,0xf0,0x80,
++0x5b,0x05,0x15,0xe5,0x15,0xb4,0x10,0xca,0x80,0x52,0xe5,0x14,0x25,0xe0,0x24,0x02,
++0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0x4e,0x60,0x39,0xe4,0xf5,
++0x15,0x74,0x01,0x7e,0x00,0xa8,0x15,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,
++0xf9,0xff,0xe5,0x14,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0,
++0x5e,0xfe,0xa3,0xe0,0x5f,0x4e,0x60,0x06,0xe5,0x15,0x24,0x10,0x80,0x0a,0x05,0x15,
++0xe5,0x15,0xb4,0x0c,0xcc,0x80,0x05,0xe4,0x90,0x9e,0x31,0xf0,0x90,0x9e,0x30,0xe0,
++0xff,0x75,0xf0,0x09,0xe5,0x14,0x90,0x96,0x48,0x12,0x43,0x5f,0xef,0xf0,0x90,0x9e,
++0x31,0xe0,0xfe,0x75,0xf0,0x09,0xe5,0x14,0x90,0x96,0x49,0x12,0x43,0x5f,0xee,0xf0,
++0x74,0x84,0x25,0x14,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0,0xd3,0x9f,0x40,0x06,
++0x90,0x9e,0x30,0x12,0x62,0x94,0x74,0x84,0x25,0x14,0xf5,0x82,0xe4,0x34,0x04,0xf5,
++0x83,0xe0,0xff,0x90,0x9e,0x31,0xe0,0xfe,0xef,0xc3,0x9e,0x50,0x03,0x12,0x62,0x94,
++0x90,0x9e,0x30,0xe0,0xff,0xd3,0x94,0x13,0x40,0x07,0x90,0x96,0x43,0x74,0x03,0xf0,
++0x22,0xef,0xd3,0x94,0x0b,0x40,0x07,0x90,0x96,0x43,0x74,0x02,0xf0,0x22,0xef,0xd3,
++0x94,0x03,0x40,0x07,0x90,0x96,0x43,0x74,0x01,0xf0,0x22,0xe4,0x90,0x96,0x43,0xf0,
++0x22,0x90,0x00,0x04,0x12,0x42,0x20,0xff,0x54,0x3f,0xfe,0xef,0x54,0x80,0xc4,0x13,
++0x13,0x13,0x54,0x01,0xfd,0xaf,0x06,0x41,0x93,0x12,0x29,0xd9,0xf5,0x60,0x22,0x12,
++0x29,0xd9,0x90,0x95,0x01,0xf0,0x22,0xad,0x07,0x74,0x11,0x2d,0xf5,0x82,0xe4,0x34,
++0xfc,0xf5,0x83,0xe0,0x44,0x01,0xf0,0x90,0x04,0x80,0xe0,0x54,0x0f,0xfc,0x74,0x14,
++0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xc0,0x4c,0xfd,0x74,0x14,0x2f,
++0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xed,0xf0,0x22,0xef,0x60,0x0f,0x74,0x21,0x2d,
++0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x10,0xf0,0x22,0x74,0x21,0x2d,0xf5,
++0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xef,0xf0,0x22,0xe4,0xf5,0x60,0xf5,0x64,
++0xf5,0x63,0x75,0x62,0x0c,0x75,0x61,0x0c,0x90,0x9e,0x66,0xf0,0x90,0x9e,0x64,0xf0,
++0x90,0x9e,0x63,0xf0,0x90,0x9e,0x65,0x04,0xf0,0x90,0x9e,0x56,0xf0,0xe4,0x90,0x9e,
++0x67,0xf0,0x90,0x9e,0x58,0xf0,0x90,0x9e,0x61,0x74,0x07,0xf0,0xe4,0x90,0x9e,0x57,
++0xf0,0x90,0x9e,0x5f,0xf0,0xa3,0x74,0x03,0xf0,0x90,0x9e,0x5c,0x74,0x0a,0xf0,0xa3,
++0x74,0x05,0xf0,0x90,0x9e,0x5b,0x74,0x14,0xf0,0x90,0x9e,0x62,0x74,0x05,0xf0,0xe4,
++0x90,0x9e,0x5a,0xf0,0x90,0x9e,0x55,0xf0,0x90,0x9e,0x7f,0xf0,0x90,0x9e,0x5e,0xf0,
++0x22,0xe4,0x90,0x9e,0x67,0xf0,0x90,0x9e,0x57,0xf0,0xf5,0x64,0x22,0x7f,0x00,0x22,
++0xe5,0x62,0x30,0xe6,0x19,0xe5,0x62,0x54,0x0f,0xff,0x90,0x9e,0x54,0xe0,0xfe,0x4f,
++0x90,0x01,0x2f,0xf0,0xee,0x64,0x80,0x90,0x9e,0x54,0xf0,0x53,0x62,0xbf,0x22,0xe5,
++0x60,0x64,0x01,0x70,0x68,0xe5,0x63,0x60,0x64,0xe5,0x63,0x64,0x02,0x60,0x06,0xe5,
++0x63,0x64,0x05,0x70,0x27,0x90,0x06,0xab,0xe0,0x90,0x9e,0x56,0xf0,0x90,0x06,0xaa,
++0xe0,0x90,0x9e,0x65,0xf0,0x90,0x9e,0x56,0xe0,0x70,0x07,0x90,0x9e,0x65,0xe0,0xff,
++0x80,0x05,0x90,0x9e,0x56,0xe0,0xff,0x90,0x9e,0x56,0xef,0xf0,0x90,0x9e,0x58,0xe0,
++0x60,0x03,0xe0,0x14,0xf0,0xe4,0x90,0x9e,0x57,0xf0,0x90,0x05,0x58,0x74,0x03,0xf0,
++0x90,0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x53,0x64,0xfd,0x53,0x64,
++0xef,0xe5,0x63,0x14,0x24,0xfd,0x50,0x02,0x80,0x03,0x12,0x45,0x53,0x22,0xe4,0xfb,
++0x90,0x9e,0x9c,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe5,0x63,0x60,0x6a,0xe5,0x60,
++0x64,0x01,0x70,0x64,0xe5,0x63,0x14,0x60,0x2b,0x24,0xfd,0x60,0x27,0x24,0x02,0x24,
++0xfb,0x50,0x02,0x80,0x21,0x90,0x9e,0x56,0xe0,0x14,0xf0,0xe0,0x60,0x04,0xa3,0xe0,
++0x60,0x14,0x90,0x9e,0x56,0xe0,0x70,0x08,0x90,0x9e,0x65,0xe0,0x90,0x9e,0x56,0xf0,
++0x7b,0x01,0x80,0x02,0x7b,0x01,0xeb,0x60,0x2f,0x43,0x64,0x10,0xe4,0x90,0x9e,0x85,
++0xf0,0x90,0x9e,0x57,0xe0,0x75,0xf0,0x03,0xa4,0xff,0x90,0x9e,0x61,0xe0,0x2f,0x12,
++0x44,0x53,0x90,0x01,0x57,0x74,0x05,0xf0,0xe5,0x61,0x54,0x0f,0xc3,0x94,0x04,0x50,
++0x07,0x7d,0x01,0x7f,0x04,0x12,0x54,0xe7,0x22,0xe4,0x90,0x9e,0x15,0xf0,0xe5,0x63,
++0x60,0x79,0x90,0x9e,0x67,0xe0,0x60,0x0d,0xe4,0xf0,0x53,0x64,0xfd,0xe5,0x64,0x54,
++0x07,0x70,0x68,0x80,0x63,0x90,0x9e,0x57,0xe0,0x04,0xf0,0x53,0x64,0xef,0x90,0x9e,
++0x15,0xe0,0xf9,0xff,0x7e,0x00,0x24,0x01,0xfd,0xee,0x33,0xfc,0x90,0x9e,0x57,0xe0,
++0xb5,0x05,0x06,0xe4,0xb5,0x04,0x02,0x80,0x12,0xef,0x24,0x02,0xff,0xe4,0x3e,0xfe,
++0x90,0x9e,0x57,0xe0,0xb5,0x07,0x0a,0xe4,0xb5,0x06,0x06,0x90,0x05,0x58,0xe0,0x04,
++0xf0,0xe9,0xff,0x90,0x9e,0x5c,0xe0,0x2f,0xff,0xe4,0x33,0xfe,0x90,0x9e,0x57,0xe0,
++0xd3,0x9f,0xee,0x64,0x80,0xf8,0x74,0x80,0x98,0x40,0x0d,0xe5,0x60,0xb4,0x01,0x0b,
++0xa3,0xe0,0x70,0x07,0xe0,0x04,0xf0,0x22,0x12,0x44,0xcb,0x22,0x90,0x9e,0x5f,0xe0,
++0xa3,0xe0,0x90,0x05,0x58,0xf0,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,
++0x93,0x12,0x43,0x8b,0x90,0x9e,0x96,0xe0,0x54,0xf0,0x44,0x06,0xff,0xf0,0xed,0x54,
++0x0f,0xc4,0x54,0xf0,0xfe,0xef,0x54,0x0f,0x4e,0xf0,0x90,0x9e,0x93,0x12,0x43,0x6b,
++0x90,0x9e,0x90,0x12,0x43,0x8b,0x7b,0x01,0x7a,0x9e,0x79,0x96,0x12,0x53,0xf1,0xd0,
++0xd0,0x92,0xaf,0x22,0xe0,0xfd,0x74,0x26,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9d,0xf5,
++0x83,0xed,0xf0,0xaf,0x14,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0xef,0xc3,0x94,0x20,
++0x50,0x0e,0x74,0x84,0x2f,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xed,0xf0,0x80,0x29,
++0x74,0xa6,0x2f,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xed,0xf0,0x90,0x9e,0x68,0xef,
++0xf0,0x24,0xa6,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0x90,0x9e,0x69,0xf0,0x7b,
++0x01,0x7a,0x9e,0x79,0x68,0x7d,0x02,0x51,0x57,0xd0,0xd0,0x92,0xaf,0x22,0x8f,0x0a,
++0x8d,0x0b,0xe5,0x0b,0x54,0x1f,0xf5,0x10,0x74,0x01,0x2f,0xf5,0x82,0xe4,0x34,0x94,
++0xf5,0x83,0xe0,0xf5,0x0e,0x90,0x04,0xfd,0xe0,0xb4,0x01,0x05,0x75,0x11,0x03,0x80,
++0x03,0x75,0x11,0x01,0xeb,0xc3,0x95,0x11,0x40,0x04,0xaf,0x0a,0x80,0x33,0xe5,0x0e,
++0x25,0x0d,0xf5,0x0f,0xe5,0x10,0x90,0x41,0xd6,0x93,0xff,0xe5,0x0f,0xd3,0x9f,0x74,
++0x01,0x40,0x11,0x25,0x0a,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83,0xe4,0xf0,0xad,0x0b,
++0xaf,0x0a,0x41,0xa5,0x25,0x0a,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83,0xe5,0x0f,0xf0,
++0x22,0xad,0x07,0x75,0xf0,0x09,0xed,0x90,0x96,0x48,0x12,0x43,0x5f,0xe0,0xff,0x74,
++0x67,0x2d,0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0xe0,0x54,0x1f,0xf5,0x12,0xd3,0x9f,
++0x40,0x02,0x8f,0x12,0xe5,0x12,0x25,0xe0,0x24,0x9e,0xf5,0x82,0xe4,0x34,0x41,0xf5,
++0x83,0xe4,0x93,0xfe,0x74,0x01,0x93,0xff,0xe5,0x12,0x25,0xe0,0x24,0x66,0xf5,0x82,
++0xe4,0x34,0x41,0xf5,0x83,0x74,0x01,0x93,0x2f,0xff,0xe4,0x93,0x3e,0xc3,0x13,0xfe,
++0xef,0x13,0xff,0xed,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xee,
++0xf0,0xa3,0xef,0xf0,0xaf,0x05,0xad,0x12,0x51,0xa5,0xaf,0x12,0x22,0xac,0x07,0xec,
++0xc3,0x94,0x20,0x50,0x0d,0x74,0x84,0x2c,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0,
++0x80,0x0b,0x74,0xa6,0x2c,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0x54,0x7f,0xf5,
++0x1f,0xe5,0x1f,0x54,0x1f,0xff,0x90,0x9e,0x25,0xf0,0x75,0xf0,0x09,0xec,0x90,0x96,
++0x49,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x27,0xf0,0x75,0xf0,0x09,0xec,0x90,0x96,0x48,
++0x12,0x43,0x5f,0xe0,0xfe,0x90,0x9e,0x28,0xf0,0xec,0x25,0xe0,0x24,0xc6,0xf5,0x82,
++0xe4,0x34,0x9b,0xf5,0x83,0xe0,0xfb,0xa3,0xe0,0x90,0x9e,0x29,0xcb,0xf0,0xa3,0xeb,
++0xf0,0xec,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0,0xfb,0xa3,
++0xe0,0x90,0x9e,0x2b,0xcb,0xf0,0xa3,0xeb,0xf0,0xef,0xd3,0x9e,0x40,0x0a,0x90,0x9e,
++0x28,0xe0,0x90,0x9e,0x25,0xf0,0xf5,0x1f,0xed,0x70,0x02,0xa1,0x13,0x90,0x9e,0x26,
++0xed,0xf0,0xe5,0x1f,0x30,0xe6,0x0a,0x90,0x9e,0x25,0xe0,0xf5,0x1f,0xa3,0xe0,0x14,
++0xf0,0x90,0x9e,0x26,0xe0,0x70,0x02,0xa1,0x13,0x90,0x9e,0x25,0xe0,0xff,0xd3,0x94,
++0x00,0x50,0x02,0xa1,0x13,0xe4,0x90,0x9e,0x24,0xf0,0xef,0x14,0x90,0x9e,0x23,0xf0,
++0x90,0x9e,0x27,0xe0,0xfd,0x90,0x9e,0x23,0xe0,0xff,0xd3,0x9d,0x40,0x6b,0xef,0x94,
++0x10,0x40,0x21,0xef,0x24,0xf0,0xff,0x74,0x01,0x7e,0x00,0xa8,0x07,0x08,0x80,0x05,
++0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x9e,0x2b,0xe0,0x5e,0xfe,0xa3,0xe0,
++0x5f,0x4e,0x70,0x27,0x90,0x9e,0x23,0xe0,0xff,0xc3,0x94,0x10,0x50,0x33,0x74,0x01,
++0x7e,0x00,0xa8,0x07,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,
++0x9e,0x29,0xe0,0x5e,0xfe,0xa3,0xe0,0x5f,0x4e,0x60,0x16,0x90,0x9e,0x23,0xe0,0xf5,
++0x1f,0xa3,0xe0,0x04,0xf0,0x90,0x9e,0x26,0xe0,0xff,0x90,0x9e,0x24,0xe0,0x6f,0x60,
++0x08,0x90,0x9e,0x23,0xe0,0x14,0xf0,0x80,0x87,0x90,0x9e,0x26,0xe0,0xff,0x90,0x9e,
++0x24,0xe0,0xc3,0x9f,0x50,0x0d,0x90,0x9e,0x23,0xe0,0xb5,0x05,0x06,0x90,0x9e,0x27,
++0xe0,0xf5,0x1f,0xe5,0x1f,0x25,0xe0,0x24,0x9e,0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83,
++0xe4,0x93,0xfe,0x74,0x01,0x93,0xff,0xe5,0x1f,0x25,0xe0,0x24,0x66,0xf5,0x82,0xe4,
++0x34,0x41,0xf5,0x83,0x74,0x01,0x93,0x2f,0xff,0xe4,0x93,0x3e,0xc3,0x13,0xfe,0xef,
++0x13,0xff,0xec,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xee,0xf0,
++0xa3,0xef,0xf0,0xaf,0x04,0xad,0x1f,0x51,0xa5,0xaf,0x1f,0x22,0xad,0x07,0xed,0xc3,
++0x94,0x20,0x50,0x0d,0x74,0x84,0x2d,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0,0x80,
++0x0b,0x74,0xa6,0x2d,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0x54,0x7f,0xf5,0x1f,
++0xe5,0x1f,0x54,0x1f,0xfc,0x75,0xf0,0x09,0xed,0x90,0x96,0x48,0x12,0x43,0x5f,0xe0,
++0xff,0x90,0x9e,0x23,0xf0,0xed,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,
++0x83,0xe0,0xfb,0xa3,0xe0,0x90,0x9e,0x24,0xcb,0xf0,0xa3,0xeb,0xf0,0xed,0x25,0xe0,
++0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe0,0xfb,0xa3,0xe0,0x90,0x9e,0x26,
++0xcb,0xf0,0xa3,0xeb,0xf0,0xec,0x25,0xe0,0x24,0x66,0xf5,0x82,0xe4,0x34,0x41,0xf5,
++0x83,0xe4,0x93,0xfa,0x74,0x01,0x93,0xfb,0xed,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,
++0x34,0x95,0xf5,0x83,0xea,0xf0,0xa3,0xeb,0xf0,0xec,0xc3,0x9f,0x40,0x02,0xc1,0x7a,
++0x74,0x67,0x2d,0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0xec,0xf0,0x04,0xfb,0x90,0x9e,
++0x23,0xe0,0xff,0xeb,0xd3,0x9f,0x40,0x02,0xc1,0xab,0xeb,0xc3,0x94,0x10,0x40,0x21,
++0xeb,0x24,0xf0,0xff,0x74,0x01,0x7e,0x00,0xa8,0x07,0x08,0x80,0x05,0xc3,0x33,0xce,
++0x33,0xce,0xd8,0xf9,0xff,0x90,0x9e,0x24,0xe0,0x5e,0xfe,0xa3,0xe0,0x5f,0x4e,0x70,
++0x23,0xeb,0xc3,0x94,0x10,0x50,0x40,0x74,0x01,0x7e,0x00,0xa8,0x03,0x08,0x80,0x05,
++0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x9e,0x26,0xe0,0x5e,0xfe,0xa3,0xe0,
++0x5f,0x4e,0x60,0x23,0xbb,0x11,0x09,0x90,0x9e,0x25,0xe0,0x30,0xe7,0x02,0x7b,0x17,
++0xeb,0x64,0x13,0x60,0x03,0xbb,0x12,0x09,0x90,0x9e,0x24,0xe0,0x30,0xe0,0x02,0x7b,
++0x18,0xac,0x03,0x8c,0x1f,0x80,0x34,0x0b,0x80,0x84,0x90,0x9e,0x23,0xe0,0xfb,0x6c,
++0x70,0x69,0x74,0x67,0x2d,0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0xec,0xf0,0x75,0xf0,
++0x09,0xed,0x90,0x96,0x4a,0x12,0x43,0x5f,0xe0,0xb4,0x01,0x0c,0xe5,0x1f,0x20,0xe6,
++0x07,0xec,0x44,0x40,0xf5,0x1f,0x80,0x03,0xaf,0x1f,0x22,0xec,0x25,0xe0,0x24,0x9e,
++0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83,0xe4,0x93,0xfe,0x74,0x01,0x93,0xff,0xec,0x25,
++0xe0,0x24,0x66,0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83,0x74,0x01,0x93,0x2f,0xff,0xe4,
++0x93,0x3e,0xc3,0x13,0xfe,0xef,0x13,0xff,0xed,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,
++0x34,0x95,0xf5,0x83,0xee,0xf0,0xa3,0xef,0xf0,0x80,0x5b,0xec,0xd3,0x9b,0x40,0x56,
++0x90,0x9e,0x23,0xe0,0xff,0x74,0x67,0x2d,0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0xef,
++0xf0,0xac,0x07,0x8f,0x1f,0xec,0x25,0xe0,0x24,0x9e,0xf5,0x82,0xe4,0x34,0x41,0xf5,
++0x83,0xe4,0x93,0xfe,0x74,0x01,0x93,0xff,0xec,0x25,0xe0,0x24,0x66,0xf5,0x82,0xe4,
++0x34,0x41,0xf5,0x83,0x74,0x01,0x93,0x2f,0xff,0xe4,0x93,0x3e,0xc3,0x13,0xfe,0xef,
++0x13,0xff,0xed,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xee,0xf0,
++0xa3,0xef,0xf0,0xaf,0x1f,0x22,0x74,0x01,0x2d,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83,
++0xe4,0xf0,0xaf,0x05,0xe5,0x1f,0x44,0x80,0xfd,0x51,0xa5,0xe5,0x1f,0x44,0x80,0xff,
++0x22,0xef,0xc3,0x94,0x20,0x50,0x39,0xef,0x30,0xe0,0x17,0xed,0xc4,0x54,0xf0,0xfd,
++0xef,0xc3,0x13,0xfe,0x24,0xa4,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0,0x54,0x0f,
++0x80,0x10,0xef,0xc3,0x13,0xfe,0x24,0xa4,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0,
++0x54,0xf0,0xf0,0x74,0xa4,0x2e,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0,0x4d,0xf0,
++0x22,0xe4,0xf5,0x14,0xe5,0x14,0xb4,0x20,0x14,0x90,0x9a,0xc5,0xe0,0x04,0xf0,0x90,
++0x95,0x01,0xe0,0xff,0x90,0x9a,0xc5,0xe0,0xb5,0x07,0x02,0xe4,0xf0,0x75,0xf0,0x09,
++0xe5,0x14,0x90,0x96,0x4b,0x12,0x43,0x5f,0xe0,0x64,0x01,0x60,0x03,0x02,0x6e,0x6a,
++0xe5,0x14,0x25,0xe0,0x24,0x80,0xf5,0x82,0xe4,0x34,0x93,0xf5,0x83,0xe0,0xfe,0xa3,
++0xe0,0xd3,0x94,0x00,0xee,0x94,0x00,0x50,0x03,0x02,0x6e,0x6a,0xe5,0x14,0x94,0x20,
++0x40,0x09,0x90,0x9a,0xc5,0xe0,0x60,0x03,0x02,0x6e,0x76,0xe5,0x14,0x75,0xf0,0x0a,
++0xa4,0x24,0x00,0xf9,0x74,0x90,0x35,0xf0,0x75,0x18,0x01,0xf5,0x19,0x89,0x1a,0xe5,
++0x14,0x25,0xe0,0x24,0x80,0xf5,0x82,0xe4,0x34,0x93,0xf5,0x83,0xe0,0xff,0xa3,0xe0,
++0x90,0x9e,0x1b,0xcf,0xf0,0xa3,0xef,0xf0,0xe5,0x14,0x25,0xe0,0x24,0xc4,0xf5,0x82,
++0xe4,0x34,0x98,0xf5,0x83,0xe0,0xff,0xa3,0xe0,0x90,0x9e,0x1d,0xcf,0xf0,0xa3,0xef,
++0xf0,0xe5,0x14,0xc3,0x94,0x20,0x50,0x14,0x74,0x84,0x25,0x14,0xf5,0x82,0xe4,0x34,
++0x04,0xf5,0x83,0xe0,0x54,0x3f,0x90,0x9e,0x19,0xf0,0x80,0x12,0x74,0xa6,0x25,0x14,
++0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0x54,0x3f,0x90,0x9e,0x19,0xf0,0x90,0x9e,
++0x19,0xe0,0xfe,0x54,0x1f,0xa3,0xf0,0x75,0xf0,0x09,0xe5,0x14,0x90,0x96,0x48,0x12,
++0x43,0x5f,0xe0,0x90,0x9e,0x20,0xf0,0x74,0xe6,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9c,
++0xf5,0x83,0xe0,0xc3,0x94,0x05,0x40,0x02,0x41,0x9f,0x90,0x9e,0x20,0xe0,0xff,0x90,
++0x9e,0x1a,0xe0,0x9f,0x40,0x13,0x90,0x9e,0x20,0xe0,0x90,0x9e,0x1a,0xf0,0xee,0x54,
++0x40,0xfe,0x90,0x9e,0x19,0xf0,0xef,0x4e,0xf0,0x90,0x04,0xfd,0xe0,0x54,0x05,0x64,
++0x01,0x70,0x29,0x90,0x9e,0x1a,0xe0,0xff,0x90,0x41,0x4a,0x93,0xfe,0x74,0x44,0x25,
++0x14,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xc3,0x9e,0x40,0x06,0xef,0x90,0x40,
++0xda,0x80,0x30,0x90,0x9e,0x1a,0xe0,0x90,0x40,0xf6,0x80,0x27,0x90,0x9e,0x1a,0xe0,
++0xff,0x90,0x41,0x4a,0x93,0xfe,0x74,0x44,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9a,0xf5,
++0x83,0xe0,0xc3,0x9e,0x40,0x06,0xef,0x90,0x41,0x12,0x80,0x07,0x90,0x9e,0x1a,0xe0,
++0x90,0x41,0x2e,0x93,0x90,0x9e,0x1f,0xf0,0x90,0x9e,0x1f,0xe0,0x75,0xf0,0x06,0xa4,
++0x24,0x50,0xf9,0x74,0x40,0x35,0xf0,0xfa,0x7b,0xff,0x8b,0x15,0xf5,0x16,0x89,0x17,
++0xe5,0x14,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0,0xf5,0x1b,
++0xa3,0xe0,0xf5,0x1c,0x12,0x29,0xd9,0xff,0x7e,0x00,0xab,0x18,0xaa,0x19,0xa9,0x1a,
++0x12,0x42,0x97,0xfd,0xac,0xf0,0x12,0x29,0xf2,0xef,0x25,0x1c,0xf5,0x1c,0xee,0x35,
++0x1b,0xf5,0x1b,0xab,0x15,0xaa,0x16,0xa9,0x17,0x90,0x00,0x01,0x12,0x42,0x20,0xff,
++0x7e,0x00,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x90,0x00,0x02,0x12,0x42,0xc2,0xfd,0xac,
++0xf0,0x12,0x29,0xf2,0xef,0x25,0x1c,0xf5,0x1c,0xee,0x35,0x1b,0xf5,0x1b,0xab,0x15,
++0xaa,0x16,0xa9,0x17,0x90,0x00,0x02,0x12,0x42,0x20,0xff,0x7e,0x00,0xab,0x18,0xaa,
++0x19,0xa9,0x1a,0x90,0x00,0x04,0x12,0x42,0xc2,0xfd,0xac,0xf0,0x12,0x29,0xf2,0xef,
++0x25,0x1c,0xf5,0x1c,0xee,0x35,0x1b,0xf5,0x1b,0xab,0x15,0xaa,0x16,0xa9,0x17,0x90,
++0x00,0x03,0x12,0x42,0x20,0xff,0x7e,0x00,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x90,0x00,
++0x06,0x12,0x42,0xc2,0xfd,0xac,0xf0,0x12,0x29,0xf2,0xef,0x25,0x1c,0xf5,0x1c,0xee,
++0x35,0x1b,0xf5,0x1b,0xab,0x15,0xaa,0x16,0xa9,0x17,0x90,0x00,0x04,0x12,0x42,0x20,
++0xff,0x7e,0x00,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x90,0x00,0x08,0x12,0x42,0xc2,0xfd,
++0xac,0xf0,0x12,0x29,0xf2,0xef,0x25,0x1c,0xf5,0x1c,0xee,0x35,0x1b,0xf5,0x1b,0xab,
++0x15,0xaa,0x16,0xa9,0x17,0x90,0x00,0x05,0x12,0x42,0x20,0xff,0x7e,0x00,0x90,0x9e,
++0x1b,0xe0,0xfc,0xa3,0xe0,0xfd,0x12,0x29,0xf2,0xd3,0xe5,0x1c,0x9f,0xe5,0x1b,0x9e,
++0x40,0x0c,0xe5,0x1c,0x9f,0xf5,0x1c,0xe5,0x1b,0x9e,0xf5,0x1b,0x80,0x05,0xe4,0xf5,
++0x1b,0xf5,0x1c,0xe5,0x14,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,
++0xe5,0x1b,0xf0,0xa3,0xe5,0x1c,0xf0,0x90,0x9e,0x19,0xe0,0x25,0xe0,0x24,0x66,0xf5,
++0x82,0xe4,0x34,0x41,0xf5,0x83,0xc3,0x74,0x01,0x93,0x95,0x1c,0xe4,0x93,0x95,0x1b,
++0x50,0x07,0xaf,0x14,0x12,0x65,0x5c,0xa1,0x31,0x90,0x9e,0x19,0xe0,0x25,0xe0,0x24,
++0x9e,0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83,0xd3,0x74,0x01,0x93,0x95,0x1c,0xe4,0x93,
++0x95,0x1b,0x50,0x02,0xa1,0x31,0x7d,0x01,0xaf,0x14,0x12,0x63,0xbd,0xa1,0x31,0x74,
++0xe6,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0xfc,0x64,0x05,0x60,0x02,
++0x81,0x3a,0x90,0x96,0x43,0xe0,0xff,0xb4,0x03,0x0b,0x90,0x9e,0x1a,0xe0,0xc3,0x94,
++0x19,0x40,0x3d,0x80,0x2e,0xef,0xb4,0x02,0x0b,0x90,0x9e,0x1a,0xe0,0xc3,0x94,0x11,
++0x40,0x2e,0x80,0x1f,0x90,0x96,0x43,0xe0,0xff,0xb4,0x01,0x0b,0x90,0x9e,0x1a,0xe0,
++0xc3,0x94,0x0a,0x40,0x1b,0x80,0x0c,0xef,0x70,0x11,0x90,0x9e,0x1a,0xe0,0xc3,0x94,
++0x03,0x40,0x0d,0x90,0x9a,0x84,0x74,0x01,0xf0,0x80,0x05,0xe4,0x90,0x9a,0x84,0xf0,
++0x74,0x84,0x25,0x14,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe0,0xf5,0x1e,0x74,0x44,
++0x25,0x14,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xff,0xc3,0x94,0x30,0x50,0x02,
++0x61,0xe7,0x90,0x9a,0x84,0xe0,0x64,0x01,0x60,0x02,0x61,0xe7,0x74,0x85,0x25,0x14,
++0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0x64,0x0a,0x60,0x51,0xef,0x24,0x05,0xff,
++0xe4,0x33,0xfe,0x74,0x41,0x25,0x14,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83,0xe0,0xfd,
++0xd3,0x9f,0xee,0x64,0x80,0xf8,0x74,0x80,0x98,0x50,0x32,0xed,0x24,0x05,0xff,0xe4,
++0x33,0xfe,0x74,0x44,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xd3,0x9f,
++0xee,0x64,0x80,0xf8,0x74,0x80,0x98,0x50,0x14,0x74,0x26,0x25,0x14,0xf5,0x82,0xe4,
++0x34,0x9d,0xf5,0x83,0xe0,0xff,0x90,0x9e,0x1a,0xe0,0x6f,0x60,0x3d,0x74,0x44,0x25,
++0x14,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xff,0xd3,0x94,0x42,0x40,0x05,0x75,
++0x1e,0x05,0x80,0x0e,0xef,0xd3,0x94,0x39,0x40,0x05,0x75,0x1e,0x03,0x80,0x03,0x75,
++0x1e,0x01,0x74,0x41,0x25,0x14,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83,0xef,0xf0,0x74,
++0x85,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9a,0x80,0x29,0x74,0xe6,0x25,0x14,0xf5,0x82,
++0xe4,0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x74,0x85,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9a,
++0xf5,0x83,0xe0,0x04,0xf0,0x80,0x10,0xe4,0xf5,0x1e,0x74,0xe6,0x25,0x14,0xf5,0x82,
++0xe4,0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x90,0x9e,0x1a,0xe0,0xff,0x74,0x26,0x25,0x14,
++0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0xef,0xf0,0x74,0x84,0x25,0x14,0xf5,0x82,0xe4,
++0x34,0x98,0xf5,0x83,0xe5,0x1e,0xf0,0x75,0xf0,0x09,0xe5,0x14,0x90,0x96,0x4c,0x12,
++0x43,0x5f,0xe0,0xb4,0x01,0x10,0xe4,0xf5,0x1e,0x74,0xe6,0x25,0x14,0xf5,0x82,0xe4,
++0x34,0x9c,0xf5,0x83,0xe4,0xf0,0xad,0x1e,0xa1,0x2c,0xec,0x64,0x06,0x60,0x02,0xa1,
++0x31,0xf5,0x1b,0xf5,0x1c,0x90,0x42,0x13,0x93,0xff,0x7e,0x00,0x90,0x9e,0x1b,0xe0,
++0xfc,0xa3,0xe0,0xfd,0x12,0x29,0xf2,0x90,0x9e,0x21,0xee,0xf0,0xa3,0xef,0xf0,0x74,
++0x84,0x25,0x14,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe0,0xf5,0x1e,0xe4,0xf5,0x1d,
++0xab,0x18,0xaa,0x19,0xa9,0x1a,0x75,0xf0,0x02,0xe5,0x1d,0xa4,0xf5,0x82,0x85,0xf0,
++0x83,0x12,0x42,0xc2,0xfd,0xac,0xf0,0xe5,0x1d,0x90,0x42,0x0e,0x93,0xff,0x7e,0x00,
++0x12,0x29,0xf2,0xef,0x25,0x1c,0xf5,0x1c,0xee,0x35,0x1b,0xf5,0x1b,0xc3,0x90,0x9e,
++0x22,0xe0,0x95,0x1c,0x90,0x9e,0x21,0xe0,0x95,0x1b,0x40,0x07,0x05,0x1d,0xe5,0x1d,
++0xb4,0x05,0xbd,0xe5,0x1d,0xc3,0x13,0xf5,0x1d,0xe5,0x1e,0xb4,0x01,0x06,0xe5,0x1d,
++0x70,0x46,0x80,0x13,0xe5,0x1e,0xb4,0x03,0x15,0xe5,0x1d,0x70,0x05,0x75,0x1e,0x03,
++0x80,0x39,0xe5,0x1d,0xb4,0x01,0x05,0x75,0x1e,0x01,0x80,0x2f,0x80,0x2a,0xe5,0x1e,
++0xb4,0x05,0x28,0xe5,0x1d,0x70,0x05,0x75,0x1e,0x05,0x80,0x0d,0xe5,0x1d,0xb4,0x01,
++0x05,0x75,0x1e,0x03,0x80,0x03,0x75,0x1e,0x01,0xd3,0x90,0x9e,0x1e,0xe0,0x94,0x03,
++0x90,0x9e,0x1d,0xe0,0x94,0x00,0x40,0x03,0xe4,0xf5,0x1e,0xd3,0x90,0x9e,0x1e,0xe0,
++0x94,0x03,0x90,0x9e,0x1d,0xe0,0x94,0x00,0x40,0x03,0xe4,0xf5,0x1e,0x74,0x84,0x25,
++0x14,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe5,0x1e,0xf0,0xfd,0xaf,0x14,0x12,0x67,
++0x61,0x74,0xe6,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0xd3,0x94,0x05,
++0x74,0xe6,0x50,0x0e,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0x04,0xf0,
++0x80,0x0b,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x90,0x9e,0x1d,
++0xe0,0xfe,0xa3,0xe0,0xff,0xc3,0x74,0xff,0x9f,0xfd,0x74,0xff,0x9e,0xfc,0xe5,0x14,
++0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xfa,0xa3,0xe0,0xd3,
++0x9d,0xea,0x9c,0xe5,0x14,0x50,0x13,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9a,
++0xf5,0x83,0xee,0x8f,0xf0,0x12,0x42,0x81,0x80,0x10,0x25,0xe0,0x24,0xc6,0xf5,0x82,
++0xe4,0x34,0x9a,0xf5,0x83,0x74,0xff,0xf0,0xa3,0xf0,0xe5,0x14,0x25,0xe0,0x24,0x44,
++0xf5,0x82,0xe4,0x34,0x99,0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0xff,0xc3,0x74,0xff,0x9f,
++0xfd,0x74,0xff,0x9e,0xfc,0xe5,0x14,0x25,0xe0,0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b,
++0xf5,0x83,0xe0,0xfa,0xa3,0xe0,0xd3,0x9d,0xea,0x9c,0xe5,0x14,0x50,0x13,0x25,0xe0,
++0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xee,0x8f,0xf0,0x12,0x42,0x81,0x80,
++0x10,0x25,0xe0,0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0x74,0xff,0xf0,0xa3,
++0xf0,0xab,0x18,0xaa,0x19,0xa9,0x1a,0xe4,0xf5,0xf0,0x12,0x42,0xfa,0xab,0x18,0xaa,
++0x19,0xa9,0x1a,0x90,0x00,0x02,0xe4,0xf5,0xf0,0x12,0x43,0x19,0x90,0x00,0x04,0xe4,
++0xf5,0xf0,0x12,0x43,0x19,0x90,0x00,0x06,0xe4,0xf5,0xf0,0x12,0x43,0x19,0x90,0x00,
++0x08,0xe4,0xf5,0xf0,0x12,0x43,0x19,0xe5,0x14,0x25,0xe0,0x24,0x80,0xf5,0x82,0xe4,
++0x34,0x93,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,0xe5,0x14,0x25,0xe0,0x24,0xc4,0xf5,0x82,
++0xe4,0x34,0x98,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,0xe5,0x14,0x25,0xe0,0x24,0x44,0xf5,
++0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,0x05,0x14,0xe5,0x14,0xc3,0x94,
++0x40,0x50,0x03,0x02,0x67,0xa4,0x22,0x90,0x04,0x44,0x74,0x11,0xf0,0xa3,0x74,0xf0,
++0xf0,0xa3,0x74,0x0f,0xf0,0xa3,0xe4,0xf0,0xfd,0x74,0xa4,0x2d,0xf5,0x82,0xe4,0x34,
++0x04,0xf5,0x83,0xe4,0xf0,0x0d,0xbd,0x10,0xf0,0xe4,0x90,0x9a,0xc5,0xf0,0x90,0x95,
++0x01,0x04,0xf0,0xe4,0xfd,0x75,0xf0,0x0a,0xed,0x90,0x90,0x00,0x12,0x43,0x5f,0xe4,
++0xf0,0xa3,0xf0,0x75,0xf0,0x0a,0xed,0x90,0x90,0x02,0x12,0x43,0x5f,0xe4,0xf0,0xa3,
++0xf0,0x75,0xf0,0x0a,0xed,0x90,0x90,0x04,0x12,0x43,0x5f,0xe4,0xf0,0xa3,0xf0,0x75,
++0xf0,0x0a,0xed,0x90,0x90,0x06,0x12,0x43,0x5f,0xe4,0xf0,0xa3,0xf0,0x75,0xf0,0x0a,
++0xed,0x90,0x90,0x08,0x12,0x43,0x5f,0xe4,0xf0,0xa3,0xf0,0x74,0x26,0x2d,0xf5,0x82,
++0xe4,0x34,0x9d,0xf5,0x83,0x74,0x13,0xf0,0x74,0x85,0x2d,0xf5,0x82,0xe4,0x34,0x9a,
++0xf5,0x83,0xe4,0xf0,0x74,0x84,0x2d,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe4,0xf0,
++0xed,0x25,0xe0,0x24,0x80,0xf5,0x82,0xe4,0x34,0x93,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,
++0xed,0x25,0xe0,0x24,0xc4,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,
++0xed,0x25,0xe0,0x24,0xc4,0xf5,0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,
++0xed,0x25,0xe0,0x24,0x44,0xf5,0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,
++0xed,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,
++0xed,0x25,0xe0,0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,
++0x74,0x86,0x2d,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x74,0x46,0x2d,0xf5,
++0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x74,0xe6,0x2d,0xf5,0x82,0xe4,0x34,0x9c,
++0xf5,0x83,0xe4,0xf0,0x90,0x41,0xc4,0x93,0xfe,0x74,0x01,0x93,0xff,0x90,0x41,0x8c,
++0x74,0x01,0x93,0x2f,0xff,0xe4,0x93,0x3e,0xc3,0x13,0xfe,0xef,0x13,0xff,0xed,0x25,
++0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xee,0xf0,0xa3,0xef,0xf0,0x75,
++0xf0,0x09,0xed,0x90,0x96,0x4b,0x12,0x43,0x5f,0x74,0x01,0xf0,0x75,0xf0,0x09,0xed,
++0x90,0x96,0x4a,0x12,0x43,0x5f,0x74,0x01,0xf0,0x74,0x82,0x2d,0xf5,0x82,0xe4,0x34,
++0x95,0xf5,0x83,0x74,0x0c,0xf0,0x75,0xf0,0x09,0xed,0x90,0x96,0x46,0x12,0x43,0x5f,
++0x74,0xff,0xf0,0xa3,0xf0,0x75,0xf0,0x09,0xed,0x90,0x96,0x44,0x12,0x43,0x5f,0xe4,
++0xf0,0xa3,0x74,0x0f,0xf0,0x75,0xf0,0x09,0xed,0x90,0x96,0x48,0x12,0x43,0x5f,0x74,
++0x13,0xf0,0x75,0xf0,0x09,0xed,0x90,0x96,0x49,0x12,0x43,0x5f,0xe4,0xf0,0xed,0xc3,
++0x94,0x20,0x50,0x0f,0x74,0x84,0x2d,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0x74,0x13,
++0xf0,0x80,0x0d,0x74,0xa6,0x2d,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0x74,0x13,0xf0,
++0x0d,0xed,0x64,0x40,0x60,0x03,0x02,0x6e,0xa5,0x22,0x12,0x29,0xd9,0xf5,0x14,0xc3,
++0x94,0x40,0x50,0x15,0x90,0x00,0x02,0x12,0x42,0x20,0xff,0x74,0x44,0x25,0x14,0xf5,
++0x82,0xe4,0x34,0x9a,0xf5,0x83,0xef,0xf0,0x22,0xe5,0x14,0xb4,0x40,0x0a,0x90,0x00,
++0x02,0x12,0x42,0x20,0x90,0x96,0x42,0xf0,0x22,0x90,0x9e,0x30,0x12,0x43,0x8b,0x90,
++0x9e,0x33,0xe0,0x54,0xf0,0x44,0x02,0xf0,0x54,0x0f,0x44,0xc0,0xf0,0x90,0x9e,0x30,
++0x12,0x43,0x6b,0x90,0x9e,0x90,0x12,0x43,0x8b,0x7b,0x01,0x7a,0x9e,0x79,0x33,0x02,
++0x53,0xf1,0x90,0x00,0x02,0x12,0x42,0x20,0xfd,0x90,0x00,0x01,0x12,0x42,0x20,0xfc,
++0xed,0xc3,0x94,0x40,0x40,0x02,0xe4,0xfd,0xec,0xc3,0x94,0x40,0x40,0x02,0xe4,0xfc,
++0xed,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xfa,0xa3,0xe0,
++0xfb,0xea,0x90,0x9e,0x24,0xf0,0xeb,0xa3,0xf0,0xed,0x25,0xe0,0x24,0x46,0xf5,0x82,
++0xe4,0x34,0x9b,0xf5,0x83,0xe0,0xfa,0xa3,0xe0,0xfb,0xea,0x90,0x9e,0x26,0xf0,0xeb,
++0xa3,0xf0,0xa3,0xed,0xf0,0xa3,0x74,0xff,0xf0,0xec,0x25,0xe0,0x24,0xc6,0xf5,0x82,
++0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xfa,0xa3,0xe0,0xfb,0xea,0x90,0x9e,0x2a,0xf0,0xeb,
++0xa3,0xf0,0xec,0x25,0xe0,0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe0,0xfa,
++0xa3,0xe0,0xfb,0xea,0x90,0x9e,0x2c,0xf0,0xeb,0xa3,0xf0,0xa3,0xec,0xf0,0xa3,0x74,
++0xff,0xf0,0xed,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe4,0xf0,
++0xa3,0xf0,0xed,0x25,0xe0,0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe4,0xf0,
++0xa3,0xf0,0xec,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe4,0xf0,
++0xa3,0xf0,0xec,0x25,0xe0,0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe4,0xf0,
++0xa3,0xf0,0x7b,0x01,0x7a,0x9e,0x79,0x24,0x01,0x79,0xd3,0x10,0xaf,0x01,0xc3,0xc0,
++0xd0,0x90,0x9e,0xa4,0xee,0xf0,0xa3,0xef,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0x90,0x9e,
++0xa4,0xe0,0xfe,0xa3,0xe0,0xf5,0x82,0x8e,0x83,0xe0,0x60,0x2d,0xc3,0x90,0x9e,0xa7,
++0xe0,0x94,0xe8,0x90,0x9e,0xa6,0xe0,0x94,0x03,0x40,0x0b,0x90,0x01,0xc6,0xe0,0x44,
++0x10,0xf0,0x7f,0x00,0x80,0x15,0x90,0x9e,0xa6,0xe4,0x75,0xf0,0x01,0x12,0x42,0x81,
++0x7f,0x0a,0x7e,0x00,0x12,0x37,0x54,0x80,0xc5,0x7f,0x01,0xd0,0xd0,0x92,0xaf,0x22,
++0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x24,0x12,0x2a,0x8b,0x00,0x00,0x00,
++0x00,0x90,0x00,0x01,0x12,0x42,0x20,0x90,0x9e,0x66,0xf0,0x90,0x00,0x03,0x12,0x42,
++0x20,0x90,0x9e,0x55,0xf0,0x12,0x56,0x22,0x90,0x01,0xe5,0xe5,0x63,0xf0,0x90,0x9e,
++0x66,0xe0,0x90,0x01,0xe6,0xf0,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x00,0x02,0x12,0x42,
++0x20,0xff,0x30,0xe0,0x25,0x12,0x29,0xd9,0x90,0x9e,0x5c,0xf0,0x90,0x00,0x01,0x12,
++0x42,0x20,0x90,0x9e,0x5d,0xf0,0xef,0xc3,0x13,0x54,0x7f,0x90,0x9e,0x5b,0xf0,0x90,
++0x00,0x03,0x12,0x42,0x20,0x90,0x9e,0x62,0xf0,0x22,0x90,0x9e,0x5c,0x74,0x0a,0xf0,
++0x90,0x9e,0x5d,0x74,0x05,0xf0,0x90,0x9e,0x5b,0x74,0x14,0xf0,0x90,0x9e,0x62,0x74,
++0x05,0xf0,0x22,0x12,0x29,0xd9,0x30,0xe0,0x19,0xc3,0x13,0x54,0x7f,0x90,0x9e,0x61,
++0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0xff,0x90,0x9e,0x5f,0xe4,0xf0,0xa3,0xef,0xf0,
++0x80,0x0f,0x90,0x9e,0x61,0x74,0x07,0xf0,0x90,0x9e,0x5f,0xe4,0xf0,0xa3,0x74,0x03,
++0xf0,0x90,0x9e,0x5f,0xe0,0xa3,0xe0,0x90,0x05,0x58,0xf0,0x22,0x90,0x9e,0x24,0x12,
++0x2a,0x8b,0x00,0x00,0x00,0x00,0x12,0x29,0xd9,0x60,0x0d,0x90,0x9e,0x5e,0xf0,0xe4,
++0xfd,0x7f,0x04,0x12,0x54,0xe7,0x80,0x05,0xe4,0x90,0x9e,0x5e,0xf0,0x90,0x9e,0x5e,
++0xe0,0x90,0x01,0xe7,0xf0,0x22,0x90,0x02,0x09,0xe0,0xfd,0x12,0x29,0xd9,0xfe,0xaf,
++0x05,0xed,0x2e,0x90,0x9e,0x78,0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0xff,0xed,0x2f,
++0x90,0x9e,0x79,0xf0,0x90,0x00,0x02,0x12,0x42,0x20,0xff,0xed,0x2f,0x90,0x9e,0x7a,
++0xf0,0x90,0x00,0x03,0x12,0x42,0x20,0xff,0xed,0x2f,0x90,0x9e,0x7b,0xf0,0x90,0x00,
++0x04,0x12,0x42,0x20,0xff,0xae,0x05,0xed,0x2f,0x90,0x9e,0x7c,0xf0,0x22,0xd3,0x10,
++0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x24,0x12,0x43,0x8b,0x90,0x9e,0x24,0x12,0x43,
++0x6b,0x90,0x00,0x01,0x12,0x42,0xc2,0xfa,0xe5,0xf0,0x24,0x00,0xff,0xe4,0x3a,0xfe,
++0x90,0x9e,0x24,0x12,0x43,0x6b,0x90,0x00,0x01,0xee,0x8f,0xf0,0x12,0x43,0x19,0x12,
++0x29,0xd9,0xff,0x60,0x2d,0xb5,0x65,0x16,0x90,0x9e,0x24,0x12,0x43,0x6b,0x90,0x00,
++0x01,0x12,0x42,0xc2,0x65,0x67,0x70,0x04,0xe5,0x66,0x65,0xf0,0x60,0x24,0x90,0x9e,
++0x24,0x12,0x43,0x6b,0x90,0x00,0x01,0x12,0x42,0xc2,0xff,0xae,0xf0,0x12,0x4e,0x37,
++0x80,0x10,0x90,0x9e,0x24,0x12,0x43,0x6b,0x12,0x29,0xd9,0x65,0x65,0x60,0x03,0x12,
++0x44,0xc2,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x06,0x34,0x74,0xff,0xf0,0xe4,0xa3,0xf0,
++0xa3,0xf0,0xa3,0xf0,0x22,0x90,0x06,0x34,0xe0,0x60,0x24,0x14,0x70,0x1a,0x7b,0x01,
++0x7a,0x06,0x79,0x35,0x7f,0xf9,0x7e,0x01,0x71,0xb0,0xbf,0x01,0x09,0x90,0x06,0x35,
++0xe0,0x54,0x0f,0xf0,0x80,0x04,0x80,0x00,0x80,0xcd,0xe4,0x90,0x06,0x34,0xf0,0x22,
++0x8e,0x14,0x8f,0x15,0x8b,0x16,0x8a,0x17,0x89,0x18,0xe4,0x90,0x9e,0x19,0xf0,0xef,
++0x90,0x00,0x31,0xf0,0x12,0x4d,0x45,0xe5,0x14,0x54,0x03,0xff,0x90,0x00,0x32,0xe0,
++0x54,0xfc,0x4f,0xf0,0x12,0x4d,0x45,0x90,0x00,0x33,0xe0,0x54,0x7f,0xf0,0x12,0x4d,
++0x45,0x90,0x00,0x33,0xe0,0x20,0xe7,0x0e,0x90,0x9e,0x19,0xe0,0xc3,0x94,0x64,0x50,
++0x05,0xe0,0x04,0xf0,0x80,0xeb,0x90,0x9e,0x19,0xe0,0xc3,0x94,0x64,0x50,0x10,0x90,
++0x00,0x30,0xe0,0xab,0x16,0xaa,0x17,0xa9,0x18,0x12,0x42,0x4d,0x7f,0x01,0x22,0x7f,
++0x00,0x22,0xe4,0x90,0x9e,0xac,0xf0,0xa3,0xf0,0x90,0x05,0xf8,0xe0,0x70,0x0f,0xa3,
++0xe0,0x70,0x0b,0xa3,0xe0,0x70,0x07,0xa3,0xe0,0x70,0x03,0x7f,0x01,0x22,0xd3,0x90,
++0x9e,0xad,0xe0,0x94,0xe8,0x90,0x9e,0xac,0xe0,0x94,0x03,0x40,0x03,0x7f,0x00,0x22,
++0x7f,0x32,0x7e,0x00,0x12,0x37,0x54,0x90,0x9e,0xac,0xe4,0x75,0xf0,0x01,0x12,0x42,
++0x81,0x80,0xc6,0x90,0x00,0x11,0xe0,0x44,0x09,0xf0,0x12,0x4d,0x45,0x90,0x9d,0xff,
++0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x78,0x7e,0x08,0x12,0x2f,0xd9,
++0x90,0x9e,0x03,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0c,
++0x12,0x2f,0xd9,0x90,0x9e,0x07,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,
++0x00,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x9e,0x0b,0x12,0x43,0x53,0x90,0x80,0x85,0x12,
++0x2a,0x7f,0x7f,0x70,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x59,0x12,0x2a,0x8b,0x00,
++0x03,0x2d,0x95,0xe4,0xfd,0xff,0x12,0x34,0x81,0x90,0x9e,0x80,0xe0,0xb4,0x01,0x11,
++0x90,0x80,0x59,0x12,0x2a,0x8b,0x00,0x03,0x2d,0x95,0xe4,0xfd,0x7f,0x01,0x12,0x34,
++0x81,0x22,0x7f,0x78,0x7e,0x08,0x12,0x27,0xde,0x90,0x9d,0xff,0x12,0x2a,0x7f,0x7f,
++0x04,0x7e,0x0c,0x12,0x27,0xde,0x90,0x9e,0x03,0x12,0x2a,0x7f,0x7f,0x00,0x7e,0x08,
++0x12,0x27,0xde,0x90,0x9e,0x07,0x12,0x2a,0x7f,0x90,0x9e,0x80,0xe0,0x90,0x9d,0xff,
++0xb4,0x01,0x0d,0x12,0x43,0x53,0xef,0x54,0xc7,0xff,0xed,0x54,0xc7,0xfd,0x80,0x07,
++0x12,0x43,0x53,0xef,0x54,0xc7,0xff,0xec,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x78,
++0x7e,0x08,0x12,0x2f,0xd9,0x90,0x9e,0x03,0x12,0x43,0x53,0xef,0x54,0x0f,0xff,0xec,
++0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x2f,0xd9,0x90,0x9e,0x07,
++0x12,0x43,0x53,0xef,0x44,0x02,0xff,0xec,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x00,
++0x7e,0x08,0x12,0x2f,0xd9,0x7f,0x70,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9e,0x0b,0x12,
++0x2a,0x7f,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x1b,0x25,0xa0,0x7f,0x70,0x7e,0x0e,
++0x12,0x2f,0xd9,0x90,0x80,0x59,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe4,0xfd,0xff,
++0x12,0x34,0x81,0x90,0x9e,0x80,0xe0,0xb4,0x01,0x11,0x90,0x80,0x59,0x12,0x2a,0x8b,
++0x00,0x00,0x00,0x00,0xe4,0xfd,0x7f,0x01,0x12,0x34,0x81,0x90,0x00,0x11,0xe0,0x54,
++0xf6,0xf0,0x02,0x4d,0x45,0xef,0x70,0x02,0xe1,0x5c,0x90,0x9e,0x0f,0xe0,0x60,0x03,
++0x02,0x7b,0x28,0x90,0x9d,0xfb,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,
++0x8c,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x9d,0xa7,0x12,0x43,0x53,0x90,0x80,0x85,0x12,
++0x2a,0x7f,0x7f,0x44,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x9d,0xab,0x12,0x43,0x53,0x90,
++0x80,0x85,0x12,0x2a,0x7f,0x7f,0x5c,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x9d,0xaf,0x12,
++0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x6c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,
++0x9d,0xb3,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x70,0x7e,0x0e,0x12,
++0x2f,0xd9,0x90,0x9d,0xb7,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x74,
++0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xbb,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,
++0x7f,0x7f,0x78,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xbf,0x12,0x43,0x53,0x90,0x80,
++0x85,0x12,0x2a,0x7f,0x7f,0x7c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xc3,0x12,0x43,
++0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,
++0xc7,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x84,0x7e,0x0e,0x12,0x2f,
++0xd9,0x90,0x9d,0xcb,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x88,0x7e,
++0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xcf,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,
++0x7f,0x8c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xd3,0x12,0x43,0x53,0x90,0x80,0x85,
++0x12,0x2a,0x7f,0x7f,0xd0,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xd7,0x12,0x43,0x53,
++0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0xd4,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xdb,
++0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0xd8,0x7e,0x0e,0x12,0x2f,0xd9,
++0x90,0x9d,0xdf,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0xdc,0x7e,0x0e,
++0x12,0x2f,0xd9,0x90,0x9d,0xe3,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,
++0xe0,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xe7,0x12,0x43,0x53,0x90,0x80,0x85,0x12,
++0x2a,0x7f,0x7f,0xec,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xeb,0x12,0x43,0x53,0x90,
++0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x2f,0xd9,0x90,0x9d,0xef,0x12,
++0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0d,0x12,0x2f,0xd9,0x90,
++0x9d,0xf3,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x0c,0x7e,0x09,0x12,
++0x2f,0xd9,0x90,0x9d,0xf7,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,
++0x7e,0x08,0x12,0x2f,0xd9,0x90,0x9e,0x0f,0x74,0x01,0xf0,0x22,0x90,0x9e,0x0f,0xe0,
++0x64,0x01,0x60,0x03,0x02,0x7b,0x28,0x7f,0x8c,0x7e,0x08,0x12,0x27,0xde,0x90,0x9d,
++0xfb,0x12,0x2a,0x7f,0x7f,0x44,0x7e,0x08,0x12,0x27,0xde,0x90,0x9d,0xa7,0x12,0x2a,
++0x7f,0x7f,0x5c,0x7e,0x08,0x12,0x27,0xde,0x90,0x9d,0xab,0x12,0x2a,0x7f,0x7f,0x6c,
++0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xaf,0x12,0x2a,0x7f,0x7f,0x70,0x7e,0x0e,0x12,
++0x27,0xde,0x90,0x9d,0xb3,0x12,0x2a,0x7f,0x7f,0x74,0x7e,0x0e,0x12,0x27,0xde,0x90,
++0x9d,0xb7,0x12,0x2a,0x7f,0x7f,0x78,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xbb,0x12,
++0x2a,0x7f,0x7f,0x7c,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xbf,0x12,0x2a,0x7f,0x7f,
++0x80,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xc3,0x12,0x2a,0x7f,0x7f,0x84,0x7e,0x0e,
++0x12,0x27,0xde,0x90,0x9d,0xc7,0x12,0x2a,0x7f,0x7f,0x88,0x7e,0x0e,0x12,0x27,0xde,
++0x90,0x9d,0xcb,0x12,0x2a,0x7f,0x7f,0x8c,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xcf,
++0x12,0x2a,0x7f,0x7f,0xd0,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xd3,0x12,0x2a,0x7f,
++0x7f,0xd4,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xd7,0x12,0x2a,0x7f,0x7f,0xd8,0x7e,
++0x0e,0x12,0x27,0xde,0x90,0x9d,0xdb,0x12,0x2a,0x7f,0x7f,0xdc,0x7e,0x0e,0x12,0x27,
++0xde,0x90,0x9d,0xdf,0x12,0x2a,0x7f,0x7f,0xe0,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,
++0xe3,0x12,0x2a,0x7f,0x7f,0xec,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xe7,0x12,0x2a,
++0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x27,0xde,0x90,0x9d,0xeb,0x12,0x2a,0x7f,0x7f,0x04,
++0x7e,0x0d,0x12,0x27,0xde,0x90,0x9d,0xef,0x12,0x2a,0x7f,0x7f,0x0c,0x7e,0x09,0x12,
++0x27,0xde,0x90,0x9d,0xf3,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x08,0x12,0x27,0xde,0x90,
++0x9d,0xf7,0x12,0x2a,0x7f,0x7f,0x8c,0x7e,0x08,0x12,0x27,0xde,0x90,0x9e,0xa8,0x12,
++0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xed,0x44,0xc0,0xfd,0xec,0x90,0x9e,0xa8,
++0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,
++0x8c,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x01,0x00,0x00,
++0x7f,0x44,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0xdb,0x25,
++0xa4,0x7f,0x5c,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,
++0x25,0xa4,0x7f,0x6c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,
++0xdb,0x25,0xa4,0x7f,0x70,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,
++0x04,0x1b,0x25,0xa4,0x7f,0x74,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,
++0x8b,0x04,0x1b,0x25,0xa4,0x7f,0x78,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,
++0x2a,0x8b,0x04,0x1b,0x25,0xa4,0x7f,0x7c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,
++0x12,0x2a,0x8b,0x04,0x1b,0x25,0xa4,0x7f,0x80,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,
++0x85,0x12,0x2a,0x8b,0x63,0xdb,0x25,0xa4,0x7f,0x84,0x7e,0x0e,0x12,0x2f,0xd9,0x90,
++0x80,0x85,0x12,0x2a,0x8b,0x04,0x1b,0x25,0xa4,0x7f,0x88,0x7e,0x0e,0x12,0x2f,0xd9,
++0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0x8c,0x7e,0x0e,0x12,0x2f,
++0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0xd0,0x7e,0x0e,0x12,
++0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0xd4,0x7e,0x0e,
++0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0xd8,0x7e,
++0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x1b,0x25,0xa4,0x7f,0xdc,
++0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x1b,0x25,0xa4,0x7f,
++0xe0,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x24,0xdb,0x25,0xa4,
++0x7f,0xec,0x7e,0x0e,0x12,0x2f,0xd9,0x7f,0x04,0x7e,0x0c,0x12,0x27,0xde,0x90,0x9e,
++0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xe4,0xff,0xec,0x90,0x9e,0xa8,
++0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xef,0x44,0x11,0xff,0xec,0x90,0x9e,
++0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,
++0x7f,0x04,0x7e,0x0c,0x12,0x2f,0xd9,0x7f,0x04,0x7e,0x0d,0x12,0x27,0xde,0x90,0x9e,
++0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xef,0x54,0xf0,0xff,0xec,0x90,
++0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xef,0x44,0x01,0xff,0xec,
++0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0x90,0x80,0x85,0x12,
++0x2a,0x7f,0x7f,0x04,0x7e,0x0d,0x12,0x2f,0xd9,0x7f,0x0c,0x7e,0x09,0x12,0x27,0xde,
++0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xe4,0xff,0xec,0x90,
++0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xef,0x44,0x11,0xff,0xec,
++0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0x90,0x80,0x85,0x12,
++0x2a,0x7f,0x7f,0x0c,0x7e,0x09,0x12,0x2f,0xd9,0x7f,0x0c,0x7e,0x09,0x12,0x27,0xde,
++0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xed,0x54,0x0f,0xfd,
++0xec,0x54,0xf0,0xfc,0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,
++0xed,0x44,0x10,0xfd,0xec,0x44,0x01,0xfc,0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e,
++0xa8,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x0c,0x7e,0x09,0x12,0x2f,
++0xd9,0x7f,0x04,0x7e,0x08,0x12,0x27,0xde,0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e,
++0xa8,0x12,0x43,0x53,0xef,0x54,0xf0,0xff,0xec,0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90,
++0x9e,0xa8,0x12,0x43,0x53,0xef,0x44,0x01,0xff,0xec,0x90,0x9e,0xa8,0x12,0x2a,0x7f,
++0x90,0x9e,0xa8,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x08,
++0x12,0x2f,0xd9,0xe4,0x90,0x9e,0x0f,0xf0,0x22,0x90,0x00,0x02,0x12,0x42,0x20,0x90,
++0x9e,0x43,0xf0,0xe0,0x60,0x04,0xe0,0xf4,0x70,0x21,0xa2,0xaf,0xe4,0x33,0xf5,0x14,
++0xc2,0xaf,0x90,0x00,0x47,0xe0,0x54,0xfb,0xfd,0x7f,0x47,0x12,0x49,0x05,0x7d,0x40,
++0x7f,0x01,0x12,0x36,0xaf,0xe5,0x14,0x24,0xff,0x92,0xaf,0x22,0x90,0x9e,0x3a,0xe0,
++0xc3,0x94,0x14,0x50,0x05,0xe0,0x04,0xf0,0x81,0x14,0x90,0x9e,0x3a,0xe0,0x64,0x14,
++0x60,0x02,0x81,0x14,0x90,0x9e,0x49,0xe0,0x70,0x25,0x90,0x9e,0x4c,0xe0,0x70,0x1f,
++0x90,0x9e,0x4a,0xe0,0x70,0x19,0x90,0x9e,0x4d,0xe0,0x70,0x13,0x90,0x9e,0x4b,0xe0,
++0x70,0x0d,0x90,0x9e,0x4e,0xe0,0x70,0x07,0x90,0x04,0xfd,0xe0,0x54,0xfe,0xf0,0x90,
++0x9e,0x49,0xe0,0x90,0x04,0x44,0xf0,0x90,0x9e,0x4a,0xe0,0x90,0x04,0x45,0xf0,0x90,
++0x9e,0x4b,0xe0,0x90,0x04,0x46,0xf0,0xa3,0xe4,0xf0,0x90,0x9e,0x4c,0xe0,0x90,0x04,
++0x48,0xf0,0x90,0x9e,0x4d,0xe0,0x90,0x04,0x49,0xf0,0x90,0x9e,0x4e,0xe0,0x90,0x04,
++0x4a,0xf0,0xa3,0xe4,0xf0,0x90,0x9e,0x35,0xe0,0x90,0x04,0x4c,0xf0,0x90,0x9e,0x36,
++0xe0,0x90,0x04,0x4d,0xf0,0x90,0x9e,0x37,0xe0,0x90,0x04,0x4e,0xf0,0x90,0x9e,0x38,
++0xe0,0x90,0x04,0x4f,0xf0,0xe4,0x90,0x9e,0x3a,0xf0,0x90,0x9e,0x35,0x04,0xf0,0xe4,
++0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x9e,0x49,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,
++0xa3,0xf0,0xa3,0xf0,0x90,0x05,0x60,0xe0,0x90,0x9e,0x19,0xf0,0x90,0x05,0x61,0xe0,
++0x90,0x9e,0x1a,0xf0,0x90,0x05,0x62,0xe0,0x90,0x9e,0x1b,0xf0,0x90,0x05,0x63,0xe0,
++0x90,0x9e,0x1c,0xf0,0x90,0x9e,0x52,0xe0,0xff,0x90,0x9e,0x1c,0xe0,0xfe,0xd3,0x9f,
++0x50,0x0b,0x90,0x9e,0x52,0xe0,0xc3,0x9e,0xd3,0x94,0x01,0x40,0x11,0x90,0x9e,0x40,
++0xe0,0xb4,0x01,0x02,0x80,0x03,0x90,0x9e,0x44,0xe0,0xff,0x12,0x4c,0xf0,0x22,0x90,
++0x9e,0x53,0xe0,0x64,0x01,0x60,0x08,0x90,0x9e,0x41,0xe0,0x60,0x02,0xa1,0x36,0x90,
++0x9e,0x35,0xe0,0xc3,0x94,0xff,0x50,0x05,0xe0,0x04,0xf0,0x80,0x3b,0x90,0x9e,0x36,
++0xe0,0xc3,0x94,0xff,0x50,0x06,0xe0,0x04,0xf0,0xe4,0x80,0x28,0x90,0x9e,0x37,0xe0,
++0xc3,0x94,0xff,0x50,0x0a,0xe0,0x04,0xf0,0xe4,0x90,0x9e,0x36,0xf0,0x80,0x15,0x90,
++0x9e,0x38,0xe0,0xc3,0x94,0xff,0x50,0x10,0xe0,0x04,0xf0,0xe4,0x90,0x9e,0x37,0xf0,
++0x90,0x9e,0x36,0xf0,0x90,0x9e,0x35,0xf0,0x90,0x00,0x44,0xe0,0x54,0x0c,0x60,0x76,
++0xe0,0x30,0xe2,0x32,0x90,0x9e,0x49,0xe0,0xc3,0x94,0xff,0x50,0x05,0xe0,0x04,0xf0,
++0x80,0x24,0x90,0x9e,0x4a,0xe0,0xc3,0x94,0xff,0x50,0x06,0xe0,0x04,0xf0,0xe4,0x80,
++0x11,0x90,0x9e,0x4b,0xe0,0xc3,0x94,0xff,0x50,0x0c,0xe0,0x04,0xf0,0xe4,0x90,0x9e,
++0x4a,0xf0,0x90,0x9e,0x49,0xf0,0x90,0x00,0x44,0xe0,0x30,0xe3,0x32,0x90,0x9e,0x4c,
++0xe0,0xc3,0x94,0xff,0x50,0x05,0xe0,0x04,0xf0,0x80,0x24,0x90,0x9e,0x4d,0xe0,0xc3,
++0x94,0xff,0x50,0x06,0xe0,0x04,0xf0,0xe4,0x80,0x11,0x90,0x9e,0x4e,0xe0,0xc3,0x94,
++0xff,0x50,0x0c,0xe0,0x04,0xf0,0xe4,0x90,0x9e,0x4d,0xf0,0x90,0x9e,0x4c,0xf0,0x90,
++0x04,0xfd,0xe0,0x44,0x01,0xf0,0x22,0x00,0x37,0xda,};
++
++// =================== v79 UMC A Cut COMMON 2011-10-06 =====================
++u8 Rtl8192CUFwUMCACutImgArray[UMCACutImgArrayLength] = {
++0xc1,0x88,0x02,0x00,0x4f,0x00,0x00,0x00,0x0a,0x06,0x18,0x09,0x58,0x3f,0x01,0x00,
++0x61,0x80,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x02,0x43,0xba,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x02,0x5a,0x45,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x02,0x5f,0xfb,0x00,0x00,0x00,0x00,0x00,0xa1,0xdf,0x00,0x00,0x00,
++0x05,0x04,0x03,0x02,0x00,0x03,0x06,0x05,0x04,0x03,0x00,0x04,0x06,0x05,0x04,0x02,
++0x00,0x04,0x08,0x07,0x06,0x04,0x00,0x06,0x0a,0x09,0x08,0x06,0x00,0x08,0x0a,0x09,
++0x08,0x04,0x00,0x08,0x0a,0x09,0x08,0x02,0x00,0x08,0x0a,0x09,0x08,0x00,0x00,0x08,
++0x12,0x11,0x10,0x08,0x00,0x10,0x1a,0x19,0x18,0x10,0x00,0x18,0x22,0x21,0x20,0x18,
++0x00,0x20,0x22,0x21,0x20,0x10,0x00,0x20,0x22,0x21,0x20,0x08,0x00,0x20,0x22,0x21,
++0x1c,0x08,0x00,0x20,0x22,0x21,0x14,0x08,0x00,0x20,0x22,0x20,0x18,0x08,0x00,0x20,
++0x31,0x30,0x20,0x10,0x00,0x30,0x31,0x30,0x18,0x00,0x00,0x30,0x31,0x2f,0x10,0x10,
++0x00,0x30,0x31,0x2c,0x10,0x10,0x00,0x30,0x31,0x28,0x10,0x00,0x00,0x30,0x31,0x20,
++0x10,0x00,0x00,0x30,0x31,0x10,0x10,0x00,0x00,0x30,0x04,0x04,0x04,0x05,0x04,0x04,
++0x04,0x05,0x05,0x05,0x06,0x06,0x04,0x04,0x04,0x05,0x05,0x05,0x06,0x06,0x04,0x04,
++0x05,0x05,0x05,0x05,0x06,0x06,0x04,0x04,0x05,0x05,0x05,0x05,0x06,0x07,0x0a,0x0b,
++0x0d,0x10,0x04,0x05,0x05,0x06,0x06,0x09,0x0c,0x11,0x08,0x08,0x09,0x09,0x0a,0x0c,
++0x10,0x11,0x04,0x04,0x04,0x05,0x04,0x04,0x05,0x07,0x07,0x07,0x08,0x0a,0x04,0x04,
++0x04,0x04,0x06,0x0a,0x0b,0x0d,0x05,0x05,0x07,0x07,0x08,0x0b,0x0d,0x0f,0x04,0x04,
++0x04,0x05,0x07,0x07,0x09,0x09,0x0c,0x0e,0x10,0x12,0x04,0x04,0x05,0x05,0x06,0x0a,
++0x11,0x13,0x09,0x09,0x09,0x09,0x0c,0x0e,0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x24,0x26,0x2a,0x18,0x1a,0x1d,0x1f,0x21,0x27,0x29,0x2a,0x00,0x00,
++0x00,0x1f,0x23,0x28,0x2a,0x2c,0x00,0x04,0x00,0x04,0x00,0x08,0x00,0x10,0x00,0x18,
++0x00,0x24,0x00,0x30,0x00,0x48,0x00,0x60,0x00,0x90,0x00,0xc0,0x00,0xd8,0x00,0x50,
++0x00,0x78,0x00,0xa0,0x00,0xc8,0x01,0x40,0x01,0x90,0x01,0xe0,0x02,0x30,0x01,0x2c,
++0x01,0x40,0x01,0xe0,0x02,0xd0,0x03,0xe8,0x04,0xb0,0x06,0x40,0x07,0xd0,0x00,0x02,
++0x00,0x02,0x00,0x04,0x00,0x08,0x00,0x0c,0x00,0x12,0x00,0x18,0x00,0x24,0x00,0x30,
++0x00,0x48,0x00,0x60,0x00,0x6c,0x00,0x28,0x00,0x3c,0x00,0x50,0x00,0x64,0x00,0xa0,
++0x00,0xc8,0x00,0xf0,0x01,0x18,0x00,0x64,0x00,0xa0,0x00,0xf0,0x01,0x68,0x01,0xf4,
++0x02,0x58,0x03,0x20,0x03,0xe8,0x02,0x02,0x02,0x02,0x02,0x02,0x03,0x03,0x04,0x04,
++0x05,0x07,0x04,0x04,0x07,0x0a,0x0a,0x0c,0x0c,0x12,0x05,0x07,0x07,0x08,0x0b,0x12,
++0x24,0x3c,0x01,0x01,0x01,0x01,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x01,0x02,
++0x03,0x04,0x05,0x06,0x07,0x08,0x05,0x06,0x07,0x08,0x09,0x0a,0x0b,0x0c,0x20,0x1e,
++0x1c,0x18,0x10,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0xbb,0x01,0x0c,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe0,0x22,0x50,
++0x06,0xe9,0x25,0x82,0xf8,0xe6,0x22,0xbb,0xfe,0x06,0xe9,0x25,0x82,0xf8,0xe2,0x22,
++0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe4,0x93,0x22,0xbb,0x01,0x06,
++0x89,0x82,0x8a,0x83,0xf0,0x22,0x50,0x02,0xf7,0x22,0xbb,0xfe,0x01,0xf3,0x22,0xf8,
++0xbb,0x01,0x0d,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe8,0xf0,0x22,
++0x50,0x06,0xe9,0x25,0x82,0xc8,0xf6,0x22,0xbb,0xfe,0x05,0xe9,0x25,0x82,0xc8,0xf2,
++0x22,0xc5,0xf0,0xf8,0xa3,0xe0,0x28,0xf0,0xc5,0xf0,0xf8,0xe5,0x82,0x15,0x82,0x70,
++0x02,0x15,0x83,0xe0,0x38,0xf0,0x22,0xbb,0x01,0x0a,0x89,0x82,0x8a,0x83,0xe0,0xf5,
++0xf0,0xa3,0xe0,0x22,0x50,0x06,0x87,0xf0,0x09,0xe7,0x19,0x22,0xbb,0xfe,0x07,0xe3,
++0xf5,0xf0,0x09,0xe3,0x19,0x22,0x89,0x82,0x8a,0x83,0xe4,0x93,0xf5,0xf0,0x74,0x01,
++0x93,0x22,0xbb,0x01,0x10,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe0,
++0xf5,0xf0,0xa3,0xe0,0x22,0x50,0x09,0xe9,0x25,0x82,0xf8,0x86,0xf0,0x08,0xe6,0x22,
++0xbb,0xfe,0x0a,0xe9,0x25,0x82,0xf8,0xe2,0xf5,0xf0,0x08,0xe2,0x22,0xe5,0x83,0x2a,
++0xf5,0x83,0xe9,0x93,0xf5,0xf0,0xa3,0xe9,0x93,0x22,0xbb,0x01,0x0a,0x89,0x82,0x8a,
++0x83,0xf0,0xe5,0xf0,0xa3,0xf0,0x22,0x50,0x06,0xf7,0x09,0xa7,0xf0,0x19,0x22,0xbb,
++0xfe,0x06,0xf3,0xe5,0xf0,0x09,0xf3,0x19,0x22,0xf8,0xbb,0x01,0x11,0xe5,0x82,0x29,
++0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe8,0xf0,0xe5,0xf0,0xa3,0xf0,0x22,0x50,0x09,
++0xe9,0x25,0x82,0xc8,0xf6,0x08,0xa6,0xf0,0x22,0xbb,0xfe,0x09,0xe9,0x25,0x82,0xc8,
++0xf2,0xe5,0xf0,0x08,0xf2,0x22,0xef,0x4b,0xff,0xee,0x4a,0xfe,0xed,0x49,0xfd,0xec,
++0x48,0xfc,0x22,0xe0,0xfc,0xa3,0xe0,0xfd,0xa3,0xe0,0xfe,0xa3,0xe0,0xff,0x22,0xa4,
++0x25,0x82,0xf5,0x82,0xe5,0xf0,0x35,0x83,0xf5,0x83,0x22,0xe0,0xfb,0xa3,0xe0,0xfa,
++0xa3,0xe0,0xf9,0x22,0xf8,0xe0,0xfb,0xa3,0xa3,0xe0,0xf9,0x25,0xf0,0xf0,0xe5,0x82,
++0x15,0x82,0x70,0x02,0x15,0x83,0xe0,0xfa,0x38,0xf0,0x22,0xeb,0xf0,0xa3,0xea,0xf0,
++0xa3,0xe9,0xf0,0x22,0xd0,0x83,0xd0,0x82,0xf8,0xe4,0x93,0x70,0x12,0x74,0x01,0x93,
++0x70,0x0d,0xa3,0xa3,0x93,0xf8,0x74,0x01,0x93,0xf5,0x82,0x88,0x83,0xe4,0x73,0x74,
++0x02,0x93,0x68,0x60,0xef,0xa3,0xa3,0xa3,0x80,0xdf,0x02,0x43,0xf8,0x02,0x50,0xa9,
++0xe4,0x93,0xa3,0xf8,0xe4,0x93,0xa3,0x40,0x03,0xf6,0x80,0x01,0xf2,0x08,0xdf,0xf4,
++0x80,0x29,0xe4,0x93,0xa3,0xf8,0x54,0x07,0x24,0x0c,0xc8,0xc3,0x33,0xc4,0x54,0x0f,
++0x44,0x20,0xc8,0x83,0x40,0x04,0xf4,0x56,0x80,0x01,0x46,0xf6,0xdf,0xe4,0x80,0x0b,
++0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80,0x90,0x44,0x3d,0xe4,0x7e,0x01,0x93,0x60,
++0xbc,0xa3,0xff,0x54,0x3f,0x30,0xe5,0x09,0x54,0x1f,0xfe,0xe4,0x93,0xa3,0x60,0x01,
++0x0e,0xcf,0x54,0xc0,0x25,0xe0,0x60,0xa8,0x40,0xb8,0xe4,0x93,0xa3,0xfa,0xe4,0x93,
++0xa3,0xf8,0xe4,0x93,0xa3,0xc8,0xc5,0x82,0xc8,0xca,0xc5,0x83,0xca,0xf0,0xa3,0xc8,
++0xc5,0x82,0xc8,0xca,0xc5,0x83,0xca,0xdf,0xe9,0xde,0xe7,0x80,0xbe,0x41,0x9e,0x66,
++0x00,0x41,0x9e,0xae,0x00,0x41,0x9e,0x4d,0x80,0x41,0x9e,0x4e,0x80,0x41,0x9e,0xb0,
++0x00,0x00,0xf0,0x90,0x9e,0x57,0xe0,0x90,0x9e,0x8a,0xf0,0xe4,0xfb,0xfd,0x7f,0x54,
++0x7e,0x01,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x88,0xeb,0xf0,0xa3,0xe0,
++0xfb,0xa3,0xe0,0xf5,0x44,0xe4,0xf5,0x45,0x12,0x30,0x62,0xd0,0xd0,0x92,0xaf,0x22,
++0x90,0x01,0x5f,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x08,0xf0,0xe4,0x90,0x9e,0x89,0xf0,
++0x90,0x9e,0x55,0xe0,0x90,0x9e,0x8a,0xf0,0xe4,0xfb,0xfd,0x7f,0x5c,0x7e,0x01,0x91,
++0x62,0x90,0x01,0x5f,0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x02,0xf0,0x90,0x9e,0x5c,
++0x14,0xf0,0x90,0x9e,0x5e,0xe0,0x54,0x0f,0xc3,0x94,0x0c,0x50,0x02,0xf1,0x16,0x22,
++0x8f,0x82,0x8e,0x83,0xa3,0xa3,0xa3,0xe4,0xf0,0x22,0xe4,0xf5,0x22,0x7f,0x60,0x7e,
++0x01,0x80,0xed,0x90,0x9e,0x60,0xe0,0xff,0x7d,0x01,0xe1,0x1a,0xb1,0xb1,0xbf,0x01,
++0x0f,0x90,0x9e,0x68,0xe0,0xff,0xe4,0xfd,0xf1,0xfe,0x90,0x04,0x1f,0x74,0x20,0xf0,
++0x22,0x90,0x01,0xca,0xe5,0x25,0xf0,0xef,0x60,0x03,0x12,0x4f,0x2a,0x22,0x22,0x22,
++0x22,0x22,0x00,0x02,0x60,0x8d,0x02,0x60,0x94,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,
++0x8b,0x1b,0x8a,0x1c,0x89,0x1d,0x90,0x9e,0x8b,0x71,0x8b,0xab,0x1e,0xaa,0x1f,0xa9,
++0x20,0x90,0x9e,0x8e,0x71,0x8b,0xaf,0x21,0x15,0x21,0xef,0x60,0x1b,0x90,0x9e,0x8e,
++0xe4,0x75,0xf0,0x01,0x71,0x74,0x12,0x24,0x62,0xff,0x90,0x9e,0x8b,0xe4,0x75,0xf0,
++0x01,0x71,0x74,0xef,0x51,0x4d,0x80,0xde,0xab,0x1b,0xaa,0x1c,0xa9,0x1d,0xd0,0xd0,
++0x92,0xaf,0x22,0x90,0x06,0xa9,0xe0,0xf5,0x50,0x54,0xc0,0x70,0x0d,0x90,0x9e,0x63,
++0xe0,0x54,0xfe,0xf0,0xe0,0x54,0xfd,0xf0,0x91,0xd3,0xe5,0x50,0x30,0xe6,0x17,0x90,
++0x9e,0x63,0xe0,0x44,0x01,0xf0,0x90,0x9e,0x61,0xe0,0x64,0x02,0x60,0x04,0x91,0xdc,
++0x80,0x0b,0x91,0x80,0x80,0x07,0x90,0x9e,0x63,0xe0,0x54,0xfe,0xf0,0xe5,0x50,0x90,
++0x9e,0x63,0x30,0xe7,0x17,0xe0,0x44,0x02,0xf0,0xe4,0x90,0x9e,0x89,0x91,0x52,0x90,
++0x01,0x57,0x74,0x05,0xf0,0x90,0x9e,0x62,0x74,0x01,0xf0,0x22,0xe0,0x54,0xfd,0xf0,
++0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x04,0x1d,0xe0,0x60,0x1a,0x90,0x05,
++0x22,0xe0,0x54,0x90,0x60,0x07,0x90,0x01,0xc6,0xe0,0x44,0x40,0xf0,0x90,0x01,0xc7,
++0xe0,0x30,0xe1,0xe4,0x7f,0x00,0x80,0x02,0x7f,0x01,0xd0,0xd0,0x92,0xaf,0x22,0xc0,
++0xe0,0xc0,0xf0,0xc0,0x83,0xc0,0x82,0xc0,0xd0,0x75,0xd0,0x00,0xc0,0x00,0xc0,0x01,
++0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0x90,0x01,0xc4,0x74,
++0xdf,0xf0,0x74,0x45,0xa3,0xf0,0x53,0x91,0xdf,0x90,0x01,0x3c,0xe0,0x55,0x30,0xf5,
++0x34,0xa3,0xe0,0x55,0x31,0xf5,0x35,0xa3,0xe0,0x55,0x32,0xf5,0x36,0xa3,0xe0,0x55,
++0x33,0xf5,0x37,0xe5,0x34,0x30,0xe0,0x06,0x90,0x01,0x3c,0x74,0x01,0xf0,0xe5,0x34,
++0x30,0xe1,0x08,0x90,0x01,0x3c,0x74,0x02,0xf0,0xf1,0xbc,0xe5,0x34,0x30,0xe2,0x38,
++0x90,0x01,0x3c,0x74,0x04,0xf0,0x90,0x06,0x92,0xe0,0x30,0xe0,0x24,0x90,0x9e,0x89,
++0xe4,0xf0,0x90,0x9e,0x55,0xe0,0x90,0x9e,0x8a,0xf0,0xe4,0xfb,0xfd,0x7f,0x58,0x7e,
++0x01,0x91,0x62,0x90,0x01,0x5b,0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x01,0xf0,0x80,
++0x07,0x90,0x9e,0x5d,0xe4,0xf0,0x91,0xd3,0xe5,0x34,0x30,0xe3,0x38,0x90,0x01,0x3c,
++0x74,0x08,0xf0,0x90,0x06,0x92,0xe0,0x30,0xe1,0x24,0x90,0x9e,0x89,0xe4,0xf0,0x90,
++0x9e,0x55,0xe0,0x90,0x9e,0x8a,0xf0,0xe4,0xfb,0xfd,0x7f,0x5c,0x7e,0x01,0x91,0x62,
++0x90,0x01,0x5f,0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x02,0xf0,0x80,0x07,0x90,0x9e,
++0x5c,0xe4,0xf0,0x91,0xd3,0xe5,0x34,0x30,0xe4,0x09,0x90,0x01,0x3c,0x74,0x10,0xf0,
++0x12,0x4d,0xe2,0xe5,0x34,0x30,0xe5,0x09,0x90,0x01,0x3c,0x74,0x20,0xf0,0x12,0x4e,
++0x25,0xe5,0x35,0x30,0xe0,0x1a,0x90,0x01,0x3d,0x74,0x01,0xf0,0x90,0x01,0x2f,0xe0,
++0x44,0x7f,0xf0,0x90,0x00,0x83,0xe0,0x90,0x9e,0x60,0xf0,0x12,0x64,0xa1,0x91,0xd3,
++0x74,0xdf,0x04,0x90,0x01,0xc4,0xf0,0x74,0x45,0xa3,0xf0,0xd0,0x07,0xd0,0x06,0xd0,
++0x05,0xd0,0x04,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,0xd0,0x82,0xd0,
++0x83,0xd0,0xf0,0xd0,0xe0,0x32,0x7d,0x01,0x7f,0x0c,0x8f,0x71,0x8d,0x72,0xe5,0x71,
++0x54,0x0f,0xff,0x90,0x9e,0x5e,0xe0,0x54,0x0f,0x6f,0x60,0x72,0xe5,0x71,0x30,0xe2,
++0x2b,0x90,0x9e,0x5e,0xe0,0x20,0xe2,0x05,0x7f,0x01,0x12,0x63,0x92,0x90,0x9e,0x5e,
++0xe0,0x30,0xe3,0x07,0xe5,0x71,0x20,0xe3,0x02,0x80,0x54,0x90,0x9e,0x5e,0xe0,0x20,
++0xe3,0x4c,0xe5,0x71,0x30,0xe3,0x47,0xaf,0x72,0x02,0x63,0x2e,0x90,0x9e,0x5e,0xe0,
++0x54,0x0f,0xff,0xbf,0x0c,0x0d,0xe5,0x71,0x20,0xe3,0x08,0x12,0x5e,0xf1,0xef,0x60,
++0x2d,0xf1,0x9f,0x90,0x9e,0x5e,0xe0,0x54,0x0f,0xff,0xbf,0x04,0x0e,0xe5,0x71,0x20,
++0xe2,0x09,0x12,0x62,0x50,0xef,0x60,0x16,0x12,0x48,0xaa,0x90,0x9e,0x5e,0xe0,0x54,
++0x0f,0xff,0xbf,0x02,0x09,0x12,0x62,0xbb,0xef,0x60,0x03,0x12,0x64,0x87,0x22,0x90,
++0x06,0x04,0xe0,0x44,0x40,0xf0,0xe5,0x73,0xb4,0x01,0x05,0x7f,0x01,0x12,0x63,0x4d,
++0x90,0x9e,0x5e,0xe0,0x54,0xf0,0xf0,0xe0,0x44,0x04,0xf0,0x22,0x90,0x9e,0x62,0xe0,
++0x60,0x0e,0xe4,0xf0,0xa3,0xe0,0x54,0xfd,0xf0,0xe0,0x54,0x07,0x70,0x2b,0x80,0x27,
++0x90,0x9e,0x51,0xe0,0x04,0xf0,0x90,0x9e,0x63,0xe0,0x54,0xef,0xf0,0x90,0x9e,0x56,
++0xe0,0xff,0x90,0x9e,0x51,0xe0,0xd3,0x9f,0x40,0x0d,0xe5,0x73,0xb4,0x01,0x0a,0xa3,
++0xe0,0x70,0x06,0xe0,0x04,0xf0,0x22,0x91,0xd3,0x22,0xe0,0xff,0x7d,0x01,0x90,0x9e,
++0x9c,0xef,0xf0,0xa3,0xed,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xe5,0x74,0x60,0x04,0xe4,
++0xff,0x11,0x8f,0x90,0x9e,0x9c,0xe0,0x30,0xe0,0x09,0x90,0x9e,0x9e,0xe4,0xf0,0xa3,
++0x74,0x80,0xf0,0x90,0x9e,0x9c,0xe0,0xff,0xc3,0x13,0x90,0xfd,0x10,0xf0,0x90,0x04,
++0x25,0xef,0xf0,0x90,0x9e,0x9d,0xe0,0x60,0x1f,0xa3,0xa3,0xe0,0xff,0x24,0x0f,0xf5,
++0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x80,0xf0,0x74,0x10,0x2f,0xf5,0x82,0xe4,
++0x34,0xfc,0xf5,0x83,0xe0,0x44,0x80,0xf0,0x90,0x9e,0x9e,0xa3,0xe0,0xff,0xfd,0x24,
++0x08,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe4,0xf0,0x74,0x09,0x2d,0xf5,0x82,0xe4,
++0x34,0xfc,0xf5,0x83,0xe0,0x54,0xf0,0xf0,0x74,0x21,0x2f,0xf5,0x82,0xe4,0x34,0xfc,
++0xf5,0x83,0xe0,0x54,0xf7,0xf0,0x90,0x9e,0x9e,0xe0,0xfe,0xa3,0xe0,0xff,0x22,0xef,
++0x60,0x0b,0x90,0x9e,0x77,0xe0,0xb4,0x01,0x10,0xe4,0xff,0x80,0x09,0x90,0x9e,0x77,
++0xe0,0xb4,0x01,0x05,0x7f,0x01,0x12,0x77,0x66,0x22,0x90,0x01,0x37,0x74,0x02,0xf0,
++0x90,0x05,0x22,0x74,0xff,0xf0,0x12,0x77,0x1c,0xef,0x70,0x06,0x90,0x01,0xc8,0x74,
++0xfd,0xf0,0x7d,0x02,0x7f,0x03,0x12,0x31,0x9d,0xe5,0x74,0x60,0x04,0x7f,0x01,0x11,
++0x8f,0x11,0xdf,0x90,0x9e,0x5e,0xe0,0x54,0xf0,0xf0,0xe0,0x44,0x02,0xf0,0x22,0x7f,
++0x78,0x7e,0x08,0x12,0x22,0x65,0x90,0x9d,0xff,0x12,0x25,0x08,0x7f,0x04,0x7e,0x0c,
++0x12,0x22,0x65,0x90,0x9e,0x03,0x12,0x25,0x08,0x7f,0x00,0x7e,0x08,0x12,0x22,0x65,
++0x90,0x9e,0x07,0x12,0x25,0x08,0x90,0x9e,0x77,0xe0,0x90,0x9d,0xff,0xb4,0x01,0x0d,
++0x12,0x43,0x53,0xef,0x54,0xc7,0xff,0xed,0x54,0xc7,0xfd,0x80,0x07,0x12,0x43,0x53,
++0xef,0x54,0xc7,0xff,0xec,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x78,0x7e,0x08,0x12,
++0x2b,0x08,0x90,0x9e,0x03,0x12,0x43,0x53,0xef,0x54,0x0f,0xff,0xec,0x90,0x80,0x96,
++0x12,0x25,0x08,0x7f,0x04,0x7e,0x0c,0x12,0x2b,0x08,0x90,0x9e,0x07,0x12,0x43,0x53,
++0xef,0x44,0x02,0xff,0xec,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x00,0x7e,0x08,0x12,
++0x2b,0x08,0x7f,0x70,0x7e,0x0e,0x12,0x22,0x65,0x90,0x9e,0x0b,0x12,0x25,0x08,0x90,
++0x80,0x96,0x12,0x25,0x14,0x00,0x1b,0x25,0xa0,0x7f,0x70,0x7e,0x0e,0x12,0x2b,0x08,
++0x90,0x80,0x68,0x12,0x25,0x14,0x00,0x00,0x00,0x00,0xe4,0xfd,0xff,0x12,0x30,0x2c,
++0x90,0x9e,0x77,0xe0,0xb4,0x01,0x11,0x90,0x80,0x68,0x12,0x25,0x14,0x00,0x00,0x00,
++0x00,0xe4,0xfd,0x7f,0x01,0x12,0x30,0x2c,0x90,0x00,0x11,0xe0,0x54,0xf6,0xf0,0x80,
++0x08,0xf4,0xff,0x90,0x00,0x43,0xe0,0x5f,0xf0,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,
++0x7f,0x10,0xdf,0xfe,0xd0,0xd0,0x92,0xaf,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,
++0x90,0x9e,0xad,0xed,0xf0,0x90,0x9e,0xac,0xef,0xf0,0xd3,0x94,0x07,0x50,0x63,0xe0,
++0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,
++0x47,0xe0,0x5f,0xf0,0x31,0xb9,0x90,0x9e,0xac,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,
++0x80,0x02,0xc3,0x33,0xd8,0xfc,0xff,0x90,0x00,0x46,0xe0,0x4f,0xf0,0x31,0xb9,0x90,
++0x9e,0xad,0xe0,0x60,0x16,0x90,0x9e,0xac,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,
++0x02,0xc3,0x33,0xd8,0xfc,0xff,0x90,0x00,0x45,0x80,0x66,0x90,0x9e,0xac,0xe0,0xff,
++0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x45,
++0x80,0x6b,0x90,0x9e,0xac,0xe0,0x24,0xf8,0xf0,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,
++0x80,0x02,0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0,0x31,0xb1,0x90,0x9e,0xac,0xe0,0xff,
++0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xff,0x90,0x00,0x43,0xe0,
++0x4f,0xf0,0x31,0xb9,0x90,0x9e,0xad,0xe0,0x60,0x1b,0x90,0x9e,0xac,0xe0,0xff,0x74,
++0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0,0xff,0x90,0x00,
++0x42,0xe0,0x4f,0x80,0x1a,0x90,0x9e,0xac,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,
++0x02,0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0,0xf4,0xff,0x90,0x00,0x42,0xe0,0x5f,0xf0,
++0x31,0xb9,0xd0,0xd0,0x92,0xaf,0x22,0xf0,0x90,0x00,0x45,0xe0,0x54,0xfe,0xfd,0x7f,
++0x45,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x8f,0x82,0x75,0x83,0x00,0xed,0xf0,0x31,
++0xb9,0xd0,0xd0,0x92,0xaf,0x22,0xef,0x14,0x60,0x30,0x14,0x60,0x66,0x24,0x02,0x60,
++0x02,0x61,0x7d,0x90,0x9e,0x1a,0x74,0x02,0xf0,0x90,0x00,0x48,0xe0,0x44,0x0c,0xfd,
++0x7f,0x48,0x51,0xc1,0x90,0x00,0x47,0xe0,0x44,0x08,0xfd,0x7f,0x47,0x51,0xc1,0x90,
++0x00,0x45,0xe0,0x44,0x10,0xfd,0x7f,0x45,0x80,0x71,0xe4,0x90,0x9e,0x1a,0xf0,0x90,
++0x9e,0x16,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x80,0x7e,0x08,0x12,
++0x2b,0x08,0x90,0x00,0x45,0xe0,0x44,0xef,0xfd,0x7f,0x45,0x51,0xc1,0x90,0x00,0x45,
++0xe0,0x54,0xef,0xfd,0x7f,0x45,0x51,0xc1,0x90,0x00,0x46,0xe0,0x44,0x10,0xfd,0x7f,
++0x46,0x80,0x38,0x90,0x9e,0x1a,0x74,0x01,0xf0,0x90,0x9e,0x20,0x12,0x43,0x53,0x90,
++0x80,0x96,0x12,0x25,0x08,0x7f,0x80,0x7e,0x08,0x12,0x2b,0x08,0x90,0x00,0x45,0xe0,
++0x44,0x20,0xfd,0x7f,0x45,0x51,0xc1,0x90,0x00,0x45,0xe0,0x44,0x10,0xfd,0x7f,0x45,
++0x51,0xc1,0x90,0x00,0x46,0xe0,0x44,0x10,0xfd,0x7f,0x46,0x51,0xc1,0x22,0x90,0x00,
++0x02,0x12,0x42,0x20,0x90,0x9e,0x1c,0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0x25,0xe0,
++0x25,0xe0,0x90,0x9e,0x1b,0xf0,0x12,0x24,0x62,0x25,0xe0,0x25,0xe0,0x90,0x9e,0x1f,
++0xf0,0x90,0x05,0x60,0xe0,0x90,0x9e,0x2a,0xf0,0x90,0x05,0x61,0xe0,0x90,0x9e,0x2b,
++0xf0,0x90,0x05,0x62,0xe0,0x90,0x9e,0x2c,0xf0,0x90,0x05,0x63,0xe0,0x90,0x9e,0x2d,
++0xf0,0xa2,0xaf,0xe4,0x33,0x90,0x9e,0x3f,0xf0,0xc2,0xaf,0x90,0x9e,0x1b,0xe0,0xff,
++0xd1,0xd8,0x90,0x9e,0x3f,0xe0,0x24,0xff,0x92,0xaf,0x90,0x9e,0x1c,0xe0,0x70,0x02,
++0x81,0x84,0x90,0x9e,0x1b,0xe0,0x70,0x02,0x81,0x84,0x90,0x9e,0x1f,0xe0,0x70,0x02,
++0x81,0x84,0xa2,0xaf,0xe4,0x33,0x90,0x9e,0x3f,0xf0,0xc2,0xaf,0x90,0x9e,0x2e,0x74,
++0x01,0xf0,0x90,0x9e,0x3f,0xe0,0x24,0xff,0x92,0xaf,0x51,0xb8,0x90,0x00,0x46,0xe0,
++0x44,0x01,0xfd,0x7f,0x46,0x51,0xc1,0x90,0x9e,0x14,0xe0,0x60,0x15,0x90,0x9e,0x20,
++0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x80,0x7e,0x08,0x12,0x2b,0x08,
++0x80,0x06,0x90,0x05,0x22,0x74,0x7f,0xf0,0x90,0x00,0x45,0xe0,0x54,0xef,0xfd,0x7f,
++0x45,0x51,0xc1,0x90,0x05,0x87,0xe0,0x64,0x80,0xf0,0x90,0x9e,0x2a,0xe0,0x90,0x05,
++0x84,0xf0,0x90,0x9e,0x2b,0xe0,0x90,0x05,0x85,0xf0,0x90,0x9e,0x2c,0xe0,0x90,0x05,
++0x86,0xf0,0x90,0x9e,0x2d,0xe0,0x90,0x05,0x87,0xf0,0xa2,0xaf,0xe4,0x33,0x90,0x9e,
++0x3f,0xf0,0xc2,0xaf,0x90,0x01,0x3c,0xe0,0x44,0x20,0xf0,0x7d,0x20,0xe4,0xff,0x12,
++0x31,0xb7,0x80,0x2b,0x90,0x9e,0x1c,0xe0,0x70,0x2d,0x90,0x9e,0x2e,0x51,0xb7,0x90,
++0x00,0x46,0xe0,0x54,0xfe,0xfd,0x7f,0x46,0x51,0xc1,0x90,0x05,0x22,0xe4,0xf0,0xa2,
++0xaf,0x33,0x90,0x9e,0x3f,0xf0,0xc2,0xaf,0x7d,0x20,0xe4,0xff,0x12,0x31,0x49,0x90,
++0x9e,0x3f,0xe0,0x24,0xff,0x92,0xaf,0x22,0x8b,0x59,0x8a,0x5a,0x89,0x5b,0x90,0x00,
++0x02,0x12,0x42,0x20,0x90,0x9e,0x1d,0xf0,0xe0,0x30,0xe0,0x4b,0x90,0x9e,0x14,0x74,
++0x01,0xf0,0x7f,0x80,0x7e,0x08,0x12,0x22,0x65,0x90,0x9e,0x16,0x12,0x25,0x08,0xab,
++0x59,0xaa,0x5a,0xa9,0x5b,0x90,0x00,0x01,0x12,0x42,0x20,0xff,0xe4,0xfc,0xfd,0xfe,
++0x78,0x1a,0x12,0x24,0xf5,0xa8,0x04,0xa9,0x05,0xaa,0x06,0xab,0x07,0x90,0x9e,0x16,
++0x12,0x43,0x53,0xec,0x54,0x03,0xfc,0x12,0x43,0x46,0x90,0x9e,0x20,0x12,0x25,0x08,
++0x90,0x05,0x22,0xe4,0xf0,0x80,0x2d,0xe4,0x90,0x9e,0x14,0xf0,0x7f,0x80,0x7e,0x08,
++0x12,0x22,0x65,0xec,0x54,0x03,0xfc,0xec,0x44,0xc0,0xfc,0x90,0x9e,0x16,0x12,0x25,
++0x08,0x90,0x9e,0x16,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x80,0x7e,
++0x08,0x12,0x2b,0x08,0x90,0x9e,0x1d,0xe0,0x30,0xe1,0x19,0x7d,0x0c,0x7f,0x47,0x51,
++0xc1,0x90,0x00,0x48,0xe0,0x44,0x0c,0xfd,0x7f,0x48,0x51,0xc1,0x90,0x00,0x46,0xe0,
++0x44,0x10,0x80,0x1c,0x90,0x00,0x47,0xe0,0x54,0xf3,0xfd,0x7f,0x47,0x51,0xc1,0x90,
++0x00,0x48,0xe0,0x54,0xf3,0xfd,0x7f,0x48,0x51,0xc1,0x90,0x00,0x46,0xe0,0x54,0xef,
++0xfd,0x7f,0x46,0x51,0xc1,0xe4,0x90,0x9e,0x1a,0xf0,0x22,0x90,0x01,0x3c,0x74,0xff,
++0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x01,0x34,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xfd,
++0x7f,0x54,0x51,0xc1,0x7d,0xff,0x7f,0x55,0x51,0xc1,0x7d,0xff,0x7f,0x56,0x51,0xc1,
++0x7d,0xff,0x7f,0x57,0x41,0xc1,0x90,0x01,0x30,0xe4,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,
++0xf0,0x90,0x01,0x38,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xfd,0x7f,0x50,0x51,0xc1,
++0xe4,0xfd,0x7f,0x51,0x51,0xc1,0xe4,0xfd,0x7f,0x52,0x51,0xc1,0xe4,0xfd,0x7f,0x53,
++0x41,0xc1,0xe5,0x22,0x64,0x01,0x70,0x3c,0xf1,0xbe,0xbf,0x01,0x05,0x7f,0x01,0x12,
++0x44,0xf1,0x90,0x00,0x46,0xe0,0x44,0x04,0xfd,0x7f,0x46,0x51,0xc1,0x90,0x00,0x44,
++0xe0,0x54,0xfb,0xfd,0x7f,0x44,0x51,0xc1,0x90,0x00,0x46,0xe0,0x54,0xfb,0xfd,0x7f,
++0x46,0x51,0xc1,0x7f,0x02,0xf1,0xea,0x8f,0x26,0x90,0x01,0xc9,0xe5,0x26,0xf0,0xb4,
++0x01,0x02,0xf1,0x2a,0x22,0x90,0x9e,0x1c,0xe0,0x64,0x01,0x60,0x02,0xc1,0xd7,0x90,
++0x00,0x46,0xe0,0x44,0x01,0xfd,0x7f,0x46,0x51,0xc1,0x90,0x9e,0x2e,0xe0,0x70,0x31,
++0x90,0x9e,0x14,0xe0,0x60,0x15,0x90,0x9e,0x20,0x12,0x43,0x53,0x90,0x80,0x96,0x12,
++0x25,0x08,0x7f,0x80,0x7e,0x08,0x12,0x2b,0x08,0x80,0x06,0x90,0x05,0x22,0x74,0x7f,
++0xf0,0x90,0x9e,0x1b,0xe0,0xff,0xd1,0xd8,0x90,0x9e,0x2e,0x74,0x01,0x51,0xb7,0x80,
++0x3f,0x90,0x9e,0x2e,0xe0,0x64,0x01,0x70,0x37,0x90,0x9e,0x1f,0xe0,0xff,0xd1,0xd8,
++0xe4,0x90,0x9e,0x2e,0xf0,0x90,0x00,0x45,0xe0,0x44,0x01,0xfd,0x7f,0x45,0x51,0xc1,
++0x90,0x9e,0x14,0xe0,0x60,0x15,0x90,0x9e,0x16,0x12,0x43,0x53,0x90,0x80,0x96,0x12,
++0x25,0x08,0x7f,0x80,0x7e,0x08,0x12,0x2b,0x08,0x80,0x05,0x90,0x05,0x22,0xe4,0xf0,
++0x90,0x05,0x87,0xe0,0x64,0x80,0xf0,0x90,0x9e,0x2a,0xe0,0x90,0x05,0x84,0xf0,0x90,
++0x9e,0x2b,0xe0,0x90,0x05,0x85,0xf0,0x90,0x9e,0x2c,0xe0,0x90,0x05,0x86,0xf0,0x90,
++0x9e,0x2d,0xe0,0x90,0x05,0x87,0xf0,0x22,0x90,0x05,0x60,0xe0,0x90,0x9e,0x2a,0xf0,
++0x90,0x05,0x61,0xe0,0x90,0x9e,0x2b,0xf0,0x90,0x05,0x62,0xe0,0x90,0x9e,0x2c,0xf0,
++0x90,0x05,0x63,0xe0,0x90,0x9e,0x2d,0xf0,0xc3,0x74,0xff,0x9f,0xfe,0x90,0x9e,0x2b,
++0xe0,0xd3,0x9e,0x40,0x1e,0xe0,0x2f,0xf0,0xa3,0xe0,0xb4,0xff,0x0f,0xe4,0xf0,0xa3,
++0xe0,0xb4,0xff,0x03,0xe4,0xf0,0x22,0x90,0x9e,0x2d,0x80,0x03,0x90,0x9e,0x2c,0xe0,
++0x04,0xf0,0x22,0x90,0x9e,0x2b,0xe0,0x2f,0xf0,0x22,0x90,0x00,0x49,0xe0,0x90,0x9e,
++0xb1,0xf0,0xe0,0x54,0x0f,0xf0,0x44,0xf0,0xfd,0x7f,0x49,0x51,0xc1,0x90,0x9e,0xb1,
++0xe0,0x44,0xb0,0xfd,0x7f,0x49,0x41,0xc1,0x8e,0x59,0x8f,0x5a,0x8b,0x5b,0x8a,0x5c,
++0x89,0x5d,0xe4,0x90,0x9e,0x34,0xf0,0xef,0x90,0x00,0x31,0xf0,0x31,0xb9,0xe5,0x59,
++0x54,0x03,0xff,0x90,0x00,0x32,0xe0,0x54,0xfc,0x4f,0xf0,0x31,0xb9,0x90,0x00,0x33,
++0xe0,0x54,0x7f,0xf0,0x31,0xb9,0x90,0x00,0x33,0xe0,0x20,0xe7,0x0e,0x90,0x9e,0x34,
++0xe0,0xc3,0x94,0x64,0x50,0x05,0xe0,0x04,0xf0,0x80,0xeb,0x90,0x9e,0x34,0xe0,0xc3,
++0x94,0x64,0x50,0x10,0x90,0x00,0x30,0xe0,0xab,0x5b,0xaa,0x5c,0xa9,0x5d,0x12,0x42,
++0x4d,0x7f,0x01,0x22,0x7f,0x00,0x22,0x12,0x45,0xb1,0xbf,0x01,0x10,0x90,0x02,0x09,
++0xe0,0xff,0x7d,0x01,0x12,0x47,0xfe,0x90,0x04,0x1f,0x74,0x20,0xf0,0x22,0x7f,0x0b,
++0xf1,0xea,0xef,0x65,0x25,0x60,0x10,0xe5,0x25,0xb4,0x01,0x05,0xe4,0xf5,0x25,0x80,
++0x03,0x75,0x25,0x01,0x7f,0x01,0x22,0x7f,0x00,0x22,0xe4,0x90,0x9e,0x74,0xf0,0x90,
++0x00,0x80,0xe0,0x44,0x80,0xfd,0x7f,0x80,0x41,0xc1,0xd3,0x10,0xaf,0x01,0xc3,0xc0,
++0xd0,0x90,0x9e,0xb2,0xef,0xf0,0xd3,0x94,0x07,0x50,0x47,0xe0,0xff,0x74,0x01,0xa8,
++0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x46,0xe0,0x5f,0xf0,
++0x12,0x49,0xb9,0x90,0x9e,0xb2,0xe0,0xfd,0x74,0x01,0x7e,0x00,0xa8,0x05,0x08,0x80,
++0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x00,0x44,0xe0,0xfb,0xe4,0xfe,
++0xef,0x5b,0xa8,0x05,0x08,0x80,0x06,0xce,0xa2,0xe7,0x13,0xce,0x13,0xd8,0xf8,0xff,
++0x80,0x44,0x90,0x9e,0xb2,0xe0,0x24,0xf8,0xf0,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,
++0x80,0x02,0xc3,0x33,0xd8,0xfc,0x12,0x49,0xb1,0x90,0x9e,0xb2,0xe0,0xfd,0x74,0x01,
++0x7e,0x00,0xa8,0x05,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,
++0x00,0x42,0xe0,0xfb,0xe4,0xfe,0xef,0x5b,0xa8,0x05,0x08,0x80,0x06,0xce,0xa2,0xe7,
++0x13,0xce,0x13,0xd8,0xf8,0xff,0xd0,0xd0,0x92,0xaf,0x22,0x75,0x28,0x33,0xe4,0xf5,
++0x29,0x75,0x2a,0x03,0xf5,0x2b,0x90,0x01,0x30,0xe5,0x28,0xf0,0xa3,0xe5,0x29,0xf0,
++0xa3,0xe5,0x2a,0xf0,0xa3,0xe5,0x2b,0xf0,0x22,0xe4,0x90,0x9e,0x31,0xf0,0xa3,0xf0,
++0x75,0x8e,0x02,0x12,0x4f,0xda,0x12,0x5f,0xa9,0x12,0x5f,0xbc,0xe4,0xf5,0x12,0x12,
++0x6f,0xa1,0x12,0x77,0x5d,0x12,0x60,0x9b,0x12,0x2e,0x01,0x12,0x77,0x18,0x11,0x8b,
++0x90,0x00,0xf3,0xe0,0x30,0xe2,0x0d,0x90,0x05,0x41,0x74,0x10,0xf0,0x90,0x05,0x5a,
++0xf0,0xa3,0xe4,0xf0,0x12,0x5f,0xf4,0x12,0x5f,0x91,0x12,0x44,0xfe,0x12,0x7d,0x1d,
++0x90,0x9e,0x33,0xe5,0xd9,0xf0,0x12,0x4d,0x8b,0xc2,0xaf,0x90,0x00,0x80,0xe0,0x44,
++0x40,0xf0,0x12,0x49,0xb9,0x75,0xe8,0x03,0x43,0xa8,0x85,0xd2,0xaf,0x90,0x01,0xbe,
++0xe0,0x04,0xf0,0x90,0x01,0xc0,0xe0,0x04,0xf0,0x90,0x9e,0x31,0xe0,0x64,0x01,0xf0,
++0x24,0xa9,0x90,0x01,0xc4,0xf0,0x74,0x50,0xa3,0xf0,0xe5,0x12,0x30,0xe4,0x09,0xc2,
++0xaf,0x53,0x12,0xef,0xd2,0xaf,0x31,0x8e,0xe5,0x12,0x30,0xe6,0x17,0xc2,0xaf,0x53,
++0x12,0xbf,0xd2,0xaf,0x12,0x69,0x51,0x90,0x9e,0x1e,0xe0,0xff,0x60,0x03,0xb4,0x01,
++0x03,0x12,0x7d,0x7b,0x90,0x9e,0x1e,0xe0,0x70,0x03,0x12,0x7e,0x7e,0x31,0x61,0x80,
++0xb8,0x90,0x06,0x34,0xe0,0x60,0x26,0x14,0x70,0x1b,0x7b,0x01,0x7a,0x06,0x79,0x35,
++0x7f,0xf9,0x7e,0x01,0x12,0x4f,0x48,0xbf,0x01,0x09,0x90,0x06,0x35,0xe0,0x54,0x0f,
++0xf0,0x80,0x05,0x80,0x00,0x02,0x77,0x0a,0xe4,0x90,0x06,0x34,0xf0,0x22,0x90,0x01,
++0xcc,0xe0,0x54,0x0f,0x90,0x9e,0x34,0xf0,0x90,0x9e,0x34,0xe0,0xfd,0x70,0x02,0x41,
++0xcf,0x90,0x9e,0xae,0xe0,0xff,0x74,0x01,0x7e,0x00,0xa8,0x07,0x08,0x80,0x05,0xc3,
++0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0xef,0x5d,0x70,0x02,0x41,0xc8,0x90,0x9e,0xae,
++0xe0,0x75,0xf0,0x04,0x90,0x01,0xd0,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x35,0xf0,0x75,
++0x1e,0x01,0x75,0x1f,0x9e,0x75,0x20,0x35,0x75,0x21,0x01,0x7b,0x01,0x7a,0x9e,0x79,
++0x36,0x12,0x45,0x09,0x90,0x9e,0x36,0xe0,0xff,0xc4,0x13,0x13,0x13,0x54,0x01,0x90,
++0x9e,0xae,0x30,0xe0,0x59,0xe0,0x75,0xf0,0x02,0x90,0x00,0x88,0x12,0x43,0x5f,0xe0,
++0x90,0x9e,0x37,0xf0,0x90,0x9e,0xae,0xe0,0x75,0xf0,0x02,0x90,0x00,0x89,0x12,0x43,
++0x5f,0xe0,0x90,0x9e,0x38,0xf0,0x90,0x9e,0xae,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd1,
++0x12,0x43,0x5f,0xe0,0x90,0x9e,0x39,0xf0,0x90,0x9e,0xae,0xe0,0x75,0xf0,0x04,0x90,
++0x01,0xd2,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x3a,0xf0,0x90,0x9e,0xae,0xe0,0x75,0xf0,
++0x04,0x90,0x01,0xd3,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x3b,0xf0,0x80,0x33,0xe0,0x75,
++0xf0,0x04,0x90,0x01,0xd1,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x37,0xf0,0x90,0x9e,0xae,
++0xe0,0x75,0xf0,0x04,0x90,0x01,0xd2,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x38,0xf0,0x90,
++0x9e,0xae,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd3,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x39,
++0xf0,0xef,0x54,0x7f,0xff,0x7b,0x01,0x7a,0x9e,0x79,0x37,0x51,0xd0,0x90,0x9e,0x34,
++0xe0,0xff,0x90,0x9e,0xae,0xe0,0xfe,0x74,0x01,0xa8,0x06,0x08,0x80,0x02,0xc3,0x33,
++0xd8,0xfc,0xf4,0x5f,0x90,0x9e,0x34,0xf0,0x90,0x9e,0xae,0xe0,0xff,0x74,0x01,0xa8,
++0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0x90,0x01,0xcc,0xf0,0x90,0x9e,0xae,0xe0,
++0x04,0xf0,0xe0,0x54,0x03,0xf0,0x21,0x98,0x90,0x01,0xc6,0xe0,0x44,0x02,0xf0,0x22,
++0x90,0x9e,0x3c,0x12,0x43,0x8b,0xef,0x12,0x43,0x94,0x53,0x0b,0x01,0x53,0x14,0x02,
++0x53,0x2f,0x03,0x53,0x38,0x05,0x53,0x41,0x06,0x53,0x8f,0x07,0x53,0x49,0x09,0x53,
++0x52,0x0c,0x53,0x5b,0x0d,0x53,0x64,0x0e,0x53,0x6d,0x1b,0x53,0x76,0x1c,0x53,0x7f,
++0x2c,0x53,0x1d,0x2d,0x53,0x26,0x2e,0x00,0x00,0x53,0x88,0x90,0x9e,0x3c,0x12,0x43,
++0x6b,0x02,0x61,0x9d,0x90,0x9e,0x3c,0x12,0x43,0x6b,0x02,0x71,0xc4,0x90,0x9e,0x3c,
++0x12,0x43,0x6b,0x02,0x71,0xca,0x90,0x9e,0x3c,0x12,0x43,0x6b,0x02,0x72,0x12,0x90,
++0x9e,0x3c,0x12,0x43,0x6b,0x02,0x72,0x40,0x90,0x9e,0x3c,0x12,0x43,0x6b,0x02,0x71,
++0x74,0x90,0x9e,0x3c,0x12,0x43,0x6b,0x80,0x47,0x90,0x9e,0x3c,0x12,0x43,0x6b,0x02,
++0x72,0x88,0x90,0x9e,0x3c,0x12,0x43,0x6b,0x02,0x4b,0x7e,0x90,0x9e,0x3c,0x12,0x43,
++0x6b,0x02,0x7c,0xea,0x90,0x9e,0x3c,0x12,0x43,0x6b,0x02,0x4c,0xb8,0x90,0x9e,0x3c,
++0x12,0x43,0x6b,0x02,0x71,0xbc,0x90,0x9e,0x3c,0x12,0x43,0x6b,0x02,0x71,0xa3,0x90,
++0x9e,0x3c,0x12,0x43,0x6b,0x02,0x75,0xea,0x90,0x01,0xc6,0xe0,0x44,0x01,0xf0,0x22,
++0x90,0x00,0x04,0x12,0x42,0x20,0xff,0x54,0x1f,0xfe,0xef,0x54,0x20,0xc4,0x13,0x54,
++0x07,0xfd,0xaf,0x06,0x90,0x9e,0x3f,0xef,0xf0,0xa3,0xed,0xf0,0xa3,0x12,0x43,0x8b,
++0x90,0x9e,0x41,0x12,0x43,0x6b,0x90,0x00,0x03,0x12,0x42,0x20,0x54,0xf0,0xc4,0x54,
++0x0f,0x90,0x9e,0x44,0xf0,0x90,0x00,0x04,0x12,0x42,0x20,0x54,0x40,0xc4,0x13,0x13,
++0x54,0x03,0x90,0x9e,0x45,0xf0,0x90,0x9e,0x3f,0xe0,0xff,0x75,0xf0,0x09,0x90,0x96,
++0x46,0x12,0x43,0x5f,0xad,0x82,0xac,0x83,0x90,0x9e,0x46,0xec,0xf0,0xa3,0xed,0xf0,
++0xef,0x75,0xf0,0x09,0xa4,0x24,0x44,0xf9,0x74,0x96,0x35,0xf0,0xfa,0x7b,0x01,0xa3,
++0x12,0x43,0x8b,0x90,0x9e,0x41,0x12,0x43,0x6b,0x90,0x00,0x03,0x12,0x42,0x20,0x54,
++0x0f,0xff,0x90,0x9e,0x48,0x12,0x43,0x6b,0xef,0x12,0x42,0x4d,0x90,0x9e,0x41,0x12,
++0x43,0x6b,0x90,0x00,0x02,0x12,0x42,0x20,0xff,0x90,0x9e,0x48,0x12,0x43,0x6b,0x90,
++0x00,0x01,0xef,0x12,0x42,0x5f,0x90,0x9e,0x41,0x12,0x43,0x6b,0x90,0x00,0x01,0x12,
++0x42,0x20,0xff,0x90,0x9e,0x46,0xe0,0xfc,0xa3,0xe0,0xfd,0xf5,0x82,0x8c,0x83,0xef,
++0xf0,0x12,0x24,0x62,0x8d,0x82,0x8c,0x83,0xa3,0xf0,0x90,0x9e,0x44,0xe0,0xfe,0x90,
++0x9e,0x3f,0xe0,0xff,0x24,0x82,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xee,0xf0,0x90,
++0x9e,0x40,0xe0,0xfe,0x75,0xf0,0x09,0xef,0x90,0x96,0x4a,0x12,0x43,0x5f,0xee,0xf0,
++0x75,0xf0,0x09,0xef,0x90,0x96,0x4b,0x12,0x43,0x5f,0x74,0x01,0xf0,0x90,0x9e,0x45,
++0xe0,0xfe,0x75,0xf0,0x09,0xef,0x90,0x96,0x4c,0x12,0x43,0x5f,0xee,0xf0,0x8f,0x59,
++0xef,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xaf,0x82,0xf5,0x5b,0x8f,0x5c,
++0xe5,0x59,0x75,0xf0,0x02,0xa4,0x24,0x02,0xf9,0x74,0x95,0x35,0xf0,0x75,0x5d,0x01,
++0xf5,0x5e,0x89,0x5f,0x75,0xf0,0x09,0xe5,0x59,0x90,0x96,0x46,0x12,0x43,0x5f,0xaf,
++0x82,0x85,0x83,0x60,0x8f,0x61,0xe5,0x59,0x75,0xf0,0x09,0xa4,0x24,0x44,0xf9,0x74,
++0x96,0x35,0xf0,0x75,0x62,0x01,0xf5,0x63,0x89,0x64,0x74,0x82,0x25,0x59,0xf5,0x82,
++0xe4,0x34,0x95,0xf5,0x83,0xe0,0x12,0x43,0x94,0x55,0x1e,0x00,0x55,0x33,0x01,0x55,
++0x48,0x02,0x55,0x5d,0x03,0x55,0x86,0x04,0x55,0x9b,0x05,0x55,0xb0,0x06,0x55,0xd6,
++0x0c,0x56,0x03,0x0d,0x56,0x30,0x0e,0x56,0x5d,0x0f,0x00,0x00,0x56,0x91,0xe5,0x59,
++0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0x74,0xf0,0xf0,0xa3,0x74,
++0x15,0x80,0x3c,0xe5,0x59,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,
++0x74,0xf0,0xf0,0xa3,0x74,0x10,0x80,0x27,0xe5,0x59,0x25,0xe0,0x24,0xc6,0xf5,0x82,
++0xe4,0x34,0x9b,0xf5,0x83,0x74,0xf0,0xf0,0xa3,0x74,0x05,0x80,0x12,0xe5,0x59,0x25,
++0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0x74,0xf0,0xf0,0xa3,0xe4,0xf0,
++0xe5,0x59,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0x74,0x0f,0xf0,
++0xa3,0x74,0x8f,0xf0,0xc1,0x91,0xe5,0x59,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,
++0x9b,0xf5,0x83,0x74,0x0f,0xf0,0xa3,0x74,0xf5,0x80,0x27,0xe5,0x59,0x25,0xe0,0x24,
++0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0x74,0x0f,0xf0,0xa3,0x74,0xf0,0x80,0x12,
++0xe5,0x59,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe4,0xf0,0xa3,
++0x74,0x0d,0xf0,0xe5,0x59,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,
++0xe4,0xf0,0xa3,0xf0,0xc1,0x91,0x90,0x04,0x47,0xe0,0xab,0x5d,0xaa,0x5e,0xa9,0x5f,
++0x12,0x42,0x4d,0x90,0x04,0x46,0xe0,0xab,0x5d,0xaa,0x5e,0xa9,0x5f,0x90,0x00,0x01,
++0x12,0x42,0x5f,0x90,0x04,0x45,0xe0,0x85,0x5c,0x82,0x85,0x5b,0x83,0xf0,0x90,0x04,
++0x44,0xc1,0x88,0x90,0x04,0x4b,0xe0,0xab,0x5d,0xaa,0x5e,0xa9,0x5f,0x12,0x42,0x4d,
++0x90,0x04,0x4a,0xe0,0xab,0x5d,0xaa,0x5e,0xa9,0x5f,0x90,0x00,0x01,0x12,0x42,0x5f,
++0x90,0x04,0x49,0xe0,0x85,0x5c,0x82,0x85,0x5b,0x83,0xf0,0x90,0x04,0x48,0x80,0x58,
++0x90,0x04,0x4f,0xe0,0xab,0x5d,0xaa,0x5e,0xa9,0x5f,0x12,0x42,0x4d,0x90,0x04,0x4e,
++0xe0,0xab,0x5d,0xaa,0x5e,0xa9,0x5f,0x90,0x00,0x01,0x12,0x42,0x5f,0x90,0x04,0x4d,
++0xe0,0x85,0x5c,0x82,0x85,0x5b,0x83,0xf0,0x90,0x04,0x4c,0x80,0x2b,0x90,0x04,0x53,
++0xe0,0xab,0x5d,0xaa,0x5e,0xa9,0x5f,0x12,0x42,0x4d,0x90,0x04,0x52,0xe0,0xab,0x5d,
++0xaa,0x5e,0xa9,0x5f,0x90,0x00,0x01,0x12,0x42,0x5f,0x90,0x04,0x51,0xe0,0x85,0x5c,
++0x82,0x85,0x5b,0x83,0xf0,0x90,0x04,0x50,0xe0,0x85,0x5c,0x82,0x85,0x5b,0x83,0xa3,
++0xf0,0xab,0x5d,0xaa,0x5e,0xa9,0x5f,0xc0,0x03,0xc0,0x02,0xc0,0x01,0x12,0x24,0x62,
++0xff,0xab,0x62,0xaa,0x63,0xa9,0x64,0x12,0x24,0x62,0x5f,0xd0,0x01,0xd0,0x02,0xd0,
++0x03,0x12,0x42,0x4d,0xab,0x5d,0xe5,0x5f,0x24,0x01,0xf9,0xe4,0x35,0x5e,0xfa,0xc0,
++0x03,0xc0,0x02,0xc0,0x01,0x12,0x24,0x62,0xff,0xab,0x62,0xaa,0x63,0xa9,0x64,0x90,
++0x00,0x01,0x12,0x42,0x20,0x5f,0xd0,0x01,0xd0,0x02,0xd0,0x03,0x12,0x42,0x4d,0x85,
++0x5c,0x82,0x85,0x5b,0x83,0xc0,0x83,0xc0,0x82,0xe0,0xff,0x85,0x61,0x82,0x85,0x60,
++0x83,0xe0,0xfe,0xef,0x5e,0xd0,0x82,0xd0,0x83,0xf0,0x85,0x5c,0x82,0x85,0x5b,0x83,
++0xa3,0xc0,0x83,0xc0,0x82,0xe0,0xff,0x85,0x61,0x82,0x85,0x60,0x83,0xa3,0xe0,0xfe,
++0xef,0x5e,0xd0,0x82,0xd0,0x83,0xf0,0xe5,0x59,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,
++0x34,0x95,0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0x4e,0x60,0x3b,0x75,0x5a,0x0b,0x74,0x01,
++0x7e,0x00,0xa8,0x5a,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0xe5,
++0x59,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0,0x5e,0xfe,0xa3,
++0xe0,0x5f,0x4e,0x60,0x06,0xe5,0x5a,0x24,0x10,0x80,0x5d,0x15,0x5a,0xe5,0x5a,0xc3,
++0x94,0x00,0x50,0xca,0x80,0x56,0xe5,0x59,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,
++0x9b,0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0x4e,0x60,0x3d,0x75,0x5a,0x0f,0x74,0x01,0x7e,
++0x00,0xa8,0x5a,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0xe5,0x59,
++0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe0,0x5e,0xfe,0xa3,0xe0,
++0x5f,0x4e,0x60,0x08,0x90,0x9e,0x4b,0xe5,0x5a,0xf0,0x80,0x10,0x15,0x5a,0xe5,0x5a,
++0xc3,0x94,0x00,0x50,0xc8,0x80,0x05,0xe4,0x90,0x9e,0x4b,0xf0,0xe5,0x59,0x25,0xe0,
++0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0x4e,0x60,0x3b,
++0xe4,0xf5,0x5a,0x74,0x01,0x7e,0x00,0xa8,0x5a,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,
++0xce,0xd8,0xf9,0xff,0xe5,0x59,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,
++0x83,0xe0,0x5e,0xfe,0xa3,0xe0,0x5f,0x4e,0x60,0x08,0x90,0x9e,0x4c,0xe5,0x5a,0xf0,
++0x80,0x5b,0x05,0x5a,0xe5,0x5a,0xb4,0x10,0xca,0x80,0x52,0xe5,0x59,0x25,0xe0,0x24,
++0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0x4e,0x60,0x39,0xe4,
++0xf5,0x5a,0x74,0x01,0x7e,0x00,0xa8,0x5a,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,
++0xd8,0xf9,0xff,0xe5,0x59,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,
++0xe0,0x5e,0xfe,0xa3,0xe0,0x5f,0x4e,0x60,0x06,0xe5,0x5a,0x24,0x10,0x80,0x0a,0x05,
++0x5a,0xe5,0x5a,0xb4,0x0c,0xcc,0x80,0x05,0xe4,0x90,0x9e,0x4c,0xf0,0x90,0x9e,0x4b,
++0xe0,0xff,0x75,0xf0,0x09,0xe5,0x59,0x90,0x96,0x48,0x12,0x43,0x5f,0xef,0xf0,0x90,
++0x9e,0x4c,0xe0,0xfe,0x75,0xf0,0x09,0xe5,0x59,0x90,0x96,0x49,0x12,0x43,0x5f,0xee,
++0xf0,0x74,0x84,0x25,0x59,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0,0xd3,0x9f,0x40,
++0x05,0x90,0x9e,0x4b,0x11,0xe0,0x74,0x84,0x25,0x59,0xf5,0x82,0xe4,0x34,0x04,0xf5,
++0x83,0xe0,0xff,0x90,0x9e,0x4c,0xe0,0xfe,0xef,0xc3,0x9e,0x50,0x02,0x11,0xe0,0x90,
++0x9e,0x4b,0xe0,0xff,0xd3,0x94,0x13,0x40,0x07,0x90,0x96,0x43,0x74,0x03,0xf0,0x22,
++0xef,0xd3,0x94,0x0b,0x40,0x07,0x90,0x96,0x43,0x74,0x02,0xf0,0x22,0xef,0xd3,0x94,
++0x03,0x40,0x07,0x90,0x96,0x43,0x74,0x01,0xf0,0x22,0xe4,0x90,0x96,0x43,0xf0,0x22,
++0xe0,0xfd,0x74,0x26,0x25,0x59,0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0xed,0xf0,0xaf,
++0x59,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0xef,0xc3,0x94,0x20,0x50,0x0e,0x74,0x84,
++0x2f,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xed,0xf0,0x80,0x29,0x74,0xa6,0x2f,0xf5,
++0x82,0xe4,0x34,0x9c,0xf5,0x83,0xed,0xf0,0x90,0x9e,0x78,0xef,0xf0,0x24,0xa6,0xf5,
++0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0x90,0x9e,0x79,0xf0,0x7b,0x01,0x7a,0x9e,0x79,
++0x78,0x7d,0x02,0x31,0x3a,0xd0,0xd0,0x92,0xaf,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,
++0xd0,0x90,0x9e,0x97,0x12,0x43,0x8b,0x90,0x9e,0x9a,0xe0,0x54,0xf0,0x44,0x06,0xff,
++0xf0,0xed,0x54,0x0f,0xc4,0x54,0xf0,0xfe,0xef,0x54,0x0f,0x4e,0xf0,0x90,0x9e,0x97,
++0x12,0x43,0x6b,0x90,0x9e,0x94,0x12,0x43,0x8b,0x7b,0x01,0x7a,0x9e,0x79,0x9a,0xd1,
++0x14,0xd0,0xd0,0x92,0xaf,0x22,0x8f,0x50,0x8d,0x51,0xe5,0x51,0x54,0x1f,0xf5,0x56,
++0x74,0x01,0x2f,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83,0xe0,0xf5,0x54,0x90,0x04,0xfd,
++0xe0,0xb4,0x01,0x05,0x75,0x57,0x03,0x80,0x03,0x75,0x57,0x01,0xeb,0xc3,0x95,0x57,
++0x40,0x04,0xaf,0x50,0x80,0x33,0xe5,0x54,0x25,0x53,0xf5,0x55,0xe5,0x56,0x90,0x41,
++0xd6,0x93,0xff,0xe5,0x55,0xd3,0x9f,0x74,0x01,0x40,0x11,0x25,0x50,0xf5,0x82,0xe4,
++0x34,0x94,0xf5,0x83,0xe4,0xf0,0xad,0x51,0xaf,0x50,0x01,0xf1,0x25,0x50,0xf5,0x82,
++0xe4,0x34,0x94,0xf5,0x83,0xe5,0x55,0xf0,0x22,0xad,0x07,0x75,0xf0,0x09,0xed,0x90,
++0x96,0x48,0x12,0x43,0x5f,0xe0,0xff,0x74,0x67,0x2d,0xf5,0x82,0xe4,0x34,0x9d,0xf5,
++0x83,0xe0,0x54,0x1f,0xf5,0x58,0xd3,0x9f,0x40,0x02,0x8f,0x58,0xe5,0x58,0x25,0xe0,
++0x24,0x9e,0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83,0xe4,0x93,0xfe,0x74,0x01,0x93,0xff,
++0xe5,0x58,0x25,0xe0,0x24,0x66,0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83,0x74,0x01,0x93,
++0x2f,0xff,0xe4,0x93,0x3e,0xc3,0x13,0xfe,0xef,0x13,0xff,0xed,0x25,0xe0,0x24,0xc2,
++0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xee,0xf0,0xa3,0xef,0xf0,0xaf,0x05,0xad,0x58,
++0x11,0xf1,0xaf,0x58,0x22,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0,0x82,0xc0,0xd0,0x75,
++0xd0,0x00,0xc0,0x00,0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0xc0,0x06,
++0xc0,0x07,0x90,0x01,0xc4,0x74,0x45,0xf0,0x74,0x5a,0xa3,0xf0,0x90,0x01,0x34,0xe0,
++0x55,0x28,0xf5,0x2c,0x90,0x01,0x36,0xe0,0x55,0x2a,0xf5,0x2e,0xa3,0xe0,0x55,0x2b,
++0xf5,0x2f,0xe5,0x2c,0x20,0xe0,0x02,0x61,0xe1,0x90,0x01,0x34,0x74,0x01,0xf0,0x85,
++0xd1,0x08,0x85,0xd2,0x09,0x85,0xd3,0x0a,0x85,0xd4,0x0b,0x85,0xd5,0x0c,0x85,0xd6,
++0x0d,0x85,0xd7,0x0e,0x85,0xd9,0x0f,0xe5,0x0f,0x54,0x40,0xc3,0x13,0xff,0xe5,0x0e,
++0x54,0x20,0x6f,0x70,0x02,0x61,0x93,0xe5,0x0f,0x30,0xe5,0x02,0x61,0x93,0xe5,0x0d,
++0x54,0x3f,0xf5,0x4d,0xe5,0x08,0x54,0x3f,0xf5,0x4e,0xe5,0x0c,0x54,0x1f,0xff,0xe5,
++0x4d,0x25,0xe0,0x24,0xc4,0xf5,0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0x8f,0xf0,0x12,
++0x42,0x81,0xe5,0x0e,0x54,0x1f,0xff,0xe5,0x4d,0x25,0xe0,0x24,0x80,0xf5,0x82,0xe4,
++0x34,0x93,0xf5,0x83,0xe4,0x8f,0xf0,0x12,0x42,0x81,0xe5,0x4e,0xd3,0x94,0x04,0x40,
++0x03,0x75,0x4e,0x04,0x75,0xf0,0x0a,0xe5,0x4d,0x90,0x90,0x00,0x12,0x43,0x5f,0x75,
++0xf0,0x02,0xe5,0x4e,0x12,0x43,0x5f,0xe0,0xfe,0xa3,0xe0,0xff,0xe5,0x0e,0x54,0x1f,
++0x2f,0xff,0xe4,0x3e,0xfe,0x75,0xf0,0x0a,0xe5,0x4d,0x90,0x90,0x00,0x12,0x43,0x5f,
++0x75,0xf0,0x02,0xe5,0x4e,0x12,0x43,0x5f,0xee,0xf0,0xa3,0xef,0xf0,0xe5,0x0f,0x20,
++0xe6,0x23,0xe5,0x0e,0x54,0x1f,0xff,0xe5,0x4d,0x25,0xe0,0x24,0xc4,0xf5,0x82,0xe4,
++0x34,0x98,0xf5,0x83,0xe4,0x8f,0xf0,0x12,0x42,0x81,0xe5,0x0a,0x30,0xe7,0x34,0xaf,
++0x4d,0x31,0xd9,0x80,0x2e,0xe5,0x0e,0x54,0x1f,0xff,0xe5,0x4d,0x25,0xe0,0x24,0x44,
++0xf5,0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0x8f,0xf0,0x12,0x42,0x81,0xe5,0x0a,0x30,
++0xe7,0x11,0xe5,0x0a,0x54,0x7f,0xfd,0xe5,0x0e,0x54,0x1f,0xf5,0x53,0xab,0x4e,0xaf,
++0x4d,0x31,0x76,0xe5,0x74,0x14,0x24,0xfd,0x50,0x02,0x80,0x45,0x90,0x9e,0x61,0xe0,
++0x60,0x37,0x90,0x01,0x5b,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x04,0xf0,0xd1,0x05,0xef,
++0x64,0x01,0x70,0x2d,0x90,0x9e,0x55,0xe0,0xf5,0x44,0x75,0x45,0x00,0xe4,0xfb,0xfd,
++0x7f,0x58,0x7e,0x01,0x12,0x30,0x62,0x90,0x01,0x5b,0x74,0x05,0xf0,0x90,0x06,0x92,
++0x74,0x01,0xf0,0x90,0x9e,0x5d,0xf0,0x80,0x08,0xd1,0x05,0xbf,0x01,0x03,0x12,0x44,
++0xd3,0xe5,0x2c,0x30,0xe1,0x20,0x90,0x01,0x34,0x74,0x02,0xf0,0x85,0xd1,0x13,0x85,
++0xd2,0x14,0x85,0xd3,0x15,0x85,0xd4,0x16,0x85,0xd5,0x17,0x85,0xd6,0x18,0x85,0xd7,
++0x19,0x85,0xd9,0x1a,0xd1,0x9c,0xe5,0x2c,0x30,0xe3,0x06,0x90,0x01,0x34,0x74,0x08,
++0xf0,0xe5,0x2c,0x30,0xe4,0x09,0x90,0x01,0x34,0x74,0x10,0xf0,0x43,0x12,0x10,0xe5,
++0x2c,0x30,0xe5,0x26,0x90,0x01,0xcf,0xe0,0x30,0xe5,0x1f,0xe0,0x54,0xdf,0xf0,0x90,
++0x01,0x34,0x74,0x20,0xf0,0x75,0xa8,0x00,0x75,0xe8,0x00,0x12,0x4d,0xb6,0x90,0x00,
++0x03,0xe0,0x54,0xfb,0xf0,0x12,0x49,0xb9,0x80,0xfe,0xe5,0x2c,0x30,0xe6,0x06,0x90,
++0x01,0x34,0x74,0x40,0xf0,0xe5,0x2e,0x30,0xe1,0x3c,0x90,0x01,0x36,0x74,0x02,0xf0,
++0x43,0x12,0x40,0x90,0x01,0x02,0xe0,0x54,0x03,0x64,0x01,0x70,0x29,0x90,0x01,0x37,
++0xe0,0x30,0xe0,0x0a,0x74,0x01,0xf0,0x90,0x9e,0x66,0xe4,0xf0,0x80,0x18,0x90,0x9e,
++0x66,0xe0,0x04,0xf0,0xe0,0xc3,0x94,0x0a,0x40,0x0c,0xe4,0xf0,0x90,0x04,0x19,0xe0,
++0x30,0xe0,0x03,0x12,0x4f,0xa7,0xe5,0x2e,0x30,0xe0,0x12,0x90,0x9e,0x76,0x74,0x01,
++0xf0,0x90,0x01,0x36,0xf0,0x12,0x64,0xfe,0x90,0x9e,0x76,0xe4,0xf0,0xe5,0x2e,0x30,
++0xe2,0x78,0x90,0x01,0x36,0x74,0x04,0xf0,0x90,0x01,0xbd,0xe0,0x04,0xf0,0xe5,0x73,
++0x64,0x01,0x70,0x66,0xe5,0x74,0x60,0x62,0xe5,0x74,0x64,0x02,0x60,0x06,0xe5,0x74,
++0x64,0x05,0x70,0x27,0x90,0x06,0xab,0xe0,0x90,0x9e,0x50,0xf0,0x90,0x06,0xaa,0xe0,
++0x90,0x9e,0x5f,0xf0,0x90,0x9e,0x50,0xe0,0x70,0x07,0x90,0x9e,0x5f,0xe0,0xff,0x80,
++0x05,0x90,0x9e,0x50,0xe0,0xff,0x90,0x9e,0x50,0xef,0xf0,0x90,0x9e,0x52,0xe0,0x60,
++0x03,0xe0,0x14,0xf0,0x90,0x9e,0x51,0xe4,0xf0,0x90,0x01,0x57,0xf0,0x90,0x01,0x3c,
++0x74,0x02,0xf0,0x90,0x9e,0x63,0xe0,0x54,0xfd,0xf0,0xe0,0x54,0xef,0xf0,0xe5,0x74,
++0x14,0x24,0xfd,0x50,0x02,0x80,0x03,0x12,0x45,0x53,0xe5,0x2e,0x30,0xe3,0x28,0x90,
++0x01,0x36,0x74,0x08,0xf0,0xe5,0x73,0x64,0x01,0x70,0x1c,0xe5,0x74,0x60,0x18,0x90,
++0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x90,0x9e,0x89,0xe4,0x12,0x44,
++0x52,0x90,0x01,0x57,0x74,0x05,0xf0,0xe5,0x2e,0x30,0xe4,0x2f,0x90,0x01,0x36,0x74,
++0x10,0xf0,0xe5,0x73,0x64,0x01,0x70,0x23,0xe5,0x74,0x60,0x1f,0x90,0x01,0x57,0xe4,
++0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x90,0x9e,0x62,0xe4,0xf0,0x90,0x9e,0x63,0xe0,
++0x54,0xfd,0xf0,0xe0,0x54,0x07,0x70,0x03,0x12,0x44,0xd3,0xe5,0x2e,0x30,0xe5,0x1f,
++0x90,0x01,0x36,0x74,0x20,0xf0,0xe5,0x73,0xb4,0x01,0x14,0xe5,0x74,0x60,0x10,0x90,
++0x9e,0x61,0xe0,0x64,0x02,0x60,0x05,0x12,0x44,0xdc,0x80,0x03,0x12,0x44,0x80,0xe5,
++0x2e,0x30,0xe6,0x1e,0x90,0x01,0x36,0x74,0x40,0xf0,0xe5,0x73,0xb4,0x01,0x13,0xe5,
++0x74,0x60,0x0f,0x90,0x9e,0x63,0xe0,0x54,0xfe,0xf0,0xe0,0x54,0x07,0x70,0x03,0x12,
++0x44,0xd3,0xe5,0x2f,0x30,0xe1,0x08,0x90,0x01,0x37,0x74,0x02,0xf0,0xd1,0xbd,0x74,
++0x45,0x04,0x90,0x01,0xc4,0xf0,0x74,0x5a,0xa3,0xf0,0xd0,0x07,0xd0,0x06,0xd0,0x05,
++0xd0,0x04,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,0xd0,0x82,0xd0,0x83,
++0xd0,0xf0,0xd0,0xe0,0x32,0x90,0x04,0x1b,0xe0,0x54,0x7f,0x64,0x7f,0x7f,0x01,0x60,
++0x02,0x7f,0x00,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x91,0x12,0x43,
++0x8b,0x90,0x9e,0x75,0xe0,0x64,0x02,0x60,0x6e,0x90,0x9e,0x75,0xe0,0x64,0x01,0x70,
++0x66,0x90,0x9e,0xb0,0xe0,0xff,0x04,0xf0,0x90,0x9e,0x91,0x12,0x43,0x6b,0x90,0x00,
++0x01,0xef,0x12,0x42,0x5f,0x7f,0xaf,0x7e,0x01,0xf1,0x3b,0xef,0x60,0x49,0x90,0x9e,
++0x91,0x12,0x43,0x6b,0x8b,0x1e,0x8a,0x1f,0x89,0x20,0x75,0x21,0x02,0x7b,0x01,0x7a,
++0x01,0x79,0xa0,0x12,0x45,0x09,0x90,0x9e,0x94,0x12,0x43,0x6b,0x8b,0x1e,0x8a,0x1f,
++0x89,0x20,0x90,0x9e,0x91,0x12,0x43,0x6b,0x12,0x24,0x62,0xff,0xc4,0x54,0x0f,0xf5,
++0x21,0x7b,0x01,0x7a,0x01,0x79,0xa2,0x12,0x45,0x09,0x90,0x01,0xaf,0x74,0xff,0xf0,
++0x90,0x01,0xcb,0xe0,0x64,0x80,0xf0,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x9e,0x2f,0xe0,
++0x54,0xf0,0x44,0x03,0xf0,0x54,0x0f,0x44,0x80,0xf0,0x7b,0x00,0x7a,0x00,0x79,0x13,
++0x90,0x9e,0x94,0x12,0x43,0x8b,0x0b,0x7a,0x9e,0x79,0x2f,0xc1,0x14,0x7d,0x02,0x7f,
++0x03,0x12,0x31,0x2c,0xe5,0x74,0x14,0x24,0xfd,0x50,0x02,0x80,0x23,0x90,0x9e,0x61,
++0xe0,0x60,0x06,0x7d,0x01,0x7f,0x0c,0x80,0x0f,0x90,0x9e,0x5e,0xe0,0x54,0x0f,0xc3,
++0x94,0x04,0x50,0x07,0x7d,0x01,0x7f,0x04,0x12,0x47,0x1a,0xe4,0xff,0x12,0x48,0x8f,
++0x22,0xd1,0x05,0xef,0x64,0x01,0x60,0x08,0x90,0x01,0xb9,0x74,0x01,0xf0,0x80,0x32,
++0x90,0x9e,0x5d,0xe0,0x60,0x08,0x90,0x01,0xb9,0x74,0x02,0xf0,0x80,0x24,0x90,0x9e,
++0x5c,0xe0,0x60,0x08,0x90,0x01,0xb9,0x74,0x04,0xf0,0x80,0x16,0x90,0x9e,0x60,0xe0,
++0x54,0x0f,0xd3,0x94,0x04,0x40,0x08,0x90,0x01,0xb9,0x74,0x08,0xf0,0x80,0x03,0x7f,
++0x01,0x22,0x90,0x01,0xb8,0x74,0x08,0xf0,0x7f,0x00,0x22,0xd3,0x10,0xaf,0x01,0xc3,
++0xc0,0xd0,0x90,0x9e,0xa0,0xee,0xf0,0xa3,0xef,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0x90,
++0x9e,0xa0,0xe0,0xfe,0xa3,0xe0,0xf5,0x82,0x8e,0x83,0xe0,0x60,0x2d,0xc3,0x90,0x9e,
++0xa3,0xe0,0x94,0xe8,0x90,0x9e,0xa2,0xe0,0x94,0x03,0x40,0x0b,0x90,0x01,0xc6,0xe0,
++0x44,0x10,0xf0,0x7f,0x00,0x80,0x15,0x90,0x9e,0xa2,0xe4,0x75,0xf0,0x01,0x12,0x42,
++0x81,0x7f,0x0a,0x7e,0x00,0x12,0x32,0x15,0x80,0xc5,0x7f,0x01,0xd0,0xd0,0x92,0xaf,
++0x22,0x75,0x30,0x1f,0x75,0x31,0x01,0xe4,0xf5,0x32,0x90,0x01,0x38,0xe5,0x30,0xf0,
++0xa3,0xe5,0x31,0xf0,0xa3,0xe5,0x32,0xf0,0x22,0x90,0x00,0x02,0xe0,0x54,0xe0,0x90,
++0x9e,0x75,0x60,0x04,0x74,0x01,0xf0,0x22,0x74,0x02,0xf0,0x22,0x90,0x00,0xf3,0xe0,
++0x30,0xe3,0x08,0x90,0x9e,0x77,0x74,0x01,0xf0,0x80,0x05,0xe4,0x90,0x9e,0x77,0xf0,
++0x90,0x9e,0x77,0xe0,0xb4,0x01,0x12,0x90,0x00,0xf2,0xe0,0x30,0xe7,0x0b,0x90,0x9e,
++0x64,0x74,0xfd,0xf0,0xa3,0x74,0x33,0xf0,0x22,0x90,0x9e,0x64,0x74,0xfd,0xf0,0xa3,
++0x74,0x2f,0xf0,0x22,0x90,0x01,0x64,0x74,0xa0,0xf0,0x22,0xc0,0xe0,0xc0,0xf0,0xc0,
++0x83,0xc0,0x82,0xc0,0xd0,0x75,0xd0,0x00,0xc0,0x00,0xc0,0x01,0xc0,0x02,0xc0,0x03,
++0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0x90,0x01,0xc4,0x74,0xfb,0xf0,0x74,0x5f,
++0xa3,0xf0,0x53,0x91,0xef,0x90,0x00,0x51,0xe0,0xff,0x90,0x00,0x55,0xe0,0x5f,0xf5,
++0x3d,0xe5,0x3d,0x30,0xe6,0x18,0x74,0x40,0xf0,0x90,0x9e,0x1d,0xe0,0x54,0x03,0xff,
++0xbf,0x03,0x0b,0x90,0x9e,0x1a,0xe0,0x60,0x05,0x7f,0x01,0x12,0x4a,0xd6,0xe5,0x3d,
++0x30,0xe7,0x15,0x90,0x00,0x55,0x74,0x80,0xf0,0x90,0x9e,0x1d,0xe0,0x54,0x03,0xff,
++0xbf,0x03,0x05,0x7f,0x02,0x12,0x4a,0xd6,0x90,0x01,0xc4,0x74,0xfb,0xf0,0x74,0x5f,
++0xa3,0xf0,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04,0xd0,0x03,0xd0,0x02,0xd0,0x01,
++0xd0,0x00,0xd0,0xd0,0xd0,0x82,0xd0,0x83,0xd0,0xf0,0xd0,0xe0,0x32,0x8f,0x6b,0x8c,
++0x6c,0x8d,0x6d,0x22,0x8f,0x6e,0x8c,0x6f,0x8d,0x70,0x22,0xe4,0xf5,0x73,0x90,0x9e,
++0x63,0xf0,0xf5,0x74,0x90,0x9e,0x60,0x74,0x0c,0xf0,0x90,0x9e,0x5e,0xf0,0xe4,0x90,
++0x9e,0x61,0xf0,0x90,0x9e,0x5d,0xf0,0x90,0x9e,0x5c,0xf0,0x90,0x9e,0x5f,0x04,0xf0,
++0x90,0x9e,0x50,0xf0,0xe4,0x90,0x9e,0x62,0xf0,0x90,0x9e,0x52,0xf0,0x90,0x9e,0x5a,
++0x74,0x07,0xf0,0xe4,0x90,0x9e,0x51,0xf0,0x90,0x9e,0x58,0xf0,0xa3,0x74,0x02,0xf0,
++0x90,0x9e,0x56,0x14,0xf0,0xa3,0x74,0x03,0xf0,0x90,0x9e,0x55,0x74,0x14,0xf0,0x90,
++0x9e,0x5b,0x74,0x05,0xf0,0xe4,0x90,0x9e,0x54,0xf0,0x90,0x9e,0x4f,0xf0,0x90,0x9e,
++0x76,0xf0,0x22,0xe4,0x90,0x9e,0x62,0xf0,0x90,0x9e,0x51,0xf0,0x90,0x9e,0x63,0xf0,
++0x22,0x8b,0x59,0x8a,0x5a,0x89,0x5b,0x31,0x03,0xab,0x59,0xaa,0x5a,0xa9,0x5b,0x12,
++0x24,0x62,0xf5,0x74,0x14,0x60,0x0e,0x14,0x60,0x1e,0x14,0x60,0x2f,0x24,0x03,0x70,
++0x40,0x7f,0x01,0x80,0x3a,0xab,0x59,0xaa,0x5a,0xa9,0x5b,0x90,0x00,0x02,0x12,0x42,
++0x20,0xfd,0xe4,0xff,0x31,0x72,0x80,0x27,0xab,0x59,0xaa,0x5a,0xa9,0x5b,0x90,0x00,
++0x02,0x12,0x42,0x20,0xfd,0x7f,0x01,0x31,0x72,0x1f,0x80,0x13,0xab,0x59,0xaa,0x5a,
++0xa9,0x5b,0x90,0x00,0x02,0x12,0x42,0x20,0xfd,0x7f,0x02,0x31,0x72,0xe4,0xff,0x31,
++0xc6,0x22,0xef,0x24,0xfe,0x60,0x0b,0x04,0x70,0x22,0x90,0x9e,0x5f,0x74,0x01,0xf0,
++0x80,0x16,0xed,0x70,0x0a,0x90,0x9e,0x5b,0xe0,0x90,0x9e,0x5f,0xf0,0x80,0x05,0x90,
++0x9e,0x5f,0xed,0xf0,0x90,0x9e,0x5f,0xe0,0x90,0x9e,0x50,0xf0,0x22,0xd3,0x10,0xaf,
++0x01,0xc3,0xc0,0xd0,0x90,0x00,0x01,0x12,0x42,0x20,0x90,0x9e,0x61,0xf0,0x90,0x00,
++0x03,0x12,0x42,0x20,0x90,0x9e,0x4f,0xf0,0x12,0x24,0x62,0x65,0x74,0x60,0x02,0x31,
++0x11,0xd0,0xd0,0x92,0xaf,0x22,0xef,0x64,0x01,0x70,0x30,0x7d,0x7c,0x7f,0x02,0x12,
++0x31,0x2c,0x7d,0x02,0x7f,0x03,0x12,0x31,0x2c,0x90,0x01,0x57,0xe4,0xf0,0x90,0x01,
++0x3c,0x74,0x02,0xf0,0x12,0x47,0x16,0xe4,0xff,0x12,0x48,0x8f,0x90,0x06,0x04,0xe0,
++0x54,0x7f,0xf0,0x90,0x06,0x0a,0xe0,0x54,0xf8,0xf0,0x22,0x90,0x01,0x36,0x74,0x7c,
++0xf0,0xa3,0x74,0x02,0xf0,0x7d,0x7c,0xff,0x12,0x31,0x9d,0x7d,0x02,0x7f,0x03,0x12,
++0x31,0x9d,0x90,0x06,0x04,0xe0,0x44,0x80,0xf0,0x90,0x06,0x0a,0xe0,0x44,0x07,0xf0,
++0x90,0x9e,0x58,0xe0,0xa3,0xe0,0x90,0x05,0x58,0xf0,0xe5,0x73,0x30,0xe0,0x1b,0x90,
++0x9e,0x52,0xe0,0x70,0x1a,0xe0,0x04,0xf0,0x90,0x9e,0x5e,0xe0,0x54,0x0f,0xc3,0x94,
++0x04,0x50,0x0c,0x7d,0x01,0x7f,0x04,0x02,0x47,0x1a,0xe4,0x90,0x9e,0x52,0xf0,0x22,
++0x12,0x5e,0x05,0xef,0x64,0x01,0x60,0x08,0x90,0x01,0xb9,0x74,0x01,0xf0,0x80,0x52,
++0x90,0x9e,0x63,0xe0,0x54,0x03,0x60,0x08,0x90,0x01,0xb9,0x74,0x02,0xf0,0x80,0x42,
++0x90,0x9e,0x60,0xe0,0x54,0x0f,0xd3,0x94,0x02,0x40,0x08,0x90,0x01,0xb9,0x74,0x04,
++0xf0,0x80,0x2f,0x90,0x9e,0x63,0xe0,0x30,0xe2,0x08,0x90,0x01,0xb9,0x74,0x08,0xf0,
++0x80,0x20,0x90,0x9e,0x63,0xe0,0x30,0xe4,0x08,0x90,0x01,0xb9,0x74,0x10,0xf0,0x80,
++0x11,0x90,0x9e,0x52,0xe0,0x60,0x08,0x90,0x01,0xb9,0x74,0x20,0xf0,0x80,0x03,0x7f,
++0x01,0x22,0x90,0x01,0xb8,0x74,0x04,0xf0,0x7f,0x00,0x22,0xe5,0x12,0x60,0x08,0x90,
++0x01,0xb9,0x74,0x01,0xf0,0x80,0x5e,0x90,0x9e,0x60,0xe0,0x54,0x0f,0xd3,0x94,0x01,
++0x40,0x08,0x90,0x01,0xb9,0x74,0x02,0xf0,0x80,0x4b,0x90,0x02,0x87,0xe0,0x60,0x08,
++0x90,0x01,0xb9,0x74,0x04,0xf0,0x80,0x3d,0x90,0x9e,0x75,0xe0,0xb4,0x02,0x10,0x90,
++0x9e,0x64,0xe0,0xfe,0xa3,0xe0,0xf5,0x82,0x8e,0x83,0xe0,0x60,0x17,0x80,0x26,0x90,
++0x9e,0x75,0xe0,0xb4,0x01,0x0e,0x90,0x01,0xaf,0xe0,0x60,0x08,0x90,0x01,0xb9,0x74,
++0x08,0xf0,0x80,0x11,0x90,0x9e,0x54,0xe0,0x70,0x08,0x90,0x01,0xb9,0x74,0x10,0xf0,
++0x80,0x03,0x7f,0x01,0x22,0x90,0x01,0xb8,0x74,0x02,0xf0,0x7f,0x00,0x22,0x90,0x06,
++0x04,0xe0,0x54,0xbf,0xf0,0xef,0x60,0x09,0xe5,0x73,0xb4,0x01,0x04,0xe4,0xff,0x71,
++0x4d,0x90,0x9e,0x5e,0xe0,0x54,0xf0,0xf0,0xe0,0x44,0x0c,0xf0,0x22,0x8f,0x76,0x90,
++0x9e,0x5e,0xe0,0x90,0x01,0xc1,0xf0,0xa3,0xe5,0x12,0xf0,0x12,0x45,0xb1,0xef,0x64,
++0x01,0x70,0x2e,0x90,0x9e,0x69,0x12,0x47,0xfa,0xe5,0x76,0x60,0x10,0x74,0x21,0x2f,
++0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x10,0xf0,0x80,0x0e,0x74,0x21,0x2f,
++0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xef,0xf0,0x90,0x04,0x1f,0x74,0x20,
++0xf0,0x22,0x90,0x9e,0xaf,0xef,0xf0,0x71,0xb0,0x90,0x9e,0xaf,0xe0,0x60,0x05,0x90,
++0x05,0x22,0xe4,0xf0,0x90,0x9e,0x5e,0xe0,0x54,0xf0,0xf0,0xe0,0x44,0x04,0xf0,0x22,
++0x90,0x00,0x11,0xe0,0x44,0x09,0xf0,0x12,0x49,0xb9,0x90,0x9d,0xff,0x12,0x43,0x53,
++0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x78,0x7e,0x08,0x12,0x2b,0x08,0x90,0x9e,0x03,
++0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x04,0x7e,0x0c,0x12,0x2b,0x08,
++0x90,0x9e,0x07,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x00,0x7e,0x08,
++0x12,0x2b,0x08,0x90,0x9e,0x0b,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,
++0x70,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x68,0x12,0x25,0x14,0x00,0x03,0x2d,0x95,
++0xe4,0xfd,0xff,0x12,0x30,0x2c,0x90,0x9e,0x77,0xe0,0xb4,0x01,0x11,0x90,0x80,0x68,
++0x12,0x25,0x14,0x00,0x03,0x2d,0x95,0xe4,0xfd,0x7f,0x01,0x12,0x30,0x2c,0x22,0x8f,
++0x27,0xe4,0x90,0x9e,0xa8,0xf0,0xa3,0xf0,0x90,0x01,0x09,0xe0,0x7f,0x00,0x30,0xe7,
++0x02,0x7f,0x01,0xef,0x65,0x27,0x60,0x3e,0xc3,0x90,0x9e,0xa9,0xe0,0x94,0x88,0x90,
++0x9e,0xa8,0xe0,0x94,0x13,0x40,0x08,0x90,0x01,0xc6,0xe0,0x44,0x80,0xf0,0x22,0x90,
++0x9e,0xa8,0xe4,0x75,0xf0,0x01,0x12,0x42,0x81,0x7f,0x14,0x7e,0x00,0x12,0x32,0x15,
++0xd3,0x90,0x9e,0xa9,0xe0,0x94,0x32,0x90,0x9e,0xa8,0xe0,0x94,0x00,0x40,0xb9,0x90,
++0x01,0xc7,0xe0,0x30,0xe0,0xb2,0x22,0x90,0x9e,0x5e,0xe0,0x54,0xf0,0xf0,0xe0,0x44,
++0x01,0xf0,0x12,0x44,0xff,0x12,0x45,0x00,0xe0,0x54,0xf0,0xf0,0xe0,0x44,0x02,0xf0,
++0x22,0x90,0x9e,0x60,0xe0,0x30,0xe6,0x1c,0xe0,0x54,0x0f,0xff,0x90,0x9e,0x4e,0xe0,
++0xfe,0x4f,0x90,0x01,0x2f,0xf0,0xee,0x64,0x80,0x90,0x9e,0x4e,0xf0,0x90,0x9e,0x60,
++0xe0,0x54,0xbf,0xf0,0x22,0x8f,0x75,0x12,0x45,0xb1,0xef,0x64,0x01,0x70,0x2e,0x90,
++0x9e,0x6a,0x12,0x47,0xfa,0xe5,0x75,0x60,0x10,0x74,0x21,0x2f,0xf5,0x82,0xe4,0x34,
++0xfc,0xf5,0x83,0xe0,0x44,0x10,0xf0,0x80,0x0e,0x74,0x21,0x2f,0xf5,0x82,0xe4,0x34,
++0xfc,0xf5,0x83,0xe0,0x54,0xef,0xf0,0x90,0x04,0x1f,0x74,0x20,0xf0,0x22,0xe4,0x90,
++0x9e,0x2f,0xf0,0xe5,0x74,0x60,0x6a,0xe5,0x73,0x64,0x01,0x70,0x64,0xe5,0x74,0x14,
++0x60,0x29,0x24,0xfd,0x60,0x25,0x24,0x02,0x24,0xfb,0x50,0x02,0x80,0x23,0x90,0x9e,
++0x50,0xe0,0x14,0xf0,0xe0,0x60,0x04,0xa3,0xe0,0x60,0x16,0x90,0x9e,0x50,0xe0,0x70,
++0x0a,0x90,0x9e,0x5f,0xe0,0x90,0x9e,0x50,0xf0,0x80,0x00,0x90,0x9e,0x2f,0x74,0x01,
++0xf0,0x90,0x9e,0x2f,0xe0,0x60,0x2a,0x90,0x9e,0x63,0xe0,0x44,0x10,0xf0,0xe4,0x90,
++0x9e,0x89,0xf0,0x90,0x9e,0x5a,0x12,0x44,0x56,0x90,0x01,0x57,0x74,0x05,0xf0,0x90,
++0x9e,0x5e,0xe0,0x54,0x0f,0xc3,0x94,0x04,0x50,0x07,0x7d,0x01,0x7f,0x04,0x12,0x47,
++0x1a,0x22,0xef,0xc3,0x94,0x20,0x50,0x39,0xef,0x30,0xe0,0x17,0xed,0xc4,0x54,0xf0,
++0xfd,0xef,0xc3,0x13,0xfe,0x24,0xa4,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0,0x54,
++0x0f,0x80,0x10,0xef,0xc3,0x13,0xfe,0x24,0xa4,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,
++0xe0,0x54,0xf0,0xf0,0x74,0xa4,0x2e,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0,0x4d,
++0xf0,0x22,0xad,0x07,0xed,0xc3,0x94,0x20,0x50,0x0d,0x74,0x84,0x2d,0xf5,0x82,0xe4,
++0x34,0x04,0xf5,0x83,0xe0,0x80,0x0b,0x74,0xa6,0x2d,0xf5,0x82,0xe4,0x34,0x9c,0xf5,
++0x83,0xe0,0x54,0x7f,0xf5,0x64,0xe5,0x64,0x54,0x1f,0xfc,0x75,0xf0,0x09,0xed,0x90,
++0x96,0x48,0x12,0x43,0x5f,0xe0,0xff,0x90,0x9e,0x3e,0xf0,0xed,0x25,0xe0,0x24,0x02,
++0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0,0xfb,0xa3,0xe0,0x90,0x9e,0x3f,0xcb,0xf0,
++0xa3,0xeb,0xf0,0xed,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe0,
++0xfb,0xa3,0xe0,0x90,0x9e,0x41,0xcb,0xf0,0xa3,0xeb,0xf0,0xec,0x25,0xe0,0x24,0x66,
++0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83,0xe4,0x93,0xfa,0x74,0x01,0x93,0xfb,0xed,0x25,
++0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xea,0xf0,0xa3,0xeb,0xf0,0xec,
++0xc3,0x9f,0x40,0x02,0xc1,0xc9,0x74,0x67,0x2d,0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,
++0xec,0xf0,0x04,0xfb,0x90,0x9e,0x3e,0xe0,0xff,0xeb,0xd3,0x9f,0x40,0x02,0xc1,0xfa,
++0xeb,0xc3,0x94,0x10,0x40,0x21,0xeb,0x24,0xf0,0xff,0x74,0x01,0x7e,0x00,0xa8,0x07,
++0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x9e,0x3f,0xe0,0x5e,
++0xfe,0xa3,0xe0,0x5f,0x4e,0x70,0x23,0xeb,0xc3,0x94,0x10,0x50,0x39,0x74,0x01,0x7e,
++0x00,0xa8,0x03,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x9e,
++0x41,0xe0,0x5e,0xfe,0xa3,0xe0,0x5f,0x4e,0x60,0x1c,0xeb,0x64,0x13,0x60,0x08,0xeb,
++0x64,0x12,0x60,0x03,0xbb,0x11,0x09,0x90,0x9e,0x3f,0xe0,0x30,0xe0,0x02,0x7b,0x18,
++0xac,0x03,0x8c,0x64,0x80,0x34,0x0b,0x80,0x8b,0x90,0x9e,0x3e,0xe0,0xfb,0x6c,0x70,
++0x69,0x74,0x67,0x2d,0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0xec,0xf0,0x75,0xf0,0x09,
++0xed,0x90,0x96,0x4a,0x12,0x43,0x5f,0xe0,0xb4,0x01,0x0c,0xe5,0x64,0x20,0xe6,0x07,
++0xec,0x44,0x40,0xf5,0x64,0x80,0x03,0xaf,0x64,0x22,0xec,0x25,0xe0,0x24,0x9e,0xf5,
++0x82,0xe4,0x34,0x41,0xf5,0x83,0xe4,0x93,0xfe,0x74,0x01,0x93,0xff,0xec,0x25,0xe0,
++0x24,0x66,0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83,0x74,0x01,0x93,0x2f,0xff,0xe4,0x93,
++0x3e,0xc3,0x13,0xfe,0xef,0x13,0xff,0xed,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,
++0x95,0xf5,0x83,0xee,0xf0,0xa3,0xef,0xf0,0x80,0x5b,0xec,0xd3,0x9b,0x40,0x56,0x90,
++0x9e,0x3e,0xe0,0xff,0x74,0x67,0x2d,0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0xef,0xf0,
++0xac,0x07,0x8f,0x64,0xec,0x25,0xe0,0x24,0x9e,0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83,
++0xe4,0x93,0xfe,0x74,0x01,0x93,0xff,0xec,0x25,0xe0,0x24,0x66,0xf5,0x82,0xe4,0x34,
++0x41,0xf5,0x83,0x74,0x01,0x93,0x2f,0xff,0xe4,0x93,0x3e,0xc3,0x13,0xfe,0xef,0x13,
++0xff,0xed,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xee,0xf0,0xa3,
++0xef,0xf0,0xaf,0x64,0x22,0x74,0x01,0x2d,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83,0xe4,
++0xf0,0xaf,0x05,0xe5,0x64,0x44,0x80,0xfd,0x12,0x58,0xf1,0xe5,0x64,0x44,0x80,0xff,
++0x22,0xac,0x07,0xec,0xc3,0x94,0x20,0x50,0x0d,0x74,0x84,0x2c,0xf5,0x82,0xe4,0x34,
++0x04,0xf5,0x83,0xe0,0x80,0x0b,0x74,0xa6,0x2c,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,
++0xe0,0x54,0x7f,0xf5,0x64,0xe5,0x64,0x54,0x1f,0xff,0x90,0x9e,0x40,0xf0,0x75,0xf0,
++0x09,0xec,0x90,0x96,0x49,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x42,0xf0,0x75,0xf0,0x09,
++0xec,0x90,0x96,0x48,0x12,0x43,0x5f,0xe0,0xfe,0x90,0x9e,0x43,0xf0,0xec,0x25,0xe0,
++0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe0,0xfb,0xa3,0xe0,0x90,0x9e,0x44,
++0xcb,0xf0,0xa3,0xeb,0xf0,0xec,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,
++0x83,0xe0,0xfb,0xa3,0xe0,0x90,0x9e,0x46,0xcb,0xf0,0xa3,0xeb,0xf0,0xef,0xd3,0x9e,
++0x40,0x0a,0x90,0x9e,0x43,0xe0,0x90,0x9e,0x40,0xf0,0xf5,0x64,0xed,0x70,0x02,0x21,
++0x07,0x90,0x9e,0x41,0xed,0xf0,0xe5,0x64,0x30,0xe6,0x0a,0x90,0x9e,0x40,0xe0,0xf5,
++0x64,0xa3,0xe0,0x14,0xf0,0x90,0x9e,0x41,0xe0,0x70,0x02,0x21,0x07,0x90,0x9e,0x40,
++0xe0,0xff,0xd3,0x94,0x00,0x50,0x02,0x21,0x07,0xe4,0x90,0x9e,0x3f,0xf0,0xef,0x14,
++0x90,0x9e,0x3e,0xf0,0x90,0x9e,0x42,0xe0,0xfd,0x90,0x9e,0x3e,0xe0,0xff,0xd3,0x9d,
++0x40,0x6b,0xef,0x94,0x10,0x40,0x21,0xef,0x24,0xf0,0xff,0x74,0x01,0x7e,0x00,0xa8,
++0x07,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x9e,0x46,0xe0,
++0x5e,0xfe,0xa3,0xe0,0x5f,0x4e,0x70,0x27,0x90,0x9e,0x3e,0xe0,0xff,0xc3,0x94,0x10,
++0x50,0x33,0x74,0x01,0x7e,0x00,0xa8,0x07,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,
++0xd8,0xf9,0xff,0x90,0x9e,0x44,0xe0,0x5e,0xfe,0xa3,0xe0,0x5f,0x4e,0x60,0x16,0x90,
++0x9e,0x3e,0xe0,0xf5,0x64,0xa3,0xe0,0x04,0xf0,0x90,0x9e,0x41,0xe0,0xff,0x90,0x9e,
++0x3f,0xe0,0x6f,0x60,0x08,0x90,0x9e,0x3e,0xe0,0x14,0xf0,0x80,0x87,0x90,0x9e,0x41,
++0xe0,0xff,0x90,0x9e,0x3f,0xe0,0xc3,0x9f,0x50,0x0d,0x90,0x9e,0x3e,0xe0,0xb5,0x05,
++0x06,0x90,0x9e,0x42,0xe0,0xf5,0x64,0xe5,0x64,0x25,0xe0,0x24,0x9e,0xf5,0x82,0xe4,
++0x34,0x41,0xf5,0x83,0xe4,0x93,0xfe,0x74,0x01,0x93,0xff,0xe5,0x64,0x25,0xe0,0x24,
++0x66,0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83,0x74,0x01,0x93,0x2f,0xff,0xe4,0x93,0x3e,
++0xc3,0x13,0xfe,0xef,0x13,0xff,0xec,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,
++0xf5,0x83,0xee,0xf0,0xa3,0xef,0xf0,0xaf,0x04,0xad,0x64,0x12,0x58,0xf1,0xaf,0x64,
++0x22,0xe4,0xf5,0x59,0xe5,0x59,0xb4,0x20,0x14,0x90,0x9a,0xc5,0xe0,0x04,0xf0,0x90,
++0x95,0x01,0xe0,0xff,0x90,0x9a,0xc5,0xe0,0xb5,0x07,0x02,0xe4,0xf0,0x75,0xf0,0x09,
++0xe5,0x59,0x90,0x96,0x4b,0x12,0x43,0x5f,0xe0,0x64,0x01,0x60,0x02,0xe1,0x95,0xe5,
++0x59,0x25,0xe0,0x24,0x80,0xf5,0x82,0xe4,0x34,0x93,0xf5,0x83,0xe0,0xfe,0xa3,0xe0,
++0xd3,0x94,0x00,0xee,0x94,0x00,0x50,0x02,0xe1,0x95,0xe5,0x59,0x94,0x20,0x40,0x08,
++0x90,0x9a,0xc5,0xe0,0x60,0x02,0xe1,0xa0,0xe5,0x59,0x75,0xf0,0x0a,0xa4,0x24,0x00,
++0xf9,0x74,0x90,0x35,0xf0,0x75,0x5e,0x01,0xf5,0x5f,0x89,0x60,0xe5,0x59,0x25,0xe0,
++0x24,0x80,0xf5,0x82,0xe4,0x34,0x93,0xf5,0x83,0xe0,0xff,0xa3,0xe0,0x90,0x9e,0x38,
++0xcf,0xf0,0xa3,0xef,0xf0,0xe5,0x59,0x25,0xe0,0x24,0xc4,0xf5,0x82,0xe4,0x34,0x98,
++0xf5,0x83,0xe0,0xff,0xa3,0xe0,0x90,0x9e,0x3a,0xcf,0xf0,0xa3,0xef,0xf0,0xe5,0x59,
++0xc3,0x94,0x20,0x50,0x14,0x74,0x84,0x25,0x59,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,
++0xe0,0x54,0x3f,0x90,0x9e,0x34,0xf0,0x80,0x12,0x74,0xa6,0x25,0x59,0xf5,0x82,0xe4,
++0x34,0x9c,0xf5,0x83,0xe0,0x54,0x3f,0x90,0x9e,0x34,0xf0,0x90,0x9e,0x34,0xe0,0xfe,
++0x54,0x1f,0xa3,0xf0,0x75,0xf0,0x09,0xe5,0x59,0x90,0x96,0x48,0x12,0x43,0x5f,0xe0,
++0x90,0x9e,0x3d,0xf0,0x74,0xe6,0x25,0x59,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,
++0xc3,0x94,0x05,0x40,0x02,0x81,0x6e,0x90,0x9e,0x3d,0xe0,0xff,0x90,0x9e,0x35,0xe0,
++0x9f,0x40,0x13,0x90,0x9e,0x3d,0xe0,0x90,0x9e,0x35,0xf0,0xee,0x54,0x40,0xfe,0x90,
++0x9e,0x34,0xf0,0xef,0x4e,0xf0,0x90,0x04,0xfd,0xe0,0x64,0x01,0x70,0x29,0x90,0x9e,
++0x35,0xe0,0xff,0x90,0x41,0x4a,0x93,0xfe,0x74,0x44,0x25,0x59,0xf5,0x82,0xe4,0x34,
++0x9a,0xf5,0x83,0xe0,0xc3,0x9e,0x40,0x06,0xef,0x90,0x40,0xda,0x80,0x30,0x90,0x9e,
++0x35,0xe0,0x90,0x40,0xf6,0x80,0x27,0x90,0x9e,0x35,0xe0,0xff,0x90,0x41,0x4a,0x93,
++0xfe,0x74,0x44,0x25,0x59,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xc3,0x9e,0x40,
++0x06,0xef,0x90,0x41,0x12,0x80,0x07,0x90,0x9e,0x35,0xe0,0x90,0x41,0x2e,0x93,0x90,
++0x9e,0x3c,0xf0,0x90,0x9e,0x3c,0xe0,0x75,0xf0,0x06,0xa4,0x24,0x50,0xf9,0x74,0x40,
++0x35,0xf0,0x75,0x5b,0xff,0xf5,0x5c,0x89,0x5d,0x90,0x9e,0x34,0xe0,0x90,0x41,0xf2,
++0x93,0xff,0xd3,0x90,0x9e,0x3b,0xe0,0x9f,0x90,0x9e,0x3a,0xe0,0x94,0x00,0x40,0x09,
++0xe4,0xfd,0xaf,0x59,0x12,0x67,0xb1,0xe1,0x2c,0xe5,0x59,0x25,0xe0,0x24,0xc2,0xf5,
++0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0,0xf5,0x61,0xa3,0xe0,0xf5,0x62,0xab,0x5b,0xaa,
++0x5c,0xa9,0x5d,0x12,0x24,0x62,0xff,0x7e,0x00,0xab,0x5e,0xaa,0x5f,0xa9,0x60,0x12,
++0x42,0x97,0xfd,0xac,0xf0,0x12,0x24,0x7b,0xef,0x25,0x62,0xf5,0x62,0xee,0x35,0x61,
++0xf5,0x61,0xab,0x5b,0xaa,0x5c,0xa9,0x5d,0x90,0x00,0x01,0x12,0x42,0x20,0xff,0x7e,
++0x00,0xab,0x5e,0xaa,0x5f,0xa9,0x60,0x90,0x00,0x02,0x12,0x42,0xc2,0xfd,0xac,0xf0,
++0x12,0x24,0x7b,0xef,0x25,0x62,0xf5,0x62,0xee,0x35,0x61,0xf5,0x61,0xab,0x5b,0xaa,
++0x5c,0xa9,0x5d,0x90,0x00,0x02,0x12,0x42,0x20,0xff,0x7e,0x00,0xab,0x5e,0xaa,0x5f,
++0xa9,0x60,0x90,0x00,0x04,0x12,0x42,0xc2,0xfd,0xac,0xf0,0x12,0x24,0x7b,0xef,0x25,
++0x62,0xf5,0x62,0xee,0x35,0x61,0xf5,0x61,0xab,0x5b,0xaa,0x5c,0xa9,0x5d,0x90,0x00,
++0x03,0x12,0x42,0x20,0xff,0x7e,0x00,0xab,0x5e,0xaa,0x5f,0xa9,0x60,0x90,0x00,0x06,
++0x12,0x42,0xc2,0xfd,0xac,0xf0,0x12,0x24,0x7b,0xef,0x25,0x62,0xf5,0x62,0xee,0x35,
++0x61,0xf5,0x61,0xab,0x5b,0xaa,0x5c,0xa9,0x5d,0x90,0x00,0x04,0x12,0x42,0x20,0xff,
++0x7e,0x00,0xab,0x5e,0xaa,0x5f,0xa9,0x60,0x90,0x00,0x08,0x12,0x42,0xc2,0xfd,0xac,
++0xf0,0x12,0x24,0x7b,0xef,0x25,0x62,0xf5,0x62,0xee,0x35,0x61,0xf5,0x61,0xab,0x5b,
++0xaa,0x5c,0xa9,0x5d,0x90,0x00,0x05,0x12,0x42,0x20,0xff,0x7e,0x00,0x90,0x9e,0x38,
++0xe0,0xfc,0xa3,0xe0,0xfd,0x12,0x24,0x7b,0xd3,0xe5,0x62,0x9f,0xe5,0x61,0x9e,0x40,
++0x0c,0xe5,0x62,0x9f,0xf5,0x62,0xe5,0x61,0x9e,0xf5,0x61,0x80,0x05,0xe4,0xf5,0x61,
++0xf5,0x62,0xe5,0x59,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe5,
++0x61,0xf0,0xa3,0xe5,0x62,0xf0,0x90,0x9e,0x34,0xe0,0x25,0xe0,0x24,0x66,0xf5,0x82,
++0xe4,0x34,0x41,0xf5,0x83,0xc3,0x74,0x01,0x93,0x95,0x62,0xe4,0x93,0x95,0x61,0x50,
++0x07,0xaf,0x59,0x12,0x65,0xb2,0xe1,0x00,0x90,0x9e,0x34,0xe0,0x25,0xe0,0x24,0x9e,
++0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83,0xd3,0x74,0x01,0x93,0x95,0x62,0xe4,0x93,0x95,
++0x61,0x50,0x02,0xe1,0x00,0x7d,0x01,0xaf,0x59,0x12,0x67,0xb1,0xe1,0x00,0x74,0xe6,
++0x25,0x59,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0xfc,0x64,0x05,0x60,0x02,0xc1,
++0x09,0x90,0x96,0x43,0xe0,0xff,0xb4,0x03,0x0b,0x90,0x9e,0x35,0xe0,0xc3,0x94,0x19,
++0x40,0x3d,0x80,0x2e,0xef,0xb4,0x02,0x0b,0x90,0x9e,0x35,0xe0,0xc3,0x94,0x11,0x40,
++0x2e,0x80,0x1f,0x90,0x96,0x43,0xe0,0xff,0xb4,0x01,0x0b,0x90,0x9e,0x35,0xe0,0xc3,
++0x94,0x0a,0x40,0x1b,0x80,0x0c,0xef,0x70,0x11,0x90,0x9e,0x35,0xe0,0xc3,0x94,0x03,
++0x40,0x0d,0x90,0x9a,0x84,0x74,0x01,0xf0,0x80,0x05,0xe4,0x90,0x9a,0x84,0xf0,0x74,
++0x84,0x25,0x59,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe0,0xf5,0x63,0x74,0x44,0x25,
++0x59,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xff,0xc3,0x94,0x30,0x50,0x02,0xa1,
++0xb6,0x90,0x9a,0x84,0xe0,0x64,0x01,0x60,0x02,0xa1,0xb6,0x74,0x85,0x25,0x59,0xf5,
++0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0x64,0x0a,0x60,0x51,0xef,0x24,0x05,0xff,0xe4,
++0x33,0xfe,0x74,0x41,0x25,0x59,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83,0xe0,0xfd,0xd3,
++0x9f,0xee,0x64,0x80,0xf8,0x74,0x80,0x98,0x50,0x32,0xed,0x24,0x05,0xff,0xe4,0x33,
++0xfe,0x74,0x44,0x25,0x59,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xd3,0x9f,0xee,
++0x64,0x80,0xf8,0x74,0x80,0x98,0x50,0x14,0x74,0x26,0x25,0x59,0xf5,0x82,0xe4,0x34,
++0x9d,0xf5,0x83,0xe0,0xff,0x90,0x9e,0x35,0xe0,0x6f,0x60,0x3d,0x74,0x44,0x25,0x59,
++0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xff,0xd3,0x94,0x42,0x40,0x05,0x75,0x63,
++0x05,0x80,0x0e,0xef,0xd3,0x94,0x39,0x40,0x05,0x75,0x63,0x03,0x80,0x03,0x75,0x63,
++0x01,0x74,0x41,0x25,0x59,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83,0xef,0xf0,0x74,0x85,
++0x25,0x59,0xf5,0x82,0xe4,0x34,0x9a,0x80,0x29,0x74,0xe6,0x25,0x59,0xf5,0x82,0xe4,
++0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x74,0x85,0x25,0x59,0xf5,0x82,0xe4,0x34,0x9a,0xf5,
++0x83,0xe0,0x04,0xf0,0x80,0x10,0xe4,0xf5,0x63,0x74,0xe6,0x25,0x59,0xf5,0x82,0xe4,
++0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x90,0x9e,0x35,0xe0,0xff,0x74,0x26,0x25,0x59,0xf5,
++0x82,0xe4,0x34,0x9d,0xf5,0x83,0xef,0xf0,0x74,0x84,0x25,0x59,0xf5,0x82,0xe4,0x34,
++0x98,0xf5,0x83,0xe5,0x63,0xf0,0x75,0xf0,0x09,0xe5,0x59,0x90,0x96,0x4c,0x12,0x43,
++0x5f,0xe0,0xb4,0x01,0x10,0xe4,0xf5,0x63,0x74,0xe6,0x25,0x59,0xf5,0x82,0xe4,0x34,
++0x9c,0xf5,0x83,0xe4,0xf0,0xad,0x63,0xc1,0xfb,0xec,0x64,0x06,0x60,0x02,0xe1,0x00,
++0xf5,0x61,0xf5,0x62,0x90,0x42,0x13,0x93,0xff,0x7e,0x00,0x90,0x9e,0x38,0xe0,0xfc,
++0xa3,0xe0,0xfd,0x12,0x24,0x7b,0x90,0x9e,0x36,0xee,0xf0,0xa3,0xef,0xf0,0x74,0x84,
++0x25,0x59,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe0,0xf5,0x63,0xe4,0xf5,0x5a,0xab,
++0x5e,0xaa,0x5f,0xa9,0x60,0x75,0xf0,0x02,0xe5,0x5a,0xa4,0xf5,0x82,0x85,0xf0,0x83,
++0x12,0x42,0xc2,0xfd,0xac,0xf0,0xe5,0x5a,0x90,0x42,0x0e,0x93,0xff,0x7e,0x00,0x12,
++0x24,0x7b,0xef,0x25,0x62,0xf5,0x62,0xee,0x35,0x61,0xf5,0x61,0xc3,0x90,0x9e,0x37,
++0xe0,0x95,0x62,0x90,0x9e,0x36,0xe0,0x95,0x61,0x40,0x07,0x05,0x5a,0xe5,0x5a,0xb4,
++0x05,0xbd,0xe5,0x5a,0xc3,0x13,0xf5,0x5a,0xe5,0x63,0xb4,0x01,0x06,0xe5,0x5a,0x70,
++0x46,0x80,0x13,0xe5,0x63,0xb4,0x03,0x15,0xe5,0x5a,0x70,0x05,0x75,0x63,0x03,0x80,
++0x39,0xe5,0x5a,0xb4,0x01,0x05,0x75,0x63,0x01,0x80,0x2f,0x80,0x2a,0xe5,0x63,0xb4,
++0x05,0x28,0xe5,0x5a,0x70,0x05,0x75,0x63,0x05,0x80,0x0d,0xe5,0x5a,0xb4,0x01,0x05,
++0x75,0x63,0x03,0x80,0x03,0x75,0x63,0x01,0xd3,0x90,0x9e,0x3b,0xe0,0x94,0x03,0x90,
++0x9e,0x3a,0xe0,0x94,0x00,0x40,0x03,0xe4,0xf5,0x63,0xd3,0x90,0x9e,0x3b,0xe0,0x94,
++0x03,0x90,0x9e,0x3a,0xe0,0x94,0x00,0x40,0x03,0xe4,0xf5,0x63,0x74,0x84,0x25,0x59,
++0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe5,0x63,0xf0,0xfd,0xaf,0x59,0x12,0x65,0x72,
++0x74,0xe6,0x25,0x59,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0xd3,0x94,0x05,0x74,
++0xe6,0x50,0x0e,0x25,0x59,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0x04,0xf0,0x80,
++0x0b,0x25,0x59,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe4,0xf0,0xab,0x5e,0xaa,0x5f,
++0xa9,0x60,0xe4,0xf5,0xf0,0x12,0x42,0xfa,0xab,0x5e,0xaa,0x5f,0xa9,0x60,0x90,0x00,
++0x02,0xe4,0xf5,0xf0,0x12,0x43,0x19,0x90,0x00,0x04,0xe4,0xf5,0xf0,0x12,0x43,0x19,
++0x90,0x00,0x06,0xe4,0xf5,0xf0,0x12,0x43,0x19,0x90,0x00,0x08,0xe4,0xf5,0xf0,0x12,
++0x43,0x19,0xe5,0x59,0x25,0xe0,0x24,0x80,0xf5,0x82,0xe4,0x34,0x93,0xf5,0x83,0xe4,
++0xf0,0xa3,0xf0,0xe5,0x59,0x25,0xe0,0x24,0xc4,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,
++0xe4,0xf0,0xa3,0xf0,0xe5,0x59,0x25,0xe0,0x24,0x44,0xf5,0x82,0xe4,0x34,0x99,0xf5,
++0x83,0xe4,0xf0,0xa3,0xf0,0x05,0x59,0xe5,0x59,0xc3,0x94,0x40,0x50,0x02,0x21,0x54,
++0x22,0x90,0x04,0x44,0x74,0x11,0xf0,0xa3,0x74,0xf0,0xf0,0xa3,0x74,0x0f,0xf0,0xa3,
++0xe4,0xf0,0xfd,0x74,0xa4,0x2d,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe4,0xf0,0x0d,
++0xbd,0x10,0xf0,0xe4,0x90,0x9a,0xc5,0xf0,0x90,0x95,0x01,0x04,0xf0,0xe4,0xfd,0x75,
++0xf0,0x0a,0xed,0x90,0x90,0x00,0x12,0x43,0x5f,0xe4,0xf0,0xa3,0xf0,0x75,0xf0,0x0a,
++0xed,0x90,0x90,0x02,0x12,0x43,0x5f,0xe4,0xf0,0xa3,0xf0,0x75,0xf0,0x0a,0xed,0x90,
++0x90,0x04,0x12,0x43,0x5f,0xe4,0xf0,0xa3,0xf0,0x75,0xf0,0x0a,0xed,0x90,0x90,0x06,
++0x12,0x43,0x5f,0xe4,0xf0,0xa3,0xf0,0x75,0xf0,0x0a,0xed,0x90,0x90,0x08,0x12,0x43,
++0x5f,0xe4,0xf0,0xa3,0xf0,0x74,0x26,0x2d,0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0x74,
++0x13,0xf0,0x74,0x85,0x2d,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe4,0xf0,0x74,0x84,
++0x2d,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe4,0xf0,0xed,0x25,0xe0,0x24,0x80,0xf5,
++0x82,0xe4,0x34,0x93,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,0xed,0x25,0xe0,0x24,0xc4,0xf5,
++0x82,0xe4,0x34,0x98,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,0xed,0x25,0xe0,0x24,0xc4,0xf5,
++0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,0xed,0x25,0xe0,0x24,0x44,0xf5,
++0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,0xed,0x25,0xe0,0x24,0xc6,0xf5,
++0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,0xed,0x25,0xe0,0x24,0x46,0xf5,
++0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,0x74,0x86,0x2d,0xf5,0x82,0xe4,
++0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x74,0x46,0x2d,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,
++0xe4,0xf0,0x74,0xe6,0x2d,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x90,0x41,
++0xc4,0x93,0xfe,0x74,0x01,0x93,0xff,0x90,0x41,0x8c,0x74,0x01,0x93,0x2f,0xff,0xe4,
++0x93,0x3e,0xc3,0x13,0xfe,0xef,0x13,0xff,0xed,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,
++0x34,0x95,0xf5,0x83,0xee,0xf0,0xa3,0xef,0xf0,0x75,0xf0,0x09,0xed,0x90,0x96,0x4b,
++0x12,0x43,0x5f,0x74,0x01,0xf0,0x75,0xf0,0x09,0xed,0x90,0x96,0x4a,0x12,0x43,0x5f,
++0x74,0x01,0xf0,0x74,0x82,0x2d,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0x74,0x0c,0xf0,
++0x75,0xf0,0x09,0xed,0x90,0x96,0x46,0x12,0x43,0x5f,0x74,0xff,0xf0,0xa3,0xf0,0x75,
++0xf0,0x09,0xed,0x90,0x96,0x44,0x12,0x43,0x5f,0xe4,0xf0,0xa3,0x74,0x0f,0xf0,0x75,
++0xf0,0x09,0xed,0x90,0x96,0x48,0x12,0x43,0x5f,0x74,0x13,0xf0,0x75,0xf0,0x09,0xed,
++0x90,0x96,0x49,0x12,0x43,0x5f,0xe4,0xf0,0xed,0xc3,0x94,0x20,0x50,0x0f,0x74,0x84,
++0x2d,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0x74,0x13,0xf0,0x80,0x0d,0x74,0xa6,0x2d,
++0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0x74,0x13,0xf0,0x0d,0xed,0x64,0x40,0x60,0x03,
++0x02,0x6f,0xcf,0x22,0x12,0x24,0x62,0xf5,0x59,0xc3,0x94,0x40,0x50,0x15,0x90,0x00,
++0x02,0x12,0x42,0x20,0xff,0x74,0x44,0x25,0x59,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,
++0xef,0xf0,0x22,0xe5,0x59,0xb4,0x40,0x0a,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x96,
++0x42,0xf0,0x22,0x90,0x00,0x04,0x12,0x42,0x20,0xff,0x54,0x3f,0xfe,0xef,0x54,0x80,
++0xc4,0x13,0x13,0x13,0x54,0x01,0xfd,0xaf,0x06,0x02,0x53,0xa4,0x12,0x24,0x62,0x90,
++0x95,0x01,0xf0,0x22,0x12,0x24,0x62,0xf5,0x73,0x22,0x90,0x00,0x02,0x12,0x42,0x20,
++0xff,0x30,0xe0,0x25,0x12,0x24,0x62,0x90,0x9e,0x56,0xf0,0x90,0x00,0x01,0x12,0x42,
++0x20,0x90,0x9e,0x57,0xf0,0xef,0xc3,0x13,0x54,0x7f,0x90,0x9e,0x55,0xf0,0x90,0x00,
++0x03,0x12,0x42,0x20,0x90,0x9e,0x5b,0xf0,0x22,0x90,0x9e,0x56,0x74,0x01,0xf0,0x90,
++0x9e,0x57,0x74,0x03,0xf0,0x90,0x9e,0x55,0x74,0x14,0xf0,0x90,0x9e,0x5b,0x74,0x05,
++0xf0,0x22,0x12,0x24,0x62,0x30,0xe0,0x18,0xc3,0x13,0x54,0x7f,0x90,0x9e,0x5a,0xf0,
++0x90,0x00,0x01,0x12,0x42,0x20,0xff,0x90,0x9e,0x58,0xe4,0xf0,0xa3,0xef,0xf0,0x22,
++0x90,0x9e,0x5a,0x74,0x07,0xf0,0x90,0x9e,0x58,0xe4,0xf0,0xa3,0x74,0x02,0xf0,0x22,
++0x90,0x02,0x09,0xe0,0xfd,0x12,0x24,0x62,0xfe,0xaf,0x05,0xed,0x2e,0x90,0x9e,0x67,
++0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0xff,0xed,0x2f,0x90,0x9e,0x68,0xf0,0x90,0x00,
++0x02,0x12,0x42,0x20,0xff,0xed,0x2f,0x90,0x9e,0x69,0xf0,0x90,0x00,0x03,0x12,0x42,
++0x20,0xff,0xed,0x2f,0x90,0x9e,0x6a,0xf0,0x90,0x00,0x04,0x12,0x42,0x20,0xff,0xae,
++0x05,0xed,0x2f,0x90,0x9e,0x6b,0xf0,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,
++0x9e,0x3f,0x12,0x43,0x8b,0x90,0x9e,0x3f,0x12,0x43,0x6b,0x90,0x00,0x01,0x12,0x42,
++0xc2,0xfa,0xe5,0xf0,0x24,0x00,0xff,0xe4,0x3a,0xfe,0x90,0x9e,0x3f,0x12,0x43,0x6b,
++0x90,0x00,0x01,0xee,0x8f,0xf0,0x12,0x43,0x19,0x12,0x24,0x62,0xff,0x60,0x2c,0xb5,
++0x22,0x16,0x90,0x9e,0x3f,0x12,0x43,0x6b,0x90,0x00,0x01,0x12,0x42,0xc2,0x65,0x24,
++0x70,0x04,0xe5,0x23,0x65,0xf0,0x60,0x23,0x90,0x9e,0x3f,0x12,0x43,0x6b,0x90,0x00,
++0x01,0x12,0x42,0xc2,0xff,0xae,0xf0,0x71,0x00,0x80,0x10,0x90,0x9e,0x3f,0x12,0x43,
++0x6b,0x12,0x24,0x62,0x65,0x22,0x60,0x03,0x12,0x44,0xca,0xd0,0xd0,0x92,0xaf,0x22,
++0x90,0x9e,0x42,0xee,0xf0,0xa3,0xef,0xf0,0x75,0x22,0x01,0x8e,0x23,0xf5,0x24,0xe4,
++0xfd,0x7f,0x0b,0x71,0x44,0xe4,0xfd,0x7f,0x02,0x71,0x44,0x12,0x4f,0xbe,0xe4,0xff,
++0x12,0x44,0xf1,0xe4,0xf5,0x26,0x90,0x01,0xc9,0xe5,0x26,0xf0,0x90,0x9e,0x42,0xe0,
++0xfc,0xa3,0xe0,0xfd,0xec,0xfb,0x8d,0x44,0xe4,0xf5,0x45,0x7d,0x01,0x7f,0x60,0x7e,
++0x01,0x02,0x30,0x62,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x45,0xed,0xf0,
++0x90,0x9e,0x44,0xef,0xf0,0xd3,0x94,0x07,0x50,0x4f,0xa3,0xe0,0x70,0x1a,0x90,0x9e,
++0x44,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,
++0x90,0x00,0x47,0xe0,0x5f,0xf0,0x80,0x17,0x90,0x9e,0x44,0xe0,0xff,0x74,0x01,0xa8,
++0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xff,0x90,0x00,0x47,0xe0,0x4f,0xf0,0x12,
++0x49,0xb9,0x90,0x9e,0x44,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,
++0xd8,0xfc,0xf4,0xff,0x90,0x00,0x46,0x80,0x5a,0x90,0x9e,0x44,0xe0,0x24,0xf8,0xf0,
++0xa3,0xe0,0x70,0x1d,0x90,0x9e,0x44,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,
++0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0,0xf4,0xff,0x90,0x00,0x43,0xe0,0x5f,0xf0,0x80,
++0x1a,0x90,0x9e,0x44,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,
++0xfc,0xc4,0x54,0xf0,0xff,0x90,0x00,0x43,0xe0,0x4f,0xf0,0x12,0x49,0xb9,0x90,0x9e,
++0x44,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,
++0x90,0x00,0x43,0xe0,0x5f,0xf0,0x12,0x49,0xb9,0xd0,0xd0,0x92,0xaf,0x22,0xd3,0x10,
++0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x6d,0xe0,0x90,0x9e,0x40,0xf0,0x90,0x9e,0x6e,
++0xe0,0xf5,0x64,0xa3,0xe0,0xf5,0x65,0xe4,0xf5,0x61,0x74,0x70,0x25,0x61,0xf5,0x82,
++0xe4,0x34,0x9e,0xf5,0x83,0xe0,0xff,0x74,0x66,0x25,0x61,0xf8,0xa6,0x07,0x05,0x61,
++0xe5,0x61,0xb4,0x04,0xe5,0x90,0x9e,0x40,0xe0,0x12,0x43,0x94,0x74,0x6b,0x00,0x75,
++0x93,0x01,0x74,0x71,0x02,0x74,0x71,0x03,0x74,0x71,0x04,0x75,0x93,0x05,0x75,0x63,
++0x80,0x75,0x79,0x81,0x75,0x93,0x82,0x00,0x00,0x75,0x8f,0xaf,0x69,0xb1,0x9a,0xa1,
++0x93,0x90,0x9e,0x40,0xe0,0xff,0xb4,0x02,0x08,0x90,0x9e,0x3f,0x74,0x01,0xf0,0x80,
++0x0f,0xef,0x90,0x9e,0x3f,0xb4,0x03,0x05,0x74,0x02,0xf0,0x80,0x03,0x74,0x04,0xf0,
++0xc3,0xe5,0x64,0x94,0x08,0x50,0x49,0xe4,0xf5,0x61,0x90,0x9e,0x3f,0xe0,0xff,0xe5,
++0x61,0xc3,0x9f,0x40,0x02,0xa1,0x93,0xc3,0xe5,0x64,0x94,0x01,0x50,0x14,0xe5,0x61,
++0x25,0x65,0xff,0xc3,0x74,0x03,0x95,0x61,0x24,0x66,0xf8,0xe6,0xfd,0x12,0x4a,0xc1,
++0x80,0x1a,0xc3,0x74,0x03,0x95,0x61,0x24,0x66,0xf8,0xe6,0xff,0xe5,0x61,0x7c,0x00,
++0x25,0x65,0xfd,0xec,0x35,0x64,0x8d,0x82,0xf5,0x83,0xef,0xf0,0x05,0x61,0x80,0xba,
++0xc3,0xe5,0x64,0x94,0x10,0x40,0x02,0xa1,0x93,0x90,0x9e,0x40,0xe0,0x64,0x04,0x60,
++0x02,0xa1,0x93,0xaf,0x67,0xfc,0xfd,0xfe,0x78,0x10,0x12,0x24,0xf5,0xc0,0x04,0xc0,
++0x05,0xc0,0x06,0xc0,0x07,0xaf,0x66,0xe4,0xfc,0xfd,0xfe,0x78,0x18,0x12,0x24,0xf5,
++0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0x12,0x43,0x46,0xc0,0x04,0xc0,0x05,0xc0,
++0x06,0xc0,0x07,0xaf,0x68,0xe4,0xfc,0xfd,0xfe,0x78,0x08,0x12,0x24,0xf5,0xd0,0x03,
++0xd0,0x02,0xd0,0x01,0xd0,0x00,0x12,0x43,0x46,0xa8,0x04,0xa9,0x05,0xaa,0x06,0xab,
++0x07,0xaf,0x69,0xe4,0xfc,0xfd,0xfe,0x12,0x43,0x46,0xa3,0x12,0x25,0x08,0x90,0x9e,
++0x41,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0xaf,0x65,0xae,0x64,0x12,0x2b,
++0x08,0x80,0x30,0xe5,0x68,0x7f,0x00,0xfe,0xef,0x25,0x69,0xf5,0x63,0xe4,0x3e,0xf5,
++0x62,0xaf,0x63,0xfe,0x12,0x32,0x15,0x80,0x1a,0xe5,0x68,0x7f,0x00,0xfe,0xef,0x25,
++0x69,0xf5,0x63,0xe4,0x3e,0xf5,0x62,0xaf,0x63,0xfe,0x12,0x31,0x82,0x80,0x04,0x7f,
++0x00,0x80,0x02,0x7f,0x01,0xd0,0xd0,0x92,0xaf,0x22,0x8f,0x6a,0xe4,0x90,0x9e,0x45,
++0xf0,0xe5,0x6a,0x14,0xfe,0x90,0x9e,0x45,0xe0,0xff,0xc3,0x9e,0x50,0x0e,0xef,0x04,
++0xfd,0x12,0x2d,0x4d,0x90,0x9e,0x45,0xe0,0x04,0xf0,0x80,0xe5,0xe5,0x6a,0x14,0xff,
++0x7d,0xff,0x12,0x2d,0x4d,0x90,0x9e,0x45,0xe5,0x6a,0xf0,0x90,0x9e,0x45,0xe0,0xc3,
++0x94,0xff,0x50,0x0f,0xe0,0xff,0x04,0xfd,0x12,0x2d,0x4d,0x90,0x9e,0x45,0xe0,0x04,
++0xf0,0x80,0xe8,0xad,0x6a,0x7f,0xff,0x02,0x2d,0x4d,0xd3,0x10,0xaf,0x01,0xc3,0xc0,
++0xd0,0xe4,0xf5,0x5b,0x75,0x5c,0x04,0xf5,0x5d,0xf5,0x5f,0xf5,0x60,0x90,0x02,0x09,
++0xe0,0xff,0x12,0x24,0x62,0xfe,0xef,0x2e,0xf5,0x5e,0x30,0xe0,0x08,0x75,0x59,0x00,
++0x75,0x5a,0x80,0x80,0x05,0xe4,0xf5,0x59,0xf5,0x5a,0xe5,0x5e,0xc3,0x13,0x90,0xfd,
++0x10,0xf0,0x74,0x20,0x25,0x5b,0xf5,0x5b,0xad,0x5a,0xe5,0x5b,0x2d,0xff,0x24,0x01,
++0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x90,0x9e,0x6d,0xf0,0x74,0x02,0x2f,0xf5,
++0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0xfe,0xe5,0x5b,0x2d,0x24,0x03,0xf5,0x82,0xe4,
++0x34,0xfc,0xf5,0x83,0xe0,0x24,0x00,0xff,0xe4,0x3e,0x90,0x9e,0x6e,0xf0,0xa3,0xef,
++0xf0,0x7f,0x04,0xe5,0x5b,0x25,0x5a,0x2f,0x24,0x00,0xf5,0x82,0xe4,0x34,0xfc,0xf5,
++0x83,0xe0,0xfe,0x74,0x6c,0x2f,0xf5,0x82,0xe4,0x34,0x9e,0xf5,0x83,0xee,0xf0,0x0f,
++0xbf,0x08,0xe0,0x91,0x0e,0xef,0x70,0x3f,0x90,0x01,0xc3,0xe0,0x60,0x25,0xc3,0xe5,
++0x60,0x94,0xe8,0xe5,0x5f,0x94,0x03,0x40,0x09,0x90,0x01,0xc6,0xe0,0x44,0x10,0xf0,
++0x80,0x63,0x05,0x60,0xe5,0x60,0x70,0x02,0x05,0x5f,0x7f,0x0a,0x7e,0x00,0x12,0x32,
++0x15,0x80,0xd5,0x90,0x01,0xc6,0xe0,0x90,0x01,0xc3,0x30,0xe2,0x05,0x74,0xfe,0xf0,
++0x80,0x43,0x74,0xff,0xf0,0x80,0x3e,0xe5,0x5b,0xb4,0x78,0x23,0xe4,0xf5,0x5b,0x05,
++0x5e,0xe5,0x5a,0x64,0x80,0x45,0x59,0x70,0x06,0xf5,0x59,0xf5,0x5a,0x80,0x06,0x75,
++0x59,0x00,0x75,0x5a,0x80,0xe5,0x5e,0xc3,0x13,0x90,0xfd,0x10,0xf0,0x80,0x06,0x74,
++0x08,0x25,0x5b,0xf5,0x5b,0xe5,0x5d,0x15,0x5d,0x70,0x02,0x15,0x5c,0xe5,0x5d,0x45,
++0x5c,0x60,0x02,0xc1,0x28,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x06,0x34,0x74,0xff,0xf0,
++0xe4,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x22,0xe4,0xf5,0x25,0x22,0xe4,0x90,0x9e,0xaa,
++0xf0,0xa3,0xf0,0x90,0x05,0xf8,0xe0,0x70,0x0f,0xa3,0xe0,0x70,0x0b,0xa3,0xe0,0x70,
++0x07,0xa3,0xe0,0x70,0x03,0x7f,0x01,0x22,0xd3,0x90,0x9e,0xab,0xe0,0x94,0xe8,0x90,
++0x9e,0xaa,0xe0,0x94,0x03,0x40,0x03,0x7f,0x00,0x22,0x7f,0x32,0x7e,0x00,0x12,0x32,
++0x15,0x90,0x9e,0xaa,0xe4,0x75,0xf0,0x01,0x12,0x42,0x81,0x80,0xc6,0x90,0x9e,0x77,
++0xe0,0x90,0x9e,0x0f,0xf0,0x22,0xef,0x70,0x03,0x02,0x79,0x1e,0x90,0x9e,0x0f,0xe0,
++0x60,0x03,0x02,0x7c,0xe9,0x90,0x9d,0xfb,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,
++0x08,0x7f,0x8c,0x7e,0x08,0x12,0x2b,0x08,0x90,0x9d,0xa7,0x12,0x43,0x53,0x90,0x80,
++0x96,0x12,0x25,0x08,0x7f,0x44,0x7e,0x08,0x12,0x2b,0x08,0x90,0x9d,0xab,0x12,0x43,
++0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x5c,0x7e,0x08,0x12,0x2b,0x08,0x90,0x9d,
++0xaf,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x6c,0x7e,0x0e,0x12,0x2b,
++0x08,0x90,0x9d,0xb3,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x70,0x7e,
++0x0e,0x12,0x2b,0x08,0x90,0x9d,0xb7,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,
++0x7f,0x74,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x9d,0xbb,0x12,0x43,0x53,0x90,0x80,0x96,
++0x12,0x25,0x08,0x7f,0x78,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x9d,0xbf,0x12,0x43,0x53,
++0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x7c,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x9d,0xc3,
++0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x80,0x7e,0x0e,0x12,0x2b,0x08,
++0x90,0x9d,0xc7,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x84,0x7e,0x0e,
++0x12,0x2b,0x08,0x90,0x9d,0xcb,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,
++0x88,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x9d,0xcf,0x12,0x43,0x53,0x90,0x80,0x96,0x12,
++0x25,0x08,0x7f,0x8c,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x9d,0xd3,0x12,0x43,0x53,0x90,
++0x80,0x96,0x12,0x25,0x08,0x7f,0xd0,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x9d,0xd7,0x12,
++0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0xd4,0x7e,0x0e,0x12,0x2b,0x08,0x90,
++0x9d,0xdb,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0xd8,0x7e,0x0e,0x12,
++0x2b,0x08,0x90,0x9d,0xdf,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0xdc,
++0x7e,0x0e,0x12,0x2b,0x08,0x90,0x9d,0xe3,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,
++0x08,0x7f,0xe0,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x9d,0xe7,0x12,0x43,0x53,0x90,0x80,
++0x96,0x12,0x25,0x08,0x7f,0xec,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x9d,0xeb,0x12,0x43,
++0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x04,0x7e,0x0c,0x12,0x2b,0x08,0x90,0x9d,
++0xef,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x04,0x7e,0x0d,0x12,0x2b,
++0x08,0x90,0x9d,0xf3,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x0c,0x7e,
++0x09,0x12,0x2b,0x08,0x90,0x9d,0xf7,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,
++0x7f,0x04,0x7e,0x08,0x12,0x2b,0x08,0x90,0x9e,0x0f,0x74,0x01,0xf0,0x22,0x90,0x9e,
++0x0f,0xe0,0x64,0x01,0x60,0x02,0x81,0xe9,0x7f,0x8c,0x7e,0x08,0x12,0x22,0x65,0x90,
++0x9d,0xfb,0x12,0x25,0x08,0x7f,0x44,0x7e,0x08,0x12,0x22,0x65,0x90,0x9d,0xa7,0x12,
++0x25,0x08,0x7f,0x5c,0x7e,0x08,0x12,0x22,0x65,0x90,0x9d,0xab,0x12,0x25,0x08,0x7f,
++0x6c,0x7e,0x0e,0x12,0x22,0x65,0x90,0x9d,0xaf,0x12,0x25,0x08,0x7f,0x70,0x7e,0x0e,
++0x12,0x22,0x65,0x90,0x9d,0xb3,0x12,0x25,0x08,0x7f,0x74,0x7e,0x0e,0x12,0x22,0x65,
++0x90,0x9d,0xb7,0x12,0x25,0x08,0x7f,0x78,0x7e,0x0e,0x12,0x22,0x65,0x90,0x9d,0xbb,
++0x12,0x25,0x08,0x7f,0x7c,0x7e,0x0e,0x12,0x22,0x65,0x90,0x9d,0xbf,0x12,0x25,0x08,
++0x7f,0x80,0x7e,0x0e,0x12,0x22,0x65,0x90,0x9d,0xc3,0x12,0x25,0x08,0x7f,0x84,0x7e,
++0x0e,0x12,0x22,0x65,0x90,0x9d,0xc7,0x12,0x25,0x08,0x7f,0x88,0x7e,0x0e,0x12,0x22,
++0x65,0x90,0x9d,0xcb,0x12,0x25,0x08,0x7f,0x8c,0x7e,0x0e,0x12,0x22,0x65,0x90,0x9d,
++0xcf,0x12,0x25,0x08,0x7f,0xd0,0x7e,0x0e,0x12,0x22,0x65,0x90,0x9d,0xd3,0x12,0x25,
++0x08,0x7f,0xd4,0x7e,0x0e,0x12,0x22,0x65,0x90,0x9d,0xd7,0x12,0x25,0x08,0x7f,0xd8,
++0x7e,0x0e,0x12,0x22,0x65,0x90,0x9d,0xdb,0x12,0x25,0x08,0x7f,0xdc,0x7e,0x0e,0x12,
++0x22,0x65,0x90,0x9d,0xdf,0x12,0x25,0x08,0x7f,0xe0,0x7e,0x0e,0x12,0x22,0x65,0x90,
++0x9d,0xe3,0x12,0x25,0x08,0x7f,0xec,0x7e,0x0e,0x12,0x22,0x65,0x90,0x9d,0xe7,0x12,
++0x25,0x08,0x7f,0x04,0x7e,0x0c,0x12,0x22,0x65,0x90,0x9d,0xeb,0x12,0x25,0x08,0x7f,
++0x04,0x7e,0x0d,0x12,0x22,0x65,0x90,0x9d,0xef,0x12,0x25,0x08,0x7f,0x0c,0x7e,0x09,
++0x12,0x22,0x65,0x90,0x9d,0xf3,0x12,0x25,0x08,0x7f,0x04,0x7e,0x08,0x12,0x22,0x65,
++0x90,0x9d,0xf7,0x12,0x25,0x08,0x7f,0x8c,0x7e,0x08,0x12,0x22,0x65,0x90,0x9e,0xa4,
++0x12,0x25,0x08,0x90,0x9e,0xa4,0x12,0x43,0x53,0xed,0x44,0xc0,0xfd,0xec,0x90,0x9e,
++0xa4,0x12,0x25,0x08,0x90,0x9e,0xa4,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,
++0x7f,0x8c,0x7e,0x08,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x00,0x01,0x00,
++0x00,0x7f,0x44,0x7e,0x08,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x00,0xdb,
++0x25,0xa4,0x7f,0x5c,0x7e,0x08,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x20,
++0xdb,0x25,0xa4,0x7f,0x6c,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,
++0x20,0xdb,0x25,0xa4,0x7f,0x70,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,
++0x14,0x04,0x1b,0x25,0xa4,0x7f,0x74,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,
++0x25,0x14,0x04,0x1b,0x25,0xa4,0x7f,0x78,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,
++0x12,0x25,0x14,0x04,0x1b,0x25,0xa4,0x7f,0x7c,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,
++0x96,0x12,0x25,0x14,0x04,0x1b,0x25,0xa4,0x7f,0x80,0x7e,0x0e,0x12,0x2b,0x08,0x90,
++0x80,0x96,0x12,0x25,0x14,0x63,0xdb,0x25,0xa4,0x7f,0x84,0x7e,0x0e,0x12,0x2b,0x08,
++0x90,0x80,0x96,0x12,0x25,0x14,0x04,0x1b,0x25,0xa4,0x7f,0x88,0x7e,0x0e,0x12,0x2b,
++0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x20,0xdb,0x25,0xa4,0x7f,0x8c,0x7e,0x0e,0x12,
++0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x20,0xdb,0x25,0xa4,0x7f,0xd0,0x7e,0x0e,
++0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x20,0xdb,0x25,0xa4,0x7f,0xd4,0x7e,
++0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x20,0xdb,0x25,0xa4,0x7f,0xd8,
++0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x00,0x1b,0x25,0xa4,0x7f,
++0xdc,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x00,0x1b,0x25,0xa4,
++0x7f,0xe0,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x24,0xdb,0x25,
++0xa4,0x7f,0xec,0x7e,0x0e,0x12,0x2b,0x08,0x7f,0x04,0x7e,0x0c,0x12,0x22,0x65,0x90,
++0x9e,0xa4,0x12,0x25,0x08,0x90,0x9e,0xa4,0x12,0x43,0x53,0xe4,0xff,0xec,0x90,0x9e,
++0xa4,0x12,0x25,0x08,0x90,0x9e,0xa4,0x12,0x43,0x53,0xef,0x44,0x11,0xff,0xec,0x90,
++0x9e,0xa4,0x12,0x25,0x08,0x90,0x9e,0xa4,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,
++0x08,0x7f,0x04,0x7e,0x0c,0x12,0x2b,0x08,0x7f,0x04,0x7e,0x0d,0x12,0x22,0x65,0x90,
++0x9e,0xa4,0x12,0x25,0x08,0x90,0x9e,0xa4,0x12,0x43,0x53,0xef,0x54,0xf0,0xff,0xec,
++0x90,0x9e,0xa4,0x12,0x25,0x08,0x90,0x9e,0xa4,0x12,0x43,0x53,0xef,0x44,0x01,0xff,
++0xec,0x90,0x9e,0xa4,0x12,0x25,0x08,0x90,0x9e,0xa4,0x12,0x43,0x53,0x90,0x80,0x96,
++0x12,0x25,0x08,0x7f,0x04,0x7e,0x0d,0x12,0x2b,0x08,0x7f,0x0c,0x7e,0x09,0x12,0x22,
++0x65,0x90,0x9e,0xa4,0x12,0x25,0x08,0x90,0x9e,0xa4,0x12,0x43,0x53,0xe4,0xff,0xec,
++0x90,0x9e,0xa4,0x12,0x25,0x08,0x90,0x9e,0xa4,0x12,0x43,0x53,0xef,0x44,0x11,0xff,
++0xec,0x90,0x9e,0xa4,0x12,0x25,0x08,0x90,0x9e,0xa4,0x12,0x43,0x53,0x90,0x80,0x96,
++0x12,0x25,0x08,0x7f,0x0c,0x7e,0x09,0x12,0x2b,0x08,0x7f,0x0c,0x7e,0x09,0x12,0x22,
++0x65,0x90,0x9e,0xa4,0x12,0x25,0x08,0x90,0x9e,0xa4,0x12,0x43,0x53,0xed,0x54,0x0f,
++0xfd,0xec,0x54,0xf0,0xfc,0x90,0x9e,0xa4,0x12,0x25,0x08,0x90,0x9e,0xa4,0x12,0x43,
++0x53,0xed,0x44,0x10,0xfd,0xec,0x44,0x01,0xfc,0x90,0x9e,0xa4,0x12,0x25,0x08,0x90,
++0x9e,0xa4,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x0c,0x7e,0x09,0x12,
++0x2b,0x08,0x7f,0x04,0x7e,0x08,0x12,0x22,0x65,0x90,0x9e,0xa4,0x12,0x25,0x08,0x90,
++0x9e,0xa4,0x12,0x43,0x53,0xef,0x54,0xf0,0xff,0xec,0x90,0x9e,0xa4,0x12,0x25,0x08,
++0x90,0x9e,0xa4,0x12,0x43,0x53,0xef,0x44,0x01,0xff,0xec,0x90,0x9e,0xa4,0x12,0x25,
++0x08,0x90,0x9e,0xa4,0x12,0x43,0x53,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x04,0x7e,
++0x08,0x12,0x2b,0x08,0xe4,0x90,0x9e,0x0f,0xf0,0x22,0x90,0x00,0x02,0x12,0x42,0x20,
++0x90,0x9e,0x1e,0xf0,0xe0,0x60,0x04,0xe0,0xf4,0x70,0x21,0xa2,0xaf,0xe4,0x33,0xf5,
++0x59,0xc2,0xaf,0x90,0x00,0x47,0xe0,0x54,0xfb,0xfd,0x7f,0x47,0x12,0x4a,0xc1,0x7d,
++0x40,0x7f,0x01,0x12,0x31,0x66,0xe5,0x59,0x24,0xff,0x92,0xaf,0x22,0xe4,0xfd,0x7f,
++0x45,0x12,0x4a,0xc1,0x90,0x04,0xfd,0xe4,0xf0,0xa3,0xf0,0x90,0x9e,0x1e,0xf0,0x90,
++0x9e,0x24,0xf0,0x90,0x9e,0x27,0xf0,0x90,0x9e,0x25,0xf0,0x90,0x9e,0x28,0xf0,0x90,
++0x9e,0x26,0xf0,0x90,0x9e,0x29,0xf0,0x90,0x9e,0x10,0x04,0xf0,0xe4,0xa3,0xf0,0xa3,
++0xf0,0xa3,0xf0,0x90,0x9e,0x15,0xf0,0x90,0x9e,0x1a,0xf0,0x90,0x9e,0x1c,0xf0,0x90,
++0x9e,0x2e,0xf0,0x90,0x9e,0x1f,0xf0,0x90,0x9e,0x1b,0xf0,0x90,0x9e,0x14,0xf0,0x90,
++0x00,0x51,0xe0,0x44,0xc0,0xfd,0x7f,0x51,0x02,0x4a,0xc1,0x90,0x9e,0x15,0xe0,0xc3,
++0x94,0x14,0x50,0x05,0xe0,0x04,0xf0,0xc1,0x33,0x90,0x9e,0x15,0xe0,0x64,0x14,0x60,
++0x02,0xc1,0x33,0x90,0x9e,0x24,0xe0,0x70,0x25,0x90,0x9e,0x27,0xe0,0x70,0x1f,0x90,
++0x9e,0x25,0xe0,0x70,0x19,0x90,0x9e,0x28,0xe0,0x70,0x13,0x90,0x9e,0x26,0xe0,0x70,
++0x0d,0x90,0x9e,0x29,0xe0,0x70,0x07,0x90,0x04,0xfd,0xe0,0x54,0xfe,0xf0,0x90,0x9e,
++0x24,0xe0,0x90,0x04,0x44,0xf0,0x90,0x9e,0x25,0xe0,0x90,0x04,0x45,0xf0,0x90,0x9e,
++0x26,0xe0,0x90,0x04,0x46,0xf0,0xa3,0xe4,0xf0,0x90,0x9e,0x27,0xe0,0x90,0x04,0x48,
++0xf0,0x90,0x9e,0x28,0xe0,0x90,0x04,0x49,0xf0,0x90,0x9e,0x29,0xe0,0x90,0x04,0x4a,
++0xf0,0xa3,0xe4,0xf0,0x90,0x9e,0x10,0xe0,0x90,0x04,0x4c,0xf0,0x90,0x9e,0x11,0xe0,
++0x90,0x04,0x4d,0xf0,0x90,0x9e,0x12,0xe0,0x90,0x04,0x4e,0xf0,0x90,0x9e,0x13,0xe0,
++0x90,0x04,0x4f,0xf0,0xe4,0x90,0x9e,0x15,0xf0,0x90,0x9e,0x10,0x04,0xf0,0xe4,0xa3,
++0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x9e,0x24,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,
++0xf0,0xa3,0xf0,0x90,0x05,0x60,0xe0,0x90,0x9e,0x34,0xf0,0x90,0x05,0x61,0xe0,0x90,
++0x9e,0x35,0xf0,0x90,0x05,0x62,0xe0,0x90,0x9e,0x36,0xf0,0x90,0x05,0x63,0xe0,0x90,
++0x9e,0x37,0xf0,0x90,0x9e,0x2d,0xe0,0xff,0x90,0x9e,0x37,0xe0,0xfe,0xd3,0x9f,0x50,
++0x0b,0x90,0x9e,0x2d,0xe0,0xc3,0x9e,0xd3,0x94,0x01,0x40,0x11,0x90,0x9e,0x1b,0xe0,
++0xb4,0x01,0x02,0x80,0x03,0x90,0x9e,0x1f,0xe0,0xff,0x12,0x4e,0xd8,0x22,0x90,0x9e,
++0x2e,0xe0,0x64,0x01,0x60,0x08,0x90,0x9e,0x1c,0xe0,0x60,0x02,0xe1,0x55,0x90,0x9e,
++0x10,0xe0,0xc3,0x94,0xff,0x50,0x05,0xe0,0x04,0xf0,0x80,0x3b,0x90,0x9e,0x11,0xe0,
++0xc3,0x94,0xff,0x50,0x06,0xe0,0x04,0xf0,0xe4,0x80,0x28,0x90,0x9e,0x12,0xe0,0xc3,
++0x94,0xff,0x50,0x0a,0xe0,0x04,0xf0,0xe4,0x90,0x9e,0x11,0xf0,0x80,0x15,0x90,0x9e,
++0x13,0xe0,0xc3,0x94,0xff,0x50,0x10,0xe0,0x04,0xf0,0xe4,0x90,0x9e,0x12,0xf0,0x90,
++0x9e,0x11,0xf0,0x90,0x9e,0x10,0xf0,0x90,0x00,0x44,0xe0,0x54,0x0c,0x60,0x76,0xe0,
++0x30,0xe2,0x32,0x90,0x9e,0x24,0xe0,0xc3,0x94,0xff,0x50,0x05,0xe0,0x04,0xf0,0x80,
++0x24,0x90,0x9e,0x25,0xe0,0xc3,0x94,0xff,0x50,0x06,0xe0,0x04,0xf0,0xe4,0x80,0x11,
++0x90,0x9e,0x26,0xe0,0xc3,0x94,0xff,0x50,0x0c,0xe0,0x04,0xf0,0xe4,0x90,0x9e,0x25,
++0xf0,0x90,0x9e,0x24,0xf0,0x90,0x00,0x44,0xe0,0x30,0xe3,0x32,0x90,0x9e,0x27,0xe0,
++0xc3,0x94,0xff,0x50,0x05,0xe0,0x04,0xf0,0x80,0x24,0x90,0x9e,0x28,0xe0,0xc3,0x94,
++0xff,0x50,0x06,0xe0,0x04,0xf0,0xe4,0x80,0x11,0x90,0x9e,0x29,0xe0,0xc3,0x94,0xff,
++0x50,0x0c,0xe0,0x04,0xf0,0xe4,0x90,0x9e,0x28,0xf0,0x90,0x9e,0x27,0xf0,0x90,0x04,
++0xfd,0xe0,0x44,0x01,0xf0,0x22,0xf5,0x67,};
++
++// =================== v84 UMC B Cut COMMON 2012-04-13 =====================
++u8 Rtl8192CUFwUMCBCutImgArray[UMCBCutImgArrayLength] = {
++0xc2,0x88,0x02,0x00,0x54,0x00,0x01,0x00,0x04,0x13,0x11,0x08,0x26,0x3d,0x01,0x00,
++0x58,0x97,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x02,0x43,0xba,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x02,0x50,0xa1,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x02,0x57,0x91,0x00,0x00,0x00,0x00,0x00,0xa1,0xe8,0x00,0x00,0x00,
++0x05,0x04,0x03,0x02,0x00,0x03,0x06,0x05,0x04,0x03,0x00,0x04,0x06,0x05,0x04,0x02,
++0x00,0x04,0x08,0x07,0x06,0x04,0x00,0x06,0x0a,0x09,0x08,0x06,0x00,0x08,0x0a,0x09,
++0x08,0x04,0x00,0x08,0x0a,0x09,0x08,0x02,0x00,0x08,0x0a,0x09,0x08,0x00,0x00,0x08,
++0x12,0x11,0x10,0x08,0x00,0x10,0x1a,0x19,0x18,0x10,0x00,0x18,0x22,0x21,0x20,0x18,
++0x00,0x20,0x22,0x21,0x20,0x10,0x00,0x20,0x22,0x21,0x20,0x08,0x00,0x20,0x22,0x21,
++0x1c,0x08,0x00,0x20,0x22,0x21,0x14,0x08,0x00,0x20,0x22,0x20,0x18,0x08,0x00,0x20,
++0x31,0x30,0x20,0x10,0x00,0x30,0x31,0x30,0x18,0x00,0x00,0x30,0x31,0x2f,0x10,0x10,
++0x00,0x30,0x31,0x2c,0x10,0x10,0x00,0x30,0x31,0x28,0x10,0x00,0x00,0x30,0x31,0x20,
++0x10,0x00,0x00,0x30,0x31,0x10,0x10,0x00,0x00,0x30,0x04,0x04,0x04,0x05,0x04,0x04,
++0x04,0x05,0x05,0x05,0x06,0x06,0x04,0x04,0x04,0x05,0x05,0x05,0x06,0x06,0x04,0x04,
++0x05,0x05,0x05,0x05,0x06,0x06,0x04,0x04,0x05,0x05,0x05,0x05,0x06,0x07,0x0a,0x0b,
++0x0d,0x10,0x04,0x05,0x05,0x06,0x06,0x09,0x0c,0x11,0x08,0x08,0x09,0x09,0x0a,0x0c,
++0x10,0x11,0x04,0x04,0x04,0x05,0x04,0x04,0x05,0x07,0x07,0x07,0x08,0x0a,0x04,0x04,
++0x04,0x04,0x06,0x0a,0x0b,0x0d,0x05,0x05,0x07,0x07,0x08,0x0b,0x0d,0x0f,0x04,0x04,
++0x04,0x05,0x07,0x07,0x09,0x09,0x0c,0x0e,0x10,0x12,0x04,0x04,0x05,0x05,0x06,0x0a,
++0x11,0x13,0x09,0x09,0x09,0x09,0x0c,0x0e,0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x24,0x26,0x2a,0x18,0x1a,0x1d,0x1f,0x21,0x27,0x29,0x2a,0x00,0x00,
++0x00,0x1f,0x23,0x28,0x2a,0x2c,0x00,0x04,0x00,0x04,0x00,0x08,0x00,0x10,0x00,0x18,
++0x00,0x24,0x00,0x30,0x00,0x48,0x00,0x60,0x00,0x90,0x00,0xc0,0x00,0xd8,0x00,0x50,
++0x00,0x78,0x00,0xa0,0x00,0xc8,0x01,0x40,0x01,0x90,0x01,0xe0,0x02,0x30,0x01,0x2c,
++0x01,0x40,0x01,0xe0,0x02,0xd0,0x03,0xe8,0x04,0xb0,0x06,0x40,0x07,0xd0,0x00,0x02,
++0x00,0x02,0x00,0x04,0x00,0x08,0x00,0x0c,0x00,0x12,0x00,0x18,0x00,0x24,0x00,0x30,
++0x00,0x48,0x00,0x60,0x00,0x6c,0x00,0x28,0x00,0x3c,0x00,0x50,0x00,0x64,0x00,0xa0,
++0x00,0xc8,0x00,0xf0,0x01,0x18,0x00,0x64,0x00,0xa0,0x00,0xf0,0x01,0x68,0x01,0xf4,
++0x02,0x58,0x03,0x20,0x03,0xe8,0x02,0x02,0x02,0x02,0x02,0x02,0x03,0x03,0x04,0x04,
++0x05,0x07,0x04,0x04,0x07,0x0a,0x0a,0x0c,0x0c,0x12,0x05,0x07,0x07,0x08,0x0b,0x12,
++0x24,0x3c,0x01,0x01,0x01,0x01,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x01,0x02,
++0x03,0x04,0x05,0x06,0x07,0x08,0x05,0x06,0x07,0x08,0x09,0x0a,0x0b,0x0c,0x20,0x1e,
++0x1c,0x18,0x10,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0xbb,0x01,0x0c,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe0,0x22,0x50,
++0x06,0xe9,0x25,0x82,0xf8,0xe6,0x22,0xbb,0xfe,0x06,0xe9,0x25,0x82,0xf8,0xe2,0x22,
++0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe4,0x93,0x22,0xbb,0x01,0x06,
++0x89,0x82,0x8a,0x83,0xf0,0x22,0x50,0x02,0xf7,0x22,0xbb,0xfe,0x01,0xf3,0x22,0xf8,
++0xbb,0x01,0x0d,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe8,0xf0,0x22,
++0x50,0x06,0xe9,0x25,0x82,0xc8,0xf6,0x22,0xbb,0xfe,0x05,0xe9,0x25,0x82,0xc8,0xf2,
++0x22,0xc5,0xf0,0xf8,0xa3,0xe0,0x28,0xf0,0xc5,0xf0,0xf8,0xe5,0x82,0x15,0x82,0x70,
++0x02,0x15,0x83,0xe0,0x38,0xf0,0x22,0xbb,0x01,0x0a,0x89,0x82,0x8a,0x83,0xe0,0xf5,
++0xf0,0xa3,0xe0,0x22,0x50,0x06,0x87,0xf0,0x09,0xe7,0x19,0x22,0xbb,0xfe,0x07,0xe3,
++0xf5,0xf0,0x09,0xe3,0x19,0x22,0x89,0x82,0x8a,0x83,0xe4,0x93,0xf5,0xf0,0x74,0x01,
++0x93,0x22,0xbb,0x01,0x10,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe0,
++0xf5,0xf0,0xa3,0xe0,0x22,0x50,0x09,0xe9,0x25,0x82,0xf8,0x86,0xf0,0x08,0xe6,0x22,
++0xbb,0xfe,0x0a,0xe9,0x25,0x82,0xf8,0xe2,0xf5,0xf0,0x08,0xe2,0x22,0xe5,0x83,0x2a,
++0xf5,0x83,0xe9,0x93,0xf5,0xf0,0xa3,0xe9,0x93,0x22,0xbb,0x01,0x0a,0x89,0x82,0x8a,
++0x83,0xf0,0xe5,0xf0,0xa3,0xf0,0x22,0x50,0x06,0xf7,0x09,0xa7,0xf0,0x19,0x22,0xbb,
++0xfe,0x06,0xf3,0xe5,0xf0,0x09,0xf3,0x19,0x22,0xf8,0xbb,0x01,0x11,0xe5,0x82,0x29,
++0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe8,0xf0,0xe5,0xf0,0xa3,0xf0,0x22,0x50,0x09,
++0xe9,0x25,0x82,0xc8,0xf6,0x08,0xa6,0xf0,0x22,0xbb,0xfe,0x09,0xe9,0x25,0x82,0xc8,
++0xf2,0xe5,0xf0,0x08,0xf2,0x22,0xef,0x4b,0xff,0xee,0x4a,0xfe,0xed,0x49,0xfd,0xec,
++0x48,0xfc,0x22,0xe0,0xfc,0xa3,0xe0,0xfd,0xa3,0xe0,0xfe,0xa3,0xe0,0xff,0x22,0xa4,
++0x25,0x82,0xf5,0x82,0xe5,0xf0,0x35,0x83,0xf5,0x83,0x22,0xe0,0xfb,0xa3,0xe0,0xfa,
++0xa3,0xe0,0xf9,0x22,0xf8,0xe0,0xfb,0xa3,0xa3,0xe0,0xf9,0x25,0xf0,0xf0,0xe5,0x82,
++0x15,0x82,0x70,0x02,0x15,0x83,0xe0,0xfa,0x38,0xf0,0x22,0xeb,0xf0,0xa3,0xea,0xf0,
++0xa3,0xe9,0xf0,0x22,0xd0,0x83,0xd0,0x82,0xf8,0xe4,0x93,0x70,0x12,0x74,0x01,0x93,
++0x70,0x0d,0xa3,0xa3,0x93,0xf8,0x74,0x01,0x93,0xf5,0x82,0x88,0x83,0xe4,0x73,0x74,
++0x02,0x93,0x68,0x60,0xef,0xa3,0xa3,0xa3,0x80,0xdf,0x02,0x43,0xf8,0x02,0x48,0x29,
++0xe4,0x93,0xa3,0xf8,0xe4,0x93,0xa3,0x40,0x03,0xf6,0x80,0x01,0xf2,0x08,0xdf,0xf4,
++0x80,0x29,0xe4,0x93,0xa3,0xf8,0x54,0x07,0x24,0x0c,0xc8,0xc3,0x33,0xc4,0x54,0x0f,
++0x44,0x20,0xc8,0x83,0x40,0x04,0xf4,0x56,0x80,0x01,0x46,0xf6,0xdf,0xe4,0x80,0x0b,
++0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80,0x90,0x44,0x3d,0xe4,0x7e,0x01,0x93,0x60,
++0xbc,0xa3,0xff,0x54,0x3f,0x30,0xe5,0x09,0x54,0x1f,0xfe,0xe4,0x93,0xa3,0x60,0x01,
++0x0e,0xcf,0x54,0xc0,0x25,0xe0,0x60,0xa8,0x40,0xb8,0xe4,0x93,0xa3,0xfa,0xe4,0x93,
++0xa3,0xf8,0xe4,0x93,0xa3,0xc8,0xc5,0x82,0xc8,0xca,0xc5,0x83,0xca,0xf0,0xa3,0xc8,
++0xc5,0x82,0xc8,0xca,0xc5,0x83,0xca,0xdf,0xe9,0xde,0xe7,0x80,0xbe,0x41,0x9e,0x77,
++0x00,0x41,0x9e,0xae,0x00,0x41,0x9e,0x54,0x80,0x41,0x9e,0xb0,0x00,0x00,0xf0,0x90,
++0x9e,0x5d,0xe0,0x90,0x9e,0x86,0xf0,0xe4,0xfb,0xfd,0x7f,0x54,0x7e,0x01,0xd3,0x10,
++0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x85,0xe0,0xfb,0xa3,0xe0,0xf5,0x44,0xe4,0xf5,
++0x45,0x12,0x35,0xab,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x01,0x5f,0xe4,0xf0,0x90,0x01,
++0x3c,0x74,0x08,0xf0,0xe4,0x90,0x9e,0x85,0xf0,0x90,0x9e,0x5b,0xe0,0x90,0x9e,0x86,
++0xf0,0xe4,0xfb,0xfd,0x7f,0x5c,0x7e,0x01,0x91,0x5e,0x90,0x01,0x5f,0x74,0x05,0xf0,
++0x90,0x06,0x92,0x74,0x02,0xf0,0x90,0x9e,0x63,0x14,0xf0,0xe5,0x61,0x54,0x0f,0xc3,
++0x94,0x0c,0x50,0x03,0x12,0x54,0xe3,0x22,0x8f,0x82,0x8e,0x83,0xa3,0xa3,0xa3,0xe4,
++0xf0,0x22,0xe4,0xf5,0x65,0x7f,0x60,0x7e,0x01,0x80,0xed,0x7d,0x01,0xaf,0x62,0x02,
++0x54,0xe7,0xb1,0xb0,0xbf,0x01,0x12,0x90,0x9e,0x79,0xe0,0xff,0xe4,0xfd,0xf1,0x79,
++0x12,0x5f,0xf7,0x90,0x04,0x1f,0x74,0x20,0xf0,0x22,0xb1,0xb0,0xbf,0x01,0x0f,0x90,
++0x02,0x09,0xe0,0xff,0x7d,0x01,0xf1,0x79,0x90,0x04,0x1f,0x74,0x20,0xf0,0x22,0x22,
++0x22,0x22,0x00,0x02,0x45,0x03,0x02,0x45,0x06,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,
++0x8b,0x20,0x8a,0x21,0x89,0x22,0x90,0x9e,0x87,0x71,0x8b,0xab,0x23,0xaa,0x24,0xa9,
++0x25,0x90,0x9e,0x8a,0x71,0x8b,0xaf,0x26,0x15,0x26,0xef,0x60,0x1b,0x90,0x9e,0x8a,
++0xe4,0x75,0xf0,0x01,0x71,0x74,0x12,0x29,0xd9,0xff,0x90,0x9e,0x87,0xe4,0x75,0xf0,
++0x01,0x71,0x74,0xef,0x51,0x4d,0x80,0xde,0xab,0x20,0xaa,0x21,0xa9,0x22,0xd0,0xd0,
++0x92,0xaf,0x22,0x90,0x9e,0x11,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0x90,0x06,0xa9,
++0xe0,0x90,0x9e,0x10,0xf0,0xe0,0x54,0xc0,0x70,0x08,0x53,0x64,0xfe,0x53,0x64,0xfd,
++0x91,0xcb,0x90,0x9e,0x10,0xe0,0x30,0xe6,0x13,0x43,0x64,0x01,0x90,0x9e,0x66,0xe0,
++0x64,0x02,0x60,0x04,0x91,0xd2,0x80,0x07,0x91,0x79,0x80,0x03,0x53,0x64,0xfe,0x90,
++0x9e,0x10,0xe0,0x30,0xe7,0x16,0x43,0x64,0x02,0xe4,0x90,0x9e,0x85,0x91,0x4e,0x90,
++0x01,0x57,0x74,0x05,0xf0,0x90,0x9e,0x67,0x74,0x01,0xf0,0x22,0x53,0x64,0xfd,0x22,
++0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x01,0xc4,0x74,0xb0,0xf0,0x74,0x45,0xa3,
++0xf0,0x90,0x04,0x1d,0xe0,0x60,0x1a,0x90,0x05,0x22,0xe0,0x54,0x90,0x60,0x07,0x90,
++0x01,0xc6,0xe0,0x44,0x40,0xf0,0x90,0x01,0xc7,0xe0,0x30,0xe1,0xe4,0x7f,0x00,0x80,
++0x02,0x7f,0x01,0xd0,0xd0,0x92,0xaf,0x22,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0,0x82,
++0xc0,0xd0,0x75,0xd0,0x00,0xc0,0x00,0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,
++0x05,0xc0,0x06,0xc0,0x07,0x75,0x13,0x00,0x90,0x01,0xc4,0x74,0xe8,0xf0,0x74,0x45,
++0xa3,0xf0,0x53,0x91,0xdf,0x90,0x01,0x3c,0xe0,0x55,0x30,0xf5,0x34,0xa3,0xe0,0x55,
++0x31,0xf5,0x35,0xa3,0xe0,0x55,0x32,0xf5,0x36,0xa3,0xe0,0x55,0x33,0xf5,0x37,0xe5,
++0x34,0x30,0xe0,0x06,0x90,0x01,0x3c,0x74,0x01,0xf0,0xe5,0x34,0x30,0xe1,0x09,0x90,
++0x01,0x3c,0x74,0x02,0xf0,0x12,0x61,0xc9,0xe5,0x34,0x30,0xe2,0x38,0x90,0x01,0x3c,
++0x74,0x04,0xf0,0x90,0x06,0x92,0xe0,0x30,0xe0,0x24,0x90,0x9e,0x85,0xe4,0xf0,0x90,
++0x9e,0x5b,0xe0,0x90,0x9e,0x86,0xf0,0xe4,0xfb,0xfd,0x7f,0x58,0x7e,0x01,0x91,0x5e,
++0x90,0x01,0x5b,0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x01,0xf0,0x80,0x07,0x90,0x9e,
++0x64,0xe4,0xf0,0x91,0xcb,0xe5,0x34,0x30,0xe3,0x38,0x90,0x01,0x3c,0x74,0x08,0xf0,
++0x90,0x06,0x92,0xe0,0x30,0xe1,0x24,0x90,0x9e,0x85,0xe4,0xf0,0x90,0x9e,0x5b,0xe0,
++0x90,0x9e,0x86,0xf0,0xe4,0xfb,0xfd,0x7f,0x5c,0x7e,0x01,0x91,0x5e,0x90,0x01,0x5f,
++0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x02,0xf0,0x80,0x07,0x90,0x9e,0x63,0xe4,0xf0,
++0x91,0xcb,0xe5,0x34,0x30,0xe4,0x09,0x90,0x01,0x3c,0x74,0x10,0xf0,0x12,0x4b,0xfb,
++0xe5,0x34,0x30,0xe5,0x09,0x90,0x01,0x3c,0x74,0x20,0xf0,0x12,0x4c,0x3d,0xe5,0x35,
++0x30,0xe0,0x44,0x90,0x01,0x3d,0x74,0x01,0xf0,0x90,0x01,0x2f,0xe0,0x44,0x7f,0xf0,
++0x90,0x00,0x83,0xe0,0x54,0x0f,0xf5,0x13,0xb4,0x01,0x02,0x80,0x1c,0xe5,0x13,0xb4,
++0x02,0x05,0x90,0x00,0x83,0x80,0x12,0xe5,0x13,0xb4,0x04,0x05,0x90,0x00,0x83,0x80,
++0x08,0xe5,0x13,0xb4,0x0c,0x06,0x90,0x00,0x83,0xe0,0xf5,0x62,0x90,0x01,0xbb,0xe5,
++0x62,0xf0,0x12,0x60,0xc0,0x91,0xcb,0xe5,0x35,0x30,0xe2,0x06,0x90,0x01,0x3d,0x74,
++0x04,0xf0,0xe5,0x35,0x30,0xe4,0x06,0x90,0x01,0x3d,0x74,0x10,0xf0,0xe5,0x36,0x30,
++0xe0,0x06,0x90,0x01,0x3e,0x74,0x01,0xf0,0xe5,0x36,0x30,0xe1,0x06,0x90,0x01,0x3e,
++0x74,0x02,0xf0,0x74,0xe8,0x04,0x90,0x01,0xc4,0xf0,0x74,0x45,0xa3,0xf0,0xd0,0x07,
++0xd0,0x06,0xd0,0x05,0xd0,0x04,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,
++0xd0,0x82,0xd0,0x83,0xd0,0xf0,0xd0,0xe0,0x32,0x90,0x9e,0x98,0xef,0xf0,0xa3,0xed,
++0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xe5,0x63,0x60,0x05,0xe4,0xff,0x12,0x54,0x97,0x90,
++0x9e,0x98,0xe0,0x30,0xe0,0x09,0x90,0x9e,0x9a,0xe4,0xf0,0xa3,0x74,0x80,0xf0,0x90,
++0x9e,0x98,0xe0,0xff,0xc3,0x13,0x90,0xfd,0x10,0xf0,0x90,0x04,0x25,0xef,0xf0,0x90,
++0x9e,0x99,0xe0,0x60,0x1f,0xa3,0xa3,0xe0,0xff,0x24,0x0f,0xf5,0x82,0xe4,0x34,0xfc,
++0xf5,0x83,0xe0,0x44,0x80,0xf0,0x74,0x10,0x2f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,
++0xe0,0x44,0x80,0xf0,0x90,0x9e,0x9a,0xa3,0xe0,0xff,0xfd,0x24,0x08,0xf5,0x82,0xe4,
++0x34,0xfc,0xf5,0x83,0xe4,0xf0,0x74,0x09,0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,
++0xe0,0x54,0xf0,0xf0,0x74,0x21,0x2f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,
++0xf7,0xf0,0x90,0x9e,0x9a,0xe0,0xfe,0xa3,0xe0,0xff,0x22,0x75,0x28,0x33,0xe4,0xf5,
++0x29,0x75,0x2a,0x07,0xf5,0x2b,0x90,0x01,0x30,0xe5,0x28,0xf0,0xa3,0xe5,0x29,0xf0,
++0xa3,0xe5,0x2a,0xf0,0xa3,0xe5,0x2b,0xf0,0x22,0xe4,0x90,0x9e,0x16,0xf0,0xa3,0xf0,
++0x75,0x8e,0x02,0xf1,0xa1,0xf1,0xe9,0x90,0x9e,0x7e,0xef,0xf0,0xf1,0xdd,0x90,0x9e,
++0x80,0xef,0xf0,0xf1,0xf6,0x90,0x9e,0x75,0xee,0xf0,0xa3,0xef,0xf0,0xe4,0xf5,0x57,
++0x12,0x6e,0x77,0xf1,0xd4,0x12,0x60,0x4b,0x12,0x32,0x3d,0xf1,0xc9,0x11,0x0b,0x12,
++0x50,0x0e,0xf1,0xcd,0xf1,0xb1,0x12,0x44,0xff,0xf1,0x45,0x90,0x9e,0x18,0xe5,0xd9,
++0xf0,0x11,0xd0,0xc2,0xaf,0x90,0x00,0x80,0xe0,0x44,0x40,0xf0,0xb1,0x45,0x75,0xe8,
++0x03,0x43,0xa8,0x85,0xd2,0xaf,0x90,0x9e,0x16,0xe0,0x64,0x01,0xf0,0x24,0x29,0x90,
++0x01,0xc4,0xf0,0x74,0x48,0xa3,0xf0,0xe5,0x57,0x30,0xe4,0x0a,0xc2,0xaf,0x53,0x57,
++0xef,0xd2,0xaf,0x12,0x58,0x74,0xe5,0x57,0x30,0xe6,0x17,0xc2,0xaf,0x53,0x57,0xbf,
++0xd2,0xaf,0x12,0x67,0xa1,0x90,0x9e,0x43,0xe0,0xff,0x60,0x03,0xb4,0x01,0x03,0x12,
++0x7b,0x49,0x90,0x9e,0x43,0xe0,0x70,0x03,0x12,0x7c,0x4c,0x12,0x73,0x85,0x80,0xb6,
++0x90,0x01,0x3c,0x74,0xff,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x01,0x34,0xf0,0xa3,0xf0,
++0xa3,0xf0,0xa3,0xf0,0xfd,0x7f,0x54,0x31,0x05,0x7d,0xff,0x7f,0x55,0x31,0x05,0x7d,
++0xff,0x7f,0x56,0x31,0x05,0x7d,0xff,0x7f,0x57,0x80,0x0a,0xf0,0x90,0x00,0x45,0xe0,
++0x54,0xfe,0xfd,0x7f,0x45,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x8f,0x82,0x75,0x83,
++0x00,0xed,0xf0,0xb1,0x45,0xd0,0xd0,0x92,0xaf,0x22,0xef,0x14,0x60,0x30,0x14,0x60,
++0x66,0x24,0x02,0x60,0x02,0x21,0xc1,0x90,0x9e,0x3f,0x74,0x02,0xf0,0x90,0x00,0x48,
++0xe0,0x44,0x0c,0xfd,0x7f,0x48,0x31,0x05,0x90,0x00,0x47,0xe0,0x44,0x08,0xfd,0x7f,
++0x47,0x31,0x05,0x90,0x00,0x45,0xe0,0x44,0x10,0xfd,0x7f,0x45,0x80,0x71,0xe4,0x90,
++0x9e,0x3f,0xf0,0x90,0x9e,0x3b,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,
++0x80,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x00,0x45,0xe0,0x44,0xef,0xfd,0x7f,0x45,0x31,
++0x05,0x90,0x00,0x45,0xe0,0x54,0xef,0xfd,0x7f,0x45,0x31,0x05,0x90,0x00,0x46,0xe0,
++0x44,0x10,0xfd,0x7f,0x46,0x80,0x38,0x90,0x9e,0x3f,0x74,0x01,0xf0,0x90,0x9e,0x45,
++0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9,
++0x90,0x00,0x45,0xe0,0x44,0x20,0xfd,0x7f,0x45,0x31,0x05,0x90,0x00,0x45,0xe0,0x44,
++0x10,0xfd,0x7f,0x45,0x31,0x05,0x90,0x00,0x46,0xe0,0x44,0x10,0xfd,0x7f,0x46,0x31,
++0x05,0x22,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x9e,0x41,0xf0,0x90,0x00,0x01,0x12,
++0x42,0x20,0x25,0xe0,0x25,0xe0,0x90,0x9e,0x40,0xf0,0x12,0x29,0xd9,0x25,0xe0,0x25,
++0xe0,0x90,0x9e,0x44,0xf0,0x90,0x05,0x60,0xe0,0x90,0x9e,0x4f,0xf0,0x90,0x05,0x61,
++0xe0,0x90,0x9e,0x50,0xf0,0x90,0x05,0x62,0xe0,0x90,0x9e,0x51,0xf0,0x90,0x05,0x63,
++0xe0,0x90,0x9e,0x52,0xf0,0xa2,0xaf,0xe4,0x33,0x90,0x9e,0x24,0xf0,0xc2,0xaf,0x90,
++0x9e,0x40,0xe0,0xff,0x91,0xf0,0x90,0x9e,0x24,0xe0,0x24,0xff,0x92,0xaf,0x90,0x9e,
++0x41,0xe0,0x70,0x02,0x41,0xc8,0x90,0x9e,0x40,0xe0,0x70,0x02,0x41,0xc8,0x90,0x9e,
++0x44,0xe0,0x70,0x02,0x41,0xc8,0xa2,0xaf,0xe4,0x33,0x90,0x9e,0x24,0xf0,0xc2,0xaf,
++0x90,0x9e,0x53,0x74,0x01,0xf0,0x90,0x9e,0x24,0xe0,0x24,0xff,0x92,0xaf,0x11,0xfc,
++0x90,0x00,0x46,0xe0,0x44,0x01,0xfd,0x7f,0x46,0x31,0x05,0x90,0x9e,0x39,0xe0,0x60,
++0x15,0x90,0x9e,0x45,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,
++0x08,0x12,0x2f,0xd9,0x80,0x06,0x90,0x05,0x22,0x74,0x7f,0xf0,0x90,0x00,0x45,0xe0,
++0x54,0xef,0xfd,0x7f,0x45,0x31,0x05,0x90,0x05,0x87,0xe0,0x64,0x80,0xf0,0x90,0x9e,
++0x4f,0xe0,0x90,0x05,0x84,0xf0,0x90,0x9e,0x50,0xe0,0x90,0x05,0x85,0xf0,0x90,0x9e,
++0x51,0xe0,0x90,0x05,0x86,0xf0,0x90,0x9e,0x52,0xe0,0x90,0x05,0x87,0xf0,0xa2,0xaf,
++0xe4,0x33,0x90,0x9e,0x24,0xf0,0xc2,0xaf,0x90,0x01,0x3c,0xe0,0x44,0x20,0xf0,0x7d,
++0x20,0xe4,0xff,0x12,0x37,0x00,0x80,0x2b,0x90,0x9e,0x41,0xe0,0x70,0x2d,0x90,0x9e,
++0x53,0x11,0xfb,0x90,0x00,0x46,0xe0,0x54,0xfe,0xfd,0x7f,0x46,0x31,0x05,0x90,0x05,
++0x22,0xe4,0xf0,0xa2,0xaf,0x33,0x90,0x9e,0x24,0xf0,0xc2,0xaf,0x7d,0x20,0xe4,0xff,
++0x12,0x36,0x92,0x90,0x9e,0x24,0xe0,0x24,0xff,0x92,0xaf,0x22,0x8b,0x14,0x8a,0x15,
++0x89,0x16,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x9e,0x42,0xf0,0xe0,0x30,0xe0,0x4b,
++0x90,0x9e,0x39,0x74,0x01,0xf0,0x7f,0x80,0x7e,0x08,0x12,0x27,0xde,0x90,0x9e,0x3b,
++0x12,0x2a,0x7f,0xab,0x14,0xaa,0x15,0xa9,0x16,0x90,0x00,0x01,0x12,0x42,0x20,0xff,
++0xe4,0xfc,0xfd,0xfe,0x78,0x1a,0x12,0x2a,0x6c,0xa8,0x04,0xa9,0x05,0xaa,0x06,0xab,
++0x07,0x90,0x9e,0x3b,0x12,0x43,0x53,0xec,0x54,0x03,0xfc,0x12,0x43,0x46,0x90,0x9e,
++0x45,0x12,0x2a,0x7f,0x90,0x05,0x22,0xe4,0xf0,0x80,0x2d,0xe4,0x90,0x9e,0x39,0xf0,
++0x7f,0x80,0x7e,0x08,0x12,0x27,0xde,0xec,0x54,0x03,0xfc,0xec,0x44,0xc0,0xfc,0x90,
++0x9e,0x3b,0x12,0x2a,0x7f,0x90,0x9e,0x3b,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,
++0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x9e,0x42,0xe0,0x30,0xe1,0x19,0x7d,
++0x0c,0x7f,0x47,0x31,0x05,0x90,0x00,0x48,0xe0,0x44,0x0c,0xfd,0x7f,0x48,0x31,0x05,
++0x90,0x00,0x46,0xe0,0x44,0x10,0x80,0x1c,0x90,0x00,0x47,0xe0,0x54,0xf3,0xfd,0x7f,
++0x47,0x31,0x05,0x90,0x00,0x48,0xe0,0x54,0xf3,0xfd,0x7f,0x48,0x31,0x05,0x90,0x00,
++0x46,0xe0,0x54,0xef,0xfd,0x7f,0x46,0x31,0x05,0xe4,0x90,0x9e,0x3f,0xf0,0x22,0x90,
++0x01,0x30,0xe4,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x01,0x38,0xf0,0xa3,0xf0,
++0xa3,0xf0,0xa3,0xf0,0xfd,0x7f,0x50,0x31,0x05,0xe4,0xfd,0x7f,0x51,0x31,0x05,0xe4,
++0xfd,0x7f,0x52,0x31,0x05,0xe4,0xfd,0x7f,0x53,0x21,0x05,0xe5,0x65,0x64,0x01,0x70,
++0x3b,0xd1,0x85,0xbf,0x01,0x04,0x7f,0x01,0xd1,0x79,0x90,0x00,0x46,0xe0,0x44,0x04,
++0xfd,0x7f,0x46,0x31,0x05,0x90,0x00,0x44,0xe0,0x54,0xfb,0xfd,0x7f,0x44,0x31,0x05,
++0x90,0x00,0x46,0xe0,0x54,0xfb,0xfd,0x7f,0x46,0x31,0x05,0x7f,0x02,0xd1,0xa1,0x8f,
++0x69,0x90,0x01,0xc9,0xe5,0x69,0xf0,0xb4,0x01,0x02,0xd1,0x19,0x22,0x90,0x9e,0x41,
++0xe0,0x64,0x01,0x60,0x02,0x81,0xef,0x90,0x00,0x46,0xe0,0x44,0x01,0xfd,0x7f,0x46,
++0x31,0x05,0x90,0x9e,0x53,0xe0,0x70,0x31,0x90,0x9e,0x39,0xe0,0x60,0x15,0x90,0x9e,
++0x45,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,
++0xd9,0x80,0x06,0x90,0x05,0x22,0x74,0x7f,0xf0,0x90,0x9e,0x40,0xe0,0xff,0x91,0xf0,
++0x90,0x9e,0x53,0x74,0x01,0x11,0xfb,0x80,0x3f,0x90,0x9e,0x53,0xe0,0x64,0x01,0x70,
++0x37,0x90,0x9e,0x44,0xe0,0xff,0x91,0xf0,0xe4,0x90,0x9e,0x53,0xf0,0x90,0x00,0x45,
++0xe0,0x44,0x01,0xfd,0x7f,0x45,0x31,0x05,0x90,0x9e,0x39,0xe0,0x60,0x15,0x90,0x9e,
++0x3b,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,
++0xd9,0x80,0x05,0x90,0x05,0x22,0xe4,0xf0,0x90,0x05,0x87,0xe0,0x64,0x80,0xf0,0x90,
++0x9e,0x4f,0xe0,0x90,0x05,0x84,0xf0,0x90,0x9e,0x50,0xe0,0x90,0x05,0x85,0xf0,0x90,
++0x9e,0x51,0xe0,0x90,0x05,0x86,0xf0,0x90,0x9e,0x52,0xe0,0x90,0x05,0x87,0xf0,0x22,
++0x90,0x05,0x60,0xe0,0x90,0x9e,0x4f,0xf0,0x90,0x05,0x61,0xe0,0x90,0x9e,0x50,0xf0,
++0x90,0x05,0x62,0xe0,0x90,0x9e,0x51,0xf0,0x90,0x05,0x63,0xe0,0x90,0x9e,0x52,0xf0,
++0xc3,0x74,0xff,0x9f,0xfe,0x90,0x9e,0x50,0xe0,0xd3,0x9e,0x40,0x1e,0xe0,0x2f,0xf0,
++0xa3,0xe0,0xb4,0xff,0x0f,0xe4,0xf0,0xa3,0xe0,0xb4,0xff,0x03,0xe4,0xf0,0x22,0x90,
++0x9e,0x52,0x80,0x03,0x90,0x9e,0x51,0xe0,0x04,0xf0,0x22,0x90,0x9e,0x50,0xe0,0x2f,
++0xf0,0x22,0xe0,0x5f,0xf0,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x7f,0x10,0xdf,0xfe,
++0xd0,0xd0,0x92,0xaf,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x2a,0xed,
++0xf0,0x90,0x9e,0x29,0xef,0xf0,0xd3,0x94,0x07,0x50,0x4e,0xa3,0xe0,0x70,0x1a,0x90,
++0x9e,0x29,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,
++0xff,0x90,0x00,0x47,0xe0,0x5f,0xf0,0x80,0x17,0x90,0x9e,0x29,0xe0,0xff,0x74,0x01,
++0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xff,0x90,0x00,0x47,0xe0,0x4f,0xf0,
++0xb1,0x45,0x90,0x9e,0x29,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,
++0xd8,0xfc,0xf4,0xff,0x90,0x00,0x46,0x80,0x59,0x90,0x9e,0x29,0xe0,0x24,0xf8,0xf0,
++0xa3,0xe0,0x70,0x1d,0x90,0x9e,0x29,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,
++0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0,0xf4,0xff,0x90,0x00,0x43,0xe0,0x5f,0xf0,0x80,
++0x1a,0x90,0x9e,0x29,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,
++0xfc,0xc4,0x54,0xf0,0xff,0x90,0x00,0x43,0xe0,0x4f,0xf0,0xb1,0x45,0x90,0x9e,0x29,
++0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,
++0x00,0x43,0xb1,0x42,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x00,0x49,0xe0,0x90,0x9e,0xb1,
++0xf0,0xe0,0x54,0x0f,0xf0,0x44,0xf0,0xfd,0x7f,0x49,0x31,0x05,0x90,0x9e,0xb1,0xe0,
++0x44,0xb0,0xfd,0x7f,0x49,0x21,0x05,0x90,0x9e,0x27,0xee,0xf0,0xa3,0xef,0xf0,0x75,
++0x65,0x01,0x8e,0x66,0xf5,0x67,0xe4,0xfd,0x7f,0x0b,0xb1,0x55,0xe4,0xfd,0x7f,0x02,
++0xb1,0x55,0xd1,0x85,0xe4,0xff,0xd1,0x79,0xe4,0xf5,0x69,0x90,0x01,0xc9,0xe5,0x69,
++0xf0,0x90,0x9e,0x27,0xe0,0xfc,0xa3,0xe0,0xfd,0xec,0xfb,0x8d,0x44,0xe4,0xf5,0x45,
++0x7d,0x01,0x7f,0x60,0x7e,0x01,0x02,0x35,0xab,0x90,0x01,0xca,0xe5,0x68,0xf0,0xef,
++0x60,0x02,0xd1,0x19,0x22,0x7f,0x0b,0xd1,0xa1,0xef,0x65,0x68,0x60,0x10,0xe5,0x68,
++0xb4,0x01,0x05,0xe4,0xf5,0x68,0x80,0x03,0x75,0x68,0x01,0x7f,0x01,0x22,0x7f,0x00,
++0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0xb2,0xef,0xf0,0xd3,0x94,0x07,
++0x50,0x43,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,
++0xff,0x90,0x00,0x46,0xb1,0x42,0x90,0x9e,0xb2,0xe0,0xfd,0x74,0x01,0x7e,0x00,0xa8,
++0x05,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x00,0x44,0xe0,
++0xfb,0xe4,0xfe,0xef,0x5b,0xa8,0x05,0x08,0x80,0x06,0xce,0xa2,0xe7,0x13,0xce,0x13,
++0xd8,0xf8,0xff,0x80,0x4b,0x90,0x9e,0xb2,0xe0,0x24,0xf8,0xf0,0xe0,0xff,0x74,0x01,
++0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x43,0xe0,0x5f,
++0xf0,0xb1,0x45,0x90,0x9e,0xb2,0xe0,0xfd,0x74,0x01,0x7e,0x00,0xa8,0x05,0x08,0x80,
++0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x00,0x42,0xe0,0xfb,0xe4,0xfe,
++0xef,0x5b,0xa8,0x05,0x08,0x80,0x06,0xce,0xa2,0xe7,0x13,0xce,0x13,0xd8,0xf8,0xff,
++0xd0,0xd0,0x92,0xaf,0x22,0xe4,0xfd,0x7f,0x45,0x31,0x05,0x90,0x04,0xfd,0xe4,0xf0,
++0xa3,0xf0,0x90,0x9e,0x43,0xf0,0x90,0x9e,0x49,0xf0,0x90,0x9e,0x4c,0xf0,0x90,0x9e,
++0x4a,0xf0,0x90,0x9e,0x4d,0xf0,0x90,0x9e,0x4b,0xf0,0x90,0x9e,0x4e,0xf0,0x90,0x9e,
++0x35,0x04,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x9e,0x3a,0xf0,0x90,0x9e,
++0x3f,0xf0,0x90,0x9e,0x41,0xf0,0x90,0x9e,0x53,0xf0,0x90,0x9e,0x44,0xf0,0x90,0x9e,
++0x40,0xf0,0x90,0x9e,0x39,0xf0,0x90,0x00,0x51,0xe0,0x44,0xc0,0xfd,0x7f,0x51,0x21,
++0x05,0xe4,0x90,0x9e,0x7d,0xf0,0x90,0x00,0x80,0xe0,0x44,0x80,0xfd,0x7f,0x80,0x21,
++0x05,0x75,0x30,0x1f,0x75,0x31,0x01,0xe4,0xf5,0x32,0x90,0x01,0x38,0xe5,0x30,0xf0,
++0xa3,0xe5,0x31,0xf0,0xa3,0xe5,0x32,0xf0,0x22,0xe4,0xf5,0x68,0x22,0x90,0x01,0x64,
++0x74,0xa0,0xf0,0x22,0x90,0x9e,0x80,0xe0,0x90,0x9e,0x0f,0xf0,0x22,0x90,0x00,0xf3,
++0xe0,0x7f,0x00,0x30,0xe3,0x02,0x7f,0x01,0x22,0x90,0x00,0x02,0xe0,0x54,0xe0,0x7f,
++0x01,0x60,0x02,0x7f,0x00,0x22,0x90,0x9e,0x80,0xe0,0xb4,0x01,0x0c,0x90,0x00,0xf2,
++0xe0,0x30,0xe7,0x05,0x7e,0xfd,0x7f,0x33,0x22,0x7e,0xfd,0x7f,0x2f,0x22,0x90,0x00,
++0xf3,0xe0,0x30,0xe2,0x0d,0x90,0x05,0x41,0x74,0x10,0xf0,0x90,0x05,0x5a,0xf0,0xa3,
++0xe4,0xf0,0x22,0x90,0x01,0x02,0xe0,0x54,0x03,0xff,0xe0,0x54,0x0c,0x13,0x13,0x54,
++0x3f,0xfe,0xef,0x64,0x01,0x60,0x04,0xef,0xb4,0x03,0x10,0x90,0x9e,0x10,0x74,0x01,
++0xf0,0xa3,0x74,0x37,0xf0,0xa3,0x74,0x01,0xf0,0x80,0x1a,0xee,0x64,0x01,0x60,0x07,
++0xaf,0x06,0xee,0x64,0x03,0x70,0x49,0x90,0x9e,0x10,0x74,0x01,0xf0,0xa3,0x74,0x3d,
++0xf0,0xa3,0x74,0x40,0xf0,0x90,0x9e,0x10,0xe0,0xfe,0xa3,0xe0,0xff,0xf5,0x82,0x8e,
++0x83,0xe0,0xfd,0x90,0x9e,0x12,0xe0,0xfc,0xed,0x5c,0x60,0x0c,0x8f,0x82,0x8e,0x83,
++0xec,0xf0,0xe4,0x90,0x9e,0x77,0xf0,0x22,0x90,0x9e,0x77,0xe0,0x04,0xf0,0xe0,0xc3,
++0x94,0x0a,0x40,0x0c,0xe4,0xf0,0x90,0x04,0x19,0xe0,0x30,0xe0,0x03,0x12,0x44,0xea,
++0x22,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0,0x82,0xc0,0xd0,0x75,0xd0,0x00,0xc0,0x00,
++0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0x90,0x01,
++0xc4,0x74,0xa1,0xf0,0x74,0x50,0xa3,0xf0,0x90,0x01,0x34,0xe0,0x55,0x28,0xf5,0x2c,
++0xa3,0xe0,0x55,0x29,0xf5,0x2d,0xa3,0xe0,0x55,0x2a,0xf5,0x2e,0xa3,0xe0,0x55,0x2b,
++0xf5,0x2f,0xe5,0x2c,0x20,0xe0,0x02,0x41,0x46,0x90,0x01,0x34,0x74,0x01,0xf0,0x85,
++0xd1,0x4d,0x85,0xd2,0x4e,0x85,0xd3,0x4f,0x85,0xd4,0x50,0x85,0xd5,0x51,0x85,0xd6,
++0x52,0x85,0xd7,0x53,0x85,0xd9,0x54,0xe5,0x54,0x54,0x40,0xc3,0x13,0xff,0xe5,0x53,
++0x54,0x20,0x6f,0x70,0x02,0x21,0xf5,0xe5,0x54,0x30,0xe5,0x02,0x21,0xf5,0xe5,0x52,
++0x54,0x3f,0xf5,0x08,0xe5,0x4d,0x54,0x3f,0xf5,0x09,0xe5,0x51,0x54,0x1f,0xff,0xe5,
++0x08,0x25,0xe0,0x24,0xc4,0xf5,0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0x8f,0xf0,0x12,
++0x42,0x81,0xe5,0x53,0x54,0x1f,0xff,0xe5,0x08,0x25,0xe0,0x24,0x80,0xf5,0x82,0xe4,
++0x34,0x93,0xf5,0x83,0xe4,0x8f,0xf0,0x12,0x42,0x81,0xe5,0x09,0xd3,0x94,0x04,0x40,
++0x03,0x75,0x09,0x04,0x75,0xf0,0x0a,0xe5,0x08,0x90,0x90,0x00,0x12,0x43,0x5f,0x75,
++0xf0,0x02,0xe5,0x09,0x12,0x43,0x5f,0xe0,0xfe,0xa3,0xe0,0xff,0xe5,0x53,0x54,0x1f,
++0x2f,0xff,0xe4,0x3e,0xfe,0x75,0xf0,0x0a,0xe5,0x08,0x90,0x90,0x00,0x12,0x43,0x5f,
++0x75,0xf0,0x02,0xe5,0x09,0x12,0x43,0x5f,0xee,0xf0,0xa3,0xef,0xf0,0xe5,0x54,0x20,
++0xe6,0x24,0xe5,0x53,0x54,0x1f,0xff,0xe5,0x08,0x25,0xe0,0x24,0xc4,0xf5,0x82,0xe4,
++0x34,0x98,0xf5,0x83,0xe4,0x8f,0xf0,0x12,0x42,0x81,0xe5,0x4f,0x30,0xe7,0x36,0xaf,
++0x08,0x12,0x63,0x51,0x80,0x2f,0xe5,0x53,0x54,0x1f,0xff,0xe5,0x08,0x25,0xe0,0x24,
++0x44,0xf5,0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0x8f,0xf0,0x12,0x42,0x81,0xe5,0x4f,
++0x30,0xe7,0x12,0xe5,0x4f,0x54,0x7f,0xfd,0xe5,0x53,0x54,0x1f,0xf5,0x0d,0xab,0x09,
++0xaf,0x08,0x12,0x62,0xee,0xe5,0x63,0x14,0x24,0xfd,0x50,0x02,0x80,0x48,0x90,0x9e,
++0x66,0xe0,0x60,0x3a,0x90,0x01,0x5b,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x04,0xf0,0x71,
++0xc3,0xef,0x64,0x01,0x70,0x30,0x90,0x9e,0x85,0xf0,0x90,0x9e,0x5b,0xe0,0x90,0x9e,
++0x86,0xf0,0xe4,0xfb,0xfd,0x7f,0x58,0x7e,0x01,0x12,0x44,0x5e,0x90,0x01,0x5b,0x74,
++0x05,0xf0,0x90,0x06,0x92,0x74,0x01,0xf0,0x90,0x9e,0x64,0xf0,0x80,0x08,0x71,0xc3,
++0xbf,0x01,0x03,0x12,0x44,0xcb,0xe5,0x2c,0x30,0xe1,0x20,0x90,0x01,0x34,0x74,0x02,
++0xf0,0x85,0xd1,0x58,0x85,0xd2,0x59,0x85,0xd3,0x5a,0x85,0xd4,0x5b,0x85,0xd5,0x5c,
++0x85,0xd6,0x5d,0x85,0xd7,0x5e,0x85,0xd9,0x5f,0x71,0xd2,0xe5,0x2c,0x30,0xe3,0x06,
++0x90,0x01,0x34,0x74,0x08,0xf0,0xe5,0x2c,0x30,0xe4,0x09,0x90,0x01,0x34,0x74,0x10,
++0xf0,0x43,0x57,0x10,0xe5,0x2c,0x30,0xe5,0x26,0x90,0x01,0xcf,0xe0,0x30,0xe5,0x1f,
++0xe0,0x54,0xdf,0xf0,0x90,0x01,0x34,0x74,0x20,0xf0,0x75,0xa8,0x00,0x75,0xe8,0x00,
++0x12,0x4b,0xcf,0x90,0x00,0x03,0xe0,0x54,0xfb,0xf0,0x12,0x4d,0x45,0x80,0xfe,0xe5,
++0x2c,0x30,0xe6,0x06,0x90,0x01,0x34,0x74,0x40,0xf0,0xe5,0x2e,0x30,0xe0,0x12,0x90,
++0x9e,0x7f,0x74,0x01,0xf0,0x90,0x01,0x36,0xf0,0x12,0x61,0x4e,0x90,0x9e,0x7f,0xe4,
++0xf0,0xe5,0x2e,0x30,0xe1,0x0b,0x90,0x01,0x36,0x74,0x02,0xf0,0x43,0x57,0x40,0x11,
++0x23,0xe5,0x2e,0x30,0xe2,0x09,0x90,0x01,0x36,0x74,0x04,0xf0,0x12,0x60,0xdf,0xe5,
++0x2e,0x30,0xe3,0x28,0x90,0x01,0x36,0x74,0x08,0xf0,0xe5,0x60,0x64,0x01,0x70,0x1c,
++0xe5,0x63,0x60,0x18,0x90,0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x90,
++0x9e,0x85,0xe4,0x12,0x44,0x4e,0x90,0x01,0x57,0x74,0x05,0xf0,0xe5,0x2e,0x30,0xe4,
++0x2b,0x90,0x01,0x36,0x74,0x10,0xf0,0xe5,0x60,0xb4,0x01,0x20,0xe5,0x63,0x60,0x1c,
++0x90,0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x90,0x9e,0x67,0xe4,0xf0,
++0x53,0x64,0xfd,0xe5,0x64,0x54,0x07,0x70,0x03,0x12,0x44,0xcb,0xe5,0x2e,0x30,0xe5,
++0x1f,0x90,0x01,0x36,0x74,0x20,0xf0,0xe5,0x60,0xb4,0x01,0x14,0xe5,0x63,0x60,0x10,
++0x90,0x9e,0x66,0xe0,0x64,0x02,0x60,0x05,0x12,0x44,0xd2,0x80,0x03,0x12,0x44,0x79,
++0xe5,0x2e,0x30,0xe6,0x1b,0x90,0x01,0x36,0x74,0x40,0xf0,0xe5,0x60,0xb4,0x01,0x10,
++0xe5,0x63,0x60,0x0c,0x53,0x64,0xfe,0xe5,0x64,0x54,0x07,0x70,0x03,0x12,0x44,0xcb,
++0xe5,0x2f,0x30,0xe1,0x08,0x90,0x01,0x37,0x74,0x02,0xf0,0x91,0x64,0x74,0xa1,0x04,
++0x90,0x01,0xc4,0xf0,0x74,0x50,0xa3,0xf0,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04,
++0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,0xd0,0x82,0xd0,0x83,0xd0,0xf0,
++0xd0,0xe0,0x32,0x90,0x04,0x1b,0xe0,0x54,0x7f,0x64,0x7f,0x7f,0x01,0x60,0x02,0x7f,
++0x00,0x22,0x90,0x9e,0x10,0xe0,0x54,0xf0,0x44,0x03,0xf0,0x54,0x0f,0x44,0x80,0xf0,
++0x7b,0x00,0x7a,0x00,0x79,0x58,0x90,0x9e,0x90,0x12,0x43,0x8b,0x0b,0x7a,0x9e,0x79,
++0x10,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x8d,0x12,0x43,0x8b,0x90,0x9e,
++0xb0,0xe0,0xff,0x04,0xf0,0x90,0x00,0x01,0xef,0x12,0x42,0x5f,0x7f,0xaf,0x7e,0x01,
++0x12,0x71,0x7a,0xef,0x60,0x49,0x90,0x9e,0x8d,0x12,0x43,0x6b,0x8b,0x23,0x8a,0x24,
++0x89,0x25,0x75,0x26,0x02,0x7b,0x01,0x7a,0x01,0x79,0xa0,0x12,0x45,0x09,0x90,0x9e,
++0x90,0x12,0x43,0x6b,0x8b,0x23,0x8a,0x24,0x89,0x25,0x90,0x9e,0x8d,0x12,0x43,0x6b,
++0x12,0x29,0xd9,0xff,0xc4,0x54,0x0f,0xf5,0x26,0x7b,0x01,0x7a,0x01,0x79,0xa2,0x12,
++0x45,0x09,0x90,0x01,0xaf,0x74,0xff,0xf0,0x90,0x01,0xcb,0xe0,0x64,0x80,0xf0,0xd0,
++0xd0,0x92,0xaf,0x22,0x90,0x9e,0xa0,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe5,0x63,
++0x14,0x24,0xfd,0x50,0x02,0x80,0x1f,0x90,0x9e,0x66,0xe0,0x60,0x06,0x7d,0x01,0x7f,
++0x0c,0x80,0x0d,0xe5,0x61,0x54,0x0f,0xc3,0x94,0x04,0x50,0x06,0x7d,0x01,0x7f,0x04,
++0x91,0xe7,0xe4,0xff,0x91,0x97,0x22,0xef,0x60,0x0b,0x90,0x9e,0x80,0xe0,0xb4,0x01,
++0x10,0xe4,0xff,0x80,0x09,0x90,0x9e,0x80,0xe0,0xb4,0x01,0x05,0x7f,0x01,0x12,0x75,
++0x92,0x22,0x90,0x01,0x37,0x74,0x02,0xf0,0x90,0x05,0x22,0x74,0xff,0xf0,0x12,0x74,
++0x12,0xef,0x70,0x06,0x90,0x01,0xc8,0x74,0xfd,0xf0,0x7d,0x02,0x7f,0x03,0x12,0x36,
++0xe6,0xe5,0x63,0x60,0x04,0x7f,0x01,0x91,0x97,0x12,0x74,0xc8,0x53,0x61,0xf0,0x43,
++0x61,0x02,0x22,0x7d,0x01,0x7f,0x0c,0x8f,0x6a,0x8d,0x6b,0xe5,0x6a,0x54,0x0f,0xff,
++0xe5,0x61,0x54,0x0f,0x6f,0x60,0x65,0xe5,0x6a,0x30,0xe2,0x28,0xe5,0x61,0x20,0xe2,
++0x04,0x7f,0x01,0xd1,0xc2,0xe5,0x61,0x30,0xe3,0x0c,0xe5,0x6a,0x20,0xe3,0x07,0xb1,
++0x5d,0xef,0x60,0x48,0xa1,0xa5,0xe5,0x61,0x20,0xe3,0x41,0xe5,0x6a,0x30,0xe3,0x3c,
++0xaf,0x6b,0xc1,0xdc,0xe5,0x61,0x54,0x0f,0xff,0xbf,0x0c,0x0c,0xe5,0x6a,0x20,0xe3,
++0x07,0xb1,0x5d,0xef,0x60,0x26,0xb1,0xa5,0xe5,0x61,0x54,0x0f,0xff,0xbf,0x04,0x0c,
++0xe5,0x6a,0x20,0xe2,0x07,0xf1,0x21,0xef,0x60,0x12,0x91,0xb2,0xe5,0x61,0x54,0x0f,
++0xff,0xbf,0x02,0x08,0x12,0x60,0xbd,0xef,0x60,0x02,0xd1,0xaf,0x22,0x71,0xc3,0xef,
++0x64,0x01,0x60,0x08,0x90,0x01,0xb9,0x74,0x01,0xf0,0x80,0x30,0x90,0x9e,0x64,0xe0,
++0x60,0x08,0x90,0x01,0xb9,0x74,0x02,0xf0,0x80,0x22,0x90,0x9e,0x63,0xe0,0x60,0x08,
++0x90,0x01,0xb9,0x74,0x04,0xf0,0x80,0x14,0xe5,0x62,0x54,0x0f,0xd3,0x94,0x04,0x40,
++0x08,0x90,0x01,0xb9,0x74,0x08,0xf0,0x80,0x03,0x7f,0x01,0x22,0x90,0x01,0xb8,0x74,
++0x08,0xf0,0x7f,0x00,0x22,0x90,0x06,0x04,0xe0,0x44,0x40,0xf0,0xe5,0x60,0xb4,0x01,
++0x04,0x7f,0x01,0xd1,0xf6,0x53,0x61,0xf0,0x43,0x61,0x04,0x22,0xef,0x64,0x01,0x70,
++0x2e,0x7d,0x78,0x7f,0x02,0x12,0x36,0x75,0x7d,0x02,0x7f,0x03,0x12,0x36,0x75,0x90,
++0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x91,0xe3,0xe4,0xff,0x91,0x97,
++0x90,0x06,0x04,0xe0,0x54,0x7f,0xf0,0x90,0x06,0x0a,0xe0,0x54,0xf8,0xf0,0x22,0x90,
++0x01,0x36,0x74,0x7b,0xf0,0xa3,0x74,0x02,0xf0,0x7d,0x7b,0xff,0x12,0x36,0xe6,0x7d,
++0x02,0x7f,0x03,0x12,0x36,0xe6,0x90,0x06,0x04,0xe0,0x44,0x80,0xf0,0x90,0x06,0x0a,
++0xe0,0x44,0x07,0xf0,0x12,0x62,0x4c,0xe5,0x60,0x20,0xe0,0x05,0xe4,0x90,0x9e,0x58,
++0xf0,0x22,0x8b,0x14,0x8a,0x15,0x89,0x16,0x12,0x60,0xb1,0xab,0x14,0xaa,0x15,0xa9,
++0x16,0x12,0x29,0xd9,0xf5,0x63,0x14,0x60,0x0e,0x14,0x60,0x1e,0x14,0x60,0x2f,0x24,
++0x03,0x70,0x40,0x7f,0x01,0x80,0x3a,0xab,0x14,0xaa,0x15,0xa9,0x16,0x90,0x00,0x02,
++0x12,0x42,0x20,0xfd,0xe4,0xff,0xd1,0x84,0x80,0x27,0xab,0x14,0xaa,0x15,0xa9,0x16,
++0x90,0x00,0x02,0x12,0x42,0x20,0xfd,0x7f,0x01,0xd1,0x84,0x1f,0x80,0x13,0xab,0x14,
++0xaa,0x15,0xa9,0x16,0x90,0x00,0x02,0x12,0x42,0x20,0xfd,0x7f,0x02,0xd1,0x84,0xe4,
++0xff,0xb1,0xbc,0x22,0xef,0x24,0xfe,0x60,0x0b,0x04,0x70,0x22,0x90,0x9e,0x65,0x74,
++0x01,0xf0,0x80,0x16,0xed,0x70,0x0a,0x90,0x9e,0x62,0xe0,0x90,0x9e,0x65,0xf0,0x80,
++0x05,0x90,0x9e,0x65,0xed,0xf0,0x90,0x9e,0x65,0xe0,0x90,0x9e,0x56,0xf0,0x22,0x53,
++0x61,0xf0,0x43,0x61,0x01,0x12,0x45,0x00,0x12,0x45,0x01,0x53,0x61,0xf0,0x43,0x61,
++0x02,0x22,0x90,0x9e,0xaf,0xef,0xf0,0x12,0x74,0x53,0x90,0x9e,0xaf,0xe0,0x60,0x05,
++0x90,0x05,0x22,0xe4,0xf0,0x53,0x61,0xf0,0x43,0x61,0x04,0x22,0x90,0x06,0x04,0xe0,
++0x54,0xbf,0xf0,0xef,0x60,0x09,0xe5,0x60,0xb4,0x01,0x04,0xe4,0xff,0xd1,0xf6,0x53,
++0x61,0xf0,0x43,0x61,0x0c,0x22,0x8f,0x27,0x12,0x45,0xb0,0xbf,0x01,0x22,0x90,0x9e,
++0x7a,0xe0,0xff,0x7d,0x01,0x12,0x47,0x79,0xab,0x07,0xaa,0x06,0xad,0x03,0xac,0x02,
++0xaf,0x27,0x12,0x60,0x2a,0xaf,0x03,0x12,0x5f,0xf7,0x90,0x04,0x1f,0x74,0x20,0xf0,
++0x22,0x71,0xc3,0xef,0x64,0x01,0x60,0x08,0x90,0x01,0xb9,0x74,0x01,0xf0,0x80,0x58,
++0xe5,0x64,0x54,0x03,0x60,0x08,0x90,0x01,0xb9,0x74,0x02,0xf0,0x80,0x4a,0xe5,0x62,
++0x54,0x0f,0xd3,0x94,0x02,0x40,0x08,0x90,0x01,0xb9,0x74,0x04,0xf0,0x80,0x39,0xe5,
++0x64,0x30,0xe2,0x08,0x90,0x01,0xb9,0x74,0x08,0xf0,0x80,0x2c,0xe5,0x64,0x30,0xe4,
++0x08,0x90,0x01,0xb9,0x74,0x10,0xf0,0x80,0x1f,0x90,0x9e,0x58,0xe0,0x60,0x08,0x90,
++0x01,0xb9,0x74,0x20,0xf0,0x80,0x11,0x90,0x9e,0x5e,0xe0,0x60,0x08,0x90,0x01,0xb9,
++0x74,0x80,0xf0,0x80,0x03,0x7f,0x01,0x22,0x90,0x01,0xb8,0x74,0x04,0xf0,0x7f,0x00,
++0x22,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0,0x82,0xc0,0xd0,0x75,0xd0,0x00,0xc0,0x00,
++0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0x90,0x01,
++0xc4,0x74,0x91,0xf0,0x74,0x57,0xa3,0xf0,0x53,0x91,0xef,0x90,0x00,0x51,0xe0,0xff,
++0x90,0x00,0x55,0xe0,0x5f,0xf5,0x3d,0x90,0x00,0x52,0xe0,0xff,0x90,0x00,0x56,0xe0,
++0x5f,0xf5,0x3e,0xe5,0x3d,0x30,0xe4,0x06,0x90,0x00,0x55,0x74,0x10,0xf0,0xe5,0x3d,
++0x30,0xe5,0x06,0x90,0x00,0x55,0x74,0x20,0xf0,0xe5,0x3d,0x30,0xe6,0x1b,0x90,0x00,
++0x55,0x74,0x40,0xf0,0x90,0x9e,0x42,0xe0,0x54,0x03,0xff,0xbf,0x03,0x0b,0x90,0x9e,
++0x3f,0xe0,0x60,0x05,0x7f,0x01,0x12,0x49,0x1a,0xe5,0x3d,0x30,0xe7,0x15,0x90,0x00,
++0x55,0x74,0x80,0xf0,0x90,0x9e,0x42,0xe0,0x54,0x03,0xff,0xbf,0x03,0x05,0x7f,0x02,
++0x12,0x49,0x1a,0xe5,0x3e,0x30,0xe0,0x06,0x90,0x00,0x56,0x74,0x01,0xf0,0xe5,0x3e,
++0x30,0xe1,0x06,0x90,0x00,0x56,0x74,0x02,0xf0,0xe5,0x3e,0x30,0xe2,0x06,0x90,0x00,
++0x56,0x74,0x04,0xf0,0xe5,0x3e,0x30,0xe3,0x06,0x90,0x00,0x56,0x74,0x08,0xf0,0x90,
++0x01,0xc4,0x74,0x91,0xf0,0x74,0x57,0xa3,0xf0,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,
++0x04,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,0xd0,0x82,0xd0,0x83,0xd0,
++0xf0,0xd0,0xe0,0x32,0x90,0x01,0xcc,0xe0,0x54,0x0f,0x90,0x9e,0x19,0xf0,0x90,0x9e,
++0x19,0xe0,0xfd,0x70,0x02,0x21,0xb5,0x90,0x9e,0xae,0xe0,0xff,0x74,0x01,0x7e,0x00,
++0xa8,0x07,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0xef,0x5d,0x70,
++0x02,0x21,0xae,0x90,0x9e,0xae,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd0,0x12,0x43,0x5f,
++0xe0,0x90,0x9e,0x1a,0xf0,0x75,0x23,0x01,0x75,0x24,0x9e,0x75,0x25,0x1a,0x75,0x26,
++0x01,0x7b,0x01,0x7a,0x9e,0x79,0x1b,0x12,0x45,0x09,0x90,0x9e,0x1b,0xe0,0xff,0xc4,
++0x13,0x13,0x13,0x54,0x01,0x90,0x9e,0xae,0x30,0xe0,0x59,0xe0,0x75,0xf0,0x02,0x90,
++0x00,0x88,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x1c,0xf0,0x90,0x9e,0xae,0xe0,0x75,0xf0,
++0x02,0x90,0x00,0x89,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x1d,0xf0,0x90,0x9e,0xae,0xe0,
++0x75,0xf0,0x04,0x90,0x01,0xd1,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x1e,0xf0,0x90,0x9e,
++0xae,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd2,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x1f,0xf0,
++0x90,0x9e,0xae,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd3,0x12,0x43,0x5f,0xe0,0x90,0x9e,
++0x20,0xf0,0x80,0x33,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd1,0x12,0x43,0x5f,0xe0,0x90,
++0x9e,0x1c,0xf0,0x90,0x9e,0xae,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd2,0x12,0x43,0x5f,
++0xe0,0x90,0x9e,0x1d,0xf0,0x90,0x9e,0xae,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd3,0x12,
++0x43,0x5f,0xe0,0x90,0x9e,0x1e,0xf0,0xef,0x54,0x7f,0xff,0x7b,0x01,0x7a,0x9e,0x79,
++0x1c,0x31,0xb6,0x90,0x9e,0x19,0xe0,0xff,0x90,0x9e,0xae,0xe0,0xfe,0x74,0x01,0xa8,
++0x06,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0x5f,0x90,0x9e,0x19,0xf0,0x90,0x9e,
++0xae,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0x90,0x01,
++0xcc,0xf0,0x90,0x9e,0xae,0xe0,0x04,0xf0,0xe0,0x54,0x03,0xf0,0x01,0x7e,0x90,0x01,
++0xc6,0xe0,0x44,0x02,0xf0,0x22,0x90,0x9e,0x21,0x12,0x43,0x8b,0xef,0x12,0x43,0x94,
++0x59,0xfc,0x01,0x59,0xf4,0x02,0x5a,0x20,0x03,0x5a,0x29,0x05,0x5a,0x32,0x06,0x5a,
++0x7e,0x07,0x5a,0x3a,0x09,0x5a,0x43,0x0b,0x5a,0x4c,0x0c,0x5a,0x55,0x0d,0x5a,0x5e,
++0x0e,0x5a,0x67,0x1b,0x5a,0x6f,0x1c,0x5a,0x05,0x2d,0x5a,0x0e,0x2e,0x5a,0x17,0x3b,
++0x00,0x00,0x5a,0x77,0x90,0x9e,0x21,0x12,0x43,0x6b,0xe1,0xe9,0x90,0x9e,0x21,0x12,
++0x43,0x6b,0x02,0x71,0xd0,0x90,0x9e,0x21,0x12,0x43,0x6b,0x02,0x72,0x0b,0x90,0x9e,
++0x21,0x12,0x43,0x6b,0x02,0x72,0x53,0x90,0x9e,0x21,0x12,0x43,0x6b,0x02,0x72,0x8c,
++0x90,0x9e,0x21,0x12,0x43,0x6b,0x02,0x72,0xb6,0x90,0x9e,0x21,0x12,0x43,0x6b,0x02,
++0x70,0x4a,0x90,0x9e,0x21,0x12,0x43,0x6b,0x80,0x45,0x90,0x9e,0x21,0x12,0x43,0x6b,
++0x02,0x72,0xfe,0x90,0x9e,0x21,0x12,0x43,0x6b,0x02,0x70,0xa2,0x90,0x9e,0x21,0x12,
++0x43,0x6b,0x02,0x49,0xc2,0x90,0x9e,0x21,0x12,0x43,0x6b,0x02,0x7b,0x16,0x90,0x9e,
++0x21,0x12,0x43,0x6b,0x02,0x4a,0xfc,0x90,0x9e,0x21,0x12,0x43,0x6b,0xe1,0xef,0x90,
++0x9e,0x21,0x12,0x43,0x6b,0xe1,0xd1,0x90,0x01,0xc6,0xe0,0x44,0x01,0xf0,0x22,0x90,
++0x00,0x04,0x12,0x42,0x20,0xff,0x54,0x1f,0xfe,0xef,0x54,0x20,0xc4,0x13,0x54,0x07,
++0xfd,0xaf,0x06,0x90,0x9e,0x24,0xef,0xf0,0xa3,0xed,0xf0,0xa3,0x12,0x43,0x8b,0x90,
++0x9e,0x26,0x12,0x43,0x6b,0x90,0x00,0x03,0x12,0x42,0x20,0x54,0xf0,0xc4,0x54,0x0f,
++0x90,0x9e,0x29,0xf0,0x90,0x00,0x04,0x12,0x42,0x20,0x54,0x40,0xc4,0x13,0x13,0x54,
++0x03,0x90,0x9e,0x2a,0xf0,0x90,0x9e,0x24,0xe0,0xff,0x75,0xf0,0x09,0x90,0x96,0x46,
++0x12,0x43,0x5f,0xad,0x82,0xac,0x83,0x90,0x9e,0x2b,0xec,0xf0,0xa3,0xed,0xf0,0xef,
++0x75,0xf0,0x09,0xa4,0x24,0x44,0xf9,0x74,0x96,0x35,0xf0,0xfa,0x7b,0x01,0xa3,0x12,
++0x43,0x8b,0x90,0x9e,0x26,0x12,0x43,0x6b,0x90,0x00,0x03,0x12,0x42,0x20,0x54,0x0f,
++0xff,0x90,0x9e,0x2d,0x12,0x43,0x6b,0xef,0x12,0x42,0x4d,0x90,0x9e,0x26,0x12,0x43,
++0x6b,0x90,0x00,0x02,0x12,0x42,0x20,0xff,0x90,0x9e,0x2d,0x12,0x43,0x6b,0x90,0x00,
++0x01,0xef,0x12,0x42,0x5f,0x90,0x9e,0x26,0x12,0x43,0x6b,0x90,0x00,0x01,0x12,0x42,
++0x20,0xff,0x90,0x9e,0x2b,0xe0,0xfc,0xa3,0xe0,0xfd,0xf5,0x82,0x8c,0x83,0xef,0xf0,
++0x12,0x29,0xd9,0x8d,0x82,0x8c,0x83,0xa3,0xf0,0x90,0x9e,0x29,0xe0,0xfe,0x90,0x9e,
++0x24,0xe0,0xff,0x24,0x82,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xee,0xf0,0x90,0x9e,
++0x25,0xe0,0xfe,0x75,0xf0,0x09,0xef,0x90,0x96,0x4a,0x12,0x43,0x5f,0xee,0xf0,0x75,
++0xf0,0x09,0xef,0x90,0x96,0x4b,0x12,0x43,0x5f,0x74,0x01,0xf0,0x90,0x9e,0x2a,0xe0,
++0xfe,0x75,0xf0,0x09,0xef,0x90,0x96,0x4c,0x12,0x43,0x5f,0xee,0xf0,0x8f,0x14,0xef,
++0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xaf,0x82,0xf5,0x16,0x8f,0x17,0xe5,
++0x14,0x75,0xf0,0x02,0xa4,0x24,0x02,0xf9,0x74,0x95,0x35,0xf0,0x75,0x18,0x01,0xf5,
++0x19,0x89,0x1a,0x75,0xf0,0x09,0xe5,0x14,0x90,0x96,0x46,0x12,0x43,0x5f,0xaf,0x82,
++0x85,0x83,0x1b,0x8f,0x1c,0xe5,0x14,0x75,0xf0,0x09,0xa4,0x24,0x44,0xf9,0x74,0x96,
++0x35,0xf0,0x75,0x1d,0x01,0xf5,0x1e,0x89,0x1f,0x74,0x82,0x25,0x14,0xf5,0x82,0xe4,
++0x34,0x95,0xf5,0x83,0xe0,0x12,0x43,0x94,0x5c,0x0d,0x00,0x5c,0x22,0x01,0x5c,0x37,
++0x02,0x5c,0x4c,0x03,0x5c,0x75,0x04,0x5c,0x8a,0x05,0x5c,0x9f,0x06,0x5c,0xc5,0x0c,
++0x5c,0xf2,0x0d,0x5d,0x1f,0x0e,0x5d,0x4c,0x0f,0x00,0x00,0x5d,0x80,0xe5,0x14,0x25,
++0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0x74,0xf0,0xf0,0xa3,0x74,0x15,
++0x80,0x3c,0xe5,0x14,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0x74,
++0xf0,0xf0,0xa3,0x74,0x10,0x80,0x27,0xe5,0x14,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,
++0x34,0x9b,0xf5,0x83,0x74,0xf0,0xf0,0xa3,0x74,0x05,0x80,0x12,0xe5,0x14,0x25,0xe0,
++0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0x74,0xf0,0xf0,0xa3,0xe4,0xf0,0xe5,
++0x14,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0x74,0x0f,0xf0,0xa3,
++0x74,0x8f,0xf0,0xa1,0x80,0xe5,0x14,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,
++0xf5,0x83,0x74,0x0f,0xf0,0xa3,0x74,0xf5,0x80,0x27,0xe5,0x14,0x25,0xe0,0x24,0xc6,
++0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0x74,0x0f,0xf0,0xa3,0x74,0xf0,0x80,0x12,0xe5,
++0x14,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe4,0xf0,0xa3,0x74,
++0x0d,0xf0,0xe5,0x14,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe4,
++0xf0,0xa3,0xf0,0xa1,0x80,0x90,0x04,0x47,0xe0,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x12,
++0x42,0x4d,0x90,0x04,0x46,0xe0,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x90,0x00,0x01,0x12,
++0x42,0x5f,0x90,0x04,0x45,0xe0,0x85,0x17,0x82,0x85,0x16,0x83,0xf0,0x90,0x04,0x44,
++0xa1,0x77,0x90,0x04,0x4b,0xe0,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x12,0x42,0x4d,0x90,
++0x04,0x4a,0xe0,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x90,0x00,0x01,0x12,0x42,0x5f,0x90,
++0x04,0x49,0xe0,0x85,0x17,0x82,0x85,0x16,0x83,0xf0,0x90,0x04,0x48,0x80,0x58,0x90,
++0x04,0x4f,0xe0,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x12,0x42,0x4d,0x90,0x04,0x4e,0xe0,
++0xab,0x18,0xaa,0x19,0xa9,0x1a,0x90,0x00,0x01,0x12,0x42,0x5f,0x90,0x04,0x4d,0xe0,
++0x85,0x17,0x82,0x85,0x16,0x83,0xf0,0x90,0x04,0x4c,0x80,0x2b,0x90,0x04,0x53,0xe0,
++0xab,0x18,0xaa,0x19,0xa9,0x1a,0x12,0x42,0x4d,0x90,0x04,0x52,0xe0,0xab,0x18,0xaa,
++0x19,0xa9,0x1a,0x90,0x00,0x01,0x12,0x42,0x5f,0x90,0x04,0x51,0xe0,0x85,0x17,0x82,
++0x85,0x16,0x83,0xf0,0x90,0x04,0x50,0xe0,0x85,0x17,0x82,0x85,0x16,0x83,0xa3,0xf0,
++0xab,0x18,0xaa,0x19,0xa9,0x1a,0xc0,0x03,0xc0,0x02,0xc0,0x01,0x12,0x29,0xd9,0xff,
++0xab,0x1d,0xaa,0x1e,0xa9,0x1f,0x12,0x29,0xd9,0x5f,0xd0,0x01,0xd0,0x02,0xd0,0x03,
++0x12,0x42,0x4d,0xab,0x18,0xe5,0x1a,0x24,0x01,0xf9,0xe4,0x35,0x19,0xfa,0xc0,0x03,
++0xc0,0x02,0xc0,0x01,0x12,0x29,0xd9,0xff,0xab,0x1d,0xaa,0x1e,0xa9,0x1f,0x90,0x00,
++0x01,0x12,0x42,0x20,0x5f,0xd0,0x01,0xd0,0x02,0xd0,0x03,0x12,0x42,0x4d,0x85,0x17,
++0x82,0x85,0x16,0x83,0xc0,0x83,0xc0,0x82,0xe0,0xff,0x85,0x1c,0x82,0x85,0x1b,0x83,
++0xe0,0xfe,0xef,0x5e,0xd0,0x82,0xd0,0x83,0xf0,0x85,0x17,0x82,0x85,0x16,0x83,0xa3,
++0xc0,0x83,0xc0,0x82,0xe0,0xff,0x85,0x1c,0x82,0x85,0x1b,0x83,0xa3,0xe0,0xfe,0xef,
++0x5e,0xd0,0x82,0xd0,0x83,0xf0,0xe5,0x14,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,
++0x95,0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0x4e,0x60,0x3b,0x75,0x15,0x0b,0x74,0x01,0x7e,
++0x00,0xa8,0x15,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0xe5,0x14,
++0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0,0x5e,0xfe,0xa3,0xe0,
++0x5f,0x4e,0x60,0x06,0xe5,0x15,0x24,0x10,0x80,0x5d,0x15,0x15,0xe5,0x15,0xc3,0x94,
++0x00,0x50,0xca,0x80,0x56,0xe5,0x14,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,
++0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0x4e,0x60,0x3d,0x75,0x15,0x0f,0x74,0x01,0x7e,0x00,
++0xa8,0x15,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0xe5,0x14,0x25,
++0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe0,0x5e,0xfe,0xa3,0xe0,0x5f,
++0x4e,0x60,0x08,0x90,0x9e,0x30,0xe5,0x15,0xf0,0x80,0x10,0x15,0x15,0xe5,0x15,0xc3,
++0x94,0x00,0x50,0xc8,0x80,0x05,0xe4,0x90,0x9e,0x30,0xf0,0xe5,0x14,0x25,0xe0,0x24,
++0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0x4e,0x60,0x3b,0xe4,
++0xf5,0x15,0x74,0x01,0x7e,0x00,0xa8,0x15,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,
++0xd8,0xf9,0xff,0xe5,0x14,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,
++0xe0,0x5e,0xfe,0xa3,0xe0,0x5f,0x4e,0x60,0x08,0x90,0x9e,0x31,0xe5,0x15,0xf0,0x80,
++0x5b,0x05,0x15,0xe5,0x15,0xb4,0x10,0xca,0x80,0x52,0xe5,0x14,0x25,0xe0,0x24,0x02,
++0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0x4e,0x60,0x39,0xe4,0xf5,
++0x15,0x74,0x01,0x7e,0x00,0xa8,0x15,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,
++0xf9,0xff,0xe5,0x14,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0,
++0x5e,0xfe,0xa3,0xe0,0x5f,0x4e,0x60,0x06,0xe5,0x15,0x24,0x10,0x80,0x0a,0x05,0x15,
++0xe5,0x15,0xb4,0x0c,0xcc,0x80,0x05,0xe4,0x90,0x9e,0x31,0xf0,0x90,0x9e,0x30,0xe0,
++0xff,0x75,0xf0,0x09,0xe5,0x14,0x90,0x96,0x48,0x12,0x43,0x5f,0xef,0xf0,0x90,0x9e,
++0x31,0xe0,0xfe,0x75,0xf0,0x09,0xe5,0x14,0x90,0x96,0x49,0x12,0x43,0x5f,0xee,0xf0,
++0x74,0x84,0x25,0x14,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0,0xd3,0x9f,0x40,0x06,
++0x90,0x9e,0x30,0x12,0x62,0x94,0x74,0x84,0x25,0x14,0xf5,0x82,0xe4,0x34,0x04,0xf5,
++0x83,0xe0,0xff,0x90,0x9e,0x31,0xe0,0xfe,0xef,0xc3,0x9e,0x50,0x03,0x12,0x62,0x94,
++0x90,0x9e,0x30,0xe0,0xff,0xd3,0x94,0x13,0x40,0x07,0x90,0x96,0x43,0x74,0x03,0xf0,
++0x22,0xef,0xd3,0x94,0x0b,0x40,0x07,0x90,0x96,0x43,0x74,0x02,0xf0,0x22,0xef,0xd3,
++0x94,0x03,0x40,0x07,0x90,0x96,0x43,0x74,0x01,0xf0,0x22,0xe4,0x90,0x96,0x43,0xf0,
++0x22,0x90,0x00,0x04,0x12,0x42,0x20,0xff,0x54,0x3f,0xfe,0xef,0x54,0x80,0xc4,0x13,
++0x13,0x13,0x54,0x01,0xfd,0xaf,0x06,0x41,0x93,0x12,0x29,0xd9,0xf5,0x60,0x22,0x12,
++0x29,0xd9,0x90,0x95,0x01,0xf0,0x22,0xad,0x07,0x74,0x11,0x2d,0xf5,0x82,0xe4,0x34,
++0xfc,0xf5,0x83,0xe0,0x44,0x01,0xf0,0x90,0x04,0x80,0xe0,0x54,0x0f,0xfc,0x74,0x14,
++0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xc0,0x4c,0xfd,0x74,0x14,0x2f,
++0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xed,0xf0,0x22,0xef,0x60,0x0f,0x74,0x21,0x2d,
++0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x10,0xf0,0x22,0x74,0x21,0x2d,0xf5,
++0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xef,0xf0,0x22,0xe4,0xf5,0x60,0xf5,0x64,
++0xf5,0x63,0x75,0x62,0x0c,0x75,0x61,0x0c,0x90,0x9e,0x66,0xf0,0x90,0x9e,0x64,0xf0,
++0x90,0x9e,0x63,0xf0,0x90,0x9e,0x65,0x04,0xf0,0x90,0x9e,0x56,0xf0,0xe4,0x90,0x9e,
++0x67,0xf0,0x90,0x9e,0x58,0xf0,0x90,0x9e,0x61,0x74,0x07,0xf0,0xe4,0x90,0x9e,0x57,
++0xf0,0x90,0x9e,0x5f,0xf0,0xa3,0x74,0x03,0xf0,0x90,0x9e,0x5c,0x74,0x0a,0xf0,0xa3,
++0x74,0x05,0xf0,0x90,0x9e,0x5b,0x74,0x14,0xf0,0x90,0x9e,0x62,0x74,0x05,0xf0,0xe4,
++0x90,0x9e,0x5a,0xf0,0x90,0x9e,0x55,0xf0,0x90,0x9e,0x7f,0xf0,0x90,0x9e,0x5e,0xf0,
++0x22,0xe4,0x90,0x9e,0x67,0xf0,0x90,0x9e,0x57,0xf0,0xf5,0x64,0x22,0x7f,0x00,0x22,
++0xe5,0x62,0x30,0xe6,0x19,0xe5,0x62,0x54,0x0f,0xff,0x90,0x9e,0x54,0xe0,0xfe,0x4f,
++0x90,0x01,0x2f,0xf0,0xee,0x64,0x80,0x90,0x9e,0x54,0xf0,0x53,0x62,0xbf,0x22,0xe5,
++0x60,0x64,0x01,0x70,0x68,0xe5,0x63,0x60,0x64,0xe5,0x63,0x64,0x02,0x60,0x06,0xe5,
++0x63,0x64,0x05,0x70,0x27,0x90,0x06,0xab,0xe0,0x90,0x9e,0x56,0xf0,0x90,0x06,0xaa,
++0xe0,0x90,0x9e,0x65,0xf0,0x90,0x9e,0x56,0xe0,0x70,0x07,0x90,0x9e,0x65,0xe0,0xff,
++0x80,0x05,0x90,0x9e,0x56,0xe0,0xff,0x90,0x9e,0x56,0xef,0xf0,0x90,0x9e,0x58,0xe0,
++0x60,0x03,0xe0,0x14,0xf0,0xe4,0x90,0x9e,0x57,0xf0,0x90,0x05,0x58,0x74,0x03,0xf0,
++0x90,0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x53,0x64,0xfd,0x53,0x64,
++0xef,0xe5,0x63,0x14,0x24,0xfd,0x50,0x02,0x80,0x03,0x12,0x45,0x53,0x22,0xe4,0xfb,
++0x90,0x9e,0x9c,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe5,0x63,0x60,0x6a,0xe5,0x60,
++0x64,0x01,0x70,0x64,0xe5,0x63,0x14,0x60,0x2b,0x24,0xfd,0x60,0x27,0x24,0x02,0x24,
++0xfb,0x50,0x02,0x80,0x21,0x90,0x9e,0x56,0xe0,0x14,0xf0,0xe0,0x60,0x04,0xa3,0xe0,
++0x60,0x14,0x90,0x9e,0x56,0xe0,0x70,0x08,0x90,0x9e,0x65,0xe0,0x90,0x9e,0x56,0xf0,
++0x7b,0x01,0x80,0x02,0x7b,0x01,0xeb,0x60,0x2f,0x43,0x64,0x10,0xe4,0x90,0x9e,0x85,
++0xf0,0x90,0x9e,0x57,0xe0,0x75,0xf0,0x03,0xa4,0xff,0x90,0x9e,0x61,0xe0,0x2f,0x12,
++0x44,0x53,0x90,0x01,0x57,0x74,0x05,0xf0,0xe5,0x61,0x54,0x0f,0xc3,0x94,0x04,0x50,
++0x07,0x7d,0x01,0x7f,0x04,0x12,0x54,0xe7,0x22,0xe4,0x90,0x9e,0x15,0xf0,0xe5,0x63,
++0x60,0x79,0x90,0x9e,0x67,0xe0,0x60,0x0d,0xe4,0xf0,0x53,0x64,0xfd,0xe5,0x64,0x54,
++0x07,0x70,0x68,0x80,0x63,0x90,0x9e,0x57,0xe0,0x04,0xf0,0x53,0x64,0xef,0x90,0x9e,
++0x15,0xe0,0xf9,0xff,0x7e,0x00,0x24,0x01,0xfd,0xee,0x33,0xfc,0x90,0x9e,0x57,0xe0,
++0xb5,0x05,0x06,0xe4,0xb5,0x04,0x02,0x80,0x12,0xef,0x24,0x02,0xff,0xe4,0x3e,0xfe,
++0x90,0x9e,0x57,0xe0,0xb5,0x07,0x0a,0xe4,0xb5,0x06,0x06,0x90,0x05,0x58,0xe0,0x04,
++0xf0,0xe9,0xff,0x90,0x9e,0x5c,0xe0,0x2f,0xff,0xe4,0x33,0xfe,0x90,0x9e,0x57,0xe0,
++0xd3,0x9f,0xee,0x64,0x80,0xf8,0x74,0x80,0x98,0x40,0x0d,0xe5,0x60,0xb4,0x01,0x0b,
++0xa3,0xe0,0x70,0x07,0xe0,0x04,0xf0,0x22,0x12,0x44,0xcb,0x22,0x90,0x9e,0x5f,0xe0,
++0xa3,0xe0,0x90,0x05,0x58,0xf0,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,
++0x93,0x12,0x43,0x8b,0x90,0x9e,0x96,0xe0,0x54,0xf0,0x44,0x06,0xff,0xf0,0xed,0x54,
++0x0f,0xc4,0x54,0xf0,0xfe,0xef,0x54,0x0f,0x4e,0xf0,0x90,0x9e,0x93,0x12,0x43,0x6b,
++0x90,0x9e,0x90,0x12,0x43,0x8b,0x7b,0x01,0x7a,0x9e,0x79,0x96,0x12,0x53,0xf1,0xd0,
++0xd0,0x92,0xaf,0x22,0xe0,0xfd,0x74,0x26,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9d,0xf5,
++0x83,0xed,0xf0,0xaf,0x14,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0xef,0xc3,0x94,0x20,
++0x50,0x0e,0x74,0x84,0x2f,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xed,0xf0,0x80,0x29,
++0x74,0xa6,0x2f,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xed,0xf0,0x90,0x9e,0x68,0xef,
++0xf0,0x24,0xa6,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0x90,0x9e,0x69,0xf0,0x7b,
++0x01,0x7a,0x9e,0x79,0x68,0x7d,0x02,0x51,0x57,0xd0,0xd0,0x92,0xaf,0x22,0x8f,0x0a,
++0x8d,0x0b,0xe5,0x0b,0x54,0x1f,0xf5,0x10,0x74,0x01,0x2f,0xf5,0x82,0xe4,0x34,0x94,
++0xf5,0x83,0xe0,0xf5,0x0e,0x90,0x04,0xfd,0xe0,0xb4,0x01,0x05,0x75,0x11,0x03,0x80,
++0x03,0x75,0x11,0x01,0xeb,0xc3,0x95,0x11,0x40,0x04,0xaf,0x0a,0x80,0x33,0xe5,0x0e,
++0x25,0x0d,0xf5,0x0f,0xe5,0x10,0x90,0x41,0xd6,0x93,0xff,0xe5,0x0f,0xd3,0x9f,0x74,
++0x01,0x40,0x11,0x25,0x0a,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83,0xe4,0xf0,0xad,0x0b,
++0xaf,0x0a,0x41,0xa5,0x25,0x0a,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83,0xe5,0x0f,0xf0,
++0x22,0xad,0x07,0x75,0xf0,0x09,0xed,0x90,0x96,0x48,0x12,0x43,0x5f,0xe0,0xff,0x74,
++0x67,0x2d,0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0xe0,0x54,0x1f,0xf5,0x12,0xd3,0x9f,
++0x40,0x02,0x8f,0x12,0xe5,0x12,0x25,0xe0,0x24,0x9e,0xf5,0x82,0xe4,0x34,0x41,0xf5,
++0x83,0xe4,0x93,0xfe,0x74,0x01,0x93,0xff,0xe5,0x12,0x25,0xe0,0x24,0x66,0xf5,0x82,
++0xe4,0x34,0x41,0xf5,0x83,0x74,0x01,0x93,0x2f,0xff,0xe4,0x93,0x3e,0xc3,0x13,0xfe,
++0xef,0x13,0xff,0xed,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xee,
++0xf0,0xa3,0xef,0xf0,0xaf,0x05,0xad,0x12,0x51,0xa5,0xaf,0x12,0x22,0xac,0x07,0xec,
++0xc3,0x94,0x20,0x50,0x0d,0x74,0x84,0x2c,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0,
++0x80,0x0b,0x74,0xa6,0x2c,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0x54,0x7f,0xf5,
++0x1f,0xe5,0x1f,0x54,0x1f,0xff,0x90,0x9e,0x25,0xf0,0x75,0xf0,0x09,0xec,0x90,0x96,
++0x49,0x12,0x43,0x5f,0xe0,0x90,0x9e,0x27,0xf0,0x75,0xf0,0x09,0xec,0x90,0x96,0x48,
++0x12,0x43,0x5f,0xe0,0xfe,0x90,0x9e,0x28,0xf0,0xec,0x25,0xe0,0x24,0xc6,0xf5,0x82,
++0xe4,0x34,0x9b,0xf5,0x83,0xe0,0xfb,0xa3,0xe0,0x90,0x9e,0x29,0xcb,0xf0,0xa3,0xeb,
++0xf0,0xec,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0,0xfb,0xa3,
++0xe0,0x90,0x9e,0x2b,0xcb,0xf0,0xa3,0xeb,0xf0,0xef,0xd3,0x9e,0x40,0x0a,0x90,0x9e,
++0x28,0xe0,0x90,0x9e,0x25,0xf0,0xf5,0x1f,0xed,0x70,0x02,0xa1,0x13,0x90,0x9e,0x26,
++0xed,0xf0,0xe5,0x1f,0x30,0xe6,0x0a,0x90,0x9e,0x25,0xe0,0xf5,0x1f,0xa3,0xe0,0x14,
++0xf0,0x90,0x9e,0x26,0xe0,0x70,0x02,0xa1,0x13,0x90,0x9e,0x25,0xe0,0xff,0xd3,0x94,
++0x00,0x50,0x02,0xa1,0x13,0xe4,0x90,0x9e,0x24,0xf0,0xef,0x14,0x90,0x9e,0x23,0xf0,
++0x90,0x9e,0x27,0xe0,0xfd,0x90,0x9e,0x23,0xe0,0xff,0xd3,0x9d,0x40,0x6b,0xef,0x94,
++0x10,0x40,0x21,0xef,0x24,0xf0,0xff,0x74,0x01,0x7e,0x00,0xa8,0x07,0x08,0x80,0x05,
++0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x9e,0x2b,0xe0,0x5e,0xfe,0xa3,0xe0,
++0x5f,0x4e,0x70,0x27,0x90,0x9e,0x23,0xe0,0xff,0xc3,0x94,0x10,0x50,0x33,0x74,0x01,
++0x7e,0x00,0xa8,0x07,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,
++0x9e,0x29,0xe0,0x5e,0xfe,0xa3,0xe0,0x5f,0x4e,0x60,0x16,0x90,0x9e,0x23,0xe0,0xf5,
++0x1f,0xa3,0xe0,0x04,0xf0,0x90,0x9e,0x26,0xe0,0xff,0x90,0x9e,0x24,0xe0,0x6f,0x60,
++0x08,0x90,0x9e,0x23,0xe0,0x14,0xf0,0x80,0x87,0x90,0x9e,0x26,0xe0,0xff,0x90,0x9e,
++0x24,0xe0,0xc3,0x9f,0x50,0x0d,0x90,0x9e,0x23,0xe0,0xb5,0x05,0x06,0x90,0x9e,0x27,
++0xe0,0xf5,0x1f,0xe5,0x1f,0x25,0xe0,0x24,0x9e,0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83,
++0xe4,0x93,0xfe,0x74,0x01,0x93,0xff,0xe5,0x1f,0x25,0xe0,0x24,0x66,0xf5,0x82,0xe4,
++0x34,0x41,0xf5,0x83,0x74,0x01,0x93,0x2f,0xff,0xe4,0x93,0x3e,0xc3,0x13,0xfe,0xef,
++0x13,0xff,0xec,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xee,0xf0,
++0xa3,0xef,0xf0,0xaf,0x04,0xad,0x1f,0x51,0xa5,0xaf,0x1f,0x22,0xad,0x07,0xed,0xc3,
++0x94,0x20,0x50,0x0d,0x74,0x84,0x2d,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0,0x80,
++0x0b,0x74,0xa6,0x2d,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0x54,0x7f,0xf5,0x1f,
++0xe5,0x1f,0x54,0x1f,0xfc,0x75,0xf0,0x09,0xed,0x90,0x96,0x48,0x12,0x43,0x5f,0xe0,
++0xff,0x90,0x9e,0x23,0xf0,0xed,0x25,0xe0,0x24,0x02,0xf5,0x82,0xe4,0x34,0x95,0xf5,
++0x83,0xe0,0xfb,0xa3,0xe0,0x90,0x9e,0x24,0xcb,0xf0,0xa3,0xeb,0xf0,0xed,0x25,0xe0,
++0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe0,0xfb,0xa3,0xe0,0x90,0x9e,0x26,
++0xcb,0xf0,0xa3,0xeb,0xf0,0xec,0x25,0xe0,0x24,0x66,0xf5,0x82,0xe4,0x34,0x41,0xf5,
++0x83,0xe4,0x93,0xfa,0x74,0x01,0x93,0xfb,0xed,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,
++0x34,0x95,0xf5,0x83,0xea,0xf0,0xa3,0xeb,0xf0,0xec,0xc3,0x9f,0x40,0x02,0xc1,0x7a,
++0x74,0x67,0x2d,0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0xec,0xf0,0x04,0xfb,0x90,0x9e,
++0x23,0xe0,0xff,0xeb,0xd3,0x9f,0x40,0x02,0xc1,0xab,0xeb,0xc3,0x94,0x10,0x40,0x21,
++0xeb,0x24,0xf0,0xff,0x74,0x01,0x7e,0x00,0xa8,0x07,0x08,0x80,0x05,0xc3,0x33,0xce,
++0x33,0xce,0xd8,0xf9,0xff,0x90,0x9e,0x24,0xe0,0x5e,0xfe,0xa3,0xe0,0x5f,0x4e,0x70,
++0x23,0xeb,0xc3,0x94,0x10,0x50,0x40,0x74,0x01,0x7e,0x00,0xa8,0x03,0x08,0x80,0x05,
++0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x9e,0x26,0xe0,0x5e,0xfe,0xa3,0xe0,
++0x5f,0x4e,0x60,0x23,0xbb,0x11,0x09,0x90,0x9e,0x25,0xe0,0x30,0xe7,0x02,0x7b,0x17,
++0xeb,0x64,0x13,0x60,0x03,0xbb,0x12,0x09,0x90,0x9e,0x24,0xe0,0x30,0xe0,0x02,0x7b,
++0x18,0xac,0x03,0x8c,0x1f,0x80,0x34,0x0b,0x80,0x84,0x90,0x9e,0x23,0xe0,0xfb,0x6c,
++0x70,0x69,0x74,0x67,0x2d,0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0xec,0xf0,0x75,0xf0,
++0x09,0xed,0x90,0x96,0x4a,0x12,0x43,0x5f,0xe0,0xb4,0x01,0x0c,0xe5,0x1f,0x20,0xe6,
++0x07,0xec,0x44,0x40,0xf5,0x1f,0x80,0x03,0xaf,0x1f,0x22,0xec,0x25,0xe0,0x24,0x9e,
++0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83,0xe4,0x93,0xfe,0x74,0x01,0x93,0xff,0xec,0x25,
++0xe0,0x24,0x66,0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83,0x74,0x01,0x93,0x2f,0xff,0xe4,
++0x93,0x3e,0xc3,0x13,0xfe,0xef,0x13,0xff,0xed,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,
++0x34,0x95,0xf5,0x83,0xee,0xf0,0xa3,0xef,0xf0,0x80,0x5b,0xec,0xd3,0x9b,0x40,0x56,
++0x90,0x9e,0x23,0xe0,0xff,0x74,0x67,0x2d,0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0xef,
++0xf0,0xac,0x07,0x8f,0x1f,0xec,0x25,0xe0,0x24,0x9e,0xf5,0x82,0xe4,0x34,0x41,0xf5,
++0x83,0xe4,0x93,0xfe,0x74,0x01,0x93,0xff,0xec,0x25,0xe0,0x24,0x66,0xf5,0x82,0xe4,
++0x34,0x41,0xf5,0x83,0x74,0x01,0x93,0x2f,0xff,0xe4,0x93,0x3e,0xc3,0x13,0xfe,0xef,
++0x13,0xff,0xed,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xee,0xf0,
++0xa3,0xef,0xf0,0xaf,0x1f,0x22,0x74,0x01,0x2d,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83,
++0xe4,0xf0,0xaf,0x05,0xe5,0x1f,0x44,0x80,0xfd,0x51,0xa5,0xe5,0x1f,0x44,0x80,0xff,
++0x22,0xef,0xc3,0x94,0x20,0x50,0x39,0xef,0x30,0xe0,0x17,0xed,0xc4,0x54,0xf0,0xfd,
++0xef,0xc3,0x13,0xfe,0x24,0xa4,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0,0x54,0x0f,
++0x80,0x10,0xef,0xc3,0x13,0xfe,0x24,0xa4,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0,
++0x54,0xf0,0xf0,0x74,0xa4,0x2e,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0xe0,0x4d,0xf0,
++0x22,0xe4,0xf5,0x14,0xe5,0x14,0xb4,0x20,0x14,0x90,0x9a,0xc5,0xe0,0x04,0xf0,0x90,
++0x95,0x01,0xe0,0xff,0x90,0x9a,0xc5,0xe0,0xb5,0x07,0x02,0xe4,0xf0,0x75,0xf0,0x09,
++0xe5,0x14,0x90,0x96,0x4b,0x12,0x43,0x5f,0xe0,0x64,0x01,0x60,0x03,0x02,0x6e,0x6a,
++0xe5,0x14,0x25,0xe0,0x24,0x80,0xf5,0x82,0xe4,0x34,0x93,0xf5,0x83,0xe0,0xfe,0xa3,
++0xe0,0xd3,0x94,0x00,0xee,0x94,0x00,0x50,0x03,0x02,0x6e,0x6a,0xe5,0x14,0x94,0x20,
++0x40,0x09,0x90,0x9a,0xc5,0xe0,0x60,0x03,0x02,0x6e,0x76,0xe5,0x14,0x75,0xf0,0x0a,
++0xa4,0x24,0x00,0xf9,0x74,0x90,0x35,0xf0,0x75,0x18,0x01,0xf5,0x19,0x89,0x1a,0xe5,
++0x14,0x25,0xe0,0x24,0x80,0xf5,0x82,0xe4,0x34,0x93,0xf5,0x83,0xe0,0xff,0xa3,0xe0,
++0x90,0x9e,0x1b,0xcf,0xf0,0xa3,0xef,0xf0,0xe5,0x14,0x25,0xe0,0x24,0xc4,0xf5,0x82,
++0xe4,0x34,0x98,0xf5,0x83,0xe0,0xff,0xa3,0xe0,0x90,0x9e,0x1d,0xcf,0xf0,0xa3,0xef,
++0xf0,0xe5,0x14,0xc3,0x94,0x20,0x50,0x14,0x74,0x84,0x25,0x14,0xf5,0x82,0xe4,0x34,
++0x04,0xf5,0x83,0xe0,0x54,0x3f,0x90,0x9e,0x19,0xf0,0x80,0x12,0x74,0xa6,0x25,0x14,
++0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0x54,0x3f,0x90,0x9e,0x19,0xf0,0x90,0x9e,
++0x19,0xe0,0xfe,0x54,0x1f,0xa3,0xf0,0x75,0xf0,0x09,0xe5,0x14,0x90,0x96,0x48,0x12,
++0x43,0x5f,0xe0,0x90,0x9e,0x20,0xf0,0x74,0xe6,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9c,
++0xf5,0x83,0xe0,0xc3,0x94,0x05,0x40,0x02,0x41,0x9f,0x90,0x9e,0x20,0xe0,0xff,0x90,
++0x9e,0x1a,0xe0,0x9f,0x40,0x13,0x90,0x9e,0x20,0xe0,0x90,0x9e,0x1a,0xf0,0xee,0x54,
++0x40,0xfe,0x90,0x9e,0x19,0xf0,0xef,0x4e,0xf0,0x90,0x04,0xfd,0xe0,0x54,0x05,0x64,
++0x01,0x70,0x29,0x90,0x9e,0x1a,0xe0,0xff,0x90,0x41,0x4a,0x93,0xfe,0x74,0x44,0x25,
++0x14,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xc3,0x9e,0x40,0x06,0xef,0x90,0x40,
++0xda,0x80,0x30,0x90,0x9e,0x1a,0xe0,0x90,0x40,0xf6,0x80,0x27,0x90,0x9e,0x1a,0xe0,
++0xff,0x90,0x41,0x4a,0x93,0xfe,0x74,0x44,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9a,0xf5,
++0x83,0xe0,0xc3,0x9e,0x40,0x06,0xef,0x90,0x41,0x12,0x80,0x07,0x90,0x9e,0x1a,0xe0,
++0x90,0x41,0x2e,0x93,0x90,0x9e,0x1f,0xf0,0x90,0x9e,0x1f,0xe0,0x75,0xf0,0x06,0xa4,
++0x24,0x50,0xf9,0x74,0x40,0x35,0xf0,0xfa,0x7b,0xff,0x8b,0x15,0xf5,0x16,0x89,0x17,
++0xe5,0x14,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xe0,0xf5,0x1b,
++0xa3,0xe0,0xf5,0x1c,0x12,0x29,0xd9,0xff,0x7e,0x00,0xab,0x18,0xaa,0x19,0xa9,0x1a,
++0x12,0x42,0x97,0xfd,0xac,0xf0,0x12,0x29,0xf2,0xef,0x25,0x1c,0xf5,0x1c,0xee,0x35,
++0x1b,0xf5,0x1b,0xab,0x15,0xaa,0x16,0xa9,0x17,0x90,0x00,0x01,0x12,0x42,0x20,0xff,
++0x7e,0x00,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x90,0x00,0x02,0x12,0x42,0xc2,0xfd,0xac,
++0xf0,0x12,0x29,0xf2,0xef,0x25,0x1c,0xf5,0x1c,0xee,0x35,0x1b,0xf5,0x1b,0xab,0x15,
++0xaa,0x16,0xa9,0x17,0x90,0x00,0x02,0x12,0x42,0x20,0xff,0x7e,0x00,0xab,0x18,0xaa,
++0x19,0xa9,0x1a,0x90,0x00,0x04,0x12,0x42,0xc2,0xfd,0xac,0xf0,0x12,0x29,0xf2,0xef,
++0x25,0x1c,0xf5,0x1c,0xee,0x35,0x1b,0xf5,0x1b,0xab,0x15,0xaa,0x16,0xa9,0x17,0x90,
++0x00,0x03,0x12,0x42,0x20,0xff,0x7e,0x00,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x90,0x00,
++0x06,0x12,0x42,0xc2,0xfd,0xac,0xf0,0x12,0x29,0xf2,0xef,0x25,0x1c,0xf5,0x1c,0xee,
++0x35,0x1b,0xf5,0x1b,0xab,0x15,0xaa,0x16,0xa9,0x17,0x90,0x00,0x04,0x12,0x42,0x20,
++0xff,0x7e,0x00,0xab,0x18,0xaa,0x19,0xa9,0x1a,0x90,0x00,0x08,0x12,0x42,0xc2,0xfd,
++0xac,0xf0,0x12,0x29,0xf2,0xef,0x25,0x1c,0xf5,0x1c,0xee,0x35,0x1b,0xf5,0x1b,0xab,
++0x15,0xaa,0x16,0xa9,0x17,0x90,0x00,0x05,0x12,0x42,0x20,0xff,0x7e,0x00,0x90,0x9e,
++0x1b,0xe0,0xfc,0xa3,0xe0,0xfd,0x12,0x29,0xf2,0xd3,0xe5,0x1c,0x9f,0xe5,0x1b,0x9e,
++0x40,0x0c,0xe5,0x1c,0x9f,0xf5,0x1c,0xe5,0x1b,0x9e,0xf5,0x1b,0x80,0x05,0xe4,0xf5,
++0x1b,0xf5,0x1c,0xe5,0x14,0x25,0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,
++0xe5,0x1b,0xf0,0xa3,0xe5,0x1c,0xf0,0x90,0x9e,0x19,0xe0,0x25,0xe0,0x24,0x66,0xf5,
++0x82,0xe4,0x34,0x41,0xf5,0x83,0xc3,0x74,0x01,0x93,0x95,0x1c,0xe4,0x93,0x95,0x1b,
++0x50,0x07,0xaf,0x14,0x12,0x65,0x5c,0xa1,0x31,0x90,0x9e,0x19,0xe0,0x25,0xe0,0x24,
++0x9e,0xf5,0x82,0xe4,0x34,0x41,0xf5,0x83,0xd3,0x74,0x01,0x93,0x95,0x1c,0xe4,0x93,
++0x95,0x1b,0x50,0x02,0xa1,0x31,0x7d,0x01,0xaf,0x14,0x12,0x63,0xbd,0xa1,0x31,0x74,
++0xe6,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0xfc,0x64,0x05,0x60,0x02,
++0x81,0x3a,0x90,0x96,0x43,0xe0,0xff,0xb4,0x03,0x0b,0x90,0x9e,0x1a,0xe0,0xc3,0x94,
++0x19,0x40,0x3d,0x80,0x2e,0xef,0xb4,0x02,0x0b,0x90,0x9e,0x1a,0xe0,0xc3,0x94,0x11,
++0x40,0x2e,0x80,0x1f,0x90,0x96,0x43,0xe0,0xff,0xb4,0x01,0x0b,0x90,0x9e,0x1a,0xe0,
++0xc3,0x94,0x0a,0x40,0x1b,0x80,0x0c,0xef,0x70,0x11,0x90,0x9e,0x1a,0xe0,0xc3,0x94,
++0x03,0x40,0x0d,0x90,0x9a,0x84,0x74,0x01,0xf0,0x80,0x05,0xe4,0x90,0x9a,0x84,0xf0,
++0x74,0x84,0x25,0x14,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe0,0xf5,0x1e,0x74,0x44,
++0x25,0x14,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xff,0xc3,0x94,0x30,0x50,0x02,
++0x61,0xe7,0x90,0x9a,0x84,0xe0,0x64,0x01,0x60,0x02,0x61,0xe7,0x74,0x85,0x25,0x14,
++0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0x64,0x0a,0x60,0x51,0xef,0x24,0x05,0xff,
++0xe4,0x33,0xfe,0x74,0x41,0x25,0x14,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83,0xe0,0xfd,
++0xd3,0x9f,0xee,0x64,0x80,0xf8,0x74,0x80,0x98,0x50,0x32,0xed,0x24,0x05,0xff,0xe4,
++0x33,0xfe,0x74,0x44,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xd3,0x9f,
++0xee,0x64,0x80,0xf8,0x74,0x80,0x98,0x50,0x14,0x74,0x26,0x25,0x14,0xf5,0x82,0xe4,
++0x34,0x9d,0xf5,0x83,0xe0,0xff,0x90,0x9e,0x1a,0xe0,0x6f,0x60,0x3d,0x74,0x44,0x25,
++0x14,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xff,0xd3,0x94,0x42,0x40,0x05,0x75,
++0x1e,0x05,0x80,0x0e,0xef,0xd3,0x94,0x39,0x40,0x05,0x75,0x1e,0x03,0x80,0x03,0x75,
++0x1e,0x01,0x74,0x41,0x25,0x14,0xf5,0x82,0xe4,0x34,0x94,0xf5,0x83,0xef,0xf0,0x74,
++0x85,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9a,0x80,0x29,0x74,0xe6,0x25,0x14,0xf5,0x82,
++0xe4,0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x74,0x85,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9a,
++0xf5,0x83,0xe0,0x04,0xf0,0x80,0x10,0xe4,0xf5,0x1e,0x74,0xe6,0x25,0x14,0xf5,0x82,
++0xe4,0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x90,0x9e,0x1a,0xe0,0xff,0x74,0x26,0x25,0x14,
++0xf5,0x82,0xe4,0x34,0x9d,0xf5,0x83,0xef,0xf0,0x74,0x84,0x25,0x14,0xf5,0x82,0xe4,
++0x34,0x98,0xf5,0x83,0xe5,0x1e,0xf0,0x75,0xf0,0x09,0xe5,0x14,0x90,0x96,0x4c,0x12,
++0x43,0x5f,0xe0,0xb4,0x01,0x10,0xe4,0xf5,0x1e,0x74,0xe6,0x25,0x14,0xf5,0x82,0xe4,
++0x34,0x9c,0xf5,0x83,0xe4,0xf0,0xad,0x1e,0xa1,0x2c,0xec,0x64,0x06,0x60,0x02,0xa1,
++0x31,0xf5,0x1b,0xf5,0x1c,0x90,0x42,0x13,0x93,0xff,0x7e,0x00,0x90,0x9e,0x1b,0xe0,
++0xfc,0xa3,0xe0,0xfd,0x12,0x29,0xf2,0x90,0x9e,0x21,0xee,0xf0,0xa3,0xef,0xf0,0x74,
++0x84,0x25,0x14,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe0,0xf5,0x1e,0xe4,0xf5,0x1d,
++0xab,0x18,0xaa,0x19,0xa9,0x1a,0x75,0xf0,0x02,0xe5,0x1d,0xa4,0xf5,0x82,0x85,0xf0,
++0x83,0x12,0x42,0xc2,0xfd,0xac,0xf0,0xe5,0x1d,0x90,0x42,0x0e,0x93,0xff,0x7e,0x00,
++0x12,0x29,0xf2,0xef,0x25,0x1c,0xf5,0x1c,0xee,0x35,0x1b,0xf5,0x1b,0xc3,0x90,0x9e,
++0x22,0xe0,0x95,0x1c,0x90,0x9e,0x21,0xe0,0x95,0x1b,0x40,0x07,0x05,0x1d,0xe5,0x1d,
++0xb4,0x05,0xbd,0xe5,0x1d,0xc3,0x13,0xf5,0x1d,0xe5,0x1e,0xb4,0x01,0x06,0xe5,0x1d,
++0x70,0x46,0x80,0x13,0xe5,0x1e,0xb4,0x03,0x15,0xe5,0x1d,0x70,0x05,0x75,0x1e,0x03,
++0x80,0x39,0xe5,0x1d,0xb4,0x01,0x05,0x75,0x1e,0x01,0x80,0x2f,0x80,0x2a,0xe5,0x1e,
++0xb4,0x05,0x28,0xe5,0x1d,0x70,0x05,0x75,0x1e,0x05,0x80,0x0d,0xe5,0x1d,0xb4,0x01,
++0x05,0x75,0x1e,0x03,0x80,0x03,0x75,0x1e,0x01,0xd3,0x90,0x9e,0x1e,0xe0,0x94,0x03,
++0x90,0x9e,0x1d,0xe0,0x94,0x00,0x40,0x03,0xe4,0xf5,0x1e,0xd3,0x90,0x9e,0x1e,0xe0,
++0x94,0x03,0x90,0x9e,0x1d,0xe0,0x94,0x00,0x40,0x03,0xe4,0xf5,0x1e,0x74,0x84,0x25,
++0x14,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe5,0x1e,0xf0,0xfd,0xaf,0x14,0x12,0x67,
++0x61,0x74,0xe6,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0xd3,0x94,0x05,
++0x74,0xe6,0x50,0x0e,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe0,0x04,0xf0,
++0x80,0x0b,0x25,0x14,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x90,0x9e,0x1d,
++0xe0,0xfe,0xa3,0xe0,0xff,0xc3,0x74,0xff,0x9f,0xfd,0x74,0xff,0x9e,0xfc,0xe5,0x14,
++0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xfa,0xa3,0xe0,0xd3,
++0x9d,0xea,0x9c,0xe5,0x14,0x50,0x13,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9a,
++0xf5,0x83,0xee,0x8f,0xf0,0x12,0x42,0x81,0x80,0x10,0x25,0xe0,0x24,0xc6,0xf5,0x82,
++0xe4,0x34,0x9a,0xf5,0x83,0x74,0xff,0xf0,0xa3,0xf0,0xe5,0x14,0x25,0xe0,0x24,0x44,
++0xf5,0x82,0xe4,0x34,0x99,0xf5,0x83,0xe0,0xfe,0xa3,0xe0,0xff,0xc3,0x74,0xff,0x9f,
++0xfd,0x74,0xff,0x9e,0xfc,0xe5,0x14,0x25,0xe0,0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b,
++0xf5,0x83,0xe0,0xfa,0xa3,0xe0,0xd3,0x9d,0xea,0x9c,0xe5,0x14,0x50,0x13,0x25,0xe0,
++0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xee,0x8f,0xf0,0x12,0x42,0x81,0x80,
++0x10,0x25,0xe0,0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0x74,0xff,0xf0,0xa3,
++0xf0,0xab,0x18,0xaa,0x19,0xa9,0x1a,0xe4,0xf5,0xf0,0x12,0x42,0xfa,0xab,0x18,0xaa,
++0x19,0xa9,0x1a,0x90,0x00,0x02,0xe4,0xf5,0xf0,0x12,0x43,0x19,0x90,0x00,0x04,0xe4,
++0xf5,0xf0,0x12,0x43,0x19,0x90,0x00,0x06,0xe4,0xf5,0xf0,0x12,0x43,0x19,0x90,0x00,
++0x08,0xe4,0xf5,0xf0,0x12,0x43,0x19,0xe5,0x14,0x25,0xe0,0x24,0x80,0xf5,0x82,0xe4,
++0x34,0x93,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,0xe5,0x14,0x25,0xe0,0x24,0xc4,0xf5,0x82,
++0xe4,0x34,0x98,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,0xe5,0x14,0x25,0xe0,0x24,0x44,0xf5,
++0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,0x05,0x14,0xe5,0x14,0xc3,0x94,
++0x40,0x50,0x03,0x02,0x67,0xa4,0x22,0x90,0x04,0x44,0x74,0x11,0xf0,0xa3,0x74,0xf0,
++0xf0,0xa3,0x74,0x0f,0xf0,0xa3,0xe4,0xf0,0xfd,0x74,0xa4,0x2d,0xf5,0x82,0xe4,0x34,
++0x04,0xf5,0x83,0xe4,0xf0,0x0d,0xbd,0x10,0xf0,0xe4,0x90,0x9a,0xc5,0xf0,0x90,0x95,
++0x01,0x04,0xf0,0xe4,0xfd,0x75,0xf0,0x0a,0xed,0x90,0x90,0x00,0x12,0x43,0x5f,0xe4,
++0xf0,0xa3,0xf0,0x75,0xf0,0x0a,0xed,0x90,0x90,0x02,0x12,0x43,0x5f,0xe4,0xf0,0xa3,
++0xf0,0x75,0xf0,0x0a,0xed,0x90,0x90,0x04,0x12,0x43,0x5f,0xe4,0xf0,0xa3,0xf0,0x75,
++0xf0,0x0a,0xed,0x90,0x90,0x06,0x12,0x43,0x5f,0xe4,0xf0,0xa3,0xf0,0x75,0xf0,0x0a,
++0xed,0x90,0x90,0x08,0x12,0x43,0x5f,0xe4,0xf0,0xa3,0xf0,0x74,0x26,0x2d,0xf5,0x82,
++0xe4,0x34,0x9d,0xf5,0x83,0x74,0x13,0xf0,0x74,0x85,0x2d,0xf5,0x82,0xe4,0x34,0x9a,
++0xf5,0x83,0xe4,0xf0,0x74,0x84,0x2d,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe4,0xf0,
++0xed,0x25,0xe0,0x24,0x80,0xf5,0x82,0xe4,0x34,0x93,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,
++0xed,0x25,0xe0,0x24,0xc4,0xf5,0x82,0xe4,0x34,0x98,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,
++0xed,0x25,0xe0,0x24,0xc4,0xf5,0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,
++0xed,0x25,0xe0,0x24,0x44,0xf5,0x82,0xe4,0x34,0x99,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,
++0xed,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,
++0xed,0x25,0xe0,0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe4,0xf0,0xa3,0xf0,
++0x74,0x86,0x2d,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x74,0x46,0x2d,0xf5,
++0x82,0xe4,0x34,0x9c,0xf5,0x83,0xe4,0xf0,0x74,0xe6,0x2d,0xf5,0x82,0xe4,0x34,0x9c,
++0xf5,0x83,0xe4,0xf0,0x90,0x41,0xc4,0x93,0xfe,0x74,0x01,0x93,0xff,0x90,0x41,0x8c,
++0x74,0x01,0x93,0x2f,0xff,0xe4,0x93,0x3e,0xc3,0x13,0xfe,0xef,0x13,0xff,0xed,0x25,
++0xe0,0x24,0xc2,0xf5,0x82,0xe4,0x34,0x95,0xf5,0x83,0xee,0xf0,0xa3,0xef,0xf0,0x75,
++0xf0,0x09,0xed,0x90,0x96,0x4b,0x12,0x43,0x5f,0x74,0x01,0xf0,0x75,0xf0,0x09,0xed,
++0x90,0x96,0x4a,0x12,0x43,0x5f,0x74,0x01,0xf0,0x74,0x82,0x2d,0xf5,0x82,0xe4,0x34,
++0x95,0xf5,0x83,0x74,0x0c,0xf0,0x75,0xf0,0x09,0xed,0x90,0x96,0x46,0x12,0x43,0x5f,
++0x74,0xff,0xf0,0xa3,0xf0,0x75,0xf0,0x09,0xed,0x90,0x96,0x44,0x12,0x43,0x5f,0xe4,
++0xf0,0xa3,0x74,0x0f,0xf0,0x75,0xf0,0x09,0xed,0x90,0x96,0x48,0x12,0x43,0x5f,0x74,
++0x13,0xf0,0x75,0xf0,0x09,0xed,0x90,0x96,0x49,0x12,0x43,0x5f,0xe4,0xf0,0xed,0xc3,
++0x94,0x20,0x50,0x0f,0x74,0x84,0x2d,0xf5,0x82,0xe4,0x34,0x04,0xf5,0x83,0x74,0x13,
++0xf0,0x80,0x0d,0x74,0xa6,0x2d,0xf5,0x82,0xe4,0x34,0x9c,0xf5,0x83,0x74,0x13,0xf0,
++0x0d,0xed,0x64,0x40,0x60,0x03,0x02,0x6e,0xa5,0x22,0x12,0x29,0xd9,0xf5,0x14,0xc3,
++0x94,0x40,0x50,0x15,0x90,0x00,0x02,0x12,0x42,0x20,0xff,0x74,0x44,0x25,0x14,0xf5,
++0x82,0xe4,0x34,0x9a,0xf5,0x83,0xef,0xf0,0x22,0xe5,0x14,0xb4,0x40,0x0a,0x90,0x00,
++0x02,0x12,0x42,0x20,0x90,0x96,0x42,0xf0,0x22,0x90,0x9e,0x30,0x12,0x43,0x8b,0x90,
++0x9e,0x33,0xe0,0x54,0xf0,0x44,0x02,0xf0,0x54,0x0f,0x44,0xc0,0xf0,0x90,0x9e,0x30,
++0x12,0x43,0x6b,0x90,0x9e,0x90,0x12,0x43,0x8b,0x7b,0x01,0x7a,0x9e,0x79,0x33,0x02,
++0x53,0xf1,0x90,0x00,0x02,0x12,0x42,0x20,0xfd,0x90,0x00,0x01,0x12,0x42,0x20,0xfc,
++0xed,0xc3,0x94,0x40,0x40,0x02,0xe4,0xfd,0xec,0xc3,0x94,0x40,0x40,0x02,0xe4,0xfc,
++0xed,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xfa,0xa3,0xe0,
++0xfb,0xea,0x90,0x9e,0x24,0xf0,0xeb,0xa3,0xf0,0xed,0x25,0xe0,0x24,0x46,0xf5,0x82,
++0xe4,0x34,0x9b,0xf5,0x83,0xe0,0xfa,0xa3,0xe0,0xfb,0xea,0x90,0x9e,0x26,0xf0,0xeb,
++0xa3,0xf0,0xa3,0xed,0xf0,0xa3,0x74,0xff,0xf0,0xec,0x25,0xe0,0x24,0xc6,0xf5,0x82,
++0xe4,0x34,0x9a,0xf5,0x83,0xe0,0xfa,0xa3,0xe0,0xfb,0xea,0x90,0x9e,0x2a,0xf0,0xeb,
++0xa3,0xf0,0xec,0x25,0xe0,0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe0,0xfa,
++0xa3,0xe0,0xfb,0xea,0x90,0x9e,0x2c,0xf0,0xeb,0xa3,0xf0,0xa3,0xec,0xf0,0xa3,0x74,
++0xff,0xf0,0xed,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe4,0xf0,
++0xa3,0xf0,0xed,0x25,0xe0,0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe4,0xf0,
++0xa3,0xf0,0xec,0x25,0xe0,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x9a,0xf5,0x83,0xe4,0xf0,
++0xa3,0xf0,0xec,0x25,0xe0,0x24,0x46,0xf5,0x82,0xe4,0x34,0x9b,0xf5,0x83,0xe4,0xf0,
++0xa3,0xf0,0x7b,0x01,0x7a,0x9e,0x79,0x24,0x01,0x79,0xd3,0x10,0xaf,0x01,0xc3,0xc0,
++0xd0,0x90,0x9e,0xa4,0xee,0xf0,0xa3,0xef,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0x90,0x9e,
++0xa4,0xe0,0xfe,0xa3,0xe0,0xf5,0x82,0x8e,0x83,0xe0,0x60,0x2d,0xc3,0x90,0x9e,0xa7,
++0xe0,0x94,0xe8,0x90,0x9e,0xa6,0xe0,0x94,0x03,0x40,0x0b,0x90,0x01,0xc6,0xe0,0x44,
++0x10,0xf0,0x7f,0x00,0x80,0x15,0x90,0x9e,0xa6,0xe4,0x75,0xf0,0x01,0x12,0x42,0x81,
++0x7f,0x0a,0x7e,0x00,0x12,0x37,0x54,0x80,0xc5,0x7f,0x01,0xd0,0xd0,0x92,0xaf,0x22,
++0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x24,0x12,0x2a,0x8b,0x00,0x00,0x00,
++0x00,0x90,0x00,0x01,0x12,0x42,0x20,0x90,0x9e,0x66,0xf0,0x90,0x00,0x03,0x12,0x42,
++0x20,0x90,0x9e,0x55,0xf0,0x12,0x56,0x22,0x90,0x01,0xe5,0xe5,0x63,0xf0,0x90,0x9e,
++0x66,0xe0,0x90,0x01,0xe6,0xf0,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x00,0x02,0x12,0x42,
++0x20,0xff,0x30,0xe0,0x25,0x12,0x29,0xd9,0x90,0x9e,0x5c,0xf0,0x90,0x00,0x01,0x12,
++0x42,0x20,0x90,0x9e,0x5d,0xf0,0xef,0xc3,0x13,0x54,0x7f,0x90,0x9e,0x5b,0xf0,0x90,
++0x00,0x03,0x12,0x42,0x20,0x90,0x9e,0x62,0xf0,0x22,0x90,0x9e,0x5c,0x74,0x0a,0xf0,
++0x90,0x9e,0x5d,0x74,0x05,0xf0,0x90,0x9e,0x5b,0x74,0x14,0xf0,0x90,0x9e,0x62,0x74,
++0x05,0xf0,0x22,0x12,0x29,0xd9,0x30,0xe0,0x19,0xc3,0x13,0x54,0x7f,0x90,0x9e,0x61,
++0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0xff,0x90,0x9e,0x5f,0xe4,0xf0,0xa3,0xef,0xf0,
++0x80,0x0f,0x90,0x9e,0x61,0x74,0x07,0xf0,0x90,0x9e,0x5f,0xe4,0xf0,0xa3,0x74,0x03,
++0xf0,0x90,0x9e,0x5f,0xe0,0xa3,0xe0,0x90,0x05,0x58,0xf0,0x22,0x90,0x9e,0x24,0x12,
++0x2a,0x8b,0x00,0x00,0x00,0x00,0x12,0x29,0xd9,0x60,0x0d,0x90,0x9e,0x5e,0xf0,0xe4,
++0xfd,0x7f,0x04,0x12,0x54,0xe7,0x80,0x05,0xe4,0x90,0x9e,0x5e,0xf0,0x90,0x9e,0x5e,
++0xe0,0x90,0x01,0xe7,0xf0,0x22,0x90,0x02,0x09,0xe0,0xfd,0x12,0x29,0xd9,0xfe,0xaf,
++0x05,0xed,0x2e,0x90,0x9e,0x78,0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0xff,0xed,0x2f,
++0x90,0x9e,0x79,0xf0,0x90,0x00,0x02,0x12,0x42,0x20,0xff,0xed,0x2f,0x90,0x9e,0x7a,
++0xf0,0x90,0x00,0x03,0x12,0x42,0x20,0xff,0xed,0x2f,0x90,0x9e,0x7b,0xf0,0x90,0x00,
++0x04,0x12,0x42,0x20,0xff,0xae,0x05,0xed,0x2f,0x90,0x9e,0x7c,0xf0,0x22,0xd3,0x10,
++0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x9e,0x24,0x12,0x43,0x8b,0x90,0x9e,0x24,0x12,0x43,
++0x6b,0x90,0x00,0x01,0x12,0x42,0xc2,0xfa,0xe5,0xf0,0x24,0x00,0xff,0xe4,0x3a,0xfe,
++0x90,0x9e,0x24,0x12,0x43,0x6b,0x90,0x00,0x01,0xee,0x8f,0xf0,0x12,0x43,0x19,0x12,
++0x29,0xd9,0xff,0x60,0x2d,0xb5,0x65,0x16,0x90,0x9e,0x24,0x12,0x43,0x6b,0x90,0x00,
++0x01,0x12,0x42,0xc2,0x65,0x67,0x70,0x04,0xe5,0x66,0x65,0xf0,0x60,0x24,0x90,0x9e,
++0x24,0x12,0x43,0x6b,0x90,0x00,0x01,0x12,0x42,0xc2,0xff,0xae,0xf0,0x12,0x4e,0x37,
++0x80,0x10,0x90,0x9e,0x24,0x12,0x43,0x6b,0x12,0x29,0xd9,0x65,0x65,0x60,0x03,0x12,
++0x44,0xc2,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x06,0x34,0x74,0xff,0xf0,0xe4,0xa3,0xf0,
++0xa3,0xf0,0xa3,0xf0,0x22,0x90,0x06,0x34,0xe0,0x60,0x24,0x14,0x70,0x1a,0x7b,0x01,
++0x7a,0x06,0x79,0x35,0x7f,0xf9,0x7e,0x01,0x71,0xb0,0xbf,0x01,0x09,0x90,0x06,0x35,
++0xe0,0x54,0x0f,0xf0,0x80,0x04,0x80,0x00,0x80,0xcd,0xe4,0x90,0x06,0x34,0xf0,0x22,
++0x8e,0x14,0x8f,0x15,0x8b,0x16,0x8a,0x17,0x89,0x18,0xe4,0x90,0x9e,0x19,0xf0,0xef,
++0x90,0x00,0x31,0xf0,0x12,0x4d,0x45,0xe5,0x14,0x54,0x03,0xff,0x90,0x00,0x32,0xe0,
++0x54,0xfc,0x4f,0xf0,0x12,0x4d,0x45,0x90,0x00,0x33,0xe0,0x54,0x7f,0xf0,0x12,0x4d,
++0x45,0x90,0x00,0x33,0xe0,0x20,0xe7,0x0e,0x90,0x9e,0x19,0xe0,0xc3,0x94,0x64,0x50,
++0x05,0xe0,0x04,0xf0,0x80,0xeb,0x90,0x9e,0x19,0xe0,0xc3,0x94,0x64,0x50,0x10,0x90,
++0x00,0x30,0xe0,0xab,0x16,0xaa,0x17,0xa9,0x18,0x12,0x42,0x4d,0x7f,0x01,0x22,0x7f,
++0x00,0x22,0xe4,0x90,0x9e,0xac,0xf0,0xa3,0xf0,0x90,0x05,0xf8,0xe0,0x70,0x0f,0xa3,
++0xe0,0x70,0x0b,0xa3,0xe0,0x70,0x07,0xa3,0xe0,0x70,0x03,0x7f,0x01,0x22,0xd3,0x90,
++0x9e,0xad,0xe0,0x94,0xe8,0x90,0x9e,0xac,0xe0,0x94,0x03,0x40,0x03,0x7f,0x00,0x22,
++0x7f,0x32,0x7e,0x00,0x12,0x37,0x54,0x90,0x9e,0xac,0xe4,0x75,0xf0,0x01,0x12,0x42,
++0x81,0x80,0xc6,0x90,0x9d,0xff,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,
++0x78,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x9e,0x03,0x12,0x43,0x53,0x90,0x80,0x85,0x12,
++0x2a,0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x2f,0xd9,0x90,0x9e,0x07,0x12,0x43,0x53,0x90,
++0x80,0x85,0x12,0x2a,0x7f,0x7f,0x00,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x9e,0x0b,0x12,
++0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x70,0x7e,0x0e,0x12,0x2f,0xd9,0x90,
++0x80,0x59,0x12,0x2a,0x8b,0x00,0x03,0x2d,0x95,0xe4,0xfd,0xff,0x12,0x34,0x81,0x90,
++0x9e,0x80,0xe0,0xb4,0x01,0x11,0x90,0x80,0x59,0x12,0x2a,0x8b,0x00,0x03,0x2d,0x95,
++0xe4,0xfd,0x7f,0x01,0x12,0x34,0x81,0x22,0x7f,0x78,0x7e,0x08,0x12,0x27,0xde,0x90,
++0x9d,0xff,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x27,0xde,0x90,0x9e,0x03,0x12,
++0x2a,0x7f,0x7f,0x00,0x7e,0x08,0x12,0x27,0xde,0x90,0x9e,0x07,0x12,0x2a,0x7f,0x90,
++0x9e,0x80,0xe0,0x90,0x9d,0xff,0xb4,0x01,0x0d,0x12,0x43,0x53,0xef,0x54,0xc7,0xff,
++0xed,0x54,0xc7,0xfd,0x80,0x07,0x12,0x43,0x53,0xef,0x54,0xc7,0xff,0xec,0x90,0x80,
++0x85,0x12,0x2a,0x7f,0x7f,0x78,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x9e,0x03,0x12,0x43,
++0x53,0xef,0x54,0x0f,0xff,0xec,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0c,
++0x12,0x2f,0xd9,0x90,0x9e,0x07,0x12,0x43,0x53,0xef,0x44,0x02,0xff,0xec,0x90,0x80,
++0x85,0x12,0x2a,0x7f,0x7f,0x00,0x7e,0x08,0x12,0x2f,0xd9,0x7f,0x70,0x7e,0x0e,0x12,
++0x27,0xde,0x90,0x9e,0x0b,0x12,0x2a,0x7f,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x1b,
++0x25,0xa0,0x7f,0x70,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x59,0x12,0x2a,0x8b,0x00,
++0x00,0x00,0x00,0xe4,0xfd,0xff,0x12,0x34,0x81,0x90,0x9e,0x80,0xe0,0xb4,0x01,0x11,
++0x90,0x80,0x59,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe4,0xfd,0x7f,0x01,0x12,0x34,
++0x81,0x22,0xef,0x70,0x02,0xe1,0x49,0x90,0x9e,0x0f,0xe0,0x60,0x03,0x02,0x7b,0x15,
++0x90,0x9d,0xfb,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x8c,0x7e,0x08,
++0x12,0x2f,0xd9,0x90,0x9d,0xa7,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,
++0x44,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x9d,0xab,0x12,0x43,0x53,0x90,0x80,0x85,0x12,
++0x2a,0x7f,0x7f,0x5c,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x9d,0xaf,0x12,0x43,0x53,0x90,
++0x80,0x85,0x12,0x2a,0x7f,0x7f,0x6c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xb3,0x12,
++0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x70,0x7e,0x0e,0x12,0x2f,0xd9,0x90,
++0x9d,0xb7,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x74,0x7e,0x0e,0x12,
++0x2f,0xd9,0x90,0x9d,0xbb,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x78,
++0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xbf,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,
++0x7f,0x7f,0x7c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xc3,0x12,0x43,0x53,0x90,0x80,
++0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xc7,0x12,0x43,
++0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x84,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,
++0xcb,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x88,0x7e,0x0e,0x12,0x2f,
++0xd9,0x90,0x9d,0xcf,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x8c,0x7e,
++0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xd3,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,
++0x7f,0xd0,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xd7,0x12,0x43,0x53,0x90,0x80,0x85,
++0x12,0x2a,0x7f,0x7f,0xd4,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xdb,0x12,0x43,0x53,
++0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0xd8,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xdf,
++0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0xdc,0x7e,0x0e,0x12,0x2f,0xd9,
++0x90,0x9d,0xe3,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0xe0,0x7e,0x0e,
++0x12,0x2f,0xd9,0x90,0x9d,0xe7,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,
++0xec,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x9d,0xeb,0x12,0x43,0x53,0x90,0x80,0x85,0x12,
++0x2a,0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x2f,0xd9,0x90,0x9d,0xef,0x12,0x43,0x53,0x90,
++0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0d,0x12,0x2f,0xd9,0x90,0x9d,0xf3,0x12,
++0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x0c,0x7e,0x09,0x12,0x2f,0xd9,0x90,
++0x9d,0xf7,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x08,0x12,
++0x2f,0xd9,0x90,0x9e,0x0f,0x74,0x01,0xf0,0x22,0x90,0x9e,0x0f,0xe0,0x64,0x01,0x60,
++0x03,0x02,0x7b,0x15,0x7f,0x8c,0x7e,0x08,0x12,0x27,0xde,0x90,0x9d,0xfb,0x12,0x2a,
++0x7f,0x7f,0x44,0x7e,0x08,0x12,0x27,0xde,0x90,0x9d,0xa7,0x12,0x2a,0x7f,0x7f,0x5c,
++0x7e,0x08,0x12,0x27,0xde,0x90,0x9d,0xab,0x12,0x2a,0x7f,0x7f,0x6c,0x7e,0x0e,0x12,
++0x27,0xde,0x90,0x9d,0xaf,0x12,0x2a,0x7f,0x7f,0x70,0x7e,0x0e,0x12,0x27,0xde,0x90,
++0x9d,0xb3,0x12,0x2a,0x7f,0x7f,0x74,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xb7,0x12,
++0x2a,0x7f,0x7f,0x78,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xbb,0x12,0x2a,0x7f,0x7f,
++0x7c,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xbf,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x0e,
++0x12,0x27,0xde,0x90,0x9d,0xc3,0x12,0x2a,0x7f,0x7f,0x84,0x7e,0x0e,0x12,0x27,0xde,
++0x90,0x9d,0xc7,0x12,0x2a,0x7f,0x7f,0x88,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xcb,
++0x12,0x2a,0x7f,0x7f,0x8c,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xcf,0x12,0x2a,0x7f,
++0x7f,0xd0,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xd3,0x12,0x2a,0x7f,0x7f,0xd4,0x7e,
++0x0e,0x12,0x27,0xde,0x90,0x9d,0xd7,0x12,0x2a,0x7f,0x7f,0xd8,0x7e,0x0e,0x12,0x27,
++0xde,0x90,0x9d,0xdb,0x12,0x2a,0x7f,0x7f,0xdc,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,
++0xdf,0x12,0x2a,0x7f,0x7f,0xe0,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xe3,0x12,0x2a,
++0x7f,0x7f,0xec,0x7e,0x0e,0x12,0x27,0xde,0x90,0x9d,0xe7,0x12,0x2a,0x7f,0x7f,0x04,
++0x7e,0x0c,0x12,0x27,0xde,0x90,0x9d,0xeb,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0d,0x12,
++0x27,0xde,0x90,0x9d,0xef,0x12,0x2a,0x7f,0x7f,0x0c,0x7e,0x09,0x12,0x27,0xde,0x90,
++0x9d,0xf3,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x08,0x12,0x27,0xde,0x90,0x9d,0xf7,0x12,
++0x2a,0x7f,0x7f,0x8c,0x7e,0x08,0x12,0x27,0xde,0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90,
++0x9e,0xa8,0x12,0x43,0x53,0xed,0x44,0xc0,0xfd,0xec,0x90,0x9e,0xa8,0x12,0x2a,0x7f,
++0x90,0x9e,0xa8,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x8c,0x7e,0x08,
++0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x01,0x00,0x00,0x7f,0x44,0x7e,
++0x08,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0xdb,0x25,0xa4,0x7f,0x5c,
++0x7e,0x08,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,
++0x6c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,
++0x7f,0x70,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x04,0x1b,0x25,
++0xa4,0x7f,0x74,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x04,0x1b,
++0x25,0xa4,0x7f,0x78,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x04,
++0x1b,0x25,0xa4,0x7f,0x7c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,
++0x04,0x1b,0x25,0xa4,0x7f,0x80,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,
++0x8b,0x63,0xdb,0x25,0xa4,0x7f,0x84,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,
++0x2a,0x8b,0x04,0x1b,0x25,0xa4,0x7f,0x88,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,
++0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0x8c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,
++0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0xd0,0x7e,0x0e,0x12,0x2f,0xd9,0x90,
++0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0xd4,0x7e,0x0e,0x12,0x2f,0xd9,
++0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0xd8,0x7e,0x0e,0x12,0x2f,
++0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x1b,0x25,0xa4,0x7f,0xdc,0x7e,0x0e,0x12,
++0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x1b,0x25,0xa4,0x7f,0xe0,0x7e,0x0e,
++0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x24,0xdb,0x25,0xa4,0x7f,0xec,0x7e,
++0x0e,0x12,0x2f,0xd9,0x7f,0x04,0x7e,0x0c,0x12,0x27,0xde,0x90,0x9e,0xa8,0x12,0x2a,
++0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xe4,0xff,0xec,0x90,0x9e,0xa8,0x12,0x2a,0x7f,
++0x90,0x9e,0xa8,0x12,0x43,0x53,0xef,0x44,0x11,0xff,0xec,0x90,0x9e,0xa8,0x12,0x2a,
++0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,
++0x0c,0x12,0x2f,0xd9,0x7f,0x04,0x7e,0x0d,0x12,0x27,0xde,0x90,0x9e,0xa8,0x12,0x2a,
++0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xef,0x54,0xf0,0xff,0xec,0x90,0x9e,0xa8,0x12,
++0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xef,0x44,0x01,0xff,0xec,0x90,0x9e,0xa8,
++0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,
++0x04,0x7e,0x0d,0x12,0x2f,0xd9,0x7f,0x0c,0x7e,0x09,0x12,0x27,0xde,0x90,0x9e,0xa8,
++0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xe4,0xff,0xec,0x90,0x9e,0xa8,0x12,
++0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xef,0x44,0x11,0xff,0xec,0x90,0x9e,0xa8,
++0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,
++0x0c,0x7e,0x09,0x12,0x2f,0xd9,0x7f,0x0c,0x7e,0x09,0x12,0x27,0xde,0x90,0x9e,0xa8,
++0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xed,0x54,0x0f,0xfd,0xec,0x54,0xf0,
++0xfc,0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,0x53,0xed,0x44,0x10,
++0xfd,0xec,0x44,0x01,0xfc,0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,
++0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x0c,0x7e,0x09,0x12,0x2f,0xd9,0x7f,0x04,
++0x7e,0x08,0x12,0x27,0xde,0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,0x43,
++0x53,0xef,0x54,0xf0,0xff,0xec,0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,0x12,
++0x43,0x53,0xef,0x44,0x01,0xff,0xec,0x90,0x9e,0xa8,0x12,0x2a,0x7f,0x90,0x9e,0xa8,
++0x12,0x43,0x53,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x08,0x12,0x2f,0xd9,
++0xe4,0x90,0x9e,0x0f,0xf0,0x22,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x9e,0x43,0xf0,
++0xe0,0x60,0x04,0xe0,0xf4,0x70,0x21,0xa2,0xaf,0xe4,0x33,0xf5,0x14,0xc2,0xaf,0x90,
++0x00,0x47,0xe0,0x54,0xfb,0xfd,0x7f,0x47,0x12,0x49,0x05,0x7d,0x40,0x7f,0x01,0x12,
++0x36,0xaf,0xe5,0x14,0x24,0xff,0x92,0xaf,0x22,0x90,0x9e,0x3a,0xe0,0xc3,0x94,0x14,
++0x50,0x05,0xe0,0x04,0xf0,0x81,0x01,0x90,0x9e,0x3a,0xe0,0x64,0x14,0x60,0x02,0x81,
++0x01,0x90,0x9e,0x49,0xe0,0x70,0x25,0x90,0x9e,0x4c,0xe0,0x70,0x1f,0x90,0x9e,0x4a,
++0xe0,0x70,0x19,0x90,0x9e,0x4d,0xe0,0x70,0x13,0x90,0x9e,0x4b,0xe0,0x70,0x0d,0x90,
++0x9e,0x4e,0xe0,0x70,0x07,0x90,0x04,0xfd,0xe0,0x54,0xfe,0xf0,0x90,0x9e,0x49,0xe0,
++0x90,0x04,0x44,0xf0,0x90,0x9e,0x4a,0xe0,0x90,0x04,0x45,0xf0,0x90,0x9e,0x4b,0xe0,
++0x90,0x04,0x46,0xf0,0xa3,0xe4,0xf0,0x90,0x9e,0x4c,0xe0,0x90,0x04,0x48,0xf0,0x90,
++0x9e,0x4d,0xe0,0x90,0x04,0x49,0xf0,0x90,0x9e,0x4e,0xe0,0x90,0x04,0x4a,0xf0,0xa3,
++0xe4,0xf0,0x90,0x9e,0x35,0xe0,0x90,0x04,0x4c,0xf0,0x90,0x9e,0x36,0xe0,0x90,0x04,
++0x4d,0xf0,0x90,0x9e,0x37,0xe0,0x90,0x04,0x4e,0xf0,0x90,0x9e,0x38,0xe0,0x90,0x04,
++0x4f,0xf0,0xe4,0x90,0x9e,0x3a,0xf0,0x90,0x9e,0x35,0x04,0xf0,0xe4,0xa3,0xf0,0xa3,
++0xf0,0xa3,0xf0,0x90,0x9e,0x49,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,
++0xf0,0x90,0x05,0x60,0xe0,0x90,0x9e,0x19,0xf0,0x90,0x05,0x61,0xe0,0x90,0x9e,0x1a,
++0xf0,0x90,0x05,0x62,0xe0,0x90,0x9e,0x1b,0xf0,0x90,0x05,0x63,0xe0,0x90,0x9e,0x1c,
++0xf0,0x90,0x9e,0x52,0xe0,0xff,0x90,0x9e,0x1c,0xe0,0xfe,0xd3,0x9f,0x50,0x0b,0x90,
++0x9e,0x52,0xe0,0xc3,0x9e,0xd3,0x94,0x01,0x40,0x11,0x90,0x9e,0x40,0xe0,0xb4,0x01,
++0x02,0x80,0x03,0x90,0x9e,0x44,0xe0,0xff,0x12,0x4c,0xf0,0x22,0x90,0x9e,0x53,0xe0,
++0x64,0x01,0x60,0x08,0x90,0x9e,0x41,0xe0,0x60,0x02,0xa1,0x23,0x90,0x9e,0x35,0xe0,
++0xc3,0x94,0xff,0x50,0x05,0xe0,0x04,0xf0,0x80,0x3b,0x90,0x9e,0x36,0xe0,0xc3,0x94,
++0xff,0x50,0x06,0xe0,0x04,0xf0,0xe4,0x80,0x28,0x90,0x9e,0x37,0xe0,0xc3,0x94,0xff,
++0x50,0x0a,0xe0,0x04,0xf0,0xe4,0x90,0x9e,0x36,0xf0,0x80,0x15,0x90,0x9e,0x38,0xe0,
++0xc3,0x94,0xff,0x50,0x10,0xe0,0x04,0xf0,0xe4,0x90,0x9e,0x37,0xf0,0x90,0x9e,0x36,
++0xf0,0x90,0x9e,0x35,0xf0,0x90,0x00,0x44,0xe0,0x54,0x0c,0x60,0x76,0xe0,0x30,0xe2,
++0x32,0x90,0x9e,0x49,0xe0,0xc3,0x94,0xff,0x50,0x05,0xe0,0x04,0xf0,0x80,0x24,0x90,
++0x9e,0x4a,0xe0,0xc3,0x94,0xff,0x50,0x06,0xe0,0x04,0xf0,0xe4,0x80,0x11,0x90,0x9e,
++0x4b,0xe0,0xc3,0x94,0xff,0x50,0x0c,0xe0,0x04,0xf0,0xe4,0x90,0x9e,0x4a,0xf0,0x90,
++0x9e,0x49,0xf0,0x90,0x00,0x44,0xe0,0x30,0xe3,0x32,0x90,0x9e,0x4c,0xe0,0xc3,0x94,
++0xff,0x50,0x05,0xe0,0x04,0xf0,0x80,0x24,0x90,0x9e,0x4d,0xe0,0xc3,0x94,0xff,0x50,
++0x06,0xe0,0x04,0xf0,0xe4,0x80,0x11,0x90,0x9e,0x4e,0xe0,0xc3,0x94,0xff,0x50,0x0c,
++0xe0,0x04,0xf0,0xe4,0x90,0x9e,0x4d,0xf0,0x90,0x9e,0x4c,0xf0,0x90,0x04,0xfd,0xe0,
++0x44,0x01,0xf0,0x22,0x68,0x4c,};
++#else
++// =================== v88 TSMC P2PPS with CCX report C2H 2012-12-05 =======================
++u8 Rtl8192CUFwTSMCImgArray[TSMCImgArrayLength] = {
++0xC1, 0x88, 0x02, 0x05, 0x58, 0x00, 0x02, 0x00, 0x12, 0x05, 0x17, 0x12, 0xDE, 0x3E, 0x00, 0x00,
++0x94, 0x18, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0x02, 0x46, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0x00, 0x00, 0x00, 0x02, 0x60, 0xF2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0x00, 0x00, 0x00, 0x02, 0x68, 0x91, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x4B, 0x87, 0x00, 0x00,
++0x05, 0x04, 0x03, 0x02, 0x00, 0x03, 0x06, 0x05, 0x04, 0x03, 0x00, 0x04, 0x06, 0x05, 0x04, 0x02,
++0x00, 0x04, 0x08, 0x07, 0x06, 0x04, 0x00, 0x06, 0x0A, 0x09, 0x08, 0x06, 0x00, 0x08, 0x0A, 0x09,
++0x08, 0x04, 0x00, 0x08, 0x0A, 0x09, 0x08, 0x02, 0x00, 0x08, 0x0A, 0x09, 0x08, 0x00, 0x00, 0x08,
++0x12, 0x11, 0x10, 0x08, 0x00, 0x10, 0x1A, 0x19, 0x18, 0x10, 0x00, 0x18, 0x22, 0x21, 0x20, 0x18,
++0x00, 0x20, 0x22, 0x21, 0x20, 0x10, 0x00, 0x20, 0x22, 0x21, 0x20, 0x08, 0x00, 0x20, 0x22, 0x21,
++0x1C, 0x08, 0x00, 0x20, 0x22, 0x21, 0x14, 0x08, 0x00, 0x20, 0x22, 0x20, 0x18, 0x08, 0x00, 0x20,
++0x31, 0x30, 0x20, 0x10, 0x00, 0x30, 0x31, 0x30, 0x18, 0x00, 0x00, 0x30, 0x31, 0x2F, 0x10, 0x10,
++0x00, 0x30, 0x31, 0x2C, 0x10, 0x10, 0x00, 0x30, 0x31, 0x28, 0x10, 0x00, 0x00, 0x30, 0x31, 0x20,
++0x10, 0x00, 0x00, 0x30, 0x31, 0x10, 0x10, 0x00, 0x00, 0x30, 0x04, 0x04, 0x04, 0x05, 0x04, 0x04,
++0x05, 0x07, 0x07, 0x07, 0x08, 0x0A, 0x04, 0x04, 0x04, 0x04, 0x06, 0x0A, 0x0B, 0x0D, 0x05, 0x05,
++0x07, 0x07, 0x08, 0x0B, 0x0D, 0x0F, 0x04, 0x04, 0x04, 0x05, 0x07, 0x07, 0x09, 0x09, 0x0C, 0x0E,
++0x10, 0x12, 0x06, 0x07, 0x09, 0x0A, 0x0C, 0x0E, 0x11, 0x13, 0x09, 0x09, 0x09, 0x09, 0x0C, 0x0E,
++0x11, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x24, 0x26, 0x2A, 0x18, 0x1A,
++0x1D, 0x1F, 0x21, 0x27, 0x29, 0x2A, 0x00, 0x00, 0x00, 0x1F, 0x23, 0x28, 0x2A, 0x2C, 0x00, 0x04,
++0x00, 0x04, 0x00, 0x08, 0x00, 0x10, 0x00, 0x18, 0x00, 0x24, 0x00, 0x30, 0x00, 0x48, 0x00, 0x60,
++0x00, 0x90, 0x00, 0xC0, 0x00, 0xD8, 0x00, 0x50, 0x00, 0x78, 0x00, 0xA0, 0x00, 0xC8, 0x01, 0x40,
++0x01, 0x90, 0x01, 0xE0, 0x02, 0x30, 0x01, 0x2C, 0x01, 0x40, 0x01, 0xE0, 0x02, 0xD0, 0x03, 0xE8,
++0x04, 0xB0, 0x06, 0x40, 0x07, 0xD0, 0x00, 0x02, 0x00, 0x02, 0x00, 0x04, 0x00, 0x08, 0x00, 0x0C,
++0x00, 0x12, 0x00, 0x18, 0x00, 0x24, 0x00, 0x30, 0x00, 0x48, 0x00, 0x60, 0x00, 0x6C, 0x00, 0x28,
++0x00, 0x3C, 0x00, 0x50, 0x00, 0x64, 0x00, 0xA0, 0x00, 0xC8, 0x00, 0xF0, 0x01, 0x18, 0x00, 0x64,
++0x00, 0xA0, 0x00, 0xF0, 0x01, 0x68, 0x01, 0xF4, 0x02, 0x58, 0x03, 0x20, 0x03, 0xE8, 0x02, 0x02,
++0x02, 0x02, 0x02, 0x02, 0x03, 0x03, 0x04, 0x04, 0x05, 0x07, 0x02, 0x03, 0x04, 0x0A, 0x0C, 0x0E,
++0x10, 0x12, 0x05, 0x07, 0x07, 0x08, 0x0B, 0x12, 0x24, 0x3C, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02,
++0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x05, 0x06,
++0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x20, 0x1E, 0x1C, 0x18, 0x10, 0x18, 0x00, 0x00, 0x00, 0x00,
++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0xBB, 0x01, 0x0C, 0xE5, 0x82, 0x29, 0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE0, 0x22, 0x50,
++0x06, 0xE9, 0x25, 0x82, 0xF8, 0xE6, 0x22, 0xBB, 0xFE, 0x06, 0xE9, 0x25, 0x82, 0xF8, 0xE2, 0x22,
++0xE5, 0x82, 0x29, 0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE4, 0x93, 0x22, 0xBB, 0x01, 0x06,
++0x89, 0x82, 0x8A, 0x83, 0xF0, 0x22, 0x50, 0x02, 0xF7, 0x22, 0xBB, 0xFE, 0x01, 0xF3, 0x22, 0xF8,
++0xBB, 0x01, 0x0D, 0xE5, 0x82, 0x29, 0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE8, 0xF0, 0x22,
++0x50, 0x06, 0xE9, 0x25, 0x82, 0xC8, 0xF6, 0x22, 0xBB, 0xFE, 0x05, 0xE9, 0x25, 0x82, 0xC8, 0xF2,
++0x22, 0xC5, 0xF0, 0xF8, 0xA3, 0xE0, 0x28, 0xF0, 0xC5, 0xF0, 0xF8, 0xE5, 0x82, 0x15, 0x82, 0x70,
++0x02, 0x15, 0x83, 0xE0, 0x38, 0xF0, 0x22, 0xBB, 0x01, 0x0A, 0x89, 0x82, 0x8A, 0x83, 0xE0, 0xF5,
++0xF0, 0xA3, 0xE0, 0x22, 0x50, 0x06, 0x87, 0xF0, 0x09, 0xE7, 0x19, 0x22, 0xBB, 0xFE, 0x07, 0xE3,
++0xF5, 0xF0, 0x09, 0xE3, 0x19, 0x22, 0x89, 0x82, 0x8A, 0x83, 0xE4, 0x93, 0xF5, 0xF0, 0x74, 0x01,
++0x93, 0x22, 0xBB, 0x01, 0x10, 0xE5, 0x82, 0x29, 0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE0,
++0xF5, 0xF0, 0xA3, 0xE0, 0x22, 0x50, 0x09, 0xE9, 0x25, 0x82, 0xF8, 0x86, 0xF0, 0x08, 0xE6, 0x22,
++0xBB, 0xFE, 0x0A, 0xE9, 0x25, 0x82, 0xF8, 0xE2, 0xF5, 0xF0, 0x08, 0xE2, 0x22, 0xE5, 0x83, 0x2A,
++0xF5, 0x83, 0xE9, 0x93, 0xF5, 0xF0, 0xA3, 0xE9, 0x93, 0x22, 0xBB, 0x01, 0x0A, 0x89, 0x82, 0x8A,
++0x83, 0xF0, 0xE5, 0xF0, 0xA3, 0xF0, 0x22, 0x50, 0x06, 0xF7, 0x09, 0xA7, 0xF0, 0x19, 0x22, 0xBB,
++0xFE, 0x06, 0xF3, 0xE5, 0xF0, 0x09, 0xF3, 0x19, 0x22, 0xF8, 0xBB, 0x01, 0x11, 0xE5, 0x82, 0x29,
++0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE8, 0xF0, 0xE5, 0xF0, 0xA3, 0xF0, 0x22, 0x50, 0x09,
++0xE9, 0x25, 0x82, 0xC8, 0xF6, 0x08, 0xA6, 0xF0, 0x22, 0xBB, 0xFE, 0x09, 0xE9, 0x25, 0x82, 0xC8,
++0xF2, 0xE5, 0xF0, 0x08, 0xF2, 0x22, 0xEF, 0x4B, 0xFF, 0xEE, 0x4A, 0xFE, 0xED, 0x49, 0xFD, 0xEC,
++0x48, 0xFC, 0x22, 0xE0, 0xFC, 0xA3, 0xE0, 0xFD, 0xA3, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0x22, 0xA4,
++0x25, 0x82, 0xF5, 0x82, 0xE5, 0xF0, 0x35, 0x83, 0xF5, 0x83, 0x22, 0xE0, 0xFB, 0xA3, 0xE0, 0xFA,
++0xA3, 0xE0, 0xF9, 0x22, 0xF8, 0xE0, 0xFB, 0xA3, 0xA3, 0xE0, 0xF9, 0x25, 0xF0, 0xF0, 0xE5, 0x82,
++0x15, 0x82, 0x70, 0x02, 0x15, 0x83, 0xE0, 0xFA, 0x38, 0xF0, 0x22, 0xEB, 0xF0, 0xA3, 0xEA, 0xF0,
++0xA3, 0xE9, 0xF0, 0x22, 0xD0, 0x83, 0xD0, 0x82, 0xF8, 0xE4, 0x93, 0x70, 0x12, 0x74, 0x01, 0x93,
++0x70, 0x0D, 0xA3, 0xA3, 0x93, 0xF8, 0x74, 0x01, 0x93, 0xF5, 0x82, 0x88, 0x83, 0xE4, 0x73, 0x74,
++0x02, 0x93, 0x68, 0x60, 0xEF, 0xA3, 0xA3, 0xA3, 0x80, 0xDF, 0xD0, 0x83, 0xD0, 0x82, 0xF8, 0xE4,
++0x93, 0x70, 0x12, 0x74, 0x01, 0x93, 0x70, 0x0D, 0xA3, 0xA3, 0x93, 0xF8, 0x74, 0x01, 0x93, 0xF5,
++0x82, 0x88, 0x83, 0xE4, 0x73, 0x74, 0x02, 0x93, 0xB5, 0xF0, 0x06, 0x74, 0x03, 0x93, 0x68, 0x60,
++0xE9, 0xA3, 0xA3, 0xA3, 0xA3, 0x80, 0xD8, 0xE4, 0x90, 0x8A, 0xC5, 0xF0, 0xE5, 0x24, 0x70, 0x03,
++0x02, 0x44, 0x9D, 0xE5, 0x21, 0x64, 0x01, 0x60, 0x03, 0x02, 0x44, 0x9D, 0xE5, 0x24, 0x14, 0x60,
++0x29, 0x24, 0xFD, 0x60, 0x25, 0x24, 0x02, 0x24, 0xFB, 0x50, 0x02, 0x80, 0x23, 0x90, 0x8B, 0x0B,
++0xE0, 0x14, 0xF0, 0xE0, 0x60, 0x04, 0xA3, 0xE0, 0x60, 0x16, 0x90, 0x8B, 0x0B, 0xE0, 0x70, 0x0A,
++0x90, 0x8B, 0x19, 0xE0, 0x90, 0x8B, 0x0B, 0xF0, 0x80, 0x00, 0x90, 0x8A, 0xC5, 0x74, 0x01, 0xF0,
++0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x16, 0xA3, 0xE0, 0xB4, 0x06, 0x05, 0xE4, 0x90, 0x8A, 0xC5,
++0xF0, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x70, 0x04, 0x90, 0x8A, 0xC5, 0xF0, 0x90, 0x8A, 0xC5,
++0xE0, 0x60, 0x4A, 0x43, 0x25, 0x10, 0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x8B, 0x0C, 0xE0, 0x75,
++0xF0, 0x03, 0xA4, 0xFF, 0x90, 0x8B, 0x15, 0xE0, 0x2F, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB, 0xFD,
++0x7F, 0x54, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x57, 0x74, 0x05, 0xF0, 0xE5, 0x22, 0x54,
++0x0F, 0xC3, 0x94, 0x04, 0x50, 0x07, 0x7D, 0x01, 0x7F, 0x04, 0x12, 0x45, 0xA2, 0x90, 0x8B, 0x2C,
++0xE0, 0x30, 0xE0, 0x09, 0x12, 0x7D, 0xC1, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x22, 0xE4, 0xF5,
++0x25, 0xF5, 0x24, 0x75, 0x23, 0x0C, 0x75, 0x22, 0x0C, 0x90, 0x8B, 0x1A, 0xF0, 0x90, 0x8B, 0x18,
++0xF0, 0x90, 0x8B, 0x17, 0xF0, 0x90, 0x8B, 0x19, 0x04, 0xF0, 0x90, 0x8B, 0x0B, 0xF0, 0xE4, 0x90,
++0x8B, 0x1B, 0xF0, 0x90, 0x8B, 0x0D, 0xF0, 0x90, 0x8B, 0x15, 0x74, 0x05, 0xF0, 0xE4, 0x90, 0x8B,
++0x0C, 0xF0, 0x90, 0x8B, 0x13, 0xF0, 0xA3, 0x74, 0x03, 0xF0, 0x90, 0x8B, 0x10, 0xF0, 0xA3, 0x74,
++0x05, 0xF0, 0x90, 0x8B, 0x0F, 0x74, 0x14, 0xF0, 0x90, 0x8B, 0x16, 0x74, 0x05, 0xF0, 0xE4, 0x90,
++0x8B, 0x0E, 0xF0, 0x90, 0x8B, 0x0A, 0xF0, 0x90, 0x8B, 0x08, 0xF0, 0x90, 0x8B, 0x12, 0xF0, 0x22,
++0x7F, 0x00, 0x22, 0x02, 0x45, 0x03, 0x02, 0x45, 0x06, 0x8E, 0x64, 0x8F, 0x65, 0xAD, 0x65, 0xAC,
++0x64, 0xAF, 0x63, 0x12, 0x4A, 0x5B, 0xAF, 0x65, 0xAE, 0x64, 0x90, 0x04, 0x80, 0xE0, 0x54, 0x0F,
++0xFD, 0xAC, 0x07, 0x74, 0x11, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x01,
++0xF0, 0x74, 0x11, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x54, 0xFB, 0xF0, 0xAC,
++0x07, 0x74, 0x16, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0xFA, 0xF0, 0x74,
++0x15, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x1F, 0xF0, 0xAC, 0x07, 0x74,
++0x06, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x0F, 0xF0, 0x90, 0x04, 0x53,
++0xE4, 0xF0, 0x90, 0x04, 0x52, 0xF0, 0x90, 0x04, 0x51, 0x74, 0xFF, 0xF0, 0x90, 0x04, 0x50, 0x74,
++0xFD, 0xF0, 0x74, 0x14, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x54, 0xC0, 0x4D,
++0xFD, 0x74, 0x14, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xED, 0xF0, 0x22, 0x7D, 0x01,
++0x7F, 0x0C, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x8F, 0x67, 0x8D, 0x68, 0xE5, 0x67, 0x54,
++0x0F, 0xFF, 0xE5, 0x22, 0x54, 0x0F, 0x6F, 0x60, 0x72, 0xE5, 0x67, 0x30, 0xE2, 0x30, 0xE5, 0x22,
++0x20, 0xE2, 0x05, 0x7F, 0x01, 0x12, 0x4A, 0xB2, 0xE5, 0x22, 0x30, 0xE3, 0x10, 0xE5, 0x67, 0x20,
++0xE3, 0x0B, 0x12, 0x49, 0xD5, 0xEF, 0x60, 0x53, 0x12, 0x4A, 0xCC, 0x80, 0x4E, 0xE5, 0x22, 0x20,
++0xE3, 0x49, 0xE5, 0x67, 0x30, 0xE3, 0x44, 0xAF, 0x68, 0x12, 0x4A, 0x7C, 0x80, 0x3D, 0xE5, 0x22,
++0x54, 0x0F, 0xFF, 0xBF, 0x0C, 0x0E, 0xE5, 0x67, 0x20, 0xE3, 0x09, 0x12, 0x49, 0xD5, 0xEF, 0x60,
++0x2A, 0x12, 0x4A, 0xCC, 0xE5, 0x22, 0x54, 0x0F, 0xFF, 0xBF, 0x04, 0x0E, 0xE5, 0x67, 0x20, 0xE2,
++0x09, 0x12, 0x49, 0x93, 0xEF, 0x60, 0x14, 0x12, 0x4A, 0x32, 0xE5, 0x22, 0x54, 0x0F, 0xFF, 0xBF,
++0x02, 0x09, 0x12, 0x45, 0x00, 0xEF, 0x60, 0x03, 0x12, 0x4B, 0x10, 0xD0, 0xD0, 0x92, 0xAF, 0x22,
++0x02, 0x46, 0x6E, 0x02, 0x50, 0xC6, 0xE4, 0x93, 0xA3, 0xF8, 0xE4, 0x93, 0xA3, 0x40, 0x03, 0xF6,
++0x80, 0x01, 0xF2, 0x08, 0xDF, 0xF4, 0x80, 0x29, 0xE4, 0x93, 0xA3, 0xF8, 0x54, 0x07, 0x24, 0x0C,
++0xC8, 0xC3, 0x33, 0xC4, 0x54, 0x0F, 0x44, 0x20, 0xC8, 0x83, 0x40, 0x04, 0xF4, 0x56, 0x80, 0x01,
++0x46, 0xF6, 0xDF, 0xE4, 0x80, 0x0B, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x90, 0x4B,
++0x23, 0xE4, 0x7E, 0x01, 0x93, 0x60, 0xBC, 0xA3, 0xFF, 0x54, 0x3F, 0x30, 0xE5, 0x09, 0x54, 0x1F,
++0xFE, 0xE4, 0x93, 0xA3, 0x60, 0x01, 0x0E, 0xCF, 0x54, 0xC0, 0x25, 0xE0, 0x60, 0xA8, 0x40, 0xB8,
++0xE4, 0x93, 0xA3, 0xFA, 0xE4, 0x93, 0xA3, 0xF8, 0xE4, 0x93, 0xA3, 0xC8, 0xC5, 0x82, 0xC8, 0xCA,
++0xC5, 0x83, 0xCA, 0xF0, 0xA3, 0xC8, 0xC5, 0x82, 0xC8, 0xCA, 0xC5, 0x83, 0xCA, 0xDF, 0xE9, 0xDE,
++0xE7, 0x80, 0xBE, 0xE5, 0x21, 0x64, 0x01, 0x70, 0x67, 0xE5, 0x24, 0x60, 0x63, 0xE5, 0x24, 0x64,
++0x02, 0x60, 0x06, 0xE5, 0x24, 0x64, 0x05, 0x70, 0x27, 0x90, 0x06, 0xAB, 0xE0, 0x90, 0x8B, 0x0B,
++0xF0, 0x90, 0x06, 0xAA, 0xE0, 0x90, 0x8B, 0x19, 0xF0, 0x90, 0x8B, 0x0B, 0xE0, 0x70, 0x07, 0x90,
++0x8B, 0x19, 0xE0, 0xFF, 0x80, 0x05, 0x90, 0x8B, 0x0B, 0xE0, 0xFF, 0x90, 0x8B, 0x0B, 0xEF, 0xF0,
++0x90, 0x8B, 0x0D, 0xE0, 0x60, 0x02, 0xE4, 0xF0, 0xE4, 0x90, 0x8B, 0x0C, 0xF0, 0x90, 0x05, 0x58,
++0x74, 0x03, 0xF0, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x02, 0xF0, 0x53, 0x25,
++0xFD, 0x53, 0x25, 0xEF, 0xE5, 0x24, 0x14, 0x24, 0xFD, 0x50, 0x02, 0x80, 0x03, 0x12, 0x47, 0x8E,
++0x22, 0xEF, 0x64, 0x01, 0x70, 0x35, 0x7D, 0x78, 0x7F, 0x02, 0x12, 0x36, 0x75, 0x7D, 0x02, 0x7F,
++0x03, 0x12, 0x36, 0x75, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x02, 0xF0, 0x12,
++0x45, 0x9E, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x03, 0x12, 0x7D, 0xC1, 0x90, 0x06, 0x04, 0xE0,
++0x54, 0x7F, 0xF0, 0x90, 0x06, 0x0A, 0xE0, 0x54, 0xF8, 0xF0, 0x22, 0x90, 0x01, 0x36, 0x74, 0x7B,
++0xF0, 0xA3, 0x74, 0x02, 0xF0, 0x7D, 0x7B, 0xFF, 0x12, 0x36, 0xE6, 0x7D, 0x02, 0x7F, 0x03, 0x12,
++0x36, 0xE6, 0x90, 0x06, 0x04, 0xE0, 0x44, 0x80, 0xF0, 0x90, 0x06, 0x0A, 0xE0, 0x44, 0x07, 0xF0,
++0x12, 0x4B, 0x4F, 0xE5, 0x21, 0x20, 0xE0, 0x05, 0xE4, 0x90, 0x8B, 0x0D, 0xF0, 0x22, 0xE4, 0x90,
++0x8A, 0xC5, 0xF0, 0x90, 0x06, 0xA9, 0xE0, 0x90, 0x8A, 0xC5, 0xF0, 0xE0, 0x54, 0xC0, 0x70, 0x09,
++0x53, 0x25, 0xFE, 0x53, 0x25, 0xFD, 0x12, 0x4A, 0xFC, 0x90, 0x8A, 0xC5, 0xE0, 0x30, 0xE6, 0x15,
++0x43, 0x25, 0x01, 0x90, 0x8B, 0x1A, 0xE0, 0x64, 0x02, 0x60, 0x05, 0x12, 0x4A, 0x97, 0x80, 0x08,
++0x12, 0x49, 0x49, 0x80, 0x03, 0x53, 0x25, 0xFE, 0x90, 0x8A, 0xC5, 0xE0, 0x30, 0xE7, 0x27, 0x43,
++0x25, 0x02, 0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x8B, 0x11, 0xE0, 0x90, 0x8B, 0x3E, 0xF0, 0xE4,
++0xFB, 0xFD, 0x7F, 0x54, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x57, 0x74, 0x05, 0xF0, 0x90,
++0x8B, 0x1B, 0x74, 0x01, 0xF0, 0x22, 0x53, 0x25, 0xFD, 0x22, 0x90, 0x8A, 0xDE, 0x12, 0x43, 0x8B,
++0x12, 0x4B, 0x43, 0x90, 0x8A, 0xDE, 0x12, 0x43, 0x6B, 0x12, 0x29, 0xD9, 0xF5, 0x24, 0x14, 0x60,
++0x0E, 0x14, 0x60, 0x1F, 0x14, 0x60, 0x31, 0x24, 0x03, 0x70, 0x44, 0x7F, 0x01, 0x80, 0x3D, 0x90,
++0x8A, 0xDE, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFD, 0xE4, 0xFF, 0x12, 0x4A,
++0x07, 0x80, 0x29, 0x90, 0x8A, 0xDE, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFD,
++0x7F, 0x01, 0x12, 0x4A, 0x07, 0x1F, 0x80, 0x14, 0x90, 0x8A, 0xDE, 0x12, 0x43, 0x6B, 0x90, 0x00,
++0x02, 0x12, 0x42, 0x20, 0xFD, 0x7F, 0x02, 0x12, 0x4A, 0x07, 0xE4, 0xFF, 0x12, 0x47, 0x21, 0x22,
++0xE4, 0x90, 0x8A, 0xCB, 0xF0, 0xE5, 0x24, 0x60, 0x49, 0x90, 0x8B, 0x1B, 0xE0, 0x60, 0x0D, 0xE4,
++0xF0, 0x53, 0x25, 0xFD, 0xE5, 0x25, 0x54, 0x07, 0x70, 0x38, 0x80, 0x33, 0x90, 0x8B, 0x0C, 0xE0,
++0x04, 0xF0, 0x53, 0x25, 0xEF, 0x90, 0x8A, 0xCB, 0xE0, 0xFF, 0x90, 0x8B, 0x10, 0xE0, 0x2F, 0xFF,
++0xE4, 0x33, 0xFE, 0x90, 0x8B, 0x0C, 0xE0, 0xD3, 0x9F, 0xEE, 0x64, 0x80, 0xF8, 0x74, 0x80, 0x98,
++0x40, 0x0D, 0xE5, 0x21, 0xB4, 0x01, 0x0B, 0xA3, 0xE0, 0x70, 0x07, 0xE0, 0x04, 0xF0, 0x22, 0x12,
++0x4A, 0xFC, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x8F, 0x63, 0x90, 0x04, 0x1D, 0xE0,
++0x60, 0x24, 0x90, 0x05, 0x22, 0xE0, 0xF5, 0x66, 0x74, 0xFF, 0xF0, 0x12, 0x7E, 0x9A, 0xBF, 0x01,
++0x0D, 0x90, 0x8A, 0xF9, 0xE0, 0xFF, 0x7D, 0x01, 0x12, 0x5F, 0xFD, 0x12, 0x45, 0x09, 0x90, 0x05,
++0x22, 0xE5, 0x66, 0xF0, 0x80, 0x0D, 0x90, 0x8A, 0xF9, 0xE0, 0xFF, 0x7D, 0x01, 0x12, 0x5F, 0xFD,
++0x12, 0x45, 0x09, 0x90, 0x04, 0x1F, 0x74, 0x20, 0xF0, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xE5, 0x24,
++0x14, 0x24, 0xFD, 0x50, 0x02, 0x80, 0x41, 0x90, 0x8B, 0x1A, 0xE0, 0x60, 0x2B, 0x12, 0x45, 0x9E,
++0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x8B, 0x0F, 0xE0, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB, 0xFD,
++0x7F, 0x58, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x5B, 0x74, 0x05, 0xF0, 0x90, 0x06, 0x92,
++0x74, 0x01, 0xF0, 0x90, 0x8B, 0x18, 0xF0, 0x22, 0xE5, 0x22, 0x54, 0x0F, 0xC3, 0x94, 0x04, 0x50,
++0x07, 0x7D, 0x01, 0x7F, 0x04, 0x12, 0x45, 0xA2, 0x22, 0x90, 0x01, 0x5F, 0xE4, 0xF0, 0x90, 0x01,
++0x3C, 0x74, 0x08, 0xF0, 0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x8B, 0x0F, 0xE0, 0x90, 0x8B, 0x3E,
++0xF0, 0xE4, 0xFB, 0xFD, 0x7F, 0x5C, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x5F, 0x74, 0x05,
++0xF0, 0x90, 0x06, 0x92, 0x74, 0x02, 0xF0, 0x90, 0x8B, 0x17, 0x14, 0xF0, 0xE5, 0x22, 0x54, 0x0F,
++0xC3, 0x94, 0x0C, 0x50, 0x0D, 0x12, 0x45, 0x9E, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x03, 0x12,
++0x7D, 0xC1, 0x22, 0x12, 0x4B, 0x34, 0xEF, 0x64, 0x01, 0x70, 0x37, 0xE5, 0x25, 0x54, 0x03, 0x70,
++0x31, 0xE5, 0x23, 0x54, 0x0F, 0xD3, 0x94, 0x02, 0x50, 0x28, 0xE5, 0x25, 0x20, 0xE2, 0x23, 0xE5,
++0x25, 0x20, 0xE4, 0x1E, 0x90, 0x8B, 0x0D, 0xE0, 0x70, 0x18, 0x90, 0x8B, 0x12, 0xE0, 0x70, 0x12,
++0xE5, 0x26, 0x70, 0x0E, 0x90, 0x01, 0xB9, 0xE4, 0xF0, 0x90, 0x01, 0xB8, 0x74, 0x04, 0xF0, 0x7F,
++0x01, 0x22, 0x7F, 0x00, 0x22, 0x12, 0x4B, 0x34, 0xEF, 0x64, 0x01, 0x70, 0x27, 0x90, 0x8B, 0x18,
++0xE0, 0x70, 0x21, 0x90, 0x8B, 0x17, 0xE0, 0x70, 0x1B, 0xE5, 0x23, 0x54, 0x0F, 0xD3, 0x94, 0x04,
++0x50, 0x12, 0xE5, 0x26, 0x70, 0x0E, 0x90, 0x01, 0xB9, 0xE4, 0xF0, 0x90, 0x01, 0xB8, 0x74, 0x08,
++0xF0, 0x7F, 0x01, 0x22, 0x7F, 0x00, 0x22, 0xEF, 0x24, 0xFE, 0x60, 0x0B, 0x04, 0x70, 0x22, 0x90,
++0x8B, 0x19, 0x74, 0x01, 0xF0, 0x80, 0x16, 0xED, 0x70, 0x0A, 0x90, 0x8B, 0x16, 0xE0, 0x90, 0x8B,
++0x19, 0xF0, 0x80, 0x05, 0x90, 0x8B, 0x19, 0xED, 0xF0, 0x90, 0x8B, 0x19, 0xE0, 0x90, 0x8B, 0x0B,
++0xF0, 0x22, 0x90, 0x01, 0x37, 0x74, 0x02, 0xF0, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x12, 0x7E,
++0x9A, 0xEF, 0x70, 0x06, 0x90, 0x01, 0xC8, 0x74, 0xFD, 0xF0, 0x7D, 0x02, 0x7F, 0x03, 0x12, 0x36,
++0xE6, 0x12, 0x7C, 0x50, 0x53, 0x22, 0xF0, 0x43, 0x22, 0x02, 0x22, 0xEF, 0x60, 0x0F, 0x74, 0x21,
++0x2D, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x10, 0xF0, 0x22, 0x74, 0x21, 0x2D,
++0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x54, 0xEF, 0xF0, 0x22, 0x90, 0x06, 0x04, 0xE0,
++0x54, 0xBF, 0xF0, 0xEF, 0x60, 0x0A, 0xE5, 0x21, 0xB4, 0x01, 0x05, 0xE4, 0xFF, 0x12, 0x48, 0xB3,
++0x53, 0x22, 0xF0, 0x43, 0x22, 0x0C, 0x22, 0x90, 0x04, 0x1D, 0xE0, 0x70, 0x14, 0x90, 0x8A, 0xF8,
++0xE0, 0xFF, 0xE4, 0xFD, 0x12, 0x5F, 0xFD, 0x8E, 0x69, 0x8F, 0x6A, 0x90, 0x04, 0x1F, 0x74, 0x20,
++0xF0, 0x22, 0x90, 0x8B, 0x52, 0xEF, 0xF0, 0x12, 0x7D, 0x42, 0x90, 0x8B, 0x52, 0xE0, 0x60, 0x05,
++0x90, 0x05, 0x22, 0xE4, 0xF0, 0x53, 0x22, 0xF0, 0x43, 0x22, 0x04, 0x22, 0x90, 0x06, 0x04, 0xE0,
++0x44, 0x40, 0xF0, 0xE5, 0x21, 0xB4, 0x01, 0x05, 0x7F, 0x01, 0x12, 0x48, 0xB3, 0x53, 0x22, 0xF0,
++0x43, 0x22, 0x04, 0x22, 0xE5, 0x23, 0x30, 0xE6, 0x12, 0xE5, 0x23, 0x54, 0x0F, 0xFF, 0x90, 0x01,
++0x2F, 0xE0, 0x54, 0x80, 0x4F, 0x64, 0x80, 0xF0, 0x53, 0x23, 0xBF, 0x22, 0x90, 0x8B, 0x2C, 0xE0,
++0x30, 0xE0, 0x05, 0xAF, 0x23, 0x02, 0x7E, 0x06, 0x7D, 0x01, 0xAF, 0x23, 0x12, 0x45, 0xA2, 0x22,
++0x53, 0x22, 0xF0, 0x43, 0x22, 0x01, 0x12, 0x4B, 0x5A, 0x12, 0x4B, 0x5B, 0x53, 0x22, 0xF0, 0x43,
++0x22, 0x02, 0x22, 0x41, 0x8A, 0xF6, 0x00, 0x41, 0x8B, 0x05, 0x00, 0x41, 0x8B, 0x51, 0x00, 0x41,
++0x8B, 0x53, 0x00, 0x00, 0x90, 0x04, 0x1B, 0xE0, 0x54, 0x7F, 0x64, 0x7F, 0x7F, 0x01, 0x60, 0x02,
++0x7F, 0x00, 0x22, 0xE4, 0x90, 0x8B, 0x1B, 0xF0, 0x90, 0x8B, 0x0C, 0xF0, 0xF5, 0x25, 0x22, 0x90,
++0x8B, 0x13, 0xE0, 0xA3, 0xE0, 0x90, 0x05, 0x58, 0xF0, 0x22, 0x22, 0x22, 0xF0, 0x90, 0x8B, 0x0F,
++0xE0, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB, 0xFD, 0x7F, 0x58, 0x7E, 0x01, 0xD3, 0x10, 0xAF, 0x01,
++0xC3, 0xC0, 0xD0, 0x90, 0x8B, 0x3D, 0xE0, 0xFB, 0xA3, 0xE0, 0xF5, 0x44, 0xE4, 0xF5, 0x45, 0x12,
++0x35, 0xAB, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xC0, 0xE0, 0xC0, 0xF0, 0xC0, 0x83, 0xC0, 0x82, 0xC0,
++0xD0, 0x75, 0xD0, 0x00, 0xC0, 0x00, 0xC0, 0x01, 0xC0, 0x02, 0xC0, 0x03, 0xC0, 0x04, 0xC0, 0x05,
++0xC0, 0x06, 0xC0, 0x07, 0x75, 0x0E, 0x00, 0x90, 0x01, 0xC4, 0x74, 0x87, 0xF0, 0x74, 0x4B, 0xA3,
++0xF0, 0x53, 0x91, 0xDF, 0x90, 0x01, 0x3C, 0xE0, 0x55, 0x30, 0xF5, 0x34, 0xA3, 0xE0, 0x55, 0x31,
++0xF5, 0x35, 0xA3, 0xE0, 0x55, 0x32, 0xF5, 0x36, 0xA3, 0xE0, 0x55, 0x33, 0xF5, 0x37, 0xE5, 0x34,
++0x30, 0xE0, 0x51, 0x90, 0x01, 0x3C, 0x74, 0x01, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0x30, 0xE0, 0x1F,
++0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x18, 0x90, 0x8B, 0x34, 0xE4, 0xF0, 0x90, 0x8B, 0x33, 0xE0,
++0x64, 0x03, 0x60, 0x0B, 0x7F, 0x01, 0xB1, 0xE0, 0xEF, 0x70, 0x04, 0x7F, 0x02, 0xD1, 0x89, 0x90,
++0x8B, 0x2C, 0xE0, 0xFF, 0x30, 0xE0, 0x1D, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x16, 0x90, 0x8B,
++0x2E, 0xE4, 0xF0, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x06, 0x60, 0x09, 0xE4, 0xFF, 0xB1, 0xE0, 0xEF,
++0x70, 0x02, 0xD1, 0x56, 0xE5, 0x34, 0x30, 0xE1, 0x08, 0x90, 0x01, 0x3C, 0x74, 0x02, 0xF0, 0x11,
++0x60, 0xE5, 0x34, 0x30, 0xE2, 0x28, 0x90, 0x01, 0x3C, 0x74, 0x04, 0xF0, 0x90, 0x06, 0x92, 0xE0,
++0x30, 0xE0, 0x14, 0x90, 0x8B, 0x3D, 0xE4, 0x71, 0x5C, 0x90, 0x01, 0x5B, 0x74, 0x05, 0xF0, 0x90,
++0x06, 0x92, 0x74, 0x01, 0xF0, 0x80, 0x07, 0x90, 0x8B, 0x18, 0xE4, 0xF0, 0x51, 0xFC, 0xE5, 0x34,
++0x30, 0xE3, 0x38, 0x90, 0x01, 0x3C, 0x74, 0x08, 0xF0, 0x90, 0x06, 0x92, 0xE0, 0x30, 0xE1, 0x24,
++0x90, 0x8B, 0x3D, 0xE4, 0xF0, 0x90, 0x8B, 0x0F, 0xE0, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB, 0xFD,
++0x7F, 0x5C, 0x7E, 0x01, 0x71, 0x6C, 0x90, 0x01, 0x5F, 0x74, 0x05, 0xF0, 0x90, 0x06, 0x92, 0x74,
++0x02, 0xF0, 0x80, 0x07, 0x90, 0x8B, 0x17, 0xE4, 0xF0, 0x51, 0xFC, 0xE5, 0x34, 0x30, 0xE4, 0x09,
++0x90, 0x01, 0x3C, 0x74, 0x10, 0xF0, 0x12, 0x51, 0xC9, 0xE5, 0x34, 0x30, 0xE5, 0x06, 0x90, 0x01,
++0x3C, 0x74, 0x20, 0xF0, 0xE5, 0x35, 0x30, 0xE0, 0x10, 0x90, 0x01, 0x3D, 0x74, 0x01, 0xF0, 0x90,
++0x00, 0x83, 0xE0, 0xF5, 0x23, 0x51, 0xE4, 0x51, 0xFC, 0xE5, 0x35, 0x30, 0xE2, 0x06, 0x90, 0x01,
++0x3D, 0x74, 0x04, 0xF0, 0xE5, 0x35, 0x30, 0xE4, 0x1B, 0x90, 0x01, 0x3D, 0x74, 0x10, 0xF0, 0x90,
++0x8B, 0x05, 0xE0, 0x60, 0x0F, 0xE4, 0xF0, 0x90, 0x05, 0x53, 0xE0, 0x44, 0x01, 0xF0, 0x90, 0x05,
++0xFD, 0xE0, 0x04, 0xF0, 0xE5, 0x36, 0x30, 0xE0, 0x75, 0x90, 0x01, 0x3E, 0x74, 0x01, 0xF0, 0x90,
++0x8B, 0x32, 0xE0, 0x30, 0xE0, 0x18, 0x90, 0x8B, 0x36, 0xE4, 0xF0, 0x90, 0x8B, 0x33, 0xE0, 0x64,
++0x03, 0x60, 0x0B, 0x7F, 0x01, 0xB1, 0xE0, 0xEF, 0x60, 0x04, 0x7F, 0x01, 0xD1, 0x89, 0x90, 0x8B,
++0x2C, 0xE0, 0x30, 0xE0, 0x49, 0x90, 0x8B, 0x30, 0xE4, 0xF0, 0xFF, 0xB1, 0xE0, 0xEF, 0x60, 0x3E,
++0x12, 0x65, 0x5F, 0x90, 0x8B, 0x2D, 0xE0, 0xFF, 0x64, 0x06, 0x60, 0x32, 0xEF, 0xB4, 0x04, 0x02,
++0x80, 0x07, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x04, 0xE4, 0xFF, 0x80, 0x14, 0x90, 0x8B, 0x2D,
++0xE0, 0xB4, 0x03, 0x04, 0x7F, 0x01, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02, 0x05, 0x7F,
++0x01, 0x12, 0x65, 0x82, 0x7D, 0x01, 0xAF, 0x23, 0x12, 0x45, 0xA2, 0x12, 0x7D, 0xC1, 0xE5, 0x36,
++0x30, 0xE1, 0x47, 0x90, 0x01, 0x3E, 0x74, 0x02, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0x30, 0xE0, 0x19,
++0x90, 0x8B, 0x36, 0x74, 0x01, 0xF0, 0x90, 0x8B, 0x33, 0xE0, 0x64, 0x03, 0x60, 0x0B, 0x7F, 0x01,
++0xB1, 0xE0, 0xEF, 0x70, 0x04, 0x7F, 0x02, 0xD1, 0x89, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x1A,
++0x90, 0x8B, 0x30, 0x74, 0x01, 0xF0, 0x12, 0x7E, 0x2B, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x06, 0x60,
++0x09, 0xE4, 0xFF, 0xB1, 0xE0, 0xEF, 0x70, 0x02, 0xD1, 0x56, 0x74, 0x87, 0x04, 0x90, 0x01, 0xC4,
++0xF0, 0x74, 0x4B, 0xA3, 0xF0, 0xD0, 0x07, 0xD0, 0x06, 0xD0, 0x05, 0xD0, 0x04, 0xD0, 0x03, 0xD0,
++0x02, 0xD0, 0x01, 0xD0, 0x00, 0xD0, 0xD0, 0xD0, 0x82, 0xD0, 0x83, 0xD0, 0xF0, 0xD0, 0xE0, 0x32,
++0xEF, 0x64, 0x01, 0x70, 0x3D, 0x90, 0x8B, 0x35, 0xE0, 0x60, 0x03, 0x7F, 0x00, 0x22, 0x90, 0x8B,
++0x08, 0xE0, 0x60, 0x03, 0x7F, 0x01, 0x22, 0x90, 0x8B, 0x34, 0xE0, 0x60, 0x03, 0x7F, 0x01, 0x22,
++0x90, 0x8B, 0x32, 0xE0, 0xFF, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x0B, 0xEF, 0xC4, 0x13, 0x54,
++0x07, 0x30, 0xE0, 0x03, 0x7F, 0x00, 0x22, 0x90, 0x8B, 0x36, 0xE0, 0x7F, 0x01, 0x60, 0x36, 0x7F,
++0x00, 0x22, 0x90, 0x8B, 0x2F, 0xE0, 0x60, 0x03, 0x7F, 0x00, 0x22, 0x90, 0x8B, 0x08, 0xE0, 0x60,
++0x03, 0x7F, 0x01, 0x22, 0x90, 0x8B, 0x2E, 0xE0, 0x60, 0x03, 0x7F, 0x01, 0x22, 0x90, 0x8B, 0x2C,
++0xE0, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x03, 0x7F, 0x00, 0x22, 0x90, 0x8B, 0x30, 0xE0, 0x7F,
++0x01, 0x60, 0x02, 0x7F, 0x00, 0x22, 0x90, 0x8B, 0x0D, 0xE0, 0x60, 0x16, 0x90, 0x8B, 0x2D, 0xE0,
++0x70, 0x04, 0x7F, 0x05, 0x80, 0x1F, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x01, 0x70, 0x1A, 0x7F, 0x02,
++0x80, 0x13, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x01, 0x04, 0x7F, 0x03, 0x80, 0x08, 0x90, 0x8B, 0x2D,
++0xE0, 0x70, 0x05, 0x7F, 0x04, 0x12, 0x65, 0x82, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0,
++0x90, 0x8B, 0x33, 0xE0, 0x90, 0x8B, 0x55, 0xF0, 0x6F, 0x70, 0x02, 0xE1, 0x55, 0xEF, 0x14, 0x60,
++0x3B, 0x14, 0x60, 0x5F, 0x14, 0x70, 0x02, 0xE1, 0x30, 0x24, 0x03, 0x60, 0x02, 0xE1, 0x55, 0x90,
++0x8B, 0x55, 0xE0, 0xB4, 0x03, 0x04, 0xF1, 0xC2, 0xE1, 0x55, 0x90, 0x8B, 0x55, 0xE0, 0xB4, 0x02,
++0x04, 0xF1, 0xAF, 0xE1, 0x55, 0x90, 0x8B, 0x55, 0xE0, 0xB4, 0x04, 0x04, 0xF1, 0xC6, 0xE1, 0x55,
++0x90, 0x8B, 0x55, 0xE0, 0x64, 0x01, 0x70, 0x7D, 0xF1, 0xB1, 0x80, 0x79, 0x90, 0x8B, 0x55, 0xE0,
++0xFF, 0xB4, 0x03, 0x04, 0xF1, 0xCA, 0x80, 0x6D, 0xEF, 0xB4, 0x02, 0x04, 0xF1, 0xA1, 0x80, 0x65,
++0x90, 0x8B, 0x55, 0xE0, 0xFF, 0xB4, 0x04, 0x04, 0xF1, 0xD5, 0x80, 0x59, 0xEF, 0x70, 0x56, 0xF1,
++0x8E, 0x80, 0x52, 0x90, 0x8B, 0x55, 0xE0, 0xB4, 0x03, 0x05, 0x12, 0x7C, 0x41, 0x80, 0x46, 0x90,
++0x8B, 0x55, 0xE0, 0xB4, 0x01, 0x04, 0xF1, 0x72, 0x80, 0x3B, 0x90, 0x8B, 0x55, 0xE0, 0xB4, 0x04,
++0x05, 0x12, 0x7D, 0x23, 0x80, 0x2F, 0x90, 0x8B, 0x55, 0xE0, 0x70, 0x29, 0xF1, 0x70, 0x80, 0x25,
++0x90, 0x8B, 0x55, 0xE0, 0xFF, 0xB4, 0x01, 0x04, 0xF1, 0x5A, 0x80, 0x19, 0xEF, 0xB4, 0x02, 0x04,
++0xF1, 0x6B, 0x80, 0x11, 0x90, 0x8B, 0x55, 0xE0, 0xFF, 0xB4, 0x04, 0x04, 0xF1, 0x5A, 0x80, 0x05,
++0xEF, 0x70, 0x02, 0xF1, 0x67, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, 0x05, 0x22, 0x74, 0x6F, 0xF0,
++0x90, 0x8B, 0x33, 0x74, 0x03, 0xF0, 0x22, 0xF1, 0x8E, 0x80, 0xEF, 0x12, 0x7D, 0x42, 0x80, 0xEA,
++0xF1, 0x8E, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x12, 0x7E, 0x9A, 0xEF, 0x70, 0x06, 0x90, 0x01,
++0xC8, 0x74, 0xFD, 0xF0, 0x12, 0x7C, 0x50, 0x90, 0x8B, 0x33, 0x74, 0x02, 0xF0, 0x22, 0x90, 0x01,
++0x3E, 0x74, 0x03, 0xF0, 0xFD, 0x7F, 0x02, 0x12, 0x37, 0x00, 0x90, 0x8B, 0x33, 0x74, 0x01, 0xF0,
++0x22, 0x12, 0x7D, 0x42, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x33, 0x04, 0xF0, 0x22, 0xF1,
++0xA1, 0x7D, 0x03, 0x7F, 0x02, 0x12, 0x36, 0x92, 0x90, 0x05, 0x27, 0xE4, 0xF0, 0x90, 0x8B, 0x33,
++0xF0, 0x22, 0xF1, 0xCA, 0x80, 0xEB, 0xF1, 0xD5, 0x80, 0xE7, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90,
++0x8B, 0x33, 0x04, 0xF0, 0x22, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x33, 0x04, 0xF0, 0x22,
++0xF1, 0x8E, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x90, 0x8B, 0x33, 0x74, 0x04, 0xF0, 0x22, 0x90,
++0x02, 0x84, 0xEF, 0xF0, 0xA3, 0xEE, 0xF0, 0xA3, 0x74, 0x05, 0xF0, 0x22, 0xEF, 0x8E, 0xF0, 0x12,
++0x43, 0xBA, 0x50, 0x1A, 0x00, 0x40, 0x50, 0x42, 0x00, 0x80, 0x50, 0x6D, 0x01, 0x00, 0x50, 0x81,
++0x02, 0x00, 0x50, 0x99, 0x04, 0x00, 0x00, 0x00, 0x50, 0xB6, 0xED, 0x54, 0x3F, 0x70, 0x04, 0xFE,
++0xFF, 0x80, 0x04, 0x7E, 0x00, 0x7F, 0x40, 0xEF, 0x2D, 0xFF, 0xEE, 0x3C, 0xFE, 0xEF, 0x78, 0x06,
++0xCE, 0xC3, 0x13, 0xCE, 0x13, 0xD8, 0xF9, 0x78, 0x06, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9,
++0x80, 0x26, 0xED, 0x54, 0x7F, 0x70, 0x04, 0xFE, 0xFF, 0x80, 0x04, 0x7E, 0x00, 0x7F, 0x80, 0xEF,
++0x2D, 0xFF, 0xEE, 0x3C, 0xFE, 0xEF, 0x78, 0x07, 0xCE, 0xC3, 0x13, 0xCE, 0x13, 0xD8, 0xF9, 0x78,
++0x07, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFD, 0xAC, 0x06, 0x80, 0x49, 0xED, 0x70, 0x04,
++0xFE, 0xFF, 0x80, 0x04, 0x7E, 0x01, 0x7F, 0x00, 0xEF, 0x2D, 0xEE, 0x3C, 0x7D, 0x00, 0xFC, 0x80,
++0x35, 0xEC, 0x54, 0x01, 0x4D, 0x70, 0x04, 0xFE, 0xFF, 0x80, 0x04, 0x7E, 0x02, 0x7F, 0x00, 0xEF,
++0x2D, 0xEE, 0x3C, 0xC3, 0x13, 0x7D, 0x00, 0x80, 0x1A, 0xEC, 0x54, 0x03, 0x4D, 0x70, 0x04, 0xFE,
++0xFF, 0x80, 0x04, 0x7E, 0x04, 0x7F, 0x00, 0xEF, 0x2D, 0xEE, 0x3C, 0x13, 0x13, 0x54, 0x3F, 0x7D,
++0x00, 0x25, 0xE0, 0x25, 0xE0, 0xFC, 0xAE, 0x04, 0xAF, 0x05, 0x22, 0x90, 0x01, 0xE4, 0x74, 0x58,
++0xF0, 0xA3, 0x74, 0x02, 0xF0, 0x22, 0xE4, 0x90, 0x8A, 0xCC, 0xF0, 0xA3, 0xF0, 0x75, 0x8E, 0x02,
++0x91, 0x0E, 0x12, 0x68, 0x44, 0x90, 0x8B, 0x07, 0xEF, 0xF0, 0x12, 0x68, 0x51, 0x90, 0x8B, 0x09,
++0xEF, 0xF0, 0x12, 0x68, 0x5D, 0x90, 0x8A, 0xF4, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0xE4, 0xF5, 0x55,
++0xF5, 0x21, 0x12, 0x72, 0x55, 0x12, 0x44, 0x9E, 0x12, 0x32, 0x3D, 0x7F, 0x03, 0x12, 0x78, 0x42,
++0x12, 0x7C, 0x3D, 0x12, 0x68, 0x0A, 0x12, 0x68, 0x75, 0x12, 0x68, 0x8A, 0x12, 0x68, 0x28, 0x12,
++0x68, 0x43, 0x90, 0x8A, 0xCE, 0xE5, 0xD9, 0xF0, 0x31, 0x5F, 0xC2, 0xAF, 0x90, 0x00, 0x80, 0xE0,
++0x44, 0x40, 0xF0, 0x51, 0x0E, 0x75, 0xE8, 0x03, 0x43, 0xA8, 0x85, 0xD2, 0xAF, 0x11, 0xBB, 0x90,
++0x8A, 0xCC, 0xE0, 0x64, 0x01, 0xF0, 0x24, 0xC6, 0x90, 0x01, 0xC4, 0xF0, 0x74, 0x50, 0xA3, 0xF0,
++0xE5, 0x55, 0x30, 0xE4, 0x09, 0xC2, 0xAF, 0x53, 0x55, 0xEF, 0xD2, 0xAF, 0xB1, 0x59, 0xE5, 0x55,
++0x30, 0xE6, 0xDC, 0xC2, 0xAF, 0x53, 0x55, 0xBF, 0xD2, 0xAF, 0x12, 0x6B, 0xBD, 0x80, 0xD0, 0x90,
++0x01, 0x3C, 0x74, 0xFF, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0x90, 0x01, 0x34, 0xF0, 0xA3, 0xF0, 0xA3,
++0xF0, 0xA3, 0xF0, 0xFD, 0x7F, 0x54, 0x31, 0x88, 0x7D, 0xFF, 0x7F, 0x55, 0x31, 0x88, 0x7D, 0xFF,
++0x7F, 0x56, 0x31, 0x88, 0x7D, 0xFF, 0x7F, 0x57, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x8F,
++0x82, 0x75, 0x83, 0x00, 0xED, 0xF0, 0x51, 0x0E, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, 0x01, 0x30,
++0xE4, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0x90, 0x01, 0x38, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0,
++0xA3, 0xF0, 0xFD, 0x7F, 0x50, 0x31, 0x88, 0xE4, 0xFD, 0x7F, 0x51, 0x31, 0x88, 0xE4, 0xFD, 0x7F,
++0x52, 0x31, 0x88, 0xE4, 0xFD, 0x7F, 0x53, 0x80, 0xBF, 0xE5, 0x5E, 0x64, 0x01, 0x70, 0x3B, 0x71,
++0x4E, 0xBF, 0x01, 0x04, 0x7F, 0x01, 0x71, 0x42, 0x90, 0x00, 0x46, 0xE0, 0x44, 0x04, 0xFD, 0x7F,
++0x46, 0x31, 0x88, 0x90, 0x00, 0x44, 0xE0, 0x54, 0xFB, 0xFD, 0x7F, 0x44, 0x31, 0x88, 0x90, 0x00,
++0x46, 0xE0, 0x54, 0xFB, 0xFD, 0x7F, 0x46, 0x31, 0x88, 0x7F, 0x02, 0x71, 0x6A, 0x8F, 0x62, 0x90,
++0x01, 0xC9, 0xE5, 0x62, 0xF0, 0xB4, 0x01, 0x02, 0x51, 0xE2, 0x22, 0xE0, 0x5F, 0xF0, 0xD3, 0x10,
++0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x7F, 0x10, 0xDF, 0xFE, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xD3, 0x10,
++0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8A, 0xE0, 0xED, 0xF0, 0x90, 0x8A, 0xDF, 0xEF, 0xF0, 0xD3,
++0x94, 0x07, 0x50, 0x4E, 0xA3, 0xE0, 0x70, 0x1A, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74, 0x01, 0xA8,
++0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x47, 0xE0, 0x5F, 0xF0,
++0x80, 0x17, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33,
++0xD8, 0xFC, 0xFF, 0x90, 0x00, 0x47, 0xE0, 0x4F, 0xF0, 0x51, 0x0E, 0x90, 0x8A, 0xDF, 0xE0, 0xFF,
++0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x46,
++0x80, 0x59, 0x90, 0x8A, 0xDF, 0xE0, 0x24, 0xF8, 0xF0, 0xA3, 0xE0, 0x70, 0x1D, 0x90, 0x8A, 0xDF,
++0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xC4, 0x54, 0xF0,
++0xF4, 0xFF, 0x90, 0x00, 0x43, 0xE0, 0x5F, 0xF0, 0x80, 0x1A, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74,
++0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xC4, 0x54, 0xF0, 0xFF, 0x90, 0x00,
++0x43, 0xE0, 0x4F, 0xF0, 0x51, 0x0E, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08,
++0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x43, 0x51, 0x0B, 0xD0, 0xD0, 0x92,
++0xAF, 0x22, 0x90, 0x00, 0x49, 0xE0, 0x90, 0x8B, 0x54, 0xF0, 0xE0, 0x54, 0x0F, 0xF0, 0x44, 0xF0,
++0xFD, 0x7F, 0x49, 0x31, 0x88, 0x90, 0x8B, 0x54, 0xE0, 0x44, 0xB0, 0xFD, 0x7F, 0x49, 0x21, 0x88,
++0x90, 0x8A, 0xDD, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0x75, 0x5E, 0x01, 0x8E, 0x5F, 0xF5, 0x60, 0xE4,
++0xFD, 0x7F, 0x0B, 0x51, 0x1E, 0xE4, 0xFD, 0x7F, 0x02, 0x51, 0x1E, 0x71, 0x4E, 0xE4, 0xFF, 0x71,
++0x42, 0xE4, 0xF5, 0x62, 0x90, 0x01, 0xC9, 0xE5, 0x62, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0xFC, 0xA3,
++0xE0, 0xFD, 0xEC, 0xFB, 0x8D, 0x44, 0xE4, 0xF5, 0x45, 0x7D, 0x01, 0x7F, 0x60, 0x7E, 0x01, 0x02,
++0x35, 0xAB, 0x90, 0x01, 0xCA, 0xE5, 0x61, 0xF0, 0xEF, 0x60, 0x02, 0x51, 0xE2, 0x22, 0x7F, 0x0B,
++0x71, 0x6A, 0xEF, 0x65, 0x61, 0x60, 0x10, 0xE5, 0x61, 0xB4, 0x01, 0x05, 0xE4, 0xF5, 0x61, 0x80,
++0x03, 0x75, 0x61, 0x01, 0x7F, 0x01, 0x22, 0x7F, 0x00, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0,
++0xD0, 0x90, 0x8B, 0x57, 0xEF, 0xF0, 0xD3, 0x94, 0x07, 0x50, 0x43, 0xE0, 0xFF, 0x74, 0x01, 0xA8,
++0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x46, 0x51, 0x0B, 0x90,
++0x8B, 0x57, 0xE0, 0xFD, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x05, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE,
++0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0x90, 0x00, 0x44, 0xE0, 0xFB, 0xE4, 0xFE, 0xEF, 0x5B, 0xA8, 0x05,
++0x08, 0x80, 0x06, 0xCE, 0xA2, 0xE7, 0x13, 0xCE, 0x13, 0xD8, 0xF8, 0xFF, 0x80, 0x4B, 0x90, 0x8B,
++0x57, 0xE0, 0x24, 0xF8, 0xF0, 0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33,
++0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x43, 0xE0, 0x5F, 0xF0, 0x51, 0x0E, 0x90, 0x8B, 0x57, 0xE0,
++0xFD, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x05, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8,
++0xF9, 0xFF, 0x90, 0x00, 0x42, 0xE0, 0xFB, 0xE4, 0xFE, 0xEF, 0x5B, 0xA8, 0x05, 0x08, 0x80, 0x06,
++0xCE, 0xA2, 0xE7, 0x13, 0xCE, 0x13, 0xD8, 0xF8, 0xFF, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xE4, 0x90,
++0x8B, 0x04, 0xF0, 0x90, 0x00, 0x80, 0xE0, 0x44, 0x80, 0xFD, 0x7F, 0x80, 0x21, 0x88, 0xD3, 0x10,
++0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x8B, 0x90, 0x8A, 0xDA, 0x12, 0x43,
++0x6B, 0x90, 0x00, 0x01, 0x12, 0x42, 0xC2, 0xFA, 0xE5, 0xF0, 0x24, 0x00, 0xFF, 0xE4, 0x3A, 0xFE,
++0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x01, 0xEE, 0x8F, 0xF0, 0x12, 0x43, 0x19, 0x12,
++0x29, 0xD9, 0xFF, 0x60, 0x2C, 0xB5, 0x5E, 0x16, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x90, 0x00,
++0x01, 0x12, 0x42, 0xC2, 0x65, 0x60, 0x70, 0x04, 0xE5, 0x5F, 0x65, 0xF0, 0x60, 0x22, 0x90, 0x8A,
++0xDA, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x01, 0x12, 0x42, 0xC2, 0xFF, 0xAE, 0xF0, 0x71, 0x00, 0x80,
++0x0F, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x12, 0x29, 0xD9, 0x65, 0x5E, 0x60, 0x02, 0x91, 0x95,
++0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xE4, 0xF5, 0x5E, 0x7F, 0x60, 0x7E, 0x01, 0x8F, 0x82, 0x8E, 0x83,
++0xA3, 0xA3, 0xA3, 0xE4, 0xF0, 0x22, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x8B, 0xEF, 0x12, 0x43, 0x94,
++0x54, 0xE7, 0x01, 0x54, 0xDE, 0x02, 0x55, 0x0B, 0x03, 0x55, 0x14, 0x05, 0x55, 0x1D, 0x06, 0x55,
++0x58, 0x07, 0x55, 0x25, 0x08, 0x55, 0x2E, 0x09, 0x55, 0x36, 0x20, 0x55, 0x3F, 0x2C, 0x54, 0xF0,
++0x2D, 0x54, 0xF9, 0x2E, 0x55, 0x02, 0x3B, 0x55, 0x48, 0x4B, 0x00, 0x00, 0x55, 0x51, 0x90, 0x8A,
++0xD7, 0x12, 0x43, 0x6B, 0x02, 0x74, 0x85, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x74, 0x8B,
++0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x74, 0xB8, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02,
++0x75, 0x00, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x75, 0x39, 0x90, 0x8A, 0xD7, 0x12, 0x43,
++0x6B, 0x02, 0x75, 0x52, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x74, 0x0F, 0x90, 0x8A, 0xD7,
++0x12, 0x43, 0x6B, 0xC1, 0xA6, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x75, 0x9A, 0x90, 0x8A,
++0xD7, 0x12, 0x43, 0x6B, 0x81, 0x1E, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x78, 0x81, 0x90,
++0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x7A, 0xC2, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x7C,
++0x2B, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x01, 0xF0, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0,
++0x90, 0x01, 0xCC, 0xE0, 0x54, 0x0F, 0x90, 0x8A, 0xCF, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFD, 0x70,
++0x02, 0xC1, 0xA1, 0x90, 0x8B, 0x51, 0xE0, 0xFF, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80,
++0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0xEF, 0x5D, 0x70, 0x02, 0xC1, 0x9A, 0x90,
++0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD0, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD0,
++0xF0, 0x75, 0x1D, 0x01, 0x75, 0x1E, 0x8A, 0x75, 0x1F, 0xD0, 0x75, 0x20, 0x01, 0x7B, 0x01, 0x7A,
++0x8A, 0x79, 0xD1, 0x12, 0x5E, 0xE4, 0x90, 0x8A, 0xD1, 0xE0, 0xFF, 0xC4, 0x13, 0x13, 0x13, 0x54,
++0x01, 0x90, 0x8B, 0x51, 0x30, 0xE0, 0x59, 0xE0, 0x75, 0xF0, 0x02, 0x90, 0x00, 0x88, 0x12, 0x43,
++0x5F, 0xE0, 0x90, 0x8A, 0xD2, 0xF0, 0x90, 0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x02, 0x90, 0x00, 0x89,
++0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD3, 0xF0, 0x90, 0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x04, 0x90,
++0x01, 0xD1, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD4, 0xF0, 0x90, 0x8B, 0x51, 0xE0, 0x75, 0xF0,
++0x04, 0x90, 0x01, 0xD2, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD5, 0xF0, 0x90, 0x8B, 0x51, 0xE0,
++0x75, 0xF0, 0x04, 0x90, 0x01, 0xD3, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD6, 0xF0, 0x80, 0x33,
++0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD1, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD2, 0xF0, 0x90,
++0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD2, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD3,
++0xF0, 0x90, 0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD3, 0x12, 0x43, 0x5F, 0xE0, 0x90,
++0x8A, 0xD4, 0xF0, 0xEF, 0x54, 0x7F, 0xFF, 0x7B, 0x01, 0x7A, 0x8A, 0x79, 0xD2, 0x91, 0xA6, 0x90,
++0x8A, 0xCF, 0xE0, 0xFF, 0x90, 0x8B, 0x51, 0xE0, 0xFE, 0x74, 0x01, 0xA8, 0x06, 0x08, 0x80, 0x02,
++0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0x5F, 0x90, 0x8A, 0xCF, 0xF0, 0x90, 0x8B, 0x51, 0xE0, 0xFF, 0x74,
++0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0x90, 0x01, 0xCC, 0xF0, 0x90, 0x8B,
++0x51, 0xE0, 0x04, 0xF0, 0xE0, 0x54, 0x03, 0xF0, 0xA1, 0x6A, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x02,
++0xF0, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, 0x00, 0x04, 0x12, 0x42, 0x20, 0xFF, 0x54, 0x1F, 0xFE,
++0xEF, 0x54, 0x20, 0xC4, 0x13, 0x54, 0x07, 0xFD, 0xAF, 0x06, 0x90, 0x8A, 0xDA, 0xEF, 0xF0, 0xA3,
++0xED, 0xF0, 0xA3, 0x12, 0x43, 0x8B, 0x90, 0x8A, 0xDC, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x03, 0x12,
++0x42, 0x20, 0x54, 0xF0, 0xC4, 0x54, 0x0F, 0x90, 0x8A, 0xDF, 0xF0, 0x90, 0x00, 0x04, 0x12, 0x42,
++0x20, 0x54, 0x40, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x90, 0x8A, 0xE0, 0xF0, 0x90, 0x8A, 0xDA, 0xE0,
++0xFF, 0x75, 0xF0, 0x09, 0x90, 0x87, 0x25, 0x12, 0x43, 0x5F, 0xAD, 0x82, 0xAC, 0x83, 0x90, 0x8A,
++0xE1, 0xEC, 0xF0, 0xA3, 0xED, 0xF0, 0xEF, 0x75, 0xF0, 0x09, 0xA4, 0x24, 0x23, 0xF9, 0x74, 0x87,
++0x35, 0xF0, 0xFA, 0x7B, 0x01, 0xA3, 0x12, 0x43, 0x8B, 0x90, 0x8A, 0xDC, 0x12, 0x43, 0x6B, 0x90,
++0x00, 0x03, 0x12, 0x42, 0x20, 0x54, 0x0F, 0xFF, 0x90, 0x8A, 0xE3, 0x12, 0x43, 0x6B, 0xEF, 0x12,
++0x42, 0x4D, 0x90, 0x8A, 0xDC, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFF, 0x90,
++0x8A, 0xE3, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x01, 0xEF, 0x12, 0x42, 0x5F, 0x90, 0x8A, 0xDC, 0x12,
++0x43, 0x6B, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0xFF, 0x90, 0x8A, 0xE1, 0xE0, 0xFC, 0xA3, 0xE0,
++0xFD, 0xF5, 0x82, 0x8C, 0x83, 0xEF, 0xF0, 0x12, 0x29, 0xD9, 0x8D, 0x82, 0x8C, 0x83, 0xA3, 0xF0,
++0x90, 0x8A, 0xDF, 0xE0, 0xFE, 0x90, 0x8A, 0xDA, 0xE0, 0xFF, 0x24, 0xC1, 0xF5, 0x82, 0xE4, 0x34,
++0x86, 0xF5, 0x83, 0xEE, 0xF0, 0x90, 0x8A, 0xDB, 0xE0, 0xFE, 0x75, 0xF0, 0x09, 0xEF, 0x90, 0x87,
++0x29, 0x12, 0x43, 0x5F, 0xEE, 0xF0, 0x75, 0xF0, 0x09, 0xEF, 0x90, 0x87, 0x2A, 0x12, 0x43, 0x5F,
++0x74, 0x01, 0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0xFE, 0x75, 0xF0, 0x09, 0xEF, 0x90, 0x87, 0x2B, 0x12,
++0x43, 0x5F, 0xEE, 0xF0, 0x8F, 0x0F, 0xEF, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89,
++0xAF, 0x82, 0xF5, 0x10, 0x8F, 0x11, 0xE5, 0x0F, 0x75, 0xF0, 0x02, 0xA4, 0x24, 0x81, 0xF9, 0x74,
++0x86, 0x35, 0xF0, 0x75, 0x12, 0x01, 0xF5, 0x13, 0x89, 0x14, 0x75, 0xF0, 0x09, 0xE5, 0x0F, 0x90,
++0x87, 0x25, 0x12, 0x43, 0x5F, 0xAF, 0x82, 0x85, 0x83, 0x15, 0x8F, 0x16, 0xE5, 0x0F, 0x75, 0xF0,
++0x09, 0xA4, 0x24, 0x23, 0xF9, 0x74, 0x87, 0x35, 0xF0, 0x75, 0x17, 0x01, 0xF5, 0x18, 0x89, 0x19,
++0x74, 0xC1, 0x25, 0x0F, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0x12, 0x43, 0x94, 0x58,
++0x34, 0x00, 0x58, 0x49, 0x01, 0x58, 0x5E, 0x02, 0x58, 0x73, 0x03, 0x58, 0x9C, 0x04, 0x58, 0xB1,
++0x05, 0x58, 0xC6, 0x06, 0x58, 0xEC, 0x0C, 0x59, 0x19, 0x0D, 0x59, 0x46, 0x0E, 0x59, 0x73, 0x0F,
++0x00, 0x00, 0x59, 0xA7, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5,
++0x83, 0x74, 0xF0, 0xF0, 0xA3, 0x74, 0x15, 0x80, 0x3C, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5,
++0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0x74, 0xF0, 0xF0, 0xA3, 0x74, 0x10, 0x80, 0x27, 0xE5, 0x0F,
++0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0x74, 0xF0, 0xF0, 0xA3, 0x74,
++0x05, 0x80, 0x12, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83,
++0x74, 0xF0, 0xF0, 0xA3, 0xE4, 0xF0, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34,
++0x86, 0xF5, 0x83, 0x74, 0x0F, 0xF0, 0xA3, 0x74, 0x8F, 0xF0, 0x21, 0xA7, 0xE5, 0x0F, 0x25, 0xE0,
++0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0x74, 0x0F, 0xF0, 0xA3, 0x74, 0xF5, 0x80,
++0x27, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0x74, 0x0F,
++0xF0, 0xA3, 0x74, 0xF0, 0x80, 0x12, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34,
++0x89, 0xF5, 0x83, 0xE4, 0xF0, 0xA3, 0x74, 0x0D, 0xF0, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81, 0xF5,
++0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0x21, 0xA7, 0x90, 0x04, 0x47, 0xE0,
++0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x12, 0x42, 0x4D, 0x90, 0x04, 0x46, 0xE0, 0xAB, 0x12, 0xAA,
++0x13, 0xA9, 0x14, 0x90, 0x00, 0x01, 0x12, 0x42, 0x5F, 0x90, 0x04, 0x45, 0xE0, 0x85, 0x11, 0x82,
++0x85, 0x10, 0x83, 0xF0, 0x90, 0x04, 0x44, 0x21, 0x9E, 0x90, 0x04, 0x4B, 0xE0, 0xAB, 0x12, 0xAA,
++0x13, 0xA9, 0x14, 0x12, 0x42, 0x4D, 0x90, 0x04, 0x4A, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14,
++0x90, 0x00, 0x01, 0x12, 0x42, 0x5F, 0x90, 0x04, 0x49, 0xE0, 0x85, 0x11, 0x82, 0x85, 0x10, 0x83,
++0xF0, 0x90, 0x04, 0x48, 0x80, 0x58, 0x90, 0x04, 0x4F, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14,
++0x12, 0x42, 0x4D, 0x90, 0x04, 0x4E, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x01,
++0x12, 0x42, 0x5F, 0x90, 0x04, 0x4D, 0xE0, 0x85, 0x11, 0x82, 0x85, 0x10, 0x83, 0xF0, 0x90, 0x04,
++0x4C, 0x80, 0x2B, 0x90, 0x04, 0x53, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x12, 0x42, 0x4D,
++0x90, 0x04, 0x52, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x01, 0x12, 0x42, 0x5F,
++0x90, 0x04, 0x51, 0xE0, 0x85, 0x11, 0x82, 0x85, 0x10, 0x83, 0xF0, 0x90, 0x04, 0x50, 0xE0, 0x85,
++0x11, 0x82, 0x85, 0x10, 0x83, 0xA3, 0xF0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0xC0, 0x03, 0xC0,
++0x02, 0xC0, 0x01, 0x12, 0x29, 0xD9, 0xFF, 0xAB, 0x17, 0xAA, 0x18, 0xA9, 0x19, 0x12, 0x29, 0xD9,
++0x5F, 0xD0, 0x01, 0xD0, 0x02, 0xD0, 0x03, 0x12, 0x42, 0x4D, 0xAB, 0x12, 0xE5, 0x14, 0x24, 0x01,
++0xF9, 0xE4, 0x35, 0x13, 0xFA, 0xC0, 0x03, 0xC0, 0x02, 0xC0, 0x01, 0x12, 0x29, 0xD9, 0xFF, 0xAB,
++0x17, 0xAA, 0x18, 0xA9, 0x19, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0x5F, 0xD0, 0x01, 0xD0, 0x02,
++0xD0, 0x03, 0x12, 0x42, 0x4D, 0x85, 0x11, 0x82, 0x85, 0x10, 0x83, 0xC0, 0x83, 0xC0, 0x82, 0xE0,
++0xFF, 0x85, 0x16, 0x82, 0x85, 0x15, 0x83, 0xE0, 0xFE, 0xEF, 0x5E, 0xD0, 0x82, 0xD0, 0x83, 0xF0,
++0x85, 0x11, 0x82, 0x85, 0x10, 0x83, 0xA3, 0xC0, 0x83, 0xC0, 0x82, 0xE0, 0xFF, 0x85, 0x16, 0x82,
++0x85, 0x15, 0x83, 0xA3, 0xE0, 0xFE, 0xEF, 0x5E, 0xD0, 0x82, 0xD0, 0x83, 0xF0, 0xE5, 0x0F, 0x25,
++0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0xFE, 0xA3, 0xE0, 0x4E, 0x60,
++0x4B, 0x90, 0x8A, 0xE6, 0x74, 0x0B, 0xF0, 0x90, 0x8A, 0xE6, 0xE0, 0xFF, 0xC3, 0x94, 0x00, 0x50,
++0x02, 0x41, 0xEC, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33,
++0xCE, 0xD8, 0xF9, 0xFF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5,
++0x83, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x60, 0x0A, 0x90, 0x8A, 0xE6, 0xE0, 0x24, 0x10,
++0xA3, 0xF0, 0x80, 0x68, 0x90, 0x8A, 0xE6, 0xE0, 0x14, 0xF0, 0x80, 0xBB, 0xE5, 0x0F, 0x25, 0xE0,
++0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFE, 0xA3, 0xE0, 0x4E, 0x60, 0x47,
++0x90, 0x8A, 0xE6, 0x74, 0x0F, 0xF0, 0x90, 0x8A, 0xE6, 0xE0, 0xFF, 0xC3, 0x94, 0x00, 0x40, 0x3C,
++0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9,
++0xFF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0x5E,
++0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x60, 0x08, 0x90, 0x8A, 0xE6, 0xE0, 0xA3, 0xF0, 0x80, 0x0D, 0x90,
++0x8A, 0xE6, 0xE0, 0x14, 0xF0, 0x80, 0xBF, 0xE4, 0x90, 0x8A, 0xE7, 0xF0, 0xE5, 0x0F, 0x25, 0xE0,
++0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFE, 0xA3, 0xE0, 0x4E, 0x60, 0x46,
++0xE4, 0x90, 0x8A, 0xE6, 0xF0, 0x90, 0x8A, 0xE6, 0xE0, 0xFF, 0xC3, 0x94, 0x10, 0x40, 0x02, 0x61,
++0xA5, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8,
++0xF9, 0xFF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0,
++0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x60, 0x06, 0x90, 0x8A, 0xE6, 0xE0, 0x80, 0x63, 0x90, 0x8A,
++0xE6, 0xE0, 0x04, 0xF0, 0x80, 0xBF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34,
++0x86, 0xF5, 0x83, 0xE0, 0xFE, 0xA3, 0xE0, 0x4E, 0x60, 0x46, 0xE4, 0x90, 0x8A, 0xE6, 0xF0, 0x90,
++0x8A, 0xE6, 0xE0, 0xFF, 0xC3, 0x94, 0x0C, 0x50, 0x3C, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08,
++0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81,
++0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x60, 0x08,
++0x90, 0x8A, 0xE6, 0xE0, 0x24, 0x10, 0x80, 0x09, 0x90, 0x8A, 0xE6, 0xE0, 0x04, 0xF0, 0x80, 0xBF,
++0xE4, 0x90, 0x8A, 0xE8, 0xF0, 0x90, 0x8A, 0xE7, 0xE0, 0xFF, 0x75, 0xF0, 0x09, 0xE5, 0x0F, 0x90,
++0x87, 0x27, 0x12, 0x43, 0x5F, 0xEF, 0xF0, 0x90, 0x8A, 0xE8, 0xE0, 0xFE, 0x75, 0xF0, 0x09, 0xE5,
++0x0F, 0x90, 0x87, 0x28, 0x12, 0x43, 0x5F, 0xEE, 0xF0, 0xE5, 0x0F, 0xC3, 0x94, 0x20, 0x50, 0x32,
++0x74, 0x84, 0x25, 0x0F, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE0, 0xD3, 0x9F, 0x40, 0x02,
++0x80, 0x18, 0x74, 0x84, 0x25, 0x0F, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE0, 0xC3, 0x9E,
++0x50, 0x08, 0x90, 0x8A, 0xE8, 0xE0, 0xA3, 0xF0, 0x80, 0x08, 0x90, 0x8A, 0xE7, 0xE0, 0x90, 0x8A,
++0xE9, 0xF0, 0x90, 0x8A, 0xE9, 0xE0, 0xFD, 0xAF, 0x0F, 0x91, 0x4E, 0x90, 0x8A, 0xE9, 0xE0, 0xFF,
++0x74, 0x84, 0x25, 0x0F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEF, 0xF0, 0x90, 0x8A, 0xE7,
++0xE0, 0xFF, 0xD3, 0x94, 0x13, 0x40, 0x07, 0x90, 0x87, 0x22, 0x74, 0x03, 0xF0, 0x22, 0xEF, 0xD3,
++0x94, 0x0B, 0x40, 0x07, 0x90, 0x87, 0x22, 0x74, 0x02, 0xF0, 0x22, 0xEF, 0xD3, 0x94, 0x03, 0x40,
++0x07, 0x90, 0x87, 0x22, 0x74, 0x01, 0xF0, 0x22, 0xE4, 0x90, 0x87, 0x22, 0xF0, 0x22, 0xD3, 0x10,
++0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x74, 0x84, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xED,
++0xF0, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xAC, 0x07, 0xED, 0x54, 0x1F, 0x90, 0x8A, 0xC7, 0xF0, 0x74,
++0x01, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0x90, 0x8A, 0xC5, 0xF0, 0x90, 0x8A,
++0xC8, 0x74, 0x01, 0xF0, 0xEB, 0xC3, 0x94, 0x01, 0x40, 0x02, 0x80, 0x37, 0x90, 0x8A, 0xC5, 0xE0,
++0x25, 0x0D, 0xFF, 0xA3, 0xF0, 0xA3, 0xE0, 0x90, 0x41, 0x9E, 0x93, 0xFE, 0xEF, 0xD3, 0x9E, 0x40,
++0x10, 0x74, 0x01, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE4, 0xF0, 0xAF, 0x04, 0x80,
++0x9D, 0x90, 0x8A, 0xC6, 0xE0, 0xFF, 0x74, 0x01, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83,
++0xEF, 0xF0, 0x22, 0xAD, 0x07, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x27, 0x12, 0x43, 0x5F, 0xE0,
++0xFF, 0x90, 0x8A, 0xCA, 0xF0, 0x74, 0xA5, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0,
++0x54, 0x1F, 0x90, 0x8A, 0xC9, 0xF0, 0xD3, 0x9F, 0x40, 0x06, 0xA3, 0xE0, 0x90, 0x8A, 0xC9, 0xF0,
++0x90, 0x8A, 0xC9, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0x66, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83,
++0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xEF, 0x25, 0xE0, 0x24, 0x2E, 0xF5, 0x82, 0xE4, 0x34,
++0x41, 0xF5, 0x83, 0x74, 0x01, 0x93, 0x2B, 0xFF, 0xE4, 0x93, 0x3A, 0xC3, 0x13, 0xFE, 0xEF, 0x13,
++0xFF, 0xED, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xEE, 0xF0, 0xA3,
++0xEF, 0xF0, 0xAF, 0x05, 0x90, 0x8A, 0xC9, 0xE0, 0xFD, 0x91, 0x4E, 0x90, 0x8A, 0xC9, 0xE0, 0xFF,
++0x22, 0xAC, 0x07, 0x74, 0x84, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE0, 0x54, 0x7F,
++0x90, 0x8A, 0xDE, 0xF0, 0xE0, 0x54, 0x1F, 0xFF, 0x90, 0x8A, 0xE1, 0xF0, 0x75, 0xF0, 0x09, 0xEC,
++0x90, 0x87, 0x28, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xE3, 0xF0, 0x75, 0xF0, 0x09, 0xEC, 0x90,
++0x87, 0x27, 0x12, 0x43, 0x5F, 0xE0, 0xFE, 0x90, 0x8A, 0xE4, 0xF0, 0xEC, 0x25, 0xE0, 0x24, 0xE4,
++0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFB, 0xA3, 0xE0, 0x90, 0x8A, 0xE5, 0xCB, 0xF0,
++0xA3, 0xEB, 0xF0, 0xEC, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0,
++0xFB, 0xA3, 0xE0, 0x90, 0x8A, 0xE7, 0xCB, 0xF0, 0xA3, 0xEB, 0xF0, 0xEF, 0xD3, 0x9E, 0x40, 0x0C,
++0x90, 0x8A, 0xE4, 0xE0, 0x90, 0x8A, 0xE1, 0xF0, 0x90, 0x8A, 0xDE, 0xF0, 0xED, 0x70, 0x02, 0xC1,
++0x93, 0x90, 0x8A, 0xE2, 0xED, 0xF0, 0x90, 0x8A, 0xDE, 0xE0, 0x30, 0xE6, 0x0E, 0x90, 0x8A, 0xE1,
++0xE0, 0x90, 0x8A, 0xDE, 0xF0, 0x90, 0x8A, 0xE2, 0xE0, 0x14, 0xF0, 0x90, 0x8A, 0xE2, 0xE0, 0x70,
++0x02, 0xC1, 0x93, 0x90, 0x8A, 0xE1, 0xE0, 0xFF, 0xD3, 0x94, 0x00, 0x50, 0x02, 0xC1, 0x93, 0xE4,
++0x90, 0x8A, 0xE0, 0xF0, 0xEF, 0x14, 0x90, 0x8A, 0xDF, 0xF0, 0x90, 0x8A, 0xE3, 0xE0, 0xFD, 0x90,
++0x8A, 0xDF, 0xE0, 0xFF, 0xD3, 0x9D, 0x40, 0x6F, 0xEF, 0x94, 0x10, 0x40, 0x21, 0xEF, 0x24, 0xF0,
++0xFF, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8,
++0xF9, 0xFF, 0x90, 0x8A, 0xE7, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x70, 0x27, 0x90, 0x8A,
++0xDF, 0xE0, 0xFF, 0xC3, 0x94, 0x10, 0x50, 0x37, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80,
++0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0x90, 0x8A, 0xE5, 0xE0, 0x5E, 0xFE, 0xA3,
++0xE0, 0x5F, 0x4E, 0x60, 0x1A, 0x90, 0x8A, 0xDF, 0xE0, 0x90, 0x8A, 0xDE, 0xF0, 0x90, 0x8A, 0xE0,
++0xE0, 0x04, 0xF0, 0x90, 0x8A, 0xE2, 0xE0, 0xFF, 0x90, 0x8A, 0xE0, 0xE0, 0x6F, 0x60, 0x08, 0x90,
++0x8A, 0xDF, 0xE0, 0x14, 0xF0, 0x80, 0x83, 0x90, 0x8A, 0xE2, 0xE0, 0xFF, 0x90, 0x8A, 0xE0, 0xE0,
++0xC3, 0x9F, 0x50, 0x0F, 0x90, 0x8A, 0xDF, 0xE0, 0xB5, 0x05, 0x08, 0x90, 0x8A, 0xE3, 0xE0, 0x90,
++0x8A, 0xDE, 0xF0, 0x90, 0x8A, 0xDE, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0x66, 0xF5, 0x82, 0xE4, 0x34,
++0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xEF, 0x25, 0xE0, 0x24, 0x2E, 0xF5,
++0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0x74, 0x01, 0x93, 0x2B, 0xFF, 0xE4, 0x93, 0x3A, 0xC3, 0x13,
++0xFE, 0xEF, 0x13, 0xFF, 0xEC, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83,
++0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0xAF, 0x04, 0x90, 0x8A, 0xDE, 0xE0, 0xFD, 0x91, 0x4E, 0x90, 0x8A,
++0xDE, 0xE0, 0xFF, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x8B, 0x1A, 0x8A, 0x1B, 0x89,
++0x1C, 0x90, 0x8B, 0x3F, 0x12, 0x43, 0x8B, 0xAB, 0x1D, 0xAA, 0x1E, 0xA9, 0x1F, 0x90, 0x8B, 0x42,
++0x12, 0x43, 0x8B, 0xAF, 0x20, 0x15, 0x20, 0xEF, 0x60, 0x1E, 0x90, 0x8B, 0x42, 0xE4, 0x75, 0xF0,
++0x01, 0x12, 0x43, 0x74, 0x12, 0x29, 0xD9, 0xFF, 0x90, 0x8B, 0x3F, 0xE4, 0x75, 0xF0, 0x01, 0x12,
++0x43, 0x74, 0xEF, 0x12, 0x42, 0x4D, 0x80, 0xDB, 0xAB, 0x1A, 0xAA, 0x1B, 0xA9, 0x1C, 0xD0, 0xD0,
++0x92, 0xAF, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8B, 0x45, 0x12, 0x43, 0x8B,
++0x90, 0x8B, 0x53, 0xE0, 0xFF, 0x04, 0xF0, 0x90, 0x00, 0x01, 0xEF, 0x12, 0x42, 0x5F, 0x7F, 0xAF,
++0x7E, 0x01, 0x12, 0x74, 0x3B, 0xEF, 0x60, 0x47, 0x90, 0x8B, 0x45, 0x12, 0x43, 0x6B, 0x8B, 0x1D,
++0x8A, 0x1E, 0x89, 0x1F, 0x75, 0x20, 0x02, 0x7B, 0x01, 0x7A, 0x01, 0x79, 0xA0, 0xD1, 0xE4, 0x90,
++0x8B, 0x48, 0x12, 0x43, 0x6B, 0x8B, 0x1D, 0x8A, 0x1E, 0x89, 0x1F, 0x90, 0x8B, 0x45, 0x12, 0x43,
++0x6B, 0x12, 0x29, 0xD9, 0xFF, 0xC4, 0x54, 0x0F, 0xF5, 0x20, 0x7B, 0x01, 0x7A, 0x01, 0x79, 0xA2,
++0xD1, 0xE4, 0x90, 0x01, 0xAF, 0x74, 0xFF, 0xF0, 0x90, 0x01, 0xCB, 0xE0, 0x64, 0x80, 0xF0, 0xD0,
++0xD0, 0x92, 0xAF, 0x22, 0x90, 0x8A, 0xC5, 0xE0, 0x54, 0xF0, 0x44, 0x03, 0xF0, 0x54, 0x0F, 0x44,
++0x80, 0xF0, 0x7B, 0x00, 0x7A, 0x00, 0x79, 0x56, 0x90, 0x8B, 0x48, 0x12, 0x43, 0x8B, 0x0B, 0x7A,
++0x8A, 0x79, 0xC5, 0xE1, 0x33, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x01, 0xC4, 0x74,
++0xC5, 0xF0, 0x74, 0x5F, 0xA3, 0xF0, 0x90, 0x04, 0x1D, 0xE0, 0x60, 0x1A, 0x90, 0x05, 0x22, 0xE0,
++0x54, 0x90, 0x60, 0x07, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x40, 0xF0, 0x90, 0x01, 0xC7, 0xE0, 0x30,
++0xE1, 0xE4, 0x7F, 0x00, 0x80, 0x02, 0x7F, 0x01, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xD3, 0x10, 0xAF,
++0x01, 0xC3, 0xC0, 0xD0, 0xE4, 0xFB, 0xFA, 0xEF, 0x30, 0xE0, 0x02, 0x7B, 0x80, 0xEF, 0xC3, 0x13,
++0x90, 0xFD, 0x10, 0xF0, 0x90, 0x04, 0x25, 0xEF, 0xF0, 0xED, 0x60, 0x1E, 0xAF, 0x03, 0x74, 0x0F,
++0x2F, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x80, 0xF0, 0x74, 0x10, 0x2F, 0xF5,
++0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x80, 0xF0, 0xAF, 0x03, 0x74, 0x08, 0x2F, 0xF5,
++0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE4, 0xF0, 0x74, 0x09, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0xFC,
++0xF5, 0x83, 0xE0, 0x54, 0xF0, 0xF0, 0x74, 0x21, 0x2B, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83,
++0xE0, 0x54, 0xF7, 0xF0, 0xAE, 0x02, 0xAF, 0x03, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x12, 0x5F, 0xC5,
++0xBF, 0x01, 0x10, 0x90, 0x02, 0x09, 0xE0, 0xFF, 0x7D, 0x01, 0x12, 0x5F, 0xFD, 0x90, 0x04, 0x1F,
++0x74, 0x20, 0xF0, 0x22, 0x90, 0x01, 0x02, 0xE0, 0x54, 0x03, 0xFF, 0xE0, 0x54, 0x0C, 0x13, 0x13,
++0x54, 0x3F, 0xFE, 0xEF, 0x64, 0x01, 0x60, 0x04, 0xEF, 0xB4, 0x03, 0x0E, 0x90, 0x8A, 0xC5, 0x74,
++0x01, 0xF0, 0xA3, 0x74, 0x37, 0xF0, 0x79, 0x01, 0x80, 0x18, 0xEE, 0x64, 0x01, 0x60, 0x07, 0xAF,
++0x06, 0xEE, 0x64, 0x03, 0x70, 0x3B, 0x90, 0x8A, 0xC5, 0x74, 0x01, 0xF0, 0xA3, 0x74, 0x3D, 0xF0,
++0x79, 0x40, 0x90, 0x8A, 0xC5, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0xF5, 0x82, 0x8E, 0x83, 0xE0, 0x59,
++0x60, 0x08, 0xE9, 0xF0, 0xE4, 0x90, 0x8A, 0xF6, 0xF0, 0x22, 0x90, 0x8A, 0xF6, 0xE0, 0x04, 0xF0,
++0xE0, 0xC3, 0x94, 0x0A, 0x40, 0x0B, 0xE4, 0xF0, 0x90, 0x04, 0x19, 0xE0, 0x30, 0xE0, 0x02, 0x11,
++0x6D, 0x22, 0xC0, 0xE0, 0xC0, 0xF0, 0xC0, 0x83, 0xC0, 0x82, 0xC0, 0xD0, 0x75, 0xD0, 0x00, 0xC0,
++0x00, 0xC0, 0x01, 0xC0, 0x02, 0xC0, 0x03, 0xC0, 0x04, 0xC0, 0x05, 0xC0, 0x06, 0xC0, 0x07, 0x90,
++0x01, 0xC4, 0x74, 0xF2, 0xF0, 0x74, 0x60, 0xA3, 0xF0, 0x90, 0x01, 0x34, 0xE0, 0x55, 0x28, 0xF5,
++0x2C, 0xA3, 0xE0, 0x55, 0x29, 0xF5, 0x2D, 0xA3, 0xE0, 0x55, 0x2A, 0xF5, 0x2E, 0xA3, 0xE0, 0x55,
++0x2B, 0xF5, 0x2F, 0xE5, 0x2C, 0x20, 0xE0, 0x02, 0x41, 0x89, 0x90, 0x01, 0x34, 0x74, 0x01, 0xF0,
++0x85, 0xD1, 0x4D, 0x85, 0xD2, 0x4E, 0x85, 0xD3, 0x4F, 0x85, 0xD4, 0x50, 0x85, 0xD5, 0x51, 0x85,
++0xD6, 0x52, 0x85, 0xD7, 0x53, 0x85, 0xD9, 0x54, 0xE5, 0x54, 0x54, 0x40, 0xC3, 0x13, 0xFF, 0xE5,
++0x53, 0x54, 0x20, 0x6F, 0x70, 0x02, 0x41, 0x46, 0xE5, 0x54, 0x30, 0xE5, 0x02, 0x41, 0x46, 0xE5,
++0x52, 0x54, 0x1F, 0xF5, 0x08, 0xE5, 0x4D, 0x54, 0x3F, 0xF5, 0x09, 0xE5, 0x51, 0x54, 0x1F, 0xFF,
++0xE5, 0x08, 0x25, 0xE0, 0x24, 0xE3, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE4, 0x8F, 0xF0,
++0x12, 0x42, 0x81, 0xE5, 0x53, 0x54, 0x1F, 0xFF, 0xE5, 0x08, 0x25, 0xE0, 0x24, 0xC0, 0xF5, 0x82,
++0xE4, 0x34, 0x85, 0xF5, 0x83, 0xE4, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xE5, 0x09, 0xD3, 0x94, 0x04,
++0x40, 0x03, 0x75, 0x09, 0x04, 0x75, 0xF0, 0x0A, 0xE5, 0x08, 0x90, 0x84, 0x00, 0x12, 0x43, 0x5F,
++0x75, 0xF0, 0x02, 0xE5, 0x09, 0x12, 0x43, 0x5F, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0xE5, 0x53, 0x54,
++0x1F, 0x2F, 0xFF, 0xE4, 0x3E, 0xFE, 0x75, 0xF0, 0x0A, 0xE5, 0x08, 0x90, 0x84, 0x00, 0x12, 0x43,
++0x5F, 0x75, 0xF0, 0x02, 0xE5, 0x09, 0x12, 0x43, 0x5F, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0xE5, 0x54,
++0x20, 0xE6, 0x24, 0xE5, 0x53, 0x54, 0x1F, 0xFF, 0xE5, 0x08, 0x25, 0xE0, 0x24, 0x63, 0xF5, 0x82,
++0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE4, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xE5, 0x4F, 0x30, 0xE7, 0x36,
++0xAF, 0x08, 0x12, 0x5C, 0xC3, 0x80, 0x2F, 0xE5, 0x53, 0x54, 0x1F, 0xFF, 0xE5, 0x08, 0x25, 0xE0,
++0x24, 0xA3, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE4, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xE5,
++0x4F, 0x30, 0xE7, 0x12, 0xE5, 0x4F, 0x54, 0x7F, 0xFD, 0xE5, 0x53, 0x54, 0x1F, 0xF5, 0x0D, 0xAB,
++0x09, 0xAF, 0x08, 0x12, 0x5C, 0x66, 0xE5, 0x24, 0x14, 0x24, 0xFD, 0x50, 0x02, 0x80, 0x3A, 0x90,
++0x8B, 0x1A, 0xE0, 0x60, 0x2B, 0x90, 0x01, 0x5B, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x04, 0xF0,
++0x12, 0x4B, 0x34, 0xEF, 0x64, 0x01, 0x70, 0x21, 0x90, 0x8B, 0x3D, 0x12, 0x4B, 0x5C, 0x90, 0x01,
++0x5B, 0x74, 0x05, 0xF0, 0x90, 0x06, 0x92, 0x74, 0x01, 0xF0, 0x90, 0x8B, 0x18, 0xF0, 0x80, 0x09,
++0x12, 0x4B, 0x34, 0xBF, 0x01, 0x03, 0x12, 0x4A, 0xFC, 0xE5, 0x2C, 0x30, 0xE1, 0x21, 0x90, 0x01,
++0x34, 0x74, 0x02, 0xF0, 0x85, 0xD1, 0x56, 0x85, 0xD2, 0x57, 0x85, 0xD3, 0x58, 0x85, 0xD4, 0x59,
++0x85, 0xD5, 0x5A, 0x85, 0xD6, 0x5B, 0x85, 0xD7, 0x5C, 0x85, 0xD9, 0x5D, 0x12, 0x5F, 0xA4, 0xE5,
++0x2C, 0x30, 0xE3, 0x06, 0x90, 0x01, 0x34, 0x74, 0x08, 0xF0, 0xE5, 0x2C, 0x30, 0xE4, 0x09, 0x90,
++0x01, 0x34, 0x74, 0x10, 0xF0, 0x43, 0x55, 0x10, 0xE5, 0x2C, 0x30, 0xE5, 0x26, 0x90, 0x01, 0xCF,
++0xE0, 0x30, 0xE5, 0x1F, 0xE0, 0x54, 0xDF, 0xF0, 0x90, 0x01, 0x34, 0x74, 0x20, 0xF0, 0x75, 0xA8,
++0x00, 0x75, 0xE8, 0x00, 0x12, 0x51, 0x9D, 0x90, 0x00, 0x03, 0xE0, 0x54, 0xFB, 0xF0, 0x12, 0x52,
++0x0E, 0x80, 0xFE, 0xE5, 0x2C, 0x30, 0xE6, 0x2D, 0x90, 0x01, 0x34, 0x74, 0x40, 0xF0, 0x90, 0x8B,
++0x32, 0xE0, 0x30, 0xE0, 0x0C, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x05, 0x90, 0x8B, 0x34, 0xE4,
++0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0xFF, 0x30, 0xE0, 0x0C, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x05,
++0x90, 0x8B, 0x2E, 0xE4, 0xF0, 0xE5, 0x2E, 0x20, 0xE0, 0x02, 0x61, 0xE6, 0x90, 0x8B, 0x08, 0x74,
++0x01, 0xF0, 0x90, 0x01, 0x36, 0xF0, 0x90, 0x8B, 0x06, 0xE0, 0x60, 0x0F, 0xE4, 0xF0, 0x90, 0x05,
++0x53, 0xE0, 0x44, 0x02, 0xF0, 0x90, 0x05, 0xFC, 0xE0, 0x04, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0x30,
++0xE0, 0x2F, 0x90, 0x8B, 0x37, 0x74, 0x01, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0xFF, 0x13, 0x13, 0x54,
++0x3F, 0x30, 0xE0, 0x1D, 0x90, 0x8B, 0x34, 0x74, 0x01, 0xF0, 0xB1, 0x39, 0x90, 0x8B, 0x33, 0xE0,
++0x64, 0x03, 0x60, 0x0D, 0x7F, 0x01, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x05, 0x7F, 0x04, 0x12, 0x4E,
++0x89, 0x90, 0x8B, 0x2C, 0xE0, 0xFF, 0x30, 0xE0, 0x55, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x4E,
++0x90, 0x8B, 0x2E, 0x74, 0x01, 0xF0, 0xB1, 0x39, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x3E,
++0xB1, 0x5F, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x90, 0x8B, 0x2D, 0xE0, 0xFF, 0x64, 0x06, 0x60,
++0x2D, 0xEF, 0xB4, 0x04, 0x02, 0x80, 0x07, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x04, 0xE4, 0xFF,
++0x80, 0x14, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x03, 0x04, 0x7F, 0x01, 0x80, 0x09, 0x90, 0x8B, 0x2D,
++0xE0, 0xB4, 0x02, 0x04, 0x7F, 0x01, 0xB1, 0x82, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x12, 0x43,
++0xE7, 0x90, 0x8B, 0x08, 0xE4, 0xF0, 0xE5, 0x2E, 0x30, 0xE1, 0x2F, 0x90, 0x01, 0x36, 0x74, 0x02,
++0xF0, 0x43, 0x55, 0x40, 0x11, 0x84, 0x90, 0x8B, 0x37, 0xE0, 0xB4, 0x01, 0x09, 0x90, 0x05, 0x22,
++0xE4, 0xF0, 0x90, 0x8B, 0x37, 0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x0D, 0xE4, 0xFF, 0x12,
++0x4D, 0xE0, 0xEF, 0x60, 0x05, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0xE5, 0x2E, 0x30, 0xE2, 0x16, 0x90,
++0x01, 0x36, 0x74, 0x04, 0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x06, 0xA3, 0xE0, 0x64, 0x06,
++0x60, 0x03, 0x12, 0x46, 0xB3, 0xE5, 0x2E, 0x30, 0xE3, 0x38, 0x90, 0x01, 0x36, 0x74, 0x08, 0xF0,
++0xE5, 0x21, 0x64, 0x01, 0x70, 0x2C, 0xE5, 0x24, 0x60, 0x28, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90,
++0x01, 0x3C, 0x74, 0x02, 0xF0, 0x90, 0x8B, 0x3D, 0xE4, 0xF0, 0x90, 0x8B, 0x11, 0xE0, 0x90, 0x8B,
++0x3E, 0xF0, 0xE4, 0xFB, 0xFD, 0x7F, 0x54, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x57, 0x74,
++0x05, 0xF0, 0xE5, 0x2E, 0x30, 0xE4, 0x2B, 0x90, 0x01, 0x36, 0x74, 0x10, 0xF0, 0xE5, 0x21, 0xB4,
++0x01, 0x20, 0xE5, 0x24, 0x60, 0x1C, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x02,
++0xF0, 0x90, 0x8B, 0x1B, 0xE4, 0xF0, 0x53, 0x25, 0xFD, 0xE5, 0x25, 0x54, 0x07, 0x70, 0x03, 0x12,
++0x4A, 0xFC, 0xE5, 0x2E, 0x30, 0xE5, 0x1F, 0x90, 0x01, 0x36, 0x74, 0x20, 0xF0, 0xE5, 0x21, 0xB4,
++0x01, 0x14, 0xE5, 0x24, 0x60, 0x10, 0x90, 0x8B, 0x1A, 0xE0, 0x64, 0x02, 0x60, 0x05, 0x12, 0x4A,
++0x97, 0x80, 0x03, 0x12, 0x49, 0x49, 0xE5, 0x2E, 0x30, 0xE6, 0x1B, 0x90, 0x01, 0x36, 0x74, 0x40,
++0xF0, 0xE5, 0x21, 0xB4, 0x01, 0x10, 0xE5, 0x24, 0x60, 0x0C, 0x53, 0x25, 0xFE, 0xE5, 0x25, 0x54,
++0x07, 0x70, 0x03, 0x12, 0x4A, 0xFC, 0xE5, 0x2F, 0x30, 0xE1, 0x28, 0x90, 0x01, 0x37, 0x74, 0x02,
++0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x18, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x08,
++0x12, 0x48, 0xFE, 0x12, 0x7D, 0xC1, 0x80, 0x0B, 0x90, 0x8B, 0x31, 0x74, 0x01, 0xF0, 0x80, 0x03,
++0x12, 0x48, 0xFE, 0x74, 0xF2, 0x04, 0x90, 0x01, 0xC4, 0xF0, 0x74, 0x60, 0xA3, 0xF0, 0xD0, 0x07,
++0xD0, 0x06, 0xD0, 0x05, 0xD0, 0x04, 0xD0, 0x03, 0xD0, 0x02, 0xD0, 0x01, 0xD0, 0x00, 0xD0, 0xD0,
++0xD0, 0x82, 0xD0, 0x83, 0xD0, 0xF0, 0xD0, 0xE0, 0x32, 0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x05,
++0x58, 0xE0, 0xFF, 0x90, 0x8B, 0x38, 0xE0, 0x2F, 0x24, 0xFE, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB,
++0xFD, 0x7F, 0x50, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x53, 0x74, 0x05, 0xF0, 0x22, 0x90,
++0x8B, 0x2C, 0xE0, 0xFF, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x30, 0xE0, 0x0A, 0xA3, 0xE0, 0x64, 0x06,
++0x60, 0x04, 0x7F, 0x06, 0xB1, 0x82, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x06, 0x60, 0x03, 0x12, 0x78,
++0x35, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0x6F, 0x70,
++0x02, 0xE1, 0x4E, 0xEF, 0x12, 0x43, 0x94, 0x65, 0xB0, 0x00, 0x65, 0xEA, 0x01, 0x66, 0x30, 0x02,
++0x66, 0x6A, 0x03, 0x66, 0xA2, 0x04, 0x66, 0xDB, 0x05, 0x67, 0x16, 0x06, 0x00, 0x00, 0x67, 0x4E,
++0xEE, 0xB4, 0x04, 0x06, 0x7F, 0x01, 0xF1, 0x81, 0xE1, 0x4E, 0x90, 0x8B, 0x2D, 0xE0, 0xFF, 0xB4,
++0x05, 0x04, 0xF1, 0x5D, 0xE1, 0x4E, 0xEF, 0xB4, 0x06, 0x06, 0x7F, 0x01, 0xF1, 0x72, 0x80, 0x16,
++0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x03, 0x06, 0x7F, 0x01, 0xF1, 0x53, 0x80, 0x09, 0x90, 0x8B, 0x2D,
++0xE0, 0xB4, 0x02, 0x02, 0xF1, 0x67, 0xF1, 0xA4, 0xE1, 0x4E, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04,
++0x06, 0x7F, 0x01, 0xF1, 0x81, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x02, 0xF1, 0x5D,
++0x90, 0x8B, 0x2D, 0xE0, 0x70, 0x04, 0xF1, 0x9A, 0xE1, 0x4E, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0xB4,
++0x06, 0x06, 0x7F, 0x01, 0xF1, 0x72, 0xE1, 0x4E, 0xEE, 0xB4, 0x03, 0x06, 0x7F, 0x01, 0xF1, 0x53,
++0xE1, 0x4E, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x02, 0x60, 0x02, 0xE1, 0x4E, 0xF1, 0x67, 0xE1, 0x4E,
++0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04, 0x06, 0x7F, 0x01, 0xF1, 0x81, 0x80, 0x09, 0x90, 0x8B, 0x2D,
++0xE0, 0xB4, 0x05, 0x02, 0xF1, 0x5D, 0x90, 0x8B, 0x2D, 0xE0, 0x70, 0x04, 0xF1, 0x9A, 0x80, 0x16,
++0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0xB4, 0x06, 0x06, 0x7F, 0x01, 0xF1, 0x72, 0x80, 0x08, 0xEE, 0xB4,
++0x03, 0x04, 0x7F, 0x01, 0xF1, 0x53, 0xF1, 0xD0, 0xE1, 0x4E, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04,
++0x06, 0x7F, 0x01, 0xF1, 0x81, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x02, 0xF1, 0x5D,
++0x90, 0x8B, 0x2D, 0xE0, 0x70, 0x04, 0xF1, 0x9A, 0x80, 0x14, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0xB4,
++0x06, 0x06, 0xE4, 0xFF, 0xF1, 0x72, 0x80, 0x06, 0xEE, 0xB4, 0x02, 0x02, 0xF1, 0x67, 0xF1, 0xB9,
++0xE1, 0x4E, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0xB4, 0x06, 0x06, 0xE4, 0xFF, 0xF1, 0x72, 0x80, 0x13,
++0xEE, 0xB4, 0x03, 0x06, 0x7F, 0x01, 0xF1, 0x53, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02,
++0x02, 0xF1, 0x67, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x01, 0x04, 0xF1, 0xA4, 0x80, 0x09, 0x90, 0x8B,
++0x2D, 0xE0, 0xB4, 0x05, 0x02, 0xF1, 0x5D, 0xF1, 0xAF, 0x80, 0x73, 0x90, 0x8B, 0x2D, 0xE0, 0xFE,
++0xB4, 0x06, 0x06, 0xE4, 0xFF, 0xF1, 0x72, 0x80, 0x13, 0xEE, 0xB4, 0x03, 0x06, 0x7F, 0x01, 0xF1,
++0x53, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02, 0x02, 0xF1, 0x67, 0x90, 0x8B, 0x2D, 0xE0,
++0xB4, 0x01, 0x04, 0xF1, 0xA4, 0x80, 0x0B, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04, 0x04, 0x7F, 0x01,
++0xF1, 0x81, 0xF1, 0xC3, 0x80, 0x38, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04, 0x06, 0x7F, 0x01, 0xF1,
++0x81, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x02, 0xF1, 0x5D, 0x90, 0x8B, 0x2D, 0xE0,
++0x70, 0x04, 0xF1, 0x9A, 0x80, 0x16, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x03, 0x06, 0xE4, 0xFF, 0xF1,
++0x53, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02, 0x02, 0xF1, 0x67, 0xF1, 0xDD, 0xD0, 0xD0,
++0x92, 0xAF, 0x22, 0x12, 0x4A, 0xB2, 0x90, 0x8B, 0x2D, 0x74, 0x01, 0xF0, 0x22, 0x90, 0x05, 0x22,
++0xE4, 0xF0, 0x90, 0x8B, 0x2D, 0xF0, 0x22, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x2D, 0x04,
++0xF0, 0x22, 0xEF, 0x60, 0x05, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x2D, 0x74, 0x01, 0xF0,
++0x22, 0x90, 0x8B, 0x56, 0xEF, 0xF0, 0x12, 0x7D, 0x42, 0x90, 0x8B, 0x56, 0xE0, 0x60, 0x05, 0x90,
++0x05, 0x22, 0xE4, 0xF0, 0xE4, 0x90, 0x8B, 0x2D, 0xF0, 0x22, 0x12, 0x4A, 0xCC, 0x90, 0x8B, 0x2D,
++0x74, 0x01, 0xF0, 0x22, 0x7F, 0x01, 0x12, 0x4A, 0x7C, 0xE4, 0x90, 0x8B, 0x2D, 0xF0, 0x22, 0x12,
++0x7C, 0x4A, 0x90, 0x8B, 0x2D, 0x74, 0x04, 0xF0, 0x22, 0x12, 0x4A, 0x32, 0x90, 0x8B, 0x2D, 0x74,
++0x03, 0xF0, 0x22, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x90, 0x8B, 0x2D, 0x74, 0x05, 0xF0, 0x22,
++0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x90, 0x8B, 0x2D, 0x74, 0x02, 0xF0, 0x22, 0x90, 0x05, 0x22,
++0x74, 0x6F, 0xF0, 0x90, 0x8B, 0x2D, 0x74, 0x06, 0xF0, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0,
++0xD0, 0xE4, 0xFD, 0xFC, 0xEF, 0x30, 0xE0, 0x02, 0x7D, 0x80, 0xEF, 0xC3, 0x13, 0x90, 0xFD, 0x10,
++0xF0, 0xAE, 0x04, 0xAF, 0x05, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x75, 0x28, 0x33, 0xE4, 0xF5, 0x29,
++0x75, 0x2A, 0x07, 0xF5, 0x2B, 0x90, 0x01, 0x30, 0xE5, 0x28, 0xF0, 0xA3, 0xE5, 0x29, 0xF0, 0xA3,
++0xE5, 0x2A, 0xF0, 0xA3, 0xE5, 0x2B, 0xF0, 0x22, 0x75, 0x30, 0x1F, 0x75, 0x31, 0x01, 0x43, 0x31,
++0x10, 0xE4, 0xF5, 0x32, 0x90, 0x01, 0x38, 0xE5, 0x30, 0xF0, 0xA3, 0xE5, 0x31, 0xF0, 0xA3, 0xE5,
++0x32, 0xF0, 0x22, 0x22, 0x90, 0x00, 0x02, 0xE0, 0x54, 0xE0, 0x7F, 0x01, 0x60, 0x02, 0x7F, 0x00,
++0x22, 0x90, 0x00, 0xF3, 0xE0, 0x7F, 0x00, 0x30, 0xE3, 0x02, 0x7F, 0x01, 0x22, 0x90, 0x8B, 0x09,
++0xE0, 0xB4, 0x01, 0x0C, 0x90, 0x00, 0xF2, 0xE0, 0x30, 0xE7, 0x05, 0x7E, 0xFD, 0x7F, 0x33, 0x22,
++0x7E, 0xFD, 0x7F, 0x2F, 0x22, 0x90, 0x00, 0xF3, 0xE0, 0x30, 0xE2, 0x0D, 0x90, 0x05, 0x41, 0x74,
++0x10, 0xF0, 0x90, 0x05, 0x5A, 0xF0, 0xA3, 0xE4, 0xF0, 0x22, 0x90, 0x01, 0x64, 0x74, 0xA0, 0xF0,
++0x22, 0xC0, 0xE0, 0xC0, 0x83, 0xC0, 0x82, 0xC0, 0xD0, 0x75, 0xD0, 0x00, 0xC0, 0x05, 0xC0, 0x06,
++0xC0, 0x07, 0x7D, 0x91, 0x90, 0x01, 0xC4, 0xED, 0xF0, 0x74, 0x68, 0xFF, 0xA3, 0xF0, 0x53, 0x91,
++0xEF, 0x90, 0x00, 0x51, 0xE0, 0xFE, 0x90, 0x00, 0x55, 0xE0, 0x5E, 0xF5, 0x3D, 0x90, 0x00, 0x52,
++0xE0, 0xFE, 0x90, 0x00, 0x56, 0xE0, 0x5E, 0xF5, 0x3E, 0xE5, 0x3D, 0x30, 0xE4, 0x06, 0x90, 0x00,
++0x55, 0x74, 0x10, 0xF0, 0xE5, 0x3D, 0x30, 0xE5, 0x06, 0x90, 0x00, 0x55, 0x74, 0x20, 0xF0, 0xE5,
++0x3D, 0x30, 0xE6, 0x06, 0x90, 0x00, 0x55, 0x74, 0x40, 0xF0, 0xE5, 0x3D, 0x30, 0xE7, 0x06, 0x90,
++0x00, 0x55, 0x74, 0x80, 0xF0, 0xE5, 0x3E, 0x30, 0xE0, 0x06, 0x90, 0x00, 0x56, 0x74, 0x01, 0xF0,
++0xE5, 0x3E, 0x30, 0xE1, 0x06, 0x90, 0x00, 0x56, 0x74, 0x02, 0xF0, 0xE5, 0x3E, 0x30, 0xE2, 0x06,
++0x90, 0x00, 0x56, 0x74, 0x04, 0xF0, 0xE5, 0x3E, 0x30, 0xE3, 0x06, 0x90, 0x00, 0x56, 0x74, 0x08,
++0xF0, 0x90, 0x01, 0xC4, 0xED, 0xF0, 0xA3, 0xEF, 0xF0, 0xD0, 0x07, 0xD0, 0x06, 0xD0, 0x05, 0xD0,
++0xD0, 0xD0, 0x82, 0xD0, 0x83, 0xD0, 0xE0, 0x32, 0xEF, 0xC3, 0x94, 0x20, 0x50, 0x39, 0xEF, 0x30,
++0xE0, 0x17, 0xED, 0xC4, 0x54, 0xF0, 0xFD, 0xEF, 0xC3, 0x13, 0xFE, 0x24, 0xA4, 0xF5, 0x82, 0xE4,
++0x34, 0x04, 0xF5, 0x83, 0xE0, 0x54, 0x0F, 0x80, 0x10, 0xEF, 0xC3, 0x13, 0xFE, 0x24, 0xA4, 0xF5,
++0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE0, 0x54, 0xF0, 0xF0, 0x74, 0xA4, 0x2E, 0xF5, 0x82, 0xE4,
++0x34, 0x04, 0xF5, 0x83, 0xE0, 0x4D, 0xF0, 0x22, 0xAD, 0x07, 0x74, 0x84, 0x2D, 0xF5, 0x82, 0xE4,
++0x34, 0x04, 0xF5, 0x83, 0xE0, 0x54, 0x7F, 0x90, 0x8A, 0xDE, 0xF0, 0xE0, 0xF9, 0x54, 0x1F, 0xA3,
++0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x27, 0x12, 0x43, 0x5F, 0xE0, 0xFF, 0x90, 0x8A, 0xE1,
++0xF0, 0xED, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0xFB, 0xA3,
++0xE0, 0x90, 0x8A, 0xE2, 0xCB, 0xF0, 0xA3, 0xEB, 0xF0, 0xED, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82,
++0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFB, 0xA3, 0xE0, 0x90, 0x8A, 0xE4, 0xCB, 0xF0, 0xA3, 0xEB,
++0xF0, 0x90, 0x8A, 0xDF, 0xE0, 0xFE, 0x25, 0xE0, 0x24, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5,
++0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xED, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4,
++0x34, 0x86, 0xF5, 0x83, 0xEA, 0xF0, 0xA3, 0xEB, 0xF0, 0xEE, 0xC3, 0x9F, 0x40, 0x02, 0x41, 0xB9,
++0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74, 0xA5, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEF,
++0xF0, 0xEF, 0x04, 0x90, 0x8A, 0xE0, 0xF0, 0x90, 0x8A, 0xE1, 0xE0, 0xFF, 0x90, 0x8A, 0xE0, 0xE0,
++0xFE, 0xD3, 0x9F, 0x40, 0x02, 0x41, 0xF3, 0xEE, 0xC3, 0x94, 0x10, 0x40, 0x21, 0xEE, 0x24, 0xF0,
++0xFF, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8,
++0xF9, 0xFF, 0x90, 0x8A, 0xE2, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x70, 0x27, 0x90, 0x8A,
++0xE0, 0xE0, 0xFF, 0xC3, 0x94, 0x10, 0x50, 0x59, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80,
++0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0x90, 0x8A, 0xE4, 0xE0, 0x5E, 0xFE, 0xA3,
++0xE0, 0x5F, 0x4E, 0x60, 0x3C, 0x90, 0x8A, 0xE0, 0xE0, 0xB4, 0x11, 0x0D, 0x90, 0x8A, 0xE3, 0xE0,
++0x30, 0xE7, 0x06, 0x90, 0x8A, 0xE0, 0x74, 0x17, 0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0xFF, 0x64, 0x13,
++0x60, 0x04, 0xEF, 0xB4, 0x12, 0x0D, 0x90, 0x8A, 0xE2, 0xE0, 0x30, 0xE0, 0x06, 0x90, 0x8A, 0xE0,
++0x74, 0x18, 0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0x90, 0x8A, 0xDF, 0xF0, 0x90, 0x8A, 0xDE, 0xF0, 0x80,
++0x42, 0x90, 0x8A, 0xE0, 0xE0, 0x04, 0xF0, 0x41, 0x17, 0x90, 0x8A, 0xE1, 0xE0, 0xFC, 0x90, 0x8A,
++0xDF, 0xE0, 0xFF, 0x6C, 0x70, 0x71, 0x74, 0xA5, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83,
++0xEF, 0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x29, 0x12, 0x43, 0x5F, 0xE0, 0xB4, 0x01, 0x10,
++0xE9, 0x20, 0xE6, 0x0C, 0x90, 0x8A, 0xDF, 0xE0, 0x44, 0x40, 0x90, 0x8A, 0xDE, 0xF0, 0x80, 0x03,
++0xAF, 0x01, 0x22, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0x66, 0xF5, 0x82, 0xE4, 0x34,
++0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xEF, 0x25, 0xE0, 0x24, 0x2E, 0xF5,
++0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0x74, 0x01, 0x93, 0x2B, 0xFF, 0xE4, 0x93, 0x3A, 0xC3, 0x13,
++0xFE, 0xEF, 0x13, 0xFF, 0xED, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83,
++0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0x80, 0x66, 0x90, 0x8A, 0xDF, 0xE0, 0xD3, 0x9C, 0x40, 0x5E, 0x90,
++0x8A, 0xE1, 0xE0, 0xFF, 0x74, 0xA5, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEF, 0xF0,
++0x90, 0x8A, 0xDF, 0xEF, 0xF0, 0x90, 0x8A, 0xDE, 0xF0, 0xFC, 0xA3, 0xE0, 0xFF, 0x25, 0xE0, 0x24,
++0x66, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xEF,
++0x25, 0xE0, 0x24, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0x74, 0x01, 0x93, 0x2B, 0xFF,
++0xE4, 0x93, 0x3A, 0xC3, 0x13, 0xFE, 0xEF, 0x13, 0xFF, 0xED, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82,
++0xE4, 0x34, 0x86, 0xF5, 0x83, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0xAF, 0x04, 0x22, 0x74, 0x01, 0x2D,
++0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE4, 0xF0, 0xAF, 0x05, 0x90, 0x8A, 0xDE, 0xE0, 0x44,
++0x80, 0xFD, 0x12, 0x5C, 0x4E, 0x90, 0x8A, 0xDE, 0xE0, 0x44, 0x80, 0xFF, 0x22, 0xE4, 0x90, 0x8A,
++0xCF, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0xC3, 0x94, 0x20, 0x40, 0x03, 0x02, 0x72, 0x54, 0x75,
++0xF0, 0x09, 0xEF, 0x90, 0x87, 0x2A, 0x12, 0x43, 0x5F, 0xE0, 0x64, 0x01, 0x60, 0x03, 0x02, 0x72,
++0x4B, 0x90, 0x8A, 0xCF, 0xE0, 0x25, 0xE0, 0x24, 0xC0, 0xF5, 0x82, 0xE4, 0x34, 0x85, 0xF5, 0x83,
++0xE0, 0xFC, 0xA3, 0xE0, 0xD3, 0x94, 0x00, 0xEC, 0x94, 0x00, 0x50, 0x03, 0x02, 0x72, 0x4B, 0xEF,
++0x75, 0xF0, 0x0A, 0xA4, 0x24, 0x00, 0xF9, 0x74, 0x84, 0x35, 0xF0, 0x75, 0x12, 0x01, 0xF5, 0x13,
++0x89, 0x14, 0x90, 0x8A, 0xCF, 0xE0, 0x25, 0xE0, 0x24, 0xC0, 0xF5, 0x82, 0xE4, 0x34, 0x85, 0xF5,
++0x83, 0xE0, 0xFD, 0xA3, 0xE0, 0x90, 0x8A, 0xD4, 0xCD, 0xF0, 0xA3, 0xED, 0xF0, 0xEF, 0x25, 0xE0,
++0x24, 0x63, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE0, 0xFF, 0xA3, 0xE0, 0x90, 0x8A, 0xD6,
++0xCF, 0xF0, 0xA3, 0xEF, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFE, 0x24, 0x84, 0xF5, 0x82, 0xE4, 0x34,
++0x04, 0xF5, 0x83, 0xE0, 0x54, 0x3F, 0x90, 0x8A, 0xD0, 0xF0, 0xE0, 0xFD, 0x54, 0x1F, 0xA3, 0xF0,
++0x75, 0xF0, 0x09, 0xEE, 0x90, 0x87, 0x27, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD9, 0xF0, 0x90,
++0x8A, 0xCF, 0xE0, 0xFB, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, 0xC3, 0x94,
++0x05, 0x40, 0x02, 0xC1, 0x9C, 0x90, 0x8A, 0xD9, 0xE0, 0xFE, 0x90, 0x8A, 0xD1, 0xE0, 0x9E, 0x40,
++0x13, 0x90, 0x8A, 0xD9, 0xE0, 0x90, 0x8A, 0xD1, 0xF0, 0xED, 0x54, 0x40, 0xFD, 0x90, 0x8A, 0xD0,
++0xF0, 0xEE, 0x4D, 0xF0, 0x90, 0x8A, 0xD1, 0xE0, 0xFF, 0x90, 0x41, 0x12, 0x93, 0xFE, 0x74, 0x23,
++0x2B, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xC3, 0x9E, 0x40, 0x06, 0xEF, 0x90, 0x40,
++0xDA, 0x80, 0x07, 0x90, 0x8A, 0xD1, 0xE0, 0x90, 0x40, 0xF6, 0x93, 0x90, 0x8A, 0xD8, 0xF0, 0x90,
++0x8A, 0xD8, 0xE0, 0x75, 0xF0, 0x06, 0xA4, 0x24, 0x50, 0xF9, 0x74, 0x40, 0x35, 0xF0, 0x75, 0x0F,
++0xFF, 0xF5, 0x10, 0x89, 0x11, 0x90, 0x8A, 0xD0, 0xE0, 0x90, 0x41, 0xBA, 0x93, 0xFF, 0xD3, 0x90,
++0x8A, 0xD7, 0xE0, 0x9F, 0x90, 0x8A, 0xD6, 0xE0, 0x94, 0x00, 0x40, 0x0D, 0x90, 0x8A, 0xCF, 0xE0,
++0xFF, 0xE4, 0xFD, 0x12, 0x5D, 0x41, 0x02, 0x71, 0xE1, 0x90, 0x8A, 0xCF, 0xE0, 0x25, 0xE0, 0x24,
++0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0xFF, 0xA3, 0xE0, 0x90, 0x8A, 0xD2, 0xCF,
++0xF0, 0xA3, 0xEF, 0xF0, 0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x12, 0x29, 0xD9, 0xFF, 0x7E, 0x00,
++0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x12, 0x42, 0x97, 0xFD, 0xAC, 0xF0, 0x12, 0x29, 0xF2, 0x90,
++0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x90, 0x00,
++0x01, 0x12, 0x42, 0x20, 0xFF, 0x7E, 0x00, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x02,
++0x12, 0x42, 0xC2, 0xFD, 0xAC, 0xF0, 0x12, 0x29, 0xF2, 0x90, 0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12,
++0x42, 0x81, 0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFF, 0x7E,
++0x00, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x04, 0x12, 0x42, 0xC2, 0xFD, 0xAC, 0xF0,
++0x12, 0x29, 0xF2, 0x90, 0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xAB, 0x0F, 0xAA, 0x10,
++0xA9, 0x11, 0x90, 0x00, 0x03, 0x12, 0x42, 0x20, 0xFF, 0x7E, 0x00, 0xAB, 0x12, 0xAA, 0x13, 0xA9,
++0x14, 0x90, 0x00, 0x06, 0x12, 0x42, 0xC2, 0xFD, 0xAC, 0xF0, 0x12, 0x29, 0xF2, 0x90, 0x8A, 0xD2,
++0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x90, 0x00, 0x04, 0x12,
++0x42, 0x20, 0xFF, 0x7E, 0x00, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x08, 0x12, 0x42,
++0xC2, 0xFD, 0xAC, 0xF0, 0x12, 0x29, 0xF2, 0x90, 0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81,
++0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x90, 0x00, 0x05, 0x12, 0x42, 0x20, 0xFF, 0x7E, 0x00, 0x90,
++0x8A, 0xD4, 0xE0, 0xFC, 0xA3, 0xE0, 0xFD, 0x12, 0x29, 0xF2, 0xD3, 0x90, 0x8A, 0xD3, 0xE0, 0x9F,
++0x90, 0x8A, 0xD2, 0xE0, 0x9E, 0x40, 0x0C, 0xA3, 0xE0, 0x9F, 0xF0, 0x90, 0x8A, 0xD2, 0xE0, 0x9E,
++0xF0, 0x80, 0x07, 0xE4, 0x90, 0x8A, 0xD2, 0xF0, 0xA3, 0xF0, 0x90, 0x8A, 0xD2, 0xE0, 0xFC, 0xA3,
++0xE0, 0xFD, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86,
++0xF5, 0x83, 0xEC, 0xF0, 0xA3, 0xED, 0xF0, 0x90, 0x8A, 0xD0, 0xE0, 0x25, 0xE0, 0x24, 0x2E, 0xF5,
++0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xD3, 0xED, 0x9B,
++0xEC, 0x9A, 0x40, 0x05, 0x31, 0x78, 0x02, 0x71, 0xAF, 0x90, 0x8A, 0xD0, 0xE0, 0x25, 0xE0, 0x24,
++0x66, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFE, 0x74, 0x01, 0x93, 0xFF, 0xC3,
++0x90, 0x8A, 0xD3, 0xE0, 0x9F, 0x90, 0x8A, 0xD2, 0xE0, 0x9E, 0x40, 0x03, 0x02, 0x71, 0xAF, 0x90,
++0x8A, 0xCF, 0xE0, 0xFF, 0x7D, 0x01, 0x12, 0x5D, 0x41, 0x02, 0x71, 0xAF, 0x90, 0x8A, 0xCF, 0xE0,
++0xFF, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, 0xFC, 0x64, 0x05, 0x60, 0x03,
++0x02, 0x70, 0x7D, 0x90, 0x87, 0x22, 0xE0, 0xFE, 0xB4, 0x03, 0x0B, 0x90, 0x8A, 0xD1, 0xE0, 0xC3,
++0x94, 0x19, 0x40, 0x3D, 0x80, 0x2E, 0xEE, 0xB4, 0x02, 0x0B, 0x90, 0x8A, 0xD1, 0xE0, 0xC3, 0x94,
++0x11, 0x40, 0x2E, 0x80, 0x1F, 0x90, 0x87, 0x22, 0xE0, 0xFE, 0xB4, 0x01, 0x0B, 0x90, 0x8A, 0xD1,
++0xE0, 0xC3, 0x94, 0x0A, 0x40, 0x1B, 0x80, 0x0C, 0xEE, 0x70, 0x11, 0x90, 0x8A, 0xD1, 0xE0, 0xC3,
++0x94, 0x03, 0x40, 0x0D, 0x90, 0x89, 0x43, 0x74, 0x01, 0xF0, 0x80, 0x05, 0xE4, 0x90, 0x89, 0x43,
++0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFE, 0x24, 0x43, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE0,
++0x90, 0x8A, 0xDD, 0xF0, 0x74, 0x23, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFE,
++0xC3, 0x94, 0x30, 0x50, 0x0B, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0x74, 0x64, 0x2F, 0x02, 0x70, 0x28,
++0x90, 0x89, 0x43, 0xE0, 0x64, 0x01, 0x60, 0x03, 0x02, 0x70, 0x1D, 0x90, 0x8A, 0xCF, 0xE0, 0x24,
++0x44, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0x64, 0x0A, 0x60, 0x5B, 0x90, 0x8A, 0xCF,
++0xE0, 0xFF, 0xEE, 0x24, 0x05, 0xFB, 0xE4, 0x33, 0xFA, 0x74, 0x21, 0x2F, 0xF5, 0x82, 0xE4, 0x34,
++0x86, 0xF5, 0x83, 0xE0, 0xFF, 0xD3, 0x9B, 0xEA, 0x64, 0x80, 0xF8, 0x74, 0x80, 0x98, 0x50, 0x38,
++0x90, 0x8A, 0xCF, 0xE0, 0xFE, 0xEF, 0x24, 0x05, 0xFB, 0xE4, 0x33, 0xFA, 0x74, 0x23, 0x2E, 0xF5,
++0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xD3, 0x9B, 0xEA, 0x64, 0x80, 0xF8, 0x74, 0x80, 0x98,
++0x50, 0x16, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x84, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0,
++0xFF, 0x90, 0x8A, 0xD1, 0xE0, 0x6F, 0x60, 0x56, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x23, 0xF5, 0x82,
++0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFF, 0xD3, 0x94, 0x42, 0x40, 0x08, 0x90, 0x8A, 0xDD, 0x74,
++0x05, 0xF0, 0x80, 0x11, 0xEF, 0xD3, 0x94, 0x39, 0x90, 0x8A, 0xDD, 0x40, 0x05, 0x74, 0x03, 0xF0,
++0x80, 0x03, 0x74, 0x01, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x24, 0x23, 0xF5, 0x82, 0xE4, 0x34,
++0x89, 0xF5, 0x83, 0xE0, 0xFE, 0x74, 0x21, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xEE,
++0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x44, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0x80, 0x2F, 0x90, 0x8A,
++0xCF, 0xE0, 0xFF, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, 0x74, 0x44,
++0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0x04, 0xF0, 0x80, 0x14, 0xE4, 0x90, 0x8A,
++0xDD, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4,
++0xF0, 0x90, 0x8A, 0xD1, 0xE0, 0xFE, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x24, 0x84, 0xF5, 0x82, 0xE4,
++0x34, 0x8A, 0xF5, 0x83, 0xEE, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0xFE, 0x74, 0x43, 0x2F, 0xF5, 0x82,
++0xE4, 0x34, 0x88, 0xF5, 0x83, 0xEE, 0xF0, 0x75, 0xF0, 0x09, 0xEF, 0x90, 0x87, 0x2B, 0x12, 0x43,
++0x5F, 0xE0, 0xB4, 0x01, 0x11, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0x74, 0x64, 0x2F, 0xF5, 0x82, 0xE4,
++0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0xFD, 0x21, 0xAC, 0xEC, 0x64, 0x06,
++0x60, 0x02, 0x21, 0xAF, 0x90, 0x8A, 0xD2, 0xF0, 0xA3, 0xF0, 0x90, 0x41, 0xDB, 0x93, 0xFF, 0x7E,
++0x00, 0x90, 0x8A, 0xD4, 0xE0, 0xFC, 0xA3, 0xE0, 0xFD, 0x12, 0x29, 0xF2, 0x90, 0x8A, 0xDB, 0xEE,
++0xF0, 0xA3, 0xEF, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x43, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5,
++0x83, 0xE0, 0x90, 0x8A, 0xDD, 0xF0, 0xE4, 0x90, 0x8A, 0xDA, 0xF0, 0x90, 0x8A, 0xDA, 0xE0, 0xFF,
++0xD3, 0x94, 0x04, 0x50, 0x47, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x75, 0xF0, 0x02, 0xEF, 0xA4,
++0xF5, 0x82, 0x85, 0xF0, 0x83, 0x12, 0x42, 0xC2, 0xFD, 0xAC, 0xF0, 0xEF, 0x90, 0x41, 0xD6, 0x93,
++0xFF, 0x7E, 0x00, 0x12, 0x29, 0xF2, 0x90, 0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0x90,
++0x8A, 0xDB, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0xD3, 0x90, 0x8A, 0xD3, 0xE0, 0x9F, 0x90, 0x8A, 0xD2,
++0xE0, 0x9E, 0x50, 0x08, 0x90, 0x8A, 0xDA, 0xE0, 0x04, 0xF0, 0x80, 0xAF, 0x90, 0x8A, 0xDA, 0xE0,
++0xC3, 0x13, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0xFF, 0xB4, 0x01, 0x0D, 0x90, 0x8A, 0xDA, 0xE0, 0x70,
++0x5D, 0x90, 0x8A, 0xDD, 0x04, 0xF0, 0x80, 0x5B, 0xEF, 0xB4, 0x03, 0x1D, 0x90, 0x8A, 0xDA, 0xE0,
++0xFF, 0x70, 0x08, 0x90, 0x8A, 0xDD, 0x74, 0x03, 0xF0, 0x80, 0x48, 0xEF, 0xB4, 0x01, 0x08, 0x90,
++0x8A, 0xDD, 0x74, 0x01, 0xF0, 0x80, 0x3C, 0x80, 0x35, 0x90, 0x8A, 0xDD, 0xE0, 0x64, 0x05, 0x70,
++0x32, 0x90, 0x8A, 0xDA, 0xE0, 0xFF, 0x70, 0x08, 0x90, 0x8A, 0xDD, 0x74, 0x05, 0xF0, 0x80, 0x0F,
++0xEF, 0x90, 0x8A, 0xDD, 0xB4, 0x01, 0x05, 0x74, 0x03, 0xF0, 0x80, 0x03, 0x74, 0x01, 0xF0, 0xD3,
++0x90, 0x8A, 0xD7, 0xE0, 0x94, 0x03, 0x90, 0x8A, 0xD6, 0xE0, 0x94, 0x00, 0x40, 0x05, 0xE4, 0x90,
++0x8A, 0xDD, 0xF0, 0xD3, 0x90, 0x8A, 0xD7, 0xE0, 0x94, 0x03, 0x90, 0x8A, 0xD6, 0xE0, 0x94, 0x00,
++0x40, 0x05, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0xFD, 0x90, 0x8A, 0xCF, 0xE0,
++0xFF, 0x24, 0x43, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xED, 0xF0, 0x12, 0x69, 0x38, 0x90,
++0x8A, 0xCF, 0xE0, 0xFF, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, 0xD3, 0x94,
++0x05, 0x50, 0x0F, 0x74, 0x64, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, 0x04, 0xF0,
++0x80, 0x0F, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4,
++0xF0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0xE4, 0xF5, 0xF0, 0x12, 0x42, 0xFA, 0xAB, 0x12, 0xAA,
++0x13, 0xA9, 0x14, 0x90, 0x00, 0x02, 0xE4, 0xF5, 0xF0, 0x12, 0x43, 0x19, 0x90, 0x00, 0x04, 0xE4,
++0xF5, 0xF0, 0x12, 0x43, 0x19, 0x90, 0x00, 0x06, 0xE4, 0xF5, 0xF0, 0x12, 0x43, 0x19, 0x90, 0x00,
++0x08, 0xE4, 0xF5, 0xF0, 0x12, 0x43, 0x19, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0xC0,
++0xF5, 0x82, 0xE4, 0x34, 0x85, 0xF5, 0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0x63,
++0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xA3,
++0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0x04,
++0xF0, 0x02, 0x6B, 0xC2, 0x22, 0xE4, 0x90, 0x8A, 0xCF, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0xC3,
++0x94, 0x10, 0x50, 0x14, 0x74, 0xA4, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE4, 0xF0,
++0x90, 0x8A, 0xCF, 0xE0, 0x04, 0xF0, 0x80, 0xE2, 0xE4, 0x90, 0x8A, 0xCF, 0xF0, 0x90, 0x8A, 0xCF,
++0xE0, 0xFF, 0xC3, 0x94, 0x20, 0x40, 0x02, 0x81, 0x0E, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x00,
++0x12, 0x43, 0x5F, 0xE4, 0xF0, 0xA3, 0xF0, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x02, 0x12, 0x43,
++0x5F, 0xE4, 0xF0, 0xA3, 0xF0, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x04, 0x12, 0x43, 0x5F, 0xE4,
++0xF0, 0xA3, 0xF0, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x06, 0x12, 0x43, 0x5F, 0xE4, 0xF0, 0xA3,
++0xF0, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x08, 0x12, 0x43, 0x5F, 0xE4, 0xF0, 0xA3, 0xF0, 0x74,
++0x84, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0x74, 0x13, 0xF0, 0x74, 0x44, 0x2F, 0xF5,
++0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE4, 0xF0, 0x74, 0x43, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x88,
++0xF5, 0x83, 0xE4, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xC0, 0xF5, 0x82, 0xE4, 0x34, 0x85, 0xF5, 0x83,
++0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0x63, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83,
++0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xE3, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83,
++0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xA3, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83,
++0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83,
++0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xA4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83,
++0xE4, 0xF0, 0xA3, 0xF0, 0x74, 0x44, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0,
++0x74, 0x24, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, 0x74, 0x64, 0x2F, 0xF5,
++0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, 0x90, 0x41, 0x8C, 0x93, 0xFE, 0x74, 0x01, 0x93,
++0xFF, 0x90, 0x41, 0x54, 0x74, 0x01, 0x93, 0x2F, 0xFF, 0xE4, 0x93, 0x3E, 0xC3, 0x13, 0xFE, 0xEF,
++0x13, 0xFF, 0x90, 0x8A, 0xCF, 0xE0, 0xFD, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86,
++0xF5, 0x83, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x29, 0x12, 0x43,
++0x5F, 0x74, 0x01, 0xF0, 0x74, 0xC1, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0x74, 0x0C,
++0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x25, 0x12, 0x43, 0x5F, 0x74, 0xFF, 0xF0, 0xA3, 0xF0,
++0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x23, 0x12, 0x43, 0x5F, 0xE4, 0xF0, 0xA3, 0x74, 0x0F, 0xF0,
++0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x27, 0x12, 0x43, 0x5F, 0x74, 0x13, 0xF0, 0x75, 0xF0, 0x09,
++0xED, 0x90, 0x87, 0x28, 0x12, 0x43, 0x5F, 0xE4, 0xF0, 0x74, 0x84, 0x2D, 0xF5, 0x82, 0xE4, 0x34,
++0x04, 0xF5, 0x83, 0x74, 0x13, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0x04, 0xF0, 0x41, 0x7D, 0x22, 0x12,
++0x29, 0xD9, 0xFF, 0xC3, 0x94, 0x20, 0x50, 0x14, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFE, 0x74,
++0x23, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xEE, 0xF0, 0x22, 0xEF, 0xB4, 0x20, 0x0A,
++0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0x90, 0x87, 0x21, 0xF0, 0x22, 0x90, 0x8B, 0x4B, 0xEE, 0xF0,
++0xA3, 0xEF, 0xF0, 0xE4, 0xA3, 0xF0, 0xA3, 0xF0, 0x90, 0x8B, 0x4B, 0xE0, 0xFE, 0xA3, 0xE0, 0xF5,
++0x82, 0x8E, 0x83, 0xE0, 0x60, 0x2C, 0xC3, 0x90, 0x8B, 0x4E, 0xE0, 0x94, 0xE8, 0x90, 0x8B, 0x4D,
++0xE0, 0x94, 0x03, 0x40, 0x0A, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x10, 0xF0, 0x7F, 0x00, 0x22, 0x90,
++0x8B, 0x4D, 0xE4, 0x75, 0xF0, 0x01, 0x12, 0x42, 0x81, 0x7F, 0x0A, 0x7E, 0x00, 0x12, 0x37, 0x54,
++0x80, 0xC6, 0x7F, 0x01, 0x22, 0x12, 0x29, 0xD9, 0xF5, 0x21, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3,
++0xC0, 0xD0, 0x90, 0x8A, 0xDA, 0x12, 0x2A, 0x8B, 0x00, 0x00, 0x00, 0x00, 0x90, 0x00, 0x01, 0x12,
++0x42, 0x20, 0x90, 0x8B, 0x1A, 0xF0, 0x90, 0x00, 0x03, 0x12, 0x42, 0x20, 0x90, 0x8B, 0x0A, 0xF0,
++0x12, 0x47, 0xFA, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFF, 0x30,
++0xE0, 0x25, 0x12, 0x29, 0xD9, 0x90, 0x8B, 0x10, 0xF0, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0x90,
++0x8B, 0x11, 0xF0, 0xEF, 0xC3, 0x13, 0x54, 0x7F, 0x90, 0x8B, 0x0F, 0xF0, 0x90, 0x00, 0x03, 0x12,
++0x42, 0x20, 0x90, 0x8B, 0x16, 0xF0, 0x22, 0x90, 0x8B, 0x10, 0x74, 0x03, 0xF0, 0x90, 0x8B, 0x11,
++0x74, 0x05, 0xF0, 0x90, 0x8B, 0x0F, 0x74, 0x14, 0xF0, 0x90, 0x8B, 0x16, 0x74, 0x05, 0xF0, 0x22,
++0x12, 0x29, 0xD9, 0x30, 0xE0, 0x19, 0xC3, 0x13, 0x54, 0x7F, 0x90, 0x8B, 0x15, 0xF0, 0x90, 0x00,
++0x01, 0x12, 0x42, 0x20, 0xFF, 0x90, 0x8B, 0x13, 0xE4, 0xF0, 0xA3, 0xEF, 0xF0, 0x80, 0x0F, 0x90,
++0x8B, 0x15, 0x74, 0x05, 0xF0, 0x90, 0x8B, 0x13, 0xE4, 0xF0, 0xA3, 0x74, 0x03, 0xF0, 0x90, 0x8B,
++0x13, 0xE0, 0xA3, 0xE0, 0x90, 0x05, 0x58, 0xF0, 0x22, 0x12, 0x29, 0xD9, 0x90, 0x8B, 0x12, 0xF0,
++0x60, 0x07, 0xE4, 0xFD, 0x7F, 0x04, 0x12, 0x45, 0xA2, 0x90, 0x8B, 0x12, 0xE0, 0x90, 0x01, 0xE7,
++0xF0, 0x22, 0x90, 0x02, 0x09, 0xE0, 0xFD, 0x12, 0x29, 0xD9, 0xFE, 0xAF, 0x05, 0xED, 0x2E, 0x90,
++0x8A, 0xF7, 0xF0, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0xFF, 0xED, 0x2F, 0x90, 0x8A, 0xF8, 0xF0,
++0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFF, 0xED, 0x2F, 0x90, 0x8A, 0xF9, 0xF0, 0x90, 0x00, 0x03,
++0x12, 0x42, 0x20, 0xFF, 0xED, 0x2F, 0x90, 0x8A, 0xFA, 0xF0, 0x90, 0x00, 0x04, 0x12, 0x42, 0x20,
++0xFF, 0xAE, 0x05, 0xED, 0x2F, 0x90, 0x8A, 0xFB, 0xF0, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0,
++0xD0, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x8B, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0x12, 0x29, 0xD9, 0xC3,
++0x13, 0x20, 0xE0, 0x02, 0xC1, 0xED, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x12, 0x29, 0xD9, 0xFF,
++0x54, 0x02, 0xFE, 0x90, 0x8B, 0x32, 0xE0, 0x54, 0xFD, 0x4E, 0xFE, 0xF0, 0xEF, 0x54, 0x01, 0xFF,
++0xEE, 0x54, 0xFE, 0x4F, 0xFF, 0xF0, 0x12, 0x29, 0xD9, 0xFE, 0x54, 0x08, 0xFD, 0xEF, 0x54, 0xF7,
++0x4D, 0xFF, 0x90, 0x8B, 0x32, 0xF0, 0xEE, 0x54, 0x10, 0xFE, 0xEF, 0x54, 0xEF, 0x4E, 0xFF, 0xF0,
++0x12, 0x29, 0xD9, 0xFE, 0x54, 0x20, 0xFD, 0xEF, 0x54, 0xDF, 0x4D, 0xFF, 0x90, 0x8B, 0x32, 0xF0,
++0xEE, 0x54, 0x40, 0xFE, 0xEF, 0x54, 0xBF, 0x4E, 0xF0, 0x20, 0xE0, 0x02, 0xC1, 0xD9, 0x90, 0x8A,
++0xDD, 0x74, 0x21, 0xF0, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x12, 0x29, 0xD9, 0xFF, 0x13, 0x13,
++0x54, 0x01, 0xFE, 0x90, 0x8B, 0x32, 0xE0, 0xFD, 0x13, 0x13, 0x54, 0x01, 0x6E, 0x60, 0x2A, 0xEF,
++0x54, 0x04, 0xFF, 0xED, 0x54, 0xFB, 0x4F, 0xF0, 0xE0, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x0E,
++0x90, 0x01, 0x34, 0x74, 0x40, 0xF0, 0xFD, 0xE4, 0xFF, 0x12, 0x36, 0xE6, 0x80, 0x0B, 0xE4, 0x90,
++0x8B, 0x34, 0xF0, 0x7D, 0x40, 0xFF, 0x12, 0x36, 0x75, 0x90, 0x8B, 0x32, 0xE0, 0xFD, 0x13, 0x13,
++0x13, 0x54, 0x1F, 0x30, 0xE0, 0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x44, 0x12, 0xF0, 0xED, 0xC4, 0x54,
++0x0F, 0x30, 0xE0, 0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x44, 0x14, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0xC4,
++0x13, 0x54, 0x07, 0x30, 0xE0, 0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x44, 0x80, 0xF0, 0x90, 0x8B, 0x32,
++0xE0, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x20, 0xE0, 0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x44, 0x40, 0xF0,
++0x90, 0x8A, 0xDD, 0xE0, 0x90, 0x05, 0x27, 0xF0, 0x90, 0x8B, 0x33, 0xE0, 0x70, 0x05, 0x7F, 0x01,
++0x12, 0x4E, 0x89, 0x90, 0x8B, 0x32, 0xE0, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x30, 0xE0, 0x04, 0x7F,
++0x03, 0x80, 0x0E, 0x7F, 0x01, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F,
++0x02, 0x12, 0x4E, 0x89, 0x7F, 0x02, 0x02, 0x78, 0x2E, 0x90, 0x8A, 0xDD, 0x74, 0x01, 0xF0, 0x90,
++0x05, 0x27, 0xF0, 0xE4, 0xFF, 0x12, 0x4E, 0x89, 0x7F, 0x03, 0x02, 0x78, 0x2E, 0x90, 0x8A, 0xDA,
++0x12, 0x43, 0x6B, 0x12, 0x29, 0xD9, 0xFF, 0x54, 0x02, 0xFE, 0x90, 0x8B, 0x2C, 0xE0, 0x54, 0xFD,
++0x4E, 0xFE, 0xF0, 0xEF, 0x54, 0x01, 0xFF, 0xEE, 0x54, 0xFE, 0x4F, 0xFF, 0xF0, 0x12, 0x29, 0xD9,
++0xFE, 0x54, 0x08, 0xFD, 0xEF, 0x54, 0xF7, 0x4D, 0xFF, 0x90, 0x8B, 0x2C, 0xF0, 0xEE, 0x54, 0x10,
++0xFE, 0xEF, 0x54, 0xEF, 0x4E, 0xFF, 0xF0, 0x12, 0x29, 0xD9, 0xFE, 0x54, 0x40, 0xFD, 0xEF, 0x54,
++0xBF, 0x4D, 0xFF, 0x90, 0x8B, 0x2C, 0xF0, 0xEE, 0x54, 0x04, 0xFE, 0xEF, 0x54, 0xFB, 0x4E, 0xF0,
++0x20, 0xE0, 0x02, 0xE1, 0xE2, 0x90, 0x8A, 0xDD, 0x74, 0x31, 0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0x13,
++0x13, 0x54, 0x3F, 0x20, 0xE0, 0x0B, 0xE4, 0x90, 0x8B, 0x2E, 0xF0, 0x7D, 0x40, 0xFF, 0x12, 0x36,
++0x75, 0x90, 0x8B, 0x2C, 0xE0, 0xFD, 0x13, 0x13, 0x13, 0x54, 0x1F, 0x30, 0xE0, 0x07, 0x90, 0x8A,
++0xDD, 0xE0, 0x44, 0x02, 0xF0, 0xED, 0xC4, 0x54, 0x0F, 0x30, 0xE0, 0x07, 0x90, 0x8A, 0xDD, 0xE0,
++0x44, 0x04, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0x54, 0x06, 0x60, 0x0C, 0x90, 0x01, 0x3E, 0x74, 0x03,
++0xF0, 0xFD, 0x7F, 0x02, 0x12, 0x37, 0x00, 0x90, 0x8A, 0xDD, 0xE0, 0x90, 0x05, 0x27, 0xF0, 0x90,
++0x8B, 0x2C, 0xE0, 0xFF, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x30, 0xE0, 0x0D, 0xA3, 0xE0, 0x64, 0x06,
++0x60, 0x2C, 0x7F, 0x06, 0x12, 0x65, 0x82, 0x80, 0x25, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x06, 0x1B,
++0x7F, 0x01, 0x12, 0x65, 0x82, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x09, 0x7D, 0x01, 0xAF,
++0x23, 0x12, 0x45, 0xA2, 0x80, 0x05, 0x12, 0x4E, 0x56, 0x80, 0x03, 0x12, 0x7D, 0xC1, 0x7F, 0x01,
++0x80, 0x4C, 0x90, 0x8A, 0xDD, 0x74, 0x01, 0xF0, 0x90, 0x05, 0x27, 0xF0, 0x7D, 0x03, 0x7F, 0x02,
++0x12, 0x36, 0x92, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x06, 0x02, 0x80, 0x1B, 0x90, 0x8B, 0x2D, 0xE0,
++0xB4, 0x04, 0x02, 0x80, 0x07, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x04, 0xE4, 0xFF, 0x80, 0x14,
++0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x03, 0x04, 0x7F, 0x01, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4,
++0x02, 0x05, 0x7F, 0x01, 0x12, 0x65, 0x82, 0x11, 0x35, 0x12, 0x4A, 0xFC, 0x7F, 0x03, 0x11, 0x42,
++0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, 0x8B, 0x31, 0xE0, 0xB4, 0x01, 0x05, 0xE4, 0xF0, 0x12, 0x48,
++0xFE, 0x22, 0xAD, 0x07, 0xEF, 0x64, 0x01, 0x60, 0x04, 0xEF, 0xB4, 0x03, 0x15, 0x90, 0x8B, 0x32,
++0xE0, 0x54, 0xFE, 0xF0, 0x54, 0xFB, 0xF0, 0xE4, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0,
++0xA3, 0xF0, 0xED, 0x64, 0x02, 0x60, 0x04, 0xED, 0xB4, 0x03, 0x15, 0x90, 0x8B, 0x2C, 0xE0, 0x54,
++0xFE, 0xF0, 0x54, 0xFB, 0xF0, 0xE4, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0,
++0x22, 0x12, 0x29, 0xD9, 0x90, 0x8B, 0x38, 0xF0, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0,
++0x90, 0x8A, 0xFD, 0xE0, 0x90, 0x8A, 0xE8, 0xF0, 0x90, 0x8A, 0xFE, 0xE0, 0xFF, 0xA3, 0xE0, 0x90,
++0x8A, 0xE9, 0xCF, 0xF0, 0xA3, 0xEF, 0xF0, 0xE4, 0x90, 0x8A, 0xE4, 0xF0, 0x90, 0x8A, 0xE4, 0xE0,
++0xFF, 0x24, 0x00, 0xF5, 0x82, 0xE4, 0x34, 0x8B, 0xF5, 0x83, 0xE0, 0xFE, 0x74, 0xEB, 0x2F, 0xF5,
++0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEE, 0xF0, 0x90, 0x8A, 0xE4, 0xE0, 0x04, 0xF0, 0xE0, 0xB4,
++0x04, 0xDA, 0x90, 0x8A, 0xE8, 0xE0, 0x12, 0x43, 0x94, 0x78, 0xF8, 0x00, 0x7A, 0x6B, 0x01, 0x79,
++0x01, 0x02, 0x79, 0x01, 0x03, 0x79, 0x01, 0x04, 0x7A, 0x6B, 0x05, 0x7A, 0x35, 0x80, 0x7A, 0x4E,
++0x81, 0x7A, 0x6B, 0x82, 0x00, 0x00, 0x7A, 0x67, 0x90, 0x8A, 0xEE, 0xE0, 0xFF, 0x51, 0x72, 0x41,
++0x6B, 0x90, 0x8A, 0xE8, 0xE0, 0xFF, 0xB4, 0x02, 0x08, 0x90, 0x8A, 0xE5, 0x74, 0x01, 0xF0, 0x80,
++0x0F, 0xEF, 0x90, 0x8A, 0xE5, 0xB4, 0x03, 0x05, 0x74, 0x02, 0xF0, 0x80, 0x03, 0x74, 0x04, 0xF0,
++0xC3, 0x90, 0x8A, 0xE9, 0xE0, 0x94, 0x08, 0x50, 0x78, 0xE4, 0x90, 0x8A, 0xE4, 0xF0, 0x90, 0x8A,
++0xE5, 0xE0, 0xFF, 0x90, 0x8A, 0xE4, 0xE0, 0xC3, 0x9F, 0x40, 0x02, 0x41, 0x6B, 0x90, 0x8A, 0xE9,
++0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0xC3, 0xEE, 0x94, 0x01, 0x90, 0x8A, 0xE4, 0xE0, 0x50, 0x1F, 0xFE,
++0x2F, 0xFF, 0xEE, 0xFD, 0xC3, 0x74, 0x03, 0x9D, 0xFD, 0xE4, 0x94, 0x00, 0xFC, 0x74, 0xEB, 0x2D,
++0xF5, 0x82, 0x74, 0x8A, 0x3C, 0xF5, 0x83, 0xE0, 0xFD, 0x12, 0x51, 0x88, 0x80, 0x2B, 0xFF, 0xFD,
++0xC3, 0x74, 0x03, 0x9D, 0xFD, 0xE4, 0x94, 0x00, 0xFC, 0x74, 0xEB, 0x2D, 0xF5, 0x82, 0x74, 0x8A,
++0x3C, 0xF5, 0x83, 0xE0, 0xFE, 0xEF, 0xFD, 0x90, 0x8A, 0xEA, 0xE0, 0x2D, 0xFD, 0x90, 0x8A, 0xE9,
++0xE0, 0x34, 0x00, 0x8D, 0x82, 0xF5, 0x83, 0xEE, 0xF0, 0x90, 0x8A, 0xE4, 0xE0, 0x04, 0xF0, 0x80,
++0x8D, 0xC3, 0x90, 0x8A, 0xE9, 0xE0, 0x94, 0x10, 0x40, 0x02, 0x41, 0x6B, 0x90, 0x8A, 0xE8, 0xE0,
++0x64, 0x04, 0x60, 0x02, 0x41, 0x6B, 0x90, 0x8A, 0xEC, 0xE0, 0xFF, 0xE4, 0xFC, 0xFD, 0xFE, 0x78,
++0x10, 0x12, 0x2A, 0x6C, 0xC0, 0x04, 0xC0, 0x05, 0xC0, 0x06, 0xC0, 0x07, 0x90, 0x8A, 0xEB, 0xE0,
++0xFF, 0xE4, 0xFC, 0xFD, 0xFE, 0x78, 0x18, 0x12, 0x2A, 0x6C, 0xD0, 0x03, 0xD0, 0x02, 0xD0, 0x01,
++0xD0, 0x00, 0x12, 0x43, 0x46, 0xC0, 0x04, 0xC0, 0x05, 0xC0, 0x06, 0xC0, 0x07, 0x90, 0x8A, 0xED,
++0xE0, 0xFF, 0xE4, 0xFC, 0xFD, 0xFE, 0x78, 0x08, 0x12, 0x2A, 0x6C, 0xD0, 0x03, 0xD0, 0x02, 0xD0,
++0x01, 0xD0, 0x00, 0x12, 0x43, 0x46, 0xA8, 0x04, 0xA9, 0x05, 0xAA, 0x06, 0xAB, 0x07, 0xA3, 0xE0,
++0xFF, 0xE4, 0xFC, 0xFD, 0xFE, 0x12, 0x43, 0x46, 0xA3, 0x12, 0x2A, 0x7F, 0x90, 0x8A, 0xEF, 0x12,
++0x43, 0x53, 0x90, 0x80, 0x85, 0x12, 0x2A, 0x7F, 0x90, 0x8A, 0xE9, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF,
++0x12, 0x2F, 0xD9, 0x80, 0x36, 0x90, 0x8A, 0xED, 0xE0, 0xFE, 0xA3, 0xE0, 0x24, 0x00, 0xFF, 0xE4,
++0x3E, 0xFE, 0x90, 0x8A, 0xE6, 0xF0, 0xA3, 0xEF, 0xF0, 0x12, 0x37, 0x54, 0x80, 0x1D, 0x90, 0x8A,
++0xED, 0xE0, 0xFE, 0xA3, 0xE0, 0x24, 0x00, 0xFF, 0xE4, 0x3E, 0xFE, 0x90, 0x8A, 0xE6, 0xF0, 0xA3,
++0xEF, 0xF0, 0x12, 0x36, 0xCB, 0x80, 0x04, 0x7F, 0x00, 0x80, 0x02, 0x7F, 0x01, 0xD0, 0xD0, 0x92,
++0xAF, 0x22, 0x8F, 0x0F, 0xE4, 0x90, 0x8A, 0xF3, 0xF0, 0xE5, 0x0F, 0x14, 0xFE, 0x90, 0x8A, 0xF3,
++0xE0, 0xFF, 0xC3, 0x9E, 0x50, 0x0E, 0xEF, 0x04, 0xFD, 0x12, 0x34, 0xB7, 0x90, 0x8A, 0xF3, 0xE0,
++0x04, 0xF0, 0x80, 0xE5, 0xE5, 0x0F, 0x14, 0xFF, 0x7D, 0xFF, 0x12, 0x34, 0xB7, 0x90, 0x8A, 0xF3,
++0xE5, 0x0F, 0xF0, 0x90, 0x8A, 0xF3, 0xE0, 0xC3, 0x94, 0xFF, 0x50, 0x0F, 0xE0, 0xFF, 0x04, 0xFD,
++0x12, 0x34, 0xB7, 0x90, 0x8A, 0xF3, 0xE0, 0x04, 0xF0, 0x80, 0xE8, 0xAD, 0x0F, 0x7F, 0xFF, 0x02,
++0x34, 0xB7, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0xA3, 0x74,
++0x04, 0xF0, 0xA3, 0xE4, 0xF0, 0x90, 0x8A, 0xE2, 0xF0, 0xA3, 0xF0, 0x90, 0x02, 0x09, 0xE0, 0x90,
++0x8A, 0xE1, 0xF0, 0x12, 0x29, 0xD9, 0xFF, 0x90, 0x8A, 0xE1, 0xE0, 0x2F, 0x90, 0x8A, 0xE0, 0xF0,
++0x30, 0xE0, 0x0B, 0x90, 0x8A, 0xDB, 0xE4, 0xF0, 0xA3, 0x74, 0x80, 0xF0, 0x80, 0x07, 0xE4, 0x90,
++0x8A, 0xDB, 0xF0, 0xA3, 0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0xC3, 0x13, 0x90, 0xFD, 0x10, 0xF0, 0x90,
++0x8A, 0xDD, 0xE0, 0x24, 0x20, 0xF0, 0x90, 0x8A, 0xDB, 0xA3, 0xE0, 0xFD, 0xA3, 0xE0, 0xFC, 0x2D,
++0xFF, 0x24, 0x01, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x90, 0x8A, 0xFD, 0xF0, 0x74,
++0x02, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0xFE, 0xEC, 0x2D, 0x24, 0x03, 0xF5,
++0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x24, 0x00, 0xFF, 0xE4, 0x3E, 0x90, 0x8A, 0xFE, 0xF0,
++0xA3, 0xEF, 0xF0, 0x90, 0x8A, 0xDA, 0x74, 0x04, 0xF0, 0x90, 0x8A, 0xDB, 0xA3, 0xE0, 0xFF, 0xA3,
++0xE0, 0x2F, 0xFF, 0x90, 0x8A, 0xDA, 0xE0, 0xFE, 0x2F, 0x24, 0x00, 0xF5, 0x82, 0xE4, 0x34, 0xFC,
++0xF5, 0x83, 0xE0, 0xFF, 0x74, 0xFC, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEF, 0xF0,
++0x90, 0x8A, 0xDA, 0xE0, 0x04, 0xF0, 0xE0, 0xB4, 0x08, 0xCF, 0x11, 0x89, 0xEF, 0x70, 0x45, 0x90,
++0x01, 0xC3, 0xE0, 0x60, 0x2B, 0xC3, 0x90, 0x8A, 0xE3, 0xE0, 0x94, 0xE8, 0x90, 0x8A, 0xE2, 0xE0,
++0x94, 0x03, 0x40, 0x09, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x10, 0xF0, 0x80, 0x79, 0x90, 0x8A, 0xE2,
++0xE4, 0x75, 0xF0, 0x01, 0x12, 0x42, 0x81, 0x7F, 0x0A, 0x7E, 0x00, 0x12, 0x37, 0x54, 0x80, 0xCF,
++0x90, 0x01, 0xC6, 0xE0, 0x90, 0x01, 0xC3, 0x30, 0xE2, 0x05, 0x74, 0xFE, 0xF0, 0x80, 0x57, 0x74,
++0xFF, 0xF0, 0x80, 0x52, 0x90, 0x8A, 0xDD, 0xE0, 0xB4, 0x78, 0x2E, 0xE4, 0xF0, 0x90, 0x8A, 0xE0,
++0xE0, 0x04, 0xF0, 0x90, 0x8A, 0xDB, 0xE0, 0x70, 0x04, 0xA3, 0xE0, 0x64, 0x80, 0x90, 0x8A, 0xDB,
++0x70, 0x05, 0xF0, 0xA3, 0xF0, 0x80, 0x06, 0xE4, 0xF0, 0xA3, 0x74, 0x80, 0xF0, 0x90, 0x8A, 0xE0,
++0xE0, 0xC3, 0x13, 0x90, 0xFD, 0x10, 0xF0, 0x80, 0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x24, 0x08, 0xF0,
++0x90, 0x8A, 0xDE, 0x74, 0xFF, 0xF5, 0xF0, 0x12, 0x42, 0x81, 0x90, 0x8A, 0xDE, 0xE0, 0x70, 0x02,
++0xA3, 0xE0, 0x60, 0x02, 0x61, 0x16, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x12, 0x29, 0xD9, 0x90, 0x8B,
++0x05, 0xF0, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0x90, 0x8B, 0x06, 0xF0, 0x22, 0xE4, 0xF5, 0x61,
++0x22, 0x91, 0x4A, 0x90, 0x8B, 0x33, 0x74, 0x02, 0xF0, 0x22, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0,
++0x7F, 0x78, 0x7E, 0x08, 0x12, 0x27, 0xDE, 0x90, 0x8B, 0x1C, 0x12, 0x2A, 0x7F, 0x7F, 0x04, 0x7E,
++0x0C, 0x12, 0x27, 0xDE, 0x90, 0x8B, 0x20, 0x12, 0x2A, 0x7F, 0x7F, 0x00, 0x7E, 0x08, 0x12, 0x27,
++0xDE, 0x90, 0x8B, 0x24, 0x12, 0x2A, 0x7F, 0x90, 0x8B, 0x09, 0xE0, 0x90, 0x8B, 0x1C, 0xB4, 0x01,
++0x0D, 0x12, 0x43, 0x53, 0xEF, 0x54, 0xC7, 0xFF, 0xED, 0x54, 0xC7, 0xFD, 0x80, 0x07, 0x12, 0x43,
++0x53, 0xEF, 0x54, 0xC7, 0xFF, 0xEC, 0x90, 0x80, 0x85, 0x12, 0x2A, 0x7F, 0x7F, 0x78, 0x7E, 0x08,
++0x12, 0x2F, 0xD9, 0x90, 0x8B, 0x20, 0x12, 0x43, 0x53, 0xEF, 0x54, 0x0F, 0xFF, 0xEC, 0x90, 0x80,
++0x85, 0x12, 0x2A, 0x7F, 0x7F, 0x04, 0x7E, 0x0C, 0x12, 0x2F, 0xD9, 0x90, 0x8B, 0x24, 0x12, 0x43,
++0x53, 0xEF, 0x44, 0x02, 0xFF, 0xEC, 0x90, 0x80, 0x85, 0x12, 0x2A, 0x7F, 0x7F, 0x00, 0x7E, 0x08,
++0x12, 0x2F, 0xD9, 0x7F, 0x70, 0x7E, 0x0E, 0x12, 0x27, 0xDE, 0x90, 0x8B, 0x28, 0x12, 0x2A, 0x7F,
++0x90, 0x80, 0x85, 0x12, 0x2A, 0x8B, 0x00, 0x1B, 0x25, 0xA0, 0x7F, 0x70, 0x7E, 0x0E, 0x12, 0x2F,
++0xD9, 0x90, 0x80, 0x59, 0x12, 0x2A, 0x8B, 0x00, 0x00, 0x00, 0x00, 0xE4, 0xFD, 0xFF, 0x12, 0x34,
++0x81, 0x90, 0x8B, 0x09, 0xE0, 0xB4, 0x01, 0x11, 0x90, 0x80, 0x59, 0x12, 0x2A, 0x8B, 0x00, 0x00,
++0x00, 0x00, 0xE4, 0xFD, 0x7F, 0x01, 0x12, 0x34, 0x81, 0x90, 0x00, 0x11, 0xE0, 0x54, 0xF6, 0xF0,
++0x02, 0x52, 0x0E, 0x91, 0x50, 0x90, 0x8B, 0x33, 0x74, 0x02, 0xF0, 0x22, 0x90, 0x05, 0x22, 0x74,
++0xFF, 0xF0, 0x90, 0x8B, 0x33, 0x74, 0x04, 0xF0, 0x22, 0xB1, 0x42, 0x90, 0x8B, 0x33, 0x74, 0x04,
++0xF0, 0x22, 0x90, 0x00, 0x11, 0xE0, 0x44, 0x09, 0xF0, 0x12, 0x52, 0x0E, 0x90, 0x8B, 0x1C, 0x12,
++0x43, 0x53, 0x90, 0x80, 0x85, 0x12, 0x2A, 0x7F, 0x7F, 0x78, 0x7E, 0x08, 0x12, 0x2F, 0xD9, 0x90,
++0x8B, 0x20, 0x12, 0x43, 0x53, 0x90, 0x80, 0x85, 0x12, 0x2A, 0x7F, 0x7F, 0x04, 0x7E, 0x0C, 0x12,
++0x2F, 0xD9, 0x90, 0x8B, 0x24, 0x12, 0x43, 0x53, 0x90, 0x80, 0x85, 0x12, 0x2A, 0x7F, 0x7F, 0x00,
++0x7E, 0x08, 0x12, 0x2F, 0xD9, 0x90, 0x8B, 0x28, 0x12, 0x43, 0x53, 0x90, 0x80, 0x85, 0x12, 0x2A,
++0x7F, 0x7F, 0x70, 0x7E, 0x0E, 0x12, 0x2F, 0xD9, 0x90, 0x80, 0x59, 0x12, 0x2A, 0x8B, 0x00, 0x03,
++0x2D, 0x95, 0xE4, 0xFD, 0xFF, 0x12, 0x34, 0x81, 0x90, 0x8B, 0x09, 0xE0, 0xB4, 0x01, 0x11, 0x90,
++0x80, 0x59, 0x12, 0x2A, 0x8B, 0x00, 0x03, 0x2D, 0x95, 0xE4, 0xFD, 0x7F, 0x01, 0x12, 0x34, 0x81,
++0x22, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x06, 0x60, 0x3C, 0xE5, 0x22, 0x54, 0x0F, 0x14, 0x60, 0x2E,
++0x14, 0x60, 0x1E, 0x24, 0xFE, 0x60, 0x0E, 0x24, 0xF8, 0x70, 0x2A, 0xE4, 0x90, 0x8B, 0x2D, 0xF0,
++0x90, 0x05, 0x22, 0xF0, 0x22, 0x90, 0x8B, 0x2D, 0x74, 0x01, 0xF0, 0x90, 0x05, 0x22, 0xE4, 0xF0,
++0x22, 0x90, 0x8B, 0x2D, 0x74, 0x03, 0xF0, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x22, 0x90, 0x01,
++0xC6, 0xE0, 0x44, 0x08, 0xF0, 0x22, 0xAE, 0x07, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x18,
++0x90, 0x8B, 0x2C, 0xE0, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x20, 0xE0, 0x0C, 0xAF, 0x06, 0x7D, 0x01,
++0x12, 0x45, 0xA2, 0xB1, 0xC1, 0x7F, 0x01, 0x22, 0x7F, 0x00, 0x22, 0x90, 0x01, 0x57, 0xE0, 0x60,
++0x3C, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x02, 0xF0, 0x90, 0x8B, 0x1B, 0xE0,
++0x60, 0x07, 0xE4, 0xF0, 0x53, 0x25, 0xFD, 0x80, 0x24, 0x90, 0x8B, 0x0C, 0xE0, 0x04, 0xF0, 0x53,
++0x25, 0xEF, 0x90, 0x8B, 0x10, 0xE0, 0xFF, 0x90, 0x8B, 0x0C, 0xE0, 0xD3, 0x9F, 0x40, 0x0E, 0xE5,
++0x21, 0xB4, 0x01, 0x09, 0x90, 0x8B, 0x0D, 0xE0, 0x70, 0x03, 0xE0, 0x04, 0xF0, 0x90, 0x01, 0x5B,
++0xE0, 0x60, 0x10, 0x90, 0x01, 0x5B, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x04, 0xF0, 0xE4, 0x90,
++0x8B, 0x18, 0xF0, 0x90, 0x01, 0x5F, 0xE0, 0x60, 0x10, 0x90, 0x01, 0x5F, 0xE4, 0xF0, 0x90, 0x01,
++0x3C, 0x74, 0x08, 0xF0, 0xE4, 0x90, 0x8B, 0x17, 0xF0, 0x22, 0xE4, 0x90, 0x8B, 0x4F, 0xF0, 0xA3,
++0xF0, 0x90, 0x05, 0xF8, 0xE0, 0x70, 0x0F, 0xA3, 0xE0, 0x70, 0x0B, 0xA3, 0xE0, 0x70, 0x07, 0xA3,
++0xE0, 0x70, 0x03, 0x7F, 0x01, 0x22, 0xD3, 0x90, 0x8B, 0x50, 0xE0, 0x94, 0xE8, 0x90, 0x8B, 0x4F,
++0xE0, 0x94, 0x03, 0x40, 0x03, 0x7F, 0x00, 0x22, 0x7F, 0x32, 0x7E, 0x00, 0x12, 0x37, 0x54, 0x90,
++0x8B, 0x4F, 0xE4, 0x75, 0xF0, 0x01, 0x12, 0x42, 0x81, 0x80, 0xC6, 0x00, 0x92, 0x00};
++
++// =================== v88 UMC A Cut P2PPS with CCX report C2H 2012-12-05 =====================
++u8 Rtl8192CUFwUMCACutImgArray[UMCACutImgArrayLength] = {
++0xC1, 0x88, 0x02, 0x05, 0x58, 0x00, 0x02, 0x00, 0x12, 0x05, 0x17, 0x11, 0xDE, 0x3E, 0x01, 0x00,
++0x94, 0x18, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0x02, 0x46, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0x00, 0x00, 0x00, 0x02, 0x60, 0xF2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0x00, 0x00, 0x00, 0x02, 0x68, 0x91, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x4B, 0x87, 0x00, 0x00,
++0x05, 0x04, 0x03, 0x02, 0x00, 0x03, 0x06, 0x05, 0x04, 0x03, 0x00, 0x04, 0x06, 0x05, 0x04, 0x02,
++0x00, 0x04, 0x08, 0x07, 0x06, 0x04, 0x00, 0x06, 0x0A, 0x09, 0x08, 0x06, 0x00, 0x08, 0x0A, 0x09,
++0x08, 0x04, 0x00, 0x08, 0x0A, 0x09, 0x08, 0x02, 0x00, 0x08, 0x0A, 0x09, 0x08, 0x00, 0x00, 0x08,
++0x12, 0x11, 0x10, 0x08, 0x00, 0x10, 0x1A, 0x19, 0x18, 0x10, 0x00, 0x18, 0x22, 0x21, 0x20, 0x18,
++0x00, 0x20, 0x22, 0x21, 0x20, 0x10, 0x00, 0x20, 0x22, 0x21, 0x20, 0x08, 0x00, 0x20, 0x22, 0x21,
++0x1C, 0x08, 0x00, 0x20, 0x22, 0x21, 0x14, 0x08, 0x00, 0x20, 0x22, 0x20, 0x18, 0x08, 0x00, 0x20,
++0x31, 0x30, 0x20, 0x10, 0x00, 0x30, 0x31, 0x30, 0x18, 0x00, 0x00, 0x30, 0x31, 0x2F, 0x10, 0x10,
++0x00, 0x30, 0x31, 0x2C, 0x10, 0x10, 0x00, 0x30, 0x31, 0x28, 0x10, 0x00, 0x00, 0x30, 0x31, 0x20,
++0x10, 0x00, 0x00, 0x30, 0x31, 0x10, 0x10, 0x00, 0x00, 0x30, 0x04, 0x04, 0x04, 0x05, 0x04, 0x04,
++0x05, 0x07, 0x07, 0x07, 0x08, 0x0A, 0x04, 0x04, 0x04, 0x04, 0x06, 0x0A, 0x0B, 0x0D, 0x05, 0x05,
++0x07, 0x07, 0x08, 0x0B, 0x0D, 0x0F, 0x04, 0x04, 0x04, 0x05, 0x07, 0x07, 0x09, 0x09, 0x0C, 0x0E,
++0x10, 0x12, 0x06, 0x07, 0x09, 0x0A, 0x0C, 0x0E, 0x11, 0x13, 0x09, 0x09, 0x09, 0x09, 0x0C, 0x0E,
++0x11, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x24, 0x26, 0x2A, 0x18, 0x1A,
++0x1D, 0x1F, 0x21, 0x27, 0x29, 0x2A, 0x00, 0x00, 0x00, 0x1F, 0x23, 0x28, 0x2A, 0x2C, 0x00, 0x04,
++0x00, 0x04, 0x00, 0x08, 0x00, 0x10, 0x00, 0x18, 0x00, 0x24, 0x00, 0x30, 0x00, 0x48, 0x00, 0x60,
++0x00, 0x90, 0x00, 0xC0, 0x00, 0xD8, 0x00, 0x50, 0x00, 0x78, 0x00, 0xA0, 0x00, 0xC8, 0x01, 0x40,
++0x01, 0x90, 0x01, 0xE0, 0x02, 0x30, 0x01, 0x2C, 0x01, 0x40, 0x01, 0xE0, 0x02, 0xD0, 0x03, 0xE8,
++0x04, 0xB0, 0x06, 0x40, 0x07, 0xD0, 0x00, 0x02, 0x00, 0x02, 0x00, 0x04, 0x00, 0x08, 0x00, 0x0C,
++0x00, 0x12, 0x00, 0x18, 0x00, 0x24, 0x00, 0x30, 0x00, 0x48, 0x00, 0x60, 0x00, 0x6C, 0x00, 0x28,
++0x00, 0x3C, 0x00, 0x50, 0x00, 0x64, 0x00, 0xA0, 0x00, 0xC8, 0x00, 0xF0, 0x01, 0x18, 0x00, 0x64,
++0x00, 0xA0, 0x00, 0xF0, 0x01, 0x68, 0x01, 0xF4, 0x02, 0x58, 0x03, 0x20, 0x03, 0xE8, 0x02, 0x02,
++0x02, 0x02, 0x02, 0x02, 0x03, 0x03, 0x04, 0x04, 0x05, 0x07, 0x02, 0x03, 0x04, 0x0A, 0x0C, 0x0E,
++0x10, 0x12, 0x05, 0x07, 0x07, 0x08, 0x0B, 0x12, 0x24, 0x3C, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02,
++0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x05, 0x06,
++0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x20, 0x1E, 0x1C, 0x18, 0x10, 0x18, 0x00, 0x00, 0x00, 0x00,
++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0xBB, 0x01, 0x0C, 0xE5, 0x82, 0x29, 0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE0, 0x22, 0x50,
++0x06, 0xE9, 0x25, 0x82, 0xF8, 0xE6, 0x22, 0xBB, 0xFE, 0x06, 0xE9, 0x25, 0x82, 0xF8, 0xE2, 0x22,
++0xE5, 0x82, 0x29, 0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE4, 0x93, 0x22, 0xBB, 0x01, 0x06,
++0x89, 0x82, 0x8A, 0x83, 0xF0, 0x22, 0x50, 0x02, 0xF7, 0x22, 0xBB, 0xFE, 0x01, 0xF3, 0x22, 0xF8,
++0xBB, 0x01, 0x0D, 0xE5, 0x82, 0x29, 0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE8, 0xF0, 0x22,
++0x50, 0x06, 0xE9, 0x25, 0x82, 0xC8, 0xF6, 0x22, 0xBB, 0xFE, 0x05, 0xE9, 0x25, 0x82, 0xC8, 0xF2,
++0x22, 0xC5, 0xF0, 0xF8, 0xA3, 0xE0, 0x28, 0xF0, 0xC5, 0xF0, 0xF8, 0xE5, 0x82, 0x15, 0x82, 0x70,
++0x02, 0x15, 0x83, 0xE0, 0x38, 0xF0, 0x22, 0xBB, 0x01, 0x0A, 0x89, 0x82, 0x8A, 0x83, 0xE0, 0xF5,
++0xF0, 0xA3, 0xE0, 0x22, 0x50, 0x06, 0x87, 0xF0, 0x09, 0xE7, 0x19, 0x22, 0xBB, 0xFE, 0x07, 0xE3,
++0xF5, 0xF0, 0x09, 0xE3, 0x19, 0x22, 0x89, 0x82, 0x8A, 0x83, 0xE4, 0x93, 0xF5, 0xF0, 0x74, 0x01,
++0x93, 0x22, 0xBB, 0x01, 0x10, 0xE5, 0x82, 0x29, 0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE0,
++0xF5, 0xF0, 0xA3, 0xE0, 0x22, 0x50, 0x09, 0xE9, 0x25, 0x82, 0xF8, 0x86, 0xF0, 0x08, 0xE6, 0x22,
++0xBB, 0xFE, 0x0A, 0xE9, 0x25, 0x82, 0xF8, 0xE2, 0xF5, 0xF0, 0x08, 0xE2, 0x22, 0xE5, 0x83, 0x2A,
++0xF5, 0x83, 0xE9, 0x93, 0xF5, 0xF0, 0xA3, 0xE9, 0x93, 0x22, 0xBB, 0x01, 0x0A, 0x89, 0x82, 0x8A,
++0x83, 0xF0, 0xE5, 0xF0, 0xA3, 0xF0, 0x22, 0x50, 0x06, 0xF7, 0x09, 0xA7, 0xF0, 0x19, 0x22, 0xBB,
++0xFE, 0x06, 0xF3, 0xE5, 0xF0, 0x09, 0xF3, 0x19, 0x22, 0xF8, 0xBB, 0x01, 0x11, 0xE5, 0x82, 0x29,
++0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE8, 0xF0, 0xE5, 0xF0, 0xA3, 0xF0, 0x22, 0x50, 0x09,
++0xE9, 0x25, 0x82, 0xC8, 0xF6, 0x08, 0xA6, 0xF0, 0x22, 0xBB, 0xFE, 0x09, 0xE9, 0x25, 0x82, 0xC8,
++0xF2, 0xE5, 0xF0, 0x08, 0xF2, 0x22, 0xEF, 0x4B, 0xFF, 0xEE, 0x4A, 0xFE, 0xED, 0x49, 0xFD, 0xEC,
++0x48, 0xFC, 0x22, 0xE0, 0xFC, 0xA3, 0xE0, 0xFD, 0xA3, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0x22, 0xA4,
++0x25, 0x82, 0xF5, 0x82, 0xE5, 0xF0, 0x35, 0x83, 0xF5, 0x83, 0x22, 0xE0, 0xFB, 0xA3, 0xE0, 0xFA,
++0xA3, 0xE0, 0xF9, 0x22, 0xF8, 0xE0, 0xFB, 0xA3, 0xA3, 0xE0, 0xF9, 0x25, 0xF0, 0xF0, 0xE5, 0x82,
++0x15, 0x82, 0x70, 0x02, 0x15, 0x83, 0xE0, 0xFA, 0x38, 0xF0, 0x22, 0xEB, 0xF0, 0xA3, 0xEA, 0xF0,
++0xA3, 0xE9, 0xF0, 0x22, 0xD0, 0x83, 0xD0, 0x82, 0xF8, 0xE4, 0x93, 0x70, 0x12, 0x74, 0x01, 0x93,
++0x70, 0x0D, 0xA3, 0xA3, 0x93, 0xF8, 0x74, 0x01, 0x93, 0xF5, 0x82, 0x88, 0x83, 0xE4, 0x73, 0x74,
++0x02, 0x93, 0x68, 0x60, 0xEF, 0xA3, 0xA3, 0xA3, 0x80, 0xDF, 0xD0, 0x83, 0xD0, 0x82, 0xF8, 0xE4,
++0x93, 0x70, 0x12, 0x74, 0x01, 0x93, 0x70, 0x0D, 0xA3, 0xA3, 0x93, 0xF8, 0x74, 0x01, 0x93, 0xF5,
++0x82, 0x88, 0x83, 0xE4, 0x73, 0x74, 0x02, 0x93, 0xB5, 0xF0, 0x06, 0x74, 0x03, 0x93, 0x68, 0x60,
++0xE9, 0xA3, 0xA3, 0xA3, 0xA3, 0x80, 0xD8, 0xE4, 0x90, 0x8A, 0xC5, 0xF0, 0xE5, 0x24, 0x70, 0x03,
++0x02, 0x44, 0x9D, 0xE5, 0x21, 0x64, 0x01, 0x60, 0x03, 0x02, 0x44, 0x9D, 0xE5, 0x24, 0x14, 0x60,
++0x29, 0x24, 0xFD, 0x60, 0x25, 0x24, 0x02, 0x24, 0xFB, 0x50, 0x02, 0x80, 0x23, 0x90, 0x8B, 0x0B,
++0xE0, 0x14, 0xF0, 0xE0, 0x60, 0x04, 0xA3, 0xE0, 0x60, 0x16, 0x90, 0x8B, 0x0B, 0xE0, 0x70, 0x0A,
++0x90, 0x8B, 0x19, 0xE0, 0x90, 0x8B, 0x0B, 0xF0, 0x80, 0x00, 0x90, 0x8A, 0xC5, 0x74, 0x01, 0xF0,
++0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x16, 0xA3, 0xE0, 0xB4, 0x06, 0x05, 0xE4, 0x90, 0x8A, 0xC5,
++0xF0, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x70, 0x04, 0x90, 0x8A, 0xC5, 0xF0, 0x90, 0x8A, 0xC5,
++0xE0, 0x60, 0x4A, 0x43, 0x25, 0x10, 0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x8B, 0x0C, 0xE0, 0x75,
++0xF0, 0x03, 0xA4, 0xFF, 0x90, 0x8B, 0x15, 0xE0, 0x2F, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB, 0xFD,
++0x7F, 0x54, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x57, 0x74, 0x05, 0xF0, 0xE5, 0x22, 0x54,
++0x0F, 0xC3, 0x94, 0x04, 0x50, 0x07, 0x7D, 0x01, 0x7F, 0x04, 0x12, 0x45, 0xA2, 0x90, 0x8B, 0x2C,
++0xE0, 0x30, 0xE0, 0x09, 0x12, 0x7D, 0xC1, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x22, 0xE4, 0xF5,
++0x25, 0xF5, 0x24, 0x75, 0x23, 0x0C, 0x75, 0x22, 0x0C, 0x90, 0x8B, 0x1A, 0xF0, 0x90, 0x8B, 0x18,
++0xF0, 0x90, 0x8B, 0x17, 0xF0, 0x90, 0x8B, 0x19, 0x04, 0xF0, 0x90, 0x8B, 0x0B, 0xF0, 0xE4, 0x90,
++0x8B, 0x1B, 0xF0, 0x90, 0x8B, 0x0D, 0xF0, 0x90, 0x8B, 0x15, 0x74, 0x05, 0xF0, 0xE4, 0x90, 0x8B,
++0x0C, 0xF0, 0x90, 0x8B, 0x13, 0xF0, 0xA3, 0x74, 0x03, 0xF0, 0x90, 0x8B, 0x10, 0xF0, 0xA3, 0x74,
++0x05, 0xF0, 0x90, 0x8B, 0x0F, 0x74, 0x14, 0xF0, 0x90, 0x8B, 0x16, 0x74, 0x05, 0xF0, 0xE4, 0x90,
++0x8B, 0x0E, 0xF0, 0x90, 0x8B, 0x0A, 0xF0, 0x90, 0x8B, 0x08, 0xF0, 0x90, 0x8B, 0x12, 0xF0, 0x22,
++0x7F, 0x00, 0x22, 0x02, 0x45, 0x03, 0x02, 0x45, 0x06, 0x8E, 0x64, 0x8F, 0x65, 0xAD, 0x65, 0xAC,
++0x64, 0xAF, 0x63, 0x12, 0x4A, 0x5B, 0xAF, 0x65, 0xAE, 0x64, 0x90, 0x04, 0x80, 0xE0, 0x54, 0x0F,
++0xFD, 0xAC, 0x07, 0x74, 0x11, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x01,
++0xF0, 0x74, 0x11, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x54, 0xFB, 0xF0, 0xAC,
++0x07, 0x74, 0x16, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0xFA, 0xF0, 0x74,
++0x15, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x1F, 0xF0, 0xAC, 0x07, 0x74,
++0x06, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x0F, 0xF0, 0x90, 0x04, 0x53,
++0xE4, 0xF0, 0x90, 0x04, 0x52, 0xF0, 0x90, 0x04, 0x51, 0x74, 0xFF, 0xF0, 0x90, 0x04, 0x50, 0x74,
++0xFD, 0xF0, 0x74, 0x14, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x54, 0xC0, 0x4D,
++0xFD, 0x74, 0x14, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xED, 0xF0, 0x22, 0x7D, 0x01,
++0x7F, 0x0C, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x8F, 0x67, 0x8D, 0x68, 0xE5, 0x67, 0x54,
++0x0F, 0xFF, 0xE5, 0x22, 0x54, 0x0F, 0x6F, 0x60, 0x72, 0xE5, 0x67, 0x30, 0xE2, 0x30, 0xE5, 0x22,
++0x20, 0xE2, 0x05, 0x7F, 0x01, 0x12, 0x4A, 0xB2, 0xE5, 0x22, 0x30, 0xE3, 0x10, 0xE5, 0x67, 0x20,
++0xE3, 0x0B, 0x12, 0x49, 0xD5, 0xEF, 0x60, 0x53, 0x12, 0x4A, 0xCC, 0x80, 0x4E, 0xE5, 0x22, 0x20,
++0xE3, 0x49, 0xE5, 0x67, 0x30, 0xE3, 0x44, 0xAF, 0x68, 0x12, 0x4A, 0x7C, 0x80, 0x3D, 0xE5, 0x22,
++0x54, 0x0F, 0xFF, 0xBF, 0x0C, 0x0E, 0xE5, 0x67, 0x20, 0xE3, 0x09, 0x12, 0x49, 0xD5, 0xEF, 0x60,
++0x2A, 0x12, 0x4A, 0xCC, 0xE5, 0x22, 0x54, 0x0F, 0xFF, 0xBF, 0x04, 0x0E, 0xE5, 0x67, 0x20, 0xE2,
++0x09, 0x12, 0x49, 0x93, 0xEF, 0x60, 0x14, 0x12, 0x4A, 0x32, 0xE5, 0x22, 0x54, 0x0F, 0xFF, 0xBF,
++0x02, 0x09, 0x12, 0x45, 0x00, 0xEF, 0x60, 0x03, 0x12, 0x4B, 0x10, 0xD0, 0xD0, 0x92, 0xAF, 0x22,
++0x02, 0x46, 0x6E, 0x02, 0x50, 0xC6, 0xE4, 0x93, 0xA3, 0xF8, 0xE4, 0x93, 0xA3, 0x40, 0x03, 0xF6,
++0x80, 0x01, 0xF2, 0x08, 0xDF, 0xF4, 0x80, 0x29, 0xE4, 0x93, 0xA3, 0xF8, 0x54, 0x07, 0x24, 0x0C,
++0xC8, 0xC3, 0x33, 0xC4, 0x54, 0x0F, 0x44, 0x20, 0xC8, 0x83, 0x40, 0x04, 0xF4, 0x56, 0x80, 0x01,
++0x46, 0xF6, 0xDF, 0xE4, 0x80, 0x0B, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x90, 0x4B,
++0x23, 0xE4, 0x7E, 0x01, 0x93, 0x60, 0xBC, 0xA3, 0xFF, 0x54, 0x3F, 0x30, 0xE5, 0x09, 0x54, 0x1F,
++0xFE, 0xE4, 0x93, 0xA3, 0x60, 0x01, 0x0E, 0xCF, 0x54, 0xC0, 0x25, 0xE0, 0x60, 0xA8, 0x40, 0xB8,
++0xE4, 0x93, 0xA3, 0xFA, 0xE4, 0x93, 0xA3, 0xF8, 0xE4, 0x93, 0xA3, 0xC8, 0xC5, 0x82, 0xC8, 0xCA,
++0xC5, 0x83, 0xCA, 0xF0, 0xA3, 0xC8, 0xC5, 0x82, 0xC8, 0xCA, 0xC5, 0x83, 0xCA, 0xDF, 0xE9, 0xDE,
++0xE7, 0x80, 0xBE, 0xE5, 0x21, 0x64, 0x01, 0x70, 0x67, 0xE5, 0x24, 0x60, 0x63, 0xE5, 0x24, 0x64,
++0x02, 0x60, 0x06, 0xE5, 0x24, 0x64, 0x05, 0x70, 0x27, 0x90, 0x06, 0xAB, 0xE0, 0x90, 0x8B, 0x0B,
++0xF0, 0x90, 0x06, 0xAA, 0xE0, 0x90, 0x8B, 0x19, 0xF0, 0x90, 0x8B, 0x0B, 0xE0, 0x70, 0x07, 0x90,
++0x8B, 0x19, 0xE0, 0xFF, 0x80, 0x05, 0x90, 0x8B, 0x0B, 0xE0, 0xFF, 0x90, 0x8B, 0x0B, 0xEF, 0xF0,
++0x90, 0x8B, 0x0D, 0xE0, 0x60, 0x02, 0xE4, 0xF0, 0xE4, 0x90, 0x8B, 0x0C, 0xF0, 0x90, 0x05, 0x58,
++0x74, 0x03, 0xF0, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x02, 0xF0, 0x53, 0x25,
++0xFD, 0x53, 0x25, 0xEF, 0xE5, 0x24, 0x14, 0x24, 0xFD, 0x50, 0x02, 0x80, 0x03, 0x12, 0x47, 0x8E,
++0x22, 0xEF, 0x64, 0x01, 0x70, 0x35, 0x7D, 0x78, 0x7F, 0x02, 0x12, 0x31, 0x2C, 0x7D, 0x02, 0x7F,
++0x03, 0x12, 0x31, 0x2C, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x02, 0xF0, 0x12,
++0x45, 0x9E, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x03, 0x12, 0x7D, 0xC1, 0x90, 0x06, 0x04, 0xE0,
++0x54, 0x7F, 0xF0, 0x90, 0x06, 0x0A, 0xE0, 0x54, 0xF8, 0xF0, 0x22, 0x90, 0x01, 0x36, 0x74, 0x7B,
++0xF0, 0xA3, 0x74, 0x02, 0xF0, 0x7D, 0x7B, 0xFF, 0x12, 0x31, 0x9D, 0x7D, 0x02, 0x7F, 0x03, 0x12,
++0x31, 0x9D, 0x90, 0x06, 0x04, 0xE0, 0x44, 0x80, 0xF0, 0x90, 0x06, 0x0A, 0xE0, 0x44, 0x07, 0xF0,
++0x12, 0x4B, 0x4F, 0xE5, 0x21, 0x20, 0xE0, 0x05, 0xE4, 0x90, 0x8B, 0x0D, 0xF0, 0x22, 0xE4, 0x90,
++0x8A, 0xC5, 0xF0, 0x90, 0x06, 0xA9, 0xE0, 0x90, 0x8A, 0xC5, 0xF0, 0xE0, 0x54, 0xC0, 0x70, 0x09,
++0x53, 0x25, 0xFE, 0x53, 0x25, 0xFD, 0x12, 0x4A, 0xFC, 0x90, 0x8A, 0xC5, 0xE0, 0x30, 0xE6, 0x15,
++0x43, 0x25, 0x01, 0x90, 0x8B, 0x1A, 0xE0, 0x64, 0x02, 0x60, 0x05, 0x12, 0x4A, 0x97, 0x80, 0x08,
++0x12, 0x49, 0x49, 0x80, 0x03, 0x53, 0x25, 0xFE, 0x90, 0x8A, 0xC5, 0xE0, 0x30, 0xE7, 0x27, 0x43,
++0x25, 0x02, 0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x8B, 0x11, 0xE0, 0x90, 0x8B, 0x3E, 0xF0, 0xE4,
++0xFB, 0xFD, 0x7F, 0x54, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x57, 0x74, 0x05, 0xF0, 0x90,
++0x8B, 0x1B, 0x74, 0x01, 0xF0, 0x22, 0x53, 0x25, 0xFD, 0x22, 0x90, 0x8A, 0xDE, 0x12, 0x43, 0x8B,
++0x12, 0x4B, 0x43, 0x90, 0x8A, 0xDE, 0x12, 0x43, 0x6B, 0x12, 0x24, 0x62, 0xF5, 0x24, 0x14, 0x60,
++0x0E, 0x14, 0x60, 0x1F, 0x14, 0x60, 0x31, 0x24, 0x03, 0x70, 0x44, 0x7F, 0x01, 0x80, 0x3D, 0x90,
++0x8A, 0xDE, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFD, 0xE4, 0xFF, 0x12, 0x4A,
++0x07, 0x80, 0x29, 0x90, 0x8A, 0xDE, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFD,
++0x7F, 0x01, 0x12, 0x4A, 0x07, 0x1F, 0x80, 0x14, 0x90, 0x8A, 0xDE, 0x12, 0x43, 0x6B, 0x90, 0x00,
++0x02, 0x12, 0x42, 0x20, 0xFD, 0x7F, 0x02, 0x12, 0x4A, 0x07, 0xE4, 0xFF, 0x12, 0x47, 0x21, 0x22,
++0xE4, 0x90, 0x8A, 0xCB, 0xF0, 0xE5, 0x24, 0x60, 0x49, 0x90, 0x8B, 0x1B, 0xE0, 0x60, 0x0D, 0xE4,
++0xF0, 0x53, 0x25, 0xFD, 0xE5, 0x25, 0x54, 0x07, 0x70, 0x38, 0x80, 0x33, 0x90, 0x8B, 0x0C, 0xE0,
++0x04, 0xF0, 0x53, 0x25, 0xEF, 0x90, 0x8A, 0xCB, 0xE0, 0xFF, 0x90, 0x8B, 0x10, 0xE0, 0x2F, 0xFF,
++0xE4, 0x33, 0xFE, 0x90, 0x8B, 0x0C, 0xE0, 0xD3, 0x9F, 0xEE, 0x64, 0x80, 0xF8, 0x74, 0x80, 0x98,
++0x40, 0x0D, 0xE5, 0x21, 0xB4, 0x01, 0x0B, 0xA3, 0xE0, 0x70, 0x07, 0xE0, 0x04, 0xF0, 0x22, 0x12,
++0x4A, 0xFC, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x8F, 0x63, 0x90, 0x04, 0x1D, 0xE0,
++0x60, 0x24, 0x90, 0x05, 0x22, 0xE0, 0xF5, 0x66, 0x74, 0xFF, 0xF0, 0x12, 0x7E, 0x9A, 0xBF, 0x01,
++0x0D, 0x90, 0x8A, 0xF9, 0xE0, 0xFF, 0x7D, 0x01, 0x12, 0x5F, 0xFD, 0x12, 0x45, 0x09, 0x90, 0x05,
++0x22, 0xE5, 0x66, 0xF0, 0x80, 0x0D, 0x90, 0x8A, 0xF9, 0xE0, 0xFF, 0x7D, 0x01, 0x12, 0x5F, 0xFD,
++0x12, 0x45, 0x09, 0x90, 0x04, 0x1F, 0x74, 0x20, 0xF0, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xE5, 0x24,
++0x14, 0x24, 0xFD, 0x50, 0x02, 0x80, 0x41, 0x90, 0x8B, 0x1A, 0xE0, 0x60, 0x2B, 0x12, 0x45, 0x9E,
++0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x8B, 0x0F, 0xE0, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB, 0xFD,
++0x7F, 0x58, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x5B, 0x74, 0x05, 0xF0, 0x90, 0x06, 0x92,
++0x74, 0x01, 0xF0, 0x90, 0x8B, 0x18, 0xF0, 0x22, 0xE5, 0x22, 0x54, 0x0F, 0xC3, 0x94, 0x04, 0x50,
++0x07, 0x7D, 0x01, 0x7F, 0x04, 0x12, 0x45, 0xA2, 0x22, 0x90, 0x01, 0x5F, 0xE4, 0xF0, 0x90, 0x01,
++0x3C, 0x74, 0x08, 0xF0, 0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x8B, 0x0F, 0xE0, 0x90, 0x8B, 0x3E,
++0xF0, 0xE4, 0xFB, 0xFD, 0x7F, 0x5C, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x5F, 0x74, 0x05,
++0xF0, 0x90, 0x06, 0x92, 0x74, 0x02, 0xF0, 0x90, 0x8B, 0x17, 0x14, 0xF0, 0xE5, 0x22, 0x54, 0x0F,
++0xC3, 0x94, 0x0C, 0x50, 0x0D, 0x12, 0x45, 0x9E, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x03, 0x12,
++0x7D, 0xC1, 0x22, 0x12, 0x4B, 0x34, 0xEF, 0x64, 0x01, 0x70, 0x37, 0xE5, 0x25, 0x54, 0x03, 0x70,
++0x31, 0xE5, 0x23, 0x54, 0x0F, 0xD3, 0x94, 0x02, 0x50, 0x28, 0xE5, 0x25, 0x20, 0xE2, 0x23, 0xE5,
++0x25, 0x20, 0xE4, 0x1E, 0x90, 0x8B, 0x0D, 0xE0, 0x70, 0x18, 0x90, 0x8B, 0x12, 0xE0, 0x70, 0x12,
++0xE5, 0x26, 0x70, 0x0E, 0x90, 0x01, 0xB9, 0xE4, 0xF0, 0x90, 0x01, 0xB8, 0x74, 0x04, 0xF0, 0x7F,
++0x01, 0x22, 0x7F, 0x00, 0x22, 0x12, 0x4B, 0x34, 0xEF, 0x64, 0x01, 0x70, 0x27, 0x90, 0x8B, 0x18,
++0xE0, 0x70, 0x21, 0x90, 0x8B, 0x17, 0xE0, 0x70, 0x1B, 0xE5, 0x23, 0x54, 0x0F, 0xD3, 0x94, 0x04,
++0x50, 0x12, 0xE5, 0x26, 0x70, 0x0E, 0x90, 0x01, 0xB9, 0xE4, 0xF0, 0x90, 0x01, 0xB8, 0x74, 0x08,
++0xF0, 0x7F, 0x01, 0x22, 0x7F, 0x00, 0x22, 0xEF, 0x24, 0xFE, 0x60, 0x0B, 0x04, 0x70, 0x22, 0x90,
++0x8B, 0x19, 0x74, 0x01, 0xF0, 0x80, 0x16, 0xED, 0x70, 0x0A, 0x90, 0x8B, 0x16, 0xE0, 0x90, 0x8B,
++0x19, 0xF0, 0x80, 0x05, 0x90, 0x8B, 0x19, 0xED, 0xF0, 0x90, 0x8B, 0x19, 0xE0, 0x90, 0x8B, 0x0B,
++0xF0, 0x22, 0x90, 0x01, 0x37, 0x74, 0x02, 0xF0, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x12, 0x7E,
++0x9A, 0xEF, 0x70, 0x06, 0x90, 0x01, 0xC8, 0x74, 0xFD, 0xF0, 0x7D, 0x02, 0x7F, 0x03, 0x12, 0x31,
++0x9D, 0x12, 0x7C, 0x50, 0x53, 0x22, 0xF0, 0x43, 0x22, 0x02, 0x22, 0xEF, 0x60, 0x0F, 0x74, 0x21,
++0x2D, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x10, 0xF0, 0x22, 0x74, 0x21, 0x2D,
++0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x54, 0xEF, 0xF0, 0x22, 0x90, 0x06, 0x04, 0xE0,
++0x54, 0xBF, 0xF0, 0xEF, 0x60, 0x0A, 0xE5, 0x21, 0xB4, 0x01, 0x05, 0xE4, 0xFF, 0x12, 0x48, 0xB3,
++0x53, 0x22, 0xF0, 0x43, 0x22, 0x0C, 0x22, 0x90, 0x04, 0x1D, 0xE0, 0x70, 0x14, 0x90, 0x8A, 0xF8,
++0xE0, 0xFF, 0xE4, 0xFD, 0x12, 0x5F, 0xFD, 0x8E, 0x69, 0x8F, 0x6A, 0x90, 0x04, 0x1F, 0x74, 0x20,
++0xF0, 0x22, 0x90, 0x8B, 0x52, 0xEF, 0xF0, 0x12, 0x7D, 0x42, 0x90, 0x8B, 0x52, 0xE0, 0x60, 0x05,
++0x90, 0x05, 0x22, 0xE4, 0xF0, 0x53, 0x22, 0xF0, 0x43, 0x22, 0x04, 0x22, 0x90, 0x06, 0x04, 0xE0,
++0x44, 0x40, 0xF0, 0xE5, 0x21, 0xB4, 0x01, 0x05, 0x7F, 0x01, 0x12, 0x48, 0xB3, 0x53, 0x22, 0xF0,
++0x43, 0x22, 0x04, 0x22, 0xE5, 0x23, 0x30, 0xE6, 0x12, 0xE5, 0x23, 0x54, 0x0F, 0xFF, 0x90, 0x01,
++0x2F, 0xE0, 0x54, 0x80, 0x4F, 0x64, 0x80, 0xF0, 0x53, 0x23, 0xBF, 0x22, 0x90, 0x8B, 0x2C, 0xE0,
++0x30, 0xE0, 0x05, 0xAF, 0x23, 0x02, 0x7E, 0x06, 0x7D, 0x01, 0xAF, 0x23, 0x12, 0x45, 0xA2, 0x22,
++0x53, 0x22, 0xF0, 0x43, 0x22, 0x01, 0x12, 0x4B, 0x5A, 0x12, 0x4B, 0x5B, 0x53, 0x22, 0xF0, 0x43,
++0x22, 0x02, 0x22, 0x41, 0x8A, 0xF6, 0x00, 0x41, 0x8B, 0x05, 0x00, 0x41, 0x8B, 0x51, 0x00, 0x41,
++0x8B, 0x53, 0x00, 0x00, 0x90, 0x04, 0x1B, 0xE0, 0x54, 0x7F, 0x64, 0x7F, 0x7F, 0x01, 0x60, 0x02,
++0x7F, 0x00, 0x22, 0xE4, 0x90, 0x8B, 0x1B, 0xF0, 0x90, 0x8B, 0x0C, 0xF0, 0xF5, 0x25, 0x22, 0x90,
++0x8B, 0x13, 0xE0, 0xA3, 0xE0, 0x90, 0x05, 0x58, 0xF0, 0x22, 0x22, 0x22, 0xF0, 0x90, 0x8B, 0x0F,
++0xE0, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB, 0xFD, 0x7F, 0x58, 0x7E, 0x01, 0xD3, 0x10, 0xAF, 0x01,
++0xC3, 0xC0, 0xD0, 0x90, 0x8B, 0x3D, 0xE0, 0xFB, 0xA3, 0xE0, 0xF5, 0x44, 0xE4, 0xF5, 0x45, 0x12,
++0x30, 0x62, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xC0, 0xE0, 0xC0, 0xF0, 0xC0, 0x83, 0xC0, 0x82, 0xC0,
++0xD0, 0x75, 0xD0, 0x00, 0xC0, 0x00, 0xC0, 0x01, 0xC0, 0x02, 0xC0, 0x03, 0xC0, 0x04, 0xC0, 0x05,
++0xC0, 0x06, 0xC0, 0x07, 0x75, 0x0E, 0x00, 0x90, 0x01, 0xC4, 0x74, 0x87, 0xF0, 0x74, 0x4B, 0xA3,
++0xF0, 0x53, 0x91, 0xDF, 0x90, 0x01, 0x3C, 0xE0, 0x55, 0x30, 0xF5, 0x34, 0xA3, 0xE0, 0x55, 0x31,
++0xF5, 0x35, 0xA3, 0xE0, 0x55, 0x32, 0xF5, 0x36, 0xA3, 0xE0, 0x55, 0x33, 0xF5, 0x37, 0xE5, 0x34,
++0x30, 0xE0, 0x51, 0x90, 0x01, 0x3C, 0x74, 0x01, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0x30, 0xE0, 0x1F,
++0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x18, 0x90, 0x8B, 0x34, 0xE4, 0xF0, 0x90, 0x8B, 0x33, 0xE0,
++0x64, 0x03, 0x60, 0x0B, 0x7F, 0x01, 0xB1, 0xE0, 0xEF, 0x70, 0x04, 0x7F, 0x02, 0xD1, 0x89, 0x90,
++0x8B, 0x2C, 0xE0, 0xFF, 0x30, 0xE0, 0x1D, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x16, 0x90, 0x8B,
++0x2E, 0xE4, 0xF0, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x06, 0x60, 0x09, 0xE4, 0xFF, 0xB1, 0xE0, 0xEF,
++0x70, 0x02, 0xD1, 0x56, 0xE5, 0x34, 0x30, 0xE1, 0x08, 0x90, 0x01, 0x3C, 0x74, 0x02, 0xF0, 0x11,
++0x60, 0xE5, 0x34, 0x30, 0xE2, 0x28, 0x90, 0x01, 0x3C, 0x74, 0x04, 0xF0, 0x90, 0x06, 0x92, 0xE0,
++0x30, 0xE0, 0x14, 0x90, 0x8B, 0x3D, 0xE4, 0x71, 0x5C, 0x90, 0x01, 0x5B, 0x74, 0x05, 0xF0, 0x90,
++0x06, 0x92, 0x74, 0x01, 0xF0, 0x80, 0x07, 0x90, 0x8B, 0x18, 0xE4, 0xF0, 0x51, 0xFC, 0xE5, 0x34,
++0x30, 0xE3, 0x38, 0x90, 0x01, 0x3C, 0x74, 0x08, 0xF0, 0x90, 0x06, 0x92, 0xE0, 0x30, 0xE1, 0x24,
++0x90, 0x8B, 0x3D, 0xE4, 0xF0, 0x90, 0x8B, 0x0F, 0xE0, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB, 0xFD,
++0x7F, 0x5C, 0x7E, 0x01, 0x71, 0x6C, 0x90, 0x01, 0x5F, 0x74, 0x05, 0xF0, 0x90, 0x06, 0x92, 0x74,
++0x02, 0xF0, 0x80, 0x07, 0x90, 0x8B, 0x17, 0xE4, 0xF0, 0x51, 0xFC, 0xE5, 0x34, 0x30, 0xE4, 0x09,
++0x90, 0x01, 0x3C, 0x74, 0x10, 0xF0, 0x12, 0x51, 0xC9, 0xE5, 0x34, 0x30, 0xE5, 0x06, 0x90, 0x01,
++0x3C, 0x74, 0x20, 0xF0, 0xE5, 0x35, 0x30, 0xE0, 0x10, 0x90, 0x01, 0x3D, 0x74, 0x01, 0xF0, 0x90,
++0x00, 0x83, 0xE0, 0xF5, 0x23, 0x51, 0xE4, 0x51, 0xFC, 0xE5, 0x35, 0x30, 0xE2, 0x06, 0x90, 0x01,
++0x3D, 0x74, 0x04, 0xF0, 0xE5, 0x35, 0x30, 0xE4, 0x1B, 0x90, 0x01, 0x3D, 0x74, 0x10, 0xF0, 0x90,
++0x8B, 0x05, 0xE0, 0x60, 0x0F, 0xE4, 0xF0, 0x90, 0x05, 0x53, 0xE0, 0x44, 0x01, 0xF0, 0x90, 0x05,
++0xFD, 0xE0, 0x04, 0xF0, 0xE5, 0x36, 0x30, 0xE0, 0x75, 0x90, 0x01, 0x3E, 0x74, 0x01, 0xF0, 0x90,
++0x8B, 0x32, 0xE0, 0x30, 0xE0, 0x18, 0x90, 0x8B, 0x36, 0xE4, 0xF0, 0x90, 0x8B, 0x33, 0xE0, 0x64,
++0x03, 0x60, 0x0B, 0x7F, 0x01, 0xB1, 0xE0, 0xEF, 0x60, 0x04, 0x7F, 0x01, 0xD1, 0x89, 0x90, 0x8B,
++0x2C, 0xE0, 0x30, 0xE0, 0x49, 0x90, 0x8B, 0x30, 0xE4, 0xF0, 0xFF, 0xB1, 0xE0, 0xEF, 0x60, 0x3E,
++0x12, 0x65, 0x5F, 0x90, 0x8B, 0x2D, 0xE0, 0xFF, 0x64, 0x06, 0x60, 0x32, 0xEF, 0xB4, 0x04, 0x02,
++0x80, 0x07, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x04, 0xE4, 0xFF, 0x80, 0x14, 0x90, 0x8B, 0x2D,
++0xE0, 0xB4, 0x03, 0x04, 0x7F, 0x01, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02, 0x05, 0x7F,
++0x01, 0x12, 0x65, 0x82, 0x7D, 0x01, 0xAF, 0x23, 0x12, 0x45, 0xA2, 0x12, 0x7D, 0xC1, 0xE5, 0x36,
++0x30, 0xE1, 0x47, 0x90, 0x01, 0x3E, 0x74, 0x02, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0x30, 0xE0, 0x19,
++0x90, 0x8B, 0x36, 0x74, 0x01, 0xF0, 0x90, 0x8B, 0x33, 0xE0, 0x64, 0x03, 0x60, 0x0B, 0x7F, 0x01,
++0xB1, 0xE0, 0xEF, 0x70, 0x04, 0x7F, 0x02, 0xD1, 0x89, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x1A,
++0x90, 0x8B, 0x30, 0x74, 0x01, 0xF0, 0x12, 0x7E, 0x2B, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x06, 0x60,
++0x09, 0xE4, 0xFF, 0xB1, 0xE0, 0xEF, 0x70, 0x02, 0xD1, 0x56, 0x74, 0x87, 0x04, 0x90, 0x01, 0xC4,
++0xF0, 0x74, 0x4B, 0xA3, 0xF0, 0xD0, 0x07, 0xD0, 0x06, 0xD0, 0x05, 0xD0, 0x04, 0xD0, 0x03, 0xD0,
++0x02, 0xD0, 0x01, 0xD0, 0x00, 0xD0, 0xD0, 0xD0, 0x82, 0xD0, 0x83, 0xD0, 0xF0, 0xD0, 0xE0, 0x32,
++0xEF, 0x64, 0x01, 0x70, 0x3D, 0x90, 0x8B, 0x35, 0xE0, 0x60, 0x03, 0x7F, 0x00, 0x22, 0x90, 0x8B,
++0x08, 0xE0, 0x60, 0x03, 0x7F, 0x01, 0x22, 0x90, 0x8B, 0x34, 0xE0, 0x60, 0x03, 0x7F, 0x01, 0x22,
++0x90, 0x8B, 0x32, 0xE0, 0xFF, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x0B, 0xEF, 0xC4, 0x13, 0x54,
++0x07, 0x30, 0xE0, 0x03, 0x7F, 0x00, 0x22, 0x90, 0x8B, 0x36, 0xE0, 0x7F, 0x01, 0x60, 0x36, 0x7F,
++0x00, 0x22, 0x90, 0x8B, 0x2F, 0xE0, 0x60, 0x03, 0x7F, 0x00, 0x22, 0x90, 0x8B, 0x08, 0xE0, 0x60,
++0x03, 0x7F, 0x01, 0x22, 0x90, 0x8B, 0x2E, 0xE0, 0x60, 0x03, 0x7F, 0x01, 0x22, 0x90, 0x8B, 0x2C,
++0xE0, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x03, 0x7F, 0x00, 0x22, 0x90, 0x8B, 0x30, 0xE0, 0x7F,
++0x01, 0x60, 0x02, 0x7F, 0x00, 0x22, 0x90, 0x8B, 0x0D, 0xE0, 0x60, 0x16, 0x90, 0x8B, 0x2D, 0xE0,
++0x70, 0x04, 0x7F, 0x05, 0x80, 0x1F, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x01, 0x70, 0x1A, 0x7F, 0x02,
++0x80, 0x13, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x01, 0x04, 0x7F, 0x03, 0x80, 0x08, 0x90, 0x8B, 0x2D,
++0xE0, 0x70, 0x05, 0x7F, 0x04, 0x12, 0x65, 0x82, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0,
++0x90, 0x8B, 0x33, 0xE0, 0x90, 0x8B, 0x55, 0xF0, 0x6F, 0x70, 0x02, 0xE1, 0x55, 0xEF, 0x14, 0x60,
++0x3B, 0x14, 0x60, 0x5F, 0x14, 0x70, 0x02, 0xE1, 0x30, 0x24, 0x03, 0x60, 0x02, 0xE1, 0x55, 0x90,
++0x8B, 0x55, 0xE0, 0xB4, 0x03, 0x04, 0xF1, 0xC2, 0xE1, 0x55, 0x90, 0x8B, 0x55, 0xE0, 0xB4, 0x02,
++0x04, 0xF1, 0xAF, 0xE1, 0x55, 0x90, 0x8B, 0x55, 0xE0, 0xB4, 0x04, 0x04, 0xF1, 0xC6, 0xE1, 0x55,
++0x90, 0x8B, 0x55, 0xE0, 0x64, 0x01, 0x70, 0x7D, 0xF1, 0xB1, 0x80, 0x79, 0x90, 0x8B, 0x55, 0xE0,
++0xFF, 0xB4, 0x03, 0x04, 0xF1, 0xCA, 0x80, 0x6D, 0xEF, 0xB4, 0x02, 0x04, 0xF1, 0xA1, 0x80, 0x65,
++0x90, 0x8B, 0x55, 0xE0, 0xFF, 0xB4, 0x04, 0x04, 0xF1, 0xD5, 0x80, 0x59, 0xEF, 0x70, 0x56, 0xF1,
++0x8E, 0x80, 0x52, 0x90, 0x8B, 0x55, 0xE0, 0xB4, 0x03, 0x05, 0x12, 0x7C, 0x41, 0x80, 0x46, 0x90,
++0x8B, 0x55, 0xE0, 0xB4, 0x01, 0x04, 0xF1, 0x72, 0x80, 0x3B, 0x90, 0x8B, 0x55, 0xE0, 0xB4, 0x04,
++0x05, 0x12, 0x7D, 0x23, 0x80, 0x2F, 0x90, 0x8B, 0x55, 0xE0, 0x70, 0x29, 0xF1, 0x70, 0x80, 0x25,
++0x90, 0x8B, 0x55, 0xE0, 0xFF, 0xB4, 0x01, 0x04, 0xF1, 0x5A, 0x80, 0x19, 0xEF, 0xB4, 0x02, 0x04,
++0xF1, 0x6B, 0x80, 0x11, 0x90, 0x8B, 0x55, 0xE0, 0xFF, 0xB4, 0x04, 0x04, 0xF1, 0x5A, 0x80, 0x05,
++0xEF, 0x70, 0x02, 0xF1, 0x67, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, 0x05, 0x22, 0x74, 0x6F, 0xF0,
++0x90, 0x8B, 0x33, 0x74, 0x03, 0xF0, 0x22, 0xF1, 0x8E, 0x80, 0xEF, 0x12, 0x7D, 0x42, 0x80, 0xEA,
++0xF1, 0x8E, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x12, 0x7E, 0x9A, 0xEF, 0x70, 0x06, 0x90, 0x01,
++0xC8, 0x74, 0xFD, 0xF0, 0x12, 0x7C, 0x50, 0x90, 0x8B, 0x33, 0x74, 0x02, 0xF0, 0x22, 0x90, 0x01,
++0x3E, 0x74, 0x03, 0xF0, 0xFD, 0x7F, 0x02, 0x12, 0x31, 0xB7, 0x90, 0x8B, 0x33, 0x74, 0x01, 0xF0,
++0x22, 0x12, 0x7D, 0x42, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x33, 0x04, 0xF0, 0x22, 0xF1,
++0xA1, 0x7D, 0x03, 0x7F, 0x02, 0x12, 0x31, 0x49, 0x90, 0x05, 0x27, 0xE4, 0xF0, 0x90, 0x8B, 0x33,
++0xF0, 0x22, 0xF1, 0xCA, 0x80, 0xEB, 0xF1, 0xD5, 0x80, 0xE7, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90,
++0x8B, 0x33, 0x04, 0xF0, 0x22, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x33, 0x04, 0xF0, 0x22,
++0xF1, 0x8E, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x90, 0x8B, 0x33, 0x74, 0x04, 0xF0, 0x22, 0x90,
++0x02, 0x84, 0xEF, 0xF0, 0xA3, 0xEE, 0xF0, 0xA3, 0x74, 0x05, 0xF0, 0x22, 0xEF, 0x8E, 0xF0, 0x12,
++0x43, 0xBA, 0x50, 0x1A, 0x00, 0x40, 0x50, 0x42, 0x00, 0x80, 0x50, 0x6D, 0x01, 0x00, 0x50, 0x81,
++0x02, 0x00, 0x50, 0x99, 0x04, 0x00, 0x00, 0x00, 0x50, 0xB6, 0xED, 0x54, 0x3F, 0x70, 0x04, 0xFE,
++0xFF, 0x80, 0x04, 0x7E, 0x00, 0x7F, 0x40, 0xEF, 0x2D, 0xFF, 0xEE, 0x3C, 0xFE, 0xEF, 0x78, 0x06,
++0xCE, 0xC3, 0x13, 0xCE, 0x13, 0xD8, 0xF9, 0x78, 0x06, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9,
++0x80, 0x26, 0xED, 0x54, 0x7F, 0x70, 0x04, 0xFE, 0xFF, 0x80, 0x04, 0x7E, 0x00, 0x7F, 0x80, 0xEF,
++0x2D, 0xFF, 0xEE, 0x3C, 0xFE, 0xEF, 0x78, 0x07, 0xCE, 0xC3, 0x13, 0xCE, 0x13, 0xD8, 0xF9, 0x78,
++0x07, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFD, 0xAC, 0x06, 0x80, 0x49, 0xED, 0x70, 0x04,
++0xFE, 0xFF, 0x80, 0x04, 0x7E, 0x01, 0x7F, 0x00, 0xEF, 0x2D, 0xEE, 0x3C, 0x7D, 0x00, 0xFC, 0x80,
++0x35, 0xEC, 0x54, 0x01, 0x4D, 0x70, 0x04, 0xFE, 0xFF, 0x80, 0x04, 0x7E, 0x02, 0x7F, 0x00, 0xEF,
++0x2D, 0xEE, 0x3C, 0xC3, 0x13, 0x7D, 0x00, 0x80, 0x1A, 0xEC, 0x54, 0x03, 0x4D, 0x70, 0x04, 0xFE,
++0xFF, 0x80, 0x04, 0x7E, 0x04, 0x7F, 0x00, 0xEF, 0x2D, 0xEE, 0x3C, 0x13, 0x13, 0x54, 0x3F, 0x7D,
++0x00, 0x25, 0xE0, 0x25, 0xE0, 0xFC, 0xAE, 0x04, 0xAF, 0x05, 0x22, 0x90, 0x01, 0xE4, 0x74, 0x58,
++0xF0, 0xA3, 0x74, 0x02, 0xF0, 0x22, 0xE4, 0x90, 0x8A, 0xCC, 0xF0, 0xA3, 0xF0, 0x75, 0x8E, 0x02,
++0x91, 0x0E, 0x12, 0x68, 0x44, 0x90, 0x8B, 0x07, 0xEF, 0xF0, 0x12, 0x68, 0x51, 0x90, 0x8B, 0x09,
++0xEF, 0xF0, 0x12, 0x68, 0x5D, 0x90, 0x8A, 0xF4, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0xE4, 0xF5, 0x55,
++0xF5, 0x21, 0x12, 0x72, 0x55, 0x12, 0x44, 0x9E, 0x12, 0x2E, 0x01, 0x7F, 0x03, 0x12, 0x78, 0x42,
++0x12, 0x7C, 0x3D, 0x12, 0x68, 0x0A, 0x12, 0x68, 0x75, 0x12, 0x68, 0x8A, 0x12, 0x68, 0x28, 0x12,
++0x68, 0x43, 0x90, 0x8A, 0xCE, 0xE5, 0xD9, 0xF0, 0x31, 0x5F, 0xC2, 0xAF, 0x90, 0x00, 0x80, 0xE0,
++0x44, 0x40, 0xF0, 0x51, 0x0E, 0x75, 0xE8, 0x03, 0x43, 0xA8, 0x85, 0xD2, 0xAF, 0x11, 0xBB, 0x90,
++0x8A, 0xCC, 0xE0, 0x64, 0x01, 0xF0, 0x24, 0xC6, 0x90, 0x01, 0xC4, 0xF0, 0x74, 0x50, 0xA3, 0xF0,
++0xE5, 0x55, 0x30, 0xE4, 0x09, 0xC2, 0xAF, 0x53, 0x55, 0xEF, 0xD2, 0xAF, 0xB1, 0x59, 0xE5, 0x55,
++0x30, 0xE6, 0xDC, 0xC2, 0xAF, 0x53, 0x55, 0xBF, 0xD2, 0xAF, 0x12, 0x6B, 0xBD, 0x80, 0xD0, 0x90,
++0x01, 0x3C, 0x74, 0xFF, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0x90, 0x01, 0x34, 0xF0, 0xA3, 0xF0, 0xA3,
++0xF0, 0xA3, 0xF0, 0xFD, 0x7F, 0x54, 0x31, 0x88, 0x7D, 0xFF, 0x7F, 0x55, 0x31, 0x88, 0x7D, 0xFF,
++0x7F, 0x56, 0x31, 0x88, 0x7D, 0xFF, 0x7F, 0x57, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x8F,
++0x82, 0x75, 0x83, 0x00, 0xED, 0xF0, 0x51, 0x0E, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, 0x01, 0x30,
++0xE4, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0x90, 0x01, 0x38, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0,
++0xA3, 0xF0, 0xFD, 0x7F, 0x50, 0x31, 0x88, 0xE4, 0xFD, 0x7F, 0x51, 0x31, 0x88, 0xE4, 0xFD, 0x7F,
++0x52, 0x31, 0x88, 0xE4, 0xFD, 0x7F, 0x53, 0x80, 0xBF, 0xE5, 0x5E, 0x64, 0x01, 0x70, 0x3B, 0x71,
++0x4E, 0xBF, 0x01, 0x04, 0x7F, 0x01, 0x71, 0x42, 0x90, 0x00, 0x46, 0xE0, 0x44, 0x04, 0xFD, 0x7F,
++0x46, 0x31, 0x88, 0x90, 0x00, 0x44, 0xE0, 0x54, 0xFB, 0xFD, 0x7F, 0x44, 0x31, 0x88, 0x90, 0x00,
++0x46, 0xE0, 0x54, 0xFB, 0xFD, 0x7F, 0x46, 0x31, 0x88, 0x7F, 0x02, 0x71, 0x6A, 0x8F, 0x62, 0x90,
++0x01, 0xC9, 0xE5, 0x62, 0xF0, 0xB4, 0x01, 0x02, 0x51, 0xE2, 0x22, 0xE0, 0x5F, 0xF0, 0xD3, 0x10,
++0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x7F, 0x10, 0xDF, 0xFE, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xD3, 0x10,
++0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8A, 0xE0, 0xED, 0xF0, 0x90, 0x8A, 0xDF, 0xEF, 0xF0, 0xD3,
++0x94, 0x07, 0x50, 0x4E, 0xA3, 0xE0, 0x70, 0x1A, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74, 0x01, 0xA8,
++0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x47, 0xE0, 0x5F, 0xF0,
++0x80, 0x17, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33,
++0xD8, 0xFC, 0xFF, 0x90, 0x00, 0x47, 0xE0, 0x4F, 0xF0, 0x51, 0x0E, 0x90, 0x8A, 0xDF, 0xE0, 0xFF,
++0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x46,
++0x80, 0x59, 0x90, 0x8A, 0xDF, 0xE0, 0x24, 0xF8, 0xF0, 0xA3, 0xE0, 0x70, 0x1D, 0x90, 0x8A, 0xDF,
++0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xC4, 0x54, 0xF0,
++0xF4, 0xFF, 0x90, 0x00, 0x43, 0xE0, 0x5F, 0xF0, 0x80, 0x1A, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74,
++0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xC4, 0x54, 0xF0, 0xFF, 0x90, 0x00,
++0x43, 0xE0, 0x4F, 0xF0, 0x51, 0x0E, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08,
++0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x43, 0x51, 0x0B, 0xD0, 0xD0, 0x92,
++0xAF, 0x22, 0x90, 0x00, 0x49, 0xE0, 0x90, 0x8B, 0x54, 0xF0, 0xE0, 0x54, 0x0F, 0xF0, 0x44, 0xF0,
++0xFD, 0x7F, 0x49, 0x31, 0x88, 0x90, 0x8B, 0x54, 0xE0, 0x44, 0xB0, 0xFD, 0x7F, 0x49, 0x21, 0x88,
++0x90, 0x8A, 0xDD, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0x75, 0x5E, 0x01, 0x8E, 0x5F, 0xF5, 0x60, 0xE4,
++0xFD, 0x7F, 0x0B, 0x51, 0x1E, 0xE4, 0xFD, 0x7F, 0x02, 0x51, 0x1E, 0x71, 0x4E, 0xE4, 0xFF, 0x71,
++0x42, 0xE4, 0xF5, 0x62, 0x90, 0x01, 0xC9, 0xE5, 0x62, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0xFC, 0xA3,
++0xE0, 0xFD, 0xEC, 0xFB, 0x8D, 0x44, 0xE4, 0xF5, 0x45, 0x7D, 0x01, 0x7F, 0x60, 0x7E, 0x01, 0x02,
++0x30, 0x62, 0x90, 0x01, 0xCA, 0xE5, 0x61, 0xF0, 0xEF, 0x60, 0x02, 0x51, 0xE2, 0x22, 0x7F, 0x0B,
++0x71, 0x6A, 0xEF, 0x65, 0x61, 0x60, 0x10, 0xE5, 0x61, 0xB4, 0x01, 0x05, 0xE4, 0xF5, 0x61, 0x80,
++0x03, 0x75, 0x61, 0x01, 0x7F, 0x01, 0x22, 0x7F, 0x00, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0,
++0xD0, 0x90, 0x8B, 0x57, 0xEF, 0xF0, 0xD3, 0x94, 0x07, 0x50, 0x43, 0xE0, 0xFF, 0x74, 0x01, 0xA8,
++0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x46, 0x51, 0x0B, 0x90,
++0x8B, 0x57, 0xE0, 0xFD, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x05, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE,
++0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0x90, 0x00, 0x44, 0xE0, 0xFB, 0xE4, 0xFE, 0xEF, 0x5B, 0xA8, 0x05,
++0x08, 0x80, 0x06, 0xCE, 0xA2, 0xE7, 0x13, 0xCE, 0x13, 0xD8, 0xF8, 0xFF, 0x80, 0x4B, 0x90, 0x8B,
++0x57, 0xE0, 0x24, 0xF8, 0xF0, 0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33,
++0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x43, 0xE0, 0x5F, 0xF0, 0x51, 0x0E, 0x90, 0x8B, 0x57, 0xE0,
++0xFD, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x05, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8,
++0xF9, 0xFF, 0x90, 0x00, 0x42, 0xE0, 0xFB, 0xE4, 0xFE, 0xEF, 0x5B, 0xA8, 0x05, 0x08, 0x80, 0x06,
++0xCE, 0xA2, 0xE7, 0x13, 0xCE, 0x13, 0xD8, 0xF8, 0xFF, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xE4, 0x90,
++0x8B, 0x04, 0xF0, 0x90, 0x00, 0x80, 0xE0, 0x44, 0x80, 0xFD, 0x7F, 0x80, 0x21, 0x88, 0xD3, 0x10,
++0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x8B, 0x90, 0x8A, 0xDA, 0x12, 0x43,
++0x6B, 0x90, 0x00, 0x01, 0x12, 0x42, 0xC2, 0xFA, 0xE5, 0xF0, 0x24, 0x00, 0xFF, 0xE4, 0x3A, 0xFE,
++0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x01, 0xEE, 0x8F, 0xF0, 0x12, 0x43, 0x19, 0x12,
++0x24, 0x62, 0xFF, 0x60, 0x2C, 0xB5, 0x5E, 0x16, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x90, 0x00,
++0x01, 0x12, 0x42, 0xC2, 0x65, 0x60, 0x70, 0x04, 0xE5, 0x5F, 0x65, 0xF0, 0x60, 0x22, 0x90, 0x8A,
++0xDA, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x01, 0x12, 0x42, 0xC2, 0xFF, 0xAE, 0xF0, 0x71, 0x00, 0x80,
++0x0F, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x12, 0x24, 0x62, 0x65, 0x5E, 0x60, 0x02, 0x91, 0x95,
++0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xE4, 0xF5, 0x5E, 0x7F, 0x60, 0x7E, 0x01, 0x8F, 0x82, 0x8E, 0x83,
++0xA3, 0xA3, 0xA3, 0xE4, 0xF0, 0x22, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x8B, 0xEF, 0x12, 0x43, 0x94,
++0x54, 0xE7, 0x01, 0x54, 0xDE, 0x02, 0x55, 0x0B, 0x03, 0x55, 0x14, 0x05, 0x55, 0x1D, 0x06, 0x55,
++0x58, 0x07, 0x55, 0x25, 0x08, 0x55, 0x2E, 0x09, 0x55, 0x36, 0x20, 0x55, 0x3F, 0x2C, 0x54, 0xF0,
++0x2D, 0x54, 0xF9, 0x2E, 0x55, 0x02, 0x3B, 0x55, 0x48, 0x4B, 0x00, 0x00, 0x55, 0x51, 0x90, 0x8A,
++0xD7, 0x12, 0x43, 0x6B, 0x02, 0x74, 0x85, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x74, 0x8B,
++0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x74, 0xB8, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02,
++0x75, 0x00, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x75, 0x39, 0x90, 0x8A, 0xD7, 0x12, 0x43,
++0x6B, 0x02, 0x75, 0x52, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x74, 0x0F, 0x90, 0x8A, 0xD7,
++0x12, 0x43, 0x6B, 0xC1, 0xA6, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x75, 0x9A, 0x90, 0x8A,
++0xD7, 0x12, 0x43, 0x6B, 0x81, 0x1E, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x78, 0x81, 0x90,
++0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x7A, 0xC2, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x7C,
++0x2B, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x01, 0xF0, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0,
++0x90, 0x01, 0xCC, 0xE0, 0x54, 0x0F, 0x90, 0x8A, 0xCF, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFD, 0x70,
++0x02, 0xC1, 0xA1, 0x90, 0x8B, 0x51, 0xE0, 0xFF, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80,
++0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0xEF, 0x5D, 0x70, 0x02, 0xC1, 0x9A, 0x90,
++0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD0, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD0,
++0xF0, 0x75, 0x1D, 0x01, 0x75, 0x1E, 0x8A, 0x75, 0x1F, 0xD0, 0x75, 0x20, 0x01, 0x7B, 0x01, 0x7A,
++0x8A, 0x79, 0xD1, 0x12, 0x5E, 0xE4, 0x90, 0x8A, 0xD1, 0xE0, 0xFF, 0xC4, 0x13, 0x13, 0x13, 0x54,
++0x01, 0x90, 0x8B, 0x51, 0x30, 0xE0, 0x59, 0xE0, 0x75, 0xF0, 0x02, 0x90, 0x00, 0x88, 0x12, 0x43,
++0x5F, 0xE0, 0x90, 0x8A, 0xD2, 0xF0, 0x90, 0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x02, 0x90, 0x00, 0x89,
++0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD3, 0xF0, 0x90, 0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x04, 0x90,
++0x01, 0xD1, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD4, 0xF0, 0x90, 0x8B, 0x51, 0xE0, 0x75, 0xF0,
++0x04, 0x90, 0x01, 0xD2, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD5, 0xF0, 0x90, 0x8B, 0x51, 0xE0,
++0x75, 0xF0, 0x04, 0x90, 0x01, 0xD3, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD6, 0xF0, 0x80, 0x33,
++0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD1, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD2, 0xF0, 0x90,
++0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD2, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD3,
++0xF0, 0x90, 0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD3, 0x12, 0x43, 0x5F, 0xE0, 0x90,
++0x8A, 0xD4, 0xF0, 0xEF, 0x54, 0x7F, 0xFF, 0x7B, 0x01, 0x7A, 0x8A, 0x79, 0xD2, 0x91, 0xA6, 0x90,
++0x8A, 0xCF, 0xE0, 0xFF, 0x90, 0x8B, 0x51, 0xE0, 0xFE, 0x74, 0x01, 0xA8, 0x06, 0x08, 0x80, 0x02,
++0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0x5F, 0x90, 0x8A, 0xCF, 0xF0, 0x90, 0x8B, 0x51, 0xE0, 0xFF, 0x74,
++0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0x90, 0x01, 0xCC, 0xF0, 0x90, 0x8B,
++0x51, 0xE0, 0x04, 0xF0, 0xE0, 0x54, 0x03, 0xF0, 0xA1, 0x6A, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x02,
++0xF0, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, 0x00, 0x04, 0x12, 0x42, 0x20, 0xFF, 0x54, 0x1F, 0xFE,
++0xEF, 0x54, 0x20, 0xC4, 0x13, 0x54, 0x07, 0xFD, 0xAF, 0x06, 0x90, 0x8A, 0xDA, 0xEF, 0xF0, 0xA3,
++0xED, 0xF0, 0xA3, 0x12, 0x43, 0x8B, 0x90, 0x8A, 0xDC, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x03, 0x12,
++0x42, 0x20, 0x54, 0xF0, 0xC4, 0x54, 0x0F, 0x90, 0x8A, 0xDF, 0xF0, 0x90, 0x00, 0x04, 0x12, 0x42,
++0x20, 0x54, 0x40, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x90, 0x8A, 0xE0, 0xF0, 0x90, 0x8A, 0xDA, 0xE0,
++0xFF, 0x75, 0xF0, 0x09, 0x90, 0x87, 0x25, 0x12, 0x43, 0x5F, 0xAD, 0x82, 0xAC, 0x83, 0x90, 0x8A,
++0xE1, 0xEC, 0xF0, 0xA3, 0xED, 0xF0, 0xEF, 0x75, 0xF0, 0x09, 0xA4, 0x24, 0x23, 0xF9, 0x74, 0x87,
++0x35, 0xF0, 0xFA, 0x7B, 0x01, 0xA3, 0x12, 0x43, 0x8B, 0x90, 0x8A, 0xDC, 0x12, 0x43, 0x6B, 0x90,
++0x00, 0x03, 0x12, 0x42, 0x20, 0x54, 0x0F, 0xFF, 0x90, 0x8A, 0xE3, 0x12, 0x43, 0x6B, 0xEF, 0x12,
++0x42, 0x4D, 0x90, 0x8A, 0xDC, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFF, 0x90,
++0x8A, 0xE3, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x01, 0xEF, 0x12, 0x42, 0x5F, 0x90, 0x8A, 0xDC, 0x12,
++0x43, 0x6B, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0xFF, 0x90, 0x8A, 0xE1, 0xE0, 0xFC, 0xA3, 0xE0,
++0xFD, 0xF5, 0x82, 0x8C, 0x83, 0xEF, 0xF0, 0x12, 0x24, 0x62, 0x8D, 0x82, 0x8C, 0x83, 0xA3, 0xF0,
++0x90, 0x8A, 0xDF, 0xE0, 0xFE, 0x90, 0x8A, 0xDA, 0xE0, 0xFF, 0x24, 0xC1, 0xF5, 0x82, 0xE4, 0x34,
++0x86, 0xF5, 0x83, 0xEE, 0xF0, 0x90, 0x8A, 0xDB, 0xE0, 0xFE, 0x75, 0xF0, 0x09, 0xEF, 0x90, 0x87,
++0x29, 0x12, 0x43, 0x5F, 0xEE, 0xF0, 0x75, 0xF0, 0x09, 0xEF, 0x90, 0x87, 0x2A, 0x12, 0x43, 0x5F,
++0x74, 0x01, 0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0xFE, 0x75, 0xF0, 0x09, 0xEF, 0x90, 0x87, 0x2B, 0x12,
++0x43, 0x5F, 0xEE, 0xF0, 0x8F, 0x0F, 0xEF, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89,
++0xAF, 0x82, 0xF5, 0x10, 0x8F, 0x11, 0xE5, 0x0F, 0x75, 0xF0, 0x02, 0xA4, 0x24, 0x81, 0xF9, 0x74,
++0x86, 0x35, 0xF0, 0x75, 0x12, 0x01, 0xF5, 0x13, 0x89, 0x14, 0x75, 0xF0, 0x09, 0xE5, 0x0F, 0x90,
++0x87, 0x25, 0x12, 0x43, 0x5F, 0xAF, 0x82, 0x85, 0x83, 0x15, 0x8F, 0x16, 0xE5, 0x0F, 0x75, 0xF0,
++0x09, 0xA4, 0x24, 0x23, 0xF9, 0x74, 0x87, 0x35, 0xF0, 0x75, 0x17, 0x01, 0xF5, 0x18, 0x89, 0x19,
++0x74, 0xC1, 0x25, 0x0F, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0x12, 0x43, 0x94, 0x58,
++0x34, 0x00, 0x58, 0x49, 0x01, 0x58, 0x5E, 0x02, 0x58, 0x73, 0x03, 0x58, 0x9C, 0x04, 0x58, 0xB1,
++0x05, 0x58, 0xC6, 0x06, 0x58, 0xEC, 0x0C, 0x59, 0x19, 0x0D, 0x59, 0x46, 0x0E, 0x59, 0x73, 0x0F,
++0x00, 0x00, 0x59, 0xA7, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5,
++0x83, 0x74, 0xF0, 0xF0, 0xA3, 0x74, 0x15, 0x80, 0x3C, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5,
++0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0x74, 0xF0, 0xF0, 0xA3, 0x74, 0x10, 0x80, 0x27, 0xE5, 0x0F,
++0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0x74, 0xF0, 0xF0, 0xA3, 0x74,
++0x05, 0x80, 0x12, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83,
++0x74, 0xF0, 0xF0, 0xA3, 0xE4, 0xF0, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34,
++0x86, 0xF5, 0x83, 0x74, 0x0F, 0xF0, 0xA3, 0x74, 0x8F, 0xF0, 0x21, 0xA7, 0xE5, 0x0F, 0x25, 0xE0,
++0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0x74, 0x0F, 0xF0, 0xA3, 0x74, 0xF5, 0x80,
++0x27, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0x74, 0x0F,
++0xF0, 0xA3, 0x74, 0xF0, 0x80, 0x12, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34,
++0x89, 0xF5, 0x83, 0xE4, 0xF0, 0xA3, 0x74, 0x0D, 0xF0, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81, 0xF5,
++0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0x21, 0xA7, 0x90, 0x04, 0x47, 0xE0,
++0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x12, 0x42, 0x4D, 0x90, 0x04, 0x46, 0xE0, 0xAB, 0x12, 0xAA,
++0x13, 0xA9, 0x14, 0x90, 0x00, 0x01, 0x12, 0x42, 0x5F, 0x90, 0x04, 0x45, 0xE0, 0x85, 0x11, 0x82,
++0x85, 0x10, 0x83, 0xF0, 0x90, 0x04, 0x44, 0x21, 0x9E, 0x90, 0x04, 0x4B, 0xE0, 0xAB, 0x12, 0xAA,
++0x13, 0xA9, 0x14, 0x12, 0x42, 0x4D, 0x90, 0x04, 0x4A, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14,
++0x90, 0x00, 0x01, 0x12, 0x42, 0x5F, 0x90, 0x04, 0x49, 0xE0, 0x85, 0x11, 0x82, 0x85, 0x10, 0x83,
++0xF0, 0x90, 0x04, 0x48, 0x80, 0x58, 0x90, 0x04, 0x4F, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14,
++0x12, 0x42, 0x4D, 0x90, 0x04, 0x4E, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x01,
++0x12, 0x42, 0x5F, 0x90, 0x04, 0x4D, 0xE0, 0x85, 0x11, 0x82, 0x85, 0x10, 0x83, 0xF0, 0x90, 0x04,
++0x4C, 0x80, 0x2B, 0x90, 0x04, 0x53, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x12, 0x42, 0x4D,
++0x90, 0x04, 0x52, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x01, 0x12, 0x42, 0x5F,
++0x90, 0x04, 0x51, 0xE0, 0x85, 0x11, 0x82, 0x85, 0x10, 0x83, 0xF0, 0x90, 0x04, 0x50, 0xE0, 0x85,
++0x11, 0x82, 0x85, 0x10, 0x83, 0xA3, 0xF0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0xC0, 0x03, 0xC0,
++0x02, 0xC0, 0x01, 0x12, 0x24, 0x62, 0xFF, 0xAB, 0x17, 0xAA, 0x18, 0xA9, 0x19, 0x12, 0x24, 0x62,
++0x5F, 0xD0, 0x01, 0xD0, 0x02, 0xD0, 0x03, 0x12, 0x42, 0x4D, 0xAB, 0x12, 0xE5, 0x14, 0x24, 0x01,
++0xF9, 0xE4, 0x35, 0x13, 0xFA, 0xC0, 0x03, 0xC0, 0x02, 0xC0, 0x01, 0x12, 0x24, 0x62, 0xFF, 0xAB,
++0x17, 0xAA, 0x18, 0xA9, 0x19, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0x5F, 0xD0, 0x01, 0xD0, 0x02,
++0xD0, 0x03, 0x12, 0x42, 0x4D, 0x85, 0x11, 0x82, 0x85, 0x10, 0x83, 0xC0, 0x83, 0xC0, 0x82, 0xE0,
++0xFF, 0x85, 0x16, 0x82, 0x85, 0x15, 0x83, 0xE0, 0xFE, 0xEF, 0x5E, 0xD0, 0x82, 0xD0, 0x83, 0xF0,
++0x85, 0x11, 0x82, 0x85, 0x10, 0x83, 0xA3, 0xC0, 0x83, 0xC0, 0x82, 0xE0, 0xFF, 0x85, 0x16, 0x82,
++0x85, 0x15, 0x83, 0xA3, 0xE0, 0xFE, 0xEF, 0x5E, 0xD0, 0x82, 0xD0, 0x83, 0xF0, 0xE5, 0x0F, 0x25,
++0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0xFE, 0xA3, 0xE0, 0x4E, 0x60,
++0x4B, 0x90, 0x8A, 0xE6, 0x74, 0x0B, 0xF0, 0x90, 0x8A, 0xE6, 0xE0, 0xFF, 0xC3, 0x94, 0x00, 0x50,
++0x02, 0x41, 0xEC, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33,
++0xCE, 0xD8, 0xF9, 0xFF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5,
++0x83, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x60, 0x0A, 0x90, 0x8A, 0xE6, 0xE0, 0x24, 0x10,
++0xA3, 0xF0, 0x80, 0x68, 0x90, 0x8A, 0xE6, 0xE0, 0x14, 0xF0, 0x80, 0xBB, 0xE5, 0x0F, 0x25, 0xE0,
++0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFE, 0xA3, 0xE0, 0x4E, 0x60, 0x47,
++0x90, 0x8A, 0xE6, 0x74, 0x0F, 0xF0, 0x90, 0x8A, 0xE6, 0xE0, 0xFF, 0xC3, 0x94, 0x00, 0x40, 0x3C,
++0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9,
++0xFF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0x5E,
++0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x60, 0x08, 0x90, 0x8A, 0xE6, 0xE0, 0xA3, 0xF0, 0x80, 0x0D, 0x90,
++0x8A, 0xE6, 0xE0, 0x14, 0xF0, 0x80, 0xBF, 0xE4, 0x90, 0x8A, 0xE7, 0xF0, 0xE5, 0x0F, 0x25, 0xE0,
++0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFE, 0xA3, 0xE0, 0x4E, 0x60, 0x46,
++0xE4, 0x90, 0x8A, 0xE6, 0xF0, 0x90, 0x8A, 0xE6, 0xE0, 0xFF, 0xC3, 0x94, 0x10, 0x40, 0x02, 0x61,
++0xA5, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8,
++0xF9, 0xFF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0,
++0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x60, 0x06, 0x90, 0x8A, 0xE6, 0xE0, 0x80, 0x63, 0x90, 0x8A,
++0xE6, 0xE0, 0x04, 0xF0, 0x80, 0xBF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34,
++0x86, 0xF5, 0x83, 0xE0, 0xFE, 0xA3, 0xE0, 0x4E, 0x60, 0x46, 0xE4, 0x90, 0x8A, 0xE6, 0xF0, 0x90,
++0x8A, 0xE6, 0xE0, 0xFF, 0xC3, 0x94, 0x0C, 0x50, 0x3C, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08,
++0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81,
++0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x60, 0x08,
++0x90, 0x8A, 0xE6, 0xE0, 0x24, 0x10, 0x80, 0x09, 0x90, 0x8A, 0xE6, 0xE0, 0x04, 0xF0, 0x80, 0xBF,
++0xE4, 0x90, 0x8A, 0xE8, 0xF0, 0x90, 0x8A, 0xE7, 0xE0, 0xFF, 0x75, 0xF0, 0x09, 0xE5, 0x0F, 0x90,
++0x87, 0x27, 0x12, 0x43, 0x5F, 0xEF, 0xF0, 0x90, 0x8A, 0xE8, 0xE0, 0xFE, 0x75, 0xF0, 0x09, 0xE5,
++0x0F, 0x90, 0x87, 0x28, 0x12, 0x43, 0x5F, 0xEE, 0xF0, 0xE5, 0x0F, 0xC3, 0x94, 0x20, 0x50, 0x32,
++0x74, 0x84, 0x25, 0x0F, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE0, 0xD3, 0x9F, 0x40, 0x02,
++0x80, 0x18, 0x74, 0x84, 0x25, 0x0F, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE0, 0xC3, 0x9E,
++0x50, 0x08, 0x90, 0x8A, 0xE8, 0xE0, 0xA3, 0xF0, 0x80, 0x08, 0x90, 0x8A, 0xE7, 0xE0, 0x90, 0x8A,
++0xE9, 0xF0, 0x90, 0x8A, 0xE9, 0xE0, 0xFD, 0xAF, 0x0F, 0x91, 0x4E, 0x90, 0x8A, 0xE9, 0xE0, 0xFF,
++0x74, 0x84, 0x25, 0x0F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEF, 0xF0, 0x90, 0x8A, 0xE7,
++0xE0, 0xFF, 0xD3, 0x94, 0x13, 0x40, 0x07, 0x90, 0x87, 0x22, 0x74, 0x03, 0xF0, 0x22, 0xEF, 0xD3,
++0x94, 0x0B, 0x40, 0x07, 0x90, 0x87, 0x22, 0x74, 0x02, 0xF0, 0x22, 0xEF, 0xD3, 0x94, 0x03, 0x40,
++0x07, 0x90, 0x87, 0x22, 0x74, 0x01, 0xF0, 0x22, 0xE4, 0x90, 0x87, 0x22, 0xF0, 0x22, 0xD3, 0x10,
++0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x74, 0x84, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xED,
++0xF0, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xAC, 0x07, 0xED, 0x54, 0x1F, 0x90, 0x8A, 0xC7, 0xF0, 0x74,
++0x01, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0x90, 0x8A, 0xC5, 0xF0, 0x90, 0x8A,
++0xC8, 0x74, 0x01, 0xF0, 0xEB, 0xC3, 0x94, 0x01, 0x40, 0x02, 0x80, 0x37, 0x90, 0x8A, 0xC5, 0xE0,
++0x25, 0x0D, 0xFF, 0xA3, 0xF0, 0xA3, 0xE0, 0x90, 0x41, 0x9E, 0x93, 0xFE, 0xEF, 0xD3, 0x9E, 0x40,
++0x10, 0x74, 0x01, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE4, 0xF0, 0xAF, 0x04, 0x80,
++0x9D, 0x90, 0x8A, 0xC6, 0xE0, 0xFF, 0x74, 0x01, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83,
++0xEF, 0xF0, 0x22, 0xAD, 0x07, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x27, 0x12, 0x43, 0x5F, 0xE0,
++0xFF, 0x90, 0x8A, 0xCA, 0xF0, 0x74, 0xA5, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0,
++0x54, 0x1F, 0x90, 0x8A, 0xC9, 0xF0, 0xD3, 0x9F, 0x40, 0x06, 0xA3, 0xE0, 0x90, 0x8A, 0xC9, 0xF0,
++0x90, 0x8A, 0xC9, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0x66, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83,
++0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xEF, 0x25, 0xE0, 0x24, 0x2E, 0xF5, 0x82, 0xE4, 0x34,
++0x41, 0xF5, 0x83, 0x74, 0x01, 0x93, 0x2B, 0xFF, 0xE4, 0x93, 0x3A, 0xC3, 0x13, 0xFE, 0xEF, 0x13,
++0xFF, 0xED, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xEE, 0xF0, 0xA3,
++0xEF, 0xF0, 0xAF, 0x05, 0x90, 0x8A, 0xC9, 0xE0, 0xFD, 0x91, 0x4E, 0x90, 0x8A, 0xC9, 0xE0, 0xFF,
++0x22, 0xAC, 0x07, 0x74, 0x84, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE0, 0x54, 0x7F,
++0x90, 0x8A, 0xDE, 0xF0, 0xE0, 0x54, 0x1F, 0xFF, 0x90, 0x8A, 0xE1, 0xF0, 0x75, 0xF0, 0x09, 0xEC,
++0x90, 0x87, 0x28, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xE3, 0xF0, 0x75, 0xF0, 0x09, 0xEC, 0x90,
++0x87, 0x27, 0x12, 0x43, 0x5F, 0xE0, 0xFE, 0x90, 0x8A, 0xE4, 0xF0, 0xEC, 0x25, 0xE0, 0x24, 0xE4,
++0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFB, 0xA3, 0xE0, 0x90, 0x8A, 0xE5, 0xCB, 0xF0,
++0xA3, 0xEB, 0xF0, 0xEC, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0,
++0xFB, 0xA3, 0xE0, 0x90, 0x8A, 0xE7, 0xCB, 0xF0, 0xA3, 0xEB, 0xF0, 0xEF, 0xD3, 0x9E, 0x40, 0x0C,
++0x90, 0x8A, 0xE4, 0xE0, 0x90, 0x8A, 0xE1, 0xF0, 0x90, 0x8A, 0xDE, 0xF0, 0xED, 0x70, 0x02, 0xC1,
++0x93, 0x90, 0x8A, 0xE2, 0xED, 0xF0, 0x90, 0x8A, 0xDE, 0xE0, 0x30, 0xE6, 0x0E, 0x90, 0x8A, 0xE1,
++0xE0, 0x90, 0x8A, 0xDE, 0xF0, 0x90, 0x8A, 0xE2, 0xE0, 0x14, 0xF0, 0x90, 0x8A, 0xE2, 0xE0, 0x70,
++0x02, 0xC1, 0x93, 0x90, 0x8A, 0xE1, 0xE0, 0xFF, 0xD3, 0x94, 0x00, 0x50, 0x02, 0xC1, 0x93, 0xE4,
++0x90, 0x8A, 0xE0, 0xF0, 0xEF, 0x14, 0x90, 0x8A, 0xDF, 0xF0, 0x90, 0x8A, 0xE3, 0xE0, 0xFD, 0x90,
++0x8A, 0xDF, 0xE0, 0xFF, 0xD3, 0x9D, 0x40, 0x6F, 0xEF, 0x94, 0x10, 0x40, 0x21, 0xEF, 0x24, 0xF0,
++0xFF, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8,
++0xF9, 0xFF, 0x90, 0x8A, 0xE7, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x70, 0x27, 0x90, 0x8A,
++0xDF, 0xE0, 0xFF, 0xC3, 0x94, 0x10, 0x50, 0x37, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80,
++0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0x90, 0x8A, 0xE5, 0xE0, 0x5E, 0xFE, 0xA3,
++0xE0, 0x5F, 0x4E, 0x60, 0x1A, 0x90, 0x8A, 0xDF, 0xE0, 0x90, 0x8A, 0xDE, 0xF0, 0x90, 0x8A, 0xE0,
++0xE0, 0x04, 0xF0, 0x90, 0x8A, 0xE2, 0xE0, 0xFF, 0x90, 0x8A, 0xE0, 0xE0, 0x6F, 0x60, 0x08, 0x90,
++0x8A, 0xDF, 0xE0, 0x14, 0xF0, 0x80, 0x83, 0x90, 0x8A, 0xE2, 0xE0, 0xFF, 0x90, 0x8A, 0xE0, 0xE0,
++0xC3, 0x9F, 0x50, 0x0F, 0x90, 0x8A, 0xDF, 0xE0, 0xB5, 0x05, 0x08, 0x90, 0x8A, 0xE3, 0xE0, 0x90,
++0x8A, 0xDE, 0xF0, 0x90, 0x8A, 0xDE, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0x66, 0xF5, 0x82, 0xE4, 0x34,
++0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xEF, 0x25, 0xE0, 0x24, 0x2E, 0xF5,
++0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0x74, 0x01, 0x93, 0x2B, 0xFF, 0xE4, 0x93, 0x3A, 0xC3, 0x13,
++0xFE, 0xEF, 0x13, 0xFF, 0xEC, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83,
++0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0xAF, 0x04, 0x90, 0x8A, 0xDE, 0xE0, 0xFD, 0x91, 0x4E, 0x90, 0x8A,
++0xDE, 0xE0, 0xFF, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x8B, 0x1A, 0x8A, 0x1B, 0x89,
++0x1C, 0x90, 0x8B, 0x3F, 0x12, 0x43, 0x8B, 0xAB, 0x1D, 0xAA, 0x1E, 0xA9, 0x1F, 0x90, 0x8B, 0x42,
++0x12, 0x43, 0x8B, 0xAF, 0x20, 0x15, 0x20, 0xEF, 0x60, 0x1E, 0x90, 0x8B, 0x42, 0xE4, 0x75, 0xF0,
++0x01, 0x12, 0x43, 0x74, 0x12, 0x24, 0x62, 0xFF, 0x90, 0x8B, 0x3F, 0xE4, 0x75, 0xF0, 0x01, 0x12,
++0x43, 0x74, 0xEF, 0x12, 0x42, 0x4D, 0x80, 0xDB, 0xAB, 0x1A, 0xAA, 0x1B, 0xA9, 0x1C, 0xD0, 0xD0,
++0x92, 0xAF, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8B, 0x45, 0x12, 0x43, 0x8B,
++0x90, 0x8B, 0x53, 0xE0, 0xFF, 0x04, 0xF0, 0x90, 0x00, 0x01, 0xEF, 0x12, 0x42, 0x5F, 0x7F, 0xAF,
++0x7E, 0x01, 0x12, 0x74, 0x3B, 0xEF, 0x60, 0x47, 0x90, 0x8B, 0x45, 0x12, 0x43, 0x6B, 0x8B, 0x1D,
++0x8A, 0x1E, 0x89, 0x1F, 0x75, 0x20, 0x02, 0x7B, 0x01, 0x7A, 0x01, 0x79, 0xA0, 0xD1, 0xE4, 0x90,
++0x8B, 0x48, 0x12, 0x43, 0x6B, 0x8B, 0x1D, 0x8A, 0x1E, 0x89, 0x1F, 0x90, 0x8B, 0x45, 0x12, 0x43,
++0x6B, 0x12, 0x24, 0x62, 0xFF, 0xC4, 0x54, 0x0F, 0xF5, 0x20, 0x7B, 0x01, 0x7A, 0x01, 0x79, 0xA2,
++0xD1, 0xE4, 0x90, 0x01, 0xAF, 0x74, 0xFF, 0xF0, 0x90, 0x01, 0xCB, 0xE0, 0x64, 0x80, 0xF0, 0xD0,
++0xD0, 0x92, 0xAF, 0x22, 0x90, 0x8A, 0xC5, 0xE0, 0x54, 0xF0, 0x44, 0x03, 0xF0, 0x54, 0x0F, 0x44,
++0x80, 0xF0, 0x7B, 0x00, 0x7A, 0x00, 0x79, 0x56, 0x90, 0x8B, 0x48, 0x12, 0x43, 0x8B, 0x0B, 0x7A,
++0x8A, 0x79, 0xC5, 0xE1, 0x33, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x01, 0xC4, 0x74,
++0xC5, 0xF0, 0x74, 0x5F, 0xA3, 0xF0, 0x90, 0x04, 0x1D, 0xE0, 0x60, 0x1A, 0x90, 0x05, 0x22, 0xE0,
++0x54, 0x90, 0x60, 0x07, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x40, 0xF0, 0x90, 0x01, 0xC7, 0xE0, 0x30,
++0xE1, 0xE4, 0x7F, 0x00, 0x80, 0x02, 0x7F, 0x01, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xD3, 0x10, 0xAF,
++0x01, 0xC3, 0xC0, 0xD0, 0xE4, 0xFB, 0xFA, 0xEF, 0x30, 0xE0, 0x02, 0x7B, 0x80, 0xEF, 0xC3, 0x13,
++0x90, 0xFD, 0x10, 0xF0, 0x90, 0x04, 0x25, 0xEF, 0xF0, 0xED, 0x60, 0x1E, 0xAF, 0x03, 0x74, 0x0F,
++0x2F, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x80, 0xF0, 0x74, 0x10, 0x2F, 0xF5,
++0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x80, 0xF0, 0xAF, 0x03, 0x74, 0x08, 0x2F, 0xF5,
++0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE4, 0xF0, 0x74, 0x09, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0xFC,
++0xF5, 0x83, 0xE0, 0x54, 0xF0, 0xF0, 0x74, 0x21, 0x2B, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83,
++0xE0, 0x54, 0xF7, 0xF0, 0xAE, 0x02, 0xAF, 0x03, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x12, 0x5F, 0xC5,
++0xBF, 0x01, 0x10, 0x90, 0x02, 0x09, 0xE0, 0xFF, 0x7D, 0x01, 0x12, 0x5F, 0xFD, 0x90, 0x04, 0x1F,
++0x74, 0x20, 0xF0, 0x22, 0x90, 0x01, 0x02, 0xE0, 0x54, 0x03, 0xFF, 0xE0, 0x54, 0x0C, 0x13, 0x13,
++0x54, 0x3F, 0xFE, 0xEF, 0x64, 0x01, 0x60, 0x04, 0xEF, 0xB4, 0x03, 0x0E, 0x90, 0x8A, 0xC5, 0x74,
++0x01, 0xF0, 0xA3, 0x74, 0x37, 0xF0, 0x79, 0x01, 0x80, 0x18, 0xEE, 0x64, 0x01, 0x60, 0x07, 0xAF,
++0x06, 0xEE, 0x64, 0x03, 0x70, 0x3B, 0x90, 0x8A, 0xC5, 0x74, 0x01, 0xF0, 0xA3, 0x74, 0x3D, 0xF0,
++0x79, 0x40, 0x90, 0x8A, 0xC5, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0xF5, 0x82, 0x8E, 0x83, 0xE0, 0x59,
++0x60, 0x08, 0xE9, 0xF0, 0xE4, 0x90, 0x8A, 0xF6, 0xF0, 0x22, 0x90, 0x8A, 0xF6, 0xE0, 0x04, 0xF0,
++0xE0, 0xC3, 0x94, 0x0A, 0x40, 0x0B, 0xE4, 0xF0, 0x90, 0x04, 0x19, 0xE0, 0x30, 0xE0, 0x02, 0x11,
++0x6D, 0x22, 0xC0, 0xE0, 0xC0, 0xF0, 0xC0, 0x83, 0xC0, 0x82, 0xC0, 0xD0, 0x75, 0xD0, 0x00, 0xC0,
++0x00, 0xC0, 0x01, 0xC0, 0x02, 0xC0, 0x03, 0xC0, 0x04, 0xC0, 0x05, 0xC0, 0x06, 0xC0, 0x07, 0x90,
++0x01, 0xC4, 0x74, 0xF2, 0xF0, 0x74, 0x60, 0xA3, 0xF0, 0x90, 0x01, 0x34, 0xE0, 0x55, 0x28, 0xF5,
++0x2C, 0xA3, 0xE0, 0x55, 0x29, 0xF5, 0x2D, 0xA3, 0xE0, 0x55, 0x2A, 0xF5, 0x2E, 0xA3, 0xE0, 0x55,
++0x2B, 0xF5, 0x2F, 0xE5, 0x2C, 0x20, 0xE0, 0x02, 0x41, 0x89, 0x90, 0x01, 0x34, 0x74, 0x01, 0xF0,
++0x85, 0xD1, 0x4D, 0x85, 0xD2, 0x4E, 0x85, 0xD3, 0x4F, 0x85, 0xD4, 0x50, 0x85, 0xD5, 0x51, 0x85,
++0xD6, 0x52, 0x85, 0xD7, 0x53, 0x85, 0xD9, 0x54, 0xE5, 0x54, 0x54, 0x40, 0xC3, 0x13, 0xFF, 0xE5,
++0x53, 0x54, 0x20, 0x6F, 0x70, 0x02, 0x41, 0x46, 0xE5, 0x54, 0x30, 0xE5, 0x02, 0x41, 0x46, 0xE5,
++0x52, 0x54, 0x1F, 0xF5, 0x08, 0xE5, 0x4D, 0x54, 0x3F, 0xF5, 0x09, 0xE5, 0x51, 0x54, 0x1F, 0xFF,
++0xE5, 0x08, 0x25, 0xE0, 0x24, 0xE3, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE4, 0x8F, 0xF0,
++0x12, 0x42, 0x81, 0xE5, 0x53, 0x54, 0x1F, 0xFF, 0xE5, 0x08, 0x25, 0xE0, 0x24, 0xC0, 0xF5, 0x82,
++0xE4, 0x34, 0x85, 0xF5, 0x83, 0xE4, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xE5, 0x09, 0xD3, 0x94, 0x04,
++0x40, 0x03, 0x75, 0x09, 0x04, 0x75, 0xF0, 0x0A, 0xE5, 0x08, 0x90, 0x84, 0x00, 0x12, 0x43, 0x5F,
++0x75, 0xF0, 0x02, 0xE5, 0x09, 0x12, 0x43, 0x5F, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0xE5, 0x53, 0x54,
++0x1F, 0x2F, 0xFF, 0xE4, 0x3E, 0xFE, 0x75, 0xF0, 0x0A, 0xE5, 0x08, 0x90, 0x84, 0x00, 0x12, 0x43,
++0x5F, 0x75, 0xF0, 0x02, 0xE5, 0x09, 0x12, 0x43, 0x5F, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0xE5, 0x54,
++0x20, 0xE6, 0x24, 0xE5, 0x53, 0x54, 0x1F, 0xFF, 0xE5, 0x08, 0x25, 0xE0, 0x24, 0x63, 0xF5, 0x82,
++0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE4, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xE5, 0x4F, 0x30, 0xE7, 0x36,
++0xAF, 0x08, 0x12, 0x5C, 0xC3, 0x80, 0x2F, 0xE5, 0x53, 0x54, 0x1F, 0xFF, 0xE5, 0x08, 0x25, 0xE0,
++0x24, 0xA3, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE4, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xE5,
++0x4F, 0x30, 0xE7, 0x12, 0xE5, 0x4F, 0x54, 0x7F, 0xFD, 0xE5, 0x53, 0x54, 0x1F, 0xF5, 0x0D, 0xAB,
++0x09, 0xAF, 0x08, 0x12, 0x5C, 0x66, 0xE5, 0x24, 0x14, 0x24, 0xFD, 0x50, 0x02, 0x80, 0x3A, 0x90,
++0x8B, 0x1A, 0xE0, 0x60, 0x2B, 0x90, 0x01, 0x5B, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x04, 0xF0,
++0x12, 0x4B, 0x34, 0xEF, 0x64, 0x01, 0x70, 0x21, 0x90, 0x8B, 0x3D, 0x12, 0x4B, 0x5C, 0x90, 0x01,
++0x5B, 0x74, 0x05, 0xF0, 0x90, 0x06, 0x92, 0x74, 0x01, 0xF0, 0x90, 0x8B, 0x18, 0xF0, 0x80, 0x09,
++0x12, 0x4B, 0x34, 0xBF, 0x01, 0x03, 0x12, 0x4A, 0xFC, 0xE5, 0x2C, 0x30, 0xE1, 0x21, 0x90, 0x01,
++0x34, 0x74, 0x02, 0xF0, 0x85, 0xD1, 0x56, 0x85, 0xD2, 0x57, 0x85, 0xD3, 0x58, 0x85, 0xD4, 0x59,
++0x85, 0xD5, 0x5A, 0x85, 0xD6, 0x5B, 0x85, 0xD7, 0x5C, 0x85, 0xD9, 0x5D, 0x12, 0x5F, 0xA4, 0xE5,
++0x2C, 0x30, 0xE3, 0x06, 0x90, 0x01, 0x34, 0x74, 0x08, 0xF0, 0xE5, 0x2C, 0x30, 0xE4, 0x09, 0x90,
++0x01, 0x34, 0x74, 0x10, 0xF0, 0x43, 0x55, 0x10, 0xE5, 0x2C, 0x30, 0xE5, 0x26, 0x90, 0x01, 0xCF,
++0xE0, 0x30, 0xE5, 0x1F, 0xE0, 0x54, 0xDF, 0xF0, 0x90, 0x01, 0x34, 0x74, 0x20, 0xF0, 0x75, 0xA8,
++0x00, 0x75, 0xE8, 0x00, 0x12, 0x51, 0x9D, 0x90, 0x00, 0x03, 0xE0, 0x54, 0xFB, 0xF0, 0x12, 0x52,
++0x0E, 0x80, 0xFE, 0xE5, 0x2C, 0x30, 0xE6, 0x2D, 0x90, 0x01, 0x34, 0x74, 0x40, 0xF0, 0x90, 0x8B,
++0x32, 0xE0, 0x30, 0xE0, 0x0C, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x05, 0x90, 0x8B, 0x34, 0xE4,
++0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0xFF, 0x30, 0xE0, 0x0C, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x05,
++0x90, 0x8B, 0x2E, 0xE4, 0xF0, 0xE5, 0x2E, 0x20, 0xE0, 0x02, 0x61, 0xE6, 0x90, 0x8B, 0x08, 0x74,
++0x01, 0xF0, 0x90, 0x01, 0x36, 0xF0, 0x90, 0x8B, 0x06, 0xE0, 0x60, 0x0F, 0xE4, 0xF0, 0x90, 0x05,
++0x53, 0xE0, 0x44, 0x02, 0xF0, 0x90, 0x05, 0xFC, 0xE0, 0x04, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0x30,
++0xE0, 0x2F, 0x90, 0x8B, 0x37, 0x74, 0x01, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0xFF, 0x13, 0x13, 0x54,
++0x3F, 0x30, 0xE0, 0x1D, 0x90, 0x8B, 0x34, 0x74, 0x01, 0xF0, 0xB1, 0x39, 0x90, 0x8B, 0x33, 0xE0,
++0x64, 0x03, 0x60, 0x0D, 0x7F, 0x01, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x05, 0x7F, 0x04, 0x12, 0x4E,
++0x89, 0x90, 0x8B, 0x2C, 0xE0, 0xFF, 0x30, 0xE0, 0x55, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x4E,
++0x90, 0x8B, 0x2E, 0x74, 0x01, 0xF0, 0xB1, 0x39, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x3E,
++0xB1, 0x5F, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x90, 0x8B, 0x2D, 0xE0, 0xFF, 0x64, 0x06, 0x60,
++0x2D, 0xEF, 0xB4, 0x04, 0x02, 0x80, 0x07, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x04, 0xE4, 0xFF,
++0x80, 0x14, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x03, 0x04, 0x7F, 0x01, 0x80, 0x09, 0x90, 0x8B, 0x2D,
++0xE0, 0xB4, 0x02, 0x04, 0x7F, 0x01, 0xB1, 0x82, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x12, 0x43,
++0xE7, 0x90, 0x8B, 0x08, 0xE4, 0xF0, 0xE5, 0x2E, 0x30, 0xE1, 0x2F, 0x90, 0x01, 0x36, 0x74, 0x02,
++0xF0, 0x43, 0x55, 0x40, 0x11, 0x84, 0x90, 0x8B, 0x37, 0xE0, 0xB4, 0x01, 0x09, 0x90, 0x05, 0x22,
++0xE4, 0xF0, 0x90, 0x8B, 0x37, 0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x0D, 0xE4, 0xFF, 0x12,
++0x4D, 0xE0, 0xEF, 0x60, 0x05, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0xE5, 0x2E, 0x30, 0xE2, 0x16, 0x90,
++0x01, 0x36, 0x74, 0x04, 0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x06, 0xA3, 0xE0, 0x64, 0x06,
++0x60, 0x03, 0x12, 0x46, 0xB3, 0xE5, 0x2E, 0x30, 0xE3, 0x38, 0x90, 0x01, 0x36, 0x74, 0x08, 0xF0,
++0xE5, 0x21, 0x64, 0x01, 0x70, 0x2C, 0xE5, 0x24, 0x60, 0x28, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90,
++0x01, 0x3C, 0x74, 0x02, 0xF0, 0x90, 0x8B, 0x3D, 0xE4, 0xF0, 0x90, 0x8B, 0x11, 0xE0, 0x90, 0x8B,
++0x3E, 0xF0, 0xE4, 0xFB, 0xFD, 0x7F, 0x54, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x57, 0x74,
++0x05, 0xF0, 0xE5, 0x2E, 0x30, 0xE4, 0x2B, 0x90, 0x01, 0x36, 0x74, 0x10, 0xF0, 0xE5, 0x21, 0xB4,
++0x01, 0x20, 0xE5, 0x24, 0x60, 0x1C, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x02,
++0xF0, 0x90, 0x8B, 0x1B, 0xE4, 0xF0, 0x53, 0x25, 0xFD, 0xE5, 0x25, 0x54, 0x07, 0x70, 0x03, 0x12,
++0x4A, 0xFC, 0xE5, 0x2E, 0x30, 0xE5, 0x1F, 0x90, 0x01, 0x36, 0x74, 0x20, 0xF0, 0xE5, 0x21, 0xB4,
++0x01, 0x14, 0xE5, 0x24, 0x60, 0x10, 0x90, 0x8B, 0x1A, 0xE0, 0x64, 0x02, 0x60, 0x05, 0x12, 0x4A,
++0x97, 0x80, 0x03, 0x12, 0x49, 0x49, 0xE5, 0x2E, 0x30, 0xE6, 0x1B, 0x90, 0x01, 0x36, 0x74, 0x40,
++0xF0, 0xE5, 0x21, 0xB4, 0x01, 0x10, 0xE5, 0x24, 0x60, 0x0C, 0x53, 0x25, 0xFE, 0xE5, 0x25, 0x54,
++0x07, 0x70, 0x03, 0x12, 0x4A, 0xFC, 0xE5, 0x2F, 0x30, 0xE1, 0x28, 0x90, 0x01, 0x37, 0x74, 0x02,
++0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x18, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x08,
++0x12, 0x48, 0xFE, 0x12, 0x7D, 0xC1, 0x80, 0x0B, 0x90, 0x8B, 0x31, 0x74, 0x01, 0xF0, 0x80, 0x03,
++0x12, 0x48, 0xFE, 0x74, 0xF2, 0x04, 0x90, 0x01, 0xC4, 0xF0, 0x74, 0x60, 0xA3, 0xF0, 0xD0, 0x07,
++0xD0, 0x06, 0xD0, 0x05, 0xD0, 0x04, 0xD0, 0x03, 0xD0, 0x02, 0xD0, 0x01, 0xD0, 0x00, 0xD0, 0xD0,
++0xD0, 0x82, 0xD0, 0x83, 0xD0, 0xF0, 0xD0, 0xE0, 0x32, 0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x05,
++0x58, 0xE0, 0xFF, 0x90, 0x8B, 0x38, 0xE0, 0x2F, 0x24, 0xFE, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB,
++0xFD, 0x7F, 0x50, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x53, 0x74, 0x05, 0xF0, 0x22, 0x90,
++0x8B, 0x2C, 0xE0, 0xFF, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x30, 0xE0, 0x0A, 0xA3, 0xE0, 0x64, 0x06,
++0x60, 0x04, 0x7F, 0x06, 0xB1, 0x82, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x06, 0x60, 0x03, 0x12, 0x78,
++0x35, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0x6F, 0x70,
++0x02, 0xE1, 0x4E, 0xEF, 0x12, 0x43, 0x94, 0x65, 0xB0, 0x00, 0x65, 0xEA, 0x01, 0x66, 0x30, 0x02,
++0x66, 0x6A, 0x03, 0x66, 0xA2, 0x04, 0x66, 0xDB, 0x05, 0x67, 0x16, 0x06, 0x00, 0x00, 0x67, 0x4E,
++0xEE, 0xB4, 0x04, 0x06, 0x7F, 0x01, 0xF1, 0x81, 0xE1, 0x4E, 0x90, 0x8B, 0x2D, 0xE0, 0xFF, 0xB4,
++0x05, 0x04, 0xF1, 0x5D, 0xE1, 0x4E, 0xEF, 0xB4, 0x06, 0x06, 0x7F, 0x01, 0xF1, 0x72, 0x80, 0x16,
++0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x03, 0x06, 0x7F, 0x01, 0xF1, 0x53, 0x80, 0x09, 0x90, 0x8B, 0x2D,
++0xE0, 0xB4, 0x02, 0x02, 0xF1, 0x67, 0xF1, 0xA4, 0xE1, 0x4E, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04,
++0x06, 0x7F, 0x01, 0xF1, 0x81, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x02, 0xF1, 0x5D,
++0x90, 0x8B, 0x2D, 0xE0, 0x70, 0x04, 0xF1, 0x9A, 0xE1, 0x4E, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0xB4,
++0x06, 0x06, 0x7F, 0x01, 0xF1, 0x72, 0xE1, 0x4E, 0xEE, 0xB4, 0x03, 0x06, 0x7F, 0x01, 0xF1, 0x53,
++0xE1, 0x4E, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x02, 0x60, 0x02, 0xE1, 0x4E, 0xF1, 0x67, 0xE1, 0x4E,
++0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04, 0x06, 0x7F, 0x01, 0xF1, 0x81, 0x80, 0x09, 0x90, 0x8B, 0x2D,
++0xE0, 0xB4, 0x05, 0x02, 0xF1, 0x5D, 0x90, 0x8B, 0x2D, 0xE0, 0x70, 0x04, 0xF1, 0x9A, 0x80, 0x16,
++0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0xB4, 0x06, 0x06, 0x7F, 0x01, 0xF1, 0x72, 0x80, 0x08, 0xEE, 0xB4,
++0x03, 0x04, 0x7F, 0x01, 0xF1, 0x53, 0xF1, 0xD0, 0xE1, 0x4E, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04,
++0x06, 0x7F, 0x01, 0xF1, 0x81, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x02, 0xF1, 0x5D,
++0x90, 0x8B, 0x2D, 0xE0, 0x70, 0x04, 0xF1, 0x9A, 0x80, 0x14, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0xB4,
++0x06, 0x06, 0xE4, 0xFF, 0xF1, 0x72, 0x80, 0x06, 0xEE, 0xB4, 0x02, 0x02, 0xF1, 0x67, 0xF1, 0xB9,
++0xE1, 0x4E, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0xB4, 0x06, 0x06, 0xE4, 0xFF, 0xF1, 0x72, 0x80, 0x13,
++0xEE, 0xB4, 0x03, 0x06, 0x7F, 0x01, 0xF1, 0x53, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02,
++0x02, 0xF1, 0x67, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x01, 0x04, 0xF1, 0xA4, 0x80, 0x09, 0x90, 0x8B,
++0x2D, 0xE0, 0xB4, 0x05, 0x02, 0xF1, 0x5D, 0xF1, 0xAF, 0x80, 0x73, 0x90, 0x8B, 0x2D, 0xE0, 0xFE,
++0xB4, 0x06, 0x06, 0xE4, 0xFF, 0xF1, 0x72, 0x80, 0x13, 0xEE, 0xB4, 0x03, 0x06, 0x7F, 0x01, 0xF1,
++0x53, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02, 0x02, 0xF1, 0x67, 0x90, 0x8B, 0x2D, 0xE0,
++0xB4, 0x01, 0x04, 0xF1, 0xA4, 0x80, 0x0B, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04, 0x04, 0x7F, 0x01,
++0xF1, 0x81, 0xF1, 0xC3, 0x80, 0x38, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04, 0x06, 0x7F, 0x01, 0xF1,
++0x81, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x02, 0xF1, 0x5D, 0x90, 0x8B, 0x2D, 0xE0,
++0x70, 0x04, 0xF1, 0x9A, 0x80, 0x16, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x03, 0x06, 0xE4, 0xFF, 0xF1,
++0x53, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02, 0x02, 0xF1, 0x67, 0xF1, 0xDD, 0xD0, 0xD0,
++0x92, 0xAF, 0x22, 0x12, 0x4A, 0xB2, 0x90, 0x8B, 0x2D, 0x74, 0x01, 0xF0, 0x22, 0x90, 0x05, 0x22,
++0xE4, 0xF0, 0x90, 0x8B, 0x2D, 0xF0, 0x22, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x2D, 0x04,
++0xF0, 0x22, 0xEF, 0x60, 0x05, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x2D, 0x74, 0x01, 0xF0,
++0x22, 0x90, 0x8B, 0x56, 0xEF, 0xF0, 0x12, 0x7D, 0x42, 0x90, 0x8B, 0x56, 0xE0, 0x60, 0x05, 0x90,
++0x05, 0x22, 0xE4, 0xF0, 0xE4, 0x90, 0x8B, 0x2D, 0xF0, 0x22, 0x12, 0x4A, 0xCC, 0x90, 0x8B, 0x2D,
++0x74, 0x01, 0xF0, 0x22, 0x7F, 0x01, 0x12, 0x4A, 0x7C, 0xE4, 0x90, 0x8B, 0x2D, 0xF0, 0x22, 0x12,
++0x7C, 0x4A, 0x90, 0x8B, 0x2D, 0x74, 0x04, 0xF0, 0x22, 0x12, 0x4A, 0x32, 0x90, 0x8B, 0x2D, 0x74,
++0x03, 0xF0, 0x22, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x90, 0x8B, 0x2D, 0x74, 0x05, 0xF0, 0x22,
++0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x90, 0x8B, 0x2D, 0x74, 0x02, 0xF0, 0x22, 0x90, 0x05, 0x22,
++0x74, 0x6F, 0xF0, 0x90, 0x8B, 0x2D, 0x74, 0x06, 0xF0, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0,
++0xD0, 0xE4, 0xFD, 0xFC, 0xEF, 0x30, 0xE0, 0x02, 0x7D, 0x80, 0xEF, 0xC3, 0x13, 0x90, 0xFD, 0x10,
++0xF0, 0xAE, 0x04, 0xAF, 0x05, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x75, 0x28, 0x33, 0xE4, 0xF5, 0x29,
++0x75, 0x2A, 0x07, 0xF5, 0x2B, 0x90, 0x01, 0x30, 0xE5, 0x28, 0xF0, 0xA3, 0xE5, 0x29, 0xF0, 0xA3,
++0xE5, 0x2A, 0xF0, 0xA3, 0xE5, 0x2B, 0xF0, 0x22, 0x75, 0x30, 0x1F, 0x75, 0x31, 0x01, 0x43, 0x31,
++0x10, 0xE4, 0xF5, 0x32, 0x90, 0x01, 0x38, 0xE5, 0x30, 0xF0, 0xA3, 0xE5, 0x31, 0xF0, 0xA3, 0xE5,
++0x32, 0xF0, 0x22, 0x22, 0x90, 0x00, 0x02, 0xE0, 0x54, 0xE0, 0x7F, 0x01, 0x60, 0x02, 0x7F, 0x00,
++0x22, 0x90, 0x00, 0xF3, 0xE0, 0x7F, 0x00, 0x30, 0xE3, 0x02, 0x7F, 0x01, 0x22, 0x90, 0x8B, 0x09,
++0xE0, 0xB4, 0x01, 0x0C, 0x90, 0x00, 0xF2, 0xE0, 0x30, 0xE7, 0x05, 0x7E, 0xFD, 0x7F, 0x33, 0x22,
++0x7E, 0xFD, 0x7F, 0x2F, 0x22, 0x90, 0x00, 0xF3, 0xE0, 0x30, 0xE2, 0x0D, 0x90, 0x05, 0x41, 0x74,
++0x10, 0xF0, 0x90, 0x05, 0x5A, 0xF0, 0xA3, 0xE4, 0xF0, 0x22, 0x90, 0x01, 0x64, 0x74, 0xA0, 0xF0,
++0x22, 0xC0, 0xE0, 0xC0, 0x83, 0xC0, 0x82, 0xC0, 0xD0, 0x75, 0xD0, 0x00, 0xC0, 0x05, 0xC0, 0x06,
++0xC0, 0x07, 0x7D, 0x91, 0x90, 0x01, 0xC4, 0xED, 0xF0, 0x74, 0x68, 0xFF, 0xA3, 0xF0, 0x53, 0x91,
++0xEF, 0x90, 0x00, 0x51, 0xE0, 0xFE, 0x90, 0x00, 0x55, 0xE0, 0x5E, 0xF5, 0x3D, 0x90, 0x00, 0x52,
++0xE0, 0xFE, 0x90, 0x00, 0x56, 0xE0, 0x5E, 0xF5, 0x3E, 0xE5, 0x3D, 0x30, 0xE4, 0x06, 0x90, 0x00,
++0x55, 0x74, 0x10, 0xF0, 0xE5, 0x3D, 0x30, 0xE5, 0x06, 0x90, 0x00, 0x55, 0x74, 0x20, 0xF0, 0xE5,
++0x3D, 0x30, 0xE6, 0x06, 0x90, 0x00, 0x55, 0x74, 0x40, 0xF0, 0xE5, 0x3D, 0x30, 0xE7, 0x06, 0x90,
++0x00, 0x55, 0x74, 0x80, 0xF0, 0xE5, 0x3E, 0x30, 0xE0, 0x06, 0x90, 0x00, 0x56, 0x74, 0x01, 0xF0,
++0xE5, 0x3E, 0x30, 0xE1, 0x06, 0x90, 0x00, 0x56, 0x74, 0x02, 0xF0, 0xE5, 0x3E, 0x30, 0xE2, 0x06,
++0x90, 0x00, 0x56, 0x74, 0x04, 0xF0, 0xE5, 0x3E, 0x30, 0xE3, 0x06, 0x90, 0x00, 0x56, 0x74, 0x08,
++0xF0, 0x90, 0x01, 0xC4, 0xED, 0xF0, 0xA3, 0xEF, 0xF0, 0xD0, 0x07, 0xD0, 0x06, 0xD0, 0x05, 0xD0,
++0xD0, 0xD0, 0x82, 0xD0, 0x83, 0xD0, 0xE0, 0x32, 0xEF, 0xC3, 0x94, 0x20, 0x50, 0x39, 0xEF, 0x30,
++0xE0, 0x17, 0xED, 0xC4, 0x54, 0xF0, 0xFD, 0xEF, 0xC3, 0x13, 0xFE, 0x24, 0xA4, 0xF5, 0x82, 0xE4,
++0x34, 0x04, 0xF5, 0x83, 0xE0, 0x54, 0x0F, 0x80, 0x10, 0xEF, 0xC3, 0x13, 0xFE, 0x24, 0xA4, 0xF5,
++0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE0, 0x54, 0xF0, 0xF0, 0x74, 0xA4, 0x2E, 0xF5, 0x82, 0xE4,
++0x34, 0x04, 0xF5, 0x83, 0xE0, 0x4D, 0xF0, 0x22, 0xAD, 0x07, 0x74, 0x84, 0x2D, 0xF5, 0x82, 0xE4,
++0x34, 0x04, 0xF5, 0x83, 0xE0, 0x54, 0x7F, 0x90, 0x8A, 0xDE, 0xF0, 0xE0, 0xF9, 0x54, 0x1F, 0xA3,
++0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x27, 0x12, 0x43, 0x5F, 0xE0, 0xFF, 0x90, 0x8A, 0xE1,
++0xF0, 0xED, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0xFB, 0xA3,
++0xE0, 0x90, 0x8A, 0xE2, 0xCB, 0xF0, 0xA3, 0xEB, 0xF0, 0xED, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82,
++0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFB, 0xA3, 0xE0, 0x90, 0x8A, 0xE4, 0xCB, 0xF0, 0xA3, 0xEB,
++0xF0, 0x90, 0x8A, 0xDF, 0xE0, 0xFE, 0x25, 0xE0, 0x24, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5,
++0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xED, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4,
++0x34, 0x86, 0xF5, 0x83, 0xEA, 0xF0, 0xA3, 0xEB, 0xF0, 0xEE, 0xC3, 0x9F, 0x40, 0x02, 0x41, 0xB9,
++0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74, 0xA5, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEF,
++0xF0, 0xEF, 0x04, 0x90, 0x8A, 0xE0, 0xF0, 0x90, 0x8A, 0xE1, 0xE0, 0xFF, 0x90, 0x8A, 0xE0, 0xE0,
++0xFE, 0xD3, 0x9F, 0x40, 0x02, 0x41, 0xF3, 0xEE, 0xC3, 0x94, 0x10, 0x40, 0x21, 0xEE, 0x24, 0xF0,
++0xFF, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8,
++0xF9, 0xFF, 0x90, 0x8A, 0xE2, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x70, 0x27, 0x90, 0x8A,
++0xE0, 0xE0, 0xFF, 0xC3, 0x94, 0x10, 0x50, 0x59, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80,
++0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0x90, 0x8A, 0xE4, 0xE0, 0x5E, 0xFE, 0xA3,
++0xE0, 0x5F, 0x4E, 0x60, 0x3C, 0x90, 0x8A, 0xE0, 0xE0, 0xB4, 0x11, 0x0D, 0x90, 0x8A, 0xE3, 0xE0,
++0x30, 0xE7, 0x06, 0x90, 0x8A, 0xE0, 0x74, 0x17, 0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0xFF, 0x64, 0x13,
++0x60, 0x04, 0xEF, 0xB4, 0x12, 0x0D, 0x90, 0x8A, 0xE2, 0xE0, 0x30, 0xE0, 0x06, 0x90, 0x8A, 0xE0,
++0x74, 0x18, 0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0x90, 0x8A, 0xDF, 0xF0, 0x90, 0x8A, 0xDE, 0xF0, 0x80,
++0x42, 0x90, 0x8A, 0xE0, 0xE0, 0x04, 0xF0, 0x41, 0x17, 0x90, 0x8A, 0xE1, 0xE0, 0xFC, 0x90, 0x8A,
++0xDF, 0xE0, 0xFF, 0x6C, 0x70, 0x71, 0x74, 0xA5, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83,
++0xEF, 0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x29, 0x12, 0x43, 0x5F, 0xE0, 0xB4, 0x01, 0x10,
++0xE9, 0x20, 0xE6, 0x0C, 0x90, 0x8A, 0xDF, 0xE0, 0x44, 0x40, 0x90, 0x8A, 0xDE, 0xF0, 0x80, 0x03,
++0xAF, 0x01, 0x22, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0x66, 0xF5, 0x82, 0xE4, 0x34,
++0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xEF, 0x25, 0xE0, 0x24, 0x2E, 0xF5,
++0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0x74, 0x01, 0x93, 0x2B, 0xFF, 0xE4, 0x93, 0x3A, 0xC3, 0x13,
++0xFE, 0xEF, 0x13, 0xFF, 0xED, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83,
++0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0x80, 0x66, 0x90, 0x8A, 0xDF, 0xE0, 0xD3, 0x9C, 0x40, 0x5E, 0x90,
++0x8A, 0xE1, 0xE0, 0xFF, 0x74, 0xA5, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEF, 0xF0,
++0x90, 0x8A, 0xDF, 0xEF, 0xF0, 0x90, 0x8A, 0xDE, 0xF0, 0xFC, 0xA3, 0xE0, 0xFF, 0x25, 0xE0, 0x24,
++0x66, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xEF,
++0x25, 0xE0, 0x24, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0x74, 0x01, 0x93, 0x2B, 0xFF,
++0xE4, 0x93, 0x3A, 0xC3, 0x13, 0xFE, 0xEF, 0x13, 0xFF, 0xED, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82,
++0xE4, 0x34, 0x86, 0xF5, 0x83, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0xAF, 0x04, 0x22, 0x74, 0x01, 0x2D,
++0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE4, 0xF0, 0xAF, 0x05, 0x90, 0x8A, 0xDE, 0xE0, 0x44,
++0x80, 0xFD, 0x12, 0x5C, 0x4E, 0x90, 0x8A, 0xDE, 0xE0, 0x44, 0x80, 0xFF, 0x22, 0xE4, 0x90, 0x8A,
++0xCF, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0xC3, 0x94, 0x20, 0x40, 0x03, 0x02, 0x72, 0x54, 0x75,
++0xF0, 0x09, 0xEF, 0x90, 0x87, 0x2A, 0x12, 0x43, 0x5F, 0xE0, 0x64, 0x01, 0x60, 0x03, 0x02, 0x72,
++0x4B, 0x90, 0x8A, 0xCF, 0xE0, 0x25, 0xE0, 0x24, 0xC0, 0xF5, 0x82, 0xE4, 0x34, 0x85, 0xF5, 0x83,
++0xE0, 0xFC, 0xA3, 0xE0, 0xD3, 0x94, 0x00, 0xEC, 0x94, 0x00, 0x50, 0x03, 0x02, 0x72, 0x4B, 0xEF,
++0x75, 0xF0, 0x0A, 0xA4, 0x24, 0x00, 0xF9, 0x74, 0x84, 0x35, 0xF0, 0x75, 0x12, 0x01, 0xF5, 0x13,
++0x89, 0x14, 0x90, 0x8A, 0xCF, 0xE0, 0x25, 0xE0, 0x24, 0xC0, 0xF5, 0x82, 0xE4, 0x34, 0x85, 0xF5,
++0x83, 0xE0, 0xFD, 0xA3, 0xE0, 0x90, 0x8A, 0xD4, 0xCD, 0xF0, 0xA3, 0xED, 0xF0, 0xEF, 0x25, 0xE0,
++0x24, 0x63, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE0, 0xFF, 0xA3, 0xE0, 0x90, 0x8A, 0xD6,
++0xCF, 0xF0, 0xA3, 0xEF, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFE, 0x24, 0x84, 0xF5, 0x82, 0xE4, 0x34,
++0x04, 0xF5, 0x83, 0xE0, 0x54, 0x3F, 0x90, 0x8A, 0xD0, 0xF0, 0xE0, 0xFD, 0x54, 0x1F, 0xA3, 0xF0,
++0x75, 0xF0, 0x09, 0xEE, 0x90, 0x87, 0x27, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD9, 0xF0, 0x90,
++0x8A, 0xCF, 0xE0, 0xFB, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, 0xC3, 0x94,
++0x05, 0x40, 0x02, 0xC1, 0x9C, 0x90, 0x8A, 0xD9, 0xE0, 0xFE, 0x90, 0x8A, 0xD1, 0xE0, 0x9E, 0x40,
++0x13, 0x90, 0x8A, 0xD9, 0xE0, 0x90, 0x8A, 0xD1, 0xF0, 0xED, 0x54, 0x40, 0xFD, 0x90, 0x8A, 0xD0,
++0xF0, 0xEE, 0x4D, 0xF0, 0x90, 0x8A, 0xD1, 0xE0, 0xFF, 0x90, 0x41, 0x12, 0x93, 0xFE, 0x74, 0x23,
++0x2B, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xC3, 0x9E, 0x40, 0x06, 0xEF, 0x90, 0x40,
++0xDA, 0x80, 0x07, 0x90, 0x8A, 0xD1, 0xE0, 0x90, 0x40, 0xF6, 0x93, 0x90, 0x8A, 0xD8, 0xF0, 0x90,
++0x8A, 0xD8, 0xE0, 0x75, 0xF0, 0x06, 0xA4, 0x24, 0x50, 0xF9, 0x74, 0x40, 0x35, 0xF0, 0x75, 0x0F,
++0xFF, 0xF5, 0x10, 0x89, 0x11, 0x90, 0x8A, 0xD0, 0xE0, 0x90, 0x41, 0xBA, 0x93, 0xFF, 0xD3, 0x90,
++0x8A, 0xD7, 0xE0, 0x9F, 0x90, 0x8A, 0xD6, 0xE0, 0x94, 0x00, 0x40, 0x0D, 0x90, 0x8A, 0xCF, 0xE0,
++0xFF, 0xE4, 0xFD, 0x12, 0x5D, 0x41, 0x02, 0x71, 0xE1, 0x90, 0x8A, 0xCF, 0xE0, 0x25, 0xE0, 0x24,
++0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0xFF, 0xA3, 0xE0, 0x90, 0x8A, 0xD2, 0xCF,
++0xF0, 0xA3, 0xEF, 0xF0, 0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x12, 0x24, 0x62, 0xFF, 0x7E, 0x00,
++0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x12, 0x42, 0x97, 0xFD, 0xAC, 0xF0, 0x12, 0x24, 0x7B, 0x90,
++0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x90, 0x00,
++0x01, 0x12, 0x42, 0x20, 0xFF, 0x7E, 0x00, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x02,
++0x12, 0x42, 0xC2, 0xFD, 0xAC, 0xF0, 0x12, 0x24, 0x7B, 0x90, 0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12,
++0x42, 0x81, 0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFF, 0x7E,
++0x00, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x04, 0x12, 0x42, 0xC2, 0xFD, 0xAC, 0xF0,
++0x12, 0x24, 0x7B, 0x90, 0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xAB, 0x0F, 0xAA, 0x10,
++0xA9, 0x11, 0x90, 0x00, 0x03, 0x12, 0x42, 0x20, 0xFF, 0x7E, 0x00, 0xAB, 0x12, 0xAA, 0x13, 0xA9,
++0x14, 0x90, 0x00, 0x06, 0x12, 0x42, 0xC2, 0xFD, 0xAC, 0xF0, 0x12, 0x24, 0x7B, 0x90, 0x8A, 0xD2,
++0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x90, 0x00, 0x04, 0x12,
++0x42, 0x20, 0xFF, 0x7E, 0x00, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x08, 0x12, 0x42,
++0xC2, 0xFD, 0xAC, 0xF0, 0x12, 0x24, 0x7B, 0x90, 0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81,
++0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x90, 0x00, 0x05, 0x12, 0x42, 0x20, 0xFF, 0x7E, 0x00, 0x90,
++0x8A, 0xD4, 0xE0, 0xFC, 0xA3, 0xE0, 0xFD, 0x12, 0x24, 0x7B, 0xD3, 0x90, 0x8A, 0xD3, 0xE0, 0x9F,
++0x90, 0x8A, 0xD2, 0xE0, 0x9E, 0x40, 0x0C, 0xA3, 0xE0, 0x9F, 0xF0, 0x90, 0x8A, 0xD2, 0xE0, 0x9E,
++0xF0, 0x80, 0x07, 0xE4, 0x90, 0x8A, 0xD2, 0xF0, 0xA3, 0xF0, 0x90, 0x8A, 0xD2, 0xE0, 0xFC, 0xA3,
++0xE0, 0xFD, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86,
++0xF5, 0x83, 0xEC, 0xF0, 0xA3, 0xED, 0xF0, 0x90, 0x8A, 0xD0, 0xE0, 0x25, 0xE0, 0x24, 0x2E, 0xF5,
++0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xD3, 0xED, 0x9B,
++0xEC, 0x9A, 0x40, 0x05, 0x31, 0x78, 0x02, 0x71, 0xAF, 0x90, 0x8A, 0xD0, 0xE0, 0x25, 0xE0, 0x24,
++0x66, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFE, 0x74, 0x01, 0x93, 0xFF, 0xC3,
++0x90, 0x8A, 0xD3, 0xE0, 0x9F, 0x90, 0x8A, 0xD2, 0xE0, 0x9E, 0x40, 0x03, 0x02, 0x71, 0xAF, 0x90,
++0x8A, 0xCF, 0xE0, 0xFF, 0x7D, 0x01, 0x12, 0x5D, 0x41, 0x02, 0x71, 0xAF, 0x90, 0x8A, 0xCF, 0xE0,
++0xFF, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, 0xFC, 0x64, 0x05, 0x60, 0x03,
++0x02, 0x70, 0x7D, 0x90, 0x87, 0x22, 0xE0, 0xFE, 0xB4, 0x03, 0x0B, 0x90, 0x8A, 0xD1, 0xE0, 0xC3,
++0x94, 0x19, 0x40, 0x3D, 0x80, 0x2E, 0xEE, 0xB4, 0x02, 0x0B, 0x90, 0x8A, 0xD1, 0xE0, 0xC3, 0x94,
++0x11, 0x40, 0x2E, 0x80, 0x1F, 0x90, 0x87, 0x22, 0xE0, 0xFE, 0xB4, 0x01, 0x0B, 0x90, 0x8A, 0xD1,
++0xE0, 0xC3, 0x94, 0x0A, 0x40, 0x1B, 0x80, 0x0C, 0xEE, 0x70, 0x11, 0x90, 0x8A, 0xD1, 0xE0, 0xC3,
++0x94, 0x03, 0x40, 0x0D, 0x90, 0x89, 0x43, 0x74, 0x01, 0xF0, 0x80, 0x05, 0xE4, 0x90, 0x89, 0x43,
++0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFE, 0x24, 0x43, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE0,
++0x90, 0x8A, 0xDD, 0xF0, 0x74, 0x23, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFE,
++0xC3, 0x94, 0x30, 0x50, 0x0B, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0x74, 0x64, 0x2F, 0x02, 0x70, 0x28,
++0x90, 0x89, 0x43, 0xE0, 0x64, 0x01, 0x60, 0x03, 0x02, 0x70, 0x1D, 0x90, 0x8A, 0xCF, 0xE0, 0x24,
++0x44, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0x64, 0x0A, 0x60, 0x5B, 0x90, 0x8A, 0xCF,
++0xE0, 0xFF, 0xEE, 0x24, 0x05, 0xFB, 0xE4, 0x33, 0xFA, 0x74, 0x21, 0x2F, 0xF5, 0x82, 0xE4, 0x34,
++0x86, 0xF5, 0x83, 0xE0, 0xFF, 0xD3, 0x9B, 0xEA, 0x64, 0x80, 0xF8, 0x74, 0x80, 0x98, 0x50, 0x38,
++0x90, 0x8A, 0xCF, 0xE0, 0xFE, 0xEF, 0x24, 0x05, 0xFB, 0xE4, 0x33, 0xFA, 0x74, 0x23, 0x2E, 0xF5,
++0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xD3, 0x9B, 0xEA, 0x64, 0x80, 0xF8, 0x74, 0x80, 0x98,
++0x50, 0x16, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x84, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0,
++0xFF, 0x90, 0x8A, 0xD1, 0xE0, 0x6F, 0x60, 0x56, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x23, 0xF5, 0x82,
++0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFF, 0xD3, 0x94, 0x42, 0x40, 0x08, 0x90, 0x8A, 0xDD, 0x74,
++0x05, 0xF0, 0x80, 0x11, 0xEF, 0xD3, 0x94, 0x39, 0x90, 0x8A, 0xDD, 0x40, 0x05, 0x74, 0x03, 0xF0,
++0x80, 0x03, 0x74, 0x01, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x24, 0x23, 0xF5, 0x82, 0xE4, 0x34,
++0x89, 0xF5, 0x83, 0xE0, 0xFE, 0x74, 0x21, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xEE,
++0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x44, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0x80, 0x2F, 0x90, 0x8A,
++0xCF, 0xE0, 0xFF, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, 0x74, 0x44,
++0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0x04, 0xF0, 0x80, 0x14, 0xE4, 0x90, 0x8A,
++0xDD, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4,
++0xF0, 0x90, 0x8A, 0xD1, 0xE0, 0xFE, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x24, 0x84, 0xF5, 0x82, 0xE4,
++0x34, 0x8A, 0xF5, 0x83, 0xEE, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0xFE, 0x74, 0x43, 0x2F, 0xF5, 0x82,
++0xE4, 0x34, 0x88, 0xF5, 0x83, 0xEE, 0xF0, 0x75, 0xF0, 0x09, 0xEF, 0x90, 0x87, 0x2B, 0x12, 0x43,
++0x5F, 0xE0, 0xB4, 0x01, 0x11, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0x74, 0x64, 0x2F, 0xF5, 0x82, 0xE4,
++0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0xFD, 0x21, 0xAC, 0xEC, 0x64, 0x06,
++0x60, 0x02, 0x21, 0xAF, 0x90, 0x8A, 0xD2, 0xF0, 0xA3, 0xF0, 0x90, 0x41, 0xDB, 0x93, 0xFF, 0x7E,
++0x00, 0x90, 0x8A, 0xD4, 0xE0, 0xFC, 0xA3, 0xE0, 0xFD, 0x12, 0x24, 0x7B, 0x90, 0x8A, 0xDB, 0xEE,
++0xF0, 0xA3, 0xEF, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x43, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5,
++0x83, 0xE0, 0x90, 0x8A, 0xDD, 0xF0, 0xE4, 0x90, 0x8A, 0xDA, 0xF0, 0x90, 0x8A, 0xDA, 0xE0, 0xFF,
++0xD3, 0x94, 0x04, 0x50, 0x47, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x75, 0xF0, 0x02, 0xEF, 0xA4,
++0xF5, 0x82, 0x85, 0xF0, 0x83, 0x12, 0x42, 0xC2, 0xFD, 0xAC, 0xF0, 0xEF, 0x90, 0x41, 0xD6, 0x93,
++0xFF, 0x7E, 0x00, 0x12, 0x24, 0x7B, 0x90, 0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0x90,
++0x8A, 0xDB, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0xD3, 0x90, 0x8A, 0xD3, 0xE0, 0x9F, 0x90, 0x8A, 0xD2,
++0xE0, 0x9E, 0x50, 0x08, 0x90, 0x8A, 0xDA, 0xE0, 0x04, 0xF0, 0x80, 0xAF, 0x90, 0x8A, 0xDA, 0xE0,
++0xC3, 0x13, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0xFF, 0xB4, 0x01, 0x0D, 0x90, 0x8A, 0xDA, 0xE0, 0x70,
++0x5D, 0x90, 0x8A, 0xDD, 0x04, 0xF0, 0x80, 0x5B, 0xEF, 0xB4, 0x03, 0x1D, 0x90, 0x8A, 0xDA, 0xE0,
++0xFF, 0x70, 0x08, 0x90, 0x8A, 0xDD, 0x74, 0x03, 0xF0, 0x80, 0x48, 0xEF, 0xB4, 0x01, 0x08, 0x90,
++0x8A, 0xDD, 0x74, 0x01, 0xF0, 0x80, 0x3C, 0x80, 0x35, 0x90, 0x8A, 0xDD, 0xE0, 0x64, 0x05, 0x70,
++0x32, 0x90, 0x8A, 0xDA, 0xE0, 0xFF, 0x70, 0x08, 0x90, 0x8A, 0xDD, 0x74, 0x05, 0xF0, 0x80, 0x0F,
++0xEF, 0x90, 0x8A, 0xDD, 0xB4, 0x01, 0x05, 0x74, 0x03, 0xF0, 0x80, 0x03, 0x74, 0x01, 0xF0, 0xD3,
++0x90, 0x8A, 0xD7, 0xE0, 0x94, 0x03, 0x90, 0x8A, 0xD6, 0xE0, 0x94, 0x00, 0x40, 0x05, 0xE4, 0x90,
++0x8A, 0xDD, 0xF0, 0xD3, 0x90, 0x8A, 0xD7, 0xE0, 0x94, 0x03, 0x90, 0x8A, 0xD6, 0xE0, 0x94, 0x00,
++0x40, 0x05, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0xFD, 0x90, 0x8A, 0xCF, 0xE0,
++0xFF, 0x24, 0x43, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xED, 0xF0, 0x12, 0x69, 0x38, 0x90,
++0x8A, 0xCF, 0xE0, 0xFF, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, 0xD3, 0x94,
++0x05, 0x50, 0x0F, 0x74, 0x64, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, 0x04, 0xF0,
++0x80, 0x0F, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4,
++0xF0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0xE4, 0xF5, 0xF0, 0x12, 0x42, 0xFA, 0xAB, 0x12, 0xAA,
++0x13, 0xA9, 0x14, 0x90, 0x00, 0x02, 0xE4, 0xF5, 0xF0, 0x12, 0x43, 0x19, 0x90, 0x00, 0x04, 0xE4,
++0xF5, 0xF0, 0x12, 0x43, 0x19, 0x90, 0x00, 0x06, 0xE4, 0xF5, 0xF0, 0x12, 0x43, 0x19, 0x90, 0x00,
++0x08, 0xE4, 0xF5, 0xF0, 0x12, 0x43, 0x19, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0xC0,
++0xF5, 0x82, 0xE4, 0x34, 0x85, 0xF5, 0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0x63,
++0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xA3,
++0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0x04,
++0xF0, 0x02, 0x6B, 0xC2, 0x22, 0xE4, 0x90, 0x8A, 0xCF, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0xC3,
++0x94, 0x10, 0x50, 0x14, 0x74, 0xA4, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE4, 0xF0,
++0x90, 0x8A, 0xCF, 0xE0, 0x04, 0xF0, 0x80, 0xE2, 0xE4, 0x90, 0x8A, 0xCF, 0xF0, 0x90, 0x8A, 0xCF,
++0xE0, 0xFF, 0xC3, 0x94, 0x20, 0x40, 0x02, 0x81, 0x0E, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x00,
++0x12, 0x43, 0x5F, 0xE4, 0xF0, 0xA3, 0xF0, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x02, 0x12, 0x43,
++0x5F, 0xE4, 0xF0, 0xA3, 0xF0, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x04, 0x12, 0x43, 0x5F, 0xE4,
++0xF0, 0xA3, 0xF0, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x06, 0x12, 0x43, 0x5F, 0xE4, 0xF0, 0xA3,
++0xF0, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x08, 0x12, 0x43, 0x5F, 0xE4, 0xF0, 0xA3, 0xF0, 0x74,
++0x84, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0x74, 0x13, 0xF0, 0x74, 0x44, 0x2F, 0xF5,
++0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE4, 0xF0, 0x74, 0x43, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x88,
++0xF5, 0x83, 0xE4, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xC0, 0xF5, 0x82, 0xE4, 0x34, 0x85, 0xF5, 0x83,
++0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0x63, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83,
++0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xE3, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83,
++0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xA3, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83,
++0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83,
++0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xA4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83,
++0xE4, 0xF0, 0xA3, 0xF0, 0x74, 0x44, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0,
++0x74, 0x24, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, 0x74, 0x64, 0x2F, 0xF5,
++0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, 0x90, 0x41, 0x8C, 0x93, 0xFE, 0x74, 0x01, 0x93,
++0xFF, 0x90, 0x41, 0x54, 0x74, 0x01, 0x93, 0x2F, 0xFF, 0xE4, 0x93, 0x3E, 0xC3, 0x13, 0xFE, 0xEF,
++0x13, 0xFF, 0x90, 0x8A, 0xCF, 0xE0, 0xFD, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86,
++0xF5, 0x83, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x29, 0x12, 0x43,
++0x5F, 0x74, 0x01, 0xF0, 0x74, 0xC1, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0x74, 0x0C,
++0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x25, 0x12, 0x43, 0x5F, 0x74, 0xFF, 0xF0, 0xA3, 0xF0,
++0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x23, 0x12, 0x43, 0x5F, 0xE4, 0xF0, 0xA3, 0x74, 0x0F, 0xF0,
++0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x27, 0x12, 0x43, 0x5F, 0x74, 0x13, 0xF0, 0x75, 0xF0, 0x09,
++0xED, 0x90, 0x87, 0x28, 0x12, 0x43, 0x5F, 0xE4, 0xF0, 0x74, 0x84, 0x2D, 0xF5, 0x82, 0xE4, 0x34,
++0x04, 0xF5, 0x83, 0x74, 0x13, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0x04, 0xF0, 0x41, 0x7D, 0x22, 0x12,
++0x24, 0x62, 0xFF, 0xC3, 0x94, 0x20, 0x50, 0x14, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFE, 0x74,
++0x23, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xEE, 0xF0, 0x22, 0xEF, 0xB4, 0x20, 0x0A,
++0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0x90, 0x87, 0x21, 0xF0, 0x22, 0x90, 0x8B, 0x4B, 0xEE, 0xF0,
++0xA3, 0xEF, 0xF0, 0xE4, 0xA3, 0xF0, 0xA3, 0xF0, 0x90, 0x8B, 0x4B, 0xE0, 0xFE, 0xA3, 0xE0, 0xF5,
++0x82, 0x8E, 0x83, 0xE0, 0x60, 0x2C, 0xC3, 0x90, 0x8B, 0x4E, 0xE0, 0x94, 0xE8, 0x90, 0x8B, 0x4D,
++0xE0, 0x94, 0x03, 0x40, 0x0A, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x10, 0xF0, 0x7F, 0x00, 0x22, 0x90,
++0x8B, 0x4D, 0xE4, 0x75, 0xF0, 0x01, 0x12, 0x42, 0x81, 0x7F, 0x0A, 0x7E, 0x00, 0x12, 0x32, 0x15,
++0x80, 0xC6, 0x7F, 0x01, 0x22, 0x12, 0x24, 0x62, 0xF5, 0x21, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3,
++0xC0, 0xD0, 0x90, 0x8A, 0xDA, 0x12, 0x25, 0x14, 0x00, 0x00, 0x00, 0x00, 0x90, 0x00, 0x01, 0x12,
++0x42, 0x20, 0x90, 0x8B, 0x1A, 0xF0, 0x90, 0x00, 0x03, 0x12, 0x42, 0x20, 0x90, 0x8B, 0x0A, 0xF0,
++0x12, 0x47, 0xFA, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFF, 0x30,
++0xE0, 0x25, 0x12, 0x24, 0x62, 0x90, 0x8B, 0x10, 0xF0, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0x90,
++0x8B, 0x11, 0xF0, 0xEF, 0xC3, 0x13, 0x54, 0x7F, 0x90, 0x8B, 0x0F, 0xF0, 0x90, 0x00, 0x03, 0x12,
++0x42, 0x20, 0x90, 0x8B, 0x16, 0xF0, 0x22, 0x90, 0x8B, 0x10, 0x74, 0x03, 0xF0, 0x90, 0x8B, 0x11,
++0x74, 0x05, 0xF0, 0x90, 0x8B, 0x0F, 0x74, 0x14, 0xF0, 0x90, 0x8B, 0x16, 0x74, 0x05, 0xF0, 0x22,
++0x12, 0x24, 0x62, 0x30, 0xE0, 0x19, 0xC3, 0x13, 0x54, 0x7F, 0x90, 0x8B, 0x15, 0xF0, 0x90, 0x00,
++0x01, 0x12, 0x42, 0x20, 0xFF, 0x90, 0x8B, 0x13, 0xE4, 0xF0, 0xA3, 0xEF, 0xF0, 0x80, 0x0F, 0x90,
++0x8B, 0x15, 0x74, 0x05, 0xF0, 0x90, 0x8B, 0x13, 0xE4, 0xF0, 0xA3, 0x74, 0x03, 0xF0, 0x90, 0x8B,
++0x13, 0xE0, 0xA3, 0xE0, 0x90, 0x05, 0x58, 0xF0, 0x22, 0x12, 0x24, 0x62, 0x90, 0x8B, 0x12, 0xF0,
++0x60, 0x07, 0xE4, 0xFD, 0x7F, 0x04, 0x12, 0x45, 0xA2, 0x90, 0x8B, 0x12, 0xE0, 0x90, 0x01, 0xE7,
++0xF0, 0x22, 0x90, 0x02, 0x09, 0xE0, 0xFD, 0x12, 0x24, 0x62, 0xFE, 0xAF, 0x05, 0xED, 0x2E, 0x90,
++0x8A, 0xF7, 0xF0, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0xFF, 0xED, 0x2F, 0x90, 0x8A, 0xF8, 0xF0,
++0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFF, 0xED, 0x2F, 0x90, 0x8A, 0xF9, 0xF0, 0x90, 0x00, 0x03,
++0x12, 0x42, 0x20, 0xFF, 0xED, 0x2F, 0x90, 0x8A, 0xFA, 0xF0, 0x90, 0x00, 0x04, 0x12, 0x42, 0x20,
++0xFF, 0xAE, 0x05, 0xED, 0x2F, 0x90, 0x8A, 0xFB, 0xF0, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0,
++0xD0, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x8B, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0x12, 0x24, 0x62, 0xC3,
++0x13, 0x20, 0xE0, 0x02, 0xC1, 0xED, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x12, 0x24, 0x62, 0xFF,
++0x54, 0x02, 0xFE, 0x90, 0x8B, 0x32, 0xE0, 0x54, 0xFD, 0x4E, 0xFE, 0xF0, 0xEF, 0x54, 0x01, 0xFF,
++0xEE, 0x54, 0xFE, 0x4F, 0xFF, 0xF0, 0x12, 0x24, 0x62, 0xFE, 0x54, 0x08, 0xFD, 0xEF, 0x54, 0xF7,
++0x4D, 0xFF, 0x90, 0x8B, 0x32, 0xF0, 0xEE, 0x54, 0x10, 0xFE, 0xEF, 0x54, 0xEF, 0x4E, 0xFF, 0xF0,
++0x12, 0x24, 0x62, 0xFE, 0x54, 0x20, 0xFD, 0xEF, 0x54, 0xDF, 0x4D, 0xFF, 0x90, 0x8B, 0x32, 0xF0,
++0xEE, 0x54, 0x40, 0xFE, 0xEF, 0x54, 0xBF, 0x4E, 0xF0, 0x20, 0xE0, 0x02, 0xC1, 0xD9, 0x90, 0x8A,
++0xDD, 0x74, 0x21, 0xF0, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x12, 0x24, 0x62, 0xFF, 0x13, 0x13,
++0x54, 0x01, 0xFE, 0x90, 0x8B, 0x32, 0xE0, 0xFD, 0x13, 0x13, 0x54, 0x01, 0x6E, 0x60, 0x2A, 0xEF,
++0x54, 0x04, 0xFF, 0xED, 0x54, 0xFB, 0x4F, 0xF0, 0xE0, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x0E,
++0x90, 0x01, 0x34, 0x74, 0x40, 0xF0, 0xFD, 0xE4, 0xFF, 0x12, 0x31, 0x9D, 0x80, 0x0B, 0xE4, 0x90,
++0x8B, 0x34, 0xF0, 0x7D, 0x40, 0xFF, 0x12, 0x31, 0x2C, 0x90, 0x8B, 0x32, 0xE0, 0xFD, 0x13, 0x13,
++0x13, 0x54, 0x1F, 0x30, 0xE0, 0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x44, 0x12, 0xF0, 0xED, 0xC4, 0x54,
++0x0F, 0x30, 0xE0, 0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x44, 0x14, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0xC4,
++0x13, 0x54, 0x07, 0x30, 0xE0, 0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x44, 0x80, 0xF0, 0x90, 0x8B, 0x32,
++0xE0, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x20, 0xE0, 0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x44, 0x40, 0xF0,
++0x90, 0x8A, 0xDD, 0xE0, 0x90, 0x05, 0x27, 0xF0, 0x90, 0x8B, 0x33, 0xE0, 0x70, 0x05, 0x7F, 0x01,
++0x12, 0x4E, 0x89, 0x90, 0x8B, 0x32, 0xE0, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x30, 0xE0, 0x04, 0x7F,
++0x03, 0x80, 0x0E, 0x7F, 0x01, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F,
++0x02, 0x12, 0x4E, 0x89, 0x7F, 0x02, 0x02, 0x78, 0x2E, 0x90, 0x8A, 0xDD, 0x74, 0x01, 0xF0, 0x90,
++0x05, 0x27, 0xF0, 0xE4, 0xFF, 0x12, 0x4E, 0x89, 0x7F, 0x03, 0x02, 0x78, 0x2E, 0x90, 0x8A, 0xDA,
++0x12, 0x43, 0x6B, 0x12, 0x24, 0x62, 0xFF, 0x54, 0x02, 0xFE, 0x90, 0x8B, 0x2C, 0xE0, 0x54, 0xFD,
++0x4E, 0xFE, 0xF0, 0xEF, 0x54, 0x01, 0xFF, 0xEE, 0x54, 0xFE, 0x4F, 0xFF, 0xF0, 0x12, 0x24, 0x62,
++0xFE, 0x54, 0x08, 0xFD, 0xEF, 0x54, 0xF7, 0x4D, 0xFF, 0x90, 0x8B, 0x2C, 0xF0, 0xEE, 0x54, 0x10,
++0xFE, 0xEF, 0x54, 0xEF, 0x4E, 0xFF, 0xF0, 0x12, 0x24, 0x62, 0xFE, 0x54, 0x40, 0xFD, 0xEF, 0x54,
++0xBF, 0x4D, 0xFF, 0x90, 0x8B, 0x2C, 0xF0, 0xEE, 0x54, 0x04, 0xFE, 0xEF, 0x54, 0xFB, 0x4E, 0xF0,
++0x20, 0xE0, 0x02, 0xE1, 0xE2, 0x90, 0x8A, 0xDD, 0x74, 0x31, 0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0x13,
++0x13, 0x54, 0x3F, 0x20, 0xE0, 0x0B, 0xE4, 0x90, 0x8B, 0x2E, 0xF0, 0x7D, 0x40, 0xFF, 0x12, 0x31,
++0x2C, 0x90, 0x8B, 0x2C, 0xE0, 0xFD, 0x13, 0x13, 0x13, 0x54, 0x1F, 0x30, 0xE0, 0x07, 0x90, 0x8A,
++0xDD, 0xE0, 0x44, 0x02, 0xF0, 0xED, 0xC4, 0x54, 0x0F, 0x30, 0xE0, 0x07, 0x90, 0x8A, 0xDD, 0xE0,
++0x44, 0x04, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0x54, 0x06, 0x60, 0x0C, 0x90, 0x01, 0x3E, 0x74, 0x03,
++0xF0, 0xFD, 0x7F, 0x02, 0x12, 0x31, 0xB7, 0x90, 0x8A, 0xDD, 0xE0, 0x90, 0x05, 0x27, 0xF0, 0x90,
++0x8B, 0x2C, 0xE0, 0xFF, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x30, 0xE0, 0x0D, 0xA3, 0xE0, 0x64, 0x06,
++0x60, 0x2C, 0x7F, 0x06, 0x12, 0x65, 0x82, 0x80, 0x25, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x06, 0x1B,
++0x7F, 0x01, 0x12, 0x65, 0x82, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x09, 0x7D, 0x01, 0xAF,
++0x23, 0x12, 0x45, 0xA2, 0x80, 0x05, 0x12, 0x4E, 0x56, 0x80, 0x03, 0x12, 0x7D, 0xC1, 0x7F, 0x01,
++0x80, 0x4C, 0x90, 0x8A, 0xDD, 0x74, 0x01, 0xF0, 0x90, 0x05, 0x27, 0xF0, 0x7D, 0x03, 0x7F, 0x02,
++0x12, 0x31, 0x49, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x06, 0x02, 0x80, 0x1B, 0x90, 0x8B, 0x2D, 0xE0,
++0xB4, 0x04, 0x02, 0x80, 0x07, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x04, 0xE4, 0xFF, 0x80, 0x14,
++0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x03, 0x04, 0x7F, 0x01, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4,
++0x02, 0x05, 0x7F, 0x01, 0x12, 0x65, 0x82, 0x11, 0x35, 0x12, 0x4A, 0xFC, 0x7F, 0x03, 0x11, 0x42,
++0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, 0x8B, 0x31, 0xE0, 0xB4, 0x01, 0x05, 0xE4, 0xF0, 0x12, 0x48,
++0xFE, 0x22, 0xAD, 0x07, 0xEF, 0x64, 0x01, 0x60, 0x04, 0xEF, 0xB4, 0x03, 0x15, 0x90, 0x8B, 0x32,
++0xE0, 0x54, 0xFE, 0xF0, 0x54, 0xFB, 0xF0, 0xE4, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0,
++0xA3, 0xF0, 0xED, 0x64, 0x02, 0x60, 0x04, 0xED, 0xB4, 0x03, 0x15, 0x90, 0x8B, 0x2C, 0xE0, 0x54,
++0xFE, 0xF0, 0x54, 0xFB, 0xF0, 0xE4, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0,
++0x22, 0x12, 0x24, 0x62, 0x90, 0x8B, 0x38, 0xF0, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0,
++0x90, 0x8A, 0xFD, 0xE0, 0x90, 0x8A, 0xE8, 0xF0, 0x90, 0x8A, 0xFE, 0xE0, 0xFF, 0xA3, 0xE0, 0x90,
++0x8A, 0xE9, 0xCF, 0xF0, 0xA3, 0xEF, 0xF0, 0xE4, 0x90, 0x8A, 0xE4, 0xF0, 0x90, 0x8A, 0xE4, 0xE0,
++0xFF, 0x24, 0x00, 0xF5, 0x82, 0xE4, 0x34, 0x8B, 0xF5, 0x83, 0xE0, 0xFE, 0x74, 0xEB, 0x2F, 0xF5,
++0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEE, 0xF0, 0x90, 0x8A, 0xE4, 0xE0, 0x04, 0xF0, 0xE0, 0xB4,
++0x04, 0xDA, 0x90, 0x8A, 0xE8, 0xE0, 0x12, 0x43, 0x94, 0x78, 0xF8, 0x00, 0x7A, 0x6B, 0x01, 0x79,
++0x01, 0x02, 0x79, 0x01, 0x03, 0x79, 0x01, 0x04, 0x7A, 0x6B, 0x05, 0x7A, 0x35, 0x80, 0x7A, 0x4E,
++0x81, 0x7A, 0x6B, 0x82, 0x00, 0x00, 0x7A, 0x67, 0x90, 0x8A, 0xEE, 0xE0, 0xFF, 0x51, 0x72, 0x41,
++0x6B, 0x90, 0x8A, 0xE8, 0xE0, 0xFF, 0xB4, 0x02, 0x08, 0x90, 0x8A, 0xE5, 0x74, 0x01, 0xF0, 0x80,
++0x0F, 0xEF, 0x90, 0x8A, 0xE5, 0xB4, 0x03, 0x05, 0x74, 0x02, 0xF0, 0x80, 0x03, 0x74, 0x04, 0xF0,
++0xC3, 0x90, 0x8A, 0xE9, 0xE0, 0x94, 0x08, 0x50, 0x78, 0xE4, 0x90, 0x8A, 0xE4, 0xF0, 0x90, 0x8A,
++0xE5, 0xE0, 0xFF, 0x90, 0x8A, 0xE4, 0xE0, 0xC3, 0x9F, 0x40, 0x02, 0x41, 0x6B, 0x90, 0x8A, 0xE9,
++0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0xC3, 0xEE, 0x94, 0x01, 0x90, 0x8A, 0xE4, 0xE0, 0x50, 0x1F, 0xFE,
++0x2F, 0xFF, 0xEE, 0xFD, 0xC3, 0x74, 0x03, 0x9D, 0xFD, 0xE4, 0x94, 0x00, 0xFC, 0x74, 0xEB, 0x2D,
++0xF5, 0x82, 0x74, 0x8A, 0x3C, 0xF5, 0x83, 0xE0, 0xFD, 0x12, 0x51, 0x88, 0x80, 0x2B, 0xFF, 0xFD,
++0xC3, 0x74, 0x03, 0x9D, 0xFD, 0xE4, 0x94, 0x00, 0xFC, 0x74, 0xEB, 0x2D, 0xF5, 0x82, 0x74, 0x8A,
++0x3C, 0xF5, 0x83, 0xE0, 0xFE, 0xEF, 0xFD, 0x90, 0x8A, 0xEA, 0xE0, 0x2D, 0xFD, 0x90, 0x8A, 0xE9,
++0xE0, 0x34, 0x00, 0x8D, 0x82, 0xF5, 0x83, 0xEE, 0xF0, 0x90, 0x8A, 0xE4, 0xE0, 0x04, 0xF0, 0x80,
++0x8D, 0xC3, 0x90, 0x8A, 0xE9, 0xE0, 0x94, 0x10, 0x40, 0x02, 0x41, 0x6B, 0x90, 0x8A, 0xE8, 0xE0,
++0x64, 0x04, 0x60, 0x02, 0x41, 0x6B, 0x90, 0x8A, 0xEC, 0xE0, 0xFF, 0xE4, 0xFC, 0xFD, 0xFE, 0x78,
++0x10, 0x12, 0x24, 0xF5, 0xC0, 0x04, 0xC0, 0x05, 0xC0, 0x06, 0xC0, 0x07, 0x90, 0x8A, 0xEB, 0xE0,
++0xFF, 0xE4, 0xFC, 0xFD, 0xFE, 0x78, 0x18, 0x12, 0x24, 0xF5, 0xD0, 0x03, 0xD0, 0x02, 0xD0, 0x01,
++0xD0, 0x00, 0x12, 0x43, 0x46, 0xC0, 0x04, 0xC0, 0x05, 0xC0, 0x06, 0xC0, 0x07, 0x90, 0x8A, 0xED,
++0xE0, 0xFF, 0xE4, 0xFC, 0xFD, 0xFE, 0x78, 0x08, 0x12, 0x24, 0xF5, 0xD0, 0x03, 0xD0, 0x02, 0xD0,
++0x01, 0xD0, 0x00, 0x12, 0x43, 0x46, 0xA8, 0x04, 0xA9, 0x05, 0xAA, 0x06, 0xAB, 0x07, 0xA3, 0xE0,
++0xFF, 0xE4, 0xFC, 0xFD, 0xFE, 0x12, 0x43, 0x46, 0xA3, 0x12, 0x25, 0x08, 0x90, 0x8A, 0xEF, 0x12,
++0x43, 0x53, 0x90, 0x80, 0x96, 0x12, 0x25, 0x08, 0x90, 0x8A, 0xE9, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF,
++0x12, 0x2B, 0x08, 0x80, 0x36, 0x90, 0x8A, 0xED, 0xE0, 0xFE, 0xA3, 0xE0, 0x24, 0x00, 0xFF, 0xE4,
++0x3E, 0xFE, 0x90, 0x8A, 0xE6, 0xF0, 0xA3, 0xEF, 0xF0, 0x12, 0x32, 0x15, 0x80, 0x1D, 0x90, 0x8A,
++0xED, 0xE0, 0xFE, 0xA3, 0xE0, 0x24, 0x00, 0xFF, 0xE4, 0x3E, 0xFE, 0x90, 0x8A, 0xE6, 0xF0, 0xA3,
++0xEF, 0xF0, 0x12, 0x31, 0x82, 0x80, 0x04, 0x7F, 0x00, 0x80, 0x02, 0x7F, 0x01, 0xD0, 0xD0, 0x92,
++0xAF, 0x22, 0x8F, 0x0F, 0xE4, 0x90, 0x8A, 0xF3, 0xF0, 0xE5, 0x0F, 0x14, 0xFE, 0x90, 0x8A, 0xF3,
++0xE0, 0xFF, 0xC3, 0x9E, 0x50, 0x0E, 0xEF, 0x04, 0xFD, 0x12, 0x2D, 0x4D, 0x90, 0x8A, 0xF3, 0xE0,
++0x04, 0xF0, 0x80, 0xE5, 0xE5, 0x0F, 0x14, 0xFF, 0x7D, 0xFF, 0x12, 0x2D, 0x4D, 0x90, 0x8A, 0xF3,
++0xE5, 0x0F, 0xF0, 0x90, 0x8A, 0xF3, 0xE0, 0xC3, 0x94, 0xFF, 0x50, 0x0F, 0xE0, 0xFF, 0x04, 0xFD,
++0x12, 0x2D, 0x4D, 0x90, 0x8A, 0xF3, 0xE0, 0x04, 0xF0, 0x80, 0xE8, 0xAD, 0x0F, 0x7F, 0xFF, 0x02,
++0x2D, 0x4D, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0xA3, 0x74,
++0x04, 0xF0, 0xA3, 0xE4, 0xF0, 0x90, 0x8A, 0xE2, 0xF0, 0xA3, 0xF0, 0x90, 0x02, 0x09, 0xE0, 0x90,
++0x8A, 0xE1, 0xF0, 0x12, 0x24, 0x62, 0xFF, 0x90, 0x8A, 0xE1, 0xE0, 0x2F, 0x90, 0x8A, 0xE0, 0xF0,
++0x30, 0xE0, 0x0B, 0x90, 0x8A, 0xDB, 0xE4, 0xF0, 0xA3, 0x74, 0x80, 0xF0, 0x80, 0x07, 0xE4, 0x90,
++0x8A, 0xDB, 0xF0, 0xA3, 0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0xC3, 0x13, 0x90, 0xFD, 0x10, 0xF0, 0x90,
++0x8A, 0xDD, 0xE0, 0x24, 0x20, 0xF0, 0x90, 0x8A, 0xDB, 0xA3, 0xE0, 0xFD, 0xA3, 0xE0, 0xFC, 0x2D,
++0xFF, 0x24, 0x01, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x90, 0x8A, 0xFD, 0xF0, 0x74,
++0x02, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0xFE, 0xEC, 0x2D, 0x24, 0x03, 0xF5,
++0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x24, 0x00, 0xFF, 0xE4, 0x3E, 0x90, 0x8A, 0xFE, 0xF0,
++0xA3, 0xEF, 0xF0, 0x90, 0x8A, 0xDA, 0x74, 0x04, 0xF0, 0x90, 0x8A, 0xDB, 0xA3, 0xE0, 0xFF, 0xA3,
++0xE0, 0x2F, 0xFF, 0x90, 0x8A, 0xDA, 0xE0, 0xFE, 0x2F, 0x24, 0x00, 0xF5, 0x82, 0xE4, 0x34, 0xFC,
++0xF5, 0x83, 0xE0, 0xFF, 0x74, 0xFC, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEF, 0xF0,
++0x90, 0x8A, 0xDA, 0xE0, 0x04, 0xF0, 0xE0, 0xB4, 0x08, 0xCF, 0x11, 0x89, 0xEF, 0x70, 0x45, 0x90,
++0x01, 0xC3, 0xE0, 0x60, 0x2B, 0xC3, 0x90, 0x8A, 0xE3, 0xE0, 0x94, 0xE8, 0x90, 0x8A, 0xE2, 0xE0,
++0x94, 0x03, 0x40, 0x09, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x10, 0xF0, 0x80, 0x79, 0x90, 0x8A, 0xE2,
++0xE4, 0x75, 0xF0, 0x01, 0x12, 0x42, 0x81, 0x7F, 0x0A, 0x7E, 0x00, 0x12, 0x32, 0x15, 0x80, 0xCF,
++0x90, 0x01, 0xC6, 0xE0, 0x90, 0x01, 0xC3, 0x30, 0xE2, 0x05, 0x74, 0xFE, 0xF0, 0x80, 0x57, 0x74,
++0xFF, 0xF0, 0x80, 0x52, 0x90, 0x8A, 0xDD, 0xE0, 0xB4, 0x78, 0x2E, 0xE4, 0xF0, 0x90, 0x8A, 0xE0,
++0xE0, 0x04, 0xF0, 0x90, 0x8A, 0xDB, 0xE0, 0x70, 0x04, 0xA3, 0xE0, 0x64, 0x80, 0x90, 0x8A, 0xDB,
++0x70, 0x05, 0xF0, 0xA3, 0xF0, 0x80, 0x06, 0xE4, 0xF0, 0xA3, 0x74, 0x80, 0xF0, 0x90, 0x8A, 0xE0,
++0xE0, 0xC3, 0x13, 0x90, 0xFD, 0x10, 0xF0, 0x80, 0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x24, 0x08, 0xF0,
++0x90, 0x8A, 0xDE, 0x74, 0xFF, 0xF5, 0xF0, 0x12, 0x42, 0x81, 0x90, 0x8A, 0xDE, 0xE0, 0x70, 0x02,
++0xA3, 0xE0, 0x60, 0x02, 0x61, 0x16, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x12, 0x24, 0x62, 0x90, 0x8B,
++0x05, 0xF0, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0x90, 0x8B, 0x06, 0xF0, 0x22, 0xE4, 0xF5, 0x61,
++0x22, 0x91, 0x4A, 0x90, 0x8B, 0x33, 0x74, 0x02, 0xF0, 0x22, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0,
++0x7F, 0x78, 0x7E, 0x08, 0x12, 0x22, 0x65, 0x90, 0x8B, 0x1C, 0x12, 0x25, 0x08, 0x7F, 0x04, 0x7E,
++0x0C, 0x12, 0x22, 0x65, 0x90, 0x8B, 0x20, 0x12, 0x25, 0x08, 0x7F, 0x00, 0x7E, 0x08, 0x12, 0x22,
++0x65, 0x90, 0x8B, 0x24, 0x12, 0x25, 0x08, 0x90, 0x8B, 0x09, 0xE0, 0x90, 0x8B, 0x1C, 0xB4, 0x01,
++0x0D, 0x12, 0x43, 0x53, 0xEF, 0x54, 0xC7, 0xFF, 0xED, 0x54, 0xC7, 0xFD, 0x80, 0x07, 0x12, 0x43,
++0x53, 0xEF, 0x54, 0xC7, 0xFF, 0xEC, 0x90, 0x80, 0x96, 0x12, 0x25, 0x08, 0x7F, 0x78, 0x7E, 0x08,
++0x12, 0x2B, 0x08, 0x90, 0x8B, 0x20, 0x12, 0x43, 0x53, 0xEF, 0x54, 0x0F, 0xFF, 0xEC, 0x90, 0x80,
++0x96, 0x12, 0x25, 0x08, 0x7F, 0x04, 0x7E, 0x0C, 0x12, 0x2B, 0x08, 0x90, 0x8B, 0x24, 0x12, 0x43,
++0x53, 0xEF, 0x44, 0x02, 0xFF, 0xEC, 0x90, 0x80, 0x96, 0x12, 0x25, 0x08, 0x7F, 0x00, 0x7E, 0x08,
++0x12, 0x2B, 0x08, 0x7F, 0x70, 0x7E, 0x0E, 0x12, 0x22, 0x65, 0x90, 0x8B, 0x28, 0x12, 0x25, 0x08,
++0x90, 0x80, 0x96, 0x12, 0x25, 0x14, 0x00, 0x1B, 0x25, 0xA0, 0x7F, 0x70, 0x7E, 0x0E, 0x12, 0x2B,
++0x08, 0x90, 0x80, 0x68, 0x12, 0x25, 0x14, 0x00, 0x00, 0x00, 0x00, 0xE4, 0xFD, 0xFF, 0x12, 0x30,
++0x2C, 0x90, 0x8B, 0x09, 0xE0, 0xB4, 0x01, 0x11, 0x90, 0x80, 0x68, 0x12, 0x25, 0x14, 0x00, 0x00,
++0x00, 0x00, 0xE4, 0xFD, 0x7F, 0x01, 0x12, 0x30, 0x2C, 0x90, 0x00, 0x11, 0xE0, 0x54, 0xF6, 0xF0,
++0x02, 0x52, 0x0E, 0x91, 0x50, 0x90, 0x8B, 0x33, 0x74, 0x02, 0xF0, 0x22, 0x90, 0x05, 0x22, 0x74,
++0xFF, 0xF0, 0x90, 0x8B, 0x33, 0x74, 0x04, 0xF0, 0x22, 0xB1, 0x42, 0x90, 0x8B, 0x33, 0x74, 0x04,
++0xF0, 0x22, 0x90, 0x00, 0x11, 0xE0, 0x44, 0x09, 0xF0, 0x12, 0x52, 0x0E, 0x90, 0x8B, 0x1C, 0x12,
++0x43, 0x53, 0x90, 0x80, 0x96, 0x12, 0x25, 0x08, 0x7F, 0x78, 0x7E, 0x08, 0x12, 0x2B, 0x08, 0x90,
++0x8B, 0x20, 0x12, 0x43, 0x53, 0x90, 0x80, 0x96, 0x12, 0x25, 0x08, 0x7F, 0x04, 0x7E, 0x0C, 0x12,
++0x2B, 0x08, 0x90, 0x8B, 0x24, 0x12, 0x43, 0x53, 0x90, 0x80, 0x96, 0x12, 0x25, 0x08, 0x7F, 0x00,
++0x7E, 0x08, 0x12, 0x2B, 0x08, 0x90, 0x8B, 0x28, 0x12, 0x43, 0x53, 0x90, 0x80, 0x96, 0x12, 0x25,
++0x08, 0x7F, 0x70, 0x7E, 0x0E, 0x12, 0x2B, 0x08, 0x90, 0x80, 0x68, 0x12, 0x25, 0x14, 0x00, 0x03,
++0x2D, 0x95, 0xE4, 0xFD, 0xFF, 0x12, 0x30, 0x2C, 0x90, 0x8B, 0x09, 0xE0, 0xB4, 0x01, 0x11, 0x90,
++0x80, 0x68, 0x12, 0x25, 0x14, 0x00, 0x03, 0x2D, 0x95, 0xE4, 0xFD, 0x7F, 0x01, 0x12, 0x30, 0x2C,
++0x22, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x06, 0x60, 0x3C, 0xE5, 0x22, 0x54, 0x0F, 0x14, 0x60, 0x2E,
++0x14, 0x60, 0x1E, 0x24, 0xFE, 0x60, 0x0E, 0x24, 0xF8, 0x70, 0x2A, 0xE4, 0x90, 0x8B, 0x2D, 0xF0,
++0x90, 0x05, 0x22, 0xF0, 0x22, 0x90, 0x8B, 0x2D, 0x74, 0x01, 0xF0, 0x90, 0x05, 0x22, 0xE4, 0xF0,
++0x22, 0x90, 0x8B, 0x2D, 0x74, 0x03, 0xF0, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x22, 0x90, 0x01,
++0xC6, 0xE0, 0x44, 0x08, 0xF0, 0x22, 0xAE, 0x07, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x18,
++0x90, 0x8B, 0x2C, 0xE0, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x20, 0xE0, 0x0C, 0xAF, 0x06, 0x7D, 0x01,
++0x12, 0x45, 0xA2, 0xB1, 0xC1, 0x7F, 0x01, 0x22, 0x7F, 0x00, 0x22, 0x90, 0x01, 0x57, 0xE0, 0x60,
++0x3C, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x02, 0xF0, 0x90, 0x8B, 0x1B, 0xE0,
++0x60, 0x07, 0xE4, 0xF0, 0x53, 0x25, 0xFD, 0x80, 0x24, 0x90, 0x8B, 0x0C, 0xE0, 0x04, 0xF0, 0x53,
++0x25, 0xEF, 0x90, 0x8B, 0x10, 0xE0, 0xFF, 0x90, 0x8B, 0x0C, 0xE0, 0xD3, 0x9F, 0x40, 0x0E, 0xE5,
++0x21, 0xB4, 0x01, 0x09, 0x90, 0x8B, 0x0D, 0xE0, 0x70, 0x03, 0xE0, 0x04, 0xF0, 0x90, 0x01, 0x5B,
++0xE0, 0x60, 0x10, 0x90, 0x01, 0x5B, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x04, 0xF0, 0xE4, 0x90,
++0x8B, 0x18, 0xF0, 0x90, 0x01, 0x5F, 0xE0, 0x60, 0x10, 0x90, 0x01, 0x5F, 0xE4, 0xF0, 0x90, 0x01,
++0x3C, 0x74, 0x08, 0xF0, 0xE4, 0x90, 0x8B, 0x17, 0xF0, 0x22, 0xE4, 0x90, 0x8B, 0x4F, 0xF0, 0xA3,
++0xF0, 0x90, 0x05, 0xF8, 0xE0, 0x70, 0x0F, 0xA3, 0xE0, 0x70, 0x0B, 0xA3, 0xE0, 0x70, 0x07, 0xA3,
++0xE0, 0x70, 0x03, 0x7F, 0x01, 0x22, 0xD3, 0x90, 0x8B, 0x50, 0xE0, 0x94, 0xE8, 0x90, 0x8B, 0x4F,
++0xE0, 0x94, 0x03, 0x40, 0x03, 0x7F, 0x00, 0x22, 0x7F, 0x32, 0x7E, 0x00, 0x12, 0x32, 0x15, 0x90,
++0x8B, 0x4F, 0xE4, 0x75, 0xF0, 0x01, 0x12, 0x42, 0x81, 0x80, 0xC6, 0x00, 0xFB, 0x98};
++
++// =================== v88 UMC B Cut P2PPS with CCX report C2H 2012-12-05 =====================
++u8 Rtl8192CUFwUMCBCutImgArray[UMCBCutImgArrayLength] = {
++0xC2, 0x88, 0x02, 0x05, 0x58, 0x00, 0x02, 0x00, 0x12, 0x05, 0x17, 0x10, 0xC0, 0x3E, 0x01, 0x00,
++0x94, 0x18, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0x02, 0x46, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0x00, 0x00, 0x00, 0x02, 0x60, 0xF3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0x00, 0x00, 0x00, 0x02, 0x67, 0x5B, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x4B, 0x87, 0x00, 0x00,
++0x05, 0x04, 0x03, 0x02, 0x00, 0x03, 0x06, 0x05, 0x04, 0x03, 0x00, 0x04, 0x06, 0x05, 0x04, 0x02,
++0x00, 0x04, 0x08, 0x07, 0x06, 0x04, 0x00, 0x06, 0x0A, 0x09, 0x08, 0x06, 0x00, 0x08, 0x0A, 0x09,
++0x08, 0x04, 0x00, 0x08, 0x0A, 0x09, 0x08, 0x02, 0x00, 0x08, 0x0A, 0x09, 0x08, 0x00, 0x00, 0x08,
++0x12, 0x11, 0x10, 0x08, 0x00, 0x10, 0x1A, 0x19, 0x18, 0x10, 0x00, 0x18, 0x22, 0x21, 0x20, 0x18,
++0x00, 0x20, 0x22, 0x21, 0x20, 0x10, 0x00, 0x20, 0x22, 0x21, 0x20, 0x08, 0x00, 0x20, 0x22, 0x21,
++0x1C, 0x08, 0x00, 0x20, 0x22, 0x21, 0x14, 0x08, 0x00, 0x20, 0x22, 0x20, 0x18, 0x08, 0x00, 0x20,
++0x31, 0x30, 0x20, 0x10, 0x00, 0x30, 0x31, 0x30, 0x18, 0x00, 0x00, 0x30, 0x31, 0x2F, 0x10, 0x10,
++0x00, 0x30, 0x31, 0x2C, 0x10, 0x10, 0x00, 0x30, 0x31, 0x28, 0x10, 0x00, 0x00, 0x30, 0x31, 0x20,
++0x10, 0x00, 0x00, 0x30, 0x31, 0x10, 0x10, 0x00, 0x00, 0x30, 0x04, 0x04, 0x04, 0x05, 0x04, 0x04,
++0x05, 0x07, 0x07, 0x07, 0x08, 0x0A, 0x04, 0x04, 0x04, 0x04, 0x06, 0x0A, 0x0B, 0x0D, 0x05, 0x05,
++0x07, 0x07, 0x08, 0x0B, 0x0D, 0x0F, 0x04, 0x04, 0x04, 0x05, 0x07, 0x07, 0x09, 0x09, 0x0C, 0x0E,
++0x10, 0x12, 0x06, 0x07, 0x09, 0x0A, 0x0C, 0x0E, 0x11, 0x13, 0x09, 0x09, 0x09, 0x09, 0x0C, 0x0E,
++0x11, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x24, 0x26, 0x2A, 0x18, 0x1A,
++0x1D, 0x1F, 0x21, 0x27, 0x29, 0x2A, 0x00, 0x00, 0x00, 0x1F, 0x23, 0x28, 0x2A, 0x2C, 0x00, 0x04,
++0x00, 0x04, 0x00, 0x08, 0x00, 0x10, 0x00, 0x18, 0x00, 0x24, 0x00, 0x30, 0x00, 0x48, 0x00, 0x60,
++0x00, 0x90, 0x00, 0xC0, 0x00, 0xD8, 0x00, 0x50, 0x00, 0x78, 0x00, 0xA0, 0x00, 0xC8, 0x01, 0x40,
++0x01, 0x90, 0x01, 0xE0, 0x02, 0x30, 0x01, 0x2C, 0x01, 0x40, 0x01, 0xE0, 0x02, 0xD0, 0x03, 0xE8,
++0x04, 0xB0, 0x06, 0x40, 0x07, 0xD0, 0x00, 0x02, 0x00, 0x02, 0x00, 0x04, 0x00, 0x08, 0x00, 0x0C,
++0x00, 0x12, 0x00, 0x18, 0x00, 0x24, 0x00, 0x30, 0x00, 0x48, 0x00, 0x60, 0x00, 0x6C, 0x00, 0x28,
++0x00, 0x3C, 0x00, 0x50, 0x00, 0x64, 0x00, 0xA0, 0x00, 0xC8, 0x00, 0xF0, 0x01, 0x18, 0x00, 0x64,
++0x00, 0xA0, 0x00, 0xF0, 0x01, 0x68, 0x01, 0xF4, 0x02, 0x58, 0x03, 0x20, 0x03, 0xE8, 0x02, 0x02,
++0x02, 0x02, 0x02, 0x02, 0x03, 0x03, 0x04, 0x04, 0x05, 0x07, 0x02, 0x03, 0x04, 0x0A, 0x0C, 0x0E,
++0x10, 0x12, 0x05, 0x07, 0x07, 0x08, 0x0B, 0x12, 0x24, 0x3C, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02,
++0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x05, 0x06,
++0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x20, 0x1E, 0x1C, 0x18, 0x10, 0x18, 0x00, 0x00, 0x00, 0x00,
++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0xBB, 0x01, 0x0C, 0xE5, 0x82, 0x29, 0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE0, 0x22, 0x50,
++0x06, 0xE9, 0x25, 0x82, 0xF8, 0xE6, 0x22, 0xBB, 0xFE, 0x06, 0xE9, 0x25, 0x82, 0xF8, 0xE2, 0x22,
++0xE5, 0x82, 0x29, 0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE4, 0x93, 0x22, 0xBB, 0x01, 0x06,
++0x89, 0x82, 0x8A, 0x83, 0xF0, 0x22, 0x50, 0x02, 0xF7, 0x22, 0xBB, 0xFE, 0x01, 0xF3, 0x22, 0xF8,
++0xBB, 0x01, 0x0D, 0xE5, 0x82, 0x29, 0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE8, 0xF0, 0x22,
++0x50, 0x06, 0xE9, 0x25, 0x82, 0xC8, 0xF6, 0x22, 0xBB, 0xFE, 0x05, 0xE9, 0x25, 0x82, 0xC8, 0xF2,
++0x22, 0xC5, 0xF0, 0xF8, 0xA3, 0xE0, 0x28, 0xF0, 0xC5, 0xF0, 0xF8, 0xE5, 0x82, 0x15, 0x82, 0x70,
++0x02, 0x15, 0x83, 0xE0, 0x38, 0xF0, 0x22, 0xBB, 0x01, 0x0A, 0x89, 0x82, 0x8A, 0x83, 0xE0, 0xF5,
++0xF0, 0xA3, 0xE0, 0x22, 0x50, 0x06, 0x87, 0xF0, 0x09, 0xE7, 0x19, 0x22, 0xBB, 0xFE, 0x07, 0xE3,
++0xF5, 0xF0, 0x09, 0xE3, 0x19, 0x22, 0x89, 0x82, 0x8A, 0x83, 0xE4, 0x93, 0xF5, 0xF0, 0x74, 0x01,
++0x93, 0x22, 0xBB, 0x01, 0x10, 0xE5, 0x82, 0x29, 0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE0,
++0xF5, 0xF0, 0xA3, 0xE0, 0x22, 0x50, 0x09, 0xE9, 0x25, 0x82, 0xF8, 0x86, 0xF0, 0x08, 0xE6, 0x22,
++0xBB, 0xFE, 0x0A, 0xE9, 0x25, 0x82, 0xF8, 0xE2, 0xF5, 0xF0, 0x08, 0xE2, 0x22, 0xE5, 0x83, 0x2A,
++0xF5, 0x83, 0xE9, 0x93, 0xF5, 0xF0, 0xA3, 0xE9, 0x93, 0x22, 0xBB, 0x01, 0x0A, 0x89, 0x82, 0x8A,
++0x83, 0xF0, 0xE5, 0xF0, 0xA3, 0xF0, 0x22, 0x50, 0x06, 0xF7, 0x09, 0xA7, 0xF0, 0x19, 0x22, 0xBB,
++0xFE, 0x06, 0xF3, 0xE5, 0xF0, 0x09, 0xF3, 0x19, 0x22, 0xF8, 0xBB, 0x01, 0x11, 0xE5, 0x82, 0x29,
++0xF5, 0x82, 0xE5, 0x83, 0x3A, 0xF5, 0x83, 0xE8, 0xF0, 0xE5, 0xF0, 0xA3, 0xF0, 0x22, 0x50, 0x09,
++0xE9, 0x25, 0x82, 0xC8, 0xF6, 0x08, 0xA6, 0xF0, 0x22, 0xBB, 0xFE, 0x09, 0xE9, 0x25, 0x82, 0xC8,
++0xF2, 0xE5, 0xF0, 0x08, 0xF2, 0x22, 0xEF, 0x4B, 0xFF, 0xEE, 0x4A, 0xFE, 0xED, 0x49, 0xFD, 0xEC,
++0x48, 0xFC, 0x22, 0xE0, 0xFC, 0xA3, 0xE0, 0xFD, 0xA3, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0x22, 0xA4,
++0x25, 0x82, 0xF5, 0x82, 0xE5, 0xF0, 0x35, 0x83, 0xF5, 0x83, 0x22, 0xE0, 0xFB, 0xA3, 0xE0, 0xFA,
++0xA3, 0xE0, 0xF9, 0x22, 0xF8, 0xE0, 0xFB, 0xA3, 0xA3, 0xE0, 0xF9, 0x25, 0xF0, 0xF0, 0xE5, 0x82,
++0x15, 0x82, 0x70, 0x02, 0x15, 0x83, 0xE0, 0xFA, 0x38, 0xF0, 0x22, 0xEB, 0xF0, 0xA3, 0xEA, 0xF0,
++0xA3, 0xE9, 0xF0, 0x22, 0xD0, 0x83, 0xD0, 0x82, 0xF8, 0xE4, 0x93, 0x70, 0x12, 0x74, 0x01, 0x93,
++0x70, 0x0D, 0xA3, 0xA3, 0x93, 0xF8, 0x74, 0x01, 0x93, 0xF5, 0x82, 0x88, 0x83, 0xE4, 0x73, 0x74,
++0x02, 0x93, 0x68, 0x60, 0xEF, 0xA3, 0xA3, 0xA3, 0x80, 0xDF, 0xD0, 0x83, 0xD0, 0x82, 0xF8, 0xE4,
++0x93, 0x70, 0x12, 0x74, 0x01, 0x93, 0x70, 0x0D, 0xA3, 0xA3, 0x93, 0xF8, 0x74, 0x01, 0x93, 0xF5,
++0x82, 0x88, 0x83, 0xE4, 0x73, 0x74, 0x02, 0x93, 0xB5, 0xF0, 0x06, 0x74, 0x03, 0x93, 0x68, 0x60,
++0xE9, 0xA3, 0xA3, 0xA3, 0xA3, 0x80, 0xD8, 0xE4, 0x90, 0x8A, 0xC5, 0xF0, 0xE5, 0x24, 0x70, 0x03,
++0x02, 0x44, 0x9D, 0xE5, 0x21, 0x64, 0x01, 0x60, 0x03, 0x02, 0x44, 0x9D, 0xE5, 0x24, 0x14, 0x60,
++0x29, 0x24, 0xFD, 0x60, 0x25, 0x24, 0x02, 0x24, 0xFB, 0x50, 0x02, 0x80, 0x23, 0x90, 0x8B, 0x0B,
++0xE0, 0x14, 0xF0, 0xE0, 0x60, 0x04, 0xA3, 0xE0, 0x60, 0x16, 0x90, 0x8B, 0x0B, 0xE0, 0x70, 0x0A,
++0x90, 0x8B, 0x19, 0xE0, 0x90, 0x8B, 0x0B, 0xF0, 0x80, 0x00, 0x90, 0x8A, 0xC5, 0x74, 0x01, 0xF0,
++0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x16, 0xA3, 0xE0, 0xB4, 0x06, 0x05, 0xE4, 0x90, 0x8A, 0xC5,
++0xF0, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x70, 0x04, 0x90, 0x8A, 0xC5, 0xF0, 0x90, 0x8A, 0xC5,
++0xE0, 0x60, 0x4A, 0x43, 0x25, 0x10, 0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x8B, 0x0C, 0xE0, 0x75,
++0xF0, 0x03, 0xA4, 0xFF, 0x90, 0x8B, 0x15, 0xE0, 0x2F, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB, 0xFD,
++0x7F, 0x54, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x57, 0x74, 0x05, 0xF0, 0xE5, 0x22, 0x54,
++0x0F, 0xC3, 0x94, 0x04, 0x50, 0x07, 0x7D, 0x01, 0x7F, 0x04, 0x12, 0x45, 0xA2, 0x90, 0x8B, 0x2C,
++0xE0, 0x30, 0xE0, 0x09, 0x12, 0x66, 0x20, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x22, 0xE4, 0xF5,
++0x25, 0xF5, 0x24, 0x75, 0x23, 0x0C, 0x75, 0x22, 0x0C, 0x90, 0x8B, 0x1A, 0xF0, 0x90, 0x8B, 0x18,
++0xF0, 0x90, 0x8B, 0x17, 0xF0, 0x90, 0x8B, 0x19, 0x04, 0xF0, 0x90, 0x8B, 0x0B, 0xF0, 0xE4, 0x90,
++0x8B, 0x1B, 0xF0, 0x90, 0x8B, 0x0D, 0xF0, 0x90, 0x8B, 0x15, 0x74, 0x05, 0xF0, 0xE4, 0x90, 0x8B,
++0x0C, 0xF0, 0x90, 0x8B, 0x13, 0xF0, 0xA3, 0x74, 0x03, 0xF0, 0x90, 0x8B, 0x10, 0xF0, 0xA3, 0x74,
++0x05, 0xF0, 0x90, 0x8B, 0x0F, 0x74, 0x14, 0xF0, 0x90, 0x8B, 0x16, 0x74, 0x05, 0xF0, 0xE4, 0x90,
++0x8B, 0x0E, 0xF0, 0x90, 0x8B, 0x0A, 0xF0, 0x90, 0x8B, 0x08, 0xF0, 0x90, 0x8B, 0x12, 0xF0, 0x22,
++0x7F, 0x00, 0x22, 0x02, 0x45, 0x03, 0x02, 0x45, 0x06, 0x8E, 0x64, 0x8F, 0x65, 0xAD, 0x65, 0xAC,
++0x64, 0xAF, 0x63, 0x12, 0x4A, 0x5B, 0xAF, 0x65, 0xAE, 0x64, 0x90, 0x04, 0x80, 0xE0, 0x54, 0x0F,
++0xFD, 0xAC, 0x07, 0x74, 0x11, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x01,
++0xF0, 0x74, 0x11, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x54, 0xFB, 0xF0, 0xAC,
++0x07, 0x74, 0x16, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0xFA, 0xF0, 0x74,
++0x15, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x1F, 0xF0, 0xAC, 0x07, 0x74,
++0x06, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x0F, 0xF0, 0x90, 0x04, 0x53,
++0xE4, 0xF0, 0x90, 0x04, 0x52, 0xF0, 0x90, 0x04, 0x51, 0x74, 0xFF, 0xF0, 0x90, 0x04, 0x50, 0x74,
++0xFD, 0xF0, 0x74, 0x14, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x54, 0xC0, 0x4D,
++0xFD, 0x74, 0x14, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xED, 0xF0, 0x22, 0x7D, 0x01,
++0x7F, 0x0C, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x8F, 0x67, 0x8D, 0x68, 0xE5, 0x67, 0x54,
++0x0F, 0xFF, 0xE5, 0x22, 0x54, 0x0F, 0x6F, 0x60, 0x72, 0xE5, 0x67, 0x30, 0xE2, 0x30, 0xE5, 0x22,
++0x20, 0xE2, 0x05, 0x7F, 0x01, 0x12, 0x4A, 0xB2, 0xE5, 0x22, 0x30, 0xE3, 0x10, 0xE5, 0x67, 0x20,
++0xE3, 0x0B, 0x12, 0x49, 0xD5, 0xEF, 0x60, 0x53, 0x12, 0x4A, 0xCC, 0x80, 0x4E, 0xE5, 0x22, 0x20,
++0xE3, 0x49, 0xE5, 0x67, 0x30, 0xE3, 0x44, 0xAF, 0x68, 0x12, 0x4A, 0x7C, 0x80, 0x3D, 0xE5, 0x22,
++0x54, 0x0F, 0xFF, 0xBF, 0x0C, 0x0E, 0xE5, 0x67, 0x20, 0xE3, 0x09, 0x12, 0x49, 0xD5, 0xEF, 0x60,
++0x2A, 0x12, 0x4A, 0xCC, 0xE5, 0x22, 0x54, 0x0F, 0xFF, 0xBF, 0x04, 0x0E, 0xE5, 0x67, 0x20, 0xE2,
++0x09, 0x12, 0x49, 0x93, 0xEF, 0x60, 0x14, 0x12, 0x4A, 0x32, 0xE5, 0x22, 0x54, 0x0F, 0xFF, 0xBF,
++0x02, 0x09, 0x12, 0x45, 0x00, 0xEF, 0x60, 0x03, 0x12, 0x4B, 0x10, 0xD0, 0xD0, 0x92, 0xAF, 0x22,
++0x02, 0x46, 0x6E, 0x02, 0x51, 0x39, 0xE4, 0x93, 0xA3, 0xF8, 0xE4, 0x93, 0xA3, 0x40, 0x03, 0xF6,
++0x80, 0x01, 0xF2, 0x08, 0xDF, 0xF4, 0x80, 0x29, 0xE4, 0x93, 0xA3, 0xF8, 0x54, 0x07, 0x24, 0x0C,
++0xC8, 0xC3, 0x33, 0xC4, 0x54, 0x0F, 0x44, 0x20, 0xC8, 0x83, 0x40, 0x04, 0xF4, 0x56, 0x80, 0x01,
++0x46, 0xF6, 0xDF, 0xE4, 0x80, 0x0B, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x90, 0x4B,
++0x23, 0xE4, 0x7E, 0x01, 0x93, 0x60, 0xBC, 0xA3, 0xFF, 0x54, 0x3F, 0x30, 0xE5, 0x09, 0x54, 0x1F,
++0xFE, 0xE4, 0x93, 0xA3, 0x60, 0x01, 0x0E, 0xCF, 0x54, 0xC0, 0x25, 0xE0, 0x60, 0xA8, 0x40, 0xB8,
++0xE4, 0x93, 0xA3, 0xFA, 0xE4, 0x93, 0xA3, 0xF8, 0xE4, 0x93, 0xA3, 0xC8, 0xC5, 0x82, 0xC8, 0xCA,
++0xC5, 0x83, 0xCA, 0xF0, 0xA3, 0xC8, 0xC5, 0x82, 0xC8, 0xCA, 0xC5, 0x83, 0xCA, 0xDF, 0xE9, 0xDE,
++0xE7, 0x80, 0xBE, 0xE5, 0x21, 0x64, 0x01, 0x70, 0x67, 0xE5, 0x24, 0x60, 0x63, 0xE5, 0x24, 0x64,
++0x02, 0x60, 0x06, 0xE5, 0x24, 0x64, 0x05, 0x70, 0x27, 0x90, 0x06, 0xAB, 0xE0, 0x90, 0x8B, 0x0B,
++0xF0, 0x90, 0x06, 0xAA, 0xE0, 0x90, 0x8B, 0x19, 0xF0, 0x90, 0x8B, 0x0B, 0xE0, 0x70, 0x07, 0x90,
++0x8B, 0x19, 0xE0, 0xFF, 0x80, 0x05, 0x90, 0x8B, 0x0B, 0xE0, 0xFF, 0x90, 0x8B, 0x0B, 0xEF, 0xF0,
++0x90, 0x8B, 0x0D, 0xE0, 0x60, 0x02, 0xE4, 0xF0, 0xE4, 0x90, 0x8B, 0x0C, 0xF0, 0x90, 0x05, 0x58,
++0x74, 0x03, 0xF0, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x02, 0xF0, 0x53, 0x25,
++0xFD, 0x53, 0x25, 0xEF, 0xE5, 0x24, 0x14, 0x24, 0xFD, 0x50, 0x02, 0x80, 0x03, 0x12, 0x47, 0x8E,
++0x22, 0xEF, 0x64, 0x01, 0x70, 0x35, 0x7D, 0x78, 0x7F, 0x02, 0x12, 0x36, 0x75, 0x7D, 0x02, 0x7F,
++0x03, 0x12, 0x36, 0x75, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x02, 0xF0, 0x12,
++0x45, 0x9E, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x03, 0x12, 0x66, 0x20, 0x90, 0x06, 0x04, 0xE0,
++0x54, 0x7F, 0xF0, 0x90, 0x06, 0x0A, 0xE0, 0x54, 0xF8, 0xF0, 0x22, 0x90, 0x01, 0x36, 0x74, 0x7B,
++0xF0, 0xA3, 0x74, 0x02, 0xF0, 0x7D, 0x7B, 0xFF, 0x12, 0x36, 0xE6, 0x7D, 0x02, 0x7F, 0x03, 0x12,
++0x36, 0xE6, 0x90, 0x06, 0x04, 0xE0, 0x44, 0x80, 0xF0, 0x90, 0x06, 0x0A, 0xE0, 0x44, 0x07, 0xF0,
++0x12, 0x4B, 0x4F, 0xE5, 0x21, 0x20, 0xE0, 0x05, 0xE4, 0x90, 0x8B, 0x0D, 0xF0, 0x22, 0xE4, 0x90,
++0x8A, 0xC5, 0xF0, 0x90, 0x06, 0xA9, 0xE0, 0x90, 0x8A, 0xC5, 0xF0, 0xE0, 0x54, 0xC0, 0x70, 0x09,
++0x53, 0x25, 0xFE, 0x53, 0x25, 0xFD, 0x12, 0x4A, 0xFC, 0x90, 0x8A, 0xC5, 0xE0, 0x30, 0xE6, 0x15,
++0x43, 0x25, 0x01, 0x90, 0x8B, 0x1A, 0xE0, 0x64, 0x02, 0x60, 0x05, 0x12, 0x4A, 0x97, 0x80, 0x08,
++0x12, 0x49, 0x49, 0x80, 0x03, 0x53, 0x25, 0xFE, 0x90, 0x8A, 0xC5, 0xE0, 0x30, 0xE7, 0x27, 0x43,
++0x25, 0x02, 0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x8B, 0x11, 0xE0, 0x90, 0x8B, 0x3E, 0xF0, 0xE4,
++0xFB, 0xFD, 0x7F, 0x54, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x57, 0x74, 0x05, 0xF0, 0x90,
++0x8B, 0x1B, 0x74, 0x01, 0xF0, 0x22, 0x53, 0x25, 0xFD, 0x22, 0x90, 0x8A, 0xDE, 0x12, 0x43, 0x8B,
++0x12, 0x4B, 0x43, 0x90, 0x8A, 0xDE, 0x12, 0x43, 0x6B, 0x12, 0x29, 0xD9, 0xF5, 0x24, 0x14, 0x60,
++0x0E, 0x14, 0x60, 0x1F, 0x14, 0x60, 0x31, 0x24, 0x03, 0x70, 0x44, 0x7F, 0x01, 0x80, 0x3D, 0x90,
++0x8A, 0xDE, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFD, 0xE4, 0xFF, 0x12, 0x4A,
++0x07, 0x80, 0x29, 0x90, 0x8A, 0xDE, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFD,
++0x7F, 0x01, 0x12, 0x4A, 0x07, 0x1F, 0x80, 0x14, 0x90, 0x8A, 0xDE, 0x12, 0x43, 0x6B, 0x90, 0x00,
++0x02, 0x12, 0x42, 0x20, 0xFD, 0x7F, 0x02, 0x12, 0x4A, 0x07, 0xE4, 0xFF, 0x12, 0x47, 0x21, 0x22,
++0xE4, 0x90, 0x8A, 0xCB, 0xF0, 0xE5, 0x24, 0x60, 0x49, 0x90, 0x8B, 0x1B, 0xE0, 0x60, 0x0D, 0xE4,
++0xF0, 0x53, 0x25, 0xFD, 0xE5, 0x25, 0x54, 0x07, 0x70, 0x38, 0x80, 0x33, 0x90, 0x8B, 0x0C, 0xE0,
++0x04, 0xF0, 0x53, 0x25, 0xEF, 0x90, 0x8A, 0xCB, 0xE0, 0xFF, 0x90, 0x8B, 0x10, 0xE0, 0x2F, 0xFF,
++0xE4, 0x33, 0xFE, 0x90, 0x8B, 0x0C, 0xE0, 0xD3, 0x9F, 0xEE, 0x64, 0x80, 0xF8, 0x74, 0x80, 0x98,
++0x40, 0x0D, 0xE5, 0x21, 0xB4, 0x01, 0x0B, 0xA3, 0xE0, 0x70, 0x07, 0xE0, 0x04, 0xF0, 0x22, 0x12,
++0x4A, 0xFC, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x8F, 0x63, 0x90, 0x04, 0x1D, 0xE0,
++0x60, 0x24, 0x90, 0x05, 0x22, 0xE0, 0xF5, 0x66, 0x74, 0xFF, 0xF0, 0x12, 0x7E, 0x2D, 0xBF, 0x01,
++0x0D, 0x90, 0x8A, 0xF9, 0xE0, 0xFF, 0x7D, 0x01, 0x12, 0x5F, 0xDE, 0x12, 0x45, 0x09, 0x90, 0x05,
++0x22, 0xE5, 0x66, 0xF0, 0x80, 0x0D, 0x90, 0x8A, 0xF9, 0xE0, 0xFF, 0x7D, 0x01, 0x12, 0x5F, 0xDE,
++0x12, 0x45, 0x09, 0x90, 0x04, 0x1F, 0x74, 0x20, 0xF0, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xE5, 0x24,
++0x14, 0x24, 0xFD, 0x50, 0x02, 0x80, 0x41, 0x90, 0x8B, 0x1A, 0xE0, 0x60, 0x2B, 0x12, 0x45, 0x9E,
++0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x8B, 0x0F, 0xE0, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB, 0xFD,
++0x7F, 0x58, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x5B, 0x74, 0x05, 0xF0, 0x90, 0x06, 0x92,
++0x74, 0x01, 0xF0, 0x90, 0x8B, 0x18, 0xF0, 0x22, 0xE5, 0x22, 0x54, 0x0F, 0xC3, 0x94, 0x04, 0x50,
++0x07, 0x7D, 0x01, 0x7F, 0x04, 0x12, 0x45, 0xA2, 0x22, 0x90, 0x01, 0x5F, 0xE4, 0xF0, 0x90, 0x01,
++0x3C, 0x74, 0x08, 0xF0, 0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x8B, 0x0F, 0xE0, 0x90, 0x8B, 0x3E,
++0xF0, 0xE4, 0xFB, 0xFD, 0x7F, 0x5C, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x5F, 0x74, 0x05,
++0xF0, 0x90, 0x06, 0x92, 0x74, 0x02, 0xF0, 0x90, 0x8B, 0x17, 0x14, 0xF0, 0xE5, 0x22, 0x54, 0x0F,
++0xC3, 0x94, 0x0C, 0x50, 0x0D, 0x12, 0x45, 0x9E, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x03, 0x12,
++0x66, 0x20, 0x22, 0x12, 0x4B, 0x34, 0xEF, 0x64, 0x01, 0x70, 0x37, 0xE5, 0x25, 0x54, 0x03, 0x70,
++0x31, 0xE5, 0x23, 0x54, 0x0F, 0xD3, 0x94, 0x02, 0x50, 0x28, 0xE5, 0x25, 0x20, 0xE2, 0x23, 0xE5,
++0x25, 0x20, 0xE4, 0x1E, 0x90, 0x8B, 0x0D, 0xE0, 0x70, 0x18, 0x90, 0x8B, 0x12, 0xE0, 0x70, 0x12,
++0xE5, 0x26, 0x70, 0x0E, 0x90, 0x01, 0xB9, 0xE4, 0xF0, 0x90, 0x01, 0xB8, 0x74, 0x04, 0xF0, 0x7F,
++0x01, 0x22, 0x7F, 0x00, 0x22, 0x12, 0x4B, 0x34, 0xEF, 0x64, 0x01, 0x70, 0x27, 0x90, 0x8B, 0x18,
++0xE0, 0x70, 0x21, 0x90, 0x8B, 0x17, 0xE0, 0x70, 0x1B, 0xE5, 0x23, 0x54, 0x0F, 0xD3, 0x94, 0x04,
++0x50, 0x12, 0xE5, 0x26, 0x70, 0x0E, 0x90, 0x01, 0xB9, 0xE4, 0xF0, 0x90, 0x01, 0xB8, 0x74, 0x08,
++0xF0, 0x7F, 0x01, 0x22, 0x7F, 0x00, 0x22, 0xEF, 0x24, 0xFE, 0x60, 0x0B, 0x04, 0x70, 0x22, 0x90,
++0x8B, 0x19, 0x74, 0x01, 0xF0, 0x80, 0x16, 0xED, 0x70, 0x0A, 0x90, 0x8B, 0x16, 0xE0, 0x90, 0x8B,
++0x19, 0xF0, 0x80, 0x05, 0x90, 0x8B, 0x19, 0xED, 0xF0, 0x90, 0x8B, 0x19, 0xE0, 0x90, 0x8B, 0x0B,
++0xF0, 0x22, 0x90, 0x01, 0x37, 0x74, 0x02, 0xF0, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x12, 0x7E,
++0x2D, 0xEF, 0x70, 0x06, 0x90, 0x01, 0xC8, 0x74, 0xFD, 0xF0, 0x7D, 0x02, 0x7F, 0x03, 0x12, 0x36,
++0xE6, 0x12, 0x7A, 0x6D, 0x53, 0x22, 0xF0, 0x43, 0x22, 0x02, 0x22, 0xEF, 0x60, 0x0F, 0x74, 0x21,
++0x2D, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x10, 0xF0, 0x22, 0x74, 0x21, 0x2D,
++0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x54, 0xEF, 0xF0, 0x22, 0x90, 0x06, 0x04, 0xE0,
++0x54, 0xBF, 0xF0, 0xEF, 0x60, 0x0A, 0xE5, 0x21, 0xB4, 0x01, 0x05, 0xE4, 0xFF, 0x12, 0x48, 0xB3,
++0x53, 0x22, 0xF0, 0x43, 0x22, 0x0C, 0x22, 0x90, 0x04, 0x1D, 0xE0, 0x70, 0x14, 0x90, 0x8A, 0xF8,
++0xE0, 0xFF, 0xE4, 0xFD, 0x12, 0x5F, 0xDE, 0x8E, 0x69, 0x8F, 0x6A, 0x90, 0x04, 0x1F, 0x74, 0x20,
++0xF0, 0x22, 0x90, 0x8B, 0x52, 0xEF, 0xF0, 0x12, 0x4F, 0xED, 0x90, 0x8B, 0x52, 0xE0, 0x60, 0x05,
++0x90, 0x05, 0x22, 0xE4, 0xF0, 0x53, 0x22, 0xF0, 0x43, 0x22, 0x04, 0x22, 0x90, 0x06, 0x04, 0xE0,
++0x44, 0x40, 0xF0, 0xE5, 0x21, 0xB4, 0x01, 0x05, 0x7F, 0x01, 0x12, 0x48, 0xB3, 0x53, 0x22, 0xF0,
++0x43, 0x22, 0x04, 0x22, 0xE5, 0x23, 0x30, 0xE6, 0x12, 0xE5, 0x23, 0x54, 0x0F, 0xFF, 0x90, 0x01,
++0x2F, 0xE0, 0x54, 0x80, 0x4F, 0x64, 0x80, 0xF0, 0x53, 0x23, 0xBF, 0x22, 0x90, 0x8B, 0x2C, 0xE0,
++0x30, 0xE0, 0x05, 0xAF, 0x23, 0x02, 0x66, 0x65, 0x7D, 0x01, 0xAF, 0x23, 0x12, 0x45, 0xA2, 0x22,
++0x53, 0x22, 0xF0, 0x43, 0x22, 0x01, 0x12, 0x4B, 0x5A, 0x12, 0x4B, 0x5B, 0x53, 0x22, 0xF0, 0x43,
++0x22, 0x02, 0x22, 0x41, 0x8A, 0xF6, 0x00, 0x41, 0x8B, 0x05, 0x00, 0x41, 0x8B, 0x51, 0x00, 0x41,
++0x8B, 0x53, 0x00, 0x00, 0x90, 0x04, 0x1B, 0xE0, 0x54, 0x7F, 0x64, 0x7F, 0x7F, 0x01, 0x60, 0x02,
++0x7F, 0x00, 0x22, 0xE4, 0x90, 0x8B, 0x1B, 0xF0, 0x90, 0x8B, 0x0C, 0xF0, 0xF5, 0x25, 0x22, 0x90,
++0x8B, 0x13, 0xE0, 0xA3, 0xE0, 0x90, 0x05, 0x58, 0xF0, 0x22, 0x22, 0x22, 0xF0, 0x90, 0x8B, 0x0F,
++0xE0, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB, 0xFD, 0x7F, 0x58, 0x7E, 0x01, 0xD3, 0x10, 0xAF, 0x01,
++0xC3, 0xC0, 0xD0, 0x90, 0x8B, 0x3D, 0xE0, 0xFB, 0xA3, 0xE0, 0xF5, 0x44, 0xE4, 0xF5, 0x45, 0x12,
++0x35, 0xAB, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xC0, 0xE0, 0xC0, 0xF0, 0xC0, 0x83, 0xC0, 0x82, 0xC0,
++0xD0, 0x75, 0xD0, 0x00, 0xC0, 0x00, 0xC0, 0x01, 0xC0, 0x02, 0xC0, 0x03, 0xC0, 0x04, 0xC0, 0x05,
++0xC0, 0x06, 0xC0, 0x07, 0x75, 0x0E, 0x00, 0x90, 0x01, 0xC4, 0x74, 0x87, 0xF0, 0x74, 0x4B, 0xA3,
++0xF0, 0x53, 0x91, 0xDF, 0x90, 0x01, 0x3C, 0xE0, 0x55, 0x30, 0xF5, 0x34, 0xA3, 0xE0, 0x55, 0x31,
++0xF5, 0x35, 0xA3, 0xE0, 0x55, 0x32, 0xF5, 0x36, 0xA3, 0xE0, 0x55, 0x33, 0xF5, 0x37, 0xE5, 0x34,
++0x30, 0xE0, 0x51, 0x90, 0x01, 0x3C, 0x74, 0x01, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0x30, 0xE0, 0x1F,
++0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x18, 0x90, 0x8B, 0x34, 0xE4, 0xF0, 0x90, 0x8B, 0x33, 0xE0,
++0x64, 0x03, 0x60, 0x0B, 0x7F, 0x01, 0xB1, 0xE0, 0xEF, 0x70, 0x04, 0x7F, 0x02, 0xD1, 0x89, 0x90,
++0x8B, 0x2C, 0xE0, 0xFF, 0x30, 0xE0, 0x1D, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x16, 0x90, 0x8B,
++0x2E, 0xE4, 0xF0, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x06, 0x60, 0x09, 0xE4, 0xFF, 0xB1, 0xE0, 0xEF,
++0x70, 0x02, 0xD1, 0x56, 0xE5, 0x34, 0x30, 0xE1, 0x08, 0x90, 0x01, 0x3C, 0x74, 0x02, 0xF0, 0x11,
++0x60, 0xE5, 0x34, 0x30, 0xE2, 0x28, 0x90, 0x01, 0x3C, 0x74, 0x04, 0xF0, 0x90, 0x06, 0x92, 0xE0,
++0x30, 0xE0, 0x14, 0x90, 0x8B, 0x3D, 0xE4, 0x71, 0x5C, 0x90, 0x01, 0x5B, 0x74, 0x05, 0xF0, 0x90,
++0x06, 0x92, 0x74, 0x01, 0xF0, 0x80, 0x07, 0x90, 0x8B, 0x18, 0xE4, 0xF0, 0x51, 0xFC, 0xE5, 0x34,
++0x30, 0xE3, 0x38, 0x90, 0x01, 0x3C, 0x74, 0x08, 0xF0, 0x90, 0x06, 0x92, 0xE0, 0x30, 0xE1, 0x24,
++0x90, 0x8B, 0x3D, 0xE4, 0xF0, 0x90, 0x8B, 0x0F, 0xE0, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB, 0xFD,
++0x7F, 0x5C, 0x7E, 0x01, 0x71, 0x6C, 0x90, 0x01, 0x5F, 0x74, 0x05, 0xF0, 0x90, 0x06, 0x92, 0x74,
++0x02, 0xF0, 0x80, 0x07, 0x90, 0x8B, 0x17, 0xE4, 0xF0, 0x51, 0xFC, 0xE5, 0x34, 0x30, 0xE4, 0x09,
++0x90, 0x01, 0x3C, 0x74, 0x10, 0xF0, 0x12, 0x52, 0x3C, 0xE5, 0x34, 0x30, 0xE5, 0x06, 0x90, 0x01,
++0x3C, 0x74, 0x20, 0xF0, 0xE5, 0x35, 0x30, 0xE0, 0x10, 0x90, 0x01, 0x3D, 0x74, 0x01, 0xF0, 0x90,
++0x00, 0x83, 0xE0, 0xF5, 0x23, 0x51, 0xE4, 0x51, 0xFC, 0xE5, 0x35, 0x30, 0xE2, 0x06, 0x90, 0x01,
++0x3D, 0x74, 0x04, 0xF0, 0xE5, 0x35, 0x30, 0xE4, 0x1B, 0x90, 0x01, 0x3D, 0x74, 0x10, 0xF0, 0x90,
++0x8B, 0x05, 0xE0, 0x60, 0x0F, 0xE4, 0xF0, 0x90, 0x05, 0x53, 0xE0, 0x44, 0x01, 0xF0, 0x90, 0x05,
++0xFD, 0xE0, 0x04, 0xF0, 0xE5, 0x36, 0x30, 0xE0, 0x75, 0x90, 0x01, 0x3E, 0x74, 0x01, 0xF0, 0x90,
++0x8B, 0x32, 0xE0, 0x30, 0xE0, 0x18, 0x90, 0x8B, 0x36, 0xE4, 0xF0, 0x90, 0x8B, 0x33, 0xE0, 0x64,
++0x03, 0x60, 0x0B, 0x7F, 0x01, 0xB1, 0xE0, 0xEF, 0x60, 0x04, 0x7F, 0x01, 0xD1, 0x89, 0x90, 0x8B,
++0x2C, 0xE0, 0x30, 0xE0, 0x49, 0x90, 0x8B, 0x30, 0xE4, 0xF0, 0xFF, 0xB1, 0xE0, 0xEF, 0x60, 0x3E,
++0x12, 0x65, 0xF0, 0x90, 0x8B, 0x2D, 0xE0, 0xFF, 0x64, 0x06, 0x60, 0x32, 0xEF, 0xB4, 0x04, 0x02,
++0x80, 0x07, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x04, 0xE4, 0xFF, 0x80, 0x14, 0x90, 0x8B, 0x2D,
++0xE0, 0xB4, 0x03, 0x04, 0x7F, 0x01, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02, 0x05, 0x7F,
++0x01, 0x12, 0x7B, 0x49, 0x7D, 0x01, 0xAF, 0x23, 0x12, 0x45, 0xA2, 0x12, 0x66, 0x20, 0xE5, 0x36,
++0x30, 0xE1, 0x47, 0x90, 0x01, 0x3E, 0x74, 0x02, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0x30, 0xE0, 0x19,
++0x90, 0x8B, 0x36, 0x74, 0x01, 0xF0, 0x90, 0x8B, 0x33, 0xE0, 0x64, 0x03, 0x60, 0x0B, 0x7F, 0x01,
++0xB1, 0xE0, 0xEF, 0x70, 0x04, 0x7F, 0x02, 0xD1, 0x89, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x1A,
++0x90, 0x8B, 0x30, 0x74, 0x01, 0xF0, 0x12, 0x7D, 0xBE, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x06, 0x60,
++0x09, 0xE4, 0xFF, 0xB1, 0xE0, 0xEF, 0x70, 0x02, 0xD1, 0x56, 0x74, 0x87, 0x04, 0x90, 0x01, 0xC4,
++0xF0, 0x74, 0x4B, 0xA3, 0xF0, 0xD0, 0x07, 0xD0, 0x06, 0xD0, 0x05, 0xD0, 0x04, 0xD0, 0x03, 0xD0,
++0x02, 0xD0, 0x01, 0xD0, 0x00, 0xD0, 0xD0, 0xD0, 0x82, 0xD0, 0x83, 0xD0, 0xF0, 0xD0, 0xE0, 0x32,
++0xEF, 0x64, 0x01, 0x70, 0x3D, 0x90, 0x8B, 0x35, 0xE0, 0x60, 0x03, 0x7F, 0x00, 0x22, 0x90, 0x8B,
++0x08, 0xE0, 0x60, 0x03, 0x7F, 0x01, 0x22, 0x90, 0x8B, 0x34, 0xE0, 0x60, 0x03, 0x7F, 0x01, 0x22,
++0x90, 0x8B, 0x32, 0xE0, 0xFF, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x0B, 0xEF, 0xC4, 0x13, 0x54,
++0x07, 0x30, 0xE0, 0x03, 0x7F, 0x00, 0x22, 0x90, 0x8B, 0x36, 0xE0, 0x7F, 0x01, 0x60, 0x36, 0x7F,
++0x00, 0x22, 0x90, 0x8B, 0x2F, 0xE0, 0x60, 0x03, 0x7F, 0x00, 0x22, 0x90, 0x8B, 0x08, 0xE0, 0x60,
++0x03, 0x7F, 0x01, 0x22, 0x90, 0x8B, 0x2E, 0xE0, 0x60, 0x03, 0x7F, 0x01, 0x22, 0x90, 0x8B, 0x2C,
++0xE0, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x03, 0x7F, 0x00, 0x22, 0x90, 0x8B, 0x30, 0xE0, 0x7F,
++0x01, 0x60, 0x02, 0x7F, 0x00, 0x22, 0x90, 0x8B, 0x0D, 0xE0, 0x60, 0x16, 0x90, 0x8B, 0x2D, 0xE0,
++0x70, 0x04, 0x7F, 0x05, 0x80, 0x1F, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x01, 0x70, 0x1A, 0x7F, 0x02,
++0x80, 0x13, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x01, 0x04, 0x7F, 0x03, 0x80, 0x08, 0x90, 0x8B, 0x2D,
++0xE0, 0x70, 0x05, 0x7F, 0x04, 0x12, 0x7B, 0x49, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0,
++0x90, 0x8B, 0x33, 0xE0, 0x90, 0x8B, 0x55, 0xF0, 0x6F, 0x70, 0x02, 0xE1, 0x55, 0xEF, 0x14, 0x60,
++0x3B, 0x14, 0x60, 0x5F, 0x14, 0x70, 0x02, 0xE1, 0x30, 0x24, 0x03, 0x60, 0x02, 0xE1, 0x55, 0x90,
++0x8B, 0x55, 0xE0, 0xB4, 0x03, 0x04, 0xF1, 0xC0, 0xE1, 0x55, 0x90, 0x8B, 0x55, 0xE0, 0xB4, 0x02,
++0x04, 0xF1, 0xAD, 0xE1, 0x55, 0x90, 0x8B, 0x55, 0xE0, 0xB4, 0x04, 0x04, 0xF1, 0xC4, 0xE1, 0x55,
++0x90, 0x8B, 0x55, 0xE0, 0x64, 0x01, 0x70, 0x7D, 0xF1, 0xAF, 0x80, 0x79, 0x90, 0x8B, 0x55, 0xE0,
++0xFF, 0xB4, 0x03, 0x04, 0xF1, 0xC8, 0x80, 0x6D, 0xEF, 0xB4, 0x02, 0x04, 0xF1, 0xA0, 0x80, 0x65,
++0x90, 0x8B, 0x55, 0xE0, 0xFF, 0xB4, 0x04, 0x04, 0xF1, 0xD3, 0x80, 0x59, 0xEF, 0x70, 0x56, 0xF1,
++0x8D, 0x80, 0x52, 0x90, 0x8B, 0x55, 0xE0, 0xB4, 0x03, 0x05, 0x12, 0x7A, 0x5E, 0x80, 0x46, 0x90,
++0x8B, 0x55, 0xE0, 0xB4, 0x01, 0x04, 0xF1, 0x71, 0x80, 0x3B, 0x90, 0x8B, 0x55, 0xE0, 0xB4, 0x04,
++0x05, 0x12, 0x7B, 0x37, 0x80, 0x2F, 0x90, 0x8B, 0x55, 0xE0, 0x70, 0x29, 0xF1, 0x6F, 0x80, 0x25,
++0x90, 0x8B, 0x55, 0xE0, 0xFF, 0xB4, 0x01, 0x04, 0xF1, 0x5A, 0x80, 0x19, 0xEF, 0xB4, 0x02, 0x04,
++0xF1, 0x6B, 0x80, 0x11, 0x90, 0x8B, 0x55, 0xE0, 0xFF, 0xB4, 0x04, 0x04, 0xF1, 0x5A, 0x80, 0x05,
++0xEF, 0x70, 0x02, 0xF1, 0x67, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, 0x05, 0x22, 0x74, 0x6F, 0xF0,
++0x90, 0x8B, 0x33, 0x74, 0x03, 0xF0, 0x22, 0xF1, 0x8D, 0x80, 0xEF, 0xF1, 0xED, 0x80, 0xEB, 0xF1,
++0x8D, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x12, 0x7E, 0x2D, 0xEF, 0x70, 0x06, 0x90, 0x01, 0xC8,
++0x74, 0xFD, 0xF0, 0x12, 0x7A, 0x6D, 0x90, 0x8B, 0x33, 0x74, 0x02, 0xF0, 0x22, 0x90, 0x01, 0x3E,
++0x74, 0x03, 0xF0, 0xFD, 0x7F, 0x02, 0x12, 0x37, 0x00, 0x90, 0x8B, 0x33, 0x74, 0x01, 0xF0, 0x22,
++0xF1, 0xED, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x33, 0x04, 0xF0, 0x22, 0xF1, 0xA0, 0x7D,
++0x03, 0x7F, 0x02, 0x12, 0x36, 0x92, 0x90, 0x05, 0x27, 0xE4, 0xF0, 0x90, 0x8B, 0x33, 0xF0, 0x22,
++0xF1, 0xC8, 0x80, 0xEB, 0xF1, 0xD3, 0x80, 0xE7, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x33,
++0x04, 0xF0, 0x22, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x33, 0x04, 0xF0, 0x22, 0xF1, 0x8D,
++0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x90, 0x8B, 0x33, 0x74, 0x04, 0xF0, 0x22, 0x90, 0x8B, 0x1C,
++0x12, 0x43, 0x53, 0x90, 0x80, 0x85, 0x12, 0x2A, 0x7F, 0x7F, 0x78, 0x7E, 0x08, 0x12, 0x2F, 0xD9,
++0x90, 0x8B, 0x20, 0x12, 0x43, 0x53, 0x90, 0x80, 0x85, 0x12, 0x2A, 0x7F, 0x7F, 0x04, 0x7E, 0x0C,
++0x12, 0x2F, 0xD9, 0x90, 0x8B, 0x24, 0x12, 0x43, 0x53, 0x90, 0x80, 0x85, 0x12, 0x2A, 0x7F, 0x7F,
++0x00, 0x7E, 0x08, 0x12, 0x2F, 0xD9, 0x90, 0x8B, 0x28, 0x12, 0x43, 0x53, 0x90, 0x80, 0x85, 0x12,
++0x2A, 0x7F, 0x7F, 0x70, 0x7E, 0x0E, 0x12, 0x2F, 0xD9, 0x90, 0x80, 0x59, 0x12, 0x2A, 0x8B, 0x00,
++0x03, 0x2D, 0x95, 0xE4, 0xFD, 0xFF, 0x12, 0x34, 0x81, 0x90, 0x8B, 0x09, 0xE0, 0xB4, 0x01, 0x11,
++0x90, 0x80, 0x59, 0x12, 0x2A, 0x8B, 0x00, 0x03, 0x2D, 0x95, 0xE4, 0xFD, 0x7F, 0x01, 0x12, 0x34,
++0x81, 0x22, 0x90, 0x02, 0x84, 0xEF, 0xF0, 0xA3, 0xEE, 0xF0, 0xA3, 0x74, 0x05, 0xF0, 0x22, 0xEF,
++0x8E, 0xF0, 0x12, 0x43, 0xBA, 0x50, 0x8D, 0x00, 0x40, 0x50, 0xB5, 0x00, 0x80, 0x50, 0xE0, 0x01,
++0x00, 0x50, 0xF4, 0x02, 0x00, 0x51, 0x0C, 0x04, 0x00, 0x00, 0x00, 0x51, 0x29, 0xED, 0x54, 0x3F,
++0x70, 0x04, 0xFE, 0xFF, 0x80, 0x04, 0x7E, 0x00, 0x7F, 0x40, 0xEF, 0x2D, 0xFF, 0xEE, 0x3C, 0xFE,
++0xEF, 0x78, 0x06, 0xCE, 0xC3, 0x13, 0xCE, 0x13, 0xD8, 0xF9, 0x78, 0x06, 0xC3, 0x33, 0xCE, 0x33,
++0xCE, 0xD8, 0xF9, 0x80, 0x26, 0xED, 0x54, 0x7F, 0x70, 0x04, 0xFE, 0xFF, 0x80, 0x04, 0x7E, 0x00,
++0x7F, 0x80, 0xEF, 0x2D, 0xFF, 0xEE, 0x3C, 0xFE, 0xEF, 0x78, 0x07, 0xCE, 0xC3, 0x13, 0xCE, 0x13,
++0xD8, 0xF9, 0x78, 0x07, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFD, 0xAC, 0x06, 0x80, 0x49,
++0xED, 0x70, 0x04, 0xFE, 0xFF, 0x80, 0x04, 0x7E, 0x01, 0x7F, 0x00, 0xEF, 0x2D, 0xEE, 0x3C, 0x7D,
++0x00, 0xFC, 0x80, 0x35, 0xEC, 0x54, 0x01, 0x4D, 0x70, 0x04, 0xFE, 0xFF, 0x80, 0x04, 0x7E, 0x02,
++0x7F, 0x00, 0xEF, 0x2D, 0xEE, 0x3C, 0xC3, 0x13, 0x7D, 0x00, 0x80, 0x1A, 0xEC, 0x54, 0x03, 0x4D,
++0x70, 0x04, 0xFE, 0xFF, 0x80, 0x04, 0x7E, 0x04, 0x7F, 0x00, 0xEF, 0x2D, 0xEE, 0x3C, 0x13, 0x13,
++0x54, 0x3F, 0x7D, 0x00, 0x25, 0xE0, 0x25, 0xE0, 0xFC, 0xAE, 0x04, 0xAF, 0x05, 0x22, 0x90, 0x01,
++0xE4, 0x74, 0x58, 0xF0, 0xA3, 0x74, 0x02, 0xF0, 0x22, 0xE4, 0x90, 0x8A, 0xCC, 0xF0, 0xA3, 0xF0,
++0x75, 0x8E, 0x02, 0x91, 0x81, 0x12, 0x67, 0x0E, 0x90, 0x8B, 0x07, 0xEF, 0xF0, 0x12, 0x67, 0x1B,
++0x90, 0x8B, 0x09, 0xEF, 0xF0, 0x12, 0x67, 0x27, 0x90, 0x8A, 0xF4, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0,
++0xE4, 0xF5, 0x55, 0xF5, 0x21, 0x12, 0x71, 0x16, 0x12, 0x44, 0x9E, 0x12, 0x32, 0x3D, 0x7F, 0x03,
++0x12, 0x76, 0xAB, 0x12, 0x7A, 0x5A, 0x12, 0x66, 0xD4, 0x12, 0x67, 0x3F, 0x12, 0x67, 0x54, 0x12,
++0x66, 0xF2, 0x12, 0x67, 0x0D, 0x90, 0x8A, 0xCE, 0xE5, 0xD9, 0xF0, 0x31, 0xD2, 0xC2, 0xAF, 0x90,
++0x00, 0x80, 0xE0, 0x44, 0x40, 0xF0, 0x51, 0x81, 0x75, 0xE8, 0x03, 0x43, 0xA8, 0x85, 0xD2, 0xAF,
++0x31, 0x2E, 0x90, 0x8A, 0xCC, 0xE0, 0x64, 0x01, 0xF0, 0x24, 0x39, 0x90, 0x01, 0xC4, 0xF0, 0x74,
++0x51, 0xA3, 0xF0, 0xE5, 0x55, 0x30, 0xE4, 0x09, 0xC2, 0xAF, 0x53, 0x55, 0xEF, 0xD2, 0xAF, 0xB1,
++0xCC, 0xE5, 0x55, 0x30, 0xE6, 0xDC, 0xC2, 0xAF, 0x53, 0x55, 0xBF, 0xD2, 0xAF, 0x12, 0x68, 0x42,
++0x80, 0xD0, 0x90, 0x01, 0x3C, 0x74, 0xFF, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0x90, 0x01, 0x34, 0xF0,
++0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xFD, 0x7F, 0x54, 0x31, 0xFB, 0x7D, 0xFF, 0x7F, 0x55, 0x31,
++0xFB, 0x7D, 0xFF, 0x7F, 0x56, 0x31, 0xFB, 0x7D, 0xFF, 0x7F, 0x57, 0xD3, 0x10, 0xAF, 0x01, 0xC3,
++0xC0, 0xD0, 0x8F, 0x82, 0x75, 0x83, 0x00, 0xED, 0xF0, 0x51, 0x81, 0xD0, 0xD0, 0x92, 0xAF, 0x22,
++0x90, 0x01, 0x30, 0xE4, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0x90, 0x01, 0x38, 0xF0, 0xA3,
++0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xFD, 0x7F, 0x50, 0x31, 0xFB, 0xE4, 0xFD, 0x7F, 0x51, 0x31, 0xFB,
++0xE4, 0xFD, 0x7F, 0x52, 0x31, 0xFB, 0xE4, 0xFD, 0x7F, 0x53, 0x80, 0xBF, 0xE5, 0x5E, 0x64, 0x01,
++0x70, 0x3B, 0x71, 0xC1, 0xBF, 0x01, 0x04, 0x7F, 0x01, 0x71, 0xB5, 0x90, 0x00, 0x46, 0xE0, 0x44,
++0x04, 0xFD, 0x7F, 0x46, 0x31, 0xFB, 0x90, 0x00, 0x44, 0xE0, 0x54, 0xFB, 0xFD, 0x7F, 0x44, 0x31,
++0xFB, 0x90, 0x00, 0x46, 0xE0, 0x54, 0xFB, 0xFD, 0x7F, 0x46, 0x31, 0xFB, 0x7F, 0x02, 0x71, 0xDD,
++0x8F, 0x62, 0x90, 0x01, 0xC9, 0xE5, 0x62, 0xF0, 0xB4, 0x01, 0x02, 0x71, 0x55, 0x22, 0xE0, 0x5F,
++0xF0, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x7F, 0x10, 0xDF, 0xFE, 0xD0, 0xD0, 0x92, 0xAF,
++0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8A, 0xE0, 0xED, 0xF0, 0x90, 0x8A, 0xDF,
++0xEF, 0xF0, 0xD3, 0x94, 0x07, 0x50, 0x4E, 0xA3, 0xE0, 0x70, 0x1A, 0x90, 0x8A, 0xDF, 0xE0, 0xFF,
++0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x47,
++0xE0, 0x5F, 0xF0, 0x80, 0x17, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08, 0x80,
++0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xFF, 0x90, 0x00, 0x47, 0xE0, 0x4F, 0xF0, 0x51, 0x81, 0x90, 0x8A,
++0xDF, 0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0xFF,
++0x90, 0x00, 0x46, 0x80, 0x59, 0x90, 0x8A, 0xDF, 0xE0, 0x24, 0xF8, 0xF0, 0xA3, 0xE0, 0x70, 0x1D,
++0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC,
++0xC4, 0x54, 0xF0, 0xF4, 0xFF, 0x90, 0x00, 0x43, 0xE0, 0x5F, 0xF0, 0x80, 0x1A, 0x90, 0x8A, 0xDF,
++0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xC4, 0x54, 0xF0,
++0xFF, 0x90, 0x00, 0x43, 0xE0, 0x4F, 0xF0, 0x51, 0x81, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74, 0x01,
++0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x43, 0x51, 0x7E,
++0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, 0x00, 0x49, 0xE0, 0x90, 0x8B, 0x54, 0xF0, 0xE0, 0x54, 0x0F,
++0xF0, 0x44, 0xF0, 0xFD, 0x7F, 0x49, 0x31, 0xFB, 0x90, 0x8B, 0x54, 0xE0, 0x44, 0xB0, 0xFD, 0x7F,
++0x49, 0x21, 0xFB, 0x90, 0x8A, 0xDD, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0x75, 0x5E, 0x01, 0x8E, 0x5F,
++0xF5, 0x60, 0xE4, 0xFD, 0x7F, 0x0B, 0x51, 0x91, 0xE4, 0xFD, 0x7F, 0x02, 0x51, 0x91, 0x71, 0xC1,
++0xE4, 0xFF, 0x71, 0xB5, 0xE4, 0xF5, 0x62, 0x90, 0x01, 0xC9, 0xE5, 0x62, 0xF0, 0x90, 0x8A, 0xDD,
++0xE0, 0xFC, 0xA3, 0xE0, 0xFD, 0xEC, 0xFB, 0x8D, 0x44, 0xE4, 0xF5, 0x45, 0x7D, 0x01, 0x7F, 0x60,
++0x7E, 0x01, 0x02, 0x35, 0xAB, 0x90, 0x01, 0xCA, 0xE5, 0x61, 0xF0, 0xEF, 0x60, 0x02, 0x71, 0x55,
++0x22, 0x7F, 0x0B, 0x71, 0xDD, 0xEF, 0x65, 0x61, 0x60, 0x10, 0xE5, 0x61, 0xB4, 0x01, 0x05, 0xE4,
++0xF5, 0x61, 0x80, 0x03, 0x75, 0x61, 0x01, 0x7F, 0x01, 0x22, 0x7F, 0x00, 0x22, 0xD3, 0x10, 0xAF,
++0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8B, 0x57, 0xEF, 0xF0, 0xD3, 0x94, 0x07, 0x50, 0x43, 0xE0, 0xFF,
++0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x46,
++0x51, 0x7E, 0x90, 0x8B, 0x57, 0xE0, 0xFD, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x05, 0x08, 0x80, 0x05,
++0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0x90, 0x00, 0x44, 0xE0, 0xFB, 0xE4, 0xFE, 0xEF,
++0x5B, 0xA8, 0x05, 0x08, 0x80, 0x06, 0xCE, 0xA2, 0xE7, 0x13, 0xCE, 0x13, 0xD8, 0xF8, 0xFF, 0x80,
++0x4B, 0x90, 0x8B, 0x57, 0xE0, 0x24, 0xF8, 0xF0, 0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08, 0x80,
++0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0xFF, 0x90, 0x00, 0x43, 0xE0, 0x5F, 0xF0, 0x51, 0x81, 0x90,
++0x8B, 0x57, 0xE0, 0xFD, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x05, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE,
++0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0x90, 0x00, 0x42, 0xE0, 0xFB, 0xE4, 0xFE, 0xEF, 0x5B, 0xA8, 0x05,
++0x08, 0x80, 0x06, 0xCE, 0xA2, 0xE7, 0x13, 0xCE, 0x13, 0xD8, 0xF8, 0xFF, 0xD0, 0xD0, 0x92, 0xAF,
++0x22, 0xE4, 0x90, 0x8B, 0x04, 0xF0, 0x90, 0x00, 0x80, 0xE0, 0x44, 0x80, 0xFD, 0x7F, 0x80, 0x21,
++0xFB, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x8B, 0x90, 0x8A,
++0xDA, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x01, 0x12, 0x42, 0xC2, 0xFA, 0xE5, 0xF0, 0x24, 0x00, 0xFF,
++0xE4, 0x3A, 0xFE, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x01, 0xEE, 0x8F, 0xF0, 0x12,
++0x43, 0x19, 0x12, 0x29, 0xD9, 0xFF, 0x60, 0x2C, 0xB5, 0x5E, 0x16, 0x90, 0x8A, 0xDA, 0x12, 0x43,
++0x6B, 0x90, 0x00, 0x01, 0x12, 0x42, 0xC2, 0x65, 0x60, 0x70, 0x04, 0xE5, 0x5F, 0x65, 0xF0, 0x60,
++0x22, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x01, 0x12, 0x42, 0xC2, 0xFF, 0xAE, 0xF0,
++0x71, 0x73, 0x80, 0x0F, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x12, 0x29, 0xD9, 0x65, 0x5E, 0x60,
++0x02, 0xB1, 0x08, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xE4, 0xF5, 0x5E, 0x7F, 0x60, 0x7E, 0x01, 0x8F,
++0x82, 0x8E, 0x83, 0xA3, 0xA3, 0xA3, 0xE4, 0xF0, 0x22, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x8B, 0xEF,
++0x12, 0x43, 0x94, 0x55, 0x5A, 0x01, 0x55, 0x51, 0x02, 0x55, 0x7E, 0x03, 0x55, 0x87, 0x05, 0x55,
++0x90, 0x06, 0x55, 0xCB, 0x07, 0x55, 0x98, 0x08, 0x55, 0xA1, 0x09, 0x55, 0xA9, 0x20, 0x55, 0xB2,
++0x2C, 0x55, 0x63, 0x2D, 0x55, 0x6C, 0x2E, 0x55, 0x75, 0x3B, 0x55, 0xBB, 0x4B, 0x00, 0x00, 0x55,
++0xC4, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x72, 0xFC, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B,
++0x02, 0x73, 0x02, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x73, 0x2F, 0x90, 0x8A, 0xD7, 0x12,
++0x43, 0x6B, 0x02, 0x73, 0x77, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x73, 0xB0, 0x90, 0x8A,
++0xD7, 0x12, 0x43, 0x6B, 0x02, 0x73, 0xC9, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x72, 0xD0,
++0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0xE1, 0x19, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x74,
++0x11, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x81, 0x91, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02,
++0x76, 0xEA, 0x90, 0x8A, 0xD7, 0x12, 0x43, 0x6B, 0x02, 0x78, 0xDE, 0x90, 0x8A, 0xD7, 0x12, 0x43,
++0x6B, 0x02, 0x7A, 0x48, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x01, 0xF0, 0x22, 0xD3, 0x10, 0xAF, 0x01,
++0xC3, 0xC0, 0xD0, 0x90, 0x01, 0xCC, 0xE0, 0x54, 0x0F, 0x90, 0x8A, 0xCF, 0xF0, 0x90, 0x8A, 0xCF,
++0xE0, 0xFD, 0x70, 0x02, 0xE1, 0x14, 0x90, 0x8B, 0x51, 0xE0, 0xFF, 0x74, 0x01, 0x7E, 0x00, 0xA8,
++0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0xEF, 0x5D, 0x70, 0x02,
++0xE1, 0x0D, 0x90, 0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD0, 0x12, 0x43, 0x5F, 0xE0,
++0x90, 0x8A, 0xD0, 0xF0, 0x75, 0x1D, 0x01, 0x75, 0x1E, 0x8A, 0x75, 0x1F, 0xD0, 0x75, 0x20, 0x01,
++0x7B, 0x01, 0x7A, 0x8A, 0x79, 0xD1, 0x12, 0x5F, 0x57, 0x90, 0x8A, 0xD1, 0xE0, 0xFF, 0xC4, 0x13,
++0x13, 0x13, 0x54, 0x01, 0x90, 0x8B, 0x51, 0x30, 0xE0, 0x59, 0xE0, 0x75, 0xF0, 0x02, 0x90, 0x00,
++0x88, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD2, 0xF0, 0x90, 0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x02,
++0x90, 0x00, 0x89, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD3, 0xF0, 0x90, 0x8B, 0x51, 0xE0, 0x75,
++0xF0, 0x04, 0x90, 0x01, 0xD1, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD4, 0xF0, 0x90, 0x8B, 0x51,
++0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD2, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD5, 0xF0, 0x90,
++0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD3, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD6,
++0xF0, 0x80, 0x33, 0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD1, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A,
++0xD2, 0xF0, 0x90, 0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD2, 0x12, 0x43, 0x5F, 0xE0,
++0x90, 0x8A, 0xD3, 0xF0, 0x90, 0x8B, 0x51, 0xE0, 0x75, 0xF0, 0x04, 0x90, 0x01, 0xD3, 0x12, 0x43,
++0x5F, 0xE0, 0x90, 0x8A, 0xD4, 0xF0, 0xEF, 0x54, 0x7F, 0xFF, 0x7B, 0x01, 0x7A, 0x8A, 0x79, 0xD2,
++0xB1, 0x19, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x90, 0x8B, 0x51, 0xE0, 0xFE, 0x74, 0x01, 0xA8, 0x06,
++0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0xF4, 0x5F, 0x90, 0x8A, 0xCF, 0xF0, 0x90, 0x8B, 0x51,
++0xE0, 0xFF, 0x74, 0x01, 0xA8, 0x07, 0x08, 0x80, 0x02, 0xC3, 0x33, 0xD8, 0xFC, 0x90, 0x01, 0xCC,
++0xF0, 0x90, 0x8B, 0x51, 0xE0, 0x04, 0xF0, 0xE0, 0x54, 0x03, 0xF0, 0xA1, 0xDD, 0x90, 0x01, 0xC6,
++0xE0, 0x44, 0x02, 0xF0, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90, 0x00, 0x04, 0x12, 0x42, 0x20, 0xFF,
++0x54, 0x1F, 0xFE, 0xEF, 0x54, 0x20, 0xC4, 0x13, 0x54, 0x07, 0xFD, 0xAF, 0x06, 0x90, 0x8A, 0xDA,
++0xEF, 0xF0, 0xA3, 0xED, 0xF0, 0xA3, 0x12, 0x43, 0x8B, 0x90, 0x8A, 0xDC, 0x12, 0x43, 0x6B, 0x90,
++0x00, 0x03, 0x12, 0x42, 0x20, 0x54, 0xF0, 0xC4, 0x54, 0x0F, 0x90, 0x8A, 0xDF, 0xF0, 0x90, 0x00,
++0x04, 0x12, 0x42, 0x20, 0x54, 0x40, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x90, 0x8A, 0xE0, 0xF0, 0x90,
++0x8A, 0xDA, 0xE0, 0xFF, 0x75, 0xF0, 0x09, 0x90, 0x87, 0x25, 0x12, 0x43, 0x5F, 0xAD, 0x82, 0xAC,
++0x83, 0x90, 0x8A, 0xE1, 0xEC, 0xF0, 0xA3, 0xED, 0xF0, 0xEF, 0x75, 0xF0, 0x09, 0xA4, 0x24, 0x23,
++0xF9, 0x74, 0x87, 0x35, 0xF0, 0xFA, 0x7B, 0x01, 0xA3, 0x12, 0x43, 0x8B, 0x90, 0x8A, 0xDC, 0x12,
++0x43, 0x6B, 0x90, 0x00, 0x03, 0x12, 0x42, 0x20, 0x54, 0x0F, 0xFF, 0x90, 0x8A, 0xE3, 0x12, 0x43,
++0x6B, 0xEF, 0x12, 0x42, 0x4D, 0x90, 0x8A, 0xDC, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x02, 0x12, 0x42,
++0x20, 0xFF, 0x90, 0x8A, 0xE3, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x01, 0xEF, 0x12, 0x42, 0x5F, 0x90,
++0x8A, 0xDC, 0x12, 0x43, 0x6B, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0xFF, 0x90, 0x8A, 0xE1, 0xE0,
++0xFC, 0xA3, 0xE0, 0xFD, 0xF5, 0x82, 0x8C, 0x83, 0xEF, 0xF0, 0x12, 0x29, 0xD9, 0x8D, 0x82, 0x8C,
++0x83, 0xA3, 0xF0, 0x90, 0x8A, 0xDF, 0xE0, 0xFE, 0x90, 0x8A, 0xDA, 0xE0, 0xFF, 0x24, 0xC1, 0xF5,
++0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xEE, 0xF0, 0x90, 0x8A, 0xDB, 0xE0, 0xFE, 0x75, 0xF0, 0x09,
++0xEF, 0x90, 0x87, 0x29, 0x12, 0x43, 0x5F, 0xEE, 0xF0, 0x75, 0xF0, 0x09, 0xEF, 0x90, 0x87, 0x2A,
++0x12, 0x43, 0x5F, 0x74, 0x01, 0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0xFE, 0x75, 0xF0, 0x09, 0xEF, 0x90,
++0x87, 0x2B, 0x12, 0x43, 0x5F, 0xEE, 0xF0, 0x8F, 0x0F, 0xEF, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82,
++0xE4, 0x34, 0x89, 0xAF, 0x82, 0xF5, 0x10, 0x8F, 0x11, 0xE5, 0x0F, 0x75, 0xF0, 0x02, 0xA4, 0x24,
++0x81, 0xF9, 0x74, 0x86, 0x35, 0xF0, 0x75, 0x12, 0x01, 0xF5, 0x13, 0x89, 0x14, 0x75, 0xF0, 0x09,
++0xE5, 0x0F, 0x90, 0x87, 0x25, 0x12, 0x43, 0x5F, 0xAF, 0x82, 0x85, 0x83, 0x15, 0x8F, 0x16, 0xE5,
++0x0F, 0x75, 0xF0, 0x09, 0xA4, 0x24, 0x23, 0xF9, 0x74, 0x87, 0x35, 0xF0, 0x75, 0x17, 0x01, 0xF5,
++0x18, 0x89, 0x19, 0x74, 0xC1, 0x25, 0x0F, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0x12,
++0x43, 0x94, 0x58, 0xA7, 0x00, 0x58, 0xBC, 0x01, 0x58, 0xD1, 0x02, 0x58, 0xE6, 0x03, 0x59, 0x0F,
++0x04, 0x59, 0x24, 0x05, 0x59, 0x39, 0x06, 0x59, 0x5F, 0x0C, 0x59, 0x8C, 0x0D, 0x59, 0xB9, 0x0E,
++0x59, 0xE6, 0x0F, 0x00, 0x00, 0x5A, 0x1A, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4,
++0x34, 0x89, 0xF5, 0x83, 0x74, 0xF0, 0xF0, 0xA3, 0x74, 0x15, 0x80, 0x3C, 0xE5, 0x0F, 0x25, 0xE0,
++0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0x74, 0xF0, 0xF0, 0xA3, 0x74, 0x10, 0x80,
++0x27, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0x74, 0xF0,
++0xF0, 0xA3, 0x74, 0x05, 0x80, 0x12, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34,
++0x89, 0xF5, 0x83, 0x74, 0xF0, 0xF0, 0xA3, 0xE4, 0xF0, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81, 0xF5,
++0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0x74, 0x0F, 0xF0, 0xA3, 0x74, 0x8F, 0xF0, 0x41, 0x1A, 0xE5,
++0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0x74, 0x0F, 0xF0, 0xA3,
++0x74, 0xF5, 0x80, 0x27, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5,
++0x83, 0x74, 0x0F, 0xF0, 0xA3, 0x74, 0xF0, 0x80, 0x12, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5,
++0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE4, 0xF0, 0xA3, 0x74, 0x0D, 0xF0, 0xE5, 0x0F, 0x25, 0xE0,
++0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0x41, 0x1A, 0x90,
++0x04, 0x47, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x12, 0x42, 0x4D, 0x90, 0x04, 0x46, 0xE0,
++0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x01, 0x12, 0x42, 0x5F, 0x90, 0x04, 0x45, 0xE0,
++0x85, 0x11, 0x82, 0x85, 0x10, 0x83, 0xF0, 0x90, 0x04, 0x44, 0x41, 0x11, 0x90, 0x04, 0x4B, 0xE0,
++0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x12, 0x42, 0x4D, 0x90, 0x04, 0x4A, 0xE0, 0xAB, 0x12, 0xAA,
++0x13, 0xA9, 0x14, 0x90, 0x00, 0x01, 0x12, 0x42, 0x5F, 0x90, 0x04, 0x49, 0xE0, 0x85, 0x11, 0x82,
++0x85, 0x10, 0x83, 0xF0, 0x90, 0x04, 0x48, 0x80, 0x58, 0x90, 0x04, 0x4F, 0xE0, 0xAB, 0x12, 0xAA,
++0x13, 0xA9, 0x14, 0x12, 0x42, 0x4D, 0x90, 0x04, 0x4E, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14,
++0x90, 0x00, 0x01, 0x12, 0x42, 0x5F, 0x90, 0x04, 0x4D, 0xE0, 0x85, 0x11, 0x82, 0x85, 0x10, 0x83,
++0xF0, 0x90, 0x04, 0x4C, 0x80, 0x2B, 0x90, 0x04, 0x53, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14,
++0x12, 0x42, 0x4D, 0x90, 0x04, 0x52, 0xE0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x01,
++0x12, 0x42, 0x5F, 0x90, 0x04, 0x51, 0xE0, 0x85, 0x11, 0x82, 0x85, 0x10, 0x83, 0xF0, 0x90, 0x04,
++0x50, 0xE0, 0x85, 0x11, 0x82, 0x85, 0x10, 0x83, 0xA3, 0xF0, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14,
++0xC0, 0x03, 0xC0, 0x02, 0xC0, 0x01, 0x12, 0x29, 0xD9, 0xFF, 0xAB, 0x17, 0xAA, 0x18, 0xA9, 0x19,
++0x12, 0x29, 0xD9, 0x5F, 0xD0, 0x01, 0xD0, 0x02, 0xD0, 0x03, 0x12, 0x42, 0x4D, 0xAB, 0x12, 0xE5,
++0x14, 0x24, 0x01, 0xF9, 0xE4, 0x35, 0x13, 0xFA, 0xC0, 0x03, 0xC0, 0x02, 0xC0, 0x01, 0x12, 0x29,
++0xD9, 0xFF, 0xAB, 0x17, 0xAA, 0x18, 0xA9, 0x19, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0x5F, 0xD0,
++0x01, 0xD0, 0x02, 0xD0, 0x03, 0x12, 0x42, 0x4D, 0x85, 0x11, 0x82, 0x85, 0x10, 0x83, 0xC0, 0x83,
++0xC0, 0x82, 0xE0, 0xFF, 0x85, 0x16, 0x82, 0x85, 0x15, 0x83, 0xE0, 0xFE, 0xEF, 0x5E, 0xD0, 0x82,
++0xD0, 0x83, 0xF0, 0x85, 0x11, 0x82, 0x85, 0x10, 0x83, 0xA3, 0xC0, 0x83, 0xC0, 0x82, 0xE0, 0xFF,
++0x85, 0x16, 0x82, 0x85, 0x15, 0x83, 0xA3, 0xE0, 0xFE, 0xEF, 0x5E, 0xD0, 0x82, 0xD0, 0x83, 0xF0,
++0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0xFE, 0xA3,
++0xE0, 0x4E, 0x60, 0x4B, 0x90, 0x8A, 0xE6, 0x74, 0x0B, 0xF0, 0x90, 0x8A, 0xE6, 0xE0, 0xFF, 0xC3,
++0x94, 0x00, 0x50, 0x02, 0x61, 0x5F, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3,
++0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4,
++0x34, 0x86, 0xF5, 0x83, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x60, 0x0A, 0x90, 0x8A, 0xE6,
++0xE0, 0x24, 0x10, 0xA3, 0xF0, 0x80, 0x68, 0x90, 0x8A, 0xE6, 0xE0, 0x14, 0xF0, 0x80, 0xBB, 0xE5,
++0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFE, 0xA3, 0xE0,
++0x4E, 0x60, 0x47, 0x90, 0x8A, 0xE6, 0x74, 0x0F, 0xF0, 0x90, 0x8A, 0xE6, 0xE0, 0xFF, 0xC3, 0x94,
++0x00, 0x40, 0x3C, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33,
++0xCE, 0xD8, 0xF9, 0xFF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5,
++0x83, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x60, 0x08, 0x90, 0x8A, 0xE6, 0xE0, 0xA3, 0xF0,
++0x80, 0x0D, 0x90, 0x8A, 0xE6, 0xE0, 0x14, 0xF0, 0x80, 0xBF, 0xE4, 0x90, 0x8A, 0xE7, 0xF0, 0xE5,
++0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFE, 0xA3, 0xE0,
++0x4E, 0x60, 0x46, 0xE4, 0x90, 0x8A, 0xE6, 0xF0, 0x90, 0x8A, 0xE6, 0xE0, 0xFF, 0xC3, 0x94, 0x10,
++0x40, 0x02, 0x81, 0x18, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE,
++0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89,
++0xF5, 0x83, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x60, 0x06, 0x90, 0x8A, 0xE6, 0xE0, 0x80,
++0x63, 0x90, 0x8A, 0xE6, 0xE0, 0x04, 0xF0, 0x80, 0xBF, 0xE5, 0x0F, 0x25, 0xE0, 0x24, 0x81, 0xF5,
++0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0xFE, 0xA3, 0xE0, 0x4E, 0x60, 0x46, 0xE4, 0x90, 0x8A,
++0xE6, 0xF0, 0x90, 0x8A, 0xE6, 0xE0, 0xFF, 0xC3, 0x94, 0x0C, 0x50, 0x3C, 0x74, 0x01, 0x7E, 0x00,
++0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0xE5, 0x0F, 0x25,
++0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F,
++0x4E, 0x60, 0x08, 0x90, 0x8A, 0xE6, 0xE0, 0x24, 0x10, 0x80, 0x09, 0x90, 0x8A, 0xE6, 0xE0, 0x04,
++0xF0, 0x80, 0xBF, 0xE4, 0x90, 0x8A, 0xE8, 0xF0, 0x90, 0x8A, 0xE7, 0xE0, 0xFF, 0x75, 0xF0, 0x09,
++0xE5, 0x0F, 0x90, 0x87, 0x27, 0x12, 0x43, 0x5F, 0xEF, 0xF0, 0x90, 0x8A, 0xE8, 0xE0, 0xFE, 0x75,
++0xF0, 0x09, 0xE5, 0x0F, 0x90, 0x87, 0x28, 0x12, 0x43, 0x5F, 0xEE, 0xF0, 0xE5, 0x0F, 0xC3, 0x94,
++0x20, 0x50, 0x32, 0x74, 0x84, 0x25, 0x0F, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE0, 0xD3,
++0x9F, 0x40, 0x02, 0x80, 0x18, 0x74, 0x84, 0x25, 0x0F, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83,
++0xE0, 0xC3, 0x9E, 0x50, 0x08, 0x90, 0x8A, 0xE8, 0xE0, 0xA3, 0xF0, 0x80, 0x08, 0x90, 0x8A, 0xE7,
++0xE0, 0x90, 0x8A, 0xE9, 0xF0, 0x90, 0x8A, 0xE9, 0xE0, 0xFD, 0xAF, 0x0F, 0x91, 0xC1, 0x90, 0x8A,
++0xE9, 0xE0, 0xFF, 0x74, 0x84, 0x25, 0x0F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEF, 0xF0,
++0x90, 0x8A, 0xE7, 0xE0, 0xFF, 0xD3, 0x94, 0x13, 0x40, 0x07, 0x90, 0x87, 0x22, 0x74, 0x03, 0xF0,
++0x22, 0xEF, 0xD3, 0x94, 0x0B, 0x40, 0x07, 0x90, 0x87, 0x22, 0x74, 0x02, 0xF0, 0x22, 0xEF, 0xD3,
++0x94, 0x03, 0x40, 0x07, 0x90, 0x87, 0x22, 0x74, 0x01, 0xF0, 0x22, 0xE4, 0x90, 0x87, 0x22, 0xF0,
++0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x74, 0x84, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x04,
++0xF5, 0x83, 0xED, 0xF0, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xAC, 0x07, 0xED, 0x54, 0x1F, 0x90, 0x8A,
++0xC7, 0xF0, 0x74, 0x01, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0x90, 0x8A, 0xC5,
++0xF0, 0x90, 0x8A, 0xC8, 0x74, 0x01, 0xF0, 0xEB, 0xC3, 0x94, 0x01, 0x40, 0x02, 0x80, 0x37, 0x90,
++0x8A, 0xC5, 0xE0, 0x25, 0x0D, 0xFF, 0xA3, 0xF0, 0xA3, 0xE0, 0x90, 0x41, 0x9E, 0x93, 0xFE, 0xEF,
++0xD3, 0x9E, 0x40, 0x10, 0x74, 0x01, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE4, 0xF0,
++0xAF, 0x04, 0x80, 0x9D, 0x90, 0x8A, 0xC6, 0xE0, 0xFF, 0x74, 0x01, 0x2C, 0xF5, 0x82, 0xE4, 0x34,
++0x86, 0xF5, 0x83, 0xEF, 0xF0, 0x22, 0xAD, 0x07, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x27, 0x12,
++0x43, 0x5F, 0xE0, 0xFF, 0x90, 0x8A, 0xCA, 0xF0, 0x74, 0xA5, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x8A,
++0xF5, 0x83, 0xE0, 0x54, 0x1F, 0x90, 0x8A, 0xC9, 0xF0, 0xD3, 0x9F, 0x40, 0x06, 0xA3, 0xE0, 0x90,
++0x8A, 0xC9, 0xF0, 0x90, 0x8A, 0xC9, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0x66, 0xF5, 0x82, 0xE4, 0x34,
++0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xEF, 0x25, 0xE0, 0x24, 0x2E, 0xF5,
++0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0x74, 0x01, 0x93, 0x2B, 0xFF, 0xE4, 0x93, 0x3A, 0xC3, 0x13,
++0xFE, 0xEF, 0x13, 0xFF, 0xED, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83,
++0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0xAF, 0x05, 0x90, 0x8A, 0xC9, 0xE0, 0xFD, 0x91, 0xC1, 0x90, 0x8A,
++0xC9, 0xE0, 0xFF, 0x22, 0xAC, 0x07, 0x74, 0x84, 0x2C, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83,
++0xE0, 0x54, 0x7F, 0x90, 0x8A, 0xDE, 0xF0, 0xE0, 0x54, 0x1F, 0xFF, 0x90, 0x8A, 0xE1, 0xF0, 0x75,
++0xF0, 0x09, 0xEC, 0x90, 0x87, 0x28, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xE3, 0xF0, 0x75, 0xF0,
++0x09, 0xEC, 0x90, 0x87, 0x27, 0x12, 0x43, 0x5F, 0xE0, 0xFE, 0x90, 0x8A, 0xE4, 0xF0, 0xEC, 0x25,
++0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFB, 0xA3, 0xE0, 0x90, 0x8A,
++0xE5, 0xCB, 0xF0, 0xA3, 0xEB, 0xF0, 0xEC, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34, 0x86,
++0xF5, 0x83, 0xE0, 0xFB, 0xA3, 0xE0, 0x90, 0x8A, 0xE7, 0xCB, 0xF0, 0xA3, 0xEB, 0xF0, 0xEF, 0xD3,
++0x9E, 0x40, 0x0C, 0x90, 0x8A, 0xE4, 0xE0, 0x90, 0x8A, 0xE1, 0xF0, 0x90, 0x8A, 0xDE, 0xF0, 0xED,
++0x70, 0x02, 0xE1, 0x06, 0x90, 0x8A, 0xE2, 0xED, 0xF0, 0x90, 0x8A, 0xDE, 0xE0, 0x30, 0xE6, 0x0E,
++0x90, 0x8A, 0xE1, 0xE0, 0x90, 0x8A, 0xDE, 0xF0, 0x90, 0x8A, 0xE2, 0xE0, 0x14, 0xF0, 0x90, 0x8A,
++0xE2, 0xE0, 0x70, 0x02, 0xE1, 0x06, 0x90, 0x8A, 0xE1, 0xE0, 0xFF, 0xD3, 0x94, 0x00, 0x50, 0x02,
++0xE1, 0x06, 0xE4, 0x90, 0x8A, 0xE0, 0xF0, 0xEF, 0x14, 0x90, 0x8A, 0xDF, 0xF0, 0x90, 0x8A, 0xE3,
++0xE0, 0xFD, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0xD3, 0x9D, 0x40, 0x6F, 0xEF, 0x94, 0x10, 0x40, 0x21,
++0xEF, 0x24, 0xF0, 0xFF, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE,
++0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0x90, 0x8A, 0xE7, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x70,
++0x27, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0xC3, 0x94, 0x10, 0x50, 0x37, 0x74, 0x01, 0x7E, 0x00, 0xA8,
++0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0x90, 0x8A, 0xE5, 0xE0,
++0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x60, 0x1A, 0x90, 0x8A, 0xDF, 0xE0, 0x90, 0x8A, 0xDE, 0xF0,
++0x90, 0x8A, 0xE0, 0xE0, 0x04, 0xF0, 0x90, 0x8A, 0xE2, 0xE0, 0xFF, 0x90, 0x8A, 0xE0, 0xE0, 0x6F,
++0x60, 0x08, 0x90, 0x8A, 0xDF, 0xE0, 0x14, 0xF0, 0x80, 0x83, 0x90, 0x8A, 0xE2, 0xE0, 0xFF, 0x90,
++0x8A, 0xE0, 0xE0, 0xC3, 0x9F, 0x50, 0x0F, 0x90, 0x8A, 0xDF, 0xE0, 0xB5, 0x05, 0x08, 0x90, 0x8A,
++0xE3, 0xE0, 0x90, 0x8A, 0xDE, 0xF0, 0x90, 0x8A, 0xDE, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0x66, 0xF5,
++0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xEF, 0x25, 0xE0,
++0x24, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0x74, 0x01, 0x93, 0x2B, 0xFF, 0xE4, 0x93,
++0x3A, 0xC3, 0x13, 0xFE, 0xEF, 0x13, 0xFF, 0xEC, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34,
++0x86, 0xF5, 0x83, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0xAF, 0x04, 0x90, 0x8A, 0xDE, 0xE0, 0xFD, 0x91,
++0xC1, 0x90, 0x8A, 0xDE, 0xE0, 0xFF, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x8B, 0x1A,
++0x8A, 0x1B, 0x89, 0x1C, 0x90, 0x8B, 0x3F, 0x12, 0x43, 0x8B, 0xAB, 0x1D, 0xAA, 0x1E, 0xA9, 0x1F,
++0x90, 0x8B, 0x42, 0x12, 0x43, 0x8B, 0xAF, 0x20, 0x15, 0x20, 0xEF, 0x60, 0x1E, 0x90, 0x8B, 0x42,
++0xE4, 0x75, 0xF0, 0x01, 0x12, 0x43, 0x74, 0x12, 0x29, 0xD9, 0xFF, 0x90, 0x8B, 0x3F, 0xE4, 0x75,
++0xF0, 0x01, 0x12, 0x43, 0x74, 0xEF, 0x12, 0x42, 0x4D, 0x80, 0xDB, 0xAB, 0x1A, 0xAA, 0x1B, 0xA9,
++0x1C, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x01, 0xC4,
++0x74, 0xA6, 0xF0, 0x74, 0x5F, 0xA3, 0xF0, 0x90, 0x04, 0x1D, 0xE0, 0x60, 0x1A, 0x90, 0x05, 0x22,
++0xE0, 0x54, 0x90, 0x60, 0x07, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x40, 0xF0, 0x90, 0x01, 0xC7, 0xE0,
++0x30, 0xE1, 0xE4, 0x7F, 0x00, 0x80, 0x02, 0x7F, 0x01, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xD3, 0x10,
++0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0xE4, 0xFB, 0xFA, 0xEF, 0x30, 0xE0, 0x02, 0x7B, 0x80, 0xEF, 0xC3,
++0x13, 0x90, 0xFD, 0x10, 0xF0, 0x90, 0x04, 0x25, 0xEF, 0xF0, 0xED, 0x60, 0x1E, 0xAF, 0x03, 0x74,
++0x0F, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x80, 0xF0, 0x74, 0x10, 0x2F,
++0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x44, 0x80, 0xF0, 0xAF, 0x03, 0x74, 0x08, 0x2F,
++0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE4, 0xF0, 0x74, 0x09, 0x2F, 0xF5, 0x82, 0xE4, 0x34,
++0xFC, 0xF5, 0x83, 0xE0, 0x54, 0xF0, 0xF0, 0x74, 0x21, 0x2B, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5,
++0x83, 0xE0, 0x54, 0xF7, 0xF0, 0xAE, 0x02, 0xAF, 0x03, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xD3, 0x10,
++0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0xE4, 0xFD, 0xFC, 0xEF, 0x30, 0xE0, 0x02, 0x7D, 0x80, 0xEF, 0xC3,
++0x13, 0x90, 0xFD, 0x10, 0xF0, 0xAE, 0x04, 0xAF, 0x05, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x12, 0x5F,
++0xA6, 0xBF, 0x01, 0x10, 0x90, 0x02, 0x09, 0xE0, 0xFF, 0x7D, 0x01, 0x12, 0x5F, 0xDE, 0x90, 0x04,
++0x1F, 0x74, 0x20, 0xF0, 0x22, 0x90, 0x01, 0x02, 0xE0, 0x54, 0x03, 0xFF, 0xE0, 0x54, 0x0C, 0x13,
++0x13, 0x54, 0x3F, 0xFE, 0xEF, 0x64, 0x01, 0x60, 0x04, 0xEF, 0xB4, 0x03, 0x0E, 0x90, 0x8A, 0xC5,
++0x74, 0x01, 0xF0, 0xA3, 0x74, 0x37, 0xF0, 0x79, 0x01, 0x80, 0x18, 0xEE, 0x64, 0x01, 0x60, 0x07,
++0xAF, 0x06, 0xEE, 0x64, 0x03, 0x70, 0x3B, 0x90, 0x8A, 0xC5, 0x74, 0x01, 0xF0, 0xA3, 0x74, 0x3D,
++0xF0, 0x79, 0x40, 0x90, 0x8A, 0xC5, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0xF5, 0x82, 0x8E, 0x83, 0xE0,
++0x59, 0x60, 0x08, 0xE9, 0xF0, 0xE4, 0x90, 0x8A, 0xF6, 0xF0, 0x22, 0x90, 0x8A, 0xF6, 0xE0, 0x04,
++0xF0, 0xE0, 0xC3, 0x94, 0x0A, 0x40, 0x0B, 0xE4, 0xF0, 0x90, 0x04, 0x19, 0xE0, 0x30, 0xE0, 0x02,
++0x11, 0x6E, 0x22, 0xC0, 0xE0, 0xC0, 0xF0, 0xC0, 0x83, 0xC0, 0x82, 0xC0, 0xD0, 0x75, 0xD0, 0x00,
++0xC0, 0x00, 0xC0, 0x01, 0xC0, 0x02, 0xC0, 0x03, 0xC0, 0x04, 0xC0, 0x05, 0xC0, 0x06, 0xC0, 0x07,
++0x90, 0x01, 0xC4, 0x74, 0xF3, 0xF0, 0x74, 0x60, 0xA3, 0xF0, 0x90, 0x01, 0x34, 0xE0, 0x55, 0x28,
++0xF5, 0x2C, 0xA3, 0xE0, 0x55, 0x29, 0xF5, 0x2D, 0xA3, 0xE0, 0x55, 0x2A, 0xF5, 0x2E, 0xA3, 0xE0,
++0x55, 0x2B, 0xF5, 0x2F, 0xE5, 0x2C, 0x20, 0xE0, 0x02, 0x41, 0x8A, 0x90, 0x01, 0x34, 0x74, 0x01,
++0xF0, 0x85, 0xD1, 0x4D, 0x85, 0xD2, 0x4E, 0x85, 0xD3, 0x4F, 0x85, 0xD4, 0x50, 0x85, 0xD5, 0x51,
++0x85, 0xD6, 0x52, 0x85, 0xD7, 0x53, 0x85, 0xD9, 0x54, 0xE5, 0x54, 0x54, 0x40, 0xC3, 0x13, 0xFF,
++0xE5, 0x53, 0x54, 0x20, 0x6F, 0x70, 0x02, 0x41, 0x47, 0xE5, 0x54, 0x30, 0xE5, 0x02, 0x41, 0x47,
++0xE5, 0x52, 0x54, 0x1F, 0xF5, 0x08, 0xE5, 0x4D, 0x54, 0x3F, 0xF5, 0x09, 0xE5, 0x51, 0x54, 0x1F,
++0xFF, 0xE5, 0x08, 0x25, 0xE0, 0x24, 0xE3, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE4, 0x8F,
++0xF0, 0x12, 0x42, 0x81, 0xE5, 0x53, 0x54, 0x1F, 0xFF, 0xE5, 0x08, 0x25, 0xE0, 0x24, 0xC0, 0xF5,
++0x82, 0xE4, 0x34, 0x85, 0xF5, 0x83, 0xE4, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xE5, 0x09, 0xD3, 0x94,
++0x04, 0x40, 0x03, 0x75, 0x09, 0x04, 0x75, 0xF0, 0x0A, 0xE5, 0x08, 0x90, 0x84, 0x00, 0x12, 0x43,
++0x5F, 0x75, 0xF0, 0x02, 0xE5, 0x09, 0x12, 0x43, 0x5F, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0xE5, 0x53,
++0x54, 0x1F, 0x2F, 0xFF, 0xE4, 0x3E, 0xFE, 0x75, 0xF0, 0x0A, 0xE5, 0x08, 0x90, 0x84, 0x00, 0x12,
++0x43, 0x5F, 0x75, 0xF0, 0x02, 0xE5, 0x09, 0x12, 0x43, 0x5F, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0xE5,
++0x54, 0x20, 0xE6, 0x24, 0xE5, 0x53, 0x54, 0x1F, 0xFF, 0xE5, 0x08, 0x25, 0xE0, 0x24, 0x63, 0xF5,
++0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE4, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xE5, 0x4F, 0x30, 0xE7,
++0x36, 0xAF, 0x08, 0x12, 0x5D, 0x36, 0x80, 0x2F, 0xE5, 0x53, 0x54, 0x1F, 0xFF, 0xE5, 0x08, 0x25,
++0xE0, 0x24, 0xA3, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE4, 0x8F, 0xF0, 0x12, 0x42, 0x81,
++0xE5, 0x4F, 0x30, 0xE7, 0x12, 0xE5, 0x4F, 0x54, 0x7F, 0xFD, 0xE5, 0x53, 0x54, 0x1F, 0xF5, 0x0D,
++0xAB, 0x09, 0xAF, 0x08, 0x12, 0x5C, 0xD9, 0xE5, 0x24, 0x14, 0x24, 0xFD, 0x50, 0x02, 0x80, 0x3A,
++0x90, 0x8B, 0x1A, 0xE0, 0x60, 0x2B, 0x90, 0x01, 0x5B, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x04,
++0xF0, 0x12, 0x4B, 0x34, 0xEF, 0x64, 0x01, 0x70, 0x21, 0x90, 0x8B, 0x3D, 0x12, 0x4B, 0x5C, 0x90,
++0x01, 0x5B, 0x74, 0x05, 0xF0, 0x90, 0x06, 0x92, 0x74, 0x01, 0xF0, 0x90, 0x8B, 0x18, 0xF0, 0x80,
++0x09, 0x12, 0x4B, 0x34, 0xBF, 0x01, 0x03, 0x12, 0x4A, 0xFC, 0xE5, 0x2C, 0x30, 0xE1, 0x20, 0x90,
++0x01, 0x34, 0x74, 0x02, 0xF0, 0x85, 0xD1, 0x56, 0x85, 0xD2, 0x57, 0x85, 0xD3, 0x58, 0x85, 0xD4,
++0x59, 0x85, 0xD5, 0x5A, 0x85, 0xD6, 0x5B, 0x85, 0xD7, 0x5C, 0x85, 0xD9, 0x5D, 0xB1, 0x5F, 0xE5,
++0x2C, 0x30, 0xE3, 0x06, 0x90, 0x01, 0x34, 0x74, 0x08, 0xF0, 0xE5, 0x2C, 0x30, 0xE4, 0x09, 0x90,
++0x01, 0x34, 0x74, 0x10, 0xF0, 0x43, 0x55, 0x10, 0xE5, 0x2C, 0x30, 0xE5, 0x26, 0x90, 0x01, 0xCF,
++0xE0, 0x30, 0xE5, 0x1F, 0xE0, 0x54, 0xDF, 0xF0, 0x90, 0x01, 0x34, 0x74, 0x20, 0xF0, 0x75, 0xA8,
++0x00, 0x75, 0xE8, 0x00, 0x12, 0x52, 0x10, 0x90, 0x00, 0x03, 0xE0, 0x54, 0xFB, 0xF0, 0x12, 0x52,
++0x81, 0x80, 0xFE, 0xE5, 0x2C, 0x30, 0xE6, 0x2D, 0x90, 0x01, 0x34, 0x74, 0x40, 0xF0, 0x90, 0x8B,
++0x32, 0xE0, 0x30, 0xE0, 0x0C, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x05, 0x90, 0x8B, 0x34, 0xE4,
++0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0xFF, 0x30, 0xE0, 0x0C, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x05,
++0x90, 0x8B, 0x2E, 0xE4, 0xF0, 0xE5, 0x2E, 0x20, 0xE0, 0x02, 0x61, 0xE7, 0x90, 0x8B, 0x08, 0x74,
++0x01, 0xF0, 0x90, 0x01, 0x36, 0xF0, 0x90, 0x8B, 0x06, 0xE0, 0x60, 0x0F, 0xE4, 0xF0, 0x90, 0x05,
++0x53, 0xE0, 0x44, 0x02, 0xF0, 0x90, 0x05, 0xFC, 0xE0, 0x04, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0x30,
++0xE0, 0x2F, 0x90, 0x8B, 0x37, 0x74, 0x01, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0xFF, 0x13, 0x13, 0x54,
++0x3F, 0x30, 0xE0, 0x1D, 0x90, 0x8B, 0x34, 0x74, 0x01, 0xF0, 0xB1, 0x39, 0x90, 0x8B, 0x33, 0xE0,
++0x64, 0x03, 0x60, 0x0D, 0x7F, 0x01, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x05, 0x7F, 0x04, 0x12, 0x4E,
++0x89, 0x90, 0x8B, 0x2C, 0xE0, 0xFF, 0x30, 0xE0, 0x56, 0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x4F,
++0x90, 0x8B, 0x2E, 0x74, 0x01, 0xF0, 0xB1, 0x39, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x3F,
++0xB1, 0xF0, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x90, 0x8B, 0x2D, 0xE0, 0xFF, 0x64, 0x06, 0x60,
++0x2E, 0xEF, 0xB4, 0x04, 0x02, 0x80, 0x07, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x04, 0xE4, 0xFF,
++0x80, 0x14, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x03, 0x04, 0x7F, 0x01, 0x80, 0x09, 0x90, 0x8B, 0x2D,
++0xE0, 0xB4, 0x02, 0x05, 0x7F, 0x01, 0x12, 0x7B, 0x49, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x12,
++0x43, 0xE7, 0x90, 0x8B, 0x08, 0xE4, 0xF0, 0xE5, 0x2E, 0x30, 0xE1, 0x2F, 0x90, 0x01, 0x36, 0x74,
++0x02, 0xF0, 0x43, 0x55, 0x40, 0x11, 0x85, 0x90, 0x8B, 0x37, 0xE0, 0xB4, 0x01, 0x09, 0x90, 0x05,
++0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x37, 0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x0D, 0xE4, 0xFF,
++0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x05, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0xE5, 0x2E, 0x30, 0xE2, 0x16,
++0x90, 0x01, 0x36, 0x74, 0x04, 0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x06, 0xA3, 0xE0, 0x64,
++0x06, 0x60, 0x03, 0x12, 0x46, 0xB3, 0xE5, 0x2E, 0x30, 0xE3, 0x38, 0x90, 0x01, 0x36, 0x74, 0x08,
++0xF0, 0xE5, 0x21, 0x64, 0x01, 0x70, 0x2C, 0xE5, 0x24, 0x60, 0x28, 0x90, 0x01, 0x57, 0xE4, 0xF0,
++0x90, 0x01, 0x3C, 0x74, 0x02, 0xF0, 0x90, 0x8B, 0x3D, 0xE4, 0xF0, 0x90, 0x8B, 0x11, 0xE0, 0x90,
++0x8B, 0x3E, 0xF0, 0xE4, 0xFB, 0xFD, 0x7F, 0x54, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x57,
++0x74, 0x05, 0xF0, 0xE5, 0x2E, 0x30, 0xE4, 0x2B, 0x90, 0x01, 0x36, 0x74, 0x10, 0xF0, 0xE5, 0x21,
++0xB4, 0x01, 0x20, 0xE5, 0x24, 0x60, 0x1C, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74,
++0x02, 0xF0, 0x90, 0x8B, 0x1B, 0xE4, 0xF0, 0x53, 0x25, 0xFD, 0xE5, 0x25, 0x54, 0x07, 0x70, 0x03,
++0x12, 0x4A, 0xFC, 0xE5, 0x2E, 0x30, 0xE5, 0x1F, 0x90, 0x01, 0x36, 0x74, 0x20, 0xF0, 0xE5, 0x21,
++0xB4, 0x01, 0x14, 0xE5, 0x24, 0x60, 0x10, 0x90, 0x8B, 0x1A, 0xE0, 0x64, 0x02, 0x60, 0x05, 0x12,
++0x4A, 0x97, 0x80, 0x03, 0x12, 0x49, 0x49, 0xE5, 0x2E, 0x30, 0xE6, 0x1B, 0x90, 0x01, 0x36, 0x74,
++0x40, 0xF0, 0xE5, 0x21, 0xB4, 0x01, 0x10, 0xE5, 0x24, 0x60, 0x0C, 0x53, 0x25, 0xFE, 0xE5, 0x25,
++0x54, 0x07, 0x70, 0x03, 0x12, 0x4A, 0xFC, 0xE5, 0x2F, 0x30, 0xE1, 0x27, 0x90, 0x01, 0x37, 0x74,
++0x02, 0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0x30, 0xE0, 0x17, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x60,
++0x07, 0x12, 0x48, 0xFE, 0xD1, 0x20, 0x80, 0x0B, 0x90, 0x8B, 0x31, 0x74, 0x01, 0xF0, 0x80, 0x03,
++0x12, 0x48, 0xFE, 0x74, 0xF3, 0x04, 0x90, 0x01, 0xC4, 0xF0, 0x74, 0x60, 0xA3, 0xF0, 0xD0, 0x07,
++0xD0, 0x06, 0xD0, 0x05, 0xD0, 0x04, 0xD0, 0x03, 0xD0, 0x02, 0xD0, 0x01, 0xD0, 0x00, 0xD0, 0xD0,
++0xD0, 0x82, 0xD0, 0x83, 0xD0, 0xF0, 0xD0, 0xE0, 0x32, 0xE4, 0x90, 0x8B, 0x3D, 0xF0, 0x90, 0x05,
++0x58, 0xE0, 0xFF, 0x90, 0x8B, 0x38, 0xE0, 0x2F, 0x24, 0xFE, 0x90, 0x8B, 0x3E, 0xF0, 0xE4, 0xFB,
++0xFD, 0x7F, 0x50, 0x7E, 0x01, 0x12, 0x4B, 0x6C, 0x90, 0x01, 0x53, 0x74, 0x05, 0xF0, 0x22, 0x90,
++0x8A, 0xC5, 0xE0, 0x54, 0xF0, 0x44, 0x03, 0xF0, 0x54, 0x0F, 0x44, 0x80, 0xF0, 0x7B, 0x00, 0x7A,
++0x00, 0x79, 0x56, 0x90, 0x8B, 0x48, 0x12, 0x43, 0x8B, 0x0B, 0x7A, 0x8A, 0x79, 0xC5, 0xD3, 0x10,
++0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8B, 0x45, 0x12, 0x43, 0x8B, 0x90, 0x8B, 0x53, 0xE0, 0xFF,
++0x04, 0xF0, 0x90, 0x00, 0x01, 0xEF, 0x12, 0x42, 0x5F, 0x7F, 0xAF, 0x7E, 0x01, 0xD1, 0x8A, 0xEF,
++0x60, 0x49, 0x90, 0x8B, 0x45, 0x12, 0x43, 0x6B, 0x8B, 0x1D, 0x8A, 0x1E, 0x89, 0x1F, 0x75, 0x20,
++0x02, 0x7B, 0x01, 0x7A, 0x01, 0x79, 0xA0, 0x12, 0x5F, 0x57, 0x90, 0x8B, 0x48, 0x12, 0x43, 0x6B,
++0x8B, 0x1D, 0x8A, 0x1E, 0x89, 0x1F, 0x90, 0x8B, 0x45, 0x12, 0x43, 0x6B, 0x12, 0x29, 0xD9, 0xFF,
++0xC4, 0x54, 0x0F, 0xF5, 0x20, 0x7B, 0x01, 0x7A, 0x01, 0x79, 0xA2, 0x12, 0x5F, 0x57, 0x90, 0x01,
++0xAF, 0x74, 0xFF, 0xF0, 0x90, 0x01, 0xCB, 0xE0, 0x64, 0x80, 0xF0, 0xD0, 0xD0, 0x92, 0xAF, 0x22,
++0x90, 0x8B, 0x2C, 0xE0, 0xFF, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x30, 0xE0, 0x0B, 0xA3, 0xE0, 0x64,
++0x06, 0x60, 0x05, 0x7F, 0x06, 0x12, 0x7B, 0x49, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x06, 0x60, 0x02,
++0xD1, 0x13, 0x22, 0x90, 0x8B, 0x31, 0xE0, 0xB4, 0x01, 0x05, 0xE4, 0xF0, 0x12, 0x48, 0xFE, 0x22,
++0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x06, 0x60, 0x3C, 0xE5, 0x22, 0x54, 0x0F, 0x14, 0x60, 0x2E, 0x14,
++0x60, 0x1E, 0x24, 0xFE, 0x60, 0x0E, 0x24, 0xF8, 0x70, 0x2A, 0xE4, 0x90, 0x8B, 0x2D, 0xF0, 0x90,
++0x05, 0x22, 0xF0, 0x22, 0x90, 0x8B, 0x2D, 0x74, 0x01, 0xF0, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x22,
++0x90, 0x8B, 0x2D, 0x74, 0x03, 0xF0, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x22, 0x90, 0x01, 0xC6,
++0xE0, 0x44, 0x08, 0xF0, 0x22, 0xAE, 0x07, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF, 0x60, 0x18, 0x90,
++0x8B, 0x2C, 0xE0, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x20, 0xE0, 0x0C, 0xAF, 0x06, 0x7D, 0x01, 0x12,
++0x45, 0xA2, 0xD1, 0x20, 0x7F, 0x01, 0x22, 0x7F, 0x00, 0x22, 0x90, 0x8B, 0x4B, 0xEE, 0xF0, 0xA3,
++0xEF, 0xF0, 0xE4, 0xA3, 0xF0, 0xA3, 0xF0, 0x90, 0x8B, 0x4B, 0xE0, 0xFE, 0xA3, 0xE0, 0xF5, 0x82,
++0x8E, 0x83, 0xE0, 0x60, 0x2C, 0xC3, 0x90, 0x8B, 0x4E, 0xE0, 0x94, 0xE8, 0x90, 0x8B, 0x4D, 0xE0,
++0x94, 0x03, 0x40, 0x0A, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x10, 0xF0, 0x7F, 0x00, 0x22, 0x90, 0x8B,
++0x4D, 0xE4, 0x75, 0xF0, 0x01, 0x12, 0x42, 0x81, 0x7F, 0x0A, 0x7E, 0x00, 0x12, 0x37, 0x54, 0x80,
++0xC6, 0x7F, 0x01, 0x22, 0x75, 0x28, 0x33, 0xE4, 0xF5, 0x29, 0x75, 0x2A, 0x07, 0xF5, 0x2B, 0x90,
++0x01, 0x30, 0xE5, 0x28, 0xF0, 0xA3, 0xE5, 0x29, 0xF0, 0xA3, 0xE5, 0x2A, 0xF0, 0xA3, 0xE5, 0x2B,
++0xF0, 0x22, 0x75, 0x30, 0x1F, 0x75, 0x31, 0x01, 0x43, 0x31, 0x10, 0xE4, 0xF5, 0x32, 0x90, 0x01,
++0x38, 0xE5, 0x30, 0xF0, 0xA3, 0xE5, 0x31, 0xF0, 0xA3, 0xE5, 0x32, 0xF0, 0x22, 0x22, 0x90, 0x00,
++0x02, 0xE0, 0x54, 0xE0, 0x7F, 0x01, 0x60, 0x02, 0x7F, 0x00, 0x22, 0x90, 0x00, 0xF3, 0xE0, 0x7F,
++0x00, 0x30, 0xE3, 0x02, 0x7F, 0x01, 0x22, 0x90, 0x8B, 0x09, 0xE0, 0xB4, 0x01, 0x0C, 0x90, 0x00,
++0xF2, 0xE0, 0x30, 0xE7, 0x05, 0x7E, 0xFD, 0x7F, 0x33, 0x22, 0x7E, 0xFD, 0x7F, 0x2F, 0x22, 0x90,
++0x00, 0xF3, 0xE0, 0x30, 0xE2, 0x0D, 0x90, 0x05, 0x41, 0x74, 0x10, 0xF0, 0x90, 0x05, 0x5A, 0xF0,
++0xA3, 0xE4, 0xF0, 0x22, 0x90, 0x01, 0x64, 0x74, 0xA0, 0xF0, 0x22, 0xC0, 0xE0, 0xC0, 0x83, 0xC0,
++0x82, 0xC0, 0xD0, 0x75, 0xD0, 0x00, 0xC0, 0x05, 0xC0, 0x06, 0xC0, 0x07, 0x7D, 0x5B, 0x90, 0x01,
++0xC4, 0xED, 0xF0, 0x74, 0x67, 0xFF, 0xA3, 0xF0, 0x53, 0x91, 0xEF, 0x90, 0x00, 0x51, 0xE0, 0xFE,
++0x90, 0x00, 0x55, 0xE0, 0x5E, 0xF5, 0x3D, 0x90, 0x00, 0x52, 0xE0, 0xFE, 0x90, 0x00, 0x56, 0xE0,
++0x5E, 0xF5, 0x3E, 0xE5, 0x3D, 0x30, 0xE4, 0x06, 0x90, 0x00, 0x55, 0x74, 0x10, 0xF0, 0xE5, 0x3D,
++0x30, 0xE5, 0x06, 0x90, 0x00, 0x55, 0x74, 0x20, 0xF0, 0xE5, 0x3D, 0x30, 0xE6, 0x06, 0x90, 0x00,
++0x55, 0x74, 0x40, 0xF0, 0xE5, 0x3D, 0x30, 0xE7, 0x06, 0x90, 0x00, 0x55, 0x74, 0x80, 0xF0, 0xE5,
++0x3E, 0x30, 0xE0, 0x06, 0x90, 0x00, 0x56, 0x74, 0x01, 0xF0, 0xE5, 0x3E, 0x30, 0xE1, 0x06, 0x90,
++0x00, 0x56, 0x74, 0x02, 0xF0, 0xE5, 0x3E, 0x30, 0xE2, 0x06, 0x90, 0x00, 0x56, 0x74, 0x04, 0xF0,
++0xE5, 0x3E, 0x30, 0xE3, 0x06, 0x90, 0x00, 0x56, 0x74, 0x08, 0xF0, 0x90, 0x01, 0xC4, 0xED, 0xF0,
++0xA3, 0xEF, 0xF0, 0xD0, 0x07, 0xD0, 0x06, 0xD0, 0x05, 0xD0, 0xD0, 0xD0, 0x82, 0xD0, 0x83, 0xD0,
++0xE0, 0x32, 0xEF, 0xC3, 0x94, 0x20, 0x50, 0x39, 0xEF, 0x30, 0xE0, 0x17, 0xED, 0xC4, 0x54, 0xF0,
++0xFD, 0xEF, 0xC3, 0x13, 0xFE, 0x24, 0xA4, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE0, 0x54,
++0x0F, 0x80, 0x10, 0xEF, 0xC3, 0x13, 0xFE, 0x24, 0xA4, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83,
++0xE0, 0x54, 0xF0, 0xF0, 0x74, 0xA4, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE0, 0x4D,
++0xF0, 0x22, 0xE4, 0x90, 0x8A, 0xCF, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0xC3, 0x94, 0x20, 0x40,
++0x02, 0xC1, 0xCD, 0x75, 0xF0, 0x09, 0xEF, 0x90, 0x87, 0x2A, 0x12, 0x43, 0x5F, 0xE0, 0x64, 0x01,
++0x60, 0x02, 0xC1, 0xC5, 0x90, 0x8A, 0xCF, 0xE0, 0x25, 0xE0, 0x24, 0xC0, 0xF5, 0x82, 0xE4, 0x34,
++0x85, 0xF5, 0x83, 0xE0, 0xFC, 0xA3, 0xE0, 0xD3, 0x94, 0x00, 0xEC, 0x94, 0x00, 0x50, 0x02, 0xC1,
++0xC5, 0xEF, 0x75, 0xF0, 0x0A, 0xA4, 0x24, 0x00, 0xF9, 0x74, 0x84, 0x35, 0xF0, 0x75, 0x12, 0x01,
++0xF5, 0x13, 0x89, 0x14, 0x90, 0x8A, 0xCF, 0xE0, 0x25, 0xE0, 0x24, 0xC0, 0xF5, 0x82, 0xE4, 0x34,
++0x85, 0xF5, 0x83, 0xE0, 0xFD, 0xA3, 0xE0, 0x90, 0x8A, 0xD4, 0xCD, 0xF0, 0xA3, 0xED, 0xF0, 0xEF,
++0x25, 0xE0, 0x24, 0x63, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE0, 0xFF, 0xA3, 0xE0, 0x90,
++0x8A, 0xD6, 0xCF, 0xF0, 0xA3, 0xEF, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFE, 0x24, 0x84, 0xF5, 0x82,
++0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE0, 0x54, 0x3F, 0x90, 0x8A, 0xD0, 0xF0, 0xE0, 0xFD, 0x54, 0x1F,
++0xA3, 0xF0, 0x75, 0xF0, 0x09, 0xEE, 0x90, 0x87, 0x27, 0x12, 0x43, 0x5F, 0xE0, 0x90, 0x8A, 0xD9,
++0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFB, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0,
++0xC3, 0x94, 0x05, 0x40, 0x02, 0x61, 0x1A, 0x90, 0x8A, 0xD9, 0xE0, 0xFE, 0x90, 0x8A, 0xD1, 0xE0,
++0x9E, 0x40, 0x13, 0x90, 0x8A, 0xD9, 0xE0, 0x90, 0x8A, 0xD1, 0xF0, 0xED, 0x54, 0x40, 0xFD, 0x90,
++0x8A, 0xD0, 0xF0, 0xEE, 0x4D, 0xF0, 0x90, 0x8A, 0xD1, 0xE0, 0xFF, 0x90, 0x41, 0x12, 0x93, 0xFE,
++0x74, 0x23, 0x2B, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xC3, 0x9E, 0x40, 0x06, 0xEF,
++0x90, 0x40, 0xDA, 0x80, 0x07, 0x90, 0x8A, 0xD1, 0xE0, 0x90, 0x40, 0xF6, 0x93, 0x90, 0x8A, 0xD8,
++0xF0, 0x90, 0x8A, 0xD8, 0xE0, 0x75, 0xF0, 0x06, 0xA4, 0x24, 0x50, 0xF9, 0x74, 0x40, 0x35, 0xF0,
++0x75, 0x0F, 0xFF, 0xF5, 0x10, 0x89, 0x11, 0x90, 0x8A, 0xD0, 0xE0, 0x90, 0x41, 0xBA, 0x93, 0xFF,
++0xD3, 0x90, 0x8A, 0xD7, 0xE0, 0x9F, 0x90, 0x8A, 0xD6, 0xE0, 0x94, 0x00, 0x40, 0x0C, 0x90, 0x8A,
++0xCF, 0xE0, 0xFF, 0xE4, 0xFD, 0x12, 0x5D, 0xB4, 0xC1, 0x5B, 0x90, 0x8A, 0xCF, 0xE0, 0x25, 0xE0,
++0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0xFF, 0xA3, 0xE0, 0x90, 0x8A, 0xD2,
++0xCF, 0xF0, 0xA3, 0xEF, 0xF0, 0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x12, 0x29, 0xD9, 0xFF, 0x7E,
++0x00, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x12, 0x42, 0x97, 0xFD, 0xAC, 0xF0, 0x12, 0x29, 0xF2,
++0x90, 0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x90,
++0x00, 0x01, 0x12, 0x42, 0x20, 0xFF, 0x7E, 0x00, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00,
++0x02, 0x12, 0x42, 0xC2, 0xFD, 0xAC, 0xF0, 0x12, 0x29, 0xF2, 0x90, 0x8A, 0xD2, 0xEE, 0x8F, 0xF0,
++0x12, 0x42, 0x81, 0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFF,
++0x7E, 0x00, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x04, 0x12, 0x42, 0xC2, 0xFD, 0xAC,
++0xF0, 0x12, 0x29, 0xF2, 0x90, 0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xAB, 0x0F, 0xAA,
++0x10, 0xA9, 0x11, 0x90, 0x00, 0x03, 0x12, 0x42, 0x20, 0xFF, 0x7E, 0x00, 0xAB, 0x12, 0xAA, 0x13,
++0xA9, 0x14, 0x90, 0x00, 0x06, 0x12, 0x42, 0xC2, 0xFD, 0xAC, 0xF0, 0x12, 0x29, 0xF2, 0x90, 0x8A,
++0xD2, 0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x90, 0x00, 0x04,
++0x12, 0x42, 0x20, 0xFF, 0x7E, 0x00, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x08, 0x12,
++0x42, 0xC2, 0xFD, 0xAC, 0xF0, 0x12, 0x29, 0xF2, 0x90, 0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12, 0x42,
++0x81, 0xAB, 0x0F, 0xAA, 0x10, 0xA9, 0x11, 0x90, 0x00, 0x05, 0x12, 0x42, 0x20, 0xFF, 0x7E, 0x00,
++0x90, 0x8A, 0xD4, 0xE0, 0xFC, 0xA3, 0xE0, 0xFD, 0x12, 0x29, 0xF2, 0xD3, 0x90, 0x8A, 0xD3, 0xE0,
++0x9F, 0x90, 0x8A, 0xD2, 0xE0, 0x9E, 0x40, 0x0C, 0xA3, 0xE0, 0x9F, 0xF0, 0x90, 0x8A, 0xD2, 0xE0,
++0x9E, 0xF0, 0x80, 0x07, 0xE4, 0x90, 0x8A, 0xD2, 0xF0, 0xA3, 0xF0, 0x90, 0x8A, 0xD2, 0xE0, 0xFC,
++0xA3, 0xE0, 0xFD, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34,
++0x86, 0xF5, 0x83, 0xEC, 0xF0, 0xA3, 0xED, 0xF0, 0x90, 0x8A, 0xD0, 0xE0, 0x25, 0xE0, 0x24, 0x2E,
++0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xD3, 0xED,
++0x9B, 0xEC, 0x9A, 0x40, 0x04, 0xD1, 0xCE, 0xC1, 0x29, 0x90, 0x8A, 0xD0, 0xE0, 0x25, 0xE0, 0x24,
++0x66, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFE, 0x74, 0x01, 0x93, 0xFF, 0xC3,
++0x90, 0x8A, 0xD3, 0xE0, 0x9F, 0x90, 0x8A, 0xD2, 0xE0, 0x9E, 0x40, 0x02, 0xC1, 0x29, 0x90, 0x8A,
++0xCF, 0xE0, 0xFF, 0x7D, 0x01, 0x12, 0x5D, 0xB4, 0xC1, 0x29, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x24,
++0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, 0xFC, 0x64, 0x05, 0x60, 0x02, 0x81, 0xF8,
++0x90, 0x87, 0x22, 0xE0, 0xFE, 0xB4, 0x03, 0x0B, 0x90, 0x8A, 0xD1, 0xE0, 0xC3, 0x94, 0x19, 0x40,
++0x3D, 0x80, 0x2E, 0xEE, 0xB4, 0x02, 0x0B, 0x90, 0x8A, 0xD1, 0xE0, 0xC3, 0x94, 0x11, 0x40, 0x2E,
++0x80, 0x1F, 0x90, 0x87, 0x22, 0xE0, 0xFE, 0xB4, 0x01, 0x0B, 0x90, 0x8A, 0xD1, 0xE0, 0xC3, 0x94,
++0x0A, 0x40, 0x1B, 0x80, 0x0C, 0xEE, 0x70, 0x11, 0x90, 0x8A, 0xD1, 0xE0, 0xC3, 0x94, 0x03, 0x40,
++0x0D, 0x90, 0x89, 0x43, 0x74, 0x01, 0xF0, 0x80, 0x05, 0xE4, 0x90, 0x89, 0x43, 0xF0, 0x90, 0x8A,
++0xCF, 0xE0, 0xFE, 0x24, 0x43, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE0, 0x90, 0x8A, 0xDD,
++0xF0, 0x74, 0x23, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFE, 0xC3, 0x94, 0x30,
++0x50, 0x0A, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0x74, 0x64, 0x2F, 0x81, 0xA3, 0x90, 0x89, 0x43, 0xE0,
++0x64, 0x01, 0x60, 0x02, 0x81, 0x98, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x44, 0xF5, 0x82, 0xE4, 0x34,
++0x89, 0xF5, 0x83, 0xE0, 0x64, 0x0A, 0x60, 0x5B, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0xEE, 0x24, 0x05,
++0xFB, 0xE4, 0x33, 0xFA, 0x74, 0x21, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xE0, 0xFF,
++0xD3, 0x9B, 0xEA, 0x64, 0x80, 0xF8, 0x74, 0x80, 0x98, 0x50, 0x38, 0x90, 0x8A, 0xCF, 0xE0, 0xFE,
++0xEF, 0x24, 0x05, 0xFB, 0xE4, 0x33, 0xFA, 0x74, 0x23, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5,
++0x83, 0xE0, 0xD3, 0x9B, 0xEA, 0x64, 0x80, 0xF8, 0x74, 0x80, 0x98, 0x50, 0x16, 0x90, 0x8A, 0xCF,
++0xE0, 0x24, 0x84, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, 0xFF, 0x90, 0x8A, 0xD1, 0xE0,
++0x6F, 0x60, 0x56, 0x90, 0x8A, 0xCF, 0xE0, 0x24, 0x23, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83,
++0xE0, 0xFF, 0xD3, 0x94, 0x42, 0x40, 0x08, 0x90, 0x8A, 0xDD, 0x74, 0x05, 0xF0, 0x80, 0x11, 0xEF,
++0xD3, 0x94, 0x39, 0x90, 0x8A, 0xDD, 0x40, 0x05, 0x74, 0x03, 0xF0, 0x80, 0x03, 0x74, 0x01, 0xF0,
++0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x24, 0x23, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFE,
++0x74, 0x21, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xEE, 0xF0, 0x90, 0x8A, 0xCF, 0xE0,
++0x24, 0x44, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0x80, 0x2F, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x24, 0x64,
++0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, 0x74, 0x44, 0x2F, 0xF5, 0x82, 0xE4, 0x34,
++0x89, 0xF5, 0x83, 0xE0, 0x04, 0xF0, 0x80, 0x14, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0x90, 0x8A, 0xCF,
++0xE0, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, 0x90, 0x8A, 0xD1, 0xE0,
++0xFE, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x24, 0x84, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEE,
++0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0xFE, 0x74, 0x43, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83,
++0xEE, 0xF0, 0x75, 0xF0, 0x09, 0xEF, 0x90, 0x87, 0x2B, 0x12, 0x43, 0x5F, 0xE0, 0xB4, 0x01, 0x11,
++0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0x74, 0x64, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4,
++0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0xFD, 0xC1, 0x27, 0xEC, 0x64, 0x06, 0x60, 0x02, 0xC1, 0x29, 0x90,
++0x8A, 0xD2, 0xF0, 0xA3, 0xF0, 0x90, 0x41, 0xDB, 0x93, 0xFF, 0x7E, 0x00, 0x90, 0x8A, 0xD4, 0xE0,
++0xFC, 0xA3, 0xE0, 0xFD, 0x12, 0x29, 0xF2, 0x90, 0x8A, 0xDB, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0x90,
++0x8A, 0xCF, 0xE0, 0x24, 0x43, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5, 0x83, 0xE0, 0x90, 0x8A, 0xDD,
++0xF0, 0xE4, 0x90, 0x8A, 0xDA, 0xF0, 0x90, 0x8A, 0xDA, 0xE0, 0xFF, 0xD3, 0x94, 0x04, 0x50, 0x47,
++0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x75, 0xF0, 0x02, 0xEF, 0xA4, 0xF5, 0x82, 0x85, 0xF0, 0x83,
++0x12, 0x42, 0xC2, 0xFD, 0xAC, 0xF0, 0xEF, 0x90, 0x41, 0xD6, 0x93, 0xFF, 0x7E, 0x00, 0x12, 0x29,
++0xF2, 0x90, 0x8A, 0xD2, 0xEE, 0x8F, 0xF0, 0x12, 0x42, 0x81, 0x90, 0x8A, 0xDB, 0xE0, 0xFE, 0xA3,
++0xE0, 0xFF, 0xD3, 0x90, 0x8A, 0xD3, 0xE0, 0x9F, 0x90, 0x8A, 0xD2, 0xE0, 0x9E, 0x50, 0x08, 0x90,
++0x8A, 0xDA, 0xE0, 0x04, 0xF0, 0x80, 0xAF, 0x90, 0x8A, 0xDA, 0xE0, 0xC3, 0x13, 0xF0, 0x90, 0x8A,
++0xDD, 0xE0, 0xFF, 0xB4, 0x01, 0x0D, 0x90, 0x8A, 0xDA, 0xE0, 0x70, 0x5D, 0x90, 0x8A, 0xDD, 0x04,
++0xF0, 0x80, 0x5B, 0xEF, 0xB4, 0x03, 0x1D, 0x90, 0x8A, 0xDA, 0xE0, 0xFF, 0x70, 0x08, 0x90, 0x8A,
++0xDD, 0x74, 0x03, 0xF0, 0x80, 0x48, 0xEF, 0xB4, 0x01, 0x08, 0x90, 0x8A, 0xDD, 0x74, 0x01, 0xF0,
++0x80, 0x3C, 0x80, 0x35, 0x90, 0x8A, 0xDD, 0xE0, 0x64, 0x05, 0x70, 0x32, 0x90, 0x8A, 0xDA, 0xE0,
++0xFF, 0x70, 0x08, 0x90, 0x8A, 0xDD, 0x74, 0x05, 0xF0, 0x80, 0x0F, 0xEF, 0x90, 0x8A, 0xDD, 0xB4,
++0x01, 0x05, 0x74, 0x03, 0xF0, 0x80, 0x03, 0x74, 0x01, 0xF0, 0xD3, 0x90, 0x8A, 0xD7, 0xE0, 0x94,
++0x03, 0x90, 0x8A, 0xD6, 0xE0, 0x94, 0x00, 0x40, 0x05, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0xD3, 0x90,
++0x8A, 0xD7, 0xE0, 0x94, 0x03, 0x90, 0x8A, 0xD6, 0xE0, 0x94, 0x00, 0x40, 0x05, 0xE4, 0x90, 0x8A,
++0xDD, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0xFD, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x24, 0x43, 0xF5, 0x82,
++0xE4, 0x34, 0x88, 0xF5, 0x83, 0xED, 0xF0, 0x11, 0x02, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x24, 0x64,
++0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, 0xD3, 0x94, 0x05, 0x50, 0x0F, 0x74, 0x64, 0x2F,
++0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE0, 0x04, 0xF0, 0x80, 0x0F, 0x90, 0x8A, 0xCF, 0xE0,
++0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, 0xAB, 0x12, 0xAA, 0x13, 0xA9,
++0x14, 0xE4, 0xF5, 0xF0, 0x12, 0x42, 0xFA, 0xAB, 0x12, 0xAA, 0x13, 0xA9, 0x14, 0x90, 0x00, 0x02,
++0xE4, 0xF5, 0xF0, 0x12, 0x43, 0x19, 0x90, 0x00, 0x04, 0xE4, 0xF5, 0xF0, 0x12, 0x43, 0x19, 0x90,
++0x00, 0x06, 0xE4, 0xF5, 0xF0, 0x12, 0x43, 0x19, 0x90, 0x00, 0x08, 0xE4, 0xF5, 0xF0, 0x12, 0x43,
++0x19, 0x90, 0x8A, 0xCF, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0xC0, 0xF5, 0x82, 0xE4, 0x34, 0x85, 0xF5,
++0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0x63, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5,
++0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xA3, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5,
++0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0x04, 0xF0, 0x01, 0x47, 0x22, 0xAD, 0x07,
++0x74, 0x84, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE0, 0x54, 0x7F, 0x90, 0x8A, 0xDE,
++0xF0, 0xE0, 0xF9, 0x54, 0x1F, 0xA3, 0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x27, 0x12, 0x43,
++0x5F, 0xE0, 0xFF, 0x90, 0x8A, 0xE1, 0xF0, 0xED, 0x25, 0xE0, 0x24, 0x81, 0xF5, 0x82, 0xE4, 0x34,
++0x86, 0xF5, 0x83, 0xE0, 0xFB, 0xA3, 0xE0, 0x90, 0x8A, 0xE2, 0xCB, 0xF0, 0xA3, 0xEB, 0xF0, 0xED,
++0x25, 0xE0, 0x24, 0xE4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE0, 0xFB, 0xA3, 0xE0, 0x90,
++0x8A, 0xE4, 0xCB, 0xF0, 0xA3, 0xEB, 0xF0, 0x90, 0x8A, 0xDF, 0xE0, 0xFE, 0x25, 0xE0, 0x24, 0x2E,
++0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xED, 0x25,
++0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xEA, 0xF0, 0xA3, 0xEB, 0xF0, 0xEE,
++0xC3, 0x9F, 0x40, 0x03, 0x02, 0x70, 0x12, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x74, 0xA5, 0x2D, 0xF5,
++0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEF, 0xF0, 0xEF, 0x04, 0x90, 0x8A, 0xE0, 0xF0, 0x90, 0x8A,
++0xE1, 0xE0, 0xFF, 0x90, 0x8A, 0xE0, 0xE0, 0xFE, 0xD3, 0x9F, 0x40, 0x03, 0x02, 0x70, 0x4C, 0xEE,
++0xC3, 0x94, 0x10, 0x40, 0x21, 0xEE, 0x24, 0xF0, 0xFF, 0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08,
++0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9, 0xFF, 0x90, 0x8A, 0xE2, 0xE0, 0x5E, 0xFE,
++0xA3, 0xE0, 0x5F, 0x4E, 0x70, 0x27, 0x90, 0x8A, 0xE0, 0xE0, 0xFF, 0xC3, 0x94, 0x10, 0x50, 0x59,
++0x74, 0x01, 0x7E, 0x00, 0xA8, 0x07, 0x08, 0x80, 0x05, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9,
++0xFF, 0x90, 0x8A, 0xE4, 0xE0, 0x5E, 0xFE, 0xA3, 0xE0, 0x5F, 0x4E, 0x60, 0x3C, 0x90, 0x8A, 0xE0,
++0xE0, 0xB4, 0x11, 0x0D, 0x90, 0x8A, 0xE3, 0xE0, 0x30, 0xE7, 0x06, 0x90, 0x8A, 0xE0, 0x74, 0x17,
++0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0xFF, 0x64, 0x13, 0x60, 0x04, 0xEF, 0xB4, 0x12, 0x0D, 0x90, 0x8A,
++0xE2, 0xE0, 0x30, 0xE0, 0x06, 0x90, 0x8A, 0xE0, 0x74, 0x18, 0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0x90,
++0x8A, 0xDF, 0xF0, 0x90, 0x8A, 0xDE, 0xF0, 0x80, 0x43, 0x90, 0x8A, 0xE0, 0xE0, 0x04, 0xF0, 0x02,
++0x6F, 0x6E, 0x90, 0x8A, 0xE1, 0xE0, 0xFC, 0x90, 0x8A, 0xDF, 0xE0, 0xFF, 0x6C, 0x70, 0x71, 0x74,
++0xA5, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEF, 0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90,
++0x87, 0x29, 0x12, 0x43, 0x5F, 0xE0, 0xB4, 0x01, 0x10, 0xE9, 0x20, 0xE6, 0x0C, 0x90, 0x8A, 0xDF,
++0xE0, 0x44, 0x40, 0x90, 0x8A, 0xDE, 0xF0, 0x80, 0x03, 0xAF, 0x01, 0x22, 0x90, 0x8A, 0xDF, 0xE0,
++0xFF, 0x25, 0xE0, 0x24, 0x66, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0xE4, 0x93, 0xFA, 0x74,
++0x01, 0x93, 0xFB, 0xEF, 0x25, 0xE0, 0x24, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5, 0x83, 0x74,
++0x01, 0x93, 0x2B, 0xFF, 0xE4, 0x93, 0x3A, 0xC3, 0x13, 0xFE, 0xEF, 0x13, 0xFF, 0xED, 0x25, 0xE0,
++0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0x80, 0x66,
++0x90, 0x8A, 0xDF, 0xE0, 0xD3, 0x9C, 0x40, 0x5E, 0x90, 0x8A, 0xE1, 0xE0, 0xFF, 0x74, 0xA5, 0x2D,
++0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEF, 0xF0, 0x90, 0x8A, 0xDF, 0xEF, 0xF0, 0x90, 0x8A,
++0xDE, 0xF0, 0xFC, 0xA3, 0xE0, 0xFF, 0x25, 0xE0, 0x24, 0x66, 0xF5, 0x82, 0xE4, 0x34, 0x41, 0xF5,
++0x83, 0xE4, 0x93, 0xFA, 0x74, 0x01, 0x93, 0xFB, 0xEF, 0x25, 0xE0, 0x24, 0x2E, 0xF5, 0x82, 0xE4,
++0x34, 0x41, 0xF5, 0x83, 0x74, 0x01, 0x93, 0x2B, 0xFF, 0xE4, 0x93, 0x3A, 0xC3, 0x13, 0xFE, 0xEF,
++0x13, 0xFF, 0xED, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0xEE, 0xF0,
++0xA3, 0xEF, 0xF0, 0xAF, 0x04, 0x22, 0x74, 0x01, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83,
++0xE4, 0xF0, 0xAF, 0x05, 0x90, 0x8A, 0xDE, 0xE0, 0x44, 0x80, 0xFD, 0x12, 0x5C, 0xC1, 0x90, 0x8A,
++0xDE, 0xE0, 0x44, 0x80, 0xFF, 0x22, 0xE4, 0x90, 0x8A, 0xCF, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0xFF,
++0xC3, 0x94, 0x10, 0x50, 0x14, 0x74, 0xA4, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x04, 0xF5, 0x83, 0xE4,
++0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0x04, 0xF0, 0x80, 0xE2, 0xE4, 0x90, 0x8A, 0xCF, 0xF0, 0x90, 0x8A,
++0xCF, 0xE0, 0xFF, 0xC3, 0x94, 0x20, 0x40, 0x02, 0x41, 0xCF, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84,
++0x00, 0x12, 0x43, 0x5F, 0xE4, 0xF0, 0xA3, 0xF0, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x02, 0x12,
++0x43, 0x5F, 0xE4, 0xF0, 0xA3, 0xF0, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x04, 0x12, 0x43, 0x5F,
++0xE4, 0xF0, 0xA3, 0xF0, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x06, 0x12, 0x43, 0x5F, 0xE4, 0xF0,
++0xA3, 0xF0, 0x75, 0xF0, 0x0A, 0xEF, 0x90, 0x84, 0x08, 0x12, 0x43, 0x5F, 0xE4, 0xF0, 0xA3, 0xF0,
++0x74, 0x84, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0x74, 0x13, 0xF0, 0x74, 0x44, 0x2F,
++0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xE4, 0xF0, 0x74, 0x43, 0x2F, 0xF5, 0x82, 0xE4, 0x34,
++0x88, 0xF5, 0x83, 0xE4, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xC0, 0xF5, 0x82, 0xE4, 0x34, 0x85, 0xF5,
++0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0x63, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5,
++0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xE3, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5,
++0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xA3, 0xF5, 0x82, 0xE4, 0x34, 0x88, 0xF5,
++0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0x64, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5,
++0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0xEF, 0x25, 0xE0, 0x24, 0xA4, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5,
++0x83, 0xE4, 0xF0, 0xA3, 0xF0, 0x74, 0x44, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4,
++0xF0, 0x74, 0x24, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, 0x74, 0x64, 0x2F,
++0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xE4, 0xF0, 0x90, 0x41, 0x8C, 0x93, 0xFE, 0x74, 0x01,
++0x93, 0xFF, 0x90, 0x41, 0x54, 0x74, 0x01, 0x93, 0x2F, 0xFF, 0xE4, 0x93, 0x3E, 0xC3, 0x13, 0xFE,
++0xEF, 0x13, 0xFF, 0x90, 0x8A, 0xCF, 0xE0, 0xFD, 0x25, 0xE0, 0x24, 0xE1, 0xF5, 0x82, 0xE4, 0x34,
++0x86, 0xF5, 0x83, 0xEE, 0xF0, 0xA3, 0xEF, 0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x29, 0x12,
++0x43, 0x5F, 0x74, 0x01, 0xF0, 0x74, 0xC1, 0x2D, 0xF5, 0x82, 0xE4, 0x34, 0x86, 0xF5, 0x83, 0x74,
++0x0C, 0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x25, 0x12, 0x43, 0x5F, 0x74, 0xFF, 0xF0, 0xA3,
++0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x23, 0x12, 0x43, 0x5F, 0xE4, 0xF0, 0xA3, 0x74, 0x0F,
++0xF0, 0x75, 0xF0, 0x09, 0xED, 0x90, 0x87, 0x27, 0x12, 0x43, 0x5F, 0x74, 0x13, 0xF0, 0x75, 0xF0,
++0x09, 0xED, 0x90, 0x87, 0x28, 0x12, 0x43, 0x5F, 0xE4, 0xF0, 0x74, 0x84, 0x2D, 0xF5, 0x82, 0xE4,
++0x34, 0x04, 0xF5, 0x83, 0x74, 0x13, 0xF0, 0x90, 0x8A, 0xCF, 0xE0, 0x04, 0xF0, 0x21, 0x3E, 0x22,
++0x12, 0x29, 0xD9, 0xFF, 0xC3, 0x94, 0x20, 0x50, 0x14, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFE,
++0x74, 0x23, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x89, 0xF5, 0x83, 0xEE, 0xF0, 0x22, 0xEF, 0xB4, 0x20,
++0x0A, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0x90, 0x87, 0x21, 0xF0, 0x22, 0x12, 0x29, 0xD9, 0xF5,
++0x21, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8A, 0xDA, 0x12, 0x2A, 0x8B, 0x00,
++0x00, 0x00, 0x00, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0x90, 0x8B, 0x1A, 0xF0, 0x90, 0x00, 0x03,
++0x12, 0x42, 0x20, 0x90, 0x8B, 0x0A, 0xF0, 0x12, 0x47, 0xFA, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x90,
++0x00, 0x02, 0x12, 0x42, 0x20, 0xFF, 0x30, 0xE0, 0x25, 0x12, 0x29, 0xD9, 0x90, 0x8B, 0x10, 0xF0,
++0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0x90, 0x8B, 0x11, 0xF0, 0xEF, 0xC3, 0x13, 0x54, 0x7F, 0x90,
++0x8B, 0x0F, 0xF0, 0x90, 0x00, 0x03, 0x12, 0x42, 0x20, 0x90, 0x8B, 0x16, 0xF0, 0x22, 0x90, 0x8B,
++0x10, 0x74, 0x03, 0xF0, 0x90, 0x8B, 0x11, 0x74, 0x05, 0xF0, 0x90, 0x8B, 0x0F, 0x74, 0x14, 0xF0,
++0x90, 0x8B, 0x16, 0x74, 0x05, 0xF0, 0x22, 0x12, 0x29, 0xD9, 0x30, 0xE0, 0x19, 0xC3, 0x13, 0x54,
++0x7F, 0x90, 0x8B, 0x15, 0xF0, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20, 0xFF, 0x90, 0x8B, 0x13, 0xE4,
++0xF0, 0xA3, 0xEF, 0xF0, 0x80, 0x0F, 0x90, 0x8B, 0x15, 0x74, 0x05, 0xF0, 0x90, 0x8B, 0x13, 0xE4,
++0xF0, 0xA3, 0x74, 0x03, 0xF0, 0x90, 0x8B, 0x13, 0xE0, 0xA3, 0xE0, 0x90, 0x05, 0x58, 0xF0, 0x22,
++0x12, 0x29, 0xD9, 0x90, 0x8B, 0x12, 0xF0, 0x60, 0x07, 0xE4, 0xFD, 0x7F, 0x04, 0x12, 0x45, 0xA2,
++0x90, 0x8B, 0x12, 0xE0, 0x90, 0x01, 0xE7, 0xF0, 0x22, 0x90, 0x02, 0x09, 0xE0, 0xFD, 0x12, 0x29,
++0xD9, 0xFE, 0xAF, 0x05, 0xED, 0x2E, 0x90, 0x8A, 0xF7, 0xF0, 0x90, 0x00, 0x01, 0x12, 0x42, 0x20,
++0xFF, 0xED, 0x2F, 0x90, 0x8A, 0xF8, 0xF0, 0x90, 0x00, 0x02, 0x12, 0x42, 0x20, 0xFF, 0xED, 0x2F,
++0x90, 0x8A, 0xF9, 0xF0, 0x90, 0x00, 0x03, 0x12, 0x42, 0x20, 0xFF, 0xED, 0x2F, 0x90, 0x8A, 0xFA,
++0xF0, 0x90, 0x00, 0x04, 0x12, 0x42, 0x20, 0xFF, 0xAE, 0x05, 0xED, 0x2F, 0x90, 0x8A, 0xFB, 0xF0,
++0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x8B, 0xE4, 0x90,
++0x8A, 0xDD, 0xF0, 0x12, 0x29, 0xD9, 0xC3, 0x13, 0x20, 0xE0, 0x02, 0xA1, 0x62, 0x90, 0x8A, 0xDA,
++0x12, 0x43, 0x6B, 0x12, 0x29, 0xD9, 0xFF, 0x54, 0x02, 0xFE, 0x90, 0x8B, 0x32, 0xE0, 0x54, 0xFD,
++0x4E, 0xFE, 0xF0, 0xEF, 0x54, 0x01, 0xFF, 0xEE, 0x54, 0xFE, 0x4F, 0xFF, 0xF0, 0x12, 0x29, 0xD9,
++0xFE, 0x54, 0x08, 0xFD, 0xEF, 0x54, 0xF7, 0x4D, 0xFF, 0x90, 0x8B, 0x32, 0xF0, 0xEE, 0x54, 0x10,
++0xFE, 0xEF, 0x54, 0xEF, 0x4E, 0xFF, 0xF0, 0x12, 0x29, 0xD9, 0xFE, 0x54, 0x20, 0xFD, 0xEF, 0x54,
++0xDF, 0x4D, 0xFF, 0x90, 0x8B, 0x32, 0xF0, 0xEE, 0x54, 0x40, 0xFE, 0xEF, 0x54, 0xBF, 0x4E, 0xF0,
++0x20, 0xE0, 0x02, 0xA1, 0x4F, 0x90, 0x8A, 0xDD, 0x74, 0x21, 0xF0, 0x90, 0x8A, 0xDA, 0x12, 0x43,
++0x6B, 0x12, 0x29, 0xD9, 0xFF, 0x13, 0x13, 0x54, 0x01, 0xFE, 0x90, 0x8B, 0x32, 0xE0, 0xFD, 0x13,
++0x13, 0x54, 0x01, 0x6E, 0x60, 0x2A, 0xEF, 0x54, 0x04, 0xFF, 0xED, 0x54, 0xFB, 0x4F, 0xF0, 0xE0,
++0x13, 0x13, 0x54, 0x3F, 0x30, 0xE0, 0x0E, 0x90, 0x01, 0x34, 0x74, 0x40, 0xF0, 0xFD, 0xE4, 0xFF,
++0x12, 0x36, 0xE6, 0x80, 0x0B, 0xE4, 0x90, 0x8B, 0x34, 0xF0, 0x7D, 0x40, 0xFF, 0x12, 0x36, 0x75,
++0x90, 0x8B, 0x32, 0xE0, 0xFD, 0x13, 0x13, 0x13, 0x54, 0x1F, 0x30, 0xE0, 0x07, 0x90, 0x8A, 0xDD,
++0xE0, 0x44, 0x12, 0xF0, 0xED, 0xC4, 0x54, 0x0F, 0x30, 0xE0, 0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x44,
++0x14, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0xC4, 0x13, 0x54, 0x07, 0x30, 0xE0, 0x07, 0x90, 0x8A, 0xDD,
++0xE0, 0x44, 0x80, 0xF0, 0x90, 0x8B, 0x32, 0xE0, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x20, 0xE0, 0x07,
++0x90, 0x8A, 0xDD, 0xE0, 0x44, 0x40, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0x90, 0x05, 0x27, 0xF0, 0x90,
++0x8B, 0x33, 0xE0, 0x70, 0x05, 0x7F, 0x01, 0x12, 0x4E, 0x89, 0x90, 0x8B, 0x32, 0xE0, 0xC4, 0x13,
++0x13, 0x54, 0x03, 0x30, 0xE0, 0x04, 0x7F, 0x03, 0x80, 0x0E, 0x7F, 0x01, 0x12, 0x4D, 0xE0, 0xEF,
++0x60, 0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F, 0x02, 0x12, 0x4E, 0x89, 0x7F, 0x02, 0xC1, 0xA4, 0x90,
++0x8A, 0xDD, 0x74, 0x01, 0xF0, 0x90, 0x05, 0x27, 0xF0, 0xE4, 0xFF, 0x12, 0x4E, 0x89, 0x7F, 0x03,
++0xC1, 0xA4, 0x90, 0x8A, 0xDA, 0x12, 0x43, 0x6B, 0x12, 0x29, 0xD9, 0xFF, 0x54, 0x02, 0xFE, 0x90,
++0x8B, 0x2C, 0xE0, 0x54, 0xFD, 0x4E, 0xFE, 0xF0, 0xEF, 0x54, 0x01, 0xFF, 0xEE, 0x54, 0xFE, 0x4F,
++0xFF, 0xF0, 0x12, 0x29, 0xD9, 0xFE, 0x54, 0x08, 0xFD, 0xEF, 0x54, 0xF7, 0x4D, 0xFF, 0x90, 0x8B,
++0x2C, 0xF0, 0xEE, 0x54, 0x10, 0xFE, 0xEF, 0x54, 0xEF, 0x4E, 0xFF, 0xF0, 0x12, 0x29, 0xD9, 0xFE,
++0x54, 0x40, 0xFD, 0xEF, 0x54, 0xBF, 0x4D, 0xFF, 0x90, 0x8B, 0x2C, 0xF0, 0xEE, 0x54, 0x04, 0xFE,
++0xEF, 0x54, 0xFB, 0x4E, 0xF0, 0x20, 0xE0, 0x02, 0xC1, 0x57, 0x90, 0x8A, 0xDD, 0x74, 0x31, 0xF0,
++0x90, 0x8B, 0x2C, 0xE0, 0x13, 0x13, 0x54, 0x3F, 0x20, 0xE0, 0x0B, 0xE4, 0x90, 0x8B, 0x2E, 0xF0,
++0x7D, 0x40, 0xFF, 0x12, 0x36, 0x75, 0x90, 0x8B, 0x2C, 0xE0, 0xFD, 0x13, 0x13, 0x13, 0x54, 0x1F,
++0x30, 0xE0, 0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x44, 0x02, 0xF0, 0xED, 0xC4, 0x54, 0x0F, 0x30, 0xE0,
++0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x44, 0x04, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0x54, 0x06, 0x60, 0x0C,
++0x90, 0x01, 0x3E, 0x74, 0x03, 0xF0, 0xFD, 0x7F, 0x02, 0x12, 0x37, 0x00, 0x90, 0x8A, 0xDD, 0xE0,
++0x90, 0x05, 0x27, 0xF0, 0x90, 0x8B, 0x2C, 0xE0, 0xFF, 0xC4, 0x13, 0x13, 0x54, 0x03, 0x30, 0xE0,
++0x0D, 0xA3, 0xE0, 0x64, 0x06, 0x60, 0x2C, 0x7F, 0x06, 0x12, 0x7B, 0x49, 0x80, 0x25, 0x90, 0x8B,
++0x2D, 0xE0, 0xB4, 0x06, 0x1B, 0x7F, 0x01, 0x12, 0x7B, 0x49, 0xE4, 0xFF, 0x12, 0x4D, 0xE0, 0xEF,
++0x60, 0x09, 0x7D, 0x01, 0xAF, 0x23, 0x12, 0x45, 0xA2, 0x80, 0x05, 0x12, 0x4E, 0x56, 0x80, 0x03,
++0x12, 0x66, 0x20, 0x7F, 0x01, 0x80, 0x4D, 0x90, 0x8A, 0xDD, 0x74, 0x01, 0xF0, 0x90, 0x05, 0x27,
++0xF0, 0x7D, 0x03, 0x7F, 0x02, 0x12, 0x36, 0x92, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x06, 0x02, 0x80,
++0x1B, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04, 0x02, 0x80, 0x07, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05,
++0x04, 0xE4, 0xFF, 0x80, 0x14, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x03, 0x04, 0x7F, 0x01, 0x80, 0x09,
++0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02, 0x05, 0x7F, 0x01, 0x12, 0x7B, 0x49, 0x12, 0x66, 0x13, 0x12,
++0x4A, 0xFC, 0x7F, 0x03, 0xD1, 0xAB, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xAD, 0x07, 0xEF, 0x64, 0x01,
++0x60, 0x04, 0xEF, 0xB4, 0x03, 0x15, 0x90, 0x8B, 0x32, 0xE0, 0x54, 0xFE, 0xF0, 0x54, 0xFB, 0xF0,
++0xE4, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xED, 0x64, 0x02, 0x60, 0x04,
++0xED, 0xB4, 0x03, 0x15, 0x90, 0x8B, 0x2C, 0xE0, 0x54, 0xFE, 0xF0, 0x54, 0xFB, 0xF0, 0xE4, 0xA3,
++0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0xA3, 0xF0, 0x22, 0x12, 0x29, 0xD9, 0x90, 0x8B, 0x38,
++0xF0, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0x90, 0x8A, 0xFD, 0xE0, 0x90, 0x8A, 0xE8,
++0xF0, 0x90, 0x8A, 0xFE, 0xE0, 0xFF, 0xA3, 0xE0, 0x90, 0x8A, 0xE9, 0xCF, 0xF0, 0xA3, 0xEF, 0xF0,
++0xE4, 0x90, 0x8A, 0xE4, 0xF0, 0x90, 0x8A, 0xE4, 0xE0, 0xFF, 0x24, 0x00, 0xF5, 0x82, 0xE4, 0x34,
++0x8B, 0xF5, 0x83, 0xE0, 0xFE, 0x74, 0xEB, 0x2F, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEE,
++0xF0, 0x90, 0x8A, 0xE4, 0xE0, 0x04, 0xF0, 0xE0, 0xB4, 0x04, 0xDA, 0x90, 0x8A, 0xE8, 0xE0, 0x12,
++0x43, 0x94, 0x77, 0x61, 0x00, 0x78, 0xD7, 0x01, 0x77, 0x6C, 0x02, 0x77, 0x6C, 0x03, 0x77, 0x6C,
++0x04, 0x78, 0xD7, 0x05, 0x78, 0xA1, 0x80, 0x78, 0xBA, 0x81, 0x78, 0xD7, 0x82, 0x00, 0x00, 0x78,
++0xD3, 0x90, 0x8A, 0xEE, 0xE0, 0xFF, 0x12, 0x7E, 0x6E, 0x02, 0x78, 0xD7, 0x90, 0x8A, 0xE8, 0xE0,
++0xFF, 0xB4, 0x02, 0x08, 0x90, 0x8A, 0xE5, 0x74, 0x01, 0xF0, 0x80, 0x0F, 0xEF, 0x90, 0x8A, 0xE5,
++0xB4, 0x03, 0x05, 0x74, 0x02, 0xF0, 0x80, 0x03, 0x74, 0x04, 0xF0, 0xC3, 0x90, 0x8A, 0xE9, 0xE0,
++0x94, 0x08, 0x50, 0x79, 0xE4, 0x90, 0x8A, 0xE4, 0xF0, 0x90, 0x8A, 0xE5, 0xE0, 0xFF, 0x90, 0x8A,
++0xE4, 0xE0, 0xC3, 0x9F, 0x40, 0x03, 0x02, 0x78, 0xD7, 0x90, 0x8A, 0xE9, 0xE0, 0xFE, 0xA3, 0xE0,
++0xFF, 0xC3, 0xEE, 0x94, 0x01, 0x90, 0x8A, 0xE4, 0xE0, 0x50, 0x1F, 0xFE, 0x2F, 0xFF, 0xEE, 0xFD,
++0xC3, 0x74, 0x03, 0x9D, 0xFD, 0xE4, 0x94, 0x00, 0xFC, 0x74, 0xEB, 0x2D, 0xF5, 0x82, 0x74, 0x8A,
++0x3C, 0xF5, 0x83, 0xE0, 0xFD, 0x12, 0x51, 0xFB, 0x80, 0x2B, 0xFF, 0xFD, 0xC3, 0x74, 0x03, 0x9D,
++0xFD, 0xE4, 0x94, 0x00, 0xFC, 0x74, 0xEB, 0x2D, 0xF5, 0x82, 0x74, 0x8A, 0x3C, 0xF5, 0x83, 0xE0,
++0xFE, 0xEF, 0xFD, 0x90, 0x8A, 0xEA, 0xE0, 0x2D, 0xFD, 0x90, 0x8A, 0xE9, 0xE0, 0x34, 0x00, 0x8D,
++0x82, 0xF5, 0x83, 0xEE, 0xF0, 0x90, 0x8A, 0xE4, 0xE0, 0x04, 0xF0, 0x80, 0x8C, 0xC3, 0x90, 0x8A,
++0xE9, 0xE0, 0x94, 0x10, 0x40, 0x02, 0x01, 0xD7, 0x90, 0x8A, 0xE8, 0xE0, 0x64, 0x04, 0x60, 0x02,
++0x01, 0xD7, 0x90, 0x8A, 0xEC, 0xE0, 0xFF, 0xE4, 0xFC, 0xFD, 0xFE, 0x78, 0x10, 0x12, 0x2A, 0x6C,
++0xC0, 0x04, 0xC0, 0x05, 0xC0, 0x06, 0xC0, 0x07, 0x90, 0x8A, 0xEB, 0xE0, 0xFF, 0xE4, 0xFC, 0xFD,
++0xFE, 0x78, 0x18, 0x12, 0x2A, 0x6C, 0xD0, 0x03, 0xD0, 0x02, 0xD0, 0x01, 0xD0, 0x00, 0x12, 0x43,
++0x46, 0xC0, 0x04, 0xC0, 0x05, 0xC0, 0x06, 0xC0, 0x07, 0x90, 0x8A, 0xED, 0xE0, 0xFF, 0xE4, 0xFC,
++0xFD, 0xFE, 0x78, 0x08, 0x12, 0x2A, 0x6C, 0xD0, 0x03, 0xD0, 0x02, 0xD0, 0x01, 0xD0, 0x00, 0x12,
++0x43, 0x46, 0xA8, 0x04, 0xA9, 0x05, 0xAA, 0x06, 0xAB, 0x07, 0xA3, 0xE0, 0xFF, 0xE4, 0xFC, 0xFD,
++0xFE, 0x12, 0x43, 0x46, 0xA3, 0x12, 0x2A, 0x7F, 0x90, 0x8A, 0xEF, 0x12, 0x43, 0x53, 0x90, 0x80,
++0x85, 0x12, 0x2A, 0x7F, 0x90, 0x8A, 0xE9, 0xE0, 0xFE, 0xA3, 0xE0, 0xFF, 0x12, 0x2F, 0xD9, 0x80,
++0x36, 0x90, 0x8A, 0xED, 0xE0, 0xFE, 0xA3, 0xE0, 0x24, 0x00, 0xFF, 0xE4, 0x3E, 0xFE, 0x90, 0x8A,
++0xE6, 0xF0, 0xA3, 0xEF, 0xF0, 0x12, 0x37, 0x54, 0x80, 0x1D, 0x90, 0x8A, 0xED, 0xE0, 0xFE, 0xA3,
++0xE0, 0x24, 0x00, 0xFF, 0xE4, 0x3E, 0xFE, 0x90, 0x8A, 0xE6, 0xF0, 0xA3, 0xEF, 0xF0, 0x12, 0x36,
++0xCB, 0x80, 0x04, 0x7F, 0x00, 0x80, 0x02, 0x7F, 0x01, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0xD3, 0x10,
++0xAF, 0x01, 0xC3, 0xC0, 0xD0, 0xE4, 0x90, 0x8A, 0xDD, 0xF0, 0xA3, 0x74, 0x04, 0xF0, 0xA3, 0xE4,
++0xF0, 0x90, 0x8A, 0xE2, 0xF0, 0xA3, 0xF0, 0x90, 0x02, 0x09, 0xE0, 0x90, 0x8A, 0xE1, 0xF0, 0x12,
++0x29, 0xD9, 0xFF, 0x90, 0x8A, 0xE1, 0xE0, 0x2F, 0x90, 0x8A, 0xE0, 0xF0, 0x30, 0xE0, 0x0B, 0x90,
++0x8A, 0xDB, 0xE4, 0xF0, 0xA3, 0x74, 0x80, 0xF0, 0x80, 0x07, 0xE4, 0x90, 0x8A, 0xDB, 0xF0, 0xA3,
++0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0xC3, 0x13, 0x90, 0xFD, 0x10, 0xF0, 0x90, 0x8A, 0xDD, 0xE0, 0x24,
++0x20, 0xF0, 0x90, 0x8A, 0xDB, 0xA3, 0xE0, 0xFD, 0xA3, 0xE0, 0xFC, 0x2D, 0xFF, 0x24, 0x01, 0xF5,
++0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0x90, 0x8A, 0xFD, 0xF0, 0x74, 0x02, 0x2F, 0xF5, 0x82,
++0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0xFE, 0xEC, 0x2D, 0x24, 0x03, 0xF5, 0x82, 0xE4, 0x34, 0xFC,
++0xF5, 0x83, 0xE0, 0x24, 0x00, 0xFF, 0xE4, 0x3E, 0x90, 0x8A, 0xFE, 0xF0, 0xA3, 0xEF, 0xF0, 0x90,
++0x8A, 0xDA, 0x74, 0x04, 0xF0, 0x90, 0x8A, 0xDB, 0xA3, 0xE0, 0xFF, 0xA3, 0xE0, 0x2F, 0xFF, 0x90,
++0x8A, 0xDA, 0xE0, 0xFE, 0x2F, 0x24, 0x00, 0xF5, 0x82, 0xE4, 0x34, 0xFC, 0xF5, 0x83, 0xE0, 0xFF,
++0x74, 0xFC, 0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x8A, 0xF5, 0x83, 0xEF, 0xF0, 0x90, 0x8A, 0xDA, 0xE0,
++0x04, 0xF0, 0xE0, 0xB4, 0x08, 0xCF, 0x12, 0x76, 0xF2, 0xEF, 0x70, 0x45, 0x90, 0x01, 0xC3, 0xE0,
++0x60, 0x2B, 0xC3, 0x90, 0x8A, 0xE3, 0xE0, 0x94, 0xE8, 0x90, 0x8A, 0xE2, 0xE0, 0x94, 0x03, 0x40,
++0x09, 0x90, 0x01, 0xC6, 0xE0, 0x44, 0x10, 0xF0, 0x80, 0x79, 0x90, 0x8A, 0xE2, 0xE4, 0x75, 0xF0,
++0x01, 0x12, 0x42, 0x81, 0x7F, 0x0A, 0x7E, 0x00, 0x12, 0x37, 0x54, 0x80, 0xCF, 0x90, 0x01, 0xC6,
++0xE0, 0x90, 0x01, 0xC3, 0x30, 0xE2, 0x05, 0x74, 0xFE, 0xF0, 0x80, 0x57, 0x74, 0xFF, 0xF0, 0x80,
++0x52, 0x90, 0x8A, 0xDD, 0xE0, 0xB4, 0x78, 0x2E, 0xE4, 0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0x04, 0xF0,
++0x90, 0x8A, 0xDB, 0xE0, 0x70, 0x04, 0xA3, 0xE0, 0x64, 0x80, 0x90, 0x8A, 0xDB, 0x70, 0x05, 0xF0,
++0xA3, 0xF0, 0x80, 0x06, 0xE4, 0xF0, 0xA3, 0x74, 0x80, 0xF0, 0x90, 0x8A, 0xE0, 0xE0, 0xC3, 0x13,
++0x90, 0xFD, 0x10, 0xF0, 0x80, 0x07, 0x90, 0x8A, 0xDD, 0xE0, 0x24, 0x08, 0xF0, 0x90, 0x8A, 0xDE,
++0x74, 0xFF, 0xF5, 0xF0, 0x12, 0x42, 0x81, 0x90, 0x8A, 0xDE, 0xE0, 0x70, 0x02, 0xA3, 0xE0, 0x60,
++0x02, 0x21, 0x32, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x12, 0x29, 0xD9, 0x90, 0x8B, 0x05, 0xF0, 0x90,
++0x00, 0x01, 0x12, 0x42, 0x20, 0x90, 0x8B, 0x06, 0xF0, 0x22, 0xE4, 0xF5, 0x61, 0x22, 0x51, 0x67,
++0x90, 0x8B, 0x33, 0x74, 0x02, 0xF0, 0x22, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x7F, 0x78, 0x7E,
++0x08, 0x12, 0x27, 0xDE, 0x90, 0x8B, 0x1C, 0x12, 0x2A, 0x7F, 0x7F, 0x04, 0x7E, 0x0C, 0x12, 0x27,
++0xDE, 0x90, 0x8B, 0x20, 0x12, 0x2A, 0x7F, 0x7F, 0x00, 0x7E, 0x08, 0x12, 0x27, 0xDE, 0x90, 0x8B,
++0x24, 0x12, 0x2A, 0x7F, 0x90, 0x8B, 0x09, 0xE0, 0x90, 0x8B, 0x1C, 0xB4, 0x01, 0x0D, 0x12, 0x43,
++0x53, 0xEF, 0x54, 0xC7, 0xFF, 0xED, 0x54, 0xC7, 0xFD, 0x80, 0x07, 0x12, 0x43, 0x53, 0xEF, 0x54,
++0xC7, 0xFF, 0xEC, 0x90, 0x80, 0x85, 0x12, 0x2A, 0x7F, 0x7F, 0x78, 0x7E, 0x08, 0x12, 0x2F, 0xD9,
++0x90, 0x8B, 0x20, 0x12, 0x43, 0x53, 0xEF, 0x54, 0x0F, 0xFF, 0xEC, 0x90, 0x80, 0x85, 0x12, 0x2A,
++0x7F, 0x7F, 0x04, 0x7E, 0x0C, 0x12, 0x2F, 0xD9, 0x90, 0x8B, 0x24, 0x12, 0x43, 0x53, 0xEF, 0x44,
++0x02, 0xFF, 0xEC, 0x90, 0x80, 0x85, 0x12, 0x2A, 0x7F, 0x7F, 0x00, 0x7E, 0x08, 0x12, 0x2F, 0xD9,
++0x7F, 0x70, 0x7E, 0x0E, 0x12, 0x27, 0xDE, 0x90, 0x8B, 0x28, 0x12, 0x2A, 0x7F, 0x90, 0x80, 0x85,
++0x12, 0x2A, 0x8B, 0x00, 0x1B, 0x25, 0xA0, 0x7F, 0x70, 0x7E, 0x0E, 0x12, 0x2F, 0xD9, 0x90, 0x80,
++0x59, 0x12, 0x2A, 0x8B, 0x00, 0x00, 0x00, 0x00, 0xE4, 0xFD, 0xFF, 0x12, 0x34, 0x81, 0x90, 0x8B,
++0x09, 0xE0, 0xB4, 0x01, 0x11, 0x90, 0x80, 0x59, 0x12, 0x2A, 0x8B, 0x00, 0x00, 0x00, 0x00, 0xE4,
++0xFD, 0x7F, 0x01, 0x12, 0x34, 0x81, 0x22, 0x51, 0x6D, 0x90, 0x8B, 0x33, 0x74, 0x02, 0xF0, 0x22,
++0x51, 0x67, 0x90, 0x8B, 0x2D, 0x74, 0x04, 0xF0, 0x22, 0xD3, 0x10, 0xAF, 0x01, 0xC3, 0xC0, 0xD0,
++0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0x6F, 0x70, 0x02, 0xA1, 0x15, 0xEF, 0x12, 0x43, 0x94, 0x7B, 0x77,
++0x00, 0x7B, 0xB1, 0x01, 0x7B, 0xF7, 0x02, 0x7C, 0x31, 0x03, 0x7C, 0x69, 0x04, 0x7C, 0xA2, 0x05,
++0x7C, 0xDD, 0x06, 0x00, 0x00, 0x7D, 0x15, 0xEE, 0xB4, 0x04, 0x06, 0x7F, 0x01, 0xB1, 0x48, 0xA1,
++0x15, 0x90, 0x8B, 0x2D, 0xE0, 0xFF, 0xB4, 0x05, 0x04, 0xB1, 0x24, 0xA1, 0x15, 0xEF, 0xB4, 0x06,
++0x06, 0x7F, 0x01, 0xB1, 0x39, 0x80, 0x16, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x03, 0x06, 0x7F, 0x01,
++0xB1, 0x1A, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02, 0x02, 0xB1, 0x2E, 0xB1, 0x6B, 0xA1,
++0x15, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04, 0x06, 0x7F, 0x01, 0xB1, 0x48, 0x80, 0x09, 0x90, 0x8B,
++0x2D, 0xE0, 0xB4, 0x05, 0x02, 0xB1, 0x24, 0x90, 0x8B, 0x2D, 0xE0, 0x70, 0x04, 0xB1, 0x61, 0xA1,
++0x15, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0xB4, 0x06, 0x06, 0x7F, 0x01, 0xB1, 0x39, 0xA1, 0x15, 0xEE,
++0xB4, 0x03, 0x06, 0x7F, 0x01, 0xB1, 0x1A, 0xA1, 0x15, 0x90, 0x8B, 0x2D, 0xE0, 0x64, 0x02, 0x60,
++0x02, 0xA1, 0x15, 0xB1, 0x2E, 0xA1, 0x15, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04, 0x06, 0x7F, 0x01,
++0xB1, 0x48, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x02, 0xB1, 0x24, 0x90, 0x8B, 0x2D,
++0xE0, 0x70, 0x04, 0xB1, 0x61, 0x80, 0x16, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0xB4, 0x06, 0x06, 0x7F,
++0x01, 0xB1, 0x39, 0x80, 0x08, 0xEE, 0xB4, 0x03, 0x04, 0x7F, 0x01, 0xB1, 0x1A, 0xB1, 0x8D, 0xA1,
++0x15, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x04, 0x06, 0x7F, 0x01, 0xB1, 0x48, 0x80, 0x09, 0x90, 0x8B,
++0x2D, 0xE0, 0xB4, 0x05, 0x02, 0xB1, 0x24, 0x90, 0x8B, 0x2D, 0xE0, 0x70, 0x04, 0xB1, 0x61, 0x80,
++0x14, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0xB4, 0x06, 0x06, 0xE4, 0xFF, 0xB1, 0x39, 0x80, 0x06, 0xEE,
++0xB4, 0x02, 0x02, 0xB1, 0x2E, 0xB1, 0x76, 0xA1, 0x15, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0xB4, 0x06,
++0x06, 0xE4, 0xFF, 0xB1, 0x39, 0x80, 0x13, 0xEE, 0xB4, 0x03, 0x06, 0x7F, 0x01, 0xB1, 0x1A, 0x80,
++0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02, 0x02, 0xB1, 0x2E, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x01,
++0x04, 0xB1, 0x6B, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05, 0x02, 0xB1, 0x24, 0x71, 0x40,
++0x80, 0x73, 0x90, 0x8B, 0x2D, 0xE0, 0xFE, 0xB4, 0x06, 0x06, 0xE4, 0xFF, 0xB1, 0x39, 0x80, 0x13,
++0xEE, 0xB4, 0x03, 0x06, 0x7F, 0x01, 0xB1, 0x1A, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02,
++0x02, 0xB1, 0x2E, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x01, 0x04, 0xB1, 0x6B, 0x80, 0x0B, 0x90, 0x8B,
++0x2D, 0xE0, 0xB4, 0x04, 0x04, 0x7F, 0x01, 0xB1, 0x48, 0xB1, 0x80, 0x80, 0x38, 0x90, 0x8B, 0x2D,
++0xE0, 0xB4, 0x04, 0x06, 0x7F, 0x01, 0xB1, 0x48, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x05,
++0x02, 0xB1, 0x24, 0x90, 0x8B, 0x2D, 0xE0, 0x70, 0x04, 0xB1, 0x61, 0x80, 0x16, 0x90, 0x8B, 0x2D,
++0xE0, 0xB4, 0x03, 0x06, 0xE4, 0xFF, 0xB1, 0x1A, 0x80, 0x09, 0x90, 0x8B, 0x2D, 0xE0, 0xB4, 0x02,
++0x02, 0xB1, 0x2E, 0xB1, 0x9A, 0xD0, 0xD0, 0x92, 0xAF, 0x22, 0x12, 0x4A, 0xB2, 0x90, 0x8B, 0x2D,
++0x74, 0x01, 0xF0, 0x22, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x2D, 0xF0, 0x22, 0x90, 0x05,
++0x22, 0xE4, 0xF0, 0x90, 0x8B, 0x2D, 0x04, 0xF0, 0x22, 0xEF, 0x60, 0x05, 0x90, 0x05, 0x22, 0xE4,
++0xF0, 0x90, 0x8B, 0x2D, 0x74, 0x01, 0xF0, 0x22, 0x90, 0x8B, 0x56, 0xEF, 0xF0, 0x12, 0x4F, 0xED,
++0x90, 0x8B, 0x56, 0xE0, 0x60, 0x05, 0x90, 0x05, 0x22, 0xE4, 0xF0, 0xE4, 0x90, 0x8B, 0x2D, 0xF0,
++0x22, 0x12, 0x4A, 0xCC, 0x90, 0x8B, 0x2D, 0x74, 0x01, 0xF0, 0x22, 0x7F, 0x01, 0x12, 0x4A, 0x7C,
++0xE4, 0x90, 0x8B, 0x2D, 0xF0, 0x22, 0x12, 0x4A, 0x32, 0x90, 0x8B, 0x2D, 0x74, 0x03, 0xF0, 0x22,
++0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x90, 0x8B, 0x2D, 0x74, 0x05, 0xF0, 0x22, 0x90, 0x05, 0x22,
++0x74, 0xFF, 0xF0, 0x90, 0x8B, 0x2D, 0x74, 0x02, 0xF0, 0x22, 0x90, 0x05, 0x22, 0x74, 0x6F, 0xF0,
++0x90, 0x8B, 0x2D, 0x74, 0x06, 0xF0, 0x22, 0x90, 0x05, 0x22, 0x74, 0xFF, 0xF0, 0x90, 0x8B, 0x33,
++0x74, 0x04, 0xF0, 0x22, 0x12, 0x4F, 0xED, 0x90, 0x8B, 0x33, 0x74, 0x04, 0xF0, 0x22, 0x90, 0x01,
++0x57, 0xE0, 0x60, 0x3C, 0x90, 0x01, 0x57, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x02, 0xF0, 0x90,
++0x8B, 0x1B, 0xE0, 0x60, 0x07, 0xE4, 0xF0, 0x53, 0x25, 0xFD, 0x80, 0x24, 0x90, 0x8B, 0x0C, 0xE0,
++0x04, 0xF0, 0x53, 0x25, 0xEF, 0x90, 0x8B, 0x10, 0xE0, 0xFF, 0x90, 0x8B, 0x0C, 0xE0, 0xD3, 0x9F,
++0x40, 0x0E, 0xE5, 0x21, 0xB4, 0x01, 0x09, 0x90, 0x8B, 0x0D, 0xE0, 0x70, 0x03, 0xE0, 0x04, 0xF0,
++0x90, 0x01, 0x5B, 0xE0, 0x60, 0x10, 0x90, 0x01, 0x5B, 0xE4, 0xF0, 0x90, 0x01, 0x3C, 0x74, 0x04,
++0xF0, 0xE4, 0x90, 0x8B, 0x18, 0xF0, 0x90, 0x01, 0x5F, 0xE0, 0x60, 0x10, 0x90, 0x01, 0x5F, 0xE4,
++0xF0, 0x90, 0x01, 0x3C, 0x74, 0x08, 0xF0, 0xE4, 0x90, 0x8B, 0x17, 0xF0, 0x22, 0xE4, 0x90, 0x8B,
++0x4F, 0xF0, 0xA3, 0xF0, 0x90, 0x05, 0xF8, 0xE0, 0x70, 0x0F, 0xA3, 0xE0, 0x70, 0x0B, 0xA3, 0xE0,
++0x70, 0x07, 0xA3, 0xE0, 0x70, 0x03, 0x7F, 0x01, 0x22, 0xD3, 0x90, 0x8B, 0x50, 0xE0, 0x94, 0xE8,
++0x90, 0x8B, 0x4F, 0xE0, 0x94, 0x03, 0x40, 0x03, 0x7F, 0x00, 0x22, 0x7F, 0x32, 0x7E, 0x00, 0x12,
++0x37, 0x54, 0x90, 0x8B, 0x4F, 0xE4, 0x75, 0xF0, 0x01, 0x12, 0x42, 0x81, 0x80, 0xC6, 0x8F, 0x0F,
++0xE4, 0x90, 0x8A, 0xF3, 0xF0, 0xE5, 0x0F, 0x14, 0xFE, 0x90, 0x8A, 0xF3, 0xE0, 0xFF, 0xC3, 0x9E,
++0x50, 0x0E, 0xEF, 0x04, 0xFD, 0x12, 0x34, 0xB7, 0x90, 0x8A, 0xF3, 0xE0, 0x04, 0xF0, 0x80, 0xE5,
++0xE5, 0x0F, 0x14, 0xFF, 0x7D, 0xFF, 0x12, 0x34, 0xB7, 0x90, 0x8A, 0xF3, 0xE5, 0x0F, 0xF0, 0x90,
++0x8A, 0xF3, 0xE0, 0xC3, 0x94, 0xFF, 0x50, 0x0F, 0xE0, 0xFF, 0x04, 0xFD, 0x12, 0x34, 0xB7, 0x90,
++0x8A, 0xF3, 0xE0, 0x04, 0xF0, 0x80, 0xE8, 0xAD, 0x0F, 0x7F, 0xFF, 0x02, 0x34, 0xB7, 0xDC, 0xD3,
++};
++#endif
++
++//8188C_Formal_All_PHYforMP_111117	2011-11-23
++//8192C_Formal_92CU_PHYforMP_110817 	2011-11-23
++
++u32 Rtl8192CUPHY_REG_2TArray[PHY_REG_2TArrayLength] = {
++0x024,0x0011800f,
++0x028,0x00ffdb83,
++0x800,0x80040002,
++0x804,0x00000003,
++0x808,0x0000fc00,
++0x80c,0x0000000a,
++0x810,0x10000330, //for Broadcom AP IOT
++0x814,0x020c3d10,
++0x818,0x02200385,
++0x81c,0x00000000,
++0x820,0x01000100,
++0x824,0x00390004,
++0x828,0x01000100,
++0x82c,0x00390004,
++0x830,0x27272727,
++0x834,0x27272727,
++0x838,0x27272727,
++0x83c,0x27272727,
++0x840,0x00010000,
++0x844,0x00010000,
++0x848,0x27272727,
++0x84c,0x27272727,
++0x850,0x00000000,
++0x854,0x00000000,
++0x858,0x569a569a,
++0x85c,0x0c1b25a4,
++0x860,0x66e60230,
++0x864,0x061f0130,
++0x868,0x27272727,
++0x86c,0x2b2b2b27,
++0x870,0x07000700,
++0x874,0x22184000,
++0x878,0x08080808,
++0x87c,0x00000000,
++0x880,0xc0083070,
++0x884,0x000004d5,
++0x888,0x00000000,
++0x88c,0xcc0000c0,
++0x890,0x00000800,
++0x894,0xfffffffe,
++0x898,0x40302010,
++0x89c,0x00706050,
++0x900,0x00000000,
++0x904,0x00000023,
++0x908,0x00000000,
++0x90c,0x81121313,
++0xa00,0x00d047c8,
++0xa04,0x80ff000c,
++0xa08,0x8c838300,
++0xa0c,0x2e68120f,
++0xa10,0x9500bb78,
++0xa14,0x11144028,
++0xa18,0x00881117,
++0xa1c,0x89140f00,
++0xa20,0x1a1b0000,
++0xa24,0x090e1317,
++0xa28,0x00000204,
++0xa2c,0x00d30000,
++0xa70,0x101fbf00,
++0xa74,0x00000007,
++0xc00,0x48071d40,
++0xc04,0x03a05633,
++0xc08,0x000000e4,
++0xc0c,0x6c6c6c6c,
++0xc10,0x08800000,
++0xc14,0x40000100,
++0xc18,0x08800000,
++0xc1c,0x40000100,
++0xc20,0x00000000,
++0xc24,0x00000000,
++0xc28,0x00000000,
++0xc2c,0x00000000,
++0xc30,0x69e9ac44,
++0xc34,0x469652cf,
++0xc38,0x49795994,
++0xc3c,0x0a97971c,
++0xc40,0x1f7c403f,
++0xc44,0x000100b7,
++0xc48,0xec020107,
++0xc4c,0x007f037f,
++0xc50,0x69543420,
++0xc54,0x43bc0094,
++0xc58,0x69543420,
++0xc5c,0x433c0094,
++0xc60,0x00000000,
++0xc64,0x5116848b,
++0xc68,0x47c00bff,
++0xc6c,0x00000036,
++0xc70,0x2c7f000d,
++0xc74,0x2186115b,
++0xc78,0x0000001f,
++0xc7c,0x00b99612,
++0xc80,0x40000100,
++0xc84,0x20f60000,
++0xc88,0x40000100,
++0xc8c,0xa0e40000,
++0xc90,0x00121820,
++0xc94,0x00000000,
++0xc98,0x00121820,
++0xc9c,0x00007f7f,
++0xca0,0x00000000,
++0xca4,0x00000080,
++0xca8,0x00000000,
++0xcac,0x00000000,
++0xcb0,0x00000000,
++0xcb4,0x00000000,
++0xcb8,0x00000000,
++0xcbc,0x28000000,
++0xcc0,0x00000000,
++0xcc4,0x00000000,
++0xcc8,0x00000000,
++0xccc,0x00000000,
++0xcd0,0x00000000,
++0xcd4,0x00000000,
++0xcd8,0x64b22427,
++0xcdc,0x00766932,
++0xce0,0x00222222,
++0xce4,0x00000000,
++0xce8,0x37644302,
++0xcec,0x2f97d40c,
++0xd00,0x00080740,
++0xd04,0x00020403,
++0xd08,0x0000907f,
++0xd0c,0x20010201,
++0xd10,0xa0633333,
++0xd14,0x3333bc43,
++0xd18,0x7a8f5b6b,
++0xd2c,0xcc979975,
++0xd30,0x00000000,
++0xd34,0x80608000,
++0xd38,0x00000000,
++0xd3c,0x00027293,
++0xd40,0x00000000,
++0xd44,0x00000000,
++0xd48,0x00000000,
++0xd4c,0x00000000,
++0xd50,0x6437140a,
++0xd54,0x00000000,
++0xd58,0x00000000,
++0xd5c,0x30032064,
++0xd60,0x4653de68,
++0xd64,0x04518a3c,
++0xd68,0x00002101,
++0xd6c,0x2a201c16,
++0xd70,0x1812362e,
++0xd74,0x322c2220,
++0xd78,0x000e3c24,
++0xe00,0x2a2a2a2a,
++0xe04,0x2a2a2a2a,
++0xe08,0x03902a2a,
++0xe10,0x2a2a2a2a,
++0xe14,0x2a2a2a2a,
++0xe18,0x2a2a2a2a,
++0xe1c,0x2a2a2a2a,
++0xe28,0x00000000,
++0xe30,0x1000dc1f,
++0xe34,0x10008c1f,
++0xe38,0x02140102,
++0xe3c,0x681604c2,
++0xe40,0x01007c00,
++0xe44,0x01004800,
++0xe48,0xfb000000,
++0xe4c,0x000028d1,
++0xe50,0x1000dc1f,
++0xe54,0x10008c1f,
++0xe58,0x02140102,
++0xe5c,0x28160d05,
++0xe60,0x00000010,
++0xe68,0x001b25a4,
++0xe6c,0x63db25a4,
++0xe70,0x63db25a4,
++0xe74,0x0c1b25a4,
++0xe78,0x0c1b25a4,
++0xe7c,0x0c1b25a4,
++0xe80,0x0c1b25a4,
++0xe84,0x63db25a4,
++0xe88,0x0c1b25a4,
++0xe8c,0x63db25a4,
++0xed0,0x63db25a4,
++0xed4,0x63db25a4,
++0xed8,0x63db25a4,
++0xedc,0x001b25a4,
++0xee0,0x001b25a4,
++0xeec,0x6fdb25a4,
++0xf14,0x00000003,
++0xf4c,0x00000000,
++0xf00,0x00000300,
++};
++
++u32 Rtl8192CUPHY_REG_1TArray[PHY_REG_1TArrayLength] = {
++0x024,0x0011800f,
++0x028,0x00ffdb83,
++0x800,0x80040000,
++0x804,0x00000001,
++0x808,0x0000fc00,
++0x80c,0x0000000a,
++0x810,0x10000330, //for Broadcom AP IOT
++0x814,0x020c3d10,
++0x818,0x02200385,
++0x81c,0x00000000,
++0x820,0x01000100,
++0x824,0x00390004,
++0x828,0x00000000,
++0x82c,0x00000000,
++0x830,0x00000000,
++0x834,0x00000000,
++0x838,0x00000000,
++0x83c,0x00000000,
++0x840,0x00010000,
++0x844,0x00000000,
++0x848,0x00000000,
++0x84c,0x00000000,
++0x850,0x00000000,
++0x854,0x00000000,
++0x858,0x569a569a,
++0x85c,0x001b25a4,
++0x860,0x66e60230,
++0x864,0x061f0130,
++0x868,0x00000000,
++0x86c,0x32323200,
++0x870,0x07000700,
++0x874,0x22004000,
++0x878,0x00000808,
++0x87c,0x00000000,
++0x880,0xc0083070,
++0x884,0x000004d5,
++0x888,0x00000000,
++0x88c,0xccc000c0,
++0x890,0x00000800,
++0x894,0xfffffffe,
++0x898,0x40302010,
++0x89c,0x00706050,
++0x900,0x00000000,
++0x904,0x00000023,
++0x908,0x00000000,
++0x90c,0x81121111,
++0xa00,0x00d047c8,
++0xa04,0x80ff000c,
++0xa08,0x8c838300,
++0xa0c,0x2e68120f,
++0xa10,0x9500bb78,
++0xa14,0x11144028,
++0xa18,0x00881117,
++0xa1c,0x89140f00,
++0xa20,0x1a1b0000,
++0xa24,0x090e1317,
++0xa28,0x00000204,
++0xa2c,0x00d30000,
++0xa70,0x101fbf00,
++0xa74,0x00000007,
++0xc00,0x48071d40,
++0xc04,0x03a05611,
++0xc08,0x000000e4,
++0xc0c,0x6c6c6c6c,
++0xc10,0x08800000,
++0xc14,0x40000100,
++0xc18,0x08800000,
++0xc1c,0x40000100,
++0xc20,0x00000000,
++0xc24,0x00000000,
++0xc28,0x00000000,
++0xc2c,0x00000000,
++0xc30,0x69e9ac44,
++0xc34,0x469652cf,
++0xc38,0x49795994,
++0xc3c,0x0a97971c,
++0xc40,0x1f7c403f,
++0xc44,0x000100b7,
++0xc48,0xec020107,
++0xc4c,0x007f037f,
++0xc50,0x69543420,
++0xc54,0x43bc0094,
++0xc58,0x69543420,
++0xc5c,0x433c0094,
++0xc60,0x00000000,
++0xc64,0x5116848b,
++0xc68,0x47c00bff,
++0xc6c,0x00000036,
++0xc70,0x2c7f000d,
++0xc74,0x018610db,
++0xc78,0x0000001f,
++0xc7c,0x00b91612,
++0xc80,0x40000100,
++0xc84,0x20f60000,
++0xc88,0x40000100,
++0xc8c,0x20200000,
++0xc90,0x00121820,
++0xc94,0x00000000,
++0xc98,0x00121820,
++0xc9c,0x00007f7f,
++0xca0,0x00000000,
++0xca4,0x00000080,
++0xca8,0x00000000,
++0xcac,0x00000000,
++0xcb0,0x00000000,
++0xcb4,0x00000000,
++0xcb8,0x00000000,
++0xcbc,0x28000000,
++0xcc0,0x00000000,
++0xcc4,0x00000000,
++0xcc8,0x00000000,
++0xccc,0x00000000,
++0xcd0,0x00000000,
++0xcd4,0x00000000,
++0xcd8,0x64b22427,
++0xcdc,0x00766932,
++0xce0,0x00222222,
++0xce4,0x00000000,
++0xce8,0x37644302,
++0xcec,0x2f97d40c,
++0xd00,0x00000740,
++0xd04,0x00020401,
++0xd08,0x0000907f,
++0xd0c,0x20010201,
++0xd10,0xa0633333,
++0xd14,0x3333bc43,
++0xd18,0x7a8f5b6b,
++0xd2c,0xcc979975,
++0xd30,0x00000000,
++0xd34,0x80608000,
++0xd38,0x00000000,
++0xd3c,0x00027293,
++0xd40,0x00000000,
++0xd44,0x00000000,
++0xd48,0x00000000,
++0xd4c,0x00000000,
++0xd50,0x6437140a,
++0xd54,0x00000000,
++0xd58,0x00000000,
++0xd5c,0x30032064,
++0xd60,0x4653de68,
++0xd64,0x04518a3c,
++0xd68,0x00002101,
++0xd6c,0x2a201c16,
++0xd70,0x1812362e,
++0xd74,0x322c2220,
++0xd78,0x000e3c24,
++0xe00,0x2a2a2a2a,
++0xe04,0x2a2a2a2a,
++0xe08,0x03902a2a,
++0xe10,0x2a2a2a2a,
++0xe14,0x2a2a2a2a,
++0xe18,0x2a2a2a2a,
++0xe1c,0x2a2a2a2a,
++0xe28,0x00000000,
++0xe30,0x1000dc1f,
++0xe34,0x10008c1f,
++0xe38,0x02140102,
++0xe3c,0x681604c2,
++0xe40,0x01007c00,
++0xe44,0x01004800,
++0xe48,0xfb000000,
++0xe4c,0x000028d1,
++0xe50,0x1000dc1f,
++0xe54,0x10008c1f,
++0xe58,0x02140102,
++0xe5c,0x28160d05,
++0xe60,0x00000008,
++0xe68,0x001b25a4,
++0xe6c,0x631b25a0,
++0xe70,0x631b25a0,
++0xe74,0x081b25a0,
++0xe78,0x081b25a0,
++0xe7c,0x081b25a0,
++0xe80,0x081b25a0,
++0xe84,0x631b25a0,
++0xe88,0x081b25a0,
++0xe8c,0x631b25a0,
++0xed0,0x631b25a0,
++0xed4,0x631b25a0,
++0xed8,0x631b25a0,
++0xedc,0x001b25a0,
++0xee0,0x001b25a0,
++0xeec,0x6b1b25a0,
++0xf14,0x00000003,
++0xf4c,0x00000000,
++0xf00,0x00000300,
++};
++
++u32 Rtl8192CUPHY_ChangeTo_1T1RArray[PHY_ChangeTo_1T1RArrayLength] = {
++0x0, };
++
++u32 Rtl8192CUPHY_ChangeTo_1T2RArray[PHY_ChangeTo_1T2RArrayLength] = {
++0x0, };
++
++u32 Rtl8192CUPHY_ChangeTo_2T2RArray[PHY_ChangeTo_2T2RArrayLength] = {
++0x0, };
++
++u32 Rtl8192CUPHY_REG_Array_PG[PHY_REG_Array_PGLength] = {
++0xe00,0xffffffff,0x07090c0c,
++0xe04,0xffffffff,0x01020405,
++0xe08,0x0000ff00,0x00000000,
++0x86c,0xffffff00,0x00000000,
++0xe10,0xffffffff,0x0b0c0c0e,
++0xe14,0xffffffff,0x01030506,
++0xe18,0xffffffff,0x0b0c0d0e,
++0xe1c,0xffffffff,0x01030509,
++0x830,0xffffffff,0x07090c0c,
++0x834,0xffffffff,0x01020405,
++0x838,0xffffff00,0x00000000,
++0x86c,0x000000ff,0x00000000,
++0x83c,0xffffffff,0x0b0c0d0e,
++0x848,0xffffffff,0x01030509,
++0x84c,0xffffffff,0x0b0c0d0e,
++0x868,0xffffffff,0x01030509,
++0xe00,0xffffffff,0x00000000,
++0xe04,0xffffffff,0x00000000,
++0xe08,0x0000ff00,0x00000000,
++0x86c,0xffffff00,0x00000000,
++0xe10,0xffffffff,0x00000000,
++0xe14,0xffffffff,0x00000000,
++0xe18,0xffffffff,0x00000000,
++0xe1c,0xffffffff,0x00000000,
++0x830,0xffffffff,0x00000000,
++0x834,0xffffffff,0x00000000,
++0x838,0xffffff00,0x00000000,
++0x86c,0x000000ff,0x00000000,
++0x83c,0xffffffff,0x00000000,
++0x848,0xffffffff,0x00000000,
++0x84c,0xffffffff,0x00000000,
++0x868,0xffffffff,0x00000000,
++0xe00,0xffffffff,0x04040404,
++0xe04,0xffffffff,0x00020204,
++0xe08,0x0000ff00,0x00000000,
++0x86c,0xffffff00,0x00000000,
++0xe10,0xffffffff,0x06060606,
++0xe14,0xffffffff,0x00020406,
++0xe18,0xffffffff,0x00000000,
++0xe1c,0xffffffff,0x00000000,
++0x830,0xffffffff,0x04040404,
++0x834,0xffffffff,0x00020204,
++0x838,0xffffff00,0x00000000,
++0x86c,0x000000ff,0x00000000,
++0x83c,0xffffffff,0x06060606,
++0x848,0xffffffff,0x00020406,
++0x84c,0xffffffff,0x00000000,
++0x868,0xffffffff,0x00000000,
++0xe00,0xffffffff,0x00000000,
++0xe04,0xffffffff,0x00000000,
++0xe08,0x0000ff00,0x00000000,
++0x86c,0xffffff00,0x00000000,
++0xe10,0xffffffff,0x00000000,
++0xe14,0xffffffff,0x00000000,
++0xe18,0xffffffff,0x00000000,
++0xe1c,0xffffffff,0x00000000,
++0x830,0xffffffff,0x00000000,
++0x834,0xffffffff,0x00000000,
++0x838,0xffffff00,0x00000000,
++0x86c,0x000000ff,0x00000000,
++0x83c,0xffffffff,0x00000000,
++0x848,0xffffffff,0x00000000,
++0x84c,0xffffffff,0x00000000,
++0x868,0xffffffff,0x00000000,
++0xe00,0xffffffff,0x00000000,
++0xe04,0xffffffff,0x00000000,
++0xe08,0x0000ff00,0x00000000,
++0x86c,0xffffff00,0x00000000,
++0xe10,0xffffffff,0x00000000,
++0xe14,0xffffffff,0x00000000,
++0xe18,0xffffffff,0x00000000,
++0xe1c,0xffffffff,0x00000000,
++0x830,0xffffffff,0x00000000,
++0x834,0xffffffff,0x00000000,
++0x838,0xffffff00,0x00000000,
++0x86c,0x000000ff,0x00000000,
++0x83c,0xffffffff,0x00000000,
++0x848,0xffffffff,0x00000000,
++0x84c,0xffffffff,0x00000000,
++0x868,0xffffffff,0x00000000,
++0xe00,0xffffffff,0x04040404,
++0xe04,0xffffffff,0x00020204,
++0xe08,0x0000ff00,0x00000000,
++0x86c,0xffffff00,0x00000000,
++0xe10,0xffffffff,0x00000000,
++0xe14,0xffffffff,0x00000000,
++0xe18,0xffffffff,0x00000000,
++0xe1c,0xffffffff,0x00000000,
++0x830,0xffffffff,0x04040404,
++0x834,0xffffffff,0x00020204,
++0x838,0xffffff00,0x00000000,
++0x86c,0x000000ff,0x00000000,
++0x83c,0xffffffff,0x00000000,
++0x848,0xffffffff,0x00000000,
++0x84c,0xffffffff,0x00000000,
++0x868,0xffffffff,0x00000000,
++0xe00,0xffffffff,0x00000000,
++0xe04,0xffffffff,0x00000000,
++0xe08,0x0000ff00,0x00000000,
++0x86c,0xffffff00,0x00000000,
++0xe10,0xffffffff,0x00000000,
++0xe14,0xffffffff,0x00000000,
++0xe18,0xffffffff,0x00000000,
++0xe1c,0xffffffff,0x00000000,
++0x830,0xffffffff,0x00000000,
++0x834,0xffffffff,0x00000000,
++0x838,0xffffff00,0x00000000,
++0x86c,0x000000ff,0x00000000,
++0x83c,0xffffffff,0x00000000,
++0x848,0xffffffff,0x00000000,
++0x84c,0xffffffff,0x00000000,
++0x868,0xffffffff,0x00000000,
++};
++
++u32  Rtl8192CUPHY_REG_Array_PG_mCard[PHY_REG_Array_PG_mCardLength] = {
++0xe00,0xffffffff,0x0a0c0c0c,
++0xe04,0xffffffff,0x02040608,
++0xe08,0x0000ff00,0x00000000,
++0x86c,0xffffff00,0x00000000,
++0xe10,0xffffffff,0x0a0c0d0e,
++0xe14,0xffffffff,0x02040608,
++0xe18,0xffffffff,0x0a0c0d0e,
++0xe1c,0xffffffff,0x02040608,
++0x830,0xffffffff,0x0a0c0c0c,
++0x834,0xffffffff,0x02040608,
++0x838,0xffffff00,0x00000000,
++0x86c,0x000000ff,0x00000000,
++0x83c,0xffffffff,0x0a0c0d0e,
++0x848,0xffffffff,0x02040608,
++0x84c,0xffffffff,0x0a0c0d0e,
++0x868,0xffffffff,0x02040608,
++0xe00,0xffffffff,0x00000000,
++0xe04,0xffffffff,0x00000000,
++0xe08,0x0000ff00,0x00000000,
++0x86c,0xffffff00,0x00000000,
++0xe10,0xffffffff,0x00000000,
++0xe14,0xffffffff,0x00000000,
++0xe18,0xffffffff,0x00000000,
++0xe1c,0xffffffff,0x00000000,
++0x830,0xffffffff,0x00000000,
++0x834,0xffffffff,0x00000000,
++0x838,0xffffff00,0x00000000,
++0x86c,0x000000ff,0x00000000,
++0x83c,0xffffffff,0x00000000,
++0x848,0xffffffff,0x00000000,
++0x84c,0xffffffff,0x00000000,
++0x868,0xffffffff,0x00000000,
++0xe00,0xffffffff,0x04040404,
++0xe04,0xffffffff,0x00020204,
++0xe08,0x0000ff00,0x00000000,
++0x86c,0xffffff00,0x00000000,
++0xe10,0xffffffff,0x06060606,
++0xe14,0xffffffff,0x00020406,
++0xe18,0xffffffff,0x00000000,
++0xe1c,0xffffffff,0x00000000,
++0x830,0xffffffff,0x04040404,
++0x834,0xffffffff,0x00020204,
++0x838,0xffffff00,0x00000000,
++0x86c,0x000000ff,0x00000000,
++0x83c,0xffffffff,0x06060606,
++0x848,0xffffffff,0x00020406,
++0x84c,0xffffffff,0x00000000,
++0x868,0xffffffff,0x00000000,
++0xe00,0xffffffff,0x00000000,
++0xe04,0xffffffff,0x00000000,
++0xe08,0x0000ff00,0x00000000,
++0x86c,0xffffff00,0x00000000,
++0xe10,0xffffffff,0x00000000,
++0xe14,0xffffffff,0x00000000,
++0xe18,0xffffffff,0x00000000,
++0xe1c,0xffffffff,0x00000000,
++0x830,0xffffffff,0x00000000,
++0x834,0xffffffff,0x00000000,
++0x838,0xffffff00,0x00000000,
++0x86c,0x000000ff,0x00000000,
++0x83c,0xffffffff,0x00000000,
++0x848,0xffffffff,0x00000000,
++0x84c,0xffffffff,0x00000000,
++0x868,0xffffffff,0x00000000,
++0xe00,0xffffffff,0x00000000,
++0xe04,0xffffffff,0x00000000,
++0xe08,0x0000ff00,0x00000000,
++0x86c,0xffffff00,0x00000000,
++0xe10,0xffffffff,0x00000000,
++0xe14,0xffffffff,0x00000000,
++0xe18,0xffffffff,0x00000000,
++0xe1c,0xffffffff,0x00000000,
++0x830,0xffffffff,0x00000000,
++0x834,0xffffffff,0x00000000,
++0x838,0xffffff00,0x00000000,
++0x86c,0x000000ff,0x00000000,
++0x83c,0xffffffff,0x00000000,
++0x848,0xffffffff,0x00000000,
++0x84c,0xffffffff,0x00000000,
++0x868,0xffffffff,0x00000000,
++0xe00,0xffffffff,0x04040404,
++0xe04,0xffffffff,0x00020204,
++0xe08,0x0000ff00,0x00000000,
++0x86c,0xffffff00,0x00000000,
++0xe10,0xffffffff,0x00000000,
++0xe14,0xffffffff,0x00000000,
++0xe18,0xffffffff,0x00000000,
++0xe1c,0xffffffff,0x00000000,
++0x830,0xffffffff,0x04040404,
++0x834,0xffffffff,0x00020204,
++0x838,0xffffff00,0x00000000,
++0x86c,0x000000ff,0x00000000,
++0x83c,0xffffffff,0x00000000,
++0x848,0xffffffff,0x00000000,
++0x84c,0xffffffff,0x00000000,
++0x868,0xffffffff,0x00000000,
++0xe00,0xffffffff,0x00000000,
++0xe04,0xffffffff,0x00000000,
++0xe08,0x0000ff00,0x00000000,
++0x86c,0xffffff00,0x00000000,
++0xe10,0xffffffff,0x00000000,
++0xe14,0xffffffff,0x00000000,
++0xe18,0xffffffff,0x00000000,
++0xe1c,0xffffffff,0x00000000,
++0x830,0xffffffff,0x00000000,
++0x834,0xffffffff,0x00000000,
++0x838,0xffffff00,0x00000000,
++0x86c,0x000000ff,0x00000000,
++0x83c,0xffffffff,0x00000000,
++0x848,0xffffffff,0x00000000,
++0x84c,0xffffffff,0x00000000,
++0x868,0xffffffff,0x00000000,
++};
++
++u32 Rtl8192CUPHY_REG_Array_MP[PHY_REG_Array_MPLength] = {
++0xc30,0x69e9ac4a,
++0xc3c,0x0a979718,
++};
++
++u32 Rtl8192CUPHY_REG_1T_HPArray[PHY_REG_1T_HPArrayLength] = {
++0x024,0x0011800f,
++0x028,0x00ffdb83,
++0x040,0x000c0004,
++0x800,0x80040000,
++0x804,0x00000001,
++0x808,0x0000fc00,
++0x80c,0x0000000a,
++0x810,0x10000330, //for Broadcom AP IOT
++0x814,0x020c3d10,
++0x818,0x02200385,
++0x81c,0x00000000,
++0x820,0x01000100,
++0x824,0x00390204,
++0x828,0x00000000,
++0x82c,0x00000000,
++0x830,0x00000000,
++0x834,0x00000000,
++0x838,0x00000000,
++0x83c,0x00000000,
++0x840,0x00010000,
++0x844,0x00000000,
++0x848,0x00000000,
++0x84c,0x00000000,
++0x850,0x00000000,
++0x854,0x00000000,
++0x858,0x569a569a,
++0x85c,0x001b25a4,
++0x860,0x66e60230,
++0x864,0x061f0130,
++0x868,0x00000000,
++0x86c,0x20202000,
++0x870,0x03000300,
++0x874,0x22004000,
++0x878,0x00000808,
++0x87c,0x00ffc3f1,
++0x880,0xc0083070,
++0x884,0x000004d5,
++0x888,0x00000000,
++0x88c,0xccc000c0,
++0x890,0x00000800,
++0x894,0xfffffffe,
++0x898,0x40302010,
++0x89c,0x00706050,
++0x900,0x00000000,
++0x904,0x00000023,
++0x908,0x00000000,
++0x90c,0x81121111,
++0xa00,0x00d047c8,
++0xa04,0x80ff000c,
++0xa08,0x8c838300,
++0xa0c,0x2e68120f,
++0xa10,0x9500bb78,
++0xa14,0x11144028,
++0xa18,0x00881117,
++0xa1c,0x89140f00,
++0xa20,0x15160000,
++0xa24,0x070b0f12,
++0xa28,0x00000104,
++0xa2c,0x00d30000,
++0xa70,0x101fbf00,
++0xa74,0x00000007,
++0xc00,0x48071d40,
++0xc04,0x03a05611,
++0xc08,0x000000e4,
++0xc0c,0x6c6c6c6c,
++0xc10,0x08800000,
++0xc14,0x40000100,
++0xc18,0x08800000,
++0xc1c,0x40000100,
++0xc20,0x00000000,
++0xc24,0x00000000,
++0xc28,0x00000000,
++0xc2c,0x00000000,
++0xc30,0x69e9ac44,
++0xc34,0x469652cf,
++0xc38,0x49795994,
++0xc3c,0x0a97971c,
++0xc40,0x1f7c403f,
++0xc44,0x000100b7,
++0xc48,0xec020107,
++0xc4c,0x007f037f,
++0xc50,0x6954342e,
++0xc54,0x43bc0094,
++0xc58,0x6954342f,
++0xc5c,0x433c0094,
++0xc60,0x00000000,
++0xc64,0x5116848b,
++0xc68,0x47c00bff,
++0xc6c,0x00000036,
++0xc70,0x2c46000d,
++0xc74,0x018610db,
++0xc78,0x0000001f,
++0xc7c,0x00b91612,
++0xc80,0x24000090,
++0xc84,0x20f60000,
++0xc88,0x24000090,
++0xc8c,0x20200000,
++0xc90,0x00121820,
++0xc94,0x00000000,
++0xc98,0x00121820,
++0xc9c,0x00007f7f,
++0xca0,0x00000000,
++0xca4,0x00000080,
++0xca8,0x00000000,
++0xcac,0x00000000,
++0xcb0,0x00000000,
++0xcb4,0x00000000,
++0xcb8,0x00000000,
++0xcbc,0x28000000,
++0xcc0,0x00000000,
++0xcc4,0x00000000,
++0xcc8,0x00000000,
++0xccc,0x00000000,
++0xcd0,0x00000000,
++0xcd4,0x00000000,
++0xcd8,0x64b22427,
++0xcdc,0x00766932,
++0xce0,0x00222222,
++0xce4,0x00000000,
++0xce8,0x37644302,
++0xcec,0x2f97d40c,
++0xd00,0x00000740,
++0xd04,0x00020401,
++0xd08,0x0000907f,
++0xd0c,0x20010201,
++0xd10,0xa0633333,
++0xd14,0x3333bc43,
++0xd18,0x7a8f5b6b,
++0xd2c,0xcc979975,
++0xd30,0x00000000,
++0xd34,0x80608000,
++0xd38,0x00000000,
++0xd3c,0x00027293,
++0xd40,0x00000000,
++0xd44,0x00000000,
++0xd48,0x00000000,
++0xd4c,0x00000000,
++0xd50,0x6437140a,
++0xd54,0x00000000,
++0xd58,0x00000000,
++0xd5c,0x30032064,
++0xd60,0x4653de68,
++0xd64,0x04518a3c,
++0xd68,0x00002101,
++0xd6c,0x2a201c16,
++0xd70,0x1812362e,
++0xd74,0x322c2220,
++0xd78,0x000e3c24,
++0xe00,0x24242424,
++0xe04,0x24242424,
++0xe08,0x03902024,
++0xe10,0x24242424,
++0xe14,0x24242424,
++0xe18,0x24242424,
++0xe1c,0x24242424,
++0xe28,0x00000000,
++0xe30,0x1000dc1f,
++0xe34,0x10008c1f,
++0xe38,0x02140102,
++0xe3c,0x681604c2,
++0xe40,0x01007c00,
++0xe44,0x01004800,
++0xe48,0xfb000000,
++0xe4c,0x000028d1,
++0xe50,0x1000dc1f,
++0xe54,0x10008c1f,
++0xe58,0x02140102,
++0xe5c,0x28160d05,
++0xe60,0x00000008,
++0xe68,0x001b25a4,
++0xe6c,0x631b25a0,
++0xe70,0x631b25a0,
++0xe74,0x081b25a0,
++0xe78,0x081b25a0,
++0xe7c,0x081b25a0,
++0xe80,0x081b25a0,
++0xe84,0x631b25a0,
++0xe88,0x081b25a0,
++0xe8c,0x631b25a0,
++0xed0,0x631b25a0,
++0xed4,0x631b25a0,
++0xed8,0x631b25a0,
++0xedc,0x001b25a0,
++0xee0,0x001b25a0,
++0xeec,0x6b1b25a0,
++0xee8,0x31555448,
++0xf14,0x00000003,
++0xf4c,0x00000000,
++0xf00,0x00000300,
++};
++
++u32 Rtl8192CUPHY_REG_1T_mCardArray[PHY_REG_1T_mCardArrayLength] = {
++0x024,0x0011800d,
++0x028,0x00ffdb83,
++0x800,0x80040000,
++0x804,0x00000001,
++0x808,0x0000fc00,
++0x80c,0x0000000a,
++0x810,0x10000330, //for Broadcom AP IOT
++0x814,0x020c3d10,
++0x818,0x02200385,
++0x81c,0x00000000,
++0x820,0x01000100,
++0x824,0x00390004,
++0x828,0x00000000,
++0x82c,0x00000000,
++0x830,0x00000000,
++0x834,0x00000000,
++0x838,0x00000000,
++0x83c,0x00000000,
++0x840,0x00010000,
++0x844,0x00000000,
++0x848,0x00000000,
++0x84c,0x00000000,
++0x850,0x00000000,
++0x854,0x00000000,
++0x858,0x569a569a,
++0x85c,0x001b25a4,
++0x860,0x66e60230,
++0x864,0x061f0130,
++0x868,0x00000000,
++0x86c,0x32323200,
++0x870,0x07000700,
++0x874,0x22004000,
++0x878,0x00000808,
++0x87c,0x00000000,
++0x880,0xc0083070,
++0x884,0x000004d5,
++0x888,0x00000000,
++0x88c,0xccc000c0,
++0x890,0x00000800,
++0x894,0xfffffffe,
++0x898,0x40302010,
++0x89c,0x00706050,
++0x900,0x00000000,
++0x904,0x00000023,
++0x908,0x00000000,
++0x90c,0x81121111,
++0xa00,0x00d047c8,
++0xa04,0x80ff000c,
++0xa08,0x8c838300,
++0xa0c,0x2e68120f,
++0xa10,0x9500bb78,
++0xa14,0x11144028,
++0xa18,0x00881117,
++0xa1c,0x89140f00,
++0xa20,0x1a1b0000,
++0xa24,0x090e1317,
++0xa28,0x00000204,
++0xa2c,0x00d30000,
++0xa70,0x101fbf00,
++0xa74,0x00000007,
++0xc00,0x48071d40,
++0xc04,0x03a05611,
++0xc08,0x000000e4,
++0xc0c,0x6c6c6c6c,
++0xc10,0x08800000,
++0xc14,0x40000100,
++0xc18,0x08800000,
++0xc1c,0x40000100,
++0xc20,0x00000000,
++0xc24,0x00000000,
++0xc28,0x00000000,
++0xc2c,0x00000000,
++0xc30,0x69e9ac44,
++0xc34,0x469652cf,
++0xc38,0x49795994,
++0xc3c,0x0a97971c,
++0xc40,0x1f7c403f,
++0xc44,0x000100b7,
++0xc48,0xec020107,
++0xc4c,0x007f037f,
++0xc50,0x69543420,
++0xc54,0x43bc0094,
++0xc58,0x69543420,
++0xc5c,0x433c0094,
++0xc60,0x00000000,
++0xc64,0x5116848b,
++0xc68,0x47c00bff,
++0xc6c,0x00000036,
++0xc70,0x2c7f000d,
++0xc74,0x018610db,
++0xc78,0x0000001f,
++0xc7c,0x00b91612,
++0xc80,0x40000100,
++0xc84,0x20f60000,
++0xc88,0x40000100,
++0xc8c,0x20200000,
++0xc90,0x00121820,
++0xc94,0x00000000,
++0xc98,0x00121820,
++0xc9c,0x00007f7f,
++0xca0,0x00000000,
++0xca4,0x00000080,
++0xca8,0x00000000,
++0xcac,0x00000000,
++0xcb0,0x00000000,
++0xcb4,0x00000000,
++0xcb8,0x00000000,
++0xcbc,0x28000000,
++0xcc0,0x00000000,
++0xcc4,0x00000000,
++0xcc8,0x00000000,
++0xccc,0x00000000,
++0xcd0,0x00000000,
++0xcd4,0x00000000,
++0xcd8,0x64b22427,
++0xcdc,0x00766932,
++0xce0,0x00222222,
++0xce4,0x00000000,
++0xce8,0x37644302,
++0xcec,0x2f97d40c,
++0xd00,0x00000740,
++0xd04,0x00020401,
++0xd08,0x0000907f,
++0xd0c,0x20010201,
++0xd10,0xa0633333,
++0xd14,0x3333bc43,
++0xd18,0x7a8f5b6b,
++0xd2c,0xcc979975,
++0xd30,0x00000000,
++0xd34,0x80608000,
++0xd38,0x00000000,
++0xd3c,0x00027293,
++0xd40,0x00000000,
++0xd44,0x00000000,
++0xd48,0x00000000,
++0xd4c,0x00000000,
++0xd50,0x6437140a,
++0xd54,0x00000000,
++0xd58,0x00000000,
++0xd5c,0x30032064,
++0xd60,0x4653de68,
++0xd64,0x04518a3c,
++0xd68,0x00002101,
++0xd6c,0x2a201c16,
++0xd70,0x1812362e,
++0xd74,0x322c2220,
++0xd78,0x000e3c24,
++0xe00,0x2a2a2a2a,
++0xe04,0x2a2a2a2a,
++0xe08,0x03902a2a,
++0xe10,0x2a2a2a2a,
++0xe14,0x2a2a2a2a,
++0xe18,0x2a2a2a2a,
++0xe1c,0x2a2a2a2a,
++0xe28,0x00000000,
++0xe30,0x1000dc1f,
++0xe34,0x10008c1f,
++0xe38,0x02140102,
++0xe3c,0x681604c2,
++0xe40,0x01007c00,
++0xe44,0x01004800,
++0xe48,0xfb000000,
++0xe4c,0x000028d1,
++0xe50,0x1000dc1f,
++0xe54,0x10008c1f,
++0xe58,0x02140102,
++0xe5c,0x28160d05,
++0xe60,0x00000008,
++0xe68,0x001b25a4,
++0xe6c,0x631b25a0,
++0xe70,0x631b25a0,
++0xe74,0x081b25a0,
++0xe78,0x081b25a0,
++0xe7c,0x081b25a0,
++0xe80,0x081b25a0,
++0xe84,0x631b25a0,
++0xe88,0x081b25a0,
++0xe8c,0x631b25a0,
++0xed0,0x631b25a0,
++0xed4,0x631b25a0,
++0xed8,0x631b25a0,
++0xedc,0x001b25a0,
++0xee0,0x001b25a0,
++0xeec,0x6b1b25a0,
++0xf14,0x00000003,
++0xf4c,0x00000000,
++0xf00,0x00000300,
++};
++
++u32 Rtl8192CUPHY_REG_2T_mCardArray[PHY_REG_2T_mCardArrayLength] = {
++0x024,0x0011800d,
++0x028,0x00ffdb83,
++0x800,0x80040002,
++0x804,0x00000003,
++0x808,0x0000fc00,
++0x80c,0x0000000a,
++0x810,0x10000330, //for Broadcom AP IOT
++0x814,0x020c3d10,
++0x818,0x02200385,
++0x81c,0x00000000,
++0x820,0x01000100,
++0x824,0x00390004,
++0x828,0x01000100,
++0x82c,0x00390004,
++0x830,0x27272727,
++0x834,0x27272727,
++0x838,0x27272727,
++0x83c,0x27272727,
++0x840,0x00010000,
++0x844,0x00010000,
++0x848,0x27272727,
++0x84c,0x27272727,
++0x850,0x00000000,
++0x854,0x00000000,
++0x858,0x569a569a,
++0x85c,0x0c1b25a4,
++0x860,0x66e60230,
++0x864,0x061f0130,
++0x868,0x27272727,
++0x86c,0x2b2b2b27,
++0x870,0x07000700,
++0x874,0x22184000,
++0x878,0x08080808,
++0x87c,0x00000000,
++0x880,0xc0083070,
++0x884,0x000004d5,
++0x888,0x00000000,
++0x88c,0xcc0000c0,
++0x890,0x00000800,
++0x894,0xfffffffe,
++0x898,0x40302010,
++0x89c,0x00706050,
++0x900,0x00000000,
++0x904,0x00000023,
++0x908,0x00000000,
++0x90c,0x81121313,
++0xa00,0x00d047c8,
++0xa04,0x80ff000c,
++0xa08,0x8c838300,
++0xa0c,0x2e68120f,
++0xa10,0x9500bb78,
++0xa14,0x11144028,
++0xa18,0x00881117,
++0xa1c,0x89140f00,
++0xa20,0x1a1b0000,
++0xa24,0x090e1317,
++0xa28,0x00000204,
++0xa2c,0x00d30000,
++0xa70,0x101fbf00,
++0xa74,0x00000007,
++0xc00,0x48071d40,
++0xc04,0x03a05633,
++0xc08,0x000000e4,
++0xc0c,0x6c6c6c6c,
++0xc10,0x08800000,
++0xc14,0x40000100,
++0xc18,0x08800000,
++0xc1c,0x40000100,
++0xc20,0x00000000,
++0xc24,0x00000000,
++0xc28,0x00000000,
++0xc2c,0x00000000,
++0xc30,0x69e9ac44,
++0xc34,0x469652cf,
++0xc38,0x49795994,
++0xc3c,0x0a97971c,
++0xc40,0x1f7c403f,
++0xc44,0x000100b7,
++0xc48,0xec020107,
++0xc4c,0x007f037f,
++0xc50,0x69543420,
++0xc54,0x43bc0094,
++0xc58,0x69543420,
++0xc5c,0x433c0094,
++0xc60,0x00000000,
++0xc64,0x5116848b,
++0xc68,0x47c00bff,
++0xc6c,0x00000036,
++0xc70,0x2c7f000d,
++0xc74,0x218610db,
++0xc78,0x0000001f,
++0xc7c,0x00b91612,
++0xc80,0x40000100,
++0xc84,0x20f60000,
++0xc88,0x40000100,
++0xc8c,0xa0e40000,
++0xc90,0x00121820,
++0xc94,0x00000000,
++0xc98,0x00121820,
++0xc9c,0x00007f7f,
++0xca0,0x00000000,
++0xca4,0x00000080,
++0xca8,0x00000000,
++0xcac,0x00000000,
++0xcb0,0x00000000,
++0xcb4,0x00000000,
++0xcb8,0x00000000,
++0xcbc,0x28000000,
++0xcc0,0x00000000,
++0xcc4,0x00000000,
++0xcc8,0x00000000,
++0xccc,0x00000000,
++0xcd0,0x00000000,
++0xcd4,0x00000000,
++0xcd8,0x64b22427,
++0xcdc,0x00766932,
++0xce0,0x00222222,
++0xce4,0x00000000,
++0xce8,0x37644302,
++0xcec,0x2f97d40c,
++0xd00,0x00080740,
++0xd04,0x00020403,
++0xd08,0x0000907f,
++0xd0c,0x20010201,
++0xd10,0xa0633333,
++0xd14,0x3333bc43,
++0xd18,0x7a8f5b6b,
++0xd2c,0xcc979975,
++0xd30,0x00000000,
++0xd34,0x80608000,
++0xd38,0x00000000,
++0xd3c,0x00027293,
++0xd40,0x00000000,
++0xd44,0x00000000,
++0xd48,0x00000000,
++0xd4c,0x00000000,
++0xd50,0x6437140a,
++0xd54,0x00000000,
++0xd58,0x00000000,
++0xd5c,0x30032064,
++0xd60,0x4653de68,
++0xd64,0x04518a3c,
++0xd68,0x00002101,
++0xd6c,0x2a201c16,
++0xd70,0x1812362e,
++0xd74,0x322c2220,
++0xd78,0x000e3c24,
++0xe00,0x2a2a2a2a,
++0xe04,0x2a2a2a2a,
++0xe08,0x03902a2a,
++0xe10,0x2a2a2a2a,
++0xe14,0x2a2a2a2a,
++0xe18,0x2a2a2a2a,
++0xe1c,0x2a2a2a2a,
++0xe28,0x00000000,
++0xe30,0x1000dc1f,
++0xe34,0x10008c1f,
++0xe38,0x02140102,
++0xe3c,0x681604c2,
++0xe40,0x01007c00,
++0xe44,0x01004800,
++0xe48,0xfb000000,
++0xe4c,0x000028d1,
++0xe50,0x1000dc1f,
++0xe54,0x10008c1f,
++0xe58,0x02140102,
++0xe5c,0x28160d05,
++0xe60,0x00000010,
++0xe68,0x001b25a4,
++0xe6c,0x63db25a4,
++0xe70,0x63db25a4,
++0xe74,0x0c1b25a4,
++0xe78,0x0c1b25a4,
++0xe7c,0x0c1b25a4,
++0xe80,0x0c1b25a4,
++0xe84,0x63db25a4,
++0xe88,0x0c1b25a4,
++0xe8c,0x63db25a4,
++0xed0,0x63db25a4,
++0xed4,0x63db25a4,
++0xed8,0x63db25a4,
++0xedc,0x001b25a4,
++0xee0,0x001b25a4,
++0xeec,0x6fdb25a4,
++0xf14,0x00000003,
++0xf4c,0x00000000,
++0xf00,0x00000300,
++};
++
++u32 Rtl8192CUPHY_REG_Array_PG_HP[PHY_REG_Array_PG_HPLength] = {
++0xe00,0xffffffff,0x06080808,
++0xe04,0xffffffff,0x00040406,
++0xe08,0x0000ff00,0x00000000,
++0x86c,0xffffff00,0x00000000,
++0xe10,0xffffffff,0x04060608,
++0xe14,0xffffffff,0x00020204,
++0xe18,0xffffffff,0x04060608,
++0xe1c,0xffffffff,0x00020204,
++0x830,0xffffffff,0x06080808,
++0x834,0xffffffff,0x00040406,
++0x838,0xffffff00,0x00000000,
++0x86c,0x000000ff,0x00000000,
++0x83c,0xffffffff,0x04060608,
++0x848,0xffffffff,0x00020204,
++0x84c,0xffffffff,0x04060608,
++0x868,0xffffffff,0x00020204,
++0xe00,0xffffffff,0x00000000,
++0xe04,0xffffffff,0x00000000,
++0xe08,0x0000ff00,0x00000000,
++0x86c,0xffffff00,0x00000000,
++0xe10,0xffffffff,0x00000000,
++0xe14,0xffffffff,0x00000000,
++0xe18,0xffffffff,0x00000000,
++0xe1c,0xffffffff,0x00000000,
++0x830,0xffffffff,0x00000000,
++0x834,0xffffffff,0x00000000,
++0x838,0xffffff00,0x00000000,
++0x86c,0x000000ff,0x00000000,
++0x83c,0xffffffff,0x00000000,
++0x848,0xffffffff,0x00000000,
++0x84c,0xffffffff,0x00000000,
++0x868,0xffffffff,0x00000000,
++0xe00,0xffffffff,0x00000000,
++0xe04,0xffffffff,0x00000000,
++0xe08,0x0000ff00,0x00000000,
++0x86c,0xffffff00,0x00000000,
++0xe10,0xffffffff,0x00000000,
++0xe14,0xffffffff,0x00000000,
++0xe18,0xffffffff,0x00000000,
++0xe1c,0xffffffff,0x00000000,
++0x830,0xffffffff,0x00000000,
++0x834,0xffffffff,0x00000000,
++0x838,0xffffff00,0x00000000,
++0x86c,0x000000ff,0x00000000,
++0x83c,0xffffffff,0x00000000,
++0x848,0xffffffff,0x00000000,
++0x84c,0xffffffff,0x00000000,
++0x868,0xffffffff,0x00000000,
++0xe00,0xffffffff,0x00000000,
++0xe04,0xffffffff,0x00000000,
++0xe08,0x0000ff00,0x00000000,
++0x86c,0xffffff00,0x00000000,
++0xe10,0xffffffff,0x00000000,
++0xe14,0xffffffff,0x00000000,
++0xe18,0xffffffff,0x00000000,
++0xe1c,0xffffffff,0x00000000,
++0x830,0xffffffff,0x00000000,
++0x834,0xffffffff,0x00000000,
++0x838,0xffffff00,0x00000000,
++0x86c,0x000000ff,0x00000000,
++0x83c,0xffffffff,0x00000000,
++0x848,0xffffffff,0x00000000,
++0x84c,0xffffffff,0x00000000,
++0x868,0xffffffff,0x00000000,
++0xe00,0xffffffff,0x00000000,
++0xe04,0xffffffff,0x00000000,
++0xe08,0x0000ff00,0x00000000,
++0x86c,0xffffff00,0x00000000,
++0xe10,0xffffffff,0x00000000,
++0xe14,0xffffffff,0x00000000,
++0xe18,0xffffffff,0x00000000,
++0xe1c,0xffffffff,0x00000000,
++0x830,0xffffffff,0x00000000,
++0x834,0xffffffff,0x00000000,
++0x838,0xffffff00,0x00000000,
++0x86c,0x000000ff,0x00000000,
++0x83c,0xffffffff,0x00000000,
++0x848,0xffffffff,0x00000000,
++0x84c,0xffffffff,0x00000000,
++0x868,0xffffffff,0x00000000,
++0xe00,0xffffffff,0x00000000,
++0xe04,0xffffffff,0x00000000,
++0xe08,0x0000ff00,0x00000000,
++0x86c,0xffffff00,0x00000000,
++0xe10,0xffffffff,0x00000000,
++0xe14,0xffffffff,0x00000000,
++0xe18,0xffffffff,0x00000000,
++0xe1c,0xffffffff,0x00000000,
++0x830,0xffffffff,0x00000000,
++0x834,0xffffffff,0x00000000,
++0x838,0xffffff00,0x00000000,
++0x86c,0x000000ff,0x00000000,
++0x83c,0xffffffff,0x00000000,
++0x848,0xffffffff,0x00000000,
++0x84c,0xffffffff,0x00000000,
++0x868,0xffffffff,0x00000000,
++0xe00,0xffffffff,0x00000000,
++0xe04,0xffffffff,0x00000000,
++0xe08,0x0000ff00,0x00000000,
++0x86c,0xffffff00,0x00000000,
++0xe10,0xffffffff,0x00000000,
++0xe14,0xffffffff,0x00000000,
++0xe18,0xffffffff,0x00000000,
++0xe1c,0xffffffff,0x00000000,
++0x830,0xffffffff,0x00000000,
++0x834,0xffffffff,0x00000000,
++0x838,0xffffff00,0x00000000,
++0x86c,0x000000ff,0x00000000,
++0x83c,0xffffffff,0x00000000,
++0x848,0xffffffff,0x00000000,
++0x84c,0xffffffff,0x00000000,
++0x868,0xffffffff,0x00000000,
++};
++
++u32 Rtl8192CURadioA_2TArray[RadioA_2TArrayLength] = {
++0x000,0x00030159,
++0x001,0x00031284,
++0x002,0x00098000,
++0x003,0x00018c63,
++0x004,0x000210e7,
++0x009,0x0002044f,
++0x00a,0x0001adb1,
++0x00b,0x00054867,
++0x00c,0x0008992e,
++0x00d,0x0000e52c,
++0x00e,0x00039ce7,
++0x00f,0x00000451,
++0x019,0x00000000,
++0x01a,0x00010255,
++0x01b,0x00060a00,
++0x01c,0x000fc378,
++0x01d,0x000a1250,
++0x01e,0x0004445f,
++0x01f,0x00080001,
++0x020,0x0000b614,
++0x021,0x0006c000,
++0x022,0x00000000,
++0x023,0x00001558,
++0x024,0x00000060,
++0x025,0x00000483,
++0x026,0x0004f000,
++0x027,0x000ec7d9,
++0x028,0x000577c0,
++0x029,0x00004783,
++0x02a,0x00000001,
++0x02b,0x00021334,
++0x02a,0x00000000,
++0x02b,0x00000054,
++0x02a,0x00000001,
++0x02b,0x00000808,
++0x02b,0x00053333,
++0x02c,0x0000000c,
++0x02a,0x00000002,
++0x02b,0x00000808,
++0x02b,0x0005b333,
++0x02c,0x0000000d,
++0x02a,0x00000003,
++0x02b,0x00000808,
++0x02b,0x00063333,
++0x02c,0x0000000d,
++0x02a,0x00000004,
++0x02b,0x00000808,
++0x02b,0x0006b333,
++0x02c,0x0000000d,
++0x02a,0x00000005,
++0x02b,0x00000808,
++0x02b,0x00073333,
++0x02c,0x0000000d,
++0x02a,0x00000006,
++0x02b,0x00000709,
++0x02b,0x0005b333,
++0x02c,0x0000000d,
++0x02a,0x00000007,
++0x02b,0x00000709,
++0x02b,0x00063333,
++0x02c,0x0000000d,
++0x02a,0x00000008,
++0x02b,0x0000060a,
++0x02b,0x0004b333,
++0x02c,0x0000000d,
++0x02a,0x00000009,
++0x02b,0x0000060a,
++0x02b,0x00053333,
++0x02c,0x0000000d,
++0x02a,0x0000000a,
++0x02b,0x0000060a,
++0x02b,0x0005b333,
++0x02c,0x0000000d,
++0x02a,0x0000000b,
++0x02b,0x0000060a,
++0x02b,0x00063333,
++0x02c,0x0000000d,
++0x02a,0x0000000c,
++0x02b,0x0000060a,
++0x02b,0x0006b333,
++0x02c,0x0000000d,
++0x02a,0x0000000d,
++0x02b,0x0000060a,
++0x02b,0x00073333,
++0x02c,0x0000000d,
++0x02a,0x0000000e,
++0x02b,0x0000050b,
++0x02b,0x00066666,
++0x02c,0x0000001a,
++0x02a,0x000e0000,
++0x010,0x0004000f,
++0x011,0x000e31fc,
++0x010,0x0006000f,
++0x011,0x000ff9f8,
++0x010,0x0002000f,
++0x011,0x000203f9,
++0x010,0x0003000f,
++0x011,0x000ff500,
++0x010,0x00000000,
++0x011,0x00000000,
++0x010,0x0008000f,
++0x011,0x0003f100,
++0x010,0x0009000f,
++0x011,0x00023100,
++0x012,0x00032000,
++0x012,0x00071000,
++0x012,0x000b0000,
++0x012,0x000fc000,
++0x013,0x000287b3,
++0x013,0x000244b7,
++0x013,0x000204ab,
++0x013,0x0001c49f,
++0x013,0x00018493,
++0x013,0x0001429b,
++0x013,0x00010299,
++0x013,0x0000c29c,
++0x013,0x000081a0,
++0x013,0x000040ac,
++0x013,0x00000020,
++0x014,0x0001944c,
++0x014,0x00059444,
++0x014,0x0009944c,
++0x014,0x000d9444,
++0x015,0x0000f424,
++0x015,0x0004f424,
++0x015,0x0008f424,
++0x015,0x000cf424,
++0x016,0x000e0330,
++0x016,0x000a0330,
++0x016,0x00060330,
++0x016,0x00020330,
++0x000,0x00010159,
++0x018,0x0000f401,
++0x0fe,0x00000000,
++0x0fe,0x00000000,
++0x01f,0x00080003,
++0x0fe,0x00000000,
++0x0fe,0x00000000,
++0x01e,0x00044457,
++0x01f,0x00080000,
++0x000,0x00030159,
++};
++
++u32 Rtl8192CURadioB_2TArray[RadioB_2TArrayLength] = {
++0x000,0x00030159,
++0x001,0x00031284,
++0x002,0x00098000,
++0x003,0x00018c63,
++0x004,0x000210e7,
++0x009,0x0002044f,
++0x00a,0x0001adb1,
++0x00b,0x00054867,
++0x00c,0x0008992e,
++0x00d,0x0000e52c,
++0x00e,0x00039ce7,
++0x00f,0x00000451,
++0x012,0x00032000,
++0x012,0x00071000,
++0x012,0x000b0000,
++0x012,0x000fc000,
++0x013,0x000287af,
++0x013,0x000244b7,
++0x013,0x000204ab,
++0x013,0x0001c49f,
++0x013,0x00018493,
++0x013,0x00014297,
++0x013,0x00010295,
++0x013,0x0000c298,
++0x013,0x0000819c,
++0x013,0x000040a8,
++0x013,0x0000001c,
++0x014,0x0001944c,
++0x014,0x00059444,
++0x014,0x0009944c,
++0x014,0x000d9444,
++0x015,0x0000f424,
++0x015,0x0004f424,
++0x015,0x0008f424,
++0x015,0x000cf424,
++0x016,0x000e0330,
++0x016,0x000a0330,
++0x016,0x00060330,
++0x016,0x00020330,
++};
++
++u32 Rtl8192CURadioA_1TArray[RadioA_1TArrayLength] = {
++0x000,0x00030159,
++0x001,0x00031284,
++0x002,0x00098000,
++0x003,0x00018c63,
++0x004,0x000210e7,
++0x009,0x0002044f,
++0x00a,0x0001adb1,
++0x00b,0x00054867,
++0x00c,0x0008992e,
++0x00d,0x0000e52c,
++0x00e,0x00039ce7,
++0x00f,0x00000451,
++0x019,0x00000000,
++0x01a,0x00010255,
++0x01b,0x00060a00,
++0x01c,0x000fc378,
++0x01d,0x000a1250,
++0x01e,0x0004445f,
++0x01f,0x00080001,
++0x020,0x0000b614,
++0x021,0x0006c000,
++0x022,0x00000000,
++0x023,0x00001558,
++0x024,0x00000060,
++0x025,0x00000483,
++0x026,0x0004f000,
++0x027,0x000ec7d9,
++0x028,0x000577c0,
++0x029,0x00004783,
++0x02a,0x00000001,
++0x02b,0x00021334,
++0x02a,0x00000000,
++0x02b,0x00000054,
++0x02a,0x00000001,
++0x02b,0x00000808,
++0x02b,0x00053333,
++0x02c,0x0000000c,
++0x02a,0x00000002,
++0x02b,0x00000808,
++0x02b,0x0005b333,
++0x02c,0x0000000d,
++0x02a,0x00000003,
++0x02b,0x00000808,
++0x02b,0x00063333,
++0x02c,0x0000000d,
++0x02a,0x00000004,
++0x02b,0x00000808,
++0x02b,0x0006b333,
++0x02c,0x0000000d,
++0x02a,0x00000005,
++0x02b,0x00000808,
++0x02b,0x00073333,
++0x02c,0x0000000d,
++0x02a,0x00000006,
++0x02b,0x00000709,
++0x02b,0x0005b333,
++0x02c,0x0000000d,
++0x02a,0x00000007,
++0x02b,0x00000709,
++0x02b,0x00063333,
++0x02c,0x0000000d,
++0x02a,0x00000008,
++0x02b,0x0000060a,
++0x02b,0x0004b333,
++0x02c,0x0000000d,
++0x02a,0x00000009,
++0x02b,0x0000060a,
++0x02b,0x00053333,
++0x02c,0x0000000d,
++0x02a,0x0000000a,
++0x02b,0x0000060a,
++0x02b,0x0005b333,
++0x02c,0x0000000d,
++0x02a,0x0000000b,
++0x02b,0x0000060a,
++0x02b,0x00063333,
++0x02c,0x0000000d,
++0x02a,0x0000000c,
++0x02b,0x0000060a,
++0x02b,0x0006b333,
++0x02c,0x0000000d,
++0x02a,0x0000000d,
++0x02b,0x0000060a,
++0x02b,0x00073333,
++0x02c,0x0000000d,
++0x02a,0x0000000e,
++0x02b,0x0000050b,
++0x02b,0x00066666,
++0x02c,0x0000001a,
++0x02a,0x000e0000,
++0x010,0x0004000f,
++0x011,0x000e31fc,
++0x010,0x0006000f,
++0x011,0x000ff9f8,
++0x010,0x0002000f,
++0x011,0x000203f9,
++0x010,0x0003000f,
++0x011,0x000ff500,
++0x010,0x00000000,
++0x011,0x00000000,
++0x010,0x0008000f,
++0x011,0x0003f100,
++0x010,0x0009000f,
++0x011,0x00023100,
++0x012,0x00032000,
++0x012,0x00071000,
++0x012,0x000b0000,
++0x012,0x000fc000,
++0x013,0x000287b3,
++0x013,0x000244b7,
++0x013,0x000204ab,
++0x013,0x0001c49f,
++0x013,0x00018493,
++0x013,0x0001429b,
++0x013,0x00010299,
++0x013,0x0000c29c,
++0x013,0x000081a0,
++0x013,0x000040ac,
++0x013,0x00000020,
++0x014,0x0001944c,
++0x014,0x00059444,
++0x014,0x0009944c,
++0x014,0x000d9444,
++0x015,0x0000f405,
++0x015,0x0004f405,
++0x015,0x0008f405,
++0x015,0x000cf405,
++0x016,0x000e0330,
++0x016,0x000a0330,
++0x016,0x00060330,
++0x016,0x00020330,
++0x000,0x00010159,
++0x018,0x0000f401,
++0x0fe,0x00000000,
++0x0fe,0x00000000,
++0x01f,0x00080003,
++0x0fe,0x00000000,
++0x0fe,0x00000000,
++0x01e,0x00044457,
++0x01f,0x00080000,
++0x000,0x00030159,
++};
++
++u32 Rtl8192CURadioB_1TArray[RadioB_1TArrayLength] = {
++0x0, };
++
++
++u32 Rtl8192CURadioA_2T_mCardArray[RadioA_2T_mCardArrayLength] = {
++0x000,0x00030159,
++0x001,0x00031284,
++0x002,0x00098000,
++0x003,0x00018c63,
++0x004,0x000210e7,
++0x009,0x0002044f,
++0x00a,0x0001adb1,
++0x00b,0x00054867,
++0x00c,0x0008992e,
++0x00d,0x0000e52c,
++0x00e,0x00039ce7,
++0x00f,0x00000451,
++0x019,0x00000000,
++0x01a,0x00010255,
++0x01b,0x00060a00,
++0x01c,0x000fc378,
++0x01d,0x000a1250,
++0x01e,0x0004445f,
++0x01f,0x00080001,
++0x020,0x0000b614,
++0x021,0x0006c000,
++0x022,0x00000000,
++0x023,0x00001558,
++0x024,0x00000060,
++0x025,0x00000483,
++0x026,0x0004f000,
++0x027,0x000ec7d9,
++0x028,0x000577c0,
++0x029,0x00004783,
++0x02a,0x00000001,
++0x02b,0x00021334,
++0x02a,0x00000000,
++0x02b,0x00000054,
++0x02a,0x00000001,
++0x02b,0x00000808,
++0x02b,0x00053333,
++0x02c,0x0000000c,
++0x02a,0x00000002,
++0x02b,0x00000808,
++0x02b,0x0005b333,
++0x02c,0x0000000d,
++0x02a,0x00000003,
++0x02b,0x00000808,
++0x02b,0x00063333,
++0x02c,0x0000000d,
++0x02a,0x00000004,
++0x02b,0x00000808,
++0x02b,0x0006b333,
++0x02c,0x0000000d,
++0x02a,0x00000005,
++0x02b,0x00000808,
++0x02b,0x00073333,
++0x02c,0x0000000d,
++0x02a,0x00000006,
++0x02b,0x00000709,
++0x02b,0x0005b333,
++0x02c,0x0000000d,
++0x02a,0x00000007,
++0x02b,0x00000709,
++0x02b,0x00063333,
++0x02c,0x0000000d,
++0x02a,0x00000008,
++0x02b,0x0000060a,
++0x02b,0x0004b333,
++0x02c,0x0000000d,
++0x02a,0x00000009,
++0x02b,0x0000060a,
++0x02b,0x00053333,
++0x02c,0x0000000d,
++0x02a,0x0000000a,
++0x02b,0x0000060a,
++0x02b,0x0005b333,
++0x02c,0x0000000d,
++0x02a,0x0000000b,
++0x02b,0x0000060a,
++0x02b,0x00063333,
++0x02c,0x0000000d,
++0x02a,0x0000000c,
++0x02b,0x0000060a,
++0x02b,0x0006b333,
++0x02c,0x0000000d,
++0x02a,0x0000000d,
++0x02b,0x0000060a,
++0x02b,0x00073333,
++0x02c,0x0000000d,
++0x02a,0x0000000e,
++0x02b,0x0000050b,
++0x02b,0x00066666,
++0x02c,0x0000001a,
++0x02a,0x000e0000,
++0x010,0x0004000f,
++0x011,0x000e31fc,
++0x010,0x0006000f,
++0x011,0x000ff9f8,
++0x010,0x0002000f,
++0x011,0x000203f9,
++0x010,0x0003000f,
++0x011,0x000ff500,
++0x010,0x00000000,
++0x011,0x00000000,
++0x010,0x0008000f,
++0x011,0x0003f100,
++0x010,0x0009000f,
++0x011,0x00023100,
++0x012,0x00032000,
++0x012,0x00071000,
++0x012,0x000b0000,
++0x012,0x000fc000,
++0x013,0x000287b3,
++0x013,0x000244b7,
++0x013,0x000204ab,
++0x013,0x0001c49f,
++0x013,0x00018493,
++0x013,0x0001429b,
++0x013,0x00010299,
++0x013,0x0000c29c,
++0x013,0x000081a0,
++0x013,0x000040ac,
++0x013,0x00000020,
++0x014,0x0001944c,
++0x014,0x00059444,
++0x014,0x0009944c,
++0x014,0x000d9444,
++0x015,0x0000f424,
++0x015,0x0004f424,
++0x015,0x0008f424,
++0x015,0x000cf424,
++0x016,0x000e0330,
++0x016,0x000a0330,
++0x016,0x00060330,
++0x016,0x00020330,
++0x000,0x00010159,
++0x018,0x0000f401,
++0x0fe,0x00000000,
++0x0fe,0x00000000,
++0x01f,0x00080003,
++0x0fe,0x00000000,
++0x0fe,0x00000000,
++0x01e,0x00044457,
++0x01f,0x00080000,
++0x000,0x00030159,
++};
++
++u32 Rtl8192CURadioB_2T_mCardArray[RadioB_2T_mCardArrayLength] = {
++0x000,0x00030159,
++0x001,0x00031284,
++0x002,0x00098000,
++0x003,0x00018c63,
++0x004,0x000210e7,
++0x009,0x0002044f,
++0x00a,0x0001adb1,
++0x00b,0x00054867,
++0x00c,0x0008992e,
++0x00d,0x0000e52c,
++0x00e,0x00039ce7,
++0x00f,0x00000451,
++0x012,0x00032000,
++0x012,0x00071000,
++0x012,0x000b0000,
++0x012,0x000fc000,
++0x013,0x000287af,
++0x013,0x000244b7,
++0x013,0x000204ab,
++0x013,0x0001c49f,
++0x013,0x00018493,
++0x013,0x00014297,
++0x013,0x00010295,
++0x013,0x0000c298,
++0x013,0x0000819c,
++0x013,0x000040a8,
++0x013,0x0000001c,
++0x014,0x0001944c,
++0x014,0x00059444,
++0x014,0x0009944c,
++0x014,0x000d9444,
++0x015,0x0000f424,
++0x015,0x0004f424,
++0x015,0x0008f424,
++0x015,0x000cf424,
++0x016,0x000e0330,
++0x016,0x000a0330,
++0x016,0x00060330,
++0x016,0x00020330,
++};
++
++u32 Rtl8192CURadioA_1T_mCardArray[RadioA_1T_mCardArrayLength] = {
++0x000,0x00030159,
++0x001,0x00031284,
++0x002,0x00098000,
++0x003,0x00018c63,
++0x004,0x000210e7,
++0x009,0x0002044f,
++0x00a,0x0001adb1,
++0x00b,0x00054867,
++0x00c,0x0008992e,
++0x00d,0x0000e52c,
++0x00e,0x00039ce7,
++0x00f,0x00000451,
++0x019,0x00000000,
++0x01a,0x00010255,
++0x01b,0x00060a00,
++0x01c,0x000fc378,
++0x01d,0x000a1250,
++0x01e,0x0004445f,
++0x01f,0x00080001,
++0x020,0x0000b614,
++0x021,0x0006c000,
++0x022,0x00000000,
++0x023,0x00001558,
++0x024,0x00000060,
++0x025,0x00000483,
++0x026,0x0004f200,
++0x027,0x000ec7d9,
++0x028,0x000577c0,
++0x029,0x00004783,
++0x02a,0x00000001,
++0x02b,0x00021334,
++0x02a,0x00000000,
++0x02b,0x00000054,
++0x02a,0x00000001,
++0x02b,0x00000808,
++0x02b,0x00053333,
++0x02c,0x0000000c,
++0x02a,0x00000002,
++0x02b,0x00000808,
++0x02b,0x0005b333,
++0x02c,0x0000000d,
++0x02a,0x00000003,
++0x02b,0x00000808,
++0x02b,0x00063333,
++0x02c,0x0000000d,
++0x02a,0x00000004,
++0x02b,0x00000808,
++0x02b,0x0006b333,
++0x02c,0x0000000d,
++0x02a,0x00000005,
++0x02b,0x00000808,
++0x02b,0x00073333,
++0x02c,0x0000000d,
++0x02a,0x00000006,
++0x02b,0x00000709,
++0x02b,0x0005b333,
++0x02c,0x0000000d,
++0x02a,0x00000007,
++0x02b,0x00000709,
++0x02b,0x00063333,
++0x02c,0x0000000d,
++0x02a,0x00000008,
++0x02b,0x0000060a,
++0x02b,0x0004b333,
++0x02c,0x0000000d,
++0x02a,0x00000009,
++0x02b,0x0000060a,
++0x02b,0x00053333,
++0x02c,0x0000000d,
++0x02a,0x0000000a,
++0x02b,0x0000060a,
++0x02b,0x0005b333,
++0x02c,0x0000000d,
++0x02a,0x0000000b,
++0x02b,0x0000060a,
++0x02b,0x00063333,
++0x02c,0x0000000d,
++0x02a,0x0000000c,
++0x02b,0x0000060a,
++0x02b,0x0006b333,
++0x02c,0x0000000d,
++0x02a,0x0000000d,
++0x02b,0x0000060a,
++0x02b,0x00073333,
++0x02c,0x0000000d,
++0x02a,0x0000000e,
++0x02b,0x0000050b,
++0x02b,0x00066666,
++0x02c,0x0000001a,
++0x02a,0x000e0000,
++0x010,0x0004000f,
++0x011,0x000e31fc,
++0x010,0x0006000f,
++0x011,0x000ff9f8,
++0x010,0x0002000f,
++0x011,0x000203f9,
++0x010,0x0003000f,
++0x011,0x000ff500,
++0x010,0x00000000,
++0x011,0x00000000,
++0x010,0x0008000f,
++0x011,0x0003f100,
++0x010,0x0009000f,
++0x011,0x00023100,
++0x012,0x00032000,
++0x012,0x00071000,
++0x012,0x000b0000,
++0x012,0x000fc000,
++0x013,0x000287b3,
++0x013,0x000244b7,
++0x013,0x000204ab,
++0x013,0x0001c49f,
++0x013,0x00018493,
++0x013,0x0001429b,
++0x013,0x00010299,
++0x013,0x0000c29c,
++0x013,0x000081a0,
++0x013,0x000040ac,
++0x013,0x00000020,
++0x014,0x0001944c,
++0x014,0x00059444,
++0x014,0x0009944c,
++0x014,0x000d9444,
++0x015,0x0000f424,
++0x015,0x0004f424,
++0x015,0x0008f424,
++0x015,0x000cf424,
++0x016,0x000e0330,
++0x016,0x000a0330,
++0x016,0x00060330,
++0x016,0x00020330,
++0x000,0x00010159,
++0x018,0x0000f401,
++0x0fe,0x00000000,
++0x0fe,0x00000000,
++0x01f,0x00080003,
++0x0fe,0x00000000,
++0x0fe,0x00000000,
++0x01e,0x00044457,
++0x01f,0x00080000,
++0x000,0x00030159,
++};
++
++u32 Rtl8192CURadioB_1T_mCardArray[RadioB_1T_mCardArrayLength] = {
++0x0, };
++
++u32 Rtl8192CURadioA_1T_HPArray[RadioA_1T_HPArrayLength] = {
++0x000,0x00030159,
++0x001,0x00031284,
++0x002,0x00098000,
++0x003,0x00018c63,
++0x004,0x000210e7,
++0x009,0x0002044f,
++0x00a,0x0001adb0,
++0x00b,0x00054867,
++0x00c,0x0008992e,
++0x00d,0x0000e529,
++0x00e,0x00039ce7,
++0x00f,0x00000451,
++0x019,0x00000000,
++0x01a,0x00000255,
++0x01b,0x00060a00,
++0x01c,0x000fc378,
++0x01d,0x000a1250,
++0x01e,0x0004445f,
++0x01f,0x00080001,
++0x020,0x0000b614,
++0x021,0x0006c000,
++0x022,0x0000083c,
++0x023,0x00001558,
++0x024,0x00000060,
++0x025,0x00000483,
++0x026,0x0004f000,
++0x027,0x000ec7d9,
++0x028,0x000977c0,
++0x029,0x00004783,
++0x02a,0x00000001,
++0x02b,0x00021334,
++0x02a,0x00000000,
++0x02b,0x00000054,
++0x02a,0x00000001,
++0x02b,0x00000808,
++0x02b,0x00053333,
++0x02c,0x0000000c,
++0x02a,0x00000002,
++0x02b,0x00000808,
++0x02b,0x0005b333,
++0x02c,0x0000000d,
++0x02a,0x00000003,
++0x02b,0x00000808,
++0x02b,0x00063333,
++0x02c,0x0000000d,
++0x02a,0x00000004,
++0x02b,0x00000808,
++0x02b,0x0006b333,
++0x02c,0x0000000d,
++0x02a,0x00000005,
++0x02b,0x00000808,
++0x02b,0x00073333,
++0x02c,0x0000000d,
++0x02a,0x00000006,
++0x02b,0x00000709,
++0x02b,0x0005b333,
++0x02c,0x0000000d,
++0x02a,0x00000007,
++0x02b,0x00000709,
++0x02b,0x00063333,
++0x02c,0x0000000d,
++0x02a,0x00000008,
++0x02b,0x0000060a,
++0x02b,0x0004b333,
++0x02c,0x0000000d,
++0x02a,0x00000009,
++0x02b,0x0000060a,
++0x02b,0x00053333,
++0x02c,0x0000000d,
++0x02a,0x0000000a,
++0x02b,0x0000060a,
++0x02b,0x0005b333,
++0x02c,0x0000000d,
++0x02a,0x0000000b,
++0x02b,0x0000060a,
++0x02b,0x00063333,
++0x02c,0x0000000d,
++0x02a,0x0000000c,
++0x02b,0x0000060a,
++0x02b,0x0006b333,
++0x02c,0x0000000d,
++0x02a,0x0000000d,
++0x02b,0x0000060a,
++0x02b,0x00073333,
++0x02c,0x0000000d,
++0x02a,0x0000000e,
++0x02b,0x0000050b,
++0x02b,0x00066666,
++0x02c,0x0000001a,
++0x02a,0x000e0000,
++0x010,0x0004000f,
++0x011,0x000e31fc,
++0x010,0x0006000f,
++0x011,0x000ff9f8,
++0x010,0x0002000f,
++0x011,0x000203f9,
++0x010,0x0003000f,
++0x011,0x000ff500,
++0x010,0x00000000,
++0x011,0x00000000,
++0x010,0x0008000f,
++0x011,0x0003f100,
++0x010,0x0009000f,
++0x011,0x00023100,
++0x012,0x000d8000,
++0x012,0x00090000,
++0x012,0x00051000,
++0x012,0x00012000,
++0x013,0x00028fb4,
++0x013,0x00024fa8,
++0x013,0x000207a4,
++0x013,0x0001c3b0,
++0x013,0x000183a4,
++0x013,0x00014398,
++0x013,0x000101a4,
++0x013,0x0000c198,
++0x013,0x000080a4,
++0x013,0x00004098,
++0x013,0x00000000,
++0x014,0x0001944c,
++0x014,0x00059444,
++0x014,0x0009944c,
++0x014,0x000d9444,
++0x015,0x0000f405,
++0x015,0x0004f405,
++0x015,0x0008f405,
++0x015,0x000cf405,
++0x016,0x000e0330,
++0x016,0x000a0330,
++0x016,0x00060330,
++0x016,0x00020330,
++0x000,0x00010159,
++0x018,0x0000f401,
++0x0fe,0x00000000,
++0x0fe,0x00000000,
++0x01f,0x00080003,
++0x0fe,0x00000000,
++0x0fe,0x00000000,
++0x01e,0x00044457,
++0x01f,0x00080000,
++0x000,0x00030159,
++};
++
++u32 Rtl8192CURadioB_GM_Array[RadioB_GM_ArrayLength] = {
++0x0, };
++
++// MAC reg V14 - 2011-11-23
++u32 Rtl8192CUMAC_2T_Array[MAC_2T_ArrayLength] = {
++0x420,0x00000080,
++0x423,0x00000000,
++0x430,0x00000000,
++0x431,0x00000000,
++0x432,0x00000000,
++0x433,0x00000001,
++0x434,0x00000004,
++0x435,0x00000005,
++0x436,0x00000006,
++0x437,0x00000007,
++0x438,0x00000000,
++0x439,0x00000000,
++0x43a,0x00000000,
++0x43b,0x00000001,
++0x43c,0x00000004,
++0x43d,0x00000005,
++0x43e,0x00000006,
++0x43f,0x00000007,
++0x440,0x0000005d,
++0x441,0x00000001,
++0x442,0x00000000,
++0x444,0x00000015,
++0x445,0x000000f0,
++0x446,0x0000000f,
++0x447,0x00000000,
++0x458,0x00000041,
++0x459,0x000000a8,
++0x45a,0x00000072,
++0x45b,0x000000b9,
++0x460,0x00000066,
++0x461,0x00000066,
++0x462,0x00000008,
++0x463,0x00000003,
++0x4c8,0x000000ff,
++0x4c9,0x00000008,
++0x4cc,0x000000ff,
++0x4cd,0x000000ff,
++0x4ce,0x00000001,
++0x500,0x00000026,
++0x501,0x000000a2,
++0x502,0x0000002f,
++0x503,0x00000000,
++0x504,0x00000028,
++0x505,0x000000a3,
++0x506,0x0000005e,
++0x507,0x00000000,
++0x508,0x0000002b,
++0x509,0x000000a4,
++0x50a,0x0000005e,
++0x50b,0x00000000,
++0x50c,0x0000004f,
++0x50d,0x000000a4,
++0x50e,0x00000000,
++0x50f,0x00000000,
++0x512,0x0000001c,
++0x514,0x0000000a,
++0x515,0x00000010,
++0x516,0x0000000a,
++0x517,0x00000010,
++0x51a,0x00000016,
++0x524,0x0000000f,
++0x525,0x0000004f,
++0x546,0x00000040,
++0x547,0x00000000,
++0x550,0x00000010,
++0x551,0x00000010,
++0x559,0x00000002,
++0x55a,0x00000002,
++0x55d,0x000000ff,
++0x605,0x00000030,
++0x608,0x0000000e,
++0x609,0x0000002a,
++0x652,0x00000020,
++0x652,0x00000020,
++0x63c,0x00000008,
++0x63d,0x00000008,
++0x63e,0x0000000c,
++0x63f,0x0000000c,
++0x66e,0x00000005,
++0x700,0x00000021,
++0x701,0x00000043,
++0x702,0x00000065,
++0x703,0x00000087,
++0x708,0x00000021,
++0x709,0x00000043,
++0x70a,0x00000065,
++0x70b,0x00000087,
++};
++
++u32 Rtl8192CUMACPHY_Array_PG[MACPHY_Array_PGLength] = {
++0x0, };
++
++u32 Rtl8192CUAGCTAB_2TArray[AGCTAB_2TArrayLength] = {
++0xc78,0x7b000001,
++0xc78,0x7b010001,
++0xc78,0x7b020001,
++0xc78,0x7b030001,
++0xc78,0x7b040001,
++0xc78,0x7b050001,
++0xc78,0x7a060001,
++0xc78,0x79070001,
++0xc78,0x78080001,
++0xc78,0x77090001,
++0xc78,0x760a0001,
++0xc78,0x750b0001,
++0xc78,0x740c0001,
++0xc78,0x730d0001,
++0xc78,0x720e0001,
++0xc78,0x710f0001,
++0xc78,0x70100001,
++0xc78,0x6f110001,
++0xc78,0x6e120001,
++0xc78,0x6d130001,
++0xc78,0x6c140001,
++0xc78,0x6b150001,
++0xc78,0x6a160001,
++0xc78,0x69170001,
++0xc78,0x68180001,
++0xc78,0x67190001,
++0xc78,0x661a0001,
++0xc78,0x651b0001,
++0xc78,0x641c0001,
++0xc78,0x631d0001,
++0xc78,0x621e0001,
++0xc78,0x611f0001,
++0xc78,0x60200001,
++0xc78,0x49210001,
++0xc78,0x48220001,
++0xc78,0x47230001,
++0xc78,0x46240001,
++0xc78,0x45250001,
++0xc78,0x44260001,
++0xc78,0x43270001,
++0xc78,0x42280001,
++0xc78,0x41290001,
++0xc78,0x402a0001,
++0xc78,0x262b0001,
++0xc78,0x252c0001,
++0xc78,0x242d0001,
++0xc78,0x232e0001,
++0xc78,0x222f0001,
++0xc78,0x21300001,
++0xc78,0x20310001,
++0xc78,0x06320001,
++0xc78,0x05330001,
++0xc78,0x04340001,
++0xc78,0x03350001,
++0xc78,0x02360001,
++0xc78,0x01370001,
++0xc78,0x00380001,
++0xc78,0x00390001,
++0xc78,0x003a0001,
++0xc78,0x003b0001,
++0xc78,0x003c0001,
++0xc78,0x003d0001,
++0xc78,0x003e0001,
++0xc78,0x003f0001,
++0xc78,0x7b400001,
++0xc78,0x7b410001,
++0xc78,0x7b420001,
++0xc78,0x7b430001,
++0xc78,0x7b440001,
++0xc78,0x7b450001,
++0xc78,0x7a460001,
++0xc78,0x79470001,
++0xc78,0x78480001,
++0xc78,0x77490001,
++0xc78,0x764a0001,
++0xc78,0x754b0001,
++0xc78,0x744c0001,
++0xc78,0x734d0001,
++0xc78,0x724e0001,
++0xc78,0x714f0001,
++0xc78,0x70500001,
++0xc78,0x6f510001,
++0xc78,0x6e520001,
++0xc78,0x6d530001,
++0xc78,0x6c540001,
++0xc78,0x6b550001,
++0xc78,0x6a560001,
++0xc78,0x69570001,
++0xc78,0x68580001,
++0xc78,0x67590001,
++0xc78,0x665a0001,
++0xc78,0x655b0001,
++0xc78,0x645c0001,
++0xc78,0x635d0001,
++0xc78,0x625e0001,
++0xc78,0x615f0001,
++0xc78,0x60600001,
++0xc78,0x49610001,
++0xc78,0x48620001,
++0xc78,0x47630001,
++0xc78,0x46640001,
++0xc78,0x45650001,
++0xc78,0x44660001,
++0xc78,0x43670001,
++0xc78,0x42680001,
++0xc78,0x41690001,
++0xc78,0x406a0001,
++0xc78,0x266b0001,
++0xc78,0x256c0001,
++0xc78,0x246d0001,
++0xc78,0x236e0001,
++0xc78,0x226f0001,
++0xc78,0x21700001,
++0xc78,0x20710001,
++0xc78,0x06720001,
++0xc78,0x05730001,
++0xc78,0x04740001,
++0xc78,0x03750001,
++0xc78,0x02760001,
++0xc78,0x01770001,
++0xc78,0x00780001,
++0xc78,0x00790001,
++0xc78,0x007a0001,
++0xc78,0x007b0001,
++0xc78,0x007c0001,
++0xc78,0x007d0001,
++0xc78,0x007e0001,
++0xc78,0x007f0001,
++0xc78,0x3800001e,
++0xc78,0x3801001e,
++0xc78,0x3802001e,
++0xc78,0x3803001e,
++0xc78,0x3804001e,
++0xc78,0x3805001e,
++0xc78,0x3806001e,
++0xc78,0x3807001e,
++0xc78,0x3808001e,
++0xc78,0x3c09001e,
++0xc78,0x3e0a001e,
++0xc78,0x400b001e,
++0xc78,0x440c001e,
++0xc78,0x480d001e,
++0xc78,0x4c0e001e,
++0xc78,0x500f001e,
++0xc78,0x5210001e,
++0xc78,0x5611001e,
++0xc78,0x5a12001e,
++0xc78,0x5e13001e,
++0xc78,0x6014001e,
++0xc78,0x6015001e,
++0xc78,0x6016001e,
++0xc78,0x6217001e,
++0xc78,0x6218001e,
++0xc78,0x6219001e,
++0xc78,0x621a001e,
++0xc78,0x621b001e,
++0xc78,0x621c001e,
++0xc78,0x621d001e,
++0xc78,0x621e001e,
++0xc78,0x621f001e,
++};
++
++u32 Rtl8192CUAGCTAB_1TArray[AGCTAB_1TArrayLength] = {
++0xc78,0x7b000001,
++0xc78,0x7b010001,
++0xc78,0x7b020001,
++0xc78,0x7b030001,
++0xc78,0x7b040001,
++0xc78,0x7b050001,
++0xc78,0x7a060001,
++0xc78,0x79070001,
++0xc78,0x78080001,
++0xc78,0x77090001,
++0xc78,0x760a0001,
++0xc78,0x750b0001,
++0xc78,0x740c0001,
++0xc78,0x730d0001,
++0xc78,0x720e0001,
++0xc78,0x710f0001,
++0xc78,0x70100001,
++0xc78,0x6f110001,
++0xc78,0x6e120001,
++0xc78,0x6d130001,
++0xc78,0x6c140001,
++0xc78,0x6b150001,
++0xc78,0x6a160001,
++0xc78,0x69170001,
++0xc78,0x68180001,
++0xc78,0x67190001,
++0xc78,0x661a0001,
++0xc78,0x651b0001,
++0xc78,0x641c0001,
++0xc78,0x631d0001,
++0xc78,0x621e0001,
++0xc78,0x611f0001,
++0xc78,0x60200001,
++0xc78,0x49210001,
++0xc78,0x48220001,
++0xc78,0x47230001,
++0xc78,0x46240001,
++0xc78,0x45250001,
++0xc78,0x44260001,
++0xc78,0x43270001,
++0xc78,0x42280001,
++0xc78,0x41290001,
++0xc78,0x402a0001,
++0xc78,0x262b0001,
++0xc78,0x252c0001,
++0xc78,0x242d0001,
++0xc78,0x232e0001,
++0xc78,0x222f0001,
++0xc78,0x21300001,
++0xc78,0x20310001,
++0xc78,0x06320001,
++0xc78,0x05330001,
++0xc78,0x04340001,
++0xc78,0x03350001,
++0xc78,0x02360001,
++0xc78,0x01370001,
++0xc78,0x00380001,
++0xc78,0x00390001,
++0xc78,0x003a0001,
++0xc78,0x003b0001,
++0xc78,0x003c0001,
++0xc78,0x003d0001,
++0xc78,0x003e0001,
++0xc78,0x003f0001,
++0xc78,0x7b400001,
++0xc78,0x7b410001,
++0xc78,0x7b420001,
++0xc78,0x7b430001,
++0xc78,0x7b440001,
++0xc78,0x7b450001,
++0xc78,0x7a460001,
++0xc78,0x79470001,
++0xc78,0x78480001,
++0xc78,0x77490001,
++0xc78,0x764a0001,
++0xc78,0x754b0001,
++0xc78,0x744c0001,
++0xc78,0x734d0001,
++0xc78,0x724e0001,
++0xc78,0x714f0001,
++0xc78,0x70500001,
++0xc78,0x6f510001,
++0xc78,0x6e520001,
++0xc78,0x6d530001,
++0xc78,0x6c540001,
++0xc78,0x6b550001,
++0xc78,0x6a560001,
++0xc78,0x69570001,
++0xc78,0x68580001,
++0xc78,0x67590001,
++0xc78,0x665a0001,
++0xc78,0x655b0001,
++0xc78,0x645c0001,
++0xc78,0x635d0001,
++0xc78,0x625e0001,
++0xc78,0x615f0001,
++0xc78,0x60600001,
++0xc78,0x49610001,
++0xc78,0x48620001,
++0xc78,0x47630001,
++0xc78,0x46640001,
++0xc78,0x45650001,
++0xc78,0x44660001,
++0xc78,0x43670001,
++0xc78,0x42680001,
++0xc78,0x41690001,
++0xc78,0x406a0001,
++0xc78,0x266b0001,
++0xc78,0x256c0001,
++0xc78,0x246d0001,
++0xc78,0x236e0001,
++0xc78,0x226f0001,
++0xc78,0x21700001,
++0xc78,0x20710001,
++0xc78,0x06720001,
++0xc78,0x05730001,
++0xc78,0x04740001,
++0xc78,0x03750001,
++0xc78,0x02760001,
++0xc78,0x01770001,
++0xc78,0x00780001,
++0xc78,0x00790001,
++0xc78,0x007a0001,
++0xc78,0x007b0001,
++0xc78,0x007c0001,
++0xc78,0x007d0001,
++0xc78,0x007e0001,
++0xc78,0x007f0001,
++0xc78,0x3800001e,
++0xc78,0x3801001e,
++0xc78,0x3802001e,
++0xc78,0x3803001e,
++0xc78,0x3804001e,
++0xc78,0x3805001e,
++0xc78,0x3806001e,
++0xc78,0x3807001e,
++0xc78,0x3808001e,
++0xc78,0x3c09001e,
++0xc78,0x3e0a001e,
++0xc78,0x400b001e,
++0xc78,0x440c001e,
++0xc78,0x480d001e,
++0xc78,0x4c0e001e,
++0xc78,0x500f001e,
++0xc78,0x5210001e,
++0xc78,0x5611001e,
++0xc78,0x5a12001e,
++0xc78,0x5e13001e,
++0xc78,0x6014001e,
++0xc78,0x6015001e,
++0xc78,0x6016001e,
++0xc78,0x6217001e,
++0xc78,0x6218001e,
++0xc78,0x6219001e,
++0xc78,0x621a001e,
++0xc78,0x621b001e,
++0xc78,0x621c001e,
++0xc78,0x621d001e,
++0xc78,0x621e001e,
++0xc78,0x621f001e,
++};
++
++u32 Rtl8192CUAGCTAB_1T_HPArray[AGCTAB_1T_HPArrayLength] = {
++0xc78,0x7b000001,
++0xc78,0x7b010001,
++0xc78,0x7b020001,
++0xc78,0x7b030001,
++0xc78,0x7b040001,
++0xc78,0x7b050001,
++0xc78,0x7b060001,
++0xc78,0x7b070001,
++0xc78,0x7b080001,
++0xc78,0x7a090001,
++0xc78,0x790a0001,
++0xc78,0x780b0001,
++0xc78,0x770c0001,
++0xc78,0x760d0001,
++0xc78,0x750e0001,
++0xc78,0x740f0001,
++0xc78,0x73100001,
++0xc78,0x72110001,
++0xc78,0x71120001,
++0xc78,0x70130001,
++0xc78,0x6f140001,
++0xc78,0x6e150001,
++0xc78,0x6d160001,
++0xc78,0x6c170001,
++0xc78,0x6b180001,
++0xc78,0x6a190001,
++0xc78,0x691a0001,
++0xc78,0x681b0001,
++0xc78,0x671c0001,
++0xc78,0x661d0001,
++0xc78,0x651e0001,
++0xc78,0x641f0001,
++0xc78,0x63200001,
++0xc78,0x62210001,
++0xc78,0x61220001,
++0xc78,0x60230001,
++0xc78,0x46240001,
++0xc78,0x45250001,
++0xc78,0x44260001,
++0xc78,0x43270001,
++0xc78,0x42280001,
++0xc78,0x41290001,
++0xc78,0x402a0001,
++0xc78,0x262b0001,
++0xc78,0x252c0001,
++0xc78,0x242d0001,
++0xc78,0x232e0001,
++0xc78,0x222f0001,
++0xc78,0x21300001,
++0xc78,0x20310001,
++0xc78,0x06320001,
++0xc78,0x05330001,
++0xc78,0x04340001,
++0xc78,0x03350001,
++0xc78,0x02360001,
++0xc78,0x01370001,
++0xc78,0x00380001,
++0xc78,0x00390001,
++0xc78,0x003a0001,
++0xc78,0x003b0001,
++0xc78,0x003c0001,
++0xc78,0x003d0001,
++0xc78,0x003e0001,
++0xc78,0x003f0001,
++0xc78,0x7b400001,
++0xc78,0x7b410001,
++0xc78,0x7b420001,
++0xc78,0x7b430001,
++0xc78,0x7b440001,
++0xc78,0x7b450001,
++0xc78,0x7b460001,
++0xc78,0x7b470001,
++0xc78,0x7b480001,
++0xc78,0x7a490001,
++0xc78,0x794a0001,
++0xc78,0x784b0001,
++0xc78,0x774c0001,
++0xc78,0x764d0001,
++0xc78,0x754e0001,
++0xc78,0x744f0001,
++0xc78,0x73500001,
++0xc78,0x72510001,
++0xc78,0x71520001,
++0xc78,0x70530001,
++0xc78,0x6f540001,
++0xc78,0x6e550001,
++0xc78,0x6d560001,
++0xc78,0x6c570001,
++0xc78,0x6b580001,
++0xc78,0x6a590001,
++0xc78,0x695a0001,
++0xc78,0x685b0001,
++0xc78,0x675c0001,
++0xc78,0x665d0001,
++0xc78,0x655e0001,
++0xc78,0x645f0001,
++0xc78,0x63600001,
++0xc78,0x62610001,
++0xc78,0x61620001,
++0xc78,0x60630001,
++0xc78,0x46640001,
++0xc78,0x45650001,
++0xc78,0x44660001,
++0xc78,0x43670001,
++0xc78,0x42680001,
++0xc78,0x41690001,
++0xc78,0x406a0001,
++0xc78,0x266b0001,
++0xc78,0x256c0001,
++0xc78,0x246d0001,
++0xc78,0x236e0001,
++0xc78,0x226f0001,
++0xc78,0x21700001,
++0xc78,0x20710001,
++0xc78,0x06720001,
++0xc78,0x05730001,
++0xc78,0x04740001,
++0xc78,0x03750001,
++0xc78,0x02760001,
++0xc78,0x01770001,
++0xc78,0x00780001,
++0xc78,0x00790001,
++0xc78,0x007a0001,
++0xc78,0x007b0001,
++0xc78,0x007c0001,
++0xc78,0x007d0001,
++0xc78,0x007e0001,
++0xc78,0x007f0001,
++0xc78,0x3800001e,
++0xc78,0x3801001e,
++0xc78,0x3802001e,
++0xc78,0x3803001e,
++0xc78,0x3804001e,
++0xc78,0x3805001e,
++0xc78,0x3806001e,
++0xc78,0x3807001e,
++0xc78,0x3808001e,
++0xc78,0x3c09001e,
++0xc78,0x3e0a001e,
++0xc78,0x400b001e,
++0xc78,0x440c001e,
++0xc78,0x480d001e,
++0xc78,0x4c0e001e,
++0xc78,0x500f001e,
++0xc78,0x5210001e,
++0xc78,0x5611001e,
++0xc78,0x5a12001e,
++0xc78,0x5e13001e,
++0xc78,0x6014001e,
++0xc78,0x6015001e,
++0xc78,0x6016001e,
++0xc78,0x6217001e,
++0xc78,0x6218001e,
++0xc78,0x6219001e,
++0xc78,0x621a001e,
++0xc78,0x621b001e,
++0xc78,0x621c001e,
++0xc78,0x621d001e,
++0xc78,0x621e001e,
++0xc78,0x621f001e,
++};
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/Hal8192CUHWImg_wowlan.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/Hal8192CUHWImg_wowlan.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/Hal8192CUHWImg_wowlan.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/Hal8192CUHWImg_wowlan.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,2564 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++/*Created on  2011/11/ 8, 14:15*/
++
++#include <basic_types.h>
++#include "Hal8192CUHWImg_wowlan.h"
++
++
++u8 Rtl8192CUFwTSMCWWImgArray[TSMCWWImgArrayLength] = {
++0xc1,0x88,0x02,0x00,0x51,0x00,0x00,0x00,0x03,0x23,0x16,0x43,0x72,0x34,0x00,0x00,
++0x58,0x92,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x02,0x43,0x9d,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x02,0x57,0xcb,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x02,0x5c,0xb6,0x00,0x00,0x00,0x00,0x00,0x02,0x5d,0x99,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0xbb,0x01,0x0c,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe0,0x22,0x50,
++0x06,0xe9,0x25,0x82,0xf8,0xe6,0x22,0xbb,0xfe,0x06,0xe9,0x25,0x82,0xf8,0xe2,0x22,
++0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe4,0x93,0x22,0xbb,0x01,0x06,
++0x89,0x82,0x8a,0x83,0xf0,0x22,0x50,0x02,0xf7,0x22,0xbb,0xfe,0x01,0xf3,0x22,0xf8,
++0xbb,0x01,0x0d,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe8,0xf0,0x22,
++0x50,0x06,0xe9,0x25,0x82,0xc8,0xf6,0x22,0xbb,0xfe,0x05,0xe9,0x25,0x82,0xc8,0xf2,
++0x22,0xc5,0xf0,0xf8,0xa3,0xe0,0x28,0xf0,0xc5,0xf0,0xf8,0xe5,0x82,0x15,0x82,0x70,
++0x02,0x15,0x83,0xe0,0x38,0xf0,0x22,0xbb,0x01,0x10,0xe5,0x82,0x29,0xf5,0x82,0xe5,
++0x83,0x3a,0xf5,0x83,0xe0,0xf5,0xf0,0xa3,0xe0,0x22,0x50,0x09,0xe9,0x25,0x82,0xf8,
++0x86,0xf0,0x08,0xe6,0x22,0xbb,0xfe,0x0a,0xe9,0x25,0x82,0xf8,0xe2,0xf5,0xf0,0x08,
++0xe2,0x22,0xe5,0x83,0x2a,0xf5,0x83,0xe9,0x93,0xf5,0xf0,0xa3,0xe9,0x93,0x22,0xf8,
++0xbb,0x01,0x11,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe8,0xf0,0xe5,
++0xf0,0xa3,0xf0,0x22,0x50,0x09,0xe9,0x25,0x82,0xc8,0xf6,0x08,0xa6,0xf0,0x22,0xbb,
++0xfe,0x09,0xe9,0x25,0x82,0xc8,0xf2,0xe5,0xf0,0x08,0xf2,0x22,0xef,0x4b,0xff,0xee,
++0x4a,0xfe,0xed,0x49,0xfd,0xec,0x48,0xfc,0x22,0xe0,0xfc,0xa3,0xe0,0xfd,0xa3,0xe0,
++0xfe,0xa3,0xe0,0xff,0x22,0xa4,0x25,0x82,0xf5,0x82,0xe5,0xf0,0x35,0x83,0xf5,0x83,
++0x22,0xe0,0xfb,0xa3,0xe0,0xfa,0xa3,0xe0,0xf9,0x22,0xf8,0xe0,0xfb,0xa3,0xa3,0xe0,
++0xf9,0x25,0xf0,0xf0,0xe5,0x82,0x15,0x82,0x70,0x02,0x15,0x83,0xe0,0xfa,0x38,0xf0,
++0x22,0xeb,0xf0,0xa3,0xea,0xf0,0xa3,0xe9,0xf0,0x22,0xd0,0x83,0xd0,0x82,0xf8,0xe4,
++0x93,0x70,0x12,0x74,0x01,0x93,0x70,0x0d,0xa3,0xa3,0x93,0xf8,0x74,0x01,0x93,0xf5,
++0x82,0x88,0x83,0xe4,0x73,0x74,0x02,0x93,0x68,0x60,0xef,0xa3,0xa3,0xa3,0x80,0xdf,
++0xd0,0x83,0xd0,0x82,0xf8,0xe4,0x93,0x70,0x12,0x74,0x01,0x93,0x70,0x0d,0xa3,0xa3,
++0x93,0xf8,0x74,0x01,0x93,0xf5,0x82,0x88,0x83,0xe4,0x73,0x74,0x02,0x93,0xb5,0xf0,
++0x06,0x74,0x03,0x93,0x68,0x60,0xe9,0xa3,0xa3,0xa3,0xa3,0x80,0xd8,0x02,0x43,0xdb,
++0x02,0x50,0x2a,0xe4,0x93,0xa3,0xf8,0xe4,0x93,0xa3,0x40,0x03,0xf6,0x80,0x01,0xf2,
++0x08,0xdf,0xf4,0x80,0x29,0xe4,0x93,0xa3,0xf8,0x54,0x07,0x24,0x0c,0xc8,0xc3,0x33,
++0xc4,0x54,0x0f,0x44,0x20,0xc8,0x83,0x40,0x04,0xf4,0x56,0x80,0x01,0x46,0xf6,0xdf,
++0xe4,0x80,0x0b,0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80,0x90,0x44,0x20,0xe4,0x7e,
++0x01,0x93,0x60,0xbc,0xa3,0xff,0x54,0x3f,0x30,0xe5,0x09,0x54,0x1f,0xfe,0xe4,0x93,
++0xa3,0x60,0x01,0x0e,0xcf,0x54,0xc0,0x25,0xe0,0x60,0xa8,0x40,0xb8,0xe4,0x93,0xa3,
++0xfa,0xe4,0x93,0xa3,0xf8,0xe4,0x93,0xa3,0xc8,0xc5,0x82,0xc8,0xca,0xc5,0x83,0xca,
++0xf0,0xa3,0xc8,0xc5,0x82,0xc8,0xca,0xc5,0x83,0xca,0xdf,0xe9,0xde,0xe7,0x80,0xbe,
++0x41,0x91,0x40,0x00,0x41,0x91,0x9c,0x00,0x41,0x91,0x23,0x80,0x41,0x91,0x24,0x80,
++0x41,0x91,0x9e,0x00,0x41,0x91,0x52,0x00,0x41,0x91,0x93,0x00,0x41,0x91,0x91,0x00,
++0x41,0x91,0x90,0x00,0x41,0x91,0x92,0x00,0x00,0xf0,0x90,0x91,0x30,0xe0,0x90,0x91,
++0x67,0xf0,0xe4,0xfb,0xfd,0x7f,0x54,0x7e,0x01,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,
++0x90,0x91,0x65,0xeb,0xf0,0xa3,0xe0,0xfb,0xa3,0xe0,0xf5,0x44,0xe4,0xf5,0x45,0x12,
++0x35,0xab,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x01,0x5f,0xe4,0xf0,0x90,0x01,0x3c,0x74,
++0x08,0xf0,0xe4,0x90,0x91,0x66,0xf0,0x90,0x91,0x2d,0xe0,0x90,0x91,0x67,0xf0,0xe4,
++0xfb,0xfd,0x7f,0x5c,0x7e,0x01,0x91,0x59,0x90,0x01,0x5f,0x74,0x05,0xf0,0x90,0x06,
++0x92,0x74,0x02,0xf0,0x90,0x91,0x36,0x14,0xf0,0xe5,0x6e,0x54,0x0f,0xc3,0x94,0x0c,
++0x50,0x02,0xf1,0x23,0x22,0x90,0x02,0x84,0xef,0xf0,0xa3,0xee,0xf0,0xa3,0x74,0x05,
++0xf0,0x22,0x7d,0x01,0xaf,0x6f,0xe1,0x27,0xf1,0xe6,0xbf,0x01,0x10,0x90,0x91,0x42,
++0xe0,0xff,0xe4,0xfd,0x12,0x48,0x22,0x90,0x04,0x1f,0x74,0x20,0xf0,0x22,0x8f,0x82,
++0x8e,0x83,0xa3,0xa3,0xa3,0xe4,0xf0,0x22,0xe4,0xf5,0x72,0x7f,0x60,0x7e,0x01,0x80,
++0xed,0x7f,0x00,0x22,0x90,0x91,0x53,0xe0,0x54,0xfe,0xf0,0x02,0x50,0xd6,0x22,0xe4,
++0xf5,0x75,0x22,0x02,0x5f,0xe2,0x02,0x5f,0xe9,0xef,0x8e,0xf0,0x71,0x70,0x45,0x26,
++0x00,0x40,0x45,0x4e,0x00,0x80,0x45,0x79,0x01,0x00,0x45,0x8d,0x02,0x00,0x45,0xa5,
++0x04,0x00,0x00,0x00,0x45,0xc2,0xed,0x54,0x3f,0x70,0x04,0xfe,0xff,0x80,0x04,0x7e,
++0x00,0x7f,0x40,0xef,0x2d,0xff,0xee,0x3c,0xfe,0xef,0x78,0x06,0xce,0xc3,0x13,0xce,
++0x13,0xd8,0xf9,0x78,0x06,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0x80,0x26,0xed,0x54,
++0x7f,0x70,0x04,0xfe,0xff,0x80,0x04,0x7e,0x00,0x7f,0x80,0xef,0x2d,0xff,0xee,0x3c,
++0xfe,0xef,0x78,0x07,0xce,0xc3,0x13,0xce,0x13,0xd8,0xf9,0x78,0x07,0xc3,0x33,0xce,
++0x33,0xce,0xd8,0xf9,0xfd,0xac,0x06,0x80,0x49,0xed,0x70,0x04,0xfe,0xff,0x80,0x04,
++0x7e,0x01,0x7f,0x00,0xef,0x2d,0xee,0x3c,0x7d,0x00,0xfc,0x80,0x35,0xec,0x54,0x01,
++0x4d,0x70,0x04,0xfe,0xff,0x80,0x04,0x7e,0x02,0x7f,0x00,0xef,0x2d,0xee,0x3c,0xc3,
++0x13,0x7d,0x00,0x80,0x1a,0xec,0x54,0x03,0x4d,0x70,0x04,0xfe,0xff,0x80,0x04,0x7e,
++0x04,0x7f,0x00,0xef,0x2d,0xee,0x3c,0x13,0x13,0x54,0x3f,0x7d,0x00,0x25,0xe0,0x25,
++0xe0,0xfc,0xae,0x04,0xaf,0x05,0x22,0x90,0x91,0x09,0x12,0x2a,0x8b,0x00,0x00,0x00,
++0x00,0x90,0x06,0xa9,0xe0,0x90,0x91,0x08,0xf0,0xe0,0x54,0xc0,0x70,0x0a,0x53,0x71,
++0xfe,0x53,0x71,0xfd,0x91,0xc2,0x80,0x47,0x90,0x91,0x26,0xe0,0x60,0x41,0x90,0x91,
++0x38,0xe0,0x70,0x3b,0x90,0x91,0x38,0x74,0x01,0xf0,0x7f,0x00,0x7e,0x08,0x12,0x27,
++0xde,0x90,0x91,0x09,0x12,0x2a,0x7f,0x90,0x91,0x09,0x71,0x09,0xec,0x44,0x02,0xfc,
++0x90,0x91,0x09,0x12,0x2a,0x7f,0x90,0x91,0x09,0x71,0x09,0x90,0x80,0x85,0x12,0x2a,
++0x7f,0x7f,0x00,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x02,0x86,0xe0,0x54,0xfb,0xf0,0x90,
++0x91,0x08,0xe0,0x30,0xe6,0x13,0x43,0x71,0x01,0x90,0x91,0x3b,0xe0,0x64,0x02,0x60,
++0x04,0x91,0xc8,0x80,0x07,0x91,0x77,0x80,0x03,0x53,0x71,0xfe,0x90,0x91,0x08,0xe0,
++0x30,0xe7,0x16,0x43,0x71,0x02,0xe4,0x90,0x91,0x66,0x91,0x49,0x90,0x01,0x57,0x74,
++0x05,0xf0,0x90,0x91,0x3c,0x74,0x01,0xf0,0x22,0x53,0x71,0xfd,0x22,0xd3,0x10,0xaf,
++0x01,0xc3,0xc0,0xd0,0x8b,0x60,0x8a,0x61,0x89,0x62,0x90,0x91,0x68,0x71,0x41,0xab,
++0x63,0xaa,0x64,0xa9,0x65,0x90,0x91,0x6b,0x71,0x41,0xaf,0x66,0x15,0x66,0xef,0x60,
++0x1b,0x90,0x91,0x6b,0xe4,0x75,0xf0,0x01,0x71,0x2a,0x12,0x29,0xd9,0xff,0x90,0x91,
++0x68,0xe4,0x75,0xf0,0x01,0x71,0x2a,0xef,0x51,0x4d,0x80,0xde,0xab,0x60,0xaa,0x61,
++0xa9,0x62,0xd0,0xd0,0x92,0xaf,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,
++0x6e,0x71,0x41,0x90,0x91,0x9e,0xe0,0xff,0x04,0xf0,0x90,0x00,0x01,0xef,0x51,0x5f,
++0x7f,0xaf,0x7e,0x01,0x12,0x64,0x1c,0xef,0x60,0x44,0x90,0x91,0x6e,0x71,0x21,0x8b,
++0x63,0x8a,0x64,0x89,0x65,0x75,0x66,0x02,0x7b,0x01,0x7a,0x01,0x79,0xa0,0xd1,0x6d,
++0x90,0x91,0x71,0x71,0x21,0x8b,0x63,0x8a,0x64,0x89,0x65,0x90,0x91,0x6e,0x71,0x21,
++0x12,0x29,0xd9,0xff,0xc4,0x54,0x0f,0xf5,0x66,0x7b,0x01,0x7a,0x01,0x79,0xa2,0xd1,
++0x6d,0x90,0x01,0xaf,0x74,0xff,0xf0,0x90,0x01,0xcb,0xe0,0x64,0x80,0xf0,0xd0,0xd0,
++0x92,0xaf,0x22,0x7d,0x01,0x7f,0x0c,0x90,0x91,0x95,0xed,0xf0,0x90,0x91,0x94,0xef,
++0xf0,0x54,0x0f,0xff,0xe5,0x6e,0x54,0x0f,0x6f,0x60,0x76,0x90,0x91,0x94,0xe0,0x30,
++0xe2,0x30,0xe5,0x6e,0x20,0xe2,0x05,0x7f,0x01,0x12,0x62,0x65,0xe5,0x6e,0x30,0xe3,
++0x0f,0x90,0x91,0x94,0xe0,0x20,0xe3,0x08,0x12,0x5a,0x3f,0xef,0x60,0x53,0x80,0x52,
++0xe5,0x6e,0x20,0xe3,0x4c,0x90,0x91,0x94,0xe0,0x30,0xe3,0x45,0xa3,0xe0,0xff,0x02,
++0x62,0x4a,0xe5,0x6e,0x54,0x0f,0xff,0xbf,0x0c,0x0f,0x90,0x91,0x94,0xe0,0x20,0xe3,
++0x08,0x12,0x5a,0x3f,0xef,0x60,0x2a,0xf1,0xb2,0xe5,0x6e,0x54,0x0f,0xff,0xbf,0x04,
++0x10,0x90,0x91,0x94,0xe0,0x20,0xe2,0x09,0x12,0x5b,0xb3,0xef,0x60,0x13,0x12,0x48,
++0xce,0xe5,0x6e,0x54,0x0f,0xff,0xbf,0x02,0x08,0x91,0xf1,0xef,0x60,0x03,0x12,0x63,
++0x56,0x22,0x90,0x06,0x04,0xe0,0x44,0x40,0xf0,0xe5,0x6d,0xb4,0x01,0x04,0x7f,0x01,
++0xf1,0xc9,0x53,0x6e,0xf0,0x43,0x6e,0x04,0x22,0x8f,0x67,0xf1,0xe6,0xbf,0x01,0x15,
++0x90,0x91,0x43,0x12,0x48,0x1e,0xad,0x07,0xac,0x06,0xaf,0x67,0x12,0x61,0xa3,0x90,
++0x04,0x1f,0x74,0x20,0xf0,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x01,0xc4,
++0x74,0xe6,0xf0,0x74,0x47,0xa3,0xf0,0x90,0x04,0x1d,0xe0,0x60,0x1a,0x90,0x05,0x22,
++0xe0,0x54,0x90,0x60,0x07,0x90,0x01,0xc6,0xe0,0x44,0x40,0xf0,0x90,0x01,0xc7,0xe0,
++0x30,0xe1,0xe4,0x7f,0x00,0x80,0x02,0x7f,0x01,0xd0,0xd0,0x92,0xaf,0x22,0xe0,0xff,
++0x7d,0x01,0x90,0x91,0x74,0xef,0xf0,0xa3,0xed,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xe5,
++0x70,0x60,0x04,0xe4,0xff,0x11,0xb3,0x90,0x91,0x74,0xe0,0x30,0xe0,0x09,0x90,0x91,
++0x76,0xe4,0xf0,0xa3,0x74,0x80,0xf0,0x90,0x91,0x74,0xe0,0xff,0xc3,0x13,0x90,0xfd,
++0x10,0xf0,0x90,0x04,0x25,0xef,0xf0,0x90,0x91,0x75,0xe0,0x60,0x1f,0xa3,0xa3,0xe0,
++0xff,0x24,0x0f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x80,0xf0,0x74,0x10,
++0x2f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x80,0xf0,0x90,0x91,0x76,0xa3,
++0xe0,0xff,0xfd,0x24,0x08,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe4,0xf0,0x74,0x09,
++0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xf0,0xf0,0x74,0x21,0x2f,0xf5,
++0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xf7,0xf0,0x90,0x91,0x76,0xe0,0xfe,0xa3,
++0xe0,0xff,0x22,0xef,0x60,0x0b,0x90,0x91,0x51,0xe0,0xb4,0x01,0x10,0xe4,0xff,0x80,
++0x09,0x90,0x91,0x51,0xe0,0xb4,0x01,0x05,0x7f,0x01,0x12,0x68,0x87,0x22,0x90,0x01,
++0x37,0x74,0x02,0xf0,0x90,0x05,0x22,0x74,0xff,0xf0,0x12,0x68,0x46,0xef,0x70,0x06,
++0x90,0x01,0xc8,0x74,0xfd,0xf0,0x7d,0x02,0x7f,0x03,0x12,0x36,0xe6,0xe5,0x70,0x60,
++0x04,0x7f,0x01,0x11,0xb3,0x51,0x0c,0x53,0x6e,0xf0,0x43,0x6e,0x02,0x22,0xef,0x64,
++0x01,0x70,0x42,0x7d,0x78,0x7f,0x02,0x12,0x36,0x75,0x7d,0x02,0x7f,0x03,0x12,0x36,
++0x75,0x90,0x01,0x36,0x74,0x03,0xf0,0xfd,0x7f,0x02,0x12,0x36,0xe6,0x7d,0x10,0x7f,
++0x03,0x12,0x36,0x92,0x90,0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x12,
++0x47,0x23,0xe4,0xff,0x11,0xb3,0x90,0x06,0x04,0xe0,0x54,0x7f,0xf0,0x90,0x06,0x0a,
++0xe0,0x54,0xf8,0xf0,0x22,0x90,0x01,0x36,0x74,0x7b,0xf0,0xa3,0x74,0x02,0xf0,0x7d,
++0x7b,0xff,0x12,0x36,0xe6,0x7d,0x02,0x7f,0x03,0x12,0x36,0xe6,0x7d,0x10,0x7f,0x03,
++0x12,0x36,0x92,0x90,0x06,0x04,0xe0,0x44,0x80,0xf0,0x90,0x06,0x0a,0xe0,0x44,0x07,
++0xf0,0x12,0x64,0x11,0xe5,0x6d,0x20,0xe0,0x05,0xe4,0x90,0x91,0x29,0xf0,0x22,0x8b,
++0x0e,0x8a,0x0f,0x89,0x10,0x12,0x62,0x3e,0xab,0x0e,0xaa,0x0f,0xa9,0x10,0x12,0x29,
++0xd9,0xf5,0x70,0x14,0x60,0x0e,0x14,0x60,0x1e,0x14,0x60,0x2f,0x24,0x03,0x70,0x40,
++0x7f,0x01,0x80,0x3a,0xab,0x0e,0xaa,0x0f,0xa9,0x10,0x90,0x00,0x02,0x12,0x42,0x20,
++0xfd,0xe4,0xff,0x31,0xe1,0x80,0x27,0xab,0x0e,0xaa,0x0f,0xa9,0x10,0x90,0x00,0x02,
++0x12,0x42,0x20,0xfd,0x7f,0x01,0x31,0xe1,0x1f,0x80,0x13,0xab,0x0e,0xaa,0x0f,0xa9,
++0x10,0x90,0x00,0x02,0x12,0x42,0x20,0xfd,0x7f,0x02,0x31,0xe1,0xe4,0xff,0x11,0xfe,
++0x22,0xef,0x24,0xfe,0x60,0x0b,0x04,0x70,0x22,0x90,0x91,0x39,0x74,0x01,0xf0,0x80,
++0x16,0xed,0x70,0x0a,0x90,0x91,0x35,0xe0,0x90,0x91,0x39,0xf0,0x80,0x05,0x90,0x91,
++0x39,0xed,0xf0,0x90,0x91,0x39,0xe0,0x90,0x91,0x27,0xf0,0x22,0x7f,0x78,0x7e,0x08,
++0x12,0x27,0xde,0x90,0x90,0xd8,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x27,0xde,
++0x90,0x90,0xdc,0x12,0x2a,0x7f,0x7f,0x00,0x7e,0x08,0x12,0x27,0xde,0x90,0x90,0xe0,
++0x12,0x2a,0x7f,0x90,0x91,0x51,0xe0,0x90,0x90,0xd8,0xb4,0x01,0x0d,0x12,0x43,0x09,
++0xef,0x54,0xc7,0xff,0xed,0x54,0xc7,0xfd,0x80,0x07,0x12,0x43,0x09,0xef,0x54,0xc7,
++0xff,0xec,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x78,0x7e,0x08,0x12,0x2f,0xd9,0x90,
++0x90,0xdc,0x12,0x43,0x09,0xef,0x54,0x0f,0xff,0xec,0x90,0x80,0x85,0x12,0x2a,0x7f,
++0x7f,0x04,0x7e,0x0c,0x12,0x2f,0xd9,0x90,0x90,0xe0,0x12,0x43,0x09,0xef,0x44,0x02,
++0xff,0xec,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x00,0x7e,0x08,0x12,0x2f,0xd9,0x7f,
++0x70,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0xe4,0x12,0x2a,0x7f,0x90,0x80,0x85,0x12,
++0x2a,0x8b,0x00,0x1b,0x25,0xa0,0x7f,0x70,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x59,
++0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe4,0xfd,0xff,0x12,0x34,0x81,0x90,0x91,0x51,
++0xe0,0xb4,0x01,0x11,0x90,0x80,0x59,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe4,0xfd,
++0x7f,0x01,0x12,0x34,0x81,0x90,0x00,0x11,0xe0,0x54,0xf6,0xf0,0x80,0x08,0xf4,0xff,
++0x90,0x00,0x43,0xe0,0x5f,0xf0,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x7f,0x10,0xdf,
++0xfe,0xd0,0xd0,0x92,0xaf,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,0x9b,
++0xed,0xf0,0x90,0x91,0x9a,0xef,0xf0,0xd3,0x94,0x07,0x50,0x63,0xe0,0xff,0x74,0x01,
++0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x47,0xe0,0x5f,
++0xf0,0x51,0xe6,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,
++0x33,0xd8,0xfc,0xff,0x90,0x00,0x46,0xe0,0x4f,0xf0,0x51,0xe6,0x90,0x91,0x9b,0xe0,
++0x60,0x16,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,
++0xd8,0xfc,0xff,0x90,0x00,0x45,0x80,0x66,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8,
++0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x45,0x80,0x6b,0x90,
++0x91,0x9a,0xe0,0x24,0xf8,0xf0,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,
++0x33,0xd8,0xfc,0xc4,0x54,0xf0,0x51,0xde,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8,
++0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xff,0x90,0x00,0x43,0xe0,0x4f,0xf0,0x51,
++0xe6,0x90,0x91,0x9b,0xe0,0x60,0x1b,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8,0x07,
++0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0,0xff,0x90,0x00,0x42,0xe0,0x4f,
++0x80,0x1a,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,
++0xd8,0xfc,0xc4,0x54,0xf0,0xf4,0xff,0x90,0x00,0x42,0xe0,0x5f,0xf0,0x51,0xe6,0xd0,
++0xd0,0x92,0xaf,0x22,0xf0,0x90,0x00,0x45,0xe0,0x54,0xfe,0xfd,0x7f,0x45,0xd3,0x10,
++0xaf,0x01,0xc3,0xc0,0xd0,0x8f,0x82,0x75,0x83,0x00,0xed,0xf0,0x51,0xe6,0xd0,0xd0,
++0x92,0xaf,0x22,0xef,0x14,0x60,0x30,0x14,0x60,0x66,0x24,0x02,0x60,0x02,0x81,0xaa,
++0x90,0x90,0xf3,0x74,0x02,0xf0,0x90,0x00,0x48,0xe0,0x44,0x0c,0xfd,0x7f,0x48,0x71,
++0xee,0x90,0x00,0x47,0xe0,0x44,0x08,0xfd,0x7f,0x47,0x71,0xee,0x90,0x00,0x45,0xe0,
++0x44,0x10,0xfd,0x7f,0x45,0x80,0x71,0xe4,0x90,0x90,0xf3,0xf0,0x90,0x90,0xef,0x12,
++0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9,0x90,
++0x00,0x45,0xe0,0x44,0xef,0xfd,0x7f,0x45,0x71,0xee,0x90,0x00,0x45,0xe0,0x54,0xef,
++0xfd,0x7f,0x45,0x71,0xee,0x90,0x00,0x46,0xe0,0x44,0x10,0xfd,0x7f,0x46,0x80,0x38,
++0x90,0x90,0xf3,0x74,0x01,0xf0,0x90,0x90,0xf9,0x12,0x43,0x09,0x90,0x80,0x85,0x12,
++0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x00,0x45,0xe0,0x44,0x20,0xfd,
++0x7f,0x45,0x71,0xee,0x90,0x00,0x45,0xe0,0x44,0x10,0xfd,0x7f,0x45,0x71,0xee,0x90,
++0x00,0x46,0xe0,0x44,0x10,0xfd,0x7f,0x46,0x71,0xee,0x22,0x90,0x00,0x02,0x12,0x42,
++0x20,0x90,0x90,0xf5,0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0x25,0xe0,0x25,0xe0,0x90,
++0x90,0xf4,0xf0,0x12,0x29,0xd9,0x25,0xe0,0x25,0xe0,0x90,0x90,0xf8,0xf0,0x90,0x05,
++0x60,0xe0,0x90,0x91,0x03,0xf0,0x90,0x05,0x61,0xe0,0x90,0x91,0x04,0xf0,0x90,0x05,
++0x62,0xe0,0x90,0x91,0x05,0xf0,0x90,0x05,0x63,0xe0,0x90,0x91,0x06,0xf0,0xa2,0xaf,
++0xe4,0x33,0x90,0x91,0x1c,0xf0,0xc2,0xaf,0x90,0x90,0xf4,0xe0,0xff,0x12,0x6e,0x67,
++0x90,0x91,0x1c,0xe0,0x24,0xff,0x92,0xaf,0x90,0x90,0xf5,0xe0,0x70,0x02,0xa1,0xb2,
++0x90,0x90,0xf4,0xe0,0x70,0x02,0xa1,0xb2,0x90,0x90,0xf8,0xe0,0x70,0x02,0xa1,0xb2,
++0xa2,0xaf,0xe4,0x33,0x90,0x91,0x1c,0xf0,0xc2,0xaf,0x90,0x91,0x07,0x74,0x01,0xf0,
++0x90,0x91,0x1c,0xe0,0x24,0xff,0x92,0xaf,0x71,0xe5,0x90,0x00,0x46,0xe0,0x44,0x01,
++0xfd,0x7f,0x46,0x71,0xee,0x90,0x90,0xed,0xe0,0x60,0x15,0x90,0x90,0xf9,0x12,0x43,
++0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9,0x80,0x06,
++0x90,0x05,0x22,0x74,0x7f,0xf0,0x90,0x00,0x45,0xe0,0x54,0xef,0xfd,0x7f,0x45,0x71,
++0xee,0x90,0x05,0x87,0xe0,0x64,0x80,0xf0,0x90,0x91,0x03,0xe0,0x90,0x05,0x84,0xf0,
++0x90,0x91,0x04,0xe0,0x90,0x05,0x85,0xf0,0x90,0x91,0x05,0xe0,0x90,0x05,0x86,0xf0,
++0x90,0x91,0x06,0xe0,0x90,0x05,0x87,0xf0,0xa2,0xaf,0xe4,0x33,0x90,0x91,0x1c,0xf0,
++0xc2,0xaf,0x90,0x01,0x3c,0xe0,0x44,0x20,0xf0,0x7d,0x20,0xe4,0xff,0x12,0x37,0x00,
++0x80,0x2b,0x90,0x90,0xf5,0xe0,0x70,0x2d,0x90,0x91,0x07,0x71,0xe4,0x90,0x00,0x46,
++0xe0,0x54,0xfe,0xfd,0x7f,0x46,0x71,0xee,0x90,0x05,0x22,0xe4,0xf0,0xa2,0xaf,0x33,
++0x90,0x91,0x1c,0xf0,0xc2,0xaf,0x7d,0x20,0xe4,0xff,0x12,0x36,0x92,0x90,0x91,0x1c,
++0xe0,0x24,0xff,0x92,0xaf,0x22,0x8b,0x0e,0x8a,0x0f,0x89,0x10,0x90,0x00,0x02,0x12,
++0x42,0x20,0x90,0x90,0xf6,0xf0,0xe0,0x30,0xe0,0x4b,0x90,0x90,0xed,0x74,0x01,0xf0,
++0x7f,0x80,0x7e,0x08,0x12,0x27,0xde,0x90,0x90,0xef,0x12,0x2a,0x7f,0xab,0x0e,0xaa,
++0x0f,0xa9,0x10,0x90,0x00,0x01,0x12,0x42,0x20,0xff,0xe4,0xfc,0xfd,0xfe,0x78,0x1a,
++0x12,0x2a,0x6c,0xa8,0x04,0xa9,0x05,0xaa,0x06,0xab,0x07,0x90,0x90,0xef,0x12,0x43,
++0x09,0xec,0x54,0x03,0xfc,0x12,0x42,0xfc,0x90,0x90,0xf9,0x12,0x2a,0x7f,0x90,0x05,
++0x22,0xe4,0xf0,0x80,0x2d,0xe4,0x90,0x90,0xed,0xf0,0x7f,0x80,0x7e,0x08,0x12,0x27,
++0xde,0xec,0x54,0x03,0xfc,0xec,0x44,0xc0,0xfc,0x90,0x90,0xef,0x12,0x2a,0x7f,0x90,
++0x90,0xef,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,
++0x2f,0xd9,0x90,0x90,0xf6,0xe0,0x30,0xe1,0x19,0x7d,0x0c,0x7f,0x47,0x71,0xee,0x90,
++0x00,0x48,0xe0,0x44,0x0c,0xfd,0x7f,0x48,0x71,0xee,0x90,0x00,0x46,0xe0,0x44,0x10,
++0x80,0x1c,0x90,0x00,0x47,0xe0,0x54,0xf3,0xfd,0x7f,0x47,0x71,0xee,0x90,0x00,0x48,
++0xe0,0x54,0xf3,0xfd,0x7f,0x48,0x71,0xee,0x90,0x00,0x46,0xe0,0x54,0xef,0xfd,0x7f,
++0x46,0x71,0xee,0xe4,0x90,0x90,0xf3,0xf0,0x22,0x90,0x01,0x3c,0x74,0xff,0xf0,0xa3,
++0xf0,0xa3,0xf0,0x90,0x01,0x34,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xfd,0x7f,0x54,
++0x71,0xee,0x7d,0xff,0x7f,0x55,0x71,0xee,0x7d,0xff,0x7f,0x56,0x71,0xee,0x7d,0xff,
++0x7f,0x57,0x61,0xee,0x90,0x01,0x30,0xe4,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,
++0x01,0x38,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xfd,0x7f,0x50,0x71,0xee,0xe4,0xfd,
++0x7f,0x51,0x71,0xee,0xe4,0xfd,0x7f,0x52,0x71,0xee,0xe4,0xfd,0x7f,0x53,0x61,0xee,
++0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,0x22,0xed,0xf0,0x90,0x91,0x21,0xef,
++0xf0,0xd3,0x94,0x07,0x50,0x4e,0xa3,0xe0,0x70,0x1a,0x90,0x91,0x21,0xe0,0xff,0x74,
++0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x47,0xe0,
++0x5f,0xf0,0x80,0x17,0x90,0x91,0x21,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,
++0xc3,0x33,0xd8,0xfc,0xff,0x90,0x00,0x47,0xe0,0x4f,0xf0,0x51,0xe6,0x90,0x91,0x21,
++0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,
++0x00,0x46,0x80,0x59,0x90,0x91,0x21,0xe0,0x24,0xf8,0xf0,0xa3,0xe0,0x70,0x1d,0x90,
++0x91,0x21,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xc4,
++0x54,0xf0,0xf4,0xff,0x90,0x00,0x43,0xe0,0x5f,0xf0,0x80,0x1a,0x90,0x91,0x21,0xe0,
++0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0,0xff,
++0x90,0x00,0x43,0xe0,0x4f,0xf0,0x51,0xe6,0x90,0x91,0x21,0xe0,0xff,0x74,0x01,0xa8,
++0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x43,0xe0,0x5f,0xf0,
++0x51,0xe6,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x00,0x49,0xe0,0x90,0x91,0x9f,0xf0,0xe0,
++0x54,0x0f,0xf0,0x44,0xf0,0xfd,0x7f,0x49,0x71,0xee,0x90,0x91,0x9f,0xe0,0x44,0xb0,
++0xfd,0x7f,0x49,0x61,0xee,0x12,0x47,0xe6,0xbf,0x01,0x10,0x90,0x02,0x09,0xe0,0xff,
++0x7d,0x01,0x12,0x48,0x22,0x90,0x04,0x1f,0x74,0x20,0xf0,0x22,0x75,0x28,0x33,0xe4,
++0xf5,0x29,0x75,0x2a,0x07,0xf5,0x2b,0x90,0x01,0x30,0xe5,0x28,0xf0,0xa3,0xe5,0x29,
++0xf0,0xa3,0xe5,0x2a,0xf0,0xa3,0xe5,0x2b,0xf0,0x22,0xe4,0x90,0x91,0x0e,0xf0,0xa3,
++0xf0,0x75,0x8e,0x02,0xf1,0x25,0xd1,0xe8,0x90,0x91,0x4f,0xef,0xf0,0xf1,0x0b,0x90,
++0x91,0x51,0xef,0xf0,0xf1,0x60,0x90,0x91,0x3d,0xee,0xf0,0xa3,0xef,0xf0,0xe4,0xf5,
++0x57,0xf1,0x02,0x12,0x61,0xc4,0x12,0x32,0x3d,0x12,0x44,0xff,0x11,0x0c,0xf1,0x36,
++0xd1,0xfb,0xd1,0xd0,0x12,0x44,0xfe,0x31,0x13,0x12,0x44,0xf4,0x12,0x6e,0x09,0x90,
++0x91,0x10,0xe5,0xd9,0xf0,0x12,0x4e,0xb9,0xc2,0xaf,0x90,0x00,0x80,0xe0,0x44,0x40,
++0xf0,0x12,0x4a,0xe6,0x75,0xe8,0x03,0x43,0xa8,0x85,0xd2,0xaf,0x90,0x91,0x0e,0xe0,
++0x64,0x01,0xf0,0x24,0x2a,0x90,0x01,0xc4,0xf0,0x74,0x50,0xa3,0xf0,0xe5,0x57,0x30,
++0xe2,0x10,0x12,0x5f,0xf0,0xbf,0x01,0x0a,0xc2,0xaf,0x53,0x57,0xfb,0xd2,0xaf,0x12,
++0x71,0x97,0xe5,0x57,0x30,0xe4,0x0a,0xc2,0xaf,0x53,0x57,0xef,0xd2,0xaf,0x12,0x60,
++0x2d,0x90,0x90,0xf7,0xe0,0x70,0x03,0x12,0x70,0x74,0x11,0xe7,0x90,0x91,0x3f,0xe0,
++0x90,0x01,0xba,0xf0,0x80,0xb6,0xe4,0x90,0x91,0x55,0xf0,0x90,0x91,0x53,0xe0,0x54,
++0x7f,0xf0,0xa3,0x74,0x0a,0xf0,0x22,0x90,0x06,0x34,0xe0,0x60,0x25,0x14,0x70,0x1b,
++0x7b,0x01,0x7a,0x06,0x79,0x35,0x7f,0xf9,0x7e,0x01,0x12,0x67,0xe4,0xbf,0x01,0x09,
++0x90,0x06,0x35,0xe0,0x54,0x0f,0xf0,0x80,0x04,0x80,0x00,0xe1,0x17,0xe4,0x90,0x06,
++0x34,0xf0,0x22,0x90,0x91,0x56,0xe0,0x54,0xfe,0xf0,0xe0,0x54,0x7f,0xf0,0x90,0x01,
++0x17,0xe0,0xfe,0x90,0x01,0x16,0xe0,0x7c,0x00,0x24,0x00,0xff,0xec,0x3e,0x90,0x91,
++0x5c,0xf0,0xa3,0xef,0xf0,0x90,0x01,0x04,0xe0,0x54,0x0f,0x90,0x91,0x1c,0xf0,0xe0,
++0xff,0x74,0x40,0x7e,0x00,0xa8,0x07,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,
++0xf9,0x90,0x91,0x5b,0xf0,0xee,0x90,0x91,0x5a,0xf0,0x90,0x91,0x5e,0xe0,0x54,0xfe,
++0xf0,0xe0,0x54,0xfd,0xf0,0xe0,0x54,0xfb,0xf0,0xe0,0x54,0xf7,0xf0,0xe0,0x54,0xef,
++0xf0,0xe0,0x54,0xdf,0xf0,0xe0,0x54,0xbf,0xf0,0xe0,0x54,0x7f,0xf0,0xe4,0xa3,0xf0,
++0xa3,0xf0,0xa3,0xe0,0x54,0xfe,0xf0,0xe0,0x54,0xfd,0xf0,0xe0,0x54,0xf7,0xf0,0x22,
++0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x12,0x29,0xd9,0x54,0x01,0xff,0x90,0x91,0x56,
++0xe0,0x54,0xfe,0x4f,0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0x90,0x91,0x57,0xf0,0x90,
++0x00,0x02,0x12,0x42,0x20,0x90,0x91,0x58,0xf0,0x90,0x91,0x56,0xe0,0x30,0xe0,0x1a,
++0x90,0x06,0x09,0xe0,0x54,0xfe,0xf0,0x90,0x02,0x86,0xe0,0x44,0x04,0xf0,0x43,0x57,
++0x04,0x7d,0x08,0xe4,0xff,0x12,0x36,0xe6,0x80,0x12,0x7d,0x08,0xe4,0xff,0x12,0x36,
++0x75,0x90,0x02,0x86,0xe0,0x54,0xfb,0xf0,0x31,0xf1,0x31,0x13,0xd0,0xd0,0x92,0xaf,
++0x22,0x90,0x06,0x90,0xe4,0xf0,0x21,0x5a,0x90,0x91,0x19,0x12,0x43,0x41,0xef,0x12,
++0x43,0x4a,0x52,0x30,0x01,0x52,0x39,0x02,0x52,0x5b,0x03,0x52,0x64,0x09,0x52,0x6c,
++0x0c,0x52,0x75,0x0d,0x52,0x7d,0x0e,0x52,0x8e,0x1a,0x52,0x96,0x2c,0x52,0x41,0x2d,
++0x52,0x4a,0x2e,0x52,0x9e,0x30,0x52,0x53,0x3b,0x52,0x86,0x3c,0x00,0x00,0x52,0xa6,
++0x90,0x91,0x19,0x12,0x43,0x21,0x02,0x64,0x72,0x90,0x91,0x19,0x12,0x43,0x21,0xc1,
++0xf5,0x90,0x91,0x19,0x12,0x43,0x21,0x02,0x65,0x8d,0x90,0x91,0x19,0x12,0x43,0x21,
++0x02,0x65,0xd5,0x90,0x91,0x19,0x12,0x43,0x21,0xe1,0x4b,0x90,0x91,0x19,0x12,0x43,
++0x21,0x02,0x66,0x0e,0x90,0x91,0x19,0x12,0x43,0x21,0x80,0x42,0x90,0x91,0x19,0x12,
++0x43,0x21,0x02,0x4c,0xab,0x90,0x91,0x19,0x12,0x43,0x21,0xe1,0x98,0x90,0x91,0x19,
++0x12,0x43,0x21,0x02,0x4d,0xe6,0x90,0x91,0x19,0x12,0x43,0x21,0x21,0x90,0x90,0x91,
++0x19,0x12,0x43,0x21,0xa1,0x9b,0x90,0x91,0x19,0x12,0x43,0x21,0x81,0x7a,0x90,0x91,
++0x19,0x12,0x43,0x21,0xe1,0x78,0x90,0x01,0xc6,0xe0,0x44,0x01,0xf0,0x22,0xd3,0x10,
++0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,0x1c,0x12,0x43,0x41,0x90,0x91,0x1c,0x12,0x43,
++0x21,0x90,0x00,0x01,0x12,0x42,0x97,0xfa,0xe5,0xf0,0x24,0x00,0xff,0xe4,0x3a,0xfe,
++0x90,0x91,0x1c,0x12,0x43,0x21,0x90,0x00,0x01,0xee,0x8f,0xf0,0x12,0x42,0xcf,0x12,
++0x29,0xd9,0xff,0x60,0x2c,0xb5,0x72,0x16,0x90,0x91,0x1c,0x12,0x43,0x21,0x90,0x00,
++0x01,0x12,0x42,0x97,0x65,0x74,0x70,0x04,0xe5,0x73,0x65,0xf0,0x60,0x23,0x90,0x91,
++0x1c,0x12,0x43,0x21,0x90,0x00,0x01,0x12,0x42,0x97,0xff,0xae,0xf0,0x71,0x26,0x80,
++0x10,0x90,0x91,0x1c,0x12,0x43,0x21,0x12,0x29,0xd9,0x65,0x72,0x60,0x03,0x12,0x44,
++0xe8,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x91,0x1f,0xee,0xf0,0xa3,0xef,0xf0,0x75,0x72,
++0x01,0x8e,0x73,0xf5,0x74,0xe4,0xfd,0x7f,0x0b,0x12,0x4f,0x10,0xe4,0xfd,0x7f,0x02,
++0x12,0x4f,0x10,0x71,0x6a,0xe4,0xff,0x71,0xcc,0xe4,0xf5,0x76,0x90,0x01,0xc9,0xe5,
++0x76,0xf0,0x90,0x91,0x1f,0xe0,0xfc,0xa3,0xe0,0xfd,0xec,0xfb,0x8d,0x44,0xe4,0xf5,
++0x45,0x7d,0x01,0x7f,0x60,0x7e,0x01,0x02,0x35,0xab,0x7f,0x0b,0x71,0xd9,0xef,0x65,
++0x75,0x60,0x10,0xe5,0x75,0xb4,0x01,0x05,0xe4,0xf5,0x75,0x80,0x03,0x75,0x75,0x01,
++0x7f,0x01,0x22,0x7f,0x00,0x22,0xe5,0x72,0x64,0x01,0x70,0x3f,0x71,0x6a,0xbf,0x01,
++0x04,0x7f,0x01,0x71,0xcc,0x90,0x00,0x46,0xe0,0x44,0x04,0xfd,0x7f,0x46,0x12,0x4b,
++0xee,0x90,0x00,0x44,0xe0,0x54,0xfb,0xfd,0x7f,0x44,0x12,0x4b,0xee,0x90,0x00,0x46,
++0xe0,0x54,0xfb,0xfd,0x7f,0x46,0x12,0x4b,0xee,0x7f,0x02,0x71,0xd9,0x8f,0x76,0x90,
++0x01,0xc9,0xe5,0x76,0xf0,0xb4,0x01,0x03,0x12,0x4f,0xd7,0x22,0x90,0x01,0xca,0xe5,
++0x75,0xf0,0xef,0x60,0x03,0x12,0x4f,0xd7,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,
++0x90,0x91,0xa0,0xef,0xf0,0xd3,0x94,0x07,0x50,0x47,0xe0,0xff,0x74,0x01,0xa8,0x07,
++0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x46,0xe0,0x5f,0xf0,0x12,
++0x4a,0xe6,0x90,0x91,0xa0,0xe0,0xfd,0x74,0x01,0x7e,0x00,0xa8,0x05,0x08,0x80,0x05,
++0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x00,0x44,0xe0,0xfb,0xe4,0xfe,0xef,
++0x5b,0xa8,0x05,0x08,0x80,0x06,0xce,0xa2,0xe7,0x13,0xce,0x13,0xd8,0xf8,0xff,0x80,
++0x44,0x90,0x91,0xa0,0xe0,0x24,0xf8,0xf0,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,
++0x02,0xc3,0x33,0xd8,0xfc,0x12,0x4a,0xde,0x90,0x91,0xa0,0xe0,0xfd,0x74,0x01,0x7e,
++0x00,0xa8,0x05,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x00,
++0x42,0xe0,0xfb,0xe4,0xfe,0xef,0x5b,0xa8,0x05,0x08,0x80,0x06,0xce,0xa2,0xe7,0x13,
++0xce,0x13,0xd8,0xf8,0xff,0xd0,0xd0,0x92,0xaf,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,
++0xd0,0xe4,0xf5,0x10,0x75,0x11,0x04,0xf5,0x12,0xf5,0x14,0xf5,0x15,0x90,0x02,0x09,
++0xe0,0xff,0x12,0x29,0xd9,0xfe,0xef,0x2e,0xf5,0x13,0x30,0xe0,0x08,0x75,0x0e,0x00,
++0x75,0x0f,0x80,0x80,0x05,0xe4,0xf5,0x0e,0xf5,0x0f,0xe5,0x13,0xc3,0x13,0x90,0xfd,
++0x10,0xf0,0x74,0x20,0x25,0x10,0xf5,0x10,0xad,0x0f,0xe5,0x10,0x2d,0xff,0x24,0x01,
++0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x90,0x91,0x47,0xf0,0x74,0x02,0x2f,0xf5,
++0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0xfe,0xe5,0x10,0x2d,0x24,0x03,0xf5,0x82,0xe4,
++0x34,0xfc,0xf5,0x83,0xe0,0x24,0x00,0xff,0xe4,0x3e,0x90,0x91,0x48,0xf0,0xa3,0xef,
++0xf0,0x7f,0x04,0xe5,0x10,0x25,0x0f,0x2f,0x24,0x00,0xf5,0x82,0xe4,0x34,0xfc,0xf5,
++0x83,0xe0,0xfe,0x74,0x46,0x2f,0xf5,0x82,0xe4,0x34,0x91,0xf5,0x83,0xee,0xf0,0x0f,
++0xbf,0x08,0xe0,0x12,0x66,0x56,0xef,0x70,0x3f,0x90,0x01,0xc3,0xe0,0x60,0x25,0xc3,
++0xe5,0x15,0x94,0xe8,0xe5,0x14,0x94,0x03,0x40,0x09,0x90,0x01,0xc6,0xe0,0x44,0x10,
++0xf0,0x80,0x63,0x05,0x15,0xe5,0x15,0x70,0x02,0x05,0x14,0x7f,0x0a,0x7e,0x00,0x12,
++0x37,0x54,0x80,0xd5,0x90,0x01,0xc6,0xe0,0x90,0x01,0xc3,0x30,0xe2,0x05,0x74,0xfe,
++0xf0,0x80,0x43,0x74,0xff,0xf0,0x80,0x3e,0xe5,0x10,0xb4,0x78,0x23,0xe4,0xf5,0x10,
++0x05,0x13,0xe5,0x0f,0x64,0x80,0x45,0x0e,0x70,0x06,0xf5,0x0e,0xf5,0x0f,0x80,0x06,
++0x75,0x0e,0x00,0x75,0x0f,0x80,0xe5,0x13,0xc3,0x13,0x90,0xfd,0x10,0xf0,0x80,0x06,
++0x74,0x08,0x25,0x10,0xf5,0x10,0xe5,0x12,0x15,0x12,0x70,0x02,0x15,0x11,0xe5,0x12,
++0x45,0x11,0x60,0x02,0x81,0xb8,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x91,0x1c,0x12,0x43,
++0x41,0x12,0x29,0xd9,0xff,0x54,0x01,0xfe,0x90,0x91,0x5e,0xe0,0x54,0xfe,0x4e,0xf0,
++0xef,0x54,0x04,0xff,0xe0,0x54,0xfb,0x4f,0xf0,0x12,0x29,0xd9,0xff,0x54,0x02,0xfe,
++0x90,0x91,0x5e,0xe0,0x54,0xfd,0x4e,0xf0,0xef,0x54,0x08,0xff,0xe0,0x54,0xf7,0x4f,
++0xf0,0x12,0x29,0xd9,0xff,0x54,0x10,0xfe,0x90,0x91,0x5e,0xe0,0x54,0xef,0x4e,0xf0,
++0xef,0x54,0x20,0xff,0xe0,0x54,0xdf,0x4f,0xf0,0x12,0x29,0xd9,0xff,0x54,0x40,0xfe,
++0x90,0x91,0x5e,0xe0,0x54,0xbf,0x4e,0xf0,0xef,0x54,0x80,0xff,0xe0,0x54,0x7f,0x4f,
++0xf0,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x91,0x60,0xf0,0x90,0x00,0x01,0x12,0x42,
++0x20,0x90,0x91,0x5f,0xf0,0x90,0x00,0x03,0x12,0x42,0x20,0xff,0x54,0x01,0xfe,0x90,
++0x91,0x61,0xe0,0x54,0xfe,0x4e,0xf0,0xef,0x54,0x02,0xff,0xe0,0x54,0xfd,0x4f,0xf0,
++0x90,0x00,0x03,0x12,0x42,0x20,0x54,0x04,0xff,0x90,0x91,0x61,0xe0,0x54,0xfb,0x4f,
++0xf0,0x90,0x91,0x5e,0xe0,0x54,0x01,0x90,0x01,0xb8,0xf0,0x90,0x91,0x5e,0xe0,0xff,
++0xc4,0x13,0x54,0x01,0x90,0x01,0xb9,0xf0,0x90,0x91,0x61,0xe0,0x54,0x01,0x90,0x01,
++0xba,0xf0,0xa3,0x74,0xff,0xf0,0x12,0x29,0xd9,0x20,0xe0,0x02,0x21,0xf1,0xe4,0xfd,
++0x7f,0x81,0x12,0x4b,0xee,0x90,0x91,0x1c,0x12,0x43,0x21,0x12,0x29,0xd9,0xff,0xc3,
++0x13,0x30,0xe0,0x07,0x90,0x06,0x90,0xe0,0x44,0x02,0xf0,0xef,0x13,0x13,0x54,0x3f,
++0x30,0xe0,0x07,0x90,0x06,0x90,0xe0,0x44,0x04,0xf0,0x12,0x29,0xd9,0x13,0x13,0x13,
++0x54,0x1f,0x30,0xe0,0x07,0x90,0x06,0x90,0xe0,0x44,0x08,0xf0,0x90,0x91,0x61,0xe0,
++0x30,0xe0,0x1c,0x90,0x91,0x5e,0xe0,0xc4,0x13,0x54,0x07,0x30,0xe0,0x07,0xa3,0xe0,
++0xff,0xe4,0xfd,0x80,0x07,0x90,0x91,0x5f,0xe0,0xff,0x7d,0x01,0x12,0x4a,0xf6,0x22,
++0x75,0x30,0x1f,0x75,0x31,0x01,0xe4,0xf5,0x32,0x90,0x01,0x38,0xe5,0x30,0xf0,0xa3,
++0xe5,0x31,0xf0,0xa3,0xe5,0x32,0xf0,0x22,0x90,0x00,0x02,0xe0,0x54,0xe0,0x7f,0x01,
++0x60,0x02,0x7f,0x00,0x22,0x12,0x29,0xd9,0xf5,0x6d,0x22,0x90,0x01,0x64,0x74,0xa0,
++0xf0,0x22,0x90,0x91,0x51,0xe0,0x90,0x90,0xe8,0xf0,0x22,0x90,0x00,0xf3,0xe0,0x7f,
++0x00,0x30,0xe3,0x02,0x7f,0x01,0x22,0x90,0x06,0x34,0x74,0xff,0xf0,0xe4,0xa3,0xf0,
++0xa3,0xf0,0xa3,0xf0,0x22,0xe4,0x90,0x91,0x4e,0xf0,0x90,0x00,0x80,0xe0,0x44,0x80,
++0xfd,0x7f,0x80,0x02,0x4b,0xee,0x90,0x00,0xf3,0xe0,0x30,0xe2,0x0d,0x90,0x05,0x41,
++0x74,0x10,0xf0,0x90,0x05,0x5a,0xf0,0xa3,0xe4,0xf0,0x22,0x12,0x29,0xd9,0x60,0x02,
++0x80,0x01,0xe4,0x90,0x91,0x31,0xf0,0x90,0x91,0x31,0xe0,0x90,0x01,0xe7,0xf0,0x22,
++0x90,0x91,0x51,0xe0,0xb4,0x01,0x0c,0x90,0x00,0xf2,0xe0,0x30,0xe7,0x05,0x7e,0xfd,
++0x7f,0x33,0x22,0x7e,0xfd,0x7f,0x2f,0x22,0x12,0x29,0xd9,0xff,0x54,0x01,0xfe,0x90,
++0x91,0x53,0xe0,0x54,0xfe,0x4e,0xf0,0xef,0xc3,0x13,0x30,0xe0,0x0a,0x90,0x00,0x01,
++0x12,0x42,0x20,0x90,0x91,0x54,0xf0,0x22,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x90,
++0xf7,0xf0,0xe0,0x60,0x04,0xe0,0xf4,0x70,0x21,0xa2,0xaf,0xe4,0x33,0xf5,0x0e,0xc2,
++0xaf,0x90,0x00,0x47,0xe0,0x54,0xfb,0xfd,0x7f,0x47,0x12,0x4b,0xee,0x7d,0x40,0x7f,
++0x01,0x12,0x36,0xaf,0xe5,0x0e,0x24,0xff,0x92,0xaf,0x22,0xc0,0xe0,0xc0,0xf0,0xc0,
++0x83,0xc0,0x82,0xc0,0xd0,0x75,0xd0,0x00,0xc0,0x00,0xc0,0x01,0xc0,0x02,0xc0,0x03,
++0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0x90,0x01,0xc4,0x74,0xcb,0xf0,0x74,0x57,
++0xa3,0xf0,0x90,0x01,0x34,0xe0,0x55,0x28,0xf5,0x2c,0x90,0x01,0x36,0xe0,0x55,0x2a,
++0xf5,0x2e,0xa3,0xe0,0x55,0x2b,0xf5,0x2f,0xe5,0x2c,0x30,0xe0,0x5a,0x90,0x01,0x34,
++0x74,0x01,0xf0,0x85,0xd9,0x54,0xe5,0x70,0x14,0x24,0xfd,0x50,0x02,0x80,0x48,0x90,
++0x91,0x3b,0xe0,0x60,0x3a,0x90,0x01,0x5b,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x04,0xf0,
++0x51,0x30,0xef,0x64,0x01,0x70,0x30,0x90,0x91,0x66,0xf0,0x90,0x91,0x2d,0xe0,0x90,
++0x91,0x67,0xf0,0xe4,0xfb,0xfd,0x7f,0x58,0x7e,0x01,0x12,0x44,0x59,0x90,0x01,0x5b,
++0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x01,0xf0,0x90,0x91,0x37,0xf0,0x80,0x08,0x51,
++0x30,0xbf,0x01,0x03,0x12,0x44,0xc2,0xe5,0x2c,0x30,0xe1,0x20,0x90,0x01,0x34,0x74,
++0x02,0xf0,0x85,0xd1,0x58,0x85,0xd2,0x59,0x85,0xd3,0x5a,0x85,0xd4,0x5b,0x85,0xd5,
++0x5c,0x85,0xd6,0x5d,0x85,0xd7,0x5e,0x85,0xd9,0x5f,0x71,0x5c,0xe5,0x2c,0x30,0xe3,
++0x10,0x90,0x01,0x34,0x74,0x08,0xf0,0x90,0x91,0x56,0xe0,0x30,0xe0,0x03,0x43,0x57,
++0x04,0xe5,0x2c,0x30,0xe4,0x09,0x90,0x01,0x34,0x74,0x10,0xf0,0x43,0x57,0x10,0xe5,
++0x2c,0x30,0xe5,0x26,0x90,0x01,0xcf,0xe0,0x30,0xe5,0x1f,0xe0,0x54,0xdf,0xf0,0x90,
++0x01,0x34,0x74,0x20,0xf0,0x75,0xa8,0x00,0x75,0xe8,0x00,0x12,0x4e,0xe4,0x90,0x00,
++0x03,0xe0,0x54,0xfb,0xf0,0x12,0x4a,0xe6,0x80,0xfe,0xe5,0x2c,0x30,0xe6,0x06,0x90,
++0x01,0x34,0x74,0x40,0xf0,0xe5,0x2e,0x30,0xe0,0x13,0x90,0x91,0x50,0x74,0x01,0xf0,
++0x90,0x01,0x36,0xf0,0x91,0x23,0x51,0x87,0x90,0x91,0x50,0xe4,0xf0,0xe5,0x2e,0x30,
++0xe1,0x3c,0x90,0x01,0x36,0x74,0x02,0xf0,0x43,0x57,0x40,0x90,0x01,0x02,0xe0,0x54,
++0x03,0x64,0x01,0x70,0x29,0x90,0x01,0x37,0xe0,0x30,0xe0,0x0a,0x74,0x01,0xf0,0x90,
++0x91,0x40,0xe4,0xf0,0x80,0x18,0x90,0x91,0x40,0xe0,0x04,0xf0,0xe0,0xc3,0x94,0x0a,
++0x40,0x0c,0xe4,0xf0,0x90,0x04,0x19,0xe0,0x30,0xe0,0x03,0x12,0x4f,0xf5,0xe5,0x2e,
++0x30,0xe2,0x19,0x90,0x01,0x36,0x74,0x04,0xf0,0x90,0x91,0x3a,0xe4,0xf0,0x90,0x05,
++0x58,0x74,0x03,0xf0,0x51,0xd8,0x90,0x91,0x3f,0xe0,0x04,0xf0,0xe5,0x2e,0x30,0xe3,
++0x28,0x90,0x01,0x36,0x74,0x08,0xf0,0xe5,0x6d,0x64,0x01,0x70,0x1c,0xe5,0x70,0x60,
++0x18,0x90,0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x90,0x91,0x66,0xe4,
++0x12,0x44,0x49,0x90,0x01,0x57,0x74,0x05,0xf0,0xe5,0x2e,0x30,0xe4,0x2b,0x90,0x01,
++0x36,0x74,0x10,0xf0,0xe5,0x6d,0xb4,0x01,0x20,0xe5,0x70,0x60,0x1c,0x90,0x01,0x57,
++0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x90,0x91,0x3c,0xe4,0xf0,0x53,0x71,0xfd,
++0xe5,0x71,0x54,0x07,0x70,0x03,0x12,0x44,0xc2,0xe5,0x2e,0x30,0xe5,0x1f,0x90,0x01,
++0x36,0x74,0x20,0xf0,0xe5,0x6d,0xb4,0x01,0x14,0xe5,0x70,0x60,0x10,0x90,0x91,0x3b,
++0xe0,0x64,0x02,0x60,0x05,0x12,0x44,0xc8,0x80,0x03,0x12,0x44,0x77,0xe5,0x2e,0x30,
++0xe6,0x1b,0x90,0x01,0x36,0x74,0x40,0xf0,0xe5,0x6d,0xb4,0x01,0x10,0xe5,0x70,0x60,
++0x0c,0x53,0x71,0xfe,0xe5,0x71,0x54,0x07,0x70,0x03,0x12,0x44,0xc2,0xe5,0x2f,0x30,
++0xe1,0x08,0x90,0x01,0x37,0x74,0x02,0xf0,0x71,0x7e,0x74,0xcb,0x04,0x90,0x01,0xc4,
++0xf0,0x74,0x57,0xa3,0xf0,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04,0xd0,0x03,0xd0,
++0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,0xd0,0x82,0xd0,0x83,0xd0,0xf0,0xd0,0xe0,0x32,
++0x90,0x04,0x1b,0xe0,0x54,0x7f,0x64,0x7f,0x7f,0x01,0x60,0x02,0x7f,0x00,0x22,0x51,
++0x30,0xef,0x64,0x01,0x60,0x08,0x90,0x01,0xb9,0x74,0x01,0xf0,0x80,0x30,0x90,0x91,
++0x37,0xe0,0x60,0x08,0x90,0x01,0xb9,0x74,0x02,0xf0,0x80,0x22,0x90,0x91,0x36,0xe0,
++0x60,0x08,0x90,0x01,0xb9,0x74,0x04,0xf0,0x80,0x14,0xe5,0x6f,0x54,0x0f,0xd3,0x94,
++0x04,0x40,0x08,0x90,0x01,0xb9,0x74,0x08,0xf0,0x80,0x03,0x7f,0x01,0x22,0x90,0x01,
++0xb8,0x74,0x08,0xf0,0x7f,0x00,0x22,0x90,0x91,0x53,0xe0,0x30,0xe0,0x49,0xe5,0x6d,
++0x64,0x01,0x70,0x43,0x90,0x91,0x52,0xe0,0x04,0xf0,0xe5,0x70,0x64,0x03,0x60,0x05,
++0xe5,0x70,0xb4,0x06,0x0d,0x90,0x91,0x52,0xe0,0xff,0x74,0x01,0xd3,0x9f,0x50,0x14,
++0x80,0x07,0x90,0x91,0x52,0xe0,0xb4,0x0a,0x0b,0x90,0x91,0x55,0xe0,0x04,0xf0,0xe4,
++0x90,0x91,0x52,0xf0,0x90,0x91,0x55,0xe0,0xff,0x90,0x91,0x54,0xe0,0xb5,0x07,0x07,
++0x71,0x4e,0xe4,0x90,0x91,0x55,0xf0,0x22,0xe5,0x6d,0x64,0x01,0x70,0x63,0xe5,0x70,
++0x60,0x5f,0xe5,0x70,0x64,0x02,0x60,0x06,0xe5,0x70,0x64,0x05,0x70,0x27,0x90,0x06,
++0xab,0xe0,0x90,0x91,0x27,0xf0,0x90,0x06,0xaa,0xe0,0x90,0x91,0x39,0xf0,0x90,0x91,
++0x27,0xe0,0x70,0x07,0x90,0x91,0x39,0xe0,0xff,0x80,0x05,0x90,0x91,0x27,0xe0,0xff,
++0x90,0x91,0x27,0xef,0xf0,0x90,0x91,0x29,0xe0,0x60,0x03,0xe0,0x14,0xf0,0xe4,0x90,
++0x91,0x28,0xf0,0x90,0x01,0x57,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x53,0x71,0xfd,
++0x53,0x71,0xef,0xe5,0x70,0x14,0x24,0xfd,0x50,0x02,0x80,0x03,0x12,0x45,0xc7,0x71,
++0x42,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0xd0,0xd0,0x92,0xaf,0x22,0xe5,0x6e,
++0x30,0xe3,0x04,0xe4,0xff,0x80,0x02,0x7f,0x01,0x02,0x47,0xc9,0x90,0x91,0x08,0xe0,
++0x54,0xf0,0x44,0x03,0xf0,0x54,0x0f,0x44,0x80,0xf0,0x7b,0x00,0x7a,0x00,0x79,0x58,
++0x90,0x91,0x71,0x12,0x43,0x41,0x0b,0x7a,0x91,0x79,0x08,0x02,0x46,0xb7,0x90,0x91,
++0x80,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe5,0x70,0x14,0x24,0xfd,0x50,0x02,0x80,
++0x21,0x90,0x91,0x3b,0xe0,0x60,0x06,0x7d,0x01,0x7f,0x0c,0x80,0x0d,0xe5,0x6e,0x54,
++0x0f,0xc3,0x94,0x04,0x50,0x07,0x7d,0x01,0x7f,0x04,0x12,0x47,0x27,0xe4,0xff,0x12,
++0x48,0xb3,0x22,0x51,0x30,0xef,0x64,0x01,0x60,0x08,0x90,0x01,0xb9,0x74,0x01,0xf0,
++0x80,0x58,0xe5,0x71,0x54,0x03,0x60,0x08,0x90,0x01,0xb9,0x74,0x02,0xf0,0x80,0x4a,
++0xe5,0x6f,0x54,0x0f,0xd3,0x94,0x02,0x40,0x08,0x90,0x01,0xb9,0x74,0x04,0xf0,0x80,
++0x39,0xe5,0x71,0x30,0xe2,0x08,0x90,0x01,0xb9,0x74,0x08,0xf0,0x80,0x2c,0xe5,0x71,
++0x30,0xe4,0x08,0x90,0x01,0xb9,0x74,0x10,0xf0,0x80,0x1f,0x90,0x91,0x29,0xe0,0x60,
++0x08,0x90,0x01,0xb9,0x74,0x20,0xf0,0x80,0x11,0x90,0x91,0x31,0xe0,0x60,0x08,0x90,
++0x01,0xb9,0x74,0x80,0xf0,0x80,0x03,0x7f,0x01,0x22,0x90,0x01,0xb8,0x74,0x04,0xf0,
++0x7f,0x00,0x22,0xe4,0xfb,0x90,0x91,0x78,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe5,
++0x70,0x70,0x02,0x81,0xb5,0xe5,0x6d,0x64,0x01,0x70,0x7a,0xe5,0x70,0x14,0x60,0x2b,
++0x24,0xfd,0x60,0x27,0x24,0x02,0x24,0xfb,0x50,0x02,0x80,0x21,0x90,0x91,0x27,0xe0,
++0x14,0xf0,0xe0,0x60,0x04,0xa3,0xe0,0x60,0x14,0x90,0x91,0x27,0xe0,0x70,0x08,0x90,
++0x91,0x39,0xe0,0x90,0x91,0x27,0xf0,0x7b,0x01,0x80,0x02,0x7b,0x01,0xeb,0x60,0x45,
++0x43,0x71,0x10,0xe4,0x90,0x91,0x66,0xf0,0x90,0x91,0x3a,0xe0,0x75,0xf0,0x05,0xa4,
++0xff,0x90,0x91,0x34,0xe0,0x2f,0x12,0x44,0x4e,0x90,0x01,0x57,0x74,0x05,0xf0,0xe5,
++0x6e,0x54,0x0f,0xc3,0x94,0x04,0x50,0x07,0x7d,0x01,0x7f,0x04,0x12,0x47,0x27,0x90,
++0x91,0x2e,0xe0,0x60,0x10,0x90,0x91,0x2c,0xe0,0x90,0x07,0x78,0x60,0x04,0x74,0x0d,
++0xf0,0x22,0x74,0x09,0xf0,0x22,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0,0x82,0xc0,0xd0,
++0x75,0xd0,0x00,0xc0,0x00,0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0xc0,
++0x06,0xc0,0x07,0x90,0x01,0xc4,0x74,0xb6,0xf0,0x74,0x5c,0xa3,0xf0,0x53,0x91,0xef,
++0x90,0x00,0x51,0xe0,0xff,0x90,0x00,0x55,0xe0,0x5f,0xf5,0x3d,0x90,0x00,0x52,0xe0,
++0xff,0x90,0x00,0x56,0xe0,0x5f,0xf5,0x3e,0xe5,0x3d,0x30,0xe4,0x06,0x90,0x00,0x55,
++0x74,0x10,0xf0,0xe5,0x3d,0x30,0xe5,0x06,0x90,0x00,0x55,0x74,0x20,0xf0,0xe5,0x3d,
++0x30,0xe6,0x1b,0x90,0x00,0x55,0x74,0x40,0xf0,0x90,0x90,0xf6,0xe0,0x54,0x03,0xff,
++0xbf,0x03,0x0b,0x90,0x90,0xf3,0xe0,0x60,0x05,0x7f,0x01,0x12,0x4c,0x03,0xe5,0x3d,
++0x30,0xe7,0x15,0x90,0x00,0x55,0x74,0x80,0xf0,0x90,0x90,0xf6,0xe0,0x54,0x03,0xff,
++0xbf,0x03,0x05,0x7f,0x02,0x12,0x4c,0x03,0xe5,0x3e,0x30,0xe0,0x06,0x90,0x00,0x56,
++0x74,0x01,0xf0,0xe5,0x3e,0x30,0xe1,0x06,0x90,0x00,0x56,0x74,0x02,0xf0,0xe5,0x3e,
++0x30,0xe2,0x06,0x90,0x00,0x56,0x74,0x04,0xf0,0xe5,0x3e,0x30,0xe3,0x06,0x90,0x00,
++0x56,0x74,0x08,0xf0,0x90,0x01,0xc4,0x74,0xb6,0xf0,0x74,0x5c,0xa3,0xf0,0xd0,0x07,
++0xd0,0x06,0xd0,0x05,0xd0,0x04,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,
++0xd0,0x82,0xd0,0x83,0xd0,0xf0,0xd0,0xe0,0x32,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0,
++0x82,0xc0,0xd0,0x75,0xd0,0x00,0xc0,0x00,0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04,
++0xc0,0x05,0xc0,0x06,0xc0,0x07,0x75,0x0d,0x00,0x90,0x01,0xc4,0x74,0x99,0xf0,0x74,
++0x5d,0xa3,0xf0,0x53,0x91,0xdf,0x90,0x01,0x3c,0xe0,0x55,0x30,0xf5,0x34,0xa3,0xe0,
++0x55,0x31,0xf5,0x35,0xa3,0xe0,0x55,0x32,0xf5,0x36,0xa3,0xe0,0x55,0x33,0xf5,0x37,
++0xe5,0x34,0x30,0xe0,0x06,0x90,0x01,0x3c,0x74,0x01,0xf0,0xe5,0x34,0x30,0xe1,0x08,
++0x90,0x01,0x3c,0x74,0x02,0xf0,0xf1,0x57,0xe5,0x34,0x30,0xe2,0x3a,0x90,0x01,0x3c,
++0x74,0x04,0xf0,0x90,0x06,0x92,0xe0,0x30,0xe0,0x25,0x90,0x91,0x66,0xe4,0xf0,0x90,
++0x91,0x2d,0xe0,0x90,0x91,0x67,0xf0,0xe4,0xfb,0xfd,0x7f,0x58,0x7e,0x01,0x12,0x44,
++0x59,0x90,0x01,0x5b,0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x01,0xf0,0x80,0x08,0x90,
++0x91,0x37,0xe4,0xf0,0x12,0x44,0xc2,0xe5,0x34,0x30,0xe3,0x3a,0x90,0x01,0x3c,0x74,
++0x08,0xf0,0x90,0x06,0x92,0xe0,0x30,0xe1,0x25,0x90,0x91,0x66,0xe4,0xf0,0x90,0x91,
++0x2d,0xe0,0x90,0x91,0x67,0xf0,0xe4,0xfb,0xfd,0x7f,0x5c,0x7e,0x01,0x12,0x44,0x59,
++0x90,0x01,0x5f,0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x02,0xf0,0x80,0x08,0x90,0x91,
++0x36,0xe4,0xf0,0x12,0x44,0xc2,0xe5,0x34,0x30,0xe4,0x09,0x90,0x01,0x3c,0x74,0x10,
++0xf0,0x12,0x53,0x86,0xe5,0x34,0x30,0xe5,0x09,0x90,0x01,0x3c,0x74,0x20,0xf0,0x12,
++0x6e,0xb9,0xe5,0x35,0x30,0xe0,0x5a,0x90,0x01,0x3d,0x74,0x01,0xf0,0x90,0x01,0x2f,
++0xe0,0x44,0x7f,0xf0,0x90,0x00,0x83,0xe0,0x54,0x0f,0xf5,0x0d,0xb4,0x01,0x02,0x80,
++0x1c,0xe5,0x0d,0xb4,0x02,0x05,0x90,0x00,0x83,0x80,0x12,0xe5,0x0d,0xb4,0x04,0x05,
++0x90,0x00,0x83,0x80,0x08,0xe5,0x0d,0xb4,0x0c,0x08,0x90,0x00,0x83,0xe0,0xf5,0x6f,
++0x80,0x06,0x90,0x01,0xbe,0xe0,0x04,0xf0,0x90,0x01,0xbb,0xe5,0x6f,0xf0,0xe5,0x6f,
++0x30,0xe0,0x03,0xa3,0x80,0x03,0x90,0x01,0xbd,0xe0,0x04,0xf0,0xf1,0x38,0x12,0x44,
++0xc2,0xe5,0x35,0x30,0xe2,0x06,0x90,0x01,0x3d,0x74,0x04,0xf0,0xe5,0x36,0x30,0xe0,
++0x06,0x90,0x01,0x3e,0x74,0x01,0xf0,0xe5,0x36,0x30,0xe1,0x06,0x90,0x01,0x3e,0x74,
++0x02,0xf0,0x74,0x99,0x04,0x90,0x01,0xc4,0xf0,0x74,0x5d,0xa3,0xf0,0xd0,0x07,0xd0,
++0x06,0xd0,0x05,0xd0,0x04,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,0xd0,
++0x82,0xd0,0x83,0xd0,0xf0,0xd0,0xe0,0x32,0xe5,0x6f,0x30,0xe6,0x19,0xe5,0x6f,0x54,
++0x0f,0xff,0x90,0x91,0x24,0xe0,0xfe,0x4f,0x90,0x01,0x2f,0xf0,0xee,0x64,0x80,0x90,
++0x91,0x24,0xf0,0x53,0x6f,0xbf,0x22,0xe4,0x90,0x91,0x0d,0xf0,0xe5,0x70,0x70,0x02,
++0xe1,0xe1,0x90,0x91,0x3c,0xe0,0x60,0x0d,0xe4,0xf0,0x53,0x71,0xfd,0xe5,0x71,0x54,
++0x07,0x70,0x6e,0x80,0x69,0x90,0x91,0x28,0xe0,0x04,0xf0,0x53,0x71,0xef,0x90,0x91,
++0x3a,0xe0,0x04,0xf0,0x90,0x91,0x0d,0xe0,0xf9,0xff,0x7e,0x00,0x24,0x01,0xfd,0xee,
++0x33,0xfc,0x90,0x91,0x3a,0xe0,0xb5,0x05,0x06,0xe4,0xb5,0x04,0x02,0x80,0x12,0xef,
++0x24,0x02,0xff,0xe4,0x3e,0xfe,0x90,0x91,0x3a,0xe0,0xb5,0x07,0x0a,0xe4,0xb5,0x06,
++0x06,0x90,0x05,0x58,0xe0,0x04,0xf0,0xe9,0xff,0x90,0x91,0x2f,0xe0,0x2f,0xff,0xe4,
++0x33,0xfe,0x90,0x91,0x28,0xe0,0xd3,0x9f,0xee,0x64,0x80,0xf8,0x74,0x80,0x98,0x40,
++0x0d,0xe5,0x6d,0xb4,0x01,0x0b,0xa3,0xe0,0x70,0x07,0xe0,0x04,0xf0,0x22,0x12,0x44,
++0xc2,0x22,0x8f,0x20,0x8c,0x21,0x8d,0x22,0x22,0x8f,0x23,0x8c,0x24,0x8d,0x25,0x22,
++0xe4,0x90,0x91,0x11,0xf0,0xa3,0xf0,0x90,0x02,0x86,0xe0,0x20,0xe1,0x2c,0xc3,0x90,
++0x91,0x12,0xe0,0x94,0x20,0x90,0x91,0x11,0xe0,0x94,0x03,0x40,0x0a,0x90,0x01,0xc6,
++0xe0,0x44,0x20,0xf0,0x7f,0x00,0x22,0x90,0x91,0x11,0xe4,0x75,0xf0,0x01,0x12,0x42,
++0x81,0x7f,0x01,0x7e,0x00,0x12,0x37,0x54,0x80,0xcd,0x7f,0x01,0x22,0x90,0x01,0xcc,
++0xe0,0x54,0x0f,0x90,0x91,0x11,0xf0,0x90,0x91,0x11,0xe0,0xfd,0x70,0x02,0x21,0x6f,
++0x90,0x91,0x9c,0xe0,0xff,0x74,0x01,0x7e,0x00,0xa8,0x07,0x08,0x80,0x05,0xc3,0x33,
++0xce,0x33,0xce,0xd8,0xf9,0xff,0xef,0x5d,0x70,0x02,0x21,0x68,0x90,0x91,0x9c,0xe0,
++0x75,0xf0,0x04,0x90,0x01,0xd0,0x12,0x43,0x15,0xe0,0x90,0x91,0x12,0xf0,0x75,0x63,
++0x01,0x75,0x64,0x91,0x75,0x65,0x12,0x75,0x66,0x01,0x7b,0x01,0x7a,0x91,0x79,0x13,
++0x12,0x46,0x6d,0x90,0x91,0x13,0xe0,0xff,0xc4,0x13,0x13,0x13,0x54,0x01,0x90,0x91,
++0x9c,0x30,0xe0,0x59,0xe0,0x75,0xf0,0x02,0x90,0x00,0x88,0x12,0x43,0x15,0xe0,0x90,
++0x91,0x14,0xf0,0x90,0x91,0x9c,0xe0,0x75,0xf0,0x02,0x90,0x00,0x89,0x12,0x43,0x15,
++0xe0,0x90,0x91,0x15,0xf0,0x90,0x91,0x9c,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd1,0x12,
++0x43,0x15,0xe0,0x90,0x91,0x16,0xf0,0x90,0x91,0x9c,0xe0,0x75,0xf0,0x04,0x90,0x01,
++0xd2,0x12,0x43,0x15,0xe0,0x90,0x91,0x17,0xf0,0x90,0x91,0x9c,0xe0,0x75,0xf0,0x04,
++0x90,0x01,0xd3,0x12,0x43,0x15,0xe0,0x90,0x91,0x18,0xf0,0x80,0x33,0xe0,0x75,0xf0,
++0x04,0x90,0x01,0xd1,0x12,0x43,0x15,0xe0,0x90,0x91,0x14,0xf0,0x90,0x91,0x9c,0xe0,
++0x75,0xf0,0x04,0x90,0x01,0xd2,0x12,0x43,0x15,0xe0,0x90,0x91,0x15,0xf0,0x90,0x91,
++0x9c,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd3,0x12,0x43,0x15,0xe0,0x90,0x91,0x16,0xf0,
++0xef,0x54,0x7f,0xff,0x7b,0x01,0x7a,0x91,0x79,0x14,0x12,0x51,0xf8,0x90,0x91,0x11,
++0xe0,0xff,0x90,0x91,0x9c,0xe0,0xfe,0x74,0x01,0xa8,0x06,0x08,0x80,0x02,0xc3,0x33,
++0xd8,0xfc,0xf4,0x5f,0x90,0x91,0x11,0xf0,0x90,0x91,0x9c,0xe0,0xff,0x74,0x01,0xa8,
++0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0x90,0x01,0xcc,0xf0,0x90,0x91,0x9c,0xe0,
++0x04,0xf0,0xe0,0x54,0x03,0xf0,0x01,0x37,0x90,0x01,0xc6,0xe0,0x44,0x02,0xf0,0x22,
++0xad,0x07,0x74,0x11,0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x01,0xf0,
++0x90,0x04,0x80,0xe0,0x54,0x0f,0xfc,0x74,0x14,0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,
++0x83,0xe0,0x54,0xc0,0x4c,0xfd,0x74,0x14,0x2f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,
++0xed,0xf0,0x22,0xef,0x60,0x0f,0x74,0x21,0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,
++0xe0,0x44,0x10,0xf0,0x22,0x74,0x21,0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,
++0x54,0xef,0xf0,0x22,0xe4,0xf5,0x6d,0xf5,0x71,0xf5,0x70,0x75,0x6f,0x0c,0x75,0x6e,
++0x0c,0x90,0x91,0x3b,0xf0,0x90,0x91,0x37,0xf0,0x90,0x91,0x36,0xf0,0x90,0x91,0x39,
++0x04,0xf0,0x90,0x91,0x27,0xf0,0xe4,0x90,0x91,0x3c,0xf0,0x90,0x91,0x29,0xf0,0x90,
++0x91,0x34,0x74,0x07,0xf0,0xe4,0x90,0x91,0x28,0xf0,0x90,0x91,0x32,0xf0,0xa3,0x74,
++0x03,0xf0,0x90,0x91,0x2f,0x74,0x0a,0xf0,0xa3,0x74,0x05,0xf0,0x90,0x91,0x2d,0x74,
++0x14,0xf0,0x90,0x91,0x35,0x74,0x05,0xf0,0xe4,0x90,0x91,0x2b,0xf0,0x90,0x91,0x25,
++0xf0,0x90,0x91,0x50,0xf0,0x90,0x91,0x31,0xf0,0x90,0x91,0x3a,0xf0,0x90,0x91,0x26,
++0xf0,0x90,0x91,0x38,0xf0,0x90,0x91,0x2e,0xf0,0x90,0x91,0x2c,0xf0,0x22,0xe4,0x90,
++0x91,0x3c,0xf0,0x90,0x91,0x28,0xf0,0xf5,0x71,0x22,0x90,0x06,0x04,0xe0,0x54,0xbf,
++0xf0,0xef,0x60,0x0a,0xe5,0x6d,0xb4,0x01,0x05,0xe4,0xff,0x12,0x47,0xc9,0x53,0x6e,
++0xf0,0x43,0x6e,0x0c,0x22,0x90,0x91,0x9d,0xef,0xf0,0x51,0x7e,0x90,0x91,0x9d,0xe0,
++0x60,0x05,0x90,0x05,0x22,0xe4,0xf0,0x53,0x6e,0xf0,0x43,0x6e,0x04,0x22,0x90,0x00,
++0x11,0xe0,0x44,0x09,0xf0,0x12,0x4a,0xe6,0x90,0x90,0xd8,0x12,0x43,0x09,0x90,0x80,
++0x85,0x12,0x2a,0x7f,0x7f,0x78,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x90,0xdc,0x12,0x43,
++0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x2f,0xd9,0x90,0x90,
++0xe0,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x00,0x7e,0x08,0x12,0x2f,
++0xd9,0x90,0x90,0xe4,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x70,0x7e,
++0x0e,0x12,0x2f,0xd9,0x90,0x80,0x59,0x12,0x2a,0x8b,0x00,0x03,0x2d,0x95,0xe4,0xfd,
++0xff,0x12,0x34,0x81,0x90,0x91,0x51,0xe0,0xb4,0x01,0x11,0x90,0x80,0x59,0x12,0x2a,
++0x8b,0x00,0x03,0x2d,0x95,0xe4,0xfd,0x7f,0x01,0x12,0x34,0x81,0x22,0x8f,0x77,0xe4,
++0x90,0x91,0x96,0xf0,0xa3,0xf0,0x90,0x01,0x09,0xe0,0x7f,0x00,0x30,0xe7,0x02,0x7f,
++0x01,0xef,0x65,0x77,0x60,0x3e,0xc3,0x90,0x91,0x97,0xe0,0x94,0x88,0x90,0x91,0x96,
++0xe0,0x94,0x13,0x40,0x08,0x90,0x01,0xc6,0xe0,0x44,0x80,0xf0,0x22,0x90,0x91,0x96,
++0xe4,0x75,0xf0,0x01,0x12,0x42,0x81,0x7f,0x14,0x7e,0x00,0x12,0x37,0x54,0xd3,0x90,
++0x91,0x97,0xe0,0x94,0x32,0x90,0x91,0x96,0xe0,0x94,0x00,0x40,0xb9,0x90,0x01,0xc7,
++0xe0,0x30,0xe0,0xb2,0x22,0x22,0x53,0x6e,0xf0,0x43,0x6e,0x01,0x71,0x55,0x71,0x67,
++0x53,0x6e,0xf0,0x43,0x6e,0x02,0x22,0x22,0x8f,0x78,0x12,0x47,0xe6,0xef,0x64,0x01,
++0x70,0x2e,0x90,0x91,0x44,0x12,0x48,0x1e,0xe5,0x78,0x60,0x10,0x74,0x21,0x2f,0xf5,
++0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x10,0xf0,0x80,0x0e,0x74,0x21,0x2f,0xf5,
++0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xef,0xf0,0x90,0x04,0x1f,0x74,0x20,0xf0,
++0x22,0xe4,0xfb,0x90,0x91,0x7c,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe5,0x70,0x60,
++0x5f,0xe5,0x6d,0x64,0x01,0x70,0x59,0x0b,0x90,0x91,0x27,0xf0,0x04,0x60,0x51,0x43,
++0x71,0x10,0xe4,0x90,0x91,0x66,0xf0,0x90,0x91,0x3a,0xe0,0x75,0xf0,0x05,0xa4,0xff,
++0x90,0x91,0x34,0xe0,0x2f,0x90,0x91,0x67,0xf0,0xe4,0x1b,0x12,0x44,0x54,0x90,0x01,
++0x57,0x74,0x05,0xf0,0xe5,0x6e,0x54,0x0f,0xc3,0x94,0x04,0x50,0x07,0x7d,0x01,0x7f,
++0x04,0x12,0x47,0x27,0x90,0x91,0x2e,0xe0,0x60,0x11,0x90,0x91,0x2c,0xe0,0x90,0x07,
++0x78,0x60,0x05,0x74,0x0d,0xf0,0x80,0x03,0x74,0x09,0xf0,0x90,0x05,0x22,0xe4,0xf0,
++0x22,0x90,0x91,0x32,0xe0,0xa3,0xe0,0x90,0x05,0x58,0xf0,0x22,0xd3,0x10,0xaf,0x01,
++0xc3,0xc0,0xd0,0x90,0x91,0x84,0xee,0xf0,0xa3,0xef,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,
++0x90,0x91,0x84,0xe0,0xfe,0xa3,0xe0,0xf5,0x82,0x8e,0x83,0xe0,0x60,0x2d,0xc3,0x90,
++0x91,0x87,0xe0,0x94,0xe8,0x90,0x91,0x86,0xe0,0x94,0x03,0x40,0x0b,0x90,0x01,0xc6,
++0xe0,0x44,0x10,0xf0,0x7f,0x00,0x80,0x15,0x90,0x91,0x86,0xe4,0x75,0xf0,0x01,0x12,
++0x42,0x81,0x7f,0x0a,0x7e,0x00,0x12,0x37,0x54,0x80,0xc5,0x7f,0x01,0xd0,0xd0,0x92,
++0xaf,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,0x1c,0x12,0x43,0x41,0x90,
++0x91,0x1f,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0x90,0x91,0x1c,0x12,0x43,0x21,0x90,
++0x00,0x01,0x12,0x42,0x20,0x90,0x91,0x3b,0xf0,0x90,0x00,0x03,0x12,0x42,0x20,0x90,
++0x91,0x25,0xf0,0x90,0x00,0x04,0x12,0x42,0x20,0xff,0x54,0x01,0x90,0x91,0x26,0xf0,
++0xef,0xc3,0x13,0x54,0x01,0x90,0x91,0x2e,0xf0,0x90,0x00,0x04,0x12,0x42,0x20,0xff,
++0x13,0x13,0x54,0x01,0x90,0x91,0x2c,0xf0,0x90,0x91,0x2e,0xe0,0x90,0x91,0x1f,0x70,
++0x26,0x12,0x2a,0x8b,0x00,0x00,0x02,0x10,0x90,0x91,0x1f,0x12,0x43,0x09,0x90,0x80,
++0x85,0x12,0x2a,0x7f,0x7f,0x60,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x91,0x1f,0x12,0x2a,
++0x8b,0x00,0x00,0x03,0x10,0x80,0x24,0x12,0x2a,0x8b,0x00,0x00,0x01,0x10,0x90,0x91,
++0x1f,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x60,0x7e,0x08,0x12,0x2f,
++0xd9,0x90,0x91,0x1f,0x12,0x2a,0x8b,0x00,0x00,0x03,0x00,0x90,0x91,0x1f,0x12,0x43,
++0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x70,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x91,
++0x26,0xe0,0x70,0x3d,0x90,0x91,0x38,0x74,0x01,0xf0,0x7f,0x00,0x7e,0x08,0x12,0x27,
++0xde,0x90,0x91,0x1f,0x12,0x2a,0x7f,0x90,0x91,0x1f,0x12,0x43,0x09,0xec,0x44,0x02,
++0xfc,0x90,0x91,0x1f,0x12,0x2a,0x7f,0x90,0x91,0x1f,0x12,0x43,0x09,0x90,0x80,0x85,
++0x12,0x2a,0x7f,0x7f,0x00,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x02,0x86,0xe0,0x54,0xfb,
++0xf0,0x90,0x91,0x1c,0x12,0x43,0x21,0x12,0x49,0x7f,0x90,0x01,0xe5,0xe5,0x70,0xf0,
++0x90,0x91,0x3b,0xe0,0x90,0x01,0xe6,0xf0,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x00,0x02,
++0x12,0x42,0x20,0xff,0x30,0xe0,0x25,0x12,0x29,0xd9,0x90,0x91,0x2f,0xf0,0x90,0x00,
++0x01,0x12,0x42,0x20,0x90,0x91,0x30,0xf0,0xef,0xc3,0x13,0x54,0x7f,0x90,0x91,0x2d,
++0xf0,0x90,0x00,0x03,0x12,0x42,0x20,0x90,0x91,0x35,0xf0,0x22,0x90,0x91,0x2f,0x74,
++0x0a,0xf0,0x90,0x91,0x30,0x74,0x05,0xf0,0x90,0x91,0x2d,0x74,0x14,0xf0,0x90,0x91,
++0x35,0x74,0x05,0xf0,0x22,0x12,0x29,0xd9,0x30,0xe0,0x19,0xc3,0x13,0x54,0x7f,0x90,
++0x91,0x34,0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0xff,0x90,0x91,0x32,0xe4,0xf0,0xa3,
++0xef,0xf0,0x80,0x0f,0x90,0x91,0x34,0x74,0x07,0xf0,0x90,0x91,0x32,0xe4,0xf0,0xa3,
++0x74,0x03,0xf0,0x90,0x91,0x32,0xe0,0xa3,0xe0,0x90,0x05,0x58,0xf0,0x22,0x90,0x02,
++0x09,0xe0,0xfd,0x12,0x29,0xd9,0xfe,0xaf,0x05,0xed,0x2e,0x90,0x91,0x41,0xf0,0x90,
++0x00,0x01,0x12,0x42,0x20,0xff,0xed,0x2f,0x90,0x91,0x42,0xf0,0x90,0x00,0x02,0x12,
++0x42,0x20,0xff,0xed,0x2f,0x90,0x91,0x43,0xf0,0x90,0x00,0x03,0x12,0x42,0x20,0xff,
++0xed,0x2f,0x90,0x91,0x44,0xf0,0x90,0x00,0x04,0x12,0x42,0x20,0xff,0xae,0x05,0xed,
++0x2f,0x90,0x91,0x45,0xf0,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,0x47,
++0xe0,0x90,0x91,0x1d,0xf0,0x90,0x91,0x48,0xe0,0xf5,0x19,0xa3,0xe0,0xf5,0x1a,0xe4,
++0xf5,0x16,0x74,0x4a,0x25,0x16,0xf5,0x82,0xe4,0x34,0x91,0xf5,0x83,0xe0,0xff,0x74,
++0x1b,0x25,0x16,0xf8,0xa6,0x07,0x05,0x16,0xe5,0x16,0xb4,0x04,0xe5,0x90,0x91,0x1d,
++0xe0,0x12,0x43,0x4a,0x66,0xb3,0x00,0x67,0xdc,0x01,0x66,0xba,0x02,0x66,0xba,0x03,
++0x66,0xba,0x04,0x67,0xdc,0x05,0x67,0xac,0x80,0x67,0xc2,0x81,0x67,0xdc,0x82,0x00,
++0x00,0x67,0xd8,0xaf,0x1e,0x12,0x73,0xea,0xe1,0xdc,0x90,0x91,0x1d,0xe0,0xff,0xb4,
++0x02,0x08,0x90,0x91,0x1c,0x74,0x01,0xf0,0x80,0x0f,0xef,0x90,0x91,0x1c,0xb4,0x03,
++0x05,0x74,0x02,0xf0,0x80,0x03,0x74,0x04,0xf0,0xc3,0xe5,0x19,0x94,0x08,0x50,0x49,
++0xe4,0xf5,0x16,0x90,0x91,0x1c,0xe0,0xff,0xe5,0x16,0xc3,0x9f,0x40,0x02,0xe1,0xdc,
++0xc3,0xe5,0x19,0x94,0x01,0x50,0x14,0xe5,0x16,0x25,0x1a,0xff,0xc3,0x74,0x03,0x95,
++0x16,0x24,0x1b,0xf8,0xe6,0xfd,0x12,0x4b,0xee,0x80,0x1a,0xc3,0x74,0x03,0x95,0x16,
++0x24,0x1b,0xf8,0xe6,0xff,0xe5,0x16,0x7c,0x00,0x25,0x1a,0xfd,0xec,0x35,0x19,0x8d,
++0x82,0xf5,0x83,0xef,0xf0,0x05,0x16,0x80,0xba,0xc3,0xe5,0x19,0x94,0x10,0x40,0x02,
++0xe1,0xdc,0x90,0x91,0x1d,0xe0,0x64,0x04,0x60,0x02,0xe1,0xdc,0xaf,0x1c,0xfc,0xfd,
++0xfe,0x78,0x10,0x12,0x2a,0x6c,0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0xaf,0x1b,
++0xe4,0xfc,0xfd,0xfe,0x78,0x18,0x12,0x2a,0x6c,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,
++0x00,0x12,0x42,0xfc,0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0xaf,0x1d,0xe4,0xfc,
++0xfd,0xfe,0x78,0x08,0x12,0x2a,0x6c,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0x12,
++0x42,0xfc,0xa8,0x04,0xa9,0x05,0xaa,0x06,0xab,0x07,0xaf,0x1e,0xe4,0xfc,0xfd,0xfe,
++0x12,0x42,0xfc,0xa3,0x12,0x2a,0x7f,0x90,0x91,0x1e,0x12,0x43,0x09,0x90,0x80,0x85,
++0x12,0x2a,0x7f,0xaf,0x1a,0xae,0x19,0x12,0x2f,0xd9,0x80,0x30,0xe5,0x1d,0x7f,0x00,
++0xfe,0xef,0x25,0x1e,0xf5,0x18,0xe4,0x3e,0xf5,0x17,0xaf,0x18,0xfe,0x12,0x37,0x54,
++0x80,0x1a,0xe5,0x1d,0x7f,0x00,0xfe,0xef,0x25,0x1e,0xf5,0x18,0xe4,0x3e,0xf5,0x17,
++0xaf,0x18,0xfe,0x12,0x36,0xcb,0x80,0x04,0x7f,0x00,0x80,0x02,0x7f,0x01,0xd0,0xd0,
++0x92,0xaf,0x22,0x22,0x8e,0x0e,0x8f,0x0f,0x8b,0x10,0x8a,0x11,0x89,0x12,0xe4,0x90,
++0x91,0x11,0xf0,0xef,0x90,0x00,0x31,0xf0,0x12,0x4a,0xe6,0xe5,0x0e,0x54,0x03,0xff,
++0x90,0x00,0x32,0xe0,0x54,0xfc,0x4f,0xf0,0x12,0x4a,0xe6,0x90,0x00,0x33,0xe0,0x54,
++0x7f,0xf0,0x12,0x4a,0xe6,0x90,0x00,0x33,0xe0,0x20,0xe7,0x0e,0x90,0x91,0x11,0xe0,
++0xc3,0x94,0x64,0x50,0x05,0xe0,0x04,0xf0,0x80,0xeb,0x90,0x91,0x11,0xe0,0xc3,0x94,
++0x64,0x50,0x10,0x90,0x00,0x30,0xe0,0xab,0x10,0xaa,0x11,0xa9,0x12,0x12,0x42,0x4d,
++0x7f,0x01,0x22,0x7f,0x00,0x22,0xe4,0x90,0x91,0x98,0xf0,0xa3,0xf0,0x90,0x05,0xf8,
++0xe0,0x70,0x0f,0xa3,0xe0,0x70,0x0b,0xa3,0xe0,0x70,0x07,0xa3,0xe0,0x70,0x03,0x7f,
++0x01,0x22,0xd3,0x90,0x91,0x99,0xe0,0x94,0xe8,0x90,0x91,0x98,0xe0,0x94,0x03,0x40,
++0x03,0x7f,0x00,0x22,0x7f,0x32,0x7e,0x00,0x12,0x37,0x54,0x90,0x91,0x98,0xe4,0x75,
++0xf0,0x01,0x12,0x42,0x81,0x80,0xc6,0xef,0x70,0x02,0x41,0x3d,0x90,0x90,0xe8,0xe0,
++0x60,0x02,0xc1,0x08,0x90,0x90,0xd4,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,
++0x7f,0x8c,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x90,0x80,0x12,0x43,0x09,0x90,0x80,0x85,
++0x12,0x2a,0x7f,0x7f,0x44,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x90,0x84,0x12,0x43,0x09,
++0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x5c,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x90,0x88,
++0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x6c,0x7e,0x0e,0x12,0x2f,0xd9,
++0x90,0x90,0x8c,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x70,0x7e,0x0e,
++0x12,0x2f,0xd9,0x90,0x90,0x90,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,
++0x74,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0x94,0x12,0x43,0x09,0x90,0x80,0x85,0x12,
++0x2a,0x7f,0x7f,0x78,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0x98,0x12,0x43,0x09,0x90,
++0x80,0x85,0x12,0x2a,0x7f,0x7f,0x7c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0x9c,0x12,
++0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x0e,0x12,0x2f,0xd9,0x90,
++0x90,0xa0,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x84,0x7e,0x0e,0x12,
++0x2f,0xd9,0x90,0x90,0xa4,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x88,
++0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0xa8,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,
++0x7f,0x7f,0x8c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0xac,0x12,0x43,0x09,0x90,0x80,
++0x85,0x12,0x2a,0x7f,0x7f,0xd0,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0xb0,0x12,0x43,
++0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0xd4,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,
++0xb4,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0xd8,0x7e,0x0e,0x12,0x2f,
++0xd9,0x90,0x90,0xb8,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0xdc,0x7e,
++0x0e,0x12,0x2f,0xd9,0x90,0x90,0xbc,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,
++0x7f,0xe0,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0xc0,0x12,0x43,0x09,0x90,0x80,0x85,
++0x12,0x2a,0x7f,0x7f,0xec,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0xc4,0x12,0x43,0x09,
++0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x2f,0xd9,0x90,0x90,0xc8,
++0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0d,0x12,0x2f,0xd9,
++0x90,0x90,0xcc,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x0c,0x7e,0x09,
++0x12,0x2f,0xd9,0x90,0x90,0xd0,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,
++0x04,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x90,0xe8,0x74,0x01,0xf0,0x22,0x90,0x90,0xe8,
++0xe0,0x64,0x01,0x60,0x02,0xc1,0x08,0x7f,0x8c,0x7e,0x08,0x12,0x27,0xde,0x90,0x90,
++0xd4,0x12,0x2a,0x7f,0x7f,0x44,0x7e,0x08,0x12,0x27,0xde,0x90,0x90,0x80,0x12,0x2a,
++0x7f,0x7f,0x5c,0x7e,0x08,0x12,0x27,0xde,0x90,0x90,0x84,0x12,0x2a,0x7f,0x7f,0x6c,
++0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0x88,0x12,0x2a,0x7f,0x7f,0x70,0x7e,0x0e,0x12,
++0x27,0xde,0x90,0x90,0x8c,0x12,0x2a,0x7f,0x7f,0x74,0x7e,0x0e,0x12,0x27,0xde,0x90,
++0x90,0x90,0x12,0x2a,0x7f,0x7f,0x78,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0x94,0x12,
++0x2a,0x7f,0x7f,0x7c,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0x98,0x12,0x2a,0x7f,0x7f,
++0x80,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0x9c,0x12,0x2a,0x7f,0x7f,0x84,0x7e,0x0e,
++0x12,0x27,0xde,0x90,0x90,0xa0,0x12,0x2a,0x7f,0x7f,0x88,0x7e,0x0e,0x12,0x27,0xde,
++0x90,0x90,0xa4,0x12,0x2a,0x7f,0x7f,0x8c,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0xa8,
++0x12,0x2a,0x7f,0x7f,0xd0,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0xac,0x12,0x2a,0x7f,
++0x7f,0xd4,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0xb0,0x12,0x2a,0x7f,0x7f,0xd8,0x7e,
++0x0e,0x12,0x27,0xde,0x90,0x90,0xb4,0x12,0x2a,0x7f,0x7f,0xdc,0x7e,0x0e,0x12,0x27,
++0xde,0x90,0x90,0xb8,0x12,0x2a,0x7f,0x7f,0xe0,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,
++0xbc,0x12,0x2a,0x7f,0x7f,0xec,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0xc0,0x12,0x2a,
++0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x27,0xde,0x90,0x90,0xc4,0x12,0x2a,0x7f,0x7f,0x04,
++0x7e,0x0d,0x12,0x27,0xde,0x90,0x90,0xc8,0x12,0x2a,0x7f,0x7f,0x0c,0x7e,0x09,0x12,
++0x27,0xde,0x90,0x90,0xcc,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x08,0x12,0x27,0xde,0x90,
++0x90,0xd0,0x12,0x2a,0x7f,0x7f,0x8c,0x7e,0x08,0x12,0x27,0xde,0x90,0x91,0x88,0x12,
++0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xed,0x44,0xc0,0xfd,0xec,0x90,0x91,0x88,
++0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,
++0x8c,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x01,0x00,0x00,
++0x7f,0x44,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0xdb,0x25,
++0xa4,0x7f,0x5c,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,
++0x25,0xa4,0x7f,0x6c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,
++0xdb,0x25,0xa4,0x7f,0x70,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,
++0x04,0x1b,0x25,0xa4,0x7f,0x74,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,
++0x8b,0x04,0x1b,0x25,0xa4,0x7f,0x78,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,
++0x2a,0x8b,0x04,0x1b,0x25,0xa4,0x7f,0x7c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,
++0x12,0x2a,0x8b,0x04,0x1b,0x25,0xa4,0x7f,0x80,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,
++0x85,0x12,0x2a,0x8b,0x63,0xdb,0x25,0xa4,0x7f,0x84,0x7e,0x0e,0x12,0x2f,0xd9,0x90,
++0x80,0x85,0x12,0x2a,0x8b,0x04,0x1b,0x25,0xa4,0x7f,0x88,0x7e,0x0e,0x12,0x2f,0xd9,
++0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0x8c,0x7e,0x0e,0x12,0x2f,
++0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0xd0,0x7e,0x0e,0x12,
++0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0xd4,0x7e,0x0e,
++0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0xd8,0x7e,
++0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x1b,0x25,0xa4,0x7f,0xdc,
++0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x1b,0x25,0xa4,0x7f,
++0xe0,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x24,0xdb,0x25,0xa4,
++0x7f,0xec,0x7e,0x0e,0x12,0x2f,0xd9,0x7f,0x04,0x7e,0x0c,0x12,0x27,0xde,0x90,0x91,
++0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xe4,0xff,0xec,0x90,0x91,0x88,
++0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xef,0x44,0x11,0xff,0xec,0x90,0x91,
++0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,
++0x7f,0x04,0x7e,0x0c,0x12,0x2f,0xd9,0x7f,0x04,0x7e,0x0d,0x12,0x27,0xde,0x90,0x91,
++0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xef,0x54,0xf0,0xff,0xec,0x90,
++0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xef,0x44,0x01,0xff,0xec,
++0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x85,0x12,
++0x2a,0x7f,0x7f,0x04,0x7e,0x0d,0x12,0x2f,0xd9,0x7f,0x0c,0x7e,0x09,0x12,0x27,0xde,
++0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xe4,0xff,0xec,0x90,
++0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xef,0x44,0x11,0xff,0xec,
++0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x85,0x12,
++0x2a,0x7f,0x7f,0x0c,0x7e,0x09,0x12,0x2f,0xd9,0x7f,0x0c,0x7e,0x09,0x12,0x27,0xde,
++0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xed,0x54,0x0f,0xfd,
++0xec,0x54,0xf0,0xfc,0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,
++0xed,0x44,0x10,0xfd,0xec,0x44,0x01,0xfc,0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,
++0x88,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x0c,0x7e,0x09,0x12,0x2f,
++0xd9,0x7f,0x04,0x7e,0x08,0x12,0x27,0xde,0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,
++0x88,0x12,0x43,0x09,0xef,0x54,0xf0,0xff,0xec,0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,
++0x91,0x88,0x12,0x43,0x09,0xef,0x44,0x01,0xff,0xec,0x90,0x91,0x88,0x12,0x2a,0x7f,
++0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x08,
++0x12,0x2f,0xd9,0xe4,0x90,0x90,0xe8,0xf0,0x22,0xe4,0xfd,0x7f,0x45,0x12,0x4b,0xee,
++0x90,0x04,0xfd,0xe4,0xf0,0xa3,0xf0,0x90,0x90,0xf7,0xf0,0x90,0x90,0xfd,0xf0,0x90,
++0x91,0x00,0xf0,0x90,0x90,0xfe,0xf0,0x90,0x91,0x01,0xf0,0x90,0x90,0xff,0xf0,0x90,
++0x91,0x02,0xf0,0x90,0x90,0xe9,0x04,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,
++0x90,0xee,0xf0,0x90,0x90,0xf3,0xf0,0x90,0x90,0xf5,0xf0,0x90,0x91,0x07,0xf0,0x90,
++0x90,0xf8,0xf0,0x90,0x90,0xf4,0xf0,0x90,0x90,0xed,0xf0,0x90,0x00,0x51,0xe0,0x44,
++0xc0,0xfd,0x7f,0x51,0x02,0x4b,0xee,0x90,0x05,0x60,0xe0,0x90,0x91,0x03,0xf0,0x90,
++0x05,0x61,0xe0,0x90,0x91,0x04,0xf0,0x90,0x05,0x62,0xe0,0x90,0x91,0x05,0xf0,0x90,
++0x05,0x63,0xe0,0x90,0x91,0x06,0xf0,0xc3,0x74,0xff,0x9f,0xfe,0x90,0x91,0x04,0xe0,
++0xd3,0x9e,0x40,0x1e,0xe0,0x2f,0xf0,0xa3,0xe0,0xb4,0xff,0x0f,0xe4,0xf0,0xa3,0xe0,
++0xb4,0xff,0x03,0xe4,0xf0,0x22,0x90,0x91,0x06,0x80,0x03,0x90,0x91,0x05,0xe0,0x04,
++0xf0,0x22,0x90,0x91,0x04,0xe0,0x2f,0xf0,0x22,0x90,0x90,0xf5,0xe0,0x64,0x01,0x60,
++0x02,0xe1,0x6e,0x90,0x00,0x46,0xe0,0x44,0x01,0xfd,0x7f,0x46,0x12,0x4b,0xee,0x90,
++0x91,0x07,0xe0,0x70,0x32,0x90,0x90,0xed,0xe0,0x60,0x15,0x90,0x90,0xf9,0x12,0x43,
++0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9,0x80,0x06,
++0x90,0x05,0x22,0x74,0x7f,0xf0,0x90,0x90,0xf4,0xe0,0xff,0xd1,0x67,0x90,0x91,0x07,
++0x74,0x01,0x12,0x4b,0xe4,0x80,0x40,0x90,0x91,0x07,0xe0,0x64,0x01,0x70,0x38,0x90,
++0x90,0xf8,0xe0,0xff,0xd1,0x67,0xe4,0x90,0x91,0x07,0xf0,0x90,0x00,0x45,0xe0,0x44,
++0x01,0xfd,0x7f,0x45,0x12,0x4b,0xee,0x90,0x90,0xed,0xe0,0x60,0x15,0x90,0x90,0xef,
++0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9,
++0x80,0x05,0x90,0x05,0x22,0xe4,0xf0,0x90,0x05,0x87,0xe0,0x64,0x80,0xf0,0x90,0x91,
++0x03,0xe0,0x90,0x05,0x84,0xf0,0x90,0x91,0x04,0xe0,0x90,0x05,0x85,0xf0,0x90,0x91,
++0x05,0xe0,0x90,0x05,0x86,0xf0,0x90,0x91,0x06,0xe0,0x90,0x05,0x87,0xf0,0x22,0x90,
++0x90,0xee,0xe0,0xc3,0x94,0x14,0x50,0x06,0xe0,0x04,0xf0,0x02,0x70,0x29,0x90,0x90,
++0xee,0xe0,0x64,0x14,0x60,0x03,0x02,0x70,0x29,0x90,0x90,0xfd,0xe0,0x70,0x25,0x90,
++0x91,0x00,0xe0,0x70,0x1f,0x90,0x90,0xfe,0xe0,0x70,0x19,0x90,0x91,0x01,0xe0,0x70,
++0x13,0x90,0x90,0xff,0xe0,0x70,0x0d,0x90,0x91,0x02,0xe0,0x70,0x07,0x90,0x04,0xfd,
++0xe0,0x54,0xfe,0xf0,0x90,0x90,0xfd,0xe0,0x90,0x04,0x44,0xf0,0x90,0x90,0xfe,0xe0,
++0x90,0x04,0x45,0xf0,0x90,0x90,0xff,0xe0,0x90,0x04,0x46,0xf0,0xa3,0xe4,0xf0,0x90,
++0x91,0x00,0xe0,0x90,0x04,0x48,0xf0,0x90,0x91,0x01,0xe0,0x90,0x04,0x49,0xf0,0x90,
++0x91,0x02,0xe0,0x90,0x04,0x4a,0xf0,0xa3,0xe4,0xf0,0x90,0x90,0xe9,0xe0,0x90,0x04,
++0x4c,0xf0,0x90,0x90,0xea,0xe0,0x90,0x04,0x4d,0xf0,0x90,0x90,0xeb,0xe0,0x90,0x04,
++0x4e,0xf0,0x90,0x90,0xec,0xe0,0x90,0x04,0x4f,0xf0,0xe4,0x90,0x90,0xee,0xf0,0x90,
++0x90,0xe9,0x04,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x90,0xfd,0xf0,0xa3,
++0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x05,0x60,0xe0,0x90,0x91,0x8c,
++0xf0,0x90,0x05,0x61,0xe0,0x90,0x91,0x8d,0xf0,0x90,0x05,0x62,0xe0,0x90,0x91,0x8e,
++0xf0,0x90,0x05,0x63,0xe0,0x90,0x91,0x8f,0xf0,0x90,0x91,0x06,0xe0,0xff,0x90,0x91,
++0x8f,0xe0,0xfe,0xd3,0x9f,0x50,0x0b,0x90,0x91,0x06,0xe0,0xc3,0x9e,0xd3,0x94,0x01,
++0x40,0x11,0x90,0x90,0xf4,0xe0,0xb4,0x01,0x02,0x80,0x03,0x90,0x90,0xf8,0xe0,0xff,
++0x12,0x6e,0x67,0x22,0x90,0x91,0x07,0xe0,0x64,0x01,0x60,0x08,0x90,0x90,0xf5,0xe0,
++0x60,0x02,0x21,0x4b,0x90,0x90,0xe9,0xe0,0xc3,0x94,0xff,0x50,0x05,0xe0,0x04,0xf0,
++0x80,0x3b,0x90,0x90,0xea,0xe0,0xc3,0x94,0xff,0x50,0x06,0xe0,0x04,0xf0,0xe4,0x80,
++0x28,0x90,0x90,0xeb,0xe0,0xc3,0x94,0xff,0x50,0x0a,0xe0,0x04,0xf0,0xe4,0x90,0x90,
++0xea,0xf0,0x80,0x15,0x90,0x90,0xec,0xe0,0xc3,0x94,0xff,0x50,0x10,0xe0,0x04,0xf0,
++0xe4,0x90,0x90,0xeb,0xf0,0x90,0x90,0xea,0xf0,0x90,0x90,0xe9,0xf0,0x90,0x00,0x44,
++0xe0,0x54,0x0c,0x60,0x76,0xe0,0x30,0xe2,0x32,0x90,0x90,0xfd,0xe0,0xc3,0x94,0xff,
++0x50,0x05,0xe0,0x04,0xf0,0x80,0x24,0x90,0x90,0xfe,0xe0,0xc3,0x94,0xff,0x50,0x06,
++0xe0,0x04,0xf0,0xe4,0x80,0x11,0x90,0x90,0xff,0xe0,0xc3,0x94,0xff,0x50,0x0c,0xe0,
++0x04,0xf0,0xe4,0x90,0x90,0xfe,0xf0,0x90,0x90,0xfd,0xf0,0x90,0x00,0x44,0xe0,0x30,
++0xe3,0x32,0x90,0x91,0x00,0xe0,0xc3,0x94,0xff,0x50,0x05,0xe0,0x04,0xf0,0x80,0x24,
++0x90,0x91,0x01,0xe0,0xc3,0x94,0xff,0x50,0x06,0xe0,0x04,0xf0,0xe4,0x80,0x11,0x90,
++0x91,0x02,0xe0,0xc3,0x94,0xff,0x50,0x0c,0xe0,0x04,0xf0,0xe4,0x90,0x91,0x01,0xf0,
++0x90,0x91,0x00,0xf0,0x90,0x04,0xfd,0xe0,0x44,0x01,0xf0,0x22,0x90,0x06,0x90,0xe0,
++0x44,0x01,0xf0,0x90,0x91,0x61,0xe0,0x30,0xe0,0x3c,0x90,0x91,0x5f,0xe0,0xff,0x90,
++0x91,0x5e,0xe0,0xfe,0xc4,0x13,0x54,0x01,0xfd,0x12,0x4a,0xf6,0x90,0x91,0x60,0xe0,
++0x75,0xf0,0x20,0xa4,0xff,0xae,0xf0,0x12,0x37,0x54,0x90,0x91,0x5e,0xe0,0xc4,0x13,
++0x54,0x07,0x30,0xe0,0x07,0xa3,0xe0,0xff,0xe4,0xfd,0x80,0x07,0x90,0x91,0x5f,0xe0,
++0xff,0x7d,0x01,0x12,0x4a,0xf6,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0xe4,0x90,
++0x91,0x19,0xf0,0xa3,0x74,0x08,0xf0,0xa3,0xf0,0xe4,0xa3,0xf0,0x90,0x01,0x1f,0xe0,
++0xfe,0x90,0x01,0x1e,0xe0,0x7c,0x00,0x24,0x00,0xff,0xec,0x3e,0x90,0x91,0x11,0xf0,
++0xa3,0xef,0xf0,0x90,0x02,0x87,0xe0,0x90,0x91,0x18,0xf0,0x90,0x91,0x56,0xe0,0x20,
++0xe0,0x02,0x61,0xc4,0xe4,0x90,0x91,0x17,0xf0,0x90,0x91,0x18,0xe0,0xff,0x90,0x91,
++0x17,0xe0,0xc3,0x9f,0x40,0x02,0x61,0xc4,0x90,0x91,0x11,0xe0,0xfc,0xa3,0xe0,0xfd,
++0xec,0xff,0x90,0xfd,0x11,0xf0,0x90,0x91,0x1c,0xef,0xf0,0x74,0x02,0x2d,0xf5,0x82,
++0xe4,0x34,0xfb,0xf5,0x83,0xe0,0x54,0x0f,0xfc,0x33,0x33,0x33,0x54,0xf8,0xff,0xed,
++0x24,0x18,0x2f,0x90,0x91,0x15,0xf0,0xe0,0x24,0x00,0xf5,0x82,0xe4,0x34,0xfb,0xf5,
++0x83,0xe0,0x54,0xfc,0x90,0x91,0x16,0xf0,0x74,0x01,0x2d,0xf5,0x82,0xe4,0x34,0xfb,
++0xf5,0x83,0xe0,0xfe,0x74,0x00,0x2d,0xf5,0x82,0xe4,0x34,0xfb,0xf5,0x83,0xe0,0x7a,
++0x00,0x24,0x00,0xff,0xea,0x3e,0x54,0x3f,0xab,0x07,0xfa,0x90,0x91,0x13,0xf0,0xa3,
++0xeb,0xf0,0xaf,0x04,0xef,0x75,0xf0,0x08,0xa4,0x24,0x18,0xff,0xe4,0x35,0xf0,0xfe,
++0xef,0x2b,0xfb,0xee,0x3a,0xfa,0x90,0x91,0x5a,0xe0,0xfe,0xa3,0xe0,0xff,0xad,0x03,
++0xac,0x02,0x12,0x45,0x09,0xaa,0x06,0xab,0x07,0x90,0x91,0x15,0xe0,0x24,0x00,0xf5,
++0x82,0xe4,0x34,0xfb,0xf5,0x83,0xe0,0x30,0xe7,0x08,0x90,0x91,0x19,0x74,0x02,0xf0,
++0x80,0x05,0xe4,0x90,0x91,0x19,0xf0,0xaf,0x03,0x90,0x91,0x11,0xea,0x8f,0xf0,0x12,
++0x42,0x81,0x90,0x91,0x5c,0xe0,0xfe,0xa3,0xe0,0xff,0x90,0x91,0x11,0xe0,0xfc,0xa3,
++0xe0,0xfd,0xd3,0x9f,0xec,0x9e,0x40,0x1b,0x90,0x91,0x5d,0xe0,0x24,0x01,0xff,0x90,
++0x91,0x5c,0xe0,0x34,0x00,0xfe,0xc3,0xed,0x9f,0xff,0xec,0x9e,0x90,0x91,0x11,0xf0,
++0xa3,0xef,0xf0,0x90,0x91,0x16,0xe0,0xff,0x24,0x40,0x60,0x04,0x24,0x20,0x70,0x27,
++0x90,0x91,0x5e,0xe0,0xfe,0xc4,0x13,0x13,0x13,0x54,0x01,0x20,0xe0,0x02,0x61,0x9c,
++0xef,0x90,0x00,0x81,0xb4,0xa0,0x05,0xe0,0x44,0x04,0x80,0x03,0xe0,0x44,0x08,0xfd,
++0x7f,0x81,0x12,0x4b,0xee,0x61,0x95,0x90,0x91,0x5e,0xe0,0xc4,0x13,0x13,0x54,0x03,
++0x20,0xe0,0x02,0x61,0x9c,0x90,0x91,0x15,0xe0,0xff,0x24,0x00,0xf5,0x82,0xe4,0x34,
++0xfb,0xf5,0x83,0xe0,0x54,0x0c,0x64,0x08,0x70,0x72,0x90,0x91,0x19,0xe0,0xfe,0xef,
++0x2e,0xff,0xa3,0xe0,0x2f,0xff,0x24,0x1e,0xf5,0x82,0xe4,0x34,0xfb,0xf5,0x83,0xe0,
++0x64,0x88,0x70,0x58,0x74,0x1f,0x2f,0xf5,0x82,0xe4,0x34,0xfb,0xf5,0x83,0xe0,0x64,
++0x8e,0x70,0x49,0x90,0x91,0x19,0xe0,0xff,0x90,0x91,0x15,0xe0,0x2f,0xff,0x90,0x91,
++0x1a,0xe0,0x2f,0xff,0xa3,0xe0,0x2f,0xff,0x24,0x19,0xf5,0x82,0xe4,0x34,0xfb,0xf5,
++0x83,0xe0,0x64,0x03,0x70,0x26,0x74,0x1e,0x2f,0xf5,0x82,0xe4,0x34,0xfb,0xf5,0x83,
++0xe0,0x90,0x00,0x81,0x30,0xe3,0x05,0xe0,0x44,0x01,0x80,0x03,0xe0,0x44,0x02,0xfd,
++0x7f,0x81,0x12,0x4b,0xee,0x90,0x91,0x56,0xe0,0x44,0x80,0xf0,0x90,0x91,0x56,0xe0,
++0xff,0xc4,0x13,0x13,0x13,0x54,0x01,0x30,0xe0,0x02,0x31,0x4c,0x71,0xc9,0xbf,0x01,
++0x13,0x90,0x91,0x11,0xe0,0xfe,0xa3,0xe0,0xff,0x12,0x44,0xb5,0x90,0x91,0x17,0xe0,
++0x04,0xf0,0x21,0xd9,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x91,0x56,0xe0,0xc4,0x13,0x13,
++0x13,0x54,0x01,0x30,0xe0,0x11,0xe0,0x44,0x80,0xf0,0x90,0x91,0x5e,0xe0,0xc4,0x54,
++0x0f,0x20,0xe0,0x03,0x7f,0x00,0x22,0x7f,0x01,0x22,0x8f,0x1f,0xe4,0x90,0x91,0x22,
++0xf0,0xe5,0x1f,0x14,0xfe,0x90,0x91,0x22,0xe0,0xff,0xc3,0x9e,0x50,0x0e,0xef,0x04,
++0xfd,0x12,0x34,0xb7,0x90,0x91,0x22,0xe0,0x04,0xf0,0x80,0xe5,0xe5,0x1f,0x14,0xff,
++0x7d,0xff,0x12,0x34,0xb7,0x90,0x91,0x22,0xe5,0x1f,0xf0,0x90,0x91,0x22,0xe0,0xc3,
++0x94,0xff,0x50,0x0f,0xe0,0xff,0x04,0xfd,0x12,0x34,0xb7,0x90,0x91,0x22,0xe0,0x04,
++0xf0,0x80,0xe8,0xad,0x1f,0x7f,0xff,0x02,0x34,0xb7,0xc3,0xee,0x94,0x01,0x40,0x0a,
++0x0d,0xed,0x13,0x90,0xfd,0x10,0xf0,0xe4,0x2f,0xff,0x22,0xc3,0xee,0x94,0x01,0x40,
++0x1e,0x90,0xfd,0x11,0xe0,0xb5,0x05,0x14,0x90,0x01,0x17,0xe0,0xb5,0x05,0x07,0x90,
++0xfd,0x11,0xe4,0xf0,0x80,0x06,0xed,0x04,0x90,0xfd,0x11,0xf0,0xe4,0x2f,0xff,0x22,
++0x0f,0x75,};
++
++u8 Rtl8192CUFwUMCACutWWImgArray[UMCACutWWImgArrayLength] = {
++0xc1,0x88,0x02,0x00,0x51,0x00,0x00,0x00,0x03,0x23,0x16,0x44,0x72,0x34,0x01,0x00,
++0x58,0x92,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x02,0x43,0x9d,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x02,0x57,0xcb,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x02,0x5c,0xb6,0x00,0x00,0x00,0x00,0x00,0x02,0x5d,0x99,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0xbb,0x01,0x0c,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe0,0x22,0x50,
++0x06,0xe9,0x25,0x82,0xf8,0xe6,0x22,0xbb,0xfe,0x06,0xe9,0x25,0x82,0xf8,0xe2,0x22,
++0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe4,0x93,0x22,0xbb,0x01,0x06,
++0x89,0x82,0x8a,0x83,0xf0,0x22,0x50,0x02,0xf7,0x22,0xbb,0xfe,0x01,0xf3,0x22,0xf8,
++0xbb,0x01,0x0d,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe8,0xf0,0x22,
++0x50,0x06,0xe9,0x25,0x82,0xc8,0xf6,0x22,0xbb,0xfe,0x05,0xe9,0x25,0x82,0xc8,0xf2,
++0x22,0xc5,0xf0,0xf8,0xa3,0xe0,0x28,0xf0,0xc5,0xf0,0xf8,0xe5,0x82,0x15,0x82,0x70,
++0x02,0x15,0x83,0xe0,0x38,0xf0,0x22,0xbb,0x01,0x10,0xe5,0x82,0x29,0xf5,0x82,0xe5,
++0x83,0x3a,0xf5,0x83,0xe0,0xf5,0xf0,0xa3,0xe0,0x22,0x50,0x09,0xe9,0x25,0x82,0xf8,
++0x86,0xf0,0x08,0xe6,0x22,0xbb,0xfe,0x0a,0xe9,0x25,0x82,0xf8,0xe2,0xf5,0xf0,0x08,
++0xe2,0x22,0xe5,0x83,0x2a,0xf5,0x83,0xe9,0x93,0xf5,0xf0,0xa3,0xe9,0x93,0x22,0xf8,
++0xbb,0x01,0x11,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe8,0xf0,0xe5,
++0xf0,0xa3,0xf0,0x22,0x50,0x09,0xe9,0x25,0x82,0xc8,0xf6,0x08,0xa6,0xf0,0x22,0xbb,
++0xfe,0x09,0xe9,0x25,0x82,0xc8,0xf2,0xe5,0xf0,0x08,0xf2,0x22,0xef,0x4b,0xff,0xee,
++0x4a,0xfe,0xed,0x49,0xfd,0xec,0x48,0xfc,0x22,0xe0,0xfc,0xa3,0xe0,0xfd,0xa3,0xe0,
++0xfe,0xa3,0xe0,0xff,0x22,0xa4,0x25,0x82,0xf5,0x82,0xe5,0xf0,0x35,0x83,0xf5,0x83,
++0x22,0xe0,0xfb,0xa3,0xe0,0xfa,0xa3,0xe0,0xf9,0x22,0xf8,0xe0,0xfb,0xa3,0xa3,0xe0,
++0xf9,0x25,0xf0,0xf0,0xe5,0x82,0x15,0x82,0x70,0x02,0x15,0x83,0xe0,0xfa,0x38,0xf0,
++0x22,0xeb,0xf0,0xa3,0xea,0xf0,0xa3,0xe9,0xf0,0x22,0xd0,0x83,0xd0,0x82,0xf8,0xe4,
++0x93,0x70,0x12,0x74,0x01,0x93,0x70,0x0d,0xa3,0xa3,0x93,0xf8,0x74,0x01,0x93,0xf5,
++0x82,0x88,0x83,0xe4,0x73,0x74,0x02,0x93,0x68,0x60,0xef,0xa3,0xa3,0xa3,0x80,0xdf,
++0xd0,0x83,0xd0,0x82,0xf8,0xe4,0x93,0x70,0x12,0x74,0x01,0x93,0x70,0x0d,0xa3,0xa3,
++0x93,0xf8,0x74,0x01,0x93,0xf5,0x82,0x88,0x83,0xe4,0x73,0x74,0x02,0x93,0xb5,0xf0,
++0x06,0x74,0x03,0x93,0x68,0x60,0xe9,0xa3,0xa3,0xa3,0xa3,0x80,0xd8,0x02,0x43,0xdb,
++0x02,0x50,0x2a,0xe4,0x93,0xa3,0xf8,0xe4,0x93,0xa3,0x40,0x03,0xf6,0x80,0x01,0xf2,
++0x08,0xdf,0xf4,0x80,0x29,0xe4,0x93,0xa3,0xf8,0x54,0x07,0x24,0x0c,0xc8,0xc3,0x33,
++0xc4,0x54,0x0f,0x44,0x20,0xc8,0x83,0x40,0x04,0xf4,0x56,0x80,0x01,0x46,0xf6,0xdf,
++0xe4,0x80,0x0b,0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80,0x90,0x44,0x20,0xe4,0x7e,
++0x01,0x93,0x60,0xbc,0xa3,0xff,0x54,0x3f,0x30,0xe5,0x09,0x54,0x1f,0xfe,0xe4,0x93,
++0xa3,0x60,0x01,0x0e,0xcf,0x54,0xc0,0x25,0xe0,0x60,0xa8,0x40,0xb8,0xe4,0x93,0xa3,
++0xfa,0xe4,0x93,0xa3,0xf8,0xe4,0x93,0xa3,0xc8,0xc5,0x82,0xc8,0xca,0xc5,0x83,0xca,
++0xf0,0xa3,0xc8,0xc5,0x82,0xc8,0xca,0xc5,0x83,0xca,0xdf,0xe9,0xde,0xe7,0x80,0xbe,
++0x41,0x91,0x40,0x00,0x41,0x91,0x9c,0x00,0x41,0x91,0x23,0x80,0x41,0x91,0x24,0x80,
++0x41,0x91,0x9e,0x00,0x41,0x91,0x52,0x00,0x41,0x91,0x93,0x00,0x41,0x91,0x91,0x00,
++0x41,0x91,0x90,0x00,0x41,0x91,0x92,0x00,0x00,0xf0,0x90,0x91,0x30,0xe0,0x90,0x91,
++0x67,0xf0,0xe4,0xfb,0xfd,0x7f,0x54,0x7e,0x01,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,
++0x90,0x91,0x65,0xeb,0xf0,0xa3,0xe0,0xfb,0xa3,0xe0,0xf5,0x44,0xe4,0xf5,0x45,0x12,
++0x30,0x62,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x01,0x5f,0xe4,0xf0,0x90,0x01,0x3c,0x74,
++0x08,0xf0,0xe4,0x90,0x91,0x66,0xf0,0x90,0x91,0x2d,0xe0,0x90,0x91,0x67,0xf0,0xe4,
++0xfb,0xfd,0x7f,0x5c,0x7e,0x01,0x91,0x59,0x90,0x01,0x5f,0x74,0x05,0xf0,0x90,0x06,
++0x92,0x74,0x02,0xf0,0x90,0x91,0x36,0x14,0xf0,0xe5,0x6e,0x54,0x0f,0xc3,0x94,0x0c,
++0x50,0x02,0xf1,0x23,0x22,0x90,0x02,0x84,0xef,0xf0,0xa3,0xee,0xf0,0xa3,0x74,0x05,
++0xf0,0x22,0x7d,0x01,0xaf,0x6f,0xe1,0x27,0xf1,0xe6,0xbf,0x01,0x10,0x90,0x91,0x42,
++0xe0,0xff,0xe4,0xfd,0x12,0x48,0x22,0x90,0x04,0x1f,0x74,0x20,0xf0,0x22,0x8f,0x82,
++0x8e,0x83,0xa3,0xa3,0xa3,0xe4,0xf0,0x22,0xe4,0xf5,0x72,0x7f,0x60,0x7e,0x01,0x80,
++0xed,0x7f,0x00,0x22,0x90,0x91,0x53,0xe0,0x54,0xfe,0xf0,0x02,0x50,0xd6,0x22,0xe4,
++0xf5,0x75,0x22,0x02,0x5f,0xe2,0x02,0x5f,0xe9,0xef,0x8e,0xf0,0x71,0x70,0x45,0x26,
++0x00,0x40,0x45,0x4e,0x00,0x80,0x45,0x79,0x01,0x00,0x45,0x8d,0x02,0x00,0x45,0xa5,
++0x04,0x00,0x00,0x00,0x45,0xc2,0xed,0x54,0x3f,0x70,0x04,0xfe,0xff,0x80,0x04,0x7e,
++0x00,0x7f,0x40,0xef,0x2d,0xff,0xee,0x3c,0xfe,0xef,0x78,0x06,0xce,0xc3,0x13,0xce,
++0x13,0xd8,0xf9,0x78,0x06,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0x80,0x26,0xed,0x54,
++0x7f,0x70,0x04,0xfe,0xff,0x80,0x04,0x7e,0x00,0x7f,0x80,0xef,0x2d,0xff,0xee,0x3c,
++0xfe,0xef,0x78,0x07,0xce,0xc3,0x13,0xce,0x13,0xd8,0xf9,0x78,0x07,0xc3,0x33,0xce,
++0x33,0xce,0xd8,0xf9,0xfd,0xac,0x06,0x80,0x49,0xed,0x70,0x04,0xfe,0xff,0x80,0x04,
++0x7e,0x01,0x7f,0x00,0xef,0x2d,0xee,0x3c,0x7d,0x00,0xfc,0x80,0x35,0xec,0x54,0x01,
++0x4d,0x70,0x04,0xfe,0xff,0x80,0x04,0x7e,0x02,0x7f,0x00,0xef,0x2d,0xee,0x3c,0xc3,
++0x13,0x7d,0x00,0x80,0x1a,0xec,0x54,0x03,0x4d,0x70,0x04,0xfe,0xff,0x80,0x04,0x7e,
++0x04,0x7f,0x00,0xef,0x2d,0xee,0x3c,0x13,0x13,0x54,0x3f,0x7d,0x00,0x25,0xe0,0x25,
++0xe0,0xfc,0xae,0x04,0xaf,0x05,0x22,0x90,0x91,0x09,0x12,0x25,0x14,0x00,0x00,0x00,
++0x00,0x90,0x06,0xa9,0xe0,0x90,0x91,0x08,0xf0,0xe0,0x54,0xc0,0x70,0x0a,0x53,0x71,
++0xfe,0x53,0x71,0xfd,0x91,0xc2,0x80,0x47,0x90,0x91,0x26,0xe0,0x60,0x41,0x90,0x91,
++0x38,0xe0,0x70,0x3b,0x90,0x91,0x38,0x74,0x01,0xf0,0x7f,0x00,0x7e,0x08,0x12,0x22,
++0x65,0x90,0x91,0x09,0x12,0x25,0x08,0x90,0x91,0x09,0x71,0x09,0xec,0x44,0x02,0xfc,
++0x90,0x91,0x09,0x12,0x25,0x08,0x90,0x91,0x09,0x71,0x09,0x90,0x80,0x96,0x12,0x25,
++0x08,0x7f,0x00,0x7e,0x08,0x12,0x2b,0x08,0x90,0x02,0x86,0xe0,0x54,0xfb,0xf0,0x90,
++0x91,0x08,0xe0,0x30,0xe6,0x13,0x43,0x71,0x01,0x90,0x91,0x3b,0xe0,0x64,0x02,0x60,
++0x04,0x91,0xc8,0x80,0x07,0x91,0x77,0x80,0x03,0x53,0x71,0xfe,0x90,0x91,0x08,0xe0,
++0x30,0xe7,0x16,0x43,0x71,0x02,0xe4,0x90,0x91,0x66,0x91,0x49,0x90,0x01,0x57,0x74,
++0x05,0xf0,0x90,0x91,0x3c,0x74,0x01,0xf0,0x22,0x53,0x71,0xfd,0x22,0xd3,0x10,0xaf,
++0x01,0xc3,0xc0,0xd0,0x8b,0x60,0x8a,0x61,0x89,0x62,0x90,0x91,0x68,0x71,0x41,0xab,
++0x63,0xaa,0x64,0xa9,0x65,0x90,0x91,0x6b,0x71,0x41,0xaf,0x66,0x15,0x66,0xef,0x60,
++0x1b,0x90,0x91,0x6b,0xe4,0x75,0xf0,0x01,0x71,0x2a,0x12,0x24,0x62,0xff,0x90,0x91,
++0x68,0xe4,0x75,0xf0,0x01,0x71,0x2a,0xef,0x51,0x4d,0x80,0xde,0xab,0x60,0xaa,0x61,
++0xa9,0x62,0xd0,0xd0,0x92,0xaf,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,
++0x6e,0x71,0x41,0x90,0x91,0x9e,0xe0,0xff,0x04,0xf0,0x90,0x00,0x01,0xef,0x51,0x5f,
++0x7f,0xaf,0x7e,0x01,0x12,0x64,0x1c,0xef,0x60,0x44,0x90,0x91,0x6e,0x71,0x21,0x8b,
++0x63,0x8a,0x64,0x89,0x65,0x75,0x66,0x02,0x7b,0x01,0x7a,0x01,0x79,0xa0,0xd1,0x6d,
++0x90,0x91,0x71,0x71,0x21,0x8b,0x63,0x8a,0x64,0x89,0x65,0x90,0x91,0x6e,0x71,0x21,
++0x12,0x24,0x62,0xff,0xc4,0x54,0x0f,0xf5,0x66,0x7b,0x01,0x7a,0x01,0x79,0xa2,0xd1,
++0x6d,0x90,0x01,0xaf,0x74,0xff,0xf0,0x90,0x01,0xcb,0xe0,0x64,0x80,0xf0,0xd0,0xd0,
++0x92,0xaf,0x22,0x7d,0x01,0x7f,0x0c,0x90,0x91,0x95,0xed,0xf0,0x90,0x91,0x94,0xef,
++0xf0,0x54,0x0f,0xff,0xe5,0x6e,0x54,0x0f,0x6f,0x60,0x76,0x90,0x91,0x94,0xe0,0x30,
++0xe2,0x30,0xe5,0x6e,0x20,0xe2,0x05,0x7f,0x01,0x12,0x62,0x65,0xe5,0x6e,0x30,0xe3,
++0x0f,0x90,0x91,0x94,0xe0,0x20,0xe3,0x08,0x12,0x5a,0x3f,0xef,0x60,0x53,0x80,0x52,
++0xe5,0x6e,0x20,0xe3,0x4c,0x90,0x91,0x94,0xe0,0x30,0xe3,0x45,0xa3,0xe0,0xff,0x02,
++0x62,0x4a,0xe5,0x6e,0x54,0x0f,0xff,0xbf,0x0c,0x0f,0x90,0x91,0x94,0xe0,0x20,0xe3,
++0x08,0x12,0x5a,0x3f,0xef,0x60,0x2a,0xf1,0xb2,0xe5,0x6e,0x54,0x0f,0xff,0xbf,0x04,
++0x10,0x90,0x91,0x94,0xe0,0x20,0xe2,0x09,0x12,0x5b,0xb3,0xef,0x60,0x13,0x12,0x48,
++0xce,0xe5,0x6e,0x54,0x0f,0xff,0xbf,0x02,0x08,0x91,0xf1,0xef,0x60,0x03,0x12,0x63,
++0x56,0x22,0x90,0x06,0x04,0xe0,0x44,0x40,0xf0,0xe5,0x6d,0xb4,0x01,0x04,0x7f,0x01,
++0xf1,0xc9,0x53,0x6e,0xf0,0x43,0x6e,0x04,0x22,0x8f,0x67,0xf1,0xe6,0xbf,0x01,0x15,
++0x90,0x91,0x43,0x12,0x48,0x1e,0xad,0x07,0xac,0x06,0xaf,0x67,0x12,0x61,0xa3,0x90,
++0x04,0x1f,0x74,0x20,0xf0,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x01,0xc4,
++0x74,0xe6,0xf0,0x74,0x47,0xa3,0xf0,0x90,0x04,0x1d,0xe0,0x60,0x1a,0x90,0x05,0x22,
++0xe0,0x54,0x90,0x60,0x07,0x90,0x01,0xc6,0xe0,0x44,0x40,0xf0,0x90,0x01,0xc7,0xe0,
++0x30,0xe1,0xe4,0x7f,0x00,0x80,0x02,0x7f,0x01,0xd0,0xd0,0x92,0xaf,0x22,0xe0,0xff,
++0x7d,0x01,0x90,0x91,0x74,0xef,0xf0,0xa3,0xed,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xe5,
++0x70,0x60,0x04,0xe4,0xff,0x11,0xb3,0x90,0x91,0x74,0xe0,0x30,0xe0,0x09,0x90,0x91,
++0x76,0xe4,0xf0,0xa3,0x74,0x80,0xf0,0x90,0x91,0x74,0xe0,0xff,0xc3,0x13,0x90,0xfd,
++0x10,0xf0,0x90,0x04,0x25,0xef,0xf0,0x90,0x91,0x75,0xe0,0x60,0x1f,0xa3,0xa3,0xe0,
++0xff,0x24,0x0f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x80,0xf0,0x74,0x10,
++0x2f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x80,0xf0,0x90,0x91,0x76,0xa3,
++0xe0,0xff,0xfd,0x24,0x08,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe4,0xf0,0x74,0x09,
++0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xf0,0xf0,0x74,0x21,0x2f,0xf5,
++0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xf7,0xf0,0x90,0x91,0x76,0xe0,0xfe,0xa3,
++0xe0,0xff,0x22,0xef,0x60,0x0b,0x90,0x91,0x51,0xe0,0xb4,0x01,0x10,0xe4,0xff,0x80,
++0x09,0x90,0x91,0x51,0xe0,0xb4,0x01,0x05,0x7f,0x01,0x12,0x68,0x87,0x22,0x90,0x01,
++0x37,0x74,0x02,0xf0,0x90,0x05,0x22,0x74,0xff,0xf0,0x12,0x68,0x46,0xef,0x70,0x06,
++0x90,0x01,0xc8,0x74,0xfd,0xf0,0x7d,0x02,0x7f,0x03,0x12,0x31,0x9d,0xe5,0x70,0x60,
++0x04,0x7f,0x01,0x11,0xb3,0x51,0x0c,0x53,0x6e,0xf0,0x43,0x6e,0x02,0x22,0xef,0x64,
++0x01,0x70,0x42,0x7d,0x78,0x7f,0x02,0x12,0x31,0x2c,0x7d,0x02,0x7f,0x03,0x12,0x31,
++0x2c,0x90,0x01,0x36,0x74,0x03,0xf0,0xfd,0x7f,0x02,0x12,0x31,0x9d,0x7d,0x10,0x7f,
++0x03,0x12,0x31,0x49,0x90,0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x12,
++0x47,0x23,0xe4,0xff,0x11,0xb3,0x90,0x06,0x04,0xe0,0x54,0x7f,0xf0,0x90,0x06,0x0a,
++0xe0,0x54,0xf8,0xf0,0x22,0x90,0x01,0x36,0x74,0x7b,0xf0,0xa3,0x74,0x02,0xf0,0x7d,
++0x7b,0xff,0x12,0x31,0x9d,0x7d,0x02,0x7f,0x03,0x12,0x31,0x9d,0x7d,0x10,0x7f,0x03,
++0x12,0x31,0x49,0x90,0x06,0x04,0xe0,0x44,0x80,0xf0,0x90,0x06,0x0a,0xe0,0x44,0x07,
++0xf0,0x12,0x64,0x11,0xe5,0x6d,0x20,0xe0,0x05,0xe4,0x90,0x91,0x29,0xf0,0x22,0x8b,
++0x0e,0x8a,0x0f,0x89,0x10,0x12,0x62,0x3e,0xab,0x0e,0xaa,0x0f,0xa9,0x10,0x12,0x24,
++0x62,0xf5,0x70,0x14,0x60,0x0e,0x14,0x60,0x1e,0x14,0x60,0x2f,0x24,0x03,0x70,0x40,
++0x7f,0x01,0x80,0x3a,0xab,0x0e,0xaa,0x0f,0xa9,0x10,0x90,0x00,0x02,0x12,0x42,0x20,
++0xfd,0xe4,0xff,0x31,0xe1,0x80,0x27,0xab,0x0e,0xaa,0x0f,0xa9,0x10,0x90,0x00,0x02,
++0x12,0x42,0x20,0xfd,0x7f,0x01,0x31,0xe1,0x1f,0x80,0x13,0xab,0x0e,0xaa,0x0f,0xa9,
++0x10,0x90,0x00,0x02,0x12,0x42,0x20,0xfd,0x7f,0x02,0x31,0xe1,0xe4,0xff,0x11,0xfe,
++0x22,0xef,0x24,0xfe,0x60,0x0b,0x04,0x70,0x22,0x90,0x91,0x39,0x74,0x01,0xf0,0x80,
++0x16,0xed,0x70,0x0a,0x90,0x91,0x35,0xe0,0x90,0x91,0x39,0xf0,0x80,0x05,0x90,0x91,
++0x39,0xed,0xf0,0x90,0x91,0x39,0xe0,0x90,0x91,0x27,0xf0,0x22,0x7f,0x78,0x7e,0x08,
++0x12,0x22,0x65,0x90,0x90,0xd8,0x12,0x25,0x08,0x7f,0x04,0x7e,0x0c,0x12,0x22,0x65,
++0x90,0x90,0xdc,0x12,0x25,0x08,0x7f,0x00,0x7e,0x08,0x12,0x22,0x65,0x90,0x90,0xe0,
++0x12,0x25,0x08,0x90,0x91,0x51,0xe0,0x90,0x90,0xd8,0xb4,0x01,0x0d,0x12,0x43,0x09,
++0xef,0x54,0xc7,0xff,0xed,0x54,0xc7,0xfd,0x80,0x07,0x12,0x43,0x09,0xef,0x54,0xc7,
++0xff,0xec,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x78,0x7e,0x08,0x12,0x2b,0x08,0x90,
++0x90,0xdc,0x12,0x43,0x09,0xef,0x54,0x0f,0xff,0xec,0x90,0x80,0x96,0x12,0x25,0x08,
++0x7f,0x04,0x7e,0x0c,0x12,0x2b,0x08,0x90,0x90,0xe0,0x12,0x43,0x09,0xef,0x44,0x02,
++0xff,0xec,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x00,0x7e,0x08,0x12,0x2b,0x08,0x7f,
++0x70,0x7e,0x0e,0x12,0x22,0x65,0x90,0x90,0xe4,0x12,0x25,0x08,0x90,0x80,0x96,0x12,
++0x25,0x14,0x00,0x1b,0x25,0xa0,0x7f,0x70,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x68,
++0x12,0x25,0x14,0x00,0x00,0x00,0x00,0xe4,0xfd,0xff,0x12,0x30,0x2c,0x90,0x91,0x51,
++0xe0,0xb4,0x01,0x11,0x90,0x80,0x68,0x12,0x25,0x14,0x00,0x00,0x00,0x00,0xe4,0xfd,
++0x7f,0x01,0x12,0x30,0x2c,0x90,0x00,0x11,0xe0,0x54,0xf6,0xf0,0x80,0x08,0xf4,0xff,
++0x90,0x00,0x43,0xe0,0x5f,0xf0,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x7f,0x10,0xdf,
++0xfe,0xd0,0xd0,0x92,0xaf,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,0x9b,
++0xed,0xf0,0x90,0x91,0x9a,0xef,0xf0,0xd3,0x94,0x07,0x50,0x63,0xe0,0xff,0x74,0x01,
++0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x47,0xe0,0x5f,
++0xf0,0x51,0xe6,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,
++0x33,0xd8,0xfc,0xff,0x90,0x00,0x46,0xe0,0x4f,0xf0,0x51,0xe6,0x90,0x91,0x9b,0xe0,
++0x60,0x16,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,
++0xd8,0xfc,0xff,0x90,0x00,0x45,0x80,0x66,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8,
++0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x45,0x80,0x6b,0x90,
++0x91,0x9a,0xe0,0x24,0xf8,0xf0,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,
++0x33,0xd8,0xfc,0xc4,0x54,0xf0,0x51,0xde,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8,
++0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xff,0x90,0x00,0x43,0xe0,0x4f,0xf0,0x51,
++0xe6,0x90,0x91,0x9b,0xe0,0x60,0x1b,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8,0x07,
++0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0,0xff,0x90,0x00,0x42,0xe0,0x4f,
++0x80,0x1a,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,
++0xd8,0xfc,0xc4,0x54,0xf0,0xf4,0xff,0x90,0x00,0x42,0xe0,0x5f,0xf0,0x51,0xe6,0xd0,
++0xd0,0x92,0xaf,0x22,0xf0,0x90,0x00,0x45,0xe0,0x54,0xfe,0xfd,0x7f,0x45,0xd3,0x10,
++0xaf,0x01,0xc3,0xc0,0xd0,0x8f,0x82,0x75,0x83,0x00,0xed,0xf0,0x51,0xe6,0xd0,0xd0,
++0x92,0xaf,0x22,0xef,0x14,0x60,0x30,0x14,0x60,0x66,0x24,0x02,0x60,0x02,0x81,0xaa,
++0x90,0x90,0xf3,0x74,0x02,0xf0,0x90,0x00,0x48,0xe0,0x44,0x0c,0xfd,0x7f,0x48,0x71,
++0xee,0x90,0x00,0x47,0xe0,0x44,0x08,0xfd,0x7f,0x47,0x71,0xee,0x90,0x00,0x45,0xe0,
++0x44,0x10,0xfd,0x7f,0x45,0x80,0x71,0xe4,0x90,0x90,0xf3,0xf0,0x90,0x90,0xef,0x12,
++0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x80,0x7e,0x08,0x12,0x2b,0x08,0x90,
++0x00,0x45,0xe0,0x44,0xef,0xfd,0x7f,0x45,0x71,0xee,0x90,0x00,0x45,0xe0,0x54,0xef,
++0xfd,0x7f,0x45,0x71,0xee,0x90,0x00,0x46,0xe0,0x44,0x10,0xfd,0x7f,0x46,0x80,0x38,
++0x90,0x90,0xf3,0x74,0x01,0xf0,0x90,0x90,0xf9,0x12,0x43,0x09,0x90,0x80,0x96,0x12,
++0x25,0x08,0x7f,0x80,0x7e,0x08,0x12,0x2b,0x08,0x90,0x00,0x45,0xe0,0x44,0x20,0xfd,
++0x7f,0x45,0x71,0xee,0x90,0x00,0x45,0xe0,0x44,0x10,0xfd,0x7f,0x45,0x71,0xee,0x90,
++0x00,0x46,0xe0,0x44,0x10,0xfd,0x7f,0x46,0x71,0xee,0x22,0x90,0x00,0x02,0x12,0x42,
++0x20,0x90,0x90,0xf5,0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0x25,0xe0,0x25,0xe0,0x90,
++0x90,0xf4,0xf0,0x12,0x24,0x62,0x25,0xe0,0x25,0xe0,0x90,0x90,0xf8,0xf0,0x90,0x05,
++0x60,0xe0,0x90,0x91,0x03,0xf0,0x90,0x05,0x61,0xe0,0x90,0x91,0x04,0xf0,0x90,0x05,
++0x62,0xe0,0x90,0x91,0x05,0xf0,0x90,0x05,0x63,0xe0,0x90,0x91,0x06,0xf0,0xa2,0xaf,
++0xe4,0x33,0x90,0x91,0x1c,0xf0,0xc2,0xaf,0x90,0x90,0xf4,0xe0,0xff,0x12,0x6e,0x67,
++0x90,0x91,0x1c,0xe0,0x24,0xff,0x92,0xaf,0x90,0x90,0xf5,0xe0,0x70,0x02,0xa1,0xb2,
++0x90,0x90,0xf4,0xe0,0x70,0x02,0xa1,0xb2,0x90,0x90,0xf8,0xe0,0x70,0x02,0xa1,0xb2,
++0xa2,0xaf,0xe4,0x33,0x90,0x91,0x1c,0xf0,0xc2,0xaf,0x90,0x91,0x07,0x74,0x01,0xf0,
++0x90,0x91,0x1c,0xe0,0x24,0xff,0x92,0xaf,0x71,0xe5,0x90,0x00,0x46,0xe0,0x44,0x01,
++0xfd,0x7f,0x46,0x71,0xee,0x90,0x90,0xed,0xe0,0x60,0x15,0x90,0x90,0xf9,0x12,0x43,
++0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x80,0x7e,0x08,0x12,0x2b,0x08,0x80,0x06,
++0x90,0x05,0x22,0x74,0x7f,0xf0,0x90,0x00,0x45,0xe0,0x54,0xef,0xfd,0x7f,0x45,0x71,
++0xee,0x90,0x05,0x87,0xe0,0x64,0x80,0xf0,0x90,0x91,0x03,0xe0,0x90,0x05,0x84,0xf0,
++0x90,0x91,0x04,0xe0,0x90,0x05,0x85,0xf0,0x90,0x91,0x05,0xe0,0x90,0x05,0x86,0xf0,
++0x90,0x91,0x06,0xe0,0x90,0x05,0x87,0xf0,0xa2,0xaf,0xe4,0x33,0x90,0x91,0x1c,0xf0,
++0xc2,0xaf,0x90,0x01,0x3c,0xe0,0x44,0x20,0xf0,0x7d,0x20,0xe4,0xff,0x12,0x31,0xb7,
++0x80,0x2b,0x90,0x90,0xf5,0xe0,0x70,0x2d,0x90,0x91,0x07,0x71,0xe4,0x90,0x00,0x46,
++0xe0,0x54,0xfe,0xfd,0x7f,0x46,0x71,0xee,0x90,0x05,0x22,0xe4,0xf0,0xa2,0xaf,0x33,
++0x90,0x91,0x1c,0xf0,0xc2,0xaf,0x7d,0x20,0xe4,0xff,0x12,0x31,0x49,0x90,0x91,0x1c,
++0xe0,0x24,0xff,0x92,0xaf,0x22,0x8b,0x0e,0x8a,0x0f,0x89,0x10,0x90,0x00,0x02,0x12,
++0x42,0x20,0x90,0x90,0xf6,0xf0,0xe0,0x30,0xe0,0x4b,0x90,0x90,0xed,0x74,0x01,0xf0,
++0x7f,0x80,0x7e,0x08,0x12,0x22,0x65,0x90,0x90,0xef,0x12,0x25,0x08,0xab,0x0e,0xaa,
++0x0f,0xa9,0x10,0x90,0x00,0x01,0x12,0x42,0x20,0xff,0xe4,0xfc,0xfd,0xfe,0x78,0x1a,
++0x12,0x24,0xf5,0xa8,0x04,0xa9,0x05,0xaa,0x06,0xab,0x07,0x90,0x90,0xef,0x12,0x43,
++0x09,0xec,0x54,0x03,0xfc,0x12,0x42,0xfc,0x90,0x90,0xf9,0x12,0x25,0x08,0x90,0x05,
++0x22,0xe4,0xf0,0x80,0x2d,0xe4,0x90,0x90,0xed,0xf0,0x7f,0x80,0x7e,0x08,0x12,0x22,
++0x65,0xec,0x54,0x03,0xfc,0xec,0x44,0xc0,0xfc,0x90,0x90,0xef,0x12,0x25,0x08,0x90,
++0x90,0xef,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x80,0x7e,0x08,0x12,
++0x2b,0x08,0x90,0x90,0xf6,0xe0,0x30,0xe1,0x19,0x7d,0x0c,0x7f,0x47,0x71,0xee,0x90,
++0x00,0x48,0xe0,0x44,0x0c,0xfd,0x7f,0x48,0x71,0xee,0x90,0x00,0x46,0xe0,0x44,0x10,
++0x80,0x1c,0x90,0x00,0x47,0xe0,0x54,0xf3,0xfd,0x7f,0x47,0x71,0xee,0x90,0x00,0x48,
++0xe0,0x54,0xf3,0xfd,0x7f,0x48,0x71,0xee,0x90,0x00,0x46,0xe0,0x54,0xef,0xfd,0x7f,
++0x46,0x71,0xee,0xe4,0x90,0x90,0xf3,0xf0,0x22,0x90,0x01,0x3c,0x74,0xff,0xf0,0xa3,
++0xf0,0xa3,0xf0,0x90,0x01,0x34,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xfd,0x7f,0x54,
++0x71,0xee,0x7d,0xff,0x7f,0x55,0x71,0xee,0x7d,0xff,0x7f,0x56,0x71,0xee,0x7d,0xff,
++0x7f,0x57,0x61,0xee,0x90,0x01,0x30,0xe4,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,
++0x01,0x38,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xfd,0x7f,0x50,0x71,0xee,0xe4,0xfd,
++0x7f,0x51,0x71,0xee,0xe4,0xfd,0x7f,0x52,0x71,0xee,0xe4,0xfd,0x7f,0x53,0x61,0xee,
++0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,0x22,0xed,0xf0,0x90,0x91,0x21,0xef,
++0xf0,0xd3,0x94,0x07,0x50,0x4e,0xa3,0xe0,0x70,0x1a,0x90,0x91,0x21,0xe0,0xff,0x74,
++0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x47,0xe0,
++0x5f,0xf0,0x80,0x17,0x90,0x91,0x21,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,
++0xc3,0x33,0xd8,0xfc,0xff,0x90,0x00,0x47,0xe0,0x4f,0xf0,0x51,0xe6,0x90,0x91,0x21,
++0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,
++0x00,0x46,0x80,0x59,0x90,0x91,0x21,0xe0,0x24,0xf8,0xf0,0xa3,0xe0,0x70,0x1d,0x90,
++0x91,0x21,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xc4,
++0x54,0xf0,0xf4,0xff,0x90,0x00,0x43,0xe0,0x5f,0xf0,0x80,0x1a,0x90,0x91,0x21,0xe0,
++0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0,0xff,
++0x90,0x00,0x43,0xe0,0x4f,0xf0,0x51,0xe6,0x90,0x91,0x21,0xe0,0xff,0x74,0x01,0xa8,
++0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x43,0xe0,0x5f,0xf0,
++0x51,0xe6,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x00,0x49,0xe0,0x90,0x91,0x9f,0xf0,0xe0,
++0x54,0x0f,0xf0,0x44,0xf0,0xfd,0x7f,0x49,0x71,0xee,0x90,0x91,0x9f,0xe0,0x44,0xb0,
++0xfd,0x7f,0x49,0x61,0xee,0x12,0x47,0xe6,0xbf,0x01,0x10,0x90,0x02,0x09,0xe0,0xff,
++0x7d,0x01,0x12,0x48,0x22,0x90,0x04,0x1f,0x74,0x20,0xf0,0x22,0x75,0x28,0x33,0xe4,
++0xf5,0x29,0x75,0x2a,0x07,0xf5,0x2b,0x90,0x01,0x30,0xe5,0x28,0xf0,0xa3,0xe5,0x29,
++0xf0,0xa3,0xe5,0x2a,0xf0,0xa3,0xe5,0x2b,0xf0,0x22,0xe4,0x90,0x91,0x0e,0xf0,0xa3,
++0xf0,0x75,0x8e,0x02,0xf1,0x25,0xd1,0xe8,0x90,0x91,0x4f,0xef,0xf0,0xf1,0x0b,0x90,
++0x91,0x51,0xef,0xf0,0xf1,0x60,0x90,0x91,0x3d,0xee,0xf0,0xa3,0xef,0xf0,0xe4,0xf5,
++0x57,0xf1,0x02,0x12,0x61,0xc4,0x12,0x2e,0x01,0x12,0x44,0xff,0x11,0x0c,0xf1,0x36,
++0xd1,0xfb,0xd1,0xd0,0x12,0x44,0xfe,0x31,0x13,0x12,0x44,0xf4,0x12,0x6e,0x09,0x90,
++0x91,0x10,0xe5,0xd9,0xf0,0x12,0x4e,0xb9,0xc2,0xaf,0x90,0x00,0x80,0xe0,0x44,0x40,
++0xf0,0x12,0x4a,0xe6,0x75,0xe8,0x03,0x43,0xa8,0x85,0xd2,0xaf,0x90,0x91,0x0e,0xe0,
++0x64,0x01,0xf0,0x24,0x2a,0x90,0x01,0xc4,0xf0,0x74,0x50,0xa3,0xf0,0xe5,0x57,0x30,
++0xe2,0x10,0x12,0x5f,0xf0,0xbf,0x01,0x0a,0xc2,0xaf,0x53,0x57,0xfb,0xd2,0xaf,0x12,
++0x71,0x97,0xe5,0x57,0x30,0xe4,0x0a,0xc2,0xaf,0x53,0x57,0xef,0xd2,0xaf,0x12,0x60,
++0x2d,0x90,0x90,0xf7,0xe0,0x70,0x03,0x12,0x70,0x74,0x11,0xe7,0x90,0x91,0x3f,0xe0,
++0x90,0x01,0xba,0xf0,0x80,0xb6,0xe4,0x90,0x91,0x55,0xf0,0x90,0x91,0x53,0xe0,0x54,
++0x7f,0xf0,0xa3,0x74,0x0a,0xf0,0x22,0x90,0x06,0x34,0xe0,0x60,0x25,0x14,0x70,0x1b,
++0x7b,0x01,0x7a,0x06,0x79,0x35,0x7f,0xf9,0x7e,0x01,0x12,0x67,0xe4,0xbf,0x01,0x09,
++0x90,0x06,0x35,0xe0,0x54,0x0f,0xf0,0x80,0x04,0x80,0x00,0xe1,0x17,0xe4,0x90,0x06,
++0x34,0xf0,0x22,0x90,0x91,0x56,0xe0,0x54,0xfe,0xf0,0xe0,0x54,0x7f,0xf0,0x90,0x01,
++0x17,0xe0,0xfe,0x90,0x01,0x16,0xe0,0x7c,0x00,0x24,0x00,0xff,0xec,0x3e,0x90,0x91,
++0x5c,0xf0,0xa3,0xef,0xf0,0x90,0x01,0x04,0xe0,0x54,0x0f,0x90,0x91,0x1c,0xf0,0xe0,
++0xff,0x74,0x40,0x7e,0x00,0xa8,0x07,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,
++0xf9,0x90,0x91,0x5b,0xf0,0xee,0x90,0x91,0x5a,0xf0,0x90,0x91,0x5e,0xe0,0x54,0xfe,
++0xf0,0xe0,0x54,0xfd,0xf0,0xe0,0x54,0xfb,0xf0,0xe0,0x54,0xf7,0xf0,0xe0,0x54,0xef,
++0xf0,0xe0,0x54,0xdf,0xf0,0xe0,0x54,0xbf,0xf0,0xe0,0x54,0x7f,0xf0,0xe4,0xa3,0xf0,
++0xa3,0xf0,0xa3,0xe0,0x54,0xfe,0xf0,0xe0,0x54,0xfd,0xf0,0xe0,0x54,0xf7,0xf0,0x22,
++0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x12,0x24,0x62,0x54,0x01,0xff,0x90,0x91,0x56,
++0xe0,0x54,0xfe,0x4f,0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0x90,0x91,0x57,0xf0,0x90,
++0x00,0x02,0x12,0x42,0x20,0x90,0x91,0x58,0xf0,0x90,0x91,0x56,0xe0,0x30,0xe0,0x1a,
++0x90,0x06,0x09,0xe0,0x54,0xfe,0xf0,0x90,0x02,0x86,0xe0,0x44,0x04,0xf0,0x43,0x57,
++0x04,0x7d,0x08,0xe4,0xff,0x12,0x31,0x9d,0x80,0x12,0x7d,0x08,0xe4,0xff,0x12,0x31,
++0x2c,0x90,0x02,0x86,0xe0,0x54,0xfb,0xf0,0x31,0xf1,0x31,0x13,0xd0,0xd0,0x92,0xaf,
++0x22,0x90,0x06,0x90,0xe4,0xf0,0x21,0x5a,0x90,0x91,0x19,0x12,0x43,0x41,0xef,0x12,
++0x43,0x4a,0x52,0x30,0x01,0x52,0x39,0x02,0x52,0x5b,0x03,0x52,0x64,0x09,0x52,0x6c,
++0x0c,0x52,0x75,0x0d,0x52,0x7d,0x0e,0x52,0x8e,0x1a,0x52,0x96,0x2c,0x52,0x41,0x2d,
++0x52,0x4a,0x2e,0x52,0x9e,0x30,0x52,0x53,0x3b,0x52,0x86,0x3c,0x00,0x00,0x52,0xa6,
++0x90,0x91,0x19,0x12,0x43,0x21,0x02,0x64,0x72,0x90,0x91,0x19,0x12,0x43,0x21,0xc1,
++0xf5,0x90,0x91,0x19,0x12,0x43,0x21,0x02,0x65,0x8d,0x90,0x91,0x19,0x12,0x43,0x21,
++0x02,0x65,0xd5,0x90,0x91,0x19,0x12,0x43,0x21,0xe1,0x4b,0x90,0x91,0x19,0x12,0x43,
++0x21,0x02,0x66,0x0e,0x90,0x91,0x19,0x12,0x43,0x21,0x80,0x42,0x90,0x91,0x19,0x12,
++0x43,0x21,0x02,0x4c,0xab,0x90,0x91,0x19,0x12,0x43,0x21,0xe1,0x98,0x90,0x91,0x19,
++0x12,0x43,0x21,0x02,0x4d,0xe6,0x90,0x91,0x19,0x12,0x43,0x21,0x21,0x90,0x90,0x91,
++0x19,0x12,0x43,0x21,0xa1,0x9b,0x90,0x91,0x19,0x12,0x43,0x21,0x81,0x7a,0x90,0x91,
++0x19,0x12,0x43,0x21,0xe1,0x78,0x90,0x01,0xc6,0xe0,0x44,0x01,0xf0,0x22,0xd3,0x10,
++0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,0x1c,0x12,0x43,0x41,0x90,0x91,0x1c,0x12,0x43,
++0x21,0x90,0x00,0x01,0x12,0x42,0x97,0xfa,0xe5,0xf0,0x24,0x00,0xff,0xe4,0x3a,0xfe,
++0x90,0x91,0x1c,0x12,0x43,0x21,0x90,0x00,0x01,0xee,0x8f,0xf0,0x12,0x42,0xcf,0x12,
++0x24,0x62,0xff,0x60,0x2c,0xb5,0x72,0x16,0x90,0x91,0x1c,0x12,0x43,0x21,0x90,0x00,
++0x01,0x12,0x42,0x97,0x65,0x74,0x70,0x04,0xe5,0x73,0x65,0xf0,0x60,0x23,0x90,0x91,
++0x1c,0x12,0x43,0x21,0x90,0x00,0x01,0x12,0x42,0x97,0xff,0xae,0xf0,0x71,0x26,0x80,
++0x10,0x90,0x91,0x1c,0x12,0x43,0x21,0x12,0x24,0x62,0x65,0x72,0x60,0x03,0x12,0x44,
++0xe8,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x91,0x1f,0xee,0xf0,0xa3,0xef,0xf0,0x75,0x72,
++0x01,0x8e,0x73,0xf5,0x74,0xe4,0xfd,0x7f,0x0b,0x12,0x4f,0x10,0xe4,0xfd,0x7f,0x02,
++0x12,0x4f,0x10,0x71,0x6a,0xe4,0xff,0x71,0xcc,0xe4,0xf5,0x76,0x90,0x01,0xc9,0xe5,
++0x76,0xf0,0x90,0x91,0x1f,0xe0,0xfc,0xa3,0xe0,0xfd,0xec,0xfb,0x8d,0x44,0xe4,0xf5,
++0x45,0x7d,0x01,0x7f,0x60,0x7e,0x01,0x02,0x30,0x62,0x7f,0x0b,0x71,0xd9,0xef,0x65,
++0x75,0x60,0x10,0xe5,0x75,0xb4,0x01,0x05,0xe4,0xf5,0x75,0x80,0x03,0x75,0x75,0x01,
++0x7f,0x01,0x22,0x7f,0x00,0x22,0xe5,0x72,0x64,0x01,0x70,0x3f,0x71,0x6a,0xbf,0x01,
++0x04,0x7f,0x01,0x71,0xcc,0x90,0x00,0x46,0xe0,0x44,0x04,0xfd,0x7f,0x46,0x12,0x4b,
++0xee,0x90,0x00,0x44,0xe0,0x54,0xfb,0xfd,0x7f,0x44,0x12,0x4b,0xee,0x90,0x00,0x46,
++0xe0,0x54,0xfb,0xfd,0x7f,0x46,0x12,0x4b,0xee,0x7f,0x02,0x71,0xd9,0x8f,0x76,0x90,
++0x01,0xc9,0xe5,0x76,0xf0,0xb4,0x01,0x03,0x12,0x4f,0xd7,0x22,0x90,0x01,0xca,0xe5,
++0x75,0xf0,0xef,0x60,0x03,0x12,0x4f,0xd7,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,
++0x90,0x91,0xa0,0xef,0xf0,0xd3,0x94,0x07,0x50,0x47,0xe0,0xff,0x74,0x01,0xa8,0x07,
++0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x46,0xe0,0x5f,0xf0,0x12,
++0x4a,0xe6,0x90,0x91,0xa0,0xe0,0xfd,0x74,0x01,0x7e,0x00,0xa8,0x05,0x08,0x80,0x05,
++0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x00,0x44,0xe0,0xfb,0xe4,0xfe,0xef,
++0x5b,0xa8,0x05,0x08,0x80,0x06,0xce,0xa2,0xe7,0x13,0xce,0x13,0xd8,0xf8,0xff,0x80,
++0x44,0x90,0x91,0xa0,0xe0,0x24,0xf8,0xf0,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,
++0x02,0xc3,0x33,0xd8,0xfc,0x12,0x4a,0xde,0x90,0x91,0xa0,0xe0,0xfd,0x74,0x01,0x7e,
++0x00,0xa8,0x05,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x00,
++0x42,0xe0,0xfb,0xe4,0xfe,0xef,0x5b,0xa8,0x05,0x08,0x80,0x06,0xce,0xa2,0xe7,0x13,
++0xce,0x13,0xd8,0xf8,0xff,0xd0,0xd0,0x92,0xaf,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,
++0xd0,0xe4,0xf5,0x10,0x75,0x11,0x04,0xf5,0x12,0xf5,0x14,0xf5,0x15,0x90,0x02,0x09,
++0xe0,0xff,0x12,0x24,0x62,0xfe,0xef,0x2e,0xf5,0x13,0x30,0xe0,0x08,0x75,0x0e,0x00,
++0x75,0x0f,0x80,0x80,0x05,0xe4,0xf5,0x0e,0xf5,0x0f,0xe5,0x13,0xc3,0x13,0x90,0xfd,
++0x10,0xf0,0x74,0x20,0x25,0x10,0xf5,0x10,0xad,0x0f,0xe5,0x10,0x2d,0xff,0x24,0x01,
++0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x90,0x91,0x47,0xf0,0x74,0x02,0x2f,0xf5,
++0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0xfe,0xe5,0x10,0x2d,0x24,0x03,0xf5,0x82,0xe4,
++0x34,0xfc,0xf5,0x83,0xe0,0x24,0x00,0xff,0xe4,0x3e,0x90,0x91,0x48,0xf0,0xa3,0xef,
++0xf0,0x7f,0x04,0xe5,0x10,0x25,0x0f,0x2f,0x24,0x00,0xf5,0x82,0xe4,0x34,0xfc,0xf5,
++0x83,0xe0,0xfe,0x74,0x46,0x2f,0xf5,0x82,0xe4,0x34,0x91,0xf5,0x83,0xee,0xf0,0x0f,
++0xbf,0x08,0xe0,0x12,0x66,0x56,0xef,0x70,0x3f,0x90,0x01,0xc3,0xe0,0x60,0x25,0xc3,
++0xe5,0x15,0x94,0xe8,0xe5,0x14,0x94,0x03,0x40,0x09,0x90,0x01,0xc6,0xe0,0x44,0x10,
++0xf0,0x80,0x63,0x05,0x15,0xe5,0x15,0x70,0x02,0x05,0x14,0x7f,0x0a,0x7e,0x00,0x12,
++0x32,0x15,0x80,0xd5,0x90,0x01,0xc6,0xe0,0x90,0x01,0xc3,0x30,0xe2,0x05,0x74,0xfe,
++0xf0,0x80,0x43,0x74,0xff,0xf0,0x80,0x3e,0xe5,0x10,0xb4,0x78,0x23,0xe4,0xf5,0x10,
++0x05,0x13,0xe5,0x0f,0x64,0x80,0x45,0x0e,0x70,0x06,0xf5,0x0e,0xf5,0x0f,0x80,0x06,
++0x75,0x0e,0x00,0x75,0x0f,0x80,0xe5,0x13,0xc3,0x13,0x90,0xfd,0x10,0xf0,0x80,0x06,
++0x74,0x08,0x25,0x10,0xf5,0x10,0xe5,0x12,0x15,0x12,0x70,0x02,0x15,0x11,0xe5,0x12,
++0x45,0x11,0x60,0x02,0x81,0xb8,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x91,0x1c,0x12,0x43,
++0x41,0x12,0x24,0x62,0xff,0x54,0x01,0xfe,0x90,0x91,0x5e,0xe0,0x54,0xfe,0x4e,0xf0,
++0xef,0x54,0x04,0xff,0xe0,0x54,0xfb,0x4f,0xf0,0x12,0x24,0x62,0xff,0x54,0x02,0xfe,
++0x90,0x91,0x5e,0xe0,0x54,0xfd,0x4e,0xf0,0xef,0x54,0x08,0xff,0xe0,0x54,0xf7,0x4f,
++0xf0,0x12,0x24,0x62,0xff,0x54,0x10,0xfe,0x90,0x91,0x5e,0xe0,0x54,0xef,0x4e,0xf0,
++0xef,0x54,0x20,0xff,0xe0,0x54,0xdf,0x4f,0xf0,0x12,0x24,0x62,0xff,0x54,0x40,0xfe,
++0x90,0x91,0x5e,0xe0,0x54,0xbf,0x4e,0xf0,0xef,0x54,0x80,0xff,0xe0,0x54,0x7f,0x4f,
++0xf0,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x91,0x60,0xf0,0x90,0x00,0x01,0x12,0x42,
++0x20,0x90,0x91,0x5f,0xf0,0x90,0x00,0x03,0x12,0x42,0x20,0xff,0x54,0x01,0xfe,0x90,
++0x91,0x61,0xe0,0x54,0xfe,0x4e,0xf0,0xef,0x54,0x02,0xff,0xe0,0x54,0xfd,0x4f,0xf0,
++0x90,0x00,0x03,0x12,0x42,0x20,0x54,0x04,0xff,0x90,0x91,0x61,0xe0,0x54,0xfb,0x4f,
++0xf0,0x90,0x91,0x5e,0xe0,0x54,0x01,0x90,0x01,0xb8,0xf0,0x90,0x91,0x5e,0xe0,0xff,
++0xc4,0x13,0x54,0x01,0x90,0x01,0xb9,0xf0,0x90,0x91,0x61,0xe0,0x54,0x01,0x90,0x01,
++0xba,0xf0,0xa3,0x74,0xff,0xf0,0x12,0x24,0x62,0x20,0xe0,0x02,0x21,0xf1,0xe4,0xfd,
++0x7f,0x81,0x12,0x4b,0xee,0x90,0x91,0x1c,0x12,0x43,0x21,0x12,0x24,0x62,0xff,0xc3,
++0x13,0x30,0xe0,0x07,0x90,0x06,0x90,0xe0,0x44,0x02,0xf0,0xef,0x13,0x13,0x54,0x3f,
++0x30,0xe0,0x07,0x90,0x06,0x90,0xe0,0x44,0x04,0xf0,0x12,0x24,0x62,0x13,0x13,0x13,
++0x54,0x1f,0x30,0xe0,0x07,0x90,0x06,0x90,0xe0,0x44,0x08,0xf0,0x90,0x91,0x61,0xe0,
++0x30,0xe0,0x1c,0x90,0x91,0x5e,0xe0,0xc4,0x13,0x54,0x07,0x30,0xe0,0x07,0xa3,0xe0,
++0xff,0xe4,0xfd,0x80,0x07,0x90,0x91,0x5f,0xe0,0xff,0x7d,0x01,0x12,0x4a,0xf6,0x22,
++0x75,0x30,0x1f,0x75,0x31,0x01,0xe4,0xf5,0x32,0x90,0x01,0x38,0xe5,0x30,0xf0,0xa3,
++0xe5,0x31,0xf0,0xa3,0xe5,0x32,0xf0,0x22,0x90,0x00,0x02,0xe0,0x54,0xe0,0x7f,0x01,
++0x60,0x02,0x7f,0x00,0x22,0x12,0x24,0x62,0xf5,0x6d,0x22,0x90,0x01,0x64,0x74,0xa0,
++0xf0,0x22,0x90,0x91,0x51,0xe0,0x90,0x90,0xe8,0xf0,0x22,0x90,0x00,0xf3,0xe0,0x7f,
++0x00,0x30,0xe3,0x02,0x7f,0x01,0x22,0x90,0x06,0x34,0x74,0xff,0xf0,0xe4,0xa3,0xf0,
++0xa3,0xf0,0xa3,0xf0,0x22,0xe4,0x90,0x91,0x4e,0xf0,0x90,0x00,0x80,0xe0,0x44,0x80,
++0xfd,0x7f,0x80,0x02,0x4b,0xee,0x90,0x00,0xf3,0xe0,0x30,0xe2,0x0d,0x90,0x05,0x41,
++0x74,0x10,0xf0,0x90,0x05,0x5a,0xf0,0xa3,0xe4,0xf0,0x22,0x12,0x24,0x62,0x60,0x02,
++0x80,0x01,0xe4,0x90,0x91,0x31,0xf0,0x90,0x91,0x31,0xe0,0x90,0x01,0xe7,0xf0,0x22,
++0x90,0x91,0x51,0xe0,0xb4,0x01,0x0c,0x90,0x00,0xf2,0xe0,0x30,0xe7,0x05,0x7e,0xfd,
++0x7f,0x33,0x22,0x7e,0xfd,0x7f,0x2f,0x22,0x12,0x24,0x62,0xff,0x54,0x01,0xfe,0x90,
++0x91,0x53,0xe0,0x54,0xfe,0x4e,0xf0,0xef,0xc3,0x13,0x30,0xe0,0x0a,0x90,0x00,0x01,
++0x12,0x42,0x20,0x90,0x91,0x54,0xf0,0x22,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x90,
++0xf7,0xf0,0xe0,0x60,0x04,0xe0,0xf4,0x70,0x21,0xa2,0xaf,0xe4,0x33,0xf5,0x0e,0xc2,
++0xaf,0x90,0x00,0x47,0xe0,0x54,0xfb,0xfd,0x7f,0x47,0x12,0x4b,0xee,0x7d,0x40,0x7f,
++0x01,0x12,0x31,0x66,0xe5,0x0e,0x24,0xff,0x92,0xaf,0x22,0xc0,0xe0,0xc0,0xf0,0xc0,
++0x83,0xc0,0x82,0xc0,0xd0,0x75,0xd0,0x00,0xc0,0x00,0xc0,0x01,0xc0,0x02,0xc0,0x03,
++0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0x90,0x01,0xc4,0x74,0xcb,0xf0,0x74,0x57,
++0xa3,0xf0,0x90,0x01,0x34,0xe0,0x55,0x28,0xf5,0x2c,0x90,0x01,0x36,0xe0,0x55,0x2a,
++0xf5,0x2e,0xa3,0xe0,0x55,0x2b,0xf5,0x2f,0xe5,0x2c,0x30,0xe0,0x5a,0x90,0x01,0x34,
++0x74,0x01,0xf0,0x85,0xd9,0x54,0xe5,0x70,0x14,0x24,0xfd,0x50,0x02,0x80,0x48,0x90,
++0x91,0x3b,0xe0,0x60,0x3a,0x90,0x01,0x5b,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x04,0xf0,
++0x51,0x30,0xef,0x64,0x01,0x70,0x30,0x90,0x91,0x66,0xf0,0x90,0x91,0x2d,0xe0,0x90,
++0x91,0x67,0xf0,0xe4,0xfb,0xfd,0x7f,0x58,0x7e,0x01,0x12,0x44,0x59,0x90,0x01,0x5b,
++0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x01,0xf0,0x90,0x91,0x37,0xf0,0x80,0x08,0x51,
++0x30,0xbf,0x01,0x03,0x12,0x44,0xc2,0xe5,0x2c,0x30,0xe1,0x20,0x90,0x01,0x34,0x74,
++0x02,0xf0,0x85,0xd1,0x58,0x85,0xd2,0x59,0x85,0xd3,0x5a,0x85,0xd4,0x5b,0x85,0xd5,
++0x5c,0x85,0xd6,0x5d,0x85,0xd7,0x5e,0x85,0xd9,0x5f,0x71,0x5c,0xe5,0x2c,0x30,0xe3,
++0x10,0x90,0x01,0x34,0x74,0x08,0xf0,0x90,0x91,0x56,0xe0,0x30,0xe0,0x03,0x43,0x57,
++0x04,0xe5,0x2c,0x30,0xe4,0x09,0x90,0x01,0x34,0x74,0x10,0xf0,0x43,0x57,0x10,0xe5,
++0x2c,0x30,0xe5,0x26,0x90,0x01,0xcf,0xe0,0x30,0xe5,0x1f,0xe0,0x54,0xdf,0xf0,0x90,
++0x01,0x34,0x74,0x20,0xf0,0x75,0xa8,0x00,0x75,0xe8,0x00,0x12,0x4e,0xe4,0x90,0x00,
++0x03,0xe0,0x54,0xfb,0xf0,0x12,0x4a,0xe6,0x80,0xfe,0xe5,0x2c,0x30,0xe6,0x06,0x90,
++0x01,0x34,0x74,0x40,0xf0,0xe5,0x2e,0x30,0xe0,0x13,0x90,0x91,0x50,0x74,0x01,0xf0,
++0x90,0x01,0x36,0xf0,0x91,0x23,0x51,0x87,0x90,0x91,0x50,0xe4,0xf0,0xe5,0x2e,0x30,
++0xe1,0x3c,0x90,0x01,0x36,0x74,0x02,0xf0,0x43,0x57,0x40,0x90,0x01,0x02,0xe0,0x54,
++0x03,0x64,0x01,0x70,0x29,0x90,0x01,0x37,0xe0,0x30,0xe0,0x0a,0x74,0x01,0xf0,0x90,
++0x91,0x40,0xe4,0xf0,0x80,0x18,0x90,0x91,0x40,0xe0,0x04,0xf0,0xe0,0xc3,0x94,0x0a,
++0x40,0x0c,0xe4,0xf0,0x90,0x04,0x19,0xe0,0x30,0xe0,0x03,0x12,0x4f,0xf5,0xe5,0x2e,
++0x30,0xe2,0x19,0x90,0x01,0x36,0x74,0x04,0xf0,0x90,0x91,0x3a,0xe4,0xf0,0x90,0x05,
++0x58,0x74,0x03,0xf0,0x51,0xd8,0x90,0x91,0x3f,0xe0,0x04,0xf0,0xe5,0x2e,0x30,0xe3,
++0x28,0x90,0x01,0x36,0x74,0x08,0xf0,0xe5,0x6d,0x64,0x01,0x70,0x1c,0xe5,0x70,0x60,
++0x18,0x90,0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x90,0x91,0x66,0xe4,
++0x12,0x44,0x49,0x90,0x01,0x57,0x74,0x05,0xf0,0xe5,0x2e,0x30,0xe4,0x2b,0x90,0x01,
++0x36,0x74,0x10,0xf0,0xe5,0x6d,0xb4,0x01,0x20,0xe5,0x70,0x60,0x1c,0x90,0x01,0x57,
++0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x90,0x91,0x3c,0xe4,0xf0,0x53,0x71,0xfd,
++0xe5,0x71,0x54,0x07,0x70,0x03,0x12,0x44,0xc2,0xe5,0x2e,0x30,0xe5,0x1f,0x90,0x01,
++0x36,0x74,0x20,0xf0,0xe5,0x6d,0xb4,0x01,0x14,0xe5,0x70,0x60,0x10,0x90,0x91,0x3b,
++0xe0,0x64,0x02,0x60,0x05,0x12,0x44,0xc8,0x80,0x03,0x12,0x44,0x77,0xe5,0x2e,0x30,
++0xe6,0x1b,0x90,0x01,0x36,0x74,0x40,0xf0,0xe5,0x6d,0xb4,0x01,0x10,0xe5,0x70,0x60,
++0x0c,0x53,0x71,0xfe,0xe5,0x71,0x54,0x07,0x70,0x03,0x12,0x44,0xc2,0xe5,0x2f,0x30,
++0xe1,0x08,0x90,0x01,0x37,0x74,0x02,0xf0,0x71,0x7e,0x74,0xcb,0x04,0x90,0x01,0xc4,
++0xf0,0x74,0x57,0xa3,0xf0,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04,0xd0,0x03,0xd0,
++0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,0xd0,0x82,0xd0,0x83,0xd0,0xf0,0xd0,0xe0,0x32,
++0x90,0x04,0x1b,0xe0,0x54,0x7f,0x64,0x7f,0x7f,0x01,0x60,0x02,0x7f,0x00,0x22,0x51,
++0x30,0xef,0x64,0x01,0x60,0x08,0x90,0x01,0xb9,0x74,0x01,0xf0,0x80,0x30,0x90,0x91,
++0x37,0xe0,0x60,0x08,0x90,0x01,0xb9,0x74,0x02,0xf0,0x80,0x22,0x90,0x91,0x36,0xe0,
++0x60,0x08,0x90,0x01,0xb9,0x74,0x04,0xf0,0x80,0x14,0xe5,0x6f,0x54,0x0f,0xd3,0x94,
++0x04,0x40,0x08,0x90,0x01,0xb9,0x74,0x08,0xf0,0x80,0x03,0x7f,0x01,0x22,0x90,0x01,
++0xb8,0x74,0x08,0xf0,0x7f,0x00,0x22,0x90,0x91,0x53,0xe0,0x30,0xe0,0x49,0xe5,0x6d,
++0x64,0x01,0x70,0x43,0x90,0x91,0x52,0xe0,0x04,0xf0,0xe5,0x70,0x64,0x03,0x60,0x05,
++0xe5,0x70,0xb4,0x06,0x0d,0x90,0x91,0x52,0xe0,0xff,0x74,0x01,0xd3,0x9f,0x50,0x14,
++0x80,0x07,0x90,0x91,0x52,0xe0,0xb4,0x0a,0x0b,0x90,0x91,0x55,0xe0,0x04,0xf0,0xe4,
++0x90,0x91,0x52,0xf0,0x90,0x91,0x55,0xe0,0xff,0x90,0x91,0x54,0xe0,0xb5,0x07,0x07,
++0x71,0x4e,0xe4,0x90,0x91,0x55,0xf0,0x22,0xe5,0x6d,0x64,0x01,0x70,0x63,0xe5,0x70,
++0x60,0x5f,0xe5,0x70,0x64,0x02,0x60,0x06,0xe5,0x70,0x64,0x05,0x70,0x27,0x90,0x06,
++0xab,0xe0,0x90,0x91,0x27,0xf0,0x90,0x06,0xaa,0xe0,0x90,0x91,0x39,0xf0,0x90,0x91,
++0x27,0xe0,0x70,0x07,0x90,0x91,0x39,0xe0,0xff,0x80,0x05,0x90,0x91,0x27,0xe0,0xff,
++0x90,0x91,0x27,0xef,0xf0,0x90,0x91,0x29,0xe0,0x60,0x03,0xe0,0x14,0xf0,0xe4,0x90,
++0x91,0x28,0xf0,0x90,0x01,0x57,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x53,0x71,0xfd,
++0x53,0x71,0xef,0xe5,0x70,0x14,0x24,0xfd,0x50,0x02,0x80,0x03,0x12,0x45,0xc7,0x71,
++0x42,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0xd0,0xd0,0x92,0xaf,0x22,0xe5,0x6e,
++0x30,0xe3,0x04,0xe4,0xff,0x80,0x02,0x7f,0x01,0x02,0x47,0xc9,0x90,0x91,0x08,0xe0,
++0x54,0xf0,0x44,0x03,0xf0,0x54,0x0f,0x44,0x80,0xf0,0x7b,0x00,0x7a,0x00,0x79,0x58,
++0x90,0x91,0x71,0x12,0x43,0x41,0x0b,0x7a,0x91,0x79,0x08,0x02,0x46,0xb7,0x90,0x91,
++0x80,0x12,0x25,0x14,0x00,0x00,0x00,0x00,0xe5,0x70,0x14,0x24,0xfd,0x50,0x02,0x80,
++0x21,0x90,0x91,0x3b,0xe0,0x60,0x06,0x7d,0x01,0x7f,0x0c,0x80,0x0d,0xe5,0x6e,0x54,
++0x0f,0xc3,0x94,0x04,0x50,0x07,0x7d,0x01,0x7f,0x04,0x12,0x47,0x27,0xe4,0xff,0x12,
++0x48,0xb3,0x22,0x51,0x30,0xef,0x64,0x01,0x60,0x08,0x90,0x01,0xb9,0x74,0x01,0xf0,
++0x80,0x58,0xe5,0x71,0x54,0x03,0x60,0x08,0x90,0x01,0xb9,0x74,0x02,0xf0,0x80,0x4a,
++0xe5,0x6f,0x54,0x0f,0xd3,0x94,0x02,0x40,0x08,0x90,0x01,0xb9,0x74,0x04,0xf0,0x80,
++0x39,0xe5,0x71,0x30,0xe2,0x08,0x90,0x01,0xb9,0x74,0x08,0xf0,0x80,0x2c,0xe5,0x71,
++0x30,0xe4,0x08,0x90,0x01,0xb9,0x74,0x10,0xf0,0x80,0x1f,0x90,0x91,0x29,0xe0,0x60,
++0x08,0x90,0x01,0xb9,0x74,0x20,0xf0,0x80,0x11,0x90,0x91,0x31,0xe0,0x60,0x08,0x90,
++0x01,0xb9,0x74,0x80,0xf0,0x80,0x03,0x7f,0x01,0x22,0x90,0x01,0xb8,0x74,0x04,0xf0,
++0x7f,0x00,0x22,0xe4,0xfb,0x90,0x91,0x78,0x12,0x25,0x14,0x00,0x00,0x00,0x00,0xe5,
++0x70,0x70,0x02,0x81,0xb5,0xe5,0x6d,0x64,0x01,0x70,0x7a,0xe5,0x70,0x14,0x60,0x2b,
++0x24,0xfd,0x60,0x27,0x24,0x02,0x24,0xfb,0x50,0x02,0x80,0x21,0x90,0x91,0x27,0xe0,
++0x14,0xf0,0xe0,0x60,0x04,0xa3,0xe0,0x60,0x14,0x90,0x91,0x27,0xe0,0x70,0x08,0x90,
++0x91,0x39,0xe0,0x90,0x91,0x27,0xf0,0x7b,0x01,0x80,0x02,0x7b,0x01,0xeb,0x60,0x45,
++0x43,0x71,0x10,0xe4,0x90,0x91,0x66,0xf0,0x90,0x91,0x3a,0xe0,0x75,0xf0,0x05,0xa4,
++0xff,0x90,0x91,0x34,0xe0,0x2f,0x12,0x44,0x4e,0x90,0x01,0x57,0x74,0x05,0xf0,0xe5,
++0x6e,0x54,0x0f,0xc3,0x94,0x04,0x50,0x07,0x7d,0x01,0x7f,0x04,0x12,0x47,0x27,0x90,
++0x91,0x2e,0xe0,0x60,0x10,0x90,0x91,0x2c,0xe0,0x90,0x07,0x78,0x60,0x04,0x74,0x0d,
++0xf0,0x22,0x74,0x09,0xf0,0x22,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0,0x82,0xc0,0xd0,
++0x75,0xd0,0x00,0xc0,0x00,0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0xc0,
++0x06,0xc0,0x07,0x90,0x01,0xc4,0x74,0xb6,0xf0,0x74,0x5c,0xa3,0xf0,0x53,0x91,0xef,
++0x90,0x00,0x51,0xe0,0xff,0x90,0x00,0x55,0xe0,0x5f,0xf5,0x3d,0x90,0x00,0x52,0xe0,
++0xff,0x90,0x00,0x56,0xe0,0x5f,0xf5,0x3e,0xe5,0x3d,0x30,0xe4,0x06,0x90,0x00,0x55,
++0x74,0x10,0xf0,0xe5,0x3d,0x30,0xe5,0x06,0x90,0x00,0x55,0x74,0x20,0xf0,0xe5,0x3d,
++0x30,0xe6,0x1b,0x90,0x00,0x55,0x74,0x40,0xf0,0x90,0x90,0xf6,0xe0,0x54,0x03,0xff,
++0xbf,0x03,0x0b,0x90,0x90,0xf3,0xe0,0x60,0x05,0x7f,0x01,0x12,0x4c,0x03,0xe5,0x3d,
++0x30,0xe7,0x15,0x90,0x00,0x55,0x74,0x80,0xf0,0x90,0x90,0xf6,0xe0,0x54,0x03,0xff,
++0xbf,0x03,0x05,0x7f,0x02,0x12,0x4c,0x03,0xe5,0x3e,0x30,0xe0,0x06,0x90,0x00,0x56,
++0x74,0x01,0xf0,0xe5,0x3e,0x30,0xe1,0x06,0x90,0x00,0x56,0x74,0x02,0xf0,0xe5,0x3e,
++0x30,0xe2,0x06,0x90,0x00,0x56,0x74,0x04,0xf0,0xe5,0x3e,0x30,0xe3,0x06,0x90,0x00,
++0x56,0x74,0x08,0xf0,0x90,0x01,0xc4,0x74,0xb6,0xf0,0x74,0x5c,0xa3,0xf0,0xd0,0x07,
++0xd0,0x06,0xd0,0x05,0xd0,0x04,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,
++0xd0,0x82,0xd0,0x83,0xd0,0xf0,0xd0,0xe0,0x32,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0,
++0x82,0xc0,0xd0,0x75,0xd0,0x00,0xc0,0x00,0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04,
++0xc0,0x05,0xc0,0x06,0xc0,0x07,0x75,0x0d,0x00,0x90,0x01,0xc4,0x74,0x99,0xf0,0x74,
++0x5d,0xa3,0xf0,0x53,0x91,0xdf,0x90,0x01,0x3c,0xe0,0x55,0x30,0xf5,0x34,0xa3,0xe0,
++0x55,0x31,0xf5,0x35,0xa3,0xe0,0x55,0x32,0xf5,0x36,0xa3,0xe0,0x55,0x33,0xf5,0x37,
++0xe5,0x34,0x30,0xe0,0x06,0x90,0x01,0x3c,0x74,0x01,0xf0,0xe5,0x34,0x30,0xe1,0x08,
++0x90,0x01,0x3c,0x74,0x02,0xf0,0xf1,0x57,0xe5,0x34,0x30,0xe2,0x3a,0x90,0x01,0x3c,
++0x74,0x04,0xf0,0x90,0x06,0x92,0xe0,0x30,0xe0,0x25,0x90,0x91,0x66,0xe4,0xf0,0x90,
++0x91,0x2d,0xe0,0x90,0x91,0x67,0xf0,0xe4,0xfb,0xfd,0x7f,0x58,0x7e,0x01,0x12,0x44,
++0x59,0x90,0x01,0x5b,0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x01,0xf0,0x80,0x08,0x90,
++0x91,0x37,0xe4,0xf0,0x12,0x44,0xc2,0xe5,0x34,0x30,0xe3,0x3a,0x90,0x01,0x3c,0x74,
++0x08,0xf0,0x90,0x06,0x92,0xe0,0x30,0xe1,0x25,0x90,0x91,0x66,0xe4,0xf0,0x90,0x91,
++0x2d,0xe0,0x90,0x91,0x67,0xf0,0xe4,0xfb,0xfd,0x7f,0x5c,0x7e,0x01,0x12,0x44,0x59,
++0x90,0x01,0x5f,0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x02,0xf0,0x80,0x08,0x90,0x91,
++0x36,0xe4,0xf0,0x12,0x44,0xc2,0xe5,0x34,0x30,0xe4,0x09,0x90,0x01,0x3c,0x74,0x10,
++0xf0,0x12,0x53,0x86,0xe5,0x34,0x30,0xe5,0x09,0x90,0x01,0x3c,0x74,0x20,0xf0,0x12,
++0x6e,0xb9,0xe5,0x35,0x30,0xe0,0x5a,0x90,0x01,0x3d,0x74,0x01,0xf0,0x90,0x01,0x2f,
++0xe0,0x44,0x7f,0xf0,0x90,0x00,0x83,0xe0,0x54,0x0f,0xf5,0x0d,0xb4,0x01,0x02,0x80,
++0x1c,0xe5,0x0d,0xb4,0x02,0x05,0x90,0x00,0x83,0x80,0x12,0xe5,0x0d,0xb4,0x04,0x05,
++0x90,0x00,0x83,0x80,0x08,0xe5,0x0d,0xb4,0x0c,0x08,0x90,0x00,0x83,0xe0,0xf5,0x6f,
++0x80,0x06,0x90,0x01,0xbe,0xe0,0x04,0xf0,0x90,0x01,0xbb,0xe5,0x6f,0xf0,0xe5,0x6f,
++0x30,0xe0,0x03,0xa3,0x80,0x03,0x90,0x01,0xbd,0xe0,0x04,0xf0,0xf1,0x38,0x12,0x44,
++0xc2,0xe5,0x35,0x30,0xe2,0x06,0x90,0x01,0x3d,0x74,0x04,0xf0,0xe5,0x36,0x30,0xe0,
++0x06,0x90,0x01,0x3e,0x74,0x01,0xf0,0xe5,0x36,0x30,0xe1,0x06,0x90,0x01,0x3e,0x74,
++0x02,0xf0,0x74,0x99,0x04,0x90,0x01,0xc4,0xf0,0x74,0x5d,0xa3,0xf0,0xd0,0x07,0xd0,
++0x06,0xd0,0x05,0xd0,0x04,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,0xd0,
++0x82,0xd0,0x83,0xd0,0xf0,0xd0,0xe0,0x32,0xe5,0x6f,0x30,0xe6,0x19,0xe5,0x6f,0x54,
++0x0f,0xff,0x90,0x91,0x24,0xe0,0xfe,0x4f,0x90,0x01,0x2f,0xf0,0xee,0x64,0x80,0x90,
++0x91,0x24,0xf0,0x53,0x6f,0xbf,0x22,0xe4,0x90,0x91,0x0d,0xf0,0xe5,0x70,0x70,0x02,
++0xe1,0xe1,0x90,0x91,0x3c,0xe0,0x60,0x0d,0xe4,0xf0,0x53,0x71,0xfd,0xe5,0x71,0x54,
++0x07,0x70,0x6e,0x80,0x69,0x90,0x91,0x28,0xe0,0x04,0xf0,0x53,0x71,0xef,0x90,0x91,
++0x3a,0xe0,0x04,0xf0,0x90,0x91,0x0d,0xe0,0xf9,0xff,0x7e,0x00,0x24,0x01,0xfd,0xee,
++0x33,0xfc,0x90,0x91,0x3a,0xe0,0xb5,0x05,0x06,0xe4,0xb5,0x04,0x02,0x80,0x12,0xef,
++0x24,0x02,0xff,0xe4,0x3e,0xfe,0x90,0x91,0x3a,0xe0,0xb5,0x07,0x0a,0xe4,0xb5,0x06,
++0x06,0x90,0x05,0x58,0xe0,0x04,0xf0,0xe9,0xff,0x90,0x91,0x2f,0xe0,0x2f,0xff,0xe4,
++0x33,0xfe,0x90,0x91,0x28,0xe0,0xd3,0x9f,0xee,0x64,0x80,0xf8,0x74,0x80,0x98,0x40,
++0x0d,0xe5,0x6d,0xb4,0x01,0x0b,0xa3,0xe0,0x70,0x07,0xe0,0x04,0xf0,0x22,0x12,0x44,
++0xc2,0x22,0x8f,0x20,0x8c,0x21,0x8d,0x22,0x22,0x8f,0x23,0x8c,0x24,0x8d,0x25,0x22,
++0xe4,0x90,0x91,0x11,0xf0,0xa3,0xf0,0x90,0x02,0x86,0xe0,0x20,0xe1,0x2c,0xc3,0x90,
++0x91,0x12,0xe0,0x94,0x20,0x90,0x91,0x11,0xe0,0x94,0x03,0x40,0x0a,0x90,0x01,0xc6,
++0xe0,0x44,0x20,0xf0,0x7f,0x00,0x22,0x90,0x91,0x11,0xe4,0x75,0xf0,0x01,0x12,0x42,
++0x81,0x7f,0x01,0x7e,0x00,0x12,0x32,0x15,0x80,0xcd,0x7f,0x01,0x22,0x90,0x01,0xcc,
++0xe0,0x54,0x0f,0x90,0x91,0x11,0xf0,0x90,0x91,0x11,0xe0,0xfd,0x70,0x02,0x21,0x6f,
++0x90,0x91,0x9c,0xe0,0xff,0x74,0x01,0x7e,0x00,0xa8,0x07,0x08,0x80,0x05,0xc3,0x33,
++0xce,0x33,0xce,0xd8,0xf9,0xff,0xef,0x5d,0x70,0x02,0x21,0x68,0x90,0x91,0x9c,0xe0,
++0x75,0xf0,0x04,0x90,0x01,0xd0,0x12,0x43,0x15,0xe0,0x90,0x91,0x12,0xf0,0x75,0x63,
++0x01,0x75,0x64,0x91,0x75,0x65,0x12,0x75,0x66,0x01,0x7b,0x01,0x7a,0x91,0x79,0x13,
++0x12,0x46,0x6d,0x90,0x91,0x13,0xe0,0xff,0xc4,0x13,0x13,0x13,0x54,0x01,0x90,0x91,
++0x9c,0x30,0xe0,0x59,0xe0,0x75,0xf0,0x02,0x90,0x00,0x88,0x12,0x43,0x15,0xe0,0x90,
++0x91,0x14,0xf0,0x90,0x91,0x9c,0xe0,0x75,0xf0,0x02,0x90,0x00,0x89,0x12,0x43,0x15,
++0xe0,0x90,0x91,0x15,0xf0,0x90,0x91,0x9c,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd1,0x12,
++0x43,0x15,0xe0,0x90,0x91,0x16,0xf0,0x90,0x91,0x9c,0xe0,0x75,0xf0,0x04,0x90,0x01,
++0xd2,0x12,0x43,0x15,0xe0,0x90,0x91,0x17,0xf0,0x90,0x91,0x9c,0xe0,0x75,0xf0,0x04,
++0x90,0x01,0xd3,0x12,0x43,0x15,0xe0,0x90,0x91,0x18,0xf0,0x80,0x33,0xe0,0x75,0xf0,
++0x04,0x90,0x01,0xd1,0x12,0x43,0x15,0xe0,0x90,0x91,0x14,0xf0,0x90,0x91,0x9c,0xe0,
++0x75,0xf0,0x04,0x90,0x01,0xd2,0x12,0x43,0x15,0xe0,0x90,0x91,0x15,0xf0,0x90,0x91,
++0x9c,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd3,0x12,0x43,0x15,0xe0,0x90,0x91,0x16,0xf0,
++0xef,0x54,0x7f,0xff,0x7b,0x01,0x7a,0x91,0x79,0x14,0x12,0x51,0xf8,0x90,0x91,0x11,
++0xe0,0xff,0x90,0x91,0x9c,0xe0,0xfe,0x74,0x01,0xa8,0x06,0x08,0x80,0x02,0xc3,0x33,
++0xd8,0xfc,0xf4,0x5f,0x90,0x91,0x11,0xf0,0x90,0x91,0x9c,0xe0,0xff,0x74,0x01,0xa8,
++0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0x90,0x01,0xcc,0xf0,0x90,0x91,0x9c,0xe0,
++0x04,0xf0,0xe0,0x54,0x03,0xf0,0x01,0x37,0x90,0x01,0xc6,0xe0,0x44,0x02,0xf0,0x22,
++0xad,0x07,0x74,0x11,0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x01,0xf0,
++0x90,0x04,0x80,0xe0,0x54,0x0f,0xfc,0x74,0x14,0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,
++0x83,0xe0,0x54,0xc0,0x4c,0xfd,0x74,0x14,0x2f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,
++0xed,0xf0,0x22,0xef,0x60,0x0f,0x74,0x21,0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,
++0xe0,0x44,0x10,0xf0,0x22,0x74,0x21,0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,
++0x54,0xef,0xf0,0x22,0xe4,0xf5,0x6d,0xf5,0x71,0xf5,0x70,0x75,0x6f,0x0c,0x75,0x6e,
++0x0c,0x90,0x91,0x3b,0xf0,0x90,0x91,0x37,0xf0,0x90,0x91,0x36,0xf0,0x90,0x91,0x39,
++0x04,0xf0,0x90,0x91,0x27,0xf0,0xe4,0x90,0x91,0x3c,0xf0,0x90,0x91,0x29,0xf0,0x90,
++0x91,0x34,0x74,0x07,0xf0,0xe4,0x90,0x91,0x28,0xf0,0x90,0x91,0x32,0xf0,0xa3,0x74,
++0x03,0xf0,0x90,0x91,0x2f,0x74,0x0a,0xf0,0xa3,0x74,0x05,0xf0,0x90,0x91,0x2d,0x74,
++0x14,0xf0,0x90,0x91,0x35,0x74,0x05,0xf0,0xe4,0x90,0x91,0x2b,0xf0,0x90,0x91,0x25,
++0xf0,0x90,0x91,0x50,0xf0,0x90,0x91,0x31,0xf0,0x90,0x91,0x3a,0xf0,0x90,0x91,0x26,
++0xf0,0x90,0x91,0x38,0xf0,0x90,0x91,0x2e,0xf0,0x90,0x91,0x2c,0xf0,0x22,0xe4,0x90,
++0x91,0x3c,0xf0,0x90,0x91,0x28,0xf0,0xf5,0x71,0x22,0x90,0x06,0x04,0xe0,0x54,0xbf,
++0xf0,0xef,0x60,0x0a,0xe5,0x6d,0xb4,0x01,0x05,0xe4,0xff,0x12,0x47,0xc9,0x53,0x6e,
++0xf0,0x43,0x6e,0x0c,0x22,0x90,0x91,0x9d,0xef,0xf0,0x51,0x7e,0x90,0x91,0x9d,0xe0,
++0x60,0x05,0x90,0x05,0x22,0xe4,0xf0,0x53,0x6e,0xf0,0x43,0x6e,0x04,0x22,0x90,0x00,
++0x11,0xe0,0x44,0x09,0xf0,0x12,0x4a,0xe6,0x90,0x90,0xd8,0x12,0x43,0x09,0x90,0x80,
++0x96,0x12,0x25,0x08,0x7f,0x78,0x7e,0x08,0x12,0x2b,0x08,0x90,0x90,0xdc,0x12,0x43,
++0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x04,0x7e,0x0c,0x12,0x2b,0x08,0x90,0x90,
++0xe0,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x00,0x7e,0x08,0x12,0x2b,
++0x08,0x90,0x90,0xe4,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x70,0x7e,
++0x0e,0x12,0x2b,0x08,0x90,0x80,0x68,0x12,0x25,0x14,0x00,0x03,0x2d,0x95,0xe4,0xfd,
++0xff,0x12,0x30,0x2c,0x90,0x91,0x51,0xe0,0xb4,0x01,0x11,0x90,0x80,0x68,0x12,0x25,
++0x14,0x00,0x03,0x2d,0x95,0xe4,0xfd,0x7f,0x01,0x12,0x30,0x2c,0x22,0x8f,0x77,0xe4,
++0x90,0x91,0x96,0xf0,0xa3,0xf0,0x90,0x01,0x09,0xe0,0x7f,0x00,0x30,0xe7,0x02,0x7f,
++0x01,0xef,0x65,0x77,0x60,0x3e,0xc3,0x90,0x91,0x97,0xe0,0x94,0x88,0x90,0x91,0x96,
++0xe0,0x94,0x13,0x40,0x08,0x90,0x01,0xc6,0xe0,0x44,0x80,0xf0,0x22,0x90,0x91,0x96,
++0xe4,0x75,0xf0,0x01,0x12,0x42,0x81,0x7f,0x14,0x7e,0x00,0x12,0x32,0x15,0xd3,0x90,
++0x91,0x97,0xe0,0x94,0x32,0x90,0x91,0x96,0xe0,0x94,0x00,0x40,0xb9,0x90,0x01,0xc7,
++0xe0,0x30,0xe0,0xb2,0x22,0x22,0x53,0x6e,0xf0,0x43,0x6e,0x01,0x71,0x55,0x71,0x67,
++0x53,0x6e,0xf0,0x43,0x6e,0x02,0x22,0x22,0x8f,0x78,0x12,0x47,0xe6,0xef,0x64,0x01,
++0x70,0x2e,0x90,0x91,0x44,0x12,0x48,0x1e,0xe5,0x78,0x60,0x10,0x74,0x21,0x2f,0xf5,
++0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x10,0xf0,0x80,0x0e,0x74,0x21,0x2f,0xf5,
++0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xef,0xf0,0x90,0x04,0x1f,0x74,0x20,0xf0,
++0x22,0xe4,0xfb,0x90,0x91,0x7c,0x12,0x25,0x14,0x00,0x00,0x00,0x00,0xe5,0x70,0x60,
++0x5f,0xe5,0x6d,0x64,0x01,0x70,0x59,0x0b,0x90,0x91,0x27,0xf0,0x04,0x60,0x51,0x43,
++0x71,0x10,0xe4,0x90,0x91,0x66,0xf0,0x90,0x91,0x3a,0xe0,0x75,0xf0,0x05,0xa4,0xff,
++0x90,0x91,0x34,0xe0,0x2f,0x90,0x91,0x67,0xf0,0xe4,0x1b,0x12,0x44,0x54,0x90,0x01,
++0x57,0x74,0x05,0xf0,0xe5,0x6e,0x54,0x0f,0xc3,0x94,0x04,0x50,0x07,0x7d,0x01,0x7f,
++0x04,0x12,0x47,0x27,0x90,0x91,0x2e,0xe0,0x60,0x11,0x90,0x91,0x2c,0xe0,0x90,0x07,
++0x78,0x60,0x05,0x74,0x0d,0xf0,0x80,0x03,0x74,0x09,0xf0,0x90,0x05,0x22,0xe4,0xf0,
++0x22,0x90,0x91,0x32,0xe0,0xa3,0xe0,0x90,0x05,0x58,0xf0,0x22,0xd3,0x10,0xaf,0x01,
++0xc3,0xc0,0xd0,0x90,0x91,0x84,0xee,0xf0,0xa3,0xef,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,
++0x90,0x91,0x84,0xe0,0xfe,0xa3,0xe0,0xf5,0x82,0x8e,0x83,0xe0,0x60,0x2d,0xc3,0x90,
++0x91,0x87,0xe0,0x94,0xe8,0x90,0x91,0x86,0xe0,0x94,0x03,0x40,0x0b,0x90,0x01,0xc6,
++0xe0,0x44,0x10,0xf0,0x7f,0x00,0x80,0x15,0x90,0x91,0x86,0xe4,0x75,0xf0,0x01,0x12,
++0x42,0x81,0x7f,0x0a,0x7e,0x00,0x12,0x32,0x15,0x80,0xc5,0x7f,0x01,0xd0,0xd0,0x92,
++0xaf,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,0x1c,0x12,0x43,0x41,0x90,
++0x91,0x1f,0x12,0x25,0x14,0x00,0x00,0x00,0x00,0x90,0x91,0x1c,0x12,0x43,0x21,0x90,
++0x00,0x01,0x12,0x42,0x20,0x90,0x91,0x3b,0xf0,0x90,0x00,0x03,0x12,0x42,0x20,0x90,
++0x91,0x25,0xf0,0x90,0x00,0x04,0x12,0x42,0x20,0xff,0x54,0x01,0x90,0x91,0x26,0xf0,
++0xef,0xc3,0x13,0x54,0x01,0x90,0x91,0x2e,0xf0,0x90,0x00,0x04,0x12,0x42,0x20,0xff,
++0x13,0x13,0x54,0x01,0x90,0x91,0x2c,0xf0,0x90,0x91,0x2e,0xe0,0x90,0x91,0x1f,0x70,
++0x26,0x12,0x25,0x14,0x00,0x00,0x02,0x10,0x90,0x91,0x1f,0x12,0x43,0x09,0x90,0x80,
++0x96,0x12,0x25,0x08,0x7f,0x60,0x7e,0x08,0x12,0x2b,0x08,0x90,0x91,0x1f,0x12,0x25,
++0x14,0x00,0x00,0x03,0x10,0x80,0x24,0x12,0x25,0x14,0x00,0x00,0x01,0x10,0x90,0x91,
++0x1f,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x60,0x7e,0x08,0x12,0x2b,
++0x08,0x90,0x91,0x1f,0x12,0x25,0x14,0x00,0x00,0x03,0x00,0x90,0x91,0x1f,0x12,0x43,
++0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x70,0x7e,0x08,0x12,0x2b,0x08,0x90,0x91,
++0x26,0xe0,0x70,0x3d,0x90,0x91,0x38,0x74,0x01,0xf0,0x7f,0x00,0x7e,0x08,0x12,0x22,
++0x65,0x90,0x91,0x1f,0x12,0x25,0x08,0x90,0x91,0x1f,0x12,0x43,0x09,0xec,0x44,0x02,
++0xfc,0x90,0x91,0x1f,0x12,0x25,0x08,0x90,0x91,0x1f,0x12,0x43,0x09,0x90,0x80,0x96,
++0x12,0x25,0x08,0x7f,0x00,0x7e,0x08,0x12,0x2b,0x08,0x90,0x02,0x86,0xe0,0x54,0xfb,
++0xf0,0x90,0x91,0x1c,0x12,0x43,0x21,0x12,0x49,0x7f,0x90,0x01,0xe5,0xe5,0x70,0xf0,
++0x90,0x91,0x3b,0xe0,0x90,0x01,0xe6,0xf0,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x00,0x02,
++0x12,0x42,0x20,0xff,0x30,0xe0,0x25,0x12,0x24,0x62,0x90,0x91,0x2f,0xf0,0x90,0x00,
++0x01,0x12,0x42,0x20,0x90,0x91,0x30,0xf0,0xef,0xc3,0x13,0x54,0x7f,0x90,0x91,0x2d,
++0xf0,0x90,0x00,0x03,0x12,0x42,0x20,0x90,0x91,0x35,0xf0,0x22,0x90,0x91,0x2f,0x74,
++0x0a,0xf0,0x90,0x91,0x30,0x74,0x05,0xf0,0x90,0x91,0x2d,0x74,0x14,0xf0,0x90,0x91,
++0x35,0x74,0x05,0xf0,0x22,0x12,0x24,0x62,0x30,0xe0,0x19,0xc3,0x13,0x54,0x7f,0x90,
++0x91,0x34,0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0xff,0x90,0x91,0x32,0xe4,0xf0,0xa3,
++0xef,0xf0,0x80,0x0f,0x90,0x91,0x34,0x74,0x07,0xf0,0x90,0x91,0x32,0xe4,0xf0,0xa3,
++0x74,0x03,0xf0,0x90,0x91,0x32,0xe0,0xa3,0xe0,0x90,0x05,0x58,0xf0,0x22,0x90,0x02,
++0x09,0xe0,0xfd,0x12,0x24,0x62,0xfe,0xaf,0x05,0xed,0x2e,0x90,0x91,0x41,0xf0,0x90,
++0x00,0x01,0x12,0x42,0x20,0xff,0xed,0x2f,0x90,0x91,0x42,0xf0,0x90,0x00,0x02,0x12,
++0x42,0x20,0xff,0xed,0x2f,0x90,0x91,0x43,0xf0,0x90,0x00,0x03,0x12,0x42,0x20,0xff,
++0xed,0x2f,0x90,0x91,0x44,0xf0,0x90,0x00,0x04,0x12,0x42,0x20,0xff,0xae,0x05,0xed,
++0x2f,0x90,0x91,0x45,0xf0,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,0x47,
++0xe0,0x90,0x91,0x1d,0xf0,0x90,0x91,0x48,0xe0,0xf5,0x19,0xa3,0xe0,0xf5,0x1a,0xe4,
++0xf5,0x16,0x74,0x4a,0x25,0x16,0xf5,0x82,0xe4,0x34,0x91,0xf5,0x83,0xe0,0xff,0x74,
++0x1b,0x25,0x16,0xf8,0xa6,0x07,0x05,0x16,0xe5,0x16,0xb4,0x04,0xe5,0x90,0x91,0x1d,
++0xe0,0x12,0x43,0x4a,0x66,0xb3,0x00,0x67,0xdc,0x01,0x66,0xba,0x02,0x66,0xba,0x03,
++0x66,0xba,0x04,0x67,0xdc,0x05,0x67,0xac,0x80,0x67,0xc2,0x81,0x67,0xdc,0x82,0x00,
++0x00,0x67,0xd8,0xaf,0x1e,0x12,0x73,0xea,0xe1,0xdc,0x90,0x91,0x1d,0xe0,0xff,0xb4,
++0x02,0x08,0x90,0x91,0x1c,0x74,0x01,0xf0,0x80,0x0f,0xef,0x90,0x91,0x1c,0xb4,0x03,
++0x05,0x74,0x02,0xf0,0x80,0x03,0x74,0x04,0xf0,0xc3,0xe5,0x19,0x94,0x08,0x50,0x49,
++0xe4,0xf5,0x16,0x90,0x91,0x1c,0xe0,0xff,0xe5,0x16,0xc3,0x9f,0x40,0x02,0xe1,0xdc,
++0xc3,0xe5,0x19,0x94,0x01,0x50,0x14,0xe5,0x16,0x25,0x1a,0xff,0xc3,0x74,0x03,0x95,
++0x16,0x24,0x1b,0xf8,0xe6,0xfd,0x12,0x4b,0xee,0x80,0x1a,0xc3,0x74,0x03,0x95,0x16,
++0x24,0x1b,0xf8,0xe6,0xff,0xe5,0x16,0x7c,0x00,0x25,0x1a,0xfd,0xec,0x35,0x19,0x8d,
++0x82,0xf5,0x83,0xef,0xf0,0x05,0x16,0x80,0xba,0xc3,0xe5,0x19,0x94,0x10,0x40,0x02,
++0xe1,0xdc,0x90,0x91,0x1d,0xe0,0x64,0x04,0x60,0x02,0xe1,0xdc,0xaf,0x1c,0xfc,0xfd,
++0xfe,0x78,0x10,0x12,0x24,0xf5,0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0xaf,0x1b,
++0xe4,0xfc,0xfd,0xfe,0x78,0x18,0x12,0x24,0xf5,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,
++0x00,0x12,0x42,0xfc,0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0xaf,0x1d,0xe4,0xfc,
++0xfd,0xfe,0x78,0x08,0x12,0x24,0xf5,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0x12,
++0x42,0xfc,0xa8,0x04,0xa9,0x05,0xaa,0x06,0xab,0x07,0xaf,0x1e,0xe4,0xfc,0xfd,0xfe,
++0x12,0x42,0xfc,0xa3,0x12,0x25,0x08,0x90,0x91,0x1e,0x12,0x43,0x09,0x90,0x80,0x96,
++0x12,0x25,0x08,0xaf,0x1a,0xae,0x19,0x12,0x2b,0x08,0x80,0x30,0xe5,0x1d,0x7f,0x00,
++0xfe,0xef,0x25,0x1e,0xf5,0x18,0xe4,0x3e,0xf5,0x17,0xaf,0x18,0xfe,0x12,0x32,0x15,
++0x80,0x1a,0xe5,0x1d,0x7f,0x00,0xfe,0xef,0x25,0x1e,0xf5,0x18,0xe4,0x3e,0xf5,0x17,
++0xaf,0x18,0xfe,0x12,0x31,0x82,0x80,0x04,0x7f,0x00,0x80,0x02,0x7f,0x01,0xd0,0xd0,
++0x92,0xaf,0x22,0x22,0x8e,0x0e,0x8f,0x0f,0x8b,0x10,0x8a,0x11,0x89,0x12,0xe4,0x90,
++0x91,0x11,0xf0,0xef,0x90,0x00,0x31,0xf0,0x12,0x4a,0xe6,0xe5,0x0e,0x54,0x03,0xff,
++0x90,0x00,0x32,0xe0,0x54,0xfc,0x4f,0xf0,0x12,0x4a,0xe6,0x90,0x00,0x33,0xe0,0x54,
++0x7f,0xf0,0x12,0x4a,0xe6,0x90,0x00,0x33,0xe0,0x20,0xe7,0x0e,0x90,0x91,0x11,0xe0,
++0xc3,0x94,0x64,0x50,0x05,0xe0,0x04,0xf0,0x80,0xeb,0x90,0x91,0x11,0xe0,0xc3,0x94,
++0x64,0x50,0x10,0x90,0x00,0x30,0xe0,0xab,0x10,0xaa,0x11,0xa9,0x12,0x12,0x42,0x4d,
++0x7f,0x01,0x22,0x7f,0x00,0x22,0xe4,0x90,0x91,0x98,0xf0,0xa3,0xf0,0x90,0x05,0xf8,
++0xe0,0x70,0x0f,0xa3,0xe0,0x70,0x0b,0xa3,0xe0,0x70,0x07,0xa3,0xe0,0x70,0x03,0x7f,
++0x01,0x22,0xd3,0x90,0x91,0x99,0xe0,0x94,0xe8,0x90,0x91,0x98,0xe0,0x94,0x03,0x40,
++0x03,0x7f,0x00,0x22,0x7f,0x32,0x7e,0x00,0x12,0x32,0x15,0x90,0x91,0x98,0xe4,0x75,
++0xf0,0x01,0x12,0x42,0x81,0x80,0xc6,0xef,0x70,0x02,0x41,0x3d,0x90,0x90,0xe8,0xe0,
++0x60,0x02,0xc1,0x08,0x90,0x90,0xd4,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,
++0x7f,0x8c,0x7e,0x08,0x12,0x2b,0x08,0x90,0x90,0x80,0x12,0x43,0x09,0x90,0x80,0x96,
++0x12,0x25,0x08,0x7f,0x44,0x7e,0x08,0x12,0x2b,0x08,0x90,0x90,0x84,0x12,0x43,0x09,
++0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x5c,0x7e,0x08,0x12,0x2b,0x08,0x90,0x90,0x88,
++0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x6c,0x7e,0x0e,0x12,0x2b,0x08,
++0x90,0x90,0x8c,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x70,0x7e,0x0e,
++0x12,0x2b,0x08,0x90,0x90,0x90,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,
++0x74,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x90,0x94,0x12,0x43,0x09,0x90,0x80,0x96,0x12,
++0x25,0x08,0x7f,0x78,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x90,0x98,0x12,0x43,0x09,0x90,
++0x80,0x96,0x12,0x25,0x08,0x7f,0x7c,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x90,0x9c,0x12,
++0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x80,0x7e,0x0e,0x12,0x2b,0x08,0x90,
++0x90,0xa0,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x84,0x7e,0x0e,0x12,
++0x2b,0x08,0x90,0x90,0xa4,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x88,
++0x7e,0x0e,0x12,0x2b,0x08,0x90,0x90,0xa8,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,
++0x08,0x7f,0x8c,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x90,0xac,0x12,0x43,0x09,0x90,0x80,
++0x96,0x12,0x25,0x08,0x7f,0xd0,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x90,0xb0,0x12,0x43,
++0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0xd4,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x90,
++0xb4,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0xd8,0x7e,0x0e,0x12,0x2b,
++0x08,0x90,0x90,0xb8,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0xdc,0x7e,
++0x0e,0x12,0x2b,0x08,0x90,0x90,0xbc,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,
++0x7f,0xe0,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x90,0xc0,0x12,0x43,0x09,0x90,0x80,0x96,
++0x12,0x25,0x08,0x7f,0xec,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x90,0xc4,0x12,0x43,0x09,
++0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x04,0x7e,0x0c,0x12,0x2b,0x08,0x90,0x90,0xc8,
++0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x04,0x7e,0x0d,0x12,0x2b,0x08,
++0x90,0x90,0xcc,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x0c,0x7e,0x09,
++0x12,0x2b,0x08,0x90,0x90,0xd0,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,
++0x04,0x7e,0x08,0x12,0x2b,0x08,0x90,0x90,0xe8,0x74,0x01,0xf0,0x22,0x90,0x90,0xe8,
++0xe0,0x64,0x01,0x60,0x02,0xc1,0x08,0x7f,0x8c,0x7e,0x08,0x12,0x22,0x65,0x90,0x90,
++0xd4,0x12,0x25,0x08,0x7f,0x44,0x7e,0x08,0x12,0x22,0x65,0x90,0x90,0x80,0x12,0x25,
++0x08,0x7f,0x5c,0x7e,0x08,0x12,0x22,0x65,0x90,0x90,0x84,0x12,0x25,0x08,0x7f,0x6c,
++0x7e,0x0e,0x12,0x22,0x65,0x90,0x90,0x88,0x12,0x25,0x08,0x7f,0x70,0x7e,0x0e,0x12,
++0x22,0x65,0x90,0x90,0x8c,0x12,0x25,0x08,0x7f,0x74,0x7e,0x0e,0x12,0x22,0x65,0x90,
++0x90,0x90,0x12,0x25,0x08,0x7f,0x78,0x7e,0x0e,0x12,0x22,0x65,0x90,0x90,0x94,0x12,
++0x25,0x08,0x7f,0x7c,0x7e,0x0e,0x12,0x22,0x65,0x90,0x90,0x98,0x12,0x25,0x08,0x7f,
++0x80,0x7e,0x0e,0x12,0x22,0x65,0x90,0x90,0x9c,0x12,0x25,0x08,0x7f,0x84,0x7e,0x0e,
++0x12,0x22,0x65,0x90,0x90,0xa0,0x12,0x25,0x08,0x7f,0x88,0x7e,0x0e,0x12,0x22,0x65,
++0x90,0x90,0xa4,0x12,0x25,0x08,0x7f,0x8c,0x7e,0x0e,0x12,0x22,0x65,0x90,0x90,0xa8,
++0x12,0x25,0x08,0x7f,0xd0,0x7e,0x0e,0x12,0x22,0x65,0x90,0x90,0xac,0x12,0x25,0x08,
++0x7f,0xd4,0x7e,0x0e,0x12,0x22,0x65,0x90,0x90,0xb0,0x12,0x25,0x08,0x7f,0xd8,0x7e,
++0x0e,0x12,0x22,0x65,0x90,0x90,0xb4,0x12,0x25,0x08,0x7f,0xdc,0x7e,0x0e,0x12,0x22,
++0x65,0x90,0x90,0xb8,0x12,0x25,0x08,0x7f,0xe0,0x7e,0x0e,0x12,0x22,0x65,0x90,0x90,
++0xbc,0x12,0x25,0x08,0x7f,0xec,0x7e,0x0e,0x12,0x22,0x65,0x90,0x90,0xc0,0x12,0x25,
++0x08,0x7f,0x04,0x7e,0x0c,0x12,0x22,0x65,0x90,0x90,0xc4,0x12,0x25,0x08,0x7f,0x04,
++0x7e,0x0d,0x12,0x22,0x65,0x90,0x90,0xc8,0x12,0x25,0x08,0x7f,0x0c,0x7e,0x09,0x12,
++0x22,0x65,0x90,0x90,0xcc,0x12,0x25,0x08,0x7f,0x04,0x7e,0x08,0x12,0x22,0x65,0x90,
++0x90,0xd0,0x12,0x25,0x08,0x7f,0x8c,0x7e,0x08,0x12,0x22,0x65,0x90,0x91,0x88,0x12,
++0x25,0x08,0x90,0x91,0x88,0x12,0x43,0x09,0xed,0x44,0xc0,0xfd,0xec,0x90,0x91,0x88,
++0x12,0x25,0x08,0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,
++0x8c,0x7e,0x08,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x00,0x01,0x00,0x00,
++0x7f,0x44,0x7e,0x08,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x00,0xdb,0x25,
++0xa4,0x7f,0x5c,0x7e,0x08,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x20,0xdb,
++0x25,0xa4,0x7f,0x6c,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x20,
++0xdb,0x25,0xa4,0x7f,0x70,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,
++0x04,0x1b,0x25,0xa4,0x7f,0x74,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,
++0x14,0x04,0x1b,0x25,0xa4,0x7f,0x78,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,
++0x25,0x14,0x04,0x1b,0x25,0xa4,0x7f,0x7c,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,
++0x12,0x25,0x14,0x04,0x1b,0x25,0xa4,0x7f,0x80,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,
++0x96,0x12,0x25,0x14,0x63,0xdb,0x25,0xa4,0x7f,0x84,0x7e,0x0e,0x12,0x2b,0x08,0x90,
++0x80,0x96,0x12,0x25,0x14,0x04,0x1b,0x25,0xa4,0x7f,0x88,0x7e,0x0e,0x12,0x2b,0x08,
++0x90,0x80,0x96,0x12,0x25,0x14,0x20,0xdb,0x25,0xa4,0x7f,0x8c,0x7e,0x0e,0x12,0x2b,
++0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x20,0xdb,0x25,0xa4,0x7f,0xd0,0x7e,0x0e,0x12,
++0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x20,0xdb,0x25,0xa4,0x7f,0xd4,0x7e,0x0e,
++0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x20,0xdb,0x25,0xa4,0x7f,0xd8,0x7e,
++0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x00,0x1b,0x25,0xa4,0x7f,0xdc,
++0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x00,0x1b,0x25,0xa4,0x7f,
++0xe0,0x7e,0x0e,0x12,0x2b,0x08,0x90,0x80,0x96,0x12,0x25,0x14,0x24,0xdb,0x25,0xa4,
++0x7f,0xec,0x7e,0x0e,0x12,0x2b,0x08,0x7f,0x04,0x7e,0x0c,0x12,0x22,0x65,0x90,0x91,
++0x88,0x12,0x25,0x08,0x90,0x91,0x88,0x12,0x43,0x09,0xe4,0xff,0xec,0x90,0x91,0x88,
++0x12,0x25,0x08,0x90,0x91,0x88,0x12,0x43,0x09,0xef,0x44,0x11,0xff,0xec,0x90,0x91,
++0x88,0x12,0x25,0x08,0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,
++0x7f,0x04,0x7e,0x0c,0x12,0x2b,0x08,0x7f,0x04,0x7e,0x0d,0x12,0x22,0x65,0x90,0x91,
++0x88,0x12,0x25,0x08,0x90,0x91,0x88,0x12,0x43,0x09,0xef,0x54,0xf0,0xff,0xec,0x90,
++0x91,0x88,0x12,0x25,0x08,0x90,0x91,0x88,0x12,0x43,0x09,0xef,0x44,0x01,0xff,0xec,
++0x90,0x91,0x88,0x12,0x25,0x08,0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x96,0x12,
++0x25,0x08,0x7f,0x04,0x7e,0x0d,0x12,0x2b,0x08,0x7f,0x0c,0x7e,0x09,0x12,0x22,0x65,
++0x90,0x91,0x88,0x12,0x25,0x08,0x90,0x91,0x88,0x12,0x43,0x09,0xe4,0xff,0xec,0x90,
++0x91,0x88,0x12,0x25,0x08,0x90,0x91,0x88,0x12,0x43,0x09,0xef,0x44,0x11,0xff,0xec,
++0x90,0x91,0x88,0x12,0x25,0x08,0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x96,0x12,
++0x25,0x08,0x7f,0x0c,0x7e,0x09,0x12,0x2b,0x08,0x7f,0x0c,0x7e,0x09,0x12,0x22,0x65,
++0x90,0x91,0x88,0x12,0x25,0x08,0x90,0x91,0x88,0x12,0x43,0x09,0xed,0x54,0x0f,0xfd,
++0xec,0x54,0xf0,0xfc,0x90,0x91,0x88,0x12,0x25,0x08,0x90,0x91,0x88,0x12,0x43,0x09,
++0xed,0x44,0x10,0xfd,0xec,0x44,0x01,0xfc,0x90,0x91,0x88,0x12,0x25,0x08,0x90,0x91,
++0x88,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x0c,0x7e,0x09,0x12,0x2b,
++0x08,0x7f,0x04,0x7e,0x08,0x12,0x22,0x65,0x90,0x91,0x88,0x12,0x25,0x08,0x90,0x91,
++0x88,0x12,0x43,0x09,0xef,0x54,0xf0,0xff,0xec,0x90,0x91,0x88,0x12,0x25,0x08,0x90,
++0x91,0x88,0x12,0x43,0x09,0xef,0x44,0x01,0xff,0xec,0x90,0x91,0x88,0x12,0x25,0x08,
++0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x04,0x7e,0x08,
++0x12,0x2b,0x08,0xe4,0x90,0x90,0xe8,0xf0,0x22,0xe4,0xfd,0x7f,0x45,0x12,0x4b,0xee,
++0x90,0x04,0xfd,0xe4,0xf0,0xa3,0xf0,0x90,0x90,0xf7,0xf0,0x90,0x90,0xfd,0xf0,0x90,
++0x91,0x00,0xf0,0x90,0x90,0xfe,0xf0,0x90,0x91,0x01,0xf0,0x90,0x90,0xff,0xf0,0x90,
++0x91,0x02,0xf0,0x90,0x90,0xe9,0x04,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,
++0x90,0xee,0xf0,0x90,0x90,0xf3,0xf0,0x90,0x90,0xf5,0xf0,0x90,0x91,0x07,0xf0,0x90,
++0x90,0xf8,0xf0,0x90,0x90,0xf4,0xf0,0x90,0x90,0xed,0xf0,0x90,0x00,0x51,0xe0,0x44,
++0xc0,0xfd,0x7f,0x51,0x02,0x4b,0xee,0x90,0x05,0x60,0xe0,0x90,0x91,0x03,0xf0,0x90,
++0x05,0x61,0xe0,0x90,0x91,0x04,0xf0,0x90,0x05,0x62,0xe0,0x90,0x91,0x05,0xf0,0x90,
++0x05,0x63,0xe0,0x90,0x91,0x06,0xf0,0xc3,0x74,0xff,0x9f,0xfe,0x90,0x91,0x04,0xe0,
++0xd3,0x9e,0x40,0x1e,0xe0,0x2f,0xf0,0xa3,0xe0,0xb4,0xff,0x0f,0xe4,0xf0,0xa3,0xe0,
++0xb4,0xff,0x03,0xe4,0xf0,0x22,0x90,0x91,0x06,0x80,0x03,0x90,0x91,0x05,0xe0,0x04,
++0xf0,0x22,0x90,0x91,0x04,0xe0,0x2f,0xf0,0x22,0x90,0x90,0xf5,0xe0,0x64,0x01,0x60,
++0x02,0xe1,0x6e,0x90,0x00,0x46,0xe0,0x44,0x01,0xfd,0x7f,0x46,0x12,0x4b,0xee,0x90,
++0x91,0x07,0xe0,0x70,0x32,0x90,0x90,0xed,0xe0,0x60,0x15,0x90,0x90,0xf9,0x12,0x43,
++0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x80,0x7e,0x08,0x12,0x2b,0x08,0x80,0x06,
++0x90,0x05,0x22,0x74,0x7f,0xf0,0x90,0x90,0xf4,0xe0,0xff,0xd1,0x67,0x90,0x91,0x07,
++0x74,0x01,0x12,0x4b,0xe4,0x80,0x40,0x90,0x91,0x07,0xe0,0x64,0x01,0x70,0x38,0x90,
++0x90,0xf8,0xe0,0xff,0xd1,0x67,0xe4,0x90,0x91,0x07,0xf0,0x90,0x00,0x45,0xe0,0x44,
++0x01,0xfd,0x7f,0x45,0x12,0x4b,0xee,0x90,0x90,0xed,0xe0,0x60,0x15,0x90,0x90,0xef,
++0x12,0x43,0x09,0x90,0x80,0x96,0x12,0x25,0x08,0x7f,0x80,0x7e,0x08,0x12,0x2b,0x08,
++0x80,0x05,0x90,0x05,0x22,0xe4,0xf0,0x90,0x05,0x87,0xe0,0x64,0x80,0xf0,0x90,0x91,
++0x03,0xe0,0x90,0x05,0x84,0xf0,0x90,0x91,0x04,0xe0,0x90,0x05,0x85,0xf0,0x90,0x91,
++0x05,0xe0,0x90,0x05,0x86,0xf0,0x90,0x91,0x06,0xe0,0x90,0x05,0x87,0xf0,0x22,0x90,
++0x90,0xee,0xe0,0xc3,0x94,0x14,0x50,0x06,0xe0,0x04,0xf0,0x02,0x70,0x29,0x90,0x90,
++0xee,0xe0,0x64,0x14,0x60,0x03,0x02,0x70,0x29,0x90,0x90,0xfd,0xe0,0x70,0x25,0x90,
++0x91,0x00,0xe0,0x70,0x1f,0x90,0x90,0xfe,0xe0,0x70,0x19,0x90,0x91,0x01,0xe0,0x70,
++0x13,0x90,0x90,0xff,0xe0,0x70,0x0d,0x90,0x91,0x02,0xe0,0x70,0x07,0x90,0x04,0xfd,
++0xe0,0x54,0xfe,0xf0,0x90,0x90,0xfd,0xe0,0x90,0x04,0x44,0xf0,0x90,0x90,0xfe,0xe0,
++0x90,0x04,0x45,0xf0,0x90,0x90,0xff,0xe0,0x90,0x04,0x46,0xf0,0xa3,0xe4,0xf0,0x90,
++0x91,0x00,0xe0,0x90,0x04,0x48,0xf0,0x90,0x91,0x01,0xe0,0x90,0x04,0x49,0xf0,0x90,
++0x91,0x02,0xe0,0x90,0x04,0x4a,0xf0,0xa3,0xe4,0xf0,0x90,0x90,0xe9,0xe0,0x90,0x04,
++0x4c,0xf0,0x90,0x90,0xea,0xe0,0x90,0x04,0x4d,0xf0,0x90,0x90,0xeb,0xe0,0x90,0x04,
++0x4e,0xf0,0x90,0x90,0xec,0xe0,0x90,0x04,0x4f,0xf0,0xe4,0x90,0x90,0xee,0xf0,0x90,
++0x90,0xe9,0x04,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x90,0xfd,0xf0,0xa3,
++0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x05,0x60,0xe0,0x90,0x91,0x8c,
++0xf0,0x90,0x05,0x61,0xe0,0x90,0x91,0x8d,0xf0,0x90,0x05,0x62,0xe0,0x90,0x91,0x8e,
++0xf0,0x90,0x05,0x63,0xe0,0x90,0x91,0x8f,0xf0,0x90,0x91,0x06,0xe0,0xff,0x90,0x91,
++0x8f,0xe0,0xfe,0xd3,0x9f,0x50,0x0b,0x90,0x91,0x06,0xe0,0xc3,0x9e,0xd3,0x94,0x01,
++0x40,0x11,0x90,0x90,0xf4,0xe0,0xb4,0x01,0x02,0x80,0x03,0x90,0x90,0xf8,0xe0,0xff,
++0x12,0x6e,0x67,0x22,0x90,0x91,0x07,0xe0,0x64,0x01,0x60,0x08,0x90,0x90,0xf5,0xe0,
++0x60,0x02,0x21,0x4b,0x90,0x90,0xe9,0xe0,0xc3,0x94,0xff,0x50,0x05,0xe0,0x04,0xf0,
++0x80,0x3b,0x90,0x90,0xea,0xe0,0xc3,0x94,0xff,0x50,0x06,0xe0,0x04,0xf0,0xe4,0x80,
++0x28,0x90,0x90,0xeb,0xe0,0xc3,0x94,0xff,0x50,0x0a,0xe0,0x04,0xf0,0xe4,0x90,0x90,
++0xea,0xf0,0x80,0x15,0x90,0x90,0xec,0xe0,0xc3,0x94,0xff,0x50,0x10,0xe0,0x04,0xf0,
++0xe4,0x90,0x90,0xeb,0xf0,0x90,0x90,0xea,0xf0,0x90,0x90,0xe9,0xf0,0x90,0x00,0x44,
++0xe0,0x54,0x0c,0x60,0x76,0xe0,0x30,0xe2,0x32,0x90,0x90,0xfd,0xe0,0xc3,0x94,0xff,
++0x50,0x05,0xe0,0x04,0xf0,0x80,0x24,0x90,0x90,0xfe,0xe0,0xc3,0x94,0xff,0x50,0x06,
++0xe0,0x04,0xf0,0xe4,0x80,0x11,0x90,0x90,0xff,0xe0,0xc3,0x94,0xff,0x50,0x0c,0xe0,
++0x04,0xf0,0xe4,0x90,0x90,0xfe,0xf0,0x90,0x90,0xfd,0xf0,0x90,0x00,0x44,0xe0,0x30,
++0xe3,0x32,0x90,0x91,0x00,0xe0,0xc3,0x94,0xff,0x50,0x05,0xe0,0x04,0xf0,0x80,0x24,
++0x90,0x91,0x01,0xe0,0xc3,0x94,0xff,0x50,0x06,0xe0,0x04,0xf0,0xe4,0x80,0x11,0x90,
++0x91,0x02,0xe0,0xc3,0x94,0xff,0x50,0x0c,0xe0,0x04,0xf0,0xe4,0x90,0x91,0x01,0xf0,
++0x90,0x91,0x00,0xf0,0x90,0x04,0xfd,0xe0,0x44,0x01,0xf0,0x22,0x90,0x06,0x90,0xe0,
++0x44,0x01,0xf0,0x90,0x91,0x61,0xe0,0x30,0xe0,0x3c,0x90,0x91,0x5f,0xe0,0xff,0x90,
++0x91,0x5e,0xe0,0xfe,0xc4,0x13,0x54,0x01,0xfd,0x12,0x4a,0xf6,0x90,0x91,0x60,0xe0,
++0x75,0xf0,0x20,0xa4,0xff,0xae,0xf0,0x12,0x32,0x15,0x90,0x91,0x5e,0xe0,0xc4,0x13,
++0x54,0x07,0x30,0xe0,0x07,0xa3,0xe0,0xff,0xe4,0xfd,0x80,0x07,0x90,0x91,0x5f,0xe0,
++0xff,0x7d,0x01,0x12,0x4a,0xf6,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0xe4,0x90,
++0x91,0x19,0xf0,0xa3,0x74,0x08,0xf0,0xa3,0xf0,0xe4,0xa3,0xf0,0x90,0x01,0x1f,0xe0,
++0xfe,0x90,0x01,0x1e,0xe0,0x7c,0x00,0x24,0x00,0xff,0xec,0x3e,0x90,0x91,0x11,0xf0,
++0xa3,0xef,0xf0,0x90,0x02,0x87,0xe0,0x90,0x91,0x18,0xf0,0x90,0x91,0x56,0xe0,0x20,
++0xe0,0x02,0x61,0xc4,0xe4,0x90,0x91,0x17,0xf0,0x90,0x91,0x18,0xe0,0xff,0x90,0x91,
++0x17,0xe0,0xc3,0x9f,0x40,0x02,0x61,0xc4,0x90,0x91,0x11,0xe0,0xfc,0xa3,0xe0,0xfd,
++0xec,0xff,0x90,0xfd,0x11,0xf0,0x90,0x91,0x1c,0xef,0xf0,0x74,0x02,0x2d,0xf5,0x82,
++0xe4,0x34,0xfb,0xf5,0x83,0xe0,0x54,0x0f,0xfc,0x33,0x33,0x33,0x54,0xf8,0xff,0xed,
++0x24,0x18,0x2f,0x90,0x91,0x15,0xf0,0xe0,0x24,0x00,0xf5,0x82,0xe4,0x34,0xfb,0xf5,
++0x83,0xe0,0x54,0xfc,0x90,0x91,0x16,0xf0,0x74,0x01,0x2d,0xf5,0x82,0xe4,0x34,0xfb,
++0xf5,0x83,0xe0,0xfe,0x74,0x00,0x2d,0xf5,0x82,0xe4,0x34,0xfb,0xf5,0x83,0xe0,0x7a,
++0x00,0x24,0x00,0xff,0xea,0x3e,0x54,0x3f,0xab,0x07,0xfa,0x90,0x91,0x13,0xf0,0xa3,
++0xeb,0xf0,0xaf,0x04,0xef,0x75,0xf0,0x08,0xa4,0x24,0x18,0xff,0xe4,0x35,0xf0,0xfe,
++0xef,0x2b,0xfb,0xee,0x3a,0xfa,0x90,0x91,0x5a,0xe0,0xfe,0xa3,0xe0,0xff,0xad,0x03,
++0xac,0x02,0x12,0x45,0x09,0xaa,0x06,0xab,0x07,0x90,0x91,0x15,0xe0,0x24,0x00,0xf5,
++0x82,0xe4,0x34,0xfb,0xf5,0x83,0xe0,0x30,0xe7,0x08,0x90,0x91,0x19,0x74,0x02,0xf0,
++0x80,0x05,0xe4,0x90,0x91,0x19,0xf0,0xaf,0x03,0x90,0x91,0x11,0xea,0x8f,0xf0,0x12,
++0x42,0x81,0x90,0x91,0x5c,0xe0,0xfe,0xa3,0xe0,0xff,0x90,0x91,0x11,0xe0,0xfc,0xa3,
++0xe0,0xfd,0xd3,0x9f,0xec,0x9e,0x40,0x1b,0x90,0x91,0x5d,0xe0,0x24,0x01,0xff,0x90,
++0x91,0x5c,0xe0,0x34,0x00,0xfe,0xc3,0xed,0x9f,0xff,0xec,0x9e,0x90,0x91,0x11,0xf0,
++0xa3,0xef,0xf0,0x90,0x91,0x16,0xe0,0xff,0x24,0x40,0x60,0x04,0x24,0x20,0x70,0x27,
++0x90,0x91,0x5e,0xe0,0xfe,0xc4,0x13,0x13,0x13,0x54,0x01,0x20,0xe0,0x02,0x61,0x9c,
++0xef,0x90,0x00,0x81,0xb4,0xa0,0x05,0xe0,0x44,0x04,0x80,0x03,0xe0,0x44,0x08,0xfd,
++0x7f,0x81,0x12,0x4b,0xee,0x61,0x95,0x90,0x91,0x5e,0xe0,0xc4,0x13,0x13,0x54,0x03,
++0x20,0xe0,0x02,0x61,0x9c,0x90,0x91,0x15,0xe0,0xff,0x24,0x00,0xf5,0x82,0xe4,0x34,
++0xfb,0xf5,0x83,0xe0,0x54,0x0c,0x64,0x08,0x70,0x72,0x90,0x91,0x19,0xe0,0xfe,0xef,
++0x2e,0xff,0xa3,0xe0,0x2f,0xff,0x24,0x1e,0xf5,0x82,0xe4,0x34,0xfb,0xf5,0x83,0xe0,
++0x64,0x88,0x70,0x58,0x74,0x1f,0x2f,0xf5,0x82,0xe4,0x34,0xfb,0xf5,0x83,0xe0,0x64,
++0x8e,0x70,0x49,0x90,0x91,0x19,0xe0,0xff,0x90,0x91,0x15,0xe0,0x2f,0xff,0x90,0x91,
++0x1a,0xe0,0x2f,0xff,0xa3,0xe0,0x2f,0xff,0x24,0x19,0xf5,0x82,0xe4,0x34,0xfb,0xf5,
++0x83,0xe0,0x64,0x03,0x70,0x26,0x74,0x1e,0x2f,0xf5,0x82,0xe4,0x34,0xfb,0xf5,0x83,
++0xe0,0x90,0x00,0x81,0x30,0xe3,0x05,0xe0,0x44,0x01,0x80,0x03,0xe0,0x44,0x02,0xfd,
++0x7f,0x81,0x12,0x4b,0xee,0x90,0x91,0x56,0xe0,0x44,0x80,0xf0,0x90,0x91,0x56,0xe0,
++0xff,0xc4,0x13,0x13,0x13,0x54,0x01,0x30,0xe0,0x02,0x31,0x4c,0x71,0xc9,0xbf,0x01,
++0x13,0x90,0x91,0x11,0xe0,0xfe,0xa3,0xe0,0xff,0x12,0x44,0xb5,0x90,0x91,0x17,0xe0,
++0x04,0xf0,0x21,0xd9,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x91,0x56,0xe0,0xc4,0x13,0x13,
++0x13,0x54,0x01,0x30,0xe0,0x11,0xe0,0x44,0x80,0xf0,0x90,0x91,0x5e,0xe0,0xc4,0x54,
++0x0f,0x20,0xe0,0x03,0x7f,0x00,0x22,0x7f,0x01,0x22,0x8f,0x1f,0xe4,0x90,0x91,0x22,
++0xf0,0xe5,0x1f,0x14,0xfe,0x90,0x91,0x22,0xe0,0xff,0xc3,0x9e,0x50,0x0e,0xef,0x04,
++0xfd,0x12,0x2d,0x4d,0x90,0x91,0x22,0xe0,0x04,0xf0,0x80,0xe5,0xe5,0x1f,0x14,0xff,
++0x7d,0xff,0x12,0x2d,0x4d,0x90,0x91,0x22,0xe5,0x1f,0xf0,0x90,0x91,0x22,0xe0,0xc3,
++0x94,0xff,0x50,0x0f,0xe0,0xff,0x04,0xfd,0x12,0x2d,0x4d,0x90,0x91,0x22,0xe0,0x04,
++0xf0,0x80,0xe8,0xad,0x1f,0x7f,0xff,0x02,0x2d,0x4d,0xc3,0xee,0x94,0x01,0x40,0x0a,
++0x0d,0xed,0x13,0x90,0xfd,0x10,0xf0,0xe4,0x2f,0xff,0x22,0xc3,0xee,0x94,0x01,0x40,
++0x1e,0x90,0xfd,0x11,0xe0,0xb5,0x05,0x14,0x90,0x01,0x17,0xe0,0xb5,0x05,0x07,0x90,
++0xfd,0x11,0xe4,0xf0,0x80,0x06,0xed,0x04,0x90,0xfd,0x11,0xf0,0xe4,0x2f,0xff,0x22,
++0x14,0x25,};
++
++
++
++u8 Rtl8192CUFwUMCBCutWWImgArray[UMCBCutWWImgArrayLength] = {
++0xc2,0x88,0x02,0x00,0x51,0x00,0x00,0x00,0x03,0x23,0x16,0x45,0x66,0x34,0x01,0x00,
++0x58,0x92,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x02,0x43,0x9d,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x02,0x4a,0x22,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x02,0x57,0xe1,0x00,0x00,0x00,0x00,0x00,0x02,0x58,0xc4,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
++0xbb,0x01,0x0c,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe0,0x22,0x50,
++0x06,0xe9,0x25,0x82,0xf8,0xe6,0x22,0xbb,0xfe,0x06,0xe9,0x25,0x82,0xf8,0xe2,0x22,
++0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe4,0x93,0x22,0xbb,0x01,0x06,
++0x89,0x82,0x8a,0x83,0xf0,0x22,0x50,0x02,0xf7,0x22,0xbb,0xfe,0x01,0xf3,0x22,0xf8,
++0xbb,0x01,0x0d,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe8,0xf0,0x22,
++0x50,0x06,0xe9,0x25,0x82,0xc8,0xf6,0x22,0xbb,0xfe,0x05,0xe9,0x25,0x82,0xc8,0xf2,
++0x22,0xc5,0xf0,0xf8,0xa3,0xe0,0x28,0xf0,0xc5,0xf0,0xf8,0xe5,0x82,0x15,0x82,0x70,
++0x02,0x15,0x83,0xe0,0x38,0xf0,0x22,0xbb,0x01,0x10,0xe5,0x82,0x29,0xf5,0x82,0xe5,
++0x83,0x3a,0xf5,0x83,0xe0,0xf5,0xf0,0xa3,0xe0,0x22,0x50,0x09,0xe9,0x25,0x82,0xf8,
++0x86,0xf0,0x08,0xe6,0x22,0xbb,0xfe,0x0a,0xe9,0x25,0x82,0xf8,0xe2,0xf5,0xf0,0x08,
++0xe2,0x22,0xe5,0x83,0x2a,0xf5,0x83,0xe9,0x93,0xf5,0xf0,0xa3,0xe9,0x93,0x22,0xf8,
++0xbb,0x01,0x11,0xe5,0x82,0x29,0xf5,0x82,0xe5,0x83,0x3a,0xf5,0x83,0xe8,0xf0,0xe5,
++0xf0,0xa3,0xf0,0x22,0x50,0x09,0xe9,0x25,0x82,0xc8,0xf6,0x08,0xa6,0xf0,0x22,0xbb,
++0xfe,0x09,0xe9,0x25,0x82,0xc8,0xf2,0xe5,0xf0,0x08,0xf2,0x22,0xef,0x4b,0xff,0xee,
++0x4a,0xfe,0xed,0x49,0xfd,0xec,0x48,0xfc,0x22,0xe0,0xfc,0xa3,0xe0,0xfd,0xa3,0xe0,
++0xfe,0xa3,0xe0,0xff,0x22,0xa4,0x25,0x82,0xf5,0x82,0xe5,0xf0,0x35,0x83,0xf5,0x83,
++0x22,0xe0,0xfb,0xa3,0xe0,0xfa,0xa3,0xe0,0xf9,0x22,0xf8,0xe0,0xfb,0xa3,0xa3,0xe0,
++0xf9,0x25,0xf0,0xf0,0xe5,0x82,0x15,0x82,0x70,0x02,0x15,0x83,0xe0,0xfa,0x38,0xf0,
++0x22,0xeb,0xf0,0xa3,0xea,0xf0,0xa3,0xe9,0xf0,0x22,0xd0,0x83,0xd0,0x82,0xf8,0xe4,
++0x93,0x70,0x12,0x74,0x01,0x93,0x70,0x0d,0xa3,0xa3,0x93,0xf8,0x74,0x01,0x93,0xf5,
++0x82,0x88,0x83,0xe4,0x73,0x74,0x02,0x93,0x68,0x60,0xef,0xa3,0xa3,0xa3,0x80,0xdf,
++0xd0,0x83,0xd0,0x82,0xf8,0xe4,0x93,0x70,0x12,0x74,0x01,0x93,0x70,0x0d,0xa3,0xa3,
++0x93,0xf8,0x74,0x01,0x93,0xf5,0x82,0x88,0x83,0xe4,0x73,0x74,0x02,0x93,0xb5,0xf0,
++0x06,0x74,0x03,0x93,0x68,0x60,0xe9,0xa3,0xa3,0xa3,0xa3,0x80,0xd8,0x02,0x43,0xdb,
++0x02,0x50,0x34,0xe4,0x93,0xa3,0xf8,0xe4,0x93,0xa3,0x40,0x03,0xf6,0x80,0x01,0xf2,
++0x08,0xdf,0xf4,0x80,0x29,0xe4,0x93,0xa3,0xf8,0x54,0x07,0x24,0x0c,0xc8,0xc3,0x33,
++0xc4,0x54,0x0f,0x44,0x20,0xc8,0x83,0x40,0x04,0xf4,0x56,0x80,0x01,0x46,0xf6,0xdf,
++0xe4,0x80,0x0b,0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80,0x90,0x44,0x20,0xe4,0x7e,
++0x01,0x93,0x60,0xbc,0xa3,0xff,0x54,0x3f,0x30,0xe5,0x09,0x54,0x1f,0xfe,0xe4,0x93,
++0xa3,0x60,0x01,0x0e,0xcf,0x54,0xc0,0x25,0xe0,0x60,0xa8,0x40,0xb8,0xe4,0x93,0xa3,
++0xfa,0xe4,0x93,0xa3,0xf8,0xe4,0x93,0xa3,0xc8,0xc5,0x82,0xc8,0xca,0xc5,0x83,0xca,
++0xf0,0xa3,0xc8,0xc5,0x82,0xc8,0xca,0xc5,0x83,0xca,0xdf,0xe9,0xde,0xe7,0x80,0xbe,
++0x41,0x91,0x40,0x00,0x41,0x91,0x9c,0x00,0x41,0x91,0x23,0x80,0x41,0x91,0x24,0x80,
++0x41,0x91,0x9e,0x00,0x41,0x91,0x52,0x00,0x41,0x91,0x93,0x00,0x41,0x91,0x91,0x00,
++0x41,0x91,0x90,0x00,0x41,0x91,0x92,0x00,0x00,0xf0,0x90,0x91,0x30,0xe0,0x90,0x91,
++0x67,0xf0,0xe4,0xfb,0xfd,0x7f,0x54,0x7e,0x01,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,
++0x90,0x91,0x65,0xeb,0xf0,0xa3,0xe0,0xfb,0xa3,0xe0,0xf5,0x44,0xe4,0xf5,0x45,0x12,
++0x35,0xab,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x01,0x5f,0xe4,0xf0,0x90,0x01,0x3c,0x74,
++0x08,0xf0,0xe4,0x90,0x91,0x66,0xf0,0x90,0x91,0x2d,0xe0,0x90,0x91,0x67,0xf0,0xe4,
++0xfb,0xfd,0x7f,0x5c,0x7e,0x01,0x91,0x59,0x90,0x01,0x5f,0x74,0x05,0xf0,0x90,0x06,
++0x92,0x74,0x02,0xf0,0x90,0x91,0x36,0x14,0xf0,0xe5,0x6e,0x54,0x0f,0xc3,0x94,0x0c,
++0x50,0x02,0xf1,0x23,0x22,0x90,0x02,0x84,0xef,0xf0,0xa3,0xee,0xf0,0xa3,0x74,0x05,
++0xf0,0x22,0x7d,0x01,0xaf,0x6f,0xe1,0x27,0xf1,0xe6,0xbf,0x01,0x10,0x90,0x91,0x42,
++0xe0,0xff,0xe4,0xfd,0x12,0x48,0x22,0x90,0x04,0x1f,0x74,0x20,0xf0,0x22,0x8f,0x82,
++0x8e,0x83,0xa3,0xa3,0xa3,0xe4,0xf0,0x22,0xe4,0xf5,0x72,0x7f,0x60,0x7e,0x01,0x80,
++0xed,0x7f,0x00,0x22,0x90,0x91,0x32,0xe0,0xa3,0xe0,0x90,0x05,0x58,0xf0,0x22,0x22,
++0x22,0x22,0x22,0x02,0x5e,0x55,0x02,0x5e,0x5c,0xef,0x8e,0xf0,0x71,0x70,0x45,0x26,
++0x00,0x40,0x45,0x4e,0x00,0x80,0x45,0x79,0x01,0x00,0x45,0x8d,0x02,0x00,0x45,0xa5,
++0x04,0x00,0x00,0x00,0x45,0xc2,0xed,0x54,0x3f,0x70,0x04,0xfe,0xff,0x80,0x04,0x7e,
++0x00,0x7f,0x40,0xef,0x2d,0xff,0xee,0x3c,0xfe,0xef,0x78,0x06,0xce,0xc3,0x13,0xce,
++0x13,0xd8,0xf9,0x78,0x06,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0x80,0x26,0xed,0x54,
++0x7f,0x70,0x04,0xfe,0xff,0x80,0x04,0x7e,0x00,0x7f,0x80,0xef,0x2d,0xff,0xee,0x3c,
++0xfe,0xef,0x78,0x07,0xce,0xc3,0x13,0xce,0x13,0xd8,0xf9,0x78,0x07,0xc3,0x33,0xce,
++0x33,0xce,0xd8,0xf9,0xfd,0xac,0x06,0x80,0x49,0xed,0x70,0x04,0xfe,0xff,0x80,0x04,
++0x7e,0x01,0x7f,0x00,0xef,0x2d,0xee,0x3c,0x7d,0x00,0xfc,0x80,0x35,0xec,0x54,0x01,
++0x4d,0x70,0x04,0xfe,0xff,0x80,0x04,0x7e,0x02,0x7f,0x00,0xef,0x2d,0xee,0x3c,0xc3,
++0x13,0x7d,0x00,0x80,0x1a,0xec,0x54,0x03,0x4d,0x70,0x04,0xfe,0xff,0x80,0x04,0x7e,
++0x04,0x7f,0x00,0xef,0x2d,0xee,0x3c,0x13,0x13,0x54,0x3f,0x7d,0x00,0x25,0xe0,0x25,
++0xe0,0xfc,0xae,0x04,0xaf,0x05,0x22,0x90,0x91,0x09,0x12,0x2a,0x8b,0x00,0x00,0x00,
++0x00,0x90,0x06,0xa9,0xe0,0x90,0x91,0x08,0xf0,0xe0,0x54,0xc0,0x70,0x0a,0x53,0x71,
++0xfe,0x53,0x71,0xfd,0x91,0xc2,0x80,0x47,0x90,0x91,0x26,0xe0,0x60,0x41,0x90,0x91,
++0x38,0xe0,0x70,0x3b,0x90,0x91,0x38,0x74,0x01,0xf0,0x7f,0x00,0x7e,0x08,0x12,0x27,
++0xde,0x90,0x91,0x09,0x12,0x2a,0x7f,0x90,0x91,0x09,0x71,0x09,0xec,0x44,0x02,0xfc,
++0x90,0x91,0x09,0x12,0x2a,0x7f,0x90,0x91,0x09,0x71,0x09,0x90,0x80,0x85,0x12,0x2a,
++0x7f,0x7f,0x00,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x02,0x86,0xe0,0x54,0xfb,0xf0,0x90,
++0x91,0x08,0xe0,0x30,0xe6,0x13,0x43,0x71,0x01,0x90,0x91,0x3b,0xe0,0x64,0x02,0x60,
++0x04,0x91,0xc8,0x80,0x07,0x91,0x77,0x80,0x03,0x53,0x71,0xfe,0x90,0x91,0x08,0xe0,
++0x30,0xe7,0x16,0x43,0x71,0x02,0xe4,0x90,0x91,0x66,0x91,0x49,0x90,0x01,0x57,0x74,
++0x05,0xf0,0x90,0x91,0x3c,0x74,0x01,0xf0,0x22,0x53,0x71,0xfd,0x22,0xd3,0x10,0xaf,
++0x01,0xc3,0xc0,0xd0,0x8b,0x60,0x8a,0x61,0x89,0x62,0x90,0x91,0x68,0x71,0x41,0xab,
++0x63,0xaa,0x64,0xa9,0x65,0x90,0x91,0x6b,0x71,0x41,0xaf,0x66,0x15,0x66,0xef,0x60,
++0x1b,0x90,0x91,0x6b,0xe4,0x75,0xf0,0x01,0x71,0x2a,0x12,0x29,0xd9,0xff,0x90,0x91,
++0x68,0xe4,0x75,0xf0,0x01,0x71,0x2a,0xef,0x51,0x4d,0x80,0xde,0xab,0x60,0xaa,0x61,
++0xa9,0x62,0xd0,0xd0,0x92,0xaf,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,
++0x6e,0x71,0x41,0x90,0x91,0x9e,0xe0,0xff,0x04,0xf0,0x90,0x00,0x01,0xef,0x51,0x5f,
++0x7f,0xaf,0x7e,0x01,0x12,0x64,0x88,0xef,0x60,0x44,0x90,0x91,0x6e,0x71,0x21,0x8b,
++0x63,0x8a,0x64,0x89,0x65,0x75,0x66,0x02,0x7b,0x01,0x7a,0x01,0x79,0xa0,0xd1,0x6d,
++0x90,0x91,0x71,0x71,0x21,0x8b,0x63,0x8a,0x64,0x89,0x65,0x90,0x91,0x6e,0x71,0x21,
++0x12,0x29,0xd9,0xff,0xc4,0x54,0x0f,0xf5,0x66,0x7b,0x01,0x7a,0x01,0x79,0xa2,0xd1,
++0x6d,0x90,0x01,0xaf,0x74,0xff,0xf0,0x90,0x01,0xcb,0xe0,0x64,0x80,0xf0,0xd0,0xd0,
++0x92,0xaf,0x22,0x7d,0x01,0x7f,0x0c,0x90,0x91,0x95,0xed,0xf0,0x90,0x91,0x94,0xef,
++0xf0,0x54,0x0f,0xff,0xe5,0x6e,0x54,0x0f,0x6f,0x60,0x76,0x90,0x91,0x94,0xe0,0x30,
++0xe2,0x30,0xe5,0x6e,0x20,0xe2,0x05,0x7f,0x01,0x12,0x61,0x86,0xe5,0x6e,0x30,0xe3,
++0x0f,0x90,0x91,0x94,0xe0,0x20,0xe3,0x08,0x12,0x60,0xb1,0xef,0x60,0x53,0x80,0x52,
++0xe5,0x6e,0x20,0xe3,0x4c,0x90,0x91,0x94,0xe0,0x30,0xe3,0x45,0xa3,0xe0,0xff,0x02,
++0x61,0x6b,0xe5,0x6e,0x54,0x0f,0xff,0xbf,0x0c,0x0f,0x90,0x91,0x94,0xe0,0x20,0xe3,
++0x08,0x12,0x60,0xb1,0xef,0x60,0x2a,0xf1,0xb2,0xe5,0x6e,0x54,0x0f,0xff,0xbf,0x04,
++0x10,0x90,0x91,0x94,0xe0,0x20,0xe2,0x09,0x12,0x60,0xfa,0xef,0x60,0x13,0x12,0x48,
++0xce,0xe5,0x6e,0x54,0x0f,0xff,0xbf,0x02,0x08,0x91,0xf1,0xef,0x60,0x03,0x12,0x62,
++0x6c,0x22,0x90,0x06,0x04,0xe0,0x44,0x40,0xf0,0xe5,0x6d,0xb4,0x01,0x04,0x7f,0x01,
++0xf1,0xc9,0x53,0x6e,0xf0,0x43,0x6e,0x04,0x22,0x8f,0x67,0xf1,0xe6,0xbf,0x01,0x15,
++0x90,0x91,0x43,0x12,0x48,0x1e,0xad,0x07,0xac,0x06,0xaf,0x67,0x12,0x60,0x16,0x90,
++0x04,0x1f,0x74,0x20,0xf0,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x01,0xc4,
++0x74,0xe6,0xf0,0x74,0x47,0xa3,0xf0,0x90,0x04,0x1d,0xe0,0x60,0x1a,0x90,0x05,0x22,
++0xe0,0x54,0x90,0x60,0x07,0x90,0x01,0xc6,0xe0,0x44,0x40,0xf0,0x90,0x01,0xc7,0xe0,
++0x30,0xe1,0xe4,0x7f,0x00,0x80,0x02,0x7f,0x01,0xd0,0xd0,0x92,0xaf,0x22,0xe0,0xff,
++0x7d,0x01,0x90,0x91,0x74,0xef,0xf0,0xa3,0xed,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xe5,
++0x70,0x60,0x04,0xe4,0xff,0x11,0xb3,0x90,0x91,0x74,0xe0,0x30,0xe0,0x09,0x90,0x91,
++0x76,0xe4,0xf0,0xa3,0x74,0x80,0xf0,0x90,0x91,0x74,0xe0,0xff,0xc3,0x13,0x90,0xfd,
++0x10,0xf0,0x90,0x04,0x25,0xef,0xf0,0x90,0x91,0x75,0xe0,0x60,0x1f,0xa3,0xa3,0xe0,
++0xff,0x24,0x0f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x80,0xf0,0x74,0x10,
++0x2f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x80,0xf0,0x90,0x91,0x76,0xa3,
++0xe0,0xff,0xfd,0x24,0x08,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe4,0xf0,0x74,0x09,
++0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xf0,0xf0,0x74,0x21,0x2f,0xf5,
++0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xf7,0xf0,0x90,0x91,0x76,0xe0,0xfe,0xa3,
++0xe0,0xff,0x22,0xef,0x60,0x0b,0x90,0x91,0x51,0xe0,0xb4,0x01,0x10,0xe4,0xff,0x80,
++0x09,0x90,0x91,0x51,0xe0,0xb4,0x01,0x05,0x7f,0x01,0x12,0x69,0x87,0x22,0x90,0x01,
++0x37,0x74,0x02,0xf0,0x90,0x05,0x22,0x74,0xff,0xf0,0x12,0x68,0x7c,0xef,0x70,0x06,
++0x90,0x01,0xc8,0x74,0xfd,0xf0,0x7d,0x02,0x7f,0x03,0x12,0x36,0xe6,0xe5,0x70,0x60,
++0x04,0x7f,0x01,0x11,0xb3,0x12,0x68,0xbd,0x53,0x6e,0xf0,0x43,0x6e,0x02,0x22,0xef,
++0x64,0x01,0x70,0x42,0x7d,0x78,0x7f,0x02,0x12,0x36,0x75,0x7d,0x02,0x7f,0x03,0x12,
++0x36,0x75,0x90,0x01,0x36,0x74,0x03,0xf0,0xfd,0x7f,0x02,0x12,0x36,0xe6,0x7d,0x10,
++0x7f,0x03,0x12,0x36,0x92,0x90,0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,
++0x12,0x47,0x23,0xe4,0xff,0x11,0xb3,0x90,0x06,0x04,0xe0,0x54,0x7f,0xf0,0x90,0x06,
++0x0a,0xe0,0x54,0xf8,0xf0,0x22,0x90,0x01,0x36,0x74,0x7b,0xf0,0xa3,0x74,0x02,0xf0,
++0x7d,0x7b,0xff,0x12,0x36,0xe6,0x7d,0x02,0x7f,0x03,0x12,0x36,0xe6,0x7d,0x10,0x7f,
++0x03,0x12,0x36,0x92,0x90,0x06,0x04,0xe0,0x44,0x80,0xf0,0x90,0x06,0x0a,0xe0,0x44,
++0x07,0xf0,0x12,0x44,0xf4,0xe5,0x6d,0x20,0xe0,0x05,0xe4,0x90,0x91,0x29,0xf0,0x22,
++0x8b,0x0e,0x8a,0x0f,0x89,0x10,0xf1,0xf2,0xab,0x0e,0xaa,0x0f,0xa9,0x10,0x12,0x29,
++0xd9,0xf5,0x70,0x14,0x60,0x0e,0x14,0x60,0x1e,0x14,0x60,0x2f,0x24,0x03,0x70,0x40,
++0x7f,0x01,0x80,0x3a,0xab,0x0e,0xaa,0x0f,0xa9,0x10,0x90,0x00,0x02,0x12,0x42,0x20,
++0xfd,0xe4,0xff,0x31,0xe1,0x80,0x27,0xab,0x0e,0xaa,0x0f,0xa9,0x10,0x90,0x00,0x02,
++0x12,0x42,0x20,0xfd,0x7f,0x01,0x31,0xe1,0x1f,0x80,0x13,0xab,0x0e,0xaa,0x0f,0xa9,
++0x10,0x90,0x00,0x02,0x12,0x42,0x20,0xfd,0x7f,0x02,0x31,0xe1,0xe4,0xff,0x11,0xff,
++0x22,0xef,0x24,0xfe,0x60,0x0b,0x04,0x70,0x22,0x90,0x91,0x39,0x74,0x01,0xf0,0x80,
++0x16,0xed,0x70,0x0a,0x90,0x91,0x35,0xe0,0x90,0x91,0x39,0xf0,0x80,0x05,0x90,0x91,
++0x39,0xed,0xf0,0x90,0x91,0x39,0xe0,0x90,0x91,0x27,0xf0,0x22,0x12,0x47,0xe6,0xbf,
++0x01,0x0f,0x90,0x02,0x09,0xe0,0xff,0x7d,0x01,0x11,0x22,0x90,0x04,0x1f,0x74,0x20,
++0xf0,0x22,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0,0x82,0xc0,0xd0,0x75,0xd0,0x00,0xc0,
++0x00,0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0x90,
++0x01,0xc4,0x74,0x22,0xf0,0x74,0x4a,0xa3,0xf0,0x90,0x01,0x34,0xe0,0x55,0x28,0xf5,
++0x2c,0x90,0x01,0x36,0xe0,0x55,0x2a,0xf5,0x2e,0xa3,0xe0,0x55,0x2b,0xf5,0x2f,0xe5,
++0x2c,0x30,0xe0,0x5a,0x90,0x01,0x34,0x74,0x01,0xf0,0x85,0xd9,0x54,0xe5,0x70,0x14,
++0x24,0xfd,0x50,0x02,0x80,0x48,0x90,0x91,0x3b,0xe0,0x60,0x3a,0x90,0x01,0x5b,0xe4,
++0xf0,0x90,0x01,0x3c,0x74,0x04,0xf0,0x91,0x89,0xef,0x64,0x01,0x70,0x30,0x90,0x91,
++0x66,0xf0,0x90,0x91,0x2d,0xe0,0x90,0x91,0x67,0xf0,0xe4,0xfb,0xfd,0x7f,0x58,0x7e,
++0x01,0x12,0x44,0x59,0x90,0x01,0x5b,0x74,0x05,0xf0,0x90,0x06,0x92,0x74,0x01,0xf0,
++0x90,0x91,0x37,0xf0,0x80,0x08,0x91,0x89,0xbf,0x01,0x03,0x12,0x44,0xc2,0xe5,0x2c,
++0x30,0xe1,0x21,0x90,0x01,0x34,0x74,0x02,0xf0,0x85,0xd1,0x58,0x85,0xd2,0x59,0x85,
++0xd3,0x5a,0x85,0xd4,0x5b,0x85,0xd5,0x5c,0x85,0xd6,0x5d,0x85,0xd7,0x5e,0x85,0xd9,
++0x5f,0x12,0x64,0x66,0xe5,0x2c,0x30,0xe3,0x10,0x90,0x01,0x34,0x74,0x08,0xf0,0x90,
++0x91,0x56,0xe0,0x30,0xe0,0x03,0x43,0x57,0x04,0xe5,0x2c,0x30,0xe4,0x09,0x90,0x01,
++0x34,0x74,0x10,0xf0,0x43,0x57,0x10,0xe5,0x2c,0x30,0xe5,0x24,0x90,0x01,0xcf,0xe0,
++0x30,0xe5,0x1d,0xe0,0x54,0xdf,0xf0,0x90,0x01,0x34,0x74,0x20,0xf0,0x75,0xa8,0x00,
++0x75,0xe8,0x00,0xd1,0x65,0x90,0x00,0x03,0xe0,0x54,0xfb,0xf0,0x91,0xa0,0x80,0xfe,
++0xe5,0x2c,0x30,0xe6,0x06,0x90,0x01,0x34,0x74,0x40,0xf0,0xe5,0x2e,0x30,0xe0,0x15,
++0x90,0x91,0x50,0x74,0x01,0xf0,0x90,0x01,0x36,0xf0,0x12,0x63,0x2e,0x12,0x70,0xee,
++0x90,0x91,0x50,0xe4,0xf0,0xe5,0x2e,0x30,0xe1,0x3b,0x90,0x01,0x36,0x74,0x02,0xf0,
++0x43,0x57,0x40,0x90,0x01,0x02,0xe0,0x54,0x03,0x64,0x01,0x70,0x28,0x90,0x01,0x37,
++0xe0,0x30,0xe0,0x0a,0x74,0x01,0xf0,0x90,0x91,0x40,0xe4,0xf0,0x80,0x17,0x90,0x91,
++0x40,0xe0,0x04,0xf0,0xe0,0xc3,0x94,0x0a,0x40,0x0b,0xe4,0xf0,0x90,0x04,0x19,0xe0,
++0x30,0xe0,0x02,0x51,0x0c,0xe5,0x2e,0x30,0xe2,0x1a,0x90,0x01,0x36,0x74,0x04,0xf0,
++0x90,0x91,0x3a,0xe4,0xf0,0x90,0x05,0x58,0x74,0x03,0xf0,0x12,0x62,0xb8,0x90,0x91,
++0x3f,0xe0,0x04,0xf0,0xe5,0x2e,0x30,0xe3,0x28,0x90,0x01,0x36,0x74,0x08,0xf0,0xe5,
++0x6d,0x64,0x01,0x70,0x1c,0xe5,0x70,0x60,0x18,0x90,0x01,0x57,0xe4,0xf0,0x90,0x01,
++0x3c,0x74,0x02,0xf0,0x90,0x91,0x66,0xe4,0x12,0x44,0x49,0x90,0x01,0x57,0x74,0x05,
++0xf0,0xe5,0x2e,0x30,0xe4,0x2b,0x90,0x01,0x36,0x74,0x10,0xf0,0xe5,0x6d,0xb4,0x01,
++0x20,0xe5,0x70,0x60,0x1c,0x90,0x01,0x57,0xe4,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,
++0x90,0x91,0x3c,0xe4,0xf0,0x53,0x71,0xfd,0xe5,0x71,0x54,0x07,0x70,0x03,0x12,0x44,
++0xc2,0xe5,0x2e,0x30,0xe5,0x1f,0x90,0x01,0x36,0x74,0x20,0xf0,0xe5,0x6d,0xb4,0x01,
++0x14,0xe5,0x70,0x60,0x10,0x90,0x91,0x3b,0xe0,0x64,0x02,0x60,0x05,0x12,0x44,0xc8,
++0x80,0x03,0x12,0x44,0x77,0xe5,0x2e,0x30,0xe6,0x1b,0x90,0x01,0x36,0x74,0x40,0xf0,
++0xe5,0x6d,0xb4,0x01,0x10,0xe5,0x70,0x60,0x0c,0x53,0x71,0xfe,0xe5,0x71,0x54,0x07,
++0x70,0x03,0x12,0x44,0xc2,0xe5,0x2f,0x30,0xe1,0x09,0x90,0x01,0x37,0x74,0x02,0xf0,
++0x12,0x64,0x31,0x74,0x22,0x04,0x90,0x01,0xc4,0xf0,0x74,0x4a,0xa3,0xf0,0xd0,0x07,
++0xd0,0x06,0xd0,0x05,0xd0,0x04,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,
++0xd0,0x82,0xd0,0x83,0xd0,0xf0,0xd0,0xe0,0x32,0x90,0x04,0x1b,0xe0,0x54,0x7f,0x64,
++0x7f,0x7f,0x01,0x60,0x02,0x7f,0x00,0x22,0xf4,0xff,0x90,0x00,0x43,0xe0,0x5f,0xf0,
++0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x7f,0x10,0xdf,0xfe,0xd0,0xd0,0x92,0xaf,0x22,
++0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,0x9b,0xed,0xf0,0x90,0x91,0x9a,0xef,
++0xf0,0xd3,0x94,0x07,0x50,0x63,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,
++0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x47,0xe0,0x5f,0xf0,0x91,0xa0,0x90,0x91,0x9a,
++0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xff,0x90,0x00,
++0x46,0xe0,0x4f,0xf0,0x91,0xa0,0x90,0x91,0x9b,0xe0,0x60,0x16,0x90,0x91,0x9a,0xe0,
++0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xff,0x90,0x00,0x45,
++0x80,0x66,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,
++0xd8,0xfc,0xf4,0xff,0x90,0x00,0x45,0x80,0x6b,0x90,0x91,0x9a,0xe0,0x24,0xf8,0xf0,
++0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0,
++0x91,0x98,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,
++0xd8,0xfc,0xff,0x90,0x00,0x43,0xe0,0x4f,0xf0,0x91,0xa0,0x90,0x91,0x9b,0xe0,0x60,
++0x1b,0x90,0x91,0x9a,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,
++0xfc,0xc4,0x54,0xf0,0xff,0x90,0x00,0x42,0xe0,0x4f,0x80,0x1a,0x90,0x91,0x9a,0xe0,
++0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0,0xf4,
++0xff,0x90,0x00,0x42,0xe0,0x5f,0xf0,0x91,0xa0,0xd0,0xd0,0x92,0xaf,0x22,0xf0,0x90,
++0x00,0x45,0xe0,0x54,0xfe,0xfd,0x7f,0x45,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x8f,
++0x82,0x75,0x83,0x00,0xed,0xf0,0x91,0xa0,0xd0,0xd0,0x92,0xaf,0x22,0xef,0x14,0x60,
++0x30,0x14,0x60,0x66,0x24,0x02,0x60,0x02,0xc1,0x64,0x90,0x90,0xf3,0x74,0x02,0xf0,
++0x90,0x00,0x48,0xe0,0x44,0x0c,0xfd,0x7f,0x48,0xb1,0xa8,0x90,0x00,0x47,0xe0,0x44,
++0x08,0xfd,0x7f,0x47,0xb1,0xa8,0x90,0x00,0x45,0xe0,0x44,0x10,0xfd,0x7f,0x45,0x80,
++0x71,0xe4,0x90,0x90,0xf3,0xf0,0x90,0x90,0xef,0x12,0x43,0x09,0x90,0x80,0x85,0x12,
++0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x00,0x45,0xe0,0x44,0xef,0xfd,
++0x7f,0x45,0xb1,0xa8,0x90,0x00,0x45,0xe0,0x54,0xef,0xfd,0x7f,0x45,0xb1,0xa8,0x90,
++0x00,0x46,0xe0,0x44,0x10,0xfd,0x7f,0x46,0x80,0x38,0x90,0x90,0xf3,0x74,0x01,0xf0,
++0x90,0x90,0xf9,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08,
++0x12,0x2f,0xd9,0x90,0x00,0x45,0xe0,0x44,0x20,0xfd,0x7f,0x45,0xb1,0xa8,0x90,0x00,
++0x45,0xe0,0x44,0x10,0xfd,0x7f,0x45,0xb1,0xa8,0x90,0x00,0x46,0xe0,0x44,0x10,0xfd,
++0x7f,0x46,0xb1,0xa8,0x22,0x90,0x01,0x30,0xe4,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,
++0x90,0x01,0x38,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xfd,0x7f,0x50,0xb1,0xa8,0xe4,
++0xfd,0x7f,0x51,0xb1,0xa8,0xe4,0xfd,0x7f,0x52,0xb1,0xa8,0xe4,0xfd,0x7f,0x53,0xa1,
++0xa8,0x8b,0x0e,0x8a,0x0f,0x89,0x10,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x90,0xf6,
++0xf0,0xe0,0x30,0xe0,0x4b,0x90,0x90,0xed,0x74,0x01,0xf0,0x7f,0x80,0x7e,0x08,0x12,
++0x27,0xde,0x90,0x90,0xef,0x12,0x2a,0x7f,0xab,0x0e,0xaa,0x0f,0xa9,0x10,0x90,0x00,
++0x01,0x12,0x42,0x20,0xff,0xe4,0xfc,0xfd,0xfe,0x78,0x1a,0x12,0x2a,0x6c,0xa8,0x04,
++0xa9,0x05,0xaa,0x06,0xab,0x07,0x90,0x90,0xef,0x12,0x43,0x09,0xec,0x54,0x03,0xfc,
++0x12,0x42,0xfc,0x90,0x90,0xf9,0x12,0x2a,0x7f,0x90,0x05,0x22,0xe4,0xf0,0x80,0x2d,
++0xe4,0x90,0x90,0xed,0xf0,0x7f,0x80,0x7e,0x08,0x12,0x27,0xde,0xec,0x54,0x03,0xfc,
++0xec,0x44,0xc0,0xfc,0x90,0x90,0xef,0x12,0x2a,0x7f,0x90,0x90,0xef,0x12,0x43,0x09,
++0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x90,0xf6,
++0xe0,0x30,0xe1,0x19,0x7d,0x0c,0x7f,0x47,0xb1,0xa8,0x90,0x00,0x48,0xe0,0x44,0x0c,
++0xfd,0x7f,0x48,0xb1,0xa8,0x90,0x00,0x46,0xe0,0x44,0x10,0x80,0x1c,0x90,0x00,0x47,
++0xe0,0x54,0xf3,0xfd,0x7f,0x47,0xb1,0xa8,0x90,0x00,0x48,0xe0,0x54,0xf3,0xfd,0x7f,
++0x48,0xb1,0xa8,0x90,0x00,0x46,0xe0,0x54,0xef,0xfd,0x7f,0x46,0xb1,0xa8,0xe4,0x90,
++0x90,0xf3,0xf0,0x22,0x90,0x01,0x3c,0x74,0xff,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x01,
++0x34,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xfd,0x7f,0x54,0xb1,0xa8,0x7d,0xff,0x7f,
++0x55,0xb1,0xa8,0x7d,0xff,0x7f,0x56,0xb1,0xa8,0x7d,0xff,0x7f,0x57,0xa1,0xa8,0xe5,
++0x72,0x64,0x01,0x70,0x3e,0x12,0x54,0x41,0xbf,0x01,0x05,0x7f,0x01,0x12,0x56,0xe7,
++0x90,0x00,0x46,0xe0,0x44,0x04,0xfd,0x7f,0x46,0xb1,0xa8,0x90,0x00,0x44,0xe0,0x54,
++0xfb,0xfd,0x7f,0x44,0xb1,0xa8,0x90,0x00,0x46,0xe0,0x54,0xfb,0xfd,0x7f,0x46,0xb1,
++0xa8,0x7f,0x02,0x12,0x6f,0x09,0x8f,0x76,0x90,0x01,0xc9,0xe5,0x76,0xf0,0xb4,0x01,
++0x02,0xf1,0xd4,0x22,0x90,0x00,0x49,0xe0,0x90,0x91,0x9f,0xf0,0xe0,0x54,0x0f,0xf0,
++0x44,0xf0,0xfd,0x7f,0x49,0xb1,0xa8,0x90,0x91,0x9f,0xe0,0x44,0xb0,0xfd,0x7f,0x49,
++0xa1,0xa8,0xe4,0x90,0x91,0x3c,0xf0,0x90,0x91,0x28,0xf0,0xf5,0x71,0x22,0x75,0x28,
++0x33,0xe4,0xf5,0x29,0x75,0x2a,0x07,0xf5,0x2b,0x90,0x01,0x30,0xe5,0x28,0xf0,0xa3,
++0xe5,0x29,0xf0,0xa3,0xe5,0x2a,0xf0,0xa3,0xe5,0x2b,0xf0,0x22,0x75,0x30,0x1f,0x75,
++0x31,0x01,0xe4,0xf5,0x32,0x90,0x01,0x38,0xe5,0x30,0xf0,0xa3,0xe5,0x31,0xf0,0xa3,
++0xe5,0x32,0xf0,0x22,0xe4,0x90,0x91,0x0e,0xf0,0xa3,0xf0,0x75,0x8e,0x02,0xf1,0x02,
++0xd1,0xb4,0x90,0x91,0x4f,0xef,0xf0,0xd1,0xdb,0x90,0x91,0x51,0xef,0xf0,0xf1,0x3d,
++0x90,0x91,0x3d,0xee,0xf0,0xa3,0xef,0xf0,0xe4,0xf5,0x57,0xd1,0xd2,0x12,0x60,0x37,
++0x12,0x32,0x3d,0xd1,0xc1,0x12,0x4f,0xfe,0xf1,0x13,0xd1,0xcb,0x11,0x1c,0x12,0x44,
++0xff,0x31,0x23,0x11,0xdf,0x12,0x6f,0xaa,0x90,0x91,0x10,0xe5,0xd9,0xf0,0x12,0x4f,
++0x64,0xc2,0xaf,0x90,0x00,0x80,0xe0,0x44,0x40,0xf0,0x12,0x4c,0xa0,0x75,0xe8,0x03,
++0x43,0xa8,0x85,0xd2,0xaf,0x90,0x91,0x0e,0xe0,0x64,0x01,0xf0,0x24,0x34,0x90,0x01,
++0xc4,0xf0,0x74,0x50,0xa3,0xf0,0xe5,0x57,0x30,0xe2,0x10,0x12,0x5e,0x63,0xbf,0x01,
++0x0a,0xc2,0xaf,0x53,0x57,0xfb,0xd2,0xaf,0x12,0x71,0x8a,0xe5,0x57,0x30,0xe4,0x0a,
++0xc2,0xaf,0x53,0x57,0xef,0xd2,0xaf,0x12,0x5e,0xa0,0x90,0x90,0xf7,0xe0,0x70,0x03,
++0x12,0x70,0x08,0x11,0xf7,0x90,0x91,0x3f,0xe0,0x90,0x01,0xba,0xf0,0x80,0xb6,0x90,
++0x91,0x53,0xe0,0x54,0xfe,0xf0,0xe4,0x90,0x91,0x55,0xf0,0x90,0x91,0x53,0xe0,0x54,
++0x7f,0xf0,0xa3,0x74,0x0a,0xf0,0x22,0x90,0x06,0x34,0xe0,0x60,0x25,0x14,0x70,0x1b,
++0x7b,0x01,0x7a,0x06,0x79,0x35,0x7f,0xf9,0x7e,0x01,0x12,0x68,0x1a,0xbf,0x01,0x09,
++0x90,0x06,0x35,0xe0,0x54,0x0f,0xf0,0x80,0x04,0x80,0x00,0xc1,0xf4,0xe4,0x90,0x06,
++0x34,0xf0,0x22,0x90,0x91,0x56,0xe0,0x54,0xfe,0xf0,0xe0,0x54,0x7f,0xf0,0x90,0x01,
++0x17,0xe0,0xfe,0x90,0x01,0x16,0xe0,0x7c,0x00,0x24,0x00,0xff,0xec,0x3e,0x90,0x91,
++0x5c,0xf0,0xa3,0xef,0xf0,0x90,0x01,0x04,0xe0,0x54,0x0f,0x90,0x91,0x1c,0xf0,0xe0,
++0xff,0x74,0x40,0x7e,0x00,0xa8,0x07,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,
++0xf9,0x90,0x91,0x5b,0xf0,0xee,0x90,0x91,0x5a,0xf0,0x90,0x91,0x5e,0xe0,0x54,0xfe,
++0xf0,0xe0,0x54,0xfd,0xf0,0xe0,0x54,0xfb,0xf0,0xe0,0x54,0xf7,0xf0,0xe0,0x54,0xef,
++0xf0,0xe0,0x54,0xdf,0xf0,0xe0,0x54,0xbf,0xf0,0xe0,0x54,0x7f,0xf0,0xe4,0xa3,0xf0,
++0xa3,0xf0,0xa3,0xe0,0x54,0xfe,0xf0,0xe0,0x54,0xfd,0xf0,0xe0,0x54,0xf7,0xf0,0x22,
++0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x12,0x29,0xd9,0x54,0x01,0xff,0x90,0x91,0x56,
++0xe0,0x54,0xfe,0x4f,0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0x90,0x91,0x57,0xf0,0x90,
++0x00,0x02,0x12,0x42,0x20,0x90,0x91,0x58,0xf0,0x90,0x91,0x56,0xe0,0x30,0xe0,0x1a,
++0x90,0x06,0x09,0xe0,0x54,0xfe,0xf0,0x90,0x02,0x86,0xe0,0x44,0x04,0xf0,0x43,0x57,
++0x04,0x7d,0x08,0xe4,0xff,0x12,0x36,0xe6,0x80,0x12,0x7d,0x08,0xe4,0xff,0x12,0x36,
++0x75,0x90,0x02,0x86,0xe0,0x54,0xfb,0xf0,0x51,0x01,0x31,0x23,0xd0,0xd0,0x92,0xaf,
++0x22,0x90,0x06,0x90,0xe4,0xf0,0x21,0x6a,0x90,0x91,0x19,0x12,0x43,0x41,0xef,0x12,
++0x43,0x4a,0x52,0x40,0x01,0x52,0x49,0x02,0x52,0x6a,0x03,0x52,0x73,0x09,0x52,0x7b,
++0x0c,0x52,0x84,0x0d,0x52,0x8c,0x0e,0x52,0x9d,0x1a,0x52,0xa5,0x2c,0x52,0x51,0x2d,
++0x52,0x5a,0x2e,0x52,0xad,0x30,0x52,0x62,0x3b,0x52,0x95,0x3c,0x00,0x00,0x52,0xb5,
++0x90,0x91,0x19,0x12,0x43,0x21,0x02,0x64,0xde,0x90,0x91,0x19,0x12,0x43,0x21,0xc1,
++0xc5,0x90,0x91,0x19,0x12,0x43,0x21,0x02,0x65,0xf9,0x90,0x91,0x19,0x12,0x43,0x21,
++0xe1,0xa8,0x90,0x91,0x19,0x12,0x43,0x21,0xe1,0x28,0x90,0x91,0x19,0x12,0x43,0x21,
++0x02,0x66,0x41,0x90,0x91,0x19,0x12,0x43,0x21,0x80,0x42,0x90,0x91,0x19,0x12,0x43,
++0x21,0x02,0x5d,0x16,0x90,0x91,0x19,0x12,0x43,0x21,0xe1,0x75,0x90,0x91,0x19,0x12,
++0x43,0x21,0x02,0x4e,0x91,0x90,0x91,0x19,0x12,0x43,0x21,0x21,0xa0,0x90,0x91,0x19,
++0x12,0x43,0x21,0xa1,0x7f,0x90,0x91,0x19,0x12,0x43,0x21,0x81,0x5e,0x90,0x91,0x19,
++0x12,0x43,0x21,0xe1,0x55,0x90,0x01,0xc6,0xe0,0x44,0x01,0xf0,0x22,0xd3,0x10,0xaf,
++0x01,0xc3,0xc0,0xd0,0x90,0x91,0x1c,0x12,0x43,0x41,0x90,0x91,0x1c,0x12,0x43,0x21,
++0x90,0x00,0x01,0x12,0x42,0x97,0xfa,0xe5,0xf0,0x24,0x00,0xff,0xe4,0x3a,0xfe,0x90,
++0x91,0x1c,0x12,0x43,0x21,0x90,0x00,0x01,0xee,0x8f,0xf0,0x12,0x42,0xcf,0x12,0x29,
++0xd9,0xff,0x60,0x2c,0xb5,0x72,0x16,0x90,0x91,0x1c,0x12,0x43,0x21,0x90,0x00,0x01,
++0x12,0x42,0x97,0x65,0x74,0x70,0x04,0xe5,0x73,0x65,0xf0,0x60,0x23,0x90,0x91,0x1c,
++0x12,0x43,0x21,0x90,0x00,0x01,0x12,0x42,0x97,0xff,0xae,0xf0,0x71,0x35,0x80,0x10,
++0x90,0x91,0x1c,0x12,0x43,0x21,0x12,0x29,0xd9,0x65,0x72,0x60,0x03,0x12,0x44,0xe8,
++0xd0,0xd0,0x92,0xaf,0x22,0x90,0x91,0x1f,0xee,0xf0,0xa3,0xef,0xf0,0x75,0x72,0x01,
++0x8e,0x73,0xf5,0x74,0xe4,0xfd,0x7f,0x0b,0x71,0x77,0xe4,0xfd,0x7f,0x02,0x71,0x77,
++0x91,0x41,0xe4,0xff,0xd1,0xe7,0xe4,0xf5,0x76,0x90,0x01,0xc9,0xe5,0x76,0xf0,0x90,
++0x91,0x1f,0xe0,0xfc,0xa3,0xe0,0xfd,0xec,0xfb,0x8d,0x44,0xe4,0xf5,0x45,0x7d,0x01,
++0x7f,0x60,0x7e,0x01,0x02,0x35,0xab,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,
++0x22,0xed,0xf0,0x90,0x91,0x21,0xef,0xf0,0xd3,0x94,0x07,0x50,0x4f,0xa3,0xe0,0x70,
++0x1a,0x90,0x91,0x21,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,
++0xfc,0xf4,0xff,0x90,0x00,0x47,0xe0,0x5f,0xf0,0x80,0x17,0x90,0x91,0x21,0xe0,0xff,
++0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xff,0x90,0x00,0x47,0xe0,
++0x4f,0xf0,0x12,0x4c,0xa0,0x90,0x91,0x21,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,
++0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x46,0x80,0x5a,0x90,0x91,0x21,0xe0,
++0x24,0xf8,0xf0,0xa3,0xe0,0x70,0x1d,0x90,0x91,0x21,0xe0,0xff,0x74,0x01,0xa8,0x07,
++0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0,0xf4,0xff,0x90,0x00,0x43,0xe0,
++0x5f,0xf0,0x80,0x1a,0x90,0x91,0x21,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,
++0xc3,0x33,0xd8,0xfc,0xc4,0x54,0xf0,0xff,0x90,0x00,0x43,0xe0,0x4f,0xf0,0x12,0x4c,
++0xa0,0x90,0x91,0x21,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,
++0xfc,0xf4,0xff,0x90,0x00,0x43,0xe0,0x5f,0xf0,0x12,0x4c,0xa0,0xd0,0xd0,0x92,0xaf,
++0x22,0x7f,0x0b,0x12,0x6f,0x09,0xef,0x65,0x75,0x60,0x10,0xe5,0x75,0xb4,0x01,0x05,
++0xe4,0xf5,0x75,0x80,0x03,0x75,0x75,0x01,0x7f,0x01,0x22,0x7f,0x00,0x22,0xd3,0x10,
++0xaf,0x01,0xc3,0xc0,0xd0,0xe4,0xf5,0x10,0x75,0x11,0x04,0xf5,0x12,0xf5,0x14,0xf5,
++0x15,0x90,0x02,0x09,0xe0,0xff,0x12,0x29,0xd9,0xfe,0xef,0x2e,0xf5,0x13,0x30,0xe0,
++0x08,0x75,0x0e,0x00,0x75,0x0f,0x80,0x80,0x05,0xe4,0xf5,0x0e,0xf5,0x0f,0xe5,0x13,
++0xc3,0x13,0x90,0xfd,0x10,0xf0,0x74,0x20,0x25,0x10,0xf5,0x10,0xad,0x0f,0xe5,0x10,
++0x2d,0xff,0x24,0x01,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x90,0x91,0x47,0xf0,
++0x74,0x02,0x2f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0xfe,0xe5,0x10,0x2d,0x24,
++0x03,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x24,0x00,0xff,0xe4,0x3e,0x90,0x91,
++0x48,0xf0,0xa3,0xef,0xf0,0x7f,0x04,0xe5,0x10,0x25,0x0f,0x2f,0x24,0x00,0xf5,0x82,
++0xe4,0x34,0xfc,0xf5,0x83,0xe0,0xfe,0x74,0x46,0x2f,0xf5,0x82,0xe4,0x34,0x91,0xf5,
++0x83,0xee,0xf0,0x0f,0xbf,0x08,0xe0,0x12,0x66,0x89,0xef,0x70,0x3f,0x90,0x01,0xc3,
++0xe0,0x60,0x25,0xc3,0xe5,0x15,0x94,0xe8,0xe5,0x14,0x94,0x03,0x40,0x09,0x90,0x01,
++0xc6,0xe0,0x44,0x10,0xf0,0x80,0x63,0x05,0x15,0xe5,0x15,0x70,0x02,0x05,0x14,0x7f,
++0x0a,0x7e,0x00,0x12,0x37,0x54,0x80,0xd5,0x90,0x01,0xc6,0xe0,0x90,0x01,0xc3,0x30,
++0xe2,0x05,0x74,0xfe,0xf0,0x80,0x43,0x74,0xff,0xf0,0x80,0x3e,0xe5,0x10,0xb4,0x78,
++0x23,0xe4,0xf5,0x10,0x05,0x13,0xe5,0x0f,0x64,0x80,0x45,0x0e,0x70,0x06,0xf5,0x0e,
++0xf5,0x0f,0x80,0x06,0x75,0x0e,0x00,0x75,0x0f,0x80,0xe5,0x13,0xc3,0x13,0x90,0xfd,
++0x10,0xf0,0x80,0x06,0x74,0x08,0x25,0x10,0xf5,0x10,0xe5,0x12,0x15,0x12,0x70,0x02,
++0x15,0x11,0xe5,0x12,0x45,0x11,0x60,0x02,0x81,0x9c,0xd0,0xd0,0x92,0xaf,0x22,0x90,
++0x91,0x1c,0x12,0x43,0x41,0x12,0x29,0xd9,0xff,0x54,0x01,0xfe,0x90,0x91,0x5e,0xe0,
++0x54,0xfe,0x4e,0xf0,0xef,0x54,0x04,0xff,0xe0,0x54,0xfb,0x4f,0xf0,0x12,0x29,0xd9,
++0xff,0x54,0x02,0xfe,0x90,0x91,0x5e,0xe0,0x54,0xfd,0x4e,0xf0,0xef,0x54,0x08,0xff,
++0xe0,0x54,0xf7,0x4f,0xf0,0x12,0x29,0xd9,0xff,0x54,0x10,0xfe,0x90,0x91,0x5e,0xe0,
++0x54,0xef,0x4e,0xf0,0xef,0x54,0x20,0xff,0xe0,0x54,0xdf,0x4f,0xf0,0x12,0x29,0xd9,
++0xff,0x54,0x40,0xfe,0x90,0x91,0x5e,0xe0,0x54,0xbf,0x4e,0xf0,0xef,0x54,0x80,0xff,
++0xe0,0x54,0x7f,0x4f,0xf0,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x91,0x60,0xf0,0x90,
++0x00,0x01,0x12,0x42,0x20,0x90,0x91,0x5f,0xf0,0x90,0x00,0x03,0x12,0x42,0x20,0xff,
++0x54,0x01,0xfe,0x90,0x91,0x61,0xe0,0x54,0xfe,0x4e,0xf0,0xef,0x54,0x02,0xff,0xe0,
++0x54,0xfd,0x4f,0xf0,0x90,0x00,0x03,0x12,0x42,0x20,0x54,0x04,0xff,0x90,0x91,0x61,
++0xe0,0x54,0xfb,0x4f,0xf0,0x90,0x91,0x5e,0xe0,0x54,0x01,0x90,0x01,0xb8,0xf0,0x90,
++0x91,0x5e,0xe0,0xff,0xc4,0x13,0x54,0x01,0x90,0x01,0xb9,0xf0,0x90,0x91,0x61,0xe0,
++0x54,0x01,0x90,0x01,0xba,0xf0,0xa3,0x74,0xff,0xf0,0x12,0x29,0xd9,0x20,0xe0,0x02,
++0x41,0x01,0xe4,0xfd,0x7f,0x81,0x12,0x4d,0xa8,0x90,0x91,0x1c,0x12,0x43,0x21,0x12,
++0x29,0xd9,0xff,0xc3,0x13,0x30,0xe0,0x07,0x90,0x06,0x90,0xe0,0x44,0x02,0xf0,0xef,
++0x13,0x13,0x54,0x3f,0x30,0xe0,0x07,0x90,0x06,0x90,0xe0,0x44,0x04,0xf0,0x12,0x29,
++0xd9,0x13,0x13,0x13,0x54,0x1f,0x30,0xe0,0x07,0x90,0x06,0x90,0xe0,0x44,0x08,0xf0,
++0x90,0x91,0x61,0xe0,0x30,0xe0,0x1c,0x90,0x91,0x5e,0xe0,0xc4,0x13,0x54,0x07,0x30,
++0xe0,0x07,0xa3,0xe0,0xff,0xe4,0xfd,0x80,0x07,0x90,0x91,0x5f,0xe0,0xff,0x7d,0x01,
++0x12,0x4c,0xb0,0x22,0x90,0x00,0x02,0xe0,0x54,0xe0,0x7f,0x01,0x60,0x02,0x7f,0x00,
++0x22,0xe4,0xf5,0x75,0x22,0x12,0x29,0xd9,0xf5,0x6d,0x22,0x90,0x01,0x64,0x74,0xa0,
++0xf0,0x22,0x90,0x91,0x51,0xe0,0x90,0x90,0xe8,0xf0,0x22,0x90,0x00,0xf3,0xe0,0x7f,
++0x00,0x30,0xe3,0x02,0x7f,0x01,0x22,0x90,0x01,0xca,0xe5,0x75,0xf0,0xef,0x60,0x03,
++0x12,0x4f,0xd4,0x22,0x90,0x06,0x34,0x74,0xff,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xa3,
++0xf0,0x22,0xe4,0x90,0x91,0x4e,0xf0,0x90,0x00,0x80,0xe0,0x44,0x80,0xfd,0x7f,0x80,
++0x02,0x4d,0xa8,0x90,0x00,0xf3,0xe0,0x30,0xe2,0x0d,0x90,0x05,0x41,0x74,0x10,0xf0,
++0x90,0x05,0x5a,0xf0,0xa3,0xe4,0xf0,0x22,0x12,0x29,0xd9,0x60,0x02,0x80,0x01,0xe4,
++0x90,0x91,0x31,0xf0,0x90,0x91,0x31,0xe0,0x90,0x01,0xe7,0xf0,0x22,0x90,0x91,0x51,
++0xe0,0xb4,0x01,0x0c,0x90,0x00,0xf2,0xe0,0x30,0xe7,0x05,0x7e,0xfd,0x7f,0x33,0x22,
++0x7e,0xfd,0x7f,0x2f,0x22,0x12,0x29,0xd9,0xff,0x54,0x01,0xfe,0x90,0x91,0x53,0xe0,
++0x54,0xfe,0x4e,0xf0,0xef,0xc3,0x13,0x30,0xe0,0x0a,0x90,0x00,0x01,0x12,0x42,0x20,
++0x90,0x91,0x54,0xf0,0x22,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x90,0xf7,0xf0,0xe0,
++0x60,0x04,0xe0,0xf4,0x70,0x21,0xa2,0xaf,0xe4,0x33,0xf5,0x0e,0xc2,0xaf,0x90,0x00,
++0x47,0xe0,0x54,0xfb,0xfd,0x7f,0x47,0x12,0x4d,0xa8,0x7d,0x40,0x7f,0x01,0x12,0x36,
++0xaf,0xe5,0x0e,0x24,0xff,0x92,0xaf,0x22,0x12,0x29,0xd9,0x30,0xe0,0x19,0xc3,0x13,
++0x54,0x7f,0x90,0x91,0x34,0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0xff,0x90,0x91,0x32,
++0xe4,0xf0,0xa3,0xef,0xf0,0x80,0x0f,0x90,0x91,0x34,0x74,0x07,0xf0,0x90,0x91,0x32,
++0xe4,0xf0,0xa3,0x74,0x03,0xf0,0x90,0x91,0x32,0xe0,0xa3,0xe0,0x90,0x05,0x58,0xf0,
++0x22,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0,0x82,0xc0,0xd0,0x75,0xd0,0x00,0xc0,0x00,
++0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,0x07,0x90,0x01,
++0xc4,0x74,0xe1,0xf0,0x74,0x57,0xa3,0xf0,0x53,0x91,0xef,0x90,0x00,0x51,0xe0,0xff,
++0x90,0x00,0x55,0xe0,0x5f,0xf5,0x3d,0x90,0x00,0x52,0xe0,0xff,0x90,0x00,0x56,0xe0,
++0x5f,0xf5,0x3e,0xe5,0x3d,0x30,0xe4,0x06,0x90,0x00,0x55,0x74,0x10,0xf0,0xe5,0x3d,
++0x30,0xe5,0x06,0x90,0x00,0x55,0x74,0x20,0xf0,0xe5,0x3d,0x30,0xe6,0x1b,0x90,0x00,
++0x55,0x74,0x40,0xf0,0x90,0x90,0xf6,0xe0,0x54,0x03,0xff,0xbf,0x03,0x0b,0x90,0x90,
++0xf3,0xe0,0x60,0x05,0x7f,0x01,0x12,0x4d,0xbd,0xe5,0x3d,0x30,0xe7,0x15,0x90,0x00,
++0x55,0x74,0x80,0xf0,0x90,0x90,0xf6,0xe0,0x54,0x03,0xff,0xbf,0x03,0x05,0x7f,0x02,
++0x12,0x4d,0xbd,0xe5,0x3e,0x30,0xe0,0x06,0x90,0x00,0x56,0x74,0x01,0xf0,0xe5,0x3e,
++0x30,0xe1,0x06,0x90,0x00,0x56,0x74,0x02,0xf0,0xe5,0x3e,0x30,0xe2,0x06,0x90,0x00,
++0x56,0x74,0x04,0xf0,0xe5,0x3e,0x30,0xe3,0x06,0x90,0x00,0x56,0x74,0x08,0xf0,0x90,
++0x01,0xc4,0x74,0xe1,0xf0,0x74,0x57,0xa3,0xf0,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,
++0x04,0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,0xd0,0x82,0xd0,0x83,0xd0,
++0xf0,0xd0,0xe0,0x32,0xc0,0xe0,0xc0,0xf0,0xc0,0x83,0xc0,0x82,0xc0,0xd0,0x75,0xd0,
++0x00,0xc0,0x00,0xc0,0x01,0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0xc0,0x06,0xc0,
++0x07,0x75,0x0d,0x00,0x90,0x01,0xc4,0x74,0xc4,0xf0,0x74,0x58,0xa3,0xf0,0x53,0x91,
++0xdf,0x90,0x01,0x3c,0xe0,0x55,0x30,0xf5,0x34,0xa3,0xe0,0x55,0x31,0xf5,0x35,0xa3,
++0xe0,0x55,0x32,0xf5,0x36,0xa3,0xe0,0x55,0x33,0xf5,0x37,0xe5,0x34,0x30,0xe0,0x06,
++0x90,0x01,0x3c,0x74,0x01,0xf0,0xe5,0x34,0x30,0xe1,0x08,0x90,0x01,0x3c,0x74,0x02,
++0xf0,0x71,0x89,0xe5,0x34,0x30,0xe2,0x3a,0x90,0x01,0x3c,0x74,0x04,0xf0,0x90,0x06,
++0x92,0xe0,0x30,0xe0,0x25,0x90,0x91,0x66,0xe4,0xf0,0x90,0x91,0x2d,0xe0,0x90,0x91,
++0x67,0xf0,0xe4,0xfb,0xfd,0x7f,0x58,0x7e,0x01,0x12,0x44,0x59,0x90,0x01,0x5b,0x74,
++0x05,0xf0,0x90,0x06,0x92,0x74,0x01,0xf0,0x80,0x08,0x90,0x91,0x37,0xe4,0xf0,0x12,
++0x44,0xc2,0xe5,0x34,0x30,0xe3,0x3a,0x90,0x01,0x3c,0x74,0x08,0xf0,0x90,0x06,0x92,
++0xe0,0x30,0xe1,0x25,0x90,0x91,0x66,0xe4,0xf0,0x90,0x91,0x2d,0xe0,0x90,0x91,0x67,
++0xf0,0xe4,0xfb,0xfd,0x7f,0x5c,0x7e,0x01,0x12,0x44,0x59,0x90,0x01,0x5f,0x74,0x05,
++0xf0,0x90,0x06,0x92,0x74,0x02,0xf0,0x80,0x08,0x90,0x91,0x36,0xe4,0xf0,0x12,0x44,
++0xc2,0xe5,0x34,0x30,0xe4,0x09,0x90,0x01,0x3c,0x74,0x10,0xf0,0x12,0x4f,0x8f,0xe5,
++0x34,0x30,0xe5,0x08,0x90,0x01,0x3c,0x74,0x20,0xf0,0x51,0x62,0xe5,0x35,0x30,0xe0,
++0x5a,0x90,0x01,0x3d,0x74,0x01,0xf0,0x90,0x01,0x2f,0xe0,0x44,0x7f,0xf0,0x90,0x00,
++0x83,0xe0,0x54,0x0f,0xf5,0x0d,0xb4,0x01,0x02,0x80,0x1c,0xe5,0x0d,0xb4,0x02,0x05,
++0x90,0x00,0x83,0x80,0x12,0xe5,0x0d,0xb4,0x04,0x05,0x90,0x00,0x83,0x80,0x08,0xe5,
++0x0d,0xb4,0x0c,0x08,0x90,0x00,0x83,0xe0,0xf5,0x6f,0x80,0x06,0x90,0x01,0xbe,0xe0,
++0x04,0xf0,0x90,0x01,0xbb,0xe5,0x6f,0xf0,0xe5,0x6f,0x30,0xe0,0x03,0xa3,0x80,0x03,
++0x90,0x01,0xbd,0xe0,0x04,0xf0,0x71,0x6a,0x12,0x44,0xc2,0xe5,0x35,0x30,0xe2,0x06,
++0x90,0x01,0x3d,0x74,0x04,0xf0,0xe5,0x36,0x30,0xe0,0x06,0x90,0x01,0x3e,0x74,0x01,
++0xf0,0xe5,0x36,0x30,0xe1,0x06,0x90,0x01,0x3e,0x74,0x02,0xf0,0x74,0xc4,0x04,0x90,
++0x01,0xc4,0xf0,0x74,0x58,0xa3,0xf0,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04,0xd0,
++0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0xd0,0xd0,0xd0,0x82,0xd0,0x83,0xd0,0xf0,0xd0,
++0xe0,0x32,0x90,0x90,0xf5,0xe0,0x64,0x01,0x60,0x02,0x61,0x17,0x90,0x00,0x46,0xe0,
++0x44,0x01,0xfd,0x7f,0x46,0x12,0x4d,0xa8,0x90,0x91,0x07,0xe0,0x70,0x32,0x90,0x90,
++0xed,0xe0,0x60,0x15,0x90,0x90,0xf9,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,
++0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9,0x80,0x06,0x90,0x05,0x22,0x74,0x7f,0xf0,0x90,
++0x90,0xf4,0xe0,0xff,0x71,0x18,0x90,0x91,0x07,0x74,0x01,0x12,0x4d,0x9e,0x80,0x40,
++0x90,0x91,0x07,0xe0,0x64,0x01,0x70,0x38,0x90,0x90,0xf8,0xe0,0xff,0x71,0x18,0xe4,
++0x90,0x91,0x07,0xf0,0x90,0x00,0x45,0xe0,0x44,0x01,0xfd,0x7f,0x45,0x12,0x4d,0xa8,
++0x90,0x90,0xed,0xe0,0x60,0x15,0x90,0x90,0xef,0x12,0x43,0x09,0x90,0x80,0x85,0x12,
++0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9,0x80,0x05,0x90,0x05,0x22,0xe4,0xf0,
++0x90,0x05,0x87,0xe0,0x64,0x80,0xf0,0x90,0x91,0x03,0xe0,0x90,0x05,0x84,0xf0,0x90,
++0x91,0x04,0xe0,0x90,0x05,0x85,0xf0,0x90,0x91,0x05,0xe0,0x90,0x05,0x86,0xf0,0x90,
++0x91,0x06,0xe0,0x90,0x05,0x87,0xf0,0x22,0x90,0x05,0x60,0xe0,0x90,0x91,0x03,0xf0,
++0x90,0x05,0x61,0xe0,0x90,0x91,0x04,0xf0,0x90,0x05,0x62,0xe0,0x90,0x91,0x05,0xf0,
++0x90,0x05,0x63,0xe0,0x90,0x91,0x06,0xf0,0xc3,0x74,0xff,0x9f,0xfe,0x90,0x91,0x04,
++0xe0,0xd3,0x9e,0x40,0x1e,0xe0,0x2f,0xf0,0xa3,0xe0,0xb4,0xff,0x0f,0xe4,0xf0,0xa3,
++0xe0,0xb4,0xff,0x03,0xe4,0xf0,0x22,0x90,0x91,0x06,0x80,0x03,0x90,0x91,0x05,0xe0,
++0x04,0xf0,0x22,0x90,0x91,0x04,0xe0,0x2f,0xf0,0x22,0xe5,0x6f,0x30,0xe6,0x19,0xe5,
++0x6f,0x54,0x0f,0xff,0x90,0x91,0x24,0xe0,0xfe,0x4f,0x90,0x01,0x2f,0xf0,0xee,0x64,
++0x80,0x90,0x91,0x24,0xf0,0x53,0x6f,0xbf,0x22,0xe4,0x90,0x91,0x0d,0xf0,0xe5,0x70,
++0x70,0x02,0x81,0x13,0x90,0x91,0x3c,0xe0,0x60,0x0d,0xe4,0xf0,0x53,0x71,0xfd,0xe5,
++0x71,0x54,0x07,0x70,0x6e,0x80,0x69,0x90,0x91,0x28,0xe0,0x04,0xf0,0x53,0x71,0xef,
++0x90,0x91,0x3a,0xe0,0x04,0xf0,0x90,0x91,0x0d,0xe0,0xf9,0xff,0x7e,0x00,0x24,0x01,
++0xfd,0xee,0x33,0xfc,0x90,0x91,0x3a,0xe0,0xb5,0x05,0x06,0xe4,0xb5,0x04,0x02,0x80,
++0x12,0xef,0x24,0x02,0xff,0xe4,0x3e,0xfe,0x90,0x91,0x3a,0xe0,0xb5,0x07,0x0a,0xe4,
++0xb5,0x06,0x06,0x90,0x05,0x58,0xe0,0x04,0xf0,0xe9,0xff,0x90,0x91,0x2f,0xe0,0x2f,
++0xff,0xe4,0x33,0xfe,0x90,0x91,0x28,0xe0,0xd3,0x9f,0xee,0x64,0x80,0xf8,0x74,0x80,
++0x98,0x40,0x0d,0xe5,0x6d,0xb4,0x01,0x0b,0xa3,0xe0,0x70,0x07,0xe0,0x04,0xf0,0x22,
++0x12,0x44,0xc2,0x22,0x90,0x90,0xee,0xe0,0xc3,0x94,0x14,0x50,0x05,0xe0,0x04,0xf0,
++0x81,0xcc,0x90,0x90,0xee,0xe0,0x64,0x14,0x60,0x02,0x81,0xcc,0x90,0x90,0xfd,0xe0,
++0x70,0x25,0x90,0x91,0x00,0xe0,0x70,0x1f,0x90,0x90,0xfe,0xe0,0x70,0x19,0x90,0x91,
++0x01,0xe0,0x70,0x13,0x90,0x90,0xff,0xe0,0x70,0x0d,0x90,0x91,0x02,0xe0,0x70,0x07,
++0x90,0x04,0xfd,0xe0,0x54,0xfe,0xf0,0x90,0x90,0xfd,0xe0,0x90,0x04,0x44,0xf0,0x90,
++0x90,0xfe,0xe0,0x90,0x04,0x45,0xf0,0x90,0x90,0xff,0xe0,0x90,0x04,0x46,0xf0,0xa3,
++0xe4,0xf0,0x90,0x91,0x00,0xe0,0x90,0x04,0x48,0xf0,0x90,0x91,0x01,0xe0,0x90,0x04,
++0x49,0xf0,0x90,0x91,0x02,0xe0,0x90,0x04,0x4a,0xf0,0xa3,0xe4,0xf0,0x90,0x90,0xe9,
++0xe0,0x90,0x04,0x4c,0xf0,0x90,0x90,0xea,0xe0,0x90,0x04,0x4d,0xf0,0x90,0x90,0xeb,
++0xe0,0x90,0x04,0x4e,0xf0,0x90,0x90,0xec,0xe0,0x90,0x04,0x4f,0xf0,0xe4,0x90,0x90,
++0xee,0xf0,0x90,0x90,0xe9,0x04,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x90,
++0xfd,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,0x90,0x05,0x60,0xe0,
++0x90,0x91,0x8c,0xf0,0x90,0x05,0x61,0xe0,0x90,0x91,0x8d,0xf0,0x90,0x05,0x62,0xe0,
++0x90,0x91,0x8e,0xf0,0x90,0x05,0x63,0xe0,0x90,0x91,0x8f,0xf0,0x90,0x91,0x06,0xe0,
++0xff,0x90,0x91,0x8f,0xe0,0xfe,0xd3,0x9f,0x50,0x0b,0x90,0x91,0x06,0xe0,0xc3,0x9e,
++0xd3,0x94,0x01,0x40,0x10,0x90,0x90,0xf4,0xe0,0xb4,0x01,0x02,0x80,0x03,0x90,0x90,
++0xf8,0xe0,0xff,0x71,0x18,0x22,0x90,0x00,0x02,0x12,0x42,0x20,0x90,0x90,0xf5,0xf0,
++0x90,0x00,0x01,0x12,0x42,0x20,0x25,0xe0,0x25,0xe0,0x90,0x90,0xf4,0xf0,0x12,0x29,
++0xd9,0x25,0xe0,0x25,0xe0,0x90,0x90,0xf8,0xf0,0x90,0x05,0x60,0xe0,0x90,0x91,0x03,
++0xf0,0x90,0x05,0x61,0xe0,0x90,0x91,0x04,0xf0,0x90,0x05,0x62,0xe0,0x90,0x91,0x05,
++0xf0,0x90,0x05,0x63,0xe0,0x90,0x91,0x06,0xf0,0xa2,0xaf,0xe4,0x33,0x90,0x91,0x1c,
++0xf0,0xc2,0xaf,0x90,0x90,0xf4,0xe0,0xff,0x71,0x18,0x90,0x91,0x1c,0xe0,0x24,0xff,
++0x92,0xaf,0x90,0x90,0xf5,0xe0,0x70,0x02,0xc1,0x1f,0x90,0x90,0xf4,0xe0,0x70,0x02,
++0xc1,0x1f,0x90,0x90,0xf8,0xe0,0x70,0x02,0xc1,0x1f,0xa2,0xaf,0xe4,0x33,0x90,0x91,
++0x1c,0xf0,0xc2,0xaf,0x90,0x91,0x07,0x74,0x01,0xf0,0x90,0x91,0x1c,0xe0,0x24,0xff,
++0x92,0xaf,0x12,0x4d,0x9f,0x90,0x00,0x46,0xe0,0x44,0x01,0xfd,0x7f,0x46,0x12,0x4d,
++0xa8,0x90,0x90,0xed,0xe0,0x60,0x15,0x90,0x90,0xf9,0x12,0x43,0x09,0x90,0x80,0x85,
++0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x08,0x12,0x2f,0xd9,0x80,0x06,0x90,0x05,0x22,0x74,
++0x7f,0xf0,0x90,0x00,0x45,0xe0,0x54,0xef,0xfd,0x7f,0x45,0x12,0x4d,0xa8,0x90,0x05,
++0x87,0xe0,0x64,0x80,0xf0,0x90,0x91,0x03,0xe0,0x90,0x05,0x84,0xf0,0x90,0x91,0x04,
++0xe0,0x90,0x05,0x85,0xf0,0x90,0x91,0x05,0xe0,0x90,0x05,0x86,0xf0,0x90,0x91,0x06,
++0xe0,0x90,0x05,0x87,0xf0,0xa2,0xaf,0xe4,0x33,0x90,0x91,0x1c,0xf0,0xc2,0xaf,0x90,
++0x01,0x3c,0xe0,0x44,0x20,0xf0,0x7d,0x20,0xe4,0xff,0x12,0x37,0x00,0x80,0x2d,0x90,
++0x90,0xf5,0xe0,0x70,0x2f,0x90,0x91,0x07,0x12,0x4d,0x9e,0x90,0x00,0x46,0xe0,0x54,
++0xfe,0xfd,0x7f,0x46,0x12,0x4d,0xa8,0x90,0x05,0x22,0xe4,0xf0,0xa2,0xaf,0x33,0x90,
++0x91,0x1c,0xf0,0xc2,0xaf,0x7d,0x20,0xe4,0xff,0x12,0x36,0x92,0x90,0x91,0x1c,0xe0,
++0x24,0xff,0x92,0xaf,0x22,0x8f,0x20,0x8c,0x21,0x8d,0x22,0x22,0x8f,0x23,0x8c,0x24,
++0x8d,0x25,0x22,0xe4,0x90,0x91,0x11,0xf0,0xa3,0xf0,0x90,0x02,0x86,0xe0,0x20,0xe1,
++0x2c,0xc3,0x90,0x91,0x12,0xe0,0x94,0x20,0x90,0x91,0x11,0xe0,0x94,0x03,0x40,0x0a,
++0x90,0x01,0xc6,0xe0,0x44,0x20,0xf0,0x7f,0x00,0x22,0x90,0x91,0x11,0xe4,0x75,0xf0,
++0x01,0x12,0x42,0x81,0x7f,0x01,0x7e,0x00,0x12,0x37,0x54,0x80,0xcd,0x7f,0x01,0x22,
++0x90,0x01,0xcc,0xe0,0x54,0x0f,0x90,0x91,0x11,0xf0,0x90,0x91,0x11,0xe0,0xfd,0x70,
++0x02,0xe1,0xe2,0x90,0x91,0x9c,0xe0,0xff,0x74,0x01,0x7e,0x00,0xa8,0x07,0x08,0x80,
++0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0xef,0x5d,0x70,0x02,0xe1,0xdb,0x90,
++0x91,0x9c,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd0,0x12,0x43,0x15,0xe0,0x90,0x91,0x12,
++0xf0,0x75,0x63,0x01,0x75,0x64,0x91,0x75,0x65,0x12,0x75,0x66,0x01,0x7b,0x01,0x7a,
++0x91,0x79,0x13,0x12,0x46,0x6d,0x90,0x91,0x13,0xe0,0xff,0xc4,0x13,0x13,0x13,0x54,
++0x01,0x90,0x91,0x9c,0x30,0xe0,0x59,0xe0,0x75,0xf0,0x02,0x90,0x00,0x88,0x12,0x43,
++0x15,0xe0,0x90,0x91,0x14,0xf0,0x90,0x91,0x9c,0xe0,0x75,0xf0,0x02,0x90,0x00,0x89,
++0x12,0x43,0x15,0xe0,0x90,0x91,0x15,0xf0,0x90,0x91,0x9c,0xe0,0x75,0xf0,0x04,0x90,
++0x01,0xd1,0x12,0x43,0x15,0xe0,0x90,0x91,0x16,0xf0,0x90,0x91,0x9c,0xe0,0x75,0xf0,
++0x04,0x90,0x01,0xd2,0x12,0x43,0x15,0xe0,0x90,0x91,0x17,0xf0,0x90,0x91,0x9c,0xe0,
++0x75,0xf0,0x04,0x90,0x01,0xd3,0x12,0x43,0x15,0xe0,0x90,0x91,0x18,0xf0,0x80,0x33,
++0xe0,0x75,0xf0,0x04,0x90,0x01,0xd1,0x12,0x43,0x15,0xe0,0x90,0x91,0x14,0xf0,0x90,
++0x91,0x9c,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd2,0x12,0x43,0x15,0xe0,0x90,0x91,0x15,
++0xf0,0x90,0x91,0x9c,0xe0,0x75,0xf0,0x04,0x90,0x01,0xd3,0x12,0x43,0x15,0xe0,0x90,
++0x91,0x16,0xf0,0xef,0x54,0x7f,0xff,0x7b,0x01,0x7a,0x91,0x79,0x14,0x12,0x52,0x08,
++0x90,0x91,0x11,0xe0,0xff,0x90,0x91,0x9c,0xe0,0xfe,0x74,0x01,0xa8,0x06,0x08,0x80,
++0x02,0xc3,0x33,0xd8,0xfc,0xf4,0x5f,0x90,0x91,0x11,0xf0,0x90,0x91,0x9c,0xe0,0xff,
++0x74,0x01,0xa8,0x07,0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0x90,0x01,0xcc,0xf0,0x90,
++0x91,0x9c,0xe0,0x04,0xf0,0xe0,0x54,0x03,0xf0,0xc1,0xaa,0x90,0x01,0xc6,0xe0,0x44,
++0x02,0xf0,0x22,0xad,0x07,0x74,0x11,0x2d,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,
++0x44,0x01,0xf0,0x90,0x04,0x80,0xe0,0x54,0x0f,0xfc,0x74,0x14,0x2d,0xf5,0x82,0xe4,
++0x34,0xfc,0xf5,0x83,0xe0,0x54,0xc0,0x4c,0xfd,0x74,0x14,0x2f,0xf5,0x82,0xe4,0x34,
++0xfc,0xf5,0x83,0xed,0xf0,0x22,0xef,0x60,0x0f,0x74,0x21,0x2d,0xf5,0x82,0xe4,0x34,
++0xfc,0xf5,0x83,0xe0,0x44,0x10,0xf0,0x22,0x74,0x21,0x2d,0xf5,0x82,0xe4,0x34,0xfc,
++0xf5,0x83,0xe0,0x54,0xef,0xf0,0x22,0xe4,0xf5,0x6d,0xf5,0x71,0xf5,0x70,0x75,0x6f,
++0x0c,0x75,0x6e,0x0c,0x90,0x91,0x3b,0xf0,0x90,0x91,0x37,0xf0,0x90,0x91,0x36,0xf0,
++0x90,0x91,0x39,0x04,0xf0,0x90,0x91,0x27,0xf0,0xe4,0x90,0x91,0x3c,0xf0,0x90,0x91,
++0x29,0xf0,0x90,0x91,0x34,0x74,0x07,0xf0,0xe4,0x90,0x91,0x28,0xf0,0x90,0x91,0x32,
++0xf0,0xa3,0x74,0x03,0xf0,0x90,0x91,0x2f,0x74,0x0a,0xf0,0xa3,0x74,0x05,0xf0,0x90,
++0x91,0x2d,0x74,0x14,0xf0,0x90,0x91,0x35,0x74,0x05,0xf0,0xe4,0x90,0x91,0x2b,0xf0,
++0x90,0x91,0x25,0xf0,0x90,0x91,0x50,0xf0,0x90,0x91,0x31,0xf0,0x90,0x91,0x3a,0xf0,
++0x90,0x91,0x26,0xf0,0x90,0x91,0x38,0xf0,0x90,0x91,0x2e,0xf0,0x90,0x91,0x2c,0xf0,
++0x22,0x12,0x4c,0x89,0xef,0x64,0x01,0x60,0x08,0x90,0x01,0xb9,0x74,0x01,0xf0,0x80,
++0x30,0x90,0x91,0x37,0xe0,0x60,0x08,0x90,0x01,0xb9,0x74,0x02,0xf0,0x80,0x22,0x90,
++0x91,0x36,0xe0,0x60,0x08,0x90,0x01,0xb9,0x74,0x04,0xf0,0x80,0x14,0xe5,0x6f,0x54,
++0x0f,0xd3,0x94,0x04,0x40,0x08,0x90,0x01,0xb9,0x74,0x08,0xf0,0x80,0x03,0x7f,0x01,
++0x22,0x90,0x01,0xb8,0x74,0x08,0xf0,0x7f,0x00,0x22,0x12,0x4c,0x89,0xef,0x64,0x01,
++0x60,0x08,0x90,0x01,0xb9,0x74,0x01,0xf0,0x80,0x58,0xe5,0x71,0x54,0x03,0x60,0x08,
++0x90,0x01,0xb9,0x74,0x02,0xf0,0x80,0x4a,0xe5,0x6f,0x54,0x0f,0xd3,0x94,0x02,0x40,
++0x08,0x90,0x01,0xb9,0x74,0x04,0xf0,0x80,0x39,0xe5,0x71,0x30,0xe2,0x08,0x90,0x01,
++0xb9,0x74,0x08,0xf0,0x80,0x2c,0xe5,0x71,0x30,0xe4,0x08,0x90,0x01,0xb9,0x74,0x10,
++0xf0,0x80,0x1f,0x90,0x91,0x29,0xe0,0x60,0x08,0x90,0x01,0xb9,0x74,0x20,0xf0,0x80,
++0x11,0x90,0x91,0x31,0xe0,0x60,0x08,0x90,0x01,0xb9,0x74,0x80,0xf0,0x80,0x03,0x7f,
++0x01,0x22,0x90,0x01,0xb8,0x74,0x04,0xf0,0x7f,0x00,0x22,0x90,0x06,0x04,0xe0,0x54,
++0xbf,0xf0,0xef,0x60,0x0a,0xe5,0x6d,0xb4,0x01,0x05,0xe4,0xff,0x12,0x47,0xc9,0x53,
++0x6e,0xf0,0x43,0x6e,0x0c,0x22,0x90,0x91,0x9d,0xef,0xf0,0x31,0x9f,0x90,0x91,0x9d,
++0xe0,0x60,0x05,0x90,0x05,0x22,0xe4,0xf0,0x53,0x6e,0xf0,0x43,0x6e,0x04,0x22,0x90,
++0x90,0xd8,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x78,0x7e,0x08,0x12,
++0x2f,0xd9,0x90,0x90,0xdc,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,
++0x7e,0x0c,0x12,0x2f,0xd9,0x90,0x90,0xe0,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,
++0x7f,0x7f,0x00,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x90,0xe4,0x12,0x43,0x09,0x90,0x80,
++0x85,0x12,0x2a,0x7f,0x7f,0x70,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x59,0x12,0x2a,
++0x8b,0x00,0x03,0x2d,0x95,0xe4,0xfd,0xff,0x12,0x34,0x81,0x90,0x91,0x51,0xe0,0xb4,
++0x01,0x11,0x90,0x80,0x59,0x12,0x2a,0x8b,0x00,0x03,0x2d,0x95,0xe4,0xfd,0x7f,0x01,
++0x12,0x34,0x81,0x22,0x8f,0x77,0xe4,0x90,0x91,0x96,0xf0,0xa3,0xf0,0x90,0x01,0x09,
++0xe0,0x7f,0x00,0x30,0xe7,0x02,0x7f,0x01,0xef,0x65,0x77,0x60,0x3e,0xc3,0x90,0x91,
++0x97,0xe0,0x94,0x88,0x90,0x91,0x96,0xe0,0x94,0x13,0x40,0x08,0x90,0x01,0xc6,0xe0,
++0x44,0x80,0xf0,0x22,0x90,0x91,0x96,0xe4,0x75,0xf0,0x01,0x12,0x42,0x81,0x7f,0x14,
++0x7e,0x00,0x12,0x37,0x54,0xd3,0x90,0x91,0x97,0xe0,0x94,0x32,0x90,0x91,0x96,0xe0,
++0x94,0x00,0x40,0xb9,0x90,0x01,0xc7,0xe0,0x30,0xe0,0xb2,0x22,0x53,0x6e,0xf0,0x43,
++0x6e,0x01,0x12,0x45,0x00,0x12,0x45,0x01,0x53,0x6e,0xf0,0x43,0x6e,0x02,0x22,0x8f,
++0x78,0x12,0x47,0xe6,0xef,0x64,0x01,0x70,0x2e,0x90,0x91,0x44,0x12,0x48,0x1e,0xe5,
++0x78,0x60,0x10,0x74,0x21,0x2f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x44,0x10,
++0xf0,0x80,0x0e,0x74,0x21,0x2f,0xf5,0x82,0xe4,0x34,0xfc,0xf5,0x83,0xe0,0x54,0xef,
++0xf0,0x90,0x04,0x1f,0x74,0x20,0xf0,0x22,0xe5,0x6d,0x64,0x01,0x70,0x63,0xe5,0x70,
++0x60,0x5f,0xe5,0x70,0x64,0x02,0x60,0x06,0xe5,0x70,0x64,0x05,0x70,0x27,0x90,0x06,
++0xab,0xe0,0x90,0x91,0x27,0xf0,0x90,0x06,0xaa,0xe0,0x90,0x91,0x39,0xf0,0x90,0x91,
++0x27,0xe0,0x70,0x07,0x90,0x91,0x39,0xe0,0xff,0x80,0x05,0x90,0x91,0x27,0xe0,0xff,
++0x90,0x91,0x27,0xef,0xf0,0x90,0x91,0x29,0xe0,0x60,0x03,0xe0,0x14,0xf0,0xe4,0x90,
++0x91,0x28,0xf0,0x90,0x01,0x57,0xf0,0x90,0x01,0x3c,0x74,0x02,0xf0,0x53,0x71,0xfd,
++0x53,0x71,0xef,0xe5,0x70,0x14,0x24,0xfd,0x50,0x02,0x80,0x03,0x12,0x45,0xc7,0x71,
++0x22,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0xd0,0xd0,0x92,0xaf,0x22,0xe4,0xfb,
++0x90,0x91,0x78,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe5,0x70,0x70,0x02,0x61,0xc0,
++0xe5,0x6d,0x64,0x01,0x70,0x7a,0xe5,0x70,0x14,0x60,0x2b,0x24,0xfd,0x60,0x27,0x24,
++0x02,0x24,0xfb,0x50,0x02,0x80,0x21,0x90,0x91,0x27,0xe0,0x14,0xf0,0xe0,0x60,0x04,
++0xa3,0xe0,0x60,0x14,0x90,0x91,0x27,0xe0,0x70,0x08,0x90,0x91,0x39,0xe0,0x90,0x91,
++0x27,0xf0,0x7b,0x01,0x80,0x02,0x7b,0x01,0xeb,0x60,0x45,0x43,0x71,0x10,0xe4,0x90,
++0x91,0x66,0xf0,0x90,0x91,0x3a,0xe0,0x75,0xf0,0x05,0xa4,0xff,0x90,0x91,0x34,0xe0,
++0x2f,0x12,0x44,0x4e,0x90,0x01,0x57,0x74,0x05,0xf0,0xe5,0x6e,0x54,0x0f,0xc3,0x94,
++0x04,0x50,0x07,0x7d,0x01,0x7f,0x04,0x12,0x47,0x27,0x90,0x91,0x2e,0xe0,0x60,0x10,
++0x90,0x91,0x2c,0xe0,0x90,0x07,0x78,0x60,0x04,0x74,0x0d,0xf0,0x22,0x74,0x09,0xf0,
++0x22,0xe4,0xfb,0x90,0x91,0x7c,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe5,0x70,0x60,
++0x5f,0xe5,0x6d,0x64,0x01,0x70,0x59,0x0b,0x90,0x91,0x27,0xf0,0x04,0x60,0x51,0x43,
++0x71,0x10,0xe4,0x90,0x91,0x66,0xf0,0x90,0x91,0x3a,0xe0,0x75,0xf0,0x05,0xa4,0xff,
++0x90,0x91,0x34,0xe0,0x2f,0x90,0x91,0x67,0xf0,0xe4,0x1b,0x12,0x44,0x54,0x90,0x01,
++0x57,0x74,0x05,0xf0,0xe5,0x6e,0x54,0x0f,0xc3,0x94,0x04,0x50,0x07,0x7d,0x01,0x7f,
++0x04,0x12,0x47,0x27,0x90,0x91,0x2e,0xe0,0x60,0x11,0x90,0x91,0x2c,0xe0,0x90,0x07,
++0x78,0x60,0x05,0x74,0x0d,0xf0,0x80,0x03,0x74,0x09,0xf0,0x90,0x05,0x22,0xe4,0xf0,
++0x22,0x90,0x91,0x80,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe5,0x70,0x14,0x24,0xfd,
++0x50,0x02,0x80,0x21,0x90,0x91,0x3b,0xe0,0x60,0x06,0x7d,0x01,0x7f,0x0c,0x80,0x0d,
++0xe5,0x6e,0x54,0x0f,0xc3,0x94,0x04,0x50,0x07,0x7d,0x01,0x7f,0x04,0x12,0x47,0x27,
++0xe4,0xff,0x12,0x48,0xb3,0x22,0x90,0x91,0x08,0xe0,0x54,0xf0,0x44,0x03,0xf0,0x54,
++0x0f,0x44,0x80,0xf0,0x7b,0x00,0x7a,0x00,0x79,0x58,0x90,0x91,0x71,0x12,0x43,0x41,
++0x0b,0x7a,0x91,0x79,0x08,0x02,0x46,0xb7,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,0x90,
++0x91,0x84,0xee,0xf0,0xa3,0xef,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0x90,0x91,0x84,0xe0,
++0xfe,0xa3,0xe0,0xf5,0x82,0x8e,0x83,0xe0,0x60,0x2d,0xc3,0x90,0x91,0x87,0xe0,0x94,
++0xe8,0x90,0x91,0x86,0xe0,0x94,0x03,0x40,0x0b,0x90,0x01,0xc6,0xe0,0x44,0x10,0xf0,
++0x7f,0x00,0x80,0x15,0x90,0x91,0x86,0xe4,0x75,0xf0,0x01,0x12,0x42,0x81,0x7f,0x0a,
++0x7e,0x00,0x12,0x37,0x54,0x80,0xc5,0x7f,0x01,0xd0,0xd0,0x92,0xaf,0x22,0xd3,0x10,
++0xaf,0x01,0xc3,0xc0,0xd0,0x90,0x91,0x1c,0x12,0x43,0x41,0x90,0x91,0x1f,0x12,0x2a,
++0x8b,0x00,0x00,0x00,0x00,0x90,0x91,0x1c,0x12,0x43,0x21,0x90,0x00,0x01,0x12,0x42,
++0x20,0x90,0x91,0x3b,0xf0,0x90,0x00,0x03,0x12,0x42,0x20,0x90,0x91,0x25,0xf0,0x90,
++0x00,0x04,0x12,0x42,0x20,0xff,0x54,0x01,0x90,0x91,0x26,0xf0,0xef,0xc3,0x13,0x54,
++0x01,0x90,0x91,0x2e,0xf0,0x90,0x00,0x04,0x12,0x42,0x20,0xff,0x13,0x13,0x54,0x01,
++0x90,0x91,0x2c,0xf0,0x90,0x91,0x2e,0xe0,0x90,0x91,0x1f,0x70,0x26,0x12,0x2a,0x8b,
++0x00,0x00,0x02,0x10,0x90,0x91,0x1f,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,
++0x7f,0x60,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x91,0x1f,0x12,0x2a,0x8b,0x00,0x00,0x03,
++0x10,0x80,0x24,0x12,0x2a,0x8b,0x00,0x00,0x01,0x10,0x90,0x91,0x1f,0x12,0x43,0x09,
++0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x60,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x91,0x1f,
++0x12,0x2a,0x8b,0x00,0x00,0x03,0x00,0x90,0x91,0x1f,0x12,0x43,0x09,0x90,0x80,0x85,
++0x12,0x2a,0x7f,0x7f,0x70,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x91,0x26,0xe0,0x70,0x3d,
++0x90,0x91,0x38,0x74,0x01,0xf0,0x7f,0x00,0x7e,0x08,0x12,0x27,0xde,0x90,0x91,0x1f,
++0x12,0x2a,0x7f,0x90,0x91,0x1f,0x12,0x43,0x09,0xec,0x44,0x02,0xfc,0x90,0x91,0x1f,
++0x12,0x2a,0x7f,0x90,0x91,0x1f,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,
++0x00,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x02,0x86,0xe0,0x54,0xfb,0xf0,0x90,0x91,0x1c,
++0x12,0x43,0x21,0x12,0x49,0x80,0x90,0x01,0xe5,0xe5,0x70,0xf0,0x90,0x91,0x3b,0xe0,
++0x90,0x01,0xe6,0xf0,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x00,0x02,0x12,0x42,0x20,0xff,
++0x30,0xe0,0x25,0x12,0x29,0xd9,0x90,0x91,0x2f,0xf0,0x90,0x00,0x01,0x12,0x42,0x20,
++0x90,0x91,0x30,0xf0,0xef,0xc3,0x13,0x54,0x7f,0x90,0x91,0x2d,0xf0,0x90,0x00,0x03,
++0x12,0x42,0x20,0x90,0x91,0x35,0xf0,0x22,0x90,0x91,0x2f,0x74,0x0a,0xf0,0x90,0x91,
++0x30,0x74,0x05,0xf0,0x90,0x91,0x2d,0x74,0x14,0xf0,0x90,0x91,0x35,0x74,0x05,0xf0,
++0x22,0x90,0x02,0x09,0xe0,0xfd,0x12,0x29,0xd9,0xfe,0xaf,0x05,0xed,0x2e,0x90,0x91,
++0x41,0xf0,0x90,0x00,0x01,0x12,0x42,0x20,0xff,0xed,0x2f,0x90,0x91,0x42,0xf0,0x90,
++0x00,0x02,0x12,0x42,0x20,0xff,0xed,0x2f,0x90,0x91,0x43,0xf0,0x90,0x00,0x03,0x12,
++0x42,0x20,0xff,0xed,0x2f,0x90,0x91,0x44,0xf0,0x90,0x00,0x04,0x12,0x42,0x20,0xff,
++0xae,0x05,0xed,0x2f,0x90,0x91,0x45,0xf0,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,
++0x90,0x91,0x47,0xe0,0x90,0x91,0x1d,0xf0,0x90,0x91,0x48,0xe0,0xf5,0x19,0xa3,0xe0,
++0xf5,0x1a,0xe4,0xf5,0x16,0x74,0x4a,0x25,0x16,0xf5,0x82,0xe4,0x34,0x91,0xf5,0x83,
++0xe0,0xff,0x74,0x1b,0x25,0x16,0xf8,0xa6,0x07,0x05,0x16,0xe5,0x16,0xb4,0x04,0xe5,
++0x90,0x91,0x1d,0xe0,0x12,0x43,0x4a,0x66,0xe6,0x00,0x68,0x13,0x01,0x66,0xee,0x02,
++0x66,0xee,0x03,0x66,0xee,0x04,0x68,0x13,0x05,0x67,0xe3,0x80,0x67,0xf9,0x81,0x68,
++0x13,0x82,0x00,0x00,0x68,0x0f,0xaf,0x1e,0x12,0x73,0xdd,0x02,0x68,0x13,0x90,0x91,
++0x1d,0xe0,0xff,0xb4,0x02,0x08,0x90,0x91,0x1c,0x74,0x01,0xf0,0x80,0x0f,0xef,0x90,
++0x91,0x1c,0xb4,0x03,0x05,0x74,0x02,0xf0,0x80,0x03,0x74,0x04,0xf0,0xc3,0xe5,0x19,
++0x94,0x08,0x50,0x4a,0xe4,0xf5,0x16,0x90,0x91,0x1c,0xe0,0xff,0xe5,0x16,0xc3,0x9f,
++0x40,0x03,0x02,0x68,0x13,0xc3,0xe5,0x19,0x94,0x01,0x50,0x14,0xe5,0x16,0x25,0x1a,
++0xff,0xc3,0x74,0x03,0x95,0x16,0x24,0x1b,0xf8,0xe6,0xfd,0x12,0x4d,0xa8,0x80,0x1a,
++0xc3,0x74,0x03,0x95,0x16,0x24,0x1b,0xf8,0xe6,0xff,0xe5,0x16,0x7c,0x00,0x25,0x1a,
++0xfd,0xec,0x35,0x19,0x8d,0x82,0xf5,0x83,0xef,0xf0,0x05,0x16,0x80,0xb9,0xc3,0xe5,
++0x19,0x94,0x10,0x40,0x03,0x02,0x68,0x13,0x90,0x91,0x1d,0xe0,0x64,0x04,0x60,0x03,
++0x02,0x68,0x13,0xaf,0x1c,0xfc,0xfd,0xfe,0x78,0x10,0x12,0x2a,0x6c,0xc0,0x04,0xc0,
++0x05,0xc0,0x06,0xc0,0x07,0xaf,0x1b,0xe4,0xfc,0xfd,0xfe,0x78,0x18,0x12,0x2a,0x6c,
++0xd0,0x03,0xd0,0x02,0xd0,0x01,0xd0,0x00,0x12,0x42,0xfc,0xc0,0x04,0xc0,0x05,0xc0,
++0x06,0xc0,0x07,0xaf,0x1d,0xe4,0xfc,0xfd,0xfe,0x78,0x08,0x12,0x2a,0x6c,0xd0,0x03,
++0xd0,0x02,0xd0,0x01,0xd0,0x00,0x12,0x42,0xfc,0xa8,0x04,0xa9,0x05,0xaa,0x06,0xab,
++0x07,0xaf,0x1e,0xe4,0xfc,0xfd,0xfe,0x12,0x42,0xfc,0xa3,0x12,0x2a,0x7f,0x90,0x91,
++0x1e,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0xaf,0x1a,0xae,0x19,0x12,0x2f,
++0xd9,0x80,0x30,0xe5,0x1d,0x7f,0x00,0xfe,0xef,0x25,0x1e,0xf5,0x18,0xe4,0x3e,0xf5,
++0x17,0xaf,0x18,0xfe,0x12,0x37,0x54,0x80,0x1a,0xe5,0x1d,0x7f,0x00,0xfe,0xef,0x25,
++0x1e,0xf5,0x18,0xe4,0x3e,0xf5,0x17,0xaf,0x18,0xfe,0x12,0x36,0xcb,0x80,0x04,0x7f,
++0x00,0x80,0x02,0x7f,0x01,0xd0,0xd0,0x92,0xaf,0x22,0x8e,0x0e,0x8f,0x0f,0x8b,0x10,
++0x8a,0x11,0x89,0x12,0xe4,0x90,0x91,0x11,0xf0,0xef,0x90,0x00,0x31,0xf0,0x12,0x4c,
++0xa0,0xe5,0x0e,0x54,0x03,0xff,0x90,0x00,0x32,0xe0,0x54,0xfc,0x4f,0xf0,0x12,0x4c,
++0xa0,0x90,0x00,0x33,0xe0,0x54,0x7f,0xf0,0x12,0x4c,0xa0,0x90,0x00,0x33,0xe0,0x20,
++0xe7,0x0e,0x90,0x91,0x11,0xe0,0xc3,0x94,0x64,0x50,0x05,0xe0,0x04,0xf0,0x80,0xeb,
++0x90,0x91,0x11,0xe0,0xc3,0x94,0x64,0x50,0x10,0x90,0x00,0x30,0xe0,0xab,0x10,0xaa,
++0x11,0xa9,0x12,0x12,0x42,0x4d,0x7f,0x01,0x22,0x7f,0x00,0x22,0xe4,0x90,0x91,0x98,
++0xf0,0xa3,0xf0,0x90,0x05,0xf8,0xe0,0x70,0x0f,0xa3,0xe0,0x70,0x0b,0xa3,0xe0,0x70,
++0x07,0xa3,0xe0,0x70,0x03,0x7f,0x01,0x22,0xd3,0x90,0x91,0x99,0xe0,0x94,0xe8,0x90,
++0x91,0x98,0xe0,0x94,0x03,0x40,0x03,0x7f,0x00,0x22,0x7f,0x32,0x7e,0x00,0x12,0x37,
++0x54,0x90,0x91,0x98,0xe4,0x75,0xf0,0x01,0x12,0x42,0x81,0x80,0xc6,0x7f,0x78,0x7e,
++0x08,0x12,0x27,0xde,0x90,0x90,0xd8,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x27,
++0xde,0x90,0x90,0xdc,0x12,0x2a,0x7f,0x7f,0x00,0x7e,0x08,0x12,0x27,0xde,0x90,0x90,
++0xe0,0x12,0x2a,0x7f,0x90,0x91,0x51,0xe0,0x90,0x90,0xd8,0xb4,0x01,0x0d,0x12,0x43,
++0x09,0xef,0x54,0xc7,0xff,0xed,0x54,0xc7,0xfd,0x80,0x07,0x12,0x43,0x09,0xef,0x54,
++0xc7,0xff,0xec,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x78,0x7e,0x08,0x12,0x2f,0xd9,
++0x90,0x90,0xdc,0x12,0x43,0x09,0xef,0x54,0x0f,0xff,0xec,0x90,0x80,0x85,0x12,0x2a,
++0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x2f,0xd9,0x90,0x90,0xe0,0x12,0x43,0x09,0xef,0x44,
++0x02,0xff,0xec,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x00,0x7e,0x08,0x12,0x2f,0xd9,
++0x7f,0x70,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0xe4,0x12,0x2a,0x7f,0x90,0x80,0x85,
++0x12,0x2a,0x8b,0x00,0x1b,0x25,0xa0,0x7f,0x70,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,
++0x59,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe4,0xfd,0xff,0x12,0x34,0x81,0x90,0x91,
++0x51,0xe0,0xb4,0x01,0x11,0x90,0x80,0x59,0x12,0x2a,0x8b,0x00,0x00,0x00,0x00,0xe4,
++0xfd,0x7f,0x01,0x12,0x34,0x81,0x22,0xef,0x70,0x02,0x61,0x3d,0x90,0x90,0xe8,0xe0,
++0x60,0x02,0xe1,0x08,0x90,0x90,0xd4,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,
++0x7f,0x8c,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x90,0x80,0x12,0x43,0x09,0x90,0x80,0x85,
++0x12,0x2a,0x7f,0x7f,0x44,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x90,0x84,0x12,0x43,0x09,
++0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x5c,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x90,0x88,
++0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x6c,0x7e,0x0e,0x12,0x2f,0xd9,
++0x90,0x90,0x8c,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x70,0x7e,0x0e,
++0x12,0x2f,0xd9,0x90,0x90,0x90,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,
++0x74,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0x94,0x12,0x43,0x09,0x90,0x80,0x85,0x12,
++0x2a,0x7f,0x7f,0x78,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0x98,0x12,0x43,0x09,0x90,
++0x80,0x85,0x12,0x2a,0x7f,0x7f,0x7c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0x9c,0x12,
++0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x80,0x7e,0x0e,0x12,0x2f,0xd9,0x90,
++0x90,0xa0,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x84,0x7e,0x0e,0x12,
++0x2f,0xd9,0x90,0x90,0xa4,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x88,
++0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0xa8,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,
++0x7f,0x7f,0x8c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0xac,0x12,0x43,0x09,0x90,0x80,
++0x85,0x12,0x2a,0x7f,0x7f,0xd0,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0xb0,0x12,0x43,
++0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0xd4,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,
++0xb4,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0xd8,0x7e,0x0e,0x12,0x2f,
++0xd9,0x90,0x90,0xb8,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0xdc,0x7e,
++0x0e,0x12,0x2f,0xd9,0x90,0x90,0xbc,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,
++0x7f,0xe0,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0xc0,0x12,0x43,0x09,0x90,0x80,0x85,
++0x12,0x2a,0x7f,0x7f,0xec,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x90,0xc4,0x12,0x43,0x09,
++0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x2f,0xd9,0x90,0x90,0xc8,
++0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x0d,0x12,0x2f,0xd9,
++0x90,0x90,0xcc,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x0c,0x7e,0x09,
++0x12,0x2f,0xd9,0x90,0x90,0xd0,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,
++0x04,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x90,0xe8,0x74,0x01,0xf0,0x22,0x90,0x90,0xe8,
++0xe0,0x64,0x01,0x60,0x02,0xe1,0x08,0x7f,0x8c,0x7e,0x08,0x12,0x27,0xde,0x90,0x90,
++0xd4,0x12,0x2a,0x7f,0x7f,0x44,0x7e,0x08,0x12,0x27,0xde,0x90,0x90,0x80,0x12,0x2a,
++0x7f,0x7f,0x5c,0x7e,0x08,0x12,0x27,0xde,0x90,0x90,0x84,0x12,0x2a,0x7f,0x7f,0x6c,
++0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0x88,0x12,0x2a,0x7f,0x7f,0x70,0x7e,0x0e,0x12,
++0x27,0xde,0x90,0x90,0x8c,0x12,0x2a,0x7f,0x7f,0x74,0x7e,0x0e,0x12,0x27,0xde,0x90,
++0x90,0x90,0x12,0x2a,0x7f,0x7f,0x78,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0x94,0x12,
++0x2a,0x7f,0x7f,0x7c,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0x98,0x12,0x2a,0x7f,0x7f,
++0x80,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0x9c,0x12,0x2a,0x7f,0x7f,0x84,0x7e,0x0e,
++0x12,0x27,0xde,0x90,0x90,0xa0,0x12,0x2a,0x7f,0x7f,0x88,0x7e,0x0e,0x12,0x27,0xde,
++0x90,0x90,0xa4,0x12,0x2a,0x7f,0x7f,0x8c,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0xa8,
++0x12,0x2a,0x7f,0x7f,0xd0,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0xac,0x12,0x2a,0x7f,
++0x7f,0xd4,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0xb0,0x12,0x2a,0x7f,0x7f,0xd8,0x7e,
++0x0e,0x12,0x27,0xde,0x90,0x90,0xb4,0x12,0x2a,0x7f,0x7f,0xdc,0x7e,0x0e,0x12,0x27,
++0xde,0x90,0x90,0xb8,0x12,0x2a,0x7f,0x7f,0xe0,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,
++0xbc,0x12,0x2a,0x7f,0x7f,0xec,0x7e,0x0e,0x12,0x27,0xde,0x90,0x90,0xc0,0x12,0x2a,
++0x7f,0x7f,0x04,0x7e,0x0c,0x12,0x27,0xde,0x90,0x90,0xc4,0x12,0x2a,0x7f,0x7f,0x04,
++0x7e,0x0d,0x12,0x27,0xde,0x90,0x90,0xc8,0x12,0x2a,0x7f,0x7f,0x0c,0x7e,0x09,0x12,
++0x27,0xde,0x90,0x90,0xcc,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x08,0x12,0x27,0xde,0x90,
++0x90,0xd0,0x12,0x2a,0x7f,0x7f,0x8c,0x7e,0x08,0x12,0x27,0xde,0x90,0x91,0x88,0x12,
++0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xed,0x44,0xc0,0xfd,0xec,0x90,0x91,0x88,
++0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,
++0x8c,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x01,0x00,0x00,
++0x7f,0x44,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0xdb,0x25,
++0xa4,0x7f,0x5c,0x7e,0x08,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,
++0x25,0xa4,0x7f,0x6c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,
++0xdb,0x25,0xa4,0x7f,0x70,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,
++0x04,0x1b,0x25,0xa4,0x7f,0x74,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,
++0x8b,0x04,0x1b,0x25,0xa4,0x7f,0x78,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,
++0x2a,0x8b,0x04,0x1b,0x25,0xa4,0x7f,0x7c,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,
++0x12,0x2a,0x8b,0x04,0x1b,0x25,0xa4,0x7f,0x80,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,
++0x85,0x12,0x2a,0x8b,0x63,0xdb,0x25,0xa4,0x7f,0x84,0x7e,0x0e,0x12,0x2f,0xd9,0x90,
++0x80,0x85,0x12,0x2a,0x8b,0x04,0x1b,0x25,0xa4,0x7f,0x88,0x7e,0x0e,0x12,0x2f,0xd9,
++0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0x8c,0x7e,0x0e,0x12,0x2f,
++0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0xd0,0x7e,0x0e,0x12,
++0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0xd4,0x7e,0x0e,
++0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x20,0xdb,0x25,0xa4,0x7f,0xd8,0x7e,
++0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x1b,0x25,0xa4,0x7f,0xdc,
++0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x00,0x1b,0x25,0xa4,0x7f,
++0xe0,0x7e,0x0e,0x12,0x2f,0xd9,0x90,0x80,0x85,0x12,0x2a,0x8b,0x24,0xdb,0x25,0xa4,
++0x7f,0xec,0x7e,0x0e,0x12,0x2f,0xd9,0x7f,0x04,0x7e,0x0c,0x12,0x27,0xde,0x90,0x91,
++0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xe4,0xff,0xec,0x90,0x91,0x88,
++0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xef,0x44,0x11,0xff,0xec,0x90,0x91,
++0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,
++0x7f,0x04,0x7e,0x0c,0x12,0x2f,0xd9,0x7f,0x04,0x7e,0x0d,0x12,0x27,0xde,0x90,0x91,
++0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xef,0x54,0xf0,0xff,0xec,0x90,
++0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xef,0x44,0x01,0xff,0xec,
++0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x85,0x12,
++0x2a,0x7f,0x7f,0x04,0x7e,0x0d,0x12,0x2f,0xd9,0x7f,0x0c,0x7e,0x09,0x12,0x27,0xde,
++0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xe4,0xff,0xec,0x90,
++0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xef,0x44,0x11,0xff,0xec,
++0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x85,0x12,
++0x2a,0x7f,0x7f,0x0c,0x7e,0x09,0x12,0x2f,0xd9,0x7f,0x0c,0x7e,0x09,0x12,0x27,0xde,
++0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,0xed,0x54,0x0f,0xfd,
++0xec,0x54,0xf0,0xfc,0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,0x88,0x12,0x43,0x09,
++0xed,0x44,0x10,0xfd,0xec,0x44,0x01,0xfc,0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,
++0x88,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x0c,0x7e,0x09,0x12,0x2f,
++0xd9,0x7f,0x04,0x7e,0x08,0x12,0x27,0xde,0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,0x91,
++0x88,0x12,0x43,0x09,0xef,0x54,0xf0,0xff,0xec,0x90,0x91,0x88,0x12,0x2a,0x7f,0x90,
++0x91,0x88,0x12,0x43,0x09,0xef,0x44,0x01,0xff,0xec,0x90,0x91,0x88,0x12,0x2a,0x7f,
++0x90,0x91,0x88,0x12,0x43,0x09,0x90,0x80,0x85,0x12,0x2a,0x7f,0x7f,0x04,0x7e,0x08,
++0x12,0x2f,0xd9,0xe4,0x90,0x90,0xe8,0xf0,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,0xd0,
++0x90,0x91,0xa0,0xef,0xf0,0xd3,0x94,0x07,0x50,0x47,0xe0,0xff,0x74,0x01,0xa8,0x07,
++0x08,0x80,0x02,0xc3,0x33,0xd8,0xfc,0xf4,0xff,0x90,0x00,0x46,0xe0,0x5f,0xf0,0x12,
++0x4c,0xa0,0x90,0x91,0xa0,0xe0,0xfd,0x74,0x01,0x7e,0x00,0xa8,0x05,0x08,0x80,0x05,
++0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x00,0x44,0xe0,0xfb,0xe4,0xfe,0xef,
++0x5b,0xa8,0x05,0x08,0x80,0x06,0xce,0xa2,0xe7,0x13,0xce,0x13,0xd8,0xf8,0xff,0x80,
++0x44,0x90,0x91,0xa0,0xe0,0x24,0xf8,0xf0,0xe0,0xff,0x74,0x01,0xa8,0x07,0x08,0x80,
++0x02,0xc3,0x33,0xd8,0xfc,0x12,0x4c,0x98,0x90,0x91,0xa0,0xe0,0xfd,0x74,0x01,0x7e,
++0x00,0xa8,0x05,0x08,0x80,0x05,0xc3,0x33,0xce,0x33,0xce,0xd8,0xf9,0xff,0x90,0x00,
++0x42,0xe0,0xfb,0xe4,0xfe,0xef,0x5b,0xa8,0x05,0x08,0x80,0x06,0xce,0xa2,0xe7,0x13,
++0xce,0x13,0xd8,0xf8,0xff,0xd0,0xd0,0x92,0xaf,0x22,0xe4,0xfd,0x7f,0x45,0x12,0x4d,
++0xa8,0x90,0x04,0xfd,0xe4,0xf0,0xa3,0xf0,0x90,0x90,0xf7,0xf0,0x90,0x90,0xfd,0xf0,
++0x90,0x91,0x00,0xf0,0x90,0x90,0xfe,0xf0,0x90,0x91,0x01,0xf0,0x90,0x90,0xff,0xf0,
++0x90,0x91,0x02,0xf0,0x90,0x90,0xe9,0x04,0xf0,0xe4,0xa3,0xf0,0xa3,0xf0,0xa3,0xf0,
++0x90,0x90,0xee,0xf0,0x90,0x90,0xf3,0xf0,0x90,0x90,0xf5,0xf0,0x90,0x91,0x07,0xf0,
++0x90,0x90,0xf8,0xf0,0x90,0x90,0xf4,0xf0,0x90,0x90,0xed,0xf0,0x90,0x00,0x51,0xe0,
++0x44,0xc0,0xfd,0x7f,0x51,0x02,0x4d,0xa8,0x90,0x91,0x07,0xe0,0x64,0x01,0x60,0x08,
++0x90,0x90,0xf5,0xe0,0x60,0x02,0x01,0xdf,0x90,0x90,0xe9,0xe0,0xc3,0x94,0xff,0x50,
++0x05,0xe0,0x04,0xf0,0x80,0x3b,0x90,0x90,0xea,0xe0,0xc3,0x94,0xff,0x50,0x06,0xe0,
++0x04,0xf0,0xe4,0x80,0x28,0x90,0x90,0xeb,0xe0,0xc3,0x94,0xff,0x50,0x0a,0xe0,0x04,
++0xf0,0xe4,0x90,0x90,0xea,0xf0,0x80,0x15,0x90,0x90,0xec,0xe0,0xc3,0x94,0xff,0x50,
++0x10,0xe0,0x04,0xf0,0xe4,0x90,0x90,0xeb,0xf0,0x90,0x90,0xea,0xf0,0x90,0x90,0xe9,
++0xf0,0x90,0x00,0x44,0xe0,0x54,0x0c,0x60,0x76,0xe0,0x30,0xe2,0x32,0x90,0x90,0xfd,
++0xe0,0xc3,0x94,0xff,0x50,0x05,0xe0,0x04,0xf0,0x80,0x24,0x90,0x90,0xfe,0xe0,0xc3,
++0x94,0xff,0x50,0x06,0xe0,0x04,0xf0,0xe4,0x80,0x11,0x90,0x90,0xff,0xe0,0xc3,0x94,
++0xff,0x50,0x0c,0xe0,0x04,0xf0,0xe4,0x90,0x90,0xfe,0xf0,0x90,0x90,0xfd,0xf0,0x90,
++0x00,0x44,0xe0,0x30,0xe3,0x32,0x90,0x91,0x00,0xe0,0xc3,0x94,0xff,0x50,0x05,0xe0,
++0x04,0xf0,0x80,0x24,0x90,0x91,0x01,0xe0,0xc3,0x94,0xff,0x50,0x06,0xe0,0x04,0xf0,
++0xe4,0x80,0x11,0x90,0x91,0x02,0xe0,0xc3,0x94,0xff,0x50,0x0c,0xe0,0x04,0xf0,0xe4,
++0x90,0x91,0x01,0xf0,0x90,0x91,0x00,0xf0,0x90,0x04,0xfd,0xe0,0x44,0x01,0xf0,0x22,
++0xe5,0x6e,0x30,0xe3,0x04,0xe4,0xff,0x80,0x02,0x7f,0x01,0x02,0x47,0xc9,0x90,0x91,
++0x53,0xe0,0x30,0xe0,0x49,0xe5,0x6d,0x64,0x01,0x70,0x43,0x90,0x91,0x52,0xe0,0x04,
++0xf0,0xe5,0x70,0x64,0x03,0x60,0x05,0xe5,0x70,0xb4,0x06,0x0d,0x90,0x91,0x52,0xe0,
++0xff,0x74,0x01,0xd3,0x9f,0x50,0x14,0x80,0x07,0x90,0x91,0x52,0xe0,0xb4,0x0a,0x0b,
++0x90,0x91,0x55,0xe0,0x04,0xf0,0xe4,0x90,0x91,0x52,0xf0,0x90,0x91,0x55,0xe0,0xff,
++0x90,0x91,0x54,0xe0,0xb5,0x07,0x07,0x11,0xe0,0xe4,0x90,0x91,0x55,0xf0,0x22,0x90,
++0x06,0x90,0xe0,0x44,0x01,0xf0,0x90,0x91,0x61,0xe0,0x30,0xe0,0x3c,0x90,0x91,0x5f,
++0xe0,0xff,0x90,0x91,0x5e,0xe0,0xfe,0xc4,0x13,0x54,0x01,0xfd,0x12,0x4c,0xb0,0x90,
++0x91,0x60,0xe0,0x75,0xf0,0x20,0xa4,0xff,0xae,0xf0,0x12,0x37,0x54,0x90,0x91,0x5e,
++0xe0,0xc4,0x13,0x54,0x07,0x30,0xe0,0x07,0xa3,0xe0,0xff,0xe4,0xfd,0x80,0x07,0x90,
++0x91,0x5f,0xe0,0xff,0x7d,0x01,0x12,0x4c,0xb0,0x22,0xd3,0x10,0xaf,0x01,0xc3,0xc0,
++0xd0,0xe4,0x90,0x91,0x19,0xf0,0xa3,0x74,0x08,0xf0,0xa3,0xf0,0xe4,0xa3,0xf0,0x90,
++0x01,0x1f,0xe0,0xfe,0x90,0x01,0x1e,0xe0,0x7c,0x00,0x24,0x00,0xff,0xec,0x3e,0x90,
++0x91,0x11,0xf0,0xa3,0xef,0xf0,0x90,0x02,0x87,0xe0,0x90,0x91,0x18,0xf0,0x90,0x91,
++0x56,0xe0,0x20,0xe0,0x02,0x61,0xb7,0xe4,0x90,0x91,0x17,0xf0,0x90,0x91,0x18,0xe0,
++0xff,0x90,0x91,0x17,0xe0,0xc3,0x9f,0x40,0x02,0x61,0xb7,0x90,0x91,0x11,0xe0,0xfc,
++0xa3,0xe0,0xfd,0xec,0xff,0x90,0xfd,0x11,0xf0,0x90,0x91,0x1c,0xef,0xf0,0x74,0x02,
++0x2d,0xf5,0x82,0xe4,0x34,0xfb,0xf5,0x83,0xe0,0x54,0x0f,0xfc,0x33,0x33,0x33,0x54,
++0xf8,0xff,0xed,0x24,0x18,0x2f,0x90,0x91,0x15,0xf0,0xe0,0x24,0x00,0xf5,0x82,0xe4,
++0x34,0xfb,0xf5,0x83,0xe0,0x54,0xfc,0x90,0x91,0x16,0xf0,0x74,0x01,0x2d,0xf5,0x82,
++0xe4,0x34,0xfb,0xf5,0x83,0xe0,0xfe,0x74,0x00,0x2d,0xf5,0x82,0xe4,0x34,0xfb,0xf5,
++0x83,0xe0,0x7a,0x00,0x24,0x00,0xff,0xea,0x3e,0x54,0x3f,0xab,0x07,0xfa,0x90,0x91,
++0x13,0xf0,0xa3,0xeb,0xf0,0xaf,0x04,0xef,0x75,0xf0,0x08,0xa4,0x24,0x18,0xff,0xe4,
++0x35,0xf0,0xfe,0xef,0x2b,0xfb,0xee,0x3a,0xfa,0x90,0x91,0x5a,0xe0,0xfe,0xa3,0xe0,
++0xff,0xad,0x03,0xac,0x02,0x12,0x45,0x09,0xaa,0x06,0xab,0x07,0x90,0x91,0x15,0xe0,
++0x24,0x00,0xf5,0x82,0xe4,0x34,0xfb,0xf5,0x83,0xe0,0x30,0xe7,0x08,0x90,0x91,0x19,
++0x74,0x02,0xf0,0x80,0x05,0xe4,0x90,0x91,0x19,0xf0,0xaf,0x03,0x90,0x91,0x11,0xea,
++0x8f,0xf0,0x12,0x42,0x81,0x90,0x91,0x5c,0xe0,0xfe,0xa3,0xe0,0xff,0x90,0x91,0x11,
++0xe0,0xfc,0xa3,0xe0,0xfd,0xd3,0x9f,0xec,0x9e,0x40,0x1b,0x90,0x91,0x5d,0xe0,0x24,
++0x01,0xff,0x90,0x91,0x5c,0xe0,0x34,0x00,0xfe,0xc3,0xed,0x9f,0xff,0xec,0x9e,0x90,
++0x91,0x11,0xf0,0xa3,0xef,0xf0,0x90,0x91,0x16,0xe0,0xff,0x24,0x40,0x60,0x04,0x24,
++0x20,0x70,0x27,0x90,0x91,0x5e,0xe0,0xfe,0xc4,0x13,0x13,0x13,0x54,0x01,0x20,0xe0,
++0x02,0x61,0x8f,0xef,0x90,0x00,0x81,0xb4,0xa0,0x05,0xe0,0x44,0x04,0x80,0x03,0xe0,
++0x44,0x08,0xfd,0x7f,0x81,0x12,0x4d,0xa8,0x61,0x88,0x90,0x91,0x5e,0xe0,0xc4,0x13,
++0x13,0x54,0x03,0x20,0xe0,0x02,0x61,0x8f,0x90,0x91,0x15,0xe0,0xff,0x24,0x00,0xf5,
++0x82,0xe4,0x34,0xfb,0xf5,0x83,0xe0,0x54,0x0c,0x64,0x08,0x70,0x72,0x90,0x91,0x19,
++0xe0,0xfe,0xef,0x2e,0xff,0xa3,0xe0,0x2f,0xff,0x24,0x1e,0xf5,0x82,0xe4,0x34,0xfb,
++0xf5,0x83,0xe0,0x64,0x88,0x70,0x58,0x74,0x1f,0x2f,0xf5,0x82,0xe4,0x34,0xfb,0xf5,
++0x83,0xe0,0x64,0x8e,0x70,0x49,0x90,0x91,0x19,0xe0,0xff,0x90,0x91,0x15,0xe0,0x2f,
++0xff,0x90,0x91,0x1a,0xe0,0x2f,0xff,0xa3,0xe0,0x2f,0xff,0x24,0x19,0xf5,0x82,0xe4,
++0x34,0xfb,0xf5,0x83,0xe0,0x64,0x03,0x70,0x26,0x74,0x1e,0x2f,0xf5,0x82,0xe4,0x34,
++0xfb,0xf5,0x83,0xe0,0x90,0x00,0x81,0x30,0xe3,0x05,0xe0,0x44,0x01,0x80,0x03,0xe0,
++0x44,0x02,0xfd,0x7f,0x81,0x12,0x4d,0xa8,0x90,0x91,0x56,0xe0,0x44,0x80,0xf0,0x90,
++0x91,0x56,0xe0,0xff,0xc4,0x13,0x13,0x13,0x54,0x01,0x30,0xe0,0x02,0x31,0x3f,0x71,
++0xbc,0xbf,0x01,0x13,0x90,0x91,0x11,0xe0,0xfe,0xa3,0xe0,0xff,0x12,0x44,0xb5,0x90,
++0x91,0x17,0xe0,0x04,0xf0,0x21,0xcc,0xd0,0xd0,0x92,0xaf,0x22,0x90,0x91,0x56,0xe0,
++0xc4,0x13,0x13,0x13,0x54,0x01,0x30,0xe0,0x11,0xe0,0x44,0x80,0xf0,0x90,0x91,0x5e,
++0xe0,0xc4,0x54,0x0f,0x20,0xe0,0x03,0x7f,0x00,0x22,0x7f,0x01,0x22,0x8f,0x1f,0xe4,
++0x90,0x91,0x22,0xf0,0xe5,0x1f,0x14,0xfe,0x90,0x91,0x22,0xe0,0xff,0xc3,0x9e,0x50,
++0x0e,0xef,0x04,0xfd,0x12,0x34,0xb7,0x90,0x91,0x22,0xe0,0x04,0xf0,0x80,0xe5,0xe5,
++0x1f,0x14,0xff,0x7d,0xff,0x12,0x34,0xb7,0x90,0x91,0x22,0xe5,0x1f,0xf0,0x90,0x91,
++0x22,0xe0,0xc3,0x94,0xff,0x50,0x0f,0xe0,0xff,0x04,0xfd,0x12,0x34,0xb7,0x90,0x91,
++0x22,0xe0,0x04,0xf0,0x80,0xe8,0xad,0x1f,0x7f,0xff,0x02,0x34,0xb7,0xc3,0xee,0x94,
++0x01,0x40,0x0a,0x0d,0xed,0x13,0x90,0xfd,0x10,0xf0,0xe4,0x2f,0xff,0x22,0xc3,0xee,
++0x94,0x01,0x40,0x1e,0x90,0xfd,0x11,0xe0,0xb5,0x05,0x14,0x90,0x01,0x17,0xe0,0xb5,
++0x05,0x07,0x90,0xfd,0x11,0xe4,0xf0,0x80,0x06,0xed,0x04,0x90,0xfd,0x11,0xf0,0xe4,
++0x2f,0xff,0x22,0x00,0x18,0x58,};
++
++
++
++
++
++
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/rtl8192cu_led.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/rtl8192cu_led.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/rtl8192cu_led.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/rtl8192cu_led.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,2675 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++
++#include "drv_types.h"
++#include "rtl8192c_hal.h"
++
++//================================================================================
++//	Constant.
++//================================================================================
++
++//
++// Default LED behavior.
++//
++#define LED_BLINK_NORMAL_INTERVAL	100
++#define LED_BLINK_SLOWLY_INTERVAL	200
++#define LED_BLINK_LONG_INTERVAL	400
++
++#define LED_BLINK_NO_LINK_INTERVAL_ALPHA		1000
++#define LED_BLINK_LINK_INTERVAL_ALPHA			500		//500
++#define LED_BLINK_SCAN_INTERVAL_ALPHA		180 	//150
++#define LED_BLINK_FASTER_INTERVAL_ALPHA		50
++#define LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA	5000
++
++//================================================================================
++// LED object.
++//================================================================================
++
++
++//================================================================================
++//	Prototype of protected function.
++//================================================================================
++
++
++static void
++BlinkTimerCallback(
++	unsigned long data
++	);
++
++static void
++BlinkWorkItemCallback(
++	struct work_struct *work
++	);
++
++//
++//	Description:
++//		Reset blinking status of LED_871x object.
++//
++static void
++ResetLedStatus(PLED_871x	pLed) {
++	pLed->CurrLedState = RTW_LED_OFF; // Current LED state.
++	pLed->bLedOn = _FALSE; // true if LED is ON, false if LED is OFF.
++	
++	pLed->bLedBlinkInProgress = _FALSE; // true if it is blinking, false o.w..
++	pLed->bLedNoLinkBlinkInProgress = _FALSE;
++	pLed->bLedLinkBlinkInProgress = _FALSE;
++	pLed->bLedStartToLinkBlinkInProgress = _FALSE;
++	pLed->bLedScanBlinkInProgress = _FALSE;
++	pLed->bLedWPSBlinkInProgress = _FALSE;
++	pLed->BlinkTimes = 0; // Number of times to toggle led state for blinking.
++	pLed->BlinkingLedState = LED_UNKNOWN; // Next state for blinking, either RTW_LED_ON or RTW_LED_OFF are.
++}
++
++//================================================================================
++// LED_819xUsb routines. 
++//================================================================================
++
++//
++//	Description:
++//		Initialize an LED_871x object.
++//
++static void
++InitLed871x(
++	_adapter			*padapter,
++	PLED_871x		pLed,
++	LED_PIN_871x	LedPin
++	)
++{
++	pLed->padapter = padapter;
++	pLed->LedPin = LedPin;
++
++	ResetLedStatus(pLed);
++
++	_init_timer(&(pLed->BlinkTimer), padapter->pnetdev, BlinkTimerCallback, pLed);
++	_init_workitem(&(pLed->BlinkWorkItem), BlinkWorkItemCallback, pLed);
++}
++
++
++//
++//	Description:
++//		DeInitialize an LED_871x object.
++//
++static void
++DeInitLed871x(
++	PLED_871x			pLed
++	)
++{
++	//call _cancel_workitem_sync(&(pLed->BlinkWorkItem)) 
++    //before _cancel_timer_ex(&(pLed->BlinkTimer)) to 
++    //avoid led timer restarting when driver is removed
++
++	_cancel_workitem_sync(&(pLed->BlinkWorkItem));
++	
++	_cancel_timer_ex(&(pLed->BlinkTimer));
++	
++	// We should reset bLedBlinkInProgress if we cancel the LedControlTimer, 2005.03.10, by rcnjko.
++	ResetLedStatus(pLed);
++}
++
++//
++//	Description:
++//		Turn on LED according to LedPin specified.
++//
++static void
++SwLedOn(
++	_adapter			*padapter, 
++	PLED_871x		pLed
++)
++{
++	u8	LedCfg;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++
++	if( (padapter->bSurpriseRemoved == _TRUE) || ( padapter->bDriverStopped == _TRUE))
++	{
++		return;
++	}
++
++	if( 	(BOARD_MINICARD == pHalData->BoardType )||
++		(BOARD_USB_SOLO == pHalData->BoardType)||
++		(BOARD_USB_COMBO == pHalData->BoardType))
++	{
++		LedCfg = rtw_read8(padapter, REG_LEDCFG2);
++		switch(pLed->LedPin)
++		{	
++			case LED_PIN_GPIO0:
++				break;
++
++			case LED_PIN_LED0:
++				rtw_write8(padapter, REG_LEDCFG2, (LedCfg&0xf0)|BIT5|BIT6); // SW control led0 on.
++				break;
++
++			case LED_PIN_LED1:
++				rtw_write8(padapter, REG_LEDCFG2, (LedCfg&0x0f)|BIT5); // SW control led1 on.
++				break;
++
++			default:
++				break;
++	
++		}
++	}
++	else
++	{	
++		switch(pLed->LedPin)
++		{
++			case LED_PIN_GPIO0:
++				break;
++
++			case LED_PIN_LED0:
++#ifdef CONFIG_SW_ANTENNA_DIVERSITY
++				if(pHalData->AntDivCfg)
++				{
++					LedCfg = rtw_read8(padapter, REG_LEDCFG2);
++					rtw_write8(padapter, REG_LEDCFG2, (LedCfg&0xe0)|BIT7|BIT6|BIT5); // SW control led0 on.
++					//RT_TRACE(COMP_LED, DBG_LOUD, ("SwLedOn LED0 0x%x\n", PlatformEFIORead4Byte(Adapter, REG_LEDCFG2)));
++				}
++				else
++#endif
++				{
++					LedCfg = rtw_read8(padapter, REG_LEDCFG0);
++					rtw_write8(padapter,REG_LEDCFG0, LedCfg&0x70); // SW control led0 on.
++					//RT_TRACE(COMP_LED, DBG_LOUD, ("SwLedOn LED0 0x%lx\n", PlatformEFIORead4Byte(Adapter, REG_LEDCFG0)));
++				}
++				break;
++
++			case LED_PIN_LED1:
++				LedCfg = rtw_read8(padapter,(REG_LEDCFG1));
++				rtw_write8(padapter,(REG_LEDCFG1), LedCfg&0x70); // SW control led1 on.
++				//RT_TRACE(COMP_LED, DBG_LOUD, ("SwLedOn LED1 0x%lx\n", PlatformEFIORead4Byte(Adapter, REG_LEDCFG0)));
++			
++				break;
++
++			default:
++				break;
++		}
++	}
++	pLed->bLedOn = _TRUE;
++	
++}
++
++
++//
++//	Description:
++//		Turn off LED according to LedPin specified.
++//
++static void
++SwLedOff(
++	_adapter			*padapter, 
++	PLED_871x		pLed
++)
++{
++	u8	LedCfg;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++
++	if((padapter->bSurpriseRemoved == _TRUE) || ( padapter->bDriverStopped == _TRUE))	
++	{
++		goto exit;
++	}
++
++	if( 	(BOARD_MINICARD == pHalData->BoardType )||
++		(BOARD_USB_SOLO == pHalData->BoardType)||
++		(BOARD_USB_COMBO == pHalData->BoardType))
++	{
++		LedCfg = rtw_read8(padapter, REG_LEDCFG2);//0x4E
++
++		switch(pLed->LedPin)
++		{
++
++			case LED_PIN_GPIO0:
++				break;
++
++			case LED_PIN_LED0:
++				if(BOARD_USB_COMBO == pHalData->BoardType)
++				{
++					LedCfg &= 0x90; // Set to software control.				
++					rtw_write8(padapter, REG_LEDCFG2, (LedCfg|BIT3));				
++					LedCfg = rtw_read8(padapter, REG_MAC_PINMUX_CFG);
++					LedCfg &= 0xFE;
++					rtw_write8(padapter, REG_MAC_PINMUX_CFG, LedCfg);									
++				}
++				else
++				{
++					LedCfg &= 0xf0; // Set to software control.
++					if(pHalData->bLedOpenDrain == _TRUE) // Open-drain arrangement for controlling the LED
++						rtw_write8(padapter, REG_LEDCFG2, (LedCfg|BIT1|BIT5|BIT6));
++					else
++						rtw_write8(padapter, REG_LEDCFG2, (LedCfg|BIT3|BIT5|BIT6));
++				}
++				break;
++
++			case LED_PIN_LED1:
++				LedCfg &= 0x0f; // Set to software control.
++				rtw_write8(padapter, REG_LEDCFG2, (LedCfg|BIT3));
++				break;
++
++			default:
++				break;
++		}
++	}
++	else
++	{
++		switch(pLed->LedPin)
++		{
++			case LED_PIN_GPIO0:
++				break;
++
++			case LED_PIN_LED0:
++#ifdef CONFIG_SW_ANTENNA_DIVERSITY
++				if(pHalData->AntDivCfg)
++				{
++					LedCfg = rtw_read8(padapter, REG_LEDCFG2);
++					LedCfg &= 0xe0; // Set to software control. 			
++					rtw_write8(padapter, REG_LEDCFG2, (LedCfg|BIT3|BIT7|BIT6|BIT5));
++					//RT_TRACE(COMP_LED, DBG_LOUD, ("SwLedOff LED0 0x%x\n", PlatformEFIORead4Byte(Adapter, REG_LEDCFG2)));
++				}
++				else
++#endif
++				{
++					LedCfg = rtw_read8(padapter, REG_LEDCFG0);
++					LedCfg &= 0x70; // Set to software control. 			
++					rtw_write8(padapter, REG_LEDCFG0, (LedCfg|BIT3));
++					//RT_TRACE(COMP_LED, DBG_LOUD, ("SwLedOff LED0 0x%lx\n", PlatformEFIORead4Byte(Adapter, REG_LEDCFG0)));
++				}
++				break;
++
++			case LED_PIN_LED1:
++				LedCfg = rtw_read8(padapter, (REG_LEDCFG1));
++				LedCfg &= 0x70; // Set to software control.
++				rtw_write8(padapter,  (REG_LEDCFG1), (LedCfg|BIT3));
++				//RT_TRACE(COMP_LED, DBG_LOUD, ("SwLedOff LED1 0x%lx\n", PlatformEFIORead4Byte(Adapter, REG_LEDCFG0)));
++				break;
++
++			default:
++				break;
++		}
++	}
++
++exit:
++	pLed->bLedOn = _FALSE;
++	
++}
++
++//================================================================================
++// Interface to manipulate LED objects.
++//================================================================================
++
++
++//
++//	Description:
++//		Implementation of LED blinking behavior.
++//		It toggle off LED and schedule corresponding timer if necessary.
++//
++static void
++SwLedBlink(
++	PLED_871x			pLed
++	)
++{
++	_adapter			*padapter = pLed->padapter;
++	struct mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
++	u8				bStopBlinking = _FALSE;
++
++	// Change LED according to BlinkingLedState specified.
++	if( pLed->BlinkingLedState == RTW_LED_ON ) 
++	{
++		SwLedOn(padapter, pLed);
++		RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (%d): turn on\n", pLed->BlinkTimes));
++	}
++	else 
++	{
++		SwLedOff(padapter, pLed);
++		RT_TRACE(_module_rtl8712_led_c_,_drv_info_,( "Blinktimes (%d): turn off\n", pLed->BlinkTimes));
++	}
++
++	// Determine if we shall change LED state again.
++	pLed->BlinkTimes--;
++	switch(pLed->CurrLedState)
++	{
++
++	case LED_BLINK_NORMAL: 
++		if(pLed->BlinkTimes == 0)
++		{
++			bStopBlinking = _TRUE;
++		}
++		break;
++		
++	case LED_BLINK_StartToBlink:
++		if( check_fwstate(pmlmepriv, _FW_LINKED) && check_fwstate(pmlmepriv, WIFI_STATION_STATE) )
++		{
++			bStopBlinking = _TRUE;
++		}
++		if( check_fwstate(pmlmepriv, _FW_LINKED) &&
++			(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) || check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE)) )
++		{
++			bStopBlinking = _TRUE;
++		}
++		else if(pLed->BlinkTimes == 0)
++		{
++			bStopBlinking = _TRUE;
++		}
++		break;
++
++	case LED_BLINK_WPS:
++		if( pLed->BlinkTimes == 0 )
++		{
++			bStopBlinking = _TRUE;
++		}
++		break;
++
++
++	default:
++		bStopBlinking = _TRUE;
++		break;
++			
++	}
++	
++	if(bStopBlinking)
++	{
++		//if( padapter->pwrctrlpriv.cpwm >= PS_STATE_S2)
++		if(0)
++		{
++			SwLedOff(padapter, pLed);
++		}
++		else if( (check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) && (pLed->bLedOn == _FALSE))
++		{
++			SwLedOn(padapter, pLed);
++		}
++		else if( (check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) &&  pLed->bLedOn == _TRUE)
++		{
++			SwLedOff(padapter, pLed);
++		}
++
++		pLed->BlinkTimes = 0;
++		pLed->bLedBlinkInProgress = _FALSE;
++	}
++	else
++	{
++		// Assign LED state to toggle.
++		if( pLed->BlinkingLedState == RTW_LED_ON ) 
++			pLed->BlinkingLedState = RTW_LED_OFF;
++		else 
++			pLed->BlinkingLedState = RTW_LED_ON;
++
++		// Schedule a timer to toggle LED state. 
++		switch( pLed->CurrLedState )
++		{
++		case LED_BLINK_NORMAL:
++			_set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL);
++			break;
++		
++		case LED_BLINK_SLOWLY:
++		case LED_BLINK_StartToBlink:
++			_set_timer(&(pLed->BlinkTimer), LED_BLINK_SLOWLY_INTERVAL);
++			break;
++
++		case LED_BLINK_WPS:
++			{
++				if( pLed->BlinkingLedState == RTW_LED_ON )
++					_set_timer(&(pLed->BlinkTimer), LED_BLINK_LONG_INTERVAL);
++				else
++					_set_timer(&(pLed->BlinkTimer), LED_BLINK_LONG_INTERVAL);
++			}
++			break;
++
++		default:
++			_set_timer(&(pLed->BlinkTimer), LED_BLINK_SLOWLY_INTERVAL);
++			break;
++		}
++	}
++}
++
++
++static void
++SwLedBlink1(
++	PLED_871x			pLed
++	)
++{
++	_adapter				*padapter = pLed->padapter;
++	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(padapter);
++	struct led_priv		*ledpriv = &(padapter->ledpriv);
++	struct mlme_priv		*pmlmepriv = &(padapter->mlmepriv);
++	PLED_871x 			pLed1 = &(ledpriv->SwLed1);	
++	u8					bStopBlinking = _FALSE;
++
++	if(pHalData->EEPROMCustomerID == RT_CID_819x_CAMEO)
++		pLed = &(ledpriv->SwLed1);	
++
++	// Change LED according to BlinkingLedState specified.
++	if( pLed->BlinkingLedState == RTW_LED_ON ) 
++	{
++		SwLedOn(padapter, pLed);
++		RT_TRACE(_module_rtl8712_led_c_,_drv_info_,( "Blinktimes (%d): turn on\n", pLed->BlinkTimes));
++	}
++	else 
++	{
++		SwLedOff(padapter, pLed);
++		RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (%d): turn off\n", pLed->BlinkTimes));
++	}
++
++
++	if(pHalData->EEPROMCustomerID == RT_CID_DEFAULT)
++	{
++		if(check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE)
++		{
++			if(!pLed1->bSWLedCtrl)
++			{
++				SwLedOn(padapter, pLed1); 	
++				pLed1->bSWLedCtrl = _TRUE;
++			}
++			else if(!pLed1->bLedOn)	
++				SwLedOn(padapter, pLed1);
++			RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (): turn on pLed1\n"));
++		}
++		else 
++		{
++			if(!pLed1->bSWLedCtrl)
++			{
++				SwLedOff(padapter, pLed1);
++				pLed1->bSWLedCtrl = _TRUE;
++			}
++			else if(pLed1->bLedOn)
++				SwLedOff(padapter, pLed1);
++			RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (): turn off pLed1\n"));		
++		}
++	}
++
++
++	if( padapter->pwrctrlpriv.rf_pwrstate != rf_on )
++	{
++		SwLedOff(padapter, pLed);
++		ResetLedStatus(pLed);
++		return;
++	}
++				
++
++	switch(pLed->CurrLedState)
++	{
++		case LED_BLINK_SLOWLY:			
++			if( pLed->bLedOn )
++				pLed->BlinkingLedState = RTW_LED_OFF; 
++			else
++				pLed->BlinkingLedState = RTW_LED_ON;
++			_set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA);
++			break;
++
++		case LED_BLINK_NORMAL:
++			if( pLed->bLedOn )
++				pLed->BlinkingLedState = RTW_LED_OFF; 
++			else
++				pLed->BlinkingLedState = RTW_LED_ON;
++			_set_timer(&(pLed->BlinkTimer), LED_BLINK_LINK_INTERVAL_ALPHA);
++			break;
++			
++		case LED_SCAN_BLINK:
++			pLed->BlinkTimes--;
++			if( pLed->BlinkTimes == 0 )
++			{
++				bStopBlinking = _TRUE;
++			}
++			
++			if(bStopBlinking)
++			{
++				if(check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE)
++				{
++					pLed->bLedLinkBlinkInProgress = _TRUE;
++					pLed->CurrLedState = LED_BLINK_NORMAL;
++					if( pLed->bLedOn )
++						pLed->BlinkingLedState = RTW_LED_OFF; 
++					else
++						pLed->BlinkingLedState = RTW_LED_ON;
++					_set_timer(&(pLed->BlinkTimer), LED_BLINK_LINK_INTERVAL_ALPHA);
++					RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState));
++					
++				}
++				else if(check_fwstate(pmlmepriv, _FW_LINKED)== _FALSE)
++				{
++					pLed->bLedNoLinkBlinkInProgress = _TRUE;
++					pLed->CurrLedState = LED_BLINK_SLOWLY;
++					if( pLed->bLedOn )
++						pLed->BlinkingLedState = RTW_LED_OFF; 
++					else
++						pLed->BlinkingLedState = RTW_LED_ON;
++					_set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA);
++					RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState));					
++				}
++				pLed->bLedScanBlinkInProgress = _FALSE;
++			}
++			else
++			{
++				if( pLed->bLedOn )
++					pLed->BlinkingLedState = RTW_LED_OFF;
++				else
++					pLed->BlinkingLedState = RTW_LED_ON;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
++			}
++			break;
++
++		case LED_TXRX_BLINK:
++			pLed->BlinkTimes--;
++			if( pLed->BlinkTimes == 0 )
++			{
++				bStopBlinking = _TRUE;
++			}
++			if(bStopBlinking)
++			{
++				if(check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE)
++				{
++					pLed->bLedLinkBlinkInProgress = _TRUE;
++					pLed->CurrLedState = LED_BLINK_NORMAL;
++					if( pLed->bLedOn )
++						pLed->BlinkingLedState = RTW_LED_OFF;
++					else
++						pLed->BlinkingLedState = RTW_LED_ON;
++					_set_timer(&(pLed->BlinkTimer), LED_BLINK_LINK_INTERVAL_ALPHA);
++					RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState));					
++				}
++				else if(check_fwstate(pmlmepriv, _FW_LINKED)== _FALSE)
++				{
++					pLed->bLedNoLinkBlinkInProgress = _TRUE;
++					pLed->CurrLedState = LED_BLINK_SLOWLY;
++					if( pLed->bLedOn )
++						pLed->BlinkingLedState = RTW_LED_OFF; 
++					else
++						pLed->BlinkingLedState = RTW_LED_ON;
++					_set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA);
++					RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState));					
++				}
++				pLed->BlinkTimes = 0;
++				pLed->bLedBlinkInProgress = _FALSE;	
++			}
++			else
++			{
++				if( pLed->bLedOn )
++					pLed->BlinkingLedState = RTW_LED_OFF; 
++				else
++					pLed->BlinkingLedState = RTW_LED_ON;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA);
++			}
++			break;
++
++		case LED_BLINK_WPS:
++			if( pLed->bLedOn )
++				pLed->BlinkingLedState = RTW_LED_OFF; 
++			else
++				pLed->BlinkingLedState = RTW_LED_ON;
++			_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
++			break;
++
++		case LED_BLINK_WPS_STOP:	//WPS success
++			if(pLed->BlinkingLedState == RTW_LED_ON)
++				bStopBlinking = _FALSE;
++			else
++				bStopBlinking = _TRUE;				
++
++			if(bStopBlinking)
++			{
++				pLed->bLedLinkBlinkInProgress = _TRUE;
++				pLed->CurrLedState = LED_BLINK_NORMAL;
++				if( pLed->bLedOn )
++					pLed->BlinkingLedState = RTW_LED_OFF; 
++				else
++					pLed->BlinkingLedState = RTW_LED_ON;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_LINK_INTERVAL_ALPHA);
++				RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState));
++					
++				pLed->bLedWPSBlinkInProgress = _FALSE;	
++			}
++			else
++			{
++				pLed->BlinkingLedState = RTW_LED_OFF;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA);
++			}
++			break;
++					
++		default:
++			break;
++	}
++
++}
++
++static void
++SwLedBlink2(
++	PLED_871x			pLed
++	)
++{
++	_adapter				*padapter = pLed->padapter;
++	struct mlme_priv		*pmlmepriv = &(padapter->mlmepriv);
++	u8					bStopBlinking = _FALSE;
++
++	// Change LED according to BlinkingLedState specified.
++	if( pLed->BlinkingLedState == RTW_LED_ON) 
++	{
++		SwLedOn(padapter, pLed);
++		RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (%d): turn on\n", pLed->BlinkTimes));
++	}
++	else 
++	{
++		SwLedOff(padapter, pLed);
++		RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (%d): turn off\n", pLed->BlinkTimes));
++	}
++
++	switch(pLed->CurrLedState)
++	{	
++		case LED_SCAN_BLINK:
++			pLed->BlinkTimes--;
++			if( pLed->BlinkTimes == 0 )
++			{
++				bStopBlinking = _TRUE;
++			}
++			
++			if(bStopBlinking)
++			{
++				if( padapter->pwrctrlpriv.rf_pwrstate != rf_on )
++				{
++					SwLedOff(padapter, pLed);
++				}
++				else if(check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE)
++				{
++					pLed->CurrLedState = RTW_LED_ON;
++					pLed->BlinkingLedState = RTW_LED_ON; 
++					SwLedOn(padapter, pLed);
++					RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("stop scan blink CurrLedState %d\n", pLed->CurrLedState));
++					
++				}
++				else if(check_fwstate(pmlmepriv, _FW_LINKED)== _FALSE)
++				{
++					pLed->CurrLedState = RTW_LED_OFF;
++					pLed->BlinkingLedState = RTW_LED_OFF; 
++					SwLedOff(padapter, pLed);
++					RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("stop scan blink CurrLedState %d\n", pLed->CurrLedState));					
++				}
++				pLed->bLedScanBlinkInProgress = _FALSE;
++			}
++			else
++			{
++				if( padapter->pwrctrlpriv.rf_pwrstate != rf_on )
++				{
++					SwLedOff(padapter, pLed);
++				}
++				else
++				{
++					 if( pLed->bLedOn )
++						pLed->BlinkingLedState = RTW_LED_OFF; 
++					else
++						pLed->BlinkingLedState = RTW_LED_ON;
++					_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
++				}
++			}
++			break;
++
++		case LED_TXRX_BLINK:
++			pLed->BlinkTimes--;
++			if( pLed->BlinkTimes == 0 )
++			{
++				bStopBlinking = _TRUE;
++			}
++			if(bStopBlinking)
++			{
++				if( padapter->pwrctrlpriv.rf_pwrstate != rf_on )
++				{
++					SwLedOff(padapter, pLed);
++				}
++				else if(check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE)
++				{
++					pLed->CurrLedState = RTW_LED_ON;
++					pLed->BlinkingLedState = RTW_LED_ON; 
++					SwLedOn(padapter, pLed);
++					RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("stop CurrLedState %d\n", pLed->CurrLedState));
++					
++				}
++				else if(check_fwstate(pmlmepriv, _FW_LINKED)== _FALSE)
++				{
++					pLed->CurrLedState = RTW_LED_OFF;
++					pLed->BlinkingLedState = RTW_LED_OFF; 
++					SwLedOff(padapter, pLed);
++					RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("stop CurrLedState %d\n", pLed->CurrLedState));					
++				}
++				pLed->bLedBlinkInProgress = _FALSE;
++			}
++			else
++			{
++				if( padapter->pwrctrlpriv.rf_pwrstate != rf_on )
++				{
++					SwLedOff(padapter, pLed);
++				}
++				else
++				{
++					 if( pLed->bLedOn )
++						pLed->BlinkingLedState = RTW_LED_OFF; 
++					else
++						pLed->BlinkingLedState = RTW_LED_ON;
++					_set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA);
++				}
++			}
++			break;
++					
++		default:
++			break;
++	}
++
++}
++
++static void
++SwLedBlink3(
++	PLED_871x			pLed
++	)
++{
++	_adapter			*padapter = pLed->padapter;
++	struct mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
++	u8				bStopBlinking = _FALSE;
++
++	// Change LED according to BlinkingLedState specified.
++	if( pLed->BlinkingLedState == RTW_LED_ON ) 
++	{
++		SwLedOn(padapter, pLed);
++		RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (%d): turn on\n", pLed->BlinkTimes));
++	}
++	else 
++	{
++		if(pLed->CurrLedState != LED_BLINK_WPS_STOP)
++			SwLedOff(padapter, pLed);
++		RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (%d): turn off\n", pLed->BlinkTimes));
++	}	
++
++	switch(pLed->CurrLedState)
++	{			
++		case LED_SCAN_BLINK:
++			pLed->BlinkTimes--;
++			if( pLed->BlinkTimes == 0 )
++			{
++				bStopBlinking = _TRUE;
++			}
++			
++			if(bStopBlinking)
++			{
++				if( padapter->pwrctrlpriv.rf_pwrstate != rf_on )
++				{
++					SwLedOff(padapter, pLed);
++				}
++				else if(check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE)
++				{
++					pLed->CurrLedState = RTW_LED_ON;
++					pLed->BlinkingLedState = RTW_LED_ON;				
++					if( !pLed->bLedOn )
++						SwLedOn(padapter, pLed);
++
++					RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState));					
++				}
++				else if(check_fwstate(pmlmepriv, _FW_LINKED)== _FALSE)
++				{
++					pLed->CurrLedState = RTW_LED_OFF;
++					pLed->BlinkingLedState = RTW_LED_OFF;									
++					if( pLed->bLedOn )
++						SwLedOff(padapter, pLed);
++
++					RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState));					
++				}
++				pLed->bLedScanBlinkInProgress = _FALSE;
++			}
++			else
++			{
++				if( padapter->pwrctrlpriv.rf_pwrstate != rf_on )
++				{
++					SwLedOff(padapter, pLed);
++				}
++				else
++				{
++				 	if( pLed->bLedOn )
++						pLed->BlinkingLedState = RTW_LED_OFF; 
++					else
++						pLed->BlinkingLedState = RTW_LED_ON;
++					_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
++				}
++			}
++			break;
++
++		case LED_TXRX_BLINK:
++			pLed->BlinkTimes--;
++			if( pLed->BlinkTimes == 0 )
++			{
++				bStopBlinking = _TRUE;
++			}
++			if(bStopBlinking)
++			{
++				if( padapter->pwrctrlpriv.rf_pwrstate != rf_on )
++				{
++					SwLedOff(padapter, pLed);
++				}
++				else if(check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE)
++				{
++					pLed->CurrLedState = RTW_LED_ON;
++					pLed->BlinkingLedState = RTW_LED_ON;
++				
++					if( !pLed->bLedOn )
++						SwLedOn(padapter, pLed);
++
++					RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState));					
++				}
++				else if(check_fwstate(pmlmepriv, _FW_LINKED)== _FALSE)
++				{
++					pLed->CurrLedState = RTW_LED_OFF;
++					pLed->BlinkingLedState = RTW_LED_OFF;					
++				
++					if( pLed->bLedOn )
++						SwLedOff(padapter, pLed);
++
++
++					RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState));					
++				}
++				pLed->bLedBlinkInProgress = _FALSE;	
++			}
++			else
++			{
++				if( padapter->pwrctrlpriv.rf_pwrstate != rf_on )
++				{
++					SwLedOff(padapter, pLed);
++				}
++				else
++				{
++					if( pLed->bLedOn )
++						pLed->BlinkingLedState = RTW_LED_OFF; 
++					else
++						pLed->BlinkingLedState = RTW_LED_ON;
++					_set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA);
++				}
++			}
++			break;
++
++		case LED_BLINK_WPS:
++			if( pLed->bLedOn )
++				pLed->BlinkingLedState = RTW_LED_OFF; 
++			else
++				pLed->BlinkingLedState = RTW_LED_ON;
++			_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
++			break;
++
++		case LED_BLINK_WPS_STOP:	//WPS success
++			if(pLed->BlinkingLedState == RTW_LED_ON)
++			{
++				pLed->BlinkingLedState = RTW_LED_OFF;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA);
++				bStopBlinking = _FALSE;
++			}
++			else
++			{
++				bStopBlinking = _TRUE;				
++			}
++			
++			if(bStopBlinking)
++			{
++				if( padapter->pwrctrlpriv.rf_pwrstate != rf_on )
++				{
++					SwLedOff(padapter, pLed);
++				}
++				else 
++				{
++					pLed->CurrLedState = RTW_LED_ON;
++					pLed->BlinkingLedState = RTW_LED_ON; 
++					SwLedOn(padapter, pLed);
++					RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState));					
++				}
++				pLed->bLedWPSBlinkInProgress = _FALSE;	
++			}		
++			break;
++			
++					
++		default:
++			break;
++	}
++
++}
++
++
++static void
++SwLedBlink4(
++	PLED_871x			pLed
++	)
++{
++	_adapter			*padapter = pLed->padapter;
++	struct led_priv	*ledpriv = &(padapter->ledpriv);
++	struct mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
++	PLED_871x 		pLed1 = &(ledpriv->SwLed1);	
++	u8				bStopBlinking = _FALSE;
++
++	// Change LED according to BlinkingLedState specified.
++	if( pLed->BlinkingLedState == RTW_LED_ON ) 
++	{
++		SwLedOn(padapter, pLed);
++		RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (%d): turn on\n", pLed->BlinkTimes));
++	}
++	else 
++	{
++		SwLedOff(padapter, pLed);
++		RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (%d): turn off\n", pLed->BlinkTimes));
++	}	
++
++	if(!pLed1->bLedWPSBlinkInProgress && pLed1->BlinkingLedState == LED_UNKNOWN)
++	{
++		pLed1->BlinkingLedState = RTW_LED_OFF;
++		pLed1->CurrLedState = RTW_LED_OFF;
++		SwLedOff(padapter, pLed1);
++	}	
++
++	switch(pLed->CurrLedState)
++	{
++		case LED_BLINK_SLOWLY:			
++			if( pLed->bLedOn )
++				pLed->BlinkingLedState = RTW_LED_OFF; 
++			else
++				pLed->BlinkingLedState = RTW_LED_ON;
++			_set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA);
++			break;
++
++		case LED_BLINK_StartToBlink:
++			if( pLed->bLedOn )
++			{
++				pLed->BlinkingLedState = RTW_LED_OFF;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_SLOWLY_INTERVAL);
++			}
++			else
++			{
++				pLed->BlinkingLedState = RTW_LED_ON;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL);
++			}
++			break;			
++			
++		case LED_SCAN_BLINK:
++			pLed->BlinkTimes--;
++			if( pLed->BlinkTimes == 0 )
++			{
++				bStopBlinking = _FALSE;
++			}
++			
++			if(bStopBlinking)
++			{
++				if( padapter->pwrctrlpriv.rf_pwrstate != rf_on && padapter->pwrctrlpriv.rfoff_reason > RF_CHANGE_BY_PS)
++				{
++					SwLedOff(padapter, pLed);
++				}
++				else 
++				{
++					pLed->bLedNoLinkBlinkInProgress = _FALSE;
++					pLed->CurrLedState = LED_BLINK_SLOWLY;
++					if( pLed->bLedOn )
++						pLed->BlinkingLedState = RTW_LED_OFF; 
++					else
++						pLed->BlinkingLedState = RTW_LED_ON;
++					_set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA);
++				}
++				pLed->bLedScanBlinkInProgress = _FALSE;
++			}
++			else
++			{
++				if( padapter->pwrctrlpriv.rf_pwrstate != rf_on && padapter->pwrctrlpriv.rfoff_reason > RF_CHANGE_BY_PS)
++				{
++					SwLedOff(padapter, pLed);
++				}
++				else
++				{
++					 if( pLed->bLedOn )
++						pLed->BlinkingLedState = RTW_LED_OFF; 
++					else
++						pLed->BlinkingLedState = RTW_LED_ON;
++					_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
++				}
++			}
++			break;
++
++		case LED_TXRX_BLINK:
++			pLed->BlinkTimes--;
++			if( pLed->BlinkTimes == 0 )
++			{
++				bStopBlinking = _TRUE;
++			}
++			if(bStopBlinking)
++			{
++				if( padapter->pwrctrlpriv.rf_pwrstate != rf_on && padapter->pwrctrlpriv.rfoff_reason > RF_CHANGE_BY_PS)
++				{
++					SwLedOff(padapter, pLed);
++				}
++				else 
++				{
++					pLed->bLedNoLinkBlinkInProgress = _TRUE;
++					pLed->CurrLedState = LED_BLINK_SLOWLY;
++					if( pLed->bLedOn )
++						pLed->BlinkingLedState = RTW_LED_OFF; 
++					else
++						pLed->BlinkingLedState = RTW_LED_ON;
++					_set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA);
++				}
++				pLed->bLedBlinkInProgress = _FALSE;	
++			}
++			else
++			{
++				if( padapter->pwrctrlpriv.rf_pwrstate != rf_on && padapter->pwrctrlpriv.rfoff_reason > RF_CHANGE_BY_PS)
++				{
++					SwLedOff(padapter, pLed);
++				}
++				else
++				{
++					 if( pLed->bLedOn )
++						pLed->BlinkingLedState = RTW_LED_OFF; 
++					else
++						pLed->BlinkingLedState = RTW_LED_ON;
++					_set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA);
++				}
++			}
++			break;
++
++		case LED_BLINK_WPS:
++			if( pLed->bLedOn )
++			{
++				pLed->BlinkingLedState = RTW_LED_OFF;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_SLOWLY_INTERVAL);
++			}
++			else
++			{
++				pLed->BlinkingLedState = RTW_LED_ON;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL);
++			}
++			break;
++
++		case LED_BLINK_WPS_STOP:	//WPS authentication fail
++			if( pLed->bLedOn )			
++				pLed->BlinkingLedState = RTW_LED_OFF; 			
++			else			
++				pLed->BlinkingLedState = RTW_LED_ON;
++
++			_set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL);
++			break;
++
++		case LED_BLINK_WPS_STOP_OVERLAP:	//WPS session overlap		
++			pLed->BlinkTimes--;
++			if(pLed->BlinkTimes == 0)
++			{
++				if(pLed->bLedOn)
++				{
++					pLed->BlinkTimes = 1;							
++				}
++				else
++				{
++					bStopBlinking = _TRUE;
++				}
++			}
++
++			if(bStopBlinking)
++			{				
++				pLed->BlinkTimes = 10;			
++				pLed->BlinkingLedState = RTW_LED_ON;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_LINK_INTERVAL_ALPHA);
++			}
++			else
++			{
++				if( pLed->bLedOn )			
++					pLed->BlinkingLedState = RTW_LED_OFF;			
++				else			
++					pLed->BlinkingLedState = RTW_LED_ON;
++
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL);
++			}
++			break;
++
++					
++		default:
++			break;
++	}
++
++	RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("SwLedBlink4 CurrLedState %d\n", pLed->CurrLedState));
++
++
++}
++
++static void
++SwLedBlink5(
++	PLED_871x			pLed
++	)
++{
++	_adapter			*padapter = pLed->padapter;
++	struct mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
++	u8				bStopBlinking = _FALSE;
++
++	// Change LED according to BlinkingLedState specified.
++	if( pLed->BlinkingLedState == RTW_LED_ON ) 
++	{
++		SwLedOn(padapter, pLed);
++		RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (%d): turn on\n", pLed->BlinkTimes));
++	}
++	else 
++	{
++		SwLedOff(padapter, pLed);
++		RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (%d): turn off\n", pLed->BlinkTimes));
++	}
++
++	switch(pLed->CurrLedState)
++	{
++		case LED_SCAN_BLINK:
++			pLed->BlinkTimes--;
++			if( pLed->BlinkTimes == 0 )
++			{
++				bStopBlinking = _TRUE;
++			}
++			
++			if(bStopBlinking)
++			{
++				if( padapter->pwrctrlpriv.rf_pwrstate != rf_on && padapter->pwrctrlpriv.rfoff_reason > RF_CHANGE_BY_PS)
++				{
++					pLed->CurrLedState = RTW_LED_OFF;
++					pLed->BlinkingLedState = RTW_LED_OFF; 									
++					if(pLed->bLedOn)				
++						SwLedOff(padapter, pLed);
++				}
++				else 
++				{		pLed->CurrLedState = RTW_LED_ON;
++						pLed->BlinkingLedState = RTW_LED_ON;					
++						if(!pLed->bLedOn)
++							_set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA);
++				}
++
++				pLed->bLedScanBlinkInProgress = _FALSE;
++			}
++			else
++			{
++				if( padapter->pwrctrlpriv.rf_pwrstate != rf_on && padapter->pwrctrlpriv.rfoff_reason > RF_CHANGE_BY_PS)
++				{
++					SwLedOff(padapter, pLed);
++				}
++				else
++				{
++					if( pLed->bLedOn )
++						pLed->BlinkingLedState = RTW_LED_OFF; 
++					else
++						pLed->BlinkingLedState = RTW_LED_ON;
++					_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
++				}
++			}
++			break;
++
++	
++		case LED_TXRX_BLINK:
++			pLed->BlinkTimes--;
++			if( pLed->BlinkTimes == 0 )
++			{
++				bStopBlinking = _TRUE;
++			}
++			
++			if(bStopBlinking)
++			{
++				if( padapter->pwrctrlpriv.rf_pwrstate != rf_on && padapter->pwrctrlpriv.rfoff_reason > RF_CHANGE_BY_PS)
++				{
++					pLed->CurrLedState = RTW_LED_OFF;
++					pLed->BlinkingLedState = RTW_LED_OFF; 									
++					if(pLed->bLedOn)
++						SwLedOff(padapter, pLed);
++				}
++				else
++				{
++					pLed->CurrLedState = RTW_LED_ON;
++					pLed->BlinkingLedState = RTW_LED_ON; 					
++					if(!pLed->bLedOn)
++						_set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA);
++				}
++
++				pLed->bLedBlinkInProgress = _FALSE;	
++			}
++			else
++			{
++				if( padapter->pwrctrlpriv.rf_pwrstate != rf_on && padapter->pwrctrlpriv.rfoff_reason > RF_CHANGE_BY_PS)
++				{
++					SwLedOff(padapter, pLed);
++				}
++				else
++				{
++					 if( pLed->bLedOn )
++						pLed->BlinkingLedState = RTW_LED_OFF; 
++					else
++						pLed->BlinkingLedState = RTW_LED_ON;
++					_set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA);
++				}
++			}
++			break;
++					
++		default:
++			break;
++	}
++
++	RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("SwLedBlink5 CurrLedState %d\n", pLed->CurrLedState));
++
++
++}
++
++static void
++SwLedBlink6(
++	PLED_871x			pLed
++	)
++{
++	_adapter			*padapter = pLed->padapter;
++	struct mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
++	u8				bStopBlinking = _FALSE;
++
++	// Change LED according to BlinkingLedState specified.
++	if( pLed->BlinkingLedState == RTW_LED_ON ) 
++	{
++		SwLedOn(padapter, pLed);
++		RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (%d): turn on\n", pLed->BlinkTimes));
++	}
++	else 
++	{
++		SwLedOff(padapter, pLed);
++		RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Blinktimes (%d): turn off\n", pLed->BlinkTimes));
++	}
++
++	RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("<==== blink6\n"));
++}
++
++
++//
++//	Description:
++//		Callback function of LED BlinkTimer, 
++//		it just schedules to corresponding BlinkWorkItem.
++//
++static void
++BlinkTimerCallback(
++	unsigned long data
++	)
++{
++	PLED_871x	 pLed = (PLED_871x)data;
++	_adapter		*padapter = pLed->padapter;
++
++	//DBG_871X("%s\n", __FUNCTION__);
++
++	if( (padapter->bSurpriseRemoved == _TRUE) || ( padapter->bDriverStopped == _TRUE))	
++	{
++		//DBG_871X("%s bSurpriseRemoved:%d, bDriverStopped:%d\n", __FUNCTION__, padapter->bSurpriseRemoved, padapter->bDriverStopped);
++		return;
++	}
++
++#ifdef CONFIG_LED_HANDLED_BY_CMD_THREAD
++	rtw_led_blink_cmd(padapter, pLed);
++#else
++	_set_workitem(&(pLed->BlinkWorkItem));
++#endif
++}
++
++//
++//	Description:
++//		Handler function of LED Blinking.
++//		We dispatch acture LED blink action according to LedStrategy.
++//
++void BlinkHandler(PLED_871x	 pLed)
++{
++	struct led_priv	*ledpriv = &(pLed->padapter->ledpriv);
++	_adapter		*padapter = pLed->padapter;
++
++	//DBG_871X("%s (%s:%d)\n",__FUNCTION__, current->comm, current->pid);
++
++	if( (padapter->bSurpriseRemoved == _TRUE) || ( padapter->bDriverStopped == _TRUE))	
++	{
++		//DBG_871X("%s bSurpriseRemoved:%d, bDriverStopped:%d\n", __FUNCTION__, padapter->bSurpriseRemoved, padapter->bDriverStopped);
++		return;
++	}
++
++	switch(ledpriv->LedStrategy)
++	{
++		case SW_LED_MODE0:
++			SwLedBlink(pLed);
++			break;
++		
++		case SW_LED_MODE1:
++			SwLedBlink1(pLed);
++			break;
++		
++		case SW_LED_MODE2:
++			SwLedBlink2(pLed);
++			break;
++			
++		case SW_LED_MODE3:
++			SwLedBlink3(pLed);
++			break;
++
++		case SW_LED_MODE4:
++			SwLedBlink4(pLed);
++			break;			
++
++		case SW_LED_MODE5:
++			SwLedBlink5(pLed);
++			break;
++
++		case SW_LED_MODE6:
++			SwLedBlink6(pLed);
++			break;
++
++		default:
++			//RT_TRACE(COMP_LED, DBG_LOUD, ("BlinkWorkItemCallback 0x%x \n", pHalData->LedStrategy));
++			//SwLedBlink(pLed);
++			break;
++	}
++}
++
++//
++//	Description:
++//		Callback function of LED BlinkWorkItem.
++//		We dispatch acture LED blink action according to LedStrategy.
++//
++static void BlinkWorkItemCallback(struct work_struct *work)
++{
++	PLED_871x	 pLed = container_of(work, LED_871x, BlinkWorkItem);
++	BlinkHandler(pLed);
++}
++
++
++
++//================================================================================
++// Default LED behavior.
++//================================================================================
++
++//
++//	Description:	
++//		Implement each led action for SW_LED_MODE0.
++//		This is default strategy.
++//
++static void
++SwLedControlMode0(
++	_adapter		*padapter,
++	LED_CTL_MODE		LedAction
++)
++{
++	struct led_priv	*ledpriv = &(padapter->ledpriv);
++	PLED_871x	pLed = &(ledpriv->SwLed1);
++
++	// Decide led state
++	switch(LedAction)
++	{
++	case LED_CTL_TX:
++	case LED_CTL_RX:
++		if( pLed->bLedBlinkInProgress == _FALSE )
++		{
++			pLed->bLedBlinkInProgress = _TRUE;
++
++			pLed->CurrLedState = LED_BLINK_NORMAL;
++			pLed->BlinkTimes = 2;
++
++			if( pLed->bLedOn )
++				pLed->BlinkingLedState = RTW_LED_OFF; 
++			else
++				pLed->BlinkingLedState = RTW_LED_ON;
++			_set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL);
++		}
++		break;
++
++	case LED_CTL_START_TO_LINK:
++		if( pLed->bLedBlinkInProgress == _FALSE )
++		{
++			pLed->bLedBlinkInProgress = _TRUE;
++
++			pLed->CurrLedState = LED_BLINK_StartToBlink;
++			pLed->BlinkTimes = 24;
++
++			if( pLed->bLedOn )
++				pLed->BlinkingLedState = RTW_LED_OFF; 
++			else
++				pLed->BlinkingLedState = RTW_LED_ON;
++			_set_timer(&(pLed->BlinkTimer), LED_BLINK_SLOWLY_INTERVAL);
++		}
++		else
++		{
++			pLed->CurrLedState = LED_BLINK_StartToBlink;
++		}	
++		break;
++		
++	case LED_CTL_LINK:
++		pLed->CurrLedState = RTW_LED_ON;
++		if( pLed->bLedBlinkInProgress == _FALSE )
++		{
++			SwLedOn(padapter, pLed);
++		}
++		break;
++
++	case LED_CTL_NO_LINK:
++		pLed->CurrLedState = RTW_LED_OFF;
++		if( pLed->bLedBlinkInProgress == _FALSE )
++		{
++			SwLedOff(padapter, pLed);
++		}
++		break;
++	
++	case LED_CTL_POWER_OFF:
++		pLed->CurrLedState = RTW_LED_OFF;
++		if(pLed->bLedBlinkInProgress)
++		{
++			_cancel_timer_ex(&(pLed->BlinkTimer));
++			pLed->bLedBlinkInProgress = _FALSE;
++		}
++		SwLedOff(padapter, pLed);
++		break;
++
++	case LED_CTL_START_WPS:
++		if( pLed->bLedBlinkInProgress == _FALSE || pLed->CurrLedState == RTW_LED_ON)
++		{
++			pLed->bLedBlinkInProgress = _TRUE;
++
++			pLed->CurrLedState = LED_BLINK_WPS;
++			pLed->BlinkTimes = 20;
++
++			if( pLed->bLedOn )
++			{
++				pLed->BlinkingLedState = RTW_LED_OFF;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_LONG_INTERVAL);
++			}
++			else
++			{
++				pLed->BlinkingLedState = RTW_LED_ON;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_LONG_INTERVAL);
++			}
++		}
++		break;
++
++	case LED_CTL_STOP_WPS:
++		if(pLed->bLedBlinkInProgress)
++		{
++			pLed->CurrLedState = RTW_LED_OFF;
++			_cancel_timer_ex(&(pLed->BlinkTimer));
++			pLed->bLedBlinkInProgress = _FALSE;
++		}
++		break;
++		
++
++	default:
++		break;
++	}
++	
++	RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Led %d\n", pLed->CurrLedState));
++	
++}
++
++ //ALPHA, added by chiyoko, 20090106
++static void
++SwLedControlMode1(
++	_adapter		*padapter,
++	LED_CTL_MODE		LedAction
++)
++{
++	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(padapter);
++	struct led_priv		*ledpriv = &(padapter->ledpriv);
++	PLED_871x			pLed = &(ledpriv->SwLed0);
++	struct mlme_priv		*pmlmepriv = &(padapter->mlmepriv);
++
++	if(pHalData->EEPROMCustomerID == RT_CID_819x_CAMEO)
++		pLed = &(ledpriv->SwLed1);
++	
++	switch(LedAction)
++	{		
++		case LED_CTL_POWER_ON:
++		case LED_CTL_START_TO_LINK:	
++		case LED_CTL_NO_LINK:
++			if( pLed->bLedNoLinkBlinkInProgress == _FALSE )
++			{
++				if(pLed->CurrLedState == LED_SCAN_BLINK || IS_LED_WPS_BLINKING(pLed))
++				{
++					return;
++				}
++				if( pLed->bLedLinkBlinkInProgress == _TRUE )
++				{
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					pLed->bLedLinkBlinkInProgress = _FALSE;
++				}
++	 			if(pLed->bLedBlinkInProgress ==_TRUE)
++				{	
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					pLed->bLedBlinkInProgress = _FALSE;
++	 			}
++				
++				pLed->bLedNoLinkBlinkInProgress = _TRUE;
++				pLed->CurrLedState = LED_BLINK_SLOWLY;
++				if( pLed->bLedOn )
++					pLed->BlinkingLedState = RTW_LED_OFF; 
++				else
++					pLed->BlinkingLedState = RTW_LED_ON;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA);
++			}
++			break;		
++
++		case LED_CTL_LINK:
++			if( pLed->bLedLinkBlinkInProgress == _FALSE )
++			{
++				if(pLed->CurrLedState == LED_SCAN_BLINK || IS_LED_WPS_BLINKING(pLed))
++				{
++					return;
++				}
++				if(pLed->bLedNoLinkBlinkInProgress == _TRUE)
++				{
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					pLed->bLedNoLinkBlinkInProgress = _FALSE;
++				}
++				if(pLed->bLedBlinkInProgress ==_TRUE)
++				{	
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					pLed->bLedBlinkInProgress = _FALSE;
++	 			}
++				pLed->bLedLinkBlinkInProgress = _TRUE;
++				pLed->CurrLedState = LED_BLINK_NORMAL;
++				if( pLed->bLedOn )
++					pLed->BlinkingLedState = RTW_LED_OFF; 
++				else
++					pLed->BlinkingLedState = RTW_LED_ON;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_LINK_INTERVAL_ALPHA);
++			}
++			break;
++
++		case LED_CTL_SITE_SURVEY:
++			 if((pmlmepriv->LinkDetectInfo.bBusyTraffic) && (check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE))
++			 	;
++			 else if(pLed->bLedScanBlinkInProgress ==_FALSE)
++			 {
++			 	if(IS_LED_WPS_BLINKING(pLed))
++					return;
++				
++	  			if(pLed->bLedNoLinkBlinkInProgress == _TRUE)
++				{
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					pLed->bLedNoLinkBlinkInProgress = _FALSE;
++				}
++				if( pLed->bLedLinkBlinkInProgress == _TRUE )
++				{
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					 pLed->bLedLinkBlinkInProgress = _FALSE;
++				}
++	 			if(pLed->bLedBlinkInProgress ==_TRUE)
++				{
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					pLed->bLedBlinkInProgress = _FALSE;
++				}
++				pLed->bLedScanBlinkInProgress = _TRUE;
++				pLed->CurrLedState = LED_SCAN_BLINK;
++				pLed->BlinkTimes = 24;
++				if( pLed->bLedOn )
++					pLed->BlinkingLedState = RTW_LED_OFF; 
++				else
++					pLed->BlinkingLedState = RTW_LED_ON;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
++			 }
++			break;
++		
++		case LED_CTL_TX:
++		case LED_CTL_RX:
++			if(pLed->bLedBlinkInProgress ==_FALSE)
++			{
++				if(pLed->CurrLedState == LED_SCAN_BLINK || IS_LED_WPS_BLINKING(pLed))
++				{
++					return;
++				}
++				if(pLed->bLedNoLinkBlinkInProgress == _TRUE)
++				{
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					pLed->bLedNoLinkBlinkInProgress = _FALSE;
++				}
++				if( pLed->bLedLinkBlinkInProgress == _TRUE )
++				{
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					pLed->bLedLinkBlinkInProgress = _FALSE;
++				}
++				pLed->bLedBlinkInProgress = _TRUE;
++				pLed->CurrLedState = LED_TXRX_BLINK;
++				pLed->BlinkTimes = 2;
++				if( pLed->bLedOn )
++					pLed->BlinkingLedState = RTW_LED_OFF; 
++				else
++					pLed->BlinkingLedState = RTW_LED_ON;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA);
++			}
++			break;
++
++		case LED_CTL_START_WPS: //wait until xinpin finish
++		case LED_CTL_START_WPS_BOTTON:
++			 if(pLed->bLedWPSBlinkInProgress ==_FALSE)
++			 {
++				if(pLed->bLedNoLinkBlinkInProgress == _TRUE)
++				{
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					pLed->bLedNoLinkBlinkInProgress = _FALSE;
++				}
++				if( pLed->bLedLinkBlinkInProgress == _TRUE )
++				{
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					 pLed->bLedLinkBlinkInProgress = _FALSE;
++				}
++				if(pLed->bLedBlinkInProgress ==_TRUE)
++				{
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					pLed->bLedBlinkInProgress = _FALSE;
++				}
++				if(pLed->bLedScanBlinkInProgress ==_TRUE)
++				{
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					pLed->bLedScanBlinkInProgress = _FALSE;
++				}				
++				pLed->bLedWPSBlinkInProgress = _TRUE;
++				pLed->CurrLedState = LED_BLINK_WPS;
++				if( pLed->bLedOn )
++					pLed->BlinkingLedState = RTW_LED_OFF; 
++				else
++					pLed->BlinkingLedState = RTW_LED_ON;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
++			 }
++			break;
++
++		
++		case LED_CTL_STOP_WPS:
++			if(pLed->bLedNoLinkBlinkInProgress == _TRUE)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedNoLinkBlinkInProgress = _FALSE;
++			}
++			if( pLed->bLedLinkBlinkInProgress == _TRUE )
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				 pLed->bLedLinkBlinkInProgress = _FALSE;
++			}
++			if(pLed->bLedBlinkInProgress ==_TRUE)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedBlinkInProgress = _FALSE;
++			}
++			if(pLed->bLedScanBlinkInProgress ==_TRUE)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedScanBlinkInProgress = _FALSE;
++			}			
++			if(pLed->bLedWPSBlinkInProgress)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++			}
++			else
++			{
++				pLed->bLedWPSBlinkInProgress = _TRUE;
++			}
++			
++			pLed->CurrLedState = LED_BLINK_WPS_STOP;
++			if(pLed->bLedOn)
++			{
++				pLed->BlinkingLedState = RTW_LED_OFF;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA);
++			}
++			else
++			{
++				pLed->BlinkingLedState = RTW_LED_ON;
++				_set_timer(&(pLed->BlinkTimer), 0);
++			}					
++			break;		
++
++		case LED_CTL_STOP_WPS_FAIL:			
++			if(pLed->bLedWPSBlinkInProgress)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedWPSBlinkInProgress = _FALSE;				
++			}			
++
++			pLed->bLedNoLinkBlinkInProgress = _TRUE;
++			pLed->CurrLedState = LED_BLINK_SLOWLY;
++			if( pLed->bLedOn )
++				pLed->BlinkingLedState = RTW_LED_OFF;
++			else
++				pLed->BlinkingLedState = RTW_LED_ON;
++			_set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA);
++			break;				
++
++		case LED_CTL_POWER_OFF:
++			pLed->CurrLedState = RTW_LED_OFF;
++			pLed->BlinkingLedState = RTW_LED_OFF; 
++			if( pLed->bLedNoLinkBlinkInProgress)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedNoLinkBlinkInProgress = _FALSE;
++			}
++			if( pLed->bLedLinkBlinkInProgress)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedLinkBlinkInProgress = _FALSE;
++			}
++			if( pLed->bLedBlinkInProgress)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedBlinkInProgress = _FALSE;
++			}
++			if( pLed->bLedWPSBlinkInProgress )
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedWPSBlinkInProgress = _FALSE;
++			}
++			if( pLed->bLedScanBlinkInProgress)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedScanBlinkInProgress = _FALSE;
++			}			
++
++			SwLedOff(padapter, pLed);
++			break;
++			
++		default:
++			break;
++
++	}
++
++	RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Led %d\n", pLed->CurrLedState));
++}
++
++ //Arcadyan/Sitecom , added by chiyoko, 20090216
++static void
++SwLedControlMode2(
++	_adapter				*padapter,
++	LED_CTL_MODE		LedAction
++)
++{
++	struct led_priv	*ledpriv = &(padapter->ledpriv);
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	PLED_871x 		pLed = &(ledpriv->SwLed0);
++	
++	switch(LedAction)
++	{		
++		case LED_CTL_SITE_SURVEY:
++			 if(pmlmepriv->LinkDetectInfo.bBusyTraffic)
++			 	;		 
++			 else if(pLed->bLedScanBlinkInProgress ==_FALSE)
++			 {
++			 	if(IS_LED_WPS_BLINKING(pLed))
++					return;
++			 
++	 			if(pLed->bLedBlinkInProgress ==_TRUE)
++				{
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					pLed->bLedBlinkInProgress = _FALSE;
++				}
++				pLed->bLedScanBlinkInProgress = _TRUE;
++				pLed->CurrLedState = LED_SCAN_BLINK;
++				pLed->BlinkTimes = 24;
++				if( pLed->bLedOn )
++					pLed->BlinkingLedState = RTW_LED_OFF; 
++				else
++					pLed->BlinkingLedState = RTW_LED_ON;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
++			 }
++			break;
++		
++		case LED_CTL_TX:
++		case LED_CTL_RX:
++	 		if((pLed->bLedBlinkInProgress ==_FALSE) && (check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE))
++	  		{
++	  		  	if(pLed->CurrLedState == LED_SCAN_BLINK || IS_LED_WPS_BLINKING(pLed))
++				{
++					return;
++				}
++
++				pLed->bLedBlinkInProgress = _TRUE;
++				pLed->CurrLedState = LED_TXRX_BLINK;
++				pLed->BlinkTimes = 2;
++				if( pLed->bLedOn )
++					pLed->BlinkingLedState = RTW_LED_OFF; 
++				else
++					pLed->BlinkingLedState = RTW_LED_ON;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA);
++			}
++			break;
++
++		case LED_CTL_LINK:
++			pLed->CurrLedState = RTW_LED_ON;
++			pLed->BlinkingLedState = RTW_LED_ON;
++			if( pLed->bLedBlinkInProgress)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedBlinkInProgress = _FALSE;
++			}
++			if( pLed->bLedScanBlinkInProgress)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedScanBlinkInProgress = _FALSE;
++			}			
++
++			_set_timer(&(pLed->BlinkTimer), 0);
++			break;			
++
++		case LED_CTL_START_WPS: //wait until xinpin finish
++		case LED_CTL_START_WPS_BOTTON:		
++			if(pLed->bLedWPSBlinkInProgress ==_FALSE)
++			{
++				if(pLed->bLedBlinkInProgress ==_TRUE)
++				{
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					pLed->bLedBlinkInProgress = _FALSE;
++				}
++				if(pLed->bLedScanBlinkInProgress ==_TRUE)
++				{
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					pLed->bLedScanBlinkInProgress = _FALSE;
++				}				
++				pLed->bLedWPSBlinkInProgress = _TRUE;
++				pLed->CurrLedState = RTW_LED_ON;
++				pLed->BlinkingLedState = RTW_LED_ON;
++				_set_timer(&(pLed->BlinkTimer), 0);
++			 }			
++			break;
++			
++		case LED_CTL_STOP_WPS:
++			pLed->bLedWPSBlinkInProgress = _FALSE;
++			if(padapter->pwrctrlpriv.rf_pwrstate != rf_on)
++			{
++				SwLedOff(padapter, pLed);
++			}
++			else
++			{
++				pLed->CurrLedState = RTW_LED_ON;
++				pLed->BlinkingLedState = RTW_LED_ON;
++				_set_timer(&(pLed->BlinkTimer), 0);
++				RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState));
++			}
++			break;
++			
++		case LED_CTL_STOP_WPS_FAIL:			
++			pLed->bLedWPSBlinkInProgress = _FALSE;			
++			if(padapter->pwrctrlpriv.rf_pwrstate != rf_on)
++			{
++				SwLedOff(padapter, pLed);
++			}
++			else 
++			{
++				pLed->CurrLedState = RTW_LED_OFF;
++				pLed->BlinkingLedState = RTW_LED_OFF;
++				_set_timer(&(pLed->BlinkTimer), 0);
++				RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState)); 				
++			}	
++			break;				
++
++		case LED_CTL_START_TO_LINK: 
++		case LED_CTL_NO_LINK:
++			if(!IS_LED_BLINKING(pLed))
++			{
++				pLed->CurrLedState = RTW_LED_OFF;
++				pLed->BlinkingLedState = RTW_LED_OFF;
++				_set_timer(&(pLed->BlinkTimer), 0);
++			}
++			break;
++			
++		case LED_CTL_POWER_OFF:
++			pLed->CurrLedState = RTW_LED_OFF;
++			pLed->BlinkingLedState = RTW_LED_OFF;
++			if( pLed->bLedBlinkInProgress)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedBlinkInProgress = _FALSE;
++			}
++			if( pLed->bLedScanBlinkInProgress)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedScanBlinkInProgress = _FALSE;
++			}			
++			if( pLed->bLedWPSBlinkInProgress )
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedWPSBlinkInProgress = _FALSE;
++			}
++
++			_set_timer(&(pLed->BlinkTimer), 0);
++			break;
++			
++		default:
++			break;
++
++	}
++
++	RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState));
++}
++
++  //COREGA, added by chiyoko, 20090316
++ static void
++ SwLedControlMode3(
++	_adapter				*padapter,
++	LED_CTL_MODE		LedAction
++)
++{
++	struct led_priv	*ledpriv = &(padapter->ledpriv);
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	PLED_871x		pLed = &(ledpriv->SwLed0);
++	
++	switch(LedAction)
++	{		
++		case LED_CTL_SITE_SURVEY:
++			if(pmlmepriv->LinkDetectInfo.bBusyTraffic)
++				;		 
++			else if(pLed->bLedScanBlinkInProgress ==_FALSE)
++			{
++				if(IS_LED_WPS_BLINKING(pLed))
++					return;
++
++				if(pLed->bLedBlinkInProgress ==_TRUE)
++				{
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					pLed->bLedBlinkInProgress = _FALSE;
++				}
++				pLed->bLedScanBlinkInProgress = _TRUE;
++				pLed->CurrLedState = LED_SCAN_BLINK;
++				pLed->BlinkTimes = 24;
++				if( pLed->bLedOn )
++					pLed->BlinkingLedState = RTW_LED_OFF; 
++				else
++					pLed->BlinkingLedState = RTW_LED_ON;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
++			}
++			break;
++		
++		case LED_CTL_TX:
++		case LED_CTL_RX:
++	 		if((pLed->bLedBlinkInProgress ==_FALSE) && (check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE))
++	  		{
++	  		  	if(pLed->CurrLedState == LED_SCAN_BLINK || IS_LED_WPS_BLINKING(pLed))
++				{
++					return;
++				}
++
++				pLed->bLedBlinkInProgress = _TRUE;
++				pLed->CurrLedState = LED_TXRX_BLINK;
++				pLed->BlinkTimes = 2;
++				if( pLed->bLedOn )
++					pLed->BlinkingLedState = RTW_LED_OFF; 
++				else
++					pLed->BlinkingLedState = RTW_LED_ON;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA);
++			}
++			break;
++
++		case LED_CTL_LINK:
++			if(IS_LED_WPS_BLINKING(pLed))
++				return;
++			
++			pLed->CurrLedState = RTW_LED_ON;
++			pLed->BlinkingLedState = RTW_LED_ON;
++			if( pLed->bLedBlinkInProgress)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedBlinkInProgress = _FALSE;
++			}
++			if( pLed->bLedScanBlinkInProgress)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedScanBlinkInProgress = _FALSE;
++			}			
++
++			_set_timer(&(pLed->BlinkTimer), 0);
++			break;			
++
++		case LED_CTL_START_WPS: //wait until xinpin finish
++		case LED_CTL_START_WPS_BOTTON:		
++			if(pLed->bLedWPSBlinkInProgress ==_FALSE)
++			{
++				if(pLed->bLedBlinkInProgress ==_TRUE)
++				{
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					pLed->bLedBlinkInProgress = _FALSE;
++				}
++				if(pLed->bLedScanBlinkInProgress ==_TRUE)
++				{
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					pLed->bLedScanBlinkInProgress = _FALSE;
++				}				
++				pLed->bLedWPSBlinkInProgress = _TRUE;
++				pLed->CurrLedState = LED_BLINK_WPS;
++				if( pLed->bLedOn )
++					pLed->BlinkingLedState = RTW_LED_OFF; 
++				else
++					pLed->BlinkingLedState = RTW_LED_ON;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
++			}			
++			break;
++			
++		case LED_CTL_STOP_WPS:			
++			if(pLed->bLedWPSBlinkInProgress)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedWPSBlinkInProgress = _FALSE;				
++			}						
++			else
++			{
++				pLed->bLedWPSBlinkInProgress = _TRUE;
++			}
++				
++			pLed->CurrLedState = LED_BLINK_WPS_STOP;
++			if(pLed->bLedOn)
++			{
++				pLed->BlinkingLedState = RTW_LED_OFF;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA);
++			}
++			else
++			{
++				pLed->BlinkingLedState = RTW_LED_ON;
++				_set_timer(&(pLed->BlinkTimer), 0);
++			}					
++
++			break;
++			
++		case LED_CTL_STOP_WPS_FAIL:			
++			if(pLed->bLedWPSBlinkInProgress)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedWPSBlinkInProgress = _FALSE;				
++			}			
++
++			pLed->CurrLedState = RTW_LED_OFF;
++			pLed->BlinkingLedState = RTW_LED_OFF;
++			_set_timer(&(pLed->BlinkTimer), 0);
++			break;				
++
++		case LED_CTL_START_TO_LINK: 
++		case LED_CTL_NO_LINK:
++			if(!IS_LED_BLINKING(pLed))
++			{
++				pLed->CurrLedState = RTW_LED_OFF;
++				pLed->BlinkingLedState = RTW_LED_OFF;
++				_set_timer(&(pLed->BlinkTimer), 0);
++			}
++			break;
++			
++		case LED_CTL_POWER_OFF:
++			pLed->CurrLedState = RTW_LED_OFF;
++			pLed->BlinkingLedState = RTW_LED_OFF;
++			if( pLed->bLedBlinkInProgress)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedBlinkInProgress = _FALSE;
++			}
++			if( pLed->bLedScanBlinkInProgress)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedScanBlinkInProgress = _FALSE;
++			}			
++			if( pLed->bLedWPSBlinkInProgress )
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedWPSBlinkInProgress = _FALSE;
++			}
++
++			_set_timer(&(pLed->BlinkTimer), 0);
++			break;
++			
++		default:
++			break;
++
++	}
++
++	RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("CurrLedState %d\n", pLed->CurrLedState));
++}
++
++
++ //Edimax-Belkin, added by chiyoko, 20090413
++static void
++SwLedControlMode4(
++	_adapter				*padapter,
++	LED_CTL_MODE		LedAction
++)
++{
++	struct led_priv	*ledpriv = &(padapter->ledpriv);
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	PLED_871x		pLed = &(ledpriv->SwLed0);
++	PLED_871x		pLed1 = &(ledpriv->SwLed1);
++	
++	switch(LedAction)
++	{		
++		case LED_CTL_START_TO_LINK:	
++			if(pLed1->bLedWPSBlinkInProgress)
++			{
++				pLed1->bLedWPSBlinkInProgress = _FALSE;
++				_cancel_timer_ex(&(pLed1->BlinkTimer));
++		
++				pLed1->BlinkingLedState = RTW_LED_OFF;
++				pLed1->CurrLedState = RTW_LED_OFF;
++
++				if(pLed1->bLedOn)
++					_set_timer(&(pLed->BlinkTimer), 0);
++			}
++				
++			if( pLed->bLedStartToLinkBlinkInProgress == _FALSE )
++			{
++				if(pLed->CurrLedState == LED_SCAN_BLINK || IS_LED_WPS_BLINKING(pLed))
++				{
++					return;
++				}
++	 			if(pLed->bLedBlinkInProgress ==_TRUE)
++				{
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					pLed->bLedBlinkInProgress = _FALSE;
++	 			}
++	 			if(pLed->bLedNoLinkBlinkInProgress ==_TRUE)
++				{	
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					pLed->bLedNoLinkBlinkInProgress = _FALSE;
++	 			}				
++				
++				pLed->bLedStartToLinkBlinkInProgress = _TRUE;
++				pLed->CurrLedState = LED_BLINK_StartToBlink;
++				if( pLed->bLedOn )
++				{
++					pLed->BlinkingLedState = RTW_LED_OFF;
++					_set_timer(&(pLed->BlinkTimer), LED_BLINK_SLOWLY_INTERVAL);
++				}
++				else
++				{
++					pLed->BlinkingLedState = RTW_LED_ON;
++					_set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL);
++				}
++			}
++			break;		
++
++		case LED_CTL_LINK:			
++		case LED_CTL_NO_LINK:
++			//LED1 settings
++			if(LedAction == LED_CTL_LINK)
++			{
++				if(pLed1->bLedWPSBlinkInProgress)
++				{
++					pLed1->bLedWPSBlinkInProgress = _FALSE;
++					_cancel_timer_ex(&(pLed1->BlinkTimer));
++			
++					pLed1->BlinkingLedState = RTW_LED_OFF;
++					pLed1->CurrLedState = RTW_LED_OFF;
++
++					if(pLed1->bLedOn)
++						_set_timer(&(pLed->BlinkTimer), 0);
++				}				
++			}
++			
++			if( pLed->bLedNoLinkBlinkInProgress == _FALSE )
++			{
++				if(pLed->CurrLedState == LED_SCAN_BLINK || IS_LED_WPS_BLINKING(pLed))
++				{
++					return;
++				}
++	 			if(pLed->bLedBlinkInProgress ==_TRUE)
++				{
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					pLed->bLedBlinkInProgress = _FALSE;
++	 			}
++				
++				pLed->bLedNoLinkBlinkInProgress = _TRUE;
++				pLed->CurrLedState = LED_BLINK_SLOWLY;
++				if( pLed->bLedOn )
++					pLed->BlinkingLedState = RTW_LED_OFF; 
++				else
++					pLed->BlinkingLedState = RTW_LED_ON;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA);
++			}
++			break;		
++
++		case LED_CTL_SITE_SURVEY:
++			if((pmlmepriv->LinkDetectInfo.bBusyTraffic) && (check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE))
++				;		 
++			else if(pLed->bLedScanBlinkInProgress ==_FALSE)
++			{
++				if(IS_LED_WPS_BLINKING(pLed))
++					return;
++
++				if(pLed->bLedNoLinkBlinkInProgress == _TRUE)
++				{
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					pLed->bLedNoLinkBlinkInProgress = _FALSE;
++				}
++				if(pLed->bLedBlinkInProgress ==_TRUE)
++				{
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					pLed->bLedBlinkInProgress = _FALSE;
++				}
++				pLed->bLedScanBlinkInProgress = _TRUE;
++				pLed->CurrLedState = LED_SCAN_BLINK;
++				pLed->BlinkTimes = 24;
++				if( pLed->bLedOn )
++					pLed->BlinkingLedState = RTW_LED_OFF; 
++				else
++					pLed->BlinkingLedState = RTW_LED_ON;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
++			}
++			break;
++		
++		case LED_CTL_TX:
++		case LED_CTL_RX:
++	 		if(pLed->bLedBlinkInProgress ==_FALSE)
++	  		{
++	  		  	if(pLed->CurrLedState == LED_SCAN_BLINK || IS_LED_WPS_BLINKING(pLed))
++				{
++					return;
++				}
++	  		  	if(pLed->bLedNoLinkBlinkInProgress == _TRUE)
++				{
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					pLed->bLedNoLinkBlinkInProgress = _FALSE;
++				}
++				pLed->bLedBlinkInProgress = _TRUE;
++				pLed->CurrLedState = LED_TXRX_BLINK;
++				pLed->BlinkTimes = 2;
++				if( pLed->bLedOn )
++					pLed->BlinkingLedState = RTW_LED_OFF; 
++				else
++					pLed->BlinkingLedState = RTW_LED_ON;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA);
++			}
++			break;
++
++		case LED_CTL_START_WPS: //wait until xinpin finish
++		case LED_CTL_START_WPS_BOTTON:
++			if(pLed1->bLedWPSBlinkInProgress)
++			{
++				pLed1->bLedWPSBlinkInProgress = _FALSE;
++				_cancel_timer_ex(&(pLed1->BlinkTimer));
++			
++				pLed1->BlinkingLedState = RTW_LED_OFF;
++				pLed1->CurrLedState = RTW_LED_OFF;
++
++				if(pLed1->bLedOn)
++					_set_timer(&(pLed->BlinkTimer), 0);
++			}
++				
++			if(pLed->bLedWPSBlinkInProgress ==_FALSE)
++			{
++				if(pLed->bLedNoLinkBlinkInProgress == _TRUE)
++				{
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					pLed->bLedNoLinkBlinkInProgress = _FALSE;
++				}
++				if(pLed->bLedBlinkInProgress ==_TRUE)
++				{
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					pLed->bLedBlinkInProgress = _FALSE;
++				}
++				if(pLed->bLedScanBlinkInProgress ==_TRUE)
++				{
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					pLed->bLedScanBlinkInProgress = _FALSE;
++				}				
++				pLed->bLedWPSBlinkInProgress = _TRUE;
++				pLed->CurrLedState = LED_BLINK_WPS;
++				if( pLed->bLedOn )
++				{
++					pLed->BlinkingLedState = RTW_LED_OFF;
++					_set_timer(&(pLed->BlinkTimer), LED_BLINK_SLOWLY_INTERVAL);
++				}
++				else
++				{
++					pLed->BlinkingLedState = RTW_LED_ON;
++					_set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL);
++				}
++			}
++			break;
++		
++		case LED_CTL_STOP_WPS:	//WPS connect success		
++			if(pLed->bLedWPSBlinkInProgress)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedWPSBlinkInProgress = _FALSE;								
++			}
++
++			pLed->bLedNoLinkBlinkInProgress = _TRUE;
++			pLed->CurrLedState = LED_BLINK_SLOWLY;
++			if( pLed->bLedOn )
++				pLed->BlinkingLedState = RTW_LED_OFF; 
++			else
++				pLed->BlinkingLedState = RTW_LED_ON;
++			_set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA);
++
++			break;		
++
++		case LED_CTL_STOP_WPS_FAIL:		//WPS authentication fail			
++			if(pLed->bLedWPSBlinkInProgress)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedWPSBlinkInProgress = _FALSE;				
++			}			
++
++			pLed->bLedNoLinkBlinkInProgress = _TRUE;
++			pLed->CurrLedState = LED_BLINK_SLOWLY;
++			if( pLed->bLedOn )
++				pLed->BlinkingLedState = RTW_LED_OFF; 
++			else
++				pLed->BlinkingLedState = RTW_LED_ON;
++			_set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA);
++
++			//LED1 settings
++			if(pLed1->bLedWPSBlinkInProgress)
++				_cancel_timer_ex(&(pLed1->BlinkTimer));
++			else	
++				pLed1->bLedWPSBlinkInProgress = _TRUE;				
++
++			pLed1->CurrLedState = LED_BLINK_WPS_STOP;
++			if( pLed1->bLedOn )
++				pLed1->BlinkingLedState = RTW_LED_OFF; 
++			else
++				pLed1->BlinkingLedState = RTW_LED_ON;
++			_set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL);
++
++			break;				
++
++		case LED_CTL_STOP_WPS_FAIL_OVERLAP:	//WPS session overlap		
++			if(pLed->bLedWPSBlinkInProgress)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedWPSBlinkInProgress = _FALSE;								
++			}
++			
++			pLed->bLedNoLinkBlinkInProgress = _TRUE;
++			pLed->CurrLedState = LED_BLINK_SLOWLY;
++			if( pLed->bLedOn )
++				pLed->BlinkingLedState = RTW_LED_OFF; 
++			else
++				pLed->BlinkingLedState = RTW_LED_ON;
++			_set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA);
++
++			//LED1 settings
++			if(pLed1->bLedWPSBlinkInProgress)
++				_cancel_timer_ex(&(pLed1->BlinkTimer));
++			else	
++				pLed1->bLedWPSBlinkInProgress = _TRUE;				
++
++			pLed1->CurrLedState = LED_BLINK_WPS_STOP_OVERLAP;
++			pLed1->BlinkTimes = 10;
++			if( pLed1->bLedOn )
++				pLed1->BlinkingLedState = RTW_LED_OFF; 
++			else
++				pLed1->BlinkingLedState = RTW_LED_ON;
++			_set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL);
++			
++			break;
++
++		case LED_CTL_POWER_OFF:
++			pLed->CurrLedState = RTW_LED_OFF;
++			pLed->BlinkingLedState = RTW_LED_OFF; 
++			
++			if( pLed->bLedNoLinkBlinkInProgress)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedNoLinkBlinkInProgress = _FALSE;
++			}
++			if( pLed->bLedLinkBlinkInProgress)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedLinkBlinkInProgress = _FALSE;
++			}
++			if( pLed->bLedBlinkInProgress)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedBlinkInProgress = _FALSE;
++			}
++			if( pLed->bLedWPSBlinkInProgress )
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedWPSBlinkInProgress = _FALSE;
++			}
++			if( pLed->bLedScanBlinkInProgress)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedScanBlinkInProgress = _FALSE;
++			}	
++			if( pLed->bLedStartToLinkBlinkInProgress)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedStartToLinkBlinkInProgress = _FALSE;
++			}			
++
++			if( pLed1->bLedWPSBlinkInProgress )
++			{
++				_cancel_timer_ex(&(pLed1->BlinkTimer));
++				pLed1->bLedWPSBlinkInProgress = _FALSE;
++			}
++
++			pLed1->BlinkingLedState = LED_UNKNOWN;				
++			SwLedOff(padapter, pLed);
++			SwLedOff(padapter, pLed1);			
++			break;
++			
++		default:
++			break;
++
++	}
++
++	RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Led %d\n", pLed->CurrLedState));
++}
++
++
++
++ //Sercomm-Belkin, added by chiyoko, 20090415
++static void
++SwLedControlMode5(
++	_adapter				*padapter,
++	LED_CTL_MODE		LedAction
++)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++	struct led_priv	*ledpriv = &(padapter->ledpriv);
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	PLED_871x		pLed = &(ledpriv->SwLed0);
++
++	if(pHalData->EEPROMCustomerID == RT_CID_819x_CAMEO)
++		pLed = &(ledpriv->SwLed1);
++	
++	switch(LedAction)
++	{		
++		case LED_CTL_POWER_ON:
++		case LED_CTL_NO_LINK:
++		case LED_CTL_LINK: 	//solid blue
++			pLed->CurrLedState = RTW_LED_ON;
++			pLed->BlinkingLedState = RTW_LED_ON; 
++
++			_set_timer(&(pLed->BlinkTimer), 0);
++			break;
++
++		case LED_CTL_SITE_SURVEY:
++			if((pmlmepriv->LinkDetectInfo.bBusyTraffic) && (check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE))
++				;		 
++			else if(pLed->bLedScanBlinkInProgress ==_FALSE)
++			{				
++				if(pLed->bLedBlinkInProgress ==_TRUE)
++				{
++					_cancel_timer_ex(&(pLed->BlinkTimer));
++					pLed->bLedBlinkInProgress = _FALSE;
++				}
++				pLed->bLedScanBlinkInProgress = _TRUE;
++				pLed->CurrLedState = LED_SCAN_BLINK;
++				pLed->BlinkTimes = 24;
++				if( pLed->bLedOn )
++					pLed->BlinkingLedState = RTW_LED_OFF; 
++				else
++					pLed->BlinkingLedState = RTW_LED_ON;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
++			}
++			break;
++		
++		case LED_CTL_TX:
++		case LED_CTL_RX:
++	 		if(pLed->bLedBlinkInProgress ==_FALSE)
++	  		{
++	  		  	if(pLed->CurrLedState == LED_SCAN_BLINK)
++				{
++					return;
++				}			
++				pLed->bLedBlinkInProgress = _TRUE;
++				pLed->CurrLedState = LED_TXRX_BLINK;
++				pLed->BlinkTimes = 2;
++				if( pLed->bLedOn )
++					pLed->BlinkingLedState = RTW_LED_OFF; 
++				else
++					pLed->BlinkingLedState = RTW_LED_ON;
++				_set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA);
++			}
++			break;				
++
++		case LED_CTL_POWER_OFF:
++			pLed->CurrLedState = RTW_LED_OFF;
++			pLed->BlinkingLedState = RTW_LED_OFF; 
++
++			if( pLed->bLedBlinkInProgress)
++			{
++				_cancel_timer_ex(&(pLed->BlinkTimer));
++				pLed->bLedBlinkInProgress = _FALSE;
++			}			
++				
++			SwLedOff(padapter, pLed);
++			break;
++			
++		default:
++			break;
++
++	}
++
++	RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("Led %d\n", pLed->CurrLedState));
++}
++
++ //WNC-Corega, added by chiyoko, 20090902
++static void
++SwLedControlMode6(
++	_adapter				*padapter,
++	LED_CTL_MODE		LedAction
++)
++{
++	struct led_priv	*ledpriv = &(padapter->ledpriv);
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	PLED_871x pLed0 = &(ledpriv->SwLed0);
++	
++	switch(LedAction)
++	{
++		case LED_CTL_POWER_ON:
++		case LED_CTL_LINK:
++		case LED_CTL_NO_LINK:
++			_cancel_timer_ex(&(pLed0->BlinkTimer));
++			pLed0->CurrLedState = RTW_LED_ON;
++			pLed0->BlinkingLedState = RTW_LED_ON;
++			_set_timer(&(pLed0->BlinkTimer), 0);
++			break;
++
++		case LED_CTL_POWER_OFF:
++			SwLedOff(padapter, pLed0);
++			break;
++
++		default:
++			break;
++	}
++
++	RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("ledcontrol 6 Led %d\n", pLed0->CurrLedState));
++}
++
++
++//
++//	Description:	
++//		Dispatch LED action according to pHalData->LedStrategy. 
++//
++static void
++LedControl871x(
++	_adapter				*padapter,
++	LED_CTL_MODE		LedAction
++	)
++{
++	struct led_priv	*ledpriv = &(padapter->ledpriv);
++
++       if( (padapter->bSurpriseRemoved == _TRUE) || ( padapter->bDriverStopped == _TRUE) 
++	   	||(padapter->hw_init_completed == _FALSE) )	
++       {
++             return;
++       }
++
++
++	if( ledpriv->bRegUseLed == _FALSE)
++		return;
++
++	//if (!priv->up)
++	//	return;
++
++	//if(priv->bInHctTest)
++	//	return;
++
++	if( (padapter->pwrctrlpriv.rf_pwrstate != rf_on &&
++		padapter->pwrctrlpriv.rfoff_reason > RF_CHANGE_BY_PS) &&
++		(LedAction == LED_CTL_TX || LedAction == LED_CTL_RX || 
++		 LedAction == LED_CTL_SITE_SURVEY || 
++		 LedAction == LED_CTL_LINK || 
++		 LedAction == LED_CTL_NO_LINK ||
++		 LedAction == LED_CTL_POWER_ON) )
++	{
++		return;
++	}
++	
++	switch(ledpriv->LedStrategy)
++	{
++		case SW_LED_MODE0:
++			//SwLedControlMode0(padapter, LedAction);
++			break;
++
++		case SW_LED_MODE1:
++			SwLedControlMode1(padapter, LedAction);
++			break;
++		case SW_LED_MODE2:
++			SwLedControlMode2(padapter, LedAction);
++                	break;
++
++		case SW_LED_MODE3:
++			SwLedControlMode3(padapter, LedAction);
++			break;	
++
++		case SW_LED_MODE4:
++			SwLedControlMode4(padapter, LedAction);
++			break;			
++
++		case SW_LED_MODE5:
++			SwLedControlMode5(padapter, LedAction);
++			break;
++
++		case SW_LED_MODE6:
++			SwLedControlMode6(padapter, LedAction);
++			break;
++
++		default:
++			break;
++	}
++	
++	RT_TRACE(_module_rtl8712_led_c_,_drv_info_,("LedStrategy:%d, LedAction %d\n", ledpriv->LedStrategy,LedAction));
++}
++
++//
++//	Description:
++//		Initialize all LED_871x objects.
++//
++void
++rtl8192cu_InitSwLeds(
++	_adapter	*padapter
++	)
++{
++	struct led_priv *pledpriv = &(padapter->ledpriv);
++
++	pledpriv->LedControlHandler = LedControl871x;
++
++	InitLed871x(padapter, &(pledpriv->SwLed0), LED_PIN_LED0);
++
++	InitLed871x(padapter,&(pledpriv->SwLed1), LED_PIN_LED1);
++}
++
++
++//
++//	Description:
++//		DeInitialize all LED_819xUsb objects.
++//
++void
++rtl8192cu_DeInitSwLeds(
++	_adapter	*padapter
++	)
++{
++	struct led_priv	*ledpriv = &(padapter->ledpriv);
++
++	DeInitLed871x( &(ledpriv->SwLed0) );
++	DeInitLed871x( &(ledpriv->SwLed1) );
++}
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/rtl8192cu_recv.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/rtl8192cu_recv.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/rtl8192cu_recv.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/rtl8192cu_recv.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,229 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _RTL8192CU_RECV_C_
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <recv_osdep.h>
++#include <mlme_osdep.h>
++#include <ip.h>
++#include <if_ether.h>
++#include <ethernet.h>
++
++#include <usb_ops.h>
++
++#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS)
++
++#error "Shall be Linux or Windows, but not both!\n"
++
++#endif
++
++#include <wifi.h>
++#include <circ_buf.h>
++
++#include <rtl8192c_hal.h>
++
++
++void rtl8192cu_init_recvbuf(_adapter *padapter, struct recv_buf *precvbuf)
++{
++
++	precvbuf->transfer_len = 0;
++
++	precvbuf->len = 0;
++
++	precvbuf->ref_cnt = 0;
++
++	if(precvbuf->pbuf)
++	{
++		precvbuf->pdata = precvbuf->phead = precvbuf->ptail = precvbuf->pbuf;
++		precvbuf->pend = precvbuf->pdata + MAX_RECVBUF_SZ;
++	}
++
++}
++
++int	rtl8192cu_init_recv_priv(_adapter *padapter)
++{
++	struct recv_priv	*precvpriv = &padapter->recvpriv;
++	int	i, res = _SUCCESS;
++	struct recv_buf *precvbuf;
++
++#ifdef CONFIG_RECV_THREAD_MODE	
++	_rtw_init_sema(&precvpriv->recv_sema, 0);//will be removed
++	_rtw_init_sema(&precvpriv->terminate_recvthread_sema, 0);//will be removed
++#endif
++
++#ifdef PLATFORM_LINUX
++	tasklet_init(&precvpriv->recv_tasklet,
++	     (void(*)(unsigned long))rtl8192cu_recv_tasklet,
++	     (unsigned long)padapter);
++#endif
++
++#ifdef CONFIG_USB_INTERRUPT_IN_PIPE
++#ifdef PLATFORM_LINUX
++	precvpriv->int_in_urb = usb_alloc_urb(0, GFP_KERNEL);
++	if(precvpriv->int_in_urb == NULL){
++		DBG_8192C("alloc_urb for interrupt in endpoint fail !!!!\n");
++	}
++#endif
++	precvpriv->int_in_buf = rtw_zmalloc(sizeof(INTERRUPT_MSG_FORMAT_EX));
++	if(precvpriv->int_in_buf == NULL){
++		DBG_8192C("alloc_mem for interrupt in endpoint fail !!!!\n");
++	}
++#endif
++
++	//init recv_buf
++	_rtw_init_queue(&precvpriv->free_recv_buf_queue);
++
++#ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX
++	_rtw_init_queue(&precvpriv->recv_buf_pending_queue);
++#endif	// CONFIG_USE_USB_BUFFER_ALLOC_RX
++
++	precvpriv->pallocated_recv_buf = rtw_zmalloc(NR_RECVBUFF *sizeof(struct recv_buf) + 4);
++	if(precvpriv->pallocated_recv_buf==NULL){
++		res= _FAIL;
++		RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("alloc recv_buf fail!\n"));
++		goto exit;
++	}
++	_rtw_memset(precvpriv->pallocated_recv_buf, 0, NR_RECVBUFF *sizeof(struct recv_buf) + 4);
++
++	precvpriv->precv_buf = (u8 *)N_BYTE_ALIGMENT((SIZE_PTR)(precvpriv->pallocated_recv_buf), 4);
++	//precvpriv->precv_buf = precvpriv->pallocated_recv_buf + 4 -
++	//						((uint) (precvpriv->pallocated_recv_buf) &(4-1));
++
++
++	precvbuf = (struct recv_buf*)precvpriv->precv_buf;
++
++	for(i=0; i < NR_RECVBUFF ; i++)
++	{
++		_rtw_init_listhead(&precvbuf->list);
++
++		_rtw_spinlock_init(&precvbuf->recvbuf_lock);
++
++		precvbuf->alloc_sz = MAX_RECVBUF_SZ;
++
++		res = rtw_os_recvbuf_resource_alloc(padapter, precvbuf);
++		if(res==_FAIL)
++			break;
++
++		precvbuf->ref_cnt = 0;
++		precvbuf->adapter =padapter;
++
++
++		//rtw_list_insert_tail(&precvbuf->list, &(precvpriv->free_recv_buf_queue.queue));
++
++		precvbuf++;
++
++	}
++
++	precvpriv->free_recv_buf_queue_cnt = NR_RECVBUFF;
++
++#ifdef PLATFORM_LINUX
++
++	skb_queue_head_init(&precvpriv->rx_skb_queue);
++
++#ifdef CONFIG_PREALLOC_RECV_SKB
++	{
++		int i;
++		SIZE_PTR tmpaddr=0;
++		SIZE_PTR alignment=0;
++		struct sk_buff *pskb=NULL;
++
++		skb_queue_head_init(&precvpriv->free_recv_skb_queue);
++
++		for(i=0; i<NR_PREALLOC_RECV_SKB; i++)
++		{
++			pskb = rtw_skb_alloc(MAX_RECVBUF_SZ + RECVBUFF_ALIGN_SZ);
++
++			if(pskb)
++			{
++				pskb->dev = padapter->pnetdev;
++
++				tmpaddr = (SIZE_PTR)pskb->data;
++				alignment = tmpaddr & (RECVBUFF_ALIGN_SZ-1);
++				skb_reserve(pskb, (RECVBUFF_ALIGN_SZ - alignment));
++
++				skb_queue_tail(&precvpriv->free_recv_skb_queue, pskb);
++			}
++
++			pskb=NULL;
++
++		}
++	}
++#endif
++
++#endif
++
++exit:
++
++	return res;
++
++}
++
++void rtl8192cu_free_recv_priv (_adapter *padapter)
++{
++	int	i;
++	struct recv_buf	*precvbuf;
++	struct recv_priv	*precvpriv = &padapter->recvpriv;
++
++	precvbuf = (struct recv_buf *)precvpriv->precv_buf;
++
++	for(i=0; i < NR_RECVBUFF ; i++)
++	{
++		rtw_os_recvbuf_resource_free(padapter, precvbuf);
++		precvbuf++;
++	}
++
++	if(precvpriv->pallocated_recv_buf)
++		rtw_mfree(precvpriv->pallocated_recv_buf, NR_RECVBUFF *sizeof(struct recv_buf) + 4);
++
++#ifdef CONFIG_USB_INTERRUPT_IN_PIPE
++#ifdef PLATFORM_LINUX
++	if(precvpriv->int_in_urb)
++	{
++		usb_free_urb(precvpriv->int_in_urb);
++	}
++#endif
++	if(precvpriv->int_in_buf)
++		rtw_mfree(precvpriv->int_in_buf, sizeof(INTERRUPT_MSG_FORMAT_EX));
++#endif
++
++#ifdef PLATFORM_LINUX
++
++	if (skb_queue_len(&precvpriv->rx_skb_queue)) {
++		DBG_8192C(KERN_WARNING "rx_skb_queue not empty\n");
++	}
++
++	rtw_skb_queue_purge(&precvpriv->rx_skb_queue);
++
++#ifdef CONFIG_PREALLOC_RECV_SKB
++
++	if (skb_queue_len(&precvpriv->free_recv_skb_queue)) {
++		DBG_8192C(KERN_WARNING "free_recv_skb_queue not empty, %d\n", skb_queue_len(&precvpriv->free_recv_skb_queue));
++	}
++
++	rtw_skb_queue_purge(&precvpriv->free_recv_skb_queue);
++
++#endif
++
++#endif
++
++}
++
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/rtl8192cu_xmit.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/rtl8192cu_xmit.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/rtl8192cu_xmit.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/rtl8192cu_xmit.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,1150 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _RTL8192C_XMIT_C_
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <rtw_byteorder.h>
++#include <wifi.h>
++#include <osdep_intf.h>
++#include <circ_buf.h>
++#include <usb_ops.h>
++#include <rtl8192c_hal.h>
++
++#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS)
++#error "Shall be Linux or Windows, but not both!\n"
++#endif
++
++
++s32	rtl8192cu_init_xmit_priv(_adapter *padapter)
++{
++	struct xmit_priv	*pxmitpriv = &padapter->xmitpriv;
++
++#ifdef PLATFORM_LINUX
++	tasklet_init(&pxmitpriv->xmit_tasklet,
++	     (void(*)(unsigned long))rtl8192cu_xmit_tasklet,
++	     (unsigned long)padapter);
++#endif
++	return _SUCCESS;
++}
++
++void	rtl8192cu_free_xmit_priv(_adapter *padapter)
++{
++}
++
++u32 rtw_get_ff_hwaddr(struct xmit_frame	*pxmitframe)
++{
++	u32 addr;
++	struct pkt_attrib *pattrib = &pxmitframe->attrib;	
++	
++	switch(pattrib->qsel)
++	{
++		case 0:
++		case 3:
++			addr = BE_QUEUE_INX;
++		 	break;
++		case 1:
++		case 2:
++			addr = BK_QUEUE_INX;
++			break;				
++		case 4:
++		case 5:
++			addr = VI_QUEUE_INX;
++			break;		
++		case 6:
++		case 7:
++			addr = VO_QUEUE_INX;
++			break;
++		case 0x10:
++			addr = BCN_QUEUE_INX;
++			break;
++		case 0x11://BC/MC in PS (HIQ)
++			addr = HIGH_QUEUE_INX;
++			break;
++		case 0x12:
++			addr = MGT_QUEUE_INX;
++			break;
++		default:
++			addr = BE_QUEUE_INX;
++			break;		
++			
++	}
++
++	return addr;
++
++}
++
++int urb_zero_packet_chk(_adapter *padapter, int sz)
++{
++	int blnSetTxDescOffset;
++	struct dvobj_priv	*pdvobj = adapter_to_dvobj(padapter);	
++
++	if ( pdvobj->ishighspeed )
++	{
++		if ( ( (sz + TXDESC_SIZE) % 512 ) == 0 ) {
++			blnSetTxDescOffset = 1;
++		} else {
++			blnSetTxDescOffset = 0;
++		}
++	}
++	else
++	{
++		if ( ( (sz + TXDESC_SIZE) % 64 ) == 0 ) 	{
++			blnSetTxDescOffset = 1;
++		} else {
++			blnSetTxDescOffset = 0;
++		}
++	}
++	
++	return blnSetTxDescOffset;
++	
++}
++
++void rtl8192cu_cal_txdesc_chksum(struct tx_desc	*ptxdesc)
++{
++		u16	*usPtr = (u16*)ptxdesc;
++		u32 count = 16;		// (32 bytes / 2 bytes per XOR) => 16 times
++		u32 index;
++		u16 checksum = 0;
++
++		//Clear first
++		ptxdesc->txdw7 &= cpu_to_le32(0xffff0000);
++	
++		for(index = 0 ; index < count ; index++){
++			checksum = checksum ^ le16_to_cpu(*(usPtr + index));
++		}
++
++		ptxdesc->txdw7 |= cpu_to_le32(0x0000ffff&checksum);	
++
++}
++
++void fill_txdesc_sectype(struct pkt_attrib *pattrib, struct tx_desc *ptxdesc)
++{
++	if ((pattrib->encrypt > 0) && !pattrib->bswenc)
++	{
++		switch (pattrib->encrypt)
++		{	
++			//SEC_TYPE
++			case _WEP40_:
++			case _WEP104_:
++					ptxdesc->txdw1 |= cpu_to_le32((0x01<<22)&0x00c00000);
++					break;				
++			case _TKIP_:
++			case _TKIP_WTMIC_:	
++					//ptxdesc->txdw1 |= cpu_to_le32((0x02<<22)&0x00c00000);
++					ptxdesc->txdw1 |= cpu_to_le32((0x01<<22)&0x00c00000);
++					break;
++			case _AES_:
++					ptxdesc->txdw1 |= cpu_to_le32((0x03<<22)&0x00c00000);
++					break;
++			case _NO_PRIVACY_:
++			default:
++					break;
++		
++		}
++		
++	}
++
++}
++
++static void fill_txdesc_vcs(struct pkt_attrib *pattrib, u32 *pdw)
++{
++	//DBG_8192C("cvs_mode=%d\n", pattrib->vcs_mode);	
++
++	switch(pattrib->vcs_mode)
++	{
++		case RTS_CTS:
++			*pdw |= cpu_to_le32(BIT(12));
++			break;
++		case CTS_TO_SELF:
++			*pdw |= cpu_to_le32(BIT(11));
++			break;
++		case NONE_VCS:
++		default:
++			break;		
++	}
++
++	if(pattrib->vcs_mode) {
++		*pdw |= cpu_to_le32(BIT(13));
++
++		// Set RTS BW
++		if(pattrib->ht_en)
++		{
++			*pdw |= (pattrib->bwmode&HT_CHANNEL_WIDTH_40)?	cpu_to_le32(BIT(27)):0;
++
++			if(pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_LOWER)
++				*pdw |= cpu_to_le32((0x01<<28)&0x30000000);
++			else if(pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_UPPER)
++				*pdw |= cpu_to_le32((0x02<<28)&0x30000000);
++			else if(pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_DONT_CARE)
++				*pdw |= 0;
++			else
++				*pdw |= cpu_to_le32((0x03<<28)&0x30000000);
++		}
++	}
++}
++
++static void fill_txdesc_phy(struct pkt_attrib *pattrib, u32 *pdw)
++{
++	//DBG_8192C("bwmode=%d, ch_off=%d\n", pattrib->bwmode, pattrib->ch_offset);
++
++	if(pattrib->ht_en)
++	{
++		*pdw |= (pattrib->bwmode&HT_CHANNEL_WIDTH_40)?	cpu_to_le32(BIT(25)):0;
++
++		if(pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_LOWER)
++			*pdw |= cpu_to_le32((0x01<<20)&0x00300000);
++		else if(pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_UPPER)
++			*pdw |= cpu_to_le32((0x02<<20)&0x00300000);
++		else if(pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_DONT_CARE)
++			*pdw |= 0;
++		else
++			*pdw |= cpu_to_le32((0x03<<20)&0x00300000);
++	}
++}
++
++static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz, u8 bagg_pkt)
++{
++	int	pull=0;
++	uint	qsel;
++	_adapter			*padapter = pxmitframe->padapter;
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;		
++	struct pkt_attrib	*pattrib = &pxmitframe->attrib;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	struct tx_desc	*ptxdesc = (struct tx_desc *)pmem;
++	struct ht_priv		*phtpriv = &pmlmepriv->htpriv;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	sint	bmcst = IS_MCAST(pattrib->ra);
++#ifdef CONFIG_P2P
++	struct wifidirect_info*	pwdinfo = &padapter->wdinfo;
++#endif //CONFIG_P2P
++
++#ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX
++	if((_FALSE == bagg_pkt) && (urb_zero_packet_chk(padapter, sz)==0))
++	{
++		ptxdesc = (struct tx_desc *)(pmem+PACKET_OFFSET_SZ);
++		pull = 1;
++		pxmitframe->pkt_offset --;
++	}
++#endif	// CONFIG_USE_USB_BUFFER_ALLOC_TX
++
++	_rtw_memset(ptxdesc, 0, sizeof(struct tx_desc));
++
++	if((pxmitframe->frame_tag&0x0f) == DATA_FRAMETAG)
++	{
++		//DBG_8192C("pxmitframe->frame_tag == DATA_FRAMETAG\n");			
++
++		//offset 4
++		ptxdesc->txdw1 |= cpu_to_le32(pattrib->mac_id&0x1f);
++
++		qsel = (uint)(pattrib->qsel & 0x0000001f);
++		ptxdesc->txdw1 |= cpu_to_le32((qsel << QSEL_SHT) & 0x00001f00);
++
++		ptxdesc->txdw1 |= cpu_to_le32((pattrib->raid<< 16) & 0x000f0000);
++
++		fill_txdesc_sectype(pattrib, ptxdesc);
++
++		if(pattrib->ampdu_en==_TRUE)
++			ptxdesc->txdw1 |= cpu_to_le32(BIT(5));//AGG EN
++		else
++			ptxdesc->txdw1 |= cpu_to_le32(BIT(6));//AGG BK
++		
++		//offset 8
++
++
++		//offset 12
++		ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum<<16)&0xffff0000);
++
++
++		//offset 16 , offset 20
++		if (pattrib->qos_en)
++			ptxdesc->txdw4 |= cpu_to_le32(BIT(6));//QoS
++
++		if ((pattrib->ether_type != 0x888e) && (pattrib->ether_type != 0x0806) && (pattrib->dhcp_pkt != 1))
++		{
++              	//Non EAP & ARP & DHCP type data packet
++              	
++			fill_txdesc_vcs(pattrib, &ptxdesc->txdw4);
++			fill_txdesc_phy(pattrib, &ptxdesc->txdw4);
++
++			ptxdesc->txdw4 |= cpu_to_le32(0x00000008);//RTS Rate=24M
++			ptxdesc->txdw5 |= cpu_to_le32(0x0001ff00);//
++			//ptxdesc->txdw5 |= cpu_to_le32(0x0000000b);//DataRate - 54M
++
++			//use REG_INIDATA_RATE_SEL value
++			ptxdesc->txdw5 |= cpu_to_le32(pdmpriv->INIDATA_RATE[pattrib->mac_id]);
++
++              	if(0)//for driver dbg
++			{
++				ptxdesc->txdw4 |= cpu_to_le32(BIT(8));//driver uses rate
++				
++				if(pattrib->ht_en)
++					ptxdesc->txdw5 |= cpu_to_le32(BIT(6));//SGI
++
++				ptxdesc->txdw5 |= cpu_to_le32(0x00000013);//init rate - mcs7
++			}
++
++		}
++		else
++		{
++			// EAP data packet and ARP packet.
++			// Use the 1M data rate to send the EAP/ARP packet.
++			// This will maybe make the handshake smooth.
++
++			ptxdesc->txdw1 |= cpu_to_le32(BIT(6));//AGG BK
++			
++		   	ptxdesc->txdw4 |= cpu_to_le32(BIT(8));//driver uses rate
++
++			if (pmlmeinfo->preamble_mode == PREAMBLE_SHORT)
++				ptxdesc->txdw4 |= cpu_to_le32(BIT(24));// DATA_SHORT
++
++			ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate));
++		}
++		
++		//offset 24
++#ifdef CONFIG_TCP_CSUM_OFFLOAD_TX
++		if ( pattrib->hw_tcp_csum == 1 ) {
++			// ptxdesc->txdw6 = 0; // clear TCP_CHECKSUM and IP_CHECKSUM. It's zero already!!
++			u8 ip_hdr_offset = 32 + pattrib->hdrlen + pattrib->iv_len + 8;
++			ptxdesc->txdw7 = (1 << 31) | (ip_hdr_offset << 16);
++			DBG_8192C("ptxdesc->txdw7 = %08x\n", ptxdesc->txdw7);
++		}
++#endif
++	}
++	else if((pxmitframe->frame_tag&0x0f)== MGNT_FRAMETAG)
++	{
++		//DBG_8192C("pxmitframe->frame_tag == MGNT_FRAMETAG\n");	
++		
++		//offset 4		
++		ptxdesc->txdw1 |= cpu_to_le32(pattrib->mac_id&0x1f);
++		
++		qsel = (uint)(pattrib->qsel&0x0000001f);
++		ptxdesc->txdw1 |= cpu_to_le32((qsel<<QSEL_SHT)&0x00001f00);
++
++		ptxdesc->txdw1 |= cpu_to_le32((pattrib->raid<< 16) & 0x000f0000);
++		
++		//fill_txdesc_sectype(pattrib, ptxdesc);
++		
++		//offset 8		
++#ifdef CONFIG_XMIT_ACK
++		//CCX-TXRPT ack for xmit mgmt frames.
++		if (pxmitframe->ack_report) {
++			ptxdesc->txdw2 |= cpu_to_le32(BIT(19));
++			#ifdef DBG_CCX
++			DBG_871X("%s set ccx\n", __func__);
++			#endif
++		}
++#endif //CONFIG_XMIT_ACK
++
++		//offset 12
++		ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum<<16)&0xffff0000);
++		
++		//offset 16
++		ptxdesc->txdw4 |= cpu_to_le32(BIT(8));//driver uses rate
++		
++		//offset 20
++		ptxdesc->txdw5 |= cpu_to_le32(BIT(17));//retry limit enable
++		if(pattrib->retry_ctrl == _TRUE)
++		{
++#ifdef CONFIG_P2P
++			if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++			{
++#ifdef CONFIG_INTEL_WIDI
++				if(padapter->mlmepriv.widi_enable == _TRUE)
++					ptxdesc->txdw5 |= cpu_to_le32(0x00180000);//retry limit = 6
++				else
++#endif //CONFIG_INTEL_WIDI
++					ptxdesc->txdw5 |= cpu_to_le32(0x00080000);//retry limit = 2
++			}
++			else
++#endif //CONFIG_P2P
++				ptxdesc->txdw5 |= cpu_to_le32(0x00180000);//retry limit = 6			
++		}
++		else
++			ptxdesc->txdw5 |= cpu_to_le32(0x00300000);//retry limit = 12
++
++#ifdef CONFIG_INTEL_PROXIM
++		if((padapter->proximity.proxim_on==_TRUE)&&(pattrib->intel_proxim==_TRUE)){
++			printk("\n %s pattrib->rate=%d\n",__FUNCTION__,pattrib->rate);
++			ptxdesc->txdw5 |= cpu_to_le32( pattrib->rate);
++		}
++		else
++#endif
++		{
++			ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate));
++		}
++	}
++	else if((pxmitframe->frame_tag&0x0f) == TXAGG_FRAMETAG)
++	{
++		DBG_8192C("pxmitframe->frame_tag == TXAGG_FRAMETAG\n");
++	}
++#ifdef CONFIG_MP_INCLUDED
++	else if((pxmitframe->frame_tag&0x0f) == MP_FRAMETAG)
++	{
++		fill_txdesc_for_mp(padapter, ptxdesc);
++	}
++#endif
++	else
++	{
++		DBG_8192C("pxmitframe->frame_tag = %d\n", pxmitframe->frame_tag);
++		
++		//offset 4	
++		ptxdesc->txdw1 |= cpu_to_le32((4)&0x1f);//CAM_ID(MAC_ID)
++		
++		ptxdesc->txdw1 |= cpu_to_le32((6<< 16) & 0x000f0000);//raid
++		
++		//offset 8		
++
++		//offset 12
++		ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum<<16)&0xffff0000);
++		
++		//offset 16
++		ptxdesc->txdw4 |= cpu_to_le32(BIT(8));//driver uses rate
++		
++		//offset 20
++		ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate));
++	}
++
++	// 2009.11.05. tynli_test. Suggested by SD4 Filen for FW LPS.
++	// (1) The sequence number of each non-Qos frame / broadcast / multicast /
++	// mgnt frame should be controled by Hw because Fw will also send null data
++	// which we cannot control when Fw LPS enable.
++	// --> default enable non-Qos data sequense number. 2010.06.23. by tynli.
++	// (2) Enable HW SEQ control for beacon packet, because we use Hw beacon.
++	// (3) Use HW Qos SEQ to control the seq num of Ext port non-Qos packets.
++	// 2010.06.23. Added by tynli.
++	if(!pattrib->qos_en)
++	{		
++		ptxdesc->txdw4 |= cpu_to_le32(BIT(7)); // Hw set sequence number
++		ptxdesc->txdw3 |= cpu_to_le32((8 <<28)); //set bit3 to 1. Suugested by TimChen. 2009.12.29.
++	}
++
++	//offset 0
++	ptxdesc->txdw0 |= cpu_to_le32(sz&0x0000ffff);
++	ptxdesc->txdw0 |= cpu_to_le32(OWN | FSG | LSG);
++	ptxdesc->txdw0 |= cpu_to_le32(((TXDESC_SIZE+OFFSET_SZ)<<OFFSET_SHT)&0x00ff0000);//32 bytes for TX Desc
++
++	if(bmcst)	
++	{
++		ptxdesc->txdw0 |= cpu_to_le32(BIT(24));
++	}	
++
++	RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("offset0-txdesc=0x%x\n", ptxdesc->txdw0));
++
++	//offset 4
++	// pkt_offset, unit:8 bytes padding
++	if (pxmitframe->pkt_offset > 0)
++		ptxdesc->txdw1 |= cpu_to_le32((pxmitframe->pkt_offset << 26) & 0x7c000000);
++
++#ifdef CONFIG_USB_TX_AGGREGATION
++	if (pxmitframe->agg_num > 1)
++		ptxdesc->txdw5 |= cpu_to_le32((pxmitframe->agg_num << 24) & 0xff000000);
++#endif
++
++	rtl8192cu_cal_txdesc_chksum(ptxdesc);
++		
++	return pull;
++		
++}
++
++static s32 rtw_dump_xframe(_adapter *padapter, struct xmit_frame *pxmitframe)
++{
++	s32 ret = _SUCCESS;
++	s32 inner_ret = _SUCCESS;
++	int t, sz, w_sz, pull=0;
++	u8 *mem_addr;
++	u32 ff_hwaddr;
++	struct xmit_buf *pxmitbuf = pxmitframe->pxmitbuf;
++	struct pkt_attrib *pattrib = &pxmitframe->attrib;
++	struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
++	struct security_priv *psecuritypriv = &padapter->securitypriv;
++
++	if ((pxmitframe->frame_tag == DATA_FRAMETAG) &&
++	    (pxmitframe->attrib.ether_type != 0x0806) &&
++	    (pxmitframe->attrib.ether_type != 0x888e) &&
++	    (pxmitframe->attrib.dhcp_pkt != 1))
++	{
++		rtw_issue_addbareq_cmd(padapter, pxmitframe);
++	}
++	
++	mem_addr = pxmitframe->buf_addr;
++
++       RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("rtw_dump_xframe()\n"));
++	
++	for (t = 0; t < pattrib->nr_frags; t++)
++	{
++		if (inner_ret != _SUCCESS && ret == _SUCCESS)
++			ret = _FAIL;
++
++		if (t != (pattrib->nr_frags - 1))
++		{
++			RT_TRACE(_module_rtl871x_xmit_c_,_drv_err_,("pattrib->nr_frags=%d\n", pattrib->nr_frags));
++
++			sz = pxmitpriv->frag_len;
++			sz = sz - 4 - (psecuritypriv->sw_encrypt ? 0 : pattrib->icv_len);					
++		}
++		else //no frag
++		{
++			sz = pattrib->last_txcmdsz;
++		}
++
++		pull = update_txdesc(pxmitframe, mem_addr, sz, _FALSE);
++		
++		if(pull)
++		{
++			mem_addr += PACKET_OFFSET_SZ; //pull txdesc head
++			
++			//pxmitbuf ->pbuf = mem_addr;			
++			pxmitframe->buf_addr = mem_addr;
++
++			w_sz = sz + TXDESC_SIZE;
++		}
++		else
++		{
++			w_sz = sz + TXDESC_SIZE + PACKET_OFFSET_SZ;
++		}	
++
++		ff_hwaddr = rtw_get_ff_hwaddr(pxmitframe);
++		
++		inner_ret = rtw_write_port(padapter, ff_hwaddr, w_sz, (unsigned char*)pxmitbuf);
++
++		rtw_count_tx_stats(padapter, pxmitframe, sz);
++
++
++		RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("rtw_write_port, w_sz=%d\n", w_sz));
++		//DBG_8192C("rtw_write_port, w_sz=%d, sz=%d, txdesc_sz=%d, tid=%d\n", w_sz, sz, w_sz-sz, pattrib->priority);      
++
++		mem_addr += w_sz;
++
++		mem_addr = (u8 *)RND4(((SIZE_PTR)(mem_addr)));
++
++	}
++	
++	rtw_free_xmitframe(pxmitpriv, pxmitframe);
++
++	if  (ret != _SUCCESS)
++		rtw_sctx_done_err(&pxmitbuf->sctx, RTW_SCTX_DONE_UNKNOWN);
++
++	return ret;
++}
++
++#ifdef CONFIG_USB_TX_AGGREGATION
++static u32 xmitframe_need_length(struct xmit_frame *pxmitframe)
++{
++	struct pkt_attrib *pattrib = &pxmitframe->attrib;
++
++	u32	len = 0;
++
++	// no consider fragement
++	len = pattrib->hdrlen + pattrib->iv_len +
++		SNAP_SIZE + sizeof(u16) +
++		pattrib->pktlen +
++		((pattrib->bswenc) ? pattrib->icv_len : 0);
++
++	if(pattrib->encrypt ==_TKIP_)
++		len += 8;
++
++	return len;
++}
++
++#define IDEA_CONDITION 1	// check all packets before enqueue
++s32 rtl8192cu_xmitframe_complete(_adapter *padapter, struct xmit_priv *pxmitpriv, struct xmit_buf *pxmitbuf)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++	struct xmit_frame *pxmitframe = NULL;
++	struct xmit_frame *pfirstframe = NULL;
++
++	// aggregate variable
++	struct hw_xmit *phwxmit;
++	struct sta_info *psta = NULL;
++	struct tx_servq *ptxservq = NULL;
++
++	_irqL irqL;
++	_list *xmitframe_plist = NULL, *xmitframe_phead = NULL;
++
++	u32	pbuf;	// next pkt address
++	u32	pbuf_tail;	// last pkt tail
++	u32	len;	// packet length, except TXDESC_SIZE and PKT_OFFSET
++
++	u32	bulkSize = pHalData->UsbBulkOutSize;
++	u8	descCount;
++	u32	bulkPtr;
++
++	// dump frame variable
++	u32 ff_hwaddr;
++
++#ifndef IDEA_CONDITION
++	int res = _SUCCESS;
++#endif
++
++	RT_TRACE(_module_rtl8192c_xmit_c_, _drv_info_, ("+xmitframe_complete\n"));
++
++
++	// check xmitbuffer is ok
++	if (pxmitbuf == NULL) {
++		pxmitbuf = rtw_alloc_xmitbuf(pxmitpriv);
++		if (pxmitbuf == NULL) return _FALSE;
++	}
++
++
++	//3 1. pick up first frame
++	do {
++		rtw_free_xmitframe(pxmitpriv, pxmitframe);
++			
++		pxmitframe = rtw_dequeue_xframe(pxmitpriv, pxmitpriv->hwxmits, pxmitpriv->hwxmit_entry);
++		if (pxmitframe == NULL) {
++			// no more xmit frame, release xmit buffer
++			rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
++			return _FALSE;
++		}
++
++
++#ifndef IDEA_CONDITION
++		if (pxmitframe->frame_tag != DATA_FRAMETAG) {
++			RT_TRACE(_module_rtl8192c_xmit_c_, _drv_err_,
++				 ("xmitframe_complete: frame tag(%d) is not DATA_FRAMETAG(%d)!\n",
++				  pxmitframe->frame_tag, DATA_FRAMETAG));
++//			rtw_free_xmitframe(pxmitpriv, pxmitframe);
++			continue;
++		}
++
++		// TID 0~15
++		if ((pxmitframe->attrib.priority < 0) ||
++		    (pxmitframe->attrib.priority > 15)) {
++			RT_TRACE(_module_rtl8192c_xmit_c_, _drv_err_,
++				 ("xmitframe_complete: TID(%d) should be 0~15!\n",
++				  pxmitframe->attrib.priority));
++//			rtw_free_xmitframe(pxmitpriv, pxmitframe);
++			continue;
++		}
++#endif
++
++		pxmitframe->pxmitbuf = pxmitbuf;
++		pxmitframe->buf_addr = pxmitbuf->pbuf;
++		pxmitbuf->priv_data = pxmitframe;
++
++		//pxmitframe->agg_num = 1; // alloc xmitframe should assign to 1.
++		pxmitframe->pkt_offset = 1; // first frame of aggregation, reserve offset
++
++
++		if (rtw_xmitframe_coalesce(padapter, pxmitframe->pkt, pxmitframe) == _FALSE) {
++			DBG_871X("%s coalesce 1st xmitframe failed \n",__FUNCTION__);
++			continue;
++		}
++
++
++		// always return ndis_packet after rtw_xmitframe_coalesce
++		rtw_os_xmit_complete(padapter, pxmitframe);
++
++		break;
++	} while (1);
++
++	//3 2. aggregate same priority and same DA(AP or STA) frames
++	pfirstframe = pxmitframe;
++	len = xmitframe_need_length(pfirstframe) + TXDESC_OFFSET;
++	pbuf_tail = len;
++	pbuf = _RND8(pbuf_tail);
++
++	// check pkt amount in one bluk
++	descCount = 0;
++	bulkPtr = bulkSize;
++	if (pbuf < bulkPtr)
++		descCount++;
++	else {
++		descCount = 0;
++		bulkPtr = ((pbuf / bulkSize) + 1) * bulkSize; // round to next bulkSize
++	}
++
++	// dequeue same priority packet from station tx queue
++	psta = pfirstframe->attrib.psta;
++	switch (pfirstframe->attrib.priority) {
++		case 1:
++		case 2:
++			ptxservq = &(psta->sta_xmitpriv.bk_q);
++			phwxmit = pxmitpriv->hwxmits + 3;
++			break;
++
++		case 4:
++		case 5:
++			ptxservq = &(psta->sta_xmitpriv.vi_q);
++			phwxmit = pxmitpriv->hwxmits + 1;
++			break;
++
++		case 6:
++		case 7:
++			ptxservq = &(psta->sta_xmitpriv.vo_q);
++			phwxmit = pxmitpriv->hwxmits;
++			break;
++
++		case 0:
++		case 3:
++		default:
++			ptxservq = &(psta->sta_xmitpriv.be_q);
++			phwxmit = pxmitpriv->hwxmits + 2;
++			break;
++	}
++
++	_enter_critical_bh(&pxmitpriv->lock, &irqL);
++
++	xmitframe_phead = get_list_head(&ptxservq->sta_pending);
++	xmitframe_plist = get_next(xmitframe_phead);
++	while (rtw_end_of_queue_search(xmitframe_phead, xmitframe_plist) == _FALSE)
++	{
++		pxmitframe = LIST_CONTAINOR(xmitframe_plist, struct xmit_frame, list);
++		xmitframe_plist = get_next(xmitframe_plist);
++
++		len = xmitframe_need_length(pxmitframe) + TXDESC_SIZE; // no offset
++		if (pbuf + len > MAX_XMITBUF_SZ) break;
++
++		rtw_list_delete(&pxmitframe->list);
++		ptxservq->qcnt--;
++		phwxmit->accnt--;
++
++#ifndef IDEA_CONDITION
++		// suppose only data frames would be in queue
++		if (pxmitframe->frame_tag != DATA_FRAMETAG) {
++			RT_TRACE(_module_rtl8192c_xmit_c_, _drv_err_,
++				 ("xmitframe_complete: frame tag(%d) is not DATA_FRAMETAG(%d)!\n",
++				  pxmitframe->frame_tag, DATA_FRAMETAG));
++			rtw_free_xmitframe(pxmitpriv, pxmitframe);
++			continue;
++		}
++
++		// TID 0~15
++		if ((pxmitframe->attrib.priority < 0) ||
++		    (pxmitframe->attrib.priority > 15)) {
++			RT_TRACE(_module_rtl8192c_xmit_c_, _drv_err_,
++				 ("xmitframe_complete: TID(%d) should be 0~15!\n",
++				  pxmitframe->attrib.priority));
++			rtw_free_xmitframe(pxmitpriv, pxmitframe);
++			continue;
++		}
++#endif
++
++//		pxmitframe->pxmitbuf = pxmitbuf;
++		pxmitframe->buf_addr = pxmitbuf->pbuf + pbuf;
++
++		pxmitframe->agg_num = 0; // not first frame of aggregation
++		pxmitframe->pkt_offset = 0; // not first frame of aggregation, no need to reserve offset
++
++		if (rtw_xmitframe_coalesce(padapter, pxmitframe->pkt, pxmitframe) == _FALSE) {
++			DBG_871X("%s coalesce failed \n",__FUNCTION__);
++			rtw_free_xmitframe(pxmitpriv, pxmitframe);
++			continue;
++		}
++
++		// always return ndis_packet after rtw_xmitframe_coalesce
++		rtw_os_xmit_complete(padapter, pxmitframe);
++
++		// (len - TXDESC_SIZE) == pxmitframe->attrib.last_txcmdsz
++		update_txdesc(pxmitframe, pxmitframe->buf_addr, pxmitframe->attrib.last_txcmdsz, _TRUE);
++
++		// don't need xmitframe any more
++		rtw_free_xmitframe(pxmitpriv, pxmitframe);
++
++		// handle pointer and stop condition
++		pbuf_tail = pbuf + len;
++		pbuf = _RND8(pbuf_tail);
++
++		pfirstframe->agg_num++;
++		if (MAX_TX_AGG_PACKET_NUMBER == pfirstframe->agg_num)
++			break;
++
++		if (pbuf < bulkPtr) {
++			descCount++;
++			if (descCount == pHalData->UsbTxAggDescNum)
++				break;
++		} else {
++			descCount = 0;
++			bulkPtr = ((pbuf / bulkSize) + 1) * bulkSize;
++		}
++	}
++	if (_rtw_queue_empty(&ptxservq->sta_pending) == _TRUE)
++		rtw_list_delete(&ptxservq->tx_pending);
++
++	_exit_critical_bh(&pxmitpriv->lock, &irqL);
++
++	if ((pfirstframe->attrib.ether_type != 0x0806) &&
++	    (pfirstframe->attrib.ether_type != 0x888e) &&
++	    (pfirstframe->attrib.dhcp_pkt != 1))
++	{
++		rtw_issue_addbareq_cmd(padapter, pfirstframe);
++	}
++
++#ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX
++	//3 3. update first frame txdesc
++	if ((pbuf_tail % bulkSize) == 0) {
++		// remove pkt_offset
++		pbuf_tail -= PACKET_OFFSET_SZ;
++		pfirstframe->buf_addr += PACKET_OFFSET_SZ;
++		pfirstframe->pkt_offset = 0;
++	}
++#endif	// CONFIG_USE_USB_BUFFER_ALLOC_TX
++	update_txdesc(pfirstframe, pfirstframe->buf_addr, pfirstframe->attrib.last_txcmdsz, _TRUE);
++
++	//3 4. write xmit buffer to USB FIFO
++	ff_hwaddr = rtw_get_ff_hwaddr(pfirstframe);
++
++	// xmit address == ((xmit_frame*)pxmitbuf->priv_data)->buf_addr
++	rtw_write_port(padapter, ff_hwaddr, pbuf_tail, (u8*)pxmitbuf);
++
++
++	//3 5. update statisitc
++	pbuf_tail -= (pfirstframe->agg_num * TXDESC_SIZE);
++	if (pfirstframe->pkt_offset == 1) pbuf_tail -= PACKET_OFFSET_SZ;
++	
++	rtw_count_tx_stats(padapter, pfirstframe, pbuf_tail);
++
++	rtw_free_xmitframe(pxmitpriv, pfirstframe);
++
++	return _TRUE;
++}
++
++#else
++
++s32 rtl8192cu_xmitframe_complete(_adapter *padapter, struct xmit_priv *pxmitpriv, struct xmit_buf *pxmitbuf)
++{		
++
++	struct hw_xmit *phwxmits;
++	sint hwentry;
++	struct xmit_frame *pxmitframe=NULL;	
++	int res=_SUCCESS, xcnt = 0;
++
++	phwxmits = pxmitpriv->hwxmits;
++	hwentry = pxmitpriv->hwxmit_entry;
++
++	RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("xmitframe_complete()\n"));
++
++	if(pxmitbuf==NULL)
++	{
++		pxmitbuf = rtw_alloc_xmitbuf(pxmitpriv);		
++		if(!pxmitbuf)
++		{
++			return _FALSE;
++		}			
++	}	
++
++
++	do
++	{		
++		pxmitframe =  rtw_dequeue_xframe(pxmitpriv, phwxmits, hwentry);
++		
++		if(pxmitframe)
++		{
++			pxmitframe->pxmitbuf = pxmitbuf;				
++
++			pxmitframe->buf_addr = pxmitbuf->pbuf;
++
++			pxmitbuf->priv_data = pxmitframe;	
++
++			if((pxmitframe->frame_tag&0x0f) == DATA_FRAMETAG)
++			{	
++				if(pxmitframe->attrib.priority<=15)//TID0~15
++				{
++					res = rtw_xmitframe_coalesce(padapter, pxmitframe->pkt, pxmitframe);
++				}	
++							
++				rtw_os_xmit_complete(padapter, pxmitframe);//always return ndis_packet after rtw_xmitframe_coalesce 			
++			}
++
++				
++			RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("xmitframe_complete(): rtw_dump_xframe\n"));
++
++			
++			if(res == _SUCCESS)
++			{
++				rtw_dump_xframe(padapter, pxmitframe);
++			}
++			else
++			{
++				rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
++				rtw_free_xmitframe(pxmitpriv, pxmitframe);	
++			}
++	 			 		
++			xcnt++;
++			
++		}
++		else
++		{			
++			rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
++			return _FALSE;
++		}
++
++		break;
++		
++	}while(0/*xcnt < (NR_XMITFRAME >> 3)*/);
++
++	return _TRUE;
++	
++}
++#endif
++
++
++
++static s32 xmitframe_direct(_adapter *padapter, struct xmit_frame *pxmitframe)
++{
++	s32 res = _SUCCESS;
++
++
++	res = rtw_xmitframe_coalesce(padapter, pxmitframe->pkt, pxmitframe);
++	if (res == _SUCCESS) {
++		rtw_dump_xframe(padapter, pxmitframe);
++	}
++
++	return res;
++}
++
++/*
++ * Return
++ *	_TRUE	dump packet directly
++ *	_FALSE	enqueue packet
++ */
++static s32 pre_xmitframe(_adapter *padapter, struct xmit_frame *pxmitframe)
++{
++        _irqL irqL;
++	s32 res;
++	struct xmit_buf *pxmitbuf = NULL;
++	struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
++	struct pkt_attrib *pattrib = &pxmitframe->attrib;
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	
++	
++	_enter_critical_bh(&pxmitpriv->lock, &irqL);
++
++
++	if (rtw_txframes_sta_ac_pending(padapter, pattrib) > 0)
++		goto enqueue;
++
++
++	if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == _TRUE)
++		goto enqueue;
++
++#ifdef CONFIG_CONCURRENT_MODE	
++	if (check_buddy_fwstate(padapter, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == _TRUE)
++		goto enqueue;
++#endif
++
++	pxmitbuf = rtw_alloc_xmitbuf(pxmitpriv);
++	if (pxmitbuf == NULL)
++		goto enqueue;
++
++	_exit_critical_bh(&pxmitpriv->lock, &irqL);
++
++	pxmitframe->pxmitbuf = pxmitbuf;
++	pxmitframe->buf_addr = pxmitbuf->pbuf;
++	pxmitbuf->priv_data = pxmitframe;
++
++	if (xmitframe_direct(padapter, pxmitframe) != _SUCCESS) {
++		rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
++		rtw_free_xmitframe(pxmitpriv, pxmitframe);
++	}
++
++	return _TRUE;
++
++enqueue:
++	res = rtw_xmitframe_enqueue(padapter, pxmitframe);
++	_exit_critical_bh(&pxmitpriv->lock, &irqL);
++
++	if (res != _SUCCESS) {
++		RT_TRACE(_module_xmit_osdep_c_, _drv_err_, ("pre_xmitframe: enqueue xmitframe fail\n"));
++		rtw_free_xmitframe(pxmitpriv, pxmitframe);
++
++		// Trick, make the statistics correct
++		pxmitpriv->tx_pkts--;
++		pxmitpriv->tx_drop++;
++		return _TRUE;
++	}
++
++	return _FALSE;
++}
++
++s32 rtl8192cu_mgnt_xmit(_adapter *padapter, struct xmit_frame *pmgntframe)
++{
++	return rtw_dump_xframe(padapter, pmgntframe);
++}
++
++/*
++ * Return
++ *	_TRUE	dump packet directly ok
++ *	_FALSE	temporary can't transmit packets to hardware
++ */
++s32 rtl8192cu_hal_xmit(_adapter *padapter, struct xmit_frame *pxmitframe)
++{
++	return pre_xmitframe(padapter, pxmitframe);
++}
++
++s32	 rtl8192cu_hal_xmitframe_enqueue(_adapter *padapter, struct xmit_frame *pxmitframe)
++{
++	struct xmit_priv 	*pxmitpriv = &padapter->xmitpriv;
++	s32 err;
++	
++	if ((err=rtw_xmitframe_enqueue(padapter, pxmitframe)) != _SUCCESS) 
++	{
++		rtw_free_xmitframe(pxmitpriv, pxmitframe);
++
++		// Trick, make the statistics correct
++		pxmitpriv->tx_pkts--;
++		pxmitpriv->tx_drop++;					
++	}
++	else
++	{
++#ifdef PLATFORM_LINUX
++		tasklet_hi_schedule(&pxmitpriv->xmit_tasklet);
++#endif
++	}
++	
++	return err;
++	
++}
++
++#ifdef  CONFIG_HOSTAPD_MLME
++
++static void rtl8192cu_hostap_mgnt_xmit_cb(struct urb *urb)
++{	
++#ifdef PLATFORM_LINUX
++	struct sk_buff *skb = (struct sk_buff *)urb->context;
++
++	//DBG_8192C("%s\n", __FUNCTION__);
++
++	rtw_skb_free(skb);
++#endif	
++}
++
++s32 rtl8192cu_hostap_mgnt_xmit_entry(_adapter *padapter, _pkt *pkt)
++{
++#ifdef PLATFORM_LINUX
++	u16 fc;
++	int rc, len, pipe;	
++	unsigned int bmcst, tid, qsel;
++	struct sk_buff *skb, *pxmit_skb;
++	struct urb *urb;
++	unsigned char *pxmitbuf;
++	struct tx_desc *ptxdesc;
++	struct rtw_ieee80211_hdr *tx_hdr;
++	struct hostapd_priv *phostapdpriv = padapter->phostapdpriv;	
++	struct net_device *pnetdev = padapter->pnetdev;
++	HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
++	struct dvobj_priv *pdvobj = adapter_to_dvobj(padapter);	
++
++	
++	//DBG_8192C("%s\n", __FUNCTION__);
++
++	skb = pkt;
++	
++	len = skb->len;
++	tx_hdr = (struct rtw_ieee80211_hdr *)(skb->data);
++	fc = le16_to_cpu(tx_hdr->frame_ctl);
++	bmcst = IS_MCAST(tx_hdr->addr1);
++
++	if ((fc & RTW_IEEE80211_FCTL_FTYPE) != RTW_IEEE80211_FTYPE_MGMT)
++		goto _exit;
++
++	pxmit_skb = rtw_skb_alloc(len + TXDESC_SIZE);
++
++	if(!pxmit_skb)
++		goto _exit;
++
++	pxmitbuf = pxmit_skb->data;
++
++	urb = usb_alloc_urb(0, GFP_ATOMIC);
++	if (!urb) {
++		goto _exit;
++	}
++
++	// ----- fill tx desc -----	
++	ptxdesc = (struct tx_desc *)pxmitbuf;	
++	_rtw_memset(ptxdesc, 0, sizeof(*ptxdesc));
++		
++	//offset 0	
++	ptxdesc->txdw0 |= cpu_to_le32(len&0x0000ffff); 
++	ptxdesc->txdw0 |= cpu_to_le32(((TXDESC_SIZE+OFFSET_SZ)<<OFFSET_SHT)&0x00ff0000);//default = 32 bytes for TX Desc
++	ptxdesc->txdw0 |= cpu_to_le32(OWN | FSG | LSG);
++
++	if(bmcst)	
++	{
++		ptxdesc->txdw0 |= cpu_to_le32(BIT(24));
++	}	
++
++	//offset 4	
++	ptxdesc->txdw1 |= cpu_to_le32(0x00);//MAC_ID
++
++	ptxdesc->txdw1 |= cpu_to_le32((0x12<<QSEL_SHT)&0x00001f00);
++
++	ptxdesc->txdw1 |= cpu_to_le32((0x06<< 16) & 0x000f0000);//b mode
++
++	//offset 8			
++
++	//offset 12		
++	ptxdesc->txdw3 |= cpu_to_le32((le16_to_cpu(tx_hdr->seq_ctl)<<16)&0xffff0000);
++
++	//offset 16		
++	ptxdesc->txdw4 |= cpu_to_le32(BIT(8));//driver uses rate
++		
++	//offset 20
++
++
++	//HW append seq
++	ptxdesc->txdw4 |= cpu_to_le32(BIT(7)); // Hw set sequence number
++	ptxdesc->txdw3 |= cpu_to_le32((8 <<28)); //set bit3 to 1. Suugested by TimChen. 2009.12.29.
++	
++
++	rtl8192cu_cal_txdesc_chksum(ptxdesc);
++	// ----- end of fill tx desc -----
++
++	//
++	skb_put(pxmit_skb, len + TXDESC_SIZE);
++	pxmitbuf = pxmitbuf + TXDESC_SIZE;
++	_rtw_memcpy(pxmitbuf, skb->data, len);
++
++	//DBG_8192C("mgnt_xmit, len=%x\n", pxmit_skb->len);
++
++
++	// ----- prepare urb for submit -----
++	
++	//translate DMA FIFO addr to pipehandle
++	//pipe = ffaddr2pipehdl(pdvobj, MGT_QUEUE_INX);
++	pipe = usb_sndbulkpipe(pdvobj->pusbdev, pHalData->Queue2EPNum[(u8)MGT_QUEUE_INX]&0x0f);
++	
++	usb_fill_bulk_urb(urb, pdvobj->pusbdev, pipe,
++			  pxmit_skb->data, pxmit_skb->len, rtl8192cu_hostap_mgnt_xmit_cb, pxmit_skb);
++	
++	urb->transfer_flags |= URB_ZERO_PACKET;
++	usb_anchor_urb(urb, &phostapdpriv->anchored);
++	rc = usb_submit_urb(urb, GFP_ATOMIC);
++	if (rc < 0) {
++		usb_unanchor_urb(urb);
++		kfree_skb(skb);
++	}
++	usb_free_urb(urb);
++
++	
++_exit:	
++	
++	rtw_skb_free(skb);
++
++#endif
++
++	return 0;
++
++}
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/usb_halinit.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/usb_halinit.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/usb_halinit.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/usb_halinit.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,6261 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _HCI_HAL_INIT_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <rtw_efuse.h>
++
++#include <rtl8192c_hal.h>
++#include <rtl8192c_led.h>
++
++#ifdef DBG_CONFIG_ERROR_DETECT
++#include "rtl8192c_sreset.h"
++#endif
++
++#ifdef CONFIG_IOL
++#include <rtw_iol.h>
++#endif
++
++#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS)
++
++#error "Shall be Linux or Windows, but not both!\n"
++
++#endif
++
++#ifndef CONFIG_USB_HCI
++
++#error "CONFIG_USB_HCI shall be on!\n"
++
++#endif
++
++#include <usb_ops.h>
++#include <usb_hal.h>
++#include <usb_osintf.h>
++
++#if DISABLE_BB_RF
++	#define		HAL_MAC_ENABLE	0
++	#define		HAL_BB_ENABLE		0
++	#define		HAL_RF_ENABLE		0
++#else
++	#define		HAL_MAC_ENABLE	1
++	#define		HAL_BB_ENABLE		1
++	#define		HAL_RF_ENABLE		1
++#endif
++
++//endpoint number 1,2,3,4,5
++// bult in : 1
++// bult out: 2 (High)
++// bult out: 3 (Normal) for 3 out_ep, (Low) for 2 out_ep
++// interrupt in: 4
++// bult out: 5 (Low) for 3 out_ep
++
++
++static VOID
++_OneOutEpMapping(
++	IN	HAL_DATA_TYPE	*pHalData
++	)
++{
++	//only endpoint number 0x02
++
++	pHalData->Queue2EPNum[0] = pHalData->RtBulkOutPipe[0];//VO
++	pHalData->Queue2EPNum[1] = pHalData->RtBulkOutPipe[0];//VI
++	pHalData->Queue2EPNum[2] = pHalData->RtBulkOutPipe[0];//BE
++	pHalData->Queue2EPNum[3] = pHalData->RtBulkOutPipe[0];//BK
++	
++	pHalData->Queue2EPNum[4] = pHalData->RtBulkOutPipe[0];//BCN
++	pHalData->Queue2EPNum[5] = pHalData->RtBulkOutPipe[0];//MGT
++	pHalData->Queue2EPNum[6] = pHalData->RtBulkOutPipe[0];//HIGH
++	pHalData->Queue2EPNum[7] = pHalData->RtBulkOutPipe[0];//TXCMD
++}
++
++
++static VOID
++_TwoOutEpMapping(
++	IN	HAL_DATA_TYPE	*pHalData,
++	IN	BOOLEAN	 		bWIFICfg
++	)
++{
++
++/*
++#define VO_QUEUE_INX		0
++#define VI_QUEUE_INX		1
++#define BE_QUEUE_INX		2
++#define BK_QUEUE_INX		3
++#define BCN_QUEUE_INX	4
++#define MGT_QUEUE_INX	5
++#define HIGH_QUEUE_INX	6
++#define TXCMD_QUEUE_INX	7
++*/
++	if(bWIFICfg){ // Normal chip && wmm
++		
++		//	BK, 	BE, 	VI, 	VO, 	BCN,	CMD,MGT,HIGH,HCCA 
++		//{  0, 	1, 	0, 	1, 	0, 	0, 	0, 	0, 		0	};
++		//0:H(end_number=0x02), 1:L (end_number=0x03)
++
++		pHalData->Queue2EPNum[0] = pHalData->RtBulkOutPipe[1];//VO
++		pHalData->Queue2EPNum[1] = pHalData->RtBulkOutPipe[0];//VI
++		pHalData->Queue2EPNum[2] = pHalData->RtBulkOutPipe[1];//BE
++		pHalData->Queue2EPNum[3] = pHalData->RtBulkOutPipe[0];//BK
++		
++		pHalData->Queue2EPNum[4] = pHalData->RtBulkOutPipe[0];//BCN
++		pHalData->Queue2EPNum[5] = pHalData->RtBulkOutPipe[0];//MGT
++		pHalData->Queue2EPNum[6] = pHalData->RtBulkOutPipe[0];//HIGH
++		pHalData->Queue2EPNum[7] = pHalData->RtBulkOutPipe[0];//TXCMD
++	}
++	else{//typical setting
++		
++		//BK, 	BE, 	VI, 	VO, 	BCN,	CMD,MGT,HIGH,HCCA 
++		//{  1, 	1, 	0, 	0, 	0, 	0, 	0, 	0, 		0	};			
++		//0:H(end_number=0x02), 1:L (end_number=0x03)
++
++		pHalData->Queue2EPNum[0] = pHalData->RtBulkOutPipe[0];//VO
++		pHalData->Queue2EPNum[1] = pHalData->RtBulkOutPipe[0];//VI
++		pHalData->Queue2EPNum[2] = pHalData->RtBulkOutPipe[1];//BE
++		pHalData->Queue2EPNum[3] = pHalData->RtBulkOutPipe[1];//BK
++		
++		pHalData->Queue2EPNum[4] = pHalData->RtBulkOutPipe[0];//BCN
++		pHalData->Queue2EPNum[5] = pHalData->RtBulkOutPipe[0];//MGT
++		pHalData->Queue2EPNum[6] = pHalData->RtBulkOutPipe[0];//HIGH
++		pHalData->Queue2EPNum[7] = pHalData->RtBulkOutPipe[0];//TXCMD
++	}
++	
++}
++
++
++static VOID _ThreeOutEpMapping(
++	IN	HAL_DATA_TYPE	*pHalData,
++	IN	BOOLEAN	 		bWIFICfg
++	)
++{
++	if(bWIFICfg){//for WMM
++
++		//	BK, 	BE, 	VI, 	VO, 	BCN,	CMD,MGT,HIGH,HCCA 
++		//{  1, 	2, 	1, 	0, 	0, 	0, 	0, 	0, 		0	};
++		//0:H(end_number=0x02), 1:N(end_number=0x03), 2:L (end_number=0x05)
++
++		pHalData->Queue2EPNum[0] = pHalData->RtBulkOutPipe[0];//VO
++		pHalData->Queue2EPNum[1] = pHalData->RtBulkOutPipe[1];//VI
++		pHalData->Queue2EPNum[2] = pHalData->RtBulkOutPipe[2];//BE
++		pHalData->Queue2EPNum[3] = pHalData->RtBulkOutPipe[1];//BK
++		
++		pHalData->Queue2EPNum[4] = pHalData->RtBulkOutPipe[0];//BCN
++		pHalData->Queue2EPNum[5] = pHalData->RtBulkOutPipe[0];//MGT
++		pHalData->Queue2EPNum[6] = pHalData->RtBulkOutPipe[0];//HIGH
++		pHalData->Queue2EPNum[7] = pHalData->RtBulkOutPipe[0];//TXCMD
++	}
++	else{//typical setting
++
++		//	BK, 	BE, 	VI, 	VO, 	BCN,	CMD,MGT,HIGH,HCCA 
++		//{  2, 	2, 	1, 	0, 	0, 	0, 	0, 	0, 		0	};			
++		//0:H(end_number=0x02), 1:N(end_number=0x03), 2:L (end_number=0x05)
++		pHalData->Queue2EPNum[0] = pHalData->RtBulkOutPipe[0];//VO
++		pHalData->Queue2EPNum[1] = pHalData->RtBulkOutPipe[1];//VI
++		pHalData->Queue2EPNum[2] = pHalData->RtBulkOutPipe[2];//BE
++		pHalData->Queue2EPNum[3] = pHalData->RtBulkOutPipe[2];//BK
++		
++		pHalData->Queue2EPNum[4] = pHalData->RtBulkOutPipe[0];//BCN
++		pHalData->Queue2EPNum[5] = pHalData->RtBulkOutPipe[0];//MGT
++		pHalData->Queue2EPNum[6] = pHalData->RtBulkOutPipe[0];//HIGH
++		pHalData->Queue2EPNum[7] = pHalData->RtBulkOutPipe[0];//TXCMD
++	}
++
++}
++
++static BOOLEAN
++_MappingOutEP(
++	IN	PADAPTER	pAdapter,
++	IN	u8		NumOutPipe
++	)
++{		
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	struct registry_priv *pregistrypriv = &pAdapter->registrypriv;
++
++	BOOLEAN	 bWIFICfg = (pregistrypriv->wifi_spec) ?_TRUE:_FALSE;
++	
++	BOOLEAN result = _TRUE;
++
++	switch(NumOutPipe)
++	{
++		case 2:
++			_TwoOutEpMapping(pHalData, bWIFICfg);
++			break;
++		case 3:		
++			_ThreeOutEpMapping(pHalData, bWIFICfg);
++			break;
++		case 1:
++			_OneOutEpMapping(pHalData);
++			break;
++		default:
++			result = _FALSE;
++			break;
++	}
++
++	return result;
++	
++}
++
++static VOID
++_ConfigChipOutEP(
++	IN	PADAPTER	pAdapter,
++	IN	u8		NumOutPipe
++	)
++{
++	u8			value8;
++	HAL_DATA_TYPE	*pHalData	= GET_HAL_DATA(pAdapter);
++
++	pHalData->OutEpQueueSel = 0;
++	pHalData->OutEpNumber	= 0;
++		
++	// Normal and High queue
++	value8 = rtw_read8(pAdapter, (REG_NORMAL_SIE_EP + 1));
++	
++	if(value8 & USB_NORMAL_SIE_EP_MASK){
++		pHalData->OutEpQueueSel |= TX_SELE_HQ;
++		pHalData->OutEpNumber++;
++	}
++
++#ifdef CONFIG_USB_ONE_OUT_EP
++		return;
++#endif
++		
++	if((value8 >> USB_NORMAL_SIE_EP_SHIFT) & USB_NORMAL_SIE_EP_MASK){
++		pHalData->OutEpQueueSel |= TX_SELE_NQ;
++		pHalData->OutEpNumber++;
++	}
++	
++	// Low queue
++	value8 = rtw_read8(pAdapter, (REG_NORMAL_SIE_EP + 2));
++	if(value8 & USB_NORMAL_SIE_EP_MASK){
++		pHalData->OutEpQueueSel |= TX_SELE_LQ;
++		pHalData->OutEpNumber++;
++	}
++
++	// TODO: Error recovery for this case
++	//RT_ASSERT((NumOutPipe == pHalData->OutEpNumber), ("Out EP number isn't match! %d(Descriptor) != %d (SIE reg)\n", (u4Byte)NumOutPipe, (u4Byte)pHalData->OutEpNumber));
++
++}
++
++static BOOLEAN HalUsbSetQueuePipeMapping8192CUsb(
++	IN	PADAPTER	pAdapter,
++	IN	u8		NumInPipe,
++	IN	u8		NumOutPipe
++	)
++{
++	HAL_DATA_TYPE	*pHalData	= GET_HAL_DATA(pAdapter);
++	BOOLEAN			result		= _FALSE;
++
++	_ConfigChipOutEP(pAdapter, NumOutPipe);
++
++	#ifndef CONFIG_USB_ONE_OUT_EP
++	// Normal chip with one IN and one OUT doesn't have interrupt IN EP.
++	if(1 == pHalData->OutEpNumber){
++		if(1 != NumInPipe){
++			return result;
++		}
++	}
++	#endif
++	result = _MappingOutEP(pAdapter, NumOutPipe);
++	
++	return result;
++
++}
++
++void rtl8192cu_interface_configure(_adapter *padapter)
++{
++	HAL_DATA_TYPE	*pHalData	= GET_HAL_DATA(padapter);
++	struct dvobj_priv	*pdvobjpriv = adapter_to_dvobj(padapter);
++
++	if (pdvobjpriv->ishighspeed == _TRUE)
++	{
++		pHalData->UsbBulkOutSize = USB_HIGH_SPEED_BULK_SIZE;//512 bytes
++	}
++	else
++	{
++		pHalData->UsbBulkOutSize = USB_FULL_SPEED_BULK_SIZE;//64 bytes
++	}
++
++	pHalData->interfaceIndex = pdvobjpriv->InterfaceNumber;
++	pHalData->RtBulkInPipe = pdvobjpriv->ep_num[0];
++	pHalData->RtBulkOutPipe[0] = pdvobjpriv->ep_num[1];
++	pHalData->RtBulkOutPipe[1] = pdvobjpriv->ep_num[2];
++	pHalData->RtIntInPipe = pdvobjpriv->ep_num[3];
++	pHalData->RtBulkOutPipe[2] = pdvobjpriv->ep_num[4];
++
++#ifdef CONFIG_USB_TX_AGGREGATION
++	pHalData->UsbTxAggMode		= 1;
++	pHalData->UsbTxAggDescNum	= 0x6;	// only 4 bits
++#endif
++
++#ifdef CONFIG_USB_RX_AGGREGATION
++	pHalData->UsbRxAggMode		= USB_RX_AGG_DMA;// USB_RX_AGG_DMA;
++	pHalData->UsbRxAggBlockCount	= 8; //unit : 512b
++	pHalData->UsbRxAggBlockTimeout	= 0x6;
++	pHalData->UsbRxAggPageCount	= 48; //uint :128 b //0x0A;	// 10 = MAX_RX_DMA_BUFFER_SIZE/2/pHalData->UsbBulkOutSize
++	pHalData->UsbRxAggPageTimeout	= 0x4; //6, absolute time = 34ms/(2^6)
++#endif
++
++	HalUsbSetQueuePipeMapping8192CUsb(padapter, pdvobjpriv->RtNumInPipes,
++		#ifdef CONFIG_USB_ONE_OUT_EP
++		1
++		#else
++		pdvobjpriv->RtNumOutPipes
++		#endif
++		);
++
++}
++
++static u8 _InitPowerOn(_adapter *padapter)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++	u8	ret = _SUCCESS;
++	u16	value16=0;
++	u8	value8 = 0;
++	u32  value32 = 0;
++
++	// polling autoload done.
++	u32	pollingCount = 0;
++
++	do
++	{
++		if(rtw_read8(padapter, REG_APS_FSMCO) & PFM_ALDN){
++			//RT_TRACE(COMP_INIT,DBG_LOUD,("Autoload Done!\n"));
++			break;
++		}
++
++		if(pollingCount++ > POLLING_READY_TIMEOUT_COUNT){
++			//RT_TRACE(COMP_INIT,DBG_SERIOUS,("Failed to polling REG_APS_FSMCO[PFM_ALDN] done!\n"));
++			return _FAIL;
++		}
++				
++	}while(_TRUE);
++
++
++//	For hardware power on sequence.
++
++	//0.	RSV_CTRL 0x1C[7:0] = 0x00			// unlock ISO/CLK/Power control register
++	rtw_write8(padapter, REG_RSV_CTRL, 0x0);	
++	// Power on when re-enter from IPS/Radio off/card disable
++	rtw_write8(padapter, REG_SPS0_CTRL, 0x2b);//enable SPS into PWM mode
++/*
++	value16 = PlatformIORead2Byte(Adapter, REG_AFE_XTAL_CTRL);//enable AFE clock
++	value16 &=  (~XTAL_GATE_AFE);
++	PlatformIOWrite2Byte(Adapter,REG_AFE_XTAL_CTRL, value16 );		
++*/
++	
++	rtw_udelay_os(100);//PlatformSleepUs(150);//this is not necessary when initially power on
++
++	value8 = rtw_read8(padapter, REG_LDOV12D_CTRL);	
++	if(0== (value8 & LDV12_EN) ){
++		value8 |= LDV12_EN;
++		rtw_write8(padapter, REG_LDOV12D_CTRL, value8);	
++		//RT_TRACE(COMP_INIT, DBG_LOUD, (" power-on :REG_LDOV12D_CTRL Reg0x21:0x%02x.\n",value8));
++		rtw_udelay_os(100);//PlatformSleepUs(100);//this is not necessary when initially power on
++		value8 = rtw_read8(padapter, REG_SYS_ISO_CTRL);
++		value8 &= ~ISO_MD2PP;
++		rtw_write8(padapter, REG_SYS_ISO_CTRL, value8);			
++	}	
++	
++	// auto enable WLAN
++	pollingCount = 0;
++	value16 = rtw_read16(padapter, REG_APS_FSMCO);
++	value16 |= APFM_ONMAC;
++	rtw_write16(padapter, REG_APS_FSMCO, value16);
++
++	do
++	{
++		if(0 == (rtw_read16(padapter, REG_APS_FSMCO) & APFM_ONMAC)){
++			//RT_TRACE(COMP_INIT,DBG_LOUD,("MAC auto ON okay!\n"));
++			break;
++		}
++
++		if(pollingCount++ > POLLING_READY_TIMEOUT_COUNT){
++			//RT_TRACE(COMP_INIT,DBG_SERIOUS,("Failed to polling REG_APS_FSMCO[APFM_ONMAC] done!\n"));
++			return _FAIL;
++		}
++				
++	}while(_TRUE);
++
++	//Enable Radio ,GPIO ,and LED function
++	rtw_write16(padapter,REG_APS_FSMCO,0x0812);
++
++#ifdef CONFIG_AUTOSUSPEND
++	//for usb Combo card ,BT
++	if((BOARD_USB_COMBO == pHalData->BoardType)&&(padapter->registrypriv.usbss_enable))
++	{
++		value32 =  rtw_read32(padapter, REG_APS_FSMCO);
++		value32 |= (SOP_ABG|SOP_AMB|XOP_BTCK);
++		rtw_write32(padapter, REG_APS_FSMCO, value32);		
++	}
++#endif	
++
++	// release RF digital isolation
++	value16 = rtw_read16(padapter, REG_SYS_ISO_CTRL);
++	value16 &= ~ISO_DIOR;
++	rtw_write16(padapter, REG_SYS_ISO_CTRL, value16);
++
++	// Enable MAC DMA/WMAC/SCHEDULE/SEC block
++	value16 = rtw_read16(padapter, REG_CR);
++	value16 |= (HCI_TXDMA_EN | HCI_RXDMA_EN | TXDMA_EN | RXDMA_EN
++				| PROTOCOL_EN | SCHEDULE_EN | MACTXEN | MACRXEN | ENSEC);
++	rtw_write16(padapter, REG_CR, value16);
++	
++	//tynli_test for suspend mode.
++	{
++		rtw_write8(padapter,  0xfe10, 0x19);
++	}
++
++	// 2010/11/22 MH For slim combo debug mode check.
++	if (pHalData->BoardType == BOARD_USB_COMBO)
++	{
++		if (pHalData->SlimComboDbg == _TRUE)
++		{
++			DBG_8192C("SlimComboDbg == TRUE\n");
++
++			// 1. SIC?Test Mode ¤¤, Debug Ports ·|¦Û°Ê Enable, ©Ò¥H Driver ¤W¨Ó«á, 
++			//	­nÃö±¼½Ð³]©w 0x 00[7] -> "1", ±N¥¦ Disable.   effect if not: power consumption increase
++			rtw_write8(padapter, REG_SYS_ISO_CTRL, rtw_read8(padapter, REG_SYS_ISO_CTRL)|BIT7);
++
++			// 2. SIC?Test Mode ¤¤, GPIO-8?·| report Power State ©Ò¥H Driver ¤W¨Ó«á, ½Ð³]©w? 0x04[6] -> "1" ±N¥¦ Disable
++			// effect if not: GPIO-8 could not be GPIO or LED function
++			rtw_write8(padapter, REG_APS_FSMCO, rtw_read8(padapter, REG_APS_FSMCO)|BIT6);
++
++			// 3. SIC Test Mode ¤¤, EESK, EECS ·| report?Host Clock status, ©Ò¥H Driver ¤W¨Ó«á, ½Ð³]©w? 0x40[4] -> "1" ±N¥¦¤Á¦¨ EEPROM ¨Ï¥Î Pin (autoload still from Efuse)
++			//  effect if not:power consumption increase
++			value8 = rtw_read8(padapter, REG_GPIO_MUXCFG)|BIT4 ;
++		#ifdef CONFIG_BT_COEXIST	
++			// 2011/01/26 MH UMB-B cut bug. We need to support the modification.
++			if (IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID) &&
++				pHalData->bt_coexist.BT_Coexist)
++			{
++				value8 |= (BIT5);	
++			}
++		#endif
++			rtw_write8(padapter, REG_GPIO_MUXCFG,value8 );
++			
++			
++			// 4. SIC Test Mode ¤¤,?SIC Debug ports ·|¦Û°Ê Enable , ©Ò¥H Driver ¤W¨Ó«á°¨¤W, ½Ð³]©w? 0x40[15:11] -> ¡§0x00¡¨, ±N¥¦Disable
++			//  4.1Two Steps setting for safety: 0x40[15,13,12, 11] -> "0", then ?0x40[14] -> "0"
++			// effect if not: Host could not transfer packets, and GPIO-3,2 will occupied by SIC then Co-exist could not work.
++			rtw_write16(padapter, REG_GPIO_MUXCFG, (rtw_read16(padapter, REG_GPIO_MUXCFG)&0x07FF)|BIT14);
++			rtw_write16(padapter, REG_GPIO_MUXCFG, rtw_read16(padapter, REG_GPIO_MUXCFG)&0x07FF);
++		}
++	}
++
++
++	// 2011/02/18 To Fix RU LNA  power leakage problem. We need to execute below below in
++	// Adapter init and halt sequence. Accordingto EEchou's opinion, we can enable the ability for all
++	// IC. According to Johnny's opinion, only RU will meet the condition.
++	if (IS_HARDWARE_TYPE_8192C(padapter) && (pHalData->BoardType == BOARD_USB_High_PA))
++		rtw_write32(padapter, rFPGA0_XCD_RFParameter, rtw_read32(padapter, rFPGA0_XCD_RFParameter)&(~BIT1));
++	return ret;
++
++}
++
++
++static void _dbg_dump_macreg(_adapter *padapter)
++{
++	u32 offset = 0;
++	u32 val32 = 0;
++	u32 index =0 ;
++	for(index=0;index<64;index++)
++	{
++		offset = index*4;
++		val32 = rtw_read32(padapter,offset);
++		DBG_8192C("offset : 0x%02x ,val:0x%08x\n",offset,val32);
++	}
++}
++
++
++static void _InitPABias(_adapter *padapter)
++{
++	HAL_DATA_TYPE		*pHalData	= GET_HAL_DATA(padapter);
++	u8			pa_setting;
++	BOOLEAN		is92C = IS_92C_SERIAL(pHalData->VersionID);
++	
++	//FIXED PA current issue
++	//efuse_one_byte_read(padapter, 0x1FA, &pa_setting);
++	pa_setting = EFUSE_Read1Byte(padapter, 0x1FA);
++
++	//RT_TRACE(COMP_INIT, DBG_LOUD, ("_InitPABias 0x1FA 0x%x \n",pa_setting));
++
++	if(!(pa_setting & BIT0))
++	{
++		PHY_SetRFReg(padapter, RF_PATH_A, 0x15, 0x0FFFFF, 0x0F406);
++		PHY_SetRFReg(padapter, RF_PATH_A, 0x15, 0x0FFFFF, 0x4F406);		
++		PHY_SetRFReg(padapter, RF_PATH_A, 0x15, 0x0FFFFF, 0x8F406);		
++		PHY_SetRFReg(padapter, RF_PATH_A, 0x15, 0x0FFFFF, 0xCF406);		
++		//RT_TRACE(COMP_INIT, DBG_LOUD, ("PA BIAS path A\n"));
++	}	
++
++	if(!(pa_setting & BIT1) && is92C)
++	{
++		PHY_SetRFReg(padapter,RF_PATH_B, 0x15, 0x0FFFFF, 0x0F406);
++		PHY_SetRFReg(padapter,RF_PATH_B, 0x15, 0x0FFFFF, 0x4F406);		
++		PHY_SetRFReg(padapter,RF_PATH_B, 0x15, 0x0FFFFF, 0x8F406);		
++		PHY_SetRFReg(padapter,RF_PATH_B, 0x15, 0x0FFFFF, 0xCF406);
++		//RT_TRACE(COMP_INIT, DBG_LOUD, ("PA BIAS path B\n"));	
++	}
++
++	if(!(pa_setting & BIT4))
++	{
++		pa_setting = rtw_read8(padapter, 0x16);
++		pa_setting &= 0x0F;
++		rtw_write8(padapter, 0x16, pa_setting | 0x90);		
++	}
++}
++#ifdef CONFIG_BT_COEXIST
++static void _InitBTCoexist(_adapter *padapter)
++{
++	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(padapter);
++	struct btcoexist_priv	*pbtpriv = &(pHalData->bt_coexist);
++	u8 u1Tmp;
++
++	if(pbtpriv->BT_Coexist && pbtpriv->BT_CoexistType == BT_CSR_BC4)
++	{
++
++#if MP_DRIVER != 1
++		if(pbtpriv->BT_Ant_isolation)
++		{
++			rtw_write8( padapter,REG_GPIO_MUXCFG, 0xa0);
++			DBG_8192C("BT write 0x%x = 0x%x\n", REG_GPIO_MUXCFG, 0xa0);
++		}
++#endif		
++
++		u1Tmp = rtw_read8(padapter, 0x4fd) & BIT0;
++		u1Tmp = u1Tmp | 
++				((pbtpriv->BT_Ant_isolation==1)?0:BIT1) | 
++				((pbtpriv->BT_Service==BT_SCO)?0:BIT2);
++		rtw_write8( padapter, 0x4fd, u1Tmp);
++		DBG_8192C("BT write 0x%x = 0x%x for non-isolation\n", 0x4fd, u1Tmp);
++		
++		
++		rtw_write32(padapter, REG_BT_COEX_TABLE+4, 0xaaaa9aaa);
++		DBG_8192C("BT write 0x%x = 0x%x\n", REG_BT_COEX_TABLE+4, 0xaaaa9aaa);
++		
++		rtw_write32(padapter, REG_BT_COEX_TABLE+8, 0xffbd0040);
++		DBG_8192C("BT write 0x%x = 0x%x\n", REG_BT_COEX_TABLE+8, 0xffbd0040);
++
++		rtw_write32(padapter,  REG_BT_COEX_TABLE+0xc, 0x40000010);
++		DBG_8192C("BT write 0x%x = 0x%x\n", REG_BT_COEX_TABLE+0xc, 0x40000010);
++
++		//Config to 1T1R
++		u1Tmp =  rtw_read8(padapter,rOFDM0_TRxPathEnable);
++		u1Tmp &= ~(BIT1);
++		rtw_write8( padapter, rOFDM0_TRxPathEnable, u1Tmp);
++		DBG_8192C("BT write 0xC04 = 0x%x\n", u1Tmp);
++			
++		u1Tmp = rtw_read8(padapter, rOFDM1_TRxPathEnable);
++		u1Tmp &= ~(BIT1);
++		rtw_write8( padapter, rOFDM1_TRxPathEnable, u1Tmp);
++		DBG_8192C("BT write 0xD04 = 0x%x\n", u1Tmp);
++
++	}
++}
++#endif
++
++//-------------------------------------------------------------------------
++//
++// LLT R/W/Init function
++//
++//-------------------------------------------------------------------------
++static u8 _LLTWrite(
++	IN  PADAPTER	Adapter,
++	IN	u32		address,
++	IN	u32		data
++	)
++{
++	u8	status = _SUCCESS;
++	int 		count = 0;
++	u32 		value = _LLT_INIT_ADDR(address) | _LLT_INIT_DATA(data) | _LLT_OP(_LLT_WRITE_ACCESS);
++
++	rtw_write32(Adapter, REG_LLT_INIT, value);
++	
++	//polling
++	do{
++		
++		value = rtw_read32(Adapter, REG_LLT_INIT);
++		if(_LLT_NO_ACTIVE == _LLT_OP_VALUE(value)){
++			break;
++		}
++		
++		if(count > POLLING_LLT_THRESHOLD){
++			//RT_TRACE(COMP_INIT,DBG_SERIOUS,("Failed to polling write LLT done at address %d!\n", address));
++			status = _FAIL;
++			break;
++		}
++	}while(count++);
++
++	return status;
++	
++}
++
++
++static u8 _LLTRead(
++	IN  PADAPTER	Adapter,
++	IN	u32		address
++	)
++{
++	int		count = 0;
++	u32		value = _LLT_INIT_ADDR(address) | _LLT_OP(_LLT_READ_ACCESS);
++
++	rtw_write32(Adapter, REG_LLT_INIT, value);
++
++	//polling and get value
++	do{
++		
++		value = rtw_read32(Adapter, REG_LLT_INIT);
++		if(_LLT_NO_ACTIVE == _LLT_OP_VALUE(value)){
++			return (u8)value;
++		}
++		
++		if(count > POLLING_LLT_THRESHOLD){
++			//RT_TRACE(COMP_INIT,DBG_SERIOUS,("Failed to polling read LLT done at address %d!\n", address));
++			break;
++		}
++	}while(count++);
++
++	return 0xFF;
++
++}
++
++
++static u8 InitLLTTable(
++	IN  PADAPTER	Adapter,
++	IN	u32		boundary
++	)
++{
++	u8	status = _SUCCESS;
++	u32		i;
++
++#ifdef CONFIG_IOL_LLT
++	if(rtw_IOL_applied(Adapter))
++	{
++		struct xmit_frame	*xmit_frame;
++		if((xmit_frame=rtw_IOL_accquire_xmit_frame(Adapter)) == NULL)
++			return _FAIL;
++
++		rtw_IOL_append_LLT_cmd(xmit_frame, boundary);
++		status = rtw_IOL_exec_cmds_sync(Adapter, xmit_frame, 1000);
++	}
++	else
++#endif
++	{
++		for(i = 0 ; i < (boundary - 1) ; i++){
++			status = _LLTWrite(Adapter, i , i + 1);
++			if(_SUCCESS != status){
++				return status;
++			}
++		}
++
++		// end of list
++		status = _LLTWrite(Adapter, (boundary - 1), 0xFF); 
++		if(_SUCCESS != status){
++			return status;
++		}
++
++		// Make the other pages as ring buffer
++		// This ring buffer is used as beacon buffer if we config this MAC as two MAC transfer.
++		// Otherwise used as local loopback buffer. 
++		for(i = boundary ; i < LAST_ENTRY_OF_TX_PKT_BUFFER ; i++){
++			status = _LLTWrite(Adapter, i, (i + 1)); 
++			if(_SUCCESS != status){
++				return status;
++			}
++		}
++		
++		// Let last entry point to the start entry of ring buffer
++		status = _LLTWrite(Adapter, LAST_ENTRY_OF_TX_PKT_BUFFER, boundary);
++		if(_SUCCESS != status){
++			return status;
++		}
++	}
++
++	return status;
++	
++}
++
++
++//---------------------------------------------------------------
++//
++//	MAC init functions
++//
++//---------------------------------------------------------------
++static VOID
++_SetMacID(
++	IN  PADAPTER Adapter, u8* MacID
++	)
++{
++	u32 i;
++	for(i=0 ; i< MAC_ADDR_LEN ; i++){
++#ifdef  CONFIG_CONCURRENT_MODE		
++		if(Adapter->iface_type == IFACE_PORT1)
++			rtw_write32(Adapter, REG_MACID1+i, MacID[i]);
++		else
++#endif			
++		rtw_write32(Adapter, REG_MACID+i, MacID[i]);
++	}
++}
++
++static VOID
++_SetBSSID(
++	IN  PADAPTER Adapter, u8* BSSID
++	)
++{
++	u32 i;
++	for(i=0 ; i< MAC_ADDR_LEN ; i++){
++#ifdef  CONFIG_CONCURRENT_MODE		
++		if(Adapter->iface_type == IFACE_PORT1)
++			rtw_write32(Adapter, REG_BSSID1+i, BSSID[i]);
++		else
++#endif			
++		rtw_write32(Adapter, REG_BSSID+i, BSSID[i]);
++	}
++}
++
++
++// Shall USB interface init this?
++static VOID
++_InitInterrupt(
++	IN  PADAPTER Adapter
++	)
++{
++	u32	value32;
++
++	// HISR - turn all on
++	value32 = 0xFFFFFFFF;
++	rtw_write32(Adapter, REG_HISR, value32);
++
++	// HIMR - turn all on
++	rtw_write32(Adapter, REG_HIMR, value32);
++}
++
++
++static VOID
++_InitQueueReservedPage(
++	IN  PADAPTER Adapter
++	)
++{
++	HAL_DATA_TYPE	*pHalData	= GET_HAL_DATA(Adapter);
++	struct registry_priv *pregistrypriv = &Adapter->registrypriv;
++	
++	u32			outEPNum	= (u32)pHalData->OutEpNumber;
++	u32			numHQ		= 0;
++	u32			numLQ		= 0;
++	u32			numNQ		= 0;
++	u32			numPubQ;
++	u32			value32;
++	u8			value8;
++	BOOLEAN		bWiFiConfig	= pregistrypriv->wifi_spec;
++	//u32			txQPageNum, txQPageUnit,txQRemainPage;
++
++	{ //for WMM 
++		//RT_ASSERT((outEPNum>=2), ("for WMM ,number of out-ep must more than or equal to 2!\n"));
++
++		if(pHalData->OutEpQueueSel & TX_SELE_HQ){
++			numHQ = (bWiFiConfig)?WMM_NORMAL_PAGE_NUM_HPQ:NORMAL_PAGE_NUM_HPQ;
++		}
++
++		if(pHalData->OutEpQueueSel & TX_SELE_LQ){
++			numLQ = (bWiFiConfig)?WMM_NORMAL_PAGE_NUM_LPQ:NORMAL_PAGE_NUM_LPQ;
++		}
++		// NOTE: This step shall be proceed before writting REG_RQPN.	
++		if(pHalData->OutEpQueueSel & TX_SELE_NQ){
++			numNQ = (bWiFiConfig)?WMM_NORMAL_PAGE_NUM_NPQ:NORMAL_PAGE_NUM_NPQ;
++		}
++		value8 = (u8)_NPQ(numNQ);
++		rtw_write8(Adapter, REG_RQPN_NPQ, value8);
++
++		if (bWiFiConfig)
++			numPubQ = WMM_NORMAL_TX_TOTAL_PAGE_NUMBER - numHQ - numLQ - numNQ;
++		else
++			numPubQ = TX_TOTAL_PAGE_NUMBER - numHQ - numLQ - numNQ;
++	}
++
++	// TX DMA
++	value32 = _HPQ(numHQ) | _LPQ(numLQ) | _PUBQ(numPubQ) | LD_RQPN;	
++	rtw_write32(Adapter, REG_RQPN, value32);	
++}
++
++static VOID
++_InitTxBufferBoundary(
++	IN  PADAPTER Adapter
++	)
++{	
++	struct registry_priv *pregistrypriv = &Adapter->registrypriv;
++	HAL_DATA_TYPE	*pHalData	= GET_HAL_DATA(Adapter);
++
++	u8	txpktbuf_bndy; 
++
++	if(!pregistrypriv->wifi_spec){
++		txpktbuf_bndy = TX_PAGE_BOUNDARY;
++	}
++	else{//for WMM
++		txpktbuf_bndy = WMM_NORMAL_TX_PAGE_BOUNDARY;
++	}
++
++	rtw_write8(Adapter, REG_TXPKTBUF_BCNQ_BDNY, txpktbuf_bndy);
++	rtw_write8(Adapter, REG_TXPKTBUF_MGQ_BDNY, txpktbuf_bndy);
++	rtw_write8(Adapter, REG_TXPKTBUF_WMAC_LBK_BF_HD, txpktbuf_bndy);
++	rtw_write8(Adapter, REG_TRXFF_BNDY, txpktbuf_bndy);	
++#if 1
++	rtw_write8(Adapter, REG_TDECTRL+1, txpktbuf_bndy);
++#else
++	txdmactrl = PlatformIORead2Byte(Adapter, REG_TDECTRL);
++	txdmactrl &= ~BCN_HEAD_MASK;
++	txdmactrl |= BCN_HEAD(txpktbuf_bndy);
++	PlatformIOWrite2Byte(Adapter, REG_TDECTRL, txdmactrl);
++#endif
++}
++
++static VOID
++_InitPageBoundary(
++	IN  PADAPTER Adapter
++	)
++{
++	// RX Page Boundary
++	//srand(static_cast<unsigned int>(time(NULL)) );
++	u16 rxff_bndy = 0x27FF;//(rand() % 1) ? 0x27FF : 0x23FF;
++
++	rtw_write16(Adapter, (REG_TRXFF_BNDY + 2), rxff_bndy);
++
++	// TODO: ?? shall we set tx boundary?
++}
++
++
++static VOID
++_InitNormalChipRegPriority(
++	IN	PADAPTER	Adapter,
++	IN	u16		beQ,
++	IN	u16		bkQ,
++	IN	u16		viQ,
++	IN	u16		voQ,
++	IN	u16		mgtQ,
++	IN	u16		hiQ
++	)
++{
++	u16 value16		= (rtw_read16(Adapter, REG_TRXDMA_CTRL) & 0x7);
++
++	value16 |=	_TXDMA_BEQ_MAP(beQ) 	| _TXDMA_BKQ_MAP(bkQ) |
++				_TXDMA_VIQ_MAP(viQ) 	| _TXDMA_VOQ_MAP(voQ) |
++				_TXDMA_MGQ_MAP(mgtQ)| _TXDMA_HIQ_MAP(hiQ);
++	
++	rtw_write16(Adapter, REG_TRXDMA_CTRL, value16);
++}
++
++static VOID
++_InitNormalChipOneOutEpPriority(
++	IN	PADAPTER Adapter
++	)
++{
++	HAL_DATA_TYPE	*pHalData	= GET_HAL_DATA(Adapter);
++
++	u16	value = 0;
++	switch(pHalData->OutEpQueueSel)
++	{
++		case TX_SELE_HQ:
++			value = QUEUE_HIGH;
++			break;
++		case TX_SELE_LQ:
++			value = QUEUE_LOW;
++			break;
++		case TX_SELE_NQ:
++			value = QUEUE_NORMAL;
++			break;
++		default:
++			//RT_ASSERT(FALSE,("Shall not reach here!\n"));
++			break;
++	}
++	
++	_InitNormalChipRegPriority(Adapter,
++								value,
++								value,
++								value,
++								value,
++								value,
++								value
++								);
++
++}
++
++static VOID
++_InitNormalChipTwoOutEpPriority(
++	IN	PADAPTER Adapter
++	)
++{
++	HAL_DATA_TYPE	*pHalData	= GET_HAL_DATA(Adapter);
++	struct registry_priv *pregistrypriv = &Adapter->registrypriv;
++	u16			beQ,bkQ,viQ,voQ,mgtQ,hiQ;
++	
++
++	u16	valueHi = 0;
++	u16	valueLow = 0;
++	
++	switch(pHalData->OutEpQueueSel)
++	{
++		case (TX_SELE_HQ | TX_SELE_LQ):
++			valueHi = QUEUE_HIGH;
++			valueLow = QUEUE_LOW;
++			break;
++		case (TX_SELE_NQ | TX_SELE_LQ):
++			valueHi = QUEUE_NORMAL;
++			valueLow = QUEUE_LOW;
++			break;
++		case (TX_SELE_HQ | TX_SELE_NQ):
++			valueHi = QUEUE_HIGH;
++			valueLow = QUEUE_NORMAL;
++			break;
++		default:
++			//RT_ASSERT(FALSE,("Shall not reach here!\n"));
++			break;
++	}
++
++	if(!pregistrypriv->wifi_spec ){
++		beQ		= valueLow;
++		bkQ		= valueLow;
++		viQ		= valueHi;
++		voQ		= valueHi;
++		mgtQ	= valueHi; 
++		hiQ		= valueHi;								
++	}
++	else{//for WMM ,CONFIG_OUT_EP_WIFI_MODE
++		beQ		= valueLow;
++		bkQ		= valueHi;		
++		viQ		= valueHi;
++		voQ		= valueLow;
++		mgtQ	= valueHi;
++		hiQ		= valueHi;							
++	}
++	
++	_InitNormalChipRegPriority(Adapter,beQ,bkQ,viQ,voQ,mgtQ,hiQ);
++
++}
++
++static VOID
++_InitNormalChipThreeOutEpPriority(
++	IN	PADAPTER Adapter
++	)
++{
++	struct registry_priv *pregistrypriv = &Adapter->registrypriv;
++	u16			beQ,bkQ,viQ,voQ,mgtQ,hiQ;
++
++	if(!pregistrypriv->wifi_spec ){// typical setting
++		beQ		= QUEUE_LOW;
++		bkQ 		= QUEUE_LOW;
++		viQ 		= QUEUE_NORMAL;
++		voQ 		= QUEUE_HIGH;
++		mgtQ 	= QUEUE_HIGH;
++		hiQ 		= QUEUE_HIGH;			
++	}
++	else{// for WMM
++		beQ		= QUEUE_LOW;
++		bkQ 		= QUEUE_NORMAL;
++		viQ 		= QUEUE_NORMAL;
++		voQ 		= QUEUE_HIGH;
++		mgtQ 	= QUEUE_HIGH;
++		hiQ 		= QUEUE_HIGH;			
++	}
++	_InitNormalChipRegPriority(Adapter,beQ,bkQ,viQ,voQ,mgtQ,hiQ);
++}
++
++static VOID
++_InitNormalChipQueuePriority(
++	IN	PADAPTER Adapter
++	)
++{
++	HAL_DATA_TYPE	*pHalData	= GET_HAL_DATA(Adapter);
++
++	switch(pHalData->OutEpNumber)
++	{
++		case 1:
++			_InitNormalChipOneOutEpPriority(Adapter);
++			break;
++		case 2:
++			_InitNormalChipTwoOutEpPriority(Adapter);
++			break;
++		case 3:
++			_InitNormalChipThreeOutEpPriority(Adapter);
++			break;
++		default:
++			//RT_ASSERT(FALSE,("Shall not reach here!\n"));
++			break;
++	}
++
++
++}
++
++static VOID
++_InitQueuePriority(
++	IN  PADAPTER Adapter
++	)
++{
++	_InitNormalChipQueuePriority(Adapter);
++}
++
++static VOID
++_InitHardwareDropIncorrectBulkOut(
++	IN  PADAPTER Adapter
++	)
++{
++	u32	value32 = rtw_read32(Adapter, REG_TXDMA_OFFSET_CHK);
++	value32 |= DROP_DATA_EN;
++	rtw_write32(Adapter, REG_TXDMA_OFFSET_CHK, value32);
++}
++
++static VOID
++_InitNetworkType(
++	IN  PADAPTER Adapter
++	)
++{
++	u32	value32;
++
++	value32 = rtw_read32(Adapter, REG_CR);
++
++	// TODO: use the other function to set network type
++#if RTL8191C_FPGA_NETWORKTYPE_ADHOC
++	value32 = (value32 & ~MASK_NETTYPE) | _NETTYPE(NT_LINK_AD_HOC);
++#else
++	value32 = (value32 & ~MASK_NETTYPE) | _NETTYPE(NT_LINK_AP);
++#endif
++	rtw_write32(Adapter, REG_CR, value32);
++//	RASSERT(pIoBase->rtw_read8(REG_CR + 2) == 0x2);
++}
++
++static VOID
++_InitTransferPageSize(
++	IN  PADAPTER Adapter
++	)
++{
++	// Tx page size is always 128.
++	
++	u8	value8;
++	value8 = _PSRX(PBP_128) | _PSTX(PBP_128);
++	rtw_write8(Adapter, REG_PBP, value8);
++}
++
++static VOID
++_InitDriverInfoSize(
++	IN  PADAPTER	Adapter,
++	IN	u8		drvInfoSize
++	)
++{
++	rtw_write8(Adapter,REG_RX_DRVINFO_SZ, drvInfoSize);
++}
++
++static VOID
++_InitWMACSetting(
++	IN  PADAPTER Adapter
++	)
++{
++	//u4Byte			value32;
++	//u16			value16;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++
++	//pHalData->ReceiveConfig = AAP | APM | AM | AB | APP_ICV | ADF | AMF | APP_FCS | HTC_LOC_CTRL | APP_MIC | APP_PHYSTS;
++	//pHalData->ReceiveConfig = RCR_AAP | RCR_APM | RCR_AM | RCR_AB |RCR_CBSSID_DATA| RCR_CBSSID_BCN| RCR_APP_ICV | RCR_AMF | RCR_HTC_LOC_CTRL | RCR_APP_MIC | RCR_APP_PHYSTS;
++	// don't turn on AAP, it will allow all packets to driver
++	pHalData->ReceiveConfig = RCR_APM | RCR_AM | RCR_AB |RCR_CBSSID_DATA| RCR_CBSSID_BCN| RCR_APP_ICV | RCR_AMF | RCR_HTC_LOC_CTRL | RCR_APP_MIC | RCR_APP_PHYSTS;
++	
++#if (0 == RTL8192C_RX_PACKET_NO_INCLUDE_CRC)
++	pHalData->ReceiveConfig |= ACRC32;
++#endif
++
++	// some REG_RCR will be modified later by phy_ConfigMACWithHeaderFile()
++	rtw_write32(Adapter, REG_RCR, pHalData->ReceiveConfig);
++
++	// Accept all multicast address
++	rtw_write32(Adapter, REG_MAR, 0xFFFFFFFF);
++	rtw_write32(Adapter, REG_MAR + 4, 0xFFFFFFFF);
++
++
++	// Accept all data frames
++	//value16 = 0xFFFF;
++	//rtw_write16(Adapter, REG_RXFLTMAP2, value16);
++
++	// 2010.09.08 hpfan
++	// Since ADF is removed from RCR, ps-poll will not be indicate to driver,
++	// RxFilterMap should mask ps-poll to gurantee AP mode can rx ps-poll.
++	//value16 = 0x400;
++	//rtw_write16(Adapter, REG_RXFLTMAP1, value16);
++
++	// Accept all management frames
++	//value16 = 0xFFFF;
++	//rtw_write16(Adapter, REG_RXFLTMAP0, value16);
++
++	//enable RX_SHIFT bits
++	//rtw_write8(Adapter, REG_TRXDMA_CTRL, rtw_read8(Adapter, REG_TRXDMA_CTRL)|BIT(1));	
++
++}
++
++static VOID
++_InitAdaptiveCtrl(
++	IN  PADAPTER Adapter
++	)
++{
++	u16	value16;
++	u32	value32;
++
++	// Response Rate Set
++	value32 = rtw_read32(Adapter, REG_RRSR);
++	value32 &= ~RATE_BITMAP_ALL;
++	value32 |= RATE_RRSR_CCK_ONLY_1M;
++	rtw_write32(Adapter, REG_RRSR, value32);
++
++	// CF-END Threshold
++	//m_spIoBase->rtw_write8(REG_CFEND_TH, 0x1);
++
++	// SIFS (used in NAV)
++	value16 = _SPEC_SIFS_CCK(0x10) | _SPEC_SIFS_OFDM(0x10);
++	rtw_write16(Adapter, REG_SPEC_SIFS, value16);
++
++	// Retry Limit
++	value16 = _LRL(0x30) | _SRL(0x30);
++	rtw_write16(Adapter, REG_RL, value16);
++	
++}
++
++static VOID
++_InitRateFallback(
++	IN  PADAPTER Adapter
++	)
++{
++	// Set Data Auto Rate Fallback Retry Count register.
++	rtw_write32(Adapter, REG_DARFRC, 0x00000000);
++	rtw_write32(Adapter, REG_DARFRC+4, 0x10080404);
++	rtw_write32(Adapter, REG_RARFRC, 0x04030201);
++	rtw_write32(Adapter, REG_RARFRC+4, 0x08070605);
++
++}
++
++
++static VOID
++_InitEDCA(
++	IN  PADAPTER Adapter
++	)
++{
++	// Set Spec SIFS (used in NAV)
++	rtw_write16(Adapter,REG_SPEC_SIFS, 0x100a);
++	rtw_write16(Adapter,REG_MAC_SPEC_SIFS, 0x100a);
++
++    //REG514:SIFS_CCK_CTX
++    //REG515:SIFS_OFDM_CTX
++	//REG516:SIFS_CCK_TRX
++    //REG517:SIFS_OFDM_TRX    
++
++	// Set SIFS for CCK_CTS and OFDM_CTX
++	rtw_write16(Adapter,REG_SIFS_CTX, 0x100a);	
++
++	// Set SIFS for CCK_TRX and OFDM_TRX
++	rtw_write16(Adapter,REG_SIFS_TRX, 0x100a);
++
++	// TXOP
++	rtw_write32(Adapter, REG_EDCA_BE_PARAM, 0x005EA42B);
++	rtw_write32(Adapter, REG_EDCA_BK_PARAM, 0x0000A44F);
++	rtw_write32(Adapter, REG_EDCA_VI_PARAM, 0x005EA324);
++	rtw_write32(Adapter, REG_EDCA_VO_PARAM, 0x002FA226);
++}
++
++
++static VOID
++_InitBeaconMaxError(
++	IN  PADAPTER	Adapter,
++	IN	BOOLEAN		InfraMode
++	)
++{
++#ifdef RTL8192CU_ADHOC_WORKAROUND_SETTING
++	rtw_write8(Adapter, REG_BCN_MAX_ERR, 0xFF);	
++#else
++	//rtw_write8(Adapter, REG_BCN_MAX_ERR, (InfraMode ? 0xFF : 0x10));	
++#endif
++}
++
++
++#ifdef CONFIG_LED
++static void _InitHWLed(PADAPTER Adapter)
++{
++	struct led_priv *pledpriv = &(Adapter->ledpriv);
++	
++	if( pledpriv->LedStrategy != HW_LED)
++		return;
++	
++// HW led control
++// to do .... 
++//must consider cases of antenna diversity/ commbo card/solo card/mini card
++
++}
++#endif //CONFIG_LED
++
++static VOID
++_InitRDGSetting(
++	IN	PADAPTER Adapter
++	)
++{
++	rtw_write8(Adapter,REG_RD_CTRL,0xFF);
++	rtw_write16(Adapter, REG_RD_NAV_NXT, 0x200);
++	rtw_write8(Adapter,REG_RD_RESP_PKT_TH,0x05);
++}
++
++static VOID
++_InitRxSetting(
++	IN	PADAPTER Adapter
++	)
++{
++	rtw_write32(Adapter, REG_MACID, 0x87654321);
++	rtw_write32(Adapter, 0x0700, 0x87654321);
++}
++
++static VOID
++_InitRetryFunction(
++	IN  PADAPTER Adapter
++	)
++{
++	u8	value8;
++	
++	value8 = rtw_read8(Adapter, REG_FWHW_TXQ_CTRL);
++	value8 |= EN_AMPDU_RTY_NEW;
++	rtw_write8(Adapter, REG_FWHW_TXQ_CTRL, value8);
++
++	// Set ACK timeout
++	rtw_write8(Adapter, REG_ACKTO, 0x40);
++}
++
++/*-----------------------------------------------------------------------------
++ * Function:	usb_AggSettingTxUpdate()
++ *
++ * Overview:	Seperate TX/RX parameters update independent for TP detection and 
++ *			dynamic TX/RX aggreagtion parameters update.
++ *
++ * Input:			PADAPTER
++ *
++ * Output/Return:	NONE
++ *
++ * Revised History:
++ *	When		Who		Remark
++ *	12/10/2010	MHC		Seperate to smaller function.
++ *
++ *---------------------------------------------------------------------------*/
++static VOID
++usb_AggSettingTxUpdate(
++	IN	PADAPTER			Adapter
++	)
++{
++#ifdef CONFIG_USB_TX_AGGREGATION
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	//PMGNT_INFO		pMgntInfo = &(Adapter->MgntInfo);	
++	u32			value32;
++
++	if(Adapter->registrypriv.wifi_spec)
++		pHalData->UsbTxAggMode = _FALSE;
++
++	if(pHalData->UsbTxAggMode){
++		value32 = rtw_read32(Adapter, REG_TDECTRL);
++		value32 = value32 & ~(BLK_DESC_NUM_MASK << BLK_DESC_NUM_SHIFT);
++		value32 |= ((pHalData->UsbTxAggDescNum & BLK_DESC_NUM_MASK) << BLK_DESC_NUM_SHIFT);
++		
++		rtw_write32(Adapter, REG_TDECTRL, value32);
++	}
++	
++#endif
++}	// usb_AggSettingTxUpdate
++
++
++/*-----------------------------------------------------------------------------
++ * Function:	usb_AggSettingRxUpdate()
++ *
++ * Overview:	Seperate TX/RX parameters update independent for TP detection and 
++ *			dynamic TX/RX aggreagtion parameters update.
++ *
++ * Input:			PADAPTER
++ *
++ * Output/Return:	NONE
++ *
++ * Revised History:
++ *	When		Who		Remark
++ *	12/10/2010	MHC		Seperate to smaller function.
++ *
++ *---------------------------------------------------------------------------*/
++static VOID
++usb_AggSettingRxUpdate(
++	IN	PADAPTER			Adapter
++	)
++{
++#ifdef CONFIG_USB_RX_AGGREGATION
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	//PMGNT_INFO		pMgntInfo = &(Adapter->MgntInfo);
++	u8			valueDMA;
++	u8			valueUSB;
++
++	valueDMA = rtw_read8(Adapter, REG_TRXDMA_CTRL);
++	valueUSB = rtw_read8(Adapter, REG_USB_SPECIAL_OPTION);
++
++	switch(pHalData->UsbRxAggMode)
++	{
++		case USB_RX_AGG_DMA:
++			valueDMA |= RXDMA_AGG_EN;
++			valueUSB &= ~USB_AGG_EN;
++			break;
++		case USB_RX_AGG_USB:
++			valueDMA &= ~RXDMA_AGG_EN;
++			valueUSB |= USB_AGG_EN;
++			break;
++		case USB_RX_AGG_MIX:
++			valueDMA |= RXDMA_AGG_EN;
++			valueUSB |= USB_AGG_EN;
++			break;
++		case USB_RX_AGG_DISABLE:
++		default:
++			valueDMA &= ~RXDMA_AGG_EN;
++			valueUSB &= ~USB_AGG_EN;
++			break;
++	}
++
++	rtw_write8(Adapter, REG_TRXDMA_CTRL, valueDMA);
++	rtw_write8(Adapter, REG_USB_SPECIAL_OPTION, valueUSB);
++
++	switch(pHalData->UsbRxAggMode)
++	{
++		case USB_RX_AGG_DMA:
++			rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH, pHalData->UsbRxAggPageCount);
++			rtw_write8(Adapter, REG_USB_DMA_AGG_TO, pHalData->UsbRxAggPageTimeout);
++			break;
++		case USB_RX_AGG_USB:
++			rtw_write8(Adapter, REG_USB_AGG_TH, pHalData->UsbRxAggBlockCount);
++			rtw_write8(Adapter, REG_USB_AGG_TO, pHalData->UsbRxAggBlockTimeout);
++			break;
++		case USB_RX_AGG_MIX:
++			rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH, pHalData->UsbRxAggPageCount);
++			rtw_write8(Adapter, REG_USB_DMA_AGG_TO, pHalData->UsbRxAggPageTimeout);
++			rtw_write8(Adapter, REG_USB_AGG_TH, pHalData->UsbRxAggBlockCount);
++			rtw_write8(Adapter, REG_USB_AGG_TO, pHalData->UsbRxAggBlockTimeout);
++			break;
++		case USB_RX_AGG_DISABLE:
++		default:
++			// TODO: 
++			break;
++	}
++
++	switch(PBP_128)
++	{
++		case PBP_128:
++			pHalData->HwRxPageSize = 128;
++			break;
++		case PBP_64:
++			pHalData->HwRxPageSize = 64;
++			break;
++		case PBP_256:
++			pHalData->HwRxPageSize = 256;
++			break;
++		case PBP_512:
++			pHalData->HwRxPageSize = 512;
++			break;
++		case PBP_1024:
++			pHalData->HwRxPageSize = 1024;
++			break;
++		default:
++			//RT_ASSERT(FALSE, ("RX_PAGE_SIZE_REG_VALUE definition is incorrect!\n"));
++			break;
++	}
++#endif
++}	// usb_AggSettingRxUpdate
++
++static VOID
++InitUsbAggregationSetting(
++	IN  PADAPTER Adapter
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++
++	// Tx aggregation setting
++	usb_AggSettingTxUpdate(Adapter);
++
++	// Rx aggregation setting
++	usb_AggSettingRxUpdate(Adapter);
++
++	// 201/12/10 MH Add for USB agg mode dynamic switch.
++	pHalData->UsbRxHighSpeedMode = _FALSE;
++}
++
++/*-----------------------------------------------------------------------------
++ * Function:	USB_AggModeSwitch()
++ *
++ * Overview:	When RX traffic is more than 40M, we need to adjust some parameters to increase
++ *			RX speed by increasing batch indication size. This will decrease TCP ACK speed, we
++ *			need to monitor the influence of FTP/network share.
++ *			For TX mode, we are still ubder investigation.
++ *
++ * Input:		PADAPTER
++ *
++ * Output:		NONE
++ *
++ * Return:		NONE
++ *
++ * Revised History:
++ *	When		Who		Remark
++ *	12/10/2010	MHC		Create Version 0.  
++ *
++ *---------------------------------------------------------------------------*/
++VOID
++USB_AggModeSwitch(
++	IN	PADAPTER			Adapter
++	)
++{
++#if 0
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	struct mlme_priv	*pmlmepriv = &(Adapter->mlmepriv);
++
++	//pHalData->UsbRxHighSpeedMode = FALSE;
++	// How to measure the RX speed? We assume that when traffic is more than 
++	if (pMgntInfo->bRegAggDMEnable == _FALSE)
++	{
++		return;	// Inf not support.
++	}
++	
++	
++	if (pmlmepriv->LinkDetectInfo.bHigherBusyTraffic == _TRUE && 
++		pHalData->UsbRxHighSpeedMode == _FALSE)
++	{
++		pHalData->UsbRxHighSpeedMode = _TRUE;
++		DBG_8192C("UsbAggModeSwitchCheck to HIGH\n");
++	}
++	else if (pmlmepriv->LinkDetectInfo.bHigherBusyTraffic == _FALSE && 
++		pHalData->UsbRxHighSpeedMode == _TRUE)
++	{
++		pHalData->UsbRxHighSpeedMode = _FALSE;
++		DBG_8192C("UsbAggModeSwitchCheck to LOW\n");
++	}
++	else
++	{
++		return; 
++	}
++	
++	// 2010/12/10 MH Add for USB Aggregation judgement we need to 
++	//if( pMgntInfo->LinkDetectInfo.NumRxOkInPeriod > 4000 ||
++		//			pMgntInfo->LinkDetectInfo.NumTxOkInPeriod > 4000 )
++
++#ifdef CONFIG_USB_TX_AGGREGATION
++	//usb_AggSettingTxUpdate(Adapter);
++#endif
++		
++#ifdef CONFIG_USB_RX_AGGREGATION
++	if (pHalData->UsbRxHighSpeedMode == _TRUE)	
++	{
++		// 2010/12/10 MH The parameter is tested by SD1 engineer and SD3 channel emulator.
++		// USB mode
++		pHalData->UsbRxAggBlockCount		= 40;
++		pHalData->UsbRxAggBlockTimeout	= 5;
++		// Mix mode
++		pHalData->UsbRxAggPageCount		= 72;
++		pHalData->UsbRxAggPageTimeout	= 6;		
++	}
++	else
++	{
++		// USB mode
++		pHalData->UsbRxAggBlockCount		= pMgntInfo->RegUsbRxAggBlockCount;
++		pHalData->UsbRxAggBlockTimeout	= pMgntInfo->RegUsbRxAggBlockTimeout;	
++		// Mix mode
++		pHalData->UsbRxAggPageCount		= pMgntInfo->RegUsbRxAggPageCount;
++		pHalData->UsbRxAggPageTimeout	= pMgntInfo->RegUsbRxAggPageTimeout;	
++	}	
++#endif
++#endif
++}	// USB_AggModeSwitch
++
++static VOID
++_InitOperationMode(
++	IN	PADAPTER			Adapter
++	)
++{
++#if 0//gtest
++	PHAL_DATA_8192CUSB	pHalData = GetHalData8192CUsb(Adapter);
++	u1Byte				regBwOpMode = 0;
++	u4Byte				regRATR = 0, regRRSR = 0;
++
++
++	//1 This part need to modified according to the rate set we filtered!!
++	//
++	// Set RRSR, RATR, and REG_BWOPMODE registers
++	//
++	switch(Adapter->RegWirelessMode)
++	{
++		case WIRELESS_MODE_B:
++			regBwOpMode = BW_OPMODE_20MHZ;
++			regRATR = RATE_ALL_CCK;
++			regRRSR = RATE_ALL_CCK;
++			break;
++		case WIRELESS_MODE_A:
++			ASSERT(FALSE);
++#if 0
++			regBwOpMode = BW_OPMODE_5G |BW_OPMODE_20MHZ;
++			regRATR = RATE_ALL_OFDM_AG;
++			regRRSR = RATE_ALL_OFDM_AG;
++#endif
++			break;
++		case WIRELESS_MODE_G:
++			regBwOpMode = BW_OPMODE_20MHZ;
++			regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
++			regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
++			break;
++		case WIRELESS_MODE_AUTO:
++			if (Adapter->bInHctTest)
++			{
++			    regBwOpMode = BW_OPMODE_20MHZ;
++			    regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
++			    regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
++			}
++			else
++			{
++			    regBwOpMode = BW_OPMODE_20MHZ;
++			    regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
++			    regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
++			}
++			break;
++		case WIRELESS_MODE_N_24G:
++			// It support CCK rate by default.
++			// CCK rate will be filtered out only when associated AP does not support it.
++			regBwOpMode = BW_OPMODE_20MHZ;
++				regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
++				regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
++			break;
++		case WIRELESS_MODE_N_5G:
++			ASSERT(FALSE);
++#if 0
++			regBwOpMode = BW_OPMODE_5G;
++			regRATR = RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
++			regRRSR = RATE_ALL_OFDM_AG;
++#endif
++			break;
++	}
++
++	// Ziv ????????
++	//PlatformEFIOWrite4Byte(Adapter, REG_INIRTS_RATE_SEL, regRRSR);
++	PlatformEFIOWrite1Byte(Adapter, REG_BWOPMODE, regBwOpMode);
++
++	// For Min Spacing configuration.
++	switch(pHalData->RF_Type)
++	{
++		case RF_1T2R:
++		case RF_1T1R:
++			RT_TRACE(COMP_INIT, DBG_LOUD, ("Initializeadapter: RF_Type%s\n", (pHalData->RF_Type==RF_1T1R? "(1T1R)":"(1T2R)")));
++			Adapter->MgntInfo.MinSpaceCfg = (MAX_MSS_DENSITY_1T<<3);						
++			break;
++		case RF_2T2R:
++		case RF_2T2R_GREEN:
++			RT_TRACE(COMP_INIT, DBG_LOUD, ("Initializeadapter:RF_Type(2T2R)\n"));
++			Adapter->MgntInfo.MinSpaceCfg = (MAX_MSS_DENSITY_2T<<3);			
++			break;
++	}
++	
++	PlatformEFIOWrite1Byte(Adapter, REG_AMPDU_MIN_SPACE, Adapter->MgntInfo.MinSpaceCfg);
++#endif
++}
++
++
++ static VOID
++_InitBeaconParameters(
++	IN  PADAPTER Adapter
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++
++	rtw_write16(Adapter, REG_BCN_CTRL, 0x1010);
++
++	// TODO: Remove these magic number
++	rtw_write16(Adapter, REG_TBTT_PROHIBIT,0x6404);// ms
++
++	rtw_write8(Adapter, REG_DRVERLYINT, DRIVER_EARLY_INT_TIME);// 5ms
++	rtw_write8(Adapter, REG_BCNDMATIM, BCN_DMA_ATIME_INT_TIME); // 2ms
++
++	// Suggested by designer timchen. Change beacon AIFS to the largest number
++	// beacause test chip does not contension before sending beacon. by tynli. 2009.11.03
++	rtw_write16(Adapter, REG_BCNTCFG, 0x660F);
++}
++
++static VOID
++_InitRFType(
++	IN	PADAPTER Adapter
++	)
++{
++	struct registry_priv	 *pregpriv = &Adapter->registrypriv;
++	HAL_DATA_TYPE	*pHalData	= GET_HAL_DATA(Adapter);
++	BOOLEAN			is92CU		= IS_92C_SERIAL(pHalData->VersionID);
++
++#if	DISABLE_BB_RF
++	pHalData->rf_chip	= RF_PSEUDO_11N;
++	return;
++#endif
++
++	pHalData->rf_chip	= RF_6052;
++
++	if(_FALSE == is92CU){
++		pHalData->rf_type = RF_1T1R;
++		DBG_8192C("Set RF Chip ID to RF_6052 and RF type to 1T1R.\n");
++		return;
++	}
++
++	// TODO: Consider that EEPROM set 92CU to 1T1R later.
++	// Force to overwrite setting according to chip version. Ignore EEPROM setting.
++	//pHalData->RF_Type = is92CU ? RF_2T2R : RF_1T1R;
++	MSG_8192C("Set RF Chip ID to RF_6052 and RF type to %d.\n", pHalData->rf_type);
++
++}
++
++static VOID _InitAdhocWorkaroundParams(IN PADAPTER Adapter)
++{
++#if RTL8192CU_ADHOC_WORKAROUND_SETTING
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);	
++	pHalData->RegBcnCtrlVal = rtw_read8(Adapter, REG_BCN_CTRL);
++	pHalData->RegTxPause = rtw_read8(Adapter, REG_TXPAUSE); 
++	pHalData->RegFwHwTxQCtrl = rtw_read8(Adapter, REG_FWHW_TXQ_CTRL+2);
++	pHalData->RegReg542 = rtw_read8(Adapter, REG_TBTT_PROHIBIT+2);
++#endif	
++}
++
++static VOID
++_BeaconFunctionEnable(
++	IN	PADAPTER		Adapter,
++	IN	BOOLEAN			Enable,
++	IN	BOOLEAN			Linked
++	)
++{
++	rtw_write8(Adapter, REG_BCN_CTRL, (BIT4 | BIT3 | BIT1));
++	//SetBcnCtrlReg(Adapter, (BIT4 | BIT3 | BIT1), 0x00);
++	//RT_TRACE(COMP_BEACON, DBG_LOUD, ("_BeaconFunctionEnable 0x550 0x%x\n", PlatformEFIORead1Byte(Adapter, 0x550)));			
++
++	rtw_write8(Adapter, REG_RD_CTRL+1, 0x6F);	
++}
++
++
++// Set CCK and OFDM Block "ON"
++static VOID _BBTurnOnBlock(
++	IN	PADAPTER		Adapter
++	)
++{
++#if (DISABLE_BB_RF)
++	return;
++#endif
++
++	PHY_SetBBReg(Adapter, rFPGA0_RFMOD, bCCKEn, 0x1);
++	PHY_SetBBReg(Adapter, rFPGA0_RFMOD, bOFDMEn, 0x1);
++}
++
++static VOID _RfPowerSave(
++	IN	PADAPTER		Adapter
++	)
++{
++#if 0
++	HAL_DATA_TYPE	*pHalData	= GET_HAL_DATA(Adapter);
++	PMGNT_INFO		pMgntInfo	= &(Adapter->MgntInfo);
++	u1Byte			eRFPath;
++
++#if (DISABLE_BB_RF)
++	return;
++#endif
++
++	if(pMgntInfo->RegRfOff == TRUE){ // User disable RF via registry.
++		RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter8192CUsb(): Turn off RF for RegRfOff.\n"));
++		MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
++		// Those action will be discard in MgntActSet_RF_State because off the same state
++		for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
++			PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
++	}
++	else if(pMgntInfo->RfOffReason > RF_CHANGE_BY_PS){ // H/W or S/W RF OFF before sleep.
++		RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter8192CUsb(): Turn off RF for RfOffReason(%ld).\n", pMgntInfo->RfOffReason));
++		MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
++	}
++	else{
++		pHalData->eRFPowerState = eRfOn;
++		pMgntInfo->RfOffReason = 0; 
++		if(Adapter->bInSetPower || Adapter->bResetInProgress)
++			PlatformUsbEnableInPipes(Adapter);
++		RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter8192CUsb(): RF is on.\n"));
++	}
++#endif
++}
++
++enum {
++	Antenna_Lfet = 1,
++	Antenna_Right = 2,	
++};
++
++static VOID
++_InitAntenna_Selection(IN	PADAPTER Adapter)
++{
++
++	HAL_DATA_TYPE	*pHalData	= GET_HAL_DATA(Adapter);
++
++	if(pHalData->AntDivCfg==0)
++		return;
++	DBG_8192C("==>  %s ....\n",__FUNCTION__);
++	
++	if((RF_1T1R == pHalData->rf_type))
++	{	
++		rtw_write32(Adapter, REG_LEDCFG0, rtw_read32(Adapter, REG_LEDCFG0)|BIT23);	
++		PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter, BIT13, 0x01);
++		
++		if(PHY_QueryBBReg(Adapter, rFPGA0_XA_RFInterfaceOE, 0x300) == Antenna_A)
++			pHalData->CurAntenna = Antenna_A;
++		else
++			pHalData->CurAntenna = Antenna_B;
++		DBG_8192C("%s,Cur_ant:(%x)%s\n",__FUNCTION__,pHalData->CurAntenna,(pHalData->CurAntenna == Antenna_A)?"Antenna_A":"Antenna_B");
++			
++}
++
++
++}
++//
++// 2010/08/09 MH Add for power down check.
++//
++static BOOLEAN
++HalDetectPwrDownMode(
++	IN PADAPTER				Adapter
++	)
++{
++	u8	tmpvalue;
++	HAL_DATA_TYPE		*pHalData	= GET_HAL_DATA(Adapter);
++	struct pwrctrl_priv		*pwrctrlpriv = &Adapter->pwrctrlpriv;
++	
++	EFUSE_ShadowRead(Adapter, 1, EEPROM_RF_OPT3, (u32 *)&tmpvalue);
++
++	// 2010/08/25 MH INF priority > PDN Efuse value.
++	if(tmpvalue & BIT4 && pwrctrlpriv->reg_pdnmode)
++	{
++		pHalData->pwrdown = _TRUE;
++	}
++	else
++	{
++		pHalData->pwrdown = _FALSE;
++	}
++
++	DBG_8192C("HalDetectPwrDownMode(): PDN=%d\n", pHalData->pwrdown);
++	return pHalData->pwrdown;
++		
++}	// HalDetectPwrDownMode
++
++
++//
++// 2010/08/26 MH Add for selective suspend mode check.
++// If Efuse 0x0e bit1 is not enabled, we can not support selective suspend for Minicard and
++// slim card.
++//
++static VOID
++HalDetectSelectiveSuspendMode(
++	IN PADAPTER				Adapter
++	)
++{
++	u8	tmpvalue;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	struct dvobj_priv	*pdvobjpriv = adapter_to_dvobj(Adapter);
++
++	// If support HW radio detect, we need to enable WOL ability, otherwise, we 
++	// can not use FW to notify host the power state switch.
++	
++	EFUSE_ShadowRead(Adapter, 1, EEPROM_USB_OPTIONAL1, (u32 *)&tmpvalue);
++
++	DBG_8192C("HalDetectSelectiveSuspendMode(): SS ");
++	if(tmpvalue & BIT1)
++	{
++		DBG_8192C("Enable\n");
++	}
++	else
++	{
++		DBG_8192C("Disable\n");
++		pdvobjpriv->RegUsbSS = _FALSE;
++	}
++
++	// 2010/09/01 MH According to Dongle Selective Suspend INF. We can switch SS mode.
++	if (pdvobjpriv->RegUsbSS && !SUPPORT_HW_RADIO_DETECT(pHalData))
++	{
++		//PMGNT_INFO				pMgntInfo = &(Adapter->MgntInfo);
++
++		//if (!pMgntInfo->bRegDongleSS)	
++		//{
++		//	RT_TRACE(COMP_INIT, DBG_LOUD, ("Dongle disable SS\n"));
++			pdvobjpriv->RegUsbSS = _FALSE;
++		//}
++	}
++}	// HalDetectSelectiveSuspendMode
++/*-----------------------------------------------------------------------------
++ * Function:	HwSuspendModeEnable92Cu()
++ *
++ * Overview:	HW suspend mode switch.
++ *
++ * Input:		NONE
++ *
++ * Output:	NONE
++ *
++ * Return:	NONE
++ *
++ * Revised History:
++ *	When		Who		Remark
++ *	08/23/2010	MHC		HW suspend mode switch test..
++ *---------------------------------------------------------------------------*/
++static VOID 
++HwSuspendModeEnable92Cu(
++	IN	PADAPTER	pAdapter,
++	IN	u8			Type
++	)
++{
++	//PRT_USB_DEVICE 		pDevice = GET_RT_USB_DEVICE(pAdapter);
++	u16	reg = rtw_read16(pAdapter, REG_GPIO_MUXCFG);	
++
++	//if (!pDevice->RegUsbSS)
++	{
++		return;
++	}
++
++	//
++	// 2010/08/23 MH According to Alfred's suggestion, we need to to prevent HW
++	// to enter suspend mode automatically. Otherwise, it will shut down major power 
++	// domain and 8051 will stop. When we try to enter selective suspend mode, we
++	// need to prevent HW to enter D2 mode aumotmatically. Another way, Host will
++	// issue a S10 signal to power domain. Then it will cleat SIC setting(from Yngli).
++	// We need to enable HW suspend mode when enter S3/S4 or disable. We need 
++	// to disable HW suspend mode for IPS/radio_off.
++	//
++	//RT_TRACE(COMP_RF, DBG_LOUD, ("HwSuspendModeEnable92Cu = %d\n", Type));
++	if (Type == _FALSE)
++	{
++		reg |= BIT14;
++		//RT_TRACE(COMP_RF, DBG_LOUD, ("REG_GPIO_MUXCFG = %x\n", reg));
++		rtw_write16(pAdapter, REG_GPIO_MUXCFG, reg);
++		reg |= BIT12;
++		//RT_TRACE(COMP_RF, DBG_LOUD, ("REG_GPIO_MUXCFG = %x\n", reg));
++		rtw_write16(pAdapter, REG_GPIO_MUXCFG, reg);
++	}
++	else
++	{
++		reg &= (~BIT12);
++		rtw_write16(pAdapter, REG_GPIO_MUXCFG, reg);
++		reg &= (~BIT14);
++		rtw_write16(pAdapter, REG_GPIO_MUXCFG, reg);
++	}
++	
++}	// HwSuspendModeEnable92Cu
++rt_rf_power_state RfOnOffDetect(IN	PADAPTER pAdapter )
++{
++	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(pAdapter);
++	u8	val8;
++	rt_rf_power_state rfpowerstate = rf_off;
++
++	if(pAdapter->pwrctrlpriv.bHWPowerdown)
++	{
++		val8 = rtw_read8(pAdapter, REG_HSISR);
++		DBG_8192C("pwrdown, 0x5c(BIT7)=%02x\n", val8);
++		rfpowerstate = (val8 & BIT7) ? rf_off: rf_on;				
++	}
++	else // rf on/off
++	{
++		rtw_write8(	pAdapter, REG_MAC_PINMUX_CFG,rtw_read8(pAdapter, REG_MAC_PINMUX_CFG)&~(BIT3));
++		val8 = rtw_read8(pAdapter, REG_GPIO_IO_SEL);
++		DBG_8192C("GPIO_IN=%02x\n", val8);
++		rfpowerstate = (val8 & BIT3) ? rf_on : rf_off;	
++	}
++	return rfpowerstate;
++}	// HalDetectPwrDownMode
++
++void _ps_open_RF(_adapter *padapter);
++
++
++u32 rtl8192cu_hal_init(PADAPTER Adapter)
++{
++	u8	val8 = 0;
++	u32	boundary, status = _SUCCESS;
++	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(Adapter);
++	struct pwrctrl_priv		*pwrctrlpriv = &Adapter->pwrctrlpriv;
++	struct registry_priv	*pregistrypriv = &Adapter->registrypriv;
++	u8	is92C = IS_92C_SERIAL(pHalData->VersionID);
++	rt_rf_power_state		eRfPowerStateToSet;
++#ifdef CONFIG_BT_COEXIST
++	struct btcoexist_priv	*pbtpriv = &(pHalData->bt_coexist);
++#endif
++
++	u32 init_start_time = rtw_get_current_time();
++
++
++#ifdef DBG_HAL_INIT_PROFILING
++
++	enum HAL_INIT_STAGES {
++		HAL_INIT_STAGES_BEGIN = 0,
++		HAL_INIT_STAGES_INIT_PW_ON,
++		HAL_INIT_STAGES_MISC01,
++		HAL_INIT_STAGES_DOWNLOAD_FW,
++		HAL_INIT_STAGES_INIT_LLTT,
++		HAL_INIT_STAGES_MAC,
++		HAL_INIT_STAGES_MISC02,
++		HAL_INIT_STAGES_BB,
++		HAL_INIT_STAGES_RF,
++		HAL_INIT_STAGES_TURN_ON_BLOCK,
++		HAL_INIT_STAGES_INIT_SECURITY,
++		HAL_INIT_STAGES_MISC11,
++		//HAL_INIT_STAGES_RF_PS,
++		HAL_INIT_STAGES_IQK,
++		HAL_INIT_STAGES_PW_TRACK,
++		HAL_INIT_STAGES_LCK,
++		HAL_INIT_STAGES_MISC21,
++		HAL_INIT_STAGES_INIT_PABIAS,
++		HAL_INIT_STAGES_BT_COEXIST,
++		//HAL_INIT_STAGES_ANTENNA_SEL,
++		HAL_INIT_STAGES_INIT_HAL_DM,
++		HAL_INIT_STAGES_MISC31,
++		HAL_INIT_STAGES_END,
++		HAL_INIT_STAGES_NUM
++	};
++
++	char * hal_init_stages_str[] = {
++		"HAL_INIT_STAGES_BEGIN",
++		"HAL_INIT_STAGES_INIT_PW_ON",
++		"HAL_INIT_STAGES_MISC01",
++		"HAL_INIT_STAGES_DOWNLOAD_FW",
++		"HAL_INIT_STAGES_INIT_LLTT",
++		"HAL_INIT_STAGES_MAC",
++		"HAL_INIT_STAGES_MISC02",
++		"HAL_INIT_STAGES_BB",
++		"HAL_INIT_STAGES_RF",
++		"HAL_INIT_STAGES_TURN_ON_BLOCK",
++		"HAL_INIT_STAGES_INIT_SECURITY",
++		"HAL_INIT_STAGES_MISC11",
++		//"HAL_INIT_STAGES_RF_PS",
++		"HAL_INIT_STAGES_IQK",
++		"HAL_INIT_STAGES_PW_TRACK",
++		"HAL_INIT_STAGES_LCK",
++		"HAL_INIT_STAGES_MISC21",
++		"HAL_INIT_STAGES_INIT_PABIAS",
++		"HAL_INIT_STAGES_BT_COEXIST",
++		//"HAL_INIT_STAGES_ANTENNA_SEL",
++		"HAL_INIT_STAGES_INIT_HAL_DM",
++		"HAL_INIT_STAGES_MISC31",
++		"HAL_INIT_STAGES_END",
++	};
++
++	int hal_init_profiling_i;
++	u32 hal_init_stages_timestamp[HAL_INIT_STAGES_NUM]; //used to record the time of each stage's starting point
++
++	for(hal_init_profiling_i=0;hal_init_profiling_i<HAL_INIT_STAGES_NUM;hal_init_profiling_i++)
++		hal_init_stages_timestamp[hal_init_profiling_i]=0;
++
++	#define HAL_INIT_PROFILE_TAG(stage) hal_init_stages_timestamp[(stage)]=rtw_get_current_time();
++#else
++	#define HAL_INIT_PROFILE_TAG(stage) do {} while(0)
++#endif //DBG_HAL_INIT_PROFILING
++
++
++
++_func_enter_;
++
++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BEGIN);
++	if(Adapter->pwrctrlpriv.bkeepfwalive)
++	{
++		_ps_open_RF(Adapter);
++
++		if(pHalData->bIQKInitialized ){
++			rtl8192c_PHY_IQCalibrate(Adapter,_TRUE);
++		}
++		else{
++			rtl8192c_PHY_IQCalibrate(Adapter,_FALSE);
++			pHalData->bIQKInitialized = _TRUE;
++		}
++		rtl8192c_dm_CheckTXPowerTracking(Adapter);
++		rtl8192c_PHY_LCCalibrate(Adapter);
++
++		goto exit;
++	}
++
++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PW_ON);
++	status = _InitPowerOn(Adapter);
++	if(status == _FAIL){
++		RT_TRACE(_module_hci_hal_init_c_, _drv_err_, ("Failed to init power on!\n"));
++		goto exit;
++	}
++
++
++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC01);
++	_InitQueueReservedPage(Adapter);
++	_InitTxBufferBoundary(Adapter);		
++	_InitQueuePriority(Adapter);
++	_InitPageBoundary(Adapter);	
++	_InitTransferPageSize(Adapter);
++
++
++#if ENABLE_USB_DROP_INCORRECT_OUT
++	_InitHardwareDropIncorrectBulkOut(Adapter);
++#endif
++
++	if(pHalData->bRDGEnable){
++		_InitRDGSetting(Adapter);
++	}
++
++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_DOWNLOAD_FW);
++#if (1 == MP_DRIVER)
++	_InitRxSetting(Adapter);
++	// Don't Download Firmware
++	Adapter->bFWReady = _FALSE;
++#elif RTL8192CU_FW_DOWNLOAD_ENABLE
++	status = FirmwareDownload92C(Adapter,_FALSE);
++	if(status != _SUCCESS)
++	{
++		Adapter->bFWReady = _FALSE;
++		pHalData->fw_ractrl = _FALSE;
++		DBG_8192C("fw download fail!\n");
++		goto exit;
++	}	
++	else
++	{
++		Adapter->bFWReady = _TRUE;
++		pHalData->fw_ractrl = _TRUE;
++		DBG_8192C("fw download ok!\n");	
++	}
++#endif
++
++	InitializeFirmwareVars92C(Adapter);
++
++	if(pwrctrlpriv->reg_rfoff == _TRUE){
++		pwrctrlpriv->rf_pwrstate = rf_off;
++	}
++
++	// 2010/08/09 MH We need to check if we need to turnon or off RF after detecting
++	// HW GPIO pin. Before PHY_RFConfig8192C.
++	//HalDetectPwrDownMode(Adapter);
++	// 2010/08/26 MH If Efuse does not support sective suspend then disable the function.
++	//HalDetectSelectiveSuspendMode(Adapter);
++
++	// Set RF type for BB/RF configuration	
++	_InitRFType(Adapter);//->_ReadRFType()
++
++	// Save target channel
++	// <Roger_Notes> Current Channel will be updated again later.
++	pHalData->CurrentChannel = 6;//default set to 6
++
++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_LLTT);
++	if(!pregistrypriv->wifi_spec){
++		boundary = TX_PAGE_BOUNDARY;
++	}
++	else{// for WMM
++		boundary = WMM_NORMAL_TX_PAGE_BOUNDARY;
++	}															
++	status =  InitLLTTable(Adapter, boundary);
++	if(status == _FAIL){
++		RT_TRACE(_module_hci_hal_init_c_, _drv_err_, ("Failed to init LLT table\n"));
++		goto exit;
++	}
++
++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MAC);
++#if (HAL_MAC_ENABLE == 1)
++	status = PHY_MACConfig8192C(Adapter);
++	if(status == _FAIL)
++	{
++		goto exit;
++	}
++#endif
++
++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC02);
++	// Get Rx PHY status in order to report RSSI and others.
++	_InitDriverInfoSize(Adapter, DRVINFO_SZ);
++
++	_InitInterrupt(Adapter);
++	hal_init_macaddr(Adapter);//set mac_address
++	_InitNetworkType(Adapter);//set msr	
++	_InitWMACSetting(Adapter);
++	_InitAdaptiveCtrl(Adapter);
++	_InitEDCA(Adapter);
++	_InitRateFallback(Adapter);
++	_InitRetryFunction(Adapter);
++	InitUsbAggregationSetting(Adapter);
++	_InitOperationMode(Adapter);//todo
++	_InitBeaconParameters(Adapter);
++	_InitBeaconMaxError(Adapter, _TRUE);
++
++#if defined(CONFIG_CONCURRENT_MODE) || defined(CONFIG_TX_MCAST2UNI)
++
++#ifdef CONFIG_CHECK_AC_LIFETIME
++	// Enable lifetime check for the four ACs
++	rtw_write8(Adapter, REG_LIFETIME_EN, 0x0F);
++#endif	// CONFIG_CHECK_AC_LIFETIME
++
++#ifdef CONFIG_TX_MCAST2UNI
++	rtw_write16(Adapter, REG_PKT_VO_VI_LIFE_TIME, 0x0400);	// unit: 256us. 256ms
++	rtw_write16(Adapter, REG_PKT_BE_BK_LIFE_TIME, 0x0400);	// unit: 256us. 256ms
++#else	// CONFIG_TX_MCAST2UNI
++	rtw_write16(Adapter, REG_PKT_VO_VI_LIFE_TIME, 0x3000);	// unit: 256us. 3s
++	rtw_write16(Adapter, REG_PKT_BE_BK_LIFE_TIME, 0x3000);	// unit: 256us. 3s
++#endif	// CONFIG_TX_MCAST2UNI
++#endif	// CONFIG_CONCURRENT_MODE || CONFIG_TX_MCAST2UNI
++	
++
++#ifdef CONFIG_LED
++	_InitHWLed(Adapter);
++#endif //CONFIG_LED
++
++	//
++	//d. Initialize BB related configurations.
++	//
++
++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BB);
++#if (HAL_BB_ENABLE == 1)
++	status = PHY_BBConfig8192C(Adapter);
++	if(status == _FAIL)
++	{
++		goto exit;
++	}
++#endif
++
++	// 92CU use 3-wire to r/w RF
++	//pHalData->Rf_Mode = RF_OP_By_SW_3wire;
++
++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_RF);
++#if (HAL_RF_ENABLE == 1)
++	status = PHY_RFConfig8192C(Adapter);	
++	if(status == _FAIL)
++	{
++		goto exit;
++	}
++
++	if(IS_VENDOR_UMC_A_CUT(pHalData->VersionID) && !IS_92C_SERIAL(pHalData->VersionID))
++	{
++		PHY_SetRFReg(Adapter, RF_PATH_A, RF_RX_G1, bMaskDWord, 0x30255);
++		PHY_SetRFReg(Adapter, RF_PATH_A, RF_RX_G2, bMaskDWord, 0x50a00);		
++	}
++#endif
++
++	//
++	// Joseph Note: Keep RfRegChnlVal for later use.
++	//
++	pHalData->RfRegChnlVal[0] = PHY_QueryRFReg(Adapter, (RF_RADIO_PATH_E)0, RF_CHNLBW, bRFRegOffsetMask);
++	pHalData->RfRegChnlVal[1] = PHY_QueryRFReg(Adapter, (RF_RADIO_PATH_E)1, RF_CHNLBW, bRFRegOffsetMask);
++
++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_TURN_ON_BLOCK);
++	_BBTurnOnBlock(Adapter);
++	//NicIFSetMacAddress(padapter, padapter->PermanentAddress);
++
++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_SECURITY);
++	invalidate_cam_all(Adapter);
++
++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC11);
++	// 2010/12/17 MH We need to set TX power according to EFUSE content at first.
++	PHY_SetTxPowerLevel8192C(Adapter, pHalData->CurrentChannel);
++
++// Move by Neo for USB SS to below setp	
++//_RfPowerSave(Adapter);
++
++	if (!IS_92C_SERIAL( pHalData->VersionID) && (pHalData->AntDivCfg!=0))
++	{ //for 88CU ,1T1R
++		_InitAntenna_Selection(Adapter);
++	}
++
++
++	// 
++	// Disable BAR, suggested by Scott
++	// 2010.04.09 add by hpfan
++	//
++	rtw_write32(Adapter, REG_BAR_MODE_CTRL, 0x0201ffff);
++
++	// HW SEQ CTRL
++	//set 0x0 to 0xFF by tynli. Default enable HW SEQ NUM.
++	rtw_write8(Adapter,REG_HWSEQ_CTRL, 0xFF); 
++
++	if(pregistrypriv->wifi_spec)
++		rtw_write16(Adapter,REG_FAST_EDCA_CTRL ,0);
++
++	//Nav limit , suggest by scott
++	rtw_write8(Adapter, 0x652, 0x0);
++
++#if (MP_DRIVER == 1)
++	Adapter->mppriv.channel = pHalData->CurrentChannel;
++	MPT_InitializeAdapter(Adapter, Adapter->mppriv.channel);
++#else
++	//
++	// 2010/08/11 MH Merge from 8192SE for Minicard init. We need to confirm current radio status
++	// and then decide to enable RF or not.!!!??? For Selective suspend mode. We may not 
++	// call init_adapter. May cause some problem??
++	//
++	// Fix the bug that Hw/Sw radio off before S3/S4, the RF off action will not be executed 
++	// in MgntActSet_RF_State() after wake up, because the value of pHalData->eRFPowerState 
++	// is the same as eRfOff, we should change it to eRfOn after we config RF parameters.
++	// Added by tynli. 2010.03.30.
++	pwrctrlpriv->rf_pwrstate = rf_on;
++
++#if 0  //to do
++	RT_CLEAR_PS_LEVEL(pwrctrlpriv, RT_RF_OFF_LEVL_HALT_NIC);
++#if 1 //Todo
++	// 20100326 Joseph: Copy from GPIOChangeRFWorkItemCallBack() function to check HW radio on/off.
++	// 20100329 Joseph: Revise and integrate the HW/SW radio off code in initialization.
++
++	eRfPowerStateToSet = (rt_rf_power_state) RfOnOffDetect(Adapter);
++	pwrctrlpriv->rfoff_reason |= eRfPowerStateToSet==rf_on ? RF_CHANGE_BY_INIT : RF_CHANGE_BY_HW;
++	pwrctrlpriv->rfoff_reason |= (pwrctrlpriv->reg_rfoff) ? RF_CHANGE_BY_SW : 0;
++
++	if(pwrctrlpriv->rfoff_reason&RF_CHANGE_BY_HW)
++		pwrctrlpriv->b_hw_radio_off = _TRUE;
++
++	DBG_8192C("eRfPowerStateToSet=%d\n", eRfPowerStateToSet);
++	
++	if(pwrctrlpriv->reg_rfoff == _TRUE)
++	{	// User disable RF via registry.
++		DBG_8192C("InitializeAdapter8192CU(): Turn off RF for RegRfOff.\n");
++		//MgntActSet_RF_State(Adapter, rf_off, RF_CHANGE_BY_SW, _TRUE);
++		
++		// Those action will be discard in MgntActSet_RF_State because off the same state
++		//for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
++			//PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
++	}
++	else if(pwrctrlpriv->rfoff_reason > RF_CHANGE_BY_PS)
++	{	// H/W or S/W RF OFF before sleep.
++		DBG_8192C(" Turn off RF for RfOffReason(%x) ----------\n", pwrctrlpriv->rfoff_reason);
++		//pwrctrlpriv->rfoff_reason = RF_CHANGE_BY_INIT;
++		pwrctrlpriv->rf_pwrstate = rf_on;
++		//MgntActSet_RF_State(Adapter, rf_off, pwrctrlpriv->rfoff_reason, _TRUE);
++	}
++	else
++	{
++		// Perform GPIO polling to find out current RF state. added by Roger, 2010.04.09.
++		if(pHalData->BoardType == BOARD_MINICARD /*&& (Adapter->MgntInfo.PowerSaveControl.bGpioRfSw)*/)
++		{
++			DBG_8192C("InitializeAdapter8192CU(): RF=%d \n", eRfPowerStateToSet);
++			if (eRfPowerStateToSet == rf_off)
++			{				
++				//MgntActSet_RF_State(Adapter, rf_off, RF_CHANGE_BY_HW, _TRUE);
++				pwrctrlpriv->b_hw_radio_off = _TRUE;	
++			}
++			else
++			{
++				pwrctrlpriv->rf_pwrstate = rf_off;
++				pwrctrlpriv->rfoff_reason = RF_CHANGE_BY_INIT; 
++				pwrctrlpriv->b_hw_radio_off = _FALSE;					
++				//MgntActSet_RF_State(Adapter, rf_on, pwrctrlpriv->rfoff_reason, _TRUE);
++			}
++		}	
++		else
++		{
++			pwrctrlpriv->rf_pwrstate = rf_off;
++			pwrctrlpriv->rfoff_reason = RF_CHANGE_BY_INIT; 			
++			//MgntActSet_RF_State(Adapter, rf_on, pwrctrlpriv->rfoff_reason, _TRUE);
++		}
++	
++		pwrctrlpriv->rfoff_reason = 0; 
++		pwrctrlpriv->b_hw_radio_off = _FALSE;
++		pwrctrlpriv->rf_pwrstate = rf_on;
++		rtw_led_control(Adapter, LED_CTL_POWER_ON);
++
++	}
++
++	// 2010/-8/09 MH For power down module, we need to enable register block contrl reg at 0x1c.
++	// Then enable power down control bit of register 0x04 BIT4 and BIT15 as 1.
++	if(pHalData->pwrdown && eRfPowerStateToSet == rf_off)
++	{
++		// Enable register area 0x0-0xc.
++		rtw_write8(Adapter, REG_RSV_CTRL, 0x0);
++
++		//
++		// <Roger_Notes> We should configure HW PDn source for WiFi ONLY, and then
++		// our HW will be set in power-down mode if PDn source from all  functions are configured.
++		// 2010.10.06.
++		//
++		//if(IS_HARDWARE_TYPE_8723AU(Adapter))
++		//{			
++		//	u1bTmp = rtw_read8(Adapter, REG_MULTI_FUNC_CTRL);
++		//	rtw_write8(Adapter, REG_MULTI_FUNC_CTRL, (u1bTmp|WL_HWPDN_EN));
++		//}
++		//else
++		//{
++			rtw_write16(Adapter, REG_APS_FSMCO, 0x8812);
++		//}
++	}
++	//DrvIFIndicateCurrentPhyStatus(Adapter); // 2010/08/17 MH Disable to prevent BSOD.
++#endif
++#endif
++
++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_IQK);
++	// 2010/08/26 MH Merge from 8192CE.
++	if(pwrctrlpriv->rf_pwrstate == rf_on)
++	{
++		if(pHalData->bIQKInitialized ){
++			rtl8192c_PHY_IQCalibrate(Adapter,_TRUE);
++		}
++		else
++		{
++			rtl8192c_PHY_IQCalibrate(Adapter,_FALSE);
++			pHalData->bIQKInitialized = _TRUE;
++		}
++		
++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_PW_TRACK);
++		rtl8192c_dm_CheckTXPowerTracking(Adapter);
++
++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_LCK);
++		rtl8192c_PHY_LCCalibrate(Adapter);
++	}
++#endif /* #if (MP_DRIVER == 1) */
++
++
++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC21);
++#if RTL8192CU_ADHOC_WORKAROUND_SETTING
++	_InitAdhocWorkaroundParams(Adapter);
++#endif
++
++
++#ifdef USB_INTERFERENCE_ISSUE
++ //fixed USB interface interference issue
++	rtw_write8(Adapter, 0xfe40, 0xe0);
++	rtw_write8(Adapter, 0xfe41, 0x8d);
++	rtw_write8(Adapter, 0xfe42, 0x80);
++	rtw_write32(Adapter,0x20c,0xfd0320);
++#if 1
++	//2011/01/07 ,suggest by Johnny,for solved the problem that too many protocol error on USB bus
++	if(!IS_VENDOR_UMC_A_CUT(pHalData->VersionID) )//&& !IS_92C_SERIAL(pHalData->VersionID))// TSMC , 8188
++	{		
++	    	// 0xE6=0x94
++	    	rtw_write8(Adapter, 0xFE40, 0xE6);
++		rtw_write8(Adapter, 0xFE41, 0x94);
++		rtw_write8(Adapter, 0xFE42, 0x80); 
++
++		// 0xE0=0x19
++		rtw_write8(Adapter, 0xFE40, 0xE0);
++		rtw_write8(Adapter, 0xFE41, 0x19);
++		rtw_write8(Adapter, 0xFE42, 0x80);
++
++		// 0xE5=0x91
++		rtw_write8(Adapter, 0xFE40, 0xE5);
++		rtw_write8(Adapter, 0xFE41, 0x91);
++		rtw_write8(Adapter, 0xFE42, 0x80); 
++
++		// 0xE2=0x81
++		rtw_write8(Adapter, 0xFE40, 0xE2);
++		rtw_write8(Adapter, 0xFE41, 0x81);
++		rtw_write8(Adapter, 0xFE42, 0x80);    
++	
++	}
++
++#endif
++#endif //USB_INTERFERENCE_ISSUE
++
++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PABIAS);
++	_InitPABias(Adapter);
++
++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BT_COEXIST);
++#ifdef CONFIG_BT_COEXIST
++	_InitBTCoexist(Adapter);
++#endif
++
++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_HAL_DM);
++	rtl8192c_InitHalDm(Adapter);
++
++	// 2010/08/23 MH According to Alfred's suggestion, we need to to prevent HW enter
++	// suspend mode automatically.
++	//HwSuspendModeEnable92Cu(Adapter, _FALSE);
++
++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC31);
++	rtw_write8(Adapter, 0x15, 0xe9);//suggest by Johnny for lower temperature
++        
++        rtw_write8(Adapter, 0xc87, 0x50);//suggest by Jackson for CCA  
++
++	//_dbg_dump_macreg(padapter);
++
++	rtw_write16(Adapter, REG_BCN_CTRL, 0x1818);	// For 2 PORT TSF SYNC
++
++
++
++#ifdef CONFIG_XMIT_ACK
++	//ack for xmit mgmt frames.
++	rtw_write32(Adapter, REG_FWHW_TXQ_CTRL, rtw_read32(Adapter, REG_FWHW_TXQ_CTRL)|BIT(12));
++#endif //CONFIG_XMIT_ACK
++
++exit:
++HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_END);
++
++	DBG_871X("%s in %dms\n", __FUNCTION__, rtw_get_passing_time_ms(init_start_time));
++
++	#ifdef DBG_HAL_INIT_PROFILING
++	hal_init_stages_timestamp[HAL_INIT_STAGES_END]=rtw_get_current_time();
++
++	for(hal_init_profiling_i=0;hal_init_profiling_i<HAL_INIT_STAGES_NUM-1;hal_init_profiling_i++) {
++		DBG_871X("DBG_HAL_INIT_PROFILING: %35s, %u, %5u, %5u\n"
++			, hal_init_stages_str[hal_init_profiling_i]
++			, hal_init_stages_timestamp[hal_init_profiling_i]
++			, (hal_init_stages_timestamp[hal_init_profiling_i+1]-hal_init_stages_timestamp[hal_init_profiling_i])
++			, rtw_get_time_interval_ms(hal_init_stages_timestamp[hal_init_profiling_i], hal_init_stages_timestamp[hal_init_profiling_i+1])
++		);
++	}	
++	#endif
++
++
++_func_exit_;
++
++	return status;
++}
++
++
++#define SYNC_SD7_20110802_phy_SsPwrSwitch92CU
++#ifdef SYNC_SD7_20110802_phy_SsPwrSwitch92CU
++
++VOID
++phy_SsPwrSwitch92CU(
++	IN	PADAPTER			Adapter,
++	IN	rt_rf_power_state	eRFPowerState,
++	IN	int bRegSSPwrLvl
++	)
++{
++	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(Adapter);
++	u8				value8;
++	
++	switch( eRFPowerState )
++	{
++		case rf_on:								
++			if (bRegSSPwrLvl == 1)
++			{
++				// 1. Enable MAC Clock. Can not be enabled now.
++				//WriteXBYTE(REG_SYS_CLKR+1, ReadXBYTE(REG_SYS_CLKR+1) | BIT(3));
++				
++				// 2. Force PWM, Enable SPS18_LDO_Marco_Block
++				rtw_write8(Adapter, REG_SPS0_CTRL, 
++				rtw_read8(Adapter, REG_SPS0_CTRL) | (BIT0|BIT3));
++
++				// 3. restore BB, AFE control register.
++				//RF
++				if (pHalData->rf_type ==  RF_2T2R)
++					PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter, 0x380038, 1);							
++				else								
++					PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter, 0x38, 1);							
++				PHY_SetBBReg(Adapter, rOFDM0_TRxPathEnable, 0xf0, 1);
++				PHY_SetBBReg(Adapter, rFPGA0_RFMOD, BIT1, 0);
++
++				//AFE
++				//DbgPrint("0x0e70 = %x\n", Adapter->PS_BBRegBackup[PSBBREG_AFE0]);
++				//PHY_SetBBReg(Adapter, 0x0e70, bMaskDWord ,Adapter->PS_BBRegBackup[PSBBREG_AFE0] );
++				//PHY_SetBBReg(Adapter, 0x0e70, bMaskDWord ,0x631B25A0 );				
++				if (pHalData->rf_type ==  RF_2T2R)
++					PHY_SetBBReg(Adapter, rRx_Wait_CCA, bMaskDWord ,0x63DB25A0 );
++				else if (pHalData->rf_type ==  RF_1T1R)
++					PHY_SetBBReg(Adapter, rRx_Wait_CCA, bMaskDWord ,0x631B25A0 );
++
++				// 4. issue 3-wire command that RF set to Rx idle mode. This is used to re-write the RX idle mode.
++				// We can only prvide a usual value instead and then HW will modify the value by itself.
++				PHY_SetRFReg(Adapter,RF_PATH_A, 0, bRFRegOffsetMask,0x32D95);
++				if (pHalData->rf_type ==  RF_2T2R)
++				{
++					PHY_SetRFReg(Adapter,RF_PATH_B, 0, bRFRegOffsetMask,0x32D95);
++				}
++			}	
++			else		// Level 2 or others.
++			{
++				//h.	AFE_PLL_CTRL 0x28[7:0] = 0x80			//disable AFE PLL
++				rtw_write8(Adapter, REG_AFE_PLL_CTRL, 0x81);
++				
++				// i.	AFE_XTAL_CTRL 0x24[15:0] = 0x880F		//gated AFE DIG_CLOCK
++				rtw_write16(Adapter, REG_AFE_XTAL_CTRL, 0x800F);
++				rtw_mdelay_os(1);
++				
++				// 1. Enable MAC Clock. Can not be enabled now.
++				//WriteXBYTE(REG_SYS_CLKR+1, ReadXBYTE(REG_SYS_CLKR+1) | BIT(3));
++				
++				// 2. Force PWM, Enable SPS18_LDO_Marco_Block
++				rtw_write8(Adapter, REG_SPS0_CTRL, 
++				rtw_read8(Adapter, REG_SPS0_CTRL) | (BIT0|BIT3));
++
++				// 3. restore BB, AFE control register.
++				//RF
++				if (pHalData->rf_type ==  RF_2T2R)
++					PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter, 0x380038, 1);							
++				else								
++					PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter, 0x38, 1);							
++				PHY_SetBBReg(Adapter, rOFDM0_TRxPathEnable, 0xf0, 1);
++				PHY_SetBBReg(Adapter, rFPGA0_RFMOD, BIT1, 0);
++
++				//AFE
++				if (pHalData->rf_type ==  RF_2T2R)
++					PHY_SetBBReg(Adapter, rRx_Wait_CCA, bMaskDWord ,0x63DB25A0 );
++				else if (pHalData->rf_type ==  RF_1T1R)
++					PHY_SetBBReg(Adapter, rRx_Wait_CCA, bMaskDWord ,0x631B25A0 );
++
++				// 4. issue 3-wire command that RF set to Rx idle mode. This is used to re-write the RX idle mode.
++				// We can only prvide a usual value instead and then HW will modify the value by itself.
++				PHY_SetRFReg(Adapter,RF_PATH_A, 0, bRFRegOffsetMask,0x32D95);
++				if (pHalData->rf_type ==  RF_2T2R)
++				{
++					PHY_SetRFReg(Adapter,RF_PATH_B, 0, bRFRegOffsetMask,0x32D95);
++				}
++
++				// 5. gated MAC Clock
++				//WriteXBYTE(REG_SYS_CLKR+1, ReadXBYTE(REG_SYS_CLKR+1) & ~(BIT(3)));
++				//PlatformEFIOWrite1Byte(Adapter, REG_SYS_CLKR+1, PlatformEFIORead1Byte(Adapter, REG_SYS_CLKR+1)|(BIT3));
++
++				{
++					//u8 			eRFPath = RF_PATH_A,value8 = 0, retry = 0;
++					u8		bytetmp;
++					//PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)eRFPath, 0x0, bMaskByte0, 0x0);
++					// 2010/08/12 MH Add for B path under SS test. 
++					//if (pHalData->RF_Type ==  RF_2T2R)
++						//PHY_SetRFReg(Adapter, RF_PATH_B, 0x0, bMaskByte0, 0x0);
++
++					bytetmp = rtw_read8(Adapter, REG_APSD_CTRL);
++					rtw_write8(Adapter, REG_APSD_CTRL, bytetmp & ~BIT6);
++				
++					rtw_mdelay_os(10);
++
++					// Set BB reset at first
++					rtw_write8(Adapter, REG_SYS_FUNC_EN, 0x17 );//0x16		
++					//undo clock gated
++					rtw_write32(Adapter, rFPGA0_XCD_RFParameter, rtw_read32(Adapter, rFPGA0_XCD_RFParameter)&(~BIT31));
++					// Enable TX
++					rtw_write8(Adapter, REG_TXPAUSE, 0x0);
++				}
++				//Adapter->HalFunc.InitializeAdapterHandler(Adapter, Adapter->MgntInfo.dot11CurrentChannelNumber);
++				//CardSelectiveSuspendLeave(Adapter);
++			}
++
++			break;
++	   
++		case rf_sleep:
++		case rf_off:
++				value8 = rtw_read8(Adapter, REG_SPS0_CTRL) ;
++				if (IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID))
++					value8 &= ~(BIT0);
++				else
++					value8 &= ~(BIT0|BIT3);
++				if (bRegSSPwrLvl == 1)
++				{
++					//RT_TRACE(COMP_POWER, DBG_LOUD, ("SS LVL1\n"));
++					// Disable RF and BB only for SelectSuspend.
++					
++					// 1. Set BB/RF to shutdown.
++					//	(1) Reg878[5:3]= 0 	// RF rx_code for preamble power saving
++					//	(2)Reg878[21:19]= 0	//Turn off RF-B
++					//	(3) RegC04[7:4]= 0 	// turn off all paths for packet detection
++					//	(4) Reg800[1] = 1 		// enable preamble power saving
++					Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_RF0] = PHY_QueryBBReg(Adapter, rFPGA0_XAB_RFParameter, bMaskDWord);
++					Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_RF1] = PHY_QueryBBReg(Adapter, rOFDM0_TRxPathEnable, bMaskDWord);
++					Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_RF2] = PHY_QueryBBReg(Adapter, rFPGA0_RFMOD, bMaskDWord);
++					if (pHalData->rf_type ==  RF_2T2R)
++					{
++						PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter, 0x380038, 0);							
++					}
++					else if (pHalData->rf_type ==  RF_1T1R)
++					{
++						PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter, 0x38, 0);							
++					}
++					PHY_SetBBReg(Adapter, rOFDM0_TRxPathEnable, 0xf0, 0);						
++					PHY_SetBBReg(Adapter, rFPGA0_RFMOD, BIT1,1);
++					
++					// 2 .AFE control register to power down. bit[30:22]
++					Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_AFE0] = PHY_QueryBBReg(Adapter, rRx_Wait_CCA, bMaskDWord);	
++					if (pHalData->rf_type ==  RF_2T2R)
++						PHY_SetBBReg(Adapter, rRx_Wait_CCA, bMaskDWord ,0x00DB25A0);
++					else if (pHalData->rf_type ==  RF_1T1R)
++						PHY_SetBBReg(Adapter, rRx_Wait_CCA, bMaskDWord ,0x001B25A0);
++					
++					// 3. issue 3-wire command that RF set to power down.
++					PHY_SetRFReg(Adapter,RF_PATH_A, 0, bRFRegOffsetMask,0);
++					if (pHalData->rf_type ==  RF_2T2R)
++					{
++						PHY_SetRFReg(Adapter,RF_PATH_B, 0, bRFRegOffsetMask,0);
++					}
++
++					// 4. Force PFM , disable SPS18_LDO_Marco_Block					
++					rtw_write8(Adapter, REG_SPS0_CTRL, value8);
++
++					// 5. gated MAC Clock
++					//WriteXBYTE(REG_SYS_CLKR+1, ReadXBYTE(REG_SYS_CLKR+1) & ~(BIT(3)));
++				}
++				else	// Level 2 or others.
++				{
++					//RT_TRACE(COMP_POWER, DBG_LOUD, ("SS LVL2\n"));
++					{
++						u8 			eRFPath = RF_PATH_A,value8 = 0;
++						rtw_write8(Adapter, REG_TXPAUSE, 0xFF);
++						PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)eRFPath, 0x0, bMaskByte0, 0x0);
++						// 2010/08/12 MH Add for B path under SS test. 
++						//if (pHalData->RF_Type ==  RF_2T2R)
++							//PHY_SetRFReg(Adapter, RF_PATH_B, 0x0, bMaskByte0, 0x0);
++
++						value8 |= APSDOFF;
++						rtw_write8(Adapter, REG_APSD_CTRL, value8);//0x40
++
++						// After switch APSD, we need to delay for stability
++						rtw_mdelay_os(10);
++						//before BB reset should do clock gated
++						rtw_write32(Adapter, rFPGA0_XCD_RFParameter, rtw_read32(Adapter, rFPGA0_XCD_RFParameter)|(BIT31));
++						// Set BB reset at first
++						value8 = 0 ; 
++						value8 |=( FEN_USBD | FEN_USBA | FEN_BB_GLB_RSTn);
++						rtw_write8(Adapter, REG_SYS_FUNC_EN,value8 );//0x16			
++					}
++
++					// Disable RF and BB only for SelectSuspend.
++
++					// 1. Set BB/RF to shutdown.
++					//	(1) Reg878[5:3]= 0 	// RF rx_code for preamble power saving
++					//	(2)Reg878[21:19]= 0	//Turn off RF-B
++					//	(3) RegC04[7:4]= 0 	// turn off all paths for packet detection
++					//	(4) Reg800[1] = 1 		// enable preamble power saving
++					Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_RF0] = PHY_QueryBBReg(Adapter, rFPGA0_XAB_RFParameter, bMaskDWord);
++					Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_RF1] = PHY_QueryBBReg(Adapter, rOFDM0_TRxPathEnable, bMaskDWord);
++					Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_RF2] = PHY_QueryBBReg(Adapter, rFPGA0_RFMOD, bMaskDWord);
++					if (pHalData->rf_type ==  RF_2T2R)
++					{
++						PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter, 0x380038, 0);							
++					}
++					else if (pHalData->rf_type ==  RF_1T1R)
++					{
++						PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter, 0x38, 0);							
++					}
++					PHY_SetBBReg(Adapter, rOFDM0_TRxPathEnable, 0xf0, 0);						
++					PHY_SetBBReg(Adapter, rFPGA0_RFMOD, BIT1,1);
++					
++					// 2 .AFE control register to power down. bit[30:22]
++					Adapter->pwrctrlpriv.PS_BBRegBackup[PSBBREG_AFE0] = PHY_QueryBBReg(Adapter, rRx_Wait_CCA, bMaskDWord);	
++					if (pHalData->rf_type ==  RF_2T2R)
++						PHY_SetBBReg(Adapter, rRx_Wait_CCA, bMaskDWord ,0x00DB25A0);
++					else if (pHalData->rf_type ==  RF_1T1R)
++						PHY_SetBBReg(Adapter, rRx_Wait_CCA, bMaskDWord ,0x001B25A0);
++					
++					// 3. issue 3-wire command that RF set to power down.
++					PHY_SetRFReg(Adapter,RF_PATH_A, 0, bRFRegOffsetMask,0);
++					if (pHalData->rf_type ==  RF_2T2R)
++					{
++						PHY_SetRFReg(Adapter,RF_PATH_B, 0, bRFRegOffsetMask,0);
++					}
++
++					// 4. Force PFM , disable SPS18_LDO_Marco_Block
++					rtw_write8(Adapter, REG_SPS0_CTRL, value8);
++
++					// 2010/10/13 MH/Isaachsu exchange sequence.
++					//h.	AFE_PLL_CTRL 0x28[7:0] = 0x80			//disable AFE PLL
++					rtw_write8(Adapter, REG_AFE_PLL_CTRL, 0x80);
++					rtw_mdelay_os(1);
++
++					// i.	AFE_XTAL_CTRL 0x24[15:0] = 0x880F		//gated AFE DIG_CLOCK
++					rtw_write16(Adapter, REG_AFE_XTAL_CTRL, 0xA80F);
++
++					// 5. gated MAC Clock
++					//WriteXBYTE(REG_SYS_CLKR+1, ReadXBYTE(REG_SYS_CLKR+1) & ~(BIT(3)));
++					//PlatformEFIOWrite1Byte(Adapter, REG_SYS_CLKR+1, PlatformEFIORead1Byte(Adapter, REG_SYS_CLKR+1)& ~(BIT3))
++					
++					//CardSelectiveSuspendEnter(Adapter);
++				}
++
++			break;
++
++		default:
++			break;
++	} 
++	
++}	// phy_PowerSwitch92CU
++
++void _ps_open_RF(_adapter *padapter) {
++	//here call with bRegSSPwrLvl 1, bRegSSPwrLvl 2 needs to be verified
++	phy_SsPwrSwitch92CU(padapter, rf_on, 1);
++}
++
++void _ps_close_RF(_adapter *padapter){
++	//here call with bRegSSPwrLvl 1, bRegSSPwrLvl 2 needs to be verified
++	phy_SsPwrSwitch92CU(padapter, rf_off, 1);
++}
++#endif //SYNC_SD7_20110802_phy_SsPwrSwitch92CU
++
++
++
++static VOID 
++_DisableGPIO(
++	IN	PADAPTER	Adapter
++	)
++{
++/***************************************
++j. GPIO_PIN_CTRL 0x44[31:0]=0x000		// 
++k. Value = GPIO_PIN_CTRL[7:0]
++l.  GPIO_PIN_CTRL 0x44[31:0] = 0x00FF0000 | (value <<8); //write external PIN level
++m. GPIO_MUXCFG 0x42 [15:0] = 0x0780
++n. LEDCFG 0x4C[15:0] = 0x8080
++***************************************/
++	u8	value8;
++	u16	value16;
++	u32	value32;
++
++	//1. Disable GPIO[7:0]
++	rtw_write16(Adapter, REG_GPIO_PIN_CTRL+2, 0x0000);
++    	value32 = rtw_read32(Adapter, REG_GPIO_PIN_CTRL) & 0xFFFF00FF;  
++	value8 = (u8) (value32&0x000000FF);
++	value32 |= ((value8<<8) | 0x00FF0000);
++	rtw_write32(Adapter, REG_GPIO_PIN_CTRL, value32);
++	      
++	//2. Disable GPIO[10:8]          
++	rtw_write8(Adapter, REG_GPIO_MUXCFG+3, 0x00);
++	    value16 = rtw_read16(Adapter, REG_GPIO_MUXCFG+2) & 0xFF0F;  
++	value8 = (u8) (value16&0x000F);
++	value16 |= ((value8<<4) | 0x0780);
++	rtw_write16(Adapter, REG_GPIO_MUXCFG+2, value16);
++
++	//3. Disable LED0 & 1
++	rtw_write16(Adapter, REG_LEDCFG0, 0x8080);
++
++	//RT_TRACE(COMP_INIT, DBG_LOUD, ("======> Disable GPIO and LED.\n"));
++ 
++} //end of _DisableGPIO()
++
++static VOID
++_ResetFWDownloadRegister(
++	IN PADAPTER			Adapter
++	)
++{
++	u32	value32;
++
++	value32 = rtw_read32(Adapter, REG_MCUFWDL);
++	value32 &= ~(MCUFWDL_EN | MCUFWDL_RDY);
++	rtw_write32(Adapter, REG_MCUFWDL, value32);
++	//RT_TRACE(COMP_INIT, DBG_LOUD, ("Reset FW download register.\n"));
++}
++
++
++static int
++_DisableRF_AFE(
++	IN PADAPTER			Adapter
++	)
++{
++	int		rtStatus = _SUCCESS;
++	u32			pollingCount = 0;
++	u8			value8;
++	
++	//disable RF/ AFE AD/DA
++	value8 = APSDOFF;
++	rtw_write8(Adapter, REG_APSD_CTRL, value8);
++
++
++#if (RTL8192CU_ASIC_VERIFICATION)
++
++	do
++	{
++		if(rtw_read8(Adapter, REG_APSD_CTRL) & APSDOFF_STATUS){
++			//RT_TRACE(COMP_INIT, DBG_LOUD, ("Disable RF, AFE, AD, DA Done!\n"));
++			break;
++		}
++
++		if(pollingCount++ > POLLING_READY_TIMEOUT_COUNT){
++			//RT_TRACE(COMP_INIT, DBG_SERIOUS, ("Failed to polling APSDOFF_STATUS done!\n"));
++			return _FAIL;
++		}
++				
++	}while(_TRUE);
++	
++#endif
++
++	//RT_TRACE(COMP_INIT, DBG_LOUD, ("Disable RF, AFE,AD, DA.\n"));
++	return rtStatus;
++
++}
++
++static VOID
++_ResetBB(
++	IN PADAPTER			Adapter
++	)
++{
++	u16	value16;
++	
++	//before BB reset should do clock gated
++	rtw_write32(Adapter, rFPGA0_XCD_RFParameter, rtw_read32(Adapter, rFPGA0_XCD_RFParameter)|(BIT31));
++	//reset BB
++	value16 = rtw_read16(Adapter, REG_SYS_FUNC_EN);
++	value16 &= ~(FEN_BBRSTB | FEN_BB_GLB_RSTn);
++	rtw_write16(Adapter, REG_SYS_FUNC_EN, value16);
++	//RT_TRACE(COMP_INIT, DBG_LOUD, ("Reset BB.\n"));
++}
++
++static VOID
++_ResetMCU(
++	IN PADAPTER			Adapter
++	)
++{
++	u16	value16;
++	
++	// reset MCU
++	value16 = rtw_read16(Adapter, REG_SYS_FUNC_EN);
++	value16 &= ~FEN_CPUEN;
++	rtw_write16(Adapter, REG_SYS_FUNC_EN, value16);
++	//RT_TRACE(COMP_INIT, DBG_LOUD, ("Reset MCU.\n"));
++}
++
++static VOID
++_DisableMAC_AFE_PLL(
++	IN PADAPTER			Adapter
++	)
++{
++	u32	value32;
++	
++	//disable MAC/ AFE PLL
++	value32 = rtw_read32(Adapter, REG_APS_FSMCO);
++	value32 |= APDM_MAC;
++	rtw_write32(Adapter, REG_APS_FSMCO, value32);
++	
++	value32 |= APFM_OFF;
++	rtw_write32(Adapter, REG_APS_FSMCO, value32);
++	//RT_TRACE(COMP_INIT, DBG_LOUD, ("Disable MAC, AFE PLL.\n"));
++}
++
++static VOID
++_AutoPowerDownToHostOff(
++	IN	PADAPTER		Adapter
++	)
++{
++	u32			value32;
++	rtw_write8(Adapter, REG_SPS0_CTRL, 0x22);
++
++	value32 = rtw_read32(Adapter, REG_APS_FSMCO);	
++	
++	value32 |= APDM_HOST;//card disable
++	rtw_write32(Adapter, REG_APS_FSMCO, value32);
++	//RT_TRACE(COMP_INIT, DBG_LOUD, ("Auto Power Down to Host-off state.\n"));
++
++	// set USB suspend
++	value32 = rtw_read32(Adapter, REG_APS_FSMCO);
++	value32 &= ~AFSM_PCIE;
++	rtw_write32(Adapter, REG_APS_FSMCO, value32);
++
++}
++
++static VOID
++_SetUsbSuspend(
++	IN PADAPTER			Adapter
++	)
++{
++	u32			value32;
++
++	value32 = rtw_read32(Adapter, REG_APS_FSMCO);
++	
++	// set USB suspend
++	value32 |= AFSM_HSUS;
++	rtw_write32(Adapter, REG_APS_FSMCO, value32);
++
++	//RT_ASSERT(0 == (rtw_read32(Adapter, REG_APS_FSMCO) & BIT(12)),(""));
++	//RT_TRACE(COMP_INIT, DBG_LOUD, ("Set USB suspend.\n"));
++	
++}
++
++static VOID
++_DisableRFAFEAndResetBB(
++	IN PADAPTER			Adapter
++	)
++{
++/**************************************
++a.	TXPAUSE 0x522[7:0] = 0xFF             //Pause MAC TX queue
++b.	RF path 0 offset 0x00 = 0x00            // disable RF
++c. 	APSD_CTRL 0x600[7:0] = 0x40
++d.	SYS_FUNC_EN 0x02[7:0] = 0x16		//reset BB state machine
++e.	SYS_FUNC_EN 0x02[7:0] = 0x14		//reset BB state machine
++***************************************/
++	u8 eRFPath = 0,value8 = 0;
++	rtw_write8(Adapter, REG_TXPAUSE, 0xFF);
++	PHY_SetRFReg(Adapter, (RF_RADIO_PATH_E)eRFPath, 0x0, bMaskByte0, 0x0);
++
++	value8 |= APSDOFF;
++	rtw_write8(Adapter, REG_APSD_CTRL, value8);//0x40
++	//before BB reset should do clock gated
++	rtw_write32(Adapter, rFPGA0_XCD_RFParameter, rtw_read32(Adapter, rFPGA0_XCD_RFParameter)|(BIT31));
++	value8 = 0 ; 
++	value8 |=( FEN_USBD | FEN_USBA | FEN_BB_GLB_RSTn);
++	rtw_write8(Adapter, REG_SYS_FUNC_EN,value8 );//0x16		
++	
++	value8 &=( ~FEN_BB_GLB_RSTn );
++	rtw_write8(Adapter, REG_SYS_FUNC_EN, value8); //0x14		
++	
++	//RT_TRACE(COMP_INIT, DBG_LOUD, ("======> RF off and reset BB.\n"));
++}
++
++static VOID
++_ResetDigitalProcedure1(
++	IN 	PADAPTER			Adapter,
++	IN	BOOLEAN				bWithoutHWSM	
++	)
++{
++
++	HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
++
++	if(pHalData->FirmwareVersion <=  0x20){
++		#if 0
++		/*****************************
++		f.	SYS_FUNC_EN 0x03[7:0]=0x54		// reset MAC register, DCORE
++		g.	MCUFWDL 0x80[7:0]=0				// reset MCU ready status
++		******************************/
++		u4Byte	value32 = 0;
++		PlatformIOWrite1Byte(Adapter, REG_SYS_FUNC_EN+1, 0x54);
++		PlatformIOWrite1Byte(Adapter, REG_MCUFWDL, 0);	
++		#else
++		/*****************************
++		f.	MCUFWDL 0x80[7:0]=0				// reset MCU ready status
++		g.	SYS_FUNC_EN 0x02[10]= 0			// reset MCU register, (8051 reset)
++		h.	SYS_FUNC_EN 0x02[15-12]= 5		// reset MAC register, DCORE
++		i.     SYS_FUNC_EN 0x02[10]= 1			// enable MCU register, (8051 enable)
++		******************************/
++			u16 valu16 = 0;
++			rtw_write8(Adapter, REG_MCUFWDL, 0);
++
++			valu16 = rtw_read16(Adapter, REG_SYS_FUNC_EN);	
++			rtw_write16(Adapter, REG_SYS_FUNC_EN, (valu16 & (~FEN_CPUEN)));//reset MCU ,8051
++
++			valu16 = rtw_read16(Adapter, REG_SYS_FUNC_EN)&0x0FFF;	
++			rtw_write16(Adapter, REG_SYS_FUNC_EN, (valu16 |(FEN_HWPDN|FEN_ELDR)));//reset MAC
++			
++			#ifdef DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE
++			{
++				u8 val;
++				if( (val=rtw_read8(Adapter, REG_MCUFWDL)))
++					DBG_871X("DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE %s:%d REG_MCUFWDL:0x%02x\n", __FUNCTION__, __LINE__, val);
++			}
++			#endif
++
++			
++			valu16 = rtw_read16(Adapter, REG_SYS_FUNC_EN);	
++			rtw_write16(Adapter, REG_SYS_FUNC_EN, (valu16 | FEN_CPUEN));//enable MCU ,8051	
++
++		
++		#endif
++	}
++	else{
++		u8 retry_cnts = 0;	
++		
++		if(rtw_read8(Adapter, REG_MCUFWDL) & BIT1)
++		{ //IF fw in RAM code, do reset 
++
++			rtw_write8(Adapter, REG_MCUFWDL, 0);
++			if(Adapter->bFWReady){
++				// 2010/08/25 MH Accordign to RD alfred's suggestion, we need to disable other
++				// HRCV INT to influence 8051 reset.
++				rtw_write8(Adapter, REG_FWIMR, 0x20);
++				
++				rtw_write8(Adapter, REG_HMETFR+3, 0x20);//8051 reset by self
++
++				while( (retry_cnts++ <100) && (FEN_CPUEN &rtw_read16(Adapter, REG_SYS_FUNC_EN)))
++				{					
++					rtw_udelay_os(50);//PlatformStallExecution(50);//us
++				}
++
++				if(retry_cnts >= 100){
++					DBG_8192C("%s #####=> 8051 reset failed!.........................\n", __FUNCTION__);
++					// if 8051 reset fail we trigger GPIO 0 for LA
++					//PlatformEFIOWrite4Byte(	Adapter, 
++					//						REG_GPIO_PIN_CTRL, 
++					//						0x00010100);
++					// 2010/08/31 MH According to Filen's info, if 8051 reset fail, reset MAC directly.
++					rtw_write8(Adapter, REG_SYS_FUNC_EN+1, 0x50);	//Reset MAC and Enable 8051
++					rtw_mdelay_os(10);
++				}
++				else {
++					//DBG_871X("%s =====> 8051 reset success (%d) .\n", __FUNCTION__, retry_cnts);
++				}
++			}
++			else {
++				DBG_871X("%s =====> 8051 in RAM but !Adapter->bFWReady\n", __FUNCTION__);	
++			}
++		}
++		else{
++			//DBG_871X("%s =====> 8051 in ROM.\n", __FUNCTION__);
++		}	
++		
++		#ifdef DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE
++		{
++			u8 val;
++			if( (val=rtw_read8(Adapter, REG_MCUFWDL)))
++				DBG_871X("DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE %s:%d REG_MCUFWDL:0x%02x\n", __FUNCTION__, __LINE__, val);
++		}
++		#endif
++		
++		rtw_write8(Adapter, REG_SYS_FUNC_EN+1, 0x54);	//Reset MAC and Enable 8051
++	}
++
++	// Clear rpwm value for initial toggle bit trigger.
++	rtw_write8(Adapter, REG_USB_HRPWM, 0x00);
++
++	if(bWithoutHWSM){
++	/*****************************
++		Without HW auto state machine
++	g.	SYS_CLKR 0x08[15:0] = 0x30A3			//disable MAC clock
++	h.	AFE_PLL_CTRL 0x28[7:0] = 0x80			//disable AFE PLL
++	i.	AFE_XTAL_CTRL 0x24[15:0] = 0x880F		//gated AFE DIG_CLOCK
++	j.	SYS_ISO_CTRL 0x00[7:0] = 0xF9			// isolated digital to PON
++	******************************/	
++		//rtw_write16(Adapter, REG_SYS_CLKR, 0x30A3);
++		rtw_write16(Adapter, REG_SYS_CLKR, 0x70A3);//modify to 0x70A3 by Scott.
++		rtw_write8(Adapter, REG_AFE_PLL_CTRL, 0x80);		
++		rtw_write16(Adapter, REG_AFE_XTAL_CTRL, 0x880F);
++		rtw_write8(Adapter, REG_SYS_ISO_CTRL, 0xF9);		
++	}
++	else
++	{		
++		// Disable all RF/BB power 
++		rtw_write8(Adapter, REG_RF_CTRL, 0x00);
++	}
++	//RT_TRACE(COMP_INIT, DBG_LOUD, ("======> Reset Digital.\n"));
++
++}
++
++static VOID
++_ResetDigitalProcedure2(
++	IN 	PADAPTER			Adapter
++)
++{
++/*****************************
++k.	SYS_FUNC_EN 0x03[7:0] = 0x44			// disable ELDR runction
++l.	SYS_CLKR 0x08[15:0] = 0x3083			// disable ELDR clock
++m.	SYS_ISO_CTRL 0x01[7:0] = 0x83			// isolated ELDR to PON
++******************************/
++	//rtw_write8(Adapter, REG_SYS_FUNC_EN+1, 0x44);//marked by Scott.
++	//rtw_write16(Adapter, REG_SYS_CLKR, 0x3083);
++	//rtw_write8(Adapter, REG_SYS_ISO_CTRL+1, 0x83);
++
++ 	rtw_write16(Adapter, REG_SYS_CLKR, 0x70a3); //modify to 0x70a3 by Scott.
++ 	rtw_write8(Adapter, REG_SYS_ISO_CTRL+1, 0x82); //modify to 0x82 by Scott.
++}
++
++static VOID
++_DisableAnalog(
++	IN PADAPTER			Adapter,
++	IN BOOLEAN			bWithoutHWSM	
++	)
++{
++	u16 value16 = 0;
++	u8 value8=0;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	
++	if(bWithoutHWSM){
++	/*****************************
++	n.	LDOA15_CTRL 0x20[7:0] = 0x04		// disable A15 power
++	o.	LDOV12D_CTRL 0x21[7:0] = 0x54		// disable digital core power
++	r.	When driver call disable, the ASIC will turn off remaining clock automatically 
++	******************************/
++	
++		rtw_write8(Adapter, REG_LDOA15_CTRL, 0x04);
++		//PlatformIOWrite1Byte(Adapter, REG_LDOV12D_CTRL, 0x54);		
++		
++		value8 = rtw_read8(Adapter, REG_LDOV12D_CTRL);		
++		value8 &= (~LDV12_EN);
++		rtw_write8(Adapter, REG_LDOV12D_CTRL, value8);	
++		//RT_TRACE(COMP_INIT, DBG_LOUD, (" REG_LDOV12D_CTRL Reg0x21:0x%02x.\n",value8));
++	}
++	
++/*****************************
++h.	SPS0_CTRL 0x11[7:0] = 0x23			//enter PFM mode
++i.	APS_FSMCO 0x04[15:0] = 0x4802		// set USB suspend 
++******************************/	
++
++
++	value8 = 0x23;
++	if (IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID))
++		value8 |= BIT3;
++
++	rtw_write8(Adapter, REG_SPS0_CTRL, value8);
++
++
++	if(bWithoutHWSM)
++	{			
++		//value16 |= (APDM_HOST | /*AFSM_HSUS |*/PFM_ALDN);
++		// 2010/08/31 According to Filen description, we need to use HW to shut down 8051 automatically.
++		// Becasue suspend operatione need the asistance of 8051 to wait for 3ms.
++		value16 |= (APDM_HOST | AFSM_HSUS |PFM_ALDN);
++	}
++	else
++	{			
++		value16 |= (APDM_HOST | AFSM_HSUS |PFM_ALDN);
++	}
++
++	rtw_write16(Adapter, REG_APS_FSMCO,value16 );//0x4802 
++
++	rtw_write8(Adapter, REG_RSV_CTRL, 0x0e);
++
++ #if 0
++ 	//tynli_test for suspend mode.
++	if(!bWithoutHWSM){
++ 		rtw_write8(Adapter, 0xfe10, 0x19);
++	} 
++#endif
++
++	//RT_TRACE(COMP_INIT, DBG_LOUD, ("======> Disable Analog Reg0x04:0x%04x.\n",value16));
++}
++
++static int	
++CardDisableHWSM( // HW Auto state machine
++	IN	PADAPTER		Adapter,
++	IN	BOOLEAN			resetMCU
++	)
++{
++	int		rtStatus = _SUCCESS;
++	if(Adapter->bSurpriseRemoved){
++		return rtStatus;
++	}
++#if 1
++	//==== RF Off Sequence ====
++	_DisableRFAFEAndResetBB(Adapter);
++
++	//  ==== Reset digital sequence   ======
++	_ResetDigitalProcedure1(Adapter, _FALSE);
++	
++	//  ==== Pull GPIO PIN to balance level and LED control ======
++	_DisableGPIO(Adapter);
++
++	//  ==== Disable analog sequence ===
++	_DisableAnalog(Adapter, _FALSE);
++
++	RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("======> Card disable finished.\n"));
++#else
++	_DisableGPIO(Adapter);
++	
++	//reset FW download register
++	_ResetFWDownloadRegister(Adapter);
++
++
++	//disable RF/ AFE AD/DA
++	rtStatus = _DisableRF_AFE(Adapter);
++	if(RT_STATUS_SUCCESS != rtStatus){
++		RT_TRACE(COMP_INIT, DBG_SERIOUS, ("_DisableRF_AFE failed!\n"));
++		goto Exit;
++	}
++	_ResetBB(Adapter);
++
++	if(resetMCU){
++		_ResetMCU(Adapter);
++	}
++
++	_AutoPowerDownToHostOff(Adapter);
++	//_DisableMAC_AFE_PLL(Adapter);
++	
++	_SetUsbSuspend(Adapter);
++Exit:
++#endif
++	return rtStatus;
++	
++}
++
++static int	
++CardDisableWithoutHWSM( // without HW Auto state machine
++	IN	PADAPTER		Adapter	
++	)
++{
++	int		rtStatus = _SUCCESS;
++
++	if(Adapter->bSurpriseRemoved){
++		return rtStatus;
++	}
++	//RT_TRACE(COMP_INIT, DBG_LOUD, ("======> Card Disable Without HWSM .\n"));
++	//==== RF Off Sequence ====
++	_DisableRFAFEAndResetBB(Adapter);
++
++	//  ==== Reset digital sequence   ======
++	_ResetDigitalProcedure1(Adapter, _TRUE);
++
++	//  ==== Pull GPIO PIN to balance level and LED control ======
++	_DisableGPIO(Adapter);
++
++	//  ==== Reset digital sequence   ======
++	_ResetDigitalProcedure2(Adapter);
++
++	//  ==== Disable analog sequence ===
++	_DisableAnalog(Adapter, _TRUE);
++	//RT_TRACE(COMP_INIT, DBG_LOUD, ("<====== Card Disable Without HWSM .\n"));
++	return rtStatus;
++}
++
++static void rtl8192cu_hw_power_down(_adapter *padapter)
++{
++	// 2010/-8/09 MH For power down module, we need to enable register block contrl reg at 0x1c.
++	// Then enable power down control bit of register 0x04 BIT4 and BIT15 as 1.
++		
++	// Enable register area 0x0-0xc.
++	rtw_write8(padapter,REG_RSV_CTRL, 0x0);			
++	rtw_write16(padapter, REG_APS_FSMCO, 0x8812);
++}
++
++u32 rtl8192cu_hal_deinit(PADAPTER Adapter)
++ {
++
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++   	DBG_8192C("==> %s \n",__FUNCTION__);
++	// 2011/02/18 To Fix RU LNA  power leakage problem. We need to execute below below in
++	// Adapter init and halt sequence. Accordingto EEchou's opinion, we can enable the ability for all
++	// IC. Accord to johnny's opinion, only RU need the support.
++	if (IS_HARDWARE_TYPE_8192C(Adapter)  && (pHalData->BoardType == BOARD_USB_High_PA))
++		rtw_write32(Adapter, rFPGA0_XCD_RFParameter, rtw_read32(Adapter, rFPGA0_XCD_RFParameter)|BIT1);
++
++ #ifdef SUPPORT_HW_RFOFF_DETECTED
++ 	DBG_8192C("bkeepfwalive(%x)\n",Adapter->pwrctrlpriv.bkeepfwalive);
++ 	if(Adapter->pwrctrlpriv.bkeepfwalive)
++ 	{
++		_ps_close_RF(Adapter);		
++		if((Adapter->pwrctrlpriv.bHWPwrPindetect) && (Adapter->pwrctrlpriv.bHWPowerdown))		
++			rtl8192cu_hw_power_down(Adapter);
++ 	}
++	else
++#endif
++	{
++		if( Adapter->bCardDisableWOHSM == _FALSE)
++		{
++			DBG_8192C("card disble HWSM...........\n");
++			CardDisableHWSM(Adapter, _FALSE);
++		}
++		else
++		{
++			DBG_8192C("card disble without HWSM...........\n");
++			CardDisableWithoutHWSM(Adapter); // without HW Auto state machine		
++
++			if((Adapter->pwrctrlpriv.bHWPwrPindetect ) && (Adapter->pwrctrlpriv.bHWPowerdown))		
++				rtl8192cu_hw_power_down(Adapter);
++		}
++	}
++	
++	return _SUCCESS;
++ }
++
++
++unsigned int rtl8192cu_inirp_init(PADAPTER Adapter)
++{	
++	u8 i;	
++	struct recv_buf *precvbuf;
++	uint	status;
++	struct dvobj_priv *pdev = adapter_to_dvobj(Adapter);
++	struct intf_hdl * pintfhdl=&Adapter->iopriv.intf;
++	struct recv_priv *precvpriv = &(Adapter->recvpriv);
++	u32 (*_read_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem);
++#ifdef CONFIG_USB_INTERRUPT_IN_PIPE
++	u32 (*_read_interrupt)(struct intf_hdl *pintfhdl, u32 addr);
++#endif
++
++_func_enter_;
++
++	_read_port = pintfhdl->io_ops._read_port;
++
++	status = _SUCCESS;
++
++	RT_TRACE(_module_hci_hal_init_c_,_drv_info_,("===> usb_inirp_init \n"));	
++		
++	precvpriv->ff_hwaddr = RECV_BULK_IN_ADDR;
++
++	//issue Rx irp to receive data	
++	precvbuf = (struct recv_buf *)precvpriv->precv_buf;	
++	for(i=0; i<NR_RECVBUFF; i++)
++	{
++		if(_read_port(pintfhdl, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf) == _FALSE )
++		{
++			RT_TRACE(_module_hci_hal_init_c_,_drv_err_,("usb_rx_init: usb_read_port error \n"));
++			status = _FAIL;
++			goto exit;
++		}
++		
++		precvbuf++;		
++		precvpriv->free_recv_buf_queue_cnt--;
++	}
++
++#ifdef CONFIG_USB_INTERRUPT_IN_PIPE
++	_read_interrupt = pintfhdl->io_ops._read_interrupt;
++	if(_read_interrupt(pintfhdl, RECV_INT_IN_ADDR) == _FALSE )
++	{
++		RT_TRACE(_module_hci_hal_init_c_,_drv_err_,("usb_rx_init: usb_read_interrupt error \n"));
++		status = _FAIL;
++	}
++#endif
++
++exit:
++	
++	RT_TRACE(_module_hci_hal_init_c_,_drv_info_,("<=== usb_inirp_init \n"));
++
++_func_exit_;
++
++	return status;
++
++}
++
++unsigned int rtl8192cu_inirp_deinit(PADAPTER Adapter)
++{	
++	RT_TRACE(_module_hci_hal_init_c_,_drv_info_,("\n ===> usb_rx_deinit \n"));
++	
++	rtw_read_port_cancel(Adapter);
++
++	RT_TRACE(_module_hci_hal_init_c_,_drv_info_,("\n <=== usb_rx_deinit \n"));
++
++	return _SUCCESS;
++}
++
++
++//-------------------------------------------------------------------------
++//
++//	EEPROM Power index mapping
++//
++//-------------------------------------------------------------------------
++
++ static VOID
++_ReadPowerValueFromPROM(
++	IN	PTxPowerInfo	pwrInfo,
++	IN	u8*			PROMContent,
++	IN	BOOLEAN			AutoLoadFail
++	)
++{
++	u32 rfPath, eeAddr, group;
++
++	_rtw_memset(pwrInfo, 0, sizeof(TxPowerInfo));
++
++	if(AutoLoadFail){		
++		for(group = 0 ; group < CHANNEL_GROUP_MAX ; group++){
++			for(rfPath = 0 ; rfPath < RF_PATH_MAX ; rfPath++){
++				pwrInfo->CCKIndex[rfPath][group]		= EEPROM_Default_TxPowerLevel;	
++				pwrInfo->HT40_1SIndex[rfPath][group]	= EEPROM_Default_TxPowerLevel;
++				pwrInfo->HT40_2SIndexDiff[rfPath][group]= EEPROM_Default_HT40_2SDiff;
++				pwrInfo->HT20IndexDiff[rfPath][group]	= EEPROM_Default_HT20_Diff;
++				pwrInfo->OFDMIndexDiff[rfPath][group]	= EEPROM_Default_LegacyHTTxPowerDiff;
++				pwrInfo->HT40MaxOffset[rfPath][group]	= EEPROM_Default_HT40_PwrMaxOffset;		
++				pwrInfo->HT20MaxOffset[rfPath][group]	= EEPROM_Default_HT20_PwrMaxOffset;
++			}
++		}
++
++		pwrInfo->TSSI_A = EEPROM_Default_TSSI;
++		pwrInfo->TSSI_B = EEPROM_Default_TSSI;
++		
++		return;
++	}
++	
++	for(rfPath = 0 ; rfPath < RF_PATH_MAX ; rfPath++){
++		for(group = 0 ; group < CHANNEL_GROUP_MAX ; group++){
++			eeAddr = EEPROM_CCK_TX_PWR_INX + (rfPath * 3) + group;
++			pwrInfo->CCKIndex[rfPath][group] = PROMContent[eeAddr];
++
++			eeAddr = EEPROM_HT40_1S_TX_PWR_INX + (rfPath * 3) + group;
++			pwrInfo->HT40_1SIndex[rfPath][group] = PROMContent[eeAddr];
++		}
++	}
++
++	for(group = 0 ; group < CHANNEL_GROUP_MAX ; group++){
++		for(rfPath = 0 ; rfPath < RF_PATH_MAX ; rfPath++){
++			pwrInfo->HT40_2SIndexDiff[rfPath][group] = 
++			(PROMContent[EEPROM_HT40_2S_TX_PWR_INX_DIFF + group] >> (rfPath * 4)) & 0xF;
++
++#if 1
++			pwrInfo->HT20IndexDiff[rfPath][group] =
++			(PROMContent[EEPROM_HT20_TX_PWR_INX_DIFF + group] >> (rfPath * 4)) & 0xF;
++			if(pwrInfo->HT20IndexDiff[rfPath][group] & BIT3)	//4bit sign number to 8 bit sign number
++				pwrInfo->HT20IndexDiff[rfPath][group] |= 0xF0;
++#else
++			pwrInfo->HT20IndexDiff[rfPath][group] =
++			(PROMContent[EEPROM_HT20_TX_PWR_INX_DIFF + group] >> (rfPath * 4)) & 0xF;
++#endif
++
++			pwrInfo->OFDMIndexDiff[rfPath][group] =
++			(PROMContent[EEPROM_OFDM_TX_PWR_INX_DIFF+ group] >> (rfPath * 4)) & 0xF;
++
++			pwrInfo->HT40MaxOffset[rfPath][group] =
++			(PROMContent[EEPROM_HT40_MAX_PWR_OFFSET+ group] >> (rfPath * 4)) & 0xF;
++
++			pwrInfo->HT20MaxOffset[rfPath][group] =
++			(PROMContent[EEPROM_HT20_MAX_PWR_OFFSET+ group] >> (rfPath * 4)) & 0xF;
++		}
++	}
++
++	pwrInfo->TSSI_A = PROMContent[EEPROM_TSSI_A];
++	pwrInfo->TSSI_B = PROMContent[EEPROM_TSSI_B];
++
++}
++
++
++static u32
++_GetChannelGroup(
++	IN	u32	channel
++	)
++{
++	//RT_ASSERT((channel < 14), ("Channel %d no is supported!\n"));
++
++	if(channel < 3){ 	// Channel 1~3
++		return 0;
++	}
++	else if(channel < 9){ // Channel 4~9
++		return 1;
++	}
++
++	return 2;				// Channel 10~14	
++}
++
++
++static VOID
++ReadTxPowerInfo(
++	IN	PADAPTER 		Adapter,
++	IN	u8*			PROMContent,
++	IN	BOOLEAN			AutoLoadFail
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	TxPowerInfo		pwrInfo;
++	u32			rfPath, ch, group;
++	u8			pwr, diff;
++
++	_ReadPowerValueFromPROM(&pwrInfo, PROMContent, AutoLoadFail);
++
++	if(!AutoLoadFail)
++		pHalData->bTXPowerDataReadFromEEPORM = _TRUE;
++
++	for(rfPath = 0 ; rfPath < RF_PATH_MAX ; rfPath++){
++		for(ch = 0 ; ch < CHANNEL_MAX_NUMBER ; ch++){
++			group = _GetChannelGroup(ch);
++
++			pHalData->TxPwrLevelCck[rfPath][ch]		= pwrInfo.CCKIndex[rfPath][group];
++			pHalData->TxPwrLevelHT40_1S[rfPath][ch]	= pwrInfo.HT40_1SIndex[rfPath][group];
++
++			pHalData->TxPwrHt20Diff[rfPath][ch]		= pwrInfo.HT20IndexDiff[rfPath][group];
++			pHalData->TxPwrLegacyHtDiff[rfPath][ch]	= pwrInfo.OFDMIndexDiff[rfPath][group];
++			pHalData->PwrGroupHT20[rfPath][ch]		= pwrInfo.HT20MaxOffset[rfPath][group];
++			pHalData->PwrGroupHT40[rfPath][ch]		= pwrInfo.HT40MaxOffset[rfPath][group];
++
++			pwr		= pwrInfo.HT40_1SIndex[rfPath][group];
++			diff	= pwrInfo.HT40_2SIndexDiff[rfPath][group];
++
++			pHalData->TxPwrLevelHT40_2S[rfPath][ch]  = (pwr > diff) ? (pwr - diff) : 0;
++		}
++	}
++
++#if DBG
++
++	for(rfPath = 0 ; rfPath < RF_PATH_MAX ; rfPath++){
++		for(ch = 0 ; ch < CHANNEL_MAX_NUMBER ; ch++){
++			RTPRINT(FINIT, INIT_TxPower, 
++				("RF(%d)-Ch(%d) [CCK / HT40_1S / HT40_2S] = [0x%x / 0x%x / 0x%x]\n", 
++				rfPath, ch, pHalData->TxPwrLevelCck[rfPath][ch], 
++				pHalData->TxPwrLevelHT40_1S[rfPath][ch], 
++				pHalData->TxPwrLevelHT40_2S[rfPath][ch]));
++
++		}
++	}
++
++	for(ch = 0 ; ch < CHANNEL_MAX_NUMBER ; ch++){
++		RTPRINT(FINIT, INIT_TxPower, ("RF-A Ht20 to HT40 Diff[%d] = 0x%x\n", ch, pHalData->TxPwrHt20Diff[RF_PATH_A][ch]));
++	}
++
++	for(ch = 0 ; ch < CHANNEL_MAX_NUMBER ; ch++){
++		RTPRINT(FINIT, INIT_TxPower, ("RF-A Legacy to Ht40 Diff[%d] = 0x%x\n", ch, pHalData->TxPwrLegacyHtDiff[RF_PATH_A][ch]));
++	}
++	
++	for(ch = 0 ; ch < CHANNEL_MAX_NUMBER ; ch++){
++		RTPRINT(FINIT, INIT_TxPower, ("RF-B Ht20 to HT40 Diff[%d] = 0x%x\n", ch, pHalData->TxPwrHt20Diff[RF_PATH_B][ch]));
++	}
++	
++	for(ch = 0 ; ch < CHANNEL_MAX_NUMBER ; ch++){
++		RTPRINT(FINIT, INIT_TxPower, ("RF-B Legacy to HT40 Diff[%d] = 0x%x\n", ch, pHalData->TxPwrLegacyHtDiff[RF_PATH_B][ch]));
++	}
++	
++#endif
++	// 2010/10/19 MH Add Regulator recognize for CU.
++	if(!AutoLoadFail)
++	{
++		pHalData->EEPROMRegulatory = (PROMContent[RF_OPTION1]&0x7);	//bit0~2
++	}
++	else
++	{
++		pHalData->EEPROMRegulatory = 0;
++	}
++	DBG_8192C("EEPROMRegulatory = 0x%x\n", pHalData->EEPROMRegulatory);
++
++}
++
++
++//-------------------------------------------------------------------
++//
++//	EEPROM/EFUSE Content Parsing
++//
++//-------------------------------------------------------------------
++static void
++_ReadIDs(
++	IN	PADAPTER	Adapter,
++	IN	u8*		PROMContent,
++	IN	BOOLEAN		AutoloadFail
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++
++	if(_FALSE == AutoloadFail){
++		// VID, PID 
++		pHalData->EEPROMVID = le16_to_cpu( *(u16 *)&PROMContent[EEPROM_VID]);
++		pHalData->EEPROMPID = le16_to_cpu( *(u16 *)&PROMContent[EEPROM_PID]);
++		
++		// Customer ID, 0x00 and 0xff are reserved for Realtek. 		
++		pHalData->EEPROMCustomerID = *(u8 *)&PROMContent[EEPROM_CUSTOMER_ID];
++		pHalData->EEPROMSubCustomerID = *(u8 *)&PROMContent[EEPROM_SUBCUSTOMER_ID];
++
++	}
++	else{
++		pHalData->EEPROMVID	 = EEPROM_Default_VID;
++		pHalData->EEPROMPID	 = EEPROM_Default_PID;
++
++		// Customer ID, 0x00 and 0xff are reserved for Realtek. 		
++		pHalData->EEPROMCustomerID	= EEPROM_Default_CustomerID;
++		pHalData->EEPROMSubCustomerID = EEPROM_Default_SubCustomerID;
++
++	}
++
++	// For customized behavior.
++	if((pHalData->EEPROMVID == 0x103C) && (pHalData->EEPROMVID == 0x1629))// HP Lite-On for RTL8188CUS Slim Combo.
++		pHalData->CustomerID = RT_CID_819x_HP;
++
++	//	Decide CustomerID according to VID/DID or EEPROM
++	switch(pHalData->EEPROMCustomerID)
++	{
++		case EEPROM_CID_DEFAULT:
++			if((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x3308))
++				pHalData->CustomerID = RT_CID_DLINK;
++			else if((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x3309))
++				pHalData->CustomerID = RT_CID_DLINK;
++			else if((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x330a))
++				pHalData->CustomerID = RT_CID_DLINK;
++			break;
++		case EEPROM_CID_WHQL:
++/*			
++			Adapter->bInHctTest = TRUE;
++
++			pMgntInfo->bSupportTurboMode = FALSE;
++			pMgntInfo->bAutoTurboBy8186 = FALSE;
++
++			pMgntInfo->PowerSaveControl.bInactivePs = FALSE;
++			pMgntInfo->PowerSaveControl.bIPSModeBackup = FALSE;
++			pMgntInfo->PowerSaveControl.bLeisurePs = FALSE;
++				
++			pMgntInfo->keepAliveLevel = 0;
++
++			Adapter->bUnloadDriverwhenS3S4 = FALSE;
++*/				
++			break;
++		default:
++			pHalData->CustomerID = RT_CID_DEFAULT;
++			break;
++			
++	}
++
++	MSG_8192C("EEPROMVID = 0x%04x\n", pHalData->EEPROMVID);
++	MSG_8192C("EEPROMPID = 0x%04x\n", pHalData->EEPROMPID);
++	MSG_8192C("EEPROMCustomerID : 0x%02x\n", pHalData->EEPROMCustomerID);
++	MSG_8192C("EEPROMSubCustomerID: 0x%02x\n", pHalData->EEPROMSubCustomerID);
++
++	MSG_8192C("RT_CustomerID: 0x%02x\n", pHalData->CustomerID);
++
++}
++
++
++static VOID
++_ReadMACAddress(
++	IN	PADAPTER	Adapter,	
++	IN	u8*		PROMContent,
++	IN	BOOLEAN		AutoloadFail
++	)
++{
++	EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(Adapter);
++
++	if(_FALSE == AutoloadFail){
++		//Read Permanent MAC address and set value to hardware
++		_rtw_memcpy(pEEPROM->mac_addr, &PROMContent[EEPROM_MAC_ADDR], ETH_ALEN);		
++	}
++	else{
++		//Random assigh MAC address
++		u8 sMacAddr[MAC_ADDR_LEN] = {0x00, 0xE0, 0x4C, 0x81, 0x92, 0x00};
++		//sMacAddr[5] = (u8)GetRandomNumber(1, 254);		
++		_rtw_memcpy(pEEPROM->mac_addr, sMacAddr, ETH_ALEN);	
++	}
++	DBG_8192C("%s MAC Address from EFUSE = "MAC_FMT"\n",__FUNCTION__, MAC_ARG(pEEPROM->mac_addr));
++	//NicIFSetMacAddress(Adapter, Adapter->PermanentAddress);
++	//RT_PRINT_ADDR(COMP_INIT|COMP_EFUSE, DBG_LOUD, "MAC Addr: %s", Adapter->PermanentAddress);
++
++}
++
++static VOID
++_ReadBoardType(
++	IN	PADAPTER	Adapter,	
++	IN	u8*		PROMContent,
++	IN	BOOLEAN		AutoloadFail
++	)
++{
++	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(Adapter);
++	u32			value32;
++	u8			boardType = BOARD_USB_DONGLE;
++
++	if(AutoloadFail){
++		if(IS_8723_SERIES(pHalData->VersionID))
++			pHalData->rf_type = RF_1T1R;
++		else
++		        pHalData->rf_type = RF_2T2R;
++
++		pHalData->BluetoothCoexist = _FALSE;
++		pHalData->BoardType = boardType;
++		return;
++	}
++
++	boardType = PROMContent[EEPROM_NORMAL_BoardType];
++	boardType &= BOARD_TYPE_NORMAL_MASK;//bit[7:5]
++	boardType >>= 5;
++
++	pHalData->BoardType = boardType;
++	MSG_8192C("_ReadBoardType(%x)\n",pHalData->BoardType);
++
++	if (boardType == BOARD_USB_High_PA)
++		pHalData->ExternalPA = 1;
++}
++
++
++static VOID
++_ReadLEDSetting(
++	IN	PADAPTER	Adapter,	
++	IN	u8*		PROMContent,
++	IN	BOOLEAN		AutoloadFail
++	)
++{
++	struct led_priv *pledpriv = &(Adapter->ledpriv);
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++#ifdef CONFIG_SW_LED
++	pledpriv->bRegUseLed = _TRUE;
++
++	//
++	// Led mode
++	//
++	switch(pHalData->CustomerID)
++	{
++		case RT_CID_DEFAULT:
++			pledpriv->LedStrategy = SW_LED_MODE1;
++			pledpriv->bRegUseLed = _TRUE;
++			break;
++
++		case RT_CID_819x_HP:
++			pledpriv->LedStrategy = SW_LED_MODE6;
++			break;
++
++		default:
++			pledpriv->LedStrategy = SW_LED_MODE1;
++			break;
++	}
++
++	if( BOARD_MINICARD == pHalData->BoardType )
++	{
++		pledpriv->LedStrategy = SW_LED_MODE6;
++	}
++	pHalData->bLedOpenDrain = _TRUE;// Support Open-drain arrangement for controlling the LED. Added by Roger, 2009.10.16.
++#else // HW LED
++	pledpriv->LedStrategy = HW_LED;
++#endif //CONFIG_SW_LED
++}
++
++static VOID
++_ReadThermalMeter(
++	IN	PADAPTER	Adapter,	
++	IN	u8* 	PROMContent,
++	IN	BOOLEAN 	AutoloadFail
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	u8	tempval;
++
++	//
++	// ThermalMeter from EEPROM
++	//
++	if(!AutoloadFail)	
++		tempval = PROMContent[EEPROM_THERMAL_METER];
++	else
++		tempval = EEPROM_Default_ThermalMeter;
++	
++	pHalData->EEPROMThermalMeter = (tempval&0x1f);	//[4:0]
++
++	if(pHalData->EEPROMThermalMeter == 0x1f || AutoloadFail)
++		pdmpriv->bAPKThermalMeterIgnore = _TRUE;
++
++#if 0
++	if(pHalData->EEPROMThermalMeter < 0x06 || pHalData->EEPROMThermalMeter > 0x1c)
++		pHalData->EEPROMThermalMeter = 0x12;
++#endif
++
++	pdmpriv->ThermalMeter[0] = pHalData->EEPROMThermalMeter;
++	
++	//RTPRINT(FINIT, INIT_TxPower, ("ThermalMeter = 0x%x\n", pHalData->EEPROMThermalMeter));
++	
++}
++
++static VOID
++_ReadRFSetting(
++	IN	PADAPTER	Adapter,	
++	IN	u8* 	PROMContent,
++	IN	BOOLEAN 	AutoloadFail
++	)
++{
++}
++
++static void
++_ReadPROMVersion(
++	IN	PADAPTER	Adapter,	
++	IN	u8* 	PROMContent,
++	IN	BOOLEAN 	AutoloadFail
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++
++	if(AutoloadFail){
++		pHalData->EEPROMVersion = EEPROM_Default_Version;		
++	}
++	else{
++		pHalData->EEPROMVersion = *(u8 *)&PROMContent[EEPROM_VERSION];
++	}
++}
++
++static VOID
++readAntennaDiversity(
++	IN	PADAPTER	pAdapter,
++	IN	u8			*hwinfo,
++	IN	BOOLEAN		AutoLoadFail
++	)
++{
++
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	struct registry_priv	*registry_par = &pAdapter->registrypriv;
++
++	if(!AutoLoadFail)
++	{
++		// Antenna Diversity setting. 
++		if(registry_par->antdiv_cfg == 2) // 2: From Efuse
++			pHalData->AntDivCfg = (hwinfo[EEPROM_RF_OPT1]&0x18)>>3;
++		else
++			pHalData->AntDivCfg = registry_par->antdiv_cfg ;  // 0:OFF , 1:ON,
++
++		DBG_8192C("### AntDivCfg(%x)\n",pHalData->AntDivCfg);	
++
++		//if(pHalData->EEPROMBluetoothCoexist!=0 && pHalData->EEPROMBluetoothAntNum==Ant_x1)
++		//	pHalData->AntDivCfg = 0;
++	}
++	else
++	{
++		pHalData->AntDivCfg = 0;
++	}
++
++}
++
++static VOID
++hal_InitPGData(
++	IN	PADAPTER	pAdapter,
++	IN	OUT	u8		*PROMContent
++	)
++{
++	EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(pAdapter);
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
++	u32	i;
++	u16	value16;
++
++	if(_FALSE == pEEPROM->bautoload_fail_flag)
++	{ // autoload OK.
++		if (_TRUE == pEEPROM->EepromOrEfuse)
++		{
++			// Read all Content from EEPROM or EFUSE.
++			for(i = 0; i < HWSET_MAX_SIZE; i += 2)
++			{
++				//value16 = EF2Byte(ReadEEprom(pAdapter, (u2Byte) (i>>1)));
++				//*((u16 *)(&PROMContent[i])) = value16; 				
++			}
++		}
++		else
++		{
++			// Read EFUSE real map to shadow.
++			EFUSE_ShadowMapUpdate(pAdapter, EFUSE_WIFI, _FALSE);
++			_rtw_memcpy((void*)PROMContent, (void*)pEEPROM->efuse_eeprom_data, HWSET_MAX_SIZE);
++		}
++	}
++	else
++	{//autoload fail
++		//RT_TRACE(COMP_INIT, DBG_LOUD, ("AutoLoad Fail reported from CR9346!!\n")); 
++		pEEPROM->bautoload_fail_flag = _TRUE;
++		//update to default value 0xFF
++		if (_FALSE == pEEPROM->EepromOrEfuse)		
++		EFUSE_ShadowMapUpdate(pAdapter, EFUSE_WIFI, _FALSE);	
++	}
++}
++// Read HW power down mode selection 
++static void _ReadPSSetting(IN PADAPTER Adapter,IN u8*PROMContent,IN u8	AutoloadFail)
++{
++	if(AutoloadFail){
++		Adapter->pwrctrlpriv.bHWPowerdown = _FALSE;
++		Adapter->pwrctrlpriv.bSupportRemoteWakeup = _FALSE;
++	}
++	else	{
++		//if(SUPPORT_HW_RADIO_DETECT(Adapter))
++			Adapter->pwrctrlpriv.bHWPwrPindetect = Adapter->registrypriv.hwpwrp_detect;
++		//else
++			//Adapter->pwrctrlpriv.bHWPwrPindetect = _FALSE;//dongle not support new
++			
++			
++		//hw power down mode selection , 0:rf-off / 1:power down
++
++		if(Adapter->registrypriv.hwpdn_mode==2)
++			Adapter->pwrctrlpriv.bHWPowerdown = (PROMContent[EEPROM_RF_OPT3] & BIT4);
++		else
++			Adapter->pwrctrlpriv.bHWPowerdown = Adapter->registrypriv.hwpdn_mode;
++#ifdef CONFIG_WOWLAN			
++		// decide hw if support remote wakeup function
++		// if hw supported, 8051 (SIE) will generate WeakUP signal( D+/D- toggle) when autoresume
++		Adapter->pwrctrlpriv.bSupportRemoteWakeup = (PROMContent[EEPROM_TEST_USB_OPT] & BIT1)?_TRUE :_FALSE;
++#endif //CONFIG_WOWLAN
++
++		//if(SUPPORT_HW_RADIO_DETECT(Adapter))	
++			//Adapter->registrypriv.usbss_enable = Adapter->pwrctrlpriv.bSupportRemoteWakeup ;
++		
++		DBG_8192C("%s...bHWPwrPindetect(%x)-bHWPowerdown(%x) ,bSupportRemoteWakeup(%x)\n",__FUNCTION__,
++		Adapter->pwrctrlpriv.bHWPwrPindetect,Adapter->pwrctrlpriv.bHWPowerdown ,Adapter->pwrctrlpriv.bSupportRemoteWakeup);
++
++		DBG_8192C("### PS params=>  power_mgnt(%x),usbss_enable(%x) ###\n",Adapter->registrypriv.power_mgnt,Adapter->registrypriv.usbss_enable);
++		
++	}
++	
++}
++
++static VOID
++readAdapterInfo_8192CU(
++	IN	PADAPTER	Adapter
++	)
++{
++	EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(Adapter);
++	PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter);
++	u8	PROMContent[HWSET_MAX_SIZE]={0};
++
++	hal_InitPGData(Adapter, PROMContent);
++	rtl8192c_EfuseParseIDCode(Adapter, PROMContent);
++	
++	_ReadPROMVersion(Adapter, PROMContent, pEEPROM->bautoload_fail_flag);
++	_ReadIDs(Adapter, PROMContent, pEEPROM->bautoload_fail_flag);
++	_ReadMACAddress(Adapter, PROMContent, pEEPROM->bautoload_fail_flag);	
++	ReadTxPowerInfo(Adapter, PROMContent, pEEPROM->bautoload_fail_flag);
++	_ReadBoardType(Adapter, PROMContent, pEEPROM->bautoload_fail_flag);
++
++#ifdef CONFIG_BT_COEXIST
++	//
++	// Read Bluetooth co-exist and initialize
++	//
++	rtl8192c_ReadBluetoothCoexistInfo(Adapter, PROMContent, pEEPROM->bautoload_fail_flag);
++#endif
++	
++	rtl8192c_EfuseParseChnlPlan(Adapter, PROMContent, pEEPROM->bautoload_fail_flag);
++	_ReadThermalMeter(Adapter, PROMContent, pEEPROM->bautoload_fail_flag);
++	_ReadLEDSetting(Adapter, PROMContent, pEEPROM->bautoload_fail_flag);	
++	_ReadRFSetting(Adapter, PROMContent, pEEPROM->bautoload_fail_flag);
++	_ReadPSSetting(Adapter, PROMContent, pEEPROM->bautoload_fail_flag);
++	readAntennaDiversity(Adapter, PROMContent, pEEPROM->bautoload_fail_flag);
++
++	//hal_CustomizedBehavior_8723U(Adapter);
++
++	Adapter->bDongle = (PROMContent[EEPROM_EASY_REPLACEMENT] == 1)? 0: 1;
++	DBG_8192C("%s(): REPLACEMENT = %x\n",__FUNCTION__,Adapter->bDongle);
++#ifdef CONFIG_INTEL_PROXIM	
++		/* for intel proximity */
++	if (pHalData->rf_type== RF_1T1R) {
++		Adapter->proximity.proxim_support = _TRUE;
++	} else if (pHalData->rf_type== RF_2T2R) {
++		if ((pHalData->EEPROMPID == 0x8186) &&
++			(pHalData->EEPROMVID== 0x0bda))
++		Adapter->proximity.proxim_support = _TRUE;
++	} else {
++		Adapter->proximity.proxim_support = _FALSE;
++	}
++#endif //CONFIG_INTEL_PROXIM		
++}
++
++static void _ReadPROMContent(
++	IN PADAPTER 		Adapter
++	)
++{	
++	EEPROM_EFUSE_PRIV *pEEPROM = GET_EEPROM_EFUSE_PRIV(Adapter);
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	u8			PROMContent[HWSET_MAX_SIZE]={0};
++	u8			eeValue;
++	u32			i;
++	u16			value16;
++
++	eeValue = rtw_read8(Adapter, REG_9346CR);
++	// To check system boot selection.
++	pEEPROM->EepromOrEfuse		= (eeValue & BOOT_FROM_EEPROM) ? _TRUE : _FALSE;
++	pEEPROM->bautoload_fail_flag	= (eeValue & EEPROM_EN) ? _FALSE : _TRUE;
++
++
++	DBG_8192C("Boot from %s, Autoload %s !\n", (pEEPROM->EepromOrEfuse ? "EEPROM" : "EFUSE"),
++				(pEEPROM->bautoload_fail_flag ? "Fail" : "OK") );
++
++	//pHalData->EEType = IS_BOOT_FROM_EEPROM(Adapter) ? EEPROM_93C46 : EEPROM_BOOT_EFUSE;
++
++	//if(IS_HARDWARE_TYPE_8723A(Adapter))
++	//	readAdapterInfo_8723U(Adapter);
++	//else
++		readAdapterInfo_8192CU(Adapter);
++}
++
++
++static VOID
++_InitOtherVariable(
++	IN PADAPTER 		Adapter
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);	
++
++
++	//if(Adapter->bInHctTest){
++	//	pMgntInfo->PowerSaveControl.bInactivePs = FALSE;
++	//	pMgntInfo->PowerSaveControl.bIPSModeBackup = FALSE;
++	//	pMgntInfo->PowerSaveControl.bLeisurePs = FALSE;
++	//	pMgntInfo->keepAliveLevel = 0;
++	//}
++
++	// 2009/06/10 MH For 92S 1*1=1R/ 1*2&2*2 use 2R. We default set 1*1 use radio A
++	// So if you want to use radio B. Please modify RF path enable bit for correct signal
++	// strength calculate.
++	if (pHalData->rf_type == RF_1T1R){
++		pHalData->bRFPathRxEnable[0] = _TRUE;
++	}
++	else{
++		pHalData->bRFPathRxEnable[0] = pHalData->bRFPathRxEnable[1] = _TRUE;
++	}
++
++}
++
++static VOID
++_ReadRFType(
++	IN	PADAPTER	Adapter
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++
++#if DISABLE_BB_RF
++	pHalData->rf_chip = RF_PSEUDO_11N;
++#else
++	pHalData->rf_chip = RF_6052;
++#endif
++}
++
++void _ReadSilmComboMode(PADAPTER Adapter)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++
++	pHalData->SlimComboDbg = _FALSE;	// Default is not debug mode.
++
++	// 2010/11/22 MH We need to enter debug mode for TSMA and UMC A cut
++	if ((Adapter->chip_type == RTL8188C_8192C) && 
++		(pHalData->BoardType == BOARD_USB_COMBO))
++	{			
++		switch (pHalData->VersionID)
++		{
++			case	VERSION_NORMAL_TSMC_CHIP_88C:
++			case	VERSION_NORMAL_TSMC_CHIP_92C:
++			case	VERSION_NORMAL_TSMC_CHIP_92C_1T2R:
++			case	VERSION_NORMAL_UMC_CHIP_88C_A_CUT:
++			case	VERSION_NORMAL_UMC_CHIP_92C_A_CUT:
++			case	VERSION_NORMAL_UMC_CHIP_92C_1T2R_A_CUT:
++				if ((rtw_read8(Adapter, REG_SYS_CFG+3) &0xF0) == 0x20)
++					pHalData->SlimComboDbg = _TRUE;
++				
++				break;
++
++			case	VERSION_NORMAL_UMC_CHIP_88C_B_CUT:
++			case	VERSION_NORMAL_UMC_CHIP_92C_B_CUT:
++			case	VERSION_NORMAL_UMC_CHIP_92C_1T2R_B_CUT:
++				// 2011/02/15 MH UNC-B cut ECO fail, we need to support slim combo debug mode.
++				if ((rtw_read8(Adapter, REG_SYS_CFG+3) &0xF0) == 0x20)
++					pHalData->SlimComboDbg = _TRUE;
++				break;
++				
++			default:
++				break;
++		}		
++		
++	}
++	
++}
++static int _ReadAdapterInfo8192CU(PADAPTER	Adapter)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	u32 start=rtw_get_current_time();
++	
++	MSG_8192C("====> ReadAdapterInfo8192C\n");
++
++	//Efuse_InitSomeVar(Adapter);
++
++	//if(IS_HARDWARE_TYPE_8723A(Adapter))
++	//	_EfuseCellSel(Adapter);
++
++	_ReadRFType(Adapter);//rf_chip -> _InitRFType()
++	_ReadPROMContent(Adapter);
++
++	// 2010/10/25 MH THe function must be called after borad_type & IC-Version recognize.
++	_ReadSilmComboMode(Adapter);
++
++	_InitOtherVariable(Adapter);
++
++	//MSG_8192C("%s()(done), rf_chip=0x%x, rf_type=0x%x\n",  __FUNCTION__, pHalData->rf_chip, pHalData->rf_type);
++
++	MSG_8192C("<==== ReadAdapterInfo8192C in %d ms\n", rtw_get_passing_time_ms(start));
++
++	return _SUCCESS;
++}
++
++
++static void ReadAdapterInfo8192CU(PADAPTER Adapter)
++{
++	// Read EEPROM size before call any EEPROM function
++	//Adapter->EepromAddressSize=Adapter->HalFunc.GetEEPROMSizeHandler(Adapter);
++	Adapter->EepromAddressSize = GetEEPROMSize8192C(Adapter);
++	
++	_ReadAdapterInfo8192CU(Adapter);
++}
++
++
++#define GPIO_DEBUG_PORT_NUM 0
++static void rtl8192cu_trigger_gpio_0(_adapter *padapter)
++{
++
++	u32 gpioctrl;
++	DBG_8192C("==> trigger_gpio_0...\n");
++	rtw_write16_async(padapter,REG_GPIO_PIN_CTRL,0);
++	rtw_write8_async(padapter,REG_GPIO_PIN_CTRL+2,0xFF);
++	gpioctrl = (BIT(GPIO_DEBUG_PORT_NUM)<<24 )|(BIT(GPIO_DEBUG_PORT_NUM)<<16);
++	rtw_write32_async(padapter,REG_GPIO_PIN_CTRL,gpioctrl);
++	gpioctrl |= (BIT(GPIO_DEBUG_PORT_NUM)<<8);
++	rtw_write32_async(padapter,REG_GPIO_PIN_CTRL,gpioctrl);
++	DBG_8192C("<=== trigger_gpio_0...\n");
++
++}
++
++static void ResumeTxBeacon(_adapter *padapter)
++{
++	HAL_DATA_TYPE*	pHalData = GET_HAL_DATA(padapter);	
++
++	// 2010.03.01. Marked by tynli. No need to call workitem beacause we record the value
++	// which should be read from register to a global variable.
++
++	rtw_write8(padapter, REG_FWHW_TXQ_CTRL+2, (pHalData->RegFwHwTxQCtrl) | BIT6);
++	pHalData->RegFwHwTxQCtrl |= BIT6;	 
++}
++
++static void StopTxBeacon(_adapter *padapter)
++{
++	HAL_DATA_TYPE*	pHalData = GET_HAL_DATA(padapter);
++
++	// 2010.03.01. Marked by tynli. No need to call workitem beacause we record the value
++	// which should be read from register to a global variable.
++
++	rtw_write8(padapter, REG_FWHW_TXQ_CTRL+2, (pHalData->RegFwHwTxQCtrl) & (~BIT6));
++	pHalData->RegFwHwTxQCtrl &= (~BIT6);
++
++	 //todo: CheckFwRsvdPageContent(Adapter);  // 2010.06.23. Added by tynli.
++
++}
++
++u16 CRC16(u8 data,u16 CRC)
++{
++	unsigned char shift_in,CRC_BIT15,DataBit,CRC_BIT11,CRC_BIT4 ;
++	int index;
++	unsigned short CRC_Result;
++
++	for(index=0;index<8;index++)
++	{
++		CRC_BIT15=((CRC&BIT15) ? 1:0);
++		DataBit  =(data&(BIT0<<index) ? 1:0);
++		shift_in=CRC_BIT15^DataBit;
++		//printf("CRC_BIT15=%d, DataBit=%d, shift_in=%d \n",CRC_BIT15,DataBit,shift_in);
++		
++		CRC_Result=CRC<<1;
++		//set BIT0 
++		//	printf("CRC =%x\n",CRC_Result);
++		//CRC bit 0 =shift_in,
++		if(shift_in==0)
++		{
++			CRC_Result&=(~BIT0); 
++		}
++		else
++		{
++			CRC_Result|=BIT0;
++		}
++		//printf("CRC =%x\n",CRC_Result);
++
++		CRC_BIT11 = ((CRC&BIT11) ? 1:0)^shift_in;
++		if(CRC_BIT11==0)
++		{
++			CRC_Result&=(~BIT12); 
++		}
++		else
++		{
++			CRC_Result|=BIT12;
++		}
++		//printf("bit12 CRC =%x\n",CRC_Result);
++
++		CRC_BIT4 = ((CRC&BIT4) ? 1:0)^shift_in;
++		if(CRC_BIT4==0)
++		{
++			CRC_Result&=(~BIT5); 
++		}
++		else
++		{
++			CRC_Result|=BIT5;
++		}
++		//printf("bit5 CRC =%x\n",CRC_Result);
++
++		CRC=CRC_Result; //­«½Æ¨Ï¥Î¤W¤@¦¸ªºµ²ªG
++	}
++
++	return CRC;
++	
++}
++
++
++/////////////////////////////////////////////////
++//
++//function name :calc_crc
++//
++//input         : char* pattern , pattern size
++//
++//////////////////////////////////////////////////
++u16 calc_crc(u8 * pdata,int length)
++{
++//    unsigned char data[2]={0xC6,0xAA};
++	u16 CRC=0xffff;
++	int i;
++	
++	for(i=0;i<length;i++)
++	{
++		CRC=CRC16(pdata[i],CRC);
++	}
++
++	CRC=~CRC;                  //¨ú¸É¼Æ
++	printk("CRC =%x\n",CRC);
++	return CRC;
++}
++
++static void hw_var_set_opmode(PADAPTER Adapter, u8 variable, u8* val)
++{
++	u8	val8;
++	u8	mode = *((u8 *)val);
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if(Adapter->iface_type == IFACE_PORT1)
++	{
++		// disable Port1 TSF update
++		rtw_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1)|BIT(4));
++		
++		// set net_type
++		val8 = rtw_read8(Adapter, MSR)&0x03;
++		val8 |= (mode<<2);
++		rtw_write8(Adapter, MSR, val8);
++		
++		//reset TSF1	
++		rtw_write8(Adapter, REG_DUAL_TSF_RST, BIT(1));
++		
++		DBG_871X("%s()-%d mode = %d\n", __FUNCTION__, __LINE__, mode);
++	
++		if((mode == _HW_STATE_STATION_) || (mode == _HW_STATE_NOLINK_))
++		{
++			if(!check_buddy_mlmeinfo_state(Adapter, WIFI_FW_AP_STATE))			
++			{
++				StopTxBeacon(Adapter);
++			}
++			
++			rtw_write8(Adapter,REG_BCN_CTRL_1, 0x19);//disable atim wnd
++			//rtw_write8(Adapter,REG_BCN_CTRL_1, 0x18);
++		}
++		else if((mode == _HW_STATE_ADHOC_) /*|| (mode == _HW_STATE_AP_)*/)
++		{
++			ResumeTxBeacon(Adapter);
++			rtw_write8(Adapter,REG_BCN_CTRL_1, 0x1a);
++		}
++		else if(mode == _HW_STATE_AP_)
++		{
++			ResumeTxBeacon(Adapter);
++					
++			rtw_write8(Adapter, REG_BCN_CTRL_1, 0x12);
++					
++			//Set RCR
++			//rtw_write32(padapter, REG_RCR, 0x70002a8e);//CBSSID_DATA must set to 0
++			rtw_write32(Adapter, REG_RCR, 0x7000228e);//CBSSID_DATA must set to 0
++			//enable to rx data frame				
++			rtw_write16(Adapter, REG_RXFLTMAP2, 0xFFFF);
++			//enable to rx ps-poll
++			rtw_write16(Adapter, REG_RXFLTMAP1, 0x0400);
++
++			//Beacon Control related register for first time 
++			rtw_write8(Adapter, REG_BCNDMATIM, 0x02); // 2ms		
++			rtw_write8(Adapter, REG_DRVERLYINT, 0x05);// 5ms
++			//rtw_write8(Adapter, REG_BCN_MAX_ERR, 0xFF);
++			rtw_write8(Adapter, REG_ATIMWND_1, 0x0a); // 10ms for port1
++			rtw_write16(Adapter, REG_BCNTCFG, 0x00);
++			rtw_write16(Adapter, REG_TBTT_PROHIBIT, 0xff04);
++			rtw_write16(Adapter, REG_TSFTR_SYN_OFFSET, 0x7fff);// +32767 (~32ms)
++	
++
++		       	//enable BCN1 Function for if2
++			//don't enable update TSF1 for if2 (due to TSF update when beacon/probe rsp are received)
++			rtw_write8(Adapter, REG_BCN_CTRL_1, (DIS_TSF_UDT0_NORMAL_CHIP|EN_BCN_FUNCTION | EN_TXBCN_RPT|BIT(1)));
++
++#ifdef CONFIG_CONCURRENT_MODE
++			if(check_buddy_fwstate(Adapter, WIFI_FW_NULL_STATE))
++				rtw_write8(Adapter, REG_BCN_CTRL, 
++					rtw_read8(Adapter, REG_BCN_CTRL) & ~EN_BCN_FUNCTION);
++#endif
++
++			DBG_871X("%s()-%d: REG_BCN_CTRL_1 = %02x\n", __FUNCTION__, __LINE__, rtw_read8(Adapter, REG_BCN_CTRL_1));
++			
++                        //BCN1 TSF will sync to BCN0 TSF with offset(0x518) if if1_sta linked
++			//rtw_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1)|BIT(5));
++			//rtw_write8(Adapter, REG_DUAL_TSF_RST, BIT(3));
++					
++			//dis BCN0 ATIM  WND if if1 is station
++			rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(0));
++#ifdef CONFIG_TSF_RESET_OFFLOAD
++			// Reset TSF for STA+AP concurrent mode
++			if ( check_buddy_fwstate(Adapter, (WIFI_STATION_STATE|WIFI_ASOC_STATE)) ) {
++				if (reset_tsf(Adapter, IFACE_PORT1) == _FALSE)
++					DBG_871X("ERROR! %s()-%d: Reset port1 TSF fail\n",
++						__FUNCTION__, __LINE__);
++			}
++#endif	// CONFIG_TSF_RESET_OFFLOAD
++		}
++
++	}
++	else	// (Adapter->iface_type == IFACE_PORT1)
++#endif //CONFIG_CONCURRENT_MODE
++	{
++		// disable Port0 TSF update
++		rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(4));
++		
++		// set net_type
++		val8 = rtw_read8(Adapter, MSR)&0x0c;
++		val8 |= mode;
++		rtw_write8(Adapter, MSR, val8);
++		
++		//reset TSF0	
++		rtw_write8(Adapter, REG_DUAL_TSF_RST, BIT(0));
++
++		DBG_871X("%s()-%d mode = %d\n", __FUNCTION__, __LINE__, mode);
++		
++		if((mode == _HW_STATE_STATION_) || (mode == _HW_STATE_NOLINK_))
++		{
++#ifdef CONFIG_CONCURRENT_MODE
++			if(!check_buddy_mlmeinfo_state(Adapter, WIFI_FW_AP_STATE))		
++#endif //CONFIG_CONCURRENT_MODE
++			{
++				StopTxBeacon(Adapter);
++			}
++			
++			rtw_write8(Adapter,REG_BCN_CTRL, 0x19);//disable atim wnd
++			//rtw_write8(Adapter,REG_BCN_CTRL, 0x18);
++		}		
++		else if((mode == _HW_STATE_ADHOC_) /*|| (mode == _HW_STATE_AP_)*/)
++		{
++			ResumeTxBeacon(Adapter);
++			rtw_write8(Adapter,REG_BCN_CTRL, 0x1a);
++		}
++		else if(mode == _HW_STATE_AP_)
++		{
++			ResumeTxBeacon(Adapter);
++					
++			rtw_write8(Adapter, REG_BCN_CTRL, 0x12);
++					
++			//Set RCR
++			//write32(padapter, REG_RCR, 0x70002a8e);//CBSSID_DATA must set to 0
++			rtw_write32(Adapter, REG_RCR, 0x7000228e);//CBSSID_DATA must set to 0
++			//enable to rx data frame				
++			rtw_write16(Adapter, REG_RXFLTMAP2, 0xFFFF);
++			//enable to rx ps-poll
++			rtw_write16(Adapter, REG_RXFLTMAP1, 0x0400);
++
++			//Beacon Control related register for first time 
++
++			rtw_write8(Adapter, REG_BCNDMATIM, 0x02); // 2ms		
++			rtw_write8(Adapter, REG_DRVERLYINT, 0x05);// 5ms
++
++			//write8(Adapter, REG_BCN_MAX_ERR, 0xFF);
++			rtw_write8(Adapter, REG_ATIMWND, 0x0a); // 10ms for port0
++			rtw_write16(Adapter, REG_BCNTCFG, 0x00);
++			rtw_write16(Adapter, REG_TBTT_PROHIBIT, 0xff04);
++			rtw_write16(Adapter, REG_TSFTR_SYN_OFFSET, 0x7fff);// +32767 (~32ms)
++	
++		        //enable BCN0 Function for if1
++			//don't enable update TSF0 for if1 (due to TSF update when beacon/probe rsp are received)
++			rtw_write8(Adapter, REG_BCN_CTRL, (DIS_TSF_UDT0_NORMAL_CHIP|EN_BCN_FUNCTION | EN_TXBCN_RPT|BIT(1)));
++					
++#ifdef CONFIG_CONCURRENT_MODE
++			if(check_buddy_fwstate(Adapter, WIFI_FW_NULL_STATE))
++				rtw_write8(Adapter, REG_BCN_CTRL_1, 
++					rtw_read8(Adapter, REG_BCN_CTRL_1) & ~EN_BCN_FUNCTION);
++#endif
++			//BCN1 TSF will sync to BCN0 TSF with offset(0x518) if if1_sta linked
++			//only interface 2 as AP MODE need to sync
++			//rtw_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1)|BIT(5));
++			
++							
++			//dis BCN1 ATIM  WND if if2 is station
++			rtw_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1)|BIT(0));
++#ifdef CONFIG_TSF_RESET_OFFLOAD
++			// Reset TSF for STA+AP concurrent mode
++			if ( check_buddy_fwstate(Adapter, (WIFI_STATION_STATE|WIFI_ASOC_STATE)) ) {
++				if (reset_tsf(Adapter, IFACE_PORT0) == _FALSE)
++					DBG_871X("ERROR! %s()-%d: Reset port0 TSF fail\n",
++						__FUNCTION__, __LINE__);
++			}
++#endif	// CONFIG_TSF_RESET_OFFLOAD			
++					
++		}
++
++
++	}
++
++}
++
++static void hw_var_set_macaddr(PADAPTER Adapter, u8 variable, u8* val)
++{
++	u8 idx = 0;
++	u32 reg_macid;
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if(Adapter->iface_type == IFACE_PORT1)
++	{
++		reg_macid = REG_MACID1;
++	}
++	else
++#endif
++	{
++		reg_macid = REG_MACID;
++	}
++
++	for(idx = 0 ; idx < 6; idx++)
++	{
++		rtw_write8(Adapter, (reg_macid+idx), val[idx]);
++	}
++	
++}
++
++static void hw_var_set_bssid(PADAPTER Adapter, u8 variable, u8* val)
++{
++	u8	idx = 0;
++	u32 reg_bssid;
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if(Adapter->iface_type == IFACE_PORT1)
++	{
++		reg_bssid = REG_BSSID1;
++	}
++	else
++#endif
++	{
++		reg_bssid = REG_BSSID;
++	}
++
++	for(idx = 0 ; idx < 6; idx++)
++	{
++		rtw_write8(Adapter, (reg_bssid+idx), val[idx]);
++	}
++
++}
++
++static void hw_var_set_bcn_func(PADAPTER Adapter, u8 variable, u8* val)
++{
++	u32 bcn_ctrl_reg;
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if(Adapter->iface_type == IFACE_PORT1)
++	{
++		bcn_ctrl_reg = REG_BCN_CTRL_1;
++
++		if(*((u8 *)val))
++		{
++			rtw_write8(Adapter, bcn_ctrl_reg, (EN_BCN_FUNCTION | EN_TXBCN_RPT));
++		}
++		else
++		{
++			rtw_write8(Adapter, bcn_ctrl_reg, rtw_read8(Adapter, bcn_ctrl_reg)&(~(EN_BCN_FUNCTION | EN_TXBCN_RPT)));
++		}
++	}	
++	else
++#endif		
++	{		
++		bcn_ctrl_reg = REG_BCN_CTRL;
++		if(*((u8 *)val))
++		{
++			rtw_write8(Adapter, bcn_ctrl_reg, (EN_BCN_FUNCTION | EN_TXBCN_RPT));
++		}
++		else
++		{
++			//rtw_write8(Adapter, bcn_ctrl_reg, rtw_read8(Adapter, bcn_ctrl_reg)&(~(EN_BCN_FUNCTION | EN_TXBCN_RPT)));
++			rtw_write8(Adapter, bcn_ctrl_reg, (rtw_read8(Adapter, bcn_ctrl_reg)&(~(EN_TXBCN_RPT))) | DIS_TSF_UDT0_NORMAL_CHIP);
++		}
++	}
++	
++
++}
++
++#ifdef CONFIG_WOWLAN
++static int rtw_wowlan_set_pattern(_adapter *padapter ,u8* pbuf){
++	struct pwrctrl_priv *pwrpriv=&padapter->pwrctrlpriv;
++	int res=0,crc_idx;
++	u32 content=0,cmd=0;
++	u32 *pdata;
++	u8 config,crc,mc,bc,uc,idx,pattern_len,packet[200],packet_len,valid;
++	u16 crc_val=0,i;
++
++	config=pbuf[0];
++	bc=config & BIT(3)?1:0;
++	mc=config & BIT(4)?1:0;
++	uc=config & BIT(5)?1:0;
++	idx=config & 0x7;
++	crc=config & BIT(6)?1:0;
++	valid=config & BIT(7)?1:0;
++	pattern_len=pbuf[1];
++	packet_len=pattern_len*8;
++	pdata=(u32 *)pbuf;
++
++	// Write to the Wakeup CAM
++	//offset 0
++	if(pattern_len>=4){
++		content=pdata[1];
++	}
++	else{	
++		content=0;
++	}
++	DBG_8192C("\nrtw_wowlan_set_pattern offset[0]  content  0x%x  [cpu_to_le32  0x%x]\n", content,__cpu_to_le32(content));
++	//rtw_write32(padapter, REG_WKFMCAM_RWD, __cpu_to_le32(content));
++	pwrpriv->wowlan_pattern_context[idx][0]= __cpu_to_le32(content);
++	//cmd=BIT(31)|BIT(16)|(idx+0);
++	//rtw_write32(padapter, REG_WKFMCAM_CMD, cmd);
++	//offset 4
++	if(pattern_len>=8){
++		content=pdata[2];
++	}
++	else{	
++		content=0;
++	}
++	DBG_8192C("rtw_wowlan_set_pattern offset[4]  content  0x%x  [cpu_to_le32  0x%x]\n", content,__cpu_to_le32(content));
++	//rtw_write32(padapter, REG_WKFMCAM_RWD, __cpu_to_le32(content));
++	pwrpriv->wowlan_pattern_context[idx][1]= __cpu_to_le32(content);
++
++	//cmd=BIT(31)|BIT(16)|(idx+1);
++	//rtw_write32(padapter, REG_WKFMCAM_CMD, cmd);
++	//offset 8
++	if(pattern_len>=12){
++		content=pdata[3];
++	}
++	else{	
++		content=0;
++	}
++	DBG_8192C("rtw_wowlan_set_pattern offset[8]  content  0x%x  [cpu_to_le32  0x%x]\n", content,__cpu_to_le32(content));
++	//rtw_write32(padapter, REG_WKFMCAM_RWD, __cpu_to_le32(content));
++	pwrpriv->wowlan_pattern_context[idx][2]= __cpu_to_le32(content);
++	//cmd=BIT(31)|BIT(16)|(idx+2);
++	//rtw_write32(padapter, REG_WKFMCAM_CMD, cmd);
++	//offset 12
++	if(pattern_len>=16){
++		content=pdata[4];
++	}
++	else{	
++		content=0;
++	}
++	DBG_8192C("rtw_wowlan_set_pattern offset[12]  content  0x%x  [cpu_to_le32  0x%x]\n", content,__cpu_to_le32(content));
++	//rtw_write32(padapter, REG_WKFMCAM_RWD, __cpu_to_le32(content));
++	pwrpriv->wowlan_pattern_context[idx][3]= __cpu_to_le32(content);
++	//cmd=BIT(31)|BIT(16)|(idx+3);
++	//rtw_write32(padapter, REG_WKFMCAM_CMD, cmd);
++
++	if(crc){
++		// Have the CRC value
++		crc_val=*(u16 *)(&pbuf[2]);
++		DBG_8192C("rtw_wowlan_set_pattern crc_val  0x%x  \n", crc_val);
++		crc_val=__cpu_to_le16(crc_val);
++		DBG_8192C("rtw_wowlan_set_pattern crc_val  after 0x%x  \n", crc_val);
++	}
++	else{
++		DBG_8192C("+rtw_wowlan_set_pattern   crc=0[%x]  Should calculate the CRC\n", crc);
++		// calculate the CRC the write to the Wakeup CAM
++		crc_idx=0;
++		for(i=0;i<packet_len;i++){
++			if(pbuf[4+(i/8)]&(0x01<<(i%8)))
++			{
++				packet[crc_idx++]=pbuf[20+i];
++		//		printk("\n i=%d packet[i]=%x pbuf[20+i(%d)]=%x \n",i,packet[i],20+i,pbuf[20+i]);
++			}
++		}
++		crc_val=calc_crc(packet, crc_idx);
++		printk("+rtw_wowlan_set_pattern   crc_val=0x%.8x \n", crc_val);
++
++	}
++
++	//offset 16
++	content=(valid<<31)| (bc<<26)|(mc<<25)|(uc<<24) |crc_val;
++	printk("rtw_wowlan_set_pattern offset[16]  content  0x%x \n", content);
++	rtw_write32(padapter, REG_WKFMCAM_RWD,content);
++	pwrpriv->wowlan_pattern_context[idx][4]= content;
++	//cmd=BIT(31)|BIT(16)|(idx+4);
++	//rtw_write32(padapter, REG_WKFMCAM_CMD, cmd);
++	pwrpriv->wowlan_pattern_idx|=BIT(idx);
++	
++_rtw_wowlan_set_pattern_exit:
++	return res;
++}
++
++
++
++void rtw_wowlan_reload_pattern(_adapter *padapter){
++	struct pwrctrl_priv *pwrpriv=&padapter->pwrctrlpriv;
++	u32 content=0,cmd=0;
++	u8 idx;
++
++	for (idx=0;idx<8;idx ++){
++		if(pwrpriv->wowlan_pattern_idx & BIT(idx)){
++			//offset 0
++			rtw_write32(padapter, REG_WKFMCAM_RWD, pwrpriv->wowlan_pattern_context[idx][0]);
++			cmd=BIT(31)|BIT(16)|(idx+0);
++			rtw_write32(padapter, REG_WKFMCAM_CMD, cmd);
++
++			//offset 4
++			rtw_write32(padapter, REG_WKFMCAM_RWD, pwrpriv->wowlan_pattern_context[idx][1]);
++			cmd=BIT(31)|BIT(16)|(idx+1);
++			rtw_write32(padapter, REG_WKFMCAM_CMD, cmd);
++
++			//offset 8
++			rtw_write32(padapter, REG_WKFMCAM_RWD, pwrpriv->wowlan_pattern_context[idx][2]);
++			cmd=BIT(31)|BIT(16)|(idx+2);
++			rtw_write32(padapter, REG_WKFMCAM_CMD, cmd);
++
++			//offset 12
++			rtw_write32(padapter, REG_WKFMCAM_RWD, pwrpriv->wowlan_pattern_context[idx][3]);
++			cmd=BIT(31)|BIT(16)|(idx+3);
++			rtw_write32(padapter, REG_WKFMCAM_CMD, cmd);
++
++			//offset 16
++			rtw_write32(padapter, REG_WKFMCAM_RWD, pwrpriv->wowlan_pattern_context[idx][4]);
++			cmd=BIT(31)|BIT(16)|(idx+4);
++			rtw_write32(padapter, REG_WKFMCAM_CMD, cmd);
++
++		}
++		printk("print WOWCAM  idx =%d\n",idx);
++		cmd=BIT(31)|(idx+0);
++		rtw_write32(padapter, REG_WKFMCAM_CMD, cmd);
++		printk("print WOWCAM  offset[0]  =%x\n",rtw_read32(padapter, REG_WKFMCAM_RWD));
++		cmd=BIT(31)|(idx+1);
++		rtw_write32(padapter, REG_WKFMCAM_CMD, cmd);
++		printk("print WOWCAM  offset[1]  =%x\n",rtw_read32(padapter, REG_WKFMCAM_RWD));
++		cmd=BIT(31)|(idx+2);
++		rtw_write32(padapter, REG_WKFMCAM_CMD, cmd);
++		printk("print WOWCAM  offset[2]  =%x\n",rtw_read32(padapter, REG_WKFMCAM_RWD));
++		cmd=BIT(31)|(idx+3);
++		rtw_write32(padapter, REG_WKFMCAM_CMD, cmd);
++		printk("print WOWCAM  offset[3]  =%x\n",rtw_read32(padapter, REG_WKFMCAM_RWD));		
++		cmd=BIT(31)|(idx+4);
++		rtw_write32(padapter, REG_WKFMCAM_CMD, cmd);
++		printk("print WOWCAM  offset[4]  =%x\n",rtw_read32(padapter, REG_WKFMCAM_RWD));
++
++
++	}
++}
++#endif //CONFIG_WOWLAN
++
++static void hw_var_set_correct_tsf(PADAPTER Adapter, u8 variable, u8* val)
++{
++#ifdef CONFIG_CONCURRENT_MODE
++	u64	tsf;
++	struct mlme_ext_priv	*pmlmeext = &Adapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	//tsf = pmlmeext->TSFValue - ((u32)pmlmeext->TSFValue % (pmlmeinfo->bcn_interval*1024)) -1024; //us
++	tsf = pmlmeext->TSFValue - rtw_modular64(pmlmeext->TSFValue, (pmlmeinfo->bcn_interval*1024)) -1024; //us
++
++	if(((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) || ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE))
++	{				
++		//pHalData->RegTxPause |= STOP_BCNQ;BIT(6)
++		//rtw_write8(Adapter, REG_TXPAUSE, (rtw_read8(Adapter, REG_TXPAUSE)|BIT(6)));
++		StopTxBeacon(Adapter);
++	}
++
++	if(Adapter->iface_type == IFACE_PORT1)
++	{
++		//disable related TSF function
++		rtw_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1)&(~BIT(3)));
++							
++		rtw_write32(Adapter, REG_TSFTR1, tsf);
++		rtw_write32(Adapter, REG_TSFTR1+4, tsf>>32);
++
++		//enable related TSF function
++		rtw_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1)|BIT(3));
++
++
++#ifdef CONFIG_TSF_RESET_OFFLOAD
++		// Update buddy port's TSF(TBTT) if it is SoftAP for beacon TX issue!
++		if ( (pmlmeinfo->state&0x03) == WIFI_FW_STATION_STATE
++			&& check_buddy_fwstate(Adapter, WIFI_AP_STATE) ) { 
++			if (reset_tsf(Adapter, IFACE_PORT0) == _FALSE)
++				DBG_871X("ERROR! %s()-%d: Reset port0 TSF fail\n",
++					__FUNCTION__, __LINE__);
++		}
++#endif	// CONFIG_TSF_RESET_OFFLOAD
++
++	}
++	else	// Adapter->iface_type == IFACE_PORT1
++	{
++		//disable related TSF function
++		rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(3)));
++		// disable TSF update instead! May induce burst beacon TX
++		//rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(4));
++							
++		rtw_write32(Adapter, REG_TSFTR, tsf);
++		rtw_write32(Adapter, REG_TSFTR+4, tsf>>32);
++
++		//enable related TSF function
++		rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(3));
++		//rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(4)));		
++		
++		// Update buddy port's TSF if it is SoftAP for beacon TX issue!
++		if ( (pmlmeinfo->state&0x03) == WIFI_FW_STATION_STATE
++			&& check_buddy_fwstate(Adapter, WIFI_AP_STATE)
++		) { 
++			//disable related TSF function
++			rtw_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1)&(~BIT(3)));
++			// disable TSF update instead!
++			//rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL_1)|BIT(4));
++
++			rtw_write32(Adapter, REG_TSFTR1, tsf);
++			rtw_write32(Adapter, REG_TSFTR1+4, tsf>>32);
++
++			//enable related TSF function
++			rtw_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1)|BIT(3));
++			//rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL_1)&(~BIT(4)));
++		}		
++#ifdef CONFIG_TSF_RESET_OFFLOAD
++		// Update buddy port's TSF if it is SoftAP for beacon TX issue!
++		if ( (pmlmeinfo->state&0x03) == WIFI_FW_STATION_STATE
++			&& check_buddy_fwstate(Adapter, WIFI_AP_STATE) ) {
++			if (reset_tsf(Adapter, IFACE_PORT1) == _FALSE)
++				DBG_871X("ERROR! %s()-%d: Reset port1 TSF fail\n",
++					__FUNCTION__, __LINE__);
++		}
++#endif	// CONFIG_TSF_RESET_OFFLOAD
++	}
++
++	if(((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) || ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE))
++	{
++		//pHalData->RegTxPause  &= (~STOP_BCNQ);
++		//rtw_write8(Adapter, REG_TXPAUSE, (rtw_read8(Adapter, REG_TXPAUSE)&(~BIT(6))));
++		ResumeTxBeacon(Adapter);
++	}
++#endif	// CONFIG_CONCURRENT_MODE
++}
++
++static void hw_var_set_mlme_disconnect(PADAPTER Adapter, u8 variable, u8* val)
++{
++#ifdef CONFIG_CONCURRENT_MODE
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	PADAPTER pbuddy_adapter = Adapter->pbuddy_adapter;
++
++				
++	if(check_buddy_mlmeinfo_state(Adapter, _HW_STATE_NOLINK_))	
++		rtw_write16(Adapter, REG_RXFLTMAP2, 0x00);
++	
++
++	if(Adapter->iface_type == IFACE_PORT1)
++	{
++		int i;
++		u8 reg_bcn_ctrl_1;
++
++	   	// a.Driver set 0x422 bit 6 =0
++		rtw_write8(Adapter, REG_FWHW_TXQ_CTRL+2, (pHalData->RegFwHwTxQCtrl) & (~BIT6));
++		pHalData->RegFwHwTxQCtrl &= (~BIT6);
++
++
++#ifdef CONFIG_BEACON_DISABLE_OFFLOAD
++		u8 reg_bcn_disable_cnt = rtw_read8(Adapter, REG_FW_BCN_DIS_CNT);
++		DBG_871X("%s()-%d: reg_bcn_disable_cnt=%02x\n", __FUNCTION__, __LINE__, reg_bcn_disable_cnt);
++	   	
++		reg_bcn_ctrl_1 = rtw_read8(Adapter, REG_BCN_CTRL_1); 
++		DBG_871X("%s()-%d: reg_bcn_ctrl_1=%02x\n", __FUNCTION__, __LINE__, reg_bcn_ctrl_1);
++
++	   	// b. driver set h2c cmd
++	   	rtl8192c_dis_beacon_fun_cmd(Adapter);	   
++	 
++		/*
++			// FW Job for port 0
++			
++		   c. 8051 set nettype to ap
++		   d. 8051 check dma_int
++		   e. 8051 set nettype to no_link
++		   f.8051 dis_tsf_update   0x550 bit 4
++		   g.8051 reset  beacon function test count   0x553 bit0.
++		   h.8051 disable beacon function   0x550  bit3
++		   i. 8051 sent ready to driver
++
++	 	*/
++	 	
++	 	// The worst case is 100 + 15 ms
++		rtw_msleep_os(120);
++		
++		for (i=0; i< 10; i++) {
++			reg_bcn_ctrl_1 = rtw_read8(Adapter, REG_BCN_CTRL_1); 
++			if ( (reg_bcn_ctrl_1 & BIT(3)) == 0 ) {
++				//DBG_871X("%s()-%d: BEACON_DISABLE_OFFLOAD finished! reg=%02x\n", __FUNCTION__, __LINE__, reg);
++				break;
++			}
++			DBG_871X("%s()-%d: BEACON_DISABLE_OFFLOAD not finished! REG_BCN_CTRL_1=%02x\n", __FUNCTION__, __LINE__, reg_bcn_ctrl_1);
++			DBG_871X("%s()-%d: reg_bcn_disable_cnt=%02x\n", __FUNCTION__, __LINE__, rtw_read8(Adapter, REG_FW_BCN_DIS_CNT));
++			DBG_871X("%s()-%d: REG_BCN_CTRL=%02x\n", __FUNCTION__, __LINE__, rtw_read8(Adapter, REG_BCN_CTRL));
++			DBG_871X("%s()-%d: FWISR=%08x\n", __FUNCTION__, __LINE__, rtw_read32(Adapter, REG_FWISR));
++			rtw_msleep_os(100);
++		}
++		DBG_871X("%s()-%d: reg_bcn_disable_cnt=%02x\n", __FUNCTION__, __LINE__, rtw_read8(Adapter, REG_FW_BCN_DIS_CNT));
++		DBG_871X("%s()-%d: reg_bcn_ctrl_1=%02x\n", __FUNCTION__, __LINE__, reg_bcn_ctrl_1);
++
++#else   // CONFIG_BEACON_DISABLE_OFFLOAD
++
++		//disable update TSF1
++		rtw_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1)|BIT(4));
++
++		//reset TSF1
++		rtw_write8(Adapter, REG_DUAL_TSF_RST, BIT(1));
++
++		// disable Port1's beacon function
++		rtw_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1)&(~BIT(3)));
++
++#endif  // CONFIG_BEACON_DISABLE_OFFLOAD
++	 	
++		// j, Driver set 0x422 bit 6 =1
++		rtw_write8(Adapter, REG_FWHW_TXQ_CTRL+2, (pHalData->RegFwHwTxQCtrl) | BIT6);
++		pHalData->RegFwHwTxQCtrl |= BIT6;
++
++		// k. re_download beacon pkt 
++		if(check_buddy_mlmeinfo_state(Adapter, WIFI_FW_AP_STATE))	
++			set_tx_beacon_cmd(pbuddy_adapter);
++		   
++
++	}
++	else	// (Adapter->iface_type == IFACE_PORT1)
++	{
++		//disable update TSF
++		rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(4));
++
++		//reset TSF
++		rtw_write8(Adapter, REG_DUAL_TSF_RST, BIT(0));
++
++		// Can't disable Port0's beacon function due to it is used by RA
++	}
++#endif
++}
++
++static void hw_var_set_mlme_sitesurvey(PADAPTER Adapter, u8 variable, u8* val)
++{
++	u32	value_rcr, rcr_clear_bit, reg_bcn_ctl;
++	u16	value_rxfltmap2;
++	struct mlme_priv *pmlmepriv=&(Adapter->mlmepriv);
++
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if(Adapter->iface_type == IFACE_PORT1)
++		reg_bcn_ctl = REG_BCN_CTRL_1;
++	else
++#endif
++		reg_bcn_ctl = REG_BCN_CTRL;
++
++#ifdef CONFIG_FIND_BEST_CHANNEL
++
++	if( (check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE)
++#ifdef CONFIG_CONCURRENT_MODE
++		|| (check_buddy_fwstate(Adapter, WIFI_AP_STATE) == _TRUE)
++#endif
++#ifdef CONFIG_TDLS
++		// TDLS will clear RCR_CBSSID_DATA bit for connection.
++		|| ( Adapter->tdlsinfo.setup_state & TDLS_LINKED_STATE )
++#endif // CONFIG_TDLS
++		)
++	{
++		rcr_clear_bit = RCR_CBSSID_BCN;
++	}
++	else
++	{
++		rcr_clear_bit = (RCR_CBSSID_BCN | RCR_CBSSID_DATA);
++	}
++
++	// Recieve all data frames
++	value_rxfltmap2 = 0xFFFF;
++
++#else /* CONFIG_FIND_BEST_CHANNEL */
++
++	rcr_clear_bit = RCR_CBSSID_BCN;
++
++	//config RCR to receive different BSSID & not to receive data frame
++	value_rxfltmap2 = 0;
++
++#endif /* CONFIG_FIND_BEST_CHANNEL */
++
++	value_rcr = rtw_read32(Adapter, REG_RCR);
++
++	if(*((u8 *)val))//under sitesurvey
++	{
++		value_rcr &= ~(rcr_clear_bit);
++		rtw_write32(Adapter, REG_RCR, value_rcr);
++
++		rtw_write16(Adapter, REG_RXFLTMAP2, value_rxfltmap2);
++
++		if (check_fwstate(pmlmepriv, WIFI_STATION_STATE | WIFI_ADHOC_STATE |WIFI_ADHOC_MASTER_STATE)) {
++			//disable update TSF
++			rtw_write8(Adapter, reg_bcn_ctl, rtw_read8(Adapter, reg_bcn_ctl)|BIT(4));
++		}
++
++#ifdef CONFIG_CONCURRENT_MODE
++		if(check_buddy_mlmeinfo_state(Adapter, WIFI_FW_AP_STATE) &&
++			check_buddy_fwstate(Adapter, _FW_LINKED))
++		{
++			StopTxBeacon(Adapter);
++		}
++#endif
++	}
++	else//sitesurvey done
++	{
++		if(check_fwstate(pmlmepriv, _FW_LINKED) || check_fwstate(pmlmepriv, WIFI_AP_STATE)
++#ifdef CONFIG_CONCURRENT_MODE
++			|| check_buddy_fwstate(Adapter, _FW_LINKED) || check_buddy_fwstate(Adapter, WIFI_AP_STATE)
++#endif
++			)
++		{
++			//enable to rx data frame
++			rtw_write16(Adapter, REG_RXFLTMAP2,0xFFFF);
++		}
++
++		if (check_fwstate(pmlmepriv, WIFI_STATION_STATE | WIFI_ADHOC_STATE |WIFI_ADHOC_MASTER_STATE)) {
++			//enable update TSF
++			rtw_write8(Adapter, reg_bcn_ctl, rtw_read8(Adapter, reg_bcn_ctl)&(~BIT(4)));
++		}
++
++		value_rcr |= rcr_clear_bit;
++		rtw_write32(Adapter, REG_RCR, value_rcr);
++
++#ifdef CONFIG_CONCURRENT_MODE
++		if(check_buddy_mlmeinfo_state(Adapter, WIFI_FW_AP_STATE) &&
++			check_buddy_fwstate(Adapter, _FW_LINKED))
++		{
++			ResumeTxBeacon(Adapter);			
++		}
++#endif
++	}
++}
++
++static void hw_var_set_mlme_join(PADAPTER Adapter, u8 variable, u8* val)
++{
++#ifdef CONFIG_CONCURRENT_MODE
++	u8	RetryLimit = 0x30;
++	u8	type = *((u8 *)val);
++	HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
++	struct mlme_priv	*pmlmepriv = &Adapter->mlmepriv;
++
++	if(type == 0) // prepare to join
++	{		
++		if(check_buddy_mlmeinfo_state(Adapter, WIFI_FW_AP_STATE) &&
++			check_buddy_fwstate(Adapter, _FW_LINKED))		
++		{
++			StopTxBeacon(Adapter);
++		}
++	
++		//enable to rx data frame.Accept all data frame
++		//rtw_write32(padapter, REG_RCR, rtw_read32(padapter, REG_RCR)|RCR_ADF);
++		rtw_write16(Adapter, REG_RXFLTMAP2,0xFFFF);
++
++		if(check_buddy_mlmeinfo_state(Adapter, WIFI_FW_AP_STATE))
++			rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)|RCR_CBSSID_BCN);
++		else
++			rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)|RCR_CBSSID_DATA|RCR_CBSSID_BCN);
++
++		if(check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _TRUE)
++		{
++			RetryLimit = (pHalData->CustomerID == RT_CID_CCX) ? 7 : 48;
++		}
++		else // Ad-hoc Mode
++		{
++			RetryLimit = 0x7;
++		}
++	}
++	else if(type == 1) //joinbss_event call back when join res < 0
++	{		
++		if(check_buddy_mlmeinfo_state(Adapter, _HW_STATE_NOLINK_))		
++			rtw_write16(Adapter, REG_RXFLTMAP2,0x00);
++
++		if(check_buddy_mlmeinfo_state(Adapter, WIFI_FW_AP_STATE) &&
++			check_buddy_fwstate(Adapter, _FW_LINKED))
++		{
++			ResumeTxBeacon(Adapter);			
++			
++			//reset TSF 1/2 after ResumeTxBeacon
++			//rtw_write8(Adapter, REG_DUAL_TSF_RST, BIT(1)|BIT(0));	
++			
++		}
++	}
++	else if(type == 2) //sta add event call back
++	{
++	 
++		//enable update TSF
++		if(Adapter->iface_type == IFACE_PORT1)
++			rtw_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1)&(~BIT(4)));
++		else
++			rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(4)));
++		 
++	
++		if(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE))
++		{
++			//fixed beacon issue for 8191su...........
++			rtw_write8(Adapter,0x542 ,0x02);
++			RetryLimit = 0x7;
++		}
++
++
++		if(check_buddy_mlmeinfo_state(Adapter, WIFI_FW_AP_STATE) &&
++			check_buddy_fwstate(Adapter, _FW_LINKED))
++		{
++			ResumeTxBeacon(Adapter);
++			
++			//reset TSF 1/2 after ResumeTxBeacon
++			//rtw_write8(Adapter, REG_DUAL_TSF_RST, BIT(1)|BIT(0));
++		}
++		
++	}
++
++	rtw_write16(Adapter, REG_RL, RetryLimit << RETRY_LIMIT_SHORT_SHIFT | RetryLimit << RETRY_LIMIT_LONG_SHIFT);
++	
++#endif
++}
++
++void SetHwReg8192CU(PADAPTER Adapter, u8 variable, u8* val)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++
++_func_enter_;
++
++	switch(variable)
++	{
++		case HW_VAR_MEDIA_STATUS:
++			{
++				u8 val8;
++
++				val8 = rtw_read8(Adapter, MSR)&0x0c;
++				val8 |= *((u8 *)val);
++				rtw_write8(Adapter, MSR, val8);
++			}
++			break;
++		case HW_VAR_MEDIA_STATUS1:
++			{
++				u8 val8;
++				
++				val8 = rtw_read8(Adapter, MSR)&0x03;
++				val8 |= *((u8 *)val) <<2;
++				rtw_write8(Adapter, MSR, val8);
++			}
++			break;
++		case HW_VAR_SET_OPMODE:
++			hw_var_set_opmode(Adapter, variable, val);
++			break;
++		case HW_VAR_MAC_ADDR:
++			hw_var_set_macaddr(Adapter, variable, val);			
++			break;
++		case HW_VAR_BSSID:
++			hw_var_set_bssid(Adapter, variable, val);
++			break;
++		case HW_VAR_BASIC_RATE:
++			{
++				u16			BrateCfg = 0;
++				u8			RateIndex = 0;
++				
++				// 2007.01.16, by Emily
++				// Select RRSR (in Legacy-OFDM and CCK)
++				// For 8190, we select only 24M, 12M, 6M, 11M, 5.5M, 2M, and 1M from the Basic rate.
++				// We do not use other rates.
++				HalSetBrateCfg( Adapter, val, &BrateCfg );
++
++				//2011.03.30 add by Luke Lee
++				//CCK 2M ACK should be disabled for some BCM and Atheros AP IOT
++				//because CCK 2M has poor TXEVM
++				//CCK 5.5M & 11M ACK should be enabled for better performance
++
++				pHalData->BasicRateSet = BrateCfg = (BrateCfg |0xd) & 0x15d;
++
++				BrateCfg |= 0x01; // default enable 1M ACK rate
++
++				DBG_8192C("HW_VAR_BASIC_RATE: BrateCfg(%#x)\n", BrateCfg);
++				
++				// Set RRSR rate table.
++				rtw_write8(Adapter, REG_RRSR, BrateCfg&0xff);
++				rtw_write8(Adapter, REG_RRSR+1, (BrateCfg>>8)&0xff);
++				rtw_write8(Adapter, REG_RRSR+2, rtw_read8(Adapter, REG_RRSR+2)&0xf0);
++
++				// Set RTS initial rate
++				while(BrateCfg > 0x1)
++				{
++					BrateCfg = (BrateCfg>> 1);
++					RateIndex++;
++				}
++				// Ziv - Check
++				rtw_write8(Adapter, REG_INIRTS_RATE_SEL, RateIndex);
++			}
++			break;
++		case HW_VAR_TXPAUSE:
++			rtw_write8(Adapter, REG_TXPAUSE, *((u8 *)val));	
++			break;
++		case HW_VAR_BCN_FUNC:
++			hw_var_set_bcn_func(Adapter, variable, val);
++			break;
++		case HW_VAR_CORRECT_TSF:
++#ifdef CONFIG_CONCURRENT_MODE
++			hw_var_set_correct_tsf(Adapter, variable, val);
++#else			
++			{
++				u64	tsf;
++				struct mlme_ext_priv	*pmlmeext = &Adapter->mlmeextpriv;
++				struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++				//tsf = pmlmeext->TSFValue - ((u32)pmlmeext->TSFValue % (pmlmeinfo->bcn_interval*1024)) -1024; //us
++				tsf = pmlmeext->TSFValue - rtw_modular64(pmlmeext->TSFValue, (pmlmeinfo->bcn_interval*1024)) -1024; //us
++
++				if(((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) || ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE))
++				{				
++					//pHalData->RegTxPause |= STOP_BCNQ;BIT(6)
++					//rtw_write8(Adapter, REG_TXPAUSE, (rtw_read8(Adapter, REG_TXPAUSE)|BIT(6)));
++					StopTxBeacon(Adapter);
++				}
++
++				//disable related TSF function
++				rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(3)));
++							
++				rtw_write32(Adapter, REG_TSFTR, tsf);
++				rtw_write32(Adapter, REG_TSFTR+4, tsf>>32);
++
++				//enable related TSF function
++				rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(3));
++				
++							
++				if(((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) || ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE))
++				{
++					//pHalData->RegTxPause  &= (~STOP_BCNQ);
++					//rtw_write8(Adapter, REG_TXPAUSE, (rtw_read8(Adapter, REG_TXPAUSE)&(~BIT(6))));
++					ResumeTxBeacon(Adapter);
++				}
++			}
++#endif
++			break;
++		case HW_VAR_CHECK_BSSID:
++			if(*((u8 *)val))
++			{
++				rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)|RCR_CBSSID_DATA|RCR_CBSSID_BCN);
++			}
++			else
++			{
++				u32	val32;
++
++				val32 = rtw_read32(Adapter, REG_RCR);
++				val32 &= ~(RCR_CBSSID_DATA | RCR_CBSSID_BCN);
++				rtw_write32(Adapter, REG_RCR, val32);
++			}
++			break;
++		case HW_VAR_MLME_DISCONNECT:
++#ifdef CONFIG_CONCURRENT_MODE
++			hw_var_set_mlme_disconnect(Adapter, variable, val);
++#else
++			{
++				//Set RCR to not to receive data frame when NO LINK state
++				//rtw_write32(Adapter, REG_RCR, rtw_read32(padapter, REG_RCR) & ~RCR_ADF);
++				//reject all data frames
++				rtw_write16(Adapter, REG_RXFLTMAP2,0x00);
++
++				//reset TSF
++				rtw_write8(Adapter, REG_DUAL_TSF_RST, (BIT(0)|BIT(1)));
++
++				//disable update TSF
++				rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(4));
++			}
++#endif
++			break;
++		case HW_VAR_MLME_SITESURVEY:
++			hw_var_set_mlme_sitesurvey(Adapter, variable,  val);	
++			break;
++		case HW_VAR_MLME_JOIN:
++#ifdef CONFIG_CONCURRENT_MODE
++			hw_var_set_mlme_join(Adapter, variable,  val);
++#else
++			{
++				u8	RetryLimit = 0x30;
++				u8	type = *((u8 *)val);
++				struct mlme_priv	*pmlmepriv = &Adapter->mlmepriv;
++
++				if(type == 0) // prepare to join
++				{
++					//enable to rx data frame.Accept all data frame
++					//rtw_write32(padapter, REG_RCR, rtw_read32(padapter, REG_RCR)|RCR_ADF);
++					rtw_write16(Adapter, REG_RXFLTMAP2,0xFFFF);
++
++					rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)|RCR_CBSSID_DATA|RCR_CBSSID_BCN);
++
++					if(check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _TRUE)
++					{
++						RetryLimit = (pHalData->CustomerID == RT_CID_CCX) ? 7 : 48;
++					}
++					else // Ad-hoc Mode
++					{
++						RetryLimit = 0x7;
++					}
++				}
++				else if(type == 1) //joinbss_event call back when join res < 0
++				{
++					rtw_write16(Adapter, REG_RXFLTMAP2,0x00);
++				}
++				else if(type == 2) //sta add event call back
++				{
++					//enable update TSF
++					rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(4)));
++
++					if(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE))
++					{
++						//fixed beacon issue for 8191su...........
++						rtw_write8(Adapter,0x542 ,0x02);
++						RetryLimit = 0x7;
++					}
++				}
++
++				rtw_write16(Adapter, REG_RL, RetryLimit << RETRY_LIMIT_SHORT_SHIFT | RetryLimit << RETRY_LIMIT_LONG_SHIFT);
++			}
++#endif
++			break;
++
++		case HW_VAR_ON_RCR_AM:
++			rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)|RCR_AM);
++			DBG_871X("%s, %d, RCR= %x \n", __FUNCTION__,__LINE__, rtw_read32(Adapter, REG_RCR));
++			break;
++		case HW_VAR_OFF_RCR_AM:
++			rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)& (~RCR_AM));
++			DBG_871X("%s, %d, RCR= %x \n", __FUNCTION__,__LINE__, rtw_read32(Adapter, REG_RCR));
++			break;
++
++		case HW_VAR_BEACON_INTERVAL:
++			rtw_write16(Adapter, REG_BCN_INTERVAL, *((u16 *)val));
++			break;
++		case HW_VAR_SLOT_TIME:
++			{
++				u8	u1bAIFS, aSifsTime;
++				struct mlme_ext_priv	*pmlmeext = &Adapter->mlmeextpriv;
++				struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++				
++				rtw_write8(Adapter, REG_SLOT, val[0]);
++
++				if(pmlmeinfo->WMM_enable == 0)
++				{
++					if( pmlmeext->cur_wireless_mode == WIRELESS_11B)
++						aSifsTime = 10;
++					else
++						aSifsTime = 16;
++					
++					u1bAIFS = aSifsTime + (2 * pmlmeinfo->slotTime);
++					
++					// <Roger_EXP> Temporary removed, 2008.06.20.
++					rtw_write8(Adapter, REG_EDCA_VO_PARAM, u1bAIFS);
++					rtw_write8(Adapter, REG_EDCA_VI_PARAM, u1bAIFS);
++					rtw_write8(Adapter, REG_EDCA_BE_PARAM, u1bAIFS);
++					rtw_write8(Adapter, REG_EDCA_BK_PARAM, u1bAIFS);
++				}
++			}
++			break;
++		case HW_VAR_RESP_SIFS:
++			{
++#if 0			
++				// SIFS for OFDM Data ACK
++				rtw_write8(Adapter, REG_SIFS_CTX+1, val[0]);
++				// SIFS for OFDM consecutive tx like CTS data!
++				rtw_write8(Adapter, REG_SIFS_TRX+1, val[1]);
++				
++				rtw_write8(Adapter,REG_SPEC_SIFS+1, val[0]);
++				rtw_write8(Adapter,REG_MAC_SPEC_SIFS+1, val[0]);
++
++				// 20100719 Joseph: Revise SIFS setting due to Hardware register definition change.
++				rtw_write8(Adapter, REG_R2T_SIFS+1, val[0]); //0x08 - CCK
++				rtw_write8(Adapter, REG_T2T_SIFS+1, val[0]); //0x0e - OFDM
++#else
++				//SIFS_Timer = 0x0a0a0808;
++				//RESP_SIFS for CCK
++				rtw_write8(Adapter, REG_R2T_SIFS, val[0]); // SIFS_T2T_CCK (0x08)
++				rtw_write8(Adapter, REG_R2T_SIFS+1, val[1]); //SIFS_R2T_CCK(0x08)
++				//RESP_SIFS for OFDM
++				rtw_write8(Adapter, REG_T2T_SIFS, val[2]); //SIFS_T2T_OFDM (0x0a)
++				rtw_write8(Adapter, REG_T2T_SIFS+1, val[3]); //SIFS_R2T_OFDM(0x0a)
++#endif
++			}
++			break;
++		case HW_VAR_ACK_PREAMBLE:
++			{
++				u8	regTmp;
++				u8	bShortPreamble = *( (PBOOLEAN)val );
++				// Joseph marked out for Netgear 3500 TKIP channel 7 issue.(Temporarily)
++				regTmp = (pHalData->nCur40MhzPrimeSC)<<5;
++				//regTmp = 0;
++				if(bShortPreamble)
++					regTmp |= 0x80;
++
++				rtw_write8(Adapter, REG_RRSR+2, regTmp);
++			}
++			break;
++		case HW_VAR_SEC_CFG:
++#ifdef CONFIG_CONCURRENT_MODE
++			rtw_write8(Adapter, REG_SECCFG, 0x0c|BIT(5));// enable tx enc and rx dec engine, and no key search for MC/BC				
++#else
++			rtw_write8(Adapter, REG_SECCFG, *((u8 *)val));
++#endif
++			break;
++		case HW_VAR_DM_FLAG:
++			pdmpriv->DMFlag = *((u8 *)val);
++			break;
++		case HW_VAR_DM_FUNC_OP:
++			if(val[0])
++			{// save dm flag
++				pdmpriv->DMFlag_tmp = pdmpriv->DMFlag;
++			}
++			else
++			{// restore dm flag
++				pdmpriv->DMFlag = pdmpriv->DMFlag_tmp;
++			}
++			break;
++		case HW_VAR_DM_FUNC_SET:
++			pdmpriv->DMFlag |= *((u8 *)val);
++			break;
++		case HW_VAR_DM_FUNC_CLR:
++			pdmpriv->DMFlag &= *((u8 *)val);
++			break;
++		case HW_VAR_CAM_EMPTY_ENTRY:
++			{
++				u8	ucIndex = *((u8 *)val);
++				u8	i;
++				u32	ulCommand=0;
++				u32	ulContent=0;
++				u32	ulEncAlgo=CAM_AES;
++
++				for(i=0;i<CAM_CONTENT_COUNT;i++)
++				{
++					// filled id in CAM config 2 byte
++					if( i == 0)
++					{
++						ulContent |=(ucIndex & 0x03) | ((u16)(ulEncAlgo)<<2);
++						//ulContent |= CAM_VALID;
++					}
++					else
++					{
++						ulContent = 0;
++					}
++					// polling bit, and No Write enable, and address
++					ulCommand= CAM_CONTENT_COUNT*ucIndex+i;
++					ulCommand= ulCommand | CAM_POLLINIG|CAM_WRITE;
++					// write content 0 is equall to mark invalid
++					rtw_write32(Adapter, WCAMI, ulContent);  //delay_ms(40);
++					//RT_TRACE(COMP_SEC, DBG_LOUD, ("CAM_empty_entry(): WRITE A4: %lx \n",ulContent));
++					rtw_write32(Adapter, RWCAM, ulCommand);  //delay_ms(40);
++					//RT_TRACE(COMP_SEC, DBG_LOUD, ("CAM_empty_entry(): WRITE A0: %lx \n",ulCommand));
++				}
++			}
++			break;
++		case HW_VAR_CAM_INVALID_ALL:
++			rtw_write32(Adapter, RWCAM, BIT(31)|BIT(30));
++			break;
++		case HW_VAR_CAM_WRITE:
++			{
++				u32	cmd;
++				u32	*cam_val = (u32 *)val;
++				rtw_write32(Adapter, WCAMI, cam_val[0]);
++				
++				cmd = CAM_POLLINIG | CAM_WRITE | cam_val[1];
++				rtw_write32(Adapter, RWCAM, cmd);
++			}
++			break;
++		case HW_VAR_AC_PARAM_VO:
++			rtw_write32(Adapter, REG_EDCA_VO_PARAM, ((u32 *)(val))[0]);
++			break;
++		case HW_VAR_AC_PARAM_VI:
++			rtw_write32(Adapter, REG_EDCA_VI_PARAM, ((u32 *)(val))[0]);
++			break;
++		case HW_VAR_AC_PARAM_BE:
++			pHalData->AcParam_BE = ((u32 *)(val))[0];
++			rtw_write32(Adapter, REG_EDCA_BE_PARAM, ((u32 *)(val))[0]);
++			break;
++		case HW_VAR_AC_PARAM_BK:
++			rtw_write32(Adapter, REG_EDCA_BK_PARAM, ((u32 *)(val))[0]);
++			break;
++		case HW_VAR_ACM_CTRL:
++			{
++				u8	acm_ctrl = *((u8 *)val);
++				u8	AcmCtrl = rtw_read8( Adapter, REG_ACMHWCTRL);
++
++				if(acm_ctrl > 1)
++					AcmCtrl = AcmCtrl | 0x1;
++
++				if(acm_ctrl & BIT(3))
++					AcmCtrl |= AcmHw_VoqEn;
++				else
++					AcmCtrl &= (~AcmHw_VoqEn);
++
++				if(acm_ctrl & BIT(2))
++					AcmCtrl |= AcmHw_ViqEn;
++				else
++					AcmCtrl &= (~AcmHw_ViqEn);
++
++				if(acm_ctrl & BIT(1))
++					AcmCtrl |= AcmHw_BeqEn;
++				else
++					AcmCtrl &= (~AcmHw_BeqEn);
++
++				DBG_871X("[HW_VAR_ACM_CTRL] Write 0x%X\n", AcmCtrl );
++				rtw_write8(Adapter, REG_ACMHWCTRL, AcmCtrl );
++			}
++			break;
++		case HW_VAR_AMPDU_MIN_SPACE:
++			{
++				u8	MinSpacingToSet;
++				u8	SecMinSpace;
++
++				MinSpacingToSet = *((u8 *)val);
++				if(MinSpacingToSet <= 7)
++				{
++					switch(Adapter->securitypriv.dot11PrivacyAlgrthm)
++					{
++						case _NO_PRIVACY_:
++						case _AES_:
++							SecMinSpace = 0;
++							break;
++
++						case _WEP40_:
++						case _WEP104_:
++						case _TKIP_:
++						case _TKIP_WTMIC_:
++							SecMinSpace = 6;
++							break;
++						default:
++							SecMinSpace = 7;
++							break;
++					}
++
++					if(MinSpacingToSet < SecMinSpace){
++						MinSpacingToSet = SecMinSpace;
++					}
++
++					//RT_TRACE(COMP_MLME, DBG_LOUD, ("Set HW_VAR_AMPDU_MIN_SPACE: %#x\n", Adapter->MgntInfo.MinSpaceCfg));
++					rtw_write8(Adapter, REG_AMPDU_MIN_SPACE, (rtw_read8(Adapter, REG_AMPDU_MIN_SPACE) & 0xf8) | MinSpacingToSet);
++				}
++			}
++			break;
++		case HW_VAR_AMPDU_FACTOR:
++			{
++				u8	RegToSet_Normal[4]={0x41,0xa8,0x72, 0xb9};
++				u8	RegToSet_BT[4]={0x31,0x74,0x42, 0x97};
++				u8	FactorToSet;
++				u8	*pRegToSet;
++				u8	index = 0;
++
++#ifdef CONFIG_BT_COEXIST
++				if(	(pHalData->bt_coexist.BT_Coexist) &&
++					(pHalData->bt_coexist.BT_CoexistType == BT_CSR_BC4) )
++					pRegToSet = RegToSet_BT; // 0x97427431;
++				else
++#endif
++					pRegToSet = RegToSet_Normal; // 0xb972a841;
++
++				FactorToSet = *((u8 *)val);
++				if(FactorToSet <= 3)
++				{
++					FactorToSet = (1<<(FactorToSet + 2));
++					if(FactorToSet>0xf)
++						FactorToSet = 0xf;
++
++					for(index=0; index<4; index++)
++					{
++						if((pRegToSet[index] & 0xf0) > (FactorToSet<<4))
++							pRegToSet[index] = (pRegToSet[index] & 0x0f) | (FactorToSet<<4);
++					
++						if((pRegToSet[index] & 0x0f) > FactorToSet)
++							pRegToSet[index] = (pRegToSet[index] & 0xf0) | (FactorToSet);
++						
++						rtw_write8(Adapter, (REG_AGGLEN_LMT+index), pRegToSet[index]);
++					}
++
++					//RT_TRACE(COMP_MLME, DBG_LOUD, ("Set HW_VAR_AMPDU_FACTOR: %#x\n", FactorToSet));
++				}
++			}
++			break;
++		case HW_VAR_RXDMA_AGG_PG_TH:
++			#ifdef CONFIG_USB_RX_AGGREGATION
++			{
++				u8	threshold = *((u8 *)val);
++				if( threshold == 0)
++				{
++					threshold = pHalData->UsbRxAggPageCount;
++				}
++				rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH, threshold);
++			}
++			#endif
++			break;
++		case HW_VAR_SET_RPWM:
++			rtw_write8(Adapter, REG_USB_HRPWM, *((u8 *)val));
++			break;
++		case HW_VAR_H2C_FW_PWRMODE:
++			{
++				u8	psmode = (*(u8 *)val);
++			
++				// Forece leave RF low power mode for 1T1R to prevent conficting setting in Fw power
++				// saving sequence. 2010.06.07. Added by tynli. Suggested by SD3 yschang.
++				if( (psmode != PS_MODE_ACTIVE) && (!IS_92C_SERIAL(pHalData->VersionID)))
++				{
++					rtl8192c_dm_RF_Saving(Adapter, _TRUE);
++				}
++				rtl8192c_set_FwPwrMode_cmd(Adapter, psmode);
++			}
++			break;
++		case HW_VAR_H2C_FW_JOINBSSRPT:
++			{
++				u8	mstatus = (*(u8 *)val);
++				rtl8192c_set_FwJoinBssReport_cmd(Adapter, mstatus);
++			}
++			break;
++#ifdef CONFIG_P2P_PS
++		case HW_VAR_H2C_FW_P2P_PS_OFFLOAD:
++			{
++				u8	p2p_ps_state = (*(u8 *)val);
++				rtl8192c_set_p2p_ps_offload_cmd(Adapter, p2p_ps_state);
++			}
++			break;
++#endif // CONFIG_P2P_PS
++#ifdef CONFIG_TDLS
++		case HW_VAR_TDLS_WRCR:
++			rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)&(~ BIT(6) ));
++			break;
++		case HW_VAR_TDLS_INIT_CH_SEN:
++			{
++				rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)&(~ BIT(6) )&(~ BIT(7) ));
++				rtw_write16(Adapter, REG_RXFLTMAP2,0xffff);
++
++				//disable update TSF
++				rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(4));
++			}
++			break;
++		case HW_VAR_TDLS_DONE_CH_SEN:
++			{
++				//enable update TSF
++				rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~ BIT(4)));
++				rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)|(BIT(7) ));
++			}
++			break;
++		case HW_VAR_TDLS_RS_RCR:
++			rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)|(BIT(6)));
++			break;
++#endif //CONFIG_TDLS
++		case HW_VAR_INITIAL_GAIN:
++			{
++				DIG_T	*pDigTable = &pdmpriv->DM_DigTable;					
++				u32 		rx_gain = ((u32 *)(val))[0];
++
++				if(rx_gain == 0xff){//restore rx gain
++					pDigTable->CurIGValue = pDigTable->BackupIGValue;
++					PHY_SetBBReg(Adapter, rOFDM0_XAAGCCore1, 0x7f,pDigTable->CurIGValue );
++					PHY_SetBBReg(Adapter, rOFDM0_XBAGCCore1, 0x7f,pDigTable->CurIGValue);
++				}
++				else{
++					pDigTable->BackupIGValue = pDigTable->CurIGValue;
++					PHY_SetBBReg(Adapter, rOFDM0_XAAGCCore1, 0x7f,rx_gain );
++					PHY_SetBBReg(Adapter, rOFDM0_XBAGCCore1, 0x7f,rx_gain);
++					pDigTable->CurIGValue = (u8)rx_gain;
++				}
++
++
++			}
++			break;
++		case HW_VAR_TRIGGER_GPIO_0:
++			rtl8192cu_trigger_gpio_0(Adapter);
++			break;
++#ifdef CONFIG_BT_COEXIST
++		case HW_VAR_BT_SET_COEXIST:
++			{
++				u8	bStart = (*(u8 *)val);
++				rtl8192c_set_dm_bt_coexist(Adapter, bStart);
++			}
++			break;
++		case HW_VAR_BT_ISSUE_DELBA:
++			{
++				u8	dir = (*(u8 *)val);
++				rtl8192c_issue_delete_ba(Adapter, dir);
++			}
++			break;
++#endif
++#ifdef CONFIG_SW_ANTENNA_DIVERSITY
++
++		case HW_VAR_ANTENNA_DIVERSITY_LINK:
++			SwAntDivRestAfterLink8192C(Adapter);
++			break;
++		case HW_VAR_ANTENNA_DIVERSITY_SELECT:
++			{
++				u8	Optimum_antenna = (*(u8 *)val);
++				//switch antenna to Optimum_antenna
++		//		DBG_8192C("==> HW_VAR_ANTENNA_DIVERSITY_SELECT , Ant_(%s)\n",(Optimum_antenna==2)?"A":"B");
++				if(pHalData->CurAntenna !=  Optimum_antenna)		
++				{
++					PHY_SetBBReg(Adapter, rFPGA0_XA_RFInterfaceOE, 0x300, Optimum_antenna);
++					pHalData->CurAntenna = Optimum_antenna ;
++					//DBG_8192C("==> HW_VAR_ANTENNA_DIVERSITY_SELECT , Ant_(%s)\n",(Optimum_antenna==2)?"A":"B");
++				}
++			}
++			break;
++#endif
++		case HW_VAR_EFUSE_BYTES: // To set EFUE total used bytes, added by Roger, 2008.12.22.
++			pHalData->EfuseUsedBytes = *((u16 *)val);			
++			break;
++		case HW_VAR_FIFO_CLEARN_UP:
++			{
++				#define RW_RELEASE_EN		BIT18
++				#define RXDMA_IDLE			BIT17
++				
++				struct pwrctrl_priv *pwrpriv = &Adapter->pwrctrlpriv;
++				u8 trycnt = 100;	
++				
++				//pause tx
++				rtw_write8(Adapter,REG_TXPAUSE,0xff);
++			
++				//keep sn
++				Adapter->xmitpriv.nqos_ssn = rtw_read16(Adapter,REG_NQOS_SEQ);
++
++				if(pwrpriv->bkeepfwalive != _TRUE)
++				{
++					//RX DMA stop
++					rtw_write32(Adapter,REG_RXPKT_NUM,(rtw_read32(Adapter,REG_RXPKT_NUM)|RW_RELEASE_EN));
++					do{
++						if(!(rtw_read32(Adapter,REG_RXPKT_NUM)&RXDMA_IDLE))
++							break;
++					}while(trycnt--);
++					if(trycnt ==0)
++						DBG_8192C("Stop RX DMA failed...... \n");
++
++					//RQPN Load 0
++					rtw_write16(Adapter,REG_RQPN_NPQ,0x0);
++					rtw_write32(Adapter,REG_RQPN,0x80000000);
++					rtw_mdelay_os(10);
++				}
++			}
++			break;
++			case HW_VAR_WOWLAN:
++#ifdef CONFIG_WOWLAN			
++			{
++				struct wowlan_ioctl_param *poidparam;
++
++				int res;
++
++				poidparam = (struct wowlan_ioctl_param *)val;
++				switch (poidparam->subcode){
++					case WOWLAN_PATTERN_MATCH:
++						//Turn on the Pattern Match feature
++						DBG_8192C("\n PATTERN_MATCH poidparam->subcode_value=%d\n",poidparam->subcode_value);
++						if(poidparam->subcode_value==1){
++							//rtw_write8(Adapter, REG_WOW_CTRL, (rtw_read8(Adapter, REG_WOW_CTRL)|BIT(1)));
++							Adapter->pwrctrlpriv.wowlan_pattern=_TRUE; 
++							DBG_8192C("%s Adapter->pwrctrlpriv.wowlan_pattern=%x\n",__FUNCTION__,Adapter->pwrctrlpriv.wowlan_pattern); 
++						}
++						else{
++							//rtw_write8(Adapter, REG_WOW_CTRL, (rtw_read8(Adapter, REG_WOW_CTRL)&~BIT(1)));
++							Adapter->pwrctrlpriv.wowlan_pattern=_FALSE; 
++						}
++						break;
++					case WOWLAN_MAGIC_PACKET:
++						//Turn on the Magic Packet feature
++						DBG_8192C("\n MAGIC_PACKET poidparam->subcode_value=%d\n",poidparam->subcode_value);
++						if(poidparam->subcode_value==1){
++							//rtw_write8(Adapter, REG_WOW_CTRL, (rtw_read8(Adapter, REG_WOW_CTRL)|BIT(2)));
++							Adapter->pwrctrlpriv.wowlan_magic=_TRUE; 
++							DBG_8192C("%s Adapter->pwrctrlpriv.wowlan_magic=%x\n",__FUNCTION__,Adapter->pwrctrlpriv.wowlan_magic); 
++						}
++						else{
++							//rtw_write8(Adapter, REG_WOW_CTRL, (rtw_read8(Adapter, REG_WOW_CTRL)&~BIT(2)));
++							Adapter->pwrctrlpriv.wowlan_magic=_FALSE; 
++						}
++						break;
++					case WOWLAN_UNICAST:
++						//Turn on the Unicast wakeup feature
++						if(poidparam->subcode_value==1){
++							//rtw_write8(Adapter, REG_WOW_CTRL, (rtw_read8(Adapter, REG_WOW_CTRL)|BIT(3)));
++							Adapter->pwrctrlpriv.wowlan_unicast=_TRUE; 
++						}
++						else{
++							//rtw_write8(Adapter, REG_WOW_CTRL, (rtw_read8(Adapter, REG_WOW_CTRL)&~BIT(3)));
++							Adapter->pwrctrlpriv.wowlan_unicast=_FALSE; 
++							DBG_8192C("%s Adapter->pwrctrlpriv.wowlan_unicast=%x\n",__FUNCTION__,Adapter->pwrctrlpriv.wowlan_unicast); 
++						}
++						break;
++					case WOWLAN_SET_PATTERN:
++						//Setting the Pattern for wowlan
++						res=rtw_wowlan_set_pattern(Adapter,poidparam->pattern);
++						if(res)
++							DBG_8192C("rtw_wowlan_set_pattern retern value=0x%x",res);
++						break;
++					case WOWLAN_DUMP_REG:
++						//dump the WKFMCAM and WOW_CTRL register
++						/*DBG_8192C("\n\n\n\n rtw_wowlan_ctrl: WOW_CTRL=0x%x \n",rtw_read8(Adapter, REG_WOW_CTRL));
++						DBG_8192C("print WKFMCAM index =%d ",poidparam->data[0]);
++						{	int cmd=0,offset=0;
++							for(offset=0;offset<5;offset++){
++								cmd=BIT(31)|(poidparam->data[0]+offset);
++								rtw_write32(Adapter, REG_WKFMCAM_CMD, cmd);
++								DBG_8192C("offset[%d]=0x%.8x  ",offset,rtw_read32(Adapter, REG_WKFMCAM_RWD));
++								DBG_8192C("offset[%d]=MSB 0x%x:0x%x:0x%x:0x%x  ",offset,rtw_read8(Adapter, REG_WKFMCAM_RWD+3),rtw_read8(Adapter, REG_WKFMCAM_RWD+2),rtw_read8(Adapter, REG_WKFMCAM_RWD+1),rtw_read8(Adapter, REG_WKFMCAM_RWD));
++							}
++						}*/
++					
++						break;
++					case WOWLAN_ENABLE:
++						SetFwRelatedForWoWLAN8192CU(Adapter, _TRUE);
++						//Set Pattern
++						if(Adapter->pwrctrlpriv.wowlan_pattern==_TRUE)
++							rtw_wowlan_reload_pattern(Adapter);
++						rtl8192c_set_wowlan_cmd(Adapter);
++						rtw_write8(Adapter, 0x6, rtw_read8(Adapter, 0x6)|BIT(3));
++						rtw_msleep_os(10);
++						//DBG_8192C(" \n REG_WOW_CTRL=0x%x \n",rtw_read8(Adapter, REG_WOW_CTRL));
++//						if(rtw_read8(Adapter, REG_WOW_CTRL)==0)
++//							rtw_write8(Adapter, REG_WOW_CTRL, (rtw_read8(Adapter, REG_WOW_CTRL)|BIT(1)|BIT(2)|BIT(3)));
++						//DBG_8192C(" \n REG_WOW_CTRL=0x%x \n",rtw_read8(Adapter, REG_WOW_CTRL));
++						break;
++	
++					case WOWLAN_DISABLE:
++						Adapter->pwrctrlpriv.wowlan_mode=_FALSE;
++						rtl8192c_set_wowlan_cmd(Adapter);
++						rtw_msleep_os(10);
++						break;
++					
++					case WOWLAN_STATUS:
++						poidparam->wakeup_reason = rtw_read8(Adapter, REG_WOWLAN_REASON);
++						DBG_8192C("wake on wlan reason 0x%02x\n", poidparam->wakeup_reason);
++						break;
++	
++					default:
++						break;
++				}
++				if (Adapter->pwrctrlpriv.wowlan_unicast||Adapter->pwrctrlpriv.wowlan_magic || Adapter->pwrctrlpriv.wowlan_pattern)
++					Adapter->pwrctrlpriv.wowlan_mode =_TRUE;
++				else
++					Adapter->pwrctrlpriv.wowlan_mode =_FALSE;
++			}
++
++			break;
++#endif //CONFIG_WOWLAN
++		case HW_VAR_CHECK_TXBUF:
++#ifdef CONFIG_CONCURRENT_MODE				
++			{
++				int i;
++				u8	RetryLimit = 0x01;
++				
++				//rtw_write16(Adapter, REG_RL,0x0101);
++				rtw_write16(Adapter, REG_RL, RetryLimit << RETRY_LIMIT_SHORT_SHIFT | RetryLimit << RETRY_LIMIT_LONG_SHIFT);
++		
++				for(i=0;i<1000;i++)
++				{
++					if(rtw_read32(Adapter, 0x200) != rtw_read32(Adapter, 0x204))
++					{
++						//DBG_871X("packet in tx packet buffer - 0x204=%x, 0x200=%x (%d)\n", rtw_read32(Adapter, 0x204), rtw_read32(Adapter, 0x200), i);
++						rtw_msleep_os(10);
++					}
++					else
++					{
++						DBG_871X("no packet in tx packet buffer (%d)\n", i);
++						break;
++					}
++				}
++
++				RetryLimit = 0x30;	
++				rtw_write16(Adapter, REG_RL, RetryLimit << RETRY_LIMIT_SHORT_SHIFT | RetryLimit << RETRY_LIMIT_LONG_SHIFT);
++		
++			}
++#endif
++			break;
++		case HW_VAR_BCN_VALID:
++			//BCN_VALID, BIT16 of REG_TDECTRL = BIT0 of REG_TDECTRL+2, write 1 to clear, Clear by sw
++			rtw_write8(Adapter, REG_TDECTRL+2, rtw_read8(Adapter, REG_TDECTRL+2) | BIT0); 
++			break;
++		case HW_VAR_USB_RXAGG_PAGE_TO:
++			rtw_write8(Adapter, REG_USB_DMA_AGG_TO, *((u8 *)val));
++			break;
++		default:
++			break;
++	}
++
++_func_exit_;
++}
++
++void GetHwReg8192CU(PADAPTER Adapter, u8 variable, u8* val)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++
++_func_enter_;
++
++	switch(variable)
++	{
++		case HW_VAR_BASIC_RATE:
++			*((u16 *)(val)) = pHalData->BasicRateSet;
++		case HW_VAR_TXPAUSE:
++			val[0] = rtw_read8(Adapter, REG_TXPAUSE);
++			break;
++		case HW_VAR_BCN_VALID:
++			//BCN_VALID, BIT16 of REG_TDECTRL = BIT0 of REG_TDECTRL+2
++			val[0] = (BIT0 & rtw_read8(Adapter, REG_TDECTRL+2))?_TRUE:_FALSE;
++			break;
++		case HW_VAR_DM_FLAG:
++			val[0] = pHalData->dmpriv.DMFlag;
++			break;
++		case HW_VAR_RF_TYPE:
++			val[0] = pHalData->rf_type;
++			break;
++		case HW_VAR_FWLPS_RF_ON:
++			{
++				//When we halt NIC, we should check if FW LPS is leave.
++				u32	valRCR;
++				
++				if(Adapter->pwrctrlpriv.rf_pwrstate == rf_off)
++				{
++					// If it is in HW/SW Radio OFF or IPS state, we do not check Fw LPS Leave,
++					// because Fw is unload.
++					val[0] = _TRUE;
++				}
++				else
++				{
++					valRCR = rtw_read32(Adapter, REG_RCR);
++					valRCR &= 0x00070000;
++					if(valRCR)
++						val[0] = _FALSE;
++					else
++						val[0] = _TRUE;
++				}
++			}
++			break;
++#ifdef CONFIG_ANTENNA_DIVERSITY
++		case HW_VAR_CURRENT_ANTENNA:
++			val[0] = pHalData->CurAntenna;
++			break;
++#endif
++		case HW_VAR_EFUSE_BYTES: // To get EFUE total used bytes, added by Roger, 2008.12.22.
++			*((u16 *)(val)) = pHalData->EfuseUsedBytes;	
++			break;
++		case HW_VAR_VID:
++			*((u16 *)(val)) = pHalData->EEPROMVID;
++			break;
++		case HW_VAR_PID:
++			*((u16 *)(val)) = pHalData->EEPROMPID;
++			break;
++		default:
++			break;
++	}
++
++_func_exit_;
++}
++
++//
++//	Description: 
++//		Query setting of specified variable.
++//
++u8
++GetHalDefVar8192CUsb(
++	IN	PADAPTER				Adapter,
++	IN	HAL_DEF_VARIABLE		eVariable,
++	IN	PVOID					pValue
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	u8			bResult = _TRUE;
++
++	switch(eVariable)
++	{
++		case HAL_DEF_UNDERCORATEDSMOOTHEDPWDB:
++#if 0 //trunk
++			{
++				struct mlme_priv *pmlmepriv = &Adapter->mlmepriv;
++				struct sta_priv * pstapriv = &Adapter->stapriv;
++				struct sta_info * psta;
++				psta = rtw_get_stainfo(pstapriv, pmlmepriv->cur_network.network.MacAddress);
++				if(psta)
++				{
++					*((int *)pValue) = psta->rssi_stat.UndecoratedSmoothedPWDB;     
++				}
++			}
++#else //v4 branch
++				//if(check_fwstate(&Adapter->mlmepriv, WIFI_STATION_STATE) == _TRUE){
++			*((int *)pValue) = pHalData->dmpriv.UndecoratedSmoothedPWDB;
++				//}
++				//else{
++    
++				//}
++#endif
++			break;
++		case HAL_DEF_IS_SUPPORT_ANT_DIV:
++			#ifdef CONFIG_ANTENNA_DIVERSITY
++			*((u8 *)pValue) = (IS_92C_SERIAL(pHalData->VersionID) ||(pHalData->AntDivCfg==0))?_FALSE:_TRUE;
++			#endif
++			break;			
++		case HAL_DEF_CURRENT_ANTENNA:
++			#ifdef CONFIG_ANTENNA_DIVERSITY
++			*(( u8*)pValue) = pHalData->CurAntenna;			
++			#endif
++			break;
++		case HAL_DEF_DRVINFO_SZ:
++			*(( u32*)pValue) = DRVINFO_SZ;
++			break;
++		case HAL_DEF_MAX_RECVBUF_SZ:
++			*(( u32*)pValue) = MAX_RECVBUF_SZ;
++			break;
++		case HAL_DEF_RX_PACKET_OFFSET:
++			*(( u32*)pValue) = RXDESC_SIZE + DRVINFO_SZ;
++			break;
++		case HAL_DEF_DBG_DUMP_RXPKT:
++			*(( u8*)pValue) = pHalData->bDumpRxPkt;
++			break;
++		case HAL_DEF_DBG_DM_FUNC:
++			*(( u8*)pValue) = pHalData->dmpriv.DMFlag;
++			break;
++		default:
++			//RT_TRACE(COMP_INIT, DBG_WARNING, ("GetHalDefVar8192CUsb(): Unkown variable: %d!\n", eVariable));
++			bResult = _FALSE;
++			break;
++	}
++
++	return bResult;
++}
++
++
++
++
++//
++//	Description:
++//		Change default setting of specified variable.
++//
++u8
++SetHalDefVar8192CUsb(
++	IN	PADAPTER				Adapter,
++	IN	HAL_DEF_VARIABLE		eVariable,
++	IN	PVOID					pValue
++	)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(Adapter);
++	u8			bResult = _TRUE;
++
++	switch(eVariable)
++	{
++		case HAL_DEF_DBG_DUMP_RXPKT:
++			pHalData->bDumpRxPkt = *(( u8*)pValue);
++			break;
++		case HAL_DEF_DBG_DM_FUNC:
++			{
++				u8 dm_func = *(( u8*)pValue);
++				struct dm_priv	*pdmpriv = &pHalData->dmpriv;	
++				
++				if(dm_func == 0){ //disable all dynamic func
++					pdmpriv->DMFlag = DYNAMIC_FUNC_DISABLE;
++					DBG_8192C("==> Disable all dynamic function...\n");
++				}
++				else if(dm_func == 1){//disable DIG
++					pdmpriv->DMFlag &= (~DYNAMIC_FUNC_DIG);
++					DBG_8192C("==> Disable DIG...\n");
++				}
++				else if(dm_func == 2){//disable High power
++					pdmpriv->DMFlag &= (~DYNAMIC_FUNC_HP);
++				}
++				else if(dm_func == 3){//disable tx power tracking
++					pdmpriv->DMFlag &= (~DYNAMIC_FUNC_SS);
++					DBG_8192C("==> Disable tx power tracking...\n");
++				}
++				else if(dm_func == 4){//disable BT coexistence
++					pdmpriv->DMFlag &= (~DYNAMIC_FUNC_BT);
++				}
++				else if(dm_func == 5){//disable antenna diversity
++					pdmpriv->DMFlag &= (~DYNAMIC_FUNC_ANT_DIV);
++				}				
++				else if(dm_func == 6){//turn on all dynamic func
++					if(!(pdmpriv->DMFlag & DYNAMIC_FUNC_DIG))
++					{
++						struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++						DIG_T	*pDigTable = &pdmpriv->DM_DigTable;
++						pDigTable->PreIGValue = rtw_read8(Adapter,0xc50);	
++					}
++						
++					pdmpriv->DMFlag |= (DYNAMIC_FUNC_DIG|DYNAMIC_FUNC_HP|DYNAMIC_FUNC_SS|
++						DYNAMIC_FUNC_BT|DYNAMIC_FUNC_ANT_DIV) ;
++					DBG_8192C("==> Turn on all dynamic function...\n");
++				}			
++			}
++			break;
++		default:
++			//RT_TRACE(COMP_INIT, DBG_TRACE, ("SetHalDefVar819xUsb(): Unkown variable: %d!\n", eVariable));
++			bResult = _FALSE;
++			break;
++	}
++
++	return bResult;
++}
++
++u32  _update_92cu_basic_rate(_adapter *padapter, unsigned int mask)
++{
++	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(padapter);
++#ifdef CONFIG_BT_COEXIST
++	struct btcoexist_priv	*pbtpriv = &(pHalData->bt_coexist);
++#endif
++	unsigned int BrateCfg = 0;
++
++#ifdef CONFIG_BT_COEXIST
++	if(	(pbtpriv->BT_Coexist) &&	(pbtpriv->BT_CoexistType == BT_CSR_BC4)	)
++	{
++		BrateCfg = mask  & 0x151;
++		//DBG_8192C("BT temp disable cck 2/5.5/11M, (0x%x = 0x%x)\n", REG_RRSR, BrateCfg & 0x151);
++	}
++	else
++#endif
++	{
++		if(pHalData->VersionID != VERSION_TEST_CHIP_88C)
++			BrateCfg = mask  & 0x15F;
++		else	//for 88CU 46PING setting, Disable CCK 2M, 5.5M, Others must tuning
++			BrateCfg = mask  & 0x159;
++	}
++
++	BrateCfg |= 0x01; // default enable 1M ACK rate					
++
++	return BrateCfg;
++}
++
++void _update_response_rate(_adapter *padapter,unsigned int mask)
++{
++	u8	RateIndex = 0;
++	// Set RRSR rate table.
++	rtw_write8(padapter, REG_RRSR, mask&0xff);
++	rtw_write8(padapter,REG_RRSR+1, (mask>>8)&0xff);
++	
++
++	// Set RTS initial rate
++	while(mask > 0x1)
++	{
++		mask = (mask>> 1);
++		RateIndex++;
++	}
++	rtw_write8(padapter, REG_INIRTS_RATE_SEL, RateIndex);
++}
++
++void UpdateHalRAMask8192CUsb(PADAPTER padapter, u32 mac_id)
++{
++	//volatile unsigned int result;
++	u8	init_rate=0;
++	u8	networkType, raid;	
++	u32	mask;
++	u8	shortGIrate = _FALSE;
++	int	supportRateNum = 0;
++	struct sta_info	*psta;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	WLAN_BSSID_EX 		*cur_network = &(pmlmeinfo->network);
++#ifdef CONFIG_BT_COEXIST
++	struct btcoexist_priv	*pbtpriv = &(pHalData->bt_coexist);
++#endif
++
++	if (mac_id >= NUM_STA) //CAM_SIZE
++	{
++		return;
++	}
++
++	psta = pmlmeinfo->FW_sta_info[mac_id].psta;
++	if(psta == NULL)
++	{
++		return;
++	}
++
++	switch (mac_id)
++	{
++		case 0:// for infra mode
++#ifdef CONFIG_CONCURRENT_MODE
++		case 2:// first station uses macid=0, second station uses macid=2
++#endif
++			supportRateNum = rtw_get_rateset_len(cur_network->SupportedRates);
++			networkType = judge_network_type(padapter, cur_network->SupportedRates, supportRateNum) & 0xf;
++			//pmlmeext->cur_wireless_mode = networkType;
++			raid = networktype_to_raid(networkType);
++						
++			mask = update_supported_rate(cur_network->SupportedRates, supportRateNum);
++			mask |= (pmlmeinfo->HT_enable)? update_MSC_rate(&(pmlmeinfo->HT_caps)): 0;
++			mask |= ((raid<<28)&0xf0000000);
++			
++			if (support_short_GI(padapter, &(pmlmeinfo->HT_caps)))
++			{
++				shortGIrate = _TRUE;
++			}
++			
++			break;
++
++		case 1://for broadcast/multicast
++			supportRateNum = rtw_get_rateset_len(pmlmeinfo->FW_sta_info[mac_id].SupportedRates);
++			if(pmlmeext->cur_wireless_mode & WIRELESS_11B)
++				networkType = WIRELESS_11B;
++			else
++				networkType = WIRELESS_11G;
++			raid = networktype_to_raid(networkType);
++
++			mask = update_basic_rate(cur_network->SupportedRates, supportRateNum);
++			mask |= ((raid<<28)&0xf0000000);
++
++			break;
++
++		default: //for each sta in IBSS
++#ifdef CONFIG_TDLS
++			if(psta->tdls_sta_state & TDLS_LINKED_STATE)
++			{
++				shortGIrate = update_sgi_tdls(padapter, psta);
++				mask = update_mask_tdls(padapter, psta);
++				raid = mask>>28;
++				break;
++			}
++			else
++#endif //CONFIG_TDLS
++			{
++				supportRateNum = rtw_get_rateset_len(pmlmeinfo->FW_sta_info[mac_id].SupportedRates);
++				networkType = judge_network_type(padapter, pmlmeinfo->FW_sta_info[mac_id].SupportedRates, supportRateNum) & 0xf;
++				//pmlmeext->cur_wireless_mode = networkType;
++				raid = networktype_to_raid(networkType);
++				
++				mask = update_supported_rate(cur_network->SupportedRates, supportRateNum);
++				mask |= ((raid<<28)&0xf0000000);
++
++				//todo: support HT in IBSS
++				
++				break;
++			}
++	}
++	
++#ifdef CONFIG_BT_COEXIST
++	if( (pbtpriv->BT_Coexist) &&
++		(pbtpriv->BT_CoexistType == BT_CSR_BC4) &&
++		(pbtpriv->BT_CUR_State) &&
++		(pbtpriv->BT_Ant_isolation) &&
++		((pbtpriv->BT_Service==BT_SCO)||
++		(pbtpriv->BT_Service==BT_Busy)) )
++		mask &= 0xffffcfc0;
++	else		
++#endif
++		mask &=0xffffffff;
++	
++	
++	init_rate = get_highest_rate_idx(mask)&0x3f;
++	
++	if(pHalData->fw_ractrl == _TRUE)
++	{
++		u8 arg = 0;
++
++		//arg = (cam_idx-4)&0x1f;//MACID
++		arg = mac_id&0x1f;//MACID
++		
++		arg |= BIT(7);
++		
++		if (shortGIrate==_TRUE)
++			arg |= BIT(5);
++
++		DBG_871X("update raid entry, mask=0x%x, arg=0x%x\n", mask, arg);
++		psta->ra_mask=mask;
++#ifdef CONFIG_INTEL_PROXIM
++		if(padapter->proximity.proxim_on ==_TRUE){
++			arg &= ~BIT(6);
++		}
++		else {
++			arg |= BIT(6);
++		}
++#endif //CONFIG_INTEL_PROXIM
++		rtl8192c_set_raid_cmd(padapter, mask, arg);	
++		
++	}
++	else
++	{
++		if (shortGIrate==_TRUE)
++			init_rate |= BIT(6);
++
++		rtw_write8(padapter, (REG_INIDATA_RATE_SEL+mac_id), init_rate);		
++	}
++
++
++	//set ra_id
++	psta->raid = raid;
++	psta->init_rate = init_rate;
++
++	//set correct initial date rate for each mac_id
++	pdmpriv->INIDATA_RATE[mac_id] = init_rate;
++}
++
++void SetBeaconRelatedRegisters8192CUsb(PADAPTER padapter)
++{
++	u32	value32;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	//reset TSF, enable update TSF, correcting TSF On Beacon 
++	
++	//REG_BCN_INTERVAL
++	//REG_BCNDMATIM
++	//REG_ATIMWND
++	//REG_TBTT_PROHIBIT
++	//REG_DRVERLYINT
++	//REG_BCN_MAX_ERR	
++	//REG_BCNTCFG //(0x510)
++	//REG_DUAL_TSF_RST
++	//REG_BCN_CTRL //(0x550) 
++
++	//BCN interval
++	rtw_write16(padapter, REG_BCN_INTERVAL, pmlmeinfo->bcn_interval);
++	rtw_write8(padapter, REG_ATIMWND, 0x02);// 2ms
++
++	_InitBeaconParameters(padapter);
++
++	rtw_write8(padapter, REG_SLOT, 0x09);
++
++	value32 =rtw_read32(padapter, REG_TCR); 
++	value32 &= ~TSFRST;
++	rtw_write32(padapter,  REG_TCR, value32); 
++
++	value32 |= TSFRST;
++	rtw_write32(padapter, REG_TCR, value32); 
++
++	// NOTE: Fix test chip's bug (about contention windows's randomness)
++	rtw_write8(padapter,  REG_RXTSF_OFFSET_CCK, 0x50);
++	rtw_write8(padapter, REG_RXTSF_OFFSET_OFDM, 0x50);
++
++	_BeaconFunctionEnable(padapter, _TRUE, _TRUE);
++
++	ResumeTxBeacon(padapter);
++
++	//rtw_write8(padapter, 0x422, rtw_read8(padapter, 0x422)|BIT(6));
++	
++	//rtw_write8(padapter, 0x541, 0xff);
++
++	//rtw_write8(padapter, 0x542, rtw_read8(padapter, 0x541)|BIT(0));
++
++	rtw_write8(padapter, REG_BCN_CTRL, rtw_read8(padapter, REG_BCN_CTRL)|BIT(1));
++
++}
++
++static void rtl8192cu_init_default_value(_adapter * padapter)
++{
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++	struct pwrctrl_priv *pwrctrlpriv = &padapter->pwrctrlpriv;
++	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
++	u8	i;
++
++	//init default value
++	pHalData->fw_ractrl = _FALSE;	
++	pHalData->bIQKInitialized = _FALSE;
++	if(!pwrctrlpriv->bkeepfwalive)
++		pHalData->LastHMEBoxNum = 0;
++	
++	pHalData->bIQKInitialized = _FALSE;
++	//init dm default value
++	pdmpriv->TM_Trigger = 0;
++	pdmpriv->binitialized = _FALSE;
++	pdmpriv->prv_traffic_idx = 3;
++	pdmpriv->initialize = 0;
++
++	pdmpriv->ThermalValue_HP_index = 0;
++	for(i = 0; i < HP_THERMAL_NUM; i++)
++		pdmpriv->ThermalValue_HP[i] = 0;
++}
++
++static u8 rtl8192cu_ps_func(PADAPTER Adapter,HAL_INTF_PS_FUNC efunc_id, u8 *val)
++{	
++	u8 bResult = _TRUE;
++	switch(efunc_id){
++
++		#if defined(CONFIG_AUTOSUSPEND) && defined(SUPPORT_HW_RFOFF_DETECTED)
++		case HAL_USB_SELECT_SUSPEND:
++			{
++				u8 bfwpoll = *(( u8*)val);
++				rtl8192c_set_FwSelectSuspend_cmd(Adapter,bfwpoll ,500);//note fw to support hw power down ping detect
++			}
++			break;
++		#endif //CONFIG_AUTOSUSPEND && SUPPORT_HW_RFOFF_DETECTED
++
++		default:
++			break;
++	}
++	return bResult;
++}
++
++void rtl8192cu_set_hal_ops(_adapter * padapter)
++{
++	struct hal_ops	*pHalFunc = &padapter->HalFunc;
++
++_func_enter_;
++
++	padapter->HalData = rtw_zmalloc(sizeof(HAL_DATA_TYPE));
++	if(padapter->HalData == NULL){
++		DBG_8192C("cant not alloc memory for HAL DATA \n");
++	}
++	//_rtw_memset(padapter->HalData, 0, sizeof(HAL_DATA_TYPE));
++	padapter->hal_data_sz = sizeof(HAL_DATA_TYPE);
++
++	pHalFunc->hal_init = &rtl8192cu_hal_init;
++	pHalFunc->hal_deinit = &rtl8192cu_hal_deinit;
++
++	//pHalFunc->free_hal_data = &rtl8192c_free_hal_data;
++
++	pHalFunc->inirp_init = &rtl8192cu_inirp_init;
++	pHalFunc->inirp_deinit = &rtl8192cu_inirp_deinit;
++
++	pHalFunc->init_xmit_priv = &rtl8192cu_init_xmit_priv;
++	pHalFunc->free_xmit_priv = &rtl8192cu_free_xmit_priv;
++
++	pHalFunc->init_recv_priv = &rtl8192cu_init_recv_priv;
++	pHalFunc->free_recv_priv = &rtl8192cu_free_recv_priv;
++#ifdef CONFIG_SW_LED
++	pHalFunc->InitSwLeds = &rtl8192cu_InitSwLeds;
++	pHalFunc->DeInitSwLeds = &rtl8192cu_DeInitSwLeds;
++#else //case of hw led or no led
++	pHalFunc->InitSwLeds = NULL;
++	pHalFunc->DeInitSwLeds = NULL;	
++#endif//CONFIG_SW_LED
++
++	//pHalFunc->dm_init = &rtl8192c_init_dm_priv;
++	//pHalFunc->dm_deinit = &rtl8192c_deinit_dm_priv;
++
++	pHalFunc->init_default_value = &rtl8192cu_init_default_value;
++	pHalFunc->intf_chip_configure = &rtl8192cu_interface_configure;
++	pHalFunc->read_adapter_info = &ReadAdapterInfo8192CU;
++
++	//pHalFunc->set_bwmode_handler = &PHY_SetBWMode8192C;
++	//pHalFunc->set_channel_handler = &PHY_SwChnl8192C;
++
++	//pHalFunc->hal_dm_watchdog = &rtl8192c_HalDmWatchDog;
++
++	pHalFunc->SetHwRegHandler = &SetHwReg8192CU;
++	pHalFunc->GetHwRegHandler = &GetHwReg8192CU;
++  	pHalFunc->GetHalDefVarHandler = &GetHalDefVar8192CUsb;
++ 	pHalFunc->SetHalDefVarHandler = &SetHalDefVar8192CUsb;
++
++	pHalFunc->UpdateRAMaskHandler = &UpdateHalRAMask8192CUsb;
++	pHalFunc->SetBeaconRelatedRegistersHandler = &SetBeaconRelatedRegisters8192CUsb;
++
++	//pHalFunc->Add_RateATid = &rtl8192c_Add_RateATid;
++
++//#ifdef CONFIG_SW_ANTENNA_DIVERSITY
++	//pHalFunc->AntDivBeforeLinkHandler = &SwAntDivBeforeLink8192C;
++	//pHalFunc->AntDivCompareHandler = &SwAntDivCompare8192C;
++//#endif
++
++	pHalFunc->hal_xmit = &rtl8192cu_hal_xmit;
++	pHalFunc->mgnt_xmit = &rtl8192cu_mgnt_xmit;
++	pHalFunc->hal_xmitframe_enqueue = &rtl8192cu_hal_xmitframe_enqueue;
++
++	//pHalFunc->read_bbreg = &rtl8192c_PHY_QueryBBReg;
++	//pHalFunc->write_bbreg = &rtl8192c_PHY_SetBBReg;
++	//pHalFunc->read_rfreg = &rtl8192c_PHY_QueryRFReg;
++	//pHalFunc->write_rfreg = &rtl8192c_PHY_SetRFReg;
++
++#ifdef CONFIG_HOSTAPD_MLME
++	pHalFunc->hostap_mgnt_xmit_entry = &rtl8192cu_hostap_mgnt_xmit_entry;
++#endif
++	pHalFunc->interface_ps_func = &rtl8192cu_ps_func;
++
++	rtl8192c_set_hal_ops(pHalFunc);
++_func_exit_;
++
++}
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/usb_ops_ce.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/usb_ops_ce.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/usb_ops_ce.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/usb_ops_ce.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,1207 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _HCI_OPS_OS_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <osdep_intf.h>
++
++#ifndef PLATFORM_OS_CE
++    #error "PLATFORM_OS_CE shall be set \n"
++#endif
++
++#ifndef CONFIG_USB_HCI
++	#error "CONFIG_USB_HCI shall be on!\n"
++#endif
++
++#include <usb_ops.h>
++#include <recv_osdep.h>
++
++#include <circ_buf.h>
++
++
++struct zero_bulkout_context
++{
++	void *pbuf;
++	void *purb;
++	void *pirp;
++	void *padapter;
++};
++
++
++
++#define PUSB_ERROR LPDWORD
++#define USBD_HALTED(Status) ((ULONG)(Status) >> 30 == 3)
++
++
++USB_PIPE ffaddr2pipehdl(struct dvobj_priv *pNdisCEDvice, u32 addr);
++
++
++static NTSTATUS usb_async_interrupt_in_complete( LPVOID Context );
++static NTSTATUS usb_async_interrupt_out_complete( LPVOID Context );
++
++DWORD usb_write_port_complete( LPVOID Context );
++DWORD usb_read_port_complete( LPVOID Context );
++
++void usb_read_mem(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *rmem)
++{
++_func_enter_;
++	RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("%s(%u)\n",__FUNCTION__, __LINE__));
++_func_exit_;
++}
++
++
++
++BOOL
++CloseTransferHandle(
++    LPCUSB_FUNCS   pUsbFuncs,
++    USB_TRANSFER   hTransfer
++    )
++{
++    BOOL bRc = TRUE;
++
++    // This assert may fail on suprise remove,
++    // but should pass during normal I/O.
++    // ASSERT( pUsbFuncs->lpIsTransferComplete(hTransfer) ); 
++
++    // CloseTransfer aborts any pending transfers
++    if ( !pUsbFuncs->lpCloseTransfer(hTransfer) ) {
++     
++	RT_TRACE( _module_hci_ops_os_c_, _drv_err_, ("*** CloseTransfer ERROR:%d ***\n", GetLastError()));	
++        bRc = FALSE;
++    }
++
++    return bRc;
++}
++
++
++BOOL
++GetTransferStatus(
++    LPCUSB_FUNCS   pUsbFuncs,
++    USB_TRANSFER   hTransfer,
++    LPDWORD        pBytesTransferred , // OPTIONAL returns number of bytes transferred
++    PUSB_ERROR     pUsbError  	 // returns USB error code
++    )
++{
++
++    BOOL bRc = TRUE;
++
++    if ( pUsbFuncs->lpGetTransferStatus(hTransfer, pBytesTransferred, pUsbError) ) {
++        if ( USB_NO_ERROR != *pUsbError ) {
++		RT_TRACE( _module_hci_ops_os_c_, _drv_err_, ("*** CloseTransfer ERROR:%d ***\n", GetLastError()));		
++            RT_TRACE( _module_hci_ops_os_c_, _drv_err_, ("GetTransferStatus (BytesTransferred:%d, UsbError:0x%x)\n", pBytesTransferred?*pBytesTransferred:-1, pUsbError?*pUsbError:-1 )); 
++        }
++    } else {
++        RT_TRACE( _module_hci_ops_os_c_, _drv_err_,("*** GetTransferStatus ERROR:%d ***\n", GetLastError())); 
++        *pUsbError = USB_CANCELED_ERROR;
++        bRc = FALSE;
++    }
++
++    return bRc;
++}
++
++
++// The driver should never read RxCmd register. We have to set
++// RCR CMDHAT0 (bit6) to append Rx status before the Rx frame.
++//
++// |<--------  pBulkUrb->TransferBufferLength  ------------>|
++// +------------------+-------------------+------------+
++//  | Rx status (16 bytes)  | Rx frame .....             | CRC(4 bytes) |
++// +------------------+-------------------+------------+
++// ^
++// ^pRfd->Buffer.VirtualAddress
++//
++/*! \brief USB RX IRP Complete Routine.
++	@param Context pointer of RT_RFD
++*/
++u32 usb_read_port(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *rmem)
++{
++    struct intf_priv	*pintfpriv		= pintfhdl->pintfpriv;
++    struct dvobj_priv	*pdvobj_priv	= (struct dvobj_priv*)pintfpriv->intf_dev;
++    _adapter			*adapter		= (_adapter *)pdvobj_priv->padapter;
++
++	struct recv_priv	*precvpriv	= &adapter->recvpriv;
++
++	struct recv_buf		*precvbuf	= (struct recv_buf *)rmem;
++	DWORD dwErr = ERROR_SUCCESS ;
++	DWORD dwBytesTransferred = 0 ;
++	USB_TRANSFER hTransfer = NULL;
++	USB_PIPE	hPipe;
++	LPCUSB_FUNCS usb_funcs_vp = pdvobj_priv->usb_extension._lpUsbFuncs;
++
++_func_enter_;
++	RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("usb_read_port(%u)\n", __LINE__));
++
++#if (CONFIG_PWRCTRL == 1)
++    if (adapter->pwrctrlpriv.pnp_bstop_trx)
++	{
++        return _FALSE;
++    }
++#endif
++
++	if(adapter->bDriverStopped || adapter->bSurpriseRemoved) 
++	{
++		RT_TRACE(_module_hci_ops_os_c_, _drv_info_,("usb_read_port:( padapter->bDriverStopped ||padapter->bSurpriseRemoved)!!!\n"));
++		return _FALSE;
++	}
++
++	if(precvbuf !=NULL)
++	{
++
++		// get a recv buffer
++		rtl8192cu_init_recvbuf(adapter, precvbuf);
++	
++
++
++		_rtw_spinlock(&precvpriv->lock);
++		precvpriv->rx_pending_cnt++;
++		precvbuf->irp_pending = _TRUE;
++		_rtw_spinunlock(&precvpriv->lock);
++
++
++		//translate DMA FIFO addr to pipehandle
++		hPipe = ffaddr2pipehdl(pdvobj_priv, addr);
++		
++
++		RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("usb_read_port(%u)\n", __LINE__));
++
++		precvbuf->usb_transfer_read_port = (*usb_funcs_vp->lpIssueBulkTransfer)(
++			hPipe,
++			usb_read_port_complete,
++			precvbuf,
++			USB_IN_TRANSFER|USB_SHORT_TRANSFER_OK,
++			MAX_RECVBUF_SZ,
++			precvbuf->pbuf,
++			0);
++
++
++		if(precvbuf->usb_transfer_read_port)
++		{
++			
++		//	  GetTransferStatus(usb_funcs_vp, hTransfer, &dwBytesTransferred,&UsbRc);
++
++		//	  CloseTransferHandle(usb_funcs_vp, hTransfer);
++
++		}
++		else
++		{
++
++			dwErr = GetLastError();
++			//RT_TRACE( _module_hci_ops_os_c_, _drv_err_, ("usb_read_port ERROR : %d\n", dwErr));		 
++
++		}
++
++//	 	if (  USB_NO_ERROR != UsbRc && ERROR_SUCCESS == dwErr) {
++//	        dwErr = ERROR_GEN_FAILURE;
++//	    }
++
++
++		if ( ERROR_SUCCESS != dwErr ) {
++
++			SetLastError(dwErr);
++			RT_TRACE( _module_hci_ops_os_c_, _drv_err_, ("usb_read_port ERROR : %d\n", dwErr));	
++		}
++	
++		RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("-usb_read_port(%u)\n", __LINE__));
++
++	}
++	else // if(precvbuf !=NULL)
++	{
++		
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port:precv_frame ==NULL\n"));
++	}
++
++	return _TRUE;
++
++}
++
++DWORD usb_read_port_complete( PVOID context )
++{
++	struct recv_buf 	*precvbuf	= (struct recv_buf *)context;
++	_adapter			*adapter	= (_adapter *)precvbuf->adapter;
++	struct recv_priv	*precvpriv	= &adapter->recvpriv;
++
++
++	struct intf_hdl		*pintfhdl = &adapter->pio_queue->intf;
++    struct intf_priv	*pintfpriv    = pintfhdl->pintfpriv;
++    struct dvobj_priv	*pdvobj_priv  = (struct dvobj_priv*)pintfpriv->intf_dev;
++
++
++	LPCUSB_FUNCS usb_funcs_vp = pdvobj_priv->usb_extension._lpUsbFuncs;
++
++    DWORD dwBytesTransferred    = 0;
++    DWORD dwErr                 = USB_CANCELED_ERROR;
++
++	uint isevt, *pbuf;
++	int fComplete =_FALSE;
++
++
++	RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("usb_read_port_complete(%u)\n", __LINE__));
++
++_func_enter_;
++
++
++	_rtw_spinlock_ex(&precvpriv->lock);
++	precvbuf->irp_pending=_FALSE;
++	precvpriv->rx_pending_cnt --;
++	_rtw_spinunlock_ex(&precvpriv->lock);	
++
++
++#if 1
++		
++	(*usb_funcs_vp->lpGetTransferStatus)(precvbuf->usb_transfer_read_port, &dwBytesTransferred, &dwErr);
++	fComplete = (*usb_funcs_vp->lpIsTransferComplete)(precvbuf->usb_transfer_read_port);
++	if(fComplete!=_TRUE)
++	{
++		RT_TRACE( _module_hci_ops_os_c_, _drv_err_, ("usb_read_port_complete CloseTransfer before complete\n"));
++	}
++	(*usb_funcs_vp->lpCloseTransfer)(precvbuf->usb_transfer_read_port);
++	
++	
++#endif
++
++
++	if(USB_NO_ERROR != dwErr)
++		RT_TRACE( _module_hci_ops_os_c_, _drv_err_, ("usb_read_port_complete Fail :%d\n",dwErr));
++	
++	{
++
++		if ( dwBytesTransferred > MAX_RECVBUF_SZ || dwBytesTransferred < RXDESC_SIZE )
++		{
++			RT_TRACE(_module_hci_ops_os_c_,_drv_err_,
++				("\n usb_read_port_complete: (pbulkurb->TransferBufferLength > MAX_RECVBUF_SZ) || (pbulkurb->TransferBufferLength < RXDESC_SIZE): %d\n",dwBytesTransferred));
++			rtw_read_port(adapter, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf);
++
++    	    //usb_read_port(pintfhdl, 0, 0, (unsigned char *)precvframe);
++    	}
++		else
++		{
++			precvbuf->transfer_len = dwBytesTransferred;
++
++			pbuf = (uint*)precvbuf->pbuf;
++
++			if((isevt = *(pbuf+1)&0x1ff) == 0x1ff)
++			{
++				RT_TRACE(_module_hci_ops_os_c_,_drv_info_,
++					("\n usb_read_port_complete: get a event\n"));
++				rxcmd_event_hdl(adapter, pbuf);//rx c2h events
++
++				rtw_read_port(adapter, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf);
++			}
++			else
++			{
++				if(recvbuf2recvframe(adapter, precvbuf)==_FAIL)//rx packets
++				{
++					//precvbuf->reuse = _TRUE;		
++					rtw_read_port(adapter, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf);
++				}
++			}
++	    }
++	}
++
++	RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("-usb_read_port_complete(%u)\n", __LINE__));
++
++_func_exit_;
++	return ERROR_SUCCESS;
++//	return STATUS_MORE_PROCESSING_REQUIRED;
++}
++
++void usb_read_port_cancel(_adapter *padapter){
++	RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("usb_read_port_cancel(%u)\n",__FUNCTION__, __LINE__));
++}
++
++DWORD usb_write_mem_complete( LPVOID Context )
++{
++	int fComplete =_FALSE;
++	DWORD	dwBytes 	= 0;
++	DWORD	dwErr		= USB_CANCELED_ERROR;
++
++	_irqL irqL;
++	_list	*head;
++	_list *plist;
++	struct io_req	*pio_req;	
++	struct io_queue *pio_q = (struct io_queue *) Context;
++	struct intf_hdl *pintf = &(pio_q->intf);	
++	struct intf_priv *pintfpriv = pintf->pintfpriv;	
++	_adapter *padapter = (_adapter *)pintf->adapter;
++	NTSTATUS status = STATUS_SUCCESS;
++    struct xmit_priv * pxmitpriv	= &padapter->xmitpriv;
++
++	struct dvobj_priv * pdvobj_priv	= (struct dvobj_priv*)pintfpriv->intf_dev;
++
++    USB_HANDLE		usbHandle		= pdvobj_priv->usb_extension._hDevice;
++    LPCUSB_FUNCS	usb_funcs_vp	= pdvobj_priv->usb_extension._lpUsbFuncs;
++
++	// get the head from the processing io_queue
++	head = &(pio_q->processing);
++	
++_func_enter_;
++	RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("+usb_write_mem_complete %p\n", Context));
++
++#if 1
++	_enter_critical_bh(&(pio_q->lock), &irqL);
++	
++
++	//free irp in processing list...	
++	while(rtw_is_list_empty(head) != _TRUE)
++	{
++		plist = get_next(head);	
++		rtw_list_delete(plist);
++		pio_req = LIST_CONTAINOR(plist, struct io_req, list);
++		_rtw_up_sema(&pio_req->sema);
++	}
++
++	_exit_critical_bh(&(pio_q->lock), &irqL);
++#endif
++
++
++#if 1
++		
++	(*usb_funcs_vp->lpGetTransferStatus)(pio_req->usb_transfer_write_mem , &dwBytes, &dwErr);
++	fComplete = (*usb_funcs_vp->lpIsTransferComplete)(pio_req->usb_transfer_write_mem);
++	if(fComplete!=_TRUE)
++	{
++		RT_TRACE( _module_hci_ops_os_c_, _drv_err_, ("usb_write_mem_complete CloseTransfer before complete\n"));
++	}
++	(*usb_funcs_vp->lpCloseTransfer)(pio_req->usb_transfer_write_mem );
++	
++#endif
++	
++	RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("-usb_write_mem_complete\n"));
++
++_func_exit_;
++
++
++	return STATUS_MORE_PROCESSING_REQUIRED;
++
++}
++
++
++void usb_write_mem(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *wmem)
++{
++
++	NTSTATUS NtStatus = STATUS_SUCCESS;
++    USB_PIPE	hPipe;
++	_irqL	irqL;
++
++	int 	fComplete	= _FALSE;
++	DWORD	dwBytes 	= 0;
++	DWORD	dwErr		= USB_CANCELED_ERROR;
++
++
++	struct io_req 		*pio_req;
++
++	_adapter 			*adapter 	= (_adapter *)pintfhdl->adapter;
++	struct intf_priv 	*pintfpriv	= pintfhdl->pintfpriv;
++	struct dvobj_priv   * pdvobj_priv   = (struct dvobj_priv*)pintfpriv->intf_dev;
++
++	 
++    struct xmit_priv	*pxmitpriv	= &adapter->xmitpriv;
++	struct io_queue 	*pio_queue 	= (struct io_queue *)adapter->pio_queue; 
++
++	LPCUSB_FUNCS usb_funcs_vp = pdvobj_priv->usb_extension._lpUsbFuncs;
++
++
++_func_enter_;
++	RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("usb_write_mem(%u) pintfhdl %p wmem %p\n", __LINE__, pintfhdl, wmem));
++
++	// fetch a io_request from the io_queue
++	pio_req = alloc_ioreq(pio_queue);
++		
++	if ((pio_req == NULL)||(adapter->bSurpriseRemoved))
++	{
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("async_irp_write32 : pio_req =0x%x adapter->bSurpriseRemoved=0x%x",pio_req,adapter->bSurpriseRemoved ));
++		goto exit;
++	}	
++
++	_enter_critical_bh(&(pio_queue->lock), &irqL);
++
++
++	// insert the io_request into processing io_queue
++	rtw_list_insert_tail(&(pio_req->list),&(pio_queue->processing));
++	
++	
++	if((adapter->bDriverStopped) || (adapter->bSurpriseRemoved) ||(adapter->pwrctrlpriv.pnp_bstop_trx)) 
++	{
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\npadapter->pwrctrlpriv.pnp_bstop_trx==_TRUE\n"));
++		goto exit;
++	}
++	
++	//translate DMA FIFO addr to pipehandle
++	hPipe = ffaddr2pipehdl(pdvobj_priv, addr);	
++
++	RT_TRACE( _module_hci_ops_os_c_, _drv_info_,("usb_write_mem(%u)\n",__LINE__));
++
++	pio_req->usb_transfer_write_mem = (*usb_funcs_vp->lpIssueBulkTransfer)(
++		hPipe,
++		usb_write_mem_complete, 
++		pio_queue,
++		USB_OUT_TRANSFER,
++		cnt,
++		wmem,
++		0);
++
++#if 0
++
++	(*usb_funcs_vp->lpGetTransferStatus)(pio_req->usb_transfer_write_mem , &dwBytes, &dwErr);
++
++	while( fComplete != _TRUE)
++	{
++		fComplete = (*usb_funcs_vp->lpIsTransferComplete)(pio_req->usb_transfer_write_mem);
++		if(fComplete==_TRUE)
++		{
++			(*usb_funcs_vp->lpCloseTransfer)(pio_req->usb_transfer_write_mem );
++			RT_TRACE( _module_hci_ops_os_c_, _drv_err_, ("usb_write_mem finished\n"));
++			break;
++		}
++		else
++		{
++			RT_TRACE( _module_hci_ops_os_c_, _drv_err_, 
++				("usb_write_mem not yet finished %X\n", 
++				pio_req->usb_transfer_write_mem));
++			rtw_msleep_os(10);
++		}
++		
++	}
++
++#endif
++
++
++//	_rtw_down_sema(&pio_req->sema);	
++
++	RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("-usb_write_mem(%X)\n",pio_req->usb_transfer_write_mem));
++
++	_exit_critical_bh(&(pio_queue->lock), &irqL);
++
++	_rtw_down_sema(&pio_req->sema); 
++	free_ioreq(pio_req, pio_queue);
++
++exit:
++_func_exit_;
++	return;
++}
++
++u32 usb_write_cnt=0;
++u32 usb_complete_cnt=0;
++
++USB_PIPE ffaddr2pipehdl(struct dvobj_priv *pNdisCEDvice, u32 addr)
++{
++	USB_PIPE	PipeHandle = NULL;
++	_adapter	*padapter = pNdisCEDvice->padapter;
++
++	
++	if(pNdisCEDvice->nr_endpoint == 11)
++	{		
++		switch(addr)
++		{	    
++	     		case RTL8712_DMA_BEQ:
++		 		PipeHandle= padapter->halpriv.pipehdls_r8712[3] ; 
++				break;
++	     		case RTL8712_DMA_BKQ:
++			 	PipeHandle=  padapter->halpriv.pipehdls_r8712[4]; 
++				break;
++	     		case RTL8712_DMA_VIQ:
++		 		PipeHandle=  padapter->halpriv.pipehdls_r8712[2]; 
++				break;
++	    		case RTL8712_DMA_VOQ:
++				PipeHandle=  padapter->halpriv.pipehdls_r8712[1]; 
++				break;					
++                     case RTL8712_DMA_BCNQ:	
++				PipeHandle=  padapter->halpriv.pipehdls_r8712[6]; 
++				break;	 	
++			case RTL8712_DMA_BMCQ:	//HI Queue
++				PipeHandle=  padapter->halpriv.pipehdls_r8712[7]; 
++				break;	
++			case RTL8712_DMA_MGTQ:				
++		 		PipeHandle=  padapter->halpriv.pipehdls_r8712[8]; 
++				break;
++                     case RTL8712_DMA_RX0FF:
++				PipeHandle=  padapter->halpriv.pipehdls_r8712[0]; 
++				break;	 	
++			case RTL8712_DMA_C2HCMD:		 	
++				PipeHandle=  padapter->halpriv.pipehdls_r8712[5]; 
++				break;
++			case RTL8712_DMA_H2CCMD:
++				PipeHandle=  padapter->halpriv.pipehdls_r8712[9]; 
++				break;	
++				
++		}
++
++	}
++	else if(pNdisCEDvice->nr_endpoint == 6)
++	{
++		switch(addr)
++		{	    
++			case RTL8712_DMA_BEQ:
++		 		PipeHandle=  padapter->halpriv.pipehdls_r8712[3]; 
++				break;
++	     	case RTL8712_DMA_BKQ:
++			 	PipeHandle=  padapter->halpriv.pipehdls_r8712[4]; 
++				break;
++	     	case RTL8712_DMA_VIQ:
++		 		PipeHandle=  padapter->halpriv.pipehdls_r8712[2]; 
++				break;
++	    	case RTL8712_DMA_VOQ:                   		
++		 		PipeHandle=  padapter->halpriv.pipehdls_r8712[1]; 
++				break;
++			case RTL8712_DMA_RX0FF:
++			case RTL8712_DMA_C2HCMD:		 	
++				PipeHandle=  padapter->halpriv.pipehdls_r8712[0]; 
++				break;
++			case RTL8712_DMA_H2CCMD:
++			case RTL8712_DMA_BCNQ:					
++			case RTL8712_DMA_BMCQ:	
++			case RTL8712_DMA_MGTQ:			
++				PipeHandle=  padapter->halpriv.pipehdls_r8712[5]; 
++				break;	
++				
++		}
++
++	}
++	else if(pNdisCEDvice->nr_endpoint == 4)
++	{
++		switch(addr)
++		{	    
++	     	case RTL8712_DMA_BEQ:
++		 	case RTL8712_DMA_BKQ:
++			 	PipeHandle=  padapter->halpriv.pipehdls_r8712[2]; 
++				break;
++     		case RTL8712_DMA_VIQ:
++		 	case RTL8712_DMA_VOQ:					
++		 		PipeHandle=  padapter->halpriv.pipehdls_r8712[1]; 
++				break;
++			case RTL8712_DMA_RX0FF:
++			case RTL8712_DMA_C2HCMD:		 	
++				PipeHandle=  padapter->halpriv.pipehdls_r8712[0]; 
++				break;
++			case RTL8712_DMA_H2CCMD:	
++			case RTL8712_DMA_BCNQ:					
++			case RTL8712_DMA_BMCQ:	
++			case RTL8712_DMA_MGTQ:				
++				PipeHandle=  padapter->halpriv.pipehdls_r8712[3]; 
++				break;	
++		}
++	
++	}
++	else
++	{
++	   RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("ffaddr2pipehdl():nr_endpoint=%d error!\n", pNdisCEDvice->nr_endpoint));	   
++	}
++		
++	return PipeHandle;
++
++}
++
++DWORD usb_bulkout_zero_complete( LPVOID pZeroContext )
++{
++	struct zero_bulkout_context *pcontext = (struct zero_bulkout_context *)pZeroContext;
++	_adapter * padapter = pcontext->padapter;
++    struct dvobj_priv *	pdvobj_priv = (struct dvobj_priv *)&padapter->dvobjpriv;
++	LPCUSB_FUNCS usb_funcs_vp = pdvobj_priv->usb_extension._lpUsbFuncs;
++	struct xmit_priv  * pxmitpriv	= &padapter->xmitpriv;
++
++	int 	fComplete			=_FALSE;
++	DWORD	dwBytesTransferred	= 0;
++	DWORD	dwErr				= USB_CANCELED_ERROR;
++
++_func_enter_;
++
++#if 1
++				
++	(*usb_funcs_vp->lpGetTransferStatus)(pxmitpriv->usb_transfer_write_port, &dwBytesTransferred, &dwErr);
++	fComplete = (*usb_funcs_vp->lpIsTransferComplete)(pxmitpriv->usb_transfer_write_port);
++	if(fComplete!=_TRUE)
++	{
++		RT_TRACE( _module_hci_ops_os_c_, _drv_err_, ("usb_bulkout_zero_complete CloseTransfer before complete\n"));
++	}
++	(*usb_funcs_vp->lpCloseTransfer)(pxmitpriv->usb_transfer_write_port);
++	
++#endif
++
++	if(pcontext)
++	{
++		if(pcontext->pbuf)
++		{			
++			rtw_mfree(pcontext->pbuf, sizeof(int));	
++		}	
++
++		rtw_mfree((u8*)pcontext, sizeof(struct zero_bulkout_context));	
++	}	
++
++_func_exit_;
++
++	return ERROR_SUCCESS;
++	
++
++}
++
++u32 usb_bulkout_zero(struct intf_hdl *pintfhdl, u32 addr)
++{	
++	struct zero_bulkout_context *pcontext;
++	unsigned char *pbuf;
++	u8 len = 0 ;
++	_adapter *padapter = (_adapter *)pintfhdl->adapter;
++	struct dvobj_priv	*pdvobj = (struct dvobj_priv *)&padapter->dvobjpriv;	
++	struct xmit_priv	* pxmitpriv     = &padapter->xmitpriv;
++     
++
++	LPCUSB_FUNCS usb_funcs_vp = pdvobj->usb_extension._lpUsbFuncs;
++
++	USB_PIPE	hPipe;
++
++_func_enter_;
++
++	if((padapter->bDriverStopped) || (padapter->bSurpriseRemoved) ||(padapter->pwrctrlpriv.pnp_bstop_trx))
++	{		
++		return _FAIL;
++	}
++
++
++	pcontext = (struct zero_bulkout_context *)rtw_zmalloc(sizeof(struct zero_bulkout_context));
++
++	pbuf = (unsigned char *)rtw_zmalloc(sizeof(int));	
++
++	len = 0;
++	
++	pcontext->pbuf = pbuf;
++	pcontext->purb = NULL;
++	pcontext->pirp = NULL;
++	pcontext->padapter = padapter;
++                    
++
++//translate DMA FIFO addr to pipehandle
++	hPipe = ffaddr2pipehdl(pdvobj, addr);
++
++
++
++
++	pxmitpriv->usb_transfer_write_port = (*usb_funcs_vp->lpIssueBulkTransfer)(
++						        hPipe, usb_bulkout_zero_complete, 
++						        pcontext, USB_OUT_TRANSFER,
++					    	    len, pbuf, 0);
++
++	
++_func_exit_;
++	
++	return _SUCCESS;
++
++}
++
++u32 usb_write_port(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *wmem)
++{
++
++    u32	i, bwritezero = _FALSE;
++	u32	ac_tag = addr;
++
++    u8*	ptr;
++
++	struct intf_priv    * pintfpriv     = pintfhdl->pintfpriv;
++	struct dvobj_priv   * pdvobj_priv   = (struct dvobj_priv*)pintfpriv->intf_dev;
++	_adapter            * padapter      = pdvobj_priv->padapter;
++
++    struct xmit_priv	* pxmitpriv     = &padapter->xmitpriv;
++    struct xmit_frame   * pxmitframe    = (struct xmit_frame *)wmem;
++
++	LPCUSB_FUNCS usb_funcs_vp = pdvobj_priv->usb_extension._lpUsbFuncs;
++
++    USB_PIPE	hPipe;
++
++	u32			bResult = _FALSE;
++
++_func_enter_;
++	RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("+usb_write_port\n"));
++
++#if (CONFIG_PWRCTRL == 1)
++    if(padapter->pwrctrlpriv.pnp_bstop_trx==_TRUE){
++       	RT_TRACE( _module_hci_ops_os_c_, _drv_err_, ("\npadapter->pwrctrlpriv.pnp_bstop_trx==_TRUE\n"));
++
++    }
++#endif
++
++	if((padapter->bDriverStopped) || (padapter->bSurpriseRemoved) ||(padapter->pwrctrlpriv.pnp_bstop_trx))
++	{
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port:( padapter->bDriverStopped ||padapter->bSurpriseRemoved ||adapter->pwrctrlpriv.pnp_bstop_trx)!!!\n"));
++		bResult = _FALSE;
++		goto exit;
++	}
++
++	RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("usb_write_port(%u)\n", __LINE__));
++
++	for(i=0; i<8; i++)
++	{
++		if(pxmitframe->bpending[i] == _FALSE)
++		{
++			_rtw_spinlock(&pxmitpriv->lock);	
++			pxmitpriv->txirp_cnt++;
++			pxmitframe->bpending[i]  = _TRUE;
++			_rtw_spinunlock(&pxmitpriv->lock);
++			
++			pxmitframe->sz[i] = cnt;
++			pxmitframe->ac_tag[i] = ac_tag;
++
++			break;
++		}
++	}	
++
++
++	//TODO:
++	if (pdvobj_priv->ishighspeed)
++	{
++		if(cnt> 0 && cnt%512 == 0)
++		{
++			RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("ishighspeed, cnt=%d\n", cnt));
++		//	cnt=cnt+1;
++			bwritezero = _TRUE;
++
++		}	
++	}
++	else
++	{
++		if(cnt > 0 && cnt%64 == 0)
++		{
++			RT_TRACE(_module_hci_ops_os_c_,_drv_info_,("cnt=%d\n", cnt));
++		//	cnt=cnt+1;
++			bwritezero = _TRUE;
++
++		}	
++	}
++
++	RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("usb_write_port: pipe handle convert\n"));
++
++	//translate DMA FIFO addr to pipehandle
++	hPipe = ffaddr2pipehdl(pdvobj_priv, addr);
++
++
++#if 0
++	// for tx fifo, the maximum payload number is 8,
++	// we workaround this issue here by separate whole fifo into 8 segments.
++	if (cnt <= 500)
++		cnt = 500;
++#endif
++
++	RT_TRACE( _module_hci_ops_os_c_, _drv_info_,
++		("usb_write_port(%u): pxmitframe %X  pxmitframe->padapter %X\n",__LINE__, pxmitframe, pxmitframe->padapter));
++
++	pxmitpriv->usb_transfer_write_port = (*usb_funcs_vp->lpIssueBulkTransfer)(
++						        hPipe, usb_write_port_complete, 
++						        pxmitframe, USB_OUT_TRANSFER,
++					    	    cnt, pxmitframe->mem_addr, 0);
++
++	RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("%s(%u)\n",__FUNCTION__, __LINE__));
++
++	ptr=(u8 *)&pxmitframe->mem;
++
++#if 0
++	if (pdvobj_priv->ishighspeed)
++	{
++		ptr=ptr+512;
++	}
++	else
++	{
++		ptr=ptr+64;
++
++	}
++#endif
++	if(bwritezero == _TRUE)
++	{
++		usb_bulkout_zero(pintfhdl, addr);
++	}
++
++//	if (!pxmitframe->usb_transfer_xmit)
++//	    padapter->bSurpriseRemoved=_TRUE;
++
++	RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("%s(%u)\n",__FUNCTION__, __LINE__));
++	bResult = _SUCCESS;
++
++exit:
++_func_exit_;
++	return bResult;
++}
++
++DWORD usb_write_port_complete( LPVOID Context )
++{
++
++//    u8 *ptr;
++
++    struct xmit_frame *	pxmitframe  = (struct xmit_frame *) Context;
++    _adapter          * padapter    = pxmitframe->padapter;
++    struct dvobj_priv *	pdvobj_priv = (struct dvobj_priv *)&padapter->dvobjpriv;
++	struct xmit_priv  * pxmitpriv   = &padapter->xmitpriv;
++	struct xmit_buf *pxmitbuf = pxmitframe->pxmitbuf;
++	LPCUSB_FUNCS usb_funcs_vp = pdvobj_priv->usb_extension._lpUsbFuncs;
++
++	int		fComplete			=_FALSE;
++	DWORD	dwBytesTransferred	= 0;
++	DWORD	dwErr				= USB_CANCELED_ERROR;
++
++	RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("%s(%u), pxmitframe %X\n",__FUNCTION__, __LINE__, Context));
++
++_func_enter_;
++
++	RT_TRACE(_module_hci_ops_os_c_,_drv_info_,("+usb_write_port_complete\n"));
++
++	_rtw_spinlock_ex(&pxmitpriv->lock);	
++	pxmitpriv->txirp_cnt--;
++	_rtw_spinunlock_ex(&pxmitpriv->lock);
++
++	if(pxmitpriv->txirp_cnt==0){
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete: txirp_cnt== 0, set allrxreturnevt!\n"));		
++		_rtw_up_sema(&(pxmitpriv->tx_retevt));
++	}
++
++
++	//not to consider tx fragment
++	rtw_free_xmitframe(pxmitpriv, pxmitframe);		
++
++
++#if 1
++			
++	(*usb_funcs_vp->lpGetTransferStatus)(pxmitpriv->usb_transfer_write_port, &dwBytesTransferred, &dwErr);
++	fComplete = (*usb_funcs_vp->lpIsTransferComplete)(pxmitpriv->usb_transfer_write_port);
++	if(fComplete!=_TRUE)
++	{
++		RT_TRACE( _module_hci_ops_os_c_, _drv_err_, ("usb_write_port_complete CloseTransfer before complete\n"));
++	}
++	(*usb_funcs_vp->lpCloseTransfer)(pxmitpriv->usb_transfer_write_port);
++
++#else
++
++	if((*usb_funcs_vp->lpIsTransferComplete)(pxmitpriv->usb_transfer_write_port))
++	{
++		(*usb_funcs_vp->lpCloseTransfer)(pxmitpriv->usb_transfer_write_port);
++	}
++
++#endif
++
++	RT_TRACE( _module_hci_ops_os_c_, _drv_info_, 
++		("%s(%u): pxmitpriv %X pxmitpriv->free_xmitframe_cnt %X pxmitframe->padapter %X pxmitframe->padapter %X\n", 
++		__LINE__, pxmitpriv, pxmitpriv->free_xmitframe_cnt, pxmitframe->padapter));
++
++    rtl8192cu_xmitframe_complete(padapter, pxmitpriv, pxmitbuf);
++
++_func_exit_;
++
++    return STATUS_SUCCESS;
++}
++
++DWORD usb_write_scsi_complete(LPVOID pTxContext) 
++{
++#ifndef PLATFORM_OS_CE
++	struct SCSI_BUFFER_ENTRY *psb_entry = (struct SCSI_BUFFER_ENTRY *)pTxContext;
++	_adapter 				 *padapter 	= psb_entry->padapter;
++	struct SCSI_BUFFER 		 *psb 		= padapter->pscsi_buf;
++	struct xmit_priv 		 *pxmitpriv = &(padapter->xmitpriv);
++    struct dvobj_priv 		*pdvobj_priv = (struct dvobj_priv *)&padapter->dvobjpriv;
++	LPCUSB_FUNCS 		  	 lpUsbFuncs = pdvobj_priv->pUsbExtension->_lpUsbFuncs;
++
++	int 	fComplete			=_FALSE;
++	DWORD	dwBytesTransferred	= 0;
++	DWORD	dwErr				= USB_CANCELED_ERROR;
++
++_func_enter_;
++	RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("%s(%u): circ_space = %d\n",__FUNCTION__, __LINE__, CIRC_SPACE( psb->head,psb->tail,  SCSI_BUFFER_NUMBER)));
++
++#if 1
++				
++	(*lpUsbFuncs->lpGetTransferStatus)(psb_entry->usb_transfer_scsi_txcmd, &dwBytesTransferred, &dwErr);
++	fComplete = (*lpUsbFuncs->lpIsTransferComplete)(psb_entry->usb_transfer_scsi_txcmd);
++	if(fComplete!=_TRUE)
++	{
++		RT_TRACE( _module_hci_ops_os_c_, _drv_err_, ("usb_write_scsi_complete CloseTransfer before complete\n"));
++	}
++	(*lpUsbFuncs->lpCloseTransfer)(psb_entry->usb_transfer_scsi_txcmd);
++	
++#else
++
++	if((*lpUsbFuncs->lpIsTransferComplete)(psb_entry->usb_transfer_scsi_txcmd))
++		(*lpUsbFuncs->lpCloseTransfer)(psb_entry->usb_transfer_scsi_txcmd);
++#endif
++
++	memset(psb_entry->entry_memory, 0, 8);
++
++	RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("%s(%u)\n",__FUNCTION__, __LINE__));
++	if((psb->tail+1)==SCSI_BUFFER_NUMBER)
++		psb->tail=0;
++	else 
++		psb->tail++;
++
++	RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("%s(%u)\n",__FUNCTION__, __LINE__));
++	if(CIRC_CNT(psb->head,psb->tail,SCSI_BUFFER_NUMBER)==0){
++		RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("write_txcmd_scsififo_callback: up_sema\n"));
++		_rtw_up_sema(&pxmitpriv->xmit_sema);
++	}
++
++	RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("%s(%u)\n",__FUNCTION__, __LINE__));
++	if(padapter->bSurpriseRemoved) {
++		return STATUS_MORE_PROCESSING_REQUIRED;
++	}
++
++_func_exit_;
++#endif
++	RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("%s(%u)\n",__FUNCTION__, __LINE__));
++	return STATUS_MORE_PROCESSING_REQUIRED;
++}
++
++uint usb_write_scsi(struct intf_hdl *pintfhdl, u32 cnt, u8 *wmem)
++{
++
++#ifndef PLATFORM_OS_CE
++
++	_adapter 		  *padapter = (_adapter *)pintfhdl->adapter;
++	struct dvobj_priv *pdev 	= (struct dvobj_priv*)&padapter->dvobjpriv;
++
++	struct SCSI_BUFFER       *psb      =padapter->pscsi_buf;
++	struct SCSI_BUFFER_ENTRY *psb_entry=LIST_CONTAINOR(wmem,struct SCSI_BUFFER_ENTRY,entry_memory);
++
++_func_enter_;
++	if(padapter->bSurpriseRemoved||padapter->bDriverStopped)
++		return 0;
++	
++	RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("%s(%u)\n",__FUNCTION__, __LINE__));
++	psb_entry->usb_transfer_scsi_txcmd=pdev->pUsbExtension->_lpUsbFuncs->lpIssueBulkTransfer(
++			pdev->scsi_out_pipehandle,
++			usb_write_scsi_complete,
++			psb_entry,
++			USB_OUT_TRANSFER,
++			cnt,
++			wmem,
++			0);
++	
++_func_exit_;
++#endif
++
++   return _SUCCESS;  
++}
++
++
++/*
++ */
++uint usb_init_intf_priv(struct intf_priv *pintfpriv)
++{
++	// get the dvobj_priv object
++	struct dvobj_priv * pNdisCEDvice = (struct dvobj_priv *) pintfpriv->intf_dev;
++
++	RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("%s(%u)\n",__FUNCTION__, __LINE__));
++	// set init intf_priv init status as _IOREADY
++	pintfpriv->intf_status = _IOREADY;
++
++	//  determine the max io size by dvobj_priv.ishighspeed
++	if(pNdisCEDvice->ishighspeed)
++		pintfpriv->max_iosz =  128;
++	else
++		pintfpriv->max_iosz =  64;
++
++	//  read/write size set as 0
++	pintfpriv->io_wsz = 0;
++	pintfpriv->io_rsz = 0;
++
++	//  init io_rwmem buffer
++	pintfpriv->allocated_io_rwmem = rtw_zmalloc(pintfpriv->max_iosz +4);
++	if (pintfpriv->allocated_io_rwmem == NULL)
++	{
++		rtw_mfree((u8 *)(pintfpriv->allocated_io_rwmem), pintfpriv->max_iosz +4);
++		return _FAIL;
++	}
++	else
++	{
++		// word align the io_rwmem
++		pintfpriv->io_rwmem = pintfpriv->allocated_io_rwmem + 4 - ( (u32)(pintfpriv->allocated_io_rwmem) & 3);
++	}
++
++#ifndef PLATFORM_OS_CE
++
++	//  init io_r_mem buffer
++	pintfpriv->allocated_io_r_mem = rtw_zmalloc(pintfpriv->max_iosz +4);
++	if (pintfpriv->allocated_io_r_mem == NULL)
++	{
++		rtw_mfree((u8 *)(pintfpriv->allocated_io_r_mem), pintfpriv->max_iosz +4);
++		return _FAIL;
++	}
++	else
++	{
++		// word align the io_rwmem
++		pintfpriv->io_r_mem = pintfpriv->allocated_io_r_mem + 4 - ( (u32)(pintfpriv->allocated_io_r_mem) & 3);
++	}
++#endif
++
++	return _SUCCESS;
++}
++
++void usb_unload_intf_priv(struct intf_priv *pintfpriv)
++{
++#ifndef PLATFORM_OS_CE
++
++	rtw_mfree((u8 *)(pintfpriv->allocated_io_rwmem), pintfpriv->max_iosz+4);
++	rtw_mfree((u8 *)(pintfpriv->allocated_io_r_mem), pintfpriv->max_iosz+4);
++#endif
++
++	RT_TRACE( _module_hci_ops_os_c_, _drv_info_, ("%s(%u)\n",__FUNCTION__, __LINE__));
++}
++
++
++
++void usb_write_port_cancel(_adapter *padapter)
++{
++
++	sint i,j;
++	struct dvobj_priv   *pdev = &padapter->dvobjpriv;
++	struct xmit_priv *pxmitpriv=&padapter->xmitpriv;
++	struct xmit_frame *pxmitframe;
++
++	_rtw_spinlock(&pxmitpriv->lock);
++	pxmitpriv->txirp_cnt--; //decrease 1 for Initialize ++
++	_rtw_spinunlock(&pxmitpriv->lock);
++	
++	if (pxmitpriv->txirp_cnt) 
++	{
++		// Canceling Pending Recv Irp
++		pxmitframe= (struct xmit_frame *)pxmitpriv->pxmit_frame_buf;
++		
++		for( i = 0; i < NR_XMITFRAME; i++ )
++		{
++			for(j=0;j<8;j++)
++			{
++				if (pxmitframe->bpending[j]==_TRUE)
++				{			
++
++					RT_TRACE(_module_hci_ops_os_c_,_drv_err_,(" usb_write_port_cancel() :IoCancelIrp\n"));
++
++				}
++			}
++			
++			pxmitframe++;
++		}
++
++		_rtw_down_sema(&(pxmitpriv->tx_retevt));
++		
++	}
++
++}
++
++DWORD usbctrl_vendorreq_complete(LPVOID lpvNotifyParameter)
++{
++	struct dvobj_priv  *pdvobjpriv = (struct dvobj_priv*)lpvNotifyParameter;
++
++	RT_TRACE(_module_hci_ops_os_c_,_drv_debug_,("+usbctrl_vendorreq_complete\n"));
++	
++    return STATUS_SUCCESS;
++}
++
++
++int usbctrl_vendorreq(struct intf_priv *pintfpriv, u8 request, u16 value, u16 index, void *pdata, u16 len, u8 requesttype)
++{
++	u8			ret=_TRUE;
++//	NTSTATUS	ntstatus;
++//	int 		fComplete;
++//	LPCUSB_DEVICE		lpDeviceInfo;
++
++	struct dvobj_priv  *pdvobjpriv = (struct dvobj_priv  *)pintfpriv->intf_dev;   
++
++    USB_TRANSFER        usbTrans;
++    USB_DEVICE_REQUEST  usb_device_req;
++    USB_HANDLE      usbHandle   = pdvobjpriv->usb_extension._hDevice;
++    LPCUSB_FUNCS    usbFuncs    = pdvobjpriv->usb_extension._lpUsbFuncs;
++
++	u32	transfer_flags = 0;
++
++	_func_enter_;
++
++    memset( &usb_device_req, 0, sizeof( USB_DEVICE_REQUEST ) );
++
++    if( 0x01 == requesttype )
++	{
++        usb_device_req.bmRequestType = USB_REQUEST_DEVICE_TO_HOST | USB_REQUEST_VENDOR | USB_REQUEST_FOR_DEVICE;
++    }
++	else
++    {
++        usb_device_req.bmRequestType = USB_REQUEST_HOST_TO_DEVICE | USB_REQUEST_VENDOR | USB_REQUEST_FOR_DEVICE;
++    }
++
++	usb_device_req.bRequest 		= request;
++	usb_device_req.wValue 			= value;
++	usb_device_req.wIndex 	    	= index;
++	usb_device_req.wLength 	    	= len;    
++
++	if (requesttype == 0x01)
++	{
++		transfer_flags = USB_IN_TRANSFER;//read_in
++	}
++	else
++	{
++		transfer_flags= USB_OUT_TRANSFER;//write_out
++	}
++
++	RT_TRACE(_module_hci_ops_os_c_,_drv_debug_,("+usbctrl_vendorreq\n",__FUNCTION__,__LINE__));
++
++#if 0
++	// Remember to add callback for sync
++	usbTrans = (*usbFuncs->lpIssueVendorTransfer)(usbHandle, 
++							usbctrl_vendorreq_complete, pdvobjpriv, 
++							transfer_flags, &usb_device_req, pdata, 0);
++#else
++	// Remember to add callback for sync
++	usbTrans = (*usbFuncs->lpIssueVendorTransfer)(usbHandle, 
++							NULL, 0, 
++							transfer_flags, &usb_device_req, pdata, 0);
++#endif
++
++//	rtw_usleep_os(10);
++
++	if ( usbTrans )
++	{
++		DWORD	dwBytes 	= 0;
++		DWORD	dwErr		= USB_CANCELED_ERROR;
++		int 	fComplete;
++
++		(*usbFuncs->lpGetTransferStatus)(usbTrans, &dwBytes, &dwErr);
++
++		fComplete = (*usbFuncs->lpIsTransferComplete)(usbTrans);
++
++		if (fComplete== _TRUE)
++		{
++			(*usbFuncs->lpCloseTransfer)(usbTrans);
++			RT_TRACE(_module_hci_ops_os_c_,_drv_debug_,("usbctrl_vendorreq lpCloseTransfer\n"));
++		}
++
++		if ( dwErr != USB_NO_ERROR || fComplete != _TRUE)
++		{
++			RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usbctrl_vendorreq lpCloseTransfer without complete\n"));
++			ret = _FALSE;
++			goto exit;
++		}
++	}
++	else
++	{
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usbctrl_vendorreq without usbTrans\n"));
++		ret = _FALSE;
++		goto exit;
++
++	}
++
++exit:
++	RT_TRACE(_module_hci_ops_os_c_,_drv_debug_,("-usbctrl_vendorreq\n"));
++_func_exit_;
++	
++	return ret;	
++
++}
++
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/usb_ops_linux.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/usb_ops_linux.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/usb_ops_linux.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/usb_ops_linux.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,1536 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _HCI_OPS_OS_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <osdep_intf.h>
++#include <usb_ops.h>
++#include <circ_buf.h>
++#include <recv_osdep.h>
++#include <rtl8192c_hal.h>
++
++#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS)
++
++#error "Shall be Linux or Windows, but not both!\n"
++
++#endif
++
++static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u8 request, u16 value, u16 index, void *pdata, u16 len, u8 requesttype)
++{
++	_adapter *padapter = pintfhdl->padapter;
++	struct dvobj_priv  *pdvobjpriv = adapter_to_dvobj(padapter); 
++	struct usb_device *udev = pdvobjpriv->pusbdev;
++
++	unsigned int pipe;
++	int status = 0;
++	u32 tmp_buflen=0;
++	u8 reqtype;
++	u8 *pIo_buf;
++	int vendorreq_times = 0;
++
++	#ifdef CONFIG_USB_VENDOR_REQ_BUFFER_DYNAMIC_ALLOCATE
++	u8 *tmp_buf;
++	#else // use stack memory
++	u8 tmp_buf[MAX_USB_IO_CTL_SIZE];
++	#endif
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if(padapter->adapter_type > PRIMARY_ADAPTER)
++	{
++		padapter = padapter->pbuddy_adapter;
++		pdvobjpriv = adapter_to_dvobj(padapter);
++		udev = pdvobjpriv->pusbdev;
++	}
++#endif
++
++
++	//DBG_871X("%s %s:%d\n",__FUNCTION__, current->comm, current->pid);
++
++	if((padapter->bSurpriseRemoved) ||(padapter->pwrctrlpriv.pnp_bstop_trx)){
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usbctrl_vendorreq:(padapter->bSurpriseRemoved ||adapter->pwrctrlpriv.pnp_bstop_trx)!!!\n"));
++		status = -EPERM; 
++		goto exit;
++	}	
++
++	if(len>MAX_VENDOR_REQ_CMD_SIZE){
++		DBG_8192C( "[%s] Buffer len error ,vendor request failed\n", __FUNCTION__ );
++		status = -EINVAL;
++		goto exit;
++	}	
++
++	#ifdef CONFIG_USB_VENDOR_REQ_MUTEX
++	_enter_critical_mutex(&pdvobjpriv->usb_vendor_req_mutex, NULL);
++	#endif
++	
++	
++	// Acquire IO memory for vendorreq
++#ifdef CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC
++	pIo_buf = pdvobjpriv->usb_vendor_req_buf;
++#else
++	#ifdef CONFIG_USB_VENDOR_REQ_BUFFER_DYNAMIC_ALLOCATE
++	tmp_buf = rtw_malloc( (u32) len + ALIGNMENT_UNIT);
++	tmp_buflen =  (u32)len + ALIGNMENT_UNIT;
++	#else // use stack memory
++	tmp_buflen = MAX_USB_IO_CTL_SIZE;
++	#endif
++
++	// Added by Albert 2010/02/09
++	// For mstar platform, mstar suggests the address for USB IO should be 16 bytes alignment.
++	// Trying to fix it here.
++	pIo_buf = (tmp_buf==NULL)?NULL:tmp_buf + ALIGNMENT_UNIT -((SIZE_PTR)(tmp_buf) & 0x0f );	
++#endif
++
++	if ( pIo_buf== NULL) {
++		DBG_8192C( "[%s] pIo_buf == NULL \n", __FUNCTION__ );
++		status = -ENOMEM;
++		goto release_mutex;
++	}
++	
++	while(++vendorreq_times<= MAX_USBCTRL_VENDORREQ_TIMES)
++	{
++		_rtw_memset(pIo_buf, 0, len);
++		
++		if (requesttype == 0x01)
++		{
++			pipe = usb_rcvctrlpipe(udev, 0);//read_in
++			reqtype =  REALTEK_USB_VENQT_READ;		
++		} 
++		else 
++		{
++			pipe = usb_sndctrlpipe(udev, 0);//write_out
++			reqtype =  REALTEK_USB_VENQT_WRITE;		
++			_rtw_memcpy( pIo_buf, pdata, len);
++		}		
++	
++		#if 0
++		//timeout test for firmware downloading
++		status = rtw_usb_control_msg(udev, pipe, request, reqtype, value, index, pIo_buf, len
++			, ((value >= FW_8192C_START_ADDRESS && value <= FW_8192C_END_ADDRESS) ||value!=0x1000) ?RTW_USB_CONTROL_MSG_TIMEOUT : RTW_USB_CONTROL_MSG_TIMEOUT_TEST
++		);
++		#else
++		status = rtw_usb_control_msg(udev, pipe, request, reqtype, value, index, pIo_buf, len, RTW_USB_CONTROL_MSG_TIMEOUT);
++		#endif
++	
++		if ( status == len)   // Success this control transfer.
++		{
++			rtw_reset_continual_urb_error(pdvobjpriv);
++			if ( requesttype == 0x01 )
++			{   // For Control read transfer, we have to copy the read data from pIo_buf to pdata.
++				_rtw_memcpy( pdata, pIo_buf,  len );
++			}
++		}
++		else { // error cases
++			DBG_8192C("reg 0x%x, usb %s %u fail, status:%d value=0x%x, vendorreq_times:%d\n"
++				, value,(requesttype == 0x01)?"read":"write" , len, status, *(u32*)pdata, vendorreq_times);
++			
++			if (status < 0) {
++				if(status == (-ESHUTDOWN)	|| status == -ENODEV	)
++				{			
++					padapter->bSurpriseRemoved = _TRUE;
++				} else {
++					#ifdef DBG_CONFIG_ERROR_DETECT
++					{
++						HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++						pHalData->srestpriv.Wifi_Error_Status = USB_VEN_REQ_CMD_FAIL;
++					}
++					#endif
++				}
++			}
++			else // status != len && status >= 0
++			{
++				if(status > 0) {
++					if ( requesttype == 0x01 )
++					{   // For Control read transfer, we have to copy the read data from pIo_buf to pdata.
++						_rtw_memcpy( pdata, pIo_buf,  len );
++					}
++				}
++			}
++
++			if(rtw_inc_and_chk_continual_urb_error(pdvobjpriv) == _TRUE ){
++				padapter->bSurpriseRemoved = _TRUE;
++				break;
++			}
++	
++		}
++	
++		// firmware download is checksumed, don't retry
++		if( (value >= FW_8192C_START_ADDRESS && value <= FW_8192C_END_ADDRESS) || status == len )
++			break;
++	
++	}
++	
++	// release IO memory used by vendorreq
++	#ifdef CONFIG_USB_VENDOR_REQ_BUFFER_DYNAMIC_ALLOCATE
++	rtw_mfree(tmp_buf, tmp_buflen);
++	#endif
++
++release_mutex:
++	#ifdef CONFIG_USB_VENDOR_REQ_MUTEX
++	_exit_critical_mutex(&pdvobjpriv->usb_vendor_req_mutex, NULL);
++	#endif
++exit:
++	return status;
++
++}
++
++static u8 usb_read8(struct intf_hdl *pintfhdl, u32 addr)
++{
++	u8 request;
++	u8 requesttype;
++	u16 wvalue;
++	u16 index;
++	u16 len;
++	u32 data=0; 
++	
++	_func_enter_;
++
++	request = 0x05;
++	requesttype = 0x01;//read_in
++	index = 0;//n/a
++
++	wvalue = (u16)(addr&0x0000ffff);
++	len = 1;	
++	
++	usbctrl_vendorreq(pintfhdl, request, wvalue, index, &data, len, requesttype);
++
++	_func_exit_;
++
++	return (u8)(le32_to_cpu(data)&0x0ff);
++		
++}
++
++static u16 usb_read16(struct intf_hdl *pintfhdl, u32 addr)
++{       
++	u8 request;
++	u8 requesttype;
++	u16 wvalue;
++	u16 index;
++	u16 len;
++	u32 data=0;
++	
++	_func_enter_;
++
++	request = 0x05;
++	requesttype = 0x01;//read_in
++	index = 0;//n/a
++
++	wvalue = (u16)(addr&0x0000ffff);
++	len = 2;	
++	
++	usbctrl_vendorreq(pintfhdl, request, wvalue, index, &data, len, requesttype);
++
++	_func_exit_;
++
++	return (u16)(le32_to_cpu(data)&0xffff);
++	
++}
++
++static u32 usb_read32(struct intf_hdl *pintfhdl, u32 addr)
++{
++	u8 request;
++	u8 requesttype;
++	u16 wvalue;
++	u16 index;
++	u16 len;
++	u32 data=0;
++	
++	_func_enter_;
++
++	request = 0x05;
++	requesttype = 0x01;//read_in
++	index = 0;//n/a
++
++	wvalue = (u16)(addr&0x0000ffff);
++	len = 4;	
++	
++	usbctrl_vendorreq(pintfhdl, request, wvalue, index, &data, len, requesttype);
++
++	_func_exit_;
++
++	return le32_to_cpu(data);
++	
++}
++
++static int usb_write8(struct intf_hdl *pintfhdl, u32 addr, u8 val)
++{
++	u8 request;
++	u8 requesttype;
++	u16 wvalue;
++	u16 index;
++	u16 len;
++	u32 data;
++	int ret;
++	
++	_func_enter_;
++
++	request = 0x05;
++	requesttype = 0x00;//write_out
++	index = 0;//n/a
++
++	wvalue = (u16)(addr&0x0000ffff);
++	len = 1;
++	
++	data = val;
++	data = cpu_to_le32(data&0x000000ff);
++	
++	ret = usbctrl_vendorreq(pintfhdl, request, wvalue, index, &data, len, requesttype);
++	
++	_func_exit_;
++	
++	return ret;
++	
++}
++
++static int usb_write16(struct intf_hdl *pintfhdl, u32 addr, u16 val)
++{	
++	u8 request;
++	u8 requesttype;
++	u16 wvalue;
++	u16 index;
++	u16 len;
++	u32 data;
++	int ret;
++	
++	_func_enter_;
++
++	request = 0x05;
++	requesttype = 0x00;//write_out
++	index = 0;//n/a
++
++	wvalue = (u16)(addr&0x0000ffff);
++	len = 2;
++	
++	data = val;
++	data = cpu_to_le32(data&0x0000ffff);
++	
++	ret = usbctrl_vendorreq(pintfhdl, request, wvalue, index, &data, len, requesttype);
++	
++	_func_exit_;
++	
++	return ret;
++	
++}
++
++static int usb_write32(struct intf_hdl *pintfhdl, u32 addr, u32 val)
++{
++	u8 request;
++	u8 requesttype;
++	u16 wvalue;
++	u16 index;
++	u16 len;
++	u32 data;
++	int ret;
++	
++	_func_enter_;
++
++	request = 0x05;
++	requesttype = 0x00;//write_out
++	index = 0;//n/a
++
++	wvalue = (u16)(addr&0x0000ffff);
++	len = 4;
++	data = cpu_to_le32(val);	
++	
++
++	ret =usbctrl_vendorreq(pintfhdl, request, wvalue, index, &data, len, requesttype);
++	
++	_func_exit_;
++	
++	return ret;
++	
++}
++
++static int usb_writeN(struct intf_hdl *pintfhdl, u32 addr, u32 length, u8 *pdata)
++{
++	u8 request;
++	u8 requesttype;
++	u16 wvalue;
++	u16 index;
++	u16 len;
++	u8 buf[VENDOR_CMD_MAX_DATA_LEN]={0};
++	int ret;
++	
++	_func_enter_;
++
++	request = 0x05;
++	requesttype = 0x00;//write_out
++	index = 0;//n/a
++
++	wvalue = (u16)(addr&0x0000ffff);
++	len = length;
++	 _rtw_memcpy(buf, pdata, len );
++	
++	ret = usbctrl_vendorreq(pintfhdl, request, wvalue, index, buf, len, requesttype);
++	
++	_func_exit_;
++	
++	return ret;
++	
++}
++
++#ifdef CONFIG_USB_INTERRUPT_IN_PIPE
++static void usb_read_interrupt_complete(struct urb *purb, struct pt_regs *regs)
++{
++	int	err;
++	_adapter		*padapter = (_adapter	 *)purb->context;
++
++	if(purb->status==0)//SUCCESS
++	{
++		if (purb->actual_length > sizeof(INTERRUPT_MSG_FORMAT_EX))
++		{
++			DBG_8192C("usb_read_interrupt_complete: purb->actual_length > sizeof(INTERRUPT_MSG_FORMAT_EX) \n");
++		}
++
++		err = usb_submit_urb(purb, GFP_ATOMIC);
++		if((err) && (err != (-EPERM)))
++		{
++			DBG_8192C("cannot submit interrupt in-token(err = 0x%08x),urb_status = %d\n",err, purb->status);
++		}
++	}
++	else
++	{
++		DBG_8192C("###=> usb_read_interrupt_complete => urb status(%d)\n", purb->status);
++
++		switch(purb->status) {
++			case -EINVAL:
++			case -EPIPE:			
++			case -ENODEV:
++			case -ESHUTDOWN:
++				//padapter->bSurpriseRemoved=_TRUE;
++				RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete:bSurpriseRemoved=TRUE\n"));
++			case -ENOENT:
++				padapter->bDriverStopped=_TRUE;			
++				RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete:bDriverStopped=TRUE\n"));
++				break;
++			case -EPROTO:
++				break;
++			case -EINPROGRESS:
++				DBG_8192C("ERROR: URB IS IN PROGRESS!/n");
++				break;
++			default:
++				break;				
++		}
++	}	
++
++}
++
++static u32 usb_read_interrupt(struct intf_hdl *pintfhdl, u32 addr)
++{
++	int	err;
++	unsigned int pipe;
++	u32	ret = _SUCCESS;
++	_adapter			*adapter = pintfhdl->padapter;
++	struct dvobj_priv	*pdvobj = adapter_to_dvobj(adapter);
++	struct recv_priv	*precvpriv = &adapter->recvpriv;
++	struct usb_device	*pusbd = pdvobj->pusbdev;
++
++_func_enter_;
++
++	//translate DMA FIFO addr to pipehandle
++	pipe = ffaddr2pipehdl(pdvobj, addr);
++
++	usb_fill_int_urb(precvpriv->int_in_urb, pusbd, pipe, 
++					precvpriv->int_in_buf,
++            				sizeof(INTERRUPT_MSG_FORMAT_EX),
++            				usb_read_interrupt_complete,
++            				adapter,
++            				1);
++
++	err = usb_submit_urb(precvpriv->int_in_urb, GFP_ATOMIC);
++	if((err) && (err != (-EPERM)))
++	{
++		DBG_8192C("cannot submit interrupt in-token(err = 0x%08x),urb_status = %d\n",err, precvpriv->int_in_urb->status);
++		ret = _FAIL;
++	}
++
++_func_exit_;
++
++	return ret;
++}
++#endif
++
++static s32 pre_recv_entry(union recv_frame *precvframe, struct recv_stat *prxstat, struct phy_stat *pphy_info)
++{	
++	s32 ret=_SUCCESS;
++#ifdef CONFIG_CONCURRENT_MODE	
++	u8 *primary_myid, *secondary_myid, *paddr1;
++	union recv_frame	*precvframe_if2 = NULL;
++	_adapter *primary_padapter = precvframe->u.hdr.adapter;
++	_adapter *secondary_padapter = primary_padapter->pbuddy_adapter;
++	struct recv_priv *precvpriv = &primary_padapter->recvpriv;
++	_queue *pfree_recv_queue = &precvpriv->free_recv_queue;
++	u8	*pbuf = precvframe->u.hdr.rx_data;
++	
++	if(!secondary_padapter)
++		return ret;
++	
++	paddr1 = GetAddr1Ptr(precvframe->u.hdr.rx_data);		
++
++	if(IS_MCAST(paddr1) == _FALSE)//unicast packets
++	{
++		//primary_myid = myid(&primary_padapter->eeprompriv);
++		secondary_myid = myid(&secondary_padapter->eeprompriv);
++
++		if(_rtw_memcmp(paddr1, secondary_myid, ETH_ALEN))
++		{			
++			//change to secondary interface
++			precvframe->u.hdr.adapter = secondary_padapter;
++		}	
++
++		//ret = recv_entry(precvframe);
++
++	}
++	else // Handle BC/MC Packets	
++	{
++		
++		u8 clone = _TRUE;
++#if 0		
++		u8 type, subtype, *paddr2, *paddr3;
++	
++		type =  GetFrameType(pbuf);
++		subtype = GetFrameSubType(pbuf); //bit(7)~bit(2)
++		
++		switch (type)
++		{
++			case WIFI_MGT_TYPE: //Handle BC/MC mgnt Packets
++				if(subtype == WIFI_BEACON)
++				{
++					paddr3 = GetAddr3Ptr(precvframe->u.hdr.rx_data);
++				
++					if (check_fwstate(&secondary_padapter->mlmepriv, _FW_LINKED) &&
++						_rtw_memcmp(paddr3, get_bssid(&secondary_padapter->mlmepriv), ETH_ALEN))
++					{
++						//change to secondary interface
++						precvframe->u.hdr.adapter = secondary_padapter;
++						clone = _FALSE;
++					}
++
++					if(check_fwstate(&primary_padapter->mlmepriv, _FW_LINKED) &&
++						_rtw_memcmp(paddr3, get_bssid(&primary_padapter->mlmepriv), ETH_ALEN))
++					{
++						if(clone==_FALSE)
++						{
++							clone = _TRUE;									
++						}	
++						else
++						{
++							clone = _FALSE;
++						}
++
++						precvframe->u.hdr.adapter = primary_padapter;	
++					}
++
++					if(check_fwstate(&primary_padapter->mlmepriv, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) ||
++						check_fwstate(&secondary_padapter->mlmepriv, _FW_UNDER_SURVEY|_FW_UNDER_LINKING))
++					{
++						clone = _TRUE;
++						precvframe->u.hdr.adapter = primary_padapter;	
++					}
++				
++				}
++				else if(subtype == WIFI_PROBEREQ)
++				{
++					//probe req frame is only for interface2
++					//change to secondary interface
++					precvframe->u.hdr.adapter = secondary_padapter;
++					clone = _FALSE;
++				}			
++				break;
++			case WIFI_CTRL_TYPE: // Handle BC/MC ctrl Packets
++			
++				break;
++			case WIFI_DATA_TYPE: //Handle BC/MC data Packets
++					//Notes: AP MODE never rx BC/MC data packets
++			
++				paddr2 = GetAddr2Ptr(precvframe->u.hdr.rx_data);
++
++				if(_rtw_memcmp(paddr2, get_bssid(&secondary_padapter->mlmepriv), ETH_ALEN))
++				{
++					//change to secondary interface
++					precvframe->u.hdr.adapter = secondary_padapter;
++					clone = _FALSE;
++				}
++
++				break;
++			default:
++			
++				break;			
++		}
++#endif
++
++		if(_TRUE == clone)
++		{
++			//clone/copy to if2
++			u8 shift_sz = 0;
++			u32 alloc_sz, skb_len;
++			_pkt	 *pkt_copy = NULL;
++			struct rx_pkt_attrib *pattrib = NULL;
++		
++			precvframe_if2 = rtw_alloc_recvframe(pfree_recv_queue);
++			if(precvframe_if2)
++			{
++				precvframe_if2->u.hdr.adapter = secondary_padapter;
++		
++				_rtw_init_listhead(&precvframe_if2->u.hdr.list);	
++				precvframe_if2->u.hdr.precvbuf = NULL;	//can't access the precvbuf for new arch.
++				precvframe_if2->u.hdr.len=0;
++
++				_rtw_memcpy(&precvframe_if2->u.hdr.attrib, &precvframe->u.hdr.attrib, sizeof(struct rx_pkt_attrib));
++
++				pattrib = &precvframe_if2->u.hdr.attrib;
++
++				//	Modified by Albert 20101213
++				//	For 8 bytes IP header alignment.
++				if (pattrib->qos)	//	Qos data, wireless lan header length is 26
++				{
++					shift_sz = 6;
++				}
++				else
++				{
++					shift_sz = 0;
++				}
++
++				skb_len = pattrib->pkt_len;
++
++				// for first fragment packet, driver need allocate 1536+drvinfo_sz+RXDESC_SIZE to defrag packet.
++				// modify alloc_sz for recvive crc error packet by thomas 2011-06-02
++				if((pattrib->mfrag == 1)&&(pattrib->frag_num == 0)){
++					//alloc_sz = 1664;	//1664 is 128 alignment.
++					if(skb_len <= 1650)
++						alloc_sz = 1664;
++					else
++						alloc_sz = skb_len + 14;
++				}
++				else {
++					alloc_sz = skb_len;
++					//	6 is for IP header 8 bytes alignment in QoS packet case.
++					//	8 is for skb->data 4 bytes alignment.
++					alloc_sz += 14;
++				}
++
++				pkt_copy = rtw_skb_alloc(alloc_sz);
++
++				if(pkt_copy)
++				{
++					pkt_copy->dev = secondary_padapter->pnetdev;
++					precvframe_if2->u.hdr.pkt = pkt_copy;
++					precvframe_if2->u.hdr.rx_head = pkt_copy->data;
++					precvframe_if2->u.hdr.rx_end = pkt_copy->data + alloc_sz;
++					skb_reserve( pkt_copy, 8 - ((SIZE_PTR)( pkt_copy->data ) & 7 ));//force pkt_copy->data at 8-byte alignment address
++					skb_reserve( pkt_copy, shift_sz );//force ip_hdr at 8-byte alignment address according to shift_sz.
++					_rtw_memcpy(pkt_copy->data, pbuf, skb_len);
++					precvframe_if2->u.hdr.rx_data = precvframe_if2->u.hdr.rx_tail = pkt_copy->data;
++					
++			
++					recvframe_put(precvframe_if2, skb_len);
++					//recvframe_pull(precvframe_if2, drvinfo_sz + RXDESC_SIZE);
++
++					rtl8192c_translate_rx_signal_stuff(precvframe_if2, pphy_info);
++	
++					ret = rtw_recv_entry(precvframe_if2);
++
++				} else {
++					rtw_free_recvframe(precvframe_if2, pfree_recv_queue);
++					DBG_8192C("%s()-%d: alloc_skb() failed!\n", __FUNCTION__, __LINE__);	
++				}
++
++			}
++			
++		}
++		
++	}
++
++	rtl8192c_translate_rx_signal_stuff(precvframe, pphy_info);
++
++	ret = rtw_recv_entry(precvframe);
++
++#endif
++
++	return ret;
++
++}
++
++#ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX
++static int recvbuf2recvframe(_adapter *padapter, struct recv_buf *precvbuf)
++{
++	u8	*pbuf;
++	u8	shift_sz = 0;
++	u16	pkt_cnt, drvinfo_sz;
++	u32	pkt_offset, skb_len, alloc_sz;
++	s32	transfer_len;
++	struct recv_stat	*prxstat;
++	struct phy_stat	*pphy_info = NULL;
++	_pkt				*pkt_copy = NULL;
++	union recv_frame	*precvframe = NULL;
++	struct rx_pkt_attrib	*pattrib = NULL;
++	HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(padapter);
++	struct recv_priv	*precvpriv = &padapter->recvpriv;
++	_queue			*pfree_recv_queue = &precvpriv->free_recv_queue;
++
++
++	transfer_len = (s32)precvbuf->transfer_len;	
++	pbuf = precvbuf->pbuf;
++
++	prxstat = (struct recv_stat *)pbuf;	
++	pkt_cnt = (le32_to_cpu(prxstat->rxdw2)>>16) & 0xff;
++	
++#if 0 //temp remove when disable usb rx aggregation
++	if((pkt_cnt > 10) || (pkt_cnt < 1) || (transfer_len<RXDESC_SIZE) ||(pkt_len<=0))
++	{		
++		return _FAIL;
++	}
++#endif
++	
++	do{		
++		RT_TRACE(_module_rtl871x_recv_c_, _drv_info_,
++			 ("recvbuf2recvframe: rxdesc=offsset 0:0x%08x, 4:0x%08x, 8:0x%08x, C:0x%08x\n",
++			  prxstat->rxdw0, prxstat->rxdw1, prxstat->rxdw2, prxstat->rxdw4));
++
++		prxstat = (struct recv_stat *)pbuf;
++
++		precvframe = rtw_alloc_recvframe(pfree_recv_queue);
++		if(precvframe==NULL)
++		{
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("recvbuf2recvframe: precvframe==NULL\n"));
++			DBG_8192C("%s()-%d: rtw_alloc_recvframe() failed! RX Drop!\n", __FUNCTION__, __LINE__);	
++			goto _exit_recvbuf2recvframe;
++		}
++
++		_rtw_init_listhead(&precvframe->u.hdr.list);	
++		precvframe->u.hdr.precvbuf = NULL;	//can't access the precvbuf for new arch.
++		precvframe->u.hdr.len=0;
++
++		rtl8192c_query_rx_desc_status(precvframe, prxstat);
++
++		pattrib = &precvframe->u.hdr.attrib;
++		if(pattrib->physt)
++		{
++			pphy_info = (struct phy_stat *)(pbuf + RXDESC_OFFSET);
++		}
++
++		pkt_offset = RXDESC_SIZE + pattrib->drvinfo_sz + pattrib->shift_sz + pattrib->pkt_len;
++
++		if((pattrib->pkt_len<=0) || (pkt_offset>transfer_len))
++		{	
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("recvbuf2recvframe: pkt_len<=0\n"));
++			DBG_8192C("%s()-%d: RX Warning!\n", __FUNCTION__, __LINE__);	
++			rtw_free_recvframe(precvframe, pfree_recv_queue);
++			goto _exit_recvbuf2recvframe;
++		}
++
++		//	Modified by Albert 20101213
++		//	For 8 bytes IP header alignment.
++		if (pattrib->qos)	//	Qos data, wireless lan header length is 26
++		{
++			shift_sz = 6;
++		}
++		else
++		{
++			shift_sz = 0;
++		}
++
++		skb_len = pattrib->pkt_len;
++
++		// for first fragment packet, driver need allocate 1536+drvinfo_sz+RXDESC_SIZE to defrag packet.
++		// modify alloc_sz for recvive crc error packet by thomas 2011-06-02
++		if((pattrib->mfrag == 1)&&(pattrib->frag_num == 0)){
++			//alloc_sz = 1664;	//1664 is 128 alignment.
++			if(skb_len <= 1650)
++				alloc_sz = 1664;
++			else
++				alloc_sz = skb_len + 14;
++		}
++		else {
++			alloc_sz = skb_len;
++			//	6 is for IP header 8 bytes alignment in QoS packet case.
++			//	8 is for skb->data 4 bytes alignment.
++			alloc_sz += 14;
++		}
++
++		pkt_copy = rtw_skb_alloc(alloc_sz);
++
++		if(pkt_copy)
++		{
++			pkt_copy->dev = padapter->pnetdev;
++			precvframe->u.hdr.pkt = pkt_copy;
++			precvframe->u.hdr.rx_head = pkt_copy->data;
++			precvframe->u.hdr.rx_end = pkt_copy->data + alloc_sz;
++			skb_reserve( pkt_copy, 8 - ((SIZE_PTR)( pkt_copy->data ) & 7 ));//force pkt_copy->data at 8-byte alignment address
++			skb_reserve( pkt_copy, shift_sz );//force ip_hdr at 8-byte alignment address according to shift_sz.
++			_rtw_memcpy(pkt_copy->data, (pbuf + pattrib->shift_sz + pattrib->drvinfo_sz + RXDESC_SIZE), skb_len);
++			precvframe->u.hdr.rx_data = precvframe->u.hdr.rx_tail = pkt_copy->data;
++		}
++		else
++		{
++			DBG_8192C("recvbuf2recvframe:can not allocate memory for skb copy\n");
++			//precvframe->u.hdr.pkt = rtw_skb_clone(pskb);
++			//precvframe->u.hdr.rx_head = precvframe->u.hdr.rx_data = precvframe->u.hdr.rx_tail = pbuf;
++			//precvframe->u.hdr.rx_end = pbuf + (pkt_offset>1612?pkt_offset:1612);
++
++			precvframe->u.hdr.pkt = NULL;
++			rtw_free_recvframe(precvframe, pfree_recv_queue);
++
++			goto _exit_recvbuf2recvframe;
++		}
++
++		recvframe_put(precvframe, skb_len);
++		//recvframe_pull(precvframe, drvinfo_sz + RXDESC_SIZE);	
++
++#ifdef CONFIG_USB_RX_AGGREGATION
++		switch(pHalData->UsbRxAggMode)
++		{
++			case USB_RX_AGG_DMA:
++			case USB_RX_AGG_MIX:
++				pkt_offset = (u16)_RND128(pkt_offset);
++				break;
++				case USB_RX_AGG_USB:
++				pkt_offset = (u16)_RND4(pkt_offset);
++				break;
++			case USB_RX_AGG_DISABLE:			
++			default:				
++				break;
++		}
++#endif
++
++#ifdef CONFIG_CONCURRENT_MODE
++		if(rtw_buddy_adapter_up(padapter))
++		{
++			if(pre_recv_entry(precvframe, prxstat, pphy_info) != _SUCCESS)
++			{
++				RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("recvbuf2recvframe: recv_entry(precvframe) != _SUCCESS\n"));
++			}
++		}
++		else
++		{
++			rtl8192c_translate_rx_signal_stuff(precvframe, pphy_info);
++			if(rtw_recv_entry(precvframe) != _SUCCESS)
++			{
++				RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("recvbuf2recvframe: rtw_recv_entry(precvframe) != _SUCCESS\n"));
++			}
++		}
++	
++#else
++		rtl8192c_translate_rx_signal_stuff(precvframe, pphy_info);
++		if(rtw_recv_entry(precvframe) != _SUCCESS)
++		{
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("recvbuf2recvframe: rtw_recv_entry(precvframe) != _SUCCESS\n"));
++		}
++#endif
++
++		pkt_cnt--;
++		transfer_len -= pkt_offset;
++		pbuf += pkt_offset;	
++		precvframe = NULL;
++		pkt_copy = NULL;
++
++		if(transfer_len>0 && pkt_cnt==0)
++			pkt_cnt = (le32_to_cpu(prxstat->rxdw2)>>16) & 0xff;
++
++	}while((transfer_len>0) && (pkt_cnt>0));
++
++_exit_recvbuf2recvframe:
++
++	return _SUCCESS;
++}
++
++void rtl8192cu_recv_tasklet(void *priv)
++{	
++	struct recv_buf *precvbuf = NULL;
++	_adapter	*padapter = (_adapter*)priv;
++	struct recv_priv	*precvpriv = &padapter->recvpriv;
++
++	while (NULL != (precvbuf = rtw_dequeue_recvbuf(&precvpriv->recv_buf_pending_queue)))
++	{
++		if ((padapter->bDriverStopped == _TRUE)||(padapter->bSurpriseRemoved== _TRUE))
++		{
++			DBG_8192C("recv_tasklet => bDriverStopped or bSurpriseRemoved \n");
++			
++			break;
++		}
++		
++
++		recvbuf2recvframe(padapter, precvbuf);
++
++		rtw_read_port(padapter, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf);
++	}	
++	
++}
++
++static void usb_read_port_complete(struct urb *purb, struct pt_regs *regs)
++{	
++	struct recv_buf	*precvbuf = (struct recv_buf *)purb->context;	
++	_adapter 			*padapter =(_adapter *)precvbuf->adapter;
++	struct recv_priv	*precvpriv = &padapter->recvpriv;
++
++	RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete!!!\n"));
++	
++	precvpriv->rx_pending_cnt --;
++		
++	if(padapter->bSurpriseRemoved || padapter->bDriverStopped||padapter->bReadPortCancel)
++	{
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete:bDriverStopped(%d) OR bSurpriseRemoved(%d)\n", padapter->bDriverStopped, padapter->bSurpriseRemoved));		
++
++		goto exit;
++	}
++
++	if(purb->status==0)//SUCCESS
++	{
++		if ((purb->actual_length > MAX_RECVBUF_SZ) || (purb->actual_length < RXDESC_SIZE))
++		{
++			RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete: (purb->actual_length > MAX_RECVBUF_SZ) || (purb->actual_length < RXDESC_SIZE)\n"));
++
++			rtw_read_port(padapter, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf);
++		}
++		else 
++		{			
++			rtw_reset_continual_urb_error(adapter_to_dvobj(padapter));
++			
++			precvbuf->transfer_len = purb->actual_length;	
++
++			//rtw_enqueue_rx_transfer_buffer(precvpriv, rx_transfer_buf);			
++			rtw_enqueue_recvbuf(precvbuf, &precvpriv->recv_buf_pending_queue);
++
++			tasklet_schedule(&precvpriv->recv_tasklet);			
++		}		
++	}
++	else
++	{
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete : purb->status(%d) != 0 \n", purb->status));
++	
++		DBG_8192C("###=> usb_read_port_complete => urb status(%d)\n", purb->status);
++
++		if(rtw_inc_and_chk_continual_urb_error(adapter_to_dvobj(padapter)) == _TRUE ){
++			padapter->bSurpriseRemoved = _TRUE;
++		}
++
++		switch(purb->status) {
++			case -EINVAL:
++			case -EPIPE:			
++			case -ENODEV:
++			case -ESHUTDOWN:
++				//padapter->bSurpriseRemoved=_TRUE;
++				RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete:bSurpriseRemoved=TRUE\n"));
++			case -ENOENT:
++				padapter->bDriverStopped=_TRUE;			
++				RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete:bDriverStopped=TRUE\n"));
++				break;
++			case -EPROTO:
++			case -EILSEQ:
++			case -ETIME:
++			case -ECOMM:
++			case -EOVERFLOW:
++				#ifdef DBG_CONFIG_ERROR_DETECT	
++				{	
++					HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++					pHalData->srestpriv.Wifi_Error_Status = USB_READ_PORT_FAIL;			
++				}
++				#endif
++				rtw_read_port(padapter, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf);			
++				break;
++			case -EINPROGRESS:
++				DBG_8192C("ERROR: URB IS IN PROGRESS!/n");
++				break;
++			default:
++				break;				
++		}
++		
++	}	
++
++exit:	
++	
++_func_exit_;
++	
++}
++
++static u32 usb_read_port(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *rmem)
++{		
++	int err;
++	unsigned int pipe;
++	u32 ret = _SUCCESS;
++	PURB purb = NULL;
++	struct recv_buf	*precvbuf = (struct recv_buf *)rmem;
++	_adapter *adapter = pintfhdl->padapter;
++	struct dvobj_priv	*pdvobj = adapter_to_dvobj(adapter);
++	struct recv_priv	*precvpriv = &adapter->recvpriv;
++	struct usb_device	*pusbd = pdvobj->pusbdev;
++
++_func_enter_;
++	
++	if(adapter->bDriverStopped || adapter->bSurpriseRemoved ||adapter->pwrctrlpriv.pnp_bstop_trx)
++	{
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port:( padapter->bDriverStopped ||padapter->bSurpriseRemoved ||adapter->pwrctrlpriv.pnp_bstop_trx)!!!\n"));
++		return _FAIL;
++	}
++
++	if(precvbuf !=NULL)
++	{	
++		rtl8192cu_init_recvbuf(adapter, precvbuf);
++
++		if(precvbuf->pbuf)
++		{			
++			precvpriv->rx_pending_cnt++;
++		
++			purb = precvbuf->purb;		
++
++			//translate DMA FIFO addr to pipehandle
++			pipe = ffaddr2pipehdl(pdvobj, addr);	
++
++			usb_fill_bulk_urb(purb, pusbd, pipe, 
++						precvbuf->pbuf,
++                				MAX_RECVBUF_SZ,
++                				usb_read_port_complete,
++                				precvbuf);//context is precvbuf
++
++			purb->transfer_dma = precvbuf->dma_transfer_addr;
++			purb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;								
++
++			err = usb_submit_urb(purb, GFP_ATOMIC);	
++			if((err) && (err != (-EPERM)))
++			{
++				RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("cannot submit rx in-token(err=0x%.8x), URB_STATUS =0x%.8x", err, purb->status));
++				DBG_8192C("cannot submit rx in-token(err = 0x%08x),urb_status = %d\n",err,purb->status);
++				ret = _FAIL;
++			}
++			
++		}
++			
++	}
++	else
++	{
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port:precvbuf ==NULL\n"));
++		ret = _FAIL;
++	}
++
++_func_exit_;
++
++	return ret;
++}
++#else	// CONFIG_USE_USB_BUFFER_ALLOC_RX
++static int recvbuf2recvframe(_adapter *padapter, _pkt *pskb)
++{
++	u8	*pbuf;
++	u8	shift_sz = 0;
++	u16	pkt_cnt;
++	u32	pkt_offset, skb_len, alloc_sz;
++	s32	transfer_len;
++	struct recv_stat	*prxstat;
++	struct phy_stat	*pphy_info = NULL;
++	_pkt				*pkt_copy = NULL;
++	union recv_frame	*precvframe = NULL;
++	struct rx_pkt_attrib	*pattrib = NULL;
++	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++	struct recv_priv	*precvpriv = &padapter->recvpriv;
++	_queue			*pfree_recv_queue = &precvpriv->free_recv_queue;
++
++
++	transfer_len = (s32)pskb->len;	
++	pbuf = pskb->data;
++
++	prxstat = (struct recv_stat *)pbuf;	
++	pkt_cnt = (le32_to_cpu(prxstat->rxdw2)>>16) & 0xff;
++
++#if 0 //temp remove when disable usb rx aggregation
++	if((pkt_cnt > 10) || (pkt_cnt < 1) || (transfer_len<RXDESC_SIZE) ||(pkt_len<=0))
++	{		
++		return _FAIL;
++	}
++#endif
++
++	do{		
++		RT_TRACE(_module_rtl871x_recv_c_, _drv_info_,
++			 ("recvbuf2recvframe: rxdesc=offsset 0:0x%08x, 4:0x%08x, 8:0x%08x, C:0x%08x\n",
++			  prxstat->rxdw0, prxstat->rxdw1, prxstat->rxdw2, prxstat->rxdw4));
++
++		prxstat = (struct recv_stat *)pbuf;
++
++		precvframe = rtw_alloc_recvframe(pfree_recv_queue);
++		if(precvframe==NULL)
++		{
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("recvbuf2recvframe: precvframe==NULL\n"));
++			DBG_8192C("%s()-%d: rtw_alloc_recvframe() failed! RX Drop!\n", __FUNCTION__, __LINE__);	
++			goto _exit_recvbuf2recvframe;
++		}
++
++		_rtw_init_listhead(&precvframe->u.hdr.list);	
++		precvframe->u.hdr.precvbuf = NULL;	//can't access the precvbuf for new arch.
++		precvframe->u.hdr.len=0;
++
++		rtl8192c_query_rx_desc_status(precvframe, prxstat);
++
++		pattrib = &precvframe->u.hdr.attrib;
++		if(pattrib->physt)
++		{
++			pphy_info = (struct phy_stat *)(pbuf + RXDESC_OFFSET);
++		}
++
++		pkt_offset = RXDESC_SIZE + pattrib->drvinfo_sz + pattrib->shift_sz + pattrib->pkt_len;
++
++		if((pattrib->pkt_len<=0) || (pkt_offset>transfer_len))
++		{	
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("recvbuf2recvframe: pkt_len<=0\n"));
++			DBG_8192C("%s()-%d: RX Warning!\n", __FUNCTION__, __LINE__);	
++			rtw_free_recvframe(precvframe, pfree_recv_queue);
++			goto _exit_recvbuf2recvframe;
++		}
++
++		//	Modified by Albert 20101213
++		//	For 8 bytes IP header alignment.
++		if (pattrib->qos)	//	Qos data, wireless lan header length is 26
++		{
++			shift_sz = 6;
++		}
++		else
++		{
++			shift_sz = 0;
++		}
++
++		skb_len = pattrib->pkt_len;
++
++		// for first fragment packet, driver need allocate 1536+drvinfo_sz+RXDESC_SIZE to defrag packet.
++		// modify alloc_sz for recvive crc error packet by thomas 2011-06-02
++		if((pattrib->mfrag == 1)&&(pattrib->frag_num == 0)){
++			//alloc_sz = 1664;	//1664 is 128 alignment.
++			if(skb_len <= 1650)
++				alloc_sz = 1664;
++			else
++				alloc_sz = skb_len + 14;
++		}
++		else {
++			alloc_sz = skb_len;
++			//	6 is for IP header 8 bytes alignment in QoS packet case.
++			//	8 is for skb->data 4 bytes alignment.
++			alloc_sz += 14;
++		}
++
++		pkt_copy = rtw_skb_alloc(alloc_sz);
++
++		if(pkt_copy)
++		{
++			pkt_copy->dev = padapter->pnetdev;
++			precvframe->u.hdr.pkt = pkt_copy;
++			precvframe->u.hdr.rx_head = pkt_copy->data;
++			precvframe->u.hdr.rx_end = pkt_copy->data + alloc_sz;
++			skb_reserve( pkt_copy, 8 - ((SIZE_PTR)( pkt_copy->data ) & 7 ));//force pkt_copy->data at 8-byte alignment address
++			skb_reserve( pkt_copy, shift_sz );//force ip_hdr at 8-byte alignment address according to shift_sz.
++			_rtw_memcpy(pkt_copy->data, (pbuf + pattrib->shift_sz + pattrib->drvinfo_sz + RXDESC_SIZE), skb_len);
++			precvframe->u.hdr.rx_data = precvframe->u.hdr.rx_tail = pkt_copy->data;
++			
++		}
++		else
++		{
++			precvframe->u.hdr.pkt = rtw_skb_clone(pskb);
++			if(pkt_copy)
++			{
++				precvframe->u.hdr.rx_head = precvframe->u.hdr.rx_data = precvframe->u.hdr.rx_tail = pbuf;
++				precvframe->u.hdr.rx_end = pbuf + alloc_sz;
++			}
++			else
++			{
++				DBG_8192C("recvbuf2recvframe: rtw_skb_clone fail\n");
++				rtw_free_recvframe(precvframe, pfree_recv_queue);
++				goto _exit_recvbuf2recvframe;
++			}
++		}
++
++		recvframe_put(precvframe, skb_len);
++		//recvframe_pull(precvframe, drvinfo_sz + RXDESC_SIZE);	
++
++#ifdef CONFIG_USB_RX_AGGREGATION
++		switch(pHalData->UsbRxAggMode)
++		{
++			case USB_RX_AGG_DMA:
++			case USB_RX_AGG_MIX:
++				pkt_offset = (u16)_RND128(pkt_offset);
++				break;
++				case USB_RX_AGG_USB:
++				pkt_offset = (u16)_RND4(pkt_offset);
++				break;
++			case USB_RX_AGG_DISABLE:			
++			default:				
++				break;
++		}
++#endif
++
++#ifdef CONFIG_CONCURRENT_MODE
++		if(rtw_buddy_adapter_up(padapter))
++		{
++			if(pre_recv_entry(precvframe, prxstat, pphy_info) != _SUCCESS)
++			{
++				RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("recvbuf2recvframe: recv_entry(precvframe) != _SUCCESS\n"));
++			}
++		}
++		else
++		{
++			rtl8192c_translate_rx_signal_stuff(precvframe, pphy_info);
++			if(rtw_recv_entry(precvframe) != _SUCCESS)
++			{
++				RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("recvbuf2recvframe: rtw_recv_entry(precvframe) != _SUCCESS\n"));
++			}
++		}
++	
++#else
++		rtl8192c_translate_rx_signal_stuff(precvframe, pphy_info);
++		if(rtw_recv_entry(precvframe) != _SUCCESS)
++		{
++			RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("recvbuf2recvframe: rtw_recv_entry(precvframe) != _SUCCESS\n"));
++		}
++#endif		
++
++		pkt_cnt--;
++		transfer_len -= pkt_offset;
++		pbuf += pkt_offset;	
++		precvframe = NULL;
++		pkt_copy = NULL;
++
++		if(transfer_len>0 && pkt_cnt==0)
++			pkt_cnt = (le32_to_cpu(prxstat->rxdw2)>>16) & 0xff;
++
++	}while((transfer_len>0) && (pkt_cnt>0));
++
++_exit_recvbuf2recvframe:
++
++	return _SUCCESS;	
++}
++
++void rtl8192cu_recv_tasklet(void *priv)
++{
++	_pkt			*pskb;
++	_adapter		*padapter = (_adapter*)priv;
++	struct recv_priv	*precvpriv = &padapter->recvpriv;
++	
++	while (NULL != (pskb = skb_dequeue(&precvpriv->rx_skb_queue)))
++	{
++		if ((padapter->bDriverStopped == _TRUE)||(padapter->bSurpriseRemoved== _TRUE))
++		{
++			DBG_8192C("recv_tasklet => bDriverStopped or bSurpriseRemoved \n");
++			rtw_skb_free(pskb);
++			break;
++		}
++	
++		recvbuf2recvframe(padapter, pskb);
++
++#ifdef CONFIG_PREALLOC_RECV_SKB
++
++		skb_reset_tail_pointer(pskb);
++
++		pskb->len = 0;
++		
++		skb_queue_tail(&precvpriv->free_recv_skb_queue, pskb);
++		
++#else
++		rtw_skb_free(pskb);
++#endif
++				
++	}
++	
++}
++
++
++static void usb_read_port_complete(struct urb *purb, struct pt_regs *regs)
++{
++	_irqL irqL;
++	uint isevt, *pbuf;
++	struct recv_buf	*precvbuf = (struct recv_buf *)purb->context;	
++	_adapter 			*padapter =(_adapter *)precvbuf->adapter;
++	struct recv_priv	*precvpriv = &padapter->recvpriv;	
++	
++	RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete!!!\n"));
++	
++	//_enter_critical(&precvpriv->lock, &irqL);
++	//precvbuf->irp_pending=_FALSE;
++	//precvpriv->rx_pending_cnt --;
++	//_exit_critical(&precvpriv->lock, &irqL);
++		
++	precvpriv->rx_pending_cnt --;
++		
++	//if(precvpriv->rx_pending_cnt== 0)
++	//{		
++	//	RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete: rx_pending_cnt== 0, set allrxreturnevt!\n"));
++	//	_rtw_up_sema(&precvpriv->allrxreturnevt);	
++	//}
++
++	if(padapter->bSurpriseRemoved || padapter->bDriverStopped||padapter->bReadPortCancel)
++	{
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete:bDriverStopped(%d) OR bSurpriseRemoved(%d)\n", padapter->bDriverStopped, padapter->bSurpriseRemoved));		
++		
++	#ifdef CONFIG_PREALLOC_RECV_SKB
++		precvbuf->reuse = _TRUE;
++	#else
++		if(precvbuf->pskb){
++			DBG_8192C("==> free skb(%p)\n",precvbuf->pskb);
++			rtw_skb_free(precvbuf->pskb);
++		}	
++	#endif
++		DBG_8192C("%s()-%d: RX Warning! bDriverStopped(%d) OR bSurpriseRemoved(%d) bReadPortCancel(%d)\n", 
++		__FUNCTION__, __LINE__,padapter->bDriverStopped, padapter->bSurpriseRemoved,padapter->bReadPortCancel);	
++		goto exit;
++	}
++
++	if(purb->status==0)//SUCCESS
++	{
++		if ((purb->actual_length > MAX_RECVBUF_SZ) || (purb->actual_length < RXDESC_SIZE))
++		{
++			RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete: (purb->actual_length > MAX_RECVBUF_SZ) || (purb->actual_length < RXDESC_SIZE)\n"));
++			precvbuf->reuse = _TRUE;
++			rtw_read_port(padapter, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf);
++			DBG_8192C("%s()-%d: RX Warning!\n", __FUNCTION__, __LINE__);	
++		}
++		else 
++		{	
++			rtw_reset_continual_urb_error(adapter_to_dvobj(padapter));
++			
++			precvbuf->transfer_len = purb->actual_length;			
++			skb_put(precvbuf->pskb, purb->actual_length);	
++			skb_queue_tail(&precvpriv->rx_skb_queue, precvbuf->pskb);
++
++			if (skb_queue_len(&precvpriv->rx_skb_queue)<=1)
++				tasklet_schedule(&precvpriv->recv_tasklet);
++
++			precvbuf->pskb = NULL;
++			precvbuf->reuse = _FALSE;
++			rtw_read_port(padapter, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf);			
++		}		
++	}
++	else
++	{
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete : purb->status(%d) != 0 \n", purb->status));
++	
++		DBG_8192C("###=> usb_read_port_complete => urb status(%d)\n", purb->status);
++
++		if(rtw_inc_and_chk_continual_urb_error(adapter_to_dvobj(padapter)) == _TRUE ){
++			padapter->bSurpriseRemoved = _TRUE;
++		}
++
++		switch(purb->status) {
++			case -EINVAL:
++			case -EPIPE:			
++			case -ENODEV:
++			case -ESHUTDOWN:
++				//padapter->bSurpriseRemoved=_TRUE;
++				RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete:bSurpriseRemoved=TRUE\n"));
++			case -ENOENT:
++				padapter->bDriverStopped=_TRUE;			
++				RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete:bDriverStopped=TRUE\n"));
++				break;
++			case -EPROTO:
++			case -EILSEQ:
++			case -ETIME:
++			case -ECOMM:
++			case -EOVERFLOW:
++				#ifdef DBG_CONFIG_ERROR_DETECT	
++				{	
++					HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++					pHalData->srestpriv.Wifi_Error_Status = USB_READ_PORT_FAIL;			
++				}
++				#endif
++				precvbuf->reuse = _TRUE;
++				rtw_read_port(padapter, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf);			
++				break;
++			case -EINPROGRESS:
++				precvpriv->read_port_complete_EINPROGRESS_cnt++;
++				DBG_8192C("ERROR: URB IS IN PROGRESS!/n");
++				break;
++			default:
++				precvpriv->read_port_complete_other_urb_err_cnt++;
++				break;				
++		}
++		
++	}	
++
++exit:	
++	
++_func_exit_;
++	
++}
++
++static u32 usb_read_port(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *rmem)
++{	
++	_irqL irqL;
++	int err;
++	unsigned int pipe;
++	SIZE_PTR tmpaddr=0;
++	SIZE_PTR alignment=0;
++	u32 ret = _SUCCESS;
++	PURB purb = NULL;
++	struct recv_buf	*precvbuf = (struct recv_buf *)rmem;
++	_adapter		*adapter = pintfhdl->padapter;
++	struct dvobj_priv	*pdvobj = adapter_to_dvobj(adapter);
++	struct recv_priv	*precvpriv = &adapter->recvpriv;
++	struct usb_device	*pusbd = pdvobj->pusbdev;
++	
++_func_enter_;
++	
++	if(adapter->bDriverStopped || adapter->bSurpriseRemoved ||adapter->pwrctrlpriv.pnp_bstop_trx)
++	{
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port:( padapter->bDriverStopped ||padapter->bSurpriseRemoved ||adapter->pwrctrlpriv.pnp_bstop_trx)!!!\n"));
++		return _FAIL;
++	}
++
++#ifdef CONFIG_PREALLOC_RECV_SKB
++	if((precvbuf->reuse == _FALSE) || (precvbuf->pskb == NULL))
++	{
++		if (NULL != (precvbuf->pskb = skb_dequeue(&precvpriv->free_recv_skb_queue)))
++		{
++			precvbuf->reuse = _TRUE;
++		}
++	}
++#endif
++	
++
++	if(precvbuf !=NULL)
++	{	
++		rtl8192cu_init_recvbuf(adapter, precvbuf);		
++
++		//re-assign for linux based on skb
++		if((precvbuf->reuse == _FALSE) || (precvbuf->pskb == NULL))
++		{
++			precvbuf->pskb = rtw_skb_alloc(MAX_RECVBUF_SZ + RECVBUFF_ALIGN_SZ);
++
++			if(precvbuf->pskb == NULL)		
++			{
++				RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("init_recvbuf(): alloc_skb fail!\n"));
++				precvpriv->recvbuf_skb_alloc_fail_cnt++;
++				return _FAIL;
++			}	
++
++			tmpaddr = (SIZE_PTR)precvbuf->pskb->data;
++	        	alignment = tmpaddr & (RECVBUFF_ALIGN_SZ-1);
++			skb_reserve(precvbuf->pskb, (RECVBUFF_ALIGN_SZ - alignment));
++
++			precvbuf->phead = precvbuf->pskb->head;
++		   	precvbuf->pdata = precvbuf->pskb->data;
++			precvbuf->ptail = skb_tail_pointer(precvbuf->pskb);
++			precvbuf->pend = skb_end_pointer(precvbuf->pskb);
++			precvbuf->pbuf = precvbuf->pskb->data;
++		}	
++		else//reuse skb
++		{
++			precvbuf->phead = precvbuf->pskb->head;
++			precvbuf->pdata = precvbuf->pskb->data;
++			precvbuf->ptail = skb_tail_pointer(precvbuf->pskb);
++			precvbuf->pend = skb_end_pointer(precvbuf->pskb);
++       		precvbuf->pbuf = precvbuf->pskb->data;
++
++			precvbuf->reuse = _FALSE;
++		}
++
++		//_enter_critical(&precvpriv->lock, &irqL);
++		//precvpriv->rx_pending_cnt++;
++		//precvbuf->irp_pending = _TRUE;
++		//_exit_critical(&precvpriv->lock, &irqL);
++
++		precvpriv->rx_pending_cnt++;
++
++		purb = precvbuf->purb;
++
++		//translate DMA FIFO addr to pipehandle
++		pipe = ffaddr2pipehdl(pdvobj, addr);
++
++		usb_fill_bulk_urb(purb, pusbd, pipe, 
++						precvbuf->pbuf,
++                				MAX_RECVBUF_SZ,
++                				usb_read_port_complete,
++                				precvbuf);//context is precvbuf
++
++		err = usb_submit_urb(purb, GFP_ATOMIC);
++		if((err) && (err != (-EPERM)))
++		{
++			RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("cannot submit rx in-token(err=0x%.8x), URB_STATUS =0x%.8x", err, purb->status));
++			DBG_8192C("cannot submit rx in-token(err = 0x%08x),urb_status = %d\n",err,purb->status);
++			ret = _FAIL;
++		}
++	}
++	else
++	{
++		precvpriv->recvbuf_null_cnt++;
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port:precvbuf ==NULL\n"));
++		ret = _FAIL;
++	}
++
++_func_exit_;
++
++	return ret;
++}
++#endif	// CONFIG_USE_USB_BUFFER_ALLOC_RX
++
++void rtl8192cu_xmit_tasklet(void *priv)
++{	
++	int ret = _FALSE;
++	_adapter *padapter = (_adapter*)priv;
++	struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
++
++	if(check_fwstate(&padapter->mlmepriv, _FW_UNDER_SURVEY) == _TRUE)
++		return;
++
++	while(1)
++	{
++		if ((padapter->bDriverStopped == _TRUE)||(padapter->bSurpriseRemoved== _TRUE) || (padapter->bWritePortCancel == _TRUE))
++		{
++			DBG_8192C("xmit_tasklet => bDriverStopped or bSurpriseRemoved or bWritePortCancel\n");
++			break;
++		}
++
++		ret = rtl8192cu_xmitframe_complete(padapter, pxmitpriv, NULL);
++
++		if(ret==_FALSE)
++			break;
++		
++	}
++	
++}
++
++void rtl8192cu_set_intf_ops(struct _io_ops	*pops)
++{
++	_func_enter_;
++	
++	_rtw_memset((u8 *)pops, 0, sizeof(struct _io_ops));	
++
++	pops->_read8 = &usb_read8;
++	pops->_read16 = &usb_read16;
++	pops->_read32 = &usb_read32;
++	pops->_read_mem = &usb_read_mem;
++	pops->_read_port = &usb_read_port;	
++	
++	pops->_write8 = &usb_write8;
++	pops->_write16 = &usb_write16;
++	pops->_write32 = &usb_write32;
++	pops->_writeN = &usb_writeN;
++	
++#ifdef CONFIG_USB_SUPPORT_ASYNC_VDN_REQ	
++	pops->_write8_async= &usb_async_write8;
++	pops->_write16_async = &usb_async_write16;
++	pops->_write32_async = &usb_async_write32;
++#endif	
++	pops->_write_mem = &usb_write_mem;
++	pops->_write_port = &usb_write_port;
++
++	pops->_read_port_cancel = &usb_read_port_cancel;
++	pops->_write_port_cancel = &usb_write_port_cancel;
++
++#ifdef CONFIG_USB_INTERRUPT_IN_PIPE
++	pops->_read_interrupt = &usb_read_interrupt;
++#endif
++
++	_func_exit_;
++
++}
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/usb_ops_xp.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/usb_ops_xp.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/usb_ops_xp.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/hal/rtl8192c/usb/usb_ops_xp.c	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,1265 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _HCI_OPS_OS_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <osdep_intf.h>
++#include <circ_buf.h>
++
++#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS)
++	#error "Shall be Linux or Windows, but not both!\n"
++#endif
++
++#ifndef CONFIG_USB_HCI
++	#error "CONFIG_USB_HCI shall be on!\n"
++#endif
++
++
++#include <usb.h>
++#include <usbdlib.h>
++#include <usbioctl.h>
++
++#include <usb_ops.h>
++#include <recv_osdep.h>
++
++#include <usb_osintf.h>
++
++
++struct zero_bulkout_context
++{
++	void *pbuf;
++	void *purb;
++	void *pirp;
++	void *padapter;
++};
++
++#define usb_write_cmd usb_write_mem 
++#define usb_read_cmd usb_read_mem
++#define usb_write_cmd_complete usb_write_mem_complete
++//#define usb_read_cmd_complete usb_read_mem_complete
++
++
++
++uint usb_init_intf_priv(struct intf_priv *pintfpriv)
++{
++	        
++	PURB	piorw_urb;
++	u8		NextDeviceStackSize;
++	struct dvobj_priv   *pdev = (struct dvobj_priv   *)pintfpriv->intf_dev;
++	_adapter * padapter=pdev->padapter;
++
++_func_enter_;
++	
++	RT_TRACE(_module_hci_ops_os_c_,_drv_info_,("\n +usb_init_intf_priv\n"));
++
++	pintfpriv->intf_status = _IOREADY;
++
++       if(pdev->ishighspeed) pintfpriv->max_iosz =  128;
++	else pintfpriv->max_iosz =  64;	
++
++
++	_init_timer(&pintfpriv->io_timer, padapter->hndis_adapter, io_irp_timeout_handler, pintfpriv);
++
++	
++	RT_TRACE(_module_hci_ops_os_c_,_drv_info_,("usb_init_intf_priv:pintfpriv->max_iosz:%d\n",pintfpriv->max_iosz));
++
++	pintfpriv->io_wsz = 0;
++	pintfpriv->io_rsz = 0;	
++	
++ 	pintfpriv->allocated_io_rwmem = rtw_zmalloc(pintfpriv->max_iosz +4); 
++	
++   	if (pintfpriv->allocated_io_rwmem == NULL){
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n usb_init_intf_priv:pintfpriv->allocated_io_rwmem == NULL\n"));
++    		goto usb_init_intf_priv_fail;
++   	}
++
++	pintfpriv->io_rwmem = pintfpriv->allocated_io_rwmem +  4 \
++					-( (u32)(pintfpriv->allocated_io_rwmem) & 3);
++	
++
++     
++     NextDeviceStackSize = (u8)pdev->nextdevstacksz;//pintfpriv->pUsbDevObj->StackSize + 1; 
++
++      piorw_urb = (PURB)ExAllocatePool(NonPagedPool, sizeof(URB) ); 
++      if(piorw_urb == NULL) 
++	  goto usb_init_intf_priv_fail;
++	  
++      pintfpriv->piorw_urb = piorw_urb;
++
++      pintfpriv->piorw_irp = IoAllocateIrp(NextDeviceStackSize , FALSE);	 
++    
++
++      pintfpriv->io_irp_cnt=1;
++      pintfpriv->bio_irp_pending=_FALSE;
++	 
++     _rtw_init_sema(&(pintfpriv->io_retevt), 0);//NdisInitializeEvent(&pintfpriv->io_irp_return_evt);
++
++_func_exit_;
++	return _SUCCESS;
++
++usb_init_intf_priv_fail:
++
++	if (pintfpriv->allocated_io_rwmem)
++		rtw_mfree((u8 *)(pintfpriv->allocated_io_rwmem), pintfpriv->max_iosz +4);
++	
++	if(piorw_urb)
++		ExFreePool(piorw_urb);	
++
++	RT_TRACE(_module_hci_ops_os_c_,_drv_info_,("\n -usb_init_intf_priv(usb_init_intf_priv_fail)\n"));
++
++_func_exit_;	
++	return _FAIL;
++		
++}
++
++void usb_unload_intf_priv(struct intf_priv *pintfpriv)
++{
++
++_func_enter_;
++	
++	RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n+usb_unload_intf_priv\n"));
++	
++	rtw_mfree((u8 *)(pintfpriv->allocated_io_rwmem), pintfpriv->max_iosz+4);
++	
++#ifdef PLATFORM_WINDOWS
++	if(pintfpriv->piorw_urb)
++		ExFreePool(pintfpriv->piorw_urb);	
++
++	if(pintfpriv->piorw_irp)
++		IoFreeIrp(pintfpriv->piorw_irp);
++#endif		
++
++
++#ifdef PLATFORM_LINUX
++	RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\npintfpriv->io_irp_cnt=%d\n",pintfpriv->io_irp_cnt));
++	pintfpriv->io_irp_cnt--;
++	if(pintfpriv->io_irp_cnt){
++		if(pintfpriv->bio_irp_pending==_TRUE){
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\nkill iorw_urb\n"));
++		usb_kill_urb(pintfpriv->piorw_urb);
++		}
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n wait io_retevt\n"));
++		_rtw_down_sema(&(pintfpriv->io_retevt));
++	}
++	RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n cancel io_urb ok\n"));
++#endif
++
++	RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n-usb_unload_intf_priv\n"));
++
++_func_exit_;
++	
++}
++
++void *ffaddr2pipehdl(struct dvobj_priv *pNdisCEDvice, u32 addr)
++{
++	HANDLE PipeHandle = NULL;
++	_adapter	*padapter = pNdisCEDvice->padapter;
++
++	
++	if(pNdisCEDvice->nr_endpoint == 11)
++	{		
++		switch(addr)
++		{	    
++	     		case RTL8712_DMA_BEQ:
++		 		PipeHandle= padapter->halpriv.pipehdls_r8712[3] ; 
++				break;
++	     		case RTL8712_DMA_BKQ:
++			 	PipeHandle=  padapter->halpriv.pipehdls_r8712[4]; 
++				break;
++	     		case RTL8712_DMA_VIQ:
++		 		PipeHandle=  padapter->halpriv.pipehdls_r8712[2]; 
++				break;
++	    		case RTL8712_DMA_VOQ:
++				PipeHandle=  padapter->halpriv.pipehdls_r8712[1]; 
++				break;					
++                     case RTL8712_DMA_BCNQ:	
++				PipeHandle=  padapter->halpriv.pipehdls_r8712[6]; 
++				break;	 	
++			case RTL8712_DMA_BMCQ:	//HI Queue
++				PipeHandle=  padapter->halpriv.pipehdls_r8712[7]; 
++				break;	
++			case RTL8712_DMA_MGTQ:				
++		 		PipeHandle=  padapter->halpriv.pipehdls_r8712[8]; 
++				break;
++                     case RTL8712_DMA_RX0FF:
++				PipeHandle=  padapter->halpriv.pipehdls_r8712[0]; 
++				break;	 	
++			case RTL8712_DMA_C2HCMD:		 	
++				PipeHandle=  padapter->halpriv.pipehdls_r8712[5]; 
++				break;
++			case RTL8712_DMA_H2CCMD:
++				PipeHandle=  padapter->halpriv.pipehdls_r8712[9]; 
++				break;	
++				
++		}
++
++	}
++	else if(pNdisCEDvice->nr_endpoint == 6)
++	{
++		switch(addr)
++		{	    
++	     		case RTL8712_DMA_BEQ:
++		 		PipeHandle=  padapter->halpriv.pipehdls_r8712[3]; 
++				break;
++	     		case RTL8712_DMA_BKQ:
++			 	PipeHandle=  padapter->halpriv.pipehdls_r8712[4]; 
++				break;
++	     		case RTL8712_DMA_VIQ:
++		 		PipeHandle=  padapter->halpriv.pipehdls_r8712[2]; 
++				break;
++	    		case RTL8712_DMA_VOQ:                   		
++		 		PipeHandle=  padapter->halpriv.pipehdls_r8712[1]; 
++				break;
++                     case RTL8712_DMA_RX0FF:
++			case RTL8712_DMA_C2HCMD:		 	
++				PipeHandle=  padapter->halpriv.pipehdls_r8712[0]; 
++				break;
++			case RTL8712_DMA_H2CCMD:
++			case RTL8712_DMA_BCNQ:					
++			case RTL8712_DMA_BMCQ:	
++			case RTL8712_DMA_MGTQ:			
++				PipeHandle=  padapter->halpriv.pipehdls_r8712[5]; 
++				break;	
++				
++		}
++
++	}
++	else if(pNdisCEDvice->nr_endpoint == 4)
++	{
++		switch(addr)
++		{		
++	     		case RTL8712_DMA_BEQ:
++		 	//case RTL8712_DMA_BKQ:
++			 	PipeHandle=  padapter->halpriv.pipehdls_r8712[2]; 
++				break;
++	     		//case RTL8712_DMA_VIQ:
++		 	case RTL8712_DMA_VOQ:					
++		 		PipeHandle=  padapter->halpriv.pipehdls_r8712[1]; 
++				break;
++			case RTL8712_DMA_RX0FF:
++			case RTL8712_DMA_C2HCMD:		 	
++				PipeHandle=  padapter->halpriv.pipehdls_r8712[0]; 
++				break;
++			case RTL8712_DMA_H2CCMD:	
++			case RTL8712_DMA_BCNQ:					
++			case RTL8712_DMA_BMCQ:	
++			case RTL8712_DMA_MGTQ:				
++				PipeHandle=  padapter->halpriv.pipehdls_r8712[3]; 
++				break;	
++		}
++	
++	}
++	else
++	{
++	   RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("ffaddr2pipehdl():nr_endpoint=%d error!\n", pNdisCEDvice->nr_endpoint));	   
++	}
++		
++	return PipeHandle;
++
++}
++
++
++NTSTATUS usb_bulkout_zero_complete(
++	PDEVICE_OBJECT	pUsbDevObj, 
++	PIRP		pIrp, void*	pZeroContext)
++{	
++	struct zero_bulkout_context *pcontext = (struct zero_bulkout_context *)pZeroContext;
++			   
++_func_enter_;
++
++	if(pcontext)
++	{
++		if(pcontext->pbuf)
++		{
++			ExFreePool(pcontext->pbuf);	  
++		}	
++
++		if(pcontext->purb)
++		{
++			ExFreePool(pcontext->purb);	
++		}
++
++		if(pcontext->pirp && (pIrp ==pcontext->pirp))
++		{			
++			IoFreeIrp(pIrp);
++		}
++
++		ExFreePool(pcontext);	
++	}	
++
++_func_exit_;
++
++	return STATUS_MORE_PROCESSING_REQUIRED;
++	
++
++}
++
++u32 usb_bulkout_zero(struct intf_hdl *pintfhdl, u32 addr)
++{	
++	struct zero_bulkout_context *pcontext;
++	unsigned char *pbuf;
++	char NextDeviceStackSize, len;
++	PIO_STACK_LOCATION	nextStack;
++	USBD_STATUS		usbdstatus;
++	HANDLE				PipeHandle;	
++	PIRP					pirp = NULL;
++	PURB				purb = NULL;	
++	NDIS_STATUS			ndisStatus = NDIS_STATUS_SUCCESS;
++	_adapter *padapter = (_adapter *)pintfhdl->adapter;
++	struct dvobj_priv	*pdvobj = (struct dvobj_priv *)&padapter->dvobjpriv;	
++
++
++_func_enter_;
++
++	if((padapter->bDriverStopped) || (padapter->bSurpriseRemoved) ||(padapter->pwrctrlpriv.pnp_bstop_trx))
++	{		
++		return _FAIL;
++	}
++
++	len = 0;
++	NextDeviceStackSize = (char)pdvobj->nextdevstacksz;
++
++	pcontext = (struct zero_bulkout_context *)ExAllocatePool(NonPagedPool, sizeof(struct zero_bulkout_context));
++	pbuf = (unsigned char *)ExAllocatePool(NonPagedPool, sizeof(int));	
++    	purb = (PURB)ExAllocatePool(NonPagedPool, sizeof(URB));
++      	pirp = IoAllocateIrp(NextDeviceStackSize, FALSE);
++
++	pcontext->pbuf = pbuf;
++	pcontext->purb = purb;
++	pcontext->pirp = pirp;
++	pcontext->padapter = padapter;
++                    
++	//translate DMA FIFO addr to pipehandle
++	PipeHandle = ffaddr2pipehdl(pdvobj, addr);	
++
++
++	// Build our URB for USBD
++	UsbBuildInterruptOrBulkTransferRequest(
++				purb,
++				sizeof(struct _URB_BULK_OR_INTERRUPT_TRANSFER),
++				PipeHandle,
++				pbuf, 
++				NULL, 
++				len, 
++				0, 
++				NULL);
++	
++	//
++	// call the calss driver to perform the operation
++	// pass the URB to the USB driver stack
++	//
++	nextStack = IoGetNextIrpStackLocation(pirp);
++	nextStack->MajorFunction = IRP_MJ_INTERNAL_DEVICE_CONTROL;
++	nextStack->Parameters.Others.Argument1 = purb;
++	nextStack->Parameters.DeviceIoControl.IoControlCode = IOCTL_INTERNAL_USB_SUBMIT_URB;
++
++	//Set Completion Routine
++	IoSetCompletionRoutine(pirp,					// irp to use
++				               usb_bulkout_zero_complete,	// callback routine
++				               pcontext,				// context 
++				               TRUE,					// call on success
++				               TRUE,					// call on error
++				               TRUE);					// call on cancel
++
++	
++	// Call IoCallDriver to send the irp to the usb bus driver
++	//
++	ndisStatus = IoCallDriver(pdvobj->pnextdevobj, pirp);
++	usbdstatus = URB_STATUS(purb);
++
++	if( USBD_HALTED(usbdstatus) )
++	{		
++		padapter->bDriverStopped=_TRUE;
++		padapter->bSurpriseRemoved=_TRUE;
++	}
++
++	//
++	// The usb bus driver should always return STATUS_PENDING when bulk out irp async
++	//
++	if ( ndisStatus != STATUS_PENDING )
++	{		
++		return _FAIL;
++	} 	
++	
++_func_exit_;
++	
++	return _SUCCESS;
++
++}
++
++void usb_read_mem(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *rmem)
++{
++	_func_enter_;
++	
++
++	
++	_func_exit_;
++}
++
++NTSTATUS usb_write_mem_complete(PDEVICE_OBJECT	pUsbDevObj, PIRP piowrite_irp, PVOID pusb_cnxt)
++{
++		
++	_irqL irqL;
++	_list	*head, *plist;
++	struct io_req	*pio_req;	
++	struct io_queue *pio_q = (struct io_queue *) pusb_cnxt;
++	struct intf_hdl *pintf = &(pio_q->intf);	
++	struct intf_priv *pintfpriv = pintf->pintfpriv;	
++	_adapter *padapter = (_adapter *)pintf->adapter;
++	NTSTATUS status = STATUS_SUCCESS;
++
++	head = &(pio_q->processing);
++	
++	_func_enter_;
++	
++	_enter_critical_bh(&(pio_q->lock), &irqL);
++	
++	pintfpriv->io_irp_cnt--;
++	if(pintfpriv->io_irp_cnt ==0){		
++		_rtw_up_sema(&(pintfpriv->io_retevt));
++	}	
++	
++	pintfpriv->bio_irp_pending=_FALSE;
++	
++	switch(piowrite_irp->IoStatus.Status)
++	{		
++		case STATUS_SUCCESS:
++			break;
++			
++		default:
++			padapter->bSurpriseRemoved=_TRUE;
++			RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n usbAsynIntOutComplete:pioread_irp->IoStatus.Status !=STATUS_SUCCESS\n"));
++			break;
++	}				
++
++	//free irp in processing list...	
++	while(rtw_is_list_empty(head) != _TRUE)
++	{
++		plist = get_next(head);	
++		rtw_list_delete(plist);
++		pio_req = LIST_CONTAINOR(plist, struct io_req, list);
++		_rtw_up_sema(&pio_req->sema);
++	}	
++						
++	_exit_critical_bh(&(pio_q->lock), &irqL);
++
++	_func_exit_;
++	
++	return STATUS_MORE_PROCESSING_REQUIRED;
++
++}
++
++void usb_write_mem(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *wmem)
++{
++	u32 bwritezero;
++	_irqL	irqL;
++	USBD_STATUS			usbdstatus;		
++	PIO_STACK_LOCATION		nextStack;
++	HANDLE				PipeHandle;	
++	struct io_req *pio_req;
++	
++	_adapter *adapter = (_adapter *)pintfhdl->adapter;
++	struct intf_priv *pintfpriv = pintfhdl->pintfpriv;
++	struct dvobj_priv   *pdev = (struct dvobj_priv   *)pintfpriv->intf_dev;      
++	PURB	piorw_urb = pintfpriv->piorw_urb;
++	PIRP		piorw_irp  = pintfpriv->piorw_irp; 	
++	struct io_queue	*pio_queue = (struct io_queue *)adapter->pio_queue;	
++	NTSTATUS NtStatus = STATUS_SUCCESS;	
++	
++	_func_enter_;	
++
++	pio_req = alloc_ioreq(pio_queue);
++	
++	if ((pio_req == NULL)||(adapter->bSurpriseRemoved)){
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("async_irp_write32 : pio_req =0x%x adapter->bSurpriseRemoved=0x%x",pio_req,adapter->bSurpriseRemoved ));
++		goto exit;
++	}	
++	
++	_enter_critical_bh(&(pio_queue->lock), &irqL);
++	
++	rtw_list_insert_tail(&(pio_req->list),&(pio_queue->processing));
++
++
++#ifdef NDIS51_MINIPORT
++	IoReuseIrp(piorw_irp, STATUS_SUCCESS);
++#else
++	piorw_irp->Cancel = _FALSE;
++#endif
++
++	if((adapter->bDriverStopped) || (adapter->bSurpriseRemoved) ||(adapter->pwrctrlpriv.pnp_bstop_trx))	
++	{
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\npadapter->pwrctrlpriv.pnp_bstop_trx==_TRUE\n"));
++		_func_exit_;
++		return;
++	}
++
++	//translate DMA FIFO addr to pipehandle
++	PipeHandle = ffaddr2pipehdl(pdev, addr);	
++
++	
++	pintfpriv->io_irp_cnt++;
++	pintfpriv->bio_irp_pending=_TRUE;	
++	// Build our URB for USBD
++	UsbBuildInterruptOrBulkTransferRequest(
++				piorw_urb,
++				sizeof(struct _URB_BULK_OR_INTERRUPT_TRANSFER),
++				PipeHandle,
++				(PVOID)wmem,
++				NULL, 
++				cnt, 
++				0, 
++				NULL);  
++
++	//
++	// call the calss driver to perform the operation
++	// pass the URB to the USB driver stack
++	//
++	nextStack = IoGetNextIrpStackLocation(piorw_irp);
++	nextStack->MajorFunction = IRP_MJ_INTERNAL_DEVICE_CONTROL;
++	nextStack->Parameters.Others.Argument1 = (PURB)piorw_urb;
++	nextStack->Parameters.DeviceIoControl.IoControlCode = IOCTL_INTERNAL_USB_SUBMIT_URB;
++
++	IoSetCompletionRoutine(
++				piorw_irp,				// irp to use				
++				usb_write_mem_complete,		// routine to call when irp is done
++				pio_queue,				// context to pass routine
++				TRUE,					// call on success
++				TRUE,					// call on error
++				TRUE);					// call on cancel
++	
++	// 
++	// Call IoCallDriver to send the irp to the usb port
++	//
++	NtStatus	= IoCallDriver(pdev->pnextdevobj, piorw_irp);
++	usbdstatus = URB_STATUS(piorw_urb);
++
++	//
++	// The USB driver should always return STATUS_PENDING when
++	// it receives a write irp
++	//
++	if ((NtStatus != STATUS_PENDING) || USBD_HALTED(usbdstatus) ) {
++
++		if( USBD_HALTED(usbdstatus) ) {
++
++			RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_mem():USBD_HALTED(usbdstatus)=%X!\n",USBD_HALTED(usbdstatus)) );
++		}
++		_func_exit_;
++		return;//STATUS_UNSUCCESSFUL;
++	}
++
++	_exit_critical_bh(&(pio_queue->lock), &irqL);
++	
++	_rtw_down_sema(&pio_req->sema);	
++	free_ioreq(pio_req, pio_queue);
++	
++
++	bwritezero = _FALSE;
++       if (pdev->ishighspeed)
++	{
++		if(cnt> 0 && cnt%512 == 0)
++			bwritezero = _TRUE;
++			
++	}
++	else
++	{
++		if(cnt > 0 && cnt%64 == 0)
++			bwritezero = _TRUE;		
++	}
++
++	
++	if(bwritezero == _TRUE)
++	{
++		usb_bulkout_zero(pintfhdl, addr);
++	}
++	
++exit:
++	
++	_func_exit_;
++	
++}
++
++NTSTATUS usb_read_port_complete(PDEVICE_OBJECT pUsbDevObj, PIRP pIrp, PVOID context)
++{	
++	uint isevt, *pbuf;
++	struct _URB_BULK_OR_INTERRUPT_TRANSFER	*pbulkurb;
++	USBD_STATUS		usbdstatus;	
++	struct recv_buf		*precvbuf = (struct recv_buf *)context;	
++	_adapter 				*adapter =(_adapter *)precvbuf->adapter;
++	struct recv_priv		*precvpriv = &adapter->recvpriv;
++	struct dvobj_priv   	*dev = (struct dvobj_priv   *)&adapter->dvobjpriv;
++	PURB				purb = precvbuf->purb;
++	struct intf_hdl 		*pintfhdl = &adapter->pio_queue->intf;
++	
++	//RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete!!!\n"));
++
++	usbdstatus = URB_STATUS(purb);
++	
++	_rtw_spinlock_ex(&precvpriv->lock);
++	precvbuf->irp_pending=_FALSE;
++	precvpriv->rx_pending_cnt --;
++	_rtw_spinunlock_ex(&precvpriv->lock);	
++	
++	if(precvpriv->rx_pending_cnt== 0) {		
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete: rx_pending_cnt== 0, set allrxreturnevt!\n"));
++		_rtw_up_sema(&precvpriv->allrxreturnevt);	
++	}
++
++
++	if( pIrp->Cancel == _TRUE ) {
++		
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete: One IRP has been cancelled succesfully\n"));
++		return STATUS_MORE_PROCESSING_REQUIRED;
++	}
++	if(adapter->bSurpriseRemoved) {
++
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete:bDriverStopped(%d) OR bSurpriseRemoved(%d)", adapter->bDriverStopped, adapter->bSurpriseRemoved));
++		return STATUS_MORE_PROCESSING_REQUIRED;
++	}
++
++	switch(pIrp->IoStatus.Status) 
++	{
++		case STATUS_SUCCESS:
++			
++			pbulkurb = &(precvbuf->purb)->UrbBulkOrInterruptTransfer;
++			if((pbulkurb->TransferBufferLength >(MAX_RECVBUF_SZ)) || (pbulkurb->TransferBufferLength < RXDESC_SIZE) ) 
++			{								
++				RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n usb_read_port_complete: (pbulkurb->TransferBufferLength > MAX_RECVBUF_SZ) || (pbulkurb->TransferBufferLength < RXDESC_SIZE)\n"));
++				rtw_read_port(adapter, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf);
++			}
++			else 
++			{	
++			       precvbuf->transfer_len = pbulkurb->TransferBufferLength;
++
++				pbuf = (uint*)precvbuf->pbuf;
++
++				if((isevt = *(pbuf+1)&0x1ff) == 0x1ff)
++				{								
++					rxcmd_event_hdl(adapter, pbuf);//rx c2h events
++					
++					rtw_read_port(adapter, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf);
++				}
++				else
++				{
++					if(recvbuf2recvframe(adapter, precvbuf)==_FAIL)//rx packets
++					{
++						//precvbuf->reuse = _TRUE;		
++						rtw_read_port(adapter, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf);
++					}
++				}
++				
++			}
++	
++			break;
++			
++		default:
++			
++			if( !USBD_HALTED(usbdstatus) )
++			{				
++				RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n usb_read_port_complete():USBD_HALTED(usbdstatus)=%x  (need to handle ) \n",USBD_HALTED(usbdstatus)));				
++			
++			}
++			else 
++			{				
++				RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n usb_read_port_complete(): USBD_HALTED(usbdstatus)=%x \n\n", USBD_HALTED(usbdstatus)) );
++				adapter->bDriverStopped = _TRUE;
++				adapter->bSurpriseRemoved = _TRUE;
++				RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_complete(): USBD_HALTED(usbdstatus)=%x \n\n", USBD_HALTED(usbdstatus))) ;
++			}
++
++		      break;
++			  
++	}
++
++	return STATUS_MORE_PROCESSING_REQUIRED;
++	
++}
++
++u32 usb_read_port(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *rmem)
++{
++	u8 					*pdata;
++	u16					size;
++	PURB				purb;
++	PIRP					pirp;
++	PIO_STACK_LOCATION	nextStack;
++	NTSTATUS			ntstatus;
++	USBD_STATUS		usbdstatus;
++	HANDLE				PipeHandle;	
++	struct recv_buf		*precvbuf = (struct recv_buf *)rmem;
++	struct intf_priv		*pintfpriv = pintfhdl->pintfpriv;
++	struct dvobj_priv		*pdev = (struct dvobj_priv   *)pintfpriv->intf_dev;
++	_adapter				*adapter = (_adapter *)pdev->padapter;
++	struct recv_priv		*precvpriv = &adapter->recvpriv;
++	u32					bResult = _FALSE;
++
++_func_enter_;
++	
++	if(adapter->bDriverStopped || adapter->bSurpriseRemoved ||adapter->pwrctrlpriv.pnp_bstop_trx) {
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port:( padapter->bDriverStopped ||padapter->bSurpriseRemoved ||adapter->pwrctrlpriv.pnp_bstop_trx)!!!\n"));
++		return bResult;
++	}
++
++	if(precvbuf !=NULL)
++	{
++
++		rtl8192cu_init_recvbuf(adapter, precvbuf);
++	
++		_rtw_spinlock(&precvpriv->lock);
++		precvpriv->rx_pending_cnt++;
++		precvbuf->irp_pending = _TRUE;
++		_rtw_spinunlock(&precvpriv->lock);
++
++	       pdata = (u8*)precvbuf->pbuf;
++
++		size	 = sizeof( struct _URB_BULK_OR_INTERRUPT_TRANSFER );
++		purb = precvbuf->purb;	
++
++		//translate DMA FIFO addr to pipehandle
++		PipeHandle = ffaddr2pipehdl(pdev, addr);	
++		 
++		UsbBuildInterruptOrBulkTransferRequest(
++			purb,
++			(USHORT)size,
++			PipeHandle,
++			pdata,
++			NULL, 
++			MAX_RECVBUF_SZ,
++			USBD_TRANSFER_DIRECTION_IN | USBD_SHORT_TRANSFER_OK, 
++			NULL
++			);
++
++		pirp = precvbuf->pirp;
++
++#if NDIS51_MINIPORT
++		IoReuseIrp(pirp, STATUS_SUCCESS);
++#else
++		pirp->Cancel = _FALSE;
++#endif
++
++		// call the class driver to perform the operation
++		// and pass the URB to the USB driver stack
++		nextStack = IoGetNextIrpStackLocation(pirp);
++		nextStack->Parameters.Others.Argument1 = purb;
++		nextStack->Parameters.DeviceIoControl.IoControlCode = IOCTL_INTERNAL_USB_SUBMIT_URB;
++		nextStack->MajorFunction = IRP_MJ_INTERNAL_DEVICE_CONTROL;
++
++		IoSetCompletionRoutine(
++			pirp,					// irp to use
++			usb_read_port_complete,	// routine to call when irp is done
++			precvbuf,					// context to pass routine 
++			TRUE,					// call on success
++			TRUE,					// call on error
++			TRUE);					// call on cancel
++
++		//
++		// The IoCallDriver routine  
++		// sends an IRP to the driver associated with a specified device object.
++		//
++		ntstatus = IoCallDriver(pdev->pnextdevobj, pirp);
++		usbdstatus = URB_STATUS(purb);
++
++		if( USBD_HALTED(usbdstatus) ) {
++			RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n usb_read_port(): USBD_HALTED(usbdstatus=0x%.8x)=%.8x  \n\n", usbdstatus, USBD_HALTED(usbdstatus)));
++			pdev->padapter->bDriverStopped=_TRUE;
++			pdev->padapter->bSurpriseRemoved=_TRUE;
++		}
++
++		if( ntstatus == STATUS_PENDING )
++		{ 
++			bResult = _TRUE;// The IRP is pended in USBD as we expected.
++		}
++		else {
++			RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port(): IoCallDriver failed!!! IRP STATUS: %X\n", ntstatus));
++			RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port(): IoCallDriver failed!!! USB STATUS: %X\n", usbdstatus));
++		}
++
++	}
++	else{
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port:precv_frame ==NULL\n"));
++	}
++
++_func_exit_;
++	
++	return bResult;
++	
++}
++
++void usb_read_port_cancel(_adapter *padapter)
++{	
++	struct recv_buf  *precvbuf;
++	sint i;
++	struct dvobj_priv   *pdev = &padapter->dvobjpriv;
++	struct recv_priv *precvpriv=&padapter->recvpriv;	
++		
++	RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n ==>usb_read_port_cancel\n"));
++
++	_rtw_spinlock(&precvpriv->lock);
++	precvpriv->rx_pending_cnt--; //decrease 1 for Initialize ++ 
++	_rtw_spinunlock(&precvpriv->lock);
++
++	if (precvpriv->rx_pending_cnt)
++	{
++		// Canceling Pending Recv Irp
++		precvbuf = (struct recv_buf  *)precvpriv->precv_buf;
++		
++		for( i = 0; i < NR_RECVBUFF; i++ )
++		{
++			if (precvbuf->irp_pending == _TRUE)
++			{	
++				IoCancelIrp(precvbuf->pirp);
++				RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_cancel() :IoCancelIrp\n"));
++			}
++			
++			precvbuf++;
++		}
++		
++		_rtw_down_sema(&precvpriv->allrxreturnevt);
++		
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_read_port_cancel:down sema\n"));
++
++	}
++	
++	RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("<==usb_read_port_cancel\n"));
++	
++}
++
++NTSTATUS usb_write_port_complete(
++	PDEVICE_OBJECT	pUsbDevObj,
++	PIRP				pIrp,
++	PVOID			pTxContext
++) 
++{	
++	u32	i, bIrpSuccess, sz;
++	NTSTATUS	status = STATUS_SUCCESS;
++	u8 *ptr;
++	struct xmit_frame	*pxmitframe = (struct xmit_frame *) pTxContext;
++        struct xmit_buf *pxmitbuf = pxmitframe->pxmitbuf;
++	_adapter			*padapter = pxmitframe->padapter;
++	struct dvobj_priv	*pdev =	(struct dvobj_priv *)&padapter->dvobjpriv;	
++	struct io_queue	*pio_queue = (struct io_queue *)padapter->pio_queue;
++	struct intf_hdl	*pintfhdl = &(pio_queue->intf);
++       struct xmit_priv	*pxmitpriv = &padapter->xmitpriv;		
++	   
++_func_enter_;
++
++	RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("+usb_write_port_complete\n"));
++
++	_rtw_spinlock_ex(&pxmitpriv->lock);	
++	pxmitpriv->txirp_cnt--;
++	_rtw_spinunlock_ex(&pxmitpriv->lock);
++	
++	if(pxmitpriv->txirp_cnt==0){
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete: txirp_cnt== 0, set allrxreturnevt!\n"));		
++		_rtw_up_sema(&(pxmitpriv->tx_retevt));
++	}
++	
++	status = pIrp->IoStatus.Status;
++
++	if( status == STATUS_SUCCESS ) 
++		bIrpSuccess = _TRUE;	
++	else	
++		bIrpSuccess = _FALSE;
++	
++	if( pIrp->Cancel == _TRUE )
++	{		
++	    if(pxmitframe !=NULL)
++	    {	       
++	    		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n usb_write_port_complete:pIrp->Cancel == _TRUE,(pxmitframe !=NULL\n"));
++			rtw_free_xmitframe(pxmitpriv, pxmitframe);			
++	    }
++		  	 
++	     return STATUS_MORE_PROCESSING_REQUIRED;
++	}
++
++	if(padapter->bSurpriseRemoved)
++	{
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete:bDriverStopped(%d) OR bSurpriseRemoved(%d)", padapter->bDriverStopped, padapter->bSurpriseRemoved));
++		return STATUS_MORE_PROCESSING_REQUIRED;
++	}
++
++
++	//
++	// Send 0-byte here if necessary.
++	//
++	// <Note> 
++	// 1. We MUST keep at most one IRP pending in each endpoint, otherwise USB host controler driver will hang.
++	// Besides, even 0-byte IRP shall be count into #IRP sent down, so, we send 0-byte here instead of TxFillDescriptor8187().
++	// 2. If we don't count 0-byte IRP into an #IRP sent down, Tx will stuck when we download files via BT and 
++	// play online video on XP SP1 EHCU.
++	// 2005.12.26, by rcnjko.
++	//
++
++	
++	for(i=0; i< 8; i++)
++	{
++            if(pIrp == pxmitframe->pxmit_irp[i])
++            {
++		    pxmitframe->bpending[i] = _FALSE;//
++		    //ac_tag = pxmitframe->ac_tag[i];
++                  sz = pxmitframe->sz[i];
++		    break;		  
++            }
++	}
++
++#if 0	
++	pxmitframe->fragcnt--;
++	if(pxmitframe->fragcnt == 0)// if((pxmitframe->fragcnt == 0) && (pxmitframe->irpcnt == 8)){
++	{
++		//RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n usb_write_port_complete:pxmitframe->fragcnt == 0\n"));
++		rtw_free_xmitframe(pxmitpriv,pxmitframe);	          
++      	}
++#else	
++
++	//not to consider tx fragment
++	rtw_free_xmitframe(pxmitpriv, pxmitframe);		
++
++#endif	
++
++	rtl8192cu_xmitframe_complete(padapter, pxmitpriv, pxmitbuf);
++
++_func_exit_;
++
++	return STATUS_MORE_PROCESSING_REQUIRED;
++
++}
++
++u32 usb_write_port(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *wmem)
++{
++       u32 i, bwritezero;      	
++	u8 *ptr;
++	PIO_STACK_LOCATION	nextStack;
++	USBD_STATUS		usbdstatus;
++	HANDLE				PipeHandle;	
++	PIRP					pirp = NULL;
++	PURB				purb = NULL;	
++	NDIS_STATUS			ndisStatus = NDIS_STATUS_SUCCESS;
++	_adapter *padapter = (_adapter *)pintfhdl->adapter;
++	struct dvobj_priv	*pNdisCEDvice = (struct dvobj_priv   *)&padapter->dvobjpriv;	
++	struct xmit_priv	*pxmitpriv = &padapter->xmitpriv;
++	struct xmit_frame *pxmitframe = (struct xmit_frame *)wmem;
++
++_func_enter_;
++
++	if((padapter->bDriverStopped) || (padapter->bSurpriseRemoved) ||(padapter->pwrctrlpriv.pnp_bstop_trx))
++	{
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port:( padapter->bDriverStopped ||padapter->bSurpriseRemoved ||adapter->pwrctrlpriv.pnp_bstop_trx)!!!\n"));
++		return _FAIL;
++	}
++	
++
++	for(i=0; i<8; i++)
++       {
++		if(pxmitframe->bpending[i] == _FALSE)
++		{
++			_rtw_spinlock(&pxmitpriv->lock);	
++			pxmitpriv->txirp_cnt++;
++			pxmitframe->bpending[i]  = _TRUE;
++			_rtw_spinunlock(&pxmitpriv->lock);
++			
++			pxmitframe->sz[i] = cnt;
++			purb	= pxmitframe->pxmit_urb[i];
++			pirp	= pxmitframe->pxmit_irp[i];
++			
++			//pxmitframe->ac_tag[i] = ac_tag;
++			
++			break;	 
++		}
++       }	
++
++	bwritezero = _FALSE;
++       if (pNdisCEDvice->ishighspeed)
++	{
++		if(cnt> 0 && cnt%512 == 0)
++		{
++			RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("ishighspeed, cnt=%d\n", cnt));
++			//cnt=cnt+1;
++			bwritezero = _TRUE;
++		}	
++	}
++	else
++	{
++		if(cnt > 0 && cnt%64 == 0)
++		{
++			RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("cnt=%d\n", cnt));
++			//cnt=cnt+1;
++			bwritezero = _TRUE;
++		}	
++	}
++	
++
++#ifdef NDIS51_MINIPORT
++	IoReuseIrp(pirp, STATUS_SUCCESS);
++#else
++	pirp->Cancel = _FALSE;
++#endif
++
++
++	//translate DMA FIFO addr to pipehandle
++	PipeHandle = ffaddr2pipehdl(pNdisCEDvice, addr);	
++
++
++	// Build our URB for USBD
++	UsbBuildInterruptOrBulkTransferRequest(
++				purb,
++				sizeof(struct _URB_BULK_OR_INTERRUPT_TRANSFER),
++				PipeHandle,
++				pxmitframe->mem_addr, 
++				NULL, 
++				cnt, 
++				0, 
++				NULL);
++	
++	//
++	// call the calss driver to perform the operation
++	// pass the URB to the USB driver stack
++	//
++	nextStack = IoGetNextIrpStackLocation(pirp);
++	nextStack->MajorFunction = IRP_MJ_INTERNAL_DEVICE_CONTROL;
++	nextStack->Parameters.Others.Argument1 = purb;
++	nextStack->Parameters.DeviceIoControl.IoControlCode = IOCTL_INTERNAL_USB_SUBMIT_URB;
++
++	//Set Completion Routine
++	IoSetCompletionRoutine(pirp,					// irp to use
++				               usb_write_port_complete,	// callback routine
++				               pxmitframe,				// context 
++				               TRUE,					// call on success
++				               TRUE,					// call on error
++				               TRUE);					// call on cancel
++
++	
++	// Call IoCallDriver to send the irp to the usb bus driver
++	//
++	ndisStatus = IoCallDriver(pNdisCEDvice->pnextdevobj, pirp);
++	usbdstatus = URB_STATUS(purb);
++
++	if( USBD_HALTED(usbdstatus) )
++	{
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n usb_write_port(): USBD_HALTED(usbdstatus)=%x set bDriverStopped TRUE!\n\n",USBD_HALTED(usbdstatus)) );
++		padapter->bDriverStopped=_TRUE;
++		padapter->bSurpriseRemoved=_TRUE;
++	}
++
++	//
++	// The usb bus driver should always return STATUS_PENDING when bulk out irp async
++	//
++	if ( ndisStatus != STATUS_PENDING )
++	{
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("\n usb_write_port(): ndisStatus(%x) != STATUS_PENDING!\n\n", ndisStatus));
++		
++		_func_exit_;
++		
++		return _FAIL;
++	} 	
++	
++	if(bwritezero == _TRUE)
++	{
++		usb_bulkout_zero(pintfhdl, addr);
++	}
++
++	
++_func_exit_;
++	
++	return _SUCCESS;
++
++}
++
++
++void usb_write_port_cancel(_adapter *padapter)
++{
++
++	sint i,j;
++	struct dvobj_priv   *pdev = &padapter->dvobjpriv;
++	struct xmit_priv *pxmitpriv=&padapter->xmitpriv;
++	struct xmit_frame *pxmitframe;
++
++	_rtw_spinlock(&pxmitpriv->lock);
++	pxmitpriv->txirp_cnt--; //decrease 1 for Initialize ++
++	_rtw_spinunlock(&pxmitpriv->lock);
++	
++	if (pxmitpriv->txirp_cnt) 
++	{
++		// Canceling Pending Recv Irp
++		pxmitframe= (struct xmit_frame *)pxmitpriv->pxmit_frame_buf;
++		
++		for( i = 0; i < NR_XMITFRAME; i++ )
++		{
++			for(j=0;j<8;j++)
++			{
++				if (pxmitframe->bpending[j]==_TRUE)
++				{			
++					IoCancelIrp(pxmitframe->pxmit_irp[j]);		
++					RT_TRACE(_module_hci_ops_os_c_,_drv_err_,(" usb_write_port_cancel() :IoCancelIrp\n"));
++
++				}
++			}
++			
++			pxmitframe++;
++		}
++
++		_rtw_down_sema(&(pxmitpriv->tx_retevt));
++		
++	}
++
++}
++
++
++/*! \brief Wrap the pUrb to an IRP and send this IRP to Bus Driver. Then wait for this IRP completion.
++	The Caller shall be at Passive Level.
++*/
++NTSTATUS  sync_callusbd(struct dvobj_priv *pdvobjpriv, PURB purb)
++{
++
++	KEVENT					kevent;
++	PIRP						irp;
++	IO_STATUS_BLOCK		iostatusblock;
++	PIO_STACK_LOCATION		nextstack;
++	USBD_STATUS			usbdstatus;
++	LARGE_INTEGER			waittime;
++	NTSTATUS ntstatus = STATUS_SUCCESS;
++	_adapter *padapter = pdvobjpriv->padapter;
++	
++
++	_func_enter_;
++
++//	if(padapter->bDriverStopped) {
++//		goto exit;
++//	}
++	
++	KeInitializeEvent(&kevent, NotificationEvent, _FALSE);
++	irp = IoBuildDeviceIoControlRequest(
++			IOCTL_INTERNAL_USB_SUBMIT_URB,
++			pdvobjpriv->pphysdevobj,//CEdevice->pUsbDevObj, 
++			NULL, 
++			0, 
++			NULL, 
++			0, 
++			_TRUE, 
++			&kevent, 
++			&iostatusblock);
++
++	if(irp == NULL) {
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("SyncCallUSBD: memory alloc for irp failed\n"));
++		ntstatus=STATUS_INSUFFICIENT_RESOURCES;
++		goto exit;
++	}
++	
++	nextstack = IoGetNextIrpStackLocation(irp);
++	if(nextstack == NULL)	
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("IoGetNextIrpStackLocation fail\n"));
++
++	nextstack->Parameters.Others.Argument1 = purb;
++	
++	// Issue an IRP for Sync IO.
++	ntstatus = IoCallDriver(pdvobjpriv->pphysdevobj, irp);
++	usbdstatus = URB_STATUS(purb);
++
++	if(ntstatus == STATUS_PENDING)
++	{		
++		// Method 1
++		waittime.QuadPart = -10000 * 50000;
++		ntstatus = KeWaitForSingleObject(&kevent, Executive, KernelMode, _FALSE, &waittime); //8150 code
++		
++		// Method 2
++		//ntStatus = KeWaitForSingleObject(&Kevent, Executive, KernelMode, FALSE, NULL); //DDK sample
++		
++		usbdstatus = URB_STATUS(purb);
++
++		if(ntstatus == STATUS_TIMEOUT) 
++		{			
++			//usbdevice->nIoStuckCnt++;
++			RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("SyncCallUSBD: TIMEOUT....5000ms\n"));
++
++			// Method 2
++			IoCancelIrp(irp);
++			ntstatus = KeWaitForSingleObject(&kevent, Executive, KernelMode, _FALSE, NULL); //DDK sample
++			usbdstatus = URB_STATUS(purb);
++
++			usbdstatus = USBD_STATUS_SUCCESS;
++		}
++		
++	}
++	
++exit:	
++	
++	_func_exit_;
++	
++	return ntstatus;
++	
++}
++int usbctrl_vendorreq(struct intf_priv *pintfpriv, u8 request, u16 value, u16 index, void *pdata, u16 len, u8 requesttype)
++{
++	PURB			purb;
++	u8				ret;
++	unsigned long		transferflags;
++	NTSTATUS		ntstatus;
++
++	struct dvobj_priv  *pdvobjpriv = (struct dvobj_priv  *)pintfpriv->intf_dev;   
++	
++	_func_enter_;
++
++	ret=_TRUE;
++	purb = (PURB)ExAllocatePool(NonPagedPool, sizeof(struct _URB_CONTROL_VENDOR_OR_CLASS_REQUEST) );
++	if(purb == NULL) {
++		
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usbctrl_vendorreq(): Failed to allocate urb !!!\n"));
++		ret =_FALSE;
++		goto exit;
++	}
++
++	if (requesttype == 0x01) {
++		transferflags = USBD_TRANSFER_DIRECTION_IN;//read_in
++	} else {
++		transferflags= 0;//write_out
++	}
++
++	UsbBuildVendorRequest(
++			purb, 		//Pointer to an URB that is to be formatted as a vendor or class request. 
++			URB_FUNCTION_VENDOR_DEVICE,	//Indicates the URB is a vendor-defined request for a USB device. 
++			sizeof(struct _URB_CONTROL_VENDOR_OR_CLASS_REQUEST),  //Specifies the length, in bytes, of the URB. 
++			transferflags, 	//TransferFlags 
++			0,			//ReservedBits 
++			request, 	//Request 
++			value, 		//Value 
++			index,		//Index
++			pdata,		//TransferBuffer 
++			NULL,		//TransferBufferMDL 
++			len,			//TransferBufferLength 
++			NULL		//Link 
++	);
++
++	ntstatus = sync_callusbd(pdvobjpriv, purb);
++	if(!NT_SUCCESS(ntstatus))
++	{
++		ExFreePool(purb);
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,(" usbctrl_vendorreq() : SOMETHING WRONG\n") );
++		ret = _FALSE;
++		goto exit;
++	}
++
++	ExFreePool(purb);
++
++exit:	
++	_func_exit_;
++	
++	return ret;	
++
++}
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/ifcfg-wlan0 linux-raspberry-pi/drivers/net/wireless/rtl8192cu/ifcfg-wlan0
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/ifcfg-wlan0	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/ifcfg-wlan0	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,4 @@
++#DHCP client
++DEVICE=wlan0
++BOOTPROTO=dhcp
++ONBOOT=yes
+\ No newline at end of file
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/autoconf.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/autoconf.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/autoconf.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/autoconf.h	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,336 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++
++/*
++ * Public  General Config
++ */
++#define AUTOCONF_INCLUDED
++#define RTL871X_MODULE_NAME "92CU"
++#define DRV_NAME "rtl8192cu"
++
++#define CONFIG_USB_HCI	1
++
++#define CONFIG_RTL8192C	1
++
++#define PLATFORM_LINUX	1
++
++//#define CONFIG_IOCTL_CFG80211 1
++#ifdef CONFIG_IOCTL_CFG80211
++	//#define RTW_USE_CFG80211_STA_EVENT /* Indecate new sta asoc through cfg80211_new_sta */
++	#define CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER
++	//#define CONFIG_DEBUG_CFG80211 1
++	//#define CONFIG_DRV_ISSUE_PROV_REQ // IOT FOR S2
++	#define CONFIG_SET_SCAN_DENY_TIMER
++#endif
++
++/*
++ * Internal  General Config
++ */
++//#define CONFIG_PWRCTRL
++//#define CONFIG_H2CLBK
++
++#define CONFIG_EMBEDDED_FWIMG	1
++//#define CONFIG_FILE_FWIMG
++
++#ifdef CONFIG_WAKE_ON_WLAN
++#define CONFIG_WOWLAN 1
++#endif //CONFIG_WAKE_ON_WLAN
++
++#define CONFIG_R871X_TEST	1
++
++#define CONFIG_XMIT_ACK
++#ifdef CONFIG_XMIT_ACK
++	#define CONFIG_XMIT_ACK_POLLING
++	#define CONFIG_ACTIVE_KEEP_ALIVE_CHECK
++#endif
++
++#define CONFIG_80211N_HT	1
++
++#define CONFIG_RECV_REORDERING_CTRL	1
++
++//#define CONFIG_TCP_CSUM_OFFLOAD_RX	1
++
++//#define CONFIG_BEFORE_LINKED_DIG	
++//#define CONFIG_DRVEXT_MODULE	1
++
++#ifndef CONFIG_MP_INCLUDED
++	#define CONFIG_IPS	1
++	#ifdef CONFIG_IPS
++		//#define CONFIG_IPS_LEVEL_2	1 //enable this to set default IPS mode to IPS_LEVEL_2
++	#endif
++	
++	#define SUPPORT_HW_RFOFF_DETECTED	1
++
++	#define CONFIG_LPS	1
++	#define CONFIG_BT_COEXIST	1
++
++	//befor link
++	#define CONFIG_ANTENNA_DIVERSITY
++	
++	//after link
++	#ifdef CONFIG_ANTENNA_DIVERSITY
++		#define CONFIG_SW_ANTENNA_DIVERSITY	 
++		//#define CONFIG_HW_ANTENNA_DIVERSITY	
++	#endif
++
++	#define CONFIG_IOL
++#else 	//#ifndef CONFIG_MP_INCLUDED
++	#define CONFIG_MP_IWPRIV_SUPPORT	1
++#endif 	//#ifndef CONFIG_MP_INCLUDED
++
++#define CONFIG_AP_MODE	1
++#ifdef CONFIG_AP_MODE
++	#define CONFIG_NATIVEAP_MLME	1
++	#ifndef CONFIG_NATIVEAP_MLME
++		#define CONFIG_HOSTAPD_MLME	1
++	#endif			
++	#define CONFIG_FIND_BEST_CHANNEL	1
++	//#define CONFIG_NO_WIRELESS_HANDLERS	1
++#endif
++
++//	Added by Albert 20110314
++#define CONFIG_P2P	1
++#ifdef CONFIG_P2P
++	//Added by Albert 20110812
++	//The CONFIG_WFD is for supporting the Wi-Fi display
++	#define CONFIG_WFD
++	
++	#ifndef CONFIG_WIFI_TEST
++		#define CONFIG_P2P_REMOVE_GROUP_INFO
++	#endif
++	//#define CONFIG_DBG_P2P
++
++	//#define CONFIG_P2P_PS
++	//#define CONFIG_P2P_IPS
++
++	#define P2P_OP_CHECK_SOCIAL_CH
++		// Added comment by Borg 2013/06/21
++		// Issue:  Nexus 4 is hard to do miracast.
++		// Root Cause: After group formation, 
++		//			Nexus 4 is possible to be not at OP channel of Invitation Resp/Nego Confirm but at social channel. 
++		// Patch: While scan OP channel, 
++		//		 not only scan OP channel of Invitation Resp/Nego Confirm, 
++		//		 but also scan social channel(1, 6, 11)
++#endif
++
++//	Added by Kurt 20110511
++//#define CONFIG_TDLS	1
++#ifdef CONFIG_TDLS
++//	#ifndef CONFIG_WFD
++//		#define CONFIG_WFD	1
++//	#endif
++//	#define CONFIG_TDLS_AUTOSETUP			1
++//	#define CONFIG_TDLS_AUTOCHECKALIVE		1
++#endif
++
++#define CONFIG_SKB_COPY	1//for amsdu
++
++#define CONFIG_LED
++#ifdef CONFIG_LED
++	#define CONFIG_SW_LED
++	#ifdef CONFIG_SW_LED
++		//#define CONFIG_LED_HANDLED_BY_CMD_THREAD
++	#endif
++#endif // CONFIG_LED
++
++
++
++#define USB_INTERFERENCE_ISSUE // this should be checked in all usb interface
++#define CONFIG_GLOBAL_UI_PID
++
++#define CONFIG_LAYER2_ROAMING
++#define CONFIG_LAYER2_ROAMING_RESUME
++//#define CONFIG_ADAPTOR_INFO_CACHING_FILE // now just applied on 8192cu only, should make it general...
++//#define CONFIG_RESUME_IN_WORKQUEUE
++//#define CONFIG_SET_SCAN_DENY_TIMER
++#define CONFIG_LONG_DELAY_ISSUE
++#define CONFIG_NEW_SIGNAL_STAT_PROCESS
++//#define CONFIG_SIGNAL_DISPLAY_DBM //display RX signal with dbm
++#define RTW_NOTCH_FILTER 0 /* 0:Disable, 1:Enable */
++#define CONFIG_DEAUTH_BEFORE_CONNECT
++
++#ifdef CONFIG_IOL
++	#define CONFIG_IOL_LLT
++	#define CONFIG_IOL_MAC
++	#define CONFIG_IOL_BB_PHY_REG
++	#define CONFIG_IOL_BB_AGC_TAB
++	#define CONFIG_IOL_RF_RF90_PATH_A
++	#define CONFIG_IOL_RF_RF90_PATH_B
++#endif
++
++#define CONFIG_BR_EXT	1	// Enable NAT2.5 support for STA mode interface with a L2 Bridge
++#ifdef CONFIG_BR_EXT
++#define CONFIG_BR_EXT_BRNAME	"br0"
++#endif	// CONFIG_BR_EXT
++
++#define CONFIG_TX_MCAST2UNI	1	// Support IP multicast->unicast
++//#define CONFIG_DM_ADAPTIVITY
++//#define CONFIG_CHECK_AC_LIFETIME 1	// Check packet lifetime of 4 ACs.
++
++//#define CONFIG_CONCURRENT_MODE 1
++#ifdef CONFIG_CONCURRENT_MODE
++	#define CONFIG_TSF_RESET_OFFLOAD 1			// For 2 PORT TSF SYNC.
++	//#define CONFIG_HWPORT_SWAP				//Port0->Sec , Port1 -> Pri
++	//#define CONFIG_STA_MODE_SCAN_UNDER_AP_MODE
++	//#define CONFIG_MULTI_VIR_IFACES //besides primary&secondary interfaces, extend to support more interfaces
++#endif	// CONFIG_CONCURRENT_MODE
++
++#define CONFIG_80211D
++
++/*
++ * Interface  Related Config
++ */
++ 
++//#define CONFIG_USB_ONE_OUT_EP
++//#define CONFIG_USB_INTERRUPT_IN_PIPE	1
++
++#ifndef CONFIG_MINIMAL_MEMORY_USAGE
++	#define CONFIG_USB_TX_AGGREGATION	1
++	#define CONFIG_USB_RX_AGGREGATION	1
++#endif
++
++#define CONFIG_PREALLOC_RECV_SKB	1
++//#define CONFIG_REDUCE_USB_TX_INT	1	// Trade-off: Improve performance, but may cause TX URBs blocked by USB Host/Bus driver on few platforms.
++//#define CONFIG_EASY_REPLACEMENT	1
++
++/* 
++ * CONFIG_USE_USB_BUFFER_ALLOC_XX uses Linux USB Buffer alloc API and is for Linux platform only now!
++ */
++//#define CONFIG_USE_USB_BUFFER_ALLOC_TX 1	// Trade-off: For TX path, improve stability on some platforms, but may cause performance degrade on other platforms.
++//#define CONFIG_USE_USB_BUFFER_ALLOC_RX 1	// For RX path
++#ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX
++#undef CONFIG_PREALLOC_RECV_SKB
++#endif
++
++/* 
++ * USB VENDOR REQ BUFFER ALLOCATION METHOD
++ * if not set we'll use function local variable (stack memory)
++ */
++//#define CONFIG_USB_VENDOR_REQ_BUFFER_DYNAMIC_ALLOCATE
++#define CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC
++
++#define CONFIG_USB_VENDOR_REQ_MUTEX
++#define CONFIG_VENDOR_REQ_RETRY
++
++//#define CONFIG_USB_SUPPORT_ASYNC_VDN_REQ 1
++
++
++/*
++ * HAL  Related Config
++ */
++
++#define RTL8192C_RX_PACKET_NO_INCLUDE_CRC	1
++
++#define SUPPORTED_BLOCK_IO
++
++
++
++#define RTL8192CU_FW_DOWNLOAD_ENABLE	1
++
++#define CONFIG_ONLY_ONE_OUT_EP_TO_LOW	0
++
++#define CONFIG_OUT_EP_WIFI_MODE	0
++
++#define ENABLE_USB_DROP_INCORRECT_OUT	0
++
++#define RTL8192CU_ASIC_VERIFICATION	0	// For ASIC verification.
++
++#define RTL8192CU_ADHOC_WORKAROUND_SETTING	1
++
++#define DISABLE_BB_RF	0
++
++#define RTL8191C_FPGA_NETWORKTYPE_ADHOC 0
++
++#ifdef CONFIG_MP_INCLUDED
++	#define MP_DRIVER 1
++	#undef CONFIG_USB_TX_AGGREGATION
++	#undef CONFIG_USB_RX_AGGREGATION
++#else
++	#define MP_DRIVER 0
++#endif
++
++
++/*
++ * Platform  Related Config
++ */
++#ifdef CONFIG_PLATFORM_MN10300
++#define CONFIG_SPECIAL_SETTING_FOR_FUNAI_TV
++
++#if	defined (CONFIG_SW_ANTENNA_DIVERSITY)
++	#undef CONFIG_SW_ANTENNA_DIVERSITY
++	#define CONFIG_HW_ANTENNA_DIVERSITY
++#endif
++
++#endif
++
++#ifdef CONFIG_WISTRON_PLATFORM
++
++#endif
++
++#ifdef CONFIG_PLATFORM_TI_DM365
++#define CONFIG_USE_USB_BUFFER_ALLOC_RX 1
++#endif
++
++#define CONFIG_ATTEMPT_TO_FIX_AP_BEACON_ERROR
++
++/*
++ * Debug  Related Config
++ */
++//#define CONFIG_DEBUG_RTL871X
++
++#define DBG	0
++//#define CONFIG_DEBUG_RTL819X
++
++#define CONFIG_PROC_DEBUG	1
++
++//#define DBG_IO
++//#define DBG_DELAY_OS
++//#define DBG_MEM_ALLOC
++//#define DBG_IOCTL
++
++//#define DBG_TX
++//#define DBG_XMIT_BUF
++//#define DBG_TX_DROP_FRAME
++
++//#define DBG_RX_DROP_FRAME
++//#define DBG_RX_SEQ
++//#define DBG_RX_SIGNAL_DISPLAY_PROCESSING
++//#define DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED "jeff-ap"
++
++//#define DBG_EXPIRATION_CHK
++
++
++//#define DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE
++//#define DBG_ROAMING_TEST
++
++//#define DBG_HAL_INIT_PROFILING
++
++//#define DBG_MEMORY_LEAK	1
++
++#define DBG_CONFIG_ERROR_DETECT
++//#define DBG_CONFIG_ERROR_RESET
++
++//TX use 1 urb
++//#define CONFIG_SINGLE_XMIT_BUF
++//RX use 1 urb
++//#define CONFIG_SINGLE_RECV_BUF
++
++//turn off power tracking when traffic is busy
++//#define CONFIG_BUSY_TRAFFIC_SKIP_PWR_TRACK
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/basic_types.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/basic_types.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/basic_types.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/basic_types.h	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,321 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __BASIC_TYPES_H__
++#define __BASIC_TYPES_H__
++
++#include <drv_conf.h>
++
++
++#define SUCCESS	0
++#define FAIL	(-1)
++
++#ifndef TRUE
++	#define _TRUE	1
++#else
++	#define _TRUE	TRUE	
++#endif
++		
++#ifndef FALSE		
++	#define _FALSE	0
++#else
++	#define _FALSE	FALSE	
++#endif
++
++#ifdef PLATFORM_WINDOWS
++
++	typedef signed char s8;
++	typedef unsigned char u8;
++
++	typedef signed short s16;
++	typedef unsigned short u16;
++
++	typedef signed long s32;
++	typedef unsigned long u32;
++	
++	typedef unsigned int	uint;
++	typedef	signed int		sint;
++
++
++	typedef signed long long s64;
++	typedef unsigned long long u64;
++
++	#ifdef NDIS50_MINIPORT
++	
++		#define NDIS_MAJOR_VERSION       5
++		#define NDIS_MINOR_VERSION       0
++
++	#endif
++
++	#ifdef NDIS51_MINIPORT
++
++		#define NDIS_MAJOR_VERSION       5
++		#define NDIS_MINOR_VERSION       1
++
++	#endif
++
++	typedef NDIS_PROC proc_t;
++
++	typedef LONG atomic_t;
++
++#endif
++
++
++#ifdef PLATFORM_LINUX
++
++	#include <linux/types.h>
++	#define IN
++	#define OUT
++	#define VOID void
++	#define NDIS_OID uint
++	#define NDIS_STATUS uint
++
++	typedef	signed int sint;
++
++	#ifndef	PVOID
++	typedef void * PVOID;
++	//#define PVOID	(void *)
++	#endif
++
++        #define UCHAR u8
++	#define USHORT u16
++	#define UINT u32
++	#define ULONG u32	
++
++	typedef void (*proc_t)(void*);
++
++	typedef 	__kernel_size_t	SIZE_T;	
++	typedef	__kernel_ssize_t	SSIZE_T;
++	#define FIELD_OFFSET(s,field)	((SSIZE_T)&((s*)(0))->field)
++	
++#endif
++
++
++#ifdef PLATFORM_FREEBSD
++
++	typedef signed char s8;
++	typedef unsigned char u8;
++
++	typedef signed short s16;
++	typedef unsigned short u16;
++
++	typedef signed int s32;
++	typedef unsigned int u32;
++	
++	typedef unsigned int	uint;
++	typedef	signed int		sint;
++	typedef long atomic_t;
++
++	typedef signed long long s64;
++	typedef unsigned long long u64;
++	#define IN
++	#define OUT
++	#define VOID void
++	#define NDIS_OID uint
++	#define NDIS_STATUS uint
++	
++	#ifndef	PVOID
++	typedef void * PVOID;
++	//#define PVOID	(void *)
++	#endif
++	typedef u32 dma_addr_t;
++    #define UCHAR u8
++	#define USHORT u16
++	#define UINT u32
++	#define ULONG u32	
++
++	typedef void (*proc_t)(void*);
++  
++  typedef unsigned int __kernel_size_t;
++  typedef int __kernel_ssize_t;
++  
++	typedef 	__kernel_size_t	SIZE_T;	
++	typedef	__kernel_ssize_t	SSIZE_T;
++	#define FIELD_OFFSET(s,field)	((SSIZE_T)&((s*)(0))->field)
++	
++#endif
++
++#define MEM_ALIGNMENT_OFFSET	(sizeof (SIZE_T))
++#define MEM_ALIGNMENT_PADDING	(sizeof(SIZE_T) - 1)
++
++#define SIZE_PTR SIZE_T
++#define SSIZE_PTR SSIZE_T
++
++//port from fw by thomas
++// TODO: Belows are Sync from SD7-Driver. It is necessary to check correctness
++
++/*
++ *	Call endian free function when
++ *		1. Read/write packet content.
++ *		2. Before write integer to IO.
++ *		3. After read integer from IO.
++*/
++
++//
++// Byte Swapping routine.
++//
++#define EF1Byte	
++#define EF2Byte 	le16_to_cpu
++#define EF4Byte	le32_to_cpu
++
++//
++// Read LE format data from memory
++//
++#define ReadEF1Byte(_ptr)		EF1Byte(*((u8 *)(_ptr)))
++#define ReadEF2Byte(_ptr)		EF2Byte(*((u16 *)(_ptr)))
++#define ReadEF4Byte(_ptr)		EF4Byte(*((u32 *)(_ptr)))
++
++//
++// Write LE data to memory
++//
++#define WriteEF1Byte(_ptr, _val)	(*((u8 *)(_ptr)))=EF1Byte(_val)
++#define WriteEF2Byte(_ptr, _val)	(*((u16 *)(_ptr)))=EF2Byte(_val)
++#define WriteEF4Byte(_ptr, _val)	(*((u32 *)(_ptr)))=EF4Byte(_val)									
++
++//
++//	Example:
++//		BIT_LEN_MASK_32(0) => 0x00000000
++//		BIT_LEN_MASK_32(1) => 0x00000001
++//		BIT_LEN_MASK_32(2) => 0x00000003
++//		BIT_LEN_MASK_32(32) => 0xFFFFFFFF
++//
++#define BIT_LEN_MASK_32(__BitLen) \
++	(0xFFFFFFFF >> (32 - (__BitLen)))
++//
++//	Example:
++//		BIT_OFFSET_LEN_MASK_32(0, 2) => 0x00000003
++//		BIT_OFFSET_LEN_MASK_32(16, 2) => 0x00030000
++//
++#define BIT_OFFSET_LEN_MASK_32(__BitOffset, __BitLen) \
++	(BIT_LEN_MASK_32(__BitLen) << (__BitOffset)) 
++
++//
++//	Description:
++//		Return 4-byte value in host byte ordering from
++//		4-byte pointer in litten-endian system.
++//
++#define LE_P4BYTE_TO_HOST_4BYTE(__pStart) \
++	(EF4Byte(*((u32 *)(__pStart))))
++
++//
++//	Description:
++//		Translate subfield (continuous bits in little-endian) of 4-byte value in litten byte to
++//		4-byte value in host byte ordering.
++//
++#define LE_BITS_TO_4BYTE(__pStart, __BitOffset, __BitLen) \
++	( \
++		( LE_P4BYTE_TO_HOST_4BYTE(__pStart) >> (__BitOffset) ) \
++		& \
++		BIT_LEN_MASK_32(__BitLen) \
++	)
++
++//
++//	Description:
++//		Mask subfield (continuous bits in little-endian) of 4-byte value in litten byte oredering  
++//		and return the result in 4-byte value in host byte ordering.
++//
++#define LE_BITS_CLEARED_TO_4BYTE(__pStart, __BitOffset, __BitLen) \
++	( \
++		LE_P4BYTE_TO_HOST_4BYTE(__pStart) \
++		& \
++		( ~BIT_OFFSET_LEN_MASK_32(__BitOffset, __BitLen) ) \
++	)
++
++//
++//	Description:
++//		Set subfield of little-endian 4-byte value to specified value.	
++//
++#define SET_BITS_TO_LE_4BYTE(__pStart, __BitOffset, __BitLen, __Value) \
++	*((u32 *)(__pStart)) = \
++		EF4Byte( \
++			LE_BITS_CLEARED_TO_4BYTE(__pStart, __BitOffset, __BitLen) \
++			| \
++			( (((u32)__Value) & BIT_LEN_MASK_32(__BitLen)) << (__BitOffset) ) \
++		);
++
++		
++#define BIT_LEN_MASK_16(__BitLen) \
++		(0xFFFF >> (16 - (__BitLen)))
++		
++#define BIT_OFFSET_LEN_MASK_16(__BitOffset, __BitLen) \
++	(BIT_LEN_MASK_16(__BitLen) << (__BitOffset))
++	
++#define LE_P2BYTE_TO_HOST_2BYTE(__pStart) \
++	(EF2Byte(*((u16 *)(__pStart))))
++	
++#define LE_BITS_TO_2BYTE(__pStart, __BitOffset, __BitLen) \
++	( \
++		( LE_P2BYTE_TO_HOST_2BYTE(__pStart) >> (__BitOffset) ) \
++		& \
++		BIT_LEN_MASK_16(__BitLen) \
++	)
++	
++#define LE_BITS_CLEARED_TO_2BYTE(__pStart, __BitOffset, __BitLen) \
++	( \
++		LE_P2BYTE_TO_HOST_2BYTE(__pStart) \
++		& \
++		( ~BIT_OFFSET_LEN_MASK_16(__BitOffset, __BitLen) ) \
++	)
++
++#define SET_BITS_TO_LE_2BYTE(__pStart, __BitOffset, __BitLen, __Value) \
++	*((u16 *)(__pStart)) = \
++		EF2Byte( \
++			LE_BITS_CLEARED_TO_2BYTE(__pStart, __BitOffset, __BitLen) \
++			| \
++			( (((u16)__Value) & BIT_LEN_MASK_16(__BitLen)) << (__BitOffset) ) \
++		);
++			
++#define BIT_LEN_MASK_8(__BitLen) \
++		(0xFF >> (8 - (__BitLen)))
++
++#define BIT_OFFSET_LEN_MASK_8(__BitOffset, __BitLen) \
++	(BIT_LEN_MASK_8(__BitLen) << (__BitOffset))
++
++#define LE_P1BYTE_TO_HOST_1BYTE(__pStart) \
++	(EF1Byte(*((u8 *)(__pStart))))
++
++#define LE_BITS_TO_1BYTE(__pStart, __BitOffset, __BitLen) \
++	( \
++		( LE_P1BYTE_TO_HOST_1BYTE(__pStart) >> (__BitOffset) ) \
++		& \
++		BIT_LEN_MASK_8(__BitLen) \
++	)
++
++#define LE_BITS_CLEARED_TO_1BYTE(__pStart, __BitOffset, __BitLen) \
++	( \
++		LE_P1BYTE_TO_HOST_1BYTE(__pStart) \
++		& \
++		( ~BIT_OFFSET_LEN_MASK_8(__BitOffset, __BitLen) ) \
++	)
++
++#define SET_BITS_TO_LE_1BYTE(__pStart, __BitOffset, __BitLen, __Value) \
++	*((u8 *)(__pStart)) = \
++		EF1Byte( \
++			LE_BITS_CLEARED_TO_1BYTE(__pStart, __BitOffset, __BitLen) \
++			| \
++			( (((u8)__Value) & BIT_LEN_MASK_8(__BitLen)) << (__BitOffset) ) \
++		);
++
++// Get the N-bytes aligment offset from the current length
++#define N_BYTE_ALIGMENT(__Value, __Aligment) ((__Aligment == 1) ? (__Value) : (((__Value + __Aligment - 1) / __Aligment) * __Aligment))
++
++typedef unsigned char	BOOLEAN,*PBOOLEAN;
++
++#endif //__BASIC_TYPES_H__
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/byteorder/big_endian.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/byteorder/big_endian.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/byteorder/big_endian.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/byteorder/big_endian.h	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,87 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef _LINUX_BYTEORDER_BIG_ENDIAN_H
++#define _LINUX_BYTEORDER_BIG_ENDIAN_H
++
++#ifndef __BIG_ENDIAN
++#define __BIG_ENDIAN 4321
++#endif
++#ifndef __BIG_ENDIAN_BITFIELD
++#define __BIG_ENDIAN_BITFIELD
++#endif
++
++#include <byteorder/swab.h>
++
++#define __constant_htonl(x) ((__u32)(x))
++#define __constant_ntohl(x) ((__u32)(x))
++#define __constant_htons(x) ((__u16)(x))
++#define __constant_ntohs(x) ((__u16)(x))
++#define __constant_cpu_to_le64(x) ___constant_swab64((x))
++#define __constant_le64_to_cpu(x) ___constant_swab64((x))
++#define __constant_cpu_to_le32(x) ___constant_swab32((x))
++#define __constant_le32_to_cpu(x) ___constant_swab32((x))
++#define __constant_cpu_to_le16(x) ___constant_swab16((x))
++#define __constant_le16_to_cpu(x) ___constant_swab16((x))
++#define __constant_cpu_to_be64(x) ((__u64)(x))
++#define __constant_be64_to_cpu(x) ((__u64)(x))
++#define __constant_cpu_to_be32(x) ((__u32)(x))
++#define __constant_be32_to_cpu(x) ((__u32)(x))
++#define __constant_cpu_to_be16(x) ((__u16)(x))
++#define __constant_be16_to_cpu(x) ((__u16)(x))
++#define __cpu_to_le64(x) __swab64((x))
++#define __le64_to_cpu(x) __swab64((x))
++#define __cpu_to_le32(x) __swab32((x))
++#define __le32_to_cpu(x) __swab32((x))
++#define __cpu_to_le16(x) __swab16((x))
++#define __le16_to_cpu(x) __swab16((x))
++#define __cpu_to_be64(x) ((__u64)(x))
++#define __be64_to_cpu(x) ((__u64)(x))
++#define __cpu_to_be32(x) ((__u32)(x))
++#define __be32_to_cpu(x) ((__u32)(x))
++#define __cpu_to_be16(x) ((__u16)(x))
++#define __be16_to_cpu(x) ((__u16)(x))
++#define __cpu_to_le64p(x) __swab64p((x))
++#define __le64_to_cpup(x) __swab64p((x))
++#define __cpu_to_le32p(x) __swab32p((x))
++#define __le32_to_cpup(x) __swab32p((x))
++#define __cpu_to_le16p(x) __swab16p((x))
++#define __le16_to_cpup(x) __swab16p((x))
++#define __cpu_to_be64p(x) (*(__u64*)(x))
++#define __be64_to_cpup(x) (*(__u64*)(x))
++#define __cpu_to_be32p(x) (*(__u32*)(x))
++#define __be32_to_cpup(x) (*(__u32*)(x))
++#define __cpu_to_be16p(x) (*(__u16*)(x))
++#define __be16_to_cpup(x) (*(__u16*)(x))
++#define __cpu_to_le64s(x) __swab64s((x))
++#define __le64_to_cpus(x) __swab64s((x))
++#define __cpu_to_le32s(x) __swab32s((x))
++#define __le32_to_cpus(x) __swab32s((x))
++#define __cpu_to_le16s(x) __swab16s((x))
++#define __le16_to_cpus(x) __swab16s((x))
++#define __cpu_to_be64s(x) do {} while (0)
++#define __be64_to_cpus(x) do {} while (0)
++#define __cpu_to_be32s(x) do {} while (0)
++#define __be32_to_cpus(x) do {} while (0)
++#define __cpu_to_be16s(x) do {} while (0)
++#define __be16_to_cpus(x) do {} while (0)
++
++#include <byteorder/generic.h>
++
++#endif /* _LINUX_BYTEORDER_BIG_ENDIAN_H */
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/byteorder/generic.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/byteorder/generic.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/byteorder/generic.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/byteorder/generic.h	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,212 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef _LINUX_BYTEORDER_GENERIC_H
++#define _LINUX_BYTEORDER_GENERIC_H
++
++/*
++ * linux/byteorder_generic.h
++ * Generic Byte-reordering support
++ *
++ * Francois-Rene Rideau <fare@tunes.org> 19970707
++ *    gathered all the good ideas from all asm-foo/byteorder.h into one file,
++ *    cleaned them up.
++ *    I hope it is compliant with non-GCC compilers.
++ *    I decided to put __BYTEORDER_HAS_U64__ in byteorder.h,
++ *    because I wasn't sure it would be ok to put it in types.h
++ *    Upgraded it to 2.1.43
++ * Francois-Rene Rideau <fare@tunes.org> 19971012
++ *    Upgraded it to 2.1.57
++ *    to please Linus T., replaced huge #ifdef's between little/big endian
++ *    by nestedly #include'd files.
++ * Francois-Rene Rideau <fare@tunes.org> 19971205
++ *    Made it to 2.1.71; now a facelift:
++ *    Put files under include/linux/byteorder/
++ *    Split swab from generic support.
++ *
++ * TODO:
++ *   = Regular kernel maintainers could also replace all these manual
++ *    byteswap macros that remain, disseminated among drivers,
++ *    after some grep or the sources...
++ *   = Linus might want to rename all these macros and files to fit his taste,
++ *    to fit his personal naming scheme.
++ *   = it seems that a few drivers would also appreciate
++ *    nybble swapping support...
++ *   = every architecture could add their byteswap macro in asm/byteorder.h
++ *    see how some architectures already do (i386, alpha, ppc, etc)
++ *   = cpu_to_beXX and beXX_to_cpu might some day need to be well
++ *    distinguished throughout the kernel. This is not the case currently,
++ *    since little endian, big endian, and pdp endian machines needn't it.
++ *    But this might be the case for, say, a port of Linux to 20/21 bit
++ *    architectures (and F21 Linux addict around?).
++ */
++
++/*
++ * The following macros are to be defined by <asm/byteorder.h>:
++ *
++ * Conversion of long and short int between network and host format
++ *	ntohl(__u32 x)
++ *	ntohs(__u16 x)
++ *	htonl(__u32 x)
++ *	htons(__u16 x)
++ * It seems that some programs (which? where? or perhaps a standard? POSIX?)
++ * might like the above to be functions, not macros (why?).
++ * if that's true, then detect them, and take measures.
++ * Anyway, the measure is: define only ___ntohl as a macro instead,
++ * and in a separate file, have
++ * unsigned long inline ntohl(x){return ___ntohl(x);}
++ *
++ * The same for constant arguments
++ *	__constant_ntohl(__u32 x)
++ *	__constant_ntohs(__u16 x)
++ *	__constant_htonl(__u32 x)
++ *	__constant_htons(__u16 x)
++ *
++ * Conversion of XX-bit integers (16- 32- or 64-)
++ * between native CPU format and little/big endian format
++ * 64-bit stuff only defined for proper architectures
++ *	cpu_to_[bl]eXX(__uXX x)
++ *	[bl]eXX_to_cpu(__uXX x)
++ *
++ * The same, but takes a pointer to the value to convert
++ *	cpu_to_[bl]eXXp(__uXX x)
++ *	[bl]eXX_to_cpup(__uXX x)
++ *
++ * The same, but change in situ
++ *	cpu_to_[bl]eXXs(__uXX x)
++ *	[bl]eXX_to_cpus(__uXX x)
++ *
++ * See asm-foo/byteorder.h for examples of how to provide
++ * architecture-optimized versions
++ *
++ */
++
++
++#if defined(PLATFORM_LINUX) || defined(PLATFORM_WINDOWS) || defined(PLATFORM_MPIXEL) || defined(PLATFORM_FREEBSD)
++/*
++ * inside the kernel, we can use nicknames;
++ * outside of it, we must avoid POSIX namespace pollution...
++ */
++#define cpu_to_le64 __cpu_to_le64
++#define le64_to_cpu __le64_to_cpu
++#define cpu_to_le32 __cpu_to_le32
++#define le32_to_cpu __le32_to_cpu
++#define cpu_to_le16 __cpu_to_le16
++#define le16_to_cpu __le16_to_cpu
++#define cpu_to_be64 __cpu_to_be64
++#define be64_to_cpu __be64_to_cpu
++#define cpu_to_be32 __cpu_to_be32
++#define be32_to_cpu __be32_to_cpu
++#define cpu_to_be16 __cpu_to_be16
++#define be16_to_cpu __be16_to_cpu
++#define cpu_to_le64p __cpu_to_le64p
++#define le64_to_cpup __le64_to_cpup
++#define cpu_to_le32p __cpu_to_le32p
++#define le32_to_cpup __le32_to_cpup
++#define cpu_to_le16p __cpu_to_le16p
++#define le16_to_cpup __le16_to_cpup
++#define cpu_to_be64p __cpu_to_be64p
++#define be64_to_cpup __be64_to_cpup
++#define cpu_to_be32p __cpu_to_be32p
++#define be32_to_cpup __be32_to_cpup
++#define cpu_to_be16p __cpu_to_be16p
++#define be16_to_cpup __be16_to_cpup
++#define cpu_to_le64s __cpu_to_le64s
++#define le64_to_cpus __le64_to_cpus
++#define cpu_to_le32s __cpu_to_le32s
++#define le32_to_cpus __le32_to_cpus
++#define cpu_to_le16s __cpu_to_le16s
++#define le16_to_cpus __le16_to_cpus
++#define cpu_to_be64s __cpu_to_be64s
++#define be64_to_cpus __be64_to_cpus
++#define cpu_to_be32s __cpu_to_be32s
++#define be32_to_cpus __be32_to_cpus
++#define cpu_to_be16s __cpu_to_be16s
++#define be16_to_cpus __be16_to_cpus
++#endif
++
++
++/*
++ * Handle ntohl and suches. These have various compatibility
++ * issues - like we want to give the prototype even though we
++ * also have a macro for them in case some strange program
++ * wants to take the address of the thing or something..
++ *
++ * Note that these used to return a "long" in libc5, even though
++ * long is often 64-bit these days.. Thus the casts.
++ *
++ * They have to be macros in order to do the constant folding
++ * correctly - if the argument passed into a inline function
++ * it is no longer constant according to gcc..
++ */
++
++#undef ntohl
++#undef ntohs
++#undef htonl
++#undef htons
++
++/*
++ * Do the prototypes. Somebody might want to take the
++ * address or some such sick thing..
++ */
++#if defined(PLATFORM_LINUX) || (defined (__GLIBC__) && __GLIBC__ >= 2)
++extern __u32			ntohl(__u32);
++extern __u32			htonl(__u32);
++#else //defined(PLATFORM_LINUX) || (defined (__GLIBC__) && __GLIBC__ >= 2)
++#ifndef PLATFORM_FREEBSD
++extern unsigned long int	ntohl(unsigned long int);
++extern unsigned long int	htonl(unsigned long int);
++#endif
++#endif
++#ifndef PLATFORM_FREEBSD
++extern unsigned short int	ntohs(unsigned short int);
++extern unsigned short int	htons(unsigned short int);
++#endif
++
++#if defined(__GNUC__) && (__GNUC__ >= 2) && defined(__OPTIMIZE__) ||  defined(PLATFORM_MPIXEL)
++
++#define ___htonl(x) __cpu_to_be32(x)
++#define ___htons(x) __cpu_to_be16(x)
++#define ___ntohl(x) __be32_to_cpu(x)
++#define ___ntohs(x) __be16_to_cpu(x)
++
++#if defined(PLATFORM_LINUX) || (defined (__GLIBC__) && __GLIBC__ >= 2)
++#define htonl(x) ___htonl(x)
++#define ntohl(x) ___ntohl(x)
++#else
++#define htonl(x) ((unsigned long)___htonl(x))
++#define ntohl(x) ((unsigned long)___ntohl(x))
++#endif
++#define htons(x) ___htons(x)
++#define ntohs(x) ___ntohs(x)
++
++#endif /* OPTIMIZE */
++
++
++#if defined (PLATFORM_WINDOWS)
++
++#define htonl(x) __cpu_to_be32(x)
++#define ntohl(x) __be32_to_cpu(x)
++#define htons(x) __cpu_to_be16(x)
++#define ntohs(x) __be16_to_cpu(x)
++
++
++#endif
++
++#endif /* _LINUX_BYTEORDER_GENERIC_H */
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/byteorder/little_endian.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/byteorder/little_endian.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/byteorder/little_endian.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/byteorder/little_endian.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,89 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef _LINUX_BYTEORDER_LITTLE_ENDIAN_H
++#define _LINUX_BYTEORDER_LITTLE_ENDIAN_H
++
++#ifndef __LITTLE_ENDIAN
++#define __LITTLE_ENDIAN 1234
++#endif
++#ifndef __LITTLE_ENDIAN_BITFIELD
++#define __LITTLE_ENDIAN_BITFIELD
++#endif
++
++#include <byteorder/swab.h>
++
++#ifndef __constant_htonl
++#define __constant_htonl(x) ___constant_swab32((x))
++#define __constant_ntohl(x) ___constant_swab32((x))
++#define __constant_htons(x) ___constant_swab16((x))
++#define __constant_ntohs(x) ___constant_swab16((x))
++#define __constant_cpu_to_le64(x) ((__u64)(x))
++#define __constant_le64_to_cpu(x) ((__u64)(x))
++#define __constant_cpu_to_le32(x) ((__u32)(x))
++#define __constant_le32_to_cpu(x) ((__u32)(x))
++#define __constant_cpu_to_le16(x) ((__u16)(x))
++#define __constant_le16_to_cpu(x) ((__u16)(x))
++#define __constant_cpu_to_be64(x) ___constant_swab64((x))
++#define __constant_be64_to_cpu(x) ___constant_swab64((x))
++#define __constant_cpu_to_be32(x) ___constant_swab32((x))
++#define __constant_be32_to_cpu(x) ___constant_swab32((x))
++#define __constant_cpu_to_be16(x) ___constant_swab16((x))
++#define __constant_be16_to_cpu(x) ___constant_swab16((x))
++#define __cpu_to_le64(x) ((__u64)(x))
++#define __le64_to_cpu(x) ((__u64)(x))
++#define __cpu_to_le32(x) ((__u32)(x))
++#define __le32_to_cpu(x) ((__u32)(x))
++#define __cpu_to_le16(x) ((__u16)(x))
++#define __le16_to_cpu(x) ((__u16)(x))
++#define __cpu_to_be64(x) __swab64((x))
++#define __be64_to_cpu(x) __swab64((x))
++#define __cpu_to_be32(x) __swab32((x))
++#define __be32_to_cpu(x) __swab32((x))
++#define __cpu_to_be16(x) __swab16((x))
++#define __be16_to_cpu(x) __swab16((x))
++#define __cpu_to_le64p(x) (*(__u64*)(x))
++#define __le64_to_cpup(x) (*(__u64*)(x))
++#define __cpu_to_le32p(x) (*(__u32*)(x))
++#define __le32_to_cpup(x) (*(__u32*)(x))
++#define __cpu_to_le16p(x) (*(__u16*)(x))
++#define __le16_to_cpup(x) (*(__u16*)(x))
++#define __cpu_to_be64p(x) __swab64p((x))
++#define __be64_to_cpup(x) __swab64p((x))
++#define __cpu_to_be32p(x) __swab32p((x))
++#define __be32_to_cpup(x) __swab32p((x))
++#define __cpu_to_be16p(x) __swab16p((x))
++#define __be16_to_cpup(x) __swab16p((x))
++#define __cpu_to_le64s(x) do {} while (0)
++#define __le64_to_cpus(x) do {} while (0)
++#define __cpu_to_le32s(x) do {} while (0)
++#define __le32_to_cpus(x) do {} while (0)
++#define __cpu_to_le16s(x) do {} while (0)
++#define __le16_to_cpus(x) do {} while (0)
++#define __cpu_to_be64s(x) __swab64s((x))
++#define __be64_to_cpus(x) __swab64s((x))
++#define __cpu_to_be32s(x) __swab32s((x))
++#define __be32_to_cpus(x) __swab32s((x))
++#define __cpu_to_be16s(x) __swab16s((x))
++#define __be16_to_cpus(x) __swab16s((x))
++#endif	// __constant_htonl
++
++#include <byteorder/generic.h>
++
++#endif /* _LINUX_BYTEORDER_LITTLE_ENDIAN_H */
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/byteorder/swabb.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/byteorder/swabb.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/byteorder/swabb.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/byteorder/swabb.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,156 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef _LINUX_BYTEORDER_SWABB_H
++#define _LINUX_BYTEORDER_SWABB_H
++
++/*
++ * linux/byteorder/swabb.h
++ * SWAp Bytes Bizarrely
++ *	swaHHXX[ps]?(foo)
++ *
++ * Support for obNUXIous pdp-endian and other bizarre architectures.
++ * Will Linux ever run on such ancient beasts? if not, this file
++ * will be but a programming pearl. Still, it's a reminder that we
++ * shouldn't be making too many assumptions when trying to be portable.
++ *
++ */
++
++/*
++ * Meaning of the names I chose (vaxlinux people feel free to correct them):
++ * swahw32	swap 16-bit half-words in a 32-bit word
++ * swahb32	swap 8-bit halves of each 16-bit half-word in a 32-bit word
++ *
++ * No 64-bit support yet. I don't know NUXI conventions for long longs.
++ * I guarantee it will be a mess when it's there, though :->
++ * It will be even worse if there are conflicting 64-bit conventions.
++ * Hopefully, no one ever used 64-bit objects on NUXI machines.
++ *
++ */
++
++#define ___swahw32(x) \
++({ \
++	__u32 __x = (x); \
++	((__u32)( \
++		(((__u32)(__x) & (__u32)0x0000ffffUL) << 16) | \
++		(((__u32)(__x) & (__u32)0xffff0000UL) >> 16) )); \
++})
++#define ___swahb32(x) \
++({ \
++	__u32 __x = (x); \
++	((__u32)( \
++		(((__u32)(__x) & (__u32)0x00ff00ffUL) << 8) | \
++		(((__u32)(__x) & (__u32)0xff00ff00UL) >> 8) )); \
++})
++
++#define ___constant_swahw32(x) \
++	((__u32)( \
++		(((__u32)(x) & (__u32)0x0000ffffUL) << 16) | \
++		(((__u32)(x) & (__u32)0xffff0000UL) >> 16) ))
++#define ___constant_swahb32(x) \
++	((__u32)( \
++		(((__u32)(x) & (__u32)0x00ff00ffUL) << 8) | \
++		(((__u32)(x) & (__u32)0xff00ff00UL) >> 8) ))
++
++/*
++ * provide defaults when no architecture-specific optimization is detected
++ */
++#ifndef __arch__swahw32
++#  define __arch__swahw32(x) ___swahw32(x)
++#endif
++#ifndef __arch__swahb32
++#  define __arch__swahb32(x) ___swahb32(x)
++#endif
++
++#ifndef __arch__swahw32p
++#  define __arch__swahw32p(x) __swahw32(*(x))
++#endif
++#ifndef __arch__swahb32p
++#  define __arch__swahb32p(x) __swahb32(*(x))
++#endif
++
++#ifndef __arch__swahw32s
++#  define __arch__swahw32s(x) do { *(x) = __swahw32p((x)); } while (0)
++#endif
++#ifndef __arch__swahb32s
++#  define __arch__swahb32s(x) do { *(x) = __swahb32p((x)); } while (0)
++#endif
++
++
++/*
++ * Allow constant folding
++ */
++#if defined(__GNUC__) && (__GNUC__ >= 2) && defined(__OPTIMIZE__)
++#  define __swahw32(x) \
++(__builtin_constant_p((__u32)(x)) ? \
++ ___swahw32((x)) : \
++ __fswahw32((x)))
++#  define __swahb32(x) \
++(__builtin_constant_p((__u32)(x)) ? \
++ ___swahb32((x)) : \
++ __fswahb32((x)))
++#else
++#  define __swahw32(x) __fswahw32(x)
++#  define __swahb32(x) __fswahb32(x)
++#endif /* OPTIMIZE */
++
++
++__inline static__ __const__ __u32 __fswahw32(__u32 x)
++{
++	return __arch__swahw32(x);
++}
++__inline static__ __u32 __swahw32p(__u32 *x)
++{
++	return __arch__swahw32p(x);
++}
++__inline static__ void __swahw32s(__u32 *addr)
++{
++	__arch__swahw32s(addr);
++}
++
++
++__inline static__ __const__ __u32 __fswahb32(__u32 x)
++{
++	return __arch__swahb32(x);
++}
++__inline static__ __u32 __swahb32p(__u32 *x)
++{
++	return __arch__swahb32p(x);
++}
++__inline static__ void __swahb32s(__u32 *addr)
++{
++	__arch__swahb32s(addr);
++}
++
++#ifdef __BYTEORDER_HAS_U64__
++/*
++ * Not supported yet
++ */
++#endif /* __BYTEORDER_HAS_U64__ */
++
++#if defined(PLATFORM_LINUX)
++#define swahw32 __swahw32
++#define swahb32 __swahb32
++#define swahw32p __swahw32p
++#define swahb32p __swahb32p
++#define swahw32s __swahw32s
++#define swahb32s __swahb32s
++#endif
++
++#endif /* _LINUX_BYTEORDER_SWABB_H */
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/byteorder/swab.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/byteorder/swab.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/byteorder/swab.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/byteorder/swab.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,140 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef _LINUX_BYTEORDER_SWAB_H
++#define _LINUX_BYTEORDER_SWAB_H
++
++#if !defined(CONFIG_PLATFORM_MSTAR)
++#ifndef __u16
++typedef unsigned short __u16;
++#endif
++
++#ifndef __u32
++typedef unsigned int	__u32;
++#endif
++
++#ifndef __u8
++typedef unsigned char __u8;
++#endif
++
++#ifndef __u64
++typedef unsigned long long	__u64;	
++#endif
++
++
++__inline static __u16  ___swab16(__u16 x)
++{
++	__u16 __x = x; 
++	return 
++	((__u16)( 
++		(((__u16)(__x) & (__u16)0x00ffU) << 8) |
++		(((__u16)(__x) & (__u16)0xff00U) >> 8) ));
++
++}
++
++__inline static __u32  ___swab32(__u32 x)
++{
++	__u32 __x = (x);
++	return ((__u32)(
++		(((__u32)(__x) & (__u32)0x000000ffUL) << 24) |
++		(((__u32)(__x) & (__u32)0x0000ff00UL) <<  8) |
++		(((__u32)(__x) & (__u32)0x00ff0000UL) >>  8) |
++		(((__u32)(__x) & (__u32)0xff000000UL) >> 24) ));
++}
++
++__inline static __u64  ___swab64(__u64 x)
++{
++	__u64 __x = (x);
++	
++	return 
++	((__u64)( \
++		(__u64)(((__u64)(__x) & (__u64)0x00000000000000ffULL) << 56) | \
++		(__u64)(((__u64)(__x) & (__u64)0x000000000000ff00ULL) << 40) | \
++		(__u64)(((__u64)(__x) & (__u64)0x0000000000ff0000ULL) << 24) | \
++		(__u64)(((__u64)(__x) & (__u64)0x00000000ff000000ULL) <<  8) | \
++	        (__u64)(((__u64)(__x) & (__u64)0x000000ff00000000ULL) >>  8) | \
++		(__u64)(((__u64)(__x) & (__u64)0x0000ff0000000000ULL) >> 24) | \
++		(__u64)(((__u64)(__x) & (__u64)0x00ff000000000000ULL) >> 40) | \
++		(__u64)(((__u64)(__x) & (__u64)0xff00000000000000ULL) >> 56) )); \
++}
++#endif // CONFIG_PLATFORM_MSTAR
++
++#ifndef __arch__swab16
++__inline static __u16 __arch__swab16(__u16 x)
++{
++	return ___swab16(x);
++}
++
++#endif
++
++#ifndef __arch__swab32
++__inline static __u32 __arch__swab32(__u32 x)
++{
++	__u32 __tmp = (x) ; 
++	return ___swab32(__tmp);
++}
++#endif
++
++#ifndef __arch__swab64
++
++__inline static __u64 __arch__swab64(__u64 x)
++{
++	__u64 __tmp = (x) ; 
++	return ___swab64(__tmp);
++}
++
++
++#endif
++
++#ifndef __swab16
++#define __swab16(x) __fswab16(x)
++#define __swab32(x) __fswab32(x)
++#define __swab64(x) __fswab64(x)
++#endif	// __swab16
++
++#ifdef PLATFORM_FREEBSD
++__inline static __u16 __fswab16(__u16 x)
++#else
++__inline static const __u16 __fswab16(__u16 x)
++#endif //PLATFORM_FREEBSD
++{
++	return __arch__swab16(x);
++}
++#ifdef PLATFORM_FREEBSD
++__inline static __u32 __fswab32(__u32 x)
++#else
++__inline static const __u32 __fswab32(__u32 x)
++#endif //PLATFORM_FREEBSD
++{
++	return __arch__swab32(x);
++}
++
++#if defined(PLATFORM_LINUX) || defined(PLATFORM_WINDOWS)
++#define swab16 __swab16
++#define swab32 __swab32
++#define swab64 __swab64
++#define swab16p __swab16p
++#define swab32p __swab32p
++#define swab64p __swab64p
++#define swab16s __swab16s
++#define swab32s __swab32s
++#define swab64s __swab64s
++#endif
++
++#endif /* _LINUX_BYTEORDER_SWAB_H */
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/circ_buf.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/circ_buf.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/circ_buf.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/circ_buf.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,27 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __CIRC_BUF_H_
++#define __CIRC_BUF_H_ 1
++
++#define CIRC_CNT(head,tail,size) (((head) - (tail)) & ((size)-1))
++
++#define CIRC_SPACE(head,tail,size) CIRC_CNT((tail),((head)+1),(size))
++
++#endif //_CIRC_BUF_H_
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/cmd_osdep.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/cmd_osdep.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/cmd_osdep.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/cmd_osdep.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,36 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __CMD_OSDEP_H_
++#define __CMD_OSDEP_H_
++
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++
++extern sint _rtw_init_cmd_priv (struct	cmd_priv *pcmdpriv);
++extern sint _rtw_init_evt_priv(struct evt_priv *pevtpriv);
++extern void _rtw_free_evt_priv (struct	evt_priv *pevtpriv);
++extern void _rtw_free_cmd_priv (struct	cmd_priv *pcmdpriv);
++extern sint _rtw_enqueue_cmd(_queue *queue, struct cmd_obj *obj);
++extern struct	cmd_obj	*_rtw_dequeue_cmd(_queue *queue);
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/drv_conf.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/drv_conf.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/drv_conf.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/drv_conf.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,78 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __DRV_CONF_H__
++#define __DRV_CONF_H__
++#include "autoconf.h"
++
++#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS)
++
++#error "Shall be Linux or Windows, but not both!\n"
++
++#endif
++
++//Older Android kernel doesn't has CONFIG_ANDROID defined,
++//add this to force CONFIG_ANDROID defined
++#ifdef CONFIG_PLATFORM_ANDROID
++#define CONFIG_ANDROID
++#endif
++
++#ifdef CONFIG_ANDROID
++//Some Android build will restart the UI while non-printable ascii is passed
++//between java and c/c++ layer (JNI). We force CONFIG_VALIDATE_SSID
++//for Android here. If you are sure there is no risk on your system about this,
++//mask this macro define to support non-printable ascii ssid.
++//#define CONFIG_VALIDATE_SSID
++
++//Android expect dbm as the rx signal strength unit
++#define CONFIG_SIGNAL_DISPLAY_DBM
++#endif
++
++#if defined(CONFIG_HAS_EARLYSUSPEND) && defined (CONFIG_RESUME_IN_WORKQUEUE)
++	#warning "You have CONFIG_HAS_EARLYSUSPEND enabled in your system, we disable CONFIG_RESUME_IN_WORKQUEUE automatically"
++	#undef CONFIG_RESUME_IN_WORKQUEUE
++#endif
++
++#if defined(CONFIG_ANDROID_POWER) && defined (CONFIG_RESUME_IN_WORKQUEUE)
++	#warning "You have CONFIG_ANDROID_POWER enabled in your system, we disable CONFIG_RESUME_IN_WORKQUEUE automatically"
++	#undef CONFIG_RESUME_IN_WORKQUEUE
++#endif
++
++#ifdef CONFIG_RESUME_IN_WORKQUEUE //this can be removed, because there is no case for this...
++	#if !defined( CONFIG_WAKELOCK) && !defined(CONFIG_ANDROID_POWER)
++	#error "enable CONFIG_RESUME_IN_WORKQUEUE without CONFIG_WAKELOCK or CONFIG_ANDROID_POWER will suffer from the danger of wifi's unfunctionality..."
++	#error "If you still want to enable CONFIG_RESUME_IN_WORKQUEUE in this case, mask this preprossor checking and GOOD LUCK..."
++	#endif
++#endif
++
++//About USB VENDOR REQ
++#if defined(CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC) && !defined(CONFIG_USB_VENDOR_REQ_MUTEX) 
++	#warning "define CONFIG_USB_VENDOR_REQ_MUTEX for CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC automatically"
++	#define CONFIG_USB_VENDOR_REQ_MUTEX
++#endif
++#if defined(CONFIG_VENDOR_REQ_RETRY) &&  !defined(CONFIG_USB_VENDOR_REQ_MUTEX)
++	#warning "define CONFIG_USB_VENDOR_REQ_MUTEX for CONFIG_VENDOR_REQ_RETRY automatically"
++	#define CONFIG_USB_VENDOR_REQ_MUTEX
++#endif
++
++
++//#include <rtl871x_byteorder.h>
++
++#endif // __DRV_CONF_H__
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/drv_types_ce.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/drv_types_ce.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/drv_types_ce.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/drv_types_ce.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,92 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __DRV_TYPES_CE_H__
++#define __DRV_TYPES_CE_H__
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++
++#include <Sdcardddk.h>
++
++#define MAX_ACTIVE_REG_PATH 256
++
++#define MAX_MCAST_LIST_NUM					32
++
++
++
++//for ioctl
++#define MAKE_DRIVER_VERSION(_MainVer,_MinorVer)	((((u32)(_MainVer))<<16)+_MinorVer)
++
++#define NIC_HEADER_SIZE				14			//!< can be moved to typedef.h
++#define NIC_MAX_PACKET_SIZE			1514		//!< can be moved to typedef.h
++#define NIC_MAX_SEND_PACKETS			10		// max number of send packets the MiniportSendPackets function can accept, can be moved to typedef.h
++#define NIC_VENDOR_DRIVER_VERSION       MAKE_DRIVER_VERSION(0,001)	//!< can be moved to typedef.h
++#define NIC_MAX_PACKET_SIZE			1514		//!< can be moved to typedef.h
++
++typedef struct _MP_REG_ENTRY
++{
++
++	NDIS_STRING		RegName;	// variable name text
++	BOOLEAN			bRequired;	// 1 -> required, 0 -> optional
++
++	u8			Type;		// NdisParameterInteger/NdisParameterHexInteger/NdisParameterStringle/NdisParameterMultiString
++	uint			FieldOffset;	// offset to MP_ADAPTER field
++	uint			FieldSize;	// size (in bytes) of the field
++	
++#ifdef UNDER_AMD64
++	u64			Default;
++#else
++	u32			Default;		// default value to use
++#endif
++
++	u32			Min;			// minimum value allowed
++	u32			Max;		// maximum value allowed
++} MP_REG_ENTRY, *PMP_REG_ENTRY;
++
++#ifdef CONFIG_USB_HCI
++typedef struct _USB_EXTENSION {
++    LPCUSB_FUNCS    _lpUsbFuncs;
++	USB_HANDLE	    _hDevice;
++    PVOID 		    pAdapter;
++
++#if 0
++	USB_ENDPOINT_DESCRIPTOR		_endpACLIn;
++    USB_ENDPOINT_DESCRIPTOR		_endpACLOutHigh;
++	USB_ENDPOINT_DESCRIPTOR		_endpACLOutNormal;
++
++	USB_PIPE        pPipeIn;
++    USB_PIPE        pPipeOutNormal;
++    USB_PIPE        pPipeOutHigh;
++#endif
++
++} USB_EXTENSION, *PUSB_EXTENSION;
++#endif
++
++
++typedef struct _OCTET_STRING{
++	u8      *Octet;
++	u16      Length;
++} OCTET_STRING, *POCTET_STRING;
++
++
++
++
++
++#endif
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/drv_types.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/drv_types.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/drv_types.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/drv_types.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,662 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++/*-------------------------------------------------------------------------------
++
++	For type defines and data structure defines
++
++--------------------------------------------------------------------------------*/
++
++
++#ifndef __DRV_TYPES_H__
++#define __DRV_TYPES_H__
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <wlan_bssdef.h>
++
++
++#ifdef PLATFORM_OS_XP
++#include <drv_types_xp.h>
++#endif
++
++#ifdef PLATFORM_OS_CE
++#include <drv_types_ce.h>
++#endif
++
++#ifdef PLATFORM_LINUX
++#include <drv_types_linux.h>
++#endif
++
++enum _NIC_VERSION {
++
++	RTL8711_NIC,
++	RTL8712_NIC,
++	RTL8713_NIC,
++	RTL8716_NIC
++
++};
++
++enum{
++	UP_LINK,
++	DOWN_LINK,
++};
++typedef struct _ADAPTER _adapter, ADAPTER,*PADAPTER;
++
++#ifdef CONFIG_80211N_HT
++#include <rtw_ht.h>
++#endif
++
++#include <rtw_cmd.h>
++#include <wlan_bssdef.h>
++#include <rtw_security.h>
++#include <rtw_xmit.h>
++#include <rtw_recv.h>
++#include <hal_intf.h>
++#include <hal_com.h>
++#include <rtw_qos.h>
++#include <rtw_pwrctrl.h>
++#include <rtw_io.h>
++#include <rtw_eeprom.h>
++#include <sta_info.h>
++#include <rtw_mlme.h>
++#include <rtw_debug.h>
++#include <rtw_rf.h>
++#include <rtw_event.h>
++#include <rtw_led.h>
++#include <rtw_mlme_ext.h>
++#include <rtw_p2p.h>
++#include <rtw_tdls.h>
++#include <rtw_ap.h>
++
++#ifdef CONFIG_DRVEXT_MODULE
++#include <drvext_api.h>
++#endif
++
++#ifdef CONFIG_MP_INCLUDED
++#include <rtw_mp.h>
++#endif
++
++#ifdef CONFIG_BR_EXT
++#include <rtw_br_ext.h>
++#endif	// CONFIG_BR_EXT
++
++#ifdef CONFIG_IOCTL_CFG80211
++	#include "ioctl_cfg80211.h"	
++#endif //CONFIG_IOCTL_CFG80211
++
++#define SPEC_DEV_ID_NONE BIT(0)
++#define SPEC_DEV_ID_DISABLE_HT BIT(1)
++#define SPEC_DEV_ID_ENABLE_PS BIT(2)
++#define SPEC_DEV_ID_RF_CONFIG_1T1R BIT(3)
++#define SPEC_DEV_ID_RF_CONFIG_2T2R BIT(4)
++#define SPEC_DEV_ID_ASSIGN_IFNAME BIT(5)
++
++struct specific_device_id{
++
++	u32		flags;
++
++	u16		idVendor;
++	u16		idProduct;
++
++};
++
++struct registry_priv
++{
++	u8	chip_version;
++	u8	rfintfs;
++	u8	lbkmode;
++	u8	hci;
++	NDIS_802_11_SSID	ssid;
++	u8	network_mode;	//infra, ad-hoc, auto
++	u8	channel;//ad-hoc support requirement
++	u8	wireless_mode;//A, B, G, auto
++	u8 	scan_mode;//active, passive
++	u8	radio_enable;
++	u8	preamble;//long, short, auto
++	u8	vrtl_carrier_sense;//Enable, Disable, Auto
++	u8	vcs_type;//RTS/CTS, CTS-to-self
++	u16	rts_thresh;
++	u16  frag_thresh;
++	u8	adhoc_tx_pwr;
++	u8	soft_ap;
++	u8	power_mgnt;
++	u8	ips_mode;
++	u8	smart_ps;
++	u8	long_retry_lmt;
++	u8	short_retry_lmt;
++	u16	busy_thresh;
++	u8	ack_policy;
++	u8	mp_mode;
++	u8	software_encrypt;
++	u8	software_decrypt;
++
++	u8	acm_method;
++	  //UAPSD
++	u8	wmm_enable;
++	u8	uapsd_enable;
++	u8	uapsd_max_sp;
++	u8	uapsd_acbk_en;
++	u8	uapsd_acbe_en;
++	u8	uapsd_acvi_en;
++	u8	uapsd_acvo_en;
++
++	WLAN_BSSID_EX    dev_network;
++
++#ifdef CONFIG_80211N_HT
++	u8	ht_enable;
++	u8	cbw40_enable;
++	u8	ampdu_enable;//for tx
++	u8 	rx_stbc;
++	u8	ampdu_amsdu;//A-MPDU Supports A-MSDU is permitted
++#endif
++	u8	lowrate_two_xmit;
++
++	u8	rf_config ;
++	u8	low_power ;
++
++	u8	wifi_spec;// !turbo_mode
++
++	u8	channel_plan;
++#ifdef CONFIG_BT_COEXIST
++	u8	bt_iso;
++	u8	bt_sco;
++	u8	bt_ampdu;
++#endif
++	BOOLEAN	bAcceptAddbaReq;
++
++	u8	antdiv_cfg;
++
++	u8	usbss_enable;//0:disable,1:enable
++	u8	hwpdn_mode;//0:disable,1:enable,2:decide by EFUSE config
++	u8	hwpwrp_detect;//0:disable,1:enable
++
++	u8	hw_wps_pbc;//0:disable,1:enable
++
++#ifdef CONFIG_ADAPTOR_INFO_CACHING_FILE
++	char	adaptor_info_caching_file_path[PATH_LENGTH_MAX];
++#endif
++
++#ifdef CONFIG_LAYER2_ROAMING
++	u8	max_roaming_times; // the max number driver will try to roaming
++#endif
++
++#ifdef CONFIG_IOL
++	bool force_iol; //enable iol without other concern
++#endif
++	u8  special_rf_path; //0: 2T2R ,1: only turn on path A 1T1R, 2: only turn on path B 1T1R
++	u8	mac_phy_mode; //0:by efuse, 1:smsp, 2:dmdp, 3:dmsp.
++
++#ifdef CONFIG_80211D
++	u8 enable80211d;
++#endif
++
++	u8 ifname[16];
++	u8 if2name[16];
++
++	u8 notch_filter;
++
++#ifdef CONFIG_MULTI_VIR_IFACES
++	u8 ext_iface_num;//primary/secondary iface is excluded
++#endif
++};
++
++
++//For registry parameters
++#define RGTRY_OFT(field) ((ULONG)FIELD_OFFSET(struct registry_priv,field))
++#define RGTRY_SZ(field)   sizeof(((struct registry_priv*) 0)->field)
++#define BSSID_OFT(field) ((ULONG)FIELD_OFFSET(WLAN_BSSID_EX,field))
++#define BSSID_SZ(field)   sizeof(((PWLAN_BSSID_EX) 0)->field)
++
++#define MAX_CONTINUAL_URB_ERR 4
++
++#ifdef CONFIG_SDIO_HCI
++#include <drv_types_sdio.h>
++#define INTF_DATA SDIO_DATA
++#endif
++
++#define GET_PRIMARY_ADAPTER(padapter) (((_adapter *)padapter)->dvobj->if1)
++
++#define GET_IFACE_NUMS(padapter) (((_adapter *)padapter)->dvobj->iface_nums)
++#define GET_ADAPTER(padapter, iface_id) (((_adapter *)padapter)->dvobj->padapters[iface_id])
++
++enum _IFACE_ID {
++	IFACE_ID0, //maping to PRIMARY_ADAPTER
++	IFACE_ID1, //maping to SECONDARY_ADAPTER
++	IFACE_ID2, 
++	IFACE_ID3, 
++	IFACE_ID_MAX,
++};
++
++struct dvobj_priv
++{
++	_adapter *if1; //PRIMARY_ADAPTER
++	_adapter *if2; //SECONDARY_ADAPTER
++
++	s32 processing_dev_remove;
++
++	//for local/global synchronization
++	_mutex hw_init_mutex;
++	_mutex h2c_fwcmd_mutex;
++	_mutex setch_mutex;
++	_mutex setbw_mutex;
++
++	unsigned char	oper_channel; //saved channel info when call set_channel_bw
++	unsigned char	oper_bwmode;
++	unsigned char	oper_ch_offset;//PRIME_CHNL_OFFSET
++	u32 on_oper_ch_time;
++
++	//extend to support mulitu interface
++	//padapters[IFACE_ID0] == if1
++	//padapters[IFACE_ID1] == if2	
++	_adapter *padapters[IFACE_ID_MAX];
++	u8 iface_nums; // total number of ifaces used runtime
++
++	//For 92D, DMDP have 2 interface.
++	u8	InterfaceNumber;
++	u8	NumInterfaces;
++	u8	DualMacMode;
++	u8	irq_alloc;
++
++/*-------- below is for SDIO INTERFACE --------*/
++
++#ifdef INTF_DATA
++	INTF_DATA intf_data;
++#endif
++
++/*-------- below is for USB INTERFACE --------*/
++
++#ifdef CONFIG_USB_HCI
++
++	u8	nr_endpoint;
++	u8	ishighspeed;
++	u8	RtNumInPipes;
++	u8	RtNumOutPipes;
++	int	ep_num[5]; //endpoint number
++
++	int	RegUsbSS;
++
++	_sema	usb_suspend_sema;
++
++#ifdef CONFIG_USB_VENDOR_REQ_MUTEX
++	_mutex  usb_vendor_req_mutex;
++#endif
++
++#ifdef CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC
++	u8 * usb_alloc_vendor_req_buf;
++	u8 * usb_vendor_req_buf;
++#endif
++
++#ifdef PLATFORM_WINDOWS
++	//related device objects
++	PDEVICE_OBJECT	pphysdevobj;//pPhysDevObj;
++	PDEVICE_OBJECT	pfuncdevobj;//pFuncDevObj;
++	PDEVICE_OBJECT	pnextdevobj;//pNextDevObj;
++
++	u8	nextdevstacksz;//unsigned char NextDeviceStackSize;	//= (CHAR)CEdevice->pUsbDevObj->StackSize + 1;
++
++	//urb for control diescriptor request
++
++#ifdef PLATFORM_OS_XP
++	struct _URB_CONTROL_DESCRIPTOR_REQUEST descriptor_urb;
++	PUSB_CONFIGURATION_DESCRIPTOR	pconfig_descriptor;//UsbConfigurationDescriptor;
++#endif
++
++#ifdef PLATFORM_OS_CE
++	WCHAR			active_path[MAX_ACTIVE_REG_PATH];	// adapter regpath
++	USB_EXTENSION	usb_extension;
++
++	_nic_hdl		pipehdls_r8192c[0x10];
++#endif
++
++	u32	config_descriptor_len;//ULONG UsbConfigurationDescriptorLength;
++#endif//PLATFORM_WINDOWS
++
++#ifdef PLATFORM_LINUX
++	struct usb_interface *pusbintf;
++	struct usb_device *pusbdev;
++#endif//PLATFORM_LINUX
++
++#ifdef PLATFORM_FREEBSD
++	struct usb_interface *pusbintf;
++	struct usb_device *pusbdev;
++#endif//PLATFORM_FREEBSD
++	ATOMIC_T continual_urb_error;
++#endif//CONFIG_USB_HCI
++
++/*-------- below is for PCIE INTERFACE --------*/
++
++#ifdef CONFIG_PCI_HCI
++
++#ifdef PLATFORM_LINUX
++	struct pci_dev *ppcidev;
++
++	//PCI MEM map
++	unsigned long	pci_mem_end;	/* shared mem end	*/
++	unsigned long	pci_mem_start;	/* shared mem start	*/
++
++	//PCI IO map
++	unsigned long	pci_base_addr;	/* device I/O address	*/
++
++	//PciBridge
++	struct pci_priv	pcipriv;
++
++	u16	irqline;
++	u8	irq_enabled;
++	RT_ISR_CONTENT	isr_content;
++	_lock	irq_th_lock;
++
++	//ASPM
++	u8	const_pci_aspm;
++	u8	const_amdpci_aspm;
++	u8	const_hwsw_rfoff_d3;
++	u8	const_support_pciaspm;
++	// pci-e bridge */
++	u8 	const_hostpci_aspm_setting;
++	// pci-e device */
++	u8 	const_devicepci_aspm_setting;
++	u8 	b_support_aspm; // If it supports ASPM, Offset[560h] = 0x40, otherwise Offset[560h] = 0x00.
++	u8	b_support_backdoor;
++	u8 bdma64;
++#endif//PLATFORM_LINUX
++
++#endif//CONFIG_PCI_HCI
++};
++
++#ifdef PLATFORM_LINUX
++static struct device *dvobj_to_dev(struct dvobj_priv *dvobj)
++{
++	/* todo: get interface type from dvobj and the return the dev accordingly */
++#ifdef RTW_DVOBJ_CHIP_HW_TYPE
++#endif
++
++#ifdef CONFIG_USB_HCI
++	return &dvobj->pusbintf->dev;
++#endif
++#ifdef CONFIG_SDIO_HCI
++	return &dvobj->intf_data.func->dev;
++#endif
++#ifdef CONFIG_PCI_HCI
++	return &dvobj->ppcidev->dev;
++#endif
++}
++#endif
++
++
++enum _IFACE_TYPE {
++	IFACE_PORT0, //mapping to port0 for C/D series chips
++	IFACE_PORT1, //mapping to port1 for C/D series chip
++	MAX_IFACE_PORT,
++};
++
++enum _ADAPTER_TYPE {
++	PRIMARY_ADAPTER,
++	SECONDARY_ADAPTER,
++	MAX_ADAPTER = 0xFF,	
++};
++
++typedef enum _DRIVER_STATE{
++	DRIVER_NORMAL = 0,
++	DRIVER_DISAPPEAR = 1,
++	DRIVER_REPLACE_DONGLE = 2,
++}DRIVER_STATE;
++
++#ifdef CONFIG_INTEL_PROXIM	
++struct proxim {
++	bool proxim_support;
++	bool proxim_on;
++
++	void *proximity_priv;
++	int (*proxim_rx)(_adapter *padapter,
++		union recv_frame *precv_frame);
++	u8	(*proxim_get_var)(_adapter* padapter, u8 type);
++};
++#endif	//CONFIG_INTEL_PROXIM
++
++#ifdef RTL8723A_SDIO_LOOPBACK
++typedef struct loopbackdata
++{
++	_sema	sema;
++	_thread_hdl_ lbkthread;
++	u8 bstop;
++	u32 cnt;
++	u16 size;
++	u16 txsize;
++	u8 txbuf[0x8000];
++	u16 rxsize;
++	u8 rxbuf[0x8000];
++	u8 msg[100];
++
++}LOOPBACKDATA, *PLOOPBACKDATA;
++#endif
++
++struct _ADAPTER{
++	int	DriverState;// for disable driver using module, use dongle to replace module.
++	int	pid[3];//process id from UI, 0:wps, 1:hostapd, 2:dhcpcd
++	int	bDongle;//build-in module or external dongle
++	u16 	chip_type;
++	u16	HardwareType;
++	u16	interface_type;//USB,SDIO,PCI
++
++	struct dvobj_priv *dvobj;
++	struct	mlme_priv mlmepriv;
++	struct	mlme_ext_priv mlmeextpriv;
++	struct	cmd_priv	cmdpriv;
++	struct	evt_priv	evtpriv;
++	//struct	io_queue	*pio_queue;
++	struct 	io_priv	iopriv;
++	struct	xmit_priv	xmitpriv;
++	struct	recv_priv	recvpriv;
++	struct	sta_priv	stapriv;
++	struct	security_priv	securitypriv;
++	_lock   security_key_mutex; // add for CONFIG_IEEE80211W, none 11w also can use
++	struct	registry_priv	registrypriv;	
++	struct	pwrctrl_priv	pwrctrlpriv;
++	struct 	eeprom_priv eeprompriv;
++	struct	led_priv	ledpriv;
++
++#ifdef CONFIG_MP_INCLUDED
++       struct	mp_priv	mppriv;
++#endif
++
++#ifdef CONFIG_DRVEXT_MODULE
++	struct	drvext_priv	drvextpriv;
++#endif
++
++#ifdef CONFIG_AP_MODE
++	struct	hostapd_priv	*phostapdpriv;
++#endif
++
++#ifdef CONFIG_IOCTL_CFG80211
++#ifdef CONFIG_P2P
++	struct cfg80211_wifidirect_info	cfg80211_wdinfo;
++#endif //CONFIG_P2P
++#endif //CONFIG_IOCTL_CFG80211
++	u32	setband;
++#ifdef CONFIG_P2P
++	struct wifidirect_info	wdinfo;
++#endif //CONFIG_P2P
++
++#ifdef CONFIG_TDLS
++	struct tdls_info	tdlsinfo;
++#endif //CONFIG_TDLS
++
++#ifdef CONFIG_WFD
++	struct wifi_display_info wfd_info;
++#endif //CONFIG_WFD
++
++	PVOID			HalData;
++	u32 hal_data_sz;
++	struct hal_ops	HalFunc;
++
++#ifdef CONFIG_BT_COEXIST
++	//struct	btcoexist_priv	bt_coexist;
++#endif
++	s32	bDriverStopped;
++	s32	bSurpriseRemoved;
++	s32  bCardDisableWOHSM;
++
++	u32	IsrContent;
++	u32	ImrContent;
++
++	u8	EepromAddressSize;
++	u8	hw_init_completed;
++	u8	bDriverIsGoingToUnload;
++	u8	init_adpt_in_progress;
++	u8	bHaltInProgress;
++
++	_thread_hdl_ cmdThread;
++	_thread_hdl_ evtThread;
++	_thread_hdl_ xmitThread;
++	_thread_hdl_ recvThread;
++
++#ifndef PLATFORM_LINUX
++	NDIS_STATUS (*dvobj_init)(struct dvobj_priv	*dvobj);
++	void (*dvobj_deinit)(struct dvobj_priv *dvobj);
++#endif
++
++	void (*intf_start)(_adapter * adapter);
++	void (*intf_stop)(_adapter * adapter);
++
++#ifdef PLATFORM_WINDOWS
++	_nic_hdl		hndis_adapter;//hNdisAdapter(NDISMiniportAdapterHandle);
++	_nic_hdl		hndis_config;//hNdisConfiguration;
++	NDIS_STRING fw_img;
++
++	u32	NdisPacketFilter;
++	u8	MCList[MAX_MCAST_LIST_NUM][6];
++	u32	MCAddrCount;
++#endif //end of PLATFORM_WINDOWS
++
++
++#ifdef PLATFORM_LINUX
++	_nic_hdl pnetdev;
++
++	// used by rtw_rereg_nd_name related function
++	struct rereg_nd_name_data {
++		_nic_hdl old_pnetdev;
++		char old_ifname[IFNAMSIZ];
++		u8 old_ips_mode;
++		u8 old_bRegUseLed;
++	} rereg_nd_name_priv;
++
++	int bup;
++	struct net_device_stats stats;
++	struct iw_statistics iwstats;
++	struct proc_dir_entry *dir_dev;// for proc directory
++
++#ifdef CONFIG_IOCTL_CFG80211
++	struct wireless_dev *rtw_wdev;
++#endif //CONFIG_IOCTL_CFG80211
++
++#endif //end of PLATFORM_LINUX
++
++#ifdef PLATFORM_FREEBSD
++	_nic_hdl pifp;
++	int bup;
++	_lock glock;
++#endif //PLATFORM_FREEBSD
++	int net_closed;
++
++	u8 bFWReady;
++	u8 bReadPortCancel;
++	u8 bWritePortCancel;
++	u8 bRxRSSIDisplay;
++	//	Added by Albert 2012/07/26
++	//	The driver will write the initial gain everytime when running in the DM_Write_DIG function.
++	u8 bForceWriteInitGain;
++	//	Added by Albert 2012/10/26
++	//	The driver will show up the desired channel number when this flag is 1.
++	u8 bNotifyChannelChange;
++#ifdef CONFIG_P2P
++	//	Added by Albert 2012/12/06
++	//	The driver will show the current P2P status when the upper application reads it.
++	u8 bShowGetP2PState;
++#endif
++#ifdef CONFIG_AUTOSUSPEND
++	u8	bDisableAutosuspend;
++#endif
++
++	//pbuddy_adapter is used only in  two inteface case, (iface_nums=2 in struct dvobj_priv)
++	//PRIMARY_ADAPTER's buddy is SECONDARY_ADAPTER
++	//SECONDARY_ADAPTER's buddy is PRIMARY_ADAPTER
++	//for iface_id > SECONDARY_ADAPTER(IFACE_ID1), refer to padapters[iface_id]  in struct dvobj_priv
++	//and their pbuddy_adapter is PRIMARY_ADAPTER.
++	//for PRIMARY_ADAPTER(IFACE_ID0) can directly refer to if1 in struct dvobj_priv
++	_adapter *pbuddy_adapter;
++	
++#if defined(CONFIG_CONCURRENT_MODE) || defined(CONFIG_DUALMAC_CONCURRENT)
++	u8 isprimary; //is primary adapter or not
++	//notes: 
++	// if isprimary is true, the adapter_type value is 0, iface_id is IFACE_ID0 for PRIMARY_ADAPTER
++	// if isprimary is false, the adapter_type value is 1, iface_id is IFACE_ID1 for SECONDARY_ADAPTER
++	// refer to iface_id if iface_nums>2 and isprimary is false and the adapter_type value is 0xff.
++	u8 adapter_type;//used only in  two inteface case(PRIMARY_ADAPTER and SECONDARY_ADAPTER) . 
++	u8 iface_type; //interface port type, it depends on HW port 
++#endif
++
++	//extend to support multi interface
++       //IFACE_ID0 is equals to PRIMARY_ADAPTER
++       //IFACE_ID1 is equals to SECONDARY_ADAPTER	
++	u8 iface_id;
++
++#ifdef CONFIG_DUALMAC_CONCURRENT
++	u8 DualMacConcurrent; // 1: DMSP 0:DMDP
++#endif
++
++#ifdef CONFIG_BR_EXT
++	_lock					br_ext_lock;
++	//unsigned int			macclone_completed;
++	struct nat25_network_db_entry	*nethash[NAT25_HASH_SIZE];
++	int				pppoe_connection_in_progress;
++	unsigned char			pppoe_addr[MACADDRLEN];
++	unsigned char			scdb_mac[MACADDRLEN];
++	unsigned char			scdb_ip[4];
++	struct nat25_network_db_entry	*scdb_entry;
++	unsigned char			br_mac[MACADDRLEN];
++	unsigned char			br_ip[4];
++
++	struct br_ext_info		ethBrExtInfo;
++#endif	// CONFIG_BR_EXT
++
++#ifdef CONFIG_INTEL_PROXIM	
++	/* intel Proximity, should be alloc mem
++	 * in intel Proximity module and can only 
++	 * be used in intel Proximity mode */
++	struct proxim proximity;
++#endif	//CONFIG_INTEL_PROXIM
++
++#ifdef RTL8723A_SDIO_LOOPBACK
++	PLOOPBACKDATA ploopback;
++#endif
++
++};
++
++#define adapter_to_dvobj(adapter) (adapter->dvobj)
++
++int rtw_handle_dualmac(_adapter *adapter, bool init);
++
++__inline static u8 *myid(struct eeprom_priv *peepriv)
++{
++	return (peepriv->mac_addr);
++}
++
++
++#endif //__DRV_TYPES_H__
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/drv_types_linux.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/drv_types_linux.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/drv_types_linux.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/drv_types_linux.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,25 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __DRV_TYPES_LINUX_H__
++#define __DRV_TYPES_LINUX_H__
++
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/drv_types_sdio.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/drv_types_sdio.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/drv_types_sdio.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/drv_types_sdio.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,70 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __DRV_TYPES_SDIO_H__
++#define __DRV_TYPES_SDIO_H__
++
++#include <drv_conf.h>
++#include <basic_types.h>
++
++// SDIO Header Files
++#ifdef PLATFORM_LINUX
++#include <linux/mmc/sdio_func.h>
++#endif
++#ifdef PLATFORM_OS_XP
++#include <wdm.h>
++#include <ntddsd.h>
++#endif
++#ifdef PLATFORM_OS_CE
++#include <sdcardddk.h>
++#endif
++
++
++typedef struct sdio_data
++{
++	u8  func_number;
++ 
++	u8  tx_block_mode;
++	u8  rx_block_mode;
++	u32 block_transfer_len;
++
++#ifdef PLATFORM_LINUX
++	struct sdio_func	 *func;
++#endif
++
++#ifdef PLATFORM_OS_XP
++	PDEVICE_OBJECT				pphysdevobj;
++	PDEVICE_OBJECT				pfuncdevobj;
++	PDEVICE_OBJECT				pnextdevobj;
++	SDBUS_INTERFACE_STANDARD	sdbusinft;
++	u8							nextdevstacksz;
++#endif
++
++#ifdef PLATFORM_OS_CE
++	SD_DEVICE_HANDLE			hDevice;
++	SD_CARD_RCA					sd_rca;
++	SD_CARD_INTERFACE			card_intf;
++	BOOLEAN						enableIsarWithStatus;
++	WCHAR						active_path[MAX_ACTIVE_REG_PATH];
++	SD_HOST_BLOCK_CAPABILITY	sd_host_blk_cap;
++#endif
++} SDIO_DATA, *PSDIO_DATA;
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/drv_types_xp.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/drv_types_xp.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/drv_types_xp.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/drv_types_xp.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,95 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __DRV_TYPES_XP_H__
++#define __DRV_TYPES_XP_H__
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++
++
++
++#define MAX_MCAST_LIST_NUM					32
++
++
++
++//for ioctl
++#define MAKE_DRIVER_VERSION(_MainVer,_MinorVer)	((((u32)(_MainVer))<<16)+_MinorVer)
++
++#define NIC_HEADER_SIZE				14			//!< can be moved to typedef.h
++#define NIC_MAX_PACKET_SIZE			1514		//!< can be moved to typedef.h
++#define NIC_MAX_SEND_PACKETS			10		// max number of send packets the MiniportSendPackets function can accept, can be moved to typedef.h
++#define NIC_VENDOR_DRIVER_VERSION       MAKE_DRIVER_VERSION(0,001)	//!< can be moved to typedef.h
++#define NIC_MAX_PACKET_SIZE			1514		//!< can be moved to typedef.h
++
++
++#undef ON_VISTA
++//added by Jackson
++#ifndef ON_VISTA
++//
++// Bus driver versions
++//
++
++#define SDBUS_DRIVER_VERSION_1          0x100
++#define SDBUS_DRIVER_VERSION_2          0x200
++
++#define    SDP_FUNCTION_TYPE	4
++#define    SDP_BUS_DRIVER_VERSION 5
++#define    SDP_BUS_WIDTH 6
++#define    SDP_BUS_CLOCK 7
++#define    SDP_BUS_INTERFACE_CONTROL 8
++#define    SDP_HOST_BLOCK_LENGTH 9
++#define    SDP_FUNCTION_BLOCK_LENGTH 10
++#define    SDP_FN0_BLOCK_LENGTH 11
++#define    SDP_FUNCTION_INT_ENABLE 12
++#endif
++
++
++typedef struct _MP_REG_ENTRY
++{
++
++	NDIS_STRING		RegName;	// variable name text
++	BOOLEAN			bRequired;	// 1 -> required, 0 -> optional
++
++	u8			Type;		// NdisParameterInteger/NdisParameterHexInteger/NdisParameterStringle/NdisParameterMultiString
++	uint			FieldOffset;	// offset to MP_ADAPTER field
++	uint			FieldSize;	// size (in bytes) of the field
++	
++#ifdef UNDER_AMD64
++	u64			Default;
++#else
++	u32			Default;		// default value to use
++#endif
++
++	u32			Min;			// minimum value allowed
++	u32			Max;		// maximum value allowed
++} MP_REG_ENTRY, *PMP_REG_ENTRY;
++
++
++typedef struct _OCTET_STRING{
++	u8      *Octet;
++	u16      Length;
++} OCTET_STRING, *POCTET_STRING;
++
++
++
++
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/ethernet.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/ethernet.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/ethernet.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/ethernet.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,41 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++/*! \file */ 
++#ifndef __INC_ETHERNET_H
++#define __INC_ETHERNET_H
++
++#define ETHERNET_ADDRESS_LENGTH				6		//!< Ethernet Address Length
++#define ETHERNET_HEADER_SIZE				14		//!< Ethernet Header Length
++#define LLC_HEADER_SIZE						6		//!< LLC Header Length
++#define TYPE_LENGTH_FIELD_SIZE				2		//!< Type/Length Size
++#define MINIMUM_ETHERNET_PACKET_SIZE		60		//!< Minimum Ethernet Packet Size
++#define MAXIMUM_ETHERNET_PACKET_SIZE		1514	//!< Maximum Ethernet Packet Size
++
++#define RT_ETH_IS_MULTICAST(_pAddr)	((((UCHAR *)(_pAddr))[0]&0x01)!=0)		//!< Is Multicast Address?
++#define RT_ETH_IS_BROADCAST(_pAddr)	(										\
++											((UCHAR *)(_pAddr))[0]==0xff	&& 		\
++											((UCHAR *)(_pAddr))[1]==0xff	&&		\
++											((UCHAR *)(_pAddr))[2]==0xff	&&		\
++											((UCHAR *)(_pAddr))[3]==0xff	&&		\
++											((UCHAR *)(_pAddr))[4]==0xff	&&		\
++											((UCHAR *)(_pAddr))[5]==0xff		)	//!< Is Broadcast Address?
++
++
++#endif // #ifndef __INC_ETHERNET_H
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/h2clbk.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/h2clbk.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/h2clbk.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/h2clbk.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,35 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++
++
++#define _H2CLBK_H_
++
++
++#include <rtl8711_spec.h>
++#include <TypeDef.h>
++
++
++void _lbk_cmd(PADAPTER Adapter);
++
++void _lbk_rsp(PADAPTER Adapter);
++
++void _lbk_evt(IN PADAPTER Adapter);
++
++void h2c_event_callback(unsigned char *dev, unsigned char *pbuf);
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/Hal8192CEHWImg.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/Hal8192CEHWImg.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/Hal8192CEHWImg.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/Hal8192CEHWImg.h	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,85 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __INC_HAL8192CE_FW_IMG_H
++#define __INC_HAL8192CE_FW_IMG_H
++
++#include <basic_types.h>
++
++/*Created on  2011/ 6/15,  5:45*/
++
++#ifdef CONFIG_BT_COEXISTENCE
++#define TSMCImgArrayLength 15706 //v84 TSMC COMMON 2012-04-13
++#else //#ifdef CONFIG_P2P
++#define TSMCImgArrayLength 16126 //v88 TSMC P2PPS with CCX report C2H 2012-12-05
++#endif
++extern u8 Rtl8192CEFwTSMCImgArray[TSMCImgArrayLength];
++
++#ifdef CONFIG_BT_COEXISTENCE
++#define UMCACutImgArrayLength 16248 //v79 UMC A Cut COMMON 2011-10-06
++#else //#ifdef CONFIG_P2P
++#define UMCACutImgArrayLength 16126 //v88 UMC A Cut P2PPS with CCX report C2H 2012-12-05
++#endif
++extern u8 Rtl8192CEFwUMCACutImgArray[UMCACutImgArrayLength];
++
++#ifdef CONFIG_BT_COEXISTENCE
++#define UMCBCutImgArrayLength 15686 //v84 UMC B Cut COMMON 2012-04-13
++#else //#ifdef CONFIG_P2P
++#define UMCBCutImgArrayLength 16096 //v88 UMC B Cut P2PPS with CCX report C2H 2012-12-05
++#endif
++extern u8 Rtl8192CEFwUMCBCutImgArray[UMCBCutImgArrayLength];
++
++//8192C_Formal_92CE_PHYforMP_110804 2011-11-23
++//8188C_Formal_88CE_PHYforMP_111117 2011-11-23
++
++#define PHY_REG_2TArrayLength 374
++extern u32 Rtl8192CEPHY_REG_2TArray[PHY_REG_2TArrayLength];
++#define PHY_REG_1TArrayLength 374
++extern u32 Rtl8192CEPHY_REG_1TArray[PHY_REG_1TArrayLength];
++#define PHY_ChangeTo_1T1RArrayLength 1
++extern u32 Rtl8192CEPHY_ChangeTo_1T1RArray[PHY_ChangeTo_1T1RArrayLength];
++#define PHY_ChangeTo_1T2RArrayLength 1
++extern u32 Rtl8192CEPHY_ChangeTo_1T2RArray[PHY_ChangeTo_1T2RArrayLength];
++#define PHY_ChangeTo_2T2RArrayLength 1
++extern u32 Rtl8192CEPHY_ChangeTo_2T2RArray[PHY_ChangeTo_2T2RArrayLength];
++#define PHY_REG_Array_PGLength 336
++extern u32 Rtl8192CEPHY_REG_Array_PG[PHY_REG_Array_PGLength];
++#define PHY_REG_Array_MPLength 4
++extern u32 Rtl8192CEPHY_REG_Array_MP[PHY_REG_Array_MPLength];
++#define RadioA_2TArrayLength 282
++extern u32 Rtl8192CERadioA_2TArray[RadioA_2TArrayLength];
++#define RadioB_2TArrayLength 78
++extern u32 Rtl8192CERadioB_2TArray[RadioB_2TArrayLength];
++#define RadioA_1TArrayLength 282
++extern u32 Rtl8192CERadioA_1TArray[RadioA_1TArrayLength];
++#define RadioB_1TArrayLength 1
++extern u32 Rtl8192CERadioB_1TArray[RadioB_1TArrayLength];
++#define RadioB_GM_ArrayLength 1
++extern u32 Rtl8192CERadioB_GM_Array[RadioB_GM_ArrayLength];
++// MAC reg V14 - 2011-11-23
++#define MAC_2T_ArrayLength 174
++extern u32 Rtl8192CEMAC_2T_Array[MAC_2T_ArrayLength];
++#define MACPHY_Array_PGLength 1
++extern u32 Rtl8192CEMACPHY_Array_PG[MACPHY_Array_PGLength];
++#define AGCTAB_2TArrayLength 320
++extern u32 Rtl8192CEAGCTAB_2TArray[AGCTAB_2TArrayLength];
++#define AGCTAB_1TArrayLength 320
++extern u32 Rtl8192CEAGCTAB_1TArray[AGCTAB_1TArrayLength];
++
++#endif //__INC_HAL8192CE_FW_IMG_H
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/Hal8192CPhyCfg.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/Hal8192CPhyCfg.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/Hal8192CPhyCfg.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/Hal8192CPhyCfg.h	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,428 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++/*****************************************************************************
++ * Module:	__INC_HAL8192CPHYCFG_H
++ *
++ *
++ * Note:	
++ *			
++ *
++ * Export:	Constants, macro, functions(API), global variables(None).
++ *
++ * Abbrev:	
++ *
++ * History:
++ *		Data		Who		Remark 
++ *      08/07/2007  MHC    	1. Porting from 9x series PHYCFG.h.
++ *							2. Reorganize code architecture.
++ * 
++ *****************************************************************************/
++ /* Check to see if the file has been included already.  */
++#ifndef __INC_HAL8192CPHYCFG_H
++#define __INC_HAL8192CPHYCFG_H
++
++
++/*--------------------------Define Parameters-------------------------------*/
++#define LOOP_LIMIT				5
++#define MAX_STALL_TIME			50		//us
++#define AntennaDiversityValue	0x80	//(Adapter->bSoftwareAntennaDiversity ? 0x00:0x80)
++#define MAX_TXPWR_IDX_NMODE_92S	63
++#define Reset_Cnt_Limit			3
++
++#define IQK_MAC_REG_NUM		4
++#define IQK_ADDA_REG_NUM		16
++#define IQK_BB_REG_NUM			9
++#define HP_THERMAL_NUM		8
++
++#ifdef CONFIG_PCI_HCI
++#define MAX_AGGR_NUM	0x0A0A
++#else
++#define MAX_AGGR_NUM	0x0909
++#endif
++
++#ifdef CONFIG_PCI_HCI
++#define	SET_RTL8192SE_RF_SLEEP(_pAdapter)							\
++{																	\
++	u1Byte		u1bTmp;												\
++	u1bTmp = PlatformEFIORead1Byte(_pAdapter, REG_LDOV12D_CTRL);		\
++	u1bTmp |= BIT0;													\
++	PlatformEFIOWrite1Byte(_pAdapter, REG_LDOV12D_CTRL, u1bTmp);		\
++	PlatformEFIOWrite1Byte(_pAdapter, REG_SPS_OCP_CFG, 0x0);				\
++	PlatformEFIOWrite1Byte(_pAdapter, TXPAUSE, 0xFF);				\
++	PlatformEFIOWrite2Byte(_pAdapter, CMDR, 0x57FC);				\
++	delay_us(100);													\
++	PlatformEFIOWrite2Byte(_pAdapter, CMDR, 0x77FC);				\
++	PlatformEFIOWrite1Byte(_pAdapter, PHY_CCA, 0x0);				\
++	delay_us(10);													\
++	PlatformEFIOWrite2Byte(_pAdapter, CMDR, 0x37FC);				\
++	delay_us(10);													\
++	PlatformEFIOWrite2Byte(_pAdapter, CMDR, 0x77FC);				\
++	delay_us(10);													\
++	PlatformEFIOWrite2Byte(_pAdapter, CMDR, 0x57FC);				\
++}
++#endif
++
++
++/*--------------------------Define Parameters-------------------------------*/
++
++
++/*------------------------------Define structure----------------------------*/ 
++typedef enum _SwChnlCmdID{
++	CmdID_End,
++	CmdID_SetTxPowerLevel,
++	CmdID_BBRegWrite10,
++	CmdID_WritePortUlong,
++	CmdID_WritePortUshort,
++	CmdID_WritePortUchar,
++	CmdID_RF_WriteReg,
++}SwChnlCmdID;
++
++
++/* 1. Switch channel related */
++typedef struct _SwChnlCmd{
++	SwChnlCmdID	CmdID;
++	u32			Para1;
++	u32			Para2;
++	u32			msDelay;
++}SwChnlCmd;
++
++typedef enum _HW90_BLOCK{
++	HW90_BLOCK_MAC = 0,
++	HW90_BLOCK_PHY0 = 1,
++	HW90_BLOCK_PHY1 = 2,
++	HW90_BLOCK_RF = 3,
++	HW90_BLOCK_MAXIMUM = 4, // Never use this
++}HW90_BLOCK_E, *PHW90_BLOCK_E;
++
++#define	RF_PATH_MAX			2
++
++#define CHANNEL_MAX_NUMBER		14	// 14 is the max channel number
++#define CHANNEL_GROUP_MAX		3	// ch1~3, ch4~9, ch10~14 total three groups
++
++typedef enum _WIRELESS_MODE {
++	WIRELESS_MODE_UNKNOWN = 0x00,
++	WIRELESS_MODE_A = 0x01,
++	WIRELESS_MODE_B = 0x02,
++	WIRELESS_MODE_G = 0x04,
++	WIRELESS_MODE_AUTO = 0x08,
++	WIRELESS_MODE_N_24G = 0x10,
++	WIRELESS_MODE_N_5G = 0x20
++} WIRELESS_MODE;
++
++typedef enum _BaseBand_Config_Type{
++	BaseBand_Config_PHY_REG = 0,			//Radio Path A
++	BaseBand_Config_AGC_TAB = 1,			//Radio Path B
++}BaseBand_Config_Type, *PBaseBand_Config_Type;
++
++
++typedef enum _PHY_Rate_Tx_Power_Offset_Area{
++	RA_OFFSET_LEGACY_OFDM1,
++	RA_OFFSET_LEGACY_OFDM2,
++	RA_OFFSET_HT_OFDM1,
++	RA_OFFSET_HT_OFDM2,
++	RA_OFFSET_HT_OFDM3,
++	RA_OFFSET_HT_OFDM4,
++	RA_OFFSET_HT_CCK,
++}RA_OFFSET_AREA,*PRA_OFFSET_AREA;
++
++
++/* BB/RF related */
++typedef	enum _RF_TYPE_8190P{
++	RF_TYPE_MIN,	// 0
++	RF_8225=1,			// 1 11b/g RF for verification only
++	RF_8256=2,			// 2 11b/g/n 
++	RF_8258=3,			// 3 11a/b/g/n RF
++	RF_6052=4,		// 4 11b/g/n RF
++	//RF_6052=5,		// 4 11b/g/n RF
++	// TODO: We sholud remove this psudo PHY RF after we get new RF.
++	RF_PSEUDO_11N=5,	// 5, It is a temporality RF. 
++}RF_TYPE_8190P_E,*PRF_TYPE_8190P_E;
++
++typedef struct _BB_REGISTER_DEFINITION{
++	u32 rfintfs;			// set software control: 
++							//		0x870~0x877[8 bytes]
++							
++	u32 rfintfi;			// readback data: 
++							//		0x8e0~0x8e7[8 bytes]
++							
++	u32 rfintfo; 		// output data: 
++							//		0x860~0x86f [16 bytes]
++							
++	u32 rfintfe; 		// output enable: 
++							//		0x860~0x86f [16 bytes]
++							
++	u32 rf3wireOffset;	// LSSI data:
++							//		0x840~0x84f [16 bytes]
++							
++	u32 rfLSSI_Select;	// BB Band Select: 
++							//		0x878~0x87f [8 bytes]
++							
++	u32 rfTxGainStage;	// Tx gain stage: 
++							//		0x80c~0x80f [4 bytes]
++							
++	u32 rfHSSIPara1; 	// wire parameter control1 : 
++							//		0x820~0x823,0x828~0x82b, 0x830~0x833, 0x838~0x83b [16 bytes]
++							
++	u32 rfHSSIPara2; 	// wire parameter control2 : 
++							//		0x824~0x827,0x82c~0x82f, 0x834~0x837, 0x83c~0x83f [16 bytes]
++								
++	u32 rfSwitchControl; //Tx Rx antenna control : 
++							//		0x858~0x85f [16 bytes]
++								
++	u32 rfAGCControl1; 	//AGC parameter control1 : 
++							//		0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63, 0xc68~0xc6b [16 bytes] 
++								
++	u32 rfAGCControl2; 	//AGC parameter control2 : 
++							//		0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67, 0xc6c~0xc6f [16 bytes] 
++							
++	u32 rfRxIQImbalance; //OFDM Rx IQ imbalance matrix : 
++							//		0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27, 0xc2c~0xc2f [16 bytes]
++							
++	u32 rfRxAFE;  		//Rx IQ DC ofset and Rx digital filter, Rx DC notch filter : 
++							//		0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23, 0xc28~0xc2b [16 bytes]
++							
++	u32 rfTxIQImbalance; //OFDM Tx IQ imbalance matrix
++							//		0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93, 0xc98~0xc9b [16 bytes]
++							
++	u32 rfTxAFE; 		//Tx IQ DC Offset and Tx DFIR type
++							//		0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97, 0xc9c~0xc9f [16 bytes]
++								
++	u32 rfLSSIReadBack; 	//LSSI RF readback data SI mode
++								//		0x8a0~0x8af [16 bytes]
++
++	u32 rfLSSIReadBackPi; 	//LSSI RF readback data PI mode 0x8b8-8bc for Path A and B
++
++}BB_REGISTER_DEFINITION_T, *PBB_REGISTER_DEFINITION_T;
++
++#ifdef CONFIG_MP_INCLUDED
++typedef enum _ANTENNA_PATH{
++        ANTENNA_NONE 	= 0x00,
++		ANTENNA_D		,
++		ANTENNA_C		,
++		ANTENNA_CD		,
++		ANTENNA_B		,
++		ANTENNA_BD		,
++		ANTENNA_BC		,
++		ANTENNA_BCD		,
++		ANTENNA_A		,
++		ANTENNA_AD		,
++		ANTENNA_AC		,
++		ANTENNA_ACD		,
++		ANTENNA_AB		,
++		ANTENNA_ABD		,
++		ANTENNA_ABC		,
++		ANTENNA_ABCD	
++} ANTENNA_PATH;
++#endif
++
++typedef struct _R_ANTENNA_SELECT_OFDM{	
++	u32			r_tx_antenna:4;	
++	u32			r_ant_l:4;
++	u32			r_ant_non_ht:4;	
++	u32			r_ant_ht1:4;
++	u32			r_ant_ht2:4;
++	u32			r_ant_ht_s1:4;
++	u32			r_ant_non_ht_s1:4;
++	u32			OFDM_TXSC:2;
++	u32			Reserved:2;
++}R_ANTENNA_SELECT_OFDM;
++
++typedef struct _R_ANTENNA_SELECT_CCK{
++	u8			r_cckrx_enable_2:2;	
++	u8			r_cckrx_enable:2;
++	u8			r_ccktx_enable:4;
++}R_ANTENNA_SELECT_CCK;
++
++/*------------------------------Define structure----------------------------*/ 
++
++
++/*------------------------Export global variable----------------------------*/
++/*------------------------Export global variable----------------------------*/
++
++
++/*------------------------Export Marco Definition---------------------------*/
++/*------------------------Export Marco Definition---------------------------*/
++
++
++/*--------------------------Exported Function prototype---------------------*/
++//
++// BB and RF register read/write
++//
++u32	rtl8192c_PHY_QueryBBReg(	IN	PADAPTER	Adapter,
++								IN	u32		RegAddr,
++								IN	u32		BitMask	);
++void	rtl8192c_PHY_SetBBReg(	IN	PADAPTER	Adapter,
++								IN	u32		RegAddr,
++								IN	u32		BitMask,
++								IN	u32		Data	);
++u32	rtl8192c_PHY_QueryRFReg(	IN	PADAPTER			Adapter,
++								IN	RF_RADIO_PATH_E	eRFPath,
++								IN	u32				RegAddr,
++								IN	u32				BitMask	);
++void	rtl8192c_PHY_SetRFReg(	IN	PADAPTER			Adapter,
++								IN	RF_RADIO_PATH_E	eRFPath,
++								IN	u32				RegAddr,
++								IN	u32				BitMask,
++								IN	u32				Data	);
++
++//
++// Initialization related function
++//
++/* MAC/BB/RF HAL config */
++int	PHY_MACConfig8192C(	IN	PADAPTER	Adapter	);
++int	PHY_BBConfig8192C(	IN	PADAPTER	Adapter	);
++int	PHY_RFConfig8192C(	IN	PADAPTER	Adapter	);
++/* RF config */
++int	rtl8192c_PHY_ConfigRFWithParaFile(	IN	PADAPTER	Adapter,
++												IN	u8* 	pFileName,
++												IN	RF_RADIO_PATH_E	eRFPath);
++int	rtl8192c_PHY_ConfigRFWithHeaderFile(	IN	PADAPTER			Adapter,
++												IN	RF_RADIO_PATH_E	eRFPath);
++
++/* BB/RF readback check for making sure init OK */
++int	rtl8192c_PHY_CheckBBAndRFOK(	IN	PADAPTER			Adapter,
++										IN	HW90_BLOCK_E		CheckBlock,
++										IN	RF_RADIO_PATH_E	eRFPath	  );
++/* Read initi reg value for tx power setting. */
++void	rtl8192c_PHY_GetHWRegOriginalValue(	IN	PADAPTER		Adapter	);
++
++//
++// RF Power setting
++//
++//extern	BOOLEAN	PHY_SetRFPowerState(IN	PADAPTER			Adapter, 
++//									IN	RT_RF_POWER_STATE	eRFPowerState);
++
++//
++// BB TX Power R/W
++//
++void	PHY_GetTxPowerLevel8192C(	IN	PADAPTER		Adapter,
++											OUT u32*    		powerlevel	);
++void	PHY_SetTxPowerLevel8192C(	IN	PADAPTER		Adapter,
++											IN	u8			channel	);
++BOOLEAN	PHY_UpdateTxPowerDbm8192C(	IN	PADAPTER	Adapter,
++											IN	int		powerInDbm	);
++
++//
++VOID 
++PHY_ScanOperationBackup8192C(IN	PADAPTER	Adapter,
++										IN	u8		Operation	);
++
++//
++// Switch bandwidth for 8192S
++//
++//extern	void	PHY_SetBWModeCallback8192C(	IN	PRT_TIMER		pTimer	);
++void	PHY_SetBWMode8192C(	IN	PADAPTER			pAdapter,
++									IN	HT_CHANNEL_WIDTH	ChnlWidth,
++									IN	unsigned char	Offset	);
++
++//
++// Set FW CMD IO for 8192S.
++//
++//extern	BOOLEAN HalSetIO8192C(	IN	PADAPTER			Adapter,
++//									IN	IO_TYPE				IOType);
++
++//
++// Set A2 entry to fw for 8192S
++//
++extern	void FillA2Entry8192C(		IN	PADAPTER			Adapter,
++										IN	u8				index,
++										IN	u8*				val);
++
++
++//
++// channel switch related funciton
++//
++//extern	void	PHY_SwChnlCallback8192C(	IN	PRT_TIMER		pTimer	);
++void	PHY_SwChnl8192C(	IN	PADAPTER		pAdapter,
++									IN	u8			channel	);
++				// Call after initialization
++void	PHY_SwChnlPhy8192C(	IN	PADAPTER		pAdapter,
++									IN	u8			channel	);
++
++void ChkFwCmdIoDone(	IN	PADAPTER	Adapter);
++
++#ifdef USE_WORKITEM	
++//extern 	void SetIOWorkItemCallback( IN PVOID            pContext );
++#else
++//extern	void SetIOTimerCallback( IN PRT_TIMER		pTimer);
++#endif	
++				
++//
++// BB/MAC/RF other monitor API
++//
++void	PHY_SetMonitorMode8192C(IN	PADAPTER	pAdapter,
++										IN	BOOLEAN		bEnableMonitorMode	);
++
++BOOLEAN	PHY_CheckIsLegalRfPath8192C(IN	PADAPTER	pAdapter,
++											IN	u32		eRFPath	);
++
++//
++// IQ calibrate
++//
++VOID rtl8192c_PHY_IQCalibrate( IN PADAPTER pAdapter , IN BOOLEAN bReCovery);
++
++//
++// LC calibrate
++//
++VOID rtl8192c_PHY_LCCalibrate(IN	PADAPTER	pAdapter);
++
++//
++// AP calibrate
++//
++VOID rtl8192c_PHY_APCalibrate(IN	PADAPTER	pAdapter, IN 	char		delta);
++
++VOID rtl8192c_PHY_SetRFPathSwitch(IN	PADAPTER	pAdapter, IN	BOOLEAN		bMain);
++
++//
++// Modify the value of the hw register when beacon interval be changed.
++//
++void	
++rtl8192c_PHY_SetBeaconHwReg(	IN	PADAPTER		Adapter,
++					IN	u16			BeaconInterval	);
++
++
++extern	VOID
++PHY_SwitchEphyParameter(
++	IN	PADAPTER			Adapter
++	);
++
++extern	VOID
++PHY_EnableHostClkReq(
++	IN	PADAPTER			Adapter
++	);
++
++BOOLEAN
++SetAntennaConfig92C(
++	IN	PADAPTER	Adapter,
++	IN	u8		DefaultAnt	
++	);
++
++
++/*--------------------------Exported Function prototype---------------------*/
++
++#define PHY_QueryBBReg(Adapter, RegAddr, BitMask) rtl8192c_PHY_QueryBBReg((Adapter), (RegAddr), (BitMask))
++#define PHY_SetBBReg(Adapter, RegAddr, BitMask, Data) rtl8192c_PHY_SetBBReg((Adapter), (RegAddr), (BitMask), (Data))
++#define PHY_QueryRFReg(Adapter, eRFPath, RegAddr, BitMask) rtl8192c_PHY_QueryRFReg((Adapter), (eRFPath), (RegAddr), (BitMask))
++#define PHY_SetRFReg(Adapter, eRFPath, RegAddr, BitMask, Data) rtl8192c_PHY_SetRFReg((Adapter), (eRFPath), (RegAddr), (BitMask), (Data))
++
++#define PHY_SetMacReg	PHY_SetBBReg
++
++#endif	// __INC_HAL8192CPHYCFG_H
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/Hal8192CPhyReg.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/Hal8192CPhyReg.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/Hal8192CPhyReg.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/Hal8192CPhyReg.h	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,1123 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++/*****************************************************************************
++ *
++ * Module:	__INC_HAL8192CPHYREG_H
++ *
++ *
++ * Note:	1. Define PMAC/BB register map
++ *			2. Define RF register map
++ *			3. PMAC/BB register bit mask.
++ *			4. RF reg bit mask.
++ *			5. Other BB/RF relative definition.
++ *			
++ *
++ * Export:	Constants, macro, functions(API), global variables(None).
++ *
++ * Abbrev:	
++ *
++ * History:
++ *		Data		Who		Remark 
++ *      08/07/2007  MHC    	1. Porting from 9x series PHYCFG.h.
++ *							2. Reorganize code architecture.
++ *	09/25/2008	MH		1. Add RL6052 register definition
++ * 
++ *****************************************************************************/
++#ifndef __INC_HAL8192CPHYREG_H
++#define __INC_HAL8192CPHYREG_H
++
++
++/*--------------------------Define Parameters-------------------------------*/
++
++//============================================================
++//       8192S Regsiter offset definition
++//============================================================
++
++//
++// BB-PHY register PMAC 0x100 PHY 0x800 - 0xEFF
++// 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF
++// 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00
++// 3. RF register 0x00-2E
++// 4. Bit Mask for BB/RF register
++// 5. Other defintion for BB/RF R/W
++//
++
++
++//
++// 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF
++// 1. Page1(0x100)
++//
++#define		rPMAC_Reset					0x100
++#define		rPMAC_TxStart					0x104
++#define		rPMAC_TxLegacySIG				0x108
++#define		rPMAC_TxHTSIG1				0x10c
++#define		rPMAC_TxHTSIG2				0x110
++#define		rPMAC_PHYDebug				0x114
++#define		rPMAC_TxPacketNum				0x118
++#define		rPMAC_TxIdle					0x11c
++#define		rPMAC_TxMACHeader0			0x120
++#define		rPMAC_TxMACHeader1			0x124
++#define		rPMAC_TxMACHeader2			0x128
++#define		rPMAC_TxMACHeader3			0x12c
++#define		rPMAC_TxMACHeader4			0x130
++#define		rPMAC_TxMACHeader5			0x134
++#define		rPMAC_TxDataType				0x138
++#define		rPMAC_TxRandomSeed			0x13c
++#define		rPMAC_CCKPLCPPreamble			0x140
++#define		rPMAC_CCKPLCPHeader			0x144
++#define		rPMAC_CCKCRC16				0x148
++#define		rPMAC_OFDMRxCRC32OK			0x170
++#define		rPMAC_OFDMRxCRC32Er			0x174
++#define		rPMAC_OFDMRxParityEr			0x178
++#define		rPMAC_OFDMRxCRC8Er			0x17c
++#define		rPMAC_CCKCRxRC16Er			0x180
++#define		rPMAC_CCKCRxRC32Er			0x184
++#define		rPMAC_CCKCRxRC32OK			0x188
++#define		rPMAC_TxStatus					0x18c
++
++//
++// 2. Page2(0x200)
++//
++// The following two definition are only used for USB interface.
++#define		RF_BB_CMD_ADDR				0x02c0	// RF/BB read/write command address.
++#define		RF_BB_CMD_DATA				0x02c4	// RF/BB read/write command data.
++
++//
++// 3. Page8(0x800)
++//
++#define		rFPGA0_RFMOD				0x800	//RF mode & CCK TxSC // RF BW Setting??
++
++#define		rFPGA0_TxInfo				0x804	// Status report??
++#define		rFPGA0_PSDFunction			0x808
++
++#define		rFPGA0_TxGainStage			0x80c	// Set TX PWR init gain?
++
++#define		rFPGA0_RFTiming1			0x810	// Useless now
++#define		rFPGA0_RFTiming2			0x814
++
++#define		rFPGA0_XA_HSSIParameter1		0x820	// RF 3 wire register
++#define		rFPGA0_XA_HSSIParameter2		0x824
++#define		rFPGA0_XB_HSSIParameter1		0x828
++#define		rFPGA0_XB_HSSIParameter2		0x82c
++#define		rTxAGC_B_Rate18_06				0x830
++#define		rTxAGC_B_Rate54_24				0x834
++#define		rTxAGC_B_CCK1_55_Mcs32		0x838
++#define		rTxAGC_B_Mcs03_Mcs00			0x83c
++
++#define		rTxAGC_B_Mcs07_Mcs04			0x848
++#define		rTxAGC_B_Mcs11_Mcs08			0x84c
++
++#define		rFPGA0_XA_LSSIParameter		0x840
++#define		rFPGA0_XB_LSSIParameter		0x844
++
++#define		rFPGA0_RFWakeUpParameter		0x850	// Useless now
++#define		rFPGA0_RFSleepUpParameter		0x854
++
++#define		rFPGA0_XAB_SwitchControl		0x858	// RF Channel switch
++#define		rFPGA0_XCD_SwitchControl		0x85c
++
++#define		rFPGA0_XA_RFInterfaceOE		0x860	// RF Channel switch
++#define		rFPGA0_XB_RFInterfaceOE		0x864
++
++#define		rTxAGC_B_Mcs15_Mcs12			0x868
++#define		rTxAGC_B_CCK11_A_CCK2_11		0x86c
++
++#define		rFPGA0_XAB_RFInterfaceSW		0x870	// RF Interface Software Control
++#define		rFPGA0_XCD_RFInterfaceSW		0x874
++
++#define		rFPGA0_XAB_RFParameter		0x878	// RF Parameter
++#define		rFPGA0_XCD_RFParameter		0x87c
++
++#define		rFPGA0_AnalogParameter1		0x880	// Crystal cap setting RF-R/W protection for parameter4??
++#define		rFPGA0_AnalogParameter2		0x884
++#define		rFPGA0_AnalogParameter3		0x888	// Useless now
++#define		rFPGA0_AnalogParameter4		0x88c
++
++#define		rFPGA0_XA_LSSIReadBack		0x8a0	// Tranceiver LSSI Readback
++#define		rFPGA0_XB_LSSIReadBack		0x8a4
++#define		rFPGA0_XC_LSSIReadBack		0x8a8
++#define		rFPGA0_XD_LSSIReadBack		0x8ac
++
++#define		rFPGA0_PSDReport				0x8b4	// Useless now
++#define		TransceiverA_HSPI_Readback	0x8b8	// Transceiver A HSPI Readback
++#define		TransceiverB_HSPI_Readback	0x8bc	// Transceiver B HSPI Readback
++#define		rFPGA0_XAB_RFInterfaceRB		0x8e0	// Useless now // RF Interface Readback Value
++#define		rFPGA0_XCD_RFInterfaceRB		0x8e4	// Useless now
++
++//
++// 4. Page9(0x900)
++//
++#define		rFPGA1_RFMOD				0x900	//RF mode & OFDM TxSC // RF BW Setting??
++
++#define		rFPGA1_TxBlock				0x904	// Useless now
++#define		rFPGA1_DebugSelect			0x908	// Useless now
++#define		rFPGA1_TxInfo				0x90c	// Useless now // Status report??
++
++//
++// 5. PageA(0xA00)
++//
++// Set Control channel to upper or lower. These settings are required only for 40MHz
++#define		rCCK0_System				0xa00
++
++#define		rCCK0_AFESetting			0xa04	// Disable init gain now // Select RX path by RSSI
++#define		rCCK0_CCA					0xa08	// Disable init gain now // Init gain
++
++#define		rCCK0_RxAGC1				0xa0c 	//AGC default value, saturation level // Antenna Diversity, RX AGC, LNA Threshold, RX LNA Threshold useless now. Not the same as 90 series
++#define		rCCK0_RxAGC2				0xa10 	//AGC & DAGC
++
++#define		rCCK0_RxHP					0xa14
++
++#define		rCCK0_DSPParameter1		0xa18	//Timing recovery & Channel estimation threshold
++#define		rCCK0_DSPParameter2		0xa1c	//SQ threshold
++
++#define		rCCK0_TxFilter1				0xa20
++#define		rCCK0_TxFilter2				0xa24
++#define		rCCK0_DebugPort			0xa28	//debug port and Tx filter3
++#define		rCCK0_FalseAlarmReport		0xa2c	//0xa2d	useless now 0xa30-a4f channel report
++#define		rCCK0_TRSSIReport         		0xa50
++#define		rCCK0_RxReport            		0xa54  //0xa57
++#define		rCCK0_FACounterLower      	0xa5c  //0xa5b
++#define		rCCK0_FACounterUpper      	0xa58  //0xa5c
++
++//
++// PageB(0xB00)
++//
++#define		rPdp_AntA      				0xb00  
++#define		rPdp_AntA_4    				0xb04
++#define		rConfig_Pmpd_AntA 			0xb28
++#define		rConfig_AntA 				0xb68
++#define		rConfig_AntB 				0xb6c
++#define		rPdp_AntB 					0xb70
++#define		rPdp_AntB_4 				0xb74
++#define		rConfig_Pmpd_AntB			0xb98
++#define		rAPK						0xbd8
++
++//
++// 6. PageC(0xC00)
++//
++#define		rOFDM0_LSTF				0xc00
++
++#define		rOFDM0_TRxPathEnable		0xc04
++#define		rOFDM0_TRMuxPar			0xc08
++#define		rOFDM0_TRSWIsolation		0xc0c
++
++#define		rOFDM0_XARxAFE			0xc10  //RxIQ DC offset, Rx digital filter, DC notch filter
++#define		rOFDM0_XARxIQImbalance    	0xc14  //RxIQ imblance matrix
++#define		rOFDM0_XBRxAFE            		0xc18
++#define		rOFDM0_XBRxIQImbalance    	0xc1c
++#define		rOFDM0_XCRxAFE            		0xc20
++#define		rOFDM0_XCRxIQImbalance    	0xc24
++#define		rOFDM0_XDRxAFE            		0xc28
++#define		rOFDM0_XDRxIQImbalance    	0xc2c
++
++#define		rOFDM0_RxDetector1			0xc30  //PD,BW & SBD	// DM tune init gain
++#define		rOFDM0_RxDetector2			0xc34  //SBD & Fame Sync. 
++#define		rOFDM0_RxDetector3			0xc38  //Frame Sync.
++#define		rOFDM0_RxDetector4			0xc3c  //PD, SBD, Frame Sync & Short-GI
++
++#define		rOFDM0_RxDSP				0xc40  //Rx Sync Path
++#define		rOFDM0_CFOandDAGC		0xc44  //CFO & DAGC
++#define		rOFDM0_CCADropThreshold	0xc48 //CCA Drop threshold
++#define		rOFDM0_ECCAThreshold		0xc4c // energy CCA
++
++#define		rOFDM0_XAAGCCore1			0xc50	// DIG
++#define		rOFDM0_XAAGCCore2			0xc54
++#define		rOFDM0_XBAGCCore1			0xc58
++#define		rOFDM0_XBAGCCore2			0xc5c
++#define		rOFDM0_XCAGCCore1			0xc60
++#define		rOFDM0_XCAGCCore2			0xc64
++#define		rOFDM0_XDAGCCore1			0xc68
++#define		rOFDM0_XDAGCCore2			0xc6c
++
++#define		rOFDM0_AGCParameter1			0xc70
++#define		rOFDM0_AGCParameter2			0xc74
++#define		rOFDM0_AGCRSSITable			0xc78
++#define		rOFDM0_HTSTFAGC				0xc7c
++
++#define		rOFDM0_XATxIQImbalance		0xc80	// TX PWR TRACK and DIG
++#define		rOFDM0_XATxAFE				0xc84
++#define		rOFDM0_XBTxIQImbalance		0xc88
++#define		rOFDM0_XBTxAFE				0xc8c
++#define		rOFDM0_XCTxIQImbalance		0xc90
++#define		rOFDM0_XCTxAFE            			0xc94
++#define		rOFDM0_XDTxIQImbalance		0xc98
++#define		rOFDM0_XDTxAFE				0xc9c
++
++#define		rOFDM0_RxIQExtAnta			0xca0
++#define		rOFDM0_TxCoeff1				0xca4
++#define		rOFDM0_TxCoeff2				0xca8
++#define		rOFDM0_TxCoeff3				0xcac
++#define		rOFDM0_TxCoeff4				0xcb0
++#define		rOFDM0_TxCoeff5				0xcb4
++#define		rOFDM0_TxCoeff6				0xcb8
++#define		rOFDM0_RxHPParameter			0xce0
++#define		rOFDM0_TxPseudoNoiseWgt		0xce4
++#define		rOFDM0_FrameSync				0xcf0
++#define		rOFDM0_DFSReport				0xcf4
++
++//
++// 7. PageD(0xD00)
++//
++#define		rOFDM1_LSTF					0xd00
++#define		rOFDM1_TRxPathEnable			0xd04
++
++#define		rOFDM1_CFO						0xd08	// No setting now
++#define		rOFDM1_CSI1					0xd10
++#define		rOFDM1_SBD						0xd14
++#define		rOFDM1_CSI2					0xd18
++#define		rOFDM1_CFOTracking			0xd2c
++#define		rOFDM1_TRxMesaure1			0xd34
++#define		rOFDM1_IntfDet					0xd3c
++#define		rOFDM1_PseudoNoiseStateAB		0xd50
++#define		rOFDM1_PseudoNoiseStateCD		0xd54
++#define		rOFDM1_RxPseudoNoiseWgt		0xd58
++
++#define		rOFDM_PHYCounter1				0xda0  //cca, parity fail
++#define		rOFDM_PHYCounter2				0xda4  //rate illegal, crc8 fail
++#define		rOFDM_PHYCounter3				0xda8  //MCS not support
++
++#define		rOFDM_ShortCFOAB				0xdac	// No setting now
++#define		rOFDM_ShortCFOCD				0xdb0
++#define		rOFDM_LongCFOAB				0xdb4
++#define		rOFDM_LongCFOCD				0xdb8
++#define		rOFDM_TailCFOAB				0xdbc
++#define		rOFDM_TailCFOCD				0xdc0
++#define		rOFDM_PWMeasure1          		0xdc4
++#define		rOFDM_PWMeasure2          		0xdc8
++#define		rOFDM_BWReport				0xdcc
++#define		rOFDM_AGCReport				0xdd0
++#define		rOFDM_RxSNR					0xdd4
++#define		rOFDM_RxEVMCSI				0xdd8
++#define		rOFDM_SIGReport				0xddc
++
++
++//
++// 8. PageE(0xE00)
++//
++#define		rTxAGC_A_Rate18_06			0xe00
++#define		rTxAGC_A_Rate54_24			0xe04
++#define		rTxAGC_A_CCK1_Mcs32			0xe08
++#define		rTxAGC_A_Mcs03_Mcs00			0xe10
++#define		rTxAGC_A_Mcs07_Mcs04			0xe14
++#define		rTxAGC_A_Mcs11_Mcs08			0xe18
++#define		rTxAGC_A_Mcs15_Mcs12			0xe1c
++
++#define		rFPGA0_IQK					0xe28
++#define		rTx_IQK_Tone_A				0xe30
++#define		rRx_IQK_Tone_A				0xe34
++#define		rTx_IQK_PI_A					0xe38
++#define		rRx_IQK_PI_A					0xe3c
++
++#define		rTx_IQK 						0xe40
++#define		rRx_IQK						0xe44
++#define		rIQK_AGC_Pts					0xe48
++#define		rIQK_AGC_Rsp					0xe4c
++#define		rTx_IQK_Tone_B				0xe50
++#define		rRx_IQK_Tone_B				0xe54
++#define		rTx_IQK_PI_B					0xe58
++#define		rRx_IQK_PI_B					0xe5c
++#define		rIQK_AGC_Cont				0xe60
++
++#define		rBlue_Tooth					0xe6c
++#define		rRx_Wait_CCA					0xe70
++#define		rTx_CCK_RFON					0xe74
++#define		rTx_CCK_BBON				0xe78
++#define		rTx_OFDM_RFON				0xe7c
++#define		rTx_OFDM_BBON				0xe80
++#define		rTx_To_Rx					0xe84
++#define		rTx_To_Tx					0xe88
++#define		rRx_CCK						0xe8c
++
++#define		rTx_Power_Before_IQK_A		0xe94
++#define		rTx_Power_After_IQK_A			0xe9c
++
++#define		rRx_Power_Before_IQK_A		0xea0
++#define		rRx_Power_Before_IQK_A_2		0xea4
++#define		rRx_Power_After_IQK_A			0xea8
++#define		rRx_Power_After_IQK_A_2		0xeac
++
++#define		rTx_Power_Before_IQK_B		0xeb4
++#define		rTx_Power_After_IQK_B			0xebc
++
++#define		rRx_Power_Before_IQK_B		0xec0
++#define		rRx_Power_Before_IQK_B_2		0xec4
++#define		rRx_Power_After_IQK_B			0xec8
++#define		rRx_Power_After_IQK_B_2		0xecc
++
++#define		rRx_OFDM					0xed0
++#define		rRx_Wait_RIFS 				0xed4
++#define		rRx_TO_Rx 					0xed8
++#define		rStandby 						0xedc
++#define		rSleep 						0xee0
++#define		rPMPD_ANAEN				0xeec
++
++//
++// 7. RF Register 0x00-0x2E (RF 8256)
++//    RF-0222D 0x00-3F
++//
++//Zebra1
++#define		rZebra1_HSSIEnable				0x0	// Useless now
++#define		rZebra1_TRxEnable1				0x1
++#define		rZebra1_TRxEnable2				0x2
++#define		rZebra1_AGC					0x4
++#define		rZebra1_ChargePump			0x5
++#define		rZebra1_Channel				0x7	// RF channel switch
++
++//#endif
++#define		rZebra1_TxGain					0x8	// Useless now
++#define		rZebra1_TxLPF					0x9
++#define		rZebra1_RxLPF					0xb
++#define		rZebra1_RxHPFCorner			0xc
++
++//Zebra4
++#define		rGlobalCtrl						0	// Useless now
++#define		rRTL8256_TxLPF					19
++#define		rRTL8256_RxLPF					11
++
++//RTL8258
++#define		rRTL8258_TxLPF					0x11	// Useless now
++#define		rRTL8258_RxLPF					0x13
++#define		rRTL8258_RSSILPF				0xa
++
++//
++// RL6052 Register definition
++//
++#define		RF_AC						0x00	// 
++
++#define		RF_IQADJ_G1				0x01	// 
++#define		RF_IQADJ_G2				0x02	// 
++#define		RF_BS_PA_APSET_G1_G4		0x03
++#define		RF_BS_PA_APSET_G5_G8		0x04
++#define		RF_POW_TRSW				0x05	// 
++
++#define		RF_GAIN_RX					0x06	// 
++#define		RF_GAIN_TX					0x07	// 
++
++#define		RF_TXM_IDAC				0x08	// 
++#define		RF_IPA_G					0x09	// 
++#define		RF_TXBIAS_G				0x0A
++#define		RF_TXPA_AG					0x0B
++#define		RF_IPA_A					0x0C	// 
++#define		RF_TXBIAS_A				0x0D
++#define		RF_BS_PA_APSET_G9_G11	0x0E
++#define		RF_BS_IQGEN				0x0F	// 
++
++#define		RF_MODE1					0x10	// 
++#define		RF_MODE2					0x11	// 
++
++#define		RF_RX_AGC_HP				0x12	// 
++#define		RF_TX_AGC					0x13	// 
++#define		RF_BIAS						0x14	// 
++#define		RF_IPA						0x15	// 
++#define		RF_POW_ABILITY			0x17	// 
++#define		RF_MODE_AG				0x18	// 
++#define		rRfChannel					0x18	// RF channel and BW switch
++#define		RF_CHNLBW					0x18	// RF channel and BW switch
++#define		RF_TOP						0x19	// 
++
++#define		RF_RX_G1					0x1A	// 
++#define		RF_RX_G2					0x1B	// 
++
++#define		RF_RX_BB2					0x1C	// 
++#define		RF_RX_BB1					0x1D	// 
++
++#define		RF_RCK1					0x1E	// 
++#define		RF_RCK2					0x1F	// 
++
++#define		RF_TX_G1					0x20	// 
++#define		RF_TX_G2					0x21	// 
++#define		RF_TX_G3					0x22	// 
++
++#define		RF_TX_BB1					0x23	// 
++
++#define		RF_T_METER					0x24	// 
++
++#define		RF_SYN_G1					0x25	// RF TX Power control
++#define		RF_SYN_G2					0x26	// RF TX Power control
++#define		RF_SYN_G3					0x27	// RF TX Power control
++#define		RF_SYN_G4					0x28	// RF TX Power control
++#define		RF_SYN_G5					0x29	// RF TX Power control
++#define		RF_SYN_G6					0x2A	// RF TX Power control
++#define		RF_SYN_G7					0x2B	// RF TX Power control
++#define		RF_SYN_G8					0x2C	// RF TX Power control
++
++#define		RF_RCK_OS					0x30	// RF TX PA control
++
++#define		RF_TXPA_G1					0x31	// RF TX PA control
++#define		RF_TXPA_G2					0x32	// RF TX PA control
++#define		RF_TXPA_G3					0x33	// RF TX PA control
++
++//
++//Bit Mask
++//
++// 1. Page1(0x100)
++#define		bBBResetB						0x100	// Useless now?
++#define		bGlobalResetB					0x200
++#define		bOFDMTxStart					0x4
++#define		bCCKTxStart						0x8
++#define		bCRC32Debug					0x100
++#define		bPMACLoopback					0x10
++#define		bTxLSIG							0xffffff
++#define		bOFDMTxRate					0xf
++#define		bOFDMTxReserved				0x10
++#define		bOFDMTxLength					0x1ffe0
++#define		bOFDMTxParity					0x20000
++#define		bTxHTSIG1						0xffffff
++#define		bTxHTMCSRate					0x7f
++#define		bTxHTBW						0x80
++#define		bTxHTLength					0xffff00
++#define		bTxHTSIG2						0xffffff
++#define		bTxHTSmoothing					0x1
++#define		bTxHTSounding					0x2
++#define		bTxHTReserved					0x4
++#define		bTxHTAggreation				0x8
++#define		bTxHTSTBC						0x30
++#define		bTxHTAdvanceCoding			0x40
++#define		bTxHTShortGI					0x80
++#define		bTxHTNumberHT_LTF			0x300
++#define		bTxHTCRC8						0x3fc00
++#define		bCounterReset					0x10000
++#define		bNumOfOFDMTx					0xffff
++#define		bNumOfCCKTx					0xffff0000
++#define		bTxIdleInterval					0xffff
++#define		bOFDMService					0xffff0000
++#define		bTxMACHeader					0xffffffff
++#define		bTxDataInit						0xff
++#define		bTxHTMode						0x100
++#define		bTxDataType					0x30000
++#define		bTxRandomSeed					0xffffffff
++#define		bCCKTxPreamble					0x1
++#define		bCCKTxSFD						0xffff0000
++#define		bCCKTxSIG						0xff
++#define		bCCKTxService					0xff00
++#define		bCCKLengthExt					0x8000
++#define		bCCKTxLength					0xffff0000
++#define		bCCKTxCRC16					0xffff
++#define		bCCKTxStatus					0x1
++#define		bOFDMTxStatus					0x2
++
++#define 		IS_BB_REG_OFFSET_92S(_Offset)		((_Offset >= 0x800) && (_Offset <= 0xfff))
++
++// 2. Page8(0x800)
++#define		bRFMOD							0x1	// Reg 0x800 rFPGA0_RFMOD
++#define		bJapanMode						0x2
++#define		bCCKTxSC						0x30
++#define		bCCKEn							0x1000000
++#define		bOFDMEn						0x2000000
++
++#define		bOFDMRxADCPhase           		0x10000	// Useless now
++#define		bOFDMTxDACPhase           		0x40000
++#define		bXATxAGC                  			0x3f
++
++#define		bAntennaSelect                 		0x0300
++
++#define		bXBTxAGC                  			0xf00	// Reg 80c rFPGA0_TxGainStage
++#define		bXCTxAGC                  			0xf000
++#define		bXDTxAGC                  			0xf0000
++       		
++#define		bPAStart                  			0xf0000000	// Useless now
++#define		bTRStart                  			0x00f00000
++#define		bRFStart                  			0x0000f000
++#define		bBBStart                  			0x000000f0
++#define		bBBCCKStart               		0x0000000f
++#define		bPAEnd                    			0xf          //Reg0x814
++#define		bTREnd                    			0x0f000000
++#define		bRFEnd                    			0x000f0000
++#define		bCCAMask                  			0x000000f0   //T2R
++#define		bR2RCCAMask               		0x00000f00
++#define		bHSSI_R2TDelay            		0xf8000000
++#define		bHSSI_T2RDelay            		0xf80000
++#define		bContTxHSSI               		0x400     //chane gain at continue Tx
++#define		bIGFromCCK                		0x200
++#define		bAGCAddress               		0x3f
++#define		bRxHPTx                   			0x7000
++#define		bRxHPT2R                  			0x38000
++#define		bRxHPCCKIni               		0xc0000
++#define		bAGCTxCode                		0xc00000
++#define		bAGCRxCode                		0x300000
++
++#define		b3WireDataLength          		0x800	// Reg 0x820~84f rFPGA0_XA_HSSIParameter1
++#define		b3WireAddressLength       		0x400
++
++#define		b3WireRFPowerDown         		0x1	// Useless now
++//#define bHWSISelect               		0x8
++#define		b5GPAPEPolarity           		0x40000000
++#define		b2GPAPEPolarity           		0x80000000
++#define		bRFSW_TxDefaultAnt        		0x3
++#define		bRFSW_TxOptionAnt         		0x30
++#define		bRFSW_RxDefaultAnt        		0x300
++#define		bRFSW_RxOptionAnt         		0x3000
++#define		bRFSI_3WireData           		0x1
++#define		bRFSI_3WireClock          		0x2
++#define		bRFSI_3WireLoad           		0x4
++#define		bRFSI_3WireRW             		0x8
++#define		bRFSI_3Wire               			0xf
++
++#define		bRFSI_RFENV               		0x10	// Reg 0x870 rFPGA0_XAB_RFInterfaceSW
++
++#define		bRFSI_TRSW                		0x20	// Useless now
++#define		bRFSI_TRSWB               		0x40
++#define		bRFSI_ANTSW               		0x100
++#define		bRFSI_ANTSWB              		0x200
++#define		bRFSI_PAPE                			0x400
++#define		bRFSI_PAPE5G              		0x800 
++#define		bBandSelect               			0x1
++#define		bHTSIG2_GI                			0x80
++#define		bHTSIG2_Smoothing         		0x01
++#define		bHTSIG2_Sounding          		0x02
++#define		bHTSIG2_Aggreaton         		0x08
++#define		bHTSIG2_STBC              		0x30
++#define		bHTSIG2_AdvCoding         		0x40
++#define		bHTSIG2_NumOfHTLTF        	0x300
++#define		bHTSIG2_CRC8              		0x3fc
++#define		bHTSIG1_MCS               		0x7f
++#define		bHTSIG1_BandWidth         		0x80
++#define		bHTSIG1_HTLength          		0xffff
++#define		bLSIG_Rate                			0xf
++#define		bLSIG_Reserved            		0x10
++#define		bLSIG_Length              		0x1fffe
++#define		bLSIG_Parity              			0x20
++#define		bCCKRxPhase               		0x4
++
++#define		bLSSIReadAddress          		0x7f800000   // T65 RF
++
++#define		bLSSIReadEdge             		0x80000000   //LSSI "Read" edge signal
++
++#define		bLSSIReadBackData         		0xfffff		// T65 RF
++
++#define		bLSSIReadOKFlag           		0x1000	// Useless now
++#define		bCCKSampleRate            		0x8       //0: 44MHz, 1:88MHz       		
++#define		bRegulator0Standby        		0x1
++#define		bRegulatorPLLStandby      		0x2
++#define		bRegulator1Standby        		0x4
++#define		bPLLPowerUp               		0x8
++#define		bDPLLPowerUp              		0x10
++#define		bDA10PowerUp              		0x20
++#define		bAD7PowerUp               		0x200
++#define		bDA6PowerUp               		0x2000
++#define		bXtalPowerUp              		0x4000
++#define		b40MDClkPowerUP           		0x8000
++#define		bDA6DebugMode             		0x20000
++#define		bDA6Swing                 			0x380000
++
++#define		bADClkPhase               		0x4000000	// Reg 0x880 rFPGA0_AnalogParameter1 20/40 CCK support switch 40/80 BB MHZ
++
++#define		b80MClkDelay              		0x18000000	// Useless
++#define		bAFEWatchDogEnable        		0x20000000
++
++#define		bXtalCap01                			0xc0000000	// Reg 0x884 rFPGA0_AnalogParameter2 Crystal cap
++#define		bXtalCap23                			0x3
++#define		bXtalCap92x					0x0f000000
++#define 		bXtalCap                			0x0f000000
++
++#define		bIntDifClkEnable          		0x400	// Useless
++#define		bExtSigClkEnable         	 	0x800
++#define		bBandgapMbiasPowerUp      	0x10000
++#define		bAD11SHGain               		0xc0000
++#define		bAD11InputRange           		0x700000
++#define		bAD11OPCurrent            		0x3800000
++#define		bIPathLoopback            		0x4000000
++#define		bQPathLoopback            		0x8000000
++#define		bAFELoopback              		0x10000000
++#define		bDA10Swing                		0x7e0
++#define		bDA10Reverse              		0x800
++#define		bDAClkSource              		0x1000
++#define		bAD7InputRange            		0x6000
++#define		bAD7Gain                  			0x38000
++#define		bAD7OutputCMMode          		0x40000
++#define		bAD7InputCMMode           		0x380000
++#define		bAD7Current               			0xc00000
++#define		bRegulatorAdjust          		0x7000000
++#define		bAD11PowerUpAtTx          		0x1
++#define		bDA10PSAtTx               		0x10
++#define		bAD11PowerUpAtRx          		0x100
++#define		bDA10PSAtRx               		0x1000       		
++#define		bCCKRxAGCFormat           		0x200       		
++#define		bPSDFFTSamplepPoint       		0xc000
++#define		bPSDAverageNum            		0x3000
++#define		bIQPathControl            		0xc00
++#define		bPSDFreq                  			0x3ff
++#define		bPSDAntennaPath           		0x30
++#define		bPSDIQSwitch              		0x40
++#define		bPSDRxTrigger             		0x400000
++#define		bPSDTxTrigger             		0x80000000
++#define		bPSDSineToneScale        		0x7f000000
++#define		bPSDReport                			0xffff
++
++// 3. Page9(0x900)
++#define		bOFDMTxSC                 		0x30000000	// Useless
++#define		bCCKTxOn                  			0x1
++#define		bOFDMTxOn                 		0x2
++#define		bDebugPage                		0xfff  //reset debug page and also HWord, LWord
++#define		bDebugItem                		0xff   //reset debug page and LWord
++#define		bAntL              	       		0x10
++#define		bAntNonHT           	      			0x100
++#define		bAntHT1               			0x1000
++#define		bAntHT2                   			0x10000
++#define		bAntHT1S1                 			0x100000
++#define		bAntNonHTS1               		0x1000000
++
++// 4. PageA(0xA00)
++#define		bCCKBBMode				0x3	// Useless
++#define		bCCKTxPowerSaving		0x80
++#define		bCCKRxPowerSaving		0x40
++
++#define		bCCKSideBand			0x10	// Reg 0xa00 rCCK0_System 20/40 switch
++
++#define		bCCKScramble			0x8	// Useless
++#define		bCCKAntDiversity		0x8000
++#define		bCCKCarrierRecovery		0x4000
++#define		bCCKTxRate				0x3000
++#define		bCCKDCCancel			0x0800
++#define		bCCKISICancel			0x0400
++#define		bCCKMatchFilter			0x0200
++#define		bCCKEqualizer			0x0100
++#define		bCCKPreambleDetect		0x800000
++#define		bCCKFastFalseCCA		0x400000
++#define		bCCKChEstStart			0x300000
++#define		bCCKCCACount			0x080000
++#define		bCCKcs_lim				0x070000
++#define		bCCKBistMode			0x80000000
++#define		bCCKCCAMask			0x40000000
++#define		bCCKTxDACPhase		0x4
++#define		bCCKRxADCPhase		0x20000000   //r_rx_clk
++#define		bCCKr_cp_mode0		0x0100
++#define		bCCKTxDCOffset			0xf0
++#define		bCCKRxDCOffset			0xf
++#define		bCCKCCAMode			0xc000
++#define		bCCKFalseCS_lim			0x3f00
++#define		bCCKCS_ratio			0xc00000
++#define		bCCKCorgBit_sel			0x300000
++#define		bCCKPD_lim				0x0f0000
++#define		bCCKNewCCA			0x80000000
++#define		bCCKRxHPofIG			0x8000
++#define		bCCKRxIG				0x7f00
++#define		bCCKLNAPolarity			0x800000
++#define		bCCKRx1stGain			0x7f0000
++#define		bCCKRFExtend			0x20000000 //CCK Rx Iinital gain polarity
++#define		bCCKRxAGCSatLevel		0x1f000000
++#define		bCCKRxAGCSatCount		0xe0
++#define		bCCKRxRFSettle			0x1f       //AGCsamp_dly
++#define		bCCKFixedRxAGC			0x8000
++//#define bCCKRxAGCFormat         	 	0x4000   //remove to HSSI register 0x824
++#define		bCCKAntennaPolarity		0x2000
++#define		bCCKTxFilterType		0x0c00
++#define		bCCKRxAGCReportType	0x0300
++#define		bCCKRxDAGCEn			0x80000000
++#define		bCCKRxDAGCPeriod		0x20000000
++#define		bCCKRxDAGCSatLevel		0x1f000000
++#define		bCCKTimingRecovery		0x800000
++#define		bCCKTxC0				0x3f0000
++#define		bCCKTxC1				0x3f000000
++#define		bCCKTxC2				0x3f
++#define		bCCKTxC3				0x3f00
++#define		bCCKTxC4				0x3f0000
++#define		bCCKTxC5				0x3f000000
++#define		bCCKTxC6				0x3f
++#define		bCCKTxC7				0x3f00
++#define		bCCKDebugPort			0xff0000
++#define		bCCKDACDebug			0x0f000000
++#define		bCCKFalseAlarmEnable	0x8000
++#define		bCCKFalseAlarmRead		0x4000
++#define		bCCKTRSSI				0x7f
++#define		bCCKRxAGCReport		0xfe
++#define		bCCKRxReport_AntSel	0x80000000
++#define		bCCKRxReport_MFOff		0x40000000
++#define		bCCKRxRxReport_SQLoss	0x20000000
++#define		bCCKRxReport_Pktloss	0x10000000
++#define		bCCKRxReport_Lockedbit	0x08000000
++#define		bCCKRxReport_RateError	0x04000000
++#define		bCCKRxReport_RxRate	0x03000000
++#define		bCCKRxFACounterLower	0xff
++#define		bCCKRxFACounterUpper	0xff000000
++#define		bCCKRxHPAGCStart		0xe000
++#define		bCCKRxHPAGCFinal		0x1c00       		
++#define		bCCKRxFalseAlarmEnable	0x8000
++#define		bCCKFACounterFreeze	0x4000       		
++#define		bCCKTxPathSel			0x10000000
++#define		bCCKDefaultRxPath		0xc000000
++#define		bCCKOptionRxPath		0x3000000
++
++// 5. PageC(0xC00)
++#define		bNumOfSTF				0x3	// Useless
++#define		bShift_L					0xc0
++#define		bGI_TH					0xc
++#define		bRxPathA				0x1
++#define		bRxPathB				0x2
++#define		bRxPathC				0x4
++#define		bRxPathD				0x8
++#define		bTxPathA				0x1
++#define		bTxPathB				0x2
++#define		bTxPathC				0x4
++#define		bTxPathD				0x8
++#define		bTRSSIFreq				0x200
++#define		bADCBackoff				0x3000
++#define		bDFIRBackoff			0xc000
++#define		bTRSSILatchPhase		0x10000
++#define		bRxIDCOffset			0xff
++#define		bRxQDCOffset			0xff00
++#define		bRxDFIRMode			0x1800000
++#define		bRxDCNFType			0xe000000
++#define		bRXIQImb_A				0x3ff
++#define		bRXIQImb_B				0xfc00
++#define		bRXIQImb_C				0x3f0000
++#define		bRXIQImb_D				0xffc00000
++#define		bDC_dc_Notch			0x60000
++#define		bRxNBINotch			0x1f000000
++#define		bPD_TH					0xf
++#define		bPD_TH_Opt2			0xc000
++#define		bPWED_TH				0x700
++#define		bIfMF_Win_L			0x800
++#define		bPD_Option				0x1000
++#define		bMF_Win_L				0xe000
++#define		bBW_Search_L			0x30000
++#define		bwin_enh_L				0xc0000
++#define		bBW_TH					0x700000
++#define		bED_TH2				0x3800000
++#define		bBW_option				0x4000000
++#define		bRatio_TH				0x18000000
++#define		bWindow_L				0xe0000000
++#define		bSBD_Option				0x1
++#define		bFrame_TH				0x1c
++#define		bFS_Option				0x60
++#define		bDC_Slope_check		0x80
++#define		bFGuard_Counter_DC_L	0xe00
++#define		bFrame_Weight_Short	0x7000
++#define		bSub_Tune				0xe00000
++#define		bFrame_DC_Length		0xe000000
++#define		bSBD_start_offset		0x30000000
++#define		bFrame_TH_2			0x7
++#define		bFrame_GI2_TH			0x38
++#define		bGI2_Sync_en			0x40
++#define		bSarch_Short_Early		0x300
++#define		bSarch_Short_Late		0xc00
++#define		bSarch_GI2_Late		0x70000
++#define		bCFOAntSum				0x1
++#define		bCFOAcc				0x2
++#define		bCFOStartOffset			0xc
++#define		bCFOLookBack			0x70
++#define		bCFOSumWeight			0x80
++#define		bDAGCEnable			0x10000
++#define		bTXIQImb_A				0x3ff
++#define		bTXIQImb_B				0xfc00
++#define		bTXIQImb_C				0x3f0000
++#define		bTXIQImb_D				0xffc00000
++#define		bTxIDCOffset			0xff
++#define		bTxQDCOffset			0xff00
++#define		bTxDFIRMode			0x10000
++#define		bTxPesudoNoiseOn		0x4000000
++#define		bTxPesudoNoise_A		0xff
++#define		bTxPesudoNoise_B		0xff00
++#define		bTxPesudoNoise_C		0xff0000
++#define		bTxPesudoNoise_D		0xff000000
++#define		bCCADropOption			0x20000
++#define		bCCADropThres			0xfff00000
++#define		bEDCCA_H				0xf
++#define		bEDCCA_L				0xf0
++#define		bLambda_ED			0x300
++#define		bRxInitialGain			0x7f
++#define		bRxAntDivEn				0x80
++#define		bRxAGCAddressForLNA	0x7f00
++#define		bRxHighPowerFlow		0x8000
++#define		bRxAGCFreezeThres		0xc0000
++#define		bRxFreezeStep_AGC1	0x300000
++#define		bRxFreezeStep_AGC2	0xc00000
++#define		bRxFreezeStep_AGC3	0x3000000
++#define		bRxFreezeStep_AGC0	0xc000000
++#define		bRxRssi_Cmp_En			0x10000000
++#define		bRxQuickAGCEn			0x20000000
++#define		bRxAGCFreezeThresMode	0x40000000
++#define		bRxOverFlowCheckType	0x80000000
++#define		bRxAGCShift				0x7f
++#define		bTRSW_Tri_Only			0x80
++#define		bPowerThres			0x300
++#define		bRxAGCEn				0x1
++#define		bRxAGCTogetherEn		0x2
++#define		bRxAGCMin				0x4
++#define		bRxHP_Ini				0x7
++#define		bRxHP_TRLNA			0x70
++#define		bRxHP_RSSI				0x700
++#define		bRxHP_BBP1				0x7000
++#define		bRxHP_BBP2				0x70000
++#define		bRxHP_BBP3				0x700000
++#define		bRSSI_H					0x7f0000     //the threshold for high power
++#define		bRSSI_Gen				0x7f000000   //the threshold for ant diversity
++#define		bRxSettle_TRSW			0x7
++#define		bRxSettle_LNA			0x38
++#define		bRxSettle_RSSI			0x1c0
++#define		bRxSettle_BBP			0xe00
++#define		bRxSettle_RxHP			0x7000
++#define		bRxSettle_AntSW_RSSI	0x38000
++#define		bRxSettle_AntSW		0xc0000
++#define		bRxProcessTime_DAGC	0x300000
++#define		bRxSettle_HSSI			0x400000
++#define		bRxProcessTime_BBPPW	0x800000
++#define		bRxAntennaPowerShift	0x3000000
++#define		bRSSITableSelect		0xc000000
++#define		bRxHP_Final				0x7000000
++#define		bRxHTSettle_BBP			0x7
++#define		bRxHTSettle_HSSI		0x8
++#define		bRxHTSettle_RxHP		0x70
++#define		bRxHTSettle_BBPPW		0x80
++#define		bRxHTSettle_Idle		0x300
++#define		bRxHTSettle_Reserved	0x1c00
++#define		bRxHTRxHPEn			0x8000
++#define		bRxHTAGCFreezeThres	0x30000
++#define		bRxHTAGCTogetherEn	0x40000
++#define		bRxHTAGCMin			0x80000
++#define		bRxHTAGCEn				0x100000
++#define		bRxHTDAGCEn			0x200000
++#define		bRxHTRxHP_BBP			0x1c00000
++#define		bRxHTRxHP_Final		0xe0000000
++#define		bRxPWRatioTH			0x3
++#define		bRxPWRatioEn			0x4
++#define		bRxMFHold				0x3800
++#define		bRxPD_Delay_TH1		0x38
++#define		bRxPD_Delay_TH2		0x1c0
++#define		bRxPD_DC_COUNT_MAX	0x600
++//#define bRxMF_Hold               0x3800
++#define		bRxPD_Delay_TH			0x8000
++#define		bRxProcess_Delay		0xf0000
++#define		bRxSearchrange_GI2_Early	0x700000
++#define		bRxFrame_Guard_Counter_L	0x3800000
++#define		bRxSGI_Guard_L			0xc000000
++#define		bRxSGI_Search_L		0x30000000
++#define		bRxSGI_TH				0xc0000000
++#define		bDFSCnt0				0xff
++#define		bDFSCnt1				0xff00
++#define		bDFSFlag				0xf0000       		
++#define		bMFWeightSum			0x300000
++#define		bMinIdxTH				0x7f000000       		
++#define		bDAFormat				0x40000       		
++#define		bTxChEmuEnable		0x01000000       		
++#define		bTRSWIsolation_A		0x7f
++#define		bTRSWIsolation_B		0x7f00
++#define		bTRSWIsolation_C		0x7f0000
++#define		bTRSWIsolation_D		0x7f000000       		
++#define		bExtLNAGain				0x7c00          
++
++// 6. PageE(0xE00)
++#define		bSTBCEn				0x4	// Useless
++#define		bAntennaMapping		0x10
++#define		bNss					0x20
++#define		bCFOAntSumD			0x200
++#define		bPHYCounterReset		0x8000000
++#define		bCFOReportGet			0x4000000
++#define		bOFDMContinueTx		0x10000000
++#define		bOFDMSingleCarrier		0x20000000
++#define		bOFDMSingleTone		0x40000000
++//#define bRxPath1                 0x01
++//#define bRxPath2                 0x02
++//#define bRxPath3                 0x04
++//#define bRxPath4                 0x08
++//#define bTxPath1                 0x10
++//#define bTxPath2                 0x20
++#define		bHTDetect			0x100
++#define		bCFOEn				0x10000
++#define		bCFOValue			0xfff00000
++#define		bSigTone_Re		0x3f
++#define		bSigTone_Im		0x7f00
++#define		bCounter_CCA		0xffff
++#define		bCounter_ParityFail	0xffff0000
++#define		bCounter_RateIllegal		0xffff
++#define		bCounter_CRC8Fail	0xffff0000
++#define		bCounter_MCSNoSupport	0xffff
++#define		bCounter_FastSync	0xffff
++#define		bShortCFO			0xfff
++#define		bShortCFOTLength	12   //total
++#define		bShortCFOFLength	11   //fraction
++#define		bLongCFO			0x7ff
++#define		bLongCFOTLength	11
++#define		bLongCFOFLength	11
++#define		bTailCFO			0x1fff
++#define		bTailCFOTLength		13
++#define		bTailCFOFLength		12       		
++#define		bmax_en_pwdB		0xffff
++#define		bCC_power_dB		0xffff0000
++#define		bnoise_pwdB		0xffff
++#define		bPowerMeasTLength	10
++#define		bPowerMeasFLength	3
++#define		bRx_HT_BW			0x1
++#define		bRxSC				0x6
++#define		bRx_HT				0x8       		
++#define		bNB_intf_det_on		0x1
++#define		bIntf_win_len_cfg	0x30
++#define		bNB_Intf_TH_cfg		0x1c0       		
++#define		bRFGain				0x3f
++#define		bTableSel			0x40
++#define		bTRSW				0x80       		
++#define		bRxSNR_A			0xff
++#define		bRxSNR_B			0xff00
++#define		bRxSNR_C			0xff0000
++#define		bRxSNR_D			0xff000000
++#define		bSNREVMTLength		8
++#define		bSNREVMFLength		1       		
++#define		bCSI1st				0xff
++#define		bCSI2nd				0xff00
++#define		bRxEVM1st			0xff0000
++#define		bRxEVM2nd			0xff000000       		
++#define		bSIGEVM			0xff
++#define		bPWDB				0xff00
++#define		bSGIEN				0x10000
++       		
++#define		bSFactorQAM1		0xf	// Useless
++#define		bSFactorQAM2		0xf0
++#define		bSFactorQAM3		0xf00
++#define		bSFactorQAM4		0xf000
++#define		bSFactorQAM5		0xf0000
++#define		bSFactorQAM6		0xf0000
++#define		bSFactorQAM7		0xf00000
++#define		bSFactorQAM8		0xf000000
++#define		bSFactorQAM9		0xf0000000
++#define		bCSIScheme			0x100000
++       		
++#define		bNoiseLvlTopSet		0x3	// Useless
++#define		bChSmooth			0x4
++#define		bChSmoothCfg1		0x38
++#define		bChSmoothCfg2		0x1c0
++#define		bChSmoothCfg3		0xe00
++#define		bChSmoothCfg4		0x7000
++#define		bMRCMode			0x800000
++#define		bTHEVMCfg			0x7000000
++       		
++#define		bLoopFitType		0x1	// Useless
++#define		bUpdCFO			0x40
++#define		bUpdCFOOffData		0x80
++#define		bAdvUpdCFO			0x100
++#define		bAdvTimeCtrl		0x800
++#define		bUpdClko			0x1000
++#define		bFC					0x6000
++#define		bTrackingMode		0x8000
++#define		bPhCmpEnable		0x10000
++#define		bUpdClkoLTF		0x20000
++#define		bComChCFO			0x40000
++#define		bCSIEstiMode		0x80000
++#define		bAdvUpdEqz			0x100000
++#define		bUChCfg				0x7000000
++#define		bUpdEqz			0x8000000
++
++//Rx Pseduo noise
++#define		bRxPesudoNoiseOn		0x20000000	// Useless
++#define		bRxPesudoNoise_A		0xff
++#define		bRxPesudoNoise_B		0xff00
++#define		bRxPesudoNoise_C		0xff0000
++#define		bRxPesudoNoise_D		0xff000000
++#define		bPesudoNoiseState_A	0xffff
++#define		bPesudoNoiseState_B	0xffff0000
++#define		bPesudoNoiseState_C	0xffff
++#define		bPesudoNoiseState_D	0xffff0000
++
++//7. RF Register
++//Zebra1
++#define		bZebra1_HSSIEnable		0x8		// Useless
++#define		bZebra1_TRxControl		0xc00
++#define		bZebra1_TRxGainSetting	0x07f
++#define		bZebra1_RxCorner		0xc00
++#define		bZebra1_TxChargePump	0x38
++#define		bZebra1_RxChargePump	0x7
++#define		bZebra1_ChannelNum	0xf80
++#define		bZebra1_TxLPFBW		0x400
++#define		bZebra1_RxLPFBW		0x600
++
++//Zebra4
++#define		bRTL8256RegModeCtrl1	0x100	// Useless
++#define		bRTL8256RegModeCtrl0	0x40
++#define		bRTL8256_TxLPFBW		0x18
++#define		bRTL8256_RxLPFBW		0x600
++
++//RTL8258
++#define		bRTL8258_TxLPFBW		0xc	// Useless
++#define		bRTL8258_RxLPFBW		0xc00
++#define		bRTL8258_RSSILPFBW	0xc0
++
++
++//
++// Other Definition
++//
++
++//byte endable for sb_write
++#define		bByte0				0x1	// Useless
++#define		bByte1				0x2
++#define		bByte2				0x4
++#define		bByte3				0x8
++#define		bWord0				0x3
++#define		bWord1				0xc
++#define		bDWord				0xf
++
++//for PutRegsetting & GetRegSetting BitMask
++#define		bMaskByte0			0xff	// Reg 0xc50 rOFDM0_XAAGCCore~0xC6f
++#define		bMaskByte1			0xff00
++#define		bMaskByte2			0xff0000
++#define		bMaskByte3			0xff000000
++#define		bMaskHWord		0xffff0000
++#define		bMaskLWord			0x0000ffff
++#define		bMaskDWord		0xffffffff
++#define		bMask12Bits			0xfff
++#define		bMaskH4Bits			0xf0000000	
++#define		bMaskOFDM_D		0xffc00000
++#define		bMaskCCK			0x3f3f3f3f
++
++//for PutRFRegsetting & GetRFRegSetting BitMask
++//#define		bMask12Bits               0xfffff	// RF Reg mask bits
++//#define		bMask20Bits               0xfffff	// RF Reg mask bits T65 RF
++#define 		bRFRegOffsetMask	0xfffff		
++  		
++#define		bEnable			0x1	// Useless
++#define		bDisable		0x0
++       		
++#define		LeftAntenna		0x0	// Useless
++#define		RightAntenna	0x1
++       		
++#define		tCheckTxStatus		500   //500ms // Useless
++#define		tUpdateRxCounter	100   //100ms
++       		
++#define		rateCCK		0	// Useless
++#define		rateOFDM	1
++#define		rateHT		2
++
++//define Register-End
++#define		bPMAC_End			0x1ff	// Useless
++#define		bFPGAPHY0_End		0x8ff
++#define		bFPGAPHY1_End		0x9ff
++#define		bCCKPHY0_End		0xaff
++#define		bOFDMPHY0_End		0xcff
++#define		bOFDMPHY1_End		0xdff
++
++//define max debug item in each debug page
++//#define bMaxItem_FPGA_PHY0        0x9
++//#define bMaxItem_FPGA_PHY1        0x3
++//#define bMaxItem_PHY_11B          0x16
++//#define bMaxItem_OFDM_PHY0        0x29
++//#define bMaxItem_OFDM_PHY1        0x0
++
++#define		bPMACControl		0x0		// Useless
++#define		bWMACControl		0x1
++#define		bWNICControl		0x2
++       		
++#define		PathA			0x0	// Useless
++#define		PathB			0x1
++#define		PathC			0x2
++#define		PathD			0x3
++
++/*--------------------------Define Parameters-------------------------------*/
++
++
++#endif	//__INC_HAL8192SPHYREG_H
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/Hal8192CUHWImg.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/Hal8192CUHWImg.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/Hal8192CUHWImg.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/Hal8192CUHWImg.h	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,105 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __INC_HAL8192CU_FW_IMG_H
++#define __INC_HAL8192CU_FW_IMG_H
++
++/*Created on  2011/ 6/15,  5:45*/
++
++#ifdef CONFIG_BT_COEXISTENCE
++#define TSMCImgArrayLength 15706 //v84 TSMC COMMON 2012-04-13
++#else //#ifdef CONFIG_P2P
++#define TSMCImgArrayLength 16126 //v88 TSMC P2PPS with CCX report C2H 2012-12-05
++#endif
++extern u8 Rtl8192CUFwTSMCImgArray[TSMCImgArrayLength];
++
++#ifdef CONFIG_BT_COEXISTENCE
++#define UMCACutImgArrayLength 16248 //v79 UMC A Cut COMMON 2011-10-06
++#else //#ifdef CONFIG_P2P
++#define UMCACutImgArrayLength 16126 //v88 UMC A Cut P2PPS with CCX report C2H 2012-12-05
++#endif
++extern u8 Rtl8192CUFwUMCACutImgArray[UMCACutImgArrayLength];
++
++#ifdef CONFIG_BT_COEXISTENCE
++#define UMCBCutImgArrayLength 15686 //v84 UMC B Cut COMMON 2012-04-13
++#else //#ifdef CONFIG_P2P
++#define UMCBCutImgArrayLength 16096 //v88 UMC B Cut P2PPS with CCX report C2H 2012-12-05
++#endif
++extern u8 Rtl8192CUFwUMCBCutImgArray[UMCBCutImgArrayLength];
++
++//8188C_Formal_All_PHYforMP_111117	2011-11-23
++//8192C_Formal_92CU_PHYforMP_110817 	2011-11-23
++#define PHY_REG_2TArrayLength 374
++extern u32  Rtl8192CUPHY_REG_2TArray[PHY_REG_2TArrayLength];
++#define PHY_REG_1TArrayLength 374
++extern u32 Rtl8192CUPHY_REG_1TArray[PHY_REG_1TArrayLength];
++#define PHY_ChangeTo_1T1RArrayLength 1
++extern u32 Rtl8192CUPHY_ChangeTo_1T1RArray[PHY_ChangeTo_1T1RArrayLength];
++#define PHY_ChangeTo_1T2RArrayLength 1
++extern u32 Rtl8192CUPHY_ChangeTo_1T2RArray[PHY_ChangeTo_1T2RArrayLength];
++#define PHY_ChangeTo_2T2RArrayLength 1
++extern u32 Rtl8192CUPHY_ChangeTo_2T2RArray[PHY_ChangeTo_2T2RArrayLength];
++#define PHY_REG_Array_PGLength 336
++extern u32 Rtl8192CUPHY_REG_Array_PG[PHY_REG_Array_PGLength];
++#define PHY_REG_Array_PG_mCardLength 336
++extern u32 Rtl8192CUPHY_REG_Array_PG_mCard[PHY_REG_Array_PG_mCardLength];
++#define PHY_REG_Array_MPLength 4
++extern u32 Rtl8192CUPHY_REG_Array_MP[PHY_REG_Array_MPLength];
++#define PHY_REG_1T_HPArrayLength 378
++extern u32 Rtl8192CUPHY_REG_1T_HPArray[PHY_REG_1T_HPArrayLength];
++#define PHY_REG_1T_mCardArrayLength 374
++extern u32 Rtl8192CUPHY_REG_1T_mCardArray[PHY_REG_1T_mCardArrayLength];
++#define PHY_REG_2T_mCardArrayLength 374
++extern u32 Rtl8192CUPHY_REG_2T_mCardArray[PHY_REG_2T_mCardArrayLength];
++#define PHY_REG_Array_PG_HPLength 336
++extern u32 Rtl8192CUPHY_REG_Array_PG_HP[PHY_REG_Array_PG_HPLength];
++#define RadioA_2TArrayLength 282
++extern u32 Rtl8192CURadioA_2TArray[RadioA_2TArrayLength];
++#define RadioB_2TArrayLength 78
++extern u32 Rtl8192CURadioB_2TArray[RadioB_2TArrayLength];
++#define RadioA_1TArrayLength 282
++extern u32 Rtl8192CURadioA_1TArray[RadioA_1TArrayLength];
++#define RadioB_1TArrayLength 1
++extern u32 Rtl8192CURadioB_1TArray[RadioB_1TArrayLength];
++#define RadioA_2T_mCardArrayLength 282
++extern u32 Rtl8192CURadioA_2T_mCardArray[RadioA_2T_mCardArrayLength];
++#define RadioB_2T_mCardArrayLength 78
++extern u32 Rtl8192CURadioB_2T_mCardArray[RadioB_2T_mCardArrayLength];
++#define RadioA_1T_mCardArrayLength 282
++extern u32 Rtl8192CURadioA_1T_mCardArray[RadioA_1T_mCardArrayLength];
++#define RadioB_1T_mCardArrayLength 1
++extern u32 Rtl8192CURadioB_1T_mCardArray[RadioB_1T_mCardArrayLength];
++#define RadioA_1T_HPArrayLength 282
++extern u32 Rtl8192CURadioA_1T_HPArray[RadioA_1T_HPArrayLength];
++#define RadioB_GM_ArrayLength 1
++extern u32 Rtl8192CURadioB_GM_Array[RadioB_GM_ArrayLength];
++
++// MAC reg V14 - 2011-11-23
++#define MAC_2T_ArrayLength 174
++extern u32 Rtl8192CUMAC_2T_Array[MAC_2T_ArrayLength];
++#define MACPHY_Array_PGLength 1
++extern u32 Rtl8192CUMACPHY_Array_PG[MACPHY_Array_PGLength];
++#define AGCTAB_2TArrayLength 320
++extern u32 Rtl8192CUAGCTAB_2TArray[AGCTAB_2TArrayLength];
++#define AGCTAB_1TArrayLength 320
++extern u32 Rtl8192CUAGCTAB_1TArray[AGCTAB_1TArrayLength];
++#define AGCTAB_1T_HPArrayLength 320
++extern u32 Rtl8192CUAGCTAB_1T_HPArray[AGCTAB_1T_HPArrayLength];
++
++#endif //__INC_HAL8192CU_FW_IMG_H
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/Hal8192CUHWImg_wowlan.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/Hal8192CUHWImg_wowlan.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/Hal8192CUHWImg_wowlan.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/Hal8192CUHWImg_wowlan.h	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,34 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __INC_HAL8192CU_FW_IMG_WOWLAN_H
++#define __INC_HAL8192CU_FW_IMG_WOWLAN_H
++
++/*Created on  2011/11/ 8, 14:15*/
++
++
++#define TSMCWWImgArrayLength 13458
++extern u8 Rtl8192CUFwTSMCWWImgArray[TSMCWWImgArrayLength];
++#define UMCACutWWImgArrayLength 13458
++extern u8 Rtl8192CUFwUMCACutWWImgArray[UMCACutWWImgArrayLength];
++#define UMCBCutWWImgArrayLength 13446
++extern u8 Rtl8192CUFwUMCBCutWWImgArray[UMCBCutWWImgArrayLength];
++
++#endif //__INC_HAL8192CU_FW_IMG_WOWLAN_H
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/Hal8192DEHWImg.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/Hal8192DEHWImg.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/Hal8192DEHWImg.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/Hal8192DEHWImg.h	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,66 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __INC_HAL8192DE_FW_IMG_H
++#define __INC_HAL8192DE_FW_IMG_H
++
++#include <basic_types.h>
++
++/*Created on  2011/11/11,  8: 8*/
++
++#define Rtl8192DEImgArrayLength 32296
++extern const u8 Rtl8192DEFwImgArray[Rtl8192DEImgArrayLength];
++#define Rtl8192DEMainArrayLength 1
++extern const u8 Rtl8192DEFwMainArray[Rtl8192DEMainArrayLength];
++#define Rtl8192DEDataArrayLength 1
++extern const u8 Rtl8192DEFwDataArray[Rtl8192DEDataArrayLength];
++#define Rtl8192DEPHY_REG_2TArrayLength 372
++extern const u32 Rtl8192DEPHY_REG_2TArray[Rtl8192DEPHY_REG_2TArrayLength];
++#define Rtl8192DEPHY_REG_1TArrayLength 1
++extern const u32 Rtl8192DEPHY_REG_1TArray[Rtl8192DEPHY_REG_1TArrayLength];
++#define Rtl8192DEPHY_REG_Array_PGLength 624
++extern const u32 Rtl8192DEPHY_REG_Array_PG[Rtl8192DEPHY_REG_Array_PGLength];
++#define Rtl8192DEPHY_REG_Array_MPLength 12
++extern const u32 Rtl8192DEPHY_REG_Array_MP[Rtl8192DEPHY_REG_Array_MPLength];
++#define Rtl8192DERadioA_2TArrayLength 378
++extern const u32 Rtl8192DERadioA_2TArray[Rtl8192DERadioA_2TArrayLength];
++#define Rtl8192DERadioB_2TArrayLength 384
++extern const u32 Rtl8192DERadioB_2TArray[Rtl8192DERadioB_2TArrayLength];
++#define Rtl8192DERadioA_1TArrayLength 1
++extern const u32 Rtl8192DERadioA_1TArray[Rtl8192DERadioA_1TArrayLength];
++#define Rtl8192DERadioB_1TArrayLength 1
++extern const u32 Rtl8192DERadioB_1TArray[Rtl8192DERadioB_1TArrayLength];
++#define Rtl8192DERadioA_2T_intPAArrayLength 378
++extern const u32 Rtl8192DERadioA_2T_intPAArray[Rtl8192DERadioA_2T_intPAArrayLength];
++#define Rtl8192DERadioB_2T_intPAArrayLength 384
++extern const u32 Rtl8192DERadioB_2T_intPAArray[Rtl8192DERadioB_2T_intPAArrayLength];
++#define Rtl8192DEMAC_2T_ArrayLength 192
++extern const u32 Rtl8192DEMAC_2T_Array[Rtl8192DEMAC_2T_ArrayLength];
++#define Rtl8192DEAGCTAB_ArrayLength 386
++extern const u32 Rtl8192DEAGCTAB_Array[Rtl8192DEAGCTAB_ArrayLength];
++#define Rtl8192DEAGCTAB_5GArrayLength 194
++extern const u32 Rtl8192DEAGCTAB_5GArray[Rtl8192DEAGCTAB_5GArrayLength];
++#define Rtl8192DEAGCTAB_2GArrayLength 194
++extern const u32 Rtl8192DEAGCTAB_2GArray[Rtl8192DEAGCTAB_2GArrayLength];
++#define Rtl8192DEAGCTAB_2TArrayLength 1
++extern const u32 Rtl8192DEAGCTAB_2TArray[Rtl8192DEAGCTAB_2TArrayLength];
++#define Rtl8192DEAGCTAB_1TArrayLength 1
++extern const u32 Rtl8192DEAGCTAB_1TArray[Rtl8192DEAGCTAB_1TArrayLength];
++
++#endif //__INC_HAL8192CU_FW_IMG_H
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/Hal8192DPhyCfg.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/Hal8192DPhyCfg.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/Hal8192DPhyCfg.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/Hal8192DPhyCfg.h	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,528 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++/*****************************************************************************
++ *
++ * Module:	__INC_HAL8192DPHYCFG_H
++ *
++ *
++ * Note:	
++ *			
++ *
++ * Export:	Constants, macro, functions(API), global variables(None).
++ *
++ * Abbrev:	
++ *
++ * History:
++ *		Data		Who		Remark 
++ *      08/07/2007  MHC    	1. Porting from 9x series PHYCFG.h.
++ *							2. Reorganize code architecture.
++ * 
++ *****************************************************************************/
++ /* Check to see if the file has been included already.  */
++#ifndef __INC_HAL8192DPHYCFG_H
++#define __INC_HAL8192DPHYCFG_H
++
++
++/*--------------------------Define Parameters-------------------------------*/
++#define LOOP_LIMIT				5
++#define MAX_STALL_TIME			50		//us
++#define AntennaDiversityValue	0x80	//(Adapter->bSoftwareAntennaDiversity ? 0x00:0x80)
++#define MAX_TXPWR_IDX_NMODE_92S	63
++#define Reset_Cnt_Limit			3
++
++
++#define IQK_MAC_REG_NUM		4
++#define IQK_ADDA_REG_NUM		16
++#define IQK_BB_REG_NUM			10
++#define IQK_BB_REG_NUM_92C	9
++#define IQK_BB_REG_NUM_92D	10
++#define IQK_BB_REG_NUM_test	6
++#define index_mapping_NUM		13
++#define Rx_index_mapping_NUM	15
++#define AVG_THERMAL_NUM		8
++#define IQK_Matrix_REG_NUM	8
++#define IQK_Matrix_Settings_NUM	1+24+21
++
++#ifdef CONFIG_PCI_HCI
++#define	SET_RTL8192SE_RF_SLEEP(_pAdapter)							\
++{																	\
++	u1Byte		u1bTmp;												\
++	u1bTmp = PlatformEFIORead1Byte(_pAdapter, REG_LDOV12D_CTRL);		\
++	u1bTmp |= BIT0;													\
++	PlatformEFIOWrite1Byte(_pAdapter, REG_LDOV12D_CTRL, u1bTmp);		\
++	PlatformEFIOWrite1Byte(_pAdapter, REG_SPS_OCP_CFG, 0x0);				\
++	PlatformEFIOWrite1Byte(_pAdapter, TXPAUSE, 0xFF);				\
++	PlatformEFIOWrite2Byte(_pAdapter, CMDR, 0x57FC);				\
++	delay_us(100);													\
++	PlatformEFIOWrite2Byte(_pAdapter, CMDR, 0x77FC);				\
++	PlatformEFIOWrite1Byte(_pAdapter, PHY_CCA, 0x0);				\
++	delay_us(10);													\
++	PlatformEFIOWrite2Byte(_pAdapter, CMDR, 0x37FC);				\
++	delay_us(10);													\
++	PlatformEFIOWrite2Byte(_pAdapter, CMDR, 0x77FC);				\
++	delay_us(10);													\
++	PlatformEFIOWrite2Byte(_pAdapter, CMDR, 0x57FC);				\
++}
++#endif
++
++
++/*--------------------------Define Parameters-------------------------------*/
++
++
++/*------------------------------Define structure----------------------------*/ 
++typedef enum _SwChnlCmdID{
++	CmdID_End,
++	CmdID_SetTxPowerLevel,
++	CmdID_BBRegWrite10,
++	CmdID_WritePortUlong,
++	CmdID_WritePortUshort,
++	CmdID_WritePortUchar,
++	CmdID_RF_WriteReg,
++}SwChnlCmdID;
++
++
++/* 1. Switch channel related */
++typedef struct _SwChnlCmd{
++	SwChnlCmdID	CmdID;
++	u32			Para1;
++	u32			Para2;
++	u32			msDelay;
++}SwChnlCmd;
++
++typedef enum _HW90_BLOCK{
++	HW90_BLOCK_MAC = 0,
++	HW90_BLOCK_PHY0 = 1,
++	HW90_BLOCK_PHY1 = 2,
++	HW90_BLOCK_RF = 3,
++	HW90_BLOCK_MAXIMUM = 4, // Never use this
++}HW90_BLOCK_E, *PHW90_BLOCK_E;
++
++//vivi added this for read parameter from header, 20100908
++typedef enum _RF_CONTENT{
++	radioa_txt = 0x1000,
++	radiob_txt = 0x1001,
++	radioc_txt = 0x1002,
++	radiod_txt = 0x1003
++} RF_CONTENT;
++
++#define	RF_PATH_MAX			2
++
++typedef enum _WIRELESS_MODE {
++	WIRELESS_MODE_UNKNOWN = 0x00,
++	WIRELESS_MODE_A = 0x01,
++	WIRELESS_MODE_B = 0x02,
++	WIRELESS_MODE_G = 0x04,
++	WIRELESS_MODE_AUTO = 0x08,
++	WIRELESS_MODE_N_24G = 0x10,
++	WIRELESS_MODE_N_5G = 0x20
++} WIRELESS_MODE;
++
++
++#define CHANNEL_MAX_NUMBER		14+24+21	// 14 is the max channel number
++#define CHANNEL_GROUP_MAX		3+9	// ch1~3, ch4~9, ch10~14 total three groups
++#define MAX_PG_GROUP 13
++
++#define	CHANNEL_GROUP_MAX_2G		3
++#define	CHANNEL_GROUP_IDX_5GL		3
++#define	CHANNEL_GROUP_IDX_5GM		6
++#define	CHANNEL_GROUP_IDX_5GH		9
++#define	CHANNEL_GROUP_MAX_5G		9
++#define	CHANNEL_MAX_NUMBER_2G		14
++
++typedef enum _BaseBand_Config_Type{
++	BaseBand_Config_PHY_REG = 0,			//Radio Path A
++	BaseBand_Config_AGC_TAB = 1,			//Radio Path B
++}BaseBand_Config_Type, *PBaseBand_Config_Type;
++
++typedef enum _MACPHY_MODE_8192D{
++	SINGLEMAC_SINGLEPHY,
++	DUALMAC_DUALPHY,
++	DUALMAC_SINGLEPHY,
++}MACPHY_MODE_8192D,*PMACPHY_MODE_8192D;
++
++typedef enum _MACPHY_MODE_CHANGE_ACTION{
++	DMDP2DMSP = 0,
++	DMSP2DMDP = 1,
++	DMDP2SMSP = 2,
++	SMSP2DMDP = 3,
++	DMSP2SMSP = 4,
++	SMSP2DMSP = 5,
++	MAXACTION
++}MACPHY_MODE_CHANGE_ACTION,*PMACPHY_MODE_CHANGE_ACTION;
++
++typedef enum _BAND_TYPE{
++	BAND_ON_2_4G = 0,
++	BAND_ON_5G,
++	BAND_ON_BOTH,
++	BANDMAX
++}BAND_TYPE,*PBAND_TYPE;
++
++typedef enum _PHY_Rate_Tx_Power_Offset_Area{
++	RA_OFFSET_LEGACY_OFDM1,
++	RA_OFFSET_LEGACY_OFDM2,
++	RA_OFFSET_HT_OFDM1,
++	RA_OFFSET_HT_OFDM2,
++	RA_OFFSET_HT_OFDM3,
++	RA_OFFSET_HT_OFDM4,
++	RA_OFFSET_HT_CCK,
++}RA_OFFSET_AREA,*PRA_OFFSET_AREA;
++
++
++/* BB/RF related */
++typedef	enum _RF_TYPE_8190P{
++	RF_TYPE_MIN,	// 0
++	RF_8225=1,			// 1 11b/g RF for verification only
++	RF_8256=2,			// 2 11b/g/n 
++	RF_8258=3,			// 3 11a/b/g/n RF
++	RF_6052=4,		// 4 11b/g/n RF
++	//RF_6052=5,		// 4 11b/g/n RF
++	// TODO: We sholud remove this psudo PHY RF after we get new RF.
++	RF_PSEUDO_11N=5,	// 5, It is a temporality RF. 
++}RF_TYPE_8190P_E,*PRF_TYPE_8190P_E;
++
++typedef struct _BB_REGISTER_DEFINITION{
++	u32 rfintfs;			// set software control: 
++							//		0x870~0x877[8 bytes]
++							
++	u32 rfintfi;			// readback data: 
++							//		0x8e0~0x8e7[8 bytes]
++							
++	u32 rfintfo; 		// output data: 
++							//		0x860~0x86f [16 bytes]
++							
++	u32 rfintfe; 		// output enable: 
++							//		0x860~0x86f [16 bytes]
++							
++	u32 rf3wireOffset;	// LSSI data:
++							//		0x840~0x84f [16 bytes]
++							
++	u32 rfLSSI_Select;	// BB Band Select: 
++							//		0x878~0x87f [8 bytes]
++							
++	u32 rfTxGainStage;	// Tx gain stage: 
++							//		0x80c~0x80f [4 bytes]
++							
++	u32 rfHSSIPara1; 	// wire parameter control1 : 
++							//		0x820~0x823,0x828~0x82b, 0x830~0x833, 0x838~0x83b [16 bytes]
++							
++	u32 rfHSSIPara2; 	// wire parameter control2 : 
++							//		0x824~0x827,0x82c~0x82f, 0x834~0x837, 0x83c~0x83f [16 bytes]
++								
++	u32 rfSwitchControl; //Tx Rx antenna control : 
++							//		0x858~0x85f [16 bytes]
++								
++	u32 rfAGCControl1; 	//AGC parameter control1 : 
++							//		0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63, 0xc68~0xc6b [16 bytes] 
++								
++	u32 rfAGCControl2; 	//AGC parameter control2 : 
++							//		0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67, 0xc6c~0xc6f [16 bytes] 
++							
++	u32 rfRxIQImbalance; //OFDM Rx IQ imbalance matrix : 
++							//		0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27, 0xc2c~0xc2f [16 bytes]
++							
++	u32 rfRxAFE;  		//Rx IQ DC ofset and Rx digital filter, Rx DC notch filter : 
++							//		0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23, 0xc28~0xc2b [16 bytes]
++							
++	u32 rfTxIQImbalance; //OFDM Tx IQ imbalance matrix
++							//		0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93, 0xc98~0xc9b [16 bytes]
++							
++	u32 rfTxAFE; 		//Tx IQ DC Offset and Tx DFIR type
++							//		0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97, 0xc9c~0xc9f [16 bytes]
++								
++	u32 rfLSSIReadBack; 	//LSSI RF readback data SI mode
++								//		0x8a0~0x8af [16 bytes]
++
++	u32 rfLSSIReadBackPi; 	//LSSI RF readback data PI mode 0x8b8-8bc for Path A and B
++
++}BB_REGISTER_DEFINITION_T, *PBB_REGISTER_DEFINITION_T;
++
++#ifdef CONFIG_MP_INCLUDED
++typedef enum _ANTENNA_PATH{
++        ANTENNA_NONE 	= 0x00,
++		ANTENNA_D		,
++		ANTENNA_C		,
++		ANTENNA_CD		,
++		ANTENNA_B		,
++		ANTENNA_BD		,
++		ANTENNA_BC		,
++		ANTENNA_BCD		,
++		ANTENNA_A		,
++		ANTENNA_AD		,
++		ANTENNA_AC		,
++		ANTENNA_ACD		,
++		ANTENNA_AB		,
++		ANTENNA_ABD		,
++		ANTENNA_ABC		,
++		ANTENNA_ABCD	
++} ANTENNA_PATH;
++#endif
++
++typedef struct _R_ANTENNA_SELECT_OFDM{	
++	u32			r_tx_antenna:4;	
++	u32			r_ant_l:4;
++	u32			r_ant_non_ht:4;	
++	u32			r_ant_ht1:4;
++	u32			r_ant_ht2:4;
++	u32			r_ant_ht_s1:4;
++	u32			r_ant_non_ht_s1:4;
++	u32			OFDM_TXSC:2;
++	u32			Reserved:2;
++}R_ANTENNA_SELECT_OFDM;
++
++typedef struct _R_ANTENNA_SELECT_CCK{
++	u8			r_cckrx_enable_2:2;	
++	u8			r_cckrx_enable:2;
++	u8			r_ccktx_enable:4;
++}R_ANTENNA_SELECT_CCK;
++
++/*------------------------------Define structure----------------------------*/ 
++
++
++/*------------------------Export global variable----------------------------*/
++/*------------------------Export global variable----------------------------*/
++
++
++/*------------------------Export Marco Definition---------------------------*/
++/*------------------------Export Marco Definition---------------------------*/
++
++//Added for TX Power
++//u8 GetRightChnlPlace(u8 chnl);
++u8 rtl8192d_GetRightChnlPlaceforIQK(u8 chnl);
++u8 rtl8192d_getChnlGroupfromArray(u8 chnl);
++/*--------------------------Exported Function prototype---------------------*/
++//
++// BB and RF register read/write
++//
++void	rtl8192d_PHY_SetBBReg1Byte(	IN	PADAPTER	Adapter,
++								IN	u32		RegAddr,
++								IN	u32		BitMask,
++								IN	u32		Data	);
++u32	rtl8192d_PHY_QueryBBReg(	IN	PADAPTER	Adapter,
++								IN	u32		RegAddr,
++								IN	u32		BitMask	);
++void	rtl8192d_PHY_SetBBReg(	IN	PADAPTER	Adapter,
++								IN	u32		RegAddr,
++								IN	u32		BitMask,
++								IN	u32		Data	);
++u32	rtl8192d_PHY_QueryRFReg(	IN	PADAPTER			Adapter,
++								IN	RF_RADIO_PATH_E	eRFPath,
++								IN	u32				RegAddr,
++								IN	u32				BitMask	);
++void	rtl8192d_PHY_SetRFReg(	IN	PADAPTER			Adapter,
++								IN	RF_RADIO_PATH_E	eRFPath,
++								IN	u32				RegAddr,
++								IN	u32				BitMask,
++								IN	u32				Data	);
++
++//
++// Initialization related function
++//
++/* MAC/BB/RF HAL config */
++extern	int	PHY_MACConfig8192D(	IN	PADAPTER	Adapter	);
++extern	int	PHY_BBConfig8192D(	IN	PADAPTER	Adapter	);
++extern	int	PHY_RFConfig8192D(	IN	PADAPTER	Adapter	);
++/* RF config */
++int	rtl8192d_PHY_ConfigRFWithParaFile(	IN	PADAPTER	Adapter,
++												IN	u8* 	pFileName,
++												IN	RF_RADIO_PATH_E	eRFPath);
++int	rtl8192d_PHY_ConfigRFWithHeaderFile(	IN	PADAPTER			Adapter,
++												IN	RF_CONTENT			Content,
++												IN	RF_RADIO_PATH_E	eRFPath);
++/* BB/RF readback check for making sure init OK */
++int	rtl8192d_PHY_CheckBBAndRFOK(	IN	PADAPTER			Adapter,
++										IN	HW90_BLOCK_E		CheckBlock,
++										IN	RF_RADIO_PATH_E	eRFPath	  );
++/* Read initi reg value for tx power setting. */
++void	rtl8192d_PHY_GetHWRegOriginalValue(	IN	PADAPTER		Adapter	);
++
++//
++// RF Power setting
++//
++//extern	BOOLEAN	PHY_SetRFPowerState(IN	PADAPTER			Adapter, 
++//									IN	RT_RF_POWER_STATE	eRFPowerState);
++
++//
++// BB TX Power R/W
++//
++void	PHY_GetTxPowerLevel8192D(	IN	PADAPTER		Adapter,
++											OUT u32*    		powerlevel	);
++void	PHY_SetTxPowerLevel8192D(	IN	PADAPTER		Adapter,
++											IN	u8			channel	);
++BOOLEAN	PHY_UpdateTxPowerDbm8192D(	IN	PADAPTER	Adapter,
++											IN	int		powerInDbm	);
++
++//
++VOID 
++PHY_ScanOperationBackup8192D(IN	PADAPTER	Adapter,
++										IN	u8		Operation	);
++
++//
++// Switch bandwidth for 8192S
++//
++//void	PHY_SetBWModeCallback8192C(	IN	PRT_TIMER		pTimer	);
++void	PHY_SetBWMode8192D(	IN	PADAPTER			pAdapter,
++									IN	HT_CHANNEL_WIDTH	ChnlWidth,
++									IN	unsigned char	Offset	);
++
++//
++// Set FW CMD IO for 8192S.
++//
++//extern	BOOLEAN HalSetIO8192C(	IN	PADAPTER			Adapter,
++//									IN	IO_TYPE				IOType);
++
++//
++// Set A2 entry to fw for 8192S
++//
++extern	void FillA2Entry8192C(		IN	PADAPTER			Adapter,
++										IN	u8				index,
++										IN	u8*				val);
++
++
++//
++// channel switch related funciton
++//
++//extern	void	PHY_SwChnlCallback8192C(	IN	PRT_TIMER		pTimer	);
++void	PHY_SwChnl8192D(	IN	PADAPTER		pAdapter,
++									IN	u8			channel	);
++				// Call after initialization
++void	PHY_SwChnlPhy8192D(	IN	PADAPTER		pAdapter,
++									IN	u8			channel	);
++
++extern void ChkFwCmdIoDone(	IN	PADAPTER	Adapter);
++
++#ifdef USE_WORKITEM	
++//extern 	void SetIOWorkItemCallback( IN PVOID            pContext );
++#else
++//extern	void SetIOTimerCallback( IN PRT_TIMER		pTimer);
++#endif	
++				
++//
++// BB/MAC/RF other monitor API
++//
++void	PHY_SetMonitorMode8192D(IN	PADAPTER	pAdapter,
++										IN	BOOLEAN		bEnableMonitorMode	);
++
++BOOLEAN	PHY_CheckIsLegalRfPath8192D(IN	PADAPTER	pAdapter,
++											IN	u32		eRFPath	);
++
++//
++// IQ calibrate
++//
++void	rtl8192d_PHY_IQCalibrate(	IN	PADAPTER	pAdapter);
++
++
++//
++// LC calibrate
++//
++void	rtl8192d_PHY_LCCalibrate(IN	PADAPTER	pAdapter);
++
++//
++// AP calibrate
++//
++void	rtl8192d_PHY_APCalibrate(IN	PADAPTER	pAdapter, IN 	char		delta);
++
++
++//
++// Modify the value of the hw register when beacon interval be changed.
++//
++void	
++rtl8192d_PHY_SetBeaconHwReg(	IN	PADAPTER		Adapter,
++					IN	u16			BeaconInterval	);
++
++
++extern	VOID
++PHY_SwitchEphyParameter(
++	IN	PADAPTER			Adapter
++	);
++
++extern	VOID
++PHY_EnableHostClkReq(
++	IN	PADAPTER			Adapter
++	);
++
++BOOLEAN
++SetAntennaConfig92C(
++	IN	PADAPTER	Adapter,
++	IN	u8		DefaultAnt	
++	);
++
++VOID 
++PHY_StopTRXBeforeChangeBand8192D(
++	  PADAPTER		Adapter
++);
++
++VOID
++PHY_UpdateBBRFConfiguration8192D(
++	IN PADAPTER Adapter,
++	IN BOOLEAN bisBandSwitch
++);
++
++VOID PHY_ReadMacPhyMode92D(
++	IN PADAPTER	Adapter,
++	IN BOOLEAN 	AutoloadFail	
++);
++
++VOID PHY_ConfigMacPhyMode92D(
++	IN PADAPTER	Adapter
++);
++
++VOID PHY_ConfigMacPhyModeInfo92D(
++	IN PADAPTER	Adapter
++);
++
++VOID PHY_ConfigMacCoexist_RFPage92D(
++	IN PADAPTER	Adapter
++);
++
++VOID
++rtl8192d_PHY_InitRxSetting(
++	IN	PADAPTER Adapter
++);
++
++VOID
++rtl8192d_PHY_ResetIQKResult(
++	IN	PADAPTER Adapter
++);
++
++
++VOID 
++rtl8192d_PHY_SetRFPathSwitch(IN	PADAPTER	pAdapter, IN	BOOLEAN		bMain);
++
++VOID
++HalChangeCCKStatus8192D(
++	IN	PADAPTER	Adapter,
++	IN	BOOLEAN		bCCKDisable
++);
++
++VOID 
++PHY_InitPABias92D(IN	PADAPTER Adapter);
++
++/*--------------------------Exported Function prototype---------------------*/
++
++#define PHY_SetBBReg1Byte(Adapter, RegAddr, BitMask, Data) rtl8192d_PHY_SetBBReg1Byte((Adapter), (RegAddr), (BitMask), (Data))
++#define PHY_QueryBBReg(Adapter, RegAddr, BitMask) rtl8192d_PHY_QueryBBReg((Adapter), (RegAddr), (BitMask))
++#define PHY_SetBBReg(Adapter, RegAddr, BitMask, Data) rtl8192d_PHY_SetBBReg((Adapter), (RegAddr), (BitMask), (Data))
++#define PHY_QueryRFReg(Adapter, eRFPath, RegAddr, BitMask) rtl8192d_PHY_QueryRFReg((Adapter), (eRFPath), (RegAddr), (BitMask))
++#define PHY_SetRFReg(Adapter, eRFPath, RegAddr, BitMask, Data) rtl8192d_PHY_SetRFReg((Adapter), (eRFPath), (RegAddr), (BitMask), (Data))
++
++#define PHY_SetMacReg	PHY_SetBBReg
++
++#endif	// __INC_HAL8192SPHYCFG_H
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/Hal8192DPhyReg.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/Hal8192DPhyReg.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/Hal8192DPhyReg.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/Hal8192DPhyReg.h	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,1171 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++/*****************************************************************************
++ *
++ * Module:	__INC_HAL8192DPHYREG_H
++ *
++ *
++ * Note:	1. Define PMAC/BB register map
++ *			2. Define RF register map
++ *			3. PMAC/BB register bit mask.
++ *			4. RF reg bit mask.
++ *			5. Other BB/RF relative definition.
++ *			
++ *
++ * Export:	Constants, macro, functions(API), global variables(None).
++ *
++ * Abbrev:	
++ *
++ * History:
++ *		Data		Who		Remark 
++ *      08/07/2007  MHC    	1. Porting from 9x series PHYCFG.h.
++ *							2. Reorganize code architecture.
++ *	09/25/2008	MH		1. Add RL6052 register definition
++ * 
++ *****************************************************************************/
++#ifndef __INC_HAL8192DPHYREG_H
++#define __INC_HAL8192DPHYREG_H
++
++
++/*--------------------------Define Parameters-------------------------------*/
++
++//============================================================
++//       8192S Regsiter offset definition
++//============================================================
++
++//
++// BB-PHY register PMAC 0x100 PHY 0x800 - 0xEFF
++// 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF
++// 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00
++// 3. RF register 0x00-2E
++// 4. Bit Mask for BB/RF register
++// 5. Other defintion for BB/RF R/W
++//
++
++
++//
++// 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF
++// 1. Page1(0x100)
++//
++#define		rPMAC_Reset					0x100
++#define		rPMAC_TxStart					0x104
++#define		rPMAC_TxLegacySIG				0x108
++#define		rPMAC_TxHTSIG1				0x10c
++#define		rPMAC_TxHTSIG2				0x110
++#define		rPMAC_PHYDebug				0x114
++#define		rPMAC_TxPacketNum				0x118
++#define		rPMAC_TxIdle					0x11c
++#define		rPMAC_TxMACHeader0			0x120
++#define		rPMAC_TxMACHeader1			0x124
++#define		rPMAC_TxMACHeader2			0x128
++#define		rPMAC_TxMACHeader3			0x12c
++#define		rPMAC_TxMACHeader4			0x130
++#define		rPMAC_TxMACHeader5			0x134
++#define		rPMAC_TxDataType				0x138
++#define		rPMAC_TxRandomSeed			0x13c
++#define		rPMAC_CCKPLCPPreamble			0x140
++#define		rPMAC_CCKPLCPHeader			0x144
++#define		rPMAC_CCKCRC16				0x148
++#define		rPMAC_OFDMRxCRC32OK			0x170
++#define		rPMAC_OFDMRxCRC32Er			0x174
++#define		rPMAC_OFDMRxParityEr			0x178
++#define		rPMAC_OFDMRxCRC8Er			0x17c
++#define		rPMAC_CCKCRxRC16Er			0x180
++#define		rPMAC_CCKCRxRC32Er			0x184
++#define		rPMAC_CCKCRxRC32OK			0x188
++#define		rPMAC_TxStatus					0x18c
++
++//
++// 2. Page2(0x200)
++//
++// The following two definition are only used for USB interface.
++#define		RF_BB_CMD_ADDR				0x02c0	// RF/BB read/write command address.
++#define		RF_BB_CMD_DATA				0x02c4	// RF/BB read/write command data.
++
++//
++// 3. Page8(0x800)
++//
++#define		rFPGA0_RFMOD				0x800	//RF mode & CCK TxSC // RF BW Setting??
++
++#define		rFPGA0_TxInfo				0x804	// Status report??
++#define		rFPGA0_PSDFunction			0x808
++
++#define		rFPGA0_TxGainStage			0x80c	// Set TX PWR init gain?
++
++#define		rFPGA0_RFTiming1			0x810	// Useless now
++#define		rFPGA0_RFTiming2			0x814
++
++#define		rFPGA0_XA_HSSIParameter1		0x820	// RF 3 wire register
++#define		rFPGA0_XA_HSSIParameter2		0x824
++#define		rFPGA0_XB_HSSIParameter1		0x828
++#define		rFPGA0_XB_HSSIParameter2		0x82c
++
++#define		rFPGA0_XA_LSSIParameter		0x840
++#define		rFPGA0_XB_LSSIParameter		0x844
++
++#define		rFPGA0_RFWakeUpParameter		0x850	// Useless now
++#define		rFPGA0_RFSleepUpParameter		0x854
++
++#define		rFPGA0_XAB_SwitchControl		0x858	// RF Channel switch
++#define		rFPGA0_XCD_SwitchControl		0x85c
++
++#define		rFPGA0_XA_RFInterfaceOE		0x860	// RF Channel switch
++#define		rFPGA0_XB_RFInterfaceOE		0x864
++
++#define		rFPGA0_XAB_RFInterfaceSW		0x870	// RF Interface Software Control
++#define		rFPGA0_XCD_RFInterfaceSW		0x874
++
++#define		rFPGA0_XAB_RFParameter		0x878	// RF Parameter
++#define		rFPGA0_XCD_RFParameter		0x87c
++
++#define		rFPGA0_AnalogParameter1		0x880	// Crystal cap setting RF-R/W protection for parameter4??
++#define		rFPGA0_AnalogParameter2		0x884
++#define		rFPGA0_AnalogParameter3		0x888
++#define		rFPGA0_AdDaClockEn			0x888	// enable ad/da clock1 for dual-phy
++#define		rFPGA0_AnalogParameter4		0x88c
++
++#define		rFPGA0_XA_LSSIReadBack		0x8a0	// Tranceiver LSSI Readback
++#define		rFPGA0_XB_LSSIReadBack		0x8a4
++#define		rFPGA0_XC_LSSIReadBack		0x8a8
++#define		rFPGA0_XD_LSSIReadBack		0x8ac
++
++#define		rFPGA0_PSDReport				0x8b4	// Useless now
++#define		TransceiverA_HSPI_Readback	0x8b8	// Transceiver A HSPI Readback
++#define		TransceiverB_HSPI_Readback	0x8bc	// Transceiver B HSPI Readback
++#define		rFPGA0_XAB_RFInterfaceRB		0x8e0	// Useless now // RF Interface Readback Value
++#define		rFPGA0_XCD_RFInterfaceRB		0x8e4	// Useless now
++
++//
++// 4. Page9(0x900)
++//
++#define		rFPGA1_RFMOD				0x900	//RF mode & OFDM TxSC // RF BW Setting??
++
++#define		rFPGA1_TxBlock				0x904	// Useless now
++#define		rFPGA1_DebugSelect			0x908	// Useless now
++#define		rFPGA1_TxInfo				0x90c	// Useless now // Status report??
++
++//
++// 5. PageA(0xA00)
++//
++// Set Control channel to upper or lower. These settings are required only for 40MHz
++#define		rCCK0_System				0xa00
++
++#define		rCCK0_AFESetting			0xa04	// Disable init gain now // Select RX path by RSSI
++#define		rCCK0_CCA					0xa08	// Disable init gain now // Init gain
++
++#define		rCCK0_RxAGC1				0xa0c 	//AGC default value, saturation level // Antenna Diversity, RX AGC, LNA Threshold, RX LNA Threshold useless now. Not the same as 90 series
++#define		rCCK0_RxAGC2				0xa10 	//AGC & DAGC
++
++#define		rCCK0_RxHP					0xa14
++
++#define		rCCK0_DSPParameter1		0xa18	//Timing recovery & Channel estimation threshold
++#define		rCCK0_DSPParameter2		0xa1c	//SQ threshold
++
++#define		rCCK0_TxFilter1				0xa20
++#define		rCCK0_TxFilter2				0xa24
++#define		rCCK0_DebugPort			0xa28	//debug port and Tx filter3
++#define		rCCK0_FalseAlarmReport		0xa2c	//0xa2d	useless now 0xa30-a4f channel report
++#define		rCCK0_TRSSIReport         		0xa50
++#define		rCCK0_RxReport            		0xa54  //0xa57
++#define		rCCK0_FACounterLower      	0xa5c  //0xa5b
++#define		rCCK0_FACounterUpper      	0xa58  //0xa5c
++
++//
++// PageB(0xB00)
++//
++#define		rPdp_AntA      					0xb00  
++#define		rPdp_AntA_4    				0xb04
++#define		rPdp_AntA_8    				0xb08
++#define		rPdp_AntA_C    				0xb0c
++#define		rPdp_AntA_10    				0xb10
++#define		rPdp_AntA_14    				0xb14
++#define		rPdp_AntA_18    				0xb18
++#define		rPdp_AntA_1C    				0xb1c
++#define		rPdp_AntA_20    				0xb20
++#define		rPdp_AntA_24    				0xb24
++
++#define		rConfig_Pmpd_AntA 			0xb28
++#define		rConfig_ram64x16				0xb2c
++
++#define		rBndA						0xb30
++#define		rHssiPar						0xb34
++
++#define		rConfig_AntA 					0xb68
++#define		rConfig_AntB 					0xb6c
++
++#define		rPdp_AntB 					0xb70
++#define		rPdp_AntB_4 					0xb74
++#define		rPdp_AntB_8 					0xb78
++#define		rPdp_AntB_C 					0xb7c
++#define		rPdp_AntB_10 					0xb80
++#define		rPdp_AntB_14 					0xb84
++#define		rPdp_AntB_18 					0xb88
++#define		rPdp_AntB_1C 					0xb8c
++#define		rPdp_AntB_20 					0xb90
++#define		rPdp_AntB_24 					0xb94
++
++#define		rConfig_Pmpd_AntB			0xb98
++
++#define		rBndB						0xba0
++
++#define		rAPK							0xbd8
++#define		rPm_Rx0_AntA				0xbdc
++#define		rPm_Rx1_AntA				0xbe0
++#define		rPm_Rx2_AntA				0xbe4
++#define		rPm_Rx3_AntA				0xbe8
++#define		rPm_Rx0_AntB				0xbec
++#define		rPm_Rx1_AntB				0xbf0
++#define		rPm_Rx2_AntB				0xbf4
++#define		rPm_Rx3_AntB				0xbf8
++
++//
++// 6. PageC(0xC00)
++//
++#define		rOFDM0_LSTF				0xc00
++
++#define		rOFDM0_TRxPathEnable		0xc04
++#define		rOFDM0_TRMuxPar			0xc08
++#define		rOFDM0_TRSWIsolation		0xc0c
++
++#define		rOFDM0_XARxAFE			0xc10  //RxIQ DC offset, Rx digital filter, DC notch filter
++#define		rOFDM0_XARxIQImbalance    	0xc14  //RxIQ imblance matrix
++#define		rOFDM0_XBRxAFE            		0xc18
++#define		rOFDM0_XBRxIQImbalance    	0xc1c
++#define		rOFDM0_XCRxAFE            		0xc20
++#define		rOFDM0_XCRxIQImbalance    	0xc24
++#define		rOFDM0_XDRxAFE            		0xc28
++#define		rOFDM0_XDRxIQImbalance    	0xc2c
++
++#define		rOFDM0_RxDetector1			0xc30  //PD,BW & SBD	// DM tune init gain
++#define		rOFDM0_RxDetector2			0xc34  //SBD & Fame Sync. 
++#define		rOFDM0_RxDetector3			0xc38  //Frame Sync.
++#define		rOFDM0_RxDetector4			0xc3c  //PD, SBD, Frame Sync & Short-GI
++
++#define		rOFDM0_RxDSP				0xc40  //Rx Sync Path
++#define		rOFDM0_CFOandDAGC		0xc44  //CFO & DAGC
++#define		rOFDM0_CCADropThreshold	0xc48 //CCA Drop threshold
++#define		rOFDM0_ECCAThreshold		0xc4c // energy CCA
++
++#define		rOFDM0_XAAGCCore1			0xc50	// DIG
++#define		rOFDM0_XAAGCCore2			0xc54
++#define		rOFDM0_XBAGCCore1			0xc58
++#define		rOFDM0_XBAGCCore2			0xc5c
++#define		rOFDM0_XCAGCCore1			0xc60
++#define		rOFDM0_XCAGCCore2			0xc64
++#define		rOFDM0_XDAGCCore1			0xc68
++#define		rOFDM0_XDAGCCore2			0xc6c
++
++#define		rOFDM0_AGCParameter1			0xc70
++#define		rOFDM0_AGCParameter2			0xc74
++#define		rOFDM0_AGCRSSITable			0xc78
++#define		rOFDM0_HTSTFAGC				0xc7c
++
++#define		rOFDM0_XATxIQImbalance		0xc80	// TX PWR TRACK and DIG
++#define		rOFDM0_XATxAFE				0xc84
++#define		rOFDM0_XBTxIQImbalance		0xc88
++#define		rOFDM0_XBTxAFE				0xc8c
++#define		rOFDM0_XCTxIQImbalance		0xc90
++#define		rOFDM0_XCTxAFE            			0xc94
++#define		rOFDM0_XDTxIQImbalance		0xc98
++#define		rOFDM0_XDTxAFE				0xc9c
++
++#define		rOFDM0_RxIQExtAnta			0xca0
++#define		rOFDM0_TxCoeff1				0xca4
++#define		rOFDM0_TxCoeff2				0xca8
++#define		rOFDM0_TxCoeff3				0xcac
++#define		rOFDM0_TxCoeff4				0xcb0
++#define		rOFDM0_TxCoeff5				0xcb4
++#define		rOFDM0_TxCoeff6				0xcb8
++#define		rOFDM0_RxHPParameter			0xce0
++#define		rOFDM0_TxPseudoNoiseWgt		0xce4
++#define		rOFDM0_FrameSync				0xcf0
++#define		rOFDM0_DFSReport				0xcf4
++
++//
++// 7. PageD(0xD00)
++//
++#define		rOFDM1_LSTF					0xd00
++#define		rOFDM1_TRxPathEnable			0xd04
++
++#define		rOFDM1_CFO						0xd08	// No setting now
++#define		rOFDM1_CSI1					0xd10
++#define		rOFDM1_SBD						0xd14
++#define		rOFDM1_CSI2					0xd18
++#define		rOFDM1_CFOTracking			0xd2c
++#define		rOFDM1_TRxMesaure1			0xd34
++#define		rOFDM1_IntfDet					0xd3c
++#define		rOFDM1_PseudoNoiseStateAB		0xd50
++#define		rOFDM1_PseudoNoiseStateCD		0xd54
++#define		rOFDM1_RxPseudoNoiseWgt		0xd58
++
++#define		rOFDM_PHYCounter1				0xda0  //cca, parity fail
++#define		rOFDM_PHYCounter2				0xda4  //rate illegal, crc8 fail
++#define		rOFDM_PHYCounter3				0xda8  //MCS not support
++
++#define		rOFDM_ShortCFOAB				0xdac	// No setting now
++#define		rOFDM_ShortCFOCD				0xdb0
++#define		rOFDM_LongCFOAB				0xdb4
++#define		rOFDM_LongCFOCD				0xdb8
++#define		rOFDM_TailCFOAB				0xdbc
++#define		rOFDM_TailCFOCD				0xdc0
++#define		rOFDM_PWMeasure1          		0xdc4
++#define		rOFDM_PWMeasure2          		0xdc8
++#define		rOFDM_BWReport				0xdcc
++#define		rOFDM_AGCReport				0xdd0
++#define		rOFDM_RxSNR					0xdd4
++#define		rOFDM_RxEVMCSI				0xdd8
++#define		rOFDM_SIGReport				0xddc
++
++
++//
++// 8. PageE(0xE00)
++//
++#define		rTxAGC_A_Rate18_06			0xe00
++#define		rTxAGC_A_Rate54_24			0xe04
++#define		rTxAGC_A_CCK1_Mcs32			0xe08
++#define		rTxAGC_A_Mcs03_Mcs00			0xe10
++#define		rTxAGC_A_Mcs07_Mcs04			0xe14
++#define		rTxAGC_A_Mcs11_Mcs08			0xe18
++#define		rTxAGC_A_Mcs15_Mcs12			0xe1c
++
++#define		rTxAGC_B_Rate18_06			0x830
++#define		rTxAGC_B_Rate54_24			0x834
++#define		rTxAGC_B_CCK1_55_Mcs32		0x838
++#define		rTxAGC_B_Mcs03_Mcs00			0x83c
++#define		rTxAGC_B_Mcs07_Mcs04			0x848
++#define		rTxAGC_B_Mcs11_Mcs08			0x84c
++#define		rTxAGC_B_Mcs15_Mcs12			0x868
++#define		rTxAGC_B_CCK11_A_CCK2_11		0x86c
++
++#define		rFPGA0_IQK						0xe28
++#define		rTx_IQK_Tone_A					0xe30
++#define		rRx_IQK_Tone_A					0xe34
++#define		rTx_IQK_PI_A					0xe38
++#define		rRx_IQK_PI_A					0xe3c
++
++#define		rTx_IQK 						0xe40
++#define		rRx_IQK							0xe44
++#define		rIQK_AGC_Pts					0xe48
++#define		rIQK_AGC_Rsp					0xe4c
++#define		rTx_IQK_Tone_B					0xe50
++#define		rRx_IQK_Tone_B					0xe54
++#define		rTx_IQK_PI_B					0xe58
++#define		rRx_IQK_PI_B					0xe5c
++#define		rIQK_AGC_Cont					0xe60
++
++#define		rBlue_Tooth						0xe6c
++#define		rRx_Wait_CCA					0xe70
++#define		rTx_CCK_RFON					0xe74
++#define		rTx_CCK_BBON					0xe78
++#define		rTx_OFDM_RFON					0xe7c
++#define		rTx_OFDM_BBON					0xe80
++#define		rTx_To_Rx						0xe84
++#define		rTx_To_Tx						0xe88
++#define		rRx_CCK							0xe8c
++
++#define		rTx_Power_Before_IQK_A		0xe94
++#define		rTx_Power_After_IQK_A			0xe9c
++
++#define		rRx_Power_Before_IQK_A		0xea0
++#define		rRx_Power_Before_IQK_A_2		0xea4
++#define		rRx_Power_After_IQK_A			0xea8
++#define		rRx_Power_After_IQK_A_2		0xeac
++
++#define		rTx_Power_Before_IQK_B		0xeb4
++#define		rTx_Power_After_IQK_B			0xebc
++
++#define		rRx_Power_Before_IQK_B		0xec0
++#define		rRx_Power_Before_IQK_B_2		0xec4
++#define		rRx_Power_After_IQK_B			0xec8
++#define		rRx_Power_After_IQK_B_2		0xecc
++
++#define		rRx_OFDM						0xed0
++#define		rRx_Wait_RIFS 					0xed4
++#define		rRx_TO_Rx 						0xed8
++#define		rStandby 						0xedc
++#define		rSleep 							0xee0
++#define		rPMPD_ANAEN					0xeec
++
++//
++// 7. RF Register 0x00-0x2E (RF 8256)
++//    RF-0222D 0x00-3F
++//
++//Zebra1
++#define		rZebra1_HSSIEnable				0x0	// Useless now
++#define		rZebra1_TRxEnable1				0x1
++#define		rZebra1_TRxEnable2				0x2
++#define		rZebra1_AGC					0x4
++#define		rZebra1_ChargePump			0x5
++#define		rZebra1_Channel				0x7	// RF channel switch
++
++//#endif
++#define		rZebra1_TxGain					0x8	// Useless now
++#define		rZebra1_TxLPF					0x9
++#define		rZebra1_RxLPF					0xb
++#define		rZebra1_RxHPFCorner			0xc
++
++//Zebra4
++#define		rGlobalCtrl						0	// Useless now
++#define		rRTL8256_TxLPF					19
++#define		rRTL8256_RxLPF					11
++
++//RTL8258
++#define		rRTL8258_TxLPF					0x11	// Useless now
++#define		rRTL8258_RxLPF					0x13
++#define		rRTL8258_RSSILPF				0xa
++
++//
++// RL6052 Register definition
++//
++#define		RF_AC						0x00	// 
++
++#define		RF_IQADJ_G1				0x01	// 
++#define		RF_IQADJ_G2				0x02	// 
++#define		RF_BS_PA_APSET_G1_G4		0x03
++#define		RF_BS_PA_APSET_G5_G8		0x04
++#define		RF_POW_TRSW				0x05	// 
++
++#define		RF_GAIN_RX					0x06	// 
++#define		RF_GAIN_TX					0x07	// 
++
++#define		RF_TXM_IDAC				0x08	// 
++#define		RF_IPA_G					0x09	// 
++#define		RF_TXBIAS_G				0x0A
++#define		RF_TXPA_AG					0x0B
++#define		RF_IPA_A					0x0C	// 
++#define		RF_TXBIAS_A				0x0D
++#define		RF_BS_PA_APSET_G9_G11	0x0E
++#define		RF_BS_IQGEN				0x0F	// 
++
++#define		RF_MODE1					0x10	// 
++#define		RF_MODE2					0x11	// 
++
++#define		RF_RX_AGC_HP				0x12	// 
++#define		RF_TX_AGC					0x13	// 
++#define		RF_BIAS						0x14	// 
++#define		RF_IPA						0x15	// 
++#define		RF_POW_ABILITY			0x17	// 
++#define		RF_MODE_AG				0x18	// 
++#define		rRfChannel					0x18	// RF channel and BW switch
++#define		RF_CHNLBW					0x18	// RF channel and BW switch
++#define		RF_TOP						0x19	// 
++
++#define		RF_RX_G1					0x1A	// 
++#define		RF_RX_G2					0x1B	// 
++
++#define		RF_RX_BB2					0x1C	// 
++#define		RF_RX_BB1					0x1D	// 
++
++#define		RF_RCK1					0x1E	// 
++#define		RF_RCK2					0x1F	// 
++
++#define		RF_TX_G1					0x20	// 
++#define		RF_TX_G2					0x21	// 
++#define		RF_TX_G3					0x22	// 
++
++#define		RF_TX_BB1					0x23	// 
++
++#define		RF_T_METER					0x42	// 
++
++#define		RF_SYN_G1					0x25	// RF TX Power control
++#define		RF_SYN_G2					0x26	// RF TX Power control
++#define		RF_SYN_G3					0x27	// RF TX Power control
++#define		RF_SYN_G4					0x28	// RF TX Power control
++#define		RF_SYN_G5					0x29	// RF TX Power control
++#define		RF_SYN_G6					0x2A	// RF TX Power control
++#define		RF_SYN_G7					0x2B	// RF TX Power control
++#define		RF_SYN_G8					0x2C	// RF TX Power control
++
++#define		RF_RCK_OS					0x30	// RF TX PA control
++
++#define		RF_TXPA_G1					0x31	// RF TX PA control
++#define		RF_TXPA_G2					0x32	// RF TX PA control
++#define		RF_TXPA_G3					0x33	// RF TX PA control
++#define		RF_LOBF_9					0x38
++#define		RF_RXRF_A3					0x3C	//
++#define		RF_TRSW					0x3F
++
++#define		RF_TXRF_A2					0x41
++#define		RF_TXPA_G4					0x46
++#define		RF_TXPA_A4					0x4B
++
++//
++//Bit Mask
++//
++// 1. Page1(0x100)
++#define		bBBResetB						0x100	// Useless now?
++#define		bGlobalResetB					0x200
++#define		bOFDMTxStart					0x4
++#define		bCCKTxStart						0x8
++#define		bCRC32Debug					0x100
++#define		bPMACLoopback					0x10
++#define		bTxLSIG							0xffffff
++#define		bOFDMTxRate					0xf
++#define		bOFDMTxReserved				0x10
++#define		bOFDMTxLength					0x1ffe0
++#define		bOFDMTxParity					0x20000
++#define		bTxHTSIG1						0xffffff
++#define		bTxHTMCSRate					0x7f
++#define		bTxHTBW						0x80
++#define		bTxHTLength					0xffff00
++#define		bTxHTSIG2						0xffffff
++#define		bTxHTSmoothing					0x1
++#define		bTxHTSounding					0x2
++#define		bTxHTReserved					0x4
++#define		bTxHTAggreation				0x8
++#define		bTxHTSTBC						0x30
++#define		bTxHTAdvanceCoding			0x40
++#define		bTxHTShortGI					0x80
++#define		bTxHTNumberHT_LTF			0x300
++#define		bTxHTCRC8						0x3fc00
++#define		bCounterReset					0x10000
++#define		bNumOfOFDMTx					0xffff
++#define		bNumOfCCKTx					0xffff0000
++#define		bTxIdleInterval					0xffff
++#define		bOFDMService					0xffff0000
++#define		bTxMACHeader					0xffffffff
++#define		bTxDataInit						0xff
++#define		bTxHTMode						0x100
++#define		bTxDataType					0x30000
++#define		bTxRandomSeed					0xffffffff
++#define		bCCKTxPreamble					0x1
++#define		bCCKTxSFD						0xffff0000
++#define		bCCKTxSIG						0xff
++#define		bCCKTxService					0xff00
++#define		bCCKLengthExt					0x8000
++#define		bCCKTxLength					0xffff0000
++#define		bCCKTxCRC16					0xffff
++#define		bCCKTxStatus					0x1
++#define		bOFDMTxStatus					0x2
++
++#define 		IS_BB_REG_OFFSET_92S(_Offset)		((_Offset >= 0x800) && (_Offset <= 0xfff))
++
++// 2. Page8(0x800)
++#define		bRFMOD							0x1	// Reg 0x800 rFPGA0_RFMOD
++#define		bJapanMode						0x2
++#define		bCCKTxSC						0x30
++#define		bCCKEn							0x1000000
++#define		bOFDMEn						0x2000000
++
++#define		bOFDMRxADCPhase           		0x10000	// Useless now
++#define		bOFDMTxDACPhase           		0x40000
++#define		bXATxAGC                  			0x3f
++
++#define		bAntennaSelect                 		0x0300
++
++#define		bXBTxAGC                  			0xf00	// Reg 80c rFPGA0_TxGainStage
++#define		bXCTxAGC                  			0xf000
++#define		bXDTxAGC                  			0xf0000
++       		
++#define		bPAStart                  			0xf0000000	// Useless now
++#define		bTRStart                  			0x00f00000
++#define		bRFStart                  			0x0000f000
++#define		bBBStart                  			0x000000f0
++#define		bBBCCKStart               		0x0000000f
++#define		bPAEnd                    			0xf          //Reg0x814
++#define		bTREnd                    			0x0f000000
++#define		bRFEnd                    			0x000f0000
++#define		bCCAMask                  			0x000000f0   //T2R
++#define		bR2RCCAMask               		0x00000f00
++#define		bHSSI_R2TDelay            		0xf8000000
++#define		bHSSI_T2RDelay            		0xf80000
++#define		bContTxHSSI               		0x400     //chane gain at continue Tx
++#define		bIGFromCCK                		0x200
++#define		bAGCAddress               		0x3f
++#define		bRxHPTx                   			0x7000
++#define		bRxHPT2R                  			0x38000
++#define		bRxHPCCKIni               		0xc0000
++#define		bAGCTxCode                		0xc00000
++#define		bAGCRxCode                		0x300000
++
++#define		b3WireDataLength          		0x800	// Reg 0x820~84f rFPGA0_XA_HSSIParameter1
++#define		b3WireAddressLength       		0x400
++
++#define		b3WireRFPowerDown         		0x1	// Useless now
++//#define bHWSISelect               		0x8
++#define		b5GPAPEPolarity           		0x40000000
++#define		b2GPAPEPolarity           		0x80000000
++#define		bRFSW_TxDefaultAnt        		0x3
++#define		bRFSW_TxOptionAnt         		0x30
++#define		bRFSW_RxDefaultAnt        		0x300
++#define		bRFSW_RxOptionAnt         		0x3000
++#define		bRFSI_3WireData           		0x1
++#define		bRFSI_3WireClock          		0x2
++#define		bRFSI_3WireLoad           		0x4
++#define		bRFSI_3WireRW             		0x8
++#define		bRFSI_3Wire               			0xf
++
++#define		bRFSI_RFENV               		0x10	// Reg 0x870 rFPGA0_XAB_RFInterfaceSW
++
++#define		bRFSI_TRSW                		0x20	// Useless now
++#define		bRFSI_TRSWB               		0x40
++#define		bRFSI_ANTSW               		0x100
++#define		bRFSI_ANTSWB              		0x200
++#define		bRFSI_PAPE                			0x400
++#define		bRFSI_PAPE5G              		0x800 
++#define		bBandSelect               			0x1
++#define		bHTSIG2_GI                			0x80
++#define		bHTSIG2_Smoothing         		0x01
++#define		bHTSIG2_Sounding          		0x02
++#define		bHTSIG2_Aggreaton         		0x08
++#define		bHTSIG2_STBC              		0x30
++#define		bHTSIG2_AdvCoding         		0x40
++#define		bHTSIG2_NumOfHTLTF        	0x300
++#define		bHTSIG2_CRC8              		0x3fc
++#define		bHTSIG1_MCS               		0x7f
++#define		bHTSIG1_BandWidth         		0x80
++#define		bHTSIG1_HTLength          		0xffff
++#define		bLSIG_Rate                			0xf
++#define		bLSIG_Reserved            		0x10
++#define		bLSIG_Length              		0x1fffe
++#define		bLSIG_Parity              			0x20
++#define		bCCKRxPhase               		0x4
++
++#define		bLSSIReadAddress          		0x7f800000   // T65 RF
++
++#define		bLSSIReadEdge             		0x80000000   //LSSI "Read" edge signal
++
++#define		bLSSIReadBackData         		0xfffff		// T65 RF
++
++#define		bLSSIReadOKFlag           		0x1000	// Useless now
++#define		bCCKSampleRate            		0x8       //0: 44MHz, 1:88MHz       		
++#define		bRegulator0Standby        		0x1
++#define		bRegulatorPLLStandby      		0x2
++#define		bRegulator1Standby        		0x4
++#define		bPLLPowerUp               		0x8
++#define		bDPLLPowerUp              		0x10
++#define		bDA10PowerUp              		0x20
++#define		bAD7PowerUp               		0x200
++#define		bDA6PowerUp               		0x2000
++#define		bXtalPowerUp              		0x4000
++#define		b40MDClkPowerUP           		0x8000
++#define		bDA6DebugMode             		0x20000
++#define		bDA6Swing                 			0x380000
++
++#define		bADClkPhase               		0x4000000	// Reg 0x880 rFPGA0_AnalogParameter1 20/40 CCK support switch 40/80 BB MHZ
++
++#define		b80MClkDelay              		0x18000000	// Useless
++#define		bAFEWatchDogEnable        		0x20000000
++
++#define		bXtalCap01                			0xc0000000	// Reg 0x884 rFPGA0_AnalogParameter2 Crystal cap
++#define		bXtalCap23                			0x3
++#define		bXtalCap92x					0x0f000000
++#define 		bXtalCap                			0x0f000000
++
++#define		bIntDifClkEnable          		0x400	// Useless
++#define		bExtSigClkEnable         	 	0x800
++#define		bBandgapMbiasPowerUp      	0x10000
++#define		bAD11SHGain               		0xc0000
++#define		bAD11InputRange           		0x700000
++#define		bAD11OPCurrent            		0x3800000
++#define		bIPathLoopback            		0x4000000
++#define		bQPathLoopback            		0x8000000
++#define		bAFELoopback              		0x10000000
++#define		bDA10Swing                		0x7e0
++#define		bDA10Reverse              		0x800
++#define		bDAClkSource              		0x1000
++#define		bAD7InputRange            		0x6000
++#define		bAD7Gain                  			0x38000
++#define		bAD7OutputCMMode          		0x40000
++#define		bAD7InputCMMode           		0x380000
++#define		bAD7Current               			0xc00000
++#define		bRegulatorAdjust          		0x7000000
++#define		bAD11PowerUpAtTx          		0x1
++#define		bDA10PSAtTx               		0x10
++#define		bAD11PowerUpAtRx          		0x100
++#define		bDA10PSAtRx               		0x1000       		
++#define		bCCKRxAGCFormat           		0x200       		
++#define		bPSDFFTSamplepPoint       		0xc000
++#define		bPSDAverageNum            		0x3000
++#define		bIQPathControl            		0xc00
++#define		bPSDFreq                  			0x3ff
++#define		bPSDAntennaPath           		0x30
++#define		bPSDIQSwitch              		0x40
++#define		bPSDRxTrigger             		0x400000
++#define		bPSDTxTrigger             		0x80000000
++#define		bPSDSineToneScale        		0x7f000000
++#define		bPSDReport                			0xffff
++
++// 3. Page9(0x900)
++#define		bOFDMTxSC                 		0x30000000	// Useless
++#define		bCCKTxOn                  			0x1
++#define		bOFDMTxOn                 		0x2
++#define		bDebugPage                		0xfff  //reset debug page and also HWord, LWord
++#define		bDebugItem                		0xff   //reset debug page and LWord
++#define		bAntL              	       		0x10
++#define		bAntNonHT           	      			0x100
++#define		bAntHT1               			0x1000
++#define		bAntHT2                   			0x10000
++#define		bAntHT1S1                 			0x100000
++#define		bAntNonHTS1               		0x1000000
++
++// 4. PageA(0xA00)
++#define		bCCKBBMode				0x3	// Useless
++#define		bCCKTxPowerSaving		0x80
++#define		bCCKRxPowerSaving		0x40
++
++#define		bCCKSideBand			0x10	// Reg 0xa00 rCCK0_System 20/40 switch
++
++#define		bCCKScramble			0x8	// Useless
++#define		bCCKAntDiversity		0x8000
++#define		bCCKCarrierRecovery		0x4000
++#define		bCCKTxRate				0x3000
++#define		bCCKDCCancel			0x0800
++#define		bCCKISICancel			0x0400
++#define		bCCKMatchFilter			0x0200
++#define		bCCKEqualizer			0x0100
++#define		bCCKPreambleDetect		0x800000
++#define		bCCKFastFalseCCA		0x400000
++#define		bCCKChEstStart			0x300000
++#define		bCCKCCACount			0x080000
++#define		bCCKcs_lim				0x070000
++#define		bCCKBistMode			0x80000000
++#define		bCCKCCAMask			0x40000000
++#define		bCCKTxDACPhase		0x4
++#define		bCCKRxADCPhase		0x20000000   //r_rx_clk
++#define		bCCKr_cp_mode0		0x0100
++#define		bCCKTxDCOffset			0xf0
++#define		bCCKRxDCOffset			0xf
++#define		bCCKCCAMode			0xc000
++#define		bCCKFalseCS_lim			0x3f00
++#define		bCCKCS_ratio			0xc00000
++#define		bCCKCorgBit_sel			0x300000
++#define		bCCKPD_lim				0x0f0000
++#define		bCCKNewCCA			0x80000000
++#define		bCCKRxHPofIG			0x8000
++#define		bCCKRxIG				0x7f00
++#define		bCCKLNAPolarity			0x800000
++#define		bCCKRx1stGain			0x7f0000
++#define		bCCKRFExtend			0x20000000 //CCK Rx Iinital gain polarity
++#define		bCCKRxAGCSatLevel		0x1f000000
++#define		bCCKRxAGCSatCount		0xe0
++#define		bCCKRxRFSettle			0x1f       //AGCsamp_dly
++#define		bCCKFixedRxAGC			0x8000
++//#define bCCKRxAGCFormat         	 	0x4000   //remove to HSSI register 0x824
++#define		bCCKAntennaPolarity		0x2000
++#define		bCCKTxFilterType		0x0c00
++#define		bCCKRxAGCReportType	0x0300
++#define		bCCKRxDAGCEn			0x80000000
++#define		bCCKRxDAGCPeriod		0x20000000
++#define		bCCKRxDAGCSatLevel		0x1f000000
++#define		bCCKTimingRecovery		0x800000
++#define		bCCKTxC0				0x3f0000
++#define		bCCKTxC1				0x3f000000
++#define		bCCKTxC2				0x3f
++#define		bCCKTxC3				0x3f00
++#define		bCCKTxC4				0x3f0000
++#define		bCCKTxC5				0x3f000000
++#define		bCCKTxC6				0x3f
++#define		bCCKTxC7				0x3f00
++#define		bCCKDebugPort			0xff0000
++#define		bCCKDACDebug			0x0f000000
++#define		bCCKFalseAlarmEnable	0x8000
++#define		bCCKFalseAlarmRead		0x4000
++#define		bCCKTRSSI				0x7f
++#define		bCCKRxAGCReport		0xfe
++#define		bCCKRxReport_AntSel	0x80000000
++#define		bCCKRxReport_MFOff		0x40000000
++#define		bCCKRxRxReport_SQLoss	0x20000000
++#define		bCCKRxReport_Pktloss	0x10000000
++#define		bCCKRxReport_Lockedbit	0x08000000
++#define		bCCKRxReport_RateError	0x04000000
++#define		bCCKRxReport_RxRate	0x03000000
++#define		bCCKRxFACounterLower	0xff
++#define		bCCKRxFACounterUpper	0xff000000
++#define		bCCKRxHPAGCStart		0xe000
++#define		bCCKRxHPAGCFinal		0x1c00       		
++#define		bCCKRxFalseAlarmEnable	0x8000
++#define		bCCKFACounterFreeze	0x4000       		
++#define		bCCKTxPathSel			0x10000000
++#define		bCCKDefaultRxPath		0xc000000
++#define		bCCKOptionRxPath		0x3000000
++
++// 5. PageC(0xC00)
++#define		bNumOfSTF				0x3	// Useless
++#define		bShift_L					0xc0
++#define		bGI_TH					0xc
++#define		bRxPathA				0x1
++#define		bRxPathB				0x2
++#define		bRxPathC				0x4
++#define		bRxPathD				0x8
++#define		bTxPathA				0x1
++#define		bTxPathB				0x2
++#define		bTxPathC				0x4
++#define		bTxPathD				0x8
++#define		bTRSSIFreq				0x200
++#define		bADCBackoff				0x3000
++#define		bDFIRBackoff			0xc000
++#define		bTRSSILatchPhase		0x10000
++#define		bRxIDCOffset			0xff
++#define		bRxQDCOffset			0xff00
++#define		bRxDFIRMode			0x1800000
++#define		bRxDCNFType			0xe000000
++#define		bRXIQImb_A				0x3ff
++#define		bRXIQImb_B				0xfc00
++#define		bRXIQImb_C				0x3f0000
++#define		bRXIQImb_D				0xffc00000
++#define		bDC_dc_Notch			0x60000
++#define		bRxNBINotch			0x1f000000
++#define		bPD_TH					0xf
++#define		bPD_TH_Opt2			0xc000
++#define		bPWED_TH				0x700
++#define		bIfMF_Win_L			0x800
++#define		bPD_Option				0x1000
++#define		bMF_Win_L				0xe000
++#define		bBW_Search_L			0x30000
++#define		bwin_enh_L				0xc0000
++#define		bBW_TH					0x700000
++#define		bED_TH2				0x3800000
++#define		bBW_option				0x4000000
++#define		bRatio_TH				0x18000000
++#define		bWindow_L				0xe0000000
++#define		bSBD_Option				0x1
++#define		bFrame_TH				0x1c
++#define		bFS_Option				0x60
++#define		bDC_Slope_check		0x80
++#define		bFGuard_Counter_DC_L	0xe00
++#define		bFrame_Weight_Short	0x7000
++#define		bSub_Tune				0xe00000
++#define		bFrame_DC_Length		0xe000000
++#define		bSBD_start_offset		0x30000000
++#define		bFrame_TH_2			0x7
++#define		bFrame_GI2_TH			0x38
++#define		bGI2_Sync_en			0x40
++#define		bSarch_Short_Early		0x300
++#define		bSarch_Short_Late		0xc00
++#define		bSarch_GI2_Late		0x70000
++#define		bCFOAntSum				0x1
++#define		bCFOAcc				0x2
++#define		bCFOStartOffset			0xc
++#define		bCFOLookBack			0x70
++#define		bCFOSumWeight			0x80
++#define		bDAGCEnable			0x10000
++#define		bTXIQImb_A				0x3ff
++#define		bTXIQImb_B				0xfc00
++#define		bTXIQImb_C				0x3f0000
++#define		bTXIQImb_D				0xffc00000
++#define		bTxIDCOffset			0xff
++#define		bTxQDCOffset			0xff00
++#define		bTxDFIRMode			0x10000
++#define		bTxPesudoNoiseOn		0x4000000
++#define		bTxPesudoNoise_A		0xff
++#define		bTxPesudoNoise_B		0xff00
++#define		bTxPesudoNoise_C		0xff0000
++#define		bTxPesudoNoise_D		0xff000000
++#define		bCCADropOption			0x20000
++#define		bCCADropThres			0xfff00000
++#define		bEDCCA_H				0xf
++#define		bEDCCA_L				0xf0
++#define		bLambda_ED			0x300
++#define		bRxInitialGain			0x7f
++#define		bRxAntDivEn				0x80
++#define		bRxAGCAddressForLNA	0x7f00
++#define		bRxHighPowerFlow		0x8000
++#define		bRxAGCFreezeThres		0xc0000
++#define		bRxFreezeStep_AGC1	0x300000
++#define		bRxFreezeStep_AGC2	0xc00000
++#define		bRxFreezeStep_AGC3	0x3000000
++#define		bRxFreezeStep_AGC0	0xc000000
++#define		bRxRssi_Cmp_En			0x10000000
++#define		bRxQuickAGCEn			0x20000000
++#define		bRxAGCFreezeThresMode	0x40000000
++#define		bRxOverFlowCheckType	0x80000000
++#define		bRxAGCShift				0x7f
++#define		bTRSW_Tri_Only			0x80
++#define		bPowerThres			0x300
++#define		bRxAGCEn				0x1
++#define		bRxAGCTogetherEn		0x2
++#define		bRxAGCMin				0x4
++#define		bRxHP_Ini				0x7
++#define		bRxHP_TRLNA			0x70
++#define		bRxHP_RSSI				0x700
++#define		bRxHP_BBP1				0x7000
++#define		bRxHP_BBP2				0x70000
++#define		bRxHP_BBP3				0x700000
++#define		bRSSI_H					0x7f0000     //the threshold for high power
++#define		bRSSI_Gen				0x7f000000   //the threshold for ant diversity
++#define		bRxSettle_TRSW			0x7
++#define		bRxSettle_LNA			0x38
++#define		bRxSettle_RSSI			0x1c0
++#define		bRxSettle_BBP			0xe00
++#define		bRxSettle_RxHP			0x7000
++#define		bRxSettle_AntSW_RSSI	0x38000
++#define		bRxSettle_AntSW		0xc0000
++#define		bRxProcessTime_DAGC	0x300000
++#define		bRxSettle_HSSI			0x400000
++#define		bRxProcessTime_BBPPW	0x800000
++#define		bRxAntennaPowerShift	0x3000000
++#define		bRSSITableSelect		0xc000000
++#define		bRxHP_Final				0x7000000
++#define		bRxHTSettle_BBP			0x7
++#define		bRxHTSettle_HSSI		0x8
++#define		bRxHTSettle_RxHP		0x70
++#define		bRxHTSettle_BBPPW		0x80
++#define		bRxHTSettle_Idle		0x300
++#define		bRxHTSettle_Reserved	0x1c00
++#define		bRxHTRxHPEn			0x8000
++#define		bRxHTAGCFreezeThres	0x30000
++#define		bRxHTAGCTogetherEn	0x40000
++#define		bRxHTAGCMin			0x80000
++#define		bRxHTAGCEn				0x100000
++#define		bRxHTDAGCEn			0x200000
++#define		bRxHTRxHP_BBP			0x1c00000
++#define		bRxHTRxHP_Final		0xe0000000
++#define		bRxPWRatioTH			0x3
++#define		bRxPWRatioEn			0x4
++#define		bRxMFHold				0x3800
++#define		bRxPD_Delay_TH1		0x38
++#define		bRxPD_Delay_TH2		0x1c0
++#define		bRxPD_DC_COUNT_MAX	0x600
++//#define bRxMF_Hold               0x3800
++#define		bRxPD_Delay_TH			0x8000
++#define		bRxProcess_Delay		0xf0000
++#define		bRxSearchrange_GI2_Early	0x700000
++#define		bRxFrame_Guard_Counter_L	0x3800000
++#define		bRxSGI_Guard_L			0xc000000
++#define		bRxSGI_Search_L		0x30000000
++#define		bRxSGI_TH				0xc0000000
++#define		bDFSCnt0				0xff
++#define		bDFSCnt1				0xff00
++#define		bDFSFlag				0xf0000       		
++#define		bMFWeightSum			0x300000
++#define		bMinIdxTH				0x7f000000       		
++#define		bDAFormat				0x40000       		
++#define		bTxChEmuEnable		0x01000000       		
++#define		bTRSWIsolation_A		0x7f
++#define		bTRSWIsolation_B		0x7f00
++#define		bTRSWIsolation_C		0x7f0000
++#define		bTRSWIsolation_D		0x7f000000       		
++#define		bExtLNAGain				0x7c00          
++
++// 6. PageE(0xE00)
++#define		bSTBCEn				0x4	// Useless
++#define		bAntennaMapping		0x10
++#define		bNss					0x20
++#define		bCFOAntSumD			0x200
++#define		bPHYCounterReset		0x8000000
++#define		bCFOReportGet			0x4000000
++#define		bOFDMContinueTx		0x10000000
++#define		bOFDMSingleCarrier		0x20000000
++#define		bOFDMSingleTone		0x40000000
++//#define bRxPath1                 0x01
++//#define bRxPath2                 0x02
++//#define bRxPath3                 0x04
++//#define bRxPath4                 0x08
++//#define bTxPath1                 0x10
++//#define bTxPath2                 0x20
++#define		bHTDetect			0x100
++#define		bCFOEn				0x10000
++#define		bCFOValue			0xfff00000
++#define		bSigTone_Re		0x3f
++#define		bSigTone_Im		0x7f00
++#define		bCounter_CCA		0xffff
++#define		bCounter_ParityFail	0xffff0000
++#define		bCounter_RateIllegal		0xffff
++#define		bCounter_CRC8Fail	0xffff0000
++#define		bCounter_MCSNoSupport	0xffff
++#define		bCounter_FastSync	0xffff
++#define		bShortCFO			0xfff
++#define		bShortCFOTLength	12   //total
++#define		bShortCFOFLength	11   //fraction
++#define		bLongCFO			0x7ff
++#define		bLongCFOTLength	11
++#define		bLongCFOFLength	11
++#define		bTailCFO			0x1fff
++#define		bTailCFOTLength		13
++#define		bTailCFOFLength		12       		
++#define		bmax_en_pwdB		0xffff
++#define		bCC_power_dB		0xffff0000
++#define		bnoise_pwdB		0xffff
++#define		bPowerMeasTLength	10
++#define		bPowerMeasFLength	3
++#define		bRx_HT_BW			0x1
++#define		bRxSC				0x6
++#define		bRx_HT				0x8       		
++#define		bNB_intf_det_on		0x1
++#define		bIntf_win_len_cfg	0x30
++#define		bNB_Intf_TH_cfg		0x1c0       		
++#define		bRFGain				0x3f
++#define		bTableSel			0x40
++#define		bTRSW				0x80       		
++#define		bRxSNR_A			0xff
++#define		bRxSNR_B			0xff00
++#define		bRxSNR_C			0xff0000
++#define		bRxSNR_D			0xff000000
++#define		bSNREVMTLength		8
++#define		bSNREVMFLength		1       		
++#define		bCSI1st				0xff
++#define		bCSI2nd				0xff00
++#define		bRxEVM1st			0xff0000
++#define		bRxEVM2nd			0xff000000       		
++#define		bSIGEVM			0xff
++#define		bPWDB				0xff00
++#define		bSGIEN				0x10000
++       		
++#define		bSFactorQAM1		0xf	// Useless
++#define		bSFactorQAM2		0xf0
++#define		bSFactorQAM3		0xf00
++#define		bSFactorQAM4		0xf000
++#define		bSFactorQAM5		0xf0000
++#define		bSFactorQAM6		0xf0000
++#define		bSFactorQAM7		0xf00000
++#define		bSFactorQAM8		0xf000000
++#define		bSFactorQAM9		0xf0000000
++#define		bCSIScheme			0x100000
++       		
++#define		bNoiseLvlTopSet		0x3	// Useless
++#define		bChSmooth			0x4
++#define		bChSmoothCfg1		0x38
++#define		bChSmoothCfg2		0x1c0
++#define		bChSmoothCfg3		0xe00
++#define		bChSmoothCfg4		0x7000
++#define		bMRCMode			0x800000
++#define		bTHEVMCfg			0x7000000
++       		
++#define		bLoopFitType		0x1	// Useless
++#define		bUpdCFO			0x40
++#define		bUpdCFOOffData		0x80
++#define		bAdvUpdCFO			0x100
++#define		bAdvTimeCtrl		0x800
++#define		bUpdClko			0x1000
++#define		bFC					0x6000
++#define		bTrackingMode		0x8000
++#define		bPhCmpEnable		0x10000
++#define		bUpdClkoLTF		0x20000
++#define		bComChCFO			0x40000
++#define		bCSIEstiMode		0x80000
++#define		bAdvUpdEqz			0x100000
++#define		bUChCfg				0x7000000
++#define		bUpdEqz			0x8000000
++
++//Rx Pseduo noise
++#define		bRxPesudoNoiseOn		0x20000000	// Useless
++#define		bRxPesudoNoise_A		0xff
++#define		bRxPesudoNoise_B		0xff00
++#define		bRxPesudoNoise_C		0xff0000
++#define		bRxPesudoNoise_D		0xff000000
++#define		bPesudoNoiseState_A	0xffff
++#define		bPesudoNoiseState_B	0xffff0000
++#define		bPesudoNoiseState_C	0xffff
++#define		bPesudoNoiseState_D	0xffff0000
++
++//7. RF Register
++//Zebra1
++#define		bZebra1_HSSIEnable		0x8		// Useless
++#define		bZebra1_TRxControl		0xc00
++#define		bZebra1_TRxGainSetting	0x07f
++#define		bZebra1_RxCorner		0xc00
++#define		bZebra1_TxChargePump	0x38
++#define		bZebra1_RxChargePump	0x7
++#define		bZebra1_ChannelNum	0xf80
++#define		bZebra1_TxLPFBW		0x400
++#define		bZebra1_RxLPFBW		0x600
++
++//Zebra4
++#define		bRTL8256RegModeCtrl1	0x100	// Useless
++#define		bRTL8256RegModeCtrl0	0x40
++#define		bRTL8256_TxLPFBW		0x18
++#define		bRTL8256_RxLPFBW		0x600
++
++//RTL8258
++#define		bRTL8258_TxLPFBW		0xc	// Useless
++#define		bRTL8258_RxLPFBW		0xc00
++#define		bRTL8258_RSSILPFBW	0xc0
++
++
++//
++// Other Definition
++//
++
++//byte endable for sb_write
++#define		bByte0				0x1	// Useless
++#define		bByte1				0x2
++#define		bByte2				0x4
++#define		bByte3				0x8
++#define		bWord0				0x3
++#define		bWord1				0xc
++#define		bDWord				0xf
++
++//for PutRegsetting & GetRegSetting BitMask
++#define		bMaskByte0			0xff	// Reg 0xc50 rOFDM0_XAAGCCore~0xC6f
++#define		bMaskByte1			0xff00
++#define		bMaskByte2			0xff0000
++#define		bMaskByte3			0xff000000
++#define		bMaskHWord		0xffff0000
++#define		bMaskLWord			0x0000ffff
++#define		bMaskDWord		0xffffffff
++#define		bMask12Bits			0xfff
++#define		bMaskH4Bits			0xf0000000	
++#define		bMaskOFDM_D		0xffc00000
++#define		bMaskCCK			0x3f3f3f3f
++
++//for PutRFRegsetting & GetRFRegSetting BitMask
++//#define		bMask12Bits               	0xfffff	// RF Reg mask bits
++//#define		bMask20Bits               	0xfffff	// RF Reg mask bits T65 RF
++#define 		bRFRegOffsetMask		0xfffff
++//#define 		bRFRegOffsetMask		0xfff	
++
++//MAC0 will wirte PHY1
++#define	MAC0_ACCESS_PHY1	0x4000
++//MAC1 will wirte PHY0
++#define	MAC1_ACCESS_PHY0	0x2000
++
++#define		bEnable			0x1	// Useless
++#define		bDisable		0x0
++       		
++#define		LeftAntenna		0x0	// Useless
++#define		RightAntenna	0x1
++       		
++#define		tCheckTxStatus		500   //500ms // Useless
++#define		tUpdateRxCounter	100   //100ms
++       		
++#define		rateCCK		0	// Useless
++#define		rateOFDM	1
++#define		rateHT		2
++
++//define Register-End
++#define		bPMAC_End			0x1ff	// Useless
++#define		bFPGAPHY0_End		0x8ff
++#define		bFPGAPHY1_End		0x9ff
++#define		bCCKPHY0_End		0xaff
++#define		bOFDMPHY0_End		0xcff
++#define		bOFDMPHY1_End		0xdff
++
++//define max debug item in each debug page
++//#define bMaxItem_FPGA_PHY0        0x9
++//#define bMaxItem_FPGA_PHY1        0x3
++//#define bMaxItem_PHY_11B          0x16
++//#define bMaxItem_OFDM_PHY0        0x29
++//#define bMaxItem_OFDM_PHY1        0x0
++
++#define		bPMACControl		0x0		// Useless
++#define		bWMACControl		0x1
++#define		bWNICControl		0x2
++       		
++#define		PathA			0x0	// Useless
++#define		PathB			0x1
++#define		PathC			0x2
++#define		PathD			0x3
++
++/*--------------------------Define Parameters-------------------------------*/
++
++
++#endif	//__INC_HAL8192SPHYREG_H
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/Hal8192DUHWImg.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/Hal8192DUHWImg.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/Hal8192DUHWImg.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/Hal8192DUHWImg.h	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,66 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __INC_HAL8192DU_FW_IMG_H
++#define __INC_HAL8192DU_FW_IMG_H
++
++#include <basic_types.h>
++
++/*Created on  2011/11/11,  8: 8*/
++
++#define Rtl8192DUImgArrayLength 31452
++extern const u8 Rtl8192DUFwImgArray[Rtl8192DUImgArrayLength];
++#define Rtl8192DUMainArrayLength 1
++extern const u8 Rtl8192DUFwMainArray[Rtl8192DUMainArrayLength];
++#define Rtl8192DUDataArrayLength 1
++extern const u8 Rtl8192DUFwDataArray[Rtl8192DUDataArrayLength];
++#define Rtl8192DUPHY_REG_2TArrayLength 372
++extern const u32 Rtl8192DUPHY_REG_2TArray[Rtl8192DUPHY_REG_2TArrayLength];
++#define Rtl8192DUPHY_REG_1TArrayLength 1
++extern const u32 Rtl8192DUPHY_REG_1TArray[Rtl8192DUPHY_REG_1TArrayLength];
++#define Rtl8192DUPHY_REG_Array_PGLength 624
++extern const u32 Rtl8192DUPHY_REG_Array_PG[Rtl8192DUPHY_REG_Array_PGLength];
++#define Rtl8192DUPHY_REG_Array_MPLength 14
++extern const u32 Rtl8192DUPHY_REG_Array_MP[Rtl8192DUPHY_REG_Array_MPLength];
++#define Rtl8192DURadioA_2TArrayLength 378
++extern const u32 Rtl8192DURadioA_2TArray[Rtl8192DURadioA_2TArrayLength];
++#define Rtl8192DURadioB_2TArrayLength 384
++extern const u32 Rtl8192DURadioB_2TArray[Rtl8192DURadioB_2TArrayLength];
++#define Rtl8192DURadioA_1TArrayLength 1
++extern const u32 Rtl8192DURadioA_1TArray[Rtl8192DURadioA_1TArrayLength];
++#define Rtl8192DURadioB_1TArrayLength 1
++extern const u32 Rtl8192DURadioB_1TArray[Rtl8192DURadioB_1TArrayLength];
++#define Rtl8192DURadioA_2T_intPAArrayLength 378
++extern const u32 Rtl8192DURadioA_2T_intPAArray[Rtl8192DURadioA_2T_intPAArrayLength];
++#define Rtl8192DURadioB_2T_intPAArrayLength 384
++extern const u32 Rtl8192DURadioB_2T_intPAArray[Rtl8192DURadioB_2T_intPAArrayLength];
++#define Rtl8192DUMAC_2T_ArrayLength 192
++extern const u32 Rtl8192DUMAC_2T_Array[Rtl8192DUMAC_2T_ArrayLength];
++#define Rtl8192DUAGCTAB_ArrayLength 386
++extern const u32 Rtl8192DUAGCTAB_Array[Rtl8192DUAGCTAB_ArrayLength];
++#define Rtl8192DUAGCTAB_5GArrayLength 194
++extern const u32 Rtl8192DUAGCTAB_5GArray[Rtl8192DUAGCTAB_5GArrayLength];
++#define Rtl8192DUAGCTAB_2GArrayLength 194
++extern const u32 Rtl8192DUAGCTAB_2GArray[Rtl8192DUAGCTAB_2GArrayLength];
++#define Rtl8192DUAGCTAB_2TArrayLength 1
++extern const u32 Rtl8192DUAGCTAB_2TArray[Rtl8192DUAGCTAB_2TArrayLength];
++#define Rtl8192DUAGCTAB_1TArrayLength 1
++extern const u32 Rtl8192DUAGCTAB_1TArray[Rtl8192DUAGCTAB_1TArrayLength];
++
++#endif //__INC_HAL8192CU_FW_IMG_H
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/Hal8192DUHWImg_wowlan.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/Hal8192DUHWImg_wowlan.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/Hal8192DUHWImg_wowlan.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/Hal8192DUHWImg_wowlan.h	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,30 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __INC_HAL8192DU_FW_IMG_WOWLAN_H
++#define __INC_HAL8192DU_FW_IMG_WOWLAN_H
++
++/*Created on  2011/11/ 8, 14:15*/
++
++
++#define DUWWImgArrayLength 24818
++extern u8 Rtl8192DUFwWWImgArray[DUWWImgArrayLength];
++
++#endif //__INC_HAL8192DU_FW_IMG_WOWLAN_H
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/hal_com.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/hal_com.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/hal_com.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/hal_com.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,146 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __HAL_COMMON_H__
++#define __HAL_COMMON_H__
++
++//CCK
++#define RATE_1M						BIT(0)
++#define RATE_2M						BIT(1)
++#define RATE_5_5M					BIT(2)
++#define RATE_11M					BIT(3)
++//OFDM 
++#define RATE_6M						BIT(4)
++#define RATE_9M						BIT(5)
++#define RATE_12M					BIT(6)
++#define RATE_18M					BIT(7)
++#define RATE_24M					BIT(8)
++#define RATE_36M					BIT(9)
++#define RATE_48M					BIT(10)
++#define RATE_54M					BIT(11)
++//MCS 1 Spatial Stream
++#define RATE_MCS0					BIT(12)
++#define RATE_MCS1					BIT(13)
++#define RATE_MCS2					BIT(14)
++#define RATE_MCS3					BIT(15)
++#define RATE_MCS4					BIT(16)
++#define RATE_MCS5					BIT(17)
++#define RATE_MCS6					BIT(18)
++#define RATE_MCS7					BIT(19)
++//MCS 2 Spatial Stream
++#define RATE_MCS8					BIT(20)
++#define RATE_MCS9					BIT(21)
++#define RATE_MCS10					BIT(22)
++#define RATE_MCS11					BIT(23)
++#define RATE_MCS12					BIT(24)
++#define RATE_MCS13					BIT(25)
++#define RATE_MCS14					BIT(26)
++#define RATE_MCS15					BIT(27)
++
++// ALL CCK Rate
++#define	RATE_ALL_CCK				RATR_1M|RATR_2M|RATR_55M|RATR_11M 
++#define	RATE_ALL_OFDM_AG			RATR_6M|RATR_9M|RATR_12M|RATR_18M|RATR_24M|\
++									RATR_36M|RATR_48M|RATR_54M	
++#define	RATE_ALL_OFDM_1SS			RATR_MCS0|RATR_MCS1|RATR_MCS2|RATR_MCS3 |\
++									RATR_MCS4|RATR_MCS5|RATR_MCS6	|RATR_MCS7	
++#define	RATE_ALL_OFDM_2SS			RATR_MCS8|RATR_MCS9	|RATR_MCS10|RATR_MCS11|\
++									RATR_MCS12|RATR_MCS13|RATR_MCS14|RATR_MCS15
++
++/*------------------------------ Tx Desc definition Macro ------------------------*/ 
++//#pragma mark -- Tx Desc related definition. --
++//----------------------------------------------------------------------------
++//-----------------------------------------------------------
++//	Rate
++//-----------------------------------------------------------
++// CCK Rates, TxHT = 0
++#define DESC_RATE1M				0x00
++#define DESC_RATE2M				0x01
++#define DESC_RATE5_5M				0x02
++#define DESC_RATE11M				0x03
++
++// OFDM Rates, TxHT = 0
++#define DESC_RATE6M				0x04
++#define DESC_RATE9M				0x05
++#define DESC_RATE12M				0x06
++#define DESC_RATE18M				0x07
++#define DESC_RATE24M				0x08
++#define DESC_RATE36M				0x09
++#define DESC_RATE48M				0x0a
++#define DESC_RATE54M				0x0b
++
++// MCS Rates, TxHT = 1
++#define DESC_RATEMCS0				0x0c
++#define DESC_RATEMCS1				0x0d
++#define DESC_RATEMCS2				0x0e
++#define DESC_RATEMCS3				0x0f
++#define DESC_RATEMCS4				0x10
++#define DESC_RATEMCS5				0x11
++#define DESC_RATEMCS6				0x12
++#define DESC_RATEMCS7				0x13
++#define DESC_RATEMCS8				0x14
++#define DESC_RATEMCS9				0x15
++#define DESC_RATEMCS10				0x16
++#define DESC_RATEMCS11				0x17
++#define DESC_RATEMCS12				0x18
++#define DESC_RATEMCS13				0x19
++#define DESC_RATEMCS14				0x1a
++#define DESC_RATEMCS15				0x1b
++#define DESC_RATEMCS15_SG			0x1c
++#define DESC_RATEMCS32				0x20
++
++//============================================================
++// Global var
++//============================================================
++#define	OFDM_TABLE_SIZE_92C 	37
++#define	OFDM_TABLE_SIZE_92D 	43
++#define	CCK_TABLE_SIZE		33
++
++extern u32 OFDMSwingTable[OFDM_TABLE_SIZE_92D] ;
++
++extern u8 CCKSwingTable_Ch1_Ch13[CCK_TABLE_SIZE][8];
++
++extern u8 CCKSwingTable_Ch14 [CCK_TABLE_SIZE][8];
++
++#ifdef CONFIG_CHIP_VER_INTEGRATION
++void dump_chip_info(HAL_VERSION	ChipVersion);
++#endif
++
++u8	//return the final channel plan decision
++hal_com_get_channel_plan(
++	IN	PADAPTER	padapter,
++	IN	u8			hw_channel_plan,	//channel plan from HW (efuse/eeprom)
++	IN	u8			sw_channel_plan,	//channel plan from SW (registry/module param)
++	IN	u8			def_channel_plan,	//channel plan used when the former two is invalid
++	IN	BOOLEAN		AutoLoadFail
++	);
++
++void	HalSetBrateCfg(
++	IN PADAPTER		Adapter,
++	IN u8			*mBratesOS,
++	OUT u16			*pBrateCfg);
++
++u8	MRateToHwRate(u8 rate);
++
++void hal_init_macaddr(_adapter *adapter);
++
++void c2h_evt_clear(_adapter *adapter);
++s32 c2h_evt_read(_adapter *adapter, u8 *buf);
++
++#endif //__HAL_COMMON_H__
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/hal_intf.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/hal_intf.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/hal_intf.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/hal_intf.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,432 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __HAL_INTF_H__
++#define __HAL_INTF_H__
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++
++#ifdef CONFIG_PCI_HCI
++#include <pci_hal.h>
++#endif
++
++
++enum RTL871X_HCI_TYPE {
++
++	RTW_SDIO,
++	RTW_USB,
++	RTW_PCIE
++};
++
++enum _CHIP_TYPE {
++
++	NULL_CHIP_TYPE,
++	RTL8712_8188S_8191S_8192S,
++	RTL8188C_8192C,
++	RTL8192D,
++	RTL8723A,
++	RTL8188E,	
++	MAX_CHIP_TYPE
++};
++
++
++typedef enum _HW_VARIABLES{
++	HW_VAR_MEDIA_STATUS,
++	HW_VAR_MEDIA_STATUS1,
++	HW_VAR_SET_OPMODE,
++	HW_VAR_MAC_ADDR,
++	HW_VAR_BSSID,
++	HW_VAR_INIT_RTS_RATE,
++	HW_VAR_INIT_DATA_RATE,
++	HW_VAR_BASIC_RATE,
++	HW_VAR_TXPAUSE,
++	HW_VAR_BCN_FUNC,
++	HW_VAR_CORRECT_TSF,
++	HW_VAR_CHECK_BSSID,
++	HW_VAR_MLME_DISCONNECT,
++	HW_VAR_MLME_SITESURVEY,
++	HW_VAR_MLME_JOIN,
++	HW_VAR_ON_RCR_AM,
++	HW_VAR_OFF_RCR_AM,
++	HW_VAR_BEACON_INTERVAL,
++	HW_VAR_SLOT_TIME,
++	HW_VAR_RESP_SIFS,
++	HW_VAR_ACK_PREAMBLE,
++	HW_VAR_SEC_CFG,
++	HW_VAR_BCN_VALID,
++	HW_VAR_RF_TYPE,
++	HW_VAR_DM_FLAG,
++	HW_VAR_DM_FUNC_OP,
++	HW_VAR_DM_FUNC_SET,
++	HW_VAR_DM_FUNC_CLR,
++	HW_VAR_DM_INIT_PWDB,
++	HW_VAR_CAM_EMPTY_ENTRY,
++	HW_VAR_CAM_INVALID_ALL,
++	HW_VAR_CAM_WRITE,
++	HW_VAR_CAM_READ,
++	HW_VAR_AC_PARAM_VO,
++	HW_VAR_AC_PARAM_VI,
++	HW_VAR_AC_PARAM_BE,
++	HW_VAR_AC_PARAM_BK,
++	HW_VAR_ACM_CTRL,
++	HW_VAR_AMPDU_MIN_SPACE,
++	HW_VAR_AMPDU_FACTOR,
++	HW_VAR_RXDMA_AGG_PG_TH,
++	HW_VAR_SET_RPWM,
++	HW_VAR_H2C_FW_PWRMODE,
++	HW_VAR_H2C_FW_JOINBSSRPT,
++	HW_VAR_FWLPS_RF_ON,
++	HW_VAR_H2C_FW_P2P_PS_OFFLOAD,
++	HW_VAR_TDLS_WRCR,
++	HW_VAR_TDLS_INIT_CH_SEN,
++	HW_VAR_TDLS_RS_RCR,
++	HW_VAR_TDLS_DONE_CH_SEN,	
++	HW_VAR_INITIAL_GAIN,
++	HW_VAR_TRIGGER_GPIO_0,
++	HW_VAR_BT_SET_COEXIST,
++	HW_VAR_BT_ISSUE_DELBA,	
++	HW_VAR_CURRENT_ANTENNA,
++	HW_VAR_ANTENNA_DIVERSITY_LINK,
++	HW_VAR_ANTENNA_DIVERSITY_SELECT,
++	HW_VAR_SWITCH_EPHY_WoWLAN,
++	HW_VAR_EFUSE_BYTES,
++	HW_VAR_FIFO_CLEARN_UP,
++	HW_VAR_CHECK_TXBUF,
++	HW_VAR_APFM_ON_MAC, //Auto FSM to Turn On, include clock, isolation, power control for MAC only
++	HW_VAR_WOWLAN,
++	HW_VAR_VID,
++	HW_VAR_PID,
++	HW_VAR_MBSSID_CAM_WRITE,
++	HW_VAR_MBSSID_CAM_CLEAR,
++	HW_VAR_RCR_MBSSID_EN,
++	HW_VAR_USB_RXAGG_PAGE_TO,
++}HW_VARIABLES;
++
++typedef enum _HAL_DEF_VARIABLE{
++	HAL_DEF_UNDERCORATEDSMOOTHEDPWDB,
++	HAL_DEF_IS_SUPPORT_ANT_DIV,
++	HAL_DEF_CURRENT_ANTENNA,
++	HAL_DEF_DRVINFO_SZ,
++	HAL_DEF_MAX_RECVBUF_SZ,
++	HAL_DEF_RX_PACKET_OFFSET,
++	HAL_DEF_DBG_DUMP_RXPKT,//for dbg
++	HAL_DEF_DBG_DM_FUNC,//for dbg
++	HAL_DEF_DUAL_MAC_MODE,
++}HAL_DEF_VARIABLE;
++
++typedef enum _HAL_INTF_PS_FUNC{
++	HAL_USB_SELECT_SUSPEND,
++	HAL_MAX_ID,
++}HAL_INTF_PS_FUNC;
++
++typedef s32 (*c2h_id_filter)(u8 id);
++
++struct hal_ops {
++	u32	(*hal_init)(PADAPTER Adapter);
++	u32	(*hal_deinit)(PADAPTER Adapter);
++
++	void	(*free_hal_data)(PADAPTER Adapter);
++
++	u32	(*inirp_init)(PADAPTER Adapter);
++	u32	(*inirp_deinit)(PADAPTER Adapter);
++
++	s32	(*init_xmit_priv)(PADAPTER Adapter);
++	void	(*free_xmit_priv)(PADAPTER Adapter);
++
++	s32	(*init_recv_priv)(PADAPTER Adapter);
++	void	(*free_recv_priv)(PADAPTER Adapter);
++
++	void	(*InitSwLeds)(PADAPTER Adapter);
++	void	(*DeInitSwLeds)(PADAPTER Adapter);
++
++	void	(*dm_init)(PADAPTER Adapter);
++	void	(*dm_deinit)(PADAPTER Adapter);
++	void	(*read_chip_version)(PADAPTER Adapter);
++
++	void	(*init_default_value)(PADAPTER Adapter);
++
++	void	(*intf_chip_configure)(PADAPTER Adapter);
++
++	void	(*read_adapter_info)(PADAPTER Adapter);
++
++	void	(*enable_interrupt)(PADAPTER Adapter);
++	void	(*disable_interrupt)(PADAPTER Adapter);
++	s32	(*interrupt_handler)(PADAPTER Adapter);
++
++	void	(*set_bwmode_handler)(PADAPTER Adapter, HT_CHANNEL_WIDTH Bandwidth, u8 Offset);
++	void	(*set_channel_handler)(PADAPTER Adapter, u8 channel);
++
++	void	(*hal_dm_watchdog)(PADAPTER Adapter);
++
++	void	(*SetHwRegHandler)(PADAPTER Adapter, u8	variable,u8* val);
++	void	(*GetHwRegHandler)(PADAPTER Adapter, u8	variable,u8* val);
++
++	u8	(*GetHalDefVarHandler)(PADAPTER Adapter, HAL_DEF_VARIABLE eVariable, PVOID pValue);
++	u8	(*SetHalDefVarHandler)(PADAPTER Adapter, HAL_DEF_VARIABLE eVariable, PVOID pValue);
++
++	void	(*UpdateRAMaskHandler)(PADAPTER Adapter, u32 mac_id);
++	void	(*SetBeaconRelatedRegistersHandler)(PADAPTER Adapter);
++
++	void	(*Add_RateATid)(PADAPTER Adapter, u32 bitmap, u8 arg);
++
++#ifdef CONFIG_ANTENNA_DIVERSITY
++	u8	(*AntDivBeforeLinkHandler)(PADAPTER Adapter);
++	void	(*AntDivCompareHandler)(PADAPTER Adapter, WLAN_BSSID_EX *dst, WLAN_BSSID_EX *src);
++#endif
++	u8	(*interface_ps_func)(PADAPTER Adapter,HAL_INTF_PS_FUNC efunc_id, u8* val);
++
++	s32	(*hal_xmit)(PADAPTER Adapter, struct xmit_frame *pxmitframe);
++	s32	(*mgnt_xmit)(PADAPTER Adapter, struct xmit_frame *pmgntframe);
++        s32	(*hal_xmitframe_enqueue)(_adapter *padapter, struct xmit_frame *pxmitframe);
++
++	u32	(*read_bbreg)(PADAPTER Adapter, u32 RegAddr, u32 BitMask);
++	void	(*write_bbreg)(PADAPTER Adapter, u32 RegAddr, u32 BitMask, u32 Data);
++	u32	(*read_rfreg)(PADAPTER Adapter, u32 eRFPath, u32 RegAddr, u32 BitMask);
++	void	(*write_rfreg)(PADAPTER Adapter, u32 eRFPath, u32 RegAddr, u32 BitMask, u32 Data);
++
++#ifdef CONFIG_HOSTAPD_MLME
++	s32	(*hostap_mgnt_xmit_entry)(PADAPTER Adapter, _pkt *pkt);
++#endif
++	void (*EfusePowerSwitch)(PADAPTER pAdapter, u8 bWrite, u8 PwrState);
++	void (*ReadEFuse)(PADAPTER Adapter, u8 efuseType, u16 _offset, u16 _size_byte, u8 *pbuf, BOOLEAN bPseudoTest);
++	void (*EFUSEGetEfuseDefinition)(PADAPTER pAdapter, u8 efuseType, u8 type, PVOID *pOut, BOOLEAN bPseudoTest);
++	u16	(*EfuseGetCurrentSize)(PADAPTER pAdapter, u8 efuseType, BOOLEAN bPseudoTest);
++	int 	(*Efuse_PgPacketRead)(PADAPTER pAdapter, u8 offset, u8 *data, BOOLEAN bPseudoTest);
++	int 	(*Efuse_PgPacketWrite)(PADAPTER pAdapter, u8 offset, u8 word_en, u8 *data, BOOLEAN bPseudoTest);
++	u8	(*Efuse_WordEnableDataWrite)(PADAPTER pAdapter, u16 efuse_addr, u8 word_en, u8 *data, BOOLEAN bPseudoTest);
++	
++#ifdef DBG_CONFIG_ERROR_DETECT
++	void (*sreset_init_value)(_adapter *padapter);
++	void (*sreset_reset_value)(_adapter *padapter);		
++	void (*silentreset)(_adapter *padapter);
++	void (*sreset_xmit_status_check)(_adapter *padapter);
++	void (*sreset_linked_status_check) (_adapter *padapter);
++	u8 (*sreset_get_wifi_status)(_adapter *padapter);
++	bool (*sreset_inprogress)(_adapter *padapter);
++#endif
++
++#ifdef CONFIG_IOL
++	int (*IOL_exec_cmds_sync)(ADAPTER *adapter, struct xmit_frame *xmit_frame, u32 max_wating_ms);
++#endif
++	void (*hal_notch_filter)(_adapter * adapter, bool enable);
++	void (*hal_reset_security_engine)(_adapter * adapter);
++
++	s32 (*c2h_handler)(_adapter *padapter, struct c2h_evt_hdr *c2h_evt);
++	c2h_id_filter c2h_id_filter_ccx;
++};
++
++typedef	enum _RT_EEPROM_TYPE{
++	EEPROM_93C46,
++	EEPROM_93C56,
++	EEPROM_BOOT_EFUSE,
++}RT_EEPROM_TYPE,*PRT_EEPROM_TYPE;
++
++#define USB_HIGH_SPEED_BULK_SIZE	512
++#define USB_FULL_SPEED_BULK_SIZE	64
++
++#define RF_CHANGE_BY_INIT	0
++#define RF_CHANGE_BY_IPS 	BIT28
++#define RF_CHANGE_BY_PS 	BIT29
++#define RF_CHANGE_BY_HW 	BIT30
++#define RF_CHANGE_BY_SW 	BIT31
++
++typedef enum _HARDWARE_TYPE{
++	HARDWARE_TYPE_RTL8180,
++	HARDWARE_TYPE_RTL8185,
++	HARDWARE_TYPE_RTL8187,
++	HARDWARE_TYPE_RTL8188,
++	HARDWARE_TYPE_RTL8190P,
++	HARDWARE_TYPE_RTL8192E,
++	HARDWARE_TYPE_RTL819xU,
++	HARDWARE_TYPE_RTL8192SE,
++	HARDWARE_TYPE_RTL8192SU,
++	HARDWARE_TYPE_RTL8192CE,
++	HARDWARE_TYPE_RTL8192CU,
++	HARDWARE_TYPE_RTL8192DE,
++	HARDWARE_TYPE_RTL8192DU,
++	HARDWARE_TYPE_RTL8723AE,
++	HARDWARE_TYPE_RTL8723AU,
++	HARDWARE_TYPE_RTL8723AS,
++	HARDWARE_TYPE_RTL8188EE,
++	HARDWARE_TYPE_RTL8188EU,
++	HARDWARE_TYPE_RTL8188ES,
++	HARDWARE_TYPE_MAX,
++}HARDWARE_TYPE;
++
++//
++// RTL8192C Series
++//
++#define IS_HARDWARE_TYPE_8192CE(_Adapter)	(((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8192CE)
++#define IS_HARDWARE_TYPE_8192CU(_Adapter)	(((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8192CU)
++#define	IS_HARDWARE_TYPE_8192C(_Adapter)			\
++(IS_HARDWARE_TYPE_8192CE(_Adapter) || IS_HARDWARE_TYPE_8192CU(_Adapter))
++
++//
++// RTL8192D Series
++//
++#define IS_HARDWARE_TYPE_8192DE(_Adapter)	(((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8192DE)
++#define IS_HARDWARE_TYPE_8192DU(_Adapter)	(((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8192DU)
++#define	IS_HARDWARE_TYPE_8192D(_Adapter)			\
++(IS_HARDWARE_TYPE_8192DE(_Adapter) || IS_HARDWARE_TYPE_8192DU(_Adapter))
++
++//
++// RTL8723A Series
++//
++#define IS_HARDWARE_TYPE_8723AE(_Adapter)	(((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8723AE)
++#define IS_HARDWARE_TYPE_8723AU(_Adapter)	(((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8723AU)
++#define IS_HARDWARE_TYPE_8723AS(_Adapter)	(((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8723AS)
++#define	IS_HARDWARE_TYPE_8723A(_Adapter)	\
++(IS_HARDWARE_TYPE_8723AE(_Adapter) || IS_HARDWARE_TYPE_8723AU(_Adapter) || IS_HARDWARE_TYPE_8723AS(_Adapter))
++
++//
++// RTL8188E Series
++//
++#define IS_HARDWARE_TYPE_8188EE(_Adapter)	(((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8188EE)
++#define IS_HARDWARE_TYPE_8188EU(_Adapter)	(((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8188EU)
++#define IS_HARDWARE_TYPE_8188ES(_Adapter)	(((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8188ES)
++#define	IS_HARDWARE_TYPE_8188E(_Adapter)	\
++(IS_HARDWARE_TYPE_8188EE(_Adapter) || IS_HARDWARE_TYPE_8188EU(_Adapter) || IS_HARDWARE_TYPE_8188ES(_Adapter))
++
++
++typedef struct eeprom_priv EEPROM_EFUSE_PRIV, *PEEPROM_EFUSE_PRIV;
++#define GET_EEPROM_EFUSE_PRIV(priv)	(&priv->eeprompriv)
++
++#ifdef CONFIG_WOWLAN
++typedef enum _wowlan_subcode{
++	WOWLAN_PATTERN_MATCH = 1,
++	WOWLAN_MAGIC_PACKET  = 2,
++	WOWLAN_UNICAST       = 3,
++	WOWLAN_SET_PATTERN   = 4,
++	WOWLAN_DUMP_REG      = 5,
++	WOWLAN_ENABLE        = 6,
++	WOWLAN_DISABLE       = 7,
++	WOWLAN_STATUS		= 8,
++	WOWLAN_DEBUG_RELOAD_FW	= 9,
++	WOWLAN_DEBUG_1		=10,
++	WOWLAN_DEBUG_2		=11
++}wowlan_subcode;
++
++struct wowlan_ioctl_param{
++	unsigned int subcode;
++	unsigned int subcode_value;
++	unsigned int wakeup_reason;
++	unsigned int len;
++	unsigned char pattern[0];
++};
++
++#define Rx_Pairwisekey			BIT(0)
++#define Rx_GTK					BIT(1)
++#define Rx_DisAssoc				BIT(2)
++#define Rx_DeAuth				BIT(3)
++#define FWDecisionDisconnect	BIT(4)
++#define Rx_MagicPkt				BIT(5)
++#define FinishBtFwPatch			BIT(7)
++
++#endif // CONFIG_WOWLAN
++
++void rtw_hal_def_value_init(_adapter *padapter);
++void rtw_hal_free_data(_adapter *padapter);
++
++void rtw_hal_dm_init(_adapter *padapter);
++void rtw_hal_dm_deinit(_adapter *padapter);
++void rtw_hal_sw_led_init(_adapter *padapter);
++void rtw_hal_sw_led_deinit(_adapter *padapter);
++
++uint rtw_hal_init(_adapter *padapter);
++uint rtw_hal_deinit(_adapter *padapter);
++void rtw_hal_stop(_adapter *padapter);
++
++void rtw_hal_set_hwreg(PADAPTER padapter, u8 variable, u8 *val);
++void rtw_hal_get_hwreg(PADAPTER padapter, u8 variable, u8 *val);
++
++void rtw_hal_chip_configure(_adapter *padapter);
++void rtw_hal_read_chip_info(_adapter *padapter);
++void rtw_hal_read_chip_version(_adapter *padapter);
++
++u8 rtw_hal_set_def_var(_adapter *padapter, HAL_DEF_VARIABLE eVariable, PVOID pValue);
++u8 rtw_hal_get_def_var(_adapter *padapter, HAL_DEF_VARIABLE eVariable, PVOID pValue);
++
++void rtw_hal_enable_interrupt(_adapter *padapter);
++void rtw_hal_disable_interrupt(_adapter *padapter);
++
++u32 rtw_hal_inirp_init(_adapter *padapter);
++u32 rtw_hal_inirp_deinit(_adapter *padapter);
++
++u8 rtw_hal_intf_ps_func(_adapter *padapter,HAL_INTF_PS_FUNC efunc_id, u8* val);
++
++s32	rtw_hal_xmitframe_enqueue(_adapter *padapter, struct xmit_frame *pxmitframe);
++s32 rtw_hal_xmit(_adapter *padapter, struct xmit_frame *pxmitframe);
++s32 rtw_hal_mgnt_xmit(_adapter *padapter, struct xmit_frame *pmgntframe);
++
++s32 rtw_hal_init_xmit_priv(_adapter *padapter);
++void rtw_hal_free_xmit_priv(_adapter *padapter);
++
++s32 rtw_hal_init_recv_priv(_adapter *padapter);
++void rtw_hal_free_recv_priv(_adapter *padapter);
++
++void rtw_hal_update_ra_mask(_adapter *padapter, u32 mac_id);
++void rtw_hal_add_ra_tid(_adapter *padapter, u32 bitmap, u8 arg);
++
++void rtw_hal_bcn_related_reg_setting(_adapter *padapter);
++
++u32 rtw_hal_read_bbreg(_adapter *padapter, u32 RegAddr, u32 BitMask);
++void rtw_hal_write_bbreg(_adapter *padapter, u32 RegAddr, u32 BitMask, u32 Data);
++u32 rtw_hal_read_rfreg(_adapter *padapter, u32 eRFPath, u32 RegAddr, u32 BitMask);
++void rtw_hal_write_rfreg(_adapter *padapter, u32 eRFPath, u32 RegAddr, u32 BitMask, u32 Data);
++
++s32 rtw_hal_interrupt_handler(_adapter *padapter);
++
++void rtw_hal_set_bwmode(_adapter *padapter, HT_CHANNEL_WIDTH Bandwidth, u8 Offset);
++void rtw_hal_set_chan(_adapter *padapter, u8 channel);
++
++void rtw_hal_dm_watchdog(_adapter *padapter);
++
++#ifdef CONFIG_ANTENNA_DIVERSITY
++u8 rtw_hal_antdiv_before_linked(_adapter *padapter);
++void rtw_hal_antdiv_rssi_compared(_adapter *padapter, WLAN_BSSID_EX *dst, WLAN_BSSID_EX *src);
++#endif
++
++#ifdef CONFIG_HOSTAPD_MLME
++s32 rtw_hal_hostap_mgnt_xmit_entry(_adapter *padapter, _pkt *pkt);
++#endif
++
++#ifdef DBG_CONFIG_ERROR_DETECT
++void rtw_hal_sreset_init(_adapter *padapter);
++void rtw_hal_sreset_reset(_adapter *padapter);
++void rtw_hal_sreset_reset_value(_adapter *padapter);
++void rtw_hal_sreset_xmit_status_check(_adapter *padapter);
++void rtw_hal_sreset_linked_status_check(_adapter *padapter);
++u8 rtw_hal_sreset_get_wifi_status(_adapter *padapter);
++bool rtw_hal_sreset_inprogress(_adapter *padapter);
++#endif
++
++#ifdef CONFIG_IOL
++int rtw_hal_iol_cmd(ADAPTER *adapter, struct xmit_frame *xmit_frame, u32 max_wating_ms);
++#endif
++
++void rtw_hal_notch_filter(_adapter * adapter, bool enable);
++void rtw_hal_reset_security_engine(_adapter * adapter);
++
++s32 rtw_hal_c2h_handler(_adapter *adapter, struct c2h_evt_hdr *c2h_evt);
++c2h_id_filter rtw_hal_c2h_id_filter_ccx(_adapter *adapter);
++
++#endif //__HAL_INTF_H__
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/HalPwrSeqCmd.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/HalPwrSeqCmd.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/HalPwrSeqCmd.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/HalPwrSeqCmd.h	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,137 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __HALPWRSEQCMD_H__
++#define __HALPWRSEQCMD_H__
++
++#include <drv_types.h>
++
++/*---------------------------------------------*/
++//3 The value of cmd: 4 bits
++/*---------------------------------------------*/
++#define PWR_CMD_READ			0x00
++     // offset: the read register offset
++     // msk: the mask of the read value
++     // value: N/A, left by 0
++     // note: dirver shall implement this function by read & msk
++
++#define PWR_CMD_WRITE			0x01
++     // offset: the read register offset
++     // msk: the mask of the write bits
++     // value: write value
++     // note: driver shall implement this cmd by read & msk after write
++
++#define PWR_CMD_POLLING			0x02
++     // offset: the read register offset
++     // msk: the mask of the polled value
++     // value: the value to be polled, masked by the msd field.
++     // note: driver shall implement this cmd by
++     // do{
++     // if( (Read(offset) & msk) == (value & msk) )
++     // break;
++     // } while(not timeout);
++
++#define PWR_CMD_DELAY			0x03
++     // offset: the value to delay
++     // msk: N/A
++     // value: the unit of delay, 0: us, 1: ms
++
++#define PWR_CMD_END				0x04
++     // offset: N/A
++     // msk: N/A
++     // value: N/A
++
++/*---------------------------------------------*/
++//3 The value of base: 4 bits
++/*---------------------------------------------*/
++   // define the base address of each block
++#define PWR_BASEADDR_MAC		0x00
++#define PWR_BASEADDR_USB		0x01
++#define PWR_BASEADDR_PCIE		0x02
++#define PWR_BASEADDR_SDIO		0x03
++
++/*---------------------------------------------*/
++//3 The value of interface_msk: 4 bits
++/*---------------------------------------------*/
++#define	PWR_INTF_SDIO_MSK		BIT(0)
++#define	PWR_INTF_USB_MSK		BIT(1)
++#define	PWR_INTF_PCI_MSK		BIT(2)
++#define	PWR_INTF_ALL_MSK		(BIT(0)|BIT(1)|BIT(2)|BIT(3))
++
++/*---------------------------------------------*/
++//3 The value of fab_msk: 4 bits
++/*---------------------------------------------*/
++#define	PWR_FAB_TSMC_MSK		BIT(0)
++#define	PWR_FAB_UMC_MSK			BIT(1)
++#define	PWR_FAB_ALL_MSK			(BIT(0)|BIT(1)|BIT(2)|BIT(3))
++
++/*---------------------------------------------*/
++//3 The value of cut_msk: 8 bits
++/*---------------------------------------------*/
++#define	PWR_CUT_TESTCHIP_MSK	BIT(0)
++#define	PWR_CUT_A_MSK			BIT(1)
++#define	PWR_CUT_B_MSK			BIT(2)
++#define	PWR_CUT_C_MSK			BIT(3)
++#define	PWR_CUT_D_MSK			BIT(4)
++#define	PWR_CUT_E_MSK			BIT(5)
++#define	PWR_CUT_F_MSK			BIT(6)
++#define	PWR_CUT_G_MSK			BIT(7)
++#define	PWR_CUT_ALL_MSK			0xFF
++
++
++typedef enum _PWRSEQ_CMD_DELAY_UNIT_
++{
++	PWRSEQ_DELAY_US,
++	PWRSEQ_DELAY_MS,
++} PWRSEQ_DELAY_UNIT;
++
++typedef struct _WL_PWR_CFG_
++{
++	u16 offset;
++	u8 cut_msk;
++	u8 fab_msk:4;
++	u8 interface_msk:4;
++	u8 base:4;
++	u8 cmd:4;
++	u8 msk;
++	u8 value;
++} WLAN_PWR_CFG, *PWLAN_PWR_CFG;
++
++
++#define GET_PWR_CFG_OFFSET(__PWR_CMD)		__PWR_CMD.offset
++#define GET_PWR_CFG_CUT_MASK(__PWR_CMD)		__PWR_CMD.cut_msk
++#define GET_PWR_CFG_FAB_MASK(__PWR_CMD)		__PWR_CMD.fab_msk
++#define GET_PWR_CFG_INTF_MASK(__PWR_CMD)	__PWR_CMD.interface_msk
++#define GET_PWR_CFG_BASE(__PWR_CMD)			__PWR_CMD.base
++#define GET_PWR_CFG_CMD(__PWR_CMD)			__PWR_CMD.cmd
++#define GET_PWR_CFG_MASK(__PWR_CMD)			__PWR_CMD.msk
++#define GET_PWR_CFG_VALUE(__PWR_CMD)		__PWR_CMD.value
++
++
++//================================================================================
++//	Prototype of protected function.
++//================================================================================
++u8 HalPwrSeqCmdParsing(
++	PADAPTER		padapter,
++	u8				CutVersion,
++	u8				FabVersion,
++	u8				InterfaceType,
++	WLAN_PWR_CFG	PwrCfgCmd[]);
++
++#endif
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/ieee80211_ext.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/ieee80211_ext.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/ieee80211_ext.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/ieee80211_ext.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,477 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __IEEE80211_EXT_H
++#define __IEEE80211_EXT_H
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++
++#define WMM_OUI_TYPE 2
++#define WMM_OUI_SUBTYPE_INFORMATION_ELEMENT 0
++#define WMM_OUI_SUBTYPE_PARAMETER_ELEMENT 1
++#define WMM_OUI_SUBTYPE_TSPEC_ELEMENT 2
++#define WMM_VERSION 1
++
++#define WPA_PROTO_WPA BIT(0)
++#define WPA_PROTO_RSN BIT(1)
++
++#define WPA_KEY_MGMT_IEEE8021X BIT(0)
++#define WPA_KEY_MGMT_PSK BIT(1)
++#define WPA_KEY_MGMT_NONE BIT(2)
++#define WPA_KEY_MGMT_IEEE8021X_NO_WPA BIT(3)
++#define WPA_KEY_MGMT_WPA_NONE BIT(4)
++
++
++#define WPA_CAPABILITY_PREAUTH BIT(0)
++#define WPA_CAPABILITY_MGMT_FRAME_PROTECTION BIT(6)
++#define WPA_CAPABILITY_PEERKEY_ENABLED BIT(9)
++
++
++#define PMKID_LEN 16
++
++
++#ifdef PLATFORM_LINUX
++struct wpa_ie_hdr {
++	u8 elem_id;
++	u8 len;
++	u8 oui[4]; /* 24-bit OUI followed by 8-bit OUI type */
++	u8 version[2]; /* little endian */
++}__attribute__ ((packed));
++
++struct rsn_ie_hdr {
++	u8 elem_id; /* WLAN_EID_RSN */
++	u8 len;
++	u8 version[2]; /* little endian */
++}__attribute__ ((packed));
++
++struct wme_ac_parameter {
++#if defined(CONFIG_LITTLE_ENDIAN)
++	/* byte 1 */
++	u8 	aifsn:4,
++		acm:1,
++	 	aci:2,
++	 	reserved:1;
++
++	/* byte 2 */
++	u8 	eCWmin:4,
++	 	eCWmax:4;
++#elif defined(CONFIG_BIG_ENDIAN)
++	/* byte 1 */
++	u8 	reserved:1,
++	 	aci:2,
++	 	acm:1,
++	 	aifsn:4;
++
++	/* byte 2 */
++	u8 	eCWmax:4,
++	 	eCWmin:4;
++#else
++#error	"Please fix <endian.h>"
++#endif
++
++	/* bytes 3 & 4 */
++	u16 txopLimit;
++} __attribute__ ((packed));
++
++struct wme_parameter_element {
++	/* required fields for WME version 1 */
++	u8 oui[3];
++	u8 oui_type;
++	u8 oui_subtype;
++	u8 version;
++	u8 acInfo;
++	u8 reserved;
++	struct wme_ac_parameter ac[4];
++
++} __attribute__ ((packed));
++
++#endif
++
++#ifdef PLATFORM_WINDOWS
++
++#pragma pack(1)
++
++struct wpa_ie_hdr {
++	u8 elem_id;
++	u8 len;
++	u8 oui[4]; /* 24-bit OUI followed by 8-bit OUI type */
++	u8 version[2]; /* little endian */
++};
++
++struct rsn_ie_hdr {
++	u8 elem_id; /* WLAN_EID_RSN */
++	u8 len;
++	u8 version[2]; /* little endian */
++};
++
++#pragma pack()
++
++#endif
++
++#define WPA_PUT_LE16(a, val)			\
++	do {					\
++		(a)[1] = ((u16) (val)) >> 8;	\
++		(a)[0] = ((u16) (val)) & 0xff;	\
++	} while (0)
++
++#define WPA_PUT_BE32(a, val)					\
++	do {							\
++		(a)[0] = (u8) ((((u32) (val)) >> 24) & 0xff);	\
++		(a)[1] = (u8) ((((u32) (val)) >> 16) & 0xff);	\
++		(a)[2] = (u8) ((((u32) (val)) >> 8) & 0xff);	\
++		(a)[3] = (u8) (((u32) (val)) & 0xff);		\
++	} while (0)
++
++#define WPA_PUT_LE32(a, val)					\
++	do {							\
++		(a)[3] = (u8) ((((u32) (val)) >> 24) & 0xff);	\
++		(a)[2] = (u8) ((((u32) (val)) >> 16) & 0xff);	\
++		(a)[1] = (u8) ((((u32) (val)) >> 8) & 0xff);	\
++		(a)[0] = (u8) (((u32) (val)) & 0xff);		\
++	} while (0)
++
++#define RSN_SELECTOR_PUT(a, val) WPA_PUT_BE32((u8 *) (a), (val))
++//#define RSN_SELECTOR_PUT(a, val) WPA_PUT_LE32((u8 *) (a), (val))
++
++
++
++/* Action category code */
++enum ieee80211_category {
++	WLAN_CATEGORY_SPECTRUM_MGMT = 0,
++	WLAN_CATEGORY_QOS = 1,
++	WLAN_CATEGORY_DLS = 2,
++	WLAN_CATEGORY_BACK = 3,
++	WLAN_CATEGORY_HT = 7,
++	WLAN_CATEGORY_WMM = 17,
++};
++
++/* SPECTRUM_MGMT action code */
++enum ieee80211_spectrum_mgmt_actioncode {
++	WLAN_ACTION_SPCT_MSR_REQ = 0,
++	WLAN_ACTION_SPCT_MSR_RPRT = 1,
++	WLAN_ACTION_SPCT_TPC_REQ = 2,
++	WLAN_ACTION_SPCT_TPC_RPRT = 3,
++	WLAN_ACTION_SPCT_CHL_SWITCH = 4,
++	WLAN_ACTION_SPCT_EXT_CHL_SWITCH = 5,
++};
++
++/* BACK action code */
++enum ieee80211_back_actioncode {
++	WLAN_ACTION_ADDBA_REQ = 0,
++	WLAN_ACTION_ADDBA_RESP = 1,
++	WLAN_ACTION_DELBA = 2,
++};
++
++/* HT features action code */
++enum ieee80211_ht_actioncode {
++	WLAN_ACTION_NOTIFY_CH_WIDTH = 0,
++       WLAN_ACTION_SM_PS = 1,
++       WLAN_ACTION_PSPM = 2,
++       WLAN_ACTION_PCO_PHASE = 3,
++       WLAN_ACTION_MIMO_CSI_MX = 4,
++       WLAN_ACTION_MIMO_NONCP_BF = 5,
++       WLAN_ACTION_MIMP_CP_BF = 6,
++       WLAN_ACTION_ASEL_INDICATES_FB = 7,
++       WLAN_ACTION_HI_INFO_EXCHG = 8,
++};
++
++/* BACK (block-ack) parties */
++enum ieee80211_back_parties {
++	WLAN_BACK_RECIPIENT = 0,
++	WLAN_BACK_INITIATOR = 1,
++	WLAN_BACK_TIMER = 2,
++};
++
++#ifdef PLATFORM_LINUX
++
++struct ieee80211_mgmt {
++	u16 frame_control;
++	u16 duration;
++	u8 da[6];
++	u8 sa[6];
++	u8 bssid[6];
++	u16 seq_ctrl;
++	union {
++		struct {
++			u16 auth_alg;
++			u16 auth_transaction;
++			u16 status_code;
++			/* possibly followed by Challenge text */
++			u8 variable[0];
++		}  __attribute__ ((packed)) auth;
++		struct {
++			u16 reason_code;
++		}  __attribute__ ((packed)) deauth;
++		struct {
++			u16 capab_info;
++			u16 listen_interval;
++			/* followed by SSID and Supported rates */
++			u8 variable[0];
++		}  __attribute__ ((packed)) assoc_req;
++		struct {
++			u16 capab_info;
++			u16 status_code;
++			u16 aid;
++			/* followed by Supported rates */
++			u8 variable[0];
++		}  __attribute__ ((packed)) assoc_resp, reassoc_resp;
++		struct {
++			u16 capab_info;
++			u16 listen_interval;
++			u8 current_ap[6];
++			/* followed by SSID and Supported rates */
++			u8 variable[0];
++		}  __attribute__ ((packed)) reassoc_req;
++		struct {
++			u16 reason_code;
++		}  __attribute__ ((packed)) disassoc;
++		struct {
++			__le64 timestamp;
++			u16 beacon_int;
++			u16 capab_info;
++			/* followed by some of SSID, Supported rates,
++			 * FH Params, DS Params, CF Params, IBSS Params, TIM */
++			u8 variable[0];
++		}  __attribute__ ((packed)) beacon;
++		struct {
++			/* only variable items: SSID, Supported rates */
++			u8 variable[0];
++		}  __attribute__ ((packed)) probe_req;
++		struct {
++			__le64 timestamp;
++			u16 beacon_int;
++			u16 capab_info;
++			/* followed by some of SSID, Supported rates,
++			 * FH Params, DS Params, CF Params, IBSS Params */
++			u8 variable[0];
++		}  __attribute__ ((packed)) probe_resp;
++		struct {
++			u8 category;
++			union {
++				struct {
++					u8 action_code;
++					u8 dialog_token;
++					u8 status_code;
++					u8 variable[0];
++				}  __attribute__ ((packed)) wme_action;
++#if 0
++				struct{
++					u8 action_code;
++					u8 element_id;
++					u8 length;
++					struct ieee80211_channel_sw_ie sw_elem;
++				}  __attribute__ ((packed)) chan_switch;
++				struct{
++					u8 action_code;
++					u8 dialog_token;
++					u8 element_id;
++					u8 length;
++					struct ieee80211_msrment_ie msr_elem;
++				}  __attribute__ ((packed)) measurement;
++#endif
++				struct{
++					u8 action_code;
++					u8 dialog_token;
++					u16 capab;
++					u16 timeout;
++					u16 start_seq_num;
++				}  __attribute__ ((packed)) addba_req;
++				struct{
++					u8 action_code;
++					u8 dialog_token;
++					u16 status;
++					u16 capab;
++					u16 timeout;
++				}  __attribute__ ((packed)) addba_resp;
++				struct{
++					u8 action_code;
++					u16 params;
++					u16 reason_code;
++				}  __attribute__ ((packed)) delba;
++				struct{
++					u8 action_code;
++					/* capab_info for open and confirm,
++					 * reason for close
++					 */
++					u16 aux;
++					/* Followed in plink_confirm by status
++					 * code, AID and supported rates,
++					 * and directly by supported rates in
++					 * plink_open and plink_close
++					 */
++					u8 variable[0];
++				}  __attribute__ ((packed)) plink_action;
++				struct{
++					u8 action_code;
++					u8 variable[0];
++				}  __attribute__ ((packed)) mesh_action;
++			} __attribute__ ((packed)) u;
++		}  __attribute__ ((packed)) action;
++	} __attribute__ ((packed)) u;
++}__attribute__ ((packed));
++
++#endif
++
++
++#ifdef PLATFORM_WINDOWS
++
++#pragma pack(1)
++
++struct ieee80211_mgmt {
++	u16 frame_control;
++	u16 duration;
++	u8 da[6];
++	u8 sa[6];
++	u8 bssid[6];
++	u16 seq_ctrl;
++	union {
++		struct {
++			u16 auth_alg;
++			u16 auth_transaction;
++			u16 status_code;
++			/* possibly followed by Challenge text */
++			u8 variable[0];
++		}  auth;
++		struct {
++			u16 reason_code;
++		}  deauth;
++		struct {
++			u16 capab_info;
++			u16 listen_interval;
++			/* followed by SSID and Supported rates */
++			u8 variable[0];
++		}  assoc_req;
++		struct {
++			u16 capab_info;
++			u16 status_code;
++			u16 aid;
++			/* followed by Supported rates */
++			u8 variable[0];
++		}  assoc_resp, reassoc_resp;
++		struct {
++			u16 capab_info;
++			u16 listen_interval;
++			u8 current_ap[6];
++			/* followed by SSID and Supported rates */
++			u8 variable[0];
++		}  reassoc_req;
++		struct {
++			u16 reason_code;
++		}  disassoc;
++#if 0		
++		struct {
++			__le64 timestamp;
++			u16 beacon_int;
++			u16 capab_info;
++			/* followed by some of SSID, Supported rates,
++			 * FH Params, DS Params, CF Params, IBSS Params, TIM */
++			u8 variable[0];
++		}  beacon;
++		struct {
++			/* only variable items: SSID, Supported rates */
++			u8 variable[0];
++		}  probe_req;
++		
++		struct {
++			__le64 timestamp;
++			u16 beacon_int;
++			u16 capab_info;
++			/* followed by some of SSID, Supported rates,
++			 * FH Params, DS Params, CF Params, IBSS Params */
++			u8 variable[0];
++		}  probe_resp;
++#endif	
++		struct {
++			u8 category;
++			union {
++				struct {
++					u8 action_code;
++					u8 dialog_token;
++					u8 status_code;
++					u8 variable[0];
++				}  wme_action;
++/*				
++				struct{
++					u8 action_code;
++					u8 element_id;
++					u8 length;
++					struct ieee80211_channel_sw_ie sw_elem;
++				}  chan_switch;
++				struct{
++					u8 action_code;
++					u8 dialog_token;
++					u8 element_id;
++					u8 length;
++					struct ieee80211_msrment_ie msr_elem;
++				}  measurement;
++*/				
++				struct{
++					u8 action_code;
++					u8 dialog_token;
++					u16 capab;
++					u16 timeout;
++					u16 start_seq_num;
++				}  addba_req;
++				struct{
++					u8 action_code;
++					u8 dialog_token;
++					u16 status;
++					u16 capab;
++					u16 timeout;
++				}  addba_resp;
++				struct{
++					u8 action_code;
++					u16 params;
++					u16 reason_code;
++				}  delba;
++				struct{
++					u8 action_code;
++					/* capab_info for open and confirm,
++					 * reason for close
++					 */
++					u16 aux;
++					/* Followed in plink_confirm by status
++					 * code, AID and supported rates,
++					 * and directly by supported rates in
++					 * plink_open and plink_close
++					 */
++					u8 variable[0];
++				}  plink_action;
++				struct{
++					u8 action_code;
++					u8 variable[0];
++				}  mesh_action;
++			} u;
++		}  action;
++	} u;
++} ;
++
++#pragma pack()
++
++#endif
++
++/* mgmt header + 1 byte category code */
++#define IEEE80211_MIN_ACTION_SIZE FIELD_OFFSET(struct ieee80211_mgmt, u.action.u)
++
++
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/ieee80211.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/ieee80211.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/ieee80211.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/ieee80211.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,1580 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __IEEE80211_H
++#define __IEEE80211_H
++
++
++#ifndef CONFIG_RTL8711FW
++
++	#include <drv_conf.h>
++	#include <osdep_service.h>
++	#include <drv_types.h>
++	#include "wifi.h"
++
++	#if defined PLATFORM_OS_XP
++	#include <ntstrsafe.h>
++	#endif
++	#if defined PLATFORM_LINUX
++	#include <linux/wireless.h>
++	#endif
++#else
++	
++	#include <list.h>
++
++#endif
++
++#define MGMT_QUEUE_NUM 5
++
++#define ETH_ALEN	6
++#define ETH_TYPE_LEN		2
++#define PAYLOAD_TYPE_LEN	1
++
++#ifdef CONFIG_AP_MODE
++
++#define RTL_IOCTL_HOSTAPD (SIOCIWFIRSTPRIV + 28)
++
++/* RTL871X_IOCTL_HOSTAPD ioctl() cmd: */
++enum {
++	RTL871X_HOSTAPD_FLUSH = 1,
++	RTL871X_HOSTAPD_ADD_STA = 2,
++	RTL871X_HOSTAPD_REMOVE_STA = 3,
++	RTL871X_HOSTAPD_GET_INFO_STA = 4,
++	/* REMOVED: PRISM2_HOSTAPD_RESET_TXEXC_STA = 5, */
++	RTL871X_HOSTAPD_GET_WPAIE_STA = 5,
++	RTL871X_SET_ENCRYPTION = 6,
++	RTL871X_GET_ENCRYPTION = 7,
++	RTL871X_HOSTAPD_SET_FLAGS_STA = 8,
++	RTL871X_HOSTAPD_GET_RID = 9,
++	RTL871X_HOSTAPD_SET_RID = 10,
++	RTL871X_HOSTAPD_SET_ASSOC_AP_ADDR = 11,
++	RTL871X_HOSTAPD_SET_GENERIC_ELEMENT = 12,
++	RTL871X_HOSTAPD_MLME = 13,
++	RTL871X_HOSTAPD_SCAN_REQ = 14,
++	RTL871X_HOSTAPD_STA_CLEAR_STATS = 15,
++	RTL871X_HOSTAPD_SET_BEACON=16,
++	RTL871X_HOSTAPD_SET_WPS_BEACON = 17,
++	RTL871X_HOSTAPD_SET_WPS_PROBE_RESP = 18,
++	RTL871X_HOSTAPD_SET_WPS_ASSOC_RESP = 19,
++	RTL871X_HOSTAPD_SET_HIDDEN_SSID = 20,
++	RTL871X_HOSTAPD_SET_MACADDR_ACL = 21,
++	RTL871X_HOSTAPD_ACL_ADD_STA = 22,
++	RTL871X_HOSTAPD_ACL_REMOVE_STA = 23,
++};
++
++/* STA flags */
++#define WLAN_STA_AUTH BIT(0)
++#define WLAN_STA_ASSOC BIT(1)
++#define WLAN_STA_PS BIT(2)
++#define WLAN_STA_TIM BIT(3)
++#define WLAN_STA_PERM BIT(4)
++#define WLAN_STA_AUTHORIZED BIT(5)
++#define WLAN_STA_PENDING_POLL BIT(6) /* pending activity poll not ACKed */
++#define WLAN_STA_SHORT_PREAMBLE BIT(7)
++#define WLAN_STA_PREAUTH BIT(8)
++#define WLAN_STA_WME BIT(9)
++#define WLAN_STA_MFP BIT(10)
++#define WLAN_STA_HT BIT(11)
++#define WLAN_STA_WPS BIT(12)
++#define WLAN_STA_MAYBE_WPS BIT(13)
++#define WLAN_STA_NONERP BIT(31)
++
++#endif
++
++#define IEEE_CMD_SET_WPA_PARAM			1
++#define IEEE_CMD_SET_WPA_IE				2
++#define IEEE_CMD_SET_ENCRYPTION			3
++#define IEEE_CMD_MLME						4
++
++#define IEEE_PARAM_WPA_ENABLED				1
++#define IEEE_PARAM_TKIP_COUNTERMEASURES		2
++#define IEEE_PARAM_DROP_UNENCRYPTED			3
++#define IEEE_PARAM_PRIVACY_INVOKED			4
++#define IEEE_PARAM_AUTH_ALGS					5
++#define IEEE_PARAM_IEEE_802_1X				6
++#define IEEE_PARAM_WPAX_SELECT				7
++
++#define AUTH_ALG_OPEN_SYSTEM			0x1
++#define AUTH_ALG_SHARED_KEY			0x2
++#define AUTH_ALG_LEAP				0x00000004
++
++#define IEEE_MLME_STA_DEAUTH				1
++#define IEEE_MLME_STA_DISASSOC			2
++
++#define IEEE_CRYPT_ERR_UNKNOWN_ALG			2
++#define IEEE_CRYPT_ERR_UNKNOWN_ADDR			3
++#define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED		4
++#define IEEE_CRYPT_ERR_KEY_SET_FAILED			5
++#define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED		6
++#define IEEE_CRYPT_ERR_CARD_CONF_FAILED		7
++
++
++#define	IEEE_CRYPT_ALG_NAME_LEN			16
++
++#define WPA_CIPHER_NONE 	BIT(0)
++#define WPA_CIPHER_WEP40 	BIT(1)
++#define WPA_CIPHER_WEP104 BIT(2)
++#define WPA_CIPHER_TKIP 	BIT(3)
++#define WPA_CIPHER_CCMP 	BIT(4)
++
++
++
++#define WPA_SELECTOR_LEN 4
++extern u8 RTW_WPA_OUI_TYPE[] ;
++extern u16 RTW_WPA_VERSION ;
++extern u8 WPA_AUTH_KEY_MGMT_NONE[];
++extern u8 WPA_AUTH_KEY_MGMT_UNSPEC_802_1X[];
++extern u8 WPA_AUTH_KEY_MGMT_PSK_OVER_802_1X[];
++extern u8 WPA_CIPHER_SUITE_NONE[];
++extern u8 WPA_CIPHER_SUITE_WEP40[];
++extern u8 WPA_CIPHER_SUITE_TKIP[];
++extern u8 WPA_CIPHER_SUITE_WRAP[];
++extern u8 WPA_CIPHER_SUITE_CCMP[];
++extern u8 WPA_CIPHER_SUITE_WEP104[];
++
++
++#define RSN_HEADER_LEN 4
++#define RSN_SELECTOR_LEN 4
++
++extern u16 RSN_VERSION_BSD;
++extern u8 RSN_AUTH_KEY_MGMT_UNSPEC_802_1X[];
++extern u8 RSN_AUTH_KEY_MGMT_PSK_OVER_802_1X[];
++extern u8 RSN_CIPHER_SUITE_NONE[];
++extern u8 RSN_CIPHER_SUITE_WEP40[];
++extern u8 RSN_CIPHER_SUITE_TKIP[];
++extern u8 RSN_CIPHER_SUITE_WRAP[];
++extern u8 RSN_CIPHER_SUITE_CCMP[];
++extern u8 RSN_CIPHER_SUITE_WEP104[];
++
++typedef enum _RATR_TABLE_MODE{
++	RATR_INX_WIRELESS_NGB = 0,	// BGN 40 Mhz 2SS 1SS
++	RATR_INX_WIRELESS_NG = 1,		// GN or N
++	RATR_INX_WIRELESS_NB = 2,		// BGN 20 Mhz 2SS 1SS  or BN
++	RATR_INX_WIRELESS_N = 3,
++	RATR_INX_WIRELESS_GB = 4,
++	RATR_INX_WIRELESS_G = 5,
++	RATR_INX_WIRELESS_B = 6,
++	RATR_INX_WIRELESS_MC = 7,
++	RATR_INX_WIRELESS_AC_N = 8,
++}RATR_TABLE_MODE, *PRATR_TABLE_MODE;
++
++enum NETWORK_TYPE
++{
++    WIRELESS_INVALID = 0,
++    //Sub-Element
++    WIRELESS_11B = BIT(0), // tx: cck only , rx: cck only, hw: cck
++    WIRELESS_11G = BIT(1), // tx: ofdm only, rx: ofdm & cck, hw: cck & ofdm
++    WIRELESS_11A = BIT(2), // tx: ofdm only, rx: ofdm only, hw: ofdm only
++    WIRELESS_11_24N = BIT(3), // tx: MCS only, rx: MCS & cck, hw: MCS & cck
++    WIRELESS_11_5N = BIT(4), // tx: MCS only, rx: MCS & ofdm, hw: ofdm only
++	//WIRELESS_AUTO 	= BIT(5), 
++	WIRELESS_AC 		= BIT(6), 
++
++    //Combination
++    WIRELESS_11BG = (WIRELESS_11B|WIRELESS_11G), // tx: cck & ofdm, rx: cck & ofdm & MCS, hw: cck & ofdm
++    WIRELESS_11G_24N = (WIRELESS_11G|WIRELESS_11_24N), // tx: ofdm & MCS, rx: ofdm & cck & MCS, hw: cck & ofdm
++    WIRELESS_11A_5N = (WIRELESS_11A|WIRELESS_11_5N), // tx: ofdm & MCS, rx: ofdm & MCS, hw: ofdm only
++    WIRELESS_11BG_24N = (WIRELESS_11B|WIRELESS_11G|WIRELESS_11_24N), // tx: ofdm & cck & MCS, rx: ofdm & cck & MCS, hw: ofdm & cck
++    WIRELESS_11AGN = (WIRELESS_11A|WIRELESS_11G|WIRELESS_11_24N|WIRELESS_11_5N), // tx: ofdm & MCS, rx: ofdm & MCS, hw: ofdm only
++    WIRELESS_11ABGN = (WIRELESS_11A|WIRELESS_11B|WIRELESS_11G|WIRELESS_11_24N|WIRELESS_11_5N),
++};
++
++#define SUPPORTED_24G_NETTYPE_MSK (WIRELESS_11B | WIRELESS_11G | WIRELESS_11_24N)
++#define SUPPORTED_5G_NETTYPE_MSK (WIRELESS_11A | WIRELESS_11_5N)
++
++#define IsSupported24G(NetType) ((NetType) & SUPPORTED_24G_NETTYPE_MSK ? _TRUE : _FALSE)
++#define IsSupported5G(NetType) ((NetType) & SUPPORTED_5G_NETTYPE_MSK ? _TRUE : _FALSE)
++
++#define IsEnableHWCCK(NetType) IsSupported24G(NetType)
++#define IsEnableHWOFDM(NetType) ((NetType) & (WIRELESS_11G|WIRELESS_11_24N|SUPPORTED_5G_NETTYPE_MSK) ? _TRUE : _FALSE)
++
++#define IsSupportedRxCCK(NetType) IsEnableHWCCK(NetType)
++#define IsSupportedRxOFDM(NetType) IsEnableHWOFDM(NetType)
++#define IsSupportedRxMCS(NetType) IsEnableHWOFDM(NetType)
++
++#define IsSupportedTxCCK(NetType) ((NetType) & (WIRELESS_11B) ? _TRUE : _FALSE)
++#define IsSupportedTxOFDM(NetType) ((NetType) & (WIRELESS_11G|WIRELESS_11A) ? _TRUE : _FALSE)
++#define IsSupportedTxMCS(NetType) ((NetType) & (WIRELESS_11_24N|WIRELESS_11_5N) ? _TRUE : _FALSE) 
++
++
++typedef struct ieee_param {
++	u32 cmd;
++	u8 sta_addr[ETH_ALEN];
++	union {
++		struct {
++			u8 name;
++			u32 value;
++		} wpa_param;
++		struct {
++			u32 len;
++			u8 reserved[32];
++			u8 data[0];
++		} wpa_ie;
++	        struct{
++			int command;
++    			int reason_code;
++		} mlme;
++		struct {
++			u8 alg[IEEE_CRYPT_ALG_NAME_LEN];
++			u8 set_tx;
++			u32 err;
++			u8 idx;
++			u8 seq[8]; /* sequence counter (set: RX, get: TX) */
++			u16 key_len;
++			u8 key[0];
++		} crypt;
++#ifdef CONFIG_AP_MODE
++		struct {
++			u16 aid;
++			u16 capability;
++			int flags;
++			u8 tx_supp_rates[16];		
++			struct rtw_ieee80211_ht_cap ht_cap;
++		} add_sta;
++		struct {
++			u8	reserved[2];//for set max_num_sta
++			u8	buf[0];
++		} bcn_ie;
++#endif
++
++	} u;	   
++}ieee_param;
++
++#ifdef CONFIG_AP_MODE
++typedef struct ieee_param_ex {
++	u32 cmd;
++	u8 sta_addr[ETH_ALEN];
++	u8 data[0];
++}ieee_param_ex;
++
++struct sta_data{
++	u16 aid;
++	u16 capability;
++	int flags;
++	u32 sta_set;
++	u8 tx_supp_rates[16];	
++	u32 tx_supp_rates_len;
++	struct rtw_ieee80211_ht_cap ht_cap;
++	u64	rx_pkts;
++	u64	rx_bytes;
++	u64	rx_drops;
++	u64	tx_pkts;
++	u64	tx_bytes;
++	u64	tx_drops;
++};
++#endif
++
++
++#if WIRELESS_EXT < 17
++#define IW_QUAL_QUAL_INVALID   0x10
++#define IW_QUAL_LEVEL_INVALID  0x20
++#define IW_QUAL_NOISE_INVALID  0x40
++#define IW_QUAL_QUAL_UPDATED   0x1
++#define IW_QUAL_LEVEL_UPDATED  0x2
++#define IW_QUAL_NOISE_UPDATED  0x4
++#endif
++
++#define IEEE80211_DATA_LEN		2304
++/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
++   6.2.1.1.2.
++
++   The figure in section 7.1.2 suggests a body size of up to 2312
++   bytes is allowed, which is a bit confusing, I suspect this
++   represents the 2304 bytes of real data, plus a possible 8 bytes of
++   WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
++
++
++#define IEEE80211_HLEN			30
++#define IEEE80211_FRAME_LEN		(IEEE80211_DATA_LEN + IEEE80211_HLEN)
++
++
++/* this is stolen from ipw2200 driver */
++#define IEEE_IBSS_MAC_HASH_SIZE 31
++
++struct ieee_ibss_seq {
++	u8 mac[ETH_ALEN];
++	u16 seq_num;
++	u16 frag_num;
++	unsigned long packet_time;
++	_list	list;
++};
++
++#if defined(PLATFORM_LINUX) || defined(CONFIG_RTL8711FW)||defined(PLATFORM_FREEBSD) 
++
++struct rtw_ieee80211_hdr {
++	u16 frame_ctl;
++	u16 duration_id;
++	u8 addr1[ETH_ALEN];
++	u8 addr2[ETH_ALEN];
++	u8 addr3[ETH_ALEN];
++	u16 seq_ctl;
++	u8 addr4[ETH_ALEN];
++} __attribute__ ((packed));
++
++struct rtw_ieee80211_hdr_3addr {
++	u16 frame_ctl;
++	u16 duration_id;
++	u8 addr1[ETH_ALEN];
++	u8 addr2[ETH_ALEN];
++	u8 addr3[ETH_ALEN];
++	u16 seq_ctl;
++} __attribute__ ((packed));
++
++
++struct rtw_ieee80211_hdr_qos {
++	u16 frame_ctl;
++	u16 duration_id;
++	u8 addr1[ETH_ALEN];
++	u8 addr2[ETH_ALEN];
++	u8 addr3[ETH_ALEN];
++	u16 seq_ctl;
++	u8 addr4[ETH_ALEN];
++	u16	qc;
++}  __attribute__ ((packed));
++
++struct rtw_ieee80211_hdr_3addr_qos {
++        u16 frame_ctl;
++	u16 duration_id;
++	u8 addr1[ETH_ALEN];
++	u8 addr2[ETH_ALEN];
++	u8 addr3[ETH_ALEN];
++	u16 seq_ctl;
++       u16     qc;
++}  __attribute__ ((packed));
++
++struct eapol {
++	u8 snap[6];
++	u16 ethertype;
++	u8 version;
++	u8 type;
++	u16 length;
++} __attribute__ ((packed));
++
++#endif
++
++
++
++#ifdef PLATFORM_WINDOWS
++
++#pragma pack(1)
++struct rtw_ieee80211_hdr {
++	u16 frame_ctl;
++	u16 duration_id;
++	u8 addr1[ETH_ALEN];
++	u8 addr2[ETH_ALEN];
++	u8 addr3[ETH_ALEN];
++	u16 seq_ctl;
++	u8 addr4[ETH_ALEN];
++};
++
++struct rtw_ieee80211_hdr_3addr {
++	u16 frame_ctl;
++	u16 duration_id;
++	u8 addr1[ETH_ALEN];
++	u8 addr2[ETH_ALEN];
++	u8 addr3[ETH_ALEN];
++	u16 seq_ctl;
++};
++
++
++struct rtw_ieee80211_hdr_qos {
++	struct rtw_ieee80211_hdr wlan_hdr;
++	u16	qc;
++};
++
++struct rtw_ieee80211_hdr_3addr_qos {
++        struct  rtw_ieee80211_hdr_3addr wlan_hdr;
++        u16     qc;
++};
++
++struct eapol {
++	u8 snap[6];
++	u16 ethertype;
++	u8 version;
++	u8 type;
++	u16 length;
++};
++#pragma pack()
++
++#endif
++
++
++
++enum eap_type {
++	EAP_PACKET = 0,
++	EAPOL_START,
++	EAPOL_LOGOFF,
++	EAPOL_KEY,
++	EAPOL_ENCAP_ASF_ALERT
++};
++
++#define IEEE80211_3ADDR_LEN 24
++#define IEEE80211_4ADDR_LEN 30
++#define IEEE80211_FCS_LEN    4
++
++#define MIN_FRAG_THRESHOLD     256U
++#define	MAX_FRAG_THRESHOLD     2346U
++
++/* Frame control field constants */
++#define RTW_IEEE80211_FCTL_VERS		0x0003
++#define RTW_IEEE80211_FCTL_FTYPE		0x000c
++#define RTW_IEEE80211_FCTL_STYPE		0x00f0
++#define RTW_IEEE80211_FCTL_TODS		0x0100
++#define RTW_IEEE80211_FCTL_FROMDS	0x0200
++#define RTW_IEEE80211_FCTL_MOREFRAGS	0x0400
++#define RTW_IEEE80211_FCTL_RETRY		0x0800
++#define RTW_IEEE80211_FCTL_PM		0x1000
++#define RTW_IEEE80211_FCTL_MOREDATA	0x2000
++#define RTW_IEEE80211_FCTL_PROTECTED	0x4000
++#define RTW_IEEE80211_FCTL_ORDER		0x8000
++#define RTW_IEEE80211_FCTL_CTL_EXT	0x0f00
++
++#define RTW_IEEE80211_FTYPE_MGMT		0x0000
++#define RTW_IEEE80211_FTYPE_CTL		0x0004
++#define RTW_IEEE80211_FTYPE_DATA		0x0008
++#define RTW_IEEE80211_FTYPE_EXT		0x000c
++
++/* management */
++#define RTW_IEEE80211_STYPE_ASSOC_REQ	0x0000
++#define RTW_IEEE80211_STYPE_ASSOC_RESP 	0x0010
++#define RTW_IEEE80211_STYPE_REASSOC_REQ	0x0020
++#define RTW_IEEE80211_STYPE_REASSOC_RESP	0x0030
++#define RTW_IEEE80211_STYPE_PROBE_REQ	0x0040
++#define RTW_IEEE80211_STYPE_PROBE_RESP	0x0050
++#define RTW_IEEE80211_STYPE_BEACON		0x0080
++#define RTW_IEEE80211_STYPE_ATIM		0x0090
++#define RTW_IEEE80211_STYPE_DISASSOC	0x00A0
++#define RTW_IEEE80211_STYPE_AUTH		0x00B0
++#define RTW_IEEE80211_STYPE_DEAUTH		0x00C0
++#define RTW_IEEE80211_STYPE_ACTION		0x00D0
++
++/* control */
++#define RTW_IEEE80211_STYPE_CTL_EXT		0x0060
++#define RTW_IEEE80211_STYPE_BACK_REQ		0x0080
++#define RTW_IEEE80211_STYPE_BACK		0x0090
++#define RTW_IEEE80211_STYPE_PSPOLL		0x00A0
++#define RTW_IEEE80211_STYPE_RTS		0x00B0
++#define RTW_IEEE80211_STYPE_CTS		0x00C0
++#define RTW_IEEE80211_STYPE_ACK		0x00D0
++#define RTW_IEEE80211_STYPE_CFEND		0x00E0
++#define RTW_IEEE80211_STYPE_CFENDACK		0x00F0
++
++/* data */
++#define RTW_IEEE80211_STYPE_DATA		0x0000
++#define RTW_IEEE80211_STYPE_DATA_CFACK	0x0010
++#define RTW_IEEE80211_STYPE_DATA_CFPOLL	0x0020
++#define RTW_IEEE80211_STYPE_DATA_CFACKPOLL	0x0030
++#define RTW_IEEE80211_STYPE_NULLFUNC	0x0040
++#define RTW_IEEE80211_STYPE_CFACK		0x0050
++#define RTW_IEEE80211_STYPE_CFPOLL		0x0060
++#define RTW_IEEE80211_STYPE_CFACKPOLL	0x0070
++#define RTW_IEEE80211_STYPE_QOS_DATA		0x0080
++#define RTW_IEEE80211_STYPE_QOS_DATA_CFACK		0x0090
++#define RTW_IEEE80211_STYPE_QOS_DATA_CFPOLL		0x00A0
++#define RTW_IEEE80211_STYPE_QOS_DATA_CFACKPOLL	0x00B0
++#define RTW_IEEE80211_STYPE_QOS_NULLFUNC	0x00C0
++#define RTW_IEEE80211_STYPE_QOS_CFACK		0x00D0
++#define RTW_IEEE80211_STYPE_QOS_CFPOLL		0x00E0
++#define RTW_IEEE80211_STYPE_QOS_CFACKPOLL	0x00F0
++
++/* sequence control field */
++#define RTW_IEEE80211_SCTL_FRAG	0x000F
++#define RTW_IEEE80211_SCTL_SEQ	0xFFF0
++
++
++#define RTW_ERP_INFO_NON_ERP_PRESENT BIT(0)
++#define RTW_ERP_INFO_USE_PROTECTION BIT(1)
++#define RTW_ERP_INFO_BARKER_PREAMBLE_MODE BIT(2)
++
++/* QoS,QOS */
++#define NORMAL_ACK			0
++#define NO_ACK				1
++#define NON_EXPLICIT_ACK	2
++#define BLOCK_ACK			3
++
++#ifndef ETH_P_PAE
++#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
++#endif /* ETH_P_PAE */
++
++#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
++
++#define ETH_P_ECONET	0x0018
++
++#ifndef ETH_P_80211_RAW
++#define ETH_P_80211_RAW (ETH_P_ECONET + 1)
++#endif
++
++/* IEEE 802.11 defines */
++
++#define P80211_OUI_LEN 3
++
++#if defined(PLATFORM_LINUX) || defined(CONFIG_RTL8711FW) || defined(PLATFORM_FREEBSD)
++
++struct ieee80211_snap_hdr {
++
++        u8    dsap;   /* always 0xAA */
++        u8    ssap;   /* always 0xAA */
++        u8    ctrl;   /* always 0x03 */
++        u8    oui[P80211_OUI_LEN];    /* organizational universal id */
++
++} __attribute__ ((packed));
++
++#endif
++
++#ifdef PLATFORM_WINDOWS
++
++#pragma pack(1)
++struct ieee80211_snap_hdr {
++
++        u8    dsap;   /* always 0xAA */
++        u8    ssap;   /* always 0xAA */
++        u8    ctrl;   /* always 0x03 */
++        u8    oui[P80211_OUI_LEN];    /* organizational universal id */
++
++};
++#pragma pack()
++
++#endif
++
++
++#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
++
++#define WLAN_FC_GET_TYPE(fc) ((fc) & RTW_IEEE80211_FCTL_FTYPE)
++#define WLAN_FC_GET_STYPE(fc) ((fc) & RTW_IEEE80211_FCTL_STYPE)
++
++#define WLAN_QC_GET_TID(qc) ((qc) & 0x0f)
++
++#define WLAN_GET_SEQ_FRAG(seq) ((seq) & RTW_IEEE80211_SCTL_FRAG)
++#define WLAN_GET_SEQ_SEQ(seq)  ((seq) & RTW_IEEE80211_SCTL_SEQ)
++
++/* Authentication algorithms */
++#define WLAN_AUTH_OPEN 0
++#define WLAN_AUTH_SHARED_KEY 1
++
++#define WLAN_AUTH_CHALLENGE_LEN 128
++
++#define WLAN_CAPABILITY_BSS (1<<0)
++#define WLAN_CAPABILITY_IBSS (1<<1)
++#define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
++#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
++#define WLAN_CAPABILITY_PRIVACY (1<<4)
++#define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
++#define WLAN_CAPABILITY_PBCC (1<<6)
++#define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
++#define WLAN_CAPABILITY_SHORT_SLOT (1<<10)
++
++/* Status codes */
++#define WLAN_STATUS_SUCCESS 0
++#define WLAN_STATUS_UNSPECIFIED_FAILURE 1
++#define WLAN_STATUS_CAPS_UNSUPPORTED 10
++#define WLAN_STATUS_REASSOC_NO_ASSOC 11
++#define WLAN_STATUS_ASSOC_DENIED_UNSPEC 12
++#define WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG 13
++#define WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION 14
++#define WLAN_STATUS_CHALLENGE_FAIL 15
++#define WLAN_STATUS_AUTH_TIMEOUT 16
++#define WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA 17
++#define WLAN_STATUS_ASSOC_DENIED_RATES 18
++/* 802.11b */
++#define WLAN_STATUS_ASSOC_DENIED_NOSHORT 19
++#define WLAN_STATUS_ASSOC_DENIED_NOPBCC 20
++#define WLAN_STATUS_ASSOC_DENIED_NOAGILITY 21
++
++/* Reason codes */
++#define WLAN_REASON_UNSPECIFIED 1
++#define WLAN_REASON_PREV_AUTH_NOT_VALID 2
++#define WLAN_REASON_DEAUTH_LEAVING 3
++#define WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY 4
++#define WLAN_REASON_DISASSOC_AP_BUSY 5
++#define WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA 6
++#define WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA 7
++#define WLAN_REASON_DISASSOC_STA_HAS_LEFT 8
++#define WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH 9
++#define WLAN_REASON_JOIN_WRONG_CHANNEL       65534
++#define WLAN_REASON_EXPIRATION_CHK 65535
++
++/* Information Element IDs */
++#define WLAN_EID_SSID 0
++#define WLAN_EID_SUPP_RATES 1
++#define WLAN_EID_FH_PARAMS 2
++#define WLAN_EID_DS_PARAMS 3
++#define WLAN_EID_CF_PARAMS 4
++#define WLAN_EID_TIM 5
++#define WLAN_EID_IBSS_PARAMS 6
++#define WLAN_EID_CHALLENGE 16
++/* EIDs defined by IEEE 802.11h - START */
++#define WLAN_EID_PWR_CONSTRAINT 32
++#define WLAN_EID_PWR_CAPABILITY 33
++#define WLAN_EID_TPC_REQUEST 34
++#define WLAN_EID_TPC_REPORT 35
++#define WLAN_EID_SUPPORTED_CHANNELS 36
++#define WLAN_EID_CHANNEL_SWITCH 37
++#define WLAN_EID_MEASURE_REQUEST 38
++#define WLAN_EID_MEASURE_REPORT 39
++#define WLAN_EID_QUITE 40
++#define WLAN_EID_IBSS_DFS 41
++/* EIDs defined by IEEE 802.11h - END */
++#define WLAN_EID_ERP_INFO 42
++#define WLAN_EID_HT_CAP 45
++#define WLAN_EID_RSN 48
++#define WLAN_EID_EXT_SUPP_RATES 50
++#define WLAN_EID_MOBILITY_DOMAIN 54
++#define WLAN_EID_FAST_BSS_TRANSITION 55
++#define WLAN_EID_TIMEOUT_INTERVAL 56
++#define WLAN_EID_RIC_DATA 57
++#define WLAN_EID_HT_OPERATION 61
++#define WLAN_EID_SECONDARY_CHANNEL_OFFSET 62
++#define WLAN_EID_20_40_BSS_COEXISTENCE 72
++#define WLAN_EID_20_40_BSS_INTOLERANT 73
++#define WLAN_EID_OVERLAPPING_BSS_SCAN_PARAMS 74
++#define WLAN_EID_MMIE 76
++#define WLAN_EID_VENDOR_SPECIFIC 221
++#define WLAN_EID_GENERIC (WLAN_EID_VENDOR_SPECIFIC)
++
++#define IEEE80211_MGMT_HDR_LEN 24
++#define IEEE80211_DATA_HDR3_LEN 24
++#define IEEE80211_DATA_HDR4_LEN 30
++
++
++#define IEEE80211_STATMASK_SIGNAL (1<<0)
++#define IEEE80211_STATMASK_RSSI (1<<1)
++#define IEEE80211_STATMASK_NOISE (1<<2)
++#define IEEE80211_STATMASK_RATE (1<<3)
++#define IEEE80211_STATMASK_WEMASK 0x7
++
++
++#define IEEE80211_CCK_MODULATION    (1<<0)
++#define IEEE80211_OFDM_MODULATION   (1<<1)
++
++#define IEEE80211_24GHZ_BAND     (1<<0)
++#define IEEE80211_52GHZ_BAND     (1<<1)
++
++#define IEEE80211_CCK_RATE_LEN  		4
++#define IEEE80211_NUM_OFDM_RATESLEN	8
++
++
++#define IEEE80211_CCK_RATE_1MB		        0x02
++#define IEEE80211_CCK_RATE_2MB		        0x04
++#define IEEE80211_CCK_RATE_5MB		        0x0B
++#define IEEE80211_CCK_RATE_11MB		        0x16
++#define IEEE80211_OFDM_RATE_LEN 		8
++#define IEEE80211_OFDM_RATE_6MB		        0x0C
++#define IEEE80211_OFDM_RATE_9MB		        0x12
++#define IEEE80211_OFDM_RATE_12MB		0x18
++#define IEEE80211_OFDM_RATE_18MB		0x24
++#define IEEE80211_OFDM_RATE_24MB		0x30
++#define IEEE80211_OFDM_RATE_36MB		0x48
++#define IEEE80211_OFDM_RATE_48MB		0x60
++#define IEEE80211_OFDM_RATE_54MB		0x6C
++#define IEEE80211_BASIC_RATE_MASK		0x80
++
++#define IEEE80211_CCK_RATE_1MB_MASK		(1<<0)
++#define IEEE80211_CCK_RATE_2MB_MASK		(1<<1)
++#define IEEE80211_CCK_RATE_5MB_MASK		(1<<2)
++#define IEEE80211_CCK_RATE_11MB_MASK		(1<<3)
++#define IEEE80211_OFDM_RATE_6MB_MASK		(1<<4)
++#define IEEE80211_OFDM_RATE_9MB_MASK		(1<<5)
++#define IEEE80211_OFDM_RATE_12MB_MASK		(1<<6)
++#define IEEE80211_OFDM_RATE_18MB_MASK		(1<<7)
++#define IEEE80211_OFDM_RATE_24MB_MASK		(1<<8)
++#define IEEE80211_OFDM_RATE_36MB_MASK		(1<<9)
++#define IEEE80211_OFDM_RATE_48MB_MASK		(1<<10)
++#define IEEE80211_OFDM_RATE_54MB_MASK		(1<<11)
++
++#define IEEE80211_CCK_RATES_MASK	        0x0000000F
++#define IEEE80211_CCK_BASIC_RATES_MASK	(IEEE80211_CCK_RATE_1MB_MASK | \
++	IEEE80211_CCK_RATE_2MB_MASK)
++#define IEEE80211_CCK_DEFAULT_RATES_MASK	(IEEE80211_CCK_BASIC_RATES_MASK | \
++        IEEE80211_CCK_RATE_5MB_MASK | \
++        IEEE80211_CCK_RATE_11MB_MASK)
++
++#define IEEE80211_OFDM_RATES_MASK		0x00000FF0
++#define IEEE80211_OFDM_BASIC_RATES_MASK	(IEEE80211_OFDM_RATE_6MB_MASK | \
++	IEEE80211_OFDM_RATE_12MB_MASK | \
++	IEEE80211_OFDM_RATE_24MB_MASK)
++#define IEEE80211_OFDM_DEFAULT_RATES_MASK	(IEEE80211_OFDM_BASIC_RATES_MASK | \
++	IEEE80211_OFDM_RATE_9MB_MASK  | \
++	IEEE80211_OFDM_RATE_18MB_MASK | \
++	IEEE80211_OFDM_RATE_36MB_MASK | \
++	IEEE80211_OFDM_RATE_48MB_MASK | \
++	IEEE80211_OFDM_RATE_54MB_MASK)
++#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
++                                IEEE80211_CCK_DEFAULT_RATES_MASK)
++
++#define IEEE80211_NUM_OFDM_RATES	    8
++#define IEEE80211_NUM_CCK_RATES	            4
++#define IEEE80211_OFDM_SHIFT_MASK_A         4
++
++
++
++
++/* NOTE: This data is for statistical purposes; not all hardware provides this
++ *       information for frames received.  Not setting these will not cause
++ *       any adverse affects. */
++struct ieee80211_rx_stats {
++	//u32 mac_time[2];
++	s8 rssi;
++	u8 signal;
++	u8 noise;
++	u8 received_channel;
++	u16 rate; /* in 100 kbps */
++	//u8 control;
++	u8 mask;
++	u8 freq;
++	u16 len;
++};
++
++/* IEEE 802.11 requires that STA supports concurrent reception of at least
++ * three fragmented frames. This define can be increased to support more
++ * concurrent frames, but it should be noted that each entry can consume about
++ * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
++#define IEEE80211_FRAG_CACHE_LEN 4
++
++struct ieee80211_frag_entry {
++	u32 first_frag_time;
++	uint seq;
++	uint last_frag;
++	uint qos;   //jackson
++	uint tid;	//jackson
++	struct sk_buff *skb;
++	u8 src_addr[ETH_ALEN];
++	u8 dst_addr[ETH_ALEN];
++};
++
++#ifndef PLATFORM_FREEBSD //Baron BSD has already defined
++struct ieee80211_stats {
++	uint tx_unicast_frames;
++	uint tx_multicast_frames;
++	uint tx_fragments;
++	uint tx_unicast_octets;
++	uint tx_multicast_octets;
++	uint tx_deferred_transmissions;
++	uint tx_single_retry_frames;
++	uint tx_multiple_retry_frames;
++	uint tx_retry_limit_exceeded;
++	uint tx_discards;
++	uint rx_unicast_frames;
++	uint rx_multicast_frames;
++	uint rx_fragments;
++	uint rx_unicast_octets;
++	uint rx_multicast_octets;
++	uint rx_fcs_errors;
++	uint rx_discards_no_buffer;
++	uint tx_discards_wrong_sa;
++	uint rx_discards_undecryptable;
++	uint rx_message_in_msg_fragments;
++	uint rx_message_in_bad_msg_fragments;
++};
++#endif //PLATFORM_FREEBSD
++struct ieee80211_softmac_stats{
++	uint rx_ass_ok;
++	uint rx_ass_err;
++	uint rx_probe_rq;
++	uint tx_probe_rs;
++	uint tx_beacons;
++	uint rx_auth_rq;
++	uint rx_auth_rs_ok;
++	uint rx_auth_rs_err;
++	uint tx_auth_rq;
++	uint no_auth_rs;
++	uint no_ass_rs;
++	uint tx_ass_rq;
++	uint rx_ass_rq;
++	uint tx_probe_rq;
++	uint reassoc;
++	uint swtxstop;
++	uint swtxawake;
++};
++
++#define SEC_KEY_1         (1<<0)
++#define SEC_KEY_2         (1<<1)
++#define SEC_KEY_3         (1<<2)
++#define SEC_KEY_4         (1<<3)
++#define SEC_ACTIVE_KEY    (1<<4)
++#define SEC_AUTH_MODE     (1<<5)
++#define SEC_UNICAST_GROUP (1<<6)
++#define SEC_LEVEL         (1<<7)
++#define SEC_ENABLED       (1<<8)
++
++#define SEC_LEVEL_0      0 /* None */
++#define SEC_LEVEL_1      1 /* WEP 40 and 104 bit */
++#define SEC_LEVEL_2      2 /* Level 1 + TKIP */
++#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
++#define SEC_LEVEL_3      4 /* Level 2 + CCMP */
++
++#define WEP_KEYS 4
++#define WEP_KEY_LEN 13
++
++#ifdef CONFIG_IEEE80211W
++#define BIP_MAX_KEYID 5
++#define BIP_AAD_SIZE  20
++#endif //CONFIG_IEEE80211W
++
++#if defined(PLATFORM_LINUX) || defined(CONFIG_RTL8711FW)
++
++struct ieee80211_security {
++	u16 active_key:2,
++            enabled:1,
++	    auth_mode:2,
++            auth_algo:4,
++            unicast_uses_group:1;
++	u8 key_sizes[WEP_KEYS];
++	u8 keys[WEP_KEYS][WEP_KEY_LEN];
++	u8 level;
++	u16 flags;
++} __attribute__ ((packed));
++
++#endif
++
++#ifdef PLATFORM_WINDOWS
++
++#pragma pack(1)
++struct ieee80211_security {
++	u16 active_key:2,
++            enabled:1,
++	    auth_mode:2,
++            auth_algo:4,
++            unicast_uses_group:1;
++	u8 key_sizes[WEP_KEYS];
++	u8 keys[WEP_KEYS][WEP_KEY_LEN];
++	u8 level;
++	u16 flags;
++} ;
++#pragma pack()
++
++#endif
++
++/*
++
++ 802.11 data frame from AP
++
++      ,-------------------------------------------------------------------.
++Bytes |  2   |  2   |    6    |    6    |    6    |  2   | 0..2312 |   4  |
++      |------|------|---------|---------|---------|------|---------|------|
++Desc. | ctrl | dura |  DA/RA  |   TA    |    SA   | Sequ |  frame  |  fcs |
++      |      | tion | (BSSID) |         |         | ence |  data   |      |
++      `-------------------------------------------------------------------'
++
++Total: 28-2340 bytes
++
++*/
++
++struct ieee80211_header_data {
++	u16 frame_ctl;
++	u16 duration_id;
++	u8 addr1[6];
++	u8 addr2[6];
++	u8 addr3[6];
++	u16 seq_ctrl;
++};
++
++#define BEACON_PROBE_SSID_ID_POSITION 12
++
++/* Management Frame Information Element Types */
++#define MFIE_TYPE_SSID       0
++#define MFIE_TYPE_RATES      1
++#define MFIE_TYPE_FH_SET     2
++#define MFIE_TYPE_DS_SET     3
++#define MFIE_TYPE_CF_SET     4
++#define MFIE_TYPE_TIM        5
++#define MFIE_TYPE_IBSS_SET   6
++#define MFIE_TYPE_CHALLENGE  16
++#define MFIE_TYPE_ERP        42
++#define MFIE_TYPE_RSN	     48
++#define MFIE_TYPE_RATES_EX   50
++#define MFIE_TYPE_GENERIC    221
++
++#if defined(PLATFORM_LINUX) || defined(CONFIG_RTL8711FW)
++
++struct ieee80211_info_element_hdr {
++	u8 id;
++	u8 len;
++} __attribute__ ((packed));
++
++struct ieee80211_info_element {
++	u8 id;
++	u8 len;
++	u8 data[0];
++} __attribute__ ((packed));
++#endif
++
++#ifdef PLATFORM_WINDOWS
++
++#pragma pack(1)
++struct ieee80211_info_element_hdr {
++	u8 id;
++	u8 len;
++} ;
++
++struct ieee80211_info_element {
++	u8 id;
++	u8 len;
++	u8 data[0];
++} ;
++#pragma pack()
++
++#endif
++
++
++/*
++ * These are the data types that can make up management packets
++ *
++	u16 auth_algorithm;
++	u16 auth_sequence;
++	u16 beacon_interval;
++	u16 capability;
++	u8 current_ap[ETH_ALEN];
++	u16 listen_interval;
++	struct {
++		u16 association_id:14, reserved:2;
++	} __attribute__ ((packed));
++	u32 time_stamp[2];
++	u16 reason;
++	u16 status;
++*/
++
++#define IEEE80211_DEFAULT_TX_ESSID "Penguin"
++#define IEEE80211_DEFAULT_BASIC_RATE 10
++
++
++#if defined(PLATFORM_LINUX) || defined(CONFIG_RTL8711FW)
++
++
++struct ieee80211_authentication {
++	struct ieee80211_header_data header;
++	u16 algorithm;
++	u16 transaction;
++	u16 status;
++	//struct ieee80211_info_element_hdr info_element;
++} __attribute__ ((packed));
++
++
++struct ieee80211_probe_response {
++	struct ieee80211_header_data header;
++	u32 time_stamp[2];
++	u16 beacon_interval;
++	u16 capability;
++	struct ieee80211_info_element info_element;
++} __attribute__ ((packed));
++
++struct ieee80211_probe_request {
++	struct ieee80211_header_data header;
++	/*struct ieee80211_info_element info_element;*/
++} __attribute__ ((packed));
++
++struct ieee80211_assoc_request_frame {
++	struct rtw_ieee80211_hdr_3addr header;
++	u16 capability;
++	u16 listen_interval;
++	//u8 current_ap[ETH_ALEN];
++	struct ieee80211_info_element_hdr info_element;
++} __attribute__ ((packed));
++
++struct ieee80211_assoc_response_frame {
++	struct rtw_ieee80211_hdr_3addr header;
++	u16 capability;
++	u16 status;
++	u16 aid;
++//	struct ieee80211_info_element info_element; /* supported rates */
++} __attribute__ ((packed));
++#endif
++
++
++
++#ifdef PLATFORM_WINDOWS
++
++#pragma pack(1)
++
++struct ieee80211_authentication {
++	struct ieee80211_header_data header;
++	u16 algorithm;
++	u16 transaction;
++	u16 status;
++	//struct ieee80211_info_element_hdr info_element;
++} ;
++
++
++struct ieee80211_probe_response {
++	struct ieee80211_header_data header;
++	u32 time_stamp[2];
++	u16 beacon_interval;
++	u16 capability;
++	struct ieee80211_info_element info_element;
++} ;
++
++struct ieee80211_probe_request {
++	struct ieee80211_header_data header;
++	/*struct ieee80211_info_element info_element;*/
++} ;
++
++struct ieee80211_assoc_request_frame {
++	struct rtw_ieee80211_hdr_3addr header;
++	u16 capability;
++	u16 listen_interval;
++	//u8 current_ap[ETH_ALEN];
++	struct ieee80211_info_element_hdr info_element;
++} ;
++
++struct ieee80211_assoc_response_frame {
++	struct rtw_ieee80211_hdr_3addr header;
++	u16 capability;
++	u16 status;
++	u16 aid;
++//	struct ieee80211_info_element info_element; /* supported rates */
++};
++
++#pragma pack()
++
++#endif
++
++
++
++
++struct ieee80211_txb {
++	u8 nr_frags;
++	u8 encrypted;
++	u16 reserved;
++	u16 frag_size;
++	u16 payload_size;
++	struct sk_buff *fragments[0];
++};
++
++
++/* SWEEP TABLE ENTRIES NUMBER*/
++#define MAX_SWEEP_TAB_ENTRIES		  42
++#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET  7
++/* MAX_RATES_LENGTH needs to be 12.  The spec says 8, and many APs
++ * only use 8, and then use extended rates for the remaining supported
++ * rates.  Other APs, however, stick all of their supported rates on the
++ * main rates information element... */
++#define MAX_RATES_LENGTH                  ((u8)12)
++#define MAX_RATES_EX_LENGTH               ((u8)16)
++#define MAX_NETWORK_COUNT                  128
++#define MAX_CHANNEL_NUMBER                 161
++#define IEEE80211_SOFTMAC_SCAN_TIME	  400
++//(HZ / 2)
++#define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2)
++
++#define CRC_LENGTH                 4U
++
++#define MAX_WPA_IE_LEN (256)
++#define MAX_WPS_IE_LEN (512)
++#define MAX_P2P_IE_LEN (256)
++#define MAX_WFD_IE_LEN (128)
++
++#define NETWORK_EMPTY_ESSID (1<<0)
++#define NETWORK_HAS_OFDM    (1<<1)
++#define NETWORK_HAS_CCK     (1<<2)
++
++#define IEEE80211_DTIM_MBCAST 4
++#define IEEE80211_DTIM_UCAST 2
++#define IEEE80211_DTIM_VALID 1
++#define IEEE80211_DTIM_INVALID 0
++
++#define IEEE80211_PS_DISABLED 0
++#define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST
++#define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
++#define IW_ESSID_MAX_SIZE 32
++#if 0
++struct ieee80211_network {
++	/* These entries are used to identify a unique network */
++	u8 bssid[ETH_ALEN];
++	u8 channel;
++	/* Ensure null-terminated for any debug msgs */
++	u8 ssid[IW_ESSID_MAX_SIZE + 1];
++	u8 ssid_len;
++	u8	rssi;	//relative signal strength
++	u8	sq;		//signal quality
++
++	/* These are network statistics */
++	//struct ieee80211_rx_stats stats;
++	u16 capability;
++	u16	aid;
++	u8 rates[MAX_RATES_LENGTH];
++	u8 rates_len;
++	u8 rates_ex[MAX_RATES_EX_LENGTH];
++	u8 rates_ex_len;
++	
++	u8 edca_parmsets[18];
++		
++	u8 mode;
++	u8 flags;
++	u8 time_stamp[8];
++	u16 beacon_interval;
++	u16 listen_interval;
++	u16 atim_window;
++	u8 wpa_ie[MAX_WPA_IE_LEN];
++	size_t wpa_ie_len;
++	u8 rsn_ie[MAX_WPA_IE_LEN];
++	size_t rsn_ie_len;
++	u8 country[6];
++	u8 dtim_period;
++	u8 dtim_data;
++	u8 power_constraint;
++	u8 qosinfo;
++	u8 qbssload[5];
++	u8 network_type;
++	int join_res;
++	unsigned long	last_scanned;	
++};
++#endif
++/*
++join_res:
++-1: authentication fail
++-2: association fail
++> 0: TID
++*/
++
++#ifndef PLATFORM_FREEBSD //Baron BSD has already defined
++
++enum ieee80211_state {
++
++	/* the card is not linked at all */
++	IEEE80211_NOLINK = 0,
++	
++	/* IEEE80211_ASSOCIATING* are for BSS client mode
++	 * the driver shall not perform RX filtering unless
++	 * the state is LINKED.
++	 * The driver shall just check for the state LINKED and
++	 * defaults to NOLINK for ALL the other states (including
++	 * LINKED_SCANNING)
++	 */
++	
++	/* the association procedure will start (wq scheduling)*/
++	IEEE80211_ASSOCIATING,
++	IEEE80211_ASSOCIATING_RETRY,
++	
++	/* the association procedure is sending AUTH request*/
++	IEEE80211_ASSOCIATING_AUTHENTICATING,
++	
++	/* the association procedure has successfully authentcated
++	 * and is sending association request
++	 */
++	IEEE80211_ASSOCIATING_AUTHENTICATED,
++	
++	/* the link is ok. the card associated to a BSS or linked
++	 * to a ibss cell or acting as an AP and creating the bss
++	 */
++	IEEE80211_LINKED,
++	
++	/* same as LINKED, but the driver shall apply RX filter
++	 * rules as we are in NO_LINK mode. As the card is still
++	 * logically linked, but it is doing a syncro site survey
++	 * then it will be back to LINKED state.
++	 */
++	IEEE80211_LINKED_SCANNING,
++	
++};
++#endif //PLATFORM_FREEBSD
++
++#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
++#define DEFAULT_FTS 2346
++#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
++#define MAC_ARG(x) ((u8*)(x))[0],((u8*)(x))[1],((u8*)(x))[2],((u8*)(x))[3],((u8*)(x))[4],((u8*)(x))[5]
++
++#ifdef PLATFORM_FREEBSD //Baron change func to macro
++#define is_multicast_mac_addr(Addr) ((((Addr[0]) & 0x01) == 0x01) && ((Addr[0]) != 0xff))
++#define is_broadcast_mac_addr(Addr) ((((Addr[0]) & 0xff) == 0xff) && (((Addr[1]) & 0xff) == 0xff) && \
++(((Addr[2]) & 0xff) == 0xff) && (((Addr[3]) & 0xff) == 0xff) && (((Addr[4]) & 0xff) == 0xff) && \
++(((Addr[5]) & 0xff) == 0xff))
++#else
++extern __inline int is_multicast_mac_addr(const u8 *addr)
++{
++        return ((addr[0] != 0xff) && (0x01 & addr[0]));
++}
++
++extern __inline int is_broadcast_mac_addr(const u8 *addr)
++{
++	return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&   \
++		(addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
++}
++
++extern __inline int is_zero_mac_addr(const u8 *addr)
++{
++	return ((addr[0] == 0x00) && (addr[1] == 0x00) && (addr[2] == 0x00) &&   \
++		(addr[3] == 0x00) && (addr[4] == 0x00) && (addr[5] == 0x00));
++}
++#endif //PLATFORM_FREEBSD
++
++#define CFG_IEEE80211_RESERVE_FCS (1<<0)
++#define CFG_IEEE80211_COMPUTE_FCS (1<<1)
++
++typedef struct tx_pending_t{
++	int frag;
++	struct ieee80211_txb *txb;
++}tx_pending_t;
++
++
++
++#define MAXTID	16
++
++#define IEEE_A            (1<<0)
++#define IEEE_B            (1<<1)
++#define IEEE_G            (1<<2)
++#define IEEE_MODE_MASK    (IEEE_A|IEEE_B|IEEE_G)
++
++//Baron move to ieee80211.c
++int ieee80211_is_empty_essid(const char *essid, int essid_len);
++int ieee80211_get_hdrlen(u16 fc);
++
++#if 0
++/* Action frame categories (IEEE 802.11-2007, 7.3.1.11, Table 7-24) */
++#define WLAN_ACTION_SPECTRUM_MGMT 0
++#define WLAN_ACTION_QOS 1
++#define WLAN_ACTION_DLS 2
++#define WLAN_ACTION_BLOCK_ACK 3
++#define WLAN_ACTION_RADIO_MEASUREMENT 5
++#define WLAN_ACTION_FT 6
++#define WLAN_ACTION_SA_QUERY 8
++#define WLAN_ACTION_WMM 17
++#endif
++
++
++/* Action category code */
++enum rtw_ieee80211_category {
++	RTW_WLAN_CATEGORY_SPECTRUM_MGMT = 0,
++	RTW_WLAN_CATEGORY_QOS = 1,
++	RTW_WLAN_CATEGORY_DLS = 2,
++	RTW_WLAN_CATEGORY_BACK = 3,
++	RTW_WLAN_CATEGORY_PUBLIC = 4, //IEEE 802.11 public action frames
++	RTW_WLAN_CATEGORY_RADIO_MEASUREMENT  = 5,
++	RTW_WLAN_CATEGORY_FT = 6,
++	RTW_WLAN_CATEGORY_HT = 7,
++	RTW_WLAN_CATEGORY_SA_QUERY = 8,
++	RTW_WLAN_CATEGORY_UNPROTECTED_WNM = 11, // add for CONFIG_IEEE80211W, none 11w also can use
++	RTW_WLAN_CATEGORY_TDLS = 12,
++	RTW_WLAN_CATEGORY_SELF_PROTECTED = 15, // add for CONFIG_IEEE80211W, none 11w also can use
++	RTW_WLAN_CATEGORY_WMM = 17,
++	RTW_WLAN_CATEGORY_P2P = 0x7f,//P2P action frames
++};
++
++/* SPECTRUM_MGMT action code */
++enum rtw_ieee80211_spectrum_mgmt_actioncode {
++	RTW_WLAN_ACTION_SPCT_MSR_REQ = 0,
++	RTW_WLAN_ACTION_SPCT_MSR_RPRT = 1,
++	RTW_WLAN_ACTION_SPCT_TPC_REQ = 2,
++	RTW_WLAN_ACTION_SPCT_TPC_RPRT = 3,
++	RTW_WLAN_ACTION_SPCT_CHL_SWITCH = 4,
++	RTW_WLAN_ACTION_SPCT_EXT_CHL_SWITCH = 5,
++};
++
++enum _PUBLIC_ACTION{
++	ACT_PUBLIC_BSSCOEXIST = 0, // 20/40 BSS Coexistence
++	ACT_PUBLIC_DSE_ENABLE = 1,
++	ACT_PUBLIC_DSE_DEENABLE = 2,
++	ACT_PUBLIC_DSE_REG_LOCATION = 3,
++	ACT_PUBLIC_EXT_CHL_SWITCH = 4,
++	ACT_PUBLIC_DSE_MSR_REQ = 5,
++	ACT_PUBLIC_DSE_MSR_RPRT = 6,
++	ACT_PUBLIC_MP = 7, // Measurement Pilot
++	ACT_PUBLIC_DSE_PWR_CONSTRAINT = 8,
++	ACT_PUBLIC_VENDOR = 9, // for WIFI_DIRECT
++	ACT_PUBLIC_GAS_INITIAL_REQ = 10,
++	ACT_PUBLIC_GAS_INITIAL_RSP = 11,
++	ACT_PUBLIC_GAS_COMEBACK_REQ = 12,
++	ACT_PUBLIC_GAS_COMEBACK_RSP = 13,
++	ACT_PUBLIC_TDLS_DISCOVERY_RSP = 14,
++	ACT_PUBLIC_LOCATION_TRACK = 15,
++	ACT_PUBLIC_MAX
++};
++
++#ifdef CONFIG_TDLS
++enum TDLS_ACTION_FIELD{
++	TDLS_SETUP_REQUEST = 0,
++	TDLS_SETUP_RESPONSE = 1,
++	TDLS_SETUP_CONFIRM = 2,
++	TDLS_TEARDOWN = 3,
++	TDLS_PEER_TRAFFIC_INDICATION = 4,
++	TDLS_CHANNEL_SWITCH_REQUEST = 5,
++	TDLS_CHANNEL_SWITCH_RESPONSE = 6,
++	TDLS_PEER_PSM_REQUEST = 7,
++	TDLS_PEER_PSM_RESPONSE = 8,
++	TDLS_PEER_TRAFFIC_RESPONSE = 9,
++	TDLS_DISCOVERY_REQUEST = 10,
++	TDLS_DISCOVERY_RESPONSE = 14,	//it's used in public action frame
++};
++
++#define	TUNNELED_PROBE_REQ	15
++#define	TUNNELED_PROBE_RSP	16
++#endif //CONFIG_TDLS
++
++/* BACK action code */
++enum rtw_ieee80211_back_actioncode {
++	RTW_WLAN_ACTION_ADDBA_REQ = 0,
++	RTW_WLAN_ACTION_ADDBA_RESP = 1,
++	RTW_WLAN_ACTION_DELBA = 2,
++};
++
++/* HT features action code */
++enum rtw_ieee80211_ht_actioncode {
++	RTW_WLAN_ACTION_NOTIFY_CH_WIDTH = 0,
++       RTW_WLAN_ACTION_SM_PS = 1,
++       RTW_WLAN_ACTION_PSPM = 2,
++       RTW_WLAN_ACTION_PCO_PHASE = 3,
++       RTW_WLAN_ACTION_MIMO_CSI_MX = 4,
++       RTW_WLAN_ACTION_MIMO_NONCP_BF = 5,
++       RTW_WLAN_ACTION_MIMP_CP_BF = 6,
++       RTW_WLAN_ACTION_ASEL_INDICATES_FB = 7,
++       RTW_WLAN_ACTION_HI_INFO_EXCHG = 8,
++};
++
++/* BACK (block-ack) parties */
++enum rtw_ieee80211_back_parties {
++	RTW_WLAN_BACK_RECIPIENT = 0,
++	RTW_WLAN_BACK_INITIATOR = 1,
++	RTW_WLAN_BACK_TIMER = 2,
++};
++
++
++#define OUI_MICROSOFT 0x0050f2 /* Microsoft (also used in Wi-Fi specs)
++				* 00:50:F2 */
++#ifndef PLATFORM_FREEBSD //Baron BSD has defined
++#define WME_OUI_TYPE 2
++#endif //PLATFORM_FREEBSD
++#define WME_OUI_SUBTYPE_INFORMATION_ELEMENT 0
++#define WME_OUI_SUBTYPE_PARAMETER_ELEMENT 1
++#define WME_OUI_SUBTYPE_TSPEC_ELEMENT 2
++#define WME_VERSION 1
++
++#define WME_ACTION_CODE_SETUP_REQUEST 0
++#define WME_ACTION_CODE_SETUP_RESPONSE 1
++#define WME_ACTION_CODE_TEARDOWN 2
++
++#define WME_SETUP_RESPONSE_STATUS_ADMISSION_ACCEPTED 0
++#define WME_SETUP_RESPONSE_STATUS_INVALID_PARAMETERS 1
++#define WME_SETUP_RESPONSE_STATUS_REFUSED 3
++
++#define WME_TSPEC_DIRECTION_UPLINK 0
++#define WME_TSPEC_DIRECTION_DOWNLINK 1
++#define WME_TSPEC_DIRECTION_BI_DIRECTIONAL 3
++
++
++#define OUI_BROADCOM 0x00904c /* Broadcom (Epigram) */
++
++#define VENDOR_HT_CAPAB_OUI_TYPE 0x33 /* 00-90-4c:0x33 */
++
++/**
++ * enum rtw_ieee80211_channel_flags - channel flags
++ *
++ * Channel flags set by the regulatory control code.
++ *
++ * @RTW_IEEE80211_CHAN_DISABLED: This channel is disabled.
++ * @RTW_IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
++ *      on this channel.
++ * @RTW_IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
++ * @RTW_IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
++ * @RTW_IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel
++ *      is not permitted.
++ * @RTW_IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel
++ *      is not permitted.
++ */
++  enum rtw_ieee80211_channel_flags {
++          RTW_IEEE80211_CHAN_DISABLED         = 1<<0,
++          RTW_IEEE80211_CHAN_PASSIVE_SCAN     = 1<<1,
++          RTW_IEEE80211_CHAN_NO_IBSS          = 1<<2,
++          RTW_IEEE80211_CHAN_RADAR            = 1<<3,
++          RTW_IEEE80211_CHAN_NO_HT40PLUS      = 1<<4,
++          RTW_IEEE80211_CHAN_NO_HT40MINUS     = 1<<5,
++  };
++  
++  #define RTW_IEEE80211_CHAN_NO_HT40 \
++          (RTW_IEEE80211_CHAN_NO_HT40PLUS | RTW_IEEE80211_CHAN_NO_HT40MINUS)
++
++/* Represent channel details, subset of ieee80211_channel */
++struct rtw_ieee80211_channel {
++	//enum ieee80211_band band;
++	//u16 center_freq;
++	u16 hw_value;
++	u32 flags;
++	//int max_antenna_gain;
++	//int max_power;
++	//int max_reg_power;
++	//bool beacon_found;
++	//u32 orig_flags;
++	//int orig_mag;
++	//int orig_mpwr;
++}; 
++
++#define CHAN_FMT \
++	/*"band:%d, "*/ \
++	/*"center_freq:%u, "*/ \
++	"hw_value:%u, " \
++	"flags:0x%08x" \
++	/*"max_antenna_gain:%d\n"*/ \
++	/*"max_power:%d\n"*/ \
++	/*"max_reg_power:%d\n"*/ \
++	/*"beacon_found:%u\n"*/ \
++	/*"orig_flags:0x%08x\n"*/ \
++	/*"orig_mag:%d\n"*/ \
++	/*"orig_mpwr:%d\n"*/ 
++
++#define CHAN_ARG(channel) \
++	/*(channel)->band*/ \
++	/*, (channel)->center_freq*/ \
++	(channel)->hw_value \
++	, (channel)->flags \
++	/*, (channel)->max_antenna_gain*/ \
++	/*, (channel)->max_power*/ \
++	/*, (channel)->max_reg_power*/ \
++	/*, (channel)->beacon_found*/ \
++	/*, (channel)->orig_flags*/ \
++	/*, (channel)->orig_mag*/ \
++	/*, (channel)->orig_mpwr*/ \
++
++/* Parsed Information Elements */
++struct rtw_ieee802_11_elems {
++	u8 *ssid;
++	u8 ssid_len;
++	u8 *supp_rates;
++	u8 supp_rates_len;
++	u8 *fh_params;
++	u8 fh_params_len;
++	u8 *ds_params;
++	u8 ds_params_len;
++	u8 *cf_params;
++	u8 cf_params_len;
++	u8 *tim;
++	u8 tim_len;
++	u8 *ibss_params;
++	u8 ibss_params_len;
++	u8 *challenge;
++	u8 challenge_len;
++	u8 *erp_info;
++	u8 erp_info_len;
++	u8 *ext_supp_rates;
++	u8 ext_supp_rates_len;
++	u8 *wpa_ie;
++	u8 wpa_ie_len;
++	u8 *rsn_ie;
++	u8 rsn_ie_len;
++	u8 *wme;
++	u8 wme_len;
++	u8 *wme_tspec;
++	u8 wme_tspec_len;
++	u8 *wps_ie;
++	u8 wps_ie_len;
++	u8 *power_cap;
++	u8 power_cap_len;
++	u8 *supp_channels;
++	u8 supp_channels_len;
++	u8 *mdie;
++	u8 mdie_len;
++	u8 *ftie;
++	u8 ftie_len;
++	u8 *timeout_int;
++	u8 timeout_int_len;
++	u8 *ht_capabilities;
++	u8 ht_capabilities_len;
++	u8 *ht_operation;
++	u8 ht_operation_len;
++	u8 *vendor_ht_cap;
++	u8 vendor_ht_cap_len;
++};
++
++typedef enum { ParseOK = 0, ParseUnknown = 1, ParseFailed = -1 } ParseRes;
++
++ParseRes rtw_ieee802_11_parse_elems(u8 *start, uint len,
++				struct rtw_ieee802_11_elems *elems,
++				int show_errors);
++
++u8 *rtw_set_fixed_ie(unsigned char *pbuf, unsigned int len, unsigned char *source, unsigned int *frlen);
++u8 *rtw_set_ie(u8 *pbuf, sint index, uint len, u8 *source, uint *frlen);
++
++enum secondary_ch_offset {
++	SCN = 0, /* no secondary channel */
++	SCA = 1, /* secondary channel above */
++	SCB = 3,  /* secondary channel below */
++};
++u8 secondary_ch_offset_to_hal_ch_offset(u8 ch_offset);
++u8 hal_ch_offset_to_secondary_ch_offset(u8 ch_offset);
++u8 *rtw_set_ie_ch_switch(u8 *buf, u32 *buf_len, u8 ch_switch_mode, u8 new_ch, u8 ch_switch_cnt);
++u8 *rtw_set_ie_secondary_ch_offset(u8 *buf, u32 *buf_len, u8 secondary_ch_offset);
++u8 *rtw_set_ie_mesh_ch_switch_parm(u8 *buf, u32 *buf_len, u8 ttl, u8 flags, u16 reason, u16 precedence);
++
++u8 *rtw_get_ie(u8*pbuf, sint index, sint *len, sint limit);
++u8 *rtw_get_ie_ex(u8 *in_ie, uint in_len, u8 eid, u8 *oui, u8 oui_len, u8 *ie, uint *ielen);
++int rtw_ies_remove_ie(u8 *ies, uint *ies_len, uint offset, u8 eid, u8 *oui, u8 oui_len);
++
++void rtw_set_supported_rate(u8* SupportedRates, uint mode) ;
++
++unsigned char *rtw_get_wpa_ie(unsigned char *pie, int *wpa_ie_len, int limit);
++unsigned char *rtw_get_wpa2_ie(unsigned char *pie, int *rsn_ie_len, int limit);
++int rtw_get_wpa_cipher_suite(u8 *s);
++int rtw_get_wpa2_cipher_suite(u8 *s);
++int rtw_parse_wpa_ie(u8* wpa_ie, int wpa_ie_len, int *group_cipher, int *pairwise_cipher);
++int rtw_parse_wpa2_ie(u8* wpa_ie, int wpa_ie_len, int *group_cipher, int *pairwise_cipher);
++
++int rtw_get_sec_ie(u8 *in_ie,uint in_len,u8 *rsn_ie,u16 *rsn_len,u8 *wpa_ie,u16 *wpa_len);
++
++u8 rtw_is_wps_ie(u8 *ie_ptr, uint *wps_ielen);
++u8 *rtw_get_wps_ie(u8 *in_ie, uint in_len, u8 *wps_ie, uint *wps_ielen);
++u8 *rtw_get_wps_attr(u8 *wps_ie, uint wps_ielen, u16 target_attr_id ,u8 *buf_attr, u32 *len_attr);
++u8 *rtw_get_wps_attr_content(u8 *wps_ie, uint wps_ielen, u16 target_attr_id ,u8 *buf_content, uint *len_content);
++
++/**
++ * for_each_ie - iterate over continuous IEs
++ * @ie:
++ * @buf:
++ * @buf_len:
++ */
++#define for_each_ie(ie, buf, buf_len) \
++	for (ie = (void*)buf; (((u8*)ie) - ((u8*)buf) + 1) < buf_len; ie = (void*)(((u8*)ie) + *(((u8*)ie)+1) + 2))
++
++void dump_ies(u8 *buf, u32 buf_len);
++void dump_wps_ie(u8 *ie, u32 ie_len);
++
++#ifdef CONFIG_P2P
++u32 rtw_get_p2p_merged_ies_len(u8 *in_ie, u32 in_len);
++int rtw_p2p_merge_ies(u8 *in_ie, u32 in_len, u8 *merge_ie);
++void dump_p2p_ie(u8 *ie, u32 ie_len);
++u8 *rtw_get_p2p_ie(u8 *in_ie, int in_len, u8 *p2p_ie, uint *p2p_ielen);
++u8 *rtw_get_p2p_attr(u8 *p2p_ie, uint p2p_ielen, u8 target_attr_id ,u8 *buf_attr, u32 *len_attr);
++u8 *rtw_get_p2p_attr_content(u8 *p2p_ie, uint p2p_ielen, u8 target_attr_id ,u8 *buf_content, uint *len_content);
++u32 rtw_set_p2p_attr_content(u8 *pbuf, u8 attr_id, u16 attr_len, u8 *pdata_attr);
++void rtw_WLAN_BSSID_EX_remove_p2p_attr(WLAN_BSSID_EX *bss_ex, u8 attr_id);
++#endif
++
++#ifdef CONFIG_WFD
++int rtw_get_wfd_ie(u8 *in_ie, int in_len, u8 *wfd_ie, uint *wfd_ielen);
++int rtw_get_wfd_attr_content(u8 *wfd_ie, uint wfd_ielen, u8 target_attr_id ,u8 *attr_content, uint *attr_contentlen);
++#endif // CONFIG_WFD
++
++uint	rtw_get_rateset_len(u8	*rateset);
++
++struct registry_priv;
++int rtw_generate_ie(struct registry_priv *pregistrypriv);
++
++
++int rtw_get_bit_value_from_ieee_value(u8 val);
++
++uint	rtw_is_cckrates_included(u8 *rate);
++
++uint	rtw_is_cckratesonly_included(u8 *rate);
++
++int rtw_check_network_type(unsigned char *rate, int ratelen, int channel);
++
++void rtw_macaddr_cfg(u8 *mac_addr);
++
++u16 rtw_mcs_rate(u8 rf_type, u8 bw_40MHz, u8 short_GI_20, u8 short_GI_40, unsigned char * MCS_rate);
++
++int rtw_action_frame_parse(const u8 *frame, u32 frame_len, u8* category, u8 *action);
++const char *action_public_str(u8 action);
++
++#endif /* IEEE80211_H */
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/if_ether.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/if_ether.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/if_ether.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/if_ether.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,112 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++ 
++#ifndef _LINUX_IF_ETHER_H
++#define _LINUX_IF_ETHER_H
++
++/*
++ *	IEEE 802.3 Ethernet magic constants.  The frame sizes omit the preamble
++ *	and FCS/CRC (frame check sequence). 
++ */
++
++#define ETH_ALEN	6		/* Octets in one ethernet addr	 */
++#define ETH_HLEN	14		/* Total octets in header.	 */
++#define ETH_ZLEN	60		/* Min. octets in frame sans FCS */
++#define ETH_DATA_LEN	1500		/* Max. octets in payload	 */
++#define ETH_FRAME_LEN	1514		/* Max. octets in frame sans FCS */
++
++/*
++ *	These are the defined Ethernet Protocol ID's.
++ */
++
++#define ETH_P_LOOP	0x0060		/* Ethernet Loopback packet	*/
++#define ETH_P_PUP	0x0200		/* Xerox PUP packet		*/
++#define ETH_P_PUPAT	0x0201		/* Xerox PUP Addr Trans packet	*/
++#define ETH_P_IP	0x0800		/* Internet Protocol packet	*/
++#define ETH_P_X25	0x0805		/* CCITT X.25			*/
++#define ETH_P_ARP	0x0806		/* Address Resolution packet	*/
++#define	ETH_P_BPQ	0x08FF		/* G8BPQ AX.25 Ethernet Packet	[ NOT AN OFFICIALLY REGISTERED ID ] */
++#define ETH_P_IEEEPUP	0x0a00		/* Xerox IEEE802.3 PUP packet */
++#define ETH_P_IEEEPUPAT	0x0a01		/* Xerox IEEE802.3 PUP Addr Trans packet */
++#define ETH_P_DEC       0x6000          /* DEC Assigned proto           */
++#define ETH_P_DNA_DL    0x6001          /* DEC DNA Dump/Load            */
++#define ETH_P_DNA_RC    0x6002          /* DEC DNA Remote Console       */
++#define ETH_P_DNA_RT    0x6003          /* DEC DNA Routing              */
++#define ETH_P_LAT       0x6004          /* DEC LAT                      */
++#define ETH_P_DIAG      0x6005          /* DEC Diagnostics              */
++#define ETH_P_CUST      0x6006          /* DEC Customer use             */
++#define ETH_P_SCA       0x6007          /* DEC Systems Comms Arch       */
++#define ETH_P_RARP      0x8035		/* Reverse Addr Res packet	*/
++#define ETH_P_ATALK	0x809B		/* Appletalk DDP		*/
++#define ETH_P_AARP	0x80F3		/* Appletalk AARP		*/
++#define ETH_P_8021Q	0x8100          /* 802.1Q VLAN Extended Header  */
++#define ETH_P_IPX	0x8137		/* IPX over DIX			*/
++#define ETH_P_IPV6	0x86DD		/* IPv6 over bluebook		*/
++#define ETH_P_PPP_DISC	0x8863		/* PPPoE discovery messages     */
++#define ETH_P_PPP_SES	0x8864		/* PPPoE session messages	*/
++#define ETH_P_ATMMPOA	0x884c		/* MultiProtocol Over ATM	*/
++#define ETH_P_ATMFATE	0x8884		/* Frame-based ATM Transport
++					 * over Ethernet
++					 */
++
++/*
++ *	Non DIX types. Won't clash for 1500 types.
++ */
++ 
++#define ETH_P_802_3	0x0001		/* Dummy type for 802.3 frames  */
++#define ETH_P_AX25	0x0002		/* Dummy protocol id for AX.25  */
++#define ETH_P_ALL	0x0003		/* Every packet (be careful!!!) */
++#define ETH_P_802_2	0x0004		/* 802.2 frames 		*/
++#define ETH_P_SNAP	0x0005		/* Internal only		*/
++#define ETH_P_DDCMP     0x0006          /* DEC DDCMP: Internal only     */
++#define ETH_P_WAN_PPP   0x0007          /* Dummy type for WAN PPP frames*/
++#define ETH_P_PPP_MP    0x0008          /* Dummy type for PPP MP frames */
++#define ETH_P_LOCALTALK 0x0009		/* Localtalk pseudo type 	*/
++#define ETH_P_PPPTALK	0x0010		/* Dummy type for Atalk over PPP*/
++#define ETH_P_TR_802_2	0x0011		/* 802.2 frames 		*/
++#define ETH_P_MOBITEX	0x0015		/* Mobitex (kaz@cafe.net)	*/
++#define ETH_P_CONTROL	0x0016		/* Card specific control frames */
++#define ETH_P_IRDA	0x0017		/* Linux-IrDA			*/
++#define ETH_P_ECONET	0x0018		/* Acorn Econet			*/
++
++/*
++ *	This is an Ethernet frame header.
++ */
++ 
++struct ethhdr 
++{
++	unsigned char	h_dest[ETH_ALEN];	/* destination eth addr	*/
++	unsigned char	h_source[ETH_ALEN];	/* source ether addr	*/
++	unsigned short	h_proto;		/* packet type ID field	*/
++};
++
++struct _vlan {
++   unsigned short       h_vlan_TCI;                // Encapsulates priority and VLAN ID
++   unsigned short       h_vlan_encapsulated_proto;
++};
++
++
++
++#define get_vlan_id(pvlan) ((ntohs((unsigned short )pvlan->h_vlan_TCI)) & 0xfff)
++#define get_vlan_priority(pvlan) ((ntohs((unsigned short )pvlan->h_vlan_TCI))>>13)
++#define get_vlan_encap_proto(pvlan) (ntohs((unsigned short )pvlan->h_vlan_encapsulated_proto))
++
++
++#endif	/* _LINUX_IF_ETHER_H */
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/ioctl_cfg80211.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/ioctl_cfg80211.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/ioctl_cfg80211.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/ioctl_cfg80211.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,180 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __IOCTL_CFG80211_H__
++#define __IOCTL_CFG80211_H__ 
++
++#if defined(CONFIG_IOCTL_CFG80211) && !defined(CONFIG_CFG80211) && !defined(CONFIG_CFG80211_MODULE)
++	#error "Can't define CONFIG_IOCTL_CFG80211 because neither CONFIG_CFG80211 nor CONFIG_CFG80211_MODULE is defined in kernel"
++#endif
++#if defined(CONFIG_IOCTL_CFG80211) && LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35)
++	#error "We haven't verify our cfg80211 solution below kernel version 2.6.35"
++#endif
++
++#if defined(RTW_USE_CFG80211_STA_EVENT)
++	#undef CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER
++#endif
++
++struct rtw_wdev_invit_info {
++	u8 state; /* 0: req, 1:rep */
++	u8 peer_mac[ETH_ALEN];
++	u8 active;
++	u8 token;
++	u8 flags;
++	u8 status;
++	u8 req_op_ch;
++	u8 rsp_op_ch;
++};
++
++#define rtw_wdev_invit_info_init(invit_info) \
++	do { \
++		(invit_info)->state = 0xff; \
++		_rtw_memset((invit_info)->peer_mac, 0, ETH_ALEN); \
++		(invit_info)->active = 0xff; \
++		(invit_info)->token = 0; \
++		(invit_info)->flags = 0x00; \
++		(invit_info)->status = 0xff; \
++		(invit_info)->req_op_ch = 0; \
++		(invit_info)->rsp_op_ch = 0; \
++	} while (0)
++
++struct rtw_wdev_nego_info {
++	u8 state; /* 0: req, 1:rep, 3:conf */
++	u8 peer_mac[ETH_ALEN];
++	u8 active;
++	u8 token;
++	u8 status;
++	u8 req_intent;
++	u8 req_op_ch;
++	u8 req_listen_ch;
++	u8 rsp_intent;
++	u8 rsp_op_ch;
++	u8 conf_op_ch;
++};
++
++#define rtw_wdev_nego_info_init(nego_info) \
++	do { \
++		(nego_info)->state = 0xff; \
++		_rtw_memset((nego_info)->peer_mac, 0, ETH_ALEN); \
++		(nego_info)->active = 0xff; \
++		(nego_info)->token = 0; \
++		(nego_info)->status = 0xff; \
++		(nego_info)->req_intent = 0xff; \
++		(nego_info)->req_op_ch = 0; \
++		(nego_info)->req_listen_ch = 0; \
++		(nego_info)->rsp_intent = 0xff; \
++		(nego_info)->rsp_op_ch = 0; \
++		(nego_info)->conf_op_ch = 0; \
++	} while (0)
++
++struct rtw_wdev_priv
++{	
++	struct wireless_dev *rtw_wdev;
++	
++	_adapter *padapter;
++
++	struct cfg80211_scan_request *scan_request;
++	_lock scan_req_lock;
++
++	struct net_device *pmon_ndev;//for monitor interface
++	char ifname_mon[IFNAMSIZ + 1]; //interface name for monitor interface
++
++	u8 p2p_enabled;
++
++	u8 provdisc_req_issued;
++
++	struct rtw_wdev_invit_info invit_info;
++	struct rtw_wdev_nego_info nego_info;
++
++	u8 bandroid_scan;
++	bool block;
++	bool power_mgmt;
++
++#ifdef CONFIG_CONCURRENT_MODE
++	ATOMIC_T ro_ch_to;
++	ATOMIC_T switch_ch_to;	
++#endif	
++	
++};
++
++#define wdev_to_priv(w) ((struct rtw_wdev_priv *)(wdev_priv(w)))
++
++#define wiphy_to_adapter(x) (_adapter *)(((struct rtw_wdev_priv*)wiphy_priv(x))->padapter)
++
++#define wiphy_to_wdev(x) (struct wireless_dev *)(((struct rtw_wdev_priv*)wiphy_priv(x))->rtw_wdev)
++
++int rtw_wdev_alloc(_adapter *padapter, struct device *dev);
++void rtw_wdev_free(struct wireless_dev *wdev);
++void rtw_wdev_unregister(struct wireless_dev *wdev);
++
++void rtw_cfg80211_init_wiphy(_adapter *padapter);
++
++void rtw_cfg80211_surveydone_event_callback(_adapter *padapter);
++int rtw_cfg80211_check_bss(_adapter *padapter);
++void rtw_cfg80211_indicate_connect(_adapter *padapter);
++void rtw_cfg80211_indicate_disconnect(_adapter *padapter);
++void rtw_cfg80211_indicate_scan_done(struct rtw_wdev_priv *pwdev_priv, bool aborted);
++
++#ifdef CONFIG_AP_MODE
++void rtw_cfg80211_indicate_sta_assoc(_adapter *padapter, u8 *pmgmt_frame, uint frame_len);
++void rtw_cfg80211_indicate_sta_disassoc(_adapter *padapter, unsigned char *da, unsigned short reason);
++#endif //CONFIG_AP_MODE
++
++void rtw_cfg80211_issue_p2p_provision_request(_adapter *padapter, const u8 *buf, size_t len);
++void rtw_cfg80211_rx_p2p_action_public(_adapter *padapter, u8 *pmgmt_frame, uint frame_len);
++void rtw_cfg80211_rx_action_p2p(_adapter *padapter, u8 *pmgmt_frame, uint frame_len);
++void rtw_cfg80211_rx_action(_adapter *adapter, u8 *frame, uint frame_len, const char*msg);
++
++int rtw_cfg80211_set_mgnt_wpsp2pie(struct net_device *net, char *buf, int len, int type);
++
++bool rtw_cfg80211_pwr_mgmt(_adapter *adapter);
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,4,0))  && !defined(COMPAT_KERNEL_RELEASE)
++#define rtw_cfg80211_rx_mgmt(adapter, freq, sig_dbm, buf, len, gfp) cfg80211_rx_mgmt((adapter)->pnetdev, freq, buf, len, gfp)
++#elif (LINUX_VERSION_CODE < KERNEL_VERSION(3,6,0))
++#define rtw_cfg80211_rx_mgmt(adapter, freq, sig_dbm, buf, len, gfp) cfg80211_rx_mgmt((adapter)->pnetdev, freq, sig_dbm, buf, len, gfp)
++#else
++#define rtw_cfg80211_rx_mgmt(adapter, freq, sig_dbm, buf, len, gfp) cfg80211_rx_mgmt((adapter)->rtw_wdev, freq, sig_dbm, buf, len, gfp)
++#endif
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,4,0))  && !defined(COMPAT_KERNEL_RELEASE)
++#define rtw_cfg80211_send_rx_assoc(adapter, bss, buf, len) cfg80211_send_rx_assoc((adapter)->pnetdev, buf, len)
++#else
++#define rtw_cfg80211_send_rx_assoc(adapter, bss, buf, len) cfg80211_send_rx_assoc((adapter)->pnetdev, bss, buf, len)
++#endif
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,6,0))
++#define rtw_cfg80211_mgmt_tx_status(adapter, cookie, buf, len, ack, gfp) cfg80211_mgmt_tx_status((adapter)->pnetdev, cookie, buf, len, ack, gfp)
++#else
++#define rtw_cfg80211_mgmt_tx_status(adapter, cookie, buf, len, ack, gfp) cfg80211_mgmt_tx_status((adapter)->rtw_wdev, cookie, buf, len, ack, gfp)
++#endif
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,6,0))
++#define rtw_cfg80211_ready_on_channel(adapter, cookie, chan, channel_type, duration, gfp)  cfg80211_ready_on_channel((adapter)->pnetdev, cookie, chan, channel_type, duration, gfp)
++#define rtw_cfg80211_remain_on_channel_expired(adapter, cookie, chan, chan_type, gfp) cfg80211_remain_on_channel_expired((adapter)->pnetdev, cookie, chan, chan_type, gfp)
++#elif (LINUX_VERSION_CODE < KERNEL_VERSION(3,8,0))
++#define rtw_cfg80211_ready_on_channel(adapter, cookie, chan, channel_type, duration, gfp)  cfg80211_ready_on_channel((adapter)->rtw_wdev, cookie, chan, channel_type, duration, gfp)
++#define rtw_cfg80211_remain_on_channel_expired(adapter, cookie, chan, chan_type, gfp) cfg80211_remain_on_channel_expired((adapter)->rtw_wdev, cookie, chan, chan_type, gfp)
++#else
++#define rtw_cfg80211_ready_on_channel(adapter, cookie, chan, channel_type, duration, gfp)  cfg80211_ready_on_channel((adapter)->rtw_wdev, cookie, chan, duration, gfp)
++#define rtw_cfg80211_remain_on_channel_expired(adapter, cookie, chan, chan_type, gfp) cfg80211_remain_on_channel_expired((adapter)->rtw_wdev, cookie, chan, gfp)
++#endif
++
++#endif //__IOCTL_CFG80211_H__
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/ip.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/ip.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/ip.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/ip.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,141 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef _LINUX_IP_H
++#define _LINUX_IP_H
++#include <rtw_byteorder.h>
++
++/* SOL_IP socket options */
++
++#define IPTOS_TOS_MASK		0x1E
++#define IPTOS_TOS(tos)		((tos)&IPTOS_TOS_MASK)
++#define	IPTOS_LOWDELAY		0x10
++#define	IPTOS_THROUGHPUT	0x08
++#define	IPTOS_RELIABILITY	0x04
++#define	IPTOS_MINCOST		0x02
++
++#define IPTOS_PREC_MASK		0xE0
++#define IPTOS_PREC(tos)		((tos)&IPTOS_PREC_MASK)
++#define IPTOS_PREC_NETCONTROL           0xe0
++#define IPTOS_PREC_INTERNETCONTROL      0xc0
++#define IPTOS_PREC_CRITIC_ECP           0xa0
++#define IPTOS_PREC_FLASHOVERRIDE        0x80
++#define IPTOS_PREC_FLASH                0x60
++#define IPTOS_PREC_IMMEDIATE            0x40
++#define IPTOS_PREC_PRIORITY             0x20
++#define IPTOS_PREC_ROUTINE              0x00
++
++
++/* IP options */
++#define IPOPT_COPY		0x80
++#define IPOPT_CLASS_MASK	0x60
++#define IPOPT_NUMBER_MASK	0x1f
++
++#define	IPOPT_COPIED(o)		((o)&IPOPT_COPY)
++#define	IPOPT_CLASS(o)		((o)&IPOPT_CLASS_MASK)
++#define	IPOPT_NUMBER(o)		((o)&IPOPT_NUMBER_MASK)
++
++#define	IPOPT_CONTROL		0x00
++#define	IPOPT_RESERVED1		0x20
++#define	IPOPT_MEASUREMENT	0x40
++#define	IPOPT_RESERVED2		0x60
++
++#define IPOPT_END	(0 |IPOPT_CONTROL)
++#define IPOPT_NOOP	(1 |IPOPT_CONTROL)
++#define IPOPT_SEC	(2 |IPOPT_CONTROL|IPOPT_COPY)
++#define IPOPT_LSRR	(3 |IPOPT_CONTROL|IPOPT_COPY)
++#define IPOPT_TIMESTAMP	(4 |IPOPT_MEASUREMENT)
++#define IPOPT_RR	(7 |IPOPT_CONTROL)
++#define IPOPT_SID	(8 |IPOPT_CONTROL|IPOPT_COPY)
++#define IPOPT_SSRR	(9 |IPOPT_CONTROL|IPOPT_COPY)
++#define IPOPT_RA	(20|IPOPT_CONTROL|IPOPT_COPY)
++
++#define IPVERSION	4
++#define MAXTTL		255
++#define IPDEFTTL	64
++
++/* struct timestamp, struct route and MAX_ROUTES are removed.
++
++   REASONS: it is clear that nobody used them because:
++   - MAX_ROUTES value was wrong.
++   - "struct route" was wrong.
++   - "struct timestamp" had fatally misaligned bitfields and was completely unusable.
++ */
++
++#define IPOPT_OPTVAL 0
++#define IPOPT_OLEN   1
++#define IPOPT_OFFSET 2
++#define IPOPT_MINOFF 4
++#define MAX_IPOPTLEN 40
++#define IPOPT_NOP IPOPT_NOOP
++#define IPOPT_EOL IPOPT_END
++#define IPOPT_TS  IPOPT_TIMESTAMP
++
++#define	IPOPT_TS_TSONLY		0		/* timestamps only */
++#define	IPOPT_TS_TSANDADDR	1		/* timestamps and addresses */
++#define	IPOPT_TS_PRESPEC	3		/* specified modules only */
++
++#ifdef PLATFORM_LINUX
++
++struct ip_options {
++  __u32		faddr;				/* Saved first hop address */
++  unsigned char	optlen;
++  unsigned char srr;
++  unsigned char rr;
++  unsigned char ts;
++  unsigned char is_setbyuser:1,			/* Set by setsockopt?			*/
++                is_data:1,			/* Options in __data, rather than skb	*/
++                is_strictroute:1,		/* Strict source route			*/
++                srr_is_hit:1,			/* Packet destination addr was our one	*/
++                is_changed:1,			/* IP checksum more not valid		*/	
++                rr_needaddr:1,			/* Need to record addr of outgoing dev	*/
++                ts_needtime:1,			/* Need to record timestamp		*/
++                ts_needaddr:1;			/* Need to record addr of outgoing dev  */
++  unsigned char router_alert;
++  unsigned char __pad1;
++  unsigned char __pad2;
++  unsigned char __data[0];
++};
++
++#define optlength(opt) (sizeof(struct ip_options) + opt->optlen)
++#endif
++
++struct iphdr {
++#if defined(__LITTLE_ENDIAN_BITFIELD)
++	__u8	ihl:4,
++		version:4;
++#elif defined (__BIG_ENDIAN_BITFIELD)
++	__u8	version:4,
++  		ihl:4;
++#else
++#error	"Please fix <asm/byteorder.h>"
++#endif
++	__u8	tos;
++	__u16	tot_len;
++	__u16	id;
++	__u16	frag_off;
++	__u8	ttl;
++	__u8	protocol;
++	__u16	check;
++	__u32	saddr;
++	__u32	daddr;
++	/*The options start here. */
++};
++
++#endif	/* _LINUX_IP_H */
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/linux/wireless.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/linux/wireless.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/linux/wireless.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/linux/wireless.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,90 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++
++#ifndef _LINUX_WIRELESS_H
++#define _LINUX_WIRELESS_H
++
++/***************************** INCLUDES *****************************/
++
++#if 0
++#include <linux/types.h>		/* for __u* and __s* typedefs */
++#include <linux/socket.h>		/* for "struct sockaddr" et al	*/
++#include <linux/if.h>			/* for IFNAMSIZ and co... */
++#else
++#define __user
++//typedef uint16_t	__u16;
++#include <sys/socket.h>			/* for "struct sockaddr" et al	*/
++#include <net/if.h>			/* for IFNAMSIZ and co... */
++#endif
++
++/****************************** TYPES ******************************/
++
++/* --------------------------- SUBTYPES --------------------------- */
++/*
++ *	For all data larger than 16 octets, we need to use a
++ *	pointer to memory allocated in user space.
++ */
++struct	iw_point
++{
++  void __user	*pointer;	/* Pointer to the data  (in user space) */
++  __u16		length;		/* number of fields or size in bytes */
++  __u16		flags;		/* Optional params */
++};
++
++
++/* ------------------------ IOCTL REQUEST ------------------------ */
++/*
++ * This structure defines the payload of an ioctl, and is used 
++ * below.
++ *
++ * Note that this structure should fit on the memory footprint
++ * of iwreq (which is the same as ifreq), which mean a max size of
++ * 16 octets = 128 bits. Warning, pointers might be 64 bits wide...
++ * You should check this when increasing the structures defined
++ * above in this file...
++ */
++union	iwreq_data
++{
++	/* Config - generic */
++	char		name[IFNAMSIZ];
++	/* Name : used to verify the presence of  wireless extensions.
++	 * Name of the protocol/provider... */
++
++	struct iw_point	data;		/* Other large parameters */
++};
++
++/*
++ * The structure to exchange data for ioctl.
++ * This structure is the same as 'struct ifreq', but (re)defined for
++ * convenience...
++ * Do I need to remind you about structure size (32 octets) ?
++ */
++struct	iwreq 
++{
++	union
++	{
++		char	ifrn_name[IFNAMSIZ];	/* if name, e.g. "eth0" */
++	} ifr_ifrn;
++
++	/* Data part (defined just above) */
++	union	iwreq_data	u;
++};
++
++#endif	/* _LINUX_WIRELESS_H */
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/mlme_osdep.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/mlme_osdep.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/mlme_osdep.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/mlme_osdep.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,40 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef	__MLME_OSDEP_H_
++#define __MLME_OSDEP_H_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++
++#if defined(PLATFORM_WINDOWS) || defined(PLATFORM_MPIXEL)
++extern int time_after(u32 now, u32 old);
++#endif
++
++extern void rtw_init_mlme_timer(_adapter *padapter);
++extern void rtw_os_indicate_disconnect( _adapter *adapter );
++extern void rtw_os_indicate_connect( _adapter *adapter );
++void rtw_os_indicate_scan_done( _adapter *padapter, bool aborted);
++extern void rtw_report_sec_ie(_adapter *adapter,u8 authmode,u8 *sec_ie);
++
++void rtw_reset_securitypriv( _adapter *adapter );
++
++#endif	//_MLME_OSDEP_H_
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/mp_custom_oid.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/mp_custom_oid.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/mp_custom_oid.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/mp_custom_oid.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,353 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef	__CUSTOM_OID_H
++#define __CUSTOM_OID_H
++
++// by Owen
++// 0xFF818000 - 0xFF81802F		RTL8180 Mass Production Kit
++// 0xFF818500 - 0xFF81850F		RTL8185 Setup Utility
++// 0xFF818580 - 0xFF81858F		RTL8185 Phy Status Utility
++
++//
++
++// by Owen for Production Kit
++// For Production Kit with Agilent Equipments
++// in order to make our custom oids hopefully somewhat unique
++// we will use 0xFF (indicating implementation specific OID)
++//               81(first byte of non zero Realtek unique identifier)
++//               80 (second byte of non zero Realtek unique identifier)
++//               XX (the custom OID number - providing 255 possible custom oids)
++
++#define OID_RT_PRO_RESET_DUT				0xFF818000
++#define OID_RT_PRO_SET_DATA_RATE			0xFF818001
++#define OID_RT_PRO_START_TEST				0xFF818002
++#define OID_RT_PRO_STOP_TEST    			0xFF818003
++#define OID_RT_PRO_SET_PREAMBLE				0xFF818004
++#define OID_RT_PRO_SET_SCRAMBLER			0xFF818005
++#define OID_RT_PRO_SET_FILTER_BB			0xFF818006
++#define OID_RT_PRO_SET_MANUAL_DIVERSITY_BB		0xFF818007
++#define OID_RT_PRO_SET_CHANNEL_DIRECT_CALL		0xFF818008
++#define OID_RT_PRO_SET_SLEEP_MODE_DIRECT_CALL		0xFF818009
++#define OID_RT_PRO_SET_WAKE_MODE_DIRECT_CALL		0xFF81800A
++
++#define OID_RT_PRO_SET_TX_ANTENNA_BB			0xFF81800D
++#define OID_RT_PRO_SET_ANTENNA_BB			0xFF81800E
++#define OID_RT_PRO_SET_CR_SCRAMBLER			0xFF81800F
++#define OID_RT_PRO_SET_CR_NEW_FILTER			0xFF818010
++#define OID_RT_PRO_SET_TX_POWER_CONTROL			0xFF818011
++#define OID_RT_PRO_SET_CR_TX_CONFIG			0xFF818012
++#define OID_RT_PRO_GET_TX_POWER_CONTROL			0xFF818013
++#define OID_RT_PRO_GET_CR_SIGNAL_QUALITY		0xFF818014
++#define OID_RT_PRO_SET_CR_SETPOINT			0xFF818015
++#define OID_RT_PRO_SET_INTEGRATOR			0xFF818016
++#define OID_RT_PRO_SET_SIGNAL_QUALITY			0xFF818017
++#define OID_RT_PRO_GET_INTEGRATOR			0xFF818018
++#define OID_RT_PRO_GET_SIGNAL_QUALITY			0xFF818019
++#define OID_RT_PRO_QUERY_EEPROM_TYPE			0xFF81801A
++#define OID_RT_PRO_WRITE_MAC_ADDRESS			0xFF81801B
++#define OID_RT_PRO_READ_MAC_ADDRESS			0xFF81801C
++#define OID_RT_PRO_WRITE_CIS_DATA			0xFF81801D
++#define OID_RT_PRO_READ_CIS_DATA			0xFF81801E
++#define OID_RT_PRO_WRITE_POWER_CONTROL			0xFF81801F
++#define OID_RT_PRO_READ_POWER_CONTROL			0xFF818020
++#define OID_RT_PRO_WRITE_EEPROM				0xFF818021
++#define OID_RT_PRO_READ_EEPROM				0xFF818022
++#define OID_RT_PRO_RESET_TX_PACKET_SENT			0xFF818023
++#define OID_RT_PRO_QUERY_TX_PACKET_SENT			0xFF818024
++#define OID_RT_PRO_RESET_RX_PACKET_RECEIVED		0xFF818025 
++#define OID_RT_PRO_QUERY_RX_PACKET_RECEIVED		0xFF818026
++#define OID_RT_PRO_QUERY_RX_PACKET_CRC32_ERROR		0xFF818027
++#define OID_RT_PRO_QUERY_CURRENT_ADDRESS		0xFF818028
++#define OID_RT_PRO_QUERY_PERMANENT_ADDRESS		0xFF818029
++#define OID_RT_PRO_SET_PHILIPS_RF_PARAMETERS		0xFF81802A
++#define OID_RT_PRO_RECEIVE_PACKET			0xFF81802C
++// added by Owen on 04/08/03 for Cameo's request
++#define OID_RT_PRO_WRITE_EEPROM_BYTE			0xFF81802D
++#define OID_RT_PRO_READ_EEPROM_BYTE			0xFF81802E
++#define OID_RT_PRO_SET_MODULATION			0xFF81802F
++//
++
++//Sean		
++#define OID_RT_DRIVER_OPTION				0xFF818080
++#define OID_RT_RF_OFF					0xFF818081
++#define OID_RT_AUTH_STATUS				0xFF818082
++
++//========================================================================
++#define OID_RT_PRO_SET_CONTINUOUS_TX			0xFF81800B
++#define OID_RT_PRO_SET_SINGLE_CARRIER_TX		0xFF81800C
++#define OID_RT_PRO_SET_CARRIER_SUPPRESSION_TX		0xFF81802B
++#define OID_RT_PRO_SET_SINGLE_TONE_TX			0xFF818043
++//========================================================================
++
++
++// by Owen for RTL8185 Phy Status Report Utility
++#define OID_RT_UTILITY_FALSE_ALARM_COUNTERS				0xFF818580
++#define OID_RT_UTILITY_SELECT_DEBUG_MODE				0xFF818581
++#define OID_RT_UTILITY_SELECT_SUBCARRIER_NUMBER				0xFF818582
++#define OID_RT_UTILITY_GET_RSSI_STATUS					0xFF818583
++#define OID_RT_UTILITY_GET_FRAME_DETECTION_STATUS			0xFF818584
++#define OID_RT_UTILITY_GET_AGC_AND_FREQUENCY_OFFSET_ESTIMATION_STATUS	0xFF818585
++#define OID_RT_UTILITY_GET_CHANNEL_ESTIMATION_STATUS			0xFF818586
++//
++
++// by Owen on 03/09/19-03/09/22 for RTL8185
++#define OID_RT_WIRELESS_MODE				0xFF818500
++#define OID_RT_SUPPORTED_RATES				0xFF818501
++#define OID_RT_DESIRED_RATES				0xFF818502
++#define OID_RT_WIRELESS_MODE_STARTING_ADHOC		0xFF818503
++//
++
++#define OID_RT_GET_CONNECT_STATE                	0xFF030001
++#define OID_RT_RESCAN	                        	0xFF030002
++#define OID_RT_SET_KEY_LENGTH				0xFF030003
++#define OID_RT_SET_DEFAULT_KEY_ID			0xFF030004
++
++#define OID_RT_SET_CHANNEL				0xFF010182
++#define OID_RT_SET_SNIFFER_MODE                 	0xFF010183
++#define OID_RT_GET_SIGNAL_QUALITY               	0xFF010184
++#define OID_RT_GET_SMALL_PACKET_CRC			0xFF010185		
++#define OID_RT_GET_MIDDLE_PACKET_CRC			0xFF010186
++#define OID_RT_GET_LARGE_PACKET_CRC			0xFF010187
++#define OID_RT_GET_TX_RETRY				0xFF010188
++#define OID_RT_GET_RX_RETRY				0xFF010189
++#define OID_RT_PRO_SET_FW_DIG_STATE			0xFF01018A//S
++#define OID_RT_PRO_SET_FW_RA_STATE			0xFF01018B//S
++
++#define OID_RT_GET_RX_TOTAL_PACKET			0xFF010190
++#define OID_RT_GET_TX_BEACON_OK				0xFF010191
++#define OID_RT_GET_TX_BEACON_ERR			0xFF010192
++#define OID_RT_GET_RX_ICV_ERR				0xFF010193
++#define OID_RT_SET_ENCRYPTION_ALGORITHM			0xFF010194
++#define OID_RT_SET_NO_AUTO_RESCAN			0xFF010195
++#define OID_RT_GET_PREAMBLE_MODE			0xFF010196
++#define OID_RT_GET_DRIVER_UP_DELTA_TIME			0xFF010197
++#define OID_RT_GET_AP_IP				0xFF010198
++#define OID_RT_GET_CHANNELPLAN				0xFF010199
++#define OID_RT_SET_PREAMBLE_MODE			0xFF01019A
++#define OID_RT_SET_BCN_INTVL				0xFF01019B
++#define OID_RT_GET_RF_VENDER				0xFF01019C
++#define OID_RT_DEDICATE_PROBE				0xFF01019D
++#define OID_RT_PRO_RX_FILTER_PATTERN			0xFF01019E
++
++#define OID_RT_GET_DCST_CURRENT_THRESHOLD		0xFF01019F
++
++#define OID_RT_GET_CCA_ERR				0xFF0101A0
++#define OID_RT_GET_CCA_UPGRADE_THRESHOLD		0xFF0101A1
++#define OID_RT_GET_CCA_FALLBACK_THRESHOLD		0xFF0101A2
++
++#define OID_RT_GET_CCA_UPGRADE_EVALUATE_TIMES		0xFF0101A3
++#define OID_RT_GET_CCA_FALLBACK_EVALUATE_TIMES		0xFF0101A4
++
++// by Owen on 03/31/03 for Cameo's request
++#define OID_RT_SET_RATE_ADAPTIVE			0xFF0101A5
++//
++#define OID_RT_GET_DCST_EVALUATE_PERIOD			0xFF0101A5
++#define OID_RT_GET_DCST_TIME_UNIT_INDEX			0xFF0101A6
++#define OID_RT_GET_TOTAL_TX_BYTES			0xFF0101A7
++#define OID_RT_GET_TOTAL_RX_BYTES			0xFF0101A8
++#define OID_RT_CURRENT_TX_POWER_LEVEL			0xFF0101A9
++#define OID_RT_GET_ENC_KEY_MISMATCH_COUNT		0xFF0101AA
++#define OID_RT_GET_ENC_KEY_MATCH_COUNT			0xFF0101AB
++#define OID_RT_GET_CHANNEL				0xFF0101AC
++
++#define OID_RT_SET_CHANNELPLAN				0xFF0101AD
++#define OID_RT_GET_HARDWARE_RADIO_OFF			0xFF0101AE
++#define OID_RT_CHANNELPLAN_BY_COUNTRY			0xFF0101AF
++#define OID_RT_SCAN_AVAILABLE_BSSID			0xFF0101B0
++#define OID_RT_GET_HARDWARE_VERSION			0xFF0101B1
++#define OID_RT_GET_IS_ROAMING				0xFF0101B2
++#define OID_RT_GET_IS_PRIVACY				0xFF0101B3
++#define OID_RT_GET_KEY_MISMATCH				0xFF0101B4
++#define OID_RT_SET_RSSI_ROAM_TRAFFIC_TH			0xFF0101B5
++#define OID_RT_SET_RSSI_ROAM_SIGNAL_TH			0xFF0101B6
++#define OID_RT_RESET_LOG				0xFF0101B7
++#define OID_RT_GET_LOG					0xFF0101B8
++#define OID_RT_SET_INDICATE_HIDDEN_AP			0xFF0101B9
++#define OID_RT_GET_HEADER_FAIL				0xFF0101BA
++#define OID_RT_SUPPORTED_WIRELESS_MODE			0xFF0101BB
++#define OID_RT_GET_CHANNEL_LIST				0xFF0101BC
++#define OID_RT_GET_SCAN_IN_PROGRESS			0xFF0101BD
++#define OID_RT_GET_TX_INFO				0xFF0101BE
++#define OID_RT_RF_READ_WRITE_OFFSET			0xFF0101BF
++#define OID_RT_RF_READ_WRITE				0xFF0101C0
++
++// For Netgear request. 2005.01.13, by rcnjko.
++#define OID_RT_FORCED_DATA_RATE				0xFF0101C1
++#define OID_RT_WIRELESS_MODE_FOR_SCAN_LIST		0xFF0101C2
++// For Netgear request. 2005.02.17, by rcnjko.
++#define OID_RT_GET_BSS_WIRELESS_MODE			0xFF0101C3
++// For AZ project. 2005.06.27, by rcnjko.
++#define OID_RT_SCAN_WITH_MAGIC_PACKET			0xFF0101C4
++
++// Vincent 8185MP
++#define OID_RT_PRO_RX_FILTER				0xFF0111C0
++
++//Andy TEST
++//#define OID_RT_PRO_WRITE_REGISTRY			0xFF0111C1
++//#define OID_RT_PRO_READ_REGISTRY			0xFF0111C2
++#define OID_CE_USB_WRITE_REGISTRY			0xFF0111C1
++#define OID_CE_USB_READ_REGISTRY			0xFF0111C2
++
++
++#define OID_RT_PRO_SET_INITIAL_GAIN			0xFF0111C3
++#define OID_RT_PRO_SET_BB_RF_STANDBY_MODE		0xFF0111C4
++#define OID_RT_PRO_SET_BB_RF_SHUTDOWN_MODE		0xFF0111C5
++#define OID_RT_PRO_SET_TX_CHARGE_PUMP			0xFF0111C6
++#define OID_RT_PRO_SET_RX_CHARGE_PUMP			0xFF0111C7
++#define OID_RT_PRO_RF_WRITE_REGISTRY			0xFF0111C8
++#define OID_RT_PRO_RF_READ_REGISTRY			0xFF0111C9
++#define OID_RT_PRO_QUERY_RF_TYPE			0xFF0111CA
++
++// AP OID
++#define OID_RT_AP_GET_ASSOCIATED_STATION_LIST		0xFF010300
++#define OID_RT_AP_GET_CURRENT_TIME_STAMP		0xFF010301
++#define OID_RT_AP_SWITCH_INTO_AP_MODE			0xFF010302
++#define OID_RT_AP_SET_DTIM_PERIOD			0xFF010303
++#define OID_RT_AP_SUPPORTED				0xFF010304	// Determine if driver supports AP mode. 2004.08.27, by rcnjko.
++#define OID_RT_AP_SET_PASSPHRASE			0xFF010305	// Set WPA-PSK passphrase into authenticator. 2005.07.08, byrcnjko.
++
++// 8187MP. 2004.09.06, by rcnjko.
++#define OID_RT_PRO8187_WI_POLL				0xFF818780
++#define OID_RT_PRO_WRITE_BB_REG				0xFF818781
++#define OID_RT_PRO_READ_BB_REG				0xFF818782
++#define OID_RT_PRO_WRITE_RF_REG				0xFF818783
++#define OID_RT_PRO_READ_RF_REG				0xFF818784
++
++// Meeting House. added by Annie, 2005-07-20.
++#define OID_RT_MH_VENDER_ID				0xFFEDC100
++
++//8711 MP OID added 20051230.
++#define OID_RT_PRO8711_JOIN_BSS				0xFF871100//S
++
++#define OID_RT_PRO_READ_REGISTER			0xFF871101 //Q
++#define OID_RT_PRO_WRITE_REGISTER			0xFF871102 //S
++
++#define OID_RT_PRO_BURST_READ_REGISTER			0xFF871103 //Q		
++#define OID_RT_PRO_BURST_WRITE_REGISTER 		0xFF871104 //S
++
++#define OID_RT_PRO_WRITE_TXCMD				0xFF871105 //S
++
++#define OID_RT_PRO_READ16_EEPROM			0xFF871106 //Q
++#define OID_RT_PRO_WRITE16_EEPROM			0xFF871107 //S
++
++#define OID_RT_PRO_H2C_SET_COMMAND			0xFF871108 //S
++#define OID_RT_PRO_H2C_QUERY_RESULT			0xFF871109 //Q
++
++#define OID_RT_PRO8711_WI_POLL				0xFF87110A //Q
++#define OID_RT_PRO8711_PKT_LOSS				0xFF87110B //Q
++#define OID_RT_RD_ATTRIB_MEM				0xFF87110C//Q
++#define OID_RT_WR_ATTRIB_MEM				0xFF87110D//S
++
++
++//Method 2 for H2C/C2H
++#define OID_RT_PRO_H2C_CMD_MODE				0xFF871110 //S
++#define OID_RT_PRO_H2C_CMD_RSP_MODE			0xFF871111 //Q
++#define OID_RT_PRO_H2C_CMD_EVENT_MODE			0xFF871112 //S
++#define OID_RT_PRO_WAIT_C2H_EVENT			0xFF871113 //Q
++#define OID_RT_PRO_RW_ACCESS_PROTOCOL_TEST		0xFF871114//Q
++
++#define OID_RT_PRO_SCSI_ACCESS_TEST			0xFF871115 //Q, S
++
++#define OID_RT_PRO_SCSI_TCPIPOFFLOAD_OUT		0xFF871116 //S
++#define OID_RT_PRO_SCSI_TCPIPOFFLOAD_IN			0xFF871117 //Q,S
++#define OID_RT_RRO_RX_PKT_VIA_IOCTRL			0xFF871118 //Q
++#define OID_RT_RRO_RX_PKTARRAY_VIA_IOCTRL		0xFF871119 //Q
++
++#define OID_RT_RPO_SET_PWRMGT_TEST			0xFF87111A //S
++#define OID_RT_PRO_QRY_PWRMGT_TEST			0XFF87111B //Q
++#define OID_RT_RPO_ASYNC_RWIO_TEST			0xFF87111C //S
++#define OID_RT_RPO_ASYNC_RWIO_POLL			0xFF87111D //Q
++#define OID_RT_PRO_SET_RF_INTFS				0xFF87111E //S
++#define OID_RT_POLL_RX_STATUS				0xFF87111F //Q
++
++#define OID_RT_PRO_CFG_DEBUG_MESSAGE			0xFF871120 //Q,S
++#define OID_RT_PRO_SET_DATA_RATE_EX			0xFF871121//S
++#define OID_RT_PRO_SET_BASIC_RATE			0xFF871122//S
++#define OID_RT_PRO_READ_TSSI				0xFF871123//S
++#define OID_RT_PRO_SET_POWER_TRACKING			0xFF871124//S
++
++ 
++#define OID_RT_PRO_QRY_PWRSTATE				0xFF871150 //Q
++#define OID_RT_PRO_SET_PWRSTATE				0xFF871151 //S 
++
++//Method 2 , using workitem
++#define OID_RT_SET_READ_REG				0xFF871181 //S
++#define OID_RT_SET_WRITE_REG				0xFF871182 //S
++#define OID_RT_SET_BURST_READ_REG			0xFF871183 //S
++#define OID_RT_SET_BURST_WRITE_REG			0xFF871184 //S
++#define OID_RT_SET_WRITE_TXCMD				0xFF871185 //S
++#define OID_RT_SET_READ16_EEPROM			0xFF871186 //S
++#define OID_RT_SET_WRITE16_EEPROM			0xFF871187 //S
++#define OID_RT_QRY_POLL_WKITEM				0xFF871188 //Q
++
++//For SDIO INTERFACE only
++#define OID_RT_PRO_SYNCPAGERW_SRAM			0xFF8711A0 //Q, S
++#define OID_RT_PRO_871X_DRV_EXT 			0xFF8711A1
++
++//For USB INTERFACE only
++#define OID_RT_PRO_USB_VENDOR_REQ			0xFF8711B0 //Q, S
++#define OID_RT_PRO_SCSI_AUTO_TEST			0xFF8711B1 //S
++#define OID_RT_PRO_USB_MAC_AC_FIFO_WRITE		0xFF8711B2 //S
++#define OID_RT_PRO_USB_MAC_RX_FIFO_READ			0xFF8711B3 //Q
++#define OID_RT_PRO_USB_MAC_RX_FIFO_POLLING		0xFF8711B4 //Q
++
++#define OID_RT_PRO_H2C_SET_RATE_TABLE			0xFF8711FB //S
++#define OID_RT_PRO_H2C_GET_RATE_TABLE			0xFF8711FC //S
++#define OID_RT_PRO_H2C_C2H_LBK_TEST			0xFF8711FE
++
++#define OID_RT_PRO_ENCRYPTION_CTRL			0xFF871200 //Q, S
++#define OID_RT_PRO_ADD_STA_INFO				0xFF871201 //S
++#define OID_RT_PRO_DELE_STA_INFO    			0xFF871202 //S
++#define OID_RT_PRO_QUERY_DR_VARIABLE   			0xFF871203 //Q
++
++#define OID_RT_PRO_RX_PACKET_TYPE			0xFF871204 //Q, S
++
++#define OID_RT_PRO_READ_EFUSE				0xFF871205 //Q
++#define OID_RT_PRO_WRITE_EFUSE				0xFF871206 //S
++#define OID_RT_PRO_RW_EFUSE_PGPKT			0xFF871207 //Q, S
++#define OID_RT_GET_EFUSE_CURRENT_SIZE			0xFF871208 //Q
++
++#define OID_RT_SET_BANDWIDTH				0xFF871209 //S
++#define OID_RT_SET_CRYSTAL_CAP				0xFF87120A //S
++
++#define OID_RT_SET_RX_PACKET_TYPE    			0xFF87120B //S
++
++#define OID_RT_GET_EFUSE_MAX_SIZE			0xFF87120C //Q
++
++#define OID_RT_PRO_SET_TX_AGC_OFFSET			0xFF87120D //S
++
++#define OID_RT_PRO_SET_PKT_TEST_MODE			0xFF87120E //S
++
++#define OID_RT_PRO_FOR_EVM_TEST_SETTING			0xFF87120F //S
++
++#define OID_RT_PRO_GET_THERMAL_METER			0xFF871210 //Q
++
++#define OID_RT_RESET_PHY_RX_PACKET_COUNT		0xFF871211 //S
++#define OID_RT_GET_PHY_RX_PACKET_RECEIVED		0xFF871212 //Q
++#define OID_RT_GET_PHY_RX_PACKET_CRC32_ERROR		0xFF871213 //Q
++
++#define OID_RT_SET_POWER_DOWN				0xFF871214 //S
++
++#define OID_RT_GET_POWER_MODE				0xFF871215 //Q
++
++#define OID_RT_PRO_EFUSE				0xFF871216 //Q, S
++#define OID_RT_PRO_EFUSE_MAP				0xFF871217 //Q, S
++
++#endif //#ifndef	__CUSTOM_OID_H
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/nic_spec.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/nic_spec.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/nic_spec.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/nic_spec.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,47 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/	
++
++
++#ifndef __NIC_SPEC_H__
++#define __NIC_SPEC_H__
++
++#include <drv_conf.h>
++
++#define RTL8711_MCTRL_		(0x20000)
++#define RTL8711_UART_		(0x30000)
++#define RTL8711_TIMER_		(0x40000)
++#define RTL8711_FINT_		(0x50000)
++#define RTL8711_HINT_		(0x50000)
++#define RTL8711_GPIO_		(0x60000)
++#define RTL8711_WLANCTRL_	(0x200000)
++#define RTL8711_WLANFF_		(0xe00000)
++#define RTL8711_HCICTRL_	(0x600000)
++#define RTL8711_SYSCFG_		(0x620000)
++#define RTL8711_SYSCTRL_	(0x620000)
++#define RTL8711_MCCTRL_		(0x020000)
++
++
++#include <rtl8711_regdef.h>
++
++#include <rtl8711_bitdef.h>
++
++
++#endif // __RTL8711_SPEC_H__
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/osdep_ce_service.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/osdep_ce_service.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/osdep_ce_service.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/osdep_ce_service.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,171 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++
++#ifndef __OSDEP_CE_SERVICE_H_
++#define __OSDEP_CE_SERVICE_H_
++
++
++#include <ndis.h>
++#include <ntddndis.h>
++
++#ifdef CONFIG_SDIO_HCI
++#include "SDCardDDK.h"
++#endif
++
++#ifdef CONFIG_USB_HCI
++#include <usbdi.h>
++#endif
++
++typedef HANDLE 	_sema;
++typedef	LIST_ENTRY	_list;
++typedef NDIS_STATUS _OS_STATUS;
++
++typedef NDIS_SPIN_LOCK	_lock;
++
++typedef HANDLE 		_rwlock; //Mutex
++
++typedef u32	_irqL;
++
++typedef NDIS_HANDLE  _nic_hdl;
++
++
++typedef NDIS_MINIPORT_TIMER    _timer;
++
++struct	__queue	{
++	LIST_ENTRY	queue;
++	_lock	lock;
++};
++
++typedef	NDIS_PACKET	_pkt;
++typedef NDIS_BUFFER	_buffer;
++typedef struct	__queue	_queue;
++
++typedef HANDLE 	_thread_hdl_;
++typedef DWORD thread_return;
++typedef void*	thread_context;
++typedef NDIS_WORK_ITEM _workitem;
++
++#define thread_exit() ExitThread(STATUS_SUCCESS); return 0;
++
++
++#define SEMA_UPBND	(0x7FFFFFFF)   //8192
++
++__inline static _list *get_prev(_list	*list)
++{
++	return list->Blink;
++}
++	
++__inline static _list *get_next(_list	*list)
++{
++	return list->Flink;
++}
++
++__inline static _list	*get_list_head(_queue	*queue)
++{
++	return (&(queue->queue));
++}
++
++#define LIST_CONTAINOR(ptr, type, member) CONTAINING_RECORD(ptr, type, member)
++
++__inline static void _enter_critical(_lock *plock, _irqL *pirqL)
++{
++	NdisAcquireSpinLock(plock);
++}
++
++__inline static void _exit_critical(_lock *plock, _irqL *pirqL)
++{
++	NdisReleaseSpinLock(plock);
++}
++
++__inline static _enter_critical_ex(_lock *plock, _irqL *pirqL)
++{
++	NdisDprAcquireSpinLock(plock);	
++}
++
++__inline static _exit_critical_ex(_lock *plock, _irqL *pirqL)
++{
++	NdisDprReleaseSpinLock(plock);	
++}
++
++
++__inline static void _enter_hwio_critical(_rwlock *prwlock, _irqL *pirqL)
++{
++	WaitForSingleObject(*prwlock, INFINITE );
++
++}
++
++__inline static void _exit_hwio_critical(_rwlock *prwlock, _irqL *pirqL)
++{
++	ReleaseMutex(*prwlock);
++}
++
++__inline static void rtw_list_delete(_list *plist)
++{
++	RemoveEntryList(plist);
++	InitializeListHead(plist);
++}
++
++__inline static void _init_timer(_timer *ptimer,_nic_hdl nic_hdl,void *pfunc,PVOID cntx)
++{
++	NdisMInitializeTimer(ptimer, nic_hdl, pfunc, cntx);
++}
++
++__inline static void _set_timer(_timer *ptimer,u32 delay_time)
++{
++ 	NdisMSetTimer(ptimer,delay_time);
++}
++
++__inline static void _cancel_timer(_timer *ptimer,u8 *bcancelled)
++{
++	NdisMCancelTimer(ptimer,bcancelled);
++}
++
++__inline static void _init_workitem(_workitem *pwork, void *pfunc, PVOID cntx)
++{
++
++	NdisInitializeWorkItem(pwork, pfunc, cntx);
++}
++
++__inline static void _set_workitem(_workitem *pwork)
++{
++	NdisScheduleWorkItem(pwork);
++}
++
++#define ATOMIC_INIT(i)  { (i) }
++
++//
++// Global Mutex: can only be used at PASSIVE level.
++//
++
++#define ACQUIRE_GLOBAL_MUTEX(_MutexCounter)                              \
++{                                                               \
++    while (NdisInterlockedIncrement((PULONG)&(_MutexCounter)) != 1)\
++    {                                                           \
++        NdisInterlockedDecrement((PULONG)&(_MutexCounter));        \
++        NdisMSleep(10000);                          \
++    }                                                           \
++}
++
++#define RELEASE_GLOBAL_MUTEX(_MutexCounter)                              \
++{                                                               \
++    NdisInterlockedDecrement((PULONG)&(_MutexCounter));              \
++}
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/osdep_intf.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/osdep_intf.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/osdep_intf.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/osdep_intf.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,155 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++
++#ifndef __OSDEP_INTF_H_
++#define __OSDEP_INTF_H_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++
++struct intf_priv {
++
++	u8 *intf_dev;
++	u32	max_iosz; 	//USB2.0: 128, USB1.1: 64, SDIO:64
++	u32	max_xmitsz; //USB2.0: unlimited, SDIO:512
++	u32	max_recvsz; //USB2.0: unlimited, SDIO:512
++
++	volatile u8 *io_rwmem;
++	volatile u8 *allocated_io_rwmem;
++	u32	io_wsz; //unit: 4bytes
++	u32	io_rsz;//unit: 4bytes
++	u8 intf_status;
++
++	void (*_bus_io)(u8 *priv);
++
++/*
++Under Sync. IRP (SDIO/USB)
++A protection mechanism is necessary for the io_rwmem(read/write protocol)
++
++Under Async. IRP (SDIO/USB)
++The protection mechanism is through the pending queue.
++*/
++
++	_mutex ioctl_mutex;
++
++
++#ifdef PLATFORM_LINUX
++	#ifdef CONFIG_USB_HCI
++	// when in USB, IO is through interrupt in/out endpoints
++	struct usb_device 	*udev;
++	PURB	piorw_urb;
++	u8 io_irp_cnt;
++	u8 bio_irp_pending;
++	_sema io_retevt;
++	_timer	io_timer;
++	u8 bio_irp_timeout;
++	u8 bio_timer_cancel;
++	#endif
++#endif
++
++#ifdef PLATFORM_OS_XP
++	#ifdef CONFIG_SDIO_HCI
++		// below is for io_rwmem...
++		PMDL pmdl;
++		PSDBUS_REQUEST_PACKET  sdrp;
++		PSDBUS_REQUEST_PACKET  recv_sdrp;
++		PSDBUS_REQUEST_PACKET  xmit_sdrp;
++
++			PIRP		piorw_irp;
++
++	#endif
++	#ifdef CONFIG_USB_HCI
++		PURB	piorw_urb;
++		PIRP		piorw_irp;
++		u8 io_irp_cnt;
++		u8 bio_irp_pending;
++		_sema io_retevt;
++	#endif
++#endif
++
++};
++
++
++#ifdef CONFIG_R871X_TEST
++int rtw_start_pseudo_adhoc(_adapter *padapter);
++int rtw_stop_pseudo_adhoc(_adapter *padapter);
++#endif
++
++struct dvobj_priv *devobj_init(void);
++void devobj_deinit(struct dvobj_priv *pdvobj);
++
++u8 rtw_init_drv_sw(_adapter *padapter);
++u8 rtw_free_drv_sw(_adapter *padapter);
++u8 rtw_reset_drv_sw(_adapter *padapter);
++
++u32 rtw_start_drv_threads(_adapter *padapter);
++void rtw_stop_drv_threads (_adapter *padapter);
++void rtw_cancel_all_timer(_adapter *padapter);
++
++#ifdef PLATFORM_LINUX
++int rtw_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
++
++int rtw_init_netdev_name(struct net_device *pnetdev, const char *ifname);
++struct net_device *rtw_init_netdev(_adapter *padapter);
++void rtw_unregister_netdevs(struct dvobj_priv *dvobj);
++
++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35))
++u16 rtw_recv_select_queue(struct sk_buff *skb);
++#endif //LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35)
++
++#ifdef CONFIG_PROC_DEBUG
++void rtw_proc_init_one(struct net_device *dev);
++void rtw_proc_remove_one(struct net_device *dev);
++#else //!CONFIG_PROC_DEBUG
++static void rtw_proc_init_one(struct net_device *dev){}
++static void rtw_proc_remove_one(struct net_device *dev){}
++#endif //!CONFIG_PROC_DEBUG
++#endif //PLATFORM_LINUX
++
++
++#ifdef PLATFORM_FREEBSD
++extern int rtw_ioctl(struct ifnet * ifp, u_long cmd, caddr_t data);
++#endif
++
++void rtw_ips_dev_unload(_adapter *padapter);
++#ifdef CONFIG_IPS
++int rtw_ips_pwr_up(_adapter *padapter);
++void rtw_ips_pwr_down(_adapter *padapter);
++#endif
++
++#ifdef CONFIG_CONCURRENT_MODE
++struct _io_ops;
++_adapter *rtw_drv_if2_init(_adapter *primary_padapter, void (*set_intf_ops)(struct _io_ops *pops));
++void rtw_drv_if2_free(_adapter *if2);
++void rtw_drv_if2_stop(_adapter *if2);
++#ifdef CONFIG_MULTI_VIR_IFACES
++struct dvobj_priv;
++_adapter *rtw_drv_add_vir_if(_adapter *primary_padapter, void (*set_intf_ops)(struct _io_ops *pops));
++void rtw_drv_stop_vir_ifaces(struct dvobj_priv *dvobj);
++void rtw_drv_free_vir_ifaces(struct dvobj_priv *dvobj);
++#endif //CONFIG_MULTI_VIR_IFACES
++#endif
++
++int rtw_drv_register_netdev(_adapter *padapter);
++void rtw_ndev_destructor(_nic_hdl ndev);
++
++#endif	//_OSDEP_INTF_H_
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/osdep_service.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/osdep_service.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/osdep_service.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/osdep_service.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,1815 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __OSDEP_SERVICE_H_
++#define __OSDEP_SERVICE_H_
++
++#include <drv_conf.h>
++#include <basic_types.h>
++//#include <rtl871x_byteorder.h>
++
++#define _FAIL		0
++#define _SUCCESS	1
++#define RTW_RX_HANDLED 2
++//#define RTW_STATUS_TIMEDOUT -110
++
++#undef _TRUE
++#define _TRUE		1
++
++#undef _FALSE
++#define _FALSE		0
++	
++
++#ifdef PLATFORM_FREEBSD
++#include <sys/cdefs.h>
++#include <sys/types.h>
++#include <sys/systm.h>
++#include <sys/param.h>
++#include <sys/sockio.h>
++#include <sys/sysctl.h>
++#include <sys/lock.h>
++#include <sys/mutex.h>
++#include <sys/mbuf.h>
++#include <sys/kernel.h>
++#include <sys/socket.h>
++#include <sys/systm.h>
++#include <sys/malloc.h>
++#include <sys/module.h>
++#include <sys/bus.h>
++#include <sys/endian.h>
++#include <sys/kdb.h>
++#include <sys/kthread.h>
++#include <machine/atomic.h>
++
++#include <machine/bus.h>
++#include <machine/resource.h>
++#include <sys/rman.h>
++
++#include <net/bpf.h>
++#include <net/if.h>
++#include <net/if_arp.h>
++#include <net/ethernet.h>
++#include <net/if_dl.h>
++#include <net/if_media.h>
++#include <net/if_types.h>
++#include <net/route.h>
++
++
++#include <netinet/in.h>
++#include <netinet/in_systm.h>
++#include <netinet/in_var.h>
++#include <netinet/if_ether.h>
++
++#include <net80211/ieee80211_var.h>
++#include <net80211/ieee80211_regdomain.h>
++#include <net80211/ieee80211_radiotap.h>
++#include <net80211/ieee80211_ratectl.h>
++
++#include <dev/usb/usb.h>
++#include <dev/usb/usbdi.h>
++#include "usbdevs.h"
++
++#define	USB_DEBUG_VAR rum_debug
++#include <dev/usb/usb_debug.h>
++
++#if 1 //Baron porting from linux, it's all temp solution, needs to check again
++#include <sys/sema.h>
++#include <sys/pcpu.h> /* XXX for PCPU_GET */
++//	typedef struct 	semaphore _sema;
++	typedef struct 	sema _sema;
++//	typedef	spinlock_t	_lock;
++	typedef	struct mtx	_lock;
++	typedef struct mtx 		_mutex;
++	typedef struct timer_list _timer;
++	struct list_head {
++	struct list_head *next, *prev;
++	};
++	struct	__queue	{
++		struct	list_head	queue;	
++		_lock	lock;
++	};
++
++	//typedef	struct sk_buff	_pkt;
++	typedef	struct mbuf	_pkt;
++	typedef struct mbuf	_buffer;
++	
++	typedef struct	__queue	_queue;
++	typedef struct	list_head	_list;
++	typedef	int	_OS_STATUS;
++	//typedef u32	_irqL;
++	typedef unsigned long _irqL;
++	typedef	struct	ifnet * _nic_hdl;
++	
++	typedef pid_t		_thread_hdl_;
++//	typedef struct thread		_thread_hdl_;
++	typedef void		thread_return;
++	typedef void*	thread_context;
++
++	//#define thread_exit() complete_and_exit(NULL, 0)
++
++	typedef void timer_hdl_return;
++	typedef void* timer_hdl_context;
++	typedef struct work_struct _workitem;
++
++#define   KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))
++/* emulate a modern version */
++#define LINUX_VERSION_CODE KERNEL_VERSION(2, 6, 35)
++
++#define WIRELESS_EXT -1
++#define HZ hz
++#define spin_lock_irqsave mtx_lock_irqsave
++#define spin_lock_bh mtx_lock_irqsave
++#define mtx_lock_irqsave(lock, x) mtx_lock(lock)//{local_irq_save((x)); mtx_lock_spin((lock));}
++//#define IFT_RTW	0xf9 //ifnet allocate type for RTW
++#define free_netdev if_free
++#define LIST_CONTAINOR(ptr, type, member) \
++        ((type *)((char *)(ptr)-(SIZE_T)(&((type *)0)->member)))
++#define container_of(p,t,n) (t*)((p)-&(((t*)0)->n))
++/* 
++ * Linux timers are emulated using FreeBSD callout functions
++ * (and taskqueue functionality).
++ *
++ * Currently no timer stats functionality.
++ *
++ * See (linux_compat) processes.c
++ *
++ */
++struct timer_list {
++
++        /* FreeBSD callout related fields */
++        struct callout callout;
++
++ 	//timeout function
++        void (*function)(void*);
++	//argument
++	 void *arg;
++        
++};
++struct workqueue_struct;
++struct work_struct;
++typedef void (*work_func_t)(struct work_struct *work);
++/* Values for the state of an item of work (work_struct) */
++typedef enum work_state {
++        WORK_STATE_UNSET = 0,
++        WORK_STATE_CALLOUT_PENDING = 1,
++        WORK_STATE_TASK_PENDING = 2,
++        WORK_STATE_WORK_CANCELLED = 3        
++} work_state_t;
++
++struct work_struct {
++        struct task task; /* FreeBSD task */
++        work_state_t state; /* the pending or otherwise state of work. */
++        work_func_t func;       
++};
++#define spin_unlock_irqrestore mtx_unlock_irqrestore
++#define spin_unlock_bh mtx_unlock_irqrestore
++#define mtx_unlock_irqrestore(lock,x)    mtx_unlock(lock);
++extern void	_rtw_spinlock_init(_lock *plock);
++
++//modify private structure to match freebsd
++#define BITS_PER_LONG 32
++union ktime {
++	s64	tv64;
++#if BITS_PER_LONG != 64 && !defined(CONFIG_KTIME_SCALAR)
++	struct {
++#ifdef __BIG_ENDIAN
++	s32	sec, nsec;
++#else
++	s32	nsec, sec;
++#endif
++	} tv;
++#endif
++};
++#define kmemcheck_bitfield_begin(name)
++#define kmemcheck_bitfield_end(name)
++#define CHECKSUM_NONE 0
++typedef unsigned char *sk_buff_data_t;
++typedef union ktime ktime_t;		/* Kill this */
++
++void rtw_mtx_lock(_lock *plock);
++	
++void rtw_mtx_unlock(_lock *plock);
++
++/** 
++ *	struct sk_buff - socket buffer
++ *	@next: Next buffer in list
++ *	@prev: Previous buffer in list
++ *	@sk: Socket we are owned by
++ *	@tstamp: Time we arrived
++ *	@dev: Device we arrived on/are leaving by
++ *	@transport_header: Transport layer header
++ *	@network_header: Network layer header
++ *	@mac_header: Link layer header
++ *	@_skb_refdst: destination entry (with norefcount bit)
++ *	@sp: the security path, used for xfrm
++ *	@cb: Control buffer. Free for use by every layer. Put private vars here
++ *	@len: Length of actual data
++ *	@data_len: Data length
++ *	@mac_len: Length of link layer header
++ *	@hdr_len: writable header length of cloned skb
++ *	@csum: Checksum (must include start/offset pair)
++ *	@csum_start: Offset from skb->head where checksumming should start
++ *	@csum_offset: Offset from csum_start where checksum should be stored
++ *	@local_df: allow local fragmentation
++ *	@cloned: Head may be cloned (check refcnt to be sure)
++ *	@nohdr: Payload reference only, must not modify header
++ *	@pkt_type: Packet class
++ *	@fclone: skbuff clone status
++ *	@ip_summed: Driver fed us an IP checksum
++ *	@priority: Packet queueing priority
++ *	@users: User count - see {datagram,tcp}.c
++ *	@protocol: Packet protocol from driver
++ *	@truesize: Buffer size 
++ *	@head: Head of buffer
++ *	@data: Data head pointer
++ *	@tail: Tail pointer
++ *	@end: End pointer
++ *	@destructor: Destruct function
++ *	@mark: Generic packet mark
++ *	@nfct: Associated connection, if any
++ *	@ipvs_property: skbuff is owned by ipvs
++ *	@peeked: this packet has been seen already, so stats have been
++ *		done for it, don't do them again
++ *	@nf_trace: netfilter packet trace flag
++ *	@nfctinfo: Relationship of this skb to the connection
++ *	@nfct_reasm: netfilter conntrack re-assembly pointer
++ *	@nf_bridge: Saved data about a bridged frame - see br_netfilter.c
++ *	@skb_iif: ifindex of device we arrived on
++ *	@rxhash: the packet hash computed on receive
++ *	@queue_mapping: Queue mapping for multiqueue devices
++ *	@tc_index: Traffic control index
++ *	@tc_verd: traffic control verdict
++ *	@ndisc_nodetype: router type (from link layer)
++ *	@dma_cookie: a cookie to one of several possible DMA operations
++ *		done by skb DMA functions
++ *	@secmark: security marking
++ *	@vlan_tci: vlan tag control information
++ */
++
++struct sk_buff {
++	/* These two members must be first. */
++	struct sk_buff		*next;
++	struct sk_buff		*prev;
++
++	ktime_t			tstamp;
++
++	struct sock		*sk;
++	//struct net_device	*dev;
++	struct ifnet *dev;
++
++	/*
++	 * This is the control buffer. It is free to use for every
++	 * layer. Please put your private variables there. If you
++	 * want to keep them across layers you have to do a skb_clone()
++	 * first. This is owned by whoever has the skb queued ATM.
++	 */
++	char			cb[48] __aligned(8);
++
++	unsigned long		_skb_refdst;
++#ifdef CONFIG_XFRM
++	struct	sec_path	*sp;
++#endif
++	unsigned int		len,
++				data_len;
++	u16			mac_len,
++				hdr_len;
++	union {
++		u32		csum;
++		struct {
++			u16	csum_start;
++			u16	csum_offset;
++		}smbol2;
++	}smbol1;
++	u32			priority;
++	kmemcheck_bitfield_begin(flags1);
++	u8			local_df:1,
++				cloned:1,
++				ip_summed:2,
++				nohdr:1,
++				nfctinfo:3;
++	u8			pkt_type:3,
++				fclone:2,
++				ipvs_property:1,
++				peeked:1,
++				nf_trace:1;
++	kmemcheck_bitfield_end(flags1);
++	u16			protocol;
++
++	void			(*destructor)(struct sk_buff *skb);
++#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
++	struct nf_conntrack	*nfct;
++	struct sk_buff		*nfct_reasm;
++#endif
++#ifdef CONFIG_BRIDGE_NETFILTER
++	struct nf_bridge_info	*nf_bridge;
++#endif
++
++	int			skb_iif;
++#ifdef CONFIG_NET_SCHED
++	u16			tc_index;	/* traffic control index */
++#ifdef CONFIG_NET_CLS_ACT
++	u16			tc_verd;	/* traffic control verdict */
++#endif
++#endif
++
++	u32			rxhash;
++
++	kmemcheck_bitfield_begin(flags2);
++	u16			queue_mapping:16;
++#ifdef CONFIG_IPV6_NDISC_NODETYPE
++	u8			ndisc_nodetype:2,
++				deliver_no_wcard:1;
++#else
++	u8			deliver_no_wcard:1;
++#endif
++	kmemcheck_bitfield_end(flags2);
++
++	/* 0/14 bit hole */
++
++#ifdef CONFIG_NET_DMA
++	dma_cookie_t		dma_cookie;
++#endif
++#ifdef CONFIG_NETWORK_SECMARK
++	u32			secmark;
++#endif
++	union {
++		u32		mark;
++		u32		dropcount;
++	}symbol3;
++
++	u16			vlan_tci;
++
++	sk_buff_data_t		transport_header;
++	sk_buff_data_t		network_header;
++	sk_buff_data_t		mac_header;
++	/* These elements must be at the end, see alloc_skb() for details.  */
++	sk_buff_data_t		tail;
++	sk_buff_data_t		end;
++	unsigned char		*head,
++				*data;
++	unsigned int		truesize;
++	atomic_t		users;
++};
++struct sk_buff_head {
++	/* These two members must be first. */
++	struct sk_buff	*next;
++	struct sk_buff	*prev;
++
++	u32		qlen;
++	_lock	lock;
++};
++#define skb_tail_pointer(skb)	skb->tail
++static inline unsigned char *skb_put(struct sk_buff *skb, unsigned int len)
++{
++	unsigned char *tmp = skb_tail_pointer(skb);
++	//SKB_LINEAR_ASSERT(skb);
++	skb->tail += len;
++	skb->len  += len;
++	return tmp;
++}
++
++static inline unsigned char *__skb_pull(struct sk_buff *skb, unsigned int len)
++{
++	skb->len -= len;
++	if(skb->len < skb->data_len)
++		printf("%s(),%d,error!\n",__FUNCTION__,__LINE__);
++	return skb->data += len;
++}
++static inline unsigned char *skb_pull(struct sk_buff *skb, unsigned int len)
++{
++	#ifdef PLATFORM_FREEBSD
++	return __skb_pull(skb, len);
++	#else
++	return unlikely(len > skb->len) ? NULL : __skb_pull(skb, len);
++	#endif //PLATFORM_FREEBSD
++}
++static inline u32 skb_queue_len(const struct sk_buff_head *list_)
++{
++	return list_->qlen;
++}
++static inline void __skb_insert(struct sk_buff *newsk,
++				struct sk_buff *prev, struct sk_buff *next,
++				struct sk_buff_head *list)
++{
++	newsk->next = next;
++	newsk->prev = prev;
++	next->prev  = prev->next = newsk;
++	list->qlen++;
++}
++static inline void __skb_queue_before(struct sk_buff_head *list,
++				      struct sk_buff *next,
++				      struct sk_buff *newsk)
++{
++	__skb_insert(newsk, next->prev, next, list);
++}
++static inline void skb_queue_tail(struct sk_buff_head *list,
++				   struct sk_buff *newsk)
++{
++	mtx_lock(&list->lock);
++	__skb_queue_before(list, (struct sk_buff *)list, newsk);
++	mtx_unlock(&list->lock);
++}
++static inline struct sk_buff *skb_peek(struct sk_buff_head *list_)
++{
++	struct sk_buff *list = ((struct sk_buff *)list_)->next;
++	if (list == (struct sk_buff *)list_)
++		list = NULL;
++	return list;
++}
++static inline void __skb_unlink(struct sk_buff *skb, struct sk_buff_head *list)
++{
++	struct sk_buff *next, *prev;
++
++	list->qlen--;
++	next	   = skb->next;
++	prev	   = skb->prev;
++	skb->next  = skb->prev = NULL;
++	next->prev = prev;
++	prev->next = next;
++}
++
++static inline struct sk_buff *skb_dequeue(struct sk_buff_head *list)
++{
++	mtx_lock(&list->lock);
++
++	struct sk_buff *skb = skb_peek(list);
++	if (skb)
++		__skb_unlink(skb, list);
++
++	mtx_unlock(&list->lock);
++
++	return skb;
++}
++static inline void skb_reserve(struct sk_buff *skb, int len)
++{
++	skb->data += len;
++	skb->tail += len;
++}
++static inline void __skb_queue_head_init(struct sk_buff_head *list)
++{
++	list->prev = list->next = (struct sk_buff *)list;
++	list->qlen = 0;
++}
++/*
++ * This function creates a split out lock class for each invocation;
++ * this is needed for now since a whole lot of users of the skb-queue
++ * infrastructure in drivers have different locking usage (in hardirq)
++ * than the networking core (in softirq only). In the long run either the
++ * network layer or drivers should need annotation to consolidate the
++ * main types of usage into 3 classes.
++ */
++static inline void skb_queue_head_init(struct sk_buff_head *list)
++{
++	_rtw_spinlock_init(&list->lock);
++	__skb_queue_head_init(list);
++}
++unsigned long copy_from_user(void *to, const void *from, unsigned long n);
++unsigned long copy_to_user(void *to, const void *from, unsigned long n);
++struct sk_buff * dev_alloc_skb(unsigned int size);
++struct sk_buff *skb_clone(const struct sk_buff *skb);
++void dev_kfree_skb_any(struct sk_buff *skb);
++#endif //Baron porting from linux, it's all temp solution, needs to check again
++
++
++#if 1 // kenny add Linux compatibility code for Linux USB driver
++#include <dev/usb/usb_compat_linux.h>
++
++#define __init		// __attribute ((constructor))
++#define __exit		// __attribute ((destructor))
++
++/*
++ * Definitions for module_init and module_exit macros.
++ *
++ * These macros will use the SYSINIT framework to call a specified
++ * function (with no arguments) on module loading or unloading.
++ * 
++ */
++
++void module_init_exit_wrapper(void *arg);
++
++#define module_init(initfn)                             \
++        SYSINIT(mod_init_ ## initfn,                    \
++                SI_SUB_KLD, SI_ORDER_FIRST,             \
++                module_init_exit_wrapper, initfn)
++
++#define module_exit(exitfn)                             \
++        SYSUNINIT(mod_exit_ ## exitfn,                  \
++                  SI_SUB_KLD, SI_ORDER_ANY,             \
++                  module_init_exit_wrapper, exitfn)
++
++/*
++ * The usb_register and usb_deregister functions are used to register
++ * usb drivers with the usb subsystem. 
++ */
++int usb_register(struct usb_driver *driver);
++int usb_deregister(struct usb_driver *driver);
++
++/*
++ * usb_get_dev and usb_put_dev - increment/decrement the reference count 
++ * of the usb device structure.
++ *
++ * Original body of usb_get_dev:
++ *
++ *       if (dev)
++ *               get_device(&dev->dev);
++ *       return dev;
++ *
++ * Reference counts are not currently used in this compatibility
++ * layer. So these functions will do nothing.
++ */
++static inline struct usb_device *
++usb_get_dev(struct usb_device *dev)
++{
++        return dev;
++}
++
++static inline void 
++usb_put_dev(struct usb_device *dev)
++{
++        return;
++}
++
++
++// rtw_usb_compat_linux
++int rtw_usb_submit_urb(struct urb *urb, uint16_t mem_flags);
++int rtw_usb_unlink_urb(struct urb *urb);
++int rtw_usb_clear_halt(struct usb_device *dev, struct usb_host_endpoint *uhe);
++int rtw_usb_control_msg(struct usb_device *dev, struct usb_host_endpoint *uhe,
++    uint8_t request, uint8_t requesttype,
++    uint16_t value, uint16_t index, void *data,
++    uint16_t size, usb_timeout_t timeout);
++int rtw_usb_set_interface(struct usb_device *dev, uint8_t iface_no, uint8_t alt_index);
++int rtw_usb_setup_endpoint(struct usb_device *dev,
++    struct usb_host_endpoint *uhe, usb_size_t bufsize);
++struct urb *rtw_usb_alloc_urb(uint16_t iso_packets, uint16_t mem_flags);
++struct usb_host_endpoint *rtw_usb_find_host_endpoint(struct usb_device *dev, uint8_t type, uint8_t ep);
++struct usb_host_interface *rtw_usb_altnum_to_altsetting(const struct usb_interface *intf, uint8_t alt_index);
++struct usb_interface *rtw_usb_ifnum_to_if(struct usb_device *dev, uint8_t iface_no);
++void *rtw_usb_buffer_alloc(struct usb_device *dev, usb_size_t size, uint8_t *dma_addr);
++void *rtw_usbd_get_intfdata(struct usb_interface *intf);
++void rtw_usb_linux_register(void *arg);
++void rtw_usb_linux_deregister(void *arg);
++void rtw_usb_linux_free_device(struct usb_device *dev);
++void rtw_usb_buffer_free(struct usb_device *dev, usb_size_t size,
++    void *addr, uint8_t dma_addr);
++void rtw_usb_free_urb(struct urb *urb);
++void rtw_usb_init_urb(struct urb *urb);
++void rtw_usb_kill_urb(struct urb *urb);
++void rtw_usb_set_intfdata(struct usb_interface *intf, void *data);
++void rtw_usb_fill_bulk_urb(struct urb *urb, struct usb_device *udev,
++    struct usb_host_endpoint *uhe, void *buf,
++    int length, usb_complete_t callback, void *arg);
++int rtw_usb_bulk_msg(struct usb_device *udev, struct usb_host_endpoint *uhe,
++    void *data, int len, uint16_t *pactlen, usb_timeout_t timeout);
++void *usb_get_intfdata(struct usb_interface *intf);
++int usb_linux_init_endpoints(struct usb_device *udev);
++
++
++
++typedef struct urb *  PURB;
++
++typedef unsigned gfp_t;
++#define __GFP_WAIT      ((gfp_t)0x10u)  /* Can wait and reschedule? */
++#define __GFP_HIGH      ((gfp_t)0x20u)  /* Should access emergency pools? */
++#define __GFP_IO        ((gfp_t)0x40u)  /* Can start physical IO? */
++#define __GFP_FS        ((gfp_t)0x80u)  /* Can call down to low-level FS? */
++#define __GFP_COLD      ((gfp_t)0x100u) /* Cache-cold page required */
++#define __GFP_NOWARN    ((gfp_t)0x200u) /* Suppress page allocation failure warning */
++#define __GFP_REPEAT    ((gfp_t)0x400u) /* Retry the allocation.  Might fail */
++#define __GFP_NOFAIL    ((gfp_t)0x800u) /* Retry for ever.  Cannot fail */
++#define __GFP_NORETRY   ((gfp_t)0x1000u)/* Do not retry.  Might fail */
++#define __GFP_NO_GROW   ((gfp_t)0x2000u)/* Slab internal usage */
++#define __GFP_COMP      ((gfp_t)0x4000u)/* Add compound page metadata */
++#define __GFP_ZERO      ((gfp_t)0x8000u)/* Return zeroed page on success */
++#define __GFP_NOMEMALLOC ((gfp_t)0x10000u) /* Don't use emergency reserves */
++#define __GFP_HARDWALL   ((gfp_t)0x20000u) /* Enforce hardwall cpuset memory allocs */
++
++/* This equals 0, but use constants in case they ever change */
++#define GFP_NOWAIT      (GFP_ATOMIC & ~__GFP_HIGH)
++/* GFP_ATOMIC means both !wait (__GFP_WAIT not set) and use emergency pool */
++#define GFP_ATOMIC      (__GFP_HIGH)
++#define GFP_NOIO        (__GFP_WAIT)
++#define GFP_NOFS        (__GFP_WAIT | __GFP_IO)
++#define GFP_KERNEL      (__GFP_WAIT | __GFP_IO | __GFP_FS)
++#define GFP_USER        (__GFP_WAIT | __GFP_IO | __GFP_FS | __GFP_HARDWALL)
++#define GFP_HIGHUSER    (__GFP_WAIT | __GFP_IO | __GFP_FS | __GFP_HARDWALL | \
++                         __GFP_HIGHMEM)
++
++
++#endif // kenny add Linux compatibility code for Linux USB
++
++
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
++	#define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
++#endif
++
++__inline static _list *get_next(_list	*list)
++{
++	return list->next;
++}	
++
++__inline static _list	*get_list_head(_queue	*queue)
++{
++	return (&(queue->queue));
++}
++
++	
++#define LIST_CONTAINOR(ptr, type, member) \
++        ((type *)((char *)(ptr)-(SIZE_T)(&((type *)0)->member)))	
++
++        
++__inline static void _enter_critical(_lock *plock, _irqL *pirqL)
++{
++	spin_lock_irqsave(plock, *pirqL);
++}
++
++__inline static void _exit_critical(_lock *plock, _irqL *pirqL)
++{
++	spin_unlock_irqrestore(plock, *pirqL);
++}
++
++__inline static void _enter_critical_ex(_lock *plock, _irqL *pirqL)
++{
++	spin_lock_irqsave(plock, *pirqL);
++}
++
++__inline static void _exit_critical_ex(_lock *plock, _irqL *pirqL)
++{
++	spin_unlock_irqrestore(plock, *pirqL);
++}
++
++__inline static void _enter_critical_bh(_lock *plock, _irqL *pirqL)
++{
++	spin_lock_bh(plock, *pirqL);
++}
++
++__inline static void _exit_critical_bh(_lock *plock, _irqL *pirqL)
++{
++	spin_unlock_bh(plock, *pirqL);
++}
++
++__inline static void _enter_critical_mutex(_mutex *pmutex, _irqL *pirqL)
++{
++
++		mtx_lock(pmutex);
++
++}
++
++
++__inline static void _exit_critical_mutex(_mutex *pmutex, _irqL *pirqL)
++{
++
++		mtx_unlock(pmutex);
++
++}
++static inline void __list_del(struct list_head * prev, struct list_head * next)
++{
++	next->prev = prev;
++	prev->next = next;
++}
++static inline void INIT_LIST_HEAD(struct list_head *list)
++{
++	list->next = list;
++	list->prev = list;
++}
++__inline static void rtw_list_delete(_list *plist)
++{
++	__list_del(plist->prev, plist->next);
++	INIT_LIST_HEAD(plist);
++}
++
++__inline static void _init_timer(_timer *ptimer,_nic_hdl padapter,void *pfunc,void* cntx)
++{
++	ptimer->function = pfunc;
++	ptimer->arg = cntx;
++	callout_init(&ptimer->callout, CALLOUT_MPSAFE);
++}
++
++__inline static void _set_timer(_timer *ptimer,u32 delay_time)
++{	
++	//	mod_timer(ptimer , (jiffies+(delay_time*HZ/1000)));
++	if(ptimer->function && ptimer->arg){
++		rtw_mtx_lock(NULL);
++		callout_reset(&ptimer->callout, delay_time,ptimer->function, ptimer->arg);
++		rtw_mtx_unlock(NULL);
++	}
++}
++
++__inline static void _cancel_timer(_timer *ptimer,u8 *bcancelled)
++{
++	//	del_timer_sync(ptimer); 	
++	//	*bcancelled=  _TRUE;//TRUE ==1; FALSE==0	
++	rtw_mtx_lock(NULL);
++	callout_drain(&ptimer->callout);
++	rtw_mtx_unlock(NULL);
++}
++
++__inline static void _init_workitem(_workitem *pwork, void *pfunc, PVOID cntx)
++{
++	printf("%s Not implement yet! \n",__FUNCTION__);
++}
++
++__inline static void _set_workitem(_workitem *pwork)
++{
++	printf("%s Not implement yet! \n",__FUNCTION__);
++//	schedule_work(pwork);
++}
++
++//
++// Global Mutex: can only be used at PASSIVE level.
++//
++
++#define ACQUIRE_GLOBAL_MUTEX(_MutexCounter)                              \
++{                                                               \
++}
++
++#define RELEASE_GLOBAL_MUTEX(_MutexCounter)                              \
++{                                                               \
++}
++
++#define ATOMIC_INIT(i)  { (i) }
++
++#endif //PLATFORM_FREEBSD
++
++
++#ifdef PLATFORM_LINUX
++	#include <linux/version.h>
++	#include <linux/spinlock.h>
++	#include <linux/compiler.h>
++	#include <linux/kernel.h>
++	#include <linux/errno.h>
++	#include <linux/init.h>
++	#include <linux/slab.h>
++	#include <linux/module.h>
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,5))
++	#include <linux/kref.h>
++#endif
++	//#include <linux/smp_lock.h>
++	#include <linux/netdevice.h>
++	#include <linux/skbuff.h>
++	#include <linux/circ_buf.h>
++	#include <asm/uaccess.h>
++	#include <asm/byteorder.h>
++	#include <asm/atomic.h>
++	#include <asm/io.h>
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26))
++	#include <asm/semaphore.h>
++#else
++	#include <linux/semaphore.h>
++#endif
++	#include <linux/sem.h>
++	#include <linux/sched.h>
++	#include <linux/etherdevice.h>
++	#include <linux/wireless.h>
++	#include <net/iw_handler.h>
++	#include <linux/if_arp.h>
++	#include <linux/rtnetlink.h>
++	#include <linux/delay.h>
++	#include <linux/proc_fs.h>	// Necessary because we use the proc fs
++	#include <linux/interrupt.h>	// for struct tasklet_struct
++	#include <linux/ip.h>
++	#include <linux/kthread.h>
++
++#ifdef CONFIG_IOCTL_CFG80211	
++//	#include <linux/ieee80211.h>        
++        #include <net/ieee80211_radiotap.h>
++	#include <net/cfg80211.h>	
++#endif //CONFIG_IOCTL_CFG80211
++
++#ifdef CONFIG_TCP_CSUM_OFFLOAD_TX
++	#include <linux/in.h>
++	#include <linux/udp.h>
++#endif
++
++#ifdef CONFIG_USB_HCI
++	#include <linux/usb.h>
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21))
++	#include <linux/usb_ch9.h>
++#else
++	#include <linux/usb/ch9.h>
++#endif
++#endif
++
++#ifdef CONFIG_PCI_HCI
++	#include <linux/pci.h>
++#endif
++
++	
++#ifdef CONFIG_USB_HCI
++	typedef struct urb *  PURB;
++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,22))
++#ifdef CONFIG_USB_SUSPEND
++#define CONFIG_AUTOSUSPEND	1
++#endif
++#endif
++#endif
++
++	typedef struct 	semaphore _sema;
++	typedef	spinlock_t	_lock;
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37))
++	typedef struct mutex 		_mutex;
++#else
++	typedef struct semaphore	_mutex;
++#endif
++	typedef struct timer_list _timer;
++
++	struct	__queue	{
++		struct	list_head	queue;	
++		_lock	lock;
++	};
++
++	typedef	struct sk_buff	_pkt;
++	typedef unsigned char	_buffer;
++	
++	typedef struct	__queue	_queue;
++	typedef struct	list_head	_list;
++	typedef	int	_OS_STATUS;
++	//typedef u32	_irqL;
++	typedef unsigned long _irqL;
++	typedef	struct	net_device * _nic_hdl;
++	
++	typedef void*		_thread_hdl_;
++	typedef int		thread_return;
++	typedef void*	thread_context;
++
++	#define thread_exit() complete_and_exit(NULL, 0)
++
++	typedef void timer_hdl_return;
++	typedef void* timer_hdl_context;
++	typedef struct work_struct _workitem;
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
++	#define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
++#endif
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22))
++// Porting from linux kernel, for compatible with old kernel.
++static inline unsigned char *skb_tail_pointer(const struct sk_buff *skb)
++{
++	return skb->tail;
++}
++
++static inline void skb_reset_tail_pointer(struct sk_buff *skb)
++{
++	skb->tail = skb->data;
++}
++
++static inline void skb_set_tail_pointer(struct sk_buff *skb, const int offset)
++{
++	skb->tail = skb->data + offset;
++}
++
++static inline unsigned char *skb_end_pointer(const struct sk_buff *skb)
++{
++	return skb->end;
++}
++#endif
++
++__inline static _list *get_next(_list	*list)
++{
++	return list->next;
++}	
++
++__inline static _list	*get_list_head(_queue	*queue)
++{
++	return (&(queue->queue));
++}
++
++	
++#define LIST_CONTAINOR(ptr, type, member) \
++        ((type *)((char *)(ptr)-(SIZE_T)(&((type *)0)->member)))	
++
++        
++__inline static void _enter_critical(_lock *plock, _irqL *pirqL)
++{
++	spin_lock_irqsave(plock, *pirqL);
++}
++
++__inline static void _exit_critical(_lock *plock, _irqL *pirqL)
++{
++	spin_unlock_irqrestore(plock, *pirqL);
++}
++
++__inline static void _enter_critical_ex(_lock *plock, _irqL *pirqL)
++{
++	spin_lock_irqsave(plock, *pirqL);
++}
++
++__inline static void _exit_critical_ex(_lock *plock, _irqL *pirqL)
++{
++	spin_unlock_irqrestore(plock, *pirqL);
++}
++
++__inline static void _enter_critical_bh(_lock *plock, _irqL *pirqL)
++{
++	spin_lock_bh(plock);
++}
++
++__inline static void _exit_critical_bh(_lock *plock, _irqL *pirqL)
++{
++	spin_unlock_bh(plock);
++}
++
++__inline static void _enter_critical_mutex(_mutex *pmutex, _irqL *pirqL)
++{
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37))
++		mutex_lock(pmutex);
++#else
++		down(pmutex);
++#endif
++}
++
++
++__inline static void _exit_critical_mutex(_mutex *pmutex, _irqL *pirqL)
++{
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37))
++		mutex_unlock(pmutex);
++#else
++		up(pmutex);
++#endif
++}
++
++__inline static void rtw_list_delete(_list *plist)
++{
++	list_del_init(plist);
++}
++
++__inline static void _init_timer(_timer *ptimer,_nic_hdl nic_hdl,void *pfunc,void* cntx)
++{
++	//setup_timer(ptimer, pfunc,(u32)cntx);	
++	ptimer->function = pfunc;
++	ptimer->data = (unsigned long)cntx;
++	init_timer(ptimer);
++}
++
++__inline static void _set_timer(_timer *ptimer,u32 delay_time)
++{	
++	mod_timer(ptimer , (jiffies+(delay_time*HZ/1000)));	
++}
++
++__inline static void _cancel_timer(_timer *ptimer,u8 *bcancelled)
++{
++	del_timer_sync(ptimer); 	
++	*bcancelled=  _TRUE;//TRUE ==1; FALSE==0
++}
++
++#ifdef PLATFORM_LINUX
++#define RTW_TIMER_HDL_ARGS void *FunctionContext
++#elif defined(PLATFORM_OS_CE) || defined(PLATFORM_WINDOWS)
++#define RTW_TIMER_HDL_ARGS IN PVOID SystemSpecific1, IN PVOID FunctionContext, IN PVOID SystemSpecific2, IN PVOID SystemSpecific3
++#endif
++
++#define RTW_TIMER_HDL_NAME(name) rtw_##name##_timer_hdl
++#define RTW_DECLARE_TIMER_HDL(name) void RTW_TIMER_HDL_NAME(name)(RTW_TIMER_HDL_ARGS)
++
++
++__inline static void _init_workitem(_workitem *pwork, void *pfunc, PVOID cntx)
++{
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
++	INIT_WORK(pwork, pfunc);
++#else
++	INIT_WORK(pwork, pfunc,pwork);
++#endif
++}
++
++__inline static void _set_workitem(_workitem *pwork)
++{
++	schedule_work(pwork);
++}
++
++__inline static void _cancel_workitem_sync(_workitem *pwork)
++{
++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,22))
++	cancel_work_sync(pwork);
++#else
++	flush_scheduled_work();
++#endif
++}
++
++//
++// Global Mutex: can only be used at PASSIVE level.
++//
++
++#define ACQUIRE_GLOBAL_MUTEX(_MutexCounter)                              \
++{                                                               \
++	while (atomic_inc_return((atomic_t *)&(_MutexCounter)) != 1)\
++	{                                                           \
++		atomic_dec((atomic_t *)&(_MutexCounter));        \
++		msleep(10);                          \
++	}                                                           \
++}
++
++#define RELEASE_GLOBAL_MUTEX(_MutexCounter)                              \
++{                                                               \
++	atomic_dec((atomic_t *)&(_MutexCounter));        \
++}
++
++static inline int rtw_netif_queue_stopped(struct net_device *pnetdev)
++{
++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35))
++	return (netif_tx_queue_stopped(netdev_get_tx_queue(pnetdev, 0)) &&
++		netif_tx_queue_stopped(netdev_get_tx_queue(pnetdev, 1)) &&
++		netif_tx_queue_stopped(netdev_get_tx_queue(pnetdev, 2)) &&
++		netif_tx_queue_stopped(netdev_get_tx_queue(pnetdev, 3)) );
++#else
++	return netif_queue_stopped(pnetdev);
++#endif
++}
++
++static inline void rtw_netif_wake_queue(struct net_device *pnetdev)
++{
++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35))
++	netif_tx_wake_all_queues(pnetdev);
++#else
++	netif_wake_queue(pnetdev);
++#endif
++}
++
++static inline void rtw_netif_start_queue(struct net_device *pnetdev)
++{
++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35))
++	netif_tx_start_all_queues(pnetdev);
++#else
++	netif_start_queue(pnetdev);
++#endif
++}
++
++static inline void rtw_netif_stop_queue(struct net_device *pnetdev)
++{
++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35))
++	netif_tx_stop_all_queues(pnetdev);
++#else
++	netif_stop_queue(pnetdev);
++#endif
++}
++
++#endif	// PLATFORM_LINUX
++
++
++#ifdef PLATFORM_OS_XP
++
++	#include <ndis.h>
++	#include <ntddk.h>
++	#include <ntddndis.h>
++	#include <ntdef.h>
++
++#ifdef CONFIG_USB_HCI
++	#include <usb.h>
++	#include <usbioctl.h>
++	#include <usbdlib.h>
++#endif
++
++	typedef KSEMAPHORE 	_sema;
++	typedef	LIST_ENTRY	_list;
++	typedef NDIS_STATUS _OS_STATUS;
++	
++
++	typedef NDIS_SPIN_LOCK	_lock;
++
++	typedef KMUTEX 			_mutex;
++
++	typedef KIRQL	_irqL;
++
++	// USB_PIPE for WINCE , but handle can be use just integer under windows
++	typedef NDIS_HANDLE  _nic_hdl;
++
++
++	typedef NDIS_MINIPORT_TIMER    _timer;
++
++	struct	__queue	{
++		LIST_ENTRY	queue;	
++		_lock	lock;
++	};
++
++	typedef	NDIS_PACKET	_pkt;
++	typedef NDIS_BUFFER	_buffer;
++	typedef struct	__queue	_queue;
++	
++	typedef PKTHREAD _thread_hdl_;
++	typedef void	thread_return;
++	typedef void* thread_context;
++
++	typedef NDIS_WORK_ITEM _workitem;
++
++	#define thread_exit() PsTerminateSystemThread(STATUS_SUCCESS);
++
++	#define HZ			10000000
++	#define SEMA_UPBND	(0x7FFFFFFF)   //8192
++	
++__inline static _list *get_next(_list	*list)
++{
++	return list->Flink;
++}	
++
++__inline static _list	*get_list_head(_queue	*queue)
++{
++	return (&(queue->queue));
++}
++	
++
++#define LIST_CONTAINOR(ptr, type, member) CONTAINING_RECORD(ptr, type, member)
++     
++
++__inline static _enter_critical(_lock *plock, _irqL *pirqL)
++{
++	NdisAcquireSpinLock(plock);	
++}
++
++__inline static _exit_critical(_lock *plock, _irqL *pirqL)
++{
++	NdisReleaseSpinLock(plock);	
++}
++
++
++__inline static _enter_critical_ex(_lock *plock, _irqL *pirqL)
++{
++	NdisDprAcquireSpinLock(plock);	
++}
++
++__inline static _exit_critical_ex(_lock *plock, _irqL *pirqL)
++{
++	NdisDprReleaseSpinLock(plock);	
++}
++
++__inline static void _enter_critical_bh(_lock *plock, _irqL *pirqL)
++{
++	NdisDprAcquireSpinLock(plock);
++}
++
++__inline static void _exit_critical_bh(_lock *plock, _irqL *pirqL)
++{
++	NdisDprReleaseSpinLock(plock);
++}
++
++__inline static _enter_critical_mutex(_mutex *pmutex, _irqL *pirqL)
++{
++	KeWaitForSingleObject(pmutex, Executive, KernelMode, FALSE, NULL);
++}
++
++
++__inline static _exit_critical_mutex(_mutex *pmutex, _irqL *pirqL)
++{
++	KeReleaseMutex(pmutex, FALSE);
++}
++
++
++__inline static void rtw_list_delete(_list *plist)
++{
++	RemoveEntryList(plist);
++	InitializeListHead(plist);	
++}
++
++__inline static void _init_timer(_timer *ptimer,_nic_hdl nic_hdl,void *pfunc,PVOID cntx)
++{
++	NdisMInitializeTimer(ptimer, nic_hdl, pfunc, cntx);
++}
++
++__inline static void _set_timer(_timer *ptimer,u32 delay_time)
++{	
++ 	NdisMSetTimer(ptimer,delay_time);	
++}
++
++__inline static void _cancel_timer(_timer *ptimer,u8 *bcancelled)
++{
++	NdisMCancelTimer(ptimer,bcancelled);
++}
++
++__inline static void _init_workitem(_workitem *pwork, void *pfunc, PVOID cntx)
++{
++
++	NdisInitializeWorkItem(pwork, pfunc, cntx);
++}
++
++__inline static void _set_workitem(_workitem *pwork)
++{
++	NdisScheduleWorkItem(pwork);
++}
++
++
++#define ATOMIC_INIT(i)  { (i) }
++
++//
++// Global Mutex: can only be used at PASSIVE level.
++//
++
++#define ACQUIRE_GLOBAL_MUTEX(_MutexCounter)                              \
++{                                                               \
++    while (NdisInterlockedIncrement((PULONG)&(_MutexCounter)) != 1)\
++    {                                                           \
++        NdisInterlockedDecrement((PULONG)&(_MutexCounter));        \
++        NdisMSleep(10000);                          \
++    }                                                           \
++}
++
++#define RELEASE_GLOBAL_MUTEX(_MutexCounter)                              \
++{                                                               \
++    NdisInterlockedDecrement((PULONG)&(_MutexCounter));              \
++}
++
++#endif // PLATFORM_OS_XP
++
++
++#ifdef PLATFORM_OS_CE
++#include <osdep_ce_service.h>
++#endif
++
++#include <rtw_byteorder.h>
++
++#ifndef BIT
++	#define BIT(x)	( 1 << (x))
++#endif
++
++extern int RTW_STATUS_CODE(int error_code);
++
++#define CONFIG_USE_VMALLOC
++
++/* flags used for rtw_mstat_update() */
++enum mstat_f {
++	/* type: 0x00ff */
++	MSTAT_TYPE_VIR = 0x00,
++	MSTAT_TYPE_PHY= 0x01,
++	MSTAT_TYPE_SKB = 0x02,
++	MSTAT_TYPE_USB = 0x03,
++	MSTAT_TYPE_MAX = 0x04,
++
++	/* func: 0xff00 */
++	MSTAT_FUNC_UNSPECIFIED = 0x00<<8,
++	MSTAT_FUNC_IO = 0x01<<8,
++	MSTAT_FUNC_TX_IO = 0x02<<8,
++	MSTAT_FUNC_RX_IO = 0x03<<8,
++	MSTAT_FUNC_TX = 0x04<<8,
++	MSTAT_FUNC_RX = 0x05<<8,
++	MSTAT_FUNC_MAX = 0x06<<8,
++};
++
++#define mstat_tf_idx(flags) ((flags)&0xff)
++#define mstat_ff_idx(flags) (((flags)&0xff00) >> 8)
++
++typedef enum mstat_status{
++	MSTAT_ALLOC_SUCCESS = 0,
++	MSTAT_ALLOC_FAIL,
++	MSTAT_FREE
++} MSTAT_STATUS;
++
++#ifdef DBG_MEM_ALLOC
++void rtw_mstat_update(const enum mstat_f flags, const MSTAT_STATUS status, u32 sz);
++int _rtw_mstat_dump(char *buf, int len);
++void rtw_mstat_dump (void);
++u8* dbg_rtw_vmalloc(u32 sz, const enum mstat_f flags, const char *func, const int line);
++u8* dbg_rtw_zvmalloc(u32 sz, const enum mstat_f flags, const char *func, const int line);
++void dbg_rtw_vmfree(u8 *pbuf, const enum mstat_f flags, u32 sz, const char *func, const int line);
++u8* dbg_rtw_malloc(u32 sz, const enum mstat_f flags, const char *func, const int line);
++u8* dbg_rtw_zmalloc(u32 sz, const enum mstat_f flags, const char *func, const int line);
++void dbg_rtw_mfree(u8 *pbuf, const enum mstat_f flags, u32 sz, const char *func, const int line);
++
++struct sk_buff * dbg_rtw_skb_alloc(unsigned int size, const enum mstat_f flags, const char *func, const int line);
++void dbg_rtw_skb_free(struct sk_buff *skb, const enum mstat_f flags, const char *func, const int line);
++struct sk_buff *dbg_rtw_skb_copy(const struct sk_buff *skb, const enum mstat_f flags, const char *func, const int line);
++struct sk_buff *dbg_rtw_skb_clone(struct sk_buff *skb, const enum mstat_f flags, const char *func, const int line);
++int dbg_rtw_netif_rx(_nic_hdl ndev, struct sk_buff *skb, const enum mstat_f flags, const char *func, int line);
++void dbg_rtw_skb_queue_purge(struct sk_buff_head *list, enum mstat_f flags, const char *func, int line);
++
++#ifdef CONFIG_USB_HCI
++void *dbg_rtw_usb_buffer_alloc(struct usb_device *dev, size_t size, dma_addr_t *dma, const enum mstat_f flags, const char *func, const int line);
++void dbg_rtw_usb_buffer_free(struct usb_device *dev, size_t size, void *addr, dma_addr_t dma, const enum mstat_f flags, const char *func, const int line);
++#endif /* CONFIG_USB_HCI */
++
++#ifdef CONFIG_USE_VMALLOC
++#define rtw_vmalloc(sz)			dbg_rtw_vmalloc((sz), MSTAT_TYPE_VIR, __FUNCTION__, __LINE__)
++#define rtw_zvmalloc(sz)			dbg_rtw_zvmalloc((sz), MSTAT_TYPE_VIR, __FUNCTION__, __LINE__)
++#define rtw_vmfree(pbuf, sz)		dbg_rtw_vmfree((pbuf), (sz), MSTAT_TYPE_VIR, __FUNCTION__, __LINE__)
++#define rtw_vmalloc_f(sz, mstat_f)			dbg_rtw_vmalloc((sz), ((mstat_f)&0xff00)|MSTAT_TYPE_VIR, __FUNCTION__, __LINE__)
++#define rtw_zvmalloc_f(sz, mstat_f)		dbg_rtw_zvmalloc((sz), ((mstat_f)&0xff00)|MSTAT_TYPE_VIR, __FUNCTION__, __LINE__)
++#define rtw_vmfree_f(pbuf, sz, mstat_f)	dbg_rtw_vmfree((pbuf), (sz), ((mstat_f)&0xff00)|MSTAT_TYPE_VIR, __FUNCTION__, __LINE__)
++#else /* CONFIG_USE_VMALLOC */
++#define rtw_vmalloc(sz)			dbg_rtw_malloc((sz), MSTAT_TYPE_PHY, __FUNCTION__, __LINE__)
++#define rtw_zvmalloc(sz)			dbg_rtw_zmalloc((sz), MSTAT_TYPE_PHY, __FUNCTION__, __LINE__)
++#define rtw_vmfree(pbuf, sz)		dbg_rtw_mfree((pbuf), (sz), MSTAT_TYPE_PHY, __FUNCTION__, __LINE__)
++#define rtw_vmalloc_f(sz, mstat_f)			dbg_rtw_malloc((sz), ((mstat_f)&0xff00)|MSTAT_TYPE_PHY, __FUNCTION__, __LINE__)
++#define rtw_zvmalloc_f(sz, mstat_f)		dbg_rtw_zmalloc((sz), ((mstat_f)&0xff00)|MSTAT_TYPE_PHY, __FUNCTION__, __LINE__)
++#define rtw_vmfree_f(pbuf, sz, mstat_f)	dbg_rtw_mfree((pbuf), (sz), ((mstat_f)&0xff00)|MSTAT_TYPE_PHY, __FUNCTION__, __LINE__)
++#endif /* CONFIG_USE_VMALLOC */
++#define rtw_malloc(sz)			dbg_rtw_malloc((sz), MSTAT_TYPE_PHY, __FUNCTION__, __LINE__)
++#define rtw_zmalloc(sz)			dbg_rtw_zmalloc((sz), MSTAT_TYPE_PHY, __FUNCTION__, __LINE__)
++#define rtw_mfree(pbuf, sz)		dbg_rtw_mfree((pbuf), (sz), MSTAT_TYPE_PHY, __FUNCTION__, __LINE__)
++#define rtw_malloc_f(sz, mstat_f)			dbg_rtw_malloc((sz), ((mstat_f)&0xff00)|MSTAT_TYPE_PHY, __FUNCTION__, __LINE__)
++#define rtw_zmalloc_f(sz, mstat_f)			dbg_rtw_zmalloc((sz), ((mstat_f)&0xff00)|MSTAT_TYPE_PHY, __FUNCTION__, __LINE__)
++#define rtw_mfree_f(pbuf, sz, mstat_f)		dbg_rtw_mfree((pbuf), (sz), ((mstat_f)&0xff00)|MSTAT_TYPE_PHY, __FUNCTION__, __LINE__)
++
++#define rtw_skb_alloc(size)	dbg_rtw_skb_alloc((size), MSTAT_TYPE_SKB, __FUNCTION__, __LINE__)
++#define rtw_skb_free(skb)	dbg_rtw_skb_free((skb), MSTAT_TYPE_SKB, __FUNCTION__, __LINE__)
++#define rtw_skb_alloc_f(size, mstat_f)	dbg_rtw_skb_alloc((size), ((mstat_f)&0xff00)|MSTAT_TYPE_SKB, __FUNCTION__, __LINE__)
++#define rtw_skb_free_f(skb, mstat_f)	dbg_rtw_skb_free((skb), ((mstat_f)&0xff00)|MSTAT_TYPE_SKB, __FUNCTION__, __LINE__)
++#define rtw_skb_copy(skb)	dbg_rtw_skb_copy((skb), MSTAT_TYPE_SKB, __FUNCTION__, __LINE__)
++#define rtw_skb_clone(skb)	dbg_rtw_skb_clone((skb), MSTAT_TYPE_SKB, __FUNCTION__, __LINE__)
++#define rtw_skb_copy_f(skb, mstat_f)	dbg_rtw_skb_copy((skb), ((mstat_f)&0xff00)|MSTAT_TYPE_SKB, __FUNCTION__, __LINE__)
++#define rtw_skb_clone_f(skb, mstat_f)	dbg_rtw_skb_clone((skb), ((mstat_f)&0xff00)|MSTAT_TYPE_SKB, __FUNCTION__, __LINE__)
++#define rtw_netif_rx(ndev, skb)	dbg_rtw_netif_rx(ndev, skb, MSTAT_TYPE_SKB, __FUNCTION__, __LINE__)
++#define rtw_skb_queue_purge(sk_buff_head) dbg_rtw_skb_queue_purge(sk_buff_head, MSTAT_TYPE_SKB, __FUNCTION__, __LINE__)
++#ifdef CONFIG_USB_HCI
++#define rtw_usb_buffer_alloc(dev, size, dma)		dbg_rtw_usb_buffer_alloc((dev), (size), (dma), MSTAT_TYPE_USB, __FUNCTION__, __LINE__)
++#define rtw_usb_buffer_free(dev, size, addr, dma)	dbg_rtw_usb_buffer_free((dev), (size), (addr), (dma), MSTAT_TYPE_USB, __FUNCTION__, __LINE__)
++#define rtw_usb_buffer_alloc_f(dev, size, dma, mstat_f)			dbg_rtw_usb_buffer_alloc((dev), (size), (dma), ((mstat_f)&0xff00)|MSTAT_TYPE_USB, __FUNCTION__, __LINE__)
++#define rtw_usb_buffer_free_f(dev, size, addr, dma, mstat_f)	dbg_rtw_usb_buffer_free((dev), (size), (addr), (dma), ((mstat_f)&0xff00)|MSTAT_TYPE_USB, __FUNCTION__, __LINE__)
++#endif /* CONFIG_USB_HCI */
++
++#else /* DBG_MEM_ALLOC */
++#define rtw_mstat_update(flag, status, sz) do {} while(0)
++#define rtw_mstat_dump() do {} while(0)
++u8*	_rtw_vmalloc(u32 sz);
++u8*	_rtw_zvmalloc(u32 sz);
++void	_rtw_vmfree(u8 *pbuf, u32 sz);
++u8*	_rtw_zmalloc(u32 sz);
++u8*	_rtw_malloc(u32 sz);
++void	_rtw_mfree(u8 *pbuf, u32 sz);
++
++struct sk_buff *_rtw_skb_alloc(u32 sz);
++void _rtw_skb_free(struct sk_buff *skb);
++struct sk_buff *_rtw_skb_copy(const struct sk_buff *skb);
++struct sk_buff *_rtw_skb_clone(struct sk_buff *skb);
++int _rtw_netif_rx(_nic_hdl ndev, struct sk_buff *skb);
++void _rtw_skb_queue_purge(struct sk_buff_head *list);
++
++#ifdef CONFIG_USB_HCI
++void *_rtw_usb_buffer_alloc(struct usb_device *dev, size_t size, dma_addr_t *dma);
++void _rtw_usb_buffer_free(struct usb_device *dev, size_t size, void *addr, dma_addr_t dma);
++#endif /* CONFIG_USB_HCI */
++
++#ifdef CONFIG_USE_VMALLOC
++#define rtw_vmalloc(sz)			_rtw_vmalloc((sz))
++#define rtw_zvmalloc(sz)			_rtw_zvmalloc((sz))
++#define rtw_vmfree(pbuf, sz)		_rtw_vmfree((pbuf), (sz))
++#define rtw_vmalloc_f(sz, mstat_f)			_rtw_vmalloc((sz))
++#define rtw_zvmalloc_f(sz, mstat_f)		_rtw_zvmalloc((sz))
++#define rtw_vmfree_f(pbuf, sz, mstat_f)	_rtw_vmfree((pbuf), (sz))
++#else /* CONFIG_USE_VMALLOC */
++#define rtw_vmalloc(sz)			_rtw_malloc((sz))
++#define rtw_zvmalloc(sz)			_rtw_zmalloc((sz))
++#define rtw_vmfree(pbuf, sz)		_rtw_mfree((pbuf), (sz))
++#define rtw_vmalloc_f(sz, mstat_f)			_rtw_malloc((sz))
++#define rtw_zvmalloc_f(sz, mstat_f)		_rtw_zmalloc((sz))
++#define rtw_vmfree_f(pbuf, sz, mstat_f)	_rtw_mfree((pbuf), (sz))
++#endif /* CONFIG_USE_VMALLOC */
++#define rtw_malloc(sz)			_rtw_malloc((sz))
++#define rtw_zmalloc(sz)			_rtw_zmalloc((sz))
++#define rtw_mfree(pbuf, sz)		_rtw_mfree((pbuf), (sz))
++#define rtw_malloc_f(sz, mstat_f)			_rtw_malloc((sz))
++#define rtw_zmalloc_f(sz, mstat_f)			_rtw_zmalloc((sz))
++#define rtw_mfree_f(pbuf, sz, mstat_f)		_rtw_mfree((pbuf), (sz))
++
++#define rtw_skb_alloc(size) _rtw_skb_alloc((size))
++#define rtw_skb_free(skb) _rtw_skb_free((skb))
++#define rtw_skb_alloc_f(size, mstat_f)	_rtw_skb_alloc((size))
++#define rtw_skb_free_f(skb, mstat_f)	_rtw_skb_free((skb))
++#define rtw_skb_copy(skb)	_rtw_skb_copy((skb))
++#define rtw_skb_clone(skb)	_rtw_skb_clone((skb))
++#define rtw_skb_copy_f(skb, mstat_f)	_rtw_skb_copy((skb))
++#define rtw_skb_clone_f(skb, mstat_f)	_rtw_skb_clone((skb))
++#define rtw_netif_rx(ndev, skb) _rtw_netif_rx(ndev, skb)
++#define rtw_skb_queue_purge(sk_buff_head) _rtw_skb_queue_purge(sk_buff_head)
++#ifdef CONFIG_USB_HCI
++#define rtw_usb_buffer_alloc(dev, size, dma) _rtw_usb_buffer_alloc((dev), (size), (dma))
++#define rtw_usb_buffer_free(dev, size, addr, dma) _rtw_usb_buffer_free((dev), (size), (addr), (dma))
++#define rtw_usb_buffer_alloc_f(dev, size, dma, mstat_f) _rtw_usb_buffer_alloc((dev), (size), (dma))
++#define rtw_usb_buffer_free_f(dev, size, addr, dma, mstat_f) _rtw_usb_buffer_free((dev), (size), (addr), (dma))
++#endif /* CONFIG_USB_HCI */
++#endif /* DBG_MEM_ALLOC */
++
++extern void*	rtw_malloc2d(int h, int w, int size);
++extern void	rtw_mfree2d(void *pbuf, int h, int w, int size);
++
++extern void	_rtw_memcpy(void* dec, void* sour, u32 sz);
++extern int	_rtw_memcmp(void *dst, void *src, u32 sz);
++extern void	_rtw_memset(void *pbuf, int c, u32 sz);
++
++extern void	_rtw_init_listhead(_list *list);
++extern u32	rtw_is_list_empty(_list *phead);
++extern void	rtw_list_insert_head(_list *plist, _list *phead);
++extern void	rtw_list_insert_tail(_list *plist, _list *phead);
++#ifndef PLATFORM_FREEBSD
++extern void	rtw_list_delete(_list *plist);
++#endif //PLATFORM_FREEBSD
++
++extern void	_rtw_init_sema(_sema *sema, int init_val);
++extern void	_rtw_free_sema(_sema	*sema);
++extern void	_rtw_up_sema(_sema	*sema);
++extern u32	_rtw_down_sema(_sema *sema);
++extern void	_rtw_mutex_init(_mutex *pmutex);
++extern void	_rtw_mutex_free(_mutex *pmutex);
++#ifndef PLATFORM_FREEBSD
++extern void	_rtw_spinlock_init(_lock *plock);
++#endif //PLATFORM_FREEBSD
++extern void	_rtw_spinlock_free(_lock *plock);
++extern void	_rtw_spinlock(_lock	*plock);
++extern void	_rtw_spinunlock(_lock	*plock);
++extern void	_rtw_spinlock_ex(_lock	*plock);
++extern void	_rtw_spinunlock_ex(_lock	*plock);
++
++extern void	_rtw_init_queue(_queue	*pqueue);
++extern u32	_rtw_queue_empty(_queue	*pqueue);
++extern u32	rtw_end_of_queue_search(_list *queue, _list *pelement);
++
++extern u32	rtw_get_current_time(void);
++extern u32	rtw_systime_to_ms(u32 systime);
++extern u32	rtw_ms_to_systime(u32 ms);
++extern s32	rtw_get_passing_time_ms(u32 start);
++extern s32	rtw_get_time_interval_ms(u32 start, u32 end);
++
++extern void	rtw_sleep_schedulable(int ms);
++
++extern void	rtw_msleep_os(int ms);
++extern void	rtw_usleep_os(int us);
++
++extern u32 	rtw_atoi(u8* s);
++
++#ifdef DBG_DELAY_OS
++#define rtw_mdelay_os(ms) _rtw_mdelay_os((ms), __FUNCTION__, __LINE__)
++#define rtw_udelay_os(ms) _rtw_udelay_os((ms), __FUNCTION__, __LINE__)
++extern void _rtw_mdelay_os(int ms, const char *func, const int line);
++extern void _rtw_udelay_os(int us, const char *func, const int line);
++#else
++extern void	rtw_mdelay_os(int ms);
++extern void	rtw_udelay_os(int us);
++#endif
++
++extern void rtw_yield_os(void);
++
++
++__inline static unsigned char _cancel_timer_ex(_timer *ptimer)
++{
++#ifdef PLATFORM_LINUX
++	return del_timer_sync(ptimer);
++#endif
++#ifdef PLATFORM_FREEBSD
++	_cancel_timer(ptimer,0);
++	return 0;
++#endif
++#ifdef PLATFORM_WINDOWS
++	u8 bcancelled;
++	
++	_cancel_timer(ptimer, &bcancelled);
++	
++	return bcancelled;
++#endif
++}
++
++#ifdef PLATFORM_FREEBSD
++static __inline void thread_enter(void *context);
++#endif //PLATFORM_FREEBSD
++static __inline void thread_enter(char *name)
++{
++#ifdef PLATFORM_LINUX
++	#if (LINUX_VERSION_CODE < KERNEL_VERSION(3, 8, 0))
++	daemonize("%s", name);
++	#endif
++	allow_signal(SIGTERM);
++#endif
++#ifdef PLATFORM_FREEBSD
++	printf("%s", "RTKTHREAD_enter");
++#endif
++}
++
++#ifdef PLATFORM_FREEBSD
++#define thread_exit() do{printf("%s", "RTKTHREAD_exit");}while(0)
++#endif //PLATFORM_FREEBSD
++__inline static void flush_signals_thread(void) 
++{
++#ifdef PLATFORM_LINUX
++	if (signal_pending (current)) 
++	{
++		flush_signals(current);
++	}
++#endif
++}
++
++__inline static _OS_STATUS res_to_status(sint res)
++{
++
++
++#if defined (PLATFORM_LINUX) || defined (PLATFORM_MPIXEL) || defined (PLATFORM_FREEBSD)
++	return res;
++#endif
++
++#ifdef PLATFORM_WINDOWS
++
++	if (res == _SUCCESS)
++		return NDIS_STATUS_SUCCESS;
++	else
++		return NDIS_STATUS_FAILURE;
++
++#endif	
++	
++}
++
++__inline static void rtw_dump_stack(void)
++{
++#ifdef PLATFORM_LINUX
++	dump_stack();
++#endif
++}
++
++#ifdef PLATFORM_LINUX
++#define rtw_warn_on(condition) WARN_ON(condition)
++#else
++#define rtw_warn_on(condition) do {} while (0)
++#endif
++
++#define _RND(sz, r) ((((sz)+((r)-1))/(r))*(r))
++#define RND4(x)	(((x >> 2) + (((x & 3) == 0) ?  0: 1)) << 2)
++
++__inline static u32 _RND4(u32 sz)
++{
++
++	u32	val;
++
++	val = ((sz >> 2) + ((sz & 3) ? 1: 0)) << 2;
++	
++	return val;
++
++}
++
++__inline static u32 _RND8(u32 sz)
++{
++
++	u32	val;
++
++	val = ((sz >> 3) + ((sz & 7) ? 1: 0)) << 3;
++	
++	return val;
++
++}
++
++__inline static u32 _RND128(u32 sz)
++{
++
++	u32	val;
++
++	val = ((sz >> 7) + ((sz & 127) ? 1: 0)) << 7;
++	
++	return val;
++
++}
++
++__inline static u32 _RND256(u32 sz)
++{
++
++	u32	val;
++
++	val = ((sz >> 8) + ((sz & 255) ? 1: 0)) << 8;
++	
++	return val;
++
++}
++
++__inline static u32 _RND512(u32 sz)
++{
++
++	u32	val;
++
++	val = ((sz >> 9) + ((sz & 511) ? 1: 0)) << 9;
++	
++	return val;
++
++}
++
++__inline static u32 bitshift(u32 bitmask)
++{
++	u32 i;
++
++	for (i = 0; i <= 31; i++)
++		if (((bitmask>>i) &  0x1) == 1) break;
++
++	return i;
++}
++
++#ifndef MAC_FMT
++#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
++#endif
++#ifndef MAC_ARG
++#define MAC_ARG(x) ((u8*)(x))[0],((u8*)(x))[1],((u8*)(x))[2],((u8*)(x))[3],((u8*)(x))[4],((u8*)(x))[5]
++#endif
++
++//#ifdef __GNUC__
++#ifdef PLATFORM_LINUX
++#define STRUCT_PACKED __attribute__ ((packed))
++#else
++#define STRUCT_PACKED
++#endif
++
++
++// limitation of path length
++#ifdef PLATFORM_LINUX
++	#define PATH_LENGTH_MAX PATH_MAX
++#elif defined(PLATFORM_WINDOWS)
++	#define PATH_LENGTH_MAX MAX_PATH
++#endif
++
++
++// Suspend lock prevent system from going suspend
++#ifdef CONFIG_WAKELOCK
++#include <linux/wakelock.h>
++#elif defined(CONFIG_ANDROID_POWER)
++#include <linux/android_power.h>
++#endif
++
++extern void rtw_suspend_lock_init(void);
++extern void rtw_suspend_lock_uninit(void);
++extern void rtw_lock_suspend(void);
++extern void rtw_unlock_suspend(void);
++extern void rtw_lock_suspend_timeout(u32 timeout_ms);
++
++
++//Atomic integer operations
++#ifdef PLATFORM_LINUX
++	#define ATOMIC_T atomic_t
++#elif defined(PLATFORM_WINDOWS)
++	#define ATOMIC_T LONG
++#elif defined(PLATFORM_FREEBSD)
++	typedef uint32_t ATOMIC_T ;
++#endif
++
++extern void ATOMIC_SET(ATOMIC_T *v, int i);
++extern int ATOMIC_READ(ATOMIC_T *v);
++extern void ATOMIC_ADD(ATOMIC_T *v, int i);
++extern void ATOMIC_SUB(ATOMIC_T *v, int i);
++extern void ATOMIC_INC(ATOMIC_T *v);
++extern void ATOMIC_DEC(ATOMIC_T *v);
++extern int ATOMIC_ADD_RETURN(ATOMIC_T *v, int i);
++extern int ATOMIC_SUB_RETURN(ATOMIC_T *v, int i);
++extern int ATOMIC_INC_RETURN(ATOMIC_T *v);
++extern int ATOMIC_DEC_RETURN(ATOMIC_T *v);
++
++//File operation APIs, just for linux now
++extern int rtw_is_file_readable(char *path);
++extern int rtw_retrive_from_file(char *path, u8* buf, u32 sz);
++extern int rtw_store_to_file(char *path, u8* buf, u32 sz);
++
++
++#if 1 //#ifdef MEM_ALLOC_REFINE_ADAPTOR
++struct rtw_netdev_priv_indicator {
++	void *priv;
++	u32 sizeof_priv;
++};
++struct net_device *rtw_alloc_etherdev_with_old_priv(int sizeof_priv, void *old_priv);
++extern struct net_device * rtw_alloc_etherdev(int sizeof_priv);
++
++#ifndef PLATFORM_FREEBSD
++#define rtw_netdev_priv(netdev) ( ((struct rtw_netdev_priv_indicator *)netdev_priv(netdev))->priv )
++#else //PLATFORM_FREEBSD
++#define rtw_netdev_priv(netdev) (((struct ifnet *)netdev)->if_softc)
++#endif //PLATFORM_FREEBSD
++
++#ifndef PLATFORM_FREEBSD
++extern void rtw_free_netdev(struct net_device * netdev);
++#else //PLATFORM_FREEBSD
++#define rtw_free_netdev(netdev) if_free((netdev))
++#endif //PLATFORM_FREEBSD
++
++#else //MEM_ALLOC_REFINE_ADAPTOR
++
++#define rtw_alloc_etherdev(sizeof_priv) alloc_etherdev((sizeof_priv))
++
++#ifndef PLATFORM_FREEBSD
++#define rtw_netdev_priv(netdev) netdev_priv((netdev))
++#define rtw_free_netdev(netdev) free_netdev((netdev))
++#else //PLATFORM_FREEBSD
++#define rtw_netdev_priv(netdev) (((struct ifnet *)netdev)->if_softc)
++#define rtw_free_netdev(netdev) if_free((netdev))
++#endif //PLATFORM_FREEBSD
++#endif
++
++#ifdef PLATFORM_LINUX
++#define NDEV_FMT "%s"
++#define NDEV_ARG(ndev) ndev->name
++#define ADPT_FMT "%s"
++#define ADPT_ARG(adapter) adapter->pnetdev->name
++#define FUNC_NDEV_FMT "%s(%s)"
++#define FUNC_NDEV_ARG(ndev) __func__, ndev->name
++#define FUNC_ADPT_FMT "%s(%s)"
++#define FUNC_ADPT_ARG(adapter) __func__, adapter->pnetdev->name
++#else
++#define NDEV_FMT "%s"
++#define NDEV_ARG(ndev) ""
++#define ADPT_FMT "%s"
++#define ADPT_ARG(adapter) ""
++#define FUNC_NDEV_FMT "%s"
++#define FUNC_NDEV_ARG(ndev) __func__
++#define FUNC_ADPT_FMT "%s"
++#define FUNC_ADPT_ARG(adapter) __func__
++#endif
++
++#ifdef PLATFORM_LINUX
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27))
++#define rtw_signal_process(pid, sig) kill_pid(find_vpid((pid)),(sig), 1)
++#else //(LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27))
++#define rtw_signal_process(pid, sig) kill_proc((pid), (sig), 1)
++#endif //(LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27))
++#endif //PLATFORM_LINUX
++
++extern u64 rtw_modular64(u64 x, u64 y);
++extern u64 rtw_division64(u64 x, u64 y);
++
++
++/* Macros for handling unaligned memory accesses */
++
++#define RTW_GET_BE16(a) ((u16) (((a)[0] << 8) | (a)[1]))
++#define RTW_PUT_BE16(a, val)			\
++	do {					\
++		(a)[0] = ((u16) (val)) >> 8;	\
++		(a)[1] = ((u16) (val)) & 0xff;	\
++	} while (0)
++
++#define RTW_GET_LE16(a) ((u16) (((a)[1] << 8) | (a)[0]))
++#define RTW_PUT_LE16(a, val)			\
++	do {					\
++		(a)[1] = ((u16) (val)) >> 8;	\
++		(a)[0] = ((u16) (val)) & 0xff;	\
++	} while (0)
++
++#define RTW_GET_BE24(a) ((((u32) (a)[0]) << 16) | (((u32) (a)[1]) << 8) | \
++			 ((u32) (a)[2]))			 
++#define RTW_PUT_BE24(a, val)					\
++	do {							\
++		(a)[0] = (u8) ((((u32) (val)) >> 16) & 0xff);	\
++		(a)[1] = (u8) ((((u32) (val)) >> 8) & 0xff);	\
++		(a)[2] = (u8) (((u32) (val)) & 0xff);		\
++	} while (0)
++
++#define RTW_GET_BE32(a) ((((u32) (a)[0]) << 24) | (((u32) (a)[1]) << 16) | \
++			 (((u32) (a)[2]) << 8) | ((u32) (a)[3]))			 
++#define RTW_PUT_BE32(a, val)					\
++	do {							\
++		(a)[0] = (u8) ((((u32) (val)) >> 24) & 0xff);	\
++		(a)[1] = (u8) ((((u32) (val)) >> 16) & 0xff);	\
++		(a)[2] = (u8) ((((u32) (val)) >> 8) & 0xff);	\
++		(a)[3] = (u8) (((u32) (val)) & 0xff);		\
++	} while (0)
++
++#define RTW_GET_LE32(a) ((((u32) (a)[3]) << 24) | (((u32) (a)[2]) << 16) | \
++			 (((u32) (a)[1]) << 8) | ((u32) (a)[0]))			 
++#define RTW_PUT_LE32(a, val)					\
++	do {							\
++		(a)[3] = (u8) ((((u32) (val)) >> 24) & 0xff);	\
++		(a)[2] = (u8) ((((u32) (val)) >> 16) & 0xff);	\
++		(a)[1] = (u8) ((((u32) (val)) >> 8) & 0xff);	\
++		(a)[0] = (u8) (((u32) (val)) & 0xff);		\
++	} while (0)
++
++#define RTW_GET_BE64(a) ((((u64) (a)[0]) << 56) | (((u64) (a)[1]) << 48) | \
++			 (((u64) (a)[2]) << 40) | (((u64) (a)[3]) << 32) | \
++			 (((u64) (a)[4]) << 24) | (((u64) (a)[5]) << 16) | \
++			 (((u64) (a)[6]) << 8) | ((u64) (a)[7]))			 
++#define RTW_PUT_BE64(a, val)				\
++	do {						\
++		(a)[0] = (u8) (((u64) (val)) >> 56);	\
++		(a)[1] = (u8) (((u64) (val)) >> 48);	\
++		(a)[2] = (u8) (((u64) (val)) >> 40);	\
++		(a)[3] = (u8) (((u64) (val)) >> 32);	\
++		(a)[4] = (u8) (((u64) (val)) >> 24);	\
++		(a)[5] = (u8) (((u64) (val)) >> 16);	\
++		(a)[6] = (u8) (((u64) (val)) >> 8);	\
++		(a)[7] = (u8) (((u64) (val)) & 0xff);	\
++	} while (0)
++
++#define RTW_GET_LE64(a) ((((u64) (a)[7]) << 56) | (((u64) (a)[6]) << 48) | \
++			 (((u64) (a)[5]) << 40) | (((u64) (a)[4]) << 32) | \
++			 (((u64) (a)[3]) << 24) | (((u64) (a)[2]) << 16) | \
++			 (((u64) (a)[1]) << 8) | ((u64) (a)[0]))
++
++void rtw_buf_free(u8 **buf, u32 *buf_len);
++void rtw_buf_update(u8 **buf, u32 *buf_len, u8 *src, u32 src_len);
++
++struct rtw_cbuf {
++	u32 write;
++	u32 read;
++	u32 size;
++	void *bufs[0];
++};
++
++bool rtw_cbuf_full(struct rtw_cbuf *cbuf);
++bool rtw_cbuf_empty(struct rtw_cbuf *cbuf);
++bool rtw_cbuf_push(struct rtw_cbuf *cbuf, void *buf);
++void *rtw_cbuf_pop(struct rtw_cbuf *cbuf);
++struct rtw_cbuf *rtw_cbuf_alloc(u32 size);
++void rtw_cbuf_free(struct rtw_cbuf *cbuf);
++
++#endif
++
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/pci_hal.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/pci_hal.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/pci_hal.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/pci_hal.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,168 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __PCI_HAL_H__
++#define __PCI_HAL_H__
++
++
++#define	INTEL_VENDOR_ID				0x8086
++#define	SIS_VENDOR_ID					0x1039
++#define	ATI_VENDOR_ID					0x1002
++#define	ATI_DEVICE_ID					0x7914
++#define	AMD_VENDOR_ID					0x1022
++
++#define	PCI_MAX_BRIDGE_NUMBER			255
++#define	PCI_MAX_DEVICES				32
++#define	PCI_MAX_FUNCTION				8
++
++#define	PCI_CONF_ADDRESS   				0x0CF8   // PCI Configuration Space Address 
++#define	PCI_CONF_DATA					0x0CFC   // PCI Configuration Space Data 
++
++#define	PCI_CLASS_BRIDGE_DEV			0x06
++#define	PCI_SUBCLASS_BR_PCI_TO_PCI	0x04
++
++#define 	PCI_CAPABILITY_ID_PCI_EXPRESS	0x10
++
++#define	U1DONTCARE 					0xFF	
++#define	U2DONTCARE 					0xFFFF	
++#define	U4DONTCARE 					0xFFFFFFFF
++
++#define PCI_VENDER_ID_REALTEK		0x10ec
++
++#define HAL_HW_PCI_8180_DEVICE_ID           	0x8180
++#define HAL_HW_PCI_8185_DEVICE_ID           	0x8185	//8185 or 8185b
++#define HAL_HW_PCI_8188_DEVICE_ID           	0x8188	//8185b		
++#define HAL_HW_PCI_8198_DEVICE_ID           	0x8198	//8185b		
++#define HAL_HW_PCI_8190_DEVICE_ID           	0x8190	//8190
++#define HAL_HW_PCI_8723E_DEVICE_ID		0x8723	//8723E
++#define HAL_HW_PCI_8192_DEVICE_ID           	0x8192	//8192 PCI-E
++#define HAL_HW_PCI_8192SE_DEVICE_ID		0x8192	//8192 SE
++#define HAL_HW_PCI_8174_DEVICE_ID           	0x8174	//8192 SE 
++#define HAL_HW_PCI_8173_DEVICE_ID           	0x8173	//8191 SE Crab
++#define HAL_HW_PCI_8172_DEVICE_ID           	0x8172	//8191 SE RE
++#define HAL_HW_PCI_8171_DEVICE_ID           	0x8171	//8191 SE Unicron
++#define HAL_HW_PCI_0045_DEVICE_ID			0x0045	//8190 PCI for Ceraga
++#define HAL_HW_PCI_0046_DEVICE_ID			0x0046	//8190 Cardbus for Ceraga
++#define HAL_HW_PCI_0044_DEVICE_ID			0x0044	//8192e PCIE for Ceraga
++#define HAL_HW_PCI_0047_DEVICE_ID			0x0047	//8192e Express Card for Ceraga
++#define HAL_HW_PCI_700F_DEVICE_ID			0x700F
++#define HAL_HW_PCI_701F_DEVICE_ID			0x701F
++#define HAL_HW_PCI_DLINK_DEVICE_ID		0x3304
++#define HAL_HW_PCI_8192CET_DEVICE_ID		0x8191	//8192ce
++#define HAL_HW_PCI_8192CE_DEVICE_ID		0x8178	//8192ce
++#define HAL_HW_PCI_8191CE_DEVICE_ID		0x8177	//8192ce
++#define HAL_HW_PCI_8188CE_DEVICE_ID		0x8176	//8192ce
++#define HAL_HW_PCI_8192CU_DEVICE_ID      	0x8191	//8192ce
++#define HAL_HW_PCI_8192DE_DEVICE_ID		0x8193	//8192de
++#define HAL_HW_PCI_002B_DEVICE_ID			0x002B	//8192de, provided by HW SD
++
++#define HAL_MEMORY_MAPPED_IO_RANGE_8190PCI 		0x1000     //8190 support 16 pages of IO registers
++#define HAL_HW_PCI_REVISION_ID_8190PCI			0x00
++#define HAL_MEMORY_MAPPED_IO_RANGE_8192PCIE	0x4000	//8192 support 16 pages of IO registers
++#define HAL_HW_PCI_REVISION_ID_8192PCIE			0x01
++#define HAL_MEMORY_MAPPED_IO_RANGE_8192SE		0x4000	//8192 support 16 pages of IO registers
++#define HAL_HW_PCI_REVISION_ID_8192SE			0x10
++#define HAL_HW_PCI_REVISION_ID_8192CE			0x1
++#define HAL_MEMORY_MAPPED_IO_RANGE_8192CE		0x4000	//8192 support 16 pages of IO registers
++#define HAL_HW_PCI_REVISION_ID_8192DE			0x0
++#define HAL_MEMORY_MAPPED_IO_RANGE_8192DE		0x4000	//8192 support 16 pages of IO registers
++
++enum pci_bridge_vendor {
++	PCI_BRIDGE_VENDOR_INTEL = 0x0,//0b'0000,0001
++	PCI_BRIDGE_VENDOR_ATI, //= 0x02,//0b'0000,0010
++	PCI_BRIDGE_VENDOR_AMD, //= 0x04,//0b'0000,0100
++	PCI_BRIDGE_VENDOR_SIS ,//= 0x08,//0b'0000,1000
++	PCI_BRIDGE_VENDOR_UNKNOWN, //= 0x40,//0b'0100,0000
++	PCI_BRIDGE_VENDOR_MAX ,//= 0x80
++} ;
++
++struct rt_pci_capabilities_header {
++	u8	capability_id;
++	u8	next;
++};
++
++struct pci_priv{
++	u8	linkctrl_reg;
++	
++	u8	busnumber;
++	u8	devnumber;	
++	u8	funcnumber;	
++
++	u8	pcibridge_busnum;
++	u8	pcibridge_devnum;
++	u8	pcibridge_funcnum;
++	u8	pcibridge_vendor;
++	u16	pcibridge_vendorid;
++	u16	pcibridge_deviceid;
++	u8	pcibridge_pciehdr_offset;
++	u8	pcibridge_linkctrlreg;	
++
++	u8	amd_l1_patch;
++};
++
++typedef struct _RT_ISR_CONTENT
++{
++	union{
++		u32			IntArray[2];
++		u32			IntReg4Byte;
++		u16			IntReg2Byte;
++	};
++}RT_ISR_CONTENT, *PRT_ISR_CONTENT;
++
++//#define RegAddr(addr)           (addr + 0xB2000000UL)
++//some platform macros will def here
++static inline void NdisRawWritePortUlong(u32 port,  u32 val) 		
++{
++	outl(val, port);
++	//writel(val, (u8 *)RegAddr(port));	
++}
++
++static inline void NdisRawWritePortUchar(u32 port,  u8 val)
++{
++	outb(val, port);
++	//writeb(val, (u8 *)RegAddr(port));
++}
++
++static inline void NdisRawReadPortUchar(u32 port, u8 *pval)
++{
++	*pval = inb(port);
++	//*pval = readb((u8 *)RegAddr(port));
++}
++
++static inline void NdisRawReadPortUshort(u32 port, u16 *pval)
++{
++	*pval = inw(port);
++	//*pval = readw((u8 *)RegAddr(port));
++}
++
++static inline void NdisRawReadPortUlong(u32 port, u32 *pval)
++{
++	*pval = inl(port);
++	//*pval = readl((u8 *)RegAddr(port));
++}
++
++#ifdef CONFIG_RTL8192C
++void rtl8192ce_set_hal_ops(_adapter * padapter);
++#endif
++#ifdef CONFIG_RTL8192D
++void rtl8192de_set_hal_ops(_adapter * padapter);
++#endif
++
++#endif //__PCIE_HAL_H__
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/pci_ops.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/pci_ops.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/pci_ops.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/pci_ops.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,60 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __PCI_OPS_H_
++#define __PCI_OPS_H_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <osdep_intf.h>
++
++#ifdef CONFIG_RTL8192C
++u32	rtl8192ce_init_desc_ring(_adapter * padapter);
++u32	rtl8192ce_free_desc_ring(_adapter * padapter);
++void	rtl8192ce_reset_desc_ring(_adapter * padapter);
++#ifdef CONFIG_64BIT_DMA
++u8	PlatformEnable92CEDMA64(PADAPTER Adapter);
++#endif
++int	rtl8192ce_interrupt(PADAPTER Adapter);
++void	rtl8192ce_xmit_tasklet(void *priv);
++void	rtl8192ce_recv_tasklet(void *priv);
++void	rtl8192ce_prepare_bcn_tasklet(void *priv);
++void	rtl8192ce_set_intf_ops(struct _io_ops	*pops);
++#define pci_set_intf_ops	rtl8192ce_set_intf_ops
++#endif
++
++#ifdef CONFIG_RTL8192D
++u32	rtl8192de_init_desc_ring(_adapter * padapter);
++u32	rtl8192de_free_desc_ring(_adapter * padapter);
++void	rtl8192de_reset_desc_ring(_adapter * padapter);
++#ifdef CONFIG_64BIT_DMA
++u8	PlatformEnable92DEDMA64(PADAPTER Adapter);
++#endif
++int	rtl8192de_interrupt(PADAPTER Adapter);
++void	rtl8192de_xmit_tasklet(void *priv);
++void	rtl8192de_recv_tasklet(void *priv);
++void	rtl8192de_prepare_bcn_tasklet(void *priv);
++void	rtl8192de_set_intf_ops(struct _io_ops	*pops);
++#define pci_set_intf_ops	rtl8192de_set_intf_ops
++u32	MpReadPCIDwordDBI8192D(IN PADAPTER Adapter, IN u16 Offset, IN u8 Direct);
++void	MpWritePCIDwordDBI8192D(IN PADAPTER Adapter, IN u16 Offset, IN u32 Value, IN u8 Direct);
++#endif
++
++#endif
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/pci_osintf.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/pci_osintf.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/pci_osintf.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/pci_osintf.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,33 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __PCI_OSINTF_H
++#define __PCI_OSINTF_H
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++
++
++void rtw_pci_disable_aspm(_adapter *padapter);
++void rtw_pci_enable_aspm(_adapter *padapter);
++
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/recv_osdep.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/recv_osdep.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/recv_osdep.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/recv_osdep.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,58 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __RECV_OSDEP_H_
++#define __RECV_OSDEP_H_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++
++
++extern sint _rtw_init_recv_priv(struct recv_priv *precvpriv, _adapter *padapter);
++extern void _rtw_free_recv_priv (struct recv_priv *precvpriv);
++
++
++extern s32  rtw_recv_entry(union recv_frame *precv_frame);	
++extern int rtw_recv_indicatepkt(_adapter *adapter, union recv_frame *precv_frame);
++extern void rtw_recv_returnpacket(IN _nic_hdl cnxt, IN _pkt *preturnedpkt);
++
++extern void rtw_hostapd_mlme_rx(_adapter *padapter, union recv_frame *precv_frame);
++extern void rtw_handle_tkip_mic_err(_adapter *padapter,u8 bgroup);
++		
++
++int	rtw_init_recv_priv(struct recv_priv *precvpriv, _adapter *padapter);
++void rtw_free_recv_priv (struct recv_priv *precvpriv);
++
++
++int rtw_os_recv_resource_init(struct recv_priv *precvpriv, _adapter *padapter);
++int rtw_os_recv_resource_alloc(_adapter *padapter, union recv_frame *precvframe);
++void rtw_os_recv_resource_free(struct recv_priv *precvpriv);
++
++
++int rtw_os_recvbuf_resource_alloc(_adapter *padapter, struct recv_buf *precvbuf);
++int rtw_os_recvbuf_resource_free(_adapter *padapter, struct recv_buf *precvbuf);
++
++void rtw_os_read_port(_adapter *padapter, struct recv_buf *precvbuf);
++
++void rtw_init_recv_timer(struct recv_reorder_ctrl *preorder_ctrl);
++
++
++#endif //
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192c_cmd.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192c_cmd.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192c_cmd.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192c_cmd.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,153 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __RTL8192C_CMD_H_
++#define __RTL8192C_CMD_H_
++
++
++enum cmd_msg_element_id
++{	
++	NONE_CMDMSG_EID,
++	AP_OFFLOAD_EID=0,
++	SET_PWRMODE_EID=1,
++	JOINBSS_RPT_EID=2,
++	RSVD_PAGE_EID=3,
++	RSSI_4_EID = 4,
++	RSSI_SETTING_EID=5,
++	MACID_CONFIG_EID=6,
++	MACID_PS_MODE_EID=7,
++	P2P_PS_OFFLOAD_EID=8,
++	SELECTIVE_SUSPEND_ROF_CMD=9,
++#ifdef CONFIG_WOWLAN
++	H2C_WO_WLAN_CMD = 26,	// Wake on Wlan.
++	EXT_MACID_PERIOD_EID = 27,	// support macid to 64
++	MACID64_CONFIG_EID = 28,	// support macid to 64
++#endif // CONFIG_WOWLAN
++	P2P_PS_CTW_CMD_EID=32,
++	H2C_92C_IO_OFFLOAD=44,
++#ifdef CONFIG_WOWLAN
++	KEEP_ALIVE_CONTROL_CMD=48,
++	DISCONNECT_DECISION_CTRL_CMD=49,
++	REMOTE_WAKE_CTRL_CMD=60,
++#endif // CONFIG_WOWLAN
++	H2C_92C_TSF_SYNC=67,
++	H2C_92C_DISABLE_BCN_FUNC=68,
++	H2C_92C_RESET_TSF = 75,
++	H2C_92C_CMD_MAX
++};
++
++struct cmd_msg_parm {
++	u8 eid; //element id
++	u8 sz; // sz
++	u8 buf[6];
++};
++
++typedef struct _SETPWRMODE_PARM{
++	u8 	Mode;
++	u8 	SmartPS;
++	u8	BcnPassTime;	// unit: 100ms
++}SETPWRMODE_PARM, *PSETPWRMODE_PARM;
++
++#ifdef CONFIG_WOWLAN
++typedef struct _SETWOWLAN_PARM{
++	u8 	mode;
++	u8 	gpio_index;
++	u8	gpio_duration;	
++	u8  second_mode;
++	u8  reserve;
++}SETWOWLAN_PARM, *PSETWOWLAN_PARM;
++
++#define FW_WOWLAN_FUN_EN			BIT(0)
++#define FW_WOWLAN_PATTERN_MATCH		BIT(1)
++#define FW_WOWLAN_MAGIC_PKT			BIT(2)
++#define FW_WOWLAN_UNICAST			BIT(3)
++#define FW_WOWLAN_ALL_PKT_DROP		BIT(4)
++#define FW_WOWLAN_GPIO_ACTIVE		BIT(5)
++#define FW_WOWLAN_REKEY_WAKEUP		BIT(6)
++#define FW_WOWLAN_DEAUTH_WAKEUP		BIT(7)
++
++#define FW_WOWLAN_GPIO_WAKEUP_EN	BIT(0)
++#define FW_FW_PARSE_MAGIC_PKT		BIT(1)
++#endif // CONFIG_WOWLAN
++
++struct H2C_SS_RFOFF_PARAM{
++	u8 	ROFOn; // 1: on, 0:off
++	u16	gpio_period; // unit: 1024 us
++}__attribute__ ((packed));
++
++
++typedef struct JOINBSSRPT_PARM{
++	u8	OpMode;	// RT_MEDIA_STATUS
++}JOINBSSRPT_PARM, *PJOINBSSRPT_PARM;
++
++typedef struct _RSVDPAGE_LOC{
++	u8 	LocProbeRsp;
++	u8 	LocPsPoll;
++	u8	LocNullData;
++}RSVDPAGE_LOC, *PRSVDPAGE_LOC;
++
++struct P2P_PS_Offload_t {
++ unsigned char Offload_En:1;
++ unsigned char role:1; // 1: Owner, 0: Client
++ unsigned char CTWindow_En:1;
++ unsigned char NoA0_En:1;
++ unsigned char NoA1_En:1;
++ unsigned char AllStaSleep:1; // Only valid in Owner
++ unsigned char discovery:1;
++ unsigned char rsvd:1;
++};
++
++struct P2P_PS_CTWPeriod_t {
++    unsigned char CTWPeriod;	//TU
++};
++
++// host message to firmware cmd
++void	rtl8192c_set_FwPwrMode_cmd(_adapter*padapter, u8 Mode);
++void	rtl8192c_set_FwJoinBssReport_cmd(_adapter* padapter, u8 mstatus);
++u8	rtl8192c_set_rssi_cmd(_adapter*padapter, u8 *param);
++u8	rtl8192c_set_raid_cmd(_adapter*padapter, u32 mask, u8 arg);
++void	rtl8192c_Add_RateATid(PADAPTER pAdapter, u32 bitmap, u8 arg);
++u8	rtl8192c_set_FwSelectSuspend_cmd(_adapter*padapter,u8 bfwpoll, u16 period);
++#ifdef CONFIG_P2P
++void	rtl8192c_set_p2p_ps_offload_cmd(_adapter* padapter, u8 p2p_ps_state);
++#endif //CONFIG_P2P
++
++#ifdef CONFIG_IOL
++typedef struct _IO_OFFLOAD_LOC{
++	u8 	LocCmd;
++}IO_OFFLOAD_LOC, *PIO_OFFLOAD_LOC;
++int rtl8192c_IOL_exec_cmds_sync(ADAPTER *adapter, struct xmit_frame *xmit_frame, u32 max_wating_ms);
++#endif //CONFIG_IOL
++
++#ifdef CONFIG_BEACON_DISABLE_OFFLOAD
++u8 rtl8192c_dis_beacon_fun_cmd(_adapter* padapter);
++#endif  // CONFIG_BEACON_DISABLE_OFFLOAD
++
++
++#ifdef CONFIG_TSF_RESET_OFFLOAD
++int reset_tsf(PADAPTER Adapter, u8 reset_port );
++#endif	// CONFIG_TSF_RESET_OFFLOAD
++
++#ifdef CONFIG_WOWLAN
++void rtl8192c_set_wowlan_cmd(_adapter* padapter);
++void SetFwRelatedForWoWLAN8192CU(_adapter* 	padapter,u8 bHostIsGoingtoSleep);
++#endif // CONFIG_WOWLAN
++
++#endif	// __RTL8192C_CMD_H_
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192c_dm.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192c_dm.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192c_dm.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192c_dm.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,516 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef	__RTL8192C_DM_H__
++#define __RTL8192C_DM_H__
++//============================================================
++// Description:
++//
++// This file is for 92CE/92CU dynamic mechanism only
++//
++//
++//============================================================
++
++#define	RSSI_CCK		0
++#define	RSSI_OFDM		1
++#define	RSSI_DEFAULT	2
++
++//============================================================
++// structure and define
++//============================================================
++
++typedef struct _FALSE_ALARM_STATISTICS{
++	u32	Cnt_Parity_Fail;
++	u32	Cnt_Rate_Illegal;
++	u32	Cnt_Crc8_fail;
++	u32	Cnt_Mcs_fail;
++	u32	Cnt_Ofdm_fail;
++	u32	Cnt_Cck_fail;
++	u32	Cnt_all;
++	u32	Cnt_Fast_Fsync;
++	u32	Cnt_SB_Search_fail;
++}FALSE_ALARM_STATISTICS, *PFALSE_ALARM_STATISTICS;
++
++typedef struct _Dynamic_Power_Saving_
++{
++	u8		PreCCAState;
++	u8		CurCCAState;
++
++	u8		PreRFState;
++	u8		CurRFState;
++
++	s32		Rssi_val_min;
++	
++}PS_T;
++
++typedef struct _Dynamic_Initial_Gain_Threshold_
++{
++	u8		Dig_Enable_Flag;
++	u8		Dig_Ext_Port_Stage;
++
++	int		RssiLowThresh;
++	int		RssiHighThresh;
++
++	u32		FALowThresh;
++	u32		FAHighThresh;
++
++	u8		CurSTAConnectState;
++	u8		PreSTAConnectState;
++	u8		CurMultiSTAConnectState;
++
++	u8		PreIGValue;
++	u8		CurIGValue;
++	u8		BackupIGValue;
++
++	char		BackoffVal;
++	char		BackoffVal_range_max;
++	char		BackoffVal_range_min;
++	u8		rx_gain_range_max;
++	u8		rx_gain_range_min;
++	u8		Rssi_val_min;
++
++	u8		PreCCKPDState;
++	u8		CurCCKPDState;
++        u8		PreCCKFAState;
++	u8		CurCCKFAState;
++	u8		PreCCAState;
++	u8		CurCCAState;
++
++	u8		LargeFAHit;
++	u8		ForbiddenIGI;
++	u32		Recover_cnt;
++	u8		rx_gain_range_min_nolink;
++
++}DIG_T;
++
++typedef enum tag_Dynamic_Init_Gain_Operation_Type_Definition
++{
++	DIG_TYPE_THRESH_HIGH	= 0,
++	DIG_TYPE_THRESH_LOW	= 1,
++	DIG_TYPE_BACKOFF		= 2,
++	DIG_TYPE_RX_GAIN_MIN	= 3,
++	DIG_TYPE_RX_GAIN_MAX	= 4,
++	DIG_TYPE_ENABLE 		= 5,
++	DIG_TYPE_DISABLE 		= 6,
++	DIG_OP_TYPE_MAX
++}DM_DIG_OP_E;
++
++typedef enum tag_CCK_Packet_Detection_Threshold_Type_Definition
++{
++	CCK_PD_STAGE_LowRssi = 0,
++	CCK_PD_STAGE_HighRssi = 1,
++	CCK_PD_STAGE_MAX = 3,
++}DM_CCK_PDTH_E;
++
++typedef enum tag_1R_CCA_Type_Definition
++{
++	CCA_1R =0,
++	CCA_2R = 1,
++	CCA_MAX = 2,
++}DM_1R_CCA_E;
++
++typedef enum tag_RF_Type_Definition
++{
++	RF_Save =0,
++	RF_Normal = 1,
++	RF_MAX = 2,
++}DM_RF_E;
++
++typedef enum tag_DIG_EXT_PORT_ALGO_Definition
++{
++	DIG_EXT_PORT_STAGE_0 = 0,
++	DIG_EXT_PORT_STAGE_1 = 1,
++	DIG_EXT_PORT_STAGE_2 = 2,
++	DIG_EXT_PORT_STAGE_3 = 3,
++	DIG_EXT_PORT_STAGE_MAX = 4,
++}DM_DIG_EXT_PORT_ALG_E;
++
++
++typedef enum tag_DIG_Connect_Definition
++{
++	DIG_STA_DISCONNECT = 0,	
++	DIG_STA_CONNECT = 1,
++	DIG_STA_BEFORE_CONNECT = 2,
++	DIG_MultiSTA_DISCONNECT = 3,
++	DIG_MultiSTA_CONNECT = 4,
++	DIG_CONNECT_MAX
++}DM_DIG_CONNECT_E;
++
++
++
++typedef	enum _BT_Ant_NUM{
++	Ant_x2	= 0,		
++	Ant_x1	= 1
++} BT_Ant_NUM, *PBT_Ant_NUM;
++
++typedef	enum _BT_CoType{
++	BT_2Wire		= 0,		
++	BT_ISSC_3Wire	= 1,
++	BT_Accel		= 2,
++	BT_CSR_BC4		= 3,
++	BT_CSR_BC8		= 4,
++	BT_RTL8756		= 5,
++} BT_CoType, *PBT_CoType;
++
++typedef	enum _BT_CurState{
++	BT_OFF		= 0,	
++	BT_ON		= 1,
++} BT_CurState, *PBT_CurState;
++
++typedef	enum _BT_ServiceType{
++	BT_SCO		= 0,	
++	BT_A2DP		= 1,
++	BT_HID		= 2,
++	BT_HID_Idle	= 3,
++	BT_Scan		= 4,
++	BT_Idle		= 5,
++	BT_OtherAction	= 6,
++	BT_Busy			= 7,
++	BT_OtherBusy		= 8,
++	BT_PAN			= 9,
++} BT_ServiceType, *PBT_ServiceType;
++
++typedef	enum _BT_RadioShared{
++	BT_Radio_Shared 	= 0,	
++	BT_Radio_Individual	= 1,
++} BT_RadioShared, *PBT_RadioShared;
++
++struct btcoexist_priv	{
++	u8					BT_Coexist;
++	u8					BT_Ant_Num;
++	u8					BT_CoexistType;
++	u8					BT_State;
++	u8					BT_CUR_State;		//0:on, 1:off
++	u8					BT_Ant_isolation;	//0:good, 1:bad
++	u8					BT_PapeCtrl;		//0:SW, 1:SW/HW dynamic
++	u8					BT_Service;
++	u8					BT_Ampdu;	// 0:Disable BT control A-MPDU, 1:Enable BT control A-MPDU.
++	u8					BT_RadioSharedType;
++	u32					Ratio_Tx;
++	u32					Ratio_PRI;
++	u8					BtRfRegOrigin1E;
++	u8					BtRfRegOrigin1F;
++	u8					BtRssiState;
++	u32					BtEdcaUL;
++	u32					BtEdcaDL;
++	u32					BT_EDCA[2];
++	u8					bCOBT;
++
++	u8					bInitSet;
++	u8					bBTBusyTraffic;
++	u8					bBTTrafficModeSet;
++	u8					bBTNonTrafficModeSet;
++	//BTTraffic				BT21TrafficStatistics;
++	u32					CurrentState;
++	u32					PreviousState;
++	u8					BtPreRssiState;
++	u8					bFWCoexistAllOff;
++	u8					bSWCoexistAllOff;
++};
++
++#define		BW_AUTO_SWITCH_HIGH_LOW	25
++#define		BW_AUTO_SWITCH_LOW_HIGH	30
++
++#define		DM_DIG_THRESH_HIGH			40
++#define		DM_DIG_THRESH_LOW			35
++
++#define		DM_FALSEALARM_THRESH_LOW	400
++#define		DM_FALSEALARM_THRESH_HIGH	1000
++
++#define		DM_DIG_MAX					0x3e
++#define		DM_DIG_MIN					0x1e //0x22//0x1c
++
++#define		DM_DIG_FA_UPPER				0x3e
++#define		DM_DIG_FA_LOWER				0x20
++#define		DM_DIG_FA_TH0					0x20
++#define		DM_DIG_FA_TH1					0x100
++#define		DM_DIG_FA_TH2					0x200
++
++#define		DM_DIG_BACKOFF_MAX			12
++#define		DM_DIG_BACKOFF_MIN			(-4)
++#define		DM_DIG_BACKOFF_DEFAULT		10
++
++#define		RxPathSelection_SS_TH_low		30
++#define		RxPathSelection_diff_TH			18
++
++#define		DM_RATR_STA_INIT			0
++#define		DM_RATR_STA_HIGH			1
++#define 		DM_RATR_STA_MIDDLE		2
++#define 		DM_RATR_STA_LOW			3
++
++#define		CTSToSelfTHVal					30
++#define		RegC38_TH						20
++
++#define		WAIotTHVal						25
++
++//Dynamic Tx Power Control Threshold
++#define		TX_POWER_NEAR_FIELD_THRESH_LVL2	74
++#define		TX_POWER_NEAR_FIELD_THRESH_LVL1	67
++
++#define		TxHighPwrLevel_Normal		0	
++#define		TxHighPwrLevel_Level1		1
++#define		TxHighPwrLevel_Level2		2
++#define		TxHighPwrLevel_BT1			3
++#define		TxHighPwrLevel_BT2			4
++#define		TxHighPwrLevel_15			5
++#define		TxHighPwrLevel_35			6
++#define		TxHighPwrLevel_50			7
++#define		TxHighPwrLevel_70			8
++#define		TxHighPwrLevel_100			9
++
++#define		DM_Type_ByFW			0
++#define		DM_Type_ByDriver		1
++
++
++typedef struct _RATE_ADAPTIVE
++{
++	u8				RateAdaptiveDisabled;
++	u8				RATRState;
++	u16				reserve;	
++	
++	u32				HighRSSIThreshForRA;
++	u32				High2LowRSSIThreshForRA;
++	u8				Low2HighRSSIThreshForRA40M;
++	u32				LowRSSIThreshForRA40M;	
++	u8				Low2HighRSSIThreshForRA20M;
++	u32				LowRSSIThreshForRA20M;	
++	u32				UpperRSSIThresholdRATR;
++	u32				MiddleRSSIThresholdRATR;
++	u32				LowRSSIThresholdRATR;
++	u32				LowRSSIThresholdRATR40M;
++	u32				LowRSSIThresholdRATR20M;
++	u8				PingRSSIEnable;	//cosa add for Netcore long range ping issue
++	u32				PingRSSIRATR;	//cosa add for Netcore long range ping issue
++	u32				PingRSSIThreshForRA;//cosa add for Netcore long range ping issue
++	u32				LastRATR;
++	u8				PreRATRState;
++	
++} RATE_ADAPTIVE, *PRATE_ADAPTIVE;
++
++typedef enum tag_SW_Antenna_Switch_Definition
++{
++	Antenna_B = 1,
++	Antenna_A = 2,
++	Antenna_MAX = 3,
++}DM_SWAS_E;
++
++#ifdef CONFIG_ANTENNA_DIVERSITY
++// This indicates two different the steps. 
++// In SWAW_STEP_PEAK, driver needs to switch antenna and listen to the signal on the air.
++// In SWAW_STEP_DETERMINE, driver just compares the signal captured in SWAW_STEP_PEAK
++// with original RSSI to determine if it is necessary to switch antenna.
++#define SWAW_STEP_PEAK		0
++#define SWAW_STEP_DETERMINE	1
++
++#define	TP_MODE		0
++#define	RSSI_MODE		1
++#define	TRAFFIC_LOW	0
++#define	TRAFFIC_HIGH	1
++
++typedef struct _SW_Antenna_Switch_
++{
++	u8		try_flag;
++	s32		PreRSSI;
++	u8		CurAntenna;
++	u8		PreAntenna;
++	u8		RSSI_Trying;
++	u8		TestMode;
++	u8		bTriggerAntennaSwitch;
++	u8		SelectAntennaMap;
++	// Before link Antenna Switch check
++	u8		SWAS_NoLink_State;
++
++}SWAT_T;
++
++
++#endif
++
++
++struct 	dm_priv	
++{
++	u8	DM_Type;
++	u8	DMFlag, DMFlag_tmp;
++	
++
++	//for DIG
++	u8	bDMInitialGainEnable;
++	u8	binitialized; // for dm_initial_gain_Multi_STA use.
++	DIG_T	DM_DigTable;
++
++	PS_T	DM_PSTable;
++
++	FALSE_ALARM_STATISTICS FalseAlmCnt;
++	
++	//for rate adaptive, in fact,  88c/92c fw will handle this
++	u8 bUseRAMask;
++	RATE_ADAPTIVE RateAdaptive;
++
++	//* Upper and Lower Signal threshold for Rate Adaptive*/
++	int	UndecoratedSmoothedPWDB;
++	int	UndecoratedSmoothedCCK;
++	int	EntryMinUndecoratedSmoothedPWDB;
++	int	EntryMaxUndecoratedSmoothedPWDB;
++
++
++	//for High Power
++	u8 bDynamicTxPowerEnable;
++	u8 LastDTPLvl;
++	u8 DynamicTxHighPowerLvl;//Add by Jacken Tx Power Control for Near/Far Range 2008/03/06
++		
++	//for tx power tracking
++	//u8	bTXPowerTracking;
++	u8	TXPowercount;
++	u8	bTXPowerTrackingInit;	
++	u8	TxPowerTrackControl;	//for mp mode, turn off txpwrtracking as default
++	u8	TM_Trigger;
++
++	u8	ThermalMeter[2];				// ThermalMeter, index 0 for RFIC0, and 1 for RFIC1
++	u8	ThermalValue;
++	u8	ThermalValue_LCK;
++	u8	ThermalValue_IQK;
++	u8	ThermalValue_DPK;
++
++	u8	bRfPiEnable;
++
++	//for APK
++	u32	APKoutput[2][2];	//path A/B; output1_1a/output1_2a
++	u8	bAPKdone;
++	u8	bAPKThermalMeterIgnore;
++	u8	bDPdone;
++	u8	bDPPathAOK;
++	u8	bDPPathBOK;
++
++	//for IQK
++	u32	RegC04;
++	u32	Reg874;
++	u32	RegC08;
++	u32	RegB68;
++	u32	RegB6C;
++	u32	Reg870;
++	u32	Reg860;
++	u32	Reg864;
++	u32	ADDA_backup[IQK_ADDA_REG_NUM];
++	u32	IQK_MAC_backup[IQK_MAC_REG_NUM];
++	u32	IQK_BB_backup_recover[9];
++	u32	IQK_BB_backup[IQK_BB_REG_NUM];
++	u8	PowerIndex_backup[6];
++
++	u8	bCCKinCH14;
++
++	char	CCK_index;
++	char	OFDM_index[2];
++
++	BOOLEAN		bDoneTxpower;
++	char	CCK_index_HP;
++	char	OFDM_index_HP[2];
++	u8	ThermalValue_HP[HP_THERMAL_NUM];
++	u8	ThermalValue_HP_index;
++
++	//for TxPwrTracking
++	int	RegE94;
++	int 	RegE9C;
++	int	RegEB4;
++	int	RegEBC;
++
++	u32	TXPowerTrackingCallbackCnt;	//cosa add for debug
++
++	u32	prv_traffic_idx; // edca turbo
++
++	// for dm_RF_Saving
++	u8	initialize;
++	u32	rf_saving_Reg874;
++	u32	rf_saving_RegC70;
++	u32	rf_saving_Reg85C;
++	u32	rf_saving_RegA74;
++
++	//for Antenna diversity
++#ifdef CONFIG_ANTENNA_DIVERSITY
++	SWAT_T DM_SWAT_Table;
++#endif	
++#ifdef CONFIG_SW_ANTENNA_DIVERSITY
++	_timer SwAntennaSwitchTimer;
++	
++	u64	lastTxOkCnt;
++	u64	lastRxOkCnt;
++	u64	TXByteCnt_A;
++	u64	TXByteCnt_B;
++	u64	RXByteCnt_A;
++	u64	RXByteCnt_B;
++	u8	DoubleComfirm;
++	u8	TrafficLoad;
++#endif
++
++	s32	OFDM_Pkt_Cnt;
++	u8	RSSI_Select;
++	u8 	DIG_Dynamic_MIN ;
++
++	// Add for Reading Initial Data Rate SEL Register 0x484 during watchdog. Using for fill tx desc. 2011.3.21 by Thomas
++	u8	INIDATA_RATE[32];
++
++#ifdef CONFIG_DM_ADAPTIVITY
++	/* Ported from ODM, for ESTI Adaptivity test */
++	s8 TH_L2H_ini;
++	s8 TH_EDCCA_HL_diff;
++	s8 IGI_Base;
++	u8 IGI_target;
++	bool ForceEDCCA;
++	u8 AdapEn_RSSI;
++	s8 Force_TH_H;
++	s8 Force_TH_L;
++	u8 IGI_LowerBound;
++
++	bool	bPreEdccaEnable;
++#endif
++};
++
++
++/*------------------------Export global variable----------------------------*/
++/*------------------------Export global variable----------------------------*/
++/*------------------------Export Marco Definition---------------------------*/
++//#define DM_MultiSTA_InitGainChangeNotify(Event) {DM_DigTable.CurMultiSTAConnectState = Event;}
++
++
++//============================================================
++// function prototype
++//============================================================
++void rtl8192c_init_dm_priv(IN PADAPTER Adapter);
++void rtl8192c_deinit_dm_priv(IN PADAPTER Adapter);
++void rtl8192c_InitHalDm(IN PADAPTER Adapter);
++void rtl8192c_HalDmWatchDog(IN PADAPTER Adapter);
++
++VOID rtl8192c_dm_CheckTXPowerTracking(IN PADAPTER Adapter);
++
++void rtl8192c_dm_RF_Saving(IN PADAPTER pAdapter, IN u8 bForceInNormal);
++
++#ifdef CONFIG_BT_COEXIST
++void rtl8192c_set_dm_bt_coexist(_adapter *padapter, u8 bStart);
++void rtl8192c_issue_delete_ba(_adapter *padapter, u8 dir);
++#endif
++
++#ifdef CONFIG_SW_ANTENNA_DIVERSITY
++void SwAntDivRSSICheck8192C(_adapter *padapter ,u32 RxPWDBAll); 
++void SwAntDivRestAfterLink8192C(IN	PADAPTER Adapter);
++#endif
++#ifdef CONFIG_ANTENNA_DIVERSITY
++void	SwAntDivCompare8192C(PADAPTER Adapter, WLAN_BSSID_EX *dst, WLAN_BSSID_EX *src);
++u8 SwAntDivBeforeLink8192C(IN PADAPTER Adapter);
++#endif
++
++#endif	//__HAL8190PCIDM_H__
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192c_event.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192c_event.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192c_event.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192c_event.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,28 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef _RTL8192C_EVENT_H_
++#define _RTL8192C_EVENT_H_
++
++
++
++
++#endif
++
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192c_hal.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192c_hal.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192c_hal.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192c_hal.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,937 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __RTL8192C_HAL_H__
++#define __RTL8192C_HAL_H__
++
++#include "hal_com.h"
++#include "rtl8192c_spec.h"
++#include "Hal8192CPhyReg.h"
++#include "Hal8192CPhyCfg.h"
++#include "rtl8192c_rf.h"
++#include "rtl8192c_dm.h"
++#include "rtl8192c_recv.h"
++#include "rtl8192c_xmit.h"
++#include "rtl8192c_cmd.h"
++#ifdef DBG_CONFIG_ERROR_DETECT
++#include "rtl8192c_sreset.h"
++#endif
++
++#ifdef CONFIG_PCI_HCI
++
++	#include "Hal8192CEHWImg.h"
++
++	#define RTL819X_DEFAULT_RF_TYPE			RF_2T2R
++	//#define RTL819X_DEFAULT_RF_TYPE			RF_1T2R
++	#define RTL819X_TOTAL_RF_PATH				2
++
++	//2TODO:  The following need to check!!
++	#define RTL8192C_FW_TSMC_IMG				"rtl8192CE\\rtl8192cfwT.bin"
++	#define RTL8192C_FW_UMC_IMG				"rtl8192CE\\rtl8192cfwU.bin"
++	#define RTL8192C_FW_UMC_B_IMG				"rtl8192CE\\rtl8192cfwU_B.bin"
++
++	#define RTL8188C_PHY_REG					"rtl8192CE\\PHY_REG_1T.txt"
++	#define RTL8188C_PHY_RADIO_A				"rtl8192CE\\radio_a_1T.txt"
++	#define RTL8188C_PHY_RADIO_B				"rtl8192CE\\radio_b_1T.txt"
++	#define RTL8188C_AGC_TAB					"rtl8192CE\\AGC_TAB_1T.txt"
++	#define RTL8188C_PHY_MACREG				"rtl8192CE\\MACREG_1T.txt"
++
++	#define RTL8192C_PHY_REG					"rtl8192CE\\PHY_REG_2T.txt"
++	#define RTL8192C_PHY_RADIO_A				"rtl8192CE\\radio_a_2T.txt"
++	#define RTL8192C_PHY_RADIO_B				"rtl8192CE\\radio_b_2T.txt"
++	#define RTL8192C_AGC_TAB					"rtl8192CE\\AGC_TAB_2T.txt"
++	#define RTL8192C_PHY_MACREG				"rtl8192CE\\MACREG_2T.txt"
++
++	#define RTL819X_PHY_MACPHY_REG			"rtl8192CE\\MACPHY_reg.txt"
++	#define RTL819X_PHY_MACPHY_REG_PG		"rtl8192CE\\MACPHY_reg_PG.txt"
++	#define RTL819X_PHY_MACREG				"rtl8192CE\\MAC_REG.txt"
++	#define RTL819X_PHY_REG					"rtl8192CE\\PHY_REG.txt"
++	#define RTL819X_PHY_REG_1T2R				"rtl8192CE\\PHY_REG_1T2R.txt"
++	#define RTL819X_PHY_REG_to1T1R				"rtl8192CE\\phy_to1T1R_a.txt"
++	#define RTL819X_PHY_REG_to1T2R				"rtl8192CE\\phy_to1T2R.txt"
++	#define RTL819X_PHY_REG_to2T2R				"rtl8192CE\\phy_to2T2R.txt"
++	#define RTL819X_PHY_REG_PG					"rtl8192CE\\PHY_REG_PG.txt"
++	#define RTL819X_AGC_TAB					"rtl8192CE\\AGC_TAB.txt"
++	#define RTL819X_PHY_RADIO_A				"rtl8192CE\\radio_a.txt"
++	#define RTL819X_PHY_RADIO_A_1T			"rtl8192CE\\radio_a_1t.txt"
++	#define RTL819X_PHY_RADIO_A_2T			"rtl8192CE\\radio_a_2t.txt"
++	#define RTL819X_PHY_RADIO_B				"rtl8192CE\\radio_b.txt"
++	#define RTL819X_PHY_RADIO_B_GM			"rtl8192CE\\radio_b_gm.txt"
++	#define RTL819X_PHY_RADIO_C				"rtl8192CE\\radio_c.txt"
++	#define RTL819X_PHY_RADIO_D				"rtl8192CE\\radio_d.txt"
++	#define RTL819X_EEPROM_MAP				"rtl8192CE\\8192ce.map"
++	#define RTL819X_EFUSE_MAP					"rtl8192CE\\8192ce.map"
++
++//---------------------------------------------------------------------
++//		RTL8723E From file
++//---------------------------------------------------------------------
++	#define RTL8723_FW_UMC_IMG				"rtl8723E\\rtl8723fw.bin"
++	#define RTL8723_PHY_REG					"rtl8723E\\PHY_REG_1T.txt" 
++	#define RTL8723_PHY_RADIO_A				"rtl8723E\\radio_a_1T.txt"
++	#define RTL8723_PHY_RADIO_B				"rtl8723E\\radio_b_1T.txt" 
++	#define RTL8723_AGC_TAB					"rtl8723E\\AGC_TAB_1T.txt"
++	#define RTL8723_PHY_MACREG 				"rtl8723E\\MAC_REG.txt"
++	#define RTL8723_PHY_MACREG 				"rtl8723E\\MAC_REG.txt"
++	#define RTL8723_PHY_REG_PG					"rtl8723E\\PHY_REG_PG.txt"
++	#define RTL8723_PHY_REG_MP 				"rtl8723E\\PHY_REG_MP.txt" 	
++
++	// The file name "_2T" is for 92CE, "_1T"  is for 88CE. Modified by tynli. 2009.11.24.
++	#define Rtl819XFwTSMCImageArray			Rtl8192CEFwTSMCImgArray
++	#define Rtl819XFwUMCACutImageArray			Rtl8192CEFwUMCACutImgArray
++	#define Rtl819XFwUMCBCutImageArray			Rtl8192CEFwUMCBCutImgArray
++	
++	#define Rtl8723FwUMCImageArray				Rtl8192CEFwUMC8723ImgArray
++	#define Rtl819XMAC_Array					Rtl8192CEMAC_2T_Array
++	#define Rtl819XAGCTAB_2TArray				Rtl8192CEAGCTAB_2TArray
++	#define Rtl819XAGCTAB_1TArray				Rtl8192CEAGCTAB_1TArray
++	#define Rtl819XPHY_REG_2TArray				Rtl8192CEPHY_REG_2TArray
++	#define Rtl819XPHY_REG_1TArray				Rtl8192CEPHY_REG_1TArray
++	#define Rtl819XRadioA_2TArray				Rtl8192CERadioA_2TArray
++	#define Rtl819XRadioA_1TArray				Rtl8192CERadioA_1TArray
++	#define Rtl819XRadioB_2TArray				Rtl8192CERadioB_2TArray
++	#define Rtl819XRadioB_1TArray				Rtl8192CERadioB_1TArray
++	#define Rtl819XPHY_REG_Array_PG 			Rtl8192CEPHY_REG_Array_PG
++	#define Rtl819XPHY_REG_Array_MP 			Rtl8192CEPHY_REG_Array_MP
++
++#elif defined(CONFIG_USB_HCI)
++
++	#include "Hal8192CUHWImg.h"
++#ifdef CONFIG_WOWLAN
++	#include "Hal8192CUHWImg_wowlan.h"
++#endif //CONFIG_WOWLAN
++	//2TODO: We should define 8192S firmware related macro settings here!!
++	#define RTL819X_DEFAULT_RF_TYPE			RF_1T2R
++	#define RTL819X_TOTAL_RF_PATH				2
++
++	//TODO:  The following need to check!!
++	#define RTL8192C_FW_TSMC_IMG				"rtl8192CU\\rtl8192cfwT.bin"
++	#define RTL8192C_FW_UMC_IMG				"rtl8192CU\\rtl8192cfwU.bin"
++	#define RTL8192C_FW_UMC_B_IMG				"rtl8192CU\\rtl8192cfwU_B.bin"
++#ifdef CONFIG_WOWLAN
++	#define 	RTL8192C_FW_TSMC_WW_IMG			"rtl8192CU\\rtl8192cfwTww.bin"
++	#define 	RTL8192C_FW_UMC_WW_IMG			"rtl8192CU\\rtl8192cfwUww.bin"
++	#define 	RTL8192C_FW_UMC_B_WW_IMG		"rtl8192CU\\rtl8192cfwU_Bww.bin"
++#endif // CONFIG_WOWLAN
++	//#define RTL819X_FW_BOOT_IMG   				"rtl8192CU\\boot.img"
++	//#define RTL819X_FW_MAIN_IMG				"rtl8192CU\\main.img"
++	//#define RTL819X_FW_DATA_IMG				"rtl8192CU\\data.img"
++
++	#define RTL8188C_PHY_REG					"rtl8188CU\\PHY_REG.txt"
++	#define RTL8188C_PHY_RADIO_A				"rtl8188CU\\radio_a.txt"
++	#define RTL8188C_PHY_RADIO_B				"rtl8188CU\\radio_b.txt"
++	#define RTL8188C_PHY_RADIO_A_mCard		"rtl8192CU\\radio_a_1T_mCard.txt"
++	#define RTL8188C_PHY_RADIO_B_mCard		"rtl8192CU\\radio_b_1T_mCard.txt" 
++	#define RTL8188C_PHY_RADIO_A_HP			"rtl8192CU\\radio_a_1T_HP.txt"
++	#define RTL8188C_AGC_TAB					"rtl8188CU\\AGC_TAB.txt"
++	#define RTL8188C_PHY_MACREG				"rtl8188CU\\MACREG.txt"
++
++	#define RTL8192C_PHY_REG					"rtl8192CU\\PHY_REG.txt"
++	#define RTL8192C_PHY_RADIO_A				"rtl8192CU\\radio_a.txt"
++	#define RTL8192C_PHY_RADIO_B				"rtl8192CU\\radio_b.txt"
++	#define RTL8192C_AGC_TAB					"rtl8192CU\\AGC_TAB.txt"
++	#define RTL8192C_PHY_MACREG				"rtl8192CU\\MACREG.txt"
++
++	#define RTL819X_PHY_REG_PG					"rtl8192CU\\PHY_REG_PG.txt"
++
++//---------------------------------------------------------------------
++//		RTL8723U From file
++//---------------------------------------------------------------------
++	#define RTL8723_FW_UMC_IMG				"rtl8723U\\rtl8723fw.bin"
++	#define RTL8723_PHY_REG					"rtl8723U\\PHY_REG_1T.txt" 
++	#define RTL8723_PHY_RADIO_A				"rtl8723U\\radio_a_1T.txt"
++	#define RTL8723_PHY_RADIO_B				"rtl8723U\\radio_b_1T.txt" 
++	#define RTL8723_AGC_TAB					"rtl8723U\\AGC_TAB_1T.txt"
++	#define RTL8723_PHY_MACREG 				"rtl8723U\\MAC_REG.txt"
++	#define RTL8723_PHY_MACREG 				"rtl8723U\\MAC_REG.txt"
++	#define RTL8723_PHY_REG_PG					"rtl8723U\\PHY_REG_PG.txt"
++	#define RTL8723_PHY_REG_MP					"rtl8723U\\PHY_REG_MP.txt"	
++
++	// The file name "_2T" is for 92CU, "_1T"  is for 88CU. Modified by tynli. 2009.11.24.
++	#define Rtl819XFwImageArray					Rtl8192CUFwTSMCImgArray
++	#define Rtl819XFwTSMCImageArray			Rtl8192CUFwTSMCImgArray
++	#define Rtl819XFwUMCACutImageArray			Rtl8192CUFwUMCACutImgArray
++	#define Rtl819XFwUMCBCutImageArray			Rtl8192CUFwUMCBCutImgArray
++#ifdef CONFIG_WOWLAN
++	#define Rtl8192C_FwTSMCWWImageArray		Rtl8192CUFwTSMCWWImgArray
++	#define Rtl8192C_FwUMCWWImageArray		Rtl8192CUFwUMCACutWWImgArray
++	#define Rtl8192C_FwUMCBCutWWImageArray	Rtl8192CUFwUMCBCutWWImgArray		
++#endif //CONFIG_WOWLAN
++	#define Rtl819XMAC_Array					Rtl8192CUMAC_2T_Array
++	#define Rtl819XAGCTAB_2TArray				Rtl8192CUAGCTAB_2TArray
++	#define Rtl819XAGCTAB_1TArray				Rtl8192CUAGCTAB_1TArray
++	#define Rtl819XAGCTAB_1T_HPArray			Rtl8192CUAGCTAB_1T_HPArray
++	#define Rtl819XPHY_REG_2TArray				Rtl8192CUPHY_REG_2TArray
++	#define Rtl819XPHY_REG_1TArray				Rtl8192CUPHY_REG_1TArray
++	#define Rtl819XPHY_REG_1T_mCardArray		Rtl8192CUPHY_REG_1T_mCardArray 					
++	#define Rtl819XPHY_REG_2T_mCardArray		Rtl8192CUPHY_REG_2T_mCardArray	
++	#define Rtl819XPHY_REG_1T_HPArray			Rtl8192CUPHY_REG_1T_HPArray
++	#define Rtl819XRadioA_2TArray				Rtl8192CURadioA_2TArray
++	#define Rtl819XRadioA_1TArray				Rtl8192CURadioA_1TArray
++	#define Rtl819XRadioA_1T_mCardArray		Rtl8192CURadioA_1T_mCardArray			
++	#define Rtl819XRadioB_2TArray				Rtl8192CURadioB_2TArray
++	#define Rtl819XRadioB_1TArray				Rtl8192CURadioB_1TArray	
++	#define Rtl819XRadioB_1T_mCardArray		Rtl8192CURadioB_1T_mCardArray
++	#define Rtl819XRadioA_1T_HPArray			Rtl8192CURadioA_1T_HPArray	
++	#define Rtl819XPHY_REG_Array_PG 			Rtl8192CUPHY_REG_Array_PG
++	#define Rtl819XPHY_REG_Array_PG_mCard 		Rtl8192CUPHY_REG_Array_PG_mCard			
++	#define Rtl819XPHY_REG_Array_PG_HP			Rtl8192CUPHY_REG_Array_PG_HP
++	#define Rtl819XPHY_REG_Array_MP 			Rtl8192CUPHY_REG_Array_MP
++#endif
++
++#define DRVINFO_SZ	4 // unit is 8bytes
++#define PageNum_128(_Len)		(u32)(((_Len)>>7) + ((_Len)&0x7F ? 1:0))
++
++#define FW_8192C_SIZE					16384+32//16k
++#define FW_8192C_START_ADDRESS		0x1000
++//#define FW_8192C_END_ADDRESS		0x3FFF //Filen said this is for test chip
++#define FW_8192C_END_ADDRESS		0x1FFF
++
++#define MAX_PAGE_SIZE			4096	// @ page : 4k bytes
++
++#define IS_FW_HEADER_EXIST(_pFwHdr)	((le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x92C0 ||\
++									(le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x88C0 ||\
++									(le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x2300)
++
++typedef enum _FIRMWARE_SOURCE{
++	FW_SOURCE_IMG_FILE = 0,
++	FW_SOURCE_HEADER_FILE = 1,		//from header file
++}FIRMWARE_SOURCE, *PFIRMWARE_SOURCE;
++
++typedef struct _RT_FIRMWARE{
++	FIRMWARE_SOURCE	eFWSource;
++	u8*			szFwBuffer;
++	u32			ulFwLength;
++#ifdef CONFIG_WOWLAN
++	u8*			szWoWLANFwBuffer;
++	u32			ulWoWLANFwLength;
++#endif //CONFIG_WOWLAN
++}RT_FIRMWARE, *PRT_FIRMWARE, RT_FIRMWARE_92C, *PRT_FIRMWARE_92C;
++
++//
++// This structure must be cared byte-ordering
++//
++// Added by tynli. 2009.12.04.
++typedef struct _RT_8192C_FIRMWARE_HDR {//8-byte alinment required
++
++	//--- LONG WORD 0 ----
++	u16		Signature;	// 92C0: test chip; 92C, 88C0: test chip; 88C1: MP A-cut; 92C1: MP A-cut
++	u8		Category;	// AP/NIC and USB/PCI
++	u8		Function;	// Reserved for different FW function indcation, for further use when driver needs to download different FW in different conditions
++	u16		Version;		// FW Version
++	u8		Subversion;	// FW Subversion, default 0x00
++	u16		Rsvd1;
++
++
++	//--- LONG WORD 1 ----
++	u8		Month;	// Release time Month field
++	u8		Date;	// Release time Date field
++	u8		Hour;	// Release time Hour field
++	u8		Minute;	// Release time Minute field
++	u16		RamCodeSize;	// The size of RAM code
++	u16		Rsvd2;
++
++	//--- LONG WORD 2 ----
++	u32		SvnIdx;	// The SVN entry index
++	u32		Rsvd3;
++
++	//--- LONG WORD 3 ----
++	u32		Rsvd4;
++	u32		Rsvd5;
++
++}RT_8192C_FIRMWARE_HDR, *PRT_8192C_FIRMWARE_HDR;
++
++#define DRIVER_EARLY_INT_TIME		0x05
++#define BCN_DMA_ATIME_INT_TIME		0x02
++
++#ifdef CONFIG_USB_RX_AGGREGATION
++
++typedef enum _USB_RX_AGG_MODE{
++	USB_RX_AGG_DISABLE,
++	USB_RX_AGG_DMA,
++	USB_RX_AGG_USB,
++	USB_RX_AGG_MIX
++}USB_RX_AGG_MODE;
++
++#define MAX_RX_DMA_BUFFER_SIZE	10240		// 10K for 8192C RX DMA buffer
++
++#endif
++
++
++#define TX_SELE_HQ			BIT(0)		// High Queue
++#define TX_SELE_LQ			BIT(1)		// Low Queue
++#define TX_SELE_NQ			BIT(2)		// Normal Queue
++
++
++// Note: We will divide number of page equally for each queue other than public queue!
++
++#define TX_TOTAL_PAGE_NUMBER		0xF8
++#define TX_PAGE_BOUNDARY		(TX_TOTAL_PAGE_NUMBER + 1)
++
++// For Normal Chip Setting
++// (HPQ + LPQ + NPQ + PUBQ) shall be TX_TOTAL_PAGE_NUMBER
++#define NORMAL_PAGE_NUM_PUBQ			0xE7
++#define NORMAL_PAGE_NUM_HPQ			0x0C
++#define NORMAL_PAGE_NUM_LPQ			0x02
++#define NORMAL_PAGE_NUM_NPQ			0x02
++
++
++// For Test Chip Setting
++// (HPQ + LPQ + PUBQ) shall be TX_TOTAL_PAGE_NUMBER
++#define TEST_PAGE_NUM_PUBQ		0x7E
++
++
++// For Test Chip Setting
++#define WMM_TEST_TX_TOTAL_PAGE_NUMBER	0xF5
++#define WMM_TEST_TX_PAGE_BOUNDARY	(WMM_TEST_TX_TOTAL_PAGE_NUMBER + 1) //F6
++
++#define WMM_TEST_PAGE_NUM_PUBQ		0xA3
++#define WMM_TEST_PAGE_NUM_HPQ		0x29
++#define WMM_TEST_PAGE_NUM_LPQ		0x29
++
++
++//Note: For Normal Chip Setting ,modify later
++#define WMM_NORMAL_TX_TOTAL_PAGE_NUMBER	0xF5
++#define WMM_NORMAL_TX_PAGE_BOUNDARY	(WMM_TEST_TX_TOTAL_PAGE_NUMBER + 1) //F6
++
++#define WMM_NORMAL_PAGE_NUM_PUBQ		0x65
++#define WMM_NORMAL_PAGE_NUM_HPQ		0x30
++#define WMM_NORMAL_PAGE_NUM_LPQ			0x30
++#define WMM_NORMAL_PAGE_NUM_NPQ		0x30
++
++//-------------------------------------------------------------------------
++//	Chip specific
++//-------------------------------------------------------------------------
++#define CHIP_BONDING_IDENTIFIER(_value)	(((_value)>>22)&0x3)
++#define CHIP_BONDING_92C_1T2R	0x1
++#define CHIP_BONDING_88C_USB_MCARD	0x2
++#define CHIP_BONDING_88C_USB_HP	0x1
++
++//
++// 2011.01.06. Define new structure of chip version for RTL8723 and so on. Added by tynli.
++//
++/*
++     | BIT15:12           |  BIT11:8        | BIT 7              |  BIT6:4  |      BIT3          | BIT2:0  |
++     |-------------+-----------+-----------+-------+-----------+-------|
++     | IC version(CUT)  | ROM version  | Manufacturer  | RF type  |  Chip type       | IC Type |
++     |                           |                      | TSMC/UMC    |              | TEST/NORMAL|             |
++*/
++// [15:12] IC version(CUT): A-cut=0, B-cut=1, C-cut=2, D-cut=3
++// [7] Manufacturer: TSMC=0, UMC=1
++// [6:4] RF type: 1T1R=0, 1T2R=1, 2T2R=2
++// [3] Chip type: TEST=0, NORMAL=1
++// [2:0] IC type: 81xxC=0, 8723=1, 92D=2
++
++#define CHIP_8723						BIT(0)
++#define CHIP_92D						BIT(1)
++#define NORMAL_CHIP  					BIT(3)
++#define RF_TYPE_1T1R					(~(BIT(4)|BIT(5)|BIT(6)))
++#define RF_TYPE_1T2R					BIT(4)
++#define RF_TYPE_2T2R					BIT(5)
++#define CHIP_VENDOR_UMC				BIT(7)
++#define B_CUT_VERSION					BIT(12)
++#define C_CUT_VERSION					BIT(13)
++#define D_CUT_VERSION					((BIT(13)|BIT(14)))
++
++
++// MASK
++#define IC_TYPE_MASK					(BIT(0)|BIT(1)|BIT(2))
++#define CHIP_TYPE_MASK 				BIT(3)
++#define RF_TYPE_MASK					(BIT(4)|BIT(5)|BIT(6))
++#define MANUFACTUER_MASK			BIT(7)	
++#define ROM_VERSION_MASK				(BIT(11)|BIT(10)|BIT(9)|BIT(8))
++#define CUT_VERSION_MASK				(BIT(15)|BIT(14)|BIT(13)|BIT(12))
++
++// Get element
++#define GET_CVID_IC_TYPE(version)			((version) & IC_TYPE_MASK)
++#define GET_CVID_CHIP_TYPE(version)			((version) & CHIP_TYPE_MASK)
++#define GET_CVID_RF_TYPE(version)			((version) & RF_TYPE_MASK)
++#define GET_CVID_MANUFACTUER(version)		((version) & MANUFACTUER_MASK)
++#define GET_CVID_ROM_VERSION(version)		((version) & ROM_VERSION_MASK)
++#define GET_CVID_CUT_VERSION(version)		((version) & CUT_VERSION_MASK)
++
++#define IS_81XXC(version)					((GET_CVID_IC_TYPE(version) == 0)? _TRUE : _FALSE)
++#define IS_8723_SERIES(version)				((GET_CVID_IC_TYPE(version) == CHIP_8723)? _TRUE : _FALSE)
++#define IS_92D(version)						((GET_CVID_IC_TYPE(version) == CHIP_92D)? _TRUE : _FALSE)
++#define IS_1T1R(version)						((GET_CVID_RF_TYPE(version))? _FALSE : _TRUE)
++#define IS_1T2R(version)						((GET_CVID_RF_TYPE(version) == RF_TYPE_1T2R)? _TRUE : _FALSE)
++#define IS_2T2R(version)						((GET_CVID_RF_TYPE(version) == RF_TYPE_2T2R)? _TRUE : _FALSE)
++#define IS_NORMAL_CHIP(version)				((GET_CVID_CHIP_TYPE(version))? _TRUE: _FALSE)
++#define IS_CHIP_VENDOR_UMC(version)			((GET_CVID_MANUFACTUER(version))? _TRUE: _FALSE)
++
++#define IS_81XXC_TEST_CHIP(version)			((IS_81XXC(version) && (!IS_NORMAL_CHIP(version)))? _TRUE: _FALSE)
++#define IS_92D_TEST_CHIP(version)				((IS_92D(version) && (!IS_NORMAL_CHIP(version)))? _TRUE: _FALSE)
++#define IS_92C_SERIAL(version)   				((IS_81XXC(version) && IS_2T2R(version)) ? _TRUE : _FALSE)
++#define IS_VENDOR_UMC_A_CUT(version)		((IS_CHIP_VENDOR_UMC(version)) ? ((GET_CVID_CUT_VERSION(version)) ? _FALSE : _TRUE) : _FALSE)
++#define IS_VENDOR_8723_A_CUT(version)		((IS_8723_SERIES(version)) ? ((GET_CVID_CUT_VERSION(version)) ? _FALSE : _TRUE) : _FALSE)
++// <tynli_Note> 88/92C UMC B-cut vendor is set to TSMC so we need to check CHIP_VENDOR_UMC bit is not 1. 
++#define IS_81xxC_VENDOR_UMC_B_CUT(version)	((IS_CHIP_VENDOR_UMC(version)) ? ((GET_CVID_CUT_VERSION(version) == B_CUT_VERSION) ? _TRUE : _FALSE):_FALSE)
++#define IS_92D_SINGLEPHY(version)     			((IS_92D(version)) ? (IS_2T2R(version) ? _TRUE: _FALSE) : _FALSE)
++#define IS_92D_C_CUT(version)    				((IS_92D(version)) ? ((GET_CVID_CUT_VERSION(version) == 0x2) ? _TRUE : _FALSE) : _FALSE)
++#define IS_92D_D_CUT(version)    				((IS_92D(version)) ? ((GET_CVID_CUT_VERSION(version) == 0x3) ? _TRUE : _FALSE) : _FALSE)
++
++typedef enum _VERSION_8192C{
++	VERSION_TEST_CHIP_88C = 0x0000,
++	VERSION_TEST_CHIP_92C = 0x0020,
++	VERSION_TEST_UMC_CHIP_8723 = 0x0081,
++	VERSION_NORMAL_TSMC_CHIP_88C = 0x0008, 
++	VERSION_NORMAL_TSMC_CHIP_92C = 0x0028,
++	VERSION_NORMAL_TSMC_CHIP_92C_1T2R = 0x0018,
++	VERSION_NORMAL_UMC_CHIP_88C_A_CUT = 0x0088,
++	VERSION_NORMAL_UMC_CHIP_92C_A_CUT = 0x00a8,
++	VERSION_NORMAL_UMC_CHIP_92C_1T2R_A_CUT = 0x0098,		
++	VERSION_NORMAL_UMC_CHIP_8723_1T1R_A_CUT = 0x0089,
++	VERSION_NORMAL_UMC_CHIP_8723_1T1R_B_CUT = 0x1089,	
++	VERSION_NORMAL_UMC_CHIP_88C_B_CUT = 0x1088, 
++	VERSION_NORMAL_UMC_CHIP_92C_B_CUT = 0x10a8, 
++	VERSION_NORMAL_UMC_CHIP_92C_1T2R_B_CUT = 0x1090, 
++	VERSION_TEST_CHIP_92D_SINGLEPHY= 0x0022,
++	VERSION_TEST_CHIP_92D_DUALPHY = 0x0002,
++	VERSION_NORMAL_CHIP_92D_SINGLEPHY= 0x002a,
++	VERSION_NORMAL_CHIP_92D_DUALPHY = 0x000a,
++	VERSION_NORMAL_CHIP_92D_C_CUT_SINGLEPHY = 0x202a,
++	VERSION_NORMAL_CHIP_92D_C_CUT_DUALPHY = 0x200a,
++	VERSION_NORMAL_CHIP_92D_D_CUT_SINGLEPHY = 0x302a,
++	VERSION_NORMAL_CHIP_92D_D_CUT_DUALPHY = 0x300a,
++}VERSION_8192C,*PVERSION_8192C;
++
++
++
++//-------------------------------------------------------------------------
++//	Channel Plan
++//-------------------------------------------------------------------------
++enum ChannelPlan{
++	CHPL_FCC	= 0,
++	CHPL_IC		= 1,
++	CHPL_ETSI	= 2,
++	CHPL_SPAIN	= 3,
++	CHPL_FRANCE	= 4,
++	CHPL_MKK	= 5,
++	CHPL_MKK1	= 6,
++	CHPL_ISRAEL	= 7,
++	CHPL_TELEC	= 8,
++	CHPL_GLOBAL	= 9,
++	CHPL_WORLD	= 10,
++};
++
++typedef struct _TxPowerInfo{
++	u8 CCKIndex[RF_PATH_MAX][CHANNEL_GROUP_MAX];
++	u8 HT40_1SIndex[RF_PATH_MAX][CHANNEL_GROUP_MAX];
++	u8 HT40_2SIndexDiff[RF_PATH_MAX][CHANNEL_GROUP_MAX];
++	s8 HT20IndexDiff[RF_PATH_MAX][CHANNEL_GROUP_MAX];
++	u8 OFDMIndexDiff[RF_PATH_MAX][CHANNEL_GROUP_MAX];
++	u8 HT40MaxOffset[RF_PATH_MAX][CHANNEL_GROUP_MAX];
++	u8 HT20MaxOffset[RF_PATH_MAX][CHANNEL_GROUP_MAX];
++	u8 TSSI_A;
++	u8 TSSI_B;
++}TxPowerInfo, *PTxPowerInfo;
++
++#define		EFUSE_REAL_CONTENT_LEN		512
++#define		EFUSE_MAP_LEN					128
++#define		EFUSE_MAX_SECTION			16
++#define		EFUSE_IC_ID_OFFSET			506	//For some inferiority IC purpose. added by Roger, 2009.09.02.
++#define 		AVAILABLE_EFUSE_ADDR(addr) 	(addr < EFUSE_REAL_CONTENT_LEN)
++//
++// <Roger_Notes> To prevent out of boundary programming case, leave 1byte and program full section
++// 9bytes + 1byt + 5bytes and pre 1byte.
++// For worst case:
++// | 1byte|----8bytes----|1byte|--5bytes--| 
++// |         |            Reserved(14bytes)	      |
++//
++#define		EFUSE_OOB_PROTECT_BYTES 		15	// PG data exclude header, dummy 6 bytes frome CP test and reserved 1byte.
++
++
++#define		EFUSE_MAP_LEN_8723			256
++#define		EFUSE_MAX_SECTION_8723		32
++
++//========================================================
++//			EFUSE for BT definition
++//========================================================
++#define		EFUSE_BT_REAL_CONTENT_LEN		1536	// 512*3
++#define		EFUSE_BT_MAP_LEN					1024	// 1k bytes
++#define		EFUSE_BT_MAX_SECTION				128		// 1024/8
++
++#define		EFUSE_PROTECT_BYTES_BANK			16
++
++//
++// <Roger_Notes> For RTL8723 WiFi/BT/GPS multi-function configuration. 2010.10.06.
++//
++typedef enum _RT_MULTI_FUNC{
++	RT_MULTI_FUNC_NONE = 0x00,
++	RT_MULTI_FUNC_WIFI = 0x01,
++	RT_MULTI_FUNC_BT = 0x02,
++	RT_MULTI_FUNC_GPS = 0x04,
++}RT_MULTI_FUNC,*PRT_MULTI_FUNC;
++
++//
++// <Roger_Notes> For RTL8723 WiFi PDn/GPIO polarity control configuration. 2010.10.08.
++//
++typedef enum _RT_POLARITY_CTL{
++	RT_POLARITY_LOW_ACT = 0,
++	RT_POLARITY_HIGH_ACT = 1,	
++}RT_POLARITY_CTL,*PRT_POLARITY_CTL;
++
++// For RTL8723 regulator mode. by tynli. 2011.01.14.
++typedef enum _RT_REGULATOR_MODE{
++	RT_SWITCHING_REGULATOR = 0,
++	RT_LDO_REGULATOR = 1,	
++}RT_REGULATOR_MODE,*PRT_REGULATOR_MODE;
++
++enum c2h_id_8192c {
++	C2H_DBG = 0,
++	C2H_TSF = 1,
++	C2H_AP_RPT_RSP = 2,
++	C2H_CCX_TX_RPT = 3,
++	C2H_BT_RSSI = 4,
++	C2H_BT_OP_MODE = 5,
++	C2H_EXT_RA_RPT = 6,
++	C2H_HW_INFO_EXCH = 10,
++	C2H_C2H_H2C_TEST = 11,
++	C2H_BT_INFO = 12,
++	C2H_BT_MP_INFO = 15,
++	MAX_C2HEVENT
++};
++
++#ifdef CONFIG_PCI_HCI
++struct hal_data_8192ce
++{
++	VERSION_8192C		VersionID;
++	RT_MULTI_FUNC		MultiFunc; // For multi-function consideration.
++	RT_POLARITY_CTL		PolarityCtl; // For Wifi PDn Polarity control.
++	RT_REGULATOR_MODE	RegulatorMode; // switching regulator or LDO
++	u16	CustomerID;
++
++	u16	FirmwareVersion;
++	u16	FirmwareVersionRev;
++	u16	FirmwareSubVersion;
++
++	u32	IntrMask[2];
++	u32	IntrMaskToSet[2];
++
++	u32	DisabledFunctions;
++	
++	//current WIFI_PHY values
++	u32	ReceiveConfig;
++	u32	TransmitConfig;
++	WIRELESS_MODE		CurrentWirelessMode;
++	HT_CHANNEL_WIDTH	CurrentChannelBW;
++	u8	CurrentChannel;
++	u8	nCur40MhzPrimeSC;// Control channel sub-carrier
++
++	u16	BasicRateSet;
++
++	//rf_ctrl
++	_lock	rf_lock;
++	u8	rf_chip;
++	u8	rf_type;
++	u8	NumTotalRFPath;
++
++	INTERFACE_SELECT_8192CPCIe	InterfaceSel;
++
++	//
++	// EEPROM setting.
++	//
++	u16	EEPROMVID;
++	u16	EEPROMDID;
++	u16	EEPROMSVID;
++	u16	EEPROMSMID;
++	u16	EEPROMChannelPlan;
++	u16	EEPROMVersion;
++
++	u8	EEPROMChnlAreaTxPwrCCK[2][3];	
++	u8	EEPROMChnlAreaTxPwrHT40_1S[2][3];	
++	u8	EEPROMChnlAreaTxPwrHT40_2SDiff[2][3];
++	u8	EEPROMPwrLimitHT20[3];
++	u8	EEPROMPwrLimitHT40[3];
++
++	u8	bTXPowerDataReadFromEEPORM;
++	u8	EEPROMThermalMeter;
++	u8	EEPROMTSSI[2];
++
++	u8	EEPROMCustomerID;
++	u8	EEPROMBoardType;
++	u8	EEPROMRegulatory;
++
++	u8	bDefaultAntenna;
++	u8	bIQKInitialized;
++
++	u8	TxPwrLevelCck[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
++	u8	TxPwrLevelHT40_1S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];	// For HT 40MHZ pwr
++	u8	TxPwrLevelHT40_2S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];	// For HT 40MHZ pwr	
++	s8	TxPwrHt20Diff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];// HT 20<->40 Pwr diff
++	u8	TxPwrLegacyHtDiff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];// For HT<->legacy pwr diff
++	// For power group
++	u8	PwrGroupHT20[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
++	u8	PwrGroupHT40[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
++
++	u8	LegacyHTTxPowerDiff;// Legacy to HT rate power diff
++
++#ifdef CONFIG_BT_COEXIST
++	struct btcoexist_priv	bt_coexist;
++#endif
++
++	// Read/write are allow for following hardware information variables
++	u8	framesync;
++	u32	framesyncC34;
++	u8	framesyncMonitor;
++	u8	DefaultInitialGain[4];
++	u8	pwrGroupCnt;
++	u32	MCSTxPowerLevelOriginalOffset[7][16];
++	u32	CCKTxPowerLevelOriginalOffset;
++
++	u32	AntennaTxPath;					// Antenna path Tx
++	u32	AntennaRxPath;					// Antenna path Rx
++	u8	BluetoothCoexist;
++	u8	ExternalPA;
++
++	//u32	LedControlNum;
++	//u32	LedControlMode;
++	u8	bLedOpenDrain; // Support Open-drain arrangement for controlling the LED. Added by Roger, 2009.10.16.
++	//u32	TxPowerTrackControl;
++	u8	b1x1RecvCombine;	// for 1T1R receive combining
++
++	u8	bCurrentTurboEDCA;
++	u32	AcParam_BE; //Original parameter for BE, use for EDCA turbo.
++
++	//vivi, for tx power tracking, 20080407
++	//u16	TSSI_13dBm;
++	//u32	Pwr_Track;
++	// The current Tx Power Level
++	u8	CurrentCckTxPwrIdx;
++	u8	CurrentOfdm24GTxPwrIdx;
++
++	BB_REGISTER_DEFINITION_T	PHYRegDef[4];	//Radio A/B/C/D
++
++	BOOLEAN		bRFPathRxEnable[4];	// We support 4 RF path now.
++
++	u32	RfRegChnlVal[2];
++
++	u8	bCckHighPower;
++
++	//RDG enable
++	BOOLEAN	 bRDGEnable;
++
++	//for host message to fw
++	u8	LastHMEBoxNum;
++
++	u8	fw_ractrl;
++	u8	RegTxPause;
++	// Beacon function related global variable.
++	u32	RegBcnCtrlVal;
++	u8	RegFwHwTxQCtrl;
++	u8	RegReg542;
++	u8	CurAntenna;	
++	u8	AntDivCfg;
++
++#ifdef CONFIG_SW_ANTENNA_DIVERSITY
++	//SW Antenna Switch
++	s32				RSSI_sum_A;
++	s32				RSSI_sum_B;
++	s32				RSSI_cnt_A;
++	s32				RSSI_cnt_B;
++	BOOLEAN		RSSI_test;
++#endif
++#ifdef CONFIG_HW_ANTENNA_DIVERSITY
++	//Hybrid Antenna Diversity
++	u32				CCK_Ant1_Cnt;
++	u32				CCK_Ant2_Cnt;
++	u32				OFDM_Ant1_Cnt;
++	u32				OFDM_Ant2_Cnt;
++#endif
++
++	struct dm_priv	dmpriv;
++	u8	bDumpRxPkt;//for debug
++#ifdef DBG_CONFIG_ERROR_DETECT
++	struct sreset_priv srestpriv;
++#endif
++	u8	bInterruptMigration;
++	u8	bDisableTxInt;
++	u8	bGpioHwWpsPbc;
++
++	u8	FwRsvdPageStartOffset; //2010.06.23. Added by tynli. Reserve page start offset except beacon in TxQ.
++
++	u16	EfuseUsedBytes;
++	
++#ifdef CONFIG_P2P
++	struct P2P_PS_Offload_t	p2p_ps_offload;
++#endif //CONFIG_P2P
++};
++
++typedef struct hal_data_8192ce HAL_DATA_TYPE, *PHAL_DATA_TYPE;
++
++//
++// Function disabled.
++//
++#define DF_TX_BIT		BIT0
++#define DF_RX_BIT		BIT1
++#define DF_IO_BIT		BIT2
++#define DF_IO_D3_BIT			BIT3
++
++#define RT_DF_TYPE		u32
++#define RT_DISABLE_FUNC(__pAdapter, __FuncBits) ((__pAdapter)->DisabledFunctions |= ((RT_DF_TYPE)(__FuncBits)))
++#define RT_ENABLE_FUNC(__pAdapter, __FuncBits) ((__pAdapter)->DisabledFunctions &= (~((RT_DF_TYPE)(__FuncBits))))
++#define RT_IS_FUNC_DISABLED(__pAdapter, __FuncBits) ( (__pAdapter)->DisabledFunctions & (__FuncBits) )
++#define IS_MULTI_FUNC_CHIP(_Adapter)	(((((PHAL_DATA_TYPE)(_Adapter->HalData))->MultiFunc) & (RT_MULTI_FUNC_BT|RT_MULTI_FUNC_GPS)) ? _TRUE : _FALSE)
++
++void InterruptRecognized8192CE(PADAPTER Adapter, PRT_ISR_CONTENT pIsrContent);
++VOID UpdateInterruptMask8192CE(PADAPTER Adapter, u32 AddMSR, u32 AddMSR1, u32 RemoveMSR, u32 RemoveMSR1);
++#endif
++
++#ifdef CONFIG_USB_HCI
++struct hal_data_8192cu
++{
++	VERSION_8192C		VersionID;
++	RT_MULTI_FUNC		MultiFunc; // For multi-function consideration.
++	RT_POLARITY_CTL		PolarityCtl; // For Wifi PDn Polarity control.
++	RT_REGULATOR_MODE	RegulatorMode; // switching regulator or LDO
++	u16	CustomerID;
++
++	u16	FirmwareVersion;
++	u16	FirmwareVersionRev;
++	u16	FirmwareSubVersion;
++
++	//current WIFI_PHY values
++	u32	ReceiveConfig;
++	WIRELESS_MODE		CurrentWirelessMode;
++	HT_CHANNEL_WIDTH	CurrentChannelBW;
++	u8	CurrentChannel;
++	u8	nCur40MhzPrimeSC;// Control channel sub-carrier
++
++	u16	BasicRateSet;
++
++	//rf_ctrl
++	u8	rf_chip;
++	u8	rf_type;
++	u8	NumTotalRFPath;
++
++	u8	BoardType;
++	//INTERFACE_SELECT_8192CUSB	InterfaceSel;
++
++	//
++	// EEPROM setting.
++	//
++	u16	EEPROMVID;
++	u16	EEPROMPID;
++	u16	EEPROMSVID;
++	u16	EEPROMSDID;
++	u8	EEPROMCustomerID;
++	u8	EEPROMSubCustomerID;
++	u8	EEPROMVersion;
++	u8	EEPROMRegulatory;
++
++	u8	bTXPowerDataReadFromEEPORM;
++	u8	EEPROMThermalMeter;
++
++	u8	bIQKInitialized;
++
++	u8	TxPwrLevelCck[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
++	u8	TxPwrLevelHT40_1S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];	// For HT 40MHZ pwr
++	u8	TxPwrLevelHT40_2S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];	// For HT 40MHZ pwr	
++	s8	TxPwrHt20Diff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];// HT 20<->40 Pwr diff
++	u8	TxPwrLegacyHtDiff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];// For HT<->legacy pwr diff
++	// For power group
++	u8	PwrGroupHT20[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
++	u8	PwrGroupHT40[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
++
++	u8	LegacyHTTxPowerDiff;// Legacy to HT rate power diff
++
++	// Read/write are allow for following hardware information variables
++	u8	framesync;
++	u32	framesyncC34;
++	u8	framesyncMonitor;
++	u8	DefaultInitialGain[4];
++	u8	pwrGroupCnt;
++	u32	MCSTxPowerLevelOriginalOffset[7][16];
++	u32	CCKTxPowerLevelOriginalOffset;
++
++	u32	AntennaTxPath;					// Antenna path Tx
++	u32	AntennaRxPath;					// Antenna path Rx
++	u8	BluetoothCoexist;
++	u8	ExternalPA;
++
++	u8	bLedOpenDrain; // Support Open-drain arrangement for controlling the LED. Added by Roger, 2009.10.16.
++
++	//u32	LedControlNum;
++	//u32	LedControlMode;
++	//u32	TxPowerTrackControl;
++	u8	b1x1RecvCombine;	// for 1T1R receive combining
++
++	u8	bCurrentTurboEDCA;
++	u32	AcParam_BE; //Original parameter for BE, use for EDCA turbo.
++
++	//vivi, for tx power tracking, 20080407
++	//u16	TSSI_13dBm;
++	//u32	Pwr_Track;
++	// The current Tx Power Level
++	u8	CurrentCckTxPwrIdx;
++	u8	CurrentOfdm24GTxPwrIdx;
++
++	BB_REGISTER_DEFINITION_T	PHYRegDef[4];	//Radio A/B/C/D
++
++	BOOLEAN		bRFPathRxEnable[4];	// We support 4 RF path now.
++
++	u32	RfRegChnlVal[2];
++
++	u8	bCckHighPower;
++
++	//RDG enable
++	BOOLEAN	 bRDGEnable;
++
++	//for host message to fw
++	u8	LastHMEBoxNum;
++
++	u8	fw_ractrl;
++	u8	RegTxPause;
++	// Beacon function related global variable.
++	u32	RegBcnCtrlVal;
++	u8	RegFwHwTxQCtrl;
++	u8	RegReg542;
++
++	struct dm_priv	dmpriv;
++#ifdef DBG_CONFIG_ERROR_DETECT
++	struct sreset_priv srestpriv;
++#endif	
++
++#ifdef CONFIG_BT_COEXIST
++	struct btcoexist_priv	bt_coexist;
++#endif
++	u8	CurAntenna;	
++	u8	AntDivCfg;
++
++#ifdef CONFIG_SW_ANTENNA_DIVERSITY
++	//SW Antenna Switch
++	s32				RSSI_sum_A;
++	s32				RSSI_sum_B;
++	s32				RSSI_cnt_A;
++	s32				RSSI_cnt_B;
++	BOOLEAN		RSSI_test;
++#endif
++#ifdef CONFIG_HW_ANTENNA_DIVERSITY
++	//Hybrid Antenna Diversity
++	u32				CCK_Ant1_Cnt;
++	u32				CCK_Ant2_Cnt;
++	u32				OFDM_Ant1_Cnt;
++	u32				OFDM_Ant2_Cnt;
++#endif
++
++	u8	bDumpRxPkt;//for debug
++	u8	FwRsvdPageStartOffset; //2010.06.23. Added by tynli. Reserve page start offset except beacon in TxQ.
++
++	// 2010/08/09 MH Add CU power down mode.
++	BOOLEAN		pwrdown;
++
++	// For 92C USB endpoint setting
++	//
++
++	u32	UsbBulkOutSize;
++
++	int	RtBulkOutPipe[3];
++	int	RtBulkInPipe;
++	int	RtIntInPipe;
++	// Add for dual MAC  0--Mac0 1--Mac1
++	u32	interfaceIndex;
++
++	u8	OutEpQueueSel;
++	u8	OutEpNumber;
++
++	u8	Queue2EPNum[8];//for out endpoint number mapping
++
++#ifdef CONFIG_USB_TX_AGGREGATION
++	u8	UsbTxAggMode;
++	u8	UsbTxAggDescNum;
++#endif
++#ifdef CONFIG_USB_RX_AGGREGATION
++	u16	HwRxPageSize;				// Hardware setting
++	u32	MaxUsbRxAggBlock;
++
++	USB_RX_AGG_MODE	UsbRxAggMode;
++	u8	UsbRxAggBlockCount;			// USB Block count. Block size is 512-byte in hight speed and 64-byte in full speed
++	u8	UsbRxAggBlockTimeout;
++	u8	UsbRxAggPageCount;			// 8192C DMA page count
++	u8	UsbRxAggPageTimeout;
++#endif
++
++	// 2010/12/10 MH Add for USB aggreation mode dynamic shceme.
++	BOOLEAN		UsbRxHighSpeedMode;
++
++	// 2010/11/22 MH Add for slim combo debug mode selective.
++	// This is used for fix the drawback of CU TSMC-A/UMC-A cut. HW auto suspend ability. Close BT clock.
++	BOOLEAN		SlimComboDbg;
++
++	u16	EfuseUsedBytes;
++
++#ifdef CONFIG_P2P
++	struct P2P_PS_Offload_t	p2p_ps_offload;
++#endif //CONFIG_P2P
++};
++
++typedef struct hal_data_8192cu HAL_DATA_TYPE, *PHAL_DATA_TYPE;
++#endif
++
++#define GET_HAL_DATA(__pAdapter)	((HAL_DATA_TYPE *)((__pAdapter)->HalData))
++#define GET_RF_TYPE(priv)	(GET_HAL_DATA(priv)->rf_type)
++
++#define INCLUDE_MULTI_FUNC_BT(_Adapter)	(GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_BT)
++#define INCLUDE_MULTI_FUNC_GPS(_Adapter)	(GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_GPS)
++
++VOID rtl8192c_FirmwareSelfReset(IN PADAPTER Adapter);
++int FirmwareDownload92C(IN PADAPTER Adapter,IN	BOOLEAN			bUsedWoWLANFw);
++VOID InitializeFirmwareVars92C(PADAPTER Adapter);
++u8 GetEEPROMSize8192C(PADAPTER Adapter);
++void rtl8192c_EfuseParseChnlPlan(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
++VERSION_8192C rtl8192c_ReadChipVersion(IN PADAPTER Adapter);
++void rtl8192c_ReadBluetoothCoexistInfo(PADAPTER Adapter, u8 *PROMContent, BOOLEAN AutoloadFail);
++//void rtl8192c_free_hal_data(_adapter * padapter);
++VOID rtl8192c_EfuseParseIDCode(PADAPTER pAdapter, u8 *hwinfo);
++void rtl8192c_set_hal_ops(struct hal_ops *pHalFunc);
++
++s32 c2h_id_filter_ccx_8192c(u8 id);
++#endif
++
++#ifdef CONFIG_MP_INCLUDED
++
++extern void Hal_SetAntenna(PADAPTER pAdapter);
++extern void Hal_SetBandwidth(PADAPTER pAdapter);
++
++extern void Hal_SetTxPower(PADAPTER pAdapter);
++extern void Hal_SetCarrierSuppressionTx(PADAPTER pAdapter, u8 bStart);
++extern void Hal_SetSingleToneTx ( PADAPTER pAdapter , u8 bStart );
++extern void Hal_SetSingleCarrierTx (PADAPTER pAdapter, u8 bStart);
++extern void Hal_SetContinuousTx (PADAPTER pAdapter, u8 bStart);
++
++extern void Hal_SetDataRate(PADAPTER pAdapter);
++extern void Hal_SetChannel(PADAPTER pAdapter);
++extern void Hal_SetAntennaPathPower(PADAPTER pAdapter);
++extern s32 Hal_SetThermalMeter(PADAPTER pAdapter, u8 target_ther);
++extern s32 Hal_SetPowerTracking(PADAPTER padapter, u8 enable);
++extern void Hal_GetPowerTracking(PADAPTER padapter, u8 * enable);
++extern void Hal_GetThermalMeter(PADAPTER pAdapter, u8 *value);
++extern void Hal_mpt_SwitchRfSetting(PADAPTER pAdapter);
++extern void Hal_MPT_CCKTxPowerAdjust(PADAPTER Adapter, BOOLEAN bInCH14);
++extern void Hal_MPT_CCKTxPowerAdjustbyIndex(PADAPTER pAdapter, BOOLEAN beven);
++extern void Hal_SetCCKTxPower(PADAPTER pAdapter, u8 * TxPower);
++extern void Hal_SetOFDMTxPower(PADAPTER pAdapter, u8 * TxPower);
++extern void Hal_TriggerRFThermalMeter(PADAPTER pAdapter);
++extern u8 Hal_ReadRFThermalMeter(PADAPTER pAdapter);
++extern void Hal_SetCCKContinuousTx(PADAPTER pAdapter, u8 bStart);
++extern void Hal_SetOFDMContinuousTx(PADAPTER pAdapter, u8 bStart);
++
++#endif
++
++
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192c_led.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192c_led.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192c_led.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192c_led.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,42 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __RTL8192C_LED_H_
++#define __RTL8192C_LED_H_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++
++
++//================================================================================
++// Interface to manipulate LED objects.
++//================================================================================
++#ifdef CONFIG_USB_HCI
++void rtl8192cu_InitSwLeds(_adapter *padapter);
++void rtl8192cu_DeInitSwLeds(_adapter *padapter);
++#endif
++#ifdef CONFIG_PCI_HCI
++void rtl8192ce_gen_RefreshLedState(PADAPTER Adapter);
++void rtl8192ce_InitSwLeds(_adapter *padapter);
++void rtl8192ce_DeInitSwLeds(_adapter *padapter);
++#endif
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192c_recv.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192c_recv.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192c_recv.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192c_recv.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,184 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef _RTL8192C_RECV_H_
++#define _RTL8192C_RECV_H_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++
++
++#ifdef PLATFORM_OS_XP
++	#define NR_RECVBUFF (16)
++#elif defined(PLATFORM_OS_CE)
++	#define NR_RECVBUFF (4)
++#else
++#ifdef CONFIG_SINGLE_RECV_BUF
++	#define NR_RECVBUFF (1)
++#else
++	#define NR_RECVBUFF (4)
++#endif //CONFIG_SINGLE_RECV_BUF
++
++	#define NR_PREALLOC_RECV_SKB (8)
++#endif
++
++
++#define RECV_BLK_SZ 512
++#define RECV_BLK_CNT 16
++#define RECV_BLK_TH RECV_BLK_CNT
++
++#if defined(CONFIG_USB_HCI)
++
++#ifdef PLATFORM_OS_CE
++#define MAX_RECVBUF_SZ (8192+1024) // 8K+1k
++#else
++	#ifndef CONFIG_MINIMAL_MEMORY_USAGE
++		//#define MAX_RECVBUF_SZ (32768) // 32k
++		//#define MAX_RECVBUF_SZ (16384) //16K
++		//#define MAX_RECVBUF_SZ (10240) //10K
++		#ifdef CONFIG_PLATFORM_MSTAR
++			#define MAX_RECVBUF_SZ (8192) // 8K
++		#else
++			#define MAX_RECVBUF_SZ (15360) // 15k < 16k
++		#endif
++		//#define MAX_RECVBUF_SZ (8192+1024) // 8K+1k
++	#else
++		#define MAX_RECVBUF_SZ (4000) // about 4K
++	#endif
++#endif
++
++#elif defined(CONFIG_PCI_HCI)
++//#ifndef CONFIG_MINIMAL_MEMORY_USAGE
++//	#define MAX_RECVBUF_SZ (9100)
++//#else
++	#define MAX_RECVBUF_SZ (4000) // about 4K
++//#endif
++
++#define RX_MPDU_QUEUE				0
++#define RX_CMD_QUEUE				1
++#define RX_MAX_QUEUE				2
++#endif
++
++
++#define RECV_BULK_IN_ADDR		0x80
++#define RECV_INT_IN_ADDR		0x81
++
++#define PHY_RSSI_SLID_WIN_MAX				100
++#define PHY_LINKQUALITY_SLID_WIN_MAX		20
++
++
++struct phy_stat
++{
++	unsigned int phydw0;
++
++	unsigned int phydw1;
++
++	unsigned int phydw2;
++
++	unsigned int phydw3;
++
++	unsigned int phydw4;
++
++	unsigned int phydw5;
++
++	unsigned int phydw6;
++
++	unsigned int phydw7;
++};
++
++typedef struct _Phy_OFDM_Rx_Status_Report_8192cd
++{
++	unsigned char	trsw_gain_X[4];
++	unsigned char	pwdb_all;
++	unsigned char	cfosho_X[4];
++	unsigned char	cfotail_X[4];
++	unsigned char	rxevm_X[2];
++	unsigned char	rxsnr_X[4];
++	unsigned char	pdsnr_X[2];
++	unsigned char	csi_current_X[2];
++	unsigned char	csi_target_X[2];
++	unsigned char	sigevm;
++	unsigned char	max_ex_pwr;
++//#ifdef RTL8192SE
++#ifdef CONFIG_LITTLE_ENDIAN
++	unsigned char ex_intf_flg:1;
++	unsigned char sgi_en:1;
++	unsigned char rxsc:2;
++	//unsigned char rsvd:4;
++	unsigned char idle_long:1;
++	unsigned char r_ant_train_en:1;
++	unsigned char ANTSELB:1;
++	unsigned char ANTSEL:1;	
++#else	// _BIG_ENDIAN_
++	//unsigned char rsvd:4;
++	unsigned char ANTSEL:1;	
++	unsigned char ANTSELB:1;
++	unsigned char r_ant_train_en:1;
++	unsigned char idle_long:1;
++	unsigned char rxsc:2;
++	unsigned char sgi_en:1;
++	unsigned char ex_intf_flg:1;
++#endif
++//#else	// RTL8190, RTL8192E
++//	unsigned char	sgi_en;
++//	unsigned char	rxsc_sgien_exflg;
++//#endif
++} __attribute__ ((packed))PHY_STS_OFDM_8192CD_T,PHY_RX_DRIVER_INFO_8192CD;
++
++typedef struct _Phy_CCK_Rx_Status_Report_8192cd
++{
++	/* For CCK rate descriptor. This is a signed 8:1 variable. LSB bit presend
++		0.5. And MSB 7 bts presend a signed value. Range from -64~+63.5. */
++	u8	adc_pwdb_X[4];
++	u8	SQ_rpt;
++	u8	cck_agc_rpt;
++} PHY_STS_CCK_8192CD_T;
++
++
++// Rx smooth factor
++#define	Rx_Smooth_Factor (20)
++
++
++#ifdef CONFIG_USB_HCI
++typedef struct _INTERRUPT_MSG_FORMAT_EX{
++	unsigned int C2H_MSG0;
++	unsigned int C2H_MSG1;
++	unsigned int C2H_MSG2;
++	unsigned int C2H_MSG3;
++	unsigned int HISR; // from HISR Reg0x124, read to clear
++	unsigned int HISRE;// from HISRE Reg0x12c, read to clear
++	unsigned int  MSG_EX;
++}INTERRUPT_MSG_FORMAT_EX,*PINTERRUPT_MSG_FORMAT_EX;
++
++void rtl8192cu_init_recvbuf(_adapter *padapter, struct recv_buf *precvbuf);
++int	rtl8192cu_init_recv_priv(_adapter * padapter);
++void rtl8192cu_free_recv_priv(_adapter * padapter);
++#endif
++
++#ifdef CONFIG_PCI_HCI
++int	rtl8192ce_init_recv_priv(_adapter * padapter);
++void rtl8192ce_free_recv_priv(_adapter * padapter);
++#endif
++
++void rtl8192c_translate_rx_signal_stuff(union recv_frame *precvframe, struct phy_stat *pphy_info);
++void rtl8192c_query_rx_desc_status(union recv_frame *precvframe, struct recv_stat *pdesc);
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192c_rf.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192c_rf.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192c_rf.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192c_rf.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,92 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++/******************************************************************************
++ * 
++ * 
++ * Module:	rtl8192c_rf.h	( Header File)
++ * 
++ * Note:	Collect every HAL RF type exter API or constant.	 
++ *
++ * Function:	
++ * 		 
++ * Export:	
++ * 
++ * Abbrev:	
++ * 
++ * History:
++ * Data			Who		Remark
++ * 
++ * 09/25/2008	MHC		Create initial version.
++ * 
++ * 
++******************************************************************************/
++#ifndef _RTL8192C_RF_H_
++#define _RTL8192C_RF_H_
++/* Check to see if the file has been included already.  */
++
++
++/*--------------------------Define Parameters-------------------------------*/
++
++//
++// For RF 6052 Series
++//
++#define		RF6052_MAX_TX_PWR			0x3F
++#define		RF6052_MAX_REG				0x3F
++#define		RF6052_MAX_PATH				2
++/*--------------------------Define Parameters-------------------------------*/
++
++
++/*------------------------------Define structure----------------------------*/ 
++
++/*------------------------------Define structure----------------------------*/ 
++
++
++/*------------------------Export global variable----------------------------*/
++/*------------------------Export global variable----------------------------*/
++
++/*------------------------Export Marco Definition---------------------------*/
++
++/*------------------------Export Marco Definition---------------------------*/
++
++
++/*--------------------------Exported Function prototype---------------------*/
++
++//
++// RF RL6052 Series API
++//
++void		rtl8192c_RF_ChangeTxPath(	IN	PADAPTER	Adapter, 
++										IN	u16		DataRate);
++void		rtl8192c_PHY_RF6052SetBandwidth(	
++										IN	PADAPTER				Adapter,
++										IN	HT_CHANNEL_WIDTH		Bandwidth);	
++VOID	rtl8192c_PHY_RF6052SetCckTxPower(
++										IN	PADAPTER	Adapter,
++										IN	u8*		pPowerlevel);
++VOID	rtl8192c_PHY_RF6052SetOFDMTxPower(
++										IN	PADAPTER	Adapter,
++										IN	u8*		pPowerLevel,
++										IN	u8		Channel);
++int	PHY_RF6052_Config8192C(	IN	PADAPTER		Adapter	);
++
++/*--------------------------Exported Function prototype---------------------*/
++
++
++#endif/* End of HalRf.h */
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192c_spec.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192c_spec.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192c_spec.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192c_spec.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,1865 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __RTL8192C_SPEC_H__
++#define __RTL8192C_SPEC_H__
++
++#include <drv_conf.h>
++
++#ifndef BIT
++#define BIT(x)		(1 << (x))
++#endif
++
++#define BIT0		0x00000001
++#define BIT1		0x00000002
++#define BIT2		0x00000004
++#define BIT3		0x00000008
++#define BIT4		0x00000010
++#define BIT5		0x00000020
++#define BIT6		0x00000040
++#define BIT7		0x00000080
++#define BIT8		0x00000100
++#define BIT9		0x00000200
++#define BIT10	0x00000400
++#define BIT11	0x00000800
++#define BIT12	0x00001000
++#define BIT13	0x00002000
++#define BIT14	0x00004000
++#define BIT15	0x00008000
++#define BIT16	0x00010000
++#define BIT17	0x00020000
++#define BIT18	0x00040000
++#define BIT19	0x00080000
++#define BIT20	0x00100000
++#define BIT21	0x00200000
++#define BIT22	0x00400000
++#define BIT23	0x00800000
++#define BIT24	0x01000000
++#define BIT25	0x02000000
++#define BIT26	0x04000000
++#define BIT27	0x08000000
++#define BIT28	0x10000000
++#define BIT29	0x20000000
++#define BIT30	0x40000000
++#define BIT31	0x80000000
++
++
++//============================================================
++//       8192C Regsiter offset definition
++//============================================================
++
++
++//============================================================
++//
++//============================================================
++
++//-----------------------------------------------------
++//
++//	0x0000h ~ 0x00FFh	System Configuration
++//
++//-----------------------------------------------------
++#define REG_SYS_ISO_CTRL			0x0000
++#define REG_SYS_FUNC_EN			0x0002
++#define REG_APS_FSMCO				0x0004
++#define REG_SYS_CLKR				0x0008
++#define REG_9346CR					0x000A
++#define REG_EE_VPD					0x000C
++#define REG_AFE_MISC				0x0010
++#define REG_SPS0_CTRL				0x0011
++#define REG_SPS_OCP_CFG			0x0018
++#define REG_RSV_CTRL				0x001C
++#define REG_RF_CTRL					0x001F
++#define REG_LDOA15_CTRL			0x0020
++#define REG_LDOV12D_CTRL			0x0021
++#define REG_LDOHCI12_CTRL			0x0022
++#define REG_LPLDO_CTRL				0x0023
++#define REG_AFE_XTAL_CTRL			0x0024
++#define REG_AFE_PLL_CTRL			0x0028
++#define REG_EFUSE_CTRL				0x0030
++#define REG_EFUSE_TEST				0x0034
++#define REG_PWR_DATA				0x0038
++#define REG_CAL_TIMER				0x003C
++#define REG_ACLK_MON				0x003E
++#define REG_GPIO_MUXCFG			0x0040
++#define REG_GPIO_IO_SEL				0x0042
++#define REG_MAC_PINMUX_CFG		0x0043
++#define REG_GPIO_PIN_CTRL			0x0044
++#define REG_GPIO_INTM				0x0048
++#define REG_LEDCFG0					0x004C
++#define REG_LEDCFG1					0x004D
++#define REG_LEDCFG2					0x004E
++#define REG_LEDCFG3					0x004F
++#define REG_LEDCFG					REG_LEDCFG2
++#define REG_FSIMR					0x0050
++#define REG_FSISR					0x0054
++#define REG_HSIMR					0x0058
++#define REG_HSISR					0x005c
++#define REG_GPIO_PIN_CTRL_2		0x0060 // RTL8723 WIFI/BT/GPS Multi-Function GPIO Pin Control.
++#define REG_GPIO_IO_SEL_2			0x0062 // RTL8723 WIFI/BT/GPS Multi-Function GPIO Select.
++#define REG_MULTI_FUNC_CTRL		0x0068 // RTL8723 WIFI/BT/GPS Multi-Function control source.
++#define REG_MCUFWDL				0x0080
++#ifdef CONFIG_WOWLAN
++#define REG_WOWLAN_REASON			0x0081
++#endif //CONFIG_WOWLAN
++#define REG_HMEBOX_EXT_0			0x0088
++#define REG_HMEBOX_EXT_1			0x008A
++#define REG_HMEBOX_EXT_2			0x008C
++#define REG_HMEBOX_EXT_3			0x008E
++#define REG_HOST_SUSP_CNT			0x00BC	// Host suspend counter on FPGA platform
++#define REG_EFUSE_ACCESS			0x00CF	// Efuse access protection for RTL8723
++#define REG_BIST_SCAN				0x00D0
++#define REG_BIST_RPT				0x00D4
++#define REG_BIST_ROM_RPT			0x00D8
++#define REG_USB_SIE_INTF			0x00E0
++#define REG_PCIE_MIO_INTF			0x00E4
++#define REG_PCIE_MIO_INTD			0x00E8
++#define REG_HPON_FSM				0x00EC
++#define REG_SYS_CFG					0x00F0
++#define REG_GPIO_OUTSTS			0x00F4	// For RTL8723 only.
++
++//-----------------------------------------------------
++//
++//	0x0100h ~ 0x01FFh	MACTOP General Configuration
++//
++//-----------------------------------------------------
++#define REG_CR						0x0100
++#define REG_PBP						0x0104
++#define REG_TRXDMA_CTRL			0x010C
++#define REG_TRXFF_BNDY				0x0114
++#define REG_TRXFF_STATUS			0x0118
++#define REG_RXFF_PTR				0x011C
++#define REG_HIMR					0x0120
++#define REG_HISR					0x0124
++#define REG_HIMRE					0x0128
++#define REG_HISRE					0x012C
++#define REG_CPWM					0x012F
++#define REG_FWIMR					0x0130
++#define REG_FWISR					0x0134
++#define REG_PKTBUF_DBG_CTRL		0x0140
++#define REG_PKTBUF_DBG_DATA_L		0x0144
++#define REG_PKTBUF_DBG_DATA_H	0x0148
++
++#define REG_TC0_CTRL				0x0150
++#define REG_TC1_CTRL				0x0154
++#define REG_TC2_CTRL				0x0158
++#define REG_TC3_CTRL				0x015C
++#define REG_TC4_CTRL				0x0160
++#define REG_TCUNIT_BASE			0x0164
++#define REG_MBIST_START			0x0174
++#define REG_MBIST_DONE				0x0178
++#define REG_MBIST_FAIL				0x017C
++#define REG_C2HEVT_MSG_NORMAL	0x01A0
++#define REG_C2HEVT_CLEAR			0x01AF
++#define REG_C2HEVT_MSG_TEST		0x01B8
++#define REG_MCUTST_1				0x01c0
++#define REG_FMETHR					0x01C8
++#define REG_HMETFR					0x01CC
++#define REG_HMEBOX_0				0x01D0
++#define REG_HMEBOX_1				0x01D4
++#define REG_HMEBOX_2				0x01D8
++#define REG_HMEBOX_3				0x01DC
++
++#define REG_LLT_INIT				0x01E0
++#define REG_BB_ACCEESS_CTRL		0x01E8
++#define REG_BB_ACCESS_DATA		0x01EC
++
++
++//-----------------------------------------------------
++//
++//	0x0200h ~ 0x027Fh	TXDMA Configuration
++//
++//-----------------------------------------------------
++#define REG_RQPN					0x0200
++#define REG_FIFOPAGE				0x0204
++#define REG_TDECTRL					0x0208
++#define REG_TXDMA_OFFSET_CHK		0x020C
++#define REG_TXDMA_STATUS			0x0210
++#define REG_RQPN_NPQ				0x0214
++
++//-----------------------------------------------------
++//
++//	0x0280h ~ 0x02FFh	RXDMA Configuration
++//
++//-----------------------------------------------------
++#define REG_RXDMA_AGG_PG_TH		0x0280
++#define REG_RXPKT_NUM				0x0284
++#define REG_RXDMA_STATUS			0x0288
++
++
++//-----------------------------------------------------
++//
++//	0x0300h ~ 0x03FFh	PCIe
++//
++//-----------------------------------------------------
++#define	REG_PCIE_CTRL_REG			0x0300
++#define	REG_INT_MIG				0x0304	// Interrupt Migration 
++#define	REG_BCNQ_DESA				0x0308	// TX Beacon Descriptor Address
++#define	REG_HQ_DESA				0x0310	// TX High Queue Descriptor Address
++#define	REG_MGQ_DESA				0x0318	// TX Manage Queue Descriptor Address
++#define	REG_VOQ_DESA				0x0320	// TX VO Queue Descriptor Address
++#define	REG_VIQ_DESA				0x0328	// TX VI Queue Descriptor Address
++#define	REG_BEQ_DESA				0x0330	// TX BE Queue Descriptor Address
++#define	REG_BKQ_DESA				0x0338	// TX BK Queue Descriptor Address
++#define	REG_RX_DESA				0x0340	// RX Queue	Descriptor Address
++#define	REG_DBI					0x0348	// Backdoor REG for Access Configuration
++#define	REG_MDIO					0x0354	// MDIO for Access PCIE PHY
++#define	REG_DBG_SEL				0x0360	// Debug Selection Register
++#define	REG_PCIE_HRPWM			0x0361	//PCIe RPWM
++#define	REG_PCIE_HCPWM			0x0363	//PCIe CPWM
++#define	REG_UART_CTRL				0x0364	// UART	Control
++#define	REG_UART_TX_DESA			0x0370	// UART TX Descriptor Address
++#define	REG_UART_RX_DESA			0x0378	// UART Rx Descriptor Address
++
++
++// spec version 11
++//-----------------------------------------------------
++//
++//	0x0400h ~ 0x047Fh	Protocol Configuration
++//
++//-----------------------------------------------------
++#define REG_VOQ_INFORMATION			0x0400
++#define REG_VIQ_INFORMATION			0x0404
++#define REG_BEQ_INFORMATION			0x0408
++#define REG_BKQ_INFORMATION			0x040C
++#define REG_MGQ_INFORMATION			0x0410
++#define REG_HGQ_INFORMATION			0x0414
++#define REG_BCNQ_INFORMATION			0x0418
++
++
++#define REG_CPU_MGQ_INFORMATION		0x041C
++#define REG_FWHW_TXQ_CTRL				0x0420
++#define REG_HWSEQ_CTRL					0x0423
++#define REG_TXPKTBUF_BCNQ_BDNY		0x0424
++#define REG_TXPKTBUF_MGQ_BDNY		0x0425
++#define REG_LIFETIME_EN				0x0426
++#define REG_MULTI_BCNQ_OFFSET			0x0427
++#define REG_SPEC_SIFS					0x0428
++#define REG_RL							0x042A
++#define REG_DARFRC						0x0430
++#define REG_RARFRC						0x0438
++#define REG_RRSR						0x0440
++#define REG_ARFR0						0x0444
++#define REG_ARFR1						0x0448
++#define REG_ARFR2						0x044C
++#define REG_ARFR3						0x0450
++#define REG_AGGLEN_LMT					0x0458
++#define REG_AMPDU_MIN_SPACE			0x045C
++#define REG_TXPKTBUF_WMAC_LBK_BF_HD	0x045D
++#define REG_FAST_EDCA_CTRL				0x0460
++#define REG_RD_RESP_PKT_TH				0x0463
++#define REG_INIRTS_RATE_SEL			0x0480
++#define REG_INIDATA_RATE_SEL			0x0484
++
++//#define REG_FW_TSF_SYNC_CNT				0x04A0
++#define REG_FW_RESET_TSF_CNT_1				0x05FC
++#define REG_FW_RESET_TSF_CNT_0				0x05FD
++#define REG_FW_BCN_DIS_CNT				0x05FE
++
++#define REG_POWER_STATUS				0x04A4
++#define REG_POWER_STAGE1				0x04B4
++#define REG_POWER_STAGE2				0x04B8
++#define REG_PKT_VO_VI_LIFE_TIME		0x04C0
++#define REG_PKT_BE_BK_LIFE_TIME		0x04C2
++#define REG_STBC_SETTING				0x04C4
++#define REG_PROT_MODE_CTRL			0x04C8
++#define REG_MAX_AGGR_NUM				0x04CA
++#define REG_RTS_MAX_AGGR_NUM			0x04CB
++#define REG_BAR_MODE_CTRL				0x04CC
++#define REG_RA_TRY_RATE_AGG_LMT		0x04CF
++#define REG_NQOS_SEQ					0x04DC
++#define REG_QOS_SEQ					0x04DE
++#define REG_NEED_CPU_HANDLE			0x04E0
++#define REG_PKT_LOSE_RPT				0x04E1
++#define REG_PTCL_ERR_STATUS			0x04E2
++#define REG_DUMMY						0x04FC
++
++
++
++//-----------------------------------------------------
++//
++//	0x0500h ~ 0x05FFh	EDCA Configuration
++//
++//-----------------------------------------------------
++#define REG_EDCA_VO_PARAM			0x0500
++#define REG_EDCA_VI_PARAM			0x0504
++#define REG_EDCA_BE_PARAM			0x0508
++#define REG_EDCA_BK_PARAM			0x050C
++#define REG_BCNTCFG					0x0510
++#define REG_PIFS						0x0512
++#define REG_RDG_PIFS				0x0513
++#define REG_SIFS_CCK				0x0514
++#define REG_SIFS_OFDM				0x0516
++#define REG_SIFS_CTX				0x0514
++#define REG_SIFS_TRX				0x0516
++#define REG_TSFTR_SYN_OFFSET		0x0518
++#define REG_AGGR_BREAK_TIME		0x051A
++#define REG_SLOT					0x051B
++#define REG_TX_PTCL_CTRL			0x0520
++#define REG_TXPAUSE					0x0522
++#define REG_DIS_TXREQ_CLR			0x0523
++#define REG_RD_CTRL					0x0524
++#define REG_TBTT_PROHIBIT			0x0540
++#define REG_RD_NAV_NXT				0x0544
++#define REG_NAV_PROT_LEN			0x0546
++#define REG_BCN_CTRL				0x0550
++#define REG_BCN_CTRL_1				0x0551
++#define REG_MBID_NUM				0x0552
++#define REG_DUAL_TSF_RST			0x0553
++#define REG_BCN_INTERVAL			0x0554	// The same as REG_MBSSID_BCN_SPACE
++#define REG_MBSSID_BCN_SPACE		0x0554
++#define REG_DRVERLYINT				0x0558
++#define REG_BCNDMATIM				0x0559
++#define REG_ATIMWND				0x055A
++#define REG_BCN_MAX_ERR			0x055D
++#define REG_RXTSF_OFFSET_CCK		0x055E
++#define REG_RXTSF_OFFSET_OFDM		0x055F	
++#define REG_TSFTR					0x0560
++#define REG_TSFTR1					0x0568
++#define REG_INIT_TSFTR				0x0564
++#define REG_ATIMWND_1				0x0570
++#define REG_PSTIMER					0x0580
++#define REG_TIMER0					0x0584
++#define REG_TIMER1					0x0588
++#define REG_ACMHWCTRL				0x05C0
++#define REG_ACMRSTCTRL				0x05C1
++#define REG_ACMAVG					0x05C2
++#define REG_VO_ADMTIME				0x05C4
++#define REG_VI_ADMTIME				0x05C6
++#define REG_BE_ADMTIME				0x05C8
++#define REG_EDCA_RANDOM_GEN		0x05CC
++#define REG_SCH_TXCMD				0x05D0
++
++
++//-----------------------------------------------------
++//
++//	0x0600h ~ 0x07FFh	WMAC Configuration
++//
++//-----------------------------------------------------
++#define REG_APSD_CTRL				0x0600
++#define REG_BWOPMODE				0x0603
++#define REG_TCR						0x0604
++#define REG_RCR						0x0608
++#define REG_RX_PKT_LIMIT			0x060C
++#define REG_RX_DLK_TIME			0x060D
++#define REG_RX_DRVINFO_SZ			0x060F
++
++#define REG_MACID					0x0610
++#define REG_BSSID					0x0618
++#define REG_MAR						0x0620
++#define REG_MBIDCAMCFG				0x0628
++
++#define REG_USTIME_EDCA			0x0638
++#define REG_MAC_SPEC_SIFS			0x063A
++
++// 20100719 Joseph: Hardware register definition change. (HW datasheet v54)
++#define REG_R2T_SIFS				0x063C	// [15:8]SIFS_R2T_OFDM, [7:0]SIFS_R2T_CCK
++#define REG_T2T_SIFS				0x063E	// [15:8]SIFS_T2T_OFDM, [7:0]SIFS_T2T_CCK
++#define REG_ACKTO					0x0640
++#define REG_CTS2TO					0x0641
++#define REG_EIFS						0x0642
++
++//WMA, BA, CCX
++#define REG_NAV_CTRL				0x0650
++#define REG_BACAMCMD				0x0654
++#define REG_BACAMCONTENT			0x0658
++#define REG_LBDLY					0x0660
++#define REG_FWDLY					0x0661
++#define REG_RXERR_RPT				0x0664
++#define REG_WMAC_TRXPTCL_CTL		0x0668
++
++
++// Security
++#define REG_CAMCMD					0x0670
++#define REG_CAMWRITE				0x0674
++#define REG_CAMREAD				0x0678
++#define REG_CAMDBG					0x067C
++#define REG_SECCFG					0x0680
++
++// Power
++#define REG_WOW_CTRL				0x0690
++#define REG_PSSTATUS				0x0691
++#define REG_PS_RX_INFO				0x0692
++#define REG_LPNAV_CTRL				0x0694
++#define REG_WKFMCAM_CMD			0x0698
++#define REG_WKFMCAM_RWD			0x069C
++#define REG_RXFLTMAP0				0x06A0
++#define REG_RXFLTMAP1				0x06A2
++#define REG_RXFLTMAP2				0x06A4
++#define REG_BCN_PSR_RPT			0x06A8
++#define REG_CALB32K_CTRL			0x06AC
++#define REG_PKT_MON_CTRL			0x06B4
++#define REG_BT_COEX_TABLE			0x06C0
++#define REG_WMAC_RESP_TXINFO		0x06D8
++
++#define REG_MACID1					0x0700
++#define REG_BSSID1					0x0708
++
++
++//-----------------------------------------------------
++//
++//	0xFE00h ~ 0xFE55h	USB Configuration
++//
++//-----------------------------------------------------
++#define REG_USB_INFO				0xFE17
++#define REG_USB_SPECIAL_OPTION	0xFE55
++#define REG_USB_DMA_AGG_TO		0xFE5B
++#define REG_USB_AGG_TO				0xFE5C
++#define REG_USB_AGG_TH				0xFE5D
++
++// For test chip
++#define REG_TEST_USB_TXQS			0xFE48
++#define REG_TEST_SIE_VID			0xFE60		// 0xFE60~0xFE61
++#define REG_TEST_SIE_PID			0xFE62		// 0xFE62~0xFE63
++#define REG_TEST_SIE_OPTIONAL		0xFE64
++#define REG_TEST_SIE_CHIRP_K		0xFE65
++#define REG_TEST_SIE_PHY			0xFE66		// 0xFE66~0xFE6B
++#define REG_TEST_SIE_MAC_ADDR		0xFE70		// 0xFE70~0xFE75
++#define REG_TEST_SIE_STRING		0xFE80		// 0xFE80~0xFEB9
++
++
++// For normal chip
++#define REG_NORMAL_SIE_VID			0xFE60		// 0xFE60~0xFE61
++#define REG_NORMAL_SIE_PID			0xFE62		// 0xFE62~0xFE63
++#define REG_NORMAL_SIE_OPTIONAL	0xFE64
++#define REG_NORMAL_SIE_EP			0xFE65		// 0xFE65~0xFE67
++#define REG_NORMAL_SIE_PHY		0xFE68		// 0xFE68~0xFE6B
++#define REG_NORMAL_SIE_OPTIONAL2	0xFE6C
++#define REG_NORMAL_SIE_GPS_EP		0xFE6D		// 0xFE6D, for RTL8723 only.
++#define REG_NORMAL_SIE_MAC_ADDR	0xFE70		// 0xFE70~0xFE75
++#define REG_NORMAL_SIE_STRING		0xFE80		// 0xFE80~0xFEDF
++
++
++//-----------------------------------------------------
++//
++//	Redifine 8192C register definition for compatibility
++//
++//-----------------------------------------------------
++
++// TODO: use these definition when using REG_xxx naming rule.
++// NOTE: DO NOT Remove these definition. Use later.
++
++#define	SYS_ISO_CTRL				REG_SYS_ISO_CTRL	// System Isolation Interface Control.
++#define	SYS_FUNC_EN				REG_SYS_FUNC_EN		// System Function Enable.
++#define	SYS_CLK						REG_SYS_CLKR
++#define	CR9346						REG_9346CR			// 93C46/93C56 Command Register.
++#define	EFUSE_CTRL					REG_EFUSE_CTRL		// E-Fuse Control.
++#define	EFUSE_TEST					REG_EFUSE_TEST		// E-Fuse Test.
++#define	MSR							(REG_CR + 2)		// Media Status register
++#define	ISR							REG_HISR
++#define	TSFR						REG_TSFTR			// Timing Sync Function Timer Register.
++
++#define	MACIDR0					REG_MACID			// MAC ID Register, Offset 0x0050-0x0053
++#define	MACIDR4					(REG_MACID + 4)		// MAC ID Register, Offset 0x0054-0x0055
++
++#define	PBP							REG_PBP
++
++// Redifine MACID register, to compatible prior ICs.
++#define	IDR0						MACIDR0
++#define	IDR4						MACIDR4
++
++
++//
++// 9. Security Control Registers	(Offset: )
++//
++#define	RWCAM						REG_CAMCMD		//IN 8190 Data Sheet is called CAMcmd
++#define	WCAMI						REG_CAMWRITE	// Software write CAM input content
++#define	RCAMO						REG_CAMREAD		// Software read/write CAM config
++#define	CAMDBG						REG_CAMDBG
++#define	SECR						REG_SECCFG		//Security Configuration Register
++
++// Unused register
++#define	UnusedRegister				0x1BF
++#define	DCAM						UnusedRegister
++#define	PSR							UnusedRegister
++#define	BBAddr						UnusedRegister
++#define	PhyDataR					UnusedRegister
++
++#define	InvalidBBRFValue			0x12345678
++
++// Min Spacing related settings.
++#define	MAX_MSS_DENSITY_2T 			0x13
++#define	MAX_MSS_DENSITY_1T 			0x0A
++
++//----------------------------------------------------------------------------
++//       8192C Cmd9346CR bits					(Offset 0xA, 16bit)
++//----------------------------------------------------------------------------
++#define	CmdEEPROM_En				BIT5	 // EEPROM enable when set 1
++#define	CmdEERPOMSEL				BIT4 	// System EEPROM select, 0: boot from E-FUSE, 1: The EEPROM used is 9346
++#define	Cmd9346CR_9356SEL			BIT4
++#define	AutoLoadEEPROM			(CmdEEPROM_En|CmdEERPOMSEL)
++#define	AutoLoadEFUSE				CmdEEPROM_En
++
++//----------------------------------------------------------------------------
++//       8192C GPIO MUX Configuration Register (offset 0x40, 4 byte)
++//----------------------------------------------------------------------------
++#define	GPIOSEL_GPIO				0
++#define	GPIOSEL_ENBT				BIT5
++
++//----------------------------------------------------------------------------
++//       8192C GPIO PIN Control Register (offset 0x44, 4 byte)
++//----------------------------------------------------------------------------
++#define	GPIO_IN						REG_GPIO_PIN_CTRL		// GPIO pins input value
++#define	GPIO_OUT					(REG_GPIO_PIN_CTRL+1)	// GPIO pins output value
++#define	GPIO_IO_SEL				(REG_GPIO_PIN_CTRL+2)	// GPIO pins output enable when a bit is set to "1"; otherwise, input is configured.
++#define	GPIO_MOD					(REG_GPIO_PIN_CTRL+3)
++
++//----------------------------------------------------------------------------
++//       8192C (MSR) Media Status Register	(Offset 0x4C, 8 bits)  
++//----------------------------------------------------------------------------
++/*
++Network Type
++00: No link
++01: Link in ad hoc network
++10: Link in infrastructure network
++11: AP mode
++Default: 00b.
++*/
++#define	MSR_NOLINK					0x00
++#define	MSR_ADHOC					0x01
++#define	MSR_INFRA					0x02
++#define	MSR_AP						0x03
++
++//
++// 6. Adaptive Control Registers  (Offset: 0x0160 - 0x01CF)
++//
++//----------------------------------------------------------------------------
++//       8192C Response Rate Set Register	(offset 0x181, 24bits)
++//----------------------------------------------------------------------------
++#define	RRSR_RSC_OFFSET			21
++#define	RRSR_SHORT_OFFSET			23
++#define	RRSR_RSC_BW_40M			0x600000
++#define	RRSR_RSC_UPSUBCHNL		0x400000
++#define	RRSR_RSC_LOWSUBCHNL		0x200000
++#define	RRSR_SHORT					0x800000
++#define	RRSR_1M					BIT0
++#define	RRSR_2M					BIT1 
++#define	RRSR_5_5M					BIT2 
++#define	RRSR_11M					BIT3 
++#define	RRSR_6M					BIT4 
++#define	RRSR_9M					BIT5 
++#define	RRSR_12M					BIT6 
++#define	RRSR_18M					BIT7 
++#define	RRSR_24M					BIT8 
++#define	RRSR_36M					BIT9 
++#define	RRSR_48M					BIT10 
++#define	RRSR_54M					BIT11
++#define	RRSR_MCS0					BIT12
++#define	RRSR_MCS1					BIT13
++#define	RRSR_MCS2					BIT14
++#define	RRSR_MCS3					BIT15
++#define	RRSR_MCS4					BIT16
++#define	RRSR_MCS5					BIT17
++#define	RRSR_MCS6					BIT18
++#define	RRSR_MCS7					BIT19
++#define	BRSR_AckShortPmb			BIT23	
++// CCK ACK: use Short Preamble or not
++
++
++//----------------------------------------------------------------------------
++//       8192C Rate Definition
++//----------------------------------------------------------------------------
++//CCK
++#define	RATR_1M					0x00000001
++#define	RATR_2M					0x00000002
++#define	RATR_55M					0x00000004
++#define	RATR_11M					0x00000008
++//OFDM 		
++#define	RATR_6M					0x00000010
++#define	RATR_9M					0x00000020
++#define	RATR_12M					0x00000040
++#define	RATR_18M					0x00000080
++#define	RATR_24M					0x00000100
++#define	RATR_36M					0x00000200
++#define	RATR_48M					0x00000400
++#define	RATR_54M					0x00000800
++//MCS 1 Spatial Stream	
++#define	RATR_MCS0					0x00001000
++#define	RATR_MCS1					0x00002000
++#define	RATR_MCS2					0x00004000
++#define	RATR_MCS3					0x00008000
++#define	RATR_MCS4					0x00010000
++#define	RATR_MCS5					0x00020000
++#define	RATR_MCS6					0x00040000
++#define	RATR_MCS7					0x00080000
++//MCS 2 Spatial Stream
++#define	RATR_MCS8					0x00100000
++#define	RATR_MCS9					0x00200000
++#define	RATR_MCS10					0x00400000
++#define	RATR_MCS11					0x00800000
++#define	RATR_MCS12					0x01000000
++#define	RATR_MCS13					0x02000000
++#define	RATR_MCS14					0x04000000
++#define	RATR_MCS15					0x08000000
++
++//----------------------------------------------------------------------------
++//       8192C BW_OPMODE bits					(Offset 0x203, 8bit)
++//----------------------------------------------------------------------------
++#define	BW_OPMODE_20MHZ			BIT2
++#define	BW_OPMODE_5G				BIT1
++#define	BW_OPMODE_11J				BIT0
++
++
++//----------------------------------------------------------------------------
++//       8192C CAM Config Setting (offset 0x250, 1 byte)
++//----------------------------------------------------------------------------
++#define	CAM_VALID					BIT15
++#define	CAM_NOTVALID				0x0000
++#define	CAM_USEDK					BIT5
++
++#define	CAM_CONTENT_COUNT 		8
++       	       		
++#define	CAM_NONE					0x0
++#define	CAM_WEP40					0x01
++#define	CAM_TKIP					0x02
++#define	CAM_AES					0x04
++#define	CAM_WEP104				0x05
++        		
++#define	TOTAL_CAM_ENTRY			32
++#define	HALF_CAM_ENTRY			16	
++       		
++#define	CAM_CONFIG_USEDK			_TRUE
++#define	CAM_CONFIG_NO_USEDK		_FALSE
++       		
++#define	CAM_WRITE					BIT16
++#define	CAM_READ					0x00000000
++#define	CAM_POLLINIG				BIT31
++
++#define	SCR_UseDK					0x01
++#define	SCR_TxSecEnable			0x02
++#define	SCR_RxSecEnable			0x04
++
++
++//
++// 12. Host Interrupt Status Registers	 (Offset: 0x0300 - 0x030F)
++//
++//----------------------------------------------------------------------------
++//       8190 IMR/ISR bits						(offset 0xfd,  8bits)
++//----------------------------------------------------------------------------
++#define	IMR8190_DISABLED				0x0
++// IMR DW0 Bit 0-31
++#define	IMR_BCNDMAINT6				BIT31		// Beacon DMA Interrupt 6
++#define	IMR_BCNDMAINT5				BIT30		// Beacon DMA Interrupt 5
++#define	IMR_BCNDMAINT4				BIT29		// Beacon DMA Interrupt 4
++#define	IMR_BCNDMAINT3				BIT28		// Beacon DMA Interrupt 3
++#define	IMR_BCNDMAINT2				BIT27		// Beacon DMA Interrupt 2
++#define	IMR_BCNDMAINT1				BIT26		// Beacon DMA Interrupt 1
++#define	IMR_BCNDOK8					BIT25		// Beacon Queue DMA OK Interrup 8
++#define	IMR_BCNDOK7					BIT24		// Beacon Queue DMA OK Interrup 7
++#define	IMR_BCNDOK6					BIT23		// Beacon Queue DMA OK Interrup 6
++#define	IMR_BCNDOK5					BIT22		// Beacon Queue DMA OK Interrup 5
++#define	IMR_BCNDOK4					BIT21		// Beacon Queue DMA OK Interrup 4
++#define	IMR_BCNDOK3					BIT20		// Beacon Queue DMA OK Interrup 3
++#define	IMR_BCNDOK2					BIT19		// Beacon Queue DMA OK Interrup 2
++#define	IMR_BCNDOK1					BIT18		// Beacon Queue DMA OK Interrup 1
++#define	IMR_TIMEOUT2					BIT17		// Timeout interrupt 2
++#define	IMR_TIMEOUT1					BIT16		// Timeout interrupt 1
++#define	IMR_TXFOVW					BIT15		// Transmit FIFO Overflow
++#define	IMR_PSTIMEOUT					BIT14		// Power save time out interrupt 
++#define	IMR_BcnInt						BIT13		// Beacon DMA Interrupt 0
++#define	IMR_RXFOVW					BIT12		// Receive FIFO Overflow
++#define	IMR_RDU						BIT11		// Receive Descriptor Unavailable
++#define	IMR_ATIMEND					BIT10		// For 92C,ATIM Window End Interrupt
++#define	IMR_BDOK						BIT9		// Beacon Queue DMA OK Interrup
++#define	IMR_HIGHDOK					BIT8		// High Queue DMA OK Interrupt
++#define	IMR_TBDOK						BIT7		// Transmit Beacon OK interrup
++#define	IMR_MGNTDOK					BIT6		// Management Queue DMA OK Interrupt
++#define	IMR_TBDER						BIT5		// For 92C,Transmit Beacon Error Interrupt
++#define	IMR_BKDOK						BIT4		// AC_BK DMA OK Interrupt
++#define	IMR_BEDOK						BIT3		// AC_BE DMA OK Interrupt
++#define	IMR_VIDOK						BIT2		// AC_VI DMA OK Interrupt
++#define	IMR_VODOK						BIT1		// AC_VO DMA Interrupt
++#define	IMR_ROK						BIT0		// Receive DMA OK Interrupt
++
++#define	IMR_RX_MASK		(IMR_ROK|IMR_RDU|IMR_RXFOVW)
++#define	IMR_TX_MASK		(IMR_VODOK|IMR_VIDOK|IMR_BEDOK|IMR_BKDOK|IMR_MGNTDOK|IMR_HIGHDOK|IMR_BDOK)
++
++// 13. Host Interrupt Status Extension Register	 (Offset: 0x012C-012Eh)
++#define	IMR_BcnInt_E				BIT12
++#define	IMR_TXERR				BIT11
++#define	IMR_RXERR				BIT10
++#define	IMR_C2HCMD			BIT9
++#define	IMR_CPWM				BIT8
++//RSVD [2-7]
++#define	IMR_OCPINT				BIT1
++#define	IMR_WLANOFF			BIT0
++
++
++
++//----------------------------------------------------------------------------
++// 8192C EFUSE
++//----------------------------------------------------------------------------
++#define	HWSET_MAX_SIZE				128
++
++
++//----------------------------------------------------------------------------
++//       8192C EEPROM/EFUSE share register definition.
++//----------------------------------------------------------------------------
++
++//
++// Default Value for EEPROM or EFUSE!!!
++//
++#define EEPROM_Default_TSSI					0x0
++#define EEPROM_Default_TxPowerDiff			0x0
++#define EEPROM_Default_CrystalCap			0x5
++#define EEPROM_Default_BoardType			0x02 // Default: 2X2, RTL8192CE(QFPN68)
++#define EEPROM_Default_TxPower				0x1010
++#define EEPROM_Default_HT2T_TxPwr			0x10
++
++#define EEPROM_Default_LegacyHTTxPowerDiff	0x3
++#define EEPROM_Default_ThermalMeter			0x12
++
++#define EEPROM_Default_AntTxPowerDiff		0x0
++#define EEPROM_Default_TxPwDiff_CrystalCap	0x5
++#define EEPROM_Default_TxPowerLevel		0x22
++#define EEPROM_Default_HT40_2SDiff			0x0
++#define EEPROM_Default_HT20_Diff			2	// HT20<->40 default Tx Power Index Difference
++#define EEPROM_Default_LegacyHTTxPowerDiff	0x3
++#define EEPROM_Default_HT40_PwrMaxOffset	0
++#define EEPROM_Default_HT20_PwrMaxOffset	0
++
++// For debug
++#define EEPROM_Default_PID					0x1234
++#define EEPROM_Default_VID					0x5678
++#define EEPROM_Default_CustomerID			0xAB
++#define EEPROM_Default_SubCustomerID		0xCD
++#define EEPROM_Default_Version				0
++
++#define EEPROM_CHANNEL_PLAN_FCC				0x0
++#define EEPROM_CHANNEL_PLAN_IC				0x1
++#define EEPROM_CHANNEL_PLAN_ETSI				0x2
++#define EEPROM_CHANNEL_PLAN_SPAIN			0x3
++#define EEPROM_CHANNEL_PLAN_FRANCE			0x4
++#define EEPROM_CHANNEL_PLAN_MKK				0x5
++#define EEPROM_CHANNEL_PLAN_MKK1				0x6
++#define EEPROM_CHANNEL_PLAN_ISRAEL			0x7
++#define EEPROM_CHANNEL_PLAN_TELEC			0x8
++#define EEPROM_CHANNEL_PLAN_GLOBAL_DOMAIN	0x9
++#define EEPROM_CHANNEL_PLAN_WORLD_WIDE_13	0xA
++#define EEPROM_CHANNEL_PLAN_NCC				0xB
++#define EEPROM_USB_OPTIONAL1					0xE
++#define EEPROM_CHANNEL_PLAN_BY_HW_MASK		0x80
++
++
++#define EEPROM_CID_DEFAULT				0x0
++#define EEPROM_CID_TOSHIBA					0x4
++#define EEPROM_CID_CCX						0x10 // CCX test. By Bruce, 2009-02-25.
++#define EEPROM_CID_QMI						0x0D
++#define EEPROM_CID_WHQL 					0xFE // added by chiyoko for dtm, 20090108
++
++
++#define	RTL_EEPROM_ID						0x8129
++
++
++#ifdef CONFIG_PCI_HCI
++#define RT_IBSS_INT_MASKS				(IMR_BcnInt | IMR_TBDOK | IMR_TBDER)
++#define RT_AC_INT_MASKS				(IMR_VIDOK | IMR_VODOK | IMR_BEDOK|IMR_BKDOK)
++#define RT_BSS_INT_MASKS				(RT_IBSS_INT_MASKS)
++
++//
++// Interface type.
++//
++typedef	enum _INTERFACE_SELECT_8192CPCIe{
++	INTF_SEL0_SOLO_MINICARD			= 0,		// WiFi solo-mCard
++	INTF_SEL1_BT_COMBO_MINICARD		= 1,		// WiFi+BT combo-mCard
++	INTF_SEL2_PCIe					= 2,		// PCIe Card
++} INTERFACE_SELECT_8192CPCIe, *PINTERFACE_SELECT_8192CPCIe;
++
++#define RTL8190_EEPROM_ID					0x8129	// 0-1
++#define EEPROM_HPON						0x02 // LDO settings.2-5
++#define EEPROM_CLK							0x06 // Clock settings.6-7
++#define EEPROM_TESTR						0x08 // SE Test mode.8
++
++#define EEPROM_VID							0x0A // SE Vendor ID.A-B
++#define EEPROM_DID							0x0C // SE Device ID. C-D
++#define EEPROM_SVID							0x0E // SE Vendor ID.E-F
++#define EEPROM_SMID						0x10 // SE PCI Subsystem ID. 10-11
++
++#define EEPROM_MAC_ADDR					0x16 // SEMAC Address. 12-17
++
++//----------------------------------------------------------------
++// Ziv - Let PCIe and USB use the same define. Modify address mapping later.
++#define EEPROM_CCK_TX_PWR_INX					0x5A
++#define EEPROM_HT40_1S_TX_PWR_INX			0x60
++#define EEPROM_HT40_2S_TX_PWR_INX_DIFF		0x66
++#define EEPROM_HT20_TX_PWR_INX_DIFF			0x69
++#define EEPROM_OFDM_TX_PWR_INX_DIFF			0x6C
++#define EEPROM_HT40_MAX_PWR_OFFSET			0x6F
++#define EEPROM_HT20_MAX_PWR_OFFSET			0x72
++
++#define EEPROM_CHANNEL_PLAN 				0x75
++#define EEPROM_TSSI_A						0x76
++#define EEPROM_TSSI_B						0x77
++#define EEPROM_THERMAL_METER				0x78
++#define EEPROM_RF_OPT1						0x79
++#define EEPROM_RF_OPT2						0x7A
++#define EEPROM_RF_OPT3						0x7B
++#define EEPROM_RF_OPT4						0x7C
++#define EEPROM_VERSION						0x7E
++#define EEPROM_CUSTOMER_ID				0x7F
++
++#define EEPROM_NORMAL_BoardType			EEPROM_RF_OPT1	//[7:5]
++
++#endif 
++
++#ifdef CONFIG_USB_HCI
++
++//should be renamed and moved to another file
++typedef	enum _BOARD_TYPE_8192CUSB{
++	BOARD_USB_DONGLE 			= 0,		// USB dongle
++	BOARD_USB_High_PA 		= 1,		// USB dongle with high power PA
++	BOARD_MINICARD		  	= 2,		// Minicard
++	BOARD_USB_SOLO 		 	= 3,		// USB solo-Slim module
++	BOARD_USB_COMBO			= 4,		// USB Combo-Slim module
++} BOARD_TYPE_8192CUSB, *PBOARD_TYPE_8192CUSB;
++
++#define	SUPPORT_HW_RADIO_DETECT(pHalData)	(pHalData->BoardType == BOARD_MINICARD||\
++													pHalData->BoardType == BOARD_USB_SOLO||\
++													pHalData->BoardType == BOARD_USB_COMBO)
++
++//---------------------------------------------------------------
++// EEPROM address for Test chip
++//---------------------------------------------------------------
++#define EEPROM_TEST_USB_OPT						0x0E
++#define EEPROM_TEST_CHIRP_K						0x0F
++#define EEPROM_TEST_EP_SETTING					0x0E
++#define EEPROM_TEST_USB_PHY						0x10
++
++
++//---------------------------------------------------------------
++// EEPROM address for Normal chip
++//---------------------------------------------------------------
++#define EEPROM_NORMAL_USB_OPT					0x0E
++#define EEPROM_NORMAL_CHIRP_K						0x0E	// Changed
++#define EEPROM_NORMAL_EP_SETTING					0x0F	// Changed
++#define EEPROM_NORMAL_USB_PHY					0x12	// Changed
++
++
++// Test chip and normal chip common define
++//---------------------------------------------------------------
++// EEPROM address for both
++//---------------------------------------------------------------
++#define EEPROM_ID0								0x00
++#define EEPROM_ID1								0x01
++#define EEPROM_RTK_RSV1						0x02
++#define EEPROM_RTK_RSV2						0x03
++#define EEPROM_RTK_RSV3						0x04
++#define EEPROM_RTK_RSV4						0x05
++#define EEPROM_RTK_RSV5						0x06
++#define EEPROM_DBG_SEL							0x07
++#define EEPROM_RTK_RSV6						0x08
++#define EEPROM_VID								0x0A
++#define EEPROM_PID								0x0C
++
++#define EEPROM_MAC_ADDR						0x16
++#define EEPROM_STRING							0x1C
++#define EEPROM_SUBCUSTOMER_ID					0x59
++#define EEPROM_CCK_TX_PWR_INX					0x5A
++#define EEPROM_HT40_1S_TX_PWR_INX			0x60
++#define EEPROM_HT40_2S_TX_PWR_INX_DIFF		0x66
++#define EEPROM_HT20_TX_PWR_INX_DIFF			0x69
++#define EEPROM_OFDM_TX_PWR_INX_DIFF			0x6C
++#define EEPROM_HT40_MAX_PWR_OFFSET			0x6F
++#define EEPROM_HT20_MAX_PWR_OFFSET			0x72
++
++#define EEPROM_CHANNEL_PLAN					0x75
++#define EEPROM_TSSI_A							0x76
++#define EEPROM_TSSI_B							0x77
++#define EEPROM_THERMAL_METER					0x78
++#define EEPROM_RF_OPT1							0x79
++#define EEPROM_RF_OPT2							0x7A
++#define EEPROM_RF_OPT3							0x7B
++#define EEPROM_RF_OPT4							0x7C
++#define EEPROM_VERSION							0x7E
++#define EEPROM_CUSTOMER_ID					0x7F
++
++#define EEPROM_BoardType						0x54 //0x0: RTL8188SU, 0x1: RTL8191SU, 0x2: RTL8192SU, 0x3: RTL8191GU
++#define EEPROM_TxPwIndex						0x5C //0x5C-0x76, Tx Power index.
++#define EEPROM_PwDiff							0x67 // Difference of gain index between legacy and high throughput OFDM.
++
++#define EEPROM_TxPowerCCK						0x5A // CCK Tx Power
++
++// 2009/02/09 Cosa Add for SD3 requirement 
++#define EEPROM_TX_PWR_HT20_DIFF				0x6e// HT20 Tx Power Index Difference
++#define DEFAULT_HT20_TXPWR_DIFF				2	// HT20<->40 default Tx Power Index Difference
++#define EEPROM_TX_PWR_OFDM_DIFF				0x71// OFDM Tx Power Index Difference
++
++#define EEPROM_TxPWRGroup						0x73// Power diff for channel group
++#define EEPROM_Regulatory						0x79// Check if power safety is need
++
++#define EEPROM_BLUETOOTH_COEXIST				0x7E // 92cu, 0x7E[4]
++#define EEPROM_NORMAL_BoardType				EEPROM_RF_OPT1	//[7:5]
++#define BOARD_TYPE_NORMAL_MASK				0xE0
++#define BOARD_TYPE_TEST_MASK					0x0F
++#define EEPROM_EASY_REPLACEMENT				0x50//BIT0 1 for build-in module, 0 for external dongle
++//-------------------------------------------------------------
++//	EEPROM content definitions
++//-------------------------------------------------------------
++#define OS_LINK_SPEED							BIT(5)
++
++#define BOARD_TYPE_MASK						0xF
++
++#define BT_COEXISTENCE							BIT(4)
++#define BT_CO_SHIFT								4
++
++#define EP_NUMBER_MASK							0x30	//bit 4:5 0Eh
++#define EP_NUMBER_SHIFT						4
++
++
++#define USB_PHY_PARA_SIZE						5
++
++
++//-------------------------------------------------------------
++//	EEPROM default value definitions
++//-------------------------------------------------------------
++// Use 0xABCD instead of 0x8192 for debug
++#define EEPROM_DEF_ID_0						0xCD	// Byte 0x00
++#define EEPROM_DEF_ID_1						0xAB	// Byte 0x01
++
++#define EEPROM_DEF_RTK_RSV_A3					0x74	// Byte 0x03
++#define EEPROM_DEF_RTK_RSV_A4					0x6D	// Byte 0x04
++#define EEPROM_DEF_RTK_RSV_A8					0xFF	// Byte 0x08
++
++#define EEPROM_DEF_VID_0						0x0A	// Byte 0x0A
++#define EEPROM_DEF_VID_1						0x0B
++
++#define EEPROM_DEF_PID_0						0x92	// Byte 0x0C
++#define EEPROM_DEF_PID_1						0x81
++
++
++#define EEPROM_TEST_DEF_USB_OPT				0x80	// Byte 0x0E
++#define EEPROM_NORMAL_DEF_USB_OPT			0x00	// Byte 0x0E
++
++#define EEPROM_DEF_CHIRPK						0x15	// Byte 0x0F
++
++#define EEPROM_DEF_USB_PHY_0					0x85	// Byte 0x10
++#define EEPROM_DEF_USB_PHY_1					0x62	// Byte 0x11
++#define EEPROM_DEF_USB_PHY_2					0x9E	// Byte 0x12
++#define EEPROM_DEF_USB_PHY_3					0x06	// Byte 0x13
++
++#define EEPROM_DEF_TSSI_A						0x09	// Byte 0x78
++#define EEPROM_DEF_TSSI_B						0x09	// Byte 0x79
++
++
++#define EEPROM_DEF_THERMAL_METER				0x12	// Byte 0x7A
++
++#define RF_OPTION1					0x79// Check if power safety spec is need
++#define RF_OPTION2					0x7A
++#define RF_OPTION3					0x7B
++#define RF_OPTION4					0x7C
++
++
++#define	EEPROM_USB_SN							BIT(0)
++#define	EEPROM_USB_REMOTE_WAKEUP			BIT(1)
++#define	EEPROM_USB_DEVICE_PWR				BIT(2)
++#define	EEPROM_EP_NUMBER						(BIT(3)|BIT(4))
++
++#if 0
++#define	EEPROM_CHANNEL_PLAN_FCC					0x0
++#define	EEPROM_CHANNEL_PLAN_IC					0x1
++#define	EEPROM_CHANNEL_PLAN_ETSI				0x2
++#define	EEPROM_CHANNEL_PLAN_SPAIN				0x3
++#define	EEPROM_CHANNEL_PLAN_FRANCE				0x4
++#define	EEPROM_CHANNEL_PLAN_MKK					0x5
++#define	EEPROM_CHANNEL_PLAN_MKK1				0x6
++#define	EEPROM_CHANNEL_PLAN_ISRAEL				0x7
++#define	EEPROM_CHANNEL_PLAN_TELEC				0x8
++#define	EEPROM_CHANNEL_PLAN_GLOBAL_DOMAIN		0x9
++#define	EEPROM_CHANNEL_PLAN_WORLD_WIDE_13		0xA
++#define	EEPROM_CHANNEL_PLAN_BY_HW_MASK			0x80
++
++#define	EEPROM_CID_DEFAULT						0x0
++
++#define	EEPROM_CID_WHQL 						0xFE // added by chiyoko for dtm, 20090108
++
++
++#define	EEPROM_CID_CCX							0x10 // CCX test. By Bruce, 2009-02-25.
++#endif
++
++#endif
++
++
++/*===================================================================
++=====================================================================
++Here the register defines are for 92C. When the define is as same with 92C, 
++we will use the 92C's define for the consistency
++So the following defines for 92C is not entire!!!!!!
++=====================================================================
++=====================================================================*/
++/*
++Based on Datasheet V33---090401
++Register Summary
++Current IOREG MAP
++0x0000h ~ 0x00FFh   System Configuration (256 Bytes)
++0x0100h ~ 0x01FFh   MACTOP General Configuration (256 Bytes)
++0x0200h ~ 0x027Fh   TXDMA Configuration (128 Bytes)
++0x0280h ~ 0x02FFh   RXDMA Configuration (128 Bytes)
++0x0300h ~ 0x03FFh   PCIE EMAC Reserved Region (256 Bytes)
++0x0400h ~ 0x04FFh   Protocol Configuration (256 Bytes)
++0x0500h ~ 0x05FFh   EDCA Configuration (256 Bytes)
++0x0600h ~ 0x07FFh   WMAC Configuration (512 Bytes)
++0x2000h ~ 0x3FFFh   8051 FW Download Region (8196 Bytes)
++*/
++
++//----------------------------------------------------------------------------
++//       8192C (RCR) Receive Configuration Register	(Offset 0x608, 32 bits)
++//----------------------------------------------------------------------------
++#define	RCR_APPFCS					BIT31		//WMAC append FCS after pauload
++#define	RCR_APP_MIC				BIT30		//
++#define	RCR_APP_PHYSTS			BIT28//
++#define	RCR_APP_ICV				BIT29       //
++#define	RCR_APP_PHYST_RXFF		BIT28       //
++#define	RCR_APP_BA_SSN			BIT27		//Accept BA SSN
++#define	RCR_ENMBID					BIT24		//Enable Multiple BssId.
++#define	RCR_LSIGEN					BIT23
++#define	RCR_MFBEN					BIT22
++#define	RCR_HTC_LOC_CTRL			BIT14       //MFC<--HTC=1 MFC-->HTC=0
++#define	RCR_AMF					BIT13		//Accept management type frame
++#define	RCR_ACF					BIT12		//Accept control type frame
++#define	RCR_ADF					BIT11		//Accept data type frame
++#define	RCR_AICV					BIT9		//Accept ICV error packet
++#define	RCR_ACRC32					BIT8		//Accept CRC32 error packet 
++#define	RCR_CBSSID_BCN			BIT7		//Accept BSSID match packet (Rx beacon, probe rsp)
++#define	RCR_CBSSID_DATA			BIT6		//Accept BSSID match packet (Data)
++#define	RCR_CBSSID					RCR_CBSSID_DATA		//Accept BSSID match packet
++#define	RCR_APWRMGT				BIT5		//Accept power management packet
++#define	RCR_ADD3					BIT4		//Accept address 3 match packet
++#define	RCR_AB						BIT3		//Accept broadcast packet 
++#define	RCR_AM						BIT2		//Accept multicast packet 
++#define	RCR_APM					BIT1		//Accept physical match packet
++#define	RCR_AAP					BIT0		//Accept all unicast packet 
++#define	RCR_MXDMA_OFFSET			8
++#define	RCR_FIFO_OFFSET			13
++
++
++
++//============================================================================
++//       8192c USB specific Regsiter Offset and Content definition, 
++//       2009.08.18, added by vivi. for merge 92c and 92C into one driver
++//============================================================================
++//#define APS_FSMCO				0x0004  same with 92Ce
++#define RSV_CTRL					0x001C
++#define RD_CTRL					0x0524
++
++//-----------------------------------------------------
++//
++//	0xFE00h ~ 0xFE55h	USB Configuration
++//
++//-----------------------------------------------------
++#define REG_USB_INFO				0xFE17
++#define REG_USB_SPECIAL_OPTION	0xFE55
++#define REG_USB_DMA_AGG_TO		0xFE5B
++#define REG_USB_AGG_TO				0xFE5C
++#define REG_USB_AGG_TH				0xFE5D
++
++#define REG_USB_VID					0xFE60
++#define REG_USB_PID					0xFE62
++#define REG_USB_OPTIONAL			0xFE64
++#define REG_USB_CHIRP_K			0xFE65
++#define REG_USB_PHY					0xFE66
++#define REG_USB_MAC_ADDR			0xFE70
++
++#define REG_USB_HRPWM				0xFE58
++#define REG_USB_HCPWM				0xFE57
++
++#define	InvalidBBRFValue			0x12345678
++
++//============================================================================
++//       8192C Regsiter Bit and Content definition 
++//============================================================================
++//-----------------------------------------------------
++//
++//	0x0000h ~ 0x00FFh	System Configuration
++//
++//-----------------------------------------------------
++
++//2 SPS0_CTRL
++#define SW18_FPWM					BIT(3)
++
++
++//2 SYS_ISO_CTRL
++#define ISO_MD2PP					BIT(0)
++#define ISO_UA2USB					BIT(1)
++#define ISO_UD2CORE					BIT(2)
++#define ISO_PA2PCIE					BIT(3)
++#define ISO_PD2CORE					BIT(4)
++#define ISO_IP2MAC					BIT(5)
++#define ISO_DIOP						BIT(6)
++#define ISO_DIOE						BIT(7)
++#define ISO_EB2CORE					BIT(8)
++#define ISO_DIOR						BIT(9)
++
++#define PWC_EV25V					BIT(14)
++#define PWC_EV12V					BIT(15)
++
++
++//2 SYS_FUNC_EN
++#define FEN_BBRSTB					BIT(0)
++#define FEN_BB_GLB_RSTn			BIT(1)
++#define FEN_USBA					BIT(2)
++#define FEN_UPLL					BIT(3)
++#define FEN_USBD					BIT(4)
++#define FEN_DIO_PCIE				BIT(5)
++#define FEN_PCIEA					BIT(6)
++#define FEN_PPLL						BIT(7)
++#define FEN_PCIED					BIT(8)
++#define FEN_DIOE					BIT(9)
++#define FEN_CPUEN					BIT(10)
++#define FEN_DCORE					BIT(11)
++#define FEN_ELDR					BIT(12)
++#define FEN_DIO_RF					BIT(13)
++#define FEN_HWPDN					BIT(14)
++#define FEN_MREGEN					BIT(15)
++
++//2 APS_FSMCO
++#define PFM_LDALL					BIT(0)
++#define PFM_ALDN					BIT(1)
++#define PFM_LDKP					BIT(2)
++#define PFM_WOWL					BIT(3)
++#define EnPDN						BIT(4)
++#define PDN_PL						BIT(5)
++#define APFM_ONMAC					BIT(8)
++#define APFM_OFF					BIT(9)
++#define APFM_RSM					BIT(10)
++#define AFSM_HSUS					BIT(11)
++#define AFSM_PCIE					BIT(12)
++#define APDM_MAC					BIT(13)
++#define APDM_HOST					BIT(14)
++#define APDM_HPDN					BIT(15)
++#define RDY_MACON					BIT(16)
++#define SUS_HOST					BIT(17)
++#define ROP_ALD						BIT(20)
++#define ROP_PWR						BIT(21)
++#define ROP_SPS						BIT(22)
++#define SOP_MRST					BIT(25)
++#define SOP_FUSE					BIT(26)
++#define SOP_ABG						BIT(27)
++#define SOP_AMB						BIT(28)
++#define SOP_RCK						BIT(29)
++#define SOP_A8M						BIT(30)
++#define XOP_BTCK					BIT(31)
++
++//2 SYS_CLKR
++#define ANAD16V_EN					BIT(0)
++#define ANA8M						BIT(1)
++#define MACSLP						BIT(4)
++#define LOADER_CLK_EN				BIT(5)
++#define _80M_SSC_DIS				BIT(7)
++#define _80M_SSC_EN_HO				BIT(8)
++#define PHY_SSC_RSTB				BIT(9)
++#define SEC_CLK_EN					BIT(10)
++#define MAC_CLK_EN					BIT(11)
++#define SYS_CLK_EN					BIT(12)
++#define RING_CLK_EN					BIT(13)
++
++
++//2 9346CR
++
++
++#define 	EEDO					BIT(0)
++#define 	EEDI					BIT(1)
++#define 	EESK					BIT(2)
++#define 	EECS					BIT(3)
++//#define 	EERPROMSEL			BIT(4)
++//#define 	EEPROM_EN			BIT(5)
++#define		BOOT_FROM_EEPROM		BIT(4)
++#define		EEPROM_EN				BIT(5)
++#define 	EEM0					BIT(6)
++#define 	EEM1					BIT(7)
++
++
++//2 AFE_MISC
++#define AFE_BGEN					BIT(0)
++#define AFE_MBEN					BIT(1)
++#define MAC_ID_EN					BIT(7)
++
++
++//2 SPS0_CTRL
++
++
++//2 SPS_OCP_CFG
++
++
++//2 RSV_CTRL
++#define WLOCK_ALL					BIT(0)
++#define WLOCK_00					BIT(1)
++#define WLOCK_04					BIT(2)
++#define WLOCK_08					BIT(3)
++#define WLOCK_40					BIT(4)
++#define R_DIS_PRST_0				BIT(5)
++#define R_DIS_PRST_1				BIT(6)
++#define LOCK_ALL_EN					BIT(7)
++
++//2 RF_CTRL
++#define RF_EN						BIT(0)
++#define RF_RSTB						BIT(1)
++#define RF_SDMRSTB					BIT(2)
++
++
++
++//2 LDOA15_CTRL
++#define LDA15_EN					BIT(0)
++#define LDA15_STBY					BIT(1)
++#define LDA15_OBUF					BIT(2)
++#define LDA15_REG_VOS				BIT(3)
++#define _LDA15_VOADJ(x)				(((x) & 0x7) << 4)
++
++
++
++//2 LDOV12D_CTRL
++#define LDV12_EN					BIT(0)
++#define LDV12_SDBY					BIT(1)
++#define LPLDO_HSM					BIT(2)
++#define LPLDO_LSM_DIS				BIT(3)
++#define _LDV12_VADJ(x)				(((x) & 0xF) << 4)
++
++
++//2 AFE_XTAL_CTRL
++#define XTAL_EN						BIT(0)
++#define XTAL_BSEL					BIT(1)
++#define _XTAL_BOSC(x)				(((x) & 0x3) << 2)
++#define _XTAL_CADJ(x)				(((x) & 0xF) << 4)
++#define XTAL_GATE_USB				BIT(8)
++#define _XTAL_USB_DRV(x)			(((x) & 0x3) << 9)
++#define XTAL_GATE_AFE				BIT(11)
++#define _XTAL_AFE_DRV(x)			(((x) & 0x3) << 12)
++#define XTAL_RF_GATE				BIT(14)
++#define _XTAL_RF_DRV(x)				(((x) & 0x3) << 15)
++#define XTAL_GATE_DIG				BIT(17)
++#define _XTAL_DIG_DRV(x)			(((x) & 0x3) << 18)
++#define XTAL_BT_GATE				BIT(20)
++#define _XTAL_BT_DRV(x)				(((x) & 0x3) << 21)
++#define _XTAL_GPIO(x)				(((x) & 0x7) << 23)
++
++
++#define CKDLY_AFE					BIT(26)
++#define CKDLY_USB					BIT(27)
++#define CKDLY_DIG					BIT(28)
++#define CKDLY_BT					BIT(29)
++
++
++//2 AFE_PLL_CTRL
++#define APLL_EN						BIT(0)
++#define APLL_320_EN					BIT(1)
++#define APLL_FREF_SEL				BIT(2)
++#define APLL_EDGE_SEL				BIT(3)
++#define APLL_WDOGB					BIT(4)
++#define APLL_LPFEN					BIT(5)
++
++#define APLL_REF_CLK_13MHZ			0x1
++#define APLL_REF_CLK_19_2MHZ		0x2
++#define APLL_REF_CLK_20MHZ			0x3
++#define APLL_REF_CLK_25MHZ			0x4
++#define APLL_REF_CLK_26MHZ			0x5
++#define APLL_REF_CLK_38_4MHZ		0x6
++#define APLL_REF_CLK_40MHZ			0x7
++
++#define APLL_320EN					BIT(14)
++#define APLL_80EN					BIT(15)
++#define APLL_1MEN					BIT(24)
++
++
++//2 EFUSE_CTRL
++#define ALD_EN						BIT(18)
++#define EF_PD						BIT(19)
++#define EF_FLAG						BIT(31)
++
++//2 EFUSE_TEST (For RTL8723 partially)
++#define EF_TRPT						BIT(7)
++#define EF_CELL_SEL					(BIT(8)|BIT(9)) // 00: Wifi Efuse, 01: BT Efuse0, 10: BT Efuse1, 11: BT Efuse2
++#define LDOE25_EN					BIT(31)
++#define EFUSE_SEL(x)					(((x) & 0x3) << 8)
++#define EFUSE_SEL_MASK				0x300
++#define EFUSE_WIFI_SEL_0			0x0
++#define EFUSE_BT_SEL_0				0x1
++#define EFUSE_BT_SEL_1				0x2
++#define EFUSE_BT_SEL_2				0x3
++
++#define EFUSE_ACCESS_ON			0x69	// For RTL8723 only.
++#define EFUSE_ACCESS_OFF			0x00	// For RTL8723 only.
++
++//2 PWR_DATA 
++
++//2 CAL_TIMER
++
++//2 ACLK_MON
++#define RSM_EN						BIT(0)
++#define Timer_EN						BIT(4)
++
++
++//2 GPIO_MUXCFG
++#define TRSW0EN						BIT(2)
++#define TRSW1EN						BIT(3)
++#define EROM_EN						BIT(4)
++#define EnBT							BIT(5)
++#define EnUart						BIT(8)
++#define Uart_910						BIT(9)
++#define EnPMAC						BIT(10)
++#define SIC_SWRST					BIT(11)
++#define EnSIC						BIT(12)
++#define SIC_23						BIT(13)
++#define EnHDP						BIT(14)
++#define SIC_LBK						BIT(15)
++
++//2 GPIO_PIN_CTRL
++
++// GPIO BIT
++#define HAL_8192C_HW_GPIO_WPS_BIT		BIT(2)
++
++//2 GPIO_INTM
++
++//2 LEDCFG
++#define LED0PL 						BIT(4)  
++#define LED0DIS						BIT(7)
++#define LED1DIS						BIT(15)
++#define LED1PL 						BIT(12)
++
++#define  SECCAM_CLR					BIT(30)
++
++
++//2 FSIMR
++
++//2 FSISR
++
++
++//2 8051FWDL
++//2 MCUFWDL
++#define MCUFWDL_EN					BIT(0)
++#define MCUFWDL_RDY				BIT(1)
++#define FWDL_ChkSum_rpt			BIT(2)
++#define MACINI_RDY					BIT(3)
++#define BBINI_RDY					BIT(4)
++#define RFINI_RDY					BIT(5)
++#define WINTINI_RDY					BIT(6)
++#define CPRST						BIT(23)
++
++//2REG_HPON_FSM
++#define BOND92CE_1T2R_CFG			BIT(22)
++
++
++//2 REG_SYS_CFG
++#define XCLK_VLD						BIT(0)
++#define ACLK_VLD					BIT(1)
++#define UCLK_VLD					BIT(2)
++#define PCLK_VLD						BIT(3)
++#define PCIRSTB						BIT(4)
++#define V15_VLD						BIT(5)
++#define TRP_B15V_EN					BIT(7)
++#define SIC_IDLE						BIT(8)
++#define BD_MAC2						BIT(9)
++#define BD_MAC1						BIT(10)
++#define IC_MACPHY_MODE				BIT(11)
++#define CHIP_VER						(BIT(12)|BIT(13)|BIT(14)|BIT(15))
++#define BT_FUNC						BIT(16)
++#define VENDOR_ID					BIT(19)
++#define PAD_HWPD_IDN				BIT(22)
++#define TRP_VAUX_EN					BIT(23)
++#define TRP_BT_EN					BIT(24)
++#define BD_PKG_SEL					BIT(25)
++#define BD_HCI_SEL					BIT(26)
++#define TYPE_ID						BIT(27)
++
++#define CHIP_VER_RTL_MASK			0xF000	//Bit 12 ~ 15
++#define CHIP_VER_RTL_SHIFT			12
++
++//2REG_GPIO_OUTSTS (For RTL8723 only)
++#define	EFS_HCI_SEL				(BIT(0)|BIT(1))
++#define	PAD_HCI_SEL				(BIT(2)|BIT(3))
++#define	HCI_SEL						(BIT(4)|BIT(5)) 
++#define	PKG_SEL_HCI				BIT(6)
++#define	FEN_GPS					BIT(7)
++#define	FEN_BT						BIT(8)
++#define	FEN_WL						BIT(9)
++#define	FEN_PCI						BIT(10)
++#define	FEN_USB					BIT(11)
++#define	BTRF_HWPDN_N				BIT(12)
++#define	WLRF_HWPDN_N				BIT(13)
++#define	PDN_BT_N					BIT(14)
++#define	PDN_GPS_N					BIT(15)
++#define	BT_CTL_HWPDN				BIT(16)
++#define	GPS_CTL_HWPDN				BIT(17)
++#define	PPHY_SUSB					BIT(20)
++#define	UPHY_SUSB					BIT(21)
++#define	PCI_SUSEN					BIT(22)
++#define	USB_SUSEN					BIT(23)
++#define	RF_RL_ID					(BIT(31)|BIT(30)|BIT(29)|BIT(28))
++
++//-----------------------------------------------------
++//
++//	0x0100h ~ 0x01FFh	MACTOP General Configuration
++//
++//-----------------------------------------------------
++
++
++//2 Function Enable Registers
++//2 CR
++
++#define REG_LBMODE					(REG_CR + 3)
++
++
++#define HCI_TXDMA_EN				BIT(0)
++#define HCI_RXDMA_EN				BIT(1)
++#define TXDMA_EN					BIT(2)
++#define RXDMA_EN					BIT(3)
++#define PROTOCOL_EN					BIT(4)
++#define SCHEDULE_EN					BIT(5)
++#define MACTXEN						BIT(6)
++#define MACRXEN						BIT(7)
++#define ENSWBCN						BIT(8)
++#define ENSEC						BIT(9)
++
++// Network type
++#define _NETTYPE(x)					(((x) & 0x3) << 16)
++#define MASK_NETTYPE				0x30000
++#define NT_NO_LINK					0x0
++#define NT_LINK_AD_HOC				0x1
++#define NT_LINK_AP					0x2
++#define NT_AS_AP					0x3
++
++#define _LBMODE(x)					(((x) & 0xF) << 24)
++#define MASK_LBMODE				0xF000000
++#define LOOPBACK_NORMAL			0x0
++#define LOOPBACK_IMMEDIATELY		0xB
++#define LOOPBACK_MAC_DELAY		0x3
++#define LOOPBACK_PHY				0x1
++#define LOOPBACK_DMA				0x7
++
++
++//2 PBP - Page Size Register
++#define GET_RX_PAGE_SIZE(value)		((value) & 0xF)
++#define GET_TX_PAGE_SIZE(value)		(((value) & 0xF0) >> 4)
++#define _PSRX_MASK					0xF
++#define _PSTX_MASK					0xF0
++#define _PSRX(x)						(x)
++#define _PSTX(x)						((x) << 4)
++
++#define PBP_64						0x0
++#define PBP_128						0x1
++#define PBP_256						0x2
++#define PBP_512						0x3
++#define PBP_1024					0x4
++
++
++//2 TX/RXDMA
++#define RXDMA_ARBBW_EN			BIT(0)
++#define RXSHFT_EN					BIT(1)
++#define RXDMA_AGG_EN				BIT(2)
++#define QS_VO_QUEUE				BIT(8)
++#define QS_VI_QUEUE					BIT(9)
++#define QS_BE_QUEUE				BIT(10)
++#define QS_BK_QUEUE				BIT(11)
++#define QS_MANAGER_QUEUE			BIT(12)
++#define QS_HIGH_QUEUE				BIT(13)
++
++#define HQSEL_VOQ					BIT(0)
++#define HQSEL_VIQ					BIT(1)
++#define HQSEL_BEQ					BIT(2)
++#define HQSEL_BKQ					BIT(3)
++#define HQSEL_MGTQ					BIT(4)
++#define HQSEL_HIQ					BIT(5)
++
++// For normal driver, 0x10C
++#define _TXDMA_HIQ_MAP(x) 	 		(((x)&0x3) << 14)
++#define _TXDMA_MGQ_MAP(x) 	 		(((x)&0x3) << 12)
++#define _TXDMA_BKQ_MAP(x) 	 		(((x)&0x3) << 10)		
++#define _TXDMA_BEQ_MAP(x) 	 		(((x)&0x3) << 8 )
++#define _TXDMA_VIQ_MAP(x) 	 		(((x)&0x3) << 6 )
++#define _TXDMA_VOQ_MAP(x) 	 		(((x)&0x3) << 4 )
++
++#define QUEUE_LOW					1
++#define QUEUE_NORMAL				2
++#define QUEUE_HIGH					3
++
++
++
++//2 TRXFF_BNDY
++
++
++//2 LLT_INIT
++#define _LLT_NO_ACTIVE				0x0
++#define _LLT_WRITE_ACCESS			0x1
++#define _LLT_READ_ACCESS			0x2
++
++#define _LLT_INIT_DATA(x)			((x) & 0xFF)
++#define _LLT_INIT_ADDR(x)			(((x) & 0xFF) << 8)
++#define _LLT_OP(x)					(((x) & 0x3) << 30)
++#define _LLT_OP_VALUE(x)			(((x) >> 30) & 0x3)
++
++
++//2 BB_ACCESS_CTRL
++#define BB_WRITE_READ_MASK		(BIT(31) | BIT(30))
++#define BB_WRITE_EN					BIT(30)
++#define BB_READ_EN					BIT(31)
++//#define BB_ADDR_MASK				0xFFF
++//#define _BB_ADDR(x)					((x) & BB_ADDR_MASK)
++
++//-----------------------------------------------------
++//
++//	0x0200h ~ 0x027Fh	TXDMA Configuration
++//
++//-----------------------------------------------------
++//2 RQPN
++#define _HPQ(x)						((x) & 0xFF)
++#define _LPQ(x)						(((x) & 0xFF) << 8)
++#define _PUBQ(x)						(((x) & 0xFF) << 16)
++#define _NPQ(x)						((x) & 0xFF)			// NOTE: in RQPN_NPQ register
++
++
++#define HPQ_PUBLIC_DIS				BIT(24)
++#define LPQ_PUBLIC_DIS				BIT(25)
++#define LD_RQPN						BIT(31)
++
++
++//2 TDECTRL
++#define BCN_VALID					BIT(16)
++#define BCN_HEAD(x)					(((x) & 0xFF) << 8)
++#define	BCN_HEAD_MASK				0xFF00
++
++//2 TDECTL
++#define BLK_DESC_NUM_SHIFT			4
++#define BLK_DESC_NUM_MASK			0xF
++
++
++//2 TXDMA_OFFSET_CHK
++#define DROP_DATA_EN				BIT(9)
++
++//-----------------------------------------------------
++//
++//	0x0400h ~ 0x047Fh	Protocol Configuration
++//
++//-----------------------------------------------------
++//2 FWHW_TXQ_CTRL
++#define EN_AMPDU_RTY_NEW			BIT(7)
++
++//2 INIRTSMCS_SEL
++#define _INIRTSMCS_SEL(x)			((x) & 0x3F)
++
++
++//2 SPEC SIFS
++#define _SPEC_SIFS_CCK(x)			((x) & 0xFF)
++#define _SPEC_SIFS_OFDM(x)			(((x) & 0xFF) << 8)
++
++
++//2 RRSR
++
++#define RATE_REG_BITMAP_ALL			0xFFFFF
++
++#define _RRSC_BITMAP(x)					((x) & 0xFFFFF)
++
++#define _RRSR_RSC(x)						(((x) & 0x3) << 21)
++#define RRSR_RSC_RESERVED				0x0
++#define RRSR_RSC_UPPER_SUBCHANNEL	0x1
++#define RRSR_RSC_LOWER_SUBCHANNEL	0x2
++#define RRSR_RSC_DUPLICATE_MODE		0x3
++
++
++//2 ARFR
++#define USE_SHORT_G1				BIT(20)
++
++//2 AGGLEN_LMT_L
++#define _AGGLMT_MCS0(x)				((x) & 0xF)
++#define _AGGLMT_MCS1(x)				(((x) & 0xF) << 4)
++#define _AGGLMT_MCS2(x)				(((x) & 0xF) << 8)
++#define _AGGLMT_MCS3(x)				(((x) & 0xF) << 12)
++#define _AGGLMT_MCS4(x)				(((x) & 0xF) << 16)
++#define _AGGLMT_MCS5(x)				(((x) & 0xF) << 20)
++#define _AGGLMT_MCS6(x)				(((x) & 0xF) << 24)
++#define _AGGLMT_MCS7(x)				(((x) & 0xF) << 28)
++
++
++//2 RL
++#define	RETRY_LIMIT_SHORT_SHIFT		8
++#define	RETRY_LIMIT_LONG_SHIFT		0
++
++
++//2 DARFRC
++#define _DARF_RC1(x)				((x) & 0x1F)
++#define _DARF_RC2(x)				(((x) & 0x1F) << 8)
++#define _DARF_RC3(x)				(((x) & 0x1F) << 16)
++#define _DARF_RC4(x)				(((x) & 0x1F) << 24)
++// NOTE: shift starting from address (DARFRC + 4)
++#define _DARF_RC5(x)				((x) & 0x1F)
++#define _DARF_RC6(x)				(((x) & 0x1F) << 8)
++#define _DARF_RC7(x)				(((x) & 0x1F) << 16)
++#define _DARF_RC8(x)				(((x) & 0x1F) << 24)
++
++
++//2 RARFRC
++#define _RARF_RC1(x)				((x) & 0x1F)
++#define _RARF_RC2(x)				(((x) & 0x1F) << 8)
++#define _RARF_RC3(x)				(((x) & 0x1F) << 16)
++#define _RARF_RC4(x)				(((x) & 0x1F) << 24)
++// NOTE: shift starting from address (RARFRC + 4)
++#define _RARF_RC5(x)				((x) & 0x1F)
++#define _RARF_RC6(x)				(((x) & 0x1F) << 8)
++#define _RARF_RC7(x)				(((x) & 0x1F) << 16)
++#define _RARF_RC8(x)				(((x) & 0x1F) << 24)
++
++
++
++
++//-----------------------------------------------------
++//
++//	0x0500h ~ 0x05FFh	EDCA Configuration
++//
++//-----------------------------------------------------
++
++
++
++//2 EDCA setting
++#define AC_PARAM_TXOP_LIMIT_OFFSET	16
++#define AC_PARAM_ECW_MAX_OFFSET		12
++#define AC_PARAM_ECW_MIN_OFFSET		8
++#define AC_PARAM_AIFS_OFFSET			0
++
++
++//2 EDCA_VO_PARAM
++#define _AIFS(x)						(x)
++#define _ECW_MAX_MIN(x)			((x) << 8)
++#define _TXOP_LIMIT(x)				((x) << 16)
++
++
++#define _BCNIFS(x)					((x) & 0xFF)
++#define _BCNECW(x)					(((x) & 0xF))<< 8)
++
++
++#define _LRL(x)						((x) & 0x3F)
++#define _SRL(x)						(((x) & 0x3F) << 8)
++
++
++//2 SIFS_CCK
++#define _SIFS_CCK_CTX(x)			((x) & 0xFF)
++#define _SIFS_CCK_TRX(x)			(((x) & 0xFF) << 8);
++
++
++//2 SIFS_OFDM
++#define _SIFS_OFDM_CTX(x)			((x) & 0xFF)
++#define _SIFS_OFDM_TRX(x)			(((x) & 0xFF) << 8);
++
++
++//2 TBTT PROHIBIT
++#define _TBTT_PROHIBIT_HOLD(x)		(((x) & 0xFF) << 8)
++
++
++//2 REG_RD_CTRL
++#define DIS_EDCA_CNT_DWN			BIT(11)
++
++
++//2 BCN_CTRL
++#define EN_MBSSID						BIT(1)
++#define EN_TXBCN_RPT					BIT(2)
++#define	EN_BCN_FUNCTION				BIT(3)
++// The same function but different bit field.
++#define	DIS_TSF_UDT0_NORMAL_CHIP	BIT(4)
++#define	DIS_TSF_UDT0_TEST_CHIP		BIT(5)
++
++//2 ACMHWCTRL
++#define	AcmHw_HwEn					BIT(0)
++#define	AcmHw_BeqEn					BIT(1)
++#define	AcmHw_ViqEn					BIT(2)
++#define	AcmHw_VoqEn					BIT(3)
++#define	AcmHw_BeqStatus				BIT(4)
++#define	AcmHw_ViqStatus				BIT(5)
++#define	AcmHw_VoqStatus				BIT(6)
++
++
++
++//-----------------------------------------------------
++//
++//	0x0600h ~ 0x07FFh	WMAC Configuration
++//
++//-----------------------------------------------------
++
++//2 APSD_CTRL
++#define APSDOFF						BIT(6)
++#define APSDOFF_STATUS				BIT(7)
++
++
++//2 BWOPMODE
++#define BW_20MHZ					BIT(2)
++//#define BW_OPMODE_20MHZ				BIT(2)	// For compability
++
++
++#define RATE_BITMAP_ALL			0xFFFFF
++
++// Only use CCK 1M rate for ACK
++#define RATE_RRSR_CCK_ONLY_1M		0xFFFF1
++
++//2 TCR
++#define TSFRST						BIT(0)
++#define DIS_GCLK						BIT(1)
++#define PAD_SEL						BIT(2)
++#define PWR_ST						BIT(6)
++#define PWRBIT_OW_EN				BIT(7)
++#define ACRC							BIT(8)
++#define CFENDFORM					BIT(9)
++#define ICV							BIT(10)
++
++
++
++//2 RCR
++#define AAP							BIT(0)
++#define APM							BIT(1)
++#define AM							BIT(2)
++#define AB							BIT(3)
++#define ADD3							BIT(4)
++#define APWRMGT					BIT(5)
++#define CBSSID						BIT(6)
++#define CBSSID_BCN					BIT(7)
++#define ACRC32						BIT(8)
++#define AICV							BIT(9)
++#define ADF							BIT(11)
++#define ACF							BIT(12)
++#define AMF							BIT(13)
++#define HTC_LOC_CTRL				BIT(14)
++#define UC_DATA_EN					BIT(16)
++#define BM_DATA_EN					BIT(17)
++#define MFBEN						BIT(22)
++#define LSIGEN						BIT(23)
++#define EnMBID						BIT(24)
++#define APP_BASSN					BIT(27)
++#define APP_PHYSTS					BIT(28)
++#define APP_ICV						BIT(29)
++#define APP_MIC						BIT(30)
++#define APP_FCS						BIT(31)
++
++//2 RX_PKT_LIMIT
++
++//2 RX_DLK_TIME
++
++//2 MBIDCAMCFG
++
++
++
++//2 AMPDU_MIN_SPACE
++#define _MIN_SPACE(x)				((x) & 0x7)
++#define _SHORT_GI_PADDING(x)		(((x) & 0x1F) << 3)
++
++
++//2 RXERR_RPT
++#define RXERR_TYPE_OFDM_PPDU				0
++#define RXERR_TYPE_OFDM_FALSE_ALARM		1
++#define	RXERR_TYPE_OFDM_MPDU_OK			2
++#define RXERR_TYPE_OFDM_MPDU_FAIL		3
++#define RXERR_TYPE_CCK_PPDU				4
++#define RXERR_TYPE_CCK_FALSE_ALARM		5
++#define RXERR_TYPE_CCK_MPDU_OK			6
++#define RXERR_TYPE_CCK_MPDU_FAIL			7
++#define RXERR_TYPE_HT_PPDU					8
++#define RXERR_TYPE_HT_FALSE_ALARM		9
++#define RXERR_TYPE_HT_MPDU_TOTAL			10
++#define RXERR_TYPE_HT_MPDU_OK				11
++#define RXERR_TYPE_HT_MPDU_FAIL			12
++#define RXERR_TYPE_RX_FULL_DROP			15
++
++#define RXERR_COUNTER_MASK				0xFFFFF
++#define RXERR_RPT_RST						BIT(27)
++#define _RXERR_RPT_SEL(type)				((type) << 28)
++
++
++//2 SECCFG
++#define	SCR_TxUseDK						BIT(0)			//Force Tx Use Default Key
++#define	SCR_RxUseDK						BIT(1)			//Force Rx Use Default Key
++#define	SCR_TxEncEnable					BIT(2)			//Enable Tx Encryption
++#define	SCR_RxDecEnable					BIT(3)			//Enable Rx Decryption
++#define	SCR_SKByA2							BIT(4)			//Search kEY BY A2
++#define	SCR_NoSKMC							BIT(5)			//No Key Search Multicast
++
++
++
++//-----------------------------------------------------
++//
++//	0xFE00h ~ 0xFE55h	USB Configuration
++//
++//-----------------------------------------------------
++
++//2 USB Information (0xFE17)
++#define USB_IS_HIGH_SPEED				0
++#define USB_IS_FULL_SPEED				1
++#define USB_SPEED_MASK					BIT(5)
++
++#define USB_NORMAL_SIE_EP_MASK		0xF
++#define USB_NORMAL_SIE_EP_SHIFT		4
++
++#define USB_TEST_EP_MASK				0x30
++#define USB_TEST_EP_SHIFT				4
++
++//2 Special Option
++#define USB_AGG_EN						BIT(3)
++
++
++//2REG_C2HEVT_CLEAR
++#define		C2H_EVT_HOST_CLOSE		0x00	// Set by driver and notify FW that the driver has read the C2H command message
++#define		C2H_EVT_FW_CLOSE		0xFF	// Set by FW indicating that FW had set the C2H command message and it's not yet read by driver.
++
++
++//2REG_MULTI_FUNC_CTRL(For RTL8723 Only)
++#define	WL_HWPDN_EN				BIT0		// Enable GPIO[9] as WiFi HW PDn source
++#define	WL_HWPDN_SL				BIT1		// WiFi HW PDn polarity control
++#define	WL_FUNC_EN				BIT2		// WiFi function enable
++#define	WL_HWROF_EN				BIT3		// Enable GPIO[9] as WiFi RF HW PDn source
++#define	BT_HWPDN_EN				BIT16	// Enable GPIO[11] as BT HW PDn source
++#define	BT_HWPDN_SL				BIT17	// BT HW PDn polarity control
++#define	BT_FUNC_EN					BIT18	// BT function enable
++#define	BT_HWROF_EN				BIT19	// Enable GPIO[11] as BT/GPS RF HW PDn source
++#define	GPS_HWPDN_EN				BIT20	// Enable GPIO[10] as GPS HW PDn source
++#define	GPS_HWPDN_SL				BIT21	// GPS HW PDn polarity control
++#define	GPS_FUNC_EN				BIT22	// GPS function enable
++
++//3 REG_LIFECTRL_CTRL
++#define	HAL92C_EN_PKT_LIFE_TIME_BK		BIT3
++#define	HAL92C_EN_PKT_LIFE_TIME_BE		BIT2
++#define	HAL92C_EN_PKT_LIFE_TIME_VI		BIT1
++#define	HAL92C_EN_PKT_LIFE_TIME_VO		BIT0
++
++#define	HAL92C_MSDU_LIFE_TIME_UNIT		128		// in us, said by Tim.
++
++//========================================================
++// General definitions
++//========================================================
++
++#define MAC_ADDR_LEN					6
++#define LAST_ENTRY_OF_TX_PKT_BUFFER	255
++
++#define POLLING_LLT_THRESHOLD			20
++#define POLLING_READY_TIMEOUT_COUNT	1000
++
++// Min Spacing related settings.
++#define	MAX_MSS_DENSITY_2T				0x13
++#define	MAX_MSS_DENSITY_1T				0x0A
++
++//----------------------------------------------------------------------------
++//       8192C GPIO MUX Configuration Register (offset 0x40, 4 byte)
++//----------------------------------------------------------------------------
++#define	GPIOSEL_GPIO				0
++#define	GPIOSEL_ENBT				BIT5
++
++//----------------------------------------------------------------------------
++//       8192C GPIO PIN Control Register (offset 0x44, 4 byte)
++//----------------------------------------------------------------------------
++#define	GPIO_IN						REG_GPIO_PIN_CTRL		// GPIO pins input value
++#define	GPIO_OUT					(REG_GPIO_PIN_CTRL+1)	// GPIO pins output value
++#define	GPIO_IO_SEL				(REG_GPIO_PIN_CTRL+2)	// GPIO pins output enable when a bit is set to "1"; otherwise, input is configured.
++#define	GPIO_MOD					(REG_GPIO_PIN_CTRL+3)
++
++
++
++#include "basic_types.h"
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192c_sreset.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192c_sreset.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192c_sreset.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192c_sreset.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,32 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef _RTL8192C_SRESET_C_
++#define _RTL8192C_SRESET_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <rtw_sreset.h>
++
++#ifdef DBG_CONFIG_ERROR_DETECT
++extern void rtl8192c_sreset_xmit_status_check(_adapter *padapter);
++extern void rtl8192c_sreset_linked_status_check(_adapter *padapter);
++#endif
++#endif
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192c_xmit.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192c_xmit.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192c_xmit.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192c_xmit.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,129 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef _RTL8192C_XMIT_H_
++#define _RTL8192C_XMIT_H_
++
++//
++// Queue Select Value in TxDesc
++//
++#define QSLT_BK							0x2//0x01
++#define QSLT_BE							0x0
++#define QSLT_VI							0x5//0x4
++#define QSLT_VO							0x7//0x6
++#define QSLT_BEACON						0x10
++#define QSLT_HIGH						0x11
++#define QSLT_MGNT						0x12
++#define QSLT_CMD						0x13
++
++struct txrpt_ccx_8192c {
++	/* offset 0 */
++	u8 retry_cnt:6;
++	u8 rsvd_0:2;
++
++	/* offset 1 */
++	u8 rts_retry_cnt:6;
++	u8 rsvd_1:2;
++
++	/* offset 2 */
++	u8 ccx_qtime0;
++	u8 ccx_qtime1;
++
++	/* offset 4 */
++	u8 missed_pkt_num:5;
++	u8 rsvd_4:3;
++
++	/* offset 5 */
++	u8 mac_id:5;
++	u8 des1_fragssn:3;
++
++	/* offset 6 */
++	u8 rpt_pkt_num:5;
++	u8 pkt_drop:1;
++	u8 lifetime_over:1;
++	u8 retry_over:1;
++
++	/* offset 7*/
++	u8 edca_tx_queue:4;
++	u8 rsvd_7:1;
++	u8 bmc:1;
++	u8 pkt_ok:1;
++	u8 int_ccx:1;
++};
++
++#define txrpt_ccx_qtime_8192c(txrpt_ccx) ((txrpt_ccx)->ccx_qtime0+((txrpt_ccx)->ccx_qtime1<<8))
++
++#ifdef CONFIG_XMIT_ACK
++void dump_txrpt_ccx_8192c(void *buf);
++void handle_txrpt_ccx_8192c(_adapter *adapter, void *buf);
++#else
++#define dump_txrpt_ccx_8192c(buf) do {} while(0)
++#define handle_txrpt_ccx_8192c(adapter, buf) do {} while(0)
++#endif
++
++#ifdef CONFIG_USB_HCI
++
++#ifdef CONFIG_USB_TX_AGGREGATION
++#define MAX_TX_AGG_PACKET_NUMBER 0xFF
++#endif
++
++s32	rtl8192cu_init_xmit_priv(_adapter * padapter);
++
++void	rtl8192cu_free_xmit_priv(_adapter * padapter);
++
++void rtl8192cu_cal_txdesc_chksum(struct tx_desc	*ptxdesc);
++
++s32 rtl8192cu_xmitframe_complete(_adapter *padapter, struct xmit_priv *pxmitpriv, struct xmit_buf *pxmitbuf);
++
++s32 rtl8192cu_mgnt_xmit(_adapter *padapter, struct xmit_frame *pmgntframe);
++
++s32 rtl8192cu_hal_xmit(_adapter *padapter, struct xmit_frame *pxmitframe);
++
++s32	 rtl8192cu_hal_xmitframe_enqueue(_adapter *padapter, struct xmit_frame *pxmitframe);
++
++#ifdef CONFIG_HOSTAPD_MLME
++s32 rtl8192cu_hostap_mgnt_xmit_entry(_adapter *padapter, _pkt *pkt);
++#endif
++
++#endif
++
++#ifdef CONFIG_PCI_HCI
++s32	rtl8192ce_init_xmit_priv(_adapter * padapter);
++void	rtl8192ce_free_xmit_priv(_adapter * padapter);
++
++s32	rtl8192ce_enqueue_xmitbuf(struct rtw_tx_ring *ring, struct xmit_buf *pxmitbuf);
++struct xmit_buf *rtl8192ce_dequeue_xmitbuf(struct rtw_tx_ring *ring);
++
++void	rtl8192ce_xmitframe_resume(_adapter *padapter);
++
++s32	rtl8192ce_mgnt_xmit(_adapter *padapter, struct xmit_frame *pmgntframe);
++
++s32	rtl8192ce_hal_xmit(_adapter *padapter, struct xmit_frame *pxmitframe);
++
++s32	 rtl8192ce_hal_xmitframe_enqueue(_adapter *padapter, struct xmit_frame *pxmitframe);
++
++
++#ifdef CONFIG_HOSTAPD_MLME
++s32	rtl8192ce_hostap_mgnt_xmit_entry(_adapter *padapter, _pkt *pkt);
++#endif
++
++#endif
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192d_cmd.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192d_cmd.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192d_cmd.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192d_cmd.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,142 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __RTL8192D_CMD_H_
++#define __RTL8192D_CMD_H_
++
++
++//--------------------------------------------
++//3				Host Message Box 
++//--------------------------------------------
++
++// User Define Message [31:8]
++
++//_SETPWRMODE_PARM
++#define SET_H2CCMD_PWRMODE_PARM_MODE(__pH2CCmd, __Value)			SET_BITS_TO_LE_1BYTE(__pH2CCmd, 0, 8, __Value)
++#define SET_H2CCMD_PWRMODE_PARM_SMART_PS(__pH2CCmd, __Value)		SET_BITS_TO_LE_1BYTE((__pH2CCmd)+1, 0, 8, __Value)
++#define SET_H2CCMD_PWRMODE_PARM_BCN_PASS_TIME(__pH2CCmd, __Value)	SET_BITS_TO_LE_1BYTE((__pH2CCmd)+2, 0, 8, __Value)
++
++//JOINBSSRPT_PARM
++#define SET_H2CCMD_JOINBSSRPT_PARM_OPMODE(__pH2CCmd, __Value)		SET_BITS_TO_LE_1BYTE(__pH2CCmd, 0, 8, __Value)
++
++//_RSVDPAGE_LOC
++#define SET_H2CCMD_RSVDPAGE_LOC_PROBE_RSP(__pH2CCmd, __Value)		SET_BITS_TO_LE_1BYTE(__pH2CCmd, 0, 8, __Value)
++#define SET_H2CCMD_RSVDPAGE_LOC_PSPOLL(__pH2CCmd, __Value)			SET_BITS_TO_LE_1BYTE((__pH2CCmd)+1, 0, 8, __Value)
++#define SET_H2CCMD_RSVDPAGE_LOC_NULL_DATA(__pH2CCmd, __Value)		SET_BITS_TO_LE_1BYTE((__pH2CCmd)+2, 0, 8, __Value)
++
++//P2P_PS_OFFLOAD
++
++struct P2P_PS_Offload_t {
++ unsigned char Offload_En:1;
++ unsigned char role:1; // 1: Owner, 0: Client
++ unsigned char CTWindow_En:1;
++ unsigned char NoA0_En:1;
++ unsigned char NoA1_En:1;
++ unsigned char AllStaSleep:1; // Only valid in Owner
++ unsigned char discovery:1;
++ unsigned char rsvd:1;
++};
++
++#define SET_H2CCMD_P2P_PS_OFFLOAD_EN(__pH2CCmd, __Value)		SET_BITS_TO_LE_1BYTE(__pH2CCmd, 0, 1, __Value)
++#define SET_H2CCMD_P2P_PS_OFFLOAD_ROLE(__pH2CCmd, __Value)		SET_BITS_TO_LE_1BYTE(__pH2CCmd, 1, 1, __Value)
++#define SET_H2CCMD_P2P_PS_OFFLOAD_CTW(__pH2CCmd, __Value)		SET_BITS_TO_LE_1BYTE(__pH2CCmd, 2, 1, __Value)
++#define SET_H2CCMD_P2P_PS_OFFLOAD_NOA0(__pH2CCmd, __Value)		SET_BITS_TO_LE_1BYTE(__pH2CCmd, 3, 1, __Value)
++#define SET_H2CCMD_P2P_PS_OFFLOAD_NOA1(__pH2CCmd, __Value)		SET_BITS_TO_LE_1BYTE(__pH2CCmd, 4, 1, __Value)
++#define SET_H2CCMD_P2P_PS_OFFLOAD_ALLSTASLEEP(__pH2CCmd, __Value)		SET_BITS_TO_LE_1BYTE(__pH2CCmd, 5, 1, __Value)
++#define SET_H2CCMD_P2P_PS_OFFLOAD_DISCOVERY(__pH2CCmd, __Value)		SET_BITS_TO_LE_1BYTE(__pH2CCmd, 6, 1, __Value)
++
++// Description: Determine the types of H2C commands that are the same in driver and Fw.
++// Fisrt constructed by tynli. 2009.10.09.
++typedef enum _RTL8192D_H2C_CMD 
++{
++	H2C_AP_OFFLOAD = 0,		/*0*/
++	H2C_SETPWRMODE = 1,		/*1*/
++	H2C_JOINBSSRPT = 2,		/*2*/
++	H2C_RSVDPAGE = 3,
++	H2C_RSSI_REPORT = 5,
++	H2C_RA_MASK = 6,
++	H2C_P2P_PS_OFFLOAD = 8,
++	H2C_MAC_MODE_SEL = 9,
++	H2C_PWRM=15,
++#ifdef CONFIG_WOWLAN
++	H2C_WO_WLAN_CMD = 20,	// Wake on Wlan.
++#endif // CONFIG_WOWLAN
++	H2C_P2P_PS_CTW_CMD = 24,
++	H2C_PathDiv = 26,                  //PathDiv--NeilChen--2011.07.15
++#ifdef CONFIG_WOWLAN
++	KEEP_ALIVE_CONTROL_CMD=31, //keep alive for wake on wlan
++	DISCONNECT_DECISION_CTRL_CMD=32,
++	REMOTE_WAKE_CTRL_CMD=34,
++#endif // CONFIG_WOWLAN
++	H2C_92D_TSF_SYNC=36,
++	H2C_92D_RESET_TSF = 43,
++	H2C_CMD_MAX
++}RTL8192D_H2C_CMD;
++
++struct cmd_msg_parm {
++	u8 eid; //element id
++	u8 sz; // sz
++	u8 buf[6];
++};
++
++
++void	FillH2CCmd92D(_adapter* padapter, u8 ElementID, u32 CmdLen, u8* pCmdBuffer);
++
++// host message to firmware cmd
++void	rtl8192d_set_FwPwrMode_cmd(_adapter*padapter, u8 Mode);
++void	rtl8192d_set_FwJoinBssReport_cmd(_adapter* padapter, u8 mstatus);
++u8	rtl8192d_set_rssi_cmd(_adapter*padapter, u8 *param);
++u8	rtl8192d_set_raid_cmd(_adapter*padapter, u32 mask, u8 arg);
++void	rtl8192d_Add_RateATid(PADAPTER pAdapter, u32 bitmap, u8 arg);
++#ifdef CONFIG_P2P
++void	rtl8192d_set_p2p_ps_offload_cmd(_adapter* padapter, u8 p2p_ps_state);
++#endif //CONFIG_P2P
++
++#ifdef CONFIG_TSF_RESET_OFFLOAD
++int reset_tsf(PADAPTER Adapter, u8 reset_port );
++#endif	// CONFIG_TSF_RESET_OFFLOAD
++
++#ifdef CONFIG_WOWLAN
++typedef struct _SETWOWLAN_PARM{
++	u8 	mode;
++	u8 	gpio_index;
++	u8	gpio_duration;	
++	u8  second_mode;
++	u8  reserve;
++}SETWOWLAN_PARM, *PSETWOWLAN_PARM;
++
++#define FW_WOWLAN_FUN_EN			BIT(0)
++#define FW_WOWLAN_PATTERN_MATCH		BIT(1)
++#define FW_WOWLAN_MAGIC_PKT			BIT(2)
++#define FW_WOWLAN_UNICAST			BIT(3)
++#define FW_WOWLAN_ALL_PKT_DROP		BIT(4)
++#define FW_WOWLAN_GPIO_ACTIVE		BIT(5)
++#define FW_WOWLAN_REKEY_WAKEUP		BIT(6)
++#define FW_WOWLAN_DEAUTH_WAKEUP		BIT(7)
++
++#define FW_WOWLAN_GPIO_WAKEUP_EN	BIT(0)
++#define FW_FW_PARSE_MAGIC_PKT		BIT(1)
++
++void rtl8192d_set_wowlan_cmd(_adapter* padapter);
++void SetFwRelatedForWoWLAN8192DU(_adapter* 	padapter,u8 bHostIsGoingtoSleep);
++#endif // CONFIG_WOWLAN
++
++#endif	// __RTL8192D_CMD_H_
++
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192d_dm.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192d_dm.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192d_dm.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192d_dm.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,420 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef	__RTL8192D_DM_H__
++#define __RTL8192D_DM_H__
++//============================================================
++// Description:
++//
++// This file is for 92CE/92CU dynamic mechanism only
++//
++//
++//============================================================
++//============================================================
++// Global var
++//============================================================
++
++extern u32 EDCAParam[maxAP][3] ;
++
++//============================================================
++// structure and define
++//============================================================
++
++typedef struct _FALSE_ALARM_STATISTICS{
++	u32	Cnt_Parity_Fail;
++	u32	Cnt_Rate_Illegal;
++	u32	Cnt_Crc8_fail;
++	u32	Cnt_Mcs_fail;
++	u32	Cnt_Ofdm_fail;
++	u32	Cnt_Cck_fail;
++	u32	Cnt_all;
++	u32	Cnt_Fast_Fsync;
++	u32	Cnt_SB_Search_fail;
++}FALSE_ALARM_STATISTICS, *PFALSE_ALARM_STATISTICS;
++
++typedef struct _Dynamic_Power_Saving_
++{
++	u8		PreCCAState;
++	u8		CurCCAState;
++
++	u8		PreRFState;
++	u8		CurRFState;
++
++	//int		Rssi_val_min;
++	
++}PS_T,*pPS_T;
++
++typedef struct _Dynamic_Initial_Gain_Threshold_
++{
++	u8		Dig_Enable_Flag;
++	u8		Dig_Ext_Port_Stage;
++	
++	int		RssiLowThresh;
++	int		RssiHighThresh;
++
++	u32		FALowThresh;
++	u32		FAHighThresh;
++
++	u8		CurSTAConnectState;
++	u8		PreSTAConnectState;
++	u8		CurMultiSTAConnectState;
++
++	u8		PreIGValue;
++	u8		CurIGValue;
++	u8	       BackupIGValue;
++
++	char		BackoffVal;
++	char		BackoffVal_range_max;
++	char		BackoffVal_range_min;
++	u8		rx_gain_range_max;
++	u8		rx_gain_range_min;
++	u8		Rssi_val_min;
++
++	u8		PreCCKPDState;
++	u8		CurCCKPDState;
++
++	u8		LargeFAHit;
++	u8		ForbiddenIGI;
++	u32		Recover_cnt;
++	u8		rx_gain_range_min_nolink;
++}DIG_T,*pDIG_T;
++
++typedef enum tag_Dynamic_Init_Gain_Operation_Type_Definition
++{
++	DIG_TYPE_THRESH_HIGH	= 0,
++	DIG_TYPE_THRESH_LOW	= 1,
++	DIG_TYPE_BACKOFF		= 2,
++	DIG_TYPE_RX_GAIN_MIN	= 3,
++	DIG_TYPE_RX_GAIN_MAX	= 4,
++	DIG_TYPE_ENABLE 		= 5,
++	DIG_TYPE_DISABLE 		= 6,
++	DIG_OP_TYPE_MAX
++}DM_DIG_OP_E;
++
++typedef enum tag_CCK_Packet_Detection_Threshold_Type_Definition
++{
++	CCK_PD_STAGE_LowRssi = 0,
++	CCK_PD_STAGE_HighRssi = 1,
++	CCK_PD_STAGE_MAX = 3,
++}DM_CCK_PDTH_E;
++
++typedef enum tag_1R_CCA_Type_Definition
++{
++	CCA_MIN = 0,
++	CCA_1R =1,
++	CCA_2R = 2,
++	CCA_MAX = 3,
++}DM_1R_CCA_E;
++
++typedef enum tag_RF_Type_Definition
++{
++	RF_Save =0,
++	RF_Normal = 1,
++	RF_MAX = 2,
++}DM_RF_E;
++
++typedef enum tag_DIG_EXT_PORT_ALGO_Definition
++{
++	DIG_EXT_PORT_STAGE_0 = 0,
++	DIG_EXT_PORT_STAGE_1 = 1,
++	DIG_EXT_PORT_STAGE_2 = 2,
++	DIG_EXT_PORT_STAGE_3 = 3,
++	DIG_EXT_PORT_STAGE_MAX = 4,
++}DM_DIG_EXT_PORT_ALG_E;
++
++
++typedef enum tag_DIG_Connect_Definition
++{
++	DIG_STA_DISCONNECT = 0,	
++	DIG_STA_CONNECT = 1,
++	DIG_STA_BEFORE_CONNECT = 2,
++	DIG_MultiSTA_DISCONNECT = 3,
++	DIG_MultiSTA_CONNECT = 4,
++	DIG_CONNECT_MAX
++}DM_DIG_CONNECT_E;
++
++
++#define		DM_DIG_THRESH_HIGH			40
++#define		DM_DIG_THRESH_LOW			35
++
++#define		DM_FALSEALARM_THRESH_LOW	400
++#define		DM_FALSEALARM_THRESH_HIGH	1000
++
++#define		DM_DIG_MAX					0x3e
++#define		DM_DIG_MIN					0x1e //0x22//0x1c
++
++#define		DM_DIG_FA_UPPER				0x32
++#define		DM_DIG_FA_LOWER				0x20
++
++//vivi 92c&92d has different definition, 20110504
++//this is for 92c
++#define		DM_DIG_FA_TH0				0x200//0x20
++#define		DM_DIG_FA_TH1				0x300//0x100
++#define		DM_DIG_FA_TH2				0x400//0x200
++//this is for 92d
++#define		DM_DIG_FA_TH0_92D			0x100
++#define		DM_DIG_FA_TH1_92D			0x150
++#define		DM_DIG_FA_TH2_92D			0x250
++
++#define		DM_DIG_BACKOFF_MAX			12
++#define		DM_DIG_BACKOFF_MIN			(-4)
++#define		DM_DIG_BACKOFF_DEFAULT		10
++
++#define		RxPathSelection_SS_TH_low		30
++#define		RxPathSelection_diff_TH			18
++
++#define		DM_RATR_STA_INIT			0
++#define		DM_RATR_STA_HIGH			1
++#define 		DM_RATR_STA_MIDDLE		2
++#define 		DM_RATR_STA_LOW			3
++
++#define		CTSToSelfTHVal					30
++#define		RegC38_TH						20
++
++#define		WAIotTHVal						25
++
++//Dynamic Tx Power Control Threshold
++#define		TX_POWER_NEAR_FIELD_THRESH_LVL2	74
++#define		TX_POWER_NEAR_FIELD_THRESH_LVL1	67
++
++#define		TxHighPwrLevel_Normal		0	
++#define		TxHighPwrLevel_Level1		1
++#define		TxHighPwrLevel_Level2		2
++#define		TxHighPwrLevel_BT1			3
++#define		TxHighPwrLevel_BT2			4
++#define		TxHighPwrLevel_15			5
++#define		TxHighPwrLevel_35			6
++#define		TxHighPwrLevel_50			7
++#define		TxHighPwrLevel_70			8
++#define		TxHighPwrLevel_100			9
++
++#define		DM_Type_ByFW			0
++#define		DM_Type_ByDriver		1
++
++typedef struct _RATE_ADAPTIVE
++{
++	u8				RateAdaptiveDisabled;
++	u8				RATRState;
++	u16				reserve;	
++	
++	u32				HighRSSIThreshForRA;
++	u32				High2LowRSSIThreshForRA;
++	u8				Low2HighRSSIThreshForRA40M;
++	u32				LowRSSIThreshForRA40M;	
++	u8				Low2HighRSSIThreshForRA20M;
++	u32				LowRSSIThreshForRA20M;	
++	u32				UpperRSSIThresholdRATR;
++	u32				MiddleRSSIThresholdRATR;
++	u32				LowRSSIThresholdRATR;
++	u32				LowRSSIThresholdRATR40M;
++	u32				LowRSSIThresholdRATR20M;
++	u8				PingRSSIEnable;	//cosa add for Netcore long range ping issue
++	u32				PingRSSIRATR;	//cosa add for Netcore long range ping issue
++	u32				PingRSSIThreshForRA;//cosa add for Netcore long range ping issue
++	u32				LastRATR;
++	u8				PreRATRState;
++	
++} RATE_ADAPTIVE, *PRATE_ADAPTIVE;
++
++typedef enum tag_SW_Antenna_Switch_Definition
++{
++	Antenna_B = 1,
++	Antenna_A = 2,
++	Antenna_MAX = 3,
++}DM_SWAS_E;
++
++// 20100514 Joseph: Add definition for antenna switching test after link.
++// This indicates two different the steps. 
++// In SWAW_STEP_PEAK, driver needs to switch antenna and listen to the signal on the air.
++// In SWAW_STEP_DETERMINE, driver just compares the signal captured in SWAW_STEP_PEAK
++// with original RSSI to determine if it is necessary to switch antenna.
++#define SWAW_STEP_PEAK		0
++#define SWAW_STEP_DETERMINE	1
++
++#define	TP_MODE		0
++#define	RSSI_MODE		1
++#define	TRAFFIC_LOW	0
++#define	TRAFFIC_HIGH	1
++
++//=============================
++//Neil Chen---2011--06--15--
++//==============================
++//3 PathDiv 
++typedef struct _SW_Antenna_Switch_
++{
++	u8		try_flag;
++	s32		PreRSSI;
++	u8		CurAntenna;
++	u8		PreAntenna;
++	u8		RSSI_Trying;
++	u8		TestMode;
++	u8		bTriggerAntennaSwitch;
++	u8		SelectAntennaMap;
++
++	// Before link Antenna Switch check
++	u8		SWAS_NoLink_State;
++	u32		SWAS_NoLink_BK_Reg860;
++}SWAT_T, *pSWAT_T;
++//========================================
++
++struct 	dm_priv	
++{
++	u8	DM_Type;
++	u8	DMFlag, DMFlag_tmp;
++
++	//for DIG
++	u8	bDMInitialGainEnable;
++	//u8	binitialized; // for dm_initial_gain_Multi_STA use.
++	DIG_T	DM_DigTable;
++
++	PS_T	DM_PSTable;
++
++	FALSE_ALARM_STATISTICS	FalseAlmCnt;	
++	
++	//for rate adaptive, in fact,  88c/92c fw will handle this
++	u8	bUseRAMask;
++	RATE_ADAPTIVE	RateAdaptive;
++
++	//* Upper and Lower Signal threshold for Rate Adaptive*/
++	int	UndecoratedSmoothedPWDB;
++	int	EntryMinUndecoratedSmoothedPWDB;
++	int	EntryMaxUndecoratedSmoothedPWDB;
++	int	MinUndecoratedPWDBForDM;
++	int	LastMinUndecoratedPWDBForDM;
++#ifdef CONFIG_DUALMAC_CONCURRENT
++	int	RssiValMinForAnotherMacOfDMSP;
++	u32	CurDigValueForAnotherMacOfDMSP;
++	BOOLEAN		bWriteDigForAnotherMacOfDMSP;
++	BOOLEAN		bChangeCCKPDStateForAnotherMacOfDMSP;
++	u8	CurCCKPDStateForAnotherMacOfDMSP;
++	BOOLEAN		bChangeTxHighPowerLvlForAnotherMacOfDMSP;
++	u8	CurTxHighLvlForAnotherMacOfDMSP;
++#endif
++
++	//for High Power
++	u8	bDynamicTxPowerEnable;
++	u8	LastDTPLvl;
++	u8	DynamicTxHighPowerLvl;//Add by Jacken Tx Power Control for Near/Far Range 2008/03/06
++		
++	//for tx power tracking
++	u8	bTXPowerTracking;
++	u8	TXPowercount;
++	u8	bTXPowerTrackingInit;	
++	u8	TxPowerTrackControl;	//for mp mode, turn off txpwrtracking as default
++	u8	TM_Trigger;
++
++	u8	ThermalMeter[2];	// ThermalMeter, index 0 for RFIC0, and 1 for RFIC1
++	u8	ThermalValue;
++	u8	ThermalValue_LCK;
++	u8	ThermalValue_IQK;
++	u8	ThermalValue_AVG[AVG_THERMAL_NUM];
++	u8	ThermalValue_AVG_index;
++	u8	ThermalValue_RxGain;
++	u8	ThermalValue_Crystal;
++	u8	Delta_IQK;
++	u8	Delta_LCK;
++	u8	bRfPiEnable;
++	u8	bReloadtxpowerindex;
++	u8	bDoneTxpower;
++
++	//for APK
++	u32	APKoutput[2][2];	//path A/B; output1_1a/output1_2a
++	u8	bAPKdone;
++	u8	bAPKThermalMeterIgnore;
++	BOOLEAN		bDPKdone[2];
++	BOOLEAN		bDPKstore;
++	BOOLEAN		bDPKworking;
++	u8	OFDM_min_index_internalPA_DPK[2];
++	u8	TxPowerLevelDPK[2];
++
++	u32	RegA24;
++
++	//for IQK
++	u32	Reg874;
++	u32	RegC08;
++	u32	Reg88C;
++	u8	Reg522;
++	u8	Reg550;
++	u8	Reg551;
++	u32	Reg870;
++	u32	ADDA_backup[IQK_ADDA_REG_NUM];
++	u32	IQK_MAC_backup[IQK_MAC_REG_NUM];
++	u32	IQK_BB_backup[IQK_BB_REG_NUM];
++
++	u8	bCCKinCH14;
++
++	char	CCK_index;
++	//u8 Record_CCK_20Mindex;
++	//u8 Record_CCK_40Mindex;
++	char	OFDM_index[2];
++
++	SWAT_T DM_SWAT_Table;
++
++	//for TxPwrTracking
++	int	RegE94;
++	int 	RegE9C;
++	int	RegEB4;
++	int	RegEBC;
++#if MP_DRIVER == 1
++	u8	RegC04_MP;
++	u32	RegD04_MP;
++#endif
++	u32	TXPowerTrackingCallbackCnt;	//cosa add for debug
++
++	u32	prv_traffic_idx; // edca turbo
++
++	u32	RegRF3C[2];	//pathA / pathB
++
++	// Add for Reading Initial Data Rate SEL Register 0x484 during watchdog. Using for fill tx desc. 2011.3.21 by Thomas
++	u8	INIDATA_RATE[32];
++
++#ifdef CONFIG_DM_ADAPTIVITY
++	/* Ported from ODM, for ESTI Adaptivity test */
++	s8 TH_L2H_ini;
++	s8 TH_EDCCA_HL_diff;
++	s8 IGI_Base;
++	u8 IGI_target;
++	bool ForceEDCCA;
++	u8 AdapEn_RSSI;
++	s8 Force_TH_H;
++	s8 Force_TH_L;
++	u8 IGI_LowerBound;
++
++	bool	bPreEdccaEnable;
++#endif
++};
++
++
++/*------------------------Export global variable----------------------------*/
++/*------------------------Export global variable----------------------------*/
++/*------------------------Export Marco Definition---------------------------*/
++//#define DM_MultiSTA_InitGainChangeNotify(Event) {DM_DigTable.CurMultiSTAConnectState = Event;}
++
++
++//============================================================
++// function prototype
++//============================================================
++void rtl8192d_init_dm_priv(IN PADAPTER Adapter);
++void rtl8192d_deinit_dm_priv(IN PADAPTER Adapter);
++void	rtl8192d_InitHalDm(IN PADAPTER Adapter);
++void	rtl8192d_HalDmWatchDog(IN PADAPTER Adapter);
++
++VOID rtl8192d_dm_CheckTXPowerTracking(IN PADAPTER Adapter);
++
++#endif	//__HAL8190PCIDM_H__
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192d_hal.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192d_hal.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192d_hal.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192d_hal.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,1126 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __RTL8192D_HAL_H__
++#define __RTL8192D_HAL_H__
++
++#include "hal_com.h"
++#include "rtl8192d_spec.h"
++#include "Hal8192DPhyReg.h"
++#include "Hal8192DPhyCfg.h"
++#include "rtl8192d_rf.h"
++#include "rtl8192d_dm.h"
++#include "rtl8192d_recv.h"
++#include "rtl8192d_xmit.h"
++#include "rtl8192d_cmd.h"
++
++/*---------------------------Define Local Constant---------------------------*/
++/* Channel switch:The size of command tables for switch channel*/
++#define MAX_PRECMD_CNT 16
++#define MAX_RFDEPENDCMD_CNT 16
++#define MAX_POSTCMD_CNT 16
++
++#define MAX_DOZE_WAITING_TIMES_9x 64
++
++#define MAX_RF_IMR_INDEX 12
++#define MAX_RF_IMR_INDEX_NORMAL 13
++#define RF_REG_NUM_for_C_CUT_5G 	6
++#define RF_REG_NUM_for_C_CUT_5G_internalPA	7
++#define RF_REG_NUM_for_C_CUT_2G 	5
++#define RF_CHNL_NUM_5G			19	
++#define RF_CHNL_NUM_5G_40M		17
++#define TARGET_CHNL_NUM_5G	221
++#define TARGET_CHNL_NUM_2G	14
++#define TARGET_CHNL_NUM_2G_5G	59
++#define CV_CURVE_CNT			64
++
++//static u32	 RF_REG_FOR_5G_SWCHNL[MAX_RF_IMR_INDEX]={0,0x2f,0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x38,0x39,0x0};
++static u32	   RF_REG_FOR_5G_SWCHNL_NORMAL[MAX_RF_IMR_INDEX_NORMAL]={0,0x2f,0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37,0x38,0x39,0x0};
++
++static u8	RF_REG_for_C_CUT_5G[RF_REG_NUM_for_C_CUT_5G] = 
++			{RF_SYN_G1, RF_SYN_G2,	RF_SYN_G3,	RF_SYN_G4,	RF_SYN_G5,	RF_SYN_G6};
++
++static u8	RF_REG_for_C_CUT_5G_internalPA[RF_REG_NUM_for_C_CUT_5G_internalPA] = 
++			{0x0B,	0x48,	0x49,	0x4B,	0x03,	0x04,	0x0E};
++static u8	RF_REG_for_C_CUT_2G[RF_REG_NUM_for_C_CUT_2G] = 
++			{RF_SYN_G1, RF_SYN_G2,	RF_SYN_G3,	RF_SYN_G7,	RF_SYN_G8};
++
++#if DBG
++static u32	RF_REG_MASK_for_C_CUT_2G[RF_REG_NUM_for_C_CUT_2G] = 
++			{BIT19|BIT18|BIT17|BIT14|BIT1,	BIT10|BIT9, 
++			BIT18|BIT17|BIT16|BIT1, 	BIT2|BIT1,	
++			BIT15|BIT14|BIT13|BIT12|BIT11};
++#endif	//amy, temp remove
++static u8	RF_CHNL_5G[RF_CHNL_NUM_5G] = 
++			{36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140};
++static u8	RF_CHNL_5G_40M[RF_CHNL_NUM_5G_40M] = 
++			{38,42,46,50,54,58,62,102,106,110,114,118,122,126,130,134,138};
++
++static u32	RF_REG_Param_for_C_CUT_5G[5][RF_REG_NUM_for_C_CUT_5G] = {
++			{0xE43BE,	0xFC638,	0x77C0A,	0xDE471,	0xd7110,	0x8EB04},
++			{0xE43BE,	0xFC078,	0xF7C1A,	0xE0C71,	0xD7550,	0xAEB04},	
++			{0xE43BF,	0xFF038,	0xF7C0A,	0xDE471,	0xE5550,	0xAEB04},
++			{0xE43BF,	0xFF079,	0xF7C1A,	0xDE471,	0xE5550,	0xAEB04},
++			{0xE43BF,	0xFF038,	0xF7C1A,	0xDE471,	0xd7550,	0xAEB04}};
++
++static u32	RF_REG_Param_for_C_CUT_2G[3][RF_REG_NUM_for_C_CUT_2G] = {
++			{0x643BC,	0xFC038,	0x77C1A,	0x41289,	0x01840},
++			{0x643BC,	0xFC038,	0x07C1A,	0x41289,	0x01840},
++			{0x243BC,	0xFC438,	0x07C1A,	0x4128B,	0x0FC41}};
++
++#if SWLCK == 1
++static u32 RF_REG_SYN_G4_for_C_CUT_2G = 0xD1C31&0x7FF;
++#endif
++
++static u32	RF_REG_Param_for_C_CUT_5G_internalPA[3][RF_REG_NUM_for_C_CUT_5G_internalPA] = {
++			{0x01a00,	0x40443,	0x00eb5,	0x89bec,	0x94a12,	0x94a12,	0x94a12},
++			{0x01800,	0xc0443,	0x00730,	0x896ee,	0x94a52,	0x94a52,	0x94a52},	
++			{0x01800,	0xc0443,	0x00730,	0x896ee,	0x94a12,	0x94a12,	0x94a12}};
++
++
++
++//[mode][patha+b][reg]
++static u32 RF_IMR_Param_Normal[1][3][MAX_RF_IMR_INDEX_NORMAL]={{
++	{0x70000,0x00ff0,0x4400f,0x00ff0,0x0,0x0,0x0,0x0,0x0,0x64888,0xe266c,0x00090,0x22fff},// channel 1-14.
++	{0x70000,0x22880,0x4470f,0x55880,0x00070, 0x88000, 0x0,0x88080,0x70000,0x64a82,0xe466c,0x00090,0x32c9a}, //path 36-64
++	{0x70000,0x44880,0x4477f,0x77880,0x00070, 0x88000, 0x0,0x880b0,0x0,0x64b82,0xe466c,0x00090,0x32c9a} //100 -165
++}
++};
++
++//static u32 CurveIndex_5G[TARGET_CHNL_NUM_5G]={0};
++//static u32 CurveIndex_2G[TARGET_CHNL_NUM_2G]={0};
++static u32 CurveIndex[TARGET_CHNL_NUM_2G_5G]={0};
++
++static u32 TargetChnl_5G[TARGET_CHNL_NUM_5G] = {
++25141,	25116,	25091,	25066,	25041,
++25016,	24991,	24966,	24941,	24917,
++24892,	24867,	24843,	24818,	24794,
++24770,	24765,	24721,	24697,	24672,
++24648,	24624,	24600,	24576,	24552,
++24528,	24504,	24480,	24457,	24433,
++24409,	24385,	24362,	24338,	24315,
++24291,	24268,	24245,	24221,	24198,
++24175,	24151,	24128,	24105,	24082,
++24059,	24036,	24013,	23990,	23967,
++23945,	23922,	23899,	23876,	23854,
++23831,	23809,	23786,	23764,	23741,
++23719,	23697,	23674,	23652,	23630,
++23608,	23586,	23564,	23541,	23519,
++23498,	23476,	23454,	23432,	23410,
++23388,	23367,	23345,	23323,	23302,
++23280,	23259,	23237,	23216,	23194,
++23173,	23152,	23130,	23109,	23088,
++23067,	23046,	23025,	23003,	22982,
++22962,	22941,	22920,	22899,	22878,
++22857,	22837,	22816,	22795,	22775,
++22754,	22733,	22713,	22692,	22672,
++22652,	22631,	22611,	22591,	22570,
++22550,	22530,	22510,	22490,	22469,
++22449,	22429,	22409,	22390,	22370,
++22350,	22336,	22310,	22290,	22271,
++22251,	22231,	22212,	22192,	22173,
++22153,	22134,	22114,	22095,	22075,
++22056,	22037,	22017,	21998,	21979,
++21960,	21941,	21921,	21902,	21883,
++21864,	21845,	21826,	21807,	21789,
++21770,	21751,	21732,	21713,	21695,
++21676,	21657,	21639,	21620,	21602,
++21583,	21565,	21546,	21528,	21509,
++21491,	21473,	21454,	21436,	21418,
++21400,	21381,	21363,	21345,	21327,
++21309,	21291,	21273,	21255,	21237,
++21219,	21201,	21183,	21166,	21148,
++21130,	21112,	21095,	21077,	21059,
++21042,	21024,	21007,	20989,	20972,
++25679,	25653,	25627,	25601,	25575,
++25549,	25523,	25497,	25471,	25446,
++25420,	25394,	25369,	25343,	25318,
++25292,	25267,	25242,	25216,	25191,
++25166	};
++
++static u32 TargetChnl_2G[TARGET_CHNL_NUM_2G] = {	// channel 1~14
++26084, 26030, 25976, 25923, 25869, 25816, 25764,
++25711, 25658, 25606, 25554, 25502, 25451, 25328
++};
++
++
++#ifdef CONFIG_PCI_HCI
++	#include <pci_ops.h>
++	#include "Hal8192DEHWImg.h"
++
++	#define RTL819X_DEFAULT_RF_TYPE			RF_2T2R
++
++//---------------------------------------------------------------------
++//		RTL8192DE From file
++//---------------------------------------------------------------------
++	#define RTL8192D_FW_IMG 					"rtl8192DE\\rtl8192dfw.bin"
++
++	#define RTL8192D_PHY_REG					"rtl8192DE\\PHY_REG.txt"
++	#define RTL8192D_PHY_REG_PG				"rtl8192DE\\PHY_REG_PG.txt"
++	#define RTL8192D_PHY_REG_MP				"rtl8192DE\\PHY_REG_MP.txt"
++	
++	#define RTL8192D_AGC_TAB					"rtl8192DE\\AGC_TAB.txt"
++	#define RTL8192D_AGC_TAB_2G				"rtl8192DE\\AGC_TAB_2G.txt"
++	#define RTL8192D_AGC_TAB_5G				"rtl8192DE\\AGC_TAB_5G.txt"
++	#define RTL8192D_PHY_RADIO_A				"rtl8192DE\\radio_a.txt"
++	#define RTL8192D_PHY_RADIO_B				"rtl8192DE\\radio_b.txt"
++	#define RTL8192D_PHY_RADIO_A_intPA		"rtl8192DE\\radio_a_intPA.txt"
++	#define RTL8192D_PHY_RADIO_B_intPA		"rtl8192DE\\radio_b_intPA.txt"			
++	#define RTL8192D_PHY_MACREG				"rtl8192DE\\MAC_REG.txt"
++
++//---------------------------------------------------------------------
++//		RTL8192DE From header
++//---------------------------------------------------------------------
++
++	// Fw Array
++	#define Rtl8192D_FwImageArray 				Rtl8192DEFwImgArray
++
++	// MAC/BB/PHY Array
++	#define Rtl8192D_MAC_Array					Rtl8192DEMAC_2T_Array
++	#define Rtl8192D_AGCTAB_Array				Rtl8192DEAGCTAB_Array
++	#define Rtl8192D_AGCTAB_5GArray			Rtl8192DEAGCTAB_5GArray
++	#define Rtl8192D_AGCTAB_2GArray			Rtl8192DEAGCTAB_2GArray
++	#define Rtl8192D_AGCTAB_2TArray 			Rtl8192DEAGCTAB_2TArray
++	#define Rtl8192D_AGCTAB_1TArray 			Rtl8192DEAGCTAB_1TArray
++	#define Rtl8192D_PHY_REG_2TArray			Rtl8192DEPHY_REG_2TArray		
++	#define Rtl8192D_PHY_REG_1TArray			Rtl8192DEPHY_REG_1TArray
++	#define Rtl8192D_PHY_REG_Array_PG			Rtl8192DEPHY_REG_Array_PG
++	#define Rtl8192D_PHY_REG_Array_MP			Rtl8192DEPHY_REG_Array_MP
++	#define Rtl8192D_RadioA_2TArray				Rtl8192DERadioA_2TArray
++	#define Rtl8192D_RadioA_1TArray				Rtl8192DERadioA_1TArray
++	#define Rtl8192D_RadioB_2TArray				Rtl8192DERadioB_2TArray
++	#define Rtl8192D_RadioB_1TArray				Rtl8192DERadioB_1TArray
++	#define Rtl8192D_RadioA_2T_intPAArray		Rtl8192DERadioA_2T_intPAArray
++	#define Rtl8192D_RadioB_2T_intPAArray 		Rtl8192DERadioB_2T_intPAArray
++
++	// Array length
++	#define Rtl8192D_FwImageArrayLength				Rtl8192DEImgArrayLength
++	#define Rtl8192D_MAC_ArrayLength				Rtl8192DEMAC_2T_ArrayLength
++	#define Rtl8192D_AGCTAB_5GArrayLength			Rtl8192DEAGCTAB_5GArrayLength
++	#define Rtl8192D_AGCTAB_2GArrayLength			Rtl8192DEAGCTAB_2GArrayLength
++	#define Rtl8192D_AGCTAB_2TArrayLength			Rtl8192DEAGCTAB_2TArrayLength
++	#define Rtl8192D_AGCTAB_1TArrayLength			Rtl8192DEAGCTAB_1TArrayLength
++	#define Rtl8192D_AGCTAB_ArrayLength 			Rtl8192DEAGCTAB_ArrayLength
++	#define Rtl8192D_PHY_REG_2TArrayLength			Rtl8192DEPHY_REG_2TArrayLength
++	#define Rtl8192D_PHY_REG_1TArrayLength			Rtl8192DEPHY_REG_1TArrayLength
++	#define Rtl8192D_PHY_REG_Array_PGLength		Rtl8192DEPHY_REG_Array_PGLength
++	#define Rtl8192D_PHY_REG_Array_MPLength		Rtl8192DEPHY_REG_Array_MPLength
++	#define Rtl8192D_RadioA_2TArrayLength			Rtl8192DERadioA_2TArrayLength
++	#define Rtl8192D_RadioB_2TArrayLength			Rtl8192DERadioB_2TArrayLength
++	#define Rtl8192D_RadioA_2T_intPAArrayLength		Rtl8192DERadioA_2T_intPAArrayLength
++	#define Rtl8192D_RadioB_2T_intPAArrayLength		Rtl8192DERadioB_2T_intPAArrayLength
++
++#elif defined(CONFIG_USB_HCI)
++
++	#include "Hal8192DUHWImg.h"
++#ifdef CONFIG_WOWLAN
++	#include "Hal8192DUHWImg_wowlan.h"
++#endif //CONFIG_WOWLAN
++	#define RTL819X_DEFAULT_RF_TYPE		RF_1T2R
++
++//---------------------------------------------------------------------
++//		RTL8192DU From file
++//---------------------------------------------------------------------
++	#define RTL8192D_FW_IMG					"rtl8192DU\\rtl8192dfw.bin"
++
++	#define RTL8192D_PHY_REG					"rtl8192DU\\PHY_REG.txt"
++	#define RTL8192D_PHY_REG_PG				"rtl8192DU\\PHY_REG_PG.txt"
++	#define RTL8192D_PHY_REG_MP				"rtl8192DU\\PHY_REG_MP.txt"			
++	
++	#define RTL8192D_AGC_TAB					"rtl8192DU\\AGC_TAB.txt"
++	#define RTL8192D_AGC_TAB_2G				"rtl8192DU\\AGC_TAB_2G.txt"
++	#define RTL8192D_AGC_TAB_5G				"rtl8192DU\\AGC_TAB_5G.txt"
++	#define RTL8192D_PHY_RADIO_A				"rtl8192DU\\radio_a.txt"
++	#define RTL8192D_PHY_RADIO_B				"rtl8192DU\\radio_b.txt"
++	#define RTL8192D_PHY_RADIO_A_intPA		"rtl8192DU\\radio_a_intPA.txt"
++	#define RTL8192D_PHY_RADIO_B_intPA		"rtl8192DU\\radio_b_intPA.txt"
++	#define RTL8192D_PHY_MACREG				"rtl8192DU\\MAC_REG.txt"
++
++//---------------------------------------------------------------------
++//		RTL8192DU From header
++//---------------------------------------------------------------------
++		
++	// Fw Array
++	#define Rtl8192D_FwImageArray 					Rtl8192DUFwImgArray
++#ifdef CONFIG_WOWLAN
++	#define Rtl8192D_FwWWImageArray				Rtl8192DUFwWWImgArray
++#endif //CONFIG_WOWLAN
++	// MAC/BB/PHY Array
++	#define Rtl8192D_MAC_Array						Rtl8192DUMAC_2T_Array
++	#define Rtl8192D_AGCTAB_Array					Rtl8192DUAGCTAB_Array
++	#define Rtl8192D_AGCTAB_5GArray				Rtl8192DUAGCTAB_5GArray
++	#define Rtl8192D_AGCTAB_2GArray				Rtl8192DUAGCTAB_2GArray
++	#define Rtl8192D_AGCTAB_2TArray 				Rtl8192DUAGCTAB_2TArray
++	#define Rtl8192D_AGCTAB_1TArray 				Rtl8192DUAGCTAB_1TArray
++	#define Rtl8192D_PHY_REG_2TArray				Rtl8192DUPHY_REG_2TArray			
++	#define Rtl8192D_PHY_REG_1TArray				Rtl8192DUPHY_REG_1TArray
++	#define Rtl8192D_PHY_REG_Array_PG				Rtl8192DUPHY_REG_Array_PG
++	#define Rtl8192D_PHY_REG_Array_MP				Rtl8192DUPHY_REG_Array_MP
++	#define Rtl8192D_RadioA_2TArray					Rtl8192DURadioA_2TArray
++	#define Rtl8192D_RadioA_1TArray					Rtl8192DURadioA_1TArray
++	#define Rtl8192D_RadioB_2TArray					Rtl8192DURadioB_2TArray
++	#define Rtl8192D_RadioB_1TArray					Rtl8192DURadioB_1TArray
++	#define Rtl8192D_RadioA_2T_intPAArray			Rtl8192DURadioA_2T_intPAArray
++	#define Rtl8192D_RadioB_2T_intPAArray 			Rtl8192DURadioB_2T_intPAArray
++	
++	// Array length
++	#define Rtl8192D_FwImageArrayLength			Rtl8192DUImgArrayLength
++	#define Rtl8192D_MAC_ArrayLength				Rtl8192DUMAC_2T_ArrayLength
++	#define Rtl8192D_AGCTAB_5GArrayLength			Rtl8192DUAGCTAB_5GArrayLength
++	#define Rtl8192D_AGCTAB_2GArrayLength			Rtl8192DUAGCTAB_2GArrayLength
++	#define Rtl8192D_AGCTAB_2TArrayLength			Rtl8192DUAGCTAB_2TArrayLength
++	#define Rtl8192D_AGCTAB_1TArrayLength			Rtl8192DUAGCTAB_1TArrayLength
++	#define Rtl8192D_AGCTAB_ArrayLength 			Rtl8192DUAGCTAB_ArrayLength
++	#define Rtl8192D_PHY_REG_2TArrayLength			Rtl8192DUPHY_REG_2TArrayLength
++	#define Rtl8192D_PHY_REG_1TArrayLength			Rtl8192DUPHY_REG_1TArrayLength
++	#define Rtl8192D_PHY_REG_Array_PGLength		Rtl8192DUPHY_REG_Array_PGLength
++	#define Rtl8192D_PHY_REG_Array_MPLength		Rtl8192DUPHY_REG_Array_MPLength
++	#define Rtl8192D_RadioA_2TArrayLength			Rtl8192DURadioA_2TArrayLength
++	#define Rtl8192D_RadioB_2TArrayLength			Rtl8192DURadioB_2TArrayLength
++	#define Rtl8192D_RadioA_2T_intPAArrayLength		Rtl8192DURadioA_2T_intPAArrayLength			
++	#define Rtl8192D_RadioB_2T_intPAArrayLength		Rtl8192DURadioB_2T_intPAArrayLength
++
++	// The file name "_2T" is for 92CU, "_1T"  is for 88CU. Modified by tynli. 2009.11.24.
++/*	#define Rtl819XFwImageArray					Rtl8192DUFwImgArray
++	#define Rtl819XMAC_Array					Rtl8192DUMAC_2TArray
++	#define Rtl819XAGCTAB_Array					Rtl8192DUAGCTAB_Array
++	#define Rtl819XAGCTAB_5GArray				Rtl8192DUAGCTAB_5GArray
++	#define Rtl819XAGCTAB_2GArray				Rtl8192DUAGCTAB_2GArray
++	#define Rtl819XPHY_REG_2TArray				Rtl8192DUPHY_REG_2TArray
++	#define Rtl819XPHY_REG_1TArray				Rtl8192DUPHY_REG_1TArray
++	#define Rtl819XRadioA_2TArray				Rtl8192DURadioA_2TArray
++	#define Rtl819XRadioA_1TArray				Rtl8192DURadioA_1TArray
++	#define Rtl819XRadioA_2T_intPAArray 			Rtl8192DURadioA_2T_intPAArray
++	#define Rtl819XRadioB_2TArray				Rtl8192DURadioB_2TArray
++	#define Rtl819XRadioB_1TArray				Rtl8192DURadioB_1TArray
++	#define Rtl819XRadioB_2T_intPAArray 			Rtl8192DURadioB_2T_intPAArray
++	#define Rtl819XPHY_REG_Array_PG 			Rtl8192DUPHY_REG_Array_PG
++	#define Rtl819XPHY_REG_Array_MP 			Rtl8192DUPHY_REG_Array_MP
++
++	#define Rtl819XAGCTAB_2TArray				Rtl8192DUAGCTAB_2TArray
++	#define Rtl819XAGCTAB_1TArray				Rtl8192DUAGCTAB_1TArray*/
++
++#endif
++
++#define DRVINFO_SZ	4 // unit is 8bytes
++#define PageNum_128(_Len)		(u32)(((_Len)>>7) + ((_Len)&0x7F ? 1:0))
++
++//
++// Check if FW header exists. We do not consider the lower 4 bits in this case. 
++// By tynli. 2009.12.04.
++//
++#define IS_FW_HEADER_EXIST(_pFwHdr)	((le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x92C0 ||\
++									(le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x88C0 ||\
++									(le16_to_cpu(_pFwHdr->Signature)&0xFFFF) == 0x92D0 ||\
++									(le16_to_cpu(_pFwHdr->Signature)&0xFFFF) == 0x92D1 ||\
++									(le16_to_cpu(_pFwHdr->Signature)&0xFFFF) == 0x92D2 ||\
++									(le16_to_cpu(_pFwHdr->Signature)&0xFFFF) == 0x92D3 )
++
++#define FW_8192D_SIZE				0x8020 // Max FW len = 32k + 32(FW header length).
++#define FW_8192D_START_ADDRESS	0x1000
++#define FW_8192D_END_ADDRESS		0x1FFF
++
++#define MAX_PAGE_SIZE				4096	// @ page : 4k bytes
++
++typedef enum _FIRMWARE_SOURCE{
++	FW_SOURCE_IMG_FILE = 0,
++	FW_SOURCE_HEADER_FILE = 1,		//from header file
++}FIRMWARE_SOURCE, *PFIRMWARE_SOURCE;
++
++typedef struct _RT_FIRMWARE{
++	FIRMWARE_SOURCE	eFWSource;
++	u8*			szFwBuffer;
++	u32			ulFwLength;
++#ifdef CONFIG_WOWLAN
++	u8*			szWoWLANFwBuffer;
++	u32			ulWoWLANFwLength;
++#endif //CONFIG_WOWLAN
++}RT_FIRMWARE, *PRT_FIRMWARE, RT_FIRMWARE_92D, *PRT_FIRMWARE_92D;
++
++//
++// This structure must be cared byte-ordering
++//
++// Added by tynli. 2009.12.04.
++typedef struct _RT_8192D_FIRMWARE_HDR {//8-byte alinment required
++
++	//--- LONG WORD 0 ----
++	u16		Signature;	// 92C0: test chip; 92C, 88C0: test chip; 88C1: MP A-cut; 92C1: MP A-cut
++	u8		Category;	// AP/NIC and USB/PCI
++	u8		Function;	// Reserved for different FW function indcation, for further use when driver needs to download different FW in different conditions
++	u16		Version;		// FW Version
++	u8		Subversion;	// FW Subversion, default 0x00
++	u8		Rsvd1;
++
++
++	//--- LONG WORD 1 ----
++	u8		Month;	// Release time Month field
++	u8		Date;	// Release time Date field
++	u8		Hour;	// Release time Hour field
++	u8		Minute;	// Release time Minute field
++	u16		RamCodeSize;	// The size of RAM code
++	u16		Rsvd2;
++
++	//--- LONG WORD 2 ----
++	u32		SvnIdx;	// The SVN entry index
++	u32		Rsvd3;
++
++	//--- LONG WORD 3 ----
++	u32		Rsvd4;
++	u32		Rsvd5;
++
++}RT_8192D_FIRMWARE_HDR, *PRT_8192D_FIRMWARE_HDR;
++
++#define DRIVER_EARLY_INT_TIME		0x05
++#define BCN_DMA_ATIME_INT_TIME		0x02
++
++typedef	enum _BT_CoType{
++	BT_2Wire			= 0,		
++	BT_ISSC_3Wire	= 1,
++	BT_Accel			= 2,
++	BT_CSR			= 3,
++	BT_CSR_ENHAN	= 4,
++	BT_RTL8756		= 5,
++} BT_CoType, *PBT_CoType;
++
++typedef	enum _BT_CurState{
++	BT_OFF		= 0,	
++	BT_ON		= 1,
++} BT_CurState, *PBT_CurState;
++
++typedef	enum _BT_ServiceType{
++	BT_SCO			= 0,	
++	BT_A2DP			= 1,
++	BT_HID			= 2,
++	BT_HID_Idle		= 3,
++	BT_Scan			= 4,
++	BT_Idle			= 5,
++	BT_OtherAction	= 6,
++	BT_Busy			= 7,
++	BT_OtherBusy		= 8,
++} BT_ServiceType, *PBT_ServiceType;
++
++typedef	enum _BT_RadioShared{
++	BT_Radio_Shared 	= 0,	
++	BT_Radio_Individual	= 1,
++} BT_RadioShared, *PBT_RadioShared;
++
++typedef struct _BT_COEXIST_STR{
++	u8					BluetoothCoexist;
++	u8					BT_Ant_Num;
++	u8					BT_CoexistType;
++	u8					BT_State;
++	u8					BT_CUR_State;		//0:on, 1:off
++	u8					BT_Ant_isolation;	//0:good, 1:bad
++	u8					BT_PapeCtrl;		//0:SW, 1:SW/HW dynamic
++	u8					BT_Service;			
++	u8					BT_RadioSharedType;
++	u8					Ratio_Tx;
++	u8					Ratio_PRI;
++}BT_COEXIST_STR, *PBT_COEXIST_STR;
++
++//Added for 92D IQK setting.
++typedef struct _IQK_MATRIX_REGS_SETTING{
++	BOOLEAN 	bIQKDone;
++#if 1
++	int		Value[1][IQK_Matrix_REG_NUM];
++#else	
++	u32		Mark[IQK_Matrix_REG_NUM];
++	u32		Value[IQK_Matrix_REG_NUM];
++#endif	
++}IQK_MATRIX_REGS_SETTING,*PIQK_MATRIX_REGS_SETTING;
++
++#ifdef CONFIG_USB_RX_AGGREGATION
++
++typedef enum _USB_RX_AGG_MODE{
++	USB_RX_AGG_DISABLE,
++	USB_RX_AGG_DMA,
++	USB_RX_AGG_USB,
++	USB_RX_AGG_DMA_USB
++}USB_RX_AGG_MODE;
++
++#define MAX_RX_DMA_BUFFER_SIZE	10240		// 10K for 8192C RX DMA buffer
++
++#endif
++
++
++#define TX_SELE_HQ			BIT(0)		// High Queue
++#define TX_SELE_LQ			BIT(1)		// Low Queue
++#define TX_SELE_NQ			BIT(2)		// Normal Queue
++
++
++// Note: We will divide number of page equally for each queue other than public queue!
++
++#define TX_TOTAL_PAGE_NUMBER		0xF8
++#define TX_PAGE_BOUNDARY			(TX_TOTAL_PAGE_NUMBER + 1)
++
++// For Normal Chip Setting
++// (HPQ + LPQ + NPQ + PUBQ) shall be TX_TOTAL_PAGE_NUMBER
++#define NORMAL_PAGE_NUM_PUBQ		0x56
++
++
++// For Test Chip Setting
++// (HPQ + LPQ + PUBQ) shall be TX_TOTAL_PAGE_NUMBER
++#define TEST_PAGE_NUM_PUBQ_92DU			0x89
++#define TX_TOTAL_PAGE_NUMBER_92D_DUAL_MAC		0x7A
++#define NORMAL_PAGE_NUM_PUBQ_92D_DUAL_MAC			0x5A
++#define NORMAL_PAGE_NUM_HPQ_92D_DUAL_MAC			0x10
++#define NORMAL_PAGE_NUM_LPQ_92D_DUAL_MAC			0x10
++#define NORMAL_PAGE_NUM_NORMALQ_92D_DUAL_MAC		0
++
++#define TX_PAGE_BOUNDARY_DUAL_MAC			(TX_TOTAL_PAGE_NUMBER_92D_DUAL_MAC + 1)
++
++// For Test Chip Setting
++#define WMM_TEST_TX_TOTAL_PAGE_NUMBER	0xF5
++#define WMM_TEST_TX_PAGE_BOUNDARY	(WMM_TEST_TX_TOTAL_PAGE_NUMBER + 1) //F6
++
++#define WMM_TEST_PAGE_NUM_PUBQ		0xA3
++#define WMM_TEST_PAGE_NUM_HPQ		0x29
++#define WMM_TEST_PAGE_NUM_LPQ		0x29
++
++
++//Note: For Normal Chip Setting ,modify later
++#define WMM_NORMAL_TX_TOTAL_PAGE_NUMBER	0xF5
++#define WMM_NORMAL_TX_PAGE_BOUNDARY	(WMM_TEST_TX_TOTAL_PAGE_NUMBER + 1) //F6
++
++#define WMM_NORMAL_PAGE_NUM_PUBQ_92D		0X65//0x82
++#define WMM_NORMAL_PAGE_NUM_HPQ_92D		0X30//0x29
++#define WMM_NORMAL_PAGE_NUM_LPQ_92D		0X30
++#define WMM_NORMAL_PAGE_NUM_NPQ_92D		0X30
++
++#define WMM_NORMAL_PAGE_NUM_PUBQ_92D_DUAL_MAC		0X32
++#define WMM_NORMAL_PAGE_NUM_HPQ_92D_DUAL_MAC		0X18
++#define WMM_NORMAL_PAGE_NUM_LPQ_92D_DUAL_MAC		0X18
++#define WMM_NORMAL_PAGE_NUM_NPQ_92D_DUAL_MAC		0X18
++
++//-------------------------------------------------------------------------
++//	Chip specific
++//-------------------------------------------------------------------------
++
++#define CHIP_BONDING_IDENTIFIER(_value)	(((_value)>>22)&0x3)
++#define CHIP_BONDING_92C_1T2R	0x1
++#define CHIP_BONDING_88C_USB_MCARD	0x2
++#define CHIP_BONDING_88C_USB_HP	0x1
++
++//
++// 2011.01.06. Define new structure of chip version for RTL8723 and so on. Added by tynli.
++//
++/*
++     | BIT15:12           |  BIT11:8        | BIT 7              |  BIT6:4  |      BIT3          | BIT2:0  |
++     |-------------+-----------+-----------+-------+-----------+-------|
++     | IC version(CUT)  | ROM version  | Manufacturer  | RF type  |  Chip type       | IC Type |
++     |                           |                      | TSMC/UMC    |              | TEST/NORMAL|             |
++*/
++// [15:12] IC version(CUT): A-cut=0, B-cut=1, C-cut=2, D-cut=3
++// [7] Manufacturer: TSMC=0, UMC=1
++// [6:4] RF type: 1T1R=0, 1T2R=1, 2T2R=2
++// [3] Chip type: TEST=0, NORMAL=1
++// [2:0] IC type: 81xxC=0, 8723=1, 92D=2
++
++#define CHIP_8723						BIT(0)
++#define CHIP_92D						BIT(1)
++#define NORMAL_CHIP  					BIT(3)
++#define RF_TYPE_1T1R					(~(BIT(4)|BIT(5)|BIT(6)))
++#define RF_TYPE_1T2R					BIT(4)
++#define RF_TYPE_2T2R					BIT(5)
++#define CHIP_VENDOR_UMC				BIT(7)
++#define B_CUT_VERSION					BIT(12)
++#define C_CUT_VERSION					BIT(13)
++#define D_CUT_VERSION					((BIT(12)|BIT(13)))
++#define E_CUT_VERSION					BIT(14)
++
++
++// MASK
++#define IC_TYPE_MASK					(BIT(0)|BIT(1)|BIT(2))
++#define CHIP_TYPE_MASK 				BIT(3)
++#define RF_TYPE_MASK					(BIT(4)|BIT(5)|BIT(6))
++#define MANUFACTUER_MASK			BIT(7)	
++#define ROM_VERSION_MASK				(BIT(11)|BIT(10)|BIT(9)|BIT(8))
++#define CUT_VERSION_MASK				(BIT(15)|BIT(14)|BIT(13)|BIT(12))
++
++// Get element
++#define GET_CVID_IC_TYPE(version)			((version) & IC_TYPE_MASK)
++#define GET_CVID_CHIP_TYPE(version)			((version) & CHIP_TYPE_MASK)
++#define GET_CVID_RF_TYPE(version)			((version) & RF_TYPE_MASK)
++#define GET_CVID_MANUFACTUER(version)		((version) & MANUFACTUER_MASK)
++#define GET_CVID_ROM_VERSION(version)		((version) & ROM_VERSION_MASK)
++#define GET_CVID_CUT_VERSION(version)		((version) & CUT_VERSION_MASK)
++
++#define IS_81XXC(version)					((GET_CVID_IC_TYPE(version) == 0)? _TRUE : _FALSE)
++#define IS_8723_SERIES(version)				((GET_CVID_IC_TYPE(version) == CHIP_8723)? _TRUE : _FALSE)
++#define IS_92D(version)						((GET_CVID_IC_TYPE(version) == CHIP_92D)? _TRUE : _FALSE)
++#define IS_1T1R(version)						((GET_CVID_RF_TYPE(version))? _FALSE : _TRUE)
++#define IS_1T2R(version)						((GET_CVID_RF_TYPE(version) == RF_TYPE_1T2R)? _TRUE : _FALSE)
++#define IS_2T2R(version)						((GET_CVID_RF_TYPE(version) == RF_TYPE_2T2R)? _TRUE : _FALSE)
++#define IS_CHIP_VENDOR_UMC(version)			((GET_CVID_MANUFACTUER(version))? _TRUE: _FALSE)
++
++#define IS_92C_SERIAL(version)   				((IS_81XXC(version) && IS_2T2R(version)) ? _TRUE : _FALSE)
++#define IS_VENDOR_UMC_A_CUT(version)		((IS_CHIP_VENDOR_UMC(version)) ? ((GET_CVID_CUT_VERSION(version)) ? _FALSE : _TRUE) : _FALSE)
++#define IS_VENDOR_8723_A_CUT(version)		((IS_8723_SERIES(version)) ? ((GET_CVID_CUT_VERSION(version)) ? _FALSE : _TRUE) : _FALSE)
++// <tynli_Note> 88/92C UMC B-cut vendor is set to TSMC so we need to check CHIP_VENDOR_UMC bit is not 1. 
++#define IS_81xxC_VENDOR_UMC_B_CUT(version)	((IS_CHIP_VENDOR_UMC(version)) ? ((GET_CVID_CUT_VERSION(version) == B_CUT_VERSION) ? _TRUE : _FALSE):_FALSE)
++#define IS_92D_SINGLEPHY(version)     			((IS_92D(version)) ? (IS_2T2R(version) ? _TRUE: _FALSE) : _FALSE)
++
++#define IS_92D_C_CUT(version)    			((IS_92D(version)) ? ((GET_CVID_CUT_VERSION(version) == C_CUT_VERSION) ? _TRUE : _FALSE) : _FALSE)
++#define IS_92D_D_CUT(version)    			((IS_92D(version)) ? ((GET_CVID_CUT_VERSION(version) == D_CUT_VERSION) ? _TRUE : _FALSE) : _FALSE)
++#define IS_92D_E_CUT(version)    			((IS_92D(version)) ? ((GET_CVID_CUT_VERSION(version) == E_CUT_VERSION) ? _TRUE : _FALSE) : _FALSE)
++#define IS_NORMAL_CHIP92D(version)		((GET_CVID_CHIP_TYPE(version))? _TRUE: _FALSE)
++
++typedef enum _VERSION_8192D{
++	VERSION_TEST_CHIP_88C = 0x0000,
++	VERSION_TEST_CHIP_92C = 0x0020,
++	VERSION_TEST_UMC_CHIP_8723 = 0x0081,
++	VERSION_NORMAL_TSMC_CHIP_88C = 0x0008, 
++	VERSION_NORMAL_TSMC_CHIP_92C = 0x0028,
++	VERSION_NORMAL_TSMC_CHIP_92C_1T2R = 0x0018,
++	VERSION_NORMAL_UMC_CHIP_88C_A_CUT = 0x0088,
++	VERSION_NORMAL_UMC_CHIP_92C_A_CUT = 0x00a8,
++	VERSION_NORMAL_UMC_CHIP_92C_1T2R_A_CUT = 0x0098,		
++	VERSION_NORMAL_UMC_CHIP_8723_1T1R_A_CUT = 0x0089,
++	VERSION_NORMAL_UMC_CHIP_8723_1T1R_B_CUT = 0x1089,	
++	VERSION_NORMAL_UMC_CHIP_88C_B_CUT = 0x1088, 
++	VERSION_NORMAL_UMC_CHIP_92C_B_CUT = 0x10a8, 
++	VERSION_NORMAL_UMC_CHIP_92C_1T2R_B_CUT = 0x1090, 
++	VERSION_TEST_CHIP_92D_SINGLEPHY= 0x0022,
++	VERSION_TEST_CHIP_92D_DUALPHY = 0x0002,
++	VERSION_NORMAL_CHIP_92D_SINGLEPHY= 0x002a,
++	VERSION_NORMAL_CHIP_92D_DUALPHY = 0x000a,
++	VERSION_NORMAL_CHIP_92D_C_CUT_SINGLEPHY = 0x202a,
++	VERSION_NORMAL_CHIP_92D_C_CUT_DUALPHY = 0x200a,
++	VERSION_NORMAL_CHIP_92D_D_CUT_SINGLEPHY = 0x302a,
++	VERSION_NORMAL_CHIP_92D_D_CUT_DUALPHY = 0x300a,
++	VERSION_NORMAL_CHIP_92D_E_CUT_SINGLEPHY = 0x402a,
++	VERSION_NORMAL_CHIP_92D_E_CUT_DUALPHY = 0x400a,
++}VERSION_8192D,*PVERSION_8192D;
++
++
++//-------------------------------------------------------------------------
++//	Channel Plan
++//-------------------------------------------------------------------------
++enum ChannelPlan{
++	CHPL_FCC	= 0,
++	CHPL_IC		= 1,
++	CHPL_ETSI	= 2,
++	CHPL_SPAIN	= 3,
++	CHPL_FRANCE	= 4,
++	CHPL_MKK	= 5,
++	CHPL_MKK1	= 6,
++	CHPL_ISRAEL	= 7,
++	CHPL_TELEC	= 8,
++	CHPL_GLOBAL	= 9,
++	CHPL_WORLD	= 10,
++};
++
++typedef struct _TxPowerInfo{
++	u8 CCKIndex[RF_PATH_MAX][CHANNEL_GROUP_MAX];
++	u8 HT40_1SIndex[RF_PATH_MAX][CHANNEL_GROUP_MAX];
++	u8 HT40_2SIndexDiff[RF_PATH_MAX][CHANNEL_GROUP_MAX];
++	s8 HT20IndexDiff[RF_PATH_MAX][CHANNEL_GROUP_MAX];
++	u8 OFDMIndexDiff[RF_PATH_MAX][CHANNEL_GROUP_MAX];
++	u8 HT40MaxOffset[RF_PATH_MAX][CHANNEL_GROUP_MAX];
++	u8 HT20MaxOffset[RF_PATH_MAX][CHANNEL_GROUP_MAX];
++	u8 TSSI_A[3];
++	u8 TSSI_B[3];
++	u8 TSSI_A_5G[3];		//5GL/5GM/5GH
++	u8 TSSI_B_5G[3];
++}TxPowerInfo, *PTxPowerInfo;
++
++#define EFUSE_REAL_CONTENT_LEN	1024
++#define EFUSE_MAP_LEN				256
++#define EFUSE_MAX_SECTION			32
++#define EFUSE_MAX_SECTION_BASE	16
++// <Roger_Notes> To prevent out of boundary programming case, leave 1byte and program full section
++// 9bytes + 1byt + 5bytes and pre 1byte.
++// For worst case:
++// | 2byte|----8bytes----|1byte|--7bytes--| //92D
++#define EFUSE_OOB_PROTECT_BYTES 	18 // PG data exclude header, dummy 7 bytes frome CP test and reserved 1byte.
++
++typedef enum _PA_MODE {
++	PA_MODE_EXTERNAL = 0x00,
++	PA_MODE_INTERNAL_SP3T = 0x01,
++	PA_MODE_INTERNAL_SPDT = 0x02	
++} PA_MODE;
++
++/* Copy from rtl8192c */
++enum c2h_id_8192d {
++	C2H_DBG = 0,
++	C2H_TSF = 1,
++	C2H_AP_RPT_RSP = 2,
++	C2H_CCX_TX_RPT = 3,
++	C2H_BT_RSSI = 4,
++	C2H_BT_OP_MODE = 5,
++	C2H_EXT_RA_RPT = 6,
++	C2H_HW_INFO_EXCH = 10,
++	C2H_C2H_H2C_TEST = 11,
++	C2H_BT_INFO = 12,
++	C2H_BT_MP_INFO = 15,
++	MAX_C2HEVENT
++};
++
++#ifdef CONFIG_PCI_HCI
++struct hal_data_8192de
++{
++	VERSION_8192D	VersionID;
++
++	// add for 92D Phy mode/mac/Band mode 
++	MACPHY_MODE_8192D	MacPhyMode92D;
++	BAND_TYPE	CurrentBandType92D;	//0:2.4G, 1:5G
++	BAND_TYPE	BandSet92D;
++	BOOLEAN		bIsVS;
++	BOOLEAN		bSupportRemoteWakeUp;
++	u8	AutoLoadStatusFor8192D;
++
++	BOOLEAN		bNOPG;
++
++	BOOLEAN       bMasterOfDMSP;
++	BOOLEAN       bSlaveOfDMSP;
++
++	u16	CustomerID;
++
++	u16	FirmwareVersion;
++	u16	FirmwareVersionRev;
++	u16	FirmwareSubVersion;
++
++	u32	IntrMask[2];
++	u32	IntrMaskToSet[2];
++
++	u32	DisabledFunctions;
++
++	//current WIFI_PHY values
++	u32	ReceiveConfig;
++	u32	TransmitConfig;
++	WIRELESS_MODE	CurrentWirelessMode;
++	HT_CHANNEL_WIDTH	CurrentChannelBW;
++	u8	CurrentChannel;
++	u8	nCur40MhzPrimeSC;// Control channel sub-carrier
++	u16	BasicRateSet;
++
++	//rf_ctrl
++	u8	rf_chip;
++	u8	rf_type;
++	u8	NumTotalRFPath;
++
++	//
++	// EEPROM setting.
++	//
++	u16	EEPROMVID;
++	u16	EEPROMDID;
++	u16	EEPROMSVID;
++	u16	EEPROMSMID;
++	u16	EEPROMChannelPlan;
++	u16	EEPROMVersion;
++
++	u8	EEPROMCustomerID;
++	u8	EEPROMBoardType;
++	u8	EEPROMRegulatory;
++
++	u8	EEPROMThermalMeter;
++
++	u8	EEPROMC9;
++	u8	EEPROMCC;
++	u8	PAMode;
++
++	u8	TxPwrLevelCck[RF_PATH_MAX][CHANNEL_MAX_NUMBER_2G];
++	u8	TxPwrLevelHT40_1S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];	// For HT 40MHZ pwr
++	u8	TxPwrLevelHT40_2S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];	// For HT 40MHZ pwr	
++	s8	TxPwrHt20Diff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];// HT 20<->40 Pwr diff
++	u8	TxPwrLegacyHtDiff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];// For HT<->legacy pwr diff
++	// For power group
++	u8	PwrGroupHT20[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
++	u8	PwrGroupHT40[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
++
++	u8	LegacyHTTxPowerDiff;// Legacy to HT rate power diff
++
++	u8	CrystalCap;	// CrystalCap.
++
++#ifdef CONFIG_BT_COEXIST
++	struct btcoexist_priv	bt_coexist;
++#endif
++
++	// Read/write are allow for following hardware information variables
++	u8	framesync;
++	u32	framesyncC34;
++	u8	framesyncMonitor;
++	u8	DefaultInitialGain[4];
++	u8	pwrGroupCnt;
++	u32	MCSTxPowerLevelOriginalOffset[MAX_PG_GROUP][16];
++	u32	CCKTxPowerLevelOriginalOffset;
++
++	u32	AntennaTxPath;					// Antenna path Tx
++	u32	AntennaRxPath;					// Antenna path Rx
++	u8	BluetoothCoexist;
++	u8	ExternalPA;
++	u8	InternalPA5G[2];	//pathA / pathB
++
++	//u32	LedControlNum;
++	//u32	LedControlMode;
++	//u32	TxPowerTrackControl;
++	u8	b1x1RecvCombine;	// for 1T1R receive combining
++
++	u8	bCurrentTurboEDCA;
++	u32	AcParam_BE; //Original parameter for BE, use for EDCA turbo.
++
++	//vivi, for tx power tracking, 20080407
++	//u16	TSSI_13dBm;
++	//u32	Pwr_Track;
++	// The current Tx Power Level
++	u8	CurrentCckTxPwrIdx;
++	u8	CurrentOfdm24GTxPwrIdx;
++
++	BB_REGISTER_DEFINITION_T	PHYRegDef[4];	//Radio A/B/C/D
++
++	BOOLEAN		bRFPathRxEnable[4];	// We support 4 RF path now.
++
++	u32	RfRegChnlVal[2];
++
++	u8	bCckHighPower;
++
++	BOOLEAN		bPhyValueInitReady;
++
++	BOOLEAN		bTXPowerDataReadFromEEPORM;
++
++	BOOLEAN		bInSetPower;
++
++	//RDG enable
++	BOOLEAN		bRDGEnable;
++
++	BOOLEAN		bLoadIMRandIQKSettingFor2G;// True if IMR or IQK  have done  for 2.4G in scan progress
++	BOOLEAN		bNeedIQK;
++
++	BOOLEAN		bLCKInProgress;
++
++	BOOLEAN		bEarlyModeEnable;
++
++#if 1
++	IQK_MATRIX_REGS_SETTING IQKMatrixRegSetting[IQK_Matrix_Settings_NUM];
++#else
++	//regc80¡¢regc94¡¢regc4c¡¢regc88¡¢regc9c¡¢regc14¡¢regca0¡¢regc1c¡¢regc78
++	u4Byte				IQKMatrixReg[IQK_Matrix_REG_NUM];
++	IQK_MATRIX_REGS_SETTING			   IQKMatrixRegSetting[IQK_Matrix_Settings_NUM];	// 1->2G,24->5G 20M channel,21->5G 40M channel.													
++#endif
++
++	//for host message to fw
++	u8	LastHMEBoxNum;
++
++	u8	fw_ractrl;
++	// Beacon function related global variable.
++	u32	RegBcnCtrlVal;
++	u8	RegTxPause;
++	u8	RegFwHwTxQCtrl;
++	u8	RegReg542;
++	u8	RegCR_1;
++
++	struct dm_priv	dmpriv;
++
++	u8	bInterruptMigration;
++
++	u8	FwRsvdPageStartOffset; //2010.06.23. Added by tynli. Reserve page start offset except beacon in TxQ.
++
++	// Add for dual MAC  0--Mac0 1--Mac1
++	u32	interfaceIndex;
++
++	u16	RegRRSR;
++
++	u16	EfuseUsedBytes;
++	u8	RTSInitRate;	 // 2010.11.24.by tynli.
++#ifdef CONFIG_P2P
++	struct P2P_PS_Offload_t	p2p_ps_offload;
++#endif //CONFIG_P2P
++};
++
++typedef struct hal_data_8192de HAL_DATA_TYPE, *PHAL_DATA_TYPE;
++
++//
++// Function disabled.
++//
++#define DF_TX_BIT		BIT0
++#define DF_RX_BIT		BIT1
++#define DF_IO_BIT		BIT2
++#define DF_IO_D3_BIT			BIT3
++
++#define RT_DF_TYPE		u32
++#define RT_DISABLE_FUNC(__pAdapter, __FuncBits) ((__pAdapter)->DisabledFunctions |= ((RT_DF_TYPE)(__FuncBits)))
++#define RT_ENABLE_FUNC(__pAdapter, __FuncBits) ((__pAdapter)->DisabledFunctions &= (~((RT_DF_TYPE)(__FuncBits))))
++#define RT_IS_FUNC_DISABLED(__pAdapter, __FuncBits) ( (__pAdapter)->DisabledFunctions & (__FuncBits) )
++
++void InterruptRecognized8192DE(PADAPTER Adapter, PRT_ISR_CONTENT pIsrContent);
++VOID UpdateInterruptMask8192DE(PADAPTER Adapter, u32 AddMSR, u32 RemoveMSR);
++#endif
++
++#ifdef CONFIG_USB_HCI
++
++//should be renamed and moved to another file
++typedef	enum _INTERFACE_SELECT_8192DUSB{
++	INTF_SEL0_USB 			= 0,		// USB
++	INTF_SEL1_MINICARD	= 1,		// Minicard
++	INTF_SEL2_EKB_PRO		= 2,		// Eee keyboard proprietary
++	INTF_SEL3_PRO			= 3,		// Customized proprietary
++} INTERFACE_SELECT_8192DUSB, *PINTERFACE_SELECT_8192DUSB;
++
++typedef INTERFACE_SELECT_8192DUSB INTERFACE_SELECT_USB;
++
++struct hal_data_8192du
++{
++	VERSION_8192D	VersionID;
++
++	// add for 92D Phy mode/mac/Band mode 
++	MACPHY_MODE_8192D	MacPhyMode92D;
++	BAND_TYPE	CurrentBandType92D;	//0:2.4G, 1:5G
++	BAND_TYPE	BandSet92D;
++	BOOLEAN		bIsVS;
++
++	BOOLEAN		bNOPG;
++
++	BOOLEAN		bSupportRemoteWakeUp;
++	BOOLEAN		bMasterOfDMSP;
++	BOOLEAN		bSlaveOfDMSP;
++#ifdef CONFIG_DUALMAC_CONCURRENT
++	BOOLEAN		bInModeSwitchProcess;
++#endif
++
++	u16	CustomerID;
++
++	u16	FirmwareVersion;
++	u16	FirmwareVersionRev;
++	u16	FirmwareSubVersion;
++
++	//current WIFI_PHY values
++	u32	ReceiveConfig;
++	WIRELESS_MODE	CurrentWirelessMode;
++	HT_CHANNEL_WIDTH	CurrentChannelBW;
++	u8	CurrentChannel;
++	u8	nCur40MhzPrimeSC;// Control channel sub-carrier
++	u16	BasicRateSet;
++
++	INTERFACE_SELECT_8192DUSB	InterfaceSel;
++
++	//rf_ctrl
++	u8	rf_chip;
++	u8	rf_type;
++	u8	NumTotalRFPath;
++
++	//
++	// EEPROM setting.
++	//
++	u8	EEPROMVersion;
++	u16	EEPROMVID;
++	u16	EEPROMPID;
++	u16	EEPROMSVID;
++	u16	EEPROMSDID;
++	u8	EEPROMCustomerID;
++	u8	EEPROMSubCustomerID;	
++	u8	EEPROMRegulatory;
++
++	u8	EEPROMThermalMeter;
++
++	u8	EEPROMC9;
++	u8	EEPROMCC;
++	u8	PAMode;
++
++	u8	TxPwrLevelCck[RF_PATH_MAX][CHANNEL_MAX_NUMBER_2G];
++	u8	TxPwrLevelHT40_1S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];	// For HT 40MHZ pwr
++	u8	TxPwrLevelHT40_2S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];	// For HT 40MHZ pwr	
++	s8	TxPwrHt20Diff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];// HT 20<->40 Pwr diff
++	u8	TxPwrLegacyHtDiff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];// For HT<->legacy pwr diff
++	// For power group
++	u8	PwrGroupHT20[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
++	u8	PwrGroupHT40[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
++
++	u8	LegacyHTTxPowerDiff;// Legacy to HT rate power diff
++
++	u8	CrystalCap;	// CrystalCap.
++
++#ifdef CONFIG_BT_COEXIST
++	struct btcoexist_priv	bt_coexist;
++#endif
++
++	// Read/write are allow for following hardware information variables
++	u8	framesync;
++	u32	framesyncC34;
++	u8	framesyncMonitor;
++	u8	DefaultInitialGain[4];
++	u8	pwrGroupCnt;
++	u32	MCSTxPowerLevelOriginalOffset[MAX_PG_GROUP][16];
++	u32	CCKTxPowerLevelOriginalOffset;
++
++	u32	AntennaTxPath;					// Antenna path Tx
++	u32	AntennaRxPath;					// Antenna path Rx
++	u8	BluetoothCoexist;
++	u8	ExternalPA;
++	u8	InternalPA5G[2];	//pathA / pathB
++
++	//u32	LedControlNum;
++	//u32	LedControlMode;
++	//u32	TxPowerTrackControl;
++	u8	b1x1RecvCombine;	// for 1T1R receive combining
++
++	u8	bCurrentTurboEDCA;
++	u32	AcParam_BE; //Original parameter for BE, use for EDCA turbo.
++
++	//vivi, for tx power tracking, 20080407
++	//u16	TSSI_13dBm;
++	//u32	Pwr_Track;
++	// The current Tx Power Level
++	u8	CurrentCckTxPwrIdx;
++	u8	CurrentOfdm24GTxPwrIdx;
++
++	BB_REGISTER_DEFINITION_T	PHYRegDef[4];	//Radio A/B/C/D
++
++	BOOLEAN		bRFPathRxEnable[4];	// We support 4 RF path now.
++
++	u32	RfRegChnlVal[2];
++
++	u8	bCckHighPower;
++
++	BOOLEAN		bPhyValueInitReady;
++
++	BOOLEAN		bTXPowerDataReadFromEEPORM;
++
++	BOOLEAN		bInSetPower;
++
++	//RDG enable
++	BOOLEAN		bRDGEnable;
++
++	BOOLEAN		bLoadIMRandIQKSettingFor2G;// True if IMR or IQK  have done  for 2.4G in scan progress
++	BOOLEAN		bNeedIQK;
++
++	BOOLEAN		bLCKInProgress;
++
++	BOOLEAN		bEarlyModeEnable;
++
++#if 1
++	IQK_MATRIX_REGS_SETTING IQKMatrixRegSetting[IQK_Matrix_Settings_NUM];
++#else
++	//regc80¡¢regc94¡¢regc4c¡¢regc88¡¢regc9c¡¢regc14¡¢regca0¡¢regc1c¡¢regc78
++	u4Byte				IQKMatrixReg[IQK_Matrix_REG_NUM];
++	IQK_MATRIX_REGS_SETTING			   IQKMatrixRegSetting[IQK_Matrix_Settings_NUM];	// 1->2G,24->5G 20M channel,21->5G 40M channel.													
++#endif
++
++	//for host message to fw
++	u8	LastHMEBoxNum;
++
++	u8	fw_ractrl;
++	// Beacon function related global variable.
++	u32	RegBcnCtrlVal;
++	u8	RegTxPause;
++	u8	RegFwHwTxQCtrl;
++	u8	RegReg542;
++	u8	RegCR_1;
++
++	struct dm_priv	dmpriv;
++
++	u8	FwRsvdPageStartOffset; //2010.06.23. Added by tynli. Reserve page start offset except beacon in TxQ.
++
++	//Query RF by FW
++	BOOLEAN		bReadRFbyFW;
++
++	// For 92C USB endpoint setting
++	//
++
++	u32	UsbBulkOutSize;
++
++	int	RtBulkOutPipe[3];
++	int	RtBulkInPipe;
++	int	RtIntInPipe;
++
++	// Add for dual MAC  0--Mac0 1--Mac1
++	u32	interfaceIndex;
++
++	u8	OutEpQueueSel;
++	u8	OutEpNumber;
++
++	u8	Queue2EPNum[8];//for out endpoint number mapping
++
++#ifdef CONFIG_USB_TX_AGGREGATION
++	u8	UsbTxAggMode;
++	u8	UsbTxAggDescNum;
++#endif
++#ifdef CONFIG_USB_RX_AGGREGATION
++	u16	HwRxPageSize;				// Hardware setting
++	u32	MaxUsbRxAggBlock;
++
++	USB_RX_AGG_MODE	UsbRxAggMode;
++	u8	UsbRxAggBlockCount;			// USB Block count. Block size is 512-byte in hight speed and 64-byte in full speed
++	u8	UsbRxAggBlockTimeout;
++	u8	UsbRxAggPageCount;			// 8192C DMA page count
++	u8	UsbRxAggPageTimeout;
++#endif
++
++	u16	RegRRSR;
++
++	u16	EfuseUsedBytes;
++	u8	RTSInitRate;	 // 2010.11.24.by tynli.
++#ifdef CONFIG_P2P
++	struct P2P_PS_Offload_t	p2p_ps_offload;
++#endif //CONFIG_P2P
++};
++
++typedef struct hal_data_8192du HAL_DATA_TYPE, *PHAL_DATA_TYPE;
++#endif
++
++#define GET_HAL_DATA(__pAdapter)	((HAL_DATA_TYPE *)((__pAdapter)->HalData))
++#define GET_RF_TYPE(priv)	(GET_HAL_DATA(priv)->rf_type)
++
++int FirmwareDownload92D(IN	PADAPTER Adapter,IN	BOOLEAN  bUsedWoWLANFw);
++VOID rtl8192d_FirmwareSelfReset(IN PADAPTER Adapter);
++void rtl8192d_ReadChipVersion(IN PADAPTER Adapter);
++VOID rtl8192d_EfuseParseChnlPlan(PADAPTER Adapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
++VOID rtl8192d_ReadTxPowerInfo(PADAPTER Adapter, u8* PROMContent, BOOLEAN AutoLoadFail);
++VOID rtl8192d_ResetDualMacSwitchVariables(IN PADAPTER Adapter);
++u8 GetEEPROMSize8192D(PADAPTER Adapter);
++BOOLEAN PHY_CheckPowerOffFor8192D(PADAPTER Adapter);
++VOID PHY_SetPowerOnFor8192D(PADAPTER Adapter);
++//void PHY_ConfigMacPhyMode92D(PADAPTER Adapter);
++void rtl8192d_free_hal_data(_adapter * padapter);
++void rtl8192d_set_hal_ops(struct hal_ops *pHalFunc);
++
++#endif
++
++#ifdef CONFIG_MP_INCLUDED
++
++
++extern void Hal_SetAntenna(PADAPTER pAdapter);
++extern void Hal_SetBandwidth(PADAPTER pAdapter);
++
++extern void Hal_SetTxPower(PADAPTER pAdapter);
++extern void Hal_SetCarrierSuppressionTx(PADAPTER pAdapter, u8 bStart);
++extern void Hal_SetSingleToneTx ( PADAPTER pAdapter , u8 bStart );
++extern void Hal_SetSingleCarrierTx (PADAPTER pAdapter, u8 bStart);
++extern void Hal_SetContinuousTx (PADAPTER pAdapter, u8 bStart);
++extern void Hal_SetBandwidth(PADAPTER pAdapter);
++
++extern void Hal_SetDataRate(PADAPTER pAdapter);
++extern void Hal_SetChannel(PADAPTER pAdapter);
++extern void Hal_SetAntennaPathPower(PADAPTER pAdapter);
++extern s32 Hal_SetThermalMeter(PADAPTER pAdapter, u8 target_ther);
++extern s32 Hal_SetPowerTracking(PADAPTER padapter, u8 enable);
++extern void Hal_GetPowerTracking(PADAPTER padapter, u8 * enable);
++extern void Hal_GetThermalMeter(PADAPTER pAdapter, u8 *value);
++extern void Hal_mpt_SwitchRfSetting(PADAPTER pAdapter);
++extern void Hal_MPT_CCKTxPowerAdjust(PADAPTER Adapter, BOOLEAN bInCH14);
++extern void Hal_MPT_CCKTxPowerAdjustbyIndex(PADAPTER pAdapter, BOOLEAN beven);
++extern void Hal_SetCCKTxPower(PADAPTER pAdapter, u8 * TxPower);
++extern void Hal_SetOFDMTxPower(PADAPTER pAdapter, u8 * TxPower);
++extern void Hal_TriggerRFThermalMeter(PADAPTER pAdapter);
++extern u8 Hal_ReadRFThermalMeter(PADAPTER pAdapter);
++extern void Hal_SetCCKContinuousTx(PADAPTER pAdapter, u8 bStart);
++extern void Hal_SetOFDMContinuousTx(PADAPTER pAdapter, u8 bStart);
++
++
++#endif //end CONFIG_MP_INCLUDED
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192d_led.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192d_led.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192d_led.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192d_led.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,43 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __RTL8192D_LED_H_
++#define __RTL8192D_LED_H_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++
++
++//================================================================================
++// Interface to manipulate LED objects.
++//================================================================================
++#ifdef CONFIG_USB_HCI
++void rtl8192du_InitSwLeds(_adapter *padapter);
++void rtl8192du_DeInitSwLeds(_adapter *padapter);
++#endif
++
++#ifdef CONFIG_PCI_HCI
++void rtl8192de_gen_RefreshLedState(PADAPTER Adapter);
++void rtl8192de_InitSwLeds(_adapter *padapter);
++void rtl8192de_DeInitSwLeds(_adapter *padapter);
++#endif
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192d_recv.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192d_recv.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192d_recv.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192d_recv.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,187 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef _RTL8192D_RECV_H_
++#define _RTL8192D_RECV_H_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++
++
++#ifdef PLATFORM_OS_XP
++	#ifdef CONFIG_SDIO_HCI
++		#define NR_RECVBUFF 1024//512//128
++	#else
++		#define NR_RECVBUFF (16)
++	#endif
++#elif defined(PLATFORM_OS_CE)
++	#ifdef CONFIG_SDIO_HCI
++		#define NR_RECVBUFF (128)
++	#else
++		#define NR_RECVBUFF (4)
++	#endif
++#else
++#ifdef CONFIG_SINGLE_RECV_BUF
++	#define NR_RECVBUFF (1)
++#else
++	#define NR_RECVBUFF (4)
++#endif //CONFIG_SINGLE_RECV_BUF
++	#define NR_PREALLOC_RECV_SKB (8)
++#endif
++
++
++
++#define RECV_BLK_SZ 512
++#define RECV_BLK_CNT 16
++#define RECV_BLK_TH RECV_BLK_CNT
++
++#if defined(CONFIG_USB_HCI)
++
++#ifdef PLATFORM_OS_CE
++#define MAX_RECVBUF_SZ (8192+1024) // 8K+1k
++#else
++	#ifndef CONFIG_MINIMAL_MEMORY_USAGE
++		//#define MAX_RECVBUF_SZ (32768) // 32k
++		//#define MAX_RECVBUF_SZ (16384) //16K
++		//#define MAX_RECVBUF_SZ (10240) //10K
++		#ifdef CONFIG_PLATFORM_MSTAR
++			#define MAX_RECVBUF_SZ (8192) // 8K
++		#else
++			#define MAX_RECVBUF_SZ (15360) // 15k < 16k
++		#endif
++	#else
++		#define MAX_RECVBUF_SZ (4000) // about 4K
++	#endif
++#endif
++
++#elif defined(CONFIG_PCI_HCI)
++//#ifndef CONFIG_MINIMAL_MEMORY_USAGE
++//	#define MAX_RECVBUF_SZ (9100)
++//#else
++	#define MAX_RECVBUF_SZ (4000) // about 4K
++//#endif
++
++#define RX_MPDU_QUEUE				0
++#define RX_CMD_QUEUE				1
++#define RX_MAX_QUEUE				2
++#endif
++
++#define RECV_BULK_IN_ADDR		0x80
++#define RECV_INT_IN_ADDR		0x81
++
++#define PHY_RSSI_SLID_WIN_MAX				100
++#define PHY_LINKQUALITY_SLID_WIN_MAX		20
++
++struct phy_stat
++{
++	unsigned int phydw0;
++
++	unsigned int phydw1;
++
++	unsigned int phydw2;
++
++	unsigned int phydw3;
++
++	unsigned int phydw4;
++
++	unsigned int phydw5;
++
++	unsigned int phydw6;
++
++	unsigned int phydw7;
++};
++
++typedef struct _Phy_OFDM_Rx_Status_Report_8192cd
++{
++	unsigned char	trsw_gain_X[4];
++	unsigned char	pwdb_all;
++	unsigned char	cfosho_X[4];
++	unsigned char	cfotail_X[4];
++	unsigned char	rxevm_X[2];
++	unsigned char	rxsnr_X[4];
++	unsigned char	pdsnr_X[2];
++	unsigned char	csi_current_X[2];
++	unsigned char	csi_target_X[2];
++	unsigned char	sigevm;
++	unsigned char	max_ex_pwr;
++//#ifdef RTL8192SE
++#ifdef CONFIG_LITTLE_ENDIAN
++	unsigned char ex_intf_flg:1;
++	unsigned char sgi_en:1;
++	unsigned char rxsc:2;
++	//unsigned char rsvd:4;
++	unsigned char idle_long:1;
++	unsigned char r_ant_train_en:1;
++	unsigned char ANTSELB:1;
++	unsigned char ANTSEL:1;	
++#else	// _BIG_ENDIAN_
++	//unsigned char rsvd:4;
++	unsigned char ANTSEL:1;	
++	unsigned char ANTSELB:1;
++	unsigned char r_ant_train_en:1;
++	unsigned char idle_long:1;
++	unsigned char rxsc:2;
++	unsigned char sgi_en:1;
++	unsigned char ex_intf_flg:1;
++#endif
++//#else	// RTL8190, RTL8192E
++//	unsigned char	sgi_en;
++//	unsigned char	rxsc_sgien_exflg;
++//#endif
++}__attribute__ ((packed)) PHY_STS_OFDM_8192CD_T,PHY_RX_DRIVER_INFO_8192CD;
++
++typedef struct _Phy_CCK_Rx_Status_Report_8192cd
++{
++	/* For CCK rate descriptor. This is a signed 8:1 variable. LSB bit presend
++		0.5. And MSB 7 bts presend a signed value. Range from -64~+63.5. */
++	u8	adc_pwdb_X[4];
++	u8	SQ_rpt;
++	u8	cck_agc_rpt;
++} PHY_STS_CCK_8192CD_T;
++
++// Rx smooth factor
++#define	Rx_Smooth_Factor (20)
++
++#ifdef CONFIG_USB_HCI
++typedef struct _INTERRUPT_MSG_FORMAT_EX{
++	unsigned int C2H_MSG0;
++	unsigned int C2H_MSG1;
++	unsigned int C2H_MSG2;
++	unsigned int C2H_MSG3;
++	unsigned int HISR; // from HISR Reg0x124, read to clear
++	unsigned int HISRE;// from HISRE Reg0x12c, read to clear
++	unsigned int  MSG_EX;
++}INTERRUPT_MSG_FORMAT_EX,*PINTERRUPT_MSG_FORMAT_EX;
++
++void rtl8192du_init_recvbuf(_adapter *padapter, struct recv_buf *precvbuf);
++int	rtl8192du_init_recv_priv(_adapter * padapter);
++void	rtl8192du_free_recv_priv(_adapter * padapter);
++#endif
++
++#ifdef CONFIG_PCI_HCI
++int	rtl8192de_init_recv_priv(_adapter * padapter);
++void rtl8192de_free_recv_priv(_adapter * padapter);
++#endif
++
++void rtl8192d_translate_rx_signal_stuff(union recv_frame *precvframe, struct phy_stat *pphy_info);
++void rtl8192d_query_rx_desc_status(union recv_frame *precvframe, struct recv_stat *pdesc);
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192d_rf.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192d_rf.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192d_rf.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192d_rf.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,97 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++/******************************************************************************
++ * 
++ * 
++ * Module:	rtl8192d_rf.h	( Header File)
++ * 
++ * Note:	Collect every HAL RF type exter API or constant.	 
++ *
++ * Function:	
++ * 		 
++ * Export:	
++ * 
++ * Abbrev:	
++ * 
++ * History:
++ * Data			Who		Remark
++ * 
++ * 09/25/2008	MHC		Create initial version.
++ * 
++ * 
++******************************************************************************/
++#ifndef _RTL8192D_RF_H_
++#define _RTL8192D_RF_H_
++/* Check to see if the file has been included already.  */
++
++
++/*--------------------------Define Parameters-------------------------------*/
++
++//
++// For RF 6052 Series
++//
++#define		RF6052_MAX_TX_PWR			0x3F
++#define		RF6052_MAX_REG				0x3F
++#define		RF6052_MAX_PATH				2
++/*--------------------------Define Parameters-------------------------------*/
++
++
++/*------------------------------Define structure----------------------------*/ 
++
++/*------------------------------Define structure----------------------------*/ 
++
++
++/*------------------------Export global variable----------------------------*/
++/*------------------------Export global variable----------------------------*/
++
++/*------------------------Export Marco Definition---------------------------*/
++
++/*------------------------Export Marco Definition---------------------------*/
++
++
++/*--------------------------Exported Function prototype---------------------*/
++
++//
++// RF RL6052 Series API
++//
++void		rtl8192d_RF_ChangeTxPath(	IN	PADAPTER	Adapter, 
++										IN	u16		DataRate);
++void		rtl8192d_PHY_RF6052SetBandwidth(	
++										IN	PADAPTER				Adapter,
++										IN	HT_CHANNEL_WIDTH		Bandwidth);	
++VOID	rtl8192d_PHY_RF6052SetCckTxPower(
++										IN	PADAPTER	Adapter,
++										IN	u8*		pPowerlevel);
++VOID	rtl8192d_PHY_RF6052SetOFDMTxPower(
++										IN	PADAPTER	Adapter,
++										IN	u8*		pPowerLevel,
++										IN	u8		Channel);
++int	PHY_RF6052_Config8192D(	IN	PADAPTER		Adapter	);
++
++BOOLEAN	rtl8192d_PHY_EnableAnotherPHY(IN	PADAPTER Adapter, IN	BOOLEAN	 bMac0);
++
++void	rtl8192d_PHY_PowerDownAnotherPHY(IN PADAPTER Adapter, IN BOOLEAN bMac0);
++
++
++/*--------------------------Exported Function prototype---------------------*/
++
++
++#endif/* End of HalRf.h */
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192d_spec.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192d_spec.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192d_spec.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192d_spec.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,1841 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++
++#ifndef __RTL8192D_SPEC_H__
++#define __RTL8192D_SPEC_H__
++
++#include <drv_conf.h>
++
++#ifndef BIT
++#define BIT(x)		(1 << (x))
++#endif
++
++#define BIT0		0x00000001
++#define BIT1		0x00000002
++#define BIT2		0x00000004
++#define BIT3		0x00000008
++#define BIT4		0x00000010
++#define BIT5		0x00000020
++#define BIT6		0x00000040
++#define BIT7		0x00000080
++#define BIT8		0x00000100
++#define BIT9		0x00000200
++#define BIT10	0x00000400
++#define BIT11	0x00000800
++#define BIT12	0x00001000
++#define BIT13	0x00002000
++#define BIT14	0x00004000
++#define BIT15	0x00008000
++#define BIT16	0x00010000
++#define BIT17	0x00020000
++#define BIT18	0x00040000
++#define BIT19	0x00080000
++#define BIT20	0x00100000
++#define BIT21	0x00200000
++#define BIT22	0x00400000
++#define BIT23	0x00800000
++#define BIT24	0x01000000
++#define BIT25	0x02000000
++#define BIT26	0x04000000
++#define BIT27	0x08000000
++#define BIT28	0x10000000
++#define BIT29	0x20000000
++#define BIT30	0x40000000
++#define BIT31	0x80000000
++
++
++//============================================================
++//       8192D Regsiter offset definition
++//============================================================
++
++
++//============================================================
++//
++//============================================================
++
++//-----------------------------------------------------
++//
++//	0x0000h ~ 0x00FFh	System Configuration
++//
++//-----------------------------------------------------
++#define REG_SYS_ISO_CTRL			0x0000
++#define REG_SYS_FUNC_EN			0x0002
++#define REG_APS_FSMCO				0x0004
++#define REG_SYS_CLKR				0x0008
++#define REG_9346CR					0x000A
++#define REG_EE_VPD					0x000C
++#define REG_AFE_MISC				0x0010
++#define REG_SPS0_CTRL				0x0011
++#define REG_POWER_OFF_IN_PROCESS 0x0017
++#define REG_SPS_OCP_CFG			0x0018
++#define REG_RSV_CTRL				0x001C
++#define REG_RF_CTRL					0x001F
++#define REG_LDOA15_CTRL			0x0020
++#define REG_LDOV12D_CTRL			0x0021
++#define REG_LDOHCI12_CTRL			0x0022
++#define REG_LPLDO_CTRL				0x0023
++#define REG_AFE_XTAL_CTRL			0x0024
++#define REG_AFE_PLL_CTRL			0x0028
++#define REG_MAC_PHY_CTRL			0x002c //for 92d, DMDP,SMSP,DMSP contrl
++#define REG_EFUSE_CTRL				0x0030
++#define REG_EFUSE_TEST				0x0034
++#define REG_PWR_DATA				0x0038
++#define REG_CAL_TIMER				0x003C
++#define REG_ACLK_MON				0x003E
++#define REG_GPIO_MUXCFG			0x0040
++//#define REG_GPIO_MUXCFG				0x0041
++#define REG_GPIO_IO_SEL				0x0042
++#define REG_MAC_PINMUX_CFG		0x0043
++#define REG_GPIO_PIN_CTRL			0x0044
++#define REG_GPIO_INTM				0x0048
++#define REG_LEDCFG0					0x004C
++#define REG_LEDCFG1					0x004D
++#define REG_LEDCFG2					0x004E
++#define REG_LEDCFG3					0x004F
++#define REG_FSIMR					0x0050
++#define REG_FSISR					0x0054
++
++#define REG_MCUFWDL				0x0080
++#ifdef CONFIG_WOWLAN
++#define REG_WOWLAN_REASON			0x00FC
++#endif // CONFIG_WOWLAN
++#define REG_HMEBOX_EXT_0			0x0088
++#define REG_HMEBOX_EXT_1			0x008A
++#define REG_HMEBOX_EXT_2			0x008C
++#define REG_HMEBOX_EXT_3			0x008E
++
++#define REG_BIST_SCAN				0x00D0
++#define REG_BIST_RPT				0x00D4
++#define REG_BIST_ROM_RPT			0x00D8
++#define REG_USB_SIE_INTF			0x00E0
++#define REG_PCIE_MIO_INTF			0x00E4
++#define REG_PCIE_MIO_INTD			0x00E8
++#define REG_HPON_FSM				0x00EC
++#define REG_SYS_CFG					0x00F0
++#define REG_MAC_PHY_CTRL_NORMAL	0x00f8
++
++#define  REG_MAC0                                	0x0081
++#define  REG_MAC1                                	0x0053
++#define  FW_MAC0_ready                      	0x18
++#define  FW_MAC1_ready                      	0x1A
++#define  MAC0_ON                                  	BIT7
++#define  MAC1_ON                                  	BIT0
++#define  mac0_ready                             	BIT0
++#define  mac1_ready                             	BIT0
++
++
++//-----------------------------------------------------
++//
++//	0x0100h ~ 0x01FFh	MACTOP General Configuration
++//
++//-----------------------------------------------------
++#define REG_CR						0x0100
++#define REG_PBP						0x0104
++#define REG_TRXDMA_CTRL			0x010C
++#define REG_TRXFF_BNDY				0x0114
++#define REG_TRXFF_STATUS			0x0118
++#define REG_RXFF_PTR				0x011C
++#define REG_HIMR					0x0120
++#define REG_HISR					0x0124
++#define REG_HIMRE					0x0128
++#define REG_HISRE					0x012C
++#define REG_CPWM					0x012F
++#define REG_FWIMR					0x0130
++#define REG_FWISR					0x0134
++#define REG_FTIMR					0x0138
++#define REG_PKTBUF_DBG_CTRL		0x0140
++#define REG_PKTBUF_DBG_DATA_L		0x0144
++#define REG_PKTBUF_DBG_DATA_H	0x0148
++
++#define REG_TC0_CTRL				0x0150
++#define REG_TC1_CTRL				0x0154
++#define REG_TC2_CTRL				0x0158
++#define REG_TC3_CTRL				0x015C
++#define REG_TC4_CTRL				0x0160
++#define REG_TCUNIT_BASE			0x0164
++#define REG_MBIST_START			0x0174
++#define REG_MBIST_DONE				0x0178
++#define REG_MBIST_FAIL				0x017C
++#define REG_C2HEVT_MSG_NORMAL	0x01A0
++#define REG_C2HEVT_CLEAR			0x01AF
++#define REG_C2HEVT_MSG_TEST		0x01B8
++#define REG_MCUTST_1				0x01c0
++#define REG_FMETHR					0x01C8
++#define REG_HMETFR					0x01CC
++#define REG_HMEBOX_0				0x01D0
++#define REG_HMEBOX_1				0x01D4
++#define REG_HMEBOX_2				0x01D8
++#define REG_HMEBOX_3				0x01DC
++
++#define REG_LLT_INIT				0x01E0
++#define REG_BB_ACCEESS_CTRL		0x01E8
++#define REG_BB_ACCESS_DATA		0x01EC
++
++
++//-----------------------------------------------------
++//
++//	0x0200h ~ 0x027Fh	TXDMA Configuration
++//
++//-----------------------------------------------------
++#define REG_RQPN					0x0200
++#define REG_FIFOPAGE				0x0204
++#define REG_TDECTRL					0x0208
++#define REG_TXDMA_OFFSET_CHK		0x020C
++#define REG_TXDMA_STATUS			0x0210
++#define REG_RQPN_NPQ				0x0214
++
++//-----------------------------------------------------
++//
++//	0x0280h ~ 0x02FFh	RXDMA Configuration
++//
++//-----------------------------------------------------
++#define REG_RXDMA_AGG_PG_TH		0x0280
++#define REG_RXPKT_NUM				0x0284
++#define REG_RXDMA_STATUS			0x0288
++
++
++//-----------------------------------------------------
++//
++//	0x0300h ~ 0x03FFh	PCIe
++//
++//-----------------------------------------------------
++#define	REG_PCIE_CTRL_REG			0x0300
++#define	REG_INT_MIG				0x0304	// Interrupt Migration 
++#define	REG_BCNQ_DESA				0x0308	// TX Beacon Descriptor Address
++#define	REG_HQ_DESA				0x0310	// TX High Queue Descriptor Address
++#define	REG_MGQ_DESA				0x0318	// TX Manage Queue Descriptor Address
++#define	REG_VOQ_DESA				0x0320	// TX VO Queue Descriptor Address
++#define	REG_VIQ_DESA				0x0328	// TX VI Queue Descriptor Address
++#define	REG_BEQ_DESA				0x0330	// TX BE Queue Descriptor Address
++#define	REG_BKQ_DESA				0x0338	// TX BK Queue Descriptor Address
++#define	REG_RX_DESA				0x0340	// RX Queue	Descriptor Address
++#define	REG_DBI					0x0348	// Backdoor REG for Access Configuration
++//sherry added for DBI Read/Write  20091126
++#define	REG_DBI_WDATA				0x0348	// Backdoor REG for Access Configuration
++#define  	REG_DBI_RDATA				0x034C //Backdoor REG for Access Configuration
++#define	REG_DBI_CTRL				0x0350  //Backdoor REG for Access Configuration
++#define	REG_DBI_FLAG				0x0352 //Backdoor REG for Access Configuration#define	REG_MDIO					0x0354	// MDIO for Access PCIE PHY
++#define	REG_MDIO					0x0354	// MDIO for Access PCIE PHY
++#define	REG_DBG_SEL				0x0360	// Debug Selection Register
++#define	REG_PCIE_HRPWM			0x0361	//PCIe RPWM
++#define	REG_PCIE_HCPWM			0x0363	//PCIe CPWM
++#define	REG_UART_CTRL				0x0364	// UART	Control
++#define	REG_UART_TX_DESA			0x0370	// UART TX Descriptor Address
++#define	REG_UART_RX_DESA			0x0378	// UART Rx Descriptor Address
++
++
++// spec version 11
++//-----------------------------------------------------
++//
++//	0x0400h ~ 0x047Fh	Protocol Configuration
++//
++//-----------------------------------------------------
++#define REG_VOQ_INFORMATION			0x0400
++#define REG_VIQ_INFORMATION			0x0404
++#define REG_BEQ_INFORMATION			0x0408
++#define REG_BKQ_INFORMATION			0x040C
++#define REG_MGQ_INFORMATION			0x0410
++#define REG_HGQ_INFORMATION			0x0414
++#define REG_BCNQ_INFORMATION			0x0418
++
++
++#define REG_CPU_MGQ_INFORMATION		0x041C
++#define REG_FWHW_TXQ_CTRL				0x0420
++#define REG_HWSEQ_CTRL					0x0423
++#define REG_TXPKTBUF_BCNQ_BDNY		0x0424
++#define REG_TXPKTBUF_MGQ_BDNY		0x0425
++#define REG_LIFETIME_EN				0x0426
++#define REG_MULTI_BCNQ_OFFSET			0x0427
++#define REG_SPEC_SIFS					0x0428
++#define REG_RL							0x042A
++#define REG_DARFRC						0x0430
++#define REG_RARFRC						0x0438
++#define REG_RRSR						0x0440
++#define REG_ARFR0						0x0444
++#define REG_ARFR1						0x0448
++#define REG_ARFR2						0x044C
++#define REG_ARFR3						0x0450
++#define REG_AGGLEN_LMT					0x0458
++#define REG_AMPDU_MIN_SPACE			0x045C
++#define REG_TXPKTBUF_WMAC_LBK_BF_HD	0x045D
++#define REG_FAST_EDCA_CTRL				0x0460
++#define REG_RD_RESP_PKT_TH				0x0463
++#define REG_INIRTS_RATE_SEL			0x0480
++#define REG_INIDATA_RATE_SEL			0x0484
++
++//#define REG_FW_TSF_SYNC_CNT				0x04A0
++#define REG_FW_RESET_TSF_CNT_1				0x05FC
++#define REG_FW_RESET_TSF_CNT_0				0x05FD
++#define REG_FW_BCN_DIS_CNT				0x05FE
++
++#define REG_POWER_STATUS				0x04A4
++#define REG_POWER_STAGE1				0x04B4
++#define REG_POWER_STAGE2				0x04B8
++#define REG_PKT_VO_VI_LIFE_TIME			0x04C0
++#define REG_PKT_BE_BK_LIFE_TIME			0x04C2
++#define REG_STBC_SETTING				0x04C4
++#define REG_PROT_MODE_CTRL			0x04C8
++#define REG_MAX_AGGR_NUM				0x04CA
++#define REG_RTS_MAX_AGGR_NUM			0x04CB
++#define REG_BAR_MODE_CTRL				0x04CC
++#define REG_RA_TRY_RATE_AGG_LMT		0x04CF
++#define REG_EARLY_MODE_CONTROL		0x04D0
++#define REG_NQOS_SEQ					0x04DC
++#define REG_QOS_SEQ					0x04DE
++#define REG_NEED_CPU_HANDLE			0x04E0
++#define REG_PKT_LOSE_RPT				0x04E1
++#define REG_PTCL_ERR_STATUS			0x04E2
++#define REG_DUMMY						0x04FC
++
++
++
++//-----------------------------------------------------
++//
++//	0x0500h ~ 0x05FFh	EDCA Configuration
++//
++//-----------------------------------------------------
++#define REG_EDCA_VO_PARAM			0x0500
++#define REG_EDCA_VI_PARAM			0x0504
++#define REG_EDCA_BE_PARAM			0x0508
++#define REG_EDCA_BK_PARAM			0x050C
++#define REG_BCNTCFG					0x0510
++#define REG_PIFS						0x0512
++#define REG_RDG_PIFS				0x0513
++#define REG_SIFS_CTX				0x0514
++#define REG_SIFS_TRX				0x0516
++#define REG_TSFTR_SYN_OFFSET		0x0518
++#define REG_AGGR_BREAK_TIME		0x051A
++#define REG_SLOT					0x051B
++#define REG_TX_PTCL_CTRL			0x0520
++#define REG_TXPAUSE					0x0522
++#define REG_DIS_TXREQ_CLR			0x0523
++#define REG_RD_CTRL					0x0524
++#define REG_TBTT_PROHIBIT			0x0540
++#define REG_RD_NAV_NXT				0x0544
++#define REG_NAV_PROT_LEN			0x0546
++#define REG_BCN_CTRL				0x0550
++#define REG_BCN_CTRL_1				0x0551
++#define REG_MBID_NUM				0x0552
++#define REG_DUAL_TSF_RST			0x0553
++#define REG_BCN_INTERVAL			0x0554	// The same as REG_MBSSID_BCN_SPACE
++#define REG_MBSSID_BCN_SPACE		0x0554
++#define REG_DRVERLYINT				0x0558
++#define REG_BCNDMATIM				0x0559
++#define REG_ATIMWND				0x055A
++#define REG_USTIME_TSF				0x055C
++#define REG_BCN_MAX_ERR			0x055D
++#define REG_RXTSF_OFFSET_CCK		0x055E
++#define REG_RXTSF_OFFSET_OFDM		0x055F	
++#define REG_TSFTR					0x0560
++#define REG_TSFTR1					0x0568
++#define REG_INIT_TSFTR				0x0564
++#define REG_ATIMWND_1				0x0570
++#define REG_PSTIMER					0x0580
++#define REG_TIMER0					0x0584
++#define REG_TIMER1					0x0588
++#define REG_ACMHWCTRL				0x05C0
++#define REG_ACMRSTCTRL				0x05C1
++#define REG_ACMAVG					0x05C2
++#define REG_VO_ADMTIME				0x05C4
++#define REG_VI_ADMTIME				0x05C6
++#define REG_BE_ADMTIME				0x05C8
++#define REG_EDCA_RANDOM_GEN		0x05CC
++#define REG_SCH_TXCMD				0x05D0
++
++#define REG_DMC						0x05F0	//Dual MAC Co-Existence Register
++
++
++//-----------------------------------------------------
++//
++//	0x0600h ~ 0x07FFh	WMAC Configuration
++//
++//-----------------------------------------------------
++#define REG_APSD_CTRL				0x0600
++#define REG_BWOPMODE				0x0603
++#define REG_TCR						0x0604
++#define REG_RCR						0x0608
++#define REG_RX_PKT_LIMIT			0x060C
++#define REG_RX_DLK_TIME			0x060D
++#define REG_RX_DRVINFO_SZ			0x060F
++
++#define REG_MACID					0x0610
++#define REG_BSSID					0x0618
++#define REG_MAR						0x0620
++#define REG_MBIDCAMCFG				0x0628
++
++#define REG_USTIME_EDCA			0x0638
++#define REG_MAC_SPEC_SIFS			0x063A
++#define REG_RESP_SIFS_CCK			0x063C
++#define REG_RESP_SIFS_OFDM			0x063E
++#define REG_ACKTO					0x0640
++#define REG_CTS2TO					0x0641
++#define REG_EIFS						0x0642
++
++
++//WMA, BA, CCX
++#define REG_NAV_CTRL				0x0650
++#define REG_BACAMCMD				0x0654
++#define REG_BACAMCONTENT			0x0658
++#define REG_LBDLY					0x0660
++#define REG_FWDLY					0x0661
++#define REG_RXERR_RPT				0x0664
++#define REG_WMAC_TRXPTCL_CTL		0x0668
++
++
++// Security
++#define REG_CAMCMD					0x0670
++#define REG_CAMWRITE				0x0674
++#define REG_CAMREAD				0x0678
++#define REG_CAMDBG					0x067C
++#define REG_SECCFG					0x0680
++
++// Power
++#define REG_WOW_CTRL				0x0690
++#define REG_PSSTATUS				0x0691
++#define REG_PS_RX_INFO				0x0692
++#define REG_LPNAV_CTRL				0x0694
++#define REG_WKFMCAM_CMD			0x0698
++#define REG_WKFMCAM_RWD			0x069C
++#define REG_RXFLTMAP0				0x06A0
++#define REG_RXFLTMAP1				0x06A2
++#define REG_RXFLTMAP2				0x06A4
++#define REG_BCN_PSR_RPT			0x06A8
++#define REG_CALB32K_CTRL			0x06AC
++#define REG_PKT_MON_CTRL			0x06B4
++#define REG_BT_COEX_TABLE			0x06C0
++#define REG_WMAC_RESP_TXINFO		0x06D8
++
++#define REG_MACID1					0x0700
++#define REG_BSSID1					0x0708
++
++//-----------------------------------------------------
++//
++//	0xFE00h ~ 0xFE55h	USB Configuration
++//
++//-----------------------------------------------------
++#define REG_USB_INFO				0xFE17
++#define REG_USB_SPECIAL_OPTION	0xFE55
++#define REG_USB_DMA_AGG_TO		0xFE5B
++#define REG_USB_AGG_TO				0xFE5C
++#define REG_USB_AGG_TH				0xFE5D
++
++// for 92DU high_Queue low_Queue Normal_Queue select 
++#define REG_USB_High_NORMAL_Queue_Select_MAC0  0xFE44
++//#define REG_USB_LOW_Queue_Select_MAC0       0xFE45
++#define REG_USB_High_NORMAL_Queue_Select_MAC1  0xFE47
++//#define REG_USB_LOW_Queue_Select_MAC1       0xFE48
++
++// For test chip
++#define REG_TEST_USB_TXQS			0xFE48
++#define REG_TEST_SIE_VID			0xFE60		// 0xFE60~0xFE61
++#define REG_TEST_SIE_PID			0xFE62		// 0xFE62~0xFE63
++#define REG_TEST_SIE_OPTIONAL		0xFE64
++#define REG_TEST_SIE_CHIRP_K		0xFE65
++#define REG_TEST_SIE_PHY			0xFE66		// 0xFE66~0xFE6B
++#define REG_TEST_SIE_MAC_ADDR		0xFE70		// 0xFE70~0xFE75
++#define REG_TEST_SIE_STRING		0xFE80		// 0xFE80~0xFEB9
++
++
++// For normal chip
++#define REG_NORMAL_SIE_VID			0xFE60		// 0xFE60~0xFE61
++#define REG_NORMAL_SIE_PID			0xFE62		// 0xFE62~0xFE63
++#define REG_NORMAL_SIE_OPTIONAL	0xFE64
++#define REG_NORMAL_SIE_EP			0xFE65		// 0xFE65~0xFE67
++#define REG_NORMAL_SIE_PHY		0xFE68		// 0xFE68~0xFE6B
++#define REG_NORMAL_SIE_MAC_ADDR	0xFE70		// 0xFE70~0xFE75
++#define REG_NORMAL_SIE_STRING		0xFE80		// 0xFE80~0xFEDF
++
++
++//-----------------------------------------------------
++//
++//	Redifine 8192C register definition for compatibility
++//
++//-----------------------------------------------------
++
++// TODO: use these definition when using REG_xxx naming rule.
++// NOTE: DO NOT Remove these definition. Use later.
++
++#define	SYS_ISO_CTRL				REG_SYS_ISO_CTRL	// System Isolation Interface Control.
++#define	SYS_FUNC_EN				REG_SYS_FUNC_EN		// System Function Enable.
++#define	SYS_CLK						REG_SYS_CLKR
++#define	CR9346						REG_9346CR			// 93C46/93C56 Command Register.
++#define	EFUSE_CTRL					REG_EFUSE_CTRL		// E-Fuse Control.
++#define	EFUSE_TEST					REG_EFUSE_TEST		// E-Fuse Test.
++#define	MSR							(REG_CR + 2)		// Media Status register
++#define	ISR							REG_HISR
++#define	TSFR						REG_TSFTR			// Timing Sync Function Timer Register.
++
++#define	MACIDR0					REG_MACID			// MAC ID Register, Offset 0x0050-0x0053
++#define	MACIDR4					(REG_MACID + 4)		// MAC ID Register, Offset 0x0054-0x0055
++
++#define 	PBP							REG_PBP
++
++// Redifine MACID register, to compatible prior ICs.
++#define	IDR0						MACIDR0
++#define	IDR4						MACIDR4
++
++
++//
++// 9. Security Control Registers	(Offset: )
++//
++#define	RWCAM						REG_CAMCMD		//IN 8190 Data Sheet is called CAMcmd
++#define	WCAMI						REG_CAMWRITE	// Software write CAM input content
++#define	RCAMO						REG_CAMREAD		// Software read/write CAM config
++#define	CAMDBG						REG_CAMDBG
++#define	SECR						REG_SECCFG		//Security Configuration Register
++
++// Unused register
++#define	UnusedRegister				0x1BF
++#define	DCAM						UnusedRegister
++#define	PSR							UnusedRegister
++#define 	BBAddr						UnusedRegister
++#define	PhyDataR					UnusedRegister
++
++#define	InvalidBBRFValue			0x12345678
++
++// Min Spacing related settings.
++#define	MAX_MSS_DENSITY_2T 			0x13
++#define	MAX_MSS_DENSITY_1T 			0x0A
++
++//----------------------------------------------------------------------------
++//       8192C Cmd9346CR bits					(Offset 0xA, 16bit)
++//----------------------------------------------------------------------------
++#define	CmdEEPROM_En				BIT5	 // EEPROM enable when set 1
++#define	CmdEERPOMSEL				BIT4 	// System EEPROM select, 0: boot from E-FUSE, 1: The EEPROM used is 9346
++#define	Cmd9346CR_9356SEL			BIT4
++#define	AutoLoadEEPROM			(CmdEEPROM_En|CmdEERPOMSEL)
++#define	AutoLoadEFUSE				CmdEEPROM_En
++
++//       8192C GPIO MUX Configuration Register (offset 0x40, 4 byte)
++//----------------------------------------------------------------------------
++#define	GPIOSEL_GPIO				0
++#define	GPIOSEL_ENBT				BIT5
++
++//----------------------------------------------------------------------------
++//       8192C GPIO PIN Control Register (offset 0x44, 4 byte)
++//----------------------------------------------------------------------------
++#define	GPIO_IN						REG_GPIO_PIN_CTRL		// GPIO pins input value
++#define	GPIO_OUT					(REG_GPIO_PIN_CTRL+1)	// GPIO pins output value
++#define	GPIO_IO_SEL				(REG_GPIO_PIN_CTRL+2)	// GPIO pins output enable when a bit is set to "1"; otherwise, input is configured.
++#define	GPIO_MOD					(REG_GPIO_PIN_CTRL+3)
++
++
++//----------------------------------------------------------------------------
++//       8192C (MSR) Media Status Register	(Offset 0x4C, 8 bits)  
++//----------------------------------------------------------------------------
++/*
++Network Type
++00: No link
++01: Link in ad hoc network
++10: Link in infrastructure network
++11: AP mode
++Default: 00b.
++*/
++#define	MSR_NOLINK					0x00
++#define	MSR_ADHOC					0x01
++#define	MSR_INFRA					0x02
++#define	MSR_AP						0x03
++
++//
++// 6. Adaptive Control Registers  (Offset: 0x0160 - 0x01CF)
++//
++//----------------------------------------------------------------------------
++//       8192C Response Rate Set Register	(offset 0x181, 24bits)
++//----------------------------------------------------------------------------
++#define	RRSR_RSC_OFFSET			21
++#define	RRSR_SHORT_OFFSET			23
++#define	RRSR_RSC_BW_40M			0x600000
++#define	RRSR_RSC_UPSUBCHNL		0x400000
++#define	RRSR_RSC_LOWSUBCHNL		0x200000
++#define	RRSR_SHORT					0x800000
++#define	RRSR_1M					BIT0
++#define	RRSR_2M					BIT1 
++#define	RRSR_5_5M					BIT2 
++#define	RRSR_11M					BIT3 
++#define	RRSR_6M					BIT4 
++#define	RRSR_9M					BIT5 
++#define	RRSR_12M					BIT6 
++#define	RRSR_18M					BIT7 
++#define	RRSR_24M					BIT8 
++#define	RRSR_36M					BIT9 
++#define	RRSR_48M					BIT10 
++#define	RRSR_54M					BIT11
++#define	RRSR_MCS0					BIT12
++#define	RRSR_MCS1					BIT13
++#define	RRSR_MCS2					BIT14
++#define	RRSR_MCS3					BIT15
++#define	RRSR_MCS4					BIT16
++#define	RRSR_MCS5					BIT17
++#define	RRSR_MCS6					BIT18
++#define	RRSR_MCS7					BIT19
++#define	BRSR_AckShortPmb			BIT23	
++// CCK ACK: use Short Preamble or not
++
++
++//----------------------------------------------------------------------------
++//       8192C Rate Definition
++//----------------------------------------------------------------------------
++//CCK
++#define	RATR_1M					0x00000001
++#define	RATR_2M					0x00000002
++#define	RATR_55M					0x00000004
++#define	RATR_11M					0x00000008
++//OFDM 		
++#define	RATR_6M					0x00000010
++#define	RATR_9M					0x00000020
++#define	RATR_12M					0x00000040
++#define	RATR_18M					0x00000080
++#define	RATR_24M					0x00000100
++#define	RATR_36M					0x00000200
++#define	RATR_48M					0x00000400
++#define	RATR_54M					0x00000800
++//MCS 1 Spatial Stream	
++#define	RATR_MCS0					0x00001000
++#define	RATR_MCS1					0x00002000
++#define	RATR_MCS2					0x00004000
++#define	RATR_MCS3					0x00008000
++#define	RATR_MCS4					0x00010000
++#define	RATR_MCS5					0x00020000
++#define	RATR_MCS6					0x00040000
++#define	RATR_MCS7					0x00080000
++//MCS 2 Spatial Stream
++#define	RATR_MCS8					0x00100000
++#define	RATR_MCS9					0x00200000
++#define	RATR_MCS10					0x00400000
++#define	RATR_MCS11					0x00800000
++#define	RATR_MCS12					0x01000000
++#define	RATR_MCS13					0x02000000
++#define	RATR_MCS14					0x04000000
++#define	RATR_MCS15					0x08000000
++
++//----------------------------------------------------------------------------
++//       8192C BW_OPMODE bits					(Offset 0x203, 8bit)
++//----------------------------------------------------------------------------
++#define	BW_OPMODE_20MHZ			BIT2
++#define	BW_OPMODE_5G				BIT1
++#define	BW_OPMODE_11J				BIT0
++
++
++//----------------------------------------------------------------------------
++//       8192C CAM Config Setting (offset 0x250, 1 byte)
++//----------------------------------------------------------------------------
++#define	CAM_VALID					BIT15
++#define	CAM_NOTVALID				0x0000
++#define	CAM_USEDK					BIT5
++
++#define	CAM_CONTENT_COUNT 		8
++
++#define	CAM_NONE					0x0
++#define	CAM_WEP40					0x01
++#define	CAM_TKIP					0x02
++#define	CAM_AES					0x04
++#define	CAM_WEP104				0x05
++#define	CAM_SMS4					0x6
++
++
++#define	TOTAL_CAM_ENTRY			32
++#define	HALF_CAM_ENTRY			16	
++       		
++#define	CAM_CONFIG_USEDK			_TRUE
++#define	CAM_CONFIG_NO_USEDK		_FALSE
++       		
++#define	CAM_WRITE					BIT16
++#define	CAM_READ					0x00000000
++#define	CAM_POLLINIG				BIT31
++
++#define	SCR_UseDK					0x01
++#define	SCR_TxSecEnable			0x02
++#define	SCR_RxSecEnable			0x04
++
++
++//
++// 12. Host Interrupt Status Registers	 (Offset: 0x0300 - 0x030F)
++//
++//----------------------------------------------------------------------------
++//       8190 IMR/ISR bits						(offset 0xfd,  8bits)
++//----------------------------------------------------------------------------
++#define	IMR8190_DISABLED			0x0
++// IMR DW0 Bit 0-31
++#define	IMR_BCNDMAINT6			BIT31		// Beacon DMA Interrupt 6
++#define	IMR_BCNDMAINT5			BIT30		// Beacon DMA Interrupt 5
++#define	IMR_BCNDMAINT4			BIT29		// Beacon DMA Interrupt 4
++#define	IMR_BCNDMAINT3			BIT28		// Beacon DMA Interrupt 3
++#define	IMR_BCNDMAINT2			BIT27		// Beacon DMA Interrupt 2
++#define	IMR_BCNDMAINT1			BIT26		// Beacon DMA Interrupt 1
++#define	IMR_BCNDOK8				BIT25		// Beacon Queue DMA OK Interrup 8
++#define	IMR_BCNDOK7				BIT24		// Beacon Queue DMA OK Interrup 7
++#define	IMR_BCNDOK6				BIT23		// Beacon Queue DMA OK Interrup 6
++#define	IMR_BCNDOK5				BIT22		// Beacon Queue DMA OK Interrup 5
++#define	IMR_BCNDOK4				BIT21		// Beacon Queue DMA OK Interrup 4
++#define	IMR_BCNDOK3				BIT20		// Beacon Queue DMA OK Interrup 3
++#define	IMR_BCNDOK2				BIT19		// Beacon Queue DMA OK Interrup 2
++#define	IMR_BCNDOK1				BIT18		// Beacon Queue DMA OK Interrup 1
++#define	IMR_TIMEOUT2				BIT17		// Timeout interrupt 2
++#define	IMR_TIMEOUT1				BIT16		// Timeout interrupt 1
++#define	IMR_TXFOVW				BIT15		// Transmit FIFO Overflow
++#define	IMR_PSTIMEOUT				BIT14		// Power save time out interrupt 
++#define	IMR_BcnInt					BIT13		// Beacon DMA Interrupt 0
++#define	IMR_RXFOVW				BIT12		// Receive FIFO Overflow
++#define	IMR_RDU					BIT11		// Receive Descriptor Unavailable
++#define	IMR_ATIMEND				BIT10		// For 92C,ATIM Window End Interrupt
++#define	IMR_BDOK					BIT9		// Beacon Queue DMA OK Interrup
++#define	IMR_HIGHDOK				BIT8		// High Queue DMA OK Interrupt
++#define	IMR_TBDOK					BIT7		// Transmit Beacon OK interrup
++#define	IMR_MGNTDOK				BIT6		// Management Queue DMA OK Interrupt
++#define	IMR_TBDER					BIT5		// For 92C,Transmit Beacon Error Interrupt
++#define	IMR_BKDOK					BIT4		// AC_BK DMA OK Interrupt
++#define	IMR_BEDOK					BIT3		// AC_BE DMA OK Interrupt
++#define	IMR_VIDOK					BIT2		// AC_VI DMA OK Interrupt
++#define	IMR_VODOK					BIT1		// AC_VO DMA Interrupt
++#define	IMR_ROK					BIT0		// Receive DMA OK Interrupt
++
++// 13. Host Interrupt Status Extension Register	 (Offset: 0x012C-012Eh)
++#define	IMR_TXERR					BIT11
++#define	IMR_RXERR					BIT10
++#define	IMR_C2HCMD				BIT9
++#define	IMR_CPWM					BIT8
++//RSVD [2-7]
++#define	IMR_OCPINT					BIT1
++#define	IMR_WLANOFF				BIT0
++
++
++
++//----------------------------------------------------------------------------
++// 8192D EFUSE
++//----------------------------------------------------------------------------
++#define	HWSET_MAX_SIZE				256
++
++//----------------------------------------------------------------------------
++//       8192C EEPROM/EFUSE share register definition.
++//----------------------------------------------------------------------------
++
++//
++// Default Value for EEPROM or EFUSE!!!
++//
++#define	EEPROM_Default_TSSI					0x0
++#define 	EEPROM_Default_TxPowerDiff				0x0
++#define 	EEPROM_Default_CrystalCap				0x0		//92D default 0x0
++#define 	EEPROM_Default_BoardType				0x02 // Default: 2X2, RTL8192CE(QFPN68)
++#define 	EEPROM_Default_TxPower				0x1010
++#define	EEPROM_Default_HT2T_TxPwr				0x10
++
++#define	EEPROM_Default_LegacyHTTxPowerDiff	0x4
++#define	EEPROM_Default_ThermalMeter			0x12
++
++#define	EEPROM_Default_AntTxPowerDiff			0x0
++//#define	EEPROM_Default_TxPwDiff_CrystalCap		0x5
++#define	EEPROM_Default_TxPowerLevel_2G		0x2C
++#define	EEPROM_Default_TxPowerLevel_5G		0x22
++
++#define	EEPROM_Default_HT40_2SDiff				0x0
++#define 	EEPROM_Default_HT20_Diff				2	// HT20<->40 default Tx Power Index Difference
++#define	EEPROM_Default_LegacyHTTxPowerDiff	0x4	//OFDM Tx Power index diff
++#define 	EEPROM_Default_HT40_PwrMaxOffset		0
++#define 	EEPROM_Default_HT20_PwrMaxOffset		0
++
++// For debug
++#define 	EEPROM_Default_PID						0x1234
++#define 	EEPROM_Default_VID						0x5678
++#define 	EEPROM_Default_CustomerID				0xAB
++#define 	EEPROM_Default_SubCustomerID			0xCD
++#define 	EEPROM_Default_Version					0
++
++#define	EEPROM_Default_externalPA_C9		0x00
++#define	EEPROM_Default_externalPA_CC		0xFF
++#define	EEPROM_Default_internalPA_SP3T_C9	0xAA
++#define	EEPROM_Default_internalPA_SP3T_CC	0xAF
++#define	EEPROM_Default_internalPA_SPDT_C9	0xAA
++#ifdef CONFIG_PCI_HCI
++#define	EEPROM_Default_internalPA_SPDT_CC	0xA0
++#else
++#define	EEPROM_Default_internalPA_SPDT_CC	0xFA
++#endif
++
++#define	EEPROM_CHANNEL_PLAN_FCC				0x0
++#define	EEPROM_CHANNEL_PLAN_IC				0x1
++#define	EEPROM_CHANNEL_PLAN_ETSI			0x2
++#define	EEPROM_CHANNEL_PLAN_SPAIN			0x3
++#define	EEPROM_CHANNEL_PLAN_FRANCE			0x4
++#define	EEPROM_CHANNEL_PLAN_MKK				0x5
++#define	EEPROM_CHANNEL_PLAN_MKK1			0x6
++#define	EEPROM_CHANNEL_PLAN_ISRAEL			0x7
++#define	EEPROM_CHANNEL_PLAN_TELEC			0x8
++#define	EEPROM_CHANNEL_PLAN_GLOBAL_DOMAIN	0x9
++#define	EEPROM_CHANNEL_PLAN_WORLD_WIDE_13	0xA
++#define	EEPROM_CHANNEL_PLAN_NCC				0xB
++#define	EEPROM_CHANNEL_PLAN_BY_HW_MASK	0x80
++
++
++#define 	EEPROM_CID_DEFAULT					0x0
++#define 	EEPROM_CID_TOSHIBA					0x4
++#define	EEPROM_CID_CCX						0x10 // CCX test. By Bruce, 2009-02-25.
++#define	EEPROM_CID_QMI						0x0D
++#define 	EEPROM_CID_WHQL 						0xFE // added by chiyoko for dtm, 20090108
++
++
++#define	RTL8192_EEPROM_ID						0x8129
++#define	EEPROM_WAPI_SUPPORT					0x78
++
++
++#ifdef CONFIG_PCI_HCI
++#define RT_IBSS_INT_MASKS				(IMR_BcnInt | IMR_TBDOK | IMR_TBDER)
++#define RT_AC_INT_MASKS				(IMR_VIDOK | IMR_VODOK | IMR_BEDOK|IMR_BKDOK)
++#define RT_BSS_INT_MASKS				(RT_IBSS_INT_MASKS)
++
++#define RTL8190_EEPROM_ID						0x8129	// 0-1
++#define EEPROM_HPON							0x02 // LDO settings.2-5
++#define EEPROM_CLK								0x06 // Clock settings.6-7
++#define EEPROM_MAC_FUNCTION					0x08 // SE Test mode.8
++
++#define EEPROM_VID								0x28 // SE Vendor ID.A-B
++#define EEPROM_DID								0x2A // SE Device ID. C-D
++#define EEPROM_SVID								0x2C // SE Vendor ID.E-F
++#define EEPROM_SMID							0x2E // SE PCI Subsystem ID. 10-11
++
++#define EEPROM_MAC_ADDR						0x16 // SEMAC Address. 12-17
++#define EEPROM_MAC_ADDR_MAC0_92D			0x55
++#define EEPROM_MAC_ADDR_MAC1_92D			0x5B
++//----------------------------------------------------------------
++// 2.4G band Tx power index setting
++#define EEPROM_CCK_TX_PWR_INX_2G				0x61
++#define EEPROM_HT40_1S_TX_PWR_INX_2G		0x67
++#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_2G	0x6D
++#define EEPROM_HT20_TX_PWR_INX_DIFF_2G		0x70
++#define EEPROM_OFDM_TX_PWR_INX_DIFF_2G		0x73
++#define EEPROM_HT40_MAX_PWR_OFFSET_2G		0x76
++#define EEPROM_HT20_MAX_PWR_OFFSET_2G		0x79
++
++//5GL channel 32-64
++#define EEPROM_HT40_1S_TX_PWR_INX_5GL		0x7C
++#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_5GL	0x82
++#define EEPROM_HT20_TX_PWR_INX_DIFF_5GL		0x85
++#define EEPROM_OFDM_TX_PWR_INX_DIFF_5GL		0x88
++#define EEPROM_HT40_MAX_PWR_OFFSET_5GL		0x8B
++#define EEPROM_HT20_MAX_PWR_OFFSET_5GL		0x8E
++
++//5GM channel 100-140
++#define EEPROM_HT40_1S_TX_PWR_INX_5GM		0x91
++#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_5GM	0x97
++#define EEPROM_HT20_TX_PWR_INX_DIFF_5GM		0x9A
++#define EEPROM_OFDM_TX_PWR_INX_DIFF_5GM	0x9D
++#define EEPROM_HT40_MAX_PWR_OFFSET_5GM		0xA0
++#define EEPROM_HT20_MAX_PWR_OFFSET_5GM		0xA3
++
++//5GH channel 149-165
++#define EEPROM_HT40_1S_TX_PWR_INX_5GH		0xA6
++#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_5GH	0xAC
++#define EEPROM_HT20_TX_PWR_INX_DIFF_5GH		0xAF
++#define EEPROM_OFDM_TX_PWR_INX_DIFF_5GH		0xB2
++#define EEPROM_HT40_MAX_PWR_OFFSET_5GH		0xB5
++#define EEPROM_HT20_MAX_PWR_OFFSET_5GH		0xB8
++
++#define EEPROM_CHANNEL_PLAN					0xBB // Map of supported channels.	
++#define EEPROM_IQK_DELTA						0xBC
++#define EEPROM_LCK_DELTA						0xBC
++#define EEPROM_XTAL_K							0xBD	//[7:5]
++#define EEPROM_TSSI_A_5G						0xBE
++#define EEPROM_TSSI_B_5G						0xBF
++#define EEPROM_TSSI_AB_5G						0xC0
++#define EEPROM_THERMAL_METER					0xC3	//[4:0]
++#define EEPROM_PATHDIV							0xC4
++#define EEPROM_RF_OPT1							0xC4
++#define EEPROM_RF_OPT2							0xC5
++#define EEPROM_RF_OPT3							0xC6
++#define EEPROM_RF_OPT4							0xC7
++#define EEPROM_RF_OPT5							0xC8
++#define EEPROM_RF_OPT6							0xC9
++#define EEPROM_VERSION							0xCA
++#define EEPROM_CUSTOMER_ID					0xCB
++#define EEPROM_RF_OPT7							0xCC
++
++#define EEPROM_WIDIPAIRING_ADDR				0xF0
++#define EEPROM_WIDIPAIRING_KEY				0xF6
++
++#define EEPROM_DEF_PART_NO					0x3FD  //Byte
++#define EEPROME_CHIP_VERSION_L				0x3FF
++#define EEPROME_CHIP_VERSION_H				0x3FE
++#endif 
++
++#ifdef CONFIG_USB_HCI
++#define RTL8190_EEPROM_ID						0x8129	// 0-1
++#define EEPROM_HPON							0x02 // LDO settings.2-5
++#define EEPROM_CLK								0x06 // Clock settings.6-7
++#define EEPROM_MAC_FUNCTION					0x08 // SE Test mode.8
++
++#define EEPROM_VID								0xC // SE Vendor ID.A-B
++#define EEPROM_PID								0xE // SE Device ID. C-D
++#define EEPROM_ENDPOINT_SETTING				0x10
++#ifdef CONFIG_WOWLAN
++#define EEPROM_Option_Setting				0x11
++#endif // CONFIG_WOWLAN
++#define EEPROM_CHIRP_K							0x12	// Changed
++#define EEPROM_USB_PHY							0x13	// Changed
++#define EEPROM_NORMAL_BoardType				EEPROM_RF_OPT1	//[7:5]
++#define EEPROM_MAC_ADDR						0x16 // SEMAC Address. 12-17
++#define EEPROM_STRING							0x1F
++#define EEPROM_SUBCUSTOMER_ID					0x59
++
++#define EEPROM_MAC_ADDR_MAC0_92D			0x19
++#define EEPROM_MAC_ADDR_MAC1_92D			0x5B
++//----------------------------------------------------------------
++// 2.4G band Tx power index setting
++#define EEPROM_CCK_TX_PWR_INX_2G				0x61
++#define EEPROM_HT40_1S_TX_PWR_INX_2G		0x67
++#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_2G	0x6D
++#define EEPROM_HT20_TX_PWR_INX_DIFF_2G		0x70
++#define EEPROM_OFDM_TX_PWR_INX_DIFF_2G		0x73
++#define EEPROM_HT40_MAX_PWR_OFFSET_2G		0x76
++#define EEPROM_HT20_MAX_PWR_OFFSET_2G		0x79
++
++//5GL channel 32-64
++#define EEPROM_HT40_1S_TX_PWR_INX_5GL		0x7C
++#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_5GL	0x82
++#define EEPROM_HT20_TX_PWR_INX_DIFF_5GL		0x85
++#define EEPROM_OFDM_TX_PWR_INX_DIFF_5GL		0x88
++#define EEPROM_HT40_MAX_PWR_OFFSET_5GL		0x8B
++#define EEPROM_HT20_MAX_PWR_OFFSET_5GL		0x8E
++
++//5GM channel 100-140
++#define EEPROM_HT40_1S_TX_PWR_INX_5GM		0x91
++#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_5GM	0x97
++#define EEPROM_HT20_TX_PWR_INX_DIFF_5GM		0x9A
++#define EEPROM_OFDM_TX_PWR_INX_DIFF_5GM	0x9D
++#define EEPROM_HT40_MAX_PWR_OFFSET_5GM		0xA0
++#define EEPROM_HT20_MAX_PWR_OFFSET_5GM		0xA3
++
++//5GH channel 149-165
++#define EEPROM_HT40_1S_TX_PWR_INX_5GH		0xA6
++#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_5GH	0xAC
++#define EEPROM_HT20_TX_PWR_INX_DIFF_5GH		0xAF
++#define EEPROM_OFDM_TX_PWR_INX_DIFF_5GH		0xB2
++#define EEPROM_HT40_MAX_PWR_OFFSET_5GH		0xB5
++#define EEPROM_HT20_MAX_PWR_OFFSET_5GH		0xB8
++
++#define EEPROM_CHANNEL_PLAN					0xBB // Map of supported channels.	
++#define EEPROM_TEST_CHANNEL_PLAN				0xBB
++#define EEPROM_IQK_DELTA						0xBC
++#define EEPROM_LCK_DELTA						0xBC
++#define EEPROM_XTAL_K							0xBD	//[7:5]
++#define EEPROM_TSSI_A_5G						0xBE
++#define EEPROM_TSSI_B_5G						0xBF
++#define EEPROM_TSSI_AB_5G						0xC0
++#define EEPROM_THERMAL_METER					0xC3	//[4:0]
++#define EEPROM_RF_OPT1							0xC4
++#define EEPROM_RF_OPT2							0xC5
++#define EEPROM_RF_OPT3							0xC6
++#define EEPROM_RF_OPT4							0xC7
++#define EEPROM_RF_OPT5							0xC8
++#define EEPROM_RF_OPT6							0xC9
++#define EEPROM_VERSION							0xCA
++#define EEPROM_CUSTOMER_ID					0xCB
++#define EEPROM_RF_OPT7							0xCC
++
++#define EEPROM_DEF_PART_NO					0x3FD  //Byte
++#define EEPROME_CHIP_VERSION_L				0x3FF
++#define EEPROME_CHIP_VERSION_H				0x3FE
++
++//-------------------------------------------------------------
++//	EEPROM content definitions
++//-------------------------------------------------------------
++#define OS_LINK_SPEED_NORMAL_MASK			BIT3 | BIT2
++#define OS_LINK_SPEED_TEST_MASK				BIT3 | BIT4
++
++#define BOARD_TYPE_NORMAL_MASK				0xE0
++#define BOARD_TYPE_TEST_MASK					0xF
++
++#define BT_COEXISTENCE_TEST					BIT4
++#define BT_COEXISTENCE_NORMAL					BIT5
++
++#define BT_CO_SHIFT_TEST						4
++#define BT_CO_SHIFT_NORMAL					5
++
++#define EP_NUMBER_MASK_TEST					0x30	//bit 4:5 0Eh
++#define EP_NUMBER_SHIFT_TEST					4
++
++#define USB_PHY_PARA_SIZE_TEST				6
++#define USB_PHY_PARA_SIZE_NORMAL				4
++
++//-------------------------------------------------------------
++//	EEPROM default value definitions
++//-------------------------------------------------------------
++// Use 0xABCD instead of 0x8192 for debug
++#define	EEPROM_DEF_ID_0						0xCD	// Byte 0x00
++#define	EEPROM_DEF_ID_1						0xAB	// Byte 0x01
++
++#define EEPROM_DEF_RTK_RSV_A3					0x74	// Byte 0x03
++#define EEPROM_DEF_RTK_RSV_A4					0x6D	// Byte 0x04
++#define EEPROM_DEF_RTK_RSV_A8					0xFF	// Byte 0x08
++
++#define EEPROM_DEF_VID_0						0x0A	// Byte 0x0A
++#define EEPROM_DEF_VID_1						0x0B
++
++#define EEPROM_DEF_PID_0						0x92	// Byte 0x0C
++#define EEPROM_DEF_PID_1						0x81
++
++
++#define EEPROM_TEST_DEF_USB_OPT				0x80	// Byte 0x0E
++#define EEPROM_NORMAL_DEF_USB_OPT			0x00	// Byte 0x0E
++
++#define EEPROM_DEF_CHIRPK						0x15	// Byte 0x0F
++
++#define EEPROM_DEF_USB_PHY_0					0x85	// Byte 0x10
++#define EEPROM_DEF_USB_PHY_1					0x62	// Byte 0x11
++#define EEPROM_DEF_USB_PHY_2					0x9E	// Byte 0x12
++#define EEPROM_DEF_USB_PHY_3					0x06	// Byte 0x13
++
++#define EEPROM_DEF_TSSI_A						0x09	// Byte 0x78
++#define EEPROM_DEF_TSSI_B						0x09	// Byte 0x79
++
++
++#define EEPROM_DEF_THERMAL_METER				0x12	// Byte 0x7A
++
++
++#define	EEPROM_USB_SN							BIT(0)
++#define	EEPROM_USB_REMOTE_WAKEUP			BIT(1)
++#define	EEPROM_USB_DEVICE_PWR				BIT(2)
++#define	EEPROM_EP_NUMBER						(BIT(3)|BIT(4))
++
++#if 0
++#define	EEPROM_CHANNEL_PLAN_FCC					0x0
++#define	EEPROM_CHANNEL_PLAN_IC					0x1
++#define	EEPROM_CHANNEL_PLAN_ETSI				0x2
++#define	EEPROM_CHANNEL_PLAN_SPAIN				0x3
++#define	EEPROM_CHANNEL_PLAN_FRANCE				0x4
++#define	EEPROM_CHANNEL_PLAN_MKK					0x5
++#define	EEPROM_CHANNEL_PLAN_MKK1				0x6
++#define	EEPROM_CHANNEL_PLAN_ISRAEL				0x7
++#define	EEPROM_CHANNEL_PLAN_TELEC				0x8
++#define	EEPROM_CHANNEL_PLAN_GLOBAL_DOMAIN		0x9
++#define	EEPROM_CHANNEL_PLAN_WORLD_WIDE_13		0xA
++#define	EEPROM_CHANNEL_PLAN_BY_HW_MASK			0x80
++
++#define	EEPROM_CID_DEFAULT						0x0
++
++#define	EEPROM_CID_WHQL 						0xFE // added by chiyoko for dtm, 20090108
++
++
++#define	EEPROM_CID_CCX							0x10 // CCX test. By Bruce, 2009-02-25.
++
++#endif
++#endif
++
++
++/*===================================================================
++=====================================================================
++Here the register defines are for 92C. When the define is as same with 92C, 
++we will use the 92C's define for the consistency
++So the following defines for 92C is not entire!!!!!!
++=====================================================================
++=====================================================================*/
++/*
++Based on Datasheet V33---090401
++Register Summary
++Current IOREG MAP
++0x0000h ~ 0x00FFh   System Configuration (256 Bytes)
++0x0100h ~ 0x01FFh   MACTOP General Configuration (256 Bytes)
++0x0200h ~ 0x027Fh   TXDMA Configuration (128 Bytes)
++0x0280h ~ 0x02FFh   RXDMA Configuration (128 Bytes)
++0x0300h ~ 0x03FFh   PCIE EMAC Reserved Region (256 Bytes)
++0x0400h ~ 0x04FFh   Protocol Configuration (256 Bytes)
++0x0500h ~ 0x05FFh   EDCA Configuration (256 Bytes)
++0x0600h ~ 0x07FFh   WMAC Configuration (512 Bytes)
++0x2000h ~ 0x3FFFh   8051 FW Download Region (8196 Bytes)
++*/
++
++//----------------------------------------------------------------------------
++//       8192C (RCR) Receive Configuration Register	(Offset 0x608, 32 bits)
++//----------------------------------------------------------------------------
++#define	RCR_APPFCS					BIT31		//WMAC append FCS after pauload
++#define	RCR_APP_MIC				BIT30		//
++#define	RCR_APP_ICV				BIT29       //
++#define	RCR_APP_PHYST_RXFF		BIT28       //
++#define	RCR_APP_BA_SSN			BIT27		//Accept BA SSN
++#define	RCR_ENMBID					BIT24		//Enable Multiple BssId.
++#define	RCR_LSIGEN					BIT23
++#define	RCR_MFBEN					BIT22
++#define	RCR_HTC_LOC_CTRL			BIT14       //MFC<--HTC=1 MFC-->HTC=0
++#define	RCR_AMF					BIT13		//Accept management type frame
++#define	RCR_ACF					BIT12		//Accept control type frame
++#define	RCR_ADF					BIT11		//Accept data type frame
++#define	RCR_AICV					BIT9		//Accept ICV error packet
++#define	RCR_ACRC32					BIT8		//Accept CRC32 error packet 
++#define	RCR_CBSSID_BCN			BIT7		//Accept BSSID match packet (Rx beacon, probe rsp)
++#define	RCR_CBSSID_DATA			BIT6		//Accept BSSID match packet (Data)
++#define	RCR_CBSSID					RCR_CBSSID_DATA		//Accept BSSID match packet
++#define	RCR_APWRMGT				BIT5		//Accept power management packet
++#define	RCR_ADD3					BIT4		//Accept address 3 match packet
++#define	RCR_AB						BIT3		//Accept broadcast packet 
++#define	RCR_AM						BIT2		//Accept multicast packet 
++#define	RCR_APM					BIT1		//Accept physical match packet
++#define	RCR_AAP					BIT0		//Accept all unicast packet 
++#define	RCR_MXDMA_OFFSET			8
++#define	RCR_FIFO_OFFSET			13
++
++
++
++//============================================================================
++//       8192c USB specific Regsiter Offset and Content definition, 
++//       2009.08.18, added by vivi. for merge 92c and 92C into one driver
++//============================================================================
++//#define APS_FSMCO				0x0004  same with 92Ce
++#define RSV_CTRL					0x001C
++#define RD_CTRL					0x0524
++
++//-----------------------------------------------------
++//
++//	0xFE00h ~ 0xFE55h	USB Configuration
++//
++//-----------------------------------------------------
++#define REG_USB_INFO				0xFE17
++#define REG_USB_SPECIAL_OPTION	0xFE55
++#define REG_USB_DMA_AGG_TO		0xFE5B
++#define REG_USB_AGG_TO				0xFE5C
++#define REG_USB_AGG_TH				0xFE5D
++
++#define REG_USB_VID					0xFE60
++#define REG_USB_PID					0xFE62
++#define REG_USB_OPTIONAL			0xFE64
++#define REG_USB_CHIRP_K			0xFE65
++#define REG_USB_PHY					0xFE66
++#define REG_USB_MAC_ADDR			0xFE70
++
++#define REG_USB_HRPWM				0xFE58
++#define REG_USB_HCPWM				0xFE57
++
++#define InvalidBBRFValue			0x12345678
++
++//============================================================================
++//       8192C Regsiter Bit and Content definition 
++//============================================================================
++//-----------------------------------------------------
++//
++//	0x0000h ~ 0x00FFh	System Configuration
++//
++//-----------------------------------------------------
++
++//2 SPS0_CTRL
++#define SW18_FPWM					BIT(3)
++
++
++//2 SYS_ISO_CTRL
++#define ISO_MD2PP					BIT(0)
++#define ISO_UA2USB					BIT(1)
++#define ISO_UD2CORE					BIT(2)
++#define ISO_PA2PCIE					BIT(3)
++#define ISO_PD2CORE					BIT(4)
++#define ISO_IP2MAC					BIT(5)
++#define ISO_DIOP						BIT(6)
++#define ISO_DIOE						BIT(7)
++#define ISO_EB2CORE					BIT(8)
++#define ISO_DIOR						BIT(9)
++
++#define PWC_EV25V					BIT(14)
++#define PWC_EV12V					BIT(15)
++
++
++//2 SYS_FUNC_EN
++#define FEN_BBRSTB					BIT(0)
++#define FEN_BB_GLB_RSTn			BIT(1)
++#define FEN_USBA					BIT(2)
++#define FEN_UPLL					BIT(3)
++#define FEN_USBD					BIT(4)
++#define FEN_DIO_PCIE				BIT(5)
++#define FEN_PCIEA					BIT(6)
++#define FEN_PPLL						BIT(7)
++#define FEN_PCIED					BIT(8)
++#define FEN_DIOE					BIT(9)
++#define FEN_CPUEN					BIT(10)
++#define FEN_DCORE					BIT(11)
++#define FEN_ELDR					BIT(12)
++#define FEN_DIO_RF					BIT(13)
++#define FEN_HWPDN					BIT(14)
++#define FEN_MREGEN					BIT(15)
++
++//2 APS_FSMCO
++#define PFM_LDALL					BIT(0)
++#define PFM_ALDN					BIT(1)
++#define PFM_LDKP					BIT(2)
++#define PFM_WOWL					BIT(3)
++#define EnPDN						BIT(4)
++#define PDN_PL						BIT(5)
++#define APFM_ONMAC					BIT(8)
++#define APFM_OFF					BIT(9)
++#define APFM_RSM					BIT(10)
++#define AFSM_HSUS					BIT(11)
++#define AFSM_PCIE					BIT(12)
++#define APDM_MAC					BIT(13)
++#define APDM_HOST					BIT(14)
++#define APDM_HPDN					BIT(15)
++#define RDY_MACON					BIT(16)
++#define SUS_HOST					BIT(17)
++#define ROP_ALD						BIT(20)
++#define ROP_PWR						BIT(21)
++#define ROP_SPS						BIT(22)
++#define SOP_MRST					BIT(25)
++#define SOP_FUSE					BIT(26)
++#define SOP_ABG						BIT(27)
++#define SOP_AMB						BIT(28)
++#define SOP_RCK						BIT(29)
++#define SOP_A8M						BIT(30)
++#define XOP_BTCK					BIT(31)
++
++//2 SYS_CLKR
++#define ANAD16V_EN					BIT(0)
++#define ANA8M						BIT(1)
++#define MACSLP						BIT(4)
++#define LOADER_CLK_EN				BIT(5)
++#define _80M_SSC_DIS				BIT(7)
++#define _80M_SSC_EN_HO				BIT(8)
++#define PHY_SSC_RSTB				BIT(9)
++#define SEC_CLK_EN					BIT(10)
++#define MAC_CLK_EN					BIT(11)
++#define SYS_CLK_EN					BIT(12)
++#define RING_CLK_EN					BIT(13)
++
++
++//2 9346CR
++
++#define BOOT_FROM_EEPROM			BIT(4)
++#define EEPROM_EN					BIT(5)
++
++
++//2 AFE_MISC
++#define AFE_BGEN					BIT(0)
++#define AFE_MBEN					BIT(1)
++#define MAC_ID_EN					BIT(7)
++
++
++//2 SPS0_CTRL
++
++
++//2 SPS_OCP_CFG
++
++
++//2 RSV_CTRL
++#define WLOCK_ALL					BIT(0)
++#define WLOCK_00					BIT(1)
++#define WLOCK_04					BIT(2)
++#define WLOCK_08					BIT(3)
++#define WLOCK_40					BIT(4)
++#define R_DIS_PRST_0				BIT(5)
++#define R_DIS_PRST_1				BIT(6)
++#define LOCK_ALL_EN					BIT(7)
++
++//2 RF_CTRL
++#define RF_EN						BIT(0)
++#define RF_RSTB						BIT(1)
++#define RF_SDMRSTB					BIT(2)
++
++
++
++//2 LDOA15_CTRL
++#define LDA15_EN					BIT(0)
++#define LDA15_STBY					BIT(1)
++#define LDA15_OBUF					BIT(2)
++#define LDA15_REG_VOS				BIT(3)
++#define _LDA15_VOADJ(x)				(((x) & 0x7) << 4)
++
++
++
++//2 LDOV12D_CTRL
++#define LDV12_EN					BIT(0)
++#define LDV12_SDBY					BIT(1)
++#define LPLDO_HSM					BIT(2)
++#define LPLDO_LSM_DIS				BIT(3)
++#define _LDV12_VADJ(x)				(((x) & 0xF) << 4)
++
++
++//2 AFE_XTAL_CTRL
++#define XTAL_EN						BIT(0)
++#define XTAL_BSEL					BIT(1)
++#define _XTAL_BOSC(x)				(((x) & 0x3) << 2)
++#define _XTAL_CADJ(x)				(((x) & 0xF) << 4)
++#define XTAL_GATE_USB				BIT(8)
++#define _XTAL_USB_DRV(x)			(((x) & 0x3) << 9)
++#define XTAL_GATE_AFE				BIT(11)
++#define _XTAL_AFE_DRV(x)			(((x) & 0x3) << 12)
++#define XTAL_RF_GATE				BIT(14)
++#define _XTAL_RF_DRV(x)				(((x) & 0x3) << 15)
++#define XTAL_GATE_DIG				BIT(17)
++#define _XTAL_DIG_DRV(x)			(((x) & 0x3) << 18)
++#define XTAL_BT_GATE				BIT(20)
++#define _XTAL_BT_DRV(x)				(((x) & 0x3) << 21)
++#define _XTAL_GPIO(x)				(((x) & 0x7) << 23)
++
++
++#define CKDLY_AFE					BIT(26)
++#define CKDLY_USB					BIT(27)
++#define CKDLY_DIG					BIT(28)
++#define CKDLY_BT					BIT(29)
++
++
++//2 AFE_PLL_CTRL
++#define APLL_EN						BIT(0)
++#define APLL_320_EN					BIT(1)
++#define APLL_FREF_SEL				BIT(2)
++#define APLL_EDGE_SEL				BIT(3)
++#define APLL_WDOGB					BIT(4)
++#define APLL_LPFEN					BIT(5)
++
++#define APLL_REF_CLK_13MHZ			0x1
++#define APLL_REF_CLK_19_2MHZ		0x2
++#define APLL_REF_CLK_20MHZ			0x3
++#define APLL_REF_CLK_25MHZ			0x4
++#define APLL_REF_CLK_26MHZ			0x5
++#define APLL_REF_CLK_38_4MHZ		0x6
++#define APLL_REF_CLK_40MHZ			0x7
++
++#define APLL_320EN					BIT(14)
++#define APLL_80EN					BIT(15)
++#define APLL_1MEN					BIT(24)
++
++
++//2 EFUSE_CTRL
++#define ALD_EN						BIT(18)
++#define EF_PD						BIT(19)
++#define EF_FLAG						BIT(31)
++
++//2 EFUSE_TEST 
++#define EF_TRPT						BIT(7)
++#define LDOE25_EN					BIT(31)
++
++//2 PWR_DATA 
++
++//2 CAL_TIMER
++
++//2 ACLK_MON
++#define RSM_EN						BIT(0)
++#define Timer_EN						BIT(4)
++
++
++//2 GPIO_MUXCFG
++#define TRSW0EN						BIT(2)
++#define TRSW1EN						BIT(3)
++#define EROM_EN						BIT(4)
++#define EnBT							BIT(5)
++#define EnUart						BIT(8)
++#define Uart_910						BIT(9)
++#define EnPMAC						BIT(10)
++#define SIC_SWRST					BIT(11)
++#define EnSIC						BIT(12)
++#define SIC_23						BIT(13)
++#define EnHDP						BIT(14)
++#define SIC_LBK						BIT(15)
++
++//2 GPIO_PIN_CTRL
++
++
++
++//2 GPIO_INTM
++
++//2 LEDCFG
++#define LED0PL 					BIT(4)  
++#define LED1PL 					BIT(12)
++#define LED0DIS					BIT(7)
++
++#define  SECCAM_CLR				BIT(30)
++
++//2 FSIMR
++
++//2 FSISR
++
++
++//2 8051FWDL
++//2 MCUFWDL
++#define MCUFWDL_EN					BIT(0)
++#define MCUFWDL_RDY				BIT(1)
++#define FWDL_ChkSum_rpt			BIT(2)
++#define MACINI_RDY					BIT(3)
++#define BBINI_RDY					BIT(4)
++#define RFINI_RDY					BIT(5)
++#define WINTINI_RDY					BIT(6)
++#define MAC1_WINTINI_RDY			BIT(11)// 0X81 BIT3
++#define CPRST						BIT(23)
++
++
++
++
++//2 REG_SYS_CFG
++#define XCLK_VLD						BIT(0)
++#define ACLK_VLD					BIT(1)
++#define UCLK_VLD					BIT(2)
++#define PCLK_VLD						BIT(3)
++#define PCIRSTB						BIT(4)
++#define V15_VLD						BIT(5)
++#define TRP_B15V_EN					BIT(7)
++#define SIC_IDLE						BIT(8)
++#define BD_MAC2						BIT(9)
++#define BD_MAC1						BIT(10)
++#define IC_MACPHY_MODE				BIT(11)
++#define PAD_HWPD_IDN				BIT(22)
++#define TRP_VAUX_EN					BIT(23)
++#define TRP_BT_EN					BIT(24)
++#define BD_PKG_SEL					BIT(25)
++#define BD_HCI_SEL					BIT(26)
++#define TYPE_ID						BIT(27)
++
++#define CHIP_VER_RTL_MASK			0xF000	//Bit 12 ~ 15
++#define CHIP_VER_RTL_SHIFT			12
++
++//-----------------------------------------------------
++//
++//	0x0100h ~ 0x01FFh	MACTOP General Configuration
++//
++//-----------------------------------------------------
++
++
++//2 Function Enable Registers
++//2 CR
++
++#define REG_LBMODE					(REG_CR + 3)
++
++
++#define HCI_TXDMA_EN				BIT(0)
++#define HCI_RXDMA_EN				BIT(1)
++#define TXDMA_EN					BIT(2)
++#define RXDMA_EN					BIT(3)
++#define PROTOCOL_EN					BIT(4)
++#define SCHEDULE_EN					BIT(5)
++#define MACTXEN						BIT(6)
++#define MACRXEN						BIT(7)
++#define ENSWBCN						BIT(8)
++#define ENSEC						BIT(9)
++
++// Network type
++#define _NETTYPE(x)					(((x) & 0x3) << 16)
++#define MASK_NETTYPE				0x30000
++#define NT_NO_LINK					0x0
++#define NT_LINK_AD_HOC				0x1
++#define NT_LINK_AP					0x2
++#define NT_AS_AP					0x3
++
++#define _LBMODE(x)					(((x) & 0xF) << 24)
++#define MASK_LBMODE				0xF000000
++#define LOOPBACK_NORMAL			0x0
++#define LOOPBACK_IMMEDIATELY		0xB
++#define LOOPBACK_MAC_DELAY		0x3
++#define LOOPBACK_PHY				0x1
++#define LOOPBACK_DMA				0x7
++
++
++//2 PBP - Page Size Register
++#define GET_RX_PAGE_SIZE(value)		((value) & 0xF)
++#define GET_TX_PAGE_SIZE(value)		(((value) & 0xF0) >> 4)
++#define _PSRX_MASK					0xF
++#define _PSTX_MASK					0xF0
++#define _PSRX(x)						(x)
++#define _PSTX(x)						((x) << 4)
++
++#define PBP_64						0x0
++#define PBP_128						0x1
++#define PBP_256						0x2
++#define PBP_512						0x3
++#define PBP_1024					0x4
++
++
++//2 TX/RXDMA
++#define RXDMA_ARBBW_EN			BIT(0)
++#define RXSHFT_EN					BIT(1)
++#define RXDMA_AGG_EN				BIT(2)
++#define QS_VO_QUEUE				BIT(8)
++#define QS_VI_QUEUE					BIT(9)
++#define QS_BE_QUEUE				BIT(10)
++#define QS_BK_QUEUE				BIT(11)
++#define QS_MANAGER_QUEUE			BIT(12)
++#define QS_HIGH_QUEUE				BIT(13)
++
++#define HQSEL_VOQ					BIT(0)
++#define HQSEL_VIQ					BIT(1)
++#define HQSEL_BEQ					BIT(2)
++#define HQSEL_BKQ					BIT(3)
++#define HQSEL_MGTQ					BIT(4)
++#define HQSEL_HIQ					BIT(5)
++
++// For normal driver, 0x10C
++#define _TXDMA_HIQ_MAP(x) 	 		(((x)&0x3) << 14)
++#define _TXDMA_MGQ_MAP(x) 	 		(((x)&0x3) << 12)
++#define _TXDMA_BKQ_MAP(x) 	 		(((x)&0x3) << 10)		
++#define _TXDMA_BEQ_MAP(x) 	 		(((x)&0x3) << 8 )
++#define _TXDMA_VIQ_MAP(x) 	 		(((x)&0x3) << 6 )
++#define _TXDMA_VOQ_MAP(x) 	 		(((x)&0x3) << 4 )
++
++#define QUEUE_LOW					1
++#define QUEUE_NORMAL				2
++#define QUEUE_HIGH					3
++
++
++
++//2 TRXFF_BNDY
++
++
++//2 LLT_INIT
++#define _LLT_NO_ACTIVE				0x0
++#define _LLT_WRITE_ACCESS			0x1
++#define _LLT_READ_ACCESS			0x2
++
++#define _LLT_INIT_DATA(x)			((x) & 0xFF)
++#define _LLT_INIT_ADDR(x)			(((x) & 0xFF) << 8)
++#define _LLT_OP(x)					(((x) & 0x3) << 30)
++#define _LLT_OP_VALUE(x)			(((x) >> 30) & 0x3)
++
++
++//2 BB_ACCESS_CTRL
++#define BB_WRITE_READ_MASK		(BIT(31) | BIT(30))
++#define BB_WRITE_EN					BIT(30)
++#define BB_READ_EN					BIT(31)
++//#define BB_ADDR_MASK				0xFFF
++//#define _BB_ADDR(x)					((x) & BB_ADDR_MASK)
++
++//-----------------------------------------------------
++//
++//	0x0200h ~ 0x027Fh	TXDMA Configuration
++//
++//-----------------------------------------------------
++//2 RQPN
++#define _HPQ(x)						((x) & 0xFF)
++#define _LPQ(x)						(((x) & 0xFF) << 8)
++#define _PUBQ(x)						(((x) & 0xFF) << 16)
++#define _NPQ(x)						((x) & 0xFF)			// NOTE: in RQPN_NPQ register
++
++
++#define HPQ_PUBLIC_DIS				BIT(24)
++#define LPQ_PUBLIC_DIS				BIT(25)
++#define LD_RQPN						BIT(31)
++
++
++//2 TDECTRL
++#define BCN_VALID					BIT(16)
++#define BCN_HEAD(x)					(((x) & 0xFF) << 8)
++#define	BCN_HEAD_MASK				0xFF00
++
++//2 TDECTL
++#define BLK_DESC_NUM_SHIFT			4
++#define BLK_DESC_NUM_MASK			0xF
++
++
++//2 TXDMA_OFFSET_CHK
++#define DROP_DATA_EN				BIT(9)
++
++//-----------------------------------------------------
++//
++//	0x0400h ~ 0x047Fh	Protocol Configuration
++//
++//-----------------------------------------------------
++//2 FWHW_TXQ_CTRL
++#define EN_AMPDU_RTY_NEW			BIT(7)
++
++//2 INIRTSMCS_SEL
++#define _INIRTSMCS_SEL(x)			((x) & 0x3F)
++
++
++//2 SPEC SIFS
++#define _SPEC_SIFS_CCK(x)			((x) & 0xFF)
++#define _SPEC_SIFS_OFDM(x)			(((x) & 0xFF) << 8)
++
++
++//2 RRSR
++
++#define RATE_REG_BITMAP_ALL			0xFFFFF
++
++#define _RRSC_BITMAP(x)					((x) & 0xFFFFF)
++
++#define _RRSR_RSC(x)						(((x) & 0x3) << 21)
++#define RRSR_RSC_RESERVED				0x0
++#define RRSR_RSC_UPPER_SUBCHANNEL	0x1
++#define RRSR_RSC_LOWER_SUBCHANNEL	0x2
++#define RRSR_RSC_DUPLICATE_MODE		0x3
++
++
++//2 ARFR
++#define USE_SHORT_G1				BIT(20)
++
++//2 AGGLEN_LMT_L
++#define _AGGLMT_MCS0(x)				((x) & 0xF)
++#define _AGGLMT_MCS1(x)				(((x) & 0xF) << 4)
++#define _AGGLMT_MCS2(x)				(((x) & 0xF) << 8)
++#define _AGGLMT_MCS3(x)				(((x) & 0xF) << 12)
++#define _AGGLMT_MCS4(x)				(((x) & 0xF) << 16)
++#define _AGGLMT_MCS5(x)				(((x) & 0xF) << 20)
++#define _AGGLMT_MCS6(x)				(((x) & 0xF) << 24)
++#define _AGGLMT_MCS7(x)				(((x) & 0xF) << 28)
++
++
++//2 RL
++#define	RETRY_LIMIT_SHORT_SHIFT		8
++#define	RETRY_LIMIT_LONG_SHIFT		0
++
++
++//2 DARFRC
++#define _DARF_RC1(x)				((x) & 0x1F)
++#define _DARF_RC2(x)				(((x) & 0x1F) << 8)
++#define _DARF_RC3(x)				(((x) & 0x1F) << 16)
++#define _DARF_RC4(x)				(((x) & 0x1F) << 24)
++// NOTE: shift starting from address (DARFRC + 4)
++#define _DARF_RC5(x)				((x) & 0x1F)
++#define _DARF_RC6(x)				(((x) & 0x1F) << 8)
++#define _DARF_RC7(x)				(((x) & 0x1F) << 16)
++#define _DARF_RC8(x)				(((x) & 0x1F) << 24)
++
++
++//2 RARFRC
++#define _RARF_RC1(x)				((x) & 0x1F)
++#define _RARF_RC2(x)				(((x) & 0x1F) << 8)
++#define _RARF_RC3(x)				(((x) & 0x1F) << 16)
++#define _RARF_RC4(x)				(((x) & 0x1F) << 24)
++// NOTE: shift starting from address (RARFRC + 4)
++#define _RARF_RC5(x)				((x) & 0x1F)
++#define _RARF_RC6(x)				(((x) & 0x1F) << 8)
++#define _RARF_RC7(x)				(((x) & 0x1F) << 16)
++#define _RARF_RC8(x)				(((x) & 0x1F) << 24)
++
++
++
++
++//-----------------------------------------------------
++//
++//	0x0500h ~ 0x05FFh	EDCA Configuration
++//
++//-----------------------------------------------------
++
++
++
++//2 EDCA setting
++#define AC_PARAM_TXOP_LIMIT_OFFSET	16
++#define AC_PARAM_ECW_MAX_OFFSET		12
++#define AC_PARAM_ECW_MIN_OFFSET		8
++#define AC_PARAM_AIFS_OFFSET			0
++
++
++//2 EDCA_VO_PARAM
++#define _AIFS(x)						(x)
++#define _ECW_MAX_MIN(x)			((x) << 8)
++#define _TXOP_LIMIT(x)				((x) << 16)
++
++
++#define _BCNIFS(x)					((x) & 0xFF)
++#define _BCNECW(x)					(((x) & 0xF))<< 8)
++
++
++#define _LRL(x)						((x) & 0x3F)
++#define _SRL(x)						(((x) & 0x3F) << 8)
++
++
++//2 SIFS_CCK
++#define _SIFS_CCK_CTX(x)			((x) & 0xFF)
++#define _SIFS_CCK_TRX(x)			(((x) & 0xFF) << 8);
++
++
++//2 SIFS_OFDM
++#define _SIFS_OFDM_CTX(x)			((x) & 0xFF)
++#define _SIFS_OFDM_TRX(x)			(((x) & 0xFF) << 8);
++
++
++//2 TBTT PROHIBIT
++#define _TBTT_PROHIBIT_HOLD(x)		(((x) & 0xFF) << 8)
++
++
++//2 REG_RD_CTRL
++#define DIS_EDCA_CNT_DWN			BIT(11)
++
++
++//2 BCN_CTRL
++#define EN_MBSSID						BIT(1)
++#define EN_TXBCN_RPT					BIT(2)
++#define EN_BCN_FUNCTION				BIT(3)
++// The same function but different bit field.
++#define DIS_TSF_UDT0_NORMAL_CHIP		BIT(4)
++#define DIS_TSF_UDT0_TEST_CHIP		BIT(5)
++
++//2 ACMHWCTRL
++#define	AcmHw_HwEn					BIT(0)
++#define	AcmHw_BeqEn					BIT(1)
++#define	AcmHw_ViqEn					BIT(2)
++#define	AcmHw_VoqEn					BIT(3)
++#define	AcmHw_BeqStatus				BIT(4)
++#define	AcmHw_ViqStatus				BIT(5)
++#define	AcmHw_VoqStatus				BIT(6)
++
++
++
++//-----------------------------------------------------
++//
++//	0x0600h ~ 0x07FFh	WMAC Configuration
++//
++//-----------------------------------------------------
++
++//2 APSD_CTRL
++#define APSDOFF						BIT(6)
++#define APSDOFF_STATUS				BIT(7)
++
++
++//2 BWOPMODE
++#define BW_20MHZ					BIT(2)
++//#define BW_OPMODE_20MHZ				BIT(2)	// For compability
++
++
++#define RATE_BITMAP_ALL			0xFFFFF
++
++// Only use CCK 1M rate for ACK
++#define RATE_RRSR_CCK_ONLY_1M		0xFFFF1
++#define RATE_RRSR_WITHOUT_CCK		0xFFFF0
++
++//2 TCR
++#define TSFRST						BIT(0)
++#define DIS_GCLK						BIT(1)
++#define PAD_SEL						BIT(2)
++#define PWR_ST						BIT(6)
++#define PWRBIT_OW_EN				BIT(7)
++#define ACRC							BIT(8)
++#define CFENDFORM					BIT(9)
++#define ICV							BIT(10)
++
++
++
++//2 RCR
++#define AAP							BIT(0)
++#define APM							BIT(1)
++#define AM							BIT(2)
++#define AB							BIT(3)
++#define ADD3							BIT(4)
++#define APWRMGT					BIT(5)
++#define CBSSID						BIT(6)
++#define CBSSID_BCN					BIT(7)
++#define ACRC32						BIT(8)
++#define AICV							BIT(9)
++#define ADF							BIT(11)
++#define ACF							BIT(12)
++#define AMF							BIT(13)
++#define HTC_LOC_CTRL				BIT(14)
++#define UC_DATA_EN					BIT(16)
++#define BM_DATA_EN					BIT(17)
++#define MFBEN						BIT(22)
++#define LSIGEN						BIT(23)
++#define EnMBID						BIT(24)
++#define APP_BASSN					BIT(27)
++#define APP_PHYSTS					BIT(28)
++#define APP_ICV						BIT(29)
++#define APP_MIC						BIT(30)
++#define APP_FCS						BIT(31)
++
++//2 RX_PKT_LIMIT
++
++//2 RX_DLK_TIME
++
++//2 MBIDCAMCFG
++
++
++
++//2 AMPDU_MIN_SPACE
++#define _MIN_SPACE(x)				((x) & 0x7)
++#define _SHORT_GI_PADDING(x)		(((x) & 0x1F) << 3)
++
++
++//2 RXERR_RPT
++#define RXERR_TYPE_OFDM_PPDU			0
++#define RXERR_TYPE_OFDM_FALSE_ALARM	1
++#define RXERR_TYPE_OFDM_MPDU_OK		2
++#define RXERR_TYPE_OFDM_MPDU_FAIL	3
++#define RXERR_TYPE_CCK_PPDU			4
++#define RXERR_TYPE_CCK_FALSE_ALARM	5
++#define RXERR_TYPE_CCK_MPDU_OK		6
++#define RXERR_TYPE_CCK_MPDU_FAIL		7
++#define RXERR_TYPE_HT_PPDU				8
++#define RXERR_TYPE_HT_FALSE_ALARM	9
++#define RXERR_TYPE_HT_MPDU_TOTAL		10
++#define RXERR_TYPE_HT_MPDU_OK			11
++#define RXERR_TYPE_HT_MPDU_FAIL		12
++#define RXERR_TYPE_RX_FULL_DROP		15
++
++#define RXERR_COUNTER_MASK			0xFFFFF
++#define RXERR_RPT_RST					BIT(27)
++#define _RXERR_RPT_SEL(type)			((type) << 28)
++
++
++//2 SECCFG
++#define	SCR_TxUseDK					BIT(0)			//Force Tx Use Default Key
++#define	SCR_RxUseDK					BIT(1)			//Force Rx Use Default Key
++#define	SCR_TxEncEnable				BIT(2)			//Enable Tx Encryption
++#define	SCR_RxDecEnable				BIT(3)			//Enable Rx Decryption
++#define	SCR_SKByA2						BIT(4)			//Search kEY BY A2
++#define	SCR_NoSKMC						BIT(5)			//No Key Search Multicast
++#define 	SCR_TXBCUSEDK					BIT(6)			// Force Tx Broadcast packets Use Default Key
++#define 	SCR_RXBCUSEDK					BIT(7)			// Force Rx Broadcast packets Use Default Key
++
++//vivi added for new cam search flow, 20091028
++#ifdef HW_EN_DE_CRYPTION_FOR_NEW_CAM_SEARCH_FLOW
++#define	SCR_TxUseBroadcastDK			BIT6			//Force Tx Use Broadcast Default Key
++#define	SCR_RxUseBroadcastDK			BIT7			//Force Rx Use Broadcast Default Key
++#endif
++
++
++//-----------------------------------------------------
++//
++//	0xFE00h ~ 0xFE55h	USB Configuration
++//
++//-----------------------------------------------------
++
++//2 USB Information (0xFE17)
++#define USB_IS_HIGH_SPEED				0
++#define USB_IS_FULL_SPEED				1
++#define USB_SPEED_MASK					BIT(5)
++
++#define USB_NORMAL_SIE_EP_MASK		0xF
++#define USB_NORMAL_SIE_EP_SHIFT		4
++
++#define USB_TEST_EP_MASK				0x30
++#define USB_TEST_EP_SHIFT				4
++
++//2 Special Option
++#define USB_AGG_EN						BIT(3)
++
++
++//2REG_C2HEVT_CLEAR
++#define C2H_EVT_HOST_CLOSE				0x00	// Set by driver and notify FW that the driver has read the C2H command message
++#define C2H_EVT_FW_CLOSE				0xFF	// Set by FW indicating that FW had set the C2H command message and it's not yet read by driver.
++
++//2 8192D PartNo.
++#define		PARTNO_92D_NIC			(BIT7|BIT6)
++#define		PARTNO_92D_NIC_REMARK (BIT5|BIT4)
++#define		PARTNO_SINGLE_BAND_VS  BIT3
++#define		PARTNO_SINGLE_BAND_VS_REMARK BIT1
++#define		PARTNO_CONCURRENT_BAND_VC (BIT3|BIT2)
++#define		PARTNO_CONCURRENT_BAND_VC_REMARK (BIT1|BIT0)
++//========================================================
++// General definitions
++//========================================================
++
++#define MAC_ADDR_LEN						6
++#define LAST_ENTRY_OF_TX_PKT_BUFFER		255
++#define LAST_ENTRY_OF_TX_PKT_BUFFER_DUAL_MAC	127
++
++#define POLLING_LLT_THRESHOLD				20
++#define POLLING_READY_TIMEOUT_COUNT		1000
++
++// Min Spacing related settings.
++#define	MAX_MSS_DENSITY_2T				0x13
++#define	MAX_MSS_DENSITY_1T				0x0A
++// GPIO BIT
++#define	HAL_8192C_HW_GPIO_WPS_BIT		BIT2
++
++
++#include "basic_types.h"
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192d_xmit.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192d_xmit.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtl8192d_xmit.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtl8192d_xmit.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,145 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef _RTL8192D_XMIT_H_
++#define _RTL8192D_XMIT_H_
++
++//
++// Queue Select Value in TxDesc
++//
++#define QSLT_BK							0x2//0x01
++#define QSLT_BE							0x0
++#define QSLT_VI							0x5//0x4
++#define QSLT_VO							0x7//0x6
++#define QSLT_BEACON						0x10
++#define QSLT_HIGH						0x11
++#define QSLT_MGNT						0x12
++#define QSLT_CMD						0x13
++
++//Because we open EM for normal case, we just always insert 2*8 bytes.by wl
++#define USB_92D_DUMMY_OFFSET		2
++#define USB_92D_DUMMY_LENGTH		(USB_92D_DUMMY_OFFSET * PACKET_OFFSET_SZ)
++#define USB_HWDESC_HEADER_LEN	(TXDESC_SIZE + USB_92D_DUMMY_LENGTH)
++
++//For 92D early mode
++#define SET_EARLYMODE_PKTNUM(__pAddr, __Value) SET_BITS_TO_LE_4BYTE(__pAddr, 0, 3, __Value)
++#define SET_EARLYMODE_LEN0(__pAddr, __Value) SET_BITS_TO_LE_4BYTE(__pAddr, 4, 12, __Value)
++#define SET_EARLYMODE_LEN1(__pAddr, __Value) SET_BITS_TO_LE_4BYTE(__pAddr, 16, 12, __Value)
++#define SET_EARLYMODE_LEN2_1(__pAddr, __Value) SET_BITS_TO_LE_4BYTE(__pAddr, 28, 4, __Value)
++#define SET_EARLYMODE_LEN2_2(__pAddr, __Value) SET_BITS_TO_LE_4BYTE(__pAddr+4, 0, 8, __Value)
++#define SET_EARLYMODE_LEN3(__pAddr, __Value) SET_BITS_TO_LE_4BYTE(__pAddr+4, 8, 12, __Value)
++#define SET_EARLYMODE_LEN4(__pAddr, __Value) SET_BITS_TO_LE_4BYTE(__pAddr+4, 20, 12, __Value)
++
++/* Copy from rtl8192c */
++struct txrpt_ccx_8192d {
++	/* offset 0 */
++	u8 retry_cnt:6;
++	u8 rsvd_0:2;
++
++	/* offset 1 */
++	u8 rts_retry_cnt:6;
++	u8 rsvd_1:2;
++
++	/* offset 2 */
++	u8 ccx_qtime0;
++	u8 ccx_qtime1;
++
++	/* offset 4 */
++	u8 missed_pkt_num:5;
++	u8 rsvd_4:3;
++
++	/* offset 5 */
++	u8 mac_id:5;
++	u8 des1_fragssn:3;
++
++	/* offset 6 */
++	u8 rpt_pkt_num:5;
++	u8 pkt_drop:1;
++	u8 lifetime_over:1;
++	u8 retry_over:1;
++
++	/* offset 7*/
++	u8 edca_tx_queue:4;
++	u8 rsvd_7:1;
++	u8 bmc:1;
++	u8 pkt_ok:1;
++	u8 int_ccx:1;
++};
++
++#define txrpt_ccx_qtime_8192d(txrpt_ccx) ((txrpt_ccx)->ccx_qtime0+((txrpt_ccx)->ccx_qtime1<<8))
++
++#ifdef CONFIG_XMIT_ACK
++void dump_txrpt_ccx_8192d(void *buf);
++void handle_txrpt_ccx_8192d(_adapter *adapter, void *buf);
++#else
++#define dump_txrpt_ccx_8192d(buf) do {} while(0)
++#define handle_txrpt_ccx_8192d(adapter, buf) do {} while(0)
++#endif
++
++#ifdef CONFIG_USB_HCI
++
++#ifdef CONFIG_USB_TX_AGGREGATION
++#define MAX_TX_AGG_PACKET_NUMBER 0xFF
++#endif
++
++s32	rtl8192du_init_xmit_priv(_adapter * padapter);
++
++void	rtl8192du_free_xmit_priv(_adapter * padapter);
++
++void rtl8192du_cal_txdesc_chksum(struct tx_desc	*ptxdesc);
++
++s32 rtl8192du_xmitframe_complete(_adapter *padapter, struct xmit_priv *pxmitpriv, struct xmit_buf *pxmitbuf);
++
++s32 rtl8192du_mgnt_xmit(_adapter *padapter, struct xmit_frame *pmgntframe);
++
++s32 rtl8192du_hal_xmit(_adapter *padapter, struct xmit_frame *pxmitframe);
++
++s32	 rtl8192du_hal_xmitframe_enqueue(_adapter *padapter, struct xmit_frame *pxmitframe);
++
++
++#ifdef CONFIG_HOSTAPD_MLME
++s32	rtl8192du_hostap_mgnt_xmit_entry(_adapter *padapter, _pkt *pkt);
++#endif
++
++#endif
++
++#ifdef CONFIG_PCI_HCI
++s32	rtl8192de_init_xmit_priv(_adapter * padapter);
++void	rtl8192de_free_xmit_priv(_adapter * padapter);
++
++s32	rtl8192de_enqueue_xmitbuf(struct rtw_tx_ring *ring, struct xmit_buf *pxmitbuf);
++struct xmit_buf *rtl8192de_dequeue_xmitbuf(struct rtw_tx_ring *ring);
++
++void	rtl8192de_xmitframe_resume(_adapter *padapter);
++
++s32	rtl8192de_mgnt_xmit(_adapter *padapter, struct xmit_frame *pmgntframe);
++
++s32	rtl8192de_hal_xmit(_adapter *padapter, struct xmit_frame *pxmitframe);
++
++s32	 rtl8192de_hal_xmitframe_enqueue(_adapter *padapter, struct xmit_frame *pxmitframe);
++
++#ifdef CONFIG_HOSTAPD_MLME
++s32	rtl8192de_hostap_mgnt_xmit_entry(_adapter *padapter, _pkt *pkt);
++#endif
++
++#endif
++
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_android.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_android.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_android.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_android.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,90 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++ 
++#ifndef __RTW_ANDROID_H__
++#define __RTW_ANDROID_H__
++
++#include <linux/module.h>
++#include <linux/netdevice.h>
++
++enum ANDROID_WIFI_CMD {
++	ANDROID_WIFI_CMD_START,				
++	ANDROID_WIFI_CMD_STOP,			
++	ANDROID_WIFI_CMD_SCAN_ACTIVE,
++	ANDROID_WIFI_CMD_SCAN_PASSIVE,		
++	ANDROID_WIFI_CMD_RSSI,	
++	ANDROID_WIFI_CMD_LINKSPEED,
++	ANDROID_WIFI_CMD_RXFILTER_START,
++	ANDROID_WIFI_CMD_RXFILTER_STOP,	
++	ANDROID_WIFI_CMD_RXFILTER_ADD,	
++	ANDROID_WIFI_CMD_RXFILTER_REMOVE,
++	ANDROID_WIFI_CMD_BTCOEXSCAN_START,
++	ANDROID_WIFI_CMD_BTCOEXSCAN_STOP,
++	ANDROID_WIFI_CMD_BTCOEXMODE,
++	ANDROID_WIFI_CMD_SETSUSPENDOPT,
++	ANDROID_WIFI_CMD_P2P_DEV_ADDR,	
++	ANDROID_WIFI_CMD_SETFWPATH,		
++	ANDROID_WIFI_CMD_SETBAND,		
++	ANDROID_WIFI_CMD_GETBAND,			
++	ANDROID_WIFI_CMD_COUNTRY,			
++	ANDROID_WIFI_CMD_P2P_SET_NOA,
++	ANDROID_WIFI_CMD_P2P_GET_NOA,	
++	ANDROID_WIFI_CMD_P2P_SET_PS,	
++	ANDROID_WIFI_CMD_SET_AP_WPS_P2P_IE,
++#ifdef PNO_SUPPORT
++	ANDROID_WIFI_CMD_PNOSSIDCLR_SET,
++	ANDROID_WIFI_CMD_PNOSETUP_SET,
++	ANDROID_WIFI_CMD_PNOENABLE_SET,
++	ANDROID_WIFI_CMD_PNODEBUG_SET,
++#endif
++
++	ANDROID_WIFI_CMD_MACADDR,
++
++	ANDROID_WIFI_CMD_BLOCK,
++
++	ANDROID_WIFI_CMD_WFD_ENABLE,
++	ANDROID_WIFI_CMD_WFD_DISABLE,
++	
++	ANDROID_WIFI_CMD_WFD_SET_TCPPORT,
++	ANDROID_WIFI_CMD_WFD_SET_MAX_TPUT,
++	ANDROID_WIFI_CMD_WFD_SET_DEVTYPE,
++
++	ANDROID_WIFI_CMD_MAX
++};
++
++int rtw_android_cmdstr_to_num(char *cmdstr);
++int rtw_android_priv_cmd(struct net_device *net, struct ifreq *ifr, int cmd);
++
++#if defined(RTW_ENABLE_WIFI_CONTROL_FUNC)
++int rtw_android_wifictrl_func_add(void);
++void rtw_android_wifictrl_func_del(void);
++void* wl_android_prealloc(int section, unsigned long size);
++
++int wifi_get_irq_number(unsigned long *irq_flags_ptr);
++int wifi_set_power(int on, unsigned long msec);
++int wifi_get_mac_addr(unsigned char *buf);
++void *wifi_get_country_code(char *ccode);
++#else
++static int rtw_android_wifictrl_func_add(void) { return 0; }
++static void rtw_android_wifictrl_func_del(void) {}
++#endif /* defined(RTW_ENABLE_WIFI_CONTROL_FUNC) */
++
++#endif //__RTW_ANDROID_H__
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_ap.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_ap.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_ap.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_ap.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,64 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __RTW_AP_H_
++#define __RTW_AP_H_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++
++
++#ifdef CONFIG_AP_MODE
++
++//external function
++extern void rtw_indicate_sta_assoc_event(_adapter *padapter, struct sta_info *psta);
++extern void rtw_indicate_sta_disassoc_event(_adapter *padapter, struct sta_info *psta);
++
++
++void init_mlme_ap_info(_adapter *padapter);
++void free_mlme_ap_info(_adapter *padapter);
++//void update_BCNTIM(_adapter *padapter);
++void rtw_add_bcn_ie(_adapter *padapter, WLAN_BSSID_EX *pnetwork, u8 index, u8 *data, u8 len);
++void rtw_remove_bcn_ie(_adapter *padapter, WLAN_BSSID_EX *pnetwork, u8 index);
++void update_beacon(_adapter *padapter, u8 ie_id, u8 *oui, u8 tx);
++void expire_timeout_chk(_adapter *padapter);	
++void update_sta_info_apmode(_adapter *padapter, struct sta_info *psta);
++int rtw_check_beacon_data(_adapter *padapter, u8 *pbuf,  int len);
++void rtw_ap_restore_network(_adapter *padapter);
++void rtw_set_macaddr_acl(_adapter *padapter, int mode);
++int rtw_acl_add_sta(_adapter *padapter, u8 *addr);
++int rtw_acl_remove_sta(_adapter *padapter, u8 *addr);
++
++#ifdef CONFIG_NATIVEAP_MLME
++void associated_clients_update(_adapter *padapter, u8 updated);
++void bss_cap_update_on_sta_join(_adapter *padapter, struct sta_info *psta);
++u8 bss_cap_update_on_sta_leave(_adapter *padapter, struct sta_info *psta);
++void sta_info_update(_adapter *padapter, struct sta_info *psta);
++void ap_sta_info_defer_update(_adapter *padapter, struct sta_info *psta);
++u8 ap_free_sta(_adapter *padapter, struct sta_info *psta, bool active, u16 reason);
++int rtw_sta_flush(_adapter *padapter);
++int rtw_ap_inform_ch_switch(_adapter *padapter, u8 new_ch, u8 ch_offset);
++void start_ap_mode(_adapter *padapter);
++void stop_ap_mode(_adapter *padapter);
++#endif
++#endif //end of CONFIG_AP_MODE
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_br_ext.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_br_ext.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_br_ext.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_br_ext.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,76 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef _RTW_BR_EXT_H_
++#define _RTW_BR_EXT_H_
++
++#if 1	// rtw_wifi_driver
++#define CL_IPV6_PASS    	1
++#define MACADDRLEN		6
++#define _DEBUG_ERR		printk
++#define _DEBUG_INFO		//printk
++#define DEBUG_WARN		printk
++#define DEBUG_INFO		//printk
++#define DEBUG_ERR		printk
++//#define GET_MY_HWADDR		((GET_MIB(priv))->dot11OperationEntry.hwaddr)
++#define GET_MY_HWADDR(padapter)		((padapter)->eeprompriv.mac_addr)
++#endif	// rtw_wifi_driver
++
++#define NAT25_HASH_BITS		4
++#define NAT25_HASH_SIZE		(1 << NAT25_HASH_BITS)
++#define NAT25_AGEING_TIME	300
++
++#ifdef CL_IPV6_PASS
++#define MAX_NETWORK_ADDR_LEN	17
++#else
++#define MAX_NETWORK_ADDR_LEN	11
++#endif
++
++struct nat25_network_db_entry
++{
++	struct nat25_network_db_entry	*next_hash;
++	struct nat25_network_db_entry	**pprev_hash;
++	atomic_t						use_count;
++	unsigned char					macAddr[6];
++	unsigned long					ageing_timer;
++	unsigned char    				networkAddr[MAX_NETWORK_ADDR_LEN];
++};
++
++enum NAT25_METHOD {
++	NAT25_MIN,
++	NAT25_CHECK,
++	NAT25_INSERT,
++	NAT25_LOOKUP,
++	NAT25_PARSE,
++	NAT25_MAX
++};
++
++struct br_ext_info {
++	unsigned int	nat25_disable;
++	unsigned int	macclone_enable;
++	unsigned int	dhcp_bcst_disable;
++	int		addPPPoETag;		// 1: Add PPPoE relay-SID, 0: disable
++	unsigned char	nat25_dmzMac[MACADDRLEN];
++	unsigned int	nat25sc_disable;
++};
++
++void nat25_db_cleanup(_adapter *priv);
++
++#endif // _RTW_BR_EXT_H_
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_byteorder.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_byteorder.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_byteorder.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_byteorder.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,40 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef _RTL871X_BYTEORDER_H_
++#define _RTL871X_BYTEORDER_H_
++
++#include <drv_conf.h>
++
++#if defined (CONFIG_LITTLE_ENDIAN) && defined (CONFIG_BIG_ENDIAN)
++#error "Shall be CONFIG_LITTLE_ENDIAN or CONFIG_BIG_ENDIAN, but not both!\n"
++#endif
++
++#if defined (CONFIG_LITTLE_ENDIAN)
++#ifndef CONFIG_PLATFORM_MSTAR389
++#  include <byteorder/little_endian.h>
++#endif
++#elif defined (CONFIG_BIG_ENDIAN)
++#  include <byteorder/big_endian.h>
++#else
++#  error "Must be LITTLE/BIG Endian Host"
++#endif
++
++#endif /* _RTL871X_BYTEORDER_H_ */
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_cmd.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_cmd.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_cmd.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_cmd.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,1167 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __RTW_CMD_H_
++#define __RTW_CMD_H_
++
++#include <drv_conf.h>
++#include <wlan_bssdef.h>
++#include <rtw_rf.h>
++#include <rtw_led.h>
++
++#define C2H_MEM_SZ (16*1024)
++
++#ifndef CONFIG_RTL8711FW
++
++	#include <osdep_service.h>
++	#include <ieee80211.h> // <ieee80211/ieee80211.h>
++
++
++	#define FREE_CMDOBJ_SZ	128
++	
++	#define MAX_CMDSZ	1024
++	#define MAX_RSPSZ	512
++	#define MAX_EVTSZ	1024
++
++#ifdef PLATFORM_OS_CE
++	#define CMDBUFF_ALIGN_SZ 4
++#else
++	#define CMDBUFF_ALIGN_SZ 512
++#endif
++
++	struct cmd_obj {
++		_adapter *padapter;
++		u16	cmdcode;
++		u8	res;
++		u8	*parmbuf;
++		u32	cmdsz;
++		u8	*rsp;
++		u32	rspsz;
++		//_sema 	cmd_sem;
++		_list	list;
++	};
++
++	struct cmd_priv {
++		_sema	cmd_queue_sema;
++		//_sema	cmd_done_sema;
++		_sema	terminate_cmdthread_sema;		
++		_queue	cmd_queue;
++		u8	cmd_seq;
++		u8	*cmd_buf;	//shall be non-paged, and 4 bytes aligned
++		u8	*cmd_allocated_buf;
++		u8	*rsp_buf;	//shall be non-paged, and 4 bytes aligned		
++		u8	*rsp_allocated_buf;
++		u32	cmd_issued_cnt;
++		u32	cmd_done_cnt;
++		u32	rsp_cnt;
++		u8 cmdthd_running;
++		u8 stop_req;
++		_adapter *padapter;
++	};
++
++#ifdef CONFIG_EVENT_THREAD_MODE
++	struct evt_obj {
++		u16	evtcode;
++		u8	res;
++		u8	*parmbuf;
++		u32	evtsz;		
++		_list	list;
++	};
++#endif
++
++	struct	evt_priv {
++#ifdef CONFIG_EVENT_THREAD_MODE
++		_sema	evt_notify;
++		_sema	terminate_evtthread_sema;
++		_queue	evt_queue;
++#endif
++
++//#define CONFIG_C2H_WK
++#ifdef CONFIG_C2H_WK
++		_workitem c2h_wk;
++		bool c2h_wk_alive;
++		struct rtw_cbuf *c2h_queue;
++		#define C2H_QUEUE_MAX_LEN 10
++#endif
++		
++#ifdef CONFIG_H2CLBK
++		_sema	lbkevt_done;
++		u8	lbkevt_limit;
++		u8	lbkevt_num;
++		u8	*cmdevt_parm;		
++#endif
++		ATOMIC_T event_seq;
++		u8	*evt_buf;	//shall be non-paged, and 4 bytes aligned		
++		u8	*evt_allocated_buf;
++		u32	evt_done_cnt;
++#ifdef CONFIG_SDIO_HCI
++		u8	*c2h_mem;
++		u8	*allocated_c2h_mem;
++#ifdef PLATFORM_OS_XP
++		PMDL	pc2h_mdl;
++#endif
++#endif
++
++	};
++
++#define init_h2fwcmd_w_parm_no_rsp(pcmd, pparm, code) \
++do {\
++	_rtw_init_listhead(&pcmd->list);\
++	pcmd->cmdcode = code;\
++	pcmd->parmbuf = (u8 *)(pparm);\
++	pcmd->cmdsz = sizeof (*pparm);\
++	pcmd->rsp = NULL;\
++	pcmd->rspsz = 0;\
++} while(0)
++
++struct c2h_evt_hdr {
++	u8 id:4;
++	u8 plen:4;
++	u8 seq;
++	u8 payload[0];
++};
++
++#define c2h_evt_exist(c2h_evt) ((c2h_evt)->id || (c2h_evt)->plen)
++
++extern u32 rtw_enqueue_cmd(struct cmd_priv *pcmdpriv, struct cmd_obj *obj);
++extern struct cmd_obj *rtw_dequeue_cmd(struct cmd_priv *pcmdpriv);
++extern void rtw_free_cmd_obj(struct cmd_obj *pcmd);
++
++#ifdef CONFIG_EVENT_THREAD_MODE
++extern u32 rtw_enqueue_evt(struct evt_priv *pevtpriv, struct evt_obj *obj);
++extern struct evt_obj *rtw_dequeue_evt(_queue *queue);
++extern void rtw_free_evt_obj(struct evt_obj *pcmd);
++#endif
++
++void rtw_stop_cmd_thread(_adapter *adapter);
++thread_return rtw_cmd_thread(thread_context context);
++
++extern u32 rtw_init_cmd_priv (struct cmd_priv *pcmdpriv);
++extern void rtw_free_cmd_priv (struct cmd_priv *pcmdpriv);
++
++extern u32 rtw_init_evt_priv (struct evt_priv *pevtpriv);
++extern void rtw_free_evt_priv (struct evt_priv *pevtpriv);
++extern void rtw_cmd_clr_isr(struct cmd_priv *pcmdpriv);
++extern void rtw_evt_notify_isr(struct evt_priv *pevtpriv);
++#ifdef CONFIG_P2P
++u8 p2p_protocol_wk_cmd(_adapter*padapter, int intCmdType );
++#endif //CONFIG_P2P
++
++#else
++	#include <ieee80211.h>
++#endif	/* CONFIG_RTL8711FW */
++
++enum rtw_drvextra_cmd_id
++{	
++	NONE_WK_CID,
++	DYNAMIC_CHK_WK_CID,
++	DM_CTRL_WK_CID,
++	PBC_POLLING_WK_CID,
++	POWER_SAVING_CTRL_WK_CID,//IPS,AUTOSuspend
++	LPS_CTRL_WK_CID,
++	ANT_SELECT_WK_CID,
++	P2P_PS_WK_CID,
++	P2P_PROTO_WK_CID,
++	CHECK_HIQ_WK_CID,//for softap mode, check hi queue if empty
++	INTEl_WIDI_WK_CID,
++	C2H_WK_CID,
++	RESET_SECURITYPRIV, // add for CONFIG_IEEE80211W, none 11w also can use
++	FREE_ASSOC_RESOURCES, // add for CONFIG_IEEE80211W, none 11w also can use
++	MAX_WK_CID
++};
++
++enum LPS_CTRL_TYPE
++{
++	LPS_CTRL_SCAN=0,
++	LPS_CTRL_JOINBSS=1,
++	LPS_CTRL_CONNECT=2,
++	LPS_CTRL_DISCONNECT=3,
++	LPS_CTRL_SPECIAL_PACKET=4,
++};
++
++enum RFINTFS {
++	SWSI,
++	HWSI,
++	HWPI,
++};
++
++/*
++Caller Mode: Infra, Ad-HoC(C)
++
++Notes: To enter USB suspend mode
++
++Command Mode
++
++*/
++struct usb_suspend_parm {
++	u32 action;// 1: sleep, 0:resume
++};
++
++/*
++Caller Mode: Infra, Ad-HoC
++
++Notes: To join a known BSS.
++
++Command-Event Mode
++
++*/
++
++/*
++Caller Mode: Infra, Ad-Hoc
++
++Notes: To join the specified bss
++
++Command Event Mode
++
++*/
++struct joinbss_parm {
++	WLAN_BSSID_EX network;
++};
++
++/*
++Caller Mode: Infra, Ad-HoC(C)
++
++Notes: To disconnect the current associated BSS
++
++Command Mode
++
++*/
++struct disconnect_parm {
++	u32 deauth_timeout_ms;
++};
++
++/*
++Caller Mode: AP, Ad-HoC(M)
++
++Notes: To create a BSS
++
++Command Mode
++*/
++struct createbss_parm {
++	WLAN_BSSID_EX network;
++};
++
++/*
++Caller Mode: AP, Ad-HoC, Infra
++
++Notes: To set the NIC mode of RTL8711
++
++Command Mode
++
++The definition of mode:
++
++#define IW_MODE_AUTO	0	// Let the driver decides which AP to join
++#define IW_MODE_ADHOC	1	// Single cell network (Ad-Hoc Clients)
++#define IW_MODE_INFRA	2	// Multi cell network, roaming, ..
++#define IW_MODE_MASTER	3	// Synchronisation master or Access Point
++#define IW_MODE_REPEAT	4	// Wireless Repeater (forwarder)
++#define IW_MODE_SECOND	5	// Secondary master/repeater (backup)
++#define IW_MODE_MONITOR	6	// Passive monitor (listen only)
++
++*/
++struct	setopmode_parm {
++	u8	mode;
++	u8	rsvd[3];
++};
++
++/*
++Caller Mode: AP, Ad-HoC, Infra
++
++Notes: To ask RTL8711 performing site-survey
++
++Command-Event Mode 
++
++*/
++
++#define RTW_SSID_SCAN_AMOUNT 9 // for WEXT_CSCAN_AMOUNT 9
++#define RTW_CHANNEL_SCAN_AMOUNT (14+37)
++struct sitesurvey_parm {
++	sint scan_mode;	//active: 1, passive: 0 
++	/* sint bsslimit;	// 1 ~ 48 */
++	u8 ssid_num;
++	u8 ch_num;
++	NDIS_802_11_SSID ssid[RTW_SSID_SCAN_AMOUNT];
++	struct rtw_ieee80211_channel ch[RTW_CHANNEL_SCAN_AMOUNT];
++};
++
++/*
++Caller Mode: Any
++
++Notes: To set the auth type of RTL8711. open/shared/802.1x
++
++Command Mode
++
++*/
++struct setauth_parm {
++	u8 mode;  //0: legacy open, 1: legacy shared 2: 802.1x
++	u8 _1x;   //0: PSK, 1: TLS
++	u8 rsvd[2];
++};
++
++/*
++Caller Mode: Infra
++
++a. algorithm: wep40, wep104, tkip & aes
++b. keytype: grp key/unicast key
++c. key contents
++
++when shared key ==> keyid is the camid
++when 802.1x ==> keyid [0:1] ==> grp key
++when 802.1x ==> keyid > 2 ==> unicast key
++
++*/
++struct setkey_parm {
++	u8	algorithm;	// encryption algorithm, could be none, wep40, TKIP, CCMP, wep104
++	u8	keyid;		
++	u8 	grpkey;		// 1: this is the grpkey for 802.1x. 0: this is the unicast key for 802.1x
++	u8 	set_tx;		// 1: main tx key for wep. 0: other key.
++	u8	key[16];	// this could be 40 or 104
++};
++
++/*
++When in AP or Ad-Hoc mode, this is used to 
++allocate an sw/hw entry for a newly associated sta.
++
++Command
++
++when shared key ==> algorithm/keyid 
++
++*/
++struct set_stakey_parm {
++	u8	addr[ETH_ALEN];
++	u8	algorithm;
++	u8 	id;// currently for erasing cam entry if algorithm == _NO_PRIVACY_ 
++	u8	key[16];
++};
++
++struct set_stakey_rsp {
++	u8	addr[ETH_ALEN];
++	u8	keyid;
++	u8	rsvd;
++};
++
++/*
++Caller Ad-Hoc/AP
++
++Command -Rsp(AID == CAMID) mode
++
++This is to force fw to add an sta_data entry per driver's request.
++
++FW will write an cam entry associated with it.
++
++*/
++struct set_assocsta_parm {
++	u8	addr[ETH_ALEN];
++};
++
++struct set_assocsta_rsp {
++	u8	cam_id;
++	u8	rsvd[3];
++};
++
++/*
++	Caller Ad-Hoc/AP
++	
++	Command mode
++	
++	This is to force fw to del an sta_data entry per driver's request
++	
++	FW will invalidate the cam entry associated with it.
++
++*/
++struct del_assocsta_parm {
++	u8  	addr[ETH_ALEN];
++};
++
++/*
++Caller Mode: AP/Ad-HoC(M)
++
++Notes: To notify fw that given staid has changed its power state
++
++Command Mode
++
++*/
++struct setstapwrstate_parm {
++	u8	staid;
++	u8	status;
++	u8	hwaddr[6];
++};
++
++/*
++Caller Mode: Any
++
++Notes: To setup the basic rate of RTL8711
++
++Command Mode
++
++*/
++struct	setbasicrate_parm {
++	u8	basicrates[NumRates];
++};
++
++/*
++Caller Mode: Any
++
++Notes: To read the current basic rate
++
++Command-Rsp Mode
++
++*/
++struct getbasicrate_parm {
++	u32 rsvd;
++};
++
++struct getbasicrate_rsp {
++	u8 basicrates[NumRates];
++};
++
++/*
++Caller Mode: Any
++
++Notes: To setup the data rate of RTL8711
++
++Command Mode
++
++*/
++struct setdatarate_parm {
++#ifdef MP_FIRMWARE_OFFLOAD
++	u32	curr_rateidx;
++#else
++	u8	mac_id;
++	u8	datarates[NumRates];
++#endif
++};
++
++/*
++Caller Mode: Any
++
++Notes: To read the current data rate
++
++Command-Rsp Mode
++
++*/
++struct getdatarate_parm {
++	u32 rsvd;
++	
++};
++struct getdatarate_rsp {
++	u8 datarates[NumRates];
++};
++
++
++/*
++Caller Mode: Any
++AP: AP can use the info for the contents of beacon frame
++Infra: STA can use the info when sitesurveying
++Ad-HoC(M): Like AP
++Ad-HoC(C): Like STA
++
++
++Notes: To set the phy capability of the NIC
++
++Command Mode
++
++*/
++
++struct	setphyinfo_parm {
++	struct regulatory_class class_sets[NUM_REGULATORYS];
++	u8	status;
++};
++
++struct	getphyinfo_parm {
++	u32 rsvd;
++};
++
++struct	getphyinfo_rsp {
++	struct regulatory_class class_sets[NUM_REGULATORYS];
++	u8	status;
++};
++
++/*
++Caller Mode: Any
++
++Notes: To set the channel/modem/band
++This command will be used when channel/modem/band is changed.
++
++Command Mode
++
++*/
++struct	setphy_parm {
++	u8	rfchannel;
++	u8	modem;
++};
++
++/*
++Caller Mode: Any
++
++Notes: To get the current setting of channel/modem/band
++
++Command-Rsp Mode
++
++*/
++struct	getphy_parm {
++	u32 rsvd;
++
++};
++struct	getphy_rsp {
++	u8	rfchannel;
++	u8	modem;
++};
++
++struct readBB_parm {
++	u8	offset;
++};
++struct readBB_rsp {
++	u8	value;
++};
++
++struct readTSSI_parm {
++	u8	offset;
++};
++struct readTSSI_rsp {
++	u8	value;
++};
++
++struct writeBB_parm {
++	u8	offset;
++	u8	value;
++};
++
++struct readRF_parm {
++	u8	offset;
++};
++struct readRF_rsp {
++	u32	value;
++};
++
++struct writeRF_parm {
++	u32	offset;
++	u32	value;
++};
++
++struct getrfintfs_parm {
++	u8	rfintfs;
++};
++
++
++struct Tx_Beacon_param
++{
++	WLAN_BSSID_EX network;
++};
++
++/*
++	Notes: This command is used for H2C/C2H loopback testing
++
++	mac[0] == 0 
++	==> CMD mode, return H2C_SUCCESS.
++	The following condition must be ture under CMD mode
++		mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0;
++		s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7;
++		s2 == (b1 << 8 | b0);
++	
++	mac[0] == 1
++	==> CMD_RSP mode, return H2C_SUCCESS_RSP
++	
++	The rsp layout shall be:
++	rsp: 			parm:
++		mac[0]  =   mac[5];
++		mac[1]  =   mac[4];
++		mac[2]  =   mac[3];
++		mac[3]  =   mac[2];
++		mac[4]  =   mac[1];
++		mac[5]  =   mac[0];
++		s0		=   s1;
++		s1		=   swap16(s0);
++		w0		=  	swap32(w1);
++		b0		= 	b1
++		s2		= 	s0 + s1
++		b1		= 	b0
++		w1		=	w0
++		
++	mac[0] == 	2
++	==> CMD_EVENT mode, return 	H2C_SUCCESS
++	The event layout shall be:
++	event:			parm:
++		mac[0]  =   mac[5];
++		mac[1]  =   mac[4];
++		mac[2]  =   event's sequence number, starting from 1 to parm's marc[3]
++		mac[3]  =   mac[2];
++		mac[4]  =   mac[1];
++		mac[5]  =   mac[0];
++		s0		=   swap16(s0) - event.mac[2];
++		s1		=   s1 + event.mac[2];
++		w0		=  	swap32(w0);
++		b0		= 	b1
++		s2		= 	s0 + event.mac[2]
++		b1		= 	b0 
++		w1		=	swap32(w1) - event.mac[2];	
++	
++		parm->mac[3] is the total event counts that host requested.
++		
++	
++	event will be the same with the cmd's param.
++		
++*/
++
++#ifdef CONFIG_H2CLBK
++
++struct seth2clbk_parm {
++	u8 mac[6];
++	u16	s0;
++	u16	s1;
++	u32	w0;
++	u8	b0;
++	u16  s2;
++	u8	b1;
++	u32	w1;
++};
++
++struct geth2clbk_parm {
++	u32 rsv;	
++};
++
++struct geth2clbk_rsp {
++	u8	mac[6];
++	u16	s0;
++	u16	s1;
++	u32	w0;
++	u8	b0;
++	u16	s2;
++	u8	b1;
++	u32	w1;
++};
++
++#endif	/* CONFIG_H2CLBK */
++
++// CMD param Formart for driver extra cmd handler
++struct drvextra_cmd_parm {
++	int ec_id; //extra cmd id
++	int type_size; // Can use this field as the type id or command size
++	unsigned char *pbuf;
++};
++
++/*------------------- Below are used for RF/BB tunning ---------------------*/
++
++struct	setantenna_parm {
++	u8	tx_antset;		
++	u8	rx_antset;
++	u8	tx_antenna;		
++	u8	rx_antenna;		
++};
++
++struct	enrateadaptive_parm {
++	u32	en;
++};
++
++struct settxagctbl_parm {
++	u32	txagc[MAX_RATES_LENGTH];
++};
++
++struct gettxagctbl_parm {
++	u32 rsvd;
++};
++struct gettxagctbl_rsp {
++	u32	txagc[MAX_RATES_LENGTH];
++};
++
++struct setagcctrl_parm {
++	u32	agcctrl;		// 0: pure hw, 1: fw
++};
++
++
++struct setssup_parm	{
++	u32	ss_ForceUp[MAX_RATES_LENGTH];
++};
++
++struct getssup_parm	{
++	u32 rsvd;
++};
++struct getssup_rsp	{
++	u8	ss_ForceUp[MAX_RATES_LENGTH];
++};
++
++
++struct setssdlevel_parm	{
++	u8	ss_DLevel[MAX_RATES_LENGTH];
++};
++
++struct getssdlevel_parm	{
++	u32 rsvd;
++};
++struct getssdlevel_rsp	{
++	u8	ss_DLevel[MAX_RATES_LENGTH];
++};
++
++struct setssulevel_parm	{
++	u8	ss_ULevel[MAX_RATES_LENGTH];
++};
++
++struct getssulevel_parm	{
++	u32 rsvd;
++};
++struct getssulevel_rsp	{
++	u8	ss_ULevel[MAX_RATES_LENGTH];
++};
++
++
++struct	setcountjudge_parm {
++	u8	count_judge[MAX_RATES_LENGTH];
++};
++
++struct	getcountjudge_parm {
++	u32 rsvd;
++};
++struct	getcountjudge_rsp {
++	u8	count_judge[MAX_RATES_LENGTH];
++};
++
++
++struct setratable_parm {
++	u8 ss_ForceUp[NumRates];
++	u8 ss_ULevel[NumRates];
++	u8 ss_DLevel[NumRates];
++	u8 count_judge[NumRates];
++};
++
++struct getratable_parm {
++                uint rsvd;
++};
++struct getratable_rsp {
++        u8 ss_ForceUp[NumRates];
++        u8 ss_ULevel[NumRates];
++        u8 ss_DLevel[NumRates];
++        u8 count_judge[NumRates];
++};
++
++
++//to get TX,RX retry count
++struct gettxretrycnt_parm{
++	unsigned int rsvd;
++};
++struct gettxretrycnt_rsp{
++	unsigned long tx_retrycnt;
++};
++
++struct getrxretrycnt_parm{
++	unsigned int rsvd;
++};
++struct getrxretrycnt_rsp{
++	unsigned long rx_retrycnt;
++};
++
++//to get BCNOK,BCNERR count
++struct getbcnokcnt_parm{
++	unsigned int rsvd;
++};
++struct getbcnokcnt_rsp{
++	unsigned long  bcnokcnt;
++};
++
++struct getbcnerrcnt_parm{
++	unsigned int rsvd;
++};
++struct getbcnerrcnt_rsp{
++	unsigned long bcnerrcnt;
++};
++
++// to get current TX power level
++struct getcurtxpwrlevel_parm{
++	unsigned int rsvd;
++};
++struct getcurtxpwrlevel_rsp{
++	unsigned short tx_power;
++};
++
++struct setprobereqextraie_parm {
++	unsigned char e_id;
++	unsigned char ie_len;
++	unsigned char ie[0];
++};
++
++struct setassocreqextraie_parm {
++	unsigned char e_id;
++	unsigned char ie_len;
++	unsigned char ie[0];
++};
++
++struct setproberspextraie_parm {
++	unsigned char e_id;
++	unsigned char ie_len;
++	unsigned char ie[0];
++};
++
++struct setassocrspextraie_parm {
++	unsigned char e_id;
++	unsigned char ie_len;
++	unsigned char ie[0];
++};
++
++
++struct addBaReq_parm
++{
++ 	unsigned int tid;
++	u8	addr[ETH_ALEN];
++};
++
++/*H2C Handler index: 46 */
++struct set_ch_parm {
++	u8 ch;
++	u8 bw;
++	u8 ch_offset;
++};
++
++#ifdef MP_FIRMWARE_OFFLOAD
++/*H2C Handler index: 47 */
++struct SetTxPower_parm
++{
++	u8 TxPower;
++};
++
++/*H2C Handler index: 48 */
++struct SwitchAntenna_parm
++{
++	u16 antenna_tx;
++	u16 antenna_rx;
++//	R_ANTENNA_SELECT_CCK cck_txrx;
++	u8 cck_txrx;
++};
++
++/*H2C Handler index: 49 */
++struct SetCrystalCap_parm
++{
++	u32 curr_crystalcap;
++};
++
++/*H2C Handler index: 50 */
++struct SetSingleCarrierTx_parm
++{
++	u8 bStart;
++};
++
++/*H2C Handler index: 51 */
++struct SetSingleToneTx_parm
++{
++	u8 bStart;
++	u8 curr_rfpath;
++};
++
++/*H2C Handler index: 52 */
++struct SetCarrierSuppressionTx_parm
++{
++	u8 bStart;
++	u32 curr_rateidx;
++};
++
++/*H2C Handler index: 53 */
++struct SetContinuousTx_parm
++{
++	u8 bStart;
++	u8 CCK_flag; /*1:CCK 2:OFDM*/
++	u32 curr_rateidx;
++};
++
++/*H2C Handler index: 54 */
++struct SwitchBandwidth_parm
++{
++	u8 curr_bandwidth;
++};
++
++#endif	/* MP_FIRMWARE_OFFLOAD */
++
++/*H2C Handler index: 59 */ 
++struct SetChannelPlan_param
++{
++	u8 channel_plan;
++};
++
++/*H2C Handler index: 60 */ 
++struct LedBlink_param
++{
++	PLED_871x	 pLed;
++};
++
++/*H2C Handler index: 61 */ 
++struct SetChannelSwitch_param
++{
++	u8 new_ch_no;
++};
++
++/*H2C Handler index: 62 */ 
++struct TDLSoption_param
++{
++	u8 addr[ETH_ALEN];
++	u8 option;
++};
++
++#define GEN_CMD_CODE(cmd)	cmd ## _CMD_
++
++
++/*
++
++Result: 
++0x00: success
++0x01: sucess, and check Response.
++0x02: cmd ignored due to duplicated sequcne number
++0x03: cmd dropped due to invalid cmd code
++0x04: reserved.
++
++*/
++
++#define H2C_RSP_OFFSET			512
++
++#define H2C_SUCCESS			0x00
++#define H2C_SUCCESS_RSP			0x01
++#define H2C_DUPLICATED			0x02
++#define H2C_DROPPED			0x03
++#define H2C_PARAMETERS_ERROR		0x04
++#define H2C_REJECTED			0x05
++#define H2C_CMD_OVERFLOW		0x06
++#define H2C_RESERVED			0x07
++
++extern u8 rtw_setassocsta_cmd(_adapter  *padapter, u8 *mac_addr);
++extern u8 rtw_setstandby_cmd(_adapter *padapter, uint action);
++u8 rtw_sitesurvey_cmd(_adapter  *padapter, NDIS_802_11_SSID *ssid, int ssid_num, struct rtw_ieee80211_channel *ch, int ch_num);
++extern u8 rtw_createbss_cmd(_adapter  *padapter);
++extern u8 rtw_createbss_cmd_ex(_adapter  *padapter, unsigned char *pbss, unsigned int sz);
++extern u8 rtw_setphy_cmd(_adapter  *padapter, u8 modem, u8 ch);
++extern u8 rtw_setstakey_cmd(_adapter  *padapter, u8 *psta, u8 unicast_key);
++extern u8 rtw_clearstakey_cmd(_adapter *padapter, u8 *psta, u8 entry, u8 enqueue);
++extern u8 rtw_joinbss_cmd(_adapter  *padapter, struct wlan_network* pnetwork);
++u8 rtw_disassoc_cmd(_adapter *padapter, u32 deauth_timeout_ms, bool enqueue);
++extern u8 rtw_setopmode_cmd(_adapter  *padapter, NDIS_802_11_NETWORK_INFRASTRUCTURE networktype);
++extern u8 rtw_setdatarate_cmd(_adapter  *padapter, u8 *rateset);
++extern u8 rtw_setbasicrate_cmd(_adapter  *padapter, u8 *rateset);
++extern u8 rtw_setbbreg_cmd(_adapter * padapter, u8 offset, u8 val);
++extern u8 rtw_setrfreg_cmd(_adapter * padapter, u8 offset, u32 val);
++extern u8 rtw_getbbreg_cmd(_adapter * padapter, u8 offset, u8 * pval);
++extern u8 rtw_getrfreg_cmd(_adapter * padapter, u8 offset, u8 * pval);
++extern u8 rtw_setrfintfs_cmd(_adapter  *padapter, u8 mode);
++extern u8 rtw_setrttbl_cmd(_adapter  *padapter, struct setratable_parm *prate_table);
++extern u8 rtw_getrttbl_cmd(_adapter  *padapter, struct getratable_rsp *pval);
++
++extern u8 rtw_gettssi_cmd(_adapter  *padapter, u8 offset,u8 *pval);
++extern u8 rtw_setfwdig_cmd(_adapter*padapter, u8 type);
++extern u8 rtw_setfwra_cmd(_adapter*padapter, u8 type);
++
++extern u8 rtw_addbareq_cmd(_adapter*padapter, u8 tid, u8 *addr);
++// add for CONFIG_IEEE80211W, none 11w also can use
++extern u8 rtw_reset_securitypriv_cmd(_adapter*padapter);
++extern u8 rtw_free_assoc_resources_cmd(_adapter *padapter);
++extern u8 rtw_dynamic_chk_wk_cmd(_adapter *adapter);
++
++u8 rtw_lps_ctrl_wk_cmd(_adapter*padapter, u8 lps_ctrl_type, u8 enqueue);
++
++#ifdef CONFIG_ANTENNA_DIVERSITY
++extern  u8 rtw_antenna_select_cmd(_adapter*padapter, u8 antenna,u8 enqueue);
++#endif
++
++extern u8 rtw_ps_cmd(_adapter*padapter);
++
++
++#ifdef CONFIG_AP_MODE
++u8 rtw_chk_hi_queue_cmd(_adapter*padapter);
++#endif
++
++u8 rtw_set_ch_cmd(_adapter*padapter, u8 ch, u8 bw, u8 ch_offset, u8 enqueue);
++extern u8 rtw_set_chplan_cmd(_adapter*padapter, u8 chplan, u8 enqueue);
++extern u8 rtw_led_blink_cmd(_adapter*padapter, PLED_871x pLed);
++extern u8 rtw_set_csa_cmd(_adapter*padapter, u8 new_ch_no);
++extern u8 rtw_tdls_cmd(_adapter*padapter, u8 *addr, u8 option);
++
++extern u8 rtw_c2h_wk_cmd(PADAPTER padapter, u8 *c2h_evt);
++
++u8 rtw_drvextra_cmd_hdl(_adapter *padapter, unsigned char *pbuf);
++
++extern void rtw_survey_cmd_callback(_adapter  *padapter, struct cmd_obj *pcmd);
++extern void rtw_disassoc_cmd_callback(_adapter  *padapter, struct cmd_obj *pcmd);
++extern void rtw_joinbss_cmd_callback(_adapter  *padapter, struct cmd_obj *pcmd);	
++extern void rtw_createbss_cmd_callback(_adapter  *padapter, struct cmd_obj *pcmd);
++extern void rtw_getbbrfreg_cmdrsp_callback(_adapter  *padapter, struct cmd_obj *pcmd);
++extern void rtw_readtssi_cmdrsp_callback(_adapter*	padapter,  struct cmd_obj *pcmd);
++
++extern void rtw_setstaKey_cmdrsp_callback(_adapter  *padapter,  struct cmd_obj *pcmd);
++extern void rtw_setassocsta_cmdrsp_callback(_adapter  *padapter,  struct cmd_obj *pcmd);
++extern void rtw_getrttbl_cmdrsp_callback(_adapter  *padapter,  struct cmd_obj *pcmd);
++
++
++struct _cmd_callback {
++	u32	cmd_code;
++	void (*callback)(_adapter  *padapter, struct cmd_obj *cmd);
++};
++
++enum rtw_h2c_cmd
++{
++	GEN_CMD_CODE(_Read_MACREG) ,	/*0*/
++ 	GEN_CMD_CODE(_Write_MACREG) ,    
++ 	GEN_CMD_CODE(_Read_BBREG) ,  
++ 	GEN_CMD_CODE(_Write_BBREG) ,  
++ 	GEN_CMD_CODE(_Read_RFREG) ,  
++ 	GEN_CMD_CODE(_Write_RFREG) , /*5*/
++ 	GEN_CMD_CODE(_Read_EEPROM) ,  
++ 	GEN_CMD_CODE(_Write_EEPROM) ,  
++ 	GEN_CMD_CODE(_Read_EFUSE) ,  
++ 	GEN_CMD_CODE(_Write_EFUSE) , 
++ 	
++ 	GEN_CMD_CODE(_Read_CAM) ,	/*10*/
++ 	GEN_CMD_CODE(_Write_CAM) ,   
++ 	GEN_CMD_CODE(_setBCNITV),
++ 	GEN_CMD_CODE(_setMBIDCFG),
++ 	GEN_CMD_CODE(_JoinBss),   /*14*/
++ 	GEN_CMD_CODE(_DisConnect) , /*15*/
++ 	GEN_CMD_CODE(_CreateBss) ,
++	GEN_CMD_CODE(_SetOpMode) , 
++	GEN_CMD_CODE(_SiteSurvey),  /*18*/
++ 	GEN_CMD_CODE(_SetAuth) ,
++ 	
++ 	GEN_CMD_CODE(_SetKey) ,	/*20*/
++ 	GEN_CMD_CODE(_SetStaKey) ,
++ 	GEN_CMD_CODE(_SetAssocSta) ,
++ 	GEN_CMD_CODE(_DelAssocSta) ,
++ 	GEN_CMD_CODE(_SetStaPwrState) , 
++ 	GEN_CMD_CODE(_SetBasicRate) , /*25*/
++ 	GEN_CMD_CODE(_GetBasicRate) ,
++ 	GEN_CMD_CODE(_SetDataRate) ,
++ 	GEN_CMD_CODE(_GetDataRate) ,
++	GEN_CMD_CODE(_SetPhyInfo) ,
++	
++ 	GEN_CMD_CODE(_GetPhyInfo) ,	/*30*/
++	GEN_CMD_CODE(_SetPhy) ,
++ 	GEN_CMD_CODE(_GetPhy) ,
++ 	GEN_CMD_CODE(_readRssi) ,
++ 	GEN_CMD_CODE(_readGain) ,
++ 	GEN_CMD_CODE(_SetAtim) , /*35*/
++ 	GEN_CMD_CODE(_SetPwrMode) , 
++ 	GEN_CMD_CODE(_JoinbssRpt),
++ 	GEN_CMD_CODE(_SetRaTable) ,
++ 	GEN_CMD_CODE(_GetRaTable) ,  	
++ 	
++ 	GEN_CMD_CODE(_GetCCXReport), /*40*/
++ 	GEN_CMD_CODE(_GetDTMReport),
++ 	GEN_CMD_CODE(_GetTXRateStatistics),
++ 	GEN_CMD_CODE(_SetUsbSuspend),
++ 	GEN_CMD_CODE(_SetH2cLbk),
++ 	GEN_CMD_CODE(_AddBAReq) , /*45*/
++	GEN_CMD_CODE(_SetChannel), /*46*/
++	GEN_CMD_CODE(_SetTxPower), 
++	GEN_CMD_CODE(_SwitchAntenna),
++	GEN_CMD_CODE(_SetCrystalCap),
++	GEN_CMD_CODE(_SetSingleCarrierTx), /*50*/
++	
++	GEN_CMD_CODE(_SetSingleToneTx),/*51*/
++	GEN_CMD_CODE(_SetCarrierSuppressionTx),
++	GEN_CMD_CODE(_SetContinuousTx),
++	GEN_CMD_CODE(_SwitchBandwidth), /*54*/
++	GEN_CMD_CODE(_TX_Beacon), /*55*/
++	
++	GEN_CMD_CODE(_Set_MLME_EVT), /*56*/
++	GEN_CMD_CODE(_Set_Drv_Extra), /*57*/
++	GEN_CMD_CODE(_Set_H2C_MSG), /*58*/
++	
++	GEN_CMD_CODE(_SetChannelPlan), /*59*/
++	GEN_CMD_CODE(_LedBlink), /*60*/
++
++	GEN_CMD_CODE(_SetChannelSwitch), /*61*/
++	GEN_CMD_CODE(_TDLS), /*62*/
++	
++	MAX_H2CCMD
++};
++
++#define _GetBBReg_CMD_		_Read_BBREG_CMD_
++#define _SetBBReg_CMD_ 		_Write_BBREG_CMD_
++#define _GetRFReg_CMD_ 		_Read_RFREG_CMD_
++#define _SetRFReg_CMD_ 		_Write_RFREG_CMD_
++
++#ifdef _RTW_CMD_C_
++struct _cmd_callback 	rtw_cmd_callback[] = 
++{
++	{GEN_CMD_CODE(_Read_MACREG), NULL}, /*0*/
++	{GEN_CMD_CODE(_Write_MACREG), NULL}, 
++	{GEN_CMD_CODE(_Read_BBREG), &rtw_getbbrfreg_cmdrsp_callback},
++	{GEN_CMD_CODE(_Write_BBREG), NULL},
++	{GEN_CMD_CODE(_Read_RFREG), &rtw_getbbrfreg_cmdrsp_callback},
++	{GEN_CMD_CODE(_Write_RFREG), NULL}, /*5*/
++	{GEN_CMD_CODE(_Read_EEPROM), NULL},
++	{GEN_CMD_CODE(_Write_EEPROM), NULL},
++	{GEN_CMD_CODE(_Read_EFUSE), NULL},
++	{GEN_CMD_CODE(_Write_EFUSE), NULL},
++	
++	{GEN_CMD_CODE(_Read_CAM),	NULL},	/*10*/
++	{GEN_CMD_CODE(_Write_CAM),	 NULL},	
++	{GEN_CMD_CODE(_setBCNITV), NULL},
++ 	{GEN_CMD_CODE(_setMBIDCFG), NULL},
++	{GEN_CMD_CODE(_JoinBss), &rtw_joinbss_cmd_callback},  /*14*/
++	{GEN_CMD_CODE(_DisConnect), &rtw_disassoc_cmd_callback}, /*15*/
++	{GEN_CMD_CODE(_CreateBss), &rtw_createbss_cmd_callback},
++	{GEN_CMD_CODE(_SetOpMode), NULL},
++	{GEN_CMD_CODE(_SiteSurvey), &rtw_survey_cmd_callback}, /*18*/
++	{GEN_CMD_CODE(_SetAuth), NULL},
++	
++	{GEN_CMD_CODE(_SetKey), NULL},	/*20*/
++	{GEN_CMD_CODE(_SetStaKey), &rtw_setstaKey_cmdrsp_callback},
++	{GEN_CMD_CODE(_SetAssocSta), &rtw_setassocsta_cmdrsp_callback},
++	{GEN_CMD_CODE(_DelAssocSta), NULL},	
++	{GEN_CMD_CODE(_SetStaPwrState), NULL},	
++	{GEN_CMD_CODE(_SetBasicRate), NULL}, /*25*/
++	{GEN_CMD_CODE(_GetBasicRate), NULL},
++	{GEN_CMD_CODE(_SetDataRate), NULL},
++	{GEN_CMD_CODE(_GetDataRate), NULL},
++	{GEN_CMD_CODE(_SetPhyInfo), NULL},
++	
++	{GEN_CMD_CODE(_GetPhyInfo), NULL}, /*30*/
++	{GEN_CMD_CODE(_SetPhy), NULL},
++	{GEN_CMD_CODE(_GetPhy), NULL},	
++	{GEN_CMD_CODE(_readRssi), NULL},
++	{GEN_CMD_CODE(_readGain), NULL},
++	{GEN_CMD_CODE(_SetAtim), NULL}, /*35*/
++	{GEN_CMD_CODE(_SetPwrMode), NULL},
++	{GEN_CMD_CODE(_JoinbssRpt), NULL},
++	{GEN_CMD_CODE(_SetRaTable), NULL},
++	{GEN_CMD_CODE(_GetRaTable) , NULL},
++ 	
++	{GEN_CMD_CODE(_GetCCXReport), NULL}, /*40*/
++ 	{GEN_CMD_CODE(_GetDTMReport),	NULL},
++ 	{GEN_CMD_CODE(_GetTXRateStatistics), NULL}, 
++ 	{GEN_CMD_CODE(_SetUsbSuspend), NULL}, 
++ 	{GEN_CMD_CODE(_SetH2cLbk), NULL},
++ 	{GEN_CMD_CODE(_AddBAReq), NULL}, /*45*/
++	{GEN_CMD_CODE(_SetChannel), NULL},		/*46*/
++	{GEN_CMD_CODE(_SetTxPower), NULL},
++	{GEN_CMD_CODE(_SwitchAntenna), NULL},
++	{GEN_CMD_CODE(_SetCrystalCap), NULL},
++	{GEN_CMD_CODE(_SetSingleCarrierTx), NULL},	/*50*/
++	
++	{GEN_CMD_CODE(_SetSingleToneTx), NULL}, /*51*/
++	{GEN_CMD_CODE(_SetCarrierSuppressionTx), NULL},
++	{GEN_CMD_CODE(_SetContinuousTx), NULL},
++	{GEN_CMD_CODE(_SwitchBandwidth), NULL},		/*54*/
++	{GEN_CMD_CODE(_TX_Beacon), NULL},/*55*/
++
++	{GEN_CMD_CODE(_Set_MLME_EVT), NULL},/*56*/
++	{GEN_CMD_CODE(_Set_Drv_Extra), NULL},/*57*/
++	{GEN_CMD_CODE(_Set_H2C_MSG), NULL},/*58*/
++	{GEN_CMD_CODE(_SetChannelPlan), NULL},/*59*/
++	{GEN_CMD_CODE(_LedBlink), NULL},/*60*/
++	
++	{GEN_CMD_CODE(_SetChannelSwitch), NULL},/*61*/
++	{GEN_CMD_CODE(_TDLS), NULL},/*62*/
++};
++#endif
++
++#endif // _CMD_H_
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_debug.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_debug.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_debug.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_debug.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,538 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __RTW_DEBUG_H__
++#define __RTW_DEBUG_H__
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++
++
++#define	_no_debug_			0
++#define _drv_emerg_			1
++#define _drv_alert_			2
++#define _drv_crit_			3
++#define _drv_err_			4
++#define	_drv_warning_		5
++#define _drv_notice_			6
++#define _drv_info_			7
++#define _drv_dump_			8
++#define	_drv_debug_		9
++#define _drv_always_ _drv_emerg_
++
++#define _module_rtl871x_xmit_c_		BIT(0)
++#define _module_xmit_osdep_c_		BIT(1)
++#define _module_rtl871x_recv_c_		BIT(2)
++#define _module_recv_osdep_c_		BIT(3)
++#define _module_rtl871x_mlme_c_		BIT(4)
++#define _module_mlme_osdep_c_		BIT(5)
++#define _module_rtl871x_sta_mgt_c_		BIT(6)
++#define _module_rtl871x_cmd_c_			BIT(7)
++#define _module_cmd_osdep_c_		BIT(8)
++#define _module_rtl871x_io_c_				BIT(9)
++#define _module_io_osdep_c_		BIT(10)
++#define _module_os_intfs_c_			BIT(11)
++#define _module_rtl871x_security_c_		BIT(12)
++#define _module_rtl871x_eeprom_c_			BIT(13)
++#define _module_hal_init_c_		BIT(14)
++#define _module_hci_hal_init_c_		BIT(15)
++#define _module_rtl871x_ioctl_c_		BIT(16)
++#define _module_rtl871x_ioctl_set_c_		BIT(17)
++#define _module_rtl871x_ioctl_query_c_	BIT(18)
++#define _module_rtl871x_pwrctrl_c_			BIT(19)
++#define _module_hci_intfs_c_			BIT(20)
++#define _module_hci_ops_c_			BIT(21)
++#define _module_osdep_service_c_			BIT(22)
++#define _module_mp_			BIT(23)
++#define _module_hci_ops_os_c_			BIT(24)
++#define _module_rtl871x_ioctl_os_c		BIT(25)
++#define _module_rtl8712_cmd_c_		BIT(26)
++//#define _module_efuse_			BIT(27)
++#define	_module_rtl8192c_xmit_c_ BIT(28)
++#define _module_hal_xmit_c_	BIT(28)
++#define _module_efuse_			BIT(29)
++#define _module_rtl8712_recv_c_		BIT(30)
++#define _module_rtl8712_led_c_		BIT(31)
++
++#undef _MODULE_DEFINE_
++
++#if defined _RTW_XMIT_C_
++	#define _MODULE_DEFINE_	_module_rtl871x_xmit_c_
++#elif defined _XMIT_OSDEP_C_
++	#define _MODULE_DEFINE_	_module_xmit_osdep_c_
++#elif defined _RTW_RECV_C_
++	#define _MODULE_DEFINE_	_module_rtl871x_recv_c_
++#elif defined _RECV_OSDEP_C_
++	#define _MODULE_DEFINE_	_module_recv_osdep_c_
++#elif defined _RTW_MLME_C_
++	#define _MODULE_DEFINE_	_module_rtl871x_mlme_c_
++#elif defined _MLME_OSDEP_C_
++	#define _MODULE_DEFINE_	_module_mlme_osdep_c_
++#elif defined _RTW_MLME_EXT_C_
++	#define _MODULE_DEFINE_ 1
++#elif defined _RTW_STA_MGT_C_
++	#define _MODULE_DEFINE_	_module_rtl871x_sta_mgt_c_
++#elif defined _RTW_CMD_C_
++	#define _MODULE_DEFINE_	_module_rtl871x_cmd_c_
++#elif defined _CMD_OSDEP_C_
++	#define _MODULE_DEFINE_	_module_cmd_osdep_c_
++#elif defined _RTW_IO_C_
++	#define _MODULE_DEFINE_	_module_rtl871x_io_c_
++#elif defined _IO_OSDEP_C_
++	#define _MODULE_DEFINE_	_module_io_osdep_c_
++#elif defined _OS_INTFS_C_
++	#define	_MODULE_DEFINE_	_module_os_intfs_c_
++#elif defined _RTW_SECURITY_C_
++	#define	_MODULE_DEFINE_	_module_rtl871x_security_c_
++#elif defined _RTW_EEPROM_C_
++	#define	_MODULE_DEFINE_	_module_rtl871x_eeprom_c_
++#elif defined _HAL_INTF_C_
++	#define	_MODULE_DEFINE_	_module_hal_init_c_
++#elif defined _HCI_HAL_INIT_C_
++	#define	_MODULE_DEFINE_	_module_hci_hal_init_c_
++#elif defined _RTL871X_IOCTL_C_
++	#define	_MODULE_DEFINE_	_module_rtl871x_ioctl_c_
++#elif defined _RTL871X_IOCTL_SET_C_
++	#define	_MODULE_DEFINE_	_module_rtl871x_ioctl_set_c_
++#elif defined _RTL871X_IOCTL_QUERY_C_
++	#define	_MODULE_DEFINE_	_module_rtl871x_ioctl_query_c_
++#elif defined _RTL871X_PWRCTRL_C_
++	#define	_MODULE_DEFINE_	_module_rtl871x_pwrctrl_c_
++#elif defined _RTW_PWRCTRL_C_
++	#define	_MODULE_DEFINE_	1
++#elif defined _HCI_INTF_C_
++	#define	_MODULE_DEFINE_	_module_hci_intfs_c_
++#elif defined _HCI_OPS_C_
++	#define	_MODULE_DEFINE_	_module_hci_ops_c_
++#elif defined _SDIO_OPS_C_
++	#define	_MODULE_DEFINE_ 1
++#elif defined _OSDEP_HCI_INTF_C_
++	#define	_MODULE_DEFINE_	_module_hci_intfs_c_
++#elif defined _OSDEP_SERVICE_C_
++	#define	_MODULE_DEFINE_	_module_osdep_service_c_
++#elif defined _HCI_OPS_OS_C_
++	#define	_MODULE_DEFINE_	_module_hci_ops_os_c_
++#elif defined _RTL871X_IOCTL_LINUX_C_
++	#define	_MODULE_DEFINE_	_module_rtl871x_ioctl_os_c
++#elif defined _RTL8712_CMD_C_
++	#define	_MODULE_DEFINE_	_module_rtl8712_cmd_c_
++#elif defined _RTL8192C_XMIT_C_
++	#define	_MODULE_DEFINE_	1
++#elif defined _RTL8723AS_XMIT_C_
++	#define	_MODULE_DEFINE_	1
++#elif defined _RTL8712_RECV_C_
++	#define	_MODULE_DEFINE_	_module_rtl8712_recv_c_
++#elif defined _RTL8192CU_RECV_C_
++	#define	_MODULE_DEFINE_	_module_rtl8712_recv_c_
++#elif defined _RTL871X_MLME_EXT_C_
++	#define _MODULE_DEFINE_	_module_mlme_osdep_c_
++#elif defined _RTW_MP_C_
++	#define	_MODULE_DEFINE_	_module_mp_
++#elif defined _RTW_MP_IOCTL_C_
++	#define	_MODULE_DEFINE_	_module_mp_
++#elif defined _RTW_EFUSE_C_
++	#define	_MODULE_DEFINE_	_module_efuse_
++#endif
++
++#ifdef PLATFORM_OS_CE
++extern void rtl871x_cedbg(const char *fmt, ...);
++#endif
++
++#define RT_TRACE(_Comp, _Level, Fmt) do{}while(0)
++#define _func_enter_ do{}while(0)
++#define _func_exit_ do{}while(0)
++#define RT_PRINT_DATA(_Comp, _Level, _TitleString, _HexData, _HexDataLen) do{}while(0)
++
++#undef	_dbgdump
++
++#ifdef CONFIG_DEBUG_RTL871X
++
++#ifndef _RTL871X_DEBUG_C_
++	extern u32 GlobalDebugLevel;
++	extern u64 GlobalDebugComponents;
++#endif
++
++#ifdef PLATFORM_WINDOWS
++
++	#ifdef PLATFORM_OS_XP
++
++	#define _dbgdump	DbgPrint
++
++	#elif defined PLATFORM_OS_CE
++
++	#define _dbgdump	rtl871x_cedbg
++
++	#endif
++
++#elif defined PLATFORM_LINUX
++
++	#define _dbgdump	printk
++
++#elif defined PLATFORM_FREEBSD
++
++	#define _dbgdump	printf
++
++#endif
++
++#endif /* CONFIG_DEBUG_RTL871X */
++
++
++#if	defined (_dbgdump) && defined (_MODULE_DEFINE_)
++
++		#undef RT_TRACE
++		#define RT_TRACE(_Comp, _Level, Fmt)\
++		do {\
++			if((_Comp & GlobalDebugComponents) && (_Level <= GlobalDebugLevel)) {\
++				_dbgdump("%s [0x%08x,%d]", RTL871X_MODULE_NAME, (unsigned int)_Comp, _Level);\
++				_dbgdump Fmt;\
++			}\
++		}while(0)
++
++#endif
++
++
++#if	defined (_dbgdump)
++
++		#undef  _func_enter_
++		#define _func_enter_ \
++		do {	\
++			if (GlobalDebugLevel >= _drv_debug_) \
++			{																	\
++				_dbgdump("\n %s : %s enters at %d\n", RTL871X_MODULE_NAME, __FUNCTION__, __LINE__);\
++			}		\
++		} while(0)
++
++		#undef  _func_exit_
++		#define _func_exit_ \
++		do {	\
++			if (GlobalDebugLevel >= _drv_debug_) \
++			{																	\
++				_dbgdump("\n %s : %s exits at %d\n", RTL871X_MODULE_NAME, __FUNCTION__, __LINE__); \
++			}	\
++		} while(0)
++
++		#undef RT_PRINT_DATA
++		#define RT_PRINT_DATA(_Comp, _Level, _TitleString, _HexData, _HexDataLen)			\
++			if(((_Comp) & GlobalDebugComponents) && (_Level <= GlobalDebugLevel))	\
++			{									\
++				int __i;								\
++				u8	*ptr = (u8 *)_HexData;				\
++				_dbgdump("Rtl871x: ");						\
++				_dbgdump(_TitleString);						\
++				for( __i=0; __i<(int)_HexDataLen; __i++ )				\
++				{								\
++					_dbgdump("%02X%s", ptr[__i], (((__i + 1) % 4) == 0)?"  ":" ");	\
++					if (((__i + 1) % 16) == 0)	_dbgdump("\n");			\
++				}								\
++				_dbgdump("\n");							\
++			}
++#endif
++
++
++#ifdef CONFIG_DEBUG_RTL819X
++
++#undef	_dbgdump
++
++#ifdef PLATFORM_WINDOWS
++
++	#ifdef PLATFORM_OS_XP
++
++	#define _dbgdump	DbgPrint
++
++	#elif defined PLATFORM_OS_CE
++
++	#define _dbgdump	rtl871x_cedbg
++
++	#endif
++
++#elif defined PLATFORM_LINUX
++
++	#define _dbgdump	printk
++
++#elif defined PLATFORM_FREEBSD
++
++	#define _dbgdump	printf
++
++#endif
++
++#endif /* CONFIG_DEBUG_RTL819X */
++
++
++#ifdef PLATFORM_WINDOWS
++	#define DBG_871X do {} while(0)
++	#define MSG_8192C do {} while(0)
++	#define DBG_8192C do {} while(0)
++	#define WRN_8192C do {} while(0)
++	#define ERR_8192C do {} while(0)
++#endif
++
++#ifdef PLATFORM_LINUX
++	#define DBG_871X(x, ...) do {} while(0)
++	#define MSG_8192C(x, ...) do {} while(0)
++	#define DBG_8192C(x,...) do {} while(0)
++	#define WRN_8192C(x,...) do {} while(0)
++	#define ERR_8192C(x,...) do {} while(0)
++#endif
++
++#ifdef PLATFORM_FREEBSD
++	#define _dbgdump	printf
++	#define DBG_871X(x, ...) do {} while(0)
++	#define MSG_8192C(x, ...) do {} while(0)
++	#define DBG_8192C(x,...) do {} while(0)
++	#define WRN_8192C(x,...) do {} while(0)
++	#define ERR_8192C(x,...) do {} while(0)
++#endif
++
++extern u32 GlobalDebugLevel;
++#define LOG_LEVEL(level, ...)\
++                do {\
++                        if(level <= GlobalDebugLevel) {\
++                                printk(__VA_ARGS__);\
++                        }\
++                }while(0)
++
++#define DBG_871X_LEVEL LOG_LEVEL
++
++#if     defined (_dbgdump)
++        #undef DBG_871X
++//      #define DBG_871X _dbgdump
++        #define DBG_871X(...) LOG_LEVEL(_drv_emerg_ , __VA_ARGS__)
++
++        #undef MSG_8192C
++//      #define MSG_8192C _dbgdump
++        #define MSG_8192C(...) LOG_LEVEL(_drv_emerg_ , __VA_ARGS__)
++
++        #undef DBG_8192C
++//      #define DBG_8192C _dbgdump
++        #define DBG_8192C(...) LOG_LEVEL(_drv_emerg_ ,  __VA_ARGS__)
++
++
++	#undef WRN_8192C
++	#define WRN_8192C _dbgdump
++
++	#undef ERR_8192C
++	#define ERR_8192C _dbgdump
++#endif
++
++
++#ifdef CONFIG_PROC_DEBUG
++
++	int proc_get_drv_version(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++
++	int proc_get_log_level(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++			  
++	int proc_set_log_level(struct file *file, const char *buffer,
++			unsigned long count, void *data);
++
++#ifdef DBG_MEM_ALLOC
++	int proc_get_mstat(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++#endif /* DBG_MEM_ALLOC */
++
++	int proc_get_write_reg(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++
++ 	int proc_set_write_reg(struct file *file, const char *buffer,
++		unsigned long count, void *data);
++
++	int proc_get_read_reg(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++
++	int proc_set_read_reg(struct file *file, const char *buffer,
++		unsigned long count, void *data);
++
++
++	int proc_get_fwstate(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++
++	int proc_get_sec_info(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++
++	int proc_get_mlmext_state(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++
++	int proc_get_qos_option(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++
++	int proc_get_ht_option(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++
++	int proc_get_rf_info(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++
++	int proc_get_ap_info(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++
++	int proc_get_adapter_state(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++
++	int proc_get_trx_info(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++
++	int proc_get_mac_reg_dump1(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++
++	int proc_get_mac_reg_dump2(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++
++	int proc_get_mac_reg_dump3(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++	
++	int proc_get_bb_reg_dump1(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++
++	int proc_get_bb_reg_dump2(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++	
++	int proc_get_bb_reg_dump3(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++	
++	int proc_get_rf_reg_dump1(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++
++	int proc_get_rf_reg_dump2(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++
++	int proc_get_rf_reg_dump3(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++
++	int proc_get_rf_reg_dump4(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++
++#ifdef CONFIG_AP_MODE
++
++	int proc_get_all_sta_info(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++
++#endif
++
++#ifdef DBG_MEMORY_LEAK
++	int proc_get_malloc_cnt(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++#endif
++
++#ifdef CONFIG_FIND_BEST_CHANNEL
++	int proc_get_best_channel(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++	int proc_set_best_channel(struct file *file, const char *buffer,
++		unsigned long count, void *data);
++#endif
++
++	int proc_get_rx_signal(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++
++	int proc_set_rx_signal(struct file *file, const char *buffer,
++		unsigned long count, void *data);
++		
++	int proc_get_ht_enable(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++			  
++	int proc_set_ht_enable(struct file *file, const char *buffer,
++		unsigned long count, void *data);
++			  
++	int proc_get_cbw40_enable(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++
++	int proc_set_cbw40_enable(struct file *file, const char *buffer,
++		unsigned long count, void *data);
++	
++	int proc_get_ampdu_enable(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++			  
++	int proc_set_ampdu_enable(struct file *file, const char *buffer,
++		unsigned long count, void *data);
++	
++	int proc_get_two_path_rssi(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++	
++	int proc_get_rx_stbc(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++		
++	int proc_set_rx_stbc(struct file *file, const char *buffer,
++		unsigned long count, void *data);
++
++
++	int proc_get_vid(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++
++	int proc_get_pid(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++
++	int proc_get_rssi_disp(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++
++	int proc_set_rssi_disp(struct file *file, const char *buffer,
++		unsigned long count, void *data);
++
++#if defined(DBG_CONFIG_ERROR_DETECT)
++int proc_get_sreset(char *page, char **start, off_t offset, int count, int *eof, void *data);
++int proc_set_sreset(struct file *file, const char *buffer, unsigned long count, void *data);
++#endif /* DBG_CONFIG_ERROR_DETECT */
++
++#ifdef CONFIG_DM_ADAPTIVITY
++int proc_get_dm_adaptivity(char *page, char **start,
++			  off_t offset, int count,
++			  int *eof, void *data);
++int proc_set_dm_adaptivity(struct file *file, const char *buffer,
++		unsigned long count, void *data);
++#endif /* CONFIG_DM_ADAPTIVITY */
++
++#endif //CONFIG_PROC_DEBUG
++
++#endif	//__RTW_DEBUG_H__
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_eeprom.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_eeprom.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_eeprom.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_eeprom.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,152 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __RTW_EEPROM_H__
++#define __RTW_EEPROM_H__
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++
++#define	RTL8712_EEPROM_ID			0x8712
++#define	EEPROM_MAX_SIZE			256
++#define	CLOCK_RATE					50			//100us		
++
++//- EEPROM opcodes
++#define EEPROM_READ_OPCODE		06
++#define EEPROM_WRITE_OPCODE		05
++#define EEPROM_ERASE_OPCODE		07
++#define EEPROM_EWEN_OPCODE		19      // Erase/write enable
++#define EEPROM_EWDS_OPCODE		16      // Erase/write disable
++
++//Country codes
++#define USA							0x555320
++#define EUROPE						0x1 //temp, should be provided later	
++#define JAPAN						0x2 //temp, should be provided later
++
++#ifdef CONFIG_SDIO_HCI
++#define eeprom_cis0_sz	17
++#define eeprom_cis1_sz	50
++#endif
++
++#define	EEPROM_CID_DEFAULT			0x0
++#define	EEPROM_CID_ALPHA				0x1
++#define	EEPROM_CID_Senao				0x3
++#define	EEPROM_CID_NetCore				0x5
++#define	EEPROM_CID_CAMEO				0X8
++#define	EEPROM_CID_SITECOM				0x9
++#define	EEPROM_CID_COREGA				0xB
++#define	EEPROM_CID_EDIMAX_BELKIN		0xC
++#define	EEPROM_CID_SERCOMM_BELKIN		0xE
++#define	EEPROM_CID_CAMEO1				0xF
++#define	EEPROM_CID_WNC_COREGA		0x12
++#define	EEPROM_CID_CLEVO				0x13
++#define	EEPROM_CID_WHQL				0xFE // added by chiyoko for dtm, 20090108
++
++//
++// Customer ID, note that: 
++// This variable is initiailzed through EEPROM or registry, 
++// however, its definition may be different with that in EEPROM for 
++// EEPROM size consideration. So, we have to perform proper translation between them.
++// Besides, CustomerID of registry has precedence of that of EEPROM.
++// defined below. 060703, by rcnjko.
++//
++typedef enum _RT_CUSTOMER_ID
++{
++	RT_CID_DEFAULT = 0,
++	RT_CID_8187_ALPHA0 = 1,
++	RT_CID_8187_SERCOMM_PS = 2,
++	RT_CID_8187_HW_LED = 3,
++	RT_CID_8187_NETGEAR = 4,
++	RT_CID_WHQL = 5,
++	RT_CID_819x_CAMEO  = 6, 
++	RT_CID_819x_RUNTOP = 7,
++	RT_CID_819x_Senao = 8,
++	RT_CID_TOSHIBA = 9,	// Merge by Jacken, 2008/01/31.
++	RT_CID_819x_Netcore = 10,
++	RT_CID_Nettronix = 11,
++	RT_CID_DLINK = 12,
++	RT_CID_PRONET = 13,
++	RT_CID_COREGA = 14,
++	RT_CID_CHINA_MOBILE = 15,
++	RT_CID_819x_ALPHA = 16,
++	RT_CID_819x_Sitecom = 17,
++	RT_CID_CCX = 18, // It's set under CCX logo test and isn't demanded for CCX functions, but for test behavior like retry limit and tx report. By Bruce, 2009-02-17.
++	RT_CID_819x_Lenovo = 19,	
++	RT_CID_819x_QMI = 20,
++	RT_CID_819x_Edimax_Belkin = 21,		
++	RT_CID_819x_Sercomm_Belkin = 22,			
++	RT_CID_819x_CAMEO1 = 23,
++	RT_CID_819x_MSI = 24,
++	RT_CID_819x_Acer = 25,
++	RT_CID_819x_AzWave_ASUS = 26,
++	RT_CID_819x_AzWave = 27, // For AzWave in PCIe, The ID is AzWave use and not only Asus
++	RT_CID_819x_HP = 28,
++	RT_CID_819x_WNC_COREGA = 29,
++	RT_CID_819x_Arcadyan_Belkin = 30,
++	RT_CID_819x_SAMSUNG = 31,
++	RT_CID_819x_CLEVO = 32,
++	RT_CID_819x_DELL = 33,
++	RT_CID_819x_PRONETS = 34,
++	RT_CID_819x_Edimax_ASUS = 35,
++	RT_CID_819x_CAMEO_NETGEAR = 36,
++}RT_CUSTOMER_ID, *PRT_CUSTOMER_ID;
++
++struct eeprom_priv 
++{    
++	u8		bautoload_fail_flag;
++	//u8		bempty;
++	//u8		sys_config;
++	u8		mac_addr[6];	//PermanentAddress
++	//u8		config0;
++	u16		channel_plan;
++	//u8		country_string[3];	
++	//u8		tx_power_b[15];
++	//u8		tx_power_g[15];
++	//u8		tx_power_a[201];
++
++	u8		EepromOrEfuse;
++
++	u8		efuse_eeprom_data[EEPROM_MAX_SIZE];
++
++#ifdef CONFIG_SDIO_HCI
++	u8		sdio_setting;	
++	u32		ocr;
++	u8		cis0[eeprom_cis0_sz];
++	u8		cis1[eeprom_cis1_sz];	
++#endif
++};
++
++
++extern void eeprom_write16(_adapter *padapter, u16 reg, u16 data);
++extern u16 eeprom_read16(_adapter *padapter, u16 reg);
++extern void read_eeprom_content(_adapter *padapter);
++extern void eeprom_read_sz(_adapter * padapter, u16 reg,u8* data, u32 sz); 
++
++extern void read_eeprom_content_by_attrib(_adapter *	padapter	);
++
++#ifdef PLATFORM_LINUX
++#ifdef CONFIG_ADAPTOR_INFO_CACHING_FILE
++extern int isAdaptorInfoFileValid(void);
++extern int storeAdaptorInfoFile(char *path, struct eeprom_priv * eeprom_priv);
++extern int retriveAdaptorInfoFile(char *path, struct eeprom_priv * eeprom_priv);
++#endif //CONFIG_ADAPTOR_INFO_CACHING_FILE
++#endif //PLATFORM_LINUX
++
++#endif  //__RTL871X_EEPROM_H__
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_efuse.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_efuse.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_efuse.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_efuse.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,124 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __RTW_EFUSE_H__
++#define __RTW_EFUSE_H__
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++
++#define	EFUSE_ERROE_HANDLE		1
++
++#define	PG_STATE_HEADER 		0x01
++#define	PG_STATE_WORD_0		0x02
++#define	PG_STATE_WORD_1		0x04
++#define	PG_STATE_WORD_2		0x08
++#define	PG_STATE_WORD_3		0x10
++#define	PG_STATE_DATA			0x20
++
++#define	PG_SWBYTE_H			0x01
++#define	PG_SWBYTE_L			0x02
++
++#define	PGPKT_DATA_SIZE		8
++
++#define	EFUSE_WIFI				0
++#define	EFUSE_BT				1
++
++enum _EFUSE_DEF_TYPE {
++	TYPE_EFUSE_MAX_SECTION				= 0,
++	TYPE_EFUSE_REAL_CONTENT_LEN			= 1,
++	TYPE_AVAILABLE_EFUSE_BYTES_BANK		= 2,
++	TYPE_AVAILABLE_EFUSE_BYTES_TOTAL	= 3,
++	TYPE_EFUSE_MAP_LEN					= 4,
++	TYPE_EFUSE_PROTECT_BYTES_BANK		= 5,
++};
++
++#define		EFUSE_MAX_MAP_LEN		256
++#define		EFUSE_MAX_HW_SIZE		512
++#define		EFUSE_MAX_SECTION_BASE	16
++
++#define EXT_HEADER(header) ((header & 0x1F ) == 0x0F)
++#define ALL_WORDS_DISABLED(wde)	((wde & 0x0F) == 0x0F)
++#define GET_HDR_OFFSET_2_0(header) ( (header & 0xE0) >> 5)
++
++#define		EFUSE_REPEAT_THRESHOLD_			3
++
++//=============================================
++//	The following is for BT Efuse definition
++//=============================================
++#define		EFUSE_BT_MAX_MAP_LEN		1024
++#define		EFUSE_MAX_BANK			4
++#define		EFUSE_MAX_BT_BANK		(EFUSE_MAX_BANK-1)
++//=============================================
++/*--------------------------Define Parameters-------------------------------*/
++#define		EFUSE_MAX_WORD_UNIT			4
++
++/*------------------------------Define structure----------------------------*/ 
++typedef struct PG_PKT_STRUCT_A{
++	u8 offset;
++	u8 word_en;
++	u8 data[8];	
++	u8 word_cnts;
++}PGPKT_STRUCT,*PPGPKT_STRUCT;
++/*------------------------------Define structure----------------------------*/ 
++
++
++/*------------------------Export global variable----------------------------*/
++extern u8 fakeEfuseBank;
++extern u32 fakeEfuseUsedBytes;
++extern u8 fakeEfuseContent[];
++extern u8 fakeEfuseInitMap[];
++extern u8 fakeEfuseModifiedMap[];
++
++extern u32 BTEfuseUsedBytes;
++extern u8 BTEfuseContent[EFUSE_MAX_BT_BANK][EFUSE_MAX_HW_SIZE];
++extern u8 BTEfuseInitMap[];
++extern u8 BTEfuseModifiedMap[];
++
++extern u32 fakeBTEfuseUsedBytes;
++extern u8 fakeBTEfuseContent[EFUSE_MAX_BT_BANK][EFUSE_MAX_HW_SIZE];
++extern u8 fakeBTEfuseInitMap[];
++extern u8 fakeBTEfuseModifiedMap[];
++/*------------------------Export global variable----------------------------*/
++
++u8	efuse_GetCurrentSize(PADAPTER padapter, u16 *size);
++u16	efuse_GetMaxSize(PADAPTER padapter);
++u8	rtw_efuse_access(PADAPTER padapter, u8 bRead, u16 start_addr, u16 cnts, u8 *data);
++u8	rtw_efuse_map_read(PADAPTER padapter, u16 addr, u16 cnts, u8 *data);
++u8	rtw_efuse_map_write(PADAPTER padapter, u16 addr, u16 cnts, u8 *data);
++
++u16	Efuse_GetCurrentSize(PADAPTER pAdapter, u8 efuseType, BOOLEAN bPseudoTest);
++u8	Efuse_CalculateWordCnts(u8 word_en);
++void	ReadEFuseByte(PADAPTER Adapter, u16 _offset, u8 *pbuf, BOOLEAN bPseudoTest) ;
++void	EFUSE_GetEfuseDefinition(PADAPTER pAdapter, u8 efuseType, u8 type, void *pOut, BOOLEAN bPseudoTest);
++u8	efuse_OneByteRead(PADAPTER pAdapter, u16 addr, u8 *data, BOOLEAN	 bPseudoTest);
++u8	efuse_OneByteWrite(PADAPTER pAdapter, u16 addr, u8 data, BOOLEAN	 bPseudoTest);
++
++void	Efuse_PowerSwitch(PADAPTER pAdapter,u8	bWrite,u8	 PwrState);
++int 	Efuse_PgPacketRead(PADAPTER pAdapter, u8 offset, u8 *data, BOOLEAN bPseudoTest);
++int 	Efuse_PgPacketWrite(PADAPTER pAdapter, u8 offset, u8 word_en, u8 *data, BOOLEAN bPseudoTest);
++void	efuse_WordEnableDataRead(u8 word_en, u8 *sourdata, u8 *targetdata);
++u8	Efuse_WordEnableDataWrite(PADAPTER pAdapter, u16 efuse_addr, u8 word_en, u8 *data, BOOLEAN bPseudoTest);
++
++u8	EFUSE_Read1Byte(PADAPTER pAdapter, u16 Address);
++void	EFUSE_ShadowMapUpdate(PADAPTER pAdapter, u8 efuseType, BOOLEAN bPseudoTest);
++void	EFUSE_ShadowRead(PADAPTER pAdapter, u8 Type, u16 Offset, u32 *Value);
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_event.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_event.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_event.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_event.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,154 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef _RTW_EVENT_H_
++#define _RTW_EVENT_H_
++#include <drv_conf.h>
++#include <osdep_service.h>
++
++#ifndef CONFIG_RTL8711FW
++#ifdef PLATFORM_LINUX
++#include <wlan_bssdef.h>
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26))
++#include <asm/semaphore.h>
++#else
++#include <linux/semaphore.h>
++#endif
++#include <linux/sem.h>
++#endif
++#else
++#include <wlan_bssdef.h>
++#endif//CONFIG_RTL8711FW
++
++
++
++#ifdef CONFIG_H2CLBK
++#include <h2clbk.h>
++#endif
++
++/*
++Used to report a bss has been scanned
++
++*/
++struct survey_event	{
++	WLAN_BSSID_EX bss;
++};
++
++/*
++Used to report that the requested site survey has been done.
++
++bss_cnt indicates the number of bss that has been reported.
++
++
++*/
++struct surveydone_event {
++	unsigned int	bss_cnt;	
++	
++};
++
++/*
++Used to report the link result of joinning the given bss
++
++
++join_res:
++-1: authentication fail
++-2: association fail
++> 0: TID
++
++*/
++struct joinbss_event {
++	struct	wlan_network	network;
++};
++
++/*
++Used to report a given STA has joinned the created BSS.
++It is used in AP/Ad-HoC(M) mode.
++
++
++*/
++struct stassoc_event {
++	unsigned char macaddr[6];
++	unsigned char rsvd[2];
++	int    cam_id;
++	
++};
++
++struct stadel_event {
++ unsigned char macaddr[6];
++ unsigned char rsvd[2]; //for reason
++ int mac_id;
++};
++
++struct addba_event
++{
++ 	unsigned int tid;
++};
++
++
++#ifdef CONFIG_H2CLBK
++struct c2hlbk_event{
++	unsigned char mac[6];
++	unsigned short	s0;
++	unsigned short	s1;
++	unsigned int	w0;
++	unsigned char	b0;
++	unsigned short  s2;
++	unsigned char	b1;
++	unsigned int	w1;	
++};
++#endif//CONFIG_H2CLBK
++
++#define GEN_EVT_CODE(event)	event ## _EVT_
++
++
++
++struct fwevent {
++	u32	parmsize;
++	void (*event_callback)(_adapter *dev, u8 *pbuf);
++};
++
++
++#define C2HEVENT_SZ			32	
++
++struct event_node{
++	unsigned char *node;
++	unsigned char evt_code;
++	unsigned short evt_sz;
++	volatile int	*caller_ff_tail;
++	int	caller_ff_sz;
++};
++
++struct c2hevent_queue {
++	volatile int	head;
++	volatile int	tail;
++	struct	event_node	nodes[C2HEVENT_SZ];
++	unsigned char	seq;
++};
++
++#define NETWORK_QUEUE_SZ	4
++
++struct network_queue {
++	volatile int	head;
++	volatile int	tail;
++	WLAN_BSSID_EX networks[NETWORK_QUEUE_SZ];	
++};
++
++
++#endif // _WLANEVENT_H_
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_ht.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_ht.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_ht.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_ht.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,50 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef _RTW_HT_H_
++#define _RTW_HT_H_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include "wifi.h"
++
++struct ht_priv
++{
++	u32	ht_option;	
++	u32	ampdu_enable;//for enable Tx A-MPDU
++	//u8	baddbareq_issued[16];
++	u32	tx_amsdu_enable;//for enable Tx A-MSDU
++	u32	tx_amdsu_maxlen; // 1: 8k, 0:4k ; default:8k, for tx
++	u32	rx_ampdu_maxlen; //for rx reordering ctrl win_sz, updated when join_callback.
++	
++	u8	bwmode;//
++	u8	ch_offset;//PRIME_CHNL_OFFSET
++	u8	sgi;//short GI
++
++	//for processing Tx A-MPDU
++	u8	agg_enable_bitmap;
++	//u8	ADDBA_retry_count;
++	u8	candidate_tid_bitmap;
++
++	struct rtw_ieee80211_ht_cap ht_cap;
++	
++};
++
++#endif	//_RTL871X_HT_H_
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_ioctl.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_ioctl.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_ioctl.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_ioctl.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,269 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef _RTW_IOCTL_H_
++#define _RTW_IOCTL_H_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++
++#ifndef OID_802_11_CAPABILITY
++	#define OID_802_11_CAPABILITY                   0x0d010122
++#endif
++
++#ifndef OID_802_11_PMKID
++	#define OID_802_11_PMKID                        0x0d010123
++#endif
++
++
++// For DDK-defined OIDs
++#define OID_NDIS_SEG1	0x00010100
++#define OID_NDIS_SEG2	0x00010200
++#define OID_NDIS_SEG3	0x00020100
++#define OID_NDIS_SEG4	0x01010100
++#define OID_NDIS_SEG5	0x01020100
++#define OID_NDIS_SEG6	0x01020200
++#define OID_NDIS_SEG7	0xFD010100
++#define OID_NDIS_SEG8	0x0D010100
++#define OID_NDIS_SEG9	0x0D010200
++#define OID_NDIS_SEG10	0x0D020200
++
++#define SZ_OID_NDIS_SEG1		  23
++#define SZ_OID_NDIS_SEG2		    3
++#define SZ_OID_NDIS_SEG3		    6
++#define SZ_OID_NDIS_SEG4		    6
++#define SZ_OID_NDIS_SEG5		    4
++#define SZ_OID_NDIS_SEG6		    8
++#define SZ_OID_NDIS_SEG7		    7
++#define SZ_OID_NDIS_SEG8		  36
++#define SZ_OID_NDIS_SEG9		  24
++#define SZ_OID_NDIS_SEG10		  19
++
++// For Realtek-defined OIDs
++#define OID_MP_SEG1		0xFF871100
++#define OID_MP_SEG2		0xFF818000
++
++#define OID_MP_SEG3		0xFF818700
++#define OID_MP_SEG4		0xFF011100
++
++#define DEBUG_OID(dbg, str)     		\
++       if((!dbg))				    			\
++      	{					    			\
++	   RT_TRACE(_module_rtl871x_ioctl_c_,_drv_info_,("%s(%d): %s", __FUNCTION__, __LINE__, str));	\
++      	}			
++
++
++enum oid_type
++{
++	QUERY_OID,
++	SET_OID
++};
++
++struct oid_funs_node {
++	unsigned int oid_start; //the starting number for OID
++	unsigned int oid_end; //the ending number for OID
++	struct oid_obj_priv *node_array; 
++	unsigned int array_sz; //the size of node_array
++	int query_counter; //count the number of query hits for this segment  
++	int set_counter; //count the number of set hits for this segment  
++};
++
++struct oid_par_priv
++{
++	void		*adapter_context;
++	NDIS_OID	oid;
++	void		*information_buf;
++	u32		information_buf_len;
++	u32		*bytes_rw;
++	u32		*bytes_needed;
++	enum oid_type	type_of_oid;
++	u32		dbg;
++};
++
++struct oid_obj_priv {
++	unsigned char	dbg; // 0: without OID debug message  1: with OID debug message 
++	NDIS_STATUS (*oidfuns)(struct oid_par_priv *poid_par_priv);	
++};
++
++#if (defined(CONFIG_MP_INCLUDED) && defined(_RTW_MP_IOCTL_C_)) || \
++	(defined(PLATFORM_WINDOWS) && defined(_RTW_IOCTL_RTL_C_))
++static NDIS_STATUS oid_null_function(struct oid_par_priv* poid_par_priv)
++{
++	_func_enter_;
++	_func_exit_;
++	return NDIS_STATUS_SUCCESS;
++}
++#endif
++
++#ifdef PLATFORM_WINDOWS
++
++int TranslateNdisPsToRtPs(IN NDIS_802_11_POWER_MODE	ndisPsMode);
++
++//OID Handler for Segment 1
++NDIS_STATUS oid_gen_supported_list_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_gen_hardware_status_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_gen_media_supported_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_gen_media_in_use_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_gen_maximum_lookahead_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_gen_maximum_frame_size_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_gen_link_speed_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_gen_transmit_buffer_space_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_gen_receive_buffer_space_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_gen_transmit_block_size_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_gen_receive_block_size_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_gen_vendor_id_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_gen_vendor_description_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_gen_current_packet_filter_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_gen_current_lookahead_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_gen_driver_version_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_gen_maximum_total_size_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_gen_protocol_options_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_gen_mac_options_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_gen_media_connect_status_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_gen_maximum_send_packets_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_gen_vendor_driver_version_hdl(struct oid_par_priv* poid_par_priv);
++
++
++//OID Handler for Segment 2
++NDIS_STATUS oid_gen_physical_medium_hdl(struct oid_par_priv* poid_par_priv);
++
++//OID Handler for Segment 3
++NDIS_STATUS oid_gen_xmit_ok_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_gen_rcv_ok_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_gen_xmit_error_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_gen_rcv_error_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_gen_rcv_no_buffer_hdl(struct oid_par_priv* poid_par_priv);
++
++
++//OID Handler for Segment 4
++NDIS_STATUS oid_802_3_permanent_address_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_3_current_address_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_3_multicast_list_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_3_maximum_list_size_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_3_mac_options_hdl(struct oid_par_priv* poid_par_priv);
++
++
++
++//OID Handler for Segment 5
++NDIS_STATUS oid_802_3_rcv_error_alignment_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_3_xmit_one_collision_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_3_xmit_more_collisions_hdl(struct oid_par_priv* poid_par_priv);
++
++
++//OID Handler for Segment 6
++NDIS_STATUS oid_802_3_xmit_deferred_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_3_xmit_max_collisions_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_3_rcv_overrun_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_3_xmit_underrun_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_3_xmit_heartbeat_failure_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_3_xmit_times_crs_lost_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_3_xmit_late_collisions_hdl(struct oid_par_priv* poid_par_priv);
++
++
++
++//OID Handler for Segment 7
++NDIS_STATUS oid_pnp_capabilities_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_pnp_set_power_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_pnp_query_power_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_pnp_add_wake_up_pattern_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_pnp_remove_wake_up_pattern_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_pnp_wake_up_pattern_list_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_pnp_enable_wake_up_hdl(struct oid_par_priv* poid_par_priv);
++
++
++
++//OID Handler for Segment 8
++NDIS_STATUS oid_802_11_bssid_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_ssid_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_infrastructure_mode_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_add_wep_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_remove_wep_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_disassociate_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_authentication_mode_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_privacy_filter_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_bssid_list_scan_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_encryption_status_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_reload_defaults_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_add_key_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_remove_key_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_association_information_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_test_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_media_stream_mode_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_capability_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_pmkid_hdl(struct oid_par_priv* poid_par_priv);
++
++
++
++
++
++//OID Handler for Segment 9
++NDIS_STATUS oid_802_11_network_types_supported_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_network_type_in_use_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_tx_power_level_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_rssi_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_rssi_trigger_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_fragmentation_threshold_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_rts_threshold_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_number_of_antennas_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_rx_antenna_selected_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_tx_antenna_selected_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_supported_rates_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_desired_rates_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_configuration_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_power_mode_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_802_11_bssid_list_hdl(struct oid_par_priv* poid_par_priv);
++
++
++//OID Handler for Segment 10
++NDIS_STATUS oid_802_11_statistics_hdl(struct oid_par_priv* poid_par_priv);
++
++
++//OID Handler for Segment ED 
++NDIS_STATUS oid_rt_mh_vender_id_hdl(struct oid_par_priv* poid_par_priv);
++
++void Set_802_3_MULTICAST_LIST(ADAPTER *pAdapter, UCHAR *MCListbuf, ULONG MCListlen, BOOLEAN bAcceptAllMulticast);
++
++#endif// end of PLATFORM_WINDOWS
++
++
++#if defined(PLATFORM_LINUX) && defined(CONFIG_WIRELESS_EXT)
++extern struct iw_handler_def  rtw_handlers_def;
++#endif
++
++extern	NDIS_STATUS drv_query_info(
++	IN	_nic_hdl		MiniportAdapterContext,
++	IN	NDIS_OID		Oid,
++	IN	void *			InformationBuffer,
++	IN	u32			InformationBufferLength,
++	OUT	u32*			BytesWritten,
++	OUT	u32*			BytesNeeded
++	);
++
++extern	NDIS_STATUS 	drv_set_info(
++	IN	_nic_hdl		MiniportAdapterContext,
++	IN	NDIS_OID		Oid,
++	IN	void *			InformationBuffer,
++	IN	u32			InformationBufferLength,
++	OUT	u32*			BytesRead,
++	OUT	u32*			BytesNeeded
++	);
++
++#endif // #ifndef __INC_CEINFO_
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_ioctl_query.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_ioctl_query.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_ioctl_query.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_ioctl_query.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,36 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef _RTW_IOCTL_QUERY_H_
++#define _RTW_IOCTL_QUERY_H_
++
++#include <drv_conf.h>
++#include <drv_types.h>
++
++
++#ifdef PLATFORM_WINDOWS
++
++u8 query_802_11_capability(_adapter*	padapter,u8*	pucBuf,u32 *	pulOutLen);
++u8 query_802_11_association_information (_adapter * padapter, PNDIS_802_11_ASSOCIATION_INFORMATION pAssocInfo);
++
++#endif
++
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_ioctl_rtl.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_ioctl_rtl.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_ioctl_rtl.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_ioctl_rtl.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,83 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef _RTW_IOCTL_RTL_H_
++#define _RTW_IOCTL_RTL_H_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++
++//************** oid_rtl_seg_01_01 ************** 
++NDIS_STATUS oid_rt_get_signal_quality_hdl(struct oid_par_priv* poid_par_priv);//84
++NDIS_STATUS oid_rt_get_small_packet_crc_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_get_middle_packet_crc_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_get_large_packet_crc_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_get_tx_retry_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_get_rx_retry_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_get_rx_total_packet_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_get_tx_beacon_ok_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_get_tx_beacon_err_hdl(struct oid_par_priv* poid_par_priv);
++
++NDIS_STATUS oid_rt_pro_set_fw_dig_state_hdl(struct oid_par_priv* poid_par_priv);	//8a
++NDIS_STATUS oid_rt_pro_set_fw_ra_state_hdl(struct oid_par_priv* poid_par_priv);	//8b
++
++NDIS_STATUS oid_rt_get_rx_icv_err_hdl(struct oid_par_priv* poid_par_priv);//93
++NDIS_STATUS oid_rt_set_encryption_algorithm_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_get_preamble_mode_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_get_ap_ip_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_get_channelplan_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_set_channelplan_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_set_preamble_mode_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_set_bcn_intvl_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_dedicate_probe_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_get_total_tx_bytes_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_get_total_rx_bytes_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_current_tx_power_level_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_get_enc_key_mismatch_count_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_get_enc_key_match_count_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_get_channel_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_get_hardware_radio_off_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_get_key_mismatch_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_supported_wireless_mode_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_get_channel_list_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_get_scan_in_progress_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_forced_data_rate_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_wireless_mode_for_scan_list_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_get_bss_wireless_mode_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_scan_with_magic_packet_hdl(struct oid_par_priv* poid_par_priv);
++
++//**************  oid_rtl_seg_01_03 section start ************** 
++NDIS_STATUS oid_rt_ap_get_associated_station_list_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_ap_switch_into_ap_mode_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_ap_supported_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_ap_set_passphrase_hdl(struct oid_par_priv* poid_par_priv);
++
++// oid_rtl_seg_01_11 
++NDIS_STATUS oid_rt_pro_rf_write_registry_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_rf_read_registry_hdl(struct oid_par_priv* poid_par_priv);
++
++//**************  oid_rtl_seg_03_00 section start **************  
++NDIS_STATUS oid_rt_get_connect_state_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_set_default_key_id_hdl(struct oid_par_priv* poid_par_priv);
++
++
++
++
++#endif
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_ioctl_set.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_ioctl_set.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_ioctl_set.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_ioctl_set.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,79 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __RTW_IOCTL_SET_H_
++#define __RTW_IOCTL_SET_H_
++
++#include <drv_conf.h>
++#include <drv_types.h>
++
++
++typedef u8 NDIS_802_11_PMKID_VALUE[16];
++
++typedef struct _BSSIDInfo {
++	NDIS_802_11_MAC_ADDRESS  BSSID;
++	NDIS_802_11_PMKID_VALUE  PMKID;
++} BSSIDInfo, *PBSSIDInfo;
++
++
++#ifdef PLATFORM_OS_XP
++typedef struct _NDIS_802_11_PMKID {
++	u32	Length;
++	u32	BSSIDInfoCount;
++	BSSIDInfo BSSIDInfo[1];
++} NDIS_802_11_PMKID, *PNDIS_802_11_PMKID;
++#endif
++
++
++#ifdef PLATFORM_WINDOWS
++u8 rtw_set_802_11_reload_defaults(_adapter * padapter, NDIS_802_11_RELOAD_DEFAULTS reloadDefaults);
++u8 rtw_set_802_11_test(_adapter * padapter, NDIS_802_11_TEST * test);
++u8 rtw_set_802_11_pmkid(_adapter *pdapter, NDIS_802_11_PMKID *pmkid);
++
++u8 rtw_pnp_set_power_sleep(_adapter* padapter);
++u8 rtw_pnp_set_power_wakeup(_adapter* padapter);
++
++void rtw_pnp_resume_wk(void *context);
++void rtw_pnp_sleep_wk(void * context);
++
++#endif
++
++u8 rtw_set_802_11_add_key(_adapter * padapter, NDIS_802_11_KEY * key);
++u8 rtw_set_802_11_authentication_mode(_adapter *pdapter, NDIS_802_11_AUTHENTICATION_MODE authmode);
++u8 rtw_set_802_11_bssid(_adapter* padapter, u8 *bssid);
++u8 rtw_set_802_11_add_wep(_adapter * padapter, NDIS_802_11_WEP * wep);
++u8 rtw_set_802_11_disassociate(_adapter * padapter);
++u8 rtw_set_802_11_bssid_list_scan(_adapter* padapter, NDIS_802_11_SSID *pssid, int ssid_max_num);
++u8 rtw_set_802_11_infrastructure_mode(_adapter * padapter, NDIS_802_11_NETWORK_INFRASTRUCTURE networktype);
++u8 rtw_set_802_11_remove_wep(_adapter * padapter, u32 keyindex);
++u8 rtw_set_802_11_ssid(_adapter * padapter, NDIS_802_11_SSID * ssid);
++u8 rtw_set_802_11_connect(_adapter* padapter, u8 *bssid, NDIS_802_11_SSID *ssid);
++u8 rtw_set_802_11_remove_key(_adapter * padapter, NDIS_802_11_REMOVE_KEY * key);
++
++u8 rtw_validate_bssid(u8 *bssid);
++u8 rtw_validate_ssid(NDIS_802_11_SSID *ssid);
++
++u16 rtw_get_cur_max_rate(_adapter *adapter);
++int rtw_set_scan_mode(_adapter *adapter, RT_SCAN_TYPE scan_mode);
++int rtw_set_channel_plan(_adapter *adapter, u8 channel_plan);
++int rtw_set_country(_adapter *adapter, const char *country_code);
++int rtw_set_band(_adapter *adapter, enum _BAND band);
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_io.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_io.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_io.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_io.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,504 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++
++#ifndef _RTW_IO_H_
++#define _RTW_IO_H_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <osdep_intf.h>
++
++#ifdef PLATFORM_LINUX
++#include <asm/byteorder.h>
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26))
++#include <asm/semaphore.h>
++#else
++#include <linux/semaphore.h>
++#endif
++#include <linux/list.h>
++//#include <linux/smp_lock.h>
++#include <linux/spinlock.h>
++#include <asm/atomic.h>
++
++#ifdef CONFIG_USB_HCI
++#include <linux/usb.h>
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21))
++#include <linux/usb_ch9.h>
++#else
++#include <linux/usb/ch9.h>
++#endif
++#endif //CONFIG_USB_HCI
++
++#endif //PLATFORM_LINUX
++
++
++#define NUM_IOREQ		8
++
++#ifdef PLATFORM_WINDOWS
++#define MAX_PROT_SZ	64
++#endif
++#ifdef PLATFORM_LINUX
++#define MAX_PROT_SZ	(64-16)
++#endif
++
++#define _IOREADY			0
++#define _IO_WAIT_COMPLETE   1
++#define _IO_WAIT_RSP        2
++
++// IO COMMAND TYPE
++#define _IOSZ_MASK_		(0x7F)
++#define _IO_WRITE_		BIT(7)
++#define _IO_FIXED_		BIT(8)
++#define _IO_BURST_		BIT(9)
++#define _IO_BYTE_		BIT(10)
++#define _IO_HW_			BIT(11)
++#define _IO_WORD_		BIT(12)
++#define _IO_SYNC_		BIT(13)
++#define _IO_CMDMASK_	(0x1F80)
++
++
++/* 
++	For prompt mode accessing, caller shall free io_req
++	Otherwise, io_handler will free io_req
++*/
++
++
++
++// IO STATUS TYPE
++#define _IO_ERR_		BIT(2)
++#define _IO_SUCCESS_	BIT(1)
++#define _IO_DONE_		BIT(0)
++
++
++#define IO_RD32			(_IO_SYNC_ | _IO_WORD_)
++#define IO_RD16			(_IO_SYNC_ | _IO_HW_)
++#define IO_RD8			(_IO_SYNC_ | _IO_BYTE_)
++
++#define IO_RD32_ASYNC	(_IO_WORD_)
++#define IO_RD16_ASYNC	(_IO_HW_)
++#define IO_RD8_ASYNC	(_IO_BYTE_)
++
++#define IO_WR32			(_IO_WRITE_ | _IO_SYNC_ | _IO_WORD_)
++#define IO_WR16			(_IO_WRITE_ | _IO_SYNC_ | _IO_HW_)
++#define IO_WR8			(_IO_WRITE_ | _IO_SYNC_ | _IO_BYTE_)
++
++#define IO_WR32_ASYNC	(_IO_WRITE_ | _IO_WORD_)
++#define IO_WR16_ASYNC	(_IO_WRITE_ | _IO_HW_)
++#define IO_WR8_ASYNC	(_IO_WRITE_ | _IO_BYTE_)
++
++/*
++
++	Only Sync. burst accessing is provided.
++
++*/
++
++#define IO_WR_BURST(x)		(_IO_WRITE_ | _IO_SYNC_ | _IO_BURST_ | ( (x) & _IOSZ_MASK_))
++#define IO_RD_BURST(x)		(_IO_SYNC_ | _IO_BURST_ | ( (x) & _IOSZ_MASK_))
++
++
++
++//below is for the intf_option bit defition...
++
++#define _INTF_ASYNC_	BIT(0)	//support async io
++
++struct intf_priv;
++struct intf_hdl;
++struct io_queue;
++
++struct _io_ops
++{
++		u8 (*_read8)(struct intf_hdl *pintfhdl, u32 addr);
++		u16 (*_read16)(struct intf_hdl *pintfhdl, u32 addr);
++		u32 (*_read32)(struct intf_hdl *pintfhdl, u32 addr);
++
++		int (*_write8)(struct intf_hdl *pintfhdl, u32 addr, u8 val);
++		int (*_write16)(struct intf_hdl *pintfhdl, u32 addr, u16 val);
++		int (*_write32)(struct intf_hdl *pintfhdl, u32 addr, u32 val);
++		int (*_writeN)(struct intf_hdl *pintfhdl, u32 addr, u32 length, u8 *pdata);
++
++		int (*_write8_async)(struct intf_hdl *pintfhdl, u32 addr, u8 val);
++		int (*_write16_async)(struct intf_hdl *pintfhdl, u32 addr, u16 val);
++		int (*_write32_async)(struct intf_hdl *pintfhdl, u32 addr, u32 val);
++
++		void (*_read_mem)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem);
++		void (*_write_mem)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem);
++
++		void (*_sync_irp_protocol_rw)(struct io_queue *pio_q);
++
++		u32 (*_read_interrupt)(struct intf_hdl *pintfhdl, u32 addr);
++
++		u32 (*_read_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem);
++		u32 (*_write_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem);
++
++		u32 (*_write_scsi)(struct intf_hdl *pintfhdl,u32 cnt, u8 *pmem);
++
++		void (*_read_port_cancel)(struct intf_hdl *pintfhdl);
++		void (*_write_port_cancel)(struct intf_hdl *pintfhdl);
++		
++};
++
++struct io_req {	
++	_list	list;
++	u32	addr;	
++	volatile u32	val;
++	u32	command;
++	u32	status;
++	u8	*pbuf;	
++	_sema	sema;
++
++#ifdef PLATFORM_OS_CE
++#ifdef CONFIG_USB_HCI
++	// URB handler for rtw_write_mem
++	USB_TRANSFER usb_transfer_write_mem;
++#endif
++#endif
++	
++	void (*_async_io_callback)(_adapter *padater, struct io_req *pio_req, u8 *cnxt);
++	u8 *cnxt;	
++
++#ifdef PLATFORM_OS_XP	
++	PMDL pmdl;
++	PIRP  pirp; 
++
++#ifdef CONFIG_SDIO_HCI
++	PSDBUS_REQUEST_PACKET sdrp;
++#endif	
++
++#endif	
++
++
++};
++
++struct	intf_hdl {
++
++/*	
++	u32	intf_option;
++	u32	bus_status;
++	u32	do_flush;
++	u8	*adapter;
++	u8	*intf_dev;	
++	struct intf_priv	*pintfpriv;
++	u8	cnt;
++	void (*intf_hdl_init)(u8 *priv);
++	void (*intf_hdl_unload)(u8 *priv);
++	void (*intf_hdl_open)(u8 *priv);
++	void (*intf_hdl_close)(u8 *priv);
++	struct	_io_ops	io_ops;
++	//u8 intf_status;//moved to struct intf_priv
++	u16 len;
++	u16 done_len;	
++*/
++	_adapter *padapter;
++	struct dvobj_priv *pintf_dev;//	pointer to &(padapter->dvobjpriv);
++
++	struct _io_ops	io_ops;
++
++};
++
++struct reg_protocol_rd {
++
++#ifdef CONFIG_LITTLE_ENDIAN	
++
++	//DW1
++	u32		NumOfTrans:4;
++	u32		Reserved1:4;
++	u32		Reserved2:24;
++	//DW2
++	u32		ByteCount:7;
++	u32		WriteEnable:1;		//0:read, 1:write
++	u32		FixOrContinuous:1;	//0:continuous, 1: Fix
++	u32		BurstMode:1;
++	u32		Byte1Access:1;
++	u32		Byte2Access:1;
++	u32		Byte4Access:1;
++	u32		Reserved3:3;
++	u32		Reserved4:16;
++	//DW3
++	u32		BusAddress;
++	//DW4
++	//u32		Value;
++#else
++
++
++//DW1
++	u32 Reserved1  :4;
++	u32 NumOfTrans :4;	
++
++	u32 Reserved2  :24;	
++
++	//DW2
++	u32 WriteEnable : 1;
++	u32 ByteCount :7;	
++
++
++	u32 Reserved3 : 3;
++	u32 Byte4Access : 1;	
++
++	u32 Byte2Access : 1;
++	u32 Byte1Access : 1;	
++	u32 BurstMode :1 ;	
++	u32 FixOrContinuous : 1;	
++
++	u32 Reserved4 : 16;
++
++	//DW3
++	u32		BusAddress;
++
++	//DW4
++	//u32		Value;
++
++#endif
++	
++};
++
++
++struct reg_protocol_wt {
++	
++
++#ifdef CONFIG_LITTLE_ENDIAN
++
++	//DW1
++	u32		NumOfTrans:4;
++	u32		Reserved1:4;
++	u32		Reserved2:24;
++	//DW2
++	u32		ByteCount:7;
++	u32		WriteEnable:1;		//0:read, 1:write
++	u32		FixOrContinuous:1;	//0:continuous, 1: Fix
++	u32		BurstMode:1;
++	u32		Byte1Access:1;
++	u32		Byte2Access:1;
++	u32		Byte4Access:1;
++	u32		Reserved3:3;
++	u32		Reserved4:16;
++	//DW3
++	u32		BusAddress;
++	//DW4
++	u32		Value;
++
++#else
++	//DW1
++	u32 Reserved1  :4;
++	u32 NumOfTrans :4;	
++
++	u32 Reserved2  :24;	
++
++	//DW2
++	u32 WriteEnable : 1;
++	u32 ByteCount :7;	
++		
++	u32 Reserved3 : 3;
++	u32 Byte4Access : 1;	
++
++	u32 Byte2Access : 1;
++	u32 Byte1Access : 1;	
++	u32 BurstMode :1 ;	
++	u32 FixOrContinuous : 1;	
++
++	u32 Reserved4 : 16;
++
++	//DW3
++	u32		BusAddress;
++
++	//DW4
++	u32		Value;
++
++#endif
++
++};
++
++
++
++/*
++Below is the data structure used by _io_handler
++
++*/
++
++struct io_queue {	
++	_lock	lock;	
++	_list  	free_ioreqs;	
++	_list		pending;		//The io_req list that will be served in the single protocol read/write.	
++	_list		processing;
++	u8	*free_ioreqs_buf; // 4-byte aligned
++	u8	*pallocated_free_ioreqs_buf;
++	struct	intf_hdl	intf;
++};
++
++struct io_priv{
++	
++	_adapter *padapter;	
++		
++	struct intf_hdl intf;
++
++};
++
++extern uint ioreq_flush(_adapter *adapter, struct io_queue *ioqueue);
++extern void sync_ioreq_enqueue(struct io_req *preq,struct io_queue *ioqueue);
++extern uint sync_ioreq_flush(_adapter *adapter, struct io_queue *ioqueue);
++
++
++extern uint free_ioreq(struct io_req *preq, struct io_queue *pio_queue);
++extern struct io_req *alloc_ioreq(struct io_queue *pio_q);
++
++extern uint register_intf_hdl(u8 *dev, struct intf_hdl *pintfhdl);
++extern void unregister_intf_hdl(struct intf_hdl *pintfhdl);
++
++extern void _rtw_attrib_read(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
++extern void _rtw_attrib_write(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
++
++extern u8 _rtw_read8(_adapter *adapter, u32 addr);
++extern u16 _rtw_read16(_adapter *adapter, u32 addr);
++extern u32 _rtw_read32(_adapter *adapter, u32 addr);
++extern void _rtw_read_mem(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
++extern void _rtw_read_port(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
++extern void _rtw_read_port_cancel(_adapter *adapter);
++
++
++extern int _rtw_write8(_adapter *adapter, u32 addr, u8 val);
++extern int _rtw_write16(_adapter *adapter, u32 addr, u16 val);
++extern int _rtw_write32(_adapter *adapter, u32 addr, u32 val);
++extern int _rtw_writeN(_adapter *adapter, u32 addr, u32 length, u8 *pdata);
++
++extern int _rtw_write8_async(_adapter *adapter, u32 addr, u8 val);
++extern int _rtw_write16_async(_adapter *adapter, u32 addr, u16 val);
++extern int _rtw_write32_async(_adapter *adapter, u32 addr, u32 val);
++
++extern void _rtw_write_mem(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
++extern u32 _rtw_write_port(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
++u32 _rtw_write_port_and_wait(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem, int timeout_ms);
++extern void _rtw_write_port_cancel(_adapter *adapter);
++
++#ifdef DBG_IO
++bool match_read_sniff_ranges(u16 addr, u16 len);
++bool match_write_sniff_ranges(u16 addr, u16 len);
++
++extern u8 dbg_rtw_read8(_adapter *adapter, u32 addr, const char *caller, const int line);
++extern u16 dbg_rtw_read16(_adapter *adapter, u32 addr, const char *caller, const int line);
++extern u32 dbg_rtw_read32(_adapter *adapter, u32 addr, const char *caller, const int line);
++
++extern int dbg_rtw_write8(_adapter *adapter, u32 addr, u8 val, const char *caller, const int line);
++extern int dbg_rtw_write16(_adapter *adapter, u32 addr, u16 val, const char *caller, const int line);
++extern int dbg_rtw_write32(_adapter *adapter, u32 addr, u32 val, const char *caller, const int line);
++extern int dbg_rtw_writeN(_adapter *adapter, u32 addr ,u32 length , u8 *data, const char *caller, const int line);
++
++#define rtw_read8(adapter, addr) dbg_rtw_read8((adapter), (addr), __FUNCTION__, __LINE__)
++#define rtw_read16(adapter, addr) dbg_rtw_read16((adapter), (addr), __FUNCTION__, __LINE__)
++#define rtw_read32(adapter, addr) dbg_rtw_read32((adapter), (addr), __FUNCTION__, __LINE__)
++#define rtw_read_mem(adapter, addr, cnt, mem) _rtw_read_mem((adapter), (addr), (cnt), (mem))
++#define rtw_read_port(adapter, addr, cnt, mem) _rtw_read_port((adapter), (addr), (cnt), (mem))
++#define rtw_read_port_cancel(adapter) _rtw_read_port_cancel((adapter))
++
++#define  rtw_write8(adapter, addr, val) dbg_rtw_write8((adapter), (addr), (val), __FUNCTION__, __LINE__)
++#define  rtw_write16(adapter, addr, val) dbg_rtw_write16((adapter), (addr), (val), __FUNCTION__, __LINE__)
++#define  rtw_write32(adapter, addr, val) dbg_rtw_write32((adapter), (addr), (val), __FUNCTION__, __LINE__)
++#define  rtw_writeN(adapter, addr, length, data) dbg_rtw_writeN((adapter), (addr), (length), (data), __FUNCTION__, __LINE__)
++
++#define rtw_write8_async(adapter, addr, val) _rtw_write8_async((adapter), (addr), (val))
++#define rtw_write16_async(adapter, addr, val) _rtw_write16_async((adapter), (addr), (val))
++#define rtw_write32_async(adapter, addr, val) _rtw_write32_async((adapter), (addr), (val))
++
++#define rtw_write_mem(adapter, addr, cnt, mem) _rtw_write_mem((adapter), addr, cnt, mem)
++#define rtw_write_port(adapter, addr, cnt, mem) _rtw_write_port(adapter, addr, cnt, mem)
++#define rtw_write_port_and_wait(adapter, addr, cnt, mem, timeout_ms) _rtw_write_port_and_wait((adapter), (addr), (cnt), (mem), (timeout_ms))
++#define rtw_write_port_cancel(adapter) _rtw_write_port_cancel(adapter)
++#else //DBG_IO
++#define rtw_read8(adapter, addr) _rtw_read8((adapter), (addr))
++#define rtw_read16(adapter, addr) _rtw_read16((adapter), (addr))
++#define rtw_read32(adapter, addr) _rtw_read32((adapter), (addr))
++#define rtw_read_mem(adapter, addr, cnt, mem) _rtw_read_mem((adapter), (addr), (cnt), (mem))
++#define rtw_read_port(adapter, addr, cnt, mem) _rtw_read_port((adapter), (addr), (cnt), (mem))
++#define rtw_read_port_cancel(adapter) _rtw_read_port_cancel((adapter))
++
++#define  rtw_write8(adapter, addr, val) _rtw_write8((adapter), (addr), (val))
++#define  rtw_write16(adapter, addr, val) _rtw_write16((adapter), (addr), (val))
++#define  rtw_write32(adapter, addr, val) _rtw_write32((adapter), (addr), (val))
++#define  rtw_writeN(adapter, addr, length, data) _rtw_writeN((adapter), (addr), (length), (data))
++
++#define rtw_write8_async(adapter, addr, val) _rtw_write8_async((adapter), (addr), (val))
++#define rtw_write16_async(adapter, addr, val) _rtw_write16_async((adapter), (addr), (val))
++#define rtw_write32_async(adapter, addr, val) _rtw_write32_async((adapter), (addr), (val))
++
++#define rtw_write_mem(adapter, addr, cnt, mem) _rtw_write_mem((adapter), (addr), (cnt), (mem))
++#define rtw_write_port(adapter, addr, cnt, mem) _rtw_write_port((adapter), (addr), (cnt), (mem))
++#define rtw_write_port_and_wait(adapter, addr, cnt, mem, timeout_ms) _rtw_write_port_and_wait((adapter), (addr), (cnt), (mem), (timeout_ms))
++#define rtw_write_port_cancel(adapter) _rtw_write_port_cancel((adapter))
++#endif //DBG_IO
++
++extern void rtw_write_scsi(_adapter *adapter, u32 cnt, u8 *pmem);
++
++//ioreq 
++extern void ioreq_read8(_adapter *adapter, u32 addr, u8 *pval);
++extern void ioreq_read16(_adapter *adapter, u32 addr, u16 *pval);	
++extern void ioreq_read32(_adapter *adapter, u32 addr, u32 *pval);
++extern void ioreq_write8(_adapter *adapter, u32 addr, u8 val);
++extern void ioreq_write16(_adapter *adapter, u32 addr, u16 val);
++extern void ioreq_write32(_adapter *adapter, u32 addr, u32 val);
++
++
++extern uint async_read8(_adapter *adapter, u32 addr, u8 *pbuff,
++	void (*_async_io_callback)(_adapter *padater, struct io_req *pio_req, u8 *cnxt), u8 *cnxt); 
++extern uint async_read16(_adapter *adapter, u32 addr,  u8 *pbuff,
++	void (*_async_io_callback)(_adapter *padater, struct io_req *pio_req, u8 *cnxt), u8 *cnxt); 
++extern uint async_read32(_adapter *adapter, u32 addr,  u8 *pbuff,
++	void (*_async_io_callback)(_adapter *padater, struct io_req *pio_req, u8 *cnxt), u8 *cnxt); 
++
++extern void async_read_mem(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
++extern void async_read_port(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
++
++extern void async_write8(_adapter *adapter, u32 addr, u8 val,
++	void (*_async_io_callback)(_adapter *padater, struct io_req *pio_req, u8 *cnxt), u8 *cnxt);
++extern void async_write16(_adapter *adapter, u32 addr, u16 val,
++	void (*_async_io_callback)(_adapter *padater, struct io_req *pio_req, u8 *cnxt), u8 *cnxt);
++extern void async_write32(_adapter *adapter, u32 addr, u32 val,
++	void (*_async_io_callback)(_adapter *padater, struct io_req *pio_req, u8 *cnxt), u8 *cnxt);
++
++extern void async_write_mem(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
++extern void async_write_port(_adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
++
++
++int rtw_init_io_priv(_adapter *padapter, void (*set_intf_ops)(struct _io_ops *pops));
++
++
++extern uint alloc_io_queue(_adapter *adapter);
++extern void free_io_queue(_adapter *adapter);
++extern void async_bus_io(struct io_queue *pio_q);
++extern void bus_sync_io(struct io_queue *pio_q);
++extern u32 _ioreq2rwmem(struct io_queue *pio_q);
++extern void dev_power_down(_adapter * Adapter, u8 bpwrup);
++
++/*
++#define RTL_R8(reg)		rtw_read8(padapter, reg)
++#define RTL_R16(reg)            rtw_read16(padapter, reg)
++#define RTL_R32(reg)            rtw_read32(padapter, reg)
++#define RTL_W8(reg, val8)       rtw_write8(padapter, reg, val8)
++#define RTL_W16(reg, val16)     rtw_write16(padapter, reg, val16)
++#define RTL_W32(reg, val32)     rtw_write32(padapter, reg, val32)
++*/
++
++/*
++#define RTL_W8_ASYNC(reg, val8) rtw_write32_async(padapter, reg, val8)
++#define RTL_W16_ASYNC(reg, val16) rtw_write32_async(padapter, reg, val16)
++#define RTL_W32_ASYNC(reg, val32) rtw_write32_async(padapter, reg, val32)
++
++#define RTL_WRITE_BB(reg, val32)	phy_SetUsbBBReg(padapter, reg, val32)
++#define RTL_READ_BB(reg)	phy_QueryUsbBBReg(padapter, reg)
++*/
++
++#endif	//_RTL8711_IO_H_
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_iol.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_iol.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_iol.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_iol.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,89 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __RTW_IOL_H_
++#define __RTW_IOL_H_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++
++typedef struct _io_offload_cmd {
++	u8 rsvd0;
++	u8 cmd;
++	u16 address;
++	u32 value;
++} IO_OFFLOAD_CMD, IOL_CMD;
++
++#define IOL_CMD_LLT			0x00
++//#define IOL_CMD_R_EFUSE	0x01
++#define IOL_CMD_WB_REG		0x02
++#define IOL_CMD_WW_REG 	0x03
++#define IOL_CMD_WD_REG		0x04
++//#define IOL_CMD_W_RF		0x05
++#define IOL_CMD_DELAY_US	0x80
++#define IOL_CMD_DELAY_MS	0x81
++//#define IOL_CMD_DELAY_S	0x82
++#define IOL_CMD_END			0x83
++
++/*****************************************************
++CMD					Address			Value
++(B1)					(B2/B3:H/L addr)	(B4:B7 : MSB:LSB)
++******************************************************
++IOL_CMD_LLT			-				B7: PGBNDY
++//IOL_CMD_R_EFUSE	-				-
++IOL_CMD_WB_REG		0x0~0xFFFF		B7
++IOL_CMD_WW_REG	0x0~0xFFFF		B6~B7
++IOL_CMD_WD_REG	0x0~0xFFFF		B4~B7
++//IOL_CMD_W_RF		RF Reg			B5~B7
++IOL_CMD_DELAY_US	-				B6~B7
++IOL_CMD_DELAY_MS	-				B6~B7
++//IOL_CMD_DELAY_S	-				B6~B7
++IOL_CMD_END		-				-
++******************************************************/
++
++struct xmit_frame	*rtw_IOL_accquire_xmit_frame(ADAPTER *adapter);
++int rtw_IOL_append_cmds(struct xmit_frame *xmit_frame, u8 *IOL_cmds, u32 cmd_len);
++int rtw_IOL_append_LLT_cmd(struct xmit_frame *xmit_frame, u8 page_boundary);
++int _rtw_IOL_append_WB_cmd(struct xmit_frame *xmit_frame, u16 addr, u8 value);
++int _rtw_IOL_append_WW_cmd(struct xmit_frame *xmit_frame, u16 addr, u16 value);
++int _rtw_IOL_append_WD_cmd(struct xmit_frame *xmit_frame, u16 addr, u32 value);
++int rtw_IOL_append_DELAY_US_cmd(struct xmit_frame *xmit_frame, u16 us);
++int rtw_IOL_append_DELAY_MS_cmd(struct xmit_frame *xmit_frame, u16 ms);
++int rtw_IOL_append_END_cmd(struct xmit_frame *xmit_frame);
++int rtw_IOL_exec_cmds_sync(ADAPTER *adapter, struct xmit_frame *xmit_frame, u32 max_wating_ms);
++int rtw_IOL_exec_cmd_array_sync(PADAPTER adapter, u8 *IOL_cmds, u32 cmd_num, u32 max_wating_ms);
++int rtw_IOL_exec_empty_cmds_sync(ADAPTER *adapter, u32 max_wating_ms);
++
++#ifdef DBG_IO
++int dbg_rtw_IOL_append_WB_cmd(struct xmit_frame *xmit_frame, u16 addr, u8 value, const char *caller, const int line);
++int dbg_rtw_IOL_append_WW_cmd(struct xmit_frame *xmit_frame, u16 addr, u16 value, const char *caller, const int line);
++int dbg_rtw_IOL_append_WD_cmd(struct xmit_frame *xmit_frame, u16 addr, u32 value, const char *caller, const int line);
++#define rtw_IOL_append_WB_cmd(xmit_frame, addr, value) dbg_rtw_IOL_append_WB_cmd((xmit_frame), (addr), (value), __FUNCTION__, __LINE__)
++#define rtw_IOL_append_WW_cmd(xmit_frame, addr, value) dbg_rtw_IOL_append_WW_cmd((xmit_frame), (addr), (value), __FUNCTION__, __LINE__)
++#define rtw_IOL_append_WD_cmd(xmit_frame, addr, value) dbg_rtw_IOL_append_WD_cmd((xmit_frame), (addr), (value), __FUNCTION__, __LINE__)
++#else
++#define rtw_IOL_append_WB_cmd(xmit_frame, addr, value) _rtw_IOL_append_WB_cmd((xmit_frame), (addr), (value))
++#define rtw_IOL_append_WW_cmd(xmit_frame, addr, value) _rtw_IOL_append_WW_cmd((xmit_frame), (addr), (value))
++#define rtw_IOL_append_WD_cmd(xmit_frame, addr, value) _rtw_IOL_append_WD_cmd((xmit_frame), (addr), (value))
++#endif
++
++bool rtw_IOL_applied(ADAPTER *adapter);
++
++#endif //__RTW_IOL_H_
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_led.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_led.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_led.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_led.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,217 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __RTW_LED_H_
++#define __RTW_LED_H_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++
++#define MSECS(t)        (HZ * ((t) / 1000) + (HZ * ((t) % 1000)) / 1000)
++
++typedef enum _LED_CTL_MODE{
++        LED_CTL_POWER_ON = 1,
++        LED_CTL_LINK = 2,
++        LED_CTL_NO_LINK = 3,
++        LED_CTL_TX = 4,
++        LED_CTL_RX = 5,
++        LED_CTL_SITE_SURVEY = 6,
++        LED_CTL_POWER_OFF = 7,
++        LED_CTL_START_TO_LINK = 8,
++        LED_CTL_START_WPS = 9,
++        LED_CTL_STOP_WPS = 10,
++        LED_CTL_START_WPS_BOTTON = 11, //added for runtop
++        LED_CTL_STOP_WPS_FAIL = 12, //added for ALPHA	
++	 LED_CTL_STOP_WPS_FAIL_OVERLAP = 13, //added for BELKIN
++}LED_CTL_MODE;
++
++
++#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI)
++//================================================================================
++// LED object.
++//================================================================================
++
++typedef enum _LED_STATE_871x{
++	LED_UNKNOWN = 0,
++	RTW_LED_ON = 1,
++	RTW_LED_OFF = 2,
++	LED_BLINK_NORMAL = 3,
++	LED_BLINK_SLOWLY = 4,
++	LED_POWER_ON_BLINK = 5,
++	LED_SCAN_BLINK = 6, // LED is blinking during scanning period, the # of times to blink is depend on time for scanning.
++	LED_NO_LINK_BLINK = 7, // LED is blinking during no link state.
++	LED_BLINK_StartToBlink = 8,// Customzied for Sercomm Printer Server case
++	LED_BLINK_WPS = 9,	// LED is blinkg during WPS communication	
++	LED_TXRX_BLINK = 10,
++	LED_BLINK_WPS_STOP = 11,	//for ALPHA	
++	LED_BLINK_WPS_STOP_OVERLAP = 12,	//for BELKIN
++}LED_STATE_871x;
++
++#define IS_LED_WPS_BLINKING(_LED_871x)	(((PLED_871x)_LED_871x)->CurrLedState==LED_BLINK_WPS \
++					|| ((PLED_871x)_LED_871x)->CurrLedState==LED_BLINK_WPS_STOP \
++					|| ((PLED_871x)_LED_871x)->bLedWPSBlinkInProgress)
++
++#define IS_LED_BLINKING(_LED_871x) 	(((PLED_871x)_LED_871x)->bLedWPSBlinkInProgress \
++					||((PLED_871x)_LED_871x)->bLedScanBlinkInProgress)
++
++typedef enum _LED_PIN_871x{
++	LED_PIN_GPIO0,
++	LED_PIN_LED0,
++	LED_PIN_LED1
++}LED_PIN_871x;
++
++typedef struct _LED_871x{
++	_adapter				*padapter;
++	LED_PIN_871x		LedPin;	// Identify how to implement this SW led.
++	LED_STATE_871x		CurrLedState; // Current LED state.
++	u8					bLedOn; // true if LED is ON, false if LED is OFF.
++
++	u8					bSWLedCtrl;
++
++	u8					bLedBlinkInProgress; // true if it is blinking, false o.w..
++	// ALPHA, added by chiyoko, 20090106
++	u8					bLedNoLinkBlinkInProgress;
++	u8					bLedLinkBlinkInProgress;
++	u8					bLedStartToLinkBlinkInProgress;
++	u8					bLedScanBlinkInProgress;
++	u8					bLedWPSBlinkInProgress;
++	
++	u32					BlinkTimes; // Number of times to toggle led state for blinking.
++	LED_STATE_871x		BlinkingLedState; // Next state for blinking, either RTW_LED_ON or RTW_LED_OFF are.
++
++	_timer				BlinkTimer; // Timer object for led blinking.
++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)|| defined PLATFORM_FREEBSD
++	_workitem			BlinkWorkItem; // Workitem used by BlinkTimer to manipulate H/W to blink LED.
++#endif
++} LED_871x, *PLED_871x;
++
++
++//================================================================================
++// LED customization.
++//================================================================================
++
++typedef	enum _LED_STRATEGY_871x{
++	SW_LED_MODE0, // SW control 1 LED via GPIO0. It is default option.
++	SW_LED_MODE1, // 2 LEDs, through LED0 and LED1. For ALPHA.
++	SW_LED_MODE2, // SW control 1 LED via GPIO0, customized for AzWave 8187 minicard.
++	SW_LED_MODE3, // SW control 1 LED via GPIO0, customized for Sercomm Printer Server case.
++	SW_LED_MODE4, //for Edimax / Belkin
++	SW_LED_MODE5, //for Sercomm / Belkin
++	SW_LED_MODE6, //for 88CU minicard, porting from ce SW_LED_MODE7
++	HW_LED, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes, see MAC.CONFIG1 for details.)
++}LED_STRATEGY_871x, *PLED_STRATEGY_871x;
++#endif //CONFIG_USB_HCI
++
++#ifdef CONFIG_PCI_HCI
++//================================================================================
++// LED object.
++//================================================================================
++
++typedef	enum _LED_STATE_871x{
++	LED_UNKNOWN = 0,
++	RTW_LED_ON = 1,
++	RTW_LED_OFF = 2,
++	LED_BLINK_NORMAL = 3,
++	LED_BLINK_SLOWLY = 4,
++	LED_POWER_ON_BLINK = 5,
++	LED_SCAN_BLINK = 6, // LED is blinking during scanning period, the # of times to blink is depend on time for scanning.
++	LED_NO_LINK_BLINK = 7, // LED is blinking during no link state.
++	LED_BLINK_StartToBlink = 8, 
++	LED_BLINK_TXRX = 9,
++	LED_BLINK_RUNTOP = 10, // Customized for RunTop
++	LED_BLINK_CAMEO = 11,
++}LED_STATE_871x;
++
++typedef enum _LED_PIN_871x{
++	LED_PIN_GPIO0,
++	LED_PIN_LED0,
++	LED_PIN_LED1,
++	LED_PIN_LED2
++}LED_PIN_871x;
++
++typedef struct _LED_871x{
++	_adapter				*padapter;
++
++	LED_PIN_871x		LedPin;	// Identify how to implement this SW led.
++
++	LED_STATE_871x		CurrLedState; // Current LED state.
++	u8					bLedOn; // TRUE if LED is ON, FALSE if LED is OFF.
++
++	u8					bLedBlinkInProgress; // TRUE if it is blinking, FALSE o.w..
++	u8					bLedWPSBlinkInProgress; // TRUE if it is blinking, FALSE o.w..
++
++	u8					bLedSlowBlinkInProgress;//added by vivi, for led new mode
++	u32					BlinkTimes; // Number of times to toggle led state for blinking.
++	LED_STATE_871x		BlinkingLedState; // Next state for blinking, either RTW_LED_ON or RTW_LED_OFF are.
++
++	_timer				BlinkTimer; // Timer object for led blinking.
++	
++	u8					bLedLinkBlinkInProgress;
++	u8					bLedNoLinkBlinkInProgress;
++	u8 					bLedScanBlinkInProgress;
++} LED_871x, *PLED_871x;
++
++
++//================================================================================
++// LED customization.
++//================================================================================
++
++typedef	enum _LED_STRATEGY_871x{
++	SW_LED_MODE0, // SW control 1 LED via GPIO0. It is default option.
++	SW_LED_MODE1, // SW control for PCI Express
++	SW_LED_MODE2, // SW control for Cameo.
++	SW_LED_MODE3, // SW contorl for RunTop.
++	SW_LED_MODE4, // SW control for Netcore
++	SW_LED_MODE5, //added by vivi, for led new mode, DLINK
++	SW_LED_MODE6, //added by vivi, for led new mode, PRONET
++	SW_LED_MODE7, //added by chiyokolin, for Lenovo, PCI Express Minicard Spec Rev.1.2 spec
++	SW_LED_MODE8, //added by chiyokolin, for QMI
++	SW_LED_MODE9, //added by chiyokolin, for BITLAND, PCI Express Minicard Spec Rev.1.1 
++	SW_LED_MODE10, //added by chiyokolin, for Edimax-ASUS
++	HW_LED, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes)
++}LED_STRATEGY_871x, *PLED_STRATEGY_871x;
++
++#define LED_CM8_BLINK_INTERVAL		500	//for QMI
++#endif //CONFIG_PCI_HCI
++
++struct led_priv{
++	/* add for led controll */
++	LED_871x			SwLed0;
++	LED_871x			SwLed1;
++	LED_STRATEGY_871x	LedStrategy;
++	u8					bRegUseLed;
++	void (*LedControlHandler)(_adapter *padapter, LED_CTL_MODE LedAction);
++	/* add for led controll */
++};
++
++#ifdef CONFIG_SW_LED
++#define rtw_led_control(adapter, LedAction) \
++	do { \
++		if((adapter)->ledpriv.LedControlHandler) \
++			(adapter)->ledpriv.LedControlHandler((adapter), (LedAction)); \
++	} while(0)
++#else //CONFIG_SW_LED
++#define rtw_led_control(adapter, LedAction)
++#endif //CONFIG_SW_LED
++
++extern void BlinkHandler(PLED_871x	 pLed);
++
++#endif //__RTW_LED_H_
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_mlme_ext.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_mlme_ext.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_mlme_ext.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_mlme_ext.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,963 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __RTW_MLME_EXT_H_
++#define __RTW_MLME_EXT_H_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <wlan_bssdef.h>
++
++
++//	Commented by Albert 20101105
++//	Increase the SURVEY_TO value from 100 to 150  ( 100ms to 150ms )
++//	The Realtek 8188CE SoftAP will spend around 100ms to send the probe response after receiving the probe request.
++//	So, this driver tried to extend the dwell time for each scanning channel.
++//	This will increase the chance to receive the probe response from SoftAP.
++
++#define SURVEY_TO		(100)
++#define REAUTH_TO		(300) //(50)
++#define REASSOC_TO		(300) //(50)
++//#define DISCONNECT_TO	(3000)
++#define ADDBA_TO			(2000)
++
++#define LINKED_TO (1) //unit:2 sec, 1x2=2 sec
++
++#define REAUTH_LIMIT	(4)
++#define REASSOC_LIMIT	(4)
++#define READDBA_LIMIT	(2)
++
++//#define	IOCMD_REG0		0x10250370		 	
++//#define	IOCMD_REG1		0x10250374
++//#define	IOCMD_REG2		0x10250378
++
++//#define	FW_DYNAMIC_FUN_SWITCH	0x10250364
++
++//#define	WRITE_BB_CMD		0xF0000001
++//#define	SET_CHANNEL_CMD	0xF3000000
++//#define	UPDATE_RA_CMD	0xFD0000A2
++
++#define	DYNAMIC_FUNC_DISABLE		(0x0)
++#define	DYNAMIC_FUNC_DIG			BIT(0)
++#define	DYNAMIC_FUNC_HP			BIT(1)
++#define	DYNAMIC_FUNC_SS			BIT(2) //Tx Power Tracking
++#define DYNAMIC_FUNC_BT			BIT(3)
++#define DYNAMIC_FUNC_ANT_DIV		BIT(4)
++#define DYNAMIC_FUNC_ADAPTIVITY	BIT(5)
++
++#define _HW_STATE_NOLINK_		0x00
++#define _HW_STATE_ADHOC_		0x01
++#define _HW_STATE_STATION_ 	0x02
++#define _HW_STATE_AP_			0x03
++
++
++#define		_1M_RATE_	0
++#define		_2M_RATE_	1
++#define		_5M_RATE_	2
++#define		_11M_RATE_	3
++#define		_6M_RATE_	4
++#define		_9M_RATE_	5
++#define		_12M_RATE_	6
++#define		_18M_RATE_	7
++#define		_24M_RATE_	8
++#define		_36M_RATE_	9
++#define		_48M_RATE_	10
++#define		_54M_RATE_	11
++
++
++extern unsigned char RTW_WPA_OUI[];
++extern unsigned char WMM_OUI[];
++extern unsigned char WPS_OUI[];
++extern unsigned char WFD_OUI[];
++extern unsigned char P2P_OUI[];
++
++extern unsigned char WMM_INFO_OUI[];
++extern unsigned char WMM_PARA_OUI[];
++
++
++//
++// Channel Plan Type.
++// Note: 
++//	We just add new channel plan when the new channel plan is different from any of the following 
++//	channel plan. 
++//	If you just wnat to customize the acitions(scan period or join actions) about one of the channel plan,
++//	customize them in RT_CHANNEL_INFO in the RT_CHANNEL_LIST.
++// 
++typedef enum _RT_CHANNEL_DOMAIN
++{
++	//===== old channel plan mapping =====//
++	RT_CHANNEL_DOMAIN_FCC = 0x00,
++	RT_CHANNEL_DOMAIN_IC = 0x01,
++	RT_CHANNEL_DOMAIN_ETSI = 0x02,
++	RT_CHANNEL_DOMAIN_SPAIN = 0x03,
++	RT_CHANNEL_DOMAIN_FRANCE = 0x04,
++	RT_CHANNEL_DOMAIN_MKK = 0x05,
++	RT_CHANNEL_DOMAIN_MKK1 = 0x06,
++	RT_CHANNEL_DOMAIN_ISRAEL = 0x07,
++	RT_CHANNEL_DOMAIN_TELEC = 0x08,
++	RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN = 0x09,
++	RT_CHANNEL_DOMAIN_WORLD_WIDE_13 = 0x0A,
++	RT_CHANNEL_DOMAIN_TAIWAN = 0x0B,
++	RT_CHANNEL_DOMAIN_CHINA = 0x0C,
++	RT_CHANNEL_DOMAIN_SINGAPORE_INDIA_MEXICO = 0x0D,
++	RT_CHANNEL_DOMAIN_KOREA = 0x0E,
++	RT_CHANNEL_DOMAIN_TURKEY = 0x0F,
++	RT_CHANNEL_DOMAIN_JAPAN = 0x10,
++	RT_CHANNEL_DOMAIN_FCC_NO_DFS = 0x11,
++	RT_CHANNEL_DOMAIN_JAPAN_NO_DFS = 0x12,
++	RT_CHANNEL_DOMAIN_WORLD_WIDE_5G = 0x13,
++	RT_CHANNEL_DOMAIN_TAIWAN_NO_DFS = 0x14,	
++
++	//===== new channel plan mapping, (2GDOMAIN_5GDOMAIN) =====//
++	RT_CHANNEL_DOMAIN_WORLD_NULL = 0x20,
++	RT_CHANNEL_DOMAIN_ETSI1_NULL = 0x21,
++	RT_CHANNEL_DOMAIN_FCC1_NULL = 0x22,
++	RT_CHANNEL_DOMAIN_MKK1_NULL = 0x23,
++	RT_CHANNEL_DOMAIN_ETSI2_NULL = 0x24,
++	RT_CHANNEL_DOMAIN_FCC1_FCC1 = 0x25,
++	RT_CHANNEL_DOMAIN_WORLD_ETSI1 = 0x26,
++	RT_CHANNEL_DOMAIN_MKK1_MKK1 = 0x27,
++	RT_CHANNEL_DOMAIN_WORLD_KCC1 = 0x28,
++	RT_CHANNEL_DOMAIN_WORLD_FCC2 = 0x29,
++	RT_CHANNEL_DOMAIN_WORLD_FCC3 = 0x30,
++	RT_CHANNEL_DOMAIN_WORLD_FCC4 = 0x31,
++	RT_CHANNEL_DOMAIN_WORLD_FCC5 = 0x32,
++	RT_CHANNEL_DOMAIN_WORLD_FCC6 = 0x33,
++	RT_CHANNEL_DOMAIN_FCC1_FCC7 = 0x34,
++	RT_CHANNEL_DOMAIN_WORLD_ETSI2 = 0x35,
++	RT_CHANNEL_DOMAIN_WORLD_ETSI3 = 0x36,
++	RT_CHANNEL_DOMAIN_MKK1_MKK2 = 0x37,
++	RT_CHANNEL_DOMAIN_MKK1_MKK3 = 0x38,
++	RT_CHANNEL_DOMAIN_FCC1_NCC1 = 0x39,
++	RT_CHANNEL_DOMAIN_FCC1_NCC2 = 0x40,
++
++	//===== Add new channel plan above this line===============//
++	RT_CHANNEL_DOMAIN_MAX,
++	RT_CHANNEL_DOMAIN_REALTEK_DEFINE = 0x7F,
++}RT_CHANNEL_DOMAIN, *PRT_CHANNEL_DOMAIN;
++
++typedef enum _RT_CHANNEL_DOMAIN_2G
++{
++	RT_CHANNEL_DOMAIN_2G_WORLD = 0x00,		//Worldwird 13
++	RT_CHANNEL_DOMAIN_2G_ETSI1 = 0x01,		//Europe
++	RT_CHANNEL_DOMAIN_2G_FCC1 = 0x02,		//US
++	RT_CHANNEL_DOMAIN_2G_MKK1 = 0x03,		//Japan
++	RT_CHANNEL_DOMAIN_2G_ETSI2 = 0x04,		//France
++	RT_CHANNEL_DOMAIN_2G_NULL = 0x05,
++	//===== Add new channel plan above this line===============//
++	RT_CHANNEL_DOMAIN_2G_MAX,
++}RT_CHANNEL_DOMAIN_2G, *PRT_CHANNEL_DOMAIN_2G;
++
++typedef enum _RT_CHANNEL_DOMAIN_5G
++{
++	RT_CHANNEL_DOMAIN_5G_NULL = 0x00,
++	RT_CHANNEL_DOMAIN_5G_ETSI1 = 0x01,		//Europe
++	RT_CHANNEL_DOMAIN_5G_ETSI2 = 0x02,		//Australia, New Zealand
++	RT_CHANNEL_DOMAIN_5G_ETSI3 = 0x03,		//Russia
++	RT_CHANNEL_DOMAIN_5G_FCC1 = 0x04,		//US
++	RT_CHANNEL_DOMAIN_5G_FCC2 = 0x05,		//FCC o/w DFS Channels
++	RT_CHANNEL_DOMAIN_5G_FCC3 = 0x06,		//India, Mexico
++	RT_CHANNEL_DOMAIN_5G_FCC4 = 0x07,		//Venezuela
++	RT_CHANNEL_DOMAIN_5G_FCC5 = 0x08,		//China
++	RT_CHANNEL_DOMAIN_5G_FCC6 = 0x09,		//Israel
++	RT_CHANNEL_DOMAIN_5G_FCC7_IC1 = 0x0A,	//US, Canada
++	RT_CHANNEL_DOMAIN_5G_KCC1 = 0x0B,		//Korea
++	RT_CHANNEL_DOMAIN_5G_MKK1 = 0x0C,		//Japan
++	RT_CHANNEL_DOMAIN_5G_MKK2 = 0x0D,		//Japan (W52, W53)
++	RT_CHANNEL_DOMAIN_5G_MKK3 = 0x0E,		//Japan (W56)
++	RT_CHANNEL_DOMAIN_5G_NCC1 = 0x0F,		//Taiwan
++	RT_CHANNEL_DOMAIN_5G_NCC2 = 0x10,		//Taiwan o/w DFS
++	//===== Add new channel plan above this line===============//
++	//===== Driver Self Defined =====//
++	RT_CHANNEL_DOMAIN_5G_FCC = 0x11,
++	RT_CHANNEL_DOMAIN_5G_JAPAN_NO_DFS = 0x12,
++	RT_CHANNEL_DOMAIN_5G_FCC4_NO_DFS = 0x13,
++	RT_CHANNEL_DOMAIN_5G_MAX,
++}RT_CHANNEL_DOMAIN_5G, *PRT_CHANNEL_DOMAIN_5G;
++
++#define rtw_is_channel_plan_valid(chplan) (chplan<RT_CHANNEL_DOMAIN_MAX || chplan == RT_CHANNEL_DOMAIN_REALTEK_DEFINE)
++
++typedef struct _RT_CHANNEL_PLAN
++{
++	unsigned char	Channel[MAX_CHANNEL_NUM];
++	unsigned char	Len;
++}RT_CHANNEL_PLAN, *PRT_CHANNEL_PLAN;
++
++typedef struct _RT_CHANNEL_PLAN_2G
++{
++	unsigned char	Channel[MAX_CHANNEL_NUM_2G];
++	unsigned char	Len;
++}RT_CHANNEL_PLAN_2G, *PRT_CHANNEL_PLAN_2G;
++
++typedef struct _RT_CHANNEL_PLAN_5G
++{
++	unsigned char	Channel[MAX_CHANNEL_NUM_5G];
++	unsigned char	Len;
++}RT_CHANNEL_PLAN_5G, *PRT_CHANNEL_PLAN_5G;
++
++typedef struct _RT_CHANNEL_PLAN_MAP
++{
++	unsigned char	Index2G;
++	unsigned char	Index5G;
++}RT_CHANNEL_PLAN_MAP, *PRT_CHANNEL_PLAN_MAP;
++
++enum Associated_AP
++{
++	atherosAP	= 0,
++	broadcomAP	= 1,
++	ciscoAP		= 2,
++	marvellAP	= 3,
++	ralinkAP	= 4,
++	realtekAP	= 5,
++	airgocapAP 	= 6,
++	unknownAP	= 7,
++	maxAP,
++};
++
++enum SCAN_STATE
++{
++	SCAN_DISABLE = 0,
++	SCAN_START = 1,
++	SCAN_TXNULL = 2,
++	SCAN_PROCESS = 3,
++	SCAN_COMPLETE = 4,
++	SCAN_STATE_MAX,
++};
++
++struct mlme_handler {
++	unsigned int   num;
++	char* str;
++	unsigned int (*func)(_adapter *padapter, union recv_frame *precv_frame);
++};
++
++struct action_handler {
++	unsigned int   num;
++	char* str;
++	unsigned int (*func)(_adapter *padapter, union recv_frame *precv_frame);
++};
++
++struct	ss_res	
++{
++	int	state;
++	int	bss_cnt;
++	int	channel_idx;
++	int	scan_mode;
++	u8 ssid_num;
++	u8 ch_num;
++	NDIS_802_11_SSID ssid[RTW_SSID_SCAN_AMOUNT];
++	struct rtw_ieee80211_channel ch[RTW_CHANNEL_SCAN_AMOUNT];
++};
++
++//#define AP_MODE				0x0C
++//#define STATION_MODE	0x08
++//#define AD_HOC_MODE		0x04
++//#define NO_LINK_MODE	0x00
++
++#define 	WIFI_FW_NULL_STATE			_HW_STATE_NOLINK_
++#define	WIFI_FW_STATION_STATE		_HW_STATE_STATION_
++#define	WIFI_FW_AP_STATE				_HW_STATE_AP_
++#define	WIFI_FW_ADHOC_STATE			_HW_STATE_ADHOC_
++
++#define	WIFI_FW_AUTH_NULL			0x00000100
++#define	WIFI_FW_AUTH_STATE			0x00000200
++#define	WIFI_FW_AUTH_SUCCESS			0x00000400
++
++#define	WIFI_FW_ASSOC_STATE			0x00002000
++#define	WIFI_FW_ASSOC_SUCCESS		0x00004000
++
++#define	WIFI_FW_LINKING_STATE		(WIFI_FW_AUTH_NULL | WIFI_FW_AUTH_STATE | WIFI_FW_AUTH_SUCCESS |WIFI_FW_ASSOC_STATE)
++
++#ifdef CONFIG_TDLS
++// 1: Write RCR DATA BIT
++// 2: Issue peer traffic indication
++// 3: Go back to the channel linked with AP, terminating channel switch procedure
++// 4: Init channel sensing, receive all data and mgnt frame
++// 5: Channel sensing and report candidate channel
++// 6: First time set channel to off channel
++// 7: Go back tp the channel linked with AP when set base channel as target channel
++// 8: Set channel back to base channel
++// 9: Set channel back to off channel
++// 10: Restore RCR DATA BIT
++// 11: Check alive
++// 12: Check alive
++// 13: Free TDLS sta
++enum TDLS_option
++{
++	TDLS_WRCR			= 	1,
++	TDLS_SD_PTI		= 	2,
++	TDLS_CS_OFF		= 	3,
++	TDLS_INIT_CH_SEN	= 	4,
++	TDLS_DONE_CH_SEN	=	5,
++	TDLS_OFF_CH		=	6,
++	TDLS_BASE_CH 		=	7,
++	TDLS_P_OFF_CH		=	8,
++	TDLS_P_BASE_CH	= 	9,
++	TDLS_RS_RCR		=	10,
++	TDLS_CKALV_PH1	=	11,
++	TDLS_CKALV_PH2	=	12,
++	TDLS_FREE_STA		=	13,
++	maxTDLS,
++};
++
++#endif //CONFIG_TDLS
++
++struct FW_Sta_Info
++{
++	struct sta_info	*psta;
++	u32	status;
++	u32	rx_pkt;
++	u32	retry;
++	NDIS_802_11_RATES_EX  SupportedRates;
++};
++
++/*
++ * Usage:
++ * When one iface acted as AP mode and the other iface is STA mode and scanning, 
++ * it should switch back to AP's operating channel periodically.
++ * Parameters info:
++ * When the driver scanned RTW_SCAN_NUM_OF_CH channels, it would switch back to AP's operating channel for
++ * RTW_STAY_AP_CH_MILLISECOND * SURVEY_TO milliseconds.
++ * Example:
++ * For chip supports 2.4G + 5GHz and AP mode is operating in channel 1, 
++ * RTW_SCAN_NUM_OF_CH is 8, RTW_STAY_AP_CH_MILLISECOND is 3 and SURVEY_TO is 100.
++ * When it's STA mode gets set_scan command, 
++ * it would 
++ * 1. Doing the scan on channel 1.2.3.4.5.6.7.8 
++ * 2. Back to channel 1 for 300 milliseconds
++ * 3. Go through doing site survey on channel 9.10.11.36.40.44.48.52
++ * 4. Back to channel 1 for 300 milliseconds
++ * 5. ... and so on, till survey done.
++ */
++#if defined CONFIG_STA_MODE_SCAN_UNDER_AP_MODE && defined CONFIG_CONCURRENT_MODE
++#define RTW_SCAN_NUM_OF_CH			8
++#define RTW_STAY_AP_CH_MILLISECOND	3	// this value is a multiplier,for example, when this value is 3, it would stay AP's op ch for 
++											// 3 * SURVEY_TO millisecond. 
++#endif //defined CONFIG_STA_MODE_SCAN_UNDER_AP_MODE && defined CONFIG_CONCURRENT_MODE
++
++struct mlme_ext_info
++{
++	u32	state;
++	u32	reauth_count;
++	u32	reassoc_count;
++	u32	link_count;
++	u32	auth_seq;
++	u32	auth_algo;	// 802.11 auth, could be open, shared, auto
++	u32	authModeToggle;
++	u32	enc_algo;//encrypt algorithm;
++	u32	key_index;	// this is only valid for legendary wep, 0~3 for key id.
++	u32	iv;
++	u8	chg_txt[128];
++	u16	aid;
++	u16	bcn_interval;
++	u16	capability;
++	u8	assoc_AP_vendor;
++	u8	slotTime;
++	u8	preamble_mode;
++	u8	WMM_enable;
++	u8	ERP_enable;
++	u8	ERP_IE;
++	u8	HT_enable;
++	u8	HT_caps_enable;	
++	u8	HT_info_enable;
++	u8	HT_protection;
++	u8	turboMode_cts2self;
++	u8	turboMode_rtsen;
++	u8	SM_PS;
++	u8	agg_enable_bitmap;
++	u8	ADDBA_retry_count;
++	u8	candidate_tid_bitmap;
++	u8	dialogToken;
++	// Accept ADDBA Request
++	BOOLEAN bAcceptAddbaReq;
++	u8	bwmode_updated;
++	u8	hidden_ssid_mode;
++
++	struct ADDBA_request		ADDBA_req;
++	struct WMM_para_element	WMM_param;
++	struct HT_caps_element	HT_caps;
++	struct HT_info_element		HT_info;
++	WLAN_BSSID_EX			network;//join network or bss_network, if in ap mode, it is the same to cur_network.network
++	struct FW_Sta_Info		FW_sta_info[NUM_STA];
++
++#ifdef CONFIG_STA_MODE_SCAN_UNDER_AP_MODE
++	u8 scan_cnt;
++#endif //CONFIG_STA_MODE_SCAN_UNDER_AP_MODE
++};
++
++// The channel information about this channel including joining, scanning, and power constraints.
++typedef struct _RT_CHANNEL_INFO
++{
++	u8				ChannelNum;		// The channel number.
++	RT_SCAN_TYPE	ScanType;		// Scan type such as passive or active scan.
++	//u16				ScanPeriod;		// Listen time in millisecond in this channel.
++	//s32				MaxTxPwrDbm;	// Max allowed tx power.
++	//u32				ExInfo;			// Extended Information for this channel.
++#ifdef CONFIG_FIND_BEST_CHANNEL
++	u32				rx_count;
++#endif
++}RT_CHANNEL_INFO, *PRT_CHANNEL_INFO;
++
++int rtw_ch_set_search_ch(RT_CHANNEL_INFO *ch_set, const u32 ch);
++bool rtw_mlme_band_check(_adapter *adapter, const u32 ch);
++
++// P2P_MAX_REG_CLASSES - Maximum number of regulatory classes
++#define P2P_MAX_REG_CLASSES 10
++
++// P2P_MAX_REG_CLASS_CHANNELS - Maximum number of channels per regulatory class
++#define P2P_MAX_REG_CLASS_CHANNELS 20
++
++//  struct p2p_channels - List of supported channels
++struct p2p_channels {
++	// struct p2p_reg_class - Supported regulatory class
++	struct p2p_reg_class {
++		// reg_class - Regulatory class (IEEE 802.11-2007, Annex J)
++		u8 reg_class;
++
++		// channel - Supported channels
++		u8 channel[P2P_MAX_REG_CLASS_CHANNELS];
++
++		// channels - Number of channel entries in use
++		size_t channels;
++	} reg_class[P2P_MAX_REG_CLASSES];
++
++	// reg_classes - Number of reg_class entries in use
++	size_t reg_classes;
++};
++
++struct p2p_oper_class_map {
++	enum hw_mode {IEEE80211G,IEEE80211A} mode;
++	u8 op_class;
++	u8 min_chan;
++	u8 max_chan;
++	u8 inc;
++	enum { BW20, BW40PLUS, BW40MINUS } bw;
++};
++
++struct mlme_ext_priv
++{
++	_adapter	*padapter;
++	u8	mlmeext_init;
++	ATOMIC_T		event_seq;
++	u16	mgnt_seq;
++#ifdef CONFIG_IEEE80211W
++	u16	sa_query_seq;
++	u64 mgnt_80211w_IPN;
++	u64 mgnt_80211w_IPN_rx;
++#endif //CONFIG_IEEE80211W
++	//struct fw_priv 	fwpriv;
++	
++	unsigned char	cur_channel;
++	unsigned char	cur_bwmode;
++	unsigned char	cur_ch_offset;//PRIME_CHNL_OFFSET
++	unsigned char	cur_wireless_mode;	
++
++	unsigned char	max_chan_nums;
++	RT_CHANNEL_INFO		channel_set[MAX_CHANNEL_NUM];
++	struct p2p_channels channel_list;
++	unsigned char	basicrate[NumRates];
++	unsigned char	datarate[NumRates];
++	
++	struct ss_res		sitesurvey_res;		
++	struct mlme_ext_info	mlmext_info;//for sta/adhoc mode, including current scanning/connecting/connected related info.
++                                                     //for ap mode, network includes ap's cap_info
++	_timer		survey_timer;
++	_timer		link_timer;
++#ifdef CONFIG_IEEE80211W
++	_timer		sa_query_timer;
++#endif //CONFIG_IEEE80211W
++	//_timer		ADDBA_timer;
++	u16			chan_scan_time;
++
++	u8	scan_abort;
++	u8	tx_rate; // TXRATE when USERATE is set.
++
++	u32	retry; //retry for issue probereq
++	
++	u64 TSFValue;
++
++#ifdef CONFIG_AP_MODE	
++	unsigned char bstart_bss;
++#endif
++
++	//recv_decache check for Action_public frame
++        u8 action_public_dialog_token;
++	u16 	 action_public_rxseq;
++
++#ifdef CONFIG_80211D
++	u8 update_channel_plan_by_ap_done;
++#endif
++
++#ifdef CONFIG_ACTIVE_KEEP_ALIVE_CHECK
++	u8 active_keep_alive_check;
++#endif
++	
++};
++
++int init_mlme_ext_priv(_adapter* padapter);
++int init_hw_mlme_ext(_adapter *padapter);
++void free_mlme_ext_priv (struct mlme_ext_priv *pmlmeext);
++extern void init_mlme_ext_timer(_adapter *padapter);
++extern void init_addba_retry_timer(_adapter *padapter, struct sta_info *psta);
++extern struct xmit_frame *alloc_mgtxmitframe(struct xmit_priv *pxmitpriv);
++struct xmit_frame *alloc_mgtxmitframe_once(struct xmit_priv *pxmitpriv);
++
++//void fill_fwpriv(_adapter * padapter, struct fw_priv *pfwpriv);
++
++unsigned char networktype_to_raid(unsigned char network_type);
++int judge_network_type(_adapter *padapter, unsigned char *rate, int ratelen);
++void get_rate_set(_adapter *padapter, unsigned char *pbssrate, int *bssrate_len);
++void UpdateBrateTbl(_adapter *padapter,u8 *mBratesOS);
++void UpdateBrateTblForSoftAP(u8 *bssrateset, u32 bssratelen);
++void change_band_update_ie(_adapter *padapter, WLAN_BSSID_EX *pnetwork);
++
++void Save_DM_Func_Flag(_adapter *padapter);
++void Restore_DM_Func_Flag(_adapter *padapter);
++void Switch_DM_Func(_adapter *padapter, u8 mode, u8 enable);
++
++//void Set_NETYPE1_MSR(_adapter *padapter, u8 type);
++//void Set_NETYPE0_MSR(_adapter *padapter, u8 type);
++void Set_MSR(_adapter *padapter, u8 type);
++
++u8 rtw_get_oper_ch(_adapter *adapter);
++void rtw_set_oper_ch(_adapter *adapter, u8 ch);
++u8 rtw_get_oper_bw(_adapter *adapter);
++void rtw_set_oper_bw(_adapter *adapter, u8 bw);
++u8 rtw_get_oper_choffset(_adapter *adapter);
++void rtw_set_oper_choffset(_adapter *adapter, u8 offset);
++u32 rtw_get_on_oper_ch_time(_adapter *adapter);
++u32 rtw_get_on_cur_ch_time(_adapter *adapter);
++
++void set_channel_bwmode(_adapter *padapter, unsigned char channel, unsigned char channel_offset, unsigned short bwmode);
++void SelectChannel(_adapter *padapter, unsigned char channel);
++void SetBWMode(_adapter *padapter, unsigned short bwmode, unsigned char channel_offset);
++
++unsigned int decide_wait_for_beacon_timeout(unsigned int bcn_interval);
++
++void write_cam(_adapter *padapter, u8 entry, u16 ctrl, u8 *mac, u8 *key);
++void clear_cam_entry(_adapter *padapter, u8 entry);
++
++void invalidate_cam_all(_adapter *padapter);
++void CAM_empty_entry(PADAPTER Adapter, u8 ucIndex);
++
++
++int allocate_fw_sta_entry(_adapter *padapter);
++void flush_all_cam_entry(_adapter *padapter);
++
++BOOLEAN IsLegal5GChannel(PADAPTER Adapter, u8 channel);
++
++void site_survey(_adapter *padapter);
++u8 collect_bss_info(_adapter *padapter, union recv_frame *precv_frame, WLAN_BSSID_EX *bssid);
++
++int get_bsstype(unsigned short capability);
++u8* get_my_bssid(WLAN_BSSID_EX *pnetwork);
++u16 get_beacon_interval(WLAN_BSSID_EX *bss);
++
++int is_client_associated_to_ap(_adapter *padapter);
++int is_client_associated_to_ibss(_adapter *padapter);
++int is_IBSS_empty(_adapter *padapter);
++
++unsigned char check_assoc_AP(u8 *pframe, uint len);
++
++int WMM_param_handler(_adapter *padapter, PNDIS_802_11_VARIABLE_IEs	pIE);
++#ifdef CONFIG_WFD
++int WFD_info_handler(_adapter *padapter, PNDIS_802_11_VARIABLE_IEs	pIE);
++#endif
++void WMMOnAssocRsp(_adapter *padapter);
++
++void HT_caps_handler(_adapter *padapter, PNDIS_802_11_VARIABLE_IEs pIE);
++void HT_info_handler(_adapter *padapter, PNDIS_802_11_VARIABLE_IEs pIE);
++void HTOnAssocRsp(_adapter *padapter);
++
++void ERP_IE_handler(_adapter *padapter, PNDIS_802_11_VARIABLE_IEs pIE);
++void VCS_update(_adapter *padapter, struct sta_info *psta);
++
++void update_beacon_info(_adapter *padapter, u8 *pframe, uint len, struct sta_info *psta);
++#ifdef CONFIG_DFS
++void process_csa_ie(_adapter *padapter, u8 *pframe, uint len);
++#endif //CONFIG_DFS
++void update_IOT_info(_adapter *padapter);
++void update_capinfo(PADAPTER Adapter, u16 updateCap);
++void update_wireless_mode(_adapter * padapter);
++void update_tx_basic_rate(_adapter *padapter, u8 modulation);
++void update_bmc_sta_support_rate(_adapter *padapter, u32 mac_id);
++int update_sta_support_rate(_adapter *padapter, u8* pvar_ie, uint var_ie_len, int cam_idx);
++
++//for sta/adhoc mode
++void update_sta_info(_adapter *padapter, struct sta_info *psta);
++unsigned int update_basic_rate(unsigned char *ptn, unsigned int ptn_sz);
++unsigned int update_supported_rate(unsigned char *ptn, unsigned int ptn_sz);
++unsigned int update_MSC_rate(struct HT_caps_element *pHT_caps);
++void Update_RA_Entry(_adapter *padapter, u32 mac_id);
++void set_sta_rate(_adapter *padapter, struct sta_info *psta);
++
++unsigned int receive_disconnect(_adapter *padapter, unsigned char *MacAddr, unsigned short reason);
++
++unsigned char get_highest_rate_idx(u32 mask);
++int support_short_GI(_adapter *padapter, struct HT_caps_element *pHT_caps);
++unsigned int is_ap_in_tkip(_adapter *padapter);
++
++
++void report_join_res(_adapter *padapter, int res);
++void report_survey_event(_adapter *padapter, union recv_frame *precv_frame);
++void report_surveydone_event(_adapter *padapter);
++void report_del_sta_event(_adapter *padapter, unsigned char* MacAddr, unsigned short reason);
++void report_add_sta_event(_adapter *padapter, unsigned char* MacAddr, int cam_idx);
++
++void beacon_timing_control(_adapter *padapter);
++extern u8 set_tx_beacon_cmd(_adapter*padapter);
++unsigned int setup_beacon_frame(_adapter *padapter, unsigned char *beacon_frame);
++void update_mgnt_tx_rate(_adapter *padapter, u8 rate);
++void update_mgntframe_attrib(_adapter *padapter, struct pkt_attrib *pattrib);
++void dump_mgntframe(_adapter *padapter, struct xmit_frame *pmgntframe);
++s32 dump_mgntframe_and_wait(_adapter *padapter, struct xmit_frame *pmgntframe, int timeout_ms);
++s32 dump_mgntframe_and_wait_ack(_adapter *padapter, struct xmit_frame *pmgntframe);
++
++#ifdef CONFIG_P2P
++void issue_probersp_p2p(_adapter *padapter, unsigned char *da);
++void issue_p2p_provision_request( _adapter *padapter, u8* pssid, u8 ussidlen, u8* pdev_raddr);
++void issue_p2p_GO_request(_adapter *padapter, u8* raddr);
++void issue_probereq_p2p(_adapter *padapter, u8 *da);
++int issue_probereq_p2p_ex(_adapter *adapter, u8 *da, int try_cnt, int wait_ms);
++void issue_p2p_invitation_response(_adapter *padapter, u8* raddr, u8 dialogToken, u8 success);
++void issue_p2p_invitation_request(_adapter *padapter, u8* raddr );
++#endif //CONFIG_P2P
++void issue_beacon(_adapter *padapter);
++void issue_probersp(_adapter *padapter, unsigned char *da, u8 is_valid_p2p_probereq);
++void issue_assocreq(_adapter *padapter);
++void issue_asocrsp(_adapter *padapter, unsigned short status, struct sta_info *pstat, int pkt_type);
++void issue_auth(_adapter *padapter, struct sta_info *psta, unsigned short status);
++void issue_probereq(_adapter *padapter, NDIS_802_11_SSID *pssid, u8 *da);
++s32 issue_probereq_ex(_adapter *padapter, NDIS_802_11_SSID *pssid, u8* da, int try_cnt, int wait_ms);
++int issue_nulldata(_adapter *padapter, unsigned char *da, unsigned int power_mode, int try_cnt, int wait_ms);
++int issue_qos_nulldata(_adapter *padapter, unsigned char *da, u16 tid, int try_cnt, int wait_ms);
++int issue_deauth(_adapter *padapter, unsigned char *da, unsigned short reason);
++int issue_deauth_ex(_adapter *padapter, u8 *da, unsigned short reason, int try_cnt, int wait_ms);
++void issue_action_spct_ch_switch(_adapter *padapter, u8 *ra, u8 new_ch, u8 ch_offset);
++void issue_action_BA(_adapter *padapter, unsigned char *raddr, unsigned char action, unsigned short status);
++#ifdef CONFIG_IEEE80211W
++void issue_action_SA_Query(_adapter *padapter, unsigned char *raddr, unsigned char action, unsigned short tid);
++#endif //CONFIG_IEEE80211W
++unsigned int send_delba(_adapter *padapter, u8 initiator, u8 *addr);
++unsigned int send_beacon(_adapter *padapter);
++
++void start_clnt_assoc(_adapter *padapter);
++void start_clnt_auth(_adapter* padapter);
++void start_clnt_join(_adapter* padapter);
++void start_create_ibss(_adapter* padapter);
++
++unsigned int OnAssocReq(_adapter *padapter, union recv_frame *precv_frame);
++unsigned int OnAssocRsp(_adapter *padapter, union recv_frame *precv_frame);
++unsigned int OnProbeReq(_adapter *padapter, union recv_frame *precv_frame);
++unsigned int OnProbeRsp(_adapter *padapter, union recv_frame *precv_frame);
++unsigned int DoReserved(_adapter *padapter, union recv_frame *precv_frame);
++unsigned int OnBeacon(_adapter *padapter, union recv_frame *precv_frame);
++unsigned int OnAtim(_adapter *padapter, union recv_frame *precv_frame);
++unsigned int OnDisassoc(_adapter *padapter, union recv_frame *precv_frame);
++unsigned int OnAuth(_adapter *padapter, union recv_frame *precv_frame);
++unsigned int OnAuthClient(_adapter *padapter, union recv_frame *precv_frame);
++unsigned int OnDeAuth(_adapter *padapter, union recv_frame *precv_frame);
++unsigned int OnAction(_adapter *padapter, union recv_frame *precv_frame);
++
++unsigned int on_action_spct(_adapter *padapter, union recv_frame *precv_frame);
++unsigned int OnAction_qos(_adapter *padapter, union recv_frame *precv_frame);
++unsigned int OnAction_dls(_adapter *padapter, union recv_frame *precv_frame);
++unsigned int OnAction_back(_adapter *padapter, union recv_frame *precv_frame);
++unsigned int on_action_public(_adapter *padapter, union recv_frame *precv_frame);
++unsigned int OnAction_ht(_adapter *padapter, union recv_frame *precv_frame);
++#ifdef CONFIG_IEEE80211W
++unsigned int OnAction_sa_query(_adapter *padapter, union recv_frame *precv_frame);
++#endif //CONFIG_IEEE80211W
++unsigned int OnAction_wmm(_adapter *padapter, union recv_frame *precv_frame);
++unsigned int OnAction_p2p(_adapter *padapter, union recv_frame *precv_frame);
++
++
++void mlmeext_joinbss_event_callback(_adapter *padapter, int join_res);
++void mlmeext_sta_del_event_callback(_adapter *padapter);
++void mlmeext_sta_add_event_callback(_adapter *padapter, struct sta_info *psta);
++
++void linked_status_chk(_adapter *padapter);
++
++void survey_timer_hdl (_adapter *padapter);
++void link_timer_hdl (_adapter *padapter);
++void addba_timer_hdl(struct sta_info *psta);
++#ifdef CONFIG_IEEE80211W
++void sa_query_timer_hdl(_adapter *padapter);
++#endif //CONFIG_IEEE80211W
++//void reauth_timer_hdl(_adapter *padapter);
++//void reassoc_timer_hdl(_adapter *padapter);
++
++#define set_survey_timer(mlmeext, ms) \
++	do { \
++		/*DBG_871X("%s set_survey_timer(%p, %d)\n", __FUNCTION__, (mlmeext), (ms));*/ \
++		_set_timer(&(mlmeext)->survey_timer, (ms)); \
++	} while(0)
++
++#define set_link_timer(mlmeext, ms) \
++	do { \
++		/*DBG_871X("%s set_link_timer(%p, %d)\n", __FUNCTION__, (mlmeext), (ms));*/ \
++		_set_timer(&(mlmeext)->link_timer, (ms)); \
++	} while(0)
++#ifdef CONFIG_IEEE80211W
++#define set_sa_query_timer(mlmeext, ms) \
++	do { \
++		DBG_871X("%s set_sa_query_timer(%p, %d)\n", __FUNCTION__, (mlmeext), (ms)); \
++		_set_timer(&(mlmeext)->sa_query_timer, (ms)); \
++	} while(0)
++#endif //CONFIG_IEEE80211W
++extern int cckrates_included(unsigned char *rate, int ratelen);
++extern int cckratesonly_included(unsigned char *rate, int ratelen);
++
++extern void process_addba_req(_adapter *padapter, u8 *paddba_req, u8 *addr);
++
++extern void update_TSF(struct mlme_ext_priv *pmlmeext, u8 *pframe, uint len);
++extern void correct_TSF(_adapter *padapter, struct mlme_ext_priv *pmlmeext);
++
++
++#ifdef CONFIG_CONCURRENT_MODE
++ sint check_buddy_mlmeinfo_state(_adapter *padapter, u32 state);
++void concurrent_chk_joinbss_done(_adapter *padapter, int join_res);
++#endif //CONFIG_CONCURRENT_MODE
++
++#ifdef CONFIG_DUALMAC_CONCURRENT
++void	dc_SelectChannel(_adapter *padapter, unsigned char channel);
++void	dc_SetBWMode(_adapter *padapter, unsigned short bwmode, unsigned char channel_offset);
++void	dc_set_channel_bwmode_disconnect(_adapter *padapter);
++u8	dc_handle_join_request(_adapter *padapter);
++void	dc_handle_join_done(_adapter *padapter, u8 join_res);
++sint	dc_check_fwstate(_adapter *padapter, sint fw_state);
++u8	dc_handle_site_survey(_adapter *padapter);
++void	dc_report_survey_event(_adapter *padapter, union recv_frame *precv_frame);
++void	dc_set_channel_bwmode_survey_done(_adapter *padapter);
++void	dc_set_ap_channel_bandwidth(_adapter *padapter, u8 channel, u8 channel_offset, u8 bwmode);
++void	dc_resume_xmit(_adapter *padapter);
++u8	dc_check_xmit(_adapter *padapter);
++#endif
++
++int rtw_chk_start_clnt_join(_adapter *padapter);
++int rtw_get_ch_setting_union(_adapter *adapter, u8 *ch, u8 *bw, u8 *offset);
++
++struct cmd_hdl {
++	uint	parmsize;
++	u8 (*h2cfuns)(struct _ADAPTER *padapter, u8 *pbuf);	
++};
++
++
++u8 read_macreg_hdl(_adapter *padapter, u8 *pbuf);
++u8 write_macreg_hdl(_adapter *padapter, u8 *pbuf);
++u8 read_bbreg_hdl(_adapter *padapter, u8 *pbuf);
++u8 write_bbreg_hdl(_adapter *padapter, u8 *pbuf);
++u8 read_rfreg_hdl(_adapter *padapter, u8 *pbuf);
++u8 write_rfreg_hdl(_adapter *padapter, u8 *pbuf);
++
++
++u8 NULL_hdl(_adapter *padapter, u8 *pbuf);
++u8 join_cmd_hdl(_adapter *padapter, u8 *pbuf);
++u8 disconnect_hdl(_adapter *padapter, u8 *pbuf);
++u8 createbss_hdl(_adapter *padapter, u8 *pbuf);
++u8 setopmode_hdl(_adapter *padapter, u8 *pbuf);
++u8 sitesurvey_cmd_hdl(_adapter *padapter, u8 *pbuf);	
++u8 setauth_hdl(_adapter *padapter, u8 *pbuf);
++u8 setkey_hdl(_adapter *padapter, u8 *pbuf);
++u8 set_stakey_hdl(_adapter *padapter, u8 *pbuf);
++u8 set_assocsta_hdl(_adapter *padapter, u8 *pbuf);
++u8 del_assocsta_hdl(_adapter *padapter, u8 *pbuf);
++u8 add_ba_hdl(_adapter *padapter, unsigned char *pbuf);
++
++u8 mlme_evt_hdl(_adapter *padapter, unsigned char *pbuf);
++u8 h2c_msg_hdl(_adapter *padapter, unsigned char *pbuf);
++u8 tx_beacon_hdl(_adapter *padapter, unsigned char *pbuf);
++u8 set_ch_hdl(_adapter *padapter, u8 *pbuf);
++u8 set_chplan_hdl(_adapter *padapter, unsigned char *pbuf);
++u8 led_blink_hdl(_adapter *padapter, unsigned char *pbuf);
++u8 set_csa_hdl(_adapter *padapter, unsigned char *pbuf);	//Kurt: Handling DFS channel switch announcement ie.
++u8 tdls_hdl(_adapter *padapter, unsigned char *pbuf);
++
++
++#define GEN_DRV_CMD_HANDLER(size, cmd)	{size, &cmd ## _hdl},
++#define GEN_MLME_EXT_HANDLER(size, cmd)	{size, cmd},
++
++#ifdef _RTW_CMD_C_
++
++struct cmd_hdl wlancmds[] = 
++{
++	GEN_DRV_CMD_HANDLER(0, NULL) /*0*/
++	GEN_DRV_CMD_HANDLER(0, NULL)
++	GEN_DRV_CMD_HANDLER(0, NULL)
++	GEN_DRV_CMD_HANDLER(0, NULL)
++	GEN_DRV_CMD_HANDLER(0, NULL)
++	GEN_DRV_CMD_HANDLER(0, NULL)
++	GEN_MLME_EXT_HANDLER(0, NULL)
++	GEN_MLME_EXT_HANDLER(0, NULL)
++	GEN_MLME_EXT_HANDLER(0, NULL)
++	GEN_MLME_EXT_HANDLER(0, NULL)
++	GEN_MLME_EXT_HANDLER(0, NULL) /*10*/
++	GEN_MLME_EXT_HANDLER(0, NULL)
++	GEN_MLME_EXT_HANDLER(0, NULL)
++	GEN_MLME_EXT_HANDLER(0, NULL)		
++	GEN_MLME_EXT_HANDLER(sizeof (struct joinbss_parm), join_cmd_hdl) /*14*/
++	GEN_MLME_EXT_HANDLER(sizeof (struct disconnect_parm), disconnect_hdl)
++	GEN_MLME_EXT_HANDLER(sizeof (struct createbss_parm), createbss_hdl)
++	GEN_MLME_EXT_HANDLER(sizeof (struct setopmode_parm), setopmode_hdl)
++	GEN_MLME_EXT_HANDLER(sizeof (struct sitesurvey_parm), sitesurvey_cmd_hdl) /*18*/
++	GEN_MLME_EXT_HANDLER(sizeof (struct setauth_parm), setauth_hdl)
++	GEN_MLME_EXT_HANDLER(sizeof (struct setkey_parm), setkey_hdl) /*20*/
++	GEN_MLME_EXT_HANDLER(sizeof (struct set_stakey_parm), set_stakey_hdl)
++	GEN_MLME_EXT_HANDLER(sizeof (struct set_assocsta_parm), NULL)
++	GEN_MLME_EXT_HANDLER(sizeof (struct del_assocsta_parm), NULL)
++	GEN_MLME_EXT_HANDLER(sizeof (struct setstapwrstate_parm), NULL)
++	GEN_MLME_EXT_HANDLER(sizeof (struct setbasicrate_parm), NULL)
++	GEN_MLME_EXT_HANDLER(sizeof (struct getbasicrate_parm), NULL)
++	GEN_MLME_EXT_HANDLER(sizeof (struct setdatarate_parm), NULL)
++	GEN_MLME_EXT_HANDLER(sizeof (struct getdatarate_parm), NULL)
++	GEN_MLME_EXT_HANDLER(sizeof (struct setphyinfo_parm), NULL)
++	GEN_MLME_EXT_HANDLER(sizeof (struct getphyinfo_parm), NULL)  /*30*/
++	GEN_MLME_EXT_HANDLER(sizeof (struct setphy_parm), NULL)
++	GEN_MLME_EXT_HANDLER(sizeof (struct getphy_parm), NULL)
++	GEN_MLME_EXT_HANDLER(0, NULL)
++	GEN_MLME_EXT_HANDLER(0, NULL)
++	GEN_MLME_EXT_HANDLER(0, NULL)
++	GEN_MLME_EXT_HANDLER(0, NULL)
++	GEN_MLME_EXT_HANDLER(0, NULL)
++	GEN_MLME_EXT_HANDLER(0, NULL)
++	GEN_MLME_EXT_HANDLER(0, NULL)
++	GEN_MLME_EXT_HANDLER(0, NULL)	/*40*/
++	GEN_MLME_EXT_HANDLER(0, NULL)
++	GEN_MLME_EXT_HANDLER(0, NULL)
++	GEN_MLME_EXT_HANDLER(0, NULL)
++	GEN_MLME_EXT_HANDLER(0, NULL)
++	GEN_MLME_EXT_HANDLER(sizeof(struct addBaReq_parm), add_ba_hdl)	
++	GEN_MLME_EXT_HANDLER(sizeof(struct set_ch_parm), set_ch_hdl) /* 46 */
++	GEN_MLME_EXT_HANDLER(0, NULL)
++	GEN_MLME_EXT_HANDLER(0, NULL)
++	GEN_MLME_EXT_HANDLER(0, NULL)
++	GEN_MLME_EXT_HANDLER(0, NULL) /*50*/
++	GEN_MLME_EXT_HANDLER(0, NULL)
++	GEN_MLME_EXT_HANDLER(0, NULL)
++	GEN_MLME_EXT_HANDLER(0, NULL)
++	GEN_MLME_EXT_HANDLER(0, NULL) 
++	GEN_MLME_EXT_HANDLER(sizeof(struct Tx_Beacon_param), tx_beacon_hdl) /*55*/
++
++	GEN_MLME_EXT_HANDLER(0, mlme_evt_hdl) /*56*/
++	GEN_MLME_EXT_HANDLER(0, rtw_drvextra_cmd_hdl) /*57*/
++
++	GEN_MLME_EXT_HANDLER(0, h2c_msg_hdl) /*58*/
++	GEN_MLME_EXT_HANDLER(sizeof(struct SetChannelPlan_param), set_chplan_hdl) /*59*/
++	GEN_MLME_EXT_HANDLER(sizeof(struct LedBlink_param), led_blink_hdl) /*60*/
++	GEN_MLME_EXT_HANDLER(sizeof(struct SetChannelSwitch_param), set_csa_hdl) /*61*/
++	GEN_MLME_EXT_HANDLER(sizeof(struct TDLSoption_param), tdls_hdl) /*62*/
++};
++
++#endif
++
++struct C2HEvent_Header
++{
++
++#ifdef CONFIG_LITTLE_ENDIAN
++
++	unsigned int len:16;
++	unsigned int ID:8;
++	unsigned int seq:8;
++	
++#elif defined(CONFIG_BIG_ENDIAN)
++
++	unsigned int seq:8;
++	unsigned int ID:8;
++	unsigned int len:16;
++	
++#else
++
++#  error "Must be LITTLE or BIG Endian"
++
++#endif
++
++	unsigned int rsvd;
++
++};
++
++void rtw_dummy_event_callback(_adapter *adapter , u8 *pbuf);
++void rtw_fwdbg_event_callback(_adapter *adapter , u8 *pbuf);
++
++enum rtw_c2h_event
++{
++	GEN_EVT_CODE(_Read_MACREG)=0, /*0*/
++	GEN_EVT_CODE(_Read_BBREG),
++ 	GEN_EVT_CODE(_Read_RFREG),
++ 	GEN_EVT_CODE(_Read_EEPROM),
++ 	GEN_EVT_CODE(_Read_EFUSE),
++	GEN_EVT_CODE(_Read_CAM),			/*5*/
++ 	GEN_EVT_CODE(_Get_BasicRate),  
++ 	GEN_EVT_CODE(_Get_DataRate),   
++ 	GEN_EVT_CODE(_Survey),	 /*8*/
++ 	GEN_EVT_CODE(_SurveyDone),	 /*9*/
++ 	
++ 	GEN_EVT_CODE(_JoinBss) , /*10*/
++ 	GEN_EVT_CODE(_AddSTA),
++ 	GEN_EVT_CODE(_DelSTA),
++ 	GEN_EVT_CODE(_AtimDone) ,
++ 	GEN_EVT_CODE(_TX_Report),  
++	GEN_EVT_CODE(_CCX_Report),			/*15*/
++ 	GEN_EVT_CODE(_DTM_Report),
++ 	GEN_EVT_CODE(_TX_Rate_Statistics),
++ 	GEN_EVT_CODE(_C2HLBK), 
++ 	GEN_EVT_CODE(_FWDBG),
++	GEN_EVT_CODE(_C2HFEEDBACK),               /*20*/
++	GEN_EVT_CODE(_ADDBA),
++	GEN_EVT_CODE(_C2HBCN),
++	GEN_EVT_CODE(_ReportPwrState),		//filen: only for PCIE, USB	
++	GEN_EVT_CODE(_CloseRF),				//filen: only for PCIE, work around ASPM
++ 	MAX_C2HEVT
++};
++
++
++#ifdef _RTW_MLME_EXT_C_		
++
++static struct fwevent wlanevents[] = 
++{
++	{0, rtw_dummy_event_callback}, 	/*0*/
++	{0, NULL},
++	{0, NULL},
++	{0, NULL},
++	{0, NULL},
++	{0, NULL},
++	{0, NULL},
++	{0, NULL},
++	{0, &rtw_survey_event_callback},		/*8*/
++	{sizeof (struct surveydone_event), &rtw_surveydone_event_callback},	/*9*/
++		
++	{0, &rtw_joinbss_event_callback},		/*10*/
++	{sizeof(struct stassoc_event), &rtw_stassoc_event_callback},
++	{sizeof(struct stadel_event), &rtw_stadel_event_callback},	
++	{0, &rtw_atimdone_event_callback},
++	{0, rtw_dummy_event_callback},
++	{0, NULL},	/*15*/
++	{0, NULL},
++	{0, NULL},
++	{0, NULL},
++	{0, rtw_fwdbg_event_callback},
++	{0, NULL},	 /*20*/
++	{0, NULL},
++	{0, NULL},	
++	{0, &rtw_cpwm_event_callback},
++};
++
++#endif//_RTL8192C_CMD_C_
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_mlme.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_mlme.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_mlme.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_mlme.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,844 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __RTW_MLME_H_
++#define __RTW_MLME_H_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <mlme_osdep.h>
++#include <drv_types.h>
++#include <wlan_bssdef.h>
++
++#ifdef CONFIG_INTEL_WIDI
++#include <rtw_intel_widi.h>
++#endif
++
++#define	MAX_BSS_CNT	128
++//#define   MAX_JOIN_TIMEOUT	2000
++//#define   MAX_JOIN_TIMEOUT	2500
++#define   MAX_JOIN_TIMEOUT	6500
++
++//	Commented by Albert 20101105
++//	Increase the scanning timeout because of increasing the SURVEY_TO value.
++
++#define 	SCANNING_TIMEOUT 	8000
++
++#define	SCAN_INTERVAL	(30) // unit:2sec, 30*2=60sec
++
++#ifdef PALTFORM_OS_WINCE
++#define	SCANQUEUE_LIFETIME 12000000 // unit:us
++#else
++#define	SCANQUEUE_LIFETIME 20 // unit:sec
++#endif
++
++#define 	WIFI_NULL_STATE			0x00000000
++
++#define	WIFI_ASOC_STATE			0x00000001		// Under Linked state...
++#define 	WIFI_REASOC_STATE	       	0x00000002
++#define	WIFI_SLEEP_STATE			0x00000004
++#define	WIFI_STATION_STATE		0x00000008
++
++#define	WIFI_AP_STATE				0x00000010
++#define	WIFI_ADHOC_STATE			0x00000020
++#define   WIFI_ADHOC_MASTER_STATE 0x00000040
++#define   WIFI_UNDER_LINKING		0x00000080
++
++#define	WIFI_UNDER_WPS			0x00000100
++//#define	WIFI_UNDER_CMD			0x00000200
++//#define	WIFI_UNDER_P2P			0x00000400
++#define	WIFI_STA_ALIVE_CHK_STATE	0x00000400
++#define	WIFI_SITE_MONITOR			0x00000800		//to indicate the station is under site surveying
++
++#ifdef WDS
++#define	WIFI_WDS					0x00001000
++#define	WIFI_WDS_RX_BEACON		0x00002000		// already rx WDS AP beacon
++#endif
++#ifdef AUTO_CONFIG
++#define	WIFI_AUTOCONF				0x00004000
++#define	WIFI_AUTOCONF_IND		0x00008000
++#endif
++
++/*
++// ========== P2P Section Start ===============
++#define	WIFI_P2P_LISTEN_STATE		0x00010000
++#define	WIFI_P2P_GROUP_FORMATION_STATE		0x00020000
++// ========== P2P Section End ===============
++*/
++
++//#ifdef UNDER_MPTEST
++#define	WIFI_MP_STATE							0x00010000
++#define	WIFI_MP_CTX_BACKGROUND				0x00020000	// in continous tx background
++#define	WIFI_MP_CTX_ST						0x00040000	// in continous tx with single-tone
++#define	WIFI_MP_CTX_BACKGROUND_PENDING	0x00080000	// pending in continous tx background due to out of skb
++#define	WIFI_MP_CTX_CCK_HW					0x00100000	// in continous tx
++#define	WIFI_MP_CTX_CCK_CS					0x00200000	// in continous tx with carrier suppression
++#define   WIFI_MP_LPBK_STATE					0x00400000
++//#endif
++
++//#define _FW_UNDER_CMD		WIFI_UNDER_CMD
++#define _FW_UNDER_LINKING	WIFI_UNDER_LINKING
++#define _FW_LINKED			WIFI_ASOC_STATE
++#define _FW_UNDER_SURVEY	WIFI_SITE_MONITOR
++
++
++enum dot11AuthAlgrthmNum {
++ dot11AuthAlgrthm_Open = 0,
++ dot11AuthAlgrthm_Shared,
++ dot11AuthAlgrthm_8021X,
++ dot11AuthAlgrthm_Auto,
++ dot11AuthAlgrthm_MaxNum
++};
++
++// Scan type including active and passive scan.
++typedef enum _RT_SCAN_TYPE
++{
++	SCAN_PASSIVE,
++	SCAN_ACTIVE,
++	SCAN_MIX,
++}RT_SCAN_TYPE, *PRT_SCAN_TYPE;
++
++enum DriverInterface {
++	DRIVER_WEXT =  1,
++	DRIVER_CFG80211 = 2
++};
++
++enum  _BAND
++{
++	GHZ24_50 = 0,
++	GHZ_50,
++	GHZ_24,
++	GHZ_MAX,
++};
++
++#define rtw_band_valid(band) ((band) >= GHZ24_50 && (band) < GHZ_MAX)
++
++enum SCAN_RESULT_TYPE
++{
++	SCAN_RESULT_P2P_ONLY = 0,		//	Will return all the P2P devices.
++	SCAN_RESULT_ALL = 1,			//	Will return all the scanned device, include AP.
++	SCAN_RESULT_WFD_TYPE = 2		//	Will just return the correct WFD device.
++									//	If this device is Miracast sink device, it will just return all the Miracast source devices.
++};
++
++/*
++
++there are several "locks" in mlme_priv,
++since mlme_priv is a shared resource between many threads,
++like ISR/Call-Back functions, the OID handlers, and even timer functions.
++
++
++Each _queue has its own locks, already.
++Other items are protected by mlme_priv.lock.
++
++To avoid possible dead lock, any thread trying to modifiying mlme_priv
++SHALL not lock up more than one locks at a time!
++
++*/
++
++
++#define traffic_threshold	10
++#define	traffic_scan_period	500
++
++struct sitesurvey_ctrl {
++	u64	last_tx_pkts;
++	uint	last_rx_pkts;
++	sint	traffic_busy;
++	_timer	sitesurvey_ctrl_timer;
++};
++
++typedef struct _RT_LINK_DETECT_T{
++	u32				NumTxOkInPeriod;
++	u32				NumRxOkInPeriod;
++	u32				NumRxUnicastOkInPeriod;
++	BOOLEAN			bBusyTraffic;
++	BOOLEAN			bTxBusyTraffic;
++	BOOLEAN			bRxBusyTraffic;
++	BOOLEAN			bHigherBusyTraffic; // For interrupt migration purpose.
++	BOOLEAN			bHigherBusyRxTraffic; // We may disable Tx interrupt according as Rx traffic.
++	BOOLEAN			bHigherBusyTxTraffic; // We may disable Tx interrupt according as Tx traffic.
++}RT_LINK_DETECT_T, *PRT_LINK_DETECT_T;
++
++struct profile_info {
++	u8	ssidlen;
++	u8	ssid[ WLAN_SSID_MAXLEN ];
++	u8	peermac[ ETH_ALEN ];
++};
++
++struct tx_invite_req_info{
++	u8					token;
++	u8					benable;
++	u8					go_ssid[ WLAN_SSID_MAXLEN ];
++	u8					ssidlen;
++	u8					go_bssid[ ETH_ALEN ];
++	u8					peer_macaddr[ ETH_ALEN ];
++	u8					operating_ch;	//	This information will be set by using the p2p_set op_ch=x
++	u8					peer_ch;		//	The listen channel for peer P2P device
++
++};
++
++struct tx_invite_resp_info{
++	u8					token;	//	Used to record the dialog token of p2p invitation request frame.
++};
++
++#ifdef CONFIG_WFD
++
++struct wifi_display_info{
++	u16							wfd_enable;			//	Eanble/Disable the WFD function.
++	u16							rtsp_ctrlport;		//	TCP port number at which the this WFD device listens for RTSP messages
++	u16							peer_rtsp_ctrlport;	//	TCP port number at which the peer WFD device listens for RTSP messages
++													//	This filed should be filled when receiving the gropu negotiation request
++
++	u8							peer_session_avail;	//	WFD session is available or not for the peer wfd device.
++													//	This variable will be set when sending the provisioning discovery request to peer WFD device.
++													//	And this variable will be reset when it is read by using the iwpriv p2p_get wfd_sa command.
++
++	u8							ip_address[4];
++	u8							peer_ip_address[4];
++	u8							wfd_pc;				//	WFD preferred connection
++													//	0 -> Prefer to use the P2P for WFD connection on peer side.
++													//	1 -> Prefer to use the TDLS for WFD connection on peer side.
++											
++	u8							wfd_device_type;	//	WFD Device Type
++													//	0 -> WFD Source Device
++													//	1 -> WFD Primary Sink Device
++	enum	SCAN_RESULT_TYPE	scan_result_type;	//	Used when P2P is enable. This parameter will impact the scan result.
++};
++#endif //CONFIG_WFD
++
++struct tx_provdisc_req_info{
++	u16					wps_config_method_request;	//	Used when sending the provisioning request frame
++	u16					peer_channel_num[2];		//	The channel number which the receiver stands.
++	NDIS_802_11_SSID	ssid;
++	u8					peerDevAddr[ ETH_ALEN ];		//	Peer device address
++	u8					peerIFAddr[ ETH_ALEN ];		//	Peer interface address
++	u8					benable;					//	This provision discovery request frame is trigger to send or not
++};
++
++struct rx_provdisc_req_info{	//When peer device issue prov_disc_req first, we should store the following informations
++	u8					peerDevAddr[ ETH_ALEN ];		//	Peer device address
++	u8					strconfig_method_desc_of_prov_disc_req[4];	//	description for the config method located in the provisioning discovery request frame.	
++																	//	The UI must know this information to know which config method the remote p2p device is requiring.
++};
++
++struct tx_nego_req_info{
++	u16					peer_channel_num[2];		//	The channel number which the receiver stands.
++	u8					peerDevAddr[ ETH_ALEN ];		//	Peer device address
++	u8					benable;					//	This negoitation request frame is trigger to send or not
++};
++
++struct group_id_info{
++	u8					go_device_addr[ ETH_ALEN ];	//	The GO's device address of this P2P group
++	u8					ssid[ WLAN_SSID_MAXLEN ];	//	The SSID of this P2P group
++};
++
++struct scan_limit_info{
++	u8					scan_op_ch_only;			//	When this flag is set, the driver should just scan the operation channel
++#ifndef P2P_OP_CHECK_SOCIAL_CH
++	u8					operation_ch[2];				//	Store the operation channel of invitation request frame
++#else
++	u8					operation_ch[5];				//	Store additional channel 1,6,11  for Android 4.2 IOT & Nexus 4
++#endif //P2P_OP_CHECK_SOCIAL_CH
++};
++
++#ifdef CONFIG_IOCTL_CFG80211
++struct cfg80211_wifidirect_info{
++	_timer					remain_on_ch_timer;
++	u8						restore_channel;
++	struct ieee80211_channel	remain_on_ch_channel;
++	enum nl80211_channel_type	remain_on_ch_type;
++	u64						remain_on_ch_cookie;
++	bool is_ro_ch;
++};
++#endif //CONFIG_IOCTL_CFG80211
++
++struct wifidirect_info{
++	_adapter*				padapter;
++	_timer					find_phase_timer;
++	_timer					restore_p2p_state_timer;
++	
++	//	Used to do the scanning. After confirming the peer is availalble, the driver transmits the P2P frame to peer.
++	_timer					pre_tx_scan_timer;
++	_timer					reset_ch_sitesurvey;
++	_timer					reset_ch_sitesurvey2;	//	Just for resetting the scan limit function by using p2p nego
++#ifdef CONFIG_CONCURRENT_MODE
++	//	Used to switch the channel between legacy AP and listen state.
++	_timer					ap_p2p_switch_timer;
++#endif
++	struct tx_provdisc_req_info	tx_prov_disc_info;
++	struct rx_provdisc_req_info rx_prov_disc_info;
++	struct tx_invite_req_info	invitereq_info;
++	struct profile_info			profileinfo[ P2P_MAX_PERSISTENT_GROUP_NUM ];	//	Store the profile information of persistent group
++	struct tx_invite_resp_info	inviteresp_info;
++	struct tx_nego_req_info	nego_req_info;
++	struct group_id_info		groupid_info;	//	Store the group id information when doing the group negotiation handshake.
++	struct scan_limit_info		rx_invitereq_info;	//	Used for get the limit scan channel from the Invitation procedure
++	struct scan_limit_info		p2p_info;		//	Used for get the limit scan channel from the P2P negotiation handshake
++#ifdef CONFIG_WFD
++	struct wifi_display_info		*wfd_info;
++#endif	
++	enum P2P_ROLE			role;
++	enum P2P_STATE			pre_p2p_state;
++	enum P2P_STATE			p2p_state;
++	u8 						device_addr[ETH_ALEN];	//	The device address should be the mac address of this device.
++	u8						interface_addr[ETH_ALEN];
++	u8						social_chan[4];
++	u8						listen_channel;
++	u8						operating_channel;
++	u8						listen_dwell;		//	This value should be between 1 and 3
++	u8						support_rate[8];
++	u8						p2p_wildcard_ssid[P2P_WILDCARD_SSID_LEN];
++	u8						intent;		//	should only include the intent value.
++	u8						p2p_peer_interface_addr[ ETH_ALEN ];
++	u8						p2p_peer_device_addr[ ETH_ALEN ];
++	u8						peer_intent;	//	Included the intent value and tie breaker value.
++	u8						device_name[ WPS_MAX_DEVICE_NAME_LEN ];	//	Device name for displaying on searching device screen
++	u8						device_name_len;
++	u8						profileindex;	//	Used to point to the index of profileinfo array
++	u8						peer_operating_ch;
++	u8						find_phase_state_exchange_cnt;
++	u16						device_password_id_for_nego;	//	The device password ID for group negotation
++	u8						negotiation_dialog_token;
++	u8						nego_ssid[ WLAN_SSID_MAXLEN ];	//	SSID information for group negotitation
++	u8						nego_ssidlen;
++	u8 						p2p_group_ssid[WLAN_SSID_MAXLEN];
++	u8 						p2p_group_ssid_len;
++	u8						persistent_supported;		//	Flag to know the persistent function should be supported or not.
++														//	In the Sigma test, the Sigma will provide this enable from the sta_set_p2p CAPI.
++														//	0: disable
++														//	1: enable
++	u8						session_available;			//	Flag to set the WFD session available to enable or disable "by Sigma"
++														//	In the Sigma test, the Sigma will disable the session available by using the sta_preset CAPI.
++														//	0: disable
++														//	1: enable
++	u8						wfd_tdls_enable;			//	Flag to enable or disable the TDLS by WFD Sigma
++														//	0: disable
++														//	1: enable
++	u8						wfd_tdls_weaksec;			//	Flag to enable or disable the weak security function for TDLS by WFD Sigma
++														//	0: disable
++														//	In this case, the driver can't issue the tdsl setup request frame.
++														//	1: enable
++														//	In this case, the driver can issue the tdls setup request frame
++														//	even the current security is weak security.
++
++	enum	P2P_WPSINFO		ui_got_wps_info;			//	This field will store the WPS value (PIN value or PBC) that UI had got from the user.
++	u16						supported_wps_cm;			//	This field describes the WPS config method which this driver supported.
++														//	The value should be the combination of config method defined in page104 of WPS v2.0 spec.	
++	u8						external_uuid;				//  UUID flag
++	u8						uuid[16];					//  UUID
++	uint						channel_list_attr_len;		//	This field will contain the length of body of P2P Channel List attribute of group negotitation response frame.
++	u8						channel_list_attr[100];		//	This field will contain the body of P2P Channel List attribute of group negotitation response frame.
++														//	We will use the channel_cnt and channel_list fields when constructing the group negotitation confirm frame.
++	u8						driver_interface; 			// Indicate DRIVER_WEXT or DRIVER_CFG80211
++
++#ifdef CONFIG_CONCURRENT_MODE
++	u16						ext_listen_interval;	//	The interval to be available with legacy AP (ms)
++	u16						ext_listen_period;	//	The time period to be available for P2P listen state (ms)
++#endif
++#ifdef CONFIG_P2P_PS
++	enum P2P_PS_MODE		p2p_ps_mode; // indicate p2p ps mode
++	enum P2P_PS_STATE		p2p_ps_state; // indicate p2p ps state
++	u8						noa_index; // Identifies and instance of Notice of Absence timing.
++	u8						ctwindow; // Client traffic window. A period of time in TU after TBTT.
++	u8						opp_ps; // opportunistic power save.
++	u8						noa_num; // number of NoA descriptor in P2P IE.
++	u8						noa_count[P2P_MAX_NOA_NUM]; // Count for owner, Type of client.
++	u32						noa_duration[P2P_MAX_NOA_NUM]; // Max duration for owner, preferred or min acceptable duration for client.
++	u32						noa_interval[P2P_MAX_NOA_NUM]; // Length of interval for owner, preferred or max acceptable interval of client.
++	u32						noa_start_time[P2P_MAX_NOA_NUM]; // schedule expressed in terms of the lower 4 bytes of the TSF timer.
++#endif // CONFIG_P2P_PS
++};
++
++struct tdls_ss_record{	//signal strength record; recording the tdls sta with lowerest ss
++	u8		macaddr[ETH_ALEN];
++	u8		RxPWDBAll;
++	u8		is_tdls_sta;	// _TRUE: direct link sta, _FALSE: else
++};
++
++struct tdls_info{
++	u8					ap_prohibited;
++	uint					setup_state;
++	u8					sta_cnt;
++	u8					sta_maximum;	// 1:tdls sta is equal (NUM_STA-1), reach max direct link number; 0: else;
++	struct tdls_ss_record	ss_record;
++	u8					macid_index;	//macid entry that is ready to write
++	u8					clear_cam;	//cam entry that is trying to clear, using it in direct link teardown
++	u8					ch_sensing;
++	u8					cur_channel;
++	u8					candidate_ch;
++	u8					collect_pkt_num[MAX_CHANNEL_NUM];
++	_lock				cmd_lock;
++	_lock				hdl_lock;
++	u8					watchdog_count;
++	u8					dev_discovered;		//WFD_TDLS: for sigma test
++	u8					enable;
++#ifdef CONFIG_WFD
++	struct wifi_display_info		*wfd_info;
++#endif		
++};
++
++struct mlme_priv {
++
++	_lock	lock;
++	sint	fw_state;	//shall we protect this variable? maybe not necessarily...
++
++	u8	to_join; //flag
++	#ifdef CONFIG_LAYER2_ROAMING
++	u8 to_roaming; // roaming trying times
++	#endif
++
++	u8	*nic_hdl;
++
++	u8	not_indic_disco;
++	_list		*pscanned;
++	_queue	free_bss_pool;
++	_queue	scanned_queue;
++	u8		*free_bss_buf;
++	u32	num_of_scanned;
++
++	NDIS_802_11_SSID	assoc_ssid;
++	u8	assoc_bssid[6];
++
++	struct wlan_network	cur_network;
++
++	//uint wireless_mode; no used, remove it
++
++	u32	scan_interval;
++
++	_timer assoc_timer;
++
++	uint assoc_by_bssid;
++	uint assoc_by_rssi;
++
++	_timer scan_to_timer; // driver itself handles scan_timeout status.
++	u32 scan_start_time; // used to evaluate the time spent in scanning
++
++	#ifdef CONFIG_SET_SCAN_DENY_TIMER
++	_timer set_scan_deny_timer;
++	ATOMIC_T set_scan_deny; //0: allowed, 1: deny
++	#endif
++
++	struct qos_priv qospriv;
++
++#ifdef CONFIG_80211N_HT
++
++	/* Number of non-HT AP/stations */
++	int num_sta_no_ht;
++
++	/* Number of HT AP/stations 20 MHz */
++	//int num_sta_ht_20mhz; 
++
++
++	int num_FortyMHzIntolerant;
++
++	struct ht_priv	htpriv;
++
++#endif
++
++	RT_LINK_DETECT_T	LinkDetectInfo;
++	_timer	dynamic_chk_timer; //dynamic/periodic check timer
++
++	u8	acm_mask; // for wmm acm mask
++	u8	ChannelPlan;
++	RT_SCAN_TYPE 	scan_mode; // active: 1, passive: 0
++
++	//u8 probereq_wpsie[MAX_WPS_IE_LEN];//added in probe req	
++	//int probereq_wpsie_len;
++	u8 *wps_probe_req_ie;
++	u32 wps_probe_req_ie_len;
++
++#if defined (CONFIG_AP_MODE) && defined (CONFIG_NATIVEAP_MLME)
++	/* Number of associated Non-ERP stations (i.e., stations using 802.11b
++	 * in 802.11g BSS) */
++	int num_sta_non_erp;
++
++	/* Number of associated stations that do not support Short Slot Time */
++	int num_sta_no_short_slot_time;
++
++	/* Number of associated stations that do not support Short Preamble */
++	int num_sta_no_short_preamble;
++
++	int olbc; /* Overlapping Legacy BSS Condition */
++
++	/* Number of HT associated stations that do not support greenfield */
++	int num_sta_ht_no_gf;
++
++	/* Number of associated non-HT stations */
++	//int num_sta_no_ht;
++
++	/* Number of HT associated stations 20 MHz */
++	int num_sta_ht_20mhz;
++
++	/* Overlapping BSS information */
++	int olbc_ht;
++	
++#ifdef CONFIG_80211N_HT
++	u16 ht_op_mode;
++#endif /* CONFIG_80211N_HT */	
++
++	u8 *assoc_req;
++	u32 assoc_req_len;
++	u8 *assoc_rsp;
++	u32 assoc_rsp_len;
++
++	u8 *wps_beacon_ie;	
++	//u8 *wps_probe_req_ie;
++	u8 *wps_probe_resp_ie;
++	u8 *wps_assoc_resp_ie; // for CONFIG_IOCTL_CFG80211, this IE could include p2p ie / wfd ie
++
++	u32 wps_beacon_ie_len;
++	//u32 wps_probe_req_ie_len;
++	u32 wps_probe_resp_ie_len;
++	u32 wps_assoc_resp_ie_len; // for CONFIG_IOCTL_CFG80211, this IE len could include p2p ie / wfd ie
++	
++	u8 *p2p_beacon_ie;
++	u8 *p2p_probe_req_ie;
++	u8 *p2p_probe_resp_ie;	
++	u8 *p2p_go_probe_resp_ie; //for GO	
++	u8 *p2p_assoc_req_ie;
++
++	u32 p2p_beacon_ie_len;
++	u32 p2p_probe_req_ie_len;
++	u32 p2p_probe_resp_ie_len;
++	u32 p2p_go_probe_resp_ie_len; //for GO
++	u32 p2p_assoc_req_ie_len;
++/*
++#if defined(CONFIG_P2P) && defined(CONFIG_IOCTL_CFG80211)
++	//u8 *wps_p2p_beacon_ie;
++	u8 *p2p_beacon_ie;
++	u8 *wps_p2p_probe_resp_ie;
++	u8 *wps_p2p_assoc_resp_ie;
++	//u32 wps_p2p_beacon_ie_len;
++	u32 p2p_beacon_ie_len;
++	u32 wps_p2p_probe_resp_ie_len;
++	u32 wps_p2p_assoc_resp_ie_len;
++#endif
++*/
++	
++	_lock	bcn_update_lock;
++	u8		update_bcn;
++	
++	
++#endif //#if defined (CONFIG_AP_MODE) && defined (CONFIG_NATIVEAP_MLME)
++
++#if defined(CONFIG_WFD) && defined(CONFIG_IOCTL_CFG80211)
++	
++	u8 *wfd_beacon_ie;
++	u8 *wfd_probe_req_ie;
++	u8 *wfd_probe_resp_ie;	
++	u8 *wfd_go_probe_resp_ie; //for GO	
++	u8 *wfd_assoc_req_ie;
++
++	u32 wfd_beacon_ie_len;
++	u32 wfd_probe_req_ie_len;
++	u32 wfd_probe_resp_ie_len;
++	u32 wfd_go_probe_resp_ie_len; //for GO
++	u32 wfd_assoc_req_ie_len;
++
++#endif
++
++#ifdef RTK_DMP_PLATFORM
++	// DMP kobject_hotplug function  signal need in passive level
++	_workitem	Linkup_workitem;
++	_workitem	Linkdown_workitem;
++#endif
++
++#ifdef CONFIG_INTEL_WIDI
++	int	widi_state;
++	int	listen_state;
++	_timer	listen_timer;
++	ATOMIC_T	rx_probe_rsp; // 1:receive probe respone from RDS source.
++	u8	*l2sdTaBuffer;
++	u8	channel_idx;
++	s8	group_cnt;	//For WiDi 3.5, they specified another scan algo. for WFD/RDS co-existed
++	u8	sa_ext[L2SDTA_SERVICE_VE_LEN];
++
++	u8	widi_enable;
++	/**
++	 * For WiDi 4; upper layer would set
++	 * p2p_primary_device_type_category_id
++	 * p2p_primary_device_type_sub_category_id
++	 * p2p_secondary_device_type_category_id
++	 * p2p_secondary_device_type_sub_category_id
++	 */
++	u16	p2p_pdt_cid;
++	u16	p2p_pdt_scid;
++	u8	num_p2p_sdt;
++	u16	p2p_sdt_cid[MAX_NUM_P2P_SDT];
++	u16	p2p_sdt_scid[MAX_NUM_P2P_SDT];
++	u8	p2p_reject_disable;	//When starting NL80211 wpa_supplicant/hostapd, it will call netdev_close
++							//such that it will cause p2p disabled. Use this flag to reject.
++#endif // CONFIG_INTEL_WIDI
++
++#ifdef CONFIG_CONCURRENT_MODE
++	u8	scanning_via_buddy_intf;
++#endif
++};
++
++#ifdef CONFIG_AP_MODE
++
++struct hostapd_priv
++{
++	_adapter *padapter;
++
++#ifdef CONFIG_HOSTAPD_MLME
++	struct net_device *pmgnt_netdev;
++	struct usb_anchor anchored;
++#endif	
++	
++};
++
++extern int hostapd_mode_init(_adapter *padapter);
++extern void hostapd_mode_unload(_adapter *padapter);
++#endif
++
++
++extern void rtw_joinbss_event_prehandle(_adapter *adapter, u8 *pbuf);
++extern void rtw_survey_event_callback(_adapter *adapter, u8 *pbuf);
++extern void rtw_surveydone_event_callback(_adapter *adapter, u8 *pbuf);
++extern void rtw_joinbss_event_callback(_adapter *adapter, u8 *pbuf);
++extern void rtw_stassoc_event_callback(_adapter *adapter, u8 *pbuf);
++extern void rtw_stadel_event_callback(_adapter *adapter, u8 *pbuf);
++extern void rtw_atimdone_event_callback(_adapter *adapter, u8 *pbuf);
++extern void rtw_cpwm_event_callback(_adapter *adapter, u8 *pbuf);
++
++#ifdef PLATFORM_WINDOWS
++extern thread_return event_thread(void *context);
++
++extern void rtw_join_timeout_handler (
++	IN	PVOID					SystemSpecific1,
++	IN	PVOID					FunctionContext,
++	IN	PVOID					SystemSpecific2,
++	IN	PVOID					SystemSpecific3
++	);
++
++extern void _rtw_scan_timeout_handler (
++	IN	PVOID					SystemSpecific1,
++	IN	PVOID					FunctionContext,
++	IN	PVOID					SystemSpecific2,
++	IN	PVOID					SystemSpecific3
++	);
++
++#endif
++
++#if defined (PLATFORM_LINUX)|| defined (PLATFORM_FREEBSD)
++extern int event_thread(void *context);
++extern void rtw_join_timeout_handler(void* FunctionContext);
++extern void _rtw_scan_timeout_handler(void* FunctionContext);
++#endif
++
++extern void rtw_free_network_queue(_adapter *adapter,u8 isfreeall);
++extern int rtw_init_mlme_priv(_adapter *adapter);// (struct mlme_priv *pmlmepriv);
++
++extern void rtw_free_mlme_priv (struct mlme_priv *pmlmepriv);
++
++
++extern sint rtw_select_and_join_from_scanned_queue(struct mlme_priv *pmlmepriv);
++extern sint rtw_set_key(_adapter *adapter,struct security_priv *psecuritypriv,sint keyid, u8 set_tx);
++extern sint rtw_set_auth(_adapter *adapter,struct security_priv *psecuritypriv);
++
++__inline static u8 *get_bssid(struct mlme_priv *pmlmepriv)
++{	//if sta_mode:pmlmepriv->cur_network.network.MacAddress=> bssid
++	// if adhoc_mode:pmlmepriv->cur_network.network.MacAddress=> ibss mac address
++	return pmlmepriv->cur_network.network.MacAddress;
++}
++
++__inline static sint check_fwstate(struct mlme_priv *pmlmepriv, sint state)
++{
++	if (pmlmepriv->fw_state & state)
++		return _TRUE;
++
++	return _FALSE;
++}
++
++__inline static sint get_fwstate(struct mlme_priv *pmlmepriv)
++{
++	return pmlmepriv->fw_state;
++}
++
++/*
++ * No Limit on the calling context,
++ * therefore set it to be the critical section...
++ *
++ * ### NOTE:#### (!!!!)
++ * MUST TAKE CARE THAT BEFORE CALLING THIS FUNC, YOU SHOULD HAVE LOCKED pmlmepriv->lock
++ */
++__inline static void set_fwstate(struct mlme_priv *pmlmepriv, sint state)
++{
++	pmlmepriv->fw_state |= state;
++}
++
++__inline static void _clr_fwstate_(struct mlme_priv *pmlmepriv, sint state)
++{
++	pmlmepriv->fw_state &= ~state;
++}
++
++/*
++ * No Limit on the calling context,
++ * therefore set it to be the critical section...
++ */
++__inline static void clr_fwstate(struct mlme_priv *pmlmepriv, sint state)
++{
++	_irqL irqL;
++
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++	if (check_fwstate(pmlmepriv, state) == _TRUE)
++		pmlmepriv->fw_state ^= state;
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++}
++
++__inline static void clr_fwstate_ex(struct mlme_priv *pmlmepriv, sint state)
++{
++	_irqL irqL;
++
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++	_clr_fwstate_(pmlmepriv, state);
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++}
++
++__inline static void up_scanned_network(struct mlme_priv *pmlmepriv)
++{
++	_irqL irqL;
++
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++	pmlmepriv->num_of_scanned++;
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++}
++
++#ifdef CONFIG_CONCURRENT_MODE
++sint rtw_buddy_adapter_up(_adapter *padapter);
++sint check_buddy_fwstate(_adapter *padapter, sint state);
++#endif //CONFIG_CONCURRENT_MODE
++
++__inline static void down_scanned_network(struct mlme_priv *pmlmepriv)
++{
++	_irqL irqL;
++
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++	pmlmepriv->num_of_scanned--;
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++}
++
++__inline static void set_scanned_network_val(struct mlme_priv *pmlmepriv, sint val)
++{
++	_irqL irqL;
++
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++	pmlmepriv->num_of_scanned = val;
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++}
++
++extern u16 rtw_get_capability(WLAN_BSSID_EX *bss);
++extern void rtw_update_scanned_network(_adapter *adapter, WLAN_BSSID_EX *target);
++extern void rtw_disconnect_hdl_under_linked(_adapter* adapter, struct sta_info *psta, u8 free_assoc);
++extern void rtw_generate_random_ibss(u8 *pibss);
++extern struct wlan_network* rtw_find_network(_queue *scanned_queue, u8 *addr);
++extern struct wlan_network* rtw_get_oldest_wlan_network(_queue *scanned_queue);
++
++extern void rtw_free_assoc_resources(_adapter* adapter, int lock_scanned_queue);
++extern void rtw_indicate_disconnect(_adapter* adapter);
++extern void rtw_indicate_connect(_adapter* adapter);
++void rtw_indicate_scan_done( _adapter *padapter, bool aborted);
++void rtw_scan_abort(_adapter *adapter);
++
++extern int rtw_restruct_sec_ie(_adapter *adapter,u8 *in_ie,u8 *out_ie,uint in_len);
++extern int rtw_restruct_wmm_ie(_adapter *adapter, u8 *in_ie, u8 *out_ie, uint in_len, uint initial_out_len);
++extern void rtw_init_registrypriv_dev_network(_adapter *adapter);
++
++extern void rtw_update_registrypriv_dev_network(_adapter *adapter);
++
++extern void rtw_get_encrypt_decrypt_from_registrypriv(_adapter *adapter);
++
++extern void _rtw_join_timeout_handler(_adapter *adapter);
++extern void rtw_scan_timeout_handler(_adapter *adapter);
++
++extern void rtw_dynamic_check_timer_handlder(_adapter *adapter);
++#ifdef CONFIG_SET_SCAN_DENY_TIMER
++bool rtw_is_scan_deny(_adapter *adapter);
++void rtw_clear_scan_deny(_adapter *adapter);
++void rtw_set_scan_deny_timer_hdl(_adapter *adapter);
++void rtw_set_scan_deny(_adapter *adapter, u32 ms);
++#else
++#define rtw_is_scan_deny(adapter) _FALSE
++#define rtw_clear_scan_deny(adapter) do {} while (0)
++#define rtw_set_scan_deny_timer_hdl(adapter) do {} while (0)
++#define rtw_set_scan_deny(adapter, ms) do {} while (0)
++#endif
++
++
++extern int _rtw_init_mlme_priv(_adapter *padapter);
++
++void rtw_free_mlme_priv_ie_data(struct mlme_priv *pmlmepriv);
++
++extern void _rtw_free_mlme_priv(struct mlme_priv *pmlmepriv);
++
++extern int _rtw_enqueue_network(_queue *queue, struct wlan_network *pnetwork);
++
++extern struct wlan_network* _rtw_dequeue_network(_queue *queue);
++
++extern struct wlan_network* _rtw_alloc_network(struct mlme_priv *pmlmepriv);
++
++
++extern void _rtw_free_network(struct mlme_priv *pmlmepriv, struct wlan_network *pnetwork, u8 isfreeall);
++extern void _rtw_free_network_nolock(struct mlme_priv *pmlmepriv, struct wlan_network *pnetwork);
++
++
++extern struct wlan_network* _rtw_find_network(_queue *scanned_queue, u8 *addr);
++
++extern void _rtw_free_network_queue(_adapter* padapter, u8 isfreeall);
++
++extern sint rtw_if_up(_adapter *padapter);
++
++
++u8 *rtw_get_capability_from_ie(u8 *ie);
++u8 *rtw_get_timestampe_from_ie(u8 *ie);
++u8 *rtw_get_beacon_interval_from_ie(u8 *ie);
++
++
++void rtw_joinbss_reset(_adapter *padapter);
++
++#ifdef CONFIG_80211N_HT
++unsigned int rtw_restructure_ht_ie(_adapter *padapter, u8 *in_ie, u8 *out_ie, uint in_len, uint *pout_len, u8 channel);
++void rtw_update_ht_cap(_adapter *padapter, u8 *pie, uint ie_len, u8 channel);
++void rtw_issue_addbareq_cmd(_adapter *padapter, struct xmit_frame *pxmitframe);
++#endif
++
++int rtw_is_same_ibss(_adapter *adapter, struct wlan_network *pnetwork);
++int is_same_network(WLAN_BSSID_EX *src, WLAN_BSSID_EX *dst);
++
++#ifdef CONFIG_LAYER2_ROAMING
++void _rtw_roaming(_adapter *adapter, struct wlan_network *tgt_network);
++void rtw_roaming(_adapter *adapter, struct wlan_network *tgt_network);
++void rtw_set_roaming(_adapter *adapter, u8 to_roaming);
++u8 rtw_to_roaming(_adapter *adapter);
++#else
++#define _rtw_roaming(adapter, tgt_network) do {} while(0)
++#define rtw_roaming(adapter, tgt_network) do {} while(0)
++#define rtw_set_roaming(adapter, to_roaming) do {} while(0)
++#define rtw_to_roaming(adapter) 0
++#endif
++
++
++#ifdef CONFIG_INTEL_PROXIM
++void rtw_proxim_enable(_adapter *padapter);
++void rtw_proxim_disable(_adapter *padapter);
++void rtw_proxim_send_packet(_adapter *padapter,u8 *pbuf,u16 len,u8 hw_rate);
++#endif //CONFIG_INTEL_PROXIM
++#endif //__RTL871X_MLME_H_
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_mp.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_mp.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_mp.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_mp.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,712 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef _RTW_MP_H_
++#define _RTW_MP_H_
++
++#ifndef PLATFORM_WINDOWS
++//	00 - Success
++//	11 - Error
++#define STATUS_SUCCESS				(0x00000000L)
++#define STATUS_PENDING				(0x00000103L)
++
++#define STATUS_UNSUCCESSFUL			(0xC0000001L)
++#define STATUS_INSUFFICIENT_RESOURCES		(0xC000009AL)
++#define STATUS_NOT_SUPPORTED			(0xC00000BBL)
++
++#define NDIS_STATUS_SUCCESS			((NDIS_STATUS)STATUS_SUCCESS)
++#define NDIS_STATUS_PENDING			((NDIS_STATUS)STATUS_PENDING)
++#define NDIS_STATUS_NOT_RECOGNIZED		((NDIS_STATUS)0x00010001L)
++#define NDIS_STATUS_NOT_COPIED			((NDIS_STATUS)0x00010002L)
++#define NDIS_STATUS_NOT_ACCEPTED		((NDIS_STATUS)0x00010003L)
++#define NDIS_STATUS_CALL_ACTIVE			((NDIS_STATUS)0x00010007L)
++
++#define NDIS_STATUS_FAILURE			((NDIS_STATUS)STATUS_UNSUCCESSFUL)
++#define NDIS_STATUS_RESOURCES			((NDIS_STATUS)STATUS_INSUFFICIENT_RESOURCES)
++#define NDIS_STATUS_CLOSING			((NDIS_STATUS)0xC0010002L)
++#define NDIS_STATUS_BAD_VERSION			((NDIS_STATUS)0xC0010004L)
++#define NDIS_STATUS_BAD_CHARACTERISTICS		((NDIS_STATUS)0xC0010005L)
++#define NDIS_STATUS_ADAPTER_NOT_FOUND		((NDIS_STATUS)0xC0010006L)
++#define NDIS_STATUS_OPEN_FAILED			((NDIS_STATUS)0xC0010007L)
++#define NDIS_STATUS_DEVICE_FAILED		((NDIS_STATUS)0xC0010008L)
++#define NDIS_STATUS_MULTICAST_FULL		((NDIS_STATUS)0xC0010009L)
++#define NDIS_STATUS_MULTICAST_EXISTS		((NDIS_STATUS)0xC001000AL)
++#define NDIS_STATUS_MULTICAST_NOT_FOUND		((NDIS_STATUS)0xC001000BL)
++#define NDIS_STATUS_REQUEST_ABORTED		((NDIS_STATUS)0xC001000CL)
++#define NDIS_STATUS_RESET_IN_PROGRESS		((NDIS_STATUS)0xC001000DL)
++#define NDIS_STATUS_CLOSING_INDICATING		((NDIS_STATUS)0xC001000EL)
++#define NDIS_STATUS_NOT_SUPPORTED		((NDIS_STATUS)STATUS_NOT_SUPPORTED)
++#define NDIS_STATUS_INVALID_PACKET		((NDIS_STATUS)0xC001000FL)
++#define NDIS_STATUS_OPEN_LIST_FULL		((NDIS_STATUS)0xC0010010L)
++#define NDIS_STATUS_ADAPTER_NOT_READY		((NDIS_STATUS)0xC0010011L)
++#define NDIS_STATUS_ADAPTER_NOT_OPEN		((NDIS_STATUS)0xC0010012L)
++#define NDIS_STATUS_NOT_INDICATING		((NDIS_STATUS)0xC0010013L)
++#define NDIS_STATUS_INVALID_LENGTH		((NDIS_STATUS)0xC0010014L)
++#define NDIS_STATUS_INVALID_DATA		((NDIS_STATUS)0xC0010015L)
++#define NDIS_STATUS_BUFFER_TOO_SHORT		((NDIS_STATUS)0xC0010016L)
++#define NDIS_STATUS_INVALID_OID			((NDIS_STATUS)0xC0010017L)
++#define NDIS_STATUS_ADAPTER_REMOVED		((NDIS_STATUS)0xC0010018L)
++#define NDIS_STATUS_UNSUPPORTED_MEDIA		((NDIS_STATUS)0xC0010019L)
++#define NDIS_STATUS_GROUP_ADDRESS_IN_USE	((NDIS_STATUS)0xC001001AL)
++#define NDIS_STATUS_FILE_NOT_FOUND		((NDIS_STATUS)0xC001001BL)
++#define NDIS_STATUS_ERROR_READING_FILE		((NDIS_STATUS)0xC001001CL)
++#define NDIS_STATUS_ALREADY_MAPPED		((NDIS_STATUS)0xC001001DL)
++#define NDIS_STATUS_RESOURCE_CONFLICT		((NDIS_STATUS)0xC001001EL)
++#define NDIS_STATUS_NO_CABLE			((NDIS_STATUS)0xC001001FL)
++
++#define NDIS_STATUS_INVALID_SAP			((NDIS_STATUS)0xC0010020L)
++#define NDIS_STATUS_SAP_IN_USE			((NDIS_STATUS)0xC0010021L)
++#define NDIS_STATUS_INVALID_ADDRESS		((NDIS_STATUS)0xC0010022L)
++#define NDIS_STATUS_VC_NOT_ACTIVATED		((NDIS_STATUS)0xC0010023L)
++#define NDIS_STATUS_DEST_OUT_OF_ORDER		((NDIS_STATUS)0xC0010024L)  // cause 27
++#define NDIS_STATUS_VC_NOT_AVAILABLE		((NDIS_STATUS)0xC0010025L)  // cause 35,45
++#define NDIS_STATUS_CELLRATE_NOT_AVAILABLE	((NDIS_STATUS)0xC0010026L)  // cause 37
++#define NDIS_STATUS_INCOMPATABLE_QOS		((NDIS_STATUS)0xC0010027L)  // cause 49
++#define NDIS_STATUS_AAL_PARAMS_UNSUPPORTED	((NDIS_STATUS)0xC0010028L)  // cause 93
++#define NDIS_STATUS_NO_ROUTE_TO_DESTINATION	((NDIS_STATUS)0xC0010029L)  // cause 3
++#endif /* #ifndef PLATFORM_WINDOWS */
++
++#if 0
++#define MPT_NOOP			0
++#define MPT_READ_MAC_1BYTE		1
++#define MPT_READ_MAC_2BYTE		2
++#define MPT_READ_MAC_4BYTE		3
++#define MPT_WRITE_MAC_1BYTE		4
++#define MPT_WRITE_MAC_2BYTE		5
++#define MPT_WRITE_MAC_4BYTE		6
++#define MPT_READ_BB_CCK			7
++#define MPT_WRITE_BB_CCK		8
++#define MPT_READ_BB_OFDM		9
++#define MPT_WRITE_BB_OFDM		10
++#define MPT_READ_RF			11
++#define MPT_WRITE_RF			12
++#define MPT_READ_EEPROM_1BYTE		13
++#define MPT_WRITE_EEPROM_1BYTE		14
++#define MPT_READ_EEPROM_2BYTE		15
++#define MPT_WRITE_EEPROM_2BYTE		16
++#define MPT_SET_CSTHRESHOLD		21
++#define MPT_SET_INITGAIN		22
++#define MPT_SWITCH_BAND			23
++#define MPT_SWITCH_CHANNEL		24
++#define MPT_SET_DATARATE		25
++#define MPT_SWITCH_ANTENNA		26
++#define MPT_SET_TX_POWER		27
++#define MPT_SET_CONT_TX			28
++#define MPT_SET_SINGLE_CARRIER		29
++#define MPT_SET_CARRIER_SUPPRESSION	30
++#define MPT_GET_RATE_TABLE		31
++#define MPT_READ_TSSI			32
++#define MPT_GET_THERMAL_METER		33
++#endif
++
++#define MAX_MP_XMITBUF_SZ 	2048
++#define NR_MP_XMITFRAME		8
++
++struct mp_xmit_frame
++{
++	_list	list;
++
++	struct pkt_attrib attrib;
++
++	_pkt *pkt;
++
++	int frame_tag;
++
++	_adapter *padapter;
++
++#ifdef CONFIG_USB_HCI
++
++	//insert urb, irp, and irpcnt info below...
++	//max frag_cnt = 8
++
++	u8 *mem_addr;
++	u32 sz[8];
++
++#if defined(PLATFORM_OS_XP) || defined(PLATFORM_LINUX)
++	PURB pxmit_urb[8];
++#endif
++
++#ifdef PLATFORM_OS_XP
++	PIRP pxmit_irp[8];
++#endif
++
++	u8 bpending[8];
++	sint ac_tag[8];
++	sint last[8];
++	uint irpcnt;
++	uint fragcnt;
++#endif /* CONFIG_USB_HCI */
++
++	uint mem[(MAX_MP_XMITBUF_SZ >> 2)];
++};
++
++struct mp_wiparam
++{
++	u32 bcompleted;
++	u32 act_type;
++	u32 io_offset;
++	u32 io_value;
++};
++
++typedef void(*wi_act_func)(void* padapter);
++
++#ifdef PLATFORM_WINDOWS
++struct mp_wi_cntx
++{
++	u8 bmpdrv_unload;
++
++	// Work Item
++	NDIS_WORK_ITEM mp_wi;
++	NDIS_EVENT mp_wi_evt;
++	_lock mp_wi_lock;
++	u8 bmp_wi_progress;
++	wi_act_func curractfunc;
++	// Variable needed in each implementation of CurrActFunc.
++	struct mp_wiparam param;
++};
++#endif
++
++struct mp_tx
++{
++	u8 stop;
++	u32 count, sended;
++	u8 payload;
++	struct pkt_attrib attrib;
++	struct tx_desc desc;
++	u8 *pallocated_buf;
++	u8 *buf;
++	u32 buf_size, write_size;
++	_thread_hdl_  PktTxThread;
++};
++
++//#if (MP_DRIVER == 1)
++#if defined(CONFIG_RTL8192C) || defined(CONFIG_RTL8192D) || defined(CONFIG_RTL8723A) || defined(CONFIG_RTL8188E)
++#ifdef CONFIG_RTL8192C
++#include <Hal8192CPhyCfg.h>
++#endif
++#ifdef CONFIG_RTL8192D
++#include <Hal8192DPhyCfg.h>
++#endif
++#ifdef CONFIG_RTL8723A
++#include <Hal8723APhyCfg.h>
++#endif
++#ifdef CONFIG_RTL8188E
++#include <rtl8188e_hal.h>
++#endif
++#define MP_MAX_LINES		1000
++#define MP_MAX_LINES_BYTES	256
++#define u1Byte u8
++#define s1Byte s8
++#define u4Byte u32
++#define s4Byte s32
++typedef VOID (*MPT_WORK_ITEM_HANDLER)(IN PVOID Adapter);
++typedef struct _MPT_CONTEXT
++{
++	// Indicate if we have started Mass Production Test.
++	BOOLEAN			bMassProdTest;
++
++	// Indicate if the driver is unloading or unloaded.
++	BOOLEAN			bMptDrvUnload;
++
++	/* 8190 PCI does not support NDIS_WORK_ITEM. */
++	// Work Item for Mass Production Test.
++	//NDIS_WORK_ITEM	MptWorkItem;
++//	RT_WORK_ITEM		MptWorkItem;
++	// Event used to sync the case unloading driver and MptWorkItem is still in progress.
++//	NDIS_EVENT		MptWorkItemEvent;
++	// To protect the following variables.
++//	NDIS_SPIN_LOCK		MptWorkItemSpinLock;
++	// Indicate a MptWorkItem is scheduled and not yet finished.
++	BOOLEAN			bMptWorkItemInProgress;
++	// An instance which implements function and context of MptWorkItem.
++	MPT_WORK_ITEM_HANDLER	CurrMptAct;
++
++	// 1=Start, 0=Stop from UI.
++	ULONG			MptTestStart;
++	// _TEST_MODE, defined in MPT_Req2.h
++	ULONG			MptTestItem;
++	// Variable needed in each implementation of CurrMptAct.
++	ULONG			MptActType; 	// Type of action performed in CurrMptAct.
++	// The Offset of IO operation is depend of MptActType.
++	ULONG			MptIoOffset;
++	// The Value of IO operation is depend of MptActType.
++	ULONG			MptIoValue;
++	// The RfPath of IO operation is depend of MptActType.
++	ULONG			MptRfPath;
++
++	WIRELESS_MODE		MptWirelessModeToSw;	// Wireless mode to switch.
++	u8			MptChannelToSw; 	// Channel to switch.
++	u8			MptInitGainToSet; 	// Initial gain to set.
++	//ULONG			bMptAntennaA; 		// TRUE if we want to use antenna A.
++	ULONG			MptBandWidth;		// bandwidth to switch.
++	ULONG			MptRateIndex;		// rate index.
++	// Register value kept for Single Carrier Tx test.
++	u8			btMpCckTxPower;
++	// Register value kept for Single Carrier Tx test.
++	u8			btMpOfdmTxPower;
++	// For MP Tx Power index
++	u8			TxPwrLevel[2];	// rf-A, rf-B
++
++	// Content of RCR Regsiter for Mass Production Test.
++	ULONG			MptRCR;
++	// TRUE if we only receive packets with specific pattern.
++	BOOLEAN			bMptFilterPattern;
++ 	// Rx OK count, statistics used in Mass Production Test.
++ 	ULONG			MptRxOkCnt;
++ 	// Rx CRC32 error count, statistics used in Mass Production Test.
++ 	ULONG			MptRxCrcErrCnt;
++
++	BOOLEAN			bCckContTx;	// TRUE if we are in CCK Continuous Tx test.
++ 	BOOLEAN			bOfdmContTx;	// TRUE if we are in OFDM Continuous Tx test.
++	BOOLEAN			bStartContTx; 	// TRUE if we have start Continuous Tx test.
++	// TRUE if we are in Single Carrier Tx test.
++	BOOLEAN			bSingleCarrier;
++	// TRUE if we are in Carrier Suppression Tx Test.
++	BOOLEAN			bCarrierSuppression;
++	//TRUE if we are in Single Tone Tx test.
++	BOOLEAN			bSingleTone;
++
++	// ACK counter asked by K.Y..
++	BOOLEAN			bMptEnableAckCounter;
++	ULONG			MptAckCounter;
++
++	// SD3 Willis For 8192S to save 1T/2T RF table for ACUT	Only fro ACUT delete later ~~~!
++	//s1Byte		BufOfLines[2][MAX_LINES_HWCONFIG_TXT][MAX_BYTES_LINE_HWCONFIG_TXT];
++	//s1Byte			BufOfLines[2][MP_MAX_LINES][MP_MAX_LINES_BYTES];
++	//s4Byte			RfReadLine[2];
++
++	u8		APK_bound[2];	//for APK	path A/path B
++	BOOLEAN		bMptIndexEven;
++
++	u8		backup0xc50;
++	u8		backup0xc58;
++	u8		backup0xc30;
++}MPT_CONTEXT, *PMPT_CONTEXT;
++#endif
++//#endif
++
++/* E-Fuse */
++#ifdef CONFIG_RTL8192D
++#define EFUSE_MAP_SIZE		255
++#endif
++#ifdef CONFIG_RTL8192C
++#define EFUSE_MAP_SIZE		128
++#endif
++#ifdef CONFIG_RTL8723A
++#define EFUSE_MAP_SIZE		256
++#endif
++#ifdef CONFIG_RTL8188E
++#define EFUSE_MAP_SIZE		256
++#endif
++#define EFUSE_MAX_SIZE		512
++
++/* end of E-Fuse */
++
++//#define RTPRIV_IOCTL_MP 					( SIOCIWFIRSTPRIV + 0x17)
++enum {	  
++	WRITE_REG = 1,
++	READ_REG,
++	WRITE_RF,
++	READ_RF,
++	MP_START,
++	MP_STOP,
++	MP_RATE,
++	MP_CHANNEL,
++	MP_BANDWIDTH,
++	MP_TXPOWER,
++	MP_ANT_TX,
++	MP_ANT_RX,
++	MP_CTX,
++	MP_QUERY,
++	MP_ARX,
++	MP_PSD,
++	MP_PWRTRK,
++	MP_THER,
++	MP_IOCTL,
++	EFUSE_GET,
++	EFUSE_SET,
++	MP_RESET_STATS,
++	MP_DUMP,
++	MP_PHYPARA,
++	MP_NULL,
++};
++
++struct mp_priv
++{
++	_adapter *papdater;
++
++	//Testing Flag
++	u32 mode;//0 for normal type packet, 1 for loopback packet (16bytes TXCMD)
++
++	u32 prev_fw_state;
++
++	//OID cmd handler
++	struct mp_wiparam workparam;
++//	u8 act_in_progress;
++
++	//Tx Section
++	u8 TID;
++	u32 tx_pktcount;
++	struct mp_tx tx;
++
++	//Rx Section
++	u32 rx_pktcount;
++	u32 rx_crcerrpktcount;
++	u32 rx_pktloss;
++
++	struct recv_stat rxstat;
++
++	//RF/BB relative
++	u8 channel;
++	u8 bandwidth;
++	u8 prime_channel_offset;
++	u8 txpoweridx;
++	u8 txpoweridx_b;
++	u8 rateidx;
++	u32 preamble;
++//	u8 modem;
++	u32 CrystalCap;
++//	u32 curr_crystalcap;
++
++	u16 antenna_tx;
++	u16 antenna_rx;
++//	u8 curr_rfpath;
++
++	u8 check_mp_pkt;
++
++//	uint ForcedDataRate;
++
++	struct wlan_network mp_network;
++	NDIS_802_11_MAC_ADDRESS network_macaddr;
++
++#ifdef PLATFORM_WINDOWS
++	u32 rx_testcnt;
++	u32 rx_testcnt1;
++	u32 rx_testcnt2;
++	u32 tx_testcnt;
++	u32 tx_testcnt1;
++
++	struct mp_wi_cntx wi_cntx;
++
++	u8 h2c_result;
++	u8 h2c_seqnum;
++	u16 h2c_cmdcode;
++	u8 h2c_resp_parambuf[512];
++	_lock h2c_lock;
++	_lock wkitm_lock;
++	u32 h2c_cmdcnt;
++	NDIS_EVENT h2c_cmd_evt;
++	NDIS_EVENT c2h_set;
++	NDIS_EVENT h2c_clr;
++	NDIS_EVENT cpwm_int;
++
++	NDIS_EVENT scsir_full_evt;
++	NDIS_EVENT scsiw_empty_evt;
++#endif
++
++	u8 *pallocated_mp_xmitframe_buf;
++	u8 *pmp_xmtframe_buf;
++	_queue free_mp_xmitqueue;
++	u32 free_mp_xmitframe_cnt;
++
++	MPT_CONTEXT MptCtx;
++};
++
++typedef struct _IOCMD_STRUCT_ {
++	u8	cmdclass;
++	u16	value;
++	u8	index;
++}IOCMD_STRUCT;
++
++struct rf_reg_param {
++	u32 path;
++	u32 offset;
++	u32 value;
++};
++
++struct bb_reg_param {
++	u32 offset;
++	u32 value;
++};
++//=======================================================================
++
++#define LOWER 	_TRUE
++#define RAISE	_FALSE
++
++/* Hardware Registers */
++#if 0
++#if 0
++#define IOCMD_CTRL_REG			0x102502C0
++#define IOCMD_DATA_REG			0x102502C4
++#else
++#define IOCMD_CTRL_REG			0x10250370
++#define IOCMD_DATA_REG			0x10250374
++#endif
++
++#define IOCMD_GET_THERMAL_METER		0xFD000028
++
++#define IOCMD_CLASS_BB_RF		0xF0
++#define IOCMD_BB_READ_IDX		0x00
++#define IOCMD_BB_WRITE_IDX		0x01
++#define IOCMD_RF_READ_IDX		0x02
++#define IOCMD_RF_WRIT_IDX		0x03
++#endif
++#define BB_REG_BASE_ADDR		0x800
++
++/* MP variables */
++#if 0
++#define _2MAC_MODE_	0
++#define _LOOPBOOK_MODE_	1
++#endif
++typedef enum _MP_MODE_ {
++	MP_OFF,
++	MP_ON,
++	MP_ERR,
++	MP_CONTINUOUS_TX,
++	MP_SINGLE_CARRIER_TX,
++	MP_CARRIER_SUPPRISSION_TX,
++	MP_SINGLE_TONE_TX,
++	MP_PACKET_TX,
++	MP_PACKET_RX
++} MP_MODE;
++
++#ifdef CONFIG_RTL8192C
++#define RF_PATH_A 	RF_PATH_A
++#define RF_PATH_B 	RF_PATH_B
++#define RF_PATH_C 	RF_PATH_C
++#define RF_PATH_D 	RF_PATH_D
++
++#define MAX_RF_PATH_NUMS	RF_PATH_MAX
++#else
++#define RF_PATH_A 	0
++#define RF_PATH_B 	1
++#define RF_PATH_C 	2
++#define RF_PATH_D 	3
++
++#define MAX_RF_PATH_NUMS	2
++#endif
++
++extern u8 mpdatarate[NumRates];
++
++/* MP set force data rate base on the definition. */
++typedef enum _MPT_RATE_INDEX
++{
++	/* CCK rate. */
++	MPT_RATE_1M,	/* 0 */
++	MPT_RATE_2M,
++	MPT_RATE_55M,
++	MPT_RATE_11M,	/* 3 */
++
++	/* OFDM rate. */
++	MPT_RATE_6M,	/* 4 */
++	MPT_RATE_9M,
++	MPT_RATE_12M,
++	MPT_RATE_18M,
++	MPT_RATE_24M,
++	MPT_RATE_36M,
++	MPT_RATE_48M,
++	MPT_RATE_54M,	/* 11 */
++
++	/* HT rate. */
++	MPT_RATE_MCS0,	/* 12 */
++	MPT_RATE_MCS1,
++	MPT_RATE_MCS2,
++	MPT_RATE_MCS3,
++	MPT_RATE_MCS4,
++	MPT_RATE_MCS5,
++	MPT_RATE_MCS6,
++	MPT_RATE_MCS7,	/* 19 */
++	MPT_RATE_MCS8,
++	MPT_RATE_MCS9,
++	MPT_RATE_MCS10,
++	MPT_RATE_MCS11,
++	MPT_RATE_MCS12,
++	MPT_RATE_MCS13,
++	MPT_RATE_MCS14,
++	MPT_RATE_MCS15,	/* 27 */
++	MPT_RATE_LAST
++}MPT_RATE_E, *PMPT_RATE_E;
++
++#if 0
++// Represent Channel Width in HT Capabilities
++typedef enum _HT_CHANNEL_WIDTH {
++	HT_CHANNEL_WIDTH_20 = 0,
++	HT_CHANNEL_WIDTH_40 = 1,
++}HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH;
++#endif
++
++#define MAX_TX_PWR_INDEX_N_MODE 64	// 0x3F
++
++typedef enum _POWER_MODE_ {
++	POWER_LOW = 0,
++	POWER_NORMAL
++}POWER_MODE;
++
++
++#define RX_PKT_BROADCAST	1
++#define RX_PKT_DEST_ADDR	2
++#define RX_PKT_PHY_MATCH	3
++
++#if 0
++#define RPTMaxCount 0x000FFFFF;
++
++// parameter 1 : BitMask
++// 	bit 0  : OFDM PPDU
++//	bit 1  : OFDM False Alarm
++//	bit 2  : OFDM MPDU OK
++//	bit 3  : OFDM MPDU Fail
++//	bit 4  : CCK PPDU
++//	bit 5  : CCK False Alarm
++//	bit 6  : CCK MPDU ok
++//	bit 7  : CCK MPDU fail
++//	bit 8  : HT PPDU counter
++//	bit 9  : HT false alarm
++//	bit 10 : HT MPDU total
++//	bit 11 : HT MPDU OK
++//	bit 12 : HT MPDU fail
++//	bit 15 : RX full drop
++typedef enum _RXPHY_BITMASK_
++{
++	OFDM_PPDU_BIT = 0,
++	OFDM_FALSE_BIT,
++	OFDM_MPDU_OK_BIT,
++	OFDM_MPDU_FAIL_BIT,
++	CCK_PPDU_BIT,
++	CCK_FALSE_BIT,
++	CCK_MPDU_OK_BIT,
++	CCK_MPDU_FAIL_BIT,
++	HT_PPDU_BIT,
++	HT_FALSE_BIT,
++	HT_MPDU_BIT,
++	HT_MPDU_OK_BIT,
++	HT_MPDU_FAIL_BIT,
++} RXPHY_BITMASK;
++#endif
++
++typedef enum _ENCRY_CTRL_STATE_ {
++	HW_CONTROL,		//hw encryption& decryption
++	SW_CONTROL,		//sw encryption& decryption
++	HW_ENCRY_SW_DECRY,	//hw encryption & sw decryption
++	SW_ENCRY_HW_DECRY	//sw encryption & hw decryption
++}ENCRY_CTRL_STATE;
++
++typedef enum _OFDM_TX_MODE {
++	OFDM_ALL_OFF		= 0,	
++	OFDM_ContinuousTx	= 1,
++	OFDM_SingleCarrier	= 2,
++	OFDM_SingleTone 	= 4,
++} OFDM_TX_MODE;
++
++//=======================================================================
++//extern struct mp_xmit_frame *alloc_mp_xmitframe(struct mp_priv *pmp_priv);
++//extern int free_mp_xmitframe(struct xmit_priv *pxmitpriv, struct mp_xmit_frame *pmp_xmitframe);
++
++extern s32 init_mp_priv(PADAPTER padapter);
++extern void free_mp_priv(struct mp_priv *pmp_priv);
++extern s32 MPT_InitializeAdapter(PADAPTER padapter, u8 Channel);
++extern void MPT_DeInitAdapter(PADAPTER padapter);
++extern s32 mp_start_test(PADAPTER padapter);
++extern void mp_stop_test(PADAPTER padapter);
++
++//=======================================================================
++//extern void	IQCalibrateBcut(PADAPTER pAdapter);
++
++//extern u32	bb_reg_read(PADAPTER Adapter, u16 offset);
++//extern u8	bb_reg_write(PADAPTER Adapter, u16 offset, u32 value);
++//extern u32	rf_reg_read(PADAPTER Adapter, u8 path, u8 offset);
++//extern u8	rf_reg_write(PADAPTER Adapter, u8 path, u8 offset, u32 value);
++
++//extern u32	get_bb_reg(PADAPTER Adapter, u16 offset, u32 bitmask);
++//extern u8	set_bb_reg(PADAPTER Adapter, u16 offset, u32 bitmask, u32 value);
++//extern u32	get_rf_reg(PADAPTER Adapter, u8 path, u8 offset, u32 bitmask);
++//extern u8	set_rf_reg(PADAPTER Adapter, u8 path, u8 offset, u32 bitmask, u32 value);
++
++extern u32 _read_rfreg(PADAPTER padapter, u8 rfpath, u32 addr, u32 bitmask);
++extern void _write_rfreg(PADAPTER padapter, u8 rfpath, u32 addr, u32 bitmask, u32 val);
++
++extern u32 read_macreg(_adapter *padapter, u32 addr, u32 sz);
++extern void write_macreg(_adapter *padapter, u32 addr, u32 val, u32 sz);
++extern u32 read_bbreg(_adapter *padapter, u32 addr, u32 bitmask);
++extern void write_bbreg(_adapter *padapter, u32 addr, u32 bitmask, u32 val);
++extern u32 read_rfreg(PADAPTER padapter, u8 rfpath, u32 addr);
++extern void write_rfreg(PADAPTER padapter, u8 rfpath, u32 addr, u32 val);
++
++extern void	SetChannel(PADAPTER pAdapter);
++extern void	SetBandwidth(PADAPTER pAdapter);
++extern void	SetTxPower(PADAPTER pAdapter);
++extern void	SetAntennaPathPower(PADAPTER pAdapter);
++//extern void	SetTxAGCOffset(PADAPTER pAdapter, u32 ulTxAGCOffset);
++extern void	SetDataRate(PADAPTER pAdapter);
++
++extern void	SetAntenna(PADAPTER pAdapter);
++
++//extern void	SetCrystalCap(PADAPTER pAdapter);
++
++extern s32	SetThermalMeter(PADAPTER pAdapter, u8 target_ther);
++extern void	GetThermalMeter(PADAPTER pAdapter, u8 *value);
++
++extern void	SetContinuousTx(PADAPTER pAdapter, u8 bStart);
++extern void	SetSingleCarrierTx(PADAPTER pAdapter, u8 bStart);
++extern void	SetSingleToneTx(PADAPTER pAdapter, u8 bStart);
++extern void	SetCarrierSuppressionTx(PADAPTER pAdapter, u8 bStart);
++
++extern void	fill_txdesc_for_mp(PADAPTER padapter, struct tx_desc *ptxdesc);
++extern void	SetPacketTx(PADAPTER padapter);
++extern void	SetPacketRx(PADAPTER pAdapter, u8 bStartRx);
++
++extern void	ResetPhyRxPktCount(PADAPTER pAdapter);
++extern u32	GetPhyRxPktReceived(PADAPTER pAdapter);
++extern u32	GetPhyRxPktCRC32Error(PADAPTER pAdapter);
++
++extern s32	SetPowerTracking(PADAPTER padapter, u8 enable);
++extern void	GetPowerTracking(PADAPTER padapter, u8 *enable);
++
++extern u32	mp_query_psd(PADAPTER pAdapter, u8 *data);
++
++
++extern void Hal_SetAntenna(PADAPTER pAdapter);
++extern void Hal_SetBandwidth(PADAPTER pAdapter);
++
++extern void Hal_SetTxPower(PADAPTER pAdapter);
++extern void Hal_SetCarrierSuppressionTx(PADAPTER pAdapter, u8 bStart);
++extern void Hal_SetSingleToneTx ( PADAPTER pAdapter , u8 bStart );
++extern void Hal_SetSingleCarrierTx (PADAPTER pAdapter, u8 bStart);
++extern void Hal_SetContinuousTx (PADAPTER pAdapter, u8 bStart);
++extern void Hal_SetBandwidth(PADAPTER pAdapter);
++
++extern void Hal_SetDataRate(PADAPTER pAdapter);
++extern void Hal_SetChannel(PADAPTER pAdapter);
++extern void Hal_SetAntennaPathPower(PADAPTER pAdapter);
++extern s32 Hal_SetThermalMeter(PADAPTER pAdapter, u8 target_ther);
++extern s32 Hal_SetPowerTracking(PADAPTER padapter, u8 enable);
++extern void Hal_GetPowerTracking(PADAPTER padapter, u8 * enable);
++extern void Hal_GetThermalMeter(PADAPTER pAdapter, u8 *value);
++extern void Hal_mpt_SwitchRfSetting(PADAPTER pAdapter);
++extern void Hal_MPT_CCKTxPowerAdjust(PADAPTER Adapter, BOOLEAN bInCH14);
++extern void Hal_MPT_CCKTxPowerAdjustbyIndex(PADAPTER pAdapter, BOOLEAN beven);
++extern void Hal_SetCCKTxPower(PADAPTER pAdapter, u8 * TxPower);
++extern void Hal_SetOFDMTxPower(PADAPTER pAdapter, u8 * TxPower);
++extern void Hal_TriggerRFThermalMeter(PADAPTER pAdapter);
++extern u8 Hal_ReadRFThermalMeter(PADAPTER pAdapter);
++extern void Hal_SetCCKContinuousTx(PADAPTER pAdapter, u8 bStart);
++extern void Hal_SetOFDMContinuousTx(PADAPTER pAdapter, u8 bStart);
++extern void Hal_ProSetCrystalCap (PADAPTER pAdapter , u32 CrystalCapVal);
++
++#endif //_RTW_MP_H_
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_mp_ioctl.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_mp_ioctl.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_mp_ioctl.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_mp_ioctl.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,596 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef _RTW_MP_IOCTL_H_
++#define _RTW_MP_IOCTL_H_
++
++//#include <drv_conf.h>
++//#include <osdep_service.h>
++#include <drv_types.h>
++#include <mp_custom_oid.h>
++#include <rtw_ioctl.h>
++#include <rtw_ioctl_rtl.h>
++#include <rtw_efuse.h>
++#include <rtw_mp.h>
++
++#if 0
++#define TESTFWCMDNUMBER			1000000
++#define TEST_H2CINT_WAIT_TIME		500
++#define TEST_C2HINT_WAIT_TIME		500
++#define HCI_TEST_SYSCFG_HWMASK		1
++#define _BUSCLK_40M			(4 << 2)
++#endif
++//------------------------------------------------------------------------------
++typedef struct CFG_DBG_MSG_STRUCT {
++	u32 DebugLevel;
++	u32 DebugComponent_H32;
++	u32 DebugComponent_L32;
++}CFG_DBG_MSG_STRUCT,*PCFG_DBG_MSG_STRUCT;
++
++typedef struct _RW_REG {
++	u32 offset;
++	u32 width;
++	u32 value;
++}mp_rw_reg,RW_Reg, *pRW_Reg;
++
++//for OID_RT_PRO_READ16_EEPROM & OID_RT_PRO_WRITE16_EEPROM
++typedef struct _EEPROM_RW_PARAM {
++	u32 offset;
++	u16 value;
++}eeprom_rw_param,EEPROM_RWParam, *pEEPROM_RWParam;
++
++typedef struct _EFUSE_ACCESS_STRUCT_ {
++	u16	start_addr;
++	u16	cnts;
++	u8	data[0];
++}EFUSE_ACCESS_STRUCT, *PEFUSE_ACCESS_STRUCT;
++
++typedef struct _BURST_RW_REG {
++	u32 offset;
++	u32 len;
++	u8 Data[256];
++}burst_rw_reg,Burst_RW_Reg, *pBurst_RW_Reg;
++
++typedef struct _USB_VendorReq{
++	u8	bRequest;
++	u16	wValue;
++	u16	wIndex;
++	u16	wLength;
++	u8	u8Dir;//0:OUT, 1:IN
++	u8	u8InData;
++}usb_vendor_req, USB_VendorReq, *pUSB_VendorReq;
++
++typedef struct _DR_VARIABLE_STRUCT_ {
++	u8 offset;
++	u32 variable;
++}DR_VARIABLE_STRUCT;
++
++//int mp_start_joinbss(_adapter *padapter, NDIS_802_11_SSID *pssid);
++
++//void _irqlevel_changed_(_irqL *irqlevel, /*BOOLEAN*/unsigned char bLower);
++#ifdef PLATFORM_OS_XP
++static void _irqlevel_changed_(_irqL *irqlevel, u8 bLower)
++{
++
++	if (bLower == LOWER) {
++		*irqlevel = KeGetCurrentIrql();
++
++		if (*irqlevel > PASSIVE_LEVEL) {
++			KeLowerIrql(PASSIVE_LEVEL);
++		}
++	} else {
++		if (KeGetCurrentIrql() == PASSIVE_LEVEL) {
++			KeRaiseIrql(DISPATCH_LEVEL, irqlevel);
++		}
++	}
++
++}
++#else
++#define _irqlevel_changed_(a,b)
++#endif
++
++//oid_rtl_seg_81_80_00
++NDIS_STATUS oid_rt_pro_set_data_rate_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_start_test_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_stop_test_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_set_channel_direct_call_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_set_antenna_bb_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_set_tx_power_control_hdl(struct oid_par_priv* poid_par_priv);
++//oid_rtl_seg_81_80_20
++NDIS_STATUS oid_rt_pro_query_tx_packet_sent_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_query_rx_packet_received_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_query_rx_packet_crc32_error_hdl(struct oid_par_priv* poid_par_priv);
++
++NDIS_STATUS oid_rt_pro_reset_tx_packet_sent_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_reset_rx_packet_received_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_set_modulation_hdl(struct oid_par_priv* poid_par_priv);
++
++NDIS_STATUS oid_rt_pro_set_continuous_tx_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_set_single_carrier_tx_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_set_carrier_suppression_tx_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_set_single_tone_tx_hdl(struct oid_par_priv* poid_par_priv);
++
++
++//oid_rtl_seg_81_87
++NDIS_STATUS oid_rt_pro_write_bb_reg_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_read_bb_reg_hdl(struct oid_par_priv* poid_par_priv);
++
++NDIS_STATUS oid_rt_pro_write_rf_reg_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_read_rf_reg_hdl(struct oid_par_priv* poid_par_priv);
++
++
++//oid_rtl_seg_81_85
++NDIS_STATUS oid_rt_wireless_mode_hdl(struct oid_par_priv* poid_par_priv);
++
++
++// oid_rtl_seg_87_11_00
++NDIS_STATUS oid_rt_pro8711_join_bss_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_read_register_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_write_register_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_burst_read_register_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_burst_write_register_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_write_txcmd_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_read16_eeprom_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_write16_eeprom_hdl (struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro8711_wi_poll_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro8711_pkt_loss_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_rd_attrib_mem_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_wr_attrib_mem_hdl (struct oid_par_priv* poid_par_priv);
++NDIS_STATUS  oid_rt_pro_set_rf_intfs_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_poll_rx_status_hdl(struct oid_par_priv* poid_par_priv);
++// oid_rtl_seg_87_11_20
++NDIS_STATUS oid_rt_pro_cfg_debug_message_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_set_data_rate_ex_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_set_basic_rate_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_read_tssi_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_set_power_tracking_hdl(struct oid_par_priv* poid_par_priv);
++//oid_rtl_seg_87_11_50
++NDIS_STATUS oid_rt_pro_qry_pwrstate_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_set_pwrstate_hdl(struct oid_par_priv* poid_par_priv);
++//oid_rtl_seg_87_11_F0
++NDIS_STATUS oid_rt_pro_h2c_set_rate_table_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_h2c_get_rate_table_hdl(struct oid_par_priv* poid_par_priv);
++
++
++//oid_rtl_seg_87_12_00
++NDIS_STATUS oid_rt_pro_encryption_ctrl_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_add_sta_info_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_dele_sta_info_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_query_dr_variable_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_rx_packet_type_hdl(struct oid_par_priv* poid_par_priv);
++
++NDIS_STATUS oid_rt_pro_read_efuse_hdl(struct oid_par_priv *poid_par_priv);
++NDIS_STATUS oid_rt_pro_write_efuse_hdl(struct oid_par_priv *poid_par_priv);
++NDIS_STATUS oid_rt_pro_rw_efuse_pgpkt_hdl(struct oid_par_priv *poid_par_priv);
++NDIS_STATUS oid_rt_get_efuse_current_size_hdl(struct oid_par_priv *poid_par_priv);
++NDIS_STATUS oid_rt_pro_efuse_hdl(struct oid_par_priv *poid_par_priv);
++NDIS_STATUS oid_rt_pro_efuse_map_hdl(struct oid_par_priv *poid_par_priv);
++
++NDIS_STATUS oid_rt_set_bandwidth_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_set_crystal_cap_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_set_rx_packet_type_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_get_efuse_max_size_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_pro_set_tx_agc_offset_hdl(struct oid_par_priv* poid_par_priv);
++
++NDIS_STATUS oid_rt_pro_set_pkt_test_mode_hdl(struct oid_par_priv* poid_par_priv);
++
++NDIS_STATUS oid_rt_get_thermal_meter_hdl(struct oid_par_priv* poid_par_priv);
++
++NDIS_STATUS oid_rt_reset_phy_rx_packet_count_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_get_phy_rx_packet_received_hdl(struct oid_par_priv* poid_par_priv);
++NDIS_STATUS oid_rt_get_phy_rx_packet_crc32_error_hdl(struct oid_par_priv* poid_par_priv);
++
++NDIS_STATUS oid_rt_set_power_down_hdl(struct oid_par_priv* poid_par_priv);
++
++NDIS_STATUS oid_rt_get_power_mode_hdl(struct oid_par_priv* poid_par_priv);
++
++NDIS_STATUS oid_rt_pro_trigger_gpio_hdl(struct oid_par_priv *poid_par_priv);
++
++#ifdef _RTW_MP_IOCTL_C_
++
++const struct oid_obj_priv oid_rtl_seg_81_80_00[] =
++{
++	{1, &oid_null_function},			//0x00	OID_RT_PRO_RESET_DUT
++	{1, &oid_rt_pro_set_data_rate_hdl},		//0x01
++	{1, &oid_rt_pro_start_test_hdl},		//0x02
++	{1, &oid_rt_pro_stop_test_hdl},			//0x03
++	{1, &oid_null_function},			//0x04	OID_RT_PRO_SET_PREAMBLE
++	{1, &oid_null_function},			//0x05	OID_RT_PRO_SET_SCRAMBLER
++	{1, &oid_null_function},			//0x06	OID_RT_PRO_SET_FILTER_BB
++	{1, &oid_null_function},			//0x07	OID_RT_PRO_SET_MANUAL_DIVERSITY_BB
++	{1, &oid_rt_pro_set_channel_direct_call_hdl},	//0x08
++	{1, &oid_null_function},			//0x09	OID_RT_PRO_SET_SLEEP_MODE_DIRECT_CALL
++	{1, &oid_null_function},			//0x0A	OID_RT_PRO_SET_WAKE_MODE_DIRECT_CALL
++	{1, &oid_rt_pro_set_continuous_tx_hdl},		//0x0B	OID_RT_PRO_SET_TX_CONTINUOUS_DIRECT_CALL
++	{1, &oid_rt_pro_set_single_carrier_tx_hdl},	//0x0C	OID_RT_PRO_SET_SINGLE_CARRIER_TX_CONTINUOUS
++	{1, &oid_null_function},			//0x0D	OID_RT_PRO_SET_TX_ANTENNA_BB
++	{1, &oid_rt_pro_set_antenna_bb_hdl},		//0x0E
++	{1, &oid_null_function},			//0x0F	OID_RT_PRO_SET_CR_SCRAMBLER
++	{1, &oid_null_function},			//0x10	OID_RT_PRO_SET_CR_NEW_FILTER
++	{1, &oid_rt_pro_set_tx_power_control_hdl},	//0x11	OID_RT_PRO_SET_TX_POWER_CONTROL
++	{1, &oid_null_function},			//0x12	OID_RT_PRO_SET_CR_TX_CONFIG
++	{1, &oid_null_function},			//0x13	OID_RT_PRO_GET_TX_POWER_CONTROL
++	{1, &oid_null_function},			//0x14	OID_RT_PRO_GET_CR_SIGNAL_QUALITY
++	{1, &oid_null_function},			//0x15	OID_RT_PRO_SET_CR_SETPOINT
++	{1, &oid_null_function},			//0x16	OID_RT_PRO_SET_INTEGRATOR
++	{1, &oid_null_function},			//0x17	OID_RT_PRO_SET_SIGNAL_QUALITY
++	{1, &oid_null_function},			//0x18	OID_RT_PRO_GET_INTEGRATOR
++	{1, &oid_null_function},			//0x19	OID_RT_PRO_GET_SIGNAL_QUALITY
++	{1, &oid_null_function},			//0x1A	OID_RT_PRO_QUERY_EEPROM_TYPE
++	{1, &oid_null_function},			//0x1B	OID_RT_PRO_WRITE_MAC_ADDRESS
++	{1, &oid_null_function},			//0x1C	OID_RT_PRO_READ_MAC_ADDRESS
++	{1, &oid_null_function},			//0x1D	OID_RT_PRO_WRITE_CIS_DATA
++	{1, &oid_null_function},			//0x1E	OID_RT_PRO_READ_CIS_DATA
++	{1, &oid_null_function}				//0x1F	OID_RT_PRO_WRITE_POWER_CONTROL
++
++};
++
++const struct oid_obj_priv oid_rtl_seg_81_80_20[] =
++{
++	{1, &oid_null_function},			//0x20	OID_RT_PRO_READ_POWER_CONTROL
++	{1, &oid_null_function},			//0x21	OID_RT_PRO_WRITE_EEPROM
++	{1, &oid_null_function},			//0x22	OID_RT_PRO_READ_EEPROM
++	{1, &oid_rt_pro_reset_tx_packet_sent_hdl},	//0x23
++	{1, &oid_rt_pro_query_tx_packet_sent_hdl},	//0x24
++	{1, &oid_rt_pro_reset_rx_packet_received_hdl},	//0x25
++	{1, &oid_rt_pro_query_rx_packet_received_hdl},	//0x26
++	{1, &oid_rt_pro_query_rx_packet_crc32_error_hdl},	//0x27
++	{1, &oid_null_function},			//0x28	OID_RT_PRO_QUERY_CURRENT_ADDRESS
++	{1, &oid_null_function},			//0x29	OID_RT_PRO_QUERY_PERMANENT_ADDRESS
++	{1, &oid_null_function},			//0x2A	OID_RT_PRO_SET_PHILIPS_RF_PARAMETERS
++	{1, &oid_rt_pro_set_carrier_suppression_tx_hdl},//0x2B	OID_RT_PRO_SET_CARRIER_SUPPRESSION_TX
++	{1, &oid_null_function},			//0x2C	OID_RT_PRO_RECEIVE_PACKET
++	{1, &oid_null_function},			//0x2D	OID_RT_PRO_WRITE_EEPROM_BYTE
++	{1, &oid_null_function},			//0x2E	OID_RT_PRO_READ_EEPROM_BYTE
++	{1, &oid_rt_pro_set_modulation_hdl}		//0x2F
++
++};
++
++const struct oid_obj_priv oid_rtl_seg_81_80_40[] =
++{
++	{1, &oid_null_function},			//0x40
++	{1, &oid_null_function},			//0x41
++	{1, &oid_null_function},			//0x42
++	{1, &oid_rt_pro_set_single_tone_tx_hdl},	//0x43
++	{1, &oid_null_function},			//0x44
++	{1, &oid_null_function}				//0x45
++};
++
++const struct oid_obj_priv oid_rtl_seg_81_80_80[] =
++{
++	{1, &oid_null_function},			//0x80	OID_RT_DRIVER_OPTION
++	{1, &oid_null_function},			//0x81	OID_RT_RF_OFF
++	{1, &oid_null_function}				//0x82	OID_RT_AUTH_STATUS
++
++};
++
++const struct oid_obj_priv oid_rtl_seg_81_85[] =
++{
++	{1, &oid_rt_wireless_mode_hdl}			//0x00	OID_RT_WIRELESS_MODE
++};
++
++struct oid_obj_priv oid_rtl_seg_81_87[] =
++{
++	{1, &oid_null_function},			//0x80	OID_RT_PRO8187_WI_POLL
++	{1, &oid_rt_pro_write_bb_reg_hdl},		//0x81
++	{1, &oid_rt_pro_read_bb_reg_hdl},		//0x82
++	{1, &oid_rt_pro_write_rf_reg_hdl},		//0x82
++	{1, &oid_rt_pro_read_rf_reg_hdl}		//0x83
++};
++
++struct oid_obj_priv oid_rtl_seg_87_11_00[] =
++{
++	{1, &oid_rt_pro8711_join_bss_hdl},		//0x00  //S
++	{1, &oid_rt_pro_read_register_hdl},		//0x01
++	{1, &oid_rt_pro_write_register_hdl},		//0x02
++	{1, &oid_rt_pro_burst_read_register_hdl},	//0x03
++	{1, &oid_rt_pro_burst_write_register_hdl},	//0x04
++	{1, &oid_rt_pro_write_txcmd_hdl},		//0x05
++	{1, &oid_rt_pro_read16_eeprom_hdl},		//0x06
++	{1, &oid_rt_pro_write16_eeprom_hdl},		//0x07
++	{1, &oid_null_function},			//0x08	OID_RT_PRO_H2C_SET_COMMAND
++	{1, &oid_null_function},			//0x09	OID_RT_PRO_H2C_QUERY_RESULT
++	{1, &oid_rt_pro8711_wi_poll_hdl},		//0x0A
++	{1, &oid_rt_pro8711_pkt_loss_hdl},		//0x0B
++	{1, &oid_rt_rd_attrib_mem_hdl},			//0x0C
++	{1, &oid_rt_wr_attrib_mem_hdl},			//0x0D
++	{1, &oid_null_function},			//0x0E
++	{1, &oid_null_function},			//0x0F
++	{1, &oid_null_function},			//0x10	OID_RT_PRO_H2C_CMD_MODE
++	{1, &oid_null_function},			//0x11	OID_RT_PRO_H2C_CMD_RSP_MODE
++	{1, &oid_null_function},			//0X12	OID_RT_PRO_WAIT_C2H_EVENT
++	{1, &oid_null_function},			//0X13	OID_RT_PRO_RW_ACCESS_PROTOCOL_TEST
++	{1, &oid_null_function},			//0X14	OID_RT_PRO_SCSI_ACCESS_TEST
++	{1, &oid_null_function},			//0X15	OID_RT_PRO_SCSI_TCPIPOFFLOAD_OUT
++	{1, &oid_null_function},			//0X16	OID_RT_PRO_SCSI_TCPIPOFFLOAD_IN
++	{1, &oid_null_function},			//0X17	OID_RT_RRO_RX_PKT_VIA_IOCTRL
++	{1, &oid_null_function},			//0X18	OID_RT_RRO_RX_PKTARRAY_VIA_IOCTRL
++	{1, &oid_null_function},			//0X19	OID_RT_RPO_SET_PWRMGT_TEST
++	{1, &oid_null_function},			//0X1A
++	{1, &oid_null_function},			//0X1B	OID_RT_PRO_QRY_PWRMGT_TEST
++	{1, &oid_null_function},			//0X1C	OID_RT_RPO_ASYNC_RWIO_TEST
++	{1, &oid_null_function},			//0X1D	OID_RT_RPO_ASYNC_RWIO_POLL
++	{1, &oid_rt_pro_set_rf_intfs_hdl},		//0X1E
++	{1, &oid_rt_poll_rx_status_hdl}			//0X1F
++};
++
++struct oid_obj_priv oid_rtl_seg_87_11_20[] =
++{
++	{1, &oid_rt_pro_cfg_debug_message_hdl},		//0x20
++	{1, &oid_rt_pro_set_data_rate_ex_hdl},		//0x21
++	{1, &oid_rt_pro_set_basic_rate_hdl},		//0x22
++	{1, &oid_rt_pro_read_tssi_hdl},			//0x23
++	{1, &oid_rt_pro_set_power_tracking_hdl}		//0x24
++};
++
++
++struct oid_obj_priv oid_rtl_seg_87_11_50[] =
++{
++	{1, &oid_rt_pro_qry_pwrstate_hdl},		//0x50
++	{1, &oid_rt_pro_set_pwrstate_hdl}		//0x51
++};
++
++struct oid_obj_priv oid_rtl_seg_87_11_80[] =
++{
++	{1, &oid_null_function}				//0x80
++};
++
++struct oid_obj_priv oid_rtl_seg_87_11_B0[] =
++{
++	{1, &oid_null_function}				//0xB0
++};
++
++struct oid_obj_priv oid_rtl_seg_87_11_F0[] =
++{
++	{1, &oid_null_function},			//0xF0
++	{1, &oid_null_function},			//0xF1
++	{1, &oid_null_function},			//0xF2
++	{1, &oid_null_function},			//0xF3
++	{1, &oid_null_function},			//0xF4
++	{1, &oid_null_function},			//0xF5
++	{1, &oid_null_function},			//0xF6
++	{1, &oid_null_function},			//0xF7
++	{1, &oid_null_function},			//0xF8
++	{1, &oid_null_function},			//0xF9
++	{1, &oid_null_function},			//0xFA
++	{1, &oid_rt_pro_h2c_set_rate_table_hdl},	//0xFB
++	{1, &oid_rt_pro_h2c_get_rate_table_hdl},	//0xFC
++	{1, &oid_null_function},			//0xFD
++	{1, &oid_null_function},			//0xFE	OID_RT_PRO_H2C_C2H_LBK_TEST
++	{1, &oid_null_function}				//0xFF
++
++};
++
++struct oid_obj_priv oid_rtl_seg_87_12_00[]=
++{
++	{1, &oid_rt_pro_encryption_ctrl_hdl},		//0x00	Q&S
++	{1, &oid_rt_pro_add_sta_info_hdl},		//0x01	S
++	{1, &oid_rt_pro_dele_sta_info_hdl},		//0x02	S
++	{1, &oid_rt_pro_query_dr_variable_hdl},		//0x03	Q
++	{1, &oid_rt_pro_rx_packet_type_hdl},		//0x04	Q,S
++	{1, &oid_rt_pro_read_efuse_hdl},		//0x05	Q	OID_RT_PRO_READ_EFUSE
++	{1, &oid_rt_pro_write_efuse_hdl},		//0x06	S	OID_RT_PRO_WRITE_EFUSE
++	{1, &oid_rt_pro_rw_efuse_pgpkt_hdl},		//0x07	Q,S
++	{1, &oid_rt_get_efuse_current_size_hdl},	//0x08 	Q
++	{1, &oid_rt_set_bandwidth_hdl},			//0x09
++	{1, &oid_rt_set_crystal_cap_hdl},		//0x0a
++	{1, &oid_rt_set_rx_packet_type_hdl},		//0x0b	S
++	{1, &oid_rt_get_efuse_max_size_hdl},		//0x0c
++	{1, &oid_rt_pro_set_tx_agc_offset_hdl},		//0x0d
++	{1, &oid_rt_pro_set_pkt_test_mode_hdl},		//0x0e
++	{1, &oid_null_function},			//0x0f		OID_RT_PRO_FOR_EVM_TEST_SETTING
++	{1, &oid_rt_get_thermal_meter_hdl},		//0x10	Q	OID_RT_PRO_GET_THERMAL_METER
++	{1, &oid_rt_reset_phy_rx_packet_count_hdl},	//0x11	S	OID_RT_RESET_PHY_RX_PACKET_COUNT
++	{1, &oid_rt_get_phy_rx_packet_received_hdl},	//0x12	Q	OID_RT_GET_PHY_RX_PACKET_RECEIVED
++	{1, &oid_rt_get_phy_rx_packet_crc32_error_hdl},	//0x13	Q	OID_RT_GET_PHY_RX_PACKET_CRC32_ERROR
++	{1, &oid_rt_set_power_down_hdl},		//0x14	Q	OID_RT_SET_POWER_DOWN
++	{1, &oid_rt_get_power_mode_hdl}			//0x15	Q	OID_RT_GET_POWER_MODE
++};
++
++#else /* _RTL871X_MP_IOCTL_C_ */
++
++extern struct oid_obj_priv oid_rtl_seg_81_80_00[32];
++extern struct oid_obj_priv oid_rtl_seg_81_80_20[16];
++extern struct oid_obj_priv oid_rtl_seg_81_80_40[6];
++extern struct oid_obj_priv oid_rtl_seg_81_80_80[3];
++
++extern struct oid_obj_priv oid_rtl_seg_81_85[1];
++extern struct oid_obj_priv oid_rtl_seg_81_87[5];
++
++extern struct oid_obj_priv oid_rtl_seg_87_11_00[32];
++extern struct oid_obj_priv oid_rtl_seg_87_11_20[5];
++extern struct oid_obj_priv oid_rtl_seg_87_11_50[2];
++extern struct oid_obj_priv oid_rtl_seg_87_11_80[1];
++extern struct oid_obj_priv oid_rtl_seg_87_11_B0[1];
++extern struct oid_obj_priv oid_rtl_seg_87_11_F0[16];
++
++extern struct oid_obj_priv oid_rtl_seg_87_12_00[32];
++
++#endif /* _RTL871X_MP_IOCTL_C_ */
++
++struct rwreg_param{
++	u32 offset;
++	u32 width;
++	u32 value;
++};
++
++struct bbreg_param{
++	u32 offset;
++	u32 phymask;
++	u32 value;
++};
++/*
++struct rfchannel_param{
++	u32 ch;
++	u32 modem;
++};
++*/
++struct txpower_param{
++	u32 pwr_index;
++};
++
++
++struct datarate_param{
++	u32 rate_index;
++};
++
++
++struct rfintfs_parm {
++	u32 rfintfs;
++};
++
++typedef struct _mp_xmit_parm_ {
++	u8 enable;
++	u32 count;
++	u16 length;
++	u8 payload_type;
++	u8 da[ETH_ALEN];
++}MP_XMIT_PARM, *PMP_XMIT_PARM;
++
++struct mp_xmit_packet {
++	u32 len;
++	u32 mem[MAX_MP_XMITBUF_SZ >> 2];
++};
++
++struct psmode_param {
++	u32 ps_mode;
++	u32 smart_ps;
++};
++
++//for OID_RT_PRO_READ16_EEPROM & OID_RT_PRO_WRITE16_EEPROM
++struct eeprom_rw_param {
++	u32 offset;
++	u16 value;
++};
++
++struct mp_ioctl_handler {
++	u32 paramsize;
++	u32 (*handler)(struct oid_par_priv* poid_par_priv);
++	u32 oid;
++};
++
++struct mp_ioctl_param{
++	u32 subcode;
++	u32 len;
++	u8 data[0];
++};
++
++#define GEN_MP_IOCTL_SUBCODE(code) _MP_IOCTL_ ## code ## _CMD_
++
++enum RTL871X_MP_IOCTL_SUBCODE {
++	GEN_MP_IOCTL_SUBCODE(MP_START),			/*0*/
++	GEN_MP_IOCTL_SUBCODE(MP_STOP),
++	GEN_MP_IOCTL_SUBCODE(READ_REG),
++	GEN_MP_IOCTL_SUBCODE(WRITE_REG),
++	GEN_MP_IOCTL_SUBCODE(READ_BB_REG),
++	GEN_MP_IOCTL_SUBCODE(WRITE_BB_REG),		/*5*/
++	GEN_MP_IOCTL_SUBCODE(READ_RF_REG),
++	GEN_MP_IOCTL_SUBCODE(WRITE_RF_REG),
++	GEN_MP_IOCTL_SUBCODE(SET_CHANNEL),
++	GEN_MP_IOCTL_SUBCODE(SET_TXPOWER),
++	GEN_MP_IOCTL_SUBCODE(SET_DATARATE),		/*10*/
++	GEN_MP_IOCTL_SUBCODE(SET_BANDWIDTH),
++	GEN_MP_IOCTL_SUBCODE(SET_ANTENNA),
++	GEN_MP_IOCTL_SUBCODE(CNTU_TX),
++	GEN_MP_IOCTL_SUBCODE(SC_TX),
++	GEN_MP_IOCTL_SUBCODE(CS_TX),			/*15*/
++	GEN_MP_IOCTL_SUBCODE(ST_TX),
++	GEN_MP_IOCTL_SUBCODE(IOCTL_XMIT_PACKET),
++	GEN_MP_IOCTL_SUBCODE(SET_RX_PKT_TYPE),
++	GEN_MP_IOCTL_SUBCODE(RESET_PHY_RX_PKT_CNT),
++	GEN_MP_IOCTL_SUBCODE(GET_PHY_RX_PKT_RECV),	/*20*/
++	GEN_MP_IOCTL_SUBCODE(GET_PHY_RX_PKT_ERROR),
++	GEN_MP_IOCTL_SUBCODE(READ16_EEPROM),
++	GEN_MP_IOCTL_SUBCODE(WRITE16_EEPROM),
++	GEN_MP_IOCTL_SUBCODE(EFUSE),
++	GEN_MP_IOCTL_SUBCODE(EFUSE_MAP),		/*25*/
++	GEN_MP_IOCTL_SUBCODE(GET_EFUSE_MAX_SIZE),
++	GEN_MP_IOCTL_SUBCODE(GET_EFUSE_CURRENT_SIZE),
++	GEN_MP_IOCTL_SUBCODE(GET_THERMAL_METER),
++	GEN_MP_IOCTL_SUBCODE(SET_PTM),
++	GEN_MP_IOCTL_SUBCODE(SET_POWER_DOWN),		/*30*/
++	GEN_MP_IOCTL_SUBCODE(TRIGGER_GPIO),
++	GEN_MP_IOCTL_SUBCODE(SET_DM_BT),		/*35*/
++	GEN_MP_IOCTL_SUBCODE(DEL_BA),			/*36*/
++	GEN_MP_IOCTL_SUBCODE(GET_WIFI_STATUS),	/*37*/	
++	MAX_MP_IOCTL_SUBCODE,
++};
++
++u32 mp_ioctl_xmit_packet_hdl(struct oid_par_priv* poid_par_priv);
++
++#ifdef _RTW_MP_IOCTL_C_
++
++#define GEN_MP_IOCTL_HANDLER(sz, hdl, oid) {sz, hdl, oid},
++
++#define EXT_MP_IOCTL_HANDLER(sz, subcode, oid) {sz, mp_ioctl_ ## subcode ## _hdl, oid},
++
++
++struct mp_ioctl_handler mp_ioctl_hdl[] = {
++
++/*0*/	GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_pro_start_test_hdl, OID_RT_PRO_START_TEST)
++	GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_pro_stop_test_hdl, OID_RT_PRO_STOP_TEST)
++
++	GEN_MP_IOCTL_HANDLER(sizeof(struct rwreg_param), oid_rt_pro_read_register_hdl, OID_RT_PRO_READ_REGISTER)
++	GEN_MP_IOCTL_HANDLER(sizeof(struct rwreg_param), oid_rt_pro_write_register_hdl, OID_RT_PRO_WRITE_REGISTER)
++	GEN_MP_IOCTL_HANDLER(sizeof(struct bb_reg_param), oid_rt_pro_read_bb_reg_hdl, OID_RT_PRO_READ_BB_REG)
++/*5*/	GEN_MP_IOCTL_HANDLER(sizeof(struct bb_reg_param), oid_rt_pro_write_bb_reg_hdl, OID_RT_PRO_WRITE_BB_REG)
++	GEN_MP_IOCTL_HANDLER(sizeof(struct rf_reg_param), oid_rt_pro_read_rf_reg_hdl, OID_RT_PRO_RF_READ_REGISTRY)
++	GEN_MP_IOCTL_HANDLER(sizeof(struct rf_reg_param), oid_rt_pro_write_rf_reg_hdl, OID_RT_PRO_RF_WRITE_REGISTRY)
++
++	GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_pro_set_channel_direct_call_hdl, OID_RT_PRO_SET_CHANNEL_DIRECT_CALL)
++	GEN_MP_IOCTL_HANDLER(sizeof(struct txpower_param), oid_rt_pro_set_tx_power_control_hdl, OID_RT_PRO_SET_TX_POWER_CONTROL)
++/*10*/	GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_pro_set_data_rate_hdl, OID_RT_PRO_SET_DATA_RATE)
++	GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_set_bandwidth_hdl, OID_RT_SET_BANDWIDTH)
++	GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_pro_set_antenna_bb_hdl, OID_RT_PRO_SET_ANTENNA_BB)
++
++	GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_pro_set_continuous_tx_hdl, OID_RT_PRO_SET_CONTINUOUS_TX)
++	GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_pro_set_single_carrier_tx_hdl, OID_RT_PRO_SET_SINGLE_CARRIER_TX)
++/*15*/	GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_pro_set_carrier_suppression_tx_hdl, OID_RT_PRO_SET_CARRIER_SUPPRESSION_TX)
++	GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_pro_set_single_tone_tx_hdl, OID_RT_PRO_SET_SINGLE_TONE_TX)
++
++	EXT_MP_IOCTL_HANDLER(0, xmit_packet, 0)
++
++	GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_set_rx_packet_type_hdl, OID_RT_SET_RX_PACKET_TYPE)
++	GEN_MP_IOCTL_HANDLER(0, oid_rt_reset_phy_rx_packet_count_hdl, OID_RT_RESET_PHY_RX_PACKET_COUNT)
++/*20*/	GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_get_phy_rx_packet_received_hdl, OID_RT_GET_PHY_RX_PACKET_RECEIVED)
++	GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_get_phy_rx_packet_crc32_error_hdl, OID_RT_GET_PHY_RX_PACKET_CRC32_ERROR)
++
++	GEN_MP_IOCTL_HANDLER(sizeof(struct eeprom_rw_param), NULL, 0)
++	GEN_MP_IOCTL_HANDLER(sizeof(struct eeprom_rw_param), NULL, 0)
++	GEN_MP_IOCTL_HANDLER(sizeof(EFUSE_ACCESS_STRUCT), oid_rt_pro_efuse_hdl, OID_RT_PRO_EFUSE)
++/*25*/	GEN_MP_IOCTL_HANDLER(0, oid_rt_pro_efuse_map_hdl, OID_RT_PRO_EFUSE_MAP)
++	GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_get_efuse_max_size_hdl, OID_RT_GET_EFUSE_MAX_SIZE)
++	GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_get_efuse_current_size_hdl, OID_RT_GET_EFUSE_CURRENT_SIZE)
++
++	GEN_MP_IOCTL_HANDLER(sizeof(u32), oid_rt_get_thermal_meter_hdl, OID_RT_PRO_GET_THERMAL_METER)
++	GEN_MP_IOCTL_HANDLER(sizeof(u8), oid_rt_pro_set_power_tracking_hdl, OID_RT_PRO_SET_POWER_TRACKING)
++/*30*/	GEN_MP_IOCTL_HANDLER(sizeof(u8), oid_rt_set_power_down_hdl, OID_RT_SET_POWER_DOWN)
++/*31*/	GEN_MP_IOCTL_HANDLER(0, oid_rt_pro_trigger_gpio_hdl, 0)
++
++
++};
++
++#else /* _RTW_MP_IOCTL_C_ */
++
++extern struct mp_ioctl_handler mp_ioctl_hdl[];
++
++#endif /* _RTW_MP_IOCTL_C_ */
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_mp_phy_regdef.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_mp_phy_regdef.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_mp_phy_regdef.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_mp_phy_regdef.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,1097 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++/*****************************************************************************
++ *
++ * Module:	__RTW_MP_PHY_REGDEF_H_
++ *
++ *
++ * Note:	1. Define PMAC/BB register map
++ *			2. Define RF register map
++ *			3. PMAC/BB register bit mask.
++ *			4. RF reg bit mask.
++ *			5. Other BB/RF relative definition.
++ *			
++ *
++ * Export:	Constants, macro, functions(API), global variables(None).
++ *
++ * Abbrev:	
++ *
++ * History:
++ *	Data			Who		Remark 
++ *	08/07/2007	MHC		1. Porting from 9x series PHYCFG.h.
++ *						2. Reorganize code architecture.
++ *	09/25/2008	MH		1. Add RL6052 register definition
++ * 
++ *****************************************************************************/
++#ifndef __RTW_MP_PHY_REGDEF_H_
++#define __RTW_MP_PHY_REGDEF_H_
++
++
++/*--------------------------Define Parameters-------------------------------*/
++
++//============================================================
++//       8192S Regsiter offset definition
++//============================================================
++
++//
++// BB-PHY register PMAC 0x100 PHY 0x800 - 0xEFF
++// 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF
++// 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00
++// 3. RF register 0x00-2E
++// 4. Bit Mask for BB/RF register
++// 5. Other defintion for BB/RF R/W
++//
++
++
++//
++// 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF
++// 1. Page1(0x100)
++//
++#define		rPMAC_Reset					0x100
++#define		rPMAC_TxStart					0x104
++#define		rPMAC_TxLegacySIG				0x108
++#define		rPMAC_TxHTSIG1				0x10c
++#define		rPMAC_TxHTSIG2				0x110
++#define		rPMAC_PHYDebug				0x114
++#define		rPMAC_TxPacketNum				0x118
++#define		rPMAC_TxIdle					0x11c
++#define		rPMAC_TxMACHeader0			0x120
++#define		rPMAC_TxMACHeader1			0x124
++#define		rPMAC_TxMACHeader2			0x128
++#define		rPMAC_TxMACHeader3			0x12c
++#define		rPMAC_TxMACHeader4			0x130
++#define		rPMAC_TxMACHeader5			0x134
++#define		rPMAC_TxDataType				0x138
++#define		rPMAC_TxRandomSeed			0x13c
++#define		rPMAC_CCKPLCPPreamble			0x140
++#define		rPMAC_CCKPLCPHeader			0x144
++#define		rPMAC_CCKCRC16				0x148
++#define		rPMAC_OFDMRxCRC32OK			0x170
++#define		rPMAC_OFDMRxCRC32Er			0x174
++#define		rPMAC_OFDMRxParityEr			0x178
++#define		rPMAC_OFDMRxCRC8Er			0x17c
++#define		rPMAC_CCKCRxRC16Er			0x180
++#define		rPMAC_CCKCRxRC32Er			0x184
++#define		rPMAC_CCKCRxRC32OK			0x188
++#define		rPMAC_TxStatus					0x18c
++
++//
++// 2. Page2(0x200)
++//
++// The following two definition are only used for USB interface.
++//#define		RF_BB_CMD_ADDR				0x02c0	// RF/BB read/write command address.
++//#define		RF_BB_CMD_DATA				0x02c4	// RF/BB read/write command data.
++
++//
++// 3. Page8(0x800)
++//
++#define		rFPGA0_RFMOD				0x800	//RF mode & CCK TxSC // RF BW Setting??
++
++#define		rFPGA0_TxInfo				0x804	// Status report??
++#define		rFPGA0_PSDFunction			0x808
++
++#define		rFPGA0_TxGainStage			0x80c	// Set TX PWR init gain?
++
++#define		rFPGA0_RFTiming1			0x810	// Useless now
++#define		rFPGA0_RFTiming2			0x814
++//#define rFPGA0_XC_RFTiming        		0x818
++//#define rFPGA0_XD_RFTiming        		0x81c
++
++#define		rFPGA0_XA_HSSIParameter1		0x820	// RF 3 wire register
++#define		rFPGA0_XA_HSSIParameter2		0x824
++#define		rFPGA0_XB_HSSIParameter1		0x828
++#define		rFPGA0_XB_HSSIParameter2		0x82c
++#define		rFPGA0_XC_HSSIParameter1		0x830
++#define		rFPGA0_XC_HSSIParameter2		0x834
++#define		rFPGA0_XD_HSSIParameter1		0x838
++#define		rFPGA0_XD_HSSIParameter2		0x83c
++#define		rFPGA0_XA_LSSIParameter		0x840
++#define		rFPGA0_XB_LSSIParameter		0x844
++#define		rFPGA0_XC_LSSIParameter		0x848
++#define		rFPGA0_XD_LSSIParameter		0x84c
++
++#define		rFPGA0_RFWakeUpParameter		0x850	// Useless now
++#define		rFPGA0_RFSleepUpParameter		0x854
++
++#define		rFPGA0_XAB_SwitchControl		0x858	// RF Channel switch
++#define		rFPGA0_XCD_SwitchControl		0x85c
++
++#define		rFPGA0_XA_RFInterfaceOE		0x860	// RF Channel switch
++#define		rFPGA0_XB_RFInterfaceOE		0x864
++#define		rFPGA0_XC_RFInterfaceOE		0x868
++#define		rFPGA0_XD_RFInterfaceOE		0x86c
++
++#define		rFPGA0_XAB_RFInterfaceSW		0x870	// RF Interface Software Control
++#define		rFPGA0_XCD_RFInterfaceSW		0x874
++
++#define		rFPGA0_XAB_RFParameter		0x878	// RF Parameter
++#define		rFPGA0_XCD_RFParameter		0x87c
++
++#define		rFPGA0_AnalogParameter1		0x880	// Crystal cap setting RF-R/W protection for parameter4??
++#define		rFPGA0_AnalogParameter2		0x884
++#define		rFPGA0_AnalogParameter3		0x888	// Useless now
++#define		rFPGA0_AnalogParameter4		0x88c
++
++#define		rFPGA0_XA_LSSIReadBack		0x8a0	// Tranceiver LSSI Readback
++#define		rFPGA0_XB_LSSIReadBack		0x8a4
++#define		rFPGA0_XC_LSSIReadBack		0x8a8
++#define		rFPGA0_XD_LSSIReadBack		0x8ac
++
++#define		rFPGA0_PSDReport				0x8b4	// Useless now
++#define		rFPGA0_XAB_RFInterfaceRB		0x8e0	// Useless now // RF Interface Readback Value
++#define		rFPGA0_XCD_RFInterfaceRB		0x8e4	// Useless now
++
++//
++// 4. Page9(0x900)
++//
++#define		rFPGA1_RFMOD				0x900	//RF mode & OFDM TxSC // RF BW Setting??
++
++#define		rFPGA1_TxBlock				0x904	// Useless now
++#define		rFPGA1_DebugSelect			0x908	// Useless now
++#define		rFPGA1_TxInfo				0x90c	// Useless now // Status report??
++
++//
++// 5. PageA(0xA00)
++//
++// Set Control channel to upper or lower. These settings are required only for 40MHz
++#define		rCCK0_System				0xa00
++
++#define		rCCK0_AFESetting			0xa04	// Disable init gain now // Select RX path by RSSI
++#define		rCCK0_CCA					0xa08	// Disable init gain now // Init gain
++
++#define		rCCK0_RxAGC1				0xa0c 	//AGC default value, saturation level // Antenna Diversity, RX AGC, LNA Threshold, RX LNA Threshold useless now. Not the same as 90 series
++#define		rCCK0_RxAGC2				0xa10 	//AGC & DAGC
++
++#define		rCCK0_RxHP					0xa14
++
++#define		rCCK0_DSPParameter1		0xa18	//Timing recovery & Channel estimation threshold
++#define		rCCK0_DSPParameter2		0xa1c	//SQ threshold
++
++#define		rCCK0_TxFilter1				0xa20
++#define		rCCK0_TxFilter2				0xa24
++#define		rCCK0_DebugPort			0xa28	//debug port and Tx filter3
++#define		rCCK0_FalseAlarmReport		0xa2c	//0xa2d	useless now 0xa30-a4f channel report
++#define		rCCK0_TRSSIReport         		0xa50
++#define		rCCK0_RxReport            		0xa54  //0xa57
++#define		rCCK0_FACounterLower      	0xa5c  //0xa5b
++#define		rCCK0_FACounterUpper      	0xa58  //0xa5c
++
++//
++// 6. PageC(0xC00)
++//
++#define		rOFDM0_LSTF				0xc00
++
++#define		rOFDM0_TRxPathEnable		0xc04
++#define		rOFDM0_TRMuxPar			0xc08
++#define		rOFDM0_TRSWIsolation		0xc0c
++
++#define		rOFDM0_XARxAFE			0xc10  //RxIQ DC offset, Rx digital filter, DC notch filter
++#define		rOFDM0_XARxIQImbalance    	0xc14  //RxIQ imblance matrix
++#define		rOFDM0_XBRxAFE            		0xc18
++#define		rOFDM0_XBRxIQImbalance    	0xc1c
++#define		rOFDM0_XCRxAFE            		0xc20
++#define		rOFDM0_XCRxIQImbalance    	0xc24
++#define		rOFDM0_XDRxAFE            		0xc28
++#define		rOFDM0_XDRxIQImbalance    	0xc2c
++
++#define		rOFDM0_RxDetector1			0xc30  //PD,BW & SBD	// DM tune init gain
++#define		rOFDM0_RxDetector2			0xc34  //SBD & Fame Sync. 
++#define		rOFDM0_RxDetector3			0xc38  //Frame Sync.
++#define		rOFDM0_RxDetector4			0xc3c  //PD, SBD, Frame Sync & Short-GI
++
++#define		rOFDM0_RxDSP				0xc40  //Rx Sync Path
++#define		rOFDM0_CFOandDAGC		0xc44  //CFO & DAGC
++#define		rOFDM0_CCADropThreshold	0xc48 //CCA Drop threshold
++#define		rOFDM0_ECCAThreshold		0xc4c // energy CCA
++
++#define		rOFDM0_XAAGCCore1			0xc50	// DIG  
++#define		rOFDM0_XAAGCCore2			0xc54
++#define		rOFDM0_XBAGCCore1			0xc58
++#define		rOFDM0_XBAGCCore2			0xc5c
++#define		rOFDM0_XCAGCCore1			0xc60
++#define		rOFDM0_XCAGCCore2			0xc64
++#define		rOFDM0_XDAGCCore1			0xc68
++#define		rOFDM0_XDAGCCore2			0xc6c
++
++#define		rOFDM0_AGCParameter1			0xc70
++#define		rOFDM0_AGCParameter2			0xc74
++#define		rOFDM0_AGCRSSITable			0xc78
++#define		rOFDM0_HTSTFAGC				0xc7c
++
++#define		rOFDM0_XATxIQImbalance		0xc80	// TX PWR TRACK and DIG
++#define		rOFDM0_XATxAFE				0xc84
++#define		rOFDM0_XBTxIQImbalance		0xc88
++#define		rOFDM0_XBTxAFE				0xc8c
++#define		rOFDM0_XCTxIQImbalance		0xc90
++#define		rOFDM0_XCTxAFE            			0xc94
++#define		rOFDM0_XDTxIQImbalance		0xc98
++#define		rOFDM0_XDTxAFE				0xc9c
++#define		rOFDM0_RxIQExtAnta			0xca0
++
++#define		rOFDM0_RxHPParameter			0xce0
++#define		rOFDM0_TxPseudoNoiseWgt		0xce4
++#define		rOFDM0_FrameSync				0xcf0
++#define		rOFDM0_DFSReport				0xcf4
++#define		rOFDM0_TxCoeff1				0xca4
++#define		rOFDM0_TxCoeff2				0xca8
++#define		rOFDM0_TxCoeff3				0xcac
++#define		rOFDM0_TxCoeff4				0xcb0
++#define		rOFDM0_TxCoeff5				0xcb4
++#define		rOFDM0_TxCoeff6				0xcb8
++
++
++//
++// 7. PageD(0xD00)
++//
++#define		rOFDM1_LSTF					0xd00
++#define		rOFDM1_TRxPathEnable			0xd04
++
++#define		rOFDM1_CFO						0xd08	// No setting now
++#define		rOFDM1_CSI1					0xd10
++#define		rOFDM1_SBD						0xd14
++#define		rOFDM1_CSI2					0xd18
++#define		rOFDM1_CFOTracking			0xd2c
++#define		rOFDM1_TRxMesaure1			0xd34
++#define		rOFDM1_IntfDet					0xd3c
++#define		rOFDM1_PseudoNoiseStateAB		0xd50
++#define		rOFDM1_PseudoNoiseStateCD		0xd54
++#define		rOFDM1_RxPseudoNoiseWgt		0xd58
++
++#define		rOFDM_PHYCounter1				0xda0  //cca, parity fail
++#define		rOFDM_PHYCounter2				0xda4  //rate illegal, crc8 fail
++#define		rOFDM_PHYCounter3				0xda8  //MCS not support
++
++#define		rOFDM_ShortCFOAB				0xdac	// No setting now
++#define		rOFDM_ShortCFOCD				0xdb0
++#define		rOFDM_LongCFOAB				0xdb4
++#define		rOFDM_LongCFOCD				0xdb8
++#define		rOFDM_TailCFOAB				0xdbc
++#define		rOFDM_TailCFOCD				0xdc0
++#define		rOFDM_PWMeasure1          		0xdc4
++#define		rOFDM_PWMeasure2          		0xdc8
++#define		rOFDM_BWReport				0xdcc
++#define		rOFDM_AGCReport				0xdd0
++#define		rOFDM_RxSNR					0xdd4
++#define		rOFDM_RxEVMCSI				0xdd8
++#define		rOFDM_SIGReport				0xddc
++
++
++//
++// 8. PageE(0xE00)
++//
++#define		rTxAGC_Rate18_06				0xe00
++#define		rTxAGC_Rate54_24				0xe04
++#define		rTxAGC_CCK_Mcs32				0xe08
++#define		rTxAGC_Mcs03_Mcs00			0xe10
++#define		rTxAGC_Mcs07_Mcs04			0xe14
++#define		rTxAGC_Mcs11_Mcs08			0xe18
++#define		rTxAGC_Mcs15_Mcs12			0xe1c
++
++// Analog- control in RX_WAIT_CCA : REG: EE0 [Analog- Power & Control Register]
++#define 		rRx_Wait_CCCA					0xe70
++#define		rAnapar_Ctrl_BB					0xee0
++
++//
++// 7. RF Register 0x00-0x2E (RF 8256)
++//    RF-0222D 0x00-3F
++//
++//Zebra1
++#define RTL92SE_FPGA_VERIFY 0
++#define		rZebra1_HSSIEnable				0x0	// Useless now
++#define		rZebra1_TRxEnable1				0x1
++#define		rZebra1_TRxEnable2				0x2
++#define		rZebra1_AGC					0x4
++#define		rZebra1_ChargePump			0x5
++//#if (RTL92SE_FPGA_VERIFY == 1)
++#define		rZebra1_Channel				0x7	// RF channel switch
++//#else
++
++//#endif
++#define		rZebra1_TxGain					0x8	// Useless now
++#define		rZebra1_TxLPF					0x9
++#define		rZebra1_RxLPF					0xb
++#define		rZebra1_RxHPFCorner			0xc
++
++//Zebra4
++#define		rGlobalCtrl						0	// Useless now
++#define		rRTL8256_TxLPF					19
++#define		rRTL8256_RxLPF					11
++
++//RTL8258
++#define		rRTL8258_TxLPF					0x11	// Useless now
++#define		rRTL8258_RxLPF					0x13
++#define		rRTL8258_RSSILPF				0xa
++
++//
++// RL6052 Register definition
++//
++#define		RF_AC						0x00	// 
++
++#define		RF_IQADJ_G1				0x01	// 
++#define		RF_IQADJ_G2				0x02	// 
++#define		RF_POW_TRSW				0x05	// 
++
++#define		RF_GAIN_RX					0x06	// 
++#define		RF_GAIN_TX					0x07	// 
++
++#define		RF_TXM_IDAC				0x08	// 
++#define		RF_BS_IQGEN				0x0F	// 
++
++#define		RF_MODE1					0x10	// 
++#define		RF_MODE2					0x11	// 
++
++#define		RF_RX_AGC_HP				0x12	// 
++#define		RF_TX_AGC					0x13	// 
++#define		RF_BIAS						0x14	// 
++#define		RF_IPA						0x15	// 
++#define		RF_POW_ABILITY			0x17	// 
++#define		RF_MODE_AG				0x18	// 
++#define		rRfChannel					0x18	// RF channel and BW switch
++#define		RF_CHNLBW					0x18	// RF channel and BW switch
++#define		RF_TOP						0x19	// 
++
++#define		RF_RX_G1					0x1A	// 
++#define		RF_RX_G2					0x1B	// 
++
++#define		RF_RX_BB2					0x1C	// 
++#define		RF_RX_BB1					0x1D	// 
++
++#define		RF_RCK1					0x1E	// 
++#define		RF_RCK2					0x1F	// 
++
++#define		RF_TX_G1					0x20	// 
++#define		RF_TX_G2					0x21	// 
++#define		RF_TX_G3					0x22	// 
++
++#define		RF_TX_BB1					0x23	// 
++
++#define		RF_T_METER					0x24	// 
++
++#define		RF_SYN_G1					0x25	// RF TX Power control
++#define		RF_SYN_G2					0x26	// RF TX Power control
++#define		RF_SYN_G3					0x27	// RF TX Power control
++#define		RF_SYN_G4					0x28	// RF TX Power control
++#define		RF_SYN_G5					0x29	// RF TX Power control
++#define		RF_SYN_G6					0x2A	// RF TX Power control
++#define		RF_SYN_G7					0x2B	// RF TX Power control
++#define		RF_SYN_G8					0x2C	// RF TX Power control
++
++#define		RF_RCK_OS					0x30	// RF TX PA control
++
++#define		RF_TXPA_G1					0x31	// RF TX PA control
++#define		RF_TXPA_G2					0x32	// RF TX PA control
++#define		RF_TXPA_G3					0x33	// RF TX PA control
++
++//
++//Bit Mask
++//
++// 1. Page1(0x100)
++#define		bBBResetB						0x100	// Useless now?
++#define		bGlobalResetB					0x200
++#define		bOFDMTxStart					0x4
++#define		bCCKTxStart						0x8
++#define		bCRC32Debug					0x100
++#define		bPMACLoopback					0x10
++#define		bTxLSIG							0xffffff
++#define		bOFDMTxRate					0xf
++#define		bOFDMTxReserved				0x10
++#define		bOFDMTxLength					0x1ffe0
++#define		bOFDMTxParity					0x20000
++#define		bTxHTSIG1						0xffffff
++#define		bTxHTMCSRate					0x7f
++#define		bTxHTBW						0x80
++#define		bTxHTLength					0xffff00
++#define		bTxHTSIG2						0xffffff
++#define		bTxHTSmoothing					0x1
++#define		bTxHTSounding					0x2
++#define		bTxHTReserved					0x4
++#define		bTxHTAggreation				0x8
++#define		bTxHTSTBC						0x30
++#define		bTxHTAdvanceCoding			0x40
++#define		bTxHTShortGI					0x80
++#define		bTxHTNumberHT_LTF			0x300
++#define		bTxHTCRC8						0x3fc00
++#define		bCounterReset					0x10000
++#define		bNumOfOFDMTx					0xffff
++#define		bNumOfCCKTx					0xffff0000
++#define		bTxIdleInterval					0xffff
++#define		bOFDMService					0xffff0000
++#define		bTxMACHeader					0xffffffff
++#define		bTxDataInit						0xff
++#define		bTxHTMode						0x100
++#define		bTxDataType					0x30000
++#define		bTxRandomSeed					0xffffffff
++#define		bCCKTxPreamble					0x1
++#define		bCCKTxSFD						0xffff0000
++#define		bCCKTxSIG						0xff
++#define		bCCKTxService					0xff00
++#define		bCCKLengthExt					0x8000
++#define		bCCKTxLength					0xffff0000
++#define		bCCKTxCRC16					0xffff
++#define		bCCKTxStatus					0x1
++#define		bOFDMTxStatus					0x2
++
++#define 		IS_BB_REG_OFFSET_92S(_Offset)		((_Offset >= 0x800) && (_Offset <= 0xfff))
++
++// 2. Page8(0x800)
++#define		bRFMOD							0x1	// Reg 0x800 rFPGA0_RFMOD
++#define		bJapanMode						0x2
++#define		bCCKTxSC						0x30
++#define		bCCKEn							0x1000000
++#define		bOFDMEn						0x2000000
++
++#define		bOFDMRxADCPhase           		0x10000	// Useless now
++#define		bOFDMTxDACPhase           		0x40000
++#define		bXATxAGC                  			0x3f
++
++#define		bXBTxAGC                  			0xf00	// Reg 80c rFPGA0_TxGainStage
++#define		bXCTxAGC                  			0xf000
++#define		bXDTxAGC                  			0xf0000
++       		
++#define		bPAStart                  			0xf0000000	// Useless now
++#define		bTRStart                  			0x00f00000
++#define		bRFStart                  			0x0000f000
++#define		bBBStart                  			0x000000f0
++#define		bBBCCKStart               		0x0000000f
++#define		bPAEnd                    			0xf          //Reg0x814
++#define		bTREnd                    			0x0f000000
++#define		bRFEnd                    			0x000f0000
++#define		bCCAMask                  			0x000000f0   //T2R
++#define		bR2RCCAMask               		0x00000f00
++#define		bHSSI_R2TDelay            		0xf8000000
++#define		bHSSI_T2RDelay            		0xf80000
++#define		bContTxHSSI               		0x400     //chane gain at continue Tx
++#define		bIGFromCCK                		0x200
++#define		bAGCAddress               		0x3f
++#define		bRxHPTx                   			0x7000
++#define		bRxHPT2R                  			0x38000
++#define		bRxHPCCKIni               		0xc0000
++#define		bAGCTxCode                		0xc00000
++#define		bAGCRxCode                		0x300000
++
++#define		b3WireDataLength          		0x800	// Reg 0x820~84f rFPGA0_XA_HSSIParameter1
++#define		b3WireAddressLength       		0x400
++
++#define		b3WireRFPowerDown         		0x1	// Useless now
++//#define bHWSISelect               		0x8
++#define		b5GPAPEPolarity           		0x40000000
++#define		b2GPAPEPolarity           		0x80000000
++#define		bRFSW_TxDefaultAnt        		0x3
++#define		bRFSW_TxOptionAnt         		0x30
++#define		bRFSW_RxDefaultAnt        		0x300
++#define		bRFSW_RxOptionAnt         		0x3000
++#define		bRFSI_3WireData           		0x1
++#define		bRFSI_3WireClock          		0x2
++#define		bRFSI_3WireLoad           		0x4
++#define		bRFSI_3WireRW             		0x8
++#define		bRFSI_3Wire               			0xf
++
++#define		bRFSI_RFENV               		0x10	// Reg 0x870 rFPGA0_XAB_RFInterfaceSW
++
++#define		bRFSI_TRSW                		0x20	// Useless now
++#define		bRFSI_TRSWB               		0x40
++#define		bRFSI_ANTSW               		0x100
++#define		bRFSI_ANTSWB              		0x200
++#define		bRFSI_PAPE                			0x400
++#define		bRFSI_PAPE5G              		0x800 
++#define		bBandSelect               			0x1
++#define		bHTSIG2_GI                			0x80
++#define		bHTSIG2_Smoothing         		0x01
++#define		bHTSIG2_Sounding          		0x02
++#define		bHTSIG2_Aggreaton         		0x08
++#define		bHTSIG2_STBC              		0x30
++#define		bHTSIG2_AdvCoding         		0x40
++#define		bHTSIG2_NumOfHTLTF        	0x300
++#define		bHTSIG2_CRC8              		0x3fc
++#define		bHTSIG1_MCS               		0x7f
++#define		bHTSIG1_BandWidth         		0x80
++#define		bHTSIG1_HTLength          		0xffff
++#define		bLSIG_Rate                			0xf
++#define		bLSIG_Reserved            		0x10
++#define		bLSIG_Length              		0x1fffe
++#define		bLSIG_Parity              			0x20
++#define		bCCKRxPhase               		0x4
++#if (RTL92SE_FPGA_VERIFY == 1)
++#define		bLSSIReadAddress          		0x3f000000   //LSSI "Read" Address	// Reg 0x824 rFPGA0_XA_HSSIParameter2
++#else
++#define		bLSSIReadAddress          		0x7f800000   // T65 RF
++#endif
++#define		bLSSIReadEdge             		0x80000000   //LSSI "Read" edge signal
++#if (RTL92SE_FPGA_VERIFY == 1)
++#define		bLSSIReadBackData         		0xfff		// Reg 0x8a0 rFPGA0_XA_LSSIReadBack
++#else
++#define		bLSSIReadBackData         		0xfffff		// T65 RF
++#endif
++#define		bLSSIReadOKFlag           		0x1000	// Useless now
++#define		bCCKSampleRate            		0x8       //0: 44MHz, 1:88MHz       		
++#define		bRegulator0Standby        		0x1
++#define		bRegulatorPLLStandby      		0x2
++#define		bRegulator1Standby        		0x4
++#define		bPLLPowerUp               		0x8
++#define		bDPLLPowerUp              		0x10
++#define		bDA10PowerUp              		0x20
++#define		bAD7PowerUp               		0x200
++#define		bDA6PowerUp               		0x2000
++#define		bXtalPowerUp              		0x4000
++#define		b40MDClkPowerUP           		0x8000
++#define		bDA6DebugMode             		0x20000
++#define		bDA6Swing                 			0x380000
++
++#define		bADClkPhase               		0x4000000	// Reg 0x880 rFPGA0_AnalogParameter1 20/40 CCK support switch 40/80 BB MHZ
++
++#define		b80MClkDelay              		0x18000000	// Useless
++#define		bAFEWatchDogEnable        		0x20000000
++
++#define		bXtalCap01                			0xc0000000	// Reg 0x884 rFPGA0_AnalogParameter2 Crystal cap
++#define		bXtalCap23                			0x3
++#define		bXtalCap92x					0x0f000000
++#define 		bXtalCap                			0x0f000000
++
++#define		bIntDifClkEnable          		0x400	// Useless
++#define		bExtSigClkEnable         	 	0x800
++#define		bBandgapMbiasPowerUp      	0x10000
++#define		bAD11SHGain               		0xc0000
++#define		bAD11InputRange           		0x700000
++#define		bAD11OPCurrent            		0x3800000
++#define		bIPathLoopback            		0x4000000
++#define		bQPathLoopback            		0x8000000
++#define		bAFELoopback              		0x10000000
++#define		bDA10Swing                		0x7e0
++#define		bDA10Reverse              		0x800
++#define		bDAClkSource              		0x1000
++#define		bAD7InputRange            		0x6000
++#define		bAD7Gain                  			0x38000
++#define		bAD7OutputCMMode          		0x40000
++#define		bAD7InputCMMode           		0x380000
++#define		bAD7Current               			0xc00000
++#define		bRegulatorAdjust          		0x7000000
++#define		bAD11PowerUpAtTx          		0x1
++#define		bDA10PSAtTx               		0x10
++#define		bAD11PowerUpAtRx          		0x100
++#define		bDA10PSAtRx               		0x1000       		
++#define		bCCKRxAGCFormat           		0x200       		
++#define		bPSDFFTSamplepPoint       		0xc000
++#define		bPSDAverageNum            		0x3000
++#define		bIQPathControl            		0xc00
++#define		bPSDFreq                  			0x3ff
++#define		bPSDAntennaPath           		0x30
++#define		bPSDIQSwitch              		0x40
++#define		bPSDRxTrigger             		0x400000
++#define		bPSDTxTrigger             		0x80000000
++#define		bPSDSineToneScale        		0x7f000000
++#define		bPSDReport                			0xffff
++
++// 3. Page9(0x900)
++#define		bOFDMTxSC                 		0x30000000	// Useless
++#define		bCCKTxOn                  			0x1
++#define		bOFDMTxOn                 		0x2
++#define		bDebugPage                		0xfff  //reset debug page and also HWord, LWord
++#define		bDebugItem                		0xff   //reset debug page and LWord
++#define		bAntL              	       		0x10
++#define		bAntNonHT           	      			0x100
++#define		bAntHT1               			0x1000
++#define		bAntHT2                   			0x10000
++#define		bAntHT1S1                 			0x100000
++#define		bAntNonHTS1               		0x1000000
++
++// 4. PageA(0xA00)
++#define		bCCKBBMode                		0x3	// Useless
++#define		bCCKTxPowerSaving         		0x80
++#define		bCCKRxPowerSaving         		0x40
++
++#define		bCCKSideBand              		0x10	// Reg 0xa00 rCCK0_System 20/40 switch
++
++#define		bCCKScramble              		0x8	// Useless
++#define		bCCKAntDiversity    		      	0x8000
++#define		bCCKCarrierRecovery   	    	0x4000
++#define		bCCKTxRate           		     	0x3000
++#define		bCCKDCCancel             	 	0x0800
++#define		bCCKISICancel             		0x0400
++#define		bCCKMatchFilter           		0x0200
++#define		bCCKEqualizer             		0x0100
++#define		bCCKPreambleDetect       	 	0x800000
++#define		bCCKFastFalseCCA          		0x400000
++#define		bCCKChEstStart            		0x300000
++#define		bCCKCCACount              		0x080000
++#define		bCCKcs_lim                			0x070000
++#define		bCCKBistMode              		0x80000000
++#define		bCCKCCAMask             	  	0x40000000
++#define		bCCKTxDACPhase         	   	0x4
++#define		bCCKRxADCPhase         	   	0x20000000   //r_rx_clk
++#define		bCCKr_cp_mode0         	   	0x0100
++#define		bCCKTxDCOffset           	 	0xf0
++#define		bCCKRxDCOffset           	 	0xf
++#define		bCCKCCAMode              	 	0xc000
++#define		bCCKFalseCS_lim           		0x3f00
++#define		bCCKCS_ratio              		0xc00000
++#define		bCCKCorgBit_sel           		0x300000
++#define		bCCKPD_lim                			0x0f0000
++#define		bCCKNewCCA                		0x80000000
++#define		bCCKRxHPofIG              		0x8000
++#define		bCCKRxIG                  			0x7f00
++#define		bCCKLNAPolarity           		0x800000
++#define		bCCKRx1stGain             		0x7f0000
++#define		bCCKRFExtend              		0x20000000 //CCK Rx Iinital gain polarity
++#define		bCCKRxAGCSatLevel        	 	0x1f000000
++#define		bCCKRxAGCSatCount       	  	0xe0
++#define		bCCKRxRFSettle            		0x1f       //AGCsamp_dly
++#define		bCCKFixedRxAGC           	 	0x8000
++//#define bCCKRxAGCFormat         	 	0x4000   //remove to HSSI register 0x824
++#define		bCCKAntennaPolarity      	 	0x2000
++#define		bCCKTxFilterType          		0x0c00
++#define		bCCKRxAGCReportType   	   	0x0300
++#define		bCCKRxDAGCEn              		0x80000000
++#define		bCCKRxDAGCPeriod        	  	0x20000000
++#define		bCCKRxDAGCSatLevel     	   	0x1f000000
++#define		bCCKTimingRecovery       	 	0x800000
++#define		bCCKTxC0                  			0x3f0000
++#define		bCCKTxC1                  			0x3f000000
++#define		bCCKTxC2                  			0x3f
++#define		bCCKTxC3                  			0x3f00
++#define		bCCKTxC4                  			0x3f0000
++#define		bCCKTxC5                  			0x3f000000
++#define		bCCKTxC6                  			0x3f
++#define		bCCKTxC7                  			0x3f00
++#define		bCCKDebugPort             		0xff0000
++#define		bCCKDACDebug              		0x0f000000
++#define		bCCKFalseAlarmEnable      		0x8000
++#define		bCCKFalseAlarmRead        		0x4000
++#define		bCCKTRSSI                 			0x7f
++#define		bCCKRxAGCReport           		0xfe
++#define		bCCKRxReport_AntSel       		0x80000000
++#define		bCCKRxReport_MFOff        		0x40000000
++#define		bCCKRxRxReport_SQLoss     	0x20000000
++#define		bCCKRxReport_Pktloss      		0x10000000
++#define		bCCKRxReport_Lockedbit    	0x08000000
++#define		bCCKRxReport_RateError    	0x04000000
++#define		bCCKRxReport_RxRate       		0x03000000
++#define		bCCKRxFACounterLower      	0xff
++#define		bCCKRxFACounterUpper      	0xff000000
++#define		bCCKRxHPAGCStart          		0xe000
++#define		bCCKRxHPAGCFinal          		0x1c00       		
++#define		bCCKRxFalseAlarmEnable    	0x8000
++#define		bCCKFACounterFreeze       		0x4000       		
++#define		bCCKTxPathSel             		0x10000000
++#define		bCCKDefaultRxPath         		0xc000000
++#define		bCCKOptionRxPath          		0x3000000
++
++// 5. PageC(0xC00)
++#define		bNumOfSTF                			0x3	// Useless
++#define		bShift_L                 			0xc0
++#define		bGI_TH                   			0xc
++#define		bRxPathA                 			0x1
++#define		bRxPathB                 			0x2
++#define		bRxPathC                 			0x4
++#define		bRxPathD                 			0x8
++#define		bTxPathA                 			0x1
++#define		bTxPathB                 			0x2
++#define		bTxPathC                 			0x4
++#define		bTxPathD                 			0x8
++#define		bTRSSIFreq               			0x200
++#define		bADCBackoff              			0x3000
++#define		bDFIRBackoff             			0xc000
++#define		bTRSSILatchPhase         		0x10000
++#define		bRxIDCOffset             			0xff
++#define		bRxQDCOffset             			0xff00
++#define		bRxDFIRMode              		0x1800000
++#define		bRxDCNFType              		0xe000000
++#define		bRXIQImb_A               			0x3ff
++#define		bRXIQImb_B               			0xfc00
++#define		bRXIQImb_C               			0x3f0000
++#define		bRXIQImb_D               			0xffc00000
++#define		bDC_dc_Notch             		0x60000
++#define		bRxNBINotch              			0x1f000000
++#define		bPD_TH                   			0xf
++#define		bPD_TH_Opt2              		0xc000
++#define		bPWED_TH                 			0x700
++#define		bIfMF_Win_L              			0x800
++#define		bPD_Option               			0x1000
++#define		bMF_Win_L                			0xe000
++#define		bBW_Search_L             		0x30000
++#define		bwin_enh_L               			0xc0000
++#define		bBW_TH                   			0x700000
++#define		bED_TH2                  			0x3800000
++#define		bBW_option               			0x4000000
++#define		bRatio_TH                			0x18000000
++#define		bWindow_L                			0xe0000000
++#define		bSBD_Option              			0x1
++#define		bFrame_TH                			0x1c
++#define		bFS_Option               			0x60
++#define		bDC_Slope_check          		0x80
++#define		bFGuard_Counter_DC_L     		0xe00
++#define		bFrame_Weight_Short      		0x7000
++#define		bSub_Tune                			0xe00000
++#define		bFrame_DC_Length         		0xe000000
++#define		bSBD_start_offset        		0x30000000
++#define		bFrame_TH_2              		0x7
++#define		bFrame_GI2_TH            		0x38
++#define		bGI2_Sync_en             		0x40
++#define		bSarch_Short_Early       		0x300
++#define		bSarch_Short_Late        		0xc00
++#define		bSarch_GI2_Late          		0x70000
++#define		bCFOAntSum               		0x1
++#define		bCFOAcc                  			0x2
++#define		bCFOStartOffset          		0xc
++#define		bCFOLookBack             		0x70
++#define		bCFOSumWeight            		0x80
++#define		bDAGCEnable              			0x10000
++#define		bTXIQImb_A               			0x3ff
++#define		bTXIQImb_B               			0xfc00
++#define		bTXIQImb_C               			0x3f0000
++#define		bTXIQImb_D               			0xffc00000
++#define		bTxIDCOffset             			0xff
++#define		bTxQDCOffset             			0xff00
++#define		bTxDFIRMode              		0x10000
++#define		bTxPesudoNoiseOn         		0x4000000
++#define		bTxPesudoNoise_A         		0xff
++#define		bTxPesudoNoise_B         		0xff00
++#define		bTxPesudoNoise_C         		0xff0000
++#define		bTxPesudoNoise_D         		0xff000000
++#define		bCCADropOption           		0x20000
++#define		bCCADropThres            		0xfff00000
++#define		bEDCCA_H                 			0xf
++#define		bEDCCA_L                 			0xf0
++#define		bLambda_ED               0x300
++#define		bRxInitialGain           0x7f
++#define		bRxAntDivEn              0x80
++#define		bRxAGCAddressForLNA      0x7f00
++#define		bRxHighPowerFlow         0x8000
++#define		bRxAGCFreezeThres        0xc0000
++#define		bRxFreezeStep_AGC1       0x300000
++#define		bRxFreezeStep_AGC2       0xc00000
++#define		bRxFreezeStep_AGC3       0x3000000
++#define		bRxFreezeStep_AGC0       0xc000000
++#define		bRxRssi_Cmp_En           0x10000000
++#define		bRxQuickAGCEn            0x20000000
++#define		bRxAGCFreezeThresMode    0x40000000
++#define		bRxOverFlowCheckType     0x80000000
++#define		bRxAGCShift              0x7f
++#define		bTRSW_Tri_Only           0x80
++#define		bPowerThres              0x300
++#define		bRxAGCEn                 0x1
++#define		bRxAGCTogetherEn         0x2
++#define		bRxAGCMin                0x4
++#define		bRxHP_Ini                0x7
++#define		bRxHP_TRLNA              0x70
++#define		bRxHP_RSSI               0x700
++#define		bRxHP_BBP1               0x7000
++#define		bRxHP_BBP2               0x70000
++#define		bRxHP_BBP3               0x700000
++#define		bRSSI_H                  0x7f0000     //the threshold for high power
++#define		bRSSI_Gen                0x7f000000   //the threshold for ant diversity
++#define		bRxSettle_TRSW           0x7
++#define		bRxSettle_LNA            0x38
++#define		bRxSettle_RSSI           0x1c0
++#define		bRxSettle_BBP            0xe00
++#define		bRxSettle_RxHP           0x7000
++#define		bRxSettle_AntSW_RSSI     0x38000
++#define		bRxSettle_AntSW          0xc0000
++#define		bRxProcessTime_DAGC      0x300000
++#define		bRxSettle_HSSI           0x400000
++#define		bRxProcessTime_BBPPW     0x800000
++#define		bRxAntennaPowerShift     0x3000000
++#define		bRSSITableSelect         0xc000000
++#define		bRxHP_Final              0x7000000
++#define		bRxHTSettle_BBP          0x7
++#define		bRxHTSettle_HSSI         0x8
++#define		bRxHTSettle_RxHP         0x70
++#define		bRxHTSettle_BBPPW        0x80
++#define		bRxHTSettle_Idle         0x300
++#define		bRxHTSettle_Reserved     0x1c00
++#define		bRxHTRxHPEn              0x8000
++#define		bRxHTAGCFreezeThres      0x30000
++#define		bRxHTAGCTogetherEn       0x40000
++#define		bRxHTAGCMin              0x80000
++#define		bRxHTAGCEn               0x100000
++#define		bRxHTDAGCEn              0x200000
++#define		bRxHTRxHP_BBP            0x1c00000
++#define		bRxHTRxHP_Final          0xe0000000
++#define		bRxPWRatioTH             0x3
++#define		bRxPWRatioEn             0x4
++#define		bRxMFHold                0x3800
++#define		bRxPD_Delay_TH1          0x38
++#define		bRxPD_Delay_TH2          0x1c0
++#define		bRxPD_DC_COUNT_MAX       0x600
++//#define bRxMF_Hold               0x3800
++#define		bRxPD_Delay_TH           0x8000
++#define		bRxProcess_Delay         0xf0000
++#define		bRxSearchrange_GI2_Early 0x700000
++#define		bRxFrame_Guard_Counter_L 0x3800000
++#define		bRxSGI_Guard_L           0xc000000
++#define		bRxSGI_Search_L          0x30000000
++#define		bRxSGI_TH                0xc0000000
++#define		bDFSCnt0                 0xff
++#define		bDFSCnt1                 0xff00
++#define		bDFSFlag                 0xf0000       		
++#define		bMFWeightSum             0x300000
++#define		bMinIdxTH                0x7f000000       		
++#define		bDAFormat                0x40000       		
++#define		bTxChEmuEnable           0x01000000       		
++#define		bTRSWIsolation_A         0x7f
++#define		bTRSWIsolation_B         0x7f00
++#define		bTRSWIsolation_C         0x7f0000
++#define		bTRSWIsolation_D         0x7f000000       		
++#define		bExtLNAGain              0x7c00          
++
++// 6. PageE(0xE00)
++#define		bSTBCEn                  0x4	// Useless
++#define		bAntennaMapping          0x10
++#define		bNss                     0x20
++#define		bCFOAntSumD              0x200
++#define		bPHYCounterReset         0x8000000
++#define		bCFOReportGet            0x4000000
++#define		bOFDMContinueTx          0x10000000
++#define		bOFDMSingleCarrier       0x20000000
++#define		bOFDMSingleTone          0x40000000
++//#define bRxPath1                 0x01
++//#define bRxPath2                 0x02
++//#define bRxPath3                 0x04
++//#define bRxPath4                 0x08
++//#define bTxPath1                 0x10
++//#define bTxPath2                 0x20
++#define		bHTDetect                0x100
++#define		bCFOEn                   0x10000
++#define		bCFOValue                0xfff00000
++#define		bSigTone_Re              0x3f
++#define		bSigTone_Im              0x7f00
++#define		bCounter_CCA             0xffff
++#define		bCounter_ParityFail      0xffff0000
++#define		bCounter_RateIllegal     0xffff
++#define		bCounter_CRC8Fail        0xffff0000
++#define		bCounter_MCSNoSupport    0xffff
++#define		bCounter_FastSync        0xffff
++#define		bShortCFO                0xfff
++#define		bShortCFOTLength         12   //total
++#define		bShortCFOFLength         11   //fraction
++#define		bLongCFO                 0x7ff
++#define		bLongCFOTLength          11
++#define		bLongCFOFLength          11
++#define		bTailCFO                 0x1fff
++#define		bTailCFOTLength          13
++#define		bTailCFOFLength          12       		
++#define		bmax_en_pwdB             0xffff
++#define		bCC_power_dB             0xffff0000
++#define		bnoise_pwdB              0xffff
++#define		bPowerMeasTLength        10
++#define		bPowerMeasFLength        3
++#define		bRx_HT_BW                0x1
++#define		bRxSC                    0x6
++#define		bRx_HT                   0x8       		
++#define		bNB_intf_det_on          0x1
++#define		bIntf_win_len_cfg        0x30
++#define		bNB_Intf_TH_cfg          0x1c0       		
++#define		bRFGain                  0x3f
++#define		bTableSel                0x40
++#define		bTRSW                    0x80       		
++#define		bRxSNR_A                 0xff
++#define		bRxSNR_B                 0xff00
++#define		bRxSNR_C                 0xff0000
++#define		bRxSNR_D                 0xff000000
++#define		bSNREVMTLength           8
++#define		bSNREVMFLength           1       		
++#define		bCSI1st                  0xff
++#define		bCSI2nd                  0xff00
++#define		bRxEVM1st                0xff0000
++#define		bRxEVM2nd                0xff000000       		
++#define		bSIGEVM                  0xff
++#define		bPWDB                    0xff00
++#define		bSGIEN                   0x10000
++       		
++#define		bSFactorQAM1             0xf	// Useless
++#define		bSFactorQAM2             0xf0
++#define		bSFactorQAM3             0xf00
++#define		bSFactorQAM4             0xf000
++#define		bSFactorQAM5             0xf0000
++#define		bSFactorQAM6             0xf0000
++#define		bSFactorQAM7             0xf00000
++#define		bSFactorQAM8             0xf000000
++#define		bSFactorQAM9             0xf0000000
++#define		bCSIScheme               0x100000
++       		
++#define		bNoiseLvlTopSet          0x3	// Useless
++#define		bChSmooth                0x4
++#define		bChSmoothCfg1            0x38
++#define		bChSmoothCfg2            0x1c0
++#define		bChSmoothCfg3            0xe00
++#define		bChSmoothCfg4            0x7000
++#define		bMRCMode                 0x800000
++#define		bTHEVMCfg                0x7000000
++       		
++#define		bLoopFitType             0x1	// Useless
++#define		bUpdCFO                  0x40
++#define		bUpdCFOOffData           0x80
++#define		bAdvUpdCFO               0x100
++#define		bAdvTimeCtrl             0x800
++#define		bUpdClko                 0x1000
++#define		bFC                      0x6000
++#define		bTrackingMode            0x8000
++#define		bPhCmpEnable             0x10000
++#define		bUpdClkoLTF              0x20000
++#define		bComChCFO                0x40000
++#define		bCSIEstiMode             0x80000
++#define		bAdvUpdEqz               0x100000
++#define		bUChCfg                  0x7000000
++#define		bUpdEqz                  0x8000000
++
++#define		bTxAGCRate18_06			0x7f7f7f7f	// Useless
++#define		bTxAGCRate54_24			0x7f7f7f7f
++#define		bTxAGCRateMCS32			0x7f
++#define		bTxAGCRateCCK			0x7f00
++#define		bTxAGCRateMCS3_MCS0		0x7f7f7f7f
++#define		bTxAGCRateMCS7_MCS4		0x7f7f7f7f
++#define		bTxAGCRateMCS11_MCS8	0x7f7f7f7f
++#define		bTxAGCRateMCS15_MCS12	0x7f7f7f7f
++
++//Rx Pseduo noise
++#define		bRxPesudoNoiseOn         0x20000000	// Useless
++#define		bRxPesudoNoise_A         0xff
++#define		bRxPesudoNoise_B         0xff00
++#define		bRxPesudoNoise_C         0xff0000
++#define		bRxPesudoNoise_D         0xff000000
++#define		bPesudoNoiseState_A      0xffff
++#define		bPesudoNoiseState_B      0xffff0000
++#define		bPesudoNoiseState_C      0xffff
++#define		bPesudoNoiseState_D      0xffff0000
++
++//7. RF Register
++//Zebra1
++#define		bZebra1_HSSIEnable        0x8		// Useless
++#define		bZebra1_TRxControl        0xc00
++#define		bZebra1_TRxGainSetting    0x07f
++#define		bZebra1_RxCorner          0xc00
++#define		bZebra1_TxChargePump      0x38
++#define		bZebra1_RxChargePump      0x7
++#define		bZebra1_ChannelNum        0xf80
++#define		bZebra1_TxLPFBW           0x400
++#define		bZebra1_RxLPFBW           0x600
++
++//Zebra4
++#define		bRTL8256RegModeCtrl1      0x100	// Useless
++#define		bRTL8256RegModeCtrl0      0x40
++#define		bRTL8256_TxLPFBW          0x18
++#define		bRTL8256_RxLPFBW          0x600
++
++//RTL8258
++#define		bRTL8258_TxLPFBW          0xc	// Useless
++#define		bRTL8258_RxLPFBW          0xc00
++#define		bRTL8258_RSSILPFBW        0xc0
++
++
++//
++// Other Definition
++//
++
++//byte endable for sb_write
++#define		bByte0                    0x1	// Useless
++#define		bByte1                    0x2
++#define		bByte2                    0x4
++#define		bByte3                    0x8
++#define		bWord0                    0x3
++#define		bWord1                    0xc
++#define		bDWord                    0xf
++
++//for PutRegsetting & GetRegSetting BitMask
++#define		bMaskByte0		0xff	// Reg 0xc50 rOFDM0_XAAGCCore~0xC6f
++#define		bMaskByte1		0xff00
++#define		bMaskByte2		0xff0000
++#define		bMaskByte3		0xff000000
++#define		bMaskHWord		0xffff0000
++#define		bMaskLWord		0x0000ffff
++#define		bMaskDWord		0xffffffff
++#define		bMaskH4Bits		0xf0000000	
++#define 	bMaskOFDM_D		0xffc00000
++#define		bMaskCCK		0x3f3f3f3f
++#define		bMask12Bits		0xfff
++
++//for PutRFRegsetting & GetRFRegSetting BitMask
++#if (RTL92SE_FPGA_VERIFY == 1)
++//#define		bMask12Bits               0xfff	// RF Reg mask bits
++//#define		bMask20Bits               0xfff	// RF Reg mask bits T65 RF
++#define 		bRFRegOffsetMask	0xfff		
++#else
++//#define		bMask12Bits               0xfffff	// RF Reg mask bits
++//#define		bMask20Bits               0xfffff	// RF Reg mask bits T65 RF
++#define 		bRFRegOffsetMask	0xfffff		
++#endif       		
++#define		bEnable                   0x1	// Useless
++#define		bDisable                  0x0
++       		
++#define		LeftAntenna               0x0	// Useless
++#define		RightAntenna              0x1
++       		
++#define		tCheckTxStatus            500   //500ms // Useless
++#define		tUpdateRxCounter          100   //100ms
++       		
++#define		rateCCK     0	// Useless
++#define		rateOFDM    1
++#define		rateHT      2
++
++//define Register-End
++#define		bPMAC_End                 0x1ff	// Useless
++#define		bFPGAPHY0_End             0x8ff
++#define		bFPGAPHY1_End             0x9ff
++#define		bCCKPHY0_End              0xaff
++#define		bOFDMPHY0_End             0xcff
++#define		bOFDMPHY1_End             0xdff
++
++//define max debug item in each debug page
++//#define bMaxItem_FPGA_PHY0        0x9
++//#define bMaxItem_FPGA_PHY1        0x3
++//#define bMaxItem_PHY_11B          0x16
++//#define bMaxItem_OFDM_PHY0        0x29
++//#define bMaxItem_OFDM_PHY1        0x0
++
++#define		bPMACControl	0x0		// Useless
++#define		bWMACControl	0x1
++#define		bWNICControl	0x2
++
++#if 0
++#define		ANTENNA_A	0x1	// Useless
++#define		ANTENNA_B	0x2
++#define		ANTENNA_AB	0x3	// ANTENNA_A|ANTENNA_B
++
++#define		ANTENNA_C	0x4
++#define		ANTENNA_D	0x8
++#endif
++
++#define RCR_AAP			BIT(0)				// accept all physical address
++#define RCR_APM			BIT(1)				// accept physical match
++#define RCR_AM			BIT(2)				// accept multicast
++#define RCR_AB			BIT(3)				// accept broadcast
++#define RCR_ACRC32		BIT(5)				// accept error packet
++#define RCR_9356SEL		BIT(6)
++#define RCR_AICV		BIT(12)				// Accept ICV error packet
++#define RCR_RXFTH0		(BIT(13)|BIT(14)|BIT(15))	// Rx FIFO threshold
++#define RCR_ADF			BIT(18)				// Accept Data(frame type) frame
++#define RCR_ACF			BIT(19)				// Accept control frame
++#define RCR_AMF			BIT(20)				// Accept management frame
++#define RCR_ADD3		BIT(21)
++#define RCR_APWRMGT		BIT(22)				// Accept power management packet
++#define RCR_CBSSID		BIT(23)				// Accept BSSID match packet
++#define RCR_ENMARP		BIT(28)				// enable mac auto reset phy
++#define RCR_EnCS1		BIT(29)				// enable carrier sense method 1
++#define RCR_EnCS2		BIT(30)				// enable carrier sense method 2
++#define RCR_OnlyErlPkt		BIT(31)				// Rx Early mode is performed for packet size greater than 1536
++
++/*--------------------------Define Parameters-------------------------------*/
++
++
++#endif	//__INC_HAL8192SPHYREG_H
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_p2p.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_p2p.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_p2p.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_p2p.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,161 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __RTW_P2P_H_
++#define __RTW_P2P_H_
++
++#include <drv_types.h>
++
++u32 build_beacon_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pbuf);
++u32 build_probe_resp_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pbuf);
++u32 build_prov_disc_request_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pbuf, u8* pssid, u8 ussidlen, u8* pdev_raddr );
++u32 build_assoc_resp_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pbuf, u8 status_code);
++u32 build_deauth_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pbuf);
++#ifdef CONFIG_WFD
++u32 build_probe_req_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf);
++u32 build_probe_resp_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf, u8 tunneled);
++u32 build_beacon_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf);
++u32 build_nego_req_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf);
++u32 build_nego_resp_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf);
++u32 build_nego_confirm_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf);
++u32 build_invitation_req_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf);
++u32 build_invitation_resp_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf);
++u32 build_assoc_req_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf);
++u32 build_assoc_resp_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf);
++u32 build_provdisc_req_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf);
++u32 build_provdisc_resp_wfd_ie(struct wifidirect_info *pwdinfo, u8 *pbuf);
++#endif //CONFIG_WFD
++
++u32 process_probe_req_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pframe, uint len);
++u32 process_assoc_req_p2p_ie(struct wifidirect_info *pwdinfo, u8 *pframe, uint len, struct sta_info *psta);
++u32 process_p2p_devdisc_req(struct wifidirect_info *pwdinfo, u8 *pframe, uint len);
++u32 process_p2p_devdisc_resp(struct wifidirect_info *pwdinfo, u8 *pframe, uint len);
++u8 process_p2p_provdisc_req(struct wifidirect_info *pwdinfo,  u8 *pframe, uint len);
++u8 process_p2p_provdisc_resp(struct wifidirect_info *pwdinfo,  u8 *pframe);
++u8 process_p2p_group_negotation_req( struct wifidirect_info *pwdinfo, u8 *pframe, uint len );
++u8 process_p2p_group_negotation_resp( struct wifidirect_info *pwdinfo, u8 *pframe, uint len );
++u8 process_p2p_group_negotation_confirm( struct wifidirect_info *pwdinfo, u8 *pframe, uint len );
++u8 process_p2p_presence_req(struct wifidirect_info *pwdinfo, u8 *pframe, uint len);
++
++void p2p_protocol_wk_hdl(_adapter *padapter, int intCmdType);
++
++#ifdef CONFIG_P2P_PS
++void	process_p2p_ps_ie(PADAPTER padapter, u8 *IEs, u32 IELength);
++void	p2p_ps_wk_hdl(_adapter *padapter, u8 p2p_ps_state);
++u8	p2p_ps_wk_cmd(_adapter*padapter, u8 p2p_ps_state, u8 enqueue);
++#endif // CONFIG_P2P_PS
++
++#ifdef CONFIG_IOCTL_CFG80211
++void rtw_init_cfg80211_wifidirect_info( _adapter*	padapter);
++int rtw_p2p_check_frames(_adapter *padapter, const u8 *buf, u32 len, u8 tx);
++void rtw_append_wfd_ie(_adapter *padapter, u8 *buf, u32 *len);
++#endif //CONFIG_IOCTL_CFG80211
++
++void reset_global_wifidirect_info( _adapter* padapter );
++int rtw_init_wifi_display_info(_adapter* padapter);
++void rtw_init_wifidirect_timers(_adapter* padapter);
++void rtw_init_wifidirect_addrs(_adapter* padapter, u8 *dev_addr, u8 *iface_addr);
++void init_wifidirect_info( _adapter* padapter, enum P2P_ROLE role);
++int rtw_p2p_enable(_adapter *padapter, enum P2P_ROLE role);
++
++static inline void _rtw_p2p_set_state(struct wifidirect_info *wdinfo, enum P2P_STATE state)
++{
++	if(wdinfo->p2p_state != state) {
++		//wdinfo->pre_p2p_state = wdinfo->p2p_state;
++		wdinfo->p2p_state = state;
++	}
++}
++static inline void _rtw_p2p_set_pre_state(struct wifidirect_info *wdinfo, enum P2P_STATE state)
++{
++	if(wdinfo->pre_p2p_state != state) {
++		wdinfo->pre_p2p_state = state;
++	}
++}
++#if 0
++static inline void _rtw_p2p_restore_state(struct wifidirect_info *wdinfo)
++{
++	if(wdinfo->pre_p2p_state != -1) {
++		wdinfo->p2p_state = wdinfo->pre_p2p_state;
++		wdinfo->pre_p2p_state = -1;
++	}
++}
++#endif
++static inline void _rtw_p2p_set_role(struct wifidirect_info *wdinfo, enum P2P_ROLE role)
++{
++	if(wdinfo->role != role) {
++		wdinfo->role = role;
++	}
++}
++static inline int _rtw_p2p_state(struct wifidirect_info *wdinfo)
++{
++	return wdinfo->p2p_state;
++}
++static inline int _rtw_p2p_pre_state(struct wifidirect_info *wdinfo)
++{
++	return wdinfo->pre_p2p_state;
++}
++static inline int _rtw_p2p_role(struct wifidirect_info *wdinfo)
++{
++	return wdinfo->role;
++}
++static inline bool _rtw_p2p_chk_state(struct wifidirect_info *wdinfo, enum P2P_STATE state)
++{
++	return wdinfo->p2p_state == state;
++}
++static inline bool _rtw_p2p_chk_role(struct wifidirect_info *wdinfo, enum P2P_ROLE role)
++{
++	return wdinfo->role == role;
++}
++
++#ifdef CONFIG_DBG_P2P
++void dbg_rtw_p2p_set_state(struct wifidirect_info *wdinfo, enum P2P_STATE state, const char *caller, int line);
++void dbg_rtw_p2p_set_pre_state(struct wifidirect_info *wdinfo, enum P2P_STATE state, const char *caller, int line);
++//void dbg_rtw_p2p_restore_state(struct wifidirect_info *wdinfo, const char *caller, int line);
++void dbg_rtw_p2p_set_role(struct wifidirect_info *wdinfo, enum P2P_ROLE role, const char *caller, int line);
++#define rtw_p2p_set_state(wdinfo, state) dbg_rtw_p2p_set_state(wdinfo, state, __FUNCTION__, __LINE__)
++#define rtw_p2p_set_pre_state(wdinfo, state) dbg_rtw_p2p_set_pre_state(wdinfo, state, __FUNCTION__, __LINE__)
++#define rtw_p2p_set_role(wdinfo, role) dbg_rtw_p2p_set_role(wdinfo, role, __FUNCTION__, __LINE__)
++//#define rtw_p2p_restore_state(wdinfo) dbg_rtw_p2p_restore_state(wdinfo, __FUNCTION__, __LINE__)
++#else //CONFIG_DBG_P2P
++#define rtw_p2p_set_state(wdinfo, state) _rtw_p2p_set_state(wdinfo, state)
++#define rtw_p2p_set_pre_state(wdinfo, state) _rtw_p2p_set_pre_state(wdinfo, state)
++#define rtw_p2p_set_role(wdinfo, role) _rtw_p2p_set_role(wdinfo, role)
++//#define rtw_p2p_restore_state(wdinfo) _rtw_p2p_restore_state(wdinfo)
++#endif //CONFIG_DBG_P2P
++
++#define rtw_p2p_state(wdinfo) _rtw_p2p_state(wdinfo)
++#define rtw_p2p_pre_state(wdinfo) _rtw_p2p_pre_state(wdinfo)
++#define rtw_p2p_role(wdinfo) _rtw_p2p_role(wdinfo)
++#define rtw_p2p_chk_state(wdinfo, state) _rtw_p2p_chk_state(wdinfo, state)
++#define rtw_p2p_chk_role(wdinfo, role) _rtw_p2p_chk_role(wdinfo, role)
++
++#define rtw_p2p_findphase_ex_set(wdinfo, value) \
++	(wdinfo)->find_phase_state_exchange_cnt = (value)
++
++//is this find phase exchange for social channel scan?
++#define rtw_p2p_findphase_ex_is_social(wdinfo)   \
++	(wdinfo)->find_phase_state_exchange_cnt >= P2P_FINDPHASE_EX_SOCIAL_FIRST
++
++//should we need find phase exchange anymore?
++#define rtw_p2p_findphase_ex_is_needed(wdinfo) \
++	((wdinfo)->find_phase_state_exchange_cnt < P2P_FINDPHASE_EX_MAX && \
++	(wdinfo)->find_phase_state_exchange_cnt != P2P_FINDPHASE_EX_NONE)
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_pwrctrl.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_pwrctrl.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_pwrctrl.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_pwrctrl.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,362 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __RTW_PWRCTRL_H_
++#define __RTW_PWRCTRL_H_
++
++#include <drv_conf.h>
++#include <osdep_service.h>		
++#include <drv_types.h>
++
++#ifdef CONFIG_HAS_EARLYSUSPEND
++#include <linux/earlysuspend.h>
++#endif //CONFIG_HAS_EARLYSUSPEND
++
++
++#define FW_PWR0	0	
++#define FW_PWR1 	1
++#define FW_PWR2 	2
++#define FW_PWR3 	3
++
++
++#define HW_PWR0	7	
++#define HW_PWR1 	6
++#define HW_PWR2 	2
++#define HW_PWR3	0
++#define HW_PWR4	8
++
++#define FW_PWRMSK	0x7
++
++
++#define XMIT_ALIVE	BIT(0)
++#define RECV_ALIVE	BIT(1)
++#define CMD_ALIVE	BIT(2)
++#define EVT_ALIVE	BIT(3)
++
++
++enum Power_Mgnt
++{
++	PS_MODE_ACTIVE	= 0	,
++	PS_MODE_MIN			,
++	PS_MODE_MAX			,
++	PS_MODE_DTIM			,
++	PS_MODE_VOIP			,
++	PS_MODE_UAPSD_WMM	,
++	PS_MODE_UAPSD			,
++	PS_MODE_IBSS			,
++	PS_MODE_WWLAN		,
++	PM_Radio_Off			,
++	PM_Card_Disable		,
++	PS_MODE_NUM
++};
++
++
++/*
++	BIT[2:0] = HW state
++	BIT[3] = Protocol PS state,   0: register active state , 1: register sleep state
++	BIT[4] = sub-state
++*/
++
++#define PS_DPS				BIT(0)
++#define PS_LCLK				(PS_DPS)
++#define PS_RF_OFF			BIT(1)
++#define PS_ALL_ON			BIT(2)
++#define PS_ST_ACTIVE		BIT(3)
++
++#define PS_ISR_ENABLE		BIT(4)
++#define PS_IMR_ENABLE		BIT(5)
++#define PS_ACK				BIT(6)
++#define PS_TOGGLE			BIT(7)
++
++#define PS_STATE_MASK		(0x0F)
++#define PS_STATE_HW_MASK	(0x07)
++#define PS_SEQ_MASK			(0xc0)
++
++#define PS_STATE(x)		(PS_STATE_MASK & (x))
++#define PS_STATE_HW(x)	(PS_STATE_HW_MASK & (x))
++#define PS_SEQ(x)		(PS_SEQ_MASK & (x))
++
++#define PS_STATE_S0		(PS_DPS)
++#define PS_STATE_S1		(PS_LCLK)
++#define PS_STATE_S2		(PS_RF_OFF)
++#define PS_STATE_S3		(PS_ALL_ON)
++#define PS_STATE_S4		((PS_ST_ACTIVE) | (PS_ALL_ON))
++
++
++#define PS_IS_RF_ON(x)	((x) & (PS_ALL_ON))
++#define PS_IS_ACTIVE(x)	((x) & (PS_ST_ACTIVE))
++#define CLR_PS_STATE(x)	((x) = ((x) & (0xF0)))
++
++
++struct reportpwrstate_parm {
++	unsigned char mode;
++	unsigned char state; //the CPWM value
++	unsigned short rsvd;
++}; 
++
++
++typedef _sema _pwrlock;
++
++
++__inline static void _init_pwrlock(_pwrlock *plock)
++{
++	_rtw_init_sema(plock, 1);
++}
++
++__inline static void _free_pwrlock(_pwrlock *plock)
++{
++	_rtw_free_sema(plock);
++}
++
++
++__inline static void _enter_pwrlock(_pwrlock *plock)
++{
++	_rtw_down_sema(plock);
++}
++
++
++__inline static void _exit_pwrlock(_pwrlock *plock)
++{
++	_rtw_up_sema(plock);
++}
++
++#define LPS_DELAY_TIME	1*HZ // 1 sec
++
++#define EXE_PWR_NONE	0x01
++#define EXE_PWR_IPS		0x02
++#define EXE_PWR_LPS		0x04
++
++// RF state.
++typedef enum _rt_rf_power_state
++{
++	rf_on,		// RF is on after RFSleep or RFOff
++	rf_sleep,	// 802.11 Power Save mode
++	rf_off,		// HW/SW Radio OFF or Inactive Power Save
++	//=====Add the new RF state above this line=====//
++	rf_max
++}rt_rf_power_state;
++
++// RF Off Level for IPS or HW/SW radio off
++#define	RT_RF_OFF_LEVL_ASPM			BIT(0)	// PCI ASPM
++#define	RT_RF_OFF_LEVL_CLK_REQ		BIT(1)	// PCI clock request
++#define	RT_RF_OFF_LEVL_PCI_D3			BIT(2)	// PCI D3 mode
++#define	RT_RF_OFF_LEVL_HALT_NIC		BIT(3)	// NIC halt, re-initialize hw parameters
++#define	RT_RF_OFF_LEVL_FREE_FW		BIT(4)	// FW free, re-download the FW
++#define	RT_RF_OFF_LEVL_FW_32K		BIT(5)	// FW in 32k
++#define	RT_RF_PS_LEVEL_ALWAYS_ASPM	BIT(6)	// Always enable ASPM and Clock Req in initialization.
++#define	RT_RF_LPS_DISALBE_2R			BIT(30)	// When LPS is on, disable 2R if no packet is received or transmittd.
++#define	RT_RF_LPS_LEVEL_ASPM			BIT(31)	// LPS with ASPM
++
++#define	RT_IN_PS_LEVEL(ppsc, _PS_FLAG)		((ppsc->cur_ps_level & _PS_FLAG) ? _TRUE : _FALSE)
++#define	RT_CLEAR_PS_LEVEL(ppsc, _PS_FLAG)	(ppsc->cur_ps_level &= (~(_PS_FLAG)))
++#define	RT_SET_PS_LEVEL(ppsc, _PS_FLAG)		(ppsc->cur_ps_level |= _PS_FLAG)
++
++
++enum _PS_BBRegBackup_ {
++	PSBBREG_RF0 = 0,
++	PSBBREG_RF1,
++	PSBBREG_RF2,
++	PSBBREG_AFE0,
++	PSBBREG_TOTALCNT
++};
++
++enum { // for ips_mode
++	IPS_NONE=0,
++	IPS_NORMAL,
++	IPS_LEVEL_2,	
++};
++
++struct pwrctrl_priv
++{
++	_pwrlock	lock;
++	volatile u8 rpwm; // requested power state for fw
++	volatile u8 cpwm; // fw current power state. updated when 1. read from HCPWM 2. driver lowers power level
++	volatile u8 tog; // toggling
++	volatile u8 cpwm_tog; // toggling
++	u8	pwr_mode;
++	u8	smart_ps;
++	u32 alives;
++
++	u8	b_hw_radio_off;
++	u8	reg_rfoff;
++	u8	reg_pdnmode; //powerdown mode
++	u32	rfoff_reason;
++
++	//RF OFF Level
++	u32	cur_ps_level;
++	u32	reg_rfps_level;
++
++
++
++#ifdef CONFIG_PCI_HCI
++	//just for PCIE ASPM
++	u8	b_support_aspm; // If it supports ASPM, Offset[560h] = 0x40, otherwise Offset[560h] = 0x00. 
++	u8	b_support_backdoor;
++
++	//just for PCIE ASPM
++	u8	const_amdpci_aspm;
++#endif
++
++	uint 	ips_enter_cnts;
++	uint 	ips_leave_cnts;
++
++	u8	ips_mode; 
++	u8	ips_mode_req; // used to accept the mode setting request, will update to ipsmode later
++	uint bips_processing;
++	u32 ips_deny_time; /* will deny IPS when system time is smaller than this */
++	u8 ps_processing; /* temporarily used to mark whether in rtw_ps_processor */
++
++	u8	bLeisurePs;
++	u8	LpsIdleCount;
++	u8	power_mgnt;
++	u8	bFwCurrentInPSMode;
++	u32	DelayLPSLastTimeStamp;
++
++	s32		pnp_current_pwr_state;
++	u8		pnp_bstop_trx;
++
++
++	u8		bInternalAutoSuspend;
++	u8		bInSuspend;
++	u8		bSupportRemoteWakeup;	
++#ifdef CONFIG_WOWLAN
++	u8		wowlan_mode;
++	u8		wowlan_pattern;
++	u8		wowlan_magic;
++	u8		wowlan_unicast;
++	u8		wowlan_pattern_idx;
++	u32		wowlan_pattern_context[8][5];
++#endif // CONFIG_WOWLAN
++	_timer 	pwr_state_check_timer;
++	int		pwr_state_check_interval;
++	u8		pwr_state_check_cnts;
++
++	int 		ps_flag;
++	
++	rt_rf_power_state	rf_pwrstate;//cur power state
++	//rt_rf_power_state 	current_rfpwrstate;
++	rt_rf_power_state	change_rfpwrstate;
++
++	u8		bHWPowerdown;//if support hw power down
++	u8		bHWPwrPindetect;
++	u8		bkeepfwalive;		
++	u8		brfoffbyhw;
++	unsigned long PS_BBRegBackup[PSBBREG_TOTALCNT];
++	
++	#ifdef CONFIG_RESUME_IN_WORKQUEUE
++	struct workqueue_struct *rtw_workqueue;
++	_workitem resume_work;
++	#endif
++
++	#ifdef CONFIG_HAS_EARLYSUSPEND
++	struct early_suspend early_suspend;
++	u8 do_late_resume;
++	#endif //CONFIG_HAS_EARLYSUSPEND
++	
++	#ifdef CONFIG_ANDROID_POWER
++	android_early_suspend_t early_suspend;
++	u8 do_late_resume;
++	#endif
++	
++};
++
++#define rtw_get_ips_mode_req(pwrctrlpriv) \
++	(pwrctrlpriv)->ips_mode_req
++
++#define rtw_ips_mode_req(pwrctrlpriv, ips_mode) \
++	(pwrctrlpriv)->ips_mode_req = (ips_mode)
++
++#define RTW_PWR_STATE_CHK_INTERVAL 2000
++
++#define _rtw_set_pwr_state_check_timer(pwrctrlpriv, ms) \
++	do { \
++		/*DBG_871X("%s _rtw_set_pwr_state_check_timer(%p, %d)\n", __FUNCTION__, (pwrctrlpriv), (ms));*/ \
++		_set_timer(&(pwrctrlpriv)->pwr_state_check_timer, (ms)); \
++	} while(0)
++	
++#define rtw_set_pwr_state_check_timer(pwrctrlpriv) \
++	_rtw_set_pwr_state_check_timer((pwrctrlpriv), (pwrctrlpriv)->pwr_state_check_interval)
++
++extern void rtw_init_pwrctrl_priv(_adapter *adapter);
++extern void rtw_free_pwrctrl_priv(_adapter * adapter);
++
++#ifdef CONFIG_LPS_LCLK
++extern s32 rtw_register_tx_alive(PADAPTER padapter);
++extern void rtw_unregister_tx_alive(PADAPTER padapter);
++extern s32 rtw_register_rx_alive(PADAPTER padapter);
++extern void rtw_unregister_rx_alive(PADAPTER padapter);
++extern s32 rtw_register_cmd_alive(PADAPTER padapter);
++extern void rtw_unregister_cmd_alive(PADAPTER padapter);
++extern s32 rtw_register_evt_alive(PADAPTER padapter);
++extern void rtw_unregister_evt_alive(PADAPTER padapter);
++extern void cpwm_int_hdl(PADAPTER padapter, struct reportpwrstate_parm *preportpwrstate);
++#endif
++
++extern void rtw_set_ps_mode(_adapter * padapter, u8 ps_mode, u8 smart_ps);
++extern void rtw_set_rpwm(_adapter * padapter, u8 val8);
++extern void LeaveAllPowerSaveMode(PADAPTER Adapter);
++#ifdef CONFIG_IPS
++void _ips_enter(_adapter * padapter);
++void ips_enter(_adapter * padapter);
++int _ips_leave(_adapter * padapter);
++int ips_leave(_adapter * padapter);
++#endif
++
++void rtw_ps_processor(_adapter*padapter);
++
++#ifdef CONFIG_AUTOSUSPEND
++int autoresume_enter(_adapter* padapter);
++#endif
++#ifdef SUPPORT_HW_RFOFF_DETECTED
++rt_rf_power_state RfOnOffDetect(IN	PADAPTER pAdapter );
++#endif
++
++
++#ifdef CONFIG_LPS
++void LPS_Enter(PADAPTER padapter);
++void LPS_Leave(PADAPTER padapter);
++#endif
++
++#ifdef CONFIG_RESUME_IN_WORKQUEUE
++void rtw_resume_in_workqueue(struct pwrctrl_priv *pwrpriv);
++#endif //CONFIG_RESUME_IN_WORKQUEUE
++
++#if defined(CONFIG_HAS_EARLYSUSPEND ) || defined(CONFIG_ANDROID_POWER)
++bool rtw_is_earlysuspend_registered(struct pwrctrl_priv *pwrpriv);
++bool rtw_is_do_late_resume(struct pwrctrl_priv *pwrpriv);
++void rtw_set_do_late_resume(struct pwrctrl_priv *pwrpriv, bool enable);
++void rtw_register_early_suspend(struct pwrctrl_priv *pwrpriv);
++void rtw_unregister_early_suspend(struct pwrctrl_priv *pwrpriv);
++#else
++#define rtw_is_earlysuspend_registered(pwrpriv) _FALSE
++#define rtw_is_do_late_resume(pwrpriv) _FALSE
++#define rtw_set_do_late_resume(pwrpriv, enable) do {} while (0)
++#define rtw_register_early_suspend(pwrpriv) do {} while (0)
++#define rtw_unregister_early_suspend(pwrpriv) do {} while (0)
++#endif /* CONFIG_HAS_EARLYSUSPEND || CONFIG_ANDROID_POWER */
++
++u8 rtw_interface_ps_func(_adapter *padapter,HAL_INTF_PS_FUNC efunc_id,u8* val);
++void rtw_set_ips_deny(_adapter *padapter, u32 ms);
++int _rtw_pwr_wakeup(_adapter *padapter, u32 ips_deffer_ms, const char *caller);
++#define rtw_pwr_wakeup(adapter) _rtw_pwr_wakeup(adapter, RTW_PWR_STATE_CHK_INTERVAL, __FUNCTION__)
++#define rtw_pwr_wakeup_ex(adapter, ips_deffer_ms) _rtw_pwr_wakeup(adapter, ips_deffer_ms, __FUNCTION__)
++int rtw_pm_set_ips(_adapter *padapter, u8 mode);
++int rtw_pm_set_lps(_adapter *padapter, u8 mode);
++
++#endif  //__RTL871X_PWRCTRL_H_
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_qos.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_qos.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_qos.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_qos.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,40 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++
++
++#ifndef _RTW_QOS_H_
++#define _RTW_QOS_H_
++#include <drv_conf.h>
++#include <osdep_service.h>
++
++
++
++
++
++
++struct	qos_priv	{
++	
++	unsigned int	  qos_option;	//bit mask option: u-apsd, s-apsd, ts, block ack...		
++
++};
++
++
++#endif	//_RTL871X_QOS_H_
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_recv.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_recv.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_recv.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_recv.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,731 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef _RTW_RECV_H_
++#define _RTW_RECV_H_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++
++
++#define NR_RECVFRAME 256
++
++#define RXFRAME_ALIGN	8
++#define RXFRAME_ALIGN_SZ	(1<<RXFRAME_ALIGN)
++
++#define MAX_RXFRAME_CNT	512
++#define MAX_RX_NUMBLKS		(32)
++#define RECVFRAME_HDR_ALIGN 128
++
++#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
++
++static u8 SNAP_ETH_TYPE_IPX[2] = {0x81, 0x37};
++
++static u8 SNAP_ETH_TYPE_APPLETALK_AARP[2] = {0x80, 0xf3};
++static u8 SNAP_ETH_TYPE_APPLETALK_DDP[2] = {0x80, 0x9b};
++static u8 SNAP_ETH_TYPE_TDLS[2] = {0x89, 0x0d};
++static u8 SNAP_HDR_APPLETALK_DDP[3] = {0x08, 0x00, 0x07}; // Datagram Delivery Protocol
++
++static u8 oui_8021h[] = {0x00, 0x00, 0xf8};
++static u8 oui_rfc1042[]= {0x00,0x00,0x00};
++
++#define MAX_SUBFRAME_COUNT	64
++static u8 rtw_rfc1042_header[] =
++{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
++/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */
++static u8 rtw_bridge_tunnel_header[] =
++{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
++
++//for Rx reordering buffer control
++struct recv_reorder_ctrl
++{
++	_adapter	*padapter;
++	u8 enable;
++	u16 indicate_seq;//=wstart_b, init_value=0xffff
++	u16 wend_b;
++	u8 wsize_b;
++	_queue pending_recvframe_queue;
++	_timer reordering_ctrl_timer;
++};
++
++struct	stainfo_rxcache	{
++	u16 	tid_rxseq[16];
++/*
++	unsigned short 	tid0_rxseq;
++	unsigned short 	tid1_rxseq;
++	unsigned short 	tid2_rxseq;
++	unsigned short 	tid3_rxseq;
++	unsigned short 	tid4_rxseq;
++	unsigned short 	tid5_rxseq;
++	unsigned short 	tid6_rxseq;
++	unsigned short 	tid7_rxseq;
++	unsigned short 	tid8_rxseq;
++	unsigned short 	tid9_rxseq;
++	unsigned short 	tid10_rxseq;
++	unsigned short 	tid11_rxseq;
++	unsigned short 	tid12_rxseq;
++	unsigned short 	tid13_rxseq;
++	unsigned short 	tid14_rxseq;
++	unsigned short 	tid15_rxseq;
++*/
++};
++
++
++struct smooth_rssi_data {
++	u32	elements[100];	//array to store values
++	u32	index;			//index to current array to store
++	u32	total_num;		//num of valid elements
++	u32	total_val;		//sum of valid elements
++};
++
++struct signal_stat {
++	u8	update_req;		//used to indicate 
++	u8	avg_val;		//avg of valid elements
++	u32	total_num;		//num of valid elements
++	u32	total_val;		//sum of valid elements	
++};
++
++struct rx_pkt_attrib
++{
++	u16	pkt_len;
++	u8	physt;
++	u8	drvinfo_sz;
++	u8	shift_sz;
++	u8	hdrlen; //the WLAN Header Len
++	u8 	to_fr_ds;
++	u8 	amsdu;
++	u8	qos;
++	u8	priority;
++	u8	pw_save;
++	u8	mdata;
++	u16	seq_num;
++	u8	frag_num;
++	u8	mfrag;
++	u8	order;
++	u8	privacy; //in frame_ctrl field
++	u8	bdecrypted;
++	u8	encrypt; //when 0 indicate no encrypt. when non-zero, indicate the encrypt algorith
++	u8	iv_len;
++	u8	icv_len;
++	u8	crc_err;
++	u8	icv_err;
++
++	u16 eth_type;
++
++	u8 	dst[ETH_ALEN];
++	u8 	src[ETH_ALEN];
++	u8 	ta[ETH_ALEN];
++	u8 	ra[ETH_ALEN];
++	u8 	bssid[ETH_ALEN];
++	
++	u8 ack_policy;
++	
++//#ifdef CONFIG_TCP_CSUM_OFFLOAD_RX
++	u8	tcpchk_valid; // 0: invalid, 1: valid
++	u8	ip_chkrpt; //0: incorrect, 1: correct
++	u8	tcp_chkrpt; //0: incorrect, 1: correct
++//#endif
++	u8 	key_index;
++
++	u8	mcs_rate;
++	u8	rxht;
++	u8 	sgi;
++	u8	signal_qual;
++	s8	rx_mimo_signal_qual[2];
++	u8	signal_strength;
++	u8	rx_rssi[2];  //This value is percentage
++	u8	rx_snr[2];
++	u32	RxPWDBAll;
++	s32	RecvSignalPower;
++};
++
++
++//These definition is used for Rx packet reordering.
++#define SN_LESS(a, b)		(((a-b)&0x800)!=0)
++#define SN_EQUAL(a, b)	(a == b)
++//#define REORDER_WIN_SIZE	128
++//#define REORDER_ENTRY_NUM	128
++#define REORDER_WAIT_TIME	(50) // (ms)
++
++#define RECVBUFF_ALIGN_SZ 8
++
++#define RXDESC_SIZE	24
++#define RXDESC_OFFSET RXDESC_SIZE
++
++struct recv_stat
++{
++	unsigned int rxdw0;
++
++	unsigned int rxdw1;
++
++	unsigned int rxdw2;
++
++	unsigned int rxdw3;
++
++	unsigned int rxdw4;
++
++	unsigned int rxdw5;
++
++#ifdef CONFIG_PCI_HCI
++	unsigned int rxdw6;
++
++	unsigned int rxdw7;
++#endif
++};
++
++#define EOR BIT(30)
++
++#ifdef CONFIG_PCI_HCI
++#define PCI_MAX_RX_QUEUE		1// MSDU packet queue, Rx Command Queue
++#define PCI_MAX_RX_COUNT		128
++
++struct rtw_rx_ring {
++	struct recv_stat	*desc;
++	dma_addr_t		dma;
++	unsigned int		idx;
++	struct sk_buff	*rx_buf[PCI_MAX_RX_COUNT];
++};
++#endif
++
++/*
++accesser of recv_priv: rtw_recv_entry(dispatch / passive level); recv_thread(passive) ; returnpkt(dispatch)
++; halt(passive) ;
++
++using enter_critical section to protect
++*/
++struct recv_priv
++{
++  	  _lock	lock;
++
++#ifdef CONFIG_RECV_THREAD_MODE
++	_sema	recv_sema;
++	_sema	terminate_recvthread_sema;
++#endif
++
++	//_queue	blk_strms[MAX_RX_NUMBLKS];    // keeping the block ack frame until return ack
++	_queue	free_recv_queue;
++	_queue	recv_pending_queue;
++	_queue	uc_swdec_pending_queue;
++
++
++	u8 *pallocated_frame_buf;
++	u8 *precv_frame_buf;
++
++	uint free_recvframe_cnt;
++
++	_adapter	*adapter;
++
++#ifdef PLATFORM_WINDOWS
++	_nic_hdl  RxPktPoolHdl;
++	_nic_hdl  RxBufPoolHdl;
++
++#ifdef PLATFORM_OS_XP
++	PMDL	pbytecnt_mdl;
++#endif
++	uint	counter; //record the number that up-layer will return to drv; only when counter==0 can we  release recv_priv
++	NDIS_EVENT 	recv_resource_evt ;
++#endif
++
++	u32	bIsAnyNonBEPkts;
++	u64	rx_bytes;
++	u64	rx_pkts;
++	u64	rx_drop;
++	u64	last_rx_bytes;
++
++	uint  rx_icv_err;
++	uint  rx_largepacket_crcerr;
++	uint  rx_smallpacket_crcerr;
++	uint  rx_middlepacket_crcerr;
++
++#ifdef CONFIG_USB_HCI
++	//u8 *pallocated_urb_buf;
++	_sema allrxreturnevt;
++	uint	ff_hwaddr;
++	u8	rx_pending_cnt;
++
++#ifdef CONFIG_USB_INTERRUPT_IN_PIPE
++#ifdef PLATFORM_LINUX
++	PURB	int_in_urb;
++#endif
++
++	u8	*int_in_buf;
++#endif
++
++#endif
++#if defined(PLATFORM_LINUX) || defined(PLATFORM_FREEBSD)
++#ifdef PLATFORM_FREEBSD
++	struct task irq_prepare_beacon_tasklet;
++	struct task recv_tasklet;
++#else //PLATFORM_FREEBSD
++	struct tasklet_struct irq_prepare_beacon_tasklet;
++	struct tasklet_struct recv_tasklet;
++#endif //PLATFORM_FREEBSD
++	struct sk_buff_head free_recv_skb_queue;
++	struct sk_buff_head rx_skb_queue;
++#ifdef CONFIG_RX_INDICATE_QUEUE
++	struct task rx_indicate_tasklet;
++	struct ifqueue rx_indicate_queue;
++#endif	// CONFIG_RX_INDICATE_QUEUE
++
++#ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX
++	_queue	recv_buf_pending_queue;
++#endif	// CONFIG_USE_USB_BUFFER_ALLOC_RX
++#endif //defined(PLATFORM_LINUX) || defined(PLATFORM_FREEBSD)
++
++	u8 *pallocated_recv_buf;
++	u8 *precv_buf;    // 4 alignment
++	_queue	free_recv_buf_queue;
++	u32	free_recv_buf_queue_cnt;
++
++#ifdef CONFIG_SDIO_HCI
++	_queue	recv_buf_pending_queue;
++#endif
++
++#ifdef CONFIG_PCI_HCI
++	// Rx
++	struct rtw_rx_ring	rx_ring[PCI_MAX_RX_QUEUE];
++	int 	rxringcount;
++	u16	rxbuffersize;
++#endif
++
++	//For display the phy informatiom
++	u8 is_signal_dbg;	// for debug
++	u8 signal_strength_dbg;	// for debug
++	s8 rssi;
++	s8 rxpwdb;
++	u8 signal_strength;
++	u8 signal_qual;
++	u8 noise;
++	int RxSNRdB[2];
++	s8 RxRssi[2];
++	int FalseAlmCnt_all;
++
++#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS
++	_timer signal_stat_timer;
++	u32 signal_stat_sampling_interval;
++	//u32 signal_stat_converging_constant;
++	struct signal_stat signal_qual_data;
++	struct signal_stat signal_strength_data;
++#else //CONFIG_NEW_SIGNAL_STAT_PROCESS
++	struct smooth_rssi_data signal_qual_data;
++	struct smooth_rssi_data signal_strength_data;
++#endif //CONFIG_NEW_SIGNAL_STAT_PROCESS
++
++	u32 recvbuf_skb_alloc_fail_cnt;
++	u32 recvbuf_null_cnt;
++	u32 read_port_complete_EINPROGRESS_cnt;
++	u32 read_port_complete_other_urb_err_cnt;
++	
++
++};
++
++#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS
++#define rtw_set_signal_stat_timer(recvpriv) _set_timer(&(recvpriv)->signal_stat_timer, (recvpriv)->signal_stat_sampling_interval)
++#endif //CONFIG_NEW_SIGNAL_STAT_PROCESS
++
++struct sta_recv_priv {
++
++	_lock	lock;
++	sint	option;
++
++	//_queue	blk_strms[MAX_RX_NUMBLKS];
++	_queue defrag_q;	 //keeping the fragment frame until defrag
++
++	struct	stainfo_rxcache rxcache;
++
++	//uint	sta_rx_bytes;
++	//uint	sta_rx_pkts;
++	//uint	sta_rx_fail;
++
++};
++
++
++struct recv_buf
++{
++	_list list;
++
++	_lock recvbuf_lock;
++
++	u32	ref_cnt;
++
++	PADAPTER adapter;
++
++	u8	*pbuf;
++	u8	*pallocated_buf;
++
++	u32	len;
++	u8	*phead;
++	u8	*pdata;
++	u8	*ptail;
++	u8	*pend;
++
++#ifdef CONFIG_USB_HCI
++
++	#if defined(PLATFORM_OS_XP)||defined(PLATFORM_LINUX)||defined(PLATFORM_FREEBSD)
++	PURB	purb;
++	dma_addr_t dma_transfer_addr;	/* (in) dma addr for transfer_buffer */
++	u32 alloc_sz;
++	#endif
++
++	#ifdef PLATFORM_OS_XP
++	PIRP		pirp;
++	#endif
++
++	#ifdef PLATFORM_OS_CE
++	USB_TRANSFER	usb_transfer_read_port;
++	#endif
++
++	u8  irp_pending;
++	int  transfer_len;
++
++#endif
++
++#ifdef PLATFORM_LINUX
++	_pkt *pskb;
++	u8	reuse;
++#endif
++#ifdef PLATFORM_FREEBSD //skb solution
++	struct sk_buff *pskb;
++	u8	reuse;
++#endif //PLATFORM_FREEBSD //skb solution
++};
++
++
++/*
++	head  ----->
++
++		data  ----->
++
++			payload
++
++		tail  ----->
++
++
++	end   ----->
++
++	len = (unsigned int )(tail - data);
++
++*/
++struct recv_frame_hdr
++{
++	_list	list;
++#ifndef CONFIG_BSD_RX_USE_MBUF
++	struct sk_buff	 *pkt;
++	struct sk_buff	 *pkt_newalloc;
++#else // CONFIG_BSD_RX_USE_MBUF
++	_pkt	*pkt;
++	_pkt *pkt_newalloc;
++#endif // CONFIG_BSD_RX_USE_MBUF
++
++	_adapter  *adapter;
++
++	u8 fragcnt;
++
++	int frame_tag;
++
++	struct rx_pkt_attrib attrib;
++
++	uint  len;
++	u8 *rx_head;
++	u8 *rx_data;
++	u8 *rx_tail;
++	u8 *rx_end;
++
++	void *precvbuf;
++
++
++	//
++	struct sta_info *psta;
++
++	//for A-MPDU Rx reordering buffer control
++	struct recv_reorder_ctrl *preorder_ctrl;
++
++};
++
++
++union recv_frame{
++
++	union{
++		_list list;
++		struct recv_frame_hdr hdr;
++		uint mem[RECVFRAME_HDR_ALIGN>>2];
++	}u;
++
++	//uint mem[MAX_RXSZ>>2];
++
++};
++
++
++extern union recv_frame *_rtw_alloc_recvframe (_queue *pfree_recv_queue);  //get a free recv_frame from pfree_recv_queue
++extern union recv_frame *rtw_alloc_recvframe (_queue *pfree_recv_queue);  //get a free recv_frame from pfree_recv_queue
++extern void rtw_init_recvframe(union recv_frame *precvframe ,struct recv_priv *precvpriv);
++extern int	 rtw_free_recvframe(union recv_frame *precvframe, _queue *pfree_recv_queue);
++
++#define rtw_dequeue_recvframe(queue) rtw_alloc_recvframe(queue)
++extern int _rtw_enqueue_recvframe(union recv_frame *precvframe, _queue *queue);
++extern int rtw_enqueue_recvframe(union recv_frame *precvframe, _queue *queue);
++
++extern void rtw_free_recvframe_queue(_queue *pframequeue,  _queue *pfree_recv_queue);
++u32 rtw_free_uc_swdec_pending_queue(_adapter *adapter);
++
++sint rtw_enqueue_recvbuf_to_head(struct recv_buf *precvbuf, _queue *queue);
++sint rtw_enqueue_recvbuf(struct recv_buf *precvbuf, _queue *queue);
++struct recv_buf *rtw_dequeue_recvbuf (_queue *queue);
++
++void rtw_reordering_ctrl_timeout_handler(void *pcontext);
++
++__inline static u8 *get_rxmem(union recv_frame *precvframe)
++{
++	//always return rx_head...
++	if(precvframe==NULL)
++		return NULL;
++
++	return precvframe->u.hdr.rx_head;
++}
++
++__inline static u8 *get_rx_status(union recv_frame *precvframe)
++{
++
++	return get_rxmem(precvframe);
++
++}
++
++__inline static u8 *get_recvframe_data(union recv_frame *precvframe)
++{
++
++	//alwasy return rx_data
++	if(precvframe==NULL)
++		return NULL;
++
++	return precvframe->u.hdr.rx_data;
++
++}
++
++__inline static u8 *recvframe_push(union recv_frame *precvframe, sint sz)
++{
++	// append data before rx_data
++
++	/* add data to the start of recv_frame
++ *
++ *      This function extends the used data area of the recv_frame at the buffer
++ *      start. rx_data must be still larger than rx_head, after pushing.
++ */
++
++	if(precvframe==NULL)
++		return NULL;
++
++
++	precvframe->u.hdr.rx_data -= sz ;
++	if( precvframe->u.hdr.rx_data < precvframe->u.hdr.rx_head )
++	{
++		precvframe->u.hdr.rx_data += sz ;
++		return NULL;
++	}
++
++	precvframe->u.hdr.len +=sz;
++
++	return precvframe->u.hdr.rx_data;
++
++}
++
++
++__inline static u8 *recvframe_pull(union recv_frame *precvframe, sint sz)
++{
++	// rx_data += sz; move rx_data sz bytes  hereafter
++
++	//used for extract sz bytes from rx_data, update rx_data and return the updated rx_data to the caller
++
++
++	if(precvframe==NULL)
++		return NULL;
++
++
++	precvframe->u.hdr.rx_data += sz;
++
++	if(precvframe->u.hdr.rx_data > precvframe->u.hdr.rx_tail)
++	{
++		precvframe->u.hdr.rx_data -= sz;
++		return NULL;
++	}
++
++	precvframe->u.hdr.len -=sz;
++
++	return precvframe->u.hdr.rx_data;
++
++}
++
++__inline static u8 *recvframe_put(union recv_frame *precvframe, sint sz)
++{
++	// rx_tai += sz; move rx_tail sz bytes  hereafter
++
++	//used for append sz bytes from ptr to rx_tail, update rx_tail and return the updated rx_tail to the caller
++	//after putting, rx_tail must be still larger than rx_end.
++ 	unsigned char * prev_rx_tail;
++
++	if(precvframe==NULL)
++		return NULL;
++
++	prev_rx_tail = precvframe->u.hdr.rx_tail;
++
++	precvframe->u.hdr.rx_tail += sz;
++
++	if(precvframe->u.hdr.rx_tail > precvframe->u.hdr.rx_end)
++	{
++		precvframe->u.hdr.rx_tail -= sz;
++		return NULL;
++	}
++
++	precvframe->u.hdr.len +=sz;
++
++	return precvframe->u.hdr.rx_tail;
++
++}
++
++
++
++__inline static u8 *recvframe_pull_tail(union recv_frame *precvframe, sint sz)
++{
++	// rmv data from rx_tail (by yitsen)
++
++	//used for extract sz bytes from rx_end, update rx_end and return the updated rx_end to the caller
++	//after pulling, rx_end must be still larger than rx_data.
++
++	if(precvframe==NULL)
++		return NULL;
++
++	precvframe->u.hdr.rx_tail -= sz;
++
++	if(precvframe->u.hdr.rx_tail < precvframe->u.hdr.rx_data)
++	{
++		precvframe->u.hdr.rx_tail += sz;
++		return NULL;
++	}
++
++	precvframe->u.hdr.len -=sz;
++
++	return precvframe->u.hdr.rx_tail;
++
++}
++
++
++
++__inline static _buffer * get_rxbuf_desc(union recv_frame *precvframe)
++{
++	_buffer * buf_desc;
++
++	if(precvframe==NULL)
++		return NULL;
++#ifdef PLATFORM_WINDOWS
++	NdisQueryPacket(precvframe->u.hdr.pkt, NULL, NULL, &buf_desc, NULL);
++#endif
++
++	return buf_desc;
++}
++
++
++__inline static union recv_frame *rxmem_to_recvframe(u8 *rxmem)
++{
++	//due to the design of 2048 bytes alignment of recv_frame, we can reference the union recv_frame
++	//from any given member of recv_frame.
++	// rxmem indicates the any member/address in recv_frame
++
++	return (union recv_frame*)(((SIZE_PTR)rxmem >> RXFRAME_ALIGN) << RXFRAME_ALIGN);
++
++}
++
++__inline static union recv_frame *pkt_to_recvframe(_pkt *pkt)
++{
++
++	u8 * buf_star;
++	union recv_frame * precv_frame;
++#ifdef PLATFORM_WINDOWS
++	_buffer * buf_desc;
++	uint len;
++
++	NdisQueryPacket(pkt, NULL, NULL, &buf_desc, &len);
++	NdisQueryBufferSafe(buf_desc, &buf_star, &len, HighPagePriority);
++#endif
++	precv_frame = rxmem_to_recvframe((unsigned char*)buf_star);
++
++	return precv_frame;
++}
++
++__inline static u8 *pkt_to_recvmem(_pkt *pkt)
++{
++	// return the rx_head
++
++	union recv_frame * precv_frame = pkt_to_recvframe(pkt);
++
++	return 	precv_frame->u.hdr.rx_head;
++
++}
++
++__inline static u8 *pkt_to_recvdata(_pkt *pkt)
++{
++	// return the rx_data
++
++	union recv_frame * precv_frame =pkt_to_recvframe(pkt);
++
++	return 	precv_frame->u.hdr.rx_data;
++
++}
++
++
++__inline static sint get_recvframe_len(union recv_frame *precvframe)
++{
++	return precvframe->u.hdr.len;
++}
++
++__inline static u8 query_rx_pwr_percentage(s8 antpower )
++{
++	if ((antpower <= -100) || (antpower >= 20))
++	{
++		return	0;
++	}
++	else if (antpower >= 0)
++	{
++		return	100;
++	}
++	else
++	{
++		return	(100+antpower);
++	}
++}
++
++__inline static s32 translate_percentage_to_dbm(u32 SignalStrengthIndex)
++{
++	s32	SignalPower; // in dBm.
++
++	// Translate to dBm (x=0.5y-95).
++	SignalPower = (s32)((SignalStrengthIndex + 1) >> 1);
++	SignalPower -= 95;
++
++	return SignalPower;
++}
++
++
++struct sta_info;
++
++extern void _rtw_init_sta_recv_priv(struct sta_recv_priv *psta_recvpriv);
++
++extern void  mgt_dispatcher(_adapter *padapter, union recv_frame *precv_frame);
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_rf.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_rf.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_rf.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_rf.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,152 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef	__RTW_RF_H_ 
++#define __RTW_RF_H_
++
++#include <drv_conf.h>
++#include <rtw_cmd.h>
++
++#define OFDM_PHY		1
++#define MIXED_PHY		2
++#define CCK_PHY		3
++
++#define NumRates	(13)
++
++// slot time for 11g
++#define SHORT_SLOT_TIME					9
++#define NON_SHORT_SLOT_TIME				20
++
++#define RTL8711_RF_MAX_SENS 6
++#define RTL8711_RF_DEF_SENS 4
++
++//
++// We now define the following channels as the max channels in each channel plan.
++// 2G, total 14 chnls
++// {1,2,3,4,5,6,7,8,9,10,11,12,13,14}
++// 5G, total 24 chnls
++// {36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,149,153,157,161,165}
++#define	MAX_CHANNEL_NUM_2G				14
++#define	MAX_CHANNEL_NUM_5G				24
++#define	MAX_CHANNEL_NUM					38//14+24
++
++//#define NUM_REGULATORYS	21
++#define NUM_REGULATORYS	1
++
++//Country codes
++#define USA							0x555320
++#define EUROPE						0x1 //temp, should be provided later	
++#define JAPAN						0x2 //temp, should be provided later	
++
++struct	regulatory_class {
++	u32	starting_freq;					//MHz, 
++	u8	channel_set[MAX_CHANNEL_NUM];
++	u8	channel_cck_power[MAX_CHANNEL_NUM];//dbm
++	u8	channel_ofdm_power[MAX_CHANNEL_NUM];//dbm
++	u8	txpower_limit;  				//dbm
++	u8	channel_spacing;				//MHz
++	u8	modem;
++};
++
++typedef enum _CAPABILITY{
++	cESS			= 0x0001,
++	cIBSS			= 0x0002,
++	cPollable		= 0x0004,
++	cPollReq			= 0x0008,
++	cPrivacy		= 0x0010,
++	cShortPreamble	= 0x0020,
++	cPBCC			= 0x0040,
++	cChannelAgility	= 0x0080,
++	cSpectrumMgnt	= 0x0100,
++	cQos			= 0x0200,	// For HCCA, use with CF-Pollable and CF-PollReq
++	cShortSlotTime	= 0x0400,
++	cAPSD			= 0x0800,
++	cRM				= 0x1000,	// RRM (Radio Request Measurement)
++	cDSSS_OFDM	= 0x2000,
++	cDelayedBA		= 0x4000,
++	cImmediateBA	= 0x8000,
++}CAPABILITY, *PCAPABILITY;
++
++enum	_REG_PREAMBLE_MODE{
++	PREAMBLE_LONG	= 1,
++	PREAMBLE_AUTO	= 2,
++	PREAMBLE_SHORT	= 3,
++};
++
++
++enum _RTL8712_RF_MIMO_CONFIG_{
++ RTL8712_RFCONFIG_1T=0x10,
++ RTL8712_RFCONFIG_2T=0x20,
++ RTL8712_RFCONFIG_1R=0x01,
++ RTL8712_RFCONFIG_2R=0x02,
++ RTL8712_RFCONFIG_1T1R=0x11,
++ RTL8712_RFCONFIG_1T2R=0x12,
++ RTL8712_RFCONFIG_TURBO=0x92,
++ RTL8712_RFCONFIG_2T2R=0x22
++};
++
++
++// Bandwidth Offset
++#define HAL_PRIME_CHNL_OFFSET_DONT_CARE	0
++#define HAL_PRIME_CHNL_OFFSET_LOWER	1
++#define HAL_PRIME_CHNL_OFFSET_UPPER	2
++
++// Represent Channel Width in HT Capabilities
++//
++typedef enum _HT_CHANNEL_WIDTH {
++	HT_CHANNEL_WIDTH_20 = 0,
++	HT_CHANNEL_WIDTH_40 = 1,
++}HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH;
++
++//
++// Represent Extention Channel Offset in HT Capabilities
++// This is available only in 40Mhz mode.
++//
++typedef enum _HT_EXTCHNL_OFFSET{
++	HT_EXTCHNL_OFFSET_NO_EXT = 0,
++	HT_EXTCHNL_OFFSET_UPPER = 1,
++	HT_EXTCHNL_OFFSET_NO_DEF = 2,
++	HT_EXTCHNL_OFFSET_LOWER = 3,
++}HT_EXTCHNL_OFFSET, *PHT_EXTCHNL_OFFSET;
++
++/* 2007/11/15 MH Define different RF type. */
++typedef	enum _RT_RF_TYPE_DEFINITION
++{
++	RF_1T2R = 0,
++	RF_2T4R = 1,
++	RF_2T2R = 2,
++	RF_1T1R = 3,
++	RF_2T2R_GREEN = 4,
++	RF_819X_MAX_TYPE = 5,
++}RT_RF_TYPE_DEF_E;
++
++typedef enum _RF_RADIO_PATH{
++	RF_PATH_A = 0,			//Radio Path A
++	RF_PATH_B = 1,			//Radio Path B
++	RF_PATH_C = 2,			//Radio Path C
++	RF_PATH_D = 3,			//Radio Path D
++	//RF_PATH_MAX				//Max RF number 90 support 
++}RF_RADIO_PATH_E, *PRF_RADIO_PATH_E;
++
++u32 rtw_ch2freq(u32 ch);
++u32 rtw_freq2ch(u32 freq);
++
++
++#endif //_RTL8711_RF_H_
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_security.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_security.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_security.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_security.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,447 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __RTW_SECURITY_H_
++#define __RTW_SECURITY_H_
++
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++
++
++#define _NO_PRIVACY_	0x0
++#define _WEP40_			0x1
++#define _TKIP_			0x2
++#define _TKIP_WTMIC_	0x3
++#define _AES_			0x4
++#define _WEP104_		0x5
++#ifdef CONFIG_IEEE80211W
++#define _BIP_				0x8 
++#endif //CONFIG_IEEE80211W
++#define is_wep_enc(alg) (((alg) == _WEP40_) || ((alg) == _WEP104_))
++
++#define _WPA_IE_ID_	0xdd
++#define _WPA2_IE_ID_	0x30
++
++#define SHA256_MAC_LEN 32
++#define AES_BLOCK_SIZE 16
++#define AES_PRIV_SIZE (4 * 44)
++
++#ifndef Ndis802_11AuthModeWPA2
++#define Ndis802_11AuthModeWPA2 (Ndis802_11AuthModeWPANone + 1)
++#endif
++
++#ifndef Ndis802_11AuthModeWPA2PSK
++#define Ndis802_11AuthModeWPA2PSK (Ndis802_11AuthModeWPANone + 2)
++#endif
++
++union pn48	{
++	
++	u64	val;
++	
++#ifdef CONFIG_LITTLE_ENDIAN
++
++struct {
++  u8 TSC0;
++  u8 TSC1;
++  u8 TSC2;
++  u8 TSC3;
++  u8 TSC4;
++  u8 TSC5;
++  u8 TSC6;
++  u8 TSC7;
++} _byte_;
++ 
++#elif defined(CONFIG_BIG_ENDIAN)
++
++struct {
++  u8 TSC7;
++  u8 TSC6;
++  u8 TSC5;
++  u8 TSC4;
++  u8 TSC3;
++  u8 TSC2;
++  u8 TSC1;
++  u8 TSC0;
++} _byte_;
++ 
++#endif
++
++};
++
++union Keytype {
++        u8   skey[16];
++        u32    lkey[4];
++};
++
++
++typedef struct _RT_PMKID_LIST
++{
++	u8						bUsed;
++	u8 						Bssid[6];
++	u8						PMKID[16];
++	u8						SsidBuf[33];
++	u8*						ssid_octet;
++	u16 						ssid_length;
++} RT_PMKID_LIST, *PRT_PMKID_LIST;
++
++
++struct security_priv
++{
++	u32	  dot11AuthAlgrthm;		// 802.11 auth, could be open, shared, 8021x and authswitch 
++	u32	  dot11PrivacyAlgrthm;	// This specify the privacy for shared auth. algorithm.
++
++	/* WEP */
++	u32	  dot11PrivacyKeyIndex;	// this is only valid for legendary wep, 0~3 for key id. (tx key index)
++	union Keytype dot11DefKey[4];			// this is only valid for def. key	
++	u32 	dot11DefKeylen[4];
++	u8 	key_mask; /* use to restore wep key after hal_init */
++
++	u32 dot118021XGrpPrivacy;	// This specify the privacy algthm. used for Grp key 
++	u32	dot118021XGrpKeyid;		// key id used for Grp Key ( tx key index)
++	union Keytype	dot118021XGrpKey[4];	// 802.1x Group Key, for inx0 and inx1	
++	union Keytype	dot118021XGrptxmickey[4];
++	union Keytype	dot118021XGrprxmickey[4];
++	union pn48		dot11Grptxpn;			// PN48 used for Grp Key xmit.
++	union pn48		dot11Grprxpn;			// PN48 used for Grp Key recv.
++#ifdef CONFIG_IEEE80211W
++	u32	dot11wBIPKeyid;						// key id used for BIP Key ( tx key index)
++	union Keytype	dot11wBIPKey[6];		// BIP Key, for index4 and index5
++	union pn48		dot11wBIPtxpn;			// PN48 used for Grp Key xmit.
++	union pn48		dot11wBIPrxpn;			// PN48 used for Grp Key recv.
++#endif //CONFIG_IEEE80211W
++#ifdef CONFIG_AP_MODE
++	//extend security capabilities for AP_MODE 
++	unsigned int dot8021xalg;//0:disable, 1:psk, 2:802.1x
++	unsigned int wpa_psk;//0:disable, bit(0): WPA, bit(1):WPA2
++	unsigned int wpa_group_cipher;
++	unsigned int wpa2_group_cipher;
++	unsigned int wpa_pairwise_cipher;
++	unsigned int wpa2_pairwise_cipher;	
++#endif
++
++	u8 wps_ie[MAX_WPS_IE_LEN];//added in assoc req
++	int wps_ie_len;
++	
++	
++	u8	binstallGrpkey;
++#ifdef CONFIG_IEEE80211W
++	u8	binstallBIPkey;
++#endif //CONFIG_IEEE80211W
++	u8	busetkipkey;
++	//_timer tkip_timer;
++	u8	bcheck_grpkey;
++	u8	bgrpkey_handshake;
++	
++	//u8	packet_cnt;//unused, removed
++	
++	s32	sw_encrypt;//from registry_priv
++	s32	sw_decrypt;//from registry_priv
++	
++	s32 	hw_decrypted;//if the rx packets is hw_decrypted==_FALSE, it means the hw has not been ready.
++
++
++	//keeps the auth_type & enc_status from upper layer ioctl(wpa_supplicant or wzc)
++	u32 ndisauthtype;	// NDIS_802_11_AUTHENTICATION_MODE
++	u32 ndisencryptstatus;	// NDIS_802_11_ENCRYPTION_STATUS
++
++	WLAN_BSSID_EX sec_bss;  //for joinbss (h2c buffer) usage
++
++	NDIS_802_11_WEP ndiswep;
++#ifdef PLATFORM_WINDOWS
++	u8 KeyMaterial[16];// variable length depending on above field.
++#endif
++
++	u8 assoc_info[600];
++	u8 szofcapability[256]; //for wpa2 usage
++	u8 oidassociation[512]; //for wpa/wpa2 usage
++	u8 authenticator_ie[256];  //store ap security information element
++	u8 supplicant_ie[256];  //store sta security information element
++
++
++	//for tkip countermeasure
++	u32 last_mic_err_time;	
++	u8	btkip_countermeasure;
++	u8	btkip_wait_report;
++	u32 btkip_countermeasure_time;
++
++	//---------------------------------------------------------------------------
++	// For WPA2 Pre-Authentication.
++	//---------------------------------------------------------------------------
++	//u8				RegEnablePreAuth;				// Default value: Pre-Authentication enabled or not, from registry "EnablePreAuth". Added by Annie, 2005-11-01.
++	//u8				EnablePreAuthentication;			// Current Value: Pre-Authentication enabled or not.
++	RT_PMKID_LIST		PMKIDList[NUM_PMKID_CACHE];	// Renamed from PreAuthKey[NUM_PRE_AUTH_KEY]. Annie, 2006-10-13.
++	u8				PMKIDIndex;
++	//u32				PMKIDCount;						// Added by Annie, 2006-10-13.
++	//u8				szCapability[256];				// For WPA2-PSK using zero-config, by Annie, 2005-09-20.
++
++	u8 bWepDefaultKeyIdxSet;
++};
++
++struct sha256_state {
++	u64 length;
++	u32 state[8], curlen;
++	u8 buf[64];
++};
++
++#define GET_ENCRY_ALGO(psecuritypriv, psta, encry_algo, bmcst)\
++do{\
++	switch(psecuritypriv->dot11AuthAlgrthm)\
++	{\
++		case dot11AuthAlgrthm_Open:\
++		case dot11AuthAlgrthm_Shared:\
++		case dot11AuthAlgrthm_Auto:\
++			encry_algo = (u8)psecuritypriv->dot11PrivacyAlgrthm;\
++			break;\
++		case dot11AuthAlgrthm_8021X:\
++			if(bmcst)\
++				encry_algo = (u8)psecuritypriv->dot118021XGrpPrivacy;\
++			else\
++				encry_algo =(u8) psta->dot118021XPrivacy;\
++			break;\
++	}\
++}while(0)
++
++
++#define SET_ICE_IV_LEN( iv_len, icv_len, encrypt)\
++do{\
++	switch(encrypt)\
++	{\
++		case _WEP40_:\
++		case _WEP104_:\
++			iv_len = 4;\
++			icv_len = 4;\
++			break;\
++		case _TKIP_:\
++			iv_len = 8;\
++			icv_len = 4;\
++			break;\
++		case _AES_:\
++			iv_len = 8;\
++			icv_len = 8;\
++			break;\
++		default:\
++			iv_len = 0;\
++			icv_len = 0;\
++			break;\
++	}\
++}while(0)
++
++
++#define GET_TKIP_PN(iv,dot11txpn)\
++do{\
++	dot11txpn._byte_.TSC0=iv[2];\
++	dot11txpn._byte_.TSC1=iv[0];\
++	dot11txpn._byte_.TSC2=iv[4];\
++	dot11txpn._byte_.TSC3=iv[5];\
++	dot11txpn._byte_.TSC4=iv[6];\
++	dot11txpn._byte_.TSC5=iv[7];\
++}while(0)
++
++
++#define ROL32( A, n )	( ((A) << (n)) | ( ((A)>>(32-(n)))  & ( (1UL << (n)) - 1 ) ) )
++#define ROR32( A, n ) 	ROL32( (A), 32-(n) )
++
++struct mic_data
++{
++	u32  K0, K1;         // Key
++	u32  L, R;           // Current state
++	u32  M;              // Message accumulator (single word)
++	u32     nBytesInM;      // # bytes in M
++};
++
++extern const u32 Te0[256];
++extern const u32 Te1[256];
++extern const u32 Te2[256];
++extern const u32 Te3[256];
++extern const u32 Te4[256];
++extern const u32 Td0[256];
++extern const u32 Td1[256];
++extern const u32 Td2[256];
++extern const u32 Td3[256];
++extern const u32 Td4[256];
++extern const u32 rcon[10];
++extern const u8 Td4s[256];
++extern const u8 rcons[10];
++
++#define RCON(i) (rcons[(i)] << 24)
++
++static inline u32 rotr(u32 val, int bits)
++{
++	return (val >> bits) | (val << (32 - bits));
++}
++
++#define TE0(i) Te0[((i) >> 24) & 0xff]
++#define TE1(i) rotr(Te0[((i) >> 16) & 0xff], 8)
++#define TE2(i) rotr(Te0[((i) >> 8) & 0xff], 16)
++#define TE3(i) rotr(Te0[(i) & 0xff], 24)
++#define TE41(i) ((Te0[((i) >> 24) & 0xff] << 8) & 0xff000000)
++#define TE42(i) (Te0[((i) >> 16) & 0xff] & 0x00ff0000)
++#define TE43(i) (Te0[((i) >> 8) & 0xff] & 0x0000ff00)
++#define TE44(i) ((Te0[(i) & 0xff] >> 8) & 0x000000ff)
++#define TE421(i) ((Te0[((i) >> 16) & 0xff] << 8) & 0xff000000)
++#define TE432(i) (Te0[((i) >> 8) & 0xff] & 0x00ff0000)
++#define TE443(i) (Te0[(i) & 0xff] & 0x0000ff00)
++#define TE414(i) ((Te0[((i) >> 24) & 0xff] >> 8) & 0x000000ff)
++#define TE4(i) ((Te0[(i)] >> 8) & 0x000000ff)
++
++#define TD0(i) Td0[((i) >> 24) & 0xff]
++#define TD1(i) rotr(Td0[((i) >> 16) & 0xff], 8)
++#define TD2(i) rotr(Td0[((i) >> 8) & 0xff], 16)
++#define TD3(i) rotr(Td0[(i) & 0xff], 24)
++#define TD41(i) (Td4s[((i) >> 24) & 0xff] << 24)
++#define TD42(i) (Td4s[((i) >> 16) & 0xff] << 16)
++#define TD43(i) (Td4s[((i) >> 8) & 0xff] << 8)
++#define TD44(i) (Td4s[(i) & 0xff])
++#define TD0_(i) Td0[(i) & 0xff]
++#define TD1_(i) rotr(Td0[(i) & 0xff], 8)
++#define TD2_(i) rotr(Td0[(i) & 0xff], 16)
++#define TD3_(i) rotr(Td0[(i) & 0xff], 24)
++
++#define GETU32(pt) (((u32)(pt)[0] << 24) ^ ((u32)(pt)[1] << 16) ^ \
++			((u32)(pt)[2] <<  8) ^ ((u32)(pt)[3]))
++
++#define PUTU32(ct, st) { \
++(ct)[0] = (u8)((st) >> 24); (ct)[1] = (u8)((st) >> 16); \
++(ct)[2] = (u8)((st) >>  8); (ct)[3] = (u8)(st); }
++
++#define WPA_GET_BE32(a) ((((u32) (a)[0]) << 24) | (((u32) (a)[1]) << 16) | \
++			 (((u32) (a)[2]) << 8) | ((u32) (a)[3]))
++
++#define WPA_PUT_LE16(a, val)			\
++	do {					\
++		(a)[1] = ((u16) (val)) >> 8;	\
++		(a)[0] = ((u16) (val)) & 0xff;	\
++	} while (0)
++
++#define WPA_PUT_BE32(a, val)					\
++	do {							\
++		(a)[0] = (u8) ((((u32) (val)) >> 24) & 0xff);	\
++		(a)[1] = (u8) ((((u32) (val)) >> 16) & 0xff);	\
++		(a)[2] = (u8) ((((u32) (val)) >> 8) & 0xff);	\
++		(a)[3] = (u8) (((u32) (val)) & 0xff);		\
++	} while (0)
++
++#define WPA_PUT_BE64(a, val)				\
++	do {						\
++		(a)[0] = (u8) (((u64) (val)) >> 56);	\
++		(a)[1] = (u8) (((u64) (val)) >> 48);	\
++		(a)[2] = (u8) (((u64) (val)) >> 40);	\
++		(a)[3] = (u8) (((u64) (val)) >> 32);	\
++		(a)[4] = (u8) (((u64) (val)) >> 24);	\
++		(a)[5] = (u8) (((u64) (val)) >> 16);	\
++		(a)[6] = (u8) (((u64) (val)) >> 8);	\
++		(a)[7] = (u8) (((u64) (val)) & 0xff);	\
++	} while (0)
++	
++/* ===== start - public domain SHA256 implementation ===== */
++
++/* This is based on SHA256 implementation in LibTomCrypt that was released into
++ * public domain by Tom St Denis. */
++
++/* the K array */
++static const unsigned long K[64] = {
++	0x428a2f98UL, 0x71374491UL, 0xb5c0fbcfUL, 0xe9b5dba5UL, 0x3956c25bUL,
++	0x59f111f1UL, 0x923f82a4UL, 0xab1c5ed5UL, 0xd807aa98UL, 0x12835b01UL,
++	0x243185beUL, 0x550c7dc3UL, 0x72be5d74UL, 0x80deb1feUL, 0x9bdc06a7UL,
++	0xc19bf174UL, 0xe49b69c1UL, 0xefbe4786UL, 0x0fc19dc6UL, 0x240ca1ccUL,
++	0x2de92c6fUL, 0x4a7484aaUL, 0x5cb0a9dcUL, 0x76f988daUL, 0x983e5152UL,
++	0xa831c66dUL, 0xb00327c8UL, 0xbf597fc7UL, 0xc6e00bf3UL, 0xd5a79147UL,
++	0x06ca6351UL, 0x14292967UL, 0x27b70a85UL, 0x2e1b2138UL, 0x4d2c6dfcUL,
++	0x53380d13UL, 0x650a7354UL, 0x766a0abbUL, 0x81c2c92eUL, 0x92722c85UL,
++	0xa2bfe8a1UL, 0xa81a664bUL, 0xc24b8b70UL, 0xc76c51a3UL, 0xd192e819UL,
++	0xd6990624UL, 0xf40e3585UL, 0x106aa070UL, 0x19a4c116UL, 0x1e376c08UL,
++	0x2748774cUL, 0x34b0bcb5UL, 0x391c0cb3UL, 0x4ed8aa4aUL, 0x5b9cca4fUL,
++	0x682e6ff3UL, 0x748f82eeUL, 0x78a5636fUL, 0x84c87814UL, 0x8cc70208UL,
++	0x90befffaUL, 0xa4506cebUL, 0xbef9a3f7UL, 0xc67178f2UL
++};
++
++
++/* Various logical functions */
++#define RORc(x, y) \
++( ((((unsigned long) (x) & 0xFFFFFFFFUL) >> (unsigned long) ((y) & 31)) | \
++   ((unsigned long) (x) << (unsigned long) (32 - ((y) & 31)))) & 0xFFFFFFFFUL)
++#define Ch(x,y,z)       (z ^ (x & (y ^ z)))
++#define Maj(x,y,z)      (((x | y) & z) | (x & y)) 
++#define S(x, n)         RORc((x), (n))
++#define R(x, n)         (((x)&0xFFFFFFFFUL)>>(n))
++#define Sigma0(x)       (S(x, 2) ^ S(x, 13) ^ S(x, 22))
++#define Sigma1(x)       (S(x, 6) ^ S(x, 11) ^ S(x, 25))
++#define Gamma0(x)       (S(x, 7) ^ S(x, 18) ^ R(x, 3))
++#define Gamma1(x)       (S(x, 17) ^ S(x, 19) ^ R(x, 10))
++#ifndef MIN
++#define MIN(x, y) (((x) < (y)) ? (x) : (y))
++#endif
++#ifdef CONFIG_IEEE80211W
++int omac1_aes_128(u8 *key, u8 *data, size_t data_len, u8 *mac);
++#endif //CONFIG_IEEE80211W
++void rtw_secmicsetkey(struct mic_data *pmicdata, u8 * key );
++void rtw_secmicappendbyte(struct mic_data *pmicdata, u8 b );
++void rtw_secmicappend(struct mic_data *pmicdata, u8 * src, u32 nBytes );
++void rtw_secgetmic(struct mic_data *pmicdata, u8 * dst );
++
++void rtw_seccalctkipmic(
++	u8 * key,
++	u8 *header,
++	u8 *data,
++	u32 data_len,
++	u8 *Miccode,
++	u8   priority);
++
++u32 rtw_aes_encrypt(_adapter *padapter, u8 *pxmitframe);
++u32 rtw_tkip_encrypt(_adapter *padapter, u8 *pxmitframe);
++void rtw_wep_encrypt(_adapter *padapter, u8  *pxmitframe);
++
++u32 rtw_aes_decrypt(_adapter *padapter, u8  *precvframe);
++u32 rtw_tkip_decrypt(_adapter *padapter, u8  *precvframe);
++void rtw_wep_decrypt(_adapter *padapter, u8  *precvframe);
++#ifdef CONFIG_IEEE80211W
++u32	rtw_BIP_verify(_adapter *padapter, u8 *precvframe);
++#endif //CONFIG_IEEE80211W
++#ifdef CONFIG_TDLS
++void wpa_tdls_generate_tpk(_adapter *padapter, struct sta_info *psta);
++int wpa_tdls_ftie_mic(u8 *kck, u8 trans_seq, 
++						u8 *lnkid, u8 *rsnie, u8 *timeoutie, u8 *ftie,
++						u8 *mic);
++int tdls_verify_mic(u8 *kck, u8 trans_seq, 
++						u8 *lnkid, u8 *rsnie, u8 *timeoutie, u8 *ftie);
++#endif //CONFIG_TDLS
++
++#ifdef PLATFORM_WINDOWS
++void rtw_use_tkipkey_handler (
++	IN	PVOID					SystemSpecific1,
++	IN	PVOID					FunctionContext,
++	IN	PVOID					SystemSpecific2,
++	IN	PVOID					SystemSpecific3
++	);
++#endif
++#ifdef PLATFORM_LINUX
++void rtw_use_tkipkey_handler(void* FunctionContext);
++#endif
++
++#ifdef PLATFORM_FREEBSD
++void rtw_use_tkipkey_handler(void* FunctionContext);
++#endif //PLATFORM_FREEBSD
++
++void rtw_sec_restore_wep_key(_adapter *adapter);
++u8 rtw_handle_tkip_countermeasure(_adapter* adapter, const char *caller);
++
++#endif	//__RTL871X_SECURITY_H_
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_sreset.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_sreset.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_sreset.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_sreset.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,74 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef _RTW_SRESET_C_
++#define _RTW_SRESET_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++
++enum {
++	SRESET_TGP_NULL = 0,
++	SRESET_TGP_XMIT_STATUS = 1,
++	SRESET_TGP_LINK_STATUS = 2,
++};
++
++struct sreset_priv {
++	_mutex 	silentreset_mutex;
++	u8 	silent_reset_inprogress;
++	u8	Wifi_Error_Status;
++	unsigned long last_tx_time;
++	unsigned long last_tx_complete_time;
++
++	s32 dbg_trigger_point;
++};
++
++#ifdef CONFIG_RTL8192C
++#include <rtl8192c_hal.h>
++#endif
++#ifdef CONFIG_RTL8192D
++#include <rtl8192d_hal.h>
++#endif
++#ifdef CONFIG_RTL8723A
++#include <rtl8723a_hal.h>
++#endif
++#ifdef CONFIG_RTL8188E
++#include <rtl8188e_hal.h>
++#endif
++
++#define	WIFI_STATUS_SUCCESS 		0
++#define	USB_VEN_REQ_CMD_FAIL 	BIT0
++#define	USB_READ_PORT_FAIL 		BIT1
++#define	USB_WRITE_PORT_FAIL		BIT2
++#define	WIFI_MAC_TXDMA_ERROR 	BIT3			
++#define   WIFI_TX_HANG				BIT4
++#define	WIFI_RX_HANG				BIT5
++#define 	WIFI_IF_NOT_EXIST			BIT6
++
++void sreset_init_value(_adapter *padapter);
++void sreset_reset_value(_adapter *padapter);
++u8 sreset_get_wifi_status(_adapter *padapter);
++void sreset_set_wifi_error_status(_adapter *padapter, u32 status);
++void sreset_set_trigger_point(_adapter *padapter, s32 tgp);
++bool sreset_inprogress(_adapter *padapter);
++void sreset_reset(_adapter *padapter);
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_tdls.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_tdls.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_tdls.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_tdls.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,143 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __RTW_TDLS_H_
++#define __RTW_TDLS_H_
++
++#include <drv_types.h>
++
++#ifdef CONFIG_TDLS
++/* TDLS STA state */
++#define	TDLS_STATE_NONE				0x00000000	//default state
++#define	TDLS_INITIATOR_STATE			0x10000000
++#define	TDLS_RESPONDER_STATE			0x20000000
++#define	TDLS_LINKED_STATE				0x40000000
++#define	TDLS_CH_SWITCH_ON_STATE		0x01000000
++#define	TDLS_PEER_AT_OFF_STATE		0x02000000	//could send pkt on target ch
++#define	TDLS_AT_OFF_CH_STATE			0x04000000
++#define	TDLS_CH_SW_INITIATOR_STATE	0x08000000	//avoiding duplicated or unconditional ch. switch rsp.
++#define	TDLS_APSD_CHSW_STATE		0x00100000	//in APSD and want to setup channel switch
++#define	TDLS_PEER_SLEEP_STATE		0x00200000	//peer sta is sleeping
++#define	TDLS_SW_OFF_STATE			0x00400000	//terminate channel swithcing
++#define	TDLS_ALIVE_STATE				0x00010000	//Check if peer sta is alived.
++
++#define	TPK_RESEND_COUNT				301
++#define 	CH_SWITCH_TIME				10
++#define 	CH_SWITCH_TIMEOUT			30
++#define	TDLS_STAY_TIME				500
++#define	TDLS_SIGNAL_THRESH			0x20
++#define	TDLS_WATCHDOG_PERIOD		10	//Periodically sending tdls discovery request in TDLS_WATCHDOG_PERIOD * 2 sec
++#define	TDLS_ALIVE_TIMER_PH1			5000
++#define	TDLS_ALIVE_TIMER_PH2			2000
++#define	TDLS_STAY_TIME				500
++#define	TDLS_HANDSHAKE_TIME			2000
++#define	TDLS_ALIVE_COUNT				3
++#define	TDLS_INI_MACID_ENTRY			6
++
++/* TDLS */
++#define TDLS_MIC_LEN 16
++#define WPA_NONCE_LEN 32
++#define TDLS_TIMEOUT_LEN 4
++
++struct wpa_tdls_ftie {
++	u8 ie_type; /* FTIE */
++	u8 ie_len;
++	u8 mic_ctrl[2];
++	u8 mic[TDLS_MIC_LEN];
++	u8 Anonce[WPA_NONCE_LEN]; /* Responder Nonce in TDLS */
++	u8 Snonce[WPA_NONCE_LEN]; /* Initiator Nonce in TDLS */
++	/* followed by optional elements */
++} ;
++
++struct wpa_tdls_lnkid {
++	u8 ie_type; /* Link Identifier IE */
++	u8 ie_len;
++	u8 bssid[ETH_ALEN];
++	u8 init_sta[ETH_ALEN];
++	u8 resp_sta[ETH_ALEN];
++} ;
++
++static u8 TDLS_RSNIE[]={	0x01, 0x00,	//version shall be set to 1
++						0x00, 0x0f, 0xac, 0x07,	//group sipher suite
++						0x01, 0x00,	//pairwise cipher suite count
++						0x00, 0x0f, 0xac, 0x04,	//pairwise cipher suite list; CCMP only
++						0x01, 0x00,	//AKM suite count
++						0x00, 0x0f, 0xac, 0x07,	//TPK Handshake
++						0x00, 0x02,
++						//PMKID shall not be present
++						};
++
++static u8 TDLS_WMMIE[]={0x00, 0x50, 0xf2, 0x02, 0x00, 0x01, 0x00};	//Qos info all set zero
++
++static u8 TDLS_EXT_CAPIE[] = {0x00, 0x00, 0x00, 0x50, 0x20};	//bit(28), bit(30), bit(37)
++
++//	SRC: Supported Regulatory Classes
++static u8 TDLS_SRC[] = { 0x01, 0x01, 0x02, 0x03, 0x04, 0x0c, 0x16, 0x17, 0x18, 0x19, 0x1b, 0x1c, 0x1d, 0x1e, 0x20, 0x21 };
++
++void rtw_reset_tdls_info(_adapter* padapter);
++int rtw_init_tdls_info(_adapter* padapter);
++void rtw_free_tdls_info(struct tdls_info *ptdlsinfo);
++void issue_nulldata_to_TDLS_peer_STA(_adapter *padapter, struct sta_info *ptdls_sta, unsigned int power_mode);
++void init_TPK_timer(_adapter *padapter, struct sta_info *psta);
++void init_ch_switch_timer(_adapter *padapter, struct sta_info *psta);
++void init_base_ch_timer(_adapter *padapter, struct sta_info *psta);
++void init_off_ch_timer(_adapter *padapter, struct sta_info *psta);
++void init_tdls_alive_timer(_adapter *padapter, struct sta_info *psta);
++void init_handshake_timer(_adapter *padapter, struct sta_info *psta);
++void free_tdls_sta(_adapter *padapter, struct sta_info *ptdls_sta);
++#ifdef CONFIG_WFD
++void issue_tunneled_probe_req(_adapter *padapter);
++void issue_tunneled_probe_rsp(_adapter *padapter, union recv_frame *precv_frame);
++#endif //CONFIG_WFD
++void issue_tdls_dis_req(_adapter *padapter, u8 *mac_addr);
++void issue_tdls_setup_req(_adapter *padapter, u8 *mac_addr);
++void issue_tdls_setup_rsp(_adapter *padapter, union recv_frame *precv_frame);
++void issue_tdls_setup_cfm(_adapter *padapter, union recv_frame *precv_frame);
++void issue_tdls_dis_rsp(_adapter * padapter, union recv_frame * precv_frame, u8 dialog);
++void issue_tdls_teardown(_adapter *padapter, u8 *mac_addr);
++void issue_tdls_peer_traffic_indication(_adapter *padapter, struct sta_info *psta);
++void issue_tdls_ch_switch_req(_adapter *padapter, u8 *mac_addr);
++void issue_tdls_ch_switch_rsp(_adapter *padapter, u8 *mac_addr);
++sint On_TDLS_Dis_Rsp(_adapter *adapter, union recv_frame *precv_frame);
++sint On_TDLS_Setup_Req(_adapter *adapter, union recv_frame *precv_frame);
++sint On_TDLS_Setup_Rsp(_adapter *adapter, union recv_frame *precv_frame);
++sint On_TDLS_Setup_Cfm(_adapter *adapter, union recv_frame *precv_frame);
++sint On_TDLS_Dis_Req(_adapter *adapter, union recv_frame *precv_frame);
++sint On_TDLS_Teardown(_adapter *adapter, union recv_frame *precv_frame);
++sint On_TDLS_Peer_Traffic_Rsp(_adapter *adapter, union recv_frame *precv_frame);
++sint On_TDLS_Ch_Switch_Req(_adapter *adapter, union recv_frame *precv_frame);
++sint On_TDLS_Ch_Switch_Rsp(_adapter *adapter, union recv_frame *precv_frame);
++void rtw_build_tdls_setup_req_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe);
++void rtw_build_tdls_setup_rsp_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe);
++void rtw_build_tdls_setup_cfm_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe);
++void rtw_build_tdls_teardown_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe);
++void rtw_build_tdls_dis_req_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe);
++void rtw_build_tdls_dis_rsp_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe, u8 dialog);
++void rtw_build_tdls_peer_traffic_indication_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe);
++void rtw_build_tdls_ch_switch_req_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe);
++void rtw_build_tdls_ch_switch_rsp_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe);
++void rtw_build_tunneled_probe_req_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe);
++void rtw_build_tunneled_probe_rsp_ies(_adapter * padapter, struct xmit_frame * pxmitframe, u8 *pframe);
++
++int update_sgi_tdls(_adapter *padapter, struct sta_info *psta);
++u32 update_mask_tdls(_adapter *padapter, struct sta_info *psta);
++#endif //CONFIG_TDLS
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_version.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_version.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_version.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_version.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1 @@
++#define DRIVERVERSION	"v4.0.2_9000.20130911"
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_xmit.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_xmit.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/rtw_xmit.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/rtw_xmit.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,754 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef _RTW_XMIT_H_
++#define _RTW_XMIT_H_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#ifdef PLATFORM_FREEBSD
++#include <if_ether.h>
++#endif //PLATFORM_FREEBSD
++
++#ifdef CONFIG_SDIO_HCI
++//#define MAX_XMITBUF_SZ (30720)//	(2048)
++#define MAX_XMITBUF_SZ (12288)
++#define NR_XMITBUFF	(16)
++
++#elif defined (CONFIG_USB_HCI)
++#ifdef CONFIG_USB_TX_AGGREGATION
++	#if defined(CONFIG_PLATFORM_ARM_SUNxI) || defined(CONFIG_PLATFORM_ARM_SUN6I)
++		#define MAX_XMITBUF_SZ (12288)  //12k 1536*8
++	#elif defined (CONFIG_PLATFORM_MSTAR)
++		#define MAX_XMITBUF_SZ	7680	// 7.5k
++	#else
++		#define MAX_XMITBUF_SZ	(20480)	// 20k
++	#endif
++#else
++#define MAX_XMITBUF_SZ	(2048)
++#endif //CONFIG_USB_TX_AGGREGATION
++#ifdef CONFIG_SINGLE_XMIT_BUF
++#define NR_XMITBUFF	(1)
++#else
++#define NR_XMITBUFF	(4)
++#endif //CONFIG_SINGLE_XMIT_BUF
++
++#elif defined (CONFIG_PCI_HCI)
++#define MAX_XMITBUF_SZ	(1664)
++#define NR_XMITBUFF	(128)
++#endif
++
++#ifdef PLATFORM_OS_CE
++#define XMITBUF_ALIGN_SZ 4
++#else
++#ifdef CONFIG_PCI_HCI
++#define XMITBUF_ALIGN_SZ 4
++#else
++#define XMITBUF_ALIGN_SZ 512
++#endif
++#endif
++
++// xmit extension buff defination
++#define MAX_XMIT_EXTBUF_SZ	(1536)
++#ifdef CONFIG_SINGLE_XMIT_BUF
++#define NR_XMIT_EXTBUFF	(1)
++#else
++#define NR_XMIT_EXTBUFF	(32)
++#endif //CONFIG_SINGLE_XMIT_BUF
++
++#define MAX_NUMBLKS		(1)
++
++#define XMIT_VO_QUEUE (0)
++#define XMIT_VI_QUEUE (1)
++#define XMIT_BE_QUEUE (2)
++#define XMIT_BK_QUEUE (3)
++
++#define VO_QUEUE_INX		0
++#define VI_QUEUE_INX		1
++#define BE_QUEUE_INX		2
++#define BK_QUEUE_INX		3
++#define BCN_QUEUE_INX		4
++#define MGT_QUEUE_INX		5
++#define HIGH_QUEUE_INX		6
++#define TXCMD_QUEUE_INX	7
++
++#define HW_QUEUE_ENTRY	8
++
++#ifdef CONFIG_PCI_HCI
++//#define TXDESC_NUM						64
++#define TXDESC_NUM						128
++#define TXDESC_NUM_BE_QUEUE			128
++#endif
++
++#define WEP_IV(pattrib_iv, dot11txpn, keyidx)\
++do{\
++	pattrib_iv[0] = dot11txpn._byte_.TSC0;\
++	pattrib_iv[1] = dot11txpn._byte_.TSC1;\
++	pattrib_iv[2] = dot11txpn._byte_.TSC2;\
++	pattrib_iv[3] = ((keyidx & 0x3)<<6);\
++	dot11txpn.val = (dot11txpn.val == 0xffffff) ? 0: (dot11txpn.val+1);\
++}while(0)
++
++
++#define TKIP_IV(pattrib_iv, dot11txpn, keyidx)\
++do{\
++	pattrib_iv[0] = dot11txpn._byte_.TSC1;\
++	pattrib_iv[1] = (dot11txpn._byte_.TSC1 | 0x20) & 0x7f;\
++	pattrib_iv[2] = dot11txpn._byte_.TSC0;\
++	pattrib_iv[3] = BIT(5) | ((keyidx & 0x3)<<6);\
++	pattrib_iv[4] = dot11txpn._byte_.TSC2;\
++	pattrib_iv[5] = dot11txpn._byte_.TSC3;\
++	pattrib_iv[6] = dot11txpn._byte_.TSC4;\
++	pattrib_iv[7] = dot11txpn._byte_.TSC5;\
++	dot11txpn.val = dot11txpn.val == 0xffffffffffffULL ? 0: (dot11txpn.val+1);\
++}while(0)
++
++#define AES_IV(pattrib_iv, dot11txpn, keyidx)\
++do{\
++	pattrib_iv[0] = dot11txpn._byte_.TSC0;\
++	pattrib_iv[1] = dot11txpn._byte_.TSC1;\
++	pattrib_iv[2] = 0;\
++	pattrib_iv[3] = BIT(5) | ((keyidx & 0x3)<<6);\
++	pattrib_iv[4] = dot11txpn._byte_.TSC2;\
++	pattrib_iv[5] = dot11txpn._byte_.TSC3;\
++	pattrib_iv[6] = dot11txpn._byte_.TSC4;\
++	pattrib_iv[7] = dot11txpn._byte_.TSC5;\
++	dot11txpn.val = dot11txpn.val == 0xffffffffffffULL ? 0: (dot11txpn.val+1);\
++}while(0)
++
++
++#define HWXMIT_ENTRY	4
++
++#define TXDESC_SIZE 32
++
++#ifdef CONFIG_SDIO_HCI
++#define TXDESC_OFFSET TXDESC_SIZE
++#endif
++
++#ifdef CONFIG_USB_HCI
++#define PACKET_OFFSET_SZ (8)
++#define TXDESC_OFFSET (TXDESC_SIZE + PACKET_OFFSET_SZ)
++#endif
++
++#ifdef CONFIG_PCI_HCI
++#define TXDESC_OFFSET 0
++#define TX_DESC_NEXT_DESC_OFFSET	40
++#endif
++
++//
++//defined for TX DESC Operation
++//
++
++#define MAX_TID (15)
++
++//OFFSET 0
++#define OFFSET_SZ	0
++#define OFFSET_SHT	16
++#define BMC		BIT(24)
++#define LSG		BIT(26)
++#define FSG		BIT(27)
++#define OWN 		BIT(31)
++
++//OFFSET 4
++#define PKT_OFFSET_SZ	0
++#define BK		BIT(6)
++#define QSEL_SHT	8
++#define Rate_ID_SHT	16
++#define NAVUSEHDR	BIT(20)
++#define PKT_OFFSET_SHT	26
++#define HWPC		BIT(31)
++
++//OFFSET 8
++#define AGG_EN		BIT(29)
++
++//OFFSET 12
++#define SEQ_SHT		16
++
++//OFFSET 16
++#define QoS		BIT(6)
++#define HW_SEQ_EN	BIT(7)
++#define USERATE		BIT(8)
++#define DISDATAFB	BIT(10)
++#define DATA_SHORT	BIT(24)
++#define DATA_BW		BIT(25)
++
++//OFFSET 20
++#define SGI		BIT(6)
++
++struct tx_desc{
++
++	//DWORD 0
++	unsigned int txdw0;
++
++	unsigned int txdw1;
++
++	unsigned int txdw2;
++
++	unsigned int txdw3;
++
++	unsigned int txdw4;
++
++	unsigned int txdw5;
++
++	unsigned int txdw6;
++
++	unsigned int txdw7;
++#ifdef CONFIG_PCI_HCI
++	unsigned int txdw8;
++
++	unsigned int txdw9;
++
++	unsigned int txdw10;
++
++	unsigned int txdw11;
++
++	// 2008/05/15 MH Because PCIE HW memory R/W 4K limit. And now,  our descriptor
++	// size is 40 bytes. If you use more than 102 descriptor( 103*40>4096), HW will execute
++	// memoryR/W CRC error. And then all DMA fetch will fail. We must decrease descriptor
++	// number or enlarge descriptor size as 64 bytes.
++	unsigned int txdw12;
++
++	unsigned int txdw13;
++
++	unsigned int txdw14;
++
++	unsigned int txdw15;
++#endif
++};
++
++
++union txdesc {
++	struct tx_desc txdesc;
++	unsigned int value[TXDESC_SIZE>>2];
++};
++
++#ifdef CONFIG_PCI_HCI
++#define PCI_MAX_TX_QUEUE_COUNT	8
++
++struct rtw_tx_ring {
++	struct tx_desc	*desc;
++	dma_addr_t		dma;
++	unsigned int		idx;
++	unsigned int		entries;
++	_queue			queue;
++	u32				qlen;
++};
++#endif
++
++struct	hw_xmit	{
++	//_lock xmit_lock;
++	//_list	pending;
++	_queue *sta_queue;
++	//struct hw_txqueue *phwtxqueue;
++	//sint	txcmdcnt;
++	int	accnt;
++};
++
++#if 0
++struct pkt_attrib
++{
++	u8	type;
++	u8	subtype;
++	u8	bswenc;
++	u8	dhcp_pkt;
++	u16	ether_type;
++	int	pktlen;		//the original 802.3 pkt raw_data len (not include ether_hdr data)
++	int	pkt_hdrlen;	//the original 802.3 pkt header len
++	int	hdrlen;		//the WLAN Header Len
++	int	nr_frags;
++	int	last_txcmdsz;
++	int	encrypt;	//when 0 indicate no encrypt. when non-zero, indicate the encrypt algorith
++	u8	iv[8];
++	int	iv_len;
++	u8	icv[8];
++	int	icv_len;
++	int	priority;
++	int	ack_policy;
++	int	mac_id;
++	int	vcs_mode;	//virtual carrier sense method
++
++	u8 	dst[ETH_ALEN];
++	u8	src[ETH_ALEN];
++	u8	ta[ETH_ALEN];
++	u8 	ra[ETH_ALEN];
++
++	u8	key_idx;
++
++	u8	qos_en;
++	u8	ht_en;
++	u8	raid;//rate adpative id
++	u8	bwmode;
++	u8	ch_offset;//PRIME_CHNL_OFFSET
++	u8	sgi;//short GI
++	u8	ampdu_en;//tx ampdu enable
++	u8	mdata;//more data bit
++	u8	eosp;
++
++	u8	pctrl;//per packet txdesc control enable
++	u8	triggered;//for ap mode handling Power Saving sta
++
++	u32	qsel;
++	u16	seqnum;
++
++	struct sta_info * psta;
++#ifdef CONFIG_TCP_CSUM_OFFLOAD_TX
++	u8	hw_tcp_csum;
++#endif
++};
++#else
++//reduce size
++struct pkt_attrib
++{
++	u8	type;
++	u8	subtype;
++	u8	bswenc;
++	u8	dhcp_pkt;
++	u16	ether_type;
++	u16	seqnum;
++	u16	pkt_hdrlen;	//the original 802.3 pkt header len
++	u16	hdrlen;		//the WLAN Header Len
++	u32	pktlen;		//the original 802.3 pkt raw_data len (not include ether_hdr data)
++	u32	last_txcmdsz;
++	u8	nr_frags;
++	u8	encrypt;	//when 0 indicate no encrypt. when non-zero, indicate the encrypt algorith
++	u8	iv_len;
++	u8	icv_len;
++	u8	iv[8];
++	u8	icv[8];
++	u8	priority;
++	u8	ack_policy;
++	u8	mac_id;
++	u8	vcs_mode;	//virtual carrier sense method
++	u8 	dst[ETH_ALEN];
++	u8	src[ETH_ALEN];
++	u8	ta[ETH_ALEN];
++	u8 	ra[ETH_ALEN];
++	u8	key_idx;
++	u8	qos_en;
++	u8	ht_en;
++	u8	raid;//rate adpative id
++	u8	bwmode;
++	u8	ch_offset;//PRIME_CHNL_OFFSET
++	u8	sgi;//short GI
++	u8	ampdu_en;//tx ampdu enable
++	u8	mdata;//more data bit
++	u8	pctrl;//per packet txdesc control enable
++	u8	triggered;//for ap mode handling Power Saving sta
++	u8	qsel;
++	u8	eosp;
++	u8	rate;
++	u8	intel_proxim;
++	u8 	retry_ctrl;
++	struct sta_info * psta;
++#ifdef CONFIG_TCP_CSUM_OFFLOAD_TX
++	u8	hw_tcp_csum;
++#endif
++	union Keytype	dot11tkiptxmickey;
++	//union Keytype	dot11tkiprxmickey;
++	union Keytype	dot118021x_UncstKey;
++};
++#endif
++
++#ifdef PLATFORM_FREEBSD
++#define ETH_ALEN	6		/* Octets in one ethernet addr	 */
++#define ETH_HLEN	14		/* Total octets in header.	 */
++#define ETH_P_IP	0x0800		/* Internet Protocol packet	*/
++
++/*struct rtw_ieee80211_hdr {
++	uint16_t frame_control;
++	uint16_t duration_id;
++	u8 addr1[6];
++	u8 addr2[6];
++	u8 addr3[6];
++	uint16_t seq_ctrl;
++	u8 addr4[6];
++} ;*/
++#endif //PLATFORM_FREEBSD
++
++#define WLANHDR_OFFSET	64
++
++#define NULL_FRAMETAG		(0x0)
++#define DATA_FRAMETAG		0x01
++#define L2_FRAMETAG		0x02
++#define MGNT_FRAMETAG		0x03
++#define AMSDU_FRAMETAG	0x04
++
++#define EII_FRAMETAG		0x05
++#define IEEE8023_FRAMETAG  0x06
++
++#define MP_FRAMETAG		0x07
++
++#define TXAGG_FRAMETAG 	0x08
++
++struct  submit_ctx{
++	u32 submit_time; /* */
++	u32 timeout_ms; /* <0: not synchronous, 0: wait forever, >0: up to ms waiting */
++	int status; /* status for operation */
++#ifdef PLATFORM_LINUX
++	struct completion done;
++#endif
++};
++
++enum {
++	RTW_SCTX_SUBMITTED = -1,
++	RTW_SCTX_DONE_SUCCESS = 0,
++	RTW_SCTX_DONE_UNKNOWN,
++	RTW_SCTX_DONE_TIMEOUT,
++	RTW_SCTX_DONE_BUF_ALLOC,
++	RTW_SCTX_DONE_BUF_FREE,
++	RTW_SCTX_DONE_WRITE_PORT_ERR,
++	RTW_SCTX_DONE_TX_DESC_NA,
++	RTW_SCTX_DONE_TX_DENY,
++	RTW_SCTX_DONE_CCX_PKT_FAIL,
++	RTW_SCTX_DONE_DRV_STOP,
++	RTW_SCTX_DONE_DEV_REMOVE,
++};
++
++
++void rtw_sctx_init(struct submit_ctx *sctx, int timeout_ms);
++int rtw_sctx_wait(struct submit_ctx *sctx);
++void rtw_sctx_done_err(struct submit_ctx **sctx, int status);
++void rtw_sctx_done(struct submit_ctx **sctx);
++
++struct xmit_buf
++{
++	_list	list;
++
++	_adapter *padapter;
++
++	u8 *pallocated_buf;
++
++	u8 *pbuf;
++
++	void *priv_data;
++
++	u16 ext_tag; // 0: Normal xmitbuf, 1: extension xmitbuf.
++	u16 flags;
++	u32 alloc_sz;
++
++	struct submit_ctx *sctx;
++
++#ifdef CONFIG_USB_HCI
++
++	u32 sz[8];
++
++#if defined(PLATFORM_OS_XP)||defined(PLATFORM_LINUX) || defined(PLATFORM_FREEBSD)
++	PURB	pxmit_urb[8];
++	dma_addr_t dma_transfer_addr;	/* (in) dma addr for transfer_buffer */
++#endif
++
++#ifdef PLATFORM_OS_XP
++	PIRP		pxmit_irp[8];
++#endif
++
++#ifdef PLATFORM_OS_CE
++	USB_TRANSFER	usb_transfer_write_port;
++#endif
++
++	u8 bpending[8];
++
++	sint last[8];
++
++#endif
++
++#ifdef CONFIG_SDIO_HCI
++	u32  len;
++	u8 *phead;
++	u8 *pdata;
++	u8 *ptail;
++	u8 *pend;
++	u32 ff_hwaddr;
++#ifdef PLATFORM_OS_XP
++	PMDL pxmitbuf_mdl;
++	PIRP  pxmitbuf_irp;
++	PSDBUS_REQUEST_PACKET pxmitbuf_sdrp;
++#endif
++#endif
++
++#ifdef CONFIG_PCI_HCI
++	u32  len;
++#endif
++
++#ifdef DBG_XMIT_BUF
++	u8 no;
++#endif
++
++};
++
++struct xmit_frame
++{
++	_list	list;
++
++	struct pkt_attrib attrib;
++
++	_pkt *pkt;
++
++	int	frame_tag;
++
++	_adapter *padapter;
++
++	u8	*buf_addr;
++
++	struct xmit_buf *pxmitbuf;
++
++#ifdef CONFIG_SDIO_HCI
++	u8	pg_num;
++	u8	agg_num;
++#endif
++
++#ifdef CONFIG_USB_HCI
++#ifdef CONFIG_USB_TX_AGGREGATION
++	u8	agg_num;
++#endif
++	u8	pkt_offset;
++#ifdef CONFIG_RTL8192D
++	u8	EMPktNum;
++	u16	EMPktLen[5];//The max value by HW
++#endif
++#endif
++#ifdef CONFIG_XMIT_ACK
++	u8 ack_report;
++#endif
++
++	u8 *alloc_addr; /* the actual address this xmitframe allocated */
++	u8 ext_tag; /* 0:data, 1:mgmt */
++
++};
++
++struct tx_servq {
++	_list	tx_pending;
++	_queue	sta_pending;
++	int qcnt;
++};
++
++
++
++struct sta_xmit_priv
++{
++	_lock	lock;
++	sint	option;
++	sint	apsd_setting;	//When bit mask is on, the associated edca queue supports APSD.
++
++
++	//struct tx_servq blk_q[MAX_NUMBLKS];
++	struct tx_servq	be_q;			//priority == 0,3
++	struct tx_servq	bk_q;			//priority == 1,2
++	struct tx_servq	vi_q;			//priority == 4,5
++	struct tx_servq	vo_q;			//priority == 6,7
++	_list 	legacy_dz;
++	_list  apsd;
++
++	u16 txseq_tid[16];
++
++	//uint	sta_tx_bytes;
++	//u64	sta_tx_pkts;
++	//uint	sta_tx_fail;
++
++};
++
++
++struct	hw_txqueue	{
++	volatile sint	head;
++	volatile sint	tail;
++	volatile sint 	free_sz;	//in units of 64 bytes
++	volatile sint      free_cmdsz;
++	volatile sint	 txsz[8];
++	uint	ff_hwaddr;
++	uint	cmd_hwaddr;
++	sint	ac_tag;
++};
++
++
++struct	xmit_priv	{
++
++	_lock	lock;
++
++	_sema	xmit_sema;
++	_sema	terminate_xmitthread_sema;
++
++	//_queue	blk_strms[MAX_NUMBLKS];
++	_queue	be_pending;
++	_queue	bk_pending;
++	_queue	vi_pending;
++	_queue	vo_pending;
++	_queue	bm_pending;
++
++	//_queue	legacy_dz_queue;
++	//_queue	apsd_queue;
++
++	u8 *pallocated_frame_buf;
++	u8 *pxmit_frame_buf;
++	uint free_xmitframe_cnt;
++	_queue	free_xmit_queue;
++
++	//uint mapping_addr;
++	//uint pkt_sz;
++
++	u8 *xframe_ext_alloc_addr;
++	u8 *xframe_ext;
++	uint free_xframe_ext_cnt;
++	_queue free_xframe_ext_queue;
++
++	//struct	hw_txqueue	be_txqueue;
++	//struct	hw_txqueue	bk_txqueue;
++	//struct	hw_txqueue	vi_txqueue;
++	//struct	hw_txqueue	vo_txqueue;
++	//struct	hw_txqueue	bmc_txqueue;
++
++	uint	frag_len;
++
++	_adapter	*adapter;
++
++	u8   vcs_setting;
++	u8	vcs;
++	u8	vcs_type;
++	//u16  rts_thresh;
++
++	u64	tx_bytes;
++	u64	tx_pkts;
++	u64	tx_drop;
++	u64	last_tx_bytes;
++	u64	last_tx_pkts;
++
++	struct hw_xmit *hwxmits;
++	u8	hwxmit_entry;
++
++#ifdef CONFIG_USB_HCI
++	_sema	tx_retevt;//all tx return event;
++	u8		txirp_cnt;//
++
++#ifdef PLATFORM_OS_CE
++	USB_TRANSFER	usb_transfer_write_port;
++//	USB_TRANSFER	usb_transfer_write_mem;
++#endif
++#ifdef PLATFORM_LINUX
++	struct tasklet_struct xmit_tasklet;
++#endif
++#ifdef PLATFORM_FREEBSD
++	struct task xmit_tasklet;
++#endif
++	//per AC pending irp
++	int beq_cnt;
++	int bkq_cnt;
++	int viq_cnt;
++	int voq_cnt;
++
++#endif
++
++#ifdef CONFIG_PCI_HCI
++	// Tx
++	struct rtw_tx_ring	tx_ring[PCI_MAX_TX_QUEUE_COUNT];
++	int	txringcount[PCI_MAX_TX_QUEUE_COUNT];
++#ifdef PLATFORM_LINUX
++	struct tasklet_struct xmit_tasklet;
++#endif
++#endif
++
++	_queue free_xmitbuf_queue;
++	_queue pending_xmitbuf_queue;
++	u8 *pallocated_xmitbuf;
++	u8 *pxmitbuf;
++	uint free_xmitbuf_cnt;
++
++	_queue free_xmit_extbuf_queue;
++	u8 *pallocated_xmit_extbuf;
++	u8 *pxmit_extbuf;
++	uint free_xmit_extbuf_cnt;
++
++	u16	nqos_ssn;
++
++#ifdef CONFIG_XMIT_ACK
++	int	ack_tx;
++	_mutex ack_tx_mutex;
++	struct submit_ctx ack_tx_ops;
++#endif
++	_lock lock_sctx;
++};
++
++extern struct xmit_buf *rtw_alloc_xmitbuf_ext(struct xmit_priv *pxmitpriv);
++extern s32 rtw_free_xmitbuf_ext(struct xmit_priv *pxmitpriv, struct xmit_buf *pxmitbuf);
++
++extern struct xmit_buf *rtw_alloc_xmitbuf(struct xmit_priv *pxmitpriv);
++extern s32 rtw_free_xmitbuf(struct xmit_priv *pxmitpriv, struct xmit_buf *pxmitbuf);
++
++void rtw_count_tx_stats(_adapter *padapter, struct xmit_frame *pxmitframe, int sz);
++extern void rtw_update_protection(_adapter *padapter, u8 *ie, uint ie_len);
++extern s32 rtw_make_wlanhdr(_adapter *padapter, u8 *hdr, struct pkt_attrib *pattrib);
++extern s32 rtw_put_snap(u8 *data, u16 h_proto);
++
++extern struct xmit_frame *rtw_alloc_xmitframe(struct xmit_priv *pxmitpriv);
++struct xmit_frame *rtw_alloc_xmitframe_ext(struct xmit_priv *pxmitpriv);
++struct xmit_frame *rtw_alloc_xmitframe_once(struct xmit_priv *pxmitpriv);
++extern s32 rtw_free_xmitframe(struct xmit_priv *pxmitpriv, struct xmit_frame *pxmitframe);
++extern void rtw_free_xmitframe_queue(struct xmit_priv *pxmitpriv, _queue *pframequeue);
++struct tx_servq *rtw_get_sta_pending(_adapter *padapter, struct sta_info *psta, sint up, u8 *ac);
++extern s32 rtw_xmitframe_enqueue(_adapter *padapter, struct xmit_frame *pxmitframe);
++extern struct xmit_frame* rtw_dequeue_xframe(struct xmit_priv *pxmitpriv, struct hw_xmit *phwxmit_i, sint entry);
++
++extern s32 rtw_xmit_classifier(_adapter *padapter, struct xmit_frame *pxmitframe);
++extern thread_return rtw_xmit_thread(thread_context context);
++extern u32 rtw_calculate_wlan_pkt_size_by_attribue(struct pkt_attrib *pattrib);
++#define rtw_wlan_pkt_size(f) rtw_calculate_wlan_pkt_size_by_attribue(&f->attrib)
++extern s32 rtw_xmitframe_coalesce(_adapter *padapter, _pkt *pkt, struct xmit_frame *pxmitframe);
++#ifdef CONFIG_IEEE80211W
++extern s32 rtw_mgmt_xmitframe_coalesce(_adapter *padapter, _pkt *pkt, struct xmit_frame *pxmitframe);
++#endif //CONFIG_IEEE80211W
++#ifdef CONFIG_TDLS
++s32 rtw_xmit_tdls_coalesce(_adapter *padapter, struct xmit_frame *pxmitframe, u8 action);
++#endif //CONFIG_TDLS
++s32 _rtw_init_hw_txqueue(struct hw_txqueue* phw_txqueue, u8 ac_tag);
++void _rtw_init_sta_xmit_priv(struct sta_xmit_priv *psta_xmitpriv);
++
++
++s32 rtw_txframes_pending(_adapter *padapter);
++s32 rtw_txframes_sta_ac_pending(_adapter *padapter, struct pkt_attrib *pattrib);
++void rtw_init_hwxmits(struct hw_xmit *phwxmit, sint entry);
++
++
++s32 _rtw_init_xmit_priv(struct xmit_priv *pxmitpriv, _adapter *padapter);
++void _rtw_free_xmit_priv (struct xmit_priv *pxmitpriv);
++
++
++void rtw_alloc_hwxmits(_adapter *padapter);
++void rtw_free_hwxmits(_adapter *padapter);
++
++
++s32 rtw_xmit(_adapter *padapter, _pkt **pkt);
++
++#if defined(CONFIG_AP_MODE) || defined(CONFIG_TDLS)
++sint xmitframe_enqueue_for_sleeping_sta(_adapter *padapter, struct xmit_frame *pxmitframe);
++void stop_sta_xmit(_adapter *padapter, struct sta_info *psta);
++void wakeup_sta_to_xmit(_adapter *padapter, struct sta_info *psta);
++void xmit_delivery_enabled_frames(_adapter *padapter, struct sta_info *psta);
++#endif
++
++u8	qos_acm(u8 acm_mask, u8 priority);
++
++#ifdef CONFIG_XMIT_ACK
++int rtw_ack_tx_wait(struct xmit_priv *pxmitpriv, u32 timeout_ms);
++void rtw_ack_tx_done(struct xmit_priv *pxmitpriv, int status);
++#endif //CONFIG_XMIT_ACK
++
++
++//include after declaring struct xmit_buf, in order to avoid warning
++#include <xmit_osdep.h>
++
++#endif	//_RTL871X_XMIT_H_
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/sta_info.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/sta_info.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/sta_info.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/sta_info.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,432 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __STA_INFO_H_
++#define __STA_INFO_H_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <wifi.h>
++
++#define IBSS_START_MAC_ID	2
++#define NUM_STA 32
++#define NUM_ACL 16
++
++
++//if mode ==0, then the sta is allowed once the addr is hit.
++//if mode ==1, then the sta is rejected once the addr is non-hit.
++struct rtw_wlan_acl_node {
++        _list		        list;
++        u8       addr[ETH_ALEN];
++        u8       valid;
++};
++
++//mode=0, disable
++//mode=1, accept unless in deny list
++//mode=2, deny unless in accept list
++struct wlan_acl_pool {
++	int mode;
++	int num;
++	struct rtw_wlan_acl_node aclnode[NUM_ACL];
++	_queue	acl_node_q;
++};
++
++typedef struct _RSSI_STA{
++	s32	UndecoratedSmoothedPWDB;
++	s32	UndecoratedSmoothedCCK;
++	s32	UndecoratedSmoothedOFDM;
++	u64	PacketMap;
++	u8	ValidBit;
++}RSSI_STA, *PRSSI_STA;
++
++struct	stainfo_stats	{
++
++	u64 rx_mgnt_pkts;
++		u64 rx_beacon_pkts;
++		u64 rx_probereq_pkts;
++		u64 rx_probersp_pkts;
++		u64 rx_probersp_bm_pkts;
++		u64 rx_probersp_uo_pkts;
++	u64 rx_ctrl_pkts;
++	u64 rx_data_pkts;
++
++	u64	last_rx_mgnt_pkts;
++		u64 last_rx_beacon_pkts;
++		u64 last_rx_probereq_pkts;
++		u64 last_rx_probersp_pkts;
++		u64 last_rx_probersp_bm_pkts;
++		u64 last_rx_probersp_uo_pkts;
++	u64	last_rx_ctrl_pkts;
++	u64	last_rx_data_pkts;
++	
++	u64	rx_bytes;
++	u64	rx_drops;
++
++	u64	tx_pkts;
++	u64	tx_bytes;
++	u64  tx_drops;
++
++};
++
++#ifdef CONFIG_TDLS
++struct TDLS_PeerKey {
++	u8 kck[16]; /* TPK-KCK */
++	u8 tk[16]; /* TPK-TK; only CCMP will be used */
++} ;
++#endif //CONFIG_TDLS
++
++struct sta_info {
++
++	_lock	lock;
++	_list	list; //free_sta_queue
++	_list	hash_list; //sta_hash
++	//_list asoc_list; //20061114
++	//_list sleep_list;//sleep_q
++	//_list wakeup_list;//wakeup_q
++	
++	struct sta_xmit_priv sta_xmitpriv;
++	struct sta_recv_priv sta_recvpriv;
++	
++	_queue sleep_q;
++	unsigned int sleepq_len;
++	
++	uint state;
++	uint aid;
++	uint mac_id;
++	uint qos_option;
++	u8	hwaddr[ETH_ALEN];
++
++	uint	ieee8021x_blocked;	//0: allowed, 1:blocked 
++	uint	dot118021XPrivacy; //aes, tkip...
++	union Keytype	dot11tkiptxmickey;
++	union Keytype	dot11tkiprxmickey;
++	union Keytype	dot118021x_UncstKey;	
++	union pn48		dot11txpn;			// PN48 used for Unicast xmit.
++#ifdef CONFIG_IEEE80211W
++	union pn48		dot11wtxpn;			// PN48 used for Unicast mgmt xmit.
++#endif //CONFIG_IEEE80211W
++	union pn48		dot11rxpn;			// PN48 used for Unicast recv.
++
++
++	u8	bssrateset[16];
++	u32	bssratelen;
++	s32  rssi;
++	s32	signal_quality;
++	
++	u8	cts2self;
++	u8	rtsen;
++
++	u8	raid;
++	u8 	init_rate;
++	u32	ra_mask;
++	struct stainfo_stats sta_stats;
++
++#ifdef CONFIG_TDLS
++	u32	tdls_sta_state;
++	u8	dialog;
++	u8	SNonce[32];
++	u8	ANonce[32];
++	u32	TDLS_PeerKey_Lifetime;
++	u16	TPK_count;
++	_timer	TPK_timer;
++	struct TDLS_PeerKey	tpk;
++	_adapter *padapter;
++	u16	stat_code;
++	u8	off_ch;
++	u16	ch_switch_time;
++	u16	ch_switch_timeout;
++	u8	option;
++	_timer	option_timer;
++	_timer	base_ch_timer;
++	_timer	off_ch_timer;
++
++	_timer handshake_timer;
++	_timer alive_timer1;
++	_timer alive_timer2;
++	u8 timer_flag;
++	u8 alive_count;
++#endif //CONFIG_TDLS
++
++	//for A-MPDU TX, ADDBA timeout check	
++	_timer addba_retry_timer;
++	
++	//for A-MPDU Rx reordering buffer control 
++	struct recv_reorder_ctrl recvreorder_ctrl[16];
++
++	//for A-MPDU Tx
++	//unsigned char		ampdu_txen_bitmap;
++	u16	BA_starting_seqctrl[16];
++	
++
++#ifdef CONFIG_80211N_HT
++	struct ht_priv	htpriv;	
++#endif
++	
++	//Notes:	
++	//STA_Mode:
++	//curr_network(mlme_priv/security_priv/qos/ht) + sta_info: (STA & AP) CAP/INFO	
++	//scan_q: AP CAP/INFO
++
++	//AP_Mode:
++	//curr_network(mlme_priv/security_priv/qos/ht) : AP CAP/INFO
++	//sta_info: (AP & STA) CAP/INFO
++		
++#ifdef CONFIG_AP_MODE
++
++	_list asoc_list;
++	_list auth_list;
++	 
++	unsigned int expire_to;
++	unsigned int auth_seq;
++	unsigned int authalg;
++	unsigned char chg_txt[128];
++
++	u16 capability;	
++	int flags;	
++
++	int dot8021xalg;//0:disable, 1:psk, 2:802.1x
++	int wpa_psk;//0:disable, bit(0): WPA, bit(1):WPA2
++	int wpa_group_cipher;
++	int wpa2_group_cipher;
++	int wpa_pairwise_cipher;
++	int wpa2_pairwise_cipher;	
++
++	u8 bpairwise_key_installed;
++
++#ifdef CONFIG_NATIVEAP_MLME
++	u8 wpa_ie[32];
++
++	u8 nonerp_set;
++	u8 no_short_slot_time_set;
++	u8 no_short_preamble_set;
++	u8 no_ht_gf_set;
++	u8 no_ht_set;
++	u8 ht_20mhz_set;
++#endif	// CONFIG_NATIVEAP_MLME
++
++	unsigned int tx_ra_bitmap;
++	u8 qos_info;
++
++	u8 max_sp_len;
++	u8 uapsd_bk;//BIT(0): Delivery enabled, BIT(1): Trigger enabled
++	u8 uapsd_be;
++	u8 uapsd_vi;
++	u8 uapsd_vo;	
++
++	u8 has_legacy_ac;
++	unsigned int sleepq_ac_len;
++
++#ifdef CONFIG_P2P
++	//p2p priv data
++	u8 is_p2p_device;
++	u8 p2p_status_code;
++
++	//p2p client info
++	u8 dev_addr[ETH_ALEN];
++	//u8 iface_addr[ETH_ALEN];//= hwaddr[ETH_ALEN]
++	u8 dev_cap;
++	u16 config_methods;
++	u8 primary_dev_type[8];
++	u8 num_of_secdev_type;
++	u8 secdev_types_list[32];// 32/8 == 4;
++	u16 dev_name_len;
++	u8 dev_name[32];	
++#endif //CONFIG_P2P
++
++#ifdef CONFIG_TX_MCAST2UNI
++	u8 under_exist_checking;
++#endif	// CONFIG_TX_MCAST2UNI
++	
++	u8 keep_alive_trycnt;
++
++#endif	// CONFIG_AP_MODE	
++
++#ifdef CONFIG_IOCTL_CFG80211
++	u8 *passoc_req;
++	u32 assoc_req_len;
++#endif
++
++	//for DM
++	RSSI_STA	 rssi_stat;
++	
++        /* To store the sequence number of received management frame */
++	u16 RxMgmtFrameSeqNum;
++};
++
++#define sta_rx_pkts(sta) \
++	(sta->sta_stats.rx_mgnt_pkts \
++	+ sta->sta_stats.rx_ctrl_pkts \
++	+ sta->sta_stats.rx_data_pkts)
++
++#define sta_last_rx_pkts(sta) \
++	(sta->sta_stats.last_rx_mgnt_pkts \
++	+ sta->sta_stats.last_rx_ctrl_pkts \
++	+ sta->sta_stats.last_rx_data_pkts)
++
++#define sta_rx_data_pkts(sta) \
++	(sta->sta_stats.rx_data_pkts)
++
++#define sta_last_rx_data_pkts(sta) \
++	(sta->sta_stats.last_rx_data_pkts)
++
++#define sta_rx_mgnt_pkts(sta) \
++	(sta->sta_stats.rx_mgnt_pkts)
++
++#define sta_last_rx_mgnt_pkts(sta) \
++	(sta->sta_stats.last_rx_mgnt_pkts)
++
++#define sta_rx_beacon_pkts(sta) \
++	(sta->sta_stats.rx_beacon_pkts)
++
++#define sta_last_rx_beacon_pkts(sta) \
++	(sta->sta_stats.last_rx_beacon_pkts)
++
++#define sta_rx_probereq_pkts(sta) \
++	(sta->sta_stats.rx_probereq_pkts)
++
++#define sta_last_rx_probereq_pkts(sta) \
++	(sta->sta_stats.last_rx_probereq_pkts)
++
++#define sta_rx_probersp_pkts(sta) \
++	(sta->sta_stats.rx_probersp_pkts)
++
++#define sta_last_rx_probersp_pkts(sta) \
++	(sta->sta_stats.last_rx_probersp_pkts)
++
++#define sta_rx_probersp_bm_pkts(sta) \
++	(sta->sta_stats.rx_probersp_bm_pkts)
++
++#define sta_last_rx_probersp_bm_pkts(sta) \
++	(sta->sta_stats.last_rx_probersp_bm_pkts)
++
++#define sta_rx_probersp_uo_pkts(sta) \
++	(sta->sta_stats.rx_probersp_uo_pkts)
++
++#define sta_last_rx_probersp_uo_pkts(sta) \
++	(sta->sta_stats.last_rx_probersp_uo_pkts)
++
++#define sta_update_last_rx_pkts(sta) \
++	do { \
++		sta->sta_stats.last_rx_mgnt_pkts = sta->sta_stats.rx_mgnt_pkts; \
++		sta->sta_stats.last_rx_beacon_pkts = sta->sta_stats.rx_beacon_pkts; \
++		sta->sta_stats.last_rx_probereq_pkts = sta->sta_stats.rx_probereq_pkts; \
++		sta->sta_stats.last_rx_probersp_pkts = sta->sta_stats.rx_probersp_pkts; \
++		sta->sta_stats.last_rx_probersp_bm_pkts = sta->sta_stats.rx_probersp_bm_pkts; \
++		sta->sta_stats.last_rx_probersp_uo_pkts = sta->sta_stats.rx_probersp_uo_pkts; \
++		sta->sta_stats.last_rx_ctrl_pkts = sta->sta_stats.rx_ctrl_pkts; \
++		sta->sta_stats.last_rx_data_pkts = sta->sta_stats.rx_data_pkts; \
++	} while(0)
++
++#define STA_RX_PKTS_ARG(sta) \
++	sta->sta_stats.rx_mgnt_pkts \
++	, sta->sta_stats.rx_ctrl_pkts \
++	, sta->sta_stats.rx_data_pkts
++
++#define STA_LAST_RX_PKTS_ARG(sta) \
++	sta->sta_stats.last_rx_mgnt_pkts \
++	, sta->sta_stats.last_rx_ctrl_pkts \
++	, sta->sta_stats.last_rx_data_pkts
++
++#define STA_RX_PKTS_DIFF_ARG(sta) \
++	sta->sta_stats.rx_mgnt_pkts - sta->sta_stats.last_rx_mgnt_pkts \
++	, sta->sta_stats.rx_ctrl_pkts - sta->sta_stats.last_rx_ctrl_pkts \
++	, sta->sta_stats.rx_data_pkts -sta->sta_stats.last_rx_data_pkts
++
++#define STA_PKTS_FMT "(m:%llu, c:%llu, d:%llu)"
++	
++struct	sta_priv {
++	
++	u8 *pallocated_stainfo_buf;
++	u8 *pstainfo_buf;
++	_queue	free_sta_queue;
++	
++	_lock sta_hash_lock;
++	_list   sta_hash[NUM_STA];
++	int asoc_sta_count;
++	_queue sleep_q;
++	_queue wakeup_q;
++	
++	_adapter *padapter;
++	
++
++#ifdef CONFIG_AP_MODE
++	_list asoc_list;
++	_list auth_list;
++	_lock asoc_list_lock;
++	_lock auth_list_lock;
++	u8 asoc_list_cnt;
++	u8 auth_list_cnt;
++
++	unsigned int auth_to;  //sec, time to expire in authenticating.
++	unsigned int assoc_to; //sec, time to expire before associating.
++	unsigned int expire_to; //sec , time to expire after associated.
++	
++	/* pointers to STA info; based on allocated AID or NULL if AID free
++	 * AID is in the range 1-2007, so sta_aid[0] corresponders to AID 1
++	 * and so on
++	 */
++	struct sta_info *sta_aid[NUM_STA];
++
++	u16 sta_dz_bitmap;//only support 15 stations, staion aid bitmap for sleeping sta.
++	u16 tim_bitmap;//only support 15 stations, aid=0~15 mapping bit0~bit15	
++
++	u16 max_num_sta;
++
++	struct wlan_acl_pool acl_list;
++#endif		
++	
++};
++
++
++__inline static u32 wifi_mac_hash(u8 *mac)
++{
++        u32 x;
++
++        x = mac[0];
++        x = (x << 2) ^ mac[1];
++        x = (x << 2) ^ mac[2];
++        x = (x << 2) ^ mac[3];
++        x = (x << 2) ^ mac[4];
++        x = (x << 2) ^ mac[5];
++
++        x ^= x >> 8;
++        x  = x & (NUM_STA - 1);
++		
++        return x;
++}
++
++
++extern u32	_rtw_init_sta_priv(struct sta_priv *pstapriv);
++extern u32	_rtw_free_sta_priv(struct sta_priv *pstapriv);
++
++#define stainfo_offset_valid(offset) (offset < NUM_STA && offset >= 0)
++int rtw_stainfo_offset(struct sta_priv *stapriv, struct sta_info *sta);
++struct sta_info *rtw_get_stainfo_by_offset(struct sta_priv *stapriv, int offset);
++
++extern struct sta_info *rtw_alloc_stainfo(struct	sta_priv *pstapriv, u8 *hwaddr);
++extern u32	rtw_free_stainfo(_adapter *padapter , struct sta_info *psta);
++extern void rtw_free_all_stainfo(_adapter *padapter);
++extern struct sta_info *rtw_get_stainfo(struct sta_priv *pstapriv, u8 *hwaddr);
++extern u32 rtw_init_bcmc_stainfo(_adapter* padapter);
++extern struct sta_info* rtw_get_bcmc_stainfo(_adapter* padapter);
++extern u8 rtw_access_ctrl(_adapter *padapter, u8 *mac_addr);
++
++#endif //_STA_INFO_H_
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/usb_hal.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/usb_hal.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/usb_hal.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/usb_hal.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,37 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __USB_HAL_H__
++#define __USB_HAL_H__
++
++
++void rtl8192cu_set_hal_ops(_adapter * padapter);
++
++void rtl8192du_set_hal_ops(_adapter * padapter);
++#ifdef CONFIG_INTEL_PROXIM	
++extern _adapter  *rtw_usb_get_sw_pointer(void);
++#endif	//CONFIG_INTEL_PROXIM
++#ifdef CONFIG_WOWLAN
++#ifdef CONFIG_WOWLAN_MANUAL
++extern int rtw_suspend_toshiba(PADAPTER Adapter);
++extern int rtw_resume_toshiba(PADAPTER Adapter);
++#endif // CONFIG_WOWLAN_MANUAL
++#endif //CONFIG_WOWLAN
++#endif //__USB_HAL_H__
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/usb_ops.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/usb_ops.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/usb_ops.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/usb_ops.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,110 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __USB_OPS_H_
++#define __USB_OPS_H_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <osdep_intf.h>
++
++#define REALTEK_USB_VENQT_READ		0xC0
++#define REALTEK_USB_VENQT_WRITE		0x40
++#define REALTEK_USB_VENQT_CMD_REQ	0x05
++#define REALTEK_USB_VENQT_CMD_IDX	0x00
++
++enum{
++	VENDOR_WRITE = 0x00,
++	VENDOR_READ = 0x01,
++};
++#define ALIGNMENT_UNIT				16
++#define MAX_VENDOR_REQ_CMD_SIZE	254		//8188cu SIE Support
++#define MAX_USB_IO_CTL_SIZE		(MAX_VENDOR_REQ_CMD_SIZE +ALIGNMENT_UNIT)
++
++#ifdef PLATFORM_LINUX
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,12)) 
++#define rtw_usb_control_msg(dev, pipe, request, requesttype, value, index, data, size, timeout_ms) \
++	usb_control_msg((dev), (pipe), (request), (requesttype), (value), (index), (data), (size), (timeout_ms)) 
++#define rtw_usb_bulk_msg(usb_dev, pipe, data, len, actual_length, timeout_ms) \
++	usb_bulk_msg((usb_dev), (pipe), (data), (len), (actual_length), (timeout_ms))
++#else
++#define rtw_usb_control_msg(dev, pipe, request, requesttype, value, index, data, size,timeout_ms) \
++	usb_control_msg((dev), (pipe), (request), (requesttype), (value), (index), (data), (size), \
++		((timeout_ms) == 0) ||((timeout_ms)*HZ/1000>0)?((timeout_ms)*HZ/1000):1) 
++#define rtw_usb_bulk_msg(usb_dev, pipe, data, len, actual_length, timeout_ms) \
++	usb_bulk_msg((usb_dev), (pipe), (data), (len), (actual_length), \
++		((timeout_ms) == 0) ||((timeout_ms)*HZ/1000>0)?((timeout_ms)*HZ/1000):1) 
++#endif
++#include <usb_ops_linux.h>
++#endif //PLATFORM_LINUX
++
++#ifdef CONFIG_RTL8192C
++void rtl8192cu_set_intf_ops(struct _io_ops *pops);
++#define usb_set_intf_ops	rtl8192cu_set_intf_ops
++
++void rtl8192cu_recv_tasklet(void *priv);
++
++void rtl8192cu_xmit_tasklet(void *priv);
++#endif
++
++#ifdef CONFIG_RTL8192D
++void rtl8192du_set_intf_ops(struct _io_ops *pops);
++#define usb_set_intf_ops	rtl8192du_set_intf_ops
++
++#ifndef PLATFORM_FREEBSD
++void rtl8192du_recv_tasklet(void *priv);
++#else	// PLATFORM_FREEBSD
++void rtl8192du_recv_tasklet(void *priv, int npending);
++#ifdef CONFIG_RX_INDICATE_QUEUE
++void rtw_rx_indicate_tasklet(void *priv, int npending);
++#endif	// CONFIG_RX_INDICATE_QUEUE
++#endif	// PLATFORM_FREEBSD
++
++void rtl8192du_xmit_tasklet(void *priv);
++#endif
++
++/*
++* Increase and check if the continual_urb_error of this @param dvobjprive is larger than MAX_CONTINUAL_URB_ERR
++* @return _TRUE:
++* @return _FALSE:
++*/
++static inline int rtw_inc_and_chk_continual_urb_error(struct dvobj_priv *dvobj)
++{
++	int ret = _FALSE;
++	int value;
++	if( (value=ATOMIC_INC_RETURN(&dvobj->continual_urb_error)) > MAX_CONTINUAL_URB_ERR) {
++		DBG_871X("[dvobj:%p][ERROR] continual_urb_error:%d > %d\n", dvobj, value, MAX_CONTINUAL_URB_ERR);
++		ret = _TRUE;
++	} else {
++		//DBG_871X("[dvobj:%p] continual_urb_error:%d\n", dvobj, value);
++	}
++	return ret;
++}
++
++/*
++* Set the continual_urb_error of this @param dvobjprive to 0
++*/
++static inline void rtw_reset_continual_urb_error(struct dvobj_priv *dvobj)
++{
++	ATOMIC_SET(&dvobj->continual_urb_error, 0);	
++}
++
++#endif //__USB_OPS_H_
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/usb_ops_linux.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/usb_ops_linux.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/usb_ops_linux.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/usb_ops_linux.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,63 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __USB_OPS_LINUX_H__
++#define __USB_OPS_LINUX_H__
++
++#define VENDOR_CMD_MAX_DATA_LEN	254
++
++#define RTW_USB_CONTROL_MSG_TIMEOUT_TEST	10//ms
++#define RTW_USB_CONTROL_MSG_TIMEOUT	500//ms
++
++#if defined(CONFIG_VENDOR_REQ_RETRY) && defined(CONFIG_USB_VENDOR_REQ_MUTEX)
++/* vendor req retry should be in the situation when each vendor req is atomically submitted from others */
++#define MAX_USBCTRL_VENDORREQ_TIMES	10
++#else
++#define MAX_USBCTRL_VENDORREQ_TIMES	1
++#endif
++
++#define RTW_USB_BULKOUT_TIMEOUT	5000//ms
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)) || (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18))
++#define _usbctrl_vendorreq_async_callback(urb, regs)	_usbctrl_vendorreq_async_callback(urb)
++#define usb_bulkout_zero_complete(purb, regs)	usb_bulkout_zero_complete(purb)
++#define usb_write_mem_complete(purb, regs)	usb_write_mem_complete(purb)
++#define usb_write_port_complete(purb, regs)	usb_write_port_complete(purb)
++#define usb_read_port_complete(purb, regs)	usb_read_port_complete(purb)
++#define usb_read_interrupt_complete(purb, regs)	usb_read_interrupt_complete(purb)
++#endif
++
++#ifdef CONFIG_USB_SUPPORT_ASYNC_VDN_REQ
++int usb_async_write8(struct intf_hdl *pintfhdl, u32 addr, u8 val);
++int usb_async_write16(struct intf_hdl *pintfhdl, u32 addr, u16 val);
++int usb_async_write32(struct intf_hdl *pintfhdl, u32 addr, u32 val);
++#endif /* CONFIG_USB_SUPPORT_ASYNC_VDN_REQ */
++
++unsigned int ffaddr2pipehdl(struct dvobj_priv *pdvobj, u32 addr);
++
++void usb_read_mem(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *rmem);
++void usb_write_mem(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *wmem);
++
++void usb_read_port_cancel(struct intf_hdl *pintfhdl);
++
++u32 usb_write_port(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *wmem);
++void usb_write_port_cancel(struct intf_hdl *pintfhdl);
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/usb_osintf.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/usb_osintf.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/usb_osintf.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/usb_osintf.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,38 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __USB_OSINTF_H
++#define __USB_OSINTF_H
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <usb_vendor_req.h>
++
++#define USBD_HALTED(Status) ((ULONG)(Status) >> 30 == 3)
++
++
++//uint usb_dvobj_init(_adapter * adapter);
++//void usb_dvobj_deinit(_adapter * adapter);
++
++u8 usbvendorrequest(struct dvobj_priv *pdvobjpriv, RT_USB_BREQUEST brequest, RT_USB_WVALUE wvalue, u8 windex, void* data, u8 datalen, u8 isdirectionin);
++
++
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/usb_vendor_req.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/usb_vendor_req.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/usb_vendor_req.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/usb_vendor_req.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,59 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef _USB_VENDOR_REQUEST_H_
++#define _USB_VENDOR_REQUEST_H_
++
++//4	Set/Get Register related wIndex/Data
++#define	RT_USB_RESET_MASK_OFF		0
++#define	RT_USB_RESET_MASK_ON		1
++#define	RT_USB_SLEEP_MASK_OFF		0
++#define	RT_USB_SLEEP_MASK_ON		1
++#define	RT_USB_LDO_ON				1
++#define	RT_USB_LDO_OFF				0
++
++//4	Set/Get SYSCLK related	wValue or Data
++#define	RT_USB_SYSCLK_32KHZ		0
++#define	RT_USB_SYSCLK_40MHZ		1
++#define	RT_USB_SYSCLK_60MHZ		2
++
++
++typedef enum _RT_USB_BREQUEST {
++	RT_USB_SET_REGISTER		= 1,
++	RT_USB_SET_SYSCLK		= 2,
++	RT_USB_GET_SYSCLK		= 3,
++	RT_USB_GET_REGISTER		= 4
++} RT_USB_BREQUEST;
++
++
++typedef enum _RT_USB_WVALUE {
++	RT_USB_RESET_MASK	=	1,
++	RT_USB_SLEEP_MASK	=	2,
++	RT_USB_USB_HRCPWM	=	3,
++	RT_USB_LDO			=	4,
++	RT_USB_BOOT_TYPE	=	5
++} RT_USB_WVALUE;
++
++
++//BOOLEAN usbvendorrequest(PCE_USB_DEVICE	CEdevice, RT_USB_BREQUEST bRequest, RT_USB_WVALUE wValue, UCHAR wIndex, PVOID Data, UCHAR DataLength, BOOLEAN isDirectionIn);
++//BOOLEAN CEusbGetStatusRequest(PCE_USB_DEVICE CEdevice, IN USHORT Op, IN USHORT Index, PVOID Data);
++//BOOLEAN CEusbFeatureRequest(PCE_USB_DEVICE CEdevice, IN USHORT Op, IN USHORT FeatureSelector, IN USHORT Index);
++//BOOLEAN CEusbGetDescriptorRequest(PCE_USB_DEVICE CEdevice, IN short urbLength, IN UCHAR DescriptorType, IN UCHAR Index, IN USHORT LanguageId, IN PVOID  TransferBuffer, IN ULONG TransferBufferLength);
++
++#endif
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/wifi.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/wifi.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/wifi.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/wifi.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,1246 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef _WIFI_H_
++#define _WIFI_H_
++
++#include <rtw_byteorder.h>
++
++#ifdef BIT
++//#error	"BIT define occurred earlier elsewhere!\n"
++#undef BIT
++#endif
++#define BIT(x)	(1 << (x))
++
++
++#define WLAN_ETHHDR_LEN		14
++#define WLAN_ETHADDR_LEN	6
++#define WLAN_IEEE_OUI_LEN	3
++#define WLAN_ADDR_LEN		6
++#define WLAN_CRC_LEN		4
++#define WLAN_BSSID_LEN		6
++#define WLAN_BSS_TS_LEN		8
++#define WLAN_HDR_A3_LEN		24
++#define WLAN_HDR_A4_LEN		30
++#define WLAN_HDR_A3_QOS_LEN	26
++#define WLAN_HDR_A4_QOS_LEN	32
++#define WLAN_SSID_MAXLEN	32
++#define WLAN_DATA_MAXLEN	2312
++
++#define WLAN_A3_PN_OFFSET	24
++#define WLAN_A4_PN_OFFSET	30
++
++#define WLAN_MIN_ETHFRM_LEN	60
++#define WLAN_MAX_ETHFRM_LEN	1514
++#define WLAN_ETHHDR_LEN		14
++
++#define P80211CAPTURE_VERSION	0x80211001
++
++#ifdef GREEN_HILL
++#pragma pack(1)
++#endif
++
++enum WIFI_FRAME_TYPE {
++	WIFI_MGT_TYPE  =	(0),
++	WIFI_CTRL_TYPE =	(BIT(2)),
++	WIFI_DATA_TYPE =	(BIT(3)),
++	WIFI_QOS_DATA_TYPE	= (BIT(7)|BIT(3)),	//!< QoS Data	
++};
++
++enum WIFI_FRAME_SUBTYPE {
++
++    // below is for mgt frame
++    WIFI_ASSOCREQ       = (0 | WIFI_MGT_TYPE),
++    WIFI_ASSOCRSP       = (BIT(4) | WIFI_MGT_TYPE),
++    WIFI_REASSOCREQ     = (BIT(5) | WIFI_MGT_TYPE),
++    WIFI_REASSOCRSP     = (BIT(5) | BIT(4) | WIFI_MGT_TYPE),
++    WIFI_PROBEREQ       = (BIT(6) | WIFI_MGT_TYPE),
++    WIFI_PROBERSP       = (BIT(6) | BIT(4) | WIFI_MGT_TYPE),
++    WIFI_BEACON         = (BIT(7) | WIFI_MGT_TYPE),
++    WIFI_ATIM           = (BIT(7) | BIT(4) | WIFI_MGT_TYPE),
++    WIFI_DISASSOC       = (BIT(7) | BIT(5) | WIFI_MGT_TYPE),
++    WIFI_AUTH           = (BIT(7) | BIT(5) | BIT(4) | WIFI_MGT_TYPE),
++    WIFI_DEAUTH         = (BIT(7) | BIT(6) | WIFI_MGT_TYPE),
++    WIFI_ACTION         = (BIT(7) | BIT(6) | BIT(4) | WIFI_MGT_TYPE),
++
++    // below is for control frame
++    WIFI_PSPOLL         = (BIT(7) | BIT(5) | WIFI_CTRL_TYPE),
++    WIFI_RTS            = (BIT(7) | BIT(5) | BIT(4) | WIFI_CTRL_TYPE),
++    WIFI_CTS            = (BIT(7) | BIT(6) | WIFI_CTRL_TYPE),
++    WIFI_ACK            = (BIT(7) | BIT(6) | BIT(4) | WIFI_CTRL_TYPE),
++    WIFI_CFEND          = (BIT(7) | BIT(6) | BIT(5) | WIFI_CTRL_TYPE),
++    WIFI_CFEND_CFACK    = (BIT(7) | BIT(6) | BIT(5) | BIT(4) | WIFI_CTRL_TYPE),
++
++    // below is for data frame
++    WIFI_DATA           = (0 | WIFI_DATA_TYPE),
++    WIFI_DATA_CFACK     = (BIT(4) | WIFI_DATA_TYPE),
++    WIFI_DATA_CFPOLL    = (BIT(5) | WIFI_DATA_TYPE),
++    WIFI_DATA_CFACKPOLL = (BIT(5) | BIT(4) | WIFI_DATA_TYPE),
++    WIFI_DATA_NULL      = (BIT(6) | WIFI_DATA_TYPE),
++    WIFI_CF_ACK         = (BIT(6) | BIT(4) | WIFI_DATA_TYPE),
++    WIFI_CF_POLL        = (BIT(6) | BIT(5) | WIFI_DATA_TYPE),
++    WIFI_CF_ACKPOLL     = (BIT(6) | BIT(5) | BIT(4) | WIFI_DATA_TYPE),
++    WIFI_QOS_DATA_NULL	= (BIT(6) | WIFI_QOS_DATA_TYPE),
++};
++
++enum WIFI_REASON_CODE	{
++	_RSON_RESERVED_					= 0,
++	_RSON_UNSPECIFIED_				= 1,
++	_RSON_AUTH_NO_LONGER_VALID_		= 2,
++	_RSON_DEAUTH_STA_LEAVING_		= 3,
++	_RSON_INACTIVITY_				= 4,
++	_RSON_UNABLE_HANDLE_			= 5,
++	_RSON_CLS2_						= 6,
++	_RSON_CLS3_						= 7,
++	_RSON_DISAOC_STA_LEAVING_		= 8,
++	_RSON_ASOC_NOT_AUTH_			= 9,
++
++	// WPA reason
++	_RSON_INVALID_IE_				= 13,
++	_RSON_MIC_FAILURE_				= 14,
++	_RSON_4WAY_HNDSHK_TIMEOUT_		= 15,
++	_RSON_GROUP_KEY_UPDATE_TIMEOUT_	= 16,
++	_RSON_DIFF_IE_					= 17,
++	_RSON_MLTCST_CIPHER_NOT_VALID_	= 18,
++	_RSON_UNICST_CIPHER_NOT_VALID_	= 19,
++	_RSON_AKMP_NOT_VALID_			= 20,
++	_RSON_UNSUPPORT_RSNE_VER_		= 21,
++	_RSON_INVALID_RSNE_CAP_			= 22,
++	_RSON_IEEE_802DOT1X_AUTH_FAIL_	= 23,
++
++	//belowing are Realtek definition
++	_RSON_PMK_NOT_AVAILABLE_		= 24,
++	_RSON_TDLS_TEAR_TOOFAR_			= 25,
++	_RSON_TDLS_TEAR_UN_RSN_			= 26,
++};
++
++/* Reason codes (IEEE 802.11-2007, 7.3.1.7, Table 7-22) */
++#if 0
++#define WLAN_REASON_UNSPECIFIED 1
++#define WLAN_REASON_PREV_AUTH_NOT_VALID 2
++#define WLAN_REASON_DEAUTH_LEAVING 3
++#define WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY 4
++#define WLAN_REASON_DISASSOC_AP_BUSY 5
++#define WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA 6
++#define WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA 7
++#define WLAN_REASON_DISASSOC_STA_HAS_LEFT 8
++#define WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH 9
++#endif
++/* IEEE 802.11h */
++#define WLAN_REASON_PWR_CAPABILITY_NOT_VALID 10
++#define WLAN_REASON_SUPPORTED_CHANNEL_NOT_VALID 11
++#if 0
++/* IEEE 802.11i */
++#define WLAN_REASON_INVALID_IE 13
++#define WLAN_REASON_MICHAEL_MIC_FAILURE 14
++#define WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT 15
++#define WLAN_REASON_GROUP_KEY_UPDATE_TIMEOUT 16
++#define WLAN_REASON_IE_IN_4WAY_DIFFERS 17
++#define WLAN_REASON_GROUP_CIPHER_NOT_VALID 18
++#define WLAN_REASON_PAIRWISE_CIPHER_NOT_VALID 19
++#define WLAN_REASON_AKMP_NOT_VALID 20
++#define WLAN_REASON_UNSUPPORTED_RSN_IE_VERSION 21
++#define WLAN_REASON_INVALID_RSN_IE_CAPAB 22
++#define WLAN_REASON_IEEE_802_1X_AUTH_FAILED 23
++#define WLAN_REASON_CIPHER_SUITE_REJECTED 24
++#endif
++
++enum WIFI_STATUS_CODE {
++	_STATS_SUCCESSFUL_			= 0,
++	_STATS_FAILURE_				= 1,
++	_STATS_CAP_FAIL_			= 10,
++	_STATS_NO_ASOC_				= 11,
++	_STATS_OTHER_				= 12,
++	_STATS_NO_SUPP_ALG_			= 13,
++	_STATS_OUT_OF_AUTH_SEQ_		= 14,
++	_STATS_CHALLENGE_FAIL_		= 15,
++	_STATS_AUTH_TIMEOUT_		= 16,
++	_STATS_UNABLE_HANDLE_STA_	= 17,
++	_STATS_RATE_FAIL_			= 18,
++};
++
++/* Status codes (IEEE 802.11-2007, 7.3.1.9, Table 7-23) */
++#if 0
++#define WLAN_STATUS_SUCCESS 0
++#define WLAN_STATUS_UNSPECIFIED_FAILURE 1
++#define WLAN_STATUS_CAPS_UNSUPPORTED 10
++#define WLAN_STATUS_REASSOC_NO_ASSOC 11
++#define WLAN_STATUS_ASSOC_DENIED_UNSPEC 12
++#define WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG 13
++#define WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION 14
++#define WLAN_STATUS_CHALLENGE_FAIL 15
++#define WLAN_STATUS_AUTH_TIMEOUT 16
++#define WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA 17
++#define WLAN_STATUS_ASSOC_DENIED_RATES 18
++#endif
++//entended 
++/* IEEE 802.11b */
++#define WLAN_STATUS_ASSOC_DENIED_NOSHORT 19
++#define WLAN_STATUS_ASSOC_DENIED_NOPBCC 20
++#define WLAN_STATUS_ASSOC_DENIED_NOAGILITY 21
++/* IEEE 802.11h */
++#define WLAN_STATUS_SPEC_MGMT_REQUIRED 22
++#define WLAN_STATUS_PWR_CAPABILITY_NOT_VALID 23
++#define WLAN_STATUS_SUPPORTED_CHANNEL_NOT_VALID 24
++/* IEEE 802.11g */
++#define WLAN_STATUS_ASSOC_DENIED_NO_SHORT_SLOT_TIME 25
++#define WLAN_STATUS_ASSOC_DENIED_NO_ER_PBCC 26
++#define WLAN_STATUS_ASSOC_DENIED_NO_DSSS_OFDM 27
++/* IEEE 802.11w */
++#define WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY 30
++#define WLAN_STATUS_ROBUST_MGMT_FRAME_POLICY_VIOLATION 31
++/* IEEE 802.11i */
++#define WLAN_STATUS_INVALID_IE 40
++#define WLAN_STATUS_GROUP_CIPHER_NOT_VALID 41
++#define WLAN_STATUS_PAIRWISE_CIPHER_NOT_VALID 42
++#define WLAN_STATUS_AKMP_NOT_VALID 43
++#define WLAN_STATUS_UNSUPPORTED_RSN_IE_VERSION 44
++#define WLAN_STATUS_INVALID_RSN_IE_CAPAB 45
++#define WLAN_STATUS_CIPHER_REJECTED_PER_POLICY 46
++#define WLAN_STATUS_TS_NOT_CREATED 47
++#define WLAN_STATUS_DIRECT_LINK_NOT_ALLOWED 48
++#define WLAN_STATUS_DEST_STA_NOT_PRESENT 49
++#define WLAN_STATUS_DEST_STA_NOT_QOS_STA 50
++#define WLAN_STATUS_ASSOC_DENIED_LISTEN_INT_TOO_LARGE 51
++/* IEEE 802.11r */
++#define WLAN_STATUS_INVALID_FT_ACTION_FRAME_COUNT 52
++#define WLAN_STATUS_INVALID_PMKID 53
++#define WLAN_STATUS_INVALID_MDIE 54
++#define WLAN_STATUS_INVALID_FTIE 55
++
++
++enum WIFI_REG_DOMAIN {
++	DOMAIN_FCC		= 1,
++	DOMAIN_IC		= 2,
++	DOMAIN_ETSI		= 3,
++	DOMAIN_SPAIN	= 4,
++	DOMAIN_FRANCE	= 5,
++	DOMAIN_MKK		= 6,
++	DOMAIN_ISRAEL	= 7,
++	DOMAIN_MKK1		= 8,
++	DOMAIN_MKK2		= 9,
++	DOMAIN_MKK3		= 10,
++	DOMAIN_MAX
++};
++
++#define _TO_DS_		BIT(8)
++#define _FROM_DS_	BIT(9)
++#define _MORE_FRAG_	BIT(10)
++#define _RETRY_		BIT(11)
++#define _PWRMGT_	BIT(12)
++#define _MORE_DATA_	BIT(13)
++#define _PRIVACY_	BIT(14)
++#define _ORDER_			BIT(15)
++
++#define SetToDs(pbuf)	\
++	do	{	\
++		*(unsigned short *)(pbuf) |= cpu_to_le16(_TO_DS_); \
++	} while(0)
++
++#define GetToDs(pbuf)	(((*(unsigned short *)(pbuf)) & le16_to_cpu(_TO_DS_)) != 0)
++
++#define ClearToDs(pbuf)	\
++	do	{	\
++		*(unsigned short *)(pbuf) &= (~cpu_to_le16(_TO_DS_)); \
++	} while(0)
++
++#define SetFrDs(pbuf)	\
++	do	{	\
++		*(unsigned short *)(pbuf) |= cpu_to_le16(_FROM_DS_); \
++	} while(0)
++
++#define GetFrDs(pbuf)	(((*(unsigned short *)(pbuf)) & le16_to_cpu(_FROM_DS_)) != 0)
++
++#define ClearFrDs(pbuf)	\
++	do	{	\
++		*(unsigned short *)(pbuf) &= (~cpu_to_le16(_FROM_DS_)); \
++	} while(0)
++
++#define get_tofr_ds(pframe)	((GetToDs(pframe) << 1) | GetFrDs(pframe))
++
++
++#define SetMFrag(pbuf)	\
++	do	{	\
++		*(unsigned short *)(pbuf) |= cpu_to_le16(_MORE_FRAG_); \
++	} while(0)
++
++#define GetMFrag(pbuf)	(((*(unsigned short *)(pbuf)) & le16_to_cpu(_MORE_FRAG_)) != 0)
++
++#define ClearMFrag(pbuf)	\
++	do	{	\
++		*(unsigned short *)(pbuf) &= (~cpu_to_le16(_MORE_FRAG_)); \
++	} while(0)
++
++#define SetRetry(pbuf)	\
++	do	{	\
++		*(unsigned short *)(pbuf) |= cpu_to_le16(_RETRY_); \
++	} while(0)
++
++#define GetRetry(pbuf)	(((*(unsigned short *)(pbuf)) & le16_to_cpu(_RETRY_)) != 0)
++
++#define ClearRetry(pbuf)	\
++	do	{	\
++		*(unsigned short *)(pbuf) &= (~cpu_to_le16(_RETRY_)); \
++	} while(0)
++
++#define SetPwrMgt(pbuf)	\
++	do	{	\
++		*(unsigned short *)(pbuf) |= cpu_to_le16(_PWRMGT_); \
++	} while(0)
++
++#define GetPwrMgt(pbuf)	(((*(unsigned short *)(pbuf)) & le16_to_cpu(_PWRMGT_)) != 0)
++
++#define ClearPwrMgt(pbuf)	\
++	do	{	\
++		*(unsigned short *)(pbuf) &= (~cpu_to_le16(_PWRMGT_)); \
++	} while(0)
++
++#define SetMData(pbuf)	\
++	do	{	\
++		*(unsigned short *)(pbuf) |= cpu_to_le16(_MORE_DATA_); \
++	} while(0)
++
++#define GetMData(pbuf)	(((*(unsigned short *)(pbuf)) & le16_to_cpu(_MORE_DATA_)) != 0)
++
++#define ClearMData(pbuf)	\
++	do	{	\
++		*(unsigned short *)(pbuf) &= (~cpu_to_le16(_MORE_DATA_)); \
++	} while(0)
++
++#define SetPrivacy(pbuf)	\
++	do	{	\
++		*(unsigned short *)(pbuf) |= cpu_to_le16(_PRIVACY_); \
++	} while(0)
++
++#define GetPrivacy(pbuf)	(((*(unsigned short *)(pbuf)) & le16_to_cpu(_PRIVACY_)) != 0)
++
++#define ClearPrivacy(pbuf)	\
++	do	{	\
++		*(unsigned short *)(pbuf) &= (~cpu_to_le16(_PRIVACY_)); \
++	} while(0)
++
++
++#define GetOrder(pbuf)	(((*(unsigned short *)(pbuf)) & le16_to_cpu(_ORDER_)) != 0)
++
++#define GetFrameType(pbuf)	(le16_to_cpu(*(unsigned short *)(pbuf)) & (BIT(3) | BIT(2)))
++
++#define SetFrameType(pbuf,type)	\
++	do { 	\
++		*(unsigned short *)(pbuf) &= __constant_cpu_to_le16(~(BIT(3) | BIT(2))); \
++		*(unsigned short *)(pbuf) |= __constant_cpu_to_le16(type); \
++	} while(0)
++
++#define GetFrameSubType(pbuf)	(cpu_to_le16(*(unsigned short *)(pbuf)) & (BIT(7) | BIT(6) | BIT(5) | BIT(4) | BIT(3) | BIT(2)))
++
++#define SetFrameSubType(pbuf,type) \
++	do {    \
++		*(unsigned short *)(pbuf) &= cpu_to_le16(~(BIT(7) | BIT(6) | BIT(5) | BIT(4) | BIT(3) | BIT(2))); \
++		*(unsigned short *)(pbuf) |= cpu_to_le16(type); \
++	} while(0)
++
++#define GetSequence(pbuf)	(cpu_to_le16(*(unsigned short *)((SIZE_PTR)(pbuf) + 22)) >> 4)
++
++#define GetFragNum(pbuf)	(cpu_to_le16(*(unsigned short *)((SIZE_PTR)(pbuf) + 22)) & 0x0f)
++
++#define GetTupleCache(pbuf)	(cpu_to_le16(*(unsigned short *)((SIZE_PTR)(pbuf) + 22)))
++
++#define SetFragNum(pbuf, num) \
++	do {    \
++		*(unsigned short *)((SIZE_PTR)(pbuf) + 22) = \
++			((*(unsigned short *)((SIZE_PTR)(pbuf) + 22)) & le16_to_cpu(~(0x000f))) | \
++			cpu_to_le16(0x0f & (num));     \
++	} while(0)
++
++#define SetSeqNum(pbuf, num) \
++	do {    \
++		*(unsigned short *)((SIZE_PTR)(pbuf) + 22) = \
++			((*(unsigned short *)((SIZE_PTR)(pbuf) + 22)) & le16_to_cpu((unsigned short)~0xfff0)) | \
++			le16_to_cpu((unsigned short)(0xfff0 & (num << 4))); \
++	} while(0)
++
++#define SetDuration(pbuf, dur) \
++	do {    \
++		*(unsigned short *)((SIZE_PTR)(pbuf) + 2) = cpu_to_le16(0xffff & (dur)); \
++	} while(0)
++
++
++#define SetPriority(pbuf, tid)	\
++	do	{	\
++		*(unsigned short *)(pbuf) |= cpu_to_le16(tid & 0xf); \
++	} while(0)
++
++#define GetPriority(pbuf)	((le16_to_cpu(*(unsigned short *)(pbuf))) & 0xf)
++
++#define SetEOSP(pbuf, eosp)	\
++	do	{	\
++		*(unsigned short *)(pbuf) |= cpu_to_le16( (eosp & 1) << 4); \
++	} while(0)
++
++#define SetAckpolicy(pbuf, ack)	\
++	do	{	\
++		*(unsigned short *)(pbuf) |= cpu_to_le16( (ack & 3) << 5); \
++	} while(0)
++
++#define GetAckpolicy(pbuf) (((le16_to_cpu(*(unsigned short *)pbuf)) >> 5) & 0x3)
++
++#define GetAMsdu(pbuf) (((le16_to_cpu(*(unsigned short *)pbuf)) >> 7) & 0x1)
++
++#define SetAMsdu(pbuf, amsdu)	\
++	do	{	\
++		*(unsigned short *)(pbuf) |= cpu_to_le16( (amsdu & 1) << 7); \
++	} while(0)	
++
++#define GetAid(pbuf)	(cpu_to_le16(*(unsigned short *)((SIZE_PTR)(pbuf) + 2)) & 0x3fff)
++
++#define GetTid(pbuf)	(cpu_to_le16(*(unsigned short *)((SIZE_PTR)(pbuf) + (((GetToDs(pbuf)<<1)|GetFrDs(pbuf))==3?30:24))) & 0x000f)
++
++#define GetAddr1Ptr(pbuf)	((unsigned char *)((SIZE_PTR)(pbuf) + 4))
++
++#define GetAddr2Ptr(pbuf)	((unsigned char *)((SIZE_PTR)(pbuf) + 10))
++
++#define GetAddr3Ptr(pbuf)	((unsigned char *)((SIZE_PTR)(pbuf) + 16))
++
++#define GetAddr4Ptr(pbuf)	((unsigned char *)((SIZE_PTR)(pbuf) + 24))
++
++#define MacAddr_isBcst(addr) \
++( \
++	( (addr[0] == 0xff) && (addr[1] == 0xff) && \
++		(addr[2] == 0xff) && (addr[3] == 0xff) && \
++		(addr[4] == 0xff) && (addr[5] == 0xff) )  ? _TRUE : _FALSE \
++)
++
++__inline static int IS_MCAST(unsigned char *da)
++{
++	if ((*da) & 0x01)
++		return _TRUE;
++	else
++		return _FALSE;
++}
++
++
++__inline static unsigned char * get_da(unsigned char *pframe)
++{
++	unsigned char 	*da;
++	unsigned int	to_fr_ds	= (GetToDs(pframe) << 1) | GetFrDs(pframe);
++
++	switch (to_fr_ds) {
++		case 0x00:	// ToDs=0, FromDs=0
++			da = GetAddr1Ptr(pframe);
++			break;
++		case 0x01:	// ToDs=0, FromDs=1
++			da = GetAddr1Ptr(pframe);
++			break;
++		case 0x02:	// ToDs=1, FromDs=0
++			da = GetAddr3Ptr(pframe);
++			break;
++		default:	// ToDs=1, FromDs=1
++			da = GetAddr3Ptr(pframe);
++			break;
++	}
++
++	return da;
++}
++
++
++__inline static unsigned char * get_sa(unsigned char *pframe)
++{
++	unsigned char 	*sa;
++	unsigned int	to_fr_ds	= (GetToDs(pframe) << 1) | GetFrDs(pframe);
++
++	switch (to_fr_ds) {
++		case 0x00:	// ToDs=0, FromDs=0
++			sa = GetAddr2Ptr(pframe);
++			break;
++		case 0x01:	// ToDs=0, FromDs=1
++			sa = GetAddr3Ptr(pframe);
++			break;
++		case 0x02:	// ToDs=1, FromDs=0
++			sa = GetAddr2Ptr(pframe);
++			break;
++		default:	// ToDs=1, FromDs=1
++			sa = GetAddr4Ptr(pframe);
++			break;
++	}
++
++	return sa;
++}
++
++__inline static unsigned char * get_hdr_bssid(unsigned char *pframe)
++{
++	unsigned char 	*sa;
++	unsigned int	to_fr_ds	= (GetToDs(pframe) << 1) | GetFrDs(pframe);
++
++	switch (to_fr_ds) {
++		case 0x00:	// ToDs=0, FromDs=0
++			sa = GetAddr3Ptr(pframe);
++			break;
++		case 0x01:	// ToDs=0, FromDs=1
++			sa = GetAddr2Ptr(pframe);
++			break;
++		case 0x02:	// ToDs=1, FromDs=0
++			sa = GetAddr1Ptr(pframe);
++			break;
++		case 0x03:	// ToDs=1, FromDs=1
++			sa = GetAddr1Ptr(pframe);
++			break;
++		default:	
++			sa =NULL; //???????
++			break;
++	}
++
++	return sa;
++}
++
++
++__inline static int IsFrameTypeCtrl(unsigned char *pframe)
++{
++	if(WIFI_CTRL_TYPE == GetFrameType(pframe))
++		return _TRUE;
++	else
++		return _FALSE;
++}
++/*-----------------------------------------------------------------------------
++			Below is for the security related definition
++------------------------------------------------------------------------------*/
++#define _RESERVED_FRAME_TYPE_	0
++#define _SKB_FRAME_TYPE_		2
++#define _PRE_ALLOCMEM_			1
++#define _PRE_ALLOCHDR_			3
++#define _PRE_ALLOCLLCHDR_		4
++#define _PRE_ALLOCICVHDR_		5
++#define _PRE_ALLOCMICHDR_		6
++
++#define _SIFSTIME_				((priv->pmib->dot11BssType.net_work_type&WIRELESS_11A)?16:10)
++#define _ACKCTSLNG_				14	//14 bytes long, including crclng
++#define _CRCLNG_				4
++
++#define _ASOCREQ_IE_OFFSET_		4	// excluding wlan_hdr
++#define	_ASOCRSP_IE_OFFSET_		6
++#define _REASOCREQ_IE_OFFSET_	10
++#define _REASOCRSP_IE_OFFSET_	6
++#define _PROBEREQ_IE_OFFSET_	0
++#define	_PROBERSP_IE_OFFSET_	12
++#define _AUTH_IE_OFFSET_		6
++#define _DEAUTH_IE_OFFSET_		0
++#define _BEACON_IE_OFFSET_		12
++#define _PUBLIC_ACTION_IE_OFFSET_	8
++
++#define _FIXED_IE_LENGTH_			_BEACON_IE_OFFSET_
++
++#define _SSID_IE_				0
++#define _SUPPORTEDRATES_IE_	1
++#define _DSSET_IE_				3
++#define _TIM_IE_					5
++#define _IBSS_PARA_IE_			6
++#define _COUNTRY_IE_			7
++#define _CHLGETXT_IE_			16
++#define _POW_CAP_IE_			33
++#define _SUPPORTED_CH_IE_		36
++#define _CH_SWTICH_ANNOUNCE_	37	//Secondary Channel Offset
++#define _RSN_IE_2_				48
++#define _SSN_IE_1_					221
++#define _ERPINFO_IE_			42
++#define _EXT_SUPPORTEDRATES_IE_	50
++
++#define _HT_CAPABILITY_IE_			45
++#define _FTIE_						55
++#define _TIMEOUT_ITVL_IE_			56
++#define _SRC_IE_				59
++#define _HT_EXTRA_INFO_IE_			61
++#define _HT_ADD_INFO_IE_			61 //_HT_EXTRA_INFO_IE_
++
++#define	EID_BSSCoexistence			72 // 20/40 BSS Coexistence
++#define	EID_BSSIntolerantChlReport	73
++#define _RIC_Descriptor_IE_			75
++
++#ifdef CONFIG_IEEE80211W
++#define _MME_IE_					76 //802.11w Management MIC element
++#endif //CONFIG_IEEE80211W
++#define _LINK_ID_IE_					101
++#define _CH_SWITCH_TIMING_		104
++#define _PTI_BUFFER_STATUS_		106
++#define _EXT_CAP_IE_				127
++#define _VENDOR_SPECIFIC_IE_		221
++
++#define	_RESERVED47_				47
++
++/* ---------------------------------------------------------------------------
++					Below is the fixed elements...
++-----------------------------------------------------------------------------*/
++#define _AUTH_ALGM_NUM_			2
++#define _AUTH_SEQ_NUM_			2
++#define _BEACON_ITERVAL_		2
++#define _CAPABILITY_			2
++#define _CURRENT_APADDR_		6
++#define _LISTEN_INTERVAL_		2
++#define _RSON_CODE_				2
++#define _ASOC_ID_				2
++#define _STATUS_CODE_			2
++#define _TIMESTAMP_				8
++
++#define AUTH_ODD_TO				0
++#define AUTH_EVEN_TO			1
++
++#define WLAN_ETHCONV_ENCAP		1
++#define WLAN_ETHCONV_RFC1042	2
++#define WLAN_ETHCONV_8021h		3
++
++#define cap_ESS BIT(0)
++#define cap_IBSS BIT(1)
++#define cap_CFPollable BIT(2)
++#define cap_CFRequest BIT(3)
++#define cap_Privacy BIT(4)
++#define cap_ShortPremble BIT(5)
++#define cap_PBCC	BIT(6)
++#define cap_ChAgility	BIT(7)
++#define cap_SpecMgmt	BIT(8)
++#define cap_QoS	BIT(9)
++#define cap_ShortSlot	BIT(10)
++
++/*-----------------------------------------------------------------------------
++				Below is the definition for 802.11i / 802.1x
++------------------------------------------------------------------------------*/
++#define _IEEE8021X_MGT_			1		// WPA
++#define _IEEE8021X_PSK_			2		// WPA with pre-shared key
++
++/*
++#define _NO_PRIVACY_			0
++#define _WEP_40_PRIVACY_		1
++#define _TKIP_PRIVACY_			2
++#define _WRAP_PRIVACY_			3
++#define _CCMP_PRIVACY_			4
++#define _WEP_104_PRIVACY_		5
++#define _WEP_WPA_MIXED_PRIVACY_ 6	// WEP + WPA
++*/
++
++#ifdef CONFIG_IEEE80211W
++#define _MME_IE_LENGTH_  18
++#endif //CONFIG_IEEE80211W				
++/*-----------------------------------------------------------------------------
++				Below is the definition for WMM
++------------------------------------------------------------------------------*/
++#define _WMM_IE_Length_				7  // for WMM STA
++#define _WMM_Para_Element_Length_		24
++
++
++/*-----------------------------------------------------------------------------
++				Below is the definition for 802.11n 
++------------------------------------------------------------------------------*/
++
++/* block-ack parameters */
++#define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002
++#define IEEE80211_ADDBA_PARAM_TID_MASK 0x003C
++#define RTW_IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFA0
++#define IEEE80211_DELBA_PARAM_TID_MASK 0xF000
++#define IEEE80211_DELBA_PARAM_INITIATOR_MASK 0x0800
++
++//#ifdef CONFIG_80211N_HT
++
++#define SetOrderBit(pbuf)	\
++	do	{	\
++		*(unsigned short *)(pbuf) |= cpu_to_le16(_ORDER_); \
++	} while(0)
++
++#define GetOrderBit(pbuf)	(((*(unsigned short *)(pbuf)) & le16_to_cpu(_ORDER_)) != 0)
++
++
++/**
++ * struct rtw_ieee80211_bar - HT Block Ack Request
++ *
++ * This structure refers to "HT BlockAckReq" as
++ * described in 802.11n draft section 7.2.1.7.1
++ */
++ #if defined(PLATFORM_LINUX) || defined(CONFIG_RTL8712FW)
++struct rtw_ieee80211_bar {
++	unsigned short frame_control;
++	unsigned short duration;
++	unsigned char ra[6];
++	unsigned char ta[6];
++	unsigned short control;
++	unsigned short start_seq_num;
++} __attribute__((packed));
++ #endif
++
++/* 802.11 BAR control masks */
++#define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL     0x0000
++#define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA  0x0004
++
++
++ #if defined(PLATFORM_LINUX) || defined(CONFIG_RTL8712FW) || defined(PLATFORM_FREEBSD)
++
++
++
++ /**
++ * struct rtw_ieee80211_ht_cap - HT capabilities
++ *
++ * This structure refers to "HT capabilities element" as
++ * described in 802.11n draft section 7.3.2.52
++ */
++ 
++struct rtw_ieee80211_ht_cap {
++	unsigned short 	cap_info;
++	unsigned char 	ampdu_params_info;
++	unsigned char 	supp_mcs_set[16];
++	unsigned short 	extended_ht_cap_info;
++	unsigned int		tx_BF_cap_info;
++	unsigned char	       antenna_selection_info;
++} __attribute__ ((packed));
++
++/**
++ * struct rtw_ieee80211_ht_cap - HT additional information
++ *
++ * This structure refers to "HT information element" as
++ * described in 802.11n draft section 7.3.2.53
++ */
++struct ieee80211_ht_addt_info {
++	unsigned char 	control_chan;
++	unsigned char		ht_param;
++	unsigned short	operation_mode;
++	unsigned short	stbc_param;
++	unsigned char		basic_set[16];
++} __attribute__ ((packed));
++
++
++struct HT_caps_element
++{
++	union
++	{ 
++		struct 
++		{ 	
++			unsigned short	HT_caps_info;
++			unsigned char	AMPDU_para;
++			unsigned char	MCS_rate[16];
++			unsigned short	HT_ext_caps;
++			unsigned int	Beamforming_caps;
++			unsigned char	ASEL_caps;
++		} HT_cap_element;
++		unsigned char HT_cap[26];
++	}u;
++} __attribute__ ((packed));
++
++struct HT_info_element
++{
++	unsigned char	primary_channel;
++	unsigned char	infos[5];
++	unsigned char	MCS_rate[16];
++}  __attribute__ ((packed));
++
++struct AC_param
++{
++	unsigned char		ACI_AIFSN;
++	unsigned char		CW;
++	unsigned short	TXOP_limit;
++}  __attribute__ ((packed));
++
++struct WMM_para_element
++{
++	unsigned char		QoS_info;
++	unsigned char		reserved;
++	struct AC_param	ac_param[4];
++}  __attribute__ ((packed));
++
++struct ADDBA_request
++{
++	unsigned char		dialog_token;
++	unsigned short	BA_para_set;
++	unsigned short	BA_timeout_value;
++	unsigned short	BA_starting_seqctrl;
++}  __attribute__ ((packed));
++
++
++
++#endif
++
++
++#ifdef PLATFORM_WINDOWS
++
++#pragma pack(1)
++
++struct rtw_ieee80211_ht_cap {
++	unsigned short 	cap_info;
++	unsigned char 	ampdu_params_info;
++	unsigned char 	supp_mcs_set[16];
++	unsigned short 	extended_ht_cap_info;
++	unsigned int		tx_BF_cap_info;
++	unsigned char	       antenna_selection_info;
++};
++
++
++struct ieee80211_ht_addt_info {
++	unsigned char 	control_chan;
++	unsigned char		ht_param;
++	unsigned short	operation_mode;
++	unsigned short	stbc_param;
++	unsigned char		basic_set[16];
++};
++
++struct HT_caps_element
++{
++	union
++	{ 
++		struct 
++		{ 	
++			unsigned short	HT_caps_info;
++			unsigned char	AMPDU_para;
++			unsigned char	MCS_rate[16];
++			unsigned short	HT_ext_caps;
++			unsigned int	Beamforming_caps;
++			unsigned char	ASEL_caps;
++		} HT_cap_element;
++		unsigned char HT_cap[26];
++	};
++};
++
++struct HT_info_element
++{
++	unsigned char	primary_channel;
++	unsigned char	infos[5];
++	unsigned char	MCS_rate[16];
++};
++
++struct AC_param
++{
++	unsigned char		ACI_AIFSN;
++	unsigned char		CW;
++	unsigned short	TXOP_limit;
++};
++
++struct WMM_para_element
++{
++	unsigned char		QoS_info;
++	unsigned char		reserved;
++	struct AC_param	ac_param[4];
++};
++
++struct ADDBA_request
++{
++	unsigned char		dialog_token;
++	unsigned short	BA_para_set;
++	unsigned short	BA_timeout_value;
++	unsigned short	BA_starting_seqctrl;
++};
++
++
++#pragma pack()
++
++#endif
++
++
++/* 802.11n HT capabilities masks */
++#define IEEE80211_HT_CAP_SUP_WIDTH		0x0002
++#define IEEE80211_HT_CAP_SM_PS			0x000C
++#define IEEE80211_HT_CAP_GRN_FLD		0x0010
++#define IEEE80211_HT_CAP_SGI_20			0x0020
++#define IEEE80211_HT_CAP_SGI_40			0x0040
++#define IEEE80211_HT_CAP_TX_STBC			0x0080
++#define IEEE80211_HT_CAP_RX_STBC		0x0300
++#define IEEE80211_HT_CAP_DELAY_BA		0x0400
++#define IEEE80211_HT_CAP_MAX_AMSDU		0x0800
++#define IEEE80211_HT_CAP_DSSSCCK40		0x1000
++/* 802.11n HT capability AMPDU settings */
++#define IEEE80211_HT_CAP_AMPDU_FACTOR		0x03
++#define IEEE80211_HT_CAP_AMPDU_DENSITY		0x1C
++/* 802.11n HT capability MSC set */
++#define IEEE80211_SUPP_MCS_SET_UEQM		4
++#define IEEE80211_HT_CAP_MAX_STREAMS		4
++#define IEEE80211_SUPP_MCS_SET_LEN		10
++/* maximum streams the spec allows */
++#define IEEE80211_HT_CAP_MCS_TX_DEFINED		0x01
++#define IEEE80211_HT_CAP_MCS_TX_RX_DIFF		0x02
++#define IEEE80211_HT_CAP_MCS_TX_STREAMS		0x0C
++#define IEEE80211_HT_CAP_MCS_TX_UEQM		0x10
++/* 802.11n HT IE masks */
++#define IEEE80211_HT_IE_CHA_SEC_OFFSET		0x03
++#define IEEE80211_HT_IE_CHA_SEC_NONE	 	0x00
++#define IEEE80211_HT_IE_CHA_SEC_ABOVE 		0x01
++#define IEEE80211_HT_IE_CHA_SEC_BELOW 		0x03
++#define IEEE80211_HT_IE_CHA_WIDTH		0x04
++#define IEEE80211_HT_IE_HT_PROTECTION		0x0003
++#define IEEE80211_HT_IE_NON_GF_STA_PRSNT	0x0004
++#define IEEE80211_HT_IE_NON_HT_STA_PRSNT	0x0010
++
++/* block-ack parameters */
++#define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002
++#define IEEE80211_ADDBA_PARAM_TID_MASK 0x003C
++#define RTW_IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFA0
++#define IEEE80211_DELBA_PARAM_TID_MASK 0xF000
++#define IEEE80211_DELBA_PARAM_INITIATOR_MASK 0x0800
++
++/*
++ * A-PMDU buffer sizes
++ * According to IEEE802.11n spec size varies from 8K to 64K (in powers of 2)
++ */
++#define IEEE80211_MIN_AMPDU_BUF 0x8
++#define IEEE80211_MAX_AMPDU_BUF 0x40
++
++
++/* Spatial Multiplexing Power Save Modes */
++#define WLAN_HT_CAP_SM_PS_STATIC		0
++#define WLAN_HT_CAP_SM_PS_DYNAMIC	1
++#define WLAN_HT_CAP_SM_PS_INVALID	2
++#define WLAN_HT_CAP_SM_PS_DISABLED	3
++
++
++#define OP_MODE_PURE                    0
++#define OP_MODE_MAY_BE_LEGACY_STAS      1
++#define OP_MODE_20MHZ_HT_STA_ASSOCED    2
++#define OP_MODE_MIXED                   3
++
++#define HT_INFO_HT_PARAM_SECONDARY_CHNL_OFF_MASK	((u8) BIT(0) | BIT(1))
++#define HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE		((u8) BIT(0))
++#define HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW		((u8) BIT(0) | BIT(1))
++#define HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH		((u8) BIT(2))
++#define HT_INFO_HT_PARAM_RIFS_MODE			((u8) BIT(3))
++#define HT_INFO_HT_PARAM_CTRL_ACCESS_ONLY		((u8) BIT(4))
++#define HT_INFO_HT_PARAM_SRV_INTERVAL_GRANULARITY	((u8) BIT(5))
++
++#define HT_INFO_OPERATION_MODE_OP_MODE_MASK	\
++		((u16) (0x0001 | 0x0002))
++#define HT_INFO_OPERATION_MODE_OP_MODE_OFFSET		0
++#define HT_INFO_OPERATION_MODE_NON_GF_DEVS_PRESENT	((u8) BIT(2))
++#define HT_INFO_OPERATION_MODE_TRANSMIT_BURST_LIMIT	((u8) BIT(3))
++#define HT_INFO_OPERATION_MODE_NON_HT_STA_PRESENT	((u8) BIT(4))
++
++#define HT_INFO_STBC_PARAM_DUAL_BEACON			((u16) BIT(6))
++#define HT_INFO_STBC_PARAM_DUAL_STBC_PROTECT		((u16) BIT(7))
++#define HT_INFO_STBC_PARAM_SECONDARY_BCN		((u16) BIT(8))
++#define HT_INFO_STBC_PARAM_LSIG_TXOP_PROTECT_ALLOWED	((u16) BIT(9))
++#define HT_INFO_STBC_PARAM_PCO_ACTIVE			((u16) BIT(10))
++#define HT_INFO_STBC_PARAM_PCO_PHASE			((u16) BIT(11))
++
++
++
++//#endif
++
++//	===============WPS Section===============
++//	For WPSv1.0
++#define WPSOUI							0x0050f204
++//	WPS attribute ID
++#define WPS_ATTR_VER1					0x104A
++#define WPS_ATTR_SIMPLE_CONF_STATE	0x1044
++#define WPS_ATTR_RESP_TYPE			0x103B
++#define WPS_ATTR_UUID_E				0x1047
++#define WPS_ATTR_MANUFACTURER		0x1021
++#define WPS_ATTR_MODEL_NAME			0x1023
++#define WPS_ATTR_MODEL_NUMBER		0x1024
++#define WPS_ATTR_SERIAL_NUMBER		0x1042
++#define WPS_ATTR_PRIMARY_DEV_TYPE	0x1054
++#define WPS_ATTR_SEC_DEV_TYPE_LIST	0x1055
++#define WPS_ATTR_DEVICE_NAME			0x1011
++#define WPS_ATTR_CONF_METHOD			0x1008
++#define WPS_ATTR_RF_BANDS				0x103C
++#define WPS_ATTR_DEVICE_PWID			0x1012
++#define WPS_ATTR_REQUEST_TYPE			0x103A
++#define WPS_ATTR_ASSOCIATION_STATE	0x1002
++#define WPS_ATTR_CONFIG_ERROR			0x1009
++#define WPS_ATTR_VENDOR_EXT			0x1049
++#define WPS_ATTR_SELECTED_REGISTRAR	0x1041
++
++//	Value of WPS attribute "WPS_ATTR_DEVICE_NAME
++#define WPS_MAX_DEVICE_NAME_LEN		32
++
++//	Value of WPS Request Type Attribute
++#define WPS_REQ_TYPE_ENROLLEE_INFO_ONLY			0x00
++#define WPS_REQ_TYPE_ENROLLEE_OPEN_8021X		0x01
++#define WPS_REQ_TYPE_REGISTRAR					0x02
++#define WPS_REQ_TYPE_WLAN_MANAGER_REGISTRAR	0x03
++
++//	Value of WPS Response Type Attribute
++#define WPS_RESPONSE_TYPE_INFO_ONLY	0x00
++#define WPS_RESPONSE_TYPE_8021X		0x01
++#define WPS_RESPONSE_TYPE_REGISTRAR	0x02
++#define WPS_RESPONSE_TYPE_AP			0x03
++
++//	Value of WPS WiFi Simple Configuration State Attribute
++#define WPS_WSC_STATE_NOT_CONFIG	0x01
++#define WPS_WSC_STATE_CONFIG			0x02
++
++//	Value of WPS Version Attribute
++#define WPS_VERSION_1					0x10
++
++//	Value of WPS Configuration Method Attribute
++#define WPS_CONFIG_METHOD_FLASH		0x0001
++#define WPS_CONFIG_METHOD_ETHERNET	0x0002
++#define WPS_CONFIG_METHOD_LABEL		0x0004
++#define WPS_CONFIG_METHOD_DISPLAY	0x0008
++#define WPS_CONFIG_METHOD_E_NFC		0x0010
++#define WPS_CONFIG_METHOD_I_NFC		0x0020
++#define WPS_CONFIG_METHOD_NFC		0x0040
++#define WPS_CONFIG_METHOD_PBC		0x0080
++#define WPS_CONFIG_METHOD_KEYPAD	0x0100
++#define WPS_CONFIG_METHOD_VPBC		0x0280
++#define WPS_CONFIG_METHOD_PPBC		0x0480
++#define WPS_CONFIG_METHOD_VDISPLAY	0x2008
++#define WPS_CONFIG_METHOD_PDISPLAY	0x4008
++
++//	Value of Category ID of WPS Primary Device Type Attribute
++#define WPS_PDT_CID_DISPLAYS			0x0007
++#define WPS_PDT_CID_MULIT_MEDIA		0x0008
++#define WPS_PDT_CID_RTK_WIDI			WPS_PDT_CID_MULIT_MEDIA
++
++//	Value of Sub Category ID of WPS Primary Device Type Attribute
++#define WPS_PDT_SCID_MEDIA_SERVER	0x0005
++#define WPS_PDT_SCID_RTK_DMP			WPS_PDT_SCID_MEDIA_SERVER
++
++//	Value of Device Password ID
++#define WPS_DPID_PIN					0x0000
++#define WPS_DPID_USER_SPEC			0x0001
++#define WPS_DPID_MACHINE_SPEC			0x0002
++#define WPS_DPID_REKEY					0x0003
++#define WPS_DPID_PBC					0x0004
++#define WPS_DPID_REGISTRAR_SPEC		0x0005
++
++//	Value of WPS RF Bands Attribute
++#define WPS_RF_BANDS_2_4_GHZ		0x01
++#define WPS_RF_BANDS_5_GHZ		0x02
++
++//	Value of WPS Association State Attribute
++#define WPS_ASSOC_STATE_NOT_ASSOCIATED			0x00
++#define WPS_ASSOC_STATE_CONNECTION_SUCCESS		0x01
++#define WPS_ASSOC_STATE_CONFIGURATION_FAILURE	0x02
++#define WPS_ASSOC_STATE_ASSOCIATION_FAILURE		0x03
++#define WPS_ASSOC_STATE_IP_FAILURE				0x04
++
++//	=====================P2P Section=====================
++//	For P2P
++#define	P2POUI							0x506F9A09
++
++//	P2P Attribute ID
++#define	P2P_ATTR_STATUS					0x00
++#define	P2P_ATTR_MINOR_REASON_CODE		0x01
++#define	P2P_ATTR_CAPABILITY				0x02
++#define	P2P_ATTR_DEVICE_ID				0x03
++#define	P2P_ATTR_GO_INTENT				0x04
++#define	P2P_ATTR_CONF_TIMEOUT			0x05
++#define	P2P_ATTR_LISTEN_CH				0x06
++#define	P2P_ATTR_GROUP_BSSID				0x07
++#define	P2P_ATTR_EX_LISTEN_TIMING		0x08
++#define	P2P_ATTR_INTENTED_IF_ADDR		0x09
++#define	P2P_ATTR_MANAGEABILITY			0x0A
++#define	P2P_ATTR_CH_LIST					0x0B
++#define	P2P_ATTR_NOA						0x0C
++#define	P2P_ATTR_DEVICE_INFO				0x0D
++#define	P2P_ATTR_GROUP_INFO				0x0E
++#define	P2P_ATTR_GROUP_ID					0x0F
++#define	P2P_ATTR_INTERFACE				0x10
++#define	P2P_ATTR_OPERATING_CH			0x11
++#define	P2P_ATTR_INVITATION_FLAGS		0x12
++
++//	Value of Status Attribute
++#define	P2P_STATUS_SUCCESS						0x00
++#define	P2P_STATUS_FAIL_INFO_UNAVAILABLE		0x01
++#define	P2P_STATUS_FAIL_INCOMPATIBLE_PARAM		0x02
++#define	P2P_STATUS_FAIL_LIMIT_REACHED			0x03
++#define	P2P_STATUS_FAIL_INVALID_PARAM			0x04
++#define	P2P_STATUS_FAIL_REQUEST_UNABLE			0x05
++#define	P2P_STATUS_FAIL_PREVOUS_PROTO_ERR		0x06
++#define	P2P_STATUS_FAIL_NO_COMMON_CH			0x07
++#define	P2P_STATUS_FAIL_UNKNOWN_P2PGROUP		0x08
++#define	P2P_STATUS_FAIL_BOTH_GOINTENT_15		0x09
++#define	P2P_STATUS_FAIL_INCOMPATIBLE_PROVSION	0x0A
++#define	P2P_STATUS_FAIL_USER_REJECT				0x0B
++
++//	Value of Inviation Flags Attribute
++#define	P2P_INVITATION_FLAGS_PERSISTENT			BIT(0)
++
++#define	DMP_P2P_DEVCAP_SUPPORT	(P2P_DEVCAP_SERVICE_DISCOVERY | \
++									P2P_DEVCAP_CLIENT_DISCOVERABILITY | \
++									P2P_DEVCAP_CONCURRENT_OPERATION | \
++									P2P_DEVCAP_INVITATION_PROC)
++
++#define	DMP_P2P_GRPCAP_SUPPORT	(P2P_GRPCAP_INTRABSS)
++
++//	Value of Device Capability Bitmap
++#define	P2P_DEVCAP_SERVICE_DISCOVERY		BIT(0)
++#define	P2P_DEVCAP_CLIENT_DISCOVERABILITY	BIT(1)
++#define	P2P_DEVCAP_CONCURRENT_OPERATION	BIT(2)
++#define	P2P_DEVCAP_INFRA_MANAGED			BIT(3)
++#define	P2P_DEVCAP_DEVICE_LIMIT				BIT(4)
++#define	P2P_DEVCAP_INVITATION_PROC			BIT(5)
++
++//	Value of Group Capability Bitmap
++#define	P2P_GRPCAP_GO							BIT(0)
++#define	P2P_GRPCAP_PERSISTENT_GROUP			BIT(1)
++#define	P2P_GRPCAP_GROUP_LIMIT				BIT(2)
++#define	P2P_GRPCAP_INTRABSS					BIT(3)
++#define	P2P_GRPCAP_CROSS_CONN				BIT(4)
++#define	P2P_GRPCAP_PERSISTENT_RECONN		BIT(5)
++#define	P2P_GRPCAP_GROUP_FORMATION			BIT(6)
++
++//	P2P Public Action Frame ( Management Frame )
++#define	P2P_PUB_ACTION_ACTION				0x09
++
++//	P2P Public Action Frame Type
++#define	P2P_GO_NEGO_REQ						0
++#define	P2P_GO_NEGO_RESP						1
++#define	P2P_GO_NEGO_CONF						2
++#define	P2P_INVIT_REQ							3
++#define	P2P_INVIT_RESP							4
++#define	P2P_DEVDISC_REQ						5
++#define	P2P_DEVDISC_RESP						6
++#define	P2P_PROVISION_DISC_REQ				7
++#define	P2P_PROVISION_DISC_RESP				8
++
++//	P2P Action Frame Type
++#define	P2P_NOTICE_OF_ABSENCE	0
++#define	P2P_PRESENCE_REQUEST		1
++#define	P2P_PRESENCE_RESPONSE	2
++#define	P2P_GO_DISC_REQUEST		3
++
++
++#define	P2P_MAX_PERSISTENT_GROUP_NUM		10
++
++#define	P2P_PROVISIONING_SCAN_CNT			3
++
++#define	P2P_WILDCARD_SSID_LEN				7
++
++#define	P2P_FINDPHASE_EX_NONE				0	// default value, used when: (1)p2p disabed or (2)p2p enabled but only do 1 scan phase
++#define	P2P_FINDPHASE_EX_FULL				1	// used when p2p enabled and want to do 1 scan phase and P2P_FINDPHASE_EX_MAX-1 find phase
++#define	P2P_FINDPHASE_EX_SOCIAL_FIRST		(P2P_FINDPHASE_EX_FULL+1) 
++#define	P2P_FINDPHASE_EX_MAX					4
++#define	P2P_FINDPHASE_EX_SOCIAL_LAST		P2P_FINDPHASE_EX_MAX
++
++#define	P2P_PROVISION_TIMEOUT				5000	//	5 seconds timeout for sending the provision discovery request
++#define	P2P_CONCURRENT_PROVISION_TIMEOUT	3000	//	3 seconds timeout for sending the provision discovery request under concurrent mode
++#define	P2P_GO_NEGO_TIMEOUT					5000	//	5 seconds timeout for receiving the group negotation response
++#define	P2P_CONCURRENT_GO_NEGO_TIMEOUT		3000	//	3 seconds timeout for sending the negotiation request under concurrent mode
++#define	P2P_TX_PRESCAN_TIMEOUT				100		//	100ms
++#define	P2P_INVITE_TIMEOUT					5000	//	5 seconds timeout for sending the invitation request
++#define	P2P_CONCURRENT_INVITE_TIMEOUT		3000	//	3 seconds timeout for sending the invitation request under concurrent mode
++#define	P2P_RESET_SCAN_CH						15000	//	15 seconds timeout to reset the scan channel ( based on channel plan )
++#define	P2P_MAX_INTENT						15
++
++#define	P2P_MAX_NOA_NUM						2
++
++//	WPS Configuration Method
++#define	WPS_CM_NONE							0x0000
++#define	WPS_CM_LABEL							0x0004
++#define	WPS_CM_DISPLYA						0x0008
++#define	WPS_CM_EXTERNAL_NFC_TOKEN			0x0010
++#define	WPS_CM_INTEGRATED_NFC_TOKEN		0x0020
++#define	WPS_CM_NFC_INTERFACE					0x0040
++#define	WPS_CM_PUSH_BUTTON					0x0080
++#define	WPS_CM_KEYPAD						0x0100
++#define	WPS_CM_SW_PUHS_BUTTON				0x0280
++#define	WPS_CM_HW_PUHS_BUTTON				0x0480
++#define	WPS_CM_SW_DISPLAY_PIN				0x2008
++#define	WPS_CM_LCD_DISPLAY_PIN				0x4008
++
++enum P2P_ROLE {
++	P2P_ROLE_DISABLE = 0,
++	P2P_ROLE_DEVICE = 1,
++	P2P_ROLE_CLIENT = 2,
++	P2P_ROLE_GO = 3	
++};
++
++enum P2P_STATE {
++	P2P_STATE_NONE = 0,							//	P2P disable
++	P2P_STATE_IDLE = 1,								//	P2P had enabled and do nothing
++	P2P_STATE_LISTEN = 2,							//	In pure listen state
++	P2P_STATE_SCAN = 3,							//	In scan phase
++	P2P_STATE_FIND_PHASE_LISTEN = 4,				//	In the listen state of find phase
++	P2P_STATE_FIND_PHASE_SEARCH = 5,				//	In the search state of find phase
++	P2P_STATE_TX_PROVISION_DIS_REQ = 6,			//	In P2P provisioning discovery
++	P2P_STATE_RX_PROVISION_DIS_RSP = 7,
++	P2P_STATE_RX_PROVISION_DIS_REQ = 8,	
++	P2P_STATE_GONEGO_ING = 9,						//	Doing the group owner negoitation handshake
++	P2P_STATE_GONEGO_OK = 10,						//	finish the group negoitation handshake with success
++	P2P_STATE_GONEGO_FAIL = 11,					//	finish the group negoitation handshake with failure
++	P2P_STATE_RECV_INVITE_REQ_MATCH = 12,		//	receiving the P2P Inviation request and match with the profile.
++	P2P_STATE_PROVISIONING_ING = 13,				//	Doing the P2P WPS
++	P2P_STATE_PROVISIONING_DONE = 14,			//	Finish the P2P WPS
++	P2P_STATE_TX_INVITE_REQ = 15,					//	Transmit the P2P Invitation request
++	P2P_STATE_RX_INVITE_RESP_OK = 16,				//	Receiving the P2P Invitation response with sucess
++	P2P_STATE_RECV_INVITE_REQ_DISMATCH = 17,	//	receiving the P2P Inviation request and dismatch with the profile.
++	P2P_STATE_RECV_INVITE_REQ_GO = 18,			//	receiving the P2P Inviation request and this wifi is GO.
++	P2P_STATE_RECV_INVITE_REQ_JOIN = 19,			//	receiving the P2P Inviation request to join an existing P2P Group.
++	P2P_STATE_RX_INVITE_RESP_FAIL = 20,			//	recveing the P2P Inviation response with failure
++	P2P_STATE_RX_INFOR_NOREADY = 21, 			// receiving p2p negoitation response with information is not available
++	P2P_STATE_TX_INFOR_NOREADY = 22, 			// sending p2p negoitation response with information is not available
++};
++
++enum P2P_WPSINFO {
++	P2P_NO_WPSINFO						= 0,
++	P2P_GOT_WPSINFO_PEER_DISPLAY_PIN	= 1,
++	P2P_GOT_WPSINFO_SELF_DISPLAY_PIN	= 2,
++	P2P_GOT_WPSINFO_PBC					= 3,
++};
++
++#define	P2P_PRIVATE_IOCTL_SET_LEN		64
++
++enum P2P_PROTO_WK_ID
++{
++	P2P_FIND_PHASE_WK = 0,
++	P2P_RESTORE_STATE_WK = 1,
++	P2P_PRE_TX_PROVDISC_PROCESS_WK = 2,
++	P2P_PRE_TX_NEGOREQ_PROCESS_WK = 3,	
++	P2P_PRE_TX_INVITEREQ_PROCESS_WK = 4,
++	P2P_AP_P2P_CH_SWITCH_PROCESS_WK =5,
++	P2P_RO_CH_WK = 6,
++};
++
++#ifdef CONFIG_P2P_PS
++enum P2P_PS_STATE
++{
++	P2P_PS_DISABLE = 0,
++	P2P_PS_ENABLE = 1,
++	P2P_PS_SCAN = 2,
++	P2P_PS_SCAN_DONE = 3,
++	P2P_PS_ALLSTASLEEP = 4, // for P2P GO
++};
++
++enum P2P_PS_MODE
++{
++	P2P_PS_NONE = 0,
++	P2P_PS_CTWINDOW = 1,
++	P2P_PS_NOA	 = 2,
++	P2P_PS_MIX = 3, // CTWindow and NoA
++};
++#endif // CONFIG_P2P_PS
++
++//	=====================WFD Section=====================
++//	For Wi-Fi Display
++#define	WFD_ATTR_DEVICE_INFO			0x00
++#define	WFD_ATTR_ASSOC_BSSID			0x01
++#define	WFD_ATTR_COUPLED_SINK_INFO	0x06
++#define	WFD_ATTR_LOCAL_IP_ADDR		0x08
++#define	WFD_ATTR_SESSION_INFO		0x09
++#define	WFD_ATTR_ALTER_MAC			0x0a
++
++//	For WFD Device Information Attribute
++#define	WFD_DEVINFO_SOURCE					0x0000
++#define	WFD_DEVINFO_PSINK					0x0001
++#define	WFD_DEVINFO_SSINK					0x0002
++#define	WFD_DEVINFO_DUAL 					0x0003
++
++#define	WFD_DEVINFO_SESSION_AVAIL			0x0010
++#define	WFD_DEVINFO_WSD						0x0040
++#define	WFD_DEVINFO_PC_TDLS					0x0080
++#define	WFD_DEVINFO_HDCP_SUPPORT			0x0100
++
++
++#ifdef  CONFIG_TX_MCAST2UNI
++#define IP_MCAST_MAC(mac)		((mac[0]==0x01)&&(mac[1]==0x00)&&(mac[2]==0x5e))
++#define ICMPV6_MCAST_MAC(mac)	((mac[0]==0x33)&&(mac[1]==0x33)&&(mac[2]!=0xff))
++#endif	// CONFIG_TX_MCAST2UNI
++
++
++
++#endif // _WIFI_H_
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/wlan_bssdef.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/wlan_bssdef.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/wlan_bssdef.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/wlan_bssdef.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,703 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __WLAN_BSSDEF_H__
++#define __WLAN_BSSDEF_H__
++
++
++#define MAX_IE_SZ	768
++
++
++#ifdef PLATFORM_LINUX
++
++#define NDIS_802_11_LENGTH_SSID         32
++#define NDIS_802_11_LENGTH_RATES        8
++#define NDIS_802_11_LENGTH_RATES_EX     16
++
++typedef unsigned char   NDIS_802_11_MAC_ADDRESS[6];
++typedef long    		NDIS_802_11_RSSI;           // in dBm
++typedef unsigned char   NDIS_802_11_RATES[NDIS_802_11_LENGTH_RATES];        // Set of 8 data rates
++typedef unsigned char   NDIS_802_11_RATES_EX[NDIS_802_11_LENGTH_RATES_EX];  // Set of 16 data rates
++
++
++typedef  ULONG  NDIS_802_11_KEY_INDEX;
++typedef unsigned long long NDIS_802_11_KEY_RSC;
++
++
++typedef struct _NDIS_802_11_SSID
++{
++  ULONG  SsidLength;
++  UCHAR  Ssid[32];
++} NDIS_802_11_SSID, *PNDIS_802_11_SSID;
++
++typedef enum _NDIS_802_11_NETWORK_TYPE
++{
++    Ndis802_11FH,
++    Ndis802_11DS,
++    Ndis802_11OFDM5,
++    Ndis802_11OFDM24,
++    Ndis802_11NetworkTypeMax    // not a real type, defined as an upper bound
++} NDIS_802_11_NETWORK_TYPE, *PNDIS_802_11_NETWORK_TYPE;
++
++typedef struct _NDIS_802_11_CONFIGURATION_FH
++{
++    ULONG           Length;             // Length of structure
++    ULONG           HopPattern;         // As defined by 802.11, MSB set
++    ULONG           HopSet;             // to one if non-802.11
++    ULONG           DwellTime;          // units are Kusec
++} NDIS_802_11_CONFIGURATION_FH, *PNDIS_802_11_CONFIGURATION_FH;
++ 
++
++/*
++	FW will only save the channel number in DSConfig.
++	ODI Handler will convert the channel number to freq. number.	
++*/
++typedef struct _NDIS_802_11_CONFIGURATION
++{
++    ULONG           Length;             // Length of structure
++    ULONG           BeaconPeriod;       // units are Kusec
++    ULONG           ATIMWindow;         // units are Kusec
++    ULONG           DSConfig;           // Frequency, units are kHz
++    NDIS_802_11_CONFIGURATION_FH    FHConfig;
++} NDIS_802_11_CONFIGURATION, *PNDIS_802_11_CONFIGURATION;
++
++
++
++typedef enum _NDIS_802_11_NETWORK_INFRASTRUCTURE
++{
++    Ndis802_11IBSS,
++    Ndis802_11Infrastructure,
++    Ndis802_11AutoUnknown,
++    Ndis802_11InfrastructureMax,     // Not a real value, defined as upper bound
++    Ndis802_11APMode
++} NDIS_802_11_NETWORK_INFRASTRUCTURE, *PNDIS_802_11_NETWORK_INFRASTRUCTURE;
++
++
++
++
++
++typedef struct _NDIS_802_11_FIXED_IEs
++{
++  UCHAR  Timestamp[8];
++  USHORT  BeaconInterval;
++  USHORT  Capabilities;
++} NDIS_802_11_FIXED_IEs, *PNDIS_802_11_FIXED_IEs;
++
++
++
++typedef struct _NDIS_802_11_VARIABLE_IEs
++{
++  UCHAR  ElementID;
++  UCHAR  Length;
++  UCHAR  data[1];
++} NDIS_802_11_VARIABLE_IEs, *PNDIS_802_11_VARIABLE_IEs;
++
++
++
++/*
++
++
++
++Length is the 4 bytes multiples of the sume of
++	sizeof (NDIS_802_11_MAC_ADDRESS) + 2 + sizeof (NDIS_802_11_SSID) + sizeof (ULONG)
+++   sizeof (NDIS_802_11_RSSI) + sizeof (NDIS_802_11_NETWORK_TYPE) + sizeof (NDIS_802_11_CONFIGURATION)
+++   sizeof (NDIS_802_11_RATES_EX) + IELength
++
++Except the IELength, all other fields are fixed length. Therefore, we can define a marco to present the
++partial sum.
++
++*/
++#if 0
++typedef struct _NDIS_WLAN_BSSID_EX
++{
++  ULONG  Length;
++  NDIS_802_11_MAC_ADDRESS  MacAddress;
++  UCHAR  Reserved[2];//[0]: IS beacon frame, [1]:optimum_antenna=>For antenna diversity;
++  NDIS_802_11_SSID  Ssid;
++  ULONG  Privacy;
++  NDIS_802_11_RSSI  Rssi;
++  NDIS_802_11_NETWORK_TYPE  NetworkTypeInUse;
++  NDIS_802_11_CONFIGURATION  Configuration;
++  NDIS_802_11_NETWORK_INFRASTRUCTURE  InfrastructureMode;
++  NDIS_802_11_RATES_EX  SupportedRates;
++  ULONG  IELength;
++  UCHAR  IEs[MAX_IE_SZ];	//(timestamp, beacon interval, and capability information)
++} NDIS_WLAN_BSSID_EX, *PNDIS_WLAN_BSSID_EX;
++
++
++typedef struct _NDIS_802_11_BSSID_LIST_EX
++{
++  ULONG  NumberOfItems;
++  NDIS_WLAN_BSSID_EX  Bssid[1];
++} NDIS_802_11_BSSID_LIST_EX, *PNDIS_802_11_BSSID_LIST_EX;
++#endif
++
++typedef enum _NDIS_802_11_AUTHENTICATION_MODE
++{
++    Ndis802_11AuthModeOpen,
++    Ndis802_11AuthModeShared,
++    Ndis802_11AuthModeAutoSwitch,
++    Ndis802_11AuthModeWPA,
++    Ndis802_11AuthModeWPAPSK,
++    Ndis802_11AuthModeWPANone,
++    Ndis802_11AuthModeMax               // Not a real mode, defined as upper bound
++} NDIS_802_11_AUTHENTICATION_MODE, *PNDIS_802_11_AUTHENTICATION_MODE;
++
++typedef enum _NDIS_802_11_WEP_STATUS
++{
++    Ndis802_11WEPEnabled,
++    Ndis802_11Encryption1Enabled = Ndis802_11WEPEnabled,
++    Ndis802_11WEPDisabled,
++    Ndis802_11EncryptionDisabled = Ndis802_11WEPDisabled,
++    Ndis802_11WEPKeyAbsent,
++    Ndis802_11Encryption1KeyAbsent = Ndis802_11WEPKeyAbsent,
++    Ndis802_11WEPNotSupported,
++    Ndis802_11EncryptionNotSupported = Ndis802_11WEPNotSupported,
++    Ndis802_11Encryption2Enabled,
++    Ndis802_11Encryption2KeyAbsent,
++    Ndis802_11Encryption3Enabled,
++    Ndis802_11Encryption3KeyAbsent
++} NDIS_802_11_WEP_STATUS, *PNDIS_802_11_WEP_STATUS,
++  NDIS_802_11_ENCRYPTION_STATUS, *PNDIS_802_11_ENCRYPTION_STATUS;
++
++
++#define NDIS_802_11_AI_REQFI_CAPABILITIES      1
++#define NDIS_802_11_AI_REQFI_LISTENINTERVAL    2
++#define NDIS_802_11_AI_REQFI_CURRENTAPADDRESS  4
++
++#define NDIS_802_11_AI_RESFI_CAPABILITIES      1
++#define NDIS_802_11_AI_RESFI_STATUSCODE        2
++#define NDIS_802_11_AI_RESFI_ASSOCIATIONID     4
++
++typedef struct _NDIS_802_11_AI_REQFI
++{
++    USHORT Capabilities;
++    USHORT ListenInterval;
++    NDIS_802_11_MAC_ADDRESS  CurrentAPAddress;
++} NDIS_802_11_AI_REQFI, *PNDIS_802_11_AI_REQFI;
++
++typedef struct _NDIS_802_11_AI_RESFI
++{
++    USHORT Capabilities;
++    USHORT StatusCode;
++    USHORT AssociationId;
++} NDIS_802_11_AI_RESFI, *PNDIS_802_11_AI_RESFI;
++
++typedef struct _NDIS_802_11_ASSOCIATION_INFORMATION
++{
++    ULONG                   Length;
++    USHORT                  AvailableRequestFixedIEs;
++    NDIS_802_11_AI_REQFI    RequestFixedIEs;
++    ULONG                   RequestIELength;
++    ULONG                   OffsetRequestIEs;
++    USHORT                  AvailableResponseFixedIEs;
++    NDIS_802_11_AI_RESFI    ResponseFixedIEs;
++    ULONG                   ResponseIELength;
++    ULONG                   OffsetResponseIEs;
++} NDIS_802_11_ASSOCIATION_INFORMATION, *PNDIS_802_11_ASSOCIATION_INFORMATION;
++
++typedef enum _NDIS_802_11_RELOAD_DEFAULTS
++{
++   Ndis802_11ReloadWEPKeys
++} NDIS_802_11_RELOAD_DEFAULTS, *PNDIS_802_11_RELOAD_DEFAULTS;
++
++
++// Key mapping keys require a BSSID
++typedef struct _NDIS_802_11_KEY
++{
++    ULONG           Length;             // Length of this structure
++    ULONG           KeyIndex;           
++    ULONG           KeyLength;          // length of key in bytes
++    NDIS_802_11_MAC_ADDRESS BSSID;
++    NDIS_802_11_KEY_RSC KeyRSC;
++    UCHAR           KeyMaterial[32];     // variable length depending on above field
++} NDIS_802_11_KEY, *PNDIS_802_11_KEY;
++
++typedef struct _NDIS_802_11_REMOVE_KEY
++{
++    ULONG                   Length;        // Length of this structure
++    ULONG                   KeyIndex;           
++    NDIS_802_11_MAC_ADDRESS BSSID;      
++} NDIS_802_11_REMOVE_KEY, *PNDIS_802_11_REMOVE_KEY;
++
++typedef struct _NDIS_802_11_WEP
++{
++    ULONG     Length;        // Length of this structure
++    ULONG     KeyIndex;      // 0 is the per-client key, 1-N are the global keys
++    ULONG     KeyLength;     // length of key in bytes
++    UCHAR     KeyMaterial[16];// variable length depending on above field
++} NDIS_802_11_WEP, *PNDIS_802_11_WEP;
++
++typedef struct _NDIS_802_11_AUTHENTICATION_REQUEST
++{
++    ULONG Length;            // Length of structure
++    NDIS_802_11_MAC_ADDRESS Bssid;
++    ULONG Flags;
++} NDIS_802_11_AUTHENTICATION_REQUEST, *PNDIS_802_11_AUTHENTICATION_REQUEST;
++
++typedef enum _NDIS_802_11_STATUS_TYPE
++{
++	Ndis802_11StatusType_Authentication,
++	Ndis802_11StatusType_MediaStreamMode,
++	Ndis802_11StatusType_PMKID_CandidateList,		
++	Ndis802_11StatusTypeMax    // not a real type, defined as an upper bound
++} NDIS_802_11_STATUS_TYPE, *PNDIS_802_11_STATUS_TYPE;
++
++typedef struct _NDIS_802_11_STATUS_INDICATION
++{
++    NDIS_802_11_STATUS_TYPE StatusType;
++} NDIS_802_11_STATUS_INDICATION, *PNDIS_802_11_STATUS_INDICATION;
++
++// mask for authentication/integrity fields
++#define NDIS_802_11_AUTH_REQUEST_AUTH_FIELDS        0x0f
++#define NDIS_802_11_AUTH_REQUEST_REAUTH			0x01
++#define NDIS_802_11_AUTH_REQUEST_KEYUPDATE		0x02
++#define NDIS_802_11_AUTH_REQUEST_PAIRWISE_ERROR		0x06
++#define NDIS_802_11_AUTH_REQUEST_GROUP_ERROR		0x0E
++
++// MIC check time, 60 seconds.
++#define MIC_CHECK_TIME	60000000
++
++typedef struct _NDIS_802_11_AUTHENTICATION_EVENT
++{
++    NDIS_802_11_STATUS_INDICATION       Status;
++    NDIS_802_11_AUTHENTICATION_REQUEST  Request[1];
++} NDIS_802_11_AUTHENTICATION_EVENT, *PNDIS_802_11_AUTHENTICATION_EVENT;
++        
++typedef struct _NDIS_802_11_TEST
++{
++    ULONG Length;
++    ULONG Type;
++    union
++    {
++        NDIS_802_11_AUTHENTICATION_EVENT AuthenticationEvent;
++        NDIS_802_11_RSSI RssiTrigger;
++    }tt;
++} NDIS_802_11_TEST, *PNDIS_802_11_TEST;
++
++
++#endif //end of #ifdef PLATFORM_LINUX
++
++#ifdef PLATFORM_FREEBSD
++
++#define NDIS_802_11_LENGTH_SSID         32
++#define NDIS_802_11_LENGTH_RATES        8
++#define NDIS_802_11_LENGTH_RATES_EX     16
++
++typedef unsigned char   NDIS_802_11_MAC_ADDRESS[6];
++typedef long    		NDIS_802_11_RSSI;           // in dBm
++typedef unsigned char   NDIS_802_11_RATES[NDIS_802_11_LENGTH_RATES];        // Set of 8 data rates
++typedef unsigned char   NDIS_802_11_RATES_EX[NDIS_802_11_LENGTH_RATES_EX];  // Set of 16 data rates
++
++
++typedef  ULONG  NDIS_802_11_KEY_INDEX;
++typedef unsigned long long NDIS_802_11_KEY_RSC;
++
++
++typedef struct _NDIS_802_11_SSID
++{
++  ULONG  SsidLength;
++  UCHAR  Ssid[32];
++} NDIS_802_11_SSID, *PNDIS_802_11_SSID;
++
++typedef enum _NDIS_802_11_NETWORK_TYPE
++{
++    Ndis802_11FH,
++    Ndis802_11DS,
++    Ndis802_11OFDM5,
++    Ndis802_11OFDM24,
++    Ndis802_11NetworkTypeMax    // not a real type, defined as an upper bound
++} NDIS_802_11_NETWORK_TYPE, *PNDIS_802_11_NETWORK_TYPE;
++
++typedef struct _NDIS_802_11_CONFIGURATION_FH
++{
++    ULONG           Length;             // Length of structure
++    ULONG           HopPattern;         // As defined by 802.11, MSB set
++    ULONG           HopSet;             // to one if non-802.11
++    ULONG           DwellTime;          // units are Kusec
++} NDIS_802_11_CONFIGURATION_FH, *PNDIS_802_11_CONFIGURATION_FH;
++ 
++
++/*
++	FW will only save the channel number in DSConfig.
++	ODI Handler will convert the channel number to freq. number.	
++*/
++typedef struct _NDIS_802_11_CONFIGURATION
++{
++    ULONG           Length;             // Length of structure
++    ULONG           BeaconPeriod;       // units are Kusec
++    ULONG           ATIMWindow;         // units are Kusec
++    ULONG           DSConfig;           // Frequency, units are kHz
++    NDIS_802_11_CONFIGURATION_FH    FHConfig;
++} NDIS_802_11_CONFIGURATION, *PNDIS_802_11_CONFIGURATION;
++
++
++
++typedef enum _NDIS_802_11_NETWORK_INFRASTRUCTURE
++{
++    Ndis802_11IBSS,
++    Ndis802_11Infrastructure,
++    Ndis802_11AutoUnknown,
++    Ndis802_11InfrastructureMax,     // Not a real value, defined as upper bound
++    Ndis802_11APMode
++} NDIS_802_11_NETWORK_INFRASTRUCTURE, *PNDIS_802_11_NETWORK_INFRASTRUCTURE;
++
++
++
++
++
++typedef struct _NDIS_802_11_FIXED_IEs
++{
++  UCHAR  Timestamp[8];
++  USHORT  BeaconInterval;
++  USHORT  Capabilities;
++} NDIS_802_11_FIXED_IEs, *PNDIS_802_11_FIXED_IEs;
++
++
++
++typedef struct _NDIS_802_11_VARIABLE_IEs
++{
++  UCHAR  ElementID;
++  UCHAR  Length;
++  UCHAR  data[1];
++} NDIS_802_11_VARIABLE_IEs, *PNDIS_802_11_VARIABLE_IEs;
++
++
++
++/*
++
++
++
++Length is the 4 bytes multiples of the sume of
++	sizeof (NDIS_802_11_MAC_ADDRESS) + 2 + sizeof (NDIS_802_11_SSID) + sizeof (ULONG)
+++   sizeof (NDIS_802_11_RSSI) + sizeof (NDIS_802_11_NETWORK_TYPE) + sizeof (NDIS_802_11_CONFIGURATION)
+++   sizeof (NDIS_802_11_RATES_EX) + IELength
++
++Except the IELength, all other fields are fixed length. Therefore, we can define a marco to present the
++partial sum.
++
++*/
++#if 0
++typedef struct _NDIS_WLAN_BSSID_EX
++{
++  ULONG  Length;
++  NDIS_802_11_MAC_ADDRESS  MacAddress;
++  UCHAR  Reserved[2];//[0]: IS beacon frame, [1]:optimum_antenna=>For antenna diversity;
++  NDIS_802_11_SSID  Ssid;
++  ULONG  Privacy;
++  NDIS_802_11_RSSI  Rssi;
++  NDIS_802_11_NETWORK_TYPE  NetworkTypeInUse;
++  NDIS_802_11_CONFIGURATION  Configuration;
++  NDIS_802_11_NETWORK_INFRASTRUCTURE  InfrastructureMode;
++  NDIS_802_11_RATES_EX  SupportedRates;
++  ULONG  IELength;
++  UCHAR  IEs[MAX_IE_SZ];	//(timestamp, beacon interval, and capability information)
++} NDIS_WLAN_BSSID_EX, *PNDIS_WLAN_BSSID_EX;
++
++
++typedef struct _NDIS_802_11_BSSID_LIST_EX
++{
++  ULONG  NumberOfItems;
++  NDIS_WLAN_BSSID_EX  Bssid[1];
++} NDIS_802_11_BSSID_LIST_EX, *PNDIS_802_11_BSSID_LIST_EX;
++#endif
++
++typedef enum _NDIS_802_11_AUTHENTICATION_MODE
++{
++    Ndis802_11AuthModeOpen,
++    Ndis802_11AuthModeShared,
++    Ndis802_11AuthModeAutoSwitch,
++    Ndis802_11AuthModeWPA,
++    Ndis802_11AuthModeWPAPSK,
++    Ndis802_11AuthModeWPANone,
++    Ndis802_11AuthModeMax               // Not a real mode, defined as upper bound
++} NDIS_802_11_AUTHENTICATION_MODE, *PNDIS_802_11_AUTHENTICATION_MODE;
++
++typedef enum _NDIS_802_11_WEP_STATUS
++{
++    Ndis802_11WEPEnabled,
++    Ndis802_11Encryption1Enabled = Ndis802_11WEPEnabled,
++    Ndis802_11WEPDisabled,
++    Ndis802_11EncryptionDisabled = Ndis802_11WEPDisabled,
++    Ndis802_11WEPKeyAbsent,
++    Ndis802_11Encryption1KeyAbsent = Ndis802_11WEPKeyAbsent,
++    Ndis802_11WEPNotSupported,
++    Ndis802_11EncryptionNotSupported = Ndis802_11WEPNotSupported,
++    Ndis802_11Encryption2Enabled,
++    Ndis802_11Encryption2KeyAbsent,
++    Ndis802_11Encryption3Enabled,
++    Ndis802_11Encryption3KeyAbsent
++} NDIS_802_11_WEP_STATUS, *PNDIS_802_11_WEP_STATUS,
++  NDIS_802_11_ENCRYPTION_STATUS, *PNDIS_802_11_ENCRYPTION_STATUS;
++
++
++#define NDIS_802_11_AI_REQFI_CAPABILITIES      1
++#define NDIS_802_11_AI_REQFI_LISTENINTERVAL    2
++#define NDIS_802_11_AI_REQFI_CURRENTAPADDRESS  4
++
++#define NDIS_802_11_AI_RESFI_CAPABILITIES      1
++#define NDIS_802_11_AI_RESFI_STATUSCODE        2
++#define NDIS_802_11_AI_RESFI_ASSOCIATIONID     4
++
++typedef struct _NDIS_802_11_AI_REQFI
++{
++    USHORT Capabilities;
++    USHORT ListenInterval;
++    NDIS_802_11_MAC_ADDRESS  CurrentAPAddress;
++} NDIS_802_11_AI_REQFI, *PNDIS_802_11_AI_REQFI;
++
++typedef struct _NDIS_802_11_AI_RESFI
++{
++    USHORT Capabilities;
++    USHORT StatusCode;
++    USHORT AssociationId;
++} NDIS_802_11_AI_RESFI, *PNDIS_802_11_AI_RESFI;
++
++typedef struct _NDIS_802_11_ASSOCIATION_INFORMATION
++{
++    ULONG                   Length;
++    USHORT                  AvailableRequestFixedIEs;
++    NDIS_802_11_AI_REQFI    RequestFixedIEs;
++    ULONG                   RequestIELength;
++    ULONG                   OffsetRequestIEs;
++    USHORT                  AvailableResponseFixedIEs;
++    NDIS_802_11_AI_RESFI    ResponseFixedIEs;
++    ULONG                   ResponseIELength;
++    ULONG                   OffsetResponseIEs;
++} NDIS_802_11_ASSOCIATION_INFORMATION, *PNDIS_802_11_ASSOCIATION_INFORMATION;
++
++typedef enum _NDIS_802_11_RELOAD_DEFAULTS
++{
++   Ndis802_11ReloadWEPKeys
++} NDIS_802_11_RELOAD_DEFAULTS, *PNDIS_802_11_RELOAD_DEFAULTS;
++
++
++// Key mapping keys require a BSSID
++typedef struct _NDIS_802_11_KEY
++{
++    ULONG           Length;             // Length of this structure
++    ULONG           KeyIndex;           
++    ULONG           KeyLength;          // length of key in bytes
++    NDIS_802_11_MAC_ADDRESS BSSID;
++    NDIS_802_11_KEY_RSC KeyRSC;
++    UCHAR           KeyMaterial[32];     // variable length depending on above field
++} NDIS_802_11_KEY, *PNDIS_802_11_KEY;
++
++typedef struct _NDIS_802_11_REMOVE_KEY
++{
++    ULONG                   Length;        // Length of this structure
++    ULONG                   KeyIndex;           
++    NDIS_802_11_MAC_ADDRESS BSSID;      
++} NDIS_802_11_REMOVE_KEY, *PNDIS_802_11_REMOVE_KEY;
++
++typedef struct _NDIS_802_11_WEP
++{
++    ULONG     Length;        // Length of this structure
++    ULONG     KeyIndex;      // 0 is the per-client key, 1-N are the global keys
++    ULONG     KeyLength;     // length of key in bytes
++    UCHAR     KeyMaterial[16];// variable length depending on above field
++} NDIS_802_11_WEP, *PNDIS_802_11_WEP;
++
++typedef struct _NDIS_802_11_AUTHENTICATION_REQUEST
++{
++    ULONG Length;            // Length of structure
++    NDIS_802_11_MAC_ADDRESS Bssid;
++    ULONG Flags;
++} NDIS_802_11_AUTHENTICATION_REQUEST, *PNDIS_802_11_AUTHENTICATION_REQUEST;
++
++typedef enum _NDIS_802_11_STATUS_TYPE
++{
++	Ndis802_11StatusType_Authentication,
++	Ndis802_11StatusType_MediaStreamMode,
++	Ndis802_11StatusType_PMKID_CandidateList,		
++	Ndis802_11StatusTypeMax    // not a real type, defined as an upper bound
++} NDIS_802_11_STATUS_TYPE, *PNDIS_802_11_STATUS_TYPE;
++
++typedef struct _NDIS_802_11_STATUS_INDICATION
++{
++    NDIS_802_11_STATUS_TYPE StatusType;
++} NDIS_802_11_STATUS_INDICATION, *PNDIS_802_11_STATUS_INDICATION;
++
++// mask for authentication/integrity fields
++#define NDIS_802_11_AUTH_REQUEST_AUTH_FIELDS        0x0f
++#define NDIS_802_11_AUTH_REQUEST_REAUTH			0x01
++#define NDIS_802_11_AUTH_REQUEST_KEYUPDATE		0x02
++#define NDIS_802_11_AUTH_REQUEST_PAIRWISE_ERROR		0x06
++#define NDIS_802_11_AUTH_REQUEST_GROUP_ERROR		0x0E
++
++// MIC check time, 60 seconds.
++#define MIC_CHECK_TIME	60000000
++
++typedef struct _NDIS_802_11_AUTHENTICATION_EVENT
++{
++    NDIS_802_11_STATUS_INDICATION       Status;
++    NDIS_802_11_AUTHENTICATION_REQUEST  Request[1];
++} NDIS_802_11_AUTHENTICATION_EVENT, *PNDIS_802_11_AUTHENTICATION_EVENT;
++        
++typedef struct _NDIS_802_11_TEST
++{
++    ULONG Length;
++    ULONG Type;
++    union
++    {
++        NDIS_802_11_AUTHENTICATION_EVENT AuthenticationEvent;
++        NDIS_802_11_RSSI RssiTrigger;
++    }tt;
++} NDIS_802_11_TEST, *PNDIS_802_11_TEST;
++
++
++#endif //PLATFORM_FREEBSD
++#ifndef Ndis802_11APMode
++#define Ndis802_11APMode (Ndis802_11InfrastructureMax+1)
++#endif
++
++typedef struct _WLAN_PHY_INFO
++{
++	u8	SignalStrength;//(in percentage)
++  	u8	SignalQuality;//(in percentage)
++  	u8	Optimum_antenna;  //for Antenna diversity
++  	u8  	Reserved_0;
++}WLAN_PHY_INFO,*PWLAN_PHY_INFO;
++
++/* temporally add #pragma pack for structure alignment issue of
++*   WLAN_BSSID_EX and get_WLAN_BSSID_EX_sz()
++*/
++#ifdef PLATFORM_WINDOWS
++#pragma pack(push)
++#pragma pack(1)
++#endif
++typedef struct _WLAN_BSSID_EX
++{
++  ULONG  Length;
++  NDIS_802_11_MAC_ADDRESS  MacAddress;
++  UCHAR  Reserved[2];//[0]: IS beacon frame
++  NDIS_802_11_SSID  Ssid;
++  ULONG  Privacy;
++  NDIS_802_11_RSSI  Rssi;//(in dBM,raw data ,get from PHY)
++  NDIS_802_11_NETWORK_TYPE  NetworkTypeInUse;
++  NDIS_802_11_CONFIGURATION  Configuration;
++  NDIS_802_11_NETWORK_INFRASTRUCTURE  InfrastructureMode;
++  NDIS_802_11_RATES_EX  SupportedRates;
++  WLAN_PHY_INFO	PhyInfo;
++  ULONG  IELength;
++  UCHAR  IEs[MAX_IE_SZ];	//(timestamp, beacon interval, and capability information)
++} 
++#ifndef PLATFORM_WINDOWS
++__attribute__((packed))
++#endif
++WLAN_BSSID_EX, *PWLAN_BSSID_EX;
++#ifdef PLATFORM_WINDOWS
++#pragma pack(pop)
++#endif
++
++__inline  static uint get_WLAN_BSSID_EX_sz(WLAN_BSSID_EX *bss)
++{
++	return (sizeof(WLAN_BSSID_EX) - MAX_IE_SZ + bss->IELength);
++}
++
++struct	wlan_network {
++	_list	list;	
++	int	network_type;	//refer to ieee80211.h for WIRELESS_11A/B/G
++	int	fixed;			// set to fixed when not to be removed as site-surveying
++	unsigned long	last_scanned; //timestamp for the network
++	int	aid;			//will only be valid when a BSS is joinned.
++	int	join_res;
++	WLAN_BSSID_EX	network; //must be the last item
++#ifdef PLATFORM_WINDOWS	
++	unsigned char  iebuf[MAX_IE_SZ];
++#endif
++
++};
++
++enum VRTL_CARRIER_SENSE
++{
++    DISABLE_VCS,	
++    ENABLE_VCS,	
++    AUTO_VCS
++};
++
++enum VCS_TYPE
++{
++    NONE_VCS,	
++    RTS_CTS,
++    CTS_TO_SELF 
++};
++
++
++
++
++#define PWR_CAM 0
++#define PWR_MINPS 1
++#define PWR_MAXPS 2
++#define PWR_UAPSD 3
++#define PWR_VOIP 4
++
++
++enum UAPSD_MAX_SP
++{
++	NO_LIMIT,
++       TWO_MSDU,
++       FOUR_MSDU,
++       SIX_MSDU
++};
++
++
++//john
++#define NUM_PRE_AUTH_KEY 16
++#define NUM_PMKID_CACHE NUM_PRE_AUTH_KEY
++
++/*
++* 	WPA2
++*/
++
++#ifndef PLATFORM_OS_CE
++typedef struct _PMKID_CANDIDATE {
++    NDIS_802_11_MAC_ADDRESS BSSID;
++    ULONG Flags;
++} PMKID_CANDIDATE, *PPMKID_CANDIDATE;
++
++typedef struct _NDIS_802_11_PMKID_CANDIDATE_LIST
++{
++    ULONG Version;       // Version of the structure
++    ULONG NumCandidates; // No. of pmkid candidates
++    PMKID_CANDIDATE CandidateList[1];
++} NDIS_802_11_PMKID_CANDIDATE_LIST, *PNDIS_802_11_PMKID_CANDIDATE_LIST;
++
++
++typedef struct _NDIS_802_11_AUTHENTICATION_ENCRYPTION
++{
++	NDIS_802_11_AUTHENTICATION_MODE AuthModeSupported;
++	NDIS_802_11_ENCRYPTION_STATUS EncryptStatusSupported;
++	
++} NDIS_802_11_AUTHENTICATION_ENCRYPTION, *PNDIS_802_11_AUTHENTICATION_ENCRYPTION;
++
++typedef struct _NDIS_802_11_CAPABILITY 
++{
++	ULONG  Length;
++	ULONG  Version;
++	ULONG  NoOfPMKIDs;
++	ULONG  NoOfAuthEncryptPairsSupported;
++	NDIS_802_11_AUTHENTICATION_ENCRYPTION AuthenticationEncryptionSupported[1];
++	
++} NDIS_802_11_CAPABILITY, *PNDIS_802_11_CAPABILITY;
++#endif
++
++
++#endif //#ifndef WLAN_BSSDEF_H_
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/include/xmit_osdep.h linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/xmit_osdep.h
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/include/xmit_osdep.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/include/xmit_osdep.h	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,95 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#ifndef __XMIT_OSDEP_H_
++#define __XMIT_OSDEP_H_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++
++struct pkt_file {
++	_pkt *pkt;
++	SIZE_T pkt_len;	 //the remainder length of the open_file
++	_buffer *cur_buffer;
++	u8 *buf_start;
++	u8 *cur_addr;
++	SIZE_T buf_len;
++};
++
++#ifdef PLATFORM_WINDOWS
++
++#ifdef PLATFORM_OS_XP
++#ifdef CONFIG_USB_HCI
++#include <usb.h>
++#include <usbdlib.h>
++#include <usbioctl.h>
++#endif
++#endif
++
++#define NR_XMITFRAME     128
++
++#define ETH_ALEN	6
++
++extern NDIS_STATUS rtw_xmit_entry(
++IN _nic_hdl		cnxt,
++IN NDIS_PACKET		*pkt,
++IN UINT				flags
++);
++
++#endif
++
++#ifdef PLATFORM_FREEBSD
++#define NR_XMITFRAME	256
++extern int rtw_xmit_entry(_pkt *pkt, _nic_hdl pnetdev);
++extern void rtw_xmit_entry_wrap (struct ifnet * pifp);
++#endif //PLATFORM_FREEBSD
++
++#ifdef PLATFORM_LINUX
++
++#define NR_XMITFRAME	256
++
++struct xmit_priv;
++struct pkt_attrib;
++struct sta_xmit_priv;
++struct xmit_frame;
++struct xmit_buf;
++
++extern int _rtw_xmit_entry(_pkt *pkt, _nic_hdl pnetdev);
++extern int rtw_xmit_entry(_pkt *pkt, _nic_hdl pnetdev);
++
++#endif
++
++void rtw_os_xmit_schedule(_adapter *padapter);
++
++int rtw_os_xmit_resource_alloc(_adapter *padapter, struct xmit_buf *pxmitbuf,u32 alloc_sz);
++void rtw_os_xmit_resource_free(_adapter *padapter, struct xmit_buf *pxmitbuf,u32 free_sz);
++
++extern void rtw_set_tx_chksum_offload(_pkt *pkt, struct pkt_attrib *pattrib);
++
++extern uint rtw_remainder_len(struct pkt_file *pfile);
++extern void _rtw_open_pktfile(_pkt *pkt, struct pkt_file *pfile);
++extern uint _rtw_pktfile_read (struct pkt_file *pfile, u8 *rmem, uint rlen);
++extern sint rtw_endofpktfile (struct pkt_file *pfile);
++
++extern void rtw_os_pkt_complete(_adapter *padapter, _pkt *pkt);
++extern void rtw_os_xmit_complete(_adapter *padapter, struct xmit_frame *pxframe);
++
++#endif //__XMIT_OSDEP_H_
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/Kconfig linux-raspberry-pi/drivers/net/wireless/rtl8192cu/Kconfig
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/Kconfig	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/Kconfig	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,8 @@
++config RTL8192CU
++	tristate "Realtek 8192C USB WiFi"
++	depends on USB
++	select WIRELESS_EXT
++	select WEXT_PRIV
++	---help---
++	  Enable wireless network adapters based on Realtek RTL8192C chipset family, such as EDUP nano series
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/Makefile linux-raspberry-pi/drivers/net/wireless/rtl8192cu/Makefile
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/Makefile	2013-12-29 10:41:32.000000000 +0100
+@@ -0,0 +1,620 @@
++EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS)
++EXTRA_CFLAGS += -O1
++#EXTRA_CFLAGS += -O3
++#EXTRA_CFLAGS += -Wall
++#EXTRA_CFLAGS += -Wextra
++#EXTRA_CFLAGS += -Werror
++#EXTRA_CFLAGS += -pedantic
++#EXTRA_CFLAGS += -Wshadow -Wpointer-arith -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes
++
++EXTRA_CFLAGS += -Wno-unused-variable
++EXTRA_CFLAGS += -Wno-unused-value
++EXTRA_CFLAGS += -Wno-unused-label
++EXTRA_CFLAGS += -Wno-unused-parameter
++EXTRA_CFLAGS += -Wno-unused-function
++EXTRA_CFLAGS += -Wno-unused
++
++EXTRA_CFLAGS += -Wno-uninitialized
++
++EXTRA_CFLAGS += -I$(src)/include
++
++CONFIG_AUTOCFG_CP = n
++
++CONFIG_RTL8192C = y
++CONFIG_RTL8192D = n
++CONFIG_RTL8723A = n
++
++CONFIG_USB_HCI = y
++CONFIG_PCI_HCI = n
++CONFIG_SDIO_HCI = n
++
++CONFIG_MP_INCLUDED = n
++CONFIG_POWER_SAVING = y
++CONFIG_USB_AUTOSUSPEND = n
++CONFIG_HW_PWRP_DETECTION = n
++CONFIG_WIFI_TEST = n
++CONFIG_BT_COEXISTENCE = n
++CONFIG_RTL8192CU_REDEFINE_1X1 = n
++CONFIG_INTEL_WIDI = n
++CONFIG_WAKE_ON_WLAN = n
++
++CONFIG_PLATFORM_I386_PC = n
++CONFIG_PLATFORM_TI_AM3517 = n
++CONFIG_PLATFORM_ANDROID_X86 = n
++CONFIG_PLATFORM_JB_X86 = n
++CONFIG_PLATFORM_ARM_S3C2K4 = n
++CONFIG_PLATFORM_ARM_PXA2XX = n
++CONFIG_PLATFORM_ARM_S3C6K4 = n
++CONFIG_PLATFORM_MIPS_RMI = n
++CONFIG_PLATFORM_RTD2880B = n
++CONFIG_PLATFORM_MIPS_AR9132 = n
++CONFIG_PLATFORM_RTK_DMP = n
++CONFIG_PLATFORM_MIPS_PLM = n
++CONFIG_PLATFORM_MSTAR389 = n
++CONFIG_PLATFORM_MT53XX = n
++CONFIG_PLATFORM_ARM_MX51_241H = n
++CONFIG_PLATFORM_FS_MX61 = n
++CONFIG_PLATFORM_ACTIONS_ATJ227X = n
++CONFIG_PLATFORM_TEGRA3_CARDHU = n
++CONFIG_PLATFORM_TEGRA4_DALMORE = n
++CONFIG_PLATFORM_ARM_TCC8900 = n
++CONFIG_PLATFORM_ARM_TCC8920 = n
++CONFIG_PLATFORM_ARM_TCC8920_JB42 = n
++CONFIG_PLATFORM_ARM_RK2818 = n
++CONFIG_PLATFORM_ARM_TI_PANDA = n
++CONFIG_PLATFORM_MIPS_JZ4760 = n
++CONFIG_PLATFORM_DMP_PHILIPS = n
++CONFIG_PLATFORM_TI_DM365 = n
++CONFIG_PLATFORM_MN10300 = n
++CONFIG_PLATFORM_MSTAR_TITANIA12 = n
++CONFIG_PLATFORM_MSTAR_A3 = n
++CONFIG_PLATFORM_ARM_SUNxI = n
++CONFIG_PLATFORM_ARM_SUN6I = n
++
++CONFIG_DRVEXT_MODULE = n
++
++export TopDIR ?= $(shell pwd)
++
++
++ifeq ($(CONFIG_RTL8192C), y)
++
++RTL871X = rtl8192c
++
++ifeq ($(CONFIG_USB_HCI), y)
++MODULE_NAME = 8192cu
++FW_FILES := hal/$(RTL871X)/usb/Hal8192CUHWImg.o
++ifneq ($(CONFIG_WAKE_ON_WLAN), n)
++FW_FILES += hal/$(RTL871X)/usb/Hal8192CUHWImg_wowlan.o
++endif
++endif
++ifeq ($(CONFIG_PCI_HCI), y)
++MODULE_NAME = 8192ce
++FW_FILES := hal/$(RTL871X)/pci/Hal8192CEHWImg.o
++endif
++
++CHIP_FILES := \
++	hal/$(RTL871X)/$(RTL871X)_sreset.o \
++	hal/$(RTL871X)/$(RTL871X)_xmit.o
++CHIP_FILES += $(FW_FILES)
++endif
++
++ifeq ($(CONFIG_RTL8192D), y)
++
++RTL871X = rtl8192d
++
++ifeq ($(CONFIG_USB_HCI), y)
++MODULE_NAME = 8192du
++FW_FILES := hal/$(RTL871X)/usb/Hal8192DUHWImg.o
++ifneq ($(CONFIG_WAKE_ON_WLAN), n)
++FW_FILES += hal/$(RTL871X)/usb/Hal8192DUHWImg_wowlan.o
++endif
++endif
++ifeq ($(CONFIG_PCI_HCI), y)
++MODULE_NAME = 8192de
++FW_FILES := hal/$(RTL871X)/pci/Hal8192DEHWImg.o
++endif
++
++CHIP_FILES := \
++	hal/$(RTL871X)/$(RTL871X)_xmit.o
++CHIP_FILES += $(FW_FILES)
++endif
++
++ifeq ($(CONFIG_RTL8723A), y)
++
++RTL871X = rtl8723a
++
++ifeq ($(CONFIG_SDIO_HCI), y)
++MODULE_NAME = 8723as
++FW_FILES := hal/$(RTL871X)/sdio/Hal8723SHWImg.o
++endif
++
++ifeq ($(CONFIG_USB_HCI), y)
++MODULE_NAME = 8723au
++FW_FILES := hal/$(RTL871X)/usb/Hal8723UHWImg.o
++endif
++
++ifeq ($(CONFIG_PCI_HCI), y)
++MODULE_NAME = 8723ae
++FW_FILES := hal/$(RTL871X)/pci/Hal8723EHWImg.o
++endif
++
++PWRSEQ_FILES := hal/HalPwrSeqCmd.o \
++				hal/$(RTL871X)/Hal8723PwrSeq.o
++
++CHIP_FILES += $(FW_FILES) $(PWRSEQ_FILES)
++
++endif
++
++ifeq ($(CONFIG_SDIO_HCI), y)
++HCI_NAME = sdio
++endif
++
++ifeq ($(CONFIG_USB_HCI), y)
++HCI_NAME = usb
++endif
++
++ifeq ($(CONFIG_PCI_HCI), y)
++HCI_NAME = pci
++endif
++
++
++_OS_INTFS_FILES :=	os_dep/osdep_service.o \
++			os_dep/linux/os_intfs.o \
++			os_dep/linux/$(HCI_NAME)_intf.o \
++			os_dep/linux/$(HCI_NAME)_ops_linux.o \
++			os_dep/linux/ioctl_linux.o \
++			os_dep/linux/xmit_linux.o \
++			os_dep/linux/mlme_linux.o \
++			os_dep/linux/recv_linux.o \
++			os_dep/linux/ioctl_cfg80211.o \
++			os_dep/linux/rtw_android.o
++
++
++_HAL_INTFS_FILES :=	hal/hal_intf.o \
++			hal/hal_com.o \
++			hal/dm.o \
++			hal/$(RTL871X)/$(RTL871X)_hal_init.o \
++			hal/$(RTL871X)/$(RTL871X)_phycfg.o \
++			hal/$(RTL871X)/$(RTL871X)_rf6052.o \
++			hal/$(RTL871X)/$(RTL871X)_dm.o \
++			hal/$(RTL871X)/$(RTL871X)_rxdesc.o \
++			hal/$(RTL871X)/$(RTL871X)_cmd.o \
++			hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_halinit.o \
++			hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_led.o \
++			hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_xmit.o \
++			hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_recv.o
++
++ifeq ($(CONFIG_SDIO_HCI), y)
++_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
++else
++_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops_linux.o
++endif
++
++ifeq ($(CONFIG_MP_INCLUDED), y)
++_HAL_INTFS_FILES += hal/$(RTL871X)/$(RTL871X)_mp.o
++endif
++
++_HAL_INTFS_FILES += $(CHIP_FILES)
++
++
++ifeq ($(CONFIG_AUTOCFG_CP), y)
++$(shell cp $(TopDIR)/autoconf_$(RTL871X)_$(HCI_NAME)_linux.h $(TopDIR)/include/autoconf.h)
++endif
++
++
++ifeq ($(CONFIG_USB_HCI), y)
++ifeq ($(CONFIG_USB_AUTOSUSPEND), y)
++EXTRA_CFLAGS += -DCONFIG_USB_AUTOSUSPEND
++endif
++endif
++
++ifeq ($(CONFIG_POWER_SAVING), y)
++EXTRA_CFLAGS += -DCONFIG_POWER_SAVING
++endif
++
++ifeq ($(CONFIG_HW_PWRP_DETECTION), y)
++EXTRA_CFLAGS += -DCONFIG_HW_PWRP_DETECTION
++endif
++
++ifeq ($(CONFIG_WIFI_TEST), y)
++EXTRA_CFLAGS += -DCONFIG_WIFI_TEST
++endif
++
++ifeq ($(CONFIG_BT_COEXISTENCE), y)
++EXTRA_CFLAGS += -DCONFIG_BT_COEXISTENCE
++endif
++
++ifeq ($(CONFIG_RTL8192CU_REDEFINE_1X1), y)
++EXTRA_CFLAGS += -DRTL8192C_RECONFIG_TO_1T1R
++endif
++
++ifeq ($(CONFIG_WAKE_ON_WLAN), y)
++EXTRA_CFLAGS += -DCONFIG_WAKE_ON_WLAN
++endif
++
++ifeq ($(CONFIG_INTEL_WIDI), y)
++EXTRA_CFLAGS += -DCONFIG_INTEL_WIDI
++endif
++
++ifeq ($(CONFIG_PLATFORM_I386_PC), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
++SUBARCH := $(shell uname -m | sed -e s/i.86/i386/)
++ARCH ?= $(SUBARCH)
++CROSS_COMPILE ?=
++KVER  := $(shell uname -r)
++KSRC := /lib/modules/$(KVER)/build
++MODDESTDIR := /lib/modules/$(KVER)/kernel/drivers/net/wireless/
++INSTALL_PREFIX :=
++endif
++
++ifeq ($(CONFIG_PLATFORM_TI_AM3517), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_ANDROID -DCONFIG_PLATFORM_SHUTTLE
++CROSS_COMPILE := arm-eabi-
++KSRC := $(shell pwd)/../../../Android/kernel
++ARCH := arm
++endif
++
++ifeq ($(CONFIG_PLATFORM_MSTAR_TITANIA12), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_MSTAR -DCONFIG_PLATFORM_MSTAR_TITANIA12
++ARCH:=mips
++CROSS_COMPILE:= /usr/src/Mstar_kernel/mips-4.3/bin/mips-linux-gnu-
++KVER:= 2.6.28.9
++KSRC:= /usr/src/Mstar_kernel/2.6.28.9/
++endif
++
++ifeq ($(CONFIG_PLATFORM_MSTAR_A3), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_MSTAR -DCONFIG_PLATFORM_MSTAR_A3
++ARCH:=arm
++CROSS_COMPILE:= arm-none-linux-gnueabi-
++KVER:= 2.6.35.11
++KSRC:= /home/gary/PERFORCE/THEALE/RedLion/2.6.35.11/
++MODULE_NAME = wlan
++endif
++
++ifeq ($(CONFIG_PLATFORM_ANDROID_X86), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
++SUBARCH := $(shell uname -m | sed -e s/i.86/i386/)
++ARCH := $(SUBARCH)
++CROSS_COMPILE := /media/DATA-2/android-x86/ics-x86_20120130/prebuilt/linux-x86/toolchain/i686-unknown-linux-gnu-4.2.1/bin/i686-unknown-linux-gnu-
++KSRC := /media/DATA-2/android-x86/ics-x86_20120130/out/target/product/generic_x86/obj/kernel
++MODULE_NAME :=wlan
++endif
++
++ifeq ($(CONFIG_PLATFORM_JB_X86), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
++EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
++EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
++EXTRA_CFLAGS += -DCONFIG_P2P_IPS
++SUBARCH := $(shell uname -m | sed -e s/i.86/i386/)
++ARCH := $(SUBARCH)
++CROSS_COMPILE := /home/android_sdk/android-x86_JB/prebuilts/gcc/linux-x86/x86/i686-linux-android-4.7/bin/i686-linux-android-
++KSRC := /home/android_sdk/android-x86_JB/out/target/product/x86/obj/kernel/
++MODULE_NAME :=wlan
++endif
++
++ifeq ($(CONFIG_PLATFORM_ARM_PXA2XX), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
++ARCH := arm
++CROSS_COMPILE := arm-none-linux-gnueabi-
++KVER  := 2.6.34.1
++KSRC ?= /usr/src/linux-2.6.34.1
++endif
++
++ifeq ($(CONFIG_PLATFORM_ARM_S3C2K4), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
++ARCH := arm
++CROSS_COMPILE := arm-linux-
++KVER  := 2.6.24.7_$(ARCH)
++KSRC := /usr/src/kernels/linux-$(KVER)
++endif
++
++ifeq ($(CONFIG_PLATFORM_ARM_S3C6K4), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
++ARCH := arm
++CROSS_COMPILE := arm-none-linux-gnueabi-
++KVER  := 2.6.34.1
++KSRC ?= /usr/src/linux-2.6.34.1
++endif
++
++ifeq ($(CONFIG_PLATFORM_RTD2880B), y)
++EXTRA_CFLAGS += -DCONFIG_BIG_ENDIAN -DCONFIG_PLATFORM_RTD2880B
++ARCH:=
++CROSS_COMPILE:=
++KVER:=
++KSRC:=
++endif
++
++ifeq ($(CONFIG_PLATFORM_MIPS_RMI), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
++ARCH:=mips
++CROSS_COMPILE:=mipsisa32r2-uclibc-
++KVER:=
++KSRC:= /root/work/kernel_realtek
++endif
++
++ifeq ($(CONFIG_PLATFORM_MIPS_PLM), y)
++EXTRA_CFLAGS += -DCONFIG_BIG_ENDIAN
++ARCH:=mips
++CROSS_COMPILE:=mipsisa32r2-uclibc-
++KVER:=
++KSRC:= /root/work/kernel_realtek
++endif
++
++ifeq ($(CONFIG_PLATFORM_MSTAR389), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_MSTAR389
++ARCH:=mips
++CROSS_COMPILE:= mips-linux-gnu-
++KVER:= 2.6.28.10
++KSRC:= /home/mstar/mstar_linux/2.6.28.9/
++endif
++
++ifeq ($(CONFIG_PLATFORM_MIPS_AR9132), y)
++EXTRA_CFLAGS += -DCONFIG_BIG_ENDIAN
++ARCH := mips
++CROSS_COMPILE := mips-openwrt-linux-
++KSRC := /home/alex/test_openwrt/tmp/linux-2.6.30.9
++endif
++
++ifeq ($(CONFIG_PLATFORM_DMP_PHILIPS), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DRTK_DMP_PLATFORM
++ARCH := mips
++#CROSS_COMPILE:=/usr/local/msdk-4.3.6-mips-EL-2.6.12.6-0.9.30.3/bin/mipsel-linux-
++CROSS_COMPILE:=/usr/local/toolchain_mipsel/bin/mipsel-linux-
++KSRC ?=/usr/local/Jupiter/linux-2.6.12
++endif
++
++ifeq ($(CONFIG_PLATFORM_RTK_DMP), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DRTK_DMP_PLATFORM
++ARCH:=mips
++CROSS_COMPILE:=mipsel-linux-
++KVER:=
++KSRC ?= /usr/src/DMP_Kernel/jupiter/linux-2.6.12
++endif
++
++ifeq ($(CONFIG_PLATFORM_MT53XX), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_MT53XX
++ARCH:= arm
++CROSS_COMPILE:= arm11_mtk_le-
++KVER:= 2.6.27
++KSRC?= /proj/mtk00802/BD_Compare/BDP/Dev/BDP_V301/BDP_Linux/linux-2.6.27
++endif
++
++ifeq ($(CONFIG_PLATFORM_ARM_MX51_241H), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_WISTRON_PLATFORM
++ARCH := arm
++CROSS_COMPILE := /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-
++KVER  := 2.6.31
++KSRC ?= /lib/modules/2.6.31-770-g0e46b52/source
++endif
++
++ifeq ($(CONFIG_PLATFORM_FS_MX61), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN 
++ARCH := arm
++CROSS_COMPILE := /home/share/CusEnv/FreeScale/arm-eabi-4.4.3/bin/arm-eabi-
++KSRC ?= /home/share/CusEnv/FreeScale/FS_kernel_env
++endif
++
++
++
++ifeq ($(CONFIG_PLATFORM_ACTIONS_ATJ227X), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_ACTIONS_ATJ227X
++ARCH := mips
++CROSS_COMPILE := /home/cnsd4/project/actions/tools-2.6.27/bin/mipsel-linux-gnu-
++KVER  := 2.6.27
++KSRC := /home/cnsd4/project/actions/linux-2.6.27.28
++endif
++
++ifeq ($(CONFIG_PLATFORM_TI_DM365), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_TI_DM365
++ARCH := arm
++CROSS_COMPILE := /home/cnsd4/Appro/mv_pro_5.0/montavista/pro/devkit/arm/v5t_le/bin/arm_v5t_le-
++KVER  := 2.6.18
++KSRC := /home/cnsd4/Appro/mv_pro_5.0/montavista/pro/devkit/lsp/ti-davinci/linux-dm365
++endif
++
++ifeq ($(CONFIG_PLATFORM_TEGRA3_CARDHU), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
++# default setting for Android 4.1, 4.2
++EXTRA_CFLAGS += -DRTW_ENABLE_WIFI_CONTROL_FUNC
++EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
++EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
++EXTRA_CFLAGS += -DCONFIG_P2P_IPS
++ARCH := arm
++CROSS_COMPILE := /home/android_sdk/nvidia/tegra-16r3-partner-android-4.1_20120723/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-
++KSRC := /home/android_sdk/nvidia/tegra-16r3-partner-android-4.1_20120723/out/target/product/cardhu/obj/KERNEL
++MODULE_NAME := wlan
++endif
++
++ifeq ($(CONFIG_PLATFORM_TEGRA4_DALMORE), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
++# default setting for Android 4.1, 4.2
++EXTRA_CFLAGS += -DRTW_ENABLE_WIFI_CONTROL_FUNC
++EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
++EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
++EXTRA_CFLAGS += -DCONFIG_P2P_IPS
++ARCH := arm
++CROSS_COMPILE := /home/android_sdk/nvidia/tegra-17r9-partner-android-4.2-dalmore_20130131/prebuilts/gcc/linux-x86/arm/arm-eabi-4.6/bin/arm-eabi-
++KSRC := /home/android_sdk/nvidia/tegra-17r9-partner-android-4.2-dalmore_20130131/out/target/product/dalmore/obj/KERNEL
++MODULE_NAME := wlan
++endif
++
++ifeq ($(CONFIG_PLATFORM_ARM_TCC8900), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
++ARCH := arm
++CROSS_COMPILE := /home/android_sdk/Telechips/SDK_2304_20110613/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-
++KSRC := /home/android_sdk/Telechips/SDK_2304_20110613/kernel
++MODULE_NAME := wlan
++endif
++
++ifeq ($(CONFIG_PLATFORM_ARM_TCC8920), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
++ARCH := arm
++CROSS_COMPILE := /home/android_sdk/Telechips/v12.06_r1-tcc-android-4.0.4/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-
++KSRC := /home/android_sdk/Telechips/v12.06_r1-tcc-android-4.0.4/kernel
++MODULE_NAME := wlan
++endif
++
++ifeq ($(CONFIG_PLATFORM_ARM_TCC8920_JB42), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
++# default setting for Android 4.1, 4.2
++EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
++EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
++EXTRA_CFLAGS += -DCONFIG_P2P_IPS
++ARCH := arm
++CROSS_COMPILE := /home/android_sdk/Telechips/v13.03_r1-tcc-android-4.2.2_ds_patched/prebuilts/gcc/linux-x86/arm/arm-eabi-4.6/bin/arm-eabi-
++KSRC := /home/android_sdk/Telechips/v13.03_r1-tcc-android-4.2.2_ds_patched/kernel
++MODULE_NAME := wlan
++endif
++
++ifeq ($(CONFIG_PLATFORM_ARM_RK2818), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_ANDROID -DCONFIG_PLATFORM_ROCKCHIPS -DCONFIG_MINIMAL_MEMORY_USAGE
++ARCH := arm
++CROSS_COMPILE := /usr/src/release_fae_version/toolchain/arm-eabi-4.4.0/bin/arm-eabi-
++KSRC := /usr/src/release_fae_version/kernel25_A7_281x
++MODULE_NAME := wlan
++endif
++
++ifeq ($(CONFIG_PLATFORM_ARM_TI_PANDA), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN #-DCONFIG_MINIMAL_MEMORY_USAGE
++ARCH := arm
++#CROSS_COMPILE := /media/DATA-1/aosp/ics-aosp_20111227/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-
++#KSRC := /media/DATA-1/aosp/android-omap-panda-3.0_20120104
++CROSS_COMPILE := /media/DATA-1/android-4.0/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-
++KSRC := /media/DATA-1/android-4.0/panda_kernel/omap
++MODULE_NAME := wlan
++endif
++
++ifeq ($(CONFIG_PLATFORM_MIPS_JZ4760), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_MINIMAL_MEMORY_USAGE
++ARCH ?= mips
++CROSS_COMPILE ?= /mnt/sdb5/Ingenic/Umido/mips-4.3/bin/mips-linux-gnu-
++KSRC ?= /mnt/sdb5/Ingenic/Umido/kernel
++endif
++
++#Add setting for MN10300
++ifeq ($(CONFIG_PLATFORM_MN10300), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_MN10300
++ARCH := mn10300
++CROSS_COMPILE := mn10300-linux-
++KVER := 2.6.32.2
++KSRC := /home/winuser/work/Plat_sLD2T_V3010/usr/src/linux-2.6.32.2
++INSTALL_PREFIX :=
++endif
++
++ifeq ($(CONFIG_PLATFORM_ARM_SUNxI), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_ARM_SUNxI
++ARCH := arm
++CROSS_COMPILE := arm-none-linux-gnueabi-
++KVER  := 3.0.8
++#KSRC:= ../lichee/linux-3.0/
++endif
++
++ifeq ($(CONFIG_PLATFORM_ARM_SUN6I), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
++EXTRA_CFLAGS += -DCONFIG_PLATFORM_ARM_SUN6I
++EXTRA_CFLAGS += -DCONFIG_USE_USB_BUFFER_ALLOC_TX
++EXTRA_CFLAGS += -DCONFIG_TRAFFIC_PROTECT
++# default setting for Android 4.1, 4.2
++EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
++EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
++EXTRA_CFLAGS += -DCONFIG_P2P_IPS
++ARCH := arm
++CROSS_COMPILE := arm-none-linux-gnueabi-
++KVER  := 3.3.0
++#KSRC:= ../lichee/linux-3.3/
++endif
++
++ifeq ($(CONFIG_ARCH_BCM2708), y)
++EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
++endif
++
++ifneq ($(USER_MODULE_NAME),)
++MODULE_NAME := $(USER_MODULE_NAME)
++endif
++
++ifeq ($(CONFIG_MP_INCLUDED), y)
++MODULE_NAME := $(MODULE_NAME)_mp
++EXTRA_CFLAGS += -DCONFIG_MP_INCLUDED
++endif
++
++
++ifneq ($(KERNELRELEASE),)
++
++
++rtk_core :=	core/rtw_cmd.o \
++		core/rtw_security.o \
++		core/rtw_debug.o \
++		core/rtw_io.o \
++		core/rtw_ioctl_query.o \
++		core/rtw_ioctl_set.o \
++		core/rtw_ieee80211.o \
++		core/rtw_mlme.o \
++		core/rtw_mlme_ext.o \
++		core/rtw_wlan_util.o \
++		core/rtw_pwrctrl.o \
++		core/rtw_rf.o \
++		core/rtw_recv.o \
++		core/rtw_sta_mgt.o \
++		core/rtw_ap.o \
++		core/rtw_xmit.o	\
++		core/rtw_p2p.o \
++		core/rtw_tdls.o \
++		core/rtw_br_ext.o \
++		core/rtw_iol.o \
++		core/rtw_sreset.o
++
++$(MODULE_NAME)-y += $(rtk_core)
++
++$(MODULE_NAME)-$(CONFIG_INTEL_WIDI) += core/rtw_intel_widi.o
++
++$(MODULE_NAME)-y += core/efuse/rtw_efuse.o
++
++$(MODULE_NAME)-y += $(_HAL_INTFS_FILES)
++
++$(MODULE_NAME)-y += $(_OS_INTFS_FILES)
++
++$(MODULE_NAME)-$(CONFIG_MP_INCLUDED) += core/rtw_mp.o \
++					core/rtw_mp_ioctl.o
++
++obj-$(CONFIG_RTL8192CU) := $(MODULE_NAME).o
++
++else
++
++export CONFIG_RTL8192CU = m
++
++all: modules
++
++modules:
++	$(MAKE) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) -C $(KSRC) M=$(shell pwd)  modules
++
++strip:
++	$(CROSS_COMPILE)strip $(MODULE_NAME).ko --strip-unneeded
++
++install:
++	install -p -m 644 $(MODULE_NAME).ko  $(MODDESTDIR)
++	/sbin/depmod -a ${KVER}
++
++uninstall:
++	rm -f $(MODDESTDIR)/$(MODULE_NAME).ko
++	/sbin/depmod -a ${KVER}
++
++
++config_r:
++	@echo "make config"
++	/bin/bash script/Configure script/config.in
++
++.PHONY: modules clean
++
++clean:
++	rm -fr *.mod.c *.mod *.o .*.cmd *.ko *~
++	rm .tmp_versions -fr ; rm Module.symvers -fr
++	rm -fr Module.markers ; rm -fr modules.order
++	cd core/efuse ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
++	cd core ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
++	cd hal/$(RTL871X)/$(HCI_NAME) ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
++	cd hal/$(RTL871X) ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
++	cd hal ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
++	cd os_dep/linux ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
++	cd os_dep ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
++endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/os_dep/linux/ioctl_cfg80211.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/os_dep/linux/ioctl_cfg80211.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/os_dep/linux/ioctl_cfg80211.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/os_dep/linux/ioctl_cfg80211.c	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,5489 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define  _IOCTL_CFG80211_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <rtw_ioctl.h>
++#include <rtw_ioctl_set.h>
++#include <rtw_ioctl_query.h>
++#include <xmit_osdep.h>
++
++#ifdef CONFIG_IOCTL_CFG80211
++
++#include "ioctl_cfg80211.h"	
++
++#define RTW_MAX_MGMT_TX_CNT (8)
++
++#define RTW_SCAN_IE_LEN_MAX      2304
++#define RTW_MAX_REMAIN_ON_CHANNEL_DURATION 65535 //ms
++#define RTW_MAX_NUM_PMKIDS 4
++
++#define RTW_CH_MAX_2G_CHANNEL               14      /* Max channel in 2G band */
++
++static const u32 rtw_cipher_suites[] = {
++	WLAN_CIPHER_SUITE_WEP40,
++	WLAN_CIPHER_SUITE_WEP104,
++	WLAN_CIPHER_SUITE_TKIP,
++	WLAN_CIPHER_SUITE_CCMP,
++#ifdef CONFIG_IEEE80211W
++	WLAN_CIPHER_SUITE_AES_CMAC,
++#endif //CONFIG_IEEE80211W
++};
++
++#define RATETAB_ENT(_rate, _rateid, _flags) \
++	{								\
++		.bitrate	= (_rate),				\
++		.hw_value	= (_rateid),				\
++		.flags		= (_flags),				\
++	}
++
++#define CHAN2G(_channel, _freq, _flags) {			\
++	.band			= IEEE80211_BAND_2GHZ,		\
++	.center_freq		= (_freq),			\
++	.hw_value		= (_channel),			\
++	.flags			= (_flags),			\
++	.max_antenna_gain	= 0,				\
++	.max_power		= 30,				\
++}
++
++#define CHAN5G(_channel, _flags) {				\
++	.band			= IEEE80211_BAND_5GHZ,		\
++	.center_freq		= 5000 + (5 * (_channel)),	\
++	.hw_value		= (_channel),			\
++	.flags			= (_flags),			\
++	.max_antenna_gain	= 0,				\
++	.max_power		= 30,				\
++}
++
++static struct ieee80211_rate rtw_rates[] = {
++	RATETAB_ENT(10,  0x1,   0),
++	RATETAB_ENT(20,  0x2,   0),
++	RATETAB_ENT(55,  0x4,   0),
++	RATETAB_ENT(110, 0x8,   0),
++	RATETAB_ENT(60,  0x10,  0),
++	RATETAB_ENT(90,  0x20,  0),
++	RATETAB_ENT(120, 0x40,  0),
++	RATETAB_ENT(180, 0x80,  0),
++	RATETAB_ENT(240, 0x100, 0),
++	RATETAB_ENT(360, 0x200, 0),
++	RATETAB_ENT(480, 0x400, 0),
++	RATETAB_ENT(540, 0x800, 0),
++};
++
++#define rtw_a_rates		(rtw_rates + 4)
++#define RTW_A_RATES_NUM	8
++#define rtw_g_rates		(rtw_rates + 0)
++#define RTW_G_RATES_NUM	12
++
++#define RTW_2G_CHANNELS_NUM 14
++#define RTW_5G_CHANNELS_NUM 37
++
++static struct ieee80211_channel rtw_2ghz_channels[] = {
++	CHAN2G(1, 2412, 0),
++	CHAN2G(2, 2417, 0),
++	CHAN2G(3, 2422, 0),
++	CHAN2G(4, 2427, 0),
++	CHAN2G(5, 2432, 0),
++	CHAN2G(6, 2437, 0),
++	CHAN2G(7, 2442, 0),
++	CHAN2G(8, 2447, 0),
++	CHAN2G(9, 2452, 0),
++	CHAN2G(10, 2457, 0),
++	CHAN2G(11, 2462, 0),
++	CHAN2G(12, 2467, 0),
++	CHAN2G(13, 2472, 0),
++	CHAN2G(14, 2484, 0),
++};
++
++static struct ieee80211_channel rtw_5ghz_a_channels[] = {
++	CHAN5G(34, 0),		CHAN5G(36, 0),
++	CHAN5G(38, 0),		CHAN5G(40, 0),
++	CHAN5G(42, 0),		CHAN5G(44, 0),
++	CHAN5G(46, 0),		CHAN5G(48, 0),
++	CHAN5G(52, 0),		CHAN5G(56, 0),
++	CHAN5G(60, 0),		CHAN5G(64, 0),
++	CHAN5G(100, 0),		CHAN5G(104, 0),
++	CHAN5G(108, 0),		CHAN5G(112, 0),
++	CHAN5G(116, 0),		CHAN5G(120, 0),
++	CHAN5G(124, 0),		CHAN5G(128, 0),
++	CHAN5G(132, 0),		CHAN5G(136, 0),
++	CHAN5G(140, 0),		CHAN5G(149, 0),
++	CHAN5G(153, 0),		CHAN5G(157, 0),
++	CHAN5G(161, 0),		CHAN5G(165, 0),
++	CHAN5G(184, 0),		CHAN5G(188, 0),
++	CHAN5G(192, 0),		CHAN5G(196, 0),
++	CHAN5G(200, 0),		CHAN5G(204, 0),
++	CHAN5G(208, 0),		CHAN5G(212, 0),
++	CHAN5G(216, 0),
++};
++
++
++void rtw_2g_channels_init(struct ieee80211_channel *channels)
++{
++	_rtw_memcpy((void*)channels, (void*)rtw_2ghz_channels,
++		sizeof(struct ieee80211_channel)*RTW_2G_CHANNELS_NUM
++	);
++}
++
++void rtw_5g_channels_init(struct ieee80211_channel *channels)
++{
++	_rtw_memcpy((void*)channels, (void*)rtw_5ghz_a_channels,
++		sizeof(struct ieee80211_channel)*RTW_5G_CHANNELS_NUM
++	);
++}
++
++void rtw_2g_rates_init(struct ieee80211_rate *rates)
++{
++	_rtw_memcpy(rates, rtw_g_rates,
++		sizeof(struct ieee80211_rate)*RTW_G_RATES_NUM
++	);
++}
++
++void rtw_5g_rates_init(struct ieee80211_rate *rates)
++{
++	_rtw_memcpy(rates, rtw_a_rates,
++		sizeof(struct ieee80211_rate)*RTW_A_RATES_NUM
++	);
++}
++
++struct ieee80211_supported_band *rtw_spt_band_alloc(
++	enum ieee80211_band band
++	)
++{
++	struct ieee80211_supported_band *spt_band = NULL;
++	int n_channels, n_bitrates;
++
++	if(band == IEEE80211_BAND_2GHZ)
++	{
++		n_channels = RTW_2G_CHANNELS_NUM;
++		n_bitrates = RTW_G_RATES_NUM;
++	}
++	else if(band == IEEE80211_BAND_5GHZ)
++	{
++		n_channels = RTW_5G_CHANNELS_NUM;
++		n_bitrates = RTW_A_RATES_NUM;
++	}
++	else
++	{
++		goto exit;
++	}
++
++	spt_band = (struct ieee80211_supported_band *)rtw_zmalloc(
++		sizeof(struct ieee80211_supported_band)
++		+ sizeof(struct ieee80211_channel)*n_channels
++		+ sizeof(struct ieee80211_rate)*n_bitrates
++	);
++	if(!spt_band)
++		goto exit;
++
++	spt_band->channels = (struct ieee80211_channel*)(((u8*)spt_band)+sizeof(struct ieee80211_supported_band));
++	spt_band->bitrates= (struct ieee80211_rate*)(((u8*)spt_band->channels)+sizeof(struct ieee80211_channel)*n_channels);
++	spt_band->band = band;
++	spt_band->n_channels = n_channels;
++	spt_band->n_bitrates = n_bitrates;
++
++	if(band == IEEE80211_BAND_2GHZ)
++	{
++		rtw_2g_channels_init(spt_band->channels);
++		rtw_2g_rates_init(spt_band->bitrates);
++	}
++	else if(band == IEEE80211_BAND_5GHZ)
++	{
++		rtw_5g_channels_init(spt_band->channels);
++		rtw_5g_rates_init(spt_band->bitrates);
++	}
++
++	//spt_band.ht_cap
++	
++exit:
++
++	return spt_band;
++}
++
++void rtw_spt_band_free(struct ieee80211_supported_band *spt_band)
++{
++	u32 size;
++
++	if(!spt_band)
++		return;
++	
++	if(spt_band->band == IEEE80211_BAND_2GHZ)
++	{
++		size = sizeof(struct ieee80211_supported_band)
++			+ sizeof(struct ieee80211_channel)*RTW_2G_CHANNELS_NUM
++			+ sizeof(struct ieee80211_rate)*RTW_G_RATES_NUM;
++	}
++	else if(spt_band->band == IEEE80211_BAND_5GHZ)
++	{
++		size = sizeof(struct ieee80211_supported_band)
++			+ sizeof(struct ieee80211_channel)*RTW_5G_CHANNELS_NUM
++			+ sizeof(struct ieee80211_rate)*RTW_A_RATES_NUM;		
++	}
++	else
++	{
++		
++	}
++	rtw_mfree((u8*)spt_band, size);
++}
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE)
++static const struct ieee80211_txrx_stypes
++rtw_cfg80211_default_mgmt_stypes[NUM_NL80211_IFTYPES] = {
++	[NL80211_IFTYPE_ADHOC] = {
++		.tx = 0xffff,
++		.rx = BIT(IEEE80211_STYPE_ACTION >> 4)
++	},
++	[NL80211_IFTYPE_STATION] = {
++		.tx = 0xffff,
++		.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
++		BIT(IEEE80211_STYPE_PROBE_REQ >> 4)
++	},
++	[NL80211_IFTYPE_AP] = {
++		.tx = 0xffff,
++		.rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
++		BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
++		BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
++		BIT(IEEE80211_STYPE_DISASSOC >> 4) |
++		BIT(IEEE80211_STYPE_AUTH >> 4) |
++		BIT(IEEE80211_STYPE_DEAUTH >> 4) |
++		BIT(IEEE80211_STYPE_ACTION >> 4)
++	},
++	[NL80211_IFTYPE_AP_VLAN] = {
++		/* copy AP */
++		.tx = 0xffff,
++		.rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
++		BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
++		BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
++		BIT(IEEE80211_STYPE_DISASSOC >> 4) |
++		BIT(IEEE80211_STYPE_AUTH >> 4) |
++		BIT(IEEE80211_STYPE_DEAUTH >> 4) |
++		BIT(IEEE80211_STYPE_ACTION >> 4)
++	},
++	[NL80211_IFTYPE_P2P_CLIENT] = {
++		.tx = 0xffff,
++		.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
++		BIT(IEEE80211_STYPE_PROBE_REQ >> 4)
++	},
++	[NL80211_IFTYPE_P2P_GO] = {
++		.tx = 0xffff,
++		.rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
++		BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
++		BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
++		BIT(IEEE80211_STYPE_DISASSOC >> 4) |
++		BIT(IEEE80211_STYPE_AUTH >> 4) |
++		BIT(IEEE80211_STYPE_DEAUTH >> 4) |
++		BIT(IEEE80211_STYPE_ACTION >> 4)
++	},
++};
++#endif
++
++static int rtw_ieee80211_channel_to_frequency(int chan, int band)
++{
++	/* see 802.11 17.3.8.3.2 and Annex J
++	* there are overlapping channel numbers in 5GHz and 2GHz bands */
++           
++	if (band == IEEE80211_BAND_5GHZ) {
++       	if (chan >= 182 && chan <= 196)
++			return 4000 + chan * 5;
++             else
++                    return 5000 + chan * 5;
++       } else { /* IEEE80211_BAND_2GHZ */
++		if (chan == 14)
++			return 2484;
++             else if (chan < 14)
++			return 2407 + chan * 5;
++             else
++			return 0; /* not supported */
++	}
++}
++
++#define MAX_BSSINFO_LEN 1000
++static int rtw_cfg80211_inform_bss(_adapter *padapter, struct wlan_network *pnetwork)
++{
++	int ret=0;	
++	struct ieee80211_channel *notify_channel;
++	struct cfg80211_bss *bss;
++	//struct ieee80211_supported_band *band;       
++	u16 channel;
++	u32 freq;
++	u64 notify_timestamp;
++	u16 notify_capability;
++	u16 notify_interval;
++	u8 *notify_ie;
++	size_t notify_ielen;
++	s32 notify_signal;
++	u8 buf[MAX_BSSINFO_LEN], *pbuf;
++	size_t len,bssinf_len=0;
++	struct rtw_ieee80211_hdr *pwlanhdr;
++	unsigned short *fctrl;
++	u8	bc_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
++		
++	struct wireless_dev *wdev = padapter->rtw_wdev;
++	struct wiphy *wiphy = wdev->wiphy;
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++
++
++	//DBG_8192C("%s\n", __func__);
++
++	bssinf_len = pnetwork->network.IELength+sizeof (struct rtw_ieee80211_hdr_3addr);
++	if(bssinf_len > MAX_BSSINFO_LEN){
++		DBG_871X("%s IE Length too long > %d byte \n",__FUNCTION__,MAX_BSSINFO_LEN);
++		goto exit;
++	}
++
++	//To reduce PBC Overlap rate
++	//_enter_critical_bh(&pwdev_priv->scan_req_lock, &irqL);
++	if(wdev_to_priv(wdev)->scan_request != NULL)
++	{
++		u8 *psr=NULL, sr = 0;
++		NDIS_802_11_SSID *pssid = &pnetwork->network.Ssid;
++		struct cfg80211_scan_request *request = wdev_to_priv(wdev)->scan_request;
++		struct cfg80211_ssid *ssids = request->ssids;
++		u32 wpsielen=0;
++		u8 *wpsie=NULL;	
++		
++		wpsie = rtw_get_wps_ie(pnetwork->network.IEs+_FIXED_IE_LENGTH_, pnetwork->network.IELength-_FIXED_IE_LENGTH_, NULL, &wpsielen);
++		
++		if(wpsie && wpsielen>0)
++			psr = rtw_get_wps_attr_content(wpsie,  wpsielen, WPS_ATTR_SELECTED_REGISTRAR, (u8*)(&sr), NULL);
++		
++		if (sr != 0)
++		{			
++			if(request->n_ssids == 1  && request->n_channels == 1) // it means under processing WPS
++			{
++				DBG_8192C("ssid=%s, len=%d\n", pssid->Ssid, pssid->SsidLength);
++			
++				if(pssid->SsidLength == ssids[0].ssid_len &&
++					_rtw_memcmp(pssid->Ssid, ssids[0].ssid, ssids[0].ssid_len))
++				{
++					DBG_871X("%s, got sr and ssid match!\n", __func__);
++				}
++				else
++				{
++					if(psr !=NULL)
++						*psr = 0; //clear sr
++				
++#if 0			
++					WLAN_BSSID_EX  *pselect_network = &pnetwork->network;
++					struct cfg80211_bss *pselect_bss = NULL;
++					struct ieee80211_channel *notify_channel = NULL;
++					u32 freq;
++
++					DBG_871X("%s, got sr, but ssid mismatch, to remove this bss\n", __func__);
++
++					if (pselect_network->Configuration.DSConfig <= RTW_CH_MAX_2G_CHANNEL)
++						freq = rtw_ieee80211_channel_to_frequency(pselect_network->Configuration.DSConfig, IEEE80211_BAND_2GHZ);
++					else
++						freq = rtw_ieee80211_channel_to_frequency(pselect_network->Configuration.DSConfig, IEEE80211_BAND_5GHZ);
++
++					notify_channel = ieee80211_get_channel(wiphy, freq);
++					pselect_bss = cfg80211_get_bss(wiphy, NULL/*notify_channel*/,
++								pselect_network->MacAddress, pselect_network->Ssid.Ssid,
++								pselect_network->Ssid.SsidLength, 0/*WLAN_CAPABILITY_ESS*/, 
++								0/*WLAN_CAPABILITY_ESS*/);
++
++					if(pselect_bss)
++					{
++						DBG_871X("%s, got bss for cfg80211 for unlinking bss\n", __func__);
++
++						cfg80211_unlink_bss(wiphy, pselect_bss);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 9, 0)
++						cfg80211_put_bss(wiphy, pselect_bss);
++#else
++						cfg80211_put_bss(pselect_bss);
++#endif
++						
++					}
++					
++					goto exit;
++#endif 					
++				}			
++			}			
++		}		
++	}
++	//_exit_critical_bh(&pwdev_priv->scan_req_lock, &irqL);
++
++	channel = pnetwork->network.Configuration.DSConfig;
++	if (channel <= RTW_CH_MAX_2G_CHANNEL)
++		freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ);
++	else
++		freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_5GHZ);
++	
++	notify_channel = ieee80211_get_channel(wiphy, freq);
++
++	//rtw_get_timestampe_from_ie()
++	notify_timestamp = jiffies_to_msecs(jiffies)*1000; /* uSec */
++
++	notify_interval = le16_to_cpu(*(u16*)rtw_get_beacon_interval_from_ie(pnetwork->network.IEs));
++	notify_capability = le16_to_cpu(*(u16*)rtw_get_capability_from_ie(pnetwork->network.IEs));		
++
++	
++	notify_ie = pnetwork->network.IEs+_FIXED_IE_LENGTH_;
++	notify_ielen = pnetwork->network.IELength-_FIXED_IE_LENGTH_;
++
++	//We've set wiphy's signal_type as CFG80211_SIGNAL_TYPE_MBM: signal strength in mBm (100*dBm)
++	if ( check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE &&
++		is_same_network(&pmlmepriv->cur_network.network, &pnetwork->network)) {
++		notify_signal = 100*translate_percentage_to_dbm(padapter->recvpriv.signal_strength);//dbm
++	} else {
++		notify_signal = 100*translate_percentage_to_dbm(pnetwork->network.PhyInfo.SignalStrength);//dbm
++	}
++		
++/*
++	DBG_8192C("bssid: %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
++                        pnetwork->network.MacAddress[0], pnetwork->network.MacAddress[1], pnetwork->network.MacAddress[2],
++                        pnetwork->network.MacAddress[3], pnetwork->network.MacAddress[4], pnetwork->network.MacAddress[5]);
++	DBG_8192C("Channel: %d(%d)\n", channel, freq);
++	DBG_8192C("Capability: %X\n", notify_capability);
++	DBG_8192C("Beacon interval: %d\n", notify_interval);
++	DBG_8192C("Signal: %d\n", notify_signal);
++	DBG_8192C("notify_timestamp: %#018llx\n", notify_timestamp);
++*/
++
++	pbuf = buf;
++	
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pbuf;	
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;	
++
++	SetSeqNum(pwlanhdr, 0/*pmlmeext->mgnt_seq*/);
++	//pmlmeext->mgnt_seq++;
++
++	if (pnetwork->network.Reserved[0] == 1) { // WIFI_BEACON
++		_rtw_memcpy(pwlanhdr->addr1, bc_addr, ETH_ALEN);		
++		SetFrameSubType(pbuf, WIFI_BEACON);
++	} else {
++		_rtw_memcpy(pwlanhdr->addr1, myid(&(padapter->eeprompriv)), ETH_ALEN);
++		SetFrameSubType(pbuf, WIFI_PROBERSP);
++	}
++
++	_rtw_memcpy(pwlanhdr->addr2, pnetwork->network.MacAddress, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr3, pnetwork->network.MacAddress, ETH_ALEN);
++
++
++	pbuf += sizeof(struct rtw_ieee80211_hdr_3addr);	
++	len = sizeof (struct rtw_ieee80211_hdr_3addr);
++
++	_rtw_memcpy(pbuf, pnetwork->network.IEs, pnetwork->network.IELength);
++	len += pnetwork->network.IELength;
++
++	//#ifdef CONFIG_P2P
++	//if(rtw_get_p2p_ie(pnetwork->network.IEs+12, pnetwork->network.IELength-12, NULL, NULL))
++	//{
++	//	DBG_8192C("%s, got p2p_ie\n", __func__);
++	//}
++	//#endif
++	
++
++#if 1	
++	bss = cfg80211_inform_bss_frame(wiphy, notify_channel, (struct ieee80211_mgmt *)buf,
++		len, notify_signal, GFP_ATOMIC);
++#else			 
++			
++	bss = cfg80211_inform_bss(wiphy, notify_channel, (const u8 *)pnetwork->network.MacAddress,
++                notify_timestamp, notify_capability, notify_interval, notify_ie,
++                notify_ielen, notify_signal, GFP_ATOMIC/*GFP_KERNEL*/);
++#endif
++
++	if (unlikely(!bss)) {
++		DBG_8192C("rtw_cfg80211_inform_bss error\n");
++		return -EINVAL;
++	}
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38))
++#ifndef COMPAT_KERNEL_RELEASE
++	//patch for cfg80211, update beacon ies to information_elements
++	if (pnetwork->network.Reserved[0] == 1) { // WIFI_BEACON
++	
++		 if(bss->len_information_elements != bss->len_beacon_ies)
++		 {
++			bss->information_elements = bss->beacon_ies;			
++			bss->len_information_elements =  bss->len_beacon_ies;
++		 }		
++	}
++#endif //COMPAT_KERNEL_RELEASE
++#endif //LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38)
++
++/*	
++	{
++		if( bss->information_elements == bss->proberesp_ies) 
++		{
++			if( bss->len_information_elements !=  bss->len_proberesp_ies)
++			{
++				DBG_8192C("error!, len_information_elements !=  bss->len_proberesp_ies\n");
++			}
++							
++		}
++		else if(bss->len_information_elements <  bss->len_beacon_ies)
++		{
++			bss->information_elements = bss->beacon_ies;			
++			bss->len_information_elements =  bss->len_beacon_ies;
++		}
++	}
++*/
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 9, 0)
++	cfg80211_put_bss(wiphy, bss);
++#else
++	cfg80211_put_bss(bss);
++#endif
++
++exit:	
++	return ret;
++	
++}
++
++/*
++	Check the given bss is valid by kernel API cfg80211_get_bss()
++	@padapter : the given adapter
++	
++	return _TRUE if bss is valid,  _FALSE for not found.
++*/
++int rtw_cfg80211_check_bss(_adapter *padapter)
++{
++	WLAN_BSSID_EX  *pnetwork = &(padapter->mlmeextpriv.mlmext_info.network);
++	struct cfg80211_bss *bss = NULL;
++	struct ieee80211_channel *notify_channel = NULL;
++	u32 freq;
++
++	if (!(pnetwork) || !(padapter->rtw_wdev))
++		return _FALSE;
++
++	if (pnetwork->Configuration.DSConfig <= RTW_CH_MAX_2G_CHANNEL)
++		freq = rtw_ieee80211_channel_to_frequency(pnetwork->Configuration.DSConfig, IEEE80211_BAND_2GHZ);
++	else
++		freq = rtw_ieee80211_channel_to_frequency(pnetwork->Configuration.DSConfig, IEEE80211_BAND_5GHZ);
++
++	notify_channel = ieee80211_get_channel(padapter->rtw_wdev->wiphy, freq);
++	bss = cfg80211_get_bss(padapter->rtw_wdev->wiphy, notify_channel,
++			pnetwork->MacAddress, pnetwork->Ssid.Ssid,
++			pnetwork->Ssid.SsidLength,
++			WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS);
++
++	return 	(bss!=NULL);
++}
++
++void rtw_cfg80211_indicate_connect(_adapter *padapter)
++{
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	struct wlan_network  *cur_network = &(pmlmepriv->cur_network);
++	struct wireless_dev *pwdev = padapter->rtw_wdev;
++#ifdef CONFIG_P2P
++	struct wifidirect_info *pwdinfo= &(padapter->wdinfo);
++#endif
++	struct cfg80211_bss *bss = NULL;
++
++	DBG_871X(FUNC_ADPT_FMT"\n", FUNC_ADPT_ARG(padapter));
++	if (pwdev->iftype != NL80211_IFTYPE_STATION
++		#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE)
++		&& pwdev->iftype != NL80211_IFTYPE_P2P_CLIENT
++		#endif
++	) {
++		return;
++	}
++
++	if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE)
++		return;
++
++#ifdef CONFIG_P2P
++	if(pwdinfo->driver_interface == DRIVER_CFG80211 )
++	{
++		if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++		{
++			rtw_p2p_set_pre_state(pwdinfo, rtw_p2p_state(pwdinfo));
++			rtw_p2p_set_role(pwdinfo, P2P_ROLE_CLIENT);
++			rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_OK);
++			DBG_8192C("%s, role=%d, p2p_state=%d, pre_p2p_state=%d\n", __func__, rtw_p2p_role(pwdinfo), rtw_p2p_state(pwdinfo), rtw_p2p_pre_state(pwdinfo));
++		}
++	}
++#endif //CONFIG_P2P
++
++	#ifdef CONFIG_LAYER2_ROAMING
++	if (rtw_to_roaming(padapter) > 0) {
++		#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 39) || defined(COMPAT_KERNEL_RELEASE)
++		struct wiphy *wiphy = pwdev->wiphy;
++		struct ieee80211_channel *notify_channel;
++		u32 freq;
++		u16 channel = cur_network->network.Configuration.DSConfig;
++
++		if (channel <= RTW_CH_MAX_2G_CHANNEL)
++			freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ);
++		else
++			freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_5GHZ);
++
++		notify_channel = ieee80211_get_channel(wiphy, freq);
++		#endif
++
++		DBG_871X("%s call cfg80211_roamed\n", __FUNCTION__);
++		cfg80211_roamed(padapter->pnetdev
++			#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 39) || defined(COMPAT_KERNEL_RELEASE)
++			, notify_channel
++			#endif
++			, cur_network->network.MacAddress
++			, pmlmepriv->assoc_req+sizeof(struct rtw_ieee80211_hdr_3addr)+2
++			, pmlmepriv->assoc_req_len-sizeof(struct rtw_ieee80211_hdr_3addr)-2
++			, pmlmepriv->assoc_rsp+sizeof(struct rtw_ieee80211_hdr_3addr)+6
++			, pmlmepriv->assoc_rsp_len-sizeof(struct rtw_ieee80211_hdr_3addr)-6
++			, GFP_ATOMIC);
++	}
++	else 
++	#endif
++	{
++		DBG_8192C("pwdev->sme_state(b)=%d\n", pwdev->sme_state);
++		cfg80211_connect_result(padapter->pnetdev, cur_network->network.MacAddress
++			, pmlmepriv->assoc_req+sizeof(struct rtw_ieee80211_hdr_3addr)+2
++			, pmlmepriv->assoc_req_len-sizeof(struct rtw_ieee80211_hdr_3addr)-2
++			, pmlmepriv->assoc_rsp+sizeof(struct rtw_ieee80211_hdr_3addr)+6
++			, pmlmepriv->assoc_rsp_len-sizeof(struct rtw_ieee80211_hdr_3addr)-6
++			, WLAN_STATUS_SUCCESS, GFP_ATOMIC);
++		DBG_8192C("pwdev->sme_state(a)=%d\n", pwdev->sme_state);
++	}
++}
++
++void rtw_cfg80211_indicate_disconnect(_adapter *padapter)
++{
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	struct wireless_dev *pwdev = padapter->rtw_wdev;
++#ifdef CONFIG_P2P
++	struct wifidirect_info *pwdinfo= &(padapter->wdinfo);
++#endif
++
++	DBG_871X(FUNC_ADPT_FMT"\n", FUNC_ADPT_ARG(padapter));
++
++	if (pwdev->iftype != NL80211_IFTYPE_STATION 
++		#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE)
++		&& pwdev->iftype != NL80211_IFTYPE_P2P_CLIENT
++		#endif
++	) {
++		return;
++	}
++
++	if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE)
++		return;
++
++#ifdef CONFIG_P2P	
++	if( pwdinfo->driver_interface == DRIVER_CFG80211 )
++	{
++		if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++		{
++			_cancel_timer_ex( &pwdinfo->find_phase_timer );
++			_cancel_timer_ex( &pwdinfo->restore_p2p_state_timer );
++			_cancel_timer_ex( &pwdinfo->pre_tx_scan_timer);
++	
++			rtw_p2p_set_state(pwdinfo, rtw_p2p_pre_state(pwdinfo));
++			rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE);
++
++			DBG_8192C("%s, role=%d, p2p_state=%d, pre_p2p_state=%d\n", __func__, rtw_p2p_role(pwdinfo), rtw_p2p_state(pwdinfo), rtw_p2p_pre_state(pwdinfo));
++		}
++	}
++#endif //CONFIG_P2P
++
++	if (!padapter->mlmepriv.not_indic_disco) {
++		DBG_8192C("pwdev->sme_state(b)=%d\n", pwdev->sme_state);
++
++		if(pwdev->sme_state==CFG80211_SME_CONNECTING)
++			cfg80211_connect_result(padapter->pnetdev, NULL, NULL, 0, NULL, 0, 
++				WLAN_STATUS_UNSPECIFIED_FAILURE, GFP_ATOMIC/*GFP_KERNEL*/);
++		else if(pwdev->sme_state==CFG80211_SME_CONNECTED)
++			cfg80211_disconnected(padapter->pnetdev, 0, NULL, 0, GFP_ATOMIC);
++		//else
++			//DBG_8192C("pwdev->sme_state=%d\n", pwdev->sme_state);
++
++		DBG_8192C("pwdev->sme_state(a)=%d\n", pwdev->sme_state);
++	}
++}
++ 	
++
++#ifdef CONFIG_AP_MODE
++static u8 set_pairwise_key(_adapter *padapter, struct sta_info *psta)
++{
++	struct cmd_obj*			ph2c;
++	struct set_stakey_parm	*psetstakey_para;
++	struct cmd_priv 			*pcmdpriv=&padapter->cmdpriv;	
++	u8	res=_SUCCESS;
++
++	ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));
++	if ( ph2c == NULL){
++		res= _FAIL;
++		goto exit;
++	}
++
++	psetstakey_para = (struct set_stakey_parm*)rtw_zmalloc(sizeof(struct set_stakey_parm));
++	if(psetstakey_para==NULL){
++		rtw_mfree((u8 *) ph2c, sizeof(struct cmd_obj));
++		res=_FAIL;
++		goto exit;
++	}
++
++	init_h2fwcmd_w_parm_no_rsp(ph2c, psetstakey_para, _SetStaKey_CMD_);
++
++
++	psetstakey_para->algorithm = (u8)psta->dot118021XPrivacy;
++
++	_rtw_memcpy(psetstakey_para->addr, psta->hwaddr, ETH_ALEN);	
++	
++	_rtw_memcpy(psetstakey_para->key, &psta->dot118021x_UncstKey, 16);
++
++	
++	res = rtw_enqueue_cmd(pcmdpriv, ph2c);	
++
++exit:
++
++	return res;
++	
++}
++
++static int set_group_key(_adapter *padapter, u8 *key, u8 alg, int keyid)
++{
++	u8 keylen;
++	struct cmd_obj* pcmd;
++	struct setkey_parm *psetkeyparm;
++	struct cmd_priv	*pcmdpriv=&(padapter->cmdpriv);	
++	int res=_SUCCESS;
++
++	DBG_8192C("%s\n", __FUNCTION__);
++	
++	pcmd = (struct cmd_obj*)rtw_zmalloc(sizeof(struct	cmd_obj));
++	if(pcmd==NULL){
++		res= _FAIL;
++		goto exit;
++	}
++	psetkeyparm=(struct setkey_parm*)rtw_zmalloc(sizeof(struct setkey_parm));
++	if(psetkeyparm==NULL){
++		rtw_mfree((unsigned char *)pcmd, sizeof(struct cmd_obj));
++		res= _FAIL;
++		goto exit;
++	}
++
++	_rtw_memset(psetkeyparm, 0, sizeof(struct setkey_parm));
++		
++	psetkeyparm->keyid=(u8)keyid;
++	if (is_wep_enc(alg))
++		padapter->securitypriv.key_mask |= BIT(psetkeyparm->keyid);
++
++	psetkeyparm->algorithm = alg;
++
++	psetkeyparm->set_tx = 1;
++
++	switch(alg)
++	{
++		case _WEP40_:					
++			keylen = 5;
++			break;
++		case _WEP104_:
++			keylen = 13;			
++			break;
++		case _TKIP_:
++		case _TKIP_WTMIC_:		
++		case _AES_:
++			keylen = 16;		
++		default:
++			keylen = 16;		
++	}
++
++	_rtw_memcpy(&(psetkeyparm->key[0]), key, keylen);
++	
++	pcmd->cmdcode = _SetKey_CMD_;
++	pcmd->parmbuf = (u8 *)psetkeyparm;   
++	pcmd->cmdsz =  (sizeof(struct setkey_parm));  
++	pcmd->rsp = NULL;
++	pcmd->rspsz = 0;
++
++
++	_rtw_init_listhead(&pcmd->list);
++
++	res = rtw_enqueue_cmd(pcmdpriv, pcmd);
++
++exit:
++
++	return res;
++	
++
++}
++
++static int set_wep_key(_adapter *padapter, u8 *key, u8 keylen, int keyid)
++{	
++	u8 alg;
++
++	switch(keylen)
++	{
++		case 5:
++			alg =_WEP40_;			
++			break;
++		case 13:
++			alg =_WEP104_;			
++			break;
++		default:
++			alg =_NO_PRIVACY_;			
++	}
++
++	return set_group_key(padapter, key, alg, keyid);
++
++}
++
++static int rtw_cfg80211_ap_set_encryption(struct net_device *dev, struct ieee_param *param, u32 param_len)
++{
++	int ret = 0;
++	u32 wep_key_idx, wep_key_len,wep_total_len;
++	struct sta_info *psta = NULL, *pbcmc_sta = NULL;	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_priv 	*pmlmepriv = &padapter->mlmepriv;
++	struct security_priv* psecuritypriv=&(padapter->securitypriv);
++	struct sta_priv *pstapriv = &padapter->stapriv;
++
++	DBG_8192C("%s\n", __FUNCTION__);
++
++	param->u.crypt.err = 0;
++	param->u.crypt.alg[IEEE_CRYPT_ALG_NAME_LEN - 1] = '\0';
++
++	//sizeof(struct ieee_param) = 64 bytes;
++	//if (param_len !=  (u32) ((u8 *) param->u.crypt.key - (u8 *) param) + param->u.crypt.key_len)
++	if (param_len !=  sizeof(struct ieee_param) + param->u.crypt.key_len)
++	{
++		ret =  -EINVAL;
++		goto exit;
++	}
++
++	if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
++	    param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
++	    param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) 
++	{
++		if (param->u.crypt.idx >= WEP_KEYS)
++		{
++			ret = -EINVAL;
++			goto exit;
++		}	
++	}
++	else 
++	{		
++		psta = rtw_get_stainfo(pstapriv, param->sta_addr);
++		if(!psta)
++		{
++			//ret = -EINVAL;
++			DBG_8192C("rtw_set_encryption(), sta has already been removed or never been added\n");
++			goto exit;
++		}			
++	}
++
++	if (strcmp(param->u.crypt.alg, "none") == 0 && (psta==NULL))
++	{
++		//todo:clear default encryption keys
++
++		DBG_8192C("clear default encryption keys, keyid=%d\n", param->u.crypt.idx);
++		
++		goto exit;
++	}
++
++
++	if (strcmp(param->u.crypt.alg, "WEP") == 0 && (psta==NULL))
++	{		
++		DBG_8192C("r871x_set_encryption, crypt.alg = WEP\n");
++		
++		wep_key_idx = param->u.crypt.idx;
++		wep_key_len = param->u.crypt.key_len;
++					
++		DBG_8192C("r871x_set_encryption, wep_key_idx=%d, len=%d\n", wep_key_idx, wep_key_len);
++
++		if((wep_key_idx >= WEP_KEYS) || (wep_key_len<=0))
++		{
++			ret = -EINVAL;
++			goto exit;
++		}
++			
++		if (wep_key_len > 0) 
++		{			
++		 	wep_key_len = wep_key_len <= 5 ? 5 : 13;
++		}
++		
++		if (psecuritypriv->bWepDefaultKeyIdxSet == 0)
++		{
++			//wep default key has not been set, so use this key index as default key.
++
++			psecuritypriv->ndisencryptstatus = Ndis802_11Encryption1Enabled;
++			psecuritypriv->dot11PrivacyAlgrthm=_WEP40_;
++			psecuritypriv->dot118021XGrpPrivacy=_WEP40_;
++			
++			if(wep_key_len == 13)
++			{
++				psecuritypriv->dot11PrivacyAlgrthm=_WEP104_;
++				psecuritypriv->dot118021XGrpPrivacy=_WEP104_;
++			}
++
++			psecuritypriv->dot11PrivacyKeyIndex = wep_key_idx;
++		}
++			
++		_rtw_memcpy(&(psecuritypriv->dot11DefKey[wep_key_idx].skey[0]), param->u.crypt.key, wep_key_len);
++					
++		psecuritypriv->dot11DefKeylen[wep_key_idx] = wep_key_len;
++
++		set_wep_key(padapter, param->u.crypt.key, wep_key_len, wep_key_idx);
++
++		goto exit;
++		
++	}
++
++	
++	if(!psta && check_fwstate(pmlmepriv, WIFI_AP_STATE)) // //group key
++	{
++		if(param->u.crypt.set_tx == 0) //group key
++		{
++			if(strcmp(param->u.crypt.alg, "WEP") == 0)
++			{
++				DBG_8192C("%s, set group_key, WEP\n", __FUNCTION__);
++				
++				_rtw_memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey,  param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len));
++					
++				psecuritypriv->dot118021XGrpPrivacy = _WEP40_;
++				if(param->u.crypt.key_len==13)
++				{						
++						psecuritypriv->dot118021XGrpPrivacy = _WEP104_;
++				}
++				
++			}
++			else if(strcmp(param->u.crypt.alg, "TKIP") == 0)
++			{						
++				DBG_8192C("%s, set group_key, TKIP\n", __FUNCTION__);
++				
++				psecuritypriv->dot118021XGrpPrivacy = _TKIP_;
++
++				_rtw_memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey,  param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len));
++				
++				//DEBUG_ERR("set key length :param->u.crypt.key_len=%d\n", param->u.crypt.key_len);
++				//set mic key
++				_rtw_memcpy(psecuritypriv->dot118021XGrptxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[16]), 8);
++				_rtw_memcpy(psecuritypriv->dot118021XGrprxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[24]), 8);
++
++				psecuritypriv->busetkipkey = _TRUE;
++											
++			}
++			else if(strcmp(param->u.crypt.alg, "CCMP") == 0)
++			{
++				DBG_8192C("%s, set group_key, CCMP\n", __FUNCTION__);
++			
++				psecuritypriv->dot118021XGrpPrivacy = _AES_;
++
++				_rtw_memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey,  param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len));
++			}
++			else
++			{
++				DBG_8192C("%s, set group_key, none\n", __FUNCTION__);
++				
++				psecuritypriv->dot118021XGrpPrivacy = _NO_PRIVACY_;
++			}
++
++			psecuritypriv->dot118021XGrpKeyid = param->u.crypt.idx;
++
++			psecuritypriv->binstallGrpkey = _TRUE;
++
++			psecuritypriv->dot11PrivacyAlgrthm = psecuritypriv->dot118021XGrpPrivacy;//!!!
++								
++			set_group_key(padapter, param->u.crypt.key, psecuritypriv->dot118021XGrpPrivacy, param->u.crypt.idx);
++			
++			pbcmc_sta=rtw_get_bcmc_stainfo(padapter);
++			if(pbcmc_sta)
++			{
++				pbcmc_sta->ieee8021x_blocked = _FALSE;
++				pbcmc_sta->dot118021XPrivacy= psecuritypriv->dot118021XGrpPrivacy;//rx will use bmc_sta's dot118021XPrivacy			
++			}	
++						
++		}
++
++		goto exit;
++		
++	}	
++
++	if(psecuritypriv->dot11AuthAlgrthm == dot11AuthAlgrthm_8021X && psta) // psk/802_1x
++	{
++		if(check_fwstate(pmlmepriv, WIFI_AP_STATE))
++		{
++			if(param->u.crypt.set_tx ==1) //pairwise key
++			{ 
++				_rtw_memcpy(psta->dot118021x_UncstKey.skey,  param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len));
++				
++				if(strcmp(param->u.crypt.alg, "WEP") == 0)
++				{
++					DBG_8192C("%s, set pairwise key, WEP\n", __FUNCTION__);
++					
++					psta->dot118021XPrivacy = _WEP40_;
++					if(param->u.crypt.key_len==13)
++					{						
++						psta->dot118021XPrivacy = _WEP104_;
++					}
++				}
++				else if(strcmp(param->u.crypt.alg, "TKIP") == 0)
++				{						
++					DBG_8192C("%s, set pairwise key, TKIP\n", __FUNCTION__);
++					
++					psta->dot118021XPrivacy = _TKIP_;
++				
++					//DEBUG_ERR("set key length :param->u.crypt.key_len=%d\n", param->u.crypt.key_len);
++					//set mic key
++					_rtw_memcpy(psta->dot11tkiptxmickey.skey, &(param->u.crypt.key[16]), 8);
++					_rtw_memcpy(psta->dot11tkiprxmickey.skey, &(param->u.crypt.key[24]), 8);
++
++					psecuritypriv->busetkipkey = _TRUE;
++											
++				}
++				else if(strcmp(param->u.crypt.alg, "CCMP") == 0)
++				{
++
++					DBG_8192C("%s, set pairwise key, CCMP\n", __FUNCTION__);
++					
++					psta->dot118021XPrivacy = _AES_;
++				}
++				else
++				{
++					DBG_8192C("%s, set pairwise key, none\n", __FUNCTION__);
++					
++					psta->dot118021XPrivacy = _NO_PRIVACY_;
++				}
++						
++				set_pairwise_key(padapter, psta);
++					
++				psta->ieee8021x_blocked = _FALSE;
++					
++				psta->bpairwise_key_installed = _TRUE;
++					
++			}			
++			else//group key???
++			{ 
++				if(strcmp(param->u.crypt.alg, "WEP") == 0)
++				{
++					_rtw_memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey,  param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len));
++					
++					psecuritypriv->dot118021XGrpPrivacy = _WEP40_;
++					if(param->u.crypt.key_len==13)
++					{						
++						psecuritypriv->dot118021XGrpPrivacy = _WEP104_;
++					}
++				}
++				else if(strcmp(param->u.crypt.alg, "TKIP") == 0)
++				{						
++					psecuritypriv->dot118021XGrpPrivacy = _TKIP_;
++
++					_rtw_memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey,  param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len));
++				
++					//DEBUG_ERR("set key length :param->u.crypt.key_len=%d\n", param->u.crypt.key_len);
++					//set mic key
++					_rtw_memcpy(psecuritypriv->dot118021XGrptxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[16]), 8);
++					_rtw_memcpy(psecuritypriv->dot118021XGrprxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[24]), 8);
++
++					psecuritypriv->busetkipkey = _TRUE;
++											
++				}
++				else if(strcmp(param->u.crypt.alg, "CCMP") == 0)
++				{
++					psecuritypriv->dot118021XGrpPrivacy = _AES_;
++
++					_rtw_memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey,  param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len));
++				}
++				else
++				{
++					psecuritypriv->dot118021XGrpPrivacy = _NO_PRIVACY_;
++				}
++
++				psecuritypriv->dot118021XGrpKeyid = param->u.crypt.idx;
++
++				psecuritypriv->binstallGrpkey = _TRUE;	
++								
++				psecuritypriv->dot11PrivacyAlgrthm = psecuritypriv->dot118021XGrpPrivacy;//!!!
++								
++				set_group_key(padapter, param->u.crypt.key, psecuritypriv->dot118021XGrpPrivacy, param->u.crypt.idx);
++			
++				pbcmc_sta=rtw_get_bcmc_stainfo(padapter);
++				if(pbcmc_sta)
++				{
++					pbcmc_sta->ieee8021x_blocked = _FALSE;
++					pbcmc_sta->dot118021XPrivacy= psecuritypriv->dot118021XGrpPrivacy;//rx will use bmc_sta's dot118021XPrivacy			
++				}					
++
++			}
++			
++		}
++				
++	}
++
++exit:
++
++	return ret;
++	
++}
++#endif
++
++static int rtw_cfg80211_set_encryption(struct net_device *dev, struct ieee_param *param, u32 param_len)
++{
++	int ret = 0;
++	u32 wep_key_idx, wep_key_len,wep_total_len;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_priv 	*pmlmepriv = &padapter->mlmepriv;		
++	struct security_priv *psecuritypriv = &padapter->securitypriv;
++#ifdef CONFIG_P2P
++	struct wifidirect_info* pwdinfo = &padapter->wdinfo;
++#endif //CONFIG_P2P
++
++_func_enter_;
++
++	DBG_8192C("%s\n", __func__);
++
++	param->u.crypt.err = 0;
++	param->u.crypt.alg[IEEE_CRYPT_ALG_NAME_LEN - 1] = '\0';
++
++	if (param_len < (u32) ((u8 *) param->u.crypt.key - (u8 *) param) + param->u.crypt.key_len)
++	{
++		ret =  -EINVAL;		
++		goto exit;
++	}
++
++	if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
++	    param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
++	    param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) 
++	{
++		if (param->u.crypt.idx >= WEP_KEYS
++#ifdef CONFIG_IEEE80211W
++			&& param->u.crypt.idx > BIP_MAX_KEYID
++#endif //CONFIG_IEEE80211W
++		)
++		{
++			ret = -EINVAL;
++			goto exit;
++		}
++	} else {
++		ret = -EINVAL;		
++		goto exit;
++	}
++
++	if (strcmp(param->u.crypt.alg, "WEP") == 0)
++	{
++		RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_err_,("wpa_set_encryption, crypt.alg = WEP\n"));
++		DBG_8192C("wpa_set_encryption, crypt.alg = WEP\n");
++
++		wep_key_idx = param->u.crypt.idx;
++		wep_key_len = param->u.crypt.key_len;
++
++		if ((wep_key_idx > WEP_KEYS) || (wep_key_len <= 0))
++		{
++			ret = -EINVAL;
++			goto exit;
++		}
++
++		if (psecuritypriv->bWepDefaultKeyIdxSet == 0)
++		{
++			//wep default key has not been set, so use this key index as default key.
++
++			wep_key_len = wep_key_len <= 5 ? 5 : 13;
++
++              	psecuritypriv->ndisencryptstatus = Ndis802_11Encryption1Enabled;
++			psecuritypriv->dot11PrivacyAlgrthm = _WEP40_;
++			psecuritypriv->dot118021XGrpPrivacy = _WEP40_;
++
++			if(wep_key_len==13)
++			{
++				psecuritypriv->dot11PrivacyAlgrthm = _WEP104_;
++				psecuritypriv->dot118021XGrpPrivacy = _WEP104_;
++			}
++
++			psecuritypriv->dot11PrivacyKeyIndex = wep_key_idx;
++		}
++			
++		_rtw_memcpy(&(psecuritypriv->dot11DefKey[wep_key_idx].skey[0]), param->u.crypt.key, wep_key_len);
++			
++		psecuritypriv->dot11DefKeylen[wep_key_idx] = wep_key_len;
++			
++		rtw_set_key(padapter, psecuritypriv, wep_key_idx, 0);
++
++		goto exit;		
++	}
++
++	if(padapter->securitypriv.dot11AuthAlgrthm == dot11AuthAlgrthm_8021X) // 802_1x
++	{
++		struct sta_info * psta,*pbcmc_sta;
++		struct sta_priv * pstapriv = &padapter->stapriv;
++
++		//DBG_8192C("%s, : dot11AuthAlgrthm == dot11AuthAlgrthm_8021X \n", __func__);
++
++		if (check_fwstate(pmlmepriv, WIFI_STATION_STATE | WIFI_MP_STATE) == _TRUE) //sta mode
++		{
++			psta = rtw_get_stainfo(pstapriv, get_bssid(pmlmepriv));				
++			if (psta == NULL) {
++				//DEBUG_ERR( ("Set wpa_set_encryption: Obtain Sta_info fail \n"));
++				DBG_8192C("%s, : Obtain Sta_info fail \n", __func__);
++			}
++			else
++			{
++				//Jeff: don't disable ieee8021x_blocked while clearing key
++				if (strcmp(param->u.crypt.alg, "none") != 0) 
++					psta->ieee8021x_blocked = _FALSE;
++
++				
++				if((padapter->securitypriv.ndisencryptstatus == Ndis802_11Encryption2Enabled)||
++						(padapter->securitypriv.ndisencryptstatus ==  Ndis802_11Encryption3Enabled))
++				{
++					psta->dot118021XPrivacy = padapter->securitypriv.dot11PrivacyAlgrthm;
++				}		
++
++				if(param->u.crypt.set_tx ==1)//pairwise key
++				{ 
++
++					DBG_8192C("%s, : param->u.crypt.set_tx ==1 \n", __func__);
++					
++					_rtw_memcpy(psta->dot118021x_UncstKey.skey,  param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len));
++					
++					if(strcmp(param->u.crypt.alg, "TKIP") == 0)//set mic key
++					{						
++						//DEBUG_ERR(("\nset key length :param->u.crypt.key_len=%d\n", param->u.crypt.key_len));
++						_rtw_memcpy(psta->dot11tkiptxmickey.skey, &(param->u.crypt.key[16]), 8);
++						_rtw_memcpy(psta->dot11tkiprxmickey.skey, &(param->u.crypt.key[24]), 8);
++
++						padapter->securitypriv.busetkipkey=_FALSE;
++						//_set_timer(&padapter->securitypriv.tkip_timer, 50);						
++					}
++
++					//DEBUG_ERR((" param->u.crypt.key_len=%d\n",param->u.crypt.key_len));
++					DBG_871X(" ~~~~set sta key:unicastkey\n");
++					
++					rtw_setstakey_cmd(padapter, (unsigned char *)psta, _TRUE);
++				}
++				else//group key
++				{
++					if(strcmp(param->u.crypt.alg, "TKIP") == 0 || strcmp(param->u.crypt.alg, "CCMP") == 0)
++					{
++						_rtw_memcpy(padapter->securitypriv.dot118021XGrpKey[param->u.crypt.idx].skey,  param->u.crypt.key,(param->u.crypt.key_len>16 ?16:param->u.crypt.key_len));
++						_rtw_memcpy(padapter->securitypriv.dot118021XGrptxmickey[param->u.crypt.idx].skey,&(param->u.crypt.key[16]),8);
++						_rtw_memcpy(padapter->securitypriv.dot118021XGrprxmickey[param->u.crypt.idx].skey,&(param->u.crypt.key[24]),8);
++	                                        padapter->securitypriv.binstallGrpkey = _TRUE;	
++						//DEBUG_ERR((" param->u.crypt.key_len=%d\n", param->u.crypt.key_len));
++						DBG_871X(" ~~~~set sta key:groupkey\n");
++	
++						padapter->securitypriv.dot118021XGrpKeyid = param->u.crypt.idx;
++	
++						rtw_set_key(padapter,&padapter->securitypriv,param->u.crypt.idx, 1);
++					}
++#ifdef CONFIG_IEEE80211W
++					else if(strcmp(param->u.crypt.alg, "BIP") == 0)
++					{
++						int no;
++						//DBG_871X("BIP key_len=%d , index=%d @@@@@@@@@@@@@@@@@@\n", param->u.crypt.key_len, param->u.crypt.idx);
++						//save the IGTK key, length 16 bytes
++						_rtw_memcpy(padapter->securitypriv.dot11wBIPKey[param->u.crypt.idx].skey,  param->u.crypt.key,(param->u.crypt.key_len>16 ?16:param->u.crypt.key_len));
++						/*DBG_871X("IGTK key below:\n");
++						for(no=0;no<16;no++)
++							printk(" %02x ", padapter->securitypriv.dot11wBIPKey[param->u.crypt.idx].skey[no]);
++						DBG_871X("\n");*/
++						padapter->securitypriv.dot11wBIPKeyid = param->u.crypt.idx;
++						padapter->securitypriv.binstallBIPkey = _TRUE;
++						DBG_871X(" ~~~~set sta key:IGKT\n");
++					}
++#endif //CONFIG_IEEE80211W
++					
++#ifdef CONFIG_P2P
++					if(pwdinfo->driver_interface == DRIVER_CFG80211 )
++					{
++						if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_PROVISIONING_ING))
++						{
++							rtw_p2p_set_state(pwdinfo, P2P_STATE_PROVISIONING_DONE);
++						}
++					}
++#endif //CONFIG_P2P
++					
++				}						
++			}
++
++			pbcmc_sta=rtw_get_bcmc_stainfo(padapter);
++			if(pbcmc_sta==NULL)
++			{
++				//DEBUG_ERR( ("Set OID_802_11_ADD_KEY: bcmc stainfo is null \n"));
++			}
++			else
++			{
++				//Jeff: don't disable ieee8021x_blocked while clearing key
++				if (strcmp(param->u.crypt.alg, "none") != 0) 
++					pbcmc_sta->ieee8021x_blocked = _FALSE;
++				
++				if((padapter->securitypriv.ndisencryptstatus == Ndis802_11Encryption2Enabled)||
++						(padapter->securitypriv.ndisencryptstatus ==  Ndis802_11Encryption3Enabled))
++				{							
++					pbcmc_sta->dot118021XPrivacy = padapter->securitypriv.dot11PrivacyAlgrthm;
++				}					
++			}				
++		}
++		else if(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE)) //adhoc mode
++		{		
++		}			
++	}
++
++exit:
++
++	DBG_8192C("%s, ret=%d\n", __func__, ret);
++	
++	_func_exit_;
++	
++	return ret;	
++}
++
++static int cfg80211_rtw_add_key(struct wiphy *wiphy, struct net_device *ndev,
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE)
++				u8 key_index, bool pairwise, const u8 *mac_addr,
++#else	// (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37))
++				u8 key_index, const u8 *mac_addr,
++#endif	// (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37))
++				struct key_params *params)
++{
++	char *alg_name;
++	u32 param_len;
++	struct ieee_param *param = NULL;	
++	int ret=0;
++	struct wireless_dev *rtw_wdev = wiphy_to_wdev(wiphy);
++	_adapter *padapter = wiphy_to_adapter(wiphy);
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	
++	DBG_871X(FUNC_NDEV_FMT" adding key for %pM\n", FUNC_NDEV_ARG(ndev), mac_addr);
++	DBG_871X("cipher=0x%x\n", params->cipher);
++	DBG_871X("key_len=0x%x\n", params->key_len);
++	DBG_871X("seq_len=0x%x\n", params->seq_len);
++	DBG_871X("key_index=%d\n", key_index);
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE)
++	DBG_871X("pairwise=%d\n", pairwise);
++#endif	// (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37))
++
++	param_len = sizeof(struct ieee_param) + params->key_len;
++	param = (struct ieee_param *)rtw_malloc(param_len);
++	if (param == NULL)
++		return -1;
++	
++	_rtw_memset(param, 0, param_len);
++
++	param->cmd = IEEE_CMD_SET_ENCRYPTION;
++	_rtw_memset(param->sta_addr, 0xff, ETH_ALEN);
++
++	switch (params->cipher) {
++	case IW_AUTH_CIPHER_NONE:
++		//todo: remove key 
++		//remove = 1;	
++		alg_name = "none";
++		break;
++	case WLAN_CIPHER_SUITE_WEP40:
++	case WLAN_CIPHER_SUITE_WEP104:
++		alg_name = "WEP";
++		break;
++	case WLAN_CIPHER_SUITE_TKIP:
++		alg_name = "TKIP";
++		break;
++	case WLAN_CIPHER_SUITE_CCMP:
++		alg_name = "CCMP";
++		break;
++#ifdef CONFIG_IEEE80211W
++	case WLAN_CIPHER_SUITE_AES_CMAC:
++		alg_name = "BIP";
++		break;
++#endif //CONFIG_IEEE80211W
++	default:	
++		return -ENOTSUPP;
++	}
++	
++	strncpy((char *)param->u.crypt.alg, alg_name, IEEE_CRYPT_ALG_NAME_LEN);
++	
++
++	if (!mac_addr || is_broadcast_ether_addr(mac_addr))
++	{
++		param->u.crypt.set_tx = 0; //for wpa/wpa2 group key
++	} else {
++		param->u.crypt.set_tx = 1; //for wpa/wpa2 pairwise key
++	}
++	
++	
++	//param->u.crypt.idx = key_index - 1;
++	param->u.crypt.idx = key_index;
++	
++	if (params->seq_len && params->seq) 
++	{	
++		_rtw_memcpy(param->u.crypt.seq, params->seq, params->seq_len);
++	}
++
++	if(params->key_len && params->key)
++	{
++		param->u.crypt.key_len = params->key_len;		
++		_rtw_memcpy(param->u.crypt.key, params->key, params->key_len);
++	}	
++
++	if(check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _TRUE)
++	{
++		ret =  rtw_cfg80211_set_encryption(ndev, param, param_len);	
++	}
++	else if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE)
++	{
++#ifdef CONFIG_AP_MODE
++		if(mac_addr)
++			_rtw_memcpy(param->sta_addr, (void*)mac_addr, ETH_ALEN);
++	
++		ret = rtw_cfg80211_ap_set_encryption(ndev, param, param_len);
++#endif
++	}
++	else
++	{
++		DBG_8192C("error! fw_state=0x%x, iftype=%d\n", pmlmepriv->fw_state, rtw_wdev->iftype);
++		
++	}
++
++	if(param)
++	{
++		rtw_mfree((u8*)param, param_len);
++	}
++
++	return ret;
++
++}
++
++static int cfg80211_rtw_get_key(struct wiphy *wiphy, struct net_device *ndev,
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE)
++				u8 key_index, bool pairwise, const u8 *mac_addr,
++#else	// (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37))
++				u8 key_index, const u8 *mac_addr,
++#endif	// (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37))
++				void *cookie,
++				void (*callback)(void *cookie,
++						 struct key_params*))
++{
++#if 0
++	struct iwm_priv *iwm = ndev_to_iwm(ndev);
++	struct iwm_key *key = &iwm->keys[key_index];
++	struct key_params params;
++
++	IWM_DBG_WEXT(iwm, DBG, "Getting key %d\n", key_index);
++
++	memset(&params, 0, sizeof(params));
++
++	params.cipher = key->cipher;
++	params.key_len = key->key_len;
++	params.seq_len = key->seq_len;
++	params.seq = key->seq;
++	params.key = key->key;
++
++	callback(cookie, &params);
++
++	return key->key_len ? 0 : -ENOENT;
++#endif
++	DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev));
++	return 0;
++}
++
++static int cfg80211_rtw_del_key(struct wiphy *wiphy, struct net_device *ndev,
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE)
++				u8 key_index, bool pairwise, const u8 *mac_addr)
++#else	// (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37))
++				u8 key_index, const u8 *mac_addr)
++#endif	// (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37))
++{
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(ndev);		
++	struct security_priv *psecuritypriv = &padapter->securitypriv;
++
++	DBG_871X(FUNC_NDEV_FMT" key_index=%d\n", FUNC_NDEV_ARG(ndev), key_index);
++
++	if (key_index == psecuritypriv->dot11PrivacyKeyIndex)
++	{
++		//clear the flag of wep default key set.
++		psecuritypriv->bWepDefaultKeyIdxSet = 0;
++	}
++
++	return 0;
++}
++
++static int cfg80211_rtw_set_default_key(struct wiphy *wiphy,
++	struct net_device *ndev, u8 key_index
++	#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)) || defined(COMPAT_KERNEL_RELEASE)
++	, bool unicast, bool multicast
++	#endif
++	)
++{
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(ndev);		
++	struct security_priv *psecuritypriv = &padapter->securitypriv;
++
++		DBG_871X(FUNC_NDEV_FMT" key_index=%d"
++		#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)) || defined(COMPAT_KERNEL_RELEASE)
++		", unicast=%d, multicast=%d"
++		#endif
++		".\n", FUNC_NDEV_ARG(ndev), key_index
++		#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)) || defined(COMPAT_KERNEL_RELEASE)
++		, unicast, multicast
++		#endif
++		);
++
++	if ((key_index < WEP_KEYS) && ((psecuritypriv->dot11PrivacyAlgrthm == _WEP40_) || (psecuritypriv->dot11PrivacyAlgrthm == _WEP104_))) //set wep default key
++	{
++		psecuritypriv->ndisencryptstatus = Ndis802_11Encryption1Enabled;
++
++		psecuritypriv->dot11PrivacyKeyIndex = key_index;
++
++		psecuritypriv->dot11PrivacyAlgrthm = _WEP40_;
++		psecuritypriv->dot118021XGrpPrivacy = _WEP40_;
++		if (psecuritypriv->dot11DefKeylen[key_index] == 13)
++		{
++			psecuritypriv->dot11PrivacyAlgrthm = _WEP104_;
++			psecuritypriv->dot118021XGrpPrivacy = _WEP104_;
++		}
++
++		psecuritypriv->bWepDefaultKeyIdxSet = 1; //set the flag to represent that wep default key has been set
++	}
++
++	return 0;
++
++}
++
++static int cfg80211_rtw_get_station(struct wiphy *wiphy,
++				    struct net_device *ndev,
++				    u8 *mac, struct station_info *sinfo)
++{
++	int ret = 0;
++	_adapter *padapter = wiphy_to_adapter(wiphy);
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	struct sta_info *psta = NULL;
++	struct sta_priv *pstapriv = &padapter->stapriv;
++
++	sinfo->filled = 0;
++
++	if (!mac) {
++		DBG_871X(FUNC_NDEV_FMT" mac==%p\n", FUNC_NDEV_ARG(ndev), mac);
++		ret = -ENOENT;
++		goto exit;
++	}
++
++	psta = rtw_get_stainfo(pstapriv, mac);
++	if (psta == NULL) {
++		DBG_8192C("%s, sta_info is null\n", __func__);
++		ret = -ENOENT;
++		goto exit;
++	}
++
++#ifdef CONFIG_DEBUG_CFG80211
++	DBG_871X(FUNC_NDEV_FMT" mac="MAC_FMT"\n", FUNC_NDEV_ARG(ndev), MAC_ARG(mac));
++#endif
++
++	//for infra./P2PClient mode
++	if(	check_fwstate(pmlmepriv, WIFI_STATION_STATE)
++		&& check_fwstate(pmlmepriv, _FW_LINKED)
++	)
++	{
++		struct wlan_network  *cur_network = &(pmlmepriv->cur_network);
++
++		if (_rtw_memcmp(mac, cur_network->network.MacAddress, ETH_ALEN) == _FALSE) {
++			DBG_871X("%s, mismatch bssid="MAC_FMT"\n", __func__, MAC_ARG(cur_network->network.MacAddress));
++			ret = -ENOENT;
++			goto exit;
++		}
++
++		sinfo->filled |= STATION_INFO_SIGNAL;
++		sinfo->signal = translate_percentage_to_dbm(padapter->recvpriv.signal_strength);
++
++		sinfo->filled |= STATION_INFO_TX_BITRATE;
++		sinfo->txrate.legacy = rtw_get_cur_max_rate(padapter);
++
++		sinfo->filled |= STATION_INFO_RX_PACKETS;
++		sinfo->rx_packets = sta_rx_data_pkts(psta);
++
++		sinfo->filled |= STATION_INFO_TX_PACKETS;
++		sinfo->tx_packets = psta->sta_stats.tx_pkts;
++
++	}
++
++	//for Ad-Hoc/AP mode
++	if ((check_fwstate(pmlmepriv, WIFI_ADHOC_STATE)
++			||check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE)
++			||check_fwstate(pmlmepriv, WIFI_AP_STATE))
++		&& check_fwstate(pmlmepriv, _FW_LINKED)
++	)
++	{
++		//TODO: should acquire station info...
++	}
++
++exit:
++	return ret;
++}
++
++extern int netdev_open(struct net_device *pnetdev);
++#ifdef CONFIG_CONCURRENT_MODE
++extern int netdev_if2_open(struct net_device *pnetdev);
++#endif
++
++/*
++enum nl80211_iftype {
++	NL80211_IFTYPE_UNSPECIFIED,
++       NL80211_IFTYPE_ADHOC, //1
++       NL80211_IFTYPE_STATION, //2
++       NL80211_IFTYPE_AP, //3
++       NL80211_IFTYPE_AP_VLAN,
++       NL80211_IFTYPE_WDS,
++       NL80211_IFTYPE_MONITOR, //6
++       NL80211_IFTYPE_MESH_POINT,
++       NL80211_IFTYPE_P2P_CLIENT, //8
++	NL80211_IFTYPE_P2P_GO, //9
++       //keep last 
++       NUM_NL80211_IFTYPES,
++       NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1
++};
++*/
++static int cfg80211_rtw_change_iface(struct wiphy *wiphy,
++				     struct net_device *ndev,
++				     enum nl80211_iftype type, u32 *flags,
++				     struct vif_params *params)
++{
++	enum nl80211_iftype old_type;
++	NDIS_802_11_NETWORK_INFRASTRUCTURE networkType ;
++	_adapter *padapter = wiphy_to_adapter(wiphy);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct wireless_dev *rtw_wdev = wiphy_to_wdev(wiphy);
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	_irqL irqL;
++	_queue *queue = &pmlmepriv->scanned_queue;
++#ifdef CONFIG_P2P
++	struct wifidirect_info *pwdinfo= &(padapter->wdinfo);
++#endif
++	int ret = 0;
++	u8 change = _FALSE;
++
++	if (adapter_to_dvobj(padapter)->processing_dev_remove == _TRUE) {
++		ret= -EPERM;
++		goto exit;
++	}
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if(padapter->adapter_type == SECONDARY_ADAPTER)
++	{
++		DBG_871X(FUNC_NDEV_FMT" call netdev_if2_open\n", FUNC_NDEV_ARG(ndev));
++		if(netdev_if2_open(ndev) != 0) {
++			ret= -EPERM;
++			goto exit;
++		}
++	}
++	else if(padapter->adapter_type == PRIMARY_ADAPTER)
++#endif //CONFIG_CONCURRENT_MODE
++	{
++		DBG_871X(FUNC_NDEV_FMT" call netdev_open\n", FUNC_NDEV_ARG(ndev));
++		if(netdev_open(ndev) != 0) {
++			ret= -EPERM;
++			goto exit;
++		}
++	}
++
++	if(_FAIL == rtw_pwr_wakeup(padapter)) {
++		ret= -EPERM;
++		goto exit;
++	}
++
++	old_type = rtw_wdev->iftype;
++	DBG_871X(FUNC_NDEV_FMT" old_iftype=%d, new_iftype=%d\n",
++		FUNC_NDEV_ARG(ndev), old_type, type);
++
++	if(old_type != type)
++	{
++		change = _TRUE;
++		pmlmeext->action_public_rxseq = 0xffff;
++		pmlmeext->action_public_dialog_token = 0xff;
++	}	
++		
++	switch (type) {
++	case NL80211_IFTYPE_ADHOC:
++		networkType = Ndis802_11IBSS;
++		break;
++#if defined(CONFIG_P2P) && ((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE))
++	case NL80211_IFTYPE_P2P_CLIENT:
++#endif
++	case NL80211_IFTYPE_STATION:
++		networkType = Ndis802_11Infrastructure;
++		#ifdef CONFIG_P2P
++		if(pwdinfo->driver_interface == DRIVER_CFG80211 )
++		{
++			if(change && rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO))
++			{
++				_cancel_timer_ex( &pwdinfo->find_phase_timer );
++				_cancel_timer_ex( &pwdinfo->restore_p2p_state_timer );
++				_cancel_timer_ex( &pwdinfo->pre_tx_scan_timer);
++
++				//it means remove GO and change mode from AP(GO) to station(P2P DEVICE)
++				rtw_p2p_set_role(pwdinfo, P2P_ROLE_DEVICE);
++				rtw_p2p_set_state(pwdinfo, rtw_p2p_pre_state(pwdinfo));
++
++				DBG_8192C("%s, role=%d, p2p_state=%d, pre_p2p_state=%d\n", __func__, rtw_p2p_role(pwdinfo), rtw_p2p_state(pwdinfo), rtw_p2p_pre_state(pwdinfo));
++			}
++		}
++		#endif //CONFIG_P2P
++		break;
++#if defined(CONFIG_P2P) && ((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE))
++	case NL80211_IFTYPE_P2P_GO:
++#endif
++	case NL80211_IFTYPE_AP:
++		networkType = Ndis802_11APMode;
++		#ifdef CONFIG_P2P
++		if(pwdinfo->driver_interface == DRIVER_CFG80211 )
++		{
++			if(change && !rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++			{
++				//it means P2P Group created, we will be GO and change mode from  P2P DEVICE to AP(GO)
++				rtw_p2p_set_role(pwdinfo, P2P_ROLE_GO);
++			}
++		}
++		#endif //CONFIG_P2P
++		break;		
++	default:
++		return -EOPNOTSUPP;
++	}
++
++	rtw_wdev->iftype = type;
++	
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++	_enter_critical_bh(&queue->lock, &irqL);
++	
++	if (rtw_set_802_11_infrastructure_mode(padapter, networkType) ==_FALSE)
++	{
++		rtw_wdev->iftype = old_type;
++		ret = -EPERM;
++		_exit_critical_bh(&queue->lock, &irqL);
++		_exit_critical_bh(&pmlmepriv->lock, &irqL);
++		goto exit;
++	}
++	_exit_critical_bh(&queue->lock, &irqL);
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++
++	rtw_setopmode_cmd(padapter, networkType);	
++	
++exit:
++
++	return ret;
++}
++
++void rtw_cfg80211_indicate_scan_done(struct rtw_wdev_priv *pwdev_priv, bool aborted)
++{
++	_irqL	irqL;
++
++	_enter_critical_bh(&pwdev_priv->scan_req_lock, &irqL);
++	if(pwdev_priv->scan_request != NULL)
++	{
++		//struct cfg80211_scan_request *scan_request = pwdev_priv->scan_request;
++	
++		#ifdef CONFIG_DEBUG_CFG80211
++		DBG_871X("%s with scan req\n", __FUNCTION__);	
++		#endif
++
++		//avoid WARN_ON(request != wiphy_to_dev(request->wiphy)->scan_req);
++		//if(scan_request == wiphy_to_dev(scan_request->wiphy)->scan_req)
++		if(pwdev_priv->scan_request->wiphy != pwdev_priv->rtw_wdev->wiphy)
++		{
++			DBG_8192C("error wiphy compare\n");
++		}
++		else
++		{
++			cfg80211_scan_done(pwdev_priv->scan_request, aborted);
++		}
++
++		pwdev_priv->scan_request = NULL;
++		
++	} else {
++		#ifdef CONFIG_DEBUG_CFG80211
++		DBG_871X("%s without scan req\n", __FUNCTION__);
++		#endif
++	}
++	_exit_critical_bh(&pwdev_priv->scan_req_lock, &irqL);
++}
++
++void rtw_cfg80211_surveydone_event_callback(_adapter *padapter)
++{
++	_irqL	irqL;
++	_list					*plist, *phead;	
++	struct	mlme_priv	*pmlmepriv = &(padapter->mlmepriv);	
++	_queue				*queue	= &(pmlmepriv->scanned_queue);	
++	struct	wlan_network	*pnetwork = NULL;
++	u32 cnt=0;
++	u32 wait_for_surveydone;
++	sint wait_status;
++#ifdef CONFIG_P2P
++	struct	wifidirect_info*	pwdinfo = &padapter->wdinfo;
++#endif //CONFIG_P2P
++	struct rtw_wdev_priv *pwdev_priv = wdev_to_priv(padapter->rtw_wdev);
++	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
++
++#ifdef CONFIG_DEBUG_CFG80211
++	DBG_8192C("%s\n", __func__);
++#endif
++
++	_enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++
++	phead = get_list_head(queue);
++	plist = get_next(phead);
++       
++	while(1)
++	{
++		if (rtw_end_of_queue_search(phead,plist)== _TRUE)
++			break;
++
++		pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list);
++
++		//report network only if the current channel set contains the channel to which this network belongs
++		if(rtw_ch_set_search_ch(padapter->mlmeextpriv.channel_set, pnetwork->network.Configuration.DSConfig) >= 0
++			&& rtw_mlme_band_check(padapter, pnetwork->network.Configuration.DSConfig) == _TRUE
++			&& _TRUE == rtw_validate_ssid(&(pnetwork->network.Ssid))
++		)
++		{		
++			//ev=translate_scan(padapter, a, pnetwork, ev, stop);
++			rtw_cfg80211_inform_bss(padapter, pnetwork);		
++		}
++
++		plist = get_next(plist);
++	
++	}
++	
++	_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++	
++	//call this after other things have been done
++	rtw_cfg80211_indicate_scan_done(wdev_to_priv(padapter->rtw_wdev), _FALSE);
++}
++
++static int rtw_cfg80211_set_probe_req_wpsp2pie(_adapter *padapter, char *buf, int len)
++{
++	int ret = 0;
++	uint wps_ielen = 0;
++	u8 *wps_ie;
++	u32	p2p_ielen = 0;	
++	u8 *p2p_ie;
++	u32	wfd_ielen = 0;	
++	u8 *wfd_ie;
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);	
++
++#ifdef CONFIG_DEBUG_CFG80211
++	DBG_8192C("%s, ielen=%d\n", __func__, len);
++#endif
++	
++	if(len>0)
++	{
++		if((wps_ie = rtw_get_wps_ie(buf, len, NULL, &wps_ielen)))
++		{
++			#ifdef CONFIG_DEBUG_CFG80211
++			DBG_8192C("probe_req_wps_ielen=%d\n", wps_ielen);
++			#endif
++			
++			if(pmlmepriv->wps_probe_req_ie)
++			{
++				u32 free_len = pmlmepriv->wps_probe_req_ie_len;
++				pmlmepriv->wps_probe_req_ie_len = 0;
++				rtw_mfree(pmlmepriv->wps_probe_req_ie, free_len);
++				pmlmepriv->wps_probe_req_ie = NULL;			
++			}	
++
++			pmlmepriv->wps_probe_req_ie = rtw_malloc(wps_ielen);
++			if ( pmlmepriv->wps_probe_req_ie == NULL) {
++				DBG_8192C("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__);
++				return -EINVAL;
++			
++			}
++			_rtw_memcpy(pmlmepriv->wps_probe_req_ie, wps_ie, wps_ielen);
++			pmlmepriv->wps_probe_req_ie_len = wps_ielen;
++		}
++
++		//buf += wps_ielen;
++		//len -= wps_ielen;
++
++		#ifdef CONFIG_P2P
++		if((p2p_ie=rtw_get_p2p_ie(buf, len, NULL, &p2p_ielen))) 
++		{
++			struct wifidirect_info *wdinfo = &padapter->wdinfo;
++			u32 attr_contentlen = 0;
++			u8 listen_ch_attr[5];
++
++			#ifdef CONFIG_DEBUG_CFG80211
++			DBG_8192C("probe_req_p2p_ielen=%d\n", p2p_ielen);
++			#endif
++			
++			if(pmlmepriv->p2p_probe_req_ie)
++			{
++				u32 free_len = pmlmepriv->p2p_probe_req_ie_len;
++				pmlmepriv->p2p_probe_req_ie_len = 0;
++				rtw_mfree(pmlmepriv->p2p_probe_req_ie, free_len);
++				pmlmepriv->p2p_probe_req_ie = NULL;
++			}	
++
++			pmlmepriv->p2p_probe_req_ie = rtw_malloc(p2p_ielen);
++			if ( pmlmepriv->p2p_probe_req_ie == NULL) {
++				DBG_8192C("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__);
++				return -EINVAL;
++			
++			}
++			_rtw_memcpy(pmlmepriv->p2p_probe_req_ie, p2p_ie, p2p_ielen);
++			pmlmepriv->p2p_probe_req_ie_len = p2p_ielen;
++
++			if(rtw_get_p2p_attr_content(p2p_ie, p2p_ielen, P2P_ATTR_LISTEN_CH, (u8*)listen_ch_attr, (uint*) &attr_contentlen)
++				&& attr_contentlen == 5)
++			{
++				if (wdinfo->listen_channel !=  listen_ch_attr[4]) {
++					DBG_871X(FUNC_ADPT_FMT" listen channel - country:%c%c%c, class:%u, ch:%u\n",
++						FUNC_ADPT_ARG(padapter), listen_ch_attr[0], listen_ch_attr[1], listen_ch_attr[2],
++						listen_ch_attr[3], listen_ch_attr[4]);
++					wdinfo->listen_channel = listen_ch_attr[4];
++				}
++			}
++		}
++		#endif //CONFIG_P2P
++		
++		//buf += p2p_ielen;
++		//len -= p2p_ielen;
++
++		#ifdef CONFIG_WFD
++		if(rtw_get_wfd_ie(buf, len, NULL, &wfd_ielen)) 
++		{
++			#ifdef CONFIG_DEBUG_CFG80211
++			DBG_8192C("probe_req_wfd_ielen=%d\n", wfd_ielen);
++			#endif
++			
++			if(pmlmepriv->wfd_probe_req_ie)
++			{
++				u32 free_len = pmlmepriv->wfd_probe_req_ie_len;
++				pmlmepriv->wfd_probe_req_ie_len = 0;
++				rtw_mfree(pmlmepriv->wfd_probe_req_ie, free_len);
++				pmlmepriv->wfd_probe_req_ie = NULL;
++			}	
++
++			pmlmepriv->wfd_probe_req_ie = rtw_malloc(wfd_ielen);
++			if ( pmlmepriv->wfd_probe_req_ie == NULL) {
++				DBG_8192C("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__);
++				return -EINVAL;
++			
++			}
++			rtw_get_wfd_ie(buf, len, pmlmepriv->wfd_probe_req_ie, &pmlmepriv->wfd_probe_req_ie_len);			
++		}
++		#endif //CONFIG_WFD
++		
++	}
++
++	return ret;
++	
++}
++
++static int cfg80211_rtw_scan(struct wiphy *wiphy
++	#if (LINUX_VERSION_CODE < KERNEL_VERSION(3, 6, 0))
++	, struct net_device *ndev
++	#endif
++	, struct cfg80211_scan_request *request)
++{
++	int i;
++	u8 _status = _FALSE;
++	int ret = 0;	
++	_adapter *padapter = wiphy_to_adapter(wiphy);
++	struct mlme_priv *pmlmepriv= &padapter->mlmepriv;
++	NDIS_802_11_SSID ssid[RTW_SSID_SCAN_AMOUNT];
++	struct rtw_ieee80211_channel ch[RTW_CHANNEL_SCAN_AMOUNT];
++	_irqL	irqL;
++	u8 *wps_ie=NULL;
++	uint wps_ielen=0;	
++	u8 *p2p_ie=NULL;
++	uint p2p_ielen=0;
++	u8 survey_times=3;
++	u8 survey_times_for_one_ch=6;
++#ifdef CONFIG_P2P
++	struct wifidirect_info *pwdinfo= &(padapter->wdinfo);	
++#endif //CONFIG_P2P
++	struct rtw_wdev_priv *pwdev_priv = wdev_to_priv(padapter->rtw_wdev);
++	struct cfg80211_ssid *ssids = request->ssids;
++	int social_channel = 0, j = 0;
++	bool need_indicate_scan_done = _FALSE;
++#ifdef CONFIG_CONCURRENT_MODE	
++	PADAPTER pbuddy_adapter = NULL;
++	struct mlme_priv *pbuddy_mlmepriv = NULL;
++#endif //CONFIG_CONCURRENT_MODE
++
++//#ifdef CONFIG_DEBUG_CFG80211
++	DBG_871X(FUNC_ADPT_FMT"\n", FUNC_ADPT_ARG(padapter));
++//#endif
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if (padapter->pbuddy_adapter) {
++		pbuddy_adapter = padapter->pbuddy_adapter;
++		pbuddy_mlmepriv = &(pbuddy_adapter->mlmepriv);	
++	}
++#endif //CONFIG_CONCURRENT_MODE
++
++#ifdef CONFIG_MP_INCLUDED
++	if (check_fwstate(pmlmepriv, WIFI_MP_STATE) == _TRUE)
++	{
++		ret = -EPERM;
++		goto exit;
++	}
++#endif
++
++	_enter_critical_bh(&pwdev_priv->scan_req_lock, &irqL);
++	pwdev_priv->scan_request = request;
++	_exit_critical_bh(&pwdev_priv->scan_req_lock, &irqL);
++
++	if (check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE)
++	{
++#ifdef CONFIG_DEBUG_CFG80211
++		DBG_871X("%s under WIFI_AP_STATE\n", __FUNCTION__);
++#endif
++
++		if (check_fwstate(pmlmepriv, WIFI_UNDER_WPS|_FW_UNDER_SURVEY|_FW_UNDER_LINKING) == _TRUE)
++		{
++			DBG_8192C("%s, fwstate=0x%x\n", __func__, pmlmepriv->fw_state);
++
++			if(check_fwstate(pmlmepriv, WIFI_UNDER_WPS))
++			{
++				DBG_8192C("AP mode process WPS \n");
++			}
++
++			need_indicate_scan_done = _TRUE;
++			goto check_need_indicate_scan_done;
++		}
++	}
++
++	if(_FAIL == rtw_pwr_wakeup(padapter)) {
++		need_indicate_scan_done = _TRUE;
++		goto check_need_indicate_scan_done;
++	}
++
++	#ifdef CONFIG_P2P
++	if( pwdinfo->driver_interface == DRIVER_CFG80211 )
++	{
++		if(ssids->ssid != NULL
++			&& _rtw_memcmp(ssids->ssid, "DIRECT-", 7)
++			&& rtw_get_p2p_ie((u8 *)request->ie, request->ie_len, NULL, NULL)
++		)
++		{
++			if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++			{
++				u32 initialgain = 0x30;
++				rtw_p2p_enable(padapter, P2P_ROLE_DEVICE);
++				wdev_to_priv(padapter->rtw_wdev)->p2p_enabled = _TRUE;
++				padapter->HalFunc.SetHwRegHandler(padapter, HW_VAR_INITIAL_GAIN, (u8 *)&(initialgain));
++				padapter->HalFunc.SetHwRegHandler(padapter, HW_VAR_INITIAL_GAIN, (u8 *)&(initialgain));
++			}
++			else
++			{
++				rtw_p2p_set_pre_state(pwdinfo, rtw_p2p_state(pwdinfo));
++				#ifdef CONFIG_DEBUG_CFG80211
++				DBG_8192C("%s, role=%d, p2p_state=%d\n", __func__, rtw_p2p_role(pwdinfo), rtw_p2p_state(pwdinfo));
++				#endif
++			}
++			rtw_p2p_set_state(pwdinfo, P2P_STATE_LISTEN);
++		
++			if(request->n_channels == 3 &&
++				request->channels[0]->hw_value == 1 &&
++				request->channels[1]->hw_value == 6 &&
++				request->channels[2]->hw_value == 11
++			)
++			{
++				social_channel = 1;
++			}
++		}
++	}
++	#endif //CONFIG_P2P
++
++	if(request->ie && request->ie_len>0)
++	{
++		rtw_cfg80211_set_probe_req_wpsp2pie(padapter, (u8 *)request->ie, request->ie_len );
++	}
++
++	if (pmlmepriv->LinkDetectInfo.bBusyTraffic == _TRUE)
++	{
++		DBG_8192C("%s, bBusyTraffic == _TRUE\n", __func__);
++		need_indicate_scan_done = _TRUE;
++		goto check_need_indicate_scan_done;
++	}
++	if (rtw_is_scan_deny(padapter)){
++		DBG_871X(FUNC_ADPT_FMT  ": scan deny\n", FUNC_ADPT_ARG(padapter));
++		need_indicate_scan_done = _TRUE;
++		goto check_need_indicate_scan_done;
++	}
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if(pbuddy_mlmepriv && (pbuddy_mlmepriv->LinkDetectInfo.bBusyTraffic == _TRUE))	
++	{
++		DBG_8192C("%s, bBusyTraffic == _TRUE at buddy_intf\n", __func__);
++		need_indicate_scan_done = _TRUE;
++		goto check_need_indicate_scan_done;
++	}
++#endif //CONFIG_CONCURRENT_MODE
++
++	if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == _TRUE)
++	{
++		DBG_8192C("%s, fwstate=0x%x\n", __func__, pmlmepriv->fw_state);
++		need_indicate_scan_done = _TRUE;
++		goto check_need_indicate_scan_done;
++	} 
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if (check_buddy_fwstate(padapter,
++		_FW_UNDER_SURVEY|_FW_UNDER_LINKING|WIFI_UNDER_WPS) == _TRUE)
++	{		
++		if(check_buddy_fwstate(padapter, _FW_UNDER_SURVEY))
++		{
++			DBG_8192C("scanning_via_buddy_intf\n");
++			pmlmepriv->scanning_via_buddy_intf = _TRUE;
++		}		
++
++		DBG_8192C("buddy_intf's mlme state:0x%x\n", pbuddy_mlmepriv->fw_state);
++		
++		need_indicate_scan_done = _TRUE;
++		goto check_need_indicate_scan_done;
++	}
++#endif
++
++
++#ifdef CONFIG_P2P
++	if( pwdinfo->driver_interface == DRIVER_CFG80211 )
++	{
++		if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE) && !rtw_p2p_chk_state(pwdinfo, P2P_STATE_IDLE))
++		{
++			rtw_p2p_set_state(pwdinfo, P2P_STATE_FIND_PHASE_SEARCH);
++			rtw_free_network_queue(padapter, _TRUE);
++
++			if(social_channel == 0)
++				rtw_p2p_findphase_ex_set(pwdinfo, P2P_FINDPHASE_EX_NONE);
++			else
++				rtw_p2p_findphase_ex_set(pwdinfo, P2P_FINDPHASE_EX_SOCIAL_LAST);
++		}
++	}
++#endif //CONFIG_P2P
++
++
++	_rtw_memset(ssid, 0, sizeof(NDIS_802_11_SSID)*RTW_SSID_SCAN_AMOUNT);
++	//parsing request ssids, n_ssids
++	for (i = 0; i < request->n_ssids && i < RTW_SSID_SCAN_AMOUNT; i++) {
++		#ifdef CONFIG_DEBUG_CFG80211
++		DBG_8192C("ssid=%s, len=%d\n", ssids[i].ssid, ssids[i].ssid_len);
++		#endif
++		_rtw_memcpy(ssid[i].Ssid, ssids[i].ssid, ssids[i].ssid_len);
++		ssid[i].SsidLength = ssids[i].ssid_len;	
++	}
++	
++
++	/* parsing channels, n_channels */
++	_rtw_memset(ch, 0, sizeof(struct rtw_ieee80211_channel)*RTW_CHANNEL_SCAN_AMOUNT);
++	for (i=0;i<request->n_channels && i<RTW_CHANNEL_SCAN_AMOUNT;i++) {
++		#ifdef CONFIG_DEBUG_CFG80211
++		DBG_871X(FUNC_ADPT_FMT CHAN_FMT"\n", FUNC_ADPT_ARG(padapter), CHAN_ARG(request->channels[i]));
++		#endif
++		ch[i].hw_value = request->channels[i]->hw_value;
++		ch[i].flags = request->channels[i]->flags;
++	}
++
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++	if (request->n_channels == 1) {
++		for(i=1;i<survey_times_for_one_ch;i++)
++			_rtw_memcpy(&ch[i], &ch[0], sizeof(struct rtw_ieee80211_channel));
++		_status = rtw_sitesurvey_cmd(padapter, ssid, RTW_SSID_SCAN_AMOUNT, ch, survey_times_for_one_ch);
++	} else if (request->n_channels == 2) {
++		_rtw_memcpy(&ch[3], &ch[1], sizeof(struct rtw_ieee80211_channel));
++		for(i=1;i<survey_times;i++) {
++			_rtw_memcpy(&ch[i], &ch[0], sizeof(struct rtw_ieee80211_channel));
++			_rtw_memcpy(&ch[i+3], &ch[3], sizeof(struct rtw_ieee80211_channel));
++		}
++		_status = rtw_sitesurvey_cmd(padapter, ssid, RTW_SSID_SCAN_AMOUNT, ch, survey_times * 2);
++	} else {
++		_status = rtw_sitesurvey_cmd(padapter, ssid, RTW_SSID_SCAN_AMOUNT, NULL, 0);
++	}
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++
++
++	if(_status == _FALSE)
++	{
++		ret = -1;
++	}
++
++check_need_indicate_scan_done:
++	if(need_indicate_scan_done)
++		rtw_cfg80211_surveydone_event_callback(padapter);
++
++exit:
++
++	return ret;
++	
++}
++
++static int cfg80211_rtw_set_wiphy_params(struct wiphy *wiphy, u32 changed)
++{
++#if 0
++	struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
++
++	if (changed & WIPHY_PARAM_RTS_THRESHOLD &&
++	    (iwm->conf.rts_threshold != wiphy->rts_threshold)) {
++		int ret;
++
++		iwm->conf.rts_threshold = wiphy->rts_threshold;
++
++		ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
++					     CFG_RTS_THRESHOLD,
++					     iwm->conf.rts_threshold);
++		if (ret < 0)
++			return ret;
++	}
++
++	if (changed & WIPHY_PARAM_FRAG_THRESHOLD &&
++	    (iwm->conf.frag_threshold != wiphy->frag_threshold)) {
++		int ret;
++
++		iwm->conf.frag_threshold = wiphy->frag_threshold;
++
++		ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_FA_CFG_FIX,
++					     CFG_FRAG_THRESHOLD,
++					     iwm->conf.frag_threshold);
++		if (ret < 0)
++			return ret;
++	}
++#endif
++	DBG_8192C("%s\n", __func__);
++	return 0;
++}
++
++static int cfg80211_rtw_join_ibss(struct wiphy *wiphy, struct net_device *ndev,
++				  struct cfg80211_ibss_params *params)
++{
++#if 0
++	struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
++	struct ieee80211_channel *chan = params->channel;
++
++	if (!test_bit(IWM_STATUS_READY, &iwm->status))
++		return -EIO;
++
++	/* UMAC doesn't support creating or joining an IBSS network
++	 * with specified bssid. */
++	if (params->bssid)
++		return -EOPNOTSUPP;
++
++	iwm->channel = ieee80211_frequency_to_channel(chan->center_freq);
++	iwm->umac_profile->ibss.band = chan->band;
++	iwm->umac_profile->ibss.channel = iwm->channel;
++	iwm->umac_profile->ssid.ssid_len = params->ssid_len;
++	memcpy(iwm->umac_profile->ssid.ssid, params->ssid, params->ssid_len);
++
++	return iwm_send_mlme_profile(iwm);
++#endif	
++	DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev));
++	return 0;
++}
++
++static int cfg80211_rtw_leave_ibss(struct wiphy *wiphy, struct net_device *ndev)
++{
++#if 0
++	struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
++
++	if (iwm->umac_profile_active)
++		return iwm_invalidate_mlme_profile(iwm);
++#endif
++	DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev));
++	return 0;
++}
++
++static int rtw_cfg80211_set_wpa_version(struct security_priv *psecuritypriv, u32 wpa_version)
++{	
++	DBG_8192C("%s, wpa_version=%d\n", __func__, wpa_version);
++	
++	if (!wpa_version) {		
++		psecuritypriv->ndisauthtype = Ndis802_11AuthModeOpen;		
++		return 0;
++	}
++
++
++	if (wpa_version & (NL80211_WPA_VERSION_1 | NL80211_WPA_VERSION_2))
++	{		
++		psecuritypriv->ndisauthtype = Ndis802_11AuthModeWPAPSK;		
++	}
++
++/*
++	if (wpa_version & NL80211_WPA_VERSION_2)
++	{		
++		psecuritypriv->ndisauthtype = Ndis802_11AuthModeWPA2PSK;
++	}
++*/
++
++	return 0;
++
++}
++
++static int rtw_cfg80211_set_auth_type(struct security_priv *psecuritypriv,
++			     enum nl80211_auth_type sme_auth_type)
++{
++	DBG_8192C("%s, nl80211_auth_type=%d\n", __func__, sme_auth_type);
++
++
++	switch (sme_auth_type) {
++	case NL80211_AUTHTYPE_AUTOMATIC:
++
++		psecuritypriv->dot11AuthAlgrthm = dot11AuthAlgrthm_Auto;
++
++		break;
++	case NL80211_AUTHTYPE_OPEN_SYSTEM:
++	
++		psecuritypriv->dot11AuthAlgrthm = dot11AuthAlgrthm_Open;
++
++		if(psecuritypriv->ndisauthtype>Ndis802_11AuthModeWPA)
++			psecuritypriv->dot11AuthAlgrthm = dot11AuthAlgrthm_8021X;
++		
++		break;
++	case NL80211_AUTHTYPE_SHARED_KEY:
++
++		psecuritypriv->dot11AuthAlgrthm = dot11AuthAlgrthm_Shared;
++
++		psecuritypriv->ndisencryptstatus = Ndis802_11Encryption1Enabled;
++
++
++		break;
++	default:		
++		psecuritypriv->dot11AuthAlgrthm = dot11AuthAlgrthm_Open;
++		//return -ENOTSUPP;
++	}
++
++	return 0;
++
++}
++
++static int rtw_cfg80211_set_cipher(struct security_priv *psecuritypriv, u32 cipher, bool ucast)
++{
++	u32 ndisencryptstatus = Ndis802_11EncryptionDisabled;
++
++	u32 *profile_cipher = ucast ? &psecuritypriv->dot11PrivacyAlgrthm :
++		&psecuritypriv->dot118021XGrpPrivacy;
++
++	DBG_8192C("%s, ucast=%d, cipher=0x%x\n", __func__, ucast, cipher);
++
++
++	if (!cipher) {
++		*profile_cipher = _NO_PRIVACY_;
++		psecuritypriv->ndisencryptstatus = ndisencryptstatus;
++		return 0;
++	}
++	
++	switch (cipher) {
++	case IW_AUTH_CIPHER_NONE:
++		*profile_cipher = _NO_PRIVACY_;
++		ndisencryptstatus = Ndis802_11EncryptionDisabled;
++		break;
++	case WLAN_CIPHER_SUITE_WEP40:
++		*profile_cipher = _WEP40_;
++		ndisencryptstatus = Ndis802_11Encryption1Enabled;
++		break;
++	case WLAN_CIPHER_SUITE_WEP104:
++		*profile_cipher = _WEP104_;
++		ndisencryptstatus = Ndis802_11Encryption1Enabled;
++		break;
++	case WLAN_CIPHER_SUITE_TKIP:
++		*profile_cipher = _TKIP_;
++		ndisencryptstatus = Ndis802_11Encryption2Enabled;
++		break;
++	case WLAN_CIPHER_SUITE_CCMP:
++		*profile_cipher = _AES_;
++		ndisencryptstatus = Ndis802_11Encryption3Enabled;
++		break;
++	default:
++		DBG_8192C("Unsupported cipher: 0x%x\n", cipher);
++		return -ENOTSUPP;
++	}
++
++	if(ucast)
++	{
++		psecuritypriv->ndisencryptstatus = ndisencryptstatus;
++		
++		//if(psecuritypriv->dot11PrivacyAlgrthm >= _AES_)
++		//	psecuritypriv->ndisauthtype = Ndis802_11AuthModeWPA2PSK;
++	}	
++
++	return 0;
++}
++
++static int rtw_cfg80211_set_key_mgt(struct security_priv *psecuritypriv, u32 key_mgt)
++{
++	DBG_8192C("%s, key_mgt=0x%x\n", __func__, key_mgt);
++
++	if (key_mgt == WLAN_AKM_SUITE_8021X)
++		//*auth_type = UMAC_AUTH_TYPE_8021X;
++		psecuritypriv->dot11AuthAlgrthm = dot11AuthAlgrthm_8021X;
++	else if (key_mgt == WLAN_AKM_SUITE_PSK) {
++		psecuritypriv->dot11AuthAlgrthm = dot11AuthAlgrthm_8021X;
++	} else {
++		DBG_8192C("Invalid key mgt: 0x%x\n", key_mgt);
++		//return -EINVAL;
++	}
++
++	return 0;
++}
++
++static int rtw_cfg80211_set_wpa_ie(_adapter *padapter, u8 *pie, size_t ielen)
++{
++	u8 *buf=NULL, *pos=NULL;	
++	u32 left; 	
++	int group_cipher = 0, pairwise_cipher = 0;
++	int ret = 0;
++	int wpa_ielen=0;
++	int wpa2_ielen=0;
++	u8 *pwpa, *pwpa2;
++	u8 null_addr[]= {0,0,0,0,0,0};
++
++	if (pie == NULL || !ielen) {
++		/* Treat this as normal case, but need to clear WIFI_UNDER_WPS */
++		_clr_fwstate_(&padapter->mlmepriv, WIFI_UNDER_WPS);
++		goto exit;
++	}
++
++	if (ielen > MAX_WPA_IE_LEN+MAX_WPS_IE_LEN+MAX_P2P_IE_LEN) {
++		ret = -EINVAL;
++		goto exit;
++	}
++
++	buf = rtw_zmalloc(ielen);
++	if (buf == NULL){
++		ret =  -ENOMEM;
++		goto exit;
++	}
++
++	_rtw_memcpy(buf, pie , ielen);
++
++	//dump
++	{
++		int i;
++		DBG_8192C("set wpa_ie(length:%zu):\n", ielen);
++		for(i=0;i<ielen;i=i+8)
++			DBG_8192C("0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x \n",buf[i],buf[i+1],buf[i+2],buf[i+3],buf[i+4],buf[i+5],buf[i+6],buf[i+7]);
++	}
++
++	pos = buf;
++	if(ielen < RSN_HEADER_LEN){
++		RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_err_,("Ie len too short %d\n", ielen));
++		ret  = -1;
++		goto exit;
++	}
++
++	pwpa = rtw_get_wpa_ie(buf, &wpa_ielen, ielen);
++	if(pwpa && wpa_ielen>0)
++	{
++		if(rtw_parse_wpa_ie(pwpa, wpa_ielen+2, &group_cipher, &pairwise_cipher) == _SUCCESS)
++		{
++			padapter->securitypriv.dot11AuthAlgrthm= dot11AuthAlgrthm_8021X;
++			padapter->securitypriv.ndisauthtype=Ndis802_11AuthModeWPAPSK;
++			_rtw_memcpy(padapter->securitypriv.supplicant_ie, &pwpa[0], wpa_ielen+2);
++			
++			DBG_8192C("got wpa_ie, wpa_ielen:%u\n", wpa_ielen);
++		}
++	}
++
++	pwpa2 = rtw_get_wpa2_ie(buf, &wpa2_ielen, ielen);
++	if(pwpa2 && wpa2_ielen>0)
++	{
++		if(rtw_parse_wpa2_ie(pwpa2, wpa2_ielen+2, &group_cipher, &pairwise_cipher) == _SUCCESS)
++		{
++			padapter->securitypriv.dot11AuthAlgrthm= dot11AuthAlgrthm_8021X;
++			padapter->securitypriv.ndisauthtype=Ndis802_11AuthModeWPA2PSK;	
++			_rtw_memcpy(padapter->securitypriv.supplicant_ie, &pwpa2[0], wpa2_ielen+2);
++
++			DBG_8192C("got wpa2_ie, wpa2_ielen:%u\n", wpa2_ielen);
++		}
++	}
++
++	if (group_cipher == 0)
++	{
++		group_cipher = WPA_CIPHER_NONE;
++	}
++	if (pairwise_cipher == 0)
++	{
++		pairwise_cipher = WPA_CIPHER_NONE;
++	}
++	
++	switch(group_cipher)
++	{
++		case WPA_CIPHER_NONE:
++			padapter->securitypriv.dot118021XGrpPrivacy=_NO_PRIVACY_;
++			padapter->securitypriv.ndisencryptstatus=Ndis802_11EncryptionDisabled;
++			break;
++		case WPA_CIPHER_WEP40:
++			padapter->securitypriv.dot118021XGrpPrivacy=_WEP40_;
++			padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled;
++			break;
++		case WPA_CIPHER_TKIP:
++			padapter->securitypriv.dot118021XGrpPrivacy=_TKIP_;
++			padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption2Enabled;
++			break;
++		case WPA_CIPHER_CCMP:
++			padapter->securitypriv.dot118021XGrpPrivacy=_AES_;
++			padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption3Enabled;
++			break;
++		case WPA_CIPHER_WEP104:	
++			padapter->securitypriv.dot118021XGrpPrivacy=_WEP104_;
++			padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled;
++			break;
++	}
++
++	switch(pairwise_cipher)
++	{
++		case WPA_CIPHER_NONE:
++			padapter->securitypriv.dot11PrivacyAlgrthm=_NO_PRIVACY_;
++			padapter->securitypriv.ndisencryptstatus=Ndis802_11EncryptionDisabled;
++			break;
++		case WPA_CIPHER_WEP40:
++			padapter->securitypriv.dot11PrivacyAlgrthm=_WEP40_;
++			padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled;
++			break;
++		case WPA_CIPHER_TKIP:
++			padapter->securitypriv.dot11PrivacyAlgrthm=_TKIP_;
++			padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption2Enabled;
++			break;
++		case WPA_CIPHER_CCMP:
++			padapter->securitypriv.dot11PrivacyAlgrthm=_AES_;
++			padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption3Enabled;
++			break;
++		case WPA_CIPHER_WEP104:	
++			padapter->securitypriv.dot11PrivacyAlgrthm=_WEP104_;
++			padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled;
++			break;
++	}
++	
++	{/* handle wps_ie */
++		uint wps_ielen;	
++		u8 *wps_ie;
++
++		wps_ie = rtw_get_wps_ie(buf, ielen, NULL, &wps_ielen);
++		if (wps_ie && wps_ielen > 0) {
++			DBG_8192C("got wps_ie, wps_ielen:%u\n", wps_ielen);
++			padapter->securitypriv.wps_ie_len = wps_ielen<MAX_WPS_IE_LEN?wps_ielen:MAX_WPS_IE_LEN;
++			_rtw_memcpy(padapter->securitypriv.wps_ie, wps_ie, padapter->securitypriv.wps_ie_len);
++			set_fwstate(&padapter->mlmepriv, WIFI_UNDER_WPS);
++		} else {
++			_clr_fwstate_(&padapter->mlmepriv, WIFI_UNDER_WPS);
++		}
++	}
++
++	#ifdef CONFIG_P2P
++	{//check p2p_ie for assoc req; 
++		uint p2p_ielen=0;
++		u8 *p2p_ie;
++		struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++
++		if((p2p_ie=rtw_get_p2p_ie(buf, ielen, NULL, &p2p_ielen)))
++		{
++			#ifdef CONFIG_DEBUG_CFG80211
++			DBG_8192C("%s p2p_assoc_req_ielen=%d\n", __FUNCTION__, p2p_ielen);
++			#endif
++
++			if(pmlmepriv->p2p_assoc_req_ie)
++			{
++				u32 free_len = pmlmepriv->p2p_assoc_req_ie_len;
++				pmlmepriv->p2p_assoc_req_ie_len = 0;
++				rtw_mfree(pmlmepriv->p2p_assoc_req_ie, free_len);
++				pmlmepriv->p2p_assoc_req_ie = NULL;
++			}
++
++			pmlmepriv->p2p_assoc_req_ie = rtw_malloc(p2p_ielen);
++			if ( pmlmepriv->p2p_assoc_req_ie == NULL) {
++				DBG_8192C("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__);
++				goto exit;
++			}
++			_rtw_memcpy(pmlmepriv->p2p_assoc_req_ie, p2p_ie, p2p_ielen);
++			pmlmepriv->p2p_assoc_req_ie_len = p2p_ielen;
++		}
++	}
++	#endif //CONFIG_P2P
++
++	#ifdef CONFIG_WFD
++	{//check wfd_ie for assoc req; 
++		uint wfd_ielen=0;
++		u8 *wfd_ie;
++		struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++
++		if(rtw_get_wfd_ie(buf, ielen, NULL, &wfd_ielen))
++		{
++			#ifdef CONFIG_DEBUG_CFG80211
++			DBG_8192C("%s wfd_assoc_req_ielen=%d\n", __FUNCTION__, wfd_ielen);
++			#endif
++
++			if(pmlmepriv->wfd_assoc_req_ie)
++			{
++				u32 free_len = pmlmepriv->wfd_assoc_req_ie_len;
++				pmlmepriv->wfd_assoc_req_ie_len = 0;
++				rtw_mfree(pmlmepriv->wfd_assoc_req_ie, free_len);
++				pmlmepriv->wfd_assoc_req_ie = NULL;
++			}
++
++			pmlmepriv->wfd_assoc_req_ie = rtw_malloc(wfd_ielen);
++			if ( pmlmepriv->wfd_assoc_req_ie == NULL) {
++				DBG_8192C("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__);
++				goto exit;
++			}
++			rtw_get_wfd_ie(buf, ielen, pmlmepriv->wfd_assoc_req_ie, &pmlmepriv->wfd_assoc_req_ie_len);			
++		}
++	}
++	#endif //CONFIG_WFD
++
++	//TKIP and AES disallow multicast packets until installing group key
++	if(padapter->securitypriv.dot11PrivacyAlgrthm == _TKIP_
++		|| padapter->securitypriv.dot11PrivacyAlgrthm == _TKIP_WTMIC_
++		|| padapter->securitypriv.dot11PrivacyAlgrthm == _AES_)
++		//WPS open need to enable multicast
++		//|| check_fwstate(&padapter->mlmepriv, WIFI_UNDER_WPS) == _TRUE)
++		rtw_hal_set_hwreg(padapter, HW_VAR_OFF_RCR_AM, null_addr);
++
++	RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_info_,
++		("rtw_set_wpa_ie: pairwise_cipher=0x%08x padapter->securitypriv.ndisencryptstatus=%d padapter->securitypriv.ndisauthtype=%d\n",
++		pairwise_cipher, padapter->securitypriv.ndisencryptstatus, padapter->securitypriv.ndisauthtype));
++
++exit:
++	if (buf)
++		rtw_mfree(buf, ielen);
++	if (ret)
++		_clr_fwstate_(&padapter->mlmepriv, WIFI_UNDER_WPS);
++	return ret;
++}
++
++static int cfg80211_rtw_connect(struct wiphy *wiphy, struct net_device *ndev,
++				 struct cfg80211_connect_params *sme)
++{
++	int ret=0;
++	_irqL irqL;	
++	_list *phead;	
++	struct wlan_network *pnetwork = NULL;
++	NDIS_802_11_AUTHENTICATION_MODE authmode;	
++	NDIS_802_11_SSID ndis_ssid;	
++	u8 *dst_ssid, *src_ssid;
++	u8 *dst_bssid, *src_bssid;
++	//u8 matched_by_bssid=_FALSE;
++	//u8 matched_by_ssid=_FALSE;
++	u8 matched=_FALSE;
++	_adapter *padapter = wiphy_to_adapter(wiphy);
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;	
++	struct security_priv *psecuritypriv = &padapter->securitypriv;
++	_queue *queue = &pmlmepriv->scanned_queue;	
++	
++	DBG_871X("=>"FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev));
++	DBG_871X("privacy=%d, key=%p, key_len=%d, key_idx=%d\n",
++		sme->privacy, sme->key, sme->key_len, sme->key_idx);
++
++
++	if(wdev_to_priv(padapter->rtw_wdev)->block == _TRUE)
++	{
++		ret = -EBUSY;
++		DBG_871X("%s wdev_priv.block is set\n", __FUNCTION__);
++		goto exit;
++	}
++
++#ifdef CONFIG_PLATFORM_MSTAR
++	printk("MStar Android!\n");
++	if((wdev_to_priv(padapter->rtw_wdev))->bandroid_scan == _FALSE)
++	{
++#ifdef CONFIG_P2P
++		struct wifidirect_info *pwdinfo= &(padapter->wdinfo);	
++		if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++#endif //CONFIG_P2P
++		{
++			ret = -EBUSY;
++			printk("Android hasn't attached yet!\n");
++			goto exit;
++		}	
++	}
++#endif
++
++	if(_FAIL == rtw_pwr_wakeup(padapter)) {
++		ret= -EPERM;
++		goto exit;
++	}
++
++	if(check_fwstate(pmlmepriv, WIFI_AP_STATE)) {
++		ret = -EPERM;
++		goto exit;
++	}
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if (check_buddy_fwstate(padapter, _FW_UNDER_LINKING) == _TRUE) {
++		DBG_8192C("%s, but buddy_intf is under linking\n", __FUNCTION__);
++		ret = -EINVAL;
++		goto exit;
++	}
++	if (check_buddy_fwstate(padapter, _FW_UNDER_SURVEY) == _TRUE) {
++		rtw_scan_abort(padapter->pbuddy_adapter);
++	}
++#endif
++
++	if (!sme->ssid || !sme->ssid_len)
++	{
++		ret = -EINVAL;
++		goto exit;
++	}
++
++	if (sme->ssid_len > IW_ESSID_MAX_SIZE){
++
++		ret= -E2BIG;
++		goto exit;
++	}
++	
++	_rtw_memset(&ndis_ssid, 0, sizeof(NDIS_802_11_SSID));			
++	ndis_ssid.SsidLength = sme->ssid_len;
++	_rtw_memcpy(ndis_ssid.Ssid, sme->ssid, sme->ssid_len);
++
++	DBG_8192C("ssid=%s, len=%zu\n", ndis_ssid.Ssid, sme->ssid_len);
++	
++
++	if (sme->bssid)
++		DBG_8192C("bssid="MAC_FMT"\n", MAC_ARG(sme->bssid));
++
++
++	if (check_fwstate(pmlmepriv, _FW_UNDER_LINKING) == _TRUE) {
++		ret = -EBUSY;
++		DBG_8192C("%s, fw_state=0x%x, goto exit\n", __FUNCTION__, pmlmepriv->fw_state);
++		goto exit;		
++	}
++	if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) {
++		rtw_scan_abort(padapter);
++	}
++
++	psecuritypriv->ndisencryptstatus = Ndis802_11EncryptionDisabled;
++	psecuritypriv->dot11PrivacyAlgrthm = _NO_PRIVACY_;
++	psecuritypriv->dot118021XGrpPrivacy = _NO_PRIVACY_;
++	psecuritypriv->dot11AuthAlgrthm = dot11AuthAlgrthm_Open; //open system
++	psecuritypriv->ndisauthtype = Ndis802_11AuthModeOpen;
++
++
++	ret = rtw_cfg80211_set_wpa_version(psecuritypriv, sme->crypto.wpa_versions);
++	if (ret < 0)
++		goto exit;
++
++	ret = rtw_cfg80211_set_auth_type(psecuritypriv, sme->auth_type);
++	if (ret < 0)
++		goto exit;
++
++	DBG_8192C("%s, ie_len=%zu\n", __func__, sme->ie_len);
++			
++	ret = rtw_cfg80211_set_wpa_ie(padapter, sme->ie, sme->ie_len);
++	if (ret < 0)
++		goto exit;
++
++	if (sme->crypto.n_ciphers_pairwise) {		
++		ret = rtw_cfg80211_set_cipher(psecuritypriv, sme->crypto.ciphers_pairwise[0], _TRUE);
++		if (ret < 0)
++			goto exit;
++	}
++
++	//For WEP Shared auth
++	if((psecuritypriv->dot11AuthAlgrthm == dot11AuthAlgrthm_Shared
++		|| psecuritypriv->dot11AuthAlgrthm == dot11AuthAlgrthm_Auto) && sme->key
++	)
++	{
++		u32 wep_key_idx, wep_key_len,wep_total_len;
++		NDIS_802_11_WEP	 *pwep = NULL;
++		DBG_871X("%s(): Shared/Auto WEP\n",__FUNCTION__);
++
++		wep_key_idx = sme->key_idx;
++		wep_key_len = sme->key_len;
++
++		if (sme->key_idx > WEP_KEYS) {
++			ret = -EINVAL;
++			goto exit;
++		}
++
++		if (wep_key_len > 0) 
++		{
++		 	wep_key_len = wep_key_len <= 5 ? 5 : 13;
++			wep_total_len = wep_key_len + FIELD_OFFSET(NDIS_802_11_WEP, KeyMaterial);
++		 	pwep =(NDIS_802_11_WEP	 *) rtw_malloc(wep_total_len);
++			if(pwep == NULL){
++				DBG_871X(" wpa_set_encryption: pwep allocate fail !!!\n");
++				ret = -ENOMEM;
++				goto exit;
++			}
++
++		 	_rtw_memset(pwep, 0, wep_total_len);
++
++		 	pwep->KeyLength = wep_key_len;
++			pwep->Length = wep_total_len;
++
++			if(wep_key_len==13)
++			{
++				padapter->securitypriv.dot11PrivacyAlgrthm=_WEP104_;
++				padapter->securitypriv.dot118021XGrpPrivacy=_WEP104_;
++			}
++		}
++		else {		
++			ret = -EINVAL;
++			goto exit;
++		}
++
++		pwep->KeyIndex = wep_key_idx;
++		pwep->KeyIndex |= 0x80000000;
++
++		_rtw_memcpy(pwep->KeyMaterial,  (void *)sme->key, pwep->KeyLength);
++
++		if(rtw_set_802_11_add_wep(padapter, pwep) == (u8)_FAIL)
++		{
++			ret = -EOPNOTSUPP ;
++		}
++
++		if (pwep) {
++			rtw_mfree((u8 *)pwep,wep_total_len);		
++		}
++
++		if(ret < 0)
++			goto exit;
++	}
++
++	ret = rtw_cfg80211_set_cipher(psecuritypriv, sme->crypto.cipher_group, _FALSE);
++	if (ret < 0)
++		return ret;
++
++	if (sme->crypto.n_akm_suites) {
++		ret = rtw_cfg80211_set_key_mgt(psecuritypriv, sme->crypto.akm_suites[0]);
++		if (ret < 0)
++			goto exit;
++	}
++
++	authmode = psecuritypriv->ndisauthtype;
++	rtw_set_802_11_authentication_mode(padapter, authmode);
++
++	//rtw_set_802_11_encryption_mode(padapter, padapter->securitypriv.ndisencryptstatus);
++
++	if (rtw_set_802_11_connect(padapter, sme->bssid, &ndis_ssid) == _FALSE) {
++		ret = -1;
++		goto exit;
++	}
++
++	DBG_8192C("set ssid:dot11AuthAlgrthm=%d, dot11PrivacyAlgrthm=%d, dot118021XGrpPrivacy=%d\n", psecuritypriv->dot11AuthAlgrthm, psecuritypriv->dot11PrivacyAlgrthm, psecuritypriv->dot118021XGrpPrivacy);
++	
++exit:
++
++	DBG_8192C("<=%s, ret %d\n",__FUNCTION__, ret);
++	
++	return ret;
++}
++
++static int cfg80211_rtw_disconnect(struct wiphy *wiphy, struct net_device *ndev,
++				   u16 reason_code)
++{
++	_adapter *padapter = wiphy_to_adapter(wiphy);
++
++	DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev));
++
++	rtw_set_roaming(padapter, 0);
++
++	if(check_fwstate(&padapter->mlmepriv, _FW_LINKED)) 
++	{
++		rtw_scan_abort(padapter);
++		LeaveAllPowerSaveMode(padapter);
++		rtw_disassoc_cmd(padapter, 500, _FALSE);
++		
++		DBG_871X("%s...call rtw_indicate_disconnect\n", __FUNCTION__);
++		
++		padapter->mlmepriv.not_indic_disco = _TRUE;
++		rtw_indicate_disconnect(padapter);
++		padapter->mlmepriv.not_indic_disco = _FALSE;
++		
++		rtw_free_assoc_resources(padapter, 1);
++	}
++	
++	return 0;
++}
++
++static int cfg80211_rtw_set_txpower(struct wiphy *wiphy,
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,8,0))
++	struct wireless_dev *wdev,
++#endif
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36)) || defined(COMPAT_KERNEL_RELEASE)
++	enum nl80211_tx_power_setting type, int mbm)
++#else
++	enum tx_power_setting type, int dbm)
++#endif
++{
++#if 0
++	struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
++	int ret;
++
++	switch (type) {
++	case NL80211_TX_POWER_AUTOMATIC:
++		return 0;
++	case NL80211_TX_POWER_FIXED:
++		if (mbm < 0 || (mbm % 100))
++			return -EOPNOTSUPP;
++
++		if (!test_bit(IWM_STATUS_READY, &iwm->status))
++			return 0;
++
++		ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
++					      CFG_TX_PWR_LIMIT_USR,
++					      MBM_TO_DBM(mbm) * 2);
++		if (ret < 0)
++			return ret;
++
++		return iwm_tx_power_trigger(iwm);
++	default:
++		IWM_ERR(iwm, "Unsupported power type: %d\n", type);
++		return -EOPNOTSUPP;
++	}
++#endif
++	DBG_8192C("%s\n", __func__);
++	return 0;
++}
++
++static int cfg80211_rtw_get_txpower(struct wiphy *wiphy,
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,8,0))
++	struct wireless_dev *wdev,
++#endif
++	int *dbm)
++{
++	//_adapter *padapter = wiphy_to_adapter(wiphy);
++
++	DBG_8192C("%s\n", __func__);
++
++	*dbm = (12);
++	
++	return 0;
++}
++
++inline bool rtw_cfg80211_pwr_mgmt(_adapter *adapter)
++{
++	struct rtw_wdev_priv *rtw_wdev_priv = wdev_to_priv(adapter->rtw_wdev);
++	return rtw_wdev_priv->power_mgmt;
++}
++
++static int cfg80211_rtw_set_power_mgmt(struct wiphy *wiphy,
++				       struct net_device *ndev,
++				       bool enabled, int timeout)
++{
++	_adapter *padapter = wiphy_to_adapter(wiphy);
++	struct rtw_wdev_priv *rtw_wdev_priv = wdev_to_priv(padapter->rtw_wdev);
++	
++	DBG_871X(FUNC_NDEV_FMT" enabled:%u, timeout:%d\n", FUNC_NDEV_ARG(ndev),
++		enabled, timeout);
++
++	rtw_wdev_priv->power_mgmt = enabled;
++
++	#ifdef CONFIG_LPS
++	if (!enabled)
++		LPS_Leave(padapter);
++	#endif
++
++	return 0;
++}
++
++static int cfg80211_rtw_set_pmksa(struct wiphy *wiphy,
++				  struct net_device *netdev,
++				  struct cfg80211_pmksa *pmksa)
++{
++	u8	index,blInserted = _FALSE;
++	_adapter	*padapter = wiphy_to_adapter(wiphy);
++	struct security_priv	*psecuritypriv = &padapter->securitypriv;
++	u8	strZeroMacAddress[ ETH_ALEN ] = { 0x00 };
++
++	DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(netdev));
++
++	if ( _rtw_memcmp( pmksa->bssid, strZeroMacAddress, ETH_ALEN ) == _TRUE )
++	{
++		return -EINVAL;
++	}
++
++	blInserted = _FALSE;
++	
++	//overwrite PMKID
++	for(index=0 ; index<NUM_PMKID_CACHE; index++)
++	{
++		if( _rtw_memcmp( psecuritypriv->PMKIDList[index].Bssid, pmksa->bssid, ETH_ALEN) ==_TRUE )
++		{ // BSSID is matched, the same AP => rewrite with new PMKID.
++			DBG_871X(FUNC_NDEV_FMT" BSSID exists in the PMKList.\n", FUNC_NDEV_ARG(netdev));
++
++			_rtw_memcpy( psecuritypriv->PMKIDList[index].PMKID, pmksa->pmkid, WLAN_PMKID_LEN);
++			psecuritypriv->PMKIDList[index].bUsed = _TRUE;
++			psecuritypriv->PMKIDIndex = index+1;
++			blInserted = _TRUE;
++			break;
++		}	
++	}
++
++	if(!blInserted)
++	{
++		// Find a new entry
++		DBG_871X(FUNC_NDEV_FMT" Use the new entry index = %d for this PMKID.\n",
++			FUNC_NDEV_ARG(netdev), psecuritypriv->PMKIDIndex );
++
++		_rtw_memcpy(psecuritypriv->PMKIDList[psecuritypriv->PMKIDIndex].Bssid, pmksa->bssid, ETH_ALEN);
++		_rtw_memcpy(psecuritypriv->PMKIDList[psecuritypriv->PMKIDIndex].PMKID, pmksa->pmkid, WLAN_PMKID_LEN);
++
++		psecuritypriv->PMKIDList[psecuritypriv->PMKIDIndex].bUsed = _TRUE;
++		psecuritypriv->PMKIDIndex++ ;
++		if(psecuritypriv->PMKIDIndex==16)
++		{
++			psecuritypriv->PMKIDIndex =0;
++		} 
++	} 
++
++	return 0;
++}
++
++static int cfg80211_rtw_del_pmksa(struct wiphy *wiphy,
++				  struct net_device *netdev,
++				  struct cfg80211_pmksa *pmksa)
++{
++	u8	index, bMatched = _FALSE;
++	_adapter	*padapter = wiphy_to_adapter(wiphy);
++	struct security_priv	*psecuritypriv = &padapter->securitypriv;
++
++	DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(netdev));
++
++	for(index=0 ; index<NUM_PMKID_CACHE; index++)
++	{
++		if( _rtw_memcmp( psecuritypriv->PMKIDList[index].Bssid, pmksa->bssid, ETH_ALEN) ==_TRUE )
++		{ // BSSID is matched, the same AP => Remove this PMKID information and reset it. 
++			_rtw_memset( psecuritypriv->PMKIDList[index].Bssid, 0x00, ETH_ALEN );
++			_rtw_memset( psecuritypriv->PMKIDList[index].PMKID, 0x00, WLAN_PMKID_LEN );
++			psecuritypriv->PMKIDList[index].bUsed = _FALSE;
++			bMatched = _TRUE;
++			break;
++		}	
++	}
++
++	if(_FALSE == bMatched)
++	{
++		DBG_871X(FUNC_NDEV_FMT" do not have matched BSSID\n"
++			, FUNC_NDEV_ARG(netdev));
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++static int cfg80211_rtw_flush_pmksa(struct wiphy *wiphy,
++				    struct net_device *netdev)
++{
++	_adapter	*padapter = wiphy_to_adapter(wiphy);
++	struct security_priv	*psecuritypriv = &padapter->securitypriv;
++
++	DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(netdev));
++
++	_rtw_memset( &psecuritypriv->PMKIDList[ 0 ], 0x00, sizeof( RT_PMKID_LIST ) * NUM_PMKID_CACHE );
++	psecuritypriv->PMKIDIndex = 0;
++
++	return 0;
++}
++
++#ifdef CONFIG_AP_MODE
++void rtw_cfg80211_indicate_sta_assoc(_adapter *padapter, u8 *pmgmt_frame, uint frame_len)
++{
++	s32 freq;
++	int channel;
++	struct wireless_dev *pwdev = padapter->rtw_wdev;
++	struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv);	
++	struct net_device *ndev = padapter->pnetdev;
++
++	DBG_871X(FUNC_ADPT_FMT"\n", FUNC_ADPT_ARG(padapter));
++
++#if defined(RTW_USE_CFG80211_STA_EVENT) || defined(COMPAT_KERNEL_RELEASE)
++	{
++		struct station_info sinfo;
++		u8 ie_offset;
++		if (GetFrameSubType(pmgmt_frame) == WIFI_ASSOCREQ)
++			ie_offset = _ASOCREQ_IE_OFFSET_;
++		else // WIFI_REASSOCREQ
++			ie_offset = _REASOCREQ_IE_OFFSET_;
++	
++		sinfo.filled = 0;
++		sinfo.filled = STATION_INFO_ASSOC_REQ_IES;
++		sinfo.assoc_req_ies = pmgmt_frame + WLAN_HDR_A3_LEN + ie_offset;
++		sinfo.assoc_req_ies_len = frame_len - WLAN_HDR_A3_LEN - ie_offset;
++		cfg80211_new_sta(ndev, GetAddr2Ptr(pmgmt_frame), &sinfo, GFP_ATOMIC);
++	}
++#else /* defined(RTW_USE_CFG80211_STA_EVENT) */
++	channel = pmlmeext->cur_channel;
++	if (channel <= RTW_CH_MAX_2G_CHANNEL)
++		freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ);
++	else
++		freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_5GHZ);
++
++	#ifdef COMPAT_KERNEL_RELEASE
++	rtw_cfg80211_rx_mgmt(padapter, freq, 0, pmgmt_frame, frame_len, GFP_ATOMIC);
++	#elif (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) && !defined(CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER)
++	rtw_cfg80211_rx_mgmt(padapter, freq, 0, pmgmt_frame, frame_len, GFP_ATOMIC);
++	#else //COMPAT_KERNEL_RELEASE
++	{
++		//to avoid WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION)  when calling cfg80211_send_rx_assoc()
++		#ifndef CONFIG_PLATFORM_MSTAR
++		pwdev->iftype = NL80211_IFTYPE_STATION;
++		#endif //CONFIG_PLATFORM_MSTAR
++		DBG_8192C("iftype=%d before call cfg80211_send_rx_assoc()\n", pwdev->iftype);
++		rtw_cfg80211_send_rx_assoc(padapter, NULL, pmgmt_frame, frame_len);
++		DBG_8192C("iftype=%d after call cfg80211_send_rx_assoc()\n", pwdev->iftype);
++		pwdev->iftype = NL80211_IFTYPE_AP;
++		//cfg80211_rx_action(padapter->pnetdev, freq, pmgmt_frame, frame_len, GFP_ATOMIC);
++	}
++	#endif //COMPAT_KERNEL_RELEASE
++#endif /* defined(RTW_USE_CFG80211_STA_EVENT) */
++
++}
++
++void rtw_cfg80211_indicate_sta_disassoc(_adapter *padapter, unsigned char *da, unsigned short reason)
++{
++	s32 freq;
++	int channel;
++	u8 *pmgmt_frame;
++	uint frame_len;
++	struct rtw_ieee80211_hdr *pwlanhdr;
++	unsigned short *fctrl;	
++	u8 mgmt_buf[128] = {0};
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct net_device *ndev = padapter->pnetdev;
++	
++	DBG_871X(FUNC_ADPT_FMT"\n", FUNC_ADPT_ARG(padapter));
++
++#if defined(RTW_USE_CFG80211_STA_EVENT) || defined(COMPAT_KERNEL_RELEASE)
++	cfg80211_del_sta(ndev, da, GFP_ATOMIC);
++#else /* defined(RTW_USE_CFG80211_STA_EVENT) */
++	channel = pmlmeext->cur_channel;
++	if (channel <= RTW_CH_MAX_2G_CHANNEL)
++		freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ);
++	else
++		freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_5GHZ);
++
++	pmgmt_frame = mgmt_buf;	
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pmgmt_frame;
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++
++	//_rtw_memcpy(pwlanhdr->addr1, da, ETH_ALEN);
++	//_rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr1, myid(&(padapter->eeprompriv)), ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr2, da, ETH_ALEN);	
++	_rtw_memcpy(pwlanhdr->addr3, get_my_bssid(&(pmlmeinfo->network)), ETH_ALEN);
++
++	SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq);
++	pmlmeext->mgnt_seq++;
++	SetFrameSubType(pmgmt_frame, WIFI_DEAUTH);
++
++	pmgmt_frame += sizeof(struct rtw_ieee80211_hdr_3addr);
++	frame_len = sizeof(struct rtw_ieee80211_hdr_3addr);
++
++	reason = cpu_to_le16(reason);
++	pmgmt_frame = rtw_set_fixed_ie(pmgmt_frame, _RSON_CODE_ , (unsigned char *)&reason, &frame_len);
++
++	#ifdef COMPAT_KERNEL_RELEASE
++	rtw_cfg80211_rx_mgmt(padapter, freq, 0, mgmt_buf, frame_len, GFP_ATOMIC);
++	#elif (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) && !defined(CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER)
++	rtw_cfg80211_rx_mgmt(padapter, freq, 0, mgmt_buf, frame_len, GFP_ATOMIC);
++	#else //COMPAT_KERNEL_RELEASE
++	cfg80211_send_disassoc(padapter->pnetdev, mgmt_buf, frame_len);	
++	//cfg80211_rx_action(padapter->pnetdev, freq, mgmt_buf, frame_len, GFP_ATOMIC);
++	#endif //COMPAT_KERNEL_RELEASE
++#endif /* defined(RTW_USE_CFG80211_STA_EVENT) */
++}
++
++static int rtw_cfg80211_monitor_if_open(struct net_device *ndev)
++{
++	int ret = 0;
++
++	DBG_8192C("%s\n", __func__);
++	
++	return ret;
++}
++
++static int rtw_cfg80211_monitor_if_close(struct net_device *ndev)
++{
++	int ret = 0;
++
++	DBG_8192C("%s\n", __func__);
++	
++	return ret;
++}
++
++static int rtw_cfg80211_monitor_if_xmit_entry(struct sk_buff *skb, struct net_device *ndev)
++{	
++	int ret = 0;
++	int rtap_len;
++	int qos_len = 0;
++	int dot11_hdr_len = 24;
++	int snap_len = 6;
++	unsigned char *pdata;
++	u16 frame_ctl;
++	unsigned char src_mac_addr[6];
++	unsigned char dst_mac_addr[6];
++	struct ieee80211_hdr *dot11_hdr;
++	struct ieee80211_radiotap_header *rtap_hdr;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(ndev);
++	
++	DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev));
++
++	if (skb)
++		rtw_mstat_update(MSTAT_TYPE_SKB, MSTAT_ALLOC_SUCCESS, skb->truesize);
++
++	if (unlikely(skb->len < sizeof(struct ieee80211_radiotap_header)))
++		goto fail;
++
++	rtap_hdr = (struct ieee80211_radiotap_header *)skb->data;
++	if (unlikely(rtap_hdr->it_version))
++		goto fail;
++
++	rtap_len = ieee80211_get_radiotap_len(skb->data);
++	if (unlikely(skb->len < rtap_len))
++		goto fail;
++
++	if(rtap_len != 14)
++	{
++		DBG_8192C("radiotap len (should be 14): %d\n", rtap_len);
++		goto fail;
++	}	
++
++	/* Skip the ratio tap header */
++	skb_pull(skb, rtap_len);
++
++	dot11_hdr = (struct ieee80211_hdr *)skb->data;
++	frame_ctl = le16_to_cpu(dot11_hdr->frame_control);
++	/* Check if the QoS bit is set */
++	if ((frame_ctl & RTW_IEEE80211_FCTL_FTYPE) == RTW_IEEE80211_FTYPE_DATA) {
++		/* Check if this ia a Wireless Distribution System (WDS) frame
++		 * which has 4 MAC addresses
++		 */
++		if (dot11_hdr->frame_control & 0x0080)
++			qos_len = 2;
++		if ((dot11_hdr->frame_control & 0x0300) == 0x0300)
++			dot11_hdr_len += 6;
++
++		memcpy(dst_mac_addr, dot11_hdr->addr1, sizeof(dst_mac_addr));
++		memcpy(src_mac_addr, dot11_hdr->addr2, sizeof(src_mac_addr));
++
++		/* Skip the 802.11 header, QoS (if any) and SNAP, but leave spaces for
++		 * for two MAC addresses
++		 */
++		skb_pull(skb, dot11_hdr_len + qos_len + snap_len - sizeof(src_mac_addr) * 2);
++		pdata = (unsigned char*)skb->data;
++		memcpy(pdata, dst_mac_addr, sizeof(dst_mac_addr));
++		memcpy(pdata + sizeof(dst_mac_addr), src_mac_addr, sizeof(src_mac_addr));
++
++		DBG_8192C("should be eapol packet\n");
++
++		/* Use the real net device to transmit the packet */		
++		ret = _rtw_xmit_entry(skb, padapter->pnetdev);
++
++		return ret;
++
++	}
++	else if ((frame_ctl & (RTW_IEEE80211_FCTL_FTYPE|RTW_IEEE80211_FCTL_STYPE))
++		== (RTW_IEEE80211_FTYPE_MGMT|RTW_IEEE80211_STYPE_ACTION)
++	) 
++	{
++		//only for action frames
++		struct xmit_frame		*pmgntframe;
++		struct pkt_attrib	*pattrib;
++		unsigned char	*pframe;	
++		//u8 category, action, OUI_Subtype, dialogToken=0;
++		//unsigned char	*frame_body;
++		struct rtw_ieee80211_hdr *pwlanhdr;	
++		struct xmit_priv	*pxmitpriv = &(padapter->xmitpriv);
++		struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++		u8 *buf = skb->data;
++		u32 len = skb->len;
++		u8 category, action;
++		int type = -1;
++
++		if (rtw_action_frame_parse(buf, len, &category, &action) == _FALSE) {
++			DBG_8192C(FUNC_NDEV_FMT" frame_control:0x%x\n", FUNC_NDEV_ARG(ndev),
++				le16_to_cpu(((struct rtw_ieee80211_hdr_3addr *)buf)->frame_ctl));
++			goto fail;
++		}
++		
++		DBG_8192C("RTW_Tx:da="MAC_FMT" via "FUNC_NDEV_FMT"\n",
++			MAC_ARG(GetAddr1Ptr(buf)), FUNC_NDEV_ARG(ndev));
++		#ifdef CONFIG_P2P
++		if((type = rtw_p2p_check_frames(padapter, buf, len, _TRUE)) >= 0)
++			goto dump;
++		#endif
++		if (category == RTW_WLAN_CATEGORY_PUBLIC)
++			DBG_871X("RTW_Tx:%s\n", action_public_str(action));
++		else
++			DBG_871X("RTW_Tx:category(%u), action(%u)\n", category, action);
++
++dump:
++		//starting alloc mgmt frame to dump it
++		if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++		{			
++			goto fail;
++		}
++
++		//update attribute
++		pattrib = &pmgntframe->attrib;
++		update_mgntframe_attrib(padapter, pattrib);
++		pattrib->retry_ctrl = _FALSE;
++
++		_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++
++		pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++
++		_rtw_memcpy(pframe, (void*)buf, len);
++		#ifdef CONFIG_WFD
++		if (type >= 0)
++		{
++			struct wifi_display_info		*pwfd_info;
++			
++			pwfd_info = padapter->wdinfo.wfd_info;
++			
++			if ( _TRUE == pwfd_info->wfd_enable )
++			{
++				rtw_append_wfd_ie( padapter, pframe, &len );
++			}
++		}
++		#endif // CONFIG_WFD
++		pattrib->pktlen = len;	
++	
++		pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++		//update seq number
++		pmlmeext->mgnt_seq = GetSequence(pwlanhdr);
++		pattrib->seqnum = pmlmeext->mgnt_seq;
++		pmlmeext->mgnt_seq++;
++
++	
++		pattrib->last_txcmdsz = pattrib->pktlen;
++	
++		dump_mgntframe(padapter, pmgntframe);
++		
++	}
++	else
++	{
++		DBG_8192C("frame_ctl=0x%x\n", frame_ctl & (RTW_IEEE80211_FCTL_FTYPE|RTW_IEEE80211_FCTL_STYPE));
++	}
++
++	
++fail:
++	
++	dev_kfree_skb(skb);
++
++	return 0;
++	
++}
++
++static void rtw_cfg80211_monitor_if_set_multicast_list(struct net_device *ndev)
++{
++	DBG_8192C("%s\n", __func__);
++}
++
++static int rtw_cfg80211_monitor_if_set_mac_address(struct net_device *ndev, void *addr)
++{
++	int ret = 0;
++	
++	DBG_8192C("%s\n", __func__);
++	
++	return ret;
++}
++
++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,29))
++static const struct net_device_ops rtw_cfg80211_monitor_if_ops = {
++	.ndo_open = rtw_cfg80211_monitor_if_open,
++       .ndo_stop = rtw_cfg80211_monitor_if_close,
++       .ndo_start_xmit = rtw_cfg80211_monitor_if_xmit_entry,
++       #if (LINUX_VERSION_CODE < KERNEL_VERSION(3,2,0))
++       .ndo_set_multicast_list = rtw_cfg80211_monitor_if_set_multicast_list,
++       #endif
++       .ndo_set_mac_address = rtw_cfg80211_monitor_if_set_mac_address,       
++};
++#endif
++
++static int rtw_cfg80211_add_monitor_if(_adapter *padapter, char *name, struct net_device **ndev)
++{
++	int ret = 0;
++	struct net_device* mon_ndev = NULL;
++	struct wireless_dev* mon_wdev = NULL;
++	struct rtw_netdev_priv_indicator *pnpi;
++	struct rtw_wdev_priv *pwdev_priv = wdev_to_priv(padapter->rtw_wdev);
++		
++	if (!name ) {
++		DBG_871X(FUNC_ADPT_FMT" without specific name\n", FUNC_ADPT_ARG(padapter));
++		ret = -EINVAL;
++		goto out;
++	}
++
++	if (pwdev_priv->pmon_ndev) {
++		DBG_871X(FUNC_ADPT_FMT" monitor interface exist: "NDEV_FMT"\n",
++			FUNC_ADPT_ARG(padapter), NDEV_ARG(pwdev_priv->pmon_ndev));
++		ret = -EBUSY;
++		goto out;
++	}
++
++	mon_ndev = alloc_etherdev(sizeof(struct rtw_netdev_priv_indicator));
++	if (!mon_ndev) {
++		DBG_871X(FUNC_ADPT_FMT" allocate ndev fail\n", FUNC_ADPT_ARG(padapter));
++		ret = -ENOMEM;
++		goto out;
++	}
++
++	mon_ndev->type = ARPHRD_IEEE80211_RADIOTAP;
++	strncpy(mon_ndev->name, name, IFNAMSIZ);
++	mon_ndev->name[IFNAMSIZ - 1] = 0;
++	mon_ndev->destructor = rtw_ndev_destructor;
++	
++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,29))
++	mon_ndev->netdev_ops = &rtw_cfg80211_monitor_if_ops;
++#else
++	mon_ndev->open = rtw_cfg80211_monitor_if_open;
++	mon_ndev->stop = rtw_cfg80211_monitor_if_close;
++	mon_ndev->hard_start_xmit = rtw_cfg80211_monitor_if_xmit_entry;
++	mon_ndev->set_mac_address = rtw_cfg80211_monitor_if_set_mac_address;
++#endif
++
++	pnpi = netdev_priv(mon_ndev);
++	pnpi->priv = padapter;
++	pnpi->sizeof_priv = sizeof(_adapter);
++
++	/*  wdev */
++	mon_wdev = (struct wireless_dev *)rtw_zmalloc(sizeof(struct wireless_dev));
++	if (!mon_wdev) {
++		DBG_871X(FUNC_ADPT_FMT" allocate mon_wdev fail\n", FUNC_ADPT_ARG(padapter));
++		ret = -ENOMEM;
++		goto out;
++	}
++
++	mon_wdev->wiphy = padapter->rtw_wdev->wiphy;
++	mon_wdev->netdev = mon_ndev;
++	mon_wdev->iftype = NL80211_IFTYPE_MONITOR;
++	mon_ndev->ieee80211_ptr = mon_wdev;
++
++	ret = register_netdevice(mon_ndev);
++	if (ret) {
++		goto out;
++	}
++
++	*ndev = pwdev_priv->pmon_ndev = mon_ndev;
++	_rtw_memcpy(pwdev_priv->ifname_mon, name, IFNAMSIZ+1);
++
++out:
++	if (ret && mon_wdev) {
++		rtw_mfree((u8*)mon_wdev, sizeof(struct wireless_dev));
++		mon_wdev = NULL;
++	}
++
++	if (ret && mon_ndev) {
++		free_netdev(mon_ndev);
++		*ndev = mon_ndev = NULL;
++	}
++
++	return ret;
++}
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,6,0))
++static struct wireless_dev *
++#elif (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)) || defined(COMPAT_KERNEL_RELEASE)
++static struct net_device *
++#else
++static int
++#endif
++	cfg80211_rtw_add_virtual_intf(
++		struct wiphy *wiphy,
++	#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,7,0))
++		const char *name,
++	#else
++		char *name,
++	#endif
++		enum nl80211_iftype type, u32 *flags, struct vif_params *params)
++{
++	int ret = 0;
++	struct net_device* ndev = NULL;
++	_adapter *padapter = wiphy_to_adapter(wiphy);
++
++	DBG_871X(FUNC_ADPT_FMT " wiphy:%s, name:%s, type:%d\n",
++		FUNC_ADPT_ARG(padapter), wiphy_name(wiphy), name, type);
++
++	switch (type) {
++	case NL80211_IFTYPE_ADHOC:
++	case NL80211_IFTYPE_AP_VLAN:
++	case NL80211_IFTYPE_WDS:
++	case NL80211_IFTYPE_MESH_POINT:
++		ret = -ENODEV;
++		break;
++	case NL80211_IFTYPE_MONITOR:
++		ret = rtw_cfg80211_add_monitor_if(padapter, (char *)name, &ndev);
++		break;
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE)
++	case NL80211_IFTYPE_P2P_CLIENT:
++#endif
++	case NL80211_IFTYPE_STATION:
++		ret = -ENODEV;
++		break;
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE)
++	case NL80211_IFTYPE_P2P_GO:
++#endif
++	case NL80211_IFTYPE_AP:
++		ret = -ENODEV;
++		break;
++	default:
++		ret = -ENODEV;
++		DBG_871X("Unsupported interface type\n");
++		break;
++	}
++
++	DBG_871X(FUNC_ADPT_FMT" ndev:%p, ret:%d\n", FUNC_ADPT_ARG(padapter), ndev, ret);
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,6,0))
++	return ndev ? ndev->ieee80211_ptr : ERR_PTR(ret);
++#elif (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)) || defined(COMPAT_KERNEL_RELEASE)
++	return ndev ? ndev : ERR_PTR(ret);
++#else
++	return ret;
++#endif
++}
++
++static int cfg80211_rtw_del_virtual_intf(struct wiphy *wiphy,
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,6,0))
++	struct wireless_dev *wdev
++#else
++	struct net_device *ndev
++#endif
++)
++{
++	struct rtw_wdev_priv *pwdev_priv = (struct rtw_wdev_priv *)wiphy_priv(wiphy);
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,6,0))
++	struct net_device *ndev;
++	ndev = wdev ? wdev->netdev : NULL;
++#endif
++
++	if (!ndev)
++		goto exit;
++
++	unregister_netdevice(ndev);
++
++	if (ndev == pwdev_priv->pmon_ndev) {
++		pwdev_priv->pmon_ndev = NULL;
++		pwdev_priv->ifname_mon[0] = '\0';
++		DBG_871X(FUNC_NDEV_FMT" remove monitor interface\n", FUNC_NDEV_ARG(ndev));
++	}
++
++exit:
++	return 0;
++}
++
++static int rtw_add_beacon(_adapter *adapter, const u8 *head, size_t head_len, const u8 *tail, size_t tail_len)
++{
++	int ret=0;
++	u8 *pbuf = NULL;
++	uint len, wps_ielen=0;	
++	uint p2p_ielen=0;
++	u8 *p2p_ie;
++	u8 got_p2p_ie = _FALSE;
++	struct mlme_priv *pmlmepriv = &(adapter->mlmepriv);
++	//struct sta_priv *pstapriv = &padapter->stapriv;
++	
++
++	DBG_8192C("%s beacon_head_len=%zu, beacon_tail_len=%zu\n", __FUNCTION__, head_len, tail_len);
++
++	
++	if(check_fwstate(pmlmepriv, WIFI_AP_STATE) != _TRUE)
++		return -EINVAL;
++
++	if(head_len<24)
++		return -EINVAL;
++	
++
++	pbuf = rtw_zmalloc(head_len+tail_len);
++	if(!pbuf)
++		return -ENOMEM;
++	
++
++	//_rtw_memcpy(&pstapriv->max_num_sta, param->u.bcn_ie.reserved, 2);
++
++	//if((pstapriv->max_num_sta>NUM_STA) || (pstapriv->max_num_sta<=0))
++	//	pstapriv->max_num_sta = NUM_STA;
++
++	
++	_rtw_memcpy(pbuf, (void *)head+24, head_len-24);// 24=beacon header len.
++	_rtw_memcpy(pbuf+head_len-24, (void *)tail, tail_len);
++
++	len = head_len+tail_len-24;
++
++	//check wps ie if inclued
++	if(rtw_get_wps_ie(pbuf+_FIXED_IE_LENGTH_, len-_FIXED_IE_LENGTH_, NULL, &wps_ielen))
++		DBG_8192C("add bcn, wps_ielen=%d\n", wps_ielen);
++
++#ifdef CONFIG_P2P
++	//check p2p ie if inclued
++	if( adapter->wdinfo.driver_interface == DRIVER_CFG80211 )
++	{
++		//check p2p if enable
++		if(rtw_get_p2p_ie(pbuf+_FIXED_IE_LENGTH_, len-_FIXED_IE_LENGTH_, NULL, &p2p_ielen))
++		{
++			struct mlme_ext_priv *pmlmeext = &adapter->mlmeextpriv;
++			struct wifidirect_info *pwdinfo= &(adapter->wdinfo);
++
++			DBG_8192C("got p2p_ie, len=%d\n", p2p_ielen);
++			got_p2p_ie = _TRUE;
++		
++			if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++			{			
++				DBG_8192C("Enable P2P function for the first time\n");
++				rtw_p2p_enable(adapter, P2P_ROLE_GO);
++				wdev_to_priv(adapter->rtw_wdev)->p2p_enabled = _TRUE;
++			}
++			else
++			{
++				_cancel_timer_ex( &pwdinfo->find_phase_timer );
++				_cancel_timer_ex( &pwdinfo->restore_p2p_state_timer );
++				_cancel_timer_ex( &pwdinfo->pre_tx_scan_timer);	
++
++				DBG_8192C("enter GO Mode, p2p_ielen=%d\n", p2p_ielen);			
++
++				rtw_p2p_set_role(pwdinfo, P2P_ROLE_GO);
++				rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_OK);
++				pwdinfo->intent = 15;		
++			}
++		}
++	}
++#endif // CONFIG_P2P
++
++	/* pbss_network->IEs will not include p2p_ie, wfd ie */
++	rtw_ies_remove_ie(pbuf, &len, _BEACON_IE_OFFSET_, _VENDOR_SPECIFIC_IE_, P2P_OUI, 4);
++	rtw_ies_remove_ie(pbuf, &len, _BEACON_IE_OFFSET_, _VENDOR_SPECIFIC_IE_, WFD_OUI, 4);
++
++	if (rtw_check_beacon_data(adapter, pbuf,  len) == _SUCCESS)
++	{
++#ifdef  CONFIG_P2P		
++		//check p2p if enable
++		if(got_p2p_ie == _TRUE)
++		{
++			struct mlme_ext_priv *pmlmeext = &adapter->mlmeextpriv;
++			struct wifidirect_info *pwdinfo= &(adapter->wdinfo);
++			pwdinfo->operating_channel = pmlmeext->cur_channel;
++		}
++#endif //CONFIG_P2P
++		ret = 0;
++	}	
++	else
++	{
++		ret = -EINVAL;
++	}	
++	
++
++	rtw_mfree(pbuf, head_len+tail_len);	
++	
++	return ret;	
++}
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,4,0)) && !defined(COMPAT_KERNEL_RELEASE)
++static int	cfg80211_rtw_add_beacon(struct wiphy *wiphy, struct net_device *ndev,
++			      struct beacon_parameters *info)
++{
++	int ret=0;
++	_adapter *adapter = wiphy_to_adapter(wiphy);
++
++	DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev));
++	ret = rtw_add_beacon(adapter, info->head, info->head_len, info->tail, info->tail_len);
++
++	return ret;
++}
++
++static int	cfg80211_rtw_set_beacon(struct wiphy *wiphy, struct net_device *ndev,
++			      struct beacon_parameters *info)
++{
++	_adapter *padapter = wiphy_to_adapter(wiphy);	
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	
++	DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev));
++
++	pmlmeext->bstart_bss = _TRUE;
++
++	cfg80211_rtw_add_beacon(wiphy, ndev, info);
++	
++	return 0;
++}
++
++static int	cfg80211_rtw_del_beacon(struct wiphy *wiphy, struct net_device *ndev)
++{
++	DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev));
++	
++	return 0;
++}
++#else
++static int cfg80211_rtw_start_ap(struct wiphy *wiphy, struct net_device *ndev,
++								struct cfg80211_ap_settings *settings)
++{
++	int ret = 0;
++	_adapter *adapter = wiphy_to_adapter(wiphy);
++	
++	DBG_871X(FUNC_NDEV_FMT" hidden_ssid:%d, auth_type:%d\n", FUNC_NDEV_ARG(ndev),
++		settings->hidden_ssid, settings->auth_type);
++
++	ret = rtw_add_beacon(adapter, settings->beacon.head, settings->beacon.head_len,
++		settings->beacon.tail, settings->beacon.tail_len);
++
++	adapter->mlmeextpriv.mlmext_info.hidden_ssid_mode = settings->hidden_ssid;
++	
++	if (settings->ssid && settings->ssid_len) {
++		WLAN_BSSID_EX *pbss_network = &adapter->mlmepriv.cur_network.network;
++		WLAN_BSSID_EX *pbss_network_ext = &adapter->mlmeextpriv.mlmext_info.network;
++
++		if(0)
++		DBG_871X(FUNC_ADPT_FMT" ssid:(%s,%d), from ie:(%s,%d)\n", FUNC_ADPT_ARG(adapter),
++			settings->ssid, settings->ssid_len,
++			pbss_network->Ssid.Ssid, pbss_network->Ssid.SsidLength);
++
++		_rtw_memcpy(pbss_network->Ssid.Ssid, (void *)settings->ssid, settings->ssid_len);
++		pbss_network->Ssid.SsidLength = settings->ssid_len;
++		_rtw_memcpy(pbss_network_ext->Ssid.Ssid, (void *)settings->ssid, settings->ssid_len);
++		pbss_network_ext->Ssid.SsidLength = settings->ssid_len;
++
++		if(0)
++		DBG_871X(FUNC_ADPT_FMT" after ssid:(%s,%d), (%s,%d)\n", FUNC_ADPT_ARG(adapter),
++			pbss_network->Ssid.Ssid, pbss_network->Ssid.SsidLength,
++			pbss_network_ext->Ssid.Ssid, pbss_network_ext->Ssid.SsidLength);
++	}
++
++	return ret;
++}
++
++static int cfg80211_rtw_change_beacon(struct wiphy *wiphy, struct net_device *ndev,
++                                struct cfg80211_beacon_data *info)
++{
++	int ret = 0;
++	_adapter *adapter = wiphy_to_adapter(wiphy);
++
++	DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev));
++
++	ret = rtw_add_beacon(adapter, info->head, info->head_len, info->tail, info->tail_len);
++
++	return ret;
++}
++
++static int cfg80211_rtw_stop_ap(struct wiphy *wiphy, struct net_device *ndev)
++{
++	DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev));
++	return 0;
++}
++
++#endif //(LINUX_VERSION_CODE < KERNEL_VERSION(3,4,0))
++
++static int	cfg80211_rtw_add_station(struct wiphy *wiphy, struct net_device *ndev,
++			       u8 *mac, struct station_parameters *params)
++{
++	DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev));
++	
++	return 0;
++}
++
++static int	cfg80211_rtw_del_station(struct wiphy *wiphy, struct net_device *ndev,
++			       u8 *mac)
++{
++	int ret=0;	
++	_irqL irqL;
++	_list	*phead, *plist;
++	u8 updated;
++	struct sta_info *psta = NULL;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(ndev);
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct sta_priv *pstapriv = &padapter->stapriv;
++
++	DBG_871X("+"FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev));
++
++	if(check_fwstate(pmlmepriv, (_FW_LINKED|WIFI_AP_STATE)) != _TRUE)		
++	{
++		DBG_8192C("%s, fw_state != FW_LINKED|WIFI_AP_STATE\n", __func__);
++		return -EINVAL;		
++	}
++
++
++	if(!mac)
++	{
++		DBG_8192C("flush all sta, and cam_entry\n");
++
++		flush_all_cam_entry(padapter);	//clear CAM
++
++		ret = rtw_sta_flush(padapter);
++		
++		return ret;
++	}	
++
++
++	DBG_8192C("free sta macaddr =" MAC_FMT "\n", MAC_ARG(mac));
++
++	if (mac[0] == 0xff && mac[1] == 0xff &&
++	    mac[2] == 0xff && mac[3] == 0xff &&
++	    mac[4] == 0xff && mac[5] == 0xff) 
++	{
++		return -EINVAL;	
++	}
++
++
++	_enter_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++	
++	phead = &pstapriv->asoc_list;
++	plist = get_next(phead);
++
++	//check asoc_queue
++	while ((rtw_end_of_queue_search(phead, plist)) == _FALSE)	
++	{
++		psta = LIST_CONTAINOR(plist, struct sta_info, asoc_list);
++		
++		plist = get_next(plist);	
++	
++		if(_rtw_memcmp(mac, psta->hwaddr, ETH_ALEN))		
++		{
++			if(psta->dot8021xalg == 1 && psta->bpairwise_key_installed == _FALSE)
++			{
++				DBG_8192C("%s, sta's dot8021xalg = 1 and key_installed = _FALSE\n", __func__);
++			}
++			else
++			{
++				DBG_8192C("free psta=%p, aid=%d\n", psta, psta->aid);
++
++				rtw_list_delete(&psta->asoc_list);
++				pstapriv->asoc_list_cnt--;
++
++				//_exit_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++				updated = ap_free_sta(padapter, psta, _TRUE, WLAN_REASON_DEAUTH_LEAVING);
++				//_enter_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++
++				psta = NULL;
++
++				break;
++			}		
++					
++		}
++		
++	}
++
++	_exit_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++
++	associated_clients_update(padapter, updated);
++
++	DBG_871X("-"FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev));
++	
++	return ret;	
++
++}
++
++static int	cfg80211_rtw_change_station(struct wiphy *wiphy, struct net_device *ndev,
++				  u8 *mac, struct station_parameters *params)
++{
++	DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev));
++	
++	return 0;
++}
++
++static int	cfg80211_rtw_dump_station(struct wiphy *wiphy, struct net_device *ndev,
++			       int idx, u8 *mac, struct station_info *sinfo)
++{
++	DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev));
++
++	//TODO: dump scanned queue
++
++	return -ENOENT;
++}
++
++static int	cfg80211_rtw_change_bss(struct wiphy *wiphy, struct net_device *ndev,
++			      struct bss_parameters *params)
++{
++	u8 i;
++
++	DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev));
++/*
++	DBG_8192C("use_cts_prot=%d\n", params->use_cts_prot);
++	DBG_8192C("use_short_preamble=%d\n", params->use_short_preamble);
++	DBG_8192C("use_short_slot_time=%d\n", params->use_short_slot_time);
++	DBG_8192C("ap_isolate=%d\n", params->ap_isolate);
++
++	DBG_8192C("basic_rates_len=%d\n", params->basic_rates_len);
++	for(i=0; i<params->basic_rates_len; i++)
++	{		
++		DBG_8192C("basic_rates=%d\n", params->basic_rates[i]);
++		
++	}	
++*/	
++	return 0;
++	
++}
++
++static int	cfg80211_rtw_set_channel(struct wiphy *wiphy
++	#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,35))
++	, struct net_device *ndev
++	#endif
++	, struct ieee80211_channel *chan, enum nl80211_channel_type channel_type)
++{
++	#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,35))
++	DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev));
++	#endif
++	
++	return 0;
++}
++
++static int	cfg80211_rtw_auth(struct wiphy *wiphy, struct net_device *ndev,
++			struct cfg80211_auth_request *req)
++{
++	DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev));
++	
++	return 0;
++}
++
++static int	cfg80211_rtw_assoc(struct wiphy *wiphy, struct net_device *ndev,
++			 struct cfg80211_assoc_request *req)
++{
++	DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev));
++	
++	return 0;
++}
++#endif //CONFIG_AP_MODE
++
++void rtw_cfg80211_rx_action_p2p(_adapter *padapter, u8 *pmgmt_frame, uint frame_len)
++{
++	int type;
++	s32 freq;
++	int channel;
++	struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv);
++	u8 category, action;
++
++	channel = rtw_get_oper_ch(padapter);
++
++	DBG_8192C("RTW_Rx:cur_ch=%d\n", channel);
++	#ifdef CONFIG_P2P
++	type = rtw_p2p_check_frames(padapter, pmgmt_frame, frame_len, _FALSE);
++	if (type >= 0)
++		goto indicate;
++	#endif
++	rtw_action_frame_parse(pmgmt_frame, frame_len, &category, &action);
++	DBG_871X("RTW_Rx:category(%u), action(%u)\n", category, action);
++
++indicate:
++	if (channel <= RTW_CH_MAX_2G_CHANNEL)
++		freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ);
++	else
++		freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_5GHZ);
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE)
++	rtw_cfg80211_rx_mgmt(padapter, freq, 0, pmgmt_frame, frame_len, GFP_ATOMIC);
++#else
++	cfg80211_rx_action(padapter->pnetdev, freq, pmgmt_frame, frame_len, GFP_ATOMIC);
++#endif
++}
++
++void rtw_cfg80211_rx_p2p_action_public(_adapter *padapter, u8 *pmgmt_frame, uint frame_len)
++{
++	int type;
++	s32 freq;
++	int channel;
++	struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv);
++	u8 category, action;
++
++	channel = rtw_get_oper_ch(padapter);
++
++	DBG_8192C("RTW_Rx:cur_ch=%d\n", channel);
++	#ifdef CONFIG_P2P
++	type = rtw_p2p_check_frames(padapter, pmgmt_frame, frame_len, _FALSE);
++	if (type >= 0) {
++		switch (type) {
++		case P2P_GO_NEGO_CONF:
++		case P2P_PROVISION_DISC_RESP:
++		case P2P_INVIT_RESP:
++			rtw_set_scan_deny(padapter, 2000);
++			rtw_clear_scan_deny(padapter);
++		}
++		goto indicate;
++	}
++	#endif
++	rtw_action_frame_parse(pmgmt_frame, frame_len, &category, &action);
++	DBG_871X("RTW_Rx:category(%u), action(%u)\n", category, action);
++
++indicate:
++	if (channel <= RTW_CH_MAX_2G_CHANNEL)
++		freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ);
++	else
++		freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_5GHZ);
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE)
++	rtw_cfg80211_rx_mgmt(padapter, freq, 0, pmgmt_frame, frame_len, GFP_ATOMIC);
++#else
++	cfg80211_rx_action(padapter->pnetdev, freq, pmgmt_frame, frame_len, GFP_ATOMIC);
++#endif
++}
++
++void rtw_cfg80211_rx_action(_adapter *adapter, u8 *frame, uint frame_len, const char*msg)
++{
++	s32 freq;
++	int channel;
++	struct mlme_ext_priv *pmlmeext = &(adapter->mlmeextpriv);	
++	struct rtw_wdev_priv *pwdev_priv = wdev_to_priv(adapter->rtw_wdev);
++	u8 category, action;
++
++	channel = rtw_get_oper_ch(adapter);
++
++	rtw_action_frame_parse(frame, frame_len, &category, &action);
++
++	DBG_8192C("RTW_Rx:cur_ch=%d\n", channel);
++	if (msg)
++		DBG_871X("RTW_Rx:%s\n", msg);
++	else
++		DBG_871X("RTW_Rx:category(%u), action(%u)\n", category, action);
++
++	if (channel <= RTW_CH_MAX_2G_CHANNEL)
++		freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ);
++	else
++		freq = rtw_ieee80211_channel_to_frequency(channel, IEEE80211_BAND_5GHZ);
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE)
++	rtw_cfg80211_rx_mgmt(adapter, freq, 0, frame, frame_len, GFP_ATOMIC);
++#else
++	cfg80211_rx_action(adapter->pnetdev, freq, frame, frame_len, GFP_ATOMIC);
++#endif
++
++}
++
++#ifdef CONFIG_P2P
++void rtw_cfg80211_issue_p2p_provision_request(_adapter *padapter, const u8 *buf, size_t len)
++{
++	u16	wps_devicepassword_id = 0x0000;
++	uint	wps_devicepassword_id_len = 0;
++	u8			wpsie[ 255 ] = { 0x00 }, p2p_ie[ 255 ] = { 0x00 };
++	uint			p2p_ielen = 0;
++	uint			wpsielen = 0;
++	u32	devinfo_contentlen = 0;
++	u8	devinfo_content[64] = { 0x00 };
++	u16	capability = 0;
++	uint capability_len = 0;
++	
++	unsigned char category = RTW_WLAN_CATEGORY_PUBLIC;
++	u8			action = P2P_PUB_ACTION_ACTION;
++	u8			dialogToken = 1;
++	u32			p2poui = cpu_to_be32(P2POUI);
++	u8			oui_subtype = P2P_PROVISION_DISC_REQ;	
++	u32			p2pielen = 0;
++#ifdef CONFIG_WFD
++	u32					wfdielen = 0;
++#endif //CONFIG_WFD		
++	
++	struct xmit_frame			*pmgntframe;
++	struct pkt_attrib			*pattrib;
++	unsigned char					*pframe;
++	struct rtw_ieee80211_hdr	*pwlanhdr;
++	unsigned short				*fctrl;
++	struct xmit_priv			*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	
++	struct wifidirect_info *pwdinfo = &(padapter->wdinfo);
++	u8 *frame_body = (unsigned char *)(buf + sizeof(struct rtw_ieee80211_hdr_3addr));
++	size_t frame_body_len = len - sizeof(struct rtw_ieee80211_hdr_3addr);
++
++
++	DBG_871X( "[%s] In\n", __FUNCTION__ );
++
++	//prepare for building provision_request frame	
++	_rtw_memcpy(pwdinfo->tx_prov_disc_info.peerIFAddr, GetAddr1Ptr(buf), ETH_ALEN);
++	_rtw_memcpy(pwdinfo->tx_prov_disc_info.peerDevAddr, GetAddr1Ptr(buf), ETH_ALEN);
++	
++	pwdinfo->tx_prov_disc_info.wps_config_method_request = WPS_CM_PUSH_BUTTON;
++		
++	rtw_get_wps_ie( frame_body + _PUBLIC_ACTION_IE_OFFSET_, frame_body_len - _PUBLIC_ACTION_IE_OFFSET_, wpsie, &wpsielen);
++	rtw_get_wps_attr_content( wpsie, wpsielen, WPS_ATTR_DEVICE_PWID, (u8*) &wps_devicepassword_id, &wps_devicepassword_id_len);
++	wps_devicepassword_id = be16_to_cpu( wps_devicepassword_id );
++
++	switch(wps_devicepassword_id) 
++	{
++		case WPS_DPID_PIN:
++			pwdinfo->tx_prov_disc_info.wps_config_method_request = WPS_CM_LABEL;
++			break;
++		case WPS_DPID_USER_SPEC:
++			pwdinfo->tx_prov_disc_info.wps_config_method_request = WPS_CM_DISPLYA;
++			break;
++		case WPS_DPID_MACHINE_SPEC:
++			break;
++		case WPS_DPID_REKEY:
++			break;
++		case WPS_DPID_PBC:
++			pwdinfo->tx_prov_disc_info.wps_config_method_request = WPS_CM_PUSH_BUTTON;
++			break;
++		case WPS_DPID_REGISTRAR_SPEC:
++			pwdinfo->tx_prov_disc_info.wps_config_method_request = WPS_CM_KEYPAD;
++			break;
++		default:
++			break;
++	}
++
++
++	if ( rtw_get_p2p_ie( frame_body + _PUBLIC_ACTION_IE_OFFSET_, frame_body_len - _PUBLIC_ACTION_IE_OFFSET_, p2p_ie, &p2p_ielen ) )
++	{	
++
++		rtw_get_p2p_attr_content( p2p_ie, p2p_ielen, P2P_ATTR_DEVICE_INFO, devinfo_content, &devinfo_contentlen);					
++		rtw_get_p2p_attr_content( p2p_ie, p2p_ielen, P2P_ATTR_CAPABILITY, (u8*)&capability, &capability_len);
++						
++	}
++
++
++	//start to build provision_request frame	
++	_rtw_memset(wpsie, 0, sizeof(wpsie));
++	_rtw_memset(p2p_ie, 0, sizeof(p2p_ie));
++	p2p_ielen = 0;	
++	
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		return;
++	}
++
++	
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);
++
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++
++	fctrl = &(pwlanhdr->frame_ctl);
++	*(fctrl) = 0;
++
++	_rtw_memcpy(pwlanhdr->addr1, pwdinfo->tx_prov_disc_info.peerDevAddr, ETH_ALEN);
++	_rtw_memcpy(pwlanhdr->addr2, myid(&(padapter->eeprompriv)), ETH_ALEN);	
++	_rtw_memcpy(pwlanhdr->addr3, pwdinfo->tx_prov_disc_info.peerDevAddr, ETH_ALEN);
++
++	SetSeqNum(pwlanhdr, pmlmeext->mgnt_seq);
++	pmlmeext->mgnt_seq++;
++	SetFrameSubType(pframe, WIFI_ACTION);
++
++	pframe += sizeof(struct rtw_ieee80211_hdr_3addr);
++	pattrib->pktlen = sizeof(struct rtw_ieee80211_hdr_3addr);
++
++	pframe = rtw_set_fixed_ie(pframe, 1, &(category), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(action), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 4, (unsigned char *) &(p2poui), &(pattrib->pktlen));
++	pframe = rtw_set_fixed_ie(pframe, 1, &(oui_subtype), &(pattrib->pktlen));	
++	pframe = rtw_set_fixed_ie(pframe, 1, &(dialogToken), &(pattrib->pktlen));		
++
++
++	//build_prov_disc_request_p2p_ie	
++	//	P2P OUI
++	p2pielen = 0;
++	p2p_ie[ p2pielen++ ] = 0x50;
++	p2p_ie[ p2pielen++ ] = 0x6F;
++	p2p_ie[ p2pielen++ ] = 0x9A;
++	p2p_ie[ p2pielen++ ] = 0x09;	//	WFA P2P v1.0
++
++	//	Commented by Albert 20110301
++	//	According to the P2P Specification, the provision discovery request frame should contain 3 P2P attributes
++	//	1. P2P Capability
++	//	2. Device Info
++	//	3. Group ID ( When joining an operating P2P Group )
++
++	//	P2P Capability ATTR
++	//	Type:	
++	p2p_ie[ p2pielen++ ] = P2P_ATTR_CAPABILITY;
++
++	//	Length:
++	//*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 0x0002 );
++	RTW_PUT_LE16(p2p_ie + p2pielen, 0x0002);
++	p2pielen += 2;
++
++	//	Value:
++	//	Device Capability Bitmap, 1 byte
++	//	Group Capability Bitmap, 1 byte
++	_rtw_memcpy(p2p_ie + p2pielen, &capability, 2);
++	p2pielen += 2;
++	
++
++	//	Device Info ATTR
++	//	Type:
++	p2p_ie[ p2pielen++ ] = P2P_ATTR_DEVICE_INFO;
++
++	//	Length:
++	//	21 -> P2P Device Address (6bytes) + Config Methods (2bytes) + Primary Device Type (8bytes) 
++	//	+ NumofSecondDevType (1byte) + WPS Device Name ID field (2bytes) + WPS Device Name Len field (2bytes)
++	//*(u16*) ( p2pie + p2pielen ) = cpu_to_le16( 21 + pwdinfo->device_name_len );
++	RTW_PUT_LE16(p2p_ie + p2pielen, devinfo_contentlen);
++	p2pielen += 2;
++
++	//	Value:
++	_rtw_memcpy(p2p_ie + p2pielen, devinfo_content, devinfo_contentlen);
++	p2pielen += devinfo_contentlen;
++
++
++	pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, p2pielen, (unsigned char *) p2p_ie, &p2p_ielen);			
++	//p2pielen = build_prov_disc_request_p2p_ie( pwdinfo, pframe, NULL, 0, pwdinfo->tx_prov_disc_info.peerDevAddr);
++	//pframe += p2pielen;
++	pattrib->pktlen += p2p_ielen;
++
++	wpsielen = 0;
++	//	WPS OUI
++	*(u32*) ( wpsie ) = cpu_to_be32( WPSOUI );
++	wpsielen += 4;
++
++	//	WPS version
++	//	Type:
++	*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_VER1 );
++	wpsielen += 2;
++
++	//	Length:
++	*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0001 );
++	wpsielen += 2;
++
++	//	Value:
++	wpsie[wpsielen++] = WPS_VERSION_1;	//	Version 1.0
++
++	//	Config Method
++	//	Type:
++	*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( WPS_ATTR_CONF_METHOD );
++	wpsielen += 2;
++
++	//	Length:
++	*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( 0x0002 );
++	wpsielen += 2;
++
++	//	Value:
++	*(u16*) ( wpsie + wpsielen ) = cpu_to_be16( pwdinfo->tx_prov_disc_info.wps_config_method_request );
++	wpsielen += 2;
++
++	pframe = rtw_set_ie(pframe, _VENDOR_SPECIFIC_IE_, wpsielen, (unsigned char *) wpsie, &pattrib->pktlen );
++
++
++#ifdef CONFIG_WFD
++	wfdielen = build_provdisc_req_wfd_ie(pwdinfo, pframe);
++	pframe += wfdielen;
++	pattrib->pktlen += wfdielen;
++#endif //CONFIG_WFD
++
++	pattrib->last_txcmdsz = pattrib->pktlen;
++
++	//dump_mgntframe(padapter, pmgntframe);
++	if (dump_mgntframe_and_wait_ack(padapter, pmgntframe) != _SUCCESS)
++		DBG_8192C("%s, ack to\n", __func__);
++
++	//if(wps_devicepassword_id == WPS_DPID_REGISTRAR_SPEC)
++	//{
++	//	DBG_8192C("waiting for p2p peer key-in PIN CODE\n");
++	//	rtw_msleep_os(15000); // 15 sec for key in PIN CODE, workaround for GS2 before issuing Nego Req.
++	//}	
++
++}
++
++static s32 cfg80211_rtw_remain_on_channel(struct wiphy *wiphy,
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,6,0))
++	struct wireless_dev *wdev,
++#else
++	struct net_device *ndev,
++#endif
++	struct ieee80211_channel * channel,
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,8,0))
++	enum nl80211_channel_type channel_type,
++#endif
++	unsigned int duration, u64 *cookie)
++{
++	s32 err = 0;
++	_adapter *padapter = wiphy_to_adapter(wiphy);
++	struct rtw_wdev_priv *pwdev_priv = wdev_to_priv(padapter->rtw_wdev);
++	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
++	struct wifidirect_info *pwdinfo = &padapter->wdinfo;
++	struct cfg80211_wifidirect_info *pcfg80211_wdinfo = &padapter->cfg80211_wdinfo;
++	u8 remain_ch = (u8) ieee80211_frequency_to_channel(channel->center_freq);
++	u8 ready_on_channel = _FALSE;
++
++	DBG_871X(FUNC_ADPT_FMT" ch:%u duration:%d\n", FUNC_ADPT_ARG(padapter), remain_ch, duration);
++
++	if(pcfg80211_wdinfo->is_ro_ch == _TRUE)
++	{
++		DBG_8192C("%s, cancel ro ch timer\n", __func__);
++		
++		_cancel_timer_ex(&padapter->cfg80211_wdinfo.remain_on_ch_timer);
++
++#ifdef CONFIG_CONCURRENT_MODE
++                ATOMIC_SET(&pwdev_priv->ro_ch_to, 1);			
++#endif //CONFIG_CONCURRENT_MODE	
++
++		p2p_protocol_wk_hdl(padapter, P2P_RO_CH_WK);
++	}
++
++	pcfg80211_wdinfo->is_ro_ch = _TRUE;
++
++	if(_FAIL == rtw_pwr_wakeup(padapter)) {
++		err = -EFAULT;
++		goto exit;
++	}
++
++	_rtw_memcpy(&pcfg80211_wdinfo->remain_on_ch_channel, channel, sizeof(struct ieee80211_channel));
++	#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,8,0))
++	pcfg80211_wdinfo->remain_on_ch_type= channel_type;
++	#endif
++	pcfg80211_wdinfo->remain_on_ch_cookie= *cookie;
++
++	rtw_scan_abort(padapter);
++#ifdef CONFIG_CONCURRENT_MODE		
++	if(rtw_buddy_adapter_up(padapter))	
++		rtw_scan_abort(padapter->pbuddy_adapter);			
++#endif //CONFIG_CONCURRENT_MODE
++
++	//if(!rtw_p2p_chk_role(pwdinfo, P2P_ROLE_CLIENT) && !rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO))
++	if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++	{
++		rtw_p2p_enable(padapter, P2P_ROLE_DEVICE);
++		wdev_to_priv(padapter->rtw_wdev)->p2p_enabled = _TRUE;
++	}
++	else
++	{
++		rtw_p2p_set_pre_state(pwdinfo, rtw_p2p_state(pwdinfo));
++#ifdef CONFIG_DEBUG_CFG80211		
++		DBG_8192C("%s, role=%d, p2p_state=%d\n", __func__, rtw_p2p_role(pwdinfo), rtw_p2p_state(pwdinfo));
++#endif
++	}
++
++
++	rtw_p2p_set_state(pwdinfo, P2P_STATE_LISTEN);
++	
++	
++	if(duration < 400)
++		duration = duration*3;//extend from exper.
++
++
++#ifdef	CONFIG_CONCURRENT_MODE
++	if(check_buddy_fwstate(padapter, _FW_LINKED) &&
++		(duration<pwdinfo->ext_listen_interval)) 
++	{
++		duration = duration + 	pwdinfo->ext_listen_interval;
++	}
++#endif
++
++	pcfg80211_wdinfo->restore_channel = rtw_get_oper_ch(padapter);
++
++	if(rtw_ch_set_search_ch(pmlmeext->channel_set, remain_ch) >= 0) {
++#ifdef	CONFIG_CONCURRENT_MODE
++		if ( check_buddy_fwstate(padapter, _FW_LINKED ) )
++		{
++			PADAPTER pbuddy_adapter = padapter->pbuddy_adapter;			
++			struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;	
++
++			if(remain_ch != pbuddy_mlmeext->cur_channel)
++			{	
++				if(ATOMIC_READ(&pwdev_priv->switch_ch_to)==1 ||
++					(remain_ch != pmlmeext->cur_channel))
++				{
++					DBG_8192C("%s, issue nulldata pwrbit=1\n", __func__);		
++					issue_nulldata(padapter->pbuddy_adapter, NULL, 1, 3, 500);
++				
++					ATOMIC_SET(&pwdev_priv->switch_ch_to, 0);
++			
++					DBG_8192C("%s, set switch ch timer, duration=%d\n", __func__, duration-pwdinfo->ext_listen_interval);
++					_set_timer(&pwdinfo->ap_p2p_switch_timer, duration-pwdinfo->ext_listen_interval);	
++				}			
++			}
++		
++			ready_on_channel = _TRUE;
++			//pmlmeext->cur_channel = remain_ch;			
++			//set_channel_bwmode(padapter, remain_ch, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
++		}else 
++#endif //CONFIG_CONCURRENT_MODE
++		if(remain_ch != pmlmeext->cur_channel )
++		{
++			ready_on_channel = _TRUE;
++			//pmlmeext->cur_channel = remain_ch;			
++			//set_channel_bwmode(padapter, remain_ch, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
++		}
++	} else {
++		DBG_871X("%s remain_ch:%u not in channel plan!!!!\n", __FUNCTION__, remain_ch);
++	}
++	
++
++	//call this after other things have been done
++#ifdef	CONFIG_CONCURRENT_MODE	
++	if(ATOMIC_READ(&pwdev_priv->ro_ch_to)==1 ||
++		(remain_ch != pmlmeext->cur_channel))
++	{
++		u8 co_channel = 0xff;
++		ATOMIC_SET(&pwdev_priv->ro_ch_to, 0);
++#endif
++
++		if(ready_on_channel == _TRUE)
++		{			
++			if ( !check_fwstate(&padapter->mlmepriv, _FW_LINKED ) )
++				pmlmeext->cur_channel = remain_ch;
++			
++#ifdef	CONFIG_CONCURRENT_MODE
++			co_channel = rtw_get_oper_ch(padapter);
++
++			if(co_channel !=remain_ch)
++#endif
++			{
++				if (!padapter->mlmepriv.LinkDetectInfo.bBusyTraffic)
++					set_channel_bwmode(padapter, remain_ch, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);			
++			}
++		}
++		DBG_8192C("%s, set ro ch timer, duration=%d\n", __func__, duration);
++		_set_timer( &pcfg80211_wdinfo->remain_on_ch_timer, duration);
++
++#ifdef	CONFIG_CONCURRENT_MODE
++	}
++#endif
++
++	rtw_cfg80211_ready_on_channel(padapter, *cookie, channel, channel_type, duration, GFP_KERNEL);
++
++exit:
++	if (err)
++		pcfg80211_wdinfo->is_ro_ch = _FALSE;
++
++	return err;
++}
++
++static s32 cfg80211_rtw_cancel_remain_on_channel(struct wiphy *wiphy,
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,6,0))
++	struct wireless_dev *wdev,
++#else
++	struct net_device *ndev,
++#endif
++	u64 cookie)
++{
++	s32 err = 0;
++	_adapter *padapter = wiphy_to_adapter(wiphy);
++	struct rtw_wdev_priv *pwdev_priv = wdev_to_priv(padapter->rtw_wdev);
++	struct wifidirect_info *pwdinfo = &padapter->wdinfo;
++	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
++	struct cfg80211_wifidirect_info *pcfg80211_wdinfo = &padapter->cfg80211_wdinfo;
++
++	DBG_871X(FUNC_ADPT_FMT"\n", FUNC_ADPT_ARG(padapter));
++
++	if (pcfg80211_wdinfo->is_ro_ch == _TRUE) {
++		DBG_8192C("%s, cancel ro ch timer\n", __func__);
++		_cancel_timer_ex(&padapter->cfg80211_wdinfo.remain_on_ch_timer);
++		#ifdef CONFIG_CONCURRENT_MODE
++		ATOMIC_SET(&pwdev_priv->ro_ch_to, 1);
++		#endif
++		p2p_protocol_wk_hdl(padapter, P2P_RO_CH_WK);
++	}
++
++	#if 0
++	//	Disable P2P Listen State
++	if(!rtw_p2p_chk_role(pwdinfo, P2P_ROLE_CLIENT) && !rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO))
++	{
++		if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++		{
++			_cancel_timer_ex( &pwdinfo->find_phase_timer );
++			_cancel_timer_ex( &pwdinfo->restore_p2p_state_timer );
++			_cancel_timer_ex( &pwdinfo->pre_tx_scan_timer);
++			
++			rtw_p2p_set_state(pwdinfo, P2P_STATE_NONE);
++			_rtw_memset(pwdinfo, 0x00, sizeof(struct wifidirect_info));
++		}
++	}
++	else
++	#endif
++	{
++		 rtw_p2p_set_state(pwdinfo, rtw_p2p_pre_state(pwdinfo));
++#ifdef CONFIG_DEBUG_CFG80211		 
++		 DBG_8192C("%s, role=%d, p2p_state=%d\n", __func__, rtw_p2p_role(pwdinfo), rtw_p2p_state(pwdinfo));
++#endif
++	}
++	pcfg80211_wdinfo->is_ro_ch = _FALSE;
++
++	return err;
++}
++
++#endif //CONFIG_P2P
++
++static int _cfg80211_rtw_mgmt_tx(_adapter *padapter, u8 tx_ch, const u8 *buf, size_t len)
++{
++	struct xmit_frame	*pmgntframe;
++	struct pkt_attrib	*pattrib;
++	unsigned char	*pframe;
++	int ret = _FAIL;
++	bool ack = _TRUE;
++	struct rtw_ieee80211_hdr *pwlanhdr;
++	struct rtw_wdev_priv *pwdev_priv = wdev_to_priv(padapter->rtw_wdev);
++	struct xmit_priv	*pxmitpriv = &(padapter->xmitpriv);
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);	
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct wifidirect_info *pwdinfo = &padapter->wdinfo;
++	//struct cfg80211_wifidirect_info *pcfg80211_wdinfo = &padapter->cfg80211_wdinfo;
++
++	if(_FAIL == rtw_pwr_wakeup(padapter)) {
++		ret = -EFAULT;
++		goto exit;
++	}
++
++	rtw_set_scan_deny(padapter, 1000);
++
++	rtw_scan_abort(padapter);
++	#ifdef CONFIG_CONCURRENT_MODE		
++	if(rtw_buddy_adapter_up(padapter))	
++		rtw_scan_abort(padapter->pbuddy_adapter);
++	#endif /* CONFIG_CONCURRENT_MODE */
++
++	if (padapter->cfg80211_wdinfo.is_ro_ch == _TRUE) {
++		//DBG_8192C("%s, cancel ro ch timer\n", __func__);
++		//_cancel_timer_ex(&padapter->cfg80211_wdinfo.remain_on_ch_timer);
++		//padapter->cfg80211_wdinfo.is_ro_ch = _FALSE;
++		#ifdef CONFIG_CONCURRENT_MODE			
++		if (!check_fwstate(&padapter->mlmepriv, _FW_LINKED ))
++		{
++			DBG_8192C("%s, extend ro ch time\n", __func__);
++			_set_timer( &padapter->cfg80211_wdinfo.remain_on_ch_timer, pwdinfo->ext_listen_period);
++		}	
++		#endif //CONFIG_CONCURRENT_MODE			
++	}
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if (check_buddy_fwstate(padapter, _FW_LINKED )) {
++		u8 co_channel=0xff;
++		PADAPTER pbuddy_adapter = padapter->pbuddy_adapter;			
++		struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;	
++
++		co_channel = rtw_get_oper_ch(padapter);
++
++		if (tx_ch != pbuddy_mlmeext->cur_channel) {
++
++			u16 ext_listen_period;
++
++			if (ATOMIC_READ(&pwdev_priv->switch_ch_to)==1) {
++				DBG_8192C("%s, issue nulldata pwrbit=1\n", __func__);
++				issue_nulldata(padapter->pbuddy_adapter, NULL, 1, 3, 500);
++
++				ATOMIC_SET(&pwdev_priv->switch_ch_to, 0);
++
++				//DBG_8192C("%s, set switch ch timer, period=%d\n", __func__, pwdinfo->ext_listen_period);
++				//_set_timer(&pwdinfo->ap_p2p_switch_timer, pwdinfo->ext_listen_period);
++			}
++
++			if (check_fwstate(&padapter->mlmepriv, _FW_LINKED ))
++			{
++				ext_listen_period = 500;// 500ms
++			}	
++			else
++			{				
++				ext_listen_period = pwdinfo->ext_listen_period;
++			}
++
++			DBG_8192C("%s, set switch ch timer, period=%d\n", __func__, ext_listen_period);
++			_set_timer(&pwdinfo->ap_p2p_switch_timer, ext_listen_period);	
++			
++		}
++
++		if (!check_fwstate(&padapter->mlmepriv, _FW_LINKED ))
++			pmlmeext->cur_channel = tx_ch;
++
++		if (tx_ch != co_channel)
++			set_channel_bwmode(padapter, tx_ch, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
++	}else 
++#endif //CONFIG_CONCURRENT_MODE
++	//if (tx_ch != pmlmeext->cur_channel) {
++	if(tx_ch != rtw_get_oper_ch(padapter)) {
++		if (!check_fwstate(&padapter->mlmepriv, _FW_LINKED ))
++			pmlmeext->cur_channel = tx_ch;
++		set_channel_bwmode(padapter, tx_ch, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
++	}
++
++	//starting alloc mgmt frame to dump it
++	if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
++	{
++		//ret = -ENOMEM;
++		ret = _FAIL;
++		goto exit;
++	}
++
++	//update attribute
++	pattrib = &pmgntframe->attrib;
++	update_mgntframe_attrib(padapter, pattrib);
++	pattrib->retry_ctrl = _FALSE;
++
++	_rtw_memset(pmgntframe->buf_addr, 0, WLANHDR_OFFSET + TXDESC_OFFSET);
++
++	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
++
++	_rtw_memcpy(pframe, (void*)buf, len);
++	pattrib->pktlen = len;	
++	
++	pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
++	//update seq number
++	pmlmeext->mgnt_seq = GetSequence(pwlanhdr);
++	pattrib->seqnum = pmlmeext->mgnt_seq;
++	pmlmeext->mgnt_seq++;
++
++#ifdef CONFIG_WFD
++	{
++		struct wifi_display_info	*pwfd_info;
++			
++		pwfd_info = padapter->wdinfo.wfd_info;
++			
++		if ( _TRUE == pwfd_info->wfd_enable )
++		{
++			rtw_append_wfd_ie( padapter, pframe, &pattrib->pktlen );
++		}
++	}
++#endif // CONFIG_WFD
++	
++	pattrib->last_txcmdsz = pattrib->pktlen;
++
++	if (dump_mgntframe_and_wait_ack(padapter, pmgntframe) != _SUCCESS) 
++	{
++		ack = _FALSE;
++		ret = _FAIL;
++
++		#ifdef CONFIG_DEBUG_CFG80211
++		DBG_8192C("%s, ack == _FAIL\n", __func__);
++		#endif
++	}
++	else 
++	{
++		#ifdef CONFIG_DEBUG_CFG80211
++		DBG_8192C("%s, ack=%d, ok!\n", __func__, ack);
++		#endif
++		ret = _SUCCESS;
++	}
++	
++exit:
++
++	#ifdef CONFIG_DEBUG_CFG80211
++	DBG_8192C("%s, ret=%d\n", __func__, ret);
++	#endif
++	
++	return ret;		
++	
++}
++
++static int cfg80211_rtw_mgmt_tx(struct wiphy *wiphy,
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,6,0))
++	struct wireless_dev *wdev,
++#else
++	struct net_device *ndev,
++#endif
++	struct ieee80211_channel *chan,
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)) || defined(COMPAT_KERNEL_RELEASE)
++	bool offchan,
++#endif
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,8,0))
++	enum nl80211_channel_type channel_type,
++	#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE)
++	bool channel_type_valid,
++	#endif
++#endif
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)) || defined(COMPAT_KERNEL_RELEASE)
++	unsigned int wait,
++#endif
++	const u8 *buf, size_t len,
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,0))
++	bool no_cck,
++#endif
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,3,0))
++	bool dont_wait_for_ack,
++#endif
++	u64 *cookie)
++{
++	_adapter *padapter = (_adapter *)wiphy_to_adapter(wiphy);
++	struct rtw_wdev_priv *pwdev_priv = wdev_to_priv(padapter->rtw_wdev);
++	int ret = 0;
++	int tx_ret;
++	u32 dump_limit = RTW_MAX_MGMT_TX_CNT;
++	u32 dump_cnt = 0;
++	bool ack = _TRUE;
++	u8 tx_ch = (u8)ieee80211_frequency_to_channel(chan->center_freq);
++	u8 category, action;
++	int type = (-1);
++	u32 start = rtw_get_current_time();
++
++	/* cookie generation */
++	*cookie = (unsigned long) buf;
++
++#ifdef CONFIG_DEBUG_CFG80211
++	DBG_871X(FUNC_ADPT_FMT" len=%zu, ch=%d"
++	#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,8,0))
++		", ch_type=%d"
++		#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE)	
++		", channel_type_valid=%d"
++		#endif
++	#endif
++		"\n", FUNC_ADPT_ARG(padapter),
++		len, tx_ch
++	#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,8,0))
++		, channel_type
++		#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE)	
++		, channel_type_valid
++		#endif
++	#endif
++	);
++#endif /* CONFIG_DEBUG_CFG80211 */
++
++	/* indicate ack before issue frame to avoid racing with rsp frame */
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE)
++	rtw_cfg80211_mgmt_tx_status(padapter, *cookie, buf, len, ack, GFP_KERNEL);
++#elif  (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,34) && LINUX_VERSION_CODE<=KERNEL_VERSION(2,6,35))
++	cfg80211_action_tx_status(ndev, *cookie, buf, len, ack, GFP_KERNEL);
++#endif
++
++	if (rtw_action_frame_parse(buf, len, &category, &action) == _FALSE) {
++		DBG_8192C(FUNC_ADPT_FMT" frame_control:0x%x\n", FUNC_ADPT_ARG(padapter),
++			le16_to_cpu(((struct rtw_ieee80211_hdr_3addr *)buf)->frame_ctl));
++		goto exit;
++	}
++
++	DBG_8192C("RTW_Tx:tx_ch=%d, da="MAC_FMT"\n", tx_ch, MAC_ARG(GetAddr1Ptr(buf)));
++	#ifdef CONFIG_P2P
++	if((type = rtw_p2p_check_frames(padapter, buf, len, _TRUE)) >= 0) {
++		goto dump;
++	}
++	#endif
++	if (category == RTW_WLAN_CATEGORY_PUBLIC)
++		DBG_871X("RTW_Tx:%s\n", action_public_str(action));
++	else
++		DBG_871X("RTW_Tx:category(%u), action(%u)\n", category, action);
++
++dump:
++	do {
++		dump_cnt++;
++		tx_ret = _cfg80211_rtw_mgmt_tx(padapter, tx_ch, buf, len);
++	} while (dump_cnt < dump_limit && tx_ret != _SUCCESS);
++
++	if (tx_ret != _SUCCESS || dump_cnt > 1) {
++		DBG_871X(FUNC_ADPT_FMT" %s (%d/%d) in %d ms\n", FUNC_ADPT_ARG(padapter),
++			tx_ret==_SUCCESS?"OK":"FAIL", dump_cnt, dump_limit, rtw_get_passing_time_ms(start));
++	}
++
++	switch (type) {
++	case P2P_GO_NEGO_CONF:
++		rtw_clear_scan_deny(padapter);
++		break;
++	case P2P_INVIT_RESP:
++		if (pwdev_priv->invit_info.flags & BIT(0)
++			&& pwdev_priv->invit_info.status == 0) 
++		{
++			DBG_871X(FUNC_ADPT_FMT" agree with invitation of persistent group\n",
++				FUNC_ADPT_ARG(padapter));
++			rtw_set_scan_deny(padapter, 5000);
++			rtw_pwr_wakeup_ex(padapter, 5000);
++			rtw_clear_scan_deny(padapter);
++		}
++		break;
++	}	
++
++exit:
++	return ret;
++}
++
++static void cfg80211_rtw_mgmt_frame_register(struct wiphy *wiphy,
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 6, 0))
++	struct wireless_dev *wdev,
++#else
++	struct net_device *ndev,
++#endif
++	u16 frame_type, bool reg)
++{
++	_adapter *adapter = wiphy_to_adapter(wiphy);
++
++#ifdef CONFIG_DEBUG_CFG80211
++	DBG_871X(FUNC_ADPT_FMT" frame_type:%x, reg:%d\n", FUNC_ADPT_ARG(adapter),
++		frame_type, reg);
++#endif
++
++	if (frame_type != (IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_REQ))
++		return;
++
++	return;
++}
++
++static int rtw_cfg80211_set_beacon_wpsp2pie(struct net_device *ndev, char *buf, int len)
++{	
++	int ret = 0;
++	uint wps_ielen = 0;
++	u8 *wps_ie;
++	u32	p2p_ielen = 0;
++	u8 wps_oui[8]={0x0,0x50,0xf2,0x04};	
++	u8 *p2p_ie;
++	u32	wfd_ielen = 0;	
++	u8 *wfd_ie;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(ndev);
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv);
++
++	DBG_871X(FUNC_NDEV_FMT" ielen=%d\n", FUNC_NDEV_ARG(ndev), len);
++	
++	if(len>0)
++	{
++		if((wps_ie = rtw_get_wps_ie(buf, len, NULL, &wps_ielen)))
++		{	
++			#ifdef CONFIG_DEBUG_CFG80211
++			DBG_8192C("bcn_wps_ielen=%d\n", wps_ielen);
++			#endif
++		
++			if(pmlmepriv->wps_beacon_ie)
++			{
++				u32 free_len = pmlmepriv->wps_beacon_ie_len;
++				pmlmepriv->wps_beacon_ie_len = 0;
++				rtw_mfree(pmlmepriv->wps_beacon_ie, free_len);
++				pmlmepriv->wps_beacon_ie = NULL;			
++			}	
++
++			pmlmepriv->wps_beacon_ie = rtw_malloc(wps_ielen);
++			if ( pmlmepriv->wps_beacon_ie == NULL) {
++				DBG_8192C("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__);
++				return -EINVAL;
++			
++			}
++			
++			_rtw_memcpy(pmlmepriv->wps_beacon_ie, wps_ie, wps_ielen);
++			pmlmepriv->wps_beacon_ie_len = wps_ielen;
++	
++			update_beacon(padapter, _VENDOR_SPECIFIC_IE_, wps_oui, _TRUE);
++
++		}
++
++		//buf += wps_ielen;
++		//len -= wps_ielen;
++
++		#ifdef CONFIG_P2P
++		if((p2p_ie=rtw_get_p2p_ie(buf, len, NULL, &p2p_ielen)))
++		{
++			#ifdef CONFIG_DEBUG_CFG80211
++			DBG_8192C("bcn_p2p_ielen=%d\n", p2p_ielen);
++			#endif
++		
++			if(pmlmepriv->p2p_beacon_ie)
++			{
++				u32 free_len = pmlmepriv->p2p_beacon_ie_len;
++				pmlmepriv->p2p_beacon_ie_len = 0;
++				rtw_mfree(pmlmepriv->p2p_beacon_ie, free_len);
++				pmlmepriv->p2p_beacon_ie = NULL;			
++			}	
++
++			pmlmepriv->p2p_beacon_ie = rtw_malloc(p2p_ielen);
++			if ( pmlmepriv->p2p_beacon_ie == NULL) {
++				DBG_8192C("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__);
++				return -EINVAL;
++			
++			}
++			
++			_rtw_memcpy(pmlmepriv->p2p_beacon_ie, p2p_ie, p2p_ielen);
++			pmlmepriv->p2p_beacon_ie_len = p2p_ielen;
++			
++		}
++		#endif //CONFIG_P2P
++		
++		//buf += p2p_ielen;
++		//len -= p2p_ielen;
++
++		#ifdef CONFIG_WFD
++		if(rtw_get_wfd_ie(buf, len, NULL, &wfd_ielen)) 
++		{
++			#ifdef CONFIG_DEBUG_CFG80211
++			DBG_8192C("bcn_wfd_ielen=%d\n", wfd_ielen);
++			#endif
++			
++			if(pmlmepriv->wfd_beacon_ie)
++			{
++				u32 free_len = pmlmepriv->wfd_beacon_ie_len;
++				pmlmepriv->wfd_beacon_ie_len = 0;
++				rtw_mfree(pmlmepriv->wfd_beacon_ie, free_len);
++				pmlmepriv->wfd_beacon_ie = NULL;
++			}	
++
++			pmlmepriv->wfd_beacon_ie = rtw_malloc(wfd_ielen);
++			if ( pmlmepriv->wfd_beacon_ie == NULL) {
++				DBG_8192C("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__);
++				return -EINVAL;
++			
++			}
++			rtw_get_wfd_ie(buf, len, pmlmepriv->wfd_beacon_ie, &pmlmepriv->wfd_beacon_ie_len);			
++		}
++		#endif //CONFIG_WFD
++		
++		pmlmeext->bstart_bss = _TRUE;
++		
++	}
++
++	return ret;
++	
++}
++
++static int rtw_cfg80211_set_probe_resp_wpsp2pie(struct net_device *net, char *buf, int len)
++{
++	int ret = 0;
++	uint wps_ielen = 0;
++	u8 *wps_ie;
++	u32	p2p_ielen = 0;	
++	u8 *p2p_ie;
++	u32	wfd_ielen = 0;	
++	u8 *wfd_ie;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(net);
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);	
++
++#ifdef CONFIG_DEBUG_CFG80211
++	DBG_8192C("%s, ielen=%d\n", __func__, len);
++#endif
++	
++	if(len>0)
++	{
++		if((wps_ie = rtw_get_wps_ie(buf, len, NULL, &wps_ielen)))
++		{	
++			uint	attr_contentlen = 0;
++			u16	uconfig_method, *puconfig_method = NULL;
++
++			#ifdef CONFIG_DEBUG_CFG80211			
++			DBG_8192C("probe_resp_wps_ielen=%d\n", wps_ielen);
++			#endif
++
++			if(check_fwstate(pmlmepriv, WIFI_UNDER_WPS))
++			{
++				u8 sr = 0;
++				rtw_get_wps_attr_content(wps_ie,  wps_ielen, WPS_ATTR_SELECTED_REGISTRAR, (u8*)(&sr), NULL);
++
++				if (sr != 0)
++				{
++					DBG_871X("%s, got sr\n", __func__);
++				}
++				else
++				{
++					DBG_8192C("GO mode process WPS under site-survey,  sr no set\n");
++					return ret;
++				}
++			}
++
++			if(pmlmepriv->wps_probe_resp_ie)
++			{
++				u32 free_len = pmlmepriv->wps_probe_resp_ie_len;
++				pmlmepriv->wps_probe_resp_ie_len = 0;
++				rtw_mfree(pmlmepriv->wps_probe_resp_ie, free_len);
++				pmlmepriv->wps_probe_resp_ie = NULL;			
++			}	
++
++			pmlmepriv->wps_probe_resp_ie = rtw_malloc(wps_ielen);
++			if ( pmlmepriv->wps_probe_resp_ie == NULL) {
++				DBG_8192C("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__);
++				return -EINVAL;
++			
++			}
++			
++			//add PUSH_BUTTON config_method by driver self in wpsie of probe_resp at GO Mode 
++			if ( (puconfig_method = (u16*)rtw_get_wps_attr_content( wps_ie, wps_ielen, WPS_ATTR_CONF_METHOD , NULL, &attr_contentlen)) != NULL )
++			{
++				#ifdef CONFIG_DEBUG_CFG80211		
++				//printk("config_method in wpsie of probe_resp = 0x%x\n", be16_to_cpu(*puconfig_method));
++				#endif
++				
++				uconfig_method = WPS_CM_PUSH_BUTTON;
++				uconfig_method = cpu_to_be16( uconfig_method );
++
++				*puconfig_method |= uconfig_method;			
++			}
++			
++			_rtw_memcpy(pmlmepriv->wps_probe_resp_ie, wps_ie, wps_ielen);
++			pmlmepriv->wps_probe_resp_ie_len = wps_ielen;
++			
++		}
++
++		//buf += wps_ielen;
++		//len -= wps_ielen;
++
++		#ifdef CONFIG_P2P
++		if((p2p_ie=rtw_get_p2p_ie(buf, len, NULL, &p2p_ielen))) 
++		{
++			u8 is_GO = _FALSE;			
++			u32 attr_contentlen = 0;
++			u16 cap_attr=0;
++
++			#ifdef CONFIG_DEBUG_CFG80211
++			DBG_8192C("probe_resp_p2p_ielen=%d\n", p2p_ielen);
++			#endif			
++
++			//Check P2P Capability ATTR
++			if( rtw_get_p2p_attr_content( p2p_ie, p2p_ielen, P2P_ATTR_CAPABILITY, (u8*)&cap_attr, (uint*) &attr_contentlen) )
++			{
++				u8 grp_cap=0;
++				//DBG_8192C( "[%s] Got P2P Capability Attr!!\n", __FUNCTION__ );
++				cap_attr = le16_to_cpu(cap_attr);
++				grp_cap = (u8)((cap_attr >> 8)&0xff);
++				
++				is_GO = (grp_cap&BIT(0)) ? _TRUE:_FALSE;
++
++				if(is_GO)
++					DBG_8192C("Got P2P Capability Attr, grp_cap=0x%x, is_GO\n", grp_cap);
++			}
++
++
++			if(is_GO == _FALSE)
++			{
++				if(pmlmepriv->p2p_probe_resp_ie)
++				{
++					u32 free_len = pmlmepriv->p2p_probe_resp_ie_len;
++					pmlmepriv->p2p_probe_resp_ie_len = 0;
++					rtw_mfree(pmlmepriv->p2p_probe_resp_ie, free_len);
++					pmlmepriv->p2p_probe_resp_ie = NULL;		
++				}	
++
++				pmlmepriv->p2p_probe_resp_ie = rtw_malloc(p2p_ielen);
++				if ( pmlmepriv->p2p_probe_resp_ie == NULL) {
++					DBG_8192C("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__);
++					return -EINVAL;
++				
++				}
++				_rtw_memcpy(pmlmepriv->p2p_probe_resp_ie, p2p_ie, p2p_ielen);
++				pmlmepriv->p2p_probe_resp_ie_len = p2p_ielen;
++			}		
++			else
++			{
++				if(pmlmepriv->p2p_go_probe_resp_ie)
++				{
++					u32 free_len = pmlmepriv->p2p_go_probe_resp_ie_len;
++					pmlmepriv->p2p_go_probe_resp_ie_len = 0;
++					rtw_mfree(pmlmepriv->p2p_go_probe_resp_ie, free_len);
++					pmlmepriv->p2p_go_probe_resp_ie = NULL;			
++				}	
++
++				pmlmepriv->p2p_go_probe_resp_ie = rtw_malloc(p2p_ielen);
++				if ( pmlmepriv->p2p_go_probe_resp_ie == NULL) {
++					DBG_8192C("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__);
++					return -EINVAL;
++			
++				}
++				_rtw_memcpy(pmlmepriv->p2p_go_probe_resp_ie, p2p_ie, p2p_ielen);
++				pmlmepriv->p2p_go_probe_resp_ie_len = p2p_ielen;
++			}
++			
++		}
++		#endif //CONFIG_P2P
++		
++		//buf += p2p_ielen;
++		//len -= p2p_ielen;
++
++		#ifdef CONFIG_WFD
++		if(rtw_get_wfd_ie(buf, len, NULL, &wfd_ielen)) 
++		{
++			#ifdef CONFIG_DEBUG_CFG80211
++			DBG_8192C("probe_resp_wfd_ielen=%d\n", wfd_ielen);
++			#endif
++			
++			if(pmlmepriv->wfd_probe_resp_ie)
++			{
++				u32 free_len = pmlmepriv->wfd_probe_resp_ie_len;
++				pmlmepriv->wfd_probe_resp_ie_len = 0;
++				rtw_mfree(pmlmepriv->wfd_probe_resp_ie, free_len);
++				pmlmepriv->wfd_probe_resp_ie = NULL;
++			}	
++
++			pmlmepriv->wfd_probe_resp_ie = rtw_malloc(wfd_ielen);
++			if ( pmlmepriv->wfd_probe_resp_ie == NULL) {
++				DBG_8192C("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__);
++				return -EINVAL;
++			
++			}
++			rtw_get_wfd_ie(buf, len, pmlmepriv->wfd_probe_resp_ie, &pmlmepriv->wfd_probe_resp_ie_len);			
++		}
++		#endif //CONFIG_WFD
++		
++	}
++
++	return ret;
++	
++}
++
++static int rtw_cfg80211_set_assoc_resp_wpsp2pie(struct net_device *net, char *buf, int len)
++{
++	int ret = 0;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(net);
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++
++	DBG_8192C("%s, ielen=%d\n", __func__, len);
++	
++	if(len>0)
++	{
++		if(pmlmepriv->wps_assoc_resp_ie)
++		{
++			u32 free_len = pmlmepriv->wps_assoc_resp_ie_len;
++			pmlmepriv->wps_assoc_resp_ie_len = 0;
++			rtw_mfree(pmlmepriv->wps_assoc_resp_ie, free_len);
++			pmlmepriv->wps_assoc_resp_ie = NULL;
++		}	
++
++		pmlmepriv->wps_assoc_resp_ie = rtw_malloc(len);
++		if ( pmlmepriv->wps_assoc_resp_ie == NULL) {
++			DBG_8192C("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__);
++			return -EINVAL;
++			
++		}
++		_rtw_memcpy(pmlmepriv->wps_assoc_resp_ie, buf, len);
++		pmlmepriv->wps_assoc_resp_ie_len = len;
++	}
++
++	return ret;
++	
++}
++
++int rtw_cfg80211_set_mgnt_wpsp2pie(struct net_device *net, char *buf, int len,
++	int type)
++{
++	int ret = 0;
++	uint wps_ielen = 0;
++	u32	p2p_ielen = 0;
++
++#ifdef CONFIG_DEBUG_CFG80211
++	DBG_8192C("%s, ielen=%d\n", __func__, len);
++#endif
++
++	if(	(rtw_get_wps_ie(buf, len, NULL, &wps_ielen) && (wps_ielen>0))
++		#ifdef CONFIG_P2P
++		|| (rtw_get_p2p_ie(buf, len, NULL, &p2p_ielen) && (p2p_ielen>0))
++		#endif
++	)		
++	{	
++		if (net != NULL) 
++		{
++			switch (type) 
++			{
++				case 0x1: //BEACON
++				ret = rtw_cfg80211_set_beacon_wpsp2pie(net, buf, len);
++				break;
++				case 0x2: //PROBE_RESP
++				ret = rtw_cfg80211_set_probe_resp_wpsp2pie(net, buf, len);
++				break;
++				case 0x4: //ASSOC_RESP
++				ret = rtw_cfg80211_set_assoc_resp_wpsp2pie(net, buf, len);
++				break;
++			}		
++		}
++	}	
++
++	return ret;
++	
++}
++
++static struct cfg80211_ops rtw_cfg80211_ops = {
++	.change_virtual_intf = cfg80211_rtw_change_iface,
++	.add_key = cfg80211_rtw_add_key,
++	.get_key = cfg80211_rtw_get_key,
++	.del_key = cfg80211_rtw_del_key,
++	.set_default_key = cfg80211_rtw_set_default_key,
++	.get_station = cfg80211_rtw_get_station,
++	.scan = cfg80211_rtw_scan,
++	.set_wiphy_params = cfg80211_rtw_set_wiphy_params,
++	.connect = cfg80211_rtw_connect,
++	.disconnect = cfg80211_rtw_disconnect,
++	.join_ibss = cfg80211_rtw_join_ibss,
++	.leave_ibss = cfg80211_rtw_leave_ibss,
++	.set_tx_power = cfg80211_rtw_set_txpower,
++	.get_tx_power = cfg80211_rtw_get_txpower,
++	.set_power_mgmt = cfg80211_rtw_set_power_mgmt,
++	.set_pmksa = cfg80211_rtw_set_pmksa,
++	.del_pmksa = cfg80211_rtw_del_pmksa,
++	.flush_pmksa = cfg80211_rtw_flush_pmksa,
++	
++#ifdef CONFIG_AP_MODE
++	.add_virtual_intf = cfg80211_rtw_add_virtual_intf,
++	.del_virtual_intf = cfg80211_rtw_del_virtual_intf,
++
++	#if (LINUX_VERSION_CODE < KERNEL_VERSION(3, 4, 0)) && !defined(COMPAT_KERNEL_RELEASE)
++	.add_beacon = cfg80211_rtw_add_beacon,
++	.set_beacon = cfg80211_rtw_set_beacon,
++	.del_beacon = cfg80211_rtw_del_beacon,
++	#else
++	.start_ap = cfg80211_rtw_start_ap,
++	.change_beacon = cfg80211_rtw_change_beacon,
++	.stop_ap = cfg80211_rtw_stop_ap,
++	#endif
++	
++	.add_station = cfg80211_rtw_add_station,
++	.del_station = cfg80211_rtw_del_station,
++	.change_station = cfg80211_rtw_change_station,
++	.dump_station = cfg80211_rtw_dump_station,
++	.change_bss = cfg80211_rtw_change_bss,
++	#if (LINUX_VERSION_CODE < KERNEL_VERSION(3, 6, 0))
++	.set_channel = cfg80211_rtw_set_channel,
++	#endif
++	//.auth = cfg80211_rtw_auth,
++	//.assoc = cfg80211_rtw_assoc,	
++#endif //CONFIG_AP_MODE
++
++#ifdef CONFIG_P2P
++	.remain_on_channel = cfg80211_rtw_remain_on_channel,
++	.cancel_remain_on_channel = cfg80211_rtw_cancel_remain_on_channel,
++#endif
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE)	 
++	.mgmt_tx = cfg80211_rtw_mgmt_tx,
++	.mgmt_frame_register = cfg80211_rtw_mgmt_frame_register,
++#elif  (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,34) && LINUX_VERSION_CODE<=KERNEL_VERSION(2,6,35))
++	.action = cfg80211_rtw_mgmt_tx,
++#endif
++};
++
++static void rtw_cfg80211_init_ht_capab(struct ieee80211_sta_ht_cap *ht_cap, enum ieee80211_band band, u8 rf_type)
++{
++
++#define MAX_BIT_RATE_40MHZ_MCS15 	300	/* Mbps */
++#define MAX_BIT_RATE_40MHZ_MCS7 	150	/* Mbps */
++
++	ht_cap->ht_supported = _TRUE;
++
++	ht_cap->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
++	    				IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_SGI_20 |
++	    				IEEE80211_HT_CAP_DSSSCCK40 | IEEE80211_HT_CAP_MAX_AMSDU;
++
++	/*
++	 *Maximum length of AMPDU that the STA can receive.
++	 *Length = 2 ^ (13 + max_ampdu_length_exp) - 1 (octets)
++	 */
++	ht_cap->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
++
++	/*Minimum MPDU start spacing , */
++	ht_cap->ampdu_density = IEEE80211_HT_MPDU_DENSITY_16;
++
++	ht_cap->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
++
++	/*
++	 *hw->wiphy->bands[IEEE80211_BAND_2GHZ]
++	 *base on ant_num
++	 *rx_mask: RX mask
++	 *if rx_ant =1 rx_mask[0]=0xff;==>MCS0-MCS7
++	 *if rx_ant =2 rx_mask[1]=0xff;==>MCS8-MCS15
++	 *if rx_ant >=3 rx_mask[2]=0xff;
++	 *if BW_40 rx_mask[4]=0x01;
++	 *highest supported RX rate
++	 */
++	if(rf_type == RF_1T1R)
++	{
++		ht_cap->mcs.rx_mask[0] = 0xFF;
++		ht_cap->mcs.rx_mask[1] = 0x00;
++		ht_cap->mcs.rx_mask[4] = 0x01;
++
++		ht_cap->mcs.rx_highest = MAX_BIT_RATE_40MHZ_MCS7;
++	}
++	else if((rf_type == RF_1T2R) || (rf_type==RF_2T2R))
++	{
++		ht_cap->mcs.rx_mask[0] = 0xFF;
++		ht_cap->mcs.rx_mask[1] = 0xFF;
++		ht_cap->mcs.rx_mask[4] = 0x01;
++
++		ht_cap->mcs.rx_highest = MAX_BIT_RATE_40MHZ_MCS15;
++	}
++	else
++	{
++		DBG_8192C("%s, error rf_type=%d\n", __func__, rf_type);
++	}	
++	
++}
++
++void rtw_cfg80211_init_wiphy(_adapter *padapter)
++{
++	u8 rf_type;
++	struct ieee80211_supported_band *bands;
++	struct wireless_dev *pwdev = padapter->rtw_wdev;
++	struct wiphy *wiphy = pwdev->wiphy;
++	
++	rtw_hal_get_hwreg(padapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type));
++
++	DBG_8192C("%s:rf_type=%d\n", __func__, rf_type);
++
++	/* if (padapter->registrypriv.wireless_mode & WIRELESS_11G) */
++	{
++		bands = wiphy->bands[IEEE80211_BAND_2GHZ];
++		if(bands)
++			rtw_cfg80211_init_ht_capab(&bands->ht_cap, IEEE80211_BAND_2GHZ, rf_type);
++	}
++
++	/* if (padapter->registrypriv.wireless_mode & WIRELESS_11A) */
++	{
++		bands = wiphy->bands[IEEE80211_BAND_5GHZ];
++		if(bands)
++			rtw_cfg80211_init_ht_capab(&bands->ht_cap, IEEE80211_BAND_5GHZ, rf_type);
++	}
++}
++
++/*
++struct ieee80211_iface_limit rtw_limits[] = {
++	{ .max = 1, .types = BIT(NL80211_IFTYPE_STATION)
++					| BIT(NL80211_IFTYPE_ADHOC)
++#ifdef CONFIG_AP_MODE
++					| BIT(NL80211_IFTYPE_AP)
++#endif
++#if defined(CONFIG_P2P) && ((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE))
++					| BIT(NL80211_IFTYPE_P2P_CLIENT)
++					| BIT(NL80211_IFTYPE_P2P_GO)
++#endif
++	},
++	{.max = 1, .types = BIT(NL80211_IFTYPE_MONITOR)},
++};
++
++struct ieee80211_iface_combination rtw_combinations = {
++	.limits = rtw_limits,
++	.n_limits = ARRAY_SIZE(rtw_limits),
++	.max_interfaces = 2,
++	.num_different_channels = 1,
++};
++*/
++
++static void rtw_cfg80211_preinit_wiphy(_adapter *padapter, struct wiphy *wiphy)
++{
++
++	wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
++
++	wiphy->max_scan_ssids = RTW_SSID_SCAN_AMOUNT;
++	wiphy->max_scan_ie_len = RTW_SCAN_IE_LEN_MAX;	
++	wiphy->max_num_pmkids = RTW_MAX_NUM_PMKIDS;
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)) || defined(COMPAT_KERNEL_RELEASE)	 
++	wiphy->max_remain_on_channel_duration = RTW_MAX_REMAIN_ON_CHANNEL_DURATION;
++#endif
++	
++	wiphy->interface_modes =	BIT(NL80211_IFTYPE_STATION)
++								| BIT(NL80211_IFTYPE_ADHOC)
++#ifdef CONFIG_AP_MODE
++								| BIT(NL80211_IFTYPE_AP)
++								| BIT(NL80211_IFTYPE_MONITOR)
++#endif
++#if defined(CONFIG_P2P) && ((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE))
++								| BIT(NL80211_IFTYPE_P2P_CLIENT)
++								| BIT(NL80211_IFTYPE_P2P_GO)
++#endif
++								;
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE)	
++#ifdef CONFIG_AP_MODE
++	wiphy->mgmt_stypes = rtw_cfg80211_default_mgmt_stypes;
++#endif //CONFIG_AP_MODE	
++#endif		
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,0,0))
++	wiphy->software_iftypes |= BIT(NL80211_IFTYPE_MONITOR);
++#endif
++
++	/*
++	wiphy->iface_combinations = &rtw_combinations;
++	wiphy->n_iface_combinations = 1;
++	*/
++
++	wiphy->cipher_suites = rtw_cipher_suites;
++	wiphy->n_cipher_suites = ARRAY_SIZE(rtw_cipher_suites);
++
++	/* if (padapter->registrypriv.wireless_mode & WIRELESS_11G) */
++		wiphy->bands[IEEE80211_BAND_2GHZ] = rtw_spt_band_alloc(IEEE80211_BAND_2GHZ);
++	/* if (padapter->registrypriv.wireless_mode & WIRELESS_11A) */
++		wiphy->bands[IEEE80211_BAND_5GHZ] = rtw_spt_band_alloc(IEEE80211_BAND_5GHZ);
++	
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38) && LINUX_VERSION_CODE < KERNEL_VERSION(3,0,0))
++	wiphy->flags |= WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS;
++#endif
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,3,0))
++	wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
++	wiphy->flags |= WIPHY_FLAG_OFFCHAN_TX | WIPHY_FLAG_HAVE_AP_SME;
++#endif
++
++	if(padapter->registrypriv.power_mgnt != PS_MODE_ACTIVE)
++		wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT;
++	else 
++		wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
++}
++
++int rtw_wdev_alloc(_adapter *padapter, struct device *dev)
++{
++	int ret = 0;
++	struct wiphy *wiphy;
++	struct wireless_dev *wdev;
++	struct rtw_wdev_priv *pwdev_priv;
++	struct net_device *pnetdev = padapter->pnetdev;
++	
++	DBG_8192C("%s(padapter=%p)\n", __func__, padapter);
++
++	/* wiphy */
++	wiphy = wiphy_new(&rtw_cfg80211_ops, sizeof(struct rtw_wdev_priv));
++	if (!wiphy) {
++		DBG_8192C("Couldn't allocate wiphy device\n");
++		ret = -ENOMEM;
++		goto exit;
++	}
++	set_wiphy_dev(wiphy, dev);
++	rtw_cfg80211_preinit_wiphy(padapter, wiphy);
++
++	ret = wiphy_register(wiphy);
++	if (ret < 0) {
++		DBG_8192C("Couldn't register wiphy device\n");
++		goto free_wiphy;
++	}
++
++	/*  wdev */
++	wdev = (struct wireless_dev *)rtw_zmalloc(sizeof(struct wireless_dev));
++	if (!wdev) {
++		DBG_8192C("Couldn't allocate wireless device\n");
++		ret = -ENOMEM;
++		goto unregister_wiphy;
++	}
++	wdev->wiphy = wiphy;
++	wdev->netdev = pnetdev;
++	//wdev->iftype = NL80211_IFTYPE_STATION;
++	wdev->iftype = NL80211_IFTYPE_MONITOR; // for rtw_setopmode_cmd() in cfg80211_rtw_change_iface()
++	padapter->rtw_wdev = wdev;
++	pnetdev->ieee80211_ptr = wdev;
++
++	//init pwdev_priv
++	pwdev_priv = wdev_to_priv(wdev);
++	pwdev_priv->rtw_wdev = wdev;
++	pwdev_priv->pmon_ndev = NULL;
++	pwdev_priv->ifname_mon[0] = '\0';
++	pwdev_priv->padapter = padapter;
++	pwdev_priv->scan_request = NULL;
++	_rtw_spinlock_init(&pwdev_priv->scan_req_lock);
++		
++	pwdev_priv->p2p_enabled = _FALSE;
++	pwdev_priv->provdisc_req_issued = _FALSE;
++	rtw_wdev_invit_info_init(&pwdev_priv->invit_info);
++	rtw_wdev_nego_info_init(&pwdev_priv->nego_info);
++		
++	pwdev_priv->bandroid_scan = _FALSE;
++
++	if(padapter->registrypriv.power_mgnt != PS_MODE_ACTIVE)
++		pwdev_priv->power_mgmt = _TRUE;
++	else
++		pwdev_priv->power_mgmt = _FALSE;
++	
++#ifdef CONFIG_CONCURRENT_MODE
++	ATOMIC_SET(&pwdev_priv->switch_ch_to, 1);	
++	ATOMIC_SET(&pwdev_priv->ro_ch_to, 1);	
++#endif
++
++	return ret;
++
++	rtw_mfree((u8*)wdev, sizeof(struct wireless_dev));
++unregister_wiphy:
++	wiphy_unregister(wiphy);
++ free_wiphy:
++ 	wiphy_free(wiphy);
++exit:
++	return ret;
++	
++}
++
++void rtw_wdev_free(struct wireless_dev *wdev)
++{
++	struct rtw_wdev_priv *pwdev_priv;
++
++	DBG_8192C("%s(wdev=%p)\n", __func__, wdev);
++
++	if (!wdev)
++		return;
++
++	pwdev_priv = wdev_to_priv(wdev);
++
++	rtw_spt_band_free(wdev->wiphy->bands[IEEE80211_BAND_2GHZ]);
++	rtw_spt_band_free(wdev->wiphy->bands[IEEE80211_BAND_5GHZ]);
++	
++	wiphy_free(wdev->wiphy);
++
++	rtw_mfree((u8*)wdev, sizeof(struct wireless_dev));
++}
++
++void rtw_wdev_unregister(struct wireless_dev *wdev)
++{
++	struct rtw_wdev_priv *pwdev_priv;
++
++	DBG_8192C("%s(wdev=%p)\n", __func__, wdev);
++
++	if (!wdev)
++		return;
++
++	pwdev_priv = wdev_to_priv(wdev);
++
++	rtw_cfg80211_indicate_scan_done(pwdev_priv, _TRUE);
++
++	if (pwdev_priv->pmon_ndev) {
++		DBG_8192C("%s, unregister monitor interface\n", __func__);
++		unregister_netdev(pwdev_priv->pmon_ndev);
++	}
++
++	wiphy_unregister(wdev->wiphy);
++}
++
++#endif //CONFIG_IOCTL_CFG80211
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/os_dep/linux/ioctl_linux.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/os_dep/linux/ioctl_linux.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/os_dep/linux/ioctl_linux.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/os_dep/linux/ioctl_linux.c	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,11909 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define  _IOCTL_LINUX_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <wlan_bssdef.h>
++#include <rtw_debug.h>
++#include <wifi.h>
++#include <rtw_mlme.h>
++#include <rtw_mlme_ext.h>
++#include <rtw_ioctl.h>
++#include <rtw_ioctl_set.h>
++#include <rtw_ioctl_query.h>
++
++//#ifdef CONFIG_MP_INCLUDED
++#include <rtw_mp_ioctl.h>
++//#endif
++
++#ifdef CONFIG_USB_HCI
++#include <usb_ops.h>
++#endif //CONFIG_USB_HCI
++#include <rtw_version.h>
++
++#ifdef CONFIG_MP_INCLUDED
++#include <rtw_mp.h>
++#endif
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27))
++#define  iwe_stream_add_event(a, b, c, d, e)  iwe_stream_add_event(b, c, d, e)
++#define  iwe_stream_add_point(a, b, c, d, e)  iwe_stream_add_point(b, c, d, e)
++#endif
++
++
++#define RTL_IOCTL_WPA_SUPPLICANT	SIOCIWFIRSTPRIV+30
++
++#define SCAN_ITEM_SIZE 768
++#define MAX_CUSTOM_LEN 64
++#define RATE_COUNT 4
++
++#ifdef CONFIG_GLOBAL_UI_PID
++extern int ui_pid[3];
++#endif
++
++// combo scan
++#define WEXT_CSCAN_AMOUNT 9
++#define WEXT_CSCAN_BUF_LEN		360
++#define WEXT_CSCAN_HEADER		"CSCAN S\x01\x00\x00S\x00"
++#define WEXT_CSCAN_HEADER_SIZE		12
++#define WEXT_CSCAN_SSID_SECTION		'S'
++#define WEXT_CSCAN_CHANNEL_SECTION	'C'
++#define WEXT_CSCAN_NPROBE_SECTION	'N'
++#define WEXT_CSCAN_ACTV_DWELL_SECTION	'A'
++#define WEXT_CSCAN_PASV_DWELL_SECTION	'P'
++#define WEXT_CSCAN_HOME_DWELL_SECTION	'H'
++#define WEXT_CSCAN_TYPE_SECTION		'T'
++
++
++extern u8 key_2char2num(u8 hch, u8 lch);
++extern u8 str_2char2num(u8 hch, u8 lch);
++extern u8 convert_ip_addr(u8 hch, u8 mch, u8 lch);
++
++u32 rtw_rates[] = {1000000,2000000,5500000,11000000,
++	6000000,9000000,12000000,18000000,24000000,36000000,48000000,54000000};
++
++static const char * const iw_operation_mode[] = 
++{ 
++	"Auto", "Ad-Hoc", "Managed",  "Master", "Repeater", "Secondary", "Monitor" 
++};
++
++static int hex2num_i(char c)
++{
++	if (c >= '0' && c <= '9')
++		return c - '0';
++	if (c >= 'a' && c <= 'f')
++		return c - 'a' + 10;
++	if (c >= 'A' && c <= 'F')
++		return c - 'A' + 10;
++	return -1;
++}
++
++static int hex2byte_i(const char *hex)
++{
++	int a, b;
++	a = hex2num_i(*hex++);
++	if (a < 0)
++		return -1;
++	b = hex2num_i(*hex++);
++	if (b < 0)
++		return -1;
++	return (a << 4) | b;
++}
++
++/**
++ * hwaddr_aton - Convert ASCII string to MAC address
++ * @txt: MAC address as a string (e.g., "00:11:22:33:44:55")
++ * @addr: Buffer for the MAC address (ETH_ALEN = 6 bytes)
++ * Returns: 0 on success, -1 on failure (e.g., string not a MAC address)
++ */
++static int hwaddr_aton_i(const char *txt, u8 *addr)
++{
++	int i;
++
++	for (i = 0; i < 6; i++) {
++		int a, b;
++
++		a = hex2num_i(*txt++);
++		if (a < 0)
++			return -1;
++		b = hex2num_i(*txt++);
++		if (b < 0)
++			return -1;
++		*addr++ = (a << 4) | b;
++		if (i < 5 && *txt++ != ':')
++			return -1;
++	}
++
++	return 0;
++}
++
++static void indicate_wx_custom_event(_adapter *padapter, char *msg)
++{
++#ifndef CONFIG_IOCTL_CFG80211
++	u8 *buff, *p;
++	union iwreq_data wrqu;
++
++	if ((u32)strlen(msg) > IW_CUSTOM_MAX) {
++		DBG_871X("%s strlen(msg):%u > IW_CUSTOM_MAX:%u\n", __FUNCTION__ ,(u32)strlen(msg), IW_CUSTOM_MAX);
++		return;
++	}
++
++	buff = rtw_zmalloc(IW_CUSTOM_MAX+1);
++	if(!buff)
++		return;
++
++	_rtw_memcpy(buff, msg, strlen(msg));
++
++	_rtw_memset(&wrqu,0,sizeof(wrqu));
++	wrqu.data.length = strlen(msg);
++
++	DBG_871X("%s %s\n", __FUNCTION__, buff);
++	wireless_send_event(padapter->pnetdev, IWEVCUSTOM, &wrqu, buff);
++
++	rtw_mfree(buff, IW_CUSTOM_MAX+1);
++#endif
++}
++
++
++static void request_wps_pbc_event(_adapter *padapter)
++{
++#ifndef CONFIG_IOCTL_CFG80211
++	u8 *buff, *p;
++	union iwreq_data wrqu;
++
++	buff = rtw_malloc(IW_CUSTOM_MAX);
++	if(!buff)
++		return;
++
++	_rtw_memset(buff, 0, IW_CUSTOM_MAX);
++
++	p=buff;
++
++	p+=sprintf(p, "WPS_PBC_START.request=TRUE");
++
++	_rtw_memset(&wrqu,0,sizeof(wrqu));
++
++	wrqu.data.length = p-buff;
++
++	wrqu.data.length = (wrqu.data.length<IW_CUSTOM_MAX) ? wrqu.data.length:IW_CUSTOM_MAX;
++
++	DBG_871X("%s\n", __FUNCTION__);
++
++	wireless_send_event(padapter->pnetdev, IWEVCUSTOM, &wrqu, buff);
++
++	if(buff)
++	{
++		rtw_mfree(buff, IW_CUSTOM_MAX);
++	}
++#endif
++}
++
++
++void indicate_wx_scan_complete_event(_adapter *padapter)
++{
++#ifndef CONFIG_IOCTL_CFG80211
++	union iwreq_data wrqu;
++	struct	mlme_priv *pmlmepriv = &padapter->mlmepriv;
++
++	_rtw_memset(&wrqu, 0, sizeof(union iwreq_data));
++
++	//DBG_871X("+rtw_indicate_wx_scan_complete_event\n");
++	wireless_send_event(padapter->pnetdev, SIOCGIWSCAN, &wrqu, NULL);
++#endif
++}
++
++
++void rtw_indicate_wx_assoc_event(_adapter *padapter)
++{
++#ifndef CONFIG_IOCTL_CFG80211
++	union iwreq_data wrqu;
++	struct	mlme_priv *pmlmepriv = &padapter->mlmepriv;
++
++	_rtw_memset(&wrqu, 0, sizeof(union iwreq_data));
++
++	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
++
++	_rtw_memcpy(wrqu.ap_addr.sa_data, pmlmepriv->cur_network.network.MacAddress, ETH_ALEN);
++
++	//DBG_871X("+rtw_indicate_wx_assoc_event\n");
++	wireless_send_event(padapter->pnetdev, SIOCGIWAP, &wrqu, NULL);
++#endif
++}
++
++void rtw_indicate_wx_disassoc_event(_adapter *padapter)
++{
++#ifndef CONFIG_IOCTL_CFG80211
++	union iwreq_data wrqu;
++
++	_rtw_memset(&wrqu, 0, sizeof(union iwreq_data));
++
++	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
++	_rtw_memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
++
++	//DBG_871X("+rtw_indicate_wx_disassoc_event\n");
++	wireless_send_event(padapter->pnetdev, SIOCGIWAP, &wrqu, NULL);
++#endif
++}
++
++/*
++uint	rtw_is_cckrates_included(u8 *rate)
++{	
++		u32	i = 0;			
++
++		while(rate[i]!=0)
++		{		
++			if  (  (((rate[i]) & 0x7f) == 2)	|| (((rate[i]) & 0x7f) == 4) ||		
++			(((rate[i]) & 0x7f) == 11)  || (((rate[i]) & 0x7f) == 22) )		
++			return _TRUE;	
++			i++;
++		}
++		
++		return _FALSE;
++}
++
++uint	rtw_is_cckratesonly_included(u8 *rate)
++{
++	u32 i = 0;
++
++	while(rate[i]!=0)
++	{
++			if  (  (((rate[i]) & 0x7f) != 2) && (((rate[i]) & 0x7f) != 4) &&
++				(((rate[i]) & 0x7f) != 11)  && (((rate[i]) & 0x7f) != 22) )
++			return _FALSE;		
++			i++;
++	}
++	
++	return _TRUE;
++}
++*/
++
++static char *translate_scan(_adapter *padapter, 
++				struct iw_request_info* info, struct wlan_network *pnetwork,
++				char *start, char *stop)
++{
++	struct iw_event iwe;
++	u16 cap;
++	u32 ht_ielen = 0;
++	char custom[MAX_CUSTOM_LEN];
++	char *p;
++	u16 max_rate=0, rate, ht_cap=_FALSE;
++	u32 i = 0;	
++	char	*current_val;
++	long rssi;
++	u8 bw_40MHz=0, short_GI=0;
++	u16 mcs_rate=0;
++	struct registry_priv *pregpriv = &padapter->registrypriv;
++#ifdef CONFIG_P2P
++	struct wifidirect_info	*pwdinfo = &padapter->wdinfo;
++#endif //CONFIG_P2P
++
++#ifdef CONFIG_P2P
++#ifdef CONFIG_WFD
++	if ( SCAN_RESULT_ALL == pwdinfo->wfd_info->scan_result_type )
++	{
++
++	}
++	else if ( ( SCAN_RESULT_P2P_ONLY == pwdinfo->wfd_info->scan_result_type ) || 
++		      ( SCAN_RESULT_WFD_TYPE == pwdinfo->wfd_info->scan_result_type ) )
++#endif // CONFIG_WFD
++	{
++		if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++		{
++			u32	blnGotP2PIE = _FALSE;
++			
++			//	User is doing the P2P device discovery
++			//	The prefix of SSID should be "DIRECT-" and the IE should contains the P2P IE.
++			//	If not, the driver should ignore this AP and go to the next AP.
++
++			//	Verifying the SSID
++			if ( _rtw_memcmp( pnetwork->network.Ssid.Ssid, pwdinfo->p2p_wildcard_ssid, P2P_WILDCARD_SSID_LEN ) )
++			{
++				u32	p2pielen = 0;
++
++				//	Verifying the P2P IE
++				if ( rtw_get_p2p_ie( &pnetwork->network.IEs[12], pnetwork->network.IELength - 12, NULL, &p2pielen) )
++				{
++					blnGotP2PIE = _TRUE;
++				}
++			}
++
++			if ( blnGotP2PIE == _FALSE )
++			{
++				return start;
++			}
++			
++		}
++	}
++
++#ifdef CONFIG_WFD
++	if ( SCAN_RESULT_WFD_TYPE == pwdinfo->wfd_info->scan_result_type )
++	{
++		u32	blnGotWFD = _FALSE;
++		u8	wfd_ie[ 128 ] = { 0x00 };
++		uint	wfd_ielen = 0;
++		
++		if ( rtw_get_wfd_ie( &pnetwork->network.IEs[12], pnetwork->network.IELength - 12,  wfd_ie, &wfd_ielen ) )
++		{
++			u8	wfd_devinfo[ 6 ] = { 0x00 };
++			uint	wfd_devlen = 6;
++			
++			if ( rtw_get_wfd_attr_content( wfd_ie, wfd_ielen, WFD_ATTR_DEVICE_INFO, wfd_devinfo, &wfd_devlen) )
++			{
++				if ( pwdinfo->wfd_info->wfd_device_type == WFD_DEVINFO_PSINK )
++				{
++					//	the first two bits will indicate the WFD device type
++					if ( ( wfd_devinfo[ 1 ] & 0x03 ) == WFD_DEVINFO_SOURCE )
++					{
++						//	If this device is Miracast PSink device, the scan reuslt should just provide the Miracast source.
++						blnGotWFD = _TRUE;
++					}
++				}
++				else if ( pwdinfo->wfd_info->wfd_device_type == WFD_DEVINFO_SOURCE )
++				{
++					//	the first two bits will indicate the WFD device type
++					if ( ( wfd_devinfo[ 1 ] & 0x03 ) == WFD_DEVINFO_PSINK )
++					{
++						//	If this device is Miracast source device, the scan reuslt should just provide the Miracast PSink.
++						//	Todo: How about the SSink?!
++						blnGotWFD = _TRUE;
++					}
++				}
++			}
++		}
++		
++		if ( blnGotWFD == _FALSE )
++		{
++			return start;
++		}
++	}
++#endif // CONFIG_WFD
++
++#endif //CONFIG_P2P
++	/*  AP MAC address  */
++	iwe.cmd = SIOCGIWAP;
++	iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
++
++	_rtw_memcpy(iwe.u.ap_addr.sa_data, pnetwork->network.MacAddress, ETH_ALEN);
++	start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_ADDR_LEN);
++
++	/* Add the ESSID */
++	iwe.cmd = SIOCGIWESSID;
++	iwe.u.data.flags = 1;	
++	iwe.u.data.length = min((u16)pnetwork->network.Ssid.SsidLength, (u16)32);
++	start = iwe_stream_add_point(info, start, stop, &iwe, pnetwork->network.Ssid.Ssid);
++
++	//parsing HT_CAP_IE
++		p = rtw_get_ie(&pnetwork->network.IEs[12], _HT_CAPABILITY_IE_, &ht_ielen, pnetwork->network.IELength-12);
++
++	if(p && ht_ielen>0)
++	{
++		struct rtw_ieee80211_ht_cap *pht_capie;
++		ht_cap = _TRUE;			
++		pht_capie = (struct rtw_ieee80211_ht_cap *)(p+2);		
++		_rtw_memcpy(&mcs_rate , pht_capie->supp_mcs_set, 2);
++		bw_40MHz = (pht_capie->cap_info&IEEE80211_HT_CAP_SUP_WIDTH) ? 1:0;
++		short_GI = (pht_capie->cap_info&(IEEE80211_HT_CAP_SGI_20|IEEE80211_HT_CAP_SGI_40)) ? 1:0;
++	}
++
++	/* Add the protocol name */
++	iwe.cmd = SIOCGIWNAME;
++	if ((rtw_is_cckratesonly_included((u8*)&pnetwork->network.SupportedRates)) == _TRUE)		
++	{
++		if(ht_cap == _TRUE)
++			snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11bn");
++		else
++		snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11b");
++	}	
++	else if ((rtw_is_cckrates_included((u8*)&pnetwork->network.SupportedRates)) == _TRUE)	
++	{
++		if(ht_cap == _TRUE)
++			snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11bgn");
++		else
++		snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11bg");
++	}	
++	else
++	{
++		if(pnetwork->network.Configuration.DSConfig > 14)
++		{
++			if(ht_cap == _TRUE)
++				snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11an");
++			else
++				snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11a");
++		}
++		else
++		{
++			if(ht_cap == _TRUE)
++				snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11gn");
++			else
++				snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11g");
++		}
++	}	
++
++	start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_CHAR_LEN);
++
++	  /* Add mode */
++        iwe.cmd = SIOCGIWMODE;
++	_rtw_memcpy((u8 *)&cap, rtw_get_capability_from_ie(pnetwork->network.IEs), 2);
++
++
++	cap = le16_to_cpu(cap);
++
++	if(cap & (WLAN_CAPABILITY_IBSS |WLAN_CAPABILITY_BSS)){
++		if (cap & WLAN_CAPABILITY_BSS)
++			iwe.u.mode = IW_MODE_MASTER;
++		else
++			iwe.u.mode = IW_MODE_ADHOC;
++
++		start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_UINT_LEN);
++	}
++
++	if(pnetwork->network.Configuration.DSConfig<1 /*|| pnetwork->network.Configuration.DSConfig>14*/)
++		pnetwork->network.Configuration.DSConfig = 1;
++
++	 /* Add frequency/channel */
++	iwe.cmd = SIOCGIWFREQ;
++	iwe.u.freq.m = rtw_ch2freq(pnetwork->network.Configuration.DSConfig) * 100000;
++	iwe.u.freq.e = 1;
++	iwe.u.freq.i = pnetwork->network.Configuration.DSConfig;
++	start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_FREQ_LEN);
++
++	/* Add encryption capability */
++	iwe.cmd = SIOCGIWENCODE;
++	if (cap & WLAN_CAPABILITY_PRIVACY)
++		iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
++	else
++		iwe.u.data.flags = IW_ENCODE_DISABLED;
++	iwe.u.data.length = 0;
++	start = iwe_stream_add_point(info, start, stop, &iwe, pnetwork->network.Ssid.Ssid);
++
++	/*Add basic and extended rates */
++	max_rate = 0;
++	p = custom;
++	p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), " Rates (Mb/s): ");
++	while(pnetwork->network.SupportedRates[i]!=0)
++	{
++		rate = pnetwork->network.SupportedRates[i]&0x7F; 
++		if (rate > max_rate)
++			max_rate = rate;
++		p += snprintf(p, MAX_CUSTOM_LEN - (p - custom),
++			      "%d%s ", rate >> 1, (rate & 1) ? ".5" : "");
++		i++;
++	}
++	
++	if(ht_cap == _TRUE)
++	{
++		if(mcs_rate&0x8000)//MCS15
++		{
++			max_rate = (bw_40MHz) ? ((short_GI)?300:270):((short_GI)?144:130);
++			
++		}
++		else if(mcs_rate&0x0080)//MCS7
++		{
++			max_rate = (bw_40MHz) ? ((short_GI)?150:135):((short_GI)?72:65);
++		}
++		else//default MCS7
++		{
++			DBG_871X("wx_get_scan, mcs_rate_bitmap=0x%x\n", mcs_rate);
++			max_rate = (bw_40MHz) ? ((short_GI)?150:135):((short_GI)?72:65);
++		}
++
++		max_rate = max_rate*2;//Mbps/2;		
++	}
++
++	iwe.cmd = SIOCGIWRATE;
++	iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
++	iwe.u.bitrate.value = max_rate * 500000;
++	start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_PARAM_LEN);
++
++	//parsing WPA/WPA2 IE
++	{
++		u8 buf[MAX_WPA_IE_LEN];
++		u8 wpa_ie[255],rsn_ie[255];
++		u16 wpa_len=0,rsn_len=0;
++		u8 *p;
++		sint out_len=0;
++		out_len=rtw_get_sec_ie(pnetwork->network.IEs ,pnetwork->network.IELength,rsn_ie,&rsn_len,wpa_ie,&wpa_len);
++		RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("rtw_wx_get_scan: ssid=%s\n",pnetwork->network.Ssid.Ssid));
++		RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("rtw_wx_get_scan: wpa_len=%d rsn_len=%d\n",wpa_len,rsn_len));
++
++		if (wpa_len > 0)
++		{
++			p=buf;
++			_rtw_memset(buf, 0, MAX_WPA_IE_LEN);
++			p += sprintf(p, "wpa_ie=");
++			for (i = 0; i < wpa_len; i++) {
++				p += sprintf(p, "%02x", wpa_ie[i]);
++			}
++	
++			_rtw_memset(&iwe, 0, sizeof(iwe));
++			iwe.cmd = IWEVCUSTOM;
++			iwe.u.data.length = strlen(buf);
++			start = iwe_stream_add_point(info, start, stop, &iwe,buf);
++			
++			_rtw_memset(&iwe, 0, sizeof(iwe));
++			iwe.cmd =IWEVGENIE;
++			iwe.u.data.length = wpa_len;
++			start = iwe_stream_add_point(info, start, stop, &iwe, wpa_ie);			
++		}
++		if (rsn_len > 0)
++		{
++			p = buf;
++			_rtw_memset(buf, 0, MAX_WPA_IE_LEN);
++			p += sprintf(p, "rsn_ie=");
++			for (i = 0; i < rsn_len; i++) {
++				p += sprintf(p, "%02x", rsn_ie[i]);
++			}
++			_rtw_memset(&iwe, 0, sizeof(iwe));
++			iwe.cmd = IWEVCUSTOM;
++			iwe.u.data.length = strlen(buf);
++			start = iwe_stream_add_point(info, start, stop, &iwe,buf);
++		
++			_rtw_memset(&iwe, 0, sizeof(iwe));
++			iwe.cmd =IWEVGENIE;
++			iwe.u.data.length = rsn_len;
++			start = iwe_stream_add_point(info, start, stop, &iwe, rsn_ie);		
++		}
++	}
++
++	{ //parsing WPS IE
++		uint cnt = 0,total_ielen;	
++		u8 *wpsie_ptr=NULL;
++		uint wps_ielen = 0;		
++
++		u8 *ie_ptr = pnetwork->network.IEs +_FIXED_IE_LENGTH_;
++		total_ielen= pnetwork->network.IELength - _FIXED_IE_LENGTH_;
++
++		while(cnt < total_ielen)
++		{
++			if(rtw_is_wps_ie(&ie_ptr[cnt], &wps_ielen) && (wps_ielen>2))			
++			{
++				wpsie_ptr = &ie_ptr[cnt];
++				iwe.cmd =IWEVGENIE;
++				iwe.u.data.length = (u16)wps_ielen;
++				start = iwe_stream_add_point(info, start, stop, &iwe, wpsie_ptr);						
++			}			
++			cnt+=ie_ptr[cnt+1]+2; //goto next		
++		}
++	}
++
++
++{
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	u8 ss, sq;
++	
++	/* Add quality statistics */
++	iwe.cmd = IWEVQUAL;
++	iwe.u.qual.updated = IW_QUAL_QUAL_UPDATED | IW_QUAL_LEVEL_UPDATED | IW_QUAL_NOISE_INVALID
++	#ifdef CONFIG_SIGNAL_DISPLAY_DBM
++		| IW_QUAL_DBM
++	#endif
++	;
++
++	if ( check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE &&
++		is_same_network(&pmlmepriv->cur_network.network, &pnetwork->network)) {
++		ss = padapter->recvpriv.signal_strength;
++		sq = padapter->recvpriv.signal_qual;
++	} else {
++		ss = pnetwork->network.PhyInfo.SignalStrength;
++		sq = pnetwork->network.PhyInfo.SignalQuality;
++	}
++	
++	
++	#ifdef CONFIG_SIGNAL_DISPLAY_DBM
++	iwe.u.qual.level = (u8) translate_percentage_to_dbm(ss);//dbm
++	#else
++	iwe.u.qual.level = (u8)ss;//%
++	#endif
++	
++	iwe.u.qual.qual = (u8)sq;   // signal quality
++
++	#ifdef CONFIG_PLATFORM_ROCKCHIPS
++	iwe.u.qual.noise = -100; // noise level suggest by zhf@rockchips
++	#else 
++	iwe.u.qual.noise = 0; // noise level
++	#endif //CONFIG_PLATFORM_ROCKCHIPS
++	
++	//DBG_871X("iqual=%d, ilevel=%d, inoise=%d, iupdated=%d\n", iwe.u.qual.qual, iwe.u.qual.level , iwe.u.qual.noise, iwe.u.qual.updated);
++
++	start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_QUAL_LEN);
++}
++	
++	return start;	
++}
++
++static int wpa_set_auth_algs(struct net_device *dev, u32 value)
++{	
++	_adapter *padapter = (_adapter *) rtw_netdev_priv(dev);
++	int ret = 0;
++
++	if ((value & AUTH_ALG_SHARED_KEY)&&(value & AUTH_ALG_OPEN_SYSTEM))
++	{
++		DBG_871X("wpa_set_auth_algs, AUTH_ALG_SHARED_KEY and  AUTH_ALG_OPEN_SYSTEM [value:0x%x]\n",value);
++		padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled;
++		padapter->securitypriv.ndisauthtype = Ndis802_11AuthModeAutoSwitch;
++		padapter->securitypriv.dot11AuthAlgrthm = dot11AuthAlgrthm_Auto;
++	} 
++	else if (value & AUTH_ALG_SHARED_KEY)
++	{
++		DBG_871X("wpa_set_auth_algs, AUTH_ALG_SHARED_KEY  [value:0x%x]\n",value);
++		padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled;
++
++#ifdef CONFIG_PLATFORM_MT53XX
++		padapter->securitypriv.ndisauthtype = Ndis802_11AuthModeAutoSwitch;
++		padapter->securitypriv.dot11AuthAlgrthm = dot11AuthAlgrthm_Auto;
++#else
++		padapter->securitypriv.ndisauthtype = Ndis802_11AuthModeShared;
++		padapter->securitypriv.dot11AuthAlgrthm = dot11AuthAlgrthm_Shared;
++#endif
++	} 
++	else if(value & AUTH_ALG_OPEN_SYSTEM)
++	{
++		DBG_871X("wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM\n");
++		//padapter->securitypriv.ndisencryptstatus = Ndis802_11EncryptionDisabled;
++		if(padapter->securitypriv.ndisauthtype < Ndis802_11AuthModeWPAPSK)
++		{
++#ifdef CONFIG_PLATFORM_MT53XX
++			padapter->securitypriv.ndisauthtype = Ndis802_11AuthModeAutoSwitch;
++			padapter->securitypriv.dot11AuthAlgrthm = dot11AuthAlgrthm_Auto;
++#else
++			padapter->securitypriv.ndisauthtype = Ndis802_11AuthModeOpen;
++ 			padapter->securitypriv.dot11AuthAlgrthm = dot11AuthAlgrthm_Open;
++#endif
++		}
++		
++	}
++	else if(value & AUTH_ALG_LEAP)
++	{
++		DBG_871X("wpa_set_auth_algs, AUTH_ALG_LEAP\n");
++	}
++	else
++	{
++		DBG_871X("wpa_set_auth_algs, error!\n");
++		ret = -EINVAL;
++	}
++
++	return ret;
++	
++}
++
++static int wpa_set_encryption(struct net_device *dev, struct ieee_param *param, u32 param_len)
++{
++	int ret = 0;
++	u32 wep_key_idx, wep_key_len,wep_total_len;
++	NDIS_802_11_WEP	 *pwep = NULL;	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_priv 	*pmlmepriv = &padapter->mlmepriv;		
++	struct security_priv *psecuritypriv = &padapter->securitypriv;
++#ifdef CONFIG_P2P
++	struct wifidirect_info* pwdinfo = &padapter->wdinfo;
++#endif //CONFIG_P2P
++
++_func_enter_;
++
++	param->u.crypt.err = 0;
++	param->u.crypt.alg[IEEE_CRYPT_ALG_NAME_LEN - 1] = '\0';
++
++	if (param_len < (u32) ((u8 *) param->u.crypt.key - (u8 *) param) + param->u.crypt.key_len)
++	{
++		ret =  -EINVAL;
++		goto exit;
++	}
++
++	if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
++	    param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
++	    param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) 
++	{
++
++		if (param->u.crypt.idx >= WEP_KEYS
++#ifdef CONFIG_IEEE80211W
++			&& param->u.crypt.idx > BIP_MAX_KEYID
++#endif //CONFIG_IEEE80211W
++			)
++		{
++			ret = -EINVAL;
++			goto exit;
++		}
++	} 
++	else 
++	{
++
++		{
++			ret = -EINVAL;
++			goto exit;
++		}
++	}
++
++	if (strcmp(param->u.crypt.alg, "WEP") == 0)
++	{
++		RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_err_,("wpa_set_encryption, crypt.alg = WEP\n"));
++		DBG_871X("wpa_set_encryption, crypt.alg = WEP\n");
++
++		padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled;
++		padapter->securitypriv.dot11PrivacyAlgrthm=_WEP40_;
++		padapter->securitypriv.dot118021XGrpPrivacy=_WEP40_;
++
++		wep_key_idx = param->u.crypt.idx;
++		wep_key_len = param->u.crypt.key_len;
++
++		RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_info_,("(1)wep_key_idx=%d\n", wep_key_idx));
++		DBG_871X("(1)wep_key_idx=%d\n", wep_key_idx);
++
++		if (wep_key_idx > WEP_KEYS)
++			return -EINVAL;
++
++		RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_info_,("(2)wep_key_idx=%d\n", wep_key_idx));
++
++		if (wep_key_len > 0) 
++		{
++		 	wep_key_len = wep_key_len <= 5 ? 5 : 13;
++			wep_total_len = wep_key_len + FIELD_OFFSET(NDIS_802_11_WEP, KeyMaterial);
++		 	pwep =(NDIS_802_11_WEP	 *) rtw_malloc(wep_total_len);
++			if(pwep == NULL){
++				RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_err_,(" wpa_set_encryption: pwep allocate fail !!!\n"));
++				goto exit;
++			}
++
++		 	_rtw_memset(pwep, 0, wep_total_len);
++
++		 	pwep->KeyLength = wep_key_len;
++			pwep->Length = wep_total_len;
++
++			if(wep_key_len==13)
++			{
++				padapter->securitypriv.dot11PrivacyAlgrthm=_WEP104_;
++				padapter->securitypriv.dot118021XGrpPrivacy=_WEP104_;
++			}
++		}
++		else {		
++			ret = -EINVAL;
++			goto exit;
++		}
++
++		pwep->KeyIndex = wep_key_idx;
++		pwep->KeyIndex |= 0x80000000;
++
++		_rtw_memcpy(pwep->KeyMaterial,  param->u.crypt.key, pwep->KeyLength);
++
++		if(param->u.crypt.set_tx)
++		{
++			DBG_871X("wep, set_tx=1\n");
++
++			if(rtw_set_802_11_add_wep(padapter, pwep) == (u8)_FAIL)
++			{
++				ret = -EOPNOTSUPP ;
++			}
++		}
++		else
++		{
++			DBG_871X("wep, set_tx=0\n");
++			
++			//don't update "psecuritypriv->dot11PrivacyAlgrthm" and 
++			//"psecuritypriv->dot11PrivacyKeyIndex=keyid", but can rtw_set_key to fw/cam
++			
++			if (wep_key_idx >= WEP_KEYS) {
++				ret = -EOPNOTSUPP ;
++				goto exit;
++			}				
++			
++		      _rtw_memcpy(&(psecuritypriv->dot11DefKey[wep_key_idx].skey[0]), pwep->KeyMaterial, pwep->KeyLength);
++			psecuritypriv->dot11DefKeylen[wep_key_idx]=pwep->KeyLength;	
++			rtw_set_key(padapter, psecuritypriv, wep_key_idx, 0);
++		}
++
++		goto exit;		
++	}
++
++	if(padapter->securitypriv.dot11AuthAlgrthm == dot11AuthAlgrthm_8021X) // 802_1x
++	{
++		struct sta_info * psta,*pbcmc_sta;
++		struct sta_priv * pstapriv = &padapter->stapriv;
++
++		if (check_fwstate(pmlmepriv, WIFI_STATION_STATE | WIFI_MP_STATE) == _TRUE) //sta mode
++		{
++			psta = rtw_get_stainfo(pstapriv, get_bssid(pmlmepriv));				
++			if (psta == NULL) {
++				//DEBUG_ERR( ("Set wpa_set_encryption: Obtain Sta_info fail \n"));
++			}
++			else
++			{
++				//Jeff: don't disable ieee8021x_blocked while clearing key
++				if (strcmp(param->u.crypt.alg, "none") != 0) 
++					psta->ieee8021x_blocked = _FALSE;
++				
++				if((padapter->securitypriv.ndisencryptstatus == Ndis802_11Encryption2Enabled)||
++						(padapter->securitypriv.ndisencryptstatus ==  Ndis802_11Encryption3Enabled))
++				{
++					psta->dot118021XPrivacy = padapter->securitypriv.dot11PrivacyAlgrthm;
++				}		
++
++				if(param->u.crypt.set_tx ==1)//pairwise key
++				{ 
++					_rtw_memcpy(psta->dot118021x_UncstKey.skey,  param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len));
++					
++					if(strcmp(param->u.crypt.alg, "TKIP") == 0)//set mic key
++					{						
++						//DEBUG_ERR(("\nset key length :param->u.crypt.key_len=%d\n", param->u.crypt.key_len));
++						_rtw_memcpy(psta->dot11tkiptxmickey.skey, &(param->u.crypt.key[16]), 8);
++						_rtw_memcpy(psta->dot11tkiprxmickey.skey, &(param->u.crypt.key[24]), 8);
++
++						padapter->securitypriv.busetkipkey=_FALSE;
++						//_set_timer(&padapter->securitypriv.tkip_timer, 50);						
++					}
++
++					//DEBUG_ERR(("\n param->u.crypt.key_len=%d\n",param->u.crypt.key_len));
++					//DEBUG_ERR(("\n ~~~~stastakey:unicastkey\n"));
++					DBG_871X("\n ~~~~stastakey:unicastkey\n");
++					
++					rtw_setstakey_cmd(padapter, (unsigned char *)psta, _TRUE);
++				}
++				else//group key
++				{ 					
++					if(strcmp(param->u.crypt.alg, "TKIP") == 0 || strcmp(param->u.crypt.alg, "CCMP") == 0)
++					{
++						_rtw_memcpy(padapter->securitypriv.dot118021XGrpKey[param->u.crypt.idx].skey,  param->u.crypt.key,(param->u.crypt.key_len>16 ?16:param->u.crypt.key_len));
++						//only TKIP group key need to install this
++						if(param->u.crypt.key_len > 16)
++						{
++							_rtw_memcpy(padapter->securitypriv.dot118021XGrptxmickey[param->u.crypt.idx].skey,&(param->u.crypt.key[16]),8);
++							_rtw_memcpy(padapter->securitypriv.dot118021XGrprxmickey[param->u.crypt.idx].skey,&(param->u.crypt.key[24]),8);
++						}
++						padapter->securitypriv.binstallGrpkey = _TRUE;	
++						//DEBUG_ERR((" param->u.crypt.key_len=%d\n", param->u.crypt.key_len));
++						DBG_871X(" ~~~~set sta key:groupkey\n");
++	
++						padapter->securitypriv.dot118021XGrpKeyid = param->u.crypt.idx;
++	
++						rtw_set_key(padapter,&padapter->securitypriv,param->u.crypt.idx, 1);
++					}
++#ifdef CONFIG_IEEE80211W
++					else if(strcmp(param->u.crypt.alg, "BIP") == 0)
++					{
++						int no;
++						//printk("BIP key_len=%d , index=%d @@@@@@@@@@@@@@@@@@\n", param->u.crypt.key_len, param->u.crypt.idx);
++						//save the IGTK key, length 16 bytes
++						_rtw_memcpy(padapter->securitypriv.dot11wBIPKey[param->u.crypt.idx].skey,  param->u.crypt.key,(param->u.crypt.key_len>16 ?16:param->u.crypt.key_len));
++						/*printk("IGTK key below:\n");
++						for(no=0;no<16;no++)
++							printk(" %02x ", padapter->securitypriv.dot11wBIPKey[param->u.crypt.idx].skey[no]);
++						printk("\n");*/
++						padapter->securitypriv.dot11wBIPKeyid = param->u.crypt.idx;
++						padapter->securitypriv.binstallBIPkey = _TRUE;
++						DBG_871X(" ~~~~set sta key:IGKT\n");
++					}
++#endif //CONFIG_IEEE80211W
++					
++#ifdef CONFIG_P2P
++					if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_PROVISIONING_ING))
++					{
++						rtw_p2p_set_state(pwdinfo, P2P_STATE_PROVISIONING_DONE);
++					}
++#endif //CONFIG_P2P
++					
++				}						
++			}
++
++			pbcmc_sta=rtw_get_bcmc_stainfo(padapter);
++			if(pbcmc_sta==NULL)
++			{
++				//DEBUG_ERR( ("Set OID_802_11_ADD_KEY: bcmc stainfo is null \n"));
++			}
++			else
++			{
++				//Jeff: don't disable ieee8021x_blocked while clearing key
++				if (strcmp(param->u.crypt.alg, "none") != 0) 
++					pbcmc_sta->ieee8021x_blocked = _FALSE;
++				
++				if((padapter->securitypriv.ndisencryptstatus == Ndis802_11Encryption2Enabled)||
++						(padapter->securitypriv.ndisencryptstatus ==  Ndis802_11Encryption3Enabled))
++				{							
++					pbcmc_sta->dot118021XPrivacy = padapter->securitypriv.dot11PrivacyAlgrthm;
++				}					
++			}				
++		}
++		else if(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE)) //adhoc mode
++		{		
++		}			
++	}
++
++exit:
++	
++	if (pwep) {
++		rtw_mfree((u8 *)pwep, wep_total_len);		
++	}	
++	
++	_func_exit_;
++	
++	return ret;	
++}
++
++static int rtw_set_wpa_ie(_adapter *padapter, char *pie, unsigned short ielen)
++{
++	u8 *buf=NULL, *pos=NULL;	
++	u32 left; 	
++	int group_cipher = 0, pairwise_cipher = 0;
++	int ret = 0;
++	u8	null_addr[]= {0,0,0,0,0,0};
++#ifdef CONFIG_P2P
++	struct wifidirect_info* pwdinfo = &padapter->wdinfo;
++#endif //CONFIG_P2P
++
++	if((ielen > MAX_WPA_IE_LEN) || (pie == NULL)){
++		_clr_fwstate_(&padapter->mlmepriv, WIFI_UNDER_WPS);
++		if(pie == NULL)	
++			return ret;
++		else
++			return -EINVAL;
++	}
++
++	if(ielen)
++	{		
++		buf = rtw_zmalloc(ielen);
++		if (buf == NULL){
++			ret =  -ENOMEM;
++			goto exit;
++		}
++	
++		_rtw_memcpy(buf, pie , ielen);
++
++		//dump
++		{
++			int i;
++			DBG_871X("\n wpa_ie(length:%d):\n", ielen);
++			for(i=0;i<ielen;i=i+8)
++				DBG_871X("0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x \n",buf[i],buf[i+1],buf[i+2],buf[i+3],buf[i+4],buf[i+5],buf[i+6],buf[i+7]);
++		}
++	
++		pos = buf;
++		if(ielen < RSN_HEADER_LEN){
++			RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_err_,("Ie len too short %d\n", ielen));
++			ret  = -1;
++			goto exit;
++		}
++
++#if 0
++		pos += RSN_HEADER_LEN;
++		left  = ielen - RSN_HEADER_LEN;
++		
++		if (left >= RSN_SELECTOR_LEN){
++			pos += RSN_SELECTOR_LEN;
++			left -= RSN_SELECTOR_LEN;
++		}		
++		else if (left > 0){
++			RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_err_,("Ie length mismatch, %u too much \n", left));
++			ret =-1;
++			goto exit;
++		}
++#endif		
++		
++		if(rtw_parse_wpa_ie(buf, ielen, &group_cipher, &pairwise_cipher) == _SUCCESS)
++		{
++			padapter->securitypriv.dot11AuthAlgrthm= dot11AuthAlgrthm_8021X;
++			padapter->securitypriv.ndisauthtype=Ndis802_11AuthModeWPAPSK;
++			_rtw_memcpy(padapter->securitypriv.supplicant_ie, &buf[0], ielen);	
++		}
++	
++		if(rtw_parse_wpa2_ie(buf, ielen, &group_cipher, &pairwise_cipher) == _SUCCESS)
++		{
++			padapter->securitypriv.dot11AuthAlgrthm= dot11AuthAlgrthm_8021X;
++			padapter->securitypriv.ndisauthtype=Ndis802_11AuthModeWPA2PSK;	
++			_rtw_memcpy(padapter->securitypriv.supplicant_ie, &buf[0], ielen);	
++		}
++			
++		if (group_cipher == 0)
++		{
++			group_cipher = WPA_CIPHER_NONE;
++		}
++		if (pairwise_cipher == 0)
++		{
++			pairwise_cipher = WPA_CIPHER_NONE;
++		}
++			
++		switch(group_cipher)
++		{
++			case WPA_CIPHER_NONE:
++				padapter->securitypriv.dot118021XGrpPrivacy=_NO_PRIVACY_;
++				padapter->securitypriv.ndisencryptstatus=Ndis802_11EncryptionDisabled;
++				break;
++			case WPA_CIPHER_WEP40:
++				padapter->securitypriv.dot118021XGrpPrivacy=_WEP40_;
++				padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled;
++				break;
++			case WPA_CIPHER_TKIP:
++				padapter->securitypriv.dot118021XGrpPrivacy=_TKIP_;
++				padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption2Enabled;
++				break;
++			case WPA_CIPHER_CCMP:
++				padapter->securitypriv.dot118021XGrpPrivacy=_AES_;
++				padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption3Enabled;
++				break;
++			case WPA_CIPHER_WEP104:	
++				padapter->securitypriv.dot118021XGrpPrivacy=_WEP104_;
++				padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled;
++				break;
++		}
++
++		switch(pairwise_cipher)
++		{
++			case WPA_CIPHER_NONE:
++				padapter->securitypriv.dot11PrivacyAlgrthm=_NO_PRIVACY_;
++				padapter->securitypriv.ndisencryptstatus=Ndis802_11EncryptionDisabled;
++				break;
++			case WPA_CIPHER_WEP40:
++				padapter->securitypriv.dot11PrivacyAlgrthm=_WEP40_;
++				padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled;
++				break;
++			case WPA_CIPHER_TKIP:
++				padapter->securitypriv.dot11PrivacyAlgrthm=_TKIP_;
++				padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption2Enabled;
++				break;
++			case WPA_CIPHER_CCMP:
++				padapter->securitypriv.dot11PrivacyAlgrthm=_AES_;
++				padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption3Enabled;
++				break;
++			case WPA_CIPHER_WEP104:	
++				padapter->securitypriv.dot11PrivacyAlgrthm=_WEP104_;
++				padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled;
++				break;
++		}
++		
++		_clr_fwstate_(&padapter->mlmepriv, WIFI_UNDER_WPS);
++		{//set wps_ie	
++			u16 cnt = 0;	
++			u8 eid, wps_oui[4]={0x0,0x50,0xf2,0x04};
++			 
++			while( cnt < ielen )
++			{
++				eid = buf[cnt];
++		
++				if((eid==_VENDOR_SPECIFIC_IE_)&&(_rtw_memcmp(&buf[cnt+2], wps_oui, 4)==_TRUE))
++				{
++					DBG_871X("SET WPS_IE\n");
++
++					padapter->securitypriv.wps_ie_len = ( (buf[cnt+1]+2) < (MAX_WPA_IE_LEN<<2)) ? (buf[cnt+1]+2):(MAX_WPA_IE_LEN<<2);
++					
++					_rtw_memcpy(padapter->securitypriv.wps_ie, &buf[cnt], padapter->securitypriv.wps_ie_len);
++					
++					set_fwstate(&padapter->mlmepriv, WIFI_UNDER_WPS);
++					
++#ifdef CONFIG_P2P
++					if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_GONEGO_OK))
++					{
++						rtw_p2p_set_state(pwdinfo, P2P_STATE_PROVISIONING_ING);
++					}
++#endif //CONFIG_P2P
++					cnt += buf[cnt+1]+2;
++					
++					break;
++				} else {
++					cnt += buf[cnt+1]+2; //goto next	
++				}				
++			}			
++		}		
++	}
++
++	//TKIP and AES disallow multicast packets until installing group key
++	if(padapter->securitypriv.dot11PrivacyAlgrthm == _TKIP_ 
++		|| padapter->securitypriv.dot11PrivacyAlgrthm == _TKIP_WTMIC_ 
++		|| padapter->securitypriv.dot11PrivacyAlgrthm == _AES_)
++		//WPS open need to enable multicast
++		//|| check_fwstate(&padapter->mlmepriv, WIFI_UNDER_WPS) == _TRUE)
++		rtw_hal_set_hwreg(padapter, HW_VAR_OFF_RCR_AM, null_addr);
++
++	RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_info_,
++		 ("rtw_set_wpa_ie: pairwise_cipher=0x%08x padapter->securitypriv.ndisencryptstatus=%d padapter->securitypriv.ndisauthtype=%d\n",
++		  pairwise_cipher, padapter->securitypriv.ndisencryptstatus, padapter->securitypriv.ndisauthtype));
++ 	
++exit:
++
++	if (buf) rtw_mfree(buf, ielen);
++	
++	return ret;	
++}
++
++static int rtw_wx_get_name(struct net_device *dev, 
++			     struct iw_request_info *info, 
++			     union iwreq_data *wrqu, char *extra)
++{
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	u16 cap;
++	u32 ht_ielen = 0;
++	char *p;
++	u8 ht_cap=_FALSE;
++	struct	mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
++	WLAN_BSSID_EX  *pcur_bss = &pmlmepriv->cur_network.network;
++	NDIS_802_11_RATES_EX* prates = NULL;
++
++	RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("cmd_code=%x\n", info->cmd));
++
++	_func_enter_;	
++
++	if (check_fwstate(pmlmepriv, _FW_LINKED|WIFI_ADHOC_MASTER_STATE) == _TRUE)
++	{
++		//parsing HT_CAP_IE
++		p = rtw_get_ie(&pcur_bss->IEs[12], _HT_CAPABILITY_IE_, &ht_ielen, pcur_bss->IELength-12);
++		if(p && ht_ielen>0)
++		{
++			ht_cap = _TRUE;
++		}
++
++		prates = &pcur_bss->SupportedRates;
++
++		if (rtw_is_cckratesonly_included((u8*)prates) == _TRUE)
++		{
++			if(ht_cap == _TRUE)
++				snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11bn");
++			else
++				snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11b");
++		}
++		else if ((rtw_is_cckrates_included((u8*)prates)) == _TRUE)
++		{
++			if(ht_cap == _TRUE)
++				snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11bgn");
++			else
++				snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11bg");
++		}
++		else
++		{
++			if(pcur_bss->Configuration.DSConfig > 14)
++			{
++				if(ht_cap == _TRUE)
++					snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11an");
++				else
++					snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11a");
++			}
++			else
++			{
++				if(ht_cap == _TRUE)
++					snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11gn");
++				else
++					snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11g");
++			}
++		}
++	}
++	else
++	{
++		//prates = &padapter->registrypriv.dev_network.SupportedRates;
++		//snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11g");
++		snprintf(wrqu->name, IFNAMSIZ, "unassociated");
++	}
++
++	_func_exit_;
++
++	return 0;
++}
++
++static int rtw_wx_set_freq(struct net_device *dev, 
++			     struct iw_request_info *info, 
++			     union iwreq_data *wrqu, char *extra)
++{	
++	_func_enter_;
++
++	RT_TRACE(_module_rtl871x_mlme_c_, _drv_notice_, ("+rtw_wx_set_freq\n"));
++
++	_func_exit_;
++	
++	return 0;
++}
++
++static int rtw_wx_get_freq(struct net_device *dev, 
++			     struct iw_request_info *info, 
++			     union iwreq_data *wrqu, char *extra)
++{
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct	mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
++	WLAN_BSSID_EX  *pcur_bss = &pmlmepriv->cur_network.network;
++	
++	if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
++	{
++		//wrqu->freq.m = ieee80211_wlan_frequencies[pcur_bss->Configuration.DSConfig-1] * 100000;
++		wrqu->freq.m = rtw_ch2freq(pcur_bss->Configuration.DSConfig) * 100000;
++		wrqu->freq.e = 1;
++		wrqu->freq.i = pcur_bss->Configuration.DSConfig;
++
++	}
++	else{
++		wrqu->freq.m = rtw_ch2freq(padapter->mlmeextpriv.cur_channel) * 100000;
++		wrqu->freq.e = 1;
++		wrqu->freq.i = padapter->mlmeextpriv.cur_channel;
++	}
++
++	return 0;
++}
++
++static int rtw_wx_set_mode(struct net_device *dev, struct iw_request_info *a,
++			     union iwreq_data *wrqu, char *b)
++{
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	NDIS_802_11_NETWORK_INFRASTRUCTURE networkType ;
++	int ret = 0;
++	_irqL irqL;
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	_queue *queue = &pmlmepriv->scanned_queue;
++	_func_enter_;
++	
++	if(_FAIL == rtw_pwr_wakeup(padapter)) {
++		ret= -EPERM;
++		goto exit;
++	}
++
++	if (padapter->hw_init_completed==_FALSE){
++		ret = -EPERM;
++		goto exit;
++	}
++	
++	switch(wrqu->mode)
++	{
++		case IW_MODE_AUTO:
++			networkType = Ndis802_11AutoUnknown;
++			DBG_871X("set_mode = IW_MODE_AUTO\n");	
++			break;				
++		case IW_MODE_ADHOC:		
++			networkType = Ndis802_11IBSS;
++			DBG_871X("set_mode = IW_MODE_ADHOC\n");			
++			break;
++		case IW_MODE_MASTER:		
++			networkType = Ndis802_11APMode;
++			DBG_871X("set_mode = IW_MODE_MASTER\n");
++                        //rtw_setopmode_cmd(padapter, networkType);	
++			break;				
++		case IW_MODE_INFRA:
++			networkType = Ndis802_11Infrastructure;
++			DBG_871X("set_mode = IW_MODE_INFRA\n");			
++			break;
++	
++		default :
++			ret = -EINVAL;;
++			RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_err_,("\n Mode: %s is not supported  \n", iw_operation_mode[wrqu->mode]));
++			goto exit;
++	}
++	
++/*	
++	if(Ndis802_11APMode == networkType)
++	{
++		rtw_setopmode_cmd(padapter, networkType);
++	}	
++	else
++	{
++		rtw_setopmode_cmd(padapter, Ndis802_11AutoUnknown);	
++	}
++*/
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++	_enter_critical_bh(&queue->lock, &irqL);
++	if (rtw_set_802_11_infrastructure_mode(padapter, networkType) ==_FALSE){
++
++		ret = -EPERM;
++		_exit_critical_bh(&queue->lock, &irqL);
++		_exit_critical_bh(&pmlmepriv->lock, &irqL);
++		goto exit;
++
++	}
++	_exit_critical_bh(&queue->lock, &irqL);
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++	rtw_setopmode_cmd(padapter, networkType);
++
++exit:
++	
++	_func_exit_;
++	
++	return ret;
++	
++}
++
++static int rtw_wx_get_mode(struct net_device *dev, struct iw_request_info *a,
++			     union iwreq_data *wrqu, char *b)
++{
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct	mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
++	
++	RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,(" rtw_wx_get_mode \n"));
++
++	_func_enter_;
++	
++	if (check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _TRUE)
++	{
++		wrqu->mode = IW_MODE_INFRA;
++	}
++	else if  ((check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE) ||
++		       (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == _TRUE))
++		
++	{
++		wrqu->mode = IW_MODE_ADHOC;
++	}
++	else if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE)
++	{
++		wrqu->mode = IW_MODE_MASTER;
++	}
++	else
++	{
++		wrqu->mode = IW_MODE_AUTO;
++	}
++
++	_func_exit_;
++	
++	return 0;
++	
++}
++
++
++static int rtw_wx_set_pmkid(struct net_device *dev,
++	                     struct iw_request_info *a,
++			     union iwreq_data *wrqu, char *extra)
++{
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	u8          j,blInserted = _FALSE;
++	int         intReturn = _FALSE;
++	struct mlme_priv  *pmlmepriv = &padapter->mlmepriv;
++	struct security_priv *psecuritypriv = &padapter->securitypriv;
++        struct iw_pmksa*  pPMK = ( struct iw_pmksa* ) extra;
++        u8     strZeroMacAddress[ ETH_ALEN ] = { 0x00 };
++        u8     strIssueBssid[ ETH_ALEN ] = { 0x00 };
++        
++/*
++        struct iw_pmksa
++        {
++            __u32   cmd;
++            struct sockaddr bssid;
++            __u8    pmkid[IW_PMKID_LEN];   //IW_PMKID_LEN=16
++        }
++        There are the BSSID information in the bssid.sa_data array.
++        If cmd is IW_PMKSA_FLUSH, it means the wpa_suppplicant wants to clear all the PMKID information.
++        If cmd is IW_PMKSA_ADD, it means the wpa_supplicant wants to add a PMKID/BSSID to driver.
++        If cmd is IW_PMKSA_REMOVE, it means the wpa_supplicant wants to remove a PMKID/BSSID from driver.
++        */
++
++	_rtw_memcpy( strIssueBssid, pPMK->bssid.sa_data, ETH_ALEN);
++        if ( pPMK->cmd == IW_PMKSA_ADD )
++        {
++                DBG_871X( "[rtw_wx_set_pmkid] IW_PMKSA_ADD!\n" );
++                if ( _rtw_memcmp( strIssueBssid, strZeroMacAddress, ETH_ALEN ) == _TRUE )
++                {
++                    return( intReturn );
++                }
++                else
++                {
++                    intReturn = _TRUE;
++                }
++		blInserted = _FALSE;
++		
++		//overwrite PMKID
++		for(j=0 ; j<NUM_PMKID_CACHE; j++)
++		{
++			if( _rtw_memcmp( psecuritypriv->PMKIDList[j].Bssid, strIssueBssid, ETH_ALEN) ==_TRUE )
++			{ // BSSID is matched, the same AP => rewrite with new PMKID.
++                                
++                                DBG_871X( "[rtw_wx_set_pmkid] BSSID exists in the PMKList.\n" );
++
++				_rtw_memcpy( psecuritypriv->PMKIDList[j].PMKID, pPMK->pmkid, IW_PMKID_LEN);
++                                psecuritypriv->PMKIDList[ j ].bUsed = _TRUE;
++				psecuritypriv->PMKIDIndex = j+1;
++				blInserted = _TRUE;
++				break;
++			}	
++	        }
++
++	        if(!blInserted)
++                {
++		    // Find a new entry
++                    DBG_871X( "[rtw_wx_set_pmkid] Use the new entry index = %d for this PMKID.\n",
++                            psecuritypriv->PMKIDIndex );
++
++	            _rtw_memcpy(psecuritypriv->PMKIDList[psecuritypriv->PMKIDIndex].Bssid, strIssueBssid, ETH_ALEN);
++		    _rtw_memcpy(psecuritypriv->PMKIDList[psecuritypriv->PMKIDIndex].PMKID, pPMK->pmkid, IW_PMKID_LEN);
++
++                    psecuritypriv->PMKIDList[ psecuritypriv->PMKIDIndex ].bUsed = _TRUE;
++		    psecuritypriv->PMKIDIndex++ ;
++		    if(psecuritypriv->PMKIDIndex==16)
++                    {
++		        psecuritypriv->PMKIDIndex =0;
++                    }
++		}
++        }
++        else if ( pPMK->cmd == IW_PMKSA_REMOVE )
++        {
++                DBG_871X( "[rtw_wx_set_pmkid] IW_PMKSA_REMOVE!\n" );
++                intReturn = _TRUE;
++		for(j=0 ; j<NUM_PMKID_CACHE; j++)
++		{
++			if( _rtw_memcmp( psecuritypriv->PMKIDList[j].Bssid, strIssueBssid, ETH_ALEN) ==_TRUE )
++			{ // BSSID is matched, the same AP => Remove this PMKID information and reset it. 
++                                _rtw_memset( psecuritypriv->PMKIDList[ j ].Bssid, 0x00, ETH_ALEN );
++                                psecuritypriv->PMKIDList[ j ].bUsed = _FALSE;
++				break;
++			}	
++	        }
++        }
++        else if ( pPMK->cmd == IW_PMKSA_FLUSH ) 
++        {
++            DBG_871X( "[rtw_wx_set_pmkid] IW_PMKSA_FLUSH!\n" );
++            _rtw_memset( &psecuritypriv->PMKIDList[ 0 ], 0x00, sizeof( RT_PMKID_LIST ) * NUM_PMKID_CACHE );
++            psecuritypriv->PMKIDIndex = 0;
++            intReturn = _TRUE;
++        }
++    return( intReturn );
++}
++
++static int rtw_wx_get_sens(struct net_device *dev, 
++			     struct iw_request_info *info, 
++			     union iwreq_data *wrqu, char *extra)
++{
++	#ifdef CONFIG_PLATFORM_ROCKCHIPS
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv); 
++	
++	/*
++	*  20110311 Commented by Jeff
++	*  For rockchip platform's wpa_driver_wext_get_rssi
++	*/
++	if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) {
++		//wrqu->sens.value=-padapter->recvpriv.signal_strength;
++		wrqu->sens.value=-padapter->recvpriv.rssi;
++		//DBG_871X("%s: %d\n", __FUNCTION__, wrqu->sens.value);
++		wrqu->sens.fixed = 0; /* no auto select */ 
++	} else 
++	#endif
++	{
++		wrqu->sens.value = 0;
++		wrqu->sens.fixed = 0;	/* no auto select */
++		wrqu->sens.disabled = 1;
++	}
++	return 0;
++}
++
++static int rtw_wx_get_range(struct net_device *dev, 
++				struct iw_request_info *info, 
++				union iwreq_data *wrqu, char *extra)
++{
++	struct iw_range *range = (struct iw_range *)extra;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++
++	u16 val;
++	int i;
++	
++	_func_enter_;
++	
++	RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("rtw_wx_get_range. cmd_code=%x\n", info->cmd));
++
++	wrqu->data.length = sizeof(*range);
++	_rtw_memset(range, 0, sizeof(*range));
++
++	/* Let's try to keep this struct in the same order as in
++	 * linux/include/wireless.h
++	 */
++
++	/* TODO: See what values we can set, and remove the ones we can't
++	 * set, or fill them with some default data.
++	 */
++
++	/* ~5 Mb/s real (802.11b) */
++	range->throughput = 5 * 1000 * 1000;     
++
++	// TODO: Not used in 802.11b?
++//	range->min_nwid;	/* Minimal NWID we are able to set */
++	// TODO: Not used in 802.11b?
++//	range->max_nwid;	/* Maximal NWID we are able to set */
++
++        /* Old Frequency (backward compat - moved lower ) */
++//	range->old_num_channels; 
++//	range->old_num_frequency;
++//	range->old_freq[6]; /* Filler to keep "version" at the same offset */
++
++	/* signal level threshold range */
++
++	//percent values between 0 and 100.
++	range->max_qual.qual = 100;	
++	range->max_qual.level = 100;
++	range->max_qual.noise = 100;
++	range->max_qual.updated = 7; /* Updated all three */
++
++
++	range->avg_qual.qual = 92; /* > 8% missed beacons is 'bad' */
++	/* TODO: Find real 'good' to 'bad' threshol value for RSSI */
++	range->avg_qual.level = 20 + -98;
++	range->avg_qual.noise = 0;
++	range->avg_qual.updated = 7; /* Updated all three */
++
++	range->num_bitrates = RATE_COUNT;
++
++	for (i = 0; i < RATE_COUNT && i < IW_MAX_BITRATES; i++) {
++		range->bitrate[i] = rtw_rates[i];
++	}
++
++	range->min_frag = MIN_FRAG_THRESHOLD;
++	range->max_frag = MAX_FRAG_THRESHOLD;
++
++	range->pm_capa = 0;
++
++	range->we_version_compiled = WIRELESS_EXT;
++	range->we_version_source = 16;
++
++//	range->retry_capa;	/* What retry options are supported */
++//	range->retry_flags;	/* How to decode max/min retry limit */
++//	range->r_time_flags;	/* How to decode max/min retry life */
++//	range->min_retry;	/* Minimal number of retries */
++//	range->max_retry;	/* Maximal number of retries */
++//	range->min_r_time;	/* Minimal retry lifetime */
++//	range->max_r_time;	/* Maximal retry lifetime */
++
++	for (i = 0, val = 0; i < MAX_CHANNEL_NUM; i++) {
++
++		// Include only legal frequencies for some countries
++		if(pmlmeext->channel_set[i].ChannelNum != 0)
++		{
++			range->freq[val].i = pmlmeext->channel_set[i].ChannelNum;
++			range->freq[val].m = rtw_ch2freq(pmlmeext->channel_set[i].ChannelNum) * 100000;
++			range->freq[val].e = 1;
++			val++;
++		}
++
++		if (val == IW_MAX_FREQUENCIES)
++			break;
++	}
++
++	range->num_channels = val;
++	range->num_frequency = val;
++
++// Commented by Albert 2009/10/13
++// The following code will proivde the security capability to network manager.
++// If the driver doesn't provide this capability to network manager,
++// the WPA/WPA2 routers can't be choosen in the network manager.
++
++/*
++#define IW_SCAN_CAPA_NONE		0x00
++#define IW_SCAN_CAPA_ESSID		0x01
++#define IW_SCAN_CAPA_BSSID		0x02
++#define IW_SCAN_CAPA_CHANNEL	0x04
++#define IW_SCAN_CAPA_MODE		0x08
++#define IW_SCAN_CAPA_RATE		0x10
++#define IW_SCAN_CAPA_TYPE		0x20
++#define IW_SCAN_CAPA_TIME		0x40
++*/
++
++#if WIRELESS_EXT > 17
++	range->enc_capa = IW_ENC_CAPA_WPA|IW_ENC_CAPA_WPA2|
++			  IW_ENC_CAPA_CIPHER_TKIP|IW_ENC_CAPA_CIPHER_CCMP;
++#endif
++
++#ifdef IW_SCAN_CAPA_ESSID //WIRELESS_EXT > 21
++	range->scan_capa = IW_SCAN_CAPA_ESSID | IW_SCAN_CAPA_TYPE |IW_SCAN_CAPA_BSSID|
++					IW_SCAN_CAPA_CHANNEL|IW_SCAN_CAPA_MODE|IW_SCAN_CAPA_RATE;
++#endif
++
++
++	_func_exit_;
++
++	return 0;
++
++}
++
++//set bssid flow
++//s1. rtw_set_802_11_infrastructure_mode()
++//s2. rtw_set_802_11_authentication_mode()
++//s3. set_802_11_encryption_mode()
++//s4. rtw_set_802_11_bssid()
++static int rtw_wx_set_wap(struct net_device *dev,
++			 struct iw_request_info *info,
++			 union iwreq_data *awrq,
++			 char *extra)
++{
++	_irqL	irqL;
++	uint ret = 0;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct sockaddr *temp = (struct sockaddr *)awrq;
++	struct	mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
++	_list	*phead;
++	u8 *dst_bssid, *src_bssid;
++	_queue	*queue	= &(pmlmepriv->scanned_queue);
++	struct	wlan_network	*pnetwork = NULL;
++	NDIS_802_11_AUTHENTICATION_MODE	authmode;
++	
++	_func_enter_;
++/*
++#ifdef CONFIG_CONCURRENT_MODE
++	if(padapter->iface_type > PRIMARY_IFACE)
++	{
++		ret = -EINVAL;
++		goto exit;
++	}
++#endif	
++*/	
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if (check_buddy_fwstate(padapter, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == _TRUE)
++	{		
++		printk("set bssid, but buddy_intf is under scanning or linking\n");
++
++		ret = -EINVAL;
++		
++		goto exit;
++	}
++#endif
++
++#ifdef CONFIG_DUALMAC_CONCURRENT
++	if (dc_check_fwstate(padapter, _FW_UNDER_SURVEY|_FW_UNDER_LINKING)== _TRUE)
++	{
++		printk("set bssid, but buddy_intf is under scanning or linking\n");
++		ret = -EINVAL;
++		goto exit;
++	}
++#endif
++
++	if(_FAIL == rtw_pwr_wakeup(padapter))
++	{
++		ret= -1;
++		goto exit;
++	}
++	
++	if(!padapter->bup){
++		ret = -1;
++		goto exit;
++	}
++
++	
++	if (temp->sa_family != ARPHRD_ETHER){
++		ret = -EINVAL;
++		goto exit;
++	}
++
++	authmode = padapter->securitypriv.ndisauthtype;
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++	_enter_critical_bh(&queue->lock, &irqL);
++       phead = get_list_head(queue);
++       pmlmepriv->pscanned = get_next(phead);
++
++	while (1)
++	 {
++			
++		if ((rtw_end_of_queue_search(phead, pmlmepriv->pscanned)) == _TRUE)
++		{
++#if 0		
++			ret = -EINVAL;
++			goto exit;
++
++			if(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == _TRUE)
++			{
++	            		rtw_set_802_11_bssid(padapter, temp->sa_data);
++	    			goto exit;                    
++			}
++			else
++			{
++				ret = -EINVAL;
++				goto exit;
++			}
++#endif
++
++			break;
++		}
++	
++		pnetwork = LIST_CONTAINOR(pmlmepriv->pscanned, struct wlan_network, list);
++
++		pmlmepriv->pscanned = get_next(pmlmepriv->pscanned);
++
++		dst_bssid = pnetwork->network.MacAddress;
++
++		src_bssid = temp->sa_data;
++
++		if ((_rtw_memcmp(dst_bssid, src_bssid, ETH_ALEN)) == _TRUE)
++		{			
++			if(!rtw_set_802_11_infrastructure_mode(padapter, pnetwork->network.InfrastructureMode))
++			{
++				ret = -1;
++				_exit_critical_bh(&queue->lock, &irqL);
++				_exit_critical_bh(&pmlmepriv->lock, &irqL);
++				goto exit;
++			}
++
++				break;			
++		}
++
++	}		
++	_exit_critical_bh(&queue->lock, &irqL);
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++	rtw_set_802_11_authentication_mode(padapter, authmode);
++	//set_802_11_encryption_mode(padapter, padapter->securitypriv.ndisencryptstatus);
++	if (rtw_set_802_11_bssid(padapter, temp->sa_data) == _FALSE) {
++		ret = -1;
++		goto exit;		
++	}	
++	
++exit:
++	
++	_func_exit_;
++	
++	return ret;	
++}
++
++static int rtw_wx_get_wap(struct net_device *dev, 
++			    struct iw_request_info *info, 
++			    union iwreq_data *wrqu, char *extra)
++{
++
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct	mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
++	WLAN_BSSID_EX  *pcur_bss = &pmlmepriv->cur_network.network;	
++	
++	wrqu->ap_addr.sa_family = ARPHRD_ETHER;
++	
++	_rtw_memset(wrqu->ap_addr.sa_data, 0, ETH_ALEN);
++	
++	RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("rtw_wx_get_wap\n"));
++
++	_func_enter_;
++
++	if  ( ((check_fwstate(pmlmepriv, _FW_LINKED)) == _TRUE) || 
++			((check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE)) == _TRUE) ||
++			((check_fwstate(pmlmepriv, WIFI_AP_STATE)) == _TRUE) )
++	{
++
++		_rtw_memcpy(wrqu->ap_addr.sa_data, pcur_bss->MacAddress, ETH_ALEN);
++	}
++	else
++	{
++	 	_rtw_memset(wrqu->ap_addr.sa_data, 0, ETH_ALEN);
++	}		
++
++	_func_exit_;
++	
++	return 0;
++	
++}
++
++static int rtw_wx_set_mlme(struct net_device *dev, 
++			     struct iw_request_info *info, 
++			     union iwreq_data *wrqu, char *extra)
++{
++#if 0
++/* SIOCSIWMLME data */
++struct	iw_mlme
++{
++	__u16		cmd; /* IW_MLME_* */
++	__u16		reason_code;
++	struct sockaddr	addr;
++};
++#endif
++
++	int ret=0;
++	u16 reason;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct iw_mlme *mlme = (struct iw_mlme *) extra;
++	
++
++	if(mlme==NULL)
++		return -1;
++
++	printk("%s\n", __FUNCTION__);
++
++	reason = cpu_to_le16(mlme->reason_code);
++
++
++	printk("%s, cmd=%d, reason=%d\n", __FUNCTION__, mlme->cmd, reason);
++
++	switch (mlme->cmd) 
++	{
++		case IW_MLME_DEAUTH:			
++				if(!rtw_set_802_11_disassociate(padapter))
++				ret = -1;						
++				break;
++				
++		case IW_MLME_DISASSOC:			
++				if(!rtw_set_802_11_disassociate(padapter))
++						ret = -1;		
++				
++				break;
++				
++		default:
++			return -EOPNOTSUPP;
++	}
++	
++	return ret;
++	
++}
++
++static int rtw_wx_set_scan(struct net_device *dev, struct iw_request_info *a,
++			     union iwreq_data *wrqu, char *extra)
++{
++	u8 _status = _FALSE;
++	int ret = 0;	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_priv *pmlmepriv= &padapter->mlmepriv;
++	NDIS_802_11_SSID ssid[RTW_SSID_SCAN_AMOUNT];
++	_irqL	irqL;
++#ifdef CONFIG_P2P
++	struct wifidirect_info *pwdinfo= &(padapter->wdinfo);	
++#endif //CONFIG_P2P
++	RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("rtw_wx_set_scan\n"));
++
++_func_enter_;
++
++	#ifdef DBG_IOCTL
++	DBG_871X("DBG_IOCTL %s:%d\n",__FUNCTION__, __LINE__);
++	#endif
++/*
++#ifdef CONFIG_CONCURRENT_MODE
++	if(padapter->iface_type > PRIMARY_IFACE)
++	{
++		ret = -1;
++		goto exit;
++	}
++#endif
++*/
++
++#ifdef CONFIG_MP_INCLUDED
++	if (check_fwstate(pmlmepriv, WIFI_MP_STATE) == _TRUE)
++	{
++		ret = -1;
++		goto exit;
++	}
++#endif
++
++	if(_FAIL == rtw_pwr_wakeup(padapter))
++	{
++		ret= -1;
++		goto exit;
++	}
++
++	if(padapter->bDriverStopped){
++           DBG_871X("bDriverStopped=%d\n", padapter->bDriverStopped);
++		ret= -1;
++		goto exit;
++	}
++	
++	if(!padapter->bup){
++		ret = -1;
++		goto exit;
++	}
++	
++	if (padapter->hw_init_completed==_FALSE){
++		ret = -1;
++		goto exit;
++	}
++
++	// When Busy Traffic, driver do not site survey. So driver return success.
++	// wpa_supplicant will not issue SIOCSIWSCAN cmd again after scan timeout.
++	// modify by thomas 2011-02-22.
++	if (pmlmepriv->LinkDetectInfo.bBusyTraffic == _TRUE)
++	{
++		indicate_wx_scan_complete_event(padapter);
++		goto exit;
++	} 
++
++	if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == _TRUE)
++	{
++		indicate_wx_scan_complete_event(padapter);
++		goto exit;
++	} 
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if (check_buddy_fwstate(padapter,
++		_FW_UNDER_SURVEY|_FW_UNDER_LINKING|WIFI_UNDER_WPS) == _TRUE)
++	{		
++		if(check_buddy_fwstate(padapter, _FW_UNDER_SURVEY))
++		{
++			printk("scanning_via_buddy_intf\n");
++			pmlmepriv->scanning_via_buddy_intf = _TRUE;
++		}		
++
++		indicate_wx_scan_complete_event(padapter);
++		
++		goto exit;
++	}
++#endif
++
++#ifdef CONFIG_DUALMAC_CONCURRENT
++	if (dc_check_fwstate(padapter, _FW_UNDER_SURVEY|_FW_UNDER_LINKING)== _TRUE)
++	{
++		indicate_wx_scan_complete_event(padapter);
++		goto exit;
++	}
++#endif
++
++//	Mareded by Albert 20101103
++//	For the DMP WiFi Display project, the driver won't to scan because
++//	the pmlmepriv->scan_interval is always equal to 3.
++//	So, the wpa_supplicant won't find out the WPS SoftAP.
++
++/*
++	if(pmlmepriv->scan_interval>10)
++		pmlmepriv->scan_interval = 0;
++
++	if(pmlmepriv->scan_interval > 0)
++	{
++		DBG_871X("scan done\n");
++		ret = 0;
++		goto exit;
++	}
++		
++*/
++#ifdef CONFIG_P2P
++	if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++	{
++		rtw_p2p_set_pre_state( pwdinfo, rtw_p2p_state( pwdinfo ) );
++		rtw_p2p_set_state(pwdinfo, P2P_STATE_FIND_PHASE_SEARCH);
++		rtw_p2p_findphase_ex_set(pwdinfo, P2P_FINDPHASE_EX_FULL);
++		rtw_free_network_queue(padapter, _TRUE);
++	}
++#endif //CONFIG_P2P
++
++	_rtw_memset(ssid, 0, sizeof(NDIS_802_11_SSID)*RTW_SSID_SCAN_AMOUNT);
++
++#if WIRELESS_EXT >= 17
++	if (wrqu->data.length == sizeof(struct iw_scan_req)) 
++	{
++		struct iw_scan_req *req = (struct iw_scan_req *)extra;
++	
++		if (wrqu->data.flags & IW_SCAN_THIS_ESSID)
++		{
++			int len = min((int)req->essid_len, IW_ESSID_MAX_SIZE);
++
++			_rtw_memcpy(ssid[0].Ssid, req->essid, len);
++			ssid[0].SsidLength = len;	
++
++			DBG_871X("IW_SCAN_THIS_ESSID, ssid=%s, len=%d\n", req->essid, req->essid_len);
++		
++			_enter_critical_bh(&pmlmepriv->lock, &irqL);				
++		
++			_status = rtw_sitesurvey_cmd(padapter, ssid, 1, NULL, 0);
++		
++			_exit_critical_bh(&pmlmepriv->lock, &irqL);
++			
++		}
++		else if (req->scan_type == IW_SCAN_TYPE_PASSIVE)
++		{
++			DBG_871X("rtw_wx_set_scan, req->scan_type == IW_SCAN_TYPE_PASSIVE\n");
++		}
++		
++	}
++	else
++#endif
++
++	if(	wrqu->data.length >= WEXT_CSCAN_HEADER_SIZE
++		&& _rtw_memcmp(extra, WEXT_CSCAN_HEADER, WEXT_CSCAN_HEADER_SIZE) == _TRUE
++	)
++	{
++		int len = wrqu->data.length -WEXT_CSCAN_HEADER_SIZE;
++		char *pos = extra+WEXT_CSCAN_HEADER_SIZE;
++		char section;
++		char sec_len;
++		int ssid_index = 0;
++
++		//DBG_871X("%s COMBO_SCAN header is recognized\n", __FUNCTION__);
++		
++		while(len >= 1) {
++			section = *(pos++); len-=1;
++
++			switch(section) {
++				case WEXT_CSCAN_SSID_SECTION:
++					//DBG_871X("WEXT_CSCAN_SSID_SECTION\n");
++					if(len < 1) {
++						len = 0;
++						break;
++					}
++					
++					sec_len = *(pos++); len-=1;
++
++					if(sec_len>0 && sec_len<=len) {
++						ssid[ssid_index].SsidLength = sec_len;
++						_rtw_memcpy(ssid[ssid_index].Ssid, pos, ssid[ssid_index].SsidLength);
++						//DBG_871X("%s COMBO_SCAN with specific ssid:%s, %d\n", __FUNCTION__
++						//	, ssid[ssid_index].Ssid, ssid[ssid_index].SsidLength);
++						ssid_index++;
++					}
++					
++					pos+=sec_len; len-=sec_len;
++					break;
++					
++				
++				case WEXT_CSCAN_CHANNEL_SECTION:
++					//DBG_871X("WEXT_CSCAN_CHANNEL_SECTION\n");
++					pos+=1; len-=1;
++					break;
++				case WEXT_CSCAN_ACTV_DWELL_SECTION:
++					//DBG_871X("WEXT_CSCAN_ACTV_DWELL_SECTION\n");
++					pos+=2; len-=2;
++					break;
++				case WEXT_CSCAN_PASV_DWELL_SECTION:
++					//DBG_871X("WEXT_CSCAN_PASV_DWELL_SECTION\n");
++					pos+=2; len-=2;					
++					break;
++				case WEXT_CSCAN_HOME_DWELL_SECTION:
++					//DBG_871X("WEXT_CSCAN_HOME_DWELL_SECTION\n");
++					pos+=2; len-=2;
++					break;
++				case WEXT_CSCAN_TYPE_SECTION:
++					//DBG_871X("WEXT_CSCAN_TYPE_SECTION\n");
++					pos+=1; len-=1;
++					break;
++				#if 0
++				case WEXT_CSCAN_NPROBE_SECTION:
++					DBG_871X("WEXT_CSCAN_NPROBE_SECTION\n");
++					break;
++				#endif
++				
++				default:
++					//DBG_871X("Unknown CSCAN section %c\n", section);
++					len = 0; // stop parsing
++			}
++			//DBG_871X("len:%d\n", len);
++			
++		}
++		
++		//jeff: it has still some scan paramater to parse, we only do this now...
++		_status = rtw_set_802_11_bssid_list_scan(padapter, ssid, RTW_SSID_SCAN_AMOUNT);
++		
++	} else
++	
++	{
++		_status = rtw_set_802_11_bssid_list_scan(padapter, NULL, 0);
++	}
++
++	if(_status == _FALSE)
++		ret = -1;
++
++exit:
++	#ifdef DBG_IOCTL
++	DBG_871X("DBG_IOCTL %s:%d return %d\n",__FUNCTION__, __LINE__, ret);
++	#endif
++
++_func_exit_;
++
++	return ret;	
++}
++
++static int rtw_wx_get_scan(struct net_device *dev, struct iw_request_info *a,
++			     union iwreq_data *wrqu, char *extra)
++{
++	_irqL	irqL;
++	_list					*plist, *phead;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct	mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
++	_queue				*queue	= &(pmlmepriv->scanned_queue);	
++	struct	wlan_network	*pnetwork = NULL;
++	char *ev = extra;
++	char *stop = ev + wrqu->data.length;
++	u32 ret = 0;	
++	u32 cnt=0;
++	u32 wait_for_surveydone;
++	sint wait_status;
++#ifdef CONFIG_CONCURRENT_MODE	
++	//PADAPTER pbuddy_adapter = padapter->pbuddy_adapter;
++	//struct mlme_priv *pbuddy_mlmepriv = &(pbuddy_adapter->mlmepriv);	
++#endif	
++#ifdef CONFIG_P2P
++	struct	wifidirect_info*	pwdinfo = &padapter->wdinfo;
++#endif //CONFIG_P2P
++	RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("rtw_wx_get_scan\n"));
++	RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_info_, (" Start of Query SIOCGIWSCAN .\n"));
++
++	_func_enter_;
++	
++	#ifdef DBG_IOCTL
++	DBG_871X("DBG_IOCTL %s:%d\n",__FUNCTION__, __LINE__);
++	#endif
++	
++/*
++#ifdef CONFIG_CONCURRENT_MODE
++	if(padapter->iface_type > PRIMARY_IFACE)
++	{
++		ret = -EINVAL;
++		goto exit;
++	}
++#endif
++*/	
++	if(padapter->pwrctrlpriv.brfoffbyhw && padapter->bDriverStopped)
++	{
++		ret = -EINVAL;
++		goto exit;
++	}
++  
++#ifdef CONFIG_P2P
++	if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++	{
++		//	P2P is enabled
++		if ( padapter->chip_type == RTL8192D )
++			wait_for_surveydone = 300;	//	Because the 8192du supports more channels.
++		else
++			wait_for_surveydone = 200;
++	}
++	else
++	{
++		//	P2P is disabled
++		wait_for_surveydone = 100;
++	}
++#else
++	{
++		wait_for_surveydone = 100;
++	}
++#endif //CONFIG_P2P
++
++/*
++#ifdef CONFIG_CONCURRENT_MODE	
++	if(pmlmepriv->scanning_via_buddy_intf == _TRUE)
++	{
++		pmlmepriv->scanning_via_buddy_intf = _FALSE;//reset
++
++		// change pointers to buddy interface
++		padapter = pbuddy_adapter;
++		pmlmepriv = pbuddy_mlmepriv;
++		queue = &(pbuddy_mlmepriv->scanned_queue);		
++		
++	}
++#endif // CONFIG_CONCURRENT_MODE			
++*/
++
++	wait_status = _FW_UNDER_SURVEY
++		#ifndef CONFIG_ANDROID
++		|_FW_UNDER_LINKING
++		#endif
++	;
++
++#ifdef CONFIG_DUALMAC_CONCURRENT
++	while(dc_check_fwstate(padapter, wait_status)== _TRUE)
++	{
++		rtw_msleep_os(30);
++		cnt++;
++		if(cnt > wait_for_surveydone )
++			break;
++	}
++#endif // CONFIG_DUALMAC_CONCURRENT
++
++ 	while(check_fwstate(pmlmepriv, wait_status) == _TRUE)
++	{	
++		rtw_msleep_os(30);
++		cnt++;
++		if(cnt > wait_for_surveydone )
++			break;
++	}
++
++	_enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++
++	phead = get_list_head(queue);
++	plist = get_next(phead);
++       
++	while(1)
++	{
++		if (rtw_end_of_queue_search(phead,plist)== _TRUE)
++			break;
++
++		if((stop - ev) < SCAN_ITEM_SIZE) {
++			ret = -E2BIG;
++			break;
++		}
++
++		pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list);
++
++		//report network only if the current channel set contains the channel to which this network belongs
++		if(rtw_ch_set_search_ch(padapter->mlmeextpriv.channel_set, pnetwork->network.Configuration.DSConfig) >= 0
++			&& rtw_mlme_band_check(padapter, pnetwork->network.Configuration.DSConfig) == _TRUE
++			&& _TRUE == rtw_validate_ssid(&(pnetwork->network.Ssid))
++		)
++		{
++			ev=translate_scan(padapter, a, pnetwork, ev, stop);
++		}
++
++		plist = get_next(plist);
++	
++	}        
++
++	_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++
++       wrqu->data.length = ev-extra;
++	wrqu->data.flags = 0;
++	
++exit:		
++	
++	_func_exit_;	
++	
++	#ifdef DBG_IOCTL
++	DBG_871X("DBG_IOCTL %s:%d return %d\n",__FUNCTION__, __LINE__, ret);
++	#endif
++	
++	return ret ;
++	
++}
++
++//set ssid flow
++//s1. rtw_set_802_11_infrastructure_mode()
++//s2. set_802_11_authenticaion_mode()
++//s3. set_802_11_encryption_mode()
++//s4. rtw_set_802_11_ssid()
++static int rtw_wx_set_essid(struct net_device *dev, 
++			      struct iw_request_info *a,
++			      union iwreq_data *wrqu, char *extra)
++{
++	_irqL irqL;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	_queue *queue = &pmlmepriv->scanned_queue;
++	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
++	_list *phead;
++	s8 status = _TRUE;
++	struct wlan_network *pnetwork = NULL;
++	NDIS_802_11_AUTHENTICATION_MODE authmode;	
++	NDIS_802_11_SSID ndis_ssid;	
++	u8 *dst_ssid, *src_ssid;
++
++	uint ret = 0, len;
++
++	_func_enter_;
++	
++	#ifdef DBG_IOCTL
++	DBG_871X("DBG_IOCTL %s:%d\n",__FUNCTION__, __LINE__);
++	#endif
++	
++/*
++#ifdef CONFIG_CONCURRENT_MODE
++	if(padapter->iface_type > PRIMARY_IFACE)
++	{
++		ret = -EINVAL;
++		goto exit;
++	}
++#endif
++*/
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if (check_buddy_fwstate(padapter, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == _TRUE)
++	{		
++		printk("set ssid, but buddy_intf is under scanning or linking\n");
++		
++		ret = -EINVAL;
++		
++		goto exit;
++	}
++#endif
++
++#ifdef CONFIG_DUALMAC_CONCURRENT
++	if (dc_check_fwstate(padapter, _FW_UNDER_SURVEY|_FW_UNDER_LINKING)== _TRUE)
++	{
++		printk("set bssid, but buddy_intf is under scanning or linking\n");
++		ret = -EINVAL;
++		goto exit;
++	}
++#endif
++
++	RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_info_,
++		 ("+rtw_wx_set_essid: fw_state=0x%08x\n", get_fwstate(pmlmepriv)));
++	if(_FAIL == rtw_pwr_wakeup(padapter))
++	{		
++		ret = -1;
++		goto exit;
++	}
++
++	if(!padapter->bup){
++		ret = -1;
++		goto exit;
++	}
++
++#if WIRELESS_EXT <= 20
++	if ((wrqu->essid.length-1) > IW_ESSID_MAX_SIZE){
++#else
++	if (wrqu->essid.length > IW_ESSID_MAX_SIZE){
++#endif
++		ret= -E2BIG;
++		goto exit;
++	}
++	
++	if(check_fwstate(pmlmepriv, WIFI_AP_STATE)) {
++		ret = -1;
++		goto exit;
++	}		
++	
++	authmode = padapter->securitypriv.ndisauthtype;
++	DBG_871X("=>%s\n",__FUNCTION__);
++	if (wrqu->essid.flags && wrqu->essid.length)
++	{
++		// Commented by Albert 20100519
++		// We got the codes in "set_info" function of iwconfig source code.
++		//	=========================================
++		//	wrq.u.essid.length = strlen(essid) + 1;
++	  	//	if(we_kernel_version > 20)
++		//		wrq.u.essid.length--;
++		//	=========================================
++		//	That means, if the WIRELESS_EXT less than or equal to 20, the correct ssid len should subtract 1.
++#if WIRELESS_EXT <= 20
++		len = ((wrqu->essid.length-1) < IW_ESSID_MAX_SIZE) ? (wrqu->essid.length-1) : IW_ESSID_MAX_SIZE;
++#else
++		len = (wrqu->essid.length < IW_ESSID_MAX_SIZE) ? wrqu->essid.length : IW_ESSID_MAX_SIZE;
++#endif
++
++		if( wrqu->essid.length != 33 )
++			DBG_871X("ssid=%s, len=%d\n", extra, wrqu->essid.length);
++
++		_rtw_memset(&ndis_ssid, 0, sizeof(NDIS_802_11_SSID));
++		ndis_ssid.SsidLength = len;
++		_rtw_memcpy(ndis_ssid.Ssid, extra, len);		
++		src_ssid = ndis_ssid.Ssid;
++		
++		RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_info_, ("rtw_wx_set_essid: ssid=[%s]\n", src_ssid));
++		_enter_critical_bh(&pmlmepriv->lock, &irqL);
++		_enter_critical_bh(&queue->lock, &irqL);
++	       phead = get_list_head(queue);
++              pmlmepriv->pscanned = get_next(phead);
++
++		while (1)
++		{			
++			if (rtw_end_of_queue_search(phead, pmlmepriv->pscanned) == _TRUE)
++			{
++#if 0			
++				if(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == _TRUE)
++				{
++	            			rtw_set_802_11_ssid(padapter, &ndis_ssid);
++
++		    			goto exit;                    
++				}
++				else
++				{
++					RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_info_,("rtw_wx_set_ssid(): scanned_queue is empty\n"));
++					ret = -EINVAL;
++					goto exit;
++				}
++#endif			
++			        RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_warning_,
++					 ("rtw_wx_set_essid: scan_q is empty, set ssid to check if scanning again!\n"));
++
++				break;
++			}
++	
++			pnetwork = LIST_CONTAINOR(pmlmepriv->pscanned, struct wlan_network, list);
++
++			pmlmepriv->pscanned = get_next(pmlmepriv->pscanned);
++
++			dst_ssid = pnetwork->network.Ssid.Ssid;
++
++			RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_info_,
++				 ("rtw_wx_set_essid: dst_ssid=%s\n",
++				  pnetwork->network.Ssid.Ssid));
++
++			if ((_rtw_memcmp(dst_ssid, src_ssid, ndis_ssid.SsidLength) == _TRUE) &&
++				(pnetwork->network.Ssid.SsidLength==ndis_ssid.SsidLength))
++			{
++				RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_info_,
++					 ("rtw_wx_set_essid: find match, set infra mode\n"));
++				
++				if(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == _TRUE)
++				{
++					if(pnetwork->network.InfrastructureMode != pmlmepriv->cur_network.network.InfrastructureMode)
++						continue;
++				}	
++					
++				if (rtw_set_802_11_infrastructure_mode(padapter, pnetwork->network.InfrastructureMode) == _FALSE)
++				{
++					ret = -1;
++					_exit_critical_bh(&queue->lock, &irqL);
++					_exit_critical_bh(&pmlmepriv->lock, &irqL);
++					goto exit;
++				}
++
++				break;			
++			}
++		}
++		_exit_critical_bh(&queue->lock, &irqL);
++		_exit_critical_bh(&pmlmepriv->lock, &irqL);
++		RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_info_,
++			 ("set ssid: set_802_11_auth. mode=%d\n", authmode));
++		rtw_set_802_11_authentication_mode(padapter, authmode);
++		//set_802_11_encryption_mode(padapter, padapter->securitypriv.ndisencryptstatus);
++		if (rtw_set_802_11_ssid(padapter, &ndis_ssid) == _FALSE) {
++			ret = -1;
++			goto exit;
++		}	
++	}			
++	
++exit:
++
++	DBG_871X("<=%s, ret %d\n",__FUNCTION__, ret);
++	
++	#ifdef DBG_IOCTL
++	DBG_871X("DBG_IOCTL %s:%d return %d\n",__FUNCTION__, __LINE__, ret);
++	#endif
++	
++	_func_exit_;
++	
++	return ret;	
++}
++
++static int rtw_wx_get_essid(struct net_device *dev, 
++			      struct iw_request_info *a,
++			      union iwreq_data *wrqu, char *extra)
++{
++	u32 len,ret = 0;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct	mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
++	WLAN_BSSID_EX  *pcur_bss = &pmlmepriv->cur_network.network;
++
++	RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,("rtw_wx_get_essid\n"));
++
++	_func_enter_;
++
++	if ( (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) ||
++	      (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE))
++	{
++		len = pcur_bss->Ssid.SsidLength;
++
++		wrqu->essid.length = len;
++			
++		_rtw_memcpy(extra, pcur_bss->Ssid.Ssid, len);
++
++		wrqu->essid.flags = 1;
++	}
++	else
++	{
++		ret = -1;
++		goto exit;
++	}
++
++exit:
++	
++	_func_exit_;
++	
++	return ret;
++	
++}
++
++static int rtw_wx_set_rate(struct net_device *dev, 
++			      struct iw_request_info *a,
++			      union iwreq_data *wrqu, char *extra)
++{
++	int	i, ret = 0;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	u8	datarates[NumRates];
++	u32	target_rate = wrqu->bitrate.value;
++	u32	fixed = wrqu->bitrate.fixed;
++	u32	ratevalue = 0;
++	 u8 mpdatarate[NumRates]={11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0, 0xff};
++
++_func_enter_;
++
++	RT_TRACE(_module_rtl871x_mlme_c_,_drv_info_,(" rtw_wx_set_rate \n"));
++	RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_info_,("target_rate = %d, fixed = %d\n",target_rate,fixed));
++	
++	if(target_rate == -1){
++		ratevalue = 11;
++		goto set_rate;
++	}
++	target_rate = target_rate/100000;
++
++	switch(target_rate){
++		case 10:
++			ratevalue = 0;
++			break;
++		case 20:
++			ratevalue = 1;
++			break;
++		case 55:
++			ratevalue = 2;
++			break;
++		case 60:
++			ratevalue = 3;
++			break;
++		case 90:
++			ratevalue = 4;
++			break;
++		case 110:
++			ratevalue = 5;
++			break;
++		case 120:
++			ratevalue = 6;
++			break;
++		case 180:
++			ratevalue = 7;
++			break;
++		case 240:
++			ratevalue = 8;
++			break;
++		case 360:
++			ratevalue = 9;
++			break;
++		case 480:
++			ratevalue = 10;
++			break;
++		case 540:
++			ratevalue = 11;
++			break;
++		default:
++			ratevalue = 11;
++			break;
++	}
++
++set_rate:
++
++	for(i=0; i<NumRates; i++)
++	{
++		if(ratevalue==mpdatarate[i])
++		{
++			datarates[i] = mpdatarate[i];
++			if(fixed == 0)
++				break;
++		}
++		else{
++			datarates[i] = 0xff;
++		}
++
++		RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_info_,("datarate_inx=%d\n",datarates[i]));
++	}
++
++	if( rtw_setdatarate_cmd(padapter, datarates) !=_SUCCESS){
++		RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_err_,("rtw_wx_set_rate Fail!!!\n"));
++		ret = -1;
++	}
++
++_func_exit_;
++
++	return ret;
++}
++
++static int rtw_wx_get_rate(struct net_device *dev, 
++			     struct iw_request_info *info, 
++			     union iwreq_data *wrqu, char *extra)
++{	
++	u16 max_rate = 0;
++
++	max_rate = rtw_get_cur_max_rate((_adapter *)rtw_netdev_priv(dev));
++
++	if(max_rate == 0)
++		return -EPERM;
++	
++	wrqu->bitrate.fixed = 0;	/* no auto select */
++	wrqu->bitrate.value = max_rate * 100000;
++
++	return 0;
++}
++
++static int rtw_wx_set_rts(struct net_device *dev, 
++			     struct iw_request_info *info, 
++			     union iwreq_data *wrqu, char *extra)
++{
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++
++	_func_enter_;
++	
++	if (wrqu->rts.disabled)
++		padapter->registrypriv.rts_thresh = 2347;
++	else {
++		if (wrqu->rts.value < 0 ||
++		    wrqu->rts.value > 2347)
++			return -EINVAL;
++		
++		padapter->registrypriv.rts_thresh = wrqu->rts.value;
++	}
++
++	DBG_871X("%s, rts_thresh=%d\n", __func__, padapter->registrypriv.rts_thresh);
++	
++	_func_exit_;
++	
++	return 0;
++
++}
++
++static int rtw_wx_get_rts(struct net_device *dev, 
++			     struct iw_request_info *info, 
++			     union iwreq_data *wrqu, char *extra)
++{
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	
++	_func_enter_;
++
++	DBG_871X("%s, rts_thresh=%d\n", __func__, padapter->registrypriv.rts_thresh);	
++	
++	wrqu->rts.value = padapter->registrypriv.rts_thresh;
++	wrqu->rts.fixed = 0;	/* no auto select */
++	//wrqu->rts.disabled = (wrqu->rts.value == DEFAULT_RTS_THRESHOLD);
++	
++	_func_exit_;
++	
++	return 0;
++}
++
++static int rtw_wx_set_frag(struct net_device *dev, 
++			     struct iw_request_info *info, 
++			     union iwreq_data *wrqu, char *extra)
++{
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++
++	_func_enter_;
++	
++	if (wrqu->frag.disabled)
++		padapter->xmitpriv.frag_len = MAX_FRAG_THRESHOLD;
++	else {
++		if (wrqu->frag.value < MIN_FRAG_THRESHOLD ||
++		    wrqu->frag.value > MAX_FRAG_THRESHOLD)
++			return -EINVAL;
++		
++		padapter->xmitpriv.frag_len = wrqu->frag.value & ~0x1;
++	}
++
++	DBG_871X("%s, frag_len=%d\n", __func__, padapter->xmitpriv.frag_len);
++	
++	_func_exit_;
++	
++	return 0;
++	
++}
++
++static int rtw_wx_get_frag(struct net_device *dev, 
++			     struct iw_request_info *info, 
++			     union iwreq_data *wrqu, char *extra)
++{
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	
++	_func_enter_;
++
++	DBG_871X("%s, frag_len=%d\n", __func__, padapter->xmitpriv.frag_len);
++	
++	wrqu->frag.value = padapter->xmitpriv.frag_len;
++	wrqu->frag.fixed = 0;	/* no auto select */
++	//wrqu->frag.disabled = (wrqu->frag.value == DEFAULT_FRAG_THRESHOLD);
++	
++	_func_exit_;
++	
++	return 0;
++}
++
++static int rtw_wx_get_retry(struct net_device *dev, 
++			     struct iw_request_info *info, 
++			     union iwreq_data *wrqu, char *extra)
++{
++	//_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++
++	
++	wrqu->retry.value = 7;
++	wrqu->retry.fixed = 0;	/* no auto select */
++	wrqu->retry.disabled = 1;
++	
++	return 0;
++
++}	
++
++#if 0
++#define IW_ENCODE_INDEX		0x00FF	/* Token index (if needed) */
++#define IW_ENCODE_FLAGS		0xFF00	/* Flags defined below */
++#define IW_ENCODE_MODE		0xF000	/* Modes defined below */
++#define IW_ENCODE_DISABLED	0x8000	/* Encoding disabled */
++#define IW_ENCODE_ENABLED	0x0000	/* Encoding enabled */
++#define IW_ENCODE_RESTRICTED	0x4000	/* Refuse non-encoded packets */
++#define IW_ENCODE_OPEN		0x2000	/* Accept non-encoded packets */
++#define IW_ENCODE_NOKEY		0x0800  /* Key is write only, so not present */
++#define IW_ENCODE_TEMP		0x0400  /* Temporary key */
++/*
++iwconfig wlan0 key on -> flags = 0x6001 -> maybe it means auto
++iwconfig wlan0 key off -> flags = 0x8800
++iwconfig wlan0 key open -> flags = 0x2800
++iwconfig wlan0 key open 1234567890 -> flags = 0x2000
++iwconfig wlan0 key restricted -> flags = 0x4800
++iwconfig wlan0 key open [3] 1234567890 -> flags = 0x2003
++iwconfig wlan0 key restricted [2] 1234567890 -> flags = 0x4002
++iwconfig wlan0 key open [3] -> flags = 0x2803
++iwconfig wlan0 key restricted [2] -> flags = 0x4802
++*/
++#endif
++
++static int rtw_wx_set_enc(struct net_device *dev, 
++			    struct iw_request_info *info, 
++			    union iwreq_data *wrqu, char *keybuf)
++{	
++	u32 key, ret = 0;
++	u32 keyindex_provided;
++	NDIS_802_11_WEP	 wep;	
++	NDIS_802_11_AUTHENTICATION_MODE authmode;
++
++	struct iw_point *erq = &(wrqu->encoding);
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
++	DBG_871X("+rtw_wx_set_enc, flags=0x%x\n", erq->flags);
++
++	_rtw_memset(&wep, 0, sizeof(NDIS_802_11_WEP));
++	
++	key = erq->flags & IW_ENCODE_INDEX;
++	
++	_func_enter_;	
++
++	if (erq->flags & IW_ENCODE_DISABLED)
++	{
++		DBG_871X("EncryptionDisabled\n");
++		padapter->securitypriv.ndisencryptstatus = Ndis802_11EncryptionDisabled;
++		padapter->securitypriv.dot11PrivacyAlgrthm=_NO_PRIVACY_;
++		padapter->securitypriv.dot118021XGrpPrivacy=_NO_PRIVACY_;
++		padapter->securitypriv.dot11AuthAlgrthm= dot11AuthAlgrthm_Open; //open system
++  		authmode = Ndis802_11AuthModeOpen;
++		padapter->securitypriv.ndisauthtype=authmode;
++     		
++		goto exit;
++	}
++
++	if (key) {
++		if (key > WEP_KEYS)
++			return -EINVAL;
++		key--;
++		keyindex_provided = 1;
++	} 
++	else
++	{
++		keyindex_provided = 0;
++		key = padapter->securitypriv.dot11PrivacyKeyIndex;
++		DBG_871X("rtw_wx_set_enc, key=%d\n", key);
++	}
++	
++	//set authentication mode	
++	if(erq->flags & IW_ENCODE_OPEN)
++	{
++		DBG_871X("rtw_wx_set_enc():IW_ENCODE_OPEN\n");
++		padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled;//Ndis802_11EncryptionDisabled;
++
++#ifdef CONFIG_PLATFORM_MT53XX
++		padapter->securitypriv.dot11AuthAlgrthm = dot11AuthAlgrthm_Auto;
++#else
++		padapter->securitypriv.dot11AuthAlgrthm= dot11AuthAlgrthm_Open;
++#endif
++
++		padapter->securitypriv.dot11PrivacyAlgrthm=_NO_PRIVACY_;
++		padapter->securitypriv.dot118021XGrpPrivacy=_NO_PRIVACY_;
++  		authmode = Ndis802_11AuthModeOpen;
++		padapter->securitypriv.ndisauthtype=authmode;
++	}	
++	else if(erq->flags & IW_ENCODE_RESTRICTED)
++	{		
++		DBG_871X("rtw_wx_set_enc():IW_ENCODE_RESTRICTED\n");
++		padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled;
++
++#ifdef CONFIG_PLATFORM_MT53XX
++		padapter->securitypriv.dot11AuthAlgrthm = dot11AuthAlgrthm_Auto;
++#else
++		padapter->securitypriv.dot11AuthAlgrthm= dot11AuthAlgrthm_Shared;
++#endif
++
++		padapter->securitypriv.dot11PrivacyAlgrthm=_WEP40_;
++		padapter->securitypriv.dot118021XGrpPrivacy=_WEP40_;			
++		authmode = Ndis802_11AuthModeShared;
++		padapter->securitypriv.ndisauthtype=authmode;
++	}
++	else
++	{
++		DBG_871X("rtw_wx_set_enc():erq->flags=0x%x\n", erq->flags);
++
++		padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption1Enabled;//Ndis802_11EncryptionDisabled;
++		padapter->securitypriv.dot11AuthAlgrthm= dot11AuthAlgrthm_Open; //open system
++		padapter->securitypriv.dot11PrivacyAlgrthm=_NO_PRIVACY_;
++		padapter->securitypriv.dot118021XGrpPrivacy=_NO_PRIVACY_;
++  		authmode = Ndis802_11AuthModeOpen;
++		padapter->securitypriv.ndisauthtype=authmode;
++	}
++	
++	wep.KeyIndex = key;
++	if (erq->length > 0)
++	{
++		wep.KeyLength = erq->length <= 5 ? 5 : 13;
++
++		wep.Length = wep.KeyLength + FIELD_OFFSET(NDIS_802_11_WEP, KeyMaterial);
++	}
++	else
++	{
++		wep.KeyLength = 0 ;
++		
++		if(keyindex_provided == 1)// set key_id only, no given KeyMaterial(erq->length==0).
++		{
++			padapter->securitypriv.dot11PrivacyKeyIndex = key;
++
++			DBG_871X("(keyindex_provided == 1), keyid=%d, key_len=%d\n", key, padapter->securitypriv.dot11DefKeylen[key]);
++
++			switch(padapter->securitypriv.dot11DefKeylen[key])
++			{
++				case 5:
++					padapter->securitypriv.dot11PrivacyAlgrthm=_WEP40_;					
++					break;
++				case 13:
++					padapter->securitypriv.dot11PrivacyAlgrthm=_WEP104_;					
++					break;
++				default:
++					padapter->securitypriv.dot11PrivacyAlgrthm=_NO_PRIVACY_;					
++					break;
++			}
++				
++			goto exit;
++			
++		}
++		
++	}
++
++	wep.KeyIndex |= 0x80000000;
++
++	_rtw_memcpy(wep.KeyMaterial, keybuf, wep.KeyLength);
++	
++	if (rtw_set_802_11_add_wep(padapter, &wep) == _FALSE) {
++		if(rf_on == pwrpriv->rf_pwrstate )
++			ret = -EOPNOTSUPP;
++		goto exit;
++	}	
++
++exit:
++	
++	_func_exit_;
++	
++	return ret;
++	
++}
++
++static int rtw_wx_get_enc(struct net_device *dev, 
++			    struct iw_request_info *info, 
++			    union iwreq_data *wrqu, char *keybuf)
++{
++	uint key, ret =0;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct iw_point *erq = &(wrqu->encoding);
++	struct	mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
++
++	_func_enter_;
++	
++	if(check_fwstate(pmlmepriv, _FW_LINKED) != _TRUE)
++	{
++		 if(check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) != _TRUE)
++		 {
++		erq->length = 0;
++		erq->flags |= IW_ENCODE_DISABLED;
++		return 0;
++	}	
++	}	
++
++	
++	key = erq->flags & IW_ENCODE_INDEX;
++
++	if (key) {
++		if (key > WEP_KEYS)
++			return -EINVAL;
++		key--;
++	} else
++	{
++		key = padapter->securitypriv.dot11PrivacyKeyIndex;
++	}	
++
++	erq->flags = key + 1;
++
++	//if(padapter->securitypriv.ndisauthtype == Ndis802_11AuthModeOpen)
++	//{
++	//      erq->flags |= IW_ENCODE_OPEN;
++	//}	  
++	
++	switch(padapter->securitypriv.ndisencryptstatus)
++	{
++		case Ndis802_11EncryptionNotSupported:
++		case Ndis802_11EncryptionDisabled:
++
++		erq->length = 0;
++		erq->flags |= IW_ENCODE_DISABLED;
++	
++		break;
++		
++		case Ndis802_11Encryption1Enabled:					
++		
++		erq->length = padapter->securitypriv.dot11DefKeylen[key];		
++
++		if(erq->length)
++		{
++			_rtw_memcpy(keybuf, padapter->securitypriv.dot11DefKey[key].skey, padapter->securitypriv.dot11DefKeylen[key]);
++		
++		erq->flags |= IW_ENCODE_ENABLED;
++
++			if(padapter->securitypriv.ndisauthtype == Ndis802_11AuthModeOpen)
++			{
++	     			erq->flags |= IW_ENCODE_OPEN;
++			}
++			else if(padapter->securitypriv.ndisauthtype == Ndis802_11AuthModeShared)
++			{
++		erq->flags |= IW_ENCODE_RESTRICTED;
++			}	
++		}	
++		else
++		{
++			erq->length = 0;
++			erq->flags |= IW_ENCODE_DISABLED;
++		}
++
++		break;
++
++		case Ndis802_11Encryption2Enabled:
++		case Ndis802_11Encryption3Enabled:
++
++		erq->length = 16;
++		erq->flags |= (IW_ENCODE_ENABLED | IW_ENCODE_OPEN | IW_ENCODE_NOKEY);
++
++		break;
++	
++		default:
++		erq->length = 0;
++		erq->flags |= IW_ENCODE_DISABLED;
++
++		break;
++		
++	}
++	
++	_func_exit_;
++	
++	return ret;
++	
++}				     
++
++static int rtw_wx_get_power(struct net_device *dev, 
++			     struct iw_request_info *info, 
++			     union iwreq_data *wrqu, char *extra)
++{
++	//_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	
++	wrqu->power.value = 0;
++	wrqu->power.fixed = 0;	/* no auto select */
++	wrqu->power.disabled = 1;
++	
++	return 0;
++
++}
++
++static int rtw_wx_set_gen_ie(struct net_device *dev, 
++			     struct iw_request_info *info, 
++			     union iwreq_data *wrqu, char *extra)
++{
++	int ret;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	
++       ret = rtw_set_wpa_ie(padapter, extra, wrqu->data.length);
++	   
++	return ret;
++}	
++
++static int rtw_wx_set_auth(struct net_device *dev, 
++			     struct iw_request_info *info, 
++			     union iwreq_data *wrqu, char *extra)
++{
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct iw_param *param = (struct iw_param*)&(wrqu->param);
++	int ret = 0;
++	
++	switch (param->flags & IW_AUTH_INDEX) {
++	case IW_AUTH_WPA_VERSION:
++		break;
++	case IW_AUTH_CIPHER_PAIRWISE:
++		
++		break;
++	case IW_AUTH_CIPHER_GROUP:
++		
++		break;
++	case IW_AUTH_KEY_MGMT:
++		/*
++		 *  ??? does not use these parameters
++		 */
++		break;
++
++	case IW_AUTH_TKIP_COUNTERMEASURES:
++        {
++	    if ( param->value )
++            {  // wpa_supplicant is enabling the tkip countermeasure.
++               padapter->securitypriv.btkip_countermeasure = _TRUE; 
++            }
++            else
++            {  // wpa_supplicant is disabling the tkip countermeasure.
++               padapter->securitypriv.btkip_countermeasure = _FALSE; 
++            }
++		break;
++        }
++	case IW_AUTH_DROP_UNENCRYPTED:
++		{
++			/* HACK:
++			 *
++			 * wpa_supplicant calls set_wpa_enabled when the driver
++			 * is loaded and unloaded, regardless of if WPA is being
++			 * used.  No other calls are made which can be used to
++			 * determine if encryption will be used or not prior to
++			 * association being expected.  If encryption is not being
++			 * used, drop_unencrypted is set to false, else true -- we
++			 * can use this to determine if the CAP_PRIVACY_ON bit should
++			 * be set.
++			 */
++
++			if(padapter->securitypriv.ndisencryptstatus == Ndis802_11Encryption1Enabled)
++			{
++				break;//it means init value, or using wep, ndisencryptstatus = Ndis802_11Encryption1Enabled, 
++						// then it needn't reset it;
++			}
++			
++			if(param->value){
++				padapter->securitypriv.ndisencryptstatus = Ndis802_11EncryptionDisabled;
++				padapter->securitypriv.dot11PrivacyAlgrthm=_NO_PRIVACY_;
++				padapter->securitypriv.dot118021XGrpPrivacy=_NO_PRIVACY_;
++				padapter->securitypriv.dot11AuthAlgrthm= dot11AuthAlgrthm_Open; //open system
++				padapter->securitypriv.ndisauthtype=Ndis802_11AuthModeOpen;
++			}
++			
++			break;
++		}
++
++	case IW_AUTH_80211_AUTH_ALG:
++
++		#if defined(CONFIG_ANDROID) || 1
++		/*
++		 *  It's the starting point of a link layer connection using wpa_supplicant
++		*/
++		if(check_fwstate(&padapter->mlmepriv, _FW_LINKED)) {
++			LeaveAllPowerSaveMode(padapter);
++			rtw_disassoc_cmd(padapter, 500, _FALSE);
++			DBG_871X("%s...call rtw_indicate_disconnect\n ",__FUNCTION__);
++			rtw_indicate_disconnect(padapter);
++			rtw_free_assoc_resources(padapter, 1);
++		}
++		#endif
++
++
++		ret = wpa_set_auth_algs(dev, (u32)param->value);		
++	
++		break;
++
++	case IW_AUTH_WPA_ENABLED:
++
++		//if(param->value)
++		//	padapter->securitypriv.dot11AuthAlgrthm = dot11AuthAlgrthm_8021X; //802.1x
++		//else
++		//	padapter->securitypriv.dot11AuthAlgrthm = dot11AuthAlgrthm_Open;//open system
++		
++		//_disassociate(priv);
++		
++		break;
++
++	case IW_AUTH_RX_UNENCRYPTED_EAPOL:
++		//ieee->ieee802_1x = param->value;
++		break;
++
++	case IW_AUTH_PRIVACY_INVOKED:
++		//ieee->privacy_invoked = param->value;
++		break;
++
++	default:
++		return -EOPNOTSUPP;
++		
++	}
++	
++	return ret;
++	
++}
++
++static int rtw_wx_set_enc_ext(struct net_device *dev, 
++			     struct iw_request_info *info, 
++			     union iwreq_data *wrqu, char *extra)
++{
++	char *alg_name;
++	u32 param_len;
++	struct ieee_param *param = NULL;
++	struct iw_point *pencoding = &wrqu->encoding;
++ 	struct iw_encode_ext *pext = (struct iw_encode_ext *)extra;
++	int ret=0;
++
++	param_len = sizeof(struct ieee_param) + pext->key_len;
++	param = (struct ieee_param *)rtw_malloc(param_len);
++	if (param == NULL)
++		return -1;
++	
++	_rtw_memset(param, 0, param_len);
++
++	param->cmd = IEEE_CMD_SET_ENCRYPTION;
++	_rtw_memset(param->sta_addr, 0xff, ETH_ALEN);
++
++
++	switch (pext->alg) {
++	case IW_ENCODE_ALG_NONE:
++		//todo: remove key 
++		//remove = 1;	
++		alg_name = "none";
++		break;
++	case IW_ENCODE_ALG_WEP:
++		alg_name = "WEP";
++		break;
++	case IW_ENCODE_ALG_TKIP:
++		alg_name = "TKIP";
++		break;
++	case IW_ENCODE_ALG_CCMP:
++		alg_name = "CCMP";
++		break;
++#ifdef CONFIG_IEEE80211W
++	case IW_ENCODE_ALG_AES_CMAC:
++		alg_name = "BIP";
++		break;
++#endif //CONFIG_IEEE80211W
++	default:	
++		return -1;
++	}
++	
++	strncpy((char *)param->u.crypt.alg, alg_name, IEEE_CRYPT_ALG_NAME_LEN);
++
++	
++	if((pext->ext_flags & IW_ENCODE_EXT_GROUP_KEY)//?
++#ifdef CONFIG_IEEE80211W
++		|| (pext->ext_flags & IW_ENCODE_ALG_AES_CMAC)
++#endif //CONFIG_IEEE80211W
++	)
++	{
++		param->u.crypt.set_tx = 0;
++	}
++
++	if (pext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)//?
++	{
++		param->u.crypt.set_tx = 1;
++	}
++
++	param->u.crypt.idx = (pencoding->flags&0x00FF) -1 ;
++	
++	if (pext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) 
++	{	
++		_rtw_memcpy(param->u.crypt.seq, pext->rx_seq, 8);
++	}
++
++	if(pext->key_len)
++	{
++		param->u.crypt.key_len = pext->key_len;
++		//_rtw_memcpy(param + 1, pext + 1, pext->key_len);
++		_rtw_memcpy(param->u.crypt.key, pext + 1, pext->key_len);
++	}	
++
++	
++	if (pencoding->flags & IW_ENCODE_DISABLED)
++	{		
++		//todo: remove key 
++		//remove = 1;		
++	}	
++	
++	ret =  wpa_set_encryption(dev, param, param_len);	
++	
++
++	if(param)
++	{
++		rtw_mfree((u8*)param, param_len);
++	}
++		
++	
++	return ret;		
++
++}
++
++
++static int rtw_wx_get_nick(struct net_device *dev, 
++			     struct iw_request_info *info, 
++			     union iwreq_data *wrqu, char *extra)
++{	
++	//_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	 //struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	 //struct security_priv *psecuritypriv = &padapter->securitypriv;
++
++	if(extra)
++	{
++		wrqu->data.length = 14;
++		wrqu->data.flags = 1;
++		_rtw_memcpy(extra, "<WIFI@REALTEK>", 14);
++	}
++
++	//rtw_signal_process(pid, SIGUSR1); //for test
++
++	//dump debug info here	
++/*
++	u32 dot11AuthAlgrthm;		// 802.11 auth, could be open, shared, and 8021x
++	u32 dot11PrivacyAlgrthm;	// This specify the privacy for shared auth. algorithm.
++	u32 dot118021XGrpPrivacy;	// This specify the privacy algthm. used for Grp key 
++	u32 ndisauthtype;
++	u32 ndisencryptstatus;
++*/
++
++	//DBG_871X("auth_alg=0x%x, enc_alg=0x%x, auth_type=0x%x, enc_type=0x%x\n", 
++	//		psecuritypriv->dot11AuthAlgrthm, psecuritypriv->dot11PrivacyAlgrthm,
++	//		psecuritypriv->ndisauthtype, psecuritypriv->ndisencryptstatus);
++	
++	//DBG_871X("enc_alg=0x%x\n", psecuritypriv->dot11PrivacyAlgrthm);
++	//DBG_871X("auth_type=0x%x\n", psecuritypriv->ndisauthtype);
++	//DBG_871X("enc_type=0x%x\n", psecuritypriv->ndisencryptstatus);
++
++#if 0
++	DBG_871X("dbg(0x210)=0x%x\n", rtw_read32(padapter, 0x210));
++	DBG_871X("dbg(0x608)=0x%x\n", rtw_read32(padapter, 0x608));
++	DBG_871X("dbg(0x280)=0x%x\n", rtw_read32(padapter, 0x280));
++	DBG_871X("dbg(0x284)=0x%x\n", rtw_read32(padapter, 0x284));
++	DBG_871X("dbg(0x288)=0x%x\n", rtw_read32(padapter, 0x288));
++	
++	DBG_871X("dbg(0x664)=0x%x\n", rtw_read32(padapter, 0x664));
++
++
++	DBG_871X("\n");
++
++	DBG_871X("dbg(0x430)=0x%x\n", rtw_read32(padapter, 0x430));
++	DBG_871X("dbg(0x438)=0x%x\n", rtw_read32(padapter, 0x438));
++
++	DBG_871X("dbg(0x440)=0x%x\n", rtw_read32(padapter, 0x440));
++	
++	DBG_871X("dbg(0x458)=0x%x\n", rtw_read32(padapter, 0x458));
++	
++	DBG_871X("dbg(0x484)=0x%x\n", rtw_read32(padapter, 0x484));
++	DBG_871X("dbg(0x488)=0x%x\n", rtw_read32(padapter, 0x488));
++	
++	DBG_871X("dbg(0x444)=0x%x\n", rtw_read32(padapter, 0x444));
++	DBG_871X("dbg(0x448)=0x%x\n", rtw_read32(padapter, 0x448));
++	DBG_871X("dbg(0x44c)=0x%x\n", rtw_read32(padapter, 0x44c));
++	DBG_871X("dbg(0x450)=0x%x\n", rtw_read32(padapter, 0x450));
++#endif
++	
++	return 0;
++
++}
++
++static int rtw_wx_read32(struct net_device *dev,
++                            struct iw_request_info *info,
++                            union iwreq_data *wrqu, char *extra)
++{
++	PADAPTER padapter;
++	struct iw_point *p;
++	u16 len;
++	u32 addr;
++	u32 data32;
++	u32 bytes;
++	u8 *ptmp;
++
++
++	padapter = (PADAPTER)rtw_netdev_priv(dev);
++	p = &wrqu->data;
++	len = p->length;
++	ptmp = (u8*)rtw_malloc(len);
++	if (NULL == ptmp)
++		return -ENOMEM;
++
++	if (copy_from_user(ptmp, p->pointer, len)) {
++		rtw_mfree(ptmp, len);
++		return -EFAULT;
++	}
++
++	bytes = 0;
++	addr = 0;
++	sscanf(ptmp, "%d,%x", &bytes, &addr);
++
++	switch (bytes) {
++		case 1:
++			data32 = rtw_read8(padapter, addr);
++			sprintf(extra, "0x%02X", data32);
++			break;
++		case 2:
++			data32 = rtw_read16(padapter, addr);
++			sprintf(extra, "0x%04X", data32);
++			break;
++		case 4:
++			data32 = rtw_read32(padapter, addr);
++			sprintf(extra, "0x%08X", data32);
++			break;
++		default:
++			printk(KERN_INFO "%s: usage> read [bytes],[address(hex)]\n", __func__);
++			return -EINVAL;
++	}
++	printk(KERN_INFO "%s: addr=0x%08X data=%s\n", __func__, addr, extra);
++
++	rtw_mfree(ptmp, len);
++
++	return 0;
++}
++
++static int rtw_wx_write32(struct net_device *dev,
++                            struct iw_request_info *info,
++                            union iwreq_data *wrqu, char *extra)
++{
++	PADAPTER padapter = (PADAPTER)rtw_netdev_priv(dev);
++
++	u32 addr;
++	u32 data32;
++	u32 bytes;
++
++
++	bytes = 0;
++	addr = 0;
++	data32 = 0;
++	sscanf(extra, "%d,%x,%x", &bytes, &addr, &data32);
++
++	switch (bytes) {
++		case 1:
++			rtw_write8(padapter, addr, (u8)data32);
++			printk(KERN_INFO "%s: addr=0x%08X data=0x%02X\n", __func__, addr, (u8)data32);
++			break;
++		case 2:
++			rtw_write16(padapter, addr, (u16)data32);
++			printk(KERN_INFO "%s: addr=0x%08X data=0x%04X\n", __func__, addr, (u16)data32);
++			break;
++		case 4:
++			rtw_write32(padapter, addr, data32);
++			printk(KERN_INFO "%s: addr=0x%08X data=0x%08X\n", __func__, addr, data32);
++			break;
++		default:
++			printk(KERN_INFO "%s: usage> write [bytes],[address(hex)],[data(hex)]\n", __func__);
++			return -EINVAL;
++	}
++
++	return 0;
++}
++
++static int rtw_wx_read_rf(struct net_device *dev,
++                            struct iw_request_info *info,
++                            union iwreq_data *wrqu, char *extra)
++{
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	u32 path, addr, data32;
++
++
++	path = *(u32*)extra;
++	addr = *((u32*)extra + 1);
++	data32 = rtw_hal_read_rfreg(padapter, path, addr, 0xFFFFF);
++//	DBG_871X("%s: path=%d addr=0x%02x data=0x%05x\n", __func__, path, addr, data32);
++	/*
++	 * IMPORTANT!!
++	 * Only when wireless private ioctl is at odd order,
++	 * "extra" would be copied to user space.
++	 */
++	sprintf(extra, "0x%05x", data32);
++
++	return 0;
++}
++
++static int rtw_wx_write_rf(struct net_device *dev,
++                            struct iw_request_info *info,
++                            union iwreq_data *wrqu, char *extra)
++{
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	u32 path, addr, data32;
++
++
++	path = *(u32*)extra;
++	addr = *((u32*)extra + 1);
++	data32 = *((u32*)extra + 2);
++//	DBG_871X("%s: path=%d addr=0x%02x data=0x%05x\n", __func__, path, addr, data32);
++	rtw_hal_write_rfreg(padapter, path, addr, 0xFFFFF, data32);
++
++	return 0;
++}
++
++static int rtw_wx_priv_null(struct net_device *dev, struct iw_request_info *a,
++		 union iwreq_data *wrqu, char *b)
++{
++	return -1;
++}
++
++static int dummy(struct net_device *dev, struct iw_request_info *a,
++		 union iwreq_data *wrqu, char *b)
++{
++	//_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);	
++	//struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++
++	//DBG_871X("cmd_code=%x, fwstate=0x%x\n", a->cmd, get_fwstate(pmlmepriv));
++	
++	return -1;
++	
++}
++
++static int rtw_wx_set_channel_plan(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct registry_priv *pregistrypriv = &padapter->registrypriv;
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	extern int rtw_channel_plan;
++	u8 channel_plan_req = (u8) (*((int *)wrqu));
++
++	#if 0
++	rtw_channel_plan = (int)wrqu->data.pointer;
++	pregistrypriv->channel_plan = rtw_channel_plan;
++	pmlmepriv->ChannelPlan = pregistrypriv->channel_plan;
++	#endif
++
++	if( _SUCCESS == rtw_set_chplan_cmd(padapter, channel_plan_req, 1) ) {
++		DBG_871X("%s set channel_plan = 0x%02X\n", __func__, pmlmepriv->ChannelPlan);
++	} else 
++		return -EPERM;
++
++	return 0;
++}
++
++static int rtw_wx_set_mtk_wps_probe_ie(struct net_device *dev,
++		struct iw_request_info *a,
++		union iwreq_data *wrqu, char *b)
++{
++#ifdef CONFIG_PLATFORM_MT53XX
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++
++	RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_notice_,
++		 ("WLAN IOCTL: cmd_code=%x, fwstate=0x%x\n",
++		  a->cmd, get_fwstate(pmlmepriv)));
++#endif
++	return 0;
++}
++
++static int rtw_wx_get_sensitivity(struct net_device *dev,
++				struct iw_request_info *info,
++				union iwreq_data *wrqu, char *buf)
++{
++#ifdef CONFIG_PLATFORM_MT53XX
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++
++	//	Modified by Albert 20110914
++	//	This is in dbm format for MTK platform.
++	wrqu->qual.level = padapter->recvpriv.rssi;
++	DBG_871X(" level = %u\n",  wrqu->qual.level );
++#endif
++	return 0;
++}
++
++static int rtw_wx_set_mtk_wps_ie(struct net_device *dev,
++				struct iw_request_info *info,
++				union iwreq_data *wrqu, char *extra)
++{
++#ifdef CONFIG_PLATFORM_MT53XX
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++
++	return rtw_set_wpa_ie(padapter, wrqu->data.pointer, wrqu->data.length);
++#else
++	return 0;
++#endif
++}
++
++/*
++typedef int (*iw_handler)(struct net_device *dev, struct iw_request_info *info,
++			  union iwreq_data *wrqu, char *extra);
++*/
++/*
++ *	For all data larger than 16 octets, we need to use a
++ *	pointer to memory allocated in user space.
++ */
++static  int rtw_drvext_hdl(struct net_device *dev, struct iw_request_info *info,
++						union iwreq_data *wrqu, char *extra)
++{
++
++ #if 0
++struct	iw_point
++{
++  void __user	*pointer;	/* Pointer to the data  (in user space) */
++  __u16		length;		/* number of fields or size in bytes */
++  __u16		flags;		/* Optional params */
++};
++ #endif
++
++#ifdef CONFIG_DRVEXT_MODULE
++	u8 res;
++	struct drvext_handler *phandler;	
++	struct drvext_oidparam *poidparam;		
++	int ret;
++	u16 len;
++	u8 *pparmbuf, bset;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct iw_point *p = &wrqu->data;
++
++	if( (!p->length) || (!p->pointer)){
++		ret = -EINVAL;
++		goto _rtw_drvext_hdl_exit;
++	}
++	
++	
++	bset = (u8)(p->flags&0xFFFF);
++	len = p->length;
++	pparmbuf = (u8*)rtw_malloc(len);
++	if (pparmbuf == NULL){
++		ret = -ENOMEM;
++		goto _rtw_drvext_hdl_exit;
++	}
++	
++	if(bset)//set info
++	{
++		if (copy_from_user(pparmbuf, p->pointer,len)) {
++			rtw_mfree(pparmbuf, len);
++			ret = -EFAULT;
++			goto _rtw_drvext_hdl_exit;
++		}		
++	}
++	else//query info
++	{
++	
++	}
++
++	
++	//
++	poidparam = (struct drvext_oidparam *)pparmbuf;	
++	
++	RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_info_,("drvext set oid subcode [%d], len[%d], InformationBufferLength[%d]\r\n",
++        					 poidparam->subcode, poidparam->len, len));
++
++
++	//check subcode	
++	if ( poidparam->subcode >= MAX_DRVEXT_HANDLERS)
++	{
++		RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_err_,("no matching drvext handlers\r\n"));		
++		ret = -EINVAL;
++		goto _rtw_drvext_hdl_exit;
++	}
++
++
++	if ( poidparam->subcode >= MAX_DRVEXT_OID_SUBCODES)
++	{
++		RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_err_,("no matching drvext subcodes\r\n"));		
++		ret = -EINVAL;
++		goto _rtw_drvext_hdl_exit;
++	}
++
++
++	phandler = drvextoidhandlers + poidparam->subcode;
++
++	if (poidparam->len != phandler->parmsize)
++	{
++		RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_err_,("no matching drvext param size %d vs %d\r\n",			
++						poidparam->len , phandler->parmsize));		
++		ret = -EINVAL;		
++		goto _rtw_drvext_hdl_exit;
++	}
++
++
++	res = phandler->handler(&padapter->drvextpriv, bset, poidparam->data);
++
++	if(res==0)
++	{
++		ret = 0;
++			
++		if (bset == 0x00) {//query info
++			//_rtw_memcpy(p->pointer, pparmbuf, len);
++			if (copy_to_user(p->pointer, pparmbuf, len))
++				ret = -EFAULT;
++		}		
++	}		
++	else
++		ret = -EFAULT;
++
++	
++_rtw_drvext_hdl_exit:	
++	
++	return ret;	
++	
++#endif
++
++	return 0;
++
++}
++
++static void rtw_dbg_mode_hdl(_adapter *padapter, u32 id, u8 *pdata, u32 len)
++{
++	pRW_Reg 	RegRWStruct;
++	struct rf_reg_param *prfreg;
++	u8 path;
++	u8 offset;
++	u32 value;
++
++	DBG_871X("%s\n", __FUNCTION__);
++
++	switch(id)
++	{
++		case GEN_MP_IOCTL_SUBCODE(MP_START):
++			DBG_871X("871x_driver is only for normal mode, can't enter mp mode\n");
++			break;
++		case GEN_MP_IOCTL_SUBCODE(READ_REG):
++			RegRWStruct = (pRW_Reg)pdata;
++			switch (RegRWStruct->width)
++			{
++				case 1:
++					RegRWStruct->value = rtw_read8(padapter, RegRWStruct->offset);
++					break;
++				case 2:
++					RegRWStruct->value = rtw_read16(padapter, RegRWStruct->offset);
++					break;
++				case 4:
++					RegRWStruct->value = rtw_read32(padapter, RegRWStruct->offset);
++					break;
++				default:
++					break;
++			}
++		
++			break;
++		case GEN_MP_IOCTL_SUBCODE(WRITE_REG):
++			RegRWStruct = (pRW_Reg)pdata;
++			switch (RegRWStruct->width)
++			{
++				case 1:
++					rtw_write8(padapter, RegRWStruct->offset, (u8)RegRWStruct->value);
++					break;
++				case 2:
++					rtw_write16(padapter, RegRWStruct->offset, (u16)RegRWStruct->value);
++					break;
++				case 4:
++					rtw_write32(padapter, RegRWStruct->offset, (u32)RegRWStruct->value);
++					break;
++				default:					
++				break;
++			}
++				
++			break;
++		case GEN_MP_IOCTL_SUBCODE(READ_RF_REG):
++
++			prfreg = (struct rf_reg_param *)pdata;
++
++			path = (u8)prfreg->path;		
++			offset = (u8)prfreg->offset;	
++
++			value = rtw_hal_read_rfreg(padapter, path, offset, 0xffffffff);
++
++			prfreg->value = value;
++
++			break;			
++		case GEN_MP_IOCTL_SUBCODE(WRITE_RF_REG):
++
++			prfreg = (struct rf_reg_param *)pdata;
++
++			path = (u8)prfreg->path;
++			offset = (u8)prfreg->offset;	
++			value = prfreg->value;
++
++			rtw_hal_write_rfreg(padapter, path, offset, 0xffffffff, value);
++			
++			break;			
++                case GEN_MP_IOCTL_SUBCODE(TRIGGER_GPIO):
++			DBG_871X("==> trigger gpio 0\n");
++			rtw_hal_set_hwreg(padapter, HW_VAR_TRIGGER_GPIO_0, 0);
++			break;	
++#ifdef CONFIG_BT_COEXIST
++		case GEN_MP_IOCTL_SUBCODE(SET_DM_BT):			
++			DBG_871X("==> set dm_bt_coexist:%x\n",*(u8 *)pdata);
++			rtw_hal_set_hwreg(padapter, HW_VAR_BT_SET_COEXIST, pdata);
++			break;
++		case GEN_MP_IOCTL_SUBCODE(DEL_BA):
++			DBG_871X("==> delete ba:%x\n",*(u8 *)pdata);
++			rtw_hal_set_hwreg(padapter, HW_VAR_BT_ISSUE_DELBA, pdata);
++			break;
++#endif
++#ifdef DBG_CONFIG_ERROR_DETECT
++		case GEN_MP_IOCTL_SUBCODE(GET_WIFI_STATUS):	
++			*pdata = rtw_hal_sreset_get_wifi_status(padapter);
++			break;
++#endif
++	
++		default:
++			break;
++	}
++	
++}
++
++static int rtw_mp_ioctl_hdl(struct net_device *dev, struct iw_request_info *info,
++						union iwreq_data *wrqu, char *extra)
++{
++	int ret = 0;
++	u32 BytesRead, BytesWritten, BytesNeeded;
++	struct oid_par_priv	oid_par;
++	struct mp_ioctl_handler	*phandler;
++	struct mp_ioctl_param	*poidparam;
++	uint status=0;
++	u16 len;
++	u8 *pparmbuf = NULL, bset;
++	PADAPTER padapter = (PADAPTER)rtw_netdev_priv(dev);
++	struct iw_point *p = &wrqu->data;
++
++	//DBG_871X("+rtw_mp_ioctl_hdl\n");
++
++	//mutex_lock(&ioctl_mutex);
++
++	if ((!p->length) || (!p->pointer)) {
++		ret = -EINVAL;
++		goto _rtw_mp_ioctl_hdl_exit;
++	}
++
++	pparmbuf = NULL;
++	bset = (u8)(p->flags & 0xFFFF);
++	len = p->length;
++	pparmbuf = (u8*)rtw_malloc(len);
++	if (pparmbuf == NULL){
++		ret = -ENOMEM;
++		goto _rtw_mp_ioctl_hdl_exit;
++	}
++
++	if (copy_from_user(pparmbuf, p->pointer, len)) {
++		ret = -EFAULT;
++		goto _rtw_mp_ioctl_hdl_exit;
++	}
++
++	poidparam = (struct mp_ioctl_param *)pparmbuf;
++	RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_info_,
++		 ("rtw_mp_ioctl_hdl: subcode [%d], len[%d], buffer_len[%d]\r\n",
++		  poidparam->subcode, poidparam->len, len));
++
++	if (poidparam->subcode >= MAX_MP_IOCTL_SUBCODE) {
++		RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_err_, ("no matching drvext subcodes\r\n"));
++		ret = -EINVAL;
++		goto _rtw_mp_ioctl_hdl_exit;
++	}
++
++	//DBG_871X("%s: %d\n", __func__, poidparam->subcode);
++
++#ifdef CONFIG_MP_INCLUDED 
++	phandler = mp_ioctl_hdl + poidparam->subcode;
++
++	if ((phandler->paramsize != 0) && (poidparam->len < phandler->paramsize))
++	{
++		RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_err_,
++			 ("no matching drvext param size %d vs %d\r\n",
++			  poidparam->len, phandler->paramsize));
++		ret = -EINVAL;
++		goto _rtw_mp_ioctl_hdl_exit;
++	}
++
++	if (phandler->handler)
++	{
++		oid_par.adapter_context = padapter;
++		oid_par.oid = phandler->oid;
++		oid_par.information_buf = poidparam->data;
++		oid_par.information_buf_len = poidparam->len;
++		oid_par.dbg = 0;
++
++		BytesWritten = 0;
++		BytesNeeded = 0;
++
++		if (bset) {
++			oid_par.bytes_rw = &BytesRead;
++			oid_par.bytes_needed = &BytesNeeded;
++			oid_par.type_of_oid = SET_OID;
++		} else {
++			oid_par.bytes_rw = &BytesWritten;
++			oid_par.bytes_needed = &BytesNeeded;
++			oid_par.type_of_oid = QUERY_OID;
++		}
++
++		status = phandler->handler(&oid_par);
++
++		//todo:check status, BytesNeeded, etc.
++	}
++	else {
++		DBG_871X("rtw_mp_ioctl_hdl(): err!, subcode=%d, oid=%d, handler=%p\n", 
++			poidparam->subcode, phandler->oid, phandler->handler);
++		ret = -EFAULT;
++		goto _rtw_mp_ioctl_hdl_exit;
++	}
++#else
++
++	rtw_dbg_mode_hdl(padapter, poidparam->subcode, poidparam->data, poidparam->len);
++	
++#endif
++
++	if (bset == 0x00) {//query info
++		if (copy_to_user(p->pointer, pparmbuf, len))
++			ret = -EFAULT;
++	}
++
++	if (status) {
++		ret = -EFAULT;
++		goto _rtw_mp_ioctl_hdl_exit;
++	}
++
++_rtw_mp_ioctl_hdl_exit:
++
++	if (pparmbuf)
++		rtw_mfree(pparmbuf, len);
++
++	//mutex_unlock(&ioctl_mutex);
++
++	return ret;
++}
++
++static int rtw_get_ap_info(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	int bssid_match, ret = 0;
++	u32 cnt=0, wpa_ielen;
++	_irqL	irqL;
++	_list	*plist, *phead;
++	unsigned char *pbuf;
++	u8 bssid[ETH_ALEN];
++	char data[32];
++	struct wlan_network *pnetwork = NULL;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);	
++	_queue *queue = &(pmlmepriv->scanned_queue);
++	struct iw_point *pdata = &wrqu->data;	
++
++	DBG_871X("+rtw_get_aplist_info\n");
++
++	if((padapter->bDriverStopped) || (pdata==NULL))
++	{                
++		ret= -EINVAL;
++		goto exit;
++	}		
++  
++ 	while((check_fwstate(pmlmepriv, (_FW_UNDER_SURVEY|_FW_UNDER_LINKING))) == _TRUE)
++	{	
++		rtw_msleep_os(30);
++		cnt++;
++		if(cnt > 100)
++			break;
++	}
++	
++
++	//pdata->length = 0;//?	
++	pdata->flags = 0;
++	if(pdata->length>=32)
++	{
++		if(copy_from_user(data, pdata->pointer, 32))
++		{
++			ret= -EINVAL;
++			goto exit;
++		}
++	}	
++	else
++	{
++		ret= -EINVAL;
++		goto exit;
++	}	
++
++	_enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++	
++	phead = get_list_head(queue);
++	plist = get_next(phead);
++       
++	while(1)
++	{
++		if (rtw_end_of_queue_search(phead,plist)== _TRUE)
++			break;
++
++
++		pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list);
++
++		//if(hwaddr_aton_i(pdata->pointer, bssid)) 
++		if(hwaddr_aton_i(data, bssid)) 
++		{			
++			DBG_871X("Invalid BSSID '%s'.\n", (u8*)data);
++			_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++			return -EINVAL;
++		}		
++		
++	
++		if(_rtw_memcmp(bssid, pnetwork->network.MacAddress, ETH_ALEN) == _TRUE)//BSSID match, then check if supporting wpa/wpa2
++		{
++			DBG_871X("BSSID:" MAC_FMT "\n", MAC_ARG(bssid));
++			
++			pbuf = rtw_get_wpa_ie(&pnetwork->network.IEs[12], &wpa_ielen, pnetwork->network.IELength-12);				
++			if(pbuf && (wpa_ielen>0))
++			{
++				pdata->flags = 1;
++				break;
++			}
++
++			pbuf = rtw_get_wpa2_ie(&pnetwork->network.IEs[12], &wpa_ielen, pnetwork->network.IELength-12);
++			if(pbuf && (wpa_ielen>0))
++			{
++				pdata->flags = 2;
++				break;
++			}
++			
++		}
++
++		plist = get_next(plist);		
++	
++	}        
++
++	_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++
++	if(pdata->length>=34)
++	{
++		if(copy_to_user((u8*)pdata->pointer+32, (u8*)&pdata->flags, 1))
++		{
++			ret= -EINVAL;
++			goto exit;
++		}
++	}	
++	
++exit:
++	
++	return ret;
++		
++}
++
++static int rtw_set_pid(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	
++	int ret = 0;	
++	_adapter *padapter = rtw_netdev_priv(dev);	
++	int *pdata = (int *)wrqu;
++	int selector;
++
++	if((padapter->bDriverStopped) || (pdata==NULL))
++	{                
++		ret= -EINVAL;
++		goto exit;
++	}		
++  
++	selector = *pdata;
++	if(selector < 3 && selector >=0) {
++		padapter->pid[selector] = *(pdata+1);
++		#ifdef CONFIG_GLOBAL_UI_PID
++		ui_pid[selector] = *(pdata+1);
++		#endif
++		DBG_871X("%s set pid[%d]=%d\n", __FUNCTION__, selector ,padapter->pid[selector]);
++	}
++	else
++		DBG_871X("%s selector %d error\n", __FUNCTION__, selector);
++
++exit:
++	
++	return ret;
++		
++}
++
++static int rtw_wps_start(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	
++	int ret = 0;	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct iw_point *pdata = &wrqu->data;
++	u32   u32wps_start = 0;
++        unsigned int uintRet = 0;
++
++        uintRet = copy_from_user( ( void* ) &u32wps_start, pdata->pointer, 4 );
++
++	if((padapter->bDriverStopped) || (pdata==NULL))
++	{                
++		ret= -EINVAL;
++		goto exit;
++	}		
++
++	if ( u32wps_start == 0 )
++	{
++		u32wps_start = *extra;
++	}
++
++	DBG_871X( "[%s] wps_start = %d\n", __FUNCTION__, u32wps_start );
++
++	if ( u32wps_start == 1 ) // WPS Start
++	{
++		rtw_led_control(padapter, LED_CTL_START_WPS);
++	}
++	else if ( u32wps_start == 2 ) // WPS Stop because of wps success
++	{
++		rtw_led_control(padapter, LED_CTL_STOP_WPS);
++	}
++	else if ( u32wps_start == 3 ) // WPS Stop because of wps fail
++	{
++		rtw_led_control(padapter, LED_CTL_STOP_WPS_FAIL);
++	}
++
++#ifdef CONFIG_INTEL_WIDI
++	process_intel_widi_wps_status(padapter, u32wps_start);
++#endif //CONFIG_INTEL_WIDI
++	
++exit:
++	
++	return ret;
++		
++}
++
++#ifdef CONFIG_P2P
++static int rtw_wext_p2p_enable(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	
++	int ret = 0;	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);	
++	struct iw_point *pdata = &wrqu->data;
++	struct wifidirect_info *pwdinfo= &(padapter->wdinfo);
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
++	enum P2P_ROLE init_role = P2P_ROLE_DISABLE;
++
++	if(*extra == '0' )
++		init_role = P2P_ROLE_DISABLE;
++	else if(*extra == '1')
++		init_role = P2P_ROLE_DEVICE;
++	else if(*extra == '2')
++		init_role = P2P_ROLE_CLIENT;
++	else if(*extra == '3')
++		init_role = P2P_ROLE_GO;
++
++	if(_FAIL == rtw_p2p_enable(padapter, init_role))
++	{
++		ret = -EFAULT;
++		goto exit;
++	}
++
++	//set channel/bandwidth
++	if(init_role != P2P_ROLE_DISABLE) 
++	{	
++		u8 channel, ch_offset;
++		u16 bwmode;
++
++		if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_LISTEN))
++		{
++			//	Stay at the listen state and wait for discovery.
++			channel = pwdinfo->listen_channel;
++			pwdinfo->operating_channel = pwdinfo->listen_channel;
++			ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
++			bwmode = HT_CHANNEL_WIDTH_20;
++		}
++#ifdef CONFIG_CONCURRENT_MODE
++		else if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_IDLE))
++		{
++			_adapter				*pbuddy_adapter = padapter->pbuddy_adapter;
++			//struct wifidirect_info	*pbuddy_wdinfo = &pbuddy_adapter->wdinfo;
++			struct mlme_priv		*pbuddy_mlmepriv = &pbuddy_adapter->mlmepriv;
++			struct mlme_ext_priv	*pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++			
++			_set_timer( &pwdinfo->ap_p2p_switch_timer, pwdinfo->ext_listen_interval );
++			if ( check_fwstate( pbuddy_mlmepriv, _FW_LINKED ) )
++			{
++				pwdinfo->operating_channel = pbuddy_mlmeext->cur_channel;
++				//	How about the ch_offset and bwmode ??
++			}
++			else
++			{
++				pwdinfo->operating_channel = pwdinfo->listen_channel;
++			}
++
++			channel = pbuddy_mlmeext->cur_channel;
++			ch_offset = pbuddy_mlmeext->cur_ch_offset;
++			bwmode = pbuddy_mlmeext->cur_bwmode;
++		}
++#endif
++		else
++		{
++			pwdinfo->operating_channel = pmlmeext->cur_channel;
++		
++			channel = pwdinfo->operating_channel;
++			ch_offset = pmlmeext->cur_ch_offset;
++			bwmode = pmlmeext->cur_bwmode;						
++		}
++
++		set_channel_bwmode(padapter, channel, ch_offset, bwmode);
++	}
++
++exit:
++	return ret;
++		
++}
++
++static int rtw_p2p_set_go_nego_ssid(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	
++	int ret = 0;	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);	
++	struct iw_point *pdata = &wrqu->data;
++	struct wifidirect_info *pwdinfo= &(padapter->wdinfo);
++
++	DBG_871X( "[%s] ssid = %s, len = %d\n", __FUNCTION__, extra, (u32)strlen( extra ) );
++	_rtw_memcpy( pwdinfo->nego_ssid, extra, strlen( extra ) );
++	pwdinfo->nego_ssidlen = strlen( extra );
++	
++	return ret;
++		
++}
++
++
++static int rtw_p2p_set_intent(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	int 							ret = 0;
++	_adapter 						*padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct wifidirect_info 			*pwdinfo= &(padapter->wdinfo);
++	u8							intent = pwdinfo->intent;
++
++	extra[ wrqu->data.length ] = 0x00;
++
++	intent = rtw_atoi( extra );
++	
++	if ( intent <= 15 )
++	{
++		pwdinfo->intent= intent;
++	}
++	else
++	{
++		ret = -1;
++	}
++	
++	DBG_871X( "[%s] intent = %d\n", __FUNCTION__, intent);
++
++	return ret;
++
++}
++
++static int rtw_p2p_set_listen_ch(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	
++	int ret = 0;	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct wifidirect_info *pwdinfo= &(padapter->wdinfo);
++	u8	listen_ch = pwdinfo->listen_channel;	//	Listen channel number
++
++	extra[ wrqu->data.length ] = 0x00;
++	listen_ch = rtw_atoi( extra );
++
++	if ( ( listen_ch == 1 ) || ( listen_ch == 6 ) || ( listen_ch == 11 ) )
++	{
++		pwdinfo->listen_channel = listen_ch;
++		set_channel_bwmode(padapter, pwdinfo->listen_channel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
++	}
++	else
++	{
++		ret = -1;
++	}
++	
++	DBG_871X( "[%s] listen_ch = %d\n", __FUNCTION__, pwdinfo->listen_channel );
++	
++	return ret;
++		
++}
++
++static int rtw_p2p_set_op_ch(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++//	Commented by Albert 20110524
++//	This function is used to set the operating channel if the driver will become the group owner
++
++	int ret = 0;	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct wifidirect_info *pwdinfo= &(padapter->wdinfo);
++	u8	op_ch = pwdinfo->operating_channel;	//	Operating channel number
++
++	extra[ wrqu->data.length ] = 0x00;
++
++	op_ch = ( u8 ) rtw_atoi( extra );
++	if ( op_ch > 0 )
++	{
++		pwdinfo->operating_channel = op_ch;
++	}
++	else
++	{
++		ret = -1;
++	}
++	
++	DBG_871X( "[%s] op_ch = %d\n", __FUNCTION__, pwdinfo->operating_channel );
++	
++	return ret;
++
++}
++
++
++static int rtw_p2p_profilefound(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	
++	int ret = 0;	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct wifidirect_info *pwdinfo= &(padapter->wdinfo);
++
++	//	Comment by Albert 2010/10/13
++	//	Input data format:
++	//	Ex:  0
++	//	Ex:  1XX:XX:XX:XX:XX:XXYYSSID
++	//	0 => Reflush the profile record list.
++	//	1 => Add the profile list
++	//	XX:XX:XX:XX:XX:XX => peer's MAC Address ( ex: 00:E0:4C:00:00:01 )
++	//	YY => SSID Length
++	//	SSID => SSID for persistence group
++
++	DBG_871X( "[%s] In value = %s, len = %d \n", __FUNCTION__, extra, wrqu->data.length -1);
++
++	
++	//	The upper application should pass the SSID to driver by using this rtw_p2p_profilefound function.
++	if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++	{
++		if ( extra[ 0 ] == '0' )
++		{
++			//	Remove all the profile information of wifidirect_info structure.
++			_rtw_memset( &pwdinfo->profileinfo[ 0 ], 0x00, sizeof( struct profile_info ) * P2P_MAX_PERSISTENT_GROUP_NUM );
++			pwdinfo->profileindex = 0;
++		}
++		else
++		{
++			if ( pwdinfo->profileindex >= P2P_MAX_PERSISTENT_GROUP_NUM )
++		{
++				ret = -1;
++		}
++		else
++		{
++				int jj, kk;
++				
++				//	Add this profile information into pwdinfo->profileinfo
++				//	Ex:  1XX:XX:XX:XX:XX:XXYYSSID
++				for( jj = 0, kk = 1; jj < ETH_ALEN; jj++, kk += 3 )
++				{
++					pwdinfo->profileinfo[ pwdinfo->profileindex ].peermac[ jj ] = key_2char2num(extra[ kk ], extra[ kk+ 1 ]);
++				}
++
++				//pwdinfo->profileinfo[ pwdinfo->profileindex ].ssidlen = ( extra[18] - '0' ) * 10 + ( extra[ 19 ] - '0' );
++				//_rtw_memcpy( pwdinfo->profileinfo[ pwdinfo->profileindex ].ssid, &extra[ 20 ], pwdinfo->profileinfo[ pwdinfo->profileindex ].ssidlen );
++				pwdinfo->profileindex++;
++			}
++		}
++	}	
++	
++	return ret;
++		
++}
++
++static int rtw_p2p_setDN(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	
++	int ret = 0;	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct wifidirect_info *pwdinfo= &(padapter->wdinfo);
++
++
++	DBG_871X( "[%s] %s %d\n", __FUNCTION__, extra, wrqu->data.length -1  );
++
++	_rtw_memset( pwdinfo->device_name, 0x00, WPS_MAX_DEVICE_NAME_LEN );
++	_rtw_memcpy( pwdinfo->device_name, extra, wrqu->data.length - 1 );
++	pwdinfo->device_name_len = wrqu->data.length - 1;
++	return ret;
++		
++}
++
++
++static int rtw_p2p_get_status(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	
++	int ret = 0;	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct iw_point *pdata = &wrqu->data;
++	struct wifidirect_info	*pwdinfo = &( padapter->wdinfo );
++
++
++	if ( padapter->bShowGetP2PState )
++	{
++		DBG_871X( "[%s] Role = %d, Status = %d, peer addr = %.2X:%.2X:%.2X:%.2X:%.2X:%.2X\n", __FUNCTION__, rtw_p2p_role(pwdinfo), rtw_p2p_state(pwdinfo),
++				pwdinfo->p2p_peer_interface_addr[ 0 ], pwdinfo->p2p_peer_interface_addr[ 1 ], pwdinfo->p2p_peer_interface_addr[ 2 ],
++				pwdinfo->p2p_peer_interface_addr[ 3 ], pwdinfo->p2p_peer_interface_addr[ 4 ], pwdinfo->p2p_peer_interface_addr[ 5 ]);
++	}
++ 
++	//	Commented by Albert 2010/10/12
++	//	Because of the output size limitation, I had removed the "Role" information.
++	//	About the "Role" information, we will use the new private IOCTL to get the "Role" information.
++	sprintf( extra, "\n\nStatus=%.2d\n", rtw_p2p_state(pwdinfo) );
++	wrqu->data.length = strlen( extra );
++
++	return ret;
++		
++}
++
++//	Commented by Albert 20110520
++//	This function will return the config method description 
++//	This config method description will show us which config method the remote P2P device is intented to use
++//	by sending the provisioning discovery request frame.
++
++static int rtw_p2p_get_req_cm(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	
++	int ret = 0;	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct iw_point *pdata = &wrqu->data;
++	struct wifidirect_info	*pwdinfo = &( padapter->wdinfo );
++
++	sprintf( extra, "\n\nCM=%s\n", pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req );
++	wrqu->data.length = strlen( extra );
++	return ret;
++		
++}
++
++
++static int rtw_p2p_get_role(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	
++	int ret = 0;	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct iw_point *pdata = &wrqu->data;
++	struct wifidirect_info	*pwdinfo = &( padapter->wdinfo );
++
++	
++	DBG_871X( "[%s] Role = %d, Status = %d, peer addr = %.2X:%.2X:%.2X:%.2X:%.2X:%.2X\n", __FUNCTION__, rtw_p2p_role(pwdinfo), rtw_p2p_state(pwdinfo),
++			pwdinfo->p2p_peer_interface_addr[ 0 ], pwdinfo->p2p_peer_interface_addr[ 1 ], pwdinfo->p2p_peer_interface_addr[ 2 ],
++			pwdinfo->p2p_peer_interface_addr[ 3 ], pwdinfo->p2p_peer_interface_addr[ 4 ], pwdinfo->p2p_peer_interface_addr[ 5 ]);
++
++	sprintf( extra, "\n\nRole=%.2d\n", rtw_p2p_role(pwdinfo) );
++	wrqu->data.length = strlen( extra );
++	return ret;
++		
++}
++
++
++static int rtw_p2p_get_peer_ifaddr(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	
++	int ret = 0;	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct iw_point *pdata = &wrqu->data;
++	struct wifidirect_info	*pwdinfo = &( padapter->wdinfo );
++
++
++	DBG_871X( "[%s] Role = %d, Status = %d, peer addr = %.2X:%.2X:%.2X:%.2X:%.2X:%.2X\n", __FUNCTION__, rtw_p2p_role(pwdinfo), rtw_p2p_state(pwdinfo),
++			pwdinfo->p2p_peer_interface_addr[ 0 ], pwdinfo->p2p_peer_interface_addr[ 1 ], pwdinfo->p2p_peer_interface_addr[ 2 ],
++			pwdinfo->p2p_peer_interface_addr[ 3 ], pwdinfo->p2p_peer_interface_addr[ 4 ], pwdinfo->p2p_peer_interface_addr[ 5 ]);
++
++	sprintf( extra, "\nMAC %.2X:%.2X:%.2X:%.2X:%.2X:%.2X",
++			pwdinfo->p2p_peer_interface_addr[ 0 ], pwdinfo->p2p_peer_interface_addr[ 1 ], pwdinfo->p2p_peer_interface_addr[ 2 ],
++			pwdinfo->p2p_peer_interface_addr[ 3 ], pwdinfo->p2p_peer_interface_addr[ 4 ], pwdinfo->p2p_peer_interface_addr[ 5 ]);
++	wrqu->data.length = strlen( extra );
++	return ret;
++		
++}
++
++static int rtw_p2p_get_peer_devaddr(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++
++{
++	
++	int ret = 0;	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct iw_point *pdata = &wrqu->data;
++	struct wifidirect_info	*pwdinfo = &( padapter->wdinfo );
++
++	DBG_871X( "[%s] Role = %d, Status = %d, peer addr = %.2X:%.2X:%.2X:%.2X:%.2X:%.2X\n", __FUNCTION__, rtw_p2p_role(pwdinfo), rtw_p2p_state(pwdinfo),
++			pwdinfo->rx_prov_disc_info.peerDevAddr[ 0 ], pwdinfo->rx_prov_disc_info.peerDevAddr[ 1 ], 
++			pwdinfo->rx_prov_disc_info.peerDevAddr[ 2 ], pwdinfo->rx_prov_disc_info.peerDevAddr[ 3 ],
++			pwdinfo->rx_prov_disc_info.peerDevAddr[ 4 ], pwdinfo->rx_prov_disc_info.peerDevAddr[ 5 ]);
++	sprintf( extra, "\n%.2X%.2X%.2X%.2X%.2X%.2X",
++			pwdinfo->rx_prov_disc_info.peerDevAddr[ 0 ], pwdinfo->rx_prov_disc_info.peerDevAddr[ 1 ], 
++			pwdinfo->rx_prov_disc_info.peerDevAddr[ 2 ], pwdinfo->rx_prov_disc_info.peerDevAddr[ 3 ],
++			pwdinfo->rx_prov_disc_info.peerDevAddr[ 4 ], pwdinfo->rx_prov_disc_info.peerDevAddr[ 5 ]);
++	wrqu->data.length = strlen( extra );	
++	return ret;
++		
++}
++
++static int rtw_p2p_get_peer_devaddr_by_invitation(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++
++{
++	
++	int ret = 0;	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct iw_point *pdata = &wrqu->data;
++	struct wifidirect_info	*pwdinfo = &( padapter->wdinfo );
++
++	DBG_871X( "[%s] Role = %d, Status = %d, peer addr = %.2X:%.2X:%.2X:%.2X:%.2X:%.2X\n", __FUNCTION__, rtw_p2p_role(pwdinfo), rtw_p2p_state(pwdinfo),
++			pwdinfo->p2p_peer_device_addr[ 0 ], pwdinfo->p2p_peer_device_addr[ 1 ], 
++			pwdinfo->p2p_peer_device_addr[ 2 ], pwdinfo->p2p_peer_device_addr[ 3 ],
++			pwdinfo->p2p_peer_device_addr[ 4 ], pwdinfo->p2p_peer_device_addr[ 5 ]);
++	sprintf( extra, "\nMAC %.2X:%.2X:%.2X:%.2X:%.2X:%.2X",
++			pwdinfo->p2p_peer_device_addr[ 0 ], pwdinfo->p2p_peer_device_addr[ 1 ], 
++			pwdinfo->p2p_peer_device_addr[ 2 ], pwdinfo->p2p_peer_device_addr[ 3 ],
++			pwdinfo->p2p_peer_device_addr[ 4 ], pwdinfo->p2p_peer_device_addr[ 5 ]);
++	wrqu->data.length = strlen( extra );	
++	return ret;
++		
++}
++
++static int rtw_p2p_get_groupid(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++
++{
++	
++	int ret = 0;	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct iw_point *pdata = &wrqu->data;
++	struct wifidirect_info	*pwdinfo = &( padapter->wdinfo );
++
++	sprintf( extra, "\n%.2X:%.2X:%.2X:%.2X:%.2X:%.2X %s",
++			pwdinfo->groupid_info.go_device_addr[ 0 ], pwdinfo->groupid_info.go_device_addr[ 1 ], 
++			pwdinfo->groupid_info.go_device_addr[ 2 ], pwdinfo->groupid_info.go_device_addr[ 3 ],
++			pwdinfo->groupid_info.go_device_addr[ 4 ], pwdinfo->groupid_info.go_device_addr[ 5 ],
++			pwdinfo->groupid_info.ssid);
++	wrqu->data.length = strlen( extra );	
++	return ret;
++		
++}
++
++static int rtw_p2p_get_op_ch(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++
++{
++	
++	int ret = 0;	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct iw_point *pdata = &wrqu->data;
++	struct wifidirect_info	*pwdinfo = &( padapter->wdinfo );
++
++	
++	DBG_871X( "[%s] Op_ch = %02x\n", __FUNCTION__, pwdinfo->operating_channel);
++	
++	sprintf( extra, "\n\nOp_ch=%.2d\n", pwdinfo->operating_channel );
++	wrqu->data.length = strlen( extra );
++	return ret;
++		
++}
++
++inline static void macstr2num(u8 *dst, u8 *src)
++{
++	int	jj, kk;
++	for (jj = 0, kk = 0; jj < ETH_ALEN; jj++, kk += 3)
++	{
++		dst[jj] = key_2char2num(src[kk], src[kk + 1]);
++	}
++}
++
++static int rtw_p2p_get_wps_configmethod(struct net_device *dev,
++										struct iw_request_info *info,
++										union iwreq_data *wrqu, char *extra, char *subcmd)
++{ 
++	
++	int ret = 0;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	u8 peerMAC[ETH_ALEN] = { 0x00 };
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	_irqL irqL;
++	_list * plist,*phead;
++	_queue *queue = &(pmlmepriv->scanned_queue);
++	struct wlan_network *pnetwork = NULL;
++	u8 blnMatch = 0;
++	u16	attr_content = 0;
++	uint attr_contentlen = 0;
++	u8	attr_content_str[P2P_PRIVATE_IOCTL_SET_LEN] = { 0x00 };
++
++	//	Commented by Albert 20110727
++	//	The input data is the MAC address which the application wants to know its WPS config method.
++	//	After knowing its WPS config method, the application can decide the config method for provisioning discovery.
++	//	Format: iwpriv wlanx p2p_get_wpsCM 00:E0:4C:00:00:05
++
++	DBG_871X("[%s] data = %s\n", __FUNCTION__, subcmd);
++
++	macstr2num(peerMAC, subcmd);
++
++	_enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++
++	phead = get_list_head(queue);
++	plist = get_next(phead);
++
++	while (1)
++	{
++		if (rtw_end_of_queue_search(phead, plist) == _TRUE) break;
++
++		pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list);
++		if (_rtw_memcmp(pnetwork->network.MacAddress, peerMAC, ETH_ALEN))
++		{
++			u8 *wpsie;
++			uint	wpsie_len = 0;
++
++			//	The mac address is matched.
++
++			if ((wpsie = rtw_get_wps_ie(&pnetwork->network.IEs[12], pnetwork->network.IELength - 12, NULL, &wpsie_len)))
++			{
++				rtw_get_wps_attr_content(wpsie, wpsie_len, WPS_ATTR_CONF_METHOD, (u8 *)&attr_content, &attr_contentlen);
++				if (attr_contentlen)
++				{
++					attr_content = be16_to_cpu(attr_content);
++					sprintf(attr_content_str, "\n\nM=%.4d", attr_content);
++					blnMatch = 1;
++				}
++			}
++
++			break;
++		}
++
++		plist = get_next(plist);
++
++	}
++
++	_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++
++	if (!blnMatch)
++	{
++		sprintf(attr_content_str, "\n\nM=0000");
++	}
++
++	wrqu->data.length = strlen(attr_content_str);
++	_rtw_memcpy(extra, attr_content_str, wrqu->data.length);
++
++	return ret; 
++		
++}
++
++#ifdef CONFIG_WFD
++static int rtw_p2p_get_peer_wfd_port(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	
++	int ret = 0;	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct iw_point *pdata = &wrqu->data;
++	struct wifidirect_info	*pwdinfo = &( padapter->wdinfo );
++
++	DBG_871X( "[%s] p2p_state = %d\n", __FUNCTION__, rtw_p2p_state(pwdinfo) );
++
++	sprintf( extra, "\n\nPort=%d\n", pwdinfo->wfd_info->peer_rtsp_ctrlport );
++	DBG_871X( "[%s] remote port = %d\n", __FUNCTION__, pwdinfo->wfd_info->peer_rtsp_ctrlport );
++	
++	wrqu->data.length = strlen( extra );
++	return ret;
++		
++}
++
++static int rtw_p2p_get_peer_wfd_preferred_connection(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	
++	int ret = 0;	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct iw_point *pdata = &wrqu->data;
++	struct wifidirect_info	*pwdinfo = &( padapter->wdinfo );
++
++	sprintf( extra, "\n\nwfd_pc=%d\n", pwdinfo->wfd_info->wfd_pc );
++	DBG_871X( "[%s] wfd_pc = %d\n", __FUNCTION__, pwdinfo->wfd_info->wfd_pc );
++
++	wrqu->data.length = strlen( extra );
++	pwdinfo->wfd_info->wfd_pc = _FALSE;	//	Reset the WFD preferred connection to P2P
++	return ret;
++		
++}
++
++static int rtw_p2p_get_peer_wfd_session_available(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	
++	int ret = 0;	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct iw_point *pdata = &wrqu->data;
++	struct wifidirect_info	*pwdinfo = &( padapter->wdinfo );
++
++	sprintf( extra, "\n\nwfd_sa=%d\n", pwdinfo->wfd_info->peer_session_avail );
++	DBG_871X( "[%s] wfd_sa = %d\n", __FUNCTION__, pwdinfo->wfd_info->peer_session_avail );
++
++	wrqu->data.length = strlen( extra );
++	pwdinfo->wfd_info->peer_session_avail = _TRUE;	//	Reset the WFD session available
++	return ret;
++		
++}
++
++#endif // CONFIG_WFD
++
++static int rtw_p2p_get_go_device_address(struct net_device *dev,
++										 struct iw_request_info *info,
++										 union iwreq_data *wrqu, char *extra, char *subcmd)
++{
++
++	int ret = 0;	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	u8 peerMAC[ETH_ALEN] = { 0x00 };
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	_irqL irqL;
++	_list *plist, *phead;
++	_queue *queue	= &(pmlmepriv->scanned_queue);
++	struct wlan_network *pnetwork = NULL;
++	u8 blnMatch = 0;
++	u8 *p2pie;
++	uint p2pielen = 0, attr_contentlen = 0;
++	u8 attr_content[100] = { 0x00 };
++	u8 go_devadd_str[P2P_PRIVATE_IOCTL_SET_LEN] = { 0x00 };
++
++	//	Commented by Albert 20121209
++	//	The input data is the GO's interface address which the application wants to know its device address.
++	//	Format: iwpriv wlanx p2p_get2 go_devadd=00:E0:4C:00:00:05
++
++	DBG_871X("[%s] data = %s\n", __FUNCTION__, subcmd);
++
++	macstr2num(peerMAC, subcmd);
++
++	_enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++
++	phead = get_list_head(queue);
++	plist = get_next(phead);
++
++	while (1)
++	{
++		if (rtw_end_of_queue_search(phead, plist) == _TRUE) break;
++
++		pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list);
++		if (_rtw_memcmp(pnetwork->network.MacAddress, peerMAC, ETH_ALEN))
++		{
++			//	Commented by Albert 2011/05/18
++			//	Match the device address located in the P2P IE
++			//	This is for the case that the P2P device address is not the same as the P2P interface address.
++
++			if ((p2pie = rtw_get_p2p_ie(&pnetwork->network.IEs[12], pnetwork->network.IELength - 12, NULL, &p2pielen)))
++			{
++				while (p2pie)
++				{
++					//	The P2P Device ID attribute is included in the Beacon frame.
++					//	The P2P Device Info attribute is included in the probe response frame.
++
++					_rtw_memset(attr_content, 0x00, 100);
++					if (rtw_get_p2p_attr_content(p2pie, p2pielen, P2P_ATTR_DEVICE_ID, attr_content, &attr_contentlen))
++					{
++						//	Handle the P2P Device ID attribute of Beacon first
++						blnMatch = 1;
++						break;
++
++					} else if (rtw_get_p2p_attr_content(p2pie, p2pielen, P2P_ATTR_DEVICE_INFO, attr_content, &attr_contentlen))
++					{
++						//	Handle the P2P Device Info attribute of probe response
++						blnMatch = 1;
++						break;
++					}
++
++					//Get the next P2P IE
++					p2pie = rtw_get_p2p_ie(p2pie + p2pielen, pnetwork->network.IELength - 12 - (p2pie - &pnetwork->network.IEs[12] + p2pielen), NULL, &p2pielen);
++				}
++			}
++		}
++
++		plist = get_next(plist);
++
++	}
++
++	_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++
++	if (!blnMatch)
++	{
++		sprintf(go_devadd_str, "\n\ndev_add=NULL");
++	} else
++	{
++		sprintf(go_devadd_str, "\n\ndev_add=%.2X:%.2X:%.2X:%.2X:%.2X:%.2X",
++				attr_content[0], attr_content[1], attr_content[2], attr_content[3], attr_content[4], attr_content[5]);
++	}
++
++	wrqu->data.length = strlen(go_devadd_str);
++	_rtw_memcpy(extra, go_devadd_str, wrqu->data.length);
++
++	return ret; 
++		
++}
++
++static int rtw_p2p_get_device_type(struct net_device *dev,
++								   struct iw_request_info *info,
++								   union iwreq_data *wrqu, char *extra, char *subcmd)
++{ 
++	
++	int ret = 0;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	u8 peerMAC[ETH_ALEN] = { 0x00 };
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	_irqL irqL;
++	_list *plist, *phead;
++	_queue *queue = &(pmlmepriv->scanned_queue);
++	struct wlan_network *pnetwork = NULL;
++	u8 blnMatch = 0;
++	u8 dev_type[8] = { 0x00 };
++	uint dev_type_len = 0;
++	u8 dev_type_str[P2P_PRIVATE_IOCTL_SET_LEN] = { 0x00 };    // +9 is for the str "dev_type=", we have to clear it at wrqu->data.pointer
++
++	//	Commented by Albert 20121209
++	//	The input data is the MAC address which the application wants to know its device type.
++	//	Such user interface could know the device type.
++	//	Format: iwpriv wlanx p2p_get2 dev_type=00:E0:4C:00:00:05
++
++	DBG_871X("[%s] data = %s\n", __FUNCTION__, subcmd);
++
++	macstr2num(peerMAC, subcmd);
++
++	_enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++
++	phead = get_list_head(queue);
++	plist = get_next(phead);
++
++	while (1)
++	{
++		if (rtw_end_of_queue_search(phead, plist) == _TRUE) break;
++
++		pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list);
++		if (_rtw_memcmp(pnetwork->network.MacAddress, peerMAC, ETH_ALEN))
++		{
++			u8 *wpsie;
++			uint	wpsie_len = 0;
++
++			//	The mac address is matched.
++
++			if ((wpsie = rtw_get_wps_ie(&pnetwork->network.IEs[12], pnetwork->network.IELength - 12, NULL, &wpsie_len)))
++			{
++				rtw_get_wps_attr_content(wpsie, wpsie_len, WPS_ATTR_PRIMARY_DEV_TYPE, dev_type, &dev_type_len);
++				if (dev_type_len)
++				{
++					u16	type = 0;
++
++					_rtw_memcpy(&type, dev_type, 2);
++					type = be16_to_cpu(type);
++					sprintf(dev_type_str, "\n\nN=%.2d", type);
++					blnMatch = 1;
++				}
++			}
++			break;
++		}
++
++		plist = get_next(plist);
++
++	}
++
++	_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++
++	if (!blnMatch)
++	{
++		sprintf(dev_type_str, "\n\nN=00");
++	}
++
++	wrqu->data.length = strlen(dev_type_str);
++	_rtw_memcpy(extra, dev_type_str, wrqu->data.length);
++
++	return ret; 
++		
++}
++
++static int rtw_p2p_get_device_name(struct net_device *dev,
++								   struct iw_request_info *info,
++								   union iwreq_data *wrqu, char *extra, char *subcmd)
++{ 
++	
++	int ret = 0;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	u8 peerMAC[ETH_ALEN] = { 0x00 };
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	_irqL irqL;
++	_list *plist, *phead;
++	_queue *queue = &(pmlmepriv->scanned_queue);
++	struct wlan_network *pnetwork = NULL;
++	u8 blnMatch = 0;
++	u8 dev_name[WPS_MAX_DEVICE_NAME_LEN] = { 0x00 };
++	uint dev_len = 0;
++	u8 dev_name_str[P2P_PRIVATE_IOCTL_SET_LEN] = { 0x00 };
++
++	//	Commented by Albert 20121225
++	//	The input data is the MAC address which the application wants to know its device name.
++	//	Such user interface could show peer device's device name instead of ssid.
++	//	Format: iwpriv wlanx p2p_get2 devN=00:E0:4C:00:00:05
++
++	DBG_871X("[%s] data = %s\n", __FUNCTION__, subcmd);
++
++	macstr2num(peerMAC, subcmd);
++
++	_enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++
++	phead = get_list_head(queue);
++	plist = get_next(phead);
++
++	while (1)
++	{
++		if (rtw_end_of_queue_search(phead, plist) == _TRUE) break;
++
++		pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list);
++		if (_rtw_memcmp(pnetwork->network.MacAddress, peerMAC, ETH_ALEN))
++		{
++			u8 *wpsie;
++			uint	wpsie_len = 0;
++
++			//	The mac address is matched.
++
++			if ((wpsie = rtw_get_wps_ie(&pnetwork->network.IEs[12], pnetwork->network.IELength - 12, NULL, &wpsie_len)))
++			{
++				rtw_get_wps_attr_content(wpsie, wpsie_len, WPS_ATTR_DEVICE_NAME, dev_name, &dev_len);
++				if (dev_len)
++				{
++					sprintf(dev_name_str, "\n\nN=%s", dev_name);
++					blnMatch = 1;
++				}
++			}
++			break;
++		}
++
++		plist = get_next(plist);
++
++	}
++
++	_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++
++	if (!blnMatch)
++	{
++		sprintf(dev_name_str, "\n\nN=0000");
++	}
++
++	wrqu->data.length = strlen(dev_name_str);
++	_rtw_memcpy(extra, dev_name_str, wrqu->data.length);
++
++	return ret; 
++		
++}
++
++static int rtw_p2p_get_invitation_procedure(struct net_device *dev,
++											struct iw_request_info *info,
++											union iwreq_data *wrqu, char *extra, char *subcmd)
++{
++
++	int ret = 0;	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	u8 peerMAC[ETH_ALEN] = { 0x00 };
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	_irqL irqL;
++	_list *plist, *phead;
++	_queue *queue	= &(pmlmepriv->scanned_queue);
++	struct wlan_network *pnetwork = NULL;
++	u8 blnMatch = 0;
++	u8 *p2pie;
++	uint p2pielen = 0, attr_contentlen = 0;
++	u8 attr_content[2] = { 0x00 };
++	u8 inv_proc_str[P2P_PRIVATE_IOCTL_SET_LEN] = { 0x00 };
++
++	//	Commented by Ouden 20121226
++	//	The application wants to know P2P initation procedure is support or not.
++	//	Format: iwpriv wlanx p2p_get2 InvProc=00:E0:4C:00:00:05
++
++	DBG_871X("[%s] data = %s\n", __FUNCTION__, subcmd);
++
++	macstr2num(peerMAC, subcmd);
++
++	_enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++
++	phead = get_list_head(queue);
++	plist = get_next(phead);
++
++	while (1)
++	{
++		if (rtw_end_of_queue_search(phead, plist) == _TRUE) break;
++
++		pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list);
++		if (_rtw_memcmp(pnetwork->network.MacAddress, peerMAC, ETH_ALEN))
++		{
++			//	Commented by Albert 20121226
++			//	Match the device address located in the P2P IE
++			//	This is for the case that the P2P device address is not the same as the P2P interface address.
++
++			if ((p2pie = rtw_get_p2p_ie(&pnetwork->network.IEs[12], pnetwork->network.IELength - 12, NULL, &p2pielen)))
++			{
++				while (p2pie)
++				{
++					//_rtw_memset( attr_content, 0x00, 2);
++					if (rtw_get_p2p_attr_content(p2pie, p2pielen, P2P_ATTR_CAPABILITY, attr_content, &attr_contentlen))
++					{
++						//	Handle the P2P capability attribute
++						blnMatch = 1;
++						break;
++
++					}
++
++					//Get the next P2P IE
++					p2pie = rtw_get_p2p_ie(p2pie + p2pielen, pnetwork->network.IELength - 12 - (p2pie - &pnetwork->network.IEs[12] + p2pielen), NULL, &p2pielen);
++				}
++			}
++		}
++
++		plist = get_next(plist);
++
++	}
++
++	_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++
++	if (!blnMatch)
++	{
++		sprintf(inv_proc_str, "\nIP=-1");
++	} else
++	{
++		if (attr_content[0] && 0x20)
++		{
++			sprintf(inv_proc_str, "\nIP=1");
++		} else
++		{
++			sprintf(inv_proc_str, "\nIP=0");
++		}
++	}
++
++	wrqu->data.length = strlen(inv_proc_str);
++	_rtw_memcpy(extra, inv_proc_str, wrqu->data.length);
++
++	return ret; 
++		
++}
++
++static int rtw_p2p_connect(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	
++	int ret = 0;	
++	_adapter 				*padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct wifidirect_info	*pwdinfo = &( padapter->wdinfo );
++	u8					peerMAC[ ETH_ALEN ] = { 0x00 };
++	int 					jj,kk;
++	u8   					peerMACStr[ ETH_ALEN * 2 ] = { 0x00 };
++	struct mlme_priv		*pmlmepriv = &padapter->mlmepriv;
++	_irqL				irqL;
++	_list					*plist, *phead;
++	_queue				*queue	= &(pmlmepriv->scanned_queue);
++	struct	wlan_network	*pnetwork = NULL;
++	uint					uintPeerChannel = 0;
++#ifdef CONFIG_CONCURRENT_MODE
++	_adapter				*pbuddy_adapter = padapter->pbuddy_adapter;
++	struct mlme_ext_priv	*pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++#endif // CONFIG_CONCURRENT_MODE	
++	
++	
++	//	Commented by Albert 20110304
++	//	The input data contains two informations.
++	//	1. First information is the MAC address which wants to formate with
++	//	2. Second information is the WPS PINCode or "pbc" string for push button method
++	//	Format: 00:E0:4C:00:00:05
++	//	Format: 00:E0:4C:00:00:05
++
++	DBG_871X( "[%s] data = %s\n", __FUNCTION__, extra );
++
++	if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++	{
++		DBG_871X( "[%s] WiFi Direct is disable!\n", __FUNCTION__ );
++		return ret;
++	}
++	
++	if ( pwdinfo->ui_got_wps_info == P2P_NO_WPSINFO )
++	{
++		return -1;
++	}
++	
++	for( jj = 0, kk = 0; jj < ETH_ALEN; jj++, kk += 3 )
++	{
++		peerMAC[ jj ] = key_2char2num( extra[kk], extra[kk+ 1] );
++	}
++
++	_enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++
++	phead = get_list_head(queue);
++	plist = get_next(phead);
++       
++	while(1)
++	{
++		if (rtw_end_of_queue_search(phead,plist)== _TRUE)
++			break;
++
++		pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list);
++		if ( _rtw_memcmp( pnetwork->network.MacAddress, peerMAC, ETH_ALEN ) )
++		{
++			uintPeerChannel = pnetwork->network.Configuration.DSConfig;
++			break;
++              }
++
++		plist = get_next(plist);
++	
++	}        
++
++	_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++
++	if ( uintPeerChannel )
++	{
++#ifdef CONFIG_CONCURRENT_MODE
++		if ( check_buddy_fwstate(padapter, _FW_LINKED ) )
++		{
++			_cancel_timer_ex( &pwdinfo->ap_p2p_switch_timer );
++		}
++#endif // CONFIG_CONCURRENT_MODE
++
++		_rtw_memset( &pwdinfo->nego_req_info, 0x00, sizeof( struct tx_nego_req_info ) );
++		_rtw_memset( &pwdinfo->groupid_info, 0x00, sizeof( struct group_id_info ) );
++		
++		pwdinfo->nego_req_info.peer_channel_num[ 0 ] = uintPeerChannel;
++		_rtw_memcpy( pwdinfo->nego_req_info.peerDevAddr, pnetwork->network.MacAddress, ETH_ALEN );
++		pwdinfo->nego_req_info.benable = _TRUE;
++
++		_cancel_timer_ex( &pwdinfo->restore_p2p_state_timer );
++		if ( rtw_p2p_state(pwdinfo) != P2P_STATE_GONEGO_OK )
++		{
++			//	Restore to the listen state if the current p2p state is not nego OK
++			rtw_p2p_set_state(pwdinfo, P2P_STATE_LISTEN );
++		}
++
++		rtw_p2p_set_pre_state(pwdinfo, rtw_p2p_state(pwdinfo));
++		rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_ING);
++		
++#ifdef CONFIG_CONCURRENT_MODE
++		if ( check_buddy_fwstate(padapter, _FW_LINKED ) )
++		{
++			//	Have to enter the power saving with the AP
++			set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode);
++			
++			issue_nulldata(pbuddy_adapter, NULL, 1, 3, 500);
++		}
++#endif // CONFIG_CONCURRENT_MODE
++
++		DBG_871X( "[%s] Start PreTx Procedure!\n", __FUNCTION__ );
++		_set_timer( &pwdinfo->pre_tx_scan_timer, P2P_TX_PRESCAN_TIMEOUT );
++		
++#ifdef CONFIG_CONCURRENT_MODE
++		if ( check_buddy_fwstate(padapter, _FW_LINKED ) )
++		{
++			_set_timer( &pwdinfo->restore_p2p_state_timer, P2P_CONCURRENT_GO_NEGO_TIMEOUT );
++		}
++		else
++		{
++			_set_timer( &pwdinfo->restore_p2p_state_timer, P2P_GO_NEGO_TIMEOUT );
++		}
++#else
++		_set_timer( &pwdinfo->restore_p2p_state_timer, P2P_GO_NEGO_TIMEOUT );
++#endif // CONFIG_CONCURRENT_MODE		
++
++	}
++	else
++	{
++		DBG_871X( "[%s] Not Found in Scanning Queue~\n", __FUNCTION__ );
++		ret = -1;
++	}
++exit:	
++	return ret;
++}
++
++static int rtw_p2p_invite_req(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	
++	int ret = 0;	
++	_adapter 					*padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct iw_point 			*pdata = &wrqu->data;
++	struct wifidirect_info		*pwdinfo = &( padapter->wdinfo );
++	int 						jj,kk;
++	u8   						peerMACStr[ ETH_ALEN * 2 ] = { 0x00 };
++	struct mlme_priv			*pmlmepriv = &padapter->mlmepriv;
++	_list						*plist, *phead;
++	_queue					*queue	= &(pmlmepriv->scanned_queue);
++	struct	wlan_network		*pnetwork = NULL;
++	uint						uintPeerChannel = 0;
++	u8						attr_content[50] = { 0x00 }, _status = 0;
++	u8 						*p2pie;
++	uint						p2pielen = 0, attr_contentlen = 0;
++	_irqL					irqL;
++	struct tx_invite_req_info*	pinvite_req_info = &pwdinfo->invitereq_info;
++#ifdef CONFIG_CONCURRENT_MODE
++	_adapter					*pbuddy_adapter = padapter->pbuddy_adapter;
++	struct mlme_priv			*pbuddy_mlmepriv = &pbuddy_adapter->mlmepriv;
++	struct mlme_ext_priv		*pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++#endif // CONFIG_CONCURRENT_MODE
++
++#ifdef CONFIG_WFD
++	struct wifi_display_info*	pwfd_info = pwdinfo->wfd_info;
++#endif // CONFIG_WFD
++	
++	//	Commented by Albert 20120321
++	//	The input data contains two informations.
++	//	1. First information is the P2P device address which you want to send to.	
++	//	2. Second information is the group id which combines with GO's mac address, space and GO's ssid.
++	//	Command line sample: iwpriv wlan0 p2p_set invite="00:11:22:33:44:55 00:E0:4C:00:00:05 DIRECT-xy"
++	//	Format: 00:11:22:33:44:55 00:E0:4C:00:00:05 DIRECT-xy
++
++	DBG_871X( "[%s] data = %s\n", __FUNCTION__, extra );
++
++	if ( wrqu->data.length <=  37 )
++	{
++		DBG_871X( "[%s] Wrong format!\n", __FUNCTION__ );
++		return ret;
++	}
++
++	if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++	{
++		DBG_871X( "[%s] WiFi Direct is disable!\n", __FUNCTION__ );
++		return ret;
++	}
++	else
++	{
++		//	Reset the content of struct tx_invite_req_info
++		pinvite_req_info->benable = _FALSE;
++		_rtw_memset( pinvite_req_info->go_bssid, 0x00, ETH_ALEN );
++		_rtw_memset( pinvite_req_info->go_ssid, 0x00, WLAN_SSID_MAXLEN );
++		pinvite_req_info->ssidlen = 0x00;
++		pinvite_req_info->operating_ch = pwdinfo->operating_channel;
++		_rtw_memset( pinvite_req_info->peer_macaddr, 0x00, ETH_ALEN );
++		pinvite_req_info->token = 3;
++	}
++	
++	for( jj = 0, kk = 0; jj < ETH_ALEN; jj++, kk += 3 )
++	{
++		pinvite_req_info->peer_macaddr[ jj ] = key_2char2num( extra[kk], extra[kk+ 1] );
++	}
++
++	_enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++
++	phead = get_list_head(queue);
++	plist = get_next(phead);
++       
++	while(1)
++	{
++		if (rtw_end_of_queue_search(phead,plist)== _TRUE)
++			break;
++
++		pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list);
++
++		//	Commented by Albert 2011/05/18
++		//	Match the device address located in the P2P IE
++		//	This is for the case that the P2P device address is not the same as the P2P interface address.
++
++		if ( (p2pie=rtw_get_p2p_ie( &pnetwork->network.IEs[12], pnetwork->network.IELength - 12, NULL, &p2pielen)) )
++		{
++			//	The P2P Device ID attribute is included in the Beacon frame.
++			//	The P2P Device Info attribute is included in the probe response frame.
++
++			if ( rtw_get_p2p_attr_content( p2pie, p2pielen, P2P_ATTR_DEVICE_ID, attr_content, &attr_contentlen) )
++			{
++				//	Handle the P2P Device ID attribute of Beacon first
++				if ( _rtw_memcmp( attr_content, pinvite_req_info->peer_macaddr, ETH_ALEN ) )
++				{
++					uintPeerChannel = pnetwork->network.Configuration.DSConfig;
++					break;
++				}
++			}
++			else if ( rtw_get_p2p_attr_content( p2pie, p2pielen, P2P_ATTR_DEVICE_INFO, attr_content, &attr_contentlen) )
++			{
++				//	Handle the P2P Device Info attribute of probe response
++				if ( _rtw_memcmp( attr_content, pinvite_req_info->peer_macaddr, ETH_ALEN ) )
++				{
++					uintPeerChannel = pnetwork->network.Configuration.DSConfig;
++					break;
++				}					
++			}
++
++		}
++
++		plist = get_next(plist);
++	
++	}
++
++	_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++
++#ifdef CONFIG_WFD
++	if ( uintPeerChannel )
++	{
++		u8	wfd_ie[ 128 ] = { 0x00 };
++		uint	wfd_ielen = 0;
++		
++		if ( rtw_get_wfd_ie( &pnetwork->network.IEs[12], pnetwork->network.IELength - 12,  wfd_ie, &wfd_ielen ) )
++		{
++			u8	wfd_devinfo[ 6 ] = { 0x00 };
++			uint	wfd_devlen = 6;
++
++			DBG_871X( "[%s] Found WFD IE!\n", __FUNCTION__ );
++			if ( rtw_get_wfd_attr_content( wfd_ie, wfd_ielen, WFD_ATTR_DEVICE_INFO, wfd_devinfo, &wfd_devlen ) )
++			{
++				u16	wfd_devinfo_field = 0;
++				
++				//	Commented by Albert 20120319
++				//	The first two bytes are the WFD device information field of WFD device information subelement.
++				//	In big endian format.
++				wfd_devinfo_field = RTW_GET_BE16(wfd_devinfo);
++				if ( wfd_devinfo_field & WFD_DEVINFO_SESSION_AVAIL )
++				{
++					pwfd_info->peer_session_avail = _TRUE;
++				}
++				else
++				{
++					pwfd_info->peer_session_avail = _FALSE;
++				}
++			}
++		}
++		
++		if ( _FALSE == pwfd_info->peer_session_avail )
++		{
++			DBG_871X( "[%s] WFD Session not avaiable!\n", __FUNCTION__ );
++			goto exit;
++		}
++	}
++#endif // CONFIG_WFD
++
++	if ( uintPeerChannel )
++	{
++#ifdef CONFIG_CONCURRENT_MODE
++		if ( check_fwstate( pbuddy_mlmepriv, _FW_LINKED ) )
++		{
++			_cancel_timer_ex( &pwdinfo->ap_p2p_switch_timer );
++		}
++#endif // CONFIG_CONCURRENT_MODE
++
++		//	Store the GO's bssid
++		for( jj = 0, kk = 18; jj < ETH_ALEN; jj++, kk += 3 )
++		{
++			pinvite_req_info->go_bssid[ jj ] = key_2char2num( extra[kk], extra[kk+ 1] );
++		}
++
++		//	Store the GO's ssid
++		pinvite_req_info->ssidlen = wrqu->data.length - 36;
++		_rtw_memcpy( pinvite_req_info->go_ssid, &extra[ 36 ], (u32) pinvite_req_info->ssidlen );
++		pinvite_req_info->benable = _TRUE;
++		pinvite_req_info->peer_ch = uintPeerChannel;
++
++		rtw_p2p_set_pre_state(pwdinfo, rtw_p2p_state(pwdinfo));
++		rtw_p2p_set_state(pwdinfo, P2P_STATE_TX_INVITE_REQ);
++
++#ifdef CONFIG_CONCURRENT_MODE
++		if ( check_fwstate( pbuddy_mlmepriv, _FW_LINKED ) )
++		{
++			//	Have to enter the power saving with the AP
++			set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode);
++			
++			issue_nulldata(pbuddy_adapter, NULL, 1, 3, 500);
++		}
++		else
++		{
++			set_channel_bwmode(padapter, uintPeerChannel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
++		}
++#else
++		set_channel_bwmode(padapter, uintPeerChannel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
++#endif
++
++		_set_timer( &pwdinfo->pre_tx_scan_timer, P2P_TX_PRESCAN_TIMEOUT );
++		
++#ifdef CONFIG_CONCURRENT_MODE
++		if ( check_fwstate( pbuddy_mlmepriv, _FW_LINKED ) )
++		{
++			_set_timer( &pwdinfo->restore_p2p_state_timer, P2P_CONCURRENT_INVITE_TIMEOUT );
++		}
++		else
++		{
++			_set_timer( &pwdinfo->restore_p2p_state_timer, P2P_INVITE_TIMEOUT );
++		}
++#else
++		_set_timer( &pwdinfo->restore_p2p_state_timer, P2P_INVITE_TIMEOUT );
++#endif // CONFIG_CONCURRENT_MODE		
++
++		
++	}
++	else
++	{
++		DBG_871X( "[%s] NOT Found in the Scanning Queue!\n", __FUNCTION__ );
++	}
++exit:
++	
++	return ret;
++		
++}
++
++static int rtw_p2p_set_persistent(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	
++	int ret = 0;	
++	_adapter 					*padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct iw_point 			*pdata = &wrqu->data;
++	struct wifidirect_info		*pwdinfo = &( padapter->wdinfo );
++	int 						jj,kk;
++	u8   						peerMACStr[ ETH_ALEN * 2 ] = { 0x00 };
++	struct mlme_priv			*pmlmepriv = &padapter->mlmepriv;
++	_list						*plist, *phead;
++	_queue					*queue	= &(pmlmepriv->scanned_queue);
++	struct	wlan_network		*pnetwork = NULL;
++	uint						uintPeerChannel = 0;
++	u8						attr_content[50] = { 0x00 }, _status = 0;
++	u8 						*p2pie;
++	uint						p2pielen = 0, attr_contentlen = 0;
++	_irqL					irqL;
++	struct tx_invite_req_info*	pinvite_req_info = &pwdinfo->invitereq_info;
++#ifdef CONFIG_CONCURRENT_MODE
++	_adapter					*pbuddy_adapter = padapter->pbuddy_adapter;
++	struct mlme_priv			*pbuddy_mlmepriv = &pbuddy_adapter->mlmepriv;
++	struct mlme_ext_priv		*pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++#endif // CONFIG_CONCURRENT_MODE
++
++#ifdef CONFIG_WFD
++	struct wifi_display_info*	pwfd_info = pwdinfo->wfd_info;
++#endif // CONFIG_WFD
++	
++	//	Commented by Albert 20120328
++	//	The input data is 0 or 1
++	//	0: disable persistent group functionality
++	//	1: enable persistent group founctionality
++	
++	DBG_871X( "[%s] data = %s\n", __FUNCTION__, extra );
++
++	if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++	{
++		DBG_871X( "[%s] WiFi Direct is disable!\n", __FUNCTION__ );
++		return ret;
++	}
++	else
++	{
++		if ( extra[ 0 ] == '0' )	//	Disable the persistent group function.
++		{
++			pwdinfo->persistent_supported = _FALSE;
++		}
++		else if ( extra[ 0 ] == '1' )	//	Enable the persistent group function.
++		{
++			pwdinfo->persistent_supported = _TRUE;
++		}
++		else
++		{
++			pwdinfo->persistent_supported = _FALSE;
++		}
++	}
++	printk( "[%s] persistent_supported = %d\n", __FUNCTION__, pwdinfo->persistent_supported );
++	
++exit:
++	
++	return ret;
++		
++}
++
++static int hexstr2bin(const char *hex, u8 *buf, size_t len)
++{
++	size_t i;
++	int a;
++	const char *ipos = hex;
++	u8 *opos = buf;
++
++	for (i = 0; i < len; i++) {
++		a = hex2byte_i(ipos);
++		if (a < 0)
++			return -1;
++		*opos++ = a;
++		ipos += 2;
++	}
++	return 0;
++}
++
++static int uuid_str2bin(const char *str, u8 *bin)
++{
++	const char *pos;
++	u8 *opos;
++
++	pos = str;
++	opos = bin;
++
++	if (hexstr2bin(pos, opos, 4))
++		return -1;
++	pos += 8;
++	opos += 4;
++
++	if (*pos++ != '-' || hexstr2bin(pos, opos, 2))
++		return -1;
++	pos += 4;
++	opos += 2;
++
++	if (*pos++ != '-' || hexstr2bin(pos, opos, 2))
++		return -1;
++	pos += 4;
++	opos += 2;
++
++	if (*pos++ != '-' || hexstr2bin(pos, opos, 2))
++		return -1;
++	pos += 4;
++	opos += 2;
++
++	if (*pos++ != '-' || hexstr2bin(pos, opos, 6))
++		return -1;
++
++	return 0;
++}
++
++static int rtw_p2p_set_wps_uuid(struct net_device *dev,
++	struct iw_request_info *info,
++	union iwreq_data *wrqu, char *extra)
++{
++
++	int ret = 0;
++	_adapter				*padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct wifidirect_info			*pwdinfo = &(padapter->wdinfo);
++
++	DBG_871X("[%s] data = %s\n", __FUNCTION__, extra);
++
++	if ((36 == strlen(extra)) && (uuid_str2bin(extra, pwdinfo->uuid) == 0)) 
++	{
++		pwdinfo->external_uuid = 1;
++	} else {
++		pwdinfo->external_uuid = 0;
++		ret = -EINVAL;
++	}
++
++	return ret;
++
++}
++#ifdef CONFIG_WFD
++static int rtw_p2p_set_pc(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	
++	int ret = 0;	
++	_adapter 				*padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct iw_point 		*pdata = &wrqu->data;
++	struct wifidirect_info	*pwdinfo = &( padapter->wdinfo );
++	u8					peerMAC[ ETH_ALEN ] = { 0x00 };
++	int 					jj,kk;
++	u8   					peerMACStr[ ETH_ALEN * 2 ] = { 0x00 };
++	struct mlme_priv		*pmlmepriv = &padapter->mlmepriv;
++	_list					*plist, *phead;
++	_queue				*queue	= &(pmlmepriv->scanned_queue);
++	struct	wlan_network	*pnetwork = NULL;
++	u8					attr_content[50] = { 0x00 }, _status = 0;
++	u8 *p2pie;
++	uint					p2pielen = 0, attr_contentlen = 0;
++	_irqL				irqL;
++	uint					uintPeerChannel = 0;
++#ifdef CONFIG_CONCURRENT_MODE
++	_adapter				*pbuddy_adapter = padapter->pbuddy_adapter;
++	struct mlme_ext_priv	*pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++#endif // CONFIG_CONCURRENT_MODE	
++	struct wifi_display_info*	pwfd_info = pwdinfo->wfd_info;
++	
++	//	Commented by Albert 20120512
++	//	1. Input information is the MAC address which wants to know the Preferred Connection bit (PC bit)
++	//	Format: 00:E0:4C:00:00:05
++
++	DBG_871X( "[%s] data = %s\n", __FUNCTION__, extra );
++
++	if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++	{
++		DBG_871X( "[%s] WiFi Direct is disable!\n", __FUNCTION__ );
++		return ret;
++	}
++	
++	for( jj = 0, kk = 0; jj < ETH_ALEN; jj++, kk += 3 )
++	{
++		peerMAC[ jj ] = key_2char2num( extra[kk], extra[kk+ 1] );
++	}
++
++	_enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++
++	phead = get_list_head(queue);
++	plist = get_next(phead);
++       
++	while(1)
++	{
++		if (rtw_end_of_queue_search(phead,plist)== _TRUE)
++			break;
++
++		pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list);
++
++		//	Commented by Albert 2011/05/18
++		//	Match the device address located in the P2P IE
++		//	This is for the case that the P2P device address is not the same as the P2P interface address.
++
++		if ( (p2pie=rtw_get_p2p_ie( &pnetwork->network.IEs[12], pnetwork->network.IELength - 12, NULL, &p2pielen)) )
++		{
++			//	The P2P Device ID attribute is included in the Beacon frame.
++			//	The P2P Device Info attribute is included in the probe response frame.
++			printk( "[%s] Got P2P IE\n", __FUNCTION__ );
++			if ( rtw_get_p2p_attr_content( p2pie, p2pielen, P2P_ATTR_DEVICE_ID, attr_content, &attr_contentlen) )
++			{
++				//	Handle the P2P Device ID attribute of Beacon first
++				printk( "[%s] P2P_ATTR_DEVICE_ID \n", __FUNCTION__ );
++				if ( _rtw_memcmp( attr_content, peerMAC, ETH_ALEN ) )
++				{
++					uintPeerChannel = pnetwork->network.Configuration.DSConfig;
++					break;
++				}
++			}
++			else if ( rtw_get_p2p_attr_content( p2pie, p2pielen, P2P_ATTR_DEVICE_INFO, attr_content, &attr_contentlen) )
++			{
++				//	Handle the P2P Device Info attribute of probe response
++				printk( "[%s] P2P_ATTR_DEVICE_INFO \n", __FUNCTION__ );
++				if ( _rtw_memcmp( attr_content, peerMAC, ETH_ALEN ) )
++				{
++					uintPeerChannel = pnetwork->network.Configuration.DSConfig;
++					break;
++				}					
++			}
++
++		}
++
++		plist = get_next(plist);
++	
++	}
++
++	_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++	printk( "[%s] channel = %d\n", __FUNCTION__, uintPeerChannel );
++
++	if ( uintPeerChannel )
++	{
++		u8	wfd_ie[ 128 ] = { 0x00 };
++		uint	wfd_ielen = 0;
++		
++		if ( rtw_get_wfd_ie( &pnetwork->network.IEs[12], pnetwork->network.IELength - 12,  wfd_ie, &wfd_ielen ) )
++		{
++			u8	wfd_devinfo[ 6 ] = { 0x00 };
++			uint	wfd_devlen = 6;
++
++			DBG_871X( "[%s] Found WFD IE!\n", __FUNCTION__ );
++			if ( rtw_get_wfd_attr_content( wfd_ie, wfd_ielen, WFD_ATTR_DEVICE_INFO, wfd_devinfo, &wfd_devlen ) )
++			{
++				u16	wfd_devinfo_field = 0;
++				
++				//	Commented by Albert 20120319
++				//	The first two bytes are the WFD device information field of WFD device information subelement.
++				//	In big endian format.
++				wfd_devinfo_field = RTW_GET_BE16(wfd_devinfo);
++				if ( wfd_devinfo_field & WFD_DEVINFO_PC_TDLS )
++				{
++					pwfd_info->wfd_pc = _TRUE;
++				}
++				else
++				{
++					pwfd_info->wfd_pc = _FALSE;
++				}
++			}
++		}
++	}	
++	else
++	{
++		DBG_871X( "[%s] NOT Found in the Scanning Queue!\n", __FUNCTION__ );
++	}
++
++exit:
++	
++	return ret;
++		
++}
++
++static int rtw_p2p_set_wfd_device_type(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	
++	int ret = 0;	
++	_adapter 					*padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct iw_point 			*pdata = &wrqu->data;
++	struct wifidirect_info		*pwdinfo = &( padapter->wdinfo );
++	struct wifi_display_info		*pwfd_info = pwdinfo->wfd_info;
++
++	//	Commented by Albert 20120328
++	//	The input data is 0 or 1
++	//	0: specify to Miracast source device
++	//	1 or others: specify to Miracast sink device (display device)
++	
++	DBG_871X( "[%s] data = %s\n", __FUNCTION__, extra );
++
++	if ( extra[ 0 ] == '0' )	//	Set to Miracast source device.
++	{
++		pwfd_info->wfd_device_type = WFD_DEVINFO_SOURCE;
++	}
++	else					//	Set to Miracast sink device.
++	{
++		pwfd_info->wfd_device_type = WFD_DEVINFO_PSINK;
++	}
++	
++exit:
++
++	return ret;
++		
++}
++
++static int rtw_p2p_set_scan_result_type(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	
++	int ret = 0;	
++	_adapter 					*padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct iw_point 			*pdata = &wrqu->data;
++	struct wifidirect_info		*pwdinfo = &( padapter->wdinfo );
++	struct wifi_display_info		*pwfd_info = pwdinfo->wfd_info;
++	
++	//	Commented by Albert 20120328
++	//	The input data is 0 , 1 , 2
++	//	0: when the P2P is enabled, the scan result will return all the found P2P device.
++	//	1: when the P2P is enabled, the scan result will return all the found P2P device and AP.
++	//	2: when the P2P is enabled, the scan result will show up the found Miracast devices base on...
++	//	It will show up all the Miracast source device if this device is sink.
++	//	It will show up all the Miracast sink device if this device is source.
++	
++	DBG_871X( "[%s] data = %s\n", __FUNCTION__, extra );
++
++	if ( extra[ 0 ] == '0' )
++	{
++		pwfd_info->scan_result_type = SCAN_RESULT_P2P_ONLY;
++	}
++	else if ( extra[ 0 ] == '1' )
++	{
++		pwfd_info->scan_result_type = SCAN_RESULT_ALL;
++	}
++	else if ( extra[ 0 ] == '2' )
++	{
++		pwfd_info->scan_result_type = SCAN_RESULT_WFD_TYPE;
++	}
++	else
++	{
++		pwfd_info->scan_result_type = SCAN_RESULT_P2P_ONLY;
++	}
++	
++exit:
++	
++	return ret;
++		
++}
++
++static int rtw_p2p_set_wfd_enable(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++//	Commented by Kurt 20121206
++//	This function is used to set wfd enabled
++
++	int ret = 0;	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct wifidirect_info *pwdinfo= &(padapter->wdinfo);
++
++	if(*extra == '0' )
++		pwdinfo->wfd_info->wfd_enable = _FALSE;
++	else if(*extra == '1')
++		pwdinfo->wfd_info->wfd_enable = _TRUE;
++
++	DBG_871X( "[%s] wfd_enable = %d\n", __FUNCTION__, pwdinfo->wfd_info->wfd_enable );
++	
++	return ret;
++		
++}
++
++static int rtw_p2p_set_driver_iface(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++//	Commented by Kurt 20121206
++//	This function is used to set driver iface is WEXT or CFG80211
++	int ret = 0;	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct wifidirect_info *pwdinfo= &(padapter->wdinfo);
++
++	if(*extra == '1' )
++	{
++		pwdinfo->driver_interface = DRIVER_WEXT;
++		DBG_871X( "[%s] driver_interface = WEXT\n", __FUNCTION__);
++	}
++	else if(*extra == '2')
++	{
++		pwdinfo->driver_interface = DRIVER_CFG80211;
++		DBG_871X( "[%s] driver_interface = CFG80211\n", __FUNCTION__);
++	}
++	
++	return ret;
++		
++}
++
++//	To set the WFD session available to enable or disable
++static int rtw_p2p_set_sa(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	
++	int ret = 0;	
++	_adapter 					*padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct iw_point 			*pdata = &wrqu->data;
++	struct wifidirect_info		*pwdinfo = &( padapter->wdinfo );
++	struct wifi_display_info		*pwfd_info = pwdinfo->wfd_info;
++	
++	DBG_871X( "[%s] data = %s\n", __FUNCTION__, extra );
++
++	if( 0 )
++	{
++		DBG_871X( "[%s] WiFi Direct is disable!\n", __FUNCTION__ );
++		return ret;
++	}
++	else
++	{
++		if ( extra[ 0 ] == '0' )	//	Disable the session available.
++		{
++			pwdinfo->session_available = _FALSE;
++		}
++		else if ( extra[ 0 ] == '1' )	//	Enable the session available.
++		{
++			pwdinfo->session_available = _TRUE;
++		}
++		else
++		{
++			pwdinfo->session_available = _FALSE;
++		}
++	}
++	printk( "[%s] session available = %d\n", __FUNCTION__, pwdinfo->session_available );
++	
++exit:
++	
++	return ret;
++		
++}
++#endif //CONFIG_WFD
++
++static int rtw_p2p_prov_disc(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{	
++	int ret = 0;	
++	_adapter 				*padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct wifidirect_info	*pwdinfo = &( padapter->wdinfo );
++	u8					peerMAC[ ETH_ALEN ] = { 0x00 };
++	int 					jj,kk;
++	u8   					peerMACStr[ ETH_ALEN * 2 ] = { 0x00 };
++	struct mlme_priv		*pmlmepriv = &padapter->mlmepriv;
++	_list					*plist, *phead;
++	_queue				*queue	= &(pmlmepriv->scanned_queue);
++	struct	wlan_network	*pnetwork = NULL;
++	uint					uintPeerChannel = 0;
++	u8					attr_content[100] = { 0x00 }, _status = 0;
++	u8 *p2pie;
++	uint					p2pielen = 0, attr_contentlen = 0;
++	_irqL				irqL;
++	u8 					ie_offset;
++#ifdef CONFIG_CONCURRENT_MODE
++	_adapter				*pbuddy_adapter = padapter->pbuddy_adapter;
++	struct mlme_ext_priv	*pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
++#endif // CONFIG_CONCURRENT_MODE	
++	
++#ifdef CONFIG_WFD
++	struct wifi_display_info*	pwfd_info = pwdinfo->wfd_info;
++#endif // CONFIG_WFD
++	
++	//	Commented by Albert 20110301
++	//	The input data contains two informations.
++	//	1. First information is the MAC address which wants to issue the provisioning discovery request frame.
++	//	2. Second information is the WPS configuration method which wants to discovery
++	//	Format: 00:E0:4C:00:00:05_display
++	//	Format: 00:E0:4C:00:00:05_keypad
++	//	Format: 00:E0:4C:00:00:05_pbc
++	//	Format: 00:E0:4C:00:00:05_label
++
++	DBG_871X( "[%s] data = %s\n", __FUNCTION__, extra );
++
++	if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++	{
++		DBG_871X( "[%s] WiFi Direct is disable!\n", __FUNCTION__ );
++		return ret;
++	}
++	else
++	{
++#ifdef CONFIG_INTEL_WIDI
++		if(check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE){
++			DBG_871X( "[%s] WiFi is under survey!\n", __FUNCTION__ );
++			return ret;
++		}
++#endif //CONFIG_INTEL_WIDI
++
++		//	Reset the content of struct tx_provdisc_req_info excluded the wps_config_method_request.
++		_rtw_memset( pwdinfo->tx_prov_disc_info.peerDevAddr, 0x00, ETH_ALEN );
++		_rtw_memset( pwdinfo->tx_prov_disc_info.peerIFAddr, 0x00, ETH_ALEN );
++		_rtw_memset( &pwdinfo->tx_prov_disc_info.ssid, 0x00, sizeof( NDIS_802_11_SSID ) );		
++		pwdinfo->tx_prov_disc_info.peer_channel_num[ 0 ] = 0;
++		pwdinfo->tx_prov_disc_info.peer_channel_num[ 1 ] = 0;
++		pwdinfo->tx_prov_disc_info.benable = _FALSE;
++	}
++	
++	for( jj = 0, kk = 0; jj < ETH_ALEN; jj++, kk += 3 )
++	{
++		peerMAC[ jj ] = key_2char2num( extra[kk], extra[kk+ 1] );
++	}
++
++	if ( _rtw_memcmp( &extra[ 18 ], "display", 7 ) )
++	{
++		pwdinfo->tx_prov_disc_info.wps_config_method_request = WPS_CM_DISPLYA;
++	}
++	else if ( _rtw_memcmp( &extra[ 18 ], "keypad", 7 ) )
++	{
++		pwdinfo->tx_prov_disc_info.wps_config_method_request = WPS_CM_KEYPAD;
++	}
++	else if ( _rtw_memcmp( &extra[ 18 ], "pbc", 3 ) )
++	{
++		pwdinfo->tx_prov_disc_info.wps_config_method_request = WPS_CM_PUSH_BUTTON;
++	}
++	else if ( _rtw_memcmp( &extra[ 18 ], "label", 5 ) )
++	{
++		pwdinfo->tx_prov_disc_info.wps_config_method_request = WPS_CM_LABEL;
++	}
++	else
++	{
++		DBG_871X( "[%s] Unknown WPS config methodn", __FUNCTION__ );
++		return( ret );
++	}
++
++
++	_enter_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++
++	phead = get_list_head(queue);
++	plist = get_next(phead);
++       
++	while(1)
++	{
++		if (rtw_end_of_queue_search(phead,plist)== _TRUE)
++			break;
++
++		if( uintPeerChannel != 0 )
++			break;
++
++		pnetwork = LIST_CONTAINOR(plist, struct wlan_network, list);
++
++		//	Commented by Albert 2011/05/18
++		//	Match the device address located in the P2P IE
++		//	This is for the case that the P2P device address is not the same as the P2P interface address.
++
++		if (pnetwork->network.Reserved[0] == 2) { // Probe Request
++			ie_offset = 0;
++		} else { // Beacon or Probe Respones
++			ie_offset = 12;
++		}
++		if ( (p2pie=rtw_get_p2p_ie( &pnetwork->network.IEs[ie_offset], pnetwork->network.IELength - ie_offset, NULL, &p2pielen)) )
++		{
++			while ( p2pie )
++			{
++				//	The P2P Device ID attribute is included in the Beacon frame.
++				//	The P2P Device Info attribute is included in the probe response frame.
++
++				if ( rtw_get_p2p_attr_content( p2pie, p2pielen, P2P_ATTR_DEVICE_ID, attr_content, &attr_contentlen) )
++				{
++					//	Handle the P2P Device ID attribute of Beacon first
++					if ( _rtw_memcmp( attr_content, peerMAC, ETH_ALEN ) )
++					{
++						uintPeerChannel = pnetwork->network.Configuration.DSConfig;
++						break;
++					}
++				}
++				else if ( rtw_get_p2p_attr_content( p2pie, p2pielen, P2P_ATTR_DEVICE_INFO, attr_content, &attr_contentlen) )
++				{
++					//	Handle the P2P Device Info attribute of probe response
++					if ( _rtw_memcmp( attr_content, peerMAC, ETH_ALEN ) )
++					{
++						uintPeerChannel = pnetwork->network.Configuration.DSConfig;
++						break;
++					}					
++				}
++
++				//Get the next P2P IE
++				p2pie = rtw_get_p2p_ie(p2pie+p2pielen, pnetwork->network.IELength - ie_offset -(p2pie -&pnetwork->network.IEs[ie_offset] + p2pielen), NULL, &p2pielen);
++			}
++		}
++
++#ifdef CONFIG_INTEL_WIDI
++			// Some Intel WiDi source may not provide P2P IE, 
++			// so we could only compare mac addr by 802.11 Source Address
++			if( pmlmepriv->widi_state == INTEL_WIDI_STATE_WFD_CONNECTION 
++				&& uintPeerChannel == 0 )
++			{
++				if ( _rtw_memcmp( pnetwork->network.MacAddress, peerMAC, ETH_ALEN ) )
++				{
++					uintPeerChannel = pnetwork->network.Configuration.DSConfig;
++					break;
++				}
++			}
++#endif //CONFIG_INTEL_WIDI
++
++		plist = get_next(plist);
++	
++	}
++
++	_exit_critical_bh(&(pmlmepriv->scanned_queue.lock), &irqL);
++
++	if ( uintPeerChannel )
++	{
++#ifdef CONFIG_WFD
++	{
++		u8	wfd_ie[ 128 ] = { 0x00 };
++		uint	wfd_ielen = 0;
++		
++		if ( rtw_get_wfd_ie( &pnetwork->network.IEs[12], pnetwork->network.IELength - 12,  wfd_ie, &wfd_ielen ) )
++		{
++			u8	wfd_devinfo[ 6 ] = { 0x00 };
++			uint	wfd_devlen = 6;
++
++			DBG_871X( "[%s] Found WFD IE!\n", __FUNCTION__ );
++			if ( rtw_get_wfd_attr_content( wfd_ie, wfd_ielen, WFD_ATTR_DEVICE_INFO, wfd_devinfo, &wfd_devlen ) )
++			{
++				u16	wfd_devinfo_field = 0;
++				
++				//	Commented by Albert 20120319
++				//	The first two bytes are the WFD device information field of WFD device information subelement.
++				//	In big endian format.
++				wfd_devinfo_field = RTW_GET_BE16(wfd_devinfo);
++				if ( wfd_devinfo_field & WFD_DEVINFO_SESSION_AVAIL )
++				{
++					pwfd_info->peer_session_avail = _TRUE;
++				}
++				else
++				{
++					pwfd_info->peer_session_avail = _FALSE;
++				}
++			}
++		}
++		
++		if ( _FALSE == pwfd_info->peer_session_avail )
++		{
++			DBG_871X( "[%s] WFD Session not avaiable!\n", __FUNCTION__ );
++			goto exit;
++		}
++	}	
++#endif // CONFIG_WFD
++
++		DBG_871X( "[%s] peer channel: %d!\n", __FUNCTION__, uintPeerChannel );
++#ifdef CONFIG_CONCURRENT_MODE
++		if ( check_buddy_fwstate(padapter, _FW_LINKED ) )
++		{
++			_cancel_timer_ex( &pwdinfo->ap_p2p_switch_timer );
++		}
++#endif // CONFIG_CONCURRENT_MODE
++		_rtw_memcpy( pwdinfo->tx_prov_disc_info.peerIFAddr, pnetwork->network.MacAddress, ETH_ALEN );
++		_rtw_memcpy( pwdinfo->tx_prov_disc_info.peerDevAddr, peerMAC, ETH_ALEN );
++		pwdinfo->tx_prov_disc_info.peer_channel_num[0] = ( u16 ) uintPeerChannel;
++		pwdinfo->tx_prov_disc_info.benable = _TRUE;
++		rtw_p2p_set_pre_state(pwdinfo, rtw_p2p_state(pwdinfo));
++		rtw_p2p_set_state(pwdinfo, P2P_STATE_TX_PROVISION_DIS_REQ);
++
++		if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_CLIENT))
++		{
++			_rtw_memcpy( &pwdinfo->tx_prov_disc_info.ssid, &pnetwork->network.Ssid, sizeof( NDIS_802_11_SSID ) );
++		}
++		else if(rtw_p2p_chk_role(pwdinfo, P2P_ROLE_DEVICE) || rtw_p2p_chk_role(pwdinfo, P2P_ROLE_GO))
++		{
++			_rtw_memcpy( pwdinfo->tx_prov_disc_info.ssid.Ssid, pwdinfo->p2p_wildcard_ssid, P2P_WILDCARD_SSID_LEN );
++			pwdinfo->tx_prov_disc_info.ssid.SsidLength= P2P_WILDCARD_SSID_LEN;
++		}
++
++#ifdef CONFIG_CONCURRENT_MODE
++		if ( check_buddy_fwstate(padapter, _FW_LINKED ) )
++		{
++			//	Have to enter the power saving with the AP
++			set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode);
++			
++			issue_nulldata(pbuddy_adapter, NULL, 1, 3, 500);
++		}
++		else
++		{
++			set_channel_bwmode(padapter, uintPeerChannel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
++		}
++#else
++		set_channel_bwmode(padapter, uintPeerChannel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
++#endif
++
++		_set_timer( &pwdinfo->pre_tx_scan_timer, P2P_TX_PRESCAN_TIMEOUT );
++		
++#ifdef CONFIG_CONCURRENT_MODE
++		if ( check_buddy_fwstate(padapter, _FW_LINKED ) )
++		{
++			_set_timer( &pwdinfo->restore_p2p_state_timer, P2P_CONCURRENT_PROVISION_TIMEOUT );
++		}
++		else
++		{
++			_set_timer( &pwdinfo->restore_p2p_state_timer, P2P_PROVISION_TIMEOUT );
++		}
++#else
++		_set_timer( &pwdinfo->restore_p2p_state_timer, P2P_PROVISION_TIMEOUT );
++#endif // CONFIG_CONCURRENT_MODE		
++
++		
++	}
++	else
++	{
++		DBG_871X( "[%s] NOT Found in the Scanning Queue!\n", __FUNCTION__ );
++#ifdef CONFIG_INTEL_WIDI
++		rtw_p2p_set_state(pwdinfo, P2P_STATE_FIND_PHASE_SEARCH);
++		rtw_p2p_findphase_ex_set(pwdinfo, P2P_FINDPHASE_EX_NONE);
++		rtw_free_network_queue(padapter, _TRUE);		
++		_enter_critical_bh(&pmlmepriv->lock, &irqL);				
++		rtw_sitesurvey_cmd(padapter, NULL, 0, NULL, 0);
++		_exit_critical_bh(&pmlmepriv->lock, &irqL);
++#endif //CONFIG_INTEL_WIDI
++	}
++exit:
++	
++	return ret;
++		
++}
++
++//	Added by Albert 20110328
++//	This function is used to inform the driver the user had specified the pin code value or pbc
++//	to application.
++
++static int rtw_p2p_got_wpsinfo(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	
++	int ret = 0;	
++	_adapter 				*padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct wifidirect_info	*pwdinfo = &( padapter->wdinfo );
++	
++
++	DBG_871X( "[%s] data = %s\n", __FUNCTION__, extra );
++	//	Added by Albert 20110328
++	//	if the input data is P2P_NO_WPSINFO -> reset the wpsinfo
++	//	if the input data is P2P_GOT_WPSINFO_PEER_DISPLAY_PIN -> the utility just input the PIN code got from the peer P2P device.
++	//	if the input data is P2P_GOT_WPSINFO_SELF_DISPLAY_PIN -> the utility just got the PIN code from itself.
++	//	if the input data is P2P_GOT_WPSINFO_PBC -> the utility just determine to use the PBC
++	
++	if ( *extra == '0' )
++	{
++		pwdinfo->ui_got_wps_info = P2P_NO_WPSINFO;
++	}
++	else if ( *extra == '1' )
++	{
++		pwdinfo->ui_got_wps_info = P2P_GOT_WPSINFO_PEER_DISPLAY_PIN;
++	}
++	else if ( *extra == '2' )
++	{
++		pwdinfo->ui_got_wps_info = P2P_GOT_WPSINFO_SELF_DISPLAY_PIN;
++	}
++	else if ( *extra == '3' )
++	{
++		pwdinfo->ui_got_wps_info = P2P_GOT_WPSINFO_PBC;
++	}
++	else
++	{
++		pwdinfo->ui_got_wps_info = P2P_NO_WPSINFO;
++	}
++	
++	return ret;
++		
++}
++
++#endif //CONFIG_P2P
++
++static int rtw_p2p_set(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	
++	int ret = 0;
++#ifdef CONFIG_P2P
++
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);	
++	struct iw_point *pdata = &wrqu->data;
++	struct wifidirect_info *pwdinfo= &(padapter->wdinfo);
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++
++	DBG_871X( "[%s] extra = %s\n", __FUNCTION__, extra );
++
++	if ( _rtw_memcmp( extra, "enable=", 7 ) )
++	{
++		rtw_wext_p2p_enable( dev, info, wrqu, &extra[7] );
++	}
++	else if ( _rtw_memcmp( extra, "setDN=", 6 ) )
++	{
++		wrqu->data.length -= 6;
++		rtw_p2p_setDN( dev, info, wrqu, &extra[6] );
++	}
++	else if ( _rtw_memcmp( extra, "profilefound=", 13 ) )
++	{
++		wrqu->data.length -= 13;
++		rtw_p2p_profilefound( dev, info, wrqu, &extra[13] );
++	}
++	else if ( _rtw_memcmp( extra, "prov_disc=", 10 ) )
++	{
++		wrqu->data.length -= 10;
++		rtw_p2p_prov_disc( dev, info, wrqu, &extra[10] );
++	}
++	else if ( _rtw_memcmp( extra, "nego=", 5 ) )
++	{
++		wrqu->data.length -= 5;
++		rtw_p2p_connect( dev, info, wrqu, &extra[5] );
++	}
++	else if ( _rtw_memcmp( extra, "intent=", 7 ) )
++	{
++		//	Commented by Albert 2011/03/23
++		//	The wrqu->data.length will include the null character
++		//	So, we will decrease 7 + 1
++		wrqu->data.length -= 8;
++		rtw_p2p_set_intent( dev, info, wrqu, &extra[7] );
++	}
++	else if ( _rtw_memcmp( extra, "ssid=", 5 ) )
++	{
++		wrqu->data.length -= 5;
++		rtw_p2p_set_go_nego_ssid( dev, info, wrqu, &extra[5] );
++	}
++	else if ( _rtw_memcmp( extra, "got_wpsinfo=", 12 ) )
++	{
++		wrqu->data.length -= 12;
++		rtw_p2p_got_wpsinfo( dev, info, wrqu, &extra[12] );
++	}
++	else if ( _rtw_memcmp( extra, "listen_ch=", 10 ) )
++	{
++		//	Commented by Albert 2011/05/24
++		//	The wrqu->data.length will include the null character
++		//	So, we will decrease (10 + 1)	
++		wrqu->data.length -= 11;
++		rtw_p2p_set_listen_ch( dev, info, wrqu, &extra[10] );
++	}
++	else if ( _rtw_memcmp( extra, "op_ch=", 6 ) )
++	{
++		//	Commented by Albert 2011/05/24
++		//	The wrqu->data.length will include the null character
++		//	So, we will decrease (6 + 1)	
++		wrqu->data.length -= 7;
++		rtw_p2p_set_op_ch( dev, info, wrqu, &extra[6] );
++	}
++	else if ( _rtw_memcmp( extra, "invite=", 7 ) )
++	{
++		wrqu->data.length -= 8;
++		rtw_p2p_invite_req( dev, info, wrqu, &extra[7] );
++	}
++	else if ( _rtw_memcmp( extra, "persistent=", 11 ) )
++	{
++		wrqu->data.length -= 11;
++		rtw_p2p_set_persistent( dev, info, wrqu, &extra[11] );
++	}
++	else if ( _rtw_memcmp ( extra, "uuid=", 5) )
++	{
++		wrqu->data.length -= 5;
++		ret = rtw_p2p_set_wps_uuid( dev, info, wrqu, &extra[5] );
++	}
++#ifdef CONFIG_WFD
++	else if ( _rtw_memcmp( extra, "sa=", 3 ) )
++	{
++		//	sa: WFD Session Available information
++		wrqu->data.length -= 3;
++		rtw_p2p_set_sa( dev, info, wrqu, &extra[3] );
++	}
++	else if ( _rtw_memcmp( extra, "pc=", 3 ) )
++	{
++		//	pc: WFD Preferred Connection
++		wrqu->data.length -= 3;
++		rtw_p2p_set_pc( dev, info, wrqu, &extra[3] );
++	}
++	else if ( _rtw_memcmp( extra, "wfd_type=", 9 ) )
++	{
++		//	Specify this device is Mircast source or sink
++		wrqu->data.length -= 9;
++		rtw_p2p_set_wfd_device_type( dev, info, wrqu, &extra[9] );
++	}
++	else if ( _rtw_memcmp( extra, "scan_type=", 10 ) )
++	{
++		wrqu->data.length -= 10;
++		rtw_p2p_set_scan_result_type( dev, info, wrqu, &extra[10] );
++	}
++	else if ( _rtw_memcmp( extra, "wfd_enable=", 11 ) )
++	{
++		wrqu->data.length -= 11;
++		rtw_p2p_set_wfd_enable( dev, info, wrqu, &extra[11] );
++	}
++	else if ( _rtw_memcmp( extra, "driver_iface=", 13 ) )
++	{
++		wrqu->data.length -= 13;
++		rtw_p2p_set_driver_iface( dev, info, wrqu, &extra[13] );
++	}
++#endif //CONFIG_WFD
++#endif //CONFIG_P2P
++
++	return ret;
++		
++}
++
++static int rtw_p2p_get(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	
++	int ret = 0;	
++	
++#ifdef CONFIG_P2P
++
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);	
++	struct iw_point *pdata = &wrqu->data;
++	struct wifidirect_info *pwdinfo= &(padapter->wdinfo);
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++
++	if ( padapter->bShowGetP2PState )
++	{
++		DBG_871X( "[%s] extra = %s\n", __FUNCTION__, (char*) wrqu->data.pointer );
++	}
++	
++	if ( _rtw_memcmp( wrqu->data.pointer, "status", 6 ) )
++	{
++		rtw_p2p_get_status( dev, info, wrqu, extra );
++	}
++	else if ( _rtw_memcmp( wrqu->data.pointer, "role", 4 ) )
++	{
++		rtw_p2p_get_role( dev, info, wrqu, extra);
++	}
++	else if ( _rtw_memcmp( wrqu->data.pointer, "peer_ifa", 8 ) )
++	{
++		rtw_p2p_get_peer_ifaddr( dev, info, wrqu, extra);
++	}
++	else if ( _rtw_memcmp( wrqu->data.pointer, "req_cm", 6 ) )
++	{
++		rtw_p2p_get_req_cm( dev, info, wrqu, extra);
++	}
++	else if ( _rtw_memcmp( wrqu->data.pointer, "peer_deva", 9 ) )
++	{
++		//	Get the P2P device address when receiving the provision discovery request frame.
++		rtw_p2p_get_peer_devaddr( dev, info, wrqu, extra);
++	}
++	else if ( _rtw_memcmp( wrqu->data.pointer, "group_id", 8 ) )
++	{
++		rtw_p2p_get_groupid( dev, info, wrqu, extra);
++	}
++	else if ( _rtw_memcmp( wrqu->data.pointer, "inv_peer_deva", 13 ) )
++	{
++		//	Get the P2P device address when receiving the P2P Invitation request frame.
++		rtw_p2p_get_peer_devaddr_by_invitation( dev, info, wrqu, extra);
++	}
++	else if ( _rtw_memcmp( wrqu->data.pointer, "op_ch", 5 ) )
++	{
++		rtw_p2p_get_op_ch( dev, info, wrqu, extra);
++	}
++#ifdef CONFIG_WFD
++	else if ( _rtw_memcmp( wrqu->data.pointer, "peer_port", 9 ) )
++	{
++		rtw_p2p_get_peer_wfd_port( dev, info, wrqu, extra );
++	}
++	else if ( _rtw_memcmp( wrqu->data.pointer, "wfd_sa", 6 ) )
++	{
++		rtw_p2p_get_peer_wfd_session_available( dev, info, wrqu, extra );
++	}
++	else if ( _rtw_memcmp( wrqu->data.pointer, "wfd_pc", 6 ) )
++	{
++		rtw_p2p_get_peer_wfd_preferred_connection( dev, info, wrqu, extra );
++	}
++#endif // CONFIG_WFD	
++	
++#endif //CONFIG_P2P
++
++	return ret;
++		
++}
++
++static int rtw_p2p_get2(struct net_device *dev,
++						struct iw_request_info *info,
++						union iwreq_data *wrqu, char *extra)
++{
++
++	int ret = 0;
++
++#ifdef CONFIG_P2P
++
++	int length = wrqu->data.length;
++	char *buffer = (u8 *)rtw_malloc(length);
++
++	if (buffer == NULL)
++	{
++		ret = -ENOMEM;
++		goto bad;
++	}
++
++	if (copy_from_user(buffer, wrqu->data.pointer, wrqu->data.length))
++	{
++		ret - EFAULT;
++		goto bad;
++	}
++
++	DBG_871X("[%s] buffer = %s\n", __FUNCTION__, buffer);
++
++	if (_rtw_memcmp(buffer, "wpsCM=", 6))
++	{
++		ret = rtw_p2p_get_wps_configmethod(dev, info, wrqu, extra, &buffer[6]);
++	} else if (_rtw_memcmp(buffer, "devN=", 5))
++	{
++		ret = rtw_p2p_get_device_name(dev, info, wrqu, extra, &buffer[5]);
++	} else if (_rtw_memcmp(buffer, "dev_type=", 9))
++	{
++		ret = rtw_p2p_get_device_type(dev, info, wrqu, extra, &buffer[9]);
++	} else if (_rtw_memcmp(buffer, "go_devadd=", 10))
++	{
++		ret = rtw_p2p_get_go_device_address(dev, info, wrqu, extra, &buffer[10]);
++	} else if (_rtw_memcmp(buffer, "InvProc=", 8))
++	{
++		ret = rtw_p2p_get_invitation_procedure(dev, info, wrqu, extra, &buffer[8]);
++	} else
++	{
++		snprintf(extra, sizeof("Command not found."), "Command not found.");
++		wrqu->data.length = strlen(extra);
++	}
++
++bad:
++	if (buffer)
++	{
++		rtw_mfree(buffer, length);
++	}
++
++#endif //CONFIG_P2P
++
++	return ret;
++
++}
++
++extern int rtw_change_ifname(_adapter *padapter, const char *ifname);
++static int rtw_rereg_nd_name(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	int ret = 0;	
++	_adapter *padapter = rtw_netdev_priv(dev);
++	struct rereg_nd_name_data *rereg_priv = &padapter->rereg_nd_name_priv;
++	char new_ifname[IFNAMSIZ];
++
++	if(rereg_priv->old_ifname[0] == 0) {
++		char *reg_ifname;
++#ifdef CONFIG_CONCURRENT_MODE 
++		if (padapter->isprimary)
++			reg_ifname = padapter->registrypriv.ifname;
++		else
++#endif
++		reg_ifname = padapter->registrypriv.if2name;
++
++		strncpy(rereg_priv->old_ifname, reg_ifname, IFNAMSIZ);
++		rereg_priv->old_ifname[IFNAMSIZ-1] = 0;
++	}
++
++	//DBG_871X("%s wrqu->data.length:%d\n", __FUNCTION__, wrqu->data.length);
++	if(wrqu->data.length > IFNAMSIZ)
++		return -EFAULT;
++
++	if ( copy_from_user(new_ifname, wrqu->data.pointer, IFNAMSIZ) ) {
++		return -EFAULT;
++	}
++
++	if( 0 == strcmp(rereg_priv->old_ifname, new_ifname) ) {
++		return ret;
++	}
++
++	DBG_871X("%s new_ifname:%s\n", __FUNCTION__, new_ifname);
++	if( 0 != (ret = rtw_change_ifname(padapter, new_ifname)) ) {
++		goto exit;
++	}
++
++	if(_rtw_memcmp(rereg_priv->old_ifname, "disable%d", 9) == _TRUE) {
++		padapter->ledpriv.bRegUseLed= rereg_priv->old_bRegUseLed;
++		rtw_hal_sw_led_init(padapter);
++		rtw_ips_mode_req(&padapter->pwrctrlpriv, rereg_priv->old_ips_mode);
++	}
++
++	strncpy(rereg_priv->old_ifname, new_ifname, IFNAMSIZ);
++	rereg_priv->old_ifname[IFNAMSIZ-1] = 0;
++	
++	if(_rtw_memcmp(new_ifname, "disable%d", 9) == _TRUE) {
++
++		DBG_871X("%s disable\n", __FUNCTION__);
++		// free network queue for Android's timming issue
++		rtw_free_network_queue(padapter, _TRUE);
++		
++		// close led
++		rtw_led_control(padapter, LED_CTL_POWER_OFF);
++		rereg_priv->old_bRegUseLed = padapter->ledpriv.bRegUseLed;
++		padapter->ledpriv.bRegUseLed= _FALSE;
++		rtw_hal_sw_led_deinit(padapter);
++		
++		// the interface is being "disabled", we can do deeper IPS
++		rereg_priv->old_ips_mode = rtw_get_ips_mode_req(&padapter->pwrctrlpriv);
++		rtw_ips_mode_req(&padapter->pwrctrlpriv, IPS_NORMAL);
++	}
++exit:
++	return ret;
++
++}
++
++#if 0
++void mac_reg_dump(_adapter *padapter)
++{
++	int i,j=1;		
++	DBG_871X("\n======= MAC REG =======\n");
++	for(i=0x0;i<0x300;i+=4)
++	{	
++		if(j%4==1)	DBG_871X("0x%02x",i);
++		DBG_871X(" 0x%08x ",rtw_read32(padapter,i));		
++		if((j++)%4 == 0)	DBG_871X("\n");	
++	}
++	for(i=0x400;i<0x800;i+=4)
++	{	
++		if(j%4==1)	DBG_871X("0x%02x",i);
++		DBG_871X(" 0x%08x ",rtw_read32(padapter,i));		
++		if((j++)%4 == 0)	DBG_871X("\n");	
++	}									
++}
++void bb_reg_dump(_adapter *padapter)
++{
++	int i,j=1;		
++	DBG_871X("\n======= BB REG =======\n");
++	for(i=0x800;i<0x1000;i+=4)
++	{
++		if(j%4==1) DBG_871X("0x%02x",i);
++				
++		DBG_871X(" 0x%08x ",rtw_read32(padapter,i));		
++		if((j++)%4 == 0)	DBG_871X("\n");	
++	}		
++}
++void rf_reg_dump(_adapter *padapter)
++{	
++	int i,j=1,path;
++	u32 value;			
++	DBG_871X("\n======= RF REG =======\n");
++	for(path=0;path<2;path++)
++	{
++		DBG_871X("\nRF_Path(%x)\n",path);
++		for(i=0;i<0x100;i++)
++		{								
++			value = PHY_QueryRFReg(padapter, (RF90_RADIO_PATH_E)path,i, bMaskDWord);
++			if(j%4==1)	DBG_871X("0x%02x ",i);
++			DBG_871X(" 0x%08x ",value);
++			if((j++)%4==0)	DBG_871X("\n");	
++		}	
++	}
++}
++
++#endif
++
++void mac_reg_dump(_adapter *padapter)
++{
++	int i,j=1;		
++	DBG_871X("\n======= MAC REG =======\n");
++	for(i=0x0;i<0x300;i+=4)
++	{	
++		if(j%4==1)	DBG_871X("0x%02x",i);
++		DBG_871X(" 0x%08x ",rtw_read32(padapter,i));		
++		if((j++)%4 == 0)	DBG_871X("\n");	
++	}
++	for(i=0x400;i<0x800;i+=4)
++	{	
++		if(j%4==1)	DBG_871X("0x%02x",i);
++		DBG_871X(" 0x%08x ",rtw_read32(padapter,i));		
++		if((j++)%4 == 0)	DBG_871X("\n");	
++	}									
++}
++void bb_reg_dump(_adapter *padapter)
++{
++	int i,j=1;		
++	DBG_871X("\n======= BB REG =======\n");
++	for(i=0x800;i<0x1000;i+=4)
++	{
++		if(j%4==1) DBG_871X("0x%02x",i);
++				
++		DBG_871X(" 0x%08x ",rtw_read32(padapter,i));		
++		if((j++)%4 == 0)	DBG_871X("\n");	
++	}		
++}
++void rf_reg_dump(_adapter *padapter)
++{	
++	int i,j=1,path;
++	u32 value;	
++	u8 rf_type,path_nums = 0;
++	rtw_hal_get_hwreg(padapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type));
++		
++	DBG_871X("\n======= RF REG =======\n");
++	if((RF_1T2R == rf_type) ||(RF_1T1R ==rf_type ))	
++		path_nums = 1;
++	else	
++		path_nums = 2;
++		
++	for(path=0;path<path_nums;path++)
++	{
++		DBG_871X("\nRF_Path(%x)\n",path);
++		for(i=0;i<0x100;i++)
++		{								
++			//value = PHY_QueryRFReg(padapter, (RF90_RADIO_PATH_E)path,i, bMaskDWord);
++			value =rtw_hal_read_rfreg(padapter, path, i, 0xffffffff);
++			if(j%4==1)	DBG_871X("0x%02x ",i);
++			DBG_871X(" 0x%08x ",value);
++			if((j++)%4==0)	DBG_871X("\n");	
++		}	
++	}
++}
++
++#ifdef CONFIG_IOL
++#include <rtw_iol.h>
++#endif
++#ifdef DBG_CONFIG_ERROR_DETECT
++#include <rtw_sreset.h>
++#endif
++static int rtw_dbg_port(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{	
++	_irqL irqL;
++	int ret = 0;
++	u8 major_cmd, minor_cmd;
++	u16 arg;
++	u32 extra_arg, *pdata, val32;
++	struct sta_info *psta;						
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct security_priv *psecuritypriv = &padapter->securitypriv;
++	struct wlan_network *cur_network = &(pmlmepriv->cur_network);
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	
++
++	pdata = (u32*)&wrqu->data;	
++
++	val32 = *pdata;
++	arg = (u16)(val32&0x0000ffff);
++	major_cmd = (u8)(val32>>24);
++	minor_cmd = (u8)((val32>>16)&0x00ff);
++
++	extra_arg = *(pdata+1);
++	
++	switch(major_cmd)
++	{
++		case 0x70://read_reg
++			switch(minor_cmd)
++			{
++				case 1:
++					DBG_871X("rtw_read8(0x%x)=0x%02x\n", arg, rtw_read8(padapter, arg));
++					break;
++				case 2:
++					DBG_871X("rtw_read16(0x%x)=0x%04x\n", arg, rtw_read16(padapter, arg));
++					break;
++				case 4:
++					DBG_871X("rtw_read32(0x%x)=0x%08x\n", arg, rtw_read32(padapter, arg));
++					break;
++			}			
++			break;
++		case 0x71://write_reg
++			switch(minor_cmd)
++			{
++				case 1:
++					rtw_write8(padapter, arg, extra_arg);
++					DBG_871X("rtw_write8(0x%x)=0x%02x\n", arg, rtw_read8(padapter, arg));
++					break;
++				case 2:
++					rtw_write16(padapter, arg, extra_arg);
++					DBG_871X("rtw_write16(0x%x)=0x%04x\n", arg, rtw_read16(padapter, arg));
++					break;
++				case 4:
++					rtw_write32(padapter, arg, extra_arg);
++					DBG_871X("rtw_write32(0x%x)=0x%08x\n", arg, rtw_read32(padapter, arg));
++					break;
++			}			
++			break;
++		case 0x72://read_bb
++			DBG_871X("read_bbreg(0x%x)=0x%x\n", arg, rtw_hal_read_bbreg(padapter, arg, 0xffffffff));
++			break;
++		case 0x73://write_bb
++			rtw_hal_write_bbreg(padapter, arg, 0xffffffff, extra_arg);
++			DBG_871X("write_bbreg(0x%x)=0x%x\n", arg, rtw_hal_read_bbreg(padapter, arg, 0xffffffff));
++			break;
++		case 0x74://read_rf
++			DBG_871X("read RF_reg path(0x%02x),offset(0x%x),value(0x%08x)\n",minor_cmd,arg,rtw_hal_read_rfreg(padapter, minor_cmd, arg, 0xffffffff));	
++			break;
++		case 0x75://write_rf
++			rtw_hal_write_rfreg(padapter, minor_cmd, arg, 0xffffffff, extra_arg);
++			DBG_871X("write RF_reg path(0x%02x),offset(0x%x),value(0x%08x)\n",minor_cmd,arg, rtw_hal_read_rfreg(padapter, minor_cmd, arg, 0xffffffff));
++			break;	
++
++		case 0x76:
++			switch(minor_cmd)
++			{
++				case 0x00: //normal mode, 
++					padapter->recvpriv.is_signal_dbg = 0;
++					break;
++				case 0x01: //dbg mode
++					padapter->recvpriv.is_signal_dbg = 1;
++					extra_arg = extra_arg>100?100:extra_arg;
++					extra_arg = extra_arg<0?0:extra_arg;
++					padapter->recvpriv.signal_strength_dbg=extra_arg;
++					break;
++			}
++			break;
++		case 0x78: //IOL test
++			switch(minor_cmd)
++			{
++				#ifdef CONFIG_IOL
++				case 0x04: //LLT table initialization test
++				{
++					u8 page_boundary = 0xf9;
++					{
++						struct xmit_frame	*xmit_frame;
++
++						if((xmit_frame=rtw_IOL_accquire_xmit_frame(padapter)) == NULL) {
++							ret = -ENOMEM;	
++							break;
++						}
++						
++						rtw_IOL_append_LLT_cmd(xmit_frame, page_boundary);
++
++
++						if(_SUCCESS != rtw_IOL_exec_cmds_sync(padapter, xmit_frame, 500) )
++							ret = -EPERM;
++					}
++				}
++					break;
++				case 0x05: //blink LED test
++				{
++					u16 reg = 0x4c;
++					u32 blink_num = 50;
++					u32 blink_delay_ms = 200;
++					int i;
++					
++					{
++						struct xmit_frame	*xmit_frame;
++
++						if((xmit_frame=rtw_IOL_accquire_xmit_frame(padapter)) == NULL) {
++							ret = -ENOMEM;	
++							break;
++						}
++
++						for(i=0;i<blink_num;i++){
++							rtw_IOL_append_WB_cmd(xmit_frame, reg, 0x00);
++							rtw_IOL_append_DELAY_MS_cmd(xmit_frame, blink_delay_ms);
++							rtw_IOL_append_WB_cmd(xmit_frame, reg, 0x08);
++							rtw_IOL_append_DELAY_MS_cmd(xmit_frame, blink_delay_ms);
++						}
++						if(_SUCCESS != rtw_IOL_exec_cmds_sync(padapter, xmit_frame, (blink_delay_ms*blink_num*2)+200) )
++							ret = -EPERM;
++					}
++				}
++					break;
++					
++				case 0x06: //continuous wirte byte test
++				{
++					u16 reg = arg;
++					u16 start_value = 0;
++					u32 write_num = extra_arg;
++					int i;
++					u8 final;
++					
++					{
++						struct xmit_frame	*xmit_frame;
++
++						if((xmit_frame=rtw_IOL_accquire_xmit_frame(padapter)) == NULL) {
++							ret = -ENOMEM;	
++							break;
++						}
++
++						for(i=0;i<write_num;i++){
++							rtw_IOL_append_WB_cmd(xmit_frame, reg, i+start_value);
++						}
++						if(_SUCCESS != rtw_IOL_exec_cmds_sync(padapter, xmit_frame, 5000))
++							ret = -EPERM;
++					}
++
++					if(start_value+write_num-1 == (final=rtw_read8(padapter, reg)) ) {
++						DBG_871X("continuous IOL_CMD_WB_REG to 0x%x %u times Success, start:%u, final:%u\n", reg, write_num, start_value, final);
++					} else {
++						DBG_871X("continuous IOL_CMD_WB_REG to 0x%x %u times Fail, start:%u, final:%u\n", reg, write_num, start_value, final);
++					}
++				}
++					break;
++					
++				case 0x07: //continuous wirte word test
++				{
++					u16 reg = arg;
++					u16 start_value = 200;
++					u32 write_num = extra_arg;
++				
++					int i;
++					u16 final;
++
++					{
++						struct xmit_frame	*xmit_frame;
++
++						if((xmit_frame=rtw_IOL_accquire_xmit_frame(padapter)) == NULL) {
++							ret = -ENOMEM;	
++							break;
++						}
++
++						for(i=0;i<write_num;i++){
++							rtw_IOL_append_WW_cmd(xmit_frame, reg, i+start_value);
++						}
++						if(_SUCCESS !=rtw_IOL_exec_cmds_sync(padapter, xmit_frame, 5000))
++							ret = -EPERM;
++					}
++
++					if(start_value+write_num-1 == (final=rtw_read16(padapter, reg)) ) {
++						DBG_871X("continuous IOL_CMD_WW_REG to 0x%x %u times Success, start:%u, final:%u\n", reg, write_num, start_value, final);
++					} else {
++						DBG_871X("continuous IOL_CMD_WW_REG to 0x%x %u times Fail, start:%u, final:%u\n", reg, write_num, start_value, final);
++					}
++				}
++					break;
++					
++				case 0x08: //continuous wirte dword test
++				{
++					u16 reg = arg;
++					u32 start_value = 0x110000c7;
++					u32 write_num = extra_arg;
++				
++					int i;
++					u32 final;
++
++					{
++						struct xmit_frame	*xmit_frame;
++
++						if((xmit_frame=rtw_IOL_accquire_xmit_frame(padapter)) == NULL) {
++							ret = -ENOMEM;	
++							break;
++						}
++
++						for(i=0;i<write_num;i++){
++							rtw_IOL_append_WD_cmd(xmit_frame, reg, i+start_value);
++						}
++						if(_SUCCESS !=rtw_IOL_exec_cmds_sync(padapter, xmit_frame, 5000))
++							ret = -EPERM;
++							
++					}
++
++					if(start_value+write_num-1 == (final=rtw_read32(padapter, reg)) ) {
++						DBG_871X("continuous IOL_CMD_WD_REG to 0x%x %u times Success, start:%u, final:%u\n", reg, write_num, start_value, final);
++					} else {
++						DBG_871X("continuous IOL_CMD_WD_REG to 0x%x %u times Fail, start:%u, final:%u\n", reg, write_num, start_value, final);
++					}
++				}
++					break;
++				#endif //CONFIG_IOL
++			}
++			break;
++		case 0x7a:
++			receive_disconnect(padapter, pmlmeinfo->network.MacAddress
++				, WLAN_REASON_EXPIRATION_CHK);
++			break;
++
++		case 0x7F:
++			switch(minor_cmd)
++			{
++				case 0x0:
++					DBG_871X("fwstate=0x%x\n", get_fwstate(pmlmepriv));
++					break;
++				case 0x01:
++					DBG_871X("auth_alg=0x%x, enc_alg=0x%x, auth_type=0x%x, enc_type=0x%x\n", 
++						psecuritypriv->dot11AuthAlgrthm, psecuritypriv->dot11PrivacyAlgrthm,
++						psecuritypriv->ndisauthtype, psecuritypriv->ndisencryptstatus);
++					break;
++				case 0x02:
++					DBG_871X("pmlmeinfo->state=0x%x\n", pmlmeinfo->state);
++					break;
++				case 0x03:
++					DBG_871X("qos_option=%d\n", pmlmepriv->qospriv.qos_option);
++					DBG_871X("ht_option=%d\n", pmlmepriv->htpriv.ht_option);
++					break;
++				case 0x04:
++					DBG_871X("cur_ch=%d\n", pmlmeext->cur_channel);
++					DBG_871X("cur_bw=%d\n", pmlmeext->cur_bwmode);
++					DBG_871X("cur_ch_off=%d\n", pmlmeext->cur_ch_offset);
++					break;
++				case 0x05:
++					psta = rtw_get_stainfo(pstapriv, cur_network->network.MacAddress);
++					if(psta)
++					{
++						int i;
++						struct recv_reorder_ctrl *preorder_ctrl;
++					
++						DBG_871X("SSID=%s\n", cur_network->network.Ssid.Ssid);
++						DBG_871X("sta's macaddr:" MAC_FMT "\n", MAC_ARG(psta->hwaddr));
++						DBG_871X("cur_channel=%d, cur_bwmode=%d, cur_ch_offset=%d\n", pmlmeext->cur_channel, pmlmeext->cur_bwmode, pmlmeext->cur_ch_offset);
++						DBG_871X("rtsen=%d, cts2slef=%d\n", psta->rtsen, psta->cts2self);
++						DBG_871X("qos_en=%d, ht_en=%d, init_rate=%d\n", psta->qos_option, psta->htpriv.ht_option, psta->init_rate);	
++						DBG_871X("state=0x%x, aid=%d, macid=%d, raid=%d\n", psta->state, psta->aid, psta->mac_id, psta->raid);	
++						DBG_871X("bwmode=%d, ch_offset=%d, sgi=%d\n", psta->htpriv.bwmode, psta->htpriv.ch_offset, psta->htpriv.sgi);						
++						DBG_871X("ampdu_enable = %d\n", psta->htpriv.ampdu_enable);	
++						DBG_871X("agg_enable_bitmap=%x, candidate_tid_bitmap=%x\n", psta->htpriv.agg_enable_bitmap, psta->htpriv.candidate_tid_bitmap);
++						
++						for(i=0;i<16;i++)
++						{							
++							preorder_ctrl = &psta->recvreorder_ctrl[i];
++							if(preorder_ctrl->enable)
++							{
++								DBG_871X("tid=%d, indicate_seq=%d\n", i, preorder_ctrl->indicate_seq);
++							}
++						}	
++							
++					}
++					else
++					{							
++						DBG_871X("can't get sta's macaddr, cur_network's macaddr:" MAC_FMT "\n", MAC_ARG(cur_network->network.MacAddress));
++					}					
++					break;
++				case 0x06:
++					{
++						u8	DMFlag;
++						rtw_hal_get_hwreg(padapter, HW_VAR_DM_FLAG, (u8 *)(&DMFlag));
++						DBG_871X("(B)DMFlag=0x%x, arg=0x%x\n", DMFlag, arg);
++						DMFlag = (u8)(0x0f&arg);
++						DBG_871X("(A)DMFlag=0x%x\n", DMFlag);
++						rtw_hal_set_hwreg(padapter, HW_VAR_DM_FLAG, (u8 *)(&DMFlag));
++					}
++					break;
++				case 0x07:
++					DBG_871X("bSurpriseRemoved=%d, bDriverStopped=%d\n", 
++						padapter->bSurpriseRemoved, padapter->bDriverStopped);
++					break;
++                                case 0x08:
++					{
++						struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
++						struct recv_priv  *precvpriv = &padapter->recvpriv;
++						
++						DBG_871X("free_xmitbuf_cnt=%d, free_xmitframe_cnt=%d"
++							", free_xmit_extbuf_cnt=%d, free_xframe_ext_cnt=%d"
++							", free_recvframe_cnt=%d\n",
++							pxmitpriv->free_xmitbuf_cnt, pxmitpriv->free_xmitframe_cnt,
++							pxmitpriv->free_xmit_extbuf_cnt, pxmitpriv->free_xframe_ext_cnt,
++							precvpriv->free_recvframe_cnt);
++						#ifdef CONFIG_USB_HCI
++						DBG_871X("rx_urb_pending_cn=%d\n", precvpriv->rx_pending_cnt);
++						#endif
++					}
++					break;	
++				case 0x09:
++					{
++						int i, j;
++						_list	*plist, *phead;
++						struct recv_reorder_ctrl *preorder_ctrl;
++						
++#ifdef CONFIG_AP_MODE
++						DBG_871X("sta_dz_bitmap=0x%x, tim_bitmap=0x%x\n", pstapriv->sta_dz_bitmap, pstapriv->tim_bitmap);
++#endif						
++						_enter_critical_bh(&pstapriv->sta_hash_lock, &irqL);
++
++						for(i=0; i< NUM_STA; i++)
++						{
++							phead = &(pstapriv->sta_hash[i]);
++							plist = get_next(phead);
++		
++							while ((rtw_end_of_queue_search(phead, plist)) == _FALSE)
++							{
++								psta = LIST_CONTAINOR(plist, struct sta_info, hash_list);
++
++								plist = get_next(plist);
++
++								if(extra_arg == psta->aid)
++								{
++									DBG_871X("sta's macaddr:" MAC_FMT "\n", MAC_ARG(psta->hwaddr));
++									DBG_871X("rtsen=%d, cts2slef=%d\n", psta->rtsen, psta->cts2self);
++									DBG_871X("qos_en=%d, ht_en=%d, init_rate=%d\n", psta->qos_option, psta->htpriv.ht_option, psta->init_rate);	
++									DBG_871X("state=0x%x, aid=%d, macid=%d, raid=%d\n", psta->state, psta->aid, psta->mac_id, psta->raid);	
++									DBG_871X("bwmode=%d, ch_offset=%d, sgi=%d\n", psta->htpriv.bwmode, psta->htpriv.ch_offset, psta->htpriv.sgi);						
++									DBG_871X("ampdu_enable = %d\n", psta->htpriv.ampdu_enable);									
++									DBG_871X("agg_enable_bitmap=%x, candidate_tid_bitmap=%x\n", psta->htpriv.agg_enable_bitmap, psta->htpriv.candidate_tid_bitmap);
++#ifdef CONFIG_AP_MODE
++									DBG_871X("capability=0x%x\n", psta->capability);
++									DBG_871X("flags=0x%x\n", psta->flags);
++									DBG_871X("wpa_psk=0x%x\n", psta->wpa_psk);
++									DBG_871X("wpa2_group_cipher=0x%x\n", psta->wpa2_group_cipher);
++									DBG_871X("wpa2_pairwise_cipher=0x%x\n", psta->wpa2_pairwise_cipher);
++									DBG_871X("qos_info=0x%x\n", psta->qos_info);
++#endif
++									DBG_871X("dot118021XPrivacy=0x%x\n", psta->dot118021XPrivacy);
++									
++									
++						
++									for(j=0;j<16;j++)
++									{							
++										preorder_ctrl = &psta->recvreorder_ctrl[j];
++										if(preorder_ctrl->enable)
++										{
++											DBG_871X("tid=%d, indicate_seq=%d\n", j, preorder_ctrl->indicate_seq);
++										}
++									}		
++									
++								}							
++			
++							}
++						}
++	
++						_exit_critical_bh(&pstapriv->sta_hash_lock, &irqL);
++
++					}
++					break;
++
++                                case 0x0c://dump rx packet
++					{
++						DBG_871X("dump rx packet (%d)\n",extra_arg);						
++						//pHalData->bDumpRxPkt =extra_arg;						
++						rtw_hal_set_def_var(padapter, HAL_DEF_DBG_DUMP_RXPKT, &(extra_arg));
++					}
++					break;
++#if 0				
++					case 0x0d://dump cam
++					{
++						//u8 entry = (u8) extra_arg;
++						u8 entry=0;
++						//dump cam
++						for(entry=0;entry<32;entry++)
++							read_cam(padapter,entry);
++					}				
++					break;
++#endif
++		#ifdef DBG_CONFIG_ERROR_DETECT
++				case 0x0f:
++						{
++							if(extra_arg == 0){	
++								DBG_871X("###### silent reset test.......#####\n");
++								rtw_hal_sreset_reset(padapter);
++							} else {
++								sreset_set_trigger_point(padapter, extra_arg);
++							}
++							
++						}
++				break;
++				case 0x15:
++					{
++						struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;	
++						DBG_871X("==>silent resete cnts:%d\n",pwrpriv->ips_enter_cnts);
++					}
++					break;	
++					
++		#endif	
++
++				case 0x10:// driver version display
++					DBG_871X("rtw driver version=%s\n", DRIVERVERSION);
++					break;
++				case 0x11:
++					{
++						DBG_871X("turn %s Rx RSSI display function\n",(extra_arg==1)?"on":"off");
++						padapter->bRxRSSIDisplay = extra_arg ;						
++					}
++					break;
++				case 0x12: //set rx_stbc
++				{
++					struct registry_priv	*pregpriv = &padapter->registrypriv;
++					// 0: disable, bit(0):enable 2.4g, bit(1):enable 5g, 0x3: enable both 2.4g and 5g
++					//default is set to enable 2.4GHZ for IOT issue with bufflao's AP at 5GHZ
++					if( pregpriv && (extra_arg == 0 || extra_arg == 1|| extra_arg == 2 || extra_arg == 3))
++					{
++						pregpriv->rx_stbc= extra_arg;
++						DBG_871X("set rx_stbc=%d\n",pregpriv->rx_stbc);
++					}
++					else
++						DBG_871X("get rx_stbc=%d\n",pregpriv->rx_stbc);
++					
++				}
++				break;
++				case 0x13: //set ampdu_enable
++				{
++					struct registry_priv	*pregpriv = &padapter->registrypriv;
++					// 0: disable, 0x1:enable (but wifi_spec should be 0), 0x2: force enable (don't care wifi_spec)
++					if( pregpriv && extra_arg >= 0 && extra_arg < 3 )
++					{
++						pregpriv->ampdu_enable= extra_arg;
++						DBG_871X("set ampdu_enable=%d\n",pregpriv->ampdu_enable);
++					}
++					else
++						DBG_871X("get ampdu_enable=%d\n",pregpriv->ampdu_enable);
++					
++				}
++				break;
++				case 0x14: //get wifi_spec
++				{
++					struct registry_priv	*pregpriv = &padapter->registrypriv;
++					DBG_871X("get wifi_spec=%d\n",pregpriv->wifi_spec);
++					
++				}
++				break;
++				case 0x22:
++					{
++						DBG_871X("turn %s the ForceWriteInitGain Variable\n",(extra_arg==1)?"on":"off");
++						padapter->bForceWriteInitGain = extra_arg;
++						break;
++					}
++				case 0x23:
++					{
++						DBG_871X("turn %s the bNotifyChannelChange Variable\n",(extra_arg==1)?"on":"off");
++						padapter->bNotifyChannelChange = extra_arg;
++						break;
++					}
++				case 0x24:
++					{
++#ifdef CONFIG_P2P
++						DBG_871X("turn %s the bShowGetP2PState Variable\n",(extra_arg==1)?"on":"off");
++						padapter->bShowGetP2PState = extra_arg;
++#endif // CONFIG_P2P
++						break;						
++					}
++#if 1
++				case 0xdd://registers dump , 0 for mac reg,1 for bb reg, 2 for rf reg
++					{						
++						if(extra_arg==0){
++							mac_reg_dump(padapter);
++						}
++						else if(extra_arg==1){
++							bb_reg_dump(padapter);
++						}
++						else if(extra_arg==2){
++							rf_reg_dump(padapter);
++						}
++																				
++					}
++					break;		
++#endif
++				case 0xee://turn on/off dynamic funcs
++					{
++						u8 dm_flag;
++
++						if(0xf==extra_arg){
++							rtw_hal_get_def_var(padapter, HAL_DEF_DBG_DM_FUNC,&dm_flag);							
++							DBG_871X(" === DMFlag(0x%02x) === \n",dm_flag);
++							DBG_871X("extra_arg = 0  - disable all dynamic func \n");
++							DBG_871X("extra_arg = 1  - disable DIG- BIT(0)\n");
++							DBG_871X("extra_arg = 2  - disable High power - BIT(1)\n");
++							DBG_871X("extra_arg = 3  - disable tx power tracking - BIT(2)\n");
++							DBG_871X("extra_arg = 4  - disable BT coexistence - BIT(3)\n");
++							DBG_871X("extra_arg = 5  - disable antenna diversity - BIT(4)\n");
++							DBG_871X("extra_arg = 6  - enable all dynamic func \n");							
++						}
++						else{
++							/*	extra_arg = 0  - disable all dynamic func
++								extra_arg = 1  - disable DIG
++								extra_arg = 2  - disable tx power tracking
++								extra_arg = 3  - turn on all dynamic func
++							*/			
++							rtw_hal_set_def_var(padapter, HAL_DEF_DBG_DM_FUNC, &(extra_arg));
++							rtw_hal_get_def_var(padapter, HAL_DEF_DBG_DM_FUNC,&dm_flag);							
++							DBG_871X(" === DMFlag(0x%02x) === \n",dm_flag);
++						}
++					}
++					break;
++
++				case 0xfd:
++					rtw_write8(padapter, 0xc50, arg);
++					DBG_871X("wr(0xc50)=0x%x\n", rtw_read8(padapter, 0xc50));
++					rtw_write8(padapter, 0xc58, arg);
++					DBG_871X("wr(0xc58)=0x%x\n", rtw_read8(padapter, 0xc58));
++					break;
++				case 0xfe:
++					DBG_871X("rd(0xc50)=0x%x\n", rtw_read8(padapter, 0xc50));
++					DBG_871X("rd(0xc58)=0x%x\n", rtw_read8(padapter, 0xc58));
++					break;
++				case 0xff:
++					{
++						DBG_871X("dbg(0x210)=0x%x\n", rtw_read32(padapter, 0x210));
++						DBG_871X("dbg(0x608)=0x%x\n", rtw_read32(padapter, 0x608));
++						DBG_871X("dbg(0x280)=0x%x\n", rtw_read32(padapter, 0x280));
++						DBG_871X("dbg(0x284)=0x%x\n", rtw_read32(padapter, 0x284));
++						DBG_871X("dbg(0x288)=0x%x\n", rtw_read32(padapter, 0x288));
++	
++						DBG_871X("dbg(0x664)=0x%x\n", rtw_read32(padapter, 0x664));
++
++
++						DBG_871X("\n");
++		
++						DBG_871X("dbg(0x430)=0x%x\n", rtw_read32(padapter, 0x430));
++						DBG_871X("dbg(0x438)=0x%x\n", rtw_read32(padapter, 0x438));
++
++						DBG_871X("dbg(0x440)=0x%x\n", rtw_read32(padapter, 0x440));
++	
++						DBG_871X("dbg(0x458)=0x%x\n", rtw_read32(padapter, 0x458));
++	
++						DBG_871X("dbg(0x484)=0x%x\n", rtw_read32(padapter, 0x484));
++						DBG_871X("dbg(0x488)=0x%x\n", rtw_read32(padapter, 0x488));
++	
++						DBG_871X("dbg(0x444)=0x%x\n", rtw_read32(padapter, 0x444));
++						DBG_871X("dbg(0x448)=0x%x\n", rtw_read32(padapter, 0x448));
++						DBG_871X("dbg(0x44c)=0x%x\n", rtw_read32(padapter, 0x44c));
++						DBG_871X("dbg(0x450)=0x%x\n", rtw_read32(padapter, 0x450));
++					}
++					break;
++			}			
++			break;
++		default:
++			DBG_871X("error dbg cmd!\n");
++			break;	
++	}
++	
++
++	return ret;
++
++}
++
++static int wpa_set_param(struct net_device *dev, u8 name, u32 value)
++{
++	uint ret=0;
++	u32 flags;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	
++	switch (name){
++	case IEEE_PARAM_WPA_ENABLED:
++
++		padapter->securitypriv.dot11AuthAlgrthm= dot11AuthAlgrthm_8021X; //802.1x
++		
++		//ret = ieee80211_wpa_enable(ieee, value);
++		
++		switch((value)&0xff)
++		{
++			case 1 : //WPA
++			padapter->securitypriv.ndisauthtype = Ndis802_11AuthModeWPAPSK; //WPA_PSK
++			padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption2Enabled;
++				break;
++			case 2: //WPA2
++			padapter->securitypriv.ndisauthtype = Ndis802_11AuthModeWPA2PSK; //WPA2_PSK
++			padapter->securitypriv.ndisencryptstatus = Ndis802_11Encryption3Enabled;
++				break;
++		}
++		
++		RT_TRACE(_module_rtl871x_ioctl_os_c,_drv_info_,("wpa_set_param:padapter->securitypriv.ndisauthtype=%d\n", padapter->securitypriv.ndisauthtype));
++		
++		break;
++
++	case IEEE_PARAM_TKIP_COUNTERMEASURES:
++		//ieee->tkip_countermeasures=value;
++		break;
++
++	case IEEE_PARAM_DROP_UNENCRYPTED: 
++	{
++		/* HACK:
++		 *
++		 * wpa_supplicant calls set_wpa_enabled when the driver
++		 * is loaded and unloaded, regardless of if WPA is being
++		 * used.  No other calls are made which can be used to
++		 * determine if encryption will be used or not prior to
++		 * association being expected.  If encryption is not being
++		 * used, drop_unencrypted is set to false, else true -- we
++		 * can use this to determine if the CAP_PRIVACY_ON bit should
++		 * be set.
++		 */
++		 
++#if 0	 
++		struct ieee80211_security sec = {
++			.flags = SEC_ENABLED,
++			.enabled = value,
++		};
++ 		ieee->drop_unencrypted = value;
++		/* We only change SEC_LEVEL for open mode. Others
++		 * are set by ipw_wpa_set_encryption.
++		 */
++		if (!value) {
++			sec.flags |= SEC_LEVEL;
++			sec.level = SEC_LEVEL_0;
++		}
++		else {
++			sec.flags |= SEC_LEVEL;
++			sec.level = SEC_LEVEL_1;
++		}
++		if (ieee->set_security)
++			ieee->set_security(ieee->dev, &sec);
++#endif		
++		break;
++
++	}
++	case IEEE_PARAM_PRIVACY_INVOKED:	
++		
++		//ieee->privacy_invoked=value;
++		
++		break;
++
++	case IEEE_PARAM_AUTH_ALGS:
++		
++		ret = wpa_set_auth_algs(dev, value);
++		
++		break;
++
++	case IEEE_PARAM_IEEE_802_1X:
++		
++		//ieee->ieee802_1x=value;		
++		
++		break;
++		
++	case IEEE_PARAM_WPAX_SELECT:
++		
++		// added for WPA2 mixed mode
++		//DBG_871X(KERN_WARNING "------------------------>wpax value = %x\n", value);
++		/*
++		spin_lock_irqsave(&ieee->wpax_suitlist_lock,flags);
++		ieee->wpax_type_set = 1;
++		ieee->wpax_type_notify = value;
++		spin_unlock_irqrestore(&ieee->wpax_suitlist_lock,flags);
++		*/
++		
++		break;
++
++	default:		
++
++
++		
++		ret = -EOPNOTSUPP;
++
++		
++		break;
++	
++	}
++
++	return ret;
++	
++}
++
++static int wpa_mlme(struct net_device *dev, u32 command, u32 reason)
++{	
++	int ret = 0;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++
++	switch (command)
++	{
++		case IEEE_MLME_STA_DEAUTH:
++
++			if(!rtw_set_802_11_disassociate(padapter))
++				ret = -1;		
++			
++			break;
++
++		case IEEE_MLME_STA_DISASSOC:
++		
++			if(!rtw_set_802_11_disassociate(padapter))
++				ret = -1;		
++	
++			break;
++
++		default:
++			ret = -EOPNOTSUPP;
++			break;
++	}
++
++	return ret;
++	
++}
++
++static int wpa_supplicant_ioctl(struct net_device *dev, struct iw_point *p)
++{
++	struct ieee_param *param;
++	uint ret=0;
++
++	//down(&ieee->wx_sem);	
++
++	if (p->length < sizeof(struct ieee_param) || !p->pointer){
++		ret = -EINVAL;
++		goto out;
++	}
++	
++	param = (struct ieee_param *)rtw_malloc(p->length);
++	if (param == NULL)
++	{
++		ret = -ENOMEM;
++		goto out;
++	}
++	
++	if (copy_from_user(param, p->pointer, p->length))
++	{
++		rtw_mfree((u8*)param, p->length);
++		ret = -EFAULT;
++		goto out;
++	}
++
++	switch (param->cmd) {
++
++	case IEEE_CMD_SET_WPA_PARAM:
++		ret = wpa_set_param(dev, param->u.wpa_param.name, param->u.wpa_param.value);
++		break;
++
++	case IEEE_CMD_SET_WPA_IE:
++		//ret = wpa_set_wpa_ie(dev, param, p->length);
++		ret =  rtw_set_wpa_ie((_adapter *)rtw_netdev_priv(dev), (char*)param->u.wpa_ie.data, (u16)param->u.wpa_ie.len);
++		break;
++
++	case IEEE_CMD_SET_ENCRYPTION:
++		ret = wpa_set_encryption(dev, param, p->length);
++		break;
++
++	case IEEE_CMD_MLME:
++		ret = wpa_mlme(dev, param->u.mlme.command, param->u.mlme.reason_code);
++		break;
++
++	default:
++		DBG_871X("Unknown WPA supplicant request: %d\n", param->cmd);
++		ret = -EOPNOTSUPP;
++		break;
++		
++	}
++
++	if (ret == 0 && copy_to_user(p->pointer, param, p->length))
++		ret = -EFAULT;
++
++	rtw_mfree((u8 *)param, p->length);
++	
++out:
++	
++	//up(&ieee->wx_sem);
++	
++	return ret;
++	
++}
++
++#ifdef CONFIG_AP_MODE
++static u8 set_pairwise_key(_adapter *padapter, struct sta_info *psta)
++{
++	struct cmd_obj*			ph2c;
++	struct set_stakey_parm	*psetstakey_para;
++	struct cmd_priv 			*pcmdpriv=&padapter->cmdpriv;	
++	u8	res=_SUCCESS;
++
++	ph2c = (struct cmd_obj*)rtw_zmalloc(sizeof(struct cmd_obj));
++	if ( ph2c == NULL){
++		res= _FAIL;
++		goto exit;
++	}
++
++	psetstakey_para = (struct set_stakey_parm*)rtw_zmalloc(sizeof(struct set_stakey_parm));
++	if(psetstakey_para==NULL){
++		rtw_mfree((u8 *) ph2c, sizeof(struct cmd_obj));
++		res=_FAIL;
++		goto exit;
++	}
++
++	init_h2fwcmd_w_parm_no_rsp(ph2c, psetstakey_para, _SetStaKey_CMD_);
++
++
++	psetstakey_para->algorithm = (u8)psta->dot118021XPrivacy;
++
++	_rtw_memcpy(psetstakey_para->addr, psta->hwaddr, ETH_ALEN);	
++	
++	_rtw_memcpy(psetstakey_para->key, &psta->dot118021x_UncstKey, 16);
++
++	
++	res = rtw_enqueue_cmd(pcmdpriv, ph2c);	
++
++exit:
++
++	return res;
++	
++}
++
++static int set_group_key(_adapter *padapter, u8 *key, u8 alg, int keyid)
++{
++	u8 keylen;
++	struct cmd_obj* pcmd;
++	struct setkey_parm *psetkeyparm;
++	struct cmd_priv	*pcmdpriv=&(padapter->cmdpriv);	
++	int res=_SUCCESS;
++
++	DBG_871X("%s\n", __FUNCTION__);
++	
++	pcmd = (struct cmd_obj*)rtw_zmalloc(sizeof(struct	cmd_obj));
++	if(pcmd==NULL){
++		res= _FAIL;
++		goto exit;
++	}
++	psetkeyparm=(struct setkey_parm*)rtw_zmalloc(sizeof(struct setkey_parm));
++	if(psetkeyparm==NULL){
++		rtw_mfree((unsigned char *)pcmd, sizeof(struct cmd_obj));
++		res= _FAIL;
++		goto exit;
++	}
++
++	_rtw_memset(psetkeyparm, 0, sizeof(struct setkey_parm));
++		
++	psetkeyparm->keyid=(u8)keyid;
++	if (is_wep_enc(alg))
++		padapter->securitypriv.key_mask |= BIT(psetkeyparm->keyid);
++
++	psetkeyparm->algorithm = alg;
++
++	psetkeyparm->set_tx = 1;
++
++	switch(alg)
++	{
++		case _WEP40_:					
++			keylen = 5;
++			break;
++		case _WEP104_:
++			keylen = 13;			
++			break;
++		case _TKIP_:
++		case _TKIP_WTMIC_:		
++		case _AES_:
++			keylen = 16;		
++		default:
++			keylen = 16;		
++	}
++
++	_rtw_memcpy(&(psetkeyparm->key[0]), key, keylen);
++	
++	pcmd->cmdcode = _SetKey_CMD_;
++	pcmd->parmbuf = (u8 *)psetkeyparm;   
++	pcmd->cmdsz =  (sizeof(struct setkey_parm));  
++	pcmd->rsp = NULL;
++	pcmd->rspsz = 0;
++
++
++	_rtw_init_listhead(&pcmd->list);
++
++	res = rtw_enqueue_cmd(pcmdpriv, pcmd);
++
++exit:
++
++	return res;
++	
++
++}
++
++static int set_wep_key(_adapter *padapter, u8 *key, u8 keylen, int keyid)
++{	
++	u8 alg;
++
++	switch(keylen)
++	{
++		case 5:
++			alg =_WEP40_;			
++			break;
++		case 13:
++			alg =_WEP104_;			
++			break;
++		default:
++			alg =_NO_PRIVACY_;			
++	}
++
++	return set_group_key(padapter, key, alg, keyid);
++
++}
++
++
++static int rtw_set_encryption(struct net_device *dev, struct ieee_param *param, u32 param_len)
++{
++	int ret = 0;
++	u32 wep_key_idx, wep_key_len,wep_total_len;
++	NDIS_802_11_WEP	 *pwep = NULL;
++	struct sta_info *psta = NULL, *pbcmc_sta = NULL;	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_priv 	*pmlmepriv = &padapter->mlmepriv;
++	struct security_priv* psecuritypriv=&(padapter->securitypriv);
++	struct sta_priv *pstapriv = &padapter->stapriv;
++
++	DBG_871X("%s\n", __FUNCTION__);
++
++	param->u.crypt.err = 0;
++	param->u.crypt.alg[IEEE_CRYPT_ALG_NAME_LEN - 1] = '\0';
++
++	//sizeof(struct ieee_param) = 64 bytes;
++	//if (param_len !=  (u32) ((u8 *) param->u.crypt.key - (u8 *) param) + param->u.crypt.key_len)
++	if (param_len !=  sizeof(struct ieee_param) + param->u.crypt.key_len)
++	{
++		ret =  -EINVAL;
++		goto exit;
++	}
++
++	if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
++	    param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
++	    param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) 
++	{
++		if (param->u.crypt.idx >= WEP_KEYS)
++		{
++			ret = -EINVAL;
++			goto exit;
++		}	
++	}
++	else 
++	{		
++		psta = rtw_get_stainfo(pstapriv, param->sta_addr);
++		if(!psta)
++		{
++			//ret = -EINVAL;
++			DBG_871X("rtw_set_encryption(), sta has already been removed or never been added\n");
++			goto exit;
++		}			
++	}
++
++	if (strcmp(param->u.crypt.alg, "none") == 0 && (psta==NULL))
++	{
++		//todo:clear default encryption keys
++
++		DBG_871X("clear default encryption keys, keyid=%d\n", param->u.crypt.idx);
++		
++		goto exit;
++	}
++
++
++	if (strcmp(param->u.crypt.alg, "WEP") == 0 && (psta==NULL))
++	{		
++		DBG_871X("r871x_set_encryption, crypt.alg = WEP\n");
++		
++		wep_key_idx = param->u.crypt.idx;
++		wep_key_len = param->u.crypt.key_len;
++					
++		DBG_871X("r871x_set_encryption, wep_key_idx=%d, len=%d\n", wep_key_idx, wep_key_len);
++
++		if((wep_key_idx >= WEP_KEYS) || (wep_key_len<=0))
++		{
++			ret = -EINVAL;
++			goto exit;
++		}
++			
++
++		if (wep_key_len > 0) 
++		{			
++		 	wep_key_len = wep_key_len <= 5 ? 5 : 13;
++			wep_total_len = wep_key_len + FIELD_OFFSET(NDIS_802_11_WEP, KeyMaterial);
++		 	pwep =(NDIS_802_11_WEP *)rtw_malloc(wep_total_len);
++			if(pwep == NULL){
++				DBG_871X(" r871x_set_encryption: pwep allocate fail !!!\n");
++				goto exit;
++			}
++			
++		 	_rtw_memset(pwep, 0, wep_total_len);
++		
++		 	pwep->KeyLength = wep_key_len;
++			pwep->Length = wep_total_len;
++			
++		}
++		
++		pwep->KeyIndex = wep_key_idx;
++
++		_rtw_memcpy(pwep->KeyMaterial,  param->u.crypt.key, pwep->KeyLength);
++
++		if(param->u.crypt.set_tx)
++		{
++			DBG_871X("wep, set_tx=1\n");
++
++			psecuritypriv->ndisencryptstatus = Ndis802_11Encryption1Enabled;
++			psecuritypriv->dot11PrivacyAlgrthm=_WEP40_;
++			psecuritypriv->dot118021XGrpPrivacy=_WEP40_;
++			
++			if(pwep->KeyLength==13)
++			{
++				psecuritypriv->dot11PrivacyAlgrthm=_WEP104_;
++				psecuritypriv->dot118021XGrpPrivacy=_WEP104_;
++			}
++
++		
++			psecuritypriv->dot11PrivacyKeyIndex = wep_key_idx;
++			
++			_rtw_memcpy(&(psecuritypriv->dot11DefKey[wep_key_idx].skey[0]), pwep->KeyMaterial, pwep->KeyLength);
++
++			psecuritypriv->dot11DefKeylen[wep_key_idx]=pwep->KeyLength;
++
++			set_wep_key(padapter, pwep->KeyMaterial, pwep->KeyLength, wep_key_idx);		
++
++			
++		}
++		else
++		{
++			DBG_871X("wep, set_tx=0\n");
++			
++			//don't update "psecuritypriv->dot11PrivacyAlgrthm" and 
++			//"psecuritypriv->dot11PrivacyKeyIndex=keyid", but can rtw_set_key to cam
++					
++		      _rtw_memcpy(&(psecuritypriv->dot11DefKey[wep_key_idx].skey[0]), pwep->KeyMaterial, pwep->KeyLength);
++
++			psecuritypriv->dot11DefKeylen[wep_key_idx] = pwep->KeyLength;			
++
++			set_wep_key(padapter, pwep->KeyMaterial, pwep->KeyLength, wep_key_idx);
++			
++		}
++
++		goto exit;
++		
++	}
++
++	
++	if(!psta && check_fwstate(pmlmepriv, WIFI_AP_STATE)) // //group key
++	{
++		if(param->u.crypt.set_tx ==1)
++		{
++			if(strcmp(param->u.crypt.alg, "WEP") == 0)
++			{
++				DBG_871X("%s, set group_key, WEP\n", __FUNCTION__);
++				
++				_rtw_memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey,  param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len));
++					
++				psecuritypriv->dot118021XGrpPrivacy = _WEP40_;
++				if(param->u.crypt.key_len==13)
++				{						
++						psecuritypriv->dot118021XGrpPrivacy = _WEP104_;
++				}
++				
++			}
++			else if(strcmp(param->u.crypt.alg, "TKIP") == 0)
++			{						
++				DBG_871X("%s, set group_key, TKIP\n", __FUNCTION__);
++				
++				psecuritypriv->dot118021XGrpPrivacy = _TKIP_;
++
++				_rtw_memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey,  param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len));
++				
++				//DEBUG_ERR("set key length :param->u.crypt.key_len=%d\n", param->u.crypt.key_len);
++				//set mic key
++				_rtw_memcpy(psecuritypriv->dot118021XGrptxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[16]), 8);
++				_rtw_memcpy(psecuritypriv->dot118021XGrprxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[24]), 8);
++
++				psecuritypriv->busetkipkey = _TRUE;
++											
++			}
++			else if(strcmp(param->u.crypt.alg, "CCMP") == 0)
++			{
++				DBG_871X("%s, set group_key, CCMP\n", __FUNCTION__);
++			
++				psecuritypriv->dot118021XGrpPrivacy = _AES_;
++
++				_rtw_memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey,  param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len));
++			}
++			else
++			{
++				DBG_871X("%s, set group_key, none\n", __FUNCTION__);
++				
++				psecuritypriv->dot118021XGrpPrivacy = _NO_PRIVACY_;
++			}
++
++			psecuritypriv->dot118021XGrpKeyid = param->u.crypt.idx;
++
++			psecuritypriv->binstallGrpkey = _TRUE;
++
++			psecuritypriv->dot11PrivacyAlgrthm = psecuritypriv->dot118021XGrpPrivacy;//!!!
++								
++			set_group_key(padapter, param->u.crypt.key, psecuritypriv->dot118021XGrpPrivacy, param->u.crypt.idx);
++			
++			pbcmc_sta=rtw_get_bcmc_stainfo(padapter);
++			if(pbcmc_sta)
++			{
++				pbcmc_sta->ieee8021x_blocked = _FALSE;
++				pbcmc_sta->dot118021XPrivacy= psecuritypriv->dot118021XGrpPrivacy;//rx will use bmc_sta's dot118021XPrivacy			
++			}	
++						
++		}
++
++		goto exit;
++		
++	}	
++
++	if(psecuritypriv->dot11AuthAlgrthm == dot11AuthAlgrthm_8021X && psta) // psk/802_1x
++	{
++		if(check_fwstate(pmlmepriv, WIFI_AP_STATE))
++		{
++			if(param->u.crypt.set_tx ==1)
++			{ 
++				_rtw_memcpy(psta->dot118021x_UncstKey.skey,  param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len));
++				
++				if(strcmp(param->u.crypt.alg, "WEP") == 0)
++				{
++					DBG_871X("%s, set pairwise key, WEP\n", __FUNCTION__);
++					
++					psta->dot118021XPrivacy = _WEP40_;
++					if(param->u.crypt.key_len==13)
++					{						
++						psta->dot118021XPrivacy = _WEP104_;
++					}
++				}
++				else if(strcmp(param->u.crypt.alg, "TKIP") == 0)
++				{						
++					DBG_871X("%s, set pairwise key, TKIP\n", __FUNCTION__);
++					
++					psta->dot118021XPrivacy = _TKIP_;
++				
++					//DEBUG_ERR("set key length :param->u.crypt.key_len=%d\n", param->u.crypt.key_len);
++					//set mic key
++					_rtw_memcpy(psta->dot11tkiptxmickey.skey, &(param->u.crypt.key[16]), 8);
++					_rtw_memcpy(psta->dot11tkiprxmickey.skey, &(param->u.crypt.key[24]), 8);
++
++					psecuritypriv->busetkipkey = _TRUE;
++											
++				}
++				else if(strcmp(param->u.crypt.alg, "CCMP") == 0)
++				{
++
++					DBG_871X("%s, set pairwise key, CCMP\n", __FUNCTION__);
++					
++					psta->dot118021XPrivacy = _AES_;
++				}
++				else
++				{
++					DBG_871X("%s, set pairwise key, none\n", __FUNCTION__);
++					
++					psta->dot118021XPrivacy = _NO_PRIVACY_;
++				}
++						
++				set_pairwise_key(padapter, psta);
++					
++				psta->ieee8021x_blocked = _FALSE;
++					
++			}			
++			else//group key???
++			{ 
++				if(strcmp(param->u.crypt.alg, "WEP") == 0)
++				{
++					_rtw_memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey,  param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len));
++					
++					psecuritypriv->dot118021XGrpPrivacy = _WEP40_;
++					if(param->u.crypt.key_len==13)
++					{						
++						psecuritypriv->dot118021XGrpPrivacy = _WEP104_;
++					}
++				}
++				else if(strcmp(param->u.crypt.alg, "TKIP") == 0)
++				{						
++					psecuritypriv->dot118021XGrpPrivacy = _TKIP_;
++
++					_rtw_memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey,  param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len));
++				
++					//DEBUG_ERR("set key length :param->u.crypt.key_len=%d\n", param->u.crypt.key_len);
++					//set mic key
++					_rtw_memcpy(psecuritypriv->dot118021XGrptxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[16]), 8);
++					_rtw_memcpy(psecuritypriv->dot118021XGrprxmickey[param->u.crypt.idx].skey, &(param->u.crypt.key[24]), 8);
++
++					psecuritypriv->busetkipkey = _TRUE;
++											
++				}
++				else if(strcmp(param->u.crypt.alg, "CCMP") == 0)
++				{
++					psecuritypriv->dot118021XGrpPrivacy = _AES_;
++
++					_rtw_memcpy(psecuritypriv->dot118021XGrpKey[param->u.crypt.idx].skey,  param->u.crypt.key, (param->u.crypt.key_len>16 ?16:param->u.crypt.key_len));
++				}
++				else
++				{
++					psecuritypriv->dot118021XGrpPrivacy = _NO_PRIVACY_;
++				}
++
++				psecuritypriv->dot118021XGrpKeyid = param->u.crypt.idx;
++
++				psecuritypriv->binstallGrpkey = _TRUE;	
++								
++				psecuritypriv->dot11PrivacyAlgrthm = psecuritypriv->dot118021XGrpPrivacy;//!!!
++								
++				set_group_key(padapter, param->u.crypt.key, psecuritypriv->dot118021XGrpPrivacy, param->u.crypt.idx);
++			
++				pbcmc_sta=rtw_get_bcmc_stainfo(padapter);
++				if(pbcmc_sta)
++				{
++					pbcmc_sta->ieee8021x_blocked = _FALSE;
++					pbcmc_sta->dot118021XPrivacy= psecuritypriv->dot118021XGrpPrivacy;//rx will use bmc_sta's dot118021XPrivacy			
++				}					
++
++			}
++			
++		}
++				
++	}
++
++exit:
++
++	if(pwep)
++	{
++		rtw_mfree((u8 *)pwep,wep_total_len);		
++	}	
++	
++	return ret;
++	
++}
++
++static int rtw_set_beacon(struct net_device *dev, struct ieee_param *param, int len)
++{
++	int ret=0;	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	unsigned char *pbuf = param->u.bcn_ie.buf;
++
++
++	DBG_871X("%s, len=%d\n", __FUNCTION__, len);
++
++	if(check_fwstate(pmlmepriv, WIFI_AP_STATE) != _TRUE)
++		return -EINVAL;
++
++	_rtw_memcpy(&pstapriv->max_num_sta, param->u.bcn_ie.reserved, 2);
++
++	if((pstapriv->max_num_sta>NUM_STA) || (pstapriv->max_num_sta<=0))
++		pstapriv->max_num_sta = NUM_STA;
++
++
++	if(rtw_check_beacon_data(padapter, pbuf,  (len-12-2)) == _SUCCESS)// 12 = param header, 2:no packed
++		ret = 0;
++	else
++		ret = -EINVAL;
++	
++
++	return ret;
++	
++}
++
++static int rtw_hostapd_sta_flush(struct net_device *dev)
++{
++	//_irqL irqL;
++	//_list	*phead, *plist;
++	int ret=0;	
++	//struct sta_info *psta = NULL;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);	
++	//struct sta_priv *pstapriv = &padapter->stapriv;
++
++	DBG_871X("%s\n", __FUNCTION__);
++
++	flush_all_cam_entry(padapter);	//clear CAM
++
++	ret = rtw_sta_flush(padapter);	
++
++	return ret;
++
++}
++
++static int rtw_add_sta(struct net_device *dev, struct ieee_param *param)
++{
++	_irqL irqL;
++	int ret=0;	
++	struct sta_info *psta = NULL;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct sta_priv *pstapriv = &padapter->stapriv;
++
++	DBG_871X("rtw_add_sta(aid=%d)=" MAC_FMT "\n", param->u.add_sta.aid, MAC_ARG(param->sta_addr));
++	
++	if(check_fwstate(pmlmepriv, (_FW_LINKED|WIFI_AP_STATE)) != _TRUE)	
++	{
++		return -EINVAL;		
++	}
++
++	if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
++	    param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
++	    param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) 
++	{
++		return -EINVAL;	
++	}
++
++/*
++	psta = rtw_get_stainfo(pstapriv, param->sta_addr);
++	if(psta)
++	{
++		DBG_871X("rtw_add_sta(), free has been added psta=%p\n", psta);
++		_enter_critical_bh(&(pstapriv->sta_hash_lock), &irqL);		
++		rtw_free_stainfo(padapter,  psta);		
++		_exit_critical_bh(&(pstapriv->sta_hash_lock), &irqL);
++
++		psta = NULL;
++	}	
++*/
++	//psta = rtw_alloc_stainfo(pstapriv, param->sta_addr);
++	psta = rtw_get_stainfo(pstapriv, param->sta_addr);
++	if(psta)
++	{
++		int flags = param->u.add_sta.flags;			
++		
++		//DBG_871X("rtw_add_sta(), init sta's variables, psta=%p\n", psta);
++		
++		psta->aid = param->u.add_sta.aid;//aid=1~2007
++
++		_rtw_memcpy(psta->bssrateset, param->u.add_sta.tx_supp_rates, 16);
++		
++		
++		//check wmm cap.
++		if(WLAN_STA_WME&flags)
++			psta->qos_option = 1;
++		else
++			psta->qos_option = 0;
++
++		if(pmlmepriv->qospriv.qos_option == 0)	
++			psta->qos_option = 0;
++
++		
++#ifdef CONFIG_80211N_HT		
++		//chec 802.11n ht cap.
++		if(WLAN_STA_HT&flags)
++		{
++			psta->htpriv.ht_option = _TRUE;
++			psta->qos_option = 1;
++			_rtw_memcpy((void*)&psta->htpriv.ht_cap, (void*)&param->u.add_sta.ht_cap, sizeof(struct rtw_ieee80211_ht_cap));
++		}
++		else		
++		{
++			psta->htpriv.ht_option = _FALSE;
++		}
++		
++		if(pmlmepriv->htpriv.ht_option == _FALSE)	
++			psta->htpriv.ht_option = _FALSE;
++#endif		
++
++
++		update_sta_info_apmode(padapter, psta);
++		
++		
++	}
++	else
++	{
++		ret = -ENOMEM;
++	}	
++	
++	return ret;
++	
++}
++
++static int rtw_del_sta(struct net_device *dev, struct ieee_param *param)
++{
++	_irqL irqL;
++	int ret=0;	
++	struct sta_info *psta = NULL;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct sta_priv *pstapriv = &padapter->stapriv;
++
++	DBG_871X("rtw_del_sta=" MAC_FMT "\n", MAC_ARG(param->sta_addr));
++		
++	if(check_fwstate(pmlmepriv, (_FW_LINKED|WIFI_AP_STATE)) != _TRUE)		
++	{
++		return -EINVAL;		
++	}
++
++	if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
++	    param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
++	    param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) 
++	{
++		return -EINVAL;	
++	}
++
++	psta = rtw_get_stainfo(pstapriv, param->sta_addr);
++	if(psta)
++	{
++		u8 updated=_FALSE;
++	
++		//DBG_871X("free psta=%p, aid=%d\n", psta, psta->aid);
++
++		_enter_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++		if(rtw_is_list_empty(&psta->asoc_list)==_FALSE)
++		{			
++			rtw_list_delete(&psta->asoc_list);
++			pstapriv->asoc_list_cnt--;
++			updated = ap_free_sta(padapter, psta, _TRUE, WLAN_REASON_DEAUTH_LEAVING);
++
++		}
++		_exit_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++		
++		associated_clients_update(padapter, updated);
++	
++		psta = NULL;
++		
++	}
++	else
++	{
++		DBG_871X("rtw_del_sta(), sta has already been removed or never been added\n");
++		
++		//ret = -1;
++	}
++	
++	
++	return ret;
++	
++}
++
++static int rtw_ioctl_get_sta_data(struct net_device *dev, struct ieee_param *param, int len)
++{
++	int ret=0;	
++	struct sta_info *psta = NULL;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct sta_priv *pstapriv = &padapter->stapriv;
++	struct ieee_param_ex *param_ex = (struct ieee_param_ex *)param;
++	struct sta_data *psta_data = (struct sta_data *)param_ex->data;
++
++	DBG_871X("rtw_ioctl_get_sta_info, sta_addr: " MAC_FMT "\n", MAC_ARG(param_ex->sta_addr));
++
++	if(check_fwstate(pmlmepriv, (_FW_LINKED|WIFI_AP_STATE)) != _TRUE)		
++	{
++		return -EINVAL;		
++	}
++
++	if (param_ex->sta_addr[0] == 0xff && param_ex->sta_addr[1] == 0xff &&
++	    param_ex->sta_addr[2] == 0xff && param_ex->sta_addr[3] == 0xff &&
++	    param_ex->sta_addr[4] == 0xff && param_ex->sta_addr[5] == 0xff) 
++	{
++		return -EINVAL;	
++	}
++
++	psta = rtw_get_stainfo(pstapriv, param_ex->sta_addr);
++	if(psta)
++	{
++#if 0
++		struct {
++			u16 aid;
++			u16 capability;
++			int flags;
++			u32 sta_set;
++			u8 tx_supp_rates[16];	
++			u32 tx_supp_rates_len;
++			struct rtw_ieee80211_ht_cap ht_cap;
++			u64	rx_pkts;
++			u64	rx_bytes;
++			u64	rx_drops;
++			u64	tx_pkts;
++			u64	tx_bytes;
++			u64	tx_drops;
++		} get_sta;		
++#endif
++		psta_data->aid = (u16)psta->aid;
++		psta_data->capability = psta->capability;
++		psta_data->flags = psta->flags;
++
++/*
++		nonerp_set : BIT(0)
++		no_short_slot_time_set : BIT(1)
++		no_short_preamble_set : BIT(2)
++		no_ht_gf_set : BIT(3)
++		no_ht_set : BIT(4)
++		ht_20mhz_set : BIT(5)
++*/
++
++		psta_data->sta_set =((psta->nonerp_set) |
++							(psta->no_short_slot_time_set <<1) |
++							(psta->no_short_preamble_set <<2) |
++							(psta->no_ht_gf_set <<3) |
++							(psta->no_ht_set <<4) |
++							(psta->ht_20mhz_set <<5));
++
++		psta_data->tx_supp_rates_len =  psta->bssratelen;
++		_rtw_memcpy(psta_data->tx_supp_rates, psta->bssrateset, psta->bssratelen);
++
++		_rtw_memcpy(&psta_data->ht_cap, &psta->htpriv.ht_cap, sizeof(struct rtw_ieee80211_ht_cap));
++
++		psta_data->rx_pkts = psta->sta_stats.rx_data_pkts;
++		psta_data->rx_bytes = psta->sta_stats.rx_bytes;
++		psta_data->rx_drops = psta->sta_stats.rx_drops;
++
++		psta_data->tx_pkts = psta->sta_stats.tx_pkts;
++		psta_data->tx_bytes = psta->sta_stats.tx_bytes;
++		psta_data->tx_drops = psta->sta_stats.tx_drops;
++		
++
++	}
++	else
++	{
++		ret = -1;
++	}
++
++	return ret;
++
++}
++
++static int rtw_get_sta_wpaie(struct net_device *dev, struct ieee_param *param)
++{
++	int ret=0;	
++	struct sta_info *psta = NULL;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct sta_priv *pstapriv = &padapter->stapriv;
++
++	DBG_871X("rtw_get_sta_wpaie, sta_addr: " MAC_FMT "\n", MAC_ARG(param->sta_addr));
++
++	if(check_fwstate(pmlmepriv, (_FW_LINKED|WIFI_AP_STATE)) != _TRUE)		
++	{
++		return -EINVAL;		
++	}
++
++	if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
++	    param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
++	    param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) 
++	{
++		return -EINVAL;	
++	}
++
++	psta = rtw_get_stainfo(pstapriv, param->sta_addr);
++	if(psta)
++	{
++		if((psta->wpa_ie[0] == WLAN_EID_RSN) || (psta->wpa_ie[0] == WLAN_EID_GENERIC))
++		{
++			int wpa_ie_len;
++			int copy_len;
++
++			wpa_ie_len = psta->wpa_ie[1];
++			
++			copy_len = ((wpa_ie_len+2) > sizeof(psta->wpa_ie)) ? (sizeof(psta->wpa_ie)):(wpa_ie_len+2);
++				
++			param->u.wpa_ie.len = copy_len;
++
++			_rtw_memcpy(param->u.wpa_ie.reserved, psta->wpa_ie, copy_len);
++		}
++		else
++		{
++			//ret = -1;
++			DBG_871X("sta's wpa_ie is NONE\n");
++		}		
++	}
++	else
++	{
++		ret = -1;
++	}
++
++	return ret;
++
++}
++
++static int rtw_set_wps_beacon(struct net_device *dev, struct ieee_param *param, int len)
++{
++	int ret=0;
++	unsigned char wps_oui[4]={0x0,0x50,0xf2,0x04};
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	int ie_len;
++
++	DBG_871X("%s, len=%d\n", __FUNCTION__, len);
++
++	if(check_fwstate(pmlmepriv, WIFI_AP_STATE) != _TRUE)
++		return -EINVAL;
++
++	ie_len = len-12-2;// 12 = param header, 2:no packed
++
++
++	if(pmlmepriv->wps_beacon_ie)
++	{
++		rtw_mfree(pmlmepriv->wps_beacon_ie, pmlmepriv->wps_beacon_ie_len);
++		pmlmepriv->wps_beacon_ie = NULL;			
++	}	
++
++	if(ie_len>0)
++	{
++		pmlmepriv->wps_beacon_ie = rtw_malloc(ie_len);
++		pmlmepriv->wps_beacon_ie_len = ie_len;
++		if ( pmlmepriv->wps_beacon_ie == NULL) {
++			DBG_871X("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__);
++			return -EINVAL;
++		}
++
++		_rtw_memcpy(pmlmepriv->wps_beacon_ie, param->u.bcn_ie.buf, ie_len);
++
++		update_beacon(padapter, _VENDOR_SPECIFIC_IE_, wps_oui, _TRUE);
++		
++		pmlmeext->bstart_bss = _TRUE;
++		
++	}
++	
++	
++	return ret;		
++
++}
++
++static int rtw_set_wps_probe_resp(struct net_device *dev, struct ieee_param *param, int len)
++{
++	int ret=0;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	int ie_len;
++
++	DBG_871X("%s, len=%d\n", __FUNCTION__, len);
++
++	if(check_fwstate(pmlmepriv, WIFI_AP_STATE) != _TRUE)
++		return -EINVAL;
++
++	ie_len = len-12-2;// 12 = param header, 2:no packed
++
++
++	if(pmlmepriv->wps_probe_resp_ie)
++	{
++		rtw_mfree(pmlmepriv->wps_probe_resp_ie, pmlmepriv->wps_probe_resp_ie_len);
++		pmlmepriv->wps_probe_resp_ie = NULL;			
++	}	
++
++	if(ie_len>0)
++	{
++		pmlmepriv->wps_probe_resp_ie = rtw_malloc(ie_len);
++		pmlmepriv->wps_probe_resp_ie_len = ie_len;
++		if ( pmlmepriv->wps_probe_resp_ie == NULL) {
++			DBG_871X("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__);
++			return -EINVAL;
++		}
++		_rtw_memcpy(pmlmepriv->wps_probe_resp_ie, param->u.bcn_ie.buf, ie_len);		
++	}
++	
++	
++	return ret;
++
++}
++
++static int rtw_set_wps_assoc_resp(struct net_device *dev, struct ieee_param *param, int len)
++{
++	int ret=0;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	int ie_len;
++
++	DBG_871X("%s, len=%d\n", __FUNCTION__, len);
++
++	if(check_fwstate(pmlmepriv, WIFI_AP_STATE) != _TRUE)
++		return -EINVAL;
++
++	ie_len = len-12-2;// 12 = param header, 2:no packed
++
++
++	if(pmlmepriv->wps_assoc_resp_ie)
++	{
++		rtw_mfree(pmlmepriv->wps_assoc_resp_ie, pmlmepriv->wps_assoc_resp_ie_len);
++		pmlmepriv->wps_assoc_resp_ie = NULL;			
++	}	
++
++	if(ie_len>0)
++	{
++		pmlmepriv->wps_assoc_resp_ie = rtw_malloc(ie_len);
++		pmlmepriv->wps_assoc_resp_ie_len = ie_len;
++		if ( pmlmepriv->wps_assoc_resp_ie == NULL) {
++			DBG_871X("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__);
++			return -EINVAL;
++		}
++		
++		_rtw_memcpy(pmlmepriv->wps_assoc_resp_ie, param->u.bcn_ie.buf, ie_len);		
++	}
++	
++	
++	return ret;
++
++}
++
++static int rtw_set_hidden_ssid(struct net_device *dev, struct ieee_param *param, int len)
++{
++	int ret=0;
++	_adapter *adapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_priv *mlmepriv = &(adapter->mlmepriv);
++	struct mlme_ext_priv	*mlmeext = &(adapter->mlmeextpriv);
++	struct mlme_ext_info	*mlmeinfo = &(mlmeext->mlmext_info);
++	int ie_len;
++	u8 *ssid_ie;
++	char ssid[NDIS_802_11_LENGTH_SSID + 1];
++	sint ssid_len;
++	u8 ignore_broadcast_ssid;
++
++	if(check_fwstate(mlmepriv, WIFI_AP_STATE) != _TRUE)
++		return -EPERM;
++
++	if (param->u.bcn_ie.reserved[0] != 0xea)
++		return -EINVAL;
++
++	mlmeinfo->hidden_ssid_mode = ignore_broadcast_ssid = param->u.bcn_ie.reserved[1];
++
++	ie_len = len-12-2;// 12 = param header, 2:no packed
++	ssid_ie = rtw_get_ie(param->u.bcn_ie.buf,  WLAN_EID_SSID, &ssid_len, ie_len);
++
++	if (ssid_ie && ssid_len) {
++		WLAN_BSSID_EX *pbss_network = &mlmepriv->cur_network.network;
++		WLAN_BSSID_EX *pbss_network_ext = &mlmeinfo->network;
++
++		_rtw_memcpy(ssid, ssid_ie+2, ssid_len);
++		ssid[ssid_len>NDIS_802_11_LENGTH_SSID?NDIS_802_11_LENGTH_SSID:ssid_len] = 0x0;
++
++		if(0)
++		DBG_871X(FUNC_ADPT_FMT" ssid:(%s,%d), from ie:(%s,%d), (%s,%d)\n", FUNC_ADPT_ARG(adapter),
++			ssid, ssid_len,
++			pbss_network->Ssid.Ssid, pbss_network->Ssid.SsidLength,
++			pbss_network_ext->Ssid.Ssid, pbss_network_ext->Ssid.SsidLength);
++
++		_rtw_memcpy(pbss_network->Ssid.Ssid, (void *)ssid, ssid_len);
++		pbss_network->Ssid.SsidLength = ssid_len;
++		_rtw_memcpy(pbss_network_ext->Ssid.Ssid, (void *)ssid, ssid_len);
++		pbss_network_ext->Ssid.SsidLength = ssid_len;
++
++		if(0)
++		DBG_871X(FUNC_ADPT_FMT" after ssid:(%s,%d), (%s,%d)\n", FUNC_ADPT_ARG(adapter),
++			pbss_network->Ssid.Ssid, pbss_network->Ssid.SsidLength,
++			pbss_network_ext->Ssid.Ssid, pbss_network_ext->Ssid.SsidLength);
++	}
++
++	DBG_871X(FUNC_ADPT_FMT" ignore_broadcast_ssid:%d, %s,%d\n", FUNC_ADPT_ARG(adapter),
++		ignore_broadcast_ssid, ssid, ssid_len);
++
++	return ret;
++}
++
++static int rtw_ioctl_acl_remove_sta(struct net_device *dev, struct ieee_param *param, int len)
++{
++	int ret=0;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);	
++
++	if(check_fwstate(pmlmepriv, WIFI_AP_STATE) != _TRUE)
++		return -EINVAL;
++
++	if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
++	    param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
++	    param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) 
++	{
++		return -EINVAL;	
++	}
++
++	ret = rtw_acl_remove_sta(padapter, param->sta_addr);	
++
++	return ret;		
++
++}
++
++static int rtw_ioctl_acl_add_sta(struct net_device *dev, struct ieee_param *param, int len)
++{
++	int ret=0;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	
++	if(check_fwstate(pmlmepriv, WIFI_AP_STATE) != _TRUE)
++		return -EINVAL;
++
++	if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
++	    param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
++	    param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) 
++	{
++		return -EINVAL;	
++	}
++
++	ret = rtw_acl_add_sta(padapter, param->sta_addr);	
++
++	return ret;		
++
++}
++
++static int rtw_ioctl_set_macaddr_acl(struct net_device *dev, struct ieee_param *param, int len)
++{
++	int ret=0;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);	
++	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++	
++	if(check_fwstate(pmlmepriv, WIFI_AP_STATE) != _TRUE)
++		return -EINVAL;	
++	
++	rtw_set_macaddr_acl(padapter, param->u.mlme.command);	
++
++	return ret;
++}
++
++static int rtw_hostapd_ioctl(struct net_device *dev, struct iw_point *p)
++{
++	struct ieee_param *param;
++	int ret=0;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++
++	//DBG_871X("%s\n", __FUNCTION__);
++
++	/*
++	* this function is expect to call in master mode, which allows no power saving
++	* so, we just check hw_init_completed instead of call rfpwrstate_check()
++	*/
++
++	if (padapter->hw_init_completed==_FALSE){
++		ret = -EPERM;
++		goto out;
++	}
++
++
++	//if (p->length < sizeof(struct ieee_param) || !p->pointer){
++	if(!p->pointer){
++		ret = -EINVAL;
++		goto out;
++	}
++	
++	param = (struct ieee_param *)rtw_malloc(p->length);
++	if (param == NULL)
++	{
++		ret = -ENOMEM;
++		goto out;
++	}
++	
++	if (copy_from_user(param, p->pointer, p->length))
++	{
++		rtw_mfree((u8*)param, p->length);
++		ret = -EFAULT;
++		goto out;
++	}
++
++	//DBG_871X("%s, cmd=%d\n", __FUNCTION__, param->cmd);
++
++	switch (param->cmd) 
++	{	
++		case RTL871X_HOSTAPD_FLUSH:
++
++			ret = rtw_hostapd_sta_flush(dev);
++
++			break;
++	
++		case RTL871X_HOSTAPD_ADD_STA:	
++			
++			ret = rtw_add_sta(dev, param);					
++			
++			break;
++
++		case RTL871X_HOSTAPD_REMOVE_STA:
++
++			ret = rtw_del_sta(dev, param);
++
++			break;
++	
++		case RTL871X_HOSTAPD_SET_BEACON:
++
++			ret = rtw_set_beacon(dev, param, p->length);
++
++			break;
++			
++		case RTL871X_SET_ENCRYPTION:
++
++			ret = rtw_set_encryption(dev, param, p->length);
++			
++			break;
++			
++		case RTL871X_HOSTAPD_GET_WPAIE_STA:
++
++			ret = rtw_get_sta_wpaie(dev, param);
++	
++			break;
++			
++		case RTL871X_HOSTAPD_SET_WPS_BEACON:
++
++			ret = rtw_set_wps_beacon(dev, param, p->length);
++
++			break;
++
++		case RTL871X_HOSTAPD_SET_WPS_PROBE_RESP:
++
++			ret = rtw_set_wps_probe_resp(dev, param, p->length);
++			
++	 		break;
++			
++		case RTL871X_HOSTAPD_SET_WPS_ASSOC_RESP:
++
++			ret = rtw_set_wps_assoc_resp(dev, param, p->length);
++			
++	 		break;
++
++		case RTL871X_HOSTAPD_SET_HIDDEN_SSID:
++
++			ret = rtw_set_hidden_ssid(dev, param, p->length);
++
++			break;
++
++		case RTL871X_HOSTAPD_GET_INFO_STA:
++
++			ret = rtw_ioctl_get_sta_data(dev, param, p->length);
++
++			break;
++			
++		case RTL871X_HOSTAPD_SET_MACADDR_ACL:
++
++			ret = rtw_ioctl_set_macaddr_acl(dev, param, p->length);
++
++			break;
++
++		case RTL871X_HOSTAPD_ACL_ADD_STA:
++
++			ret = rtw_ioctl_acl_add_sta(dev, param, p->length);
++
++			break;
++
++		case RTL871X_HOSTAPD_ACL_REMOVE_STA:
++
++			ret = rtw_ioctl_acl_remove_sta(dev, param, p->length);
++
++			break;
++			
++		default:
++			DBG_871X("Unknown hostapd request: %d\n", param->cmd);
++			ret = -EOPNOTSUPP;
++			break;
++		
++	}
++
++	if (ret == 0 && copy_to_user(p->pointer, param, p->length))
++		ret = -EFAULT;
++
++
++	rtw_mfree((u8 *)param, p->length);
++	
++out:
++		
++	return ret;
++	
++}
++#endif
++
++#include <rtw_android.h>
++static int rtw_wx_set_priv(struct net_device *dev,
++				struct iw_request_info *info,
++				union iwreq_data *awrq,
++				char *extra)
++{
++
++#ifdef CONFIG_DEBUG_RTW_WX_SET_PRIV
++	char *ext_dbg;
++#endif
++
++	int ret = 0;
++	int len = 0;
++	char *ext;
++	int i;
++
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct iw_point *dwrq = (struct iw_point*)awrq;
++
++	//RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_notice_, ("+rtw_wx_set_priv\n"));
++	if(dwrq->length == 0)
++		return -EFAULT;
++	len = dwrq->length;
++	if (!(ext = rtw_vmalloc(len)))
++		return -ENOMEM;
++
++	if (copy_from_user(ext, dwrq->pointer, len)) {
++		rtw_vmfree(ext, len);
++		return -EFAULT;
++	}
++
++
++	//RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_notice_,
++	//	 ("rtw_wx_set_priv: %s req=%s\n",
++	//	  dev->name, ext));
++
++	#ifdef CONFIG_DEBUG_RTW_WX_SET_PRIV	
++	if (!(ext_dbg = rtw_vmalloc(len)))
++	{
++		rtw_vmfree(ext, len);
++		return -ENOMEM;
++	}	
++	
++	_rtw_memcpy(ext_dbg, ext, len);
++	#endif
++
++	//added for wps2.0 @20110524
++	if(dwrq->flags == 0x8766 && len > 8)
++	{
++		u32 cp_sz;		
++		struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
++		u8 *probereq_wpsie = ext;
++		int probereq_wpsie_len = len;
++		u8 wps_oui[4]={0x0,0x50,0xf2,0x04};		
++	
++		if((_VENDOR_SPECIFIC_IE_ == probereq_wpsie[0]) &&
++			(_rtw_memcmp(&probereq_wpsie[2], wps_oui, 4) ==_TRUE))
++		{
++			cp_sz = probereq_wpsie_len>MAX_WPS_IE_LEN ? MAX_WPS_IE_LEN:probereq_wpsie_len;
++
++			//_rtw_memcpy(pmlmepriv->probereq_wpsie, probereq_wpsie, cp_sz);
++			//pmlmepriv->probereq_wpsie_len = cp_sz;
++					
++			printk("probe_req_wps_ielen=%d\n", cp_sz);
++						
++			if(pmlmepriv->wps_probe_req_ie)
++			{
++				u32 free_len = pmlmepriv->wps_probe_req_ie_len;
++				pmlmepriv->wps_probe_req_ie_len = 0;
++				rtw_mfree(pmlmepriv->wps_probe_req_ie, free_len);
++				pmlmepriv->wps_probe_req_ie = NULL;			
++			}	
++
++			pmlmepriv->wps_probe_req_ie = rtw_malloc(cp_sz);
++			if ( pmlmepriv->wps_probe_req_ie == NULL) {
++				printk("%s()-%d: rtw_malloc() ERROR!\n", __FUNCTION__, __LINE__);
++				ret =  -EINVAL;
++				goto FREE_EXT;
++			
++			}
++			
++			_rtw_memcpy(pmlmepriv->wps_probe_req_ie, probereq_wpsie, cp_sz);
++			pmlmepriv->wps_probe_req_ie_len = cp_sz;					
++			
++		}	
++		
++		goto FREE_EXT;
++		
++	}
++
++	if(	len >= WEXT_CSCAN_HEADER_SIZE
++		&& _rtw_memcmp(ext, WEXT_CSCAN_HEADER, WEXT_CSCAN_HEADER_SIZE) == _TRUE
++	){
++		ret = rtw_wx_set_scan(dev, info, awrq, ext);
++		goto FREE_EXT;
++	}
++	
++#ifdef CONFIG_ANDROID
++	//DBG_871X("rtw_wx_set_priv: %s req=%s\n", dev->name, ext);
++
++	i = rtw_android_cmdstr_to_num(ext);
++
++	switch(i) {
++		case ANDROID_WIFI_CMD_START :
++			indicate_wx_custom_event(padapter, "START");
++			break;
++		case ANDROID_WIFI_CMD_STOP :
++			indicate_wx_custom_event(padapter, "STOP");
++			break;
++		case ANDROID_WIFI_CMD_RSSI :
++			{
++				struct	mlme_priv	*pmlmepriv = &(padapter->mlmepriv);	
++				struct	wlan_network	*pcur_network = &pmlmepriv->cur_network;
++
++				if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) {
++					sprintf(ext, "%s rssi %d", pcur_network->network.Ssid.Ssid, padapter->recvpriv.rssi);
++				} else {
++					sprintf(ext, "OK");
++				}
++			}
++			break;
++		case ANDROID_WIFI_CMD_LINKSPEED :
++			{
++				u16 mbps = rtw_get_cur_max_rate(padapter)/10;
++				sprintf(ext, "LINKSPEED %d", mbps);
++			}
++			break;
++		case ANDROID_WIFI_CMD_MACADDR :
++			sprintf(ext, "MACADDR = " MAC_FMT, MAC_ARG(dev->dev_addr));
++			break;
++		case ANDROID_WIFI_CMD_SCAN_ACTIVE :
++			{
++				//rtw_set_scan_mode(padapter, SCAN_ACTIVE);
++				sprintf(ext, "OK");
++			}
++			break;
++		case ANDROID_WIFI_CMD_SCAN_PASSIVE :
++			{
++				//rtw_set_scan_mode(padapter, SCAN_PASSIVE);
++				sprintf(ext, "OK");
++			}
++			break;
++
++		case ANDROID_WIFI_CMD_COUNTRY :
++			{
++				char country_code[10];
++				sscanf(ext, "%*s %s", country_code);
++				rtw_set_country(padapter, country_code);
++				sprintf(ext, "OK");
++			}
++			break;
++		default :
++			#ifdef  CONFIG_DEBUG_RTW_WX_SET_PRIV
++			DBG_871X("%s: %s unknowned req=%s\n", __FUNCTION__,
++				dev->name, ext_dbg);
++			#endif
++
++			sprintf(ext, "OK");
++		
++	}
++
++	if (copy_to_user(dwrq->pointer, ext, min(dwrq->length, (u16)(strlen(ext)+1)) ) )
++		ret = -EFAULT;
++
++	#ifdef CONFIG_DEBUG_RTW_WX_SET_PRIV
++	DBG_871X("%s: %s req=%s rep=%s dwrq->length=%d, strlen(ext)+1=%d\n", __FUNCTION__,
++		dev->name, ext_dbg ,ext, dwrq->length, (u16)(strlen(ext)+1));
++	#endif
++#endif //end of CONFIG_ANDROID
++
++
++FREE_EXT:
++
++	rtw_vmfree(ext, len);
++	#ifdef CONFIG_DEBUG_RTW_WX_SET_PRIV
++	rtw_vmfree(ext_dbg, len);
++	#endif
++
++	//DBG_871X("rtw_wx_set_priv: (SIOCSIWPRIV) %s ret=%d\n", 
++	//		dev->name, ret);
++
++	return ret;
++	
++}
++
++static int rtw_mp_efuse_get(struct net_device *dev,
++			struct iw_request_info *info,
++			union iwreq_data *wdata, char *extra)
++{
++	struct iw_point *wrqu = (struct iw_point *)wdata;
++	PADAPTER padapter = rtw_netdev_priv(dev);
++	struct mp_priv *pmp_priv;	
++	
++	int i,j =0;
++	u8 data[EFUSE_MAP_SIZE];
++	u8 rawdata[EFUSE_MAX_SIZE];
++	u16 mapLen=0;
++	char *pch, *ptmp, *token, *tmp[3]={0x00,0x00,0x00};
++	u16 addr = 0, cnts = 0, max_available_size = 0,raw_cursize = 0 ,raw_maxsize = 0;
++	
++	_rtw_memset(data, '\0', sizeof(data));
++	_rtw_memset(rawdata, '\0', sizeof(rawdata));
++	
++	if (copy_from_user(extra, wrqu->pointer, wrqu->length))
++		return -EFAULT;
++
++	pch = extra;
++	DBG_871X("%s: in=%s\n", __func__, extra);
++	
++	i=0;
++	//mac 16 "00e04c871200" rmap,00,2
++	while ( (token = strsep (&pch,",") )!=NULL )
++	{
++			if(i>2) break;
++			tmp[i] = token; 	  
++			i++;
++	}
++	
++	if ( strcmp(tmp[0],"realmap") == 0 ) {
++		
++		DBG_871X("strcmp OK =	%s \n" ,tmp[0]);
++
++		mapLen = EFUSE_MAP_SIZE;
++		 
++		if (rtw_efuse_map_read(padapter, 0, mapLen, data) == _SUCCESS){
++			DBG_871X("\t  rtw_efuse_map_read \n"); 
++		}else {
++			DBG_871X("\t  rtw_efuse_map_read : Fail \n");
++			return -EFAULT;
++		} 
++		_rtw_memset(extra, '\0', sizeof(extra));
++		DBG_871X("\tOFFSET\tVALUE(hex)\n");
++		sprintf(extra, "%s \n", extra);
++		for ( i = 0; i < EFUSE_MAP_SIZE; i += 16 )
++		{
++			DBG_871X("\t0x%02x\t", i);
++			sprintf(extra, "%s \t0x%02x\t", extra,i);
++			for (j = 0; j < 8; j++)
++			{	  
++				DBG_871X("%02X ", data[i+j]);
++				sprintf(extra, "%s %02X", extra, data[i+j]);
++			}
++			DBG_871X("\t");
++			sprintf(extra,"%s\t",extra);
++			for (; j < 16; j++){
++				DBG_871X("%02X ", data[i+j]);
++				sprintf(extra, "%s %02X", extra, data[i+j]);
++			}
++			DBG_871X("\n");
++			sprintf(extra,"%s\n",extra);	
++		}
++		DBG_871X("\n");
++		wrqu->length = strlen(extra);
++	
++		return 0;
++	}
++	else if ( strcmp(tmp[0],"rmap") == 0 ) {
++		if ( tmp[1]==NULL || tmp[2]==NULL ) return	-EINVAL;
++		// rmap addr cnts
++		addr = simple_strtoul(tmp[1], &ptmp, 16);
++
++		DBG_871X("addr = %x \n" ,addr);
++
++		cnts=simple_strtoul(tmp[2], &ptmp,10);
++		if(cnts==0) return -EINVAL;
++
++		DBG_871X("cnts = %d \n" ,cnts);
++		//_rtw_memset(extra, '\0', wrqu->data.length);
++
++		EFUSE_GetEfuseDefinition(padapter, EFUSE_WIFI, TYPE_AVAILABLE_EFUSE_BYTES_TOTAL, (PVOID)&max_available_size, _FALSE);
++		if ((addr + cnts) > max_available_size) {
++			DBG_871X("(addr + cnts parameter error \n");
++			return -EFAULT;
++		}
++				
++		if (rtw_efuse_map_read(padapter, addr, cnts, data) == _FAIL) 
++		{
++			DBG_871X("rtw_efuse_access error \n"); 		
++		}
++		else{
++			DBG_871X("rtw_efuse_access ok \n");
++		}	
++
++		_rtw_memset(extra, '\0', sizeof(extra));	 
++		for ( i = 0; i < cnts; i ++) {
++			DBG_871X("0x%02x", data[i]);
++			sprintf(extra, "%s 0x%02X", extra, data[i]);
++			DBG_871X(" ");
++			sprintf(extra,"%s ",extra);
++		}
++
++		wrqu->length = strlen(extra)+1;
++
++		DBG_871X("extra = %s ", extra);
++
++		return 0;	
++	}
++	else if ( strcmp(tmp[0],"realraw") == 0 ) {
++		addr=0;
++		mapLen = EFUSE_MAX_SIZE;
++
++		if (rtw_efuse_access(padapter, _FALSE, addr, mapLen, rawdata) == _FAIL)
++		{
++			DBG_871X("\t  rtw_efuse_map_read : Fail \n");
++			return -EFAULT;
++		} else
++		{
++			DBG_871X("\t  rtw_efuse_access raw ok \n");	
++		}
++				
++		_rtw_memset(extra, '\0', sizeof(extra));
++		for ( i=0; i<mapLen; i++ ) {
++			DBG_871X(" %02x", rawdata[i]);
++			sprintf(extra, "%s %02x", extra, rawdata[i] );
++
++			if ((i & 0xF) == 0xF){ 
++				DBG_871X("\n\t");
++				sprintf(extra, "%s\n\t", extra);
++			}
++			else if ((i & 0x7) == 0x7){ 
++				DBG_871X("\t");
++				sprintf(extra, "%s\t", extra);
++			}
++		}
++		wrqu->length = strlen(extra);
++		return 0;
++	}
++	else if ( strcmp(tmp[0],"mac") == 0 ) {
++		if ( tmp[1]==NULL || tmp[2]==NULL ) return	-EINVAL;
++		#ifdef CONFIG_RTL8192C
++		addr = 0x16;
++		cnts = 6;
++		#endif
++		#ifdef CONFIG_RTL8192D
++		addr = 0x19;
++		cnts = 6;
++		#endif
++		EFUSE_GetEfuseDefinition(padapter, EFUSE_WIFI, TYPE_AVAILABLE_EFUSE_BYTES_TOTAL, (PVOID)&max_available_size, _FALSE);
++		if ((addr + mapLen) > max_available_size) {
++			DBG_871X("(addr + cnts parameter error \n");
++			return -EFAULT;
++		}
++		if (rtw_efuse_map_read(padapter, addr, cnts, data) == _FAIL)
++		{
++			DBG_871X("rtw_efuse_access error \n"); 		
++		}
++		else{
++			DBG_871X("rtw_efuse_access ok \n");
++		}	
++		_rtw_memset(extra, '\0', sizeof(extra));		 
++		for ( i = 0; i < cnts; i ++) {
++			DBG_871X("0x%02x", data[i]);
++			sprintf(extra, "%s 0x%02X", extra, data[i+j]);
++			DBG_871X(" ");
++			sprintf(extra,"%s ",extra);
++		}
++		wrqu->length = strlen(extra);
++		return 0;
++	}
++	else if ( strcmp(tmp[0],"vidpid") == 0 ) {
++		if ( tmp[1]==NULL || tmp[2]==NULL ) return	-EINVAL;
++		#ifdef CONFIG_RTL8192C
++		addr=0x0a;
++		#endif
++		#ifdef CONFIG_RTL8192D
++		addr = 0x0c;
++		#endif
++		cnts = 4;
++		EFUSE_GetEfuseDefinition(padapter, EFUSE_WIFI, TYPE_AVAILABLE_EFUSE_BYTES_TOTAL, (PVOID)&max_available_size, _FALSE);
++		if ((addr + mapLen) > max_available_size) {
++			DBG_871X("(addr + cnts parameter error \n");
++			return -EFAULT;
++		}
++		if (rtw_efuse_map_read(padapter, addr, cnts, data) == _FAIL) 
++		{
++			DBG_871X("rtw_efuse_access error \n"); 		
++		}
++		else{
++			DBG_871X("rtw_efuse_access ok \n");
++		}	
++		_rtw_memset(extra, '\0', sizeof(extra));		 
++		for ( i = 0; i < cnts; i ++) {
++			DBG_871X("0x%02x", data[i]);
++			sprintf(extra, "%s 0x%02X", extra, data[i+j]);
++			DBG_871X(" ");
++			sprintf(extra,"%s ",extra);
++		}
++		wrqu->length = strlen(extra);
++		return 0;
++	}
++	else if ( strcmp(tmp[0],"ableraw") == 0 ) {
++		efuse_GetCurrentSize(padapter,&raw_cursize);
++		raw_maxsize = efuse_GetMaxSize(padapter);
++		sprintf(extra, "%s : [ available raw size] = %d",extra,raw_maxsize-raw_cursize);
++		wrqu->length = strlen(extra);
++
++		return 0;
++	}else
++	{
++		 sprintf(extra, "%s : Command not found\n",extra);
++		  wrqu->length = strlen(extra);
++		  return 0;
++	}
++	
++	return 0;
++}
++
++static int rtw_mp_efuse_set(struct net_device *dev,
++			struct iw_request_info *info,
++			union iwreq_data *wdata, char *extra)
++{
++	struct iw_point *wrqu = (struct iw_point *)wdata;
++	PADAPTER padapter = rtw_netdev_priv(dev);
++	
++	u8 buffer[40];
++	u32 i,jj,kk;
++	u8 setdata[EFUSE_MAP_SIZE];
++	u8 setrawdata[EFUSE_MAX_SIZE];
++	char *pch, *ptmp, *token, *edata,*tmp[3]={0x00,0x00,0x00};
++
++	u16 addr = 0, max_available_size = 0;
++	u32  cnts = 0;
++	
++	pch = extra;
++	DBG_871X("%s: in=%s\n", __func__, extra);
++	
++	i=0;
++	while ( (token = strsep (&pch,",") )!=NULL )
++	{
++		if(i>2) break;
++		tmp[i] = token;
++		i++;
++	}
++
++	// tmp[0],[1],[2]
++	// wmap,addr,00e04c871200
++	if ( strcmp(tmp[0],"wmap") == 0 ) {
++		 if ( tmp[1]==NULL || tmp[2]==NULL ) return 	-EINVAL;
++			if ( ! strlen( tmp[2] )/2 > 1 ) return -EFAULT; 			
++				  
++			addr = simple_strtoul( tmp[1], &ptmp, 16 );
++			addr = addr & 0xFF;
++			DBG_871X("addr = %x \n" ,addr);
++					
++			cnts = strlen( tmp[2] )/2;	
++			if ( cnts == 0) return -EFAULT;
++					
++			DBG_871X("cnts = %d \n" ,cnts);
++			DBG_871X("target data = %s \n" ,tmp[2]);
++					
++			for( jj = 0, kk = 0; jj < cnts; jj++, kk += 2 )
++			{
++				setdata[jj] = key_2char2num( tmp[2][kk], tmp[2][kk+ 1] );
++			}
++	
++			EFUSE_GetEfuseDefinition(padapter, EFUSE_WIFI, TYPE_AVAILABLE_EFUSE_BYTES_TOTAL, (PVOID)&max_available_size, _FALSE);
++			
++			if ((addr + cnts) > max_available_size) {
++						DBG_871X("parameter error \n");
++						return -EFAULT;
++			}	
++			if (rtw_efuse_map_write(padapter, addr, cnts, setdata) == _FAIL) {			
++					DBG_871X("rtw_efuse_map_write error \n");
++					return -EFAULT;
++			} else
++			   DBG_871X("rtw_efuse_map_write ok \n");
++		
++		return 0;
++	}
++	else if ( strcmp(tmp[0],"wraw") == 0 ) {
++			 if ( tmp[1]==NULL || tmp[2]==NULL ) return 	-EINVAL;
++			 if ( ! strlen( tmp[2] )/2 > 1 ) return -EFAULT;			 
++			addr = simple_strtoul( tmp[1], &ptmp, 16 );
++			addr = addr & 0xFF;
++			DBG_871X("addr = %x \n" ,addr);
++				
++			cnts=strlen( tmp[2] )/2;
++			if ( cnts == 0) return -EFAULT;
++
++			DBG_871X(" cnts = %d \n" ,cnts );		
++			DBG_871X("target data = %s \n" ,tmp[2] );
++			
++			for( jj = 0, kk = 0; jj < cnts; jj++, kk += 2 )
++			{
++					setrawdata[jj] = key_2char2num( tmp[2][kk], tmp[2][kk+ 1] );
++			}
++					
++			if ( rtw_efuse_access( padapter, _TRUE, addr, cnts, setrawdata ) == _FAIL ){
++					DBG_871X("\t  rtw_efuse_map_read : Fail \n");
++						return -EFAULT;
++			} else
++			  DBG_871X("\t  rtw_efuse_access raw ok \n");	
++			
++					return 0;
++		}
++	else if ( strcmp(tmp[0],"mac") == 0 ) { 
++			 if ( tmp[1]==NULL || tmp[2]==NULL ) return 	-EINVAL;
++			//mac,00e04c871200
++			#ifdef CONFIG_RTL8192C
++				addr = 0x16;
++			#endif
++			#ifdef CONFIG_RTL8192D
++				addr = 0x19;
++			#endif
++				cnts = strlen( tmp[1] )/2;
++				if ( cnts == 0) return -EFAULT;
++				if ( cnts > 6 ){
++						DBG_871X("error data for mac addr = %s \n" ,tmp[1]);
++						return -EFAULT;
++				}
++				
++				DBG_871X("target data = %s \n" ,tmp[1]);
++				
++				for( jj = 0, kk = 0; jj < cnts; jj++, kk += 2 )
++				{
++					setdata[jj] = key_2char2num(tmp[1][kk], tmp[1][kk+ 1]);
++				}
++				
++				EFUSE_GetEfuseDefinition(padapter, EFUSE_WIFI, TYPE_AVAILABLE_EFUSE_BYTES_TOTAL, (PVOID)&max_available_size, _FALSE);
++		
++				if ((addr + cnts) > max_available_size) {
++						DBG_871X("parameter error \n");
++						return -EFAULT;
++					}	
++				if ( rtw_efuse_map_write(padapter, addr, cnts, setdata) == _FAIL ) {
++					DBG_871X("rtw_efuse_map_write error \n");
++					return -EFAULT;
++				} else
++					DBG_871X("rtw_efuse_map_write ok \n");
++				
++			return 0;
++		}
++		else if ( strcmp(tmp[0],"vidpid") == 0 ) { 
++			 if ( tmp[1]==NULL || tmp[2]==NULL ) return 	-EINVAL;
++				// pidvid,da0b7881
++				#ifdef CONFIG_RTL8192C
++					   addr=0x0a;
++				#endif
++				#ifdef CONFIG_RTL8192D
++					addr = 0x0c;
++				#endif
++				
++				cnts=strlen( tmp[1] )/2;
++				if ( cnts == 0) return -EFAULT;
++				DBG_871X("target data = %s \n" ,tmp[1]);
++				
++				for( jj = 0, kk = 0; jj < cnts; jj++, kk += 2 )
++				{
++					setdata[jj] = key_2char2num(tmp[1][kk], tmp[1][kk+ 1]);
++				}
++
++				EFUSE_GetEfuseDefinition(padapter, EFUSE_WIFI, TYPE_AVAILABLE_EFUSE_BYTES_TOTAL, (PVOID)&max_available_size, _FALSE);
++				
++				if ((addr + cnts) > max_available_size) {
++						DBG_871X("parameter error \n");
++						return -EFAULT;
++					}	
++				
++				if ( rtw_efuse_map_write(padapter, addr, cnts, setdata) == _FAIL ) {
++					DBG_871X("rtw_efuse_map_write error \n");
++					return -EFAULT;
++				} else
++					DBG_871X("rtw_efuse_map_write ok \n");
++			
++				return 0;
++		}
++		else{
++				 DBG_871X("Command not found\n");
++			   return 0;
++		}
++		
++	  return 0;
++}
++
++
++
++#if defined(CONFIG_MP_INCLUDED) && defined(CONFIG_MP_IWPRIV_SUPPORT)
++
++/*
++ * Input Format: %s,%d,%d
++ *	%s is width, could be
++ *		"b" for 1 byte
++ *		"w" for WORD (2 bytes)
++ *		"dw" for DWORD (4 bytes)
++ *	1st %d is address(offset)
++ *	2st %d is data to write
++ */
++static int rtw_mp_write_reg(struct net_device *dev,
++			struct iw_request_info *info,
++			struct iw_point *wrqu, char *extra)
++{
++	char *pch, *pnext, *ptmp;
++	char *width_str;
++	char width;
++	u32 addr, data;
++	int ret;
++	PADAPTER padapter = rtw_netdev_priv(dev);
++
++
++	pch = extra;
++	pnext = strpbrk(pch, " ,.-");
++	if (pnext == NULL) return -EINVAL;
++	*pnext = 0;
++	width_str = pch;
++
++	pch = pnext + 1;
++	pnext = strpbrk(pch, " ,.-");
++	if (pnext == NULL) return -EINVAL;
++	*pnext = 0;
++	addr = simple_strtoul(pch, &ptmp, 16);
++	if (addr > 0x3FFF) return -EINVAL;
++
++	pch = pnext + 1;
++	if ((pch - extra) >= wrqu->length) return -EINVAL;
++	data = simple_strtoul(pch, &ptmp, 16);
++
++	ret = 0;
++	width = width_str[0];
++	switch (width) {
++		case 'b':
++			// 1 byte
++			if (data > 0xFF) {
++				ret = -EINVAL;
++				break;
++			}
++			rtw_write8(padapter, addr, data);
++			break;
++		case 'w':
++			// 2 bytes
++			if (data > 0xFFFF) {
++				ret = -EINVAL;
++				break;
++			}
++			rtw_write16(padapter, addr, data);
++			break;
++		case 'd':
++			// 4 bytes
++			rtw_write32(padapter, addr, data);
++			break;
++		default:
++			ret = -EINVAL;
++			break;
++	}
++
++	return ret;
++}
++
++/*
++ * Input Format: %s,%d
++ *	%s is width, could be
++ *		"b" for 1 byte
++ *		"w" for WORD (2 bytes)
++ *		"dw" for DWORD (4 bytes)
++ *	%d is address(offset)
++ *
++ * Return:
++ *	%d for data readed
++ */
++static int rtw_mp_read_reg(struct net_device *dev,
++			struct iw_request_info *info,
++			struct iw_point *wrqu, char *extra)
++{
++	char input[wrqu->length];
++	char *pch, *pnext, *ptmp;
++	char *width_str;
++	char width;
++	char data[20],tmp[20];
++	u32 addr;
++	//u32 *data = (u32*)extra;
++	u32 ret, i=0, j=0, strtout=0;
++	PADAPTER padapter = rtw_netdev_priv(dev);
++
++	if (wrqu->length > 128) return -EFAULT;
++
++	if (copy_from_user(input, wrqu->pointer, wrqu->length))
++		return -EFAULT;
++
++	_rtw_memset(data, 0, 20);
++	_rtw_memset(tmp, 0, 20);
++	_rtw_memset(extra, 0, wrqu->length);
++
++	pch = input;
++	pnext = strpbrk(pch, " ,.-");
++	if (pnext == NULL) return -EINVAL;
++	*pnext = 0;
++	width_str = pch;
++
++	pch = pnext + 1;
++	if ((pch - input) >= wrqu->length) return -EINVAL;
++	
++	addr = simple_strtoul(pch, &ptmp, 16);
++	if (addr > 0x3FFF) return -EINVAL;
++
++	ret = 0;
++	width = width_str[0];
++	switch (width) {
++		case 'b':
++			// 1 byte
++			// *(u8*)data = rtw_read8(padapter, addr);
++			sprintf(extra, "%d\n",  rtw_read8(padapter, addr));
++			wrqu->length = strlen(extra);
++			break;
++		case 'w':
++			// 2 bytes
++			//*(u16*)data = rtw_read16(padapter, addr);
++			sprintf(data, "%04d\n", rtw_read16(padapter, addr));
++			for( i=0 ; i <= strlen(data) ; i++)
++				{
++					  if( i%2==0 )
++					  {
++						   tmp[j]=' ';
++						   j++;
++					  }
++					  if ( data[i] != '\0' )
++					 	 tmp[j] = data[i];
++					 	
++					  	 j++;
++				}
++				pch = tmp;		
++				DBG_871X("pch=%s",pch);
++				
++				while( *pch != '\0' )
++				{
++					pnext = strpbrk(pch, " ");
++					pnext++;
++					if ( *pnext != '\0' )
++					{
++						  strtout = simple_strtoul (pnext , &ptmp, 16);
++						  sprintf( extra, "%s %d" ,extra ,strtout );
++					}
++					else{
++						  break;
++					}
++					pch = pnext;
++				}
++			wrqu->length = 6;
++			break;
++		case 'd':
++			// 4 bytes
++			//*data = rtw_read32(padapter, addr);
++			sprintf(data, "%08x", rtw_read32(padapter, addr));
++				//add read data format blank
++				for( i=0 ; i <= strlen(data) ; i++)
++				{
++					  if( i%2==0 )
++					  {
++						   tmp[j]=' ';
++						   j++;
++					  }
++					  tmp[j] = data[i];
++					  j++;
++				}
++				pch = tmp;		
++				DBG_871X("pch=%s",pch);
++				
++				while( *pch != '\0' )
++				{
++					pnext = strpbrk(pch, " ");
++					pnext++;
++					if ( *pnext != '\0' )
++					{
++						  strtout = simple_strtoul (pnext , &ptmp, 16);
++						  sprintf( extra, "%s %d" ,extra ,strtout );
++					}
++					else{
++			break;
++					}
++					pch = pnext;
++				}
++			wrqu->length = strlen(extra);
++			break;
++			
++		default:
++			wrqu->length = 0;
++			ret = -EINVAL;
++			break;
++			
++	}
++
++	return ret;
++}
++
++/*
++ * Input Format: %d,%x,%x
++ *	%d is RF path, should be smaller than MAX_RF_PATH_NUMS
++ *	1st %x is address(offset)
++ *	2st %x is data to write
++ */
++ static int rtw_mp_write_rf(struct net_device *dev,
++			struct iw_request_info *info,
++			struct iw_point *wrqu, char *extra)
++{			
++/*static int rtw_mp_write_rf(struct net_device *dev,
++			struct iw_request_info *info,
++			union iwreq_data *wrqu, char *extra)
++*/
++	u32 path, addr, data;
++	int ret;
++	PADAPTER padapter = rtw_netdev_priv(dev);
++
++
++	ret = sscanf(extra, "%d,%x,%x", &path, &addr, &data);
++	if (ret < 3) return -EINVAL;
++
++	if (path >= MAX_RF_PATH_NUMS) return -EINVAL;
++	if (addr > 0xFF) return -EINVAL;
++	if (data > 0xFFFFF) return -EINVAL;
++	_rtw_memset(extra, 0, wrqu->length);
++
++	write_rfreg(padapter, path, addr, data);
++
++	sprintf(extra, "write_rf completed \n");
++	
++	return 0;
++}
++
++/*
++ * Input Format: %d,%x
++ *	%d is RF path, should be smaller than MAX_RF_PATH_NUMS
++ *	%x is address(offset)
++ *
++ * Return:
++ *	%d for data readed
++ */
++static int rtw_mp_read_rf(struct net_device *dev,
++			struct iw_request_info *info,
++			struct iw_point *wrqu, char *extra)
++{
++	char input[wrqu->length];
++	char *pch, *pnext, *ptmp;
++	char data[20],tmp[20];
++	//u32 *data = (u32*)extra;
++	u32 path, addr;
++	u32 ret,i=0 ,j=0,strtou=0;
++	PADAPTER padapter = rtw_netdev_priv(dev);
++
++
++	if (wrqu->length > 128) return -EFAULT;
++	if (copy_from_user(input, wrqu->pointer, wrqu->length))
++		return -EFAULT;
++
++	ret = sscanf(input, "%d,%x", &path, &addr);
++	if (ret < 2) return -EINVAL;
++
++	if (path >= MAX_RF_PATH_NUMS) return -EINVAL;
++	if (addr > 0xFF) return -EINVAL;
++
++	_rtw_memset(extra, 0, wrqu->length);
++	
++	//*data = read_rfreg(padapter, path, addr);
++	sprintf(data, "%08x", read_rfreg(padapter, path, addr));
++				//add read data format blank
++				for( i=0 ; i <= strlen(data) ; i++)
++				{
++					  if( i%2==0 )
++					  {
++						   tmp[j]=' ';
++						   j++;
++					  }
++					  tmp[j] = data[i];
++					  j++;
++				}
++				pch = tmp;		
++				DBG_871X("pch=%s",pch);
++				
++				while( *pch != '\0' )
++				{
++					pnext = strpbrk(pch, " ");
++					pnext++;
++					if ( *pnext != '\0' )
++					{
++						  strtou = simple_strtoul (pnext , &ptmp, 16);
++						  sprintf( extra, "%s %d" ,extra ,strtou );
++					}
++					else{
++						  break;
++					}
++					pch = pnext;
++				}
++			wrqu->length = strlen(extra);
++
++	return 0;
++}
++
++static int rtw_mp_start(struct net_device *dev,
++			struct iw_request_info *info,
++			struct iw_point *wrqu, char *extra)
++{
++	u8 val8;
++	PADAPTER padapter = rtw_netdev_priv(dev);
++
++
++	if (padapter->registrypriv.mp_mode == 0)
++		return -EPERM;
++
++	if (padapter->mppriv.mode == MP_OFF) {
++		if (mp_start_test(padapter) == _FAIL)
++			return -EPERM;
++		padapter->mppriv.mode = MP_ON;
++	}
++
++	return 0;
++}
++
++static int rtw_mp_stop(struct net_device *dev,
++			struct iw_request_info *info,
++			struct iw_point *wrqu, char *extra)
++{
++	PADAPTER padapter = rtw_netdev_priv(dev);
++
++
++	if (padapter->mppriv.mode != MP_OFF) {
++		mp_stop_test(padapter);
++		padapter->mppriv.mode = MP_OFF;
++	}
++
++	return 0;
++}
++
++extern int wifirate2_ratetbl_inx(unsigned char rate);
++
++static int rtw_mp_rate(struct net_device *dev,
++			struct iw_request_info *info,
++			struct iw_point *wrqu, char *extra)
++{
++	u32 rate = MPT_RATE_1M;
++	u8 		input[wrqu->length];
++	PADAPTER padapter = rtw_netdev_priv(dev);
++
++	if (copy_from_user(input, wrqu->pointer, wrqu->length))
++			return -EFAULT;
++			
++	rate = rtw_atoi(input);
++	sprintf( extra, "Set data rate to %d" , rate );
++		
++	if(rate <= 0x7f)
++		rate = wifirate2_ratetbl_inx( (u8)rate);	
++	else 
++		rate =(rate-0x80+MPT_RATE_MCS0);
++
++	//DBG_871X("%s: rate=%d\n", __func__, rate);
++	
++	if (rate >= MPT_RATE_LAST )	
++	return -EINVAL;
++
++	padapter->mppriv.rateidx = rate;
++	Hal_SetDataRate(padapter);
++
++	wrqu->length = strlen(extra) + 1;
++	return 0;
++}
++
++static int rtw_mp_channel(struct net_device *dev,
++			struct iw_request_info *info,
++			struct iw_point *wrqu, char *extra)
++{
++
++	PADAPTER padapter = rtw_netdev_priv(dev);
++	u8 		input[wrqu->length];
++	u32 	channel = 1;
++
++	if (copy_from_user(input, wrqu->pointer, wrqu->length))
++			return -EFAULT;
++	
++	channel = rtw_atoi(input);
++	//DBG_871X("%s: channel=%d\n", __func__, channel);
++	sprintf( extra, "Change channel %d to channel %d", padapter->mppriv.channel , channel );
++
++	padapter->mppriv.channel = channel;
++	Hal_SetChannel(padapter);
++
++	wrqu->length = strlen(extra) + 1;
++	return 0;
++}
++
++static int rtw_mp_bandwidth(struct net_device *dev,
++			struct iw_request_info *info,
++			struct iw_point *wrqu, char *extra)
++{
++	u32 bandwidth=0, sg=0;
++	//u8 buffer[40];
++	PADAPTER padapter = rtw_netdev_priv(dev);
++	//if (copy_from_user(buffer, (void*)wrqu->data.pointer, wrqu->data.length))
++    //            return -EFAULT;
++                
++	//DBG_871X("%s:iwpriv in=%s\n", __func__, extra);
++	
++	sscanf(extra, "40M=%d,shortGI=%d", &bandwidth, &sg);
++	
++	if (bandwidth != HT_CHANNEL_WIDTH_40)
++		bandwidth = HT_CHANNEL_WIDTH_20;
++
++	//DBG_871X("%s: bw=%d sg=%d \n", __func__, bandwidth , sg);
++	
++	padapter->mppriv.bandwidth = (u8)bandwidth;
++	padapter->mppriv.preamble = sg;
++	
++	SetBandwidth(padapter);
++
++	return 0;
++}
++
++static int rtw_mp_txpower(struct net_device *dev,
++			struct iw_request_info *info,
++			struct iw_point *wrqu, char *extra)
++{
++	u32		idx_a=0,idx_b=0;
++	u8 		input[wrqu->length];
++
++	PADAPTER padapter = rtw_netdev_priv(dev);
++
++	if (copy_from_user(input, wrqu->pointer, wrqu->length))
++			return -EFAULT;
++
++	sscanf(input,"patha=%d,pathb=%d",&idx_a,&idx_b);
++	//DBG_871X("%s: tx_pwr_idx_a=%x b=%x\n", __func__, idx_a, idx_b);
++
++	sprintf( extra, "Set power level path_A:%d path_B:%d", idx_a , idx_b );
++	padapter->mppriv.txpoweridx = (u8)idx_a;
++	padapter->mppriv.txpoweridx_b = (u8)idx_b;
++	
++	Hal_SetAntennaPathPower(padapter);
++	
++	wrqu->length = strlen(extra) + 1;
++	return 0;
++}
++
++static int rtw_mp_ant_tx(struct net_device *dev,
++			struct iw_request_info *info,
++			struct iw_point *wrqu, char *extra)
++{
++	u8 i;
++	u8 		input[wrqu->length];
++	u16 antenna = 0;
++	PADAPTER padapter = rtw_netdev_priv(dev);
++
++	if (copy_from_user(input, wrqu->pointer, wrqu->length))
++			return -EFAULT;
++			
++	//DBG_871X("%s: input=%s\n", __func__, input);	
++	
++	sprintf( extra, "switch Tx antenna to %s", input );
++	
++	for (i=0; i < strlen(input); i++)
++	{
++		switch(input[i])
++			{
++				case 'a' :
++								antenna|=ANTENNA_A;
++								break;
++				case 'b':
++								antenna|=ANTENNA_B;
++								break;
++			}
++	}
++	//antenna |= BIT(extra[i]-'a');
++	//DBG_871X("%s: antenna=0x%x\n", __func__, antenna);		
++	padapter->mppriv.antenna_tx = antenna;
++	//DBG_871X("%s:mppriv.antenna_rx=%d\n", __func__, padapter->mppriv.antenna_tx);
++	
++	Hal_SetAntenna(padapter);
++
++	wrqu->length = strlen(extra) + 1;
++	return 0;
++}
++
++static int rtw_mp_ant_rx(struct net_device *dev,
++			struct iw_request_info *info,
++			struct iw_point *wrqu, char *extra)
++{
++	u8 i;
++	u16 antenna = 0;
++	u8 		input[wrqu->length];
++	PADAPTER padapter = rtw_netdev_priv(dev);
++
++	if (copy_from_user(input, wrqu->pointer, wrqu->length))
++			return -EFAULT;
++	//DBG_871X("%s: input=%s\n", __func__, input);
++	_rtw_memset(extra, 0, wrqu->length);
++	
++	sprintf( extra, "switch Rx antenna to %s", input );
++	
++	for (i=0; i < strlen(input); i++) {
++	
++	switch( input[i] )
++			{
++				case 'a' :
++								antenna|=ANTENNA_A;
++								break;
++				case 'b':
++								antenna|=ANTENNA_B;
++								break;
++			}
++	}
++	
++	//DBG_871X("%s: antenna=0x%x\n", __func__, antenna);		
++	padapter->mppriv.antenna_rx = antenna;
++	//DBG_871X("%s:mppriv.antenna_rx=%d\n", __func__, padapter->mppriv.antenna_rx);
++	Hal_SetAntenna(padapter);
++	wrqu->length = strlen(extra);
++	
++	return 0;
++}
++
++static int rtw_mp_ctx(struct net_device *dev,
++			struct iw_request_info *info,
++			struct iw_point *wrqu, char *extra)
++{
++	u32 pkTx = 1, countPkTx = 1, cotuTx = 1, CarrSprTx = 1, scTx = 1, sgleTx = 1, stop = 1;
++	u32 bStartTest = 1;
++	u32 count = 0;
++	struct mp_priv *pmp_priv;
++	struct pkt_attrib *pattrib;
++
++	PADAPTER padapter = rtw_netdev_priv(dev);
++
++
++	pmp_priv = &padapter->mppriv;
++
++	if (copy_from_user(extra, wrqu->pointer, wrqu->length))
++			return -EFAULT;
++			
++	DBG_871X("%s: in=%s\n", __func__, extra);
++
++	countPkTx = strncmp(extra, "count=", 5); // strncmp TRUE is 0
++	cotuTx = strncmp(extra, "background", 20);
++	CarrSprTx = strncmp(extra, "background,cs", 20);
++	scTx = strncmp(extra, "background,sc", 20);
++	sgleTx = strncmp(extra, "background,stone", 20);
++	pkTx = strncmp(extra, "background,pkt", 20);
++	stop = strncmp(extra, "stop", 5);
++	sscanf(extra, "count=%d,pkt", &count);
++	
++	//DBG_871X("%s: count=%d countPkTx=%d cotuTx=%d CarrSprTx=%d scTx=%d sgleTx=%d pkTx=%d stop=%d\n", __func__, count, countPkTx, cotuTx, CarrSprTx, pkTx, sgleTx, scTx, stop);
++	_rtw_memset(extra, '\0', sizeof(extra));
++	
++	if (stop == 0) {
++		bStartTest = 0; // To set Stop
++		pmp_priv->tx.stop = 1;
++		sprintf( extra, "Stop continuous Tx");
++	} else {
++		bStartTest = 1;
++		if (pmp_priv->mode != MP_ON) {
++			if (pmp_priv->tx.stop != 1) {
++				DBG_871X("%s: MP_MODE != ON %d\n", __func__, pmp_priv->mode);
++				return  -EFAULT;
++			}
++		}
++	}
++
++	if (pkTx == 0 || countPkTx == 0)
++		pmp_priv->mode = MP_PACKET_TX;
++	if (sgleTx == 0)
++		pmp_priv->mode = MP_SINGLE_TONE_TX;
++	if (cotuTx == 0)
++		pmp_priv->mode = MP_CONTINUOUS_TX;
++	if (CarrSprTx == 0)
++		pmp_priv->mode = MP_CARRIER_SUPPRISSION_TX;
++	if (scTx == 0)
++		pmp_priv->mode = MP_SINGLE_CARRIER_TX;
++
++	switch (pmp_priv->mode)
++	{
++		case MP_PACKET_TX:
++		
++			//DBG_871X("%s:pkTx %d\n", __func__,bStartTest);
++			if (bStartTest == 0)
++			{
++				pmp_priv->tx.stop = 1;
++				pmp_priv->mode = MP_ON;
++				sprintf( extra, "Stop continuous Tx");
++			}
++			else if (pmp_priv->tx.stop == 1)
++			{
++				sprintf( extra, "Start continuous DA=ffffffffffff len=1500 count=%u,\n",count);
++				//DBG_871X("%s:countPkTx %d\n", __func__,count);
++				pmp_priv->tx.stop = 0;
++				pmp_priv->tx.count = count;
++				pmp_priv->tx.payload = 2;
++				pattrib = &pmp_priv->tx.attrib;
++				pattrib->pktlen = 1460;
++				_rtw_memset(pattrib->dst, 0xFF, ETH_ALEN);
++				SetPacketTx(padapter);
++			} 
++			else {
++				//DBG_871X("%s: pkTx not stop\n", __func__);
++				return -EFAULT;
++			}
++				wrqu->length = strlen(extra);
++				return 0;
++
++		case MP_SINGLE_TONE_TX:
++			//DBG_871X("%s: sgleTx %d \n", __func__, bStartTest);
++			if (bStartTest != 0){
++				sprintf( extra, "Start continuous DA=ffffffffffff len=1500 \n infinite=yes.");
++            		
++           		 }
++			Hal_SetSingleToneTx(padapter, (u8)bStartTest);
++			break;
++
++		case MP_CONTINUOUS_TX:
++			DBG_871X("%s: cotuTx %d\n", __func__, bStartTest);
++			if (bStartTest != 0){
++				sprintf( extra, "Start continuous DA=ffffffffffff len=1500 \n infinite=yes.");
++           		 }
++			 Hal_SetContinuousTx(padapter, (u8)bStartTest);
++			break;
++
++		case MP_CARRIER_SUPPRISSION_TX:
++			//DBG_871X("%s: CarrSprTx %d\n", __func__, bStartTest);
++			if (bStartTest != 0){
++				if( pmp_priv->rateidx <= MPT_RATE_11M ) 
++				{
++					sprintf( extra, "Start continuous DA=ffffffffffff len=1500 \n infinite=yes.");
++				}else
++					sprintf( extra, "Specify carrier suppression but not CCK rate");
++			}
++			Hal_SetCarrierSuppressionTx(padapter, (u8)bStartTest);
++			break;
++
++		case MP_SINGLE_CARRIER_TX:
++			//DBG_871X("%s: scTx %d\n", __func__, bStartTest);
++			if (bStartTest != 0){
++				sprintf( extra, "Start continuous DA=ffffffffffff len=1500 \n infinite=yes.");
++			}
++			Hal_SetSingleCarrierTx(padapter, (u8)bStartTest);
++			break;
++
++		default:
++			//DBG_871X("%s:No Match MP_MODE\n", __func__);
++			sprintf( extra, "Error! Continuous-Tx is not on-going.");
++			return -EFAULT;
++	}
++
++	if (bStartTest) {
++		struct mp_priv *pmp_priv = &padapter->mppriv;
++		if (pmp_priv->tx.stop == 0) {
++			pmp_priv->tx.stop = 1;
++			//DBG_871X("%s: pkt tx is running...\n", __func__);
++			rtw_msleep_os(5);
++		}
++		pmp_priv->tx.stop = 0;
++		pmp_priv->tx.count = 1;
++		SetPacketTx(padapter);
++	} else {
++		pmp_priv->mode = MP_ON;
++	}
++
++	wrqu->length = strlen(extra);
++	return 0;
++}
++
++static int rtw_mp_arx(struct net_device *dev,
++			struct iw_request_info *info,
++			struct iw_point *wrqu, char *extra)
++{
++	u8 bStartRx=0,bStopRx=0;
++	PADAPTER padapter = rtw_netdev_priv(dev);
++	u8 		input[wrqu->length];
++
++	if (copy_from_user(input, wrqu->pointer, wrqu->length))
++			return -EFAULT;
++
++	DBG_871X("%s: %s\n", __func__, input);
++
++	bStartRx = (strncmp(input, "start", 5)==0)?1:0; // strncmp TRUE is 0
++	bStopRx = (strncmp(input, "stop", 5)==0)?1:0; // strncmp TRUE is 0
++	SetPacketRx(padapter, bStartRx);
++
++	if(bStartRx)
++	{
++		sprintf( extra, "start");
++		wrqu->length = strlen(extra) + 1;
++	}
++	else if(bStopRx)
++	{
++		sprintf( extra, "Received packet OK:%d CRC error:%d",padapter->mppriv.rx_pktcount,
++														padapter->mppriv.rx_crcerrpktcount);
++		wrqu->length = strlen(extra) + 1;
++	}
++	
++
++	return 0;
++}
++
++static int rtw_mp_trx_query(struct net_device *dev,
++			struct iw_request_info *info,
++			struct iw_point *wrqu, char *extra)
++{
++	u32 txok,txfail,rxok,rxfail;
++	PADAPTER padapter = rtw_netdev_priv(dev);
++	//if (copy_from_user(extra, wrqu->data.pointer, wrqu->data.length))
++	//	return -EFAULT;
++
++	txok=padapter->mppriv.tx.sended;
++	txfail=0;
++	rxok = padapter->mppriv.rx_pktcount;
++	rxfail = padapter->mppriv.rx_crcerrpktcount;
++
++	_rtw_memset(extra, '\0', 128);
++
++	sprintf(extra, "Tx OK:%d, Tx Fail:%d, Rx OK:%d, CRC error:%d ", txok, txfail,rxok,rxfail);
++
++	wrqu->length=strlen(extra)+1;
++
++	return 0;
++}
++
++static int rtw_mp_pwrtrk(struct net_device *dev,
++			struct iw_request_info *info,
++			struct iw_point *wrqu, char *extra)
++{
++	u8 enable;
++	u32 thermal;
++	s32 ret;
++	PADAPTER padapter = rtw_netdev_priv(dev);
++	u8 		input[wrqu->length];
++
++	if (copy_from_user(input, wrqu->pointer, wrqu->length))
++			return -EFAULT;
++
++	_rtw_memset(extra, 0, wrqu->length);
++		
++	enable = 1;
++	if (wrqu->length > 1) { // not empty string
++		if (strncmp(input, "stop", 4) == 0)
++		{	
++			enable = 0;
++			sprintf(extra, "mp tx power tracking stop");
++		}
++		else if (sscanf(input, "ther=%d", &thermal)) {
++				ret = Hal_SetThermalMeter(padapter, (u8)thermal);
++				if (ret == _FAIL) return -EPERM;
++				sprintf(extra, "mp tx power tracking start,target value=%d ok ",thermal);
++		}else	{
++			return -EINVAL;
++		}
++	}
++
++	ret = Hal_SetPowerTracking(padapter, enable);
++	if (ret == _FAIL) return -EPERM;
++	
++	wrqu->length = strlen(extra);
++
++	return 0;
++}
++
++static int rtw_mp_psd(struct net_device *dev,
++			struct iw_request_info *info,
++			struct iw_point *wrqu, char *extra)
++{
++	PADAPTER padapter = rtw_netdev_priv(dev);
++	u8 		input[wrqu->length];
++
++	if (copy_from_user(input, wrqu->pointer, wrqu->length))
++		return -EFAULT;
++	
++	strcpy(extra,input);
++
++	wrqu->length = mp_query_psd(padapter, extra);
++	
++	return 0;
++}
++
++static int rtw_mp_thermal(struct net_device *dev,
++			struct iw_request_info *info,
++			struct iw_point *wrqu, char *extra)
++{
++	u8 val;
++	u16 bwrite=1;
++	#ifdef CONFIG_RTL8192C
++		u16 addr=0x78;
++	#endif
++	#ifdef CONFIG_RTL8192D
++		u16 addr=0xc3;
++	#endif
++	u16 cnt=1;
++	u16 max_available_size=0;
++	PADAPTER padapter = rtw_netdev_priv(dev);	
++
++	if (copy_from_user(extra, wrqu->pointer, wrqu->length))
++		return -EFAULT;
++
++	//DBG_871X("print extra %s \n",extra); 
++	 
++	 bwrite = strncmp(extra, "write", 6); // strncmp TRUE is 0
++	 
++	 Hal_GetThermalMeter(padapter, &val);
++	 
++	 if( bwrite == 0 )	
++	 {
++		 //DBG_871X("to write val:%d",val);
++			EFUSE_GetEfuseDefinition(padapter, EFUSE_WIFI, TYPE_AVAILABLE_EFUSE_BYTES_TOTAL, (PVOID)&max_available_size, _FALSE);
++			if( 2 > max_available_size )
++			{			
++				DBG_871X("no available efuse!\n");
++				return -EFAULT;
++			}	
++			if ( rtw_efuse_map_write(padapter, addr, cnt, &val) == _FAIL )
++			{
++				DBG_871X("rtw_efuse_map_write error \n");			
++				return -EFAULT;
++			} 
++			else
++			{
++				 sprintf(extra, " efuse write ok :%d", val);	
++			}
++	  }
++	  else
++	  {
++			 sprintf(extra, "%d", val);
++	  }
++	wrqu->length = strlen(extra);
++	
++	return 0;
++}
++
++static int rtw_mp_reset_stats(struct net_device *dev,
++			struct iw_request_info *info,
++			struct iw_point *wrqu, char *extra)
++{
++	struct mp_priv *pmp_priv;
++	struct pkt_attrib *pattrib;
++	PADAPTER padapter = rtw_netdev_priv(dev);
++	
++	pmp_priv = &padapter->mppriv;
++	
++	pmp_priv->tx.sended = 0;
++	padapter->mppriv.rx_pktcount = 0;
++	padapter->mppriv.rx_crcerrpktcount = 0;
++
++	return 0;
++}
++
++static int rtw_mp_dump(struct net_device *dev,
++			struct iw_request_info *info,
++			struct iw_point *wrqu, char *extra)
++{
++	struct mp_priv *pmp_priv;
++	struct pkt_attrib *pattrib;
++        u32 value;
++	u8 rf_type,path_nums = 0;
++	u32 i,j=1,path;
++	PADAPTER padapter = rtw_netdev_priv(dev);
++	
++	pmp_priv = &padapter->mppriv;
++
++	
++	//if (copy_from_user(extra, wrqu->data.pointer, wrqu->data.length))
++	//	return -EFAULT;
++	
++	if ( strncmp(extra, "all", 4)==0 )
++	{
++			DBG_871X("\n======= MAC REG =======\n");
++			for ( i=0x0;i<0x300;i+=4 )
++			{	
++				if(j%4==1)	DBG_871X("0x%02x",i);
++				DBG_871X(" 0x%08x ",rtw_read32(padapter,i));		
++				if((j++)%4 == 0)	DBG_871X("\n");	
++			}
++			for( i=0x400;i<0x800;i+=4 )
++			{	
++				if(j%4==1)	DBG_871X("0x%02x",i);
++				DBG_871X(" 0x%08x ",rtw_read32(padapter,i));		
++				if((j++)%4 == 0)	DBG_871X("\n");	
++			}
++			
++			i,j=1;
++			rtw_hal_get_hwreg(padapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type));
++				
++			DBG_871X("\n======= RF REG =======\n");
++			if(( RF_1T2R == rf_type ) ||( RF_1T1R ==rf_type ))	
++				path_nums = 1;
++			else	
++				path_nums = 2;
++				
++			for(path=0;path<path_nums;path++)
++			{
++#ifdef CONFIG_RTL8192D
++			  for (i = 0; i < 0x50; i++)
++#else
++	   		 for (i = 0; i < 0x34; i++)
++#endif
++				{								
++					//value = PHY_QueryRFReg(padapter, (RF90_RADIO_PATH_E)path,i, bMaskDWord);
++					value =rtw_hal_read_rfreg(padapter, path, i, 0xffffffff);
++					if(j%4==1)	DBG_871X("0x%02x ",i);
++					DBG_871X(" 0x%08x ",value);
++					if((j++)%4==0)	DBG_871X("\n");	
++				}	
++			}
++	}
++	return 0;
++}
++
++static int rtw_mp_phypara(struct net_device *dev,
++			struct iw_request_info *info,
++			struct iw_point *wrqu, char *extra)
++{
++
++	PADAPTER padapter = rtw_netdev_priv(dev);
++	char 	input[wrqu->length];
++	u32		valxcap;
++	
++	if (copy_from_user(input, wrqu->pointer, wrqu->length))
++			return -EFAULT;
++	
++	DBG_871X("%s:iwpriv in=%s\n", __func__, input);
++	
++	sscanf(input, "xcap=%d", &valxcap);
++
++	if (!IS_HARDWARE_TYPE_8192D(padapter))
++			return 0;
++#ifdef CONFIG_RTL8192D
++	Hal_ProSetCrystalCap( padapter , valxcap );
++#endif
++
++	sprintf( extra, "Set xcap=%d",valxcap );
++	wrqu->length = strlen(extra) + 1;
++	
++return 0;
++
++}
++
++
++/* update Tx AGC offset */
++static int rtw_mp_antBdiff(struct net_device *dev,
++			struct iw_request_info *info,
++			struct iw_point *wrqu, char *extra)
++{
++
++
++	// MPT_ProSetTxAGCOffset
++	return 0;
++}
++
++
++static int rtw_mp_set(struct net_device *dev,
++			struct iw_request_info *info,
++			union iwreq_data *wdata, char *extra)
++{
++	struct iw_point *wrqu = (struct iw_point *)wdata;
++	u32 subcmd = wrqu->flags;
++	PADAPTER padapter = rtw_netdev_priv(dev);
++
++	if (padapter == NULL)
++	{
++		return -ENETDOWN;
++	}
++
++	//_rtw_memset(extra, 0x00, IW_PRIV_SIZE_MASK);
++
++	if (extra == NULL)
++	{
++		wrqu->length = 0;
++		return -EIO;
++	}
++
++	switch(subcmd)
++	{
++	case WRITE_REG :
++			rtw_mp_write_reg (dev,info,wrqu,extra);
++			 break;
++			 
++	case WRITE_RF:
++			rtw_mp_write_rf (dev,info,wrqu,extra);
++			 break; 
++			 
++	case MP_START:
++			DBG_871X("set case mp_start \n");
++			rtw_mp_start (dev,info,wrqu,extra);
++			 break; 
++			 
++	case MP_STOP:
++			DBG_871X("set case mp_stop \n");
++			rtw_mp_stop (dev,info,wrqu,extra);
++			 break; 
++			 
++	case MP_BANDWIDTH:
++			DBG_871X("set case mp_bandwidth \n");
++			rtw_mp_bandwidth (dev,info,wrqu,extra);
++			break;
++			
++	case MP_RESET_STATS:
++			DBG_871X("set case MP_RESET_STATS \n");
++			rtw_mp_reset_stats	(dev,info,wrqu,extra);
++			break;
++			
++	case EFUSE_SET:
++			DBG_871X("efuse set \n");
++			rtw_mp_efuse_set (dev,info,wdata,extra);
++			break;	
++		 		
++	}
++
++	  
++	return 0;		
++}
++
++
++static int rtw_mp_get(struct net_device *dev,
++			struct iw_request_info *info,
++			union iwreq_data *wdata, char *extra)
++{
++	struct iw_point *wrqu = (struct iw_point *)wdata;
++	u32 subcmd = wrqu->flags;
++	PADAPTER padapter = rtw_netdev_priv(dev);
++
++	//DBG_871X("in mp_get extra= %s \n",extra);
++
++	if (padapter == NULL)
++	{
++		return -ENETDOWN;
++	}
++	if (extra == NULL)
++	{
++		wrqu->length = 0;
++		return -EIO;
++	}
++	
++	switch(subcmd)
++	{
++	case MP_PHYPARA:
++			DBG_871X("mp_get  MP_PHYPARA \n");
++			rtw_mp_phypara(dev,info,wrqu,extra);	
++			break;
++
++	case MP_CHANNEL:
++			DBG_871X("set case mp_channel \n");
++			rtw_mp_channel (dev,info,wrqu,extra);
++			break;
++			
++	case READ_REG:
++			DBG_871X("mp_get  READ_REG \n");
++			rtw_mp_read_reg (dev,info,wrqu,extra);
++			 break; 
++	case READ_RF:
++			DBG_871X("mp_get  READ_RF \n");
++			rtw_mp_read_rf (dev,info,wrqu,extra);
++			break; 
++			
++	case MP_RATE:
++			DBG_871X("set case mp_rate \n");
++			rtw_mp_rate (dev,info,wrqu,extra);
++			break;
++			
++	case MP_TXPOWER:
++			DBG_871X("set case MP_TXPOWER \n");
++			rtw_mp_txpower (dev,info,wrqu,extra);
++			break;
++			
++	case MP_ANT_TX:
++			DBG_871X("set case MP_ANT_TX \n");
++			rtw_mp_ant_tx (dev,info,wrqu,extra);
++			break;
++			
++	case MP_ANT_RX:
++			DBG_871X("set case MP_ANT_RX \n");
++			rtw_mp_ant_rx (dev,info,wrqu,extra);
++			break;
++			
++	case MP_QUERY:
++			DBG_871X("mp_get mp_query MP_QUERY \n");
++			rtw_mp_trx_query(dev,info,wrqu,extra);
++			break;
++					
++	case MP_CTX:
++			DBG_871X("set case MP_CTX \n");
++			rtw_mp_ctx (dev,info,wrqu,extra);
++			break;
++			
++	case MP_ARX:
++			DBG_871X("set case MP_ARX \n");
++			rtw_mp_arx (dev,info,wrqu,extra);
++			break;
++			
++	case EFUSE_GET:
++			DBG_871X("efuse get EFUSE_GET \n");
++			rtw_mp_efuse_get(dev,info,wdata,extra);
++		 break; 
++		 
++	case MP_DUMP:
++			DBG_871X("set case MP_DUMP \n");
++			rtw_mp_dump (dev,info,wrqu,extra);
++		 break; 
++	case MP_PSD:
++			DBG_871X("set case MP_PSD \n");
++			rtw_mp_psd (dev,info,wrqu,extra);
++		 break;
++		 
++	case MP_THER:
++			DBG_871X("set case MP_THER \n");
++			rtw_mp_thermal (dev,info,wrqu,extra);
++		break;
++		
++	case MP_PWRTRK:
++			DBG_871X("set case MP_PWRTRK \n");
++			rtw_mp_pwrtrk (dev,info,wrqu,extra);
++			break;			 
++	}
++
++return 0;	
++}
++
++#endif //#if defined(CONFIG_MP_INCLUDED) && defined(CONFIG_MP_IWPRIV_SUPPORT)
++
++static int rtw_wfd_tdls_enable(struct net_device *dev,
++				struct iw_request_info *info,
++				union iwreq_data *wrqu, char *extra)
++{
++	int ret = 0;
++
++#ifdef CONFIG_TDLS
++#ifdef CONFIG_WFD
++
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++
++	printk( "[%s] %s %d\n", __FUNCTION__, extra, wrqu->data.length -1  );
++
++	if ( extra[ 0 ] == '0' )
++	{
++		padapter->wdinfo.wfd_tdls_enable = 0;
++	}
++	else
++	{
++		padapter->wdinfo.wfd_tdls_enable = 1;
++	}
++
++#endif //CONFIG_WFD
++#endif //CONFIG_TDLS
++	
++	return ret;
++}
++
++static int rtw_tdls_weaksec(struct net_device *dev,
++				struct iw_request_info *info,
++				union iwreq_data *wrqu, char *extra)
++{
++	int ret = 0;
++
++#ifdef CONFIG_TDLS
++
++	u8 i, j;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++
++	DBG_871X( "[%s] %s %d\n", __FUNCTION__, extra, wrqu->data.length -1  );
++
++	if ( extra[ 0 ] == '0' )
++	{
++		padapter->wdinfo.wfd_tdls_weaksec = 0;
++	}
++	else
++	{
++		padapter->wdinfo.wfd_tdls_weaksec = 1;
++	}
++#endif
++	
++	return ret;
++}
++
++
++static int rtw_tdls_enable(struct net_device *dev,
++				struct iw_request_info *info,
++				union iwreq_data *wrqu, char *extra)
++{
++	int ret = 0;
++
++#ifdef CONFIG_TDLS
++
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct tdls_info	*ptdlsinfo = &padapter->tdlsinfo;
++	_irqL	 irqL;
++	_list	*plist, *phead;
++	s32	index;
++	struct sta_info *psta = NULL;
++	struct	sta_priv *pstapriv = &padapter->stapriv;
++	u8 tdls_sta[NUM_STA][ETH_ALEN];
++	u8 empty_hwaddr[ETH_ALEN] = { 0x00 };
++
++	printk( "[%s] %s %d\n", __FUNCTION__, extra, wrqu->data.length -1  );
++
++	_rtw_memset(tdls_sta, 0x00, sizeof(tdls_sta));
++
++	if ( extra[ 0 ] == '0' )
++	{
++		ptdlsinfo->enable = 0;
++
++		if(pstapriv->asoc_sta_count==1)
++			return ret;
++
++		_enter_critical_bh(&pstapriv->sta_hash_lock, &irqL);
++		for(index=0; index< NUM_STA; index++)
++		{
++			phead = &(pstapriv->sta_hash[index]);
++			plist = get_next(phead);
++			
++			while ((rtw_end_of_queue_search(phead, plist)) == _FALSE)
++			{
++				psta = LIST_CONTAINOR(plist, struct sta_info ,hash_list);
++
++				plist = get_next(plist);
++
++				if(psta->tdls_sta_state != TDLS_STATE_NONE)
++				{
++					_rtw_memcpy(tdls_sta[index], psta->hwaddr, ETH_ALEN);
++				}
++			}
++		}
++		_exit_critical_bh(&pstapriv->sta_hash_lock, &irqL);
++
++		for(index=0; index< NUM_STA; index++)
++		{
++			if( !_rtw_memcmp(tdls_sta[index], empty_hwaddr, ETH_ALEN) )
++			{
++				printk("issue tear down to "MAC_FMT"\n", MAC_ARG(tdls_sta[index]));
++				issue_tdls_teardown(padapter, tdls_sta[index]);
++			}
++		}
++		rtw_tdls_cmd(padapter, myid(&(padapter->eeprompriv)), TDLS_RS_RCR);
++		rtw_reset_tdls_info(padapter);
++	}
++	else if ( extra[ 0 ] == '1' )
++	{
++		ptdlsinfo->enable = 1;
++	}
++#endif //CONFIG_TDLS
++	
++	return ret;
++}
++
++static int rtw_tdls_setup(struct net_device *dev,
++				struct iw_request_info *info,
++				union iwreq_data *wrqu, char *extra)
++{
++	int ret = 0;
++
++#ifdef CONFIG_TDLS
++
++	u8 i, j;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	u8 mac_addr[ETH_ALEN];
++
++#ifdef CONFIG_WFD
++	struct wifidirect_info *pwdinfo= &(padapter->wdinfo);
++#endif // CONFIG_WFD
++
++	printk( "[%s] %s %d\n", __FUNCTION__, extra, wrqu->data.length -1  );
++
++	for( i=0, j=0 ; i < ETH_ALEN; i++, j+=3 ){
++		mac_addr[i]=key_2char2num(*(extra+j), *(extra+j+1));
++	}
++
++#ifdef CONFIG_WFD
++	if ( _AES_ != padapter->securitypriv.dot11PrivacyAlgrthm )
++	{
++		//	Weak Security situation with AP.
++		if ( 0 == pwdinfo->wfd_tdls_weaksec )
++		{
++			//	Can't send the tdls setup request out!!
++			DBG_871X( "[%s] Current link is not AES, SKIP sending the tdls setup request!!\n", __FUNCTION__ );
++		}
++		else
++		{
++			issue_tdls_setup_req(padapter, mac_addr);
++		}
++	}
++	else
++#endif // CONFIG_WFD
++	{
++		issue_tdls_setup_req(padapter, mac_addr);
++	}
++#endif
++	
++	return ret;
++}
++
++static int rtw_tdls_teardown(struct net_device *dev,
++				struct iw_request_info *info,
++				union iwreq_data *wrqu, char *extra)
++{
++	int ret = 0;
++
++#ifdef CONFIG_TDLS
++
++	u8 i,j;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct sta_info *ptdls_sta = NULL;
++	u8 mac_addr[ETH_ALEN];
++
++	printk( "[%s] %s %d\n", __FUNCTION__, extra, wrqu->data.length -1  );
++
++	for( i=0, j=0 ; i < ETH_ALEN; i++, j+=3 ){
++		mac_addr[i]=key_2char2num(*(extra+j), *(extra+j+1));
++	}
++
++	ptdls_sta = rtw_get_stainfo( &(padapter->stapriv), mac_addr);
++	
++	if(ptdls_sta != NULL)
++	{
++		ptdls_sta->stat_code = _RSON_TDLS_TEAR_UN_RSN_;
++		issue_tdls_teardown(padapter, mac_addr);
++	}
++
++#endif //CONFIG_TDLS
++	
++	return ret;
++}
++
++static int rtw_tdls_discovery(struct net_device *dev,
++				struct iw_request_info *info,
++				union iwreq_data *wrqu, char *extra)
++{
++	int ret = 0;
++
++#ifdef CONFIG_TDLS
++	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++
++	printk( "[%s] %s %d\n", __FUNCTION__, extra, wrqu->data.length -1  );
++
++	issue_tdls_dis_req(padapter, NULL);
++
++#endif //CONFIG_TDLS
++
++	return ret;
++}
++
++static int rtw_tdls_ch_switch(struct net_device *dev,
++				struct iw_request_info *info,
++				union iwreq_data *wrqu, char *extra)
++{
++	int ret = 0;
++
++#ifdef CONFIG_TDLS
++	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct tdls_info	*ptdlsinfo = &padapter->tdlsinfo;
++	u8 i, j, mac_addr[ETH_ALEN];
++	struct sta_info *ptdls_sta = NULL;
++
++	printk( "[%s] %s %d\n", __FUNCTION__, extra, wrqu->data.length -1  );
++
++	for( i=0, j=0 ; i < ETH_ALEN; i++, j+=3 ){
++		mac_addr[i]=key_2char2num(*(extra+j), *(extra+j+1));
++	}
++
++	ptdls_sta = rtw_get_stainfo(&padapter->stapriv, mac_addr);
++	if( ptdls_sta == NULL )
++		return ret;
++	ptdlsinfo->ch_sensing=1;
++
++	rtw_tdls_cmd(padapter, ptdls_sta->hwaddr, TDLS_INIT_CH_SEN);
++
++#endif //CONFIG_TDLS
++
++		return ret;
++}
++	
++static int rtw_tdls_pson(struct net_device *dev,
++				struct iw_request_info *info,
++				union iwreq_data *wrqu, char *extra)
++{
++	int ret = 0;
++
++#ifdef CONFIG_TDLS
++	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	u8 i, j, mac_addr[ETH_ALEN];
++	struct sta_info *ptdls_sta = NULL;
++
++	printk( "[%s] %s %d\n", __FUNCTION__, extra, wrqu->data.length -1  );
++
++	for( i=0, j=0 ; i < ETH_ALEN; i++, j+=3 ){
++		mac_addr[i]=key_2char2num(*(extra+j), *(extra+j+1));
++	}
++
++	ptdls_sta = rtw_get_stainfo(&padapter->stapriv, mac_addr);
++
++	issue_nulldata_to_TDLS_peer_STA(padapter, ptdls_sta, 1);
++	
++#endif //CONFIG_TDLS
++
++		return ret;
++}
++	
++static int rtw_tdls_psoff(struct net_device *dev,
++				struct iw_request_info *info,
++				union iwreq_data *wrqu, char *extra)
++{
++	int ret = 0;
++
++#ifdef CONFIG_TDLS
++	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct mlme_ext_priv	*pmlmeext = &(padapter->mlmeextpriv);
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	u8 i, j, mac_addr[ETH_ALEN];
++	struct sta_info *ptdls_sta = NULL;
++	
++	printk( "[%s] %s %d\n", __FUNCTION__, extra, wrqu->data.length -1  );
++
++	for( i=0, j=0 ; i < ETH_ALEN; i++, j+=3 ){
++		mac_addr[i]=key_2char2num(*(extra+j), *(extra+j+1));
++	}
++
++	ptdls_sta = rtw_get_stainfo(&padapter->stapriv, mac_addr);
++
++	issue_nulldata_to_TDLS_peer_STA(padapter, ptdls_sta, 0);
++	
++#endif //CONFIG_TDLS
++
++	return ret;
++}
++
++static int rtw_tdls_setip(struct net_device *dev,
++				struct iw_request_info *info,
++				union iwreq_data *wrqu, char *extra)
++{
++	int ret = 0;
++
++#ifdef CONFIG_TDLS
++#ifdef CONFIG_WFD
++	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct tdls_info *ptdlsinfo = &padapter->tdlsinfo;
++	struct wifi_display_info *pwfd_info = ptdlsinfo->wfd_info;
++	u8 i=0, j=0, k=0, tag=0, ip[3] = { 0xff }, *ptr = extra;
++	
++	printk( "[%s] %s %d\n", __FUNCTION__, extra, wrqu->data.length - 1  );
++
++
++	while( i < 4 )
++	{
++		for( j=0; j < 4; j++)
++		{
++			if( *( extra + j + tag ) == '.' || *( extra + j + tag ) == '\0' )
++			{
++				if( j == 1 )
++					pwfd_info->ip_address[i]=convert_ip_addr( '0', '0', *(extra+(j-1)+tag));
++				if( j == 2 )
++					pwfd_info->ip_address[i]=convert_ip_addr( '0', *(extra+(j-2)+tag), *(extra+(j-1)+tag));
++				if( j == 3 )
++					pwfd_info->ip_address[i]=convert_ip_addr( *(extra+(j-3)+tag), *(extra+(j-2)+tag), *(extra+(j-1)+tag));	
++
++				tag += j + 1;
++				break;
++			}
++		}
++		i++;
++	}
++
++	printk( "[%s] Set IP = %u.%u.%u.%u \n", __FUNCTION__, 
++		ptdlsinfo->wfd_info->ip_address[0], ptdlsinfo->wfd_info->ip_address[1],
++		ptdlsinfo->wfd_info->ip_address[2], ptdlsinfo->wfd_info->ip_address[3]
++	);
++
++#endif //CONFIG_WFD	
++#endif //CONFIG_TDLS
++
++	return ret;
++}
++
++static int rtw_tdls_getip(struct net_device *dev,
++				struct iw_request_info *info,
++				union iwreq_data *wrqu, char *extra)
++{
++	int ret = 0;
++
++#ifdef CONFIG_TDLS
++#ifdef CONFIG_WFD
++	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct tdls_info *ptdlsinfo = &padapter->tdlsinfo;
++	struct wifi_display_info *pwfd_info = ptdlsinfo->wfd_info;
++	
++	printk( "[%s]\n", __FUNCTION__);
++
++	sprintf( extra, "\n\n%u.%u.%u.%u\n", 
++		pwfd_info->peer_ip_address[0], pwfd_info->peer_ip_address[1], 
++		pwfd_info->peer_ip_address[2], pwfd_info->peer_ip_address[3]
++		);
++
++	printk( "[%s] IP=%u.%u.%u.%u\n", __FUNCTION__,
++		pwfd_info->peer_ip_address[0], pwfd_info->peer_ip_address[1], 
++		pwfd_info->peer_ip_address[2], pwfd_info->peer_ip_address[3]
++		);
++	
++	wrqu->data.length = strlen( extra );
++
++#endif //CONFIG_WFD	
++#endif //CONFIG_TDLS
++
++	return ret;
++}
++
++static int rtw_tdls_getport(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	
++	int ret = 0;	
++
++#ifdef CONFIG_TDLS
++#ifdef CONFIG_WFD
++
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct tdls_info *ptdlsinfo = &padapter->tdlsinfo;
++	struct wifi_display_info *pwfd_info = ptdlsinfo->wfd_info;
++
++	printk( "[%s]\n", __FUNCTION__);
++
++	sprintf( extra, "\n\n%d\n", pwfd_info->peer_rtsp_ctrlport );
++	printk( "[%s] remote port = %d\n", __FUNCTION__, pwfd_info->peer_rtsp_ctrlport );
++	
++	wrqu->data.length = strlen( extra );
++
++#endif //CONFIG_WFD
++#endif //CONFIG_TDLS
++
++	return ret;
++		
++}
++
++//WFDTDLS, for sigma test
++static int rtw_tdls_dis_result(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	
++	int ret = 0;	
++
++#ifdef CONFIG_TDLS
++#ifdef CONFIG_WFD
++
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct tdls_info *ptdlsinfo = &padapter->tdlsinfo;
++	struct wifi_display_info *pwfd_info = ptdlsinfo->wfd_info;
++
++	printk( "[%s]\n", __FUNCTION__);
++
++	if(ptdlsinfo->dev_discovered == 1 )
++	{
++		sprintf( extra, "\n\nDis=1\n" );
++		ptdlsinfo->dev_discovered = 0;
++	}
++	
++	wrqu->data.length = strlen( extra );
++
++#endif //CONFIG_WFD
++#endif //CONFIG_TDLS
++
++	return ret;
++		
++}
++
++//WFDTDLS, for sigma test
++static int rtw_wfd_tdls_status(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	
++	int ret = 0;	
++
++#ifdef CONFIG_TDLS
++#ifdef CONFIG_WFD
++
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	struct tdls_info *ptdlsinfo = &padapter->tdlsinfo;
++	struct wifi_display_info *pwfd_info = ptdlsinfo->wfd_info;
++
++	printk( "[%s]\n", __FUNCTION__);
++
++	if(ptdlsinfo->setup_state == TDLS_LINKED_STATE )
++	{
++		sprintf( extra, "\n\nStatus=1\n" );
++	}
++	else
++	{
++		sprintf( extra, "\n\nStatus=0\n" );
++	}
++	
++	wrqu->data.length = strlen( extra );
++
++#endif //CONFIG_WFD
++#endif //CONFIG_TDLS
++
++	return ret;
++		
++}
++
++static int rtw_tdls_ch_switch_off(struct net_device *dev,
++				struct iw_request_info *info,
++				union iwreq_data *wrqu, char *extra)
++{
++	int ret = 0;
++
++#ifdef CONFIG_TDLS
++	
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	u8 i, j, mac_addr[ETH_ALEN];
++	struct sta_info *ptdls_sta = NULL;
++	
++	printk( "[%s] %s %d\n", __FUNCTION__, extra, wrqu->data.length -1  );
++
++	for( i=0, j=0 ; i < ETH_ALEN; i++, j+=3 ){
++		mac_addr[i]=key_2char2num(*(extra+j), *(extra+j+1));
++	}
++
++	ptdls_sta = rtw_get_stainfo(&padapter->stapriv, mac_addr);
++
++	ptdls_sta->tdls_sta_state |= TDLS_SW_OFF_STATE;
++/*
++	if((ptdls_sta->tdls_sta_state & TDLS_AT_OFF_CH_STATE) && (ptdls_sta->tdls_sta_state & TDLS_PEER_AT_OFF_STATE)){
++		pmlmeinfo->tdls_candidate_ch= pmlmeext->cur_channel;
++		issue_tdls_ch_switch_req(padapter, mac_addr);
++		DBG_871X("issue tdls ch switch req back to base channel\n");
++	}
++*/
++	
++#endif //CONFIG_TDLS
++
++	return ret;
++}
++
++static int rtw_tdls(struct net_device *dev,
++				struct iw_request_info *info,
++				union iwreq_data *wrqu, char *extra)
++{
++	int ret = 0;
++
++#ifdef CONFIG_TDLS
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++
++	printk( "[%s] extra = %s\n", __FUNCTION__, extra );
++	//	WFD Sigma will use the tdls enable command to let the driver know we want to test the tdls now!
++	if ( _rtw_memcmp( extra, "wfdenable=", 10 ) )
++	{
++		wrqu->data.length -=10;
++		rtw_wfd_tdls_enable( dev, info, wrqu, &extra[10] );
++		return ret;
++	}
++	else if ( _rtw_memcmp( extra, "weaksec=", 8 ) )
++	{
++		wrqu->data.length -=8;
++		rtw_tdls_weaksec( dev, info, wrqu, &extra[8] );
++		return ret;
++	}
++	else if ( _rtw_memcmp( extra, "tdlsenable=", 11 ) )
++	{
++		wrqu->data.length -=11;
++		rtw_tdls_enable( dev, info, wrqu, &extra[11] );
++		return ret;
++	}
++
++	if( padapter->tdlsinfo.enable == 0 )
++	{
++		printk("tdls haven't enabled\n");
++		return 0;
++	}
++
++	if ( _rtw_memcmp( extra, "setup=", 6 ) )
++	{
++		wrqu->data.length -=6;
++		rtw_tdls_setup( dev, info, wrqu, &extra[6] );
++	}
++	else if (_rtw_memcmp( extra, "tear=", 5 ) )
++	{
++		wrqu->data.length -= 5;
++		rtw_tdls_teardown( dev, info, wrqu, &extra[5] );
++	}
++	else if (_rtw_memcmp( extra, "dis=", 4 ) )
++	{
++		wrqu->data.length -= 4;
++		rtw_tdls_discovery( dev, info, wrqu, &extra[4] );
++	}
++	else if (_rtw_memcmp( extra, "sw=", 3 ) )
++	{
++		wrqu->data.length -= 3;
++		rtw_tdls_ch_switch( dev, info, wrqu, &extra[3] );
++	}
++	else if (_rtw_memcmp( extra, "swoff=", 6 ) )
++	{
++		wrqu->data.length -= 6;
++		rtw_tdls_ch_switch_off( dev, info, wrqu, &extra[6] );
++	}	
++	else if (_rtw_memcmp( extra, "pson=", 5 ) )
++	{
++		wrqu->data.length -= 5;
++		rtw_tdls_pson( dev, info, wrqu, &extra[5] );
++	}
++	else if (_rtw_memcmp( extra, "psoff=", 6 ) )
++	{
++		wrqu->data.length -= 6;
++		rtw_tdls_psoff( dev, info, wrqu, &extra[6] );
++	}
++#ifdef CONFIG_WFD
++	else if (_rtw_memcmp( extra, "setip=", 6 ) )
++	{
++		wrqu->data.length -= 6;
++		rtw_tdls_setip( dev, info, wrqu, &extra[6] );
++	}
++	else if (_rtw_memcmp( extra, "tprobe=", 6 ) )
++	{
++		issue_tunneled_probe_req((_adapter *)rtw_netdev_priv(dev));
++	}
++#endif //CONFIG_WFD
++
++#endif //CONFIG_TDLS
++	
++	return ret;
++}
++
++
++static int rtw_tdls_get(struct net_device *dev,
++				struct iw_request_info *info,
++				union iwreq_data *wrqu, char *extra)
++{
++	int ret = 0;
++
++#ifdef CONFIG_WFD
++
++	DBG_871X( "[%s] extra = %s\n", __FUNCTION__, (char*) wrqu->data.pointer );
++
++	if ( _rtw_memcmp( wrqu->data.pointer, "ip", 2 ) )
++	{
++		rtw_tdls_getip( dev, info, wrqu, extra );
++	}
++	if ( _rtw_memcmp( wrqu->data.pointer, "port", 4 ) )
++	{
++		rtw_tdls_getport( dev, info, wrqu, extra );
++	}
++
++	//WFDTDLS, for sigma test
++	if ( _rtw_memcmp( wrqu->data.pointer, "dis", 3 ) )
++	{
++		rtw_tdls_dis_result( dev, info, wrqu, extra );
++	}
++	if ( _rtw_memcmp( wrqu->data.pointer, "status", 6 ) )
++	{
++		rtw_wfd_tdls_status( dev, info, wrqu, extra );
++	}
++
++#endif //CONFIG_WFD
++
++	return ret;
++}
++
++static int rtw_pm_set(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	int ret = 0;
++	unsigned	mode = 0;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++
++	DBG_871X( "[%s] extra = %s\n", __FUNCTION__, extra );
++
++	if ( _rtw_memcmp( extra, "lps=", 4 ) )
++	{
++		sscanf(extra+4, "%u", &mode);	
++		ret = rtw_pm_set_lps(padapter,mode);
++	}
++	else if ( _rtw_memcmp( extra, "ips=", 4 ) )
++	{
++		sscanf(extra+4, "%u", &mode);
++		ret = rtw_pm_set_ips(padapter,mode);
++	}
++	else{
++		ret = -EINVAL;
++	}
++
++	return ret;
++}
++
++#ifdef CONFIG_WOWLAN
++static int rtw_wowlan_ctrl(struct net_device *dev,
++	struct iw_request_info *info,
++	union iwreq_data *wrqu, char *extra)
++{
++	int ret = 0;
++	struct oid_par_priv	oid_par;
++	struct wowlan_ioctl_param *poidparam;
++	uint status=0;
++	u16 len;
++	u8 *pparmbuf = NULL, bset;
++	_adapter *padapter =  (_adapter *)rtw_netdev_priv(dev);
++
++	struct iw_point *p = &wrqu->data;
++
++	//DBG_871X("+rtw_wowlan_ctrl\n");
++
++	//mutex_lock(&ioctl_mutex);
++
++	if ((!p->length) || (!p->pointer)) {
++		ret = -EINVAL;
++		goto _rtw_wowlan_ctrl_exit;
++	}
++
++	pparmbuf = NULL;
++	bset = (u8)(p->flags & 0xFFFF);
++	len = p->length;
++	pparmbuf = (u8*)rtw_malloc(len);
++	if (pparmbuf == NULL){
++		ret = -ENOMEM;
++		goto _rtw_wowlan_ctrl_exit;
++	}
++
++	if (copy_from_user(pparmbuf, p->pointer, len)) {
++		ret = -EFAULT;
++		goto _rtw_wowlan_ctrl_exit_free;
++	}
++	poidparam = (struct wowlan_ioctl_param *)pparmbuf;	
++
++	if(padapter->pwrctrlpriv.bSupportRemoteWakeup==_FALSE){
++		ret = -EPERM;
++		DBG_871X("+rtw_wowlan_ctrl: Device didn't support the remote wakeup!!\n");
++		goto _rtw_wowlan_ctrl_exit_free;
++	}
++	rtw_hal_set_hwreg(padapter,HW_VAR_WOWLAN,(u8 *)poidparam);
++	
++	DBG_871X("rtw_wowlan_ctrl: subcode [%d], len[%d], buffer_len[%d]\r\n",
++        	  poidparam->subcode, poidparam->len, len);
++	
++	if (copy_to_user(p->pointer, pparmbuf, len)) {
++		ret = -EFAULT;
++	}
++	
++	
++_rtw_wowlan_ctrl_exit_free:
++	//DBG_871X("-rtw_wowlan_ctrl( subcode = %d)\n", poidparam->subcode);
++	rtw_mfree(pparmbuf, len);
++_rtw_wowlan_ctrl_exit:
++	
++	
++	return ret;
++}
++#endif //CONFIG_WOWLAN
++
++#ifdef CONFIG_INTEL_WIDI
++static int rtw_widi_set(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	int ret = 0;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++
++	process_intel_widi_cmd(padapter, extra);
++
++	return ret;
++}
++
++static int rtw_widi_set_probe_request(struct net_device *dev,
++                               struct iw_request_info *info,
++                               union iwreq_data *wrqu, char *extra)
++{
++	int	ret = 0;
++	u8	*pbuf = NULL;
++	_adapter	*padapter = (_adapter *)rtw_netdev_priv(dev);
++
++	pbuf = rtw_malloc(sizeof(l2_msg_t));
++	if(pbuf)
++	{
++		copy_from_user(pbuf, wrqu->data.pointer, wrqu->data.length);
++		//_rtw_memcpy(pbuf, wrqu->data.pointer, wrqu->data.length);
++
++		if( wrqu->data.flags == 0 )
++		intel_widi_wk_cmd(padapter, INTEL_WIDI_ISSUE_PROB_WK, pbuf);
++		else if( wrqu->data.flags == 1 )
++			rtw_set_wfd_rds_sink_info( padapter, (l2_msg_t *)pbuf );
++	}
++	return ret;
++}
++
++#endif // CONFIG_INTEL_WIDI
++
++#ifdef RTL8723A_SDIO_LOOPBACK
++#include <rtl8723a_hal.h>
++
++static s32 initLoopback(PADAPTER padapter)
++{
++	PLOOPBACKDATA ploopback;
++
++
++	if (padapter->ploopback == NULL) {
++		ploopback = (PLOOPBACKDATA)rtw_zmalloc(sizeof(LOOPBACKDATA));
++		if (ploopback == NULL) return -ENOMEM;
++
++		_rtw_init_sema(&ploopback->sema, 0);
++
++		ploopback->bstop = _TRUE;
++		ploopback->cnt = 0;
++		ploopback->size = 300;
++		_rtw_memset(ploopback->msg, 0, sizeof(ploopback->msg));
++
++		padapter->ploopback = ploopback;
++	}
++
++	return 0;
++}
++
++static void freeLoopback(PADAPTER padapter)
++{
++	PLOOPBACKDATA ploopback;
++
++
++	ploopback = padapter->ploopback;
++	if (ploopback) {
++		rtw_mfree((u8*)ploopback, sizeof(LOOPBACKDATA));
++		padapter->ploopback = NULL;
++	}
++}
++
++static s32 initpseudoadhoc(PADAPTER padapter)
++{
++	NDIS_802_11_NETWORK_INFRASTRUCTURE networkType;
++	s32 err;
++	_irqL irqL;
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	_queue *queue = &pmlmepriv->scanned_queue;
++	
++	networkType = Ndis802_11IBSS;
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++	_enter_critical_bh(&queue->lock, &irqL);	
++	err = rtw_set_802_11_infrastructure_mode(padapter, networkType);
++	_exit_critical_bh(&queue->lock, &irqL);
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++	if (err == _FALSE) return _FAIL;
++
++	err = rtw_setopmode_cmd(padapter, networkType);
++	if (err == _FAIL) return _FAIL;
++
++	return _SUCCESS;
++}
++
++static s32 createpseudoadhoc(PADAPTER padapter)
++{
++	NDIS_802_11_AUTHENTICATION_MODE authmode;
++	struct mlme_priv *pmlmepriv;
++	NDIS_802_11_SSID *passoc_ssid;
++	WLAN_BSSID_EX *pdev_network;
++	u8 *pibss;
++	u8 ssid[] = "pseduo_ad-hoc";
++	s32 err;
++	_irqL irqL;
++
++
++	pmlmepriv = &padapter->mlmepriv;
++
++	authmode = Ndis802_11AuthModeOpen;
++	err = rtw_set_802_11_authentication_mode(padapter, authmode);
++	if (err == _FALSE) return _FAIL;
++
++	passoc_ssid = &pmlmepriv->assoc_ssid;
++	_rtw_memset(passoc_ssid, 0, sizeof(NDIS_802_11_SSID));
++	passoc_ssid->SsidLength = sizeof(ssid) - 1;
++	_rtw_memcpy(passoc_ssid->Ssid, ssid, passoc_ssid->SsidLength);
++
++	pdev_network = &padapter->registrypriv.dev_network;
++	pibss = padapter->registrypriv.dev_network.MacAddress;
++	_rtw_memcpy(&pdev_network->Ssid, passoc_ssid, sizeof(NDIS_802_11_SSID));
++
++	rtw_update_registrypriv_dev_network(padapter);
++	rtw_generate_random_ibss(pibss);
++
++	_enter_critical_bh(&pmlmepriv->lock, &irqL);
++	pmlmepriv->fw_state = WIFI_ADHOC_MASTER_STATE;
++	_exit_critical_bh(&pmlmepriv->lock, &irqL);
++
++#if 0
++	err = rtw_createbss_cmd(padapter);
++	if (err == _FAIL) return _FAIL;
++#else
++{
++	struct wlan_network *pcur_network;
++	struct sta_info *psta;
++
++	//3  create a new psta
++	pcur_network = &pmlmepriv->cur_network;
++
++	//clear psta in the cur_network, if any
++	psta = rtw_get_stainfo(&padapter->stapriv, pcur_network->network.MacAddress);
++	if (psta) rtw_free_stainfo(padapter, psta);
++
++	psta = rtw_alloc_stainfo(&padapter->stapriv, pibss);
++	if (psta == NULL) return _FAIL;
++
++	//3  join psudo AdHoc
++	pcur_network->join_res = 1;
++	pcur_network->aid = psta->aid = 1;
++	_rtw_memcpy(&pcur_network->network, pdev_network, get_WLAN_BSSID_EX_sz(pdev_network));
++
++	// set msr to WIFI_FW_ADHOC_STATE
++#if 0
++	Set_NETYPE0_MSR(padapter, WIFI_FW_ADHOC_STATE);
++#else
++	{
++		u8 val8;
++
++		val8 = rtw_read8(padapter, MSR);
++		val8 &= 0xFC; // clear NETYPE0
++		val8 |= WIFI_FW_ADHOC_STATE & 0x3;
++		rtw_write8(padapter, MSR, val8);
++	}
++#endif
++}
++#endif
++
++	return _SUCCESS;
++}
++
++extern void rtl8723a_cal_txdesc_chksum(struct tx_desc *ptxdesc);
++extern void rtl8723a_fill_default_txdesc(struct xmit_frame *pxmitframe, u8 *pbuf);
++
++static struct xmit_frame* createloopbackpkt(PADAPTER padapter, u32 size)
++{
++	struct xmit_priv *pxmitpriv;
++	struct xmit_frame *pframe;
++	struct xmit_buf *pxmitbuf;
++	struct pkt_attrib *pattrib;
++	struct tx_desc *desc;
++	u8 *pkt_start, *pkt_end, *ptr;
++	struct rtw_ieee80211_hdr *hdr;
++	s32 bmcast;
++	_irqL irqL;
++
++
++	if ((TXDESC_SIZE + WLANHDR_OFFSET + size) > MAX_XMITBUF_SZ) return NULL;
++
++	pxmitpriv = &padapter->xmitpriv;
++	pframe = NULL;
++
++	//2 1. allocate xmit frame
++	pframe = rtw_alloc_xmitframe(pxmitpriv);
++	if (pframe == NULL) return NULL;
++	pframe->padapter = padapter;
++
++	//2 2. allocate xmit buffer
++	_enter_critical_bh(&pxmitpriv->lock, &irqL);
++	pxmitbuf = rtw_alloc_xmitbuf(pxmitpriv);
++	_exit_critical_bh(&pxmitpriv->lock, &irqL);
++	if (pxmitbuf == NULL) {
++		rtw_free_xmitframe(pxmitpriv, pframe);
++		return NULL;
++	}
++
++	pframe->pxmitbuf = pxmitbuf;
++	pframe->buf_addr = pxmitbuf->pbuf;
++	pxmitbuf->priv_data = pframe;
++
++	//2 3. update_attrib()
++	pattrib = &pframe->attrib;
++
++	// init xmitframe attribute
++	_rtw_memset(pattrib, 0, sizeof(struct pkt_attrib));
++
++	pattrib->ether_type = 0x8723;
++	_rtw_memcpy(pattrib->src, padapter->eeprompriv.mac_addr, ETH_ALEN);
++	_rtw_memcpy(pattrib->ta, pattrib->src, ETH_ALEN);
++	_rtw_memset(pattrib->dst, 0xFF, ETH_ALEN);
++	_rtw_memcpy(pattrib->ra, pattrib->dst, ETH_ALEN);
++//	pattrib->pctrl = 0;
++//	pattrib->dhcp_pkt = 0;
++//	pattrib->pktlen = 0;
++	pattrib->ack_policy = 0;
++//	pattrib->pkt_hdrlen = ETH_HLEN;
++	pattrib->hdrlen = WLAN_HDR_A3_LEN;
++	pattrib->subtype = WIFI_DATA;
++	pattrib->priority = 0;
++	pattrib->qsel = pattrib->priority;
++//	do_queue_select(padapter, pattrib);
++	pattrib->nr_frags = 1;
++	pattrib->encrypt = 0;
++	pattrib->bswenc = _FALSE;
++	pattrib->qos_en = _FALSE;
++
++	bmcast = IS_MCAST(pattrib->ra);
++	if (bmcast) {
++		pattrib->mac_id = 1;
++		pattrib->psta = rtw_get_bcmc_stainfo(padapter);
++	} else {
++		pattrib->mac_id = 0;
++		pattrib->psta = rtw_get_stainfo(&padapter->stapriv, get_bssid(&padapter->mlmepriv));
++	}
++
++	pattrib->pktlen = size;
++	pattrib->last_txcmdsz = pattrib->hdrlen + pattrib->pktlen;
++
++	//2 4. fill TX descriptor
++	desc = (struct tx_desc*)pframe->buf_addr;
++	_rtw_memset(desc, 0, TXDESC_SIZE);
++
++	rtl8723a_fill_default_txdesc(pframe, (u8*)desc);
++
++	// Hw set sequence number
++	((PTXDESC)desc)->hwseq_en = 0; // HWSEQ_EN, 0:disable, 1:enable
++//	((PTXDESC)desc)->hwseq_sel = 0; // HWSEQ_SEL
++
++	((PTXDESC)desc)->disdatafb = 1;
++
++	// convert to little endian
++	desc->txdw0 = cpu_to_le32(desc->txdw0);
++	desc->txdw1 = cpu_to_le32(desc->txdw1);
++	desc->txdw2 = cpu_to_le32(desc->txdw2);
++	desc->txdw3 = cpu_to_le32(desc->txdw3);
++	desc->txdw4 = cpu_to_le32(desc->txdw4);
++	desc->txdw5 = cpu_to_le32(desc->txdw5);
++	desc->txdw6 = cpu_to_le32(desc->txdw6);
++	desc->txdw7 = cpu_to_le32(desc->txdw7);
++#ifdef CONFIG_PCI_HCI
++	desc->txdw8 = cpu_to_le32(desc->txdw8);
++	desc->txdw9 = cpu_to_le32(desc->txdw9);
++	desc->txdw10 = cpu_to_le32(desc->txdw10);
++	desc->txdw11 = cpu_to_le32(desc->txdw11);
++	desc->txdw12 = cpu_to_le32(desc->txdw12);
++	desc->txdw13 = cpu_to_le32(desc->txdw13);
++	desc->txdw14 = cpu_to_le32(desc->txdw14);
++	desc->txdw15 = cpu_to_le32(desc->txdw15);
++#endif
++
++	rtl8723a_cal_txdesc_chksum(desc);
++
++	//2 5. coalesce
++	pkt_start = pframe->buf_addr + TXDESC_SIZE;
++	pkt_end = pkt_start + pattrib->last_txcmdsz;
++
++	//3 5.1. make wlan header, make_wlanhdr()
++	hdr = (struct rtw_ieee80211_hdr *)pkt_start;
++	SetFrameSubType(&hdr->frame_ctl, pattrib->subtype);
++	_rtw_memcpy(hdr->addr1, pattrib->dst, ETH_ALEN); // DA
++	_rtw_memcpy(hdr->addr2, pattrib->src, ETH_ALEN); // SA
++	_rtw_memcpy(hdr->addr3, get_bssid(&padapter->mlmepriv), ETH_ALEN); // RA, BSSID
++
++	//3 5.2. make payload
++	ptr = pkt_start + pattrib->hdrlen;
++	get_random_bytes(ptr, pkt_end - ptr);
++
++	pxmitbuf->len = TXDESC_SIZE + pattrib->last_txcmdsz;
++	pxmitbuf->ptail += pxmitbuf->len;
++
++	return pframe;
++}
++
++static void freeloopbackpkt(PADAPTER padapter, struct xmit_frame *pframe)
++{
++	struct xmit_priv *pxmitpriv;
++	struct xmit_buf *pxmitbuf;
++
++
++	pxmitpriv = &padapter->xmitpriv;
++	pxmitbuf = pframe->pxmitbuf;
++
++	rtw_free_xmitframe(pxmitpriv, pframe);
++	rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
++}
++
++extern u32 get_txfifo_hwaddr(struct xmit_frame *pxmitframe);
++
++thread_return lbk_thread(thread_context context)
++{
++	s32 err;
++	PADAPTER padapter;
++	PLOOPBACKDATA ploopback;
++	struct xmit_frame *pxmitframe;
++	u32 cnt, ok, fail, i, headerlen;
++	u32 pktsize;
++	u32 ff_hwaddr;
++
++
++	padapter = (PADAPTER)context;
++	ploopback = padapter->ploopback;
++	if (ploopback == NULL) return -1;
++	cnt = 0;
++	ok = 0;
++	fail = 0;
++
++	daemonize("%s", "RTW_LBK_THREAD");
++	allow_signal(SIGTERM);
++
++	do {
++		if (ploopback->size == 0) {
++			get_random_bytes(&pktsize, 4);
++			pktsize = (pktsize % 1535) + 1; // 1~1535
++		} else
++			pktsize = ploopback->size;
++		
++		pxmitframe = createloopbackpkt(padapter, pktsize);
++		if (pxmitframe == NULL) {
++			sprintf(ploopback->msg, "loopback FAIL! 3. create Packet FAIL!");
++			break;
++		}
++		
++		ploopback->txsize = TXDESC_SIZE + pxmitframe->attrib.last_txcmdsz;
++		_rtw_memcpy(ploopback->txbuf, pxmitframe->buf_addr, ploopback->txsize);
++		
++		ff_hwaddr = get_txfifo_hwaddr(pxmitframe);
++		rtw_write_port(padapter, ff_hwaddr, ploopback->txsize, ploopback->txbuf);
++		cnt++;
++
++		_rtw_down_sema(&ploopback->sema);
++
++{
++		PHAL_DATA_TYPE phal;
++		struct recv_stat *prxstat;
++		struct recv_stat report;
++		PRXREPORT prxreport;
++		u32 drvinfosize;
++		u32 rxpktsize;
++		u8 fcssize;
++
++		prxstat = (struct recv_stat*)ploopback->rxbuf;
++		report.rxdw0 = le32_to_cpu(prxstat->rxdw0);
++		report.rxdw1 = le32_to_cpu(prxstat->rxdw1);
++		report.rxdw2 = le32_to_cpu(prxstat->rxdw2);
++		report.rxdw3 = le32_to_cpu(prxstat->rxdw3);
++		report.rxdw4 = le32_to_cpu(prxstat->rxdw4);
++		report.rxdw5 = le32_to_cpu(prxstat->rxdw5);
++
++		prxreport = (PRXREPORT)&report;
++		drvinfosize = prxreport->drvinfosize << 3;
++		rxpktsize = prxreport->pktlen;
++
++		phal = GET_HAL_DATA(padapter);
++		if (phal->ReceiveConfig & RCR_APPFCS) fcssize = IEEE80211_FCS_LEN;
++		else fcssize = 0;
++
++		if ((ploopback->txsize - TXDESC_SIZE) != (rxpktsize - fcssize)) {
++			printk("%s: cnt=%d, size not match! tx=%d rx=%d\n",
++				__func__, i, ploopback->txsize - TXDESC_SIZE,
++				rxpktsize - fcssize);
++			err = _FALSE;
++		} else {
++			err = _rtw_memcmp(ploopback->txbuf + TXDESC_SIZE,\
++							  ploopback->rxbuf + RXDESC_SIZE + drvinfosize,\
++							  ploopback->txsize - TXDESC_SIZE);
++		}
++}
++
++		if (err == _TRUE)
++			ok++;
++		else
++			fail++;
++
++		ploopback->txsize = 0;
++		_rtw_memset(ploopback->txbuf, 0, 0x8000);
++		ploopback->rxsize = 0;
++		_rtw_memset(ploopback->rxbuf, 0, 0x8000);
++
++		freeloopbackpkt(padapter, pxmitframe);
++		pxmitframe = NULL;
++
++		if (signal_pending(current)) {
++			flush_signals(current);
++		}
++
++		if ((ploopback->bstop == _TRUE) ||
++			((ploopback->cnt != 0) && (ploopback->cnt == cnt)))
++		{
++			u32 ok_rate, fail_rate;
++			ok_rate = (ok*100)/cnt;
++			fail_rate = (fail*100)/cnt;
++			sprintf(ploopback->msg, "loopback result: ok=%d%%(%d/%d),error=%d%%(%d/%d)", ok_rate, ok, cnt, fail_rate, fail, cnt);
++			break;
++		}
++	} while (1);
++
++	ploopback->bstop = _TRUE;
++
++	thread_exit();
++}
++
++static void loopbackTest(PADAPTER padapter, u32 cnt, u32 size, u8* pmsg)
++{
++	PLOOPBACKDATA ploopback;
++	u32 len;
++	s32 err;
++
++
++	ploopback = padapter->ploopback;
++
++	if (ploopback)
++	{
++		ploopback->bstop = _TRUE;
++		len = 0;
++		do {
++			len = strlen(ploopback->msg);
++			if (len) break;
++			rtw_msleep_os(1);
++		} while (1);
++		_rtw_memcpy(pmsg, ploopback->msg, len+1);
++		freeLoopback(padapter);
++		return;
++	}
++	
++	// create pseudo ad-hoc connection
++	err = initpseudoadhoc(padapter);
++	if (err == _FAIL) {
++		sprintf(pmsg, "loopback FAIL! 1.1 init ad-hoc FAIL!");
++		return;
++	}
++
++	err = createpseudoadhoc(padapter);
++	if (err == _FAIL) {
++		sprintf(pmsg, "loopback FAIL! 1.2 create ad-hoc master FAIL!");
++		return;
++	}
++
++	err = initLoopback(padapter);
++	if (err) {
++		sprintf(pmsg, "loopback FAIL! 2. init FAIL! error code=%d", err);
++		return;
++	}
++
++	ploopback = padapter->ploopback;
++
++	ploopback->bstop = _FALSE;
++	ploopback->cnt = cnt;
++	ploopback->size = size;
++	ploopback->lbkthread = kthread_run(lbk_thread, padapter, "RTW_LBK_THREAD");
++	if (IS_ERR(padapter->lbkthread))
++	{
++		freeLoopback(padapter);
++		sprintf(pmsg, "loopback start FAIL! cnt=%d", cnt);
++		return;
++	}
++
++	sprintf(pmsg, "loopback start! cnt=%d", cnt);
++}
++
++extern u8 _InitPowerOn(PADAPTER padapter);
++extern s32 rtl8723a_FirmwareDownload(PADAPTER padapter);
++
++static int rtw_test(
++	struct net_device *dev,
++	struct iw_request_info *info,
++	union iwreq_data *wrqu, char *extra)
++{
++	u32 len;
++	u8 *pbuf, *pch;
++	char *ptmp;
++	u8 *delim = ",";
++	PADAPTER padapter = rtw_netdev_priv(dev);
++
++
++	printk("+%s\n", __func__);
++	len = wrqu->data.length;
++
++	pbuf = (u8*)rtw_zmalloc(len);
++	if (pbuf == NULL) {
++		printk("%s: no memory!\n", __func__);
++		return -ENOMEM;
++	}
++
++	if (copy_from_user(pbuf, wrqu->data.pointer, len)) {
++		rtw_mfree(pbuf, len);
++		printk("%s: copy from user fail!\n", __func__);
++		return -EFAULT;
++	}
++	printk("%s: string=\"%s\"\n", __func__, pbuf);
++
++	ptmp = (char*)pbuf;
++	pch = strsep(&ptmp, delim);
++	if ((pch == NULL) || (strlen(pch) == 0)) {
++		rtw_mfree(pbuf, len);
++		printk("%s: parameter error(level 1)!\n", __func__);
++		return -EFAULT;
++	}
++
++#ifdef RTL8723A_SDIO_LOOPBACK
++	if (strcmp(pch, "loopback") == 0)
++	{
++		s32 cnt = 0;
++		u32 size = 64;
++
++		pch = strsep(&ptmp, delim);
++		if ((pch == NULL) || (strlen(pch) == 0)) {
++			rtw_mfree(pbuf, len);
++			printk("%s: parameter error(level 2)!\n", __func__);
++			return -EFAULT;
++		}
++
++		sscanf(pch, "%d", &cnt);
++		printk("%s: loopback cnt=%d\n", __func__, cnt);
++
++		pch = strsep(&ptmp, delim);
++		if ((pch == NULL) || (strlen(pch) == 0)) {
++			rtw_mfree(pbuf, len);
++			printk("%s: parameter error(level 2)!\n", __func__);
++			return -EFAULT;
++		}
++
++		sscanf(pch, "%d", &size);
++		printk("%s: loopback size=%d\n", __func__, size);
++
++		loopbackTest(padapter, cnt, size, extra);
++		wrqu->data.length = strlen(extra) + 1;
++
++		rtw_mfree(pbuf, len);
++		return 0;
++	}
++#endif
++
++	if (strcmp(pch, "poweron") == 0)
++	{
++		s32 ret;
++
++		ret = _InitPowerOn(padapter);
++		if (_FAIL == ret)
++			printk("%s: power on FAIL!\n", __func__);
++		else
++			printk("%s: power on OK.\n", __func__);
++
++		rtw_mfree(pbuf, len);
++		return 0;
++	}
++
++	if (strcmp(pch, "dlfw") == 0)
++	{
++		s32 ret;
++
++		ret = rtl8723a_FirmwareDownload(padapter);
++		if (_FAIL == ret)
++			printk("%s: download FW FAIL!\n", __func__);
++		else
++			printk("%s: download FW OK.\n", __func__);
++
++		rtw_mfree(pbuf, len);
++		return 0;
++	}
++
++	rtw_mfree(pbuf, len);
++	return 0;
++}
++#else
++static int rtw_test(
++	struct net_device *dev,
++	struct iw_request_info *info,
++	union iwreq_data *wrqu, char *extra)
++{
++	printk("%s\n", __func__);
++	return 0;
++}
++#endif //RTL8723A_SDIO_LOOPBACK
++
++#include <rtw_android.h>
++int rtw_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
++{
++	struct iwreq *wrq = (struct iwreq *)rq;
++	int ret=0;
++
++	switch (cmd)
++	{
++	    case RTL_IOCTL_WPA_SUPPLICANT:	
++			ret = wpa_supplicant_ioctl(dev, &wrq->u.data);
++			break;
++#ifdef CONFIG_AP_MODE
++		case RTL_IOCTL_HOSTAPD:
++			ret = rtw_hostapd_ioctl(dev, &wrq->u.data);			
++			break;
++#ifdef CONFIG_NO_WIRELESS_HANDLERS			
++		case SIOCSIWMODE:
++			ret = rtw_wx_set_mode(dev, NULL, &wrq->u, NULL);
++			break;
++#endif			
++#endif
++		case (SIOCDEVPRIVATE+1):
++			ret = rtw_android_priv_cmd(dev, rq, cmd);
++			break;
++	    default:
++			ret = -EOPNOTSUPP;
++			break;
++	}
++	
++	return ret;
++}
++
++static iw_handler rtw_handlers[] =
++{
++	NULL,					/* SIOCSIWCOMMIT */
++	rtw_wx_get_name,		/* SIOCGIWNAME */
++	dummy,					/* SIOCSIWNWID */
++	dummy,					/* SIOCGIWNWID */
++	rtw_wx_set_freq,		/* SIOCSIWFREQ */
++	rtw_wx_get_freq,		/* SIOCGIWFREQ */
++	rtw_wx_set_mode,		/* SIOCSIWMODE */
++	rtw_wx_get_mode,		/* SIOCGIWMODE */
++	dummy,					/* SIOCSIWSENS */
++	rtw_wx_get_sens,		/* SIOCGIWSENS */
++	NULL,					/* SIOCSIWRANGE */
++	rtw_wx_get_range,		/* SIOCGIWRANGE */
++	rtw_wx_set_priv,		/* SIOCSIWPRIV */
++	NULL,					/* SIOCGIWPRIV */
++	NULL,					/* SIOCSIWSTATS */
++	NULL,					/* SIOCGIWSTATS */
++	dummy,					/* SIOCSIWSPY */
++	dummy,					/* SIOCGIWSPY */
++	NULL,					/* SIOCGIWTHRSPY */
++	NULL,					/* SIOCWIWTHRSPY */
++	rtw_wx_set_wap,		/* SIOCSIWAP */
++	rtw_wx_get_wap,		/* SIOCGIWAP */
++	rtw_wx_set_mlme,		/* request MLME operation; uses struct iw_mlme */
++	dummy,					/* SIOCGIWAPLIST -- depricated */
++	rtw_wx_set_scan,		/* SIOCSIWSCAN */
++	rtw_wx_get_scan,		/* SIOCGIWSCAN */
++	rtw_wx_set_essid,		/* SIOCSIWESSID */
++	rtw_wx_get_essid,		/* SIOCGIWESSID */
++	dummy,					/* SIOCSIWNICKN */
++	rtw_wx_get_nick,		/* SIOCGIWNICKN */
++	NULL,					/* -- hole -- */
++	NULL,					/* -- hole -- */
++	rtw_wx_set_rate,		/* SIOCSIWRATE */
++	rtw_wx_get_rate,		/* SIOCGIWRATE */
++	rtw_wx_set_rts,			/* SIOCSIWRTS */
++	rtw_wx_get_rts,			/* SIOCGIWRTS */
++	rtw_wx_set_frag,		/* SIOCSIWFRAG */
++	rtw_wx_get_frag,		/* SIOCGIWFRAG */
++	dummy,					/* SIOCSIWTXPOW */
++	dummy,					/* SIOCGIWTXPOW */
++	dummy,					/* SIOCSIWRETRY */
++	rtw_wx_get_retry,		/* SIOCGIWRETRY */
++	rtw_wx_set_enc,			/* SIOCSIWENCODE */
++	rtw_wx_get_enc,			/* SIOCGIWENCODE */
++	dummy,					/* SIOCSIWPOWER */
++	rtw_wx_get_power,		/* SIOCGIWPOWER */
++	NULL,					/*---hole---*/
++	NULL,					/*---hole---*/
++	rtw_wx_set_gen_ie,		/* SIOCSIWGENIE */
++	NULL,					/* SIOCGWGENIE */
++	rtw_wx_set_auth,		/* SIOCSIWAUTH */
++	NULL,					/* SIOCGIWAUTH */
++	rtw_wx_set_enc_ext,		/* SIOCSIWENCODEEXT */
++	NULL,					/* SIOCGIWENCODEEXT */
++	rtw_wx_set_pmkid,		/* SIOCSIWPMKSA */
++	NULL,					/*---hole---*/
++}; 
++
++#if defined(CONFIG_MP_INCLUDED) && defined(CONFIG_MP_IWPRIV_SUPPORT)
++
++static const struct iw_priv_args rtw_private_args[] =
++{	
++	{ SIOCIWFIRSTPRIV + 0x00, IW_PRIV_TYPE_CHAR | 1024, 0 , ""},  //set 
++	{ SIOCIWFIRSTPRIV + 0x01, IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK , ""},//get
++/* --- sub-ioctls definitions --- */   
++		{ MP_START , IW_PRIV_TYPE_CHAR | 1024, 0, "mp_start" }, //set
++		{ MP_PHYPARA, IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "mp_phypara" },//get
++		{ MP_STOP , IW_PRIV_TYPE_CHAR | 1024, 0, "mp_stop" }, //set
++		{ MP_CHANNEL , IW_PRIV_TYPE_CHAR | 1024 , IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "mp_channel" },//get
++		{ MP_BANDWIDTH , IW_PRIV_TYPE_CHAR | 1024, 0, "mp_bandwidth"}, //set
++		{ MP_RATE , IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "mp_rate" },//get
++		{ MP_RESET_STATS , IW_PRIV_TYPE_CHAR | 1024, 0, "mp_reset_stats"},
++		{ MP_QUERY , IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK , "mp_query"}, //get
++		{ MP_NULL, IW_PRIV_TYPE_CHAR | 128, 0,"NULL"},//set
++		{ READ_REG , IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "read_reg" },
++		{ MP_NULL, IW_PRIV_TYPE_CHAR | 128, 0,"NULL"},//set
++		{ MP_RATE , IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "mp_rate" },
++		{ MP_NULL, IW_PRIV_TYPE_CHAR | 128, 0,"NULL"},//set
++		{ READ_RF , IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "read_rf" },
++		{ MP_NULL, IW_PRIV_TYPE_CHAR | 128, 0,"NULL"},//set
++		{ MP_PSD , IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "mp_psd"}, 
++		{ MP_NULL, IW_PRIV_TYPE_CHAR | 128, 0,"NULL"},//set
++		{ MP_DUMP, IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "mp_dump" },
++		{ MP_NULL, IW_PRIV_TYPE_CHAR | 128, 0,"NULL"},//set
++		{ MP_TXPOWER , IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "mp_txpower"},
++		{ MP_NULL, IW_PRIV_TYPE_CHAR | 128, 0,"NULL"},//set
++		{ MP_ANT_TX , IW_PRIV_TYPE_CHAR | 1024,  IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "mp_ant_tx"},
++		{ MP_NULL, IW_PRIV_TYPE_CHAR | 128, 0,"NULL"},//set
++		{ MP_ANT_RX , IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "mp_ant_rx"},
++		{ MP_NULL, IW_PRIV_TYPE_CHAR | 128, 0,"NULL"},//set
++		{ WRITE_REG , IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "write_reg" },
++		{ MP_NULL, IW_PRIV_TYPE_CHAR | 128, 0,"NULL"},//set
++		{ WRITE_RF , IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "write_rf" },
++		{ MP_NULL, IW_PRIV_TYPE_CHAR | 128, 0,"NULL"},//set
++		{ MP_CTX , IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "mp_ctx"},
++		{ MP_NULL, IW_PRIV_TYPE_CHAR | 128, 0,"NULL"},//set
++		{ MP_ARX , IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "mp_arx"},
++		{ MP_ANT_RX , IW_PRIV_TYPE_CHAR | 1024, 0, "mp_ant_rx"},
++		{ MP_THER , IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "mp_ther"},
++		{ EFUSE_SET, IW_PRIV_TYPE_CHAR | 1024, 0, "efuse_set" },
++		{ EFUSE_GET, IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "efuse_get" },
++		{ MP_NULL , IW_PRIV_TYPE_CHAR | 1024, 0, "NULL"},
++		{ MP_PWRTRK, IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "mp_pwrtrk" },
++		{ MP_IOCTL, IW_PRIV_TYPE_CHAR | 1024, 0, "mp_ioctl"}, // mp_ioctl	
++		
++	
++	{ SIOCIWFIRSTPRIV + 0x02, IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK , "test"},//set
++};
++
++
++static iw_handler rtw_private_handler[] = 
++{
++	rtw_mp_set,
++	rtw_mp_get,
++};
++
++#else // not inlucde MP
++
++static const struct iw_priv_args rtw_private_args[] = {
++	{
++		SIOCIWFIRSTPRIV + 0x0,
++		IW_PRIV_TYPE_CHAR | 0x7FF, 0, "write"
++	},
++	{
++		SIOCIWFIRSTPRIV + 0x1,
++		IW_PRIV_TYPE_CHAR | 0x7FF,
++		IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "read"
++	},
++	{
++		SIOCIWFIRSTPRIV + 0x2, 0, 0, "driver_ext"
++	},
++	{
++		SIOCIWFIRSTPRIV + 0x3, 0, 0, "mp_ioctl"
++	},
++	{
++		SIOCIWFIRSTPRIV + 0x4,
++		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "apinfo"
++	},
++	{
++		SIOCIWFIRSTPRIV + 0x5,
++		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "setpid"
++	},
++	{
++		SIOCIWFIRSTPRIV + 0x6,
++		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "wps_start"
++	},
++//for PLATFORM_MT53XX	
++	{
++		SIOCIWFIRSTPRIV + 0x7,
++		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "get_sensitivity"
++	},
++	{
++		SIOCIWFIRSTPRIV + 0x8,
++		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "wps_prob_req_ie"
++	},
++	{
++		SIOCIWFIRSTPRIV + 0x9,
++		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "wps_assoc_req_ie"
++	},
++
++//for RTK_DMP_PLATFORM	
++	{
++		SIOCIWFIRSTPRIV + 0xA,
++		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "channel_plan"
++	},
++
++	{
++		SIOCIWFIRSTPRIV + 0xB,
++		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "dbg"
++	},	
++	{
++		SIOCIWFIRSTPRIV + 0xC,
++		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 3, 0, "rfw"
++	},
++	{
++		SIOCIWFIRSTPRIV + 0xD,
++		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "rfr"
++	},
++#ifdef CONFIG_WOWLAN
++	{
++		SIOCIWFIRSTPRIV + 0xE,0,0, "wowlan_ctrl"
++	},
++#endif // CONFIG_WOWLAN
++	{
++		SIOCIWFIRSTPRIV + 0x10,
++		IW_PRIV_TYPE_CHAR | 1024, 0, "p2p_set"
++	},
++	{
++		SIOCIWFIRSTPRIV + 0x11,
++		IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK , "p2p_get"
++	},
++	{
++		SIOCIWFIRSTPRIV + 0x12, 0, 0, "NULL"
++	},
++	{
++		SIOCIWFIRSTPRIV + 0x13,
++		IW_PRIV_TYPE_CHAR | 64, IW_PRIV_TYPE_CHAR | 64 , "p2p_get2"
++	},	
++	{
++		SIOCIWFIRSTPRIV + 0x14,
++		IW_PRIV_TYPE_CHAR  | 64, 0, "tdls"
++	},
++	{
++		SIOCIWFIRSTPRIV + 0x15,
++		IW_PRIV_TYPE_CHAR | P2P_PRIVATE_IOCTL_SET_LEN, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | P2P_PRIVATE_IOCTL_SET_LEN , "tdls_get"
++	},	
++	{
++		SIOCIWFIRSTPRIV + 0x16,
++		IW_PRIV_TYPE_CHAR | 64, 0, "pm_set"
++	},
++
++	{SIOCIWFIRSTPRIV + 0x18, IW_PRIV_TYPE_CHAR | IFNAMSIZ , 0 , "rereg_nd_name"},
++
++	{SIOCIWFIRSTPRIV + 0x1A, IW_PRIV_TYPE_CHAR | 128, 0, "efuse_set"},
++	{SIOCIWFIRSTPRIV + 0x1B, IW_PRIV_TYPE_CHAR | 128, IW_PRIV_TYPE_CHAR |IW_PRIV_SIZE_FIXED |0x700 ,"efuse_get"},
++	{
++		SIOCIWFIRSTPRIV + 0x1D,
++		IW_PRIV_TYPE_CHAR | 40, IW_PRIV_TYPE_CHAR | 0x7FF, "test"
++	},
++#ifdef CONFIG_INTEL_WIDI
++	{
++		SIOCIWFIRSTPRIV + 0x1E,
++		IW_PRIV_TYPE_CHAR | 1024, 0, "widi_set"
++	},
++	{
++		SIOCIWFIRSTPRIV + 0x1F,
++		IW_PRIV_TYPE_CHAR | 128, 0, "widi_prob_req"
++	},
++#endif // CONFIG_INTEL_WIDI
++};
++
++static iw_handler rtw_private_handler[] = 
++{
++	rtw_wx_write32,					//0x00
++	rtw_wx_read32,					//0x01
++	rtw_drvext_hdl,					//0x02
++	rtw_mp_ioctl_hdl,				//0x03
++
++// for MM DTV platform
++	rtw_get_ap_info,					//0x04
++
++	rtw_set_pid,						//0x05
++	rtw_wps_start,					//0x06
++
++// for PLATFORM_MT53XX
++	rtw_wx_get_sensitivity,			//0x07
++	rtw_wx_set_mtk_wps_probe_ie,	//0x08
++	rtw_wx_set_mtk_wps_ie,			//0x09
++
++// for RTK_DMP_PLATFORM
++// Set Channel depend on the country code
++	rtw_wx_set_channel_plan,		//0x0A
++
++	rtw_dbg_port,					//0x0B
++	rtw_wx_write_rf,					//0x0C
++	rtw_wx_read_rf,					//0x0D
++
++#ifdef CONFIG_WOWLAN
++	rtw_wowlan_ctrl,					//0x0E
++#else
++	rtw_wx_priv_null,				//0x0E
++#endif //CONFIG_WOWLAN
++	rtw_wx_priv_null,				//0x0F
++
++	rtw_p2p_set,					//0x10
++	rtw_p2p_get,					//0x11
++	NULL,							//0x12
++	rtw_p2p_get2,					//0x13
++
++	rtw_tdls,						//0x14
++	rtw_tdls_get,					//0x15
++
++	rtw_pm_set,						//0x16
++	rtw_wx_priv_null,				//0x17
++	rtw_rereg_nd_name,				//0x18
++	rtw_wx_priv_null,				//0x19
++
++	rtw_mp_efuse_set,				//0x1A
++	rtw_mp_efuse_get,				//0x1B
++	NULL,							// 0x1C is reserved for hostapd
++	rtw_test	,						// 0x1D
++#ifdef CONFIG_INTEL_WIDI
++	rtw_widi_set,					//0x1E
++	rtw_widi_set_probe_request,		//0x1F
++#endif // CONFIG_INTEL_WIDI
++};
++
++#endif // #if defined(CONFIG_MP_INCLUDED) && defined(CONFIG_MP_IWPRIV_SUPPORT)
++
++#if WIRELESS_EXT >= 17	
++static struct iw_statistics *rtw_get_wireless_stats(struct net_device *dev)
++{
++       _adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
++	   struct iw_statistics *piwstats=&padapter->iwstats;
++	int tmp_level = 0;
++	int tmp_qual = 0;
++	int tmp_noise = 0;
++
++	if (check_fwstate(&padapter->mlmepriv, _FW_LINKED) != _TRUE)
++	{
++		piwstats->qual.qual = 0;
++		piwstats->qual.level = 0;
++		piwstats->qual.noise = 0;
++		//DBG_871X("No link  level:%d, qual:%d, noise:%d\n", tmp_level, tmp_qual, tmp_noise);
++	}
++	else{
++		#ifdef CONFIG_SIGNAL_DISPLAY_DBM
++		tmp_level = translate_percentage_to_dbm(padapter->recvpriv.signal_strength); 
++		#else
++		tmp_level = padapter->recvpriv.signal_strength;
++		#endif
++		
++		tmp_qual = padapter->recvpriv.signal_qual;
++		tmp_noise =padapter->recvpriv.noise;		
++		//DBG_871X("level:%d, qual:%d, noise:%d, rssi (%d)\n", tmp_level, tmp_qual, tmp_noise,padapter->recvpriv.rssi);
++
++		piwstats->qual.level = tmp_level;
++		piwstats->qual.qual = tmp_qual;
++		piwstats->qual.noise = tmp_noise;
++	}
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,14))
++	piwstats->qual.updated = IW_QUAL_ALL_UPDATED ;//|IW_QUAL_DBM;
++#else
++#ifdef RTK_DMP_PLATFORM
++	//IW_QUAL_DBM= 0x8, if driver use this flag, wireless extension will show value of dbm.
++	//remove this flag for show percentage 0~100
++	piwstats->qual.updated = 0x07;
++#else
++	piwstats->qual.updated = 0x0f;
++#endif
++#endif
++
++	#ifdef CONFIG_SIGNAL_DISPLAY_DBM
++	piwstats->qual.updated = piwstats->qual.updated | IW_QUAL_DBM;
++	#endif
++
++	return &padapter->iwstats;
++}
++#endif
++
++#ifdef CONFIG_WIRELESS_EXT
++struct iw_handler_def rtw_handlers_def =
++{
++	.standard = rtw_handlers,
++	.num_standard = sizeof(rtw_handlers) / sizeof(iw_handler),
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,33)) || defined(CONFIG_WEXT_PRIV)
++	.private = rtw_private_handler,
++	.private_args = (struct iw_priv_args *)rtw_private_args,
++	.num_private = sizeof(rtw_private_handler) / sizeof(iw_handler),
++ 	.num_private_args = sizeof(rtw_private_args) / sizeof(struct iw_priv_args),
++#endif
++#if WIRELESS_EXT >= 17
++	.get_wireless_stats = rtw_get_wireless_stats,
++#endif
++};
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/os_dep/linux/mlme_linux.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/os_dep/linux/mlme_linux.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/os_dep/linux/mlme_linux.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/os_dep/linux/mlme_linux.c	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,586 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++
++
++#define _MLME_OSDEP_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <mlme_osdep.h>
++
++
++#ifdef RTK_DMP_PLATFORM
++void Linkup_workitem_callback(struct work_struct *work)
++{
++	struct mlme_priv *pmlmepriv = container_of(work, struct mlme_priv, Linkup_workitem);
++	_adapter *padapter = container_of(pmlmepriv, _adapter, mlmepriv);
++
++_func_enter_;
++
++	RT_TRACE(_module_mlme_osdep_c_,_drv_info_,("+ Linkup_workitem_callback\n"));
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,12))
++	kobject_uevent(&padapter->pnetdev->dev.kobj, KOBJ_LINKUP);
++#else
++	kobject_hotplug(&padapter->pnetdev->class_dev.kobj, KOBJ_LINKUP);
++#endif
++
++_func_exit_;
++}
++
++void Linkdown_workitem_callback(struct work_struct *work)
++{
++	struct mlme_priv *pmlmepriv = container_of(work, struct mlme_priv, Linkdown_workitem);
++	_adapter *padapter = container_of(pmlmepriv, _adapter, mlmepriv);
++
++_func_enter_;
++
++	RT_TRACE(_module_mlme_osdep_c_,_drv_info_,("+ Linkdown_workitem_callback\n"));
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,12))
++	kobject_uevent(&padapter->pnetdev->dev.kobj, KOBJ_LINKDOWN);
++#else
++	kobject_hotplug(&padapter->pnetdev->class_dev.kobj, KOBJ_LINKDOWN);
++#endif
++
++_func_exit_;
++}
++#endif
++
++
++/*
++void sitesurvey_ctrl_handler(void *FunctionContext)
++{
++	_adapter *adapter = (_adapter *)FunctionContext;
++
++	_sitesurvey_ctrl_handler(adapter);
++
++	_set_timer(&adapter->mlmepriv.sitesurveyctrl.sitesurvey_ctrl_timer, 3000);
++}
++*/
++
++void rtw_join_timeout_handler (void *FunctionContext)
++{
++	_adapter *adapter = (_adapter *)FunctionContext;
++	_rtw_join_timeout_handler(adapter);
++}
++
++
++void _rtw_scan_timeout_handler (void *FunctionContext)
++{
++	_adapter *adapter = (_adapter *)FunctionContext;
++	rtw_scan_timeout_handler(adapter);
++}
++
++
++void _dynamic_check_timer_handlder (void *FunctionContext)
++{
++	_adapter *adapter = (_adapter *)FunctionContext;
++		 
++	rtw_dynamic_check_timer_handlder(adapter);
++	
++	_set_timer(&adapter->mlmepriv.dynamic_chk_timer, 2000);
++}
++
++#ifdef CONFIG_SET_SCAN_DENY_TIMER
++void _rtw_set_scan_deny_timer_hdl(void *FunctionContext)
++{
++	_adapter *adapter = (_adapter *)FunctionContext;	 
++	rtw_set_scan_deny_timer_hdl(adapter);
++}
++#endif
++
++
++void rtw_init_mlme_timer(_adapter *padapter)
++{
++	struct	mlme_priv *pmlmepriv = &padapter->mlmepriv;
++
++	_init_timer(&(pmlmepriv->assoc_timer), padapter->pnetdev, rtw_join_timeout_handler, padapter);
++	//_init_timer(&(pmlmepriv->sitesurveyctrl.sitesurvey_ctrl_timer), padapter->pnetdev, sitesurvey_ctrl_handler, padapter);
++	_init_timer(&(pmlmepriv->scan_to_timer), padapter->pnetdev, _rtw_scan_timeout_handler, padapter);
++
++	_init_timer(&(pmlmepriv->dynamic_chk_timer), padapter->pnetdev, _dynamic_check_timer_handlder, padapter);
++
++	#ifdef CONFIG_SET_SCAN_DENY_TIMER
++	_init_timer(&(pmlmepriv->set_scan_deny_timer), padapter->pnetdev, _rtw_set_scan_deny_timer_hdl, padapter);
++	#endif
++
++#ifdef RTK_DMP_PLATFORM
++	_init_workitem(&(pmlmepriv->Linkup_workitem), Linkup_workitem_callback, padapter);
++	_init_workitem(&(pmlmepriv->Linkdown_workitem), Linkdown_workitem_callback, padapter);
++#endif
++
++}
++
++extern void rtw_indicate_wx_assoc_event(_adapter *padapter);
++extern void rtw_indicate_wx_disassoc_event(_adapter *padapter);
++
++void rtw_os_indicate_connect(_adapter *adapter)
++{
++
++_func_enter_;	
++
++#ifdef CONFIG_IOCTL_CFG80211
++	rtw_cfg80211_indicate_connect(adapter);
++#endif //CONFIG_IOCTL_CFG80211
++
++	rtw_indicate_wx_assoc_event(adapter);
++	netif_carrier_on(adapter->pnetdev);
++
++	if(adapter->pid[2] !=0)
++		rtw_signal_process(adapter->pid[2], SIGALRM);
++
++#ifdef RTK_DMP_PLATFORM
++	_set_workitem(&adapter->mlmepriv.Linkup_workitem);
++#endif
++
++_func_exit_;	
++
++}
++
++extern void indicate_wx_scan_complete_event(_adapter *padapter);
++void rtw_os_indicate_scan_done( _adapter *padapter, bool aborted)
++{
++#ifdef CONFIG_IOCTL_CFG80211
++	rtw_cfg80211_indicate_scan_done(wdev_to_priv(padapter->rtw_wdev), aborted);
++#endif
++	indicate_wx_scan_complete_event(padapter);
++}
++
++static RT_PMKID_LIST   backupPMKIDList[ NUM_PMKID_CACHE ];
++void rtw_reset_securitypriv( _adapter *adapter )
++{
++	u8	backupPMKIDIndex = 0;
++	u8	backupTKIPCountermeasure = 0x00;
++	u32	backupTKIPcountermeasure_time = 0;
++	// add for CONFIG_IEEE80211W, none 11w also can use
++	_irqL irqL;
++	struct mlme_ext_priv	*pmlmeext = &adapter->mlmeextpriv;
++	
++	_enter_critical_bh(&adapter->security_key_mutex, &irqL);
++	
++	if(adapter->securitypriv.dot11AuthAlgrthm == dot11AuthAlgrthm_8021X)//802.1x
++	{		 
++		// Added by Albert 2009/02/18
++		// We have to backup the PMK information for WiFi PMK Caching test item.
++		//
++		// Backup the btkip_countermeasure information.
++		// When the countermeasure is trigger, the driver have to disconnect with AP for 60 seconds.
++
++		_rtw_memset( &backupPMKIDList[ 0 ], 0x00, sizeof( RT_PMKID_LIST ) * NUM_PMKID_CACHE );
++
++		_rtw_memcpy( &backupPMKIDList[ 0 ], &adapter->securitypriv.PMKIDList[ 0 ], sizeof( RT_PMKID_LIST ) * NUM_PMKID_CACHE );
++		backupPMKIDIndex = adapter->securitypriv.PMKIDIndex;
++		backupTKIPCountermeasure = adapter->securitypriv.btkip_countermeasure;
++		backupTKIPcountermeasure_time = adapter->securitypriv.btkip_countermeasure_time;		
++#ifdef CONFIG_IEEE80211W
++		//reset RX BIP packet number
++		pmlmeext->mgnt_80211w_IPN_rx = 0;
++#endif //CONFIG_IEEE80211W
++		_rtw_memset((unsigned char *)&adapter->securitypriv, 0, sizeof (struct security_priv));
++		//_init_timer(&(adapter->securitypriv.tkip_timer),adapter->pnetdev, rtw_use_tkipkey_handler, adapter);
++
++		// Added by Albert 2009/02/18
++		// Restore the PMK information to securitypriv structure for the following connection.
++		_rtw_memcpy( &adapter->securitypriv.PMKIDList[ 0 ], &backupPMKIDList[ 0 ], sizeof( RT_PMKID_LIST ) * NUM_PMKID_CACHE );
++		adapter->securitypriv.PMKIDIndex = backupPMKIDIndex;
++		adapter->securitypriv.btkip_countermeasure = backupTKIPCountermeasure;
++		adapter->securitypriv.btkip_countermeasure_time = backupTKIPcountermeasure_time;		
++
++		adapter->securitypriv.ndisauthtype = Ndis802_11AuthModeOpen;
++		adapter->securitypriv.ndisencryptstatus = Ndis802_11WEPDisabled;
++
++	}
++	else //reset values in securitypriv 
++	{
++		//if(adapter->mlmepriv.fw_state & WIFI_STATION_STATE)
++		//{
++		struct security_priv *psec_priv=&adapter->securitypriv;
++
++		psec_priv->dot11AuthAlgrthm =dot11AuthAlgrthm_Open;  //open system
++		psec_priv->dot11PrivacyAlgrthm = _NO_PRIVACY_;
++		psec_priv->dot11PrivacyKeyIndex = 0;
++
++		psec_priv->dot118021XGrpPrivacy = _NO_PRIVACY_;
++		psec_priv->dot118021XGrpKeyid = 1;
++
++		psec_priv->ndisauthtype = Ndis802_11AuthModeOpen;
++		psec_priv->ndisencryptstatus = Ndis802_11WEPDisabled;
++		//}
++	}
++	// add for CONFIG_IEEE80211W, none 11w also can use
++	_exit_critical_bh(&adapter->security_key_mutex, &irqL);
++}
++
++void rtw_os_indicate_disconnect( _adapter *adapter )
++{
++   //RT_PMKID_LIST   backupPMKIDList[ NUM_PMKID_CACHE ];
++  
++_func_enter_;
++
++	netif_carrier_off(adapter->pnetdev); // Do it first for tx broadcast pkt after disconnection issue!
++
++#ifdef CONFIG_IOCTL_CFG80211
++	rtw_cfg80211_indicate_disconnect(adapter); 	
++#endif //CONFIG_IOCTL_CFG80211
++
++	rtw_indicate_wx_disassoc_event(adapter);	
++
++#ifdef RTK_DMP_PLATFORM
++	_set_workitem(&adapter->mlmepriv.Linkdown_workitem);
++#endif
++	 //modify for CONFIG_IEEE80211W, none 11w also can use the same command
++	 rtw_reset_securitypriv_cmd(adapter);
++
++_func_exit_;
++
++}
++
++void rtw_report_sec_ie(_adapter *adapter,u8 authmode,u8 *sec_ie)
++{
++	uint	len;
++	u8	*buff,*p,i;
++	union iwreq_data wrqu;
++
++_func_enter_;
++
++	RT_TRACE(_module_mlme_osdep_c_,_drv_info_,("+rtw_report_sec_ie, authmode=%d\n", authmode));
++
++	buff = NULL;
++	if(authmode==_WPA_IE_ID_)
++	{
++		RT_TRACE(_module_mlme_osdep_c_,_drv_info_,("rtw_report_sec_ie, authmode=%d\n", authmode));
++		
++		buff = rtw_malloc(IW_CUSTOM_MAX);
++		
++		_rtw_memset(buff,0,IW_CUSTOM_MAX);
++		
++		p=buff;
++		
++		p+=sprintf(p,"ASSOCINFO(ReqIEs=");
++
++		len = sec_ie[1]+2;
++		len =  (len < IW_CUSTOM_MAX) ? len:IW_CUSTOM_MAX;
++			
++		for(i=0;i<len;i++){
++			p+=sprintf(p,"%02x",sec_ie[i]);
++		}
++
++		p+=sprintf(p,")");
++		
++		_rtw_memset(&wrqu,0,sizeof(wrqu));
++		
++		wrqu.data.length=p-buff;
++		
++		wrqu.data.length = (wrqu.data.length<IW_CUSTOM_MAX) ? wrqu.data.length:IW_CUSTOM_MAX;
++		
++		wireless_send_event(adapter->pnetdev,IWEVCUSTOM,&wrqu,buff);
++
++		if(buff)
++		    rtw_mfree(buff, IW_CUSTOM_MAX);
++		
++	}
++
++_func_exit_;
++
++}
++
++void _survey_timer_hdl (void *FunctionContext)
++{
++	_adapter *padapter = (_adapter *)FunctionContext;
++	
++	survey_timer_hdl(padapter);
++}
++
++void _link_timer_hdl (void *FunctionContext)
++{
++	_adapter *padapter = (_adapter *)FunctionContext;
++	link_timer_hdl(padapter);
++}
++
++void _addba_timer_hdl(void *FunctionContext)
++{
++	struct sta_info *psta = (struct sta_info *)FunctionContext;
++	addba_timer_hdl(psta);
++}
++
++#ifdef CONFIG_IEEE80211W
++void _sa_query_timer_hdl (void *FunctionContext)
++{
++	_adapter *padapter = (_adapter *)FunctionContext;
++	sa_query_timer_hdl(padapter);
++}
++#endif //CONFIG_IEEE80211W
++
++void init_addba_retry_timer(_adapter *padapter, struct sta_info *psta)
++{
++
++	_init_timer(&psta->addba_retry_timer, padapter->pnetdev, _addba_timer_hdl, psta);
++}
++
++/*
++void _reauth_timer_hdl(void *FunctionContext)
++{
++	_adapter *padapter = (_adapter *)FunctionContext;
++	reauth_timer_hdl(padapter);
++}
++
++void _reassoc_timer_hdl(void *FunctionContext)
++{
++	_adapter *padapter = (_adapter *)FunctionContext;
++	reassoc_timer_hdl(padapter);
++}
++*/
++
++void init_mlme_ext_timer(_adapter *padapter)
++{	
++	struct	mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
++
++	_init_timer(&pmlmeext->survey_timer, padapter->pnetdev, _survey_timer_hdl, padapter);
++	_init_timer(&pmlmeext->link_timer, padapter->pnetdev, _link_timer_hdl, padapter);
++#ifdef CONFIG_IEEE80211W
++	_init_timer(&pmlmeext->sa_query_timer, padapter->pnetdev, _sa_query_timer_hdl, padapter);
++#endif //CONFIG_IEEE80211W
++	//_init_timer(&pmlmeext->ADDBA_timer, padapter->pnetdev, _addba_timer_hdl, padapter);
++
++	//_init_timer(&pmlmeext->reauth_timer, padapter->pnetdev, _reauth_timer_hdl, padapter);
++	//_init_timer(&pmlmeext->reassoc_timer, padapter->pnetdev, _reassoc_timer_hdl, padapter);
++}
++
++#ifdef CONFIG_AP_MODE
++
++void rtw_indicate_sta_assoc_event(_adapter *padapter, struct sta_info *psta)
++{
++	union iwreq_data wrqu;
++	struct sta_priv *pstapriv = &padapter->stapriv;
++
++	if(psta==NULL)
++		return;
++
++	if(psta->aid > NUM_STA)
++		return;
++
++	if(pstapriv->sta_aid[psta->aid - 1] != psta)
++		return;
++	
++	
++	wrqu.addr.sa_family = ARPHRD_ETHER;	
++	
++	_rtw_memcpy(wrqu.addr.sa_data, psta->hwaddr, ETH_ALEN);
++
++	DBG_871X("+rtw_indicate_sta_assoc_event\n");
++	
++	wireless_send_event(padapter->pnetdev, IWEVREGISTERED, &wrqu, NULL);
++
++}
++
++void rtw_indicate_sta_disassoc_event(_adapter *padapter, struct sta_info *psta)
++{
++	union iwreq_data wrqu;
++	struct sta_priv *pstapriv = &padapter->stapriv;
++
++	if(psta==NULL)
++		return;
++
++	if(psta->aid > NUM_STA)
++		return;
++
++	if(pstapriv->sta_aid[psta->aid - 1] != psta)
++		return;
++	
++	
++	wrqu.addr.sa_family = ARPHRD_ETHER;	
++	
++	_rtw_memcpy(wrqu.addr.sa_data, psta->hwaddr, ETH_ALEN);
++
++	DBG_871X("+rtw_indicate_sta_disassoc_event\n");
++	
++	wireless_send_event(padapter->pnetdev, IWEVEXPIRED, &wrqu, NULL);
++	
++}
++
++
++#ifdef CONFIG_HOSTAPD_MLME
++
++static int mgnt_xmit_entry(struct sk_buff *skb, struct net_device *pnetdev)
++{
++	struct hostapd_priv *phostapdpriv = rtw_netdev_priv(pnetdev);
++	_adapter *padapter = (_adapter *)phostapdpriv->padapter;
++
++	//DBG_871X("%s\n", __FUNCTION__);
++
++	return rtw_hal_hostap_mgnt_xmit_entry(padapter, skb);
++}
++
++static int mgnt_netdev_open(struct net_device *pnetdev)
++{
++	struct hostapd_priv *phostapdpriv = rtw_netdev_priv(pnetdev);
++
++	DBG_871X("mgnt_netdev_open: MAC Address:" MAC_FMT "\n", MAC_ARG(pnetdev->dev_addr));
++
++
++	init_usb_anchor(&phostapdpriv->anchored);
++	
++ 	if(!rtw_netif_queue_stopped(pnetdev))
++      		rtw_netif_start_queue(pnetdev);
++	else
++		rtw_netif_wake_queue(pnetdev);
++
++
++	netif_carrier_on(pnetdev);
++		
++	//rtw_write16(phostapdpriv->padapter, 0x0116, 0x0100);//only excluding beacon 
++		
++	return 0;	
++}
++static int mgnt_netdev_close(struct net_device *pnetdev)
++{
++	struct hostapd_priv *phostapdpriv = rtw_netdev_priv(pnetdev);
++
++	DBG_871X("%s\n", __FUNCTION__);
++
++	usb_kill_anchored_urbs(&phostapdpriv->anchored);
++
++	netif_carrier_off(pnetdev);
++
++	if (!rtw_netif_queue_stopped(pnetdev))
++		rtw_netif_stop_queue(pnetdev);
++	
++	//rtw_write16(phostapdpriv->padapter, 0x0116, 0x3f3f);
++	
++	return 0;	
++}
++
++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,29))
++static const struct net_device_ops rtl871x_mgnt_netdev_ops = {
++	.ndo_open = mgnt_netdev_open,
++       .ndo_stop = mgnt_netdev_close,
++       .ndo_start_xmit = mgnt_xmit_entry,
++       //.ndo_set_mac_address = r871x_net_set_mac_address,
++       //.ndo_get_stats = r871x_net_get_stats,
++       //.ndo_do_ioctl = r871x_mp_ioctl,
++};
++#endif
++
++int hostapd_mode_init(_adapter *padapter)
++{
++	unsigned char mac[ETH_ALEN];
++	struct hostapd_priv *phostapdpriv;
++	struct net_device *pnetdev;
++	
++	pnetdev = rtw_alloc_etherdev(sizeof(struct hostapd_priv));	
++	if (!pnetdev)
++	   return -ENOMEM;
++
++	//SET_MODULE_OWNER(pnetdev);
++       ether_setup(pnetdev);
++
++	//pnetdev->type = ARPHRD_IEEE80211;
++	
++	phostapdpriv = rtw_netdev_priv(pnetdev);
++	phostapdpriv->pmgnt_netdev = pnetdev;
++	phostapdpriv->padapter= padapter;
++	padapter->phostapdpriv = phostapdpriv;
++	
++	//pnetdev->init = NULL;
++	
++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,29))
++
++	DBG_871X("register rtl871x_mgnt_netdev_ops to netdev_ops\n");
++
++	pnetdev->netdev_ops = &rtl871x_mgnt_netdev_ops;
++	
++#else
++
++	pnetdev->open = mgnt_netdev_open;
++
++	pnetdev->stop = mgnt_netdev_close;	
++	
++	pnetdev->hard_start_xmit = mgnt_xmit_entry;
++	
++	//pnetdev->set_mac_address = r871x_net_set_mac_address;
++	
++	//pnetdev->get_stats = r871x_net_get_stats;
++
++	//pnetdev->do_ioctl = r871x_mp_ioctl;
++	
++#endif
++
++	pnetdev->watchdog_timeo = HZ; /* 1 second timeout */	
++
++	//pnetdev->wireless_handlers = NULL;
++
++#ifdef CONFIG_TCP_CSUM_OFFLOAD_TX
++	pnetdev->features |= NETIF_F_IP_CSUM;
++#endif	
++
++	
++	
++	if(dev_alloc_name(pnetdev,"mgnt.wlan%d") < 0)
++	{
++		DBG_871X("hostapd_mode_init(): dev_alloc_name, fail! \n");		
++	}
++
++
++	//SET_NETDEV_DEV(pnetdev, pintfpriv->udev);
++
++
++	mac[0]=0x00;
++	mac[1]=0xe0;
++	mac[2]=0x4c;
++	mac[3]=0x87;
++	mac[4]=0x11;
++	mac[5]=0x12;
++				
++	_rtw_memcpy(pnetdev->dev_addr, mac, ETH_ALEN);
++	
++
++	netif_carrier_off(pnetdev);
++
++
++	/* Tell the network stack we exist */
++	if (register_netdev(pnetdev) != 0)
++	{
++		DBG_871X("hostapd_mode_init(): register_netdev fail!\n");
++		
++		if(pnetdev)
++      		{	 
++			rtw_free_netdev(pnetdev);
++      		}
++	}
++	
++	return 0;
++	
++}
++
++void hostapd_mode_unload(_adapter *padapter)
++{
++	struct hostapd_priv *phostapdpriv = padapter->phostapdpriv;
++	struct net_device *pnetdev = phostapdpriv->pmgnt_netdev;
++
++	unregister_netdev(pnetdev);
++	rtw_free_netdev(pnetdev);
++	
++}
++
++#endif
++#endif
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/os_dep/linux/os_intfs.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/os_dep/linux/os_intfs.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/os_dep/linux/os_intfs.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/os_dep/linux/os_intfs.c	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,2762 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _OS_INTFS_C_
++
++#include <drv_conf.h>
++
++#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS)
++
++#error "Shall be Linux or Windows, but not both!\n"
++
++#endif
++
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <xmit_osdep.h>
++#include <recv_osdep.h>
++#include <hal_intf.h>
++#include <rtw_ioctl.h>
++#include <rtw_version.h>
++
++#ifdef CONFIG_USB_HCI
++#include <usb_osintf.h>
++#endif
++
++#ifdef CONFIG_PCI_HCI
++#include <pci_osintf.h>
++#endif
++
++#ifdef CONFIG_BR_EXT
++#include <rtw_br_ext.h>
++#endif //CONFIG_BR_EXT
++
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("Realtek Wireless Lan Driver");
++MODULE_AUTHOR("Realtek Semiconductor Corp.");
++MODULE_VERSION(DRIVERVERSION);
++
++/* module param defaults */
++int rtw_chip_version = 0x00;
++int rtw_rfintfs = HWPI;
++int rtw_lbkmode = 0;//RTL8712_AIR_TRX;
++
++
++int rtw_network_mode = Ndis802_11IBSS;//Ndis802_11Infrastructure;//infra, ad-hoc, auto
++//NDIS_802_11_SSID	ssid;
++int rtw_channel = 1;//ad-hoc support requirement
++int rtw_wireless_mode = WIRELESS_11BG_24N;
++int rtw_vrtl_carrier_sense = AUTO_VCS;
++int rtw_vcs_type = RTS_CTS;//*
++int rtw_rts_thresh = 2347;//*
++int rtw_frag_thresh = 2346;//*
++int rtw_preamble = PREAMBLE_LONG;//long, short, auto
++int rtw_scan_mode = 1;//active, passive
++int rtw_adhoc_tx_pwr = 1;
++int rtw_soft_ap = 0;
++//int smart_ps = 1;
++#ifdef CONFIG_POWER_SAVING
++int rtw_power_mgnt = 1;
++#ifdef CONFIG_IPS_LEVEL_2
++int rtw_ips_mode = IPS_LEVEL_2;
++#else
++int rtw_ips_mode = IPS_NORMAL;
++#endif
++#else
++int rtw_power_mgnt = PS_MODE_ACTIVE;
++int rtw_ips_mode = IPS_NONE;
++#endif
++module_param(rtw_ips_mode, int, 0644);
++MODULE_PARM_DESC(rtw_ips_mode,"The default IPS mode");
++
++int rtw_radio_enable = 1;
++int rtw_long_retry_lmt = 7;
++int rtw_short_retry_lmt = 7;
++int rtw_busy_thresh = 40;
++//int qos_enable = 0; //*
++int rtw_ack_policy = NORMAL_ACK;
++#ifdef CONFIG_MP_INCLUDED
++int rtw_mp_mode = 1;
++#else
++int rtw_mp_mode = 0;
++#endif
++int rtw_software_encrypt = 0;
++int rtw_software_decrypt = 0;
++
++int rtw_acm_method = 0;// 0:By SW 1:By HW.
++
++int rtw_wmm_enable = 1;// default is set to enable the wmm.
++int rtw_uapsd_enable = 0;
++int rtw_uapsd_max_sp = NO_LIMIT;
++int rtw_uapsd_acbk_en = 0;
++int rtw_uapsd_acbe_en = 0;
++int rtw_uapsd_acvi_en = 0;
++int rtw_uapsd_acvo_en = 0;
++
++#ifdef CONFIG_80211N_HT
++int rtw_ht_enable = 1;
++int rtw_cbw40_enable = 3; // 0 :diable, bit(0): enable 2.4g, bit(1): enable 5g
++int rtw_ampdu_enable = 1;//for enable tx_ampdu
++int rtw_rx_stbc = 1;// 0: disable, bit(0):enable 2.4g, bit(1):enable 5g, default is set to enable 2.4GHZ for IOT issue with bufflao's AP at 5GHZ
++int rtw_ampdu_amsdu = 0;// 0: disabled, 1:enabled, 2:auto
++#endif
++
++int rtw_lowrate_two_xmit = 1;//Use 2 path Tx to transmit MCS0~7 and legacy mode
++
++//int rf_config = RF_1T2R;  // 1T2R
++int rtw_rf_config = RF_819X_MAX_TYPE;  //auto
++int rtw_low_power = 0;
++#ifdef CONFIG_WIFI_TEST
++int rtw_wifi_spec = 1;//for wifi test
++#else
++int rtw_wifi_spec = 0;
++#endif
++
++int rtw_special_rf_path = 0; //0: 2T2R ,1: only turn on path A 1T1R, 2: only turn on path B 1T1R
++
++int rtw_channel_plan = RT_CHANNEL_DOMAIN_MAX;
++
++#ifdef CONFIG_BT_COEXIST
++int rtw_bt_iso = 2;// 0:Low, 1:High, 2:From Efuse
++int rtw_bt_sco = 3;// 0:Idle, 1:None-SCO, 2:SCO, 3:From Counter, 4.Busy, 5.OtherBusy
++int rtw_bt_ampdu =1 ;// 0:Disable BT control A-MPDU, 1:Enable BT control A-MPDU.
++#endif
++int rtw_AcceptAddbaReq = _TRUE;// 0:Reject AP's Add BA req, 1:Accept AP's Add BA req.
++
++int  rtw_antdiv_cfg = 2; // 0:OFF , 1:ON, 2:decide by Efuse config
++
++#ifdef CONFIG_USB_AUTOSUSPEND
++int rtw_enusbss = 1;//0:disable,1:enable
++#else
++int rtw_enusbss = 0;//0:disable,1:enable
++#endif
++
++int rtw_hwpdn_mode=2;//0:disable,1:enable,2: by EFUSE config
++
++#ifdef CONFIG_HW_PWRP_DETECTION
++int rtw_hwpwrp_detect = 1;
++#else
++int rtw_hwpwrp_detect = 0; //HW power  ping detect 0:disable , 1:enable
++#endif
++
++#ifdef CONFIG_USB_HCI
++int rtw_hw_wps_pbc = 1;
++#else
++int rtw_hw_wps_pbc = 0;
++#endif
++
++#ifdef CONFIG_TX_MCAST2UNI
++int rtw_mc2u_disable = 0;
++#endif	// CONFIG_TX_MCAST2UNI
++
++int rtw_mac_phy_mode = 0; //0:by efuse, 1:smsp, 2:dmdp, 3:dmsp.
++
++#ifdef CONFIG_80211D
++int rtw_80211d = 0;
++#endif
++
++char* ifname = "wlan%d";
++module_param(ifname, charp, 0644);
++MODULE_PARM_DESC(ifname, "The default name to allocate for first interface");
++
++char* if2name = "wlan%d";
++module_param(if2name, charp, 0644);
++MODULE_PARM_DESC(if2name, "The default name to allocate for second interface");
++
++char* rtw_initmac = 0;  // temp mac address if users want to use instead of the mac address in Efuse
++
++#ifdef CONFIG_MULTI_VIR_IFACES
++int rtw_ext_iface_num  = 1;//primary/secondary iface is excluded
++module_param(rtw_ext_iface_num, int, 0644);
++#endif //CONFIG_MULTI_VIR_IFACES
++
++module_param(rtw_initmac, charp, 0644);
++module_param(rtw_channel_plan, int, 0644);
++module_param(rtw_chip_version, int, 0644);
++module_param(rtw_rfintfs, int, 0644);
++module_param(rtw_lbkmode, int, 0644);
++module_param(rtw_network_mode, int, 0644);
++module_param(rtw_channel, int, 0644);
++module_param(rtw_mp_mode, int, 0644);
++module_param(rtw_wmm_enable, int, 0644);
++module_param(rtw_vrtl_carrier_sense, int, 0644);
++module_param(rtw_vcs_type, int, 0644);
++module_param(rtw_busy_thresh, int, 0644);
++#ifdef CONFIG_80211N_HT
++module_param(rtw_ht_enable, int, 0644);
++module_param(rtw_cbw40_enable, int, 0644);
++module_param(rtw_ampdu_enable, int, 0644);
++module_param(rtw_rx_stbc, int, 0644);
++module_param(rtw_ampdu_amsdu, int, 0644);
++#endif
++
++module_param(rtw_lowrate_two_xmit, int, 0644);
++
++module_param(rtw_rf_config, int, 0644);
++module_param(rtw_power_mgnt, int, 0644);
++module_param(rtw_low_power, int, 0644);
++module_param(rtw_wifi_spec, int, 0644);
++
++module_param(rtw_special_rf_path, int, 0644);
++
++module_param(rtw_antdiv_cfg, int, 0644);
++
++
++module_param(rtw_enusbss, int, 0644);
++module_param(rtw_hwpdn_mode, int, 0644);
++module_param(rtw_hwpwrp_detect, int, 0644);
++
++module_param(rtw_hw_wps_pbc, int, 0644);
++
++#ifdef CONFIG_ADAPTOR_INFO_CACHING_FILE
++char *rtw_adaptor_info_caching_file_path= "/data/misc/wifi/rtw_cache";
++module_param(rtw_adaptor_info_caching_file_path, charp, 0644);
++MODULE_PARM_DESC(rtw_adaptor_info_caching_file_path, "The path of adapter info cache file");
++#endif //CONFIG_ADAPTOR_INFO_CACHING_FILE
++
++#ifdef CONFIG_LAYER2_ROAMING
++uint rtw_max_roaming_times=2;
++module_param(rtw_max_roaming_times, uint, 0644);
++MODULE_PARM_DESC(rtw_max_roaming_times,"The max roaming times to try");
++#endif //CONFIG_LAYER2_ROAMING
++
++#ifdef CONFIG_IOL
++bool rtw_force_iol=_FALSE;
++module_param(rtw_force_iol, bool, 0644);
++MODULE_PARM_DESC(rtw_force_iol,"Force to enable IOL");
++#endif //CONFIG_IOL
++
++#ifdef CONFIG_FILE_FWIMG
++char *rtw_fw_file_path= "";
++module_param(rtw_fw_file_path, charp, 0644);
++MODULE_PARM_DESC(rtw_fw_file_path, "The path of fw image");
++#endif //CONFIG_FILE_FWIMG
++
++#ifdef CONFIG_TX_MCAST2UNI
++module_param(rtw_mc2u_disable, int, 0644);
++#endif	// CONFIG_TX_MCAST2UNI
++
++module_param(rtw_mac_phy_mode, int, 0644);
++
++#ifdef CONFIG_80211D
++module_param(rtw_80211d, int, 0644);
++#endif
++
++uint rtw_notch_filter = RTW_NOTCH_FILTER;
++module_param(rtw_notch_filter, uint, 0644);
++MODULE_PARM_DESC(rtw_notch_filter, "0:Disable, 1:Enable, 2:Enable only for P2P");
++
++static uint loadparam( _adapter *padapter,  _nic_hdl	pnetdev);
++int _netdev_open(struct net_device *pnetdev);
++int netdev_open (struct net_device *pnetdev);
++static int netdev_close (struct net_device *pnetdev);
++
++//#ifdef RTK_DMP_PLATFORM
++#ifdef CONFIG_PROC_DEBUG
++#define RTL8192C_PROC_NAME "rtl819xC"
++#define RTL8192D_PROC_NAME "rtl819xD"
++static char rtw_proc_name[IFNAMSIZ];
++static struct proc_dir_entry *rtw_proc = NULL;
++static int	rtw_proc_cnt = 0;
++
++#define RTW_PROC_NAME DRV_NAME
++
++#ifndef create_proc_entry
++/* dummy routines */
++void rtw_proc_remove_one(struct net_device *dev)
++{
++}
++
++void rtw_proc_init_one(struct net_device *dev)
++{
++}
++
++#else	/* create_proc_entry not defined */
++
++void rtw_proc_init_one(struct net_device *dev)
++{
++	struct proc_dir_entry *dir_dev = NULL;
++	struct proc_dir_entry *entry=NULL;
++	_adapter	*padapter = rtw_netdev_priv(dev);
++	u8 rf_type;
++
++	if(rtw_proc == NULL)
++	{
++		if(padapter->chip_type == RTL8188C_8192C)
++		{
++			_rtw_memcpy(rtw_proc_name, RTL8192C_PROC_NAME, sizeof(RTL8192C_PROC_NAME));
++		}
++		else if(padapter->chip_type == RTL8192D)
++		{
++			_rtw_memcpy(rtw_proc_name, RTL8192D_PROC_NAME, sizeof(RTL8192D_PROC_NAME));
++		}
++		else if(padapter->chip_type == RTL8723A)
++		{
++			_rtw_memcpy(rtw_proc_name, RTW_PROC_NAME, sizeof(RTW_PROC_NAME));
++		}
++		else if(padapter->chip_type == RTL8188E)
++		{
++			_rtw_memcpy(rtw_proc_name, RTW_PROC_NAME, sizeof(RTW_PROC_NAME));
++		}
++		else
++		{
++			_rtw_memcpy(rtw_proc_name, RTW_PROC_NAME, sizeof(RTW_PROC_NAME));
++		}
++
++#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
++		rtw_proc=create_proc_entry(rtw_proc_name, S_IFDIR, proc_net);
++#else
++		rtw_proc=create_proc_entry(rtw_proc_name, S_IFDIR, init_net.proc_net);
++#endif
++		if (rtw_proc == NULL) {
++			DBG_871X(KERN_ERR "Unable to create rtw_proc directory\n");
++			return;
++		}
++
++		entry = create_proc_read_entry("ver_info", S_IFREG | S_IRUGO, rtw_proc, proc_get_drv_version, dev);
++		if (!entry) {
++			DBG_871X("Unable to create_proc_read_entry!\n");
++			return;
++		}
++
++		entry = create_proc_read_entry("log_level", S_IFREG | S_IRUGO,
++				   rtw_proc, proc_get_log_level, dev);
++		if (!entry) {
++			DBG_871X("Unable to create_proc_read_entry!\n");
++			return;
++		}
++		entry->write_proc = proc_set_log_level;
++		
++#ifdef DBG_MEM_ALLOC
++		entry = create_proc_read_entry("mstat", S_IFREG | S_IRUGO,
++				   rtw_proc, proc_get_mstat, dev);
++		if (!entry) {
++			DBG_871X("Unable to create_proc_read_entry!\n");
++			return;
++		}
++#endif /* DBG_MEM_ALLOC */
++	}
++
++
++
++	if(padapter->dir_dev == NULL)
++	{
++		padapter->dir_dev = create_proc_entry(dev->name,
++					  S_IFDIR | S_IRUGO | S_IXUGO,
++					  rtw_proc);
++
++		dir_dev = padapter->dir_dev;
++
++		if(dir_dev==NULL)
++		{
++			if(rtw_proc_cnt == 0)
++			{
++				if(rtw_proc){
++#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
++					remove_proc_entry(rtw_proc_name, proc_net);
++#else
++					remove_proc_entry(rtw_proc_name, init_net.proc_net);
++#endif
++					rtw_proc = NULL;
++				}
++			}
++
++			DBG_871X("Unable to create dir_dev directory\n");
++			return;
++		}
++	}
++	else
++	{
++		return;
++	}
++
++	rtw_proc_cnt++;
++
++	entry = create_proc_read_entry("write_reg", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_write_reg, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++	entry->write_proc = proc_set_write_reg;
++
++	entry = create_proc_read_entry("read_reg", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_read_reg, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++	entry->write_proc = proc_set_read_reg;
++
++
++	entry = create_proc_read_entry("fwstate", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_fwstate, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++
++
++	entry = create_proc_read_entry("sec_info", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_sec_info, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++
++
++	entry = create_proc_read_entry("mlmext_state", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_mlmext_state, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++
++
++	entry = create_proc_read_entry("qos_option", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_qos_option, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++
++	entry = create_proc_read_entry("ht_option", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_ht_option, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++
++	entry = create_proc_read_entry("rf_info", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_rf_info, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++
++	entry = create_proc_read_entry("ap_info", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_ap_info, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++
++	entry = create_proc_read_entry("adapter_state", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_adapter_state, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++
++	entry = create_proc_read_entry("trx_info", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_trx_info, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++
++	entry = create_proc_read_entry("mac_reg_dump1", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_mac_reg_dump1, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++
++	entry = create_proc_read_entry("mac_reg_dump2", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_mac_reg_dump2, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++
++	entry = create_proc_read_entry("mac_reg_dump3", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_mac_reg_dump3, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++
++	entry = create_proc_read_entry("bb_reg_dump1", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_bb_reg_dump1, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++
++	entry = create_proc_read_entry("bb_reg_dump2", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_bb_reg_dump2, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++
++	entry = create_proc_read_entry("bb_reg_dump3", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_bb_reg_dump3, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++
++	entry = create_proc_read_entry("rf_reg_dump1", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_rf_reg_dump1, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++
++	entry = create_proc_read_entry("rf_reg_dump2", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_rf_reg_dump2, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++
++	rtw_hal_get_hwreg(padapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type));
++	if((RF_1T2R == rf_type) ||(RF_1T1R ==rf_type ))	{
++		entry = create_proc_read_entry("rf_reg_dump3", S_IFREG | S_IRUGO,
++					   dir_dev, proc_get_rf_reg_dump3, dev);
++		if (!entry) {
++			DBG_871X("Unable to create_proc_read_entry!\n");
++			return;
++		}
++
++		entry = create_proc_read_entry("rf_reg_dump4", S_IFREG | S_IRUGO,
++					   dir_dev, proc_get_rf_reg_dump4, dev);
++		if (!entry) {
++			DBG_871X("Unable to create_proc_read_entry!\n");
++			return;
++		}
++	}
++
++#ifdef CONFIG_AP_MODE
++
++	entry = create_proc_read_entry("all_sta_info", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_all_sta_info, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++#endif
++
++#ifdef DBG_MEMORY_LEAK
++	entry = create_proc_read_entry("_malloc_cnt", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_malloc_cnt, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++#endif
++
++#ifdef CONFIG_FIND_BEST_CHANNEL
++	entry = create_proc_read_entry("best_channel", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_best_channel, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++	entry->write_proc = proc_set_best_channel;
++#endif
++
++	entry = create_proc_read_entry("rx_signal", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_rx_signal, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++	entry->write_proc = proc_set_rx_signal;
++
++	entry = create_proc_read_entry("ht_enable", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_ht_enable, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++	entry->write_proc = proc_set_ht_enable;
++
++	entry = create_proc_read_entry("cbw40_enable", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_cbw40_enable, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++	entry->write_proc = proc_set_cbw40_enable;
++
++	entry = create_proc_read_entry("ampdu_enable", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_ampdu_enable, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++	entry->write_proc = proc_set_ampdu_enable;
++
++	entry = create_proc_read_entry("rx_stbc", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_rx_stbc, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++	entry->write_proc = proc_set_rx_stbc;
++
++
++	entry = create_proc_read_entry("path_rssi", S_IFREG | S_IRUGO,
++					dir_dev, proc_get_two_path_rssi, dev);
++
++	entry = create_proc_read_entry("vid", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_vid, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++
++	entry = create_proc_read_entry("pid", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_pid, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++
++	entry = create_proc_read_entry("rssi_disp", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_rssi_disp, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++	entry->write_proc = proc_set_rssi_disp;
++
++#if defined(DBG_CONFIG_ERROR_DETECT)
++	entry = create_proc_read_entry("sreset", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_sreset, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++	entry->write_proc = proc_set_sreset;
++#endif /* DBG_CONFIG_ERROR_DETECT */
++
++#ifdef CONFIG_DM_ADAPTIVITY
++	entry = create_proc_read_entry("dm_adaptivity", S_IFREG | S_IRUGO,
++				   dir_dev, proc_get_dm_adaptivity, dev);
++	if (!entry) {
++		DBG_871X("Unable to create_proc_read_entry!\n");
++		return;
++	}
++	entry->write_proc = proc_set_dm_adaptivity;
++#endif /* CONFIG_DM_ADAPTIVITY */
++
++}
++
++void rtw_proc_remove_one(struct net_device *dev)
++{
++	struct proc_dir_entry *dir_dev = NULL;
++	_adapter	*padapter = rtw_netdev_priv(dev);
++	u8 rf_type;
++
++	dir_dev = padapter->dir_dev;
++	padapter->dir_dev = NULL;
++
++	if (dir_dev) {
++
++		remove_proc_entry("write_reg", dir_dev);
++		remove_proc_entry("read_reg", dir_dev);
++		remove_proc_entry("fwstate", dir_dev);
++		remove_proc_entry("sec_info", dir_dev);
++		remove_proc_entry("mlmext_state", dir_dev);
++		remove_proc_entry("qos_option", dir_dev);
++		remove_proc_entry("ht_option", dir_dev);
++		remove_proc_entry("rf_info", dir_dev);
++		remove_proc_entry("ap_info", dir_dev);
++		remove_proc_entry("adapter_state", dir_dev);
++		remove_proc_entry("trx_info", dir_dev);
++
++		remove_proc_entry("mac_reg_dump1", dir_dev);
++		remove_proc_entry("mac_reg_dump2", dir_dev);
++		remove_proc_entry("mac_reg_dump3", dir_dev);
++		remove_proc_entry("bb_reg_dump1", dir_dev);
++		remove_proc_entry("bb_reg_dump2", dir_dev);
++		remove_proc_entry("bb_reg_dump3", dir_dev);
++		remove_proc_entry("rf_reg_dump1", dir_dev);
++		remove_proc_entry("rf_reg_dump2", dir_dev);
++		rtw_hal_get_hwreg(padapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type));
++		if((RF_1T2R == rf_type) ||(RF_1T1R ==rf_type ))	{
++			remove_proc_entry("rf_reg_dump3", dir_dev);
++			remove_proc_entry("rf_reg_dump4", dir_dev);
++		}
++#ifdef CONFIG_AP_MODE
++		remove_proc_entry("all_sta_info", dir_dev);
++#endif
++
++#ifdef DBG_MEMORY_LEAK
++		remove_proc_entry("_malloc_cnt", dir_dev);
++#endif
++
++#ifdef CONFIG_FIND_BEST_CHANNEL
++		remove_proc_entry("best_channel", dir_dev);
++#endif
++		remove_proc_entry("rx_signal", dir_dev);
++
++		remove_proc_entry("cbw40_enable", dir_dev);
++
++		remove_proc_entry("ht_enable", dir_dev);
++
++		remove_proc_entry("ampdu_enable", dir_dev);
++
++		remove_proc_entry("rx_stbc", dir_dev);
++
++		remove_proc_entry("path_rssi", dir_dev);
++
++		remove_proc_entry("vid", dir_dev);
++
++		remove_proc_entry("pid", dir_dev);
++
++		remove_proc_entry("rssi_disp", dir_dev);
++
++#if defined(DBG_CONFIG_ERROR_DETECT)
++		remove_proc_entry("sreset", dir_dev);
++#endif /* DBG_CONFIG_ERROR_DETECT */
++
++#ifdef CONFIG_DM_ADAPTIVITY
++		remove_proc_entry("dm_adaptivity", dir_dev);
++#endif
++
++		remove_proc_entry(dev->name, rtw_proc);
++		dir_dev = NULL;
++
++	}
++	else
++	{
++		return;
++	}
++
++	rtw_proc_cnt--;
++
++	if(rtw_proc_cnt == 0)
++	{
++		if(rtw_proc){
++			remove_proc_entry("ver_info", rtw_proc);
++
++			remove_proc_entry("log_level", rtw_proc);
++			#ifdef DBG_MEM_ALLOC
++			remove_proc_entry("mstat", rtw_proc);
++			#endif /* DBG_MEM_ALLOC */
++#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
++			remove_proc_entry(rtw_proc_name, proc_net);
++#else
++			remove_proc_entry(rtw_proc_name, init_net.proc_net);
++#endif
++			rtw_proc = NULL;
++		}
++	}
++}
++#endif  /* create_proc_entry not defined */
++#endif
++
++uint loadparam( _adapter *padapter,  _nic_hdl	pnetdev);
++uint loadparam( _adapter *padapter,  _nic_hdl	pnetdev)
++{
++
++	uint status = _SUCCESS;
++	struct registry_priv  *registry_par = &padapter->registrypriv;
++
++_func_enter_;
++
++	registry_par->chip_version = (u8)rtw_chip_version;
++	registry_par->rfintfs = (u8)rtw_rfintfs;
++	registry_par->lbkmode = (u8)rtw_lbkmode;
++	//registry_par->hci = (u8)hci;
++	registry_par->network_mode  = (u8)rtw_network_mode;
++
++	_rtw_memcpy(registry_par->ssid.Ssid, "ANY", 3);
++	registry_par->ssid.SsidLength = 3;
++
++	registry_par->channel = (u8)rtw_channel;
++	registry_par->wireless_mode = (u8)rtw_wireless_mode;
++	registry_par->vrtl_carrier_sense = (u8)rtw_vrtl_carrier_sense ;
++	registry_par->vcs_type = (u8)rtw_vcs_type;
++	registry_par->rts_thresh=(u16)rtw_rts_thresh;
++	registry_par->frag_thresh=(u16)rtw_frag_thresh;
++	registry_par->preamble = (u8)rtw_preamble;
++	registry_par->scan_mode = (u8)rtw_scan_mode;
++	registry_par->adhoc_tx_pwr = (u8)rtw_adhoc_tx_pwr;
++	registry_par->soft_ap=  (u8)rtw_soft_ap;
++	//registry_par->smart_ps =  (u8)rtw_smart_ps;
++	registry_par->power_mgnt = (u8)rtw_power_mgnt;
++	registry_par->ips_mode = (u8)rtw_ips_mode;
++	registry_par->radio_enable = (u8)rtw_radio_enable;
++	registry_par->long_retry_lmt = (u8)rtw_long_retry_lmt;
++	registry_par->short_retry_lmt = (u8)rtw_short_retry_lmt;
++  	registry_par->busy_thresh = (u16)rtw_busy_thresh;
++  	//registry_par->qos_enable = (u8)rtw_qos_enable;
++	registry_par->ack_policy = (u8)rtw_ack_policy;
++	registry_par->mp_mode = (u8)rtw_mp_mode;
++	registry_par->software_encrypt = (u8)rtw_software_encrypt;
++	registry_par->software_decrypt = (u8)rtw_software_decrypt;
++
++	registry_par->acm_method = (u8)rtw_acm_method;
++
++	 //UAPSD
++	registry_par->wmm_enable = (u8)rtw_wmm_enable;
++	registry_par->uapsd_enable = (u8)rtw_uapsd_enable;
++	registry_par->uapsd_max_sp = (u8)rtw_uapsd_max_sp;
++	registry_par->uapsd_acbk_en = (u8)rtw_uapsd_acbk_en;
++	registry_par->uapsd_acbe_en = (u8)rtw_uapsd_acbe_en;
++	registry_par->uapsd_acvi_en = (u8)rtw_uapsd_acvi_en;
++	registry_par->uapsd_acvo_en = (u8)rtw_uapsd_acvo_en;
++
++#ifdef CONFIG_80211N_HT
++	registry_par->ht_enable = (u8)rtw_ht_enable;
++	registry_par->cbw40_enable = (u8)rtw_cbw40_enable;
++	registry_par->ampdu_enable = (u8)rtw_ampdu_enable;
++	registry_par->rx_stbc = (u8)rtw_rx_stbc;
++	registry_par->ampdu_amsdu = (u8)rtw_ampdu_amsdu;
++#endif
++
++	registry_par->lowrate_two_xmit = (u8)rtw_lowrate_two_xmit;
++	registry_par->rf_config = (u8)rtw_rf_config;
++	registry_par->low_power = (u8)rtw_low_power;
++
++
++	registry_par->wifi_spec = (u8)rtw_wifi_spec;
++	registry_par->special_rf_path = (u8)rtw_special_rf_path;
++	registry_par->channel_plan = (u8)rtw_channel_plan;
++
++#ifdef CONFIG_BT_COEXIST
++	registry_par->bt_iso = (u8)rtw_bt_iso;
++	registry_par->bt_sco = (u8)rtw_bt_sco;
++	registry_par->bt_ampdu = (u8)rtw_bt_ampdu;
++#endif
++	registry_par->bAcceptAddbaReq = (u8)rtw_AcceptAddbaReq;
++
++	registry_par->antdiv_cfg = (u8)rtw_antdiv_cfg;
++
++#ifdef CONFIG_AUTOSUSPEND
++	registry_par->usbss_enable = (u8)rtw_enusbss;//0:disable,1:enable
++#endif
++#ifdef SUPPORT_HW_RFOFF_DETECTED
++	registry_par->hwpdn_mode = (u8)rtw_hwpdn_mode;//0:disable,1:enable,2:by EFUSE config
++	registry_par->hwpwrp_detect = (u8)rtw_hwpwrp_detect;//0:disable,1:enable
++#endif
++
++	registry_par->hw_wps_pbc = (u8)rtw_hw_wps_pbc;
++
++#ifdef CONFIG_ADAPTOR_INFO_CACHING_FILE
++	snprintf(registry_par->adaptor_info_caching_file_path, PATH_LENGTH_MAX, "%s", rtw_adaptor_info_caching_file_path);
++	registry_par->adaptor_info_caching_file_path[PATH_LENGTH_MAX-1]=0;
++#endif
++
++#ifdef CONFIG_LAYER2_ROAMING
++	registry_par->max_roaming_times = (u8)rtw_max_roaming_times;
++#ifdef CONFIG_INTEL_WIDI
++	registry_par->max_roaming_times = (u8)rtw_max_roaming_times + 2;
++#endif // CONFIG_INTEL_WIDI
++#endif
++
++#ifdef CONFIG_IOL
++	registry_par->force_iol = rtw_force_iol;
++#endif
++
++	registry_par->mac_phy_mode = rtw_mac_phy_mode;
++
++#ifdef CONFIG_80211D
++	registry_par->enable80211d = (u8)rtw_80211d;
++#endif
++
++	snprintf(registry_par->ifname, 16, "%s", ifname);
++	snprintf(registry_par->if2name, 16, "%s", if2name);
++
++	registry_par->notch_filter = (u8)rtw_notch_filter;
++
++#ifdef CONFIG_MULTI_VIR_IFACES
++	registry_par->ext_iface_num = (u8)rtw_ext_iface_num;
++#endif //CONFIG_MULTI_VIR_IFACES
++
++_func_exit_;
++
++	return status;
++}
++
++static int rtw_net_set_mac_address(struct net_device *pnetdev, void *p)
++{
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(pnetdev);
++	struct sockaddr *addr = p;
++
++	if(padapter->bup == _FALSE)
++	{
++		//DBG_871X("r8711_net_set_mac_address(), MAC=%x:%x:%x:%x:%x:%x\n", addr->sa_data[0], addr->sa_data[1], addr->sa_data[2], addr->sa_data[3],
++		//addr->sa_data[4], addr->sa_data[5]);
++		_rtw_memcpy(padapter->eeprompriv.mac_addr, addr->sa_data, ETH_ALEN);
++		//_rtw_memcpy(pnetdev->dev_addr, addr->sa_data, ETH_ALEN);
++		//padapter->bset_hwaddr = _TRUE;
++	}
++
++	return 0;
++}
++
++static struct net_device_stats *rtw_net_get_stats(struct net_device *pnetdev)
++{
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(pnetdev);
++	struct xmit_priv *pxmitpriv = &(padapter->xmitpriv);
++	struct recv_priv *precvpriv = &(padapter->recvpriv);
++
++	padapter->stats.tx_packets = pxmitpriv->tx_pkts;//pxmitpriv->tx_pkts++;
++	padapter->stats.rx_packets = precvpriv->rx_pkts;//precvpriv->rx_pkts++;
++	padapter->stats.tx_dropped = pxmitpriv->tx_drop;
++	padapter->stats.rx_dropped = precvpriv->rx_drop;
++	padapter->stats.tx_bytes = pxmitpriv->tx_bytes;
++	padapter->stats.rx_bytes = precvpriv->rx_bytes;
++
++	return &padapter->stats;
++}
++
++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35))
++/*
++ * AC to queue mapping
++ *
++ * AC_VO -> queue 0
++ * AC_VI -> queue 1
++ * AC_BE -> queue 2
++ * AC_BK -> queue 3
++ */
++static const u16 rtw_1d_to_queue[8] = { 2, 3, 3, 2, 1, 1, 0, 0 };
++
++/* Given a data frame determine the 802.1p/1d tag to use. */
++unsigned int rtw_classify8021d(struct sk_buff *skb)
++{
++	unsigned int dscp;
++
++	/* skb->priority values from 256->263 are magic values to
++	 * directly indicate a specific 802.1d priority.  This is used
++	 * to allow 802.1d priority to be passed directly in from VLAN
++	 * tags, etc.
++	 */
++	if (skb->priority >= 256 && skb->priority <= 263)
++		return skb->priority - 256;
++
++	switch (skb->protocol) {
++	case htons(ETH_P_IP):
++		dscp = ip_hdr(skb)->tos & 0xfc;
++		break;
++	default:
++		return 0;
++	}
++
++	return dscp >> 5;
++}
++
++static u16 rtw_select_queue(struct net_device *dev, struct sk_buff *skb)
++{
++	_adapter	*padapter = rtw_netdev_priv(dev);
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++
++	skb->priority = rtw_classify8021d(skb);
++
++	if(pmlmepriv->acm_mask != 0)
++	{
++		skb->priority = qos_acm(pmlmepriv->acm_mask, skb->priority);
++	}
++
++	return rtw_1d_to_queue[skb->priority];
++}
++
++u16 rtw_recv_select_queue(struct sk_buff *skb)
++{
++	struct iphdr *piphdr;
++	unsigned int dscp;
++	u16	eth_type;
++	u32 priority;
++	u8 *pdata = skb->data;
++
++	_rtw_memcpy(&eth_type, pdata+(ETH_ALEN<<1), 2);
++
++	switch (eth_type) {
++		case htons(ETH_P_IP):
++
++			piphdr = (struct iphdr *)(pdata+ETH_HLEN);
++
++			dscp = piphdr->tos & 0xfc;
++
++			priority = dscp >> 5;
++
++			break;
++		default:
++			priority = 0;
++	}
++
++	return rtw_1d_to_queue[priority];
++
++}
++
++#endif
++
++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,29))
++static const struct net_device_ops rtw_netdev_ops = {
++	.ndo_open = netdev_open,
++	.ndo_stop = netdev_close,
++	.ndo_start_xmit = rtw_xmit_entry,
++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35))
++	.ndo_select_queue	= rtw_select_queue,
++#endif
++	.ndo_set_mac_address = rtw_net_set_mac_address,
++	.ndo_get_stats = rtw_net_get_stats,
++	.ndo_do_ioctl = rtw_ioctl,
++};
++#endif
++
++int rtw_init_netdev_name(struct net_device *pnetdev, const char *ifname)
++{
++	_adapter *padapter = rtw_netdev_priv(pnetdev);
++
++#ifdef CONFIG_EASY_REPLACEMENT
++	struct net_device	*TargetNetdev = NULL;
++	_adapter			*TargetAdapter = NULL;
++	struct net 		*devnet = NULL;
++
++	if(padapter->bDongle == 1)
++	{
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
++		TargetNetdev = dev_get_by_name("wlan0");
++#else
++	#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26))
++		devnet = pnetdev->nd_net;
++	#else
++		devnet = dev_net(pnetdev);
++	#endif
++		TargetNetdev = dev_get_by_name(devnet, "wlan0");
++#endif
++		if(TargetNetdev) {
++			DBG_871X("Force onboard module driver disappear !!!\n");
++			TargetAdapter = rtw_netdev_priv(TargetNetdev);
++			TargetAdapter->DriverState = DRIVER_DISAPPEAR;
++
++			padapter->pid[0] = TargetAdapter->pid[0];
++			padapter->pid[1] = TargetAdapter->pid[1];
++			padapter->pid[2] = TargetAdapter->pid[2];
++
++			dev_put(TargetNetdev);
++			unregister_netdev(TargetNetdev);
++
++			if(TargetAdapter->chip_type == padapter->chip_type)
++				rtw_proc_remove_one(TargetNetdev);
++
++			padapter->DriverState = DRIVER_REPLACE_DONGLE;
++		}
++	}
++#endif //CONFIG_EASY_REPLACEMENT
++
++	if(dev_alloc_name(pnetdev, ifname) < 0)
++	{
++		RT_TRACE(_module_os_intfs_c_,_drv_err_,("dev_alloc_name, fail! \n"));
++	}
++
++	netif_carrier_off(pnetdev);
++	//rtw_netif_stop_queue(pnetdev);
++
++	return 0;
++}
++
++struct net_device *rtw_init_netdev(_adapter *old_padapter)
++{
++	_adapter *padapter;
++	struct net_device *pnetdev;
++
++	RT_TRACE(_module_os_intfs_c_,_drv_info_,("+init_net_dev\n"));
++
++	if(old_padapter != NULL)
++		pnetdev = rtw_alloc_etherdev_with_old_priv(sizeof(_adapter), (void *)old_padapter);
++	else
++		pnetdev = rtw_alloc_etherdev(sizeof(_adapter));
++
++	if (!pnetdev)
++		return NULL;
++
++	padapter = rtw_netdev_priv(pnetdev);
++	padapter->pnetdev = pnetdev;
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)
++	SET_MODULE_OWNER(pnetdev);
++#endif
++
++	//pnetdev->init = NULL;
++
++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,29))
++	DBG_871X("register rtw_netdev_ops to netdev_ops\n");
++	pnetdev->netdev_ops = &rtw_netdev_ops;
++#else
++	pnetdev->open = netdev_open;
++	pnetdev->stop = netdev_close;
++	pnetdev->hard_start_xmit = rtw_xmit_entry;
++	pnetdev->set_mac_address = rtw_net_set_mac_address;
++	pnetdev->get_stats = rtw_net_get_stats;
++	pnetdev->do_ioctl = rtw_ioctl;
++#endif
++
++
++#ifdef CONFIG_TCP_CSUM_OFFLOAD_TX
++	pnetdev->features |= NETIF_F_IP_CSUM;
++#endif
++	//pnetdev->tx_timeout = NULL;
++	pnetdev->watchdog_timeo = HZ*3; /* 3 second timeout */
++#ifdef CONFIG_WIRELESS_EXT
++	pnetdev->wireless_handlers = (struct iw_handler_def *)&rtw_handlers_def;
++#endif
++
++#ifdef WIRELESS_SPY
++	//priv->wireless_data.spy_data = &priv->spy_data;
++	//pnetdev->wireless_data = &priv->wireless_data;
++#endif
++
++	//step 2.
++   	loadparam(padapter, pnetdev);
++
++	return pnetdev;
++
++}
++
++void rtw_unregister_netdevs(struct dvobj_priv *dvobj)
++{
++	int i;
++	_adapter *padapter = NULL;
++
++	for (i=0;i<dvobj->iface_nums;i++) {
++		struct net_device *pnetdev = NULL;
++
++		padapter = dvobj->padapters[i];
++
++		if (padapter == NULL)
++			continue;
++
++		pnetdev = padapter->pnetdev;
++
++		if((padapter->DriverState != DRIVER_DISAPPEAR) && pnetdev) {
++			unregister_netdev(pnetdev); //will call netdev_close()
++			rtw_proc_remove_one(pnetdev);
++		}
++
++		#ifdef CONFIG_IOCTL_CFG80211
++		rtw_wdev_unregister(padapter->rtw_wdev);
++		#endif
++	}
++
++}
++
++u32 rtw_start_drv_threads(_adapter *padapter)
++{
++
++	u32 _status = _SUCCESS;
++
++	RT_TRACE(_module_os_intfs_c_,_drv_info_,("+rtw_start_drv_threads\n"));
++#ifdef CONFIG_XMIT_THREAD_MODE
++	padapter->xmitThread = kthread_run(rtw_xmit_thread, padapter, "RTW_XMIT_THREAD");
++	if(IS_ERR(padapter->xmitThread))
++		_status = _FAIL;
++#endif
++
++#ifdef CONFIG_RECV_THREAD_MODE
++	padapter->recvThread = kthread_run(rtw_recv_thread, padapter, "RTW_RECV_THREAD");
++	if(IS_ERR(padapter->recvThread))
++		_status = _FAIL;
++#endif
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if(padapter->isprimary == _TRUE)
++#endif //CONFIG_CONCURRENT_MODE
++	{
++		padapter->cmdThread = kthread_run(rtw_cmd_thread, padapter, "RTW_CMD_THREAD");
++		if(IS_ERR(padapter->cmdThread))
++			_status = _FAIL;
++		else
++			_rtw_down_sema(&padapter->cmdpriv.terminate_cmdthread_sema); //wait for cmd_thread to run
++	}
++
++
++#ifdef CONFIG_EVENT_THREAD_MODE
++	padapter->evtThread = kthread_run(event_thread, padapter, "RTW_EVENT_THREAD");
++	if(IS_ERR(padapter->evtThread))
++		_status = _FAIL;
++#endif
++
++	return _status;
++
++}
++
++void rtw_stop_drv_threads (_adapter *padapter)
++{
++	RT_TRACE(_module_os_intfs_c_,_drv_info_,("+rtw_stop_drv_threads\n"));
++
++#ifdef CONFIG_CONCURRENT_MODE
++	if(padapter->isprimary == _TRUE)
++#endif //CONFIG_CONCURRENT_MODE
++	{
++		rtw_stop_cmd_thread(padapter);
++	}
++
++#ifdef CONFIG_EVENT_THREAD_MODE
++        _rtw_up_sema(&padapter->evtpriv.evt_notify);
++	if(padapter->evtThread){
++		_rtw_down_sema(&padapter->evtpriv.terminate_evtthread_sema);
++	}
++#endif
++
++#ifdef CONFIG_XMIT_THREAD_MODE
++	// Below is to termindate tx_thread...
++	_rtw_up_sema(&padapter->xmitpriv.xmit_sema);
++	_rtw_down_sema(&padapter->xmitpriv.terminate_xmitthread_sema);
++	RT_TRACE(_module_os_intfs_c_,_drv_info_,("\n drv_halt: rtw_xmit_thread can be terminated ! \n"));
++#endif
++
++#ifdef CONFIG_RECV_THREAD_MODE
++	// Below is to termindate rx_thread...
++	_rtw_up_sema(&padapter->recvpriv.recv_sema);
++	_rtw_down_sema(&padapter->recvpriv.terminate_recvthread_sema);
++	RT_TRACE(_module_os_intfs_c_,_drv_info_,("\n drv_halt:recv_thread can be terminated! \n"));
++#endif
++
++
++}
++
++u8 rtw_init_default_value(_adapter *padapter);
++u8 rtw_init_default_value(_adapter *padapter)
++{
++	u8 ret  = _SUCCESS;
++	struct registry_priv* pregistrypriv = &padapter->registrypriv;
++	struct xmit_priv	*pxmitpriv = &padapter->xmitpriv;
++	struct mlme_priv *pmlmepriv= &padapter->mlmepriv;
++	struct security_priv *psecuritypriv = &padapter->securitypriv;
++
++	//xmit_priv
++	pxmitpriv->vcs_setting = pregistrypriv->vrtl_carrier_sense;
++	pxmitpriv->vcs = pregistrypriv->vcs_type;
++	pxmitpriv->vcs_type = pregistrypriv->vcs_type;
++	//pxmitpriv->rts_thresh = pregistrypriv->rts_thresh;
++	pxmitpriv->frag_len = pregistrypriv->frag_thresh;
++
++
++
++	//recv_priv
++
++
++	//mlme_priv
++	pmlmepriv->scan_interval = SCAN_INTERVAL;// 30*2 sec = 60sec
++	pmlmepriv->scan_mode = SCAN_ACTIVE;
++
++	//qos_priv
++	//pmlmepriv->qospriv.qos_option = pregistrypriv->wmm_enable;
++
++	//ht_priv
++#ifdef CONFIG_80211N_HT
++	pmlmepriv->htpriv.ampdu_enable = _FALSE;//set to disabled
++#endif
++
++	//security_priv
++	//rtw_get_encrypt_decrypt_from_registrypriv(padapter);
++	psecuritypriv->binstallGrpkey = _FAIL;
++	psecuritypriv->sw_encrypt=pregistrypriv->software_encrypt;
++	psecuritypriv->sw_decrypt=pregistrypriv->software_decrypt;
++
++	psecuritypriv->dot11AuthAlgrthm = dot11AuthAlgrthm_Open; //open system
++	psecuritypriv->dot11PrivacyAlgrthm = _NO_PRIVACY_;
++
++	psecuritypriv->dot11PrivacyKeyIndex = 0;
++
++	psecuritypriv->dot118021XGrpPrivacy = _NO_PRIVACY_;
++	psecuritypriv->dot118021XGrpKeyid = 1;
++
++	psecuritypriv->ndisauthtype = Ndis802_11AuthModeOpen;
++	psecuritypriv->ndisencryptstatus = Ndis802_11WEPDisabled;
++
++
++	//pwrctrl_priv
++
++
++	//registry_priv
++	rtw_init_registrypriv_dev_network(padapter);
++	rtw_update_registrypriv_dev_network(padapter);
++
++
++	//hal_priv
++	rtw_hal_def_value_init(padapter);
++
++	//misc.
++	padapter->bReadPortCancel = _FALSE;
++	padapter->bWritePortCancel = _FALSE;
++	padapter->bRxRSSIDisplay = 0;
++	padapter->bForceWriteInitGain = 1;
++	padapter->bNotifyChannelChange = 0;
++#ifdef CONFIG_P2P
++	padapter->bShowGetP2PState = 1;
++#endif
++	return ret;
++}
++
++struct dvobj_priv *devobj_init(void)
++{
++	struct dvobj_priv *pdvobj = NULL;
++
++	if ((pdvobj = (struct dvobj_priv*)rtw_zmalloc(sizeof(*pdvobj))) == NULL)
++		return NULL;
++
++	_rtw_mutex_init(&pdvobj->hw_init_mutex);
++	_rtw_mutex_init(&pdvobj->h2c_fwcmd_mutex);
++	_rtw_mutex_init(&pdvobj->setch_mutex);
++	_rtw_mutex_init(&pdvobj->setbw_mutex);
++
++	pdvobj->processing_dev_remove = _FALSE;
++
++	return pdvobj;
++}
++
++void devobj_deinit(struct dvobj_priv *pdvobj)
++{
++	if(!pdvobj)
++		return;
++
++	_rtw_mutex_free(&pdvobj->hw_init_mutex);
++	_rtw_mutex_free(&pdvobj->h2c_fwcmd_mutex);
++	_rtw_mutex_free(&pdvobj->setch_mutex);
++	_rtw_mutex_free(&pdvobj->setbw_mutex);
++
++	rtw_mfree((u8*)pdvobj, sizeof(*pdvobj));
++}	
++
++u8 rtw_reset_drv_sw(_adapter *padapter)
++{
++	u8	ret8=_SUCCESS;
++	struct mlme_priv *pmlmepriv= &padapter->mlmepriv;
++	struct pwrctrl_priv *pwrctrlpriv = &padapter->pwrctrlpriv;
++
++	//hal_priv
++	rtw_hal_def_value_init(padapter);
++	padapter->bReadPortCancel = _FALSE;
++	padapter->bWritePortCancel = _FALSE;
++	padapter->bRxRSSIDisplay = 0;
++	pmlmepriv->scan_interval = SCAN_INTERVAL;// 30*2 sec = 60sec
++
++	pwrctrlpriv->bips_processing = _FALSE;
++	pwrctrlpriv->rf_pwrstate = rf_on;
++
++	padapter->xmitpriv.tx_pkts = 0;
++	padapter->recvpriv.rx_pkts = 0;
++
++	pmlmepriv->LinkDetectInfo.bBusyTraffic = _FALSE;
++
++	_clr_fwstate_(pmlmepriv, _FW_UNDER_SURVEY |_FW_UNDER_LINKING);
++
++#ifdef CONFIG_AUTOSUSPEND
++	#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,22) && LINUX_VERSION_CODE<=KERNEL_VERSION(2,6,34))
++		adapter_to_dvobj(padapter)->pusbdev->autosuspend_disabled = 1;//autosuspend disabled by the user
++	#endif
++#endif
++
++#ifdef DBG_CONFIG_ERROR_DETECT
++	rtw_hal_sreset_reset_value(padapter);
++#endif
++	pwrctrlpriv->pwr_state_check_cnts = 0;
++
++	//mlmeextpriv
++	padapter->mlmeextpriv.sitesurvey_res.state= SCAN_DISABLE;
++
++#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS
++	rtw_set_signal_stat_timer(&padapter->recvpriv);
++#endif
++
++	return ret8;
++}
++
++
++u8 rtw_init_drv_sw(_adapter *padapter)
++{
++
++	u8	ret8=_SUCCESS;
++
++_func_enter_;
++
++	RT_TRACE(_module_os_intfs_c_,_drv_info_,("+rtw_init_drv_sw\n"));
++
++	if ((rtw_init_cmd_priv(&padapter->cmdpriv)) == _FAIL)
++	{
++		RT_TRACE(_module_os_intfs_c_,_drv_err_,("\n Can't init cmd_priv\n"));
++		ret8=_FAIL;
++		goto exit;
++	}
++
++	padapter->cmdpriv.padapter=padapter;
++
++	if ((rtw_init_evt_priv(&padapter->evtpriv)) == _FAIL)
++	{
++		RT_TRACE(_module_os_intfs_c_,_drv_err_,("\n Can't init evt_priv\n"));
++		ret8=_FAIL;
++		goto exit;
++	}
++
++
++	if (rtw_init_mlme_priv(padapter) == _FAIL)
++	{
++		RT_TRACE(_module_os_intfs_c_,_drv_err_,("\n Can't init mlme_priv\n"));
++		ret8=_FAIL;
++		goto exit;
++	}
++
++#ifdef CONFIG_P2P
++	rtw_init_wifidirect_timers(padapter);
++	init_wifidirect_info(padapter, P2P_ROLE_DISABLE);
++	reset_global_wifidirect_info(padapter);
++	#ifdef CONFIG_IOCTL_CFG80211
++	rtw_init_cfg80211_wifidirect_info(padapter);
++	#endif
++#ifdef CONFIG_WFD
++	if(rtw_init_wifi_display_info(padapter) == _FAIL)
++		RT_TRACE(_module_os_intfs_c_,_drv_err_,("\n Can't init init_wifi_display_info\n"));
++#endif
++#endif /* CONFIG_P2P */
++
++	if(init_mlme_ext_priv(padapter) == _FAIL)
++	{
++		RT_TRACE(_module_os_intfs_c_,_drv_err_,("\n Can't init mlme_ext_priv\n"));
++		ret8=_FAIL;
++		goto exit;
++	}
++
++#ifdef CONFIG_TDLS
++	if(rtw_init_tdls_info(padapter) == _FAIL)
++	{
++		DBG_871X("Can't rtw_init_tdls_info\n");
++		ret8=_FAIL;
++		goto exit;
++	}
++#endif //CONFIG_TDLS
++
++	if(_rtw_init_xmit_priv(&padapter->xmitpriv, padapter) == _FAIL)
++	{
++		DBG_871X("Can't _rtw_init_xmit_priv\n");
++		ret8=_FAIL;
++		goto exit;
++	}
++
++	if(_rtw_init_recv_priv(&padapter->recvpriv, padapter) == _FAIL)
++	{
++		DBG_871X("Can't _rtw_init_recv_priv\n");
++		ret8=_FAIL;
++		goto exit;
++	}
++	// add for CONFIG_IEEE80211W, none 11w also can use
++	_rtw_spinlock_init(&padapter->security_key_mutex);
++	
++	// We don't need to memset padapter->XXX to zero, because adapter is allocated by rtw_zvmalloc().
++	//_rtw_memset((unsigned char *)&padapter->securitypriv, 0, sizeof (struct security_priv));
++
++	//_init_timer(&(padapter->securitypriv.tkip_timer), padapter->pifp, rtw_use_tkipkey_handler, padapter);
++
++	if(_rtw_init_sta_priv(&padapter->stapriv) == _FAIL)
++	{
++		DBG_871X("Can't _rtw_init_sta_priv\n");
++		ret8=_FAIL;
++		goto exit;
++	}
++
++	padapter->stapriv.padapter = padapter;
++	padapter->setband = GHZ24_50;
++	rtw_init_bcmc_stainfo(padapter);
++
++	rtw_init_pwrctrl_priv(padapter);
++
++	//_rtw_memset((u8 *)&padapter->qospriv, 0, sizeof (struct qos_priv));//move to mlme_priv
++
++#ifdef CONFIG_MP_INCLUDED
++	if (init_mp_priv(padapter) == _FAIL) {
++		DBG_871X("%s: initialize MP private data Fail!\n", __func__);
++	}
++#endif
++
++	ret8 = rtw_init_default_value(padapter);
++
++	rtw_hal_dm_init(padapter);
++	rtw_hal_sw_led_init(padapter);
++
++#ifdef DBG_CONFIG_ERROR_DETECT
++	rtw_hal_sreset_init(padapter);
++#endif
++
++#ifdef CONFIG_INTEL_WIDI
++	if(rtw_init_intel_widi(padapter) == _FAIL)
++	{
++		DBG_871X("Can't rtw_init_intel_widi\n");
++		ret8=_FAIL;
++		goto exit;
++	}
++#endif //CONFIG_INTEL_WIDI
++
++#ifdef CONFIG_BR_EXT
++	_rtw_spinlock_init(&padapter->br_ext_lock);
++#endif	// CONFIG_BR_EXT
++
++exit:
++
++	RT_TRACE(_module_os_intfs_c_,_drv_info_,("-rtw_init_drv_sw\n"));
++
++	_func_exit_;
++
++	return ret8;
++
++}
++
++void rtw_cancel_all_timer(_adapter *padapter)
++{
++	RT_TRACE(_module_os_intfs_c_,_drv_info_,("+rtw_cancel_all_timer\n"));
++
++	_cancel_timer_ex(&padapter->mlmepriv.assoc_timer);
++	RT_TRACE(_module_os_intfs_c_,_drv_info_,("rtw_cancel_all_timer:cancel association timer complete! \n"));
++
++	//_cancel_timer_ex(&padapter->securitypriv.tkip_timer);
++	//RT_TRACE(_module_os_intfs_c_,_drv_info_,("rtw_cancel_all_timer:cancel tkip_timer! \n"));
++
++	_cancel_timer_ex(&padapter->mlmepriv.scan_to_timer);
++	RT_TRACE(_module_os_intfs_c_,_drv_info_,("rtw_cancel_all_timer:cancel scan_to_timer! \n"));
++
++	_cancel_timer_ex(&padapter->mlmepriv.dynamic_chk_timer);
++	RT_TRACE(_module_os_intfs_c_,_drv_info_,("rtw_cancel_all_timer:cancel dynamic_chk_timer! \n"));
++
++	// cancel sw led timer
++	rtw_hal_sw_led_deinit(padapter);
++	RT_TRACE(_module_os_intfs_c_,_drv_info_,("rtw_cancel_all_timer:cancel DeInitSwLeds! \n"));
++
++	_cancel_timer_ex(&padapter->pwrctrlpriv.pwr_state_check_timer);
++
++#ifdef CONFIG_IOCTL_CFG80211
++#ifdef CONFIG_P2P
++	_cancel_timer_ex(&padapter->cfg80211_wdinfo.remain_on_ch_timer);
++#endif //CONFIG_P2P
++#endif //CONFIG_IOCTL_CFG80211
++
++#ifdef CONFIG_SET_SCAN_DENY_TIMER
++	_cancel_timer_ex(&padapter->mlmepriv.set_scan_deny_timer);
++	rtw_clear_scan_deny(padapter);
++	RT_TRACE(_module_os_intfs_c_,_drv_info_,("rtw_cancel_all_timer:cancel set_scan_deny_timer! \n"));
++#endif
++
++#ifdef CONFIG_NEW_SIGNAL_STAT_PROCESS
++	_cancel_timer_ex(&padapter->recvpriv.signal_stat_timer);
++#endif
++
++	// cancel dm  timer
++	rtw_hal_dm_deinit(padapter);
++
++#ifdef CONFIG_PLATFORM_FS_MX61
++	msleep(50);
++#endif
++}
++
++u8 rtw_free_drv_sw(_adapter *padapter)
++{
++	RT_TRACE(_module_os_intfs_c_,_drv_info_,("==>rtw_free_drv_sw"));
++
++
++	//we can call rtw_p2p_enable here, but:
++	// 1. rtw_p2p_enable may have IO operation
++	// 2. rtw_p2p_enable is bundled with wext interface
++	#ifdef CONFIG_P2P
++	{
++		struct wifidirect_info *pwdinfo = &padapter->wdinfo;
++		if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
++		{
++			_cancel_timer_ex( &pwdinfo->find_phase_timer );
++			_cancel_timer_ex( &pwdinfo->restore_p2p_state_timer );
++			_cancel_timer_ex( &pwdinfo->pre_tx_scan_timer);
++#ifdef CONFIG_CONCURRENT_MODE
++			_cancel_timer_ex( &pwdinfo->ap_p2p_switch_timer );
++#endif // CONFIG_CONCURRENT_MODE
++			rtw_p2p_set_state(pwdinfo, P2P_STATE_NONE);
++		}
++	}
++	#endif
++	// add for CONFIG_IEEE80211W, none 11w also can use
++	_rtw_spinlock_free(&padapter->security_key_mutex);
++	
++#ifdef CONFIG_BR_EXT
++	_rtw_spinlock_free(&padapter->br_ext_lock);
++#endif	// CONFIG_BR_EXT
++
++#ifdef CONFIG_INTEL_WIDI
++	rtw_free_intel_widi(padapter);
++#endif //CONFIG_INTEL_WIDI
++
++	free_mlme_ext_priv(&padapter->mlmeextpriv);
++
++#ifdef CONFIG_TDLS
++	//rtw_free_tdls_info(&padapter->tdlsinfo);
++#endif //CONFIG_TDLS
++
++	rtw_free_cmd_priv(&padapter->cmdpriv);
++
++	rtw_free_evt_priv(&padapter->evtpriv);
++
++	rtw_free_mlme_priv(&padapter->mlmepriv);
++
++	//free_io_queue(padapter);
++
++	_rtw_free_xmit_priv(&padapter->xmitpriv);
++
++	_rtw_free_sta_priv(&padapter->stapriv); //will free bcmc_stainfo here
++
++	_rtw_free_recv_priv(&padapter->recvpriv);
++
++	rtw_free_pwrctrl_priv(padapter);
++
++	//rtw_mfree((void *)padapter, sizeof (padapter));
++
++#ifdef CONFIG_DRVEXT_MODULE
++	free_drvext(&padapter->drvextpriv);
++#endif
++
++	rtw_hal_free_data(padapter);
++
++	RT_TRACE(_module_os_intfs_c_,_drv_info_,("<==rtw_free_drv_sw\n"));
++
++	//free the old_pnetdev
++	if(padapter->rereg_nd_name_priv.old_pnetdev) {
++		free_netdev(padapter->rereg_nd_name_priv.old_pnetdev);
++		padapter->rereg_nd_name_priv.old_pnetdev = NULL;
++	}
++
++	// clear pbuddy_adapter to avoid access wrong pointer.
++	if(padapter->pbuddy_adapter != NULL)
++	{
++		padapter->pbuddy_adapter->pbuddy_adapter = NULL;
++	}
++
++	RT_TRACE(_module_os_intfs_c_,_drv_info_,("-rtw_free_drv_sw\n"));
++
++	return _SUCCESS;
++
++}
++
++#ifdef CONFIG_CONCURRENT_MODE
++
++#ifdef CONFIG_USB_HCI
++	#include <usb_hal.h>
++#endif
++
++#ifdef CONFIG_MULTI_VIR_IFACES
++int _netdev_vir_if_open(struct net_device *pnetdev)
++{
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(pnetdev);
++	_adapter *primary_padapter = GET_PRIMARY_ADAPTER(padapter);
++
++	DBG_871X(FUNC_NDEV_FMT" enter\n", FUNC_NDEV_ARG(pnetdev));
++
++	if(!primary_padapter)
++		goto _netdev_virtual_iface_open_error;
++
++	if(primary_padapter->bup == _FALSE || primary_padapter->hw_init_completed == _FALSE)
++	{
++		_netdev_open(primary_padapter->pnetdev);
++	}
++
++	if(padapter->bup == _FALSE && primary_padapter->bup == _TRUE &&
++		primary_padapter->hw_init_completed == _TRUE)
++	{
++		int i;
++
++		padapter->bDriverStopped = _FALSE;
++	 	padapter->bSurpriseRemoved = _FALSE;
++		padapter->bCardDisableWOHSM = _FALSE;
++
++		_rtw_memcpy(padapter->HalData, primary_padapter->HalData, padapter->hal_data_sz);
++
++		padapter->bFWReady = primary_padapter->bFWReady;
++
++		if(rtw_start_drv_threads(padapter) == _FAIL)
++		{
++			goto _netdev_virtual_iface_open_error;
++		}
++
++		padapter->dir_dev = NULL;
++		rtw_proc_init_one(pnetdev);
++
++#ifdef CONFIG_IOCTL_CFG80211
++		rtw_cfg80211_init_wiphy(padapter);
++#endif
++
++		padapter->bup = _TRUE;
++		padapter->hw_init_completed = _TRUE;
++
++		rtw_start_mbssid_cam(padapter);//start mbssid_cam after bup = _TRUE & hw_init_completed = _TRUE
++
++	}
++
++	padapter->net_closed = _FALSE;
++
++	_set_timer(&padapter->mlmepriv.dynamic_chk_timer, 2000);
++
++	if(!rtw_netif_queue_stopped(pnetdev))
++		rtw_netif_start_queue(pnetdev);
++	else
++		rtw_netif_wake_queue(pnetdev);
++
++
++	DBG_871X(FUNC_NDEV_FMT" exit\n", FUNC_NDEV_ARG(pnetdev));
++	return 0;
++
++_netdev_virtual_iface_open_error:
++
++	padapter->bup = _FALSE;
++
++	netif_carrier_off(pnetdev);
++	rtw_netif_stop_queue(pnetdev);
++
++	return (-1);
++
++}
++
++int netdev_vir_if_open(struct net_device *pnetdev)
++{
++	int ret;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(pnetdev);
++
++	_enter_critical_mutex(&(adapter_to_dvobj(padapter)->hw_init_mutex), NULL);
++	ret = _netdev_vir_if_open(pnetdev);
++	_exit_critical_mutex(&(adapter_to_dvobj(padapter)->hw_init_mutex), NULL);
++	return ret;
++}
++
++static int netdev_vir_if_close(struct net_device *pnetdev)
++{
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(pnetdev);
++
++	padapter->net_closed = _TRUE;
++
++	if(pnetdev)
++	{
++		if (!rtw_netif_queue_stopped(pnetdev))
++			rtw_netif_stop_queue(pnetdev);
++	}
++
++#ifdef CONFIG_IOCTL_CFG80211
++	rtw_scan_abort(padapter);
++	wdev_to_priv(padapter->rtw_wdev)->bandroid_scan = _FALSE;
++#endif
++
++	return 0;
++}
++
++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,29))
++static const struct net_device_ops rtw_netdev_vir_if_ops = {
++	 .ndo_open = netdev_vir_if_open,
++        .ndo_stop = netdev_vir_if_close,
++        .ndo_start_xmit = rtw_xmit_entry,
++        .ndo_set_mac_address = rtw_net_set_mac_address,
++        .ndo_get_stats = rtw_net_get_stats,
++        .ndo_do_ioctl = rtw_ioctl,
++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35))
++	.ndo_select_queue	= rtw_select_queue,
++#endif
++};
++#endif
++
++_adapter *rtw_drv_add_vir_if(_adapter *primary_padapter, void (*set_intf_ops)(struct _io_ops *pops))
++{
++
++	int res = _FAIL;
++	struct net_device *pnetdev=NULL;
++	_adapter *padapter = NULL;
++	struct dvobj_priv *pdvobjpriv;
++	u8 mac[ETH_ALEN];
++
++/*
++	if((primary_padapter->bup == _FALSE) ||
++		(rtw_buddy_adapter_up(primary_padapter) == _FALSE))
++	{
++		goto error_rtw_drv_add_iface;
++	}
++
++*/
++	/****** init netdev ******/
++	pnetdev = rtw_init_netdev(NULL);
++	if (!pnetdev)
++		goto error_rtw_drv_add_iface;
++
++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,29))
++	DBG_871X("register rtw_netdev_virtual_iface_ops to netdev_ops\n");
++	pnetdev->netdev_ops = &rtw_netdev_vir_if_ops;
++#else
++	pnetdev->open = netdev_vir_if_open;
++	pnetdev->stop = netdev_vir_if_close;
++#endif
++
++#ifdef CONFIG_NO_WIRELESS_HANDLERS
++	pnetdev->wireless_handlers = NULL;
++#endif
++
++	/****** init adapter ******/
++	padapter = rtw_netdev_priv(pnetdev);
++	_rtw_memcpy(padapter, primary_padapter, sizeof(_adapter));
++
++	//
++	padapter->bup = _FALSE;
++	padapter->net_closed = _TRUE;
++	padapter->hw_init_completed = _FALSE;
++
++
++	//set adapter_type/iface type
++	padapter->isprimary = _FALSE;
++	padapter->adapter_type = MAX_ADAPTER;
++	padapter->pbuddy_adapter = primary_padapter;
++#if 0
++#ifndef CONFIG_HWPORT_SWAP	//Port0 -> Pri , Port1 -> Sec
++	padapter->iface_type = IFACE_PORT1;
++#else
++	padapter->iface_type = IFACE_PORT0;
++#endif  //CONFIG_HWPORT_SWAP
++#else
++	//extended virtual interfaces always are set to port0
++	padapter->iface_type = IFACE_PORT0;
++#endif
++	//
++	padapter->pnetdev = pnetdev;
++
++	/****** setup dvobj ******/
++	pdvobjpriv = adapter_to_dvobj(padapter);
++	padapter->iface_id = pdvobjpriv->iface_nums;
++	pdvobjpriv->padapters[pdvobjpriv->iface_nums++] = padapter;
++
++	SET_NETDEV_DEV(pnetdev, dvobj_to_dev(pdvobjpriv));
++#ifdef CONFIG_IOCTL_CFG80211
++	rtw_wdev_alloc(padapter, dvobj_to_dev(pdvobjpriv));
++#endif //CONFIG_IOCTL_CFG80211
++
++	//set interface_type/chip_type/HardwareType
++	padapter->interface_type = primary_padapter->interface_type;
++	padapter->chip_type = primary_padapter->chip_type;
++	padapter->HardwareType = primary_padapter->HardwareType;
++
++	//set hal data & hal ops
++#if defined(CONFIG_RTL8192C)
++	#if defined(CONFIG_PCI_HCI)
++		rtl8192ce_set_hal_ops(padapter);
++	#elif defined(CONFIG_USB_HCI)
++		rtl8192cu_set_hal_ops(padapter);
++	#endif
++#elif defined(CONFIG_RTL8192D)
++	#if defined(CONFIG_PCI_HCI)
++		rtl8192de_set_hal_ops(padapter);
++	#elif defined(CONFIG_USB_HCI)
++		rtl8192du_set_hal_ops(padapter);
++	#endif
++#endif
++
++	padapter->HalFunc.inirp_init = NULL;
++	padapter->HalFunc.inirp_deinit = NULL;
++	padapter->intf_start = NULL;
++	padapter->intf_stop = NULL;
++
++	//step init_io_priv
++	if ((rtw_init_io_priv(padapter, set_intf_ops)) == _FAIL) {
++		RT_TRACE(_module_hci_intfs_c_,_drv_err_,(" \n Can't init io_reqs\n"));
++	}
++
++	//step read_chip_version
++	rtw_hal_read_chip_version(padapter);
++
++	//step usb endpoint mapping
++	rtw_hal_chip_configure(padapter);
++
++
++	//init drv data
++	if(rtw_init_drv_sw(padapter)!= _SUCCESS)
++		goto error_rtw_drv_add_iface;
++
++
++	//get mac address from primary_padapter
++	_rtw_memcpy(mac, primary_padapter->eeprompriv.mac_addr, ETH_ALEN);
++
++	if (((mac[0]==0xff) &&(mac[1]==0xff) && (mac[2]==0xff) &&
++	     (mac[3]==0xff) && (mac[4]==0xff) &&(mac[5]==0xff)) ||
++	    ((mac[0]==0x0) && (mac[1]==0x0) && (mac[2]==0x0) &&
++	     (mac[3]==0x0) && (mac[4]==0x0) &&(mac[5]==0x0)))
++	{
++		mac[0] = 0x00;
++		mac[1] = 0xe0;
++		mac[2] = 0x4c;
++		mac[3] = 0x87;
++		mac[4] = 0x11;
++		mac[5] = 0x22;
++	}
++	else
++	{
++		//If the BIT1 is 0, the address is universally administered.
++		//If it is 1, the address is locally administered
++#if 1 //needs enable MBSSID CAM
++		mac[0] |= BIT(1); // locally administered
++		mac[0] |= (padapter->iface_id-1)<<4;
++#endif
++	}
++
++	_rtw_memcpy(padapter->eeprompriv.mac_addr, mac, ETH_ALEN);
++
++	padapter->dir_dev = NULL;
++
++	res = _SUCCESS;
++
++	return padapter;
++
++
++error_rtw_drv_add_iface:
++
++	if(padapter)
++		rtw_free_drv_sw(padapter);
++
++	if (pnetdev)
++		rtw_free_netdev(pnetdev);
++
++	return NULL;
++
++}
++
++void rtw_drv_stop_vir_if(_adapter *padapter)
++{
++	struct net_device *pnetdev=NULL;
++
++	if (padapter == NULL)
++		return;
++
++	pnetdev = padapter->pnetdev;
++
++	rtw_cancel_all_timer(padapter);
++
++	if(padapter->bup == _TRUE)
++	{
++		padapter->bDriverStopped = _TRUE;
++
++		#ifdef CONFIG_XMIT_ACK
++		if (padapter->xmitpriv.ack_tx)
++			rtw_ack_tx_done(&padapter->xmitpriv, RTW_SCTX_DONE_DRV_STOP);
++		#endif
++
++		if(padapter->intf_stop)
++		{
++			padapter->intf_stop(padapter);
++		}
++
++		rtw_stop_drv_threads(padapter);
++
++		padapter->bup = _FALSE;
++	}
++}
++
++void rtw_drv_free_vir_if(_adapter *padapter)
++{
++	struct net_device *pnetdev=NULL;
++
++	if (padapter == NULL)
++		return;
++
++	padapter->pbuddy_adapter = NULL;
++
++	pnetdev = padapter->pnetdev;
++
++#ifdef CONFIG_IOCTL_CFG80211
++	rtw_wdev_free(padapter->rtw_wdev);
++#endif //CONFIG_IOCTL_CFG80211
++
++	rtw_free_drv_sw(padapter);
++
++	rtw_free_netdev(pnetdev);
++}
++
++void rtw_drv_stop_vir_ifaces(struct dvobj_priv *dvobj)
++{
++	int i;
++	//struct dvobj_priv *dvobj = primary_padapter->dvobj;
++
++	for(i=2;i<dvobj->iface_nums;i++)
++	{
++		rtw_drv_stop_vir_if(dvobj->padapters[i]);
++	}
++}
++
++void rtw_drv_free_vir_ifaces(struct dvobj_priv *dvobj)
++{
++	int i;
++	//struct dvobj_priv *dvobj = primary_padapter->dvobj;
++
++	for(i=2;i<dvobj->iface_nums;i++)
++	{
++		rtw_drv_free_vir_if(dvobj->padapters[i]);
++	}
++}
++
++void rtw_drv_del_vir_if(_adapter *padapter)
++{
++	rtw_drv_stop_vir_if(padapter);
++	rtw_drv_free_vir_if(padapter);
++}
++
++void rtw_drv_del_vir_ifaces(_adapter *primary_padapter)
++{
++	int i;
++	struct dvobj_priv *dvobj = primary_padapter->dvobj;
++
++	for(i=2;i<dvobj->iface_nums;i++)
++	{
++		rtw_drv_del_vir_if(dvobj->padapters[i]);
++	}
++}
++#endif //CONFIG_MULTI_VIR_IFACES
++
++int _netdev_if2_open(struct net_device *pnetdev)
++{
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(pnetdev);
++	_adapter *primary_padapter = padapter->pbuddy_adapter;
++
++	DBG_871X("+871x_drv - if2_open, bup=%d\n", padapter->bup);
++
++	if(primary_padapter->bup == _FALSE || primary_padapter->hw_init_completed == _FALSE)
++	{
++		_netdev_open(primary_padapter->pnetdev);
++	}
++
++	if(padapter->bup == _FALSE && primary_padapter->bup == _TRUE &&
++		primary_padapter->hw_init_completed == _TRUE)
++	{
++		int i;
++
++		padapter->bDriverStopped = _FALSE;
++	 	padapter->bSurpriseRemoved = _FALSE;
++		padapter->bCardDisableWOHSM = _FALSE;
++
++		_rtw_memcpy(padapter->HalData, primary_padapter->HalData, padapter->hal_data_sz);
++
++		padapter->bFWReady = primary_padapter->bFWReady;
++
++		rtw_hal_set_hwreg(padapter, HW_VAR_DM_INIT_PWDB, NULL);
++
++		//if (init_mlme_ext_priv(padapter) == _FAIL)
++		//	goto netdev_if2_open_error;
++
++
++		if(rtw_start_drv_threads(padapter) == _FAIL)
++		{
++			goto netdev_if2_open_error;
++		}
++
++
++		if(padapter->intf_start)
++		{
++			padapter->intf_start(padapter);
++		}
++
++
++		padapter->hw_init_completed = _TRUE;
++
++		padapter->dir_dev = NULL;
++		rtw_proc_init_one(pnetdev);
++
++
++#ifdef CONFIG_IOCTL_CFG80211
++		rtw_cfg80211_init_wiphy(padapter);
++#endif
++
++		padapter->bup = _TRUE;
++
++	}
++
++	padapter->net_closed = _FALSE;
++
++	_set_timer(&padapter->mlmepriv.dynamic_chk_timer, 2000);
++
++	if(!rtw_netif_queue_stopped(pnetdev))
++		rtw_netif_start_queue(pnetdev);
++	else
++		rtw_netif_wake_queue(pnetdev);
++
++	DBG_871X("-871x_drv - if2_open, bup=%d\n", padapter->bup);
++	return 0;
++
++netdev_if2_open_error:
++
++	padapter->bup = _FALSE;
++
++	netif_carrier_off(pnetdev);
++	rtw_netif_stop_queue(pnetdev);
++
++	return (-1);
++
++}
++
++int netdev_if2_open(struct net_device *pnetdev)
++{
++	int ret;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(pnetdev);
++
++	_enter_critical_mutex(&(adapter_to_dvobj(padapter)->hw_init_mutex), NULL);
++	ret = _netdev_if2_open(pnetdev);
++	_exit_critical_mutex(&(adapter_to_dvobj(padapter)->hw_init_mutex), NULL);
++	return ret;
++}
++
++static int netdev_if2_close(struct net_device *pnetdev)
++{
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(pnetdev);
++
++	padapter->net_closed = _TRUE;
++
++	if(pnetdev)
++	{
++		if (!rtw_netif_queue_stopped(pnetdev))
++			rtw_netif_stop_queue(pnetdev);
++	}
++
++#ifdef CONFIG_IOCTL_CFG80211
++	rtw_scan_abort(padapter);
++	wdev_to_priv(padapter->rtw_wdev)->bandroid_scan = _FALSE;
++#endif
++
++	return 0;
++}
++
++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,29))
++static const struct net_device_ops rtw_netdev_if2_ops = {
++	.ndo_open = netdev_if2_open,
++        .ndo_stop = netdev_if2_close,
++        .ndo_start_xmit = rtw_xmit_entry,
++        .ndo_set_mac_address = rtw_net_set_mac_address,
++        .ndo_get_stats = rtw_net_get_stats,
++        .ndo_do_ioctl = rtw_ioctl,
++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35))
++	.ndo_select_queue	= rtw_select_queue,
++#endif
++};
++#endif
++
++_adapter *rtw_drv_if2_init(_adapter *primary_padapter, void (*set_intf_ops)(struct _io_ops *pops))
++{
++	int res = _FAIL;
++	struct net_device *pnetdev =  NULL;
++	_adapter *padapter = NULL;
++	struct dvobj_priv *pdvobjpriv;
++	u8 mac[ETH_ALEN];
++
++	/****** init netdev ******/
++	pnetdev = rtw_init_netdev(NULL);
++	if (!pnetdev)
++		goto error_rtw_drv_if2_init;
++
++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,29))
++	DBG_871X("register rtw_netdev_if2_ops to netdev_ops\n");
++	pnetdev->netdev_ops = &rtw_netdev_if2_ops;
++#else
++	pnetdev->open = netdev_if2_open;
++	pnetdev->stop = netdev_if2_close;
++#endif
++
++#ifdef CONFIG_NO_WIRELESS_HANDLERS
++	pnetdev->wireless_handlers = NULL;
++#endif
++
++	/****** init adapter ******/
++	padapter = rtw_netdev_priv(pnetdev);
++	_rtw_memcpy(padapter, primary_padapter, sizeof(_adapter));
++
++	//
++	padapter->bup = _FALSE;
++	padapter->net_closed = _TRUE;
++	padapter->hw_init_completed = _FALSE;
++
++	//set adapter_type/iface type
++	padapter->isprimary = _FALSE;
++	padapter->adapter_type = SECONDARY_ADAPTER;
++	padapter->pbuddy_adapter = primary_padapter;
++        padapter->iface_id = IFACE_ID1;
++#ifndef CONFIG_HWPORT_SWAP			//Port0 -> Pri , Port1 -> Sec
++	padapter->iface_type = IFACE_PORT1;
++#else
++	padapter->iface_type = IFACE_PORT0;
++#endif  //CONFIG_HWPORT_SWAP
++	//
++	padapter->pnetdev = pnetdev;
++
++	/****** setup dvobj ******/
++	pdvobjpriv = adapter_to_dvobj(padapter);
++	pdvobjpriv->if2 = padapter;
++	pdvobjpriv->padapters[pdvobjpriv->iface_nums++] = padapter;
++
++	SET_NETDEV_DEV(pnetdev, dvobj_to_dev(pdvobjpriv));
++	#ifdef CONFIG_IOCTL_CFG80211
++	rtw_wdev_alloc(padapter, dvobj_to_dev(pdvobjpriv));
++	#endif //CONFIG_IOCTL_CFG80211
++
++	//set interface_type/chip_type/HardwareType
++	padapter->interface_type = primary_padapter->interface_type;
++	padapter->chip_type = primary_padapter->chip_type;
++	padapter->HardwareType = primary_padapter->HardwareType;
++
++	//set hal data & hal ops
++#if defined(CONFIG_RTL8192C)
++	#if defined(CONFIG_PCI_HCI)
++		rtl8192ce_set_hal_ops(padapter);
++	#elif defined(CONFIG_USB_HCI)
++		rtl8192cu_set_hal_ops(padapter);
++	#endif
++#elif defined(CONFIG_RTL8192D)
++	#if defined(CONFIG_PCI_HCI)
++		rtl8192de_set_hal_ops(padapter);
++	#elif defined(CONFIG_USB_HCI)
++		rtl8192du_set_hal_ops(padapter);
++	#endif
++#endif
++
++	padapter->HalFunc.inirp_init = NULL;
++	padapter->HalFunc.inirp_deinit = NULL;
++
++	//
++	padapter->intf_start = primary_padapter->intf_start;
++	padapter->intf_stop = primary_padapter->intf_stop;
++
++	//step init_io_priv
++	if ((rtw_init_io_priv(padapter, set_intf_ops)) == _FAIL) {
++		RT_TRACE(_module_hci_intfs_c_,_drv_err_,(" \n Can't init io_reqs\n"));
++	}
++
++	//step read_chip_version
++	rtw_hal_read_chip_version(padapter);
++
++	//step usb endpoint mapping
++	rtw_hal_chip_configure(padapter);
++
++
++	//init drv data
++	if(rtw_init_drv_sw(padapter)!= _SUCCESS)
++		goto error_rtw_drv_if2_init;
++
++	//get mac address from primary_padapter
++	_rtw_memcpy(mac, primary_padapter->eeprompriv.mac_addr, ETH_ALEN);
++
++	if (((mac[0]==0xff) &&(mac[1]==0xff) && (mac[2]==0xff) &&
++	     (mac[3]==0xff) && (mac[4]==0xff) &&(mac[5]==0xff)) ||
++	    ((mac[0]==0x0) && (mac[1]==0x0) && (mac[2]==0x0) &&
++	     (mac[3]==0x0) && (mac[4]==0x0) &&(mac[5]==0x0)))
++	{
++		mac[0] = 0x00;
++		mac[1] = 0xe0;
++		mac[2] = 0x4c;
++		mac[3] = 0x87;
++		mac[4] = 0x11;
++		mac[5] = 0x22;
++	}
++	else
++	{
++		//If the BIT1 is 0, the address is universally administered.
++		//If it is 1, the address is locally administered
++		mac[0] |= BIT(1); // locally administered
++
++	}
++
++	_rtw_memcpy(padapter->eeprompriv.mac_addr, mac, ETH_ALEN);
++	rtw_init_wifidirect_addrs(padapter, padapter->eeprompriv.mac_addr, padapter->eeprompriv.mac_addr);
++
++	primary_padapter->pbuddy_adapter = padapter;
++
++	padapter->dir_dev = NULL;
++
++	res = _SUCCESS;
++
++	return padapter;
++
++
++error_rtw_drv_if2_init:
++
++	if(padapter)
++		rtw_free_drv_sw(padapter);
++
++	if (pnetdev)
++		rtw_free_netdev(pnetdev);
++
++	return NULL;
++
++}
++
++void rtw_drv_if2_free(_adapter *if2)
++{
++	_adapter *padapter = if2;
++	struct net_device *pnetdev = NULL;
++
++	if (padapter == NULL)
++		return;
++
++	pnetdev = padapter->pnetdev;
++
++#ifdef CONFIG_IOCTL_CFG80211
++	rtw_wdev_free(padapter->rtw_wdev);
++#endif /* CONFIG_IOCTL_CFG80211 */
++
++
++	rtw_free_drv_sw(padapter);
++
++	rtw_free_netdev(pnetdev);
++
++}
++
++void rtw_drv_if2_stop(_adapter *if2)
++{
++	_adapter *padapter = if2;
++
++	if (padapter == NULL)
++		return;
++
++	rtw_cancel_all_timer(padapter);
++
++	if (padapter->bup == _TRUE) {
++		padapter->bDriverStopped = _TRUE;
++		#ifdef CONFIG_XMIT_ACK
++		if (padapter->xmitpriv.ack_tx)
++			rtw_ack_tx_done(&padapter->xmitpriv, RTW_SCTX_DONE_DRV_STOP);
++		#endif
++
++		if(padapter->intf_stop)
++		{
++			padapter->intf_stop(padapter);
++		}
++
++		rtw_stop_drv_threads(padapter);
++
++		padapter->bup = _FALSE;
++	}
++}
++#endif //end of CONFIG_CONCURRENT_MODE
++
++#ifdef CONFIG_BR_EXT
++void netdev_br_init(struct net_device *netdev)
++{
++	_adapter *adapter = (_adapter *)rtw_netdev_priv(netdev);
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 35))
++	rcu_read_lock();
++#endif	// (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 35))
++
++	//if(check_fwstate(pmlmepriv, WIFI_STATION_STATE|WIFI_ADHOC_STATE) == _TRUE)
++	{
++		//struct net_bridge	*br = netdev->br_port->br;//->dev->dev_addr;
++#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35))
++		if (netdev->br_port)
++#else   // (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35))
++		if (rcu_dereference(adapter->pnetdev->rx_handler_data))
++#endif  // (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35))
++		{
++			struct net_device *br_netdev;
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
++			br_netdev = dev_get_by_name(CONFIG_BR_EXT_BRNAME);
++#else	// (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
++			struct net *devnet = NULL;
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26))
++			devnet = netdev->nd_net;
++#else	// (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26))
++			devnet = dev_net(netdev);
++#endif	// (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26))
++
++			br_netdev = dev_get_by_name(devnet, CONFIG_BR_EXT_BRNAME);
++#endif	// (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
++
++			if (br_netdev) {
++				memcpy(adapter->br_mac, br_netdev->dev_addr, ETH_ALEN);
++				dev_put(br_netdev);
++			} else
++				printk("%s()-%d: dev_get_by_name(%s) failed!", __FUNCTION__, __LINE__, CONFIG_BR_EXT_BRNAME);
++		}
++
++		adapter->ethBrExtInfo.addPPPoETag = 1;
++	}
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 35))
++	rcu_read_unlock();
++#endif	// (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 35))
++}
++#endif //CONFIG_BR_EXT
++
++static int _rtw_drv_register_netdev(_adapter *padapter, char *name)
++{
++	int ret = _SUCCESS;
++	struct net_device *pnetdev = padapter->pnetdev;
++
++	/* alloc netdev name */
++	rtw_init_netdev_name(pnetdev, name);
++
++	_rtw_memcpy(pnetdev->dev_addr, padapter->eeprompriv.mac_addr, ETH_ALEN);
++
++	/* Tell the network stack we exist */
++	if (register_netdev(pnetdev) != 0) {
++		DBG_871X(FUNC_NDEV_FMT "Failed!\n", FUNC_NDEV_ARG(pnetdev));
++		ret = _FAIL;
++		goto error_register_netdev;
++	}
++
++	DBG_871X("%s, MAC Address (if%d) = " MAC_FMT "\n", __FUNCTION__, (padapter->iface_id+1), MAC_ARG(pnetdev->dev_addr));
++
++	return ret;
++
++error_register_netdev:
++
++	if(padapter->iface_id > IFACE_ID0)
++	{
++		rtw_free_drv_sw(padapter);
++
++		rtw_free_netdev(pnetdev);
++	}
++
++	return ret;
++}
++
++int rtw_drv_register_netdev(_adapter *if1)
++{
++	int i, status = _SUCCESS;
++	struct dvobj_priv *dvobj = if1->dvobj;
++
++	if(dvobj->iface_nums < IFACE_ID_MAX)
++	{
++		for(i=0; i<dvobj->iface_nums; i++)
++		{
++			_adapter *padapter = dvobj->padapters[i];
++
++			if(padapter)
++			{
++				char *name;
++
++				if(padapter->iface_id == IFACE_ID0)
++					name = if1->registrypriv.ifname;
++				else if(padapter->iface_id == IFACE_ID1)
++					name = if1->registrypriv.if2name;
++				else
++					name = "wlan%d";
++
++				if((status = _rtw_drv_register_netdev(padapter, name)) != _SUCCESS) {
++					break;
++				}
++			}
++		}
++	}
++
++	return status;
++}
++
++int _netdev_open(struct net_device *pnetdev)
++{
++	uint status;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(pnetdev);
++	struct pwrctrl_priv *pwrctrlpriv = &padapter->pwrctrlpriv;
++
++	RT_TRACE(_module_os_intfs_c_,_drv_info_,("+871x_drv - dev_open\n"));
++	DBG_871X("+871x_drv - drv_open, bup=%d\n", padapter->bup);
++
++	if(pwrctrlpriv->ps_flag == _TRUE){
++		padapter->net_closed = _FALSE;
++		goto netdev_open_normal_process;
++	}
++
++	if(padapter->bup == _FALSE)
++	{
++		padapter->bDriverStopped = _FALSE;
++		padapter->bSurpriseRemoved = _FALSE;
++		padapter->bCardDisableWOHSM = _FALSE;
++
++		status = rtw_hal_init(padapter);
++		if (status ==_FAIL)
++		{
++			RT_TRACE(_module_os_intfs_c_,_drv_err_,("rtl871x_hal_init(): Can't init h/w!\n"));
++			goto netdev_open_error;
++		}
++
++		DBG_871X("MAC Address = "MAC_FMT"\n", MAC_ARG(pnetdev->dev_addr));
++
++
++		status=rtw_start_drv_threads(padapter);
++		if(status ==_FAIL)
++		{
++			RT_TRACE(_module_os_intfs_c_,_drv_err_,("Initialize driver software resource Failed!\n"));
++			goto netdev_open_error;
++		}
++
++#ifdef CONFIG_DRVEXT_MODULE
++		init_drvext(padapter);
++#endif
++
++		if(padapter->intf_start)
++		{
++			padapter->intf_start(padapter);
++		}
++
++#ifndef RTK_DMP_PLATFORM
++		rtw_proc_init_one(pnetdev);
++#endif
++
++#ifdef CONFIG_IOCTL_CFG80211
++		rtw_cfg80211_init_wiphy(padapter);
++#endif
++
++		rtw_led_control(padapter, LED_CTL_NO_LINK);
++
++		padapter->bup = _TRUE;
++	}
++	padapter->net_closed = _FALSE;
++
++	_set_timer(&padapter->mlmepriv.dynamic_chk_timer, 2000);
++
++	padapter->pwrctrlpriv.bips_processing = _FALSE;
++	rtw_set_pwr_state_check_timer(&padapter->pwrctrlpriv);
++
++	//netif_carrier_on(pnetdev);//call this func when rtw_joinbss_event_callback return success
++	if(!rtw_netif_queue_stopped(pnetdev))
++		rtw_netif_start_queue(pnetdev);
++	else
++		rtw_netif_wake_queue(pnetdev);
++
++#ifdef CONFIG_BR_EXT
++	netdev_br_init(pnetdev);
++#endif	// CONFIG_BR_EXT
++
++netdev_open_normal_process:
++
++	#ifdef CONFIG_CONCURRENT_MODE
++	{
++		_adapter *sec_adapter = padapter->pbuddy_adapter;
++		if(sec_adapter && (sec_adapter->bup == _FALSE || sec_adapter->hw_init_completed == _FALSE))
++			_netdev_if2_open(sec_adapter->pnetdev);
++	}
++	#endif
++
++	RT_TRACE(_module_os_intfs_c_,_drv_info_,("-871x_drv - dev_open\n"));
++	DBG_871X("-871x_drv - drv_open, bup=%d\n", padapter->bup);
++
++	return 0;
++
++netdev_open_error:
++
++	padapter->bup = _FALSE;
++
++	netif_carrier_off(pnetdev);
++	rtw_netif_stop_queue(pnetdev);
++
++	RT_TRACE(_module_os_intfs_c_,_drv_err_,("-871x_drv - dev_open, fail!\n"));
++	DBG_871X("-871x_drv - drv_open fail, bup=%d\n", padapter->bup);
++
++	return (-1);
++
++}
++
++int netdev_open(struct net_device *pnetdev)
++{
++	int ret;
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(pnetdev);
++
++	_enter_critical_mutex(&(adapter_to_dvobj(padapter)->hw_init_mutex), NULL);
++	ret = _netdev_open(pnetdev);
++	_exit_critical_mutex(&(adapter_to_dvobj(padapter)->hw_init_mutex), NULL);
++
++	return ret;
++}
++
++#ifdef CONFIG_IPS
++int  ips_netdrv_open(_adapter *padapter)
++{
++	int status = _SUCCESS;
++	padapter->net_closed = _FALSE;
++	DBG_871X("===> %s.........\n",__FUNCTION__);
++
++
++	padapter->bDriverStopped = _FALSE;
++	padapter->bCardDisableWOHSM = _FALSE;
++	//padapter->bup = _TRUE;
++
++	status = rtw_hal_init(padapter);
++	if (status ==_FAIL)
++	{
++		RT_TRACE(_module_os_intfs_c_,_drv_err_,("ips_netdrv_open(): Can't init h/w!\n"));
++		goto netdev_open_error;
++	}
++
++	if(padapter->intf_start)
++	{
++		padapter->intf_start(padapter);
++	}
++
++	rtw_set_pwr_state_check_timer(&padapter->pwrctrlpriv);
++  	_set_timer(&padapter->mlmepriv.dynamic_chk_timer,5000);
++
++	 return _SUCCESS;
++
++netdev_open_error:
++	//padapter->bup = _FALSE;
++	DBG_871X("-ips_netdrv_open - drv_open failure, bup=%d\n", padapter->bup);
++
++	return _FAIL;
++}
++
++
++int rtw_ips_pwr_up(_adapter *padapter)
++{
++	int result;
++	u32 start_time = rtw_get_current_time();
++	DBG_871X("===>  rtw_ips_pwr_up..............\n");
++	rtw_reset_drv_sw(padapter);
++
++	result = ips_netdrv_open(padapter);
++
++	rtw_led_control(padapter, LED_CTL_NO_LINK);
++
++ 	DBG_871X("<===  rtw_ips_pwr_up.............. in %dms\n", rtw_get_passing_time_ms(start_time));
++	return result;
++
++}
++
++void rtw_ips_pwr_down(_adapter *padapter)
++{
++	u32 start_time = rtw_get_current_time();
++	DBG_871X("===> rtw_ips_pwr_down...................\n");
++
++	padapter->bCardDisableWOHSM = _TRUE;
++	padapter->net_closed = _TRUE;
++
++	rtw_led_control(padapter, LED_CTL_POWER_OFF);
++
++	rtw_ips_dev_unload(padapter);
++	padapter->bCardDisableWOHSM = _FALSE;
++	DBG_871X("<=== rtw_ips_pwr_down..................... in %dms\n", rtw_get_passing_time_ms(start_time));
++}
++#endif
++void rtw_ips_dev_unload(_adapter *padapter)
++{
++	struct net_device *pnetdev= (struct net_device*)padapter->pnetdev;
++	struct xmit_priv	*pxmitpriv = &(padapter->xmitpriv);
++	DBG_871X("====> %s...\n",__FUNCTION__);
++
++	rtw_hal_set_hwreg(padapter, HW_VAR_FIFO_CLEARN_UP, 0);
++
++	if(padapter->intf_stop)
++	{
++		padapter->intf_stop(padapter);
++	}
++
++	//s5.
++	if(padapter->bSurpriseRemoved == _FALSE)
++	{
++		rtw_hal_deinit(padapter);
++	}
++
++}
++
++int pm_netdev_open(struct net_device *pnetdev,u8 bnormal)
++{
++	int status;
++	if(bnormal)
++		status = netdev_open(pnetdev);
++#ifdef CONFIG_IPS
++	else
++		status =  (_SUCCESS == ips_netdrv_open((_adapter *)rtw_netdev_priv(pnetdev)))?(0):(-1);
++#endif
++
++	return status;
++}
++
++static int netdev_close(struct net_device *pnetdev)
++{
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(pnetdev);
++
++	RT_TRACE(_module_os_intfs_c_,_drv_info_,("+871x_drv - drv_close\n"));
++
++	if(padapter->pwrctrlpriv.bInternalAutoSuspend == _TRUE)
++	{
++		//rtw_pwr_wakeup(padapter);
++		if(padapter->pwrctrlpriv.rf_pwrstate == rf_off)
++			padapter->pwrctrlpriv.ps_flag = _TRUE;
++	}
++	padapter->net_closed = _TRUE;
++
++/*	if(!padapter->hw_init_completed)
++	{
++		DBG_871X("(1)871x_drv - drv_close, bup=%d, hw_init_completed=%d\n", padapter->bup, padapter->hw_init_completed);
++
++		padapter->bDriverStopped = _TRUE;
++
++		rtw_dev_unload(padapter);
++	}
++	else*/
++	if(padapter->pwrctrlpriv.rf_pwrstate == rf_on){
++		DBG_871X("(2)871x_drv - drv_close, bup=%d, hw_init_completed=%d\n", padapter->bup, padapter->hw_init_completed);
++
++		//s1.
++		if(pnetdev)
++		{
++			if (!rtw_netif_queue_stopped(pnetdev))
++				rtw_netif_stop_queue(pnetdev);
++		}
++
++#ifndef CONFIG_ANDROID
++		//s2.
++		LeaveAllPowerSaveMode(padapter);
++		rtw_disassoc_cmd(padapter, 500, _FALSE);
++		//s2-2.  indicate disconnect to os
++		rtw_indicate_disconnect(padapter);
++		//s2-3.
++		rtw_free_assoc_resources(padapter, 1);
++		//s2-4.
++		rtw_free_network_queue(padapter,_TRUE);
++#endif
++		// Close LED
++		rtw_led_control(padapter, LED_CTL_POWER_OFF);
++	}
++
++#ifdef CONFIG_BR_EXT
++	//if (OPMODE & (WIFI_STATION_STATE | WIFI_ADHOC_STATE))
++	{
++		//void nat25_db_cleanup(_adapter *priv);
++		nat25_db_cleanup(padapter);
++	}
++#endif	// CONFIG_BR_EXT
++
++#ifdef CONFIG_P2P
++#ifdef CONFIG_IOCTL_CFG80211
++	if( padapter->wdinfo.driver_interface == DRIVER_CFG80211 )
++	{
++		if(wdev_to_priv(padapter->rtw_wdev)->p2p_enabled == _TRUE)
++			wdev_to_priv(padapter->rtw_wdev)->p2p_enabled = _FALSE;
++	}
++#endif //CONFIG_IOCTL_CFG80211
++	rtw_p2p_enable(padapter, P2P_ROLE_DISABLE);
++#endif //CONFIG_P2P
++
++#ifdef CONFIG_IOCTL_CFG80211
++	rtw_scan_abort(padapter);
++	wdev_to_priv(padapter->rtw_wdev)->bandroid_scan = _FALSE;
++	padapter->rtw_wdev->iftype = NL80211_IFTYPE_MONITOR; //set this at the end
++#endif //CONFIG_IOCTL_CFG80211
++
++	RT_TRACE(_module_os_intfs_c_,_drv_info_,("-871x_drv - drv_close\n"));
++	DBG_871X("-871x_drv - drv_close, bup=%d\n", padapter->bup);
++
++	return 0;
++}
++
++void rtw_ndev_destructor(struct net_device *ndev)
++{
++	DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev));
++
++#ifdef CONFIG_IOCTL_CFG80211
++	if (ndev->ieee80211_ptr)
++		rtw_mfree((u8 *)ndev->ieee80211_ptr, sizeof(struct wireless_dev));
++#endif
++	free_netdev(ndev);
++}
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/os_dep/linux/pci_intf.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/os_dep/linux/pci_intf.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/os_dep/linux/pci_intf.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/os_dep/linux/pci_intf.c	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,1997 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _HCI_INTF_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <recv_osdep.h>
++#include <xmit_osdep.h>
++#include <hal_intf.h>
++#include <rtw_version.h>
++
++#ifndef CONFIG_PCI_HCI
++
++#error "CONFIG_PCI_HCI shall be on!\n"
++
++#endif
++
++#include <pci_ops.h>
++#include <pci_osintf.h>
++#include <pci_hal.h>
++
++#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS)
++
++#error "Shall be Linux or Windows, but not both!\n"
++
++#endif
++
++#ifdef CONFIG_80211N_HT
++extern int rtw_ht_enable;
++extern int rtw_cbw40_enable;
++extern int rtw_ampdu_enable;//for enable tx_ampdu
++#endif
++
++#ifdef CONFIG_PM
++extern int pm_netdev_open(struct net_device *pnetdev);
++static int rtw_suspend(struct pci_dev *pdev, pm_message_t state);
++static int rtw_resume(struct pci_dev *pdev);
++#endif
++
++
++static int rtw_drv_init(struct pci_dev *pdev, const struct pci_device_id *pdid);
++static void rtw_dev_remove(struct pci_dev *pdev);
++
++static struct specific_device_id specific_device_id_tbl[] = {
++	{.idVendor=0x0b05, .idProduct=0x1791, .flags=SPEC_DEV_ID_DISABLE_HT},
++	{.idVendor=0x13D3, .idProduct=0x3311, .flags=SPEC_DEV_ID_DISABLE_HT},
++	{}
++};
++
++struct pci_device_id rtw_pci_id_tbl[] = {
++#ifdef CONFIG_RTL8192C
++	{PCI_DEVICE(PCI_VENDER_ID_REALTEK, 0x8191)},
++	{PCI_DEVICE(PCI_VENDER_ID_REALTEK, 0x8178)},
++	{PCI_DEVICE(PCI_VENDER_ID_REALTEK, 0x8177)},
++	{PCI_DEVICE(PCI_VENDER_ID_REALTEK, 0x8176)},
++#endif
++#ifdef CONFIG_RTL8192D
++	{PCI_DEVICE(PCI_VENDER_ID_REALTEK, 0x8193)},
++	{PCI_DEVICE(PCI_VENDER_ID_REALTEK, 0x002B)},
++#endif
++	{},
++};
++
++struct pci_drv_priv {
++	struct pci_driver rtw_pci_drv;
++	int drv_registered;
++};
++
++
++static struct pci_drv_priv pci_drvpriv = {
++	.rtw_pci_drv.name = (char*)DRV_NAME,
++	.rtw_pci_drv.probe = rtw_drv_init,
++	.rtw_pci_drv.remove = rtw_dev_remove,
++	.rtw_pci_drv.id_table = rtw_pci_id_tbl,
++#ifdef CONFIG_PM
++	.rtw_pci_drv.suspend = rtw_suspend,
++	.rtw_pci_drv.resume = rtw_resume,
++#else
++	.rtw_pci_drv.suspend = NULL,
++	.rtw_pci_drv.resume = NULL,
++#endif
++};
++
++
++MODULE_DEVICE_TABLE(pci, rtw_pci_id_tbl);
++
++
++static u16 pcibridge_vendors[PCI_BRIDGE_VENDOR_MAX] = {
++	INTEL_VENDOR_ID,
++	ATI_VENDOR_ID,
++	AMD_VENDOR_ID,
++	SIS_VENDOR_ID
++};
++
++static u8 rtw_pci_platform_switch_device_pci_aspm(_adapter *padapter, u8 value)
++{
++	struct dvobj_priv	*pdvobjpriv = adapter_to_dvobj(padapter);
++	u8	bresult = _SUCCESS;
++	int	error;
++
++	value |= 0x40;
++
++	error = pci_write_config_byte(pdvobjpriv->ppcidev, 0x80, value);
++
++	if(error != 0)
++	{
++		bresult = _FALSE;
++		DBG_871X("rtw_pci_platform_switch_device_pci_aspm error (%d)\n",error);
++	}
++
++	return bresult;
++}
++
++//
++// When we set 0x01 to enable clk request. Set 0x0 to disable clk req.
++//
++static u8 rtw_pci_switch_clk_req(_adapter *padapter, u8 value)
++{
++	struct dvobj_priv	*pdvobjpriv = adapter_to_dvobj(padapter);
++	u8	buffer, bresult = _SUCCESS;
++	int	error;
++
++	buffer = value;
++
++	if(!padapter->hw_init_completed)
++		return bresult;
++
++	error = pci_write_config_byte(pdvobjpriv->ppcidev, 0x81, value);
++
++	if(error != 0)
++	{
++		bresult = _FALSE;
++		DBG_871X("rtw_pci_switch_clk_req error (%d)\n",error);
++	}
++
++	return bresult;
++}
++
++#if 0
++//Description:
++//Disable RTL8192SE ASPM & Disable Pci Bridge ASPM
++void rtw_pci_disable_aspm(_adapter *padapter)
++{
++	struct dvobj_priv	*pdvobjpriv = adapter_to_dvobj(padapter);
++	struct pwrctrl_priv	*pwrpriv = &padapter->pwrctrlpriv;
++	struct pci_priv	*pcipriv = &(pdvobjpriv->pcipriv);
++	u32	pcicfg_addrport = 0;
++	u8	num4bytes;
++	u8	linkctrl_reg;
++	u16	pcibridge_linkctrlreg, aspmlevel = 0;
++
++	// When there exists anyone's busnum, devnum, and funcnum that are set to 0xff,
++	// we do not execute any action and return.
++	// if it is not intel bus then don't enable ASPM.
++	if ((pcipriv->busnumber == 0xff
++		&& pcipriv->devnumber == 0xff
++		&& pcipriv->funcnumber == 0xff)
++		|| (pcipriv->pcibridge_busnum == 0xff
++		&& pcipriv->pcibridge_devnum == 0xff
++		&& pcipriv->pcibridge_funcnum == 0xff))
++	{
++		DBG_871X("PlatformEnableASPM(): Fail to enable ASPM. Cannot find the Bus of PCI(Bridge).\n");
++		return;
++	}
++
++	if (pcipriv->pcibridge_vendor == PCI_BRIDGE_VENDOR_UNKNOWN) {
++		DBG_871X("%s(): Disable ASPM. Recognize the Bus of PCI(Bridge) as UNKNOWN.\n", __func__);
++	}
++
++	if (pwrpriv->reg_rfps_level & RT_RF_OFF_LEVL_CLK_REQ) {
++		RT_CLEAR_PS_LEVEL(pwrpriv, RT_RF_OFF_LEVL_CLK_REQ);
++		rtw_pci_switch_clk_req(padapter, 0x0);
++	}
++
++	{
++		// Suggested by SD1 for promising device will in L0 state after an I/O.
++		u8 tmp_u1b;
++
++		pci_read_config_byte(pdvobjpriv->ppcidev, 0x80, &tmp_u1b);
++	}
++
++	// Retrieve original configuration settings.
++	linkctrl_reg = pcipriv->linkctrl_reg;
++	pcibridge_linkctrlreg = pcipriv->pcibridge_linkctrlreg;
++
++	// Set corresponding value.
++	aspmlevel |= BIT(0) | BIT(1);
++	linkctrl_reg &= ~aspmlevel;
++	pcibridge_linkctrlreg &= ~(BIT(0) | BIT(1));
++
++	rtw_pci_platform_switch_device_pci_aspm(padapter, linkctrl_reg);
++	rtw_udelay_os(50);
++
++	//When there exists anyone's busnum, devnum, and funcnum that are set to 0xff,
++	// we do not execute any action and return.
++	if ((pcipriv->busnumber == 0xff &&
++		pcipriv->devnumber == 0xff &&
++		pcipriv->funcnumber == 0xff) ||
++		(pcipriv->pcibridge_busnum == 0xff &&
++		pcipriv->pcibridge_devnum == 0xff
++		&& pcipriv->pcibridge_funcnum == 0xff))
++	{
++		//Do Nothing!!
++	}
++	else
++	{
++		//4 //Disable Pci Bridge ASPM
++		pcicfg_addrport = (pcipriv->pcibridge_busnum << 16) |
++						(pcipriv->pcibridge_devnum << 11) |
++						(pcipriv->pcibridge_funcnum << 8) | (1 << 31);
++		num4bytes = (pcipriv->pcibridge_pciehdr_offset + 0x10) / 4;
++
++		// set up address port at 0xCF8 offset field= 0 (dev|vend)
++		NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + (num4bytes << 2));
++
++		// now grab data port with device|vendor 4 byte dword
++		NdisRawWritePortUchar(PCI_CONF_DATA, pcibridge_linkctrlreg);
++
++		DBG_871X("rtw_pci_disable_aspm():PciBridge busnumber[%x], DevNumbe[%x], funcnumber[%x], Write reg[%x] = %x\n",
++			pcipriv->pcibridge_busnum, pcipriv->pcibridge_devnum,
++			pcipriv->pcibridge_funcnum,
++			(pcipriv->pcibridge_pciehdr_offset+0x10), pcibridge_linkctrlreg);
++
++		rtw_udelay_os(50);
++	}
++}
++
++//[ASPM]
++//Description:
++//              Enable RTL8192SE ASPM & Enable Pci Bridge ASPM for power saving
++//              We should follow the sequence to enable RTL8192SE first then enable Pci Bridge ASPM
++//              or the system will show bluescreen.
++void rtw_pci_enable_aspm(_adapter *padapter)
++{
++	struct dvobj_priv	*pdvobjpriv = adapter_to_dvobj(padapter);
++	struct pwrctrl_priv	*pwrpriv = &padapter->pwrctrlpriv;
++	struct pci_priv	*pcipriv = &(pdvobjpriv->pcipriv);
++	u16	aspmlevel = 0;
++	u32	pcicfg_addrport = 0;
++	u8	num4bytes;
++	u8	u_pcibridge_aspmsetting = 0;
++	u8	u_device_aspmsetting = 0;
++
++	// When there exists anyone's busnum, devnum, and funcnum that are set to 0xff,
++	// we do not execute any action and return.
++	// if it is not intel bus then don't enable ASPM.
++
++	if ((pcipriv->busnumber == 0xff
++		&& pcipriv->devnumber == 0xff
++		&& pcipriv->funcnumber == 0xff)
++		|| (pcipriv->pcibridge_busnum == 0xff
++		&& pcipriv->pcibridge_devnum == 0xff
++		&& pcipriv->pcibridge_funcnum == 0xff))
++	{
++		DBG_871X("PlatformEnableASPM(): Fail to enable ASPM. Cannot find the Bus of PCI(Bridge).\n");
++		return;
++	}
++
++	//4 Enable Pci Bridge ASPM
++	pcicfg_addrport = (pcipriv->pcibridge_busnum << 16)
++					| (pcipriv->pcibridge_devnum << 11)
++					| (pcipriv->pcibridge_funcnum << 8) | (1 << 31);
++	num4bytes = (pcipriv->pcibridge_pciehdr_offset + 0x10) / 4;
++	// set up address port at 0xCF8 offset field= 0 (dev|vend)
++	NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + (num4bytes << 2));
++	// now grab data port with device|vendor 4 byte dword
++
++	u_pcibridge_aspmsetting = pcipriv->pcibridge_linkctrlreg | pdvobjpriv->const_hostpci_aspm_setting;
++
++	if (pcipriv->pcibridge_vendor == PCI_BRIDGE_VENDOR_INTEL ||
++		pcipriv->pcibridge_vendor == PCI_BRIDGE_VENDOR_SIS)
++		u_pcibridge_aspmsetting &= ~BIT(0);
++
++	NdisRawWritePortUchar(PCI_CONF_DATA, u_pcibridge_aspmsetting);
++
++	DBG_871X("PlatformEnableASPM():PciBridge busnumber[%x], DevNumbe[%x], funcnumber[%x], Write reg[%x] = %x\n",
++		pcipriv->pcibridge_busnum,
++		pcipriv->pcibridge_devnum,
++		pcipriv->pcibridge_funcnum,
++		(pcipriv->pcibridge_pciehdr_offset+0x10),
++		u_pcibridge_aspmsetting);
++
++	rtw_udelay_os(50);
++
++	// Get ASPM level (with/without Clock Req)
++	aspmlevel |= pdvobjpriv->const_devicepci_aspm_setting;
++	u_device_aspmsetting = pcipriv->linkctrl_reg;
++	u_device_aspmsetting |= aspmlevel;
++
++	rtw_pci_platform_switch_device_pci_aspm(padapter, u_device_aspmsetting);	//(priv->linkctrl_reg | ASPMLevel));
++
++	if (pwrpriv->reg_rfps_level & RT_RF_OFF_LEVL_CLK_REQ) {
++		rtw_pci_switch_clk_req(padapter, (pwrpriv->reg_rfps_level & RT_RF_OFF_LEVL_CLK_REQ) ? 1 : 0);
++		RT_SET_PS_LEVEL(pwrpriv, RT_RF_OFF_LEVL_CLK_REQ);
++	}
++
++	rtw_udelay_os(50);
++}
++
++//
++//Description:
++//To get link control field by searching from PCIe capability lists.
++//
++static u8
++rtw_get_link_control_field(_adapter *padapter, u8 busnum, u8 devnum,
++				u8 funcnum)
++{
++	struct dvobj_priv	*pdvobjpriv = adapter_to_dvobj(padapter);
++	struct pci_priv	*pcipriv = &(pdvobjpriv->pcipriv);
++	struct rt_pci_capabilities_header capability_hdr;
++	u8	capability_offset, num4bytes;
++	u32	pcicfg_addrport = 0;
++	u8	linkctrl_reg;
++	u8	status = _FALSE;
++
++	//If busnum, devnum, funcnum are set to 0xff.
++	if (busnum == 0xff && devnum == 0xff && funcnum == 0xff) {
++		DBG_871X("GetLinkControlField(): Fail to find PCIe Capability\n");
++		return _FALSE;
++	}
++
++	pcicfg_addrport = (busnum << 16) | (devnum << 11) | (funcnum << 8) | (1 << 31);
++
++	//2PCIeCap
++
++	// The device supports capability lists. Find the capabilities.
++	num4bytes = 0x34 / 4;
++	//get capability_offset
++	// set up address port at 0xCF8 offset field= 0 (dev|vend)
++	NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + (num4bytes << 2));
++	// now grab data port with device|vendor 4 byte dword
++	NdisRawReadPortUchar(PCI_CONF_DATA, &capability_offset);
++
++	// Loop through the capabilities in search of the power management capability.
++	// The list is NULL-terminated, so the last offset will always be zero.
++
++	while (capability_offset != 0) {
++		// First find the number of 4 Byte.
++		num4bytes = capability_offset / 4;
++
++		// Read the header of the capability at  this offset. If the retrieved capability is not
++		// the power management capability that we are looking for, follow the link to the
++		// next capability and continue looping.
++
++		//4 get capability_hdr
++		// set up address port at 0xCF8 offset field= 0 (dev|vend)
++		NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + (num4bytes << 2));
++		// now grab data port with device|vendor 4 byte dword
++		NdisRawReadPortUshort(PCI_CONF_DATA, (u16 *) & capability_hdr);
++
++		// Found the PCI express capability
++		if (capability_hdr.capability_id == PCI_CAPABILITY_ID_PCI_EXPRESS)
++		{
++			break;
++		}
++		else
++		{
++			// This is some other capability. Keep looking for the PCI express capability.
++			capability_offset = capability_hdr.next;
++		}
++	}
++
++	if (capability_hdr.capability_id == PCI_CAPABILITY_ID_PCI_EXPRESS)	//
++	{
++		num4bytes = (capability_offset + 0x10) / 4;
++
++		//4 Read  Link Control Register
++		// set up address port at 0xCF8 offset field= 0 (dev|vend)
++		NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + (num4bytes << 2));
++		// now grab data port with device|vendor 4 byte dword
++		NdisRawReadPortUchar(PCI_CONF_DATA, &linkctrl_reg);
++
++		pcipriv->pcibridge_pciehdr_offset = capability_offset;
++		pcipriv->pcibridge_linkctrlreg = linkctrl_reg;
++
++		status = _TRUE;
++	}
++	else
++	{
++		// We didn't find a PCIe capability.
++		DBG_871X("GetLinkControlField(): Cannot Find PCIe Capability\n");
++	}
++
++	return status;
++}
++
++//
++//Description:
++//To get PCI bus infomation and return busnum, devnum, and funcnum about
++//the bus(bridge) which the device binds.
++//
++static u8
++rtw_get_pci_bus_info(_adapter *padapter,
++			  u16 vendorid,
++			  u16 deviceid,
++			  u8 irql, u8 basecode, u8 subclass, u8 filed19val,
++			  u8 * busnum, u8 * devnum, u8 * funcnum)
++{
++	struct dvobj_priv	*pdvobjpriv = adapter_to_dvobj(padapter);
++	struct pci_dev	*pdev = pdvobjpriv->ppcidev;
++	u8	busnum_idx, devicenum_idx, functionnum_idx;
++	u32	pcicfg_addrport = 0;
++	u32	dev_venid = 0, classcode, field19, headertype;
++	u16	venId, devId;
++	u8	basec, subc, irqline;
++	u16	regoffset;
++	u8	b_singlefunc = _FALSE;
++	u8	b_bridgechk = _FALSE;
++
++	*busnum = 0xFF;
++	*devnum = 0xFF;
++	*funcnum = 0xFF;
++
++	//DBG_871X("==============>vendorid:%x,deviceid:%x,irql:%x\n", vendorid,deviceid,irql);
++	if ((basecode == PCI_CLASS_BRIDGE_DEV) &&
++		(subclass == PCI_SUBCLASS_BR_PCI_TO_PCI)
++		&& (filed19val == U1DONTCARE))
++		b_bridgechk = _TRUE;
++
++	// perform a complete pci bus scan operation
++	for (busnum_idx = 0; busnum_idx < PCI_MAX_BRIDGE_NUMBER; busnum_idx++)	//255
++	{
++		for (devicenum_idx = 0; devicenum_idx < PCI_MAX_DEVICES; devicenum_idx++)	//32
++		{
++			b_singlefunc = _FALSE;
++			for (functionnum_idx = 0; functionnum_idx < PCI_MAX_FUNCTION; functionnum_idx++)	//8
++			{
++				//
++				// <Roger_Notes> We have to skip redundant Bus scan to prevent unexpected system hang
++				// if single function is present in this device.
++				// 2009.02.26.
++				//
++				if (functionnum_idx == 0) {
++					//4 get header type (DWORD #3)
++					pcicfg_addrport = (busnum_idx << 16) | (devicenum_idx << 11) | (functionnum_idx << 8) | (1 << 31);
++					NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + (3 << 2));
++					NdisRawReadPortUlong(PCI_CONF_DATA, &headertype);
++					headertype = ((headertype >> 16) & 0x0080) >> 7;	// address 0x0e[7].
++					if (headertype == 0)	//Single function
++						b_singlefunc = _TRUE;
++				}
++				else
++				{//By pass the following scan process.
++					if (b_singlefunc == _TRUE)
++						break;
++				}
++
++				// Set access enable control.
++				pcicfg_addrport = (busnum_idx << 16) | (devicenum_idx << 11) | (functionnum_idx << 8) | (1 << 31);
++
++				//4 // Get vendorid/ deviceid
++				// set up address port at 0xCF8 offset field= 0 (dev|vend)
++				NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport);
++				// now grab data port with device|vendor 4 byte dword
++				NdisRawReadPortUlong(PCI_CONF_DATA, &dev_venid);
++
++				// if data port is full of 1s, no device is present
++				// some broken boards return 0 if a slot is empty:
++				if (dev_venid == 0xFFFFFFFF || dev_venid == 0)
++					continue;	//PCI_INVALID_VENDORID
++
++				// 4 // Get irql
++				regoffset = 0x3C;
++				pcicfg_addrport = (busnum_idx << 16) | (devicenum_idx << 11) | (functionnum_idx << 8) | (1 << 31) | (regoffset & 0xFFFFFFFC);
++				NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport);
++				NdisRawReadPortUchar((PCI_CONF_DATA +(regoffset & 0x3)), &irqline);
++
++				venId = (u16) (dev_venid >> 0) & 0xFFFF;
++				devId = (u16) (dev_venid >> 16) & 0xFFFF;
++
++				// Check Vendor ID
++				if (!b_bridgechk && (venId != vendorid) && (vendorid != U2DONTCARE))
++					continue;
++
++				// Check Device ID
++				if (!b_bridgechk && (devId != deviceid) && (deviceid != U2DONTCARE))
++					continue;
++
++				// Check irql
++				if (!b_bridgechk && (irqline != irql) && (irql != U1DONTCARE))
++					continue;
++
++				//4 get Class Code
++				pcicfg_addrport = (busnum_idx << 16) | (devicenum_idx << 11) | (functionnum_idx << 8) | (1 << 31);
++				NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + (2 << 2));
++				NdisRawReadPortUlong(PCI_CONF_DATA, &classcode);
++				classcode = classcode >> 8;
++
++				basec = (u8) (classcode >> 16) & 0xFF;
++				subc = (u8) (classcode >> 8) & 0xFF;
++				if (b_bridgechk && (venId != vendorid) && (basec == basecode) && (subc == subclass))
++					return _TRUE;
++
++				// Check Vendor ID
++				if (b_bridgechk && (venId != vendorid) && (vendorid != U2DONTCARE))
++					continue;
++
++				// Check Device ID
++				if (b_bridgechk && (devId != deviceid) && (deviceid != U2DONTCARE))
++					continue;
++
++				// Check irql
++				if (b_bridgechk && (irqline != irql) && (irql != U1DONTCARE))
++					continue;
++
++				//4 get field 0x19 value  (DWORD #6)
++				NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + (6 << 2));
++				NdisRawReadPortUlong(PCI_CONF_DATA, &field19);
++				field19 = (field19 >> 8) & 0xFF;
++
++				//4 Matching Class Code and filed19.
++				if ((basec == basecode) && (subc == subclass) && ((field19 == filed19val) || (filed19val == U1DONTCARE))) {
++					*busnum = busnum_idx;
++					*devnum = devicenum_idx;
++					*funcnum = functionnum_idx;
++
++					DBG_871X("GetPciBusInfo(): Find Device(%X:%X)  bus=%d dev=%d, func=%d\n",
++						vendorid, deviceid, busnum_idx, devicenum_idx, functionnum_idx);
++					return _TRUE;
++				}
++			}
++		}
++	}
++
++	DBG_871X("GetPciBusInfo(): Cannot Find Device(%X:%X:%X)\n", vendorid, deviceid, dev_venid);
++
++	return _FALSE;
++}
++
++static u8
++rtw_get_pci_brideg_info(_adapter *padapter,
++			     u8 basecode,
++			     u8 subclass,
++			     u8 filed19val, u8 * busnum, u8 * devnum,
++			     u8 * funcnum, u16 * vendorid, u16 * deviceid)
++{
++	u8	busnum_idx, devicenum_idx, functionnum_idx;
++	u32	pcicfg_addrport = 0;
++	u32	dev_venid, classcode, field19, headertype;
++	u16	venId, devId;
++	u8	basec, subc, irqline;
++	u16	regoffset;
++	u8	b_singlefunc = _FALSE;
++
++	*busnum = 0xFF;
++	*devnum = 0xFF;
++	*funcnum = 0xFF;
++
++	// perform a complete pci bus scan operation
++	for (busnum_idx = 0; busnum_idx < PCI_MAX_BRIDGE_NUMBER; busnum_idx++)	//255
++	{
++		for (devicenum_idx = 0; devicenum_idx < PCI_MAX_DEVICES; devicenum_idx++)	//32
++		{
++			b_singlefunc = _FALSE;
++			for (functionnum_idx = 0; functionnum_idx < PCI_MAX_FUNCTION; functionnum_idx++)	//8
++			{
++				//
++				// <Roger_Notes> We have to skip redundant Bus scan to prevent unexpected system hang
++				// if single function is present in this device.
++				// 2009.02.26.
++				//
++				if (functionnum_idx == 0)
++				{
++					//4 get header type (DWORD #3)
++					pcicfg_addrport = (busnum_idx << 16) | (devicenum_idx << 11) | (functionnum_idx << 8) | (1 << 31);
++					//NdisRawWritePortUlong((ULONG_PTR)PCI_CONF_ADDRESS ,  pcicfg_addrport + (3 << 2));
++					//NdisRawReadPortUlong((ULONG_PTR)PCI_CONF_DATA, &headertype);
++					NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + (3 << 2));
++					NdisRawReadPortUlong(PCI_CONF_DATA, &headertype);
++					headertype = ((headertype >> 16) & 0x0080) >> 7;	// address 0x0e[7].
++					if (headertype == 0)	//Single function
++						b_singlefunc = _TRUE;
++				}
++				else
++				{//By pass the following scan process.
++					if (b_singlefunc == _TRUE)
++						break;
++				}
++
++				pcicfg_addrport = (busnum_idx << 16) | (devicenum_idx << 11) | (functionnum_idx << 8) | (1 << 31);
++
++				//4 // Get vendorid/ deviceid
++				// set up address port at 0xCF8 offset field= 0 (dev|vend)
++				NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport);
++				// now grab data port with device|vendor 4 byte dword
++				NdisRawReadPortUlong(PCI_CONF_DATA, &dev_venid);
++
++				//4 Get irql
++				regoffset = 0x3C;
++				pcicfg_addrport = (busnum_idx << 16) | (devicenum_idx << 11) | (functionnum_idx << 8) | (1 << 31) | (regoffset & 0xFFFFFFFC);
++				NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport);
++				NdisRawReadPortUchar((PCI_CONF_DATA + (regoffset & 0x3)), &irqline);
++
++				venId = (u16) (dev_venid >> 0) & 0xFFFF;
++				devId = (u16) (dev_venid >> 16) & 0xFFFF;
++
++				//4 get Class Code
++				pcicfg_addrport = (busnum_idx << 16) | (devicenum_idx << 11) | (functionnum_idx << 8) | (1 << 31);
++				NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + (2 << 2));
++				NdisRawReadPortUlong(PCI_CONF_DATA, &classcode);
++				classcode = classcode >> 8;
++
++				basec = (u8) (classcode >> 16) & 0xFF;
++				subc = (u8) (classcode >> 8) & 0xFF;
++
++				//4 get field 0x19 value  (DWORD #6)
++				NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + (6 << 2));
++				NdisRawReadPortUlong(PCI_CONF_DATA, &field19);
++				field19 = (field19 >> 8) & 0xFF;
++
++				//4 Matching Class Code and filed19.
++				if ((basec == basecode) && (subc == subclass) && ((field19 == filed19val) || (filed19val == U1DONTCARE))) {
++					*busnum = busnum_idx;
++					*devnum = devicenum_idx;
++					*funcnum = functionnum_idx;
++					*vendorid = venId;
++					*deviceid = devId;
++
++					DBG_871X("GetPciBridegInfo : Find Device(%X:%X)  bus=%d dev=%d, func=%d\n",
++						venId, devId, busnum_idx, devicenum_idx, functionnum_idx);
++
++					return _TRUE;
++				}
++			}
++		}
++	}
++
++	DBG_871X("GetPciBridegInfo(): Cannot Find PciBridge for Device\n");
++
++	return _FALSE;
++}				// end of GetPciBridegInfo
++
++//
++//Description:
++//To find specific bridge information.
++//
++static void rtw_find_bridge_info(_adapter *padapter)
++{
++	struct dvobj_priv	*pdvobjpriv = adapter_to_dvobj(padapter);
++	struct pci_priv	*pcipriv = &(pdvobjpriv->pcipriv);
++	u8	pcibridge_busnum = 0xff;
++	u8	pcibridge_devnum = 0xff;
++	u8	pcibridge_funcnum = 0xff;
++	u16	pcibridge_vendorid = 0xff;
++	u16	pcibridge_deviceid = 0xff;
++	u8	tmp = 0;
++
++	rtw_get_pci_brideg_info(padapter,
++				     PCI_CLASS_BRIDGE_DEV,
++				     PCI_SUBCLASS_BR_PCI_TO_PCI,
++				     pcipriv->busnumber,
++				     &pcibridge_busnum,
++				     &pcibridge_devnum, &pcibridge_funcnum,
++				     &pcibridge_vendorid, &pcibridge_deviceid);
++
++	// match the array of vendor id and regonize which chipset is used.
++	pcipriv->pcibridge_vendor = PCI_BRIDGE_VENDOR_UNKNOWN;
++
++	for (tmp = 0; tmp < PCI_BRIDGE_VENDOR_MAX; tmp++) {
++		if (pcibridge_vendorid == pcibridge_vendors[tmp]) {
++			pcipriv->pcibridge_vendor = tmp;
++			DBG_871X("Pci Bridge Vendor is found index: %d\n", tmp);
++			break;
++		}
++	}
++	DBG_871X("Pci Bridge Vendor is %x\n", pcibridge_vendors[tmp]);
++
++	// Update corresponding PCI bus info.
++	pcipriv->pcibridge_busnum = pcibridge_busnum;
++	pcipriv->pcibridge_devnum = pcibridge_devnum;
++	pcipriv->pcibridge_funcnum = pcibridge_funcnum;
++	pcipriv->pcibridge_vendorid = pcibridge_vendorid;
++	pcipriv->pcibridge_deviceid = pcibridge_deviceid;
++
++}
++
++static u8
++rtw_get_amd_l1_patch(_adapter *padapter, u8 busnum, u8 devnum,
++			  u8 funcnum)
++{
++	u8	status = _FALSE;
++	u8	offset_e0;
++	unsigned	offset_e4;
++	u32	pcicfg_addrport = 0;
++
++	pcicfg_addrport = (busnum << 16) | (devnum << 11) | (funcnum << 8) | (1 << 31);
++
++	NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + 0xE0);
++	NdisRawWritePortUchar(PCI_CONF_DATA, 0xA0);
++
++	NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + 0xE0);
++	NdisRawReadPortUchar(PCI_CONF_DATA, &offset_e0);
++
++	if (offset_e0 == 0xA0)
++	{
++		NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + 0xE4);
++		NdisRawReadPortUlong(PCI_CONF_DATA, &offset_e4);
++		//DbgPrint("Offset E4 %x\n", offset_e4);
++		if (offset_e4 & BIT(23))
++			status = _TRUE;
++	}
++
++	return status;
++}
++#else
++/*Disable RTL8192SE ASPM & Disable Pci Bridge ASPM*/
++void rtw_pci_disable_aspm(_adapter *padapter)
++{
++	struct dvobj_priv	*pdvobjpriv = adapter_to_dvobj(padapter);
++	struct pwrctrl_priv	*pwrpriv = &padapter->pwrctrlpriv;
++	struct pci_dev	*pdev = pdvobjpriv->ppcidev;
++	struct pci_dev	*bridge_pdev = pdev->bus->self;
++	struct pci_priv	*pcipriv = &(pdvobjpriv->pcipriv);
++	u8	linkctrl_reg;
++	u16	pcibridge_linkctrlreg;
++	u16	aspmlevel = 0;
++
++	// We do not diable/enable ASPM by driver, in the future, the BIOS will enable host and NIC ASPM.
++	// Advertised by SD1 victorh. Added by tynli. 2009.11.23.
++	if(pdvobjpriv->const_pci_aspm == 0)
++		return;
++
++	if(!padapter->hw_init_completed)
++		return;
++
++	if (pcipriv->pcibridge_vendor == PCI_BRIDGE_VENDOR_UNKNOWN) {
++		RT_TRACE(_module_hci_intfs_c_, _drv_err_, ("%s(): PCI(Bridge) UNKNOWN.\n", __FUNCTION__));
++		return;
++	}
++
++	linkctrl_reg = pcipriv->linkctrl_reg;
++	pcibridge_linkctrlreg = pcipriv->pcibridge_linkctrlreg;
++
++	// Set corresponding value.
++	aspmlevel |= BIT(0) | BIT(1);
++	linkctrl_reg &=~aspmlevel;
++	pcibridge_linkctrlreg &=~aspmlevel;
++
++	if (pwrpriv->reg_rfps_level & RT_RF_OFF_LEVL_CLK_REQ) {
++		RT_CLEAR_PS_LEVEL(pwrpriv, RT_RF_OFF_LEVL_CLK_REQ);
++		rtw_pci_switch_clk_req(padapter, 0x0);
++	}
++
++	{
++		/*for promising device will in L0 state after an I/O.*/
++		u8 tmp_u1b;
++		pci_read_config_byte(pdev, 0x80, &tmp_u1b);
++	}
++
++	rtw_pci_platform_switch_device_pci_aspm(padapter, linkctrl_reg);
++	rtw_udelay_os(50);
++
++	//When there exists anyone's BusNum, DevNum, and FuncNum that are set to 0xff,
++	// we do not execute any action and return. Added by tynli.
++	if( (pcipriv->busnumber == 0xff && pcipriv->devnumber == 0xff && pcipriv->funcnumber == 0xff) ||
++		(pcipriv->pcibridge_busnum == 0xff && pcipriv->pcibridge_devnum == 0xff && pcipriv->pcibridge_funcnum == 0xff) )
++	{
++		// Do Nothing!!
++	}
++	else
++	{
++		/*Disable Pci Bridge ASPM*/
++		//NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + (num4bytes << 2));
++		//NdisRawWritePortUchar(PCI_CONF_DATA, pcibridge_linkctrlreg);
++		pci_write_config_byte(bridge_pdev, pcipriv->pcibridge_pciehdr_offset + 0x10, pcibridge_linkctrlreg);
++
++		DBG_871X("rtw_pci_disable_aspm():PciBridge busnumber[%x], DevNumbe[%x], funcnumber[%x], Write reg[%x] = %x\n",
++			pcipriv->pcibridge_busnum, pcipriv->pcibridge_devnum,
++			pcipriv->pcibridge_funcnum,
++			(pcipriv->pcibridge_pciehdr_offset+0x10), pcibridge_linkctrlreg);
++
++		rtw_udelay_os(50);
++	}
++
++}
++
++/*Enable RTL8192SE ASPM & Enable Pci Bridge ASPM for
++power saving We should follow the sequence to enable
++RTL8192SE first then enable Pci Bridge ASPM
++or the system will show bluescreen.*/
++void rtw_pci_enable_aspm(_adapter *padapter)
++{
++	struct dvobj_priv	*pdvobjpriv = adapter_to_dvobj(padapter);
++	struct pwrctrl_priv	*pwrpriv = &padapter->pwrctrlpriv;
++	struct pci_dev	*pdev = pdvobjpriv->ppcidev;
++	struct pci_dev	*bridge_pdev = pdev->bus->self;
++	struct pci_priv	*pcipriv = &(pdvobjpriv->pcipriv);
++	u16	aspmlevel = 0;
++	u8	u_pcibridge_aspmsetting = 0;
++	u8	u_device_aspmsetting = 0;
++	u32	u_device_aspmsupportsetting = 0;
++
++	// We do not diable/enable ASPM by driver, in the future, the BIOS will enable host and NIC ASPM.
++	// Advertised by SD1 victorh. Added by tynli. 2009.11.23.
++	if(pdvobjpriv->const_pci_aspm == 0)
++		return;
++
++	//When there exists anyone's BusNum, DevNum, and FuncNum that are set to 0xff,
++	// we do not execute any action and return. Added by tynli.
++	if( (pcipriv->busnumber == 0xff && pcipriv->devnumber == 0xff && pcipriv->funcnumber == 0xff) ||
++		(pcipriv->pcibridge_busnum == 0xff && pcipriv->pcibridge_devnum == 0xff && pcipriv->pcibridge_funcnum == 0xff) )
++	{
++		DBG_871X("rtw_pci_enable_aspm(): Fail to enable ASPM. Cannot find the Bus of PCI(Bridge).\n");
++		return;
++	}
++
++//Get Bridge ASPM Support
++//not to enable bridge aspm if bridge does not support
++//Added by sherry 20100803
++	if (IS_HARDWARE_TYPE_8192DE(padapter))
++	{
++		//PciCfgAddrPort = (pcipriv->pcibridge_busnum << 16)|(pcipriv->pcibridge_devnum<< 11)|(pcipriv->pcibridge_funcnum <<  8)|(1 << 31);
++		//Num4Bytes = (pcipriv->pcibridge_pciehdr_offset+0x0C)/4;
++		//NdisRawWritePortUlong((ULONG_PTR)PCI_CONF_ADDRESS , PciCfgAddrPort+(Num4Bytes << 2));
++		//NdisRawReadPortUlong((ULONG_PTR)PCI_CONF_DATA,&uDeviceASPMSupportSetting);
++		pci_read_config_dword(bridge_pdev, (pcipriv->pcibridge_pciehdr_offset+0x0C), &u_device_aspmsupportsetting);
++		DBG_871X("rtw_pci_enable_aspm(): Bridge ASPM support %x \n",u_device_aspmsupportsetting);
++		if(((u_device_aspmsupportsetting & BIT(11)) != BIT(11)) || ((u_device_aspmsupportsetting & BIT(10)) != BIT(10)))
++		{
++			if(pdvobjpriv->const_devicepci_aspm_setting == 3)
++			{
++				DBG_871X("rtw_pci_enable_aspm(): Bridge not support L0S or L1\n");
++				return;
++			}
++			else if(pdvobjpriv->const_devicepci_aspm_setting == 2)
++			{
++				if((u_device_aspmsupportsetting & BIT(11)) != BIT(11))
++				{
++					DBG_871X("rtw_pci_enable_aspm(): Bridge not support L1 \n");
++					return;
++				}
++			}
++			else if(pdvobjpriv->const_devicepci_aspm_setting == 1)
++			{
++				if((u_device_aspmsupportsetting & BIT(10)) != BIT(10))
++				{
++					DBG_871X("rtw_pci_enable_aspm(): Bridge not support L0s \n");
++					return;
++				}
++
++			}
++		}
++		else
++		{
++			DBG_871X("rtw_pci_enable_aspm(): Bridge support L0s and L1 \n");
++		}
++	}
++
++
++	/*Enable Pci Bridge ASPM*/
++	//PciCfgAddrPort = (pcipriv->pcibridge_busnum << 16)|(pcipriv->pcibridge_devnum<< 11) |(pcipriv->pcibridge_funcnum <<  8)|(1 << 31);
++	//Num4Bytes = (pcipriv->pcibridge_pciehdr_offset+0x10)/4;
++	// set up address port at 0xCF8 offset field= 0 (dev|vend)
++	//NdisRawWritePortUlong(PCI_CONF_ADDRESS, PciCfgAddrPort + (Num4Bytes << 2));
++	// now grab data port with device|vendor 4 byte dword
++
++	u_pcibridge_aspmsetting = pcipriv->pcibridge_linkctrlreg;
++	u_pcibridge_aspmsetting |= pdvobjpriv->const_hostpci_aspm_setting;
++
++	if (pcipriv->pcibridge_vendor == PCI_BRIDGE_VENDOR_INTEL ||
++		pcipriv->pcibridge_vendor == PCI_BRIDGE_VENDOR_SIS )
++		u_pcibridge_aspmsetting &= ~BIT(0); // for intel host 42 device 43
++
++	//NdisRawWritePortUchar(PCI_CONF_DATA, u_pcibridge_aspmsetting);
++	pci_write_config_byte(bridge_pdev, (pcipriv->pcibridge_pciehdr_offset+0x10), u_pcibridge_aspmsetting);
++
++	DBG_871X("PlatformEnableASPM():PciBridge busnumber[%x], DevNumbe[%x], funcnumber[%x], Write reg[%x] = %x\n",
++		pcipriv->pcibridge_busnum, pcipriv->pcibridge_devnum, pcipriv->pcibridge_funcnum,
++		(pcipriv->pcibridge_pciehdr_offset+0x10),
++		u_pcibridge_aspmsetting);
++
++	rtw_udelay_os(50);
++
++	/*Get ASPM level (with/without Clock Req)*/
++	aspmlevel |= pdvobjpriv->const_devicepci_aspm_setting;
++	u_device_aspmsetting = pcipriv->linkctrl_reg;
++	u_device_aspmsetting |= aspmlevel; // device 43
++
++	rtw_pci_platform_switch_device_pci_aspm(padapter, u_device_aspmsetting);
++
++	if (pwrpriv->reg_rfps_level & RT_RF_OFF_LEVL_CLK_REQ) {
++		rtw_pci_switch_clk_req(padapter, (pwrpriv->reg_rfps_level & RT_RF_OFF_LEVL_CLK_REQ) ? 1 : 0);
++		RT_SET_PS_LEVEL(pwrpriv, RT_RF_OFF_LEVL_CLK_REQ);
++	}
++
++	rtw_udelay_os(50);
++}
++
++static u8 rtw_pci_get_amd_l1_patch(struct dvobj_priv *dvobj)
++{
++	struct pci_dev	*pdev = dvobj->ppcidev;
++	struct pci_dev	*bridge_pdev = pdev->bus->self;
++	u8	status = _FALSE;
++	u8	offset_e0;
++	u32	offset_e4;
++
++	//NdisRawWritePortUlong(PCI_CONF_ADDRESS,pcicfg_addrport + 0xE0);
++	//NdisRawWritePortUchar(PCI_CONF_DATA, 0xA0);
++	pci_write_config_byte(bridge_pdev, 0xE0, 0xA0);
++
++	//NdisRawWritePortUlong(PCI_CONF_ADDRESS,pcicfg_addrport + 0xE0);
++	//NdisRawReadPortUchar(PCI_CONF_DATA, &offset_e0);
++	pci_read_config_byte(bridge_pdev, 0xE0, &offset_e0);
++
++	if (offset_e0 == 0xA0) {
++		//NdisRawWritePortUlong(PCI_CONF_ADDRESS, pcicfg_addrport + 0xE4);
++		//NdisRawReadPortUlong(PCI_CONF_DATA, &offset_e4);
++		pci_read_config_dword(bridge_pdev, 0xE4, &offset_e4);
++		if (offset_e4 & BIT(23))
++			status = _TRUE;
++	}
++
++	return status;
++}
++
++static void rtw_pci_get_linkcontrol_field(struct dvobj_priv *dvobj)
++{
++	struct pci_priv	*pcipriv = &(dvobj->pcipriv);
++	struct pci_dev	*pdev = dvobj->ppcidev;
++	struct pci_dev	*bridge_pdev = pdev->bus->self;
++	u8	capabilityoffset = pcipriv->pcibridge_pciehdr_offset;
++	u8	linkctrl_reg;
++
++	/*Read  Link Control Register*/
++	pci_read_config_byte(bridge_pdev, capabilityoffset + PCI_EXP_LNKCTL, &linkctrl_reg);
++
++	pcipriv->pcibridge_linkctrlreg = linkctrl_reg;
++}
++#endif
++
++static void rtw_pci_parse_configuration(struct dvobj_priv *dvobj)
++{
++	struct pci_dev	*pdev = dvobj->ppcidev;
++	struct pci_priv	*pcipriv = &(dvobj->pcipriv);
++	u8 tmp;
++	int pos;
++	u8 linkctrl_reg;
++
++	//Link Control Register
++	pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
++	pci_read_config_byte(pdev, pos + PCI_EXP_LNKCTL, &linkctrl_reg);
++	pcipriv->linkctrl_reg = linkctrl_reg;
++
++	//DBG_871X("Link Control Register = %x\n", pcipriv->linkctrl_reg);
++
++	pci_read_config_byte(pdev, 0x98, &tmp);
++	tmp |= BIT(4);
++	pci_write_config_byte(pdev, 0x98, tmp);
++
++	//tmp = 0x17;
++	//pci_write_config_byte(pdev, 0x70f, tmp);
++}
++
++//
++// Update PCI dependent default settings.
++//
++static void rtw_pci_update_default_setting(_adapter *padapter)
++{
++	struct dvobj_priv	*pdvobjpriv = adapter_to_dvobj(padapter);
++	struct pci_priv	*pcipriv = &(pdvobjpriv->pcipriv);
++	struct pwrctrl_priv	*pwrpriv = &padapter->pwrctrlpriv;
++
++	//reset pPSC->reg_rfps_level & priv->b_support_aspm
++	pwrpriv->reg_rfps_level = 0;
++	pwrpriv->b_support_aspm = 0;
++
++	// Dynamic Mechanism,
++	//rtw_hal_set_def_var(pAdapter, HAL_DEF_INIT_GAIN, &(pDevice->InitGainState));
++
++	// Update PCI ASPM setting
++	pwrpriv->const_amdpci_aspm = pdvobjpriv->const_amdpci_aspm;
++	switch (pdvobjpriv->const_pci_aspm) {
++		case 0:		// No ASPM
++			break;
++
++		case 1:		// ASPM dynamically enabled/disable.
++			pwrpriv->reg_rfps_level |= RT_RF_LPS_LEVEL_ASPM;
++			break;
++
++		case 2:		// ASPM with Clock Req dynamically enabled/disable.
++			pwrpriv->reg_rfps_level |= (RT_RF_LPS_LEVEL_ASPM | RT_RF_OFF_LEVL_CLK_REQ);
++			break;
++
++		case 3:		// Always enable ASPM and Clock Req from initialization to halt.
++			pwrpriv->reg_rfps_level &= ~(RT_RF_LPS_LEVEL_ASPM);
++			pwrpriv->reg_rfps_level |= (RT_RF_PS_LEVEL_ALWAYS_ASPM | RT_RF_OFF_LEVL_CLK_REQ);
++			break;
++
++		case 4:		// Always enable ASPM without Clock Req from initialization to halt.
++			pwrpriv->reg_rfps_level &= ~(RT_RF_LPS_LEVEL_ASPM | RT_RF_OFF_LEVL_CLK_REQ);
++			pwrpriv->reg_rfps_level |= RT_RF_PS_LEVEL_ALWAYS_ASPM;
++			break;
++	}
++
++	pwrpriv->reg_rfps_level |= RT_RF_OFF_LEVL_HALT_NIC;
++
++	// Update Radio OFF setting
++	switch (pdvobjpriv->const_hwsw_rfoff_d3) {
++		case 1:
++			if (pwrpriv->reg_rfps_level & RT_RF_LPS_LEVEL_ASPM)
++				pwrpriv->reg_rfps_level |= RT_RF_OFF_LEVL_ASPM;
++			break;
++
++		case 2:
++			if (pwrpriv->reg_rfps_level & RT_RF_LPS_LEVEL_ASPM)
++				pwrpriv->reg_rfps_level |= RT_RF_OFF_LEVL_ASPM;
++			pwrpriv->reg_rfps_level |= RT_RF_OFF_LEVL_HALT_NIC;
++			break;
++
++		case 3:
++			pwrpriv->reg_rfps_level |= RT_RF_OFF_LEVL_PCI_D3;
++			break;
++	}
++
++	// Update Rx 2R setting
++	//pPSC->reg_rfps_level |= ((pDevice->RegLPS2RDisable) ? RT_RF_LPS_DISALBE_2R : 0);
++
++	//
++	// Set HW definition to determine if it supports ASPM.
++	//
++	switch (pdvobjpriv->const_support_pciaspm) {
++		case 0:	// Not support ASPM.
++			{
++				u8	b_support_aspm = _FALSE;
++				pwrpriv->b_support_aspm = b_support_aspm;
++			}
++			break;
++
++		case 1:	// Support ASPM.
++			{
++				u8	b_support_aspm = _TRUE;
++				u8	b_support_backdoor = _TRUE;
++
++				pwrpriv->b_support_aspm = b_support_aspm;
++
++				/*if(pAdapter->MgntInfo.CustomerID == RT_CID_TOSHIBA &&
++					pcipriv->pcibridge_vendor == PCI_BRIDGE_VENDOR_AMD &&
++					!pcipriv->amd_l1_patch)
++					b_support_backdoor = _FALSE;*/
++
++				pwrpriv->b_support_backdoor = b_support_backdoor;
++			}
++			break;
++
++		case 2:	// Set by Chipset.
++			// ASPM value set by chipset.
++			if (pcipriv->pcibridge_vendor == PCI_BRIDGE_VENDOR_INTEL) {
++				u8	b_support_aspm = _TRUE;
++				pwrpriv->b_support_aspm = b_support_aspm;
++			}
++			break;
++
++		default:
++			// Do nothing. Set when finding the chipset.
++			break;
++	}
++}
++
++static void rtw_pci_initialize_adapter_common(_adapter *padapter)
++{
++	struct pwrctrl_priv	*pwrpriv = &padapter->pwrctrlpriv;
++
++	rtw_pci_update_default_setting(padapter);
++
++	if (pwrpriv->reg_rfps_level & RT_RF_PS_LEVEL_ALWAYS_ASPM) {
++		// Always enable ASPM & Clock Req.
++		rtw_pci_enable_aspm(padapter);
++		RT_SET_PS_LEVEL(pwrpriv, RT_RF_PS_LEVEL_ALWAYS_ASPM);
++	}
++
++}
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)) || (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18))
++#define rtw_pci_interrupt(x,y,z) rtw_pci_interrupt(x,y)
++#endif
++
++static irqreturn_t rtw_pci_interrupt(int irq, void *priv, struct pt_regs *regs)
++{
++	struct dvobj_priv *dvobj = (struct dvobj_priv *)priv;
++	_adapter *adapter = dvobj->if1;
++
++	if (dvobj->irq_enabled == 0) {
++		return IRQ_HANDLED;
++	}
++
++	if(rtw_hal_interrupt_handler(adapter) == _FAIL)
++		return IRQ_HANDLED;
++		//return IRQ_NONE;
++
++	return IRQ_HANDLED;
++}
++
++#ifdef RTK_DMP_PLATFORM
++#define pci_iounmap(x,y) iounmap(y)
++#endif
++
++int pci_alloc_irq(struct dvobj_priv *dvobj)
++{
++	int err;
++	struct pci_dev *pdev = dvobj->ppcidev;
++
++#if defined(IRQF_SHARED)
++	err = request_irq(pdev->irq, &rtw_pci_interrupt, IRQF_SHARED, DRV_NAME, dvobj);
++#else
++	err = request_irq(pdev->irq, &rtw_pci_interrupt, SA_SHIRQ, DRV_NAME, dvobj);
++#endif
++	if (err) {
++		DBG_871X("Error allocating IRQ %d",pdev->irq);
++	} else {
++		dvobj->irq_alloc = 1;
++		DBG_871X("Request_irq OK, IRQ %d\n",pdev->irq);
++	}
++
++	return err?_FAIL:_SUCCESS;
++}
++
++static struct dvobj_priv *pci_dvobj_init(struct pci_dev *pdev)
++{
++	int err;
++	u32	status = _FAIL;
++	struct dvobj_priv *dvobj = NULL;
++	struct pci_priv	*pcipriv = NULL;
++	struct pci_dev *bridge_pdev = pdev->bus->self;
++	unsigned long pmem_start, pmem_len, pmem_flags;
++	u8	tmp;
++
++_func_enter_;
++
++	if ((dvobj = devobj_init()) == NULL) {
++		goto exit;
++	}
++	dvobj->ppcidev = pdev;
++	pcipriv = &(dvobj->pcipriv);
++	pci_set_drvdata(pdev, dvobj);
++
++	if ( (err = pci_enable_device(pdev)) != 0) {
++		DBG_871X(KERN_ERR "%s : Cannot enable new PCI device\n", pci_name(pdev));
++		goto free_dvobj;
++	}
++
++#ifdef CONFIG_64BIT_DMA
++	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
++		DBG_871X("RTL819xCE: Using 64bit DMA\n");
++		if ((err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) != 0) {
++			DBG_871X(KERN_ERR "Unable to obtain 64bit DMA for consistent allocations\n");
++			goto disable_picdev;
++		}
++		dvobj->bdma64 = _TRUE;
++	} else
++#endif
++	{
++		if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
++			if ((err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) != 0) {
++				DBG_871X(KERN_ERR "Unable to obtain 32bit DMA for consistent allocations\n");
++				goto disable_picdev;
++			}
++		}
++	}
++
++	pci_set_master(pdev);
++
++	if ((err = pci_request_regions(pdev, DRV_NAME)) != 0) {
++		DBG_871X(KERN_ERR "Can't obtain PCI resources\n");
++		goto disable_picdev;
++	}
++	//MEM map
++	pmem_start = pci_resource_start(pdev, 2);
++	pmem_len = pci_resource_len(pdev, 2);
++	pmem_flags = pci_resource_flags(pdev, 2);
++
++#ifdef RTK_DMP_PLATFORM
++	dvobj->pci_mem_start = (unsigned long)ioremap_nocache(pmem_start, pmem_len);
++#else
++	dvobj->pci_mem_start = (unsigned long)pci_iomap(pdev, 2, pmem_len); /* shared mem start */
++#endif
++	if (dvobj->pci_mem_start == 0) {
++		DBG_871X(KERN_ERR "Can't map PCI mem\n");
++		goto release_regions;
++	}
++
++	DBG_871X("Memory mapped space start: 0x%08lx len:%08lx flags:%08lx, after map:0x%08lx\n",
++		pmem_start, pmem_len, pmem_flags, dvobj->pci_mem_start);
++
++	// Disable Clk Request */
++	pci_write_config_byte(pdev, 0x81, 0);
++	// leave D3 mode */
++	pci_write_config_byte(pdev, 0x44, 0);
++	pci_write_config_byte(pdev, 0x04, 0x06);
++	pci_write_config_byte(pdev, 0x04, 0x07);
++
++
++#if 1
++	/*find bus info*/
++	pcipriv->busnumber = pdev->bus->number;
++	pcipriv->devnumber = PCI_SLOT(pdev->devfn);
++	pcipriv->funcnumber = PCI_FUNC(pdev->devfn);
++
++	/*find bridge info*/
++	pcipriv->pcibridge_vendor = PCI_BRIDGE_VENDOR_UNKNOWN;
++	if(bridge_pdev){
++		pcipriv->pcibridge_vendorid = bridge_pdev->vendor;
++		for (tmp = 0; tmp < PCI_BRIDGE_VENDOR_MAX; tmp++) {
++			if (bridge_pdev->vendor == pcibridge_vendors[tmp]) {
++				pcipriv->pcibridge_vendor = tmp;
++				DBG_871X("Pci Bridge Vendor is found index: %d, %x\n", tmp, pcibridge_vendors[tmp]);
++				break;
++			}
++		}
++	}
++
++	//if (pcipriv->pcibridge_vendor != PCI_BRIDGE_VENDOR_UNKNOWN) {
++	if(bridge_pdev){
++		pcipriv->pcibridge_busnum = bridge_pdev->bus->number;
++		pcipriv->pcibridge_devnum = PCI_SLOT(bridge_pdev->devfn);
++		pcipriv->pcibridge_funcnum = PCI_FUNC(bridge_pdev->devfn);
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,34))
++		pcipriv->pcibridge_pciehdr_offset = pci_find_capability(bridge_pdev, PCI_CAP_ID_EXP);
++#else
++		pcipriv->pcibridge_pciehdr_offset = bridge_pdev->pcie_cap;
++#endif
++
++		rtw_pci_get_linkcontrol_field(dvobj);
++
++		if (pcipriv->pcibridge_vendor == PCI_BRIDGE_VENDOR_AMD) {
++			pcipriv->amd_l1_patch = rtw_pci_get_amd_l1_patch(dvobj);
++		}
++	}
++#else
++	//
++	// Find bridge related info.
++	//
++	rtw_get_pci_bus_info(padapter,
++				  pdev->vendor,
++				  pdev->device,
++				  (u8) pdvobjpriv->irqline,
++				  0x02, 0x80, U1DONTCARE,
++				  &pcipriv->busnumber,
++				  &pcipriv->devnumber,
++				  &pcipriv->funcnumber);
++
++	rtw_find_bridge_info(padapter);
++
++	if (pcipriv->pcibridge_vendor != PCI_BRIDGE_VENDOR_UNKNOWN) {
++		rtw_get_link_control_field(padapter,
++						pcipriv->pcibridge_busnum,
++						pcipriv->pcibridge_devnum,
++						pcipriv->pcibridge_funcnum);
++
++		if (pcipriv->pcibridge_vendor == PCI_BRIDGE_VENDOR_AMD) {
++			pcipriv->amd_l1_patch =
++				rtw_get_amd_l1_patch(padapter,
++							pcipriv->pcibridge_busnum,
++							pcipriv->pcibridge_devnum,
++							pcipriv->pcibridge_funcnum);
++		}
++	}
++#endif
++
++	//
++	// Allow the hardware to look at PCI config information.
++	//
++	rtw_pci_parse_configuration(dvobj);
++
++	DBG_871X("pcidev busnumber:devnumber:funcnumber:"
++		"vendor:link_ctl %d:%d:%d:%x:%x\n",
++		pcipriv->busnumber,
++		pcipriv->devnumber,
++		pcipriv->funcnumber,
++		pdev->vendor,
++		pcipriv->linkctrl_reg);
++
++	DBG_871X("pci_bridge busnumber:devnumber:funcnumber:vendor:"
++		"pcie_cap:link_ctl_reg: %d:%d:%d:%x:%x:%x:%x\n",
++		pcipriv->pcibridge_busnum,
++		pcipriv->pcibridge_devnum,
++		pcipriv->pcibridge_funcnum,
++		pcibridge_vendors[pcipriv->pcibridge_vendor],
++		pcipriv->pcibridge_pciehdr_offset,
++		pcipriv->pcibridge_linkctrlreg,
++		pcipriv->amd_l1_patch);
++
++	status = _SUCCESS;
++
++iounmap:
++	if (status != _SUCCESS && dvobj->pci_mem_start != 0) {
++		pci_iounmap(pdev, (void *)dvobj->pci_mem_start);
++		dvobj->pci_mem_start = 0;
++	}
++release_regions:
++	if (status != _SUCCESS)
++		pci_release_regions(pdev);
++disable_picdev:
++	if (status != _SUCCESS)
++		pci_disable_device(pdev);
++free_dvobj:
++	if (status != _SUCCESS && dvobj) {
++		pci_set_drvdata(pdev, NULL);
++		devobj_deinit(dvobj);
++		dvobj = NULL;
++	}
++exit:
++_func_exit_;
++	return dvobj;
++}
++
++static void pci_dvobj_deinit(struct pci_dev *pdev)
++{
++	struct dvobj_priv *dvobj = pci_get_drvdata(pdev);
++_func_enter_;
++
++	pci_set_drvdata(pdev, NULL);
++	if (dvobj) {
++		if (dvobj->irq_alloc) {
++			free_irq(pdev->irq, dvobj);
++			dvobj->irq_alloc = 0;
++		}
++
++		if (dvobj->pci_mem_start != 0) {
++			pci_iounmap(pdev, (void *)dvobj->pci_mem_start);
++			dvobj->pci_mem_start = 0;
++		}
++
++		devobj_deinit(dvobj);
++	}
++
++	pci_release_regions(pdev);
++	pci_disable_device(pdev);
++
++_func_exit_;
++}
++
++static void decide_chip_type_by_pci_device_id(_adapter *padapter, struct pci_dev *pdev)
++{
++	u16	venderid, deviceid, irqline;
++	u8	revisionid;
++	struct dvobj_priv	*pdvobjpriv = adapter_to_dvobj(padapter);
++
++
++	venderid = pdev->vendor;
++	deviceid = pdev->device;
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23))
++	pci_read_config_byte(pdev, PCI_REVISION_ID, &revisionid); // PCI_REVISION_ID 0x08
++#else
++	revisionid = pdev->revision;
++#endif
++	pci_read_config_word(pdev, PCI_INTERRUPT_LINE, &irqline); // PCI_INTERRUPT_LINE 0x3c
++	pdvobjpriv->irqline = irqline;
++
++
++	//
++	// Decide hardware type here.
++	//
++	if( deviceid == HAL_HW_PCI_8185_DEVICE_ID ||
++	    deviceid == HAL_HW_PCI_8188_DEVICE_ID ||
++	    deviceid == HAL_HW_PCI_8198_DEVICE_ID)
++	{
++		DBG_871X("Adapter (8185/8185B) is found- VendorID/DeviceID=%x/%x\n", venderid, deviceid);
++		padapter->HardwareType=HARDWARE_TYPE_RTL8185;
++	}
++	else if (deviceid == HAL_HW_PCI_8190_DEVICE_ID ||
++		deviceid == HAL_HW_PCI_0045_DEVICE_ID ||
++		deviceid == HAL_HW_PCI_0046_DEVICE_ID ||
++		deviceid == HAL_HW_PCI_DLINK_DEVICE_ID)
++	{
++		DBG_871X("Adapter(8190 PCI) is found - vendorid/deviceid=%x/%x\n", venderid, deviceid);
++		padapter->HardwareType = HARDWARE_TYPE_RTL8190P;
++	}
++	else if (deviceid == HAL_HW_PCI_8192_DEVICE_ID ||
++		deviceid == HAL_HW_PCI_0044_DEVICE_ID ||
++		deviceid == HAL_HW_PCI_0047_DEVICE_ID ||
++		deviceid == HAL_HW_PCI_8192SE_DEVICE_ID ||
++		deviceid == HAL_HW_PCI_8174_DEVICE_ID ||
++		deviceid == HAL_HW_PCI_8173_DEVICE_ID ||
++		deviceid == HAL_HW_PCI_8172_DEVICE_ID ||
++		deviceid == HAL_HW_PCI_8171_DEVICE_ID)
++	{
++		// 8192e and and 8192se may have the same device ID 8192. However, their Revision
++		// ID is different
++		// Added for 92DE. We deferentiate it from SVID,SDID.
++		if( pdev->subsystem_vendor == 0x10EC && pdev->subsystem_device == 0xE020){
++			padapter->HardwareType = HARDWARE_TYPE_RTL8192DE;
++			DBG_871X("Adapter(8192DE) is found - VendorID/DeviceID/RID=%X/%X/%X\n", venderid, deviceid, revisionid);
++		}else{
++			switch (revisionid) {
++				case HAL_HW_PCI_REVISION_ID_8192PCIE:
++					DBG_871X("Adapter(8192 PCI-E) is found - vendorid/deviceid=%x/%x\n", venderid, deviceid);
++					padapter->HardwareType = HARDWARE_TYPE_RTL8192E;
++					break;
++				case HAL_HW_PCI_REVISION_ID_8192SE:
++					DBG_871X("Adapter(8192SE) is found - vendorid/deviceid=%x/%x\n", venderid, deviceid);
++					padapter->HardwareType = HARDWARE_TYPE_RTL8192SE;
++					break;
++				default:
++					DBG_871X("Err: Unknown device - vendorid/deviceid=%x/%x\n", venderid, deviceid);
++					padapter->HardwareType = HARDWARE_TYPE_RTL8192SE;
++					break;
++			}
++		}
++	}
++	else if(deviceid==HAL_HW_PCI_8723E_DEVICE_ID )
++	{//RTL8723E may have the same device ID with RTL8192CET
++		padapter->HardwareType = HARDWARE_TYPE_RTL8723AE;
++		DBG_871X("Adapter(8723 PCI-E) is found - VendorID/DeviceID=%x/%x\n", venderid, deviceid);
++	}
++	else if (deviceid == HAL_HW_PCI_8192CET_DEVICE_ID ||
++		deviceid == HAL_HW_PCI_8192CE_DEVICE_ID ||
++		deviceid == HAL_HW_PCI_8191CE_DEVICE_ID ||
++		deviceid == HAL_HW_PCI_8188CE_DEVICE_ID)
++	{
++		DBG_871X("Adapter(8192C PCI-E) is found - vendorid/deviceid=%x/%x\n", venderid, deviceid);
++		padapter->HardwareType = HARDWARE_TYPE_RTL8192CE;
++	}
++	else if (deviceid == HAL_HW_PCI_8192DE_DEVICE_ID ||
++		deviceid == HAL_HW_PCI_002B_DEVICE_ID ){
++		padapter->HardwareType = HARDWARE_TYPE_RTL8192DE;
++		DBG_871X("Adapter(8192DE) is found - VendorID/DeviceID/RID=%X/%X/%X\n", venderid, deviceid, revisionid);
++	}
++	else
++	{
++		DBG_871X("Err: Unknown device - vendorid/deviceid=%x/%x\n", venderid, deviceid);
++		//padapter->HardwareType = HAL_DEFAULT_HARDWARE_TYPE;
++	}
++
++
++	padapter->chip_type = NULL_CHIP_TYPE;
++
++	//TODO:
++#ifdef CONFIG_RTL8192C
++	padapter->chip_type = RTL8188C_8192C;
++	padapter->HardwareType = HARDWARE_TYPE_RTL8192CE;
++#endif
++#ifdef CONFIG_RTL8192D
++	pdvobjpriv->InterfaceNumber = revisionid;
++
++	padapter->chip_type = RTL8192D;
++	padapter->HardwareType = HARDWARE_TYPE_RTL8192DE;
++#endif
++
++}
++
++static void pci_intf_start(_adapter *padapter)
++{
++
++	RT_TRACE(_module_hci_intfs_c_,_drv_err_,("+pci_intf_start\n"));
++	DBG_871X("+pci_intf_start\n");
++
++#ifdef CONFIG_PCILED_BLINK
++	rtw_led_control(padapter, LED_CTL_NO_LINK);
++#endif
++	//Enable hw interrupt
++	rtw_hal_enable_interrupt(padapter);
++
++	RT_TRACE(_module_hci_intfs_c_,_drv_err_,("-pci_intf_start\n"));
++	DBG_871X("-pci_intf_start\n");
++}
++
++static void pci_intf_stop(_adapter *padapter)
++{
++
++	RT_TRACE(_module_hci_intfs_c_,_drv_err_,("+pci_intf_stop\n"));
++
++	//Disable hw interrupt
++	if(padapter->bSurpriseRemoved == _FALSE)
++	{
++		//device still exists, so driver can do i/o operation
++		rtw_hal_disable_interrupt(padapter);
++		tasklet_disable(&(padapter->recvpriv.recv_tasklet));
++		tasklet_disable(&(padapter->recvpriv.irq_prepare_beacon_tasklet));
++		tasklet_disable(&(padapter->xmitpriv.xmit_tasklet));
++
++#ifdef CONFIG_CONCURRENT_MODE
++		/*	This function only be called at driver removing. disable buddy_adapter too
++			don't disable interrupt of buddy_adapter because it is same as primary.
++		*/
++		if (padapter->pbuddy_adapter){
++			tasklet_disable(&(padapter->pbuddy_adapter->recvpriv.recv_tasklet));
++			tasklet_disable(&(padapter->pbuddy_adapter->recvpriv.irq_prepare_beacon_tasklet));
++			tasklet_disable(&(padapter->pbuddy_adapter->xmitpriv.xmit_tasklet));
++		}
++#endif
++		RT_TRACE(_module_hci_intfs_c_,_drv_err_,("pci_intf_stop: SurpriseRemoved==_FALSE\n"));
++	}
++	else
++	{
++		// Clear irq_enabled to prevent handle interrupt function.
++		adapter_to_dvobj(padapter)->irq_enabled = 0;
++	}
++
++	RT_TRACE(_module_hci_intfs_c_,_drv_err_,("-pci_intf_stop\n"));
++
++}
++
++
++static void rtw_dev_unload(_adapter *padapter)
++{
++	struct net_device *pnetdev= (struct net_device*)padapter->pnetdev;
++
++	RT_TRACE(_module_hci_intfs_c_,_drv_err_,("+rtw_dev_unload\n"));
++
++	if(padapter->bup == _TRUE)
++	{
++		DBG_871X("+rtw_dev_unload\n");
++
++		padapter->bDriverStopped = _TRUE;
++		#ifdef CONFIG_XMIT_ACK
++		if (padapter->xmitpriv.ack_tx)
++			rtw_ack_tx_done(&padapter->xmitpriv, RTW_SCTX_DONE_DRV_STOP);
++		#endif
++
++		//s3.
++		if(padapter->intf_stop)
++		{
++			padapter->intf_stop(padapter);
++		}
++
++		//s4.
++		rtw_stop_drv_threads(padapter);
++
++
++		//s5.
++		if(padapter->bSurpriseRemoved == _FALSE)
++		{
++			DBG_871X("r871x_dev_unload()->rtl871x_hal_deinit()\n");
++			rtw_hal_deinit(padapter);
++
++			padapter->bSurpriseRemoved = _TRUE;
++		}
++
++		padapter->bup = _FALSE;
++
++	}
++	else
++	{
++		RT_TRACE(_module_hci_intfs_c_,_drv_err_,("r871x_dev_unload():padapter->bup == _FALSE\n" ));
++	}
++
++	DBG_871X("-rtw_dev_unload\n");
++
++	RT_TRACE(_module_hci_intfs_c_,_drv_err_,("-rtw_dev_unload\n"));
++
++}
++
++static void disable_ht_for_spec_devid(const struct pci_device_id *pdid)
++{
++#ifdef CONFIG_80211N_HT
++	u16 vid, pid;
++	u32 flags;
++	int i;
++	int num = sizeof(specific_device_id_tbl)/sizeof(struct specific_device_id);
++
++	for(i=0; i<num; i++)
++	{
++		vid = specific_device_id_tbl[i].idVendor;
++		pid = specific_device_id_tbl[i].idProduct;
++		flags = specific_device_id_tbl[i].flags;
++
++		if((pdid->vendor==vid) && (pdid->device==pid) && (flags&SPEC_DEV_ID_DISABLE_HT))
++		{
++			 rtw_ht_enable = 0;
++			 rtw_cbw40_enable = 0;
++			 rtw_ampdu_enable = 0;
++		}
++
++	}
++#endif
++}
++
++#ifdef CONFIG_PM
++static int rtw_suspend(struct pci_dev *pdev, pm_message_t state)
++{
++	_func_enter_;
++
++
++	_func_exit_;
++	return 0;
++}
++
++static int rtw_resume(struct pci_dev *pdev)
++{
++	_func_enter_;
++
++
++	_func_exit_;
++
++	return 0;
++}
++#endif
++
++_adapter *rtw_pci_if1_init(struct dvobj_priv * dvobj, struct pci_dev *pdev,
++	const struct pci_device_id *pdid)
++{
++	_adapter *padapter = NULL;
++	struct net_device *pnetdev = NULL;
++	int status = _FAIL;
++
++	if ((padapter = (_adapter *)rtw_zvmalloc(sizeof(*padapter))) == NULL) {
++		goto exit;
++	}
++	padapter->dvobj = dvobj;
++	dvobj->if1 = padapter;
++
++	padapter->bDriverStopped=_TRUE;
++
++	dvobj->padapters[dvobj->iface_nums++] = padapter;
++	padapter->iface_id = IFACE_ID0;
++
++#if defined(CONFIG_CONCURRENT_MODE) || defined(CONFIG_DUALMAC_CONCURRENT)
++	//set adapter_type/iface type for primary padapter
++	padapter->isprimary = _TRUE;
++	padapter->adapter_type = PRIMARY_ADAPTER;
++	#ifndef CONFIG_HWPORT_SWAP
++	padapter->iface_type = IFACE_PORT0;
++	#else
++	padapter->iface_type = IFACE_PORT1;
++	#endif
++#endif
++
++	//step 1-1., decide the chip_type via vid/pid
++	padapter->interface_type = RTW_PCIE;
++	decide_chip_type_by_pci_device_id(padapter, pdev);
++
++	if((pnetdev = rtw_init_netdev(padapter)) == NULL) {
++		goto free_adapter;
++	}
++	if (dvobj->bdma64)
++		pnetdev->features |= NETIF_F_HIGHDMA;
++	pnetdev->irq = pdev->irq;
++	SET_NETDEV_DEV(pnetdev, dvobj_to_dev(dvobj));
++	padapter = rtw_netdev_priv(pnetdev);
++
++	//step 2. hook HalFunc, allocate HalData
++	if (padapter->chip_type == RTL8188C_8192C) {
++		#ifdef CONFIG_RTL8192C
++		rtl8192ce_set_hal_ops(padapter);
++		#endif
++	} else if (padapter->chip_type == RTL8192D) {
++		#ifdef CONFIG_RTL8192D
++		rtl8192de_set_hal_ops(padapter);
++		#endif
++	} else {
++		DBG_871X("Detect NULL_CHIP_TYPE\n");
++		goto free_hal_data;
++	}
++
++	//step 3.	initialize the dvobj_priv
++	padapter->intf_start=&pci_intf_start;
++	padapter->intf_stop=&pci_intf_stop;
++
++
++	//.2
++	if ((rtw_init_io_priv(padapter, pci_set_intf_ops)) == _FAIL) {
++		RT_TRACE(_module_hci_intfs_c_,_drv_err_,(" \n Can't init io_reqs\n"));
++		goto free_hal_data;
++	}
++
++	//.3
++	rtw_hal_read_chip_version(padapter);
++
++	//.4
++	rtw_hal_chip_configure(padapter);
++
++	//step 4. read efuse/eeprom data and get mac_addr
++	rtw_hal_read_chip_info(padapter);
++
++	if (rtw_handle_dualmac(padapter, 1) != _SUCCESS)
++		goto free_hal_data;
++
++#ifdef CONFIG_IOCTL_CFG80211
++	if(rtw_wdev_alloc(padapter, dvobj_to_dev(dvobj)) != 0) {
++		goto handle_dualmac;
++	}
++#endif
++
++	//step 5.
++	if (rtw_init_drv_sw(padapter) == _FAIL) {
++		RT_TRACE(_module_hci_intfs_c_,_drv_err_,("Initialize driver software resource Failed!\n"));
++		goto free_wdev;
++	}
++
++	status = rtw_hal_inirp_init(padapter);
++	if(status ==_FAIL){
++		RT_TRACE(_module_hci_intfs_c_,_drv_err_,("Initialize PCI desc ring Failed!\n"));
++		goto free_drv_sw;
++	}
++
++	rtw_macaddr_cfg(padapter->eeprompriv.mac_addr);
++	rtw_init_wifidirect_addrs(padapter, padapter->eeprompriv.mac_addr, padapter->eeprompriv.mac_addr);
++
++
++	rtw_hal_disable_interrupt(padapter);
++
++	//step 6. Init pci related configuration
++	rtw_pci_initialize_adapter_common(padapter);
++
++	DBG_871X("bDriverStopped:%d, bSurpriseRemoved:%d, bup:%d, hw_init_completed:%d\n"
++		,padapter->bDriverStopped
++		,padapter->bSurpriseRemoved
++		,padapter->bup
++		,padapter->hw_init_completed
++	);
++
++	status = _SUCCESS;
++
++inirp_deinit:
++	if (status != _SUCCESS)
++		rtw_hal_inirp_deinit(padapter);
++free_drv_sw:
++	if (status != _SUCCESS)
++		rtw_free_drv_sw(padapter);
++free_wdev:
++	if (status != _SUCCESS) {
++		#ifdef CONFIG_IOCTL_CFG80211
++		rtw_wdev_unregister(padapter->rtw_wdev);
++		rtw_wdev_free(padapter->rtw_wdev);
++		#endif
++	}
++handle_dualmac:
++	if (status != _SUCCESS)
++		rtw_handle_dualmac(padapter, 0);
++free_hal_data:
++	if (status != _SUCCESS && padapter->HalData)
++		rtw_mfree(padapter->HalData, sizeof(*(padapter->HalData)));
++free_adapter:
++	if (status != _SUCCESS) {
++		if (pnetdev)
++			rtw_free_netdev(pnetdev);
++		else if (padapter)
++			rtw_vmfree((u8*)padapter, sizeof(*padapter));
++		padapter = NULL;
++	}
++exit:
++	return padapter;
++}
++
++static void rtw_pci_if1_deinit(_adapter *if1)
++{
++	struct net_device *pnetdev = if1->pnetdev;
++	struct mlme_priv *pmlmepriv= &if1->mlmepriv;
++
++	//	padapter->intf_stop(padapter);
++
++	if(check_fwstate(pmlmepriv, _FW_LINKED))
++		rtw_disassoc_cmd(if1, 0, _FALSE);
++
++#ifdef CONFIG_AP_MODE
++	free_mlme_ap_info(if1);
++	#ifdef CONFIG_HOSTAPD_MLME
++	hostapd_mode_unload(if1);
++	#endif
++#endif
++
++	rtw_cancel_all_timer(if1);
++#ifdef CONFIG_WOWLAN
++	if1->pwrctrlpriv.wowlan_mode=_FALSE;
++#endif //CONFIG_WOWLAN
++	rtw_dev_unload(if1);
++
++	DBG_871X("%s, hw_init_completed=%d\n", __func__, if1->hw_init_completed);
++
++	//s6.
++	rtw_handle_dualmac(if1, 0);
++
++#ifdef CONFIG_IOCTL_CFG80211
++	if (if1->rtw_wdev)
++		rtw_wdev_free(if1->rtw_wdev);
++#endif //CONFIG_IOCTL_CFG80211
++
++	rtw_hal_inirp_deinit(if1);
++	rtw_free_drv_sw(if1);
++
++	if(pnetdev)
++		rtw_free_netdev(pnetdev);
++
++#ifdef CONFIG_PLATFORM_RTD2880B
++	DBG_871X("wlan link down\n");
++	rtd2885_wlan_netlink_sendMsg("linkdown", "8712");
++#endif
++}
++
++/*
++ * drv_init() - a device potentially for us
++ *
++ * notes: drv_init() is called when the bus driver has located a card for us to support.
++ *        We accept the new device by returning 0.
++*/
++static int rtw_drv_init(struct pci_dev *pdev, const struct pci_device_id *did)
++{
++	int i, err = -ENODEV;
++
++	int status;
++	_adapter *if1 = NULL, *if2 = NULL;
++	struct dvobj_priv *dvobj;
++
++	RT_TRACE(_module_hci_intfs_c_, _drv_err_, ("+rtw_drv_init\n"));
++
++	//step 0.
++	disable_ht_for_spec_devid(did);
++
++	/* Initialize dvobj_priv */
++	if ((dvobj = pci_dvobj_init(pdev)) == NULL) {
++		RT_TRACE(_module_hci_intfs_c_, _drv_err_, ("initialize device object priv Failed!\n"));
++		goto exit;
++	}
++
++	/* Initialize if1 */
++	if ((if1 = rtw_pci_if1_init(dvobj, pdev, did)) == NULL) {
++		DBG_871X("rtw_pci_if1_init Failed!\n");
++		goto free_dvobj;
++	}
++
++	/* Initialize if2 */
++#ifdef CONFIG_CONCURRENT_MODE
++	if((if2 = rtw_drv_if2_init(if1, pci_set_intf_ops)) == NULL) {
++		goto free_if1;
++	}
++#endif
++
++#ifdef CONFIG_GLOBAL_UI_PID
++	if (ui_pid[1]!=0) {
++		DBG_871X("ui_pid[1]:%d\n",ui_pid[1]);
++		rtw_signal_process(ui_pid[1], SIGUSR2);
++	}
++#endif
++
++	//dev_alloc_name && register_netdev
++	if((status = rtw_drv_register_netdev(if1)) != _SUCCESS) {
++		goto free_if1;
++	}
++
++#ifdef CONFIG_HOSTAPD_MLME
++	hostapd_mode_init(if1);
++#endif
++
++#ifdef CONFIG_PLATFORM_RTD2880B
++	DBG_871X("wlan link up\n");
++	rtd2885_wlan_netlink_sendMsg("linkup", "8712");
++#endif
++
++#ifdef RTK_DMP_PLATFORM
++	rtw_proc_init_one(if1->pnetdev);
++#endif
++
++
++	/* alloc irq */
++	if (pci_alloc_irq(dvobj) != _SUCCESS)
++		goto free_if2;
++
++	RT_TRACE(_module_hci_intfs_c_,_drv_err_,("-871x_drv - drv_init, success!\n"));
++	//DBG_871X("-871x_drv - drv_init, success!\n");
++
++	status = _SUCCESS;
++
++free_if2:
++	if(status != _SUCCESS && if2) {
++		#ifdef CONFIG_CONCURRENT_MODE
++		rtw_drv_if2_stop(if2);
++		rtw_drv_if2_free(if2);
++		#endif
++	}
++free_if1:
++	if (status != _SUCCESS && if1) {
++		rtw_pci_if1_deinit(if1);
++	}
++free_dvobj:
++	if (status != _SUCCESS)
++		pci_dvobj_deinit(pdev);
++exit:
++	return status == _SUCCESS?0:-ENODEV;
++}
++
++/*
++ * dev_remove() - our device is being removed
++*/
++//rmmod module & unplug(SurpriseRemoved) will call r871xu_dev_remove() => how to recognize both
++static void rtw_dev_remove(struct pci_dev *pdev)
++{
++	struct dvobj_priv *pdvobjpriv = pci_get_drvdata(pdev);
++	_adapter *padapter = pdvobjpriv->if1;
++	struct net_device *pnetdev = padapter->pnetdev;
++
++_func_exit_;
++
++	DBG_871X("+rtw_dev_remove\n");
++
++	pdvobjpriv->processing_dev_remove = _TRUE;
++
++	if (unlikely(!padapter)) {
++		return;
++	}
++
++	rtw_unregister_netdevs(pdvobjpriv);
++
++	#if 0
++#ifdef RTK_DMP_PLATFORM
++	padapter->bSurpriseRemoved = _FALSE;	// always trate as device exists
++											// this will let the driver to disable it's interrupt
++#else
++	if(pci_drvpriv.drv_registered == _TRUE)
++	{
++		//DBG_871X("r871xu_dev_remove():padapter->bSurpriseRemoved == _TRUE\n");
++		padapter->bSurpriseRemoved = _TRUE;
++	}
++	/*else
++	{
++		//DBG_871X("r871xu_dev_remove():module removed\n");
++		padapter->hw_init_completed = _FALSE;
++	}*/
++#endif
++	#endif
++
++#if defined(CONFIG_HAS_EARLYSUSPEND) || defined(CONFIG_ANDROID_POWER)
++	rtw_unregister_early_suspend(&padapter->pwrctrlpriv);
++#endif
++
++	rtw_pm_set_ips(padapter, IPS_NONE);
++	rtw_pm_set_lps(padapter, PS_MODE_ACTIVE);
++
++	LeaveAllPowerSaveMode(padapter);
++
++	rtw_hal_disable_interrupt(padapter);
++
++#ifdef CONFIG_CONCURRENT_MODE
++	rtw_drv_if2_stop(pdvobjpriv->if2);
++#endif //CONFIG_CONCURRENT_MODE
++
++	rtw_pci_if1_deinit(padapter);
++
++#ifdef CONFIG_CONCURRENT_MODE
++	rtw_drv_if2_free(pdvobjpriv->if2);
++#endif
++
++	pci_dvobj_deinit(pdev);
++
++	DBG_871X("-r871xu_dev_remove, done\n");
++
++_func_exit_;
++	return;
++}
++
++
++static int __init rtw_drv_entry(void)
++{
++	int ret = 0;
++
++	RT_TRACE(_module_hci_intfs_c_,_drv_err_,("+rtw_drv_entry\n"));
++	DBG_871X("rtw driver version=%s\n", DRIVERVERSION);
++	DBG_871X("Build at: %s %s\n", __DATE__, __TIME__);
++	pci_drvpriv.drv_registered = _TRUE;
++
++	rtw_suspend_lock_init();
++
++	ret = pci_register_driver(&pci_drvpriv.rtw_pci_drv);
++	if (ret) {
++		RT_TRACE(_module_hci_intfs_c_, _drv_err_, (": No device found\n"));
++	}
++
++	return ret;
++}
++
++static void __exit rtw_drv_halt(void)
++{
++	RT_TRACE(_module_hci_intfs_c_,_drv_err_,("+rtw_drv_halt\n"));
++	DBG_871X("+rtw_drv_halt\n");
++
++	pci_drvpriv.drv_registered = _FALSE;
++
++	pci_unregister_driver(&pci_drvpriv.rtw_pci_drv);
++
++	rtw_suspend_lock_uninit();
++	DBG_871X("-rtw_drv_halt\n");
++
++	rtw_mstat_dump();
++}
++
++
++module_init(rtw_drv_entry);
++module_exit(rtw_drv_halt);
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/os_dep/linux/pci_ops_linux.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/os_dep/linux/pci_ops_linux.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/os_dep/linux/pci_ops_linux.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/os_dep/linux/pci_ops_linux.c	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,24 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *******************************************************************************/
++#define _PCI_OPS_LINUX_C_
++
++#include <drv_types.h>
++
++
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/os_dep/linux/recv_linux.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/os_dep/linux/recv_linux.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/os_dep/linux/recv_linux.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/os_dep/linux/recv_linux.c	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,448 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _RECV_OSDEP_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++
++#include <wifi.h>
++#include <recv_osdep.h>
++
++#include <osdep_intf.h>
++#include <ethernet.h>
++
++#ifdef CONFIG_USB_HCI
++#include <usb_ops.h>
++#endif
++
++//init os related resource in struct recv_priv
++int rtw_os_recv_resource_init(struct recv_priv *precvpriv, _adapter *padapter)
++{
++	int	res=_SUCCESS;
++
++	return res;
++}
++
++//alloc os related resource in union recv_frame
++int rtw_os_recv_resource_alloc(_adapter *padapter, union recv_frame *precvframe)
++{
++	int	res=_SUCCESS;
++	
++	precvframe->u.hdr.pkt_newalloc = precvframe->u.hdr.pkt = NULL;
++
++	return res;
++
++}
++
++//free os related resource in union recv_frame
++void rtw_os_recv_resource_free(struct recv_priv *precvpriv)
++{
++
++}
++
++
++//alloc os related resource in struct recv_buf
++int rtw_os_recvbuf_resource_alloc(_adapter *padapter, struct recv_buf *precvbuf)
++{
++	int res=_SUCCESS;
++
++#ifdef CONFIG_USB_HCI
++	struct dvobj_priv	*pdvobjpriv = adapter_to_dvobj(padapter);
++	struct usb_device	*pusbd = pdvobjpriv->pusbdev;
++
++	precvbuf->irp_pending = _FALSE;
++	precvbuf->purb = usb_alloc_urb(0, GFP_KERNEL);
++	if(precvbuf->purb == NULL){
++		res = _FAIL;
++	}
++
++	precvbuf->pskb = NULL;
++
++	precvbuf->reuse = _FALSE;
++
++	precvbuf->pallocated_buf  = precvbuf->pbuf = NULL;
++
++	precvbuf->pdata = precvbuf->phead = precvbuf->ptail = precvbuf->pend = NULL;
++
++	precvbuf->transfer_len = 0;
++
++	precvbuf->len = 0;
++
++	#ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX
++	precvbuf->pallocated_buf = rtw_usb_buffer_alloc(pusbd, (size_t)precvbuf->alloc_sz, &precvbuf->dma_transfer_addr);
++	precvbuf->pbuf = precvbuf->pallocated_buf;
++	if(precvbuf->pallocated_buf == NULL)
++		return _FAIL;
++	#endif //CONFIG_USE_USB_BUFFER_ALLOC_RX
++	
++#endif //CONFIG_USB_HCI
++
++	return res;
++}
++
++//free os related resource in struct recv_buf
++int rtw_os_recvbuf_resource_free(_adapter *padapter, struct recv_buf *precvbuf)
++{
++	int ret = _SUCCESS;
++
++#ifdef CONFIG_USB_HCI
++
++#ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX
++
++	struct dvobj_priv	*pdvobjpriv = adapter_to_dvobj(padapter);
++	struct usb_device	*pusbd = pdvobjpriv->pusbdev;
++
++	rtw_usb_buffer_free(pusbd, (size_t)precvbuf->alloc_sz, precvbuf->pallocated_buf, precvbuf->dma_transfer_addr);
++	precvbuf->pallocated_buf =  NULL;
++	precvbuf->dma_transfer_addr = 0;
++
++#endif //CONFIG_USE_USB_BUFFER_ALLOC_RX
++
++	if(precvbuf->purb)
++	{
++		//usb_kill_urb(precvbuf->purb);
++		usb_free_urb(precvbuf->purb);
++	}
++
++#endif //CONFIG_USB_HCI
++
++
++	if(precvbuf->pskb)
++		rtw_skb_free(precvbuf->pskb);
++
++
++	return ret;
++
++}
++
++void rtw_handle_tkip_mic_err(_adapter *padapter,u8 bgroup)
++{
++#ifdef CONFIG_IOCTL_CFG80211
++	enum nl80211_key_type key_type;
++#endif
++	union iwreq_data wrqu;
++	struct iw_michaelmicfailure    ev;
++	struct mlme_priv*              pmlmepriv  = &padapter->mlmepriv;
++	struct security_priv	*psecuritypriv = &padapter->securitypriv;	
++	u32 cur_time = 0;
++
++	if( psecuritypriv->last_mic_err_time == 0 )
++	{
++		psecuritypriv->last_mic_err_time = rtw_get_current_time();
++	}
++	else
++	{
++		cur_time = rtw_get_current_time();
++
++		if( cur_time - psecuritypriv->last_mic_err_time < 60*HZ )
++		{
++			psecuritypriv->btkip_countermeasure = _TRUE;
++			psecuritypriv->last_mic_err_time = 0;
++			psecuritypriv->btkip_countermeasure_time = cur_time;
++		}
++		else
++		{
++			psecuritypriv->last_mic_err_time = rtw_get_current_time();
++		}
++	}
++
++#ifdef CONFIG_IOCTL_CFG80211
++	if ( bgroup )
++	{
++		key_type |= NL80211_KEYTYPE_GROUP;
++	}
++	else
++	{
++		key_type |= NL80211_KEYTYPE_PAIRWISE;
++	}
++
++	cfg80211_michael_mic_failure(padapter->pnetdev, (u8 *)&pmlmepriv->assoc_bssid[ 0 ], key_type, -1,
++		NULL, GFP_ATOMIC);
++#endif
++
++	_rtw_memset( &ev, 0x00, sizeof( ev ) );
++	if ( bgroup )
++	{
++	    ev.flags |= IW_MICFAILURE_GROUP;
++	}
++	else
++	{
++	    ev.flags |= IW_MICFAILURE_PAIRWISE;
++	}
++
++	ev.src_addr.sa_family = ARPHRD_ETHER;
++	_rtw_memcpy( ev.src_addr.sa_data, &pmlmepriv->assoc_bssid[ 0 ], ETH_ALEN );
++
++	_rtw_memset( &wrqu, 0x00, sizeof( wrqu ) );
++	wrqu.data.length = sizeof( ev );
++
++	wireless_send_event( padapter->pnetdev, IWEVMICHAELMICFAILURE, &wrqu, (char*) &ev );
++}
++
++void rtw_hostapd_mlme_rx(_adapter *padapter, union recv_frame *precv_frame)
++{
++#ifdef CONFIG_HOSTAPD_MLME
++	_pkt *skb;
++	struct hostapd_priv *phostapdpriv  = padapter->phostapdpriv;
++	struct net_device *pmgnt_netdev = phostapdpriv->pmgnt_netdev;
++
++	RT_TRACE(_module_recv_osdep_c_, _drv_info_, ("+rtw_hostapd_mlme_rx\n"));
++
++	skb = precv_frame->u.hdr.pkt;
++
++	if (skb == NULL)
++		return;
++
++	skb->data = precv_frame->u.hdr.rx_data;
++	skb->tail = precv_frame->u.hdr.rx_tail;
++	skb->len = precv_frame->u.hdr.len;
++
++	//pskb_copy = rtw_skb_copy(skb);
++//	if(skb == NULL) goto _exit;
++
++	skb->dev = pmgnt_netdev;
++	skb->ip_summed = CHECKSUM_NONE;
++	skb->pkt_type = PACKET_OTHERHOST;
++	//skb->protocol = __constant_htons(0x0019); /*ETH_P_80211_RAW*/
++	skb->protocol = __constant_htons(0x0003); /*ETH_P_80211_RAW*/
++
++	//DBG_871X("(1)data=0x%x, head=0x%x, tail=0x%x, mac_header=0x%x, len=%d\n", skb->data, skb->head, skb->tail, skb->mac_header, skb->len);
++
++	//skb->mac.raw = skb->data;
++	skb_reset_mac_header(skb);
++
++       //skb_pull(skb, 24);
++       _rtw_memset(skb->cb, 0, sizeof(skb->cb));
++
++	rtw_netif_rx(pmgnt_netdev, skb);
++
++	precv_frame->u.hdr.pkt = NULL; // set pointer to NULL before rtw_free_recvframe() if call rtw_netif_rx()
++#endif
++}
++
++int rtw_recv_indicatepkt(_adapter *padapter, union recv_frame *precv_frame)
++{
++	struct recv_priv *precvpriv;
++	_queue	*pfree_recv_queue;
++	_pkt *skb;
++	struct mlme_priv*pmlmepriv = &padapter->mlmepriv;
++#ifdef CONFIG_TCP_CSUM_OFFLOAD_RX
++	struct rx_pkt_attrib *pattrib = &precv_frame->u.hdr.attrib;
++#endif
++
++#ifdef CONFIG_BR_EXT
++	void *br_port = NULL;
++#endif
++
++_func_enter_;
++
++	precvpriv = &(padapter->recvpriv);
++	pfree_recv_queue = &(precvpriv->free_recv_queue);
++
++#ifdef CONFIG_DRVEXT_MODULE
++	if (drvext_rx_handler(padapter, precv_frame->u.hdr.rx_data, precv_frame->u.hdr.len) == _SUCCESS)
++	{
++		goto _recv_indicatepkt_drop;
++	}
++#endif
++
++	skb = precv_frame->u.hdr.pkt;
++	if(skb == NULL)
++	{
++		RT_TRACE(_module_recv_osdep_c_,_drv_err_,("rtw_recv_indicatepkt():skb==NULL something wrong!!!!\n"));
++		goto _recv_indicatepkt_drop;
++	}
++
++	RT_TRACE(_module_recv_osdep_c_,_drv_info_,("rtw_recv_indicatepkt():skb != NULL !!!\n"));		
++	RT_TRACE(_module_recv_osdep_c_,_drv_info_,("rtw_recv_indicatepkt():precv_frame->u.hdr.rx_head=%p  precv_frame->hdr.rx_data=%p\n", precv_frame->u.hdr.rx_head, precv_frame->u.hdr.rx_data));
++	RT_TRACE(_module_recv_osdep_c_,_drv_info_,("precv_frame->hdr.rx_tail=%p precv_frame->u.hdr.rx_end=%p precv_frame->hdr.len=%d \n", precv_frame->u.hdr.rx_tail, precv_frame->u.hdr.rx_end, precv_frame->u.hdr.len));
++
++	skb->data = precv_frame->u.hdr.rx_data;
++
++	skb_set_tail_pointer(skb, precv_frame->u.hdr.len);
++
++	skb->len = precv_frame->u.hdr.len;
++
++	RT_TRACE(_module_recv_osdep_c_,_drv_info_,("\n skb->head=%p skb->data=%p skb->tail=%p skb->end=%p skb->len=%d\n", skb->head, skb->data, skb->tail, skb->end, skb->len));
++
++	if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE)
++	{
++	 	_pkt *pskb2=NULL;
++	 	struct sta_info *psta = NULL;
++	 	struct sta_priv *pstapriv = &padapter->stapriv;
++		struct rx_pkt_attrib *pattrib = &precv_frame->u.hdr.attrib;
++		int bmcast = IS_MCAST(pattrib->dst);
++
++		//DBG_871X("bmcast=%d\n", bmcast);
++
++		if(_rtw_memcmp(pattrib->dst, myid(&padapter->eeprompriv), ETH_ALEN)==_FALSE)
++		{
++			//DBG_871X("not ap psta=%p, addr=%pM\n", psta, pattrib->dst);
++
++			if(bmcast)
++			{
++				psta = rtw_get_bcmc_stainfo(padapter);
++				pskb2 = rtw_skb_clone(skb);
++			} else {
++				psta = rtw_get_stainfo(pstapriv, pattrib->dst);
++			}
++
++			if(psta)
++			{
++				struct net_device *pnetdev= (struct net_device*)padapter->pnetdev;			
++
++				//DBG_871X("directly forwarding to the rtw_xmit_entry\n");
++
++				//skb->ip_summed = CHECKSUM_NONE;
++				skb->dev = pnetdev;			
++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35))
++				skb_set_queue_mapping(skb, rtw_recv_select_queue(skb));
++#endif //LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35)
++			
++				_rtw_xmit_entry(skb, pnetdev);
++			
++				if(bmcast)
++					skb = pskb2;
++				else
++					goto _recv_indicatepkt_end;
++			}
++
++
++		}
++		else// to APself
++		{
++			//DBG_871X("to APSelf\n");
++		}
++	}
++	
++
++#ifdef CONFIG_BR_EXT
++
++#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35))
++	br_port = padapter->pnetdev->br_port;
++#else   // (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35))
++	rcu_read_lock();
++	br_port = rcu_dereference(padapter->pnetdev->rx_handler_data);
++	rcu_read_unlock();
++#endif  // (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 35))
++
++	if( br_port	&& (check_fwstate(pmlmepriv, WIFI_STATION_STATE|WIFI_ADHOC_STATE) == _TRUE) )	 	
++	{
++		int nat25_handle_frame(_adapter *priv, struct sk_buff *skb);
++		if (nat25_handle_frame(padapter, skb) == -1) {
++			//priv->ext_stats.rx_data_drops++;
++			//DEBUG_ERR("RX DROP: nat25_handle_frame fail!\n");
++			//return FAIL;
++#if 1			
++			// bypass this frame to upper layer!!
++#else
++			goto _recv_indicatepkt_drop;
++#endif
++		}	
++	}
++
++#endif	// CONFIG_BR_EXT
++
++
++#ifdef CONFIG_TCP_CSUM_OFFLOAD_RX
++	if ( (pattrib->tcpchk_valid == 1) && (pattrib->tcp_chkrpt == 1) ) {
++		skb->ip_summed = CHECKSUM_UNNECESSARY;
++		//DBG_871X("CHECKSUM_UNNECESSARY \n");
++	} else {
++		skb->ip_summed = CHECKSUM_NONE;
++		//DBG_871X("CHECKSUM_NONE(%d, %d) \n", pattrib->tcpchk_valid, pattrib->tcp_chkrpt);
++	}
++#else /* !CONFIG_TCP_CSUM_OFFLOAD_RX */
++
++	skb->ip_summed = CHECKSUM_NONE;
++
++#endif
++
++	skb->dev = padapter->pnetdev;
++	skb->protocol = eth_type_trans(skb, padapter->pnetdev);
++
++	rtw_netif_rx(padapter->pnetdev, skb);
++
++_recv_indicatepkt_end:
++
++	precv_frame->u.hdr.pkt = NULL; // pointers to NULL before rtw_free_recvframe()
++
++	rtw_free_recvframe(precv_frame, pfree_recv_queue);
++
++	RT_TRACE(_module_recv_osdep_c_,_drv_info_,("\n rtw_recv_indicatepkt :after rtw_netif_rx!!!!\n"));
++
++_func_exit_;
++
++        return _SUCCESS;
++
++_recv_indicatepkt_drop:
++
++	 //enqueue back to free_recv_queue
++	 if(precv_frame)
++		 rtw_free_recvframe(precv_frame, pfree_recv_queue);
++
++	 return _FAIL;
++
++_func_exit_;
++
++}
++
++void rtw_os_read_port(_adapter *padapter, struct recv_buf *precvbuf)
++{
++	struct recv_priv *precvpriv = &padapter->recvpriv;
++
++#ifdef CONFIG_USB_HCI
++
++	precvbuf->ref_cnt--;
++
++	//free skb in recv_buf
++	rtw_skb_free(precvbuf->pskb);
++
++	precvbuf->pskb = NULL;
++	precvbuf->reuse = _FALSE;
++
++	if(precvbuf->irp_pending == _FALSE)
++	{
++		rtw_read_port(padapter, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf);
++	}
++
++
++#endif
++#ifdef CONFIG_SDIO_HCI
++		precvbuf->pskb = NULL;
++#endif
++
++}
++void _rtw_reordering_ctrl_timeout_handler (void *FunctionContext);
++void _rtw_reordering_ctrl_timeout_handler (void *FunctionContext)
++{
++	struct recv_reorder_ctrl *preorder_ctrl = (struct recv_reorder_ctrl *)FunctionContext;
++	rtw_reordering_ctrl_timeout_handler(preorder_ctrl);
++}
++
++void rtw_init_recv_timer(struct recv_reorder_ctrl *preorder_ctrl)
++{
++	_adapter *padapter = preorder_ctrl->padapter;
++
++	_init_timer(&(preorder_ctrl->reordering_ctrl_timer), padapter->pnetdev, _rtw_reordering_ctrl_timeout_handler, preorder_ctrl);
++
++}
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/os_dep/linux/rtw_android.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/os_dep/linux/rtw_android.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/os_dep/linux/rtw_android.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/os_dep/linux/rtw_android.c	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,839 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++
++#include <linux/module.h>
++#include <linux/netdevice.h>
++
++#include <rtw_android.h>
++#include <osdep_service.h>
++#include <rtw_debug.h>
++#include <ioctl_cfg80211.h>
++#include <rtw_ioctl_set.h>
++
++#if defined(RTW_ENABLE_WIFI_CONTROL_FUNC)
++#include <linux/platform_device.h>
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35))
++#include <linux/wlan_plat.h>
++#else
++#include <linux/wifi_tiwlan.h>
++#endif
++#endif /* defined(RTW_ENABLE_WIFI_CONTROL_FUNC) */
++
++const char *android_wifi_cmd_str[ANDROID_WIFI_CMD_MAX] = {
++	"START",
++	"STOP",
++	"SCAN-ACTIVE",
++	"SCAN-PASSIVE",
++	"RSSI",
++	"LINKSPEED",
++	"RXFILTER-START",
++	"RXFILTER-STOP",
++	"RXFILTER-ADD",
++	"RXFILTER-REMOVE",
++	"BTCOEXSCAN-START",
++	"BTCOEXSCAN-STOP",
++	"BTCOEXMODE",
++	"SETSUSPENDOPT",
++	"P2P_DEV_ADDR",
++	"SETFWPATH",
++	"SETBAND",
++	"GETBAND",
++	"COUNTRY",
++	"P2P_SET_NOA",
++	"P2P_GET_NOA",
++	"P2P_SET_PS",
++	"SET_AP_WPS_P2P_IE",
++#ifdef PNO_SUPPORT
++	"PNOSSIDCLR",
++	"PNOSETUP ",
++	"PNOFORCE",
++	"PNODEBUG",
++#endif
++
++	"MACADDR",
++
++	"BLOCK",
++	"WFD-ENABLE",
++	"WFD-DISABLE",
++	"WFD-SET-TCPPORT",
++	"WFD-SET-MAXTPUT",
++	"WFD-SET-DEVTYPE",	
++};
++
++#ifdef PNO_SUPPORT
++#define PNO_TLV_PREFIX			'S'
++#define PNO_TLV_VERSION			'1'
++#define PNO_TLV_SUBVERSION 		'2'
++#define PNO_TLV_RESERVED		'0'
++#define PNO_TLV_TYPE_SSID_IE		'S'
++#define PNO_TLV_TYPE_TIME		'T'
++#define PNO_TLV_FREQ_REPEAT		'R'
++#define PNO_TLV_FREQ_EXPO_MAX		'M'
++
++typedef struct cmd_tlv {
++	char prefix;
++	char version;
++	char subver;
++	char reserved;
++} cmd_tlv_t;
++#endif /* PNO_SUPPORT */
++
++typedef struct android_wifi_priv_cmd {
++
++#ifdef CONFIG_COMPAT
++	compat_uptr_t buf;
++#else
++	char *buf;
++#endif
++
++	int used_len;
++	int total_len;
++} android_wifi_priv_cmd;
++
++/**
++ * Local (static) functions and variables
++ */
++
++/* Initialize g_wifi_on to 1 so dhd_bus_start will be called for the first
++ * time (only) in dhd_open, subsequential wifi on will be handled by
++ * wl_android_wifi_on
++ */
++static int g_wifi_on = _TRUE;
++
++
++#ifdef PNO_SUPPORT
++static int wl_android_set_pno_setup(struct net_device *dev, char *command, int total_len)
++{
++	wlc_ssid_t ssids_local[MAX_PFN_LIST_COUNT];
++	int res = -1;
++	int nssid = 0;
++	cmd_tlv_t *cmd_tlv_temp;
++	char *str_ptr;
++	int tlv_size_left;
++	int pno_time = 0;
++	int pno_repeat = 0;
++	int pno_freq_expo_max = 0;
++
++#ifdef PNO_SET_DEBUG
++	int i;
++	char pno_in_example[] = {
++		'P', 'N', 'O', 'S', 'E', 'T', 'U', 'P', ' ',
++		'S', '1', '2', '0',
++		'S',
++		0x05,
++		'd', 'l', 'i', 'n', 'k',
++		'S',
++		0x04,
++		'G', 'O', 'O', 'G',
++		'T',
++		'0', 'B',
++		'R',
++		'2',
++		'M',
++		'2',
++		0x00
++		};
++#endif /* PNO_SET_DEBUG */
++
++	DHD_INFO(("%s: command=%s, len=%d\n", __FUNCTION__, command, total_len));
++
++	if (total_len < (strlen(CMD_PNOSETUP_SET) + sizeof(cmd_tlv_t))) {
++		DBG_871X("%s argument=%d less min size\n", __FUNCTION__, total_len);
++		goto exit_proc;
++	}
++
++#ifdef PNO_SET_DEBUG
++	memcpy(command, pno_in_example, sizeof(pno_in_example));
++	for (i = 0; i < sizeof(pno_in_example); i++)
++		printf("%02X ", command[i]);
++	printf("\n");
++	total_len = sizeof(pno_in_example);
++#endif
++
++	str_ptr = command + strlen(CMD_PNOSETUP_SET);
++	tlv_size_left = total_len - strlen(CMD_PNOSETUP_SET);
++
++	cmd_tlv_temp = (cmd_tlv_t *)str_ptr;
++	memset(ssids_local, 0, sizeof(ssids_local));
++
++	if ((cmd_tlv_temp->prefix == PNO_TLV_PREFIX) &&
++		(cmd_tlv_temp->version == PNO_TLV_VERSION) &&
++		(cmd_tlv_temp->subver == PNO_TLV_SUBVERSION)) {
++
++		str_ptr += sizeof(cmd_tlv_t);
++		tlv_size_left -= sizeof(cmd_tlv_t);
++
++		if ((nssid = wl_iw_parse_ssid_list_tlv(&str_ptr, ssids_local,
++			MAX_PFN_LIST_COUNT, &tlv_size_left)) <= 0) {
++			DBG_871X("SSID is not presented or corrupted ret=%d\n", nssid);
++			goto exit_proc;
++		} else {
++			if ((str_ptr[0] != PNO_TLV_TYPE_TIME) || (tlv_size_left <= 1)) {
++				DBG_871X("%s scan duration corrupted field size %d\n",
++					__FUNCTION__, tlv_size_left);
++				goto exit_proc;
++			}
++			str_ptr++;
++			pno_time = simple_strtoul(str_ptr, &str_ptr, 16);
++			DHD_INFO(("%s: pno_time=%d\n", __FUNCTION__, pno_time));
++
++			if (str_ptr[0] != 0) {
++				if ((str_ptr[0] != PNO_TLV_FREQ_REPEAT)) {
++					DBG_871X("%s pno repeat : corrupted field\n",
++						__FUNCTION__);
++					goto exit_proc;
++				}
++				str_ptr++;
++				pno_repeat = simple_strtoul(str_ptr, &str_ptr, 16);
++				DHD_INFO(("%s :got pno_repeat=%d\n", __FUNCTION__, pno_repeat));
++				if (str_ptr[0] != PNO_TLV_FREQ_EXPO_MAX) {
++					DBG_871X("%s FREQ_EXPO_MAX corrupted field size\n",
++						__FUNCTION__);
++					goto exit_proc;
++				}
++				str_ptr++;
++				pno_freq_expo_max = simple_strtoul(str_ptr, &str_ptr, 16);
++				DHD_INFO(("%s: pno_freq_expo_max=%d\n",
++					__FUNCTION__, pno_freq_expo_max));
++			}
++		}
++	} else {
++		DBG_871X("%s get wrong TLV command\n", __FUNCTION__);
++		goto exit_proc;
++	}
++
++	res = dhd_dev_pno_set(dev, ssids_local, nssid, pno_time, pno_repeat, pno_freq_expo_max);
++
++exit_proc:
++	return res;
++}
++#endif /* PNO_SUPPORT */
++
++int rtw_android_cmdstr_to_num(char *cmdstr)
++{
++	int cmd_num;
++	for(cmd_num=0 ; cmd_num<ANDROID_WIFI_CMD_MAX; cmd_num++)
++		if(0 == strnicmp(cmdstr , android_wifi_cmd_str[cmd_num], strlen(android_wifi_cmd_str[cmd_num])) )
++			break;
++		
++	return cmd_num;
++}
++
++int rtw_android_get_rssi(struct net_device *net, char *command, int total_len)
++{
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(net);
++	struct	mlme_priv	*pmlmepriv = &(padapter->mlmepriv);	
++	struct	wlan_network	*pcur_network = &pmlmepriv->cur_network;
++	int bytes_written = 0;
++
++	if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE) {	
++		bytes_written += snprintf(&command[bytes_written], total_len, "%s rssi %d", 
++			pcur_network->network.Ssid.Ssid, padapter->recvpriv.rssi);
++	}
++
++	return bytes_written;
++}
++
++int rtw_android_get_link_speed(struct net_device *net, char *command, int total_len)
++{
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(net);
++	struct	mlme_priv	*pmlmepriv = &(padapter->mlmepriv);	
++	struct	wlan_network	*pcur_network = &pmlmepriv->cur_network;
++	int bytes_written = 0;
++	u16 link_speed = 0;
++
++	link_speed = rtw_get_cur_max_rate(padapter)/10;
++	bytes_written = snprintf(command, total_len, "LinkSpeed %d", link_speed);
++
++	return bytes_written;
++}
++
++int rtw_android_get_macaddr(struct net_device *net, char *command, int total_len)
++{
++	_adapter *adapter = (_adapter *)rtw_netdev_priv(net);
++	int bytes_written = 0;
++	
++	bytes_written = snprintf(command, total_len, "Macaddr = "MAC_FMT, MAC_ARG(net->dev_addr));
++	return bytes_written;
++}
++
++int rtw_android_set_country(struct net_device *net, char *command, int total_len)
++{
++	_adapter *adapter = (_adapter *)rtw_netdev_priv(net);
++	char *country_code = command + strlen(android_wifi_cmd_str[ANDROID_WIFI_CMD_COUNTRY]) + 1;
++	int ret = _FAIL;
++	
++	ret = rtw_set_country(adapter, country_code);
++
++	return (ret==_SUCCESS)?0:-1;
++}
++
++int rtw_android_get_p2p_dev_addr(struct net_device *net, char *command, int total_len)
++{
++	int bytes_written = 0;
++
++	//We use the same address as our HW MAC address
++	_rtw_memcpy(command, net->dev_addr, ETH_ALEN);
++	
++	bytes_written = ETH_ALEN;
++	return bytes_written;
++}
++
++int rtw_android_set_block(struct net_device *net, char *command, int total_len)
++{
++	_adapter *adapter = (_adapter *)rtw_netdev_priv(net);
++	char *block_value = command + strlen(android_wifi_cmd_str[ANDROID_WIFI_CMD_BLOCK]) + 1;
++
++	#ifdef CONFIG_IOCTL_CFG80211
++	wdev_to_priv(adapter->rtw_wdev)->block = (*block_value=='0')?_FALSE:_TRUE;
++	#endif
++	
++	return 0;
++}
++
++int rtw_android_setband(struct net_device *net, char *command, int total_len)
++{
++	_adapter *adapter = (_adapter *)rtw_netdev_priv(net);
++	char *arg = command + strlen(android_wifi_cmd_str[ANDROID_WIFI_CMD_SETBAND]) + 1;
++	u32 band = GHZ_MAX;
++	int ret = _FAIL;
++
++	sscanf(arg, "%u", &band);
++	ret = rtw_set_band(adapter, band);
++
++	return (ret==_SUCCESS)?0:-1;
++}
++
++int rtw_android_getband(struct net_device *net, char *command, int total_len)
++{
++	_adapter *adapter = (_adapter *)rtw_netdev_priv(net);
++	int bytes_written = 0;
++
++	bytes_written = snprintf(command, total_len, "%u", adapter->setband);
++
++	return bytes_written;
++}
++
++int get_int_from_command( char* pcmd )
++{
++	int i = 0;
++
++	for( i = 0; i < strlen( pcmd ); i++ )
++	{
++		if ( pcmd[ i ] == '=' )
++		{
++			//	Skip the '=' and space characters.
++			i += 2;
++			break;
++		}
++	}
++	return ( rtw_atoi( pcmd + i ) );
++}
++
++int rtw_android_priv_cmd(struct net_device *net, struct ifreq *ifr, int cmd)
++{
++	int ret = 0;
++	char *command = NULL;
++	int cmd_num;
++	int bytes_written = 0;
++	android_wifi_priv_cmd priv_cmd;
++
++	rtw_lock_suspend();
++
++	if (!ifr->ifr_data) {
++		ret = -EINVAL;
++		goto exit;
++	}
++	if (copy_from_user(&priv_cmd, ifr->ifr_data, sizeof(android_wifi_priv_cmd))) {
++		ret = -EFAULT;
++		goto exit;
++	}
++
++	command = rtw_zmalloc(priv_cmd.total_len);
++	if (!command)
++	{
++		DBG_871X("%s: failed to allocate memory\n", __FUNCTION__);
++		ret = -ENOMEM;
++		goto exit;
++	}
++
++	if (!access_ok(VERIFY_READ, priv_cmd.buf, priv_cmd.total_len)){
++	 	DBG_871X("%s: failed to access memory\n", __FUNCTION__);
++		ret = -EFAULT;
++		goto exit;
++	 }
++	if (copy_from_user(command, (void *)priv_cmd.buf, priv_cmd.total_len)) {
++		ret = -EFAULT;
++		goto exit;
++	}
++
++	DBG_871X("%s: Android private cmd \"%s\" on %s\n"
++		, __FUNCTION__, command, ifr->ifr_name);
++
++	cmd_num = rtw_android_cmdstr_to_num(command);
++	
++	switch(cmd_num) {
++	case ANDROID_WIFI_CMD_START:
++		//bytes_written = wl_android_wifi_on(net);
++		goto response;
++	case ANDROID_WIFI_CMD_SETFWPATH:
++		goto response;
++	}
++
++	if (!g_wifi_on) {
++		DBG_871X("%s: Ignore private cmd \"%s\" - iface %s is down\n"
++			,__FUNCTION__, command, ifr->ifr_name);
++		ret = 0;
++		goto exit;
++	}
++
++	switch(cmd_num) {
++
++	case ANDROID_WIFI_CMD_STOP:
++		//bytes_written = wl_android_wifi_off(net);
++		break;
++		
++	case ANDROID_WIFI_CMD_SCAN_ACTIVE:
++		//rtw_set_scan_mode((_adapter *)rtw_netdev_priv(net), SCAN_ACTIVE);
++#ifdef CONFIG_PLATFORM_MSTAR
++#ifdef CONFIG_IOCTL_CFG80211
++		(wdev_to_priv(net->ieee80211_ptr))->bandroid_scan = _TRUE;	
++#endif //CONFIG_IOCTL_CFG80211
++#endif //CONFIG_PLATFORM_MSTAR
++		break;
++	case ANDROID_WIFI_CMD_SCAN_PASSIVE:
++		//rtw_set_scan_mode((_adapter *)rtw_netdev_priv(net), SCAN_PASSIVE);
++		break;
++		
++	case ANDROID_WIFI_CMD_RSSI:
++		bytes_written = rtw_android_get_rssi(net, command, priv_cmd.total_len);
++		break;
++	case ANDROID_WIFI_CMD_LINKSPEED:
++		bytes_written = rtw_android_get_link_speed(net, command, priv_cmd.total_len);
++		break;
++
++	case ANDROID_WIFI_CMD_MACADDR:
++		bytes_written = rtw_android_get_macaddr(net, command, priv_cmd.total_len);
++		break;
++		
++	case ANDROID_WIFI_CMD_BLOCK:
++		bytes_written = rtw_android_set_block(net, command, priv_cmd.total_len);
++		break;
++		
++	case ANDROID_WIFI_CMD_RXFILTER_START:
++		//bytes_written = net_os_set_packet_filter(net, 1);
++		break;
++	case ANDROID_WIFI_CMD_RXFILTER_STOP:
++		//bytes_written = net_os_set_packet_filter(net, 0);
++		break;
++	case ANDROID_WIFI_CMD_RXFILTER_ADD:
++		//int filter_num = *(command + strlen(CMD_RXFILTER_ADD) + 1) - '0';
++		//bytes_written = net_os_rxfilter_add_remove(net, TRUE, filter_num);
++		break;
++	case ANDROID_WIFI_CMD_RXFILTER_REMOVE:
++		//int filter_num = *(command + strlen(CMD_RXFILTER_REMOVE) + 1) - '0';
++		//bytes_written = net_os_rxfilter_add_remove(net, FALSE, filter_num);
++		break;
++		
++	case ANDROID_WIFI_CMD_BTCOEXSCAN_START:
++		/* TBD: BTCOEXSCAN-START */
++		break;
++	case ANDROID_WIFI_CMD_BTCOEXSCAN_STOP:
++		/* TBD: BTCOEXSCAN-STOP */
++		break;
++	case ANDROID_WIFI_CMD_BTCOEXMODE:
++		#if 0
++		uint mode = *(command + strlen(CMD_BTCOEXMODE) + 1) - '0';
++		if (mode == 1)
++			net_os_set_packet_filter(net, 0); /* DHCP starts */
++		else
++			net_os_set_packet_filter(net, 1); /* DHCP ends */
++#ifdef WL_CFG80211
++		bytes_written = wl_cfg80211_set_btcoex_dhcp(net, command);
++#endif
++		#endif
++		break;
++		
++	case ANDROID_WIFI_CMD_SETSUSPENDOPT:
++		//bytes_written = wl_android_set_suspendopt(net, command, priv_cmd.total_len);
++		break;
++		
++	case ANDROID_WIFI_CMD_SETBAND:
++		bytes_written = rtw_android_setband(net, command, priv_cmd.total_len);
++		break;
++
++	case ANDROID_WIFI_CMD_GETBAND:
++		bytes_written = rtw_android_getband(net, command, priv_cmd.total_len);
++		break;
++		
++	case ANDROID_WIFI_CMD_COUNTRY:
++		bytes_written = rtw_android_set_country(net, command, priv_cmd.total_len);
++		break;
++		
++#ifdef PNO_SUPPORT
++	case ANDROID_WIFI_CMD_PNOSSIDCLR_SET:
++		//bytes_written = dhd_dev_pno_reset(net);
++		break;
++	case ANDROID_WIFI_CMD_PNOSETUP_SET:
++		//bytes_written = wl_android_set_pno_setup(net, command, priv_cmd.total_len);
++		break;
++	case ANDROID_WIFI_CMD_PNOENABLE_SET:
++		//uint pfn_enabled = *(command + strlen(CMD_PNOENABLE_SET) + 1) - '0';
++		//bytes_written = dhd_dev_pno_enable(net, pfn_enabled);
++		break;
++#endif
++
++	case ANDROID_WIFI_CMD_P2P_DEV_ADDR:
++		bytes_written = rtw_android_get_p2p_dev_addr(net, command, priv_cmd.total_len);
++		break;
++	case ANDROID_WIFI_CMD_P2P_SET_NOA:
++		//int skip = strlen(CMD_P2P_SET_NOA) + 1;
++		//bytes_written = wl_cfg80211_set_p2p_noa(net, command + skip, priv_cmd.total_len - skip);
++		break;
++	case ANDROID_WIFI_CMD_P2P_GET_NOA:
++		//bytes_written = wl_cfg80211_get_p2p_noa(net, command, priv_cmd.total_len);
++		break;
++	case ANDROID_WIFI_CMD_P2P_SET_PS:
++		//int skip = strlen(CMD_P2P_SET_PS) + 1;
++		//bytes_written = wl_cfg80211_set_p2p_ps(net, command + skip, priv_cmd.total_len - skip);
++		break;
++		
++#ifdef CONFIG_IOCTL_CFG80211
++	case ANDROID_WIFI_CMD_SET_AP_WPS_P2P_IE:
++	{
++		int skip = strlen(android_wifi_cmd_str[ANDROID_WIFI_CMD_SET_AP_WPS_P2P_IE]) + 3;
++		bytes_written = rtw_cfg80211_set_mgnt_wpsp2pie(net, command + skip, priv_cmd.total_len - skip, *(command + skip - 2) - '0');
++		break;
++	}
++#endif //CONFIG_IOCTL_CFG80211
++
++#ifdef CONFIG_WFD
++	case ANDROID_WIFI_CMD_WFD_ENABLE:
++	{
++		//	Commented by Albert 2012/07/24
++		//	We can enable the WFD function by using the following command:
++		//	wpa_cli driver wfd-enable
++		
++		struct wifi_display_info		*pwfd_info;
++		_adapter*	padapter = ( _adapter * ) rtw_netdev_priv(net);
++	
++		pwfd_info = &padapter->wfd_info;
++		if( padapter->wdinfo.driver_interface == DRIVER_CFG80211 )
++			pwfd_info->wfd_enable = _TRUE;
++		break;
++	}
++
++	case ANDROID_WIFI_CMD_WFD_DISABLE:
++	{
++		//	Commented by Albert 2012/07/24
++		//	We can disable the WFD function by using the following command:
++		//	wpa_cli driver wfd-disable
++				
++		struct wifi_display_info		*pwfd_info;
++		_adapter*	padapter = ( _adapter * ) rtw_netdev_priv(net);
++	
++		pwfd_info = &padapter->wfd_info;
++		if( padapter->wdinfo.driver_interface == DRIVER_CFG80211 )
++			pwfd_info->wfd_enable = _FALSE;
++		break;
++	}
++	case ANDROID_WIFI_CMD_WFD_SET_TCPPORT:
++	{
++		//	Commented by Albert 2012/07/24
++		//	We can set the tcp port number by using the following command:
++		//	wpa_cli driver wfd-set-tcpport = 554
++		
++		struct wifi_display_info		*pwfd_info;
++		_adapter*	padapter = ( _adapter * ) rtw_netdev_priv(net);
++	
++		pwfd_info = &padapter->wfd_info;
++		if( padapter->wdinfo.driver_interface == DRIVER_CFG80211 )
++			pwfd_info->rtsp_ctrlport = ( u16 ) get_int_from_command( priv_cmd.buf );
++		break;
++	}
++	case ANDROID_WIFI_CMD_WFD_SET_MAX_TPUT:
++	{
++		
++		
++		break;
++	}
++	case ANDROID_WIFI_CMD_WFD_SET_DEVTYPE:
++	{
++		//	Commented by Albert 2012/08/28
++		//	Specify the WFD device type ( WFD source/primary sink )
++		
++		struct wifi_display_info		*pwfd_info;
++		_adapter*	padapter = ( _adapter * ) rtw_netdev_priv(net);
++	
++		pwfd_info = &padapter->wfd_info;
++		if( padapter->wdinfo.driver_interface == DRIVER_CFG80211 )
++		{
++			pwfd_info->wfd_device_type = ( u8 ) get_int_from_command( priv_cmd.buf );
++
++			pwfd_info->wfd_device_type &= WFD_DEVINFO_DUAL;
++		}
++		break;
++	}
++#endif
++	default:
++		DBG_871X("Unknown PRIVATE command %s - ignored\n", command);
++		snprintf(command, 3, "OK");
++		bytes_written = strlen("OK");
++	}
++
++response:
++	if (bytes_written >= 0) {
++		if ((bytes_written == 0) && (priv_cmd.total_len > 0))
++			command[0] = '\0';
++		if (bytes_written >= priv_cmd.total_len) {
++			DBG_871X("%s: bytes_written = %d\n", __FUNCTION__, bytes_written);
++			bytes_written = priv_cmd.total_len;
++		} else {
++			bytes_written++;
++		}
++		priv_cmd.used_len = bytes_written;
++		if (copy_to_user((void *)priv_cmd.buf, command, bytes_written)) {
++			DBG_871X("%s: failed to copy data to user buffer\n", __FUNCTION__);
++			ret = -EFAULT;
++		}
++	}
++	else {
++		ret = bytes_written;
++	}
++
++exit:
++	rtw_unlock_suspend();
++	if (command) {
++		rtw_mfree(command, priv_cmd.total_len);
++	}
++
++	return ret;
++}
++
++
++/**
++ * Functions for Android WiFi card detection
++ */
++#if defined(RTW_ENABLE_WIFI_CONTROL_FUNC)
++
++static int g_wifidev_registered = 0;
++static struct semaphore wifi_control_sem;
++static struct wifi_platform_data *wifi_control_data = NULL;
++static struct resource *wifi_irqres = NULL;
++
++static int wifi_add_dev(void);
++static void wifi_del_dev(void);
++
++int rtw_android_wifictrl_func_add(void)
++{
++	int ret = 0;
++	sema_init(&wifi_control_sem, 0);
++
++	ret = wifi_add_dev();
++	if (ret) {
++		DBG_871X("%s: platform_driver_register failed\n", __FUNCTION__);
++		return ret;
++	}
++	g_wifidev_registered = 1;
++
++	/* Waiting callback after platform_driver_register is done or exit with error */
++	if (down_timeout(&wifi_control_sem,  msecs_to_jiffies(1000)) != 0) {
++		ret = -EINVAL;
++		DBG_871X("%s: platform_driver_register timeout\n", __FUNCTION__);
++	}
++
++	return ret;
++}
++
++void rtw_android_wifictrl_func_del(void)
++{
++	if (g_wifidev_registered)
++	{
++		wifi_del_dev();
++		g_wifidev_registered = 0;
++	}
++}
++
++void *wl_android_prealloc(int section, unsigned long size)
++{
++	void *alloc_ptr = NULL;
++	if (wifi_control_data && wifi_control_data->mem_prealloc) {
++		alloc_ptr = wifi_control_data->mem_prealloc(section, size);
++		if (alloc_ptr) {
++			DBG_871X("success alloc section %d\n", section);
++			if (size != 0L)
++				memset(alloc_ptr, 0, size);
++			return alloc_ptr;
++		}
++	}
++
++	DBG_871X("can't alloc section %d\n", section);
++	return NULL;
++}
++
++int wifi_get_irq_number(unsigned long *irq_flags_ptr)
++{
++	if (wifi_irqres) {
++		*irq_flags_ptr = wifi_irqres->flags & IRQF_TRIGGER_MASK;
++		return (int)wifi_irqres->start;
++	}
++#ifdef CUSTOM_OOB_GPIO_NUM
++	return CUSTOM_OOB_GPIO_NUM;
++#else
++	return -1;
++#endif
++}
++
++int wifi_set_power(int on, unsigned long msec)
++{
++	DBG_871X("%s = %d\n", __FUNCTION__, on);
++	if (wifi_control_data && wifi_control_data->set_power) {
++		wifi_control_data->set_power(on);
++	}
++	if (msec)
++		msleep(msec);
++	return 0;
++}
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35))
++int wifi_get_mac_addr(unsigned char *buf)
++{
++	DBG_871X("%s\n", __FUNCTION__);
++	if (!buf)
++		return -EINVAL;
++	if (wifi_control_data && wifi_control_data->get_mac_addr) {
++		return wifi_control_data->get_mac_addr(buf);
++	}
++	return -EOPNOTSUPP;
++}
++#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35)) */
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 39)) || defined(COMPAT_KERNEL_RELEASE)
++void *wifi_get_country_code(char *ccode)
++{
++	DBG_871X("%s\n", __FUNCTION__);
++	if (!ccode)
++		return NULL;
++	if (wifi_control_data && wifi_control_data->get_country_code) {
++		return wifi_control_data->get_country_code(ccode);
++	}
++	return NULL;
++}
++#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 39)) */
++
++static int wifi_set_carddetect(int on)
++{
++	DBG_871X("%s = %d\n", __FUNCTION__, on);
++	if (wifi_control_data && wifi_control_data->set_carddetect) {
++		wifi_control_data->set_carddetect(on);
++	}
++	return 0;
++}
++
++static int wifi_probe(struct platform_device *pdev)
++{
++	struct wifi_platform_data *wifi_ctrl =
++		(struct wifi_platform_data *)(pdev->dev.platform_data);
++
++	DBG_871X("## %s\n", __FUNCTION__);
++	wifi_irqres = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "bcmdhd_wlan_irq");
++	if (wifi_irqres == NULL)
++		wifi_irqres = platform_get_resource_byname(pdev,
++			IORESOURCE_IRQ, "bcm4329_wlan_irq");
++	wifi_control_data = wifi_ctrl;
++
++	wifi_set_power(1, 0);	/* Power On */
++	wifi_set_carddetect(1);	/* CardDetect (0->1) */
++
++	up(&wifi_control_sem);
++	return 0;
++}
++
++static int wifi_remove(struct platform_device *pdev)
++{
++	struct wifi_platform_data *wifi_ctrl =
++		(struct wifi_platform_data *)(pdev->dev.platform_data);
++
++	DBG_871X("## %s\n", __FUNCTION__);
++	wifi_control_data = wifi_ctrl;
++
++	wifi_set_power(0, 0);	/* Power Off */
++	wifi_set_carddetect(0);	/* CardDetect (1->0) */
++
++	up(&wifi_control_sem);
++	return 0;
++}
++
++static int wifi_suspend(struct platform_device *pdev, pm_message_t state)
++{
++	DBG_871X("##> %s\n", __FUNCTION__);
++#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 39)) && defined(OOB_INTR_ONLY)
++	bcmsdh_oob_intr_set(0);
++#endif
++	return 0;
++}
++
++static int wifi_resume(struct platform_device *pdev)
++{
++	DBG_871X("##> %s\n", __FUNCTION__);
++#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 39)) && defined(OOB_INTR_ONLY)
++	if (dhd_os_check_if_up(bcmsdh_get_drvdata()))
++		bcmsdh_oob_intr_set(1);
++#endif
++	return 0;
++}
++
++/* temporarily use these two */
++static struct platform_driver wifi_device = {
++	.probe          = wifi_probe,
++	.remove         = wifi_remove,
++	.suspend        = wifi_suspend,
++	.resume         = wifi_resume,
++	.driver         = {
++	.name   = "bcmdhd_wlan",
++	}
++};
++
++static struct platform_driver wifi_device_legacy = {
++	.probe          = wifi_probe,
++	.remove         = wifi_remove,
++	.suspend        = wifi_suspend,
++	.resume         = wifi_resume,
++	.driver         = {
++	.name   = "bcm4329_wlan",
++	}
++};
++
++static int wifi_add_dev(void)
++{
++	DBG_871X("## Calling platform_driver_register\n");
++	platform_driver_register(&wifi_device);
++	platform_driver_register(&wifi_device_legacy);
++	return 0;
++}
++
++static void wifi_del_dev(void)
++{
++	DBG_871X("## Unregister platform_driver_register\n");
++	platform_driver_unregister(&wifi_device);
++	platform_driver_unregister(&wifi_device_legacy);
++}
++#endif /* defined(RTW_ENABLE_WIFI_CONTROL_FUNC) */
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/os_dep/linux/usb_intf.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/os_dep/linux/usb_intf.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/os_dep/linux/usb_intf.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/os_dep/linux/usb_intf.c	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,1656 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _HCI_INTF_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <recv_osdep.h>
++#include <xmit_osdep.h>
++#include <hal_intf.h>
++#include <rtw_version.h>
++
++#ifndef CONFIG_USB_HCI
++
++#error "CONFIG_USB_HCI shall be on!\n"
++
++#endif
++
++#include <usb_vendor_req.h>
++#include <usb_ops.h>
++#include <usb_osintf.h>
++#include <usb_hal.h>
++#ifdef CONFIG_PLATFORM_RTK_DMP
++#include <asm/io.h>
++#endif
++
++#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS)
++
++#error "Shall be Linux or Windows, but not both!\n"
++
++#endif
++
++#ifdef CONFIG_80211N_HT
++extern int rtw_ht_enable;
++extern int rtw_cbw40_enable;
++extern int rtw_ampdu_enable;//for enable tx_ampdu
++#endif
++
++#ifdef CONFIG_GLOBAL_UI_PID
++int ui_pid[3] = {0, 0, 0};
++#endif
++
++
++extern int pm_netdev_open(struct net_device *pnetdev,u8 bnormal);
++static int rtw_suspend(struct usb_interface *intf, pm_message_t message);
++static int rtw_resume(struct usb_interface *intf);
++int rtw_resume_process(_adapter *padapter);
++
++
++static int rtw_drv_init(struct usb_interface *pusb_intf,const struct usb_device_id *pdid);
++static void rtw_dev_remove(struct usb_interface *pusb_intf);
++
++#define USB_VENDER_ID_REALTEK		0x0BDA
++
++/* DID_USB_v915_20121224 */
++#define RTL8192C_USB_IDS \
++	/*=== Realtek demoboard ===*/ \
++	{USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8191)},/* Default ID */ \
++	/****** 8188CUS ********/ \
++	{USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8176)},/* 8188cu 1*1 dongole */ \
++	{USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8170)},/* 8188CE-VAU USB minCard */ \
++	{USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817E)},/* 8188CE-VAU USB minCard */ \
++	{USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817A)},/* 8188cu Slim Solo */ \
++	{USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817B)},/* 8188cu Slim Combo */ \
++	{USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817D)},/* 8188RU High-power USB Dongle */ \
++	{USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8754)},/* 8188 Combo for BC4 */ \
++	{USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817F)},/* 8188RU */ \
++	{USB_DEVICE(USB_VENDER_ID_REALTEK, 0x818A)},/* RTL8188CUS-VL */ \
++	{USB_DEVICE(USB_VENDER_ID_REALTEK, 0x018A)},/* RTL8188CTV */ \
++	{USB_DEVICE(USB_VENDER_ID_REALTEK, 0x17C0)}, /* RTK demoboard - USB-N10E */ \
++	/****** 8192CUS ********/ \
++	{USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8177)},/* 8191cu 1*2 */ \
++	{USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8178)},/* 8192cu 2*2 */ \
++	{USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817C)},/* 8192CE-VAU USB minCard */ \
++	{USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8191)},/* 8192CU 2*2 */ \
++	{USB_DEVICE(0x1058, 0x0631)},/* Alpha, 8192CU */ \
++	/*=== Customer ID ===*/	 \
++	/****** 8188CUS Dongle ********/ \
++	{USB_DEVICE(0x2019, 0xED17)},/* PCI - Edimax */ \
++	{USB_DEVICE(0x0DF6, 0x0052)},/* Sitecom - Edimax */ \
++	{USB_DEVICE(0x7392, 0x7811)},/* Edimax - Edimax */ \
++	{USB_DEVICE(0x07B8, 0x8189)},/* Abocom - Abocom */ \
++	{USB_DEVICE(0x0EB0, 0x9071)},/* NO Brand - Etop */ \
++	{USB_DEVICE(0x06F8, 0xE033)},/* Hercules - Edimax */ \
++	{USB_DEVICE(0x103C, 0x1629)},/* HP - Lite-On ,8188CUS Slim Combo */ \
++	{USB_DEVICE(0x2001, 0x3308)},/* D-Link - Alpha */ \
++	{USB_DEVICE(0x050D, 0x1102)},/* Belkin - Edimax */ \
++	{USB_DEVICE(0x2019, 0xAB2A)},/* Planex - Abocom */ \
++	{USB_DEVICE(0x20F4, 0x648B)},/* TRENDnet - Cameo */ \
++	{USB_DEVICE(0x4855, 0x0090)},/*  - Feixun */ \
++	{USB_DEVICE(0x13D3, 0x3357)},/*  - AzureWave */ \
++	{USB_DEVICE(0x0DF6, 0x005C)},/* Sitecom - Edimax */ \
++	{USB_DEVICE(0x0BDA, 0x5088)},/* Thinkware - CC&C */ \
++	{USB_DEVICE(0x4856, 0x0091)},/* NetweeN - Feixun */ \
++	{USB_DEVICE(0x0846, 0x9041)}, /* Netgear - Cameo */ \
++	{USB_DEVICE(0x2019, 0x4902)},/* Planex - Etop */ \
++	{USB_DEVICE(0x2019, 0xAB2E)},/* SW-WF02-AD15 -Abocom */ \
++	{USB_DEVICE(0x2001, 0x330B)}, /* D-LINK - T&W */ \
++	{USB_DEVICE(0xCDAB, 0x8010)}, /* - - compare */ \
++	{USB_DEVICE(0x0B05, 0x17BA)}, /* ASUS - Edimax */ \
++	{USB_DEVICE(0x0BDA, 0x1E1E)}, /* Intel - - */ \
++	{USB_DEVICE(0x04BB, 0x094c)}, /* I-O DATA - Edimax */ \
++	/****** 8188CTV ********/ \
++	{USB_DEVICE(0xCDAB, 0x8011)}, /* - - compare */ \
++	{USB_DEVICE(0x0BDA, 0x0A8A)}, /* Sony - Foxconn */ \
++	/****** 8188 RU ********/ \
++	{USB_DEVICE(0x0BDA, 0x317F)},/* Netcore,Netcore */ \
++	/****** 8188CE-VAU ********/ \
++	{USB_DEVICE(0x13D3, 0x3359)},/*  - Azwave */ \
++	{USB_DEVICE(0x13D3, 0x3358)},/*  - Azwave */ \
++	/****** 8188CUS Slim Solo********/ \
++	{USB_DEVICE(0x04F2, 0xAFF7)},/* XAVI - XAVI */ \
++	{USB_DEVICE(0x04F2, 0xAFF9)},/* XAVI - XAVI */ \
++	{USB_DEVICE(0x04F2, 0xAFFA)},/* XAVI - XAVI */ \
++	/****** 8188CUS Slim Combo ********/ \
++	{USB_DEVICE(0x04F2, 0xAFF8)},/* XAVI - XAVI */ \
++	{USB_DEVICE(0x04F2, 0xAFFB)},/* XAVI - XAVI */ \
++	{USB_DEVICE(0x04F2, 0xAFFC)},/* XAVI - XAVI */ \
++	{USB_DEVICE(0x2019, 0x1201)},/* Planex - Vencer */ \
++	/****** 8192CUS Dongle ********/ \
++	{USB_DEVICE(0x2001, 0x3307)},/* D-Link - Cameo */ \
++	{USB_DEVICE(0x2001, 0x330A)},/* D-Link - Alpha */ \
++	{USB_DEVICE(0x2001, 0x3309)},/* D-Link - Alpha */ \
++	{USB_DEVICE(0x2001, 0x330D)},/* D-Link - Alpha(?) */ \
++	{USB_DEVICE(0x0586, 0x341F)},/* Zyxel - Abocom */ \
++	{USB_DEVICE(0x7392, 0x7822)},/* Edimax - Edimax */ \
++	{USB_DEVICE(0x2019, 0xAB2B)},/* Planex - Abocom */ \
++	{USB_DEVICE(0x07B8, 0x8178)},/* Abocom - Abocom */ \
++	{USB_DEVICE(0x07AA, 0x0056)},/* ATKK - Gemtek */ \
++	{USB_DEVICE(0x4855, 0x0091)},/*  - Feixun */ \
++	{USB_DEVICE(0x050D, 0x2102)},/* Belkin - Sercomm */ \
++	{USB_DEVICE(0x050D, 0x2103)},/* Belkin - Edimax */ \
++	{USB_DEVICE(0x20F4, 0x624D)},/* TRENDnet */ \
++	{USB_DEVICE(0x0DF6, 0x0061)},/* Sitecom - Edimax */ \
++	{USB_DEVICE(0x0B05, 0x17AB)},/* ASUS - Edimax */ \
++	{USB_DEVICE(0x0846, 0x9021)},/* Netgear - Sercomm */ \
++	{USB_DEVICE(0x0846, 0xF001)}, /* Netgear - Sercomm */ \
++	{USB_DEVICE(0x0E66, 0x0019)},/* Hawking,Edimax */ \
++	{USB_DEVICE(0x0E66, 0x0020)}, /* Hawking  - Edimax */ \
++	{USB_DEVICE(0x050D, 0x1004)}, /* Belkin - Edimax */ \
++	{USB_DEVICE(0x0BDA, 0x2E2E)}, /* Intel - - */ \
++	{USB_DEVICE(0x2357, 0x0100)}, /* TP-Link - TP-Link */ \
++	{USB_DEVICE(0x06F8, 0xE035)}, /* Hercules - Edimax */ \
++	{USB_DEVICE(0x04BB, 0x0950)}, /* IO-DATA - Edimax */ \
++	{USB_DEVICE(0x0DF6, 0x0070)}, /* Sitecom - Edimax */ \
++	{USB_DEVICE(0x0789, 0x016D)}, /* LOGITEC - Edimax */ \
++	/****** 8192CE-VAU  ********/ \
++	{USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8186)},/* Intel-Xavi( Azwave) */
++
++#define RTL8192D_USB_IDS \
++	/*=== Realtek demoboard ===*/ \
++	/****** 8192DU ********/ \
++	{USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8193)},/* 8192DU-VC */ \
++	{USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8194)},/* 8192DU-VS */ \
++	{USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8111)},/* Realtek 5G dongle for WiFi Display */ \
++	{USB_DEVICE(USB_VENDER_ID_REALTEK, 0x0193)},/* 8192DE-VAU */ \
++	{USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8171)},/* 8192DU-VC */ \
++	/*=== Customer ID ===*/ \
++	/****** 8192DU-VC ********/ \
++	{USB_DEVICE(0x2019, 0xAB2C)},/* PCI - Abocm */ \
++	{USB_DEVICE(0x2019, 0x4903)},/* PCI - ETOP */ \
++	{USB_DEVICE(0x2019, 0x4904)},/* PCI - ETOP */ \
++	{USB_DEVICE(0x07B8, 0x8193)},/* Abocom - Abocom */ \
++	/****** 8192DU-VS ********/ \
++	{USB_DEVICE(0x20F4, 0x664B)}, /* TRENDnet - Cameo */ \
++	{USB_DEVICE(0x04DD, 0x954F)},  /* Sharp */ \
++	{USB_DEVICE(0x04DD, 0x96A6)},  /* Sharp */ \
++	{USB_DEVICE(0x050D, 0x110A)}, /* Belkin - Edimax */ \
++	{USB_DEVICE(0x050D, 0x1105)}, /* Belkin - Edimax */ \
++	{USB_DEVICE(0x050D, 0x120A)}, /* Belkin - Edimax */ \
++	{USB_DEVICE(0x1668, 0x8102)}, /*  -  */ \
++	{USB_DEVICE(0x0BDA, 0xE194)}, /*  - Edimax */ \
++	/****** 8192DU-WiFi Display Dongle ********/ \
++	{USB_DEVICE(0x2019, 0xAB2D)},/* Planex - Abocom ,5G dongle for WiFi Display */
++
++#ifndef CONFIG_RTL8192C
++	#undef RTL8192C_USB_IDS
++	#define RTL8192C_USB_IDS
++#endif
++#ifndef CONFIG_RTL8192D
++	#undef RTL8192D_USB_IDS
++	#define RTL8192D_USB_IDS
++#endif
++
++
++static struct usb_device_id rtw_usb_id_tbl[] ={
++	RTL8192C_USB_IDS
++	RTL8192D_USB_IDS
++	{}	/* Terminating entry */
++};
++MODULE_DEVICE_TABLE(usb, rtw_usb_id_tbl);
++
++int const rtw_usb_id_len = sizeof(rtw_usb_id_tbl) / sizeof(struct usb_device_id);
++
++static struct specific_device_id specific_device_id_tbl[] = {
++	{.idVendor=USB_VENDER_ID_REALTEK, .idProduct=0x8177, .flags=SPEC_DEV_ID_DISABLE_HT},//8188cu 1*1 dongole, (b/g mode only)
++	{.idVendor=USB_VENDER_ID_REALTEK, .idProduct=0x817E, .flags=SPEC_DEV_ID_DISABLE_HT},//8188CE-VAU USB minCard (b/g mode only)
++	{.idVendor=0x0b05, .idProduct=0x1791, .flags=SPEC_DEV_ID_DISABLE_HT},
++	{.idVendor=0x13D3, .idProduct=0x3311, .flags=SPEC_DEV_ID_DISABLE_HT},
++	{.idVendor=0x13D3, .idProduct=0x3359, .flags=SPEC_DEV_ID_DISABLE_HT},//Russian customer -Azwave (8188CE-VAU  g mode)
++#ifdef RTK_DMP_PLATFORM
++	{.idVendor=USB_VENDER_ID_REALTEK, .idProduct=0x8111, .flags=SPEC_DEV_ID_ASSIGN_IFNAME}, // Realtek 5G dongle for WiFi Display
++	{.idVendor=0x2019, .idProduct=0xAB2D, .flags=SPEC_DEV_ID_ASSIGN_IFNAME}, // PCI-Abocom 5G dongle for WiFi Display
++#endif /* RTK_DMP_PLATFORM */
++	{}
++};
++
++struct rtw_usb_drv {
++	struct usb_driver usbdrv;
++	int drv_registered;
++};
++
++static void rtw_dev_shutdown(struct device *dev)
++{
++	struct usb_interface *usb_intf = container_of(dev, struct usb_interface, dev);
++	struct dvobj_priv *dvobj = usb_get_intfdata(usb_intf);
++	_adapter *adapter = dvobj->if1;
++	int i;
++
++	DBG_871X("%s\n", __func__);
++
++	for (i = 0; i<dvobj->iface_nums; i++) {
++		adapter = dvobj->padapters[i];
++		adapter->bSurpriseRemoved = _TRUE;
++	}
++
++	ATOMIC_SET(&dvobj->continual_urb_error, MAX_CONTINUAL_URB_ERR+1);
++}
++
++#ifdef CONFIG_RTL8192C
++static struct usb_device_id rtl8192c_usb_id_tbl[] ={
++	RTL8192C_USB_IDS
++	{}	/* Terminating entry */
++};
++
++struct rtw_usb_drv rtl8192c_usb_drv = {
++	.usbdrv.name = (char*)"rtl8192cu",
++	.usbdrv.probe = rtw_drv_init,
++	.usbdrv.disconnect = rtw_dev_remove,
++	.usbdrv.id_table = rtl8192c_usb_id_tbl,
++	.usbdrv.suspend =  rtw_suspend,
++	.usbdrv.resume = rtw_resume,
++	#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 22))
++  	.usbdrv.reset_resume   = rtw_resume,
++	#endif
++	#ifdef CONFIG_AUTOSUSPEND
++	.usbdrv.supports_autosuspend = 1,
++	#endif
++
++	#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19))
++	.usbdrv.drvwrap.driver.shutdown = rtw_dev_shutdown,
++	#else
++	.usbdrv.driver.shutdown = rtw_dev_shutdown,
++	#endif
++};
++
++static struct rtw_usb_drv *usb_drv = &rtl8192c_usb_drv;
++#endif /* CONFIG_RTL8192C */
++
++#ifdef CONFIG_RTL8192D
++static struct usb_device_id rtl8192d_usb_id_tbl[] ={
++	RTL8192D_USB_IDS
++	{}	/* Terminating entry */
++};
++
++struct rtw_usb_drv rtl8192d_usb_drv = {
++	.usbdrv.name = (char*)"rtl8192du",
++	.usbdrv.probe = rtw_drv_init,
++	.usbdrv.disconnect = rtw_dev_remove,
++	.usbdrv.id_table = rtl8192d_usb_id_tbl,
++	.usbdrv.suspend =  rtw_suspend,
++	.usbdrv.resume = rtw_resume,
++	#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 22))
++  	.usbdrv.reset_resume   = rtw_resume,
++	#endif
++	#ifdef CONFIG_AUTOSUSPEND
++	.usbdrv.supports_autosuspend = 1,
++	#endif
++
++	#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19))
++	.usbdrv.drvwrap.driver.shutdown = rtw_dev_shutdown,
++	#else
++	.usbdrv.driver.shutdown = rtw_dev_shutdown,
++	#endif
++};
++static struct rtw_usb_drv *usb_drv = &rtl8192d_usb_drv;
++#endif /* CONFIG_RTL8192D */
++
++static inline int RT_usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd)
++{
++	return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN);
++}
++
++static inline int RT_usb_endpoint_dir_out(const struct usb_endpoint_descriptor *epd)
++{
++	return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
++}
++
++static inline int RT_usb_endpoint_xfer_int(const struct usb_endpoint_descriptor *epd)
++{
++	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT);
++}
++
++static inline int RT_usb_endpoint_xfer_bulk(const struct usb_endpoint_descriptor *epd)
++{
++ 	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK);
++}
++
++static inline int RT_usb_endpoint_is_bulk_in(const struct usb_endpoint_descriptor *epd)
++{
++	return (RT_usb_endpoint_xfer_bulk(epd) && RT_usb_endpoint_dir_in(epd));
++}
++
++static inline int RT_usb_endpoint_is_bulk_out(const struct usb_endpoint_descriptor *epd)
++{
++	return (RT_usb_endpoint_xfer_bulk(epd) && RT_usb_endpoint_dir_out(epd));
++}
++
++static inline int RT_usb_endpoint_is_int_in(const struct usb_endpoint_descriptor *epd)
++{
++	return (RT_usb_endpoint_xfer_int(epd) && RT_usb_endpoint_dir_in(epd));
++}
++
++static inline int RT_usb_endpoint_num(const struct usb_endpoint_descriptor *epd)
++{
++	return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
++}
++
++static u8 rtw_init_intf_priv(struct dvobj_priv *dvobj)
++{
++	u8 rst = _SUCCESS;
++
++	#ifdef CONFIG_USB_VENDOR_REQ_MUTEX
++	_rtw_mutex_init(&dvobj->usb_vendor_req_mutex);
++	#endif
++
++
++	#ifdef CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC
++	dvobj->usb_alloc_vendor_req_buf = rtw_zmalloc(MAX_USB_IO_CTL_SIZE);
++	if (dvobj->usb_alloc_vendor_req_buf == NULL) {
++		DBG_871X("alloc usb_vendor_req_buf failed... /n");
++		rst = _FAIL;
++		goto exit;
++	}
++	dvobj->usb_vendor_req_buf  =
++		(u8 *)N_BYTE_ALIGMENT((SIZE_PTR)(dvobj->usb_alloc_vendor_req_buf ), ALIGNMENT_UNIT);
++exit:
++	#endif
++
++	return rst;
++
++}
++
++static u8 rtw_deinit_intf_priv(struct dvobj_priv *dvobj)
++{
++	u8 rst = _SUCCESS;
++
++	#ifdef CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC
++	if(dvobj->usb_vendor_req_buf)
++		rtw_mfree(dvobj->usb_alloc_vendor_req_buf, MAX_USB_IO_CTL_SIZE);
++	#endif
++
++	#ifdef CONFIG_USB_VENDOR_REQ_MUTEX
++	_rtw_mutex_free(&dvobj->usb_vendor_req_mutex);
++	#endif
++
++	return rst;
++}
++
++static struct dvobj_priv *usb_dvobj_init(struct usb_interface *usb_intf)
++{
++	int	i;
++	u8	val8;
++	int	status = _FAIL;
++	struct dvobj_priv *pdvobjpriv = NULL;
++	struct usb_device				*pusbd;
++	struct usb_device_descriptor 	*pdev_desc;
++	struct usb_host_config			*phost_conf;
++	struct usb_config_descriptor		*pconf_desc;
++	struct usb_host_interface		*phost_iface;
++	struct usb_interface_descriptor	*piface_desc;
++	struct usb_host_endpoint		*phost_endp;
++	struct usb_endpoint_descriptor	*pendp_desc;
++
++_func_enter_;
++
++	if((pdvobjpriv = devobj_init()) == NULL) {
++		goto exit;
++	}
++
++	pdvobjpriv->pusbintf = usb_intf ;
++	pusbd = pdvobjpriv->pusbdev = interface_to_usbdev(usb_intf);
++	usb_set_intfdata(usb_intf, pdvobjpriv);
++
++	pdvobjpriv->RtNumInPipes = 0;
++	pdvobjpriv->RtNumOutPipes = 0;
++
++
++	pdev_desc = &pusbd->descriptor;
++#if 0
++	DBG_871X("\n8712_usb_device_descriptor:\n");
++	DBG_871X("bLength=%x\n", pdev_desc->bLength);
++	DBG_871X("bDescriptorType=%x\n", pdev_desc->bDescriptorType);
++	DBG_871X("bcdUSB=%x\n", pdev_desc->bcdUSB);
++	DBG_871X("bDeviceClass=%x\n", pdev_desc->bDeviceClass);
++	DBG_871X("bDeviceSubClass=%x\n", pdev_desc->bDeviceSubClass);
++	DBG_871X("bDeviceProtocol=%x\n", pdev_desc->bDeviceProtocol);
++	DBG_871X("bMaxPacketSize0=%x\n", pdev_desc->bMaxPacketSize0);
++	DBG_871X("idVendor=%x\n", pdev_desc->idVendor);
++	DBG_871X("idProduct=%x\n", pdev_desc->idProduct);
++	DBG_871X("bcdDevice=%x\n", pdev_desc->bcdDevice);
++	DBG_871X("iManufacturer=%x\n", pdev_desc->iManufacturer);
++	DBG_871X("iProduct=%x\n", pdev_desc->iProduct);
++	DBG_871X("iSerialNumber=%x\n", pdev_desc->iSerialNumber);
++	DBG_871X("bNumConfigurations=%x\n", pdev_desc->bNumConfigurations);
++#endif
++
++	phost_conf = pusbd->actconfig;
++	pconf_desc = &phost_conf->desc;
++
++#if 0
++	DBG_871X("\n8712_usb_configuration_descriptor:\n");
++	DBG_871X("bLength=%x\n", pconf_desc->bLength);
++	DBG_871X("bDescriptorType=%x\n", pconf_desc->bDescriptorType);
++	DBG_871X("wTotalLength=%x\n", pconf_desc->wTotalLength);
++	DBG_871X("bNumInterfaces=%x\n", pconf_desc->bNumInterfaces);
++	DBG_871X("bConfigurationValue=%x\n", pconf_desc->bConfigurationValue);
++	DBG_871X("iConfiguration=%x\n", pconf_desc->iConfiguration);
++	DBG_871X("bmAttributes=%x\n", pconf_desc->bmAttributes);
++	DBG_871X("bMaxPower=%x\n", pconf_desc->bMaxPower);
++#endif
++
++	//DBG_871X("\n/****** num of altsetting = (%d) ******/\n", usb_intf->num_altsetting);
++
++	phost_iface = &usb_intf->altsetting[0];
++	piface_desc = &phost_iface->desc;
++
++#if 0
++	DBG_871X("\n8712_usb_interface_descriptor:\n");
++	DBG_871X("bLength=%x\n", piface_desc->bLength);
++	DBG_871X("bDescriptorType=%x\n", piface_desc->bDescriptorType);
++	DBG_871X("bInterfaceNumber=%x\n", piface_desc->bInterfaceNumber);
++	DBG_871X("bAlternateSetting=%x\n", piface_desc->bAlternateSetting);
++	DBG_871X("bNumEndpoints=%x\n", piface_desc->bNumEndpoints);
++	DBG_871X("bInterfaceClass=%x\n", piface_desc->bInterfaceClass);
++	DBG_871X("bInterfaceSubClass=%x\n", piface_desc->bInterfaceSubClass);
++	DBG_871X("bInterfaceProtocol=%x\n", piface_desc->bInterfaceProtocol);
++	DBG_871X("iInterface=%x\n", piface_desc->iInterface);
++#endif
++
++	pdvobjpriv->NumInterfaces = pconf_desc->bNumInterfaces;
++	pdvobjpriv->InterfaceNumber = piface_desc->bInterfaceNumber;
++	pdvobjpriv->nr_endpoint = piface_desc->bNumEndpoints;
++
++	//DBG_871X("\ndump usb_endpoint_descriptor:\n");
++
++	for (i = 0; i < pdvobjpriv->nr_endpoint; i++)
++	{
++		phost_endp = phost_iface->endpoint + i;
++		if (phost_endp)
++		{
++			pendp_desc = &phost_endp->desc;
++
++			DBG_871X("\nusb_endpoint_descriptor(%d):\n", i);
++			DBG_871X("bLength=%x\n",pendp_desc->bLength);
++			DBG_871X("bDescriptorType=%x\n",pendp_desc->bDescriptorType);
++			DBG_871X("bEndpointAddress=%x\n",pendp_desc->bEndpointAddress);
++			//DBG_871X("bmAttributes=%x\n",pendp_desc->bmAttributes);
++			//DBG_871X("wMaxPacketSize=%x\n",pendp_desc->wMaxPacketSize);
++			DBG_871X("wMaxPacketSize=%x\n",le16_to_cpu(pendp_desc->wMaxPacketSize));
++			DBG_871X("bInterval=%x\n",pendp_desc->bInterval);
++			//DBG_871X("bRefresh=%x\n",pendp_desc->bRefresh);
++			//DBG_871X("bSynchAddress=%x\n",pendp_desc->bSynchAddress);
++
++			if (RT_usb_endpoint_is_bulk_in(pendp_desc))
++			{
++				DBG_871X("RT_usb_endpoint_is_bulk_in = %x\n", RT_usb_endpoint_num(pendp_desc));
++				pdvobjpriv->RtNumInPipes++;
++			}
++			else if (RT_usb_endpoint_is_int_in(pendp_desc))
++			{
++				DBG_871X("RT_usb_endpoint_is_int_in = %x, Interval = %x\n", RT_usb_endpoint_num(pendp_desc),pendp_desc->bInterval);
++				pdvobjpriv->RtNumInPipes++;
++			}
++			else if (RT_usb_endpoint_is_bulk_out(pendp_desc))
++			{
++				DBG_871X("RT_usb_endpoint_is_bulk_out = %x\n", RT_usb_endpoint_num(pendp_desc));
++				pdvobjpriv->RtNumOutPipes++;
++			}
++			pdvobjpriv->ep_num[i] = RT_usb_endpoint_num(pendp_desc);
++		}
++	}
++
++	DBG_871X("nr_endpoint=%d, in_num=%d, out_num=%d\n\n", pdvobjpriv->nr_endpoint, pdvobjpriv->RtNumInPipes, pdvobjpriv->RtNumOutPipes);
++
++	if (pusbd->speed == USB_SPEED_HIGH) {
++		pdvobjpriv->ishighspeed = _TRUE;
++		DBG_871X("USB_SPEED_HIGH\n");
++	} else {
++		pdvobjpriv->ishighspeed = _FALSE;
++		DBG_871X("NON USB_SPEED_HIGH\n");
++	}
++
++	if (rtw_init_intf_priv(pdvobjpriv) == _FAIL) {
++		RT_TRACE(_module_os_intfs_c_,_drv_err_,("\n Can't INIT rtw_init_intf_priv\n"));
++		goto free_dvobj;
++	}
++
++	//.3 misc
++	_rtw_init_sema(&(pdvobjpriv->usb_suspend_sema), 0);
++
++	rtw_reset_continual_urb_error(pdvobjpriv);
++
++	usb_get_dev(pusbd);
++
++	//DBG_871X("%s %d\n", __func__, ATOMIC_READ(&usb_intf->dev.kobj.kref.refcount));
++
++	status = _SUCCESS;
++
++free_dvobj:
++	if (status != _SUCCESS && pdvobjpriv) {
++		usb_set_intfdata(usb_intf, NULL);
++		devobj_deinit(pdvobjpriv);
++		pdvobjpriv = NULL;
++	}
++exit:
++_func_exit_;
++	return pdvobjpriv;
++}
++
++static void usb_dvobj_deinit(struct usb_interface *usb_intf)
++{
++	struct dvobj_priv *dvobj = usb_get_intfdata(usb_intf);
++
++_func_enter_;
++
++	usb_set_intfdata(usb_intf, NULL);
++	if (dvobj) {
++		//Modify condition for 92DU DMDP 2010.11.18, by Thomas
++		/*if ((dvobj->NumInterfaces == 1)
++			|| ((dvobj->InterfaceNumber == 1) && (dvobj->DualMacMode == _TRUE))) {
++			if (interface_to_usbdev(usb_intf)->state != USB_STATE_NOTATTACHED) {
++				//If we didn't unplug usb dongle and remove/insert modlue, driver fails on sitesurvey for the first time when device is up .
++				//Reset usb port for sitesurvey fail issue. 2009.8.13, by Thomas
++				DBG_871X("usb attached..., try to reset usb device\n");
++				usb_reset_device(interface_to_usbdev(usb_intf));
++			}
++		}*/
++		rtw_deinit_intf_priv(dvobj);
++		devobj_deinit(dvobj);
++	}
++
++	//DBG_871X("%s %d\n", __func__, ATOMIC_READ(&usb_intf->dev.kobj.kref.refcount));
++	usb_put_dev(interface_to_usbdev(usb_intf));
++
++_func_exit_;
++}
++
++static void decide_chip_type_by_usb_device_id(_adapter *padapter, const struct usb_device_id *pdid)
++{
++	padapter->chip_type = NULL_CHIP_TYPE;
++#ifdef CONFIG_RTL8192C
++	padapter->chip_type = RTL8188C_8192C;
++	padapter->HardwareType = HARDWARE_TYPE_RTL8192CU;
++	DBG_871X("CHIP TYPE: RTL8188C_8192C\n");
++#endif
++
++#ifdef CONFIG_RTL8192D
++	padapter->chip_type = RTL8192D;
++	padapter->HardwareType = HARDWARE_TYPE_RTL8192DU;
++	DBG_871X("CHIP TYPE: RTL8192D\n");
++#endif
++}
++
++static void usb_intf_start(_adapter *padapter)
++{
++	RT_TRACE(_module_hci_intfs_c_,_drv_err_,("+usb_intf_start\n"));
++	rtw_hal_inirp_init(padapter);
++	RT_TRACE(_module_hci_intfs_c_,_drv_err_,("-usb_intf_start\n"));
++}
++
++static void usb_intf_stop(_adapter *padapter)
++{
++
++	RT_TRACE(_module_hci_intfs_c_,_drv_err_,("+usb_intf_stop\n"));
++
++	//disabel_hw_interrupt
++	if(padapter->bSurpriseRemoved == _FALSE)
++	{
++		//device still exists, so driver can do i/o operation
++		//TODO:
++		RT_TRACE(_module_hci_intfs_c_,_drv_err_,("SurpriseRemoved==_FALSE\n"));
++	}
++
++	//cancel in irp
++	rtw_hal_inirp_deinit(padapter);
++
++	//cancel out irp
++	rtw_write_port_cancel(padapter);
++
++	//todo:cancel other irps
++
++	RT_TRACE(_module_hci_intfs_c_,_drv_err_,("-usb_intf_stop\n"));
++
++}
++
++static void rtw_dev_unload(_adapter *padapter)
++{
++	struct net_device *pnetdev= (struct net_device*)padapter->pnetdev;
++	u8 val8;
++	RT_TRACE(_module_hci_intfs_c_,_drv_err_,("+rtw_dev_unload\n"));
++
++	if(padapter->bup == _TRUE)
++	{
++		DBG_871X("===> rtw_dev_unload\n");
++
++		padapter->bDriverStopped = _TRUE;
++		#ifdef CONFIG_XMIT_ACK
++		if (padapter->xmitpriv.ack_tx)
++			rtw_ack_tx_done(&padapter->xmitpriv, RTW_SCTX_DONE_DRV_STOP);
++		#endif
++
++		//s3.
++		if(padapter->intf_stop)
++		{
++			padapter->intf_stop(padapter);
++		}
++
++		//s4.
++		if(!padapter->pwrctrlpriv.bInternalAutoSuspend )
++		rtw_stop_drv_threads(padapter);
++
++
++		//s5.
++		if(padapter->bSurpriseRemoved == _FALSE)
++		{
++			//DBG_871X("r871x_dev_unload()->rtl871x_hal_deinit()\n");
++#ifdef CONFIG_WOWLAN
++			if((padapter->pwrctrlpriv.bSupportRemoteWakeup==_TRUE)&&(padapter->pwrctrlpriv.wowlan_mode==_TRUE)){
++				DBG_871X("%s bSupportWakeOnWlan==_TRUE  do not run rtw_hal_deinit()\n",__FUNCTION__);
++			}
++			else
++#endif //CONFIG_WOWLAN
++			{
++				rtw_hal_deinit(padapter);
++			}
++			padapter->bSurpriseRemoved = _TRUE;
++		}
++
++		padapter->bup = _FALSE;
++#ifdef CONFIG_WOWLAN
++		padapter->hw_init_completed=_FALSE;
++#endif //CONFIG_WOWLAN
++	}
++	else
++	{
++		RT_TRACE(_module_hci_intfs_c_,_drv_err_,("r871x_dev_unload():padapter->bup == _FALSE\n" ));
++	}
++
++	DBG_871X("<=== rtw_dev_unload\n");
++
++	RT_TRACE(_module_hci_intfs_c_,_drv_err_,("-rtw_dev_unload\n"));
++
++}
++
++static void process_spec_devid(const struct usb_device_id *pdid)
++{
++	u16 vid, pid;
++	u32 flags;
++	int i;
++	int num = sizeof(specific_device_id_tbl)/sizeof(struct specific_device_id);
++
++	for(i=0; i<num; i++)
++	{
++		vid = specific_device_id_tbl[i].idVendor;
++		pid = specific_device_id_tbl[i].idProduct;
++		flags = specific_device_id_tbl[i].flags;
++
++#ifdef CONFIG_80211N_HT
++		if((pdid->idVendor==vid) && (pdid->idProduct==pid) && (flags&SPEC_DEV_ID_DISABLE_HT))
++		{
++			 rtw_ht_enable = 0;
++			 rtw_cbw40_enable = 0;
++			 rtw_ampdu_enable = 0;
++		}
++#endif
++
++#ifdef RTK_DMP_PLATFORM
++		// Change the ifname to wlan10 when PC side WFD dongle plugin on DMP platform.
++		// It is used to distinguish between normal and PC-side wifi dongle/module.
++		if((pdid->idVendor==vid) && (pdid->idProduct==pid) && (flags&SPEC_DEV_ID_ASSIGN_IFNAME))
++		{
++			extern char* ifname;
++			strncpy(ifname, "wlan10", 6);
++			//DBG_871X("%s()-%d: ifname=%s, vid=%04X, pid=%04X\n", __FUNCTION__, __LINE__, ifname, vid, pid);
++		}
++#endif /* RTK_DMP_PLATFORM */
++
++	}
++}
++
++#ifdef SUPPORT_HW_RFOFF_DETECTED
++int rtw_hw_suspend(_adapter *padapter )
++{
++	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
++	struct usb_interface *pusb_intf = adapter_to_dvobj(padapter)->pusbintf;
++	struct net_device *pnetdev = padapter->pnetdev;
++
++	_func_enter_;
++
++	if((!padapter->bup) || (padapter->bDriverStopped)||(padapter->bSurpriseRemoved))
++	{
++		DBG_871X("padapter->bup=%d bDriverStopped=%d bSurpriseRemoved = %d\n",
++			padapter->bup, padapter->bDriverStopped,padapter->bSurpriseRemoved);
++		goto error_exit;
++	}
++
++	if(padapter)//system suspend
++	{
++		LeaveAllPowerSaveMode(padapter);
++
++		DBG_871X("==> rtw_hw_suspend\n");
++		_enter_pwrlock(&pwrpriv->lock);
++		pwrpriv->bips_processing = _TRUE;
++		//padapter->net_closed = _TRUE;
++		//s1.
++		if(pnetdev)
++		{
++			netif_carrier_off(pnetdev);
++			rtw_netif_stop_queue(pnetdev);
++		}
++
++		//s2.
++		rtw_disassoc_cmd(padapter, 500, _FALSE);
++
++		//s2-2.  indicate disconnect to os
++		//rtw_indicate_disconnect(padapter);
++		{
++			struct	mlme_priv *pmlmepriv = &padapter->mlmepriv;
++
++			if(check_fwstate(pmlmepriv, _FW_LINKED))
++			{
++				_clr_fwstate_(pmlmepriv, _FW_LINKED);
++
++				rtw_led_control(padapter, LED_CTL_NO_LINK);
++
++				rtw_os_indicate_disconnect(padapter);
++
++				#ifdef CONFIG_LPS
++				//donnot enqueue cmd
++				rtw_lps_ctrl_wk_cmd(padapter, LPS_CTRL_DISCONNECT, 0);
++				#endif
++			}
++
++		}
++		//s2-3.
++		rtw_free_assoc_resources(padapter, 1);
++
++		//s2-4.
++		rtw_free_network_queue(padapter,_TRUE);
++		#ifdef CONFIG_IPS
++		rtw_ips_dev_unload(padapter);
++		#endif
++		pwrpriv->rf_pwrstate = rf_off;
++		pwrpriv->bips_processing = _FALSE;
++
++		_exit_pwrlock(&pwrpriv->lock);
++	}
++	else
++		goto error_exit;
++
++	_func_exit_;
++	return 0;
++
++error_exit:
++	DBG_871X("%s, failed \n",__FUNCTION__);
++	return (-1);
++
++}
++
++int rtw_hw_resume(_adapter *padapter)
++{
++	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
++	struct usb_interface *pusb_intf = adapter_to_dvobj(padapter)->pusbintf;
++	struct net_device *pnetdev = padapter->pnetdev;
++
++	_func_enter_;
++
++	if(padapter)//system resume
++	{
++		DBG_871X("==> rtw_hw_resume\n");
++		_enter_pwrlock(&pwrpriv->lock);
++		pwrpriv->bips_processing = _TRUE;
++		rtw_reset_drv_sw(padapter);
++
++		if(pm_netdev_open(pnetdev,_FALSE) != 0)
++		{
++			_exit_pwrlock(&pwrpriv->lock);
++			goto error_exit;
++		}
++
++		netif_device_attach(pnetdev);
++		netif_carrier_on(pnetdev);
++
++		if(!rtw_netif_queue_stopped(pnetdev))
++      			rtw_netif_start_queue(pnetdev);
++		else
++			rtw_netif_wake_queue(pnetdev);
++
++		pwrpriv->bkeepfwalive = _FALSE;
++		pwrpriv->brfoffbyhw = _FALSE;
++
++		pwrpriv->rf_pwrstate = rf_on;
++		pwrpriv->bips_processing = _FALSE;
++
++		_exit_pwrlock(&pwrpriv->lock);
++	}
++	else
++	{
++		goto error_exit;
++	}
++
++	_func_exit_;
++
++	return 0;
++error_exit:
++	DBG_871X("%s, Open net dev failed \n",__FUNCTION__);
++	return (-1);
++}
++#endif
++
++static int rtw_suspend(struct usb_interface *pusb_intf, pm_message_t message)
++{
++	struct dvobj_priv *dvobj = usb_get_intfdata(pusb_intf);
++	_adapter *padapter = dvobj->if1;
++	struct net_device *pnetdev = padapter->pnetdev;
++	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
++	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
++	struct usb_device *usb_dev = interface_to_usbdev(pusb_intf);
++#ifdef CONFIG_WOWLAN
++	struct wowlan_ioctl_param poidparam;
++#endif // CONFIG_WOWLAN
++	int ret = 0;
++	u32 start_time = rtw_get_current_time();
++	_func_enter_;
++
++	DBG_871X("==> %s (%s:%d)\n",__FUNCTION__, current->comm, current->pid);
++
++	if((!padapter->bup) || (padapter->bDriverStopped)||(padapter->bSurpriseRemoved))
++	{
++		DBG_871X("padapter->bup=%d bDriverStopped=%d bSurpriseRemoved = %d\n",
++			padapter->bup, padapter->bDriverStopped,padapter->bSurpriseRemoved);
++		goto exit;
++	}
++
++	if(pwrpriv->bInternalAutoSuspend )
++	{
++	#ifdef CONFIG_AUTOSUSPEND
++	#ifdef SUPPORT_HW_RFOFF_DETECTED
++		// The FW command register update must after MAC and FW init ready.
++		if((padapter->bFWReady) && ( padapter->pwrctrlpriv.bHWPwrPindetect ) && (padapter->registrypriv.usbss_enable ))
++		{
++			u8 bOpen = _TRUE;
++			rtw_interface_ps_func(padapter,HAL_USB_SELECT_SUSPEND,&bOpen);
++			//rtl8192c_set_FwSelectSuspend_cmd(padapter,_TRUE ,500);//note fw to support hw power down ping detect
++		}
++	#endif
++	#endif
++	}
++	pwrpriv->bInSuspend = _TRUE;
++	rtw_cancel_all_timer(padapter);
++	LeaveAllPowerSaveMode(padapter);
++
++	rtw_stop_cmd_thread(padapter);
++
++	_enter_pwrlock(&pwrpriv->lock);
++	//padapter->net_closed = _TRUE;
++	//s1.
++	if(pnetdev)
++	{
++		netif_carrier_off(pnetdev);
++		rtw_netif_stop_queue(pnetdev);
++	}
++#ifdef CONFIG_WOWLAN
++	if(padapter->pwrctrlpriv.bSupportRemoteWakeup==_TRUE&&padapter->pwrctrlpriv.wowlan_mode==_TRUE){
++		u8 ps_mode=PS_MODE_MIN;
++		//set H2C command
++		poidparam.subcode=WOWLAN_ENABLE;
++		rtw_hal_set_hwreg(padapter,HW_VAR_WOWLAN,(u8 *)&poidparam);
++		//rtw_hal_set_hwreg(padapter, HW_VAR_H2C_FW_PWRMODE, &ps_mode);
++		//rtw_set_rpwm(padapter, PS_STATE_S2);
++	}
++	else
++#endif //CONFIG_WOWLAN
++	{
++		//s2.
++		rtw_disassoc_cmd(padapter, 0, _FALSE);
++	}
++
++#ifdef CONFIG_LAYER2_ROAMING_RESUME
++	if(check_fwstate(pmlmepriv, WIFI_STATION_STATE) && check_fwstate(pmlmepriv, _FW_LINKED) )
++	{
++		//printk("%s:%d assoc_ssid:%s\n", __FUNCTION__, __LINE__, pmlmepriv->assoc_ssid.Ssid);
++		DBG_871X("%s:%d %s(" MAC_FMT "), length:%d assoc_ssid.length:%d\n",__FUNCTION__, __LINE__,
++				pmlmepriv->cur_network.network.Ssid.Ssid,
++				MAC_ARG(pmlmepriv->cur_network.network.MacAddress),
++				pmlmepriv->cur_network.network.Ssid.SsidLength,
++				pmlmepriv->assoc_ssid.SsidLength);
++		rtw_set_roaming(padapter, 1);
++		}
++#endif
++	//s2-2.  indicate disconnect to os
++	rtw_indicate_disconnect(padapter);
++	//s2-3.
++	rtw_free_assoc_resources(padapter, 1);
++#ifdef CONFIG_AUTOSUSPEND
++	if(!pwrpriv->bInternalAutoSuspend )
++#endif
++	//s2-4.
++	rtw_free_network_queue(padapter, _TRUE);
++
++	rtw_dev_unload(padapter);
++#ifdef CONFIG_AUTOSUSPEND
++	pwrpriv->rf_pwrstate = rf_off;
++	pwrpriv->bips_processing = _FALSE;
++#endif
++	_exit_pwrlock(&pwrpriv->lock);
++
++	if(check_fwstate(pmlmepriv, _FW_UNDER_SURVEY))
++		rtw_indicate_scan_done(padapter, 1);
++
++	if(check_fwstate(pmlmepriv, _FW_UNDER_LINKING))
++		rtw_indicate_disconnect(padapter);
++
++exit:
++	DBG_871X("<===  %s return %d.............. in %dms\n", __FUNCTION__
++		, ret, rtw_get_passing_time_ms(start_time));
++
++	_func_exit_;
++	return ret;
++}
++
++static int rtw_resume(struct usb_interface *pusb_intf)
++{
++	struct dvobj_priv *dvobj = usb_get_intfdata(pusb_intf);
++	_adapter *padapter = dvobj->if1;
++	struct net_device *pnetdev = padapter->pnetdev;
++	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
++	 int ret = 0;
++
++	if(pwrpriv->bInternalAutoSuspend ){
++ 		ret = rtw_resume_process(padapter);
++	} else {
++#ifdef CONFIG_RESUME_IN_WORKQUEUE
++		rtw_resume_in_workqueue(pwrpriv);
++#else
++		if (rtw_is_earlysuspend_registered(pwrpriv)
++			#ifdef CONFIG_WOWLAN
++			&& !padapter->pwrctrlpriv.wowlan_mode
++			#endif /* CONFIG_WOWLAN */
++		) {
++			/* jeff: bypass resume here, do in late_resume */
++			rtw_set_do_late_resume(pwrpriv, _TRUE);
++		} else {
++			ret = rtw_resume_process(padapter);
++		}
++#endif /* CONFIG_RESUME_IN_WORKQUEUE */
++	}
++
++	return ret;
++
++}
++
++int rtw_resume_process(_adapter *padapter)
++{
++	struct net_device *pnetdev;
++	struct pwrctrl_priv *pwrpriv;
++	int ret = -1;
++	u32 start_time = rtw_get_current_time();
++	_func_enter_;
++
++	DBG_871X("==> %s (%s:%d)\n",__FUNCTION__, current->comm, current->pid);
++
++	if(padapter) {
++		pnetdev= padapter->pnetdev;
++		pwrpriv = &padapter->pwrctrlpriv;
++	} else {
++		goto exit;
++	}
++
++	_enter_pwrlock(&pwrpriv->lock);
++	rtw_reset_drv_sw(padapter);
++	pwrpriv->bkeepfwalive = _FALSE;
++
++	DBG_871X("bkeepfwalive(%x)\n",pwrpriv->bkeepfwalive);
++	if(pm_netdev_open(pnetdev,_TRUE) != 0) {
++		_exit_pwrlock(&pwrpriv->lock);
++		goto exit;
++	}
++
++	netif_device_attach(pnetdev);
++	netif_carrier_on(pnetdev);
++
++#ifdef CONFIG_AUTOSUSPEND
++	if(pwrpriv->bInternalAutoSuspend )
++	{
++		#ifdef CONFIG_AUTOSUSPEND
++		#ifdef SUPPORT_HW_RFOFF_DETECTED
++			// The FW command register update must after MAC and FW init ready.
++		if((padapter->bFWReady) && ( padapter->pwrctrlpriv.bHWPwrPindetect ) && (padapter->registrypriv.usbss_enable ))
++		{
++			//rtl8192c_set_FwSelectSuspend_cmd(padapter,_FALSE ,500);//note fw to support hw power down ping detect
++			u8 bOpen = _FALSE;
++			rtw_interface_ps_func(padapter,HAL_USB_SELECT_SUSPEND,&bOpen);
++		}
++		#endif
++		#endif
++
++		pwrpriv->bInternalAutoSuspend = _FALSE;
++		pwrpriv->brfoffbyhw = _FALSE;
++	}
++#endif
++	_exit_pwrlock(&pwrpriv->lock);
++
++	if( padapter->pid[1]!=0) {
++		DBG_871X("pid[1]:%d\n",padapter->pid[1]);
++		rtw_signal_process(padapter->pid[1], SIGUSR2);
++	}
++
++	#ifdef CONFIG_LAYER2_ROAMING_RESUME
++	rtw_roaming(padapter, NULL);
++	#endif
++
++	ret = 0;
++exit:
++	#ifdef CONFIG_RESUME_IN_WORKQUEUE
++	rtw_unlock_suspend();
++	#endif //CONFIG_RESUME_IN_WORKQUEUE
++
++	pwrpriv->bInSuspend = _FALSE;
++	DBG_871X("<===  %s return %d.............. in %dms\n", __FUNCTION__
++		, ret, rtw_get_passing_time_ms(start_time));
++
++	_func_exit_;
++
++	return ret;
++}
++
++#ifdef CONFIG_AUTOSUSPEND
++void autosuspend_enter(_adapter* padapter)
++{
++	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
++	struct dvobj_priv *dvobj = adapter_to_dvobj(padapter);
++
++	pwrpriv->bInternalAutoSuspend = _TRUE;
++	pwrpriv->bips_processing = _TRUE;
++
++	DBG_871X("==>autosuspend_enter...........\n");
++
++	if(rf_off == pwrpriv->change_rfpwrstate )
++	{
++		#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35))
++		usb_enable_autosuspend(dvobj->pusbdev);
++		#else
++		dvobj->pusbdev->autosuspend_disabled = 0;//autosuspend disabled by the user
++		#endif
++
++		#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,33))
++			usb_autopm_put_interface(dvobj->pusbintf);
++		#elif (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,20))
++			usb_autopm_enable(dvobj->pusbintf);
++		#else
++			usb_autosuspend_device(dvobj->pusbdev, 1);
++		#endif
++	}
++	#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,32))
++	DBG_871X("...pm_usage_cnt(%d).....\n", atomic_read(&(dvobj->pusbintf->pm_usage_cnt)));
++	#else
++	DBG_871X("...pm_usage_cnt(%d).....\n", dvobj->pusbintf->pm_usage_cnt);
++	#endif
++
++}
++int autoresume_enter(_adapter* padapter)
++{
++	int result = _SUCCESS;
++	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
++	struct security_priv* psecuritypriv=&(padapter->securitypriv);
++	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
++	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
++	struct dvobj_priv *dvobj = adapter_to_dvobj(padapter);
++
++
++	DBG_871X("====> autoresume_enter \n");
++
++	if(rf_off == pwrpriv->rf_pwrstate )
++	{
++		pwrpriv->ps_flag = _FALSE;
++		#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,33))
++			if (usb_autopm_get_interface(dvobj->pusbintf) < 0)
++			{
++				DBG_871X( "can't get autopm: %d\n", result);
++				result = _FAIL;
++				goto error_exit;
++			}
++		#elif (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,20))
++			usb_autopm_disable(dvobj->pusbintf);
++		#else
++			usb_autoresume_device(dvobj->pusbdev, 1);
++		#endif
++
++		#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,32))
++		DBG_871X("...pm_usage_cnt(%d).....\n", atomic_read(&(dvobj->pusbintf->pm_usage_cnt)));
++		#else
++		DBG_871X("...pm_usage_cnt(%d).....\n", dvobj->pusbintf->pm_usage_cnt);
++		#endif
++	}
++	DBG_871X("<==== autoresume_enter \n");
++error_exit:
++
++	return result;
++}
++#endif
++
++#ifdef CONFIG_PLATFORM_RTD2880B
++extern void rtd2885_wlan_netlink_sendMsg(char *action_string, char *name);
++#endif
++
++#ifdef CONFIG_PLATFORM_ARM_SUNxI
++#include <mach/sys_config.h>
++extern int sw_usb_disable_hcd(__u32 usbc_no);
++extern int sw_usb_enable_hcd(__u32 usbc_no);
++static int usb_wifi_host = 2;
++#endif
++
++#ifdef CONFIG_PLATFORM_ARM_SUN6I
++#include <mach/sys_config.h>
++extern int sw_usb_disable_hcd(__u32 usbc_no);
++extern int sw_usb_enable_hcd(__u32 usbc_no);
++extern void wifi_pm_power(int on);
++static script_item_u item;
++#endif
++
++_adapter *rtw_usb_if1_init(struct dvobj_priv *dvobj,
++	struct usb_interface *pusb_intf, const struct usb_device_id *pdid)
++{
++	_adapter *padapter = NULL;
++	struct net_device *pnetdev = NULL;
++	int status = _FAIL;
++
++	if ((padapter = (_adapter *)rtw_zvmalloc(sizeof(*padapter))) == NULL) {
++		goto exit;
++	}
++	padapter->dvobj = dvobj;
++	dvobj->if1 = padapter;
++
++	padapter->bDriverStopped=_TRUE;
++
++	dvobj->padapters[dvobj->iface_nums++] = padapter;
++	padapter->iface_id = IFACE_ID0;
++
++#if defined(CONFIG_CONCURRENT_MODE) || defined(CONFIG_DUALMAC_CONCURRENT)
++	//set adapter_type/iface type for primary padapter
++	padapter->isprimary = _TRUE;
++	padapter->adapter_type = PRIMARY_ADAPTER;
++	#ifndef CONFIG_HWPORT_SWAP
++	padapter->iface_type = IFACE_PORT0;
++	#else
++	padapter->iface_type = IFACE_PORT1;
++	#endif
++#endif
++
++	#ifndef RTW_DVOBJ_CHIP_HW_TYPE
++	//step 1-1., decide the chip_type via vid/pid
++	padapter->interface_type = RTW_USB;
++	decide_chip_type_by_usb_device_id(padapter, pdid);
++	#endif
++
++	if((pnetdev = rtw_init_netdev(padapter)) == NULL) {
++		goto free_adapter;
++	}
++	SET_NETDEV_DEV(pnetdev, dvobj_to_dev(dvobj));
++	padapter = rtw_netdev_priv(pnetdev);
++
++	//step 2. hook HalFunc, allocate HalData
++	if(padapter->chip_type == RTL8188C_8192C) {
++		#ifdef CONFIG_RTL8192C
++		rtl8192cu_set_hal_ops(padapter);
++		#endif
++	} else if(padapter->chip_type == RTL8192D) {
++		#ifdef CONFIG_RTL8192D
++		rtl8192du_set_hal_ops(padapter);
++		#endif
++	} else {
++		DBG_871X("Detect NULL_CHIP_TYPE\n");
++		goto free_hal_data;
++	}
++
++	//step 3.
++	padapter->intf_start=&usb_intf_start;
++	padapter->intf_stop=&usb_intf_stop;
++
++	//.2
++	if ((rtw_init_io_priv(padapter, usb_set_intf_ops)) == _FAIL) {
++		RT_TRACE(_module_hci_intfs_c_,_drv_err_,(" \n Can't init io_reqs\n"));
++		goto free_hal_data;
++	}
++
++	rtw_hal_read_chip_version(padapter);
++
++	//.4 usb endpoint mapping
++	rtw_hal_chip_configure(padapter);
++
++	//step 4. read efuse/eeprom data and get mac_addr
++	rtw_hal_read_chip_info(padapter);
++
++	if (rtw_handle_dualmac(padapter, 1) != _SUCCESS)
++		goto free_hal_data;
++
++#ifdef CONFIG_IOCTL_CFG80211
++	if(rtw_wdev_alloc(padapter, dvobj_to_dev(dvobj)) != 0) {
++		goto handle_dualmac;
++	}
++#endif
++
++	//step 5.
++	if (rtw_init_drv_sw(padapter) == _FAIL) {
++		RT_TRACE(_module_hci_intfs_c_,_drv_err_,("Initialize driver software resource Failed!\n"));
++		goto free_wdev;
++	}
++
++#ifdef CONFIG_PM
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18))
++	if(padapter->pwrctrlpriv.bSupportRemoteWakeup)
++	{
++		dvobj->pusbdev->do_remote_wakeup=1;
++		pusb_intf->needs_remote_wakeup = 1;
++		device_init_wakeup(&pusb_intf->dev, 1);
++		DBG_871X("\n  padapter->pwrctrlpriv.bSupportRemoteWakeup~~~~~~\n");
++		DBG_871X("\n  padapter->pwrctrlpriv.bSupportRemoteWakeup~~~[%d]~~~\n",device_may_wakeup(&pusb_intf->dev));
++	}
++#endif
++#endif
++
++#ifdef CONFIG_AUTOSUSPEND
++	if( padapter->registrypriv.power_mgnt != PS_MODE_ACTIVE )
++	{
++		if(padapter->registrypriv.usbss_enable ){ 	/* autosuspend (2s delay) */
++			#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,38))
++			dvobj->pusbdev->dev.power.autosuspend_delay = 0 * HZ;//15 * HZ; idle-delay time
++			#else
++			dvobj->pusbdev->autosuspend_delay = 0 * HZ;//15 * HZ; idle-delay time
++			#endif
++
++			#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35))
++			usb_enable_autosuspend(dvobj->pusbdev);
++			#elif  (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,22) && LINUX_VERSION_CODE<=KERNEL_VERSION(2,6,34))
++			padapter->bDisableAutosuspend = dvobj->pusbdev->autosuspend_disabled ;
++			dvobj->pusbdev->autosuspend_disabled = 0;//autosuspend disabled by the user
++			#endif
++
++			usb_autopm_get_interface(dvobj->pusbintf );//init pm_usage_cnt ,let it start from 1
++
++			#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,32))
++			DBG_871X("%s...pm_usage_cnt(%d).....\n",__FUNCTION__, atomic_read(&(dvobj->pusbintf ->pm_usage_cnt)));
++			#else
++			DBG_871X("%s...pm_usage_cnt(%d).....\n",__FUNCTION__, dvobj->pusbintf ->pm_usage_cnt);
++			#endif
++		}
++	}
++#endif
++
++	// set mac addr
++	rtw_macaddr_cfg(padapter->eeprompriv.mac_addr);
++	rtw_init_wifidirect_addrs(padapter, padapter->eeprompriv.mac_addr, padapter->eeprompriv.mac_addr);
++
++	DBG_871X("bDriverStopped:%d, bSurpriseRemoved:%d, bup:%d, hw_init_completed:%d\n"
++		,padapter->bDriverStopped
++		,padapter->bSurpriseRemoved
++		,padapter->bup
++		,padapter->hw_init_completed
++	);
++
++	status = _SUCCESS;
++
++free_wdev:
++	if(status != _SUCCESS) {
++		#ifdef CONFIG_IOCTL_CFG80211
++		rtw_wdev_unregister(padapter->rtw_wdev);
++		rtw_wdev_free(padapter->rtw_wdev);
++		#endif
++	}
++handle_dualmac:
++	if (status != _SUCCESS)
++		rtw_handle_dualmac(padapter, 0);
++free_hal_data:
++	if(status != _SUCCESS && padapter->HalData)
++		rtw_mfree(padapter->HalData, sizeof(*(padapter->HalData)));
++free_adapter:
++	if (status != _SUCCESS) {
++		if (pnetdev)
++			rtw_free_netdev(pnetdev);
++		else if (padapter)
++			rtw_vmfree((u8*)padapter, sizeof(*padapter));
++		padapter = NULL;
++	}
++exit:
++	return padapter;
++}
++
++static void rtw_usb_if1_deinit(_adapter *if1)
++{
++	struct net_device *pnetdev = if1->pnetdev;
++	struct mlme_priv *pmlmepriv= &if1->mlmepriv;
++
++	if(check_fwstate(pmlmepriv, _FW_LINKED))
++		rtw_disassoc_cmd(if1, 0, _FALSE);
++
++#ifdef CONFIG_AP_MODE
++	free_mlme_ap_info(if1);
++	#ifdef CONFIG_HOSTAPD_MLME
++	hostapd_mode_unload(if1);
++	#endif
++#endif
++
++	rtw_cancel_all_timer(if1);
++#ifdef CONFIG_WOWLAN
++	if1->pwrctrlpriv.wowlan_mode=_FALSE;
++#endif //CONFIG_WOWLAN
++	rtw_dev_unload(if1);
++
++	DBG_871X("%s, hw_init_completed=%d\n", __func__, if1->hw_init_completed);
++
++	//s6.
++	rtw_handle_dualmac(if1, 0);
++
++#ifdef CONFIG_IOCTL_CFG80211
++	if (if1->rtw_wdev)
++		rtw_wdev_free(if1->rtw_wdev);
++#endif //CONFIG_IOCTL_CFG80211
++
++	rtw_free_drv_sw(if1);
++
++	if(pnetdev)
++		rtw_free_netdev(pnetdev);
++
++#ifdef CONFIG_PLATFORM_RTD2880B
++	DBG_871X("wlan link down\n");
++	rtd2885_wlan_netlink_sendMsg("linkdown", "8712");
++#endif
++
++}
++
++/*
++ * drv_init() - a device potentially for us
++ *
++ * notes: drv_init() is called when the bus driver has located a card for us to support.
++ *        We accept the new device by returning 0.
++*/
++
++_adapter  *rtw_sw_export = NULL;
++
++static int rtw_drv_init(struct usb_interface *pusb_intf, const struct usb_device_id *did)
++{
++	int i;
++	uint status = _FAIL;
++	_adapter *if1 = NULL, *if2 = NULL;
++	struct dvobj_priv *dvobj = NULL;
++
++
++	RT_TRACE(_module_hci_intfs_c_, _drv_err_, ("+rtw_drv_init\n"));
++
++
++	//step 0.
++	process_spec_devid(did);
++
++	/* Initialize dvobj_priv */
++	if ((dvobj = usb_dvobj_init(pusb_intf)) == NULL) {
++		RT_TRACE(_module_hci_intfs_c_, _drv_err_, ("initialize device object priv Failed!\n"));
++		goto exit;
++	}
++
++	/* Initialize if1 */
++	if ((if1 = rtw_usb_if1_init(dvobj, pusb_intf, did)) == NULL) {
++		DBG_871X("rtw_usb_if1_init Failed!\n");
++		goto free_dvobj;
++	}
++
++	/* Initialize if2 */
++#ifdef CONFIG_CONCURRENT_MODE
++	if((if2 = rtw_drv_if2_init(if1, usb_set_intf_ops)) == NULL) {
++		goto free_if1;
++	}
++#ifdef CONFIG_MULTI_VIR_IFACES
++	for(i=0; i<if1->registrypriv.ext_iface_num;i++)
++	{
++		if(rtw_drv_add_vir_if(if1, usb_set_intf_ops) == NULL)
++		{
++			DBG_871X("rtw_drv_add_iface failed! (%d)\n", i);
++			goto free_if1;
++		}
++	}
++#endif //CONFIG_MULTI_VIR_IFACES
++#endif
++
++#ifdef CONFIG_INTEL_PROXIM
++	rtw_sw_export=if1;
++#endif
++
++#ifdef CONFIG_GLOBAL_UI_PID
++	if (ui_pid[1]!=0) {
++		DBG_871X("ui_pid[1]:%d\n",ui_pid[1]);
++		rtw_signal_process(ui_pid[1], SIGUSR2);
++	}
++#endif
++
++	//dev_alloc_name && register_netdev
++	if((status = rtw_drv_register_netdev(if1)) != _SUCCESS) {
++		goto free_if1;
++	}
++
++#ifdef CONFIG_HOSTAPD_MLME
++	hostapd_mode_init(if1);
++#endif
++
++#ifdef CONFIG_PLATFORM_RTD2880B
++	DBG_871X("wlan link up\n");
++	rtd2885_wlan_netlink_sendMsg("linkup", "8712");
++#endif
++
++#ifdef RTK_DMP_PLATFORM
++	rtw_proc_init_one(if1->pnetdev);
++#endif
++
++	RT_TRACE(_module_hci_intfs_c_,_drv_err_,("-871x_drv - drv_init, success!\n"));
++
++	status = _SUCCESS;
++
++free_if1:
++	if (status != _SUCCESS && if1) {
++		rtw_usb_if1_deinit(if1);
++	}
++free_dvobj:
++	if (status != _SUCCESS)
++		usb_dvobj_deinit(pusb_intf);
++exit:
++	return status == _SUCCESS?0:-ENODEV;
++}
++
++/*
++ * dev_remove() - our device is being removed
++*/
++//rmmod module & unplug(SurpriseRemoved) will call r871xu_dev_remove() => how to recognize both
++static void rtw_dev_remove(struct usb_interface *pusb_intf)
++{
++	struct dvobj_priv *dvobj = usb_get_intfdata(pusb_intf);
++	_adapter *padapter = dvobj->if1;
++
++_func_exit_;
++
++	DBG_871X("+rtw_dev_remove\n");
++	RT_TRACE(_module_hci_intfs_c_,_drv_err_,("+dev_remove()\n"));
++
++	dvobj->processing_dev_remove = _TRUE;
++
++	rtw_unregister_netdevs(dvobj);
++
++	if(usb_drv->drv_registered == _TRUE)
++	{
++		//DBG_871X("r871xu_dev_remove():padapter->bSurpriseRemoved == _TRUE\n");
++		padapter->bSurpriseRemoved = _TRUE;
++	}
++	/*else
++	{
++		//DBG_871X("r871xu_dev_remove():module removed\n");
++		padapter->hw_init_completed = _FALSE;
++	}*/
++
++#if defined(CONFIG_HAS_EARLYSUSPEND) || defined(CONFIG_ANDROID_POWER)
++	rtw_unregister_early_suspend(&padapter->pwrctrlpriv);
++#endif
++
++	rtw_pm_set_ips(padapter, IPS_NONE);
++	rtw_pm_set_lps(padapter, PS_MODE_ACTIVE);
++
++	LeaveAllPowerSaveMode(padapter);
++
++#ifdef CONFIG_CONCURRENT_MODE
++#ifdef CONFIG_MULTI_VIR_IFACES
++	rtw_drv_stop_vir_ifaces(dvobj);
++#endif //CONFIG_MULTI_VIR_IFACES
++	rtw_drv_if2_stop(dvobj->if2);
++#endif	//CONFIG_CONCURRENT_MODE
++
++	rtw_usb_if1_deinit(padapter);
++
++#ifdef CONFIG_CONCURRENT_MODE
++#ifdef CONFIG_MULTI_VIR_IFACES
++	rtw_drv_free_vir_ifaces(dvobj);
++#endif //CONFIG_MULTI_VIR_IFACES
++	rtw_drv_if2_free(dvobj->if2);
++#endif //CONFIG_CONCURRENT_MODE
++
++	usb_dvobj_deinit(pusb_intf);
++
++	RT_TRACE(_module_hci_intfs_c_,_drv_err_,("-dev_remove()\n"));
++	DBG_871X("-r871xu_dev_remove, done\n");
++
++
++#ifdef CONFIG_INTEL_PROXIM
++	rtw_sw_export=NULL;
++#endif
++
++_func_exit_;
++
++	return;
++
++}
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24))
++extern int console_suspend_enabled;
++#endif
++
++static int __init rtw_drv_entry(void)
++{
++#ifdef CONFIG_PLATFORM_RTK_DMP
++	u32 tmp;
++	tmp=readl((volatile unsigned int*)0xb801a608);
++	tmp &= 0xffffff00;
++	tmp |= 0x55;
++	writel(tmp,(volatile unsigned int*)0xb801a608);//write dummy register for 1055
++#endif
++#ifdef CONFIG_PLATFORM_ARM_SUNxI
++#ifndef CONFIG_RTL8723A
++	int ret = 0;
++	/* ----------get usb_wifi_usbc_num------------- */
++	ret = script_parser_fetch("usb_wifi_para", "usb_wifi_usbc_num", (int *)&usb_wifi_host, 64);
++	if(ret != 0){
++		printk("ERR: script_parser_fetch usb_wifi_usbc_num failed\n");
++		ret = -ENOMEM;
++		return ret;
++	}
++	printk("sw_usb_enable_hcd: usbc_num = %d\n", usb_wifi_host);
++	sw_usb_enable_hcd(usb_wifi_host);
++#endif //CONFIG_RTL8723A
++#endif //CONFIG_PLATFORM_ARM_SUNxI
++
++#ifdef CONFIG_PLATFORM_ARM_SUN6I
++	script_item_value_type_e type;
++
++	type = script_get_item("wifi_para", "wifi_usbc_id", &item);
++	if(SCIRPT_ITEM_VALUE_TYPE_INT != type){
++		printk("ERR: script_get_item wifi_usbc_id failed\n");
++		return -ENOMEM;
++	}
++
++	printk("sw_usb_enable_hcd: usbc_num = %d\n", item.val);
++	wifi_pm_power(1);
++	mdelay(10);
++	sw_usb_enable_hcd(item.val);
++#endif //CONFIG_PLATFORM_ARM_SUN6I
++
++	RT_TRACE(_module_hci_intfs_c_,_drv_err_,("+rtw_drv_entry\n"));
++
++	DBG_871X(DRV_NAME " driver version=%s\n", DRIVERVERSION);
++	DBG_871X("build time: %s %s\n", __DATE__, __TIME__);
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24))
++	//console_suspend_enabled=0;
++#endif
++
++	rtw_suspend_lock_init();
++
++	usb_drv->drv_registered = _TRUE;
++	return usb_register(&usb_drv->usbdrv);
++}
++
++static void __exit rtw_drv_halt(void)
++{
++	RT_TRACE(_module_hci_intfs_c_,_drv_err_,("+rtw_drv_halt\n"));
++	DBG_871X("+rtw_drv_halt\n");
++
++	usb_drv->drv_registered = _FALSE;
++	usb_deregister(&usb_drv->usbdrv);
++
++#ifdef CONFIG_PLATFORM_ARM_SUNxI
++#ifndef CONFIG_RTL8723A
++	printk("sw_usb_disable_hcd: usbc_num = %d\n", usb_wifi_host);
++	sw_usb_disable_hcd(usb_wifi_host);
++#endif //ifndef CONFIG_RTL8723A
++#endif	//CONFIG_PLATFORM_ARM_SUNxI
++#ifdef CONFIG_PLATFORM_ARM_SUN6I
++	sw_usb_disable_hcd(item.val);
++	wifi_pm_power(0);
++#endif
++
++	rtw_suspend_lock_uninit();
++	DBG_871X("-rtw_drv_halt\n");
++
++	rtw_mstat_dump();
++}
++
++
++module_init(rtw_drv_entry);
++module_exit(rtw_drv_halt);
++
++#ifdef CONFIG_WOWLAN
++#ifdef CONFIG_WOWLAN_MANUAL
++
++int rtw_resume_toshiba(PADAPTER Adapter)
++{
++	struct dvobj_priv *pdvobjpriv;
++	pdvobjpriv = adapter_to_dvobj(Adapter);
++
++	rtw_resume(pdvobjpriv->pusbintf);
++	return 0;
++}
++
++int rtw_suspend_toshiba(PADAPTER Adapter)
++{
++	pm_message_t msg;
++	struct dvobj_priv *pdvobjpriv;
++	pdvobjpriv = adapter_to_dvobj(Adapter);
++	msg.event=0;
++	//for Toshiba only, they should call rtw_suspend before suspend
++	rtw_suspend(pdvobjpriv->pusbintf, msg);
++	return 0;
++}
++EXPORT_SYMBOL(rtw_suspend_toshiba);
++EXPORT_SYMBOL(rtw_resume_toshiba);
++#endif //CONFIG_WOWLAN_MANUAL
++#endif //CONFIG_WOWLAN
++
++#ifdef CONFIG_INTEL_PROXIM
++_adapter  *rtw_usb_get_sw_pointer(void)
++{
++	return rtw_sw_export;
++}
++EXPORT_SYMBOL(rtw_usb_get_sw_pointer);
++#endif	//CONFIG_INTEL_PROXIM
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/os_dep/linux/usb_ops_linux.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/os_dep/linux/usb_ops_linux.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/os_dep/linux/usb_ops_linux.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/os_dep/linux/usb_ops_linux.c	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,649 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *******************************************************************************/
++#define _USB_OPS_LINUX_C_
++
++#include <drv_types.h>
++#include <usb_ops_linux.h>
++#include <rtw_sreset.h>
++
++#ifdef CONFIG_USB_SUPPORT_ASYNC_VDN_REQ
++static void _usbctrl_vendorreq_async_callback(struct urb *urb, struct pt_regs *regs)
++{
++	if (urb) {
++		if (urb->context) {
++			rtw_mfree(urb->context);
++		}
++		usb_free_urb(urb);
++	}
++}
++
++static int _usbctrl_vendorreq_async_write(struct usb_device *udev, u8 request,
++	u16 value, u16 index, void *pdata, u16 len, u8 requesttype)
++{
++	int rc;
++	unsigned int pipe;
++	u8 reqtype;
++	struct usb_ctrlrequest *dr;
++	struct urb *urb;
++	struct rtl819x_async_write_data {
++		u8 data[VENDOR_CMD_MAX_DATA_LEN];
++		struct usb_ctrlrequest dr;
++	} *buf;
++
++
++	if (requesttype == VENDOR_READ) {
++		pipe = usb_rcvctrlpipe(udev, 0);//read_in
++		reqtype =  REALTEK_USB_VENQT_READ;
++	}
++	else {
++		pipe = usb_sndctrlpipe(udev, 0);//write_out
++		reqtype =  REALTEK_USB_VENQT_WRITE;
++	}
++	
++	buf = (struct rtl819x_async_write_data *)rtw_zmalloc(sizeof(*buf));
++	if (!buf) {
++		rc = -ENOMEM;
++		goto exit;
++	}
++
++	urb = usb_alloc_urb(0, GFP_ATOMIC);
++	if (!urb) {
++		rtw_mfree((u8*)buf, sizeof(*buf));
++		rc = -ENOMEM;
++		goto exit;
++	}
++
++	dr = &buf->dr;
++
++	dr->bRequestType = reqtype;
++	dr->bRequest = request;
++	dr->wValue = cpu_to_le16(value);
++	dr->wIndex = cpu_to_le16(index);
++	dr->wLength = cpu_to_le16(len);
++
++	_rtw_memcpy(buf, pdata, len);
++
++	usb_fill_control_urb(urb, udev, pipe, (unsigned char *)dr, buf, len,
++		_usbctrl_vendorreq_async_callback, buf);
++
++	rc = usb_submit_urb(urb, GFP_ATOMIC);
++	if (rc < 0) {
++		rtw_mfree((u8*)buf, sizeof(*buf));
++		usb_free_urb(urb);
++	}
++
++exit:
++	return rc;
++}
++
++int usb_write_async(struct usb_device *udev, u32 addr, void *pdata, u16 len)
++{
++	u8 request;
++	u8 requesttype;
++	u16 wvalue;
++	u16 index;
++
++	int ret;
++
++	requesttype = VENDOR_WRITE;//write_out
++	request = REALTEK_USB_VENQT_CMD_REQ;
++	index = REALTEK_USB_VENQT_CMD_IDX;//n/a
++
++	wvalue = (u16)(addr&0x0000ffff);
++
++	ret = _usbctrl_vendorreq_async_write(udev, request, wvalue, index, pdata, len, requesttype);
++
++	return ret;
++}
++
++int usb_async_write8(struct intf_hdl *pintfhdl, u32 addr, u8 val)
++{
++	u8 data;
++	int ret;
++	struct dvobj_priv  *pdvobjpriv = (struct dvobj_priv  *)pintfhdl->pintf_dev;
++	struct usb_device *udev=pdvobjpriv->pusbdev;
++
++	_func_enter_;
++	data = val;
++	ret = usb_write_async(udev, addr, &data, 1);
++	_func_exit_;
++
++	return ret;
++}
++
++int usb_async_write16(struct intf_hdl *pintfhdl, u32 addr, u16 val)
++{
++	u16 data;
++	int ret;
++	struct dvobj_priv  *pdvobjpriv = (struct dvobj_priv  *)pintfhdl->pintf_dev;
++	struct usb_device *udev=pdvobjpriv->pusbdev;
++
++	_func_enter_;
++	data = val;
++	ret = usb_write_async(udev, addr, &data, 2);
++	_func_exit_;
++
++	return ret;
++}
++
++int usb_async_write32(struct intf_hdl *pintfhdl, u32 addr, u32 val)
++{
++	u32 data;
++	int ret;
++	struct dvobj_priv  *pdvobjpriv = (struct dvobj_priv  *)pintfhdl->pintf_dev;
++	struct usb_device *udev=pdvobjpriv->pusbdev;
++
++	_func_enter_;
++	data = val;
++	ret = usb_write_async(udev, addr, &data, 4);
++	_func_exit_;
++	
++	return ret;
++}
++#endif /* CONFIG_USB_SUPPORT_ASYNC_VDN_REQ */
++
++unsigned int ffaddr2pipehdl(struct dvobj_priv *pdvobj, u32 addr)
++{
++	unsigned int pipe=0;
++	int ep_num=0;
++	_adapter *padapter = pdvobj->if1;
++	struct usb_device *pusbd = pdvobj->pusbdev;	
++	HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
++
++	if (addr == RECV_BULK_IN_ADDR) {	
++		pipe=usb_rcvbulkpipe(pusbd, pHalData->RtBulkInPipe);
++		
++	} else if (addr == RECV_INT_IN_ADDR) {	
++		pipe=usb_rcvbulkpipe(pusbd, pHalData->RtIntInPipe);
++		
++	} else if (addr < HW_QUEUE_ENTRY) {
++		ep_num = pHalData->Queue2EPNum[addr];	
++		pipe = usb_sndbulkpipe(pusbd, ep_num);
++	}
++
++	return pipe;
++}
++
++struct zero_bulkout_context{
++	void *pbuf;
++	void *purb;
++	void *pirp;
++	void *padapter;
++};
++
++static void usb_bulkout_zero_complete(struct urb *purb, struct pt_regs *regs)
++{	
++	struct zero_bulkout_context *pcontext = (struct zero_bulkout_context *)purb->context;
++
++	//DBG_8192C("+usb_bulkout_zero_complete\n");
++	
++	if(pcontext)
++	{
++		if(pcontext->pbuf)
++		{			
++			rtw_mfree(pcontext->pbuf, sizeof(int));	
++		}	
++
++		if(pcontext->purb && (pcontext->purb==purb))
++		{
++			usb_free_urb(pcontext->purb);
++		}
++
++	
++		rtw_mfree((u8*)pcontext, sizeof(struct zero_bulkout_context));	
++	}	
++	
++
++}
++
++static u32 usb_bulkout_zero(struct intf_hdl *pintfhdl, u32 addr)
++{	
++	int pipe, status, len;
++	u32 ret;
++	unsigned char *pbuf;
++	struct zero_bulkout_context *pcontext;
++	PURB	purb = NULL;	
++	_adapter *padapter = (_adapter *)pintfhdl->padapter;
++	struct dvobj_priv *pdvobj = adapter_to_dvobj(padapter);	
++	struct usb_device *pusbd = pdvobj->pusbdev;
++
++	//DBG_871X("%s\n", __func__);
++	
++		
++	if((padapter->bDriverStopped) || (padapter->bSurpriseRemoved) ||(padapter->pwrctrlpriv.pnp_bstop_trx))
++	{		
++		return _FAIL;
++	}
++	
++
++	pcontext = (struct zero_bulkout_context *)rtw_zmalloc(sizeof(struct zero_bulkout_context));
++
++	pbuf = (unsigned char *)rtw_zmalloc(sizeof(int));	
++    	purb = usb_alloc_urb(0, GFP_ATOMIC);
++      	
++	len = 0;
++	pcontext->pbuf = pbuf;
++	pcontext->purb = purb;
++	pcontext->pirp = NULL;
++	pcontext->padapter = padapter;
++
++	
++	//translate DMA FIFO addr to pipehandle
++	//pipe = ffaddr2pipehdl(pdvobj, addr);	
++
++	usb_fill_bulk_urb(purb, pusbd, pipe, 
++       				pbuf,
++              			len,
++              			usb_bulkout_zero_complete,
++              			pcontext);//context is pcontext
++
++	status = usb_submit_urb(purb, GFP_ATOMIC);
++
++	if (!status)
++	{		
++		ret= _SUCCESS;
++	}
++	else
++	{
++		ret= _FAIL;
++	}
++	
++	
++	return _SUCCESS;
++
++}
++
++void usb_read_mem(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *rmem)
++{
++	
++}
++
++void usb_write_mem(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *wmem)
++{
++	
++}
++
++
++void usb_read_port_cancel(struct intf_hdl *pintfhdl)
++{
++	int i;	
++	struct recv_buf *precvbuf;	
++	_adapter	*padapter = pintfhdl->padapter;
++	precvbuf = (struct recv_buf *)padapter->recvpriv.precv_buf;
++
++	DBG_871X("%s\n", __func__);
++
++	padapter->bReadPortCancel = _TRUE;
++
++	for (i=0; i < NR_RECVBUFF ; i++) {
++		
++		precvbuf->reuse = _TRUE;	
++		if (precvbuf->purb)	 {
++			//DBG_8192C("usb_read_port_cancel : usb_kill_urb \n");
++			usb_kill_urb(precvbuf->purb);
++		}		
++		precvbuf++;
++	}
++
++#ifdef CONFIG_USB_INTERRUPT_IN_PIPE
++	usb_kill_urb(padapter->recvpriv.int_in_urb);
++#endif
++}
++
++static void usb_write_port_complete(struct urb *purb, struct pt_regs *regs)
++{
++	_irqL irqL;
++	int i;
++	struct xmit_buf *pxmitbuf = (struct xmit_buf *)purb->context;
++	//struct xmit_frame *pxmitframe = (struct xmit_frame *)pxmitbuf->priv_data;
++	//_adapter			*padapter = pxmitframe->padapter;
++	_adapter	*padapter = pxmitbuf->padapter;
++       struct xmit_priv	*pxmitpriv = &padapter->xmitpriv;		
++	//struct pkt_attrib *pattrib = &pxmitframe->attrib;
++	   
++_func_enter_;
++
++	switch(pxmitbuf->flags)
++	{
++		case VO_QUEUE_INX:
++			pxmitpriv->voq_cnt--;			
++			break;
++		case VI_QUEUE_INX:
++			pxmitpriv->viq_cnt--;		
++			break;
++		case BE_QUEUE_INX:
++			pxmitpriv->beq_cnt--;			
++			break;
++		case BK_QUEUE_INX:
++			pxmitpriv->bkq_cnt--;			
++			break;
++		case HIGH_QUEUE_INX:
++#ifdef CONFIG_AP_MODE			
++			rtw_chk_hi_queue_cmd(padapter);
++#endif
++			break;
++		default:			
++			break;
++	}
++		
++
++/*
++	_enter_critical(&pxmitpriv->lock, &irqL);
++
++	pxmitpriv->txirp_cnt--;
++	
++	switch(pattrib->priority) 
++	{
++		case 1:				
++		case 2:
++			pxmitpriv->bkq_cnt--;
++			//DBG_8192C("pxmitpriv->bkq_cnt=%d\n", pxmitpriv->bkq_cnt);
++			break;
++		case 4:
++		case 5:
++			pxmitpriv->viq_cnt--;
++			//DBG_8192C("pxmitpriv->viq_cnt=%d\n", pxmitpriv->viq_cnt);
++			break;
++		case 6:
++		case 7:
++			pxmitpriv->voq_cnt--;
++			//DBG_8192C("pxmitpriv->voq_cnt=%d\n", pxmitpriv->voq_cnt);
++			break;
++		case 0:
++		case 3:			
++		default:
++			pxmitpriv->beq_cnt--;
++			//DBG_8192C("pxmitpriv->beq_cnt=%d\n", pxmitpriv->beq_cnt);
++			break;
++			
++	}	
++	
++	_exit_critical(&pxmitpriv->lock, &irqL);
++	
++	
++	if(pxmitpriv->txirp_cnt==0)
++	{
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete: txirp_cnt== 0, set allrxreturnevt!\n"));		
++		_rtw_up_sema(&(pxmitpriv->tx_retevt));
++	}
++*/
++        //rtw_free_xmitframe(pxmitpriv, pxmitframe);
++	
++	if(padapter->bSurpriseRemoved || padapter->bDriverStopped ||padapter->bWritePortCancel)
++	{
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete:bDriverStopped(%d) OR bSurpriseRemoved(%d)", padapter->bDriverStopped, padapter->bSurpriseRemoved));
++		DBG_8192C("%s(): TX Warning! bDriverStopped(%d) OR bSurpriseRemoved(%d) bWritePortCancel(%d) pxmitbuf->ext_tag(%x) \n", 
++		__FUNCTION__,padapter->bDriverStopped, padapter->bSurpriseRemoved,padapter->bReadPortCancel,pxmitbuf->ext_tag);	
++
++		goto check_completion;
++	}
++
++
++	if (purb->status==0) {
++	
++	} else {
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete : purb->status(%d) != 0 \n", purb->status));
++		DBG_871X("###=> urb_write_port_complete status(%d)\n",purb->status);
++		if((purb->status==-EPIPE)||(purb->status==-EPROTO))
++		{
++			//usb_clear_halt(pusbdev, purb->pipe);	
++			//msleep(10);
++			sreset_set_wifi_error_status(padapter, USB_WRITE_PORT_FAIL);
++		} else if (purb->status == -EINPROGRESS) {
++			RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete: EINPROGESS\n"));
++			goto check_completion;
++
++		} else if (purb->status == -ENOENT) {
++			DBG_871X("%s: -ENOENT\n", __func__);
++			goto check_completion;
++			
++		} else if (purb->status == -ECONNRESET) {
++			DBG_871X("%s: -ECONNRESET\n", __func__);
++			goto check_completion;
++
++		} else if (purb->status == -ESHUTDOWN) {
++			RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete: ESHUTDOWN\n"));
++			padapter->bDriverStopped=_TRUE;
++			RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete:bDriverStopped=TRUE\n"));
++
++			goto check_completion;
++		}
++		else
++		{					
++			padapter->bSurpriseRemoved=_TRUE;
++			DBG_8192C("bSurpriseRemoved=TRUE\n");
++			//rtl8192cu_trigger_gpio_0(padapter);
++			RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete:bSurpriseRemoved=TRUE\n"));
++
++			goto check_completion;
++		}
++	}
++
++	#ifdef DBG_CONFIG_ERROR_DETECT
++	{	
++		HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++		pHalData->srestpriv.last_tx_complete_time = rtw_get_current_time();		
++	}
++	#endif
++
++check_completion:
++	_enter_critical(&pxmitpriv->lock_sctx, &irqL);
++	rtw_sctx_done_err(&pxmitbuf->sctx,
++		purb->status ? RTW_SCTX_DONE_WRITE_PORT_ERR : RTW_SCTX_DONE_SUCCESS);
++	_exit_critical(&pxmitpriv->lock_sctx, &irqL);
++
++	rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
++
++	//if(rtw_txframes_pending(padapter))	
++	{
++		tasklet_hi_schedule(&pxmitpriv->xmit_tasklet);
++	}
++	
++_func_exit_;	
++
++}
++
++u32 usb_write_port(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *wmem)
++{    
++	_irqL irqL;
++	unsigned int pipe;
++	int status;
++	u32 ret = _FAIL, bwritezero = _FALSE;
++	PURB	purb = NULL;
++	_adapter *padapter = (_adapter *)pintfhdl->padapter;
++	struct dvobj_priv	*pdvobj = adapter_to_dvobj(padapter);	
++	struct xmit_priv	*pxmitpriv = &padapter->xmitpriv;
++	struct xmit_buf *pxmitbuf = (struct xmit_buf *)wmem;
++	struct xmit_frame *pxmitframe = (struct xmit_frame *)pxmitbuf->priv_data;
++	struct usb_device *pusbd = pdvobj->pusbdev;
++	struct pkt_attrib *pattrib = &pxmitframe->attrib;
++	
++_func_enter_;	
++	
++	RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("+usb_write_port\n"));
++	
++	if ((padapter->bDriverStopped) || (padapter->bSurpriseRemoved) ||(padapter->pwrctrlpriv.pnp_bstop_trx)) {
++		#ifdef DBG_TX
++		DBG_871X(" DBG_TX %s:%d bDriverStopped%d, bSurpriseRemoved:%d, pnp_bstop_trx:%d\n",__FUNCTION__, __LINE__
++			,padapter->bDriverStopped, padapter->bSurpriseRemoved, padapter->pwrctrlpriv.pnp_bstop_trx );
++		#endif
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port:( padapter->bDriverStopped ||padapter->bSurpriseRemoved ||adapter->pwrctrlpriv.pnp_bstop_trx)!!!\n"));
++		rtw_sctx_done_err(&pxmitbuf->sctx, RTW_SCTX_DONE_TX_DENY);
++		goto exit;
++	}
++	
++	_enter_critical(&pxmitpriv->lock, &irqL);
++
++	switch(addr)
++	{
++		case VO_QUEUE_INX:
++			pxmitpriv->voq_cnt++;
++			pxmitbuf->flags = VO_QUEUE_INX;
++			break;
++		case VI_QUEUE_INX:
++			pxmitpriv->viq_cnt++;
++			pxmitbuf->flags = VI_QUEUE_INX;
++			break;
++		case BE_QUEUE_INX:
++			pxmitpriv->beq_cnt++;
++			pxmitbuf->flags = BE_QUEUE_INX;
++			break;
++		case BK_QUEUE_INX:
++			pxmitpriv->bkq_cnt++;
++			pxmitbuf->flags = BK_QUEUE_INX;
++			break;
++		case HIGH_QUEUE_INX:
++			pxmitbuf->flags = HIGH_QUEUE_INX;
++			break;
++		default:
++			pxmitbuf->flags = MGT_QUEUE_INX;
++			break;
++	}
++		
++	_exit_critical(&pxmitpriv->lock, &irqL);
++		
++	purb	= pxmitbuf->pxmit_urb[0];
++
++#if 0
++	if(pdvobj->ishighspeed)
++	{
++		if(cnt> 0 && cnt%512 == 0)
++		{
++			//DBG_8192C("ishighspeed, cnt=%d\n", cnt);
++			bwritezero = _TRUE;			
++		}	
++	}
++	else
++	{
++		if(cnt > 0 && cnt%64 == 0)
++		{
++			//DBG_8192C("cnt=%d\n", cnt);
++			bwritezero = _TRUE;			
++		}	
++	}
++#endif
++
++	//translate DMA FIFO addr to pipehandle
++	pipe = ffaddr2pipehdl(pdvobj, addr);	
++
++#ifdef CONFIG_REDUCE_USB_TX_INT	
++	if ( (pxmitpriv->free_xmitbuf_cnt%NR_XMITBUFF == 0)
++		|| (pxmitbuf->ext_tag == _TRUE) )
++	{
++		purb->transfer_flags  &=  (~URB_NO_INTERRUPT);
++	} else {
++		purb->transfer_flags  |=  URB_NO_INTERRUPT;
++		//DBG_8192C("URB_NO_INTERRUPT ");
++	}
++#endif
++
++
++	usb_fill_bulk_urb(purb, pusbd, pipe, 
++       				pxmitframe->buf_addr, //= pxmitbuf->pbuf
++              			cnt,
++              			usb_write_port_complete,
++              			pxmitbuf);//context is pxmitbuf
++              			
++#ifdef CONFIG_USE_USB_BUFFER_ALLOC_TX
++	purb->transfer_dma = pxmitbuf->dma_transfer_addr;
++	purb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
++	purb->transfer_flags |= URB_ZERO_PACKET;
++#endif	// CONFIG_USE_USB_BUFFER_ALLOC_TX
++              			
++#if 0
++	if (bwritezero)
++        {
++            purb->transfer_flags |= URB_ZERO_PACKET;           
++        }			
++#endif
++
++	status = usb_submit_urb(purb, GFP_ATOMIC);
++	if (!status) {
++		#ifdef DBG_CONFIG_ERROR_DETECT	
++		{	
++			HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
++			pHalData->srestpriv.last_tx_time = rtw_get_current_time();		
++		}
++		#endif
++	} else {
++		rtw_sctx_done_err(&pxmitbuf->sctx, RTW_SCTX_DONE_WRITE_PORT_ERR);
++		DBG_871X("usb_write_port, status=%d\n", status);
++		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port(): usb_submit_urb, status=%x\n", status));
++		
++		switch (status) {
++		case -ENODEV:
++			padapter->bDriverStopped=_TRUE;
++			break;
++		default:
++			break;
++		}
++		goto exit;
++	}
++
++	ret= _SUCCESS;
++
++//   Commented by Albert 2009/10/13
++//   We add the URB_ZERO_PACKET flag to urb so that the host will send the zero packet automatically.
++/*	
++	if(bwritezero == _TRUE)
++	{
++		usb_bulkout_zero(pintfhdl, addr);
++	}
++*/
++
++	RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("-usb_write_port\n"));
++
++exit:
++	if (ret != _SUCCESS)
++		rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
++_func_exit_;
++	return ret;
++
++}
++
++void usb_write_port_cancel(struct intf_hdl *pintfhdl)
++{
++	int i, j;
++	_adapter	*padapter = pintfhdl->padapter;
++	struct xmit_buf *pxmitbuf = (struct xmit_buf *)padapter->xmitpriv.pxmitbuf;
++
++	DBG_871X("%s \n", __func__);
++	
++	padapter->bWritePortCancel = _TRUE;	
++	
++	for (i=0; i<NR_XMITBUFF; i++) {
++		for (j=0; j<8; j++) {
++			if (pxmitbuf->pxmit_urb[j]) {
++				usb_kill_urb(pxmitbuf->pxmit_urb[j]);
++			}
++		}
++		pxmitbuf++;
++	}
++	
++	pxmitbuf = (struct xmit_buf*)padapter->xmitpriv.pxmit_extbuf;
++	for (i = 0; i < NR_XMIT_EXTBUFF; i++) {	
++		for (j=0; j<8; j++) {
++			if(pxmitbuf->pxmit_urb[j]) {
++				usb_kill_urb(pxmitbuf->pxmit_urb[j]);
++			}
++		}
++		pxmitbuf++;
++	}
++}
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/os_dep/linux/xmit_linux.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/os_dep/linux/xmit_linux.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/os_dep/linux/xmit_linux.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/os_dep/linux/xmit_linux.c	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,421 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++#define _XMIT_OSDEP_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++
++#include <if_ether.h>
++#include <ip.h>
++#include <rtw_byteorder.h>
++#include <wifi.h>
++#include <mlme_osdep.h>
++#include <xmit_osdep.h>
++#include <osdep_intf.h>
++#include <circ_buf.h>
++
++
++uint rtw_remainder_len(struct pkt_file *pfile)
++{
++	return (pfile->buf_len - ((SIZE_PTR)(pfile->cur_addr) - (SIZE_PTR)(pfile->buf_start)));
++}
++
++void _rtw_open_pktfile (_pkt *pktptr, struct pkt_file *pfile)
++{
++_func_enter_;
++
++	pfile->pkt = pktptr;
++	pfile->cur_addr = pfile->buf_start = pktptr->data;
++	pfile->pkt_len = pfile->buf_len = pktptr->len;
++
++	pfile->cur_buffer = pfile->buf_start ;
++	
++_func_exit_;
++}
++
++uint _rtw_pktfile_read (struct pkt_file *pfile, u8 *rmem, uint rlen)
++{	
++	uint	len = 0;
++	
++_func_enter_;
++
++       len =  rtw_remainder_len(pfile);
++      	len = (rlen > len)? len: rlen;
++
++       if(rmem)
++	  skb_copy_bits(pfile->pkt, pfile->buf_len-pfile->pkt_len, rmem, len);
++
++       pfile->cur_addr += len;
++       pfile->pkt_len -= len;
++	   
++_func_exit_;	       		
++
++	return len;	
++}
++
++sint rtw_endofpktfile(struct pkt_file *pfile)
++{
++_func_enter_;
++
++	if (pfile->pkt_len == 0) {
++_func_exit_;
++		return _TRUE;
++	}
++
++_func_exit_;
++
++	return _FALSE;
++}
++
++void rtw_set_tx_chksum_offload(_pkt *pkt, struct pkt_attrib *pattrib)
++{
++
++#ifdef CONFIG_TCP_CSUM_OFFLOAD_TX
++	struct sk_buff *skb = (struct sk_buff *)pkt;
++	pattrib->hw_tcp_csum = 0;
++	
++	if (skb->ip_summed == CHECKSUM_PARTIAL) {
++		if (skb_shinfo(skb)->nr_frags == 0)
++		{	
++                        const struct iphdr *ip = ip_hdr(skb);
++                        if (ip->protocol == IPPROTO_TCP) {
++                                // TCP checksum offload by HW
++                                DBG_871X("CHECKSUM_PARTIAL TCP\n");
++                                pattrib->hw_tcp_csum = 1;
++                                //skb_checksum_help(skb);
++                        } else if (ip->protocol == IPPROTO_UDP) {
++                                //DBG_871X("CHECKSUM_PARTIAL UDP\n");
++#if 1                       
++                                skb_checksum_help(skb);
++#else
++                                // Set UDP checksum = 0 to skip checksum check
++                                struct udphdr *udp = skb_transport_header(skb);
++                                udp->check = 0;
++#endif
++                        } else {
++				DBG_871X("%s-%d TCP CSUM offload Error!!\n", __FUNCTION__, __LINE__);
++                                WARN_ON(1);     /* we need a WARN() */
++			    }
++		}
++		else { // IP fragmentation case
++			DBG_871X("%s-%d nr_frags != 0, using skb_checksum_help(skb);!!\n", __FUNCTION__, __LINE__);
++                	skb_checksum_help(skb);
++		}		
++	}
++#endif	
++	
++}
++
++int rtw_os_xmit_resource_alloc(_adapter *padapter, struct xmit_buf *pxmitbuf,u32 alloc_sz)
++{
++#ifdef CONFIG_USB_HCI
++	int i;
++	struct dvobj_priv	*pdvobjpriv = adapter_to_dvobj(padapter);
++	struct usb_device	*pusbd = pdvobjpriv->pusbdev;
++
++#ifdef CONFIG_USE_USB_BUFFER_ALLOC_TX
++	pxmitbuf->pallocated_buf = rtw_usb_buffer_alloc(pusbd, (size_t)alloc_sz, &pxmitbuf->dma_transfer_addr);
++	pxmitbuf->pbuf = pxmitbuf->pallocated_buf;
++	if(pxmitbuf->pallocated_buf == NULL)
++		return _FAIL;
++#else // CONFIG_USE_USB_BUFFER_ALLOC_TX
++	
++	pxmitbuf->pallocated_buf = rtw_zmalloc(alloc_sz);
++	if (pxmitbuf->pallocated_buf == NULL)
++	{
++		return _FAIL;
++	}
++
++	pxmitbuf->pbuf = (u8 *)N_BYTE_ALIGMENT((SIZE_PTR)(pxmitbuf->pallocated_buf), XMITBUF_ALIGN_SZ);
++	pxmitbuf->dma_transfer_addr = 0;
++
++#endif // CONFIG_USE_USB_BUFFER_ALLOC_TX
++
++	for(i=0; i<8; i++)
++      	{
++      		pxmitbuf->pxmit_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
++             	if(pxmitbuf->pxmit_urb[i] == NULL) 
++             	{
++             		DBG_871X("pxmitbuf->pxmit_urb[i]==NULL");
++	        	return _FAIL;	 
++             	}      		  	
++	
++      	}
++#endif
++#if defined(CONFIG_PCI_HCI) || defined(CONFIG_SDIO_HCI)
++	pxmitbuf->pallocated_buf = rtw_zmalloc(alloc_sz);
++	if (pxmitbuf->pallocated_buf == NULL)
++	{
++		return _FAIL;
++	}
++
++	pxmitbuf->pbuf = (u8 *)N_BYTE_ALIGMENT((SIZE_PTR)(pxmitbuf->pallocated_buf), XMITBUF_ALIGN_SZ);
++#endif
++
++	return _SUCCESS;	
++}
++
++void rtw_os_xmit_resource_free(_adapter *padapter, struct xmit_buf *pxmitbuf,u32 free_sz)
++{
++#ifdef CONFIG_USB_HCI
++	int i;
++	struct dvobj_priv	*pdvobjpriv = adapter_to_dvobj(padapter);
++	struct usb_device	*pusbd = pdvobjpriv->pusbdev;
++
++
++	for(i=0; i<8; i++)
++	{
++		if(pxmitbuf->pxmit_urb[i])
++		{
++			//usb_kill_urb(pxmitbuf->pxmit_urb[i]);
++			usb_free_urb(pxmitbuf->pxmit_urb[i]);
++		}
++	}
++
++#ifdef CONFIG_USE_USB_BUFFER_ALLOC_TX
++	rtw_usb_buffer_free(pusbd, (size_t)free_sz, pxmitbuf->pallocated_buf, pxmitbuf->dma_transfer_addr);
++	pxmitbuf->pallocated_buf =  NULL;
++	pxmitbuf->dma_transfer_addr = 0;
++#else	// CONFIG_USE_USB_BUFFER_ALLOC_TX
++	if(pxmitbuf->pallocated_buf)
++		rtw_mfree(pxmitbuf->pallocated_buf, free_sz);
++#endif	// CONFIG_USE_USB_BUFFER_ALLOC_TX
++
++#endif
++#if defined(CONFIG_PCI_HCI) || defined(CONFIG_SDIO_HCI)
++	if(pxmitbuf->pallocated_buf)
++		rtw_mfree(pxmitbuf->pallocated_buf, free_sz);
++#endif
++}
++
++void rtw_os_pkt_complete(_adapter *padapter, _pkt *pkt)
++{
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,35))
++	u16	queue;
++	struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
++
++	queue = skb_get_queue_mapping(pkt);
++	if(__netif_subqueue_stopped(padapter->pnetdev, queue) &&
++		(pxmitpriv->hwxmits[queue].accnt < NR_XMITFRAME/2))
++	{
++		netif_wake_subqueue(padapter->pnetdev, queue);
++	}
++#else
++	if (netif_queue_stopped(padapter->pnetdev))
++		netif_wake_queue(padapter->pnetdev);
++#endif
++
++	rtw_skb_free(pkt);
++}
++
++void rtw_os_xmit_complete(_adapter *padapter, struct xmit_frame *pxframe)
++{
++	if(pxframe->pkt)
++		rtw_os_pkt_complete(padapter, pxframe->pkt);
++
++	pxframe->pkt = NULL;
++}
++
++void rtw_os_xmit_schedule(_adapter *padapter)
++{
++#ifdef CONFIG_SDIO_HCI
++	if(!padapter)
++		return;
++	
++	if (rtw_txframes_pending(padapter))
++		_rtw_up_sema(&padapter->xmitpriv.xmit_sema);
++#else
++	_irqL  irqL;
++	struct xmit_priv *pxmitpriv;
++
++	if(!padapter)
++		return;
++
++	pxmitpriv = &padapter->xmitpriv;
++
++	_enter_critical_bh(&pxmitpriv->lock, &irqL);
++
++	if(rtw_txframes_pending(padapter))	
++	{
++		tasklet_hi_schedule(&pxmitpriv->xmit_tasklet);
++	}
++
++	_exit_critical_bh(&pxmitpriv->lock, &irqL);
++#endif
++}
++
++
++
++#ifdef CONFIG_TX_MCAST2UNI
++int rtw_mlcst2unicst(_adapter *padapter, struct sk_buff *skb)
++{
++	struct	sta_priv *pstapriv = &padapter->stapriv;
++	struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
++	_irqL	irqL;
++	_list	*phead, *plist;
++	struct sk_buff *newskb;
++	struct sta_info *psta = NULL;
++	u8 chk_alive_num = 0;
++	char chk_alive_list[NUM_STA];
++	u8 bc_addr[6]={0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
++	u8 null_addr[6]={0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
++
++	int i;
++	s32	res;
++
++	_enter_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++	phead = &pstapriv->asoc_list;
++	plist = get_next(phead);
++	
++	//free sta asoc_queue
++	while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) {
++		int stainfo_offset;
++		psta = LIST_CONTAINOR(plist, struct sta_info, asoc_list);
++		plist = get_next(plist);
++
++		stainfo_offset = rtw_stainfo_offset(pstapriv, psta);
++		if (stainfo_offset_valid(stainfo_offset)) {
++			chk_alive_list[chk_alive_num++] = stainfo_offset;
++		}
++	}
++	_exit_critical_bh(&pstapriv->asoc_list_lock, &irqL);
++
++	for (i = 0; i < chk_alive_num; i++) {
++		psta = rtw_get_stainfo_by_offset(pstapriv, chk_alive_list[i]);
++
++		/* avoid come from STA1 and send back STA1 */ 
++		if (_rtw_memcmp(psta->hwaddr, &skb->data[6], 6) == _TRUE
++			|| _rtw_memcmp(psta->hwaddr, null_addr, 6) == _TRUE
++			|| _rtw_memcmp(psta->hwaddr, bc_addr, 6) == _TRUE
++		)
++			continue;
++
++		newskb = rtw_skb_copy(skb);
++
++		if (newskb) {
++			_rtw_memcpy(newskb->data, psta->hwaddr, 6);
++			res = rtw_xmit(padapter, &newskb);
++			if (res < 0) {
++				DBG_871X("%s()-%d: rtw_xmit() return error!\n", __FUNCTION__, __LINE__);
++				pxmitpriv->tx_drop++;
++				rtw_skb_free(newskb);
++			} else
++				pxmitpriv->tx_pkts++;
++		} else {
++			DBG_871X("%s-%d: rtw_skb_copy() failed!\n", __FUNCTION__, __LINE__);
++			pxmitpriv->tx_drop++;
++			//rtw_skb_free(skb);
++			return _FALSE;	// Caller shall tx this multicast frame via normal way.
++		}
++	}
++
++	rtw_skb_free(skb);
++	return _TRUE;
++}
++#endif	// CONFIG_TX_MCAST2UNI
++
++
++int _rtw_xmit_entry(_pkt *pkt, _nic_hdl pnetdev)
++{
++	_adapter *padapter = (_adapter *)rtw_netdev_priv(pnetdev);
++	struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
++#ifdef CONFIG_TX_MCAST2UNI
++	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
++	extern int rtw_mc2u_disable;
++#endif	// CONFIG_TX_MCAST2UNI	
++	s32 res = 0;
++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35))
++	u16 queue;
++#endif
++
++_func_enter_;
++
++	RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("+xmit_enry\n"));
++
++	if (rtw_if_up(padapter) == _FALSE) {
++		RT_TRACE(_module_xmit_osdep_c_, _drv_err_, ("rtw_xmit_entry: rtw_if_up fail\n"));
++		#ifdef DBG_TX_DROP_FRAME
++		DBG_871X("DBG_TX_DROP_FRAME %s if_up fail\n", __FUNCTION__);
++		#endif
++		goto drop_packet;
++	}
++
++#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35))
++	queue = skb_get_queue_mapping(pkt);
++	/* No free space for Tx, tx_worker is too slow */
++	if (pxmitpriv->hwxmits[queue].accnt > NR_XMITFRAME/2) {
++		//DBG_871X("%s(): stop netif_subqueue[%d]\n", __FUNCTION__, queue);
++		netif_stop_subqueue(padapter->pnetdev, queue);
++		return NETDEV_TX_BUSY;
++	}
++#endif
++
++#ifdef CONFIG_TX_MCAST2UNI
++	if ( !rtw_mc2u_disable
++		&& check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE
++		&& ( IP_MCAST_MAC(pkt->data)
++			|| ICMPV6_MCAST_MAC(pkt->data) )
++		&& (padapter->registrypriv.wifi_spec == 0)
++		)
++	{
++		if ( pxmitpriv->free_xmitframe_cnt > (NR_XMITFRAME/4) ) {
++			res = rtw_mlcst2unicst(padapter, pkt);
++			if (res == _TRUE) {
++				goto exit;
++			}
++		} else {
++			//DBG_871X("Stop M2U(%d, %d)! ", pxmitpriv->free_xmitframe_cnt, pxmitpriv->free_xmitbuf_cnt);
++			//DBG_871X("!m2u );
++		}
++	}	
++#endif	// CONFIG_TX_MCAST2UNI	
++
++	res = rtw_xmit(padapter, &pkt);
++	if (res < 0) {
++		#ifdef DBG_TX_DROP_FRAME
++		DBG_871X("DBG_TX_DROP_FRAME %s rtw_xmit fail\n", __FUNCTION__);
++		#endif
++		goto drop_packet;
++	}
++
++	pxmitpriv->tx_pkts++;
++	RT_TRACE(_module_xmit_osdep_c_, _drv_info_, ("rtw_xmit_entry: tx_pkts=%d\n", (u32)pxmitpriv->tx_pkts));
++	goto exit;
++
++drop_packet:
++	pxmitpriv->tx_drop++;
++	rtw_skb_free(pkt);
++	RT_TRACE(_module_xmit_osdep_c_, _drv_notice_, ("rtw_xmit_entry: drop, tx_drop=%d\n", (u32)pxmitpriv->tx_drop));
++
++exit:
++
++_func_exit_;
++
++	return 0;
++}
++
++int rtw_xmit_entry(_pkt *pkt, _nic_hdl pnetdev)
++{
++	if (pkt)
++		rtw_mstat_update(MSTAT_TYPE_SKB, MSTAT_ALLOC_SUCCESS, pkt->truesize);
++	return _rtw_xmit_entry(pkt, pnetdev);
++}
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/os_dep/osdep_service.c linux-raspberry-pi/drivers/net/wireless/rtl8192cu/os_dep/osdep_service.c
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/os_dep/osdep_service.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/os_dep/osdep_service.c	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,2300 @@
++/******************************************************************************
++ *
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *                                        
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
++ *
++ *
++ ******************************************************************************/
++
++
++#define _OSDEP_SERVICE_C_
++
++#include <drv_conf.h>
++#include <osdep_service.h>
++#include <drv_types.h>
++#include <recv_osdep.h>
++#ifdef PLATFORM_LINUX
++#include <linux/vmalloc.h>
++#endif
++#ifdef PLATFORM_FREEBSD
++#include <sys/malloc.h>
++#include <sys/time.h>
++#endif /* PLATFORM_FREEBSD */
++#ifdef RTK_DMP_PLATFORM
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,12))
++#include <linux/pageremap.h>
++#endif
++#endif
++
++#define RT_TAG	'1178'
++
++#ifdef DBG_MEMORY_LEAK
++#ifdef PLATFORM_LINUX
++#include <asm/atomic.h>
++atomic_t _malloc_cnt = ATOMIC_INIT(0);
++atomic_t _malloc_size = ATOMIC_INIT(0);
++#endif
++#endif /* DBG_MEMORY_LEAK */
++
++
++#if defined(PLATFORM_LINUX)
++/*
++* Translate the OS dependent @param error_code to OS independent RTW_STATUS_CODE
++* @return: one of RTW_STATUS_CODE
++*/
++inline int RTW_STATUS_CODE(int error_code){
++	if(error_code >=0)
++		return _SUCCESS;
++
++	switch(error_code) {
++		//case -ETIMEDOUT:
++		//	return RTW_STATUS_TIMEDOUT;
++		default:
++			return _FAIL;
++	}
++}
++#else
++inline int RTW_STATUS_CODE(int error_code){
++	return error_code;
++}
++#endif
++
++u32 rtw_atoi(u8* s)
++{
++
++	int num=0,flag=0;
++	int i;
++	for(i=0;i<=strlen(s);i++)
++	{
++	  if(s[i] >= '0' && s[i] <= '9')
++		 num = num * 10 + s[i] -'0';
++	  else if(s[0] == '-' && i==0) 
++		 flag =1;
++	  else 
++		  break;
++	 }
++
++	if(flag == 1)
++	   num = num * -1;
++
++	 return(num); 
++
++}
++
++inline u8* _rtw_vmalloc(u32 sz)
++{
++	u8 	*pbuf;
++#ifdef PLATFORM_LINUX	
++	pbuf = vmalloc(sz);
++#endif	
++#ifdef PLATFORM_FREEBSD
++	pbuf = malloc(sz,M_DEVBUF,M_NOWAIT);	
++#endif	
++	
++#ifdef PLATFORM_WINDOWS
++	NdisAllocateMemoryWithTag(&pbuf,sz, RT_TAG);	
++#endif
++
++#ifdef DBG_MEMORY_LEAK
++#ifdef PLATFORM_LINUX
++	if ( pbuf != NULL) {
++		atomic_inc(&_malloc_cnt);
++		atomic_add(sz, &_malloc_size);
++	}
++#endif
++#endif /* DBG_MEMORY_LEAK */
++
++	return pbuf;	
++}
++
++inline u8* _rtw_zvmalloc(u32 sz)
++{
++	u8 	*pbuf;
++#ifdef PLATFORM_LINUX
++	pbuf = _rtw_vmalloc(sz);
++	if (pbuf != NULL)
++		memset(pbuf, 0, sz);
++#endif	
++#ifdef PLATFORM_FREEBSD
++	pbuf = malloc(sz,M_DEVBUF,M_ZERO|M_NOWAIT);	
++#endif	
++#ifdef PLATFORM_WINDOWS
++	NdisAllocateMemoryWithTag(&pbuf,sz, RT_TAG);
++	if (pbuf != NULL)
++		NdisFillMemory(pbuf, sz, 0);
++#endif
++
++	return pbuf;	
++}
++
++inline void _rtw_vmfree(u8 *pbuf, u32 sz)
++{
++#ifdef	PLATFORM_LINUX
++	vfree(pbuf);
++#endif	
++#ifdef PLATFORM_FREEBSD
++	free(pbuf,M_DEVBUF);	
++#endif	
++#ifdef PLATFORM_WINDOWS
++	NdisFreeMemory(pbuf,sz, 0);
++#endif
++
++#ifdef DBG_MEMORY_LEAK
++#ifdef PLATFORM_LINUX
++	atomic_dec(&_malloc_cnt);
++	atomic_sub(sz, &_malloc_size);
++#endif
++#endif /* DBG_MEMORY_LEAK */
++}
++
++u8* _rtw_malloc(u32 sz)
++{
++
++	u8 	*pbuf=NULL;
++
++#ifdef PLATFORM_LINUX
++#ifdef RTK_DMP_PLATFORM
++	if(sz > 0x4000)
++		pbuf = (u8 *)dvr_malloc(sz);
++	else
++#endif		
++		pbuf = kmalloc(sz,in_interrupt() ? GFP_ATOMIC : GFP_KERNEL); 		
++
++#endif	
++#ifdef PLATFORM_FREEBSD
++	pbuf = malloc(sz,M_DEVBUF,M_NOWAIT);	
++#endif		
++#ifdef PLATFORM_WINDOWS
++
++	NdisAllocateMemoryWithTag(&pbuf,sz, RT_TAG);
++
++#endif
++
++#ifdef DBG_MEMORY_LEAK
++#ifdef PLATFORM_LINUX
++	if ( pbuf != NULL) {
++		atomic_inc(&_malloc_cnt);
++		atomic_add(sz, &_malloc_size);
++	}
++#endif
++#endif /* DBG_MEMORY_LEAK */
++
++	return pbuf;	
++	
++}
++
++
++u8* _rtw_zmalloc(u32 sz)
++{
++#ifdef PLATFORM_FREEBSD
++	return malloc(sz,M_DEVBUF,M_ZERO|M_NOWAIT);
++#else // PLATFORM_FREEBSD
++	u8 	*pbuf = _rtw_malloc(sz);
++
++	if (pbuf != NULL) {
++
++#ifdef PLATFORM_LINUX
++		memset(pbuf, 0, sz);
++#endif	
++	
++#ifdef PLATFORM_WINDOWS
++		NdisFillMemory(pbuf, sz, 0);
++#endif
++
++	}
++
++	return pbuf;	
++#endif // PLATFORM_FREEBSD
++}
++
++void	_rtw_mfree(u8 *pbuf, u32 sz)
++{
++
++#ifdef	PLATFORM_LINUX
++#ifdef RTK_DMP_PLATFORM
++	if(sz > 0x4000)
++		dvr_free(pbuf);
++	else
++#endif
++		kfree(pbuf);
++
++#endif	
++#ifdef PLATFORM_FREEBSD
++	free(pbuf,M_DEVBUF);	
++#endif		
++#ifdef PLATFORM_WINDOWS
++
++	NdisFreeMemory(pbuf,sz, 0);
++
++#endif
++	
++#ifdef DBG_MEMORY_LEAK
++#ifdef PLATFORM_LINUX
++	atomic_dec(&_malloc_cnt);
++	atomic_sub(sz, &_malloc_size);
++#endif
++#endif /* DBG_MEMORY_LEAK */
++	
++}
++
++#ifdef PLATFORM_FREEBSD
++//review again
++struct sk_buff * dev_alloc_skb(unsigned int size)
++{
++	struct sk_buff *skb=NULL;
++    	u8 *data=NULL;
++	
++	//skb = (struct sk_buff *)_rtw_zmalloc(sizeof(struct sk_buff)); // for skb->len, etc.
++	skb = (struct sk_buff *)_rtw_malloc(sizeof(struct sk_buff));
++	if(!skb)
++		goto out;
++	data = _rtw_malloc(size);
++	if(!data)
++		goto nodata;
++
++	skb->head = (unsigned char*)data;
++	skb->data = (unsigned char*)data;
++	skb->tail = (unsigned char*)data;
++	skb->end = (unsigned char*)data + size;
++	skb->len = 0;
++	//printf("%s()-%d: skb=%p, skb->head = %p\n", __FUNCTION__, __LINE__, skb, skb->head);
++
++out:
++	return skb;
++nodata:
++	_rtw_mfree((u8 *)skb, sizeof(struct sk_buff));
++	skb = NULL;
++goto out;
++	
++}
++
++void dev_kfree_skb_any(struct sk_buff *skb)
++{
++	//printf("%s()-%d: skb->head = %p\n", __FUNCTION__, __LINE__, skb->head);
++	if(skb->head)
++		_rtw_mfree(skb->head, 0);
++	//printf("%s()-%d: skb = %p\n", __FUNCTION__, __LINE__, skb);
++	if(skb)
++		_rtw_mfree((u8 *)skb, 0);
++}
++struct sk_buff *skb_clone(const struct sk_buff *skb)
++{
++	return NULL;
++}
++
++#endif /* PLATFORM_FREEBSD */
++
++inline struct sk_buff *_rtw_skb_alloc(u32 sz)
++{
++#ifdef PLATFORM_LINUX
++	return __dev_alloc_skb(sz, in_interrupt() ? GFP_ATOMIC : GFP_KERNEL);
++#endif /* PLATFORM_LINUX */
++
++#ifdef PLATFORM_FREEBSD
++	return dev_alloc_skb(sz);
++#endif /* PLATFORM_FREEBSD */
++}
++
++inline void _rtw_skb_free(struct sk_buff *skb)
++{
++	dev_kfree_skb_any(skb);
++}
++
++inline struct sk_buff *_rtw_skb_copy(const struct sk_buff *skb)
++{
++#ifdef PLATFORM_LINUX
++	return skb_copy(skb, in_interrupt() ? GFP_ATOMIC : GFP_KERNEL);
++#endif /* PLATFORM_LINUX */
++
++#ifdef PLATFORM_FREEBSD
++	return NULL;
++#endif /* PLATFORM_FREEBSD */
++}
++
++inline struct sk_buff *_rtw_skb_clone(struct sk_buff *skb)
++{
++#ifdef PLATFORM_LINUX
++	return skb_clone(skb, in_interrupt() ? GFP_ATOMIC : GFP_KERNEL);
++#endif /* PLATFORM_LINUX */
++
++#ifdef PLATFORM_FREEBSD
++	return skb_clone(skb);
++#endif /* PLATFORM_FREEBSD */
++}
++
++inline int _rtw_netif_rx(_nic_hdl ndev, struct sk_buff *skb)
++{
++#ifdef PLATFORM_LINUX
++	skb->dev = ndev;
++	return netif_rx(skb);
++#endif /* PLATFORM_LINUX */
++
++#ifdef PLATFORM_FREEBSD
++	return (*ndev->if_input)(ndev, skb);
++#endif /* PLATFORM_FREEBSD */
++}
++
++void _rtw_skb_queue_purge(struct sk_buff_head *list)
++{
++	struct sk_buff *skb;
++
++	while ((skb = skb_dequeue(list)) != NULL)
++		_rtw_skb_free(skb);
++}
++
++#ifdef CONFIG_USB_HCI
++inline void *_rtw_usb_buffer_alloc(struct usb_device *dev, size_t size, dma_addr_t *dma)
++{
++#ifdef PLATFORM_LINUX
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,35))
++	return usb_alloc_coherent(dev, size, (in_interrupt() ? GFP_ATOMIC : GFP_KERNEL), dma);
++#else
++	return usb_buffer_alloc(dev, size, (in_interrupt() ? GFP_ATOMIC : GFP_KERNEL), dma);
++#endif
++#endif /* PLATFORM_LINUX */
++	
++#ifdef PLATFORM_FREEBSD
++	return (malloc(size, M_USBDEV, M_NOWAIT | M_ZERO));
++#endif /* PLATFORM_FREEBSD */
++}
++inline void _rtw_usb_buffer_free(struct usb_device *dev, size_t size, void *addr, dma_addr_t dma)
++{
++#ifdef PLATFORM_LINUX
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,35))
++	usb_free_coherent(dev, size, addr, dma); 
++#else
++	usb_buffer_free(dev, size, addr, dma);
++#endif
++#endif /* PLATFORM_LINUX */
++
++#ifdef PLATFORM_FREEBSD
++	free(addr, M_USBDEV);
++#endif /* PLATFORM_FREEBSD */
++}
++#endif /* CONFIG_USB_HCI */
++
++#ifdef DBG_MEM_ALLOC
++
++struct rtw_mem_stat {
++	ATOMIC_T alloc; // the memory bytes we allocate currently
++	ATOMIC_T peak; // the peak memory bytes we allocate 
++	ATOMIC_T alloc_cnt; // the alloc count for alloc currently
++	ATOMIC_T alloc_err_cnt; // the error times we fail to allocate memory
++};
++
++struct rtw_mem_stat rtw_mem_type_stat[mstat_tf_idx(MSTAT_TYPE_MAX)];
++struct rtw_mem_stat rtw_mem_func_stat[mstat_ff_idx(MSTAT_FUNC_MAX)];
++
++char *MSTAT_TYPE_str[] = {
++	"VIR",
++	"PHY",
++	"SKB",
++	"USB",
++};
++
++char *MSTAT_FUNC_str[] = {
++	"UNSP",
++	"IO",
++	"TXIO",
++	"RXIO",
++	"TX",
++	"RX",
++};
++
++int _rtw_mstat_dump(char *buf, int len)
++{
++	int cnt = 0;
++	int i;
++	int value_t[4][mstat_tf_idx(MSTAT_TYPE_MAX)];
++	int value_f[4][mstat_ff_idx(MSTAT_FUNC_MAX)];
++	
++	int vir_alloc, vir_peak, vir_alloc_err, phy_alloc, phy_peak, phy_alloc_err;
++	int tx_alloc, tx_peak, tx_alloc_err, rx_alloc, rx_peak, rx_alloc_err;
++
++	for(i=0;i<mstat_tf_idx(MSTAT_TYPE_MAX);i++) {
++		value_t[0][i] = ATOMIC_READ(&(rtw_mem_type_stat[i].alloc));
++		value_t[1][i] = ATOMIC_READ(&(rtw_mem_type_stat[i].peak));
++		value_t[2][i] = ATOMIC_READ(&(rtw_mem_type_stat[i].alloc_cnt));
++		value_t[3][i] = ATOMIC_READ(&(rtw_mem_type_stat[i].alloc_err_cnt));
++	}
++
++	#if 0
++	for(i=0;i<mstat_ff_idx(MSTAT_FUNC_MAX);i++) {
++		value_f[0][i] = ATOMIC_READ(&(rtw_mem_func_stat[i].alloc));
++		value_f[1][i] = ATOMIC_READ(&(rtw_mem_func_stat[i].peak));
++		value_f[2][i] = ATOMIC_READ(&(rtw_mem_func_stat[i].alloc_cnt));
++		value_f[3][i] = ATOMIC_READ(&(rtw_mem_func_stat[i].alloc_err_cnt));
++	}
++	#endif
++
++	cnt += snprintf(buf+cnt, len-cnt, "===================== MSTAT =====================\n");
++	cnt += snprintf(buf+cnt, len-cnt, "%4s %10s %10s %10s %10s\n", "TAG", "alloc", "peak", "aloc_cnt", "err_cnt");
++	cnt += snprintf(buf+cnt, len-cnt, "-------------------------------------------------\n");
++	for(i=0;i<mstat_tf_idx(MSTAT_TYPE_MAX);i++) {
++		cnt += snprintf(buf+cnt, len-cnt, "%4s %10d %10d %10d %10d\n", MSTAT_TYPE_str[i], value_t[0][i], value_t[1][i], value_t[2][i], value_t[3][i]);
++	}
++	#if 0
++	cnt += snprintf(buf+cnt, len-cnt, "-------------------------------------------------\n");
++	for(i=0;i<mstat_ff_idx(MSTAT_FUNC_MAX);i++) {
++		cnt += snprintf(buf+cnt, len-cnt, "%4s %10d %10d %10d %10d\n", MSTAT_FUNC_str[i], value_f[0][i], value_f[1][i], value_f[2][i], value_f[3][i]);
++	}
++	#endif
++
++	return cnt;
++}
++
++void rtw_mstat_dump(void)
++{
++	char buf[768] = {0};
++
++	_rtw_mstat_dump(buf, 768);
++	DBG_871X("\n%s", buf);
++}
++
++void rtw_mstat_update(const enum mstat_f flags, const MSTAT_STATUS status, u32 sz)
++{
++	static u32 update_time = 0;
++	int peak, alloc;
++	int i;
++
++	/* initialization */
++	if(!update_time) {
++		for(i=0;i<mstat_tf_idx(MSTAT_TYPE_MAX);i++) {
++			ATOMIC_SET(&(rtw_mem_type_stat[i].alloc), 0);
++			ATOMIC_SET(&(rtw_mem_type_stat[i].peak), 0);
++			ATOMIC_SET(&(rtw_mem_type_stat[i].alloc_cnt), 0);
++			ATOMIC_SET(&(rtw_mem_type_stat[i].alloc_err_cnt), 0);
++		}
++		for(i=0;i<mstat_ff_idx(MSTAT_FUNC_MAX);i++) {
++			ATOMIC_SET(&(rtw_mem_func_stat[i].alloc), 0);
++			ATOMIC_SET(&(rtw_mem_func_stat[i].peak), 0);
++			ATOMIC_SET(&(rtw_mem_func_stat[i].alloc_cnt), 0);
++			ATOMIC_SET(&(rtw_mem_func_stat[i].alloc_err_cnt), 0);
++		}
++	}
++
++	switch(status) {
++		case MSTAT_ALLOC_SUCCESS:
++			ATOMIC_INC(&(rtw_mem_type_stat[mstat_tf_idx(flags)].alloc_cnt));
++			alloc = ATOMIC_ADD_RETURN(&(rtw_mem_type_stat[mstat_tf_idx(flags)].alloc), sz);
++			peak=ATOMIC_READ(&(rtw_mem_type_stat[mstat_tf_idx(flags)].peak));
++			if (peak<alloc)
++				ATOMIC_SET(&(rtw_mem_type_stat[mstat_tf_idx(flags)].peak), alloc);
++
++			ATOMIC_INC(&(rtw_mem_func_stat[mstat_ff_idx(flags)].alloc_cnt));
++			alloc = ATOMIC_ADD_RETURN(&(rtw_mem_func_stat[mstat_ff_idx(flags)].alloc), sz);
++			peak=ATOMIC_READ(&(rtw_mem_func_stat[mstat_ff_idx(flags)].peak));
++			if (peak<alloc)
++				ATOMIC_SET(&(rtw_mem_func_stat[mstat_ff_idx(flags)].peak), alloc);
++			break;
++
++		case MSTAT_ALLOC_FAIL:
++			ATOMIC_INC(&(rtw_mem_type_stat[mstat_tf_idx(flags)].alloc_err_cnt));
++
++			ATOMIC_INC(&(rtw_mem_func_stat[mstat_ff_idx(flags)].alloc_err_cnt));
++			break;
++
++		case MSTAT_FREE:
++			ATOMIC_DEC(&(rtw_mem_type_stat[mstat_tf_idx(flags)].alloc_cnt));
++			ATOMIC_SUB(&(rtw_mem_type_stat[mstat_tf_idx(flags)].alloc), sz);
++
++			ATOMIC_DEC(&(rtw_mem_func_stat[mstat_ff_idx(flags)].alloc_cnt));
++			ATOMIC_SUB(&(rtw_mem_func_stat[mstat_ff_idx(flags)].alloc), sz);
++			break;
++	};
++
++	//if (rtw_get_passing_time_ms(update_time) > 5000) {
++	//	rtw_mstat_dump();
++		update_time=rtw_get_current_time();
++	//}
++}
++
++
++
++inline u8* dbg_rtw_vmalloc(u32 sz, const enum mstat_f flags, const char *func, const int line)
++{
++	u8  *p;
++	//DBG_871X("DBG_MEM_ALLOC %s:%d %s(%d)\n", func,  line, __FUNCTION__, (sz));
++	
++	p=_rtw_vmalloc((sz));
++
++	rtw_mstat_update(
++		flags
++		, p ? MSTAT_ALLOC_SUCCESS : MSTAT_ALLOC_FAIL
++		, sz
++	);
++	
++	return p;
++}
++
++inline u8* dbg_rtw_zvmalloc(u32 sz, const enum mstat_f flags, const char *func, const int line)
++{
++	u8 *p;
++	//DBG_871X("DBG_MEM_ALLOC %s:%d %s(%d)\n", func, line, __FUNCTION__, (sz)); 
++	
++	p=_rtw_zvmalloc((sz)); 
++
++	rtw_mstat_update(
++		flags
++		, p ? MSTAT_ALLOC_SUCCESS : MSTAT_ALLOC_FAIL
++		, sz
++	);
++
++	return p;
++}
++
++inline void dbg_rtw_vmfree(u8 *pbuf, u32 sz, const enum mstat_f flags, const char *func, const int line)
++{
++	//DBG_871X("DBG_MEM_ALLOC %s:%d %s(%p,%d)\n",  func, line, __FUNCTION__, (pbuf), (sz));
++	
++	_rtw_vmfree((pbuf), (sz)); 
++
++	rtw_mstat_update(
++		flags
++		, MSTAT_FREE
++		, sz
++	);
++}
++
++inline u8* dbg_rtw_malloc(u32 sz, const enum mstat_f flags, const char *func, const int line) 
++{
++	u8 *p;
++
++	//if(sz>=153 && sz<=306) 
++	//	DBG_871X("DBG_MEM_ALLOC %s:%d %s(%d)\n", func, line, __FUNCTION__, (sz));
++
++	//if((sz)>4096) 
++	//	DBG_871X("DBG_MEM_ALLOC %s:%d %s(%d)\n", func, line, __FUNCTION__, (sz)); 
++
++	p=_rtw_malloc((sz));
++	
++	rtw_mstat_update(
++		flags
++		, p ? MSTAT_ALLOC_SUCCESS : MSTAT_ALLOC_FAIL
++		, sz
++	);
++
++	return p;
++}
++
++inline u8* dbg_rtw_zmalloc(u32 sz, const enum mstat_f flags, const char *func, const int line)
++{
++	u8 *p;
++
++	//if(sz>=153 && sz<=306) 
++	//	DBG_871X("DBG_MEM_ALLOC %s:%d %s(%d)\n", func, line, __FUNCTION__, (sz));
++
++	//if((sz)>4096)
++	//	DBG_871X("DBG_MEM_ALLOC %s:%d %s(%d)\n", func, line, __FUNCTION__, (sz));
++
++	p = _rtw_zmalloc((sz));
++
++	rtw_mstat_update(
++		flags
++		, p ? MSTAT_ALLOC_SUCCESS : MSTAT_ALLOC_FAIL
++		, sz
++	);
++
++	return p;
++}
++
++inline void dbg_rtw_mfree(u8 *pbuf, u32 sz, const enum mstat_f flags, const char *func, const int line)
++{
++	//if(sz>=153 && sz<=306) 
++	//	DBG_871X("DBG_MEM_ALLOC %s:%d %s(%d)\n", func, line, __FUNCTION__, (sz));
++
++	//if((sz)>4096)
++	//	DBG_871X("DBG_MEM_ALLOC %s:%d %s(%p,%d)\n", func, line, __FUNCTION__, (pbuf), (sz));
++	
++	_rtw_mfree((pbuf), (sz));
++
++	rtw_mstat_update(
++		flags
++		, MSTAT_FREE
++		, sz
++	);
++}
++
++inline struct sk_buff * dbg_rtw_skb_alloc(unsigned int size, const enum mstat_f flags, const char *func, int line)
++{
++	struct sk_buff *skb;
++	unsigned int truesize = 0;
++
++	skb = _rtw_skb_alloc(size);
++
++	if(skb)
++		truesize = skb->truesize;
++
++	if(!skb || truesize < size /*|| size > 4096*/)
++		DBG_871X("DBG_MEM_ALLOC %s:%d %s(%d), skb:%p, truesize=%u\n", func, line, __FUNCTION__, size, skb, truesize);
++
++	rtw_mstat_update(
++		flags
++		, skb ? MSTAT_ALLOC_SUCCESS : MSTAT_ALLOC_FAIL
++		, truesize
++	);
++
++	return skb;
++}
++
++inline void dbg_rtw_skb_free(struct sk_buff *skb, const enum mstat_f flags, const char *func, int line)
++{
++	unsigned int truesize = skb->truesize;
++
++	//if(truesize > 4096)
++	//	DBG_871X("DBG_MEM_ALLOC %s:%d %s, truesize=%u\n", func, line, __FUNCTION__, truesize);
++
++	_rtw_skb_free(skb);
++	
++	rtw_mstat_update(
++		flags
++		, MSTAT_FREE
++		, truesize
++	);
++}
++
++inline struct sk_buff *dbg_rtw_skb_copy(const struct sk_buff *skb, const enum mstat_f flags, const char *func, const int line)
++{
++	struct sk_buff *skb_cp;
++	unsigned int truesize = skb->truesize;
++	unsigned int cp_truesize = 0;
++	
++	skb_cp = _rtw_skb_copy(skb);
++	if(skb_cp)
++		cp_truesize = skb_cp->truesize;
++
++	if(!skb_cp || cp_truesize != truesize /*||cp_truesize > 4096*/)
++		DBG_871X("DBG_MEM_ALLOC %s:%d %s(%u), skb_cp:%p, cp_truesize=%u\n", func, line, __FUNCTION__, truesize, skb_cp, cp_truesize);
++
++	rtw_mstat_update(
++		flags
++		, skb_cp ? MSTAT_ALLOC_SUCCESS : MSTAT_ALLOC_FAIL
++		, truesize
++	);
++
++	return skb_cp;
++}
++
++inline struct sk_buff *dbg_rtw_skb_clone(struct sk_buff *skb, const enum mstat_f flags, const char *func, const int line)
++{
++	struct sk_buff *skb_cl;
++	unsigned int truesize = skb->truesize;
++	unsigned int cl_truesize = 0;
++
++	skb_cl = _rtw_skb_clone(skb);
++	if(skb_cl)
++		cl_truesize = skb_cl->truesize;
++
++	if(!skb_cl || cl_truesize != truesize /*|| cl_truesize > 4096*/)
++		DBG_871X("DBG_MEM_ALLOC %s:%d %s(%u), skb_cl:%p, cl_truesize=%u\n", func, line, __FUNCTION__, truesize, skb_cl, cl_truesize);
++
++	rtw_mstat_update(
++		flags
++		, skb_cl ? MSTAT_ALLOC_SUCCESS : MSTAT_ALLOC_FAIL
++		, truesize
++	);
++
++	return skb_cl;
++}
++
++inline int dbg_rtw_netif_rx(_nic_hdl ndev, struct sk_buff *skb, const enum mstat_f flags, const char *func, int line)
++{
++	int ret;
++	unsigned int truesize = skb->truesize;
++
++	//if(truesize > 4096)
++	//	DBG_871X("DBG_MEM_ALLOC %s:%d %s, truesize=%u\n", func, line, __FUNCTION__, truesize);
++
++	ret = _rtw_netif_rx(ndev, skb);
++	
++	rtw_mstat_update(
++		flags
++		, MSTAT_FREE
++		, truesize
++	);
++
++	return ret;
++}
++
++inline void dbg_rtw_skb_queue_purge(struct sk_buff_head *list, enum mstat_f flags, const char *func, int line)
++{
++	struct sk_buff *skb;
++
++	while ((skb = skb_dequeue(list)) != NULL)
++		dbg_rtw_skb_free(skb, flags, func, line);
++}
++
++#ifdef CONFIG_USB_HCI
++inline void *dbg_rtw_usb_buffer_alloc(struct usb_device *dev, size_t size, dma_addr_t *dma, const enum mstat_f flags, const char *func, int line)
++{
++	void *p;
++	//DBG_871X("DBG_MEM_ALLOC %s:%d %s(%d)\n", func, line, __FUNCTION__, size);
++	
++	p = _rtw_usb_buffer_alloc(dev, size, dma);
++	
++	rtw_mstat_update(
++		flags
++		, p ? MSTAT_ALLOC_SUCCESS : MSTAT_ALLOC_FAIL
++		, size
++	);
++
++	return p;
++}
++
++inline void dbg_rtw_usb_buffer_free(struct usb_device *dev, size_t size, void *addr, dma_addr_t dma, const enum mstat_f flags, const char *func, int line)
++{
++	//DBG_871X("DBG_MEM_ALLOC %s:%d %s(%d)\n", func, line, __FUNCTION__, size);
++
++	_rtw_usb_buffer_free(dev, size, addr, dma);
++
++	rtw_mstat_update(
++		flags
++		, MSTAT_FREE
++		, size
++	);
++}
++#endif /* CONFIG_USB_HCI */
++#endif /* DBG_MEM_ALLOC */
++
++void* rtw_malloc2d(int h, int w, int size)
++{
++	int j;
++
++	void **a = (void **) rtw_zmalloc( h*sizeof(void *) + h*w*size );
++	if(a == NULL)
++	{
++		DBG_871X("%s: alloc memory fail!\n", __FUNCTION__);
++		return NULL;
++	}
++
++	for( j=0; j<h; j++ )
++		a[j] = ((char *)(a+h)) + j*w*size;
++
++	return a;
++}
++
++void rtw_mfree2d(void *pbuf, int h, int w, int size)
++{
++	rtw_mfree((u8 *)pbuf, h*sizeof(void*) + w*h*size);
++}
++
++void _rtw_memcpy(void* dst, void* src, u32 sz)
++{
++
++#if defined (PLATFORM_LINUX)|| defined (PLATFORM_FREEBSD)
++
++	memcpy(dst, src, sz);
++
++#endif	
++
++#ifdef PLATFORM_WINDOWS
++
++	NdisMoveMemory(dst, src, sz);
++
++#endif
++
++}
++
++int	_rtw_memcmp(void *dst, void *src, u32 sz)
++{
++
++#if defined (PLATFORM_LINUX)|| defined (PLATFORM_FREEBSD)
++//under Linux/GNU/GLibc, the return value of memcmp for two same mem. chunk is 0
++
++	if (!(memcmp(dst, src, sz)))
++		return _TRUE;
++	else
++		return _FALSE;
++#endif
++
++
++#ifdef PLATFORM_WINDOWS
++//under Windows, the return value of NdisEqualMemory for two same mem. chunk is 1
++	
++	if (NdisEqualMemory (dst, src, sz))
++		return _TRUE;
++	else
++		return _FALSE;
++
++#endif	
++	
++	
++	
++}
++
++void _rtw_memset(void *pbuf, int c, u32 sz)
++{
++
++#if defined (PLATFORM_LINUX)|| defined (PLATFORM_FREEBSD)
++
++        memset(pbuf, c, sz);
++
++#endif
++
++#ifdef PLATFORM_WINDOWS
++#if 0
++	NdisZeroMemory(pbuf, sz);
++	if (c != 0) memset(pbuf, c, sz);
++#else
++	NdisFillMemory(pbuf, sz, c);
++#endif
++#endif
++
++}
++
++#ifdef PLATFORM_FREEBSD
++static inline void __list_add(_list *pnew, _list *pprev, _list *pnext)
++ {
++         pnext->prev = pnew;
++         pnew->next = pnext;
++         pnew->prev = pprev;
++         pprev->next = pnew;
++}
++#endif /* PLATFORM_FREEBSD */
++
++void _rtw_init_listhead(_list *list)
++{
++
++#ifdef PLATFORM_LINUX
++
++        INIT_LIST_HEAD(list);
++
++#endif
++
++#ifdef PLATFORM_FREEBSD
++         list->next = list;
++         list->prev = list;
++#endif
++#ifdef PLATFORM_WINDOWS
++
++        NdisInitializeListHead(list);
++
++#endif
++
++}
++
++
++/*
++For the following list_xxx operations, 
++caller must guarantee the atomic context.
++Otherwise, there will be racing condition.
++*/
++u32	rtw_is_list_empty(_list *phead)
++{
++
++#ifdef PLATFORM_LINUX
++
++	if (list_empty(phead))
++		return _TRUE;
++	else
++		return _FALSE;
++
++#endif
++#ifdef PLATFORM_FREEBSD
++
++	if (phead->next == phead)
++		return _TRUE;
++	else
++		return _FALSE;
++
++#endif
++
++
++#ifdef PLATFORM_WINDOWS
++
++	if (IsListEmpty(phead))
++		return _TRUE;
++	else
++		return _FALSE;
++
++#endif
++
++	
++}
++
++void rtw_list_insert_head(_list *plist, _list *phead)
++{
++
++#ifdef PLATFORM_LINUX
++	list_add(plist, phead);
++#endif
++
++#ifdef PLATFORM_FREEBSD
++	__list_add(plist, phead, phead->next);
++#endif
++
++#ifdef PLATFORM_WINDOWS
++	InsertHeadList(phead, plist);
++#endif
++}
++
++void rtw_list_insert_tail(_list *plist, _list *phead)
++{
++
++#ifdef PLATFORM_LINUX	
++	
++	list_add_tail(plist, phead);
++	
++#endif
++#ifdef PLATFORM_FREEBSD
++	
++	__list_add(plist, phead->prev, phead);
++	
++#endif	
++#ifdef PLATFORM_WINDOWS
++
++  InsertTailList(phead, plist);
++
++#endif		
++	
++}
++
++
++/*
++
++Caller must check if the list is empty before calling rtw_list_delete
++
++*/
++
++
++void _rtw_init_sema(_sema	*sema, int init_val)
++{
++
++#ifdef PLATFORM_LINUX
++
++	sema_init(sema, init_val);
++
++#endif
++#ifdef PLATFORM_FREEBSD
++	sema_init(sema, init_val, "rtw_drv");
++#endif
++#ifdef PLATFORM_OS_XP
++
++	KeInitializeSemaphore(sema, init_val,  SEMA_UPBND); // count=0;
++
++#endif
++	
++#ifdef PLATFORM_OS_CE
++	if(*sema == NULL)
++		*sema = CreateSemaphore(NULL, init_val, SEMA_UPBND, NULL);
++#endif
++
++}
++
++void _rtw_free_sema(_sema	*sema)
++{
++#ifdef PLATFORM_FREEBSD
++	sema_destroy(sema);
++#endif
++#ifdef PLATFORM_OS_CE
++	CloseHandle(*sema);
++#endif
++
++}
++
++void _rtw_up_sema(_sema	*sema)
++{
++
++#ifdef PLATFORM_LINUX
++
++	up(sema);
++
++#endif	
++#ifdef PLATFORM_FREEBSD
++	sema_post(sema);
++#endif
++#ifdef PLATFORM_OS_XP
++
++	KeReleaseSemaphore(sema, IO_NETWORK_INCREMENT, 1,  FALSE );
++
++#endif
++
++#ifdef PLATFORM_OS_CE
++	ReleaseSemaphore(*sema,  1,  NULL );
++#endif
++}
++
++u32 _rtw_down_sema(_sema *sema)
++{
++
++#ifdef PLATFORM_LINUX
++	
++	if (down_interruptible(sema))
++		return _FAIL;
++	else
++		return _SUCCESS;
++
++#endif    	
++#ifdef PLATFORM_FREEBSD
++	sema_wait(sema);
++	return  _SUCCESS;
++#endif
++#ifdef PLATFORM_OS_XP
++
++	if(STATUS_SUCCESS == KeWaitForSingleObject(sema, Executive, KernelMode, TRUE, NULL))
++		return  _SUCCESS;
++	else
++		return _FAIL;
++#endif
++
++#ifdef PLATFORM_OS_CE
++	if(WAIT_OBJECT_0 == WaitForSingleObject(*sema, INFINITE ))
++		return _SUCCESS; 
++	else
++		return _FAIL;
++#endif
++}
++
++
++
++void	_rtw_mutex_init(_mutex *pmutex)
++{
++#ifdef PLATFORM_LINUX
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37))
++	mutex_init(pmutex);
++#else
++	init_MUTEX(pmutex);
++#endif
++
++#endif
++#ifdef PLATFORM_FREEBSD
++	mtx_init(pmutex, "", NULL, MTX_DEF|MTX_RECURSE);
++#endif
++#ifdef PLATFORM_OS_XP
++
++	KeInitializeMutex(pmutex, 0);
++
++#endif
++
++#ifdef PLATFORM_OS_CE
++	*pmutex =  CreateMutex( NULL, _FALSE, NULL);
++#endif
++}
++
++void	_rtw_mutex_free(_mutex *pmutex);
++void	_rtw_mutex_free(_mutex *pmutex)
++{
++#ifdef PLATFORM_LINUX
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37))
++	mutex_destroy(pmutex);
++#else	
++#endif
++
++#ifdef PLATFORM_FREEBSD
++	sema_destroy(pmutex);
++#endif
++
++#endif
++
++#ifdef PLATFORM_OS_XP
++
++#endif
++
++#ifdef PLATFORM_OS_CE
++
++#endif
++}
++
++void	_rtw_spinlock_init(_lock *plock)
++{
++
++#ifdef PLATFORM_LINUX
++
++	spin_lock_init(plock);
++
++#endif	
++#ifdef PLATFORM_FREEBSD
++		mtx_init(plock, "", NULL, MTX_DEF|MTX_RECURSE);
++#endif
++#ifdef PLATFORM_WINDOWS
++
++	NdisAllocateSpinLock(plock);
++
++#endif
++	
++}
++
++void	_rtw_spinlock_free(_lock *plock)
++{
++#ifdef PLATFORM_FREEBSD
++	 mtx_destroy(plock);
++#endif
++	
++#ifdef PLATFORM_WINDOWS
++
++	NdisFreeSpinLock(plock);
++
++#endif
++	
++}
++#ifdef PLATFORM_FREEBSD
++extern PADAPTER prtw_lock;
++
++void rtw_mtx_lock(_lock *plock){
++	if(prtw_lock){
++		mtx_lock(&prtw_lock->glock);
++	}
++	else{
++		printf("%s prtw_lock==NULL",__FUNCTION__);
++	}
++}
++void rtw_mtx_unlock(_lock *plock){
++	if(prtw_lock){
++		mtx_unlock(&prtw_lock->glock);
++	}
++	else{
++		printf("%s prtw_lock==NULL",__FUNCTION__);
++	}
++	
++}
++#endif //PLATFORM_FREEBSD
++
++
++void	_rtw_spinlock(_lock	*plock)
++{
++
++#ifdef PLATFORM_LINUX
++
++	spin_lock(plock);
++
++#endif
++#ifdef PLATFORM_FREEBSD
++	mtx_lock(plock);
++#endif
++#ifdef PLATFORM_WINDOWS
++
++	NdisAcquireSpinLock(plock);
++
++#endif
++	
++}
++
++void	_rtw_spinunlock(_lock *plock)
++{
++
++#ifdef PLATFORM_LINUX
++
++	spin_unlock(plock);
++
++#endif
++#ifdef PLATFORM_FREEBSD
++	mtx_unlock(plock);
++#endif	
++#ifdef PLATFORM_WINDOWS
++
++	NdisReleaseSpinLock(plock);
++
++#endif
++}
++
++
++void	_rtw_spinlock_ex(_lock	*plock)
++{
++
++#ifdef PLATFORM_LINUX
++
++	spin_lock(plock);
++
++#endif
++#ifdef PLATFORM_FREEBSD
++	mtx_lock(plock);
++#endif	
++#ifdef PLATFORM_WINDOWS
++
++	NdisDprAcquireSpinLock(plock);
++
++#endif
++	
++}
++
++void	_rtw_spinunlock_ex(_lock *plock)
++{
++
++#ifdef PLATFORM_LINUX
++
++	spin_unlock(plock);
++
++#endif
++#ifdef PLATFORM_FREEBSD
++	mtx_unlock(plock);
++#endif	
++#ifdef PLATFORM_WINDOWS
++
++	NdisDprReleaseSpinLock(plock);
++
++#endif
++}
++
++
++
++void	_rtw_init_queue(_queue	*pqueue)
++{
++
++	_rtw_init_listhead(&(pqueue->queue));
++
++	_rtw_spinlock_init(&(pqueue->lock));
++
++}
++
++u32	  _rtw_queue_empty(_queue	*pqueue)
++{
++	return (rtw_is_list_empty(&(pqueue->queue)));
++}
++
++
++u32 rtw_end_of_queue_search(_list *head, _list *plist)
++{
++	if (head == plist)
++		return _TRUE;
++	else
++		return _FALSE;
++}
++
++
++u32	rtw_get_current_time(void)
++{
++	
++#ifdef PLATFORM_LINUX
++	return jiffies;
++#endif	
++#ifdef PLATFORM_FREEBSD
++	struct timeval tvp;
++	getmicrotime(&tvp);
++	return tvp.tv_sec;
++#endif
++#ifdef PLATFORM_WINDOWS
++	LARGE_INTEGER	SystemTime;
++	NdisGetCurrentSystemTime(&SystemTime);
++	return (u32)(SystemTime.LowPart);// count of 100-nanosecond intervals 
++#endif
++}
++
++inline u32 rtw_systime_to_ms(u32 systime)
++{
++#ifdef PLATFORM_LINUX
++	return systime * 1000 / HZ;
++#endif	
++#ifdef PLATFORM_FREEBSD
++	return systime * 1000;
++#endif	
++#ifdef PLATFORM_WINDOWS
++	return systime / 10000 ; 
++#endif
++}
++
++inline u32 rtw_ms_to_systime(u32 ms)
++{
++#ifdef PLATFORM_LINUX
++	return ms * HZ / 1000;
++#endif	
++#ifdef PLATFORM_FREEBSD
++	return ms /1000;
++#endif	
++#ifdef PLATFORM_WINDOWS
++	return ms * 10000 ; 
++#endif
++}
++
++// the input parameter start use the same unit as returned by rtw_get_current_time
++inline s32 rtw_get_passing_time_ms(u32 start)
++{
++#ifdef PLATFORM_LINUX
++	return rtw_systime_to_ms(jiffies-start);
++#endif
++#ifdef PLATFORM_FREEBSD
++	return rtw_systime_to_ms(rtw_get_current_time());
++#endif	
++#ifdef PLATFORM_WINDOWS
++	LARGE_INTEGER	SystemTime;
++	NdisGetCurrentSystemTime(&SystemTime);
++	return rtw_systime_to_ms((u32)(SystemTime.LowPart) - start) ;
++#endif
++}
++
++inline s32 rtw_get_time_interval_ms(u32 start, u32 end)
++{
++#ifdef PLATFORM_LINUX
++	return rtw_systime_to_ms(end-start);
++#endif
++#ifdef PLATFORM_FREEBSD
++	return rtw_systime_to_ms(rtw_get_current_time());
++#endif	
++#ifdef PLATFORM_WINDOWS
++	return rtw_systime_to_ms(end-start);
++#endif
++}
++	
++
++void rtw_sleep_schedulable(int ms)	
++{
++
++#ifdef PLATFORM_LINUX
++
++    u32 delta;
++    
++    delta = (ms * HZ)/1000;//(ms)
++    if (delta == 0) {
++        delta = 1;// 1 ms
++    }
++    set_current_state(TASK_INTERRUPTIBLE);
++    if (schedule_timeout(delta) != 0) {
++        return ;
++    }
++    return;
++
++#endif	
++#ifdef PLATFORM_FREEBSD
++	DELAY(ms*1000);
++	return ;
++#endif	
++	
++#ifdef PLATFORM_WINDOWS
++
++	NdisMSleep(ms*1000); //(us)*1000=(ms)
++
++#endif
++
++}
++
++
++void rtw_msleep_os(int ms)
++{
++
++#ifdef PLATFORM_LINUX
++
++  	msleep((unsigned int)ms);
++
++#endif	
++#ifdef PLATFORM_FREEBSD
++       //Delay for delay microseconds 
++	DELAY(ms*1000);
++	return ;
++#endif	
++#ifdef PLATFORM_WINDOWS
++
++	NdisMSleep(ms*1000); //(us)*1000=(ms)
++
++#endif
++
++
++}
++void rtw_usleep_os(int us)
++{
++
++#ifdef PLATFORM_LINUX
++  	
++      // msleep((unsigned int)us);
++      if ( 1 < (us/1000) )
++                msleep(1);
++      else
++		msleep( (us/1000) + 1);
++
++#endif	
++#ifdef PLATFORM_FREEBSD
++	//Delay for delay microseconds 
++	DELAY(us);
++
++	return ;
++#endif	
++#ifdef PLATFORM_WINDOWS
++
++	NdisMSleep(us); //(us)
++
++#endif
++
++
++}
++
++
++#ifdef DBG_DELAY_OS
++void _rtw_mdelay_os(int ms, const char *func, const int line)
++{
++	#if 0
++	if(ms>10)
++		DBG_871X("%s:%d %s(%d)\n", func, line, __FUNCTION__, ms);
++		rtw_msleep_os(ms);
++	return;
++	#endif
++
++
++	DBG_871X("%s:%d %s(%d)\n", func, line, __FUNCTION__, ms);
++
++#if defined(PLATFORM_LINUX)
++
++   	mdelay((unsigned long)ms); 
++
++#elif defined(PLATFORM_WINDOWS)
++
++	NdisStallExecution(ms*1000); //(us)*1000=(ms)
++
++#endif
++
++
++}
++void _rtw_udelay_os(int us, const char *func, const int line)
++{
++
++	#if 0
++	if(us > 1000) {
++	DBG_871X("%s:%d %s(%d)\n", func, line, __FUNCTION__, us);
++		rtw_usleep_os(us);
++		return;
++	}
++	#endif 
++
++
++	DBG_871X("%s:%d %s(%d)\n", func, line, __FUNCTION__, us);
++	
++	
++#if defined(PLATFORM_LINUX)
++
++      udelay((unsigned long)us); 
++
++#elif defined(PLATFORM_WINDOWS)
++
++	NdisStallExecution(us); //(us)
++
++#endif
++
++}
++#else
++void rtw_mdelay_os(int ms)
++{
++
++#ifdef PLATFORM_LINUX
++
++   	mdelay((unsigned long)ms); 
++
++#endif	
++#ifdef PLATFORM_FREEBSD
++	DELAY(ms*1000);
++	return ;
++#endif	
++#ifdef PLATFORM_WINDOWS
++
++	NdisStallExecution(ms*1000); //(us)*1000=(ms)
++
++#endif
++
++
++}
++void rtw_udelay_os(int us)
++{
++
++#ifdef PLATFORM_LINUX
++
++      udelay((unsigned long)us); 
++
++#endif	
++#ifdef PLATFORM_FREEBSD
++	//Delay for delay microseconds 
++	DELAY(us);
++	return ;
++#endif		
++#ifdef PLATFORM_WINDOWS
++
++	NdisStallExecution(us); //(us)
++
++#endif
++
++}
++#endif
++
++void rtw_yield_os()
++{
++#ifdef PLATFORM_LINUX
++	yield();
++#endif
++#ifdef PLATFORM_FREEBSD
++	yield();
++#endif
++#ifdef PLATFORM_WINDOWS
++	SwitchToThread();
++#endif
++}
++
++#define RTW_SUSPEND_LOCK_NAME "rtw_wifi"
++
++#ifdef CONFIG_WAKELOCK
++static struct wake_lock rtw_suspend_lock;
++#elif defined(CONFIG_ANDROID_POWER)
++static android_suspend_lock_t rtw_suspend_lock ={
++	.name = RTW_SUSPEND_LOCK_NAME
++};
++#endif
++
++inline void rtw_suspend_lock_init()
++{
++	#ifdef CONFIG_WAKELOCK
++	wake_lock_init(&rtw_suspend_lock, WAKE_LOCK_SUSPEND, RTW_SUSPEND_LOCK_NAME);
++	#elif defined(CONFIG_ANDROID_POWER)
++	android_init_suspend_lock(&rtw_suspend_lock);
++	#endif
++}
++
++inline void rtw_suspend_lock_uninit()
++{
++	#ifdef CONFIG_WAKELOCK
++	wake_lock_destroy(&rtw_suspend_lock);
++	#elif defined(CONFIG_ANDROID_POWER)
++	android_uninit_suspend_lock(&rtw_suspend_lock);
++	#endif
++}
++
++inline void rtw_lock_suspend()
++{
++	#ifdef CONFIG_WAKELOCK
++	wake_lock(&rtw_suspend_lock);
++	#elif defined(CONFIG_ANDROID_POWER)
++	android_lock_suspend(&rtw_suspend_lock);
++	#endif
++}
++
++inline void rtw_unlock_suspend()
++{
++	#ifdef CONFIG_WAKELOCK
++	wake_unlock(&rtw_suspend_lock);
++	#elif defined(CONFIG_ANDROID_POWER)
++	android_unlock_suspend(&rtw_suspend_lock);
++	#endif
++}
++
++inline void rtw_lock_suspend_timeout(u32 timeout_ms)
++{
++	#ifdef CONFIG_WAKELOCK
++	wake_lock_timeout(&rtw_suspend_lock, rtw_ms_to_systime(timeout_ms));
++	#elif defined(CONFIG_ANDROID_POWER)
++	android_lock_suspend_auto_expire(&rtw_suspend_lock, rtw_ms_to_systime(timeout_ms));
++	#endif
++}
++
++inline void ATOMIC_SET(ATOMIC_T *v, int i)
++{
++	#ifdef PLATFORM_LINUX
++	atomic_set(v,i);
++	#elif defined(PLATFORM_WINDOWS)
++	*v=i;// other choice????
++	#elif defined(PLATFORM_FREEBSD)
++	atomic_set_int(v,i);
++	#endif
++}
++
++inline int ATOMIC_READ(ATOMIC_T *v)
++{
++	#ifdef PLATFORM_LINUX
++	return atomic_read(v);
++	#elif defined(PLATFORM_WINDOWS)
++	return *v; // other choice????
++	#elif defined(PLATFORM_FREEBSD)
++	return atomic_load_acq_32(v);
++	#endif
++}
++
++inline void ATOMIC_ADD(ATOMIC_T *v, int i)
++{
++	#ifdef PLATFORM_LINUX
++	atomic_add(i,v);
++	#elif defined(PLATFORM_WINDOWS)
++	InterlockedAdd(v,i);
++	#elif defined(PLATFORM_FREEBSD)
++	atomic_add_int(v,i);
++	#endif
++}
++inline void ATOMIC_SUB(ATOMIC_T *v, int i)
++{
++	#ifdef PLATFORM_LINUX
++	atomic_sub(i,v);
++	#elif defined(PLATFORM_WINDOWS)
++	InterlockedAdd(v,-i);
++	#elif defined(PLATFORM_FREEBSD)
++	atomic_subtract_int(v,i);
++	#endif
++}
++
++inline void ATOMIC_INC(ATOMIC_T *v)
++{
++	#ifdef PLATFORM_LINUX
++	atomic_inc(v);
++	#elif defined(PLATFORM_WINDOWS)
++	InterlockedIncrement(v);
++	#elif defined(PLATFORM_FREEBSD)
++	atomic_add_int(v,1);
++	#endif
++}
++
++inline void ATOMIC_DEC(ATOMIC_T *v)
++{
++	#ifdef PLATFORM_LINUX
++	atomic_dec(v);
++	#elif defined(PLATFORM_WINDOWS)
++	InterlockedDecrement(v);
++	#elif defined(PLATFORM_FREEBSD)
++	atomic_subtract_int(v,1);
++	#endif
++}
++
++inline int ATOMIC_ADD_RETURN(ATOMIC_T *v, int i)
++{
++	#ifdef PLATFORM_LINUX
++	return atomic_add_return(i,v);
++	#elif defined(PLATFORM_WINDOWS)
++	return InterlockedAdd(v,i);
++	#elif defined(PLATFORM_FREEBSD)
++	atomic_add_int(v,i);
++	return atomic_load_acq_32(v);
++	#endif
++}
++
++inline int ATOMIC_SUB_RETURN(ATOMIC_T *v, int i)
++{
++	#ifdef PLATFORM_LINUX
++	return atomic_sub_return(i,v);
++	#elif defined(PLATFORM_WINDOWS)
++	return InterlockedAdd(v,-i);
++	#elif defined(PLATFORM_FREEBSD)
++	atomic_subtract_int(v,i);
++	return atomic_load_acq_32(v);
++	#endif
++}
++
++inline int ATOMIC_INC_RETURN(ATOMIC_T *v)
++{
++	#ifdef PLATFORM_LINUX
++	return atomic_inc_return(v);
++	#elif defined(PLATFORM_WINDOWS)
++	return InterlockedIncrement(v);
++	#elif defined(PLATFORM_FREEBSD)
++	atomic_add_int(v,1);
++	return atomic_load_acq_32(v);
++	#endif
++}
++
++inline int ATOMIC_DEC_RETURN(ATOMIC_T *v)
++{
++	#ifdef PLATFORM_LINUX
++	return atomic_dec_return(v);
++	#elif defined(PLATFORM_WINDOWS)
++	return InterlockedDecrement(v);
++	#elif defined(PLATFORM_FREEBSD)
++	atomic_subtract_int(v,1);
++	return atomic_load_acq_32(v);
++	#endif
++}
++
++
++#ifdef PLATFORM_LINUX
++/*
++* Open a file with the specific @param path, @param flag, @param mode
++* @param fpp the pointer of struct file pointer to get struct file pointer while file opening is success
++* @param path the path of the file to open
++* @param flag file operation flags, please refer to linux document
++* @param mode please refer to linux document
++* @return Linux specific error code
++*/
++static int openFile(struct file **fpp, char *path, int flag, int mode) 
++{ 
++	struct file *fp; 
++ 
++	fp=filp_open(path, flag, mode); 
++	if(IS_ERR(fp)) {
++		*fpp=NULL;
++		return PTR_ERR(fp);
++	}
++	else {
++		*fpp=fp; 
++		return 0;
++	}	
++}
++
++/*
++* Close the file with the specific @param fp
++* @param fp the pointer of struct file to close
++* @return always 0
++*/
++static int closeFile(struct file *fp) 
++{ 
++	filp_close(fp,NULL);
++	return 0; 
++}
++
++static int readFile(struct file *fp,char *buf,int len) 
++{ 
++	int rlen=0, sum=0;
++	
++	if (!fp->f_op || !fp->f_op->read) 
++		return -EPERM;
++
++	while(sum<len) {
++		rlen=fp->f_op->read(fp,buf+sum,len-sum, &fp->f_pos);
++		if(rlen>0)
++			sum+=rlen;
++		else if(0 != rlen)
++			return rlen;
++		else
++			break;
++	}
++	
++	return  sum;
++
++}
++
++static int writeFile(struct file *fp,char *buf,int len) 
++{ 
++	int wlen=0, sum=0;
++	
++	if (!fp->f_op || !fp->f_op->write) 
++		return -EPERM; 
++
++	while(sum<len) {
++		wlen=fp->f_op->write(fp,buf+sum,len-sum, &fp->f_pos);
++		if(wlen>0)
++			sum+=wlen;
++		else if(0 != wlen)
++			return wlen;
++		else
++			break;
++	}
++
++	return sum;
++
++}
++
++/*
++* Test if the specifi @param path is a file and readable
++* @param path the path of the file to test
++* @return Linux specific error code
++*/
++static int isFileReadable(char *path)
++{ 
++	struct file *fp;
++	int ret = 0;
++	mm_segment_t oldfs;
++	char buf;
++ 
++	fp=filp_open(path, O_RDONLY, 0); 
++	if(IS_ERR(fp)) {
++		ret = PTR_ERR(fp);
++	}
++	else {
++		oldfs = get_fs(); set_fs(get_ds());
++		
++		if(1!=readFile(fp, &buf, 1))
++			ret = PTR_ERR(fp);
++		
++		set_fs(oldfs);
++		filp_close(fp,NULL);
++	}	
++	return ret;
++}
++
++/*
++* Open the file with @param path and retrive the file content into memory starting from @param buf for @param sz at most
++* @param path the path of the file to open and read
++* @param buf the starting address of the buffer to store file content
++* @param sz how many bytes to read at most
++* @return the byte we've read, or Linux specific error code
++*/
++static int retriveFromFile(char *path, u8* buf, u32 sz)
++{
++	int ret =-1;
++	mm_segment_t oldfs;
++	struct file *fp;
++
++	if(path && buf) {
++		if( 0 == (ret=openFile(&fp,path, O_RDONLY, 0)) ){
++			DBG_871X("%s openFile path:%s fp=%p\n",__FUNCTION__, path ,fp);
++
++			oldfs = get_fs(); set_fs(get_ds());
++			ret=readFile(fp, buf, sz);
++			set_fs(oldfs);
++			closeFile(fp);
++			
++			DBG_871X("%s readFile, ret:%d\n",__FUNCTION__, ret);
++			
++		} else {
++			DBG_871X("%s openFile path:%s Fail, ret:%d\n",__FUNCTION__, path, ret);
++		}
++	} else {
++		DBG_871X("%s NULL pointer\n",__FUNCTION__);
++		ret =  -EINVAL;
++	}
++	return ret;
++}
++
++/*
++* Open the file with @param path and wirte @param sz byte of data starting from @param buf into the file
++* @param path the path of the file to open and write
++* @param buf the starting address of the data to write into file
++* @param sz how many bytes to write at most
++* @return the byte we've written, or Linux specific error code
++*/
++static int storeToFile(char *path, u8* buf, u32 sz)
++{
++	int ret =0;
++	mm_segment_t oldfs;
++	struct file *fp;
++	
++	if(path && buf) {
++		if( 0 == (ret=openFile(&fp, path, O_CREAT|O_WRONLY, 0666)) ) {
++			DBG_871X("%s openFile path:%s fp=%p\n",__FUNCTION__, path ,fp);
++
++			oldfs = get_fs(); set_fs(get_ds());
++			ret=writeFile(fp, buf, sz);
++			set_fs(oldfs);
++			closeFile(fp);
++
++			DBG_871X("%s writeFile, ret:%d\n",__FUNCTION__, ret);
++			
++		} else {
++			DBG_871X("%s openFile path:%s Fail, ret:%d\n",__FUNCTION__, path, ret);
++		}	
++	} else {
++		DBG_871X("%s NULL pointer\n",__FUNCTION__);
++		ret =  -EINVAL;
++	}
++	return ret;
++}
++#endif //PLATFORM_LINUX
++
++/*
++* Test if the specifi @param path is a file and readable
++* @param path the path of the file to test
++* @return _TRUE or _FALSE
++*/
++int rtw_is_file_readable(char *path)
++{
++#ifdef PLATFORM_LINUX
++	if(isFileReadable(path) == 0)
++		return _TRUE;
++	else
++		return _FALSE;
++#else
++	//Todo...
++	return _FALSE;
++#endif
++}
++
++/*
++* Open the file with @param path and retrive the file content into memory starting from @param buf for @param sz at most
++* @param path the path of the file to open and read
++* @param buf the starting address of the buffer to store file content
++* @param sz how many bytes to read at most
++* @return the byte we've read
++*/
++int rtw_retrive_from_file(char *path, u8* buf, u32 sz)
++{
++#ifdef PLATFORM_LINUX
++	int ret =retriveFromFile(path, buf, sz);
++	return ret>=0?ret:0;
++#else
++	//Todo...
++	return 0;
++#endif
++}
++
++/*
++* Open the file with @param path and wirte @param sz byte of data starting from @param buf into the file
++* @param path the path of the file to open and write
++* @param buf the starting address of the data to write into file
++* @param sz how many bytes to write at most
++* @return the byte we've written
++*/
++int rtw_store_to_file(char *path, u8* buf, u32 sz)
++{
++#ifdef PLATFORM_LINUX
++	int ret =storeToFile(path, buf, sz);
++	return ret>=0?ret:0;
++#else
++	//Todo...
++	return 0;
++#endif
++}
++
++#if 1 //#ifdef MEM_ALLOC_REFINE_ADAPTOR
++#ifdef PLATFORM_LINUX
++struct net_device *rtw_alloc_etherdev_with_old_priv(int sizeof_priv, void *old_priv)
++{
++	struct net_device *pnetdev;
++	struct rtw_netdev_priv_indicator *pnpi;
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,35))
++	pnetdev = alloc_etherdev_mq(sizeof(struct rtw_netdev_priv_indicator), 4);
++#else
++	pnetdev = alloc_etherdev(sizeof(struct rtw_netdev_priv_indicator));
++#endif
++	if (!pnetdev)
++		goto RETURN;
++	
++	pnpi = netdev_priv(pnetdev);
++	pnpi->priv=old_priv;
++	pnpi->sizeof_priv=sizeof_priv;
++
++RETURN:
++	return pnetdev;
++}
++
++struct net_device *rtw_alloc_etherdev(int sizeof_priv)
++{
++	struct net_device *pnetdev;
++	struct rtw_netdev_priv_indicator *pnpi;
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,35))
++	pnetdev = alloc_etherdev_mq(sizeof(struct rtw_netdev_priv_indicator), 4);
++#else
++	pnetdev = alloc_etherdev(sizeof(struct rtw_netdev_priv_indicator));
++#endif
++	if (!pnetdev)
++		goto RETURN;
++	
++	pnpi = netdev_priv(pnetdev);
++	
++	pnpi->priv = rtw_zvmalloc(sizeof_priv);
++	if (!pnpi->priv) {
++		free_netdev(pnetdev);
++		pnetdev = NULL;
++		goto RETURN;
++	}
++	
++	pnpi->sizeof_priv=sizeof_priv;
++RETURN:
++	return pnetdev;
++}
++
++void rtw_free_netdev(struct net_device * netdev)
++{
++	struct rtw_netdev_priv_indicator *pnpi;
++	
++	if(!netdev)
++		goto RETURN;
++	
++	pnpi = netdev_priv(netdev);
++
++	if(!pnpi->priv)
++		goto RETURN;
++
++	rtw_vmfree(pnpi->priv, pnpi->sizeof_priv);
++	free_netdev(netdev);
++
++RETURN:
++	return;
++}
++
++/*
++* Jeff: this function should be called under ioctl (rtnl_lock is accquired) while 
++* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)
++*/
++int rtw_change_ifname(_adapter *padapter, const char *ifname)
++{
++	struct net_device *pnetdev;
++	struct net_device *cur_pnetdev = padapter->pnetdev;
++	struct rereg_nd_name_data *rereg_priv;
++	int ret;
++
++	if(!padapter)
++		goto error;
++
++	rereg_priv = &padapter->rereg_nd_name_priv;
++	
++	//free the old_pnetdev
++	if(rereg_priv->old_pnetdev) {
++		free_netdev(rereg_priv->old_pnetdev);
++		rereg_priv->old_pnetdev = NULL;
++	}
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26))
++	if(!rtnl_is_locked())
++		unregister_netdev(cur_pnetdev);
++	else
++#endif
++		unregister_netdevice(cur_pnetdev);
++
++	rtw_proc_remove_one(cur_pnetdev);
++
++	rereg_priv->old_pnetdev=cur_pnetdev;
++
++	pnetdev = rtw_init_netdev(padapter);
++	if (!pnetdev)  {
++		ret = -1;
++		goto error;
++	}
++
++	SET_NETDEV_DEV(pnetdev, dvobj_to_dev(adapter_to_dvobj(padapter)));
++
++	rtw_init_netdev_name(pnetdev, ifname);
++
++	_rtw_memcpy(pnetdev->dev_addr, padapter->eeprompriv.mac_addr, ETH_ALEN);
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26))
++	if(!rtnl_is_locked())
++		ret = register_netdev(pnetdev);
++	else
++#endif
++		ret = register_netdevice(pnetdev);
++
++	if ( ret != 0) {
++		RT_TRACE(_module_hci_intfs_c_,_drv_err_,("register_netdev() failed\n"));
++		goto error;
++	}
++
++	rtw_proc_init_one(pnetdev);
++
++	return 0;
++
++error:
++	
++	return -1;
++	
++}
++#endif
++#endif //MEM_ALLOC_REFINE_ADAPTOR
++
++#ifdef PLATFORM_FREEBSD
++/*
++ * Copy a buffer from userspace and write into kernel address 
++ * space.
++ *
++ * This emulation just calls the FreeBSD copyin function (to 
++ * copy data from user space buffer into a kernel space buffer)
++ * and is designed to be used with the above io_write_wrapper.
++ *
++ * This function should return the number of bytes not copied.
++ * I.e. success results in a zero value. 
++ * Negative error values are not returned.
++ */
++unsigned long
++copy_from_user(void *to, const void *from, unsigned long n)
++{      
++        if ( copyin(from, to, n) != 0 ) {
++                /* Any errors will be treated as a failure
++                   to copy any of the requested bytes */
++                return n;
++        }
++
++        return 0;
++}
++
++unsigned long
++copy_to_user(void *to, const void *from, unsigned long n)
++{
++	if ( copyout(from, to, n) != 0 ) {
++		/* Any errors will be treated as a failure
++		   to copy any of the requested bytes */
++		return n;
++	}
++
++	return 0;
++}
++
++
++/*
++ * The usb_register and usb_deregister functions are used to register
++ * usb drivers with the usb subsystem. In this compatibility layer
++ * emulation a list of drivers (struct usb_driver) is maintained
++ * and is used for probing/attaching etc.
++ *
++ * usb_register and usb_deregister simply call these functions.
++ */
++int 
++usb_register(struct usb_driver *driver)
++{
++        rtw_usb_linux_register(driver);
++        return 0;
++}
++
++
++int 
++usb_deregister(struct usb_driver *driver)
++{
++        rtw_usb_linux_deregister(driver);
++        return 0;
++}
++
++void module_init_exit_wrapper(void *arg)
++{
++        int (*func)(void) = arg;
++        func();
++        return;
++}
++
++#endif //PLATFORM_FREEBSD
++u64 rtw_modular64(u64 x, u64 y)
++{
++#ifdef PLATFORM_LINUX
++	return do_div(x, y);
++#elif defined(PLATFORM_WINDOWS)
++	return (x % y);
++#elif defined(PLATFORM_FREEBSD)
++	return (x %y);
++#endif
++}
++
++u64 rtw_division64(u64 x, u64 y)
++{
++#ifdef PLATFORM_LINUX
++	do_div(x, y);
++	return x;
++#elif defined(PLATFORM_WINDOWS)
++	return (x / y);
++#elif defined(PLATFORM_FREEBSD)
++	return (x / y);
++#endif
++}
++
++void rtw_buf_free(u8 **buf, u32 *buf_len)
++{
++	u32 ori_len;
++
++	if (!buf || !buf_len)
++		return;
++
++	ori_len = *buf_len;
++
++	if (*buf) {
++		u32 tmp_buf_len = *buf_len;
++		*buf_len = 0;
++		rtw_mfree(*buf, tmp_buf_len);
++		*buf = NULL;
++	}
++}
++
++void rtw_buf_update(u8 **buf, u32 *buf_len, u8 *src, u32 src_len)
++{
++	u32 ori_len = 0, dup_len = 0;
++	u8 *ori = NULL;
++	u8 *dup = NULL;
++
++	if (!buf || !buf_len)
++		return;
++
++	if (!src || !src_len)
++		goto keep_ori;
++
++	/* duplicate src */
++	dup = rtw_malloc(src_len);
++	if (dup) {
++		dup_len = src_len;
++		_rtw_memcpy(dup, src, dup_len);
++	}
++
++keep_ori:
++	ori = *buf;
++	ori_len = *buf_len;
++
++	/* replace buf with dup */
++	*buf_len = 0;
++	*buf = dup;
++	*buf_len = dup_len;
++
++	/* free ori */
++	if (ori && ori_len > 0)
++		rtw_mfree(ori, ori_len);
++}
++
++
++/**
++ * rtw_cbuf_full - test if cbuf is full
++ * @cbuf: pointer of struct rtw_cbuf
++ *
++ * Returns: _TRUE if cbuf is full
++ */
++inline bool rtw_cbuf_full(struct rtw_cbuf *cbuf)
++{
++	return (cbuf->write == cbuf->read-1)? _TRUE : _FALSE;
++}
++
++/**
++ * rtw_cbuf_empty - test if cbuf is empty
++ * @cbuf: pointer of struct rtw_cbuf
++ *
++ * Returns: _TRUE if cbuf is empty
++ */
++inline bool rtw_cbuf_empty(struct rtw_cbuf *cbuf)
++{
++	return (cbuf->write == cbuf->read)? _TRUE : _FALSE;
++}
++
++/**
++ * rtw_cbuf_push - push a pointer into cbuf
++ * @cbuf: pointer of struct rtw_cbuf
++ * @buf: pointer to push in
++ *
++ * Lock free operation, be careful of the use scheme
++ * Returns: _TRUE push success
++ */
++bool rtw_cbuf_push(struct rtw_cbuf *cbuf, void *buf)
++{
++	if (rtw_cbuf_full(cbuf))
++		return _FAIL;
++
++	if (0)
++		DBG_871X("%s on %u\n", __func__, cbuf->write);
++	cbuf->bufs[cbuf->write] = buf;
++	cbuf->write = (cbuf->write+1)%cbuf->size;
++
++	return _SUCCESS;
++}
++
++/**
++ * rtw_cbuf_pop - pop a pointer from cbuf
++ * @cbuf: pointer of struct rtw_cbuf
++ *
++ * Lock free operation, be careful of the use scheme
++ * Returns: pointer popped out
++ */
++void *rtw_cbuf_pop(struct rtw_cbuf *cbuf)
++{
++	void *buf;
++	if (rtw_cbuf_empty(cbuf))
++		return NULL;
++
++	if (0)
++		DBG_871X("%s on %u\n", __func__, cbuf->read);
++	buf = cbuf->bufs[cbuf->read];
++	cbuf->read = (cbuf->read+1)%cbuf->size;
++
++	return buf;
++}
++
++/**
++ * rtw_cbuf_alloc - allocte a rtw_cbuf with given size and do initialization
++ * @size: size of pointer
++ *
++ * Returns: pointer of srtuct rtw_cbuf, NULL for allocation failure
++ */
++struct rtw_cbuf *rtw_cbuf_alloc(u32 size)
++{
++	struct rtw_cbuf *cbuf;
++
++	cbuf = (struct rtw_cbuf *)rtw_malloc(sizeof(*cbuf) + sizeof(void*)*size);
++
++	if (cbuf) {
++		cbuf->write = cbuf->read = 0;
++		cbuf->size = size;
++	}
++
++	return cbuf;
++}
++
++/**
++ * rtw_cbuf_free - free the given rtw_cbuf
++ * @cbuf: pointer of struct rtw_cbuf to free
++ */
++void rtw_cbuf_free(struct rtw_cbuf *cbuf)
++{
++	rtw_mfree((u8*)cbuf, sizeof(*cbuf) + sizeof(void*)*cbuf->size);
++}
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/runwpa linux-raspberry-pi/drivers/net/wireless/rtl8192cu/runwpa
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/runwpa	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/runwpa	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,20 @@
++#!/bin/bash
++
++if [ "`which iwconfig`" = "" ] ; then 
++	echo "WARNING:Wireless tool not exist!"
++	echo "        Please install it!"
++	exit
++else
++	if [ `uname -r | cut -d. -f2` -eq 4 ]; then
++		wpa_supplicant -D ipw -c wpa1.conf -i wlan0	
++	else
++	if [ `iwconfig -v |awk '{print $4}' | head -n 1` -lt  18 ] ; then
++		wpa_supplicant -D ipw -c wpa1.conf -i wlan0  
++	else	  
++		wpa_supplicant -D wext -c wpa1.conf -i wlan0 
++	fi
++
++	fi
++fi
++
++
+diff -Nur linux-3.12.6/drivers/net/wireless/rtl8192cu/wlan0dhcp linux-raspberry-pi/drivers/net/wireless/rtl8192cu/wlan0dhcp
+--- linux-3.12.6/drivers/net/wireless/rtl8192cu/wlan0dhcp	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/net/wireless/rtl8192cu/wlan0dhcp	2013-12-29 10:41:33.000000000 +0100
+@@ -0,0 +1,16 @@
++#!/bin/bash
++
++var0=`ps aux|awk '/dhclient wlan0/'|awk '$11!="awk"{print $2}'`
++
++kill $var0
++cp ifcfg-wlan0 /etc/sysconfig/network-scripts/
++
++dhclient wlan0
++
++var1=`ifconfig wlan0 |awk '/inet/{print $2}'|awk -F: '{print $2}'`
++
++
++rm -f /etc/sysconfig/network-scripts/ifcfg-wlan0
++
++echo "get ip: $var1"
++
+diff -Nur linux-3.12.6/drivers/spi/Kconfig linux-raspberry-pi/drivers/spi/Kconfig
+--- linux-3.12.6/drivers/spi/Kconfig	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/spi/Kconfig	2013-12-29 10:41:38.000000000 +0100
+@@ -85,6 +85,14 @@
+ 	  is for the regular SPI controller. Slave mode operation is not also
+ 	  not supported.
+ 
++config SPI_BCM2708
++	tristate "BCM2708 SPI controller driver (SPI0)"
++	depends on MACH_BCM2708
++	help
++	  This selects a driver for the Broadcom BCM2708 SPI master (SPI0). This
++	  driver is not compatible with the "Universal SPI Master" or the SPI slave
++	  device.
++
+ config SPI_BFIN5XX
+ 	tristate "SPI controller driver for ADI Blackfin5xx"
+ 	depends on BLACKFIN && !BF60x
+diff -Nur linux-3.12.6/drivers/spi/Makefile linux-raspberry-pi/drivers/spi/Makefile
+--- linux-3.12.6/drivers/spi/Makefile	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/spi/Makefile	2013-12-29 10:41:38.000000000 +0100
+@@ -18,6 +18,7 @@
+ obj-$(CONFIG_SPI_BCM63XX)		+= spi-bcm63xx.o
+ obj-$(CONFIG_SPI_BFIN5XX)		+= spi-bfin5xx.o
+ obj-$(CONFIG_SPI_BFIN_V3)               += spi-bfin-v3.o
++obj-$(CONFIG_SPI_BCM2708)		+= spi-bcm2708.o
+ obj-$(CONFIG_SPI_BFIN_SPORT)		+= spi-bfin-sport.o
+ obj-$(CONFIG_SPI_BITBANG)		+= spi-bitbang.o
+ obj-$(CONFIG_SPI_BUTTERFLY)		+= spi-butterfly.o
+diff -Nur linux-3.12.6/drivers/spi/spi-bcm2708.c linux-raspberry-pi/drivers/spi/spi-bcm2708.c
+--- linux-3.12.6/drivers/spi/spi-bcm2708.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/spi/spi-bcm2708.c	2013-12-29 10:41:38.000000000 +0100
+@@ -0,0 +1,626 @@
++/*
++ * Driver for Broadcom BCM2708 SPI Controllers
++ *
++ * Copyright (C) 2012 Chris Boot
++ *
++ * This driver is inspired by:
++ * spi-ath79.c, Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
++ * spi-atmel.c, Copyright (C) 2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/spinlock.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/spi/spi.h>
++#include <linux/interrupt.h>
++#include <linux/delay.h>
++#include <linux/log2.h>
++#include <linux/sched.h>
++#include <linux/wait.h>
++
++/* SPI register offsets */
++#define SPI_CS			0x00
++#define SPI_FIFO		0x04
++#define SPI_CLK			0x08
++#define SPI_DLEN		0x0c
++#define SPI_LTOH		0x10
++#define SPI_DC			0x14
++
++/* Bitfields in CS */
++#define SPI_CS_LEN_LONG		0x02000000
++#define SPI_CS_DMA_LEN		0x01000000
++#define SPI_CS_CSPOL2		0x00800000
++#define SPI_CS_CSPOL1		0x00400000
++#define SPI_CS_CSPOL0		0x00200000
++#define SPI_CS_RXF		0x00100000
++#define SPI_CS_RXR		0x00080000
++#define SPI_CS_TXD		0x00040000
++#define SPI_CS_RXD		0x00020000
++#define SPI_CS_DONE		0x00010000
++#define SPI_CS_LEN		0x00002000
++#define SPI_CS_REN		0x00001000
++#define SPI_CS_ADCS		0x00000800
++#define SPI_CS_INTR		0x00000400
++#define SPI_CS_INTD		0x00000200
++#define SPI_CS_DMAEN		0x00000100
++#define SPI_CS_TA		0x00000080
++#define SPI_CS_CSPOL		0x00000040
++#define SPI_CS_CLEAR_RX		0x00000020
++#define SPI_CS_CLEAR_TX		0x00000010
++#define SPI_CS_CPOL		0x00000008
++#define SPI_CS_CPHA		0x00000004
++#define SPI_CS_CS_10		0x00000002
++#define SPI_CS_CS_01		0x00000001
++
++#define SPI_TIMEOUT_MS	150
++
++#define DRV_NAME	"bcm2708_spi"
++
++struct bcm2708_spi {
++	spinlock_t lock;
++	void __iomem *base;
++	int irq;
++	struct clk *clk;
++	bool stopping;
++
++	struct list_head queue;
++	struct workqueue_struct *workq;
++	struct work_struct work;
++	struct completion done;
++
++	const u8 *tx_buf;
++	u8 *rx_buf;
++	int len;
++};
++
++struct bcm2708_spi_state {
++	u32 cs;
++	u16 cdiv;
++};
++
++/*
++ * This function sets the ALT mode on the SPI pins so that we can use them with
++ * the SPI hardware.
++ *
++ * FIXME: This is a hack. Use pinmux / pinctrl.
++ */
++static void bcm2708_init_pinmode(void)
++{
++#define INP_GPIO(g) *(gpio+((g)/10)) &= ~(7<<(((g)%10)*3))
++#define SET_GPIO_ALT(g,a) *(gpio+(((g)/10))) |= (((a)<=3?(a)+4:(a)==4?3:2)<<(((g)%10)*3))
++
++	int pin;
++	u32 *gpio = ioremap(0x20200000, SZ_16K);
++
++	/* SPI is on GPIO 7..11 */
++	for (pin = 7; pin <= 11; pin++) {
++		INP_GPIO(pin);		/* set mode to GPIO input first */
++		SET_GPIO_ALT(pin, 0);	/* set mode to ALT 0 */
++	}
++
++	iounmap(gpio);
++
++#undef INP_GPIO
++#undef SET_GPIO_ALT
++}
++
++static inline u32 bcm2708_rd(struct bcm2708_spi *bs, unsigned reg)
++{
++	return readl(bs->base + reg);
++}
++
++static inline void bcm2708_wr(struct bcm2708_spi *bs, unsigned reg, u32 val)
++{
++	writel(val, bs->base + reg);
++}
++
++static inline void bcm2708_rd_fifo(struct bcm2708_spi *bs, int len)
++{
++	u8 byte;
++
++	while (len--) {
++		byte = bcm2708_rd(bs, SPI_FIFO);
++		if (bs->rx_buf)
++			*bs->rx_buf++ = byte;
++	}
++}
++
++static inline void bcm2708_wr_fifo(struct bcm2708_spi *bs, int len)
++{
++	u8 byte;
++	u16 val;
++
++	if (len > bs->len)
++		len = bs->len;
++
++	if (unlikely(bcm2708_rd(bs, SPI_CS) & SPI_CS_LEN)) {
++		/* LoSSI mode */
++		if (unlikely(len % 2)) {
++			printk(KERN_ERR"bcm2708_wr_fifo: length must be even, skipping.\n");
++			bs->len = 0;
++			return;
++		}
++		while (len) {
++			if (bs->tx_buf) {
++				val = *(const u16 *)bs->tx_buf;
++				bs->tx_buf += 2;
++			} else
++				val = 0;
++			bcm2708_wr(bs, SPI_FIFO, val);
++			bs->len -= 2;
++			len -= 2;
++		}
++		return;
++	}
++
++	while (len--) {
++		byte = bs->tx_buf ? *bs->tx_buf++ : 0;
++		bcm2708_wr(bs, SPI_FIFO, byte);
++		bs->len--;
++	}
++}
++
++static irqreturn_t bcm2708_spi_interrupt(int irq, void *dev_id)
++{
++	struct spi_master *master = dev_id;
++	struct bcm2708_spi *bs = spi_master_get_devdata(master);
++	u32 cs;
++
++	spin_lock(&bs->lock);
++
++	cs = bcm2708_rd(bs, SPI_CS);
++
++	if (cs & SPI_CS_DONE) {
++		if (bs->len) { /* first interrupt in a transfer */
++			/* fill the TX fifo with up to 16 bytes */
++			bcm2708_wr_fifo(bs, 16);
++		} else { /* transfer complete */
++			/* disable interrupts */
++			cs &= ~(SPI_CS_INTR | SPI_CS_INTD);
++			bcm2708_wr(bs, SPI_CS, cs);
++
++			/* drain RX FIFO */
++			while (cs & SPI_CS_RXD) {
++				bcm2708_rd_fifo(bs, 1);
++				cs = bcm2708_rd(bs, SPI_CS);
++			}
++
++			/* wake up our bh */
++			complete(&bs->done);
++		}
++	} else if (cs & SPI_CS_RXR) {
++		/* read 12 bytes of data */
++		bcm2708_rd_fifo(bs, 12);
++
++		/* write up to 12 bytes */
++		bcm2708_wr_fifo(bs, 12);
++	}
++
++	spin_unlock(&bs->lock);
++
++	return IRQ_HANDLED;
++}
++
++static int bcm2708_setup_state(struct spi_master *master,
++		struct device *dev, struct bcm2708_spi_state *state,
++		u32 hz, u8 csel, u8 mode, u8 bpw)
++{
++	struct bcm2708_spi *bs = spi_master_get_devdata(master);
++	int cdiv;
++	unsigned long bus_hz;
++	u32 cs = 0;
++
++	bus_hz = clk_get_rate(bs->clk);
++
++	if (hz >= bus_hz) {
++		cdiv = 2; /* bus_hz / 2 is as fast as we can go */
++	} else if (hz) {
++		cdiv = DIV_ROUND_UP(bus_hz, hz);
++
++		/* CDIV must be a power of 2, so round up */
++		cdiv = roundup_pow_of_two(cdiv);
++
++		if (cdiv > 65536) {
++			dev_dbg(dev,
++				"setup: %d Hz too slow, cdiv %u; min %ld Hz\n",
++				hz, cdiv, bus_hz / 65536);
++			return -EINVAL;
++		} else if (cdiv == 65536) {
++			cdiv = 0;
++		} else if (cdiv == 1) {
++			cdiv = 2; /* 1 gets rounded down to 0; == 65536 */
++		}
++	} else {
++		cdiv = 0;
++	}
++
++	switch (bpw) {
++	case 8:
++		break;
++	case 9:
++		/* Reading in LoSSI mode is a special case. See 'BCM2835 ARM Peripherals' datasheet */
++		cs |= SPI_CS_LEN;
++		break;
++	default:
++		dev_dbg(dev, "setup: invalid bits_per_word %u (must be 8 or 9)\n",
++			bpw);
++		return -EINVAL;
++	}
++
++	if (mode & SPI_CPOL)
++		cs |= SPI_CS_CPOL;
++	if (mode & SPI_CPHA)
++		cs |= SPI_CS_CPHA;
++
++	if (!(mode & SPI_NO_CS)) {
++		if (mode & SPI_CS_HIGH) {
++			cs |= SPI_CS_CSPOL;
++			cs |= SPI_CS_CSPOL0 << csel;
++		}
++
++		cs |= csel;
++	} else {
++		cs |= SPI_CS_CS_10 | SPI_CS_CS_01;
++	}
++
++	if (state) {
++		state->cs = cs;
++		state->cdiv = cdiv;
++		dev_dbg(dev, "setup: want %d Hz; "
++			"bus_hz=%lu / cdiv=%u == %lu Hz; "
++			"mode %u: cs 0x%08X\n",
++			hz, bus_hz, cdiv, bus_hz/cdiv, mode, cs);
++	}
++
++	return 0;
++}
++
++static int bcm2708_process_transfer(struct bcm2708_spi *bs,
++		struct spi_message *msg, struct spi_transfer *xfer)
++{
++	struct spi_device *spi = msg->spi;
++	struct bcm2708_spi_state state, *stp;
++	int ret;
++	u32 cs;
++
++	if (bs->stopping)
++		return -ESHUTDOWN;
++
++	if (xfer->bits_per_word || xfer->speed_hz) {
++		ret = bcm2708_setup_state(spi->master, &spi->dev, &state,
++			xfer->speed_hz ? xfer->speed_hz : spi->max_speed_hz,
++			spi->chip_select, spi->mode,
++			xfer->bits_per_word ? xfer->bits_per_word :
++				spi->bits_per_word);
++		if (ret)
++			return ret;
++
++		stp = &state;
++	} else {
++		stp = spi->controller_state;
++	}
++
++	INIT_COMPLETION(bs->done);
++	bs->tx_buf = xfer->tx_buf;
++	bs->rx_buf = xfer->rx_buf;
++	bs->len = xfer->len;
++
++	cs = stp->cs | SPI_CS_INTR | SPI_CS_INTD | SPI_CS_TA;
++
++	bcm2708_wr(bs, SPI_CLK, stp->cdiv);
++	bcm2708_wr(bs, SPI_CS, cs);
++
++	ret = wait_for_completion_timeout(&bs->done,
++			msecs_to_jiffies(SPI_TIMEOUT_MS));
++	if (ret == 0) {
++		dev_err(&spi->dev, "transfer timed out\n");
++		return -ETIMEDOUT;
++	}
++
++	if (xfer->delay_usecs)
++		udelay(xfer->delay_usecs);
++
++	if (list_is_last(&xfer->transfer_list, &msg->transfers) ||
++			xfer->cs_change) {
++		/* clear TA and interrupt flags */
++		bcm2708_wr(bs, SPI_CS, stp->cs);
++	}
++
++	msg->actual_length += (xfer->len - bs->len);
++
++	return 0;
++}
++
++static void bcm2708_work(struct work_struct *work)
++{
++	struct bcm2708_spi *bs = container_of(work, struct bcm2708_spi, work);
++	unsigned long flags;
++	struct spi_message *msg;
++	struct spi_transfer *xfer;
++	int status = 0;
++
++	spin_lock_irqsave(&bs->lock, flags);
++	while (!list_empty(&bs->queue)) {
++		msg = list_first_entry(&bs->queue, struct spi_message, queue);
++		list_del_init(&msg->queue);
++		spin_unlock_irqrestore(&bs->lock, flags);
++
++		list_for_each_entry(xfer, &msg->transfers, transfer_list) {
++			status = bcm2708_process_transfer(bs, msg, xfer);
++			if (status)
++				break;
++		}
++
++		msg->status = status;
++		msg->complete(msg->context);
++
++		spin_lock_irqsave(&bs->lock, flags);
++	}
++	spin_unlock_irqrestore(&bs->lock, flags);
++}
++
++static int bcm2708_spi_setup(struct spi_device *spi)
++{
++	struct bcm2708_spi *bs = spi_master_get_devdata(spi->master);
++	struct bcm2708_spi_state *state;
++	int ret;
++
++	if (bs->stopping)
++		return -ESHUTDOWN;
++
++	if (!(spi->mode & SPI_NO_CS) &&
++			(spi->chip_select > spi->master->num_chipselect)) {
++		dev_dbg(&spi->dev,
++			"setup: invalid chipselect %u (%u defined)\n",
++			spi->chip_select, spi->master->num_chipselect);
++		return -EINVAL;
++	}
++
++	state = spi->controller_state;
++	if (!state) {
++		state = kzalloc(sizeof(*state), GFP_KERNEL);
++		if (!state)
++			return -ENOMEM;
++
++		spi->controller_state = state;
++	}
++
++	ret = bcm2708_setup_state(spi->master, &spi->dev, state,
++		spi->max_speed_hz, spi->chip_select, spi->mode,
++		spi->bits_per_word);
++	if (ret < 0) {
++		kfree(state);
++		spi->controller_state = NULL;
++                return ret;
++	}
++
++	dev_dbg(&spi->dev,
++		"setup: cd %d: %d Hz, bpw %u, mode 0x%x -> CS=%08x CDIV=%04x\n",
++		spi->chip_select, spi->max_speed_hz, spi->bits_per_word,
++		spi->mode, state->cs, state->cdiv);
++
++	return 0;
++}
++
++static int bcm2708_spi_transfer(struct spi_device *spi, struct spi_message *msg)
++{
++	struct bcm2708_spi *bs = spi_master_get_devdata(spi->master);
++	struct spi_transfer *xfer;
++	int ret;
++	unsigned long flags;
++
++	if (unlikely(list_empty(&msg->transfers)))
++		return -EINVAL;
++
++	if (bs->stopping)
++		return -ESHUTDOWN;
++
++	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
++		if (!(xfer->tx_buf || xfer->rx_buf) && xfer->len) {
++			dev_dbg(&spi->dev, "missing rx or tx buf\n");
++			return -EINVAL;
++		}
++
++		if (!xfer->bits_per_word || xfer->speed_hz)
++			continue;
++
++		ret = bcm2708_setup_state(spi->master, &spi->dev, NULL,
++			xfer->speed_hz ? xfer->speed_hz : spi->max_speed_hz,
++			spi->chip_select, spi->mode,
++			xfer->bits_per_word ? xfer->bits_per_word :
++				spi->bits_per_word);
++		if (ret)
++			return ret;
++	}
++
++	msg->status = -EINPROGRESS;
++	msg->actual_length = 0;
++
++	spin_lock_irqsave(&bs->lock, flags);
++	list_add_tail(&msg->queue, &bs->queue);
++	queue_work(bs->workq, &bs->work);
++	spin_unlock_irqrestore(&bs->lock, flags);
++
++	return 0;
++}
++
++static void bcm2708_spi_cleanup(struct spi_device *spi)
++{
++	if (spi->controller_state) {
++		kfree(spi->controller_state);
++		spi->controller_state = NULL;
++	}
++}
++
++static int bcm2708_spi_probe(struct platform_device *pdev)
++{
++	struct resource *regs;
++	int irq, err = -ENOMEM;
++	struct clk *clk;
++	struct spi_master *master;
++	struct bcm2708_spi *bs;
++
++	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!regs) {
++		dev_err(&pdev->dev, "could not get IO memory\n");
++		return -ENXIO;
++	}
++
++	irq = platform_get_irq(pdev, 0);
++	if (irq < 0) {
++		dev_err(&pdev->dev, "could not get IRQ\n");
++		return irq;
++	}
++
++	clk = clk_get(&pdev->dev, NULL);
++	if (IS_ERR(clk)) {
++		dev_err(&pdev->dev, "could not find clk: %ld\n", PTR_ERR(clk));
++		return PTR_ERR(clk);
++	}
++
++	bcm2708_init_pinmode();
++
++	master = spi_alloc_master(&pdev->dev, sizeof(*bs));
++	if (!master) {
++		dev_err(&pdev->dev, "spi_alloc_master() failed\n");
++		goto out_clk_put;
++	}
++
++	/* the spi->mode bits understood by this driver: */
++	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_NO_CS;
++
++	master->bus_num = pdev->id;
++	master->num_chipselect = 3;
++	master->setup = bcm2708_spi_setup;
++	master->transfer = bcm2708_spi_transfer;
++	master->cleanup = bcm2708_spi_cleanup;
++	platform_set_drvdata(pdev, master);
++
++	bs = spi_master_get_devdata(master);
++
++	spin_lock_init(&bs->lock);
++	INIT_LIST_HEAD(&bs->queue);
++	init_completion(&bs->done);
++	INIT_WORK(&bs->work, bcm2708_work);
++
++	bs->base = ioremap(regs->start, resource_size(regs));
++	if (!bs->base) {
++		dev_err(&pdev->dev, "could not remap memory\n");
++		goto out_master_put;
++	}
++
++	bs->workq = create_singlethread_workqueue(dev_name(&pdev->dev));
++	if (!bs->workq) {
++		dev_err(&pdev->dev, "could not create workqueue\n");
++		goto out_iounmap;
++	}
++
++	bs->irq = irq;
++	bs->clk = clk;
++	bs->stopping = false;
++
++	err = request_irq(irq, bcm2708_spi_interrupt, 0, dev_name(&pdev->dev),
++			master);
++	if (err) {
++		dev_err(&pdev->dev, "could not request IRQ: %d\n", err);
++		goto out_workqueue;
++	}
++
++	/* initialise the hardware */
++	clk_enable(clk);
++	bcm2708_wr(bs, SPI_CS, SPI_CS_REN | SPI_CS_CLEAR_RX | SPI_CS_CLEAR_TX);
++
++	err = spi_register_master(master);
++	if (err) {
++		dev_err(&pdev->dev, "could not register SPI master: %d\n", err);
++		goto out_free_irq;
++	}
++
++	dev_info(&pdev->dev, "SPI Controller at 0x%08lx (irq %d)\n",
++		(unsigned long)regs->start, irq);
++
++	return 0;
++
++out_free_irq:
++	free_irq(bs->irq, master);
++out_workqueue:
++	destroy_workqueue(bs->workq);
++out_iounmap:
++	iounmap(bs->base);
++out_master_put:
++	spi_master_put(master);
++out_clk_put:
++	clk_put(clk);
++	return err;
++}
++
++static int bcm2708_spi_remove(struct platform_device *pdev)
++{
++	struct spi_master *master = platform_get_drvdata(pdev);
++	struct bcm2708_spi *bs = spi_master_get_devdata(master);
++
++	/* reset the hardware and block queue progress */
++	spin_lock_irq(&bs->lock);
++	bs->stopping = true;
++	bcm2708_wr(bs, SPI_CS, SPI_CS_CLEAR_RX | SPI_CS_CLEAR_TX);
++	spin_unlock_irq(&bs->lock);
++
++	flush_work_sync(&bs->work);
++
++	clk_disable(bs->clk);
++	clk_put(bs->clk);
++	free_irq(bs->irq, master);
++	iounmap(bs->base);
++
++	spi_unregister_master(master);
++
++	return 0;
++}
++
++static struct platform_driver bcm2708_spi_driver = {
++	.driver		= {
++		.name	= DRV_NAME,
++		.owner	= THIS_MODULE,
++	},
++	.probe		= bcm2708_spi_probe,
++	.remove		= bcm2708_spi_remove,
++};
++
++
++static int __init bcm2708_spi_init(void)
++{
++	return platform_driver_probe(&bcm2708_spi_driver, bcm2708_spi_probe);
++}
++module_init(bcm2708_spi_init);
++
++static void __exit bcm2708_spi_exit(void)
++{
++	platform_driver_unregister(&bcm2708_spi_driver);
++}
++module_exit(bcm2708_spi_exit);
++
++
++//module_platform_driver(bcm2708_spi_driver);
++
++MODULE_DESCRIPTION("SPI controller driver for Broadcom BCM2708");
++MODULE_AUTHOR("Chris Boot <bootc@bootc.net>");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:" DRV_NAME);
+diff -Nur linux-3.12.6/drivers/staging/media/lirc/Kconfig linux-raspberry-pi/drivers/staging/media/lirc/Kconfig
+--- linux-3.12.6/drivers/staging/media/lirc/Kconfig	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/staging/media/lirc/Kconfig	2013-12-29 10:41:39.000000000 +0100
+@@ -38,6 +38,12 @@
+ 	help
+ 	  Driver for Homebrew Parallel Port Receivers
+ 
++config LIRC_RPI
++	tristate "Homebrew GPIO Port Receiver/Transmitter for the RaspberryPi"
++	depends on LIRC
++	help
++	  Driver for Homebrew GPIO Port Receiver/Transmitter for the RaspberryPi
++
+ config LIRC_SASEM
+ 	tristate "Sasem USB IR Remote"
+ 	depends on LIRC && USB
+diff -Nur linux-3.12.6/drivers/staging/media/lirc/lirc_rpi.c linux-raspberry-pi/drivers/staging/media/lirc/lirc_rpi.c
+--- linux-3.12.6/drivers/staging/media/lirc/lirc_rpi.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/staging/media/lirc/lirc_rpi.c	2013-12-29 10:41:39.000000000 +0100
+@@ -0,0 +1,693 @@
++/*
++ * lirc_rpi.c
++ *
++ * lirc_rpi - Device driver that records pulse- and pause-lengths
++ *	      (space-lengths) (just like the lirc_serial driver does)
++ *	      between GPIO interrupt events on the Raspberry Pi.
++ *	      Lots of code has been taken from the lirc_serial module,
++ *	      so I would like say thanks to the authors.
++ *
++ * Copyright (C) 2012 Aron Robert Szabo <aron@reon.hu>,
++ *		      Michael Bishop <cleverca22@gmail.com>
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License as published by
++ *  the Free Software Foundation; either version 2 of the License, or
++ *  (at your option) any later version.
++ *
++ *  This program is distributed in the hope that it will be useful,
++ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *  GNU General Public License for more details.
++ *
++ *  You should have received a copy of the GNU General Public License
++ *  along with this program; if not, write to the Free Software
++ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <linux/module.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/sched.h>
++#include <linux/kernel.h>
++#include <linux/time.h>
++#include <linux/string.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/irq.h>
++#include <linux/spinlock.h>
++#include <media/lirc.h>
++#include <media/lirc_dev.h>
++#include <linux/gpio.h>
++
++#define LIRC_DRIVER_NAME "lirc_rpi"
++#define RBUF_LEN 256
++#define LIRC_TRANSMITTER_LATENCY 256
++
++#ifndef MAX_UDELAY_MS
++#define MAX_UDELAY_US 5000
++#else
++#define MAX_UDELAY_US (MAX_UDELAY_MS*1000)
++#endif
++
++#define dprintk(fmt, args...)					\
++	do {							\
++		if (debug)					\
++			printk(KERN_DEBUG LIRC_DRIVER_NAME ": "	\
++			       fmt, ## args);			\
++	} while (0)
++
++/* module parameters */
++
++/* set the default GPIO input pin */
++static int gpio_in_pin = 18;
++/* set the default GPIO output pin */
++static int gpio_out_pin = 17;
++/* enable debugging messages */
++static bool debug;
++/* -1 = auto, 0 = active high, 1 = active low */
++static int sense = -1;
++/* use softcarrier by default */
++static bool softcarrier = 1;
++/* 0 = do not invert output, 1 = invert output */
++static bool invert = 0;
++
++struct gpio_chip *gpiochip;
++struct irq_chip *irqchip;
++struct irq_data *irqdata;
++
++/* forward declarations */
++static long send_pulse(unsigned long length);
++static void send_space(long length);
++static void lirc_rpi_exit(void);
++
++int valid_gpio_pins[] = { 0, 1, 4, 8, 7, 9, 10, 11, 14, 15, 17, 18, 21, 22, 23,
++	24, 25 };
++
++static struct platform_device *lirc_rpi_dev;
++static struct timeval lasttv = { 0, 0 };
++static struct lirc_buffer rbuf;
++static spinlock_t lock;
++
++/* initialized/set in init_timing_params() */
++static unsigned int freq = 38000;
++static unsigned int duty_cycle = 50;
++static unsigned long period;
++static unsigned long pulse_width;
++static unsigned long space_width;
++
++static void safe_udelay(unsigned long usecs)
++{
++	while (usecs > MAX_UDELAY_US) {
++		udelay(MAX_UDELAY_US);
++		usecs -= MAX_UDELAY_US;
++	}
++	udelay(usecs);
++}
++
++static int init_timing_params(unsigned int new_duty_cycle,
++	unsigned int new_freq)
++{
++	/*
++	 * period, pulse/space width are kept with 8 binary places -
++	 * IE multiplied by 256.
++	 */
++	if (256 * 1000000L / new_freq * new_duty_cycle / 100 <=
++	    LIRC_TRANSMITTER_LATENCY)
++		return -EINVAL;
++	if (256 * 1000000L / new_freq * (100 - new_duty_cycle) / 100 <=
++	    LIRC_TRANSMITTER_LATENCY)
++		return -EINVAL;
++	duty_cycle = new_duty_cycle;
++	freq = new_freq;
++	period = 256 * 1000000L / freq;
++	pulse_width = period * duty_cycle / 100;
++	space_width = period - pulse_width;
++	dprintk("in init_timing_params, freq=%d pulse=%ld, "
++		"space=%ld\n", freq, pulse_width, space_width);
++	return 0;
++}
++
++static long send_pulse_softcarrier(unsigned long length)
++{
++	int flag;
++	unsigned long actual, target, d;
++
++	length <<= 8;
++
++	actual = 0; target = 0; flag = 0;
++	while (actual < length) {
++		if (flag) {
++			gpiochip->set(gpiochip, gpio_out_pin, invert);
++			target += space_width;
++		} else {
++			gpiochip->set(gpiochip, gpio_out_pin, !invert);
++			target += pulse_width;
++		}
++		d = (target - actual -
++		     LIRC_TRANSMITTER_LATENCY + 128) >> 8;
++		/*
++		 * Note - we've checked in ioctl that the pulse/space
++		 * widths are big enough so that d is > 0
++		 */
++		udelay(d);
++		actual += (d << 8) + LIRC_TRANSMITTER_LATENCY;
++		flag = !flag;
++	}
++	return (actual-length) >> 8;
++}
++
++static long send_pulse(unsigned long length)
++{
++	if (length <= 0)
++		return 0;
++
++	if (softcarrier) {
++		return send_pulse_softcarrier(length);
++	} else {
++		gpiochip->set(gpiochip, gpio_out_pin, !invert);
++		safe_udelay(length);
++		return 0;
++	}
++}
++
++static void send_space(long length)
++{
++	gpiochip->set(gpiochip, gpio_out_pin, invert);
++	if (length <= 0)
++		return;
++	safe_udelay(length);
++}
++
++static void rbwrite(int l)
++{
++	if (lirc_buffer_full(&rbuf)) {
++		/* no new signals will be accepted */
++		dprintk("Buffer overrun\n");
++		return;
++	}
++	lirc_buffer_write(&rbuf, (void *)&l);
++}
++
++static void frbwrite(int l)
++{
++	/* simple noise filter */
++	static int pulse, space;
++	static unsigned int ptr;
++
++	if (ptr > 0 && (l & PULSE_BIT)) {
++		pulse += l & PULSE_MASK;
++		if (pulse > 250) {
++			rbwrite(space);
++			rbwrite(pulse | PULSE_BIT);
++			ptr = 0;
++			pulse = 0;
++		}
++		return;
++	}
++	if (!(l & PULSE_BIT)) {
++		if (ptr == 0) {
++			if (l > 20000) {
++				space = l;
++				ptr++;
++				return;
++			}
++		} else {
++			if (l > 20000) {
++				space += pulse;
++				if (space > PULSE_MASK)
++					space = PULSE_MASK;
++				space += l;
++				if (space > PULSE_MASK)
++					space = PULSE_MASK;
++				pulse = 0;
++				return;
++			}
++			rbwrite(space);
++			rbwrite(pulse | PULSE_BIT);
++			ptr = 0;
++			pulse = 0;
++		}
++	}
++	rbwrite(l);
++}
++
++static irqreturn_t irq_handler(int i, void *blah, struct pt_regs *regs)
++{
++	struct timeval tv;
++	long deltv;
++	int data;
++	int signal;
++
++	/* use the GPIO signal level */
++	signal = gpiochip->get(gpiochip, gpio_in_pin);
++
++	/* unmask the irq */
++	irqchip->irq_unmask(irqdata);
++
++	if (sense != -1) {
++		/* get current time */
++		do_gettimeofday(&tv);
++
++		/* calc time since last interrupt in microseconds */
++		deltv = tv.tv_sec-lasttv.tv_sec;
++		if (tv.tv_sec < lasttv.tv_sec ||
++		    (tv.tv_sec == lasttv.tv_sec &&
++		     tv.tv_usec < lasttv.tv_usec)) {
++			printk(KERN_WARNING LIRC_DRIVER_NAME
++			       ": AIEEEE: your clock just jumped backwards\n");
++			printk(KERN_WARNING LIRC_DRIVER_NAME
++			       ": %d %d %lx %lx %lx %lx\n", signal, sense,
++			       tv.tv_sec, lasttv.tv_sec,
++			       tv.tv_usec, lasttv.tv_usec);
++			data = PULSE_MASK;
++		} else if (deltv > 15) {
++			data = PULSE_MASK; /* really long time */
++			if (!(signal^sense)) {
++				/* sanity check */
++				printk(KERN_WARNING LIRC_DRIVER_NAME
++				       ": AIEEEE: %d %d %lx %lx %lx %lx\n",
++				       signal, sense, tv.tv_sec, lasttv.tv_sec,
++				       tv.tv_usec, lasttv.tv_usec);
++				/*
++				 * detecting pulse while this
++				 * MUST be a space!
++				 */
++				sense = sense ? 0 : 1;
++			}
++		} else {
++			data = (int) (deltv*1000000 +
++				      (tv.tv_usec - lasttv.tv_usec));
++		}
++		frbwrite(signal^sense ? data : (data|PULSE_BIT));
++		lasttv = tv;
++		wake_up_interruptible(&rbuf.wait_poll);
++	}
++
++	return IRQ_HANDLED;
++}
++
++static int is_right_chip(struct gpio_chip *chip, void *data)
++{
++	dprintk("is_right_chip %s %d\n", chip->label, strcmp(data, chip->label));
++
++	if (strcmp(data, chip->label) == 0)
++		return 1;
++	return 0;
++}
++
++static int init_port(void)
++{
++	int i, nlow, nhigh, ret, irq;
++
++	gpiochip = gpiochip_find("bcm2708_gpio", is_right_chip);
++
++	if (!gpiochip)
++		return -ENODEV;
++
++	if (gpio_request(gpio_out_pin, LIRC_DRIVER_NAME " ir/out")) {
++		printk(KERN_ALERT LIRC_DRIVER_NAME
++		       ": cant claim gpio pin %d\n", gpio_out_pin);
++		ret = -ENODEV;
++		goto exit_init_port;
++	}
++
++	if (gpio_request(gpio_in_pin, LIRC_DRIVER_NAME " ir/in")) {
++		printk(KERN_ALERT LIRC_DRIVER_NAME
++		       ": cant claim gpio pin %d\n", gpio_in_pin);
++		ret = -ENODEV;
++		goto exit_gpio_free_out_pin;
++	}
++
++	gpiochip->direction_input(gpiochip, gpio_in_pin);
++	gpiochip->direction_output(gpiochip, gpio_out_pin, 1);
++	gpiochip->set(gpiochip, gpio_out_pin, invert);
++
++	irq = gpiochip->to_irq(gpiochip, gpio_in_pin);
++	dprintk("to_irq %d\n", irq);
++	irqdata = irq_get_irq_data(irq);
++
++	if (irqdata && irqdata->chip) {
++		irqchip = irqdata->chip;
++	} else {
++		ret = -ENODEV;
++		goto exit_gpio_free_in_pin;
++	}
++
++	/* if pin is high, then this must be an active low receiver. */
++	if (sense == -1) {
++		/* wait 1/2 sec for the power supply */
++		msleep(500);
++
++		/*
++		 * probe 9 times every 0.04s, collect "votes" for
++		 * active high/low
++		 */
++		nlow = 0;
++		nhigh = 0;
++		for (i = 0; i < 9; i++) {
++			if (gpiochip->get(gpiochip, gpio_in_pin))
++				nlow++;
++			else
++				nhigh++;
++			msleep(40);
++		}
++		sense = (nlow >= nhigh ? 1 : 0);
++		printk(KERN_INFO LIRC_DRIVER_NAME
++		       ": auto-detected active %s receiver on GPIO pin %d\n",
++		       sense ? "low" : "high", gpio_in_pin);
++	} else {
++		printk(KERN_INFO LIRC_DRIVER_NAME
++		       ": manually using active %s receiver on GPIO pin %d\n",
++		       sense ? "low" : "high", gpio_in_pin);
++	}
++
++	return 0;
++
++	exit_gpio_free_in_pin:
++	gpio_free(gpio_in_pin);
++
++	exit_gpio_free_out_pin:
++	gpio_free(gpio_out_pin);
++
++	exit_init_port:
++	return ret;
++}
++
++// called when the character device is opened
++static int set_use_inc(void *data)
++{
++	int result;
++	unsigned long flags;
++
++	/* initialize timestamp */
++	do_gettimeofday(&lasttv);
++
++	result = request_irq(gpiochip->to_irq(gpiochip, gpio_in_pin),
++			     (irq_handler_t) irq_handler, 0,
++			     LIRC_DRIVER_NAME, (void*) 0);
++
++	switch (result) {
++	case -EBUSY:
++		printk(KERN_ERR LIRC_DRIVER_NAME
++		       ": IRQ %d is busy\n",
++		       gpiochip->to_irq(gpiochip, gpio_in_pin));
++		return -EBUSY;
++	case -EINVAL:
++		printk(KERN_ERR LIRC_DRIVER_NAME
++		       ": Bad irq number or handler\n");
++		return -EINVAL;
++	default:
++		dprintk("Interrupt %d obtained\n",
++			gpiochip->to_irq(gpiochip, gpio_in_pin));
++		break;
++	};
++
++	/* initialize pulse/space widths */
++	init_timing_params(duty_cycle, freq);
++
++	spin_lock_irqsave(&lock, flags);
++
++	/* GPIO Pin Falling/Rising Edge Detect Enable */
++	irqchip->irq_set_type(irqdata,
++			      IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING);
++
++	/* unmask the irq */
++	irqchip->irq_unmask(irqdata);
++
++	spin_unlock_irqrestore(&lock, flags);
++
++	return 0;
++}
++
++static void set_use_dec(void *data)
++{
++	unsigned long flags;
++
++	spin_lock_irqsave(&lock, flags);
++
++	/* GPIO Pin Falling/Rising Edge Detect Disable */
++	irqchip->irq_set_type(irqdata, 0);
++	irqchip->irq_mask(irqdata);
++
++	spin_unlock_irqrestore(&lock, flags);
++
++	free_irq(gpiochip->to_irq(gpiochip, gpio_in_pin), (void *) 0);
++
++	dprintk(KERN_INFO LIRC_DRIVER_NAME
++		": freed IRQ %d\n", gpiochip->to_irq(gpiochip, gpio_in_pin));
++}
++
++static ssize_t lirc_write(struct file *file, const char *buf,
++	size_t n, loff_t *ppos)
++{
++	int i, count;
++	unsigned long flags;
++	long delta = 0;
++	int *wbuf;
++
++	count = n / sizeof(int);
++	if (n % sizeof(int) || count % 2 == 0)
++		return -EINVAL;
++	wbuf = memdup_user(buf, n);
++	if (IS_ERR(wbuf))
++		return PTR_ERR(wbuf);
++	spin_lock_irqsave(&lock, flags);
++
++	for (i = 0; i < count; i++) {
++		if (i%2)
++			send_space(wbuf[i] - delta);
++		else
++			delta = send_pulse(wbuf[i]);
++	}
++	gpiochip->set(gpiochip, gpio_out_pin, invert);
++
++	spin_unlock_irqrestore(&lock, flags);
++	kfree(wbuf);
++	return n;
++}
++
++static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
++{
++	int result;
++	__u32 value;
++
++	switch (cmd) {
++	case LIRC_GET_SEND_MODE:
++		return -ENOIOCTLCMD;
++		break;
++
++	case LIRC_SET_SEND_MODE:
++		result = get_user(value, (__u32 *) arg);
++		if (result)
++			return result;
++		/* only LIRC_MODE_PULSE supported */
++		if (value != LIRC_MODE_PULSE)
++			return -ENOSYS;
++		break;
++
++	case LIRC_GET_LENGTH:
++		return -ENOSYS;
++		break;
++
++	case LIRC_SET_SEND_DUTY_CYCLE:
++		dprintk("SET_SEND_DUTY_CYCLE\n");
++		result = get_user(value, (__u32 *) arg);
++		if (result)
++			return result;
++		if (value <= 0 || value > 100)
++			return -EINVAL;
++		return init_timing_params(value, freq);
++		break;
++
++	case LIRC_SET_SEND_CARRIER:
++		dprintk("SET_SEND_CARRIER\n");
++		result = get_user(value, (__u32 *) arg);
++		if (result)
++			return result;
++		if (value > 500000 || value < 20000)
++			return -EINVAL;
++		return init_timing_params(duty_cycle, value);
++		break;
++
++	default:
++		return lirc_dev_fop_ioctl(filep, cmd, arg);
++	}
++	return 0;
++}
++
++static const struct file_operations lirc_fops = {
++	.owner		= THIS_MODULE,
++	.write		= lirc_write,
++	.unlocked_ioctl	= lirc_ioctl,
++	.read		= lirc_dev_fop_read,
++	.poll		= lirc_dev_fop_poll,
++	.open		= lirc_dev_fop_open,
++	.release	= lirc_dev_fop_close,
++	.llseek		= no_llseek,
++};
++
++static struct lirc_driver driver = {
++	.name		= LIRC_DRIVER_NAME,
++	.minor		= -1,
++	.code_length	= 1,
++	.sample_rate	= 0,
++	.data		= NULL,
++	.add_to_buf	= NULL,
++	.rbuf		= &rbuf,
++	.set_use_inc	= set_use_inc,
++	.set_use_dec	= set_use_dec,
++	.fops		= &lirc_fops,
++	.dev		= NULL,
++	.owner		= THIS_MODULE,
++};
++
++static struct platform_driver lirc_rpi_driver = {
++	.driver = {
++		.name   = LIRC_DRIVER_NAME,
++		.owner  = THIS_MODULE,
++	},
++};
++
++static int __init lirc_rpi_init(void)
++{
++	int result;
++
++	/* Init read buffer. */
++	result = lirc_buffer_init(&rbuf, sizeof(int), RBUF_LEN);
++	if (result < 0)
++		return -ENOMEM;
++
++	result = platform_driver_register(&lirc_rpi_driver);
++	if (result) {
++		printk(KERN_ERR LIRC_DRIVER_NAME
++		       ": lirc register returned %d\n", result);
++		goto exit_buffer_free;
++	}
++
++	lirc_rpi_dev = platform_device_alloc(LIRC_DRIVER_NAME, 0);
++	if (!lirc_rpi_dev) {
++		result = -ENOMEM;
++		goto exit_driver_unregister;
++	}
++
++	result = platform_device_add(lirc_rpi_dev);
++	if (result)
++		goto exit_device_put;
++
++	return 0;
++
++	exit_device_put:
++	platform_device_put(lirc_rpi_dev);
++
++	exit_driver_unregister:
++	platform_driver_unregister(&lirc_rpi_driver);
++
++	exit_buffer_free:
++	lirc_buffer_free(&rbuf);
++
++	return result;
++}
++
++static void lirc_rpi_exit(void)
++{
++	platform_device_unregister(lirc_rpi_dev);
++	platform_driver_unregister(&lirc_rpi_driver);
++	lirc_buffer_free(&rbuf);
++}
++
++static int __init lirc_rpi_init_module(void)
++{
++	int result, i;
++
++	result = lirc_rpi_init();
++	if (result)
++		return result;
++
++	/* check if the module received valid gpio pin numbers */
++	result = 0;
++	if (gpio_in_pin != gpio_out_pin) {
++		for(i = 0; (i < ARRAY_SIZE(valid_gpio_pins)) && (result != 2); i++) {
++			if (gpio_in_pin == valid_gpio_pins[i] ||
++			   gpio_out_pin == valid_gpio_pins[i]) {
++				result++;
++			}
++		}
++	}
++
++	if (result != 2) {
++		result = -EINVAL;
++		printk(KERN_ERR LIRC_DRIVER_NAME
++		       ": invalid GPIO pin(s) specified!\n");
++		goto exit_rpi;
++	}
++
++	result = init_port();
++	if (result < 0)
++		goto exit_rpi;
++
++	driver.features = LIRC_CAN_SET_SEND_DUTY_CYCLE |
++			  LIRC_CAN_SET_SEND_CARRIER |
++			  LIRC_CAN_SEND_PULSE |
++			  LIRC_CAN_REC_MODE2;
++
++	driver.dev = &lirc_rpi_dev->dev;
++	driver.minor = lirc_register_driver(&driver);
++
++	if (driver.minor < 0) {
++		printk(KERN_ERR LIRC_DRIVER_NAME
++		       ": device registration failed with %d\n", result);
++		result = -EIO;
++		goto exit_rpi;
++	}
++
++	printk(KERN_INFO LIRC_DRIVER_NAME ": driver registered!\n");
++
++	return 0;
++
++	exit_rpi:
++	lirc_rpi_exit();
++
++	return result;
++}
++
++static void __exit lirc_rpi_exit_module(void)
++{
++	gpio_free(gpio_out_pin);
++	gpio_free(gpio_in_pin);
++
++	lirc_rpi_exit();
++
++	lirc_unregister_driver(driver.minor);
++	printk(KERN_INFO LIRC_DRIVER_NAME ": cleaned up module\n");
++}
++
++module_init(lirc_rpi_init_module);
++module_exit(lirc_rpi_exit_module);
++
++MODULE_DESCRIPTION("Infra-red receiver and blaster driver for Raspberry Pi GPIO.");
++MODULE_AUTHOR("Aron Robert Szabo <aron@reon.hu>");
++MODULE_AUTHOR("Michael Bishop <cleverca22@gmail.com>");
++MODULE_LICENSE("GPL");
++
++module_param(gpio_out_pin, int, S_IRUGO);
++MODULE_PARM_DESC(gpio_out_pin, "GPIO output/transmitter pin number of the BCM"
++		 " processor. Valid pin numbers are: 0, 1, 4, 8, 7, 9, 10, 11,"
++		 " 14, 15, 17, 18, 21, 22, 23, 24, 25, default 17");
++
++module_param(gpio_in_pin, int, S_IRUGO);
++MODULE_PARM_DESC(gpio_in_pin, "GPIO input pin number of the BCM processor."
++		 " Valid pin numbers are: 0, 1, 4, 8, 7, 9, 10, 11, 14, 15,"
++		 " 17, 18, 21, 22, 23, 24, 25, default 18");
++
++module_param(sense, int, S_IRUGO);
++MODULE_PARM_DESC(sense, "Override autodetection of IR receiver circuit"
++		 " (0 = active high, 1 = active low )");
++
++module_param(softcarrier, bool, S_IRUGO);
++MODULE_PARM_DESC(softcarrier, "Software carrier (0 = off, 1 = on, default on)");
++
++module_param(invert, bool, S_IRUGO);
++MODULE_PARM_DESC(invert, "Invert output (0 = off, 1 = on, default off");
++
++module_param(debug, bool, S_IRUGO | S_IWUSR);
++MODULE_PARM_DESC(debug, "Enable debugging messages");
+diff -Nur linux-3.12.6/drivers/staging/media/lirc/Makefile linux-raspberry-pi/drivers/staging/media/lirc/Makefile
+--- linux-3.12.6/drivers/staging/media/lirc/Makefile	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/staging/media/lirc/Makefile	2013-12-29 10:41:39.000000000 +0100
+@@ -7,6 +7,7 @@
+ obj-$(CONFIG_LIRC_IGORPLUGUSB)	+= lirc_igorplugusb.o
+ obj-$(CONFIG_LIRC_IMON)		+= lirc_imon.o
+ obj-$(CONFIG_LIRC_PARALLEL)	+= lirc_parallel.o
++obj-$(CONFIG_LIRC_RPI)		+= lirc_rpi.o
+ obj-$(CONFIG_LIRC_SASEM)	+= lirc_sasem.o
+ obj-$(CONFIG_LIRC_SERIAL)	+= lirc_serial.o
+ obj-$(CONFIG_LIRC_SIR)		+= lirc_sir.o
+diff -Nur linux-3.12.6/drivers/thermal/bcm2835-thermal.c linux-raspberry-pi/drivers/thermal/bcm2835-thermal.c
+--- linux-3.12.6/drivers/thermal/bcm2835-thermal.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/thermal/bcm2835-thermal.c	2013-12-29 10:41:40.000000000 +0100
+@@ -0,0 +1,184 @@
++/*****************************************************************************
++* Copyright 2011 Broadcom Corporation.  All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/slab.h>
++#include <linux/sysfs.h>
++#include <mach/vcio.h>
++#include <linux/thermal.h>
++
++
++/* --- DEFINITIONS --- */
++#define MODULE_NAME "bcm2835_thermal"
++
++/*#define THERMAL_DEBUG_ENABLE*/
++
++#ifdef THERMAL_DEBUG_ENABLE
++#define print_debug(fmt,...) printk(KERN_INFO "%s:%s:%d: "fmt"\n", MODULE_NAME, __func__, __LINE__, ##__VA_ARGS__)
++#else
++#define print_debug(fmt,...)
++#endif
++#define print_err(fmt,...) printk(KERN_ERR "%s:%s:%d: "fmt"\n", MODULE_NAME, __func__,__LINE__, ##__VA_ARGS__)
++
++#define VC_TAG_GET_TEMP 0x00030006
++#define VC_TAG_GET_MAX_TEMP 0x0003000A
++
++typedef enum {
++	TEMP,
++	MAX_TEMP,
++} temp_type;
++
++/* --- STRUCTS --- */
++/* tag part of the message */
++struct vc_msg_tag {
++	uint32_t tag_id;		/* the tag ID for the temperature */
++	uint32_t buffer_size;	/* size of the buffer (should be 8) */
++	uint32_t request_code;	/* identifies message as a request (should be 0) */
++	uint32_t id;			/* extra ID field (should be 0) */
++	uint32_t val;			/* returned value of the temperature */
++};
++
++/* message structure to be sent to videocore */
++struct vc_msg {
++	uint32_t msg_size;		/* simply, sizeof(struct vc_msg) */
++	uint32_t request_code;		/* holds various information like the success and number of bytes returned (refer to mailboxes wiki) */
++	struct vc_msg_tag tag;		/* the tag structure above to make */
++	uint32_t end_tag;		/* an end identifier, should be set to NULL */
++};
++
++struct bcm2835_thermal_data {
++	struct thermal_zone_device *thermal_dev;
++	struct vc_msg msg;
++};
++
++/* --- GLOBALS --- */
++static struct bcm2835_thermal_data bcm2835_data;
++
++/* Thermal Device Operations */
++static struct thermal_zone_device_ops ops;
++
++/* --- FUNCTIONS --- */
++
++static int bcm2835_get_temp_or_max(struct thermal_zone_device *thermal_dev, unsigned long *temp, unsigned tag_id)
++{
++	int result = -1, retry = 3;
++	print_debug("IN");
++
++	*temp = 0;
++	while (result != 0 && retry-- > 0) {
++		/* wipe all previous message data */
++		memset(&bcm2835_data.msg, 0, sizeof bcm2835_data.msg);
++
++		/* prepare message */
++		bcm2835_data.msg.msg_size = sizeof bcm2835_data.msg;
++		bcm2835_data.msg.tag.buffer_size = 8;
++		bcm2835_data.msg.tag.tag_id = tag_id;
++
++		/* send the message */
++		result = bcm_mailbox_property(&bcm2835_data.msg, sizeof bcm2835_data.msg);
++		print_debug("Got %stemperature as %u (%d,%x)\n", tag_id==VC_TAG_GET_MAX_TEMP ? "max ":"", (uint)bcm2835_data.msg.tag.val, result, bcm2835_data.msg.request_code);
++		if (!(bcm2835_data.msg.request_code & 0x80000000))
++			result = -1;
++	}
++
++	/* check if it was all ok and return the rate in milli degrees C */
++	if (result == 0)
++		*temp = (uint)bcm2835_data.msg.tag.val;
++	else
++		print_err("Failed to get temperature! (%x:%d)\n", tag_id, result);
++	print_debug("OUT");
++	return result;
++}
++
++static int bcm2835_get_temp(struct thermal_zone_device *thermal_dev, unsigned long *temp)
++{
++	return bcm2835_get_temp_or_max(thermal_dev, temp, VC_TAG_GET_TEMP);
++}
++
++static int bcm2835_get_max_temp(struct thermal_zone_device *thermal_dev, int trip_num, unsigned long *temp)
++{
++	return bcm2835_get_temp_or_max(thermal_dev, temp, VC_TAG_GET_MAX_TEMP);
++}
++
++static int bcm2835_get_trip_type(struct thermal_zone_device * thermal_dev, int trip_num, enum thermal_trip_type *trip_type)
++{
++	*trip_type = THERMAL_TRIP_HOT;
++	return 0;
++}
++
++
++static int bcm2835_get_mode(struct thermal_zone_device *thermal_dev, enum thermal_device_mode *dev_mode)
++{
++	*dev_mode = THERMAL_DEVICE_ENABLED;
++	return 0;
++}
++
++
++static int bcm2835_thermal_probe(struct platform_device *pdev)
++{
++	print_debug("IN");
++	print_debug("THERMAL Driver has been probed!");
++
++	/* check that the device isn't null!*/
++	if(pdev == NULL)
++	{
++		print_debug("Platform device is empty!");
++		return -ENODEV;
++	}
++
++	if(!(bcm2835_data.thermal_dev = thermal_zone_device_register("bcm2835_thermal",  1, 0, NULL, &ops, NULL, 0, 0)))
++	{
++		print_debug("Unable to register the thermal device!");
++		return -EFAULT;
++	}
++	return 0;
++}
++
++
++static int bcm2835_thermal_remove(struct platform_device *pdev)
++{
++	print_debug("IN");
++
++	thermal_zone_device_unregister(bcm2835_data.thermal_dev);
++
++	print_debug("OUT");
++
++	return 0;
++}
++
++static struct thermal_zone_device_ops ops  = {
++	.get_temp = bcm2835_get_temp,
++	.get_trip_temp = bcm2835_get_max_temp,
++	.get_trip_type = bcm2835_get_trip_type,
++	.get_mode = bcm2835_get_mode,
++};
++
++/* Thermal Driver */
++static struct platform_driver bcm2835_thermal_driver = {
++	.probe = bcm2835_thermal_probe,
++	.remove = bcm2835_thermal_remove,
++	.driver = {
++				.name = "bcm2835_thermal",
++				.owner = THIS_MODULE,
++			},
++};
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Dorian Peake");
++MODULE_DESCRIPTION("Thermal driver for bcm2835 chip");
++
++module_platform_driver(bcm2835_thermal_driver);
+diff -Nur linux-3.12.6/drivers/thermal/Kconfig linux-raspberry-pi/drivers/thermal/Kconfig
+--- linux-3.12.6/drivers/thermal/Kconfig	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/thermal/Kconfig	2013-12-29 10:41:40.000000000 +0100
+@@ -181,6 +181,12 @@
+ 	  enforce idle time which results in more package C-state residency. The
+ 	  user interface is exposed via generic thermal framework.
+ 
++config THERMAL_BCM2835
++	tristate "BCM2835 Thermal Driver"
++	help
++	  This will enable temperature monitoring for the Broadcom BCM2835
++	  chip. If built as a module, it will be called 'bcm2835-thermal'.
++
+ config X86_PKG_TEMP_THERMAL
+ 	tristate "X86 package temperature thermal driver"
+ 	depends on X86_THERMAL_VECTOR
+diff -Nur linux-3.12.6/drivers/thermal/Makefile linux-raspberry-pi/drivers/thermal/Makefile
+--- linux-3.12.6/drivers/thermal/Makefile	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/thermal/Makefile	2013-12-29 10:41:40.000000000 +0100
+@@ -27,5 +27,6 @@
+ obj-$(CONFIG_IMX_THERMAL)	+= imx_thermal.o
+ obj-$(CONFIG_DB8500_CPUFREQ_COOLING)	+= db8500_cpufreq_cooling.o
+ obj-$(CONFIG_INTEL_POWERCLAMP)	+= intel_powerclamp.o
++obj-$(CONFIG_THERMAL_BCM2835)	+= bcm2835-thermal.o
+ obj-$(CONFIG_X86_PKG_TEMP_THERMAL)	+= x86_pkg_temp_thermal.o
+ obj-$(CONFIG_TI_SOC_THERMAL)	+= ti-soc-thermal/
+diff -Nur linux-3.12.6/drivers/tty/serial/amba-pl011.c linux-raspberry-pi/drivers/tty/serial/amba-pl011.c
+--- linux-3.12.6/drivers/tty/serial/amba-pl011.c	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/tty/serial/amba-pl011.c	2013-12-29 10:41:40.000000000 +0100
+@@ -84,7 +84,7 @@
+ 
+ static unsigned int get_fifosize_arm(struct amba_device *dev)
+ {
+-	return amba_rev(dev) < 3 ? 16 : 32;
++	return 16; //TODO: fix: amba_rev(dev) < 3 ? 16 : 32;
+ }
+ 
+ static struct vendor_data vendor_arm = {
+diff -Nur linux-3.12.6/drivers/usb/core/generic.c linux-raspberry-pi/drivers/usb/core/generic.c
+--- linux-3.12.6/drivers/usb/core/generic.c	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/core/generic.c	2013-12-29 10:41:40.000000000 +0100
+@@ -152,6 +152,7 @@
+ 		dev_warn(&udev->dev,
+ 			"no configuration chosen from %d choice%s\n",
+ 			num_configs, plural(num_configs));
++		dev_warn(&udev->dev, "No support over %dmA\n", udev->bus_mA);
+ 	}
+ 	return i;
+ }
+diff -Nur linux-3.12.6/drivers/usb/core/message.c linux-raspberry-pi/drivers/usb/core/message.c
+--- linux-3.12.6/drivers/usb/core/message.c	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/core/message.c	2013-12-29 10:41:40.000000000 +0100
+@@ -1885,6 +1885,85 @@
+ 	if (cp->string == NULL &&
+ 			!(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS))
+ 		cp->string = usb_cache_string(dev, cp->desc.iConfiguration);
++/* Uncomment this define to enable the HS Electrical Test support */
++#define DWC_HS_ELECT_TST 1
++#ifdef DWC_HS_ELECT_TST
++		/* Here we implement the HS Electrical Test support. The
++		 * tester uses a vendor ID of 0x1A0A to indicate we should
++		 * run a special test sequence. The product ID tells us
++		 * which sequence to run. We invoke the test sequence by
++		 * sending a non-standard SetFeature command to our root
++		 * hub port. Our dwc_otg_hcd_hub_control() routine will
++		 * recognize the command and perform the desired test
++		 * sequence.
++		 */
++		if (dev->descriptor.idVendor == 0x1A0A) {
++			/* HSOTG Electrical Test */
++			dev_warn(&dev->dev, "VID from HSOTG Electrical Test Fixture\n");
++
++			if (dev->bus && dev->bus->root_hub) {
++				struct usb_device *hdev = dev->bus->root_hub;
++				dev_warn(&dev->dev, "Got PID 0x%x\n", dev->descriptor.idProduct);
++
++				switch (dev->descriptor.idProduct) {
++				case 0x0101:	/* TEST_SE0_NAK */
++					dev_warn(&dev->dev, "TEST_SE0_NAK\n");
++					usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
++							USB_REQ_SET_FEATURE, USB_RT_PORT,
++							USB_PORT_FEAT_TEST, 0x300, NULL, 0, HZ);
++					break;
++
++				case 0x0102:	/* TEST_J */
++					dev_warn(&dev->dev, "TEST_J\n");
++					usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
++							USB_REQ_SET_FEATURE, USB_RT_PORT,
++							USB_PORT_FEAT_TEST, 0x100, NULL, 0, HZ);
++					break;
++
++				case 0x0103:	/* TEST_K */
++					dev_warn(&dev->dev, "TEST_K\n");
++					usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
++							USB_REQ_SET_FEATURE, USB_RT_PORT,
++							USB_PORT_FEAT_TEST, 0x200, NULL, 0, HZ);
++					break;
++
++				case 0x0104:	/* TEST_PACKET */
++					dev_warn(&dev->dev, "TEST_PACKET\n");
++					usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
++							USB_REQ_SET_FEATURE, USB_RT_PORT,
++							USB_PORT_FEAT_TEST, 0x400, NULL, 0, HZ);
++					break;
++
++				case 0x0105:	/* TEST_FORCE_ENABLE */
++					dev_warn(&dev->dev, "TEST_FORCE_ENABLE\n");
++					usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
++							USB_REQ_SET_FEATURE, USB_RT_PORT,
++							USB_PORT_FEAT_TEST, 0x500, NULL, 0, HZ);
++					break;
++
++				case 0x0106:	/* HS_HOST_PORT_SUSPEND_RESUME */
++					dev_warn(&dev->dev, "HS_HOST_PORT_SUSPEND_RESUME\n");
++					usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
++							USB_REQ_SET_FEATURE, USB_RT_PORT,
++							USB_PORT_FEAT_TEST, 0x600, NULL, 0, 40 * HZ);
++					break;
++
++				case 0x0107:	/* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */
++					dev_warn(&dev->dev, "SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup\n");
++					usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
++							USB_REQ_SET_FEATURE, USB_RT_PORT,
++							USB_PORT_FEAT_TEST, 0x700, NULL, 0, 40 * HZ);
++					break;
++
++				case 0x0108:	/* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */
++					dev_warn(&dev->dev, "SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute\n");
++					usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
++							USB_REQ_SET_FEATURE, USB_RT_PORT,
++							USB_PORT_FEAT_TEST, 0x800, NULL, 0, 40 * HZ);
++				}
++			}
++		}
++#endif /* DWC_HS_ELECT_TST */
+ 
+ 	/* Now that the interfaces are installed, re-enable LPM. */
+ 	usb_unlocked_enable_lpm(dev);
+diff -Nur linux-3.12.6/drivers/usb/core/otg_whitelist.h linux-raspberry-pi/drivers/usb/core/otg_whitelist.h
+--- linux-3.12.6/drivers/usb/core/otg_whitelist.h	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/core/otg_whitelist.h	2013-12-29 10:41:40.000000000 +0100
+@@ -19,33 +19,82 @@
+ static struct usb_device_id whitelist_table [] = {
+ 
+ /* hubs are optional in OTG, but very handy ... */
++#define CERT_WITHOUT_HUBS
++#if defined(CERT_WITHOUT_HUBS)
++{ USB_DEVICE( 0x0000, 0x0000 ), }, /* Root HUB Only*/
++#else
+ { USB_DEVICE_INFO(USB_CLASS_HUB, 0, 0), },
+ { USB_DEVICE_INFO(USB_CLASS_HUB, 0, 1), },
++{ USB_DEVICE_INFO(USB_CLASS_HUB, 0, 2), },
++#endif
+ 
+ #ifdef	CONFIG_USB_PRINTER		/* ignoring nonstatic linkage! */
+ /* FIXME actually, printers are NOT supposed to use device classes;
+  * they're supposed to use interface classes...
+  */
+-{ USB_DEVICE_INFO(7, 1, 1) },
+-{ USB_DEVICE_INFO(7, 1, 2) },
+-{ USB_DEVICE_INFO(7, 1, 3) },
++//{ USB_DEVICE_INFO(7, 1, 1) },
++//{ USB_DEVICE_INFO(7, 1, 2) },
++//{ USB_DEVICE_INFO(7, 1, 3) },
+ #endif
+ 
+ #ifdef	CONFIG_USB_NET_CDCETHER
+ /* Linux-USB CDC Ethernet gadget */
+-{ USB_DEVICE(0x0525, 0xa4a1), },
++//{ USB_DEVICE(0x0525, 0xa4a1), },
+ /* Linux-USB CDC Ethernet + RNDIS gadget */
+-{ USB_DEVICE(0x0525, 0xa4a2), },
++//{ USB_DEVICE(0x0525, 0xa4a2), },
+ #endif
+ 
+ #if	defined(CONFIG_USB_TEST) || defined(CONFIG_USB_TEST_MODULE)
+ /* gadget zero, for testing */
+-{ USB_DEVICE(0x0525, 0xa4a0), },
++//{ USB_DEVICE(0x0525, 0xa4a0), },
+ #endif
+ 
++/* OPT Tester */
++{ USB_DEVICE( 0x1a0a, 0x0101 ), }, /* TEST_SE0_NAK */
++{ USB_DEVICE( 0x1a0a, 0x0102 ), }, /* Test_J */
++{ USB_DEVICE( 0x1a0a, 0x0103 ), }, /* Test_K */
++{ USB_DEVICE( 0x1a0a, 0x0104 ), }, /* Test_PACKET */
++{ USB_DEVICE( 0x1a0a, 0x0105 ), }, /* Test_FORCE_ENABLE */
++{ USB_DEVICE( 0x1a0a, 0x0106 ), }, /* HS_PORT_SUSPEND_RESUME  */
++{ USB_DEVICE( 0x1a0a, 0x0107 ), }, /* SINGLE_STEP_GET_DESCRIPTOR setup */
++{ USB_DEVICE( 0x1a0a, 0x0108 ), }, /* SINGLE_STEP_GET_DESCRIPTOR execute */
++
++/* Sony cameras */
++{ USB_DEVICE_VER(0x054c,0x0010,0x0410, 0x0500), },
++
++/* Memory Devices */
++//{ USB_DEVICE( 0x0781, 0x5150 ), }, /* SanDisk */
++//{ USB_DEVICE( 0x05DC, 0x0080 ), }, /* Lexar */
++//{ USB_DEVICE( 0x4146, 0x9281 ), }, /* IOMEGA */
++//{ USB_DEVICE( 0x067b, 0x2507 ), }, /* Hammer 20GB External HD  */
++{ USB_DEVICE( 0x0EA0, 0x2168 ), }, /* Ours Technology Inc. (BUFFALO ClipDrive)*/
++//{ USB_DEVICE( 0x0457, 0x0150 ), }, /* Silicon Integrated Systems Corp. */
++
++/* HP Printers */
++//{ USB_DEVICE( 0x03F0, 0x1102 ), }, /* HP Photosmart 245 */
++//{ USB_DEVICE( 0x03F0, 0x1302 ), }, /* HP Photosmart 370 Series */
++
++/* Speakers */
++//{ USB_DEVICE( 0x0499, 0x3002 ), }, /* YAMAHA YST-MS35D USB Speakers */
++//{ USB_DEVICE( 0x0672, 0x1041 ), }, /* Labtec USB Headset */
++
+ { }	/* Terminating entry */
+ };
+ 
++static inline void report_errors(struct usb_device *dev)
++{
++	/* OTG MESSAGE: report errors here, customize to match your product */
++	dev_info(&dev->dev, "device Vendor:%04x Product:%04x is not supported\n",
++		 le16_to_cpu(dev->descriptor.idVendor),
++		 le16_to_cpu(dev->descriptor.idProduct));
++        if (USB_CLASS_HUB == dev->descriptor.bDeviceClass){
++                dev_printk(KERN_CRIT, &dev->dev, "Unsupported Hub Topology\n");
++        } else {
++                dev_printk(KERN_CRIT, &dev->dev, "Attached Device is not Supported\n");
++        }
++}
++
++
+ static int is_targeted(struct usb_device *dev)
+ {
+ 	struct usb_device_id	*id = whitelist_table;
+@@ -55,58 +104,83 @@
+ 		return 1;
+ 
+ 	/* HNP test device is _never_ targeted (see OTG spec 6.6.6) */
+-	if ((le16_to_cpu(dev->descriptor.idVendor) == 0x1a0a &&
+-	     le16_to_cpu(dev->descriptor.idProduct) == 0xbadd))
+-		return 0;
++	if (dev->descriptor.idVendor == 0x1a0a &&
++            dev->descriptor.idProduct == 0xbadd) {
++                return 0;
++	} else if (!enable_whitelist) {
++		return 1;
++        } else {
+ 
+-	/* NOTE: can't use usb_match_id() since interface caches
+-	 * aren't set up yet. this is cut/paste from that code.
+-	 */
+-	for (id = whitelist_table; id->match_flags; id++) {
+-		if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
+-		    id->idVendor != le16_to_cpu(dev->descriptor.idVendor))
+-			continue;
+-
+-		if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) &&
+-		    id->idProduct != le16_to_cpu(dev->descriptor.idProduct))
+-			continue;
+-
+-		/* No need to test id->bcdDevice_lo != 0, since 0 is never
+-		   greater than any unsigned number. */
+-		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) &&
+-		    (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice)))
+-			continue;
+-
+-		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) &&
+-		    (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice)))
+-			continue;
+-
+-		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) &&
+-		    (id->bDeviceClass != dev->descriptor.bDeviceClass))
+-			continue;
+-
+-		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) &&
+-		    (id->bDeviceSubClass != dev->descriptor.bDeviceSubClass))
+-			continue;
+-
+-		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) &&
+-		    (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol))
+-			continue;
++#ifdef DEBUG
++                dev_dbg(&dev->dev, "device V:%04x P:%04x DC:%04x SC:%04x PR:%04x \n",
++                        dev->descriptor.idVendor,
++                        dev->descriptor.idProduct,
++                        dev->descriptor.bDeviceClass,
++                        dev->descriptor.bDeviceSubClass,
++                        dev->descriptor.bDeviceProtocol);
++#endif
+ 
+ 		return 1;
++		/* NOTE: can't use usb_match_id() since interface caches
++		 * aren't set up yet. this is cut/paste from that code.
++		 */
++		for (id = whitelist_table; id->match_flags; id++) {
++#ifdef DEBUG
++			dev_dbg(&dev->dev,
++				"ID: V:%04x P:%04x DC:%04x SC:%04x PR:%04x \n",
++				id->idVendor,
++				id->idProduct,
++				id->bDeviceClass,
++				id->bDeviceSubClass,
++				id->bDeviceProtocol);
++#endif
++
++			if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
++			    id->idVendor != le16_to_cpu(dev->descriptor.idVendor))
++				continue;
++
++			if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) &&
++			    id->idProduct != le16_to_cpu(dev->descriptor.idProduct))
++				continue;
++
++			/* No need to test id->bcdDevice_lo != 0, since 0 is never
++			   greater than any unsigned number. */
++			if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) &&
++			    (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice)))
++				continue;
++
++			if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) &&
++			    (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice)))
++				continue;
++
++			if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) &&
++			    (id->bDeviceClass != dev->descriptor.bDeviceClass))
++				continue;
++
++			if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) &&
++			    (id->bDeviceSubClass != dev->descriptor.bDeviceSubClass))
++				continue;
++
++			if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) &&
++			    (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol))
++				continue;
++
++			return 1;
++		}
+ 	}
+ 
+ 	/* add other match criteria here ... */
+ 
+-
+-	/* OTG MESSAGE: report errors here, customize to match your product */
+-	dev_err(&dev->dev, "device v%04x p%04x is not supported\n",
+-		le16_to_cpu(dev->descriptor.idVendor),
+-		le16_to_cpu(dev->descriptor.idProduct));
+ #ifdef	CONFIG_USB_OTG_WHITELIST
++	report_errors(dev);
+ 	return 0;
+ #else
+-	return 1;
++	if (enable_whitelist) {
++		report_errors(dev);
++		return 0;
++	} else {
++		return 1;
++	}
+ #endif
+ }
+ 
+diff -Nur linux-3.12.6/drivers/usb/gadget/file_storage.c linux-raspberry-pi/drivers/usb/gadget/file_storage.c
+--- linux-3.12.6/drivers/usb/gadget/file_storage.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/gadget/file_storage.c	2013-12-29 10:41:40.000000000 +0100
+@@ -0,0 +1,3676 @@
++/*
++ * file_storage.c -- File-backed USB Storage Gadget, for USB development
++ *
++ * Copyright (C) 2003-2008 Alan Stern
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") as published by the Free Software
++ * Foundation, either version 2 of that License or (at your option) any
++ * later version.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++
++/*
++ * The File-backed Storage Gadget acts as a USB Mass Storage device,
++ * appearing to the host as a disk drive or as a CD-ROM drive.  In addition
++ * to providing an example of a genuinely useful gadget driver for a USB
++ * device, it also illustrates a technique of double-buffering for increased
++ * throughput.  Last but not least, it gives an easy way to probe the
++ * behavior of the Mass Storage drivers in a USB host.
++ *
++ * Backing storage is provided by a regular file or a block device, specified
++ * by the "file" module parameter.  Access can be limited to read-only by
++ * setting the optional "ro" module parameter.  (For CD-ROM emulation,
++ * access is always read-only.)  The gadget will indicate that it has
++ * removable media if the optional "removable" module parameter is set.
++ *
++ * The gadget supports the Control-Bulk (CB), Control-Bulk-Interrupt (CBI),
++ * and Bulk-Only (also known as Bulk-Bulk-Bulk or BBB) transports, selected
++ * by the optional "transport" module parameter.  It also supports the
++ * following protocols: RBC (0x01), ATAPI or SFF-8020i (0x02), QIC-157 (0c03),
++ * UFI (0x04), SFF-8070i (0x05), and transparent SCSI (0x06), selected by
++ * the optional "protocol" module parameter.  In addition, the default
++ * Vendor ID, Product ID, release number and serial number can be overridden.
++ *
++ * There is support for multiple logical units (LUNs), each of which has
++ * its own backing file.  The number of LUNs can be set using the optional
++ * "luns" module parameter (anywhere from 1 to 8), and the corresponding
++ * files are specified using comma-separated lists for "file" and "ro".
++ * The default number of LUNs is taken from the number of "file" elements;
++ * it is 1 if "file" is not given.  If "removable" is not set then a backing
++ * file must be specified for each LUN.  If it is set, then an unspecified
++ * or empty backing filename means the LUN's medium is not loaded.  Ideally
++ * each LUN would be settable independently as a disk drive or a CD-ROM
++ * drive, but currently all LUNs have to be the same type.  The CD-ROM
++ * emulation includes a single data track and no audio tracks; hence there
++ * need be only one backing file per LUN.
++ *
++ * Requirements are modest; only a bulk-in and a bulk-out endpoint are
++ * needed (an interrupt-out endpoint is also needed for CBI).  The memory
++ * requirement amounts to two 16K buffers, size configurable by a parameter.
++ * Support is included for both full-speed and high-speed operation.
++ *
++ * Note that the driver is slightly non-portable in that it assumes a
++ * single memory/DMA buffer will be useable for bulk-in, bulk-out, and
++ * interrupt-in endpoints.  With most device controllers this isn't an
++ * issue, but there may be some with hardware restrictions that prevent
++ * a buffer from being used by more than one endpoint.
++ *
++ * Module options:
++ *
++ *	file=filename[,filename...]
++ *				Required if "removable" is not set, names of
++ *					the files or block devices used for
++ *					backing storage
++ *	serial=HHHH...		Required serial number (string of hex chars)
++ *	ro=b[,b...]		Default false, booleans for read-only access
++ *	removable		Default false, boolean for removable media
++ *	luns=N			Default N = number of filenames, number of
++ *					LUNs to support
++ *	nofua=b[,b...]		Default false, booleans for ignore FUA flag
++ *					in SCSI WRITE(10,12) commands
++ *	stall			Default determined according to the type of
++ *					USB device controller (usually true),
++ *					boolean to permit the driver to halt
++ *					bulk endpoints
++ *	cdrom			Default false, boolean for whether to emulate
++ *					a CD-ROM drive
++ *	transport=XXX		Default BBB, transport name (CB, CBI, or BBB)
++ *	protocol=YYY		Default SCSI, protocol name (RBC, 8020 or
++ *					ATAPI, QIC, UFI, 8070, or SCSI;
++ *					also 1 - 6)
++ *	vendor=0xVVVV		Default 0x0525 (NetChip), USB Vendor ID
++ *	product=0xPPPP		Default 0xa4a5 (FSG), USB Product ID
++ *	release=0xRRRR		Override the USB release number (bcdDevice)
++ *	buflen=N		Default N=16384, buffer size used (will be
++ *					rounded down to a multiple of
++ *					PAGE_CACHE_SIZE)
++ *
++ * If CONFIG_USB_FILE_STORAGE_TEST is not set, only the "file", "serial", "ro",
++ * "removable", "luns", "nofua", "stall", and "cdrom" options are available;
++ * default values are used for everything else.
++ *
++ * The pathnames of the backing files and the ro settings are available in
++ * the attribute files "file", "nofua", and "ro" in the lun<n> subdirectory of
++ * the gadget's sysfs directory.  If the "removable" option is set, writing to
++ * these files will simulate ejecting/loading the medium (writing an empty
++ * line means eject) and adjusting a write-enable tab.  Changes to the ro
++ * setting are not allowed when the medium is loaded or if CD-ROM emulation
++ * is being used.
++ *
++ * This gadget driver is heavily based on "Gadget Zero" by David Brownell.
++ * The driver's SCSI command interface was based on the "Information
++ * technology - Small Computer System Interface - 2" document from
++ * X3T9.2 Project 375D, Revision 10L, 7-SEP-93, available at
++ * <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>.  The single exception
++ * is opcode 0x23 (READ FORMAT CAPACITIES), which was based on the
++ * "Universal Serial Bus Mass Storage Class UFI Command Specification"
++ * document, Revision 1.0, December 14, 1998, available at
++ * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
++ */
++
++
++/*
++ *				Driver Design
++ *
++ * The FSG driver is fairly straightforward.  There is a main kernel
++ * thread that handles most of the work.  Interrupt routines field
++ * callbacks from the controller driver: bulk- and interrupt-request
++ * completion notifications, endpoint-0 events, and disconnect events.
++ * Completion events are passed to the main thread by wakeup calls.  Many
++ * ep0 requests are handled at interrupt time, but SetInterface,
++ * SetConfiguration, and device reset requests are forwarded to the
++ * thread in the form of "exceptions" using SIGUSR1 signals (since they
++ * should interrupt any ongoing file I/O operations).
++ *
++ * The thread's main routine implements the standard command/data/status
++ * parts of a SCSI interaction.  It and its subroutines are full of tests
++ * for pending signals/exceptions -- all this polling is necessary since
++ * the kernel has no setjmp/longjmp equivalents.  (Maybe this is an
++ * indication that the driver really wants to be running in userspace.)
++ * An important point is that so long as the thread is alive it keeps an
++ * open reference to the backing file.  This will prevent unmounting
++ * the backing file's underlying filesystem and could cause problems
++ * during system shutdown, for example.  To prevent such problems, the
++ * thread catches INT, TERM, and KILL signals and converts them into
++ * an EXIT exception.
++ *
++ * In normal operation the main thread is started during the gadget's
++ * fsg_bind() callback and stopped during fsg_unbind().  But it can also
++ * exit when it receives a signal, and there's no point leaving the
++ * gadget running when the thread is dead.  So just before the thread
++ * exits, it deregisters the gadget driver.  This makes things a little
++ * tricky: The driver is deregistered at two places, and the exiting
++ * thread can indirectly call fsg_unbind() which in turn can tell the
++ * thread to exit.  The first problem is resolved through the use of the
++ * REGISTERED atomic bitflag; the driver will only be deregistered once.
++ * The second problem is resolved by having fsg_unbind() check
++ * fsg->state; it won't try to stop the thread if the state is already
++ * FSG_STATE_TERMINATED.
++ *
++ * To provide maximum throughput, the driver uses a circular pipeline of
++ * buffer heads (struct fsg_buffhd).  In principle the pipeline can be
++ * arbitrarily long; in practice the benefits don't justify having more
++ * than 2 stages (i.e., double buffering).  But it helps to think of the
++ * pipeline as being a long one.  Each buffer head contains a bulk-in and
++ * a bulk-out request pointer (since the buffer can be used for both
++ * output and input -- directions always are given from the host's
++ * point of view) as well as a pointer to the buffer and various state
++ * variables.
++ *
++ * Use of the pipeline follows a simple protocol.  There is a variable
++ * (fsg->next_buffhd_to_fill) that points to the next buffer head to use.
++ * At any time that buffer head may still be in use from an earlier
++ * request, so each buffer head has a state variable indicating whether
++ * it is EMPTY, FULL, or BUSY.  Typical use involves waiting for the
++ * buffer head to be EMPTY, filling the buffer either by file I/O or by
++ * USB I/O (during which the buffer head is BUSY), and marking the buffer
++ * head FULL when the I/O is complete.  Then the buffer will be emptied
++ * (again possibly by USB I/O, during which it is marked BUSY) and
++ * finally marked EMPTY again (possibly by a completion routine).
++ *
++ * A module parameter tells the driver to avoid stalling the bulk
++ * endpoints wherever the transport specification allows.  This is
++ * necessary for some UDCs like the SuperH, which cannot reliably clear a
++ * halt on a bulk endpoint.  However, under certain circumstances the
++ * Bulk-only specification requires a stall.  In such cases the driver
++ * will halt the endpoint and set a flag indicating that it should clear
++ * the halt in software during the next device reset.  Hopefully this
++ * will permit everything to work correctly.  Furthermore, although the
++ * specification allows the bulk-out endpoint to halt when the host sends
++ * too much data, implementing this would cause an unavoidable race.
++ * The driver will always use the "no-stall" approach for OUT transfers.
++ *
++ * One subtle point concerns sending status-stage responses for ep0
++ * requests.  Some of these requests, such as device reset, can involve
++ * interrupting an ongoing file I/O operation, which might take an
++ * arbitrarily long time.  During that delay the host might give up on
++ * the original ep0 request and issue a new one.  When that happens the
++ * driver should not notify the host about completion of the original
++ * request, as the host will no longer be waiting for it.  So the driver
++ * assigns to each ep0 request a unique tag, and it keeps track of the
++ * tag value of the request associated with a long-running exception
++ * (device-reset, interface-change, or configuration-change).  When the
++ * exception handler is finished, the status-stage response is submitted
++ * only if the current ep0 request tag is equal to the exception request
++ * tag.  Thus only the most recently received ep0 request will get a
++ * status-stage response.
++ *
++ * Warning: This driver source file is too long.  It ought to be split up
++ * into a header file plus about 3 separate .c files, to handle the details
++ * of the Gadget, USB Mass Storage, and SCSI protocols.
++ */
++
++
++/* #define VERBOSE_DEBUG */
++/* #define DUMP_MSGS */
++
++
++#include <linux/blkdev.h>
++#include <linux/completion.h>
++#include <linux/dcache.h>
++#include <linux/delay.h>
++#include <linux/device.h>
++#include <linux/fcntl.h>
++#include <linux/file.h>
++#include <linux/fs.h>
++#include <linux/kref.h>
++#include <linux/kthread.h>
++#include <linux/limits.h>
++#include <linux/module.h>
++#include <linux/rwsem.h>
++#include <linux/slab.h>
++#include <linux/spinlock.h>
++#include <linux/string.h>
++#include <linux/freezer.h>
++#include <linux/utsname.h>
++
++#include <linux/usb/ch9.h>
++#include <linux/usb/gadget.h>
++
++#include "gadget_chips.h"
++
++
++
++/*
++ * Kbuild is not very cooperative with respect to linking separately
++ * compiled library objects into one module.  So for now we won't use
++ * separate compilation ... ensuring init/exit sections work to shrink
++ * the runtime footprint, and giving us at least some parts of what
++ * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
++ */
++#include "usbstring.c"
++#include "config.c"
++#include "epautoconf.c"
++
++/*-------------------------------------------------------------------------*/
++
++#define DRIVER_DESC		"File-backed Storage Gadget"
++#define DRIVER_NAME		"g_file_storage"
++#define DRIVER_VERSION		"1 September 2010"
++
++static       char fsg_string_manufacturer[64];
++static const char fsg_string_product[] = DRIVER_DESC;
++static const char fsg_string_config[] = "Self-powered";
++static const char fsg_string_interface[] = "Mass Storage";
++
++
++#include "storage_common.c"
++
++
++MODULE_DESCRIPTION(DRIVER_DESC);
++MODULE_AUTHOR("Alan Stern");
++MODULE_LICENSE("Dual BSD/GPL");
++
++/*
++ * This driver assumes self-powered hardware and has no way for users to
++ * trigger remote wakeup.  It uses autoconfiguration to select endpoints
++ * and endpoint addresses.
++ */
++
++
++/*-------------------------------------------------------------------------*/
++
++
++/* Encapsulate the module parameter settings */
++
++static struct {
++	char		*file[FSG_MAX_LUNS];
++	char		*serial;
++	bool		ro[FSG_MAX_LUNS];
++	bool		nofua[FSG_MAX_LUNS];
++	unsigned int	num_filenames;
++	unsigned int	num_ros;
++	unsigned int	num_nofuas;
++	unsigned int	nluns;
++
++	bool		removable;
++	bool		can_stall;
++	bool		cdrom;
++
++	char		*transport_parm;
++	char		*protocol_parm;
++	unsigned short	vendor;
++	unsigned short	product;
++	unsigned short	release;
++	unsigned int	buflen;
++
++	int		transport_type;
++	char		*transport_name;
++	int		protocol_type;
++	char		*protocol_name;
++
++} mod_data = {					// Default values
++	.transport_parm		= "BBB",
++	.protocol_parm		= "SCSI",
++	.removable		= 0,
++	.can_stall		= 1,
++	.cdrom			= 0,
++	.vendor			= FSG_VENDOR_ID,
++	.product		= FSG_PRODUCT_ID,
++	.release		= 0xffff,	// Use controller chip type
++	.buflen			= 16384,
++	};
++
++
++module_param_array_named(file, mod_data.file, charp, &mod_data.num_filenames,
++		S_IRUGO);
++MODULE_PARM_DESC(file, "names of backing files or devices");
++
++module_param_named(serial, mod_data.serial, charp, S_IRUGO);
++MODULE_PARM_DESC(serial, "USB serial number");
++
++module_param_array_named(ro, mod_data.ro, bool, &mod_data.num_ros, S_IRUGO);
++MODULE_PARM_DESC(ro, "true to force read-only");
++
++module_param_array_named(nofua, mod_data.nofua, bool, &mod_data.num_nofuas,
++		S_IRUGO);
++MODULE_PARM_DESC(nofua, "true to ignore SCSI WRITE(10,12) FUA bit");
++
++module_param_named(luns, mod_data.nluns, uint, S_IRUGO);
++MODULE_PARM_DESC(luns, "number of LUNs");
++
++module_param_named(removable, mod_data.removable, bool, S_IRUGO);
++MODULE_PARM_DESC(removable, "true to simulate removable media");
++
++module_param_named(stall, mod_data.can_stall, bool, S_IRUGO);
++MODULE_PARM_DESC(stall, "false to prevent bulk stalls");
++
++module_param_named(cdrom, mod_data.cdrom, bool, S_IRUGO);
++MODULE_PARM_DESC(cdrom, "true to emulate cdrom instead of disk");
++
++/* In the non-TEST version, only the module parameters listed above
++ * are available. */
++#ifdef CONFIG_USB_FILE_STORAGE_TEST
++
++module_param_named(transport, mod_data.transport_parm, charp, S_IRUGO);
++MODULE_PARM_DESC(transport, "type of transport (BBB, CBI, or CB)");
++
++module_param_named(protocol, mod_data.protocol_parm, charp, S_IRUGO);
++MODULE_PARM_DESC(protocol, "type of protocol (RBC, 8020, QIC, UFI, "
++		"8070, or SCSI)");
++
++module_param_named(vendor, mod_data.vendor, ushort, S_IRUGO);
++MODULE_PARM_DESC(vendor, "USB Vendor ID");
++
++module_param_named(product, mod_data.product, ushort, S_IRUGO);
++MODULE_PARM_DESC(product, "USB Product ID");
++
++module_param_named(release, mod_data.release, ushort, S_IRUGO);
++MODULE_PARM_DESC(release, "USB release number");
++
++module_param_named(buflen, mod_data.buflen, uint, S_IRUGO);
++MODULE_PARM_DESC(buflen, "I/O buffer size");
++
++#endif /* CONFIG_USB_FILE_STORAGE_TEST */
++
++
++/*
++ * These definitions will permit the compiler to avoid generating code for
++ * parts of the driver that aren't used in the non-TEST version.  Even gcc
++ * can recognize when a test of a constant expression yields a dead code
++ * path.
++ */
++
++#ifdef CONFIG_USB_FILE_STORAGE_TEST
++
++#define transport_is_bbb()	(mod_data.transport_type == USB_PR_BULK)
++#define transport_is_cbi()	(mod_data.transport_type == USB_PR_CBI)
++#define protocol_is_scsi()	(mod_data.protocol_type == USB_SC_SCSI)
++
++#else
++
++#define transport_is_bbb()	1
++#define transport_is_cbi()	0
++#define protocol_is_scsi()	1
++
++#endif /* CONFIG_USB_FILE_STORAGE_TEST */
++
++
++/*-------------------------------------------------------------------------*/
++
++
++struct fsg_dev {
++	/* lock protects: state, all the req_busy's, and cbbuf_cmnd */
++	spinlock_t		lock;
++	struct usb_gadget	*gadget;
++
++	/* filesem protects: backing files in use */
++	struct rw_semaphore	filesem;
++
++	/* reference counting: wait until all LUNs are released */
++	struct kref		ref;
++
++	struct usb_ep		*ep0;		// Handy copy of gadget->ep0
++	struct usb_request	*ep0req;	// For control responses
++	unsigned int		ep0_req_tag;
++	const char		*ep0req_name;
++
++	struct usb_request	*intreq;	// For interrupt responses
++	int			intreq_busy;
++	struct fsg_buffhd	*intr_buffhd;
++
++	unsigned int		bulk_out_maxpacket;
++	enum fsg_state		state;		// For exception handling
++	unsigned int		exception_req_tag;
++
++	u8			config, new_config;
++
++	unsigned int		running : 1;
++	unsigned int		bulk_in_enabled : 1;
++	unsigned int		bulk_out_enabled : 1;
++	unsigned int		intr_in_enabled : 1;
++	unsigned int		phase_error : 1;
++	unsigned int		short_packet_received : 1;
++	unsigned int		bad_lun_okay : 1;
++
++	unsigned long		atomic_bitflags;
++#define REGISTERED		0
++#define IGNORE_BULK_OUT		1
++#define SUSPENDED		2
++
++	struct usb_ep		*bulk_in;
++	struct usb_ep		*bulk_out;
++	struct usb_ep		*intr_in;
++
++	struct fsg_buffhd	*next_buffhd_to_fill;
++	struct fsg_buffhd	*next_buffhd_to_drain;
++
++	int			thread_wakeup_needed;
++	struct completion	thread_notifier;
++	struct task_struct	*thread_task;
++
++	int			cmnd_size;
++	u8			cmnd[MAX_COMMAND_SIZE];
++	enum data_direction	data_dir;
++	u32			data_size;
++	u32			data_size_from_cmnd;
++	u32			tag;
++	unsigned int		lun;
++	u32			residue;
++	u32			usb_amount_left;
++
++	/* The CB protocol offers no way for a host to know when a command
++	 * has completed.  As a result the next command may arrive early,
++	 * and we will still have to handle it.  For that reason we need
++	 * a buffer to store new commands when using CB (or CBI, which
++	 * does not oblige a host to wait for command completion either). */
++	int			cbbuf_cmnd_size;
++	u8			cbbuf_cmnd[MAX_COMMAND_SIZE];
++
++	unsigned int		nluns;
++	struct fsg_lun		*luns;
++	struct fsg_lun		*curlun;
++	/* Must be the last entry */
++	struct fsg_buffhd	buffhds[];
++};
++
++typedef void (*fsg_routine_t)(struct fsg_dev *);
++
++static int exception_in_progress(struct fsg_dev *fsg)
++{
++	return (fsg->state > FSG_STATE_IDLE);
++}
++
++/* Make bulk-out requests be divisible by the maxpacket size */
++static void set_bulk_out_req_length(struct fsg_dev *fsg,
++		struct fsg_buffhd *bh, unsigned int length)
++{
++	unsigned int	rem;
++
++	bh->bulk_out_intended_length = length;
++	rem = length % fsg->bulk_out_maxpacket;
++	if (rem > 0)
++		length += fsg->bulk_out_maxpacket - rem;
++	bh->outreq->length = length;
++}
++
++static struct fsg_dev			*the_fsg;
++static struct usb_gadget_driver		fsg_driver;
++
++
++/*-------------------------------------------------------------------------*/
++
++static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
++{
++	const char	*name;
++
++	if (ep == fsg->bulk_in)
++		name = "bulk-in";
++	else if (ep == fsg->bulk_out)
++		name = "bulk-out";
++	else
++		name = ep->name;
++	DBG(fsg, "%s set halt\n", name);
++	return usb_ep_set_halt(ep);
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * DESCRIPTORS ... most are static, but strings and (full) configuration
++ * descriptors are built on demand.  Also the (static) config and interface
++ * descriptors are adjusted during fsg_bind().
++ */
++
++/* There is only one configuration. */
++#define	CONFIG_VALUE		1
++
++static struct usb_device_descriptor
++device_desc = {
++	.bLength =		sizeof device_desc,
++	.bDescriptorType =	USB_DT_DEVICE,
++
++	.bcdUSB =		cpu_to_le16(0x0200),
++	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
++
++	/* The next three values can be overridden by module parameters */
++	.idVendor =		cpu_to_le16(FSG_VENDOR_ID),
++	.idProduct =		cpu_to_le16(FSG_PRODUCT_ID),
++	.bcdDevice =		cpu_to_le16(0xffff),
++
++	.iManufacturer =	FSG_STRING_MANUFACTURER,
++	.iProduct =		FSG_STRING_PRODUCT,
++	.iSerialNumber =	FSG_STRING_SERIAL,
++	.bNumConfigurations =	1,
++};
++
++static struct usb_config_descriptor
++config_desc = {
++	.bLength =		sizeof config_desc,
++	.bDescriptorType =	USB_DT_CONFIG,
++
++	/* wTotalLength computed by usb_gadget_config_buf() */
++	.bNumInterfaces =	1,
++	.bConfigurationValue =	CONFIG_VALUE,
++	.iConfiguration =	FSG_STRING_CONFIG,
++	.bmAttributes =		USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
++	.bMaxPower =		CONFIG_USB_GADGET_VBUS_DRAW / 2,
++};
++
++
++static struct usb_qualifier_descriptor
++dev_qualifier = {
++	.bLength =		sizeof dev_qualifier,
++	.bDescriptorType =	USB_DT_DEVICE_QUALIFIER,
++
++	.bcdUSB =		cpu_to_le16(0x0200),
++	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
++
++	.bNumConfigurations =	1,
++};
++
++static int populate_bos(struct fsg_dev *fsg, u8 *buf)
++{
++	memcpy(buf, &fsg_bos_desc, USB_DT_BOS_SIZE);
++	buf += USB_DT_BOS_SIZE;
++
++	memcpy(buf, &fsg_ext_cap_desc, USB_DT_USB_EXT_CAP_SIZE);
++	buf += USB_DT_USB_EXT_CAP_SIZE;
++
++	memcpy(buf, &fsg_ss_cap_desc, USB_DT_USB_SS_CAP_SIZE);
++
++	return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE
++		+ USB_DT_USB_EXT_CAP_SIZE;
++}
++
++/*
++ * Config descriptors must agree with the code that sets configurations
++ * and with code managing interfaces and their altsettings.  They must
++ * also handle different speeds and other-speed requests.
++ */
++static int populate_config_buf(struct usb_gadget *gadget,
++		u8 *buf, u8 type, unsigned index)
++{
++	enum usb_device_speed			speed = gadget->speed;
++	int					len;
++	const struct usb_descriptor_header	**function;
++
++	if (index > 0)
++		return -EINVAL;
++
++	if (gadget_is_dualspeed(gadget) && type == USB_DT_OTHER_SPEED_CONFIG)
++		speed = (USB_SPEED_FULL + USB_SPEED_HIGH) - speed;
++	function = gadget_is_dualspeed(gadget) && speed == USB_SPEED_HIGH
++		? (const struct usb_descriptor_header **)fsg_hs_function
++		: (const struct usb_descriptor_header **)fsg_fs_function;
++
++	/* for now, don't advertise srp-only devices */
++	if (!gadget_is_otg(gadget))
++		function++;
++
++	len = usb_gadget_config_buf(&config_desc, buf, EP0_BUFSIZE, function);
++	((struct usb_config_descriptor *) buf)->bDescriptorType = type;
++	return len;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++/* These routines may be called in process context or in_irq */
++
++/* Caller must hold fsg->lock */
++static void wakeup_thread(struct fsg_dev *fsg)
++{
++	/* Tell the main thread that something has happened */
++	fsg->thread_wakeup_needed = 1;
++	if (fsg->thread_task)
++		wake_up_process(fsg->thread_task);
++}
++
++
++static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state)
++{
++	unsigned long		flags;
++
++	/* Do nothing if a higher-priority exception is already in progress.
++	 * If a lower-or-equal priority exception is in progress, preempt it
++	 * and notify the main thread by sending it a signal. */
++	spin_lock_irqsave(&fsg->lock, flags);
++	if (fsg->state <= new_state) {
++		fsg->exception_req_tag = fsg->ep0_req_tag;
++		fsg->state = new_state;
++		if (fsg->thread_task)
++			send_sig_info(SIGUSR1, SEND_SIG_FORCED,
++					fsg->thread_task);
++	}
++	spin_unlock_irqrestore(&fsg->lock, flags);
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++/* The disconnect callback and ep0 routines.  These always run in_irq,
++ * except that ep0_queue() is called in the main thread to acknowledge
++ * completion of various requests: set config, set interface, and
++ * Bulk-only device reset. */
++
++static void fsg_disconnect(struct usb_gadget *gadget)
++{
++	struct fsg_dev		*fsg = get_gadget_data(gadget);
++
++	DBG(fsg, "disconnect or port reset\n");
++	raise_exception(fsg, FSG_STATE_DISCONNECT);
++}
++
++
++static int ep0_queue(struct fsg_dev *fsg)
++{
++	int	rc;
++
++	rc = usb_ep_queue(fsg->ep0, fsg->ep0req, GFP_ATOMIC);
++	if (rc != 0 && rc != -ESHUTDOWN) {
++
++		/* We can't do much more than wait for a reset */
++		WARNING(fsg, "error in submission: %s --> %d\n",
++				fsg->ep0->name, rc);
++	}
++	return rc;
++}
++
++static void ep0_complete(struct usb_ep *ep, struct usb_request *req)
++{
++	struct fsg_dev		*fsg = ep->driver_data;
++
++	if (req->actual > 0)
++		dump_msg(fsg, fsg->ep0req_name, req->buf, req->actual);
++	if (req->status || req->actual != req->length)
++		DBG(fsg, "%s --> %d, %u/%u\n", __func__,
++				req->status, req->actual, req->length);
++	if (req->status == -ECONNRESET)		// Request was cancelled
++		usb_ep_fifo_flush(ep);
++
++	if (req->status == 0 && req->context)
++		((fsg_routine_t) (req->context))(fsg);
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++/* Bulk and interrupt endpoint completion handlers.
++ * These always run in_irq. */
++
++static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req)
++{
++	struct fsg_dev		*fsg = ep->driver_data;
++	struct fsg_buffhd	*bh = req->context;
++
++	if (req->status || req->actual != req->length)
++		DBG(fsg, "%s --> %d, %u/%u\n", __func__,
++				req->status, req->actual, req->length);
++	if (req->status == -ECONNRESET)		// Request was cancelled
++		usb_ep_fifo_flush(ep);
++
++	/* Hold the lock while we update the request and buffer states */
++	smp_wmb();
++	spin_lock(&fsg->lock);
++	bh->inreq_busy = 0;
++	bh->state = BUF_STATE_EMPTY;
++	wakeup_thread(fsg);
++	spin_unlock(&fsg->lock);
++}
++
++static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
++{
++	struct fsg_dev		*fsg = ep->driver_data;
++	struct fsg_buffhd	*bh = req->context;
++
++	dump_msg(fsg, "bulk-out", req->buf, req->actual);
++	if (req->status || req->actual != bh->bulk_out_intended_length)
++		DBG(fsg, "%s --> %d, %u/%u\n", __func__,
++				req->status, req->actual,
++				bh->bulk_out_intended_length);
++	if (req->status == -ECONNRESET)		// Request was cancelled
++		usb_ep_fifo_flush(ep);
++
++	/* Hold the lock while we update the request and buffer states */
++	smp_wmb();
++	spin_lock(&fsg->lock);
++	bh->outreq_busy = 0;
++	bh->state = BUF_STATE_FULL;
++	wakeup_thread(fsg);
++	spin_unlock(&fsg->lock);
++}
++
++
++#ifdef CONFIG_USB_FILE_STORAGE_TEST
++static void intr_in_complete(struct usb_ep *ep, struct usb_request *req)
++{
++	struct fsg_dev		*fsg = ep->driver_data;
++	struct fsg_buffhd	*bh = req->context;
++
++	if (req->status || req->actual != req->length)
++		DBG(fsg, "%s --> %d, %u/%u\n", __func__,
++				req->status, req->actual, req->length);
++	if (req->status == -ECONNRESET)		// Request was cancelled
++		usb_ep_fifo_flush(ep);
++
++	/* Hold the lock while we update the request and buffer states */
++	smp_wmb();
++	spin_lock(&fsg->lock);
++	fsg->intreq_busy = 0;
++	bh->state = BUF_STATE_EMPTY;
++	wakeup_thread(fsg);
++	spin_unlock(&fsg->lock);
++}
++
++#else
++static void intr_in_complete(struct usb_ep *ep, struct usb_request *req)
++{}
++#endif /* CONFIG_USB_FILE_STORAGE_TEST */
++
++
++/*-------------------------------------------------------------------------*/
++
++/* Ep0 class-specific handlers.  These always run in_irq. */
++
++#ifdef CONFIG_USB_FILE_STORAGE_TEST
++static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{
++	struct usb_request	*req = fsg->ep0req;
++	static u8		cbi_reset_cmnd[6] = {
++			SEND_DIAGNOSTIC, 4, 0xff, 0xff, 0xff, 0xff};
++
++	/* Error in command transfer? */
++	if (req->status || req->length != req->actual ||
++			req->actual < 6 || req->actual > MAX_COMMAND_SIZE) {
++
++		/* Not all controllers allow a protocol stall after
++		 * receiving control-out data, but we'll try anyway. */
++		fsg_set_halt(fsg, fsg->ep0);
++		return;			// Wait for reset
++	}
++
++	/* Is it the special reset command? */
++	if (req->actual >= sizeof cbi_reset_cmnd &&
++			memcmp(req->buf, cbi_reset_cmnd,
++				sizeof cbi_reset_cmnd) == 0) {
++
++		/* Raise an exception to stop the current operation
++		 * and reinitialize our state. */
++		DBG(fsg, "cbi reset request\n");
++		raise_exception(fsg, FSG_STATE_RESET);
++		return;
++	}
++
++	VDBG(fsg, "CB[I] accept device-specific command\n");
++	spin_lock(&fsg->lock);
++
++	/* Save the command for later */
++	if (fsg->cbbuf_cmnd_size)
++		WARNING(fsg, "CB[I] overwriting previous command\n");
++	fsg->cbbuf_cmnd_size = req->actual;
++	memcpy(fsg->cbbuf_cmnd, req->buf, fsg->cbbuf_cmnd_size);
++
++	wakeup_thread(fsg);
++	spin_unlock(&fsg->lock);
++}
++
++#else
++static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{}
++#endif /* CONFIG_USB_FILE_STORAGE_TEST */
++
++
++static int class_setup_req(struct fsg_dev *fsg,
++		const struct usb_ctrlrequest *ctrl)
++{
++	struct usb_request	*req = fsg->ep0req;
++	int			value = -EOPNOTSUPP;
++	u16			w_index = le16_to_cpu(ctrl->wIndex);
++	u16                     w_value = le16_to_cpu(ctrl->wValue);
++	u16			w_length = le16_to_cpu(ctrl->wLength);
++
++	if (!fsg->config)
++		return value;
++
++	/* Handle Bulk-only class-specific requests */
++	if (transport_is_bbb()) {
++		switch (ctrl->bRequest) {
++
++		case US_BULK_RESET_REQUEST:
++			if (ctrl->bRequestType != (USB_DIR_OUT |
++					USB_TYPE_CLASS | USB_RECIP_INTERFACE))
++				break;
++			if (w_index != 0 || w_value != 0 || w_length != 0) {
++				value = -EDOM;
++				break;
++			}
++
++			/* Raise an exception to stop the current operation
++			 * and reinitialize our state. */
++			DBG(fsg, "bulk reset request\n");
++			raise_exception(fsg, FSG_STATE_RESET);
++			value = DELAYED_STATUS;
++			break;
++
++		case US_BULK_GET_MAX_LUN:
++			if (ctrl->bRequestType != (USB_DIR_IN |
++					USB_TYPE_CLASS | USB_RECIP_INTERFACE))
++				break;
++			if (w_index != 0 || w_value != 0 || w_length != 1) {
++				value = -EDOM;
++				break;
++			}
++			VDBG(fsg, "get max LUN\n");
++			*(u8 *) req->buf = fsg->nluns - 1;
++			value = 1;
++			break;
++		}
++	}
++
++	/* Handle CBI class-specific requests */
++	else {
++		switch (ctrl->bRequest) {
++
++		case USB_CBI_ADSC_REQUEST:
++			if (ctrl->bRequestType != (USB_DIR_OUT |
++					USB_TYPE_CLASS | USB_RECIP_INTERFACE))
++				break;
++			if (w_index != 0 || w_value != 0) {
++				value = -EDOM;
++				break;
++			}
++			if (w_length > MAX_COMMAND_SIZE) {
++				value = -EOVERFLOW;
++				break;
++			}
++			value = w_length;
++			fsg->ep0req->context = received_cbi_adsc;
++			break;
++		}
++	}
++
++	if (value == -EOPNOTSUPP)
++		VDBG(fsg,
++			"unknown class-specific control req "
++			"%02x.%02x v%04x i%04x l%u\n",
++			ctrl->bRequestType, ctrl->bRequest,
++			le16_to_cpu(ctrl->wValue), w_index, w_length);
++	return value;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++/* Ep0 standard request handlers.  These always run in_irq. */
++
++static int standard_setup_req(struct fsg_dev *fsg,
++		const struct usb_ctrlrequest *ctrl)
++{
++	struct usb_request	*req = fsg->ep0req;
++	int			value = -EOPNOTSUPP;
++	u16			w_index = le16_to_cpu(ctrl->wIndex);
++	u16			w_value = le16_to_cpu(ctrl->wValue);
++
++	/* Usually this just stores reply data in the pre-allocated ep0 buffer,
++	 * but config change events will also reconfigure hardware. */
++	switch (ctrl->bRequest) {
++
++	case USB_REQ_GET_DESCRIPTOR:
++		if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
++				USB_RECIP_DEVICE))
++			break;
++		switch (w_value >> 8) {
++
++		case USB_DT_DEVICE:
++			VDBG(fsg, "get device descriptor\n");
++			device_desc.bMaxPacketSize0 = fsg->ep0->maxpacket;
++			value = sizeof device_desc;
++			memcpy(req->buf, &device_desc, value);
++			break;
++		case USB_DT_DEVICE_QUALIFIER:
++			VDBG(fsg, "get device qualifier\n");
++			if (!gadget_is_dualspeed(fsg->gadget) ||
++					fsg->gadget->speed == USB_SPEED_SUPER)
++				break;
++			/*
++			 * Assume ep0 uses the same maxpacket value for both
++			 * speeds
++			 */
++			dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket;
++			value = sizeof dev_qualifier;
++			memcpy(req->buf, &dev_qualifier, value);
++			break;
++
++		case USB_DT_OTHER_SPEED_CONFIG:
++			VDBG(fsg, "get other-speed config descriptor\n");
++			if (!gadget_is_dualspeed(fsg->gadget) ||
++					fsg->gadget->speed == USB_SPEED_SUPER)
++				break;
++			goto get_config;
++		case USB_DT_CONFIG:
++			VDBG(fsg, "get configuration descriptor\n");
++get_config:
++			value = populate_config_buf(fsg->gadget,
++					req->buf,
++					w_value >> 8,
++					w_value & 0xff);
++			break;
++
++		case USB_DT_STRING:
++			VDBG(fsg, "get string descriptor\n");
++
++			/* wIndex == language code */
++			value = usb_gadget_get_string(&fsg_stringtab,
++					w_value & 0xff, req->buf);
++			break;
++
++		case USB_DT_BOS:
++			VDBG(fsg, "get bos descriptor\n");
++
++			if (gadget_is_superspeed(fsg->gadget))
++				value = populate_bos(fsg, req->buf);
++			break;
++		}
++
++		break;
++
++	/* One config, two speeds */
++	case USB_REQ_SET_CONFIGURATION:
++		if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD |
++				USB_RECIP_DEVICE))
++			break;
++		VDBG(fsg, "set configuration\n");
++		if (w_value == CONFIG_VALUE || w_value == 0) {
++			fsg->new_config = w_value;
++
++			/* Raise an exception to wipe out previous transaction
++			 * state (queued bufs, etc) and set the new config. */
++			raise_exception(fsg, FSG_STATE_CONFIG_CHANGE);
++			value = DELAYED_STATUS;
++		}
++		break;
++	case USB_REQ_GET_CONFIGURATION:
++		if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
++				USB_RECIP_DEVICE))
++			break;
++		VDBG(fsg, "get configuration\n");
++		*(u8 *) req->buf = fsg->config;
++		value = 1;
++		break;
++
++	case USB_REQ_SET_INTERFACE:
++		if (ctrl->bRequestType != (USB_DIR_OUT| USB_TYPE_STANDARD |
++				USB_RECIP_INTERFACE))
++			break;
++		if (fsg->config && w_index == 0) {
++
++			/* Raise an exception to wipe out previous transaction
++			 * state (queued bufs, etc) and install the new
++			 * interface altsetting. */
++			raise_exception(fsg, FSG_STATE_INTERFACE_CHANGE);
++			value = DELAYED_STATUS;
++		}
++		break;
++	case USB_REQ_GET_INTERFACE:
++		if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
++				USB_RECIP_INTERFACE))
++			break;
++		if (!fsg->config)
++			break;
++		if (w_index != 0) {
++			value = -EDOM;
++			break;
++		}
++		VDBG(fsg, "get interface\n");
++		*(u8 *) req->buf = 0;
++		value = 1;
++		break;
++
++	default:
++		VDBG(fsg,
++			"unknown control req %02x.%02x v%04x i%04x l%u\n",
++			ctrl->bRequestType, ctrl->bRequest,
++			w_value, w_index, le16_to_cpu(ctrl->wLength));
++	}
++
++	return value;
++}
++
++
++static int fsg_setup(struct usb_gadget *gadget,
++		const struct usb_ctrlrequest *ctrl)
++{
++	struct fsg_dev		*fsg = get_gadget_data(gadget);
++	int			rc;
++	int			w_length = le16_to_cpu(ctrl->wLength);
++
++	++fsg->ep0_req_tag;		// Record arrival of a new request
++	fsg->ep0req->context = NULL;
++	fsg->ep0req->length = 0;
++	dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl));
++
++	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS)
++		rc = class_setup_req(fsg, ctrl);
++	else
++		rc = standard_setup_req(fsg, ctrl);
++
++	/* Respond with data/status or defer until later? */
++	if (rc >= 0 && rc != DELAYED_STATUS) {
++		rc = min(rc, w_length);
++		fsg->ep0req->length = rc;
++		fsg->ep0req->zero = rc < w_length;
++		fsg->ep0req_name = (ctrl->bRequestType & USB_DIR_IN ?
++				"ep0-in" : "ep0-out");
++		rc = ep0_queue(fsg);
++	}
++
++	/* Device either stalls (rc < 0) or reports success */
++	return rc;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++/* All the following routines run in process context */
++
++
++/* Use this for bulk or interrupt transfers, not ep0 */
++static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
++		struct usb_request *req, int *pbusy,
++		enum fsg_buffer_state *state)
++{
++	int	rc;
++
++	if (ep == fsg->bulk_in)
++		dump_msg(fsg, "bulk-in", req->buf, req->length);
++	else if (ep == fsg->intr_in)
++		dump_msg(fsg, "intr-in", req->buf, req->length);
++
++	spin_lock_irq(&fsg->lock);
++	*pbusy = 1;
++	*state = BUF_STATE_BUSY;
++	spin_unlock_irq(&fsg->lock);
++	rc = usb_ep_queue(ep, req, GFP_KERNEL);
++	if (rc != 0) {
++		*pbusy = 0;
++		*state = BUF_STATE_EMPTY;
++
++		/* We can't do much more than wait for a reset */
++
++		/* Note: currently the net2280 driver fails zero-length
++		 * submissions if DMA is enabled. */
++		if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP &&
++						req->length == 0))
++			WARNING(fsg, "error in submission: %s --> %d\n",
++					ep->name, rc);
++	}
++}
++
++
++static int sleep_thread(struct fsg_dev *fsg)
++{
++	int	rc = 0;
++
++	/* Wait until a signal arrives or we are woken up */
++	for (;;) {
++		try_to_freeze();
++		set_current_state(TASK_INTERRUPTIBLE);
++		if (signal_pending(current)) {
++			rc = -EINTR;
++			break;
++		}
++		if (fsg->thread_wakeup_needed)
++			break;
++		schedule();
++	}
++	__set_current_state(TASK_RUNNING);
++	fsg->thread_wakeup_needed = 0;
++	return rc;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static int do_read(struct fsg_dev *fsg)
++{
++	struct fsg_lun		*curlun = fsg->curlun;
++	u32			lba;
++	struct fsg_buffhd	*bh;
++	int			rc;
++	u32			amount_left;
++	loff_t			file_offset, file_offset_tmp;
++	unsigned int		amount;
++	ssize_t			nread;
++
++	/* Get the starting Logical Block Address and check that it's
++	 * not too big */
++	if (fsg->cmnd[0] == READ_6)
++		lba = get_unaligned_be24(&fsg->cmnd[1]);
++	else {
++		lba = get_unaligned_be32(&fsg->cmnd[2]);
++
++		/* We allow DPO (Disable Page Out = don't save data in the
++		 * cache) and FUA (Force Unit Access = don't read from the
++		 * cache), but we don't implement them. */
++		if ((fsg->cmnd[1] & ~0x18) != 0) {
++			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++			return -EINVAL;
++		}
++	}
++	if (lba >= curlun->num_sectors) {
++		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
++		return -EINVAL;
++	}
++	file_offset = ((loff_t) lba) << curlun->blkbits;
++
++	/* Carry out the file reads */
++	amount_left = fsg->data_size_from_cmnd;
++	if (unlikely(amount_left == 0))
++		return -EIO;		// No default reply
++
++	for (;;) {
++
++		/* Figure out how much we need to read:
++		 * Try to read the remaining amount.
++		 * But don't read more than the buffer size.
++		 * And don't try to read past the end of the file.
++		 */
++		amount = min((unsigned int) amount_left, mod_data.buflen);
++		amount = min((loff_t) amount,
++				curlun->file_length - file_offset);
++
++		/* Wait for the next buffer to become available */
++		bh = fsg->next_buffhd_to_fill;
++		while (bh->state != BUF_STATE_EMPTY) {
++			rc = sleep_thread(fsg);
++			if (rc)
++				return rc;
++		}
++
++		/* If we were asked to read past the end of file,
++		 * end with an empty buffer. */
++		if (amount == 0) {
++			curlun->sense_data =
++					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
++			curlun->sense_data_info = file_offset >> curlun->blkbits;
++			curlun->info_valid = 1;
++			bh->inreq->length = 0;
++			bh->state = BUF_STATE_FULL;
++			break;
++		}
++
++		/* Perform the read */
++		file_offset_tmp = file_offset;
++		nread = vfs_read(curlun->filp,
++				(char __user *) bh->buf,
++				amount, &file_offset_tmp);
++		VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
++				(unsigned long long) file_offset,
++				(int) nread);
++		if (signal_pending(current))
++			return -EINTR;
++
++		if (nread < 0) {
++			LDBG(curlun, "error in file read: %d\n",
++					(int) nread);
++			nread = 0;
++		} else if (nread < amount) {
++			LDBG(curlun, "partial file read: %d/%u\n",
++					(int) nread, amount);
++			nread = round_down(nread, curlun->blksize);
++		}
++		file_offset  += nread;
++		amount_left  -= nread;
++		fsg->residue -= nread;
++
++		/* Except at the end of the transfer, nread will be
++		 * equal to the buffer size, which is divisible by the
++		 * bulk-in maxpacket size.
++		 */
++		bh->inreq->length = nread;
++		bh->state = BUF_STATE_FULL;
++
++		/* If an error occurred, report it and its position */
++		if (nread < amount) {
++			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
++			curlun->sense_data_info = file_offset >> curlun->blkbits;
++			curlun->info_valid = 1;
++			break;
++		}
++
++		if (amount_left == 0)
++			break;		// No more left to read
++
++		/* Send this buffer and go read some more */
++		bh->inreq->zero = 0;
++		start_transfer(fsg, fsg->bulk_in, bh->inreq,
++				&bh->inreq_busy, &bh->state);
++		fsg->next_buffhd_to_fill = bh->next;
++	}
++
++	return -EIO;		// No default reply
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static int do_write(struct fsg_dev *fsg)
++{
++	struct fsg_lun		*curlun = fsg->curlun;
++	u32			lba;
++	struct fsg_buffhd	*bh;
++	int			get_some_more;
++	u32			amount_left_to_req, amount_left_to_write;
++	loff_t			usb_offset, file_offset, file_offset_tmp;
++	unsigned int		amount;
++	ssize_t			nwritten;
++	int			rc;
++
++	if (curlun->ro) {
++		curlun->sense_data = SS_WRITE_PROTECTED;
++		return -EINVAL;
++	}
++	spin_lock(&curlun->filp->f_lock);
++	curlun->filp->f_flags &= ~O_SYNC;	// Default is not to wait
++	spin_unlock(&curlun->filp->f_lock);
++
++	/* Get the starting Logical Block Address and check that it's
++	 * not too big */
++	if (fsg->cmnd[0] == WRITE_6)
++		lba = get_unaligned_be24(&fsg->cmnd[1]);
++	else {
++		lba = get_unaligned_be32(&fsg->cmnd[2]);
++
++		/* We allow DPO (Disable Page Out = don't save data in the
++		 * cache) and FUA (Force Unit Access = write directly to the
++		 * medium).  We don't implement DPO; we implement FUA by
++		 * performing synchronous output. */
++		if ((fsg->cmnd[1] & ~0x18) != 0) {
++			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++			return -EINVAL;
++		}
++		/* FUA */
++		if (!curlun->nofua && (fsg->cmnd[1] & 0x08)) {
++			spin_lock(&curlun->filp->f_lock);
++			curlun->filp->f_flags |= O_DSYNC;
++			spin_unlock(&curlun->filp->f_lock);
++		}
++	}
++	if (lba >= curlun->num_sectors) {
++		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
++		return -EINVAL;
++	}
++
++	/* Carry out the file writes */
++	get_some_more = 1;
++	file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits;
++	amount_left_to_req = amount_left_to_write = fsg->data_size_from_cmnd;
++
++	while (amount_left_to_write > 0) {
++
++		/* Queue a request for more data from the host */
++		bh = fsg->next_buffhd_to_fill;
++		if (bh->state == BUF_STATE_EMPTY && get_some_more) {
++
++			/* Figure out how much we want to get:
++			 * Try to get the remaining amount,
++			 * but not more than the buffer size.
++			 */
++			amount = min(amount_left_to_req, mod_data.buflen);
++
++			/* Beyond the end of the backing file? */
++			if (usb_offset >= curlun->file_length) {
++				get_some_more = 0;
++				curlun->sense_data =
++					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
++				curlun->sense_data_info = usb_offset >> curlun->blkbits;
++				curlun->info_valid = 1;
++				continue;
++			}
++
++			/* Get the next buffer */
++			usb_offset += amount;
++			fsg->usb_amount_left -= amount;
++			amount_left_to_req -= amount;
++			if (amount_left_to_req == 0)
++				get_some_more = 0;
++
++			/* Except at the end of the transfer, amount will be
++			 * equal to the buffer size, which is divisible by
++			 * the bulk-out maxpacket size.
++			 */
++			set_bulk_out_req_length(fsg, bh, amount);
++			start_transfer(fsg, fsg->bulk_out, bh->outreq,
++					&bh->outreq_busy, &bh->state);
++			fsg->next_buffhd_to_fill = bh->next;
++			continue;
++		}
++
++		/* Write the received data to the backing file */
++		bh = fsg->next_buffhd_to_drain;
++		if (bh->state == BUF_STATE_EMPTY && !get_some_more)
++			break;			// We stopped early
++		if (bh->state == BUF_STATE_FULL) {
++			smp_rmb();
++			fsg->next_buffhd_to_drain = bh->next;
++			bh->state = BUF_STATE_EMPTY;
++
++			/* Did something go wrong with the transfer? */
++			if (bh->outreq->status != 0) {
++				curlun->sense_data = SS_COMMUNICATION_FAILURE;
++				curlun->sense_data_info = file_offset >> curlun->blkbits;
++				curlun->info_valid = 1;
++				break;
++			}
++
++			amount = bh->outreq->actual;
++			if (curlun->file_length - file_offset < amount) {
++				LERROR(curlun,
++	"write %u @ %llu beyond end %llu\n",
++	amount, (unsigned long long) file_offset,
++	(unsigned long long) curlun->file_length);
++				amount = curlun->file_length - file_offset;
++			}
++
++			/* Don't accept excess data.  The spec doesn't say
++			 * what to do in this case.  We'll ignore the error.
++			 */
++			amount = min(amount, bh->bulk_out_intended_length);
++
++			/* Don't write a partial block */
++			amount = round_down(amount, curlun->blksize);
++			if (amount == 0)
++				goto empty_write;
++
++			/* Perform the write */
++			file_offset_tmp = file_offset;
++			nwritten = vfs_write(curlun->filp,
++					(char __user *) bh->buf,
++					amount, &file_offset_tmp);
++			VLDBG(curlun, "file write %u @ %llu -> %d\n", amount,
++					(unsigned long long) file_offset,
++					(int) nwritten);
++			if (signal_pending(current))
++				return -EINTR;		// Interrupted!
++
++			if (nwritten < 0) {
++				LDBG(curlun, "error in file write: %d\n",
++						(int) nwritten);
++				nwritten = 0;
++			} else if (nwritten < amount) {
++				LDBG(curlun, "partial file write: %d/%u\n",
++						(int) nwritten, amount);
++				nwritten = round_down(nwritten, curlun->blksize);
++			}
++			file_offset += nwritten;
++			amount_left_to_write -= nwritten;
++			fsg->residue -= nwritten;
++
++			/* If an error occurred, report it and its position */
++			if (nwritten < amount) {
++				curlun->sense_data = SS_WRITE_ERROR;
++				curlun->sense_data_info = file_offset >> curlun->blkbits;
++				curlun->info_valid = 1;
++				break;
++			}
++
++ empty_write:
++			/* Did the host decide to stop early? */
++			if (bh->outreq->actual < bh->bulk_out_intended_length) {
++				fsg->short_packet_received = 1;
++				break;
++			}
++			continue;
++		}
++
++		/* Wait for something to happen */
++		rc = sleep_thread(fsg);
++		if (rc)
++			return rc;
++	}
++
++	return -EIO;		// No default reply
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static int do_synchronize_cache(struct fsg_dev *fsg)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++	int		rc;
++
++	/* We ignore the requested LBA and write out all file's
++	 * dirty data buffers. */
++	rc = fsg_lun_fsync_sub(curlun);
++	if (rc)
++		curlun->sense_data = SS_WRITE_ERROR;
++	return 0;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static void invalidate_sub(struct fsg_lun *curlun)
++{
++	struct file	*filp = curlun->filp;
++	struct inode	*inode = filp->f_path.dentry->d_inode;
++	unsigned long	rc;
++
++	rc = invalidate_mapping_pages(inode->i_mapping, 0, -1);
++	VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc);
++}
++
++static int do_verify(struct fsg_dev *fsg)
++{
++	struct fsg_lun		*curlun = fsg->curlun;
++	u32			lba;
++	u32			verification_length;
++	struct fsg_buffhd	*bh = fsg->next_buffhd_to_fill;
++	loff_t			file_offset, file_offset_tmp;
++	u32			amount_left;
++	unsigned int		amount;
++	ssize_t			nread;
++
++	/* Get the starting Logical Block Address and check that it's
++	 * not too big */
++	lba = get_unaligned_be32(&fsg->cmnd[2]);
++	if (lba >= curlun->num_sectors) {
++		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
++		return -EINVAL;
++	}
++
++	/* We allow DPO (Disable Page Out = don't save data in the
++	 * cache) but we don't implement it. */
++	if ((fsg->cmnd[1] & ~0x10) != 0) {
++		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++		return -EINVAL;
++	}
++
++	verification_length = get_unaligned_be16(&fsg->cmnd[7]);
++	if (unlikely(verification_length == 0))
++		return -EIO;		// No default reply
++
++	/* Prepare to carry out the file verify */
++	amount_left = verification_length << curlun->blkbits;
++	file_offset = ((loff_t) lba) << curlun->blkbits;
++
++	/* Write out all the dirty buffers before invalidating them */
++	fsg_lun_fsync_sub(curlun);
++	if (signal_pending(current))
++		return -EINTR;
++
++	invalidate_sub(curlun);
++	if (signal_pending(current))
++		return -EINTR;
++
++	/* Just try to read the requested blocks */
++	while (amount_left > 0) {
++
++		/* Figure out how much we need to read:
++		 * Try to read the remaining amount, but not more than
++		 * the buffer size.
++		 * And don't try to read past the end of the file.
++		 */
++		amount = min((unsigned int) amount_left, mod_data.buflen);
++		amount = min((loff_t) amount,
++				curlun->file_length - file_offset);
++		if (amount == 0) {
++			curlun->sense_data =
++					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
++			curlun->sense_data_info = file_offset >> curlun->blkbits;
++			curlun->info_valid = 1;
++			break;
++		}
++
++		/* Perform the read */
++		file_offset_tmp = file_offset;
++		nread = vfs_read(curlun->filp,
++				(char __user *) bh->buf,
++				amount, &file_offset_tmp);
++		VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
++				(unsigned long long) file_offset,
++				(int) nread);
++		if (signal_pending(current))
++			return -EINTR;
++
++		if (nread < 0) {
++			LDBG(curlun, "error in file verify: %d\n",
++					(int) nread);
++			nread = 0;
++		} else if (nread < amount) {
++			LDBG(curlun, "partial file verify: %d/%u\n",
++					(int) nread, amount);
++			nread = round_down(nread, curlun->blksize);
++		}
++		if (nread == 0) {
++			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
++			curlun->sense_data_info = file_offset >> curlun->blkbits;
++			curlun->info_valid = 1;
++			break;
++		}
++		file_offset += nread;
++		amount_left -= nread;
++	}
++	return 0;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static int do_inquiry(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{
++	u8	*buf = (u8 *) bh->buf;
++
++	static char vendor_id[] = "Linux   ";
++	static char product_disk_id[] = "File-Stor Gadget";
++	static char product_cdrom_id[] = "File-CD Gadget  ";
++
++	if (!fsg->curlun) {		// Unsupported LUNs are okay
++		fsg->bad_lun_okay = 1;
++		memset(buf, 0, 36);
++		buf[0] = 0x7f;		// Unsupported, no device-type
++		buf[4] = 31;		// Additional length
++		return 36;
++	}
++
++	memset(buf, 0, 8);
++	buf[0] = (mod_data.cdrom ? TYPE_ROM : TYPE_DISK);
++	if (mod_data.removable)
++		buf[1] = 0x80;
++	buf[2] = 2;		// ANSI SCSI level 2
++	buf[3] = 2;		// SCSI-2 INQUIRY data format
++	buf[4] = 31;		// Additional length
++				// No special options
++	sprintf(buf + 8, "%-8s%-16s%04x", vendor_id,
++			(mod_data.cdrom ? product_cdrom_id :
++				product_disk_id),
++			mod_data.release);
++	return 36;
++}
++
++
++static int do_request_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++	u8		*buf = (u8 *) bh->buf;
++	u32		sd, sdinfo;
++	int		valid;
++
++	/*
++	 * From the SCSI-2 spec., section 7.9 (Unit attention condition):
++	 *
++	 * If a REQUEST SENSE command is received from an initiator
++	 * with a pending unit attention condition (before the target
++	 * generates the contingent allegiance condition), then the
++	 * target shall either:
++	 *   a) report any pending sense data and preserve the unit
++	 *	attention condition on the logical unit, or,
++	 *   b) report the unit attention condition, may discard any
++	 *	pending sense data, and clear the unit attention
++	 *	condition on the logical unit for that initiator.
++	 *
++	 * FSG normally uses option a); enable this code to use option b).
++	 */
++#if 0
++	if (curlun && curlun->unit_attention_data != SS_NO_SENSE) {
++		curlun->sense_data = curlun->unit_attention_data;
++		curlun->unit_attention_data = SS_NO_SENSE;
++	}
++#endif
++
++	if (!curlun) {		// Unsupported LUNs are okay
++		fsg->bad_lun_okay = 1;
++		sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
++		sdinfo = 0;
++		valid = 0;
++	} else {
++		sd = curlun->sense_data;
++		sdinfo = curlun->sense_data_info;
++		valid = curlun->info_valid << 7;
++		curlun->sense_data = SS_NO_SENSE;
++		curlun->sense_data_info = 0;
++		curlun->info_valid = 0;
++	}
++
++	memset(buf, 0, 18);
++	buf[0] = valid | 0x70;			// Valid, current error
++	buf[2] = SK(sd);
++	put_unaligned_be32(sdinfo, &buf[3]);	/* Sense information */
++	buf[7] = 18 - 8;			// Additional sense length
++	buf[12] = ASC(sd);
++	buf[13] = ASCQ(sd);
++	return 18;
++}
++
++
++static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++	u32		lba = get_unaligned_be32(&fsg->cmnd[2]);
++	int		pmi = fsg->cmnd[8];
++	u8		*buf = (u8 *) bh->buf;
++
++	/* Check the PMI and LBA fields */
++	if (pmi > 1 || (pmi == 0 && lba != 0)) {
++		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++		return -EINVAL;
++	}
++
++	put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
++						/* Max logical block */
++	put_unaligned_be32(curlun->blksize, &buf[4]);	/* Block length */
++	return 8;
++}
++
++
++static int do_read_header(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++	int		msf = fsg->cmnd[1] & 0x02;
++	u32		lba = get_unaligned_be32(&fsg->cmnd[2]);
++	u8		*buf = (u8 *) bh->buf;
++
++	if ((fsg->cmnd[1] & ~0x02) != 0) {		/* Mask away MSF */
++		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++		return -EINVAL;
++	}
++	if (lba >= curlun->num_sectors) {
++		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
++		return -EINVAL;
++	}
++
++	memset(buf, 0, 8);
++	buf[0] = 0x01;		/* 2048 bytes of user data, rest is EC */
++	store_cdrom_address(&buf[4], msf, lba);
++	return 8;
++}
++
++
++static int do_read_toc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++	int		msf = fsg->cmnd[1] & 0x02;
++	int		start_track = fsg->cmnd[6];
++	u8		*buf = (u8 *) bh->buf;
++
++	if ((fsg->cmnd[1] & ~0x02) != 0 ||		/* Mask away MSF */
++			start_track > 1) {
++		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++		return -EINVAL;
++	}
++
++	memset(buf, 0, 20);
++	buf[1] = (20-2);		/* TOC data length */
++	buf[2] = 1;			/* First track number */
++	buf[3] = 1;			/* Last track number */
++	buf[5] = 0x16;			/* Data track, copying allowed */
++	buf[6] = 0x01;			/* Only track is number 1 */
++	store_cdrom_address(&buf[8], msf, 0);
++
++	buf[13] = 0x16;			/* Lead-out track is data */
++	buf[14] = 0xAA;			/* Lead-out track number */
++	store_cdrom_address(&buf[16], msf, curlun->num_sectors);
++	return 20;
++}
++
++
++static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++	int		mscmnd = fsg->cmnd[0];
++	u8		*buf = (u8 *) bh->buf;
++	u8		*buf0 = buf;
++	int		pc, page_code;
++	int		changeable_values, all_pages;
++	int		valid_page = 0;
++	int		len, limit;
++
++	if ((fsg->cmnd[1] & ~0x08) != 0) {		// Mask away DBD
++		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++		return -EINVAL;
++	}
++	pc = fsg->cmnd[2] >> 6;
++	page_code = fsg->cmnd[2] & 0x3f;
++	if (pc == 3) {
++		curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED;
++		return -EINVAL;
++	}
++	changeable_values = (pc == 1);
++	all_pages = (page_code == 0x3f);
++
++	/* Write the mode parameter header.  Fixed values are: default
++	 * medium type, no cache control (DPOFUA), and no block descriptors.
++	 * The only variable value is the WriteProtect bit.  We will fill in
++	 * the mode data length later. */
++	memset(buf, 0, 8);
++	if (mscmnd == MODE_SENSE) {
++		buf[2] = (curlun->ro ? 0x80 : 0x00);		// WP, DPOFUA
++		buf += 4;
++		limit = 255;
++	} else {			// MODE_SENSE_10
++		buf[3] = (curlun->ro ? 0x80 : 0x00);		// WP, DPOFUA
++		buf += 8;
++		limit = 65535;		// Should really be mod_data.buflen
++	}
++
++	/* No block descriptors */
++
++	/* The mode pages, in numerical order.  The only page we support
++	 * is the Caching page. */
++	if (page_code == 0x08 || all_pages) {
++		valid_page = 1;
++		buf[0] = 0x08;		// Page code
++		buf[1] = 10;		// Page length
++		memset(buf+2, 0, 10);	// None of the fields are changeable
++
++		if (!changeable_values) {
++			buf[2] = 0x04;	// Write cache enable,
++					// Read cache not disabled
++					// No cache retention priorities
++			put_unaligned_be16(0xffff, &buf[4]);
++					/* Don't disable prefetch */
++					/* Minimum prefetch = 0 */
++			put_unaligned_be16(0xffff, &buf[8]);
++					/* Maximum prefetch */
++			put_unaligned_be16(0xffff, &buf[10]);
++					/* Maximum prefetch ceiling */
++		}
++		buf += 12;
++	}
++
++	/* Check that a valid page was requested and the mode data length
++	 * isn't too long. */
++	len = buf - buf0;
++	if (!valid_page || len > limit) {
++		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++		return -EINVAL;
++	}
++
++	/*  Store the mode data length */
++	if (mscmnd == MODE_SENSE)
++		buf0[0] = len - 1;
++	else
++		put_unaligned_be16(len - 2, buf0);
++	return len;
++}
++
++
++static int do_start_stop(struct fsg_dev *fsg)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++	int		loej, start;
++
++	if (!mod_data.removable) {
++		curlun->sense_data = SS_INVALID_COMMAND;
++		return -EINVAL;
++	}
++
++	// int immed = fsg->cmnd[1] & 0x01;
++	loej = fsg->cmnd[4] & 0x02;
++	start = fsg->cmnd[4] & 0x01;
++
++#ifdef CONFIG_USB_FILE_STORAGE_TEST
++	if ((fsg->cmnd[1] & ~0x01) != 0 ||		// Mask away Immed
++			(fsg->cmnd[4] & ~0x03) != 0) {	// Mask LoEj, Start
++		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++		return -EINVAL;
++	}
++
++	if (!start) {
++
++		/* Are we allowed to unload the media? */
++		if (curlun->prevent_medium_removal) {
++			LDBG(curlun, "unload attempt prevented\n");
++			curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED;
++			return -EINVAL;
++		}
++		if (loej) {		// Simulate an unload/eject
++			up_read(&fsg->filesem);
++			down_write(&fsg->filesem);
++			fsg_lun_close(curlun);
++			up_write(&fsg->filesem);
++			down_read(&fsg->filesem);
++		}
++	} else {
++
++		/* Our emulation doesn't support mounting; the medium is
++		 * available for use as soon as it is loaded. */
++		if (!fsg_lun_is_open(curlun)) {
++			curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
++			return -EINVAL;
++		}
++	}
++#endif
++	return 0;
++}
++
++
++static int do_prevent_allow(struct fsg_dev *fsg)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++	int		prevent;
++
++	if (!mod_data.removable) {
++		curlun->sense_data = SS_INVALID_COMMAND;
++		return -EINVAL;
++	}
++
++	prevent = fsg->cmnd[4] & 0x01;
++	if ((fsg->cmnd[4] & ~0x01) != 0) {		// Mask away Prevent
++		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++		return -EINVAL;
++	}
++
++	if (curlun->prevent_medium_removal && !prevent)
++		fsg_lun_fsync_sub(curlun);
++	curlun->prevent_medium_removal = prevent;
++	return 0;
++}
++
++
++static int do_read_format_capacities(struct fsg_dev *fsg,
++			struct fsg_buffhd *bh)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++	u8		*buf = (u8 *) bh->buf;
++
++	buf[0] = buf[1] = buf[2] = 0;
++	buf[3] = 8;		// Only the Current/Maximum Capacity Descriptor
++	buf += 4;
++
++	put_unaligned_be32(curlun->num_sectors, &buf[0]);
++						/* Number of blocks */
++	put_unaligned_be32(curlun->blksize, &buf[4]);	/* Block length */
++	buf[4] = 0x02;				/* Current capacity */
++	return 12;
++}
++
++
++static int do_mode_select(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++
++	/* We don't support MODE SELECT */
++	curlun->sense_data = SS_INVALID_COMMAND;
++	return -EINVAL;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static int halt_bulk_in_endpoint(struct fsg_dev *fsg)
++{
++	int	rc;
++
++	rc = fsg_set_halt(fsg, fsg->bulk_in);
++	if (rc == -EAGAIN)
++		VDBG(fsg, "delayed bulk-in endpoint halt\n");
++	while (rc != 0) {
++		if (rc != -EAGAIN) {
++			WARNING(fsg, "usb_ep_set_halt -> %d\n", rc);
++			rc = 0;
++			break;
++		}
++
++		/* Wait for a short time and then try again */
++		if (msleep_interruptible(100) != 0)
++			return -EINTR;
++		rc = usb_ep_set_halt(fsg->bulk_in);
++	}
++	return rc;
++}
++
++static int wedge_bulk_in_endpoint(struct fsg_dev *fsg)
++{
++	int	rc;
++
++	DBG(fsg, "bulk-in set wedge\n");
++	rc = usb_ep_set_wedge(fsg->bulk_in);
++	if (rc == -EAGAIN)
++		VDBG(fsg, "delayed bulk-in endpoint wedge\n");
++	while (rc != 0) {
++		if (rc != -EAGAIN) {
++			WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc);
++			rc = 0;
++			break;
++		}
++
++		/* Wait for a short time and then try again */
++		if (msleep_interruptible(100) != 0)
++			return -EINTR;
++		rc = usb_ep_set_wedge(fsg->bulk_in);
++	}
++	return rc;
++}
++
++static int throw_away_data(struct fsg_dev *fsg)
++{
++	struct fsg_buffhd	*bh;
++	u32			amount;
++	int			rc;
++
++	while ((bh = fsg->next_buffhd_to_drain)->state != BUF_STATE_EMPTY ||
++			fsg->usb_amount_left > 0) {
++
++		/* Throw away the data in a filled buffer */
++		if (bh->state == BUF_STATE_FULL) {
++			smp_rmb();
++			bh->state = BUF_STATE_EMPTY;
++			fsg->next_buffhd_to_drain = bh->next;
++
++			/* A short packet or an error ends everything */
++			if (bh->outreq->actual < bh->bulk_out_intended_length ||
++					bh->outreq->status != 0) {
++				raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
++				return -EINTR;
++			}
++			continue;
++		}
++
++		/* Try to submit another request if we need one */
++		bh = fsg->next_buffhd_to_fill;
++		if (bh->state == BUF_STATE_EMPTY && fsg->usb_amount_left > 0) {
++			amount = min(fsg->usb_amount_left,
++					(u32) mod_data.buflen);
++
++			/* Except at the end of the transfer, amount will be
++			 * equal to the buffer size, which is divisible by
++			 * the bulk-out maxpacket size.
++			 */
++			set_bulk_out_req_length(fsg, bh, amount);
++			start_transfer(fsg, fsg->bulk_out, bh->outreq,
++					&bh->outreq_busy, &bh->state);
++			fsg->next_buffhd_to_fill = bh->next;
++			fsg->usb_amount_left -= amount;
++			continue;
++		}
++
++		/* Otherwise wait for something to happen */
++		rc = sleep_thread(fsg);
++		if (rc)
++			return rc;
++	}
++	return 0;
++}
++
++
++static int finish_reply(struct fsg_dev *fsg)
++{
++	struct fsg_buffhd	*bh = fsg->next_buffhd_to_fill;
++	int			rc = 0;
++
++	switch (fsg->data_dir) {
++	case DATA_DIR_NONE:
++		break;			// Nothing to send
++
++	/* If we don't know whether the host wants to read or write,
++	 * this must be CB or CBI with an unknown command.  We mustn't
++	 * try to send or receive any data.  So stall both bulk pipes
++	 * if we can and wait for a reset. */
++	case DATA_DIR_UNKNOWN:
++		if (mod_data.can_stall) {
++			fsg_set_halt(fsg, fsg->bulk_out);
++			rc = halt_bulk_in_endpoint(fsg);
++		}
++		break;
++
++	/* All but the last buffer of data must have already been sent */
++	case DATA_DIR_TO_HOST:
++		if (fsg->data_size == 0)
++			;		// Nothing to send
++
++		/* If there's no residue, simply send the last buffer */
++		else if (fsg->residue == 0) {
++			bh->inreq->zero = 0;
++			start_transfer(fsg, fsg->bulk_in, bh->inreq,
++					&bh->inreq_busy, &bh->state);
++			fsg->next_buffhd_to_fill = bh->next;
++		}
++
++		/* There is a residue.  For CB and CBI, simply mark the end
++		 * of the data with a short packet.  However, if we are
++		 * allowed to stall, there was no data at all (residue ==
++		 * data_size), and the command failed (invalid LUN or
++		 * sense data is set), then halt the bulk-in endpoint
++		 * instead. */
++		else if (!transport_is_bbb()) {
++			if (mod_data.can_stall &&
++					fsg->residue == fsg->data_size &&
++	(!fsg->curlun || fsg->curlun->sense_data != SS_NO_SENSE)) {
++				bh->state = BUF_STATE_EMPTY;
++				rc = halt_bulk_in_endpoint(fsg);
++			} else {
++				bh->inreq->zero = 1;
++				start_transfer(fsg, fsg->bulk_in, bh->inreq,
++						&bh->inreq_busy, &bh->state);
++				fsg->next_buffhd_to_fill = bh->next;
++			}
++		}
++
++		/*
++		 * For Bulk-only, mark the end of the data with a short
++		 * packet.  If we are allowed to stall, halt the bulk-in
++		 * endpoint.  (Note: This violates the Bulk-Only Transport
++		 * specification, which requires us to pad the data if we
++		 * don't halt the endpoint.  Presumably nobody will mind.)
++		 */
++		else {
++			bh->inreq->zero = 1;
++			start_transfer(fsg, fsg->bulk_in, bh->inreq,
++					&bh->inreq_busy, &bh->state);
++			fsg->next_buffhd_to_fill = bh->next;
++			if (mod_data.can_stall)
++				rc = halt_bulk_in_endpoint(fsg);
++		}
++		break;
++
++	/* We have processed all we want from the data the host has sent.
++	 * There may still be outstanding bulk-out requests. */
++	case DATA_DIR_FROM_HOST:
++		if (fsg->residue == 0)
++			;		// Nothing to receive
++
++		/* Did the host stop sending unexpectedly early? */
++		else if (fsg->short_packet_received) {
++			raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
++			rc = -EINTR;
++		}
++
++		/* We haven't processed all the incoming data.  Even though
++		 * we may be allowed to stall, doing so would cause a race.
++		 * The controller may already have ACK'ed all the remaining
++		 * bulk-out packets, in which case the host wouldn't see a
++		 * STALL.  Not realizing the endpoint was halted, it wouldn't
++		 * clear the halt -- leading to problems later on. */
++#if 0
++		else if (mod_data.can_stall) {
++			fsg_set_halt(fsg, fsg->bulk_out);
++			raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
++			rc = -EINTR;
++		}
++#endif
++
++		/* We can't stall.  Read in the excess data and throw it
++		 * all away. */
++		else
++			rc = throw_away_data(fsg);
++		break;
++	}
++	return rc;
++}
++
++
++static int send_status(struct fsg_dev *fsg)
++{
++	struct fsg_lun		*curlun = fsg->curlun;
++	struct fsg_buffhd	*bh;
++	int			rc;
++	u8			status = US_BULK_STAT_OK;
++	u32			sd, sdinfo = 0;
++
++	/* Wait for the next buffer to become available */
++	bh = fsg->next_buffhd_to_fill;
++	while (bh->state != BUF_STATE_EMPTY) {
++		rc = sleep_thread(fsg);
++		if (rc)
++			return rc;
++	}
++
++	if (curlun) {
++		sd = curlun->sense_data;
++		sdinfo = curlun->sense_data_info;
++	} else if (fsg->bad_lun_okay)
++		sd = SS_NO_SENSE;
++	else
++		sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
++
++	if (fsg->phase_error) {
++		DBG(fsg, "sending phase-error status\n");
++		status = US_BULK_STAT_PHASE;
++		sd = SS_INVALID_COMMAND;
++	} else if (sd != SS_NO_SENSE) {
++		DBG(fsg, "sending command-failure status\n");
++		status = US_BULK_STAT_FAIL;
++		VDBG(fsg, "  sense data: SK x%02x, ASC x%02x, ASCQ x%02x;"
++				"  info x%x\n",
++				SK(sd), ASC(sd), ASCQ(sd), sdinfo);
++	}
++
++	if (transport_is_bbb()) {
++		struct bulk_cs_wrap	*csw = bh->buf;
++
++		/* Store and send the Bulk-only CSW */
++		csw->Signature = cpu_to_le32(US_BULK_CS_SIGN);
++		csw->Tag = fsg->tag;
++		csw->Residue = cpu_to_le32(fsg->residue);
++		csw->Status = status;
++
++		bh->inreq->length = US_BULK_CS_WRAP_LEN;
++		bh->inreq->zero = 0;
++		start_transfer(fsg, fsg->bulk_in, bh->inreq,
++				&bh->inreq_busy, &bh->state);
++
++	} else if (mod_data.transport_type == USB_PR_CB) {
++
++		/* Control-Bulk transport has no status phase! */
++		return 0;
++
++	} else {			// USB_PR_CBI
++		struct interrupt_data	*buf = bh->buf;
++
++		/* Store and send the Interrupt data.  UFI sends the ASC
++		 * and ASCQ bytes.  Everything else sends a Type (which
++		 * is always 0) and the status Value. */
++		if (mod_data.protocol_type == USB_SC_UFI) {
++			buf->bType = ASC(sd);
++			buf->bValue = ASCQ(sd);
++		} else {
++			buf->bType = 0;
++			buf->bValue = status;
++		}
++		fsg->intreq->length = CBI_INTERRUPT_DATA_LEN;
++
++		fsg->intr_buffhd = bh;		// Point to the right buffhd
++		fsg->intreq->buf = bh->inreq->buf;
++		fsg->intreq->context = bh;
++		start_transfer(fsg, fsg->intr_in, fsg->intreq,
++				&fsg->intreq_busy, &bh->state);
++	}
++
++	fsg->next_buffhd_to_fill = bh->next;
++	return 0;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++/* Check whether the command is properly formed and whether its data size
++ * and direction agree with the values we already have. */
++static int check_command(struct fsg_dev *fsg, int cmnd_size,
++		enum data_direction data_dir, unsigned int mask,
++		int needs_medium, const char *name)
++{
++	int			i;
++	int			lun = fsg->cmnd[1] >> 5;
++	static const char	dirletter[4] = {'u', 'o', 'i', 'n'};
++	char			hdlen[20];
++	struct fsg_lun		*curlun;
++
++	/* Adjust the expected cmnd_size for protocol encapsulation padding.
++	 * Transparent SCSI doesn't pad. */
++	if (protocol_is_scsi())
++		;
++
++	/* There's some disagreement as to whether RBC pads commands or not.
++	 * We'll play it safe and accept either form. */
++	else if (mod_data.protocol_type == USB_SC_RBC) {
++		if (fsg->cmnd_size == 12)
++			cmnd_size = 12;
++
++	/* All the other protocols pad to 12 bytes */
++	} else
++		cmnd_size = 12;
++
++	hdlen[0] = 0;
++	if (fsg->data_dir != DATA_DIR_UNKNOWN)
++		sprintf(hdlen, ", H%c=%u", dirletter[(int) fsg->data_dir],
++				fsg->data_size);
++	VDBG(fsg, "SCSI command: %s;  Dc=%d, D%c=%u;  Hc=%d%s\n",
++			name, cmnd_size, dirletter[(int) data_dir],
++			fsg->data_size_from_cmnd, fsg->cmnd_size, hdlen);
++
++	/* We can't reply at all until we know the correct data direction
++	 * and size. */
++	if (fsg->data_size_from_cmnd == 0)
++		data_dir = DATA_DIR_NONE;
++	if (fsg->data_dir == DATA_DIR_UNKNOWN) {	// CB or CBI
++		fsg->data_dir = data_dir;
++		fsg->data_size = fsg->data_size_from_cmnd;
++
++	} else {					// Bulk-only
++		if (fsg->data_size < fsg->data_size_from_cmnd) {
++
++			/* Host data size < Device data size is a phase error.
++			 * Carry out the command, but only transfer as much
++			 * as we are allowed. */
++			fsg->data_size_from_cmnd = fsg->data_size;
++			fsg->phase_error = 1;
++		}
++	}
++	fsg->residue = fsg->usb_amount_left = fsg->data_size;
++
++	/* Conflicting data directions is a phase error */
++	if (fsg->data_dir != data_dir && fsg->data_size_from_cmnd > 0) {
++		fsg->phase_error = 1;
++		return -EINVAL;
++	}
++
++	/* Verify the length of the command itself */
++	if (cmnd_size != fsg->cmnd_size) {
++
++		/* Special case workaround: There are plenty of buggy SCSI
++		 * implementations. Many have issues with cbw->Length
++		 * field passing a wrong command size. For those cases we
++		 * always try to work around the problem by using the length
++		 * sent by the host side provided it is at least as large
++		 * as the correct command length.
++		 * Examples of such cases would be MS-Windows, which issues
++		 * REQUEST SENSE with cbw->Length == 12 where it should
++		 * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and
++		 * REQUEST SENSE with cbw->Length == 10 where it should
++		 * be 6 as well.
++		 */
++		if (cmnd_size <= fsg->cmnd_size) {
++			DBG(fsg, "%s is buggy! Expected length %d "
++					"but we got %d\n", name,
++					cmnd_size, fsg->cmnd_size);
++			cmnd_size = fsg->cmnd_size;
++		} else {
++			fsg->phase_error = 1;
++			return -EINVAL;
++		}
++	}
++
++	/* Check that the LUN values are consistent */
++	if (transport_is_bbb()) {
++		if (fsg->lun != lun)
++			DBG(fsg, "using LUN %d from CBW, "
++					"not LUN %d from CDB\n",
++					fsg->lun, lun);
++	}
++
++	/* Check the LUN */
++	curlun = fsg->curlun;
++	if (curlun) {
++		if (fsg->cmnd[0] != REQUEST_SENSE) {
++			curlun->sense_data = SS_NO_SENSE;
++			curlun->sense_data_info = 0;
++			curlun->info_valid = 0;
++		}
++	} else {
++		fsg->bad_lun_okay = 0;
++
++		/* INQUIRY and REQUEST SENSE commands are explicitly allowed
++		 * to use unsupported LUNs; all others may not. */
++		if (fsg->cmnd[0] != INQUIRY &&
++				fsg->cmnd[0] != REQUEST_SENSE) {
++			DBG(fsg, "unsupported LUN %d\n", fsg->lun);
++			return -EINVAL;
++		}
++	}
++
++	/* If a unit attention condition exists, only INQUIRY and
++	 * REQUEST SENSE commands are allowed; anything else must fail. */
++	if (curlun && curlun->unit_attention_data != SS_NO_SENSE &&
++			fsg->cmnd[0] != INQUIRY &&
++			fsg->cmnd[0] != REQUEST_SENSE) {
++		curlun->sense_data = curlun->unit_attention_data;
++		curlun->unit_attention_data = SS_NO_SENSE;
++		return -EINVAL;
++	}
++
++	/* Check that only command bytes listed in the mask are non-zero */
++	fsg->cmnd[1] &= 0x1f;			// Mask away the LUN
++	for (i = 1; i < cmnd_size; ++i) {
++		if (fsg->cmnd[i] && !(mask & (1 << i))) {
++			if (curlun)
++				curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++			return -EINVAL;
++		}
++	}
++
++	/* If the medium isn't mounted and the command needs to access
++	 * it, return an error. */
++	if (curlun && !fsg_lun_is_open(curlun) && needs_medium) {
++		curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++/* wrapper of check_command for data size in blocks handling */
++static int check_command_size_in_blocks(struct fsg_dev *fsg, int cmnd_size,
++		enum data_direction data_dir, unsigned int mask,
++		int needs_medium, const char *name)
++{
++	if (fsg->curlun)
++		fsg->data_size_from_cmnd <<= fsg->curlun->blkbits;
++	return check_command(fsg, cmnd_size, data_dir,
++			mask, needs_medium, name);
++}
++
++static int do_scsi_command(struct fsg_dev *fsg)
++{
++	struct fsg_buffhd	*bh;
++	int			rc;
++	int			reply = -EINVAL;
++	int			i;
++	static char		unknown[16];
++
++	dump_cdb(fsg);
++
++	/* Wait for the next buffer to become available for data or status */
++	bh = fsg->next_buffhd_to_drain = fsg->next_buffhd_to_fill;
++	while (bh->state != BUF_STATE_EMPTY) {
++		rc = sleep_thread(fsg);
++		if (rc)
++			return rc;
++	}
++	fsg->phase_error = 0;
++	fsg->short_packet_received = 0;
++
++	down_read(&fsg->filesem);	// We're using the backing file
++	switch (fsg->cmnd[0]) {
++
++	case INQUIRY:
++		fsg->data_size_from_cmnd = fsg->cmnd[4];
++		if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
++				(1<<4), 0,
++				"INQUIRY")) == 0)
++			reply = do_inquiry(fsg, bh);
++		break;
++
++	case MODE_SELECT:
++		fsg->data_size_from_cmnd = fsg->cmnd[4];
++		if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST,
++				(1<<1) | (1<<4), 0,
++				"MODE SELECT(6)")) == 0)
++			reply = do_mode_select(fsg, bh);
++		break;
++
++	case MODE_SELECT_10:
++		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
++		if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST,
++				(1<<1) | (3<<7), 0,
++				"MODE SELECT(10)")) == 0)
++			reply = do_mode_select(fsg, bh);
++		break;
++
++	case MODE_SENSE:
++		fsg->data_size_from_cmnd = fsg->cmnd[4];
++		if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
++				(1<<1) | (1<<2) | (1<<4), 0,
++				"MODE SENSE(6)")) == 0)
++			reply = do_mode_sense(fsg, bh);
++		break;
++
++	case MODE_SENSE_10:
++		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
++		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
++				(1<<1) | (1<<2) | (3<<7), 0,
++				"MODE SENSE(10)")) == 0)
++			reply = do_mode_sense(fsg, bh);
++		break;
++
++	case ALLOW_MEDIUM_REMOVAL:
++		fsg->data_size_from_cmnd = 0;
++		if ((reply = check_command(fsg, 6, DATA_DIR_NONE,
++				(1<<4), 0,
++				"PREVENT-ALLOW MEDIUM REMOVAL")) == 0)
++			reply = do_prevent_allow(fsg);
++		break;
++
++	case READ_6:
++		i = fsg->cmnd[4];
++		fsg->data_size_from_cmnd = (i == 0) ? 256 : i;
++		if ((reply = check_command_size_in_blocks(fsg, 6,
++				DATA_DIR_TO_HOST,
++				(7<<1) | (1<<4), 1,
++				"READ(6)")) == 0)
++			reply = do_read(fsg);
++		break;
++
++	case READ_10:
++		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
++		if ((reply = check_command_size_in_blocks(fsg, 10,
++				DATA_DIR_TO_HOST,
++				(1<<1) | (0xf<<2) | (3<<7), 1,
++				"READ(10)")) == 0)
++			reply = do_read(fsg);
++		break;
++
++	case READ_12:
++		fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]);
++		if ((reply = check_command_size_in_blocks(fsg, 12,
++				DATA_DIR_TO_HOST,
++				(1<<1) | (0xf<<2) | (0xf<<6), 1,
++				"READ(12)")) == 0)
++			reply = do_read(fsg);
++		break;
++
++	case READ_CAPACITY:
++		fsg->data_size_from_cmnd = 8;
++		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
++				(0xf<<2) | (1<<8), 1,
++				"READ CAPACITY")) == 0)
++			reply = do_read_capacity(fsg, bh);
++		break;
++
++	case READ_HEADER:
++		if (!mod_data.cdrom)
++			goto unknown_cmnd;
++		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
++		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
++				(3<<7) | (0x1f<<1), 1,
++				"READ HEADER")) == 0)
++			reply = do_read_header(fsg, bh);
++		break;
++
++	case READ_TOC:
++		if (!mod_data.cdrom)
++			goto unknown_cmnd;
++		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
++		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
++				(7<<6) | (1<<1), 1,
++				"READ TOC")) == 0)
++			reply = do_read_toc(fsg, bh);
++		break;
++
++	case READ_FORMAT_CAPACITIES:
++		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
++		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
++				(3<<7), 1,
++				"READ FORMAT CAPACITIES")) == 0)
++			reply = do_read_format_capacities(fsg, bh);
++		break;
++
++	case REQUEST_SENSE:
++		fsg->data_size_from_cmnd = fsg->cmnd[4];
++		if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
++				(1<<4), 0,
++				"REQUEST SENSE")) == 0)
++			reply = do_request_sense(fsg, bh);
++		break;
++
++	case START_STOP:
++		fsg->data_size_from_cmnd = 0;
++		if ((reply = check_command(fsg, 6, DATA_DIR_NONE,
++				(1<<1) | (1<<4), 0,
++				"START-STOP UNIT")) == 0)
++			reply = do_start_stop(fsg);
++		break;
++
++	case SYNCHRONIZE_CACHE:
++		fsg->data_size_from_cmnd = 0;
++		if ((reply = check_command(fsg, 10, DATA_DIR_NONE,
++				(0xf<<2) | (3<<7), 1,
++				"SYNCHRONIZE CACHE")) == 0)
++			reply = do_synchronize_cache(fsg);
++		break;
++
++	case TEST_UNIT_READY:
++		fsg->data_size_from_cmnd = 0;
++		reply = check_command(fsg, 6, DATA_DIR_NONE,
++				0, 1,
++				"TEST UNIT READY");
++		break;
++
++	/* Although optional, this command is used by MS-Windows.  We
++	 * support a minimal version: BytChk must be 0. */
++	case VERIFY:
++		fsg->data_size_from_cmnd = 0;
++		if ((reply = check_command(fsg, 10, DATA_DIR_NONE,
++				(1<<1) | (0xf<<2) | (3<<7), 1,
++				"VERIFY")) == 0)
++			reply = do_verify(fsg);
++		break;
++
++	case WRITE_6:
++		i = fsg->cmnd[4];
++		fsg->data_size_from_cmnd = (i == 0) ? 256 : i;
++		if ((reply = check_command_size_in_blocks(fsg, 6,
++				DATA_DIR_FROM_HOST,
++				(7<<1) | (1<<4), 1,
++				"WRITE(6)")) == 0)
++			reply = do_write(fsg);
++		break;
++
++	case WRITE_10:
++		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
++		if ((reply = check_command_size_in_blocks(fsg, 10,
++				DATA_DIR_FROM_HOST,
++				(1<<1) | (0xf<<2) | (3<<7), 1,
++				"WRITE(10)")) == 0)
++			reply = do_write(fsg);
++		break;
++
++	case WRITE_12:
++		fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]);
++		if ((reply = check_command_size_in_blocks(fsg, 12,
++				DATA_DIR_FROM_HOST,
++				(1<<1) | (0xf<<2) | (0xf<<6), 1,
++				"WRITE(12)")) == 0)
++			reply = do_write(fsg);
++		break;
++
++	/* Some mandatory commands that we recognize but don't implement.
++	 * They don't mean much in this setting.  It's left as an exercise
++	 * for anyone interested to implement RESERVE and RELEASE in terms
++	 * of Posix locks. */
++	case FORMAT_UNIT:
++	case RELEASE:
++	case RESERVE:
++	case SEND_DIAGNOSTIC:
++		// Fall through
++
++	default:
++ unknown_cmnd:
++		fsg->data_size_from_cmnd = 0;
++		sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]);
++		if ((reply = check_command(fsg, fsg->cmnd_size,
++				DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) {
++			fsg->curlun->sense_data = SS_INVALID_COMMAND;
++			reply = -EINVAL;
++		}
++		break;
++	}
++	up_read(&fsg->filesem);
++
++	if (reply == -EINTR || signal_pending(current))
++		return -EINTR;
++
++	/* Set up the single reply buffer for finish_reply() */
++	if (reply == -EINVAL)
++		reply = 0;		// Error reply length
++	if (reply >= 0 && fsg->data_dir == DATA_DIR_TO_HOST) {
++		reply = min((u32) reply, fsg->data_size_from_cmnd);
++		bh->inreq->length = reply;
++		bh->state = BUF_STATE_FULL;
++		fsg->residue -= reply;
++	}				// Otherwise it's already set
++
++	return 0;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{
++	struct usb_request		*req = bh->outreq;
++	struct bulk_cb_wrap	*cbw = req->buf;
++
++	/* Was this a real packet?  Should it be ignored? */
++	if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
++		return -EINVAL;
++
++	/* Is the CBW valid? */
++	if (req->actual != US_BULK_CB_WRAP_LEN ||
++			cbw->Signature != cpu_to_le32(
++				US_BULK_CB_SIGN)) {
++		DBG(fsg, "invalid CBW: len %u sig 0x%x\n",
++				req->actual,
++				le32_to_cpu(cbw->Signature));
++
++		/* The Bulk-only spec says we MUST stall the IN endpoint
++		 * (6.6.1), so it's unavoidable.  It also says we must
++		 * retain this state until the next reset, but there's
++		 * no way to tell the controller driver it should ignore
++		 * Clear-Feature(HALT) requests.
++		 *
++		 * We aren't required to halt the OUT endpoint; instead
++		 * we can simply accept and discard any data received
++		 * until the next reset. */
++		wedge_bulk_in_endpoint(fsg);
++		set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
++		return -EINVAL;
++	}
++
++	/* Is the CBW meaningful? */
++	if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~US_BULK_FLAG_IN ||
++			cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) {
++		DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, "
++				"cmdlen %u\n",
++				cbw->Lun, cbw->Flags, cbw->Length);
++
++		/* We can do anything we want here, so let's stall the
++		 * bulk pipes if we are allowed to. */
++		if (mod_data.can_stall) {
++			fsg_set_halt(fsg, fsg->bulk_out);
++			halt_bulk_in_endpoint(fsg);
++		}
++		return -EINVAL;
++	}
++
++	/* Save the command for later */
++	fsg->cmnd_size = cbw->Length;
++	memcpy(fsg->cmnd, cbw->CDB, fsg->cmnd_size);
++	if (cbw->Flags & US_BULK_FLAG_IN)
++		fsg->data_dir = DATA_DIR_TO_HOST;
++	else
++		fsg->data_dir = DATA_DIR_FROM_HOST;
++	fsg->data_size = le32_to_cpu(cbw->DataTransferLength);
++	if (fsg->data_size == 0)
++		fsg->data_dir = DATA_DIR_NONE;
++	fsg->lun = cbw->Lun;
++	fsg->tag = cbw->Tag;
++	return 0;
++}
++
++
++static int get_next_command(struct fsg_dev *fsg)
++{
++	struct fsg_buffhd	*bh;
++	int			rc = 0;
++
++	if (transport_is_bbb()) {
++
++		/* Wait for the next buffer to become available */
++		bh = fsg->next_buffhd_to_fill;
++		while (bh->state != BUF_STATE_EMPTY) {
++			rc = sleep_thread(fsg);
++			if (rc)
++				return rc;
++		}
++
++		/* Queue a request to read a Bulk-only CBW */
++		set_bulk_out_req_length(fsg, bh, US_BULK_CB_WRAP_LEN);
++		start_transfer(fsg, fsg->bulk_out, bh->outreq,
++				&bh->outreq_busy, &bh->state);
++
++		/* We will drain the buffer in software, which means we
++		 * can reuse it for the next filling.  No need to advance
++		 * next_buffhd_to_fill. */
++
++		/* Wait for the CBW to arrive */
++		while (bh->state != BUF_STATE_FULL) {
++			rc = sleep_thread(fsg);
++			if (rc)
++				return rc;
++		}
++		smp_rmb();
++		rc = received_cbw(fsg, bh);
++		bh->state = BUF_STATE_EMPTY;
++
++	} else {		// USB_PR_CB or USB_PR_CBI
++
++		/* Wait for the next command to arrive */
++		while (fsg->cbbuf_cmnd_size == 0) {
++			rc = sleep_thread(fsg);
++			if (rc)
++				return rc;
++		}
++
++		/* Is the previous status interrupt request still busy?
++		 * The host is allowed to skip reading the status,
++		 * so we must cancel it. */
++		if (fsg->intreq_busy)
++			usb_ep_dequeue(fsg->intr_in, fsg->intreq);
++
++		/* Copy the command and mark the buffer empty */
++		fsg->data_dir = DATA_DIR_UNKNOWN;
++		spin_lock_irq(&fsg->lock);
++		fsg->cmnd_size = fsg->cbbuf_cmnd_size;
++		memcpy(fsg->cmnd, fsg->cbbuf_cmnd, fsg->cmnd_size);
++		fsg->cbbuf_cmnd_size = 0;
++		spin_unlock_irq(&fsg->lock);
++
++		/* Use LUN from the command */
++		fsg->lun = fsg->cmnd[1] >> 5;
++	}
++
++	/* Update current lun */
++	if (fsg->lun >= 0 && fsg->lun < fsg->nluns)
++		fsg->curlun = &fsg->luns[fsg->lun];
++	else
++		fsg->curlun = NULL;
++
++	return rc;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static int enable_endpoint(struct fsg_dev *fsg, struct usb_ep *ep,
++		const struct usb_endpoint_descriptor *d)
++{
++	int	rc;
++
++	ep->driver_data = fsg;
++	ep->desc = d;
++	rc = usb_ep_enable(ep);
++	if (rc)
++		ERROR(fsg, "can't enable %s, result %d\n", ep->name, rc);
++	return rc;
++}
++
++static int alloc_request(struct fsg_dev *fsg, struct usb_ep *ep,
++		struct usb_request **preq)
++{
++	*preq = usb_ep_alloc_request(ep, GFP_ATOMIC);
++	if (*preq)
++		return 0;
++	ERROR(fsg, "can't allocate request for %s\n", ep->name);
++	return -ENOMEM;
++}
++
++/*
++ * Reset interface setting and re-init endpoint state (toggle etc).
++ * Call with altsetting < 0 to disable the interface.  The only other
++ * available altsetting is 0, which enables the interface.
++ */
++static int do_set_interface(struct fsg_dev *fsg, int altsetting)
++{
++	int	rc = 0;
++	int	i;
++	const struct usb_endpoint_descriptor	*d;
++
++	if (fsg->running)
++		DBG(fsg, "reset interface\n");
++
++reset:
++	/* Deallocate the requests */
++	for (i = 0; i < fsg_num_buffers; ++i) {
++		struct fsg_buffhd *bh = &fsg->buffhds[i];
++
++		if (bh->inreq) {
++			usb_ep_free_request(fsg->bulk_in, bh->inreq);
++			bh->inreq = NULL;
++		}
++		if (bh->outreq) {
++			usb_ep_free_request(fsg->bulk_out, bh->outreq);
++			bh->outreq = NULL;
++		}
++	}
++	if (fsg->intreq) {
++		usb_ep_free_request(fsg->intr_in, fsg->intreq);
++		fsg->intreq = NULL;
++	}
++
++	/* Disable the endpoints */
++	if (fsg->bulk_in_enabled) {
++		usb_ep_disable(fsg->bulk_in);
++		fsg->bulk_in_enabled = 0;
++	}
++	if (fsg->bulk_out_enabled) {
++		usb_ep_disable(fsg->bulk_out);
++		fsg->bulk_out_enabled = 0;
++	}
++	if (fsg->intr_in_enabled) {
++		usb_ep_disable(fsg->intr_in);
++		fsg->intr_in_enabled = 0;
++	}
++
++	fsg->running = 0;
++	if (altsetting < 0 || rc != 0)
++		return rc;
++
++	DBG(fsg, "set interface %d\n", altsetting);
++
++	/* Enable the endpoints */
++	d = fsg_ep_desc(fsg->gadget,
++			&fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc,
++			&fsg_ss_bulk_in_desc);
++	if ((rc = enable_endpoint(fsg, fsg->bulk_in, d)) != 0)
++		goto reset;
++	fsg->bulk_in_enabled = 1;
++
++	d = fsg_ep_desc(fsg->gadget,
++			&fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc,
++			&fsg_ss_bulk_out_desc);
++	if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0)
++		goto reset;
++	fsg->bulk_out_enabled = 1;
++	fsg->bulk_out_maxpacket = usb_endpoint_maxp(d);
++	clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
++
++	if (transport_is_cbi()) {
++		d = fsg_ep_desc(fsg->gadget,
++				&fsg_fs_intr_in_desc, &fsg_hs_intr_in_desc,
++				&fsg_ss_intr_in_desc);
++		if ((rc = enable_endpoint(fsg, fsg->intr_in, d)) != 0)
++			goto reset;
++		fsg->intr_in_enabled = 1;
++	}
++
++	/* Allocate the requests */
++	for (i = 0; i < fsg_num_buffers; ++i) {
++		struct fsg_buffhd	*bh = &fsg->buffhds[i];
++
++		if ((rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq)) != 0)
++			goto reset;
++		if ((rc = alloc_request(fsg, fsg->bulk_out, &bh->outreq)) != 0)
++			goto reset;
++		bh->inreq->buf = bh->outreq->buf = bh->buf;
++		bh->inreq->context = bh->outreq->context = bh;
++		bh->inreq->complete = bulk_in_complete;
++		bh->outreq->complete = bulk_out_complete;
++	}
++	if (transport_is_cbi()) {
++		if ((rc = alloc_request(fsg, fsg->intr_in, &fsg->intreq)) != 0)
++			goto reset;
++		fsg->intreq->complete = intr_in_complete;
++	}
++
++	fsg->running = 1;
++	for (i = 0; i < fsg->nluns; ++i)
++		fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED;
++	return rc;
++}
++
++
++/*
++ * Change our operational configuration.  This code must agree with the code
++ * that returns config descriptors, and with interface altsetting code.
++ *
++ * It's also responsible for power management interactions.  Some
++ * configurations might not work with our current power sources.
++ * For now we just assume the gadget is always self-powered.
++ */
++static int do_set_config(struct fsg_dev *fsg, u8 new_config)
++{
++	int	rc = 0;
++
++	/* Disable the single interface */
++	if (fsg->config != 0) {
++		DBG(fsg, "reset config\n");
++		fsg->config = 0;
++		rc = do_set_interface(fsg, -1);
++	}
++
++	/* Enable the interface */
++	if (new_config != 0) {
++		fsg->config = new_config;
++		if ((rc = do_set_interface(fsg, 0)) != 0)
++			fsg->config = 0;	// Reset on errors
++		else
++			INFO(fsg, "%s config #%d\n",
++			     usb_speed_string(fsg->gadget->speed),
++			     fsg->config);
++	}
++	return rc;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static void handle_exception(struct fsg_dev *fsg)
++{
++	siginfo_t		info;
++	int			sig;
++	int			i;
++	int			num_active;
++	struct fsg_buffhd	*bh;
++	enum fsg_state		old_state;
++	u8			new_config;
++	struct fsg_lun		*curlun;
++	unsigned int		exception_req_tag;
++	int			rc;
++
++	/* Clear the existing signals.  Anything but SIGUSR1 is converted
++	 * into a high-priority EXIT exception. */
++	for (;;) {
++		sig = dequeue_signal_lock(current, &current->blocked, &info);
++		if (!sig)
++			break;
++		if (sig != SIGUSR1) {
++			if (fsg->state < FSG_STATE_EXIT)
++				DBG(fsg, "Main thread exiting on signal\n");
++			raise_exception(fsg, FSG_STATE_EXIT);
++		}
++	}
++
++	/* Cancel all the pending transfers */
++	if (fsg->intreq_busy)
++		usb_ep_dequeue(fsg->intr_in, fsg->intreq);
++	for (i = 0; i < fsg_num_buffers; ++i) {
++		bh = &fsg->buffhds[i];
++		if (bh->inreq_busy)
++			usb_ep_dequeue(fsg->bulk_in, bh->inreq);
++		if (bh->outreq_busy)
++			usb_ep_dequeue(fsg->bulk_out, bh->outreq);
++	}
++
++	/* Wait until everything is idle */
++	for (;;) {
++		num_active = fsg->intreq_busy;
++		for (i = 0; i < fsg_num_buffers; ++i) {
++			bh = &fsg->buffhds[i];
++			num_active += bh->inreq_busy + bh->outreq_busy;
++		}
++		if (num_active == 0)
++			break;
++		if (sleep_thread(fsg))
++			return;
++	}
++
++	/* Clear out the controller's fifos */
++	if (fsg->bulk_in_enabled)
++		usb_ep_fifo_flush(fsg->bulk_in);
++	if (fsg->bulk_out_enabled)
++		usb_ep_fifo_flush(fsg->bulk_out);
++	if (fsg->intr_in_enabled)
++		usb_ep_fifo_flush(fsg->intr_in);
++
++	/* Reset the I/O buffer states and pointers, the SCSI
++	 * state, and the exception.  Then invoke the handler. */
++	spin_lock_irq(&fsg->lock);
++
++	for (i = 0; i < fsg_num_buffers; ++i) {
++		bh = &fsg->buffhds[i];
++		bh->state = BUF_STATE_EMPTY;
++	}
++	fsg->next_buffhd_to_fill = fsg->next_buffhd_to_drain =
++			&fsg->buffhds[0];
++
++	exception_req_tag = fsg->exception_req_tag;
++	new_config = fsg->new_config;
++	old_state = fsg->state;
++
++	if (old_state == FSG_STATE_ABORT_BULK_OUT)
++		fsg->state = FSG_STATE_STATUS_PHASE;
++	else {
++		for (i = 0; i < fsg->nluns; ++i) {
++			curlun = &fsg->luns[i];
++			curlun->prevent_medium_removal = 0;
++			curlun->sense_data = curlun->unit_attention_data =
++					SS_NO_SENSE;
++			curlun->sense_data_info = 0;
++			curlun->info_valid = 0;
++		}
++		fsg->state = FSG_STATE_IDLE;
++	}
++	spin_unlock_irq(&fsg->lock);
++
++	/* Carry out any extra actions required for the exception */
++	switch (old_state) {
++	default:
++		break;
++
++	case FSG_STATE_ABORT_BULK_OUT:
++		send_status(fsg);
++		spin_lock_irq(&fsg->lock);
++		if (fsg->state == FSG_STATE_STATUS_PHASE)
++			fsg->state = FSG_STATE_IDLE;
++		spin_unlock_irq(&fsg->lock);
++		break;
++
++	case FSG_STATE_RESET:
++		/* In case we were forced against our will to halt a
++		 * bulk endpoint, clear the halt now.  (The SuperH UDC
++		 * requires this.) */
++		if (test_and_clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
++			usb_ep_clear_halt(fsg->bulk_in);
++
++		if (transport_is_bbb()) {
++			if (fsg->ep0_req_tag == exception_req_tag)
++				ep0_queue(fsg);	// Complete the status stage
++
++		} else if (transport_is_cbi())
++			send_status(fsg);	// Status by interrupt pipe
++
++		/* Technically this should go here, but it would only be
++		 * a waste of time.  Ditto for the INTERFACE_CHANGE and
++		 * CONFIG_CHANGE cases. */
++		// for (i = 0; i < fsg->nluns; ++i)
++		//	fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED;
++		break;
++
++	case FSG_STATE_INTERFACE_CHANGE:
++		rc = do_set_interface(fsg, 0);
++		if (fsg->ep0_req_tag != exception_req_tag)
++			break;
++		if (rc != 0)			// STALL on errors
++			fsg_set_halt(fsg, fsg->ep0);
++		else				// Complete the status stage
++			ep0_queue(fsg);
++		break;
++
++	case FSG_STATE_CONFIG_CHANGE:
++		rc = do_set_config(fsg, new_config);
++		if (fsg->ep0_req_tag != exception_req_tag)
++			break;
++		if (rc != 0)			// STALL on errors
++			fsg_set_halt(fsg, fsg->ep0);
++		else				// Complete the status stage
++			ep0_queue(fsg);
++		break;
++
++	case FSG_STATE_DISCONNECT:
++		for (i = 0; i < fsg->nluns; ++i)
++			fsg_lun_fsync_sub(fsg->luns + i);
++		do_set_config(fsg, 0);		// Unconfigured state
++		break;
++
++	case FSG_STATE_EXIT:
++	case FSG_STATE_TERMINATED:
++		do_set_config(fsg, 0);			// Free resources
++		spin_lock_irq(&fsg->lock);
++		fsg->state = FSG_STATE_TERMINATED;	// Stop the thread
++		spin_unlock_irq(&fsg->lock);
++		break;
++	}
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static int fsg_main_thread(void *fsg_)
++{
++	struct fsg_dev		*fsg = fsg_;
++
++	/* Allow the thread to be killed by a signal, but set the signal mask
++	 * to block everything but INT, TERM, KILL, and USR1. */
++	allow_signal(SIGINT);
++	allow_signal(SIGTERM);
++	allow_signal(SIGKILL);
++	allow_signal(SIGUSR1);
++
++	/* Allow the thread to be frozen */
++	set_freezable();
++
++	/* Arrange for userspace references to be interpreted as kernel
++	 * pointers.  That way we can pass a kernel pointer to a routine
++	 * that expects a __user pointer and it will work okay. */
++	set_fs(get_ds());
++
++	/* The main loop */
++	while (fsg->state != FSG_STATE_TERMINATED) {
++		if (exception_in_progress(fsg) || signal_pending(current)) {
++			handle_exception(fsg);
++			continue;
++		}
++
++		if (!fsg->running) {
++			sleep_thread(fsg);
++			continue;
++		}
++
++		if (get_next_command(fsg))
++			continue;
++
++		spin_lock_irq(&fsg->lock);
++		if (!exception_in_progress(fsg))
++			fsg->state = FSG_STATE_DATA_PHASE;
++		spin_unlock_irq(&fsg->lock);
++
++		if (do_scsi_command(fsg) || finish_reply(fsg))
++			continue;
++
++		spin_lock_irq(&fsg->lock);
++		if (!exception_in_progress(fsg))
++			fsg->state = FSG_STATE_STATUS_PHASE;
++		spin_unlock_irq(&fsg->lock);
++
++		if (send_status(fsg))
++			continue;
++
++		spin_lock_irq(&fsg->lock);
++		if (!exception_in_progress(fsg))
++			fsg->state = FSG_STATE_IDLE;
++		spin_unlock_irq(&fsg->lock);
++		}
++
++	spin_lock_irq(&fsg->lock);
++	fsg->thread_task = NULL;
++	spin_unlock_irq(&fsg->lock);
++
++	/* If we are exiting because of a signal, unregister the
++	 * gadget driver. */
++	if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags))
++		usb_gadget_unregister_driver(&fsg_driver);
++
++	/* Let the unbind and cleanup routines know the thread has exited */
++	complete_and_exit(&fsg->thread_notifier, 0);
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++
++/* The write permissions and store_xxx pointers are set in fsg_bind() */
++static DEVICE_ATTR(ro, 0444, fsg_show_ro, NULL);
++static DEVICE_ATTR(nofua, 0644, fsg_show_nofua, NULL);
++static DEVICE_ATTR(file, 0444, fsg_show_file, NULL);
++
++
++/*-------------------------------------------------------------------------*/
++
++static void fsg_release(struct kref *ref)
++{
++	struct fsg_dev	*fsg = container_of(ref, struct fsg_dev, ref);
++
++	kfree(fsg->luns);
++	kfree(fsg);
++}
++
++static void lun_release(struct device *dev)
++{
++	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
++	struct fsg_dev		*fsg =
++		container_of(filesem, struct fsg_dev, filesem);
++
++	kref_put(&fsg->ref, fsg_release);
++}
++
++static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget)
++{
++	struct fsg_dev		*fsg = get_gadget_data(gadget);
++	int			i;
++	struct fsg_lun		*curlun;
++	struct usb_request	*req = fsg->ep0req;
++
++	DBG(fsg, "unbind\n");
++	clear_bit(REGISTERED, &fsg->atomic_bitflags);
++
++	/* If the thread isn't already dead, tell it to exit now */
++	if (fsg->state != FSG_STATE_TERMINATED) {
++		raise_exception(fsg, FSG_STATE_EXIT);
++		wait_for_completion(&fsg->thread_notifier);
++
++		/* The cleanup routine waits for this completion also */
++		complete(&fsg->thread_notifier);
++	}
++
++	/* Unregister the sysfs attribute files and the LUNs */
++	for (i = 0; i < fsg->nluns; ++i) {
++		curlun = &fsg->luns[i];
++		if (curlun->registered) {
++			device_remove_file(&curlun->dev, &dev_attr_nofua);
++			device_remove_file(&curlun->dev, &dev_attr_ro);
++			device_remove_file(&curlun->dev, &dev_attr_file);
++			fsg_lun_close(curlun);
++			device_unregister(&curlun->dev);
++			curlun->registered = 0;
++		}
++	}
++
++	/* Free the data buffers */
++	for (i = 0; i < fsg_num_buffers; ++i)
++		kfree(fsg->buffhds[i].buf);
++
++	/* Free the request and buffer for endpoint 0 */
++	if (req) {
++		kfree(req->buf);
++		usb_ep_free_request(fsg->ep0, req);
++	}
++
++	set_gadget_data(gadget, NULL);
++}
++
++
++static int __init check_parameters(struct fsg_dev *fsg)
++{
++	int	prot;
++	int	gcnum;
++
++	/* Store the default values */
++	mod_data.transport_type = USB_PR_BULK;
++	mod_data.transport_name = "Bulk-only";
++	mod_data.protocol_type = USB_SC_SCSI;
++	mod_data.protocol_name = "Transparent SCSI";
++
++	/* Some peripheral controllers are known not to be able to
++	 * halt bulk endpoints correctly.  If one of them is present,
++	 * disable stalls.
++	 */
++	if (gadget_is_at91(fsg->gadget))
++		mod_data.can_stall = 0;
++
++	if (mod_data.release == 0xffff) {	// Parameter wasn't set
++		gcnum = usb_gadget_controller_number(fsg->gadget);
++		if (gcnum >= 0)
++			mod_data.release = 0x0300 + gcnum;
++		else {
++			WARNING(fsg, "controller '%s' not recognized\n",
++				fsg->gadget->name);
++			mod_data.release = 0x0399;
++		}
++	}
++
++	prot = simple_strtol(mod_data.protocol_parm, NULL, 0);
++
++#ifdef CONFIG_USB_FILE_STORAGE_TEST
++	if (strnicmp(mod_data.transport_parm, "BBB", 10) == 0) {
++		;		// Use default setting
++	} else if (strnicmp(mod_data.transport_parm, "CB", 10) == 0) {
++		mod_data.transport_type = USB_PR_CB;
++		mod_data.transport_name = "Control-Bulk";
++	} else if (strnicmp(mod_data.transport_parm, "CBI", 10) == 0) {
++		mod_data.transport_type = USB_PR_CBI;
++		mod_data.transport_name = "Control-Bulk-Interrupt";
++	} else {
++		ERROR(fsg, "invalid transport: %s\n", mod_data.transport_parm);
++		return -EINVAL;
++	}
++
++	if (strnicmp(mod_data.protocol_parm, "SCSI", 10) == 0 ||
++			prot == USB_SC_SCSI) {
++		;		// Use default setting
++	} else if (strnicmp(mod_data.protocol_parm, "RBC", 10) == 0 ||
++			prot == USB_SC_RBC) {
++		mod_data.protocol_type = USB_SC_RBC;
++		mod_data.protocol_name = "RBC";
++	} else if (strnicmp(mod_data.protocol_parm, "8020", 4) == 0 ||
++			strnicmp(mod_data.protocol_parm, "ATAPI", 10) == 0 ||
++			prot == USB_SC_8020) {
++		mod_data.protocol_type = USB_SC_8020;
++		mod_data.protocol_name = "8020i (ATAPI)";
++	} else if (strnicmp(mod_data.protocol_parm, "QIC", 3) == 0 ||
++			prot == USB_SC_QIC) {
++		mod_data.protocol_type = USB_SC_QIC;
++		mod_data.protocol_name = "QIC-157";
++	} else if (strnicmp(mod_data.protocol_parm, "UFI", 10) == 0 ||
++			prot == USB_SC_UFI) {
++		mod_data.protocol_type = USB_SC_UFI;
++		mod_data.protocol_name = "UFI";
++	} else if (strnicmp(mod_data.protocol_parm, "8070", 4) == 0 ||
++			prot == USB_SC_8070) {
++		mod_data.protocol_type = USB_SC_8070;
++		mod_data.protocol_name = "8070i";
++	} else {
++		ERROR(fsg, "invalid protocol: %s\n", mod_data.protocol_parm);
++		return -EINVAL;
++	}
++
++	mod_data.buflen &= PAGE_CACHE_MASK;
++	if (mod_data.buflen <= 0) {
++		ERROR(fsg, "invalid buflen\n");
++		return -ETOOSMALL;
++	}
++
++#endif /* CONFIG_USB_FILE_STORAGE_TEST */
++
++	/* Serial string handling.
++	 * On a real device, the serial string would be loaded
++	 * from permanent storage. */
++	if (mod_data.serial) {
++		const char *ch;
++		unsigned len = 0;
++
++		/* Sanity check :
++		 * The CB[I] specification limits the serial string to
++		 * 12 uppercase hexadecimal characters.
++		 * BBB need at least 12 uppercase hexadecimal characters,
++		 * with a maximum of 126. */
++		for (ch = mod_data.serial; *ch; ++ch) {
++			++len;
++			if ((*ch < '0' || *ch > '9') &&
++			    (*ch < 'A' || *ch > 'F')) { /* not uppercase hex */
++				WARNING(fsg,
++					"Invalid serial string character: %c\n",
++					*ch);
++				goto no_serial;
++			}
++		}
++		if (len > 126 ||
++		    (mod_data.transport_type == USB_PR_BULK && len < 12) ||
++		    (mod_data.transport_type != USB_PR_BULK && len > 12)) {
++			WARNING(fsg, "Invalid serial string length!\n");
++			goto no_serial;
++		}
++		fsg_strings[FSG_STRING_SERIAL - 1].s = mod_data.serial;
++	} else {
++		WARNING(fsg, "No serial-number string provided!\n");
++ no_serial:
++		device_desc.iSerialNumber = 0;
++	}
++
++	return 0;
++}
++
++
++static int __init fsg_bind(struct usb_gadget *gadget)
++{
++	struct fsg_dev		*fsg = the_fsg;
++	int			rc;
++	int			i;
++	struct fsg_lun		*curlun;
++	struct usb_ep		*ep;
++	struct usb_request	*req;
++	char			*pathbuf, *p;
++
++	fsg->gadget = gadget;
++	set_gadget_data(gadget, fsg);
++	fsg->ep0 = gadget->ep0;
++	fsg->ep0->driver_data = fsg;
++
++	if ((rc = check_parameters(fsg)) != 0)
++		goto out;
++
++	if (mod_data.removable) {	// Enable the store_xxx attributes
++		dev_attr_file.attr.mode = 0644;
++		dev_attr_file.store = fsg_store_file;
++		if (!mod_data.cdrom) {
++			dev_attr_ro.attr.mode = 0644;
++			dev_attr_ro.store = fsg_store_ro;
++		}
++	}
++
++	/* Only for removable media? */
++	dev_attr_nofua.attr.mode = 0644;
++	dev_attr_nofua.store = fsg_store_nofua;
++
++	/* Find out how many LUNs there should be */
++	i = mod_data.nluns;
++	if (i == 0)
++		i = max(mod_data.num_filenames, 1u);
++	if (i > FSG_MAX_LUNS) {
++		ERROR(fsg, "invalid number of LUNs: %d\n", i);
++		rc = -EINVAL;
++		goto out;
++	}
++
++	/* Create the LUNs, open their backing files, and register the
++	 * LUN devices in sysfs. */
++	fsg->luns = kzalloc(i * sizeof(struct fsg_lun), GFP_KERNEL);
++	if (!fsg->luns) {
++		rc = -ENOMEM;
++		goto out;
++	}
++	fsg->nluns = i;
++
++	for (i = 0; i < fsg->nluns; ++i) {
++		curlun = &fsg->luns[i];
++		curlun->cdrom = !!mod_data.cdrom;
++		curlun->ro = mod_data.cdrom || mod_data.ro[i];
++		curlun->initially_ro = curlun->ro;
++		curlun->removable = mod_data.removable;
++		curlun->nofua = mod_data.nofua[i];
++		curlun->dev.release = lun_release;
++		curlun->dev.parent = &gadget->dev;
++		curlun->dev.driver = &fsg_driver.driver;
++		dev_set_drvdata(&curlun->dev, &fsg->filesem);
++		dev_set_name(&curlun->dev,"%s-lun%d",
++			     dev_name(&gadget->dev), i);
++
++		kref_get(&fsg->ref);
++		rc = device_register(&curlun->dev);
++		if (rc) {
++			INFO(fsg, "failed to register LUN%d: %d\n", i, rc);
++			put_device(&curlun->dev);
++			goto out;
++		}
++		curlun->registered = 1;
++
++		rc = device_create_file(&curlun->dev, &dev_attr_ro);
++		if (rc)
++			goto out;
++		rc = device_create_file(&curlun->dev, &dev_attr_nofua);
++		if (rc)
++			goto out;
++		rc = device_create_file(&curlun->dev, &dev_attr_file);
++		if (rc)
++			goto out;
++
++		if (mod_data.file[i] && *mod_data.file[i]) {
++			rc = fsg_lun_open(curlun, mod_data.file[i]);
++			if (rc)
++				goto out;
++		} else if (!mod_data.removable) {
++			ERROR(fsg, "no file given for LUN%d\n", i);
++			rc = -EINVAL;
++			goto out;
++		}
++	}
++
++	/* Find all the endpoints we will use */
++	usb_ep_autoconfig_reset(gadget);
++	ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc);
++	if (!ep)
++		goto autoconf_fail;
++	ep->driver_data = fsg;		// claim the endpoint
++	fsg->bulk_in = ep;
++
++	ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc);
++	if (!ep)
++		goto autoconf_fail;
++	ep->driver_data = fsg;		// claim the endpoint
++	fsg->bulk_out = ep;
++
++	if (transport_is_cbi()) {
++		ep = usb_ep_autoconfig(gadget, &fsg_fs_intr_in_desc);
++		if (!ep)
++			goto autoconf_fail;
++		ep->driver_data = fsg;		// claim the endpoint
++		fsg->intr_in = ep;
++	}
++
++	/* Fix up the descriptors */
++	device_desc.idVendor = cpu_to_le16(mod_data.vendor);
++	device_desc.idProduct = cpu_to_le16(mod_data.product);
++	device_desc.bcdDevice = cpu_to_le16(mod_data.release);
++
++	i = (transport_is_cbi() ? 3 : 2);	// Number of endpoints
++	fsg_intf_desc.bNumEndpoints = i;
++	fsg_intf_desc.bInterfaceSubClass = mod_data.protocol_type;
++	fsg_intf_desc.bInterfaceProtocol = mod_data.transport_type;
++	fsg_fs_function[i + FSG_FS_FUNCTION_PRE_EP_ENTRIES] = NULL;
++
++	if (gadget_is_dualspeed(gadget)) {
++		fsg_hs_function[i + FSG_HS_FUNCTION_PRE_EP_ENTRIES] = NULL;
++
++		/* Assume endpoint addresses are the same for both speeds */
++		fsg_hs_bulk_in_desc.bEndpointAddress =
++			fsg_fs_bulk_in_desc.bEndpointAddress;
++		fsg_hs_bulk_out_desc.bEndpointAddress =
++			fsg_fs_bulk_out_desc.bEndpointAddress;
++		fsg_hs_intr_in_desc.bEndpointAddress =
++			fsg_fs_intr_in_desc.bEndpointAddress;
++	}
++
++	if (gadget_is_superspeed(gadget)) {
++		unsigned		max_burst;
++
++		fsg_ss_function[i + FSG_SS_FUNCTION_PRE_EP_ENTRIES] = NULL;
++
++		/* Calculate bMaxBurst, we know packet size is 1024 */
++		max_burst = min_t(unsigned, mod_data.buflen / 1024, 15);
++
++		/* Assume endpoint addresses are the same for both speeds */
++		fsg_ss_bulk_in_desc.bEndpointAddress =
++			fsg_fs_bulk_in_desc.bEndpointAddress;
++		fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst;
++
++		fsg_ss_bulk_out_desc.bEndpointAddress =
++			fsg_fs_bulk_out_desc.bEndpointAddress;
++		fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst;
++	}
++
++	if (gadget_is_otg(gadget))
++		fsg_otg_desc.bmAttributes |= USB_OTG_HNP;
++
++	rc = -ENOMEM;
++
++	/* Allocate the request and buffer for endpoint 0 */
++	fsg->ep0req = req = usb_ep_alloc_request(fsg->ep0, GFP_KERNEL);
++	if (!req)
++		goto out;
++	req->buf = kmalloc(EP0_BUFSIZE, GFP_KERNEL);
++	if (!req->buf)
++		goto out;
++	req->complete = ep0_complete;
++
++	/* Allocate the data buffers */
++	for (i = 0; i < fsg_num_buffers; ++i) {
++		struct fsg_buffhd	*bh = &fsg->buffhds[i];
++
++		/* Allocate for the bulk-in endpoint.  We assume that
++		 * the buffer will also work with the bulk-out (and
++		 * interrupt-in) endpoint. */
++		bh->buf = kmalloc(mod_data.buflen, GFP_KERNEL);
++		if (!bh->buf)
++			goto out;
++		bh->next = bh + 1;
++	}
++	fsg->buffhds[fsg_num_buffers - 1].next = &fsg->buffhds[0];
++
++	/* This should reflect the actual gadget power source */
++	usb_gadget_set_selfpowered(gadget);
++
++	snprintf(fsg_string_manufacturer, sizeof fsg_string_manufacturer,
++			"%s %s with %s",
++			init_utsname()->sysname, init_utsname()->release,
++			gadget->name);
++
++	fsg->thread_task = kthread_create(fsg_main_thread, fsg,
++			"file-storage-gadget");
++	if (IS_ERR(fsg->thread_task)) {
++		rc = PTR_ERR(fsg->thread_task);
++		goto out;
++	}
++
++	INFO(fsg, DRIVER_DESC ", version: " DRIVER_VERSION "\n");
++	INFO(fsg, "NOTE: This driver is deprecated.  "
++			"Consider using g_mass_storage instead.\n");
++	INFO(fsg, "Number of LUNs=%d\n", fsg->nluns);
++
++	pathbuf = kmalloc(PATH_MAX, GFP_KERNEL);
++	for (i = 0; i < fsg->nluns; ++i) {
++		curlun = &fsg->luns[i];
++		if (fsg_lun_is_open(curlun)) {
++			p = NULL;
++			if (pathbuf) {
++				p = d_path(&curlun->filp->f_path,
++					   pathbuf, PATH_MAX);
++				if (IS_ERR(p))
++					p = NULL;
++			}
++			LINFO(curlun, "ro=%d, nofua=%d, file: %s\n",
++			      curlun->ro, curlun->nofua, (p ? p : "(error)"));
++		}
++	}
++	kfree(pathbuf);
++
++	DBG(fsg, "transport=%s (x%02x)\n",
++			mod_data.transport_name, mod_data.transport_type);
++	DBG(fsg, "protocol=%s (x%02x)\n",
++			mod_data.protocol_name, mod_data.protocol_type);
++	DBG(fsg, "VendorID=x%04x, ProductID=x%04x, Release=x%04x\n",
++			mod_data.vendor, mod_data.product, mod_data.release);
++	DBG(fsg, "removable=%d, stall=%d, cdrom=%d, buflen=%u\n",
++			mod_data.removable, mod_data.can_stall,
++			mod_data.cdrom, mod_data.buflen);
++	DBG(fsg, "I/O thread pid: %d\n", task_pid_nr(fsg->thread_task));
++
++	set_bit(REGISTERED, &fsg->atomic_bitflags);
++
++	/* Tell the thread to start working */
++	wake_up_process(fsg->thread_task);
++	return 0;
++
++autoconf_fail:
++	ERROR(fsg, "unable to autoconfigure all endpoints\n");
++	rc = -ENOTSUPP;
++
++out:
++	fsg->state = FSG_STATE_TERMINATED;	// The thread is dead
++	fsg_unbind(gadget);
++	complete(&fsg->thread_notifier);
++	return rc;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static void fsg_suspend(struct usb_gadget *gadget)
++{
++	struct fsg_dev		*fsg = get_gadget_data(gadget);
++
++	DBG(fsg, "suspend\n");
++	set_bit(SUSPENDED, &fsg->atomic_bitflags);
++}
++
++static void fsg_resume(struct usb_gadget *gadget)
++{
++	struct fsg_dev		*fsg = get_gadget_data(gadget);
++
++	DBG(fsg, "resume\n");
++	clear_bit(SUSPENDED, &fsg->atomic_bitflags);
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static struct usb_gadget_driver		fsg_driver = {
++	.max_speed	= USB_SPEED_SUPER,
++	.function	= (char *) fsg_string_product,
++	.unbind		= fsg_unbind,
++	.disconnect	= fsg_disconnect,
++	.setup		= fsg_setup,
++	.suspend	= fsg_suspend,
++	.resume		= fsg_resume,
++
++	.driver		= {
++		.name		= DRIVER_NAME,
++		.owner		= THIS_MODULE,
++		// .release = ...
++		// .suspend = ...
++		// .resume = ...
++	},
++};
++
++
++static int __init fsg_alloc(void)
++{
++	struct fsg_dev		*fsg;
++
++	fsg = kzalloc(sizeof *fsg +
++		      fsg_num_buffers * sizeof *(fsg->buffhds), GFP_KERNEL);
++
++	if (!fsg)
++		return -ENOMEM;
++	spin_lock_init(&fsg->lock);
++	init_rwsem(&fsg->filesem);
++	kref_init(&fsg->ref);
++	init_completion(&fsg->thread_notifier);
++
++	the_fsg = fsg;
++	return 0;
++}
++
++
++static int __init fsg_init(void)
++{
++	int		rc;
++	struct fsg_dev	*fsg;
++
++	rc = fsg_num_buffers_validate();
++	if (rc != 0)
++		return rc;
++
++	if ((rc = fsg_alloc()) != 0)
++		return rc;
++	fsg = the_fsg;
++	if ((rc = usb_gadget_probe_driver(&fsg_driver, fsg_bind)) != 0)
++		kref_put(&fsg->ref, fsg_release);
++	return rc;
++}
++module_init(fsg_init);
++
++
++static void __exit fsg_cleanup(void)
++{
++	struct fsg_dev	*fsg = the_fsg;
++
++	/* Unregister the driver iff the thread hasn't already done so */
++	if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags))
++		usb_gadget_unregister_driver(&fsg_driver);
++
++	/* Wait for the thread to finish up */
++	wait_for_completion(&fsg->thread_notifier);
++
++	kref_put(&fsg->ref, fsg_release);
++}
++module_exit(fsg_cleanup);
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_common_port/changes.txt linux-raspberry-pi/drivers/usb/host/dwc_common_port/changes.txt
+--- linux-3.12.6/drivers/usb/host/dwc_common_port/changes.txt	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_common_port/changes.txt	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,174 @@
++
++dwc_read_reg32() and friends now take an additional parameter, a pointer to an
++IO context struct. The IO context struct should live in an os-dependent struct
++in your driver. As an example, the dwc_usb3 driver has an os-dependent struct
++named 'os_dep' embedded in the main device struct. So there these calls look
++like this:
++
++	dwc_read_reg32(&usb3_dev->os_dep.ioctx, &pcd->dev_global_regs->dcfg);
++
++	dwc_write_reg32(&usb3_dev->os_dep.ioctx,
++			&pcd->dev_global_regs->dcfg, 0);
++
++Note that for the existing Linux driver ports, it is not necessary to actually
++define the 'ioctx' member in the os-dependent struct. Since Linux does not
++require an IO context, its macros for dwc_read_reg32() and friends do not
++use the context pointer, so it is optimized away by the compiler. But it is
++necessary to add the pointer parameter to all of the call sites, to be ready
++for any future ports (such as FreeBSD) which do require an IO context.
++
++
++Similarly, dwc_alloc(), dwc_alloc_atomic(), dwc_strdup(), and dwc_free() now
++take an additional parameter, a pointer to a memory context. Examples:
++
++	addr = dwc_alloc(&usb3_dev->os_dep.memctx, size);
++
++	dwc_free(&usb3_dev->os_dep.memctx, addr);
++
++Again, for the Linux ports, it is not necessary to actually define the memctx
++member, but it is necessary to add the pointer parameter to all of the call
++sites.
++
++
++Same for dwc_dma_alloc() and dwc_dma_free(). Examples:
++
++	virt_addr = dwc_dma_alloc(&usb3_dev->os_dep.dmactx, size, &phys_addr);
++
++	dwc_dma_free(&usb3_dev->os_dep.dmactx, size, virt_addr, phys_addr);
++
++
++Same for dwc_mutex_alloc() and dwc_mutex_free(). Examples:
++
++	mutex = dwc_mutex_alloc(&usb3_dev->os_dep.mtxctx);
++
++	dwc_mutex_free(&usb3_dev->os_dep.mtxctx, mutex);
++
++
++Same for dwc_spinlock_alloc() and dwc_spinlock_free(). Examples:
++
++	lock = dwc_spinlock_alloc(&usb3_dev->osdep.splctx);
++
++	dwc_spinlock_free(&usb3_dev->osdep.splctx, lock);
++
++
++Same for dwc_timer_alloc(). Example:
++
++	timer = dwc_timer_alloc(&usb3_dev->os_dep.tmrctx, "dwc_usb3_tmr1",
++				cb_func, cb_data);
++
++
++Same for dwc_waitq_alloc(). Example:
++
++	waitq = dwc_waitq_alloc(&usb3_dev->os_dep.wtqctx);
++
++
++Same for dwc_thread_run(). Example:
++
++	thread = dwc_thread_run(&usb3_dev->os_dep.thdctx, func,
++				"dwc_usb3_thd1", data);
++
++
++Same for dwc_workq_alloc(). Example:
++
++	workq = dwc_workq_alloc(&usb3_dev->osdep.wkqctx, "dwc_usb3_wkq1");
++
++
++Same for dwc_task_alloc(). Example:
++
++	task = dwc_task_alloc(&usb3_dev->os_dep.tskctx, "dwc_usb3_tsk1",
++			      cb_func, cb_data);
++
++
++In addition to the context pointer additions, a few core functions have had
++other changes made to their parameters:
++
++The 'flags' parameter to dwc_spinlock_irqsave() and dwc_spinunlock_irqrestore()
++has been changed from a uint64_t to a dwc_irqflags_t.
++
++dwc_thread_should_stop() now takes a 'dwc_thread_t *' parameter, because the
++FreeBSD equivalent of that function requires it.
++
++And, in addition to the context pointer, dwc_task_alloc() also adds a
++'char *name' parameter, to be consistent with dwc_thread_run() and
++dwc_workq_alloc(), and because the FreeBSD equivalent of that function
++requires a unique name.
++
++
++Here is a complete list of the core functions that now take a pointer to a
++context as their first parameter:
++
++	dwc_read_reg32
++	dwc_read_reg64
++	dwc_write_reg32
++	dwc_write_reg64
++	dwc_modify_reg32
++	dwc_modify_reg64
++	dwc_alloc
++	dwc_alloc_atomic
++	dwc_strdup
++	dwc_free
++	dwc_dma_alloc
++	dwc_dma_free
++	dwc_mutex_alloc
++	dwc_mutex_free
++	dwc_spinlock_alloc
++	dwc_spinlock_free
++	dwc_timer_alloc
++	dwc_waitq_alloc
++	dwc_thread_run
++	dwc_workq_alloc
++	dwc_task_alloc     Also adds a 'char *name' as its 2nd parameter
++
++And here are the core functions that have other changes to their parameters:
++
++	dwc_spinlock_irqsave      'flags' param is now a 'dwc_irqflags_t *'
++	dwc_spinunlock_irqrestore 'flags' param is now a 'dwc_irqflags_t'
++	dwc_thread_should_stop    Adds a 'dwc_thread_t *' parameter
++
++
++
++The changes to the core functions also require some of the other library
++functions to change:
++
++	dwc_cc_if_alloc() and dwc_cc_if_free() now take a 'void *memctx'
++	(for memory allocation) as the 1st param and a 'void *mtxctx'
++	(for mutex allocation) as the 2nd param.
++
++	dwc_cc_clear(), dwc_cc_add(), dwc_cc_change(), dwc_cc_remove(),
++	dwc_cc_data_for_save(), and dwc_cc_restore_from_data() now take a
++	'void *memctx' as the 1st param.
++
++	dwc_dh_modpow(), dwc_dh_pk(), and dwc_dh_derive_keys() now take a
++	'void *memctx' as the 1st param.
++
++	dwc_modpow() now takes a 'void *memctx' as the 1st param.
++
++	dwc_alloc_notification_manager() now takes a 'void *memctx' as the
++	1st param and a 'void *wkqctx' (for work queue allocation) as the 2nd
++	param, and also now returns an integer value that is non-zero if
++	allocation of its data structures or work queue fails.
++
++	dwc_register_notifier() now takes a 'void *memctx' as the 1st param.
++
++	dwc_memory_debug_start() now takes a 'void *mem_ctx' as the first
++	param, and also now returns an integer value that is non-zero if
++	allocation of its data structures fails.
++
++
++
++Other miscellaneous changes:
++
++The DEBUG_MEMORY and DEBUG_REGS #define's have been renamed to
++DWC_DEBUG_MEMORY and DWC_DEBUG_REGS.
++
++The following #define's have been added to allow selectively compiling library
++features:
++
++	DWC_CCLIB
++	DWC_CRYPTOLIB
++	DWC_NOTIFYLIB
++	DWC_UTFLIB
++
++A DWC_LIBMODULE #define has also been added. If this is not defined, then the
++module code in dwc_common_linux.c is not compiled in. This allows linking the
++library code directly into a driver module, instead of as a standalone module.
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_common_port/doc/doxygen.cfg linux-raspberry-pi/drivers/usb/host/dwc_common_port/doc/doxygen.cfg
+--- linux-3.12.6/drivers/usb/host/dwc_common_port/doc/doxygen.cfg	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_common_port/doc/doxygen.cfg	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,270 @@
++# Doxyfile 1.4.5
++
++#---------------------------------------------------------------------------
++# Project related configuration options
++#---------------------------------------------------------------------------
++PROJECT_NAME           = "Synopsys DWC Portability and Common Library for UWB"
++PROJECT_NUMBER         =
++OUTPUT_DIRECTORY       = doc
++CREATE_SUBDIRS         = NO
++OUTPUT_LANGUAGE        = English
++BRIEF_MEMBER_DESC      = YES
++REPEAT_BRIEF           = YES
++ABBREVIATE_BRIEF       = "The $name class" \
++                         "The $name widget" \
++                         "The $name file" \
++                         is \
++                         provides \
++                         specifies \
++                         contains \
++                         represents \
++                         a \
++                         an \
++                         the
++ALWAYS_DETAILED_SEC    = YES
++INLINE_INHERITED_MEMB  = NO
++FULL_PATH_NAMES        = NO
++STRIP_FROM_PATH        = ..
++STRIP_FROM_INC_PATH    =
++SHORT_NAMES            = NO
++JAVADOC_AUTOBRIEF      = YES
++MULTILINE_CPP_IS_BRIEF = NO
++DETAILS_AT_TOP         = YES
++INHERIT_DOCS           = YES
++SEPARATE_MEMBER_PAGES  = NO
++TAB_SIZE               = 8
++ALIASES                =
++OPTIMIZE_OUTPUT_FOR_C  = YES
++OPTIMIZE_OUTPUT_JAVA   = NO
++BUILTIN_STL_SUPPORT    = NO
++DISTRIBUTE_GROUP_DOC   = NO
++SUBGROUPING            = NO
++#---------------------------------------------------------------------------
++# Build related configuration options
++#---------------------------------------------------------------------------
++EXTRACT_ALL            = NO
++EXTRACT_PRIVATE        = NO
++EXTRACT_STATIC         = YES
++EXTRACT_LOCAL_CLASSES  = NO
++EXTRACT_LOCAL_METHODS  = NO
++HIDE_UNDOC_MEMBERS     = NO
++HIDE_UNDOC_CLASSES     = NO
++HIDE_FRIEND_COMPOUNDS  = NO
++HIDE_IN_BODY_DOCS      = NO
++INTERNAL_DOCS          = NO
++CASE_SENSE_NAMES       = YES
++HIDE_SCOPE_NAMES       = NO
++SHOW_INCLUDE_FILES     = NO
++INLINE_INFO            = YES
++SORT_MEMBER_DOCS       = NO
++SORT_BRIEF_DOCS        = NO
++SORT_BY_SCOPE_NAME     = NO
++GENERATE_TODOLIST      = YES
++GENERATE_TESTLIST      = YES
++GENERATE_BUGLIST       = YES
++GENERATE_DEPRECATEDLIST= YES
++ENABLED_SECTIONS       =
++MAX_INITIALIZER_LINES  = 30
++SHOW_USED_FILES        = YES
++SHOW_DIRECTORIES       = YES
++FILE_VERSION_FILTER    =
++#---------------------------------------------------------------------------
++# configuration options related to warning and progress messages
++#---------------------------------------------------------------------------
++QUIET                  = YES
++WARNINGS               = YES
++WARN_IF_UNDOCUMENTED   = NO
++WARN_IF_DOC_ERROR      = YES
++WARN_NO_PARAMDOC       = YES
++WARN_FORMAT            = "$file:$line: $text"
++WARN_LOGFILE           =
++#---------------------------------------------------------------------------
++# configuration options related to the input files
++#---------------------------------------------------------------------------
++INPUT                  = .
++FILE_PATTERNS          = *.c \
++                         *.cc \
++                         *.cxx \
++                         *.cpp \
++                         *.c++ \
++                         *.d \
++                         *.java \
++                         *.ii \
++                         *.ixx \
++                         *.ipp \
++                         *.i++ \
++                         *.inl \
++                         *.h \
++                         *.hh \
++                         *.hxx \
++                         *.hpp \
++                         *.h++ \
++                         *.idl \
++                         *.odl \
++                         *.cs \
++                         *.php \
++                         *.php3 \
++                         *.inc \
++                         *.m \
++                         *.mm \
++                         *.dox \
++                         *.py \
++                         *.C \
++                         *.CC \
++                         *.C++ \
++                         *.II \
++                         *.I++ \
++                         *.H \
++                         *.HH \
++                         *.H++ \
++                         *.CS \
++                         *.PHP \
++                         *.PHP3 \
++                         *.M \
++                         *.MM \
++                         *.PY
++RECURSIVE              = NO
++EXCLUDE                =
++EXCLUDE_SYMLINKS       = NO
++EXCLUDE_PATTERNS       =
++EXAMPLE_PATH           =
++EXAMPLE_PATTERNS       = *
++EXAMPLE_RECURSIVE      = NO
++IMAGE_PATH             =
++INPUT_FILTER           =
++FILTER_PATTERNS        =
++FILTER_SOURCE_FILES    = NO
++#---------------------------------------------------------------------------
++# configuration options related to source browsing
++#---------------------------------------------------------------------------
++SOURCE_BROWSER         = NO
++INLINE_SOURCES         = NO
++STRIP_CODE_COMMENTS    = YES
++REFERENCED_BY_RELATION = YES
++REFERENCES_RELATION    = YES
++USE_HTAGS              = NO
++VERBATIM_HEADERS       = NO
++#---------------------------------------------------------------------------
++# configuration options related to the alphabetical class index
++#---------------------------------------------------------------------------
++ALPHABETICAL_INDEX     = NO
++COLS_IN_ALPHA_INDEX    = 5
++IGNORE_PREFIX          =
++#---------------------------------------------------------------------------
++# configuration options related to the HTML output
++#---------------------------------------------------------------------------
++GENERATE_HTML          = YES
++HTML_OUTPUT            = html
++HTML_FILE_EXTENSION    = .html
++HTML_HEADER            =
++HTML_FOOTER            =
++HTML_STYLESHEET        =
++HTML_ALIGN_MEMBERS     = YES
++GENERATE_HTMLHELP      = NO
++CHM_FILE               =
++HHC_LOCATION           =
++GENERATE_CHI           = NO
++BINARY_TOC             = NO
++TOC_EXPAND             = NO
++DISABLE_INDEX          = NO
++ENUM_VALUES_PER_LINE   = 4
++GENERATE_TREEVIEW      = YES
++TREEVIEW_WIDTH         = 250
++#---------------------------------------------------------------------------
++# configuration options related to the LaTeX output
++#---------------------------------------------------------------------------
++GENERATE_LATEX         = NO
++LATEX_OUTPUT           = latex
++LATEX_CMD_NAME         = latex
++MAKEINDEX_CMD_NAME     = makeindex
++COMPACT_LATEX          = NO
++PAPER_TYPE             = a4wide
++EXTRA_PACKAGES         =
++LATEX_HEADER           =
++PDF_HYPERLINKS         = NO
++USE_PDFLATEX           = NO
++LATEX_BATCHMODE        = NO
++LATEX_HIDE_INDICES     = NO
++#---------------------------------------------------------------------------
++# configuration options related to the RTF output
++#---------------------------------------------------------------------------
++GENERATE_RTF           = NO
++RTF_OUTPUT             = rtf
++COMPACT_RTF            = NO
++RTF_HYPERLINKS         = NO
++RTF_STYLESHEET_FILE    =
++RTF_EXTENSIONS_FILE    =
++#---------------------------------------------------------------------------
++# configuration options related to the man page output
++#---------------------------------------------------------------------------
++GENERATE_MAN           = NO
++MAN_OUTPUT             = man
++MAN_EXTENSION          = .3
++MAN_LINKS              = NO
++#---------------------------------------------------------------------------
++# configuration options related to the XML output
++#---------------------------------------------------------------------------
++GENERATE_XML           = NO
++XML_OUTPUT             = xml
++XML_SCHEMA             =
++XML_DTD                =
++XML_PROGRAMLISTING     = YES
++#---------------------------------------------------------------------------
++# configuration options for the AutoGen Definitions output
++#---------------------------------------------------------------------------
++GENERATE_AUTOGEN_DEF   = NO
++#---------------------------------------------------------------------------
++# configuration options related to the Perl module output
++#---------------------------------------------------------------------------
++GENERATE_PERLMOD       = NO
++PERLMOD_LATEX          = NO
++PERLMOD_PRETTY         = YES
++PERLMOD_MAKEVAR_PREFIX =
++#---------------------------------------------------------------------------
++# Configuration options related to the preprocessor
++#---------------------------------------------------------------------------
++ENABLE_PREPROCESSING   = YES
++MACRO_EXPANSION        = NO
++EXPAND_ONLY_PREDEF     = NO
++SEARCH_INCLUDES        = YES
++INCLUDE_PATH           =
++INCLUDE_FILE_PATTERNS  =
++PREDEFINED             = DEBUG DEBUG_MEMORY
++EXPAND_AS_DEFINED      =
++SKIP_FUNCTION_MACROS   = YES
++#---------------------------------------------------------------------------
++# Configuration::additions related to external references
++#---------------------------------------------------------------------------
++TAGFILES               =
++GENERATE_TAGFILE       =
++ALLEXTERNALS           = NO
++EXTERNAL_GROUPS        = YES
++PERL_PATH              = /usr/bin/perl
++#---------------------------------------------------------------------------
++# Configuration options related to the dot tool
++#---------------------------------------------------------------------------
++CLASS_DIAGRAMS         = YES
++HIDE_UNDOC_RELATIONS   = YES
++HAVE_DOT               = NO
++CLASS_GRAPH            = YES
++COLLABORATION_GRAPH    = YES
++GROUP_GRAPHS           = YES
++UML_LOOK               = NO
++TEMPLATE_RELATIONS     = NO
++INCLUDE_GRAPH          = NO
++INCLUDED_BY_GRAPH      = YES
++CALL_GRAPH             = NO
++GRAPHICAL_HIERARCHY    = YES
++DIRECTORY_GRAPH        = YES
++DOT_IMAGE_FORMAT       = png
++DOT_PATH               =
++DOTFILE_DIRS           =
++MAX_DOT_GRAPH_DEPTH    = 1000
++DOT_TRANSPARENT        = NO
++DOT_MULTI_TARGETS      = NO
++GENERATE_LEGEND        = YES
++DOT_CLEANUP            = YES
++#---------------------------------------------------------------------------
++# Configuration::additions related to the search engine
++#---------------------------------------------------------------------------
++SEARCHENGINE           = NO
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_cc.c linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_cc.c
+--- linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_cc.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_cc.c	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,532 @@
++/* =========================================================================
++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_cc.c $
++ * $Revision: #4 $
++ * $Date: 2010/11/04 $
++ * $Change: 1621692 $
++ *
++ * Synopsys Portability Library Software and documentation
++ * (hereinafter, "Software") is an Unsupported proprietary work of
++ * Synopsys, Inc. unless otherwise expressly agreed to in writing
++ * between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product
++ * under any End User Software License Agreement or Agreement for
++ * Licensed Product with Synopsys or any supplement thereto. You are
++ * permitted to use and redistribute this Software in source and binary
++ * forms, with or without modification, provided that redistributions
++ * of source code must retain this notice. You may not view, use,
++ * disclose, copy or distribute this file or any information contained
++ * herein except pursuant to this license grant from Synopsys. If you
++ * do not agree with this notice, including the disclaimer below, then
++ * you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================= */
++#ifdef DWC_CCLIB
++
++#include "dwc_cc.h"
++
++typedef struct dwc_cc
++{
++	uint32_t uid;
++	uint8_t chid[16];
++	uint8_t cdid[16];
++	uint8_t ck[16];
++	uint8_t *name;
++	uint8_t length;
++        DWC_CIRCLEQ_ENTRY(dwc_cc) list_entry;
++} dwc_cc_t;
++
++DWC_CIRCLEQ_HEAD(context_list, dwc_cc);
++
++/** The main structure for CC management.  */
++struct dwc_cc_if
++{
++	dwc_mutex_t *mutex;
++	char *filename;
++
++	unsigned is_host:1;
++
++	dwc_notifier_t *notifier;
++
++	struct context_list list;
++};
++
++#ifdef DEBUG
++static inline void dump_bytes(char *name, uint8_t *bytes, int len)
++{
++	int i;
++	DWC_PRINTF("%s: ", name);
++	for (i=0; i<len; i++) {
++		DWC_PRINTF("%02x ", bytes[i]);
++	}
++	DWC_PRINTF("\n");
++}
++#else
++#define dump_bytes(x...)
++#endif
++
++static dwc_cc_t *alloc_cc(void *mem_ctx, uint8_t *name, uint32_t length)
++{
++	dwc_cc_t *cc = dwc_alloc(mem_ctx, sizeof(dwc_cc_t));
++	if (!cc) {
++		return NULL;
++	}
++	DWC_MEMSET(cc, 0, sizeof(dwc_cc_t));
++
++	if (name) {
++		cc->length = length;
++		cc->name = dwc_alloc(mem_ctx, length);
++		if (!cc->name) {
++			dwc_free(mem_ctx, cc);
++			return NULL;
++		}
++
++		DWC_MEMCPY(cc->name, name, length);
++	}
++
++	return cc;
++}
++
++static void free_cc(void *mem_ctx, dwc_cc_t *cc)
++{
++	if (cc->name) {
++		dwc_free(mem_ctx, cc->name);
++	}
++	dwc_free(mem_ctx, cc);
++}
++
++static uint32_t next_uid(dwc_cc_if_t *cc_if)
++{
++	uint32_t uid = 0;
++	dwc_cc_t *cc;
++	DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) {
++		if (cc->uid > uid) {
++			uid = cc->uid;
++		}
++	}
++
++	if (uid == 0) {
++		uid = 255;
++	}
++
++	return uid + 1;
++}
++
++static dwc_cc_t *cc_find(dwc_cc_if_t *cc_if, uint32_t uid)
++{
++	dwc_cc_t *cc;
++	DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) {
++		if (cc->uid == uid) {
++			return cc;
++		}
++	}
++	return NULL;
++}
++
++static unsigned int cc_data_size(dwc_cc_if_t *cc_if)
++{
++	unsigned int size = 0;
++	dwc_cc_t *cc;
++	DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) {
++		size += (48 + 1);
++		if (cc->name) {
++			size += cc->length;
++		}
++	}
++	return size;
++}
++
++static uint32_t cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid)
++{
++	uint32_t uid = 0;
++	dwc_cc_t *cc;
++
++	DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) {
++		if (DWC_MEMCMP(cc->chid, chid, 16) == 0) {
++			uid = cc->uid;
++			break;
++		}
++	}
++	return uid;
++}
++static uint32_t cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid)
++{
++	uint32_t uid = 0;
++	dwc_cc_t *cc;
++
++	DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) {
++		if (DWC_MEMCMP(cc->cdid, cdid, 16) == 0) {
++			uid = cc->uid;
++			break;
++		}
++	}
++	return uid;
++}
++
++/* Internal cc_add */
++static int32_t cc_add(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *chid,
++		      uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length)
++{
++	dwc_cc_t *cc;
++	uint32_t uid;
++
++	if (cc_if->is_host) {
++		uid = cc_match_cdid(cc_if, cdid);
++	}
++	else {
++		uid = cc_match_chid(cc_if, chid);
++	}
++
++	if (uid) {
++		DWC_DEBUGC("Replacing previous connection context id=%d name=%p name_len=%d", uid, name, length);
++		cc = cc_find(cc_if, uid);
++	}
++	else {
++		cc = alloc_cc(mem_ctx, name, length);
++		cc->uid = next_uid(cc_if);
++		DWC_CIRCLEQ_INSERT_TAIL(&cc_if->list, cc, list_entry);
++	}
++
++	DWC_MEMCPY(&(cc->chid[0]), chid, 16);
++	DWC_MEMCPY(&(cc->cdid[0]), cdid, 16);
++	DWC_MEMCPY(&(cc->ck[0]), ck, 16);
++
++	DWC_DEBUGC("Added connection context id=%d name=%p name_len=%d", cc->uid, name, length);
++	dump_bytes("CHID", cc->chid, 16);
++	dump_bytes("CDID", cc->cdid, 16);
++	dump_bytes("CK", cc->ck, 16);
++	return cc->uid;
++}
++
++/* Internal cc_clear */
++static void cc_clear(void *mem_ctx, dwc_cc_if_t *cc_if)
++{
++	while (!DWC_CIRCLEQ_EMPTY(&cc_if->list)) {
++		dwc_cc_t *cc = DWC_CIRCLEQ_FIRST(&cc_if->list);
++		DWC_CIRCLEQ_REMOVE_INIT(&cc_if->list, cc, list_entry);
++		free_cc(mem_ctx, cc);
++	}
++}
++
++dwc_cc_if_t *dwc_cc_if_alloc(void *mem_ctx, void *mtx_ctx,
++			     dwc_notifier_t *notifier, unsigned is_host)
++{
++	dwc_cc_if_t *cc_if = NULL;
++
++	/* Allocate a common_cc_if structure */
++	cc_if = dwc_alloc(mem_ctx, sizeof(dwc_cc_if_t));
++
++	if (!cc_if)
++		return NULL;
++
++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES))
++	DWC_MUTEX_ALLOC_LINUX_DEBUG(cc_if->mutex);
++#else
++	cc_if->mutex = dwc_mutex_alloc(mtx_ctx);
++#endif
++	if (!cc_if->mutex) {
++		dwc_free(mem_ctx, cc_if);
++		return NULL;
++	}
++
++	DWC_CIRCLEQ_INIT(&cc_if->list);
++	cc_if->is_host = is_host;
++	cc_if->notifier = notifier;
++	return cc_if;
++}
++
++void dwc_cc_if_free(void *mem_ctx, void *mtx_ctx, dwc_cc_if_t *cc_if)
++{
++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES))
++	DWC_MUTEX_FREE(cc_if->mutex);
++#else
++	dwc_mutex_free(mtx_ctx, cc_if->mutex);
++#endif
++	cc_clear(mem_ctx, cc_if);
++	dwc_free(mem_ctx, cc_if);
++}
++
++static void cc_changed(dwc_cc_if_t *cc_if)
++{
++	if (cc_if->notifier) {
++		dwc_notify(cc_if->notifier, DWC_CC_LIST_CHANGED_NOTIFICATION, cc_if);
++	}
++}
++
++void dwc_cc_clear(void *mem_ctx, dwc_cc_if_t *cc_if)
++{
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	cc_clear(mem_ctx, cc_if);
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++	cc_changed(cc_if);
++}
++
++int32_t dwc_cc_add(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *chid,
++		   uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length)
++{
++	uint32_t uid;
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	uid = cc_add(mem_ctx, cc_if, chid, cdid, ck, name, length);
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++	cc_changed(cc_if);
++
++	return uid;
++}
++
++void dwc_cc_change(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id, uint8_t *chid,
++		   uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length)
++{
++	dwc_cc_t* cc;
++
++	DWC_DEBUGC("Change connection context %d", id);
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	cc = cc_find(cc_if, id);
++	if (!cc) {
++		DWC_ERROR("Uid %d not found in cc list\n", id);
++		DWC_MUTEX_UNLOCK(cc_if->mutex);
++		return;
++	}
++
++	if (chid) {
++		DWC_MEMCPY(&(cc->chid[0]), chid, 16);
++	}
++	if (cdid) {
++		DWC_MEMCPY(&(cc->cdid[0]), cdid, 16);
++	}
++	if (ck) {
++		DWC_MEMCPY(&(cc->ck[0]), ck, 16);
++	}
++
++	if (name) {
++		if (cc->name) {
++			dwc_free(mem_ctx, cc->name);
++		}
++		cc->name = dwc_alloc(mem_ctx, length);
++		if (!cc->name) {
++			DWC_ERROR("Out of memory in dwc_cc_change()\n");
++			DWC_MUTEX_UNLOCK(cc_if->mutex);
++			return;
++		}
++		cc->length = length;
++		DWC_MEMCPY(cc->name, name, length);
++	}
++
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++
++	cc_changed(cc_if);
++
++	DWC_DEBUGC("Changed connection context id=%d\n", id);
++	dump_bytes("New CHID", cc->chid, 16);
++	dump_bytes("New CDID", cc->cdid, 16);
++	dump_bytes("New CK", cc->ck, 16);
++}
++
++void dwc_cc_remove(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id)
++{
++	dwc_cc_t *cc;
++
++	DWC_DEBUGC("Removing connection context %d", id);
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	cc = cc_find(cc_if, id);
++	if (!cc) {
++		DWC_ERROR("Uid %d not found in cc list\n", id);
++		DWC_MUTEX_UNLOCK(cc_if->mutex);
++		return;
++	}
++
++	DWC_CIRCLEQ_REMOVE_INIT(&cc_if->list, cc, list_entry);
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++	free_cc(mem_ctx, cc);
++
++	cc_changed(cc_if);
++}
++
++uint8_t *dwc_cc_data_for_save(void *mem_ctx, dwc_cc_if_t *cc_if, unsigned int *length)
++{
++	uint8_t *buf, *x;
++	uint8_t zero = 0;
++	dwc_cc_t *cc;
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	*length = cc_data_size(cc_if);
++	if (!(*length)) {
++		DWC_MUTEX_UNLOCK(cc_if->mutex);
++		return NULL;
++	}
++
++	DWC_DEBUGC("Creating data for saving (length=%d)", *length);
++
++	buf = dwc_alloc(mem_ctx, *length);
++	if (!buf) {
++		*length = 0;
++		DWC_MUTEX_UNLOCK(cc_if->mutex);
++		return NULL;
++	}
++
++	x = buf;
++	DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) {
++		DWC_MEMCPY(x, cc->chid, 16);
++		x += 16;
++		DWC_MEMCPY(x, cc->cdid, 16);
++		x += 16;
++		DWC_MEMCPY(x, cc->ck, 16);
++		x += 16;
++		if (cc->name) {
++			DWC_MEMCPY(x, &cc->length, 1);
++			x += 1;
++			DWC_MEMCPY(x, cc->name, cc->length);
++			x += cc->length;
++		}
++		else {
++			DWC_MEMCPY(x, &zero, 1);
++			x += 1;
++		}
++	}
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++
++	return buf;
++}
++
++void dwc_cc_restore_from_data(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *data, uint32_t length)
++{
++	uint8_t name_length;
++	uint8_t *name;
++	uint8_t *chid;
++	uint8_t *cdid;
++	uint8_t *ck;
++	uint32_t i = 0;
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	cc_clear(mem_ctx, cc_if);
++
++	while (i < length) {
++		chid = &data[i];
++		i += 16;
++		cdid = &data[i];
++		i += 16;
++		ck = &data[i];
++		i += 16;
++
++		name_length = data[i];
++		i ++;
++
++		if (name_length) {
++			name = &data[i];
++			i += name_length;
++		}
++		else {
++			name = NULL;
++		}
++
++		/* check to see if we haven't overflown the buffer */
++		if (i > length) {
++			DWC_ERROR("Data format error while attempting to load CCs "
++				  "(nlen=%d, iter=%d, buflen=%d).\n", name_length, i, length);
++			break;
++		}
++
++		cc_add(mem_ctx, cc_if, chid, cdid, ck, name, name_length);
++	}
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++
++	cc_changed(cc_if);
++}
++
++uint32_t dwc_cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid)
++{
++	uint32_t uid = 0;
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	uid = cc_match_chid(cc_if, chid);
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++	return uid;
++}
++uint32_t dwc_cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid)
++{
++	uint32_t uid = 0;
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	uid = cc_match_cdid(cc_if, cdid);
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++	return uid;
++}
++
++uint8_t *dwc_cc_ck(dwc_cc_if_t *cc_if, int32_t id)
++{
++	uint8_t *ck = NULL;
++	dwc_cc_t *cc;
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	cc = cc_find(cc_if, id);
++	if (cc) {
++		ck = cc->ck;
++	}
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++
++	return ck;
++
++}
++
++uint8_t *dwc_cc_chid(dwc_cc_if_t *cc_if, int32_t id)
++{
++	uint8_t *retval = NULL;
++	dwc_cc_t *cc;
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	cc = cc_find(cc_if, id);
++	if (cc) {
++		retval = cc->chid;
++	}
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++
++	return retval;
++}
++
++uint8_t *dwc_cc_cdid(dwc_cc_if_t *cc_if, int32_t id)
++{
++	uint8_t *retval = NULL;
++	dwc_cc_t *cc;
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	cc = cc_find(cc_if, id);
++	if (cc) {
++		retval = cc->cdid;
++	}
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++
++	return retval;
++}
++
++uint8_t *dwc_cc_name(dwc_cc_if_t *cc_if, int32_t id, uint8_t *length)
++{
++	uint8_t *retval = NULL;
++	dwc_cc_t *cc;
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	*length = 0;
++	cc = cc_find(cc_if, id);
++	if (cc) {
++		*length = cc->length;
++		retval = cc->name;
++	}
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++
++	return retval;
++}
++
++#endif	/* DWC_CCLIB */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_cc.h linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_cc.h
+--- linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_cc.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_cc.h	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,224 @@
++/* =========================================================================
++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_cc.h $
++ * $Revision: #4 $
++ * $Date: 2010/09/28 $
++ * $Change: 1596182 $
++ *
++ * Synopsys Portability Library Software and documentation
++ * (hereinafter, "Software") is an Unsupported proprietary work of
++ * Synopsys, Inc. unless otherwise expressly agreed to in writing
++ * between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product
++ * under any End User Software License Agreement or Agreement for
++ * Licensed Product with Synopsys or any supplement thereto. You are
++ * permitted to use and redistribute this Software in source and binary
++ * forms, with or without modification, provided that redistributions
++ * of source code must retain this notice. You may not view, use,
++ * disclose, copy or distribute this file or any information contained
++ * herein except pursuant to this license grant from Synopsys. If you
++ * do not agree with this notice, including the disclaimer below, then
++ * you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================= */
++#ifndef _DWC_CC_H_
++#define _DWC_CC_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/** @file
++ *
++ * This file defines the Context Context library.
++ *
++ * The main data structure is dwc_cc_if_t which is returned by either the
++ * dwc_cc_if_alloc function or returned by the module to the user via a provided
++ * function. The data structure is opaque and should only be manipulated via the
++ * functions provied in this API.
++ *
++ * It manages a list of connection contexts and operations can be performed to
++ * add, remove, query, search, and change, those contexts.  Additionally,
++ * a dwc_notifier_t object can be requested from the manager so that
++ * the user can be notified whenever the context list has changed.
++ */
++
++#include "dwc_os.h"
++#include "dwc_list.h"
++#include "dwc_notifier.h"
++
++
++/* Notifications */
++#define DWC_CC_LIST_CHANGED_NOTIFICATION "DWC_CC_LIST_CHANGED_NOTIFICATION"
++
++struct dwc_cc_if;
++typedef struct dwc_cc_if dwc_cc_if_t;
++
++
++/** @name Connection Context Operations */
++/** @{ */
++
++/** This function allocates memory for a dwc_cc_if_t structure, initializes
++ * fields to default values, and returns a pointer to the structure or NULL on
++ * error. */
++extern dwc_cc_if_t *dwc_cc_if_alloc(void *mem_ctx, void *mtx_ctx,
++				    dwc_notifier_t *notifier, unsigned is_host);
++
++/** Frees the memory for the specified CC structure allocated from
++ * dwc_cc_if_alloc(). */
++extern void dwc_cc_if_free(void *mem_ctx, void *mtx_ctx, dwc_cc_if_t *cc_if);
++
++/** Removes all contexts from the connection context list */
++extern void dwc_cc_clear(void *mem_ctx, dwc_cc_if_t *cc_if);
++
++/** Adds a connection context (CHID, CK, CDID, Name) to the connection context list.
++ * If a CHID already exists, the CK and name are overwritten.  Statistics are
++ * not overwritten.
++ *
++ * @param cc_if The cc_if structure.
++ * @param chid A pointer to the 16-byte CHID.  This value will be copied.
++ * @param ck A pointer to the 16-byte CK.  This value will be copied.
++ * @param cdid A pointer to the 16-byte CDID.  This value will be copied.
++ * @param name An optional host friendly name as defined in the association model
++ * spec.  Must be a UTF16-LE unicode string.  Can be NULL to indicated no name.
++ * @param length The length othe unicode string.
++ * @return A unique identifier used to refer to this context that is valid for
++ * as long as this context is still in the list. */
++extern int32_t dwc_cc_add(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *chid,
++			  uint8_t *cdid, uint8_t *ck, uint8_t *name,
++			  uint8_t length);
++
++/** Changes the CHID, CK, CDID, or Name values of a connection context in the
++ * list, preserving any accumulated statistics.  This would typically be called
++ * if the host decideds to change the context with a SET_CONNECTION request.
++ *
++ * @param cc_if The cc_if structure.
++ * @param id The identifier of the connection context.
++ * @param chid A pointer to the 16-byte CHID.  This value will be copied.  NULL
++ * indicates no change.
++ * @param cdid A pointer to the 16-byte CDID.  This value will be copied.  NULL
++ * indicates no change.
++ * @param ck A pointer to the 16-byte CK.  This value will be copied.  NULL
++ * indicates no change.
++ * @param name Host friendly name UTF16-LE.  NULL indicates no change.
++ * @param length Length of name. */
++extern void dwc_cc_change(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id,
++			  uint8_t *chid, uint8_t *cdid, uint8_t *ck,
++			  uint8_t *name, uint8_t length);
++
++/** Remove the specified connection context.
++ * @param cc_if The cc_if structure.
++ * @param id The identifier of the connection context to remove. */
++extern void dwc_cc_remove(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id);
++
++/** Get a binary block of data for the connection context list and attributes.
++ * This data can be used by the OS specific driver to save the connection
++ * context list into non-volatile memory.
++ *
++ * @param cc_if The cc_if structure.
++ * @param length Return the length of the data buffer.
++ * @return A pointer to the data buffer.  The memory for this buffer should be
++ * freed with DWC_FREE() after use. */
++extern uint8_t *dwc_cc_data_for_save(void *mem_ctx, dwc_cc_if_t *cc_if,
++				     unsigned int *length);
++
++/** Restore the connection context list from the binary data that was previously
++ * returned from a call to dwc_cc_data_for_save.  This can be used by the OS specific
++ * driver to load a connection context list from non-volatile memory.
++ *
++ * @param cc_if The cc_if structure.
++ * @param data The data bytes as returned from dwc_cc_data_for_save.
++ * @param length The length of the data. */
++extern void dwc_cc_restore_from_data(void *mem_ctx, dwc_cc_if_t *cc_if,
++				     uint8_t *data, unsigned int length);
++
++/** Find the connection context from the specified CHID.
++ *
++ * @param cc_if The cc_if structure.
++ * @param chid A pointer to the CHID data.
++ * @return A non-zero identifier of the connection context if the CHID matches.
++ * Otherwise returns 0. */
++extern uint32_t dwc_cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid);
++
++/** Find the connection context from the specified CDID.
++ *
++ * @param cc_if The cc_if structure.
++ * @param cdid A pointer to the CDID data.
++ * @return A non-zero identifier of the connection context if the CHID matches.
++ * Otherwise returns 0. */
++extern uint32_t dwc_cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid);
++
++/** Retrieve the CK from the specified connection context.
++ *
++ * @param cc_if The cc_if structure.
++ * @param id The identifier of the connection context.
++ * @return A pointer to the CK data.  The memory does not need to be freed. */
++extern uint8_t *dwc_cc_ck(dwc_cc_if_t *cc_if, int32_t id);
++
++/** Retrieve the CHID from the specified connection context.
++ *
++ * @param cc_if The cc_if structure.
++ * @param id The identifier of the connection context.
++ * @return A pointer to the CHID data.  The memory does not need to be freed. */
++extern uint8_t *dwc_cc_chid(dwc_cc_if_t *cc_if, int32_t id);
++
++/** Retrieve the CDID from the specified connection context.
++ *
++ * @param cc_if The cc_if structure.
++ * @param id The identifier of the connection context.
++ * @return A pointer to the CDID data.  The memory does not need to be freed. */
++extern uint8_t *dwc_cc_cdid(dwc_cc_if_t *cc_if, int32_t id);
++
++extern uint8_t *dwc_cc_name(dwc_cc_if_t *cc_if, int32_t id, uint8_t *length);
++
++/** Checks a buffer for non-zero.
++ * @param id A pointer to a 16 byte buffer.
++ * @return true if the 16 byte value is non-zero. */
++static inline unsigned dwc_assoc_is_not_zero_id(uint8_t *id) {
++	int i;
++	for (i=0; i<16; i++) {
++		if (id[i]) return 1;
++	}
++	return 0;
++}
++
++/** Checks a buffer for zero.
++ * @param id A pointer to a 16 byte buffer.
++ * @return true if the 16 byte value is zero. */
++static inline unsigned dwc_assoc_is_zero_id(uint8_t *id) {
++	return !dwc_assoc_is_not_zero_id(id);
++}
++
++/** Prints an ASCII representation for the 16-byte chid, cdid, or ck, into
++ * buffer. */
++static inline int dwc_print_id_string(char *buffer, uint8_t *id) {
++	char *ptr = buffer;
++	int i;
++	for (i=0; i<16; i++) {
++		ptr += DWC_SPRINTF(ptr, "%02x", id[i]);
++		if (i < 15) {
++			ptr += DWC_SPRINTF(ptr, " ");
++		}
++	}
++	return ptr - buffer;
++}
++
++/** @} */
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _DWC_CC_H_ */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_common_fbsd.c linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_common_fbsd.c
+--- linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_common_fbsd.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_common_fbsd.c	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,1308 @@
++#include "dwc_os.h"
++#include "dwc_list.h"
++
++#ifdef DWC_CCLIB
++# include "dwc_cc.h"
++#endif
++
++#ifdef DWC_CRYPTOLIB
++# include "dwc_modpow.h"
++# include "dwc_dh.h"
++# include "dwc_crypto.h"
++#endif
++
++#ifdef DWC_NOTIFYLIB
++# include "dwc_notifier.h"
++#endif
++
++/* OS-Level Implementations */
++
++/* This is the FreeBSD 7.0 kernel implementation of the DWC platform library. */
++
++
++/* MISC */
++
++void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size)
++{
++	return memset(dest, byte, size);
++}
++
++void *DWC_MEMCPY(void *dest, void const *src, uint32_t size)
++{
++	return memcpy(dest, src, size);
++}
++
++void *DWC_MEMMOVE(void *dest, void *src, uint32_t size)
++{
++	bcopy(src, dest, size);
++	return dest;
++}
++
++int DWC_MEMCMP(void *m1, void *m2, uint32_t size)
++{
++	return memcmp(m1, m2, size);
++}
++
++int DWC_STRNCMP(void *s1, void *s2, uint32_t size)
++{
++	return strncmp(s1, s2, size);
++}
++
++int DWC_STRCMP(void *s1, void *s2)
++{
++	return strcmp(s1, s2);
++}
++
++int DWC_STRLEN(char const *str)
++{
++	return strlen(str);
++}
++
++char *DWC_STRCPY(char *to, char const *from)
++{
++	return strcpy(to, from);
++}
++
++char *DWC_STRDUP(char const *str)
++{
++	int len = DWC_STRLEN(str) + 1;
++	char *new = DWC_ALLOC_ATOMIC(len);
++
++	if (!new) {
++		return NULL;
++	}
++
++	DWC_MEMCPY(new, str, len);
++	return new;
++}
++
++int DWC_ATOI(char *str, int32_t *value)
++{
++	char *end = NULL;
++
++	*value = strtol(str, &end, 0);
++	if (*end == '\0') {
++		return 0;
++	}
++
++	return -1;
++}
++
++int DWC_ATOUI(char *str, uint32_t *value)
++{
++	char *end = NULL;
++
++	*value = strtoul(str, &end, 0);
++	if (*end == '\0') {
++		return 0;
++	}
++
++	return -1;
++}
++
++
++#ifdef DWC_UTFLIB
++/* From usbstring.c */
++
++int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len)
++{
++	int	count = 0;
++	u8	c;
++	u16	uchar;
++
++	/* this insists on correct encodings, though not minimal ones.
++	 * BUT it currently rejects legit 4-byte UTF-8 code points,
++	 * which need surrogate pairs.  (Unicode 3.1 can use them.)
++	 */
++	while (len != 0 && (c = (u8) *s++) != 0) {
++		if (unlikely(c & 0x80)) {
++			// 2-byte sequence:
++			// 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
++			if ((c & 0xe0) == 0xc0) {
++				uchar = (c & 0x1f) << 6;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c;
++
++			// 3-byte sequence (most CJKV characters):
++			// zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
++			} else if ((c & 0xf0) == 0xe0) {
++				uchar = (c & 0x0f) << 12;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c << 6;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c;
++
++				/* no bogus surrogates */
++				if (0xd800 <= uchar && uchar <= 0xdfff)
++					goto fail;
++
++			// 4-byte sequence (surrogate pairs, currently rare):
++			// 11101110wwwwzzzzyy + 110111yyyyxxxxxx
++			//     = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
++			// (uuuuu = wwww + 1)
++			// FIXME accept the surrogate code points (only)
++			} else
++				goto fail;
++		} else
++			uchar = c;
++		put_unaligned (cpu_to_le16 (uchar), cp++);
++		count++;
++		len--;
++	}
++	return count;
++fail:
++	return -1;
++}
++
++#endif	/* DWC_UTFLIB */
++
++
++/* dwc_debug.h */
++
++dwc_bool_t DWC_IN_IRQ(void)
++{
++//	return in_irq();
++	return 0;
++}
++
++dwc_bool_t DWC_IN_BH(void)
++{
++//	return in_softirq();
++	return 0;
++}
++
++void DWC_VPRINTF(char *format, va_list args)
++{
++	vprintf(format, args);
++}
++
++int DWC_VSNPRINTF(char *str, int size, char *format, va_list args)
++{
++	return vsnprintf(str, size, format, args);
++}
++
++void DWC_PRINTF(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++
++int DWC_SPRINTF(char *buffer, char *format, ...)
++{
++	int retval;
++	va_list args;
++
++	va_start(args, format);
++	retval = vsprintf(buffer, format, args);
++	va_end(args);
++	return retval;
++}
++
++int DWC_SNPRINTF(char *buffer, int size, char *format, ...)
++{
++	int retval;
++	va_list args;
++
++	va_start(args, format);
++	retval = vsnprintf(buffer, size, format, args);
++	va_end(args);
++	return retval;
++}
++
++void __DWC_WARN(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++
++void __DWC_ERROR(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++
++void DWC_EXCEPTION(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++//	BUG_ON(1);	???
++}
++
++#ifdef DEBUG
++void __DWC_DEBUG(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++#endif
++
++
++/* dwc_mem.h */
++
++#if 0
++dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size,
++				uint32_t align,
++				uint32_t alloc)
++{
++	struct dma_pool *pool = dma_pool_create("Pool", NULL,
++						size, align, alloc);
++	return (dwc_pool_t *)pool;
++}
++
++void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool)
++{
++	dma_pool_destroy((struct dma_pool *)pool);
++}
++
++void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr)
++{
++//	return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr);
++	return dma_pool_alloc((struct dma_pool *)pool, M_WAITOK, dma_addr);
++}
++
++void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, uint64_t *dma_addr)
++{
++	void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr);
++	memset(..);
++}
++
++void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr)
++{
++	dma_pool_free(pool, vaddr, daddr);
++}
++#endif
++
++static void dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error)
++{
++	if (error)
++		return;
++	*(bus_addr_t *)arg = segs[0].ds_addr;
++}
++
++void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr)
++{
++	dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx;
++	int error;
++
++	error = bus_dma_tag_create(
++#if __FreeBSD_version >= 700000
++			bus_get_dma_tag(dma->dev),	/* parent */
++#else
++			NULL,				/* parent */
++#endif
++			4, 0,				/* alignment, bounds */
++			BUS_SPACE_MAXADDR_32BIT,	/* lowaddr */
++			BUS_SPACE_MAXADDR,		/* highaddr */
++			NULL, NULL,			/* filter, filterarg */
++			size,				/* maxsize */
++			1,				/* nsegments */
++			size,				/* maxsegsize */
++			0,				/* flags */
++			NULL,				/* lockfunc */
++			NULL,				/* lockarg */
++			&dma->dma_tag);
++	if (error) {
++		device_printf(dma->dev, "%s: bus_dma_tag_create failed: %d\n",
++			      __func__, error);
++		goto fail_0;
++	}
++
++	error = bus_dmamem_alloc(dma->dma_tag, &dma->dma_vaddr,
++				 BUS_DMA_NOWAIT | BUS_DMA_COHERENT, &dma->dma_map);
++	if (error) {
++		device_printf(dma->dev, "%s: bus_dmamem_alloc(%ju) failed: %d\n",
++			      __func__, (uintmax_t)size, error);
++		goto fail_1;
++	}
++
++	dma->dma_paddr = 0;
++	error = bus_dmamap_load(dma->dma_tag, dma->dma_map, dma->dma_vaddr, size,
++				dmamap_cb, &dma->dma_paddr, BUS_DMA_NOWAIT);
++	if (error || dma->dma_paddr == 0) {
++		device_printf(dma->dev, "%s: bus_dmamap_load failed: %d\n",
++			      __func__, error);
++		goto fail_2;
++	}
++
++	*dma_addr = dma->dma_paddr;
++	return dma->dma_vaddr;
++
++fail_2:
++	bus_dmamap_unload(dma->dma_tag, dma->dma_map);
++fail_1:
++	bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map);
++	bus_dma_tag_destroy(dma->dma_tag);
++fail_0:
++	dma->dma_map = NULL;
++	dma->dma_tag = NULL;
++
++	return NULL;
++}
++
++void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr)
++{
++	dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx;
++
++	if (dma->dma_tag == NULL)
++		return;
++	if (dma->dma_map != NULL) {
++		bus_dmamap_sync(dma->dma_tag, dma->dma_map,
++				BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
++		bus_dmamap_unload(dma->dma_tag, dma->dma_map);
++		bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map);
++		dma->dma_map = NULL;
++	}
++
++	bus_dma_tag_destroy(dma->dma_tag);
++	dma->dma_tag = NULL;
++}
++
++void *__DWC_ALLOC(void *mem_ctx, uint32_t size)
++{
++	return malloc(size, M_DEVBUF, M_WAITOK | M_ZERO);
++}
++
++void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size)
++{
++	return malloc(size, M_DEVBUF, M_NOWAIT | M_ZERO);
++}
++
++void __DWC_FREE(void *mem_ctx, void *addr)
++{
++	free(addr, M_DEVBUF);
++}
++
++
++#ifdef DWC_CRYPTOLIB
++/* dwc_crypto.h */
++
++void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length)
++{
++	get_random_bytes(buffer, length);
++}
++
++int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out)
++{
++	struct crypto_blkcipher *tfm;
++	struct blkcipher_desc desc;
++	struct scatterlist sgd;
++	struct scatterlist sgs;
++
++	tfm = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC);
++	if (tfm == NULL) {
++		printk("failed to load transform for aes CBC\n");
++		return -1;
++	}
++
++	crypto_blkcipher_setkey(tfm, key, keylen);
++	crypto_blkcipher_set_iv(tfm, iv, 16);
++
++	sg_init_one(&sgd, out, messagelen);
++	sg_init_one(&sgs, message, messagelen);
++
++	desc.tfm = tfm;
++	desc.flags = 0;
++
++	if (crypto_blkcipher_encrypt(&desc, &sgd, &sgs, messagelen)) {
++		crypto_free_blkcipher(tfm);
++		DWC_ERROR("AES CBC encryption failed");
++		return -1;
++	}
++
++	crypto_free_blkcipher(tfm);
++	return 0;
++}
++
++int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out)
++{
++	struct crypto_hash *tfm;
++	struct hash_desc desc;
++	struct scatterlist sg;
++
++	tfm = crypto_alloc_hash("sha256", 0, CRYPTO_ALG_ASYNC);
++	if (IS_ERR(tfm)) {
++		DWC_ERROR("Failed to load transform for sha256: %ld", PTR_ERR(tfm));
++		return 0;
++	}
++	desc.tfm = tfm;
++	desc.flags = 0;
++
++	sg_init_one(&sg, message, len);
++	crypto_hash_digest(&desc, &sg, len, out);
++	crypto_free_hash(tfm);
++
++	return 1;
++}
++
++int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen,
++		    uint8_t *key, uint32_t keylen, uint8_t *out)
++{
++	struct crypto_hash *tfm;
++	struct hash_desc desc;
++	struct scatterlist sg;
++
++	tfm = crypto_alloc_hash("hmac(sha256)", 0, CRYPTO_ALG_ASYNC);
++	if (IS_ERR(tfm)) {
++		DWC_ERROR("Failed to load transform for hmac(sha256): %ld", PTR_ERR(tfm));
++		return 0;
++	}
++	desc.tfm = tfm;
++	desc.flags = 0;
++
++	sg_init_one(&sg, message, messagelen);
++	crypto_hash_setkey(tfm, key, keylen);
++	crypto_hash_digest(&desc, &sg, messagelen, out);
++	crypto_free_hash(tfm);
++
++	return 1;
++}
++
++#endif	/* DWC_CRYPTOLIB */
++
++
++/* Byte Ordering Conversions */
++
++uint32_t DWC_CPU_TO_LE32(uint32_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint32_t DWC_CPU_TO_BE32(uint32_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint32_t DWC_LE32_TO_CPU(uint32_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint32_t DWC_BE32_TO_CPU(uint32_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint16_t DWC_CPU_TO_LE16(uint16_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++uint16_t DWC_CPU_TO_BE16(uint16_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++uint16_t DWC_LE16_TO_CPU(uint16_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++uint16_t DWC_BE16_TO_CPU(uint16_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++
++/* Registers */
++
++uint32_t DWC_READ_REG32(void *io_ctx, uint32_t volatile *reg)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	return bus_space_read_4(io->iot, io->ioh, ior);
++}
++
++#if 0
++uint64_t DWC_READ_REG64(void *io_ctx, uint64_t volatile *reg)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	return bus_space_read_8(io->iot, io->ioh, ior);
++}
++#endif
++
++void DWC_WRITE_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t value)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	bus_space_write_4(io->iot, io->ioh, ior, value);
++}
++
++#if 0
++void DWC_WRITE_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t value)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	bus_space_write_8(io->iot, io->ioh, ior, value);
++}
++#endif
++
++void DWC_MODIFY_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t clear_mask,
++		      uint32_t set_mask)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	bus_space_write_4(io->iot, io->ioh, ior,
++			  (bus_space_read_4(io->iot, io->ioh, ior) &
++			   ~clear_mask) | set_mask);
++}
++
++#if 0
++void DWC_MODIFY_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t clear_mask,
++		      uint64_t set_mask)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	bus_space_write_8(io->iot, io->ioh, ior,
++			  (bus_space_read_8(io->iot, io->ioh, ior) &
++			   ~clear_mask) | set_mask);
++}
++#endif
++
++
++/* Locking */
++
++dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void)
++{
++	struct mtx *sl = DWC_ALLOC(sizeof(*sl));
++
++	if (!sl) {
++		DWC_ERROR("Cannot allocate memory for spinlock");
++		return NULL;
++	}
++
++	mtx_init(sl, "dw3spn", NULL, MTX_SPIN);
++	return (dwc_spinlock_t *)sl;
++}
++
++void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock)
++{
++	struct mtx *sl = (struct mtx *)lock;
++
++	mtx_destroy(sl);
++	DWC_FREE(sl);
++}
++
++void DWC_SPINLOCK(dwc_spinlock_t *lock)
++{
++	mtx_lock_spin((struct mtx *)lock);	// ???
++}
++
++void DWC_SPINUNLOCK(dwc_spinlock_t *lock)
++{
++	mtx_unlock_spin((struct mtx *)lock);	// ???
++}
++
++void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags)
++{
++	mtx_lock_spin((struct mtx *)lock);
++}
++
++void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags)
++{
++	mtx_unlock_spin((struct mtx *)lock);
++}
++
++dwc_mutex_t *DWC_MUTEX_ALLOC(void)
++{
++	struct mtx *m;
++	dwc_mutex_t *mutex = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mtx));
++
++	if (!mutex) {
++		DWC_ERROR("Cannot allocate memory for mutex");
++		return NULL;
++	}
++
++	m = (struct mtx *)mutex;
++	mtx_init(m, "dw3mtx", NULL, MTX_DEF);
++	return mutex;
++}
++
++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES))
++#else
++void DWC_MUTEX_FREE(dwc_mutex_t *mutex)
++{
++	mtx_destroy((struct mtx *)mutex);
++	DWC_FREE(mutex);
++}
++#endif
++
++void DWC_MUTEX_LOCK(dwc_mutex_t *mutex)
++{
++	struct mtx *m = (struct mtx *)mutex;
++
++	mtx_lock(m);
++}
++
++int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex)
++{
++	struct mtx *m = (struct mtx *)mutex;
++
++	return mtx_trylock(m);
++}
++
++void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex)
++{
++	struct mtx *m = (struct mtx *)mutex;
++
++	mtx_unlock(m);
++}
++
++
++/* Timing */
++
++void DWC_UDELAY(uint32_t usecs)
++{
++	DELAY(usecs);
++}
++
++void DWC_MDELAY(uint32_t msecs)
++{
++	do {
++		DELAY(1000);
++	} while (--msecs);
++}
++
++void DWC_MSLEEP(uint32_t msecs)
++{
++	struct timeval tv;
++
++	tv.tv_sec = msecs / 1000;
++	tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000;
++	pause("dw3slp", tvtohz(&tv));
++}
++
++uint32_t DWC_TIME(void)
++{
++	struct timeval tv;
++
++	microuptime(&tv);	// or getmicrouptime? (less precise, but faster)
++	return tv.tv_sec * 1000 + tv.tv_usec / 1000;
++}
++
++
++/* Timers */
++
++struct dwc_timer {
++	struct callout t;
++	char *name;
++	dwc_spinlock_t *lock;
++	dwc_timer_callback_t cb;
++	void *data;
++};
++
++dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data)
++{
++	dwc_timer_t *t = DWC_ALLOC(sizeof(*t));
++
++	if (!t) {
++		DWC_ERROR("Cannot allocate memory for timer");
++		return NULL;
++	}
++
++	callout_init(&t->t, 1);
++
++	t->name = DWC_STRDUP(name);
++	if (!t->name) {
++		DWC_ERROR("Cannot allocate memory for timer->name");
++		goto no_name;
++	}
++
++	t->lock = DWC_SPINLOCK_ALLOC();
++	if (!t->lock) {
++		DWC_ERROR("Cannot allocate memory for lock");
++		goto no_lock;
++	}
++
++	t->cb = cb;
++	t->data = data;
++
++	return t;
++
++ no_lock:
++	DWC_FREE(t->name);
++ no_name:
++	DWC_FREE(t);
++
++	return NULL;
++}
++
++void DWC_TIMER_FREE(dwc_timer_t *timer)
++{
++	callout_stop(&timer->t);
++	DWC_SPINLOCK_FREE(timer->lock);
++	DWC_FREE(timer->name);
++	DWC_FREE(timer);
++}
++
++void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time)
++{
++	struct timeval tv;
++
++	tv.tv_sec = time / 1000;
++	tv.tv_usec = (time - tv.tv_sec * 1000) * 1000;
++	callout_reset(&timer->t, tvtohz(&tv), timer->cb, timer->data);
++}
++
++void DWC_TIMER_CANCEL(dwc_timer_t *timer)
++{
++	callout_stop(&timer->t);
++}
++
++
++/* Wait Queues */
++
++struct dwc_waitq {
++	struct mtx lock;
++	int abort;
++};
++
++dwc_waitq_t *DWC_WAITQ_ALLOC(void)
++{
++	dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq));
++
++	if (!wq) {
++		DWC_ERROR("Cannot allocate memory for waitqueue");
++		return NULL;
++	}
++
++	mtx_init(&wq->lock, "dw3wtq", NULL, MTX_DEF);
++	wq->abort = 0;
++
++	return wq;
++}
++
++void DWC_WAITQ_FREE(dwc_waitq_t *wq)
++{
++	mtx_destroy(&wq->lock);
++	DWC_FREE(wq);
++}
++
++int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data)
++{
++//	intrmask_t ipl;
++	int result = 0;
++
++	mtx_lock(&wq->lock);
++//	ipl = splbio();
++
++	/* Skip the sleep if already aborted or triggered */
++	if (!wq->abort && !cond(data)) {
++//		splx(ipl);
++		result = msleep(wq, &wq->lock, PCATCH, "dw3wat", 0); // infinite timeout
++//		ipl = splbio();
++	}
++
++	if (result == ERESTART) {	// signaled - restart
++		result = -DWC_E_RESTART;
++
++	} else if (result == EINTR) {	// signaled - interrupt
++		result = -DWC_E_ABORT;
++
++	} else if (wq->abort) {
++		result = -DWC_E_ABORT;
++
++	} else {
++		result = 0;
++	}
++
++	wq->abort = 0;
++//	splx(ipl);
++	mtx_unlock(&wq->lock);
++	return result;
++}
++
++int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond,
++			       void *data, int32_t msecs)
++{
++	struct timeval tv, tv1, tv2;
++//	intrmask_t ipl;
++	int result = 0;
++
++	tv.tv_sec = msecs / 1000;
++	tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000;
++
++	mtx_lock(&wq->lock);
++//	ipl = splbio();
++
++	/* Skip the sleep if already aborted or triggered */
++	if (!wq->abort && !cond(data)) {
++//		splx(ipl);
++		getmicrouptime(&tv1);
++		result = msleep(wq, &wq->lock, PCATCH, "dw3wto", tvtohz(&tv));
++		getmicrouptime(&tv2);
++//		ipl = splbio();
++	}
++
++	if (result == 0) {			// awoken
++		if (wq->abort) {
++			result = -DWC_E_ABORT;
++		} else {
++			tv2.tv_usec -= tv1.tv_usec;
++			if (tv2.tv_usec < 0) {
++				tv2.tv_usec += 1000000;
++				tv2.tv_sec--;
++			}
++
++			tv2.tv_sec -= tv1.tv_sec;
++			result = tv2.tv_sec * 1000 + tv2.tv_usec / 1000;
++			result = msecs - result;
++			if (result <= 0)
++				result = 1;
++		}
++	} else if (result == ERESTART) {	// signaled - restart
++		result = -DWC_E_RESTART;
++
++	} else if (result == EINTR) {		// signaled - interrupt
++		result = -DWC_E_ABORT;
++
++	} else {				// timed out
++		result = -DWC_E_TIMEOUT;
++	}
++
++	wq->abort = 0;
++//	splx(ipl);
++	mtx_unlock(&wq->lock);
++	return result;
++}
++
++void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq)
++{
++	wakeup(wq);
++}
++
++void DWC_WAITQ_ABORT(dwc_waitq_t *wq)
++{
++//	intrmask_t ipl;
++
++	mtx_lock(&wq->lock);
++//	ipl = splbio();
++	wq->abort = 1;
++	wakeup(wq);
++//	splx(ipl);
++	mtx_unlock(&wq->lock);
++}
++
++
++/* Threading */
++
++struct dwc_thread {
++	struct proc *proc;
++	int abort;
++};
++
++dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data)
++{
++	int retval;
++	dwc_thread_t *thread = DWC_ALLOC(sizeof(*thread));
++
++	if (!thread) {
++		return NULL;
++	}
++
++	thread->abort = 0;
++	retval = kthread_create((void (*)(void *))func, data, &thread->proc,
++				RFPROC | RFNOWAIT, 0, "%s", name);
++	if (retval) {
++		DWC_FREE(thread);
++		return NULL;
++	}
++
++	return thread;
++}
++
++int DWC_THREAD_STOP(dwc_thread_t *thread)
++{
++	int retval;
++
++	thread->abort = 1;
++	retval = tsleep(&thread->abort, 0, "dw3stp", 60 * hz);
++
++	if (retval == 0) {
++		/* DWC_THREAD_EXIT() will free the thread struct */
++		return 0;
++	}
++
++	/* NOTE: We leak the thread struct if thread doesn't die */
++
++	if (retval == EWOULDBLOCK) {
++		return -DWC_E_TIMEOUT;
++	}
++
++	return -DWC_E_UNKNOWN;
++}
++
++dwc_bool_t DWC_THREAD_SHOULD_STOP(dwc_thread_t *thread)
++{
++	return thread->abort;
++}
++
++void DWC_THREAD_EXIT(dwc_thread_t *thread)
++{
++	wakeup(&thread->abort);
++	DWC_FREE(thread);
++	kthread_exit(0);
++}
++
++
++/* tasklets
++ - Runs in interrupt context (cannot sleep)
++ - Each tasklet runs on a single CPU [ How can we ensure this on FreeBSD? Does it matter? ]
++ - Different tasklets can be running simultaneously on different CPUs [ shouldn't matter ]
++ */
++struct dwc_tasklet {
++	struct task t;
++	dwc_tasklet_callback_t cb;
++	void *data;
++};
++
++static void tasklet_callback(void *data, int pending)	// what to do with pending ???
++{
++	dwc_tasklet_t *task = (dwc_tasklet_t *)data;
++
++	task->cb(task->data);
++}
++
++dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data)
++{
++	dwc_tasklet_t *task = DWC_ALLOC(sizeof(*task));
++
++	if (task) {
++		task->cb = cb;
++		task->data = data;
++		TASK_INIT(&task->t, 0, tasklet_callback, task);
++	} else {
++		DWC_ERROR("Cannot allocate memory for tasklet");
++	}
++
++	return task;
++}
++
++void DWC_TASK_FREE(dwc_tasklet_t *task)
++{
++	taskqueue_drain(taskqueue_fast, &task->t);	// ???
++	DWC_FREE(task);
++}
++
++void DWC_TASK_SCHEDULE(dwc_tasklet_t *task)
++{
++	/* Uses predefined system queue */
++	taskqueue_enqueue_fast(taskqueue_fast, &task->t);
++}
++
++
++/* workqueues
++ - Runs in process context (can sleep)
++ */
++typedef struct work_container {
++	dwc_work_callback_t cb;
++	void *data;
++	dwc_workq_t *wq;
++	char *name;
++	int hz;
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_ENTRY(work_container) entry;
++#endif
++	struct task task;
++} work_container_t;
++
++#ifdef DEBUG
++DWC_CIRCLEQ_HEAD(work_container_queue, work_container);
++#endif
++
++struct dwc_workq {
++	struct taskqueue *taskq;
++	dwc_spinlock_t *lock;
++	dwc_waitq_t *waitq;
++	int pending;
++
++#ifdef DEBUG
++	struct work_container_queue entries;
++#endif
++};
++
++static void do_work(void *data, int pending)	// what to do with pending ???
++{
++	work_container_t *container = (work_container_t *)data;
++	dwc_workq_t *wq = container->wq;
++	dwc_irqflags_t flags;
++
++	if (container->hz) {
++		pause("dw3wrk", container->hz);
++	}
++
++	container->cb(container->data);
++	DWC_DEBUG("Work done: %s, container=%p", container->name, container);
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_REMOVE(&wq->entries, container, entry);
++#endif
++	if (container->name)
++		DWC_FREE(container->name);
++	DWC_FREE(container);
++	wq->pending--;
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++	DWC_WAITQ_TRIGGER(wq->waitq);
++}
++
++static int work_done(void *data)
++{
++	dwc_workq_t *workq = (dwc_workq_t *)data;
++
++	return workq->pending == 0;
++}
++
++int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout)
++{
++	return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout);
++}
++
++dwc_workq_t *DWC_WORKQ_ALLOC(char *name)
++{
++	dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq));
++
++	if (!wq) {
++		DWC_ERROR("Cannot allocate memory for workqueue");
++		return NULL;
++	}
++
++	wq->taskq = taskqueue_create(name, M_NOWAIT, taskqueue_thread_enqueue, &wq->taskq);
++	if (!wq->taskq) {
++		DWC_ERROR("Cannot allocate memory for taskqueue");
++		goto no_taskq;
++	}
++
++	wq->pending = 0;
++
++	wq->lock = DWC_SPINLOCK_ALLOC();
++	if (!wq->lock) {
++		DWC_ERROR("Cannot allocate memory for spinlock");
++		goto no_lock;
++	}
++
++	wq->waitq = DWC_WAITQ_ALLOC();
++	if (!wq->waitq) {
++		DWC_ERROR("Cannot allocate memory for waitqueue");
++		goto no_waitq;
++	}
++
++	taskqueue_start_threads(&wq->taskq, 1, PWAIT, "%s taskq", "dw3tsk");
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_INIT(&wq->entries);
++#endif
++	return wq;
++
++ no_waitq:
++	DWC_SPINLOCK_FREE(wq->lock);
++ no_lock:
++	taskqueue_free(wq->taskq);
++ no_taskq:
++	DWC_FREE(wq);
++
++	return NULL;
++}
++
++void DWC_WORKQ_FREE(dwc_workq_t *wq)
++{
++#ifdef DEBUG
++	dwc_irqflags_t flags;
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++
++	if (wq->pending != 0) {
++		struct work_container *container;
++
++		DWC_ERROR("Destroying work queue with pending work");
++
++		DWC_CIRCLEQ_FOREACH(container, &wq->entries, entry) {
++			DWC_ERROR("Work %s still pending", container->name);
++		}
++	}
++
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++#endif
++	DWC_WAITQ_FREE(wq->waitq);
++	DWC_SPINLOCK_FREE(wq->lock);
++	taskqueue_free(wq->taskq);
++	DWC_FREE(wq);
++}
++
++void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t cb, void *data,
++			char *format, ...)
++{
++	dwc_irqflags_t flags;
++	work_container_t *container;
++	static char name[128];
++	va_list args;
++
++	va_start(args, format);
++	DWC_VSNPRINTF(name, 128, format, args);
++	va_end(args);
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++	wq->pending++;
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++	DWC_WAITQ_TRIGGER(wq->waitq);
++
++	container = DWC_ALLOC_ATOMIC(sizeof(*container));
++	if (!container) {
++		DWC_ERROR("Cannot allocate memory for container");
++		return;
++	}
++
++	container->name = DWC_STRDUP(name);
++	if (!container->name) {
++		DWC_ERROR("Cannot allocate memory for container->name");
++		DWC_FREE(container);
++		return;
++	}
++
++	container->cb = cb;
++	container->data = data;
++	container->wq = wq;
++	container->hz = 0;
++
++	DWC_DEBUG("Queueing work: %s, container=%p", container->name, container);
++
++	TASK_INIT(&container->task, 0, do_work, container);
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry);
++#endif
++	taskqueue_enqueue_fast(wq->taskq, &container->task);
++}
++
++void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t cb,
++				void *data, uint32_t time, char *format, ...)
++{
++	dwc_irqflags_t flags;
++	work_container_t *container;
++	static char name[128];
++	struct timeval tv;
++	va_list args;
++
++	va_start(args, format);
++	DWC_VSNPRINTF(name, 128, format, args);
++	va_end(args);
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++	wq->pending++;
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++	DWC_WAITQ_TRIGGER(wq->waitq);
++
++	container = DWC_ALLOC_ATOMIC(sizeof(*container));
++	if (!container) {
++		DWC_ERROR("Cannot allocate memory for container");
++		return;
++	}
++
++	container->name = DWC_STRDUP(name);
++	if (!container->name) {
++		DWC_ERROR("Cannot allocate memory for container->name");
++		DWC_FREE(container);
++		return;
++	}
++
++	container->cb = cb;
++	container->data = data;
++	container->wq = wq;
++
++	tv.tv_sec = time / 1000;
++	tv.tv_usec = (time - tv.tv_sec * 1000) * 1000;
++	container->hz = tvtohz(&tv);
++
++	DWC_DEBUG("Queueing work: %s, container=%p", container->name, container);
++
++	TASK_INIT(&container->task, 0, do_work, container);
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry);
++#endif
++	taskqueue_enqueue_fast(wq->taskq, &container->task);
++}
++
++int DWC_WORKQ_PENDING(dwc_workq_t *wq)
++{
++	return wq->pending;
++}
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_common_linux.c linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_common_linux.c
+--- linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_common_linux.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_common_linux.c	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,1431 @@
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/kthread.h>
++
++#ifdef DWC_CCLIB
++# include "dwc_cc.h"
++#endif
++
++#ifdef DWC_CRYPTOLIB
++# include "dwc_modpow.h"
++# include "dwc_dh.h"
++# include "dwc_crypto.h"
++#endif
++
++#ifdef DWC_NOTIFYLIB
++# include "dwc_notifier.h"
++#endif
++
++/* OS-Level Implementations */
++
++/* This is the Linux kernel implementation of the DWC platform library. */
++#include <linux/moduleparam.h>
++#include <linux/ctype.h>
++#include <linux/crypto.h>
++#include <linux/delay.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/cdev.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/jiffies.h>
++#include <linux/list.h>
++#include <linux/pci.h>
++#include <linux/random.h>
++#include <linux/scatterlist.h>
++#include <linux/slab.h>
++#include <linux/stat.h>
++#include <linux/string.h>
++#include <linux/timer.h>
++#include <linux/usb.h>
++
++#include <linux/version.h>
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
++# include <linux/usb/gadget.h>
++#else
++# include <linux/usb_gadget.h>
++#endif
++
++#include <asm/io.h>
++#include <asm/page.h>
++#include <asm/uaccess.h>
++#include <asm/unaligned.h>
++
++#include "dwc_os.h"
++#include "dwc_list.h"
++
++
++/* MISC */
++
++void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size)
++{
++	return memset(dest, byte, size);
++}
++
++void *DWC_MEMCPY(void *dest, void const *src, uint32_t size)
++{
++	return memcpy(dest, src, size);
++}
++
++void *DWC_MEMMOVE(void *dest, void *src, uint32_t size)
++{
++	return memmove(dest, src, size);
++}
++
++int DWC_MEMCMP(void *m1, void *m2, uint32_t size)
++{
++	return memcmp(m1, m2, size);
++}
++
++int DWC_STRNCMP(void *s1, void *s2, uint32_t size)
++{
++	return strncmp(s1, s2, size);
++}
++
++int DWC_STRCMP(void *s1, void *s2)
++{
++	return strcmp(s1, s2);
++}
++
++int DWC_STRLEN(char const *str)
++{
++	return strlen(str);
++}
++
++char *DWC_STRCPY(char *to, char const *from)
++{
++	return strcpy(to, from);
++}
++
++char *DWC_STRDUP(char const *str)
++{
++	int len = DWC_STRLEN(str) + 1;
++	char *new = DWC_ALLOC_ATOMIC(len);
++
++	if (!new) {
++		return NULL;
++	}
++
++	DWC_MEMCPY(new, str, len);
++	return new;
++}
++
++int DWC_ATOI(const char *str, int32_t *value)
++{
++	char *end = NULL;
++
++	*value = simple_strtol(str, &end, 0);
++	if (*end == '\0') {
++		return 0;
++	}
++
++	return -1;
++}
++
++int DWC_ATOUI(const char *str, uint32_t *value)
++{
++	char *end = NULL;
++
++	*value = simple_strtoul(str, &end, 0);
++	if (*end == '\0') {
++		return 0;
++	}
++
++	return -1;
++}
++
++
++#ifdef DWC_UTFLIB
++/* From usbstring.c */
++
++int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len)
++{
++	int	count = 0;
++	u8	c;
++	u16	uchar;
++
++	/* this insists on correct encodings, though not minimal ones.
++	 * BUT it currently rejects legit 4-byte UTF-8 code points,
++	 * which need surrogate pairs.  (Unicode 3.1 can use them.)
++	 */
++	while (len != 0 && (c = (u8) *s++) != 0) {
++		if (unlikely(c & 0x80)) {
++			// 2-byte sequence:
++			// 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
++			if ((c & 0xe0) == 0xc0) {
++				uchar = (c & 0x1f) << 6;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c;
++
++			// 3-byte sequence (most CJKV characters):
++			// zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
++			} else if ((c & 0xf0) == 0xe0) {
++				uchar = (c & 0x0f) << 12;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c << 6;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c;
++
++				/* no bogus surrogates */
++				if (0xd800 <= uchar && uchar <= 0xdfff)
++					goto fail;
++
++			// 4-byte sequence (surrogate pairs, currently rare):
++			// 11101110wwwwzzzzyy + 110111yyyyxxxxxx
++			//     = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
++			// (uuuuu = wwww + 1)
++			// FIXME accept the surrogate code points (only)
++			} else
++				goto fail;
++		} else
++			uchar = c;
++		put_unaligned (cpu_to_le16 (uchar), cp++);
++		count++;
++		len--;
++	}
++	return count;
++fail:
++	return -1;
++}
++#endif	/* DWC_UTFLIB */
++
++
++/* dwc_debug.h */
++
++dwc_bool_t DWC_IN_IRQ(void)
++{
++	return in_irq();
++}
++
++dwc_bool_t DWC_IN_BH(void)
++{
++	return in_softirq();
++}
++
++void DWC_VPRINTF(char *format, va_list args)
++{
++	vprintk(format, args);
++}
++
++int DWC_VSNPRINTF(char *str, int size, char *format, va_list args)
++{
++	return vsnprintf(str, size, format, args);
++}
++
++void DWC_PRINTF(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++
++int DWC_SPRINTF(char *buffer, char *format, ...)
++{
++	int retval;
++	va_list args;
++
++	va_start(args, format);
++	retval = vsprintf(buffer, format, args);
++	va_end(args);
++	return retval;
++}
++
++int DWC_SNPRINTF(char *buffer, int size, char *format, ...)
++{
++	int retval;
++	va_list args;
++
++	va_start(args, format);
++	retval = vsnprintf(buffer, size, format, args);
++	va_end(args);
++	return retval;
++}
++
++void __DWC_WARN(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_PRINTF(KERN_WARNING);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++
++void __DWC_ERROR(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_PRINTF(KERN_ERR);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++
++void DWC_EXCEPTION(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_PRINTF(KERN_ERR);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++	BUG_ON(1);
++}
++
++#ifdef DEBUG
++void __DWC_DEBUG(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_PRINTF(KERN_DEBUG);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++#endif
++
++
++/* dwc_mem.h */
++
++#if 0
++dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size,
++				uint32_t align,
++				uint32_t alloc)
++{
++	struct dma_pool *pool = dma_pool_create("Pool", NULL,
++						size, align, alloc);
++	return (dwc_pool_t *)pool;
++}
++
++void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool)
++{
++	dma_pool_destroy((struct dma_pool *)pool);
++}
++
++void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr)
++{
++	return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr);
++}
++
++void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, uint64_t *dma_addr)
++{
++	void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr);
++	memset(..);
++}
++
++void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr)
++{
++	dma_pool_free(pool, vaddr, daddr);
++}
++#endif
++
++void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr)
++{
++#ifdef xxCOSIM /* Only works for 32-bit cosim */
++	void *buf = dma_alloc_coherent(dma_ctx, (size_t)size, dma_addr, GFP_KERNEL);
++#else
++	void *buf = dma_alloc_coherent(dma_ctx, (size_t)size, dma_addr, GFP_KERNEL | GFP_DMA32);
++#endif
++	if (!buf) {
++		return NULL;
++	}
++
++	memset(buf, 0, (size_t)size);
++	return buf;
++}
++
++void *__DWC_DMA_ALLOC_ATOMIC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr)
++{
++	void *buf = dma_alloc_coherent(NULL, (size_t)size, dma_addr, GFP_ATOMIC);
++	if (!buf) {
++		return NULL;
++	}
++	memset(buf, 0, (size_t)size);
++	return buf;
++}
++
++void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr)
++{
++	dma_free_coherent(dma_ctx, size, virt_addr, dma_addr);
++}
++
++void *__DWC_ALLOC(void *mem_ctx, uint32_t size)
++{
++	return kzalloc(size, GFP_KERNEL);
++}
++
++void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size)
++{
++	return kzalloc(size, GFP_ATOMIC);
++}
++
++void __DWC_FREE(void *mem_ctx, void *addr)
++{
++	kfree(addr);
++}
++
++
++#ifdef DWC_CRYPTOLIB
++/* dwc_crypto.h */
++
++void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length)
++{
++	get_random_bytes(buffer, length);
++}
++
++int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out)
++{
++	struct crypto_blkcipher *tfm;
++	struct blkcipher_desc desc;
++	struct scatterlist sgd;
++	struct scatterlist sgs;
++
++	tfm = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC);
++	if (tfm == NULL) {
++		printk("failed to load transform for aes CBC\n");
++		return -1;
++	}
++
++	crypto_blkcipher_setkey(tfm, key, keylen);
++	crypto_blkcipher_set_iv(tfm, iv, 16);
++
++	sg_init_one(&sgd, out, messagelen);
++	sg_init_one(&sgs, message, messagelen);
++
++	desc.tfm = tfm;
++	desc.flags = 0;
++
++	if (crypto_blkcipher_encrypt(&desc, &sgd, &sgs, messagelen)) {
++		crypto_free_blkcipher(tfm);
++		DWC_ERROR("AES CBC encryption failed");
++		return -1;
++	}
++
++	crypto_free_blkcipher(tfm);
++	return 0;
++}
++
++int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out)
++{
++	struct crypto_hash *tfm;
++	struct hash_desc desc;
++	struct scatterlist sg;
++
++	tfm = crypto_alloc_hash("sha256", 0, CRYPTO_ALG_ASYNC);
++	if (IS_ERR(tfm)) {
++		DWC_ERROR("Failed to load transform for sha256: %ld\n", PTR_ERR(tfm));
++		return 0;
++	}
++	desc.tfm = tfm;
++	desc.flags = 0;
++
++	sg_init_one(&sg, message, len);
++	crypto_hash_digest(&desc, &sg, len, out);
++	crypto_free_hash(tfm);
++
++	return 1;
++}
++
++int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen,
++		    uint8_t *key, uint32_t keylen, uint8_t *out)
++{
++	struct crypto_hash *tfm;
++	struct hash_desc desc;
++	struct scatterlist sg;
++
++	tfm = crypto_alloc_hash("hmac(sha256)", 0, CRYPTO_ALG_ASYNC);
++	if (IS_ERR(tfm)) {
++		DWC_ERROR("Failed to load transform for hmac(sha256): %ld\n", PTR_ERR(tfm));
++		return 0;
++	}
++	desc.tfm = tfm;
++	desc.flags = 0;
++
++	sg_init_one(&sg, message, messagelen);
++	crypto_hash_setkey(tfm, key, keylen);
++	crypto_hash_digest(&desc, &sg, messagelen, out);
++	crypto_free_hash(tfm);
++
++	return 1;
++}
++#endif	/* DWC_CRYPTOLIB */
++
++
++/* Byte Ordering Conversions */
++
++uint32_t DWC_CPU_TO_LE32(uint32_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint32_t DWC_CPU_TO_BE32(uint32_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint32_t DWC_LE32_TO_CPU(uint32_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint32_t DWC_BE32_TO_CPU(uint32_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint16_t DWC_CPU_TO_LE16(uint16_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++uint16_t DWC_CPU_TO_BE16(uint16_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++uint16_t DWC_LE16_TO_CPU(uint16_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++uint16_t DWC_BE16_TO_CPU(uint16_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++
++/* Registers */
++
++uint32_t DWC_READ_REG32(uint32_t volatile *reg)
++{
++	return readl(reg);
++}
++
++#if 0
++uint64_t DWC_READ_REG64(uint64_t volatile *reg)
++{
++}
++#endif
++
++void DWC_WRITE_REG32(uint32_t volatile *reg, uint32_t value)
++{
++	writel(value, reg);
++}
++
++#if 0
++void DWC_WRITE_REG64(uint64_t volatile *reg, uint64_t value)
++{
++}
++#endif
++
++void DWC_MODIFY_REG32(uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask)
++{
++	unsigned long flags;
++
++	local_irq_save(flags);
++	local_fiq_disable();
++	writel((readl(reg) & ~clear_mask) | set_mask, reg);
++	local_irq_restore(flags);
++}
++
++#if 0
++void DWC_MODIFY_REG64(uint64_t volatile *reg, uint64_t clear_mask, uint64_t set_mask)
++{
++}
++#endif
++
++
++/* Locking */
++
++dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void)
++{
++	spinlock_t *sl = (spinlock_t *)1;
++
++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP)
++	sl = DWC_ALLOC(sizeof(*sl));
++	if (!sl) {
++		DWC_ERROR("Cannot allocate memory for spinlock\n");
++		return NULL;
++	}
++
++	spin_lock_init(sl);
++#endif
++	return (dwc_spinlock_t *)sl;
++}
++
++void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock)
++{
++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP)
++	DWC_FREE(lock);
++#endif
++}
++
++void DWC_SPINLOCK(dwc_spinlock_t *lock)
++{
++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP)
++	spin_lock((spinlock_t *)lock);
++#endif
++}
++
++void DWC_SPINUNLOCK(dwc_spinlock_t *lock)
++{
++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP)
++	spin_unlock((spinlock_t *)lock);
++#endif
++}
++
++void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags)
++{
++	dwc_irqflags_t f;
++
++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP)
++	spin_lock_irqsave((spinlock_t *)lock, f);
++#else
++	local_irq_save(f);
++#endif
++	*flags = f;
++}
++
++void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags)
++{
++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP)
++	spin_unlock_irqrestore((spinlock_t *)lock, flags);
++#else
++	local_irq_restore(flags);
++#endif
++}
++
++dwc_mutex_t *DWC_MUTEX_ALLOC(void)
++{
++	struct mutex *m;
++	dwc_mutex_t *mutex = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mutex));
++
++	if (!mutex) {
++		DWC_ERROR("Cannot allocate memory for mutex\n");
++		return NULL;
++	}
++
++	m = (struct mutex *)mutex;
++	mutex_init(m);
++	return mutex;
++}
++
++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES))
++#else
++void DWC_MUTEX_FREE(dwc_mutex_t *mutex)
++{
++	mutex_destroy((struct mutex *)mutex);
++	DWC_FREE(mutex);
++}
++#endif
++
++void DWC_MUTEX_LOCK(dwc_mutex_t *mutex)
++{
++	struct mutex *m = (struct mutex *)mutex;
++	mutex_lock(m);
++}
++
++int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex)
++{
++	struct mutex *m = (struct mutex *)mutex;
++	return mutex_trylock(m);
++}
++
++void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex)
++{
++	struct mutex *m = (struct mutex *)mutex;
++	mutex_unlock(m);
++}
++
++
++/* Timing */
++
++void DWC_UDELAY(uint32_t usecs)
++{
++	udelay(usecs);
++}
++
++void DWC_MDELAY(uint32_t msecs)
++{
++	mdelay(msecs);
++}
++
++void DWC_MSLEEP(uint32_t msecs)
++{
++	msleep(msecs);
++}
++
++uint32_t DWC_TIME(void)
++{
++	return jiffies_to_msecs(jiffies);
++}
++
++
++/* Timers */
++
++struct dwc_timer {
++	struct timer_list *t;
++	char *name;
++	dwc_timer_callback_t cb;
++	void *data;
++	uint8_t scheduled;
++	dwc_spinlock_t *lock;
++};
++
++static void timer_callback(unsigned long data)
++{
++	dwc_timer_t *timer = (dwc_timer_t *)data;
++	dwc_irqflags_t flags;
++
++	DWC_SPINLOCK_IRQSAVE(timer->lock, &flags);
++	timer->scheduled = 0;
++	DWC_SPINUNLOCK_IRQRESTORE(timer->lock, flags);
++	DWC_DEBUGC("Timer %s callback", timer->name);
++	timer->cb(timer->data);
++}
++
++dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data)
++{
++	dwc_timer_t *t = DWC_ALLOC(sizeof(*t));
++
++	if (!t) {
++		DWC_ERROR("Cannot allocate memory for timer");
++		return NULL;
++	}
++
++	t->t = DWC_ALLOC(sizeof(*t->t));
++	if (!t->t) {
++		DWC_ERROR("Cannot allocate memory for timer->t");
++		goto no_timer;
++	}
++
++	t->name = DWC_STRDUP(name);
++	if (!t->name) {
++		DWC_ERROR("Cannot allocate memory for timer->name");
++		goto no_name;
++	}
++
++	t->lock = DWC_SPINLOCK_ALLOC();
++	if (!t->lock) {
++		DWC_ERROR("Cannot allocate memory for lock");
++		goto no_lock;
++	}
++
++	t->scheduled = 0;
++	t->t->base = &boot_tvec_bases;
++	t->t->expires = jiffies;
++	setup_timer(t->t, timer_callback, (unsigned long)t);
++
++	t->cb = cb;
++	t->data = data;
++
++	return t;
++
++ no_lock:
++	DWC_FREE(t->name);
++ no_name:
++	DWC_FREE(t->t);
++ no_timer:
++	DWC_FREE(t);
++	return NULL;
++}
++
++void DWC_TIMER_FREE(dwc_timer_t *timer)
++{
++	dwc_irqflags_t flags;
++
++	DWC_SPINLOCK_IRQSAVE(timer->lock, &flags);
++
++	if (timer->scheduled) {
++		del_timer(timer->t);
++		timer->scheduled = 0;
++	}
++
++	DWC_SPINUNLOCK_IRQRESTORE(timer->lock, flags);
++	DWC_SPINLOCK_FREE(timer->lock);
++	DWC_FREE(timer->t);
++	DWC_FREE(timer->name);
++	DWC_FREE(timer);
++}
++
++void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time)
++{
++	dwc_irqflags_t flags;
++
++	DWC_SPINLOCK_IRQSAVE(timer->lock, &flags);
++
++	if (!timer->scheduled) {
++		timer->scheduled = 1;
++		DWC_DEBUGC("Scheduling timer %s to expire in +%d msec", timer->name, time);
++		timer->t->expires = jiffies + msecs_to_jiffies(time);
++		add_timer(timer->t);
++	} else {
++		DWC_DEBUGC("Modifying timer %s to expire in +%d msec", timer->name, time);
++		mod_timer(timer->t, jiffies + msecs_to_jiffies(time));
++	}
++
++	DWC_SPINUNLOCK_IRQRESTORE(timer->lock, flags);
++}
++
++void DWC_TIMER_CANCEL(dwc_timer_t *timer)
++{
++	del_timer(timer->t);
++}
++
++
++/* Wait Queues */
++
++struct dwc_waitq {
++	wait_queue_head_t queue;
++	int abort;
++};
++
++dwc_waitq_t *DWC_WAITQ_ALLOC(void)
++{
++	dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq));
++
++	if (!wq) {
++		DWC_ERROR("Cannot allocate memory for waitqueue\n");
++		return NULL;
++	}
++
++	init_waitqueue_head(&wq->queue);
++	wq->abort = 0;
++	return wq;
++}
++
++void DWC_WAITQ_FREE(dwc_waitq_t *wq)
++{
++	DWC_FREE(wq);
++}
++
++int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data)
++{
++	int result = wait_event_interruptible(wq->queue,
++					      cond(data) || wq->abort);
++	if (result == -ERESTARTSYS) {
++		wq->abort = 0;
++		return -DWC_E_RESTART;
++	}
++
++	if (wq->abort == 1) {
++		wq->abort = 0;
++		return -DWC_E_ABORT;
++	}
++
++	wq->abort = 0;
++
++	if (result == 0) {
++		return 0;
++	}
++
++	return -DWC_E_UNKNOWN;
++}
++
++int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond,
++			       void *data, int32_t msecs)
++{
++	int32_t tmsecs;
++	int result = wait_event_interruptible_timeout(wq->queue,
++						      cond(data) || wq->abort,
++						      msecs_to_jiffies(msecs));
++	if (result == -ERESTARTSYS) {
++		wq->abort = 0;
++		return -DWC_E_RESTART;
++	}
++
++	if (wq->abort == 1) {
++		wq->abort = 0;
++		return -DWC_E_ABORT;
++	}
++
++	wq->abort = 0;
++
++	if (result > 0) {
++		tmsecs = jiffies_to_msecs(result);
++		if (!tmsecs) {
++			return 1;
++		}
++
++		return tmsecs;
++	}
++
++	if (result == 0) {
++		return -DWC_E_TIMEOUT;
++	}
++
++	return -DWC_E_UNKNOWN;
++}
++
++void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq)
++{
++	wq->abort = 0;
++	wake_up_interruptible(&wq->queue);
++}
++
++void DWC_WAITQ_ABORT(dwc_waitq_t *wq)
++{
++	wq->abort = 1;
++	wake_up_interruptible(&wq->queue);
++}
++
++
++/* Threading */
++
++dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data)
++{
++	struct task_struct *thread = kthread_run(func, data, name);
++
++	if (thread == ERR_PTR(-ENOMEM)) {
++		return NULL;
++	}
++
++	return (dwc_thread_t *)thread;
++}
++
++int DWC_THREAD_STOP(dwc_thread_t *thread)
++{
++	return kthread_stop((struct task_struct *)thread);
++}
++
++dwc_bool_t DWC_THREAD_SHOULD_STOP(void)
++{
++	return kthread_should_stop();
++}
++
++
++/* tasklets
++ - run in interrupt context (cannot sleep)
++ - each tasklet runs on a single CPU
++ - different tasklets can be running simultaneously on different CPUs
++ */
++struct dwc_tasklet {
++	struct tasklet_struct t;
++	dwc_tasklet_callback_t cb;
++	void *data;
++};
++
++static void tasklet_callback(unsigned long data)
++{
++	dwc_tasklet_t *t = (dwc_tasklet_t *)data;
++	t->cb(t->data);
++}
++
++dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data)
++{
++	dwc_tasklet_t *t = DWC_ALLOC(sizeof(*t));
++
++	if (t) {
++		t->cb = cb;
++		t->data = data;
++		tasklet_init(&t->t, tasklet_callback, (unsigned long)t);
++	} else {
++		DWC_ERROR("Cannot allocate memory for tasklet\n");
++	}
++
++	return t;
++}
++
++void DWC_TASK_FREE(dwc_tasklet_t *task)
++{
++	DWC_FREE(task);
++}
++
++void DWC_TASK_SCHEDULE(dwc_tasklet_t *task)
++{
++	tasklet_schedule(&task->t);
++}
++
++void DWC_TASK_HI_SCHEDULE(dwc_tasklet_t *task)
++{
++	tasklet_hi_schedule(&task->t);
++}
++
++
++/* workqueues
++ - run in process context (can sleep)
++ */
++typedef struct work_container {
++	dwc_work_callback_t cb;
++	void *data;
++	dwc_workq_t *wq;
++	char *name;
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_ENTRY(work_container) entry;
++#endif
++	struct delayed_work work;
++} work_container_t;
++
++#ifdef DEBUG
++DWC_CIRCLEQ_HEAD(work_container_queue, work_container);
++#endif
++
++struct dwc_workq {
++	struct workqueue_struct *wq;
++	dwc_spinlock_t *lock;
++	dwc_waitq_t *waitq;
++	int pending;
++
++#ifdef DEBUG
++	struct work_container_queue entries;
++#endif
++};
++
++static void do_work(struct work_struct *work)
++{
++	dwc_irqflags_t flags;
++	struct delayed_work *dw = container_of(work, struct delayed_work, work);
++	work_container_t *container = container_of(dw, struct work_container, work);
++	dwc_workq_t *wq = container->wq;
++
++	container->cb(container->data);
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_REMOVE(&wq->entries, container, entry);
++#endif
++	DWC_DEBUGC("Work done: %s, container=%p", container->name, container);
++	if (container->name) {
++		DWC_FREE(container->name);
++	}
++	DWC_FREE(container);
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++	wq->pending--;
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++	DWC_WAITQ_TRIGGER(wq->waitq);
++}
++
++static int work_done(void *data)
++{
++	dwc_workq_t *workq = (dwc_workq_t *)data;
++	return workq->pending == 0;
++}
++
++int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout)
++{
++	return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout);
++}
++
++dwc_workq_t *DWC_WORKQ_ALLOC(char *name)
++{
++	dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq));
++
++	if (!wq) {
++		return NULL;
++	}
++
++	wq->wq = create_singlethread_workqueue(name);
++	if (!wq->wq) {
++		goto no_wq;
++	}
++
++	wq->pending = 0;
++
++	wq->lock = DWC_SPINLOCK_ALLOC();
++	if (!wq->lock) {
++		goto no_lock;
++	}
++
++	wq->waitq = DWC_WAITQ_ALLOC();
++	if (!wq->waitq) {
++		goto no_waitq;
++	}
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_INIT(&wq->entries);
++#endif
++	return wq;
++
++ no_waitq:
++	DWC_SPINLOCK_FREE(wq->lock);
++ no_lock:
++	destroy_workqueue(wq->wq);
++ no_wq:
++	DWC_FREE(wq);
++
++	return NULL;
++}
++
++void DWC_WORKQ_FREE(dwc_workq_t *wq)
++{
++#ifdef DEBUG
++	if (wq->pending != 0) {
++		struct work_container *wc;
++		DWC_ERROR("Destroying work queue with pending work");
++		DWC_CIRCLEQ_FOREACH(wc, &wq->entries, entry) {
++			DWC_ERROR("Work %s still pending", wc->name);
++		}
++	}
++#endif
++	destroy_workqueue(wq->wq);
++	DWC_SPINLOCK_FREE(wq->lock);
++	DWC_WAITQ_FREE(wq->waitq);
++	DWC_FREE(wq);
++}
++
++void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t cb, void *data,
++			char *format, ...)
++{
++	dwc_irqflags_t flags;
++	work_container_t *container;
++	static char name[128];
++	va_list args;
++
++	va_start(args, format);
++	DWC_VSNPRINTF(name, 128, format, args);
++	va_end(args);
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++	wq->pending++;
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++	DWC_WAITQ_TRIGGER(wq->waitq);
++
++	container = DWC_ALLOC_ATOMIC(sizeof(*container));
++	if (!container) {
++		DWC_ERROR("Cannot allocate memory for container\n");
++		return;
++	}
++
++	container->name = DWC_STRDUP(name);
++	if (!container->name) {
++		DWC_ERROR("Cannot allocate memory for container->name\n");
++		DWC_FREE(container);
++		return;
++	}
++
++	container->cb = cb;
++	container->data = data;
++	container->wq = wq;
++	DWC_DEBUGC("Queueing work: %s, container=%p", container->name, container);
++	INIT_WORK(&container->work.work, do_work);
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry);
++#endif
++	queue_work(wq->wq, &container->work.work);
++}
++
++void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t cb,
++				void *data, uint32_t time, char *format, ...)
++{
++	dwc_irqflags_t flags;
++	work_container_t *container;
++	static char name[128];
++	va_list args;
++
++	va_start(args, format);
++	DWC_VSNPRINTF(name, 128, format, args);
++	va_end(args);
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++	wq->pending++;
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++	DWC_WAITQ_TRIGGER(wq->waitq);
++
++	container = DWC_ALLOC_ATOMIC(sizeof(*container));
++	if (!container) {
++		DWC_ERROR("Cannot allocate memory for container\n");
++		return;
++	}
++
++	container->name = DWC_STRDUP(name);
++	if (!container->name) {
++		DWC_ERROR("Cannot allocate memory for container->name\n");
++		DWC_FREE(container);
++		return;
++	}
++
++	container->cb = cb;
++	container->data = data;
++	container->wq = wq;
++	DWC_DEBUGC("Queueing work: %s, container=%p", container->name, container);
++	INIT_DELAYED_WORK(&container->work, do_work);
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry);
++#endif
++	queue_delayed_work(wq->wq, &container->work, msecs_to_jiffies(time));
++}
++
++int DWC_WORKQ_PENDING(dwc_workq_t *wq)
++{
++	return wq->pending;
++}
++
++
++#ifdef DWC_LIBMODULE
++
++#ifdef DWC_CCLIB
++/* CC */
++EXPORT_SYMBOL(dwc_cc_if_alloc);
++EXPORT_SYMBOL(dwc_cc_if_free);
++EXPORT_SYMBOL(dwc_cc_clear);
++EXPORT_SYMBOL(dwc_cc_add);
++EXPORT_SYMBOL(dwc_cc_remove);
++EXPORT_SYMBOL(dwc_cc_change);
++EXPORT_SYMBOL(dwc_cc_data_for_save);
++EXPORT_SYMBOL(dwc_cc_restore_from_data);
++EXPORT_SYMBOL(dwc_cc_match_chid);
++EXPORT_SYMBOL(dwc_cc_match_cdid);
++EXPORT_SYMBOL(dwc_cc_ck);
++EXPORT_SYMBOL(dwc_cc_chid);
++EXPORT_SYMBOL(dwc_cc_cdid);
++EXPORT_SYMBOL(dwc_cc_name);
++#endif	/* DWC_CCLIB */
++
++#ifdef DWC_CRYPTOLIB
++# ifndef CONFIG_MACH_IPMATE
++/* Modpow */
++EXPORT_SYMBOL(dwc_modpow);
++
++/* DH */
++EXPORT_SYMBOL(dwc_dh_modpow);
++EXPORT_SYMBOL(dwc_dh_derive_keys);
++EXPORT_SYMBOL(dwc_dh_pk);
++# endif	/* CONFIG_MACH_IPMATE */
++
++/* Crypto */
++EXPORT_SYMBOL(dwc_wusb_aes_encrypt);
++EXPORT_SYMBOL(dwc_wusb_cmf);
++EXPORT_SYMBOL(dwc_wusb_prf);
++EXPORT_SYMBOL(dwc_wusb_fill_ccm_nonce);
++EXPORT_SYMBOL(dwc_wusb_gen_nonce);
++EXPORT_SYMBOL(dwc_wusb_gen_key);
++EXPORT_SYMBOL(dwc_wusb_gen_mic);
++#endif	/* DWC_CRYPTOLIB */
++
++/* Notification */
++#ifdef DWC_NOTIFYLIB
++EXPORT_SYMBOL(dwc_alloc_notification_manager);
++EXPORT_SYMBOL(dwc_free_notification_manager);
++EXPORT_SYMBOL(dwc_register_notifier);
++EXPORT_SYMBOL(dwc_unregister_notifier);
++EXPORT_SYMBOL(dwc_add_observer);
++EXPORT_SYMBOL(dwc_remove_observer);
++EXPORT_SYMBOL(dwc_notify);
++#endif
++
++/* Memory Debugging Routines */
++#ifdef DWC_DEBUG_MEMORY
++EXPORT_SYMBOL(dwc_alloc_debug);
++EXPORT_SYMBOL(dwc_alloc_atomic_debug);
++EXPORT_SYMBOL(dwc_free_debug);
++EXPORT_SYMBOL(dwc_dma_alloc_debug);
++EXPORT_SYMBOL(dwc_dma_free_debug);
++#endif
++
++EXPORT_SYMBOL(DWC_MEMSET);
++EXPORT_SYMBOL(DWC_MEMCPY);
++EXPORT_SYMBOL(DWC_MEMMOVE);
++EXPORT_SYMBOL(DWC_MEMCMP);
++EXPORT_SYMBOL(DWC_STRNCMP);
++EXPORT_SYMBOL(DWC_STRCMP);
++EXPORT_SYMBOL(DWC_STRLEN);
++EXPORT_SYMBOL(DWC_STRCPY);
++EXPORT_SYMBOL(DWC_STRDUP);
++EXPORT_SYMBOL(DWC_ATOI);
++EXPORT_SYMBOL(DWC_ATOUI);
++
++#ifdef DWC_UTFLIB
++EXPORT_SYMBOL(DWC_UTF8_TO_UTF16LE);
++#endif	/* DWC_UTFLIB */
++
++EXPORT_SYMBOL(DWC_IN_IRQ);
++EXPORT_SYMBOL(DWC_IN_BH);
++EXPORT_SYMBOL(DWC_VPRINTF);
++EXPORT_SYMBOL(DWC_VSNPRINTF);
++EXPORT_SYMBOL(DWC_PRINTF);
++EXPORT_SYMBOL(DWC_SPRINTF);
++EXPORT_SYMBOL(DWC_SNPRINTF);
++EXPORT_SYMBOL(__DWC_WARN);
++EXPORT_SYMBOL(__DWC_ERROR);
++EXPORT_SYMBOL(DWC_EXCEPTION);
++
++#ifdef DEBUG
++EXPORT_SYMBOL(__DWC_DEBUG);
++#endif
++
++EXPORT_SYMBOL(__DWC_DMA_ALLOC);
++EXPORT_SYMBOL(__DWC_DMA_ALLOC_ATOMIC);
++EXPORT_SYMBOL(__DWC_DMA_FREE);
++EXPORT_SYMBOL(__DWC_ALLOC);
++EXPORT_SYMBOL(__DWC_ALLOC_ATOMIC);
++EXPORT_SYMBOL(__DWC_FREE);
++
++#ifdef DWC_CRYPTOLIB
++EXPORT_SYMBOL(DWC_RANDOM_BYTES);
++EXPORT_SYMBOL(DWC_AES_CBC);
++EXPORT_SYMBOL(DWC_SHA256);
++EXPORT_SYMBOL(DWC_HMAC_SHA256);
++#endif
++
++EXPORT_SYMBOL(DWC_CPU_TO_LE32);
++EXPORT_SYMBOL(DWC_CPU_TO_BE32);
++EXPORT_SYMBOL(DWC_LE32_TO_CPU);
++EXPORT_SYMBOL(DWC_BE32_TO_CPU);
++EXPORT_SYMBOL(DWC_CPU_TO_LE16);
++EXPORT_SYMBOL(DWC_CPU_TO_BE16);
++EXPORT_SYMBOL(DWC_LE16_TO_CPU);
++EXPORT_SYMBOL(DWC_BE16_TO_CPU);
++EXPORT_SYMBOL(DWC_READ_REG32);
++EXPORT_SYMBOL(DWC_WRITE_REG32);
++EXPORT_SYMBOL(DWC_MODIFY_REG32);
++
++#if 0
++EXPORT_SYMBOL(DWC_READ_REG64);
++EXPORT_SYMBOL(DWC_WRITE_REG64);
++EXPORT_SYMBOL(DWC_MODIFY_REG64);
++#endif
++
++EXPORT_SYMBOL(DWC_SPINLOCK_ALLOC);
++EXPORT_SYMBOL(DWC_SPINLOCK_FREE);
++EXPORT_SYMBOL(DWC_SPINLOCK);
++EXPORT_SYMBOL(DWC_SPINUNLOCK);
++EXPORT_SYMBOL(DWC_SPINLOCK_IRQSAVE);
++EXPORT_SYMBOL(DWC_SPINUNLOCK_IRQRESTORE);
++EXPORT_SYMBOL(DWC_MUTEX_ALLOC);
++
++#if (!defined(DWC_LINUX) || !defined(CONFIG_DEBUG_MUTEXES))
++EXPORT_SYMBOL(DWC_MUTEX_FREE);
++#endif
++
++EXPORT_SYMBOL(DWC_MUTEX_LOCK);
++EXPORT_SYMBOL(DWC_MUTEX_TRYLOCK);
++EXPORT_SYMBOL(DWC_MUTEX_UNLOCK);
++EXPORT_SYMBOL(DWC_UDELAY);
++EXPORT_SYMBOL(DWC_MDELAY);
++EXPORT_SYMBOL(DWC_MSLEEP);
++EXPORT_SYMBOL(DWC_TIME);
++EXPORT_SYMBOL(DWC_TIMER_ALLOC);
++EXPORT_SYMBOL(DWC_TIMER_FREE);
++EXPORT_SYMBOL(DWC_TIMER_SCHEDULE);
++EXPORT_SYMBOL(DWC_TIMER_CANCEL);
++EXPORT_SYMBOL(DWC_WAITQ_ALLOC);
++EXPORT_SYMBOL(DWC_WAITQ_FREE);
++EXPORT_SYMBOL(DWC_WAITQ_WAIT);
++EXPORT_SYMBOL(DWC_WAITQ_WAIT_TIMEOUT);
++EXPORT_SYMBOL(DWC_WAITQ_TRIGGER);
++EXPORT_SYMBOL(DWC_WAITQ_ABORT);
++EXPORT_SYMBOL(DWC_THREAD_RUN);
++EXPORT_SYMBOL(DWC_THREAD_STOP);
++EXPORT_SYMBOL(DWC_THREAD_SHOULD_STOP);
++EXPORT_SYMBOL(DWC_TASK_ALLOC);
++EXPORT_SYMBOL(DWC_TASK_FREE);
++EXPORT_SYMBOL(DWC_TASK_SCHEDULE);
++EXPORT_SYMBOL(DWC_WORKQ_WAIT_WORK_DONE);
++EXPORT_SYMBOL(DWC_WORKQ_ALLOC);
++EXPORT_SYMBOL(DWC_WORKQ_FREE);
++EXPORT_SYMBOL(DWC_WORKQ_SCHEDULE);
++EXPORT_SYMBOL(DWC_WORKQ_SCHEDULE_DELAYED);
++EXPORT_SYMBOL(DWC_WORKQ_PENDING);
++
++static int dwc_common_port_init_module(void)
++{
++	int result = 0;
++
++	printk(KERN_DEBUG "Module dwc_common_port init\n" );
++
++#ifdef DWC_DEBUG_MEMORY
++	result = dwc_memory_debug_start(NULL);
++	if (result) {
++		printk(KERN_ERR
++		       "dwc_memory_debug_start() failed with error %d\n",
++		       result);
++		return result;
++	}
++#endif
++
++#ifdef DWC_NOTIFYLIB
++	result = dwc_alloc_notification_manager(NULL, NULL);
++	if (result) {
++		printk(KERN_ERR
++		       "dwc_alloc_notification_manager() failed with error %d\n",
++		       result);
++		return result;
++	}
++#endif
++	return result;
++}
++
++static void dwc_common_port_exit_module(void)
++{
++	printk(KERN_DEBUG "Module dwc_common_port exit\n" );
++
++#ifdef DWC_NOTIFYLIB
++	dwc_free_notification_manager();
++#endif
++
++#ifdef DWC_DEBUG_MEMORY
++	dwc_memory_debug_stop();
++#endif
++}
++
++module_init(dwc_common_port_init_module);
++module_exit(dwc_common_port_exit_module);
++
++MODULE_DESCRIPTION("DWC Common Library - Portable version");
++MODULE_AUTHOR("Synopsys Inc.");
++MODULE_LICENSE ("GPL");
++
++#endif	/* DWC_LIBMODULE */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_common_nbsd.c linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_common_nbsd.c
+--- linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_common_nbsd.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_common_nbsd.c	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,1275 @@
++#include "dwc_os.h"
++#include "dwc_list.h"
++
++#ifdef DWC_CCLIB
++# include "dwc_cc.h"
++#endif
++
++#ifdef DWC_CRYPTOLIB
++# include "dwc_modpow.h"
++# include "dwc_dh.h"
++# include "dwc_crypto.h"
++#endif
++
++#ifdef DWC_NOTIFYLIB
++# include "dwc_notifier.h"
++#endif
++
++/* OS-Level Implementations */
++
++/* This is the NetBSD 4.0.1 kernel implementation of the DWC platform library. */
++
++
++/* MISC */
++
++void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size)
++{
++	return memset(dest, byte, size);
++}
++
++void *DWC_MEMCPY(void *dest, void const *src, uint32_t size)
++{
++	return memcpy(dest, src, size);
++}
++
++void *DWC_MEMMOVE(void *dest, void *src, uint32_t size)
++{
++	bcopy(src, dest, size);
++	return dest;
++}
++
++int DWC_MEMCMP(void *m1, void *m2, uint32_t size)
++{
++	return memcmp(m1, m2, size);
++}
++
++int DWC_STRNCMP(void *s1, void *s2, uint32_t size)
++{
++	return strncmp(s1, s2, size);
++}
++
++int DWC_STRCMP(void *s1, void *s2)
++{
++	return strcmp(s1, s2);
++}
++
++int DWC_STRLEN(char const *str)
++{
++	return strlen(str);
++}
++
++char *DWC_STRCPY(char *to, char const *from)
++{
++	return strcpy(to, from);
++}
++
++char *DWC_STRDUP(char const *str)
++{
++	int len = DWC_STRLEN(str) + 1;
++	char *new = DWC_ALLOC_ATOMIC(len);
++
++	if (!new) {
++		return NULL;
++	}
++
++	DWC_MEMCPY(new, str, len);
++	return new;
++}
++
++int DWC_ATOI(char *str, int32_t *value)
++{
++	char *end = NULL;
++
++	/* NetBSD doesn't have 'strtol' in the kernel, but 'strtoul'
++	 * should be equivalent on 2's complement machines
++	 */
++	*value = strtoul(str, &end, 0);
++	if (*end == '\0') {
++		return 0;
++	}
++
++	return -1;
++}
++
++int DWC_ATOUI(char *str, uint32_t *value)
++{
++	char *end = NULL;
++
++	*value = strtoul(str, &end, 0);
++	if (*end == '\0') {
++		return 0;
++	}
++
++	return -1;
++}
++
++
++#ifdef DWC_UTFLIB
++/* From usbstring.c */
++
++int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len)
++{
++	int	count = 0;
++	u8	c;
++	u16	uchar;
++
++	/* this insists on correct encodings, though not minimal ones.
++	 * BUT it currently rejects legit 4-byte UTF-8 code points,
++	 * which need surrogate pairs.  (Unicode 3.1 can use them.)
++	 */
++	while (len != 0 && (c = (u8) *s++) != 0) {
++		if (unlikely(c & 0x80)) {
++			// 2-byte sequence:
++			// 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
++			if ((c & 0xe0) == 0xc0) {
++				uchar = (c & 0x1f) << 6;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c;
++
++			// 3-byte sequence (most CJKV characters):
++			// zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
++			} else if ((c & 0xf0) == 0xe0) {
++				uchar = (c & 0x0f) << 12;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c << 6;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c;
++
++				/* no bogus surrogates */
++				if (0xd800 <= uchar && uchar <= 0xdfff)
++					goto fail;
++
++			// 4-byte sequence (surrogate pairs, currently rare):
++			// 11101110wwwwzzzzyy + 110111yyyyxxxxxx
++			//     = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
++			// (uuuuu = wwww + 1)
++			// FIXME accept the surrogate code points (only)
++			} else
++				goto fail;
++		} else
++			uchar = c;
++		put_unaligned (cpu_to_le16 (uchar), cp++);
++		count++;
++		len--;
++	}
++	return count;
++fail:
++	return -1;
++}
++
++#endif	/* DWC_UTFLIB */
++
++
++/* dwc_debug.h */
++
++dwc_bool_t DWC_IN_IRQ(void)
++{
++//	return in_irq();
++	return 0;
++}
++
++dwc_bool_t DWC_IN_BH(void)
++{
++//	return in_softirq();
++	return 0;
++}
++
++void DWC_VPRINTF(char *format, va_list args)
++{
++	vprintf(format, args);
++}
++
++int DWC_VSNPRINTF(char *str, int size, char *format, va_list args)
++{
++	return vsnprintf(str, size, format, args);
++}
++
++void DWC_PRINTF(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++
++int DWC_SPRINTF(char *buffer, char *format, ...)
++{
++	int retval;
++	va_list args;
++
++	va_start(args, format);
++	retval = vsprintf(buffer, format, args);
++	va_end(args);
++	return retval;
++}
++
++int DWC_SNPRINTF(char *buffer, int size, char *format, ...)
++{
++	int retval;
++	va_list args;
++
++	va_start(args, format);
++	retval = vsnprintf(buffer, size, format, args);
++	va_end(args);
++	return retval;
++}
++
++void __DWC_WARN(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++
++void __DWC_ERROR(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++
++void DWC_EXCEPTION(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++//	BUG_ON(1);	???
++}
++
++#ifdef DEBUG
++void __DWC_DEBUG(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++#endif
++
++
++/* dwc_mem.h */
++
++#if 0
++dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size,
++				uint32_t align,
++				uint32_t alloc)
++{
++	struct dma_pool *pool = dma_pool_create("Pool", NULL,
++						size, align, alloc);
++	return (dwc_pool_t *)pool;
++}
++
++void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool)
++{
++	dma_pool_destroy((struct dma_pool *)pool);
++}
++
++void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr)
++{
++//	return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr);
++	return dma_pool_alloc((struct dma_pool *)pool, M_WAITOK, dma_addr);
++}
++
++void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, uint64_t *dma_addr)
++{
++	void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr);
++	memset(..);
++}
++
++void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr)
++{
++	dma_pool_free(pool, vaddr, daddr);
++}
++#endif
++
++void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr)
++{
++	dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx;
++	int error;
++
++	error = bus_dmamem_alloc(dma->dma_tag, size, 1, size, dma->segs,
++				 sizeof(dma->segs) / sizeof(dma->segs[0]),
++				 &dma->nsegs, BUS_DMA_NOWAIT);
++	if (error) {
++		printf("%s: bus_dmamem_alloc(%ju) failed: %d\n", __func__,
++		       (uintmax_t)size, error);
++		goto fail_0;
++	}
++
++	error = bus_dmamem_map(dma->dma_tag, dma->segs, dma->nsegs, size,
++			       (caddr_t *)&dma->dma_vaddr,
++			       BUS_DMA_NOWAIT | BUS_DMA_COHERENT);
++	if (error) {
++		printf("%s: bus_dmamem_map failed: %d\n", __func__, error);
++		goto fail_1;
++	}
++
++	error = bus_dmamap_create(dma->dma_tag, size, 1, size, 0,
++				  BUS_DMA_NOWAIT, &dma->dma_map);
++	if (error) {
++		printf("%s: bus_dmamap_create failed: %d\n", __func__, error);
++		goto fail_2;
++	}
++
++	error = bus_dmamap_load(dma->dma_tag, dma->dma_map, dma->dma_vaddr,
++				size, NULL, BUS_DMA_NOWAIT);
++	if (error) {
++		printf("%s: bus_dmamap_load failed: %d\n", __func__, error);
++		goto fail_3;
++	}
++
++	dma->dma_paddr = (bus_addr_t)dma->segs[0].ds_addr;
++	*dma_addr = dma->dma_paddr;
++	return dma->dma_vaddr;
++
++fail_3:
++	bus_dmamap_destroy(dma->dma_tag, dma->dma_map);
++fail_2:
++	bus_dmamem_unmap(dma->dma_tag, dma->dma_vaddr, size);
++fail_1:
++	bus_dmamem_free(dma->dma_tag, dma->segs, dma->nsegs);
++fail_0:
++	dma->dma_map = NULL;
++	dma->dma_vaddr = NULL;
++	dma->nsegs = 0;
++
++	return NULL;
++}
++
++void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr)
++{
++	dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx;
++
++	if (dma->dma_map != NULL) {
++		bus_dmamap_sync(dma->dma_tag, dma->dma_map, 0, size,
++				BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
++		bus_dmamap_unload(dma->dma_tag, dma->dma_map);
++		bus_dmamap_destroy(dma->dma_tag, dma->dma_map);
++		bus_dmamem_unmap(dma->dma_tag, dma->dma_vaddr, size);
++		bus_dmamem_free(dma->dma_tag, dma->segs, dma->nsegs);
++		dma->dma_paddr = 0;
++		dma->dma_map = NULL;
++		dma->dma_vaddr = NULL;
++		dma->nsegs = 0;
++	}
++}
++
++void *__DWC_ALLOC(void *mem_ctx, uint32_t size)
++{
++	return malloc(size, M_DEVBUF, M_WAITOK | M_ZERO);
++}
++
++void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size)
++{
++	return malloc(size, M_DEVBUF, M_NOWAIT | M_ZERO);
++}
++
++void __DWC_FREE(void *mem_ctx, void *addr)
++{
++	free(addr, M_DEVBUF);
++}
++
++
++#ifdef DWC_CRYPTOLIB
++/* dwc_crypto.h */
++
++void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length)
++{
++	get_random_bytes(buffer, length);
++}
++
++int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out)
++{
++	struct crypto_blkcipher *tfm;
++	struct blkcipher_desc desc;
++	struct scatterlist sgd;
++	struct scatterlist sgs;
++
++	tfm = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC);
++	if (tfm == NULL) {
++		printk("failed to load transform for aes CBC\n");
++		return -1;
++	}
++
++	crypto_blkcipher_setkey(tfm, key, keylen);
++	crypto_blkcipher_set_iv(tfm, iv, 16);
++
++	sg_init_one(&sgd, out, messagelen);
++	sg_init_one(&sgs, message, messagelen);
++
++	desc.tfm = tfm;
++	desc.flags = 0;
++
++	if (crypto_blkcipher_encrypt(&desc, &sgd, &sgs, messagelen)) {
++		crypto_free_blkcipher(tfm);
++		DWC_ERROR("AES CBC encryption failed");
++		return -1;
++	}
++
++	crypto_free_blkcipher(tfm);
++	return 0;
++}
++
++int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out)
++{
++	struct crypto_hash *tfm;
++	struct hash_desc desc;
++	struct scatterlist sg;
++
++	tfm = crypto_alloc_hash("sha256", 0, CRYPTO_ALG_ASYNC);
++	if (IS_ERR(tfm)) {
++		DWC_ERROR("Failed to load transform for sha256: %ld", PTR_ERR(tfm));
++		return 0;
++	}
++	desc.tfm = tfm;
++	desc.flags = 0;
++
++	sg_init_one(&sg, message, len);
++	crypto_hash_digest(&desc, &sg, len, out);
++	crypto_free_hash(tfm);
++
++	return 1;
++}
++
++int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen,
++		    uint8_t *key, uint32_t keylen, uint8_t *out)
++{
++	struct crypto_hash *tfm;
++	struct hash_desc desc;
++	struct scatterlist sg;
++
++	tfm = crypto_alloc_hash("hmac(sha256)", 0, CRYPTO_ALG_ASYNC);
++	if (IS_ERR(tfm)) {
++		DWC_ERROR("Failed to load transform for hmac(sha256): %ld", PTR_ERR(tfm));
++		return 0;
++	}
++	desc.tfm = tfm;
++	desc.flags = 0;
++
++	sg_init_one(&sg, message, messagelen);
++	crypto_hash_setkey(tfm, key, keylen);
++	crypto_hash_digest(&desc, &sg, messagelen, out);
++	crypto_free_hash(tfm);
++
++	return 1;
++}
++
++#endif	/* DWC_CRYPTOLIB */
++
++
++/* Byte Ordering Conversions */
++
++uint32_t DWC_CPU_TO_LE32(uint32_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint32_t DWC_CPU_TO_BE32(uint32_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint32_t DWC_LE32_TO_CPU(uint32_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint32_t DWC_BE32_TO_CPU(uint32_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint16_t DWC_CPU_TO_LE16(uint16_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++uint16_t DWC_CPU_TO_BE16(uint16_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++uint16_t DWC_LE16_TO_CPU(uint16_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++uint16_t DWC_BE16_TO_CPU(uint16_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++
++/* Registers */
++
++uint32_t DWC_READ_REG32(void *io_ctx, uint32_t volatile *reg)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	return bus_space_read_4(io->iot, io->ioh, ior);
++}
++
++#if 0
++uint64_t DWC_READ_REG64(void *io_ctx, uint64_t volatile *reg)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	return bus_space_read_8(io->iot, io->ioh, ior);
++}
++#endif
++
++void DWC_WRITE_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t value)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	bus_space_write_4(io->iot, io->ioh, ior, value);
++}
++
++#if 0
++void DWC_WRITE_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t value)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	bus_space_write_8(io->iot, io->ioh, ior, value);
++}
++#endif
++
++void DWC_MODIFY_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t clear_mask,
++		      uint32_t set_mask)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	bus_space_write_4(io->iot, io->ioh, ior,
++			  (bus_space_read_4(io->iot, io->ioh, ior) &
++			   ~clear_mask) | set_mask);
++}
++
++#if 0
++void DWC_MODIFY_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t clear_mask,
++		      uint64_t set_mask)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	bus_space_write_8(io->iot, io->ioh, ior,
++			  (bus_space_read_8(io->iot, io->ioh, ior) &
++			   ~clear_mask) | set_mask);
++}
++#endif
++
++
++/* Locking */
++
++dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void)
++{
++	struct simplelock *sl = DWC_ALLOC(sizeof(*sl));
++
++	if (!sl) {
++		DWC_ERROR("Cannot allocate memory for spinlock");
++		return NULL;
++	}
++
++	simple_lock_init(sl);
++	return (dwc_spinlock_t *)sl;
++}
++
++void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock)
++{
++	struct simplelock *sl = (struct simplelock *)lock;
++
++	DWC_FREE(sl);
++}
++
++void DWC_SPINLOCK(dwc_spinlock_t *lock)
++{
++	simple_lock((struct simplelock *)lock);
++}
++
++void DWC_SPINUNLOCK(dwc_spinlock_t *lock)
++{
++	simple_unlock((struct simplelock *)lock);
++}
++
++void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags)
++{
++	simple_lock((struct simplelock *)lock);
++	*flags = splbio();
++}
++
++void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags)
++{
++	splx(flags);
++	simple_unlock((struct simplelock *)lock);
++}
++
++dwc_mutex_t *DWC_MUTEX_ALLOC(void)
++{
++	dwc_mutex_t *mutex = DWC_ALLOC(sizeof(struct lock));
++
++	if (!mutex) {
++		DWC_ERROR("Cannot allocate memory for mutex");
++		return NULL;
++	}
++
++	lockinit((struct lock *)mutex, 0, "dw3mtx", 0, 0);
++	return mutex;
++}
++
++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES))
++#else
++void DWC_MUTEX_FREE(dwc_mutex_t *mutex)
++{
++	DWC_FREE(mutex);
++}
++#endif
++
++void DWC_MUTEX_LOCK(dwc_mutex_t *mutex)
++{
++	lockmgr((struct lock *)mutex, LK_EXCLUSIVE, NULL);
++}
++
++int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex)
++{
++	int status;
++
++	status = lockmgr((struct lock *)mutex, LK_EXCLUSIVE | LK_NOWAIT, NULL);
++	return status == 0;
++}
++
++void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex)
++{
++	lockmgr((struct lock *)mutex, LK_RELEASE, NULL);
++}
++
++
++/* Timing */
++
++void DWC_UDELAY(uint32_t usecs)
++{
++	DELAY(usecs);
++}
++
++void DWC_MDELAY(uint32_t msecs)
++{
++	do {
++		DELAY(1000);
++	} while (--msecs);
++}
++
++void DWC_MSLEEP(uint32_t msecs)
++{
++	struct timeval tv;
++
++	tv.tv_sec = msecs / 1000;
++	tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000;
++	tsleep(&tv, 0, "dw3slp", tvtohz(&tv));
++}
++
++uint32_t DWC_TIME(void)
++{
++	struct timeval tv;
++
++	microuptime(&tv);	// or getmicrouptime? (less precise, but faster)
++	return tv.tv_sec * 1000 + tv.tv_usec / 1000;
++}
++
++
++/* Timers */
++
++struct dwc_timer {
++	struct callout t;
++	char *name;
++	dwc_spinlock_t *lock;
++	dwc_timer_callback_t cb;
++	void *data;
++};
++
++dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data)
++{
++	dwc_timer_t *t = DWC_ALLOC(sizeof(*t));
++
++	if (!t) {
++		DWC_ERROR("Cannot allocate memory for timer");
++		return NULL;
++	}
++
++	callout_init(&t->t);
++
++	t->name = DWC_STRDUP(name);
++	if (!t->name) {
++		DWC_ERROR("Cannot allocate memory for timer->name");
++		goto no_name;
++	}
++
++	t->lock = DWC_SPINLOCK_ALLOC();
++	if (!t->lock) {
++		DWC_ERROR("Cannot allocate memory for timer->lock");
++		goto no_lock;
++	}
++
++	t->cb = cb;
++	t->data = data;
++
++	return t;
++
++ no_lock:
++	DWC_FREE(t->name);
++ no_name:
++	DWC_FREE(t);
++
++	return NULL;
++}
++
++void DWC_TIMER_FREE(dwc_timer_t *timer)
++{
++	callout_stop(&timer->t);
++	DWC_SPINLOCK_FREE(timer->lock);
++	DWC_FREE(timer->name);
++	DWC_FREE(timer);
++}
++
++void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time)
++{
++	struct timeval tv;
++
++	tv.tv_sec = time / 1000;
++	tv.tv_usec = (time - tv.tv_sec * 1000) * 1000;
++	callout_reset(&timer->t, tvtohz(&tv), timer->cb, timer->data);
++}
++
++void DWC_TIMER_CANCEL(dwc_timer_t *timer)
++{
++	callout_stop(&timer->t);
++}
++
++
++/* Wait Queues */
++
++struct dwc_waitq {
++	struct simplelock lock;
++	int abort;
++};
++
++dwc_waitq_t *DWC_WAITQ_ALLOC(void)
++{
++	dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq));
++
++	if (!wq) {
++		DWC_ERROR("Cannot allocate memory for waitqueue");
++		return NULL;
++	}
++
++	simple_lock_init(&wq->lock);
++	wq->abort = 0;
++
++	return wq;
++}
++
++void DWC_WAITQ_FREE(dwc_waitq_t *wq)
++{
++	DWC_FREE(wq);
++}
++
++int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data)
++{
++	int ipl;
++	int result = 0;
++
++	simple_lock(&wq->lock);
++	ipl = splbio();
++
++	/* Skip the sleep if already aborted or triggered */
++	if (!wq->abort && !cond(data)) {
++		splx(ipl);
++		result = ltsleep(wq, PCATCH, "dw3wat", 0, &wq->lock); // infinite timeout
++		ipl = splbio();
++	}
++
++	if (result == 0) {			// awoken
++		if (wq->abort) {
++			wq->abort = 0;
++			result = -DWC_E_ABORT;
++		} else {
++			result = 0;
++		}
++
++		splx(ipl);
++		simple_unlock(&wq->lock);
++	} else {
++		wq->abort = 0;
++		splx(ipl);
++		simple_unlock(&wq->lock);
++
++		if (result == ERESTART) {	// signaled - restart
++			result = -DWC_E_RESTART;
++		} else {			// signaled - must be EINTR
++			result = -DWC_E_ABORT;
++		}
++	}
++
++	return result;
++}
++
++int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond,
++			       void *data, int32_t msecs)
++{
++	struct timeval tv, tv1, tv2;
++	int ipl;
++	int result = 0;
++
++	tv.tv_sec = msecs / 1000;
++	tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000;
++
++	simple_lock(&wq->lock);
++	ipl = splbio();
++
++	/* Skip the sleep if already aborted or triggered */
++	if (!wq->abort && !cond(data)) {
++		splx(ipl);
++		getmicrouptime(&tv1);
++		result = ltsleep(wq, PCATCH, "dw3wto", tvtohz(&tv), &wq->lock);
++		getmicrouptime(&tv2);
++		ipl = splbio();
++	}
++
++	if (result == 0) {			// awoken
++		if (wq->abort) {
++			wq->abort = 0;
++			splx(ipl);
++			simple_unlock(&wq->lock);
++			result = -DWC_E_ABORT;
++		} else {
++			splx(ipl);
++			simple_unlock(&wq->lock);
++
++			tv2.tv_usec -= tv1.tv_usec;
++			if (tv2.tv_usec < 0) {
++				tv2.tv_usec += 1000000;
++				tv2.tv_sec--;
++			}
++
++			tv2.tv_sec -= tv1.tv_sec;
++			result = tv2.tv_sec * 1000 + tv2.tv_usec / 1000;
++			result = msecs - result;
++			if (result <= 0)
++				result = 1;
++		}
++	} else {
++		wq->abort = 0;
++		splx(ipl);
++		simple_unlock(&wq->lock);
++
++		if (result == ERESTART) {	// signaled - restart
++			result = -DWC_E_RESTART;
++
++		} else if (result == EINTR) {		// signaled - interrupt
++			result = -DWC_E_ABORT;
++
++		} else {				// timed out
++			result = -DWC_E_TIMEOUT;
++		}
++	}
++
++	return result;
++}
++
++void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq)
++{
++	wakeup(wq);
++}
++
++void DWC_WAITQ_ABORT(dwc_waitq_t *wq)
++{
++	int ipl;
++
++	simple_lock(&wq->lock);
++	ipl = splbio();
++	wq->abort = 1;
++	wakeup(wq);
++	splx(ipl);
++	simple_unlock(&wq->lock);
++}
++
++
++/* Threading */
++
++struct dwc_thread {
++	struct proc *proc;
++	int abort;
++};
++
++dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data)
++{
++	int retval;
++	dwc_thread_t *thread = DWC_ALLOC(sizeof(*thread));
++
++	if (!thread) {
++		return NULL;
++	}
++
++	thread->abort = 0;
++	retval = kthread_create1((void (*)(void *))func, data, &thread->proc,
++				 "%s", name);
++	if (retval) {
++		DWC_FREE(thread);
++		return NULL;
++	}
++
++	return thread;
++}
++
++int DWC_THREAD_STOP(dwc_thread_t *thread)
++{
++	int retval;
++
++	thread->abort = 1;
++	retval = tsleep(&thread->abort, 0, "dw3stp", 60 * hz);
++
++	if (retval == 0) {
++		/* DWC_THREAD_EXIT() will free the thread struct */
++		return 0;
++	}
++
++	/* NOTE: We leak the thread struct if thread doesn't die */
++
++	if (retval == EWOULDBLOCK) {
++		return -DWC_E_TIMEOUT;
++	}
++
++	return -DWC_E_UNKNOWN;
++}
++
++dwc_bool_t DWC_THREAD_SHOULD_STOP(dwc_thread_t *thread)
++{
++	return thread->abort;
++}
++
++void DWC_THREAD_EXIT(dwc_thread_t *thread)
++{
++	wakeup(&thread->abort);
++	DWC_FREE(thread);
++	kthread_exit(0);
++}
++
++/* tasklets
++ - Runs in interrupt context (cannot sleep)
++ - Each tasklet runs on a single CPU
++ - Different tasklets can be running simultaneously on different CPUs
++ [ On NetBSD there is no corresponding mechanism, drivers don't have bottom-
++   halves. So we just call the callback directly from DWC_TASK_SCHEDULE() ]
++ */
++struct dwc_tasklet {
++	dwc_tasklet_callback_t cb;
++	void *data;
++};
++
++static void tasklet_callback(void *data)
++{
++	dwc_tasklet_t *task = (dwc_tasklet_t *)data;
++
++	task->cb(task->data);
++}
++
++dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data)
++{
++	dwc_tasklet_t *task = DWC_ALLOC(sizeof(*task));
++
++	if (task) {
++		task->cb = cb;
++		task->data = data;
++	} else {
++		DWC_ERROR("Cannot allocate memory for tasklet");
++	}
++
++	return task;
++}
++
++void DWC_TASK_FREE(dwc_tasklet_t *task)
++{
++	DWC_FREE(task);
++}
++
++void DWC_TASK_SCHEDULE(dwc_tasklet_t *task)
++{
++	tasklet_callback(task);
++}
++
++
++/* workqueues
++ - Runs in process context (can sleep)
++ */
++typedef struct work_container {
++	dwc_work_callback_t cb;
++	void *data;
++	dwc_workq_t *wq;
++	char *name;
++	int hz;
++	struct work task;
++} work_container_t;
++
++struct dwc_workq {
++	struct workqueue *taskq;
++	dwc_spinlock_t *lock;
++	dwc_waitq_t *waitq;
++	int pending;
++	struct work_container *container;
++};
++
++static void do_work(struct work *task, void *data)
++{
++	dwc_workq_t *wq = (dwc_workq_t *)data;
++	work_container_t *container = wq->container;
++	dwc_irqflags_t flags;
++
++	if (container->hz) {
++		tsleep(container, 0, "dw3wrk", container->hz);
++	}
++
++	container->cb(container->data);
++	DWC_DEBUG("Work done: %s, container=%p", container->name, container);
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++	if (container->name)
++		DWC_FREE(container->name);
++	DWC_FREE(container);
++	wq->pending--;
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++	DWC_WAITQ_TRIGGER(wq->waitq);
++}
++
++static int work_done(void *data)
++{
++	dwc_workq_t *workq = (dwc_workq_t *)data;
++
++	return workq->pending == 0;
++}
++
++int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout)
++{
++	return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout);
++}
++
++dwc_workq_t *DWC_WORKQ_ALLOC(char *name)
++{
++	int result;
++	dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq));
++
++	if (!wq) {
++		DWC_ERROR("Cannot allocate memory for workqueue");
++		return NULL;
++	}
++
++	result = workqueue_create(&wq->taskq, name, do_work, wq, 0 /*PWAIT*/,
++				  IPL_BIO, 0);
++	if (result) {
++		DWC_ERROR("Cannot create workqueue");
++		goto no_taskq;
++	}
++
++	wq->pending = 0;
++
++	wq->lock = DWC_SPINLOCK_ALLOC();
++	if (!wq->lock) {
++		DWC_ERROR("Cannot allocate memory for spinlock");
++		goto no_lock;
++	}
++
++	wq->waitq = DWC_WAITQ_ALLOC();
++	if (!wq->waitq) {
++		DWC_ERROR("Cannot allocate memory for waitqueue");
++		goto no_waitq;
++	}
++
++	return wq;
++
++ no_waitq:
++	DWC_SPINLOCK_FREE(wq->lock);
++ no_lock:
++	workqueue_destroy(wq->taskq);
++ no_taskq:
++	DWC_FREE(wq);
++
++	return NULL;
++}
++
++void DWC_WORKQ_FREE(dwc_workq_t *wq)
++{
++#ifdef DEBUG
++	dwc_irqflags_t flags;
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++
++	if (wq->pending != 0) {
++		struct work_container *container = wq->container;
++
++		DWC_ERROR("Destroying work queue with pending work");
++
++		if (container && container->name) {
++			DWC_ERROR("Work %s still pending", container->name);
++		}
++	}
++
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++#endif
++	DWC_WAITQ_FREE(wq->waitq);
++	DWC_SPINLOCK_FREE(wq->lock);
++	workqueue_destroy(wq->taskq);
++	DWC_FREE(wq);
++}
++
++void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t cb, void *data,
++			char *format, ...)
++{
++	dwc_irqflags_t flags;
++	work_container_t *container;
++	static char name[128];
++	va_list args;
++
++	va_start(args, format);
++	DWC_VSNPRINTF(name, 128, format, args);
++	va_end(args);
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++	wq->pending++;
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++	DWC_WAITQ_TRIGGER(wq->waitq);
++
++	container = DWC_ALLOC_ATOMIC(sizeof(*container));
++	if (!container) {
++		DWC_ERROR("Cannot allocate memory for container");
++		return;
++	}
++
++	container->name = DWC_STRDUP(name);
++	if (!container->name) {
++		DWC_ERROR("Cannot allocate memory for container->name");
++		DWC_FREE(container);
++		return;
++	}
++
++	container->cb = cb;
++	container->data = data;
++	container->wq = wq;
++	container->hz = 0;
++	wq->container = container;
++
++	DWC_DEBUG("Queueing work: %s, container=%p", container->name, container);
++	workqueue_enqueue(wq->taskq, &container->task);
++}
++
++void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t cb,
++				void *data, uint32_t time, char *format, ...)
++{
++	dwc_irqflags_t flags;
++	work_container_t *container;
++	static char name[128];
++	struct timeval tv;
++	va_list args;
++
++	va_start(args, format);
++	DWC_VSNPRINTF(name, 128, format, args);
++	va_end(args);
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++	wq->pending++;
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++	DWC_WAITQ_TRIGGER(wq->waitq);
++
++	container = DWC_ALLOC_ATOMIC(sizeof(*container));
++	if (!container) {
++		DWC_ERROR("Cannot allocate memory for container");
++		return;
++	}
++
++	container->name = DWC_STRDUP(name);
++	if (!container->name) {
++		DWC_ERROR("Cannot allocate memory for container->name");
++		DWC_FREE(container);
++		return;
++	}
++
++	container->cb = cb;
++	container->data = data;
++	container->wq = wq;
++	tv.tv_sec = time / 1000;
++	tv.tv_usec = (time - tv.tv_sec * 1000) * 1000;
++	container->hz = tvtohz(&tv);
++	wq->container = container;
++
++	DWC_DEBUG("Queueing work: %s, container=%p", container->name, container);
++	workqueue_enqueue(wq->taskq, &container->task);
++}
++
++int DWC_WORKQ_PENDING(dwc_workq_t *wq)
++{
++	return wq->pending;
++}
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_crypto.c linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_crypto.c
+--- linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_crypto.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_crypto.c	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,308 @@
++/* =========================================================================
++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_crypto.c $
++ * $Revision: #5 $
++ * $Date: 2010/09/28 $
++ * $Change: 1596182 $
++ *
++ * Synopsys Portability Library Software and documentation
++ * (hereinafter, "Software") is an Unsupported proprietary work of
++ * Synopsys, Inc. unless otherwise expressly agreed to in writing
++ * between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product
++ * under any End User Software License Agreement or Agreement for
++ * Licensed Product with Synopsys or any supplement thereto. You are
++ * permitted to use and redistribute this Software in source and binary
++ * forms, with or without modification, provided that redistributions
++ * of source code must retain this notice. You may not view, use,
++ * disclose, copy or distribute this file or any information contained
++ * herein except pursuant to this license grant from Synopsys. If you
++ * do not agree with this notice, including the disclaimer below, then
++ * you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================= */
++
++/** @file
++ * This file contains the WUSB cryptographic routines.
++ */
++
++#ifdef DWC_CRYPTOLIB
++
++#include "dwc_crypto.h"
++#include "usb.h"
++
++#ifdef DEBUG
++static inline void dump_bytes(char *name, uint8_t *bytes, int len)
++{
++	int i;
++	DWC_PRINTF("%s: ", name);
++	for (i=0; i<len; i++) {
++		DWC_PRINTF("%02x ", bytes[i]);
++	}
++	DWC_PRINTF("\n");
++}
++#else
++#define dump_bytes(x...)
++#endif
++
++/* Display a block */
++void show_block(const u8 *blk, const char *prefix, const char *suffix, int a)
++{
++#ifdef DWC_DEBUG_CRYPTO
++	int i, blksize = 16;
++
++	DWC_DEBUG("%s", prefix);
++
++	if (suffix == NULL) {
++		suffix = "\n";
++		blksize = a;
++	}
++
++	for (i = 0; i < blksize; i++)
++		DWC_PRINT("%02x%s", *blk++, ((i & 3) == 3) ? "  " : " ");
++	DWC_PRINT(suffix);
++#endif
++}
++
++/**
++ * Encrypts an array of bytes using the AES encryption engine.
++ * If <code>dst</code> == <code>src</code>, then the bytes will be encrypted
++ * in-place.
++ *
++ * @return  0 on success, negative error code on error.
++ */
++int dwc_wusb_aes_encrypt(u8 *src, u8 *key, u8 *dst)
++{
++	u8 block_t[16];
++	DWC_MEMSET(block_t, 0, 16);
++
++	return DWC_AES_CBC(src, 16, key, 16, block_t, dst);
++}
++
++/**
++ * The CCM-MAC-FUNCTION described in section 6.5 of the WUSB spec.
++ * This function takes a data string and returns the encrypted CBC
++ * Counter-mode MIC.
++ *
++ * @param key     The 128-bit symmetric key.
++ * @param nonce   The CCM nonce.
++ * @param label   The unique 14-byte ASCII text label.
++ * @param bytes   The byte array to be encrypted.
++ * @param len     Length of the byte array.
++ * @param result  Byte array to receive the 8-byte encrypted MIC.
++ */
++void dwc_wusb_cmf(u8 *key, u8 *nonce,
++		  char *label, u8 *bytes, int len, u8 *result)
++{
++	u8 block_m[16];
++	u8 block_x[16];
++	u8 block_t[8];
++	int idx, blkNum;
++	u16 la = (u16)(len + 14);
++
++	/* Set the AES-128 key */
++	//dwc_aes_setkey(tfm, key, 16);
++
++	/* Fill block B0 from flags = 0x59, N, and l(m) = 0 */
++	block_m[0] = 0x59;
++	for (idx = 0; idx < 13; idx++)
++		block_m[idx + 1] = nonce[idx];
++	block_m[14] = 0;
++	block_m[15] = 0;
++
++	/* Produce the CBC IV */
++	dwc_wusb_aes_encrypt(block_m, key, block_x);
++	show_block(block_m, "CBC IV in: ", "\n", 0);
++	show_block(block_x, "CBC IV out:", "\n", 0);
++
++	/* Fill block B1 from l(a) = Blen + 14, and A */
++	block_x[0] ^= (u8)(la >> 8);
++	block_x[1] ^= (u8)la;
++	for (idx = 0; idx < 14; idx++)
++		block_x[idx + 2] ^= label[idx];
++	show_block(block_x, "After xor: ", "b1\n", 16);
++
++	dwc_wusb_aes_encrypt(block_x, key, block_x);
++	show_block(block_x, "After AES: ", "b1\n", 16);
++
++	idx = 0;
++	blkNum = 0;
++
++	/* Fill remaining blocks with B */
++	while (len-- > 0) {
++		block_x[idx] ^= *bytes++;
++		if (++idx >= 16) {
++			idx = 0;
++			show_block(block_x, "After xor: ", "\n", blkNum);
++			dwc_wusb_aes_encrypt(block_x, key, block_x);
++			show_block(block_x, "After AES: ", "\n", blkNum);
++			blkNum++;
++		}
++	}
++
++	/* Handle partial last block */
++	if (idx > 0) {
++		show_block(block_x, "After xor: ", "\n", blkNum);
++		dwc_wusb_aes_encrypt(block_x, key, block_x);
++		show_block(block_x, "After AES: ", "\n", blkNum);
++	}
++
++	/* Save the MIC tag */
++	DWC_MEMCPY(block_t, block_x, 8);
++	show_block(block_t, "MIC tag  : ", NULL, 8);
++
++	/* Fill block A0 from flags = 0x01, N, and counter = 0 */
++	block_m[0] = 0x01;
++	block_m[14] = 0;
++	block_m[15] = 0;
++
++	/* Encrypt the counter */
++	dwc_wusb_aes_encrypt(block_m, key, block_x);
++	show_block(block_x, "CTR[MIC] : ", NULL, 8);
++
++	/* XOR with MIC tag */
++	for (idx = 0; idx < 8; idx++) {
++		block_t[idx] ^= block_x[idx];
++	}
++
++	/* Return result to caller */
++	DWC_MEMCPY(result, block_t, 8);
++	show_block(result, "CCM-MIC  : ", NULL, 8);
++
++}
++
++/**
++ * The PRF function described in section 6.5 of the WUSB spec. This function
++ * concatenates MIC values returned from dwc_cmf() to create a value of
++ * the requested length.
++ *
++ * @param prf_len  Length of the PRF function in bits (64, 128, or 256).
++ * @param key, nonce, label, bytes, len  Same as for dwc_cmf().
++ * @param result   Byte array to receive the result.
++ */
++void dwc_wusb_prf(int prf_len, u8 *key,
++		  u8 *nonce, char *label, u8 *bytes, int len, u8 *result)
++{
++	int i;
++
++	nonce[0] = 0;
++	for (i = 0; i < prf_len >> 6; i++, nonce[0]++) {
++		dwc_wusb_cmf(key, nonce, label, bytes, len, result);
++		result += 8;
++	}
++}
++
++/**
++ * Fills in CCM Nonce per the WUSB spec.
++ *
++ * @param[in] haddr Host address.
++ * @param[in] daddr Device address.
++ * @param[in] tkid Session Key(PTK) identifier.
++ * @param[out] nonce Pointer to where the CCM Nonce output is to be written.
++ */
++void dwc_wusb_fill_ccm_nonce(uint16_t haddr, uint16_t daddr, uint8_t *tkid,
++			     uint8_t *nonce)
++{
++
++	DWC_DEBUG("%s %x %x\n", __func__, daddr, haddr);
++
++	DWC_MEMSET(&nonce[0], 0, 16);
++
++	DWC_MEMCPY(&nonce[6], tkid, 3);
++	nonce[9] = daddr & 0xFF;
++	nonce[10] = (daddr >> 8) & 0xFF;
++	nonce[11] = haddr & 0xFF;
++	nonce[12] = (haddr >> 8) & 0xFF;
++
++	dump_bytes("CCM nonce", nonce, 16);
++}
++
++/**
++ * Generates a 16-byte cryptographic-grade random number for the Host/Device
++ * Nonce.
++ */
++void dwc_wusb_gen_nonce(uint16_t addr, uint8_t *nonce)
++{
++	uint8_t inonce[16];
++	uint32_t temp[4];
++
++	/* Fill in the Nonce */
++	DWC_MEMSET(&inonce[0], 0, sizeof(inonce));
++	inonce[9] = addr & 0xFF;
++	inonce[10] = (addr >> 8) & 0xFF;
++	inonce[11] = inonce[9];
++	inonce[12] = inonce[10];
++
++	/* Collect "randomness samples" */
++	DWC_RANDOM_BYTES((uint8_t *)temp, 16);
++
++	dwc_wusb_prf_128((uint8_t *)temp, nonce,
++			 "Random Numbers", (uint8_t *)temp, sizeof(temp),
++			 nonce);
++}
++
++/**
++ * Generates the Session Key (PTK) and Key Confirmation Key (KCK) per the
++ * WUSB spec.
++ *
++ * @param[in] ccm_nonce Pointer to CCM Nonce.
++ * @param[in] mk Master Key to derive the session from
++ * @param[in] hnonce Pointer to Host Nonce.
++ * @param[in] dnonce Pointer to Device Nonce.
++ * @param[out] kck Pointer to where the KCK output is to be written.
++ * @param[out] ptk Pointer to where the PTK output is to be written.
++ */
++void dwc_wusb_gen_key(uint8_t *ccm_nonce, uint8_t *mk, uint8_t *hnonce,
++		      uint8_t *dnonce, uint8_t *kck, uint8_t *ptk)
++{
++	uint8_t idata[32];
++	uint8_t odata[32];
++
++	dump_bytes("ck", mk, 16);
++	dump_bytes("hnonce", hnonce, 16);
++	dump_bytes("dnonce", dnonce, 16);
++
++	/* The data is the HNonce and DNonce concatenated */
++	DWC_MEMCPY(&idata[0], hnonce, 16);
++	DWC_MEMCPY(&idata[16], dnonce, 16);
++
++	dwc_wusb_prf_256(mk, ccm_nonce, "Pair-wise keys", idata, 32, odata);
++
++	/* Low 16 bytes of the result is the KCK, high 16 is the PTK */
++	DWC_MEMCPY(kck, &odata[0], 16);
++	DWC_MEMCPY(ptk, &odata[16], 16);
++
++	dump_bytes("kck", kck, 16);
++	dump_bytes("ptk", ptk, 16);
++}
++
++/**
++ * Generates the Message Integrity Code over the Handshake data per the
++ * WUSB spec.
++ *
++ * @param ccm_nonce Pointer to CCM Nonce.
++ * @param kck   Pointer to Key Confirmation Key.
++ * @param data  Pointer to Handshake data to be checked.
++ * @param mic   Pointer to where the MIC output is to be written.
++ */
++void dwc_wusb_gen_mic(uint8_t *ccm_nonce, uint8_t *kck,
++		      uint8_t *data, uint8_t *mic)
++{
++
++	dwc_wusb_prf_64(kck, ccm_nonce, "out-of-bandMIC",
++			data, WUSB_HANDSHAKE_LEN_FOR_MIC, mic);
++}
++
++#endif	/* DWC_CRYPTOLIB */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_crypto.h linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_crypto.h
+--- linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_crypto.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_crypto.h	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,111 @@
++/* =========================================================================
++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_crypto.h $
++ * $Revision: #3 $
++ * $Date: 2010/09/28 $
++ * $Change: 1596182 $
++ *
++ * Synopsys Portability Library Software and documentation
++ * (hereinafter, "Software") is an Unsupported proprietary work of
++ * Synopsys, Inc. unless otherwise expressly agreed to in writing
++ * between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product
++ * under any End User Software License Agreement or Agreement for
++ * Licensed Product with Synopsys or any supplement thereto. You are
++ * permitted to use and redistribute this Software in source and binary
++ * forms, with or without modification, provided that redistributions
++ * of source code must retain this notice. You may not view, use,
++ * disclose, copy or distribute this file or any information contained
++ * herein except pursuant to this license grant from Synopsys. If you
++ * do not agree with this notice, including the disclaimer below, then
++ * you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================= */
++
++#ifndef _DWC_CRYPTO_H_
++#define _DWC_CRYPTO_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/** @file
++ *
++ * This file contains declarations for the WUSB Cryptographic routines as
++ * defined in the WUSB spec.  They are only to be used internally by the DWC UWB
++ * modules.
++ */
++
++#include "dwc_os.h"
++
++int dwc_wusb_aes_encrypt(u8 *src, u8 *key, u8 *dst);
++
++void dwc_wusb_cmf(u8 *key, u8 *nonce,
++		  char *label, u8 *bytes, int len, u8 *result);
++void dwc_wusb_prf(int prf_len, u8 *key,
++		  u8 *nonce, char *label, u8 *bytes, int len, u8 *result);
++
++/**
++ * The PRF-64 function described in section 6.5 of the WUSB spec.
++ *
++ * @param key, nonce, label, bytes, len, result  Same as for dwc_prf().
++ */
++static inline void dwc_wusb_prf_64(u8 *key, u8 *nonce,
++				   char *label, u8 *bytes, int len, u8 *result)
++{
++	dwc_wusb_prf(64, key, nonce, label, bytes, len, result);
++}
++
++/**
++ * The PRF-128 function described in section 6.5 of the WUSB spec.
++ *
++ * @param key, nonce, label, bytes, len, result  Same as for dwc_prf().
++ */
++static inline void dwc_wusb_prf_128(u8 *key, u8 *nonce,
++				    char *label, u8 *bytes, int len, u8 *result)
++{
++	dwc_wusb_prf(128, key, nonce, label, bytes, len, result);
++}
++
++/**
++ * The PRF-256 function described in section 6.5 of the WUSB spec.
++ *
++ * @param key, nonce, label, bytes, len, result  Same as for dwc_prf().
++ */
++static inline void dwc_wusb_prf_256(u8 *key, u8 *nonce,
++				    char *label, u8 *bytes, int len, u8 *result)
++{
++	dwc_wusb_prf(256, key, nonce, label, bytes, len, result);
++}
++
++
++void dwc_wusb_fill_ccm_nonce(uint16_t haddr, uint16_t daddr, uint8_t *tkid,
++			       uint8_t *nonce);
++void dwc_wusb_gen_nonce(uint16_t addr,
++			  uint8_t *nonce);
++
++void dwc_wusb_gen_key(uint8_t *ccm_nonce, uint8_t *mk,
++			uint8_t *hnonce, uint8_t *dnonce,
++			uint8_t *kck, uint8_t *ptk);
++
++
++void dwc_wusb_gen_mic(uint8_t *ccm_nonce, uint8_t
++			*kck, uint8_t *data, uint8_t *mic);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _DWC_CRYPTO_H_ */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_dh.c linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_dh.c
+--- linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_dh.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_dh.c	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,291 @@
++/* =========================================================================
++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_dh.c $
++ * $Revision: #3 $
++ * $Date: 2010/09/28 $
++ * $Change: 1596182 $
++ *
++ * Synopsys Portability Library Software and documentation
++ * (hereinafter, "Software") is an Unsupported proprietary work of
++ * Synopsys, Inc. unless otherwise expressly agreed to in writing
++ * between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product
++ * under any End User Software License Agreement or Agreement for
++ * Licensed Product with Synopsys or any supplement thereto. You are
++ * permitted to use and redistribute this Software in source and binary
++ * forms, with or without modification, provided that redistributions
++ * of source code must retain this notice. You may not view, use,
++ * disclose, copy or distribute this file or any information contained
++ * herein except pursuant to this license grant from Synopsys. If you
++ * do not agree with this notice, including the disclaimer below, then
++ * you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================= */
++#ifdef DWC_CRYPTOLIB
++
++#ifndef CONFIG_MACH_IPMATE
++
++#include "dwc_dh.h"
++#include "dwc_modpow.h"
++
++#ifdef DEBUG
++/* This function prints out a buffer in the format described in the Association
++ * Model specification. */
++static void dh_dump(char *str, void *_num, int len)
++{
++	uint8_t *num = _num;
++	int i;
++	DWC_PRINTF("%s\n", str);
++	for (i = 0; i < len; i ++) {
++		DWC_PRINTF("%02x", num[i]);
++		if (((i + 1) % 2) == 0) DWC_PRINTF(" ");
++		if (((i + 1) % 26) == 0) DWC_PRINTF("\n");
++	}
++
++	DWC_PRINTF("\n");
++}
++#else
++#define dh_dump(_x...) do {; } while(0)
++#endif
++
++/* Constant g value */
++static __u32 dh_g[] = {
++	0x02000000,
++};
++
++/* Constant p value */
++static __u32 dh_p[] = {
++	0xFFFFFFFF, 0xFFFFFFFF, 0xA2DA0FC9, 0x34C26821, 0x8B62C6C4, 0xD11CDC80, 0x084E0229, 0x74CC678A,
++	0xA6BE0B02, 0x229B133B, 0x79084A51, 0xDD04348E, 0xB31995EF, 0x1B433ACD, 0x6D0A2B30, 0x37145FF2,
++	0x6D35E14F, 0x45C2516D, 0x76B585E4, 0xC67E5E62, 0xE9424CF4, 0x6BED37A6, 0xB65CFF0B, 0xEDB706F4,
++	0xFB6B38EE, 0xA59F895A, 0x11249FAE, 0xE61F4B7C, 0x51662849, 0x3D5BE4EC, 0xB87C00C2, 0x05BF63A1,
++	0x3648DA98, 0x9AD3551C, 0xA83F1669, 0x5FCF24FD, 0x235D6583, 0x96ADA3DC, 0x56F3621C, 0xBB528520,
++	0x0729D59E, 0x6D969670, 0x4E350C67, 0x0498BC4A, 0x086C74F1, 0x7C2118CA, 0x465E9032, 0x3BCE362E,
++	0x2C779EE3, 0x03860E18, 0xA283279B, 0x8FA207EC, 0xF05DC5B5, 0xC9524C6F, 0xF6CB2BDE, 0x18175895,
++	0x7C499539, 0xE56A95EA, 0x1826D215, 0x1005FA98, 0x5A8E7215, 0x2DC4AA8A, 0x0D1733AD, 0x337A5004,
++	0xAB2155A8, 0x64BA1CDF, 0x0485FBEC, 0x0AEFDB58, 0x5771EA8A, 0x7D0C065D, 0x850F97B3, 0xC7E4E1A6,
++	0x8CAEF5AB, 0xD73309DB, 0xE0948C1E, 0x9D61254A, 0x26D2E3CE, 0x6BEED21A, 0x06FA2FF1, 0x64088AD9,
++	0x730276D8, 0x646AC83E, 0x182B1F52, 0x0C207B17, 0x5717E1BB, 0x6C5D617A, 0xC0880977, 0xE246D9BA,
++	0xA04FE208, 0x31ABE574, 0xFC5BDB43, 0x8E10FDE0, 0x20D1824B, 0xCAD23AA9, 0xFFFFFFFF, 0xFFFFFFFF,
++};
++
++static void dh_swap_bytes(void *_in, void *_out, uint32_t len)
++{
++	uint8_t *in = _in;
++	uint8_t *out = _out;
++	int i;
++	for (i=0; i<len; i++) {
++		out[i] = in[len-1-i];
++	}
++}
++
++/* Computes the modular exponentiation (num^exp % mod).  num, exp, and mod are
++ * big endian numbers of size len, in bytes.  Each len value must be a multiple
++ * of 4. */
++int dwc_dh_modpow(void *mem_ctx, void *num, uint32_t num_len,
++		  void *exp, uint32_t exp_len,
++		  void *mod, uint32_t mod_len,
++		  void *out)
++{
++	/* modpow() takes little endian numbers.  AM uses big-endian.  This
++	 * function swaps bytes of numbers before passing onto modpow. */
++
++	int retval = 0;
++	uint32_t *result;
++
++	uint32_t *bignum_num = dwc_alloc(mem_ctx, num_len + 4);
++	uint32_t *bignum_exp = dwc_alloc(mem_ctx, exp_len + 4);
++	uint32_t *bignum_mod = dwc_alloc(mem_ctx, mod_len + 4);
++
++	dh_swap_bytes(num, &bignum_num[1], num_len);
++	bignum_num[0] = num_len / 4;
++
++	dh_swap_bytes(exp, &bignum_exp[1], exp_len);
++	bignum_exp[0] = exp_len / 4;
++
++	dh_swap_bytes(mod, &bignum_mod[1], mod_len);
++	bignum_mod[0] = mod_len / 4;
++
++	result = dwc_modpow(mem_ctx, bignum_num, bignum_exp, bignum_mod);
++	if (!result) {
++		retval = -1;
++		goto dh_modpow_nomem;
++	}
++
++	dh_swap_bytes(&result[1], out, result[0] * 4);
++	dwc_free(mem_ctx, result);
++
++ dh_modpow_nomem:
++	dwc_free(mem_ctx, bignum_num);
++	dwc_free(mem_ctx, bignum_exp);
++	dwc_free(mem_ctx, bignum_mod);
++	return retval;
++}
++
++
++int dwc_dh_pk(void *mem_ctx, uint8_t nd, uint8_t *exp, uint8_t *pk, uint8_t *hash)
++{
++	int retval;
++	uint8_t m3[385];
++
++#ifndef DH_TEST_VECTORS
++	DWC_RANDOM_BYTES(exp, 32);
++#endif
++
++	/* Compute the pkd */
++	if ((retval = dwc_dh_modpow(mem_ctx, dh_g, 4,
++				    exp, 32,
++				    dh_p, 384, pk))) {
++		return retval;
++	}
++
++	m3[384] = nd;
++	DWC_MEMCPY(&m3[0], pk, 384);
++	DWC_SHA256(m3, 385, hash);
++
++	dh_dump("PK", pk, 384);
++	dh_dump("SHA-256(M3)", hash, 32);
++	return 0;
++}
++
++int dwc_dh_derive_keys(void *mem_ctx, uint8_t nd, uint8_t *pkh, uint8_t *pkd,
++		       uint8_t *exp, int is_host,
++		       char *dd, uint8_t *ck, uint8_t *kdk)
++{
++	int retval;
++	uint8_t mv[784];
++	uint8_t sha_result[32];
++	uint8_t dhkey[384];
++	uint8_t shared_secret[384];
++	char *message;
++	uint32_t vd;
++
++	uint8_t *pk;
++
++	if (is_host) {
++		pk = pkd;
++	}
++	else {
++		pk = pkh;
++	}
++
++	if ((retval = dwc_dh_modpow(mem_ctx, pk, 384,
++				    exp, 32,
++				    dh_p, 384, shared_secret))) {
++		return retval;
++	}
++	dh_dump("Shared Secret", shared_secret, 384);
++
++	DWC_SHA256(shared_secret, 384, dhkey);
++	dh_dump("DHKEY", dhkey, 384);
++
++	DWC_MEMCPY(&mv[0], pkd, 384);
++	DWC_MEMCPY(&mv[384], pkh, 384);
++	DWC_MEMCPY(&mv[768], "displayed digest", 16);
++	dh_dump("MV", mv, 784);
++
++	DWC_SHA256(mv, 784, sha_result);
++	dh_dump("SHA-256(MV)", sha_result, 32);
++	dh_dump("First 32-bits of SHA-256(MV)", sha_result, 4);
++
++	dh_swap_bytes(sha_result, &vd, 4);
++#ifdef DEBUG
++	DWC_PRINTF("Vd (decimal) = %d\n", vd);
++#endif
++
++	switch (nd) {
++	case 2:
++		vd = vd % 100;
++		DWC_SPRINTF(dd, "%02d", vd);
++		break;
++	case 3:
++		vd = vd % 1000;
++		DWC_SPRINTF(dd, "%03d", vd);
++		break;
++	case 4:
++		vd = vd % 10000;
++		DWC_SPRINTF(dd, "%04d", vd);
++		break;
++	}
++#ifdef DEBUG
++	DWC_PRINTF("Display Digits: %s\n", dd);
++#endif
++
++	message = "connection key";
++	DWC_HMAC_SHA256(message, DWC_STRLEN(message), dhkey, 32, sha_result);
++	dh_dump("HMAC(SHA-256, DHKey, connection key)", sha_result, 32);
++	DWC_MEMCPY(ck, sha_result, 16);
++
++	message = "key derivation key";
++	DWC_HMAC_SHA256(message, DWC_STRLEN(message), dhkey, 32, sha_result);
++	dh_dump("HMAC(SHA-256, DHKey, key derivation key)", sha_result, 32);
++	DWC_MEMCPY(kdk, sha_result, 32);
++
++	return 0;
++}
++
++
++#ifdef DH_TEST_VECTORS
++
++static __u8 dh_a[] = {
++	0x44, 0x00, 0x51, 0xd6,
++	0xf0, 0xb5, 0x5e, 0xa9,
++	0x67, 0xab, 0x31, 0xc6,
++	0x8a, 0x8b, 0x5e, 0x37,
++	0xd9, 0x10, 0xda, 0xe0,
++	0xe2, 0xd4, 0x59, 0xa4,
++	0x86, 0x45, 0x9c, 0xaa,
++	0xdf, 0x36, 0x75, 0x16,
++};
++
++static __u8 dh_b[] = {
++	0x5d, 0xae, 0xc7, 0x86,
++	0x79, 0x80, 0xa3, 0x24,
++	0x8c, 0xe3, 0x57, 0x8f,
++	0xc7, 0x5f, 0x1b, 0x0f,
++	0x2d, 0xf8, 0x9d, 0x30,
++	0x6f, 0xa4, 0x52, 0xcd,
++	0xe0, 0x7a, 0x04, 0x8a,
++	0xde, 0xd9, 0x26, 0x56,
++};
++
++void dwc_run_dh_test_vectors(void *mem_ctx)
++{
++	uint8_t pkd[384];
++	uint8_t pkh[384];
++	uint8_t hashd[32];
++	uint8_t hashh[32];
++	uint8_t ck[16];
++	uint8_t kdk[32];
++	char dd[5];
++
++	DWC_PRINTF("\n\n\nDH_TEST_VECTORS\n\n");
++
++	/* compute the PKd and SHA-256(PKd || Nd) */
++	DWC_PRINTF("Computing PKd\n");
++	dwc_dh_pk(mem_ctx, 2, dh_a, pkd, hashd);
++
++	/* compute the PKd and SHA-256(PKh || Nd) */
++	DWC_PRINTF("Computing PKh\n");
++	dwc_dh_pk(mem_ctx, 2, dh_b, pkh, hashh);
++
++	/* compute the dhkey */
++	dwc_dh_derive_keys(mem_ctx, 2, pkh, pkd, dh_a, 0, dd, ck, kdk);
++}
++#endif /* DH_TEST_VECTORS */
++
++#endif /* !CONFIG_MACH_IPMATE */
++
++#endif /* DWC_CRYPTOLIB */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_dh.h linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_dh.h
+--- linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_dh.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_dh.h	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,106 @@
++/* =========================================================================
++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_dh.h $
++ * $Revision: #4 $
++ * $Date: 2010/09/28 $
++ * $Change: 1596182 $
++ *
++ * Synopsys Portability Library Software and documentation
++ * (hereinafter, "Software") is an Unsupported proprietary work of
++ * Synopsys, Inc. unless otherwise expressly agreed to in writing
++ * between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product
++ * under any End User Software License Agreement or Agreement for
++ * Licensed Product with Synopsys or any supplement thereto. You are
++ * permitted to use and redistribute this Software in source and binary
++ * forms, with or without modification, provided that redistributions
++ * of source code must retain this notice. You may not view, use,
++ * disclose, copy or distribute this file or any information contained
++ * herein except pursuant to this license grant from Synopsys. If you
++ * do not agree with this notice, including the disclaimer below, then
++ * you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================= */
++#ifndef _DWC_DH_H_
++#define _DWC_DH_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#include "dwc_os.h"
++
++/** @file
++ *
++ * This file defines the common functions on device and host for performing
++ * numeric association as defined in the WUSB spec.  They are only to be
++ * used internally by the DWC UWB modules. */
++
++extern int dwc_dh_sha256(uint8_t *message, uint32_t len, uint8_t *out);
++extern int dwc_dh_hmac_sha256(uint8_t *message, uint32_t messagelen,
++			      uint8_t *key, uint32_t keylen,
++			      uint8_t *out);
++extern int dwc_dh_modpow(void *mem_ctx, void *num, uint32_t num_len,
++			 void *exp, uint32_t exp_len,
++			 void *mod, uint32_t mod_len,
++			 void *out);
++
++/** Computes PKD or PKH, and SHA-256(PKd || Nd)
++ *
++ * PK = g^exp mod p.
++ *
++ * Input:
++ * Nd = Number of digits on the device.
++ *
++ * Output:
++ * exp = A 32-byte buffer to be filled with a randomly generated number.
++ *       used as either A or B.
++ * pk = A 384-byte buffer to be filled with the PKH or PKD.
++ * hash = A 32-byte buffer to be filled with SHA-256(PK || ND).
++ */
++extern int dwc_dh_pk(void *mem_ctx, uint8_t nd, uint8_t *exp, uint8_t *pkd, uint8_t *hash);
++
++/** Computes the DHKEY, and VD.
++ *
++ * If called from host, then it will comput DHKEY=PKD^exp % p.
++ * If called from device, then it will comput DHKEY=PKH^exp % p.
++ *
++ * Input:
++ * pkd = The PKD value.
++ * pkh = The PKH value.
++ * exp = The A value (if device) or B value (if host) generated in dwc_wudev_dh_pk.
++ * is_host = Set to non zero if a WUSB host is calling this function.
++ *
++ * Output:
++
++ * dd = A pointer to an buffer to be set to the displayed digits string to be shown
++ *      to the user.  This buffer should be at 5 bytes long to hold 4 digits plus a
++ *      null termination character.  This buffer can be used directly for display.
++ * ck = A 16-byte buffer to be filled with the CK.
++ * kdk = A 32-byte buffer to be filled with the KDK.
++ */
++extern int dwc_dh_derive_keys(void *mem_ctx, uint8_t nd, uint8_t *pkh, uint8_t *pkd,
++			      uint8_t *exp, int is_host,
++			      char *dd, uint8_t *ck, uint8_t *kdk);
++
++#ifdef DH_TEST_VECTORS
++extern void dwc_run_dh_test_vectors(void);
++#endif
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _DWC_DH_H_ */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_list.h linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_list.h
+--- linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_list.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_list.h	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,594 @@
++/*	$OpenBSD: queue.h,v 1.26 2004/05/04 16:59:32 grange Exp $	*/
++/*	$NetBSD: queue.h,v 1.11 1996/05/16 05:17:14 mycroft Exp $	*/
++
++/*
++ * Copyright (c) 1991, 1993
++ *	The Regents of the University of California.  All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions and the following disclaimer.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. Neither the name of the University nor the names of its contributors
++ *    may be used to endorse or promote products derived from this software
++ *    without specific prior written permission.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
++ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
++ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
++ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
++ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
++ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
++ * SUCH DAMAGE.
++ *
++ *	@(#)queue.h	8.5 (Berkeley) 8/20/94
++ */
++
++#ifndef _DWC_LIST_H_
++#define _DWC_LIST_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/** @file
++ *
++ * This file defines linked list operations.  It is derived from BSD with
++ * only the MACRO names being prefixed with DWC_.  This is because a few of
++ * these names conflict with those on Linux.  For documentation on use, see the
++ * inline comments in the source code.  The original license for this source
++ * code applies and is preserved in the dwc_list.h source file.
++ */
++
++/*
++ * This file defines five types of data structures: singly-linked lists,
++ * lists, simple queues, tail queues, and circular queues.
++ *
++ *
++ * A singly-linked list is headed by a single forward pointer. The elements
++ * are singly linked for minimum space and pointer manipulation overhead at
++ * the expense of O(n) removal for arbitrary elements. New elements can be
++ * added to the list after an existing element or at the head of the list.
++ * Elements being removed from the head of the list should use the explicit
++ * macro for this purpose for optimum efficiency. A singly-linked list may
++ * only be traversed in the forward direction.  Singly-linked lists are ideal
++ * for applications with large datasets and few or no removals or for
++ * implementing a LIFO queue.
++ *
++ * A list is headed by a single forward pointer (or an array of forward
++ * pointers for a hash table header). The elements are doubly linked
++ * so that an arbitrary element can be removed without a need to
++ * traverse the list. New elements can be added to the list before
++ * or after an existing element or at the head of the list. A list
++ * may only be traversed in the forward direction.
++ *
++ * A simple queue is headed by a pair of pointers, one the head of the
++ * list and the other to the tail of the list. The elements are singly
++ * linked to save space, so elements can only be removed from the
++ * head of the list. New elements can be added to the list before or after
++ * an existing element, at the head of the list, or at the end of the
++ * list. A simple queue may only be traversed in the forward direction.
++ *
++ * A tail queue is headed by a pair of pointers, one to the head of the
++ * list and the other to the tail of the list. The elements are doubly
++ * linked so that an arbitrary element can be removed without a need to
++ * traverse the list. New elements can be added to the list before or
++ * after an existing element, at the head of the list, or at the end of
++ * the list. A tail queue may be traversed in either direction.
++ *
++ * A circle queue is headed by a pair of pointers, one to the head of the
++ * list and the other to the tail of the list. The elements are doubly
++ * linked so that an arbitrary element can be removed without a need to
++ * traverse the list. New elements can be added to the list before or after
++ * an existing element, at the head of the list, or at the end of the list.
++ * A circle queue may be traversed in either direction, but has a more
++ * complex end of list detection.
++ *
++ * For details on the use of these macros, see the queue(3) manual page.
++ */
++
++/*
++ * Double-linked List.
++ */
++
++typedef struct dwc_list_link {
++	struct dwc_list_link *next;
++	struct dwc_list_link *prev;
++} dwc_list_link_t;
++
++#define DWC_LIST_INIT(link) do {	\
++	(link)->next = (link);		\
++	(link)->prev = (link);		\
++} while (0)
++
++#define DWC_LIST_FIRST(link)	((link)->next)
++#define DWC_LIST_LAST(link)	((link)->prev)
++#define DWC_LIST_END(link)	(link)
++#define DWC_LIST_NEXT(link)	((link)->next)
++#define DWC_LIST_PREV(link)	((link)->prev)
++#define DWC_LIST_EMPTY(link)	\
++	(DWC_LIST_FIRST(link) == DWC_LIST_END(link))
++#define DWC_LIST_ENTRY(link, type, field)			\
++	(type *)((uint8_t *)(link) - (size_t)(&((type *)0)->field))
++
++#if 0
++#define DWC_LIST_INSERT_HEAD(list, link) do {			\
++	(link)->next = (list)->next;				\
++	(link)->prev = (list);					\
++	(list)->next->prev = (link);				\
++	(list)->next = (link);					\
++} while (0)
++
++#define DWC_LIST_INSERT_TAIL(list, link) do {			\
++	(link)->next = (list);					\
++	(link)->prev = (list)->prev;				\
++	(list)->prev->next = (link);				\
++	(list)->prev = (link);					\
++} while (0)
++#else
++#define DWC_LIST_INSERT_HEAD(list, link) do {			\
++	dwc_list_link_t *__next__ = (list)->next;		\
++	__next__->prev = (link);				\
++	(link)->next = __next__;				\
++	(link)->prev = (list);					\
++	(list)->next = (link);					\
++} while (0)
++
++#define DWC_LIST_INSERT_TAIL(list, link) do {			\
++	dwc_list_link_t *__prev__ = (list)->prev;		\
++	(list)->prev = (link);					\
++	(link)->next = (list);					\
++	(link)->prev = __prev__;				\
++	__prev__->next = (link);				\
++} while (0)
++#endif
++
++#if 0
++static inline void __list_add(struct list_head *new,
++                              struct list_head *prev,
++                              struct list_head *next)
++{
++        next->prev = new;
++        new->next = next;
++        new->prev = prev;
++        prev->next = new;
++}
++
++static inline void list_add(struct list_head *new, struct list_head *head)
++{
++        __list_add(new, head, head->next);
++}
++
++static inline void list_add_tail(struct list_head *new, struct list_head *head)
++{
++        __list_add(new, head->prev, head);
++}
++
++static inline void __list_del(struct list_head * prev, struct list_head * next)
++{
++        next->prev = prev;
++        prev->next = next;
++}
++
++static inline void list_del(struct list_head *entry)
++{
++        __list_del(entry->prev, entry->next);
++        entry->next = LIST_POISON1;
++        entry->prev = LIST_POISON2;
++}
++#endif
++
++#define DWC_LIST_REMOVE(link) do {				\
++	(link)->next->prev = (link)->prev;			\
++	(link)->prev->next = (link)->next;			\
++} while (0)
++
++#define DWC_LIST_REMOVE_INIT(link) do {				\
++	DWC_LIST_REMOVE(link);					\
++	DWC_LIST_INIT(link);					\
++} while (0)
++
++#define DWC_LIST_MOVE_HEAD(list, link) do {			\
++	DWC_LIST_REMOVE(link);					\
++	DWC_LIST_INSERT_HEAD(list, link);			\
++} while (0)
++
++#define DWC_LIST_MOVE_TAIL(list, link) do {			\
++	DWC_LIST_REMOVE(link);					\
++	DWC_LIST_INSERT_TAIL(list, link);			\
++} while (0)
++
++#define DWC_LIST_FOREACH(var, list)				\
++	for((var) = DWC_LIST_FIRST(list);			\
++	    (var) != DWC_LIST_END(list);			\
++	    (var) = DWC_LIST_NEXT(var))
++
++#define DWC_LIST_FOREACH_SAFE(var, var2, list)			\
++	for((var) = DWC_LIST_FIRST(list), (var2) = DWC_LIST_NEXT(var);	\
++	    (var) != DWC_LIST_END(list);			\
++	    (var) = (var2), (var2) = DWC_LIST_NEXT(var2))
++
++#define DWC_LIST_FOREACH_REVERSE(var, list)			\
++	for((var) = DWC_LIST_LAST(list);			\
++	    (var) != DWC_LIST_END(list);			\
++	    (var) = DWC_LIST_PREV(var))
++
++/*
++ * Singly-linked List definitions.
++ */
++#define DWC_SLIST_HEAD(name, type)					\
++struct name {								\
++	struct type *slh_first;	/* first element */			\
++}
++
++#define DWC_SLIST_HEAD_INITIALIZER(head)				\
++	{ NULL }
++
++#define DWC_SLIST_ENTRY(type)						\
++struct {								\
++	struct type *sle_next;	/* next element */			\
++}
++
++/*
++ * Singly-linked List access methods.
++ */
++#define DWC_SLIST_FIRST(head)	((head)->slh_first)
++#define DWC_SLIST_END(head)		NULL
++#define DWC_SLIST_EMPTY(head)	(SLIST_FIRST(head) == SLIST_END(head))
++#define DWC_SLIST_NEXT(elm, field)	((elm)->field.sle_next)
++
++#define DWC_SLIST_FOREACH(var, head, field)				\
++	for((var) = SLIST_FIRST(head);					\
++	    (var) != SLIST_END(head);					\
++	    (var) = SLIST_NEXT(var, field))
++
++#define DWC_SLIST_FOREACH_PREVPTR(var, varp, head, field)		\
++	for((varp) = &SLIST_FIRST((head));				\
++	    ((var) = *(varp)) != SLIST_END(head);			\
++	    (varp) = &SLIST_NEXT((var), field))
++
++/*
++ * Singly-linked List functions.
++ */
++#define DWC_SLIST_INIT(head) {						\
++	SLIST_FIRST(head) = SLIST_END(head);				\
++}
++
++#define DWC_SLIST_INSERT_AFTER(slistelm, elm, field) do {		\
++	(elm)->field.sle_next = (slistelm)->field.sle_next;		\
++	(slistelm)->field.sle_next = (elm);				\
++} while (0)
++
++#define DWC_SLIST_INSERT_HEAD(head, elm, field) do {			\
++	(elm)->field.sle_next = (head)->slh_first;			\
++	(head)->slh_first = (elm);					\
++} while (0)
++
++#define DWC_SLIST_REMOVE_NEXT(head, elm, field) do {			\
++	(elm)->field.sle_next = (elm)->field.sle_next->field.sle_next;	\
++} while (0)
++
++#define DWC_SLIST_REMOVE_HEAD(head, field) do {				\
++	(head)->slh_first = (head)->slh_first->field.sle_next;		\
++} while (0)
++
++#define DWC_SLIST_REMOVE(head, elm, type, field) do {			\
++	if ((head)->slh_first == (elm)) {				\
++		SLIST_REMOVE_HEAD((head), field);			\
++	}								\
++	else {								\
++		struct type *curelm = (head)->slh_first;		\
++		while( curelm->field.sle_next != (elm) )		\
++			curelm = curelm->field.sle_next;		\
++		curelm->field.sle_next =				\
++		    curelm->field.sle_next->field.sle_next;		\
++	}								\
++} while (0)
++
++/*
++ * Simple queue definitions.
++ */
++#define DWC_SIMPLEQ_HEAD(name, type)					\
++struct name {								\
++	struct type *sqh_first;	/* first element */			\
++	struct type **sqh_last;	/* addr of last next element */		\
++}
++
++#define DWC_SIMPLEQ_HEAD_INITIALIZER(head)				\
++	{ NULL, &(head).sqh_first }
++
++#define DWC_SIMPLEQ_ENTRY(type)						\
++struct {								\
++	struct type *sqe_next;	/* next element */			\
++}
++
++/*
++ * Simple queue access methods.
++ */
++#define DWC_SIMPLEQ_FIRST(head)	    ((head)->sqh_first)
++#define DWC_SIMPLEQ_END(head)	    NULL
++#define DWC_SIMPLEQ_EMPTY(head)	    (SIMPLEQ_FIRST(head) == SIMPLEQ_END(head))
++#define DWC_SIMPLEQ_NEXT(elm, field)    ((elm)->field.sqe_next)
++
++#define DWC_SIMPLEQ_FOREACH(var, head, field)				\
++	for((var) = SIMPLEQ_FIRST(head);				\
++	    (var) != SIMPLEQ_END(head);					\
++	    (var) = SIMPLEQ_NEXT(var, field))
++
++/*
++ * Simple queue functions.
++ */
++#define DWC_SIMPLEQ_INIT(head) do {					\
++	(head)->sqh_first = NULL;					\
++	(head)->sqh_last = &(head)->sqh_first;				\
++} while (0)
++
++#define DWC_SIMPLEQ_INSERT_HEAD(head, elm, field) do {			\
++	if (((elm)->field.sqe_next = (head)->sqh_first) == NULL)	\
++		(head)->sqh_last = &(elm)->field.sqe_next;		\
++	(head)->sqh_first = (elm);					\
++} while (0)
++
++#define DWC_SIMPLEQ_INSERT_TAIL(head, elm, field) do {			\
++	(elm)->field.sqe_next = NULL;					\
++	*(head)->sqh_last = (elm);					\
++	(head)->sqh_last = &(elm)->field.sqe_next;			\
++} while (0)
++
++#define DWC_SIMPLEQ_INSERT_AFTER(head, listelm, elm, field) do {	\
++	if (((elm)->field.sqe_next = (listelm)->field.sqe_next) == NULL)\
++		(head)->sqh_last = &(elm)->field.sqe_next;		\
++	(listelm)->field.sqe_next = (elm);				\
++} while (0)
++
++#define DWC_SIMPLEQ_REMOVE_HEAD(head, field) do {			\
++	if (((head)->sqh_first = (head)->sqh_first->field.sqe_next) == NULL) \
++		(head)->sqh_last = &(head)->sqh_first;			\
++} while (0)
++
++/*
++ * Tail queue definitions.
++ */
++#define DWC_TAILQ_HEAD(name, type)					\
++struct name {								\
++	struct type *tqh_first;	/* first element */			\
++	struct type **tqh_last;	/* addr of last next element */		\
++}
++
++#define DWC_TAILQ_HEAD_INITIALIZER(head)				\
++	{ NULL, &(head).tqh_first }
++
++#define DWC_TAILQ_ENTRY(type)						\
++struct {								\
++	struct type *tqe_next;	/* next element */			\
++	struct type **tqe_prev;	/* address of previous next element */	\
++}
++
++/*
++ * tail queue access methods
++ */
++#define DWC_TAILQ_FIRST(head)		((head)->tqh_first)
++#define DWC_TAILQ_END(head)		NULL
++#define DWC_TAILQ_NEXT(elm, field)	((elm)->field.tqe_next)
++#define DWC_TAILQ_LAST(head, headname)					\
++	(*(((struct headname *)((head)->tqh_last))->tqh_last))
++/* XXX */
++#define DWC_TAILQ_PREV(elm, headname, field)				\
++	(*(((struct headname *)((elm)->field.tqe_prev))->tqh_last))
++#define DWC_TAILQ_EMPTY(head)						\
++	(DWC_TAILQ_FIRST(head) == DWC_TAILQ_END(head))
++
++#define DWC_TAILQ_FOREACH(var, head, field)				\
++	for ((var) = DWC_TAILQ_FIRST(head);				\
++	    (var) != DWC_TAILQ_END(head);				\
++	    (var) = DWC_TAILQ_NEXT(var, field))
++
++#define DWC_TAILQ_FOREACH_REVERSE(var, head, headname, field)		\
++	for ((var) = DWC_TAILQ_LAST(head, headname);			\
++	    (var) != DWC_TAILQ_END(head);				\
++	    (var) = DWC_TAILQ_PREV(var, headname, field))
++
++/*
++ * Tail queue functions.
++ */
++#define DWC_TAILQ_INIT(head) do {					\
++	(head)->tqh_first = NULL;					\
++	(head)->tqh_last = &(head)->tqh_first;				\
++} while (0)
++
++#define DWC_TAILQ_INSERT_HEAD(head, elm, field) do {			\
++	if (((elm)->field.tqe_next = (head)->tqh_first) != NULL)	\
++		(head)->tqh_first->field.tqe_prev =			\
++		    &(elm)->field.tqe_next;				\
++	else								\
++		(head)->tqh_last = &(elm)->field.tqe_next;		\
++	(head)->tqh_first = (elm);					\
++	(elm)->field.tqe_prev = &(head)->tqh_first;			\
++} while (0)
++
++#define DWC_TAILQ_INSERT_TAIL(head, elm, field) do {			\
++	(elm)->field.tqe_next = NULL;					\
++	(elm)->field.tqe_prev = (head)->tqh_last;			\
++	*(head)->tqh_last = (elm);					\
++	(head)->tqh_last = &(elm)->field.tqe_next;			\
++} while (0)
++
++#define DWC_TAILQ_INSERT_AFTER(head, listelm, elm, field) do {		\
++	if (((elm)->field.tqe_next = (listelm)->field.tqe_next) != NULL)\
++		(elm)->field.tqe_next->field.tqe_prev =			\
++		    &(elm)->field.tqe_next;				\
++	else								\
++		(head)->tqh_last = &(elm)->field.tqe_next;		\
++	(listelm)->field.tqe_next = (elm);				\
++	(elm)->field.tqe_prev = &(listelm)->field.tqe_next;		\
++} while (0)
++
++#define DWC_TAILQ_INSERT_BEFORE(listelm, elm, field) do {		\
++	(elm)->field.tqe_prev = (listelm)->field.tqe_prev;		\
++	(elm)->field.tqe_next = (listelm);				\
++	*(listelm)->field.tqe_prev = (elm);				\
++	(listelm)->field.tqe_prev = &(elm)->field.tqe_next;		\
++} while (0)
++
++#define DWC_TAILQ_REMOVE(head, elm, field) do {				\
++	if (((elm)->field.tqe_next) != NULL)				\
++		(elm)->field.tqe_next->field.tqe_prev =			\
++		    (elm)->field.tqe_prev;				\
++	else								\
++		(head)->tqh_last = (elm)->field.tqe_prev;		\
++	*(elm)->field.tqe_prev = (elm)->field.tqe_next;			\
++} while (0)
++
++#define DWC_TAILQ_REPLACE(head, elm, elm2, field) do {			\
++	if (((elm2)->field.tqe_next = (elm)->field.tqe_next) != NULL)	\
++		(elm2)->field.tqe_next->field.tqe_prev =		\
++		    &(elm2)->field.tqe_next;				\
++	else								\
++		(head)->tqh_last = &(elm2)->field.tqe_next;		\
++	(elm2)->field.tqe_prev = (elm)->field.tqe_prev;			\
++	*(elm2)->field.tqe_prev = (elm2);				\
++} while (0)
++
++/*
++ * Circular queue definitions.
++ */
++#define DWC_CIRCLEQ_HEAD(name, type)					\
++struct name {								\
++	struct type *cqh_first;		/* first element */		\
++	struct type *cqh_last;		/* last element */		\
++}
++
++#define DWC_CIRCLEQ_HEAD_INITIALIZER(head)				\
++	{ DWC_CIRCLEQ_END(&head), DWC_CIRCLEQ_END(&head) }
++
++#define DWC_CIRCLEQ_ENTRY(type)						\
++struct {								\
++	struct type *cqe_next;		/* next element */		\
++	struct type *cqe_prev;		/* previous element */		\
++}
++
++/*
++ * Circular queue access methods
++ */
++#define DWC_CIRCLEQ_FIRST(head)		((head)->cqh_first)
++#define DWC_CIRCLEQ_LAST(head)		((head)->cqh_last)
++#define DWC_CIRCLEQ_END(head)		((void *)(head))
++#define DWC_CIRCLEQ_NEXT(elm, field)	((elm)->field.cqe_next)
++#define DWC_CIRCLEQ_PREV(elm, field)	((elm)->field.cqe_prev)
++#define DWC_CIRCLEQ_EMPTY(head)						\
++	(DWC_CIRCLEQ_FIRST(head) == DWC_CIRCLEQ_END(head))
++
++#define DWC_CIRCLEQ_EMPTY_ENTRY(elm, field) (((elm)->field.cqe_next == NULL) && ((elm)->field.cqe_prev == NULL))
++
++#define DWC_CIRCLEQ_FOREACH(var, head, field)				\
++	for((var) = DWC_CIRCLEQ_FIRST(head);				\
++	    (var) != DWC_CIRCLEQ_END(head);				\
++	    (var) = DWC_CIRCLEQ_NEXT(var, field))
++
++#define DWC_CIRCLEQ_FOREACH_SAFE(var, var2, head, field)			\
++	for((var) = DWC_CIRCLEQ_FIRST(head), var2 = DWC_CIRCLEQ_NEXT(var, field); \
++	    (var) != DWC_CIRCLEQ_END(head);					\
++	    (var) = var2, var2 = DWC_CIRCLEQ_NEXT(var, field))
++
++#define DWC_CIRCLEQ_FOREACH_REVERSE(var, head, field)			\
++	for((var) = DWC_CIRCLEQ_LAST(head);				\
++	    (var) != DWC_CIRCLEQ_END(head);				\
++	    (var) = DWC_CIRCLEQ_PREV(var, field))
++
++/*
++ * Circular queue functions.
++ */
++#define DWC_CIRCLEQ_INIT(head) do {					\
++	(head)->cqh_first = DWC_CIRCLEQ_END(head);			\
++	(head)->cqh_last = DWC_CIRCLEQ_END(head);			\
++} while (0)
++
++#define DWC_CIRCLEQ_INIT_ENTRY(elm, field) do {				\
++	(elm)->field.cqe_next = NULL;					\
++	(elm)->field.cqe_prev = NULL;					\
++} while (0)
++
++#define DWC_CIRCLEQ_INSERT_AFTER(head, listelm, elm, field) do {	\
++	(elm)->field.cqe_next = (listelm)->field.cqe_next;		\
++	(elm)->field.cqe_prev = (listelm);				\
++	if ((listelm)->field.cqe_next == DWC_CIRCLEQ_END(head))		\
++		(head)->cqh_last = (elm);				\
++	else								\
++		(listelm)->field.cqe_next->field.cqe_prev = (elm);	\
++	(listelm)->field.cqe_next = (elm);				\
++} while (0)
++
++#define DWC_CIRCLEQ_INSERT_BEFORE(head, listelm, elm, field) do {	\
++	(elm)->field.cqe_next = (listelm);				\
++	(elm)->field.cqe_prev = (listelm)->field.cqe_prev;		\
++	if ((listelm)->field.cqe_prev == DWC_CIRCLEQ_END(head))		\
++		(head)->cqh_first = (elm);				\
++	else								\
++		(listelm)->field.cqe_prev->field.cqe_next = (elm);	\
++	(listelm)->field.cqe_prev = (elm);				\
++} while (0)
++
++#define DWC_CIRCLEQ_INSERT_HEAD(head, elm, field) do {			\
++	(elm)->field.cqe_next = (head)->cqh_first;			\
++	(elm)->field.cqe_prev = DWC_CIRCLEQ_END(head);			\
++	if ((head)->cqh_last == DWC_CIRCLEQ_END(head))			\
++		(head)->cqh_last = (elm);				\
++	else								\
++		(head)->cqh_first->field.cqe_prev = (elm);		\
++	(head)->cqh_first = (elm);					\
++} while (0)
++
++#define DWC_CIRCLEQ_INSERT_TAIL(head, elm, field) do {			\
++	(elm)->field.cqe_next = DWC_CIRCLEQ_END(head);			\
++	(elm)->field.cqe_prev = (head)->cqh_last;			\
++	if ((head)->cqh_first == DWC_CIRCLEQ_END(head))			\
++		(head)->cqh_first = (elm);				\
++	else								\
++		(head)->cqh_last->field.cqe_next = (elm);		\
++	(head)->cqh_last = (elm);					\
++} while (0)
++
++#define DWC_CIRCLEQ_REMOVE(head, elm, field) do {			\
++	if ((elm)->field.cqe_next == DWC_CIRCLEQ_END(head))		\
++		(head)->cqh_last = (elm)->field.cqe_prev;		\
++	else								\
++		(elm)->field.cqe_next->field.cqe_prev =			\
++		    (elm)->field.cqe_prev;				\
++	if ((elm)->field.cqe_prev == DWC_CIRCLEQ_END(head))		\
++		(head)->cqh_first = (elm)->field.cqe_next;		\
++	else								\
++		(elm)->field.cqe_prev->field.cqe_next =			\
++		    (elm)->field.cqe_next;				\
++} while (0)
++
++#define DWC_CIRCLEQ_REMOVE_INIT(head, elm, field) do {			\
++	DWC_CIRCLEQ_REMOVE(head, elm, field);				\
++	DWC_CIRCLEQ_INIT_ENTRY(elm, field);				\
++} while (0)
++
++#define DWC_CIRCLEQ_REPLACE(head, elm, elm2, field) do {		\
++	if (((elm2)->field.cqe_next = (elm)->field.cqe_next) ==		\
++	    DWC_CIRCLEQ_END(head))					\
++		(head).cqh_last = (elm2);				\
++	else								\
++		(elm2)->field.cqe_next->field.cqe_prev = (elm2);	\
++	if (((elm2)->field.cqe_prev = (elm)->field.cqe_prev) ==		\
++	    DWC_CIRCLEQ_END(head))					\
++		(head).cqh_first = (elm2);				\
++	else								\
++		(elm2)->field.cqe_prev->field.cqe_next = (elm2);	\
++} while (0)
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _DWC_LIST_H_ */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_mem.c linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_mem.c
+--- linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_mem.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_mem.c	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,245 @@
++/* Memory Debugging */
++#ifdef DWC_DEBUG_MEMORY
++
++#include "dwc_os.h"
++#include "dwc_list.h"
++
++struct allocation {
++	void *addr;
++	void *ctx;
++	char *func;
++	int line;
++	uint32_t size;
++	int dma;
++	DWC_CIRCLEQ_ENTRY(allocation) entry;
++};
++
++DWC_CIRCLEQ_HEAD(allocation_queue, allocation);
++
++struct allocation_manager {
++	void *mem_ctx;
++	struct allocation_queue allocations;
++
++	/* statistics */
++	int num;
++	int num_freed;
++	int num_active;
++	uint32_t total;
++	uint32_t cur;
++	uint32_t max;
++};
++
++static struct allocation_manager *manager = NULL;
++
++static int add_allocation(void *ctx, uint32_t size, char const *func, int line, void *addr,
++			  int dma)
++{
++	struct allocation *a;
++
++	DWC_ASSERT(manager != NULL, "manager not allocated");
++
++	a = __DWC_ALLOC_ATOMIC(manager->mem_ctx, sizeof(*a));
++	if (!a) {
++		return -DWC_E_NO_MEMORY;
++	}
++
++	a->func = __DWC_ALLOC_ATOMIC(manager->mem_ctx, DWC_STRLEN(func) + 1);
++	if (!a->func) {
++		__DWC_FREE(manager->mem_ctx, a);
++		return -DWC_E_NO_MEMORY;
++	}
++
++	DWC_MEMCPY(a->func, func, DWC_STRLEN(func) + 1);
++	a->addr = addr;
++	a->ctx = ctx;
++	a->line = line;
++	a->size = size;
++	a->dma = dma;
++	DWC_CIRCLEQ_INSERT_TAIL(&manager->allocations, a, entry);
++
++	/* Update stats */
++	manager->num++;
++	manager->num_active++;
++	manager->total += size;
++	manager->cur += size;
++
++	if (manager->max < manager->cur) {
++		manager->max = manager->cur;
++	}
++
++	return 0;
++}
++
++static struct allocation *find_allocation(void *ctx, void *addr)
++{
++	struct allocation *a;
++
++	DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) {
++		if (a->ctx == ctx && a->addr == addr) {
++			return a;
++		}
++	}
++
++	return NULL;
++}
++
++static void free_allocation(void *ctx, void *addr, char const *func, int line)
++{
++	struct allocation *a = find_allocation(ctx, addr);
++
++	if (!a) {
++		DWC_ASSERT(0,
++			   "Free of address %p that was never allocated or already freed %s:%d",
++			   addr, func, line);
++		return;
++	}
++
++	DWC_CIRCLEQ_REMOVE(&manager->allocations, a, entry);
++
++	manager->num_active--;
++	manager->num_freed++;
++	manager->cur -= a->size;
++	__DWC_FREE(manager->mem_ctx, a->func);
++	__DWC_FREE(manager->mem_ctx, a);
++}
++
++int dwc_memory_debug_start(void *mem_ctx)
++{
++	DWC_ASSERT(manager == NULL, "Memory debugging has already started\n");
++
++	if (manager) {
++		return -DWC_E_BUSY;
++	}
++
++	manager = __DWC_ALLOC(mem_ctx, sizeof(*manager));
++	if (!manager) {
++		return -DWC_E_NO_MEMORY;
++	}
++
++	DWC_CIRCLEQ_INIT(&manager->allocations);
++	manager->mem_ctx = mem_ctx;
++	manager->num = 0;
++	manager->num_freed = 0;
++	manager->num_active = 0;
++	manager->total = 0;
++	manager->cur = 0;
++	manager->max = 0;
++
++	return 0;
++}
++
++void dwc_memory_debug_stop(void)
++{
++	struct allocation *a;
++
++	dwc_memory_debug_report();
++
++	DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) {
++		DWC_ERROR("Memory leaked from %s:%d\n", a->func, a->line);
++		free_allocation(a->ctx, a->addr, NULL, -1);
++	}
++
++	__DWC_FREE(manager->mem_ctx, manager);
++}
++
++void dwc_memory_debug_report(void)
++{
++	struct allocation *a;
++
++	DWC_PRINTF("\n\n\n----------------- Memory Debugging Report -----------------\n\n");
++	DWC_PRINTF("Num Allocations = %d\n", manager->num);
++	DWC_PRINTF("Freed = %d\n", manager->num_freed);
++	DWC_PRINTF("Active = %d\n", manager->num_active);
++	DWC_PRINTF("Current Memory Used = %d\n", manager->cur);
++	DWC_PRINTF("Total Memory Used = %d\n", manager->total);
++	DWC_PRINTF("Maximum Memory Used at Once = %d\n", manager->max);
++	DWC_PRINTF("Unfreed allocations:\n");
++
++	DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) {
++		DWC_PRINTF("    addr=%p, size=%d from %s:%d, DMA=%d\n",
++			   a->addr, a->size, a->func, a->line, a->dma);
++	}
++}
++
++/* The replacement functions */
++void *dwc_alloc_debug(void *mem_ctx, uint32_t size, char const *func, int line)
++{
++	void *addr = __DWC_ALLOC(mem_ctx, size);
++
++	if (!addr) {
++		return NULL;
++	}
++
++	if (add_allocation(mem_ctx, size, func, line, addr, 0)) {
++		__DWC_FREE(mem_ctx, addr);
++		return NULL;
++	}
++
++	return addr;
++}
++
++void *dwc_alloc_atomic_debug(void *mem_ctx, uint32_t size, char const *func,
++			     int line)
++{
++	void *addr = __DWC_ALLOC_ATOMIC(mem_ctx, size);
++
++	if (!addr) {
++		return NULL;
++	}
++
++	if (add_allocation(mem_ctx, size, func, line, addr, 0)) {
++		__DWC_FREE(mem_ctx, addr);
++		return NULL;
++	}
++
++	return addr;
++}
++
++void dwc_free_debug(void *mem_ctx, void *addr, char const *func, int line)
++{
++	free_allocation(mem_ctx, addr, func, line);
++	__DWC_FREE(mem_ctx, addr);
++}
++
++void *dwc_dma_alloc_debug(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr,
++			  char const *func, int line)
++{
++	void *addr = __DWC_DMA_ALLOC(dma_ctx, size, dma_addr);
++
++	if (!addr) {
++		return NULL;
++	}
++
++	if (add_allocation(dma_ctx, size, func, line, addr, 1)) {
++		__DWC_DMA_FREE(dma_ctx, size, addr, *dma_addr);
++		return NULL;
++	}
++
++	return addr;
++}
++
++void *dwc_dma_alloc_atomic_debug(void *dma_ctx, uint32_t size,
++				 dwc_dma_t *dma_addr, char const *func, int line)
++{
++	void *addr = __DWC_DMA_ALLOC_ATOMIC(dma_ctx, size, dma_addr);
++
++	if (!addr) {
++		return NULL;
++	}
++
++	if (add_allocation(dma_ctx, size, func, line, addr, 1)) {
++		__DWC_DMA_FREE(dma_ctx, size, addr, *dma_addr);
++		return NULL;
++	}
++
++	return addr;
++}
++
++void dwc_dma_free_debug(void *dma_ctx, uint32_t size, void *virt_addr,
++			dwc_dma_t dma_addr, char const *func, int line)
++{
++	free_allocation(dma_ctx, virt_addr, func, line);
++	__DWC_DMA_FREE(dma_ctx, size, virt_addr, dma_addr);
++}
++
++#endif /* DWC_DEBUG_MEMORY */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_modpow.c linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_modpow.c
+--- linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_modpow.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_modpow.c	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,636 @@
++/* Bignum routines adapted from PUTTY sources.  PuTTY copyright notice follows.
++ *
++ * PuTTY is copyright 1997-2007 Simon Tatham.
++ *
++ * Portions copyright Robert de Bath, Joris van Rantwijk, Delian
++ * Delchev, Andreas Schultz, Jeroen Massar, Wez Furlong, Nicolas Barry,
++ * Justin Bradford, Ben Harris, Malcolm Smith, Ahmad Khalifa, Markus
++ * Kuhn, and CORE SDI S.A.
++ *
++ * Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation files
++ * (the "Software"), to deal in the Software without restriction,
++ * including without limitation the rights to use, copy, modify, merge,
++ * publish, distribute, sublicense, and/or sell copies of the Software,
++ * and to permit persons to whom the Software is furnished to do so,
++ * subject to the following conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT.  IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE
++ * FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
++ * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
++ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
++ *
++ */
++#ifdef DWC_CRYPTOLIB
++
++#ifndef CONFIG_MACH_IPMATE
++
++#include "dwc_modpow.h"
++
++#define BIGNUM_INT_MASK  0xFFFFFFFFUL
++#define BIGNUM_TOP_BIT   0x80000000UL
++#define BIGNUM_INT_BITS  32
++
++
++static void *snmalloc(void *mem_ctx, size_t n, size_t size)
++{
++    void *p;
++    size *= n;
++    if (size == 0) size = 1;
++    p = dwc_alloc(mem_ctx, size);
++    return p;
++}
++
++#define snewn(ctx, n, type) ((type *)snmalloc((ctx), (n), sizeof(type)))
++#define sfree dwc_free
++
++/*
++ * Usage notes:
++ *  * Do not call the DIVMOD_WORD macro with expressions such as array
++ *    subscripts, as some implementations object to this (see below).
++ *  * Note that none of the division methods below will cope if the
++ *    quotient won't fit into BIGNUM_INT_BITS. Callers should be careful
++ *    to avoid this case.
++ *    If this condition occurs, in the case of the x86 DIV instruction,
++ *    an overflow exception will occur, which (according to a correspondent)
++ *    will manifest on Windows as something like
++ *      0xC0000095: Integer overflow
++ *    The C variant won't give the right answer, either.
++ */
++
++#define MUL_WORD(w1, w2) ((BignumDblInt)w1 * w2)
++
++#if defined __GNUC__ && defined __i386__
++#define DIVMOD_WORD(q, r, hi, lo, w) \
++    __asm__("div %2" : \
++	    "=d" (r), "=a" (q) : \
++	    "r" (w), "d" (hi), "a" (lo))
++#else
++#define DIVMOD_WORD(q, r, hi, lo, w) do { \
++    BignumDblInt n = (((BignumDblInt)hi) << BIGNUM_INT_BITS) | lo; \
++    q = n / w; \
++    r = n % w; \
++} while (0)
++#endif
++
++//    q = n / w;
++//    r = n % w;
++
++#define BIGNUM_INT_BYTES (BIGNUM_INT_BITS / 8)
++
++#define BIGNUM_INTERNAL
++
++static Bignum newbn(void *mem_ctx, int length)
++{
++    Bignum b = snewn(mem_ctx, length + 1, BignumInt);
++    //if (!b)
++    //abort();		       /* FIXME */
++    DWC_MEMSET(b, 0, (length + 1) * sizeof(*b));
++    b[0] = length;
++    return b;
++}
++
++void freebn(void *mem_ctx, Bignum b)
++{
++    /*
++     * Burn the evidence, just in case.
++     */
++    DWC_MEMSET(b, 0, sizeof(b[0]) * (b[0] + 1));
++    sfree(mem_ctx, b);
++}
++
++/*
++ * Compute c = a * b.
++ * Input is in the first len words of a and b.
++ * Result is returned in the first 2*len words of c.
++ */
++static void internal_mul(BignumInt *a, BignumInt *b,
++			 BignumInt *c, int len)
++{
++    int i, j;
++    BignumDblInt t;
++
++    for (j = 0; j < 2 * len; j++)
++	c[j] = 0;
++
++    for (i = len - 1; i >= 0; i--) {
++	t = 0;
++	for (j = len - 1; j >= 0; j--) {
++	    t += MUL_WORD(a[i], (BignumDblInt) b[j]);
++	    t += (BignumDblInt) c[i + j + 1];
++	    c[i + j + 1] = (BignumInt) t;
++	    t = t >> BIGNUM_INT_BITS;
++	}
++	c[i] = (BignumInt) t;
++    }
++}
++
++static void internal_add_shifted(BignumInt *number,
++				 unsigned n, int shift)
++{
++    int word = 1 + (shift / BIGNUM_INT_BITS);
++    int bshift = shift % BIGNUM_INT_BITS;
++    BignumDblInt addend;
++
++    addend = (BignumDblInt)n << bshift;
++
++    while (addend) {
++	addend += number[word];
++	number[word] = (BignumInt) addend & BIGNUM_INT_MASK;
++	addend >>= BIGNUM_INT_BITS;
++	word++;
++    }
++}
++
++/*
++ * Compute a = a % m.
++ * Input in first alen words of a and first mlen words of m.
++ * Output in first alen words of a
++ * (of which first alen-mlen words will be zero).
++ * The MSW of m MUST have its high bit set.
++ * Quotient is accumulated in the `quotient' array, which is a Bignum
++ * rather than the internal bigendian format. Quotient parts are shifted
++ * left by `qshift' before adding into quot.
++ */
++static void internal_mod(BignumInt *a, int alen,
++			 BignumInt *m, int mlen,
++			 BignumInt *quot, int qshift)
++{
++    BignumInt m0, m1;
++    unsigned int h;
++    int i, k;
++
++    m0 = m[0];
++    if (mlen > 1)
++	m1 = m[1];
++    else
++	m1 = 0;
++
++    for (i = 0; i <= alen - mlen; i++) {
++	BignumDblInt t;
++	unsigned int q, r, c, ai1;
++
++	if (i == 0) {
++	    h = 0;
++	} else {
++	    h = a[i - 1];
++	    a[i - 1] = 0;
++	}
++
++	if (i == alen - 1)
++	    ai1 = 0;
++	else
++	    ai1 = a[i + 1];
++
++	/* Find q = h:a[i] / m0 */
++	if (h >= m0) {
++	    /*
++	     * Special case.
++	     *
++	     * To illustrate it, suppose a BignumInt is 8 bits, and
++	     * we are dividing (say) A1:23:45:67 by A1:B2:C3. Then
++	     * our initial division will be 0xA123 / 0xA1, which
++	     * will give a quotient of 0x100 and a divide overflow.
++	     * However, the invariants in this division algorithm
++	     * are not violated, since the full number A1:23:... is
++	     * _less_ than the quotient prefix A1:B2:... and so the
++	     * following correction loop would have sorted it out.
++	     *
++	     * In this situation we set q to be the largest
++	     * quotient we _can_ stomach (0xFF, of course).
++	     */
++	    q = BIGNUM_INT_MASK;
++	} else {
++	    /* Macro doesn't want an array subscript expression passed
++	     * into it (see definition), so use a temporary. */
++	    BignumInt tmplo = a[i];
++	    DIVMOD_WORD(q, r, h, tmplo, m0);
++
++	    /* Refine our estimate of q by looking at
++	     h:a[i]:a[i+1] / m0:m1 */
++	    t = MUL_WORD(m1, q);
++	    if (t > ((BignumDblInt) r << BIGNUM_INT_BITS) + ai1) {
++		q--;
++		t -= m1;
++		r = (r + m0) & BIGNUM_INT_MASK;     /* overflow? */
++		if (r >= (BignumDblInt) m0 &&
++		    t > ((BignumDblInt) r << BIGNUM_INT_BITS) + ai1) q--;
++	    }
++	}
++
++	/* Subtract q * m from a[i...] */
++	c = 0;
++	for (k = mlen - 1; k >= 0; k--) {
++	    t = MUL_WORD(q, m[k]);
++	    t += c;
++	    c = (unsigned)(t >> BIGNUM_INT_BITS);
++	    if ((BignumInt) t > a[i + k])
++		c++;
++	    a[i + k] -= (BignumInt) t;
++	}
++
++	/* Add back m in case of borrow */
++	if (c != h) {
++	    t = 0;
++	    for (k = mlen - 1; k >= 0; k--) {
++		t += m[k];
++		t += a[i + k];
++		a[i + k] = (BignumInt) t;
++		t = t >> BIGNUM_INT_BITS;
++	    }
++	    q--;
++	}
++	if (quot)
++	    internal_add_shifted(quot, q, qshift + BIGNUM_INT_BITS * (alen - mlen - i));
++    }
++}
++
++/*
++ * Compute p % mod.
++ * The most significant word of mod MUST be non-zero.
++ * We assume that the result array is the same size as the mod array.
++ * We optionally write out a quotient if `quotient' is non-NULL.
++ * We can avoid writing out the result if `result' is NULL.
++ */
++void bigdivmod(void *mem_ctx, Bignum p, Bignum mod, Bignum result, Bignum quotient)
++{
++    BignumInt *n, *m;
++    int mshift;
++    int plen, mlen, i, j;
++
++    /* Allocate m of size mlen, copy mod to m */
++    /* We use big endian internally */
++    mlen = mod[0];
++    m = snewn(mem_ctx, mlen, BignumInt);
++    //if (!m)
++    //abort();		       /* FIXME */
++    for (j = 0; j < mlen; j++)
++	m[j] = mod[mod[0] - j];
++
++    /* Shift m left to make msb bit set */
++    for (mshift = 0; mshift < BIGNUM_INT_BITS-1; mshift++)
++	if ((m[0] << mshift) & BIGNUM_TOP_BIT)
++	    break;
++    if (mshift) {
++	for (i = 0; i < mlen - 1; i++)
++	    m[i] = (m[i] << mshift) | (m[i + 1] >> (BIGNUM_INT_BITS - mshift));
++	m[mlen - 1] = m[mlen - 1] << mshift;
++    }
++
++    plen = p[0];
++    /* Ensure plen > mlen */
++    if (plen <= mlen)
++	plen = mlen + 1;
++
++    /* Allocate n of size plen, copy p to n */
++    n = snewn(mem_ctx, plen, BignumInt);
++    //if (!n)
++    //abort();		       /* FIXME */
++    for (j = 0; j < plen; j++)
++	n[j] = 0;
++    for (j = 1; j <= (int)p[0]; j++)
++	n[plen - j] = p[j];
++
++    /* Main computation */
++    internal_mod(n, plen, m, mlen, quotient, mshift);
++
++    /* Fixup result in case the modulus was shifted */
++    if (mshift) {
++	for (i = plen - mlen - 1; i < plen - 1; i++)
++	    n[i] = (n[i] << mshift) | (n[i + 1] >> (BIGNUM_INT_BITS - mshift));
++	n[plen - 1] = n[plen - 1] << mshift;
++	internal_mod(n, plen, m, mlen, quotient, 0);
++	for (i = plen - 1; i >= plen - mlen; i--)
++	    n[i] = (n[i] >> mshift) | (n[i - 1] << (BIGNUM_INT_BITS - mshift));
++    }
++
++    /* Copy result to buffer */
++    if (result) {
++	for (i = 1; i <= (int)result[0]; i++) {
++	    int j = plen - i;
++	    result[i] = j >= 0 ? n[j] : 0;
++	}
++    }
++
++    /* Free temporary arrays */
++    for (i = 0; i < mlen; i++)
++	m[i] = 0;
++    sfree(mem_ctx, m);
++    for (i = 0; i < plen; i++)
++	n[i] = 0;
++    sfree(mem_ctx, n);
++}
++
++/*
++ * Simple remainder.
++ */
++Bignum bigmod(void *mem_ctx, Bignum a, Bignum b)
++{
++    Bignum r = newbn(mem_ctx, b[0]);
++    bigdivmod(mem_ctx, a, b, r, NULL);
++    return r;
++}
++
++/*
++ * Compute (base ^ exp) % mod.
++ */
++Bignum dwc_modpow(void *mem_ctx, Bignum base_in, Bignum exp, Bignum mod)
++{
++    BignumInt *a, *b, *n, *m;
++    int mshift;
++    int mlen, i, j;
++    Bignum base, result;
++
++    /*
++     * The most significant word of mod needs to be non-zero. It
++     * should already be, but let's make sure.
++     */
++    //assert(mod[mod[0]] != 0);
++
++    /*
++     * Make sure the base is smaller than the modulus, by reducing
++     * it modulo the modulus if not.
++     */
++    base = bigmod(mem_ctx, base_in, mod);
++
++    /* Allocate m of size mlen, copy mod to m */
++    /* We use big endian internally */
++    mlen = mod[0];
++    m = snewn(mem_ctx, mlen, BignumInt);
++    //if (!m)
++    //abort();		       /* FIXME */
++    for (j = 0; j < mlen; j++)
++	m[j] = mod[mod[0] - j];
++
++    /* Shift m left to make msb bit set */
++    for (mshift = 0; mshift < BIGNUM_INT_BITS - 1; mshift++)
++	if ((m[0] << mshift) & BIGNUM_TOP_BIT)
++	    break;
++    if (mshift) {
++	for (i = 0; i < mlen - 1; i++)
++	    m[i] =
++		(m[i] << mshift) | (m[i + 1] >>
++				    (BIGNUM_INT_BITS - mshift));
++	m[mlen - 1] = m[mlen - 1] << mshift;
++    }
++
++    /* Allocate n of size mlen, copy base to n */
++    n = snewn(mem_ctx, mlen, BignumInt);
++    //if (!n)
++    //abort();		       /* FIXME */
++    i = mlen - base[0];
++    for (j = 0; j < i; j++)
++	n[j] = 0;
++    for (j = 0; j < base[0]; j++)
++	n[i + j] = base[base[0] - j];
++
++    /* Allocate a and b of size 2*mlen. Set a = 1 */
++    a = snewn(mem_ctx, 2 * mlen, BignumInt);
++    //if (!a)
++    //abort();		       /* FIXME */
++    b = snewn(mem_ctx, 2 * mlen, BignumInt);
++    //if (!b)
++    //abort();		       /* FIXME */
++    for (i = 0; i < 2 * mlen; i++)
++	a[i] = 0;
++    a[2 * mlen - 1] = 1;
++
++    /* Skip leading zero bits of exp. */
++    i = 0;
++    j = BIGNUM_INT_BITS - 1;
++    while (i < exp[0] && (exp[exp[0] - i] & (1 << j)) == 0) {
++	j--;
++	if (j < 0) {
++	    i++;
++	    j = BIGNUM_INT_BITS - 1;
++	}
++    }
++
++    /* Main computation */
++    while (i < exp[0]) {
++	while (j >= 0) {
++	    internal_mul(a + mlen, a + mlen, b, mlen);
++	    internal_mod(b, mlen * 2, m, mlen, NULL, 0);
++	    if ((exp[exp[0] - i] & (1 << j)) != 0) {
++		internal_mul(b + mlen, n, a, mlen);
++		internal_mod(a, mlen * 2, m, mlen, NULL, 0);
++	    } else {
++		BignumInt *t;
++		t = a;
++		a = b;
++		b = t;
++	    }
++	    j--;
++	}
++	i++;
++	j = BIGNUM_INT_BITS - 1;
++    }
++
++    /* Fixup result in case the modulus was shifted */
++    if (mshift) {
++	for (i = mlen - 1; i < 2 * mlen - 1; i++)
++	    a[i] =
++		(a[i] << mshift) | (a[i + 1] >>
++				    (BIGNUM_INT_BITS - mshift));
++	a[2 * mlen - 1] = a[2 * mlen - 1] << mshift;
++	internal_mod(a, mlen * 2, m, mlen, NULL, 0);
++	for (i = 2 * mlen - 1; i >= mlen; i--)
++	    a[i] =
++		(a[i] >> mshift) | (a[i - 1] <<
++				    (BIGNUM_INT_BITS - mshift));
++    }
++
++    /* Copy result to buffer */
++    result = newbn(mem_ctx, mod[0]);
++    for (i = 0; i < mlen; i++)
++	result[result[0] - i] = a[i + mlen];
++    while (result[0] > 1 && result[result[0]] == 0)
++	result[0]--;
++
++    /* Free temporary arrays */
++    for (i = 0; i < 2 * mlen; i++)
++	a[i] = 0;
++    sfree(mem_ctx, a);
++    for (i = 0; i < 2 * mlen; i++)
++	b[i] = 0;
++    sfree(mem_ctx, b);
++    for (i = 0; i < mlen; i++)
++	m[i] = 0;
++    sfree(mem_ctx, m);
++    for (i = 0; i < mlen; i++)
++	n[i] = 0;
++    sfree(mem_ctx, n);
++
++    freebn(mem_ctx, base);
++
++    return result;
++}
++
++
++#ifdef UNITTEST
++
++static __u32 dh_p[] = {
++	96,
++	0xFFFFFFFF,
++	0xFFFFFFFF,
++	0xA93AD2CA,
++	0x4B82D120,
++	0xE0FD108E,
++	0x43DB5BFC,
++	0x74E5AB31,
++	0x08E24FA0,
++	0xBAD946E2,
++	0x770988C0,
++	0x7A615D6C,
++	0xBBE11757,
++	0x177B200C,
++	0x521F2B18,
++	0x3EC86A64,
++	0xD8760273,
++	0xD98A0864,
++	0xF12FFA06,
++	0x1AD2EE6B,
++	0xCEE3D226,
++	0x4A25619D,
++	0x1E8C94E0,
++	0xDB0933D7,
++	0xABF5AE8C,
++	0xA6E1E4C7,
++	0xB3970F85,
++	0x5D060C7D,
++	0x8AEA7157,
++	0x58DBEF0A,
++	0xECFB8504,
++	0xDF1CBA64,
++	0xA85521AB,
++	0x04507A33,
++	0xAD33170D,
++	0x8AAAC42D,
++	0x15728E5A,
++	0x98FA0510,
++	0x15D22618,
++	0xEA956AE5,
++	0x3995497C,
++	0x95581718,
++	0xDE2BCBF6,
++	0x6F4C52C9,
++	0xB5C55DF0,
++	0xEC07A28F,
++	0x9B2783A2,
++	0x180E8603,
++	0xE39E772C,
++	0x2E36CE3B,
++	0x32905E46,
++	0xCA18217C,
++	0xF1746C08,
++	0x4ABC9804,
++	0x670C354E,
++	0x7096966D,
++	0x9ED52907,
++	0x208552BB,
++	0x1C62F356,
++	0xDCA3AD96,
++	0x83655D23,
++	0xFD24CF5F,
++	0x69163FA8,
++	0x1C55D39A,
++	0x98DA4836,
++	0xA163BF05,
++	0xC2007CB8,
++	0xECE45B3D,
++	0x49286651,
++	0x7C4B1FE6,
++	0xAE9F2411,
++	0x5A899FA5,
++	0xEE386BFB,
++	0xF406B7ED,
++	0x0BFF5CB6,
++	0xA637ED6B,
++	0xF44C42E9,
++	0x625E7EC6,
++	0xE485B576,
++	0x6D51C245,
++	0x4FE1356D,
++	0xF25F1437,
++	0x302B0A6D,
++	0xCD3A431B,
++	0xEF9519B3,
++	0x8E3404DD,
++	0x514A0879,
++	0x3B139B22,
++	0x020BBEA6,
++	0x8A67CC74,
++	0x29024E08,
++	0x80DC1CD1,
++	0xC4C6628B,
++	0x2168C234,
++	0xC90FDAA2,
++	0xFFFFFFFF,
++	0xFFFFFFFF,
++};
++
++static __u32 dh_a[] = {
++	8,
++	0xdf367516,
++	0x86459caa,
++	0xe2d459a4,
++	0xd910dae0,
++	0x8a8b5e37,
++	0x67ab31c6,
++	0xf0b55ea9,
++	0x440051d6,
++};
++
++static __u32 dh_b[] = {
++	8,
++	0xded92656,
++	0xe07a048a,
++	0x6fa452cd,
++	0x2df89d30,
++	0xc75f1b0f,
++	0x8ce3578f,
++	0x7980a324,
++	0x5daec786,
++};
++
++static __u32 dh_g[] = {
++	1,
++	2,
++};
++
++int main(void)
++{
++	int i;
++	__u32 *k;
++	k = dwc_modpow(NULL, dh_g, dh_a, dh_p);
++
++	printf("\n\n");
++	for (i=0; i<k[0]; i++) {
++		__u32 word32 = k[k[0] - i];
++		__u16 l = word32 & 0xffff;
++		__u16 m = (word32 & 0xffff0000) >> 16;
++		printf("%04x %04x ", m, l);
++		if (!((i + 1)%13)) printf("\n");
++	}
++	printf("\n\n");
++
++	if ((k[0] == 0x60) && (k[1] == 0x28e490e5) && (k[0x60] == 0x5a0d3d4e)) {
++		printf("PASS\n\n");
++	}
++	else {
++		printf("FAIL\n\n");
++	}
++
++}
++
++#endif /* UNITTEST */
++
++#endif /* CONFIG_MACH_IPMATE */
++
++#endif /*DWC_CRYPTOLIB */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_modpow.h linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_modpow.h
+--- linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_modpow.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_modpow.h	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,34 @@
++/*
++ * dwc_modpow.h
++ * See dwc_modpow.c for license and changes
++ */
++#ifndef _DWC_MODPOW_H
++#define _DWC_MODPOW_H
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#include "dwc_os.h"
++
++/** @file
++ *
++ * This file defines the module exponentiation function which is only used
++ * internally by the DWC UWB modules for calculation of PKs during numeric
++ * association.  The routine is taken from the PUTTY, an open source terminal
++ * emulator.  The PUTTY License is preserved in the dwc_modpow.c file.
++ *
++ */
++
++typedef uint32_t BignumInt;
++typedef uint64_t BignumDblInt;
++typedef BignumInt *Bignum;
++
++/* Compute modular exponentiaion */
++extern Bignum dwc_modpow(void *mem_ctx, Bignum base_in, Bignum exp, Bignum mod);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _LINUX_BIGNUM_H */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_notifier.c linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_notifier.c
+--- linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_notifier.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_notifier.c	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,319 @@
++#ifdef DWC_NOTIFYLIB
++
++#include "dwc_notifier.h"
++#include "dwc_list.h"
++
++typedef struct dwc_observer {
++	void *observer;
++	dwc_notifier_callback_t callback;
++	void *data;
++	char *notification;
++	DWC_CIRCLEQ_ENTRY(dwc_observer) list_entry;
++} observer_t;
++
++DWC_CIRCLEQ_HEAD(observer_queue, dwc_observer);
++
++typedef struct dwc_notifier {
++	void *mem_ctx;
++	void *object;
++	struct observer_queue observers;
++	DWC_CIRCLEQ_ENTRY(dwc_notifier) list_entry;
++} notifier_t;
++
++DWC_CIRCLEQ_HEAD(notifier_queue, dwc_notifier);
++
++typedef struct manager {
++	void *mem_ctx;
++	void *wkq_ctx;
++	dwc_workq_t *wq;
++//	dwc_mutex_t *mutex;
++	struct notifier_queue notifiers;
++} manager_t;
++
++static manager_t *manager = NULL;
++
++static int create_manager(void *mem_ctx, void *wkq_ctx)
++{
++	manager = dwc_alloc(mem_ctx, sizeof(manager_t));
++	if (!manager) {
++		return -DWC_E_NO_MEMORY;
++	}
++
++	DWC_CIRCLEQ_INIT(&manager->notifiers);
++
++	manager->wq = dwc_workq_alloc(wkq_ctx, "DWC Notification WorkQ");
++	if (!manager->wq) {
++		return -DWC_E_NO_MEMORY;
++	}
++
++	return 0;
++}
++
++static void free_manager(void)
++{
++	dwc_workq_free(manager->wq);
++
++	/* All notifiers must have unregistered themselves before this module
++	 * can be removed.  Hitting this assertion indicates a programmer
++	 * error. */
++	DWC_ASSERT(DWC_CIRCLEQ_EMPTY(&manager->notifiers),
++		   "Notification manager being freed before all notifiers have been removed");
++	dwc_free(manager->mem_ctx, manager);
++}
++
++#ifdef DEBUG
++static void dump_manager(void)
++{
++	notifier_t *n;
++	observer_t *o;
++
++	DWC_ASSERT(manager, "Notification manager not found");
++
++	DWC_DEBUG("List of all notifiers and observers:\n");
++	DWC_CIRCLEQ_FOREACH(n, &manager->notifiers, list_entry) {
++		DWC_DEBUG("Notifier %p has observers:\n", n->object);
++		DWC_CIRCLEQ_FOREACH(o, &n->observers, list_entry) {
++			DWC_DEBUG("    %p watching %s\n", o->observer, o->notification);
++		}
++	}
++}
++#else
++#define dump_manager(...)
++#endif
++
++static observer_t *alloc_observer(void *mem_ctx, void *observer, char *notification,
++				  dwc_notifier_callback_t callback, void *data)
++{
++	observer_t *new_observer = dwc_alloc(mem_ctx, sizeof(observer_t));
++
++	if (!new_observer) {
++		return NULL;
++	}
++
++	DWC_CIRCLEQ_INIT_ENTRY(new_observer, list_entry);
++	new_observer->observer = observer;
++	new_observer->notification = notification;
++	new_observer->callback = callback;
++	new_observer->data = data;
++	return new_observer;
++}
++
++static void free_observer(void *mem_ctx, observer_t *observer)
++{
++	dwc_free(mem_ctx, observer);
++}
++
++static notifier_t *alloc_notifier(void *mem_ctx, void *object)
++{
++	notifier_t *notifier;
++
++	if (!object) {
++		return NULL;
++	}
++
++	notifier = dwc_alloc(mem_ctx, sizeof(notifier_t));
++	if (!notifier) {
++		return NULL;
++	}
++
++	DWC_CIRCLEQ_INIT(&notifier->observers);
++	DWC_CIRCLEQ_INIT_ENTRY(notifier, list_entry);
++
++	notifier->mem_ctx = mem_ctx;
++	notifier->object = object;
++	return notifier;
++}
++
++static void free_notifier(notifier_t *notifier)
++{
++	observer_t *observer;
++
++	DWC_CIRCLEQ_FOREACH(observer, &notifier->observers, list_entry) {
++		free_observer(notifier->mem_ctx, observer);
++	}
++
++	dwc_free(notifier->mem_ctx, notifier);
++}
++
++static notifier_t *find_notifier(void *object)
++{
++	notifier_t *notifier;
++
++	DWC_ASSERT(manager, "Notification manager not found");
++
++	if (!object) {
++		return NULL;
++	}
++
++	DWC_CIRCLEQ_FOREACH(notifier, &manager->notifiers, list_entry) {
++		if (notifier->object == object) {
++			return notifier;
++		}
++	}
++
++	return NULL;
++}
++
++int dwc_alloc_notification_manager(void *mem_ctx, void *wkq_ctx)
++{
++	return create_manager(mem_ctx, wkq_ctx);
++}
++
++void dwc_free_notification_manager(void)
++{
++	free_manager();
++}
++
++dwc_notifier_t *dwc_register_notifier(void *mem_ctx, void *object)
++{
++	notifier_t *notifier;
++
++	DWC_ASSERT(manager, "Notification manager not found");
++
++	notifier = find_notifier(object);
++	if (notifier) {
++		DWC_ERROR("Notifier %p is already registered\n", object);
++		return NULL;
++	}
++
++	notifier = alloc_notifier(mem_ctx, object);
++	if (!notifier) {
++		return NULL;
++	}
++
++	DWC_CIRCLEQ_INSERT_TAIL(&manager->notifiers, notifier, list_entry);
++
++	DWC_INFO("Notifier %p registered", object);
++	dump_manager();
++
++	return notifier;
++}
++
++void dwc_unregister_notifier(dwc_notifier_t *notifier)
++{
++	DWC_ASSERT(manager, "Notification manager not found");
++
++	if (!DWC_CIRCLEQ_EMPTY(&notifier->observers)) {
++		observer_t *o;
++
++		DWC_ERROR("Notifier %p has active observers when removing\n", notifier->object);
++		DWC_CIRCLEQ_FOREACH(o, &notifier->observers, list_entry) {
++			DWC_DEBUGC("    %p watching %s\n", o->observer, o->notification);
++		}
++
++		DWC_ASSERT(DWC_CIRCLEQ_EMPTY(&notifier->observers),
++			   "Notifier %p has active observers when removing", notifier);
++	}
++
++	DWC_CIRCLEQ_REMOVE_INIT(&manager->notifiers, notifier, list_entry);
++	free_notifier(notifier);
++
++	DWC_INFO("Notifier unregistered");
++	dump_manager();
++}
++
++/* Add an observer to observe the notifier for a particular state, event, or notification. */
++int dwc_add_observer(void *observer, void *object, char *notification,
++		     dwc_notifier_callback_t callback, void *data)
++{
++	notifier_t *notifier = find_notifier(object);
++	observer_t *new_observer;
++
++	if (!notifier) {
++		DWC_ERROR("Notifier %p is not found when adding observer\n", object);
++		return -DWC_E_INVALID;
++	}
++
++	new_observer = alloc_observer(notifier->mem_ctx, observer, notification, callback, data);
++	if (!new_observer) {
++		return -DWC_E_NO_MEMORY;
++	}
++
++	DWC_CIRCLEQ_INSERT_TAIL(&notifier->observers, new_observer, list_entry);
++
++	DWC_INFO("Added observer %p to notifier %p observing notification %s, callback=%p, data=%p",
++		 observer, object, notification, callback, data);
++
++	dump_manager();
++	return 0;
++}
++
++int dwc_remove_observer(void *observer)
++{
++	notifier_t *n;
++
++	DWC_ASSERT(manager, "Notification manager not found");
++
++	DWC_CIRCLEQ_FOREACH(n, &manager->notifiers, list_entry) {
++		observer_t *o;
++		observer_t *o2;
++
++		DWC_CIRCLEQ_FOREACH_SAFE(o, o2, &n->observers, list_entry) {
++			if (o->observer == observer) {
++				DWC_CIRCLEQ_REMOVE_INIT(&n->observers, o, list_entry);
++				DWC_INFO("Removing observer %p from notifier %p watching notification %s:",
++					 o->observer, n->object, o->notification);
++				free_observer(n->mem_ctx, o);
++			}
++		}
++	}
++
++	dump_manager();
++	return 0;
++}
++
++typedef struct callback_data {
++	void *mem_ctx;
++	dwc_notifier_callback_t cb;
++	void *observer;
++	void *data;
++	void *object;
++	char *notification;
++	void *notification_data;
++} cb_data_t;
++
++static void cb_task(void *data)
++{
++	cb_data_t *cb = (cb_data_t *)data;
++
++	cb->cb(cb->object, cb->notification, cb->observer, cb->notification_data, cb->data);
++	dwc_free(cb->mem_ctx, cb);
++}
++
++void dwc_notify(dwc_notifier_t *notifier, char *notification, void *notification_data)
++{
++	observer_t *o;
++
++	DWC_ASSERT(manager, "Notification manager not found");
++
++	DWC_CIRCLEQ_FOREACH(o, &notifier->observers, list_entry) {
++		int len = DWC_STRLEN(notification);
++
++		if (DWC_STRLEN(o->notification) != len) {
++			continue;
++		}
++
++		if (DWC_STRNCMP(o->notification, notification, len) == 0) {
++			cb_data_t *cb_data = dwc_alloc(notifier->mem_ctx, sizeof(cb_data_t));
++
++			if (!cb_data) {
++				DWC_ERROR("Failed to allocate callback data\n");
++				return;
++			}
++
++			cb_data->mem_ctx = notifier->mem_ctx;
++			cb_data->cb = o->callback;
++			cb_data->observer = o->observer;
++			cb_data->data = o->data;
++			cb_data->object = notifier->object;
++			cb_data->notification = notification;
++			cb_data->notification_data = notification_data;
++			DWC_DEBUGC("Observer found %p for notification %s\n", o->observer, notification);
++			DWC_WORKQ_SCHEDULE(manager->wq, cb_task, cb_data,
++					   "Notify callback from %p for Notification %s, to observer %p",
++					   cb_data->object, notification, cb_data->observer);
++		}
++	}
++}
++
++#endif	/* DWC_NOTIFYLIB */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_notifier.h linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_notifier.h
+--- linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_notifier.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_notifier.h	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,122 @@
++
++#ifndef __DWC_NOTIFIER_H__
++#define __DWC_NOTIFIER_H__
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#include "dwc_os.h"
++
++/** @file
++ *
++ * A simple implementation of the Observer pattern.  Any "module" can
++ * register as an observer or notifier.  The notion of "module" is abstract and
++ * can mean anything used to identify either an observer or notifier.  Usually
++ * it will be a pointer to a data structure which contains some state, ie an
++ * object.
++ *
++ * Before any notifiers can be added, the global notification manager must be
++ * brought up with dwc_alloc_notification_manager().
++ * dwc_free_notification_manager() will bring it down and free all resources.
++ * These would typically be called upon module load and unload.  The
++ * notification manager is a single global instance that handles all registered
++ * observable modules and observers so this should be done only once.
++ *
++ * A module can be observable by using Notifications to publicize some general
++ * information about it's state or operation.  It does not care who listens, or
++ * even if anyone listens, or what they do with the information.  The observable
++ * modules do not need to know any information about it's observers or their
++ * interface, or their state or data.
++ *
++ * Any module can register to emit Notifications.  It should publish a list of
++ * notifications that it can emit and their behavior, such as when they will get
++ * triggered, and what information will be provided to the observer.  Then it
++ * should register itself as an observable module. See dwc_register_notifier().
++ *
++ * Any module can observe any observable, registered module, provided it has a
++ * handle to the other module and knows what notifications to observe.  See
++ * dwc_add_observer().
++ *
++ * A function of type dwc_notifier_callback_t is called whenever a notification
++ * is triggered with one or more observers observing it.  This function is
++ * called in it's own process so it may sleep or block if needed.  It is
++ * guaranteed to be called sometime after the notification has occurred and will
++ * be called once per each time the notification is triggered.  It will NOT be
++ * called in the same process context used to trigger the notification.
++ *
++ * @section Limitiations
++ *
++ * Keep in mind that Notifications that can be triggered in rapid sucession may
++ * schedule too many processes too handle.  Be aware of this limitation when
++ * designing to use notifications, and only add notifications for appropriate
++ * observable information.
++ *
++ * Also Notification callbacks are not synchronous.  If you need to synchronize
++ * the behavior between module/observer you must use other means.  And perhaps
++ * that will mean Notifications are not the proper solution.
++ */
++
++struct dwc_notifier;
++typedef struct dwc_notifier dwc_notifier_t;
++
++/** The callback function must be of this type.
++ *
++ * @param object This is the object that is being observed.
++ * @param notification This is the notification that was triggered.
++ * @param observer This is the observer
++ * @param notification_data This is notification-specific data that the notifier
++ * has included in this notification.  The value of this should be published in
++ * the documentation of the observable module with the notifications.
++ * @param user_data This is any custom data that the observer provided when
++ * adding itself as an observer to the notification. */
++typedef void (*dwc_notifier_callback_t)(void *object, char *notification, void *observer,
++					void *notification_data, void *user_data);
++
++/** Brings up the notification manager. */
++extern int dwc_alloc_notification_manager(void *mem_ctx, void *wkq_ctx);
++/** Brings down the notification manager. */
++extern void dwc_free_notification_manager(void);
++
++/** This function registers an observable module.  A dwc_notifier_t object is
++ * returned to the observable module.  This is an opaque object that is used by
++ * the observable module to trigger notifications.  This object should only be
++ * accessible to functions that are authorized to trigger notifications for this
++ * module.  Observers do not need this object. */
++extern dwc_notifier_t *dwc_register_notifier(void *mem_ctx, void *object);
++
++/** This function unregisters an observable module.  All observers have to be
++ * removed prior to unregistration. */
++extern void dwc_unregister_notifier(dwc_notifier_t *notifier);
++
++/** Add a module as an observer to the observable module.  The observable module
++ * needs to have previously registered with the notification manager.
++ *
++ * @param observer The observer module
++ * @param object The module to observe
++ * @param notification The notification to observe
++ * @param callback The callback function to call
++ * @param user_data Any additional user data to pass into the callback function */
++extern int dwc_add_observer(void *observer, void *object, char *notification,
++			    dwc_notifier_callback_t callback, void *user_data);
++
++/** Removes the specified observer from all notifications that it is currently
++ * observing. */
++extern int dwc_remove_observer(void *observer);
++
++/** This function triggers a Notification.  It should be called by the
++ * observable module, or any module or library which the observable module
++ * allows to trigger notification on it's behalf.  Such as the dwc_cc_t.
++ *
++ * dwc_notify is a non-blocking function.  Callbacks are scheduled called in
++ * their own process context for each trigger.  Callbacks can be blocking.
++ * dwc_notify can be called from interrupt context if needed.
++ *
++ */
++void dwc_notify(dwc_notifier_t *notifier, char *notification, void *notification_data);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* __DWC_NOTIFIER_H__ */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_os.h linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_os.h
+--- linux-3.12.6/drivers/usb/host/dwc_common_port/dwc_os.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_common_port/dwc_os.h	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,1262 @@
++/* =========================================================================
++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_os.h $
++ * $Revision: #14 $
++ * $Date: 2010/11/04 $
++ * $Change: 1621695 $
++ *
++ * Synopsys Portability Library Software and documentation
++ * (hereinafter, "Software") is an Unsupported proprietary work of
++ * Synopsys, Inc. unless otherwise expressly agreed to in writing
++ * between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product
++ * under any End User Software License Agreement or Agreement for
++ * Licensed Product with Synopsys or any supplement thereto. You are
++ * permitted to use and redistribute this Software in source and binary
++ * forms, with or without modification, provided that redistributions
++ * of source code must retain this notice. You may not view, use,
++ * disclose, copy or distribute this file or any information contained
++ * herein except pursuant to this license grant from Synopsys. If you
++ * do not agree with this notice, including the disclaimer below, then
++ * you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================= */
++#ifndef _DWC_OS_H_
++#define _DWC_OS_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/** @file
++ *
++ * DWC portability library, low level os-wrapper functions
++ *
++ */
++
++/* These basic types need to be defined by some OS header file or custom header
++ * file for your specific target architecture.
++ *
++ * uint8_t, int8_t, uint16_t, int16_t, uint32_t, int32_t, uint64_t, int64_t
++ *
++ * Any custom or alternate header file must be added and enabled here.
++ */
++
++#ifdef DWC_LINUX
++# include <linux/types.h>
++# ifdef CONFIG_DEBUG_MUTEXES
++#  include <linux/mutex.h>
++# endif
++# include <linux/errno.h>
++# include <stdarg.h>
++#endif
++
++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
++# include <os_dep.h>
++#endif
++
++
++/** @name Primitive Types and Values */
++
++/** We define a boolean type for consistency.  Can be either YES or NO */
++typedef uint8_t dwc_bool_t;
++#define YES  1
++#define NO   0
++
++#ifdef DWC_LINUX
++
++/** @name Error Codes */
++#define DWC_E_INVALID		EINVAL
++#define DWC_E_NO_MEMORY		ENOMEM
++#define DWC_E_NO_DEVICE		ENODEV
++#define DWC_E_NOT_SUPPORTED	EOPNOTSUPP
++#define DWC_E_TIMEOUT		ETIMEDOUT
++#define DWC_E_BUSY		EBUSY
++#define DWC_E_AGAIN		EAGAIN
++#define DWC_E_RESTART		ERESTART
++#define DWC_E_ABORT		ECONNABORTED
++#define DWC_E_SHUTDOWN		ESHUTDOWN
++#define DWC_E_NO_DATA		ENODATA
++#define DWC_E_DISCONNECT	ECONNRESET
++#define DWC_E_UNKNOWN		EINVAL
++#define DWC_E_NO_STREAM_RES	ENOSR
++#define DWC_E_COMMUNICATION	ECOMM
++#define DWC_E_OVERFLOW		EOVERFLOW
++#define DWC_E_PROTOCOL		EPROTO
++#define DWC_E_IN_PROGRESS	EINPROGRESS
++#define DWC_E_PIPE		EPIPE
++#define DWC_E_IO		EIO
++#define DWC_E_NO_SPACE		ENOSPC
++
++#else
++
++/** @name Error Codes */
++#define DWC_E_INVALID		1001
++#define DWC_E_NO_MEMORY		1002
++#define DWC_E_NO_DEVICE		1003
++#define DWC_E_NOT_SUPPORTED	1004
++#define DWC_E_TIMEOUT		1005
++#define DWC_E_BUSY		1006
++#define DWC_E_AGAIN		1007
++#define DWC_E_RESTART		1008
++#define DWC_E_ABORT		1009
++#define DWC_E_SHUTDOWN		1010
++#define DWC_E_NO_DATA		1011
++#define DWC_E_DISCONNECT	2000
++#define DWC_E_UNKNOWN		3000
++#define DWC_E_NO_STREAM_RES	4001
++#define DWC_E_COMMUNICATION	4002
++#define DWC_E_OVERFLOW		4003
++#define DWC_E_PROTOCOL		4004
++#define DWC_E_IN_PROGRESS	4005
++#define DWC_E_PIPE		4006
++#define DWC_E_IO		4007
++#define DWC_E_NO_SPACE		4008
++
++#endif
++
++
++/** @name Tracing/Logging Functions
++ *
++ * These function provide the capability to add tracing, debugging, and error
++ * messages, as well exceptions as assertions.  The WUDEV uses these
++ * extensively.  These could be logged to the main console, the serial port, an
++ * internal buffer, etc.  These functions could also be no-op if they are too
++ * expensive on your system.  By default undefining the DEBUG macro already
++ * no-ops some of these functions. */
++
++/** Returns non-zero if in interrupt context. */
++extern dwc_bool_t DWC_IN_IRQ(void);
++#define dwc_in_irq DWC_IN_IRQ
++
++/** Returns "IRQ" if DWC_IN_IRQ is true. */
++static inline char *dwc_irq(void) {
++	return DWC_IN_IRQ() ? "IRQ" : "";
++}
++
++/** Returns non-zero if in bottom-half context. */
++extern dwc_bool_t DWC_IN_BH(void);
++#define dwc_in_bh DWC_IN_BH
++
++/** Returns "BH" if DWC_IN_BH is true. */
++static inline char *dwc_bh(void) {
++	return DWC_IN_BH() ? "BH" : "";
++}
++
++/**
++ * A vprintf() clone.  Just call vprintf if you've got it.
++ */
++extern void DWC_VPRINTF(char *format, va_list args);
++#define dwc_vprintf DWC_VPRINTF
++
++/**
++ * A vsnprintf() clone.  Just call vprintf if you've got it.
++ */
++extern int DWC_VSNPRINTF(char *str, int size, char *format, va_list args);
++#define dwc_vsnprintf DWC_VSNPRINTF
++
++/**
++ * printf() clone.  Just call printf if you've go it.
++ */
++extern void DWC_PRINTF(char *format, ...)
++/* This provides compiler level static checking of the parameters if you're
++ * using GCC. */
++#ifdef __GNUC__
++	__attribute__ ((format(printf, 1, 2)));
++#else
++	;
++#endif
++#define dwc_printf DWC_PRINTF
++
++/**
++ * sprintf() clone.  Just call sprintf if you've got it.
++ */
++extern int DWC_SPRINTF(char *string, char *format, ...)
++#ifdef __GNUC__
++	__attribute__ ((format(printf, 2, 3)));
++#else
++	;
++#endif
++#define dwc_sprintf DWC_SPRINTF
++
++/**
++ * snprintf() clone.  Just call snprintf if you've got it.
++ */
++extern int DWC_SNPRINTF(char *string, int size, char *format, ...)
++#ifdef __GNUC__
++	__attribute__ ((format(printf, 3, 4)));
++#else
++	;
++#endif
++#define dwc_snprintf DWC_SNPRINTF
++
++/**
++ * Prints a WARNING message.  On systems that don't differentiate between
++ * warnings and regular log messages, just print it.  Indicates that something
++ * may be wrong with the driver.  Works like printf().
++ *
++ * Use the DWC_WARN macro to call this function.
++ */
++extern void __DWC_WARN(char *format, ...)
++#ifdef __GNUC__
++	__attribute__ ((format(printf, 1, 2)));
++#else
++	;
++#endif
++
++/**
++ * Prints an error message.  On systems that don't differentiate between errors
++ * and regular log messages, just print it.  Indicates that something went wrong
++ * with the driver.  Works like printf().
++ *
++ * Use the DWC_ERROR macro to call this function.
++ */
++extern void __DWC_ERROR(char *format, ...)
++#ifdef __GNUC__
++	__attribute__ ((format(printf, 1, 2)));
++#else
++	;
++#endif
++
++/**
++ * Prints an exception error message and takes some user-defined action such as
++ * print out a backtrace or trigger a breakpoint.  Indicates that something went
++ * abnormally wrong with the driver such as programmer error, or other
++ * exceptional condition.  It should not be ignored so even on systems without
++ * printing capability, some action should be taken to notify the developer of
++ * it.  Works like printf().
++ */
++extern void DWC_EXCEPTION(char *format, ...)
++#ifdef __GNUC__
++	__attribute__ ((format(printf, 1, 2)));
++#else
++	;
++#endif
++#define dwc_exception DWC_EXCEPTION
++
++#ifndef DWC_OTG_DEBUG_LEV
++#define DWC_OTG_DEBUG_LEV 0
++#endif
++
++#ifdef DEBUG
++/**
++ * Prints out a debug message.  Used for logging/trace messages.
++ *
++ * Use the DWC_DEBUG macro to call this function
++ */
++extern void __DWC_DEBUG(char *format, ...)
++#ifdef __GNUC__
++	__attribute__ ((format(printf, 1, 2)));
++#else
++	;
++#endif
++#else
++#define __DWC_DEBUG printk
++#endif
++
++/**
++ * Prints out a Debug message.
++ */
++#define DWC_DEBUG(_format, _args...) __DWC_DEBUG("DEBUG:%s:%s: " _format "\n", \
++						 __func__, dwc_irq(), ## _args)
++#define dwc_debug DWC_DEBUG
++/**
++ * Prints out a Debug message if enabled at compile time.
++ */
++#if DWC_OTG_DEBUG_LEV > 0
++#define DWC_DEBUGC(_format, _args...) DWC_DEBUG(_format, ##_args )
++#else
++#define DWC_DEBUGC(_format, _args...)
++#endif
++#define dwc_debugc DWC_DEBUGC
++/**
++ * Prints out an informative message.
++ */
++#define DWC_INFO(_format, _args...) DWC_PRINTF("INFO:%s: " _format "\n", \
++					       dwc_irq(), ## _args)
++#define dwc_info DWC_INFO
++/**
++ * Prints out an informative message if enabled at compile time.
++ */
++#if DWC_OTG_DEBUG_LEV > 1
++#define DWC_INFOC(_format, _args...) DWC_INFO(_format, ##_args )
++#else
++#define DWC_INFOC(_format, _args...)
++#endif
++#define dwc_infoc DWC_INFOC
++/**
++ * Prints out a warning message.
++ */
++#define DWC_WARN(_format, _args...) __DWC_WARN("WARN:%s:%s:%d: " _format "\n", \
++					dwc_irq(), __func__, __LINE__, ## _args)
++#define dwc_warn DWC_WARN
++/**
++ * Prints out an error message.
++ */
++#define DWC_ERROR(_format, _args...) __DWC_ERROR("ERROR:%s:%s:%d: " _format "\n", \
++					dwc_irq(), __func__, __LINE__, ## _args)
++#define dwc_error DWC_ERROR
++
++#define DWC_PROTO_ERROR(_format, _args...) __DWC_WARN("ERROR:%s:%s:%d: " _format "\n", \
++						dwc_irq(), __func__, __LINE__, ## _args)
++#define dwc_proto_error DWC_PROTO_ERROR
++
++#ifdef DEBUG
++/** Prints out a exception error message if the _expr expression fails.  Disabled
++ * if DEBUG is not enabled. */
++#define DWC_ASSERT(_expr, _format, _args...) do { \
++	if (!(_expr)) { DWC_EXCEPTION("%s:%s:%d: " _format "\n", dwc_irq(), \
++				      __FILE__, __LINE__, ## _args); } \
++	} while (0)
++#else
++#define DWC_ASSERT(_x...)
++#endif
++#define dwc_assert DWC_ASSERT
++
++
++/** @name Byte Ordering
++ * The following functions are for conversions between processor's byte ordering
++ * and specific ordering you want.
++ */
++
++/** Converts 32 bit data in CPU byte ordering to little endian. */
++extern uint32_t DWC_CPU_TO_LE32(uint32_t *p);
++#define dwc_cpu_to_le32 DWC_CPU_TO_LE32
++
++/** Converts 32 bit data in CPU byte orderint to big endian. */
++extern uint32_t DWC_CPU_TO_BE32(uint32_t *p);
++#define dwc_cpu_to_be32 DWC_CPU_TO_BE32
++
++/** Converts 32 bit little endian data to CPU byte ordering. */
++extern uint32_t DWC_LE32_TO_CPU(uint32_t *p);
++#define dwc_le32_to_cpu DWC_LE32_TO_CPU
++
++/** Converts 32 bit big endian data to CPU byte ordering. */
++extern uint32_t DWC_BE32_TO_CPU(uint32_t *p);
++#define dwc_be32_to_cpu DWC_BE32_TO_CPU
++
++/** Converts 16 bit data in CPU byte ordering to little endian. */
++extern uint16_t DWC_CPU_TO_LE16(uint16_t *p);
++#define dwc_cpu_to_le16 DWC_CPU_TO_LE16
++
++/** Converts 16 bit data in CPU byte orderint to big endian. */
++extern uint16_t DWC_CPU_TO_BE16(uint16_t *p);
++#define dwc_cpu_to_be16 DWC_CPU_TO_BE16
++
++/** Converts 16 bit little endian data to CPU byte ordering. */
++extern uint16_t DWC_LE16_TO_CPU(uint16_t *p);
++#define dwc_le16_to_cpu DWC_LE16_TO_CPU
++
++/** Converts 16 bit bi endian data to CPU byte ordering. */
++extern uint16_t DWC_BE16_TO_CPU(uint16_t *p);
++#define dwc_be16_to_cpu DWC_BE16_TO_CPU
++
++
++/** @name Register Read/Write
++ *
++ * The following six functions should be implemented to read/write registers of
++ * 32-bit and 64-bit sizes.  All modules use this to read/write register values.
++ * The reg value is a pointer to the register calculated from the void *base
++ * variable passed into the driver when it is started.  */
++
++#ifdef DWC_LINUX
++/* Linux doesn't need any extra parameters for register read/write, so we
++ * just throw away the IO context parameter.
++ */
++/** Reads the content of a 32-bit register. */
++extern uint32_t DWC_READ_REG32(uint32_t volatile *reg);
++#define dwc_read_reg32(_ctx_,_reg_) DWC_READ_REG32(_reg_)
++
++/** Reads the content of a 64-bit register. */
++extern uint64_t DWC_READ_REG64(uint64_t volatile *reg);
++#define dwc_read_reg64(_ctx_,_reg_) DWC_READ_REG64(_reg_)
++
++/** Writes to a 32-bit register. */
++extern void DWC_WRITE_REG32(uint32_t volatile *reg, uint32_t value);
++#define dwc_write_reg32(_ctx_,_reg_,_val_) DWC_WRITE_REG32(_reg_, _val_)
++
++/** Writes to a 64-bit register. */
++extern void DWC_WRITE_REG64(uint64_t volatile *reg, uint64_t value);
++#define dwc_write_reg64(_ctx_,_reg_,_val_) DWC_WRITE_REG64(_reg_, _val_)
++
++/**
++ * Modify bit values in a register.  Using the
++ * algorithm: (reg_contents & ~clear_mask) | set_mask.
++ */
++extern void DWC_MODIFY_REG32(uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask);
++#define dwc_modify_reg32(_ctx_,_reg_,_cmsk_,_smsk_) DWC_MODIFY_REG32(_reg_,_cmsk_,_smsk_)
++extern void DWC_MODIFY_REG64(uint64_t volatile *reg, uint64_t clear_mask, uint64_t set_mask);
++#define dwc_modify_reg64(_ctx_,_reg_,_cmsk_,_smsk_) DWC_MODIFY_REG64(_reg_,_cmsk_,_smsk_)
++
++#endif	/* DWC_LINUX */
++
++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
++typedef struct dwc_ioctx {
++	struct device *dev;
++	bus_space_tag_t iot;
++	bus_space_handle_t ioh;
++} dwc_ioctx_t;
++
++/** BSD needs two extra parameters for register read/write, so we pass
++ * them in using the IO context parameter.
++ */
++/** Reads the content of a 32-bit register. */
++extern uint32_t DWC_READ_REG32(void *io_ctx, uint32_t volatile *reg);
++#define dwc_read_reg32 DWC_READ_REG32
++
++/** Reads the content of a 64-bit register. */
++extern uint64_t DWC_READ_REG64(void *io_ctx, uint64_t volatile *reg);
++#define dwc_read_reg64 DWC_READ_REG64
++
++/** Writes to a 32-bit register. */
++extern void DWC_WRITE_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t value);
++#define dwc_write_reg32 DWC_WRITE_REG32
++
++/** Writes to a 64-bit register. */
++extern void DWC_WRITE_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t value);
++#define dwc_write_reg64 DWC_WRITE_REG64
++
++/**
++ * Modify bit values in a register.  Using the
++ * algorithm: (reg_contents & ~clear_mask) | set_mask.
++ */
++extern void DWC_MODIFY_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask);
++#define dwc_modify_reg32 DWC_MODIFY_REG32
++extern void DWC_MODIFY_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t clear_mask, uint64_t set_mask);
++#define dwc_modify_reg64 DWC_MODIFY_REG64
++
++#endif	/* DWC_FREEBSD || DWC_NETBSD */
++
++/** @cond */
++
++/** @name Some convenience MACROS used internally.  Define DWC_DEBUG_REGS to log the
++ * register writes. */
++
++#ifdef DWC_LINUX
++
++# ifdef DWC_DEBUG_REGS
++
++#define dwc_define_read_write_reg_n(_reg,_container_type) \
++static inline uint32_t dwc_read_##_reg##_n(_container_type *container, int num) { \
++	return DWC_READ_REG32(&container->regs->_reg[num]); \
++} \
++static inline void dwc_write_##_reg##_n(_container_type *container, int num, uint32_t data) { \
++	DWC_DEBUG("WRITING %8s[%d]: %p: %08x", #_reg, num, \
++		  &(((uint32_t*)container->regs->_reg)[num]), data); \
++	DWC_WRITE_REG32(&(((uint32_t*)container->regs->_reg)[num]), data); \
++}
++
++#define dwc_define_read_write_reg(_reg,_container_type) \
++static inline uint32_t dwc_read_##_reg(_container_type *container) { \
++	return DWC_READ_REG32(&container->regs->_reg); \
++} \
++static inline void dwc_write_##_reg(_container_type *container, uint32_t data) { \
++	DWC_DEBUG("WRITING %11s: %p: %08x", #_reg, &container->regs->_reg, data); \
++	DWC_WRITE_REG32(&container->regs->_reg, data); \
++}
++
++# else	/* DWC_DEBUG_REGS */
++
++#define dwc_define_read_write_reg_n(_reg,_container_type) \
++static inline uint32_t dwc_read_##_reg##_n(_container_type *container, int num) { \
++	return DWC_READ_REG32(&container->regs->_reg[num]); \
++} \
++static inline void dwc_write_##_reg##_n(_container_type *container, int num, uint32_t data) { \
++	DWC_WRITE_REG32(&(((uint32_t*)container->regs->_reg)[num]), data); \
++}
++
++#define dwc_define_read_write_reg(_reg,_container_type) \
++static inline uint32_t dwc_read_##_reg(_container_type *container) { \
++	return DWC_READ_REG32(&container->regs->_reg); \
++} \
++static inline void dwc_write_##_reg(_container_type *container, uint32_t data) { \
++	DWC_WRITE_REG32(&container->regs->_reg, data); \
++}
++
++# endif	/* DWC_DEBUG_REGS */
++
++#endif	/* DWC_LINUX */
++
++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
++
++# ifdef DWC_DEBUG_REGS
++
++#define dwc_define_read_write_reg_n(_reg,_container_type) \
++static inline uint32_t dwc_read_##_reg##_n(void *io_ctx, _container_type *container, int num) { \
++	return DWC_READ_REG32(io_ctx, &container->regs->_reg[num]); \
++} \
++static inline void dwc_write_##_reg##_n(void *io_ctx, _container_type *container, int num, uint32_t data) { \
++	DWC_DEBUG("WRITING %8s[%d]: %p: %08x", #_reg, num, \
++		  &(((uint32_t*)container->regs->_reg)[num]), data); \
++	DWC_WRITE_REG32(io_ctx, &(((uint32_t*)container->regs->_reg)[num]), data); \
++}
++
++#define dwc_define_read_write_reg(_reg,_container_type) \
++static inline uint32_t dwc_read_##_reg(void *io_ctx, _container_type *container) { \
++	return DWC_READ_REG32(io_ctx, &container->regs->_reg); \
++} \
++static inline void dwc_write_##_reg(void *io_ctx, _container_type *container, uint32_t data) { \
++	DWC_DEBUG("WRITING %11s: %p: %08x", #_reg, &container->regs->_reg, data); \
++	DWC_WRITE_REG32(io_ctx, &container->regs->_reg, data); \
++}
++
++# else	/* DWC_DEBUG_REGS */
++
++#define dwc_define_read_write_reg_n(_reg,_container_type) \
++static inline uint32_t dwc_read_##_reg##_n(void *io_ctx, _container_type *container, int num) { \
++	return DWC_READ_REG32(io_ctx, &container->regs->_reg[num]); \
++} \
++static inline void dwc_write_##_reg##_n(void *io_ctx, _container_type *container, int num, uint32_t data) { \
++	DWC_WRITE_REG32(io_ctx, &(((uint32_t*)container->regs->_reg)[num]), data); \
++}
++
++#define dwc_define_read_write_reg(_reg,_container_type) \
++static inline uint32_t dwc_read_##_reg(void *io_ctx, _container_type *container) { \
++	return DWC_READ_REG32(io_ctx, &container->regs->_reg); \
++} \
++static inline void dwc_write_##_reg(void *io_ctx, _container_type *container, uint32_t data) { \
++	DWC_WRITE_REG32(io_ctx, &container->regs->_reg, data); \
++}
++
++# endif	/* DWC_DEBUG_REGS */
++
++#endif	/* DWC_FREEBSD || DWC_NETBSD */
++
++/** @endcond */
++
++
++#ifdef DWC_CRYPTOLIB
++/** @name Crypto Functions
++ *
++ * These are the low-level cryptographic functions used by the driver. */
++
++/** Perform AES CBC */
++extern int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out);
++#define dwc_aes_cbc DWC_AES_CBC
++
++/** Fill the provided buffer with random bytes.  These should be cryptographic grade random numbers. */
++extern void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length);
++#define dwc_random_bytes DWC_RANDOM_BYTES
++
++/** Perform the SHA-256 hash function */
++extern int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out);
++#define dwc_sha256 DWC_SHA256
++
++/** Calculated the HMAC-SHA256 */
++extern int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t *out);
++#define dwc_hmac_sha256 DWC_HMAC_SHA256
++
++#endif	/* DWC_CRYPTOLIB */
++
++
++/** @name Memory Allocation
++ *
++ * These function provide access to memory allocation.  There are only 2 DMA
++ * functions and 3 Regular memory functions that need to be implemented.  None
++ * of the memory debugging routines need to be implemented.  The allocation
++ * routines all ZERO the contents of the memory.
++ *
++ * Defining DWC_DEBUG_MEMORY turns on memory debugging and statistic gathering.
++ * This checks for memory leaks, keeping track of alloc/free pairs.  It also
++ * keeps track of how much memory the driver is using at any given time. */
++
++#define DWC_PAGE_SIZE 4096
++#define DWC_PAGE_OFFSET(addr) (((uint32_t)addr) & 0xfff)
++#define DWC_PAGE_ALIGNED(addr) ((((uint32_t)addr) & 0xfff) == 0)
++
++#define DWC_INVALID_DMA_ADDR 0x0
++
++#ifdef DWC_LINUX
++/** Type for a DMA address */
++typedef dma_addr_t dwc_dma_t;
++#endif
++
++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
++typedef bus_addr_t dwc_dma_t;
++#endif
++
++#ifdef DWC_FREEBSD
++typedef struct dwc_dmactx {
++	struct device *dev;
++	bus_dma_tag_t dma_tag;
++	bus_dmamap_t dma_map;
++	bus_addr_t dma_paddr;
++	void *dma_vaddr;
++} dwc_dmactx_t;
++#endif
++
++#ifdef DWC_NETBSD
++typedef struct dwc_dmactx {
++	struct device *dev;
++	bus_dma_tag_t dma_tag;
++	bus_dmamap_t dma_map;
++	bus_dma_segment_t segs[1];
++	int nsegs;
++	bus_addr_t dma_paddr;
++	void *dma_vaddr;
++} dwc_dmactx_t;
++#endif
++
++/* @todo these functions will be added in the future */
++#if 0
++/**
++ * Creates a DMA pool from which you can allocate DMA buffers.  Buffers
++ * allocated from this pool will be guaranteed to meet the size, alignment, and
++ * boundary requirements specified.
++ *
++ * @param[in] size Specifies the size of the buffers that will be allocated from
++ * this pool.
++ * @param[in] align Specifies the byte alignment requirements of the buffers
++ * allocated from this pool.  Must be a power of 2.
++ * @param[in] boundary Specifies the N-byte boundary that buffers allocated from
++ * this pool must not cross.
++ *
++ * @returns A pointer to an internal opaque structure which is not to be
++ * accessed outside of these library functions.  Use this handle to specify
++ * which pools to allocate/free DMA buffers from and also to destroy the pool,
++ * when you are done with it.
++ */
++extern dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size, uint32_t align, uint32_t boundary);
++
++/**
++ * Destroy a DMA pool.  All buffers allocated from that pool must be freed first.
++ */
++extern void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool);
++
++/**
++ * Allocate a buffer from the specified DMA pool and zeros its contents.
++ */
++extern void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr);
++
++/**
++ * Free a previously allocated buffer from the DMA pool.
++ */
++extern void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr);
++#endif
++
++/** Allocates a DMA capable buffer and zeroes its contents. */
++extern void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr);
++
++/** Allocates a DMA capable buffer and zeroes its contents in atomic contest */
++extern void *__DWC_DMA_ALLOC_ATOMIC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr);
++
++/** Frees a previously allocated buffer. */
++extern void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr);
++
++/** Allocates a block of memory and zeroes its contents. */
++extern void *__DWC_ALLOC(void *mem_ctx, uint32_t size);
++
++/** Allocates a block of memory and zeroes its contents, in an atomic manner
++ * which can be used inside interrupt context.  The size should be sufficiently
++ * small, a few KB at most, such that failures are not likely to occur.  Can just call
++ * __DWC_ALLOC if it is atomic. */
++extern void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size);
++
++/** Frees a previously allocated buffer. */
++extern void __DWC_FREE(void *mem_ctx, void *addr);
++
++#ifndef DWC_DEBUG_MEMORY
++
++#define DWC_ALLOC(_size_) __DWC_ALLOC(NULL, _size_)
++#define DWC_ALLOC_ATOMIC(_size_) __DWC_ALLOC_ATOMIC(NULL, _size_)
++#define DWC_FREE(_addr_) __DWC_FREE(NULL, _addr_)
++
++# ifdef DWC_LINUX
++#define DWC_DMA_ALLOC(_size_,_dma_) __DWC_DMA_ALLOC(NULL, _size_, _dma_)
++#define DWC_DMA_ALLOC_ATOMIC(_size_,_dma_) __DWC_DMA_ALLOC_ATOMIC(NULL, _size_,_dma_)
++#define DWC_DMA_FREE(_size_,_virt_,_dma_) __DWC_DMA_FREE(NULL, _size_, _virt_, _dma_)
++# endif
++
++# if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
++#define DWC_DMA_ALLOC __DWC_DMA_ALLOC
++#define DWC_DMA_FREE __DWC_DMA_FREE
++# endif
++extern void *dwc_dma_alloc_atomic_debug(uint32_t size, dwc_dma_t *dma_addr, char const *func, int line);
++
++#else	/* DWC_DEBUG_MEMORY */
++
++extern void *dwc_alloc_debug(void *mem_ctx, uint32_t size, char const *func, int line);
++extern void *dwc_alloc_atomic_debug(void *mem_ctx, uint32_t size, char const *func, int line);
++extern void dwc_free_debug(void *mem_ctx, void *addr, char const *func, int line);
++extern void *dwc_dma_alloc_debug(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr,
++				 char const *func, int line);
++extern void *dwc_dma_alloc_atomic_debug(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr,
++				char const *func, int line);
++extern void dwc_dma_free_debug(void *dma_ctx, uint32_t size, void *virt_addr,
++			       dwc_dma_t dma_addr, char const *func, int line);
++
++extern int dwc_memory_debug_start(void *mem_ctx);
++extern void dwc_memory_debug_stop(void);
++extern void dwc_memory_debug_report(void);
++
++#define DWC_ALLOC(_size_) dwc_alloc_debug(NULL, _size_, __func__, __LINE__)
++#define DWC_ALLOC_ATOMIC(_size_) dwc_alloc_atomic_debug(NULL, _size_, \
++							__func__, __LINE__)
++#define DWC_FREE(_addr_) dwc_free_debug(NULL, _addr_, __func__, __LINE__)
++
++# ifdef DWC_LINUX
++#define DWC_DMA_ALLOC(_size_,_dma_) dwc_dma_alloc_debug(NULL, _size_, \
++						_dma_, __func__, __LINE__)
++#define DWC_DMA_ALLOC_ATOMIC(_size_,_dma_) dwc_dma_alloc_atomic_debug(NULL, _size_, \
++						_dma_, __func__, __LINE__)
++#define DWC_DMA_FREE(_size_,_virt_,_dma_) dwc_dma_free_debug(NULL, _size_, \
++						_virt_, _dma_, __func__, __LINE__)
++# endif
++
++# if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
++#define DWC_DMA_ALLOC(_ctx_,_size_,_dma_) dwc_dma_alloc_debug(_ctx_, _size_, \
++						_dma_, __func__, __LINE__)
++#define DWC_DMA_FREE(_ctx_,_size_,_virt_,_dma_) dwc_dma_free_debug(_ctx_, _size_, \
++						 _virt_, _dma_, __func__, __LINE__)
++# endif
++
++#endif /* DWC_DEBUG_MEMORY */
++
++#define dwc_alloc(_ctx_,_size_) DWC_ALLOC(_size_)
++#define dwc_alloc_atomic(_ctx_,_size_) DWC_ALLOC_ATOMIC(_size_)
++#define dwc_free(_ctx_,_addr_) DWC_FREE(_addr_)
++
++#ifdef DWC_LINUX
++/* Linux doesn't need any extra parameters for DMA buffer allocation, so we
++ * just throw away the DMA context parameter.
++ */
++#define dwc_dma_alloc(_ctx_,_size_,_dma_) DWC_DMA_ALLOC(_size_, _dma_)
++#define dwc_dma_alloc_atomic(_ctx_,_size_,_dma_) DWC_DMA_ALLOC_ATOMIC(_size_, _dma_)
++#define dwc_dma_free(_ctx_,_size_,_virt_,_dma_) DWC_DMA_FREE(_size_, _virt_, _dma_)
++#endif
++
++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
++/** BSD needs several extra parameters for DMA buffer allocation, so we pass
++ * them in using the DMA context parameter.
++ */
++#define dwc_dma_alloc DWC_DMA_ALLOC
++#define dwc_dma_free DWC_DMA_FREE
++#endif
++
++
++/** @name Memory and String Processing */
++
++/** memset() clone */
++extern void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size);
++#define dwc_memset DWC_MEMSET
++
++/** memcpy() clone */
++extern void *DWC_MEMCPY(void *dest, void const *src, uint32_t size);
++#define dwc_memcpy DWC_MEMCPY
++
++/** memmove() clone */
++extern void *DWC_MEMMOVE(void *dest, void *src, uint32_t size);
++#define dwc_memmove DWC_MEMMOVE
++
++/** memcmp() clone */
++extern int DWC_MEMCMP(void *m1, void *m2, uint32_t size);
++#define dwc_memcmp DWC_MEMCMP
++
++/** strcmp() clone */
++extern int DWC_STRCMP(void *s1, void *s2);
++#define dwc_strcmp DWC_STRCMP
++
++/** strncmp() clone */
++extern int DWC_STRNCMP(void *s1, void *s2, uint32_t size);
++#define dwc_strncmp DWC_STRNCMP
++
++/** strlen() clone, for NULL terminated ASCII strings */
++extern int DWC_STRLEN(char const *str);
++#define dwc_strlen DWC_STRLEN
++
++/** strcpy() clone, for NULL terminated ASCII strings */
++extern char *DWC_STRCPY(char *to, const char *from);
++#define dwc_strcpy DWC_STRCPY
++
++/** strdup() clone.  If you wish to use memory allocation debugging, this
++ * implementation of strdup should use the DWC_* memory routines instead of
++ * calling a predefined strdup.  Otherwise the memory allocated by this routine
++ * will not be seen by the debugging routines. */
++extern char *DWC_STRDUP(char const *str);
++#define dwc_strdup(_ctx_,_str_) DWC_STRDUP(_str_)
++
++/** NOT an atoi() clone.  Read the description carefully.  Returns an integer
++ * converted from the string str in base 10 unless the string begins with a "0x"
++ * in which case it is base 16.  String must be a NULL terminated sequence of
++ * ASCII characters and may optionally begin with whitespace, a + or -, and a
++ * "0x" prefix if base 16.  The remaining characters must be valid digits for
++ * the number and end with a NULL character.  If any invalid characters are
++ * encountered or it returns with a negative error code and the results of the
++ * conversion are undefined.  On sucess it returns 0.  Overflow conditions are
++ * undefined.  An example implementation using atoi() can be referenced from the
++ * Linux implementation. */
++extern int DWC_ATOI(const char *str, int32_t *value);
++#define dwc_atoi DWC_ATOI
++
++/** Same as above but for unsigned. */
++extern int DWC_ATOUI(const char *str, uint32_t *value);
++#define dwc_atoui DWC_ATOUI
++
++#ifdef DWC_UTFLIB
++/** This routine returns a UTF16LE unicode encoded string from a UTF8 string. */
++extern int DWC_UTF8_TO_UTF16LE(uint8_t const *utf8string, uint16_t *utf16string, unsigned len);
++#define dwc_utf8_to_utf16le DWC_UTF8_TO_UTF16LE
++#endif
++
++
++/** @name Wait queues
++ *
++ * Wait queues provide a means of synchronizing between threads or processes.  A
++ * process can block on a waitq if some condition is not true, waiting for it to
++ * become true.  When the waitq is triggered all waiting process will get
++ * unblocked and the condition will be check again.  Waitqs should be triggered
++ * every time a condition can potentially change.*/
++struct dwc_waitq;
++
++/** Type for a waitq */
++typedef struct dwc_waitq dwc_waitq_t;
++
++/** The type of waitq condition callback function.  This is called every time
++ * condition is evaluated. */
++typedef int (*dwc_waitq_condition_t)(void *data);
++
++/** Allocate a waitq */
++extern dwc_waitq_t *DWC_WAITQ_ALLOC(void);
++#define dwc_waitq_alloc(_ctx_) DWC_WAITQ_ALLOC()
++
++/** Free a waitq */
++extern void DWC_WAITQ_FREE(dwc_waitq_t *wq);
++#define dwc_waitq_free DWC_WAITQ_FREE
++
++/** Check the condition and if it is false, block on the waitq.  When unblocked, check the
++ * condition again.  The function returns when the condition becomes true.  The return value
++ * is 0 on condition true, DWC_WAITQ_ABORTED on abort or killed, or DWC_WAITQ_UNKNOWN on error. */
++extern int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data);
++#define dwc_waitq_wait DWC_WAITQ_WAIT
++
++/** Check the condition and if it is false, block on the waitq.  When unblocked,
++ * check the condition again.  The function returns when the condition become
++ * true or the timeout has passed.  The return value is 0 on condition true or
++ * DWC_TIMED_OUT on timeout, or DWC_WAITQ_ABORTED, or DWC_WAITQ_UNKNOWN on
++ * error. */
++extern int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond,
++				      void *data, int32_t msecs);
++#define dwc_waitq_wait_timeout DWC_WAITQ_WAIT_TIMEOUT
++
++/** Trigger a waitq, unblocking all processes.  This should be called whenever a condition
++ * has potentially changed. */
++extern void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq);
++#define dwc_waitq_trigger DWC_WAITQ_TRIGGER
++
++/** Unblock all processes waiting on the waitq with an ABORTED result. */
++extern void DWC_WAITQ_ABORT(dwc_waitq_t *wq);
++#define dwc_waitq_abort DWC_WAITQ_ABORT
++
++
++/** @name Threads
++ *
++ * A thread must be explicitly stopped.  It must check DWC_THREAD_SHOULD_STOP
++ * whenever it is woken up, and then return.  The DWC_THREAD_STOP function
++ * returns the value from the thread.
++ */
++
++struct dwc_thread;
++
++/** Type for a thread */
++typedef struct dwc_thread dwc_thread_t;
++
++/** The thread function */
++typedef int (*dwc_thread_function_t)(void *data);
++
++/** Create a thread and start it running the thread_function.  Returns a handle
++ * to the thread */
++extern dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data);
++#define dwc_thread_run(_ctx_,_func_,_name_,_data_) DWC_THREAD_RUN(_func_, _name_, _data_)
++
++/** Stops a thread.  Return the value returned by the thread.  Or will return
++ * DWC_ABORT if the thread never started. */
++extern int DWC_THREAD_STOP(dwc_thread_t *thread);
++#define dwc_thread_stop DWC_THREAD_STOP
++
++/** Signifies to the thread that it must stop. */
++#ifdef DWC_LINUX
++/* Linux doesn't need any parameters for kthread_should_stop() */
++extern dwc_bool_t DWC_THREAD_SHOULD_STOP(void);
++#define dwc_thread_should_stop(_thrd_) DWC_THREAD_SHOULD_STOP()
++
++/* No thread_exit function in Linux */
++#define dwc_thread_exit(_thrd_)
++#endif
++
++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
++/** BSD needs the thread pointer for kthread_suspend_check() */
++extern dwc_bool_t DWC_THREAD_SHOULD_STOP(dwc_thread_t *thread);
++#define dwc_thread_should_stop DWC_THREAD_SHOULD_STOP
++
++/** The thread must call this to exit. */
++extern void DWC_THREAD_EXIT(dwc_thread_t *thread);
++#define dwc_thread_exit DWC_THREAD_EXIT
++#endif
++
++
++/** @name Work queues
++ *
++ * Workqs are used to queue a callback function to be called at some later time,
++ * in another thread. */
++struct dwc_workq;
++
++/** Type for a workq */
++typedef struct dwc_workq dwc_workq_t;
++
++/** The type of the callback function to be called. */
++typedef void (*dwc_work_callback_t)(void *data);
++
++/** Allocate a workq */
++extern dwc_workq_t *DWC_WORKQ_ALLOC(char *name);
++#define dwc_workq_alloc(_ctx_,_name_) DWC_WORKQ_ALLOC(_name_)
++
++/** Free a workq.  All work must be completed before being freed. */
++extern void DWC_WORKQ_FREE(dwc_workq_t *workq);
++#define dwc_workq_free DWC_WORKQ_FREE
++
++/** Schedule a callback on the workq, passing in data.  The function will be
++ * scheduled at some later time. */
++extern void DWC_WORKQ_SCHEDULE(dwc_workq_t *workq, dwc_work_callback_t cb,
++			       void *data, char *format, ...)
++#ifdef __GNUC__
++	__attribute__ ((format(printf, 4, 5)));
++#else
++	;
++#endif
++#define dwc_workq_schedule DWC_WORKQ_SCHEDULE
++
++/** Schedule a callback on the workq, that will be called until at least
++ * given number miliseconds have passed. */
++extern void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *workq, dwc_work_callback_t cb,
++				       void *data, uint32_t time, char *format, ...)
++#ifdef __GNUC__
++	__attribute__ ((format(printf, 5, 6)));
++#else
++	;
++#endif
++#define dwc_workq_schedule_delayed DWC_WORKQ_SCHEDULE_DELAYED
++
++/** The number of processes in the workq */
++extern int DWC_WORKQ_PENDING(dwc_workq_t *workq);
++#define dwc_workq_pending DWC_WORKQ_PENDING
++
++/** Blocks until all the work in the workq is complete or timed out.  Returns <
++ * 0 on timeout. */
++extern int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout);
++#define dwc_workq_wait_work_done DWC_WORKQ_WAIT_WORK_DONE
++
++
++/** @name Tasklets
++ *
++ */
++struct dwc_tasklet;
++
++/** Type for a tasklet */
++typedef struct dwc_tasklet dwc_tasklet_t;
++
++/** The type of the callback function to be called */
++typedef void (*dwc_tasklet_callback_t)(void *data);
++
++/** Allocates a tasklet */
++extern dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data);
++#define dwc_task_alloc(_ctx_,_name_,_cb_,_data_) DWC_TASK_ALLOC(_name_, _cb_, _data_)
++
++/** Frees a tasklet */
++extern void DWC_TASK_FREE(dwc_tasklet_t *task);
++#define dwc_task_free DWC_TASK_FREE
++
++/** Schedules a tasklet to run */
++extern void DWC_TASK_SCHEDULE(dwc_tasklet_t *task);
++#define dwc_task_schedule DWC_TASK_SCHEDULE
++
++extern void DWC_TASK_HI_SCHEDULE(dwc_tasklet_t *task);
++#define dwc_task_hi_schedule DWC_TASK_HI_SCHEDULE
++
++/** @name Timer
++ *
++ * Callbacks must be small and atomic.
++ */
++struct dwc_timer;
++
++/** Type for a timer */
++typedef struct dwc_timer dwc_timer_t;
++
++/** The type of the callback function to be called */
++typedef void (*dwc_timer_callback_t)(void *data);
++
++/** Allocates a timer */
++extern dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data);
++#define dwc_timer_alloc(_ctx_,_name_,_cb_,_data_) DWC_TIMER_ALLOC(_name_,_cb_,_data_)
++
++/** Frees a timer */
++extern void DWC_TIMER_FREE(dwc_timer_t *timer);
++#define dwc_timer_free DWC_TIMER_FREE
++
++/** Schedules the timer to run at time ms from now.  And will repeat at every
++ * repeat_interval msec therafter
++ *
++ * Modifies a timer that is still awaiting execution to a new expiration time.
++ * The mod_time is added to the old time.  */
++extern void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time);
++#define dwc_timer_schedule DWC_TIMER_SCHEDULE
++
++/** Disables the timer from execution. */
++extern void DWC_TIMER_CANCEL(dwc_timer_t *timer);
++#define dwc_timer_cancel DWC_TIMER_CANCEL
++
++
++/** @name Spinlocks
++ *
++ * These locks are used when the work between the lock/unlock is atomic and
++ * short.  Interrupts are also disabled during the lock/unlock and thus they are
++ * suitable to lock between interrupt/non-interrupt context.  They also lock
++ * between processes if you have multiple CPUs or Preemption.  If you don't have
++ * multiple CPUS or Preemption, then the you can simply implement the
++ * DWC_SPINLOCK and DWC_SPINUNLOCK to disable and enable interrupts.  Because
++ * the work between the lock/unlock is atomic, the process context will never
++ * change, and so you never have to lock between processes.  */
++
++struct dwc_spinlock;
++
++/** Type for a spinlock */
++typedef struct dwc_spinlock dwc_spinlock_t;
++
++/** Type for the 'flags' argument to spinlock funtions */
++typedef unsigned long dwc_irqflags_t;
++
++/** Returns an initialized lock variable.  This function should allocate and
++ * initialize the OS-specific data structure used for locking.  This data
++ * structure is to be used for the DWC_LOCK and DWC_UNLOCK functions and should
++ * be freed by the DWC_FREE_LOCK when it is no longer used. */
++extern dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void);
++#define dwc_spinlock_alloc(_ctx_) DWC_SPINLOCK_ALLOC()
++
++/** Frees an initialized lock variable. */
++extern void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock);
++#define dwc_spinlock_free(_ctx_,_lock_) DWC_SPINLOCK_FREE(_lock_)
++
++/** Disables interrupts and blocks until it acquires the lock.
++ *
++ * @param lock Pointer to the spinlock.
++ * @param flags Unsigned long for irq flags storage.
++ */
++extern void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags);
++#define dwc_spinlock_irqsave DWC_SPINLOCK_IRQSAVE
++
++/** Re-enables the interrupt and releases the lock.
++ *
++ * @param lock Pointer to the spinlock.
++ * @param flags Unsigned long for irq flags storage.  Must be the same as was
++ * passed into DWC_LOCK.
++ */
++extern void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags);
++#define dwc_spinunlock_irqrestore DWC_SPINUNLOCK_IRQRESTORE
++
++/** Blocks until it acquires the lock.
++ *
++ * @param lock Pointer to the spinlock.
++ */
++extern void DWC_SPINLOCK(dwc_spinlock_t *lock);
++#define dwc_spinlock DWC_SPINLOCK
++
++/** Releases the lock.
++ *
++ * @param lock Pointer to the spinlock.
++ */
++extern void DWC_SPINUNLOCK(dwc_spinlock_t *lock);
++#define dwc_spinunlock DWC_SPINUNLOCK
++
++
++/** @name Mutexes
++ *
++ * Unlike spinlocks Mutexes lock only between processes and the work between the
++ * lock/unlock CAN block, therefore it CANNOT be called from interrupt context.
++ */
++
++struct dwc_mutex;
++
++/** Type for a mutex */
++typedef struct dwc_mutex dwc_mutex_t;
++
++/* For Linux Mutex Debugging make it inline because the debugging routines use
++ * the symbol to determine recursive locking.  This makes it falsely think
++ * recursive locking occurs. */
++#if defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)
++#define DWC_MUTEX_ALLOC_LINUX_DEBUG(__mutexp) ({ \
++	__mutexp = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mutex)); \
++	mutex_init((struct mutex *)__mutexp); \
++})
++#endif
++
++/** Allocate a mutex */
++extern dwc_mutex_t *DWC_MUTEX_ALLOC(void);
++#define dwc_mutex_alloc(_ctx_) DWC_MUTEX_ALLOC()
++
++/* For memory leak debugging when using Linux Mutex Debugging */
++#if defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)
++#define DWC_MUTEX_FREE(__mutexp) do { \
++	mutex_destroy((struct mutex *)__mutexp); \
++	DWC_FREE(__mutexp); \
++} while(0)
++#else
++/** Free a mutex */
++extern void DWC_MUTEX_FREE(dwc_mutex_t *mutex);
++#define dwc_mutex_free(_ctx_,_mutex_) DWC_MUTEX_FREE(_mutex_)
++#endif
++
++/** Lock a mutex */
++extern void DWC_MUTEX_LOCK(dwc_mutex_t *mutex);
++#define dwc_mutex_lock DWC_MUTEX_LOCK
++
++/** Non-blocking lock returns 1 on successful lock. */
++extern int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex);
++#define dwc_mutex_trylock DWC_MUTEX_TRYLOCK
++
++/** Unlock a mutex */
++extern void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex);
++#define dwc_mutex_unlock DWC_MUTEX_UNLOCK
++
++
++/** @name Time */
++
++/** Microsecond delay.
++ *
++ * @param usecs  Microseconds to delay.
++ */
++extern void DWC_UDELAY(uint32_t usecs);
++#define dwc_udelay DWC_UDELAY
++
++/** Millisecond delay.
++ *
++ * @param msecs  Milliseconds to delay.
++ */
++extern void DWC_MDELAY(uint32_t msecs);
++#define dwc_mdelay DWC_MDELAY
++
++/** Non-busy waiting.
++ * Sleeps for specified number of milliseconds.
++ *
++ * @param msecs Milliseconds to sleep.
++ */
++extern void DWC_MSLEEP(uint32_t msecs);
++#define dwc_msleep DWC_MSLEEP
++
++/**
++ * Returns number of milliseconds since boot.
++ */
++extern uint32_t DWC_TIME(void);
++#define dwc_time DWC_TIME
++
++
++
++
++/* @mainpage DWC Portability and Common Library
++ *
++ * This is the documentation for the DWC Portability and Common Library.
++ *
++ * @section intro Introduction
++ *
++ * The DWC Portability library consists of wrapper calls and data structures to
++ * all low-level functions which are typically provided by the OS.  The WUDEV
++ * driver uses only these functions.  In order to port the WUDEV driver, only
++ * the functions in this library need to be re-implemented, with the same
++ * behavior as documented here.
++ *
++ * The Common library consists of higher level functions, which rely only on
++ * calling the functions from the DWC Portability library.  These common
++ * routines are shared across modules.  Some of the common libraries need to be
++ * used directly by the driver programmer when porting WUDEV.  Such as the
++ * parameter and notification libraries.
++ *
++ * @section low Portability Library OS Wrapper Functions
++ *
++ * Any function starting with DWC and in all CAPS is a low-level OS-wrapper that
++ * needs to be implemented when porting, for example DWC_MUTEX_ALLOC().  All of
++ * these functions are included in the dwc_os.h file.
++ *
++ * There are many functions here covering a wide array of OS services.  Please
++ * see dwc_os.h for details, and implementation notes for each function.
++ *
++ * @section common Common Library Functions
++ *
++ * Any function starting with dwc and in all lowercase is a common library
++ * routine.  These functions have a portable implementation and do not need to
++ * be reimplemented when porting.  The common routines can be used by any
++ * driver, and some must be used by the end user to control the drivers.  For
++ * example, you must use the Parameter common library in order to set the
++ * parameters in the WUDEV module.
++ *
++ * The common libraries consist of the following:
++ *
++ * - Connection Contexts - Used internally and can be used by end-user.  See dwc_cc.h
++ * - Parameters - Used internally and can be used by end-user.  See dwc_params.h
++ * - Notifications - Used internally and can be used by end-user.  See dwc_notifier.h
++ * - Lists - Used internally and can be used by end-user.  See dwc_list.h
++ * - Memory Debugging - Used internally and can be used by end-user.  See dwc_os.h
++ * - Modpow - Used internally only.  See dwc_modpow.h
++ * - DH - Used internally only.  See dwc_dh.h
++ * - Crypto - Used internally only.  See dwc_crypto.h
++ *
++ *
++ * @section prereq Prerequistes For dwc_os.h
++ * @subsection types Data Types
++ *
++ * The dwc_os.h file assumes that several low-level data types are pre defined for the
++ * compilation environment.  These data types are:
++ *
++ * - uint8_t - unsigned 8-bit data type
++ * - int8_t - signed 8-bit data type
++ * - uint16_t - unsigned 16-bit data type
++ * - int16_t - signed 16-bit data type
++ * - uint32_t - unsigned 32-bit data type
++ * - int32_t - signed 32-bit data type
++ * - uint64_t - unsigned 64-bit data type
++ * - int64_t - signed 64-bit data type
++ *
++ * Ensure that these are defined before using dwc_os.h.  The easiest way to do
++ * that is to modify the top of the file to include the appropriate header.
++ * This is already done for the Linux environment.  If the DWC_LINUX macro is
++ * defined, the correct header will be added.  A standard header <stdint.h> is
++ * also used for environments where standard C headers are available.
++ *
++ * @subsection stdarg Variable Arguments
++ *
++ * Variable arguments are provided by a standard C header <stdarg.h>.  it is
++ * available in Both the Linux and ANSI C enviornment.  An equivalent must be
++ * provided in your enviornment in order to use dwc_os.h with the debug and
++ * tracing message functionality.
++ *
++ * @subsection thread Threading
++ *
++ * WUDEV Core must be run on an operating system that provides for multiple
++ * threads/processes.  Threading can be implemented in many ways, even in
++ * embedded systems without an operating system.  At the bare minimum, the
++ * system should be able to start any number of processes at any time to handle
++ * special work.  It need not be a pre-emptive system.  Process context can
++ * change upon a call to a blocking function.  The hardware interrupt context
++ * that calls the module's ISR() function must be differentiable from process
++ * context, even if your processes are impemented via a hardware interrupt.
++ * Further locking mechanism between process must exist (or be implemented), and
++ * process context must have a way to disable interrupts for a period of time to
++ * lock them out.  If all of this exists, the functions in dwc_os.h related to
++ * threading should be able to be implemented with the defined behavior.
++ *
++ */
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _DWC_OS_H_ */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_common_port/Makefile linux-raspberry-pi/drivers/usb/host/dwc_common_port/Makefile
+--- linux-3.12.6/drivers/usb/host/dwc_common_port/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_common_port/Makefile	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,58 @@
++#
++# Makefile for DWC_common library
++#
++
++ifneq ($(KERNELRELEASE),)
++
++EXTRA_CFLAGS	+= -DDWC_LINUX
++#EXTRA_CFLAGS	+= -DDEBUG
++#EXTRA_CFLAGS	+= -DDWC_DEBUG_REGS
++#EXTRA_CFLAGS	+= -DDWC_DEBUG_MEMORY
++
++EXTRA_CFLAGS	+= -DDWC_LIBMODULE
++EXTRA_CFLAGS	+= -DDWC_CCLIB
++#EXTRA_CFLAGS	+= -DDWC_CRYPTOLIB
++EXTRA_CFLAGS	+= -DDWC_NOTIFYLIB
++EXTRA_CFLAGS	+= -DDWC_UTFLIB
++
++obj-$(CONFIG_USB_DWCOTG)	+= dwc_common_port_lib.o
++dwc_common_port_lib-objs := dwc_cc.o dwc_modpow.o dwc_dh.o \
++			    dwc_crypto.o dwc_notifier.o \
++			    dwc_common_linux.o dwc_mem.o
++
++kernrelwd := $(subst ., ,$(KERNELRELEASE))
++kernrel3 := $(word 1,$(kernrelwd)).$(word 2,$(kernrelwd)).$(word 3,$(kernrelwd))
++
++ifneq ($(kernrel3),2.6.20)
++# grayg - I only know that we use EXTRA_CFLAGS in 2.6.31 actually
++EXTRA_CFLAGS += $(CPPFLAGS)
++endif
++
++else
++
++#ifeq ($(KDIR),)
++#$(error Must give "KDIR=/path/to/kernel/source" on command line or in environment)
++#endif
++
++ifeq ($(ARCH),)
++$(error Must give "ARCH=<arch>" on command line or in environment. Also, if \
++ cross-compiling, must give "CROSS_COMPILE=/path/to/compiler/plus/tool-prefix-")
++endif
++
++ifeq ($(DOXYGEN),)
++DOXYGEN		:= doxygen
++endif
++
++default:
++	$(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules
++
++docs:	$(wildcard *.[hc]) doc/doxygen.cfg
++	$(DOXYGEN) doc/doxygen.cfg
++
++tags:	$(wildcard *.[hc])
++	$(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h)
++
++endif
++
++clean:
++	rm -rf *.o *.ko .*.cmd *.mod.c .*.o.d .*.o.tmp modules.order Module.markers Module.symvers .tmp_versions/
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_common_port/Makefile.fbsd linux-raspberry-pi/drivers/usb/host/dwc_common_port/Makefile.fbsd
+--- linux-3.12.6/drivers/usb/host/dwc_common_port/Makefile.fbsd	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_common_port/Makefile.fbsd	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,17 @@
++CFLAGS	+= -I/sys/i386/compile/GENERIC -I/sys/i386/include -I/usr/include
++CFLAGS	+= -DDWC_FREEBSD
++CFLAGS	+= -DDEBUG
++#CFLAGS	+= -DDWC_DEBUG_REGS
++#CFLAGS	+= -DDWC_DEBUG_MEMORY
++
++#CFLAGS	+= -DDWC_LIBMODULE
++#CFLAGS	+= -DDWC_CCLIB
++#CFLAGS	+= -DDWC_CRYPTOLIB
++#CFLAGS	+= -DDWC_NOTIFYLIB
++#CFLAGS	+= -DDWC_UTFLIB
++
++KMOD = dwc_common_port_lib
++SRCS = dwc_cc.c dwc_modpow.c dwc_dh.c dwc_crypto.c dwc_notifier.c \
++       dwc_common_fbsd.c dwc_mem.c
++
++.include <bsd.kmod.mk>
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_common_port/Makefile.linux linux-raspberry-pi/drivers/usb/host/dwc_common_port/Makefile.linux
+--- linux-3.12.6/drivers/usb/host/dwc_common_port/Makefile.linux	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_common_port/Makefile.linux	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,49 @@
++#
++# Makefile for DWC_common library
++#
++ifneq ($(KERNELRELEASE),)
++
++EXTRA_CFLAGS	+= -DDWC_LINUX
++#EXTRA_CFLAGS	+= -DDEBUG
++#EXTRA_CFLAGS	+= -DDWC_DEBUG_REGS
++#EXTRA_CFLAGS	+= -DDWC_DEBUG_MEMORY
++
++EXTRA_CFLAGS	+= -DDWC_LIBMODULE
++EXTRA_CFLAGS	+= -DDWC_CCLIB
++EXTRA_CFLAGS	+= -DDWC_CRYPTOLIB
++EXTRA_CFLAGS	+= -DDWC_NOTIFYLIB
++EXTRA_CFLAGS	+= -DDWC_UTFLIB
++
++obj-m			 := dwc_common_port_lib.o
++dwc_common_port_lib-objs := dwc_cc.o dwc_modpow.o dwc_dh.o \
++			    dwc_crypto.o dwc_notifier.o \
++			    dwc_common_linux.o dwc_mem.o
++
++else
++
++ifeq ($(KDIR),)
++$(error Must give "KDIR=/path/to/kernel/source" on command line or in environment)
++endif
++
++ifeq ($(ARCH),)
++$(error Must give "ARCH=<arch>" on command line or in environment. Also, if \
++ cross-compiling, must give "CROSS_COMPILE=/path/to/compiler/plus/tool-prefix-")
++endif
++
++ifeq ($(DOXYGEN),)
++DOXYGEN		:= doxygen
++endif
++
++default:
++	$(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules
++
++docs:	$(wildcard *.[hc]) doc/doxygen.cfg
++	$(DOXYGEN) doc/doxygen.cfg
++
++tags:	$(wildcard *.[hc])
++	$(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h)
++
++endif
++
++clean:
++	rm -rf *.o *.ko .*.cmd *.mod.c .*.o.d .*.o.tmp modules.order Module.markers Module.symvers .tmp_versions/
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_common_port/usb.h linux-raspberry-pi/drivers/usb/host/dwc_common_port/usb.h
+--- linux-3.12.6/drivers/usb/host/dwc_common_port/usb.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_common_port/usb.h	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,946 @@
++/*
++ * Copyright (c) 1998 The NetBSD Foundation, Inc.
++ * All rights reserved.
++ *
++ * This code is derived from software contributed to The NetBSD Foundation
++ * by Lennart Augustsson (lennart@augustsson.net) at
++ * Carlstedt Research & Technology.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions and the following disclaimer.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. All advertising materials mentioning features or use of this software
++ *    must display the following acknowledgement:
++ *        This product includes software developed by the NetBSD
++ *        Foundation, Inc. and its contributors.
++ * 4. Neither the name of The NetBSD Foundation nor the names of its
++ *    contributors may be used to endorse or promote products derived
++ *    from this software without specific prior written permission.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
++ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
++ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
++ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
++ * POSSIBILITY OF SUCH DAMAGE.
++ */
++
++/* Modified by Synopsys, Inc, 12/12/2007 */
++
++
++#ifndef _USB_H_
++#define _USB_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/*
++ * The USB records contain some unaligned little-endian word
++ * components.  The U[SG]ETW macros take care of both the alignment
++ * and endian problem and should always be used to access non-byte
++ * values.
++ */
++typedef u_int8_t uByte;
++typedef u_int8_t uWord[2];
++typedef u_int8_t uDWord[4];
++
++#define USETW2(w,h,l) ((w)[0] = (u_int8_t)(l), (w)[1] = (u_int8_t)(h))
++#define UCONSTW(x)	{ (x) & 0xff, ((x) >> 8) & 0xff }
++#define UCONSTDW(x)	{ (x) & 0xff, ((x) >> 8) & 0xff, \
++			  ((x) >> 16) & 0xff, ((x) >> 24) & 0xff }
++
++#if 1
++#define UGETW(w) ((w)[0] | ((w)[1] << 8))
++#define USETW(w,v) ((w)[0] = (u_int8_t)(v), (w)[1] = (u_int8_t)((v) >> 8))
++#define UGETDW(w) ((w)[0] | ((w)[1] << 8) | ((w)[2] << 16) | ((w)[3] << 24))
++#define USETDW(w,v) ((w)[0] = (u_int8_t)(v), \
++		     (w)[1] = (u_int8_t)((v) >> 8), \
++		     (w)[2] = (u_int8_t)((v) >> 16), \
++		     (w)[3] = (u_int8_t)((v) >> 24))
++#else
++/*
++ * On little-endian machines that can handle unanliged accesses
++ * (e.g. i386) these macros can be replaced by the following.
++ */
++#define UGETW(w) (*(u_int16_t *)(w))
++#define USETW(w,v) (*(u_int16_t *)(w) = (v))
++#define UGETDW(w) (*(u_int32_t *)(w))
++#define USETDW(w,v) (*(u_int32_t *)(w) = (v))
++#endif
++
++/*
++ * Macros for accessing UAS IU fields, which are big-endian
++ */
++#define IUSETW2(w,h,l) ((w)[0] = (u_int8_t)(h), (w)[1] = (u_int8_t)(l))
++#define IUCONSTW(x)	{ ((x) >> 8) & 0xff, (x) & 0xff }
++#define IUCONSTDW(x)	{ ((x) >> 24) & 0xff, ((x) >> 16) & 0xff, \
++			((x) >> 8) & 0xff, (x) & 0xff }
++#define IUGETW(w) (((w)[0] << 8) | (w)[1])
++#define IUSETW(w,v) ((w)[0] = (u_int8_t)((v) >> 8), (w)[1] = (u_int8_t)(v))
++#define IUGETDW(w) (((w)[0] << 24) | ((w)[1] << 16) | ((w)[2] << 8) | (w)[3])
++#define IUSETDW(w,v) ((w)[0] = (u_int8_t)((v) >> 24), \
++		      (w)[1] = (u_int8_t)((v) >> 16), \
++		      (w)[2] = (u_int8_t)((v) >> 8), \
++		      (w)[3] = (u_int8_t)(v))
++
++#define UPACKED __attribute__((__packed__))
++
++typedef struct {
++	uByte		bmRequestType;
++	uByte		bRequest;
++	uWord		wValue;
++	uWord		wIndex;
++	uWord		wLength;
++} UPACKED usb_device_request_t;
++
++#define UT_GET_DIR(a) ((a) & 0x80)
++#define UT_WRITE		0x00
++#define UT_READ			0x80
++
++#define UT_GET_TYPE(a) ((a) & 0x60)
++#define UT_STANDARD		0x00
++#define UT_CLASS		0x20
++#define UT_VENDOR		0x40
++
++#define UT_GET_RECIPIENT(a) ((a) & 0x1f)
++#define UT_DEVICE		0x00
++#define UT_INTERFACE		0x01
++#define UT_ENDPOINT		0x02
++#define UT_OTHER		0x03
++
++#define UT_READ_DEVICE		(UT_READ  | UT_STANDARD | UT_DEVICE)
++#define UT_READ_INTERFACE	(UT_READ  | UT_STANDARD | UT_INTERFACE)
++#define UT_READ_ENDPOINT	(UT_READ  | UT_STANDARD | UT_ENDPOINT)
++#define UT_WRITE_DEVICE		(UT_WRITE | UT_STANDARD | UT_DEVICE)
++#define UT_WRITE_INTERFACE	(UT_WRITE | UT_STANDARD | UT_INTERFACE)
++#define UT_WRITE_ENDPOINT	(UT_WRITE | UT_STANDARD | UT_ENDPOINT)
++#define UT_READ_CLASS_DEVICE	(UT_READ  | UT_CLASS | UT_DEVICE)
++#define UT_READ_CLASS_INTERFACE	(UT_READ  | UT_CLASS | UT_INTERFACE)
++#define UT_READ_CLASS_OTHER	(UT_READ  | UT_CLASS | UT_OTHER)
++#define UT_READ_CLASS_ENDPOINT	(UT_READ  | UT_CLASS | UT_ENDPOINT)
++#define UT_WRITE_CLASS_DEVICE	(UT_WRITE | UT_CLASS | UT_DEVICE)
++#define UT_WRITE_CLASS_INTERFACE (UT_WRITE | UT_CLASS | UT_INTERFACE)
++#define UT_WRITE_CLASS_OTHER	(UT_WRITE | UT_CLASS | UT_OTHER)
++#define UT_WRITE_CLASS_ENDPOINT	(UT_WRITE | UT_CLASS | UT_ENDPOINT)
++#define UT_READ_VENDOR_DEVICE	(UT_READ  | UT_VENDOR | UT_DEVICE)
++#define UT_READ_VENDOR_INTERFACE (UT_READ  | UT_VENDOR | UT_INTERFACE)
++#define UT_READ_VENDOR_OTHER	(UT_READ  | UT_VENDOR | UT_OTHER)
++#define UT_READ_VENDOR_ENDPOINT	(UT_READ  | UT_VENDOR | UT_ENDPOINT)
++#define UT_WRITE_VENDOR_DEVICE	(UT_WRITE | UT_VENDOR | UT_DEVICE)
++#define UT_WRITE_VENDOR_INTERFACE (UT_WRITE | UT_VENDOR | UT_INTERFACE)
++#define UT_WRITE_VENDOR_OTHER	(UT_WRITE | UT_VENDOR | UT_OTHER)
++#define UT_WRITE_VENDOR_ENDPOINT (UT_WRITE | UT_VENDOR | UT_ENDPOINT)
++
++/* Requests */
++#define UR_GET_STATUS		0x00
++#define  USTAT_STANDARD_STATUS  0x00
++#define  WUSTAT_WUSB_FEATURE    0x01
++#define  WUSTAT_CHANNEL_INFO    0x02
++#define  WUSTAT_RECEIVED_DATA   0x03
++#define  WUSTAT_MAS_AVAILABILITY 0x04
++#define  WUSTAT_CURRENT_TRANSMIT_POWER 0x05
++#define UR_CLEAR_FEATURE	0x01
++#define UR_SET_FEATURE		0x03
++#define UR_SET_AND_TEST_FEATURE 0x0c
++#define UR_SET_ADDRESS		0x05
++#define UR_GET_DESCRIPTOR	0x06
++#define  UDESC_DEVICE		0x01
++#define  UDESC_CONFIG		0x02
++#define  UDESC_STRING		0x03
++#define  UDESC_INTERFACE	0x04
++#define  UDESC_ENDPOINT		0x05
++#define  UDESC_SS_USB_COMPANION	0x30
++#define  UDESC_DEVICE_QUALIFIER	0x06
++#define  UDESC_OTHER_SPEED_CONFIGURATION 0x07
++#define  UDESC_INTERFACE_POWER	0x08
++#define  UDESC_OTG		0x09
++#define  WUDESC_SECURITY	0x0c
++#define  WUDESC_KEY		0x0d
++#define   WUD_GET_KEY_INDEX(_wValue_) ((_wValue_) & 0xf)
++#define   WUD_GET_KEY_TYPE(_wValue_) (((_wValue_) & 0x30) >> 4)
++#define    WUD_KEY_TYPE_ASSOC    0x01
++#define    WUD_KEY_TYPE_GTK      0x02
++#define   WUD_GET_KEY_ORIGIN(_wValue_) (((_wValue_) & 0x40) >> 6)
++#define    WUD_KEY_ORIGIN_HOST   0x00
++#define    WUD_KEY_ORIGIN_DEVICE 0x01
++#define  WUDESC_ENCRYPTION_TYPE	0x0e
++#define  WUDESC_BOS		0x0f
++#define  WUDESC_DEVICE_CAPABILITY 0x10
++#define  WUDESC_WIRELESS_ENDPOINT_COMPANION 0x11
++#define  UDESC_BOS		0x0f
++#define  UDESC_DEVICE_CAPABILITY 0x10
++#define  UDESC_CS_DEVICE	0x21	/* class specific */
++#define  UDESC_CS_CONFIG	0x22
++#define  UDESC_CS_STRING	0x23
++#define  UDESC_CS_INTERFACE	0x24
++#define  UDESC_CS_ENDPOINT	0x25
++#define  UDESC_HUB		0x29
++#define UR_SET_DESCRIPTOR	0x07
++#define UR_GET_CONFIG		0x08
++#define UR_SET_CONFIG		0x09
++#define UR_GET_INTERFACE	0x0a
++#define UR_SET_INTERFACE	0x0b
++#define UR_SYNCH_FRAME		0x0c
++#define WUR_SET_ENCRYPTION      0x0d
++#define WUR_GET_ENCRYPTION	0x0e
++#define WUR_SET_HANDSHAKE	0x0f
++#define WUR_GET_HANDSHAKE	0x10
++#define WUR_SET_CONNECTION	0x11
++#define WUR_SET_SECURITY_DATA	0x12
++#define WUR_GET_SECURITY_DATA	0x13
++#define WUR_SET_WUSB_DATA	0x14
++#define  WUDATA_DRPIE_INFO	0x01
++#define  WUDATA_TRANSMIT_DATA	0x02
++#define  WUDATA_TRANSMIT_PARAMS	0x03
++#define  WUDATA_RECEIVE_PARAMS	0x04
++#define  WUDATA_TRANSMIT_POWER	0x05
++#define WUR_LOOPBACK_DATA_WRITE	0x15
++#define WUR_LOOPBACK_DATA_READ	0x16
++#define WUR_SET_INTERFACE_DS	0x17
++
++/* Feature numbers */
++#define UF_ENDPOINT_HALT	0
++#define UF_DEVICE_REMOTE_WAKEUP	1
++#define UF_TEST_MODE		2
++#define UF_DEVICE_B_HNP_ENABLE	3
++#define UF_DEVICE_A_HNP_SUPPORT	4
++#define UF_DEVICE_A_ALT_HNP_SUPPORT 5
++#define WUF_WUSB		3
++#define  WUF_TX_DRPIE		0x0
++#define  WUF_DEV_XMIT_PACKET	0x1
++#define  WUF_COUNT_PACKETS	0x2
++#define  WUF_CAPTURE_PACKETS	0x3
++#define UF_FUNCTION_SUSPEND	0
++#define UF_U1_ENABLE		48
++#define UF_U2_ENABLE		49
++#define UF_LTM_ENABLE		50
++
++/* Class requests from the USB 2.0 hub spec, table 11-15 */
++#define UCR_CLEAR_HUB_FEATURE		(0x2000 | UR_CLEAR_FEATURE)
++#define UCR_CLEAR_PORT_FEATURE		(0x2300 | UR_CLEAR_FEATURE)
++#define UCR_GET_HUB_DESCRIPTOR		(0xa000 | UR_GET_DESCRIPTOR)
++#define UCR_GET_HUB_STATUS		(0xa000 | UR_GET_STATUS)
++#define UCR_GET_PORT_STATUS		(0xa300 | UR_GET_STATUS)
++#define UCR_SET_HUB_FEATURE		(0x2000 | UR_SET_FEATURE)
++#define UCR_SET_PORT_FEATURE		(0x2300 | UR_SET_FEATURE)
++#define UCR_SET_AND_TEST_PORT_FEATURE	(0xa300 | UR_SET_AND_TEST_FEATURE)
++
++#ifdef _MSC_VER
++#include <pshpack1.h>
++#endif
++
++typedef struct {
++	uByte		bLength;
++	uByte		bDescriptorType;
++	uByte		bDescriptorSubtype;
++} UPACKED usb_descriptor_t;
++
++typedef struct {
++	uByte		bLength;
++	uByte		bDescriptorType;
++} UPACKED usb_descriptor_header_t;
++
++typedef struct {
++	uByte		bLength;
++	uByte		bDescriptorType;
++	uWord		bcdUSB;
++#define UD_USB_2_0		0x0200
++#define UD_IS_USB2(d) (UGETW((d)->bcdUSB) >= UD_USB_2_0)
++	uByte		bDeviceClass;
++	uByte		bDeviceSubClass;
++	uByte		bDeviceProtocol;
++	uByte		bMaxPacketSize;
++	/* The fields below are not part of the initial descriptor. */
++	uWord		idVendor;
++	uWord		idProduct;
++	uWord		bcdDevice;
++	uByte		iManufacturer;
++	uByte		iProduct;
++	uByte		iSerialNumber;
++	uByte		bNumConfigurations;
++} UPACKED usb_device_descriptor_t;
++#define USB_DEVICE_DESCRIPTOR_SIZE 18
++
++typedef struct {
++	uByte		bLength;
++	uByte		bDescriptorType;
++	uWord		wTotalLength;
++	uByte		bNumInterface;
++	uByte		bConfigurationValue;
++	uByte		iConfiguration;
++#define UC_ATT_ONE		(1 << 7)	/* must be set */
++#define UC_ATT_SELFPOWER	(1 << 6)	/* self powered */
++#define UC_ATT_WAKEUP		(1 << 5)	/* can wakeup */
++#define UC_ATT_BATTERY		(1 << 4)	/* battery powered */
++	uByte		bmAttributes;
++#define UC_BUS_POWERED		0x80
++#define UC_SELF_POWERED		0x40
++#define UC_REMOTE_WAKEUP	0x20
++	uByte		bMaxPower; /* max current in 2 mA units */
++#define UC_POWER_FACTOR 2
++} UPACKED usb_config_descriptor_t;
++#define USB_CONFIG_DESCRIPTOR_SIZE 9
++
++typedef struct {
++	uByte		bLength;
++	uByte		bDescriptorType;
++	uByte		bInterfaceNumber;
++	uByte		bAlternateSetting;
++	uByte		bNumEndpoints;
++	uByte		bInterfaceClass;
++	uByte		bInterfaceSubClass;
++	uByte		bInterfaceProtocol;
++	uByte		iInterface;
++} UPACKED usb_interface_descriptor_t;
++#define USB_INTERFACE_DESCRIPTOR_SIZE 9
++
++typedef struct {
++	uByte		bLength;
++	uByte		bDescriptorType;
++	uByte		bEndpointAddress;
++#define UE_GET_DIR(a)	((a) & 0x80)
++#define UE_SET_DIR(a,d)	((a) | (((d)&1) << 7))
++#define UE_DIR_IN	0x80
++#define UE_DIR_OUT	0x00
++#define UE_ADDR		0x0f
++#define UE_GET_ADDR(a)	((a) & UE_ADDR)
++	uByte		bmAttributes;
++#define UE_XFERTYPE	0x03
++#define  UE_CONTROL	0x00
++#define  UE_ISOCHRONOUS	0x01
++#define  UE_BULK	0x02
++#define  UE_INTERRUPT	0x03
++#define UE_GET_XFERTYPE(a)	((a) & UE_XFERTYPE)
++#define UE_ISO_TYPE	0x0c
++#define  UE_ISO_ASYNC	0x04
++#define  UE_ISO_ADAPT	0x08
++#define  UE_ISO_SYNC	0x0c
++#define UE_GET_ISO_TYPE(a)	((a) & UE_ISO_TYPE)
++	uWord		wMaxPacketSize;
++	uByte		bInterval;
++} UPACKED usb_endpoint_descriptor_t;
++#define USB_ENDPOINT_DESCRIPTOR_SIZE 7
++
++typedef struct ss_endpoint_companion_descriptor {
++	uByte bLength;
++	uByte bDescriptorType;
++	uByte bMaxBurst;
++#define USSE_GET_MAX_STREAMS(a)		((a) & 0x1f)
++#define USSE_SET_MAX_STREAMS(a, b)	((a) | ((b) & 0x1f))
++#define USSE_GET_MAX_PACKET_NUM(a)	((a) & 0x03)
++#define USSE_SET_MAX_PACKET_NUM(a, b)	((a) | ((b) & 0x03))
++	uByte bmAttributes;
++	uWord wBytesPerInterval;
++} UPACKED ss_endpoint_companion_descriptor_t;
++#define USB_SS_ENDPOINT_COMPANION_DESCRIPTOR_SIZE 6
++
++typedef struct {
++	uByte		bLength;
++	uByte		bDescriptorType;
++	uWord		bString[127];
++} UPACKED usb_string_descriptor_t;
++#define USB_MAX_STRING_LEN 128
++#define USB_LANGUAGE_TABLE 0	/* # of the string language id table */
++
++/* Hub specific request */
++#define UR_GET_BUS_STATE	0x02
++#define UR_CLEAR_TT_BUFFER	0x08
++#define UR_RESET_TT		0x09
++#define UR_GET_TT_STATE		0x0a
++#define UR_STOP_TT		0x0b
++
++/* Hub features */
++#define UHF_C_HUB_LOCAL_POWER	0
++#define UHF_C_HUB_OVER_CURRENT	1
++#define UHF_PORT_CONNECTION	0
++#define UHF_PORT_ENABLE		1
++#define UHF_PORT_SUSPEND	2
++#define UHF_PORT_OVER_CURRENT	3
++#define UHF_PORT_RESET		4
++#define UHF_PORT_L1		5
++#define UHF_PORT_POWER		8
++#define UHF_PORT_LOW_SPEED	9
++#define UHF_PORT_HIGH_SPEED	10
++#define UHF_C_PORT_CONNECTION	16
++#define UHF_C_PORT_ENABLE	17
++#define UHF_C_PORT_SUSPEND	18
++#define UHF_C_PORT_OVER_CURRENT	19
++#define UHF_C_PORT_RESET	20
++#define UHF_C_PORT_L1		23
++#define UHF_PORT_TEST		21
++#define UHF_PORT_INDICATOR	22
++
++typedef struct {
++	uByte		bDescLength;
++	uByte		bDescriptorType;
++	uByte		bNbrPorts;
++	uWord		wHubCharacteristics;
++#define UHD_PWR			0x0003
++#define  UHD_PWR_GANGED		0x0000
++#define  UHD_PWR_INDIVIDUAL	0x0001
++#define  UHD_PWR_NO_SWITCH	0x0002
++#define UHD_COMPOUND		0x0004
++#define UHD_OC			0x0018
++#define  UHD_OC_GLOBAL		0x0000
++#define  UHD_OC_INDIVIDUAL	0x0008
++#define  UHD_OC_NONE		0x0010
++#define UHD_TT_THINK		0x0060
++#define  UHD_TT_THINK_8		0x0000
++#define  UHD_TT_THINK_16	0x0020
++#define  UHD_TT_THINK_24	0x0040
++#define  UHD_TT_THINK_32	0x0060
++#define UHD_PORT_IND		0x0080
++	uByte		bPwrOn2PwrGood;	/* delay in 2 ms units */
++#define UHD_PWRON_FACTOR 2
++	uByte		bHubContrCurrent;
++	uByte		DeviceRemovable[32]; /* max 255 ports */
++#define UHD_NOT_REMOV(desc, i) \
++    (((desc)->DeviceRemovable[(i)/8] >> ((i) % 8)) & 1)
++	/* deprecated */ uByte		PortPowerCtrlMask[1];
++} UPACKED usb_hub_descriptor_t;
++#define USB_HUB_DESCRIPTOR_SIZE 9 /* includes deprecated PortPowerCtrlMask */
++
++typedef struct {
++	uByte		bLength;
++	uByte		bDescriptorType;
++	uWord		bcdUSB;
++	uByte		bDeviceClass;
++	uByte		bDeviceSubClass;
++	uByte		bDeviceProtocol;
++	uByte		bMaxPacketSize0;
++	uByte		bNumConfigurations;
++	uByte		bReserved;
++} UPACKED usb_device_qualifier_t;
++#define USB_DEVICE_QUALIFIER_SIZE 10
++
++typedef struct {
++	uByte		bLength;
++	uByte		bDescriptorType;
++	uByte		bmAttributes;
++#define UOTG_SRP	0x01
++#define UOTG_HNP	0x02
++} UPACKED usb_otg_descriptor_t;
++
++/* OTG feature selectors */
++#define UOTG_B_HNP_ENABLE	3
++#define UOTG_A_HNP_SUPPORT	4
++#define UOTG_A_ALT_HNP_SUPPORT	5
++
++typedef struct {
++	uWord		wStatus;
++/* Device status flags */
++#define UDS_SELF_POWERED		0x0001
++#define UDS_REMOTE_WAKEUP		0x0002
++/* Endpoint status flags */
++#define UES_HALT			0x0001
++} UPACKED usb_status_t;
++
++typedef struct {
++	uWord		wHubStatus;
++#define UHS_LOCAL_POWER			0x0001
++#define UHS_OVER_CURRENT		0x0002
++	uWord		wHubChange;
++} UPACKED usb_hub_status_t;
++
++typedef struct {
++	uWord		wPortStatus;
++#define UPS_CURRENT_CONNECT_STATUS	0x0001
++#define UPS_PORT_ENABLED		0x0002
++#define UPS_SUSPEND			0x0004
++#define UPS_OVERCURRENT_INDICATOR	0x0008
++#define UPS_RESET			0x0010
++#define UPS_PORT_POWER			0x0100
++#define UPS_LOW_SPEED			0x0200
++#define UPS_HIGH_SPEED			0x0400
++#define UPS_PORT_TEST			0x0800
++#define UPS_PORT_INDICATOR		0x1000
++	uWord		wPortChange;
++#define UPS_C_CONNECT_STATUS		0x0001
++#define UPS_C_PORT_ENABLED		0x0002
++#define UPS_C_SUSPEND			0x0004
++#define UPS_C_OVERCURRENT_INDICATOR	0x0008
++#define UPS_C_PORT_RESET		0x0010
++} UPACKED usb_port_status_t;
++
++#ifdef _MSC_VER
++#include <poppack.h>
++#endif
++
++/* Device class codes */
++#define UDCLASS_IN_INTERFACE	0x00
++#define UDCLASS_COMM		0x02
++#define UDCLASS_HUB		0x09
++#define  UDSUBCLASS_HUB		0x00
++#define  UDPROTO_FSHUB		0x00
++#define  UDPROTO_HSHUBSTT	0x01
++#define  UDPROTO_HSHUBMTT	0x02
++#define UDCLASS_DIAGNOSTIC	0xdc
++#define UDCLASS_WIRELESS	0xe0
++#define  UDSUBCLASS_RF		0x01
++#define   UDPROTO_BLUETOOTH	0x01
++#define UDCLASS_VENDOR		0xff
++
++/* Interface class codes */
++#define UICLASS_UNSPEC		0x00
++
++#define UICLASS_AUDIO		0x01
++#define  UISUBCLASS_AUDIOCONTROL	1
++#define  UISUBCLASS_AUDIOSTREAM		2
++#define  UISUBCLASS_MIDISTREAM		3
++
++#define UICLASS_CDC		0x02 /* communication */
++#define  UISUBCLASS_DIRECT_LINE_CONTROL_MODEL	1
++#define  UISUBCLASS_ABSTRACT_CONTROL_MODEL	2
++#define  UISUBCLASS_TELEPHONE_CONTROL_MODEL	3
++#define  UISUBCLASS_MULTICHANNEL_CONTROL_MODEL	4
++#define  UISUBCLASS_CAPI_CONTROLMODEL		5
++#define  UISUBCLASS_ETHERNET_NETWORKING_CONTROL_MODEL 6
++#define  UISUBCLASS_ATM_NETWORKING_CONTROL_MODEL 7
++#define   UIPROTO_CDC_AT			1
++
++#define UICLASS_HID		0x03
++#define  UISUBCLASS_BOOT	1
++#define  UIPROTO_BOOT_KEYBOARD	1
++
++#define UICLASS_PHYSICAL	0x05
++
++#define UICLASS_IMAGE		0x06
++
++#define UICLASS_PRINTER		0x07
++#define  UISUBCLASS_PRINTER	1
++#define  UIPROTO_PRINTER_UNI	1
++#define  UIPROTO_PRINTER_BI	2
++#define  UIPROTO_PRINTER_1284	3
++
++#define UICLASS_MASS		0x08
++#define  UISUBCLASS_RBC		1
++#define  UISUBCLASS_SFF8020I	2
++#define  UISUBCLASS_QIC157	3
++#define  UISUBCLASS_UFI		4
++#define  UISUBCLASS_SFF8070I	5
++#define  UISUBCLASS_SCSI	6
++#define  UIPROTO_MASS_CBI_I	0
++#define  UIPROTO_MASS_CBI	1
++#define  UIPROTO_MASS_BBB_OLD	2	/* Not in the spec anymore */
++#define  UIPROTO_MASS_BBB	80	/* 'P' for the Iomega Zip drive */
++
++#define UICLASS_HUB		0x09
++#define  UISUBCLASS_HUB		0
++#define  UIPROTO_FSHUB		0
++#define  UIPROTO_HSHUBSTT	0 /* Yes, same as previous */
++#define  UIPROTO_HSHUBMTT	1
++
++#define UICLASS_CDC_DATA	0x0a
++#define  UISUBCLASS_DATA		0
++#define   UIPROTO_DATA_ISDNBRI		0x30    /* Physical iface */
++#define   UIPROTO_DATA_HDLC		0x31    /* HDLC */
++#define   UIPROTO_DATA_TRANSPARENT	0x32    /* Transparent */
++#define   UIPROTO_DATA_Q921M		0x50    /* Management for Q921 */
++#define   UIPROTO_DATA_Q921		0x51    /* Data for Q921 */
++#define   UIPROTO_DATA_Q921TM		0x52    /* TEI multiplexer for Q921 */
++#define   UIPROTO_DATA_V42BIS		0x90    /* Data compression */
++#define   UIPROTO_DATA_Q931		0x91    /* Euro-ISDN */
++#define   UIPROTO_DATA_V120		0x92    /* V.24 rate adaption */
++#define   UIPROTO_DATA_CAPI		0x93    /* CAPI 2.0 commands */
++#define   UIPROTO_DATA_HOST_BASED	0xfd    /* Host based driver */
++#define   UIPROTO_DATA_PUF		0xfe    /* see Prot. Unit Func. Desc.*/
++#define   UIPROTO_DATA_VENDOR		0xff    /* Vendor specific */
++
++#define UICLASS_SMARTCARD	0x0b
++
++/*#define UICLASS_FIRM_UPD	0x0c*/
++
++#define UICLASS_SECURITY	0x0d
++
++#define UICLASS_DIAGNOSTIC	0xdc
++
++#define UICLASS_WIRELESS	0xe0
++#define  UISUBCLASS_RF			0x01
++#define   UIPROTO_BLUETOOTH		0x01
++
++#define UICLASS_APPL_SPEC	0xfe
++#define  UISUBCLASS_FIRMWARE_DOWNLOAD	1
++#define  UISUBCLASS_IRDA		2
++#define  UIPROTO_IRDA			0
++
++#define UICLASS_VENDOR		0xff
++
++#define USB_HUB_MAX_DEPTH 5
++
++/*
++ * Minimum time a device needs to be powered down to go through
++ * a power cycle.  XXX Are these time in the spec?
++ */
++#define USB_POWER_DOWN_TIME	200 /* ms */
++#define USB_PORT_POWER_DOWN_TIME	100 /* ms */
++
++#if 0
++/* These are the values from the spec. */
++#define USB_PORT_RESET_DELAY	10  /* ms */
++#define USB_PORT_ROOT_RESET_DELAY 50  /* ms */
++#define USB_PORT_RESET_RECOVERY	10  /* ms */
++#define USB_PORT_POWERUP_DELAY	100 /* ms */
++#define USB_SET_ADDRESS_SETTLE	2   /* ms */
++#define USB_RESUME_DELAY	(20*5)  /* ms */
++#define USB_RESUME_WAIT		10  /* ms */
++#define USB_RESUME_RECOVERY	10  /* ms */
++#define USB_EXTRA_POWER_UP_TIME	0   /* ms */
++#else
++/* Allow for marginal (i.e. non-conforming) devices. */
++#define USB_PORT_RESET_DELAY	50  /* ms */
++#define USB_PORT_ROOT_RESET_DELAY 250  /* ms */
++#define USB_PORT_RESET_RECOVERY	250  /* ms */
++#define USB_PORT_POWERUP_DELAY	300 /* ms */
++#define USB_SET_ADDRESS_SETTLE	10  /* ms */
++#define USB_RESUME_DELAY	(50*5)  /* ms */
++#define USB_RESUME_WAIT		50  /* ms */
++#define USB_RESUME_RECOVERY	50  /* ms */
++#define USB_EXTRA_POWER_UP_TIME	20  /* ms */
++#endif
++
++#define USB_MIN_POWER		100 /* mA */
++#define USB_MAX_POWER		500 /* mA */
++
++#define USB_BUS_RESET_DELAY	100 /* ms XXX?*/
++
++#define USB_UNCONFIG_NO 0
++#define USB_UNCONFIG_INDEX (-1)
++
++/*** ioctl() related stuff ***/
++
++struct usb_ctl_request {
++	int	ucr_addr;
++	usb_device_request_t ucr_request;
++	void	*ucr_data;
++	int	ucr_flags;
++#define USBD_SHORT_XFER_OK	0x04	/* allow short reads */
++	int	ucr_actlen;		/* actual length transferred */
++};
++
++struct usb_alt_interface {
++	int	uai_config_index;
++	int	uai_interface_index;
++	int	uai_alt_no;
++};
++
++#define USB_CURRENT_CONFIG_INDEX (-1)
++#define USB_CURRENT_ALT_INDEX (-1)
++
++struct usb_config_desc {
++	int	ucd_config_index;
++	usb_config_descriptor_t ucd_desc;
++};
++
++struct usb_interface_desc {
++	int	uid_config_index;
++	int	uid_interface_index;
++	int	uid_alt_index;
++	usb_interface_descriptor_t uid_desc;
++};
++
++struct usb_endpoint_desc {
++	int	ued_config_index;
++	int	ued_interface_index;
++	int	ued_alt_index;
++	int	ued_endpoint_index;
++	usb_endpoint_descriptor_t ued_desc;
++};
++
++struct usb_full_desc {
++	int	ufd_config_index;
++	u_int	ufd_size;
++	u_char	*ufd_data;
++};
++
++struct usb_string_desc {
++	int	usd_string_index;
++	int	usd_language_id;
++	usb_string_descriptor_t usd_desc;
++};
++
++struct usb_ctl_report_desc {
++	int	ucrd_size;
++	u_char	ucrd_data[1024];	/* filled data size will vary */
++};
++
++typedef struct { u_int32_t cookie; } usb_event_cookie_t;
++
++#define USB_MAX_DEVNAMES 4
++#define USB_MAX_DEVNAMELEN 16
++struct usb_device_info {
++	u_int8_t	udi_bus;
++	u_int8_t	udi_addr;	/* device address */
++	usb_event_cookie_t udi_cookie;
++	char		udi_product[USB_MAX_STRING_LEN];
++	char		udi_vendor[USB_MAX_STRING_LEN];
++	char		udi_release[8];
++	u_int16_t	udi_productNo;
++	u_int16_t	udi_vendorNo;
++	u_int16_t	udi_releaseNo;
++	u_int8_t	udi_class;
++	u_int8_t	udi_subclass;
++	u_int8_t	udi_protocol;
++	u_int8_t	udi_config;
++	u_int8_t	udi_speed;
++#define USB_SPEED_UNKNOWN	0
++#define USB_SPEED_LOW		1
++#define USB_SPEED_FULL		2
++#define USB_SPEED_HIGH		3
++#define USB_SPEED_VARIABLE	4
++#define USB_SPEED_SUPER		5
++	int		udi_power;	/* power consumption in mA, 0 if selfpowered */
++	int		udi_nports;
++	char		udi_devnames[USB_MAX_DEVNAMES][USB_MAX_DEVNAMELEN];
++	u_int8_t	udi_ports[16];/* hub only: addresses of devices on ports */
++#define USB_PORT_ENABLED 0xff
++#define USB_PORT_SUSPENDED 0xfe
++#define USB_PORT_POWERED 0xfd
++#define USB_PORT_DISABLED 0xfc
++};
++
++struct usb_ctl_report {
++	int	ucr_report;
++	u_char	ucr_data[1024];	/* filled data size will vary */
++};
++
++struct usb_device_stats {
++	u_long	uds_requests[4];	/* indexed by transfer type UE_* */
++};
++
++#define WUSB_MIN_IE			0x80
++#define WUSB_WCTA_IE			0x80
++#define WUSB_WCONNECTACK_IE		0x81
++#define WUSB_WHOSTINFO_IE		0x82
++#define  WUHI_GET_CA(_bmAttributes_) ((_bmAttributes_) & 0x3)
++#define   WUHI_CA_RECONN		0x00
++#define   WUHI_CA_LIMITED		0x01
++#define   WUHI_CA_ALL			0x03
++#define  WUHI_GET_MLSI(_bmAttributes_) (((_bmAttributes_) & 0x38) >> 3)
++#define WUSB_WCHCHANGEANNOUNCE_IE	0x83
++#define WUSB_WDEV_DISCONNECT_IE		0x84
++#define WUSB_WHOST_DISCONNECT_IE	0x85
++#define WUSB_WRELEASE_CHANNEL_IE	0x86
++#define WUSB_WWORK_IE			0x87
++#define WUSB_WCHANNEL_STOP_IE		0x88
++#define WUSB_WDEV_KEEPALIVE_IE		0x89
++#define WUSB_WISOCH_DISCARD_IE		0x8A
++#define WUSB_WRESETDEVICE_IE		0x8B
++#define WUSB_WXMIT_PACKET_ADJUST_IE	0x8C
++#define WUSB_MAX_IE			0x8C
++
++/* Device Notification Types */
++
++#define WUSB_DN_MIN			0x01
++#define WUSB_DN_CONNECT			0x01
++# define WUSB_DA_OLDCONN	0x00
++# define WUSB_DA_NEWCONN	0x01
++# define WUSB_DA_SELF_BEACON	0x02
++# define WUSB_DA_DIR_BEACON	0x04
++# define WUSB_DA_NO_BEACON	0x06
++#define WUSB_DN_DISCONNECT		0x02
++#define WUSB_DN_EPRDY			0x03
++#define WUSB_DN_MASAVAILCHANGED		0x04
++#define WUSB_DN_REMOTEWAKEUP		0x05
++#define WUSB_DN_SLEEP			0x06
++#define WUSB_DN_ALIVE			0x07
++#define WUSB_DN_MAX			0x07
++
++#ifdef _MSC_VER
++#include <pshpack1.h>
++#endif
++
++/* WUSB Handshake Data.  Used during the SET/GET HANDSHAKE requests */
++typedef struct wusb_hndshk_data {
++	uByte bMessageNumber;
++	uByte bStatus;
++	uByte tTKID[3];
++	uByte bReserved;
++	uByte CDID[16];
++	uByte Nonce[16];
++	uByte MIC[8];
++} UPACKED wusb_hndshk_data_t;
++#define WUSB_HANDSHAKE_LEN_FOR_MIC	38
++
++/* WUSB Connection Context */
++typedef struct wusb_conn_context {
++	uByte CHID [16];
++	uByte CDID [16];
++	uByte CK [16];
++} UPACKED wusb_conn_context_t;
++
++/* WUSB Security Descriptor */
++typedef struct wusb_security_desc {
++	uByte bLength;
++	uByte bDescriptorType;
++	uWord wTotalLength;
++	uByte bNumEncryptionTypes;
++} UPACKED wusb_security_desc_t;
++
++/* WUSB Encryption Type Descriptor */
++typedef struct wusb_encrypt_type_desc {
++	uByte bLength;
++	uByte bDescriptorType;
++
++	uByte bEncryptionType;
++#define WUETD_UNSECURE		0
++#define WUETD_WIRED		1
++#define WUETD_CCM_1		2
++#define WUETD_RSA_1		3
++
++	uByte bEncryptionValue;
++	uByte bAuthKeyIndex;
++} UPACKED wusb_encrypt_type_desc_t;
++
++/* WUSB Key Descriptor */
++typedef struct wusb_key_desc {
++	uByte bLength;
++	uByte bDescriptorType;
++	uByte tTKID[3];
++	uByte bReserved;
++	uByte KeyData[1];	/* variable length */
++} UPACKED wusb_key_desc_t;
++
++/* WUSB BOS Descriptor (Binary device Object Store) */
++typedef struct wusb_bos_desc {
++	uByte bLength;
++	uByte bDescriptorType;
++	uWord wTotalLength;
++	uByte bNumDeviceCaps;
++} UPACKED wusb_bos_desc_t;
++
++#define USB_DEVICE_CAPABILITY_20_EXTENSION	0x02
++typedef struct usb_dev_cap_20_ext_desc {
++	uByte bLength;
++	uByte bDescriptorType;
++	uByte bDevCapabilityType;
++#define USB_20_EXT_LPM				0x02
++	uDWord bmAttributes;
++} UPACKED usb_dev_cap_20_ext_desc_t;
++
++#define USB_DEVICE_CAPABILITY_SS_USB		0x03
++typedef struct usb_dev_cap_ss_usb {
++	uByte bLength;
++	uByte bDescriptorType;
++	uByte bDevCapabilityType;
++#define USB_DC_SS_USB_LTM_CAPABLE		0x02
++	uByte bmAttributes;
++#define USB_DC_SS_USB_SPEED_SUPPORT_LOW		0x01
++#define USB_DC_SS_USB_SPEED_SUPPORT_FULL	0x02
++#define USB_DC_SS_USB_SPEED_SUPPORT_HIGH	0x04
++#define USB_DC_SS_USB_SPEED_SUPPORT_SS		0x08
++	uWord wSpeedsSupported;
++	uByte bFunctionalitySupport;
++	uByte bU1DevExitLat;
++	uWord wU2DevExitLat;
++} UPACKED usb_dev_cap_ss_usb_t;
++
++#define USB_DEVICE_CAPABILITY_CONTAINER_ID	0x04
++typedef struct usb_dev_cap_container_id {
++	uByte bLength;
++	uByte bDescriptorType;
++	uByte bDevCapabilityType;
++	uByte bReserved;
++	uByte containerID[16];
++} UPACKED usb_dev_cap_container_id_t;
++
++/* Device Capability Type Codes */
++#define WUSB_DEVICE_CAPABILITY_WIRELESS_USB 0x01
++
++/* Device Capability Descriptor */
++typedef struct wusb_dev_cap_desc {
++	uByte bLength;
++	uByte bDescriptorType;
++	uByte bDevCapabilityType;
++	uByte caps[1];	/* Variable length */
++} UPACKED wusb_dev_cap_desc_t;
++
++/* Device Capability Descriptor */
++typedef struct wusb_dev_cap_uwb_desc {
++	uByte bLength;
++	uByte bDescriptorType;
++	uByte bDevCapabilityType;
++	uByte bmAttributes;
++	uWord wPHYRates;	/* Bitmap */
++	uByte bmTFITXPowerInfo;
++	uByte bmFFITXPowerInfo;
++	uWord bmBandGroup;
++	uByte bReserved;
++} UPACKED wusb_dev_cap_uwb_desc_t;
++
++/* Wireless USB Endpoint Companion Descriptor */
++typedef struct wusb_endpoint_companion_desc {
++	uByte bLength;
++	uByte bDescriptorType;
++	uByte bMaxBurst;
++	uByte bMaxSequence;
++	uWord wMaxStreamDelay;
++	uWord wOverTheAirPacketSize;
++	uByte bOverTheAirInterval;
++	uByte bmCompAttributes;
++} UPACKED wusb_endpoint_companion_desc_t;
++
++/* Wireless USB Numeric Association M1 Data Structure */
++typedef struct wusb_m1_data {
++	uByte version;
++	uWord langId;
++	uByte deviceFriendlyNameLength;
++	uByte sha_256_m3[32];
++	uByte deviceFriendlyName[256];
++} UPACKED wusb_m1_data_t;
++
++typedef struct wusb_m2_data {
++	uByte version;
++	uWord langId;
++	uByte hostFriendlyNameLength;
++	uByte pkh[384];
++	uByte hostFriendlyName[256];
++} UPACKED wusb_m2_data_t;
++
++typedef struct wusb_m3_data {
++	uByte pkd[384];
++	uByte nd;
++} UPACKED wusb_m3_data_t;
++
++typedef struct wusb_m4_data {
++	uDWord _attributeTypeIdAndLength_1;
++	uWord  associationTypeId;
++
++	uDWord _attributeTypeIdAndLength_2;
++	uWord  associationSubTypeId;
++
++	uDWord _attributeTypeIdAndLength_3;
++	uDWord length;
++
++	uDWord _attributeTypeIdAndLength_4;
++	uDWord associationStatus;
++
++	uDWord _attributeTypeIdAndLength_5;
++	uByte  chid[16];
++
++	uDWord _attributeTypeIdAndLength_6;
++	uByte  cdid[16];
++
++	uDWord _attributeTypeIdAndLength_7;
++	uByte  bandGroups[2];
++} UPACKED wusb_m4_data_t;
++
++#ifdef _MSC_VER
++#include <poppack.h>
++#endif
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _USB_H_ */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/doc/doxygen.cfg linux-raspberry-pi/drivers/usb/host/dwc_otg/doc/doxygen.cfg
+--- linux-3.12.6/drivers/usb/host/dwc_otg/doc/doxygen.cfg	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/doc/doxygen.cfg	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,224 @@
++# Doxyfile 1.3.9.1
++
++#---------------------------------------------------------------------------
++# Project related configuration options
++#---------------------------------------------------------------------------
++PROJECT_NAME           = "DesignWare USB 2.0 OTG Controller (DWC_otg) Device Driver"
++PROJECT_NUMBER         = v3.00a
++OUTPUT_DIRECTORY       = ./doc/
++CREATE_SUBDIRS         = NO
++OUTPUT_LANGUAGE        = English
++BRIEF_MEMBER_DESC      = YES
++REPEAT_BRIEF           = YES
++ABBREVIATE_BRIEF       = "The $name class" \
++                         "The $name widget" \
++                         "The $name file" \
++                         is \
++                         provides \
++                         specifies \
++                         contains \
++                         represents \
++                         a \
++                         an \
++                         the
++ALWAYS_DETAILED_SEC    = NO
++INLINE_INHERITED_MEMB  = NO
++FULL_PATH_NAMES        = NO
++STRIP_FROM_PATH        =
++STRIP_FROM_INC_PATH    =
++SHORT_NAMES            = NO
++JAVADOC_AUTOBRIEF      = YES
++MULTILINE_CPP_IS_BRIEF = NO
++INHERIT_DOCS           = YES
++DISTRIBUTE_GROUP_DOC   = NO
++TAB_SIZE               = 8
++ALIASES                =
++OPTIMIZE_OUTPUT_FOR_C  = YES
++OPTIMIZE_OUTPUT_JAVA   = NO
++SUBGROUPING            = YES
++#---------------------------------------------------------------------------
++# Build related configuration options
++#---------------------------------------------------------------------------
++EXTRACT_ALL            = NO
++EXTRACT_PRIVATE        = YES
++EXTRACT_STATIC         = YES
++EXTRACT_LOCAL_CLASSES  = YES
++EXTRACT_LOCAL_METHODS  = NO
++HIDE_UNDOC_MEMBERS     = NO
++HIDE_UNDOC_CLASSES     = NO
++HIDE_FRIEND_COMPOUNDS  = NO
++HIDE_IN_BODY_DOCS      = NO
++INTERNAL_DOCS          = NO
++CASE_SENSE_NAMES       = NO
++HIDE_SCOPE_NAMES       = NO
++SHOW_INCLUDE_FILES     = YES
++INLINE_INFO            = YES
++SORT_MEMBER_DOCS       = NO
++SORT_BRIEF_DOCS        = NO
++SORT_BY_SCOPE_NAME     = NO
++GENERATE_TODOLIST      = YES
++GENERATE_TESTLIST      = YES
++GENERATE_BUGLIST       = YES
++GENERATE_DEPRECATEDLIST= YES
++ENABLED_SECTIONS       =
++MAX_INITIALIZER_LINES  = 30
++SHOW_USED_FILES        = YES
++SHOW_DIRECTORIES       = YES
++#---------------------------------------------------------------------------
++# configuration options related to warning and progress messages
++#---------------------------------------------------------------------------
++QUIET                  = YES
++WARNINGS               = YES
++WARN_IF_UNDOCUMENTED   = NO
++WARN_IF_DOC_ERROR      = YES
++WARN_FORMAT            = "$file:$line: $text"
++WARN_LOGFILE           =
++#---------------------------------------------------------------------------
++# configuration options related to the input files
++#---------------------------------------------------------------------------
++INPUT                  = .
++FILE_PATTERNS          = *.c \
++                         *.h \
++                         ./linux/*.c \
++                         ./linux/*.h
++RECURSIVE              = NO
++EXCLUDE                = ./test/ \
++                         ./dwc_otg/.AppleDouble/
++EXCLUDE_SYMLINKS       = YES
++EXCLUDE_PATTERNS       = *.mod.*
++EXAMPLE_PATH           =
++EXAMPLE_PATTERNS       = *
++EXAMPLE_RECURSIVE      = NO
++IMAGE_PATH             =
++INPUT_FILTER           =
++FILTER_PATTERNS        =
++FILTER_SOURCE_FILES    = NO
++#---------------------------------------------------------------------------
++# configuration options related to source browsing
++#---------------------------------------------------------------------------
++SOURCE_BROWSER         = YES
++INLINE_SOURCES         = NO
++STRIP_CODE_COMMENTS    = YES
++REFERENCED_BY_RELATION = NO
++REFERENCES_RELATION    = NO
++VERBATIM_HEADERS       = NO
++#---------------------------------------------------------------------------
++# configuration options related to the alphabetical class index
++#---------------------------------------------------------------------------
++ALPHABETICAL_INDEX     = NO
++COLS_IN_ALPHA_INDEX    = 5
++IGNORE_PREFIX          =
++#---------------------------------------------------------------------------
++# configuration options related to the HTML output
++#---------------------------------------------------------------------------
++GENERATE_HTML          = YES
++HTML_OUTPUT            = html
++HTML_FILE_EXTENSION    = .html
++HTML_HEADER            =
++HTML_FOOTER            =
++HTML_STYLESHEET        =
++HTML_ALIGN_MEMBERS     = YES
++GENERATE_HTMLHELP      = NO
++CHM_FILE               =
++HHC_LOCATION           =
++GENERATE_CHI           = NO
++BINARY_TOC             = NO
++TOC_EXPAND             = NO
++DISABLE_INDEX          = NO
++ENUM_VALUES_PER_LINE   = 4
++GENERATE_TREEVIEW      = YES
++TREEVIEW_WIDTH         = 250
++#---------------------------------------------------------------------------
++# configuration options related to the LaTeX output
++#---------------------------------------------------------------------------
++GENERATE_LATEX         = NO
++LATEX_OUTPUT           = latex
++LATEX_CMD_NAME         = latex
++MAKEINDEX_CMD_NAME     = makeindex
++COMPACT_LATEX          = NO
++PAPER_TYPE             = a4wide
++EXTRA_PACKAGES         =
++LATEX_HEADER           =
++PDF_HYPERLINKS         = NO
++USE_PDFLATEX           = NO
++LATEX_BATCHMODE        = NO
++LATEX_HIDE_INDICES     = NO
++#---------------------------------------------------------------------------
++# configuration options related to the RTF output
++#---------------------------------------------------------------------------
++GENERATE_RTF           = NO
++RTF_OUTPUT             = rtf
++COMPACT_RTF            = NO
++RTF_HYPERLINKS         = NO
++RTF_STYLESHEET_FILE    =
++RTF_EXTENSIONS_FILE    =
++#---------------------------------------------------------------------------
++# configuration options related to the man page output
++#---------------------------------------------------------------------------
++GENERATE_MAN           = NO
++MAN_OUTPUT             = man
++MAN_EXTENSION          = .3
++MAN_LINKS              = NO
++#---------------------------------------------------------------------------
++# configuration options related to the XML output
++#---------------------------------------------------------------------------
++GENERATE_XML           = NO
++XML_OUTPUT             = xml
++XML_SCHEMA             =
++XML_DTD                =
++XML_PROGRAMLISTING     = YES
++#---------------------------------------------------------------------------
++# configuration options for the AutoGen Definitions output
++#---------------------------------------------------------------------------
++GENERATE_AUTOGEN_DEF   = NO
++#---------------------------------------------------------------------------
++# configuration options related to the Perl module output
++#---------------------------------------------------------------------------
++GENERATE_PERLMOD       = NO
++PERLMOD_LATEX          = NO
++PERLMOD_PRETTY         = YES
++PERLMOD_MAKEVAR_PREFIX =
++#---------------------------------------------------------------------------
++# Configuration options related to the preprocessor
++#---------------------------------------------------------------------------
++ENABLE_PREPROCESSING   = YES
++MACRO_EXPANSION        = YES
++EXPAND_ONLY_PREDEF     = YES
++SEARCH_INCLUDES        = YES
++INCLUDE_PATH           =
++INCLUDE_FILE_PATTERNS  =
++PREDEFINED             = DEVICE_ATTR DWC_EN_ISOC
++EXPAND_AS_DEFINED      = DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW DWC_OTG_DEVICE_ATTR_BITFIELD_STORE DWC_OTG_DEVICE_ATTR_BITFIELD_RW DWC_OTG_DEVICE_ATTR_BITFIELD_RO DWC_OTG_DEVICE_ATTR_REG_SHOW DWC_OTG_DEVICE_ATTR_REG_STORE DWC_OTG_DEVICE_ATTR_REG32_RW DWC_OTG_DEVICE_ATTR_REG32_RO DWC_EN_ISOC
++SKIP_FUNCTION_MACROS   = NO
++#---------------------------------------------------------------------------
++# Configuration::additions related to external references
++#---------------------------------------------------------------------------
++TAGFILES               =
++GENERATE_TAGFILE       =
++ALLEXTERNALS           = NO
++EXTERNAL_GROUPS        = YES
++PERL_PATH              = /usr/bin/perl
++#---------------------------------------------------------------------------
++# Configuration options related to the dot tool
++#---------------------------------------------------------------------------
++CLASS_DIAGRAMS         = YES
++HIDE_UNDOC_RELATIONS   = YES
++HAVE_DOT               = NO
++CLASS_GRAPH            = YES
++COLLABORATION_GRAPH    = YES
++UML_LOOK               = NO
++TEMPLATE_RELATIONS     = NO
++INCLUDE_GRAPH          = YES
++INCLUDED_BY_GRAPH      = YES
++CALL_GRAPH             = NO
++GRAPHICAL_HIERARCHY    = YES
++DOT_IMAGE_FORMAT       = png
++DOT_PATH               =
++DOTFILE_DIRS           =
++MAX_DOT_GRAPH_DEPTH    = 1000
++GENERATE_LEGEND        = YES
++DOT_CLEANUP            = YES
++#---------------------------------------------------------------------------
++# Configuration::additions related to the search engine
++#---------------------------------------------------------------------------
++SEARCHENGINE           = NO
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dummy_audio.c linux-raspberry-pi/drivers/usb/host/dwc_otg/dummy_audio.c
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dummy_audio.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dummy_audio.c	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,1575 @@
++/*
++ * zero.c -- Gadget Zero, for USB development
++ *
++ * Copyright (C) 2003-2004 David Brownell
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") as published by the Free Software
++ * Foundation, either version 2 of that License or (at your option) any
++ * later version.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++
++/*
++ * Gadget Zero only needs two bulk endpoints, and is an example of how you
++ * can write a hardware-agnostic gadget driver running inside a USB device.
++ *
++ * Hardware details are visible (see CONFIG_USB_ZERO_* below) but don't
++ * affect most of the driver.
++ *
++ * Use it with the Linux host/master side "usbtest" driver to get a basic
++ * functional test of your device-side usb stack, or with "usb-skeleton".
++ *
++ * It supports two similar configurations.  One sinks whatever the usb host
++ * writes, and in return sources zeroes.  The other loops whatever the host
++ * writes back, so the host can read it.  Module options include:
++ *
++ *   buflen=N		default N=4096, buffer size used
++ *   qlen=N		default N=32, how many buffers in the loopback queue
++ *   loopdefault	default false, list loopback config first
++ *
++ * Many drivers will only have one configuration, letting them be much
++ * simpler if they also don't support high speed operation (like this
++ * driver does).
++ */
++
++#include <linux/config.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/delay.h>
++#include <linux/ioport.h>
++#include <linux/sched.h>
++#include <linux/slab.h>
++#include <linux/smp_lock.h>
++#include <linux/errno.h>
++#include <linux/init.h>
++#include <linux/timer.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/uts.h>
++#include <linux/version.h>
++#include <linux/device.h>
++#include <linux/moduleparam.h>
++#include <linux/proc_fs.h>
++
++#include <asm/byteorder.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/system.h>
++#include <asm/unaligned.h>
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
++# include <linux/usb/ch9.h>
++#else
++# include <linux/usb_ch9.h>
++#endif
++
++#include <linux/usb_gadget.h>
++
++
++/*-------------------------------------------------------------------------*/
++/*-------------------------------------------------------------------------*/
++
++
++static int utf8_to_utf16le(const char *s, u16 *cp, unsigned len)
++{
++	int	count = 0;
++	u8	c;
++	u16	uchar;
++
++	/* this insists on correct encodings, though not minimal ones.
++	 * BUT it currently rejects legit 4-byte UTF-8 code points,
++	 * which need surrogate pairs.  (Unicode 3.1 can use them.)
++	 */
++	while (len != 0 && (c = (u8) *s++) != 0) {
++		if (unlikely(c & 0x80)) {
++			// 2-byte sequence:
++			// 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
++			if ((c & 0xe0) == 0xc0) {
++				uchar = (c & 0x1f) << 6;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c;
++
++			// 3-byte sequence (most CJKV characters):
++			// zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
++			} else if ((c & 0xf0) == 0xe0) {
++				uchar = (c & 0x0f) << 12;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c << 6;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c;
++
++				/* no bogus surrogates */
++				if (0xd800 <= uchar && uchar <= 0xdfff)
++					goto fail;
++
++			// 4-byte sequence (surrogate pairs, currently rare):
++			// 11101110wwwwzzzzyy + 110111yyyyxxxxxx
++			//     = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
++			// (uuuuu = wwww + 1)
++			// FIXME accept the surrogate code points (only)
++
++			} else
++				goto fail;
++		} else
++			uchar = c;
++		put_unaligned (cpu_to_le16 (uchar), cp++);
++		count++;
++		len--;
++	}
++	return count;
++fail:
++	return -1;
++}
++
++
++/**
++ * usb_gadget_get_string - fill out a string descriptor
++ * @table: of c strings encoded using UTF-8
++ * @id: string id, from low byte of wValue in get string descriptor
++ * @buf: at least 256 bytes
++ *
++ * Finds the UTF-8 string matching the ID, and converts it into a
++ * string descriptor in utf16-le.
++ * Returns length of descriptor (always even) or negative errno
++ *
++ * If your driver needs stings in multiple languages, you'll probably
++ * "switch (wIndex) { ... }"  in your ep0 string descriptor logic,
++ * using this routine after choosing which set of UTF-8 strings to use.
++ * Note that US-ASCII is a strict subset of UTF-8; any string bytes with
++ * the eighth bit set will be multibyte UTF-8 characters, not ISO-8859/1
++ * characters (which are also widely used in C strings).
++ */
++int
++usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf)
++{
++	struct usb_string	*s;
++	int			len;
++
++	/* descriptor 0 has the language id */
++	if (id == 0) {
++		buf [0] = 4;
++		buf [1] = USB_DT_STRING;
++		buf [2] = (u8) table->language;
++		buf [3] = (u8) (table->language >> 8);
++		return 4;
++	}
++	for (s = table->strings; s && s->s; s++)
++		if (s->id == id)
++			break;
++
++	/* unrecognized: stall. */
++	if (!s || !s->s)
++		return -EINVAL;
++
++	/* string descriptors have length, tag, then UTF16-LE text */
++	len = min ((size_t) 126, strlen (s->s));
++	memset (buf + 2, 0, 2 * len);	/* zero all the bytes */
++	len = utf8_to_utf16le(s->s, (u16 *)&buf[2], len);
++	if (len < 0)
++		return -EINVAL;
++	buf [0] = (len + 1) * 2;
++	buf [1] = USB_DT_STRING;
++	return buf [0];
++}
++
++
++/*-------------------------------------------------------------------------*/
++/*-------------------------------------------------------------------------*/
++
++
++/**
++ * usb_descriptor_fillbuf - fill buffer with descriptors
++ * @buf: Buffer to be filled
++ * @buflen: Size of buf
++ * @src: Array of descriptor pointers, terminated by null pointer.
++ *
++ * Copies descriptors into the buffer, returning the length or a
++ * negative error code if they can't all be copied.  Useful when
++ * assembling descriptors for an associated set of interfaces used
++ * as part of configuring a composite device; or in other cases where
++ * sets of descriptors need to be marshaled.
++ */
++int
++usb_descriptor_fillbuf(void *buf, unsigned buflen,
++		const struct usb_descriptor_header **src)
++{
++	u8	*dest = buf;
++
++	if (!src)
++		return -EINVAL;
++
++	/* fill buffer from src[] until null descriptor ptr */
++	for (; 0 != *src; src++) {
++		unsigned		len = (*src)->bLength;
++
++		if (len > buflen)
++			return -EINVAL;
++		memcpy(dest, *src, len);
++		buflen -= len;
++		dest += len;
++	}
++	return dest - (u8 *)buf;
++}
++
++
++/**
++ * usb_gadget_config_buf - builts a complete configuration descriptor
++ * @config: Header for the descriptor, including characteristics such
++ *	as power requirements and number of interfaces.
++ * @desc: Null-terminated vector of pointers to the descriptors (interface,
++ *	endpoint, etc) defining all functions in this device configuration.
++ * @buf: Buffer for the resulting configuration descriptor.
++ * @length: Length of buffer.  If this is not big enough to hold the
++ *	entire configuration descriptor, an error code will be returned.
++ *
++ * This copies descriptors into the response buffer, building a descriptor
++ * for that configuration.  It returns the buffer length or a negative
++ * status code.  The config.wTotalLength field is set to match the length
++ * of the result, but other descriptor fields (including power usage and
++ * interface count) must be set by the caller.
++ *
++ * Gadget drivers could use this when constructing a config descriptor
++ * in response to USB_REQ_GET_DESCRIPTOR.  They will need to patch the
++ * resulting bDescriptorType value if USB_DT_OTHER_SPEED_CONFIG is needed.
++ */
++int usb_gadget_config_buf(
++	const struct usb_config_descriptor	*config,
++	void					*buf,
++	unsigned				length,
++	const struct usb_descriptor_header	**desc
++)
++{
++	struct usb_config_descriptor		*cp = buf;
++	int					len;
++
++	/* config descriptor first */
++	if (length < USB_DT_CONFIG_SIZE || !desc)
++		return -EINVAL;
++	*cp = *config;
++
++	/* then interface/endpoint/class/vendor/... */
++	len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf,
++			length - USB_DT_CONFIG_SIZE, desc);
++	if (len < 0)
++		return len;
++	len += USB_DT_CONFIG_SIZE;
++	if (len > 0xffff)
++		return -EINVAL;
++
++	/* patch up the config descriptor */
++	cp->bLength = USB_DT_CONFIG_SIZE;
++	cp->bDescriptorType = USB_DT_CONFIG;
++	cp->wTotalLength = cpu_to_le16(len);
++	cp->bmAttributes |= USB_CONFIG_ATT_ONE;
++	return len;
++}
++
++/*-------------------------------------------------------------------------*/
++/*-------------------------------------------------------------------------*/
++
++
++#define RBUF_LEN (1024*1024)
++static int rbuf_start;
++static int rbuf_len;
++static __u8 rbuf[RBUF_LEN];
++
++/*-------------------------------------------------------------------------*/
++
++#define DRIVER_VERSION		"St Patrick's Day 2004"
++
++static const char shortname [] = "zero";
++static const char longname [] = "YAMAHA YST-MS35D USB Speaker  ";
++
++static const char source_sink [] = "source and sink data";
++static const char loopback [] = "loop input to output";
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * driver assumes self-powered hardware, and
++ * has no way for users to trigger remote wakeup.
++ *
++ * this version autoconfigures as much as possible,
++ * which is reasonable for most "bulk-only" drivers.
++ */
++static const char *EP_IN_NAME;		/* source */
++static const char *EP_OUT_NAME;		/* sink */
++
++/*-------------------------------------------------------------------------*/
++
++/* big enough to hold our biggest descriptor */
++#define USB_BUFSIZ	512
++
++struct zero_dev {
++	spinlock_t		lock;
++	struct usb_gadget	*gadget;
++	struct usb_request	*req;		/* for control responses */
++
++	/* when configured, we have one of two configs:
++	 * - source data (in to host) and sink it (out from host)
++	 * - or loop it back (out from host back in to host)
++	 */
++	u8			config;
++	struct usb_ep		*in_ep, *out_ep;
++
++	/* autoresume timer */
++	struct timer_list	resume;
++};
++
++#define xprintk(d,level,fmt,args...) \
++	dev_printk(level , &(d)->gadget->dev , fmt , ## args)
++
++#ifdef DEBUG
++#define DBG(dev,fmt,args...) \
++	xprintk(dev , KERN_DEBUG , fmt , ## args)
++#else
++#define DBG(dev,fmt,args...) \
++	do { } while (0)
++#endif /* DEBUG */
++
++#ifdef VERBOSE
++#define VDBG	DBG
++#else
++#define VDBG(dev,fmt,args...) \
++	do { } while (0)
++#endif /* VERBOSE */
++
++#define ERROR(dev,fmt,args...) \
++	xprintk(dev , KERN_ERR , fmt , ## args)
++#define WARN(dev,fmt,args...) \
++	xprintk(dev , KERN_WARNING , fmt , ## args)
++#define INFO(dev,fmt,args...) \
++	xprintk(dev , KERN_INFO , fmt , ## args)
++
++/*-------------------------------------------------------------------------*/
++
++static unsigned buflen = 4096;
++static unsigned qlen = 32;
++static unsigned pattern = 0;
++
++module_param (buflen, uint, S_IRUGO|S_IWUSR);
++module_param (qlen, uint, S_IRUGO|S_IWUSR);
++module_param (pattern, uint, S_IRUGO|S_IWUSR);
++
++/*
++ * if it's nonzero, autoresume says how many seconds to wait
++ * before trying to wake up the host after suspend.
++ */
++static unsigned autoresume = 0;
++module_param (autoresume, uint, 0);
++
++/*
++ * Normally the "loopback" configuration is second (index 1) so
++ * it's not the default.  Here's where to change that order, to
++ * work better with hosts where config changes are problematic.
++ * Or controllers (like superh) that only support one config.
++ */
++static int loopdefault = 0;
++
++module_param (loopdefault, bool, S_IRUGO|S_IWUSR);
++
++/*-------------------------------------------------------------------------*/
++
++/* Thanks to NetChip Technologies for donating this product ID.
++ *
++ * DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
++ * Instead:  allocate your own, using normal USB-IF procedures.
++ */
++#ifndef	CONFIG_USB_ZERO_HNPTEST
++#define DRIVER_VENDOR_NUM	0x0525		/* NetChip */
++#define DRIVER_PRODUCT_NUM	0xa4a0		/* Linux-USB "Gadget Zero" */
++#else
++#define DRIVER_VENDOR_NUM	0x1a0a		/* OTG test device IDs */
++#define DRIVER_PRODUCT_NUM	0xbadd
++#endif
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * DESCRIPTORS ... most are static, but strings and (full)
++ * configuration descriptors are built on demand.
++ */
++
++/*
++#define STRING_MANUFACTURER		25
++#define STRING_PRODUCT			42
++#define STRING_SERIAL			101
++*/
++#define STRING_MANUFACTURER		1
++#define STRING_PRODUCT			2
++#define STRING_SERIAL			3
++
++#define STRING_SOURCE_SINK		250
++#define STRING_LOOPBACK			251
++
++/*
++ * This device advertises two configurations; these numbers work
++ * on a pxa250 as well as more flexible hardware.
++ */
++#define	CONFIG_SOURCE_SINK	3
++#define	CONFIG_LOOPBACK		2
++
++/*
++static struct usb_device_descriptor
++device_desc = {
++	.bLength =		sizeof device_desc,
++	.bDescriptorType =	USB_DT_DEVICE,
++
++	.bcdUSB =		__constant_cpu_to_le16 (0x0200),
++	.bDeviceClass =		USB_CLASS_VENDOR_SPEC,
++
++	.idVendor =		__constant_cpu_to_le16 (DRIVER_VENDOR_NUM),
++	.idProduct =		__constant_cpu_to_le16 (DRIVER_PRODUCT_NUM),
++	.iManufacturer =	STRING_MANUFACTURER,
++	.iProduct =		STRING_PRODUCT,
++	.iSerialNumber =	STRING_SERIAL,
++	.bNumConfigurations =	2,
++};
++*/
++static struct usb_device_descriptor
++device_desc = {
++	.bLength =		sizeof device_desc,
++	.bDescriptorType =	USB_DT_DEVICE,
++	.bcdUSB =		__constant_cpu_to_le16 (0x0100),
++	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
++	.bDeviceSubClass =      0,
++	.bDeviceProtocol =      0,
++	.bMaxPacketSize0 =      64,
++	.bcdDevice =            __constant_cpu_to_le16 (0x0100),
++	.idVendor =		__constant_cpu_to_le16 (0x0499),
++	.idProduct =		__constant_cpu_to_le16 (0x3002),
++	.iManufacturer =	STRING_MANUFACTURER,
++	.iProduct =		STRING_PRODUCT,
++	.iSerialNumber =	STRING_SERIAL,
++	.bNumConfigurations =	1,
++};
++
++static struct usb_config_descriptor
++z_config = {
++	.bLength =		sizeof z_config,
++	.bDescriptorType =	USB_DT_CONFIG,
++
++	/* compute wTotalLength on the fly */
++	.bNumInterfaces =	2,
++	.bConfigurationValue =	1,
++	.iConfiguration =	0,
++	.bmAttributes =		0x40,
++	.bMaxPower =		0,	/* self-powered */
++};
++
++
++static struct usb_otg_descriptor
++otg_descriptor = {
++	.bLength =		sizeof otg_descriptor,
++	.bDescriptorType =	USB_DT_OTG,
++
++	.bmAttributes =		USB_OTG_SRP,
++};
++
++/* one interface in each configuration */
++#ifdef	CONFIG_USB_GADGET_DUALSPEED
++
++/*
++ * usb 2.0 devices need to expose both high speed and full speed
++ * descriptors, unless they only run at full speed.
++ *
++ * that means alternate endpoint descriptors (bigger packets)
++ * and a "device qualifier" ... plus more construction options
++ * for the config descriptor.
++ */
++
++static struct usb_qualifier_descriptor
++dev_qualifier = {
++	.bLength =		sizeof dev_qualifier,
++	.bDescriptorType =	USB_DT_DEVICE_QUALIFIER,
++
++	.bcdUSB =		__constant_cpu_to_le16 (0x0200),
++	.bDeviceClass =		USB_CLASS_VENDOR_SPEC,
++
++	.bNumConfigurations =	2,
++};
++
++
++struct usb_cs_as_general_descriptor {
++	__u8  bLength;
++	__u8  bDescriptorType;
++
++	__u8  bDescriptorSubType;
++	__u8  bTerminalLink;
++	__u8  bDelay;
++	__u16  wFormatTag;
++} __attribute__ ((packed));
++
++struct usb_cs_as_format_descriptor {
++	__u8  bLength;
++	__u8  bDescriptorType;
++
++	__u8  bDescriptorSubType;
++	__u8  bFormatType;
++	__u8  bNrChannels;
++	__u8  bSubframeSize;
++	__u8  bBitResolution;
++	__u8  bSamfreqType;
++	__u8  tLowerSamFreq[3];
++	__u8  tUpperSamFreq[3];
++} __attribute__ ((packed));
++
++static const struct usb_interface_descriptor
++z_audio_control_if_desc = {
++	.bLength =		sizeof z_audio_control_if_desc,
++	.bDescriptorType =	USB_DT_INTERFACE,
++	.bInterfaceNumber = 0,
++	.bAlternateSetting = 0,
++	.bNumEndpoints = 0,
++	.bInterfaceClass = USB_CLASS_AUDIO,
++	.bInterfaceSubClass = 0x1,
++	.bInterfaceProtocol = 0,
++	.iInterface = 0,
++};
++
++static const struct usb_interface_descriptor
++z_audio_if_desc = {
++	.bLength =		sizeof z_audio_if_desc,
++	.bDescriptorType =	USB_DT_INTERFACE,
++	.bInterfaceNumber = 1,
++	.bAlternateSetting = 0,
++	.bNumEndpoints = 0,
++	.bInterfaceClass = USB_CLASS_AUDIO,
++	.bInterfaceSubClass = 0x2,
++	.bInterfaceProtocol = 0,
++	.iInterface = 0,
++};
++
++static const struct usb_interface_descriptor
++z_audio_if_desc2 = {
++	.bLength =		sizeof z_audio_if_desc,
++	.bDescriptorType =	USB_DT_INTERFACE,
++	.bInterfaceNumber = 1,
++	.bAlternateSetting = 1,
++	.bNumEndpoints = 1,
++	.bInterfaceClass = USB_CLASS_AUDIO,
++	.bInterfaceSubClass = 0x2,
++	.bInterfaceProtocol = 0,
++	.iInterface = 0,
++};
++
++static const struct usb_cs_as_general_descriptor
++z_audio_cs_as_if_desc = {
++	.bLength = 7,
++	.bDescriptorType = 0x24,
++
++	.bDescriptorSubType = 0x01,
++	.bTerminalLink = 0x01,
++	.bDelay = 0x0,
++	.wFormatTag = __constant_cpu_to_le16 (0x0001)
++};
++
++
++static const struct usb_cs_as_format_descriptor
++z_audio_cs_as_format_desc = {
++	.bLength = 0xe,
++	.bDescriptorType = 0x24,
++
++	.bDescriptorSubType = 2,
++	.bFormatType = 1,
++	.bNrChannels = 1,
++	.bSubframeSize = 1,
++	.bBitResolution = 8,
++	.bSamfreqType = 0,
++	.tLowerSamFreq = {0x7e, 0x13, 0x00},
++	.tUpperSamFreq = {0xe2, 0xd6, 0x00},
++};
++
++static const struct usb_endpoint_descriptor
++z_iso_ep = {
++	.bLength = 0x09,
++	.bDescriptorType = 0x05,
++	.bEndpointAddress = 0x04,
++	.bmAttributes = 0x09,
++	.wMaxPacketSize = 0x0038,
++	.bInterval = 0x01,
++	.bRefresh = 0x00,
++	.bSynchAddress = 0x00,
++};
++
++static char z_iso_ep2[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++// 9 bytes
++static char z_ac_interface_header_desc[] =
++{ 0x09, 0x24, 0x01, 0x00, 0x01, 0x2b, 0x00, 0x01, 0x01 };
++
++// 12 bytes
++static char z_0[] = {0x0c, 0x24, 0x02, 0x01, 0x01, 0x01, 0x00, 0x02,
++		     0x03, 0x00, 0x00, 0x00};
++// 13 bytes
++static char z_1[] = {0x0d, 0x24, 0x06, 0x02, 0x01, 0x02, 0x15, 0x00,
++		     0x02, 0x00, 0x02, 0x00, 0x00};
++// 9 bytes
++static char z_2[] = {0x09, 0x24, 0x03, 0x03, 0x01, 0x03, 0x00, 0x02,
++		     0x00};
++
++static char za_0[] = {0x09, 0x04, 0x01, 0x02, 0x01, 0x01, 0x02, 0x00,
++		      0x00};
++
++static char za_1[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
++
++static char za_2[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x01, 0x08, 0x00,
++		      0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
++
++static char za_3[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00,
++		      0x00};
++
++static char za_4[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++static char za_5[] = {0x09, 0x04, 0x01, 0x03, 0x01, 0x01, 0x02, 0x00,
++		      0x00};
++
++static char za_6[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
++
++static char za_7[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x02, 0x10, 0x00,
++		      0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
++
++static char za_8[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00,
++		      0x00};
++
++static char za_9[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++static char za_10[] = {0x09, 0x04, 0x01, 0x04, 0x01, 0x01, 0x02, 0x00,
++		       0x00};
++
++static char za_11[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
++
++static char za_12[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x02, 0x10, 0x00,
++		       0x73, 0x13, 0x00, 0xe2, 0xd6, 0x00};
++
++static char za_13[] = {0x09, 0x05, 0x04, 0x09, 0xe0, 0x00, 0x01, 0x00,
++		       0x00};
++
++static char za_14[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++static char za_15[] = {0x09, 0x04, 0x01, 0x05, 0x01, 0x01, 0x02, 0x00,
++		       0x00};
++
++static char za_16[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
++
++static char za_17[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x03, 0x14, 0x00,
++		       0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
++
++static char za_18[] = {0x09, 0x05, 0x04, 0x09, 0xa8, 0x00, 0x01, 0x00,
++		       0x00};
++
++static char za_19[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++static char za_20[] = {0x09, 0x04, 0x01, 0x06, 0x01, 0x01, 0x02, 0x00,
++		       0x00};
++
++static char za_21[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
++
++static char za_22[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x03, 0x14, 0x00,
++		       0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
++
++static char za_23[] = {0x09, 0x05, 0x04, 0x09, 0x50, 0x01, 0x01, 0x00,
++		       0x00};
++
++static char za_24[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++
++
++static const struct usb_descriptor_header *z_function [] = {
++	(struct usb_descriptor_header *) &z_audio_control_if_desc,
++	(struct usb_descriptor_header *) &z_ac_interface_header_desc,
++	(struct usb_descriptor_header *) &z_0,
++	(struct usb_descriptor_header *) &z_1,
++	(struct usb_descriptor_header *) &z_2,
++	(struct usb_descriptor_header *) &z_audio_if_desc,
++	(struct usb_descriptor_header *) &z_audio_if_desc2,
++	(struct usb_descriptor_header *) &z_audio_cs_as_if_desc,
++	(struct usb_descriptor_header *) &z_audio_cs_as_format_desc,
++	(struct usb_descriptor_header *) &z_iso_ep,
++	(struct usb_descriptor_header *) &z_iso_ep2,
++	(struct usb_descriptor_header *) &za_0,
++	(struct usb_descriptor_header *) &za_1,
++	(struct usb_descriptor_header *) &za_2,
++	(struct usb_descriptor_header *) &za_3,
++	(struct usb_descriptor_header *) &za_4,
++	(struct usb_descriptor_header *) &za_5,
++	(struct usb_descriptor_header *) &za_6,
++	(struct usb_descriptor_header *) &za_7,
++	(struct usb_descriptor_header *) &za_8,
++	(struct usb_descriptor_header *) &za_9,
++	(struct usb_descriptor_header *) &za_10,
++	(struct usb_descriptor_header *) &za_11,
++	(struct usb_descriptor_header *) &za_12,
++	(struct usb_descriptor_header *) &za_13,
++	(struct usb_descriptor_header *) &za_14,
++	(struct usb_descriptor_header *) &za_15,
++	(struct usb_descriptor_header *) &za_16,
++	(struct usb_descriptor_header *) &za_17,
++	(struct usb_descriptor_header *) &za_18,
++	(struct usb_descriptor_header *) &za_19,
++	(struct usb_descriptor_header *) &za_20,
++	(struct usb_descriptor_header *) &za_21,
++	(struct usb_descriptor_header *) &za_22,
++	(struct usb_descriptor_header *) &za_23,
++	(struct usb_descriptor_header *) &za_24,
++	NULL,
++};
++
++/* maxpacket and other transfer characteristics vary by speed. */
++#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs))
++
++#else
++
++/* if there's no high speed support, maxpacket doesn't change. */
++#define ep_desc(g,hs,fs) fs
++
++#endif	/* !CONFIG_USB_GADGET_DUALSPEED */
++
++static char				manufacturer [40];
++//static char				serial [40];
++static char				serial [] = "Ser 00 em";
++
++/* static strings, in UTF-8 */
++static struct usb_string		strings [] = {
++	{ STRING_MANUFACTURER, manufacturer, },
++	{ STRING_PRODUCT, longname, },
++	{ STRING_SERIAL, serial, },
++	{ STRING_LOOPBACK, loopback, },
++	{ STRING_SOURCE_SINK, source_sink, },
++	{  }			/* end of list */
++};
++
++static struct usb_gadget_strings	stringtab = {
++	.language	= 0x0409,	/* en-us */
++	.strings	= strings,
++};
++
++/*
++ * config descriptors are also handcrafted.  these must agree with code
++ * that sets configurations, and with code managing interfaces and their
++ * altsettings.  other complexity may come from:
++ *
++ *  - high speed support, including "other speed config" rules
++ *  - multiple configurations
++ *  - interfaces with alternate settings
++ *  - embedded class or vendor-specific descriptors
++ *
++ * this handles high speed, and has a second config that could as easily
++ * have been an alternate interface setting (on most hardware).
++ *
++ * NOTE:  to demonstrate (and test) more USB capabilities, this driver
++ * should include an altsetting to test interrupt transfers, including
++ * high bandwidth modes at high speed.  (Maybe work like Intel's test
++ * device?)
++ */
++static int
++config_buf (struct usb_gadget *gadget, u8 *buf, u8 type, unsigned index)
++{
++	int len;
++	const struct usb_descriptor_header **function;
++
++	function = z_function;
++	len = usb_gadget_config_buf (&z_config, buf, USB_BUFSIZ, function);
++	if (len < 0)
++		return len;
++	((struct usb_config_descriptor *) buf)->bDescriptorType = type;
++	return len;
++}
++
++/*-------------------------------------------------------------------------*/
++
++static struct usb_request *
++alloc_ep_req (struct usb_ep *ep, unsigned length)
++{
++	struct usb_request	*req;
++
++	req = usb_ep_alloc_request (ep, GFP_ATOMIC);
++	if (req) {
++		req->length = length;
++		req->buf = usb_ep_alloc_buffer (ep, length,
++				&req->dma, GFP_ATOMIC);
++		if (!req->buf) {
++			usb_ep_free_request (ep, req);
++			req = NULL;
++		}
++	}
++	return req;
++}
++
++static void free_ep_req (struct usb_ep *ep, struct usb_request *req)
++{
++	if (req->buf)
++		usb_ep_free_buffer (ep, req->buf, req->dma, req->length);
++	usb_ep_free_request (ep, req);
++}
++
++/*-------------------------------------------------------------------------*/
++
++/* optionally require specific source/sink data patterns  */
++
++static int
++check_read_data (
++	struct zero_dev		*dev,
++	struct usb_ep		*ep,
++	struct usb_request	*req
++)
++{
++	unsigned	i;
++	u8		*buf = req->buf;
++
++	for (i = 0; i < req->actual; i++, buf++) {
++		switch (pattern) {
++		/* all-zeroes has no synchronization issues */
++		case 0:
++			if (*buf == 0)
++				continue;
++			break;
++		/* mod63 stays in sync with short-terminated transfers,
++		 * or otherwise when host and gadget agree on how large
++		 * each usb transfer request should be.  resync is done
++		 * with set_interface or set_config.
++		 */
++		case 1:
++			if (*buf == (u8)(i % 63))
++				continue;
++			break;
++		}
++		ERROR (dev, "bad OUT byte, buf [%d] = %d\n", i, *buf);
++		usb_ep_set_halt (ep);
++		return -EINVAL;
++	}
++	return 0;
++}
++
++/*-------------------------------------------------------------------------*/
++
++static void zero_reset_config (struct zero_dev *dev)
++{
++	if (dev->config == 0)
++		return;
++
++	DBG (dev, "reset config\n");
++
++	/* just disable endpoints, forcing completion of pending i/o.
++	 * all our completion handlers free their requests in this case.
++	 */
++	if (dev->in_ep) {
++		usb_ep_disable (dev->in_ep);
++		dev->in_ep = NULL;
++	}
++	if (dev->out_ep) {
++		usb_ep_disable (dev->out_ep);
++		dev->out_ep = NULL;
++	}
++	dev->config = 0;
++	del_timer (&dev->resume);
++}
++
++#define _write(f, buf, sz) (f->f_op->write(f, buf, sz, &f->f_pos))
++
++static void
++zero_isoc_complete (struct usb_ep *ep, struct usb_request *req)
++{
++	struct zero_dev	*dev = ep->driver_data;
++	int		status = req->status;
++	int i, j;
++
++	switch (status) {
++
++	case 0: 			/* normal completion? */
++		//printk ("\nzero ---------------> isoc normal completion %d bytes\n", req->actual);
++		for (i=0, j=rbuf_start; i<req->actual; i++) {
++			//printk ("%02x ", ((__u8*)req->buf)[i]);
++			rbuf[j] = ((__u8*)req->buf)[i];
++			j++;
++			if (j >= RBUF_LEN) j=0;
++		}
++		rbuf_start = j;
++		//printk ("\n\n");
++
++		if (rbuf_len < RBUF_LEN) {
++			rbuf_len += req->actual;
++			if (rbuf_len > RBUF_LEN) {
++				rbuf_len = RBUF_LEN;
++			}
++		}
++
++		break;
++
++	/* this endpoint is normally active while we're configured */
++	case -ECONNABORTED: 		/* hardware forced ep reset */
++	case -ECONNRESET:		/* request dequeued */
++	case -ESHUTDOWN:		/* disconnect from host */
++		VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status,
++				req->actual, req->length);
++		if (ep == dev->out_ep)
++			check_read_data (dev, ep, req);
++		free_ep_req (ep, req);
++		return;
++
++	case -EOVERFLOW:		/* buffer overrun on read means that
++					 * we didn't provide a big enough
++					 * buffer.
++					 */
++	default:
++#if 1
++		DBG (dev, "%s complete --> %d, %d/%d\n", ep->name,
++				status, req->actual, req->length);
++#endif
++	case -EREMOTEIO:		/* short read */
++		break;
++	}
++
++	status = usb_ep_queue (ep, req, GFP_ATOMIC);
++	if (status) {
++		ERROR (dev, "kill %s:  resubmit %d bytes --> %d\n",
++				ep->name, req->length, status);
++		usb_ep_set_halt (ep);
++		/* FIXME recover later ... somehow */
++	}
++}
++
++static struct usb_request *
++zero_start_isoc_ep (struct usb_ep *ep, int gfp_flags)
++{
++	struct usb_request	*req;
++	int			status;
++
++	req = alloc_ep_req (ep, 512);
++	if (!req)
++		return NULL;
++
++	req->complete = zero_isoc_complete;
++
++	status = usb_ep_queue (ep, req, gfp_flags);
++	if (status) {
++		struct zero_dev	*dev = ep->driver_data;
++
++		ERROR (dev, "start %s --> %d\n", ep->name, status);
++		free_ep_req (ep, req);
++		req = NULL;
++	}
++
++	return req;
++}
++
++/* change our operational config.  this code must agree with the code
++ * that returns config descriptors, and altsetting code.
++ *
++ * it's also responsible for power management interactions. some
++ * configurations might not work with our current power sources.
++ *
++ * note that some device controller hardware will constrain what this
++ * code can do, perhaps by disallowing more than one configuration or
++ * by limiting configuration choices (like the pxa2xx).
++ */
++static int
++zero_set_config (struct zero_dev *dev, unsigned number, int gfp_flags)
++{
++	int			result = 0;
++	struct usb_gadget	*gadget = dev->gadget;
++	const struct usb_endpoint_descriptor	*d;
++	struct usb_ep		*ep;
++
++	if (number == dev->config)
++		return 0;
++
++	zero_reset_config (dev);
++
++	gadget_for_each_ep (ep, gadget) {
++
++		if (strcmp (ep->name, "ep4") == 0) {
++
++			d = (struct usb_endpoint_descripter *)&za_23; // isoc ep desc for audio i/f alt setting 6
++			result = usb_ep_enable (ep, d);
++
++			if (result == 0) {
++				ep->driver_data = dev;
++				dev->in_ep = ep;
++
++				if (zero_start_isoc_ep (ep, gfp_flags) != 0) {
++
++					dev->in_ep = ep;
++					continue;
++				}
++
++				usb_ep_disable (ep);
++				result = -EIO;
++			}
++		}
++
++	}
++
++	dev->config = number;
++	return result;
++}
++
++/*-------------------------------------------------------------------------*/
++
++static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req)
++{
++	if (req->status || req->actual != req->length)
++		DBG ((struct zero_dev *) ep->driver_data,
++				"setup complete --> %d, %d/%d\n",
++				req->status, req->actual, req->length);
++}
++
++/*
++ * The setup() callback implements all the ep0 functionality that's
++ * not handled lower down, in hardware or the hardware driver (like
++ * device and endpoint feature flags, and their status).  It's all
++ * housekeeping for the gadget function we're implementing.  Most of
++ * the work is in config-specific setup.
++ */
++static int
++zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
++{
++	struct zero_dev		*dev = get_gadget_data (gadget);
++	struct usb_request	*req = dev->req;
++	int			value = -EOPNOTSUPP;
++
++	/* usually this stores reply data in the pre-allocated ep0 buffer,
++	 * but config change events will reconfigure hardware.
++	 */
++	req->zero = 0;
++	switch (ctrl->bRequest) {
++
++	case USB_REQ_GET_DESCRIPTOR:
++
++		switch (ctrl->wValue >> 8) {
++
++		case USB_DT_DEVICE:
++			value = min (ctrl->wLength, (u16) sizeof device_desc);
++			memcpy (req->buf, &device_desc, value);
++			break;
++#ifdef CONFIG_USB_GADGET_DUALSPEED
++		case USB_DT_DEVICE_QUALIFIER:
++			if (!gadget->is_dualspeed)
++				break;
++			value = min (ctrl->wLength, (u16) sizeof dev_qualifier);
++			memcpy (req->buf, &dev_qualifier, value);
++			break;
++
++		case USB_DT_OTHER_SPEED_CONFIG:
++			if (!gadget->is_dualspeed)
++				break;
++			// FALLTHROUGH
++#endif /* CONFIG_USB_GADGET_DUALSPEED */
++		case USB_DT_CONFIG:
++			value = config_buf (gadget, req->buf,
++					ctrl->wValue >> 8,
++					ctrl->wValue & 0xff);
++			if (value >= 0)
++				value = min (ctrl->wLength, (u16) value);
++			break;
++
++		case USB_DT_STRING:
++			/* wIndex == language code.
++			 * this driver only handles one language, you can
++			 * add string tables for other languages, using
++			 * any UTF-8 characters
++			 */
++			value = usb_gadget_get_string (&stringtab,
++					ctrl->wValue & 0xff, req->buf);
++			if (value >= 0) {
++				value = min (ctrl->wLength, (u16) value);
++			}
++			break;
++		}
++		break;
++
++	/* currently two configs, two speeds */
++	case USB_REQ_SET_CONFIGURATION:
++		if (ctrl->bRequestType != 0)
++			goto unknown;
++
++		spin_lock (&dev->lock);
++		value = zero_set_config (dev, ctrl->wValue, GFP_ATOMIC);
++		spin_unlock (&dev->lock);
++		break;
++	case USB_REQ_GET_CONFIGURATION:
++		if (ctrl->bRequestType != USB_DIR_IN)
++			goto unknown;
++		*(u8 *)req->buf = dev->config;
++		value = min (ctrl->wLength, (u16) 1);
++		break;
++
++	/* until we add altsetting support, or other interfaces,
++	 * only 0/0 are possible.  pxa2xx only supports 0/0 (poorly)
++	 * and already killed pending endpoint I/O.
++	 */
++	case USB_REQ_SET_INTERFACE:
++
++		if (ctrl->bRequestType != USB_RECIP_INTERFACE)
++			goto unknown;
++		spin_lock (&dev->lock);
++		if (dev->config) {
++			u8		config = dev->config;
++
++			/* resets interface configuration, forgets about
++			 * previous transaction state (queued bufs, etc)
++			 * and re-inits endpoint state (toggle etc)
++			 * no response queued, just zero status == success.
++			 * if we had more than one interface we couldn't
++			 * use this "reset the config" shortcut.
++			 */
++			zero_reset_config (dev);
++			zero_set_config (dev, config, GFP_ATOMIC);
++			value = 0;
++		}
++		spin_unlock (&dev->lock);
++		break;
++	case USB_REQ_GET_INTERFACE:
++		if ((ctrl->bRequestType == 0x21) && (ctrl->wIndex == 0x02)) {
++			value = ctrl->wLength;
++			break;
++		}
++		else {
++			if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE))
++				goto unknown;
++			if (!dev->config)
++				break;
++			if (ctrl->wIndex != 0) {
++				value = -EDOM;
++				break;
++			}
++			*(u8 *)req->buf = 0;
++			value = min (ctrl->wLength, (u16) 1);
++		}
++		break;
++
++	/*
++	 * These are the same vendor-specific requests supported by
++	 * Intel's USB 2.0 compliance test devices.  We exceed that
++	 * device spec by allowing multiple-packet requests.
++	 */
++	case 0x5b:	/* control WRITE test -- fill the buffer */
++		if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR))
++			goto unknown;
++		if (ctrl->wValue || ctrl->wIndex)
++			break;
++		/* just read that many bytes into the buffer */
++		if (ctrl->wLength > USB_BUFSIZ)
++			break;
++		value = ctrl->wLength;
++		break;
++	case 0x5c:	/* control READ test -- return the buffer */
++		if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR))
++			goto unknown;
++		if (ctrl->wValue || ctrl->wIndex)
++			break;
++		/* expect those bytes are still in the buffer; send back */
++		if (ctrl->wLength > USB_BUFSIZ
++				|| ctrl->wLength != req->length)
++			break;
++		value = ctrl->wLength;
++		break;
++
++	case 0x01: // SET_CUR
++	case 0x02:
++	case 0x03:
++	case 0x04:
++	case 0x05:
++		value = ctrl->wLength;
++		break;
++	case 0x81:
++		switch (ctrl->wValue) {
++		case 0x0201:
++		case 0x0202:
++			((u8*)req->buf)[0] = 0x00;
++			((u8*)req->buf)[1] = 0xe3;
++			break;
++		case 0x0300:
++		case 0x0500:
++			((u8*)req->buf)[0] = 0x00;
++			break;
++		}
++		//((u8*)req->buf)[0] = 0x81;
++		//((u8*)req->buf)[1] = 0x81;
++		value = ctrl->wLength;
++		break;
++	case 0x82:
++		switch (ctrl->wValue) {
++		case 0x0201:
++		case 0x0202:
++			((u8*)req->buf)[0] = 0x00;
++			((u8*)req->buf)[1] = 0xc3;
++			break;
++		case 0x0300:
++		case 0x0500:
++			((u8*)req->buf)[0] = 0x00;
++			break;
++		}
++		//((u8*)req->buf)[0] = 0x82;
++		//((u8*)req->buf)[1] = 0x82;
++		value = ctrl->wLength;
++		break;
++	case 0x83:
++		switch (ctrl->wValue) {
++		case 0x0201:
++		case 0x0202:
++			((u8*)req->buf)[0] = 0x00;
++			((u8*)req->buf)[1] = 0x00;
++			break;
++		case 0x0300:
++			((u8*)req->buf)[0] = 0x60;
++			break;
++		case 0x0500:
++			((u8*)req->buf)[0] = 0x18;
++			break;
++		}
++		//((u8*)req->buf)[0] = 0x83;
++		//((u8*)req->buf)[1] = 0x83;
++		value = ctrl->wLength;
++		break;
++	case 0x84:
++		switch (ctrl->wValue) {
++		case 0x0201:
++		case 0x0202:
++			((u8*)req->buf)[0] = 0x00;
++			((u8*)req->buf)[1] = 0x01;
++			break;
++		case 0x0300:
++		case 0x0500:
++			((u8*)req->buf)[0] = 0x08;
++			break;
++		}
++		//((u8*)req->buf)[0] = 0x84;
++		//((u8*)req->buf)[1] = 0x84;
++		value = ctrl->wLength;
++		break;
++	case 0x85:
++		((u8*)req->buf)[0] = 0x85;
++		((u8*)req->buf)[1] = 0x85;
++		value = ctrl->wLength;
++		break;
++
++
++	default:
++unknown:
++		printk("unknown control req%02x.%02x v%04x i%04x l%d\n",
++			ctrl->bRequestType, ctrl->bRequest,
++			ctrl->wValue, ctrl->wIndex, ctrl->wLength);
++	}
++
++	/* respond with data transfer before status phase? */
++	if (value >= 0) {
++		req->length = value;
++		req->zero = value < ctrl->wLength
++				&& (value % gadget->ep0->maxpacket) == 0;
++		value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC);
++		if (value < 0) {
++			DBG (dev, "ep_queue < 0 --> %d\n", value);
++			req->status = 0;
++			zero_setup_complete (gadget->ep0, req);
++		}
++	}
++
++	/* device either stalls (value < 0) or reports success */
++	return value;
++}
++
++static void
++zero_disconnect (struct usb_gadget *gadget)
++{
++	struct zero_dev		*dev = get_gadget_data (gadget);
++	unsigned long		flags;
++
++	spin_lock_irqsave (&dev->lock, flags);
++	zero_reset_config (dev);
++
++	/* a more significant application might have some non-usb
++	 * activities to quiesce here, saving resources like power
++	 * or pushing the notification up a network stack.
++	 */
++	spin_unlock_irqrestore (&dev->lock, flags);
++
++	/* next we may get setup() calls to enumerate new connections;
++	 * or an unbind() during shutdown (including removing module).
++	 */
++}
++
++static void
++zero_autoresume (unsigned long _dev)
++{
++	struct zero_dev	*dev = (struct zero_dev *) _dev;
++	int		status;
++
++	/* normally the host would be woken up for something
++	 * more significant than just a timer firing...
++	 */
++	if (dev->gadget->speed != USB_SPEED_UNKNOWN) {
++		status = usb_gadget_wakeup (dev->gadget);
++		DBG (dev, "wakeup --> %d\n", status);
++	}
++}
++
++/*-------------------------------------------------------------------------*/
++
++static void
++zero_unbind (struct usb_gadget *gadget)
++{
++	struct zero_dev		*dev = get_gadget_data (gadget);
++
++	DBG (dev, "unbind\n");
++
++	/* we've already been disconnected ... no i/o is active */
++	if (dev->req)
++		free_ep_req (gadget->ep0, dev->req);
++	del_timer_sync (&dev->resume);
++	kfree (dev);
++	set_gadget_data (gadget, NULL);
++}
++
++static int
++zero_bind (struct usb_gadget *gadget)
++{
++	struct zero_dev		*dev;
++	//struct usb_ep		*ep;
++
++	printk("binding\n");
++	/*
++	 * DRIVER POLICY CHOICE:  you may want to do this differently.
++	 * One thing to avoid is reusing a bcdDevice revision code
++	 * with different host-visible configurations or behavior
++	 * restrictions -- using ep1in/ep2out vs ep1out/ep3in, etc
++	 */
++	//device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201);
++
++
++	/* ok, we made sense of the hardware ... */
++	dev = kmalloc (sizeof *dev, SLAB_KERNEL);
++	if (!dev)
++		return -ENOMEM;
++	memset (dev, 0, sizeof *dev);
++	spin_lock_init (&dev->lock);
++	dev->gadget = gadget;
++	set_gadget_data (gadget, dev);
++
++	/* preallocate control response and buffer */
++	dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL);
++	if (!dev->req)
++		goto enomem;
++	dev->req->buf = usb_ep_alloc_buffer (gadget->ep0, USB_BUFSIZ,
++				&dev->req->dma, GFP_KERNEL);
++	if (!dev->req->buf)
++		goto enomem;
++
++	dev->req->complete = zero_setup_complete;
++
++	device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
++
++#ifdef CONFIG_USB_GADGET_DUALSPEED
++	/* assume ep0 uses the same value for both speeds ... */
++	dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
++
++	/* and that all endpoints are dual-speed */
++	//hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress;
++	//hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress;
++#endif
++
++	usb_gadget_set_selfpowered (gadget);
++
++	init_timer (&dev->resume);
++	dev->resume.function = zero_autoresume;
++	dev->resume.data = (unsigned long) dev;
++
++	gadget->ep0->driver_data = dev;
++
++	INFO (dev, "%s, version: " DRIVER_VERSION "\n", longname);
++	INFO (dev, "using %s, OUT %s IN %s\n", gadget->name,
++		EP_OUT_NAME, EP_IN_NAME);
++
++	snprintf (manufacturer, sizeof manufacturer,
++		UTS_SYSNAME " " UTS_RELEASE " with %s",
++		gadget->name);
++
++	return 0;
++
++enomem:
++	zero_unbind (gadget);
++	return -ENOMEM;
++}
++
++/*-------------------------------------------------------------------------*/
++
++static void
++zero_suspend (struct usb_gadget *gadget)
++{
++	struct zero_dev		*dev = get_gadget_data (gadget);
++
++	if (gadget->speed == USB_SPEED_UNKNOWN)
++		return;
++
++	if (autoresume) {
++		mod_timer (&dev->resume, jiffies + (HZ * autoresume));
++		DBG (dev, "suspend, wakeup in %d seconds\n", autoresume);
++	} else
++		DBG (dev, "suspend\n");
++}
++
++static void
++zero_resume (struct usb_gadget *gadget)
++{
++	struct zero_dev		*dev = get_gadget_data (gadget);
++
++	DBG (dev, "resume\n");
++	del_timer (&dev->resume);
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static struct usb_gadget_driver zero_driver = {
++#ifdef CONFIG_USB_GADGET_DUALSPEED
++	.speed		= USB_SPEED_HIGH,
++#else
++	.speed		= USB_SPEED_FULL,
++#endif
++	.function	= (char *) longname,
++	.bind		= zero_bind,
++	.unbind		= zero_unbind,
++
++	.setup		= zero_setup,
++	.disconnect	= zero_disconnect,
++
++	.suspend	= zero_suspend,
++	.resume		= zero_resume,
++
++	.driver 	= {
++		.name		= (char *) shortname,
++		// .shutdown = ...
++		// .suspend = ...
++		// .resume = ...
++	},
++};
++
++MODULE_AUTHOR ("David Brownell");
++MODULE_LICENSE ("Dual BSD/GPL");
++
++static struct proc_dir_entry *pdir, *pfile;
++
++static int isoc_read_data (char *page, char **start,
++			   off_t off, int count,
++			   int *eof, void *data)
++{
++	int i;
++	static int c = 0;
++	static int done = 0;
++	static int s = 0;
++
++/*
++	printk ("\ncount: %d\n", count);
++	printk ("rbuf_start: %d\n", rbuf_start);
++	printk ("rbuf_len: %d\n", rbuf_len);
++	printk ("off: %d\n", off);
++	printk ("start: %p\n\n", *start);
++*/
++	if (done) {
++		c = 0;
++		done = 0;
++		*eof = 1;
++		return 0;
++	}
++
++	if (c == 0) {
++		if (rbuf_len == RBUF_LEN)
++			s = rbuf_start;
++		else s = 0;
++	}
++
++	for (i=0; i<count && c<rbuf_len; i++, c++) {
++		page[i] = rbuf[(c+s) % RBUF_LEN];
++	}
++	*start = page;
++
++	if (c >= rbuf_len) {
++		*eof = 1;
++		done = 1;
++	}
++
++
++	return i;
++}
++
++static int __init init (void)
++{
++
++	int retval = 0;
++
++	pdir = proc_mkdir("isoc_test", NULL);
++	if(pdir == NULL) {
++		retval = -ENOMEM;
++		printk("Error creating dir\n");
++		goto done;
++	}
++	pdir->owner = THIS_MODULE;
++
++	pfile = create_proc_read_entry("isoc_data",
++				       0444, pdir,
++				       isoc_read_data,
++				       NULL);
++	if (pfile == NULL) {
++		retval = -ENOMEM;
++		printk("Error creating file\n");
++		goto no_file;
++	}
++	pfile->owner = THIS_MODULE;
++
++	return usb_gadget_register_driver (&zero_driver);
++
++ no_file:
++	remove_proc_entry("isoc_data", NULL);
++ done:
++	return retval;
++}
++module_init (init);
++
++static void __exit cleanup (void)
++{
++
++	usb_gadget_unregister_driver (&zero_driver);
++
++	remove_proc_entry("isoc_data", pdir);
++	remove_proc_entry("isoc_test", NULL);
++}
++module_exit (cleanup);
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_cfi_common.h linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_cfi_common.h
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_cfi_common.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_cfi_common.h	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,142 @@
++/* ==========================================================================
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_CFI_COMMON_H__)
++#define __DWC_CFI_COMMON_H__
++
++//#include <linux/types.h>
++
++/**
++ * @file
++ *
++ * This file contains the CFI specific common constants, interfaces
++ * (functions and macros) and structures for Linux. No PCD specific
++ * data structure or definition is to be included in this file.
++ *
++ */
++
++/** This is a request for all Core Features */
++#define VEN_CORE_GET_FEATURES		0xB1
++
++/** This is a request to get the value of a specific Core Feature */
++#define VEN_CORE_GET_FEATURE		0xB2
++
++/** This command allows the host to set the value of a specific Core Feature */
++#define VEN_CORE_SET_FEATURE		0xB3
++
++/** This command allows the host to set the default values of
++ * either all or any specific Core Feature
++ */
++#define VEN_CORE_RESET_FEATURES		0xB4
++
++/** This command forces the PCD to write the deferred values of a Core Features */
++#define VEN_CORE_ACTIVATE_FEATURES	0xB5
++
++/** This request reads a DWORD value from a register at the specified offset */
++#define VEN_CORE_READ_REGISTER		0xB6
++
++/** This request writes a DWORD value into a register at the specified offset */
++#define VEN_CORE_WRITE_REGISTER		0xB7
++
++/** This structure is the header of the Core Features dataset returned to
++ *  the Host
++ */
++struct cfi_all_features_header {
++/** The features header structure length is */
++#define CFI_ALL_FEATURES_HDR_LEN		8
++	/**
++	 * The total length of the features dataset returned to the Host
++	 */
++	uint16_t wTotalLen;
++
++	/**
++	 * CFI version number inBinary-Coded Decimal (i.e., 1.00 is 100H).
++	 * This field identifies the version of the CFI Specification with which
++	 * the device is compliant.
++	 */
++	uint16_t wVersion;
++
++	/** The ID of the Core */
++	uint16_t wCoreID;
++#define CFI_CORE_ID_UDC		1
++#define CFI_CORE_ID_OTG		2
++#define CFI_CORE_ID_WUDEV	3
++
++	/** Number of features returned by VEN_CORE_GET_FEATURES request */
++	uint16_t wNumFeatures;
++} UPACKED;
++
++typedef struct cfi_all_features_header cfi_all_features_header_t;
++
++/** This structure is a header of the Core Feature descriptor dataset returned to
++ *  the Host after the VEN_CORE_GET_FEATURES request
++ */
++struct cfi_feature_desc_header {
++#define CFI_FEATURE_DESC_HDR_LEN	8
++
++	/** The feature ID */
++	uint16_t wFeatureID;
++
++	/** Length of this feature descriptor in bytes - including the
++	 * length of the feature name string
++	 */
++	uint16_t wLength;
++
++	/** The data length of this feature in bytes */
++	uint16_t wDataLength;
++
++	/**
++	 * Attributes of this features
++	 * D0: Access rights
++	 * 0 - Read/Write
++	 * 1 - Read only
++	 */
++	uint8_t bmAttributes;
++#define CFI_FEATURE_ATTR_RO		1
++#define CFI_FEATURE_ATTR_RW		0
++
++	/** Length of the feature name in bytes */
++	uint8_t bNameLen;
++
++	/** The feature name buffer */
++	//uint8_t *name;
++} UPACKED;
++
++typedef struct cfi_feature_desc_header cfi_feature_desc_header_t;
++
++/**
++ * This structure describes a NULL terminated string referenced by its id field.
++ * It is very similar to usb_string structure but has the id field type set to 16-bit.
++ */
++struct cfi_string {
++	uint16_t id;
++	const uint8_t *s;
++};
++typedef struct cfi_string cfi_string_t;
++
++#endif
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_adp.c linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_adp.c
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_adp.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_adp.c	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,854 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_adp.c $
++ * $Revision: #12 $
++ * $Date: 2011/10/26 $
++ * $Change: 1873028 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#include "dwc_os.h"
++#include "dwc_otg_regs.h"
++#include "dwc_otg_cil.h"
++#include "dwc_otg_adp.h"
++
++/** @file
++ *
++ * This file contains the most of the Attach Detect Protocol implementation for
++ * the driver to support OTG Rev2.0.
++ *
++ */
++
++void dwc_otg_adp_write_reg(dwc_otg_core_if_t * core_if, uint32_t value)
++{
++	adpctl_data_t adpctl;
++
++	adpctl.d32 = value;
++	adpctl.b.ar = 0x2;
++
++	DWC_WRITE_REG32(&core_if->core_global_regs->adpctl, adpctl.d32);
++
++	while (adpctl.b.ar) {
++		adpctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->adpctl);
++	}
++
++}
++
++/**
++ * Function is called to read ADP registers
++ */
++uint32_t dwc_otg_adp_read_reg(dwc_otg_core_if_t * core_if)
++{
++	adpctl_data_t adpctl;
++
++	adpctl.d32 = 0;
++	adpctl.b.ar = 0x1;
++
++	DWC_WRITE_REG32(&core_if->core_global_regs->adpctl, adpctl.d32);
++
++	while (adpctl.b.ar) {
++		adpctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->adpctl);
++	}
++
++	return adpctl.d32;
++}
++
++/**
++ * Function is called to read ADPCTL register and filter Write-clear bits
++ */
++uint32_t dwc_otg_adp_read_reg_filter(dwc_otg_core_if_t * core_if)
++{
++	adpctl_data_t adpctl;
++
++	adpctl.d32 = dwc_otg_adp_read_reg(core_if);
++	adpctl.b.adp_tmout_int = 0;
++	adpctl.b.adp_prb_int = 0;
++	adpctl.b.adp_tmout_int = 0;
++
++	return adpctl.d32;
++}
++
++/**
++ * Function is called to write ADP registers
++ */
++void dwc_otg_adp_modify_reg(dwc_otg_core_if_t * core_if, uint32_t clr,
++			    uint32_t set)
++{
++	dwc_otg_adp_write_reg(core_if,
++			      (dwc_otg_adp_read_reg(core_if) & (~clr)) | set);
++}
++
++static void adp_sense_timeout(void *ptr)
++{
++	dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr;
++	core_if->adp.sense_timer_started = 0;
++	DWC_PRINTF("ADP SENSE TIMEOUT\n");
++	if (core_if->adp_enable) {
++		dwc_otg_adp_sense_stop(core_if);
++		dwc_otg_adp_probe_start(core_if);
++	}
++}
++
++/**
++ * This function is called when the ADP vbus timer expires. Timeout is 1.1s.
++ */
++static void adp_vbuson_timeout(void *ptr)
++{
++	gpwrdn_data_t gpwrdn;
++	dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr;
++	hprt0_data_t hprt0 = {.d32 = 0 };
++	pcgcctl_data_t pcgcctl = {.d32 = 0 };
++	DWC_PRINTF("%s: 1.1 seconds expire after turning on VBUS\n",__FUNCTION__);
++	if (core_if) {
++		core_if->adp.vbuson_timer_started = 0;
++		/* Turn off vbus */
++		hprt0.b.prtpwr = 1;
++		DWC_MODIFY_REG32(core_if->host_if->hprt0, hprt0.d32, 0);
++		gpwrdn.d32 = 0;
++
++		/* Power off the core */
++		if (core_if->power_down == 2) {
++			/* Enable Wakeup Logic */
++//                      gpwrdn.b.wkupactiv = 1;
++			gpwrdn.b.pmuactv = 0;
++			gpwrdn.b.pwrdnrstn = 1;
++			gpwrdn.b.pwrdnclmp = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0,
++					 gpwrdn.d32);
++
++			/* Suspend the Phy Clock */
++			pcgcctl.b.stoppclk = 1;
++			DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32);
++
++			/* Switch on VDD */
++//                      gpwrdn.b.wkupactiv = 1;
++			gpwrdn.b.pmuactv = 1;
++			gpwrdn.b.pwrdnrstn = 1;
++			gpwrdn.b.pwrdnclmp = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0,
++					 gpwrdn.d32);
++		} else {
++			/* Enable Power Down Logic */
++			gpwrdn.b.pmuintsel = 1;
++			gpwrdn.b.pmuactv = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++		}
++
++		/* Power off the core */
++		if (core_if->power_down == 2) {
++			gpwrdn.d32 = 0;
++			gpwrdn.b.pwrdnswtch = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn,
++					 gpwrdn.d32, 0);
++		}
++
++		/* Unmask SRP detected interrupt from Power Down Logic */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.srp_det_msk = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++
++		dwc_otg_adp_probe_start(core_if);
++		dwc_otg_dump_global_registers(core_if);
++		dwc_otg_dump_host_registers(core_if);
++	}
++
++}
++
++/**
++ * Start the ADP Initial Probe timer to detect if Port Connected interrupt is
++ * not asserted within 1.1 seconds.
++ *
++ * @param core_if the pointer to core_if strucure.
++ */
++void dwc_otg_adp_vbuson_timer_start(dwc_otg_core_if_t * core_if)
++{
++	core_if->adp.vbuson_timer_started = 1;
++	if (core_if->adp.vbuson_timer)
++	{
++		DWC_PRINTF("SCHEDULING VBUSON TIMER\n");
++		/* 1.1 secs + 60ms necessary for cil_hcd_start*/
++		DWC_TIMER_SCHEDULE(core_if->adp.vbuson_timer, 1160);
++	} else {
++		DWC_WARN("VBUSON_TIMER = %p\n",core_if->adp.vbuson_timer);
++	}
++}
++
++#if 0
++/**
++ * Masks all DWC OTG core interrupts
++ *
++ */
++static void mask_all_interrupts(dwc_otg_core_if_t * core_if)
++{
++	int i;
++	gahbcfg_data_t ahbcfg = {.d32 = 0 };
++
++	/* Mask Host Interrupts */
++
++	/* Clear and disable HCINTs */
++	for (i = 0; i < core_if->core_params->host_channels; i++) {
++		DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcintmsk, 0);
++		DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcint, 0xFFFFFFFF);
++
++	}
++
++	/* Clear and disable HAINT */
++	DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haintmsk, 0x0000);
++	DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haint, 0xFFFFFFFF);
++
++	/* Mask Device Interrupts */
++	if (!core_if->multiproc_int_enable) {
++		/* Clear and disable IN Endpoint interrupts */
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->diepmsk, 0);
++		for (i = 0; i <= core_if->dev_if->num_in_eps; i++) {
++			DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->
++					diepint, 0xFFFFFFFF);
++		}
++
++		/* Clear and disable OUT Endpoint interrupts */
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->doepmsk, 0);
++		for (i = 0; i <= core_if->dev_if->num_out_eps; i++) {
++			DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]->
++					doepint, 0xFFFFFFFF);
++		}
++
++		/* Clear and disable DAINT */
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daint,
++				0xFFFFFFFF);
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daintmsk, 0);
++	} else {
++		for (i = 0; i < core_if->dev_if->num_in_eps; ++i) {
++			DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->
++					diepeachintmsk[i], 0);
++			DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->
++					diepint, 0xFFFFFFFF);
++		}
++
++		for (i = 0; i < core_if->dev_if->num_out_eps; ++i) {
++			DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->
++					doepeachintmsk[i], 0);
++			DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]->
++					doepint, 0xFFFFFFFF);
++		}
++
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->deachintmsk,
++				0);
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->deachint,
++				0xFFFFFFFF);
++
++	}
++
++	/* Disable interrupts */
++	ahbcfg.b.glblintrmsk = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0);
++
++	/* Disable all interrupts. */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0);
++
++	/* Clear any pending interrupts */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++
++	/* Clear any pending OTG Interrupts */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gotgint, 0xFFFFFFFF);
++}
++
++/**
++ * Unmask Port Connection Detected interrupt
++ *
++ */
++static void unmask_conn_det_intr(dwc_otg_core_if_t * core_if)
++{
++	gintmsk_data_t gintmsk = {.d32 = 0,.b.portintr = 1 };
++
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32);
++}
++#endif
++
++/**
++ * Starts the ADP Probing
++ *
++ * @param core_if the pointer to core_if structure.
++ */
++uint32_t dwc_otg_adp_probe_start(dwc_otg_core_if_t * core_if)
++{
++
++	adpctl_data_t adpctl = {.d32 = 0};
++	gpwrdn_data_t gpwrdn;
++#if 0
++	adpctl_data_t adpctl_int = {.d32 = 0, .b.adp_prb_int = 1,
++								.b.adp_sns_int = 1, b.adp_tmout_int};
++#endif
++	dwc_otg_disable_global_interrupts(core_if);
++	DWC_PRINTF("ADP Probe Start\n");
++	core_if->adp.probe_enabled = 1;
++
++	adpctl.b.adpres = 1;
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++
++	while (adpctl.b.adpres) {
++		adpctl.d32 = dwc_otg_adp_read_reg(core_if);
++	}
++
++	adpctl.d32 = 0;
++	gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++
++	/* In Host mode unmask SRP detected interrupt */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.sts_chngint_msk = 1;
++	if (!gpwrdn.b.idsts) {
++		gpwrdn.b.srp_det_msk = 1;
++	}
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++
++	adpctl.b.adp_tmout_int_msk = 1;
++	adpctl.b.adp_prb_int_msk = 1;
++	adpctl.b.prb_dschg = 1;
++	adpctl.b.prb_delta = 1;
++	adpctl.b.prb_per = 1;
++	adpctl.b.adpen = 1;
++	adpctl.b.enaprb = 1;
++
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++	DWC_PRINTF("ADP Probe Finish\n");
++	return 0;
++}
++
++/**
++ * Starts the ADP Sense timer to detect if ADP Sense interrupt is not asserted
++ * within 3 seconds.
++ *
++ * @param core_if the pointer to core_if strucure.
++ */
++void dwc_otg_adp_sense_timer_start(dwc_otg_core_if_t * core_if)
++{
++	core_if->adp.sense_timer_started = 1;
++	DWC_TIMER_SCHEDULE(core_if->adp.sense_timer, 3000 /* 3 secs */ );
++}
++
++/**
++ * Starts the ADP Sense
++ *
++ * @param core_if the pointer to core_if strucure.
++ */
++uint32_t dwc_otg_adp_sense_start(dwc_otg_core_if_t * core_if)
++{
++	adpctl_data_t adpctl;
++
++	DWC_PRINTF("ADP Sense Start\n");
++
++	/* Unmask ADP sense interrupt and mask all other from the core */
++	adpctl.d32 = dwc_otg_adp_read_reg_filter(core_if);
++	adpctl.b.adp_sns_int_msk = 1;
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++	dwc_otg_disable_global_interrupts(core_if); // vahrama
++
++	/* Set ADP reset bit*/
++	adpctl.d32 = dwc_otg_adp_read_reg_filter(core_if);
++	adpctl.b.adpres = 1;
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++
++	while (adpctl.b.adpres) {
++		adpctl.d32 = dwc_otg_adp_read_reg(core_if);
++	}
++
++	adpctl.b.adpres = 0;
++	adpctl.b.adpen = 1;
++	adpctl.b.enasns = 1;
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++
++	dwc_otg_adp_sense_timer_start(core_if);
++
++	return 0;
++}
++
++/**
++ * Stops the ADP Probing
++ *
++ * @param core_if the pointer to core_if strucure.
++ */
++uint32_t dwc_otg_adp_probe_stop(dwc_otg_core_if_t * core_if)
++{
++
++	adpctl_data_t adpctl;
++	DWC_PRINTF("Stop ADP probe\n");
++	core_if->adp.probe_enabled = 0;
++	core_if->adp.probe_counter = 0;
++	adpctl.d32 = dwc_otg_adp_read_reg(core_if);
++
++	adpctl.b.adpen = 0;
++	adpctl.b.adp_prb_int = 1;
++	adpctl.b.adp_tmout_int = 1;
++	adpctl.b.adp_sns_int = 1;
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++
++	return 0;
++}
++
++/**
++ * Stops the ADP Sensing
++ *
++ * @param core_if the pointer to core_if strucure.
++ */
++uint32_t dwc_otg_adp_sense_stop(dwc_otg_core_if_t * core_if)
++{
++	adpctl_data_t adpctl;
++
++	core_if->adp.sense_enabled = 0;
++
++	adpctl.d32 = dwc_otg_adp_read_reg_filter(core_if);
++	adpctl.b.enasns = 0;
++	adpctl.b.adp_sns_int = 1;
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++
++	return 0;
++}
++
++/**
++ * Called to turn on the VBUS after initial ADP probe in host mode.
++ * If port power was already enabled in cil_hcd_start function then
++ * only schedule a timer.
++ *
++ * @param core_if the pointer to core_if structure.
++ */
++void dwc_otg_adp_turnon_vbus(dwc_otg_core_if_t * core_if)
++{
++	hprt0_data_t hprt0 = {.d32 = 0 };
++	hprt0.d32 = dwc_otg_read_hprt0(core_if);
++	DWC_PRINTF("Turn on VBUS for 1.1s, port power is %d\n", hprt0.b.prtpwr);
++
++	if (hprt0.b.prtpwr == 0) {
++		hprt0.b.prtpwr = 1;
++		//DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++	}
++
++	dwc_otg_adp_vbuson_timer_start(core_if);
++}
++
++/**
++ * Called right after driver is loaded
++ * to perform initial actions for ADP
++ *
++ * @param core_if the pointer to core_if structure.
++ * @param is_host - flag for current mode of operation either from GINTSTS or GPWRDN
++ */
++void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host)
++{
++	gpwrdn_data_t gpwrdn;
++
++	DWC_PRINTF("ADP Initial Start\n");
++	core_if->adp.adp_started = 1;
++
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++	dwc_otg_disable_global_interrupts(core_if);
++	if (is_host) {
++		DWC_PRINTF("HOST MODE\n");
++		/* Enable Power Down Logic Interrupt*/
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pmuintsel = 1;
++		gpwrdn.b.pmuactv = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++		/* Initialize first ADP probe to obtain Ramp Time value */
++		core_if->adp.initial_probe = 1;
++		dwc_otg_adp_probe_start(core_if);
++	} else {
++		gotgctl_data_t gotgctl;
++		gotgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
++		DWC_PRINTF("DEVICE MODE\n");
++		if (gotgctl.b.bsesvld == 0) {
++			/* Enable Power Down Logic Interrupt*/
++			gpwrdn.d32 = 0;
++			DWC_PRINTF("VBUS is not valid - start ADP probe\n");
++			gpwrdn.b.pmuintsel = 1;
++			gpwrdn.b.pmuactv = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++			core_if->adp.initial_probe = 1;
++			dwc_otg_adp_probe_start(core_if);
++		} else {
++			DWC_PRINTF("VBUS is valid - initialize core as a Device\n");
++			core_if->op_state = B_PERIPHERAL;
++			dwc_otg_core_init(core_if);
++			dwc_otg_enable_global_interrupts(core_if);
++			cil_pcd_start(core_if);
++			dwc_otg_dump_global_registers(core_if);
++			dwc_otg_dump_dev_registers(core_if);
++		}
++	}
++}
++
++void dwc_otg_adp_init(dwc_otg_core_if_t * core_if)
++{
++	core_if->adp.adp_started = 0;
++	core_if->adp.initial_probe = 0;
++	core_if->adp.probe_timer_values[0] = -1;
++	core_if->adp.probe_timer_values[1] = -1;
++	core_if->adp.probe_enabled = 0;
++	core_if->adp.sense_enabled = 0;
++	core_if->adp.sense_timer_started = 0;
++	core_if->adp.vbuson_timer_started = 0;
++	core_if->adp.probe_counter = 0;
++	core_if->adp.gpwrdn = 0;
++	core_if->adp.attached = DWC_OTG_ADP_UNKOWN;
++	/* Initialize timers */
++	core_if->adp.sense_timer =
++	    DWC_TIMER_ALLOC("ADP SENSE TIMER", adp_sense_timeout, core_if);
++	core_if->adp.vbuson_timer =
++	    DWC_TIMER_ALLOC("ADP VBUS ON TIMER", adp_vbuson_timeout, core_if);
++	if (!core_if->adp.sense_timer || !core_if->adp.vbuson_timer)
++	{
++		DWC_ERROR("Could not allocate memory for ADP timers\n");
++	}
++}
++
++void dwc_otg_adp_remove(dwc_otg_core_if_t * core_if)
++{
++	gpwrdn_data_t gpwrdn = { .d32 = 0 };
++	gpwrdn.b.pmuintsel = 1;
++	gpwrdn.b.pmuactv = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	if (core_if->adp.probe_enabled)
++		dwc_otg_adp_probe_stop(core_if);
++	if (core_if->adp.sense_enabled)
++		dwc_otg_adp_sense_stop(core_if);
++	if (core_if->adp.sense_timer_started)
++		DWC_TIMER_CANCEL(core_if->adp.sense_timer);
++	if (core_if->adp.vbuson_timer_started)
++		DWC_TIMER_CANCEL(core_if->adp.vbuson_timer);
++	DWC_TIMER_FREE(core_if->adp.sense_timer);
++	DWC_TIMER_FREE(core_if->adp.vbuson_timer);
++}
++
++/////////////////////////////////////////////////////////////////////
++////////////// ADP Interrupt Handlers ///////////////////////////////
++/////////////////////////////////////////////////////////////////////
++/**
++ * This function sets Ramp Timer values
++ */
++static uint32_t set_timer_value(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	if (core_if->adp.probe_timer_values[0] == -1) {
++		core_if->adp.probe_timer_values[0] = val;
++		core_if->adp.probe_timer_values[1] = -1;
++		return 1;
++	} else {
++		core_if->adp.probe_timer_values[1] =
++		    core_if->adp.probe_timer_values[0];
++		core_if->adp.probe_timer_values[0] = val;
++		return 0;
++	}
++}
++
++/**
++ * This function compares Ramp Timer values
++ */
++static uint32_t compare_timer_values(dwc_otg_core_if_t * core_if)
++{
++	uint32_t diff;
++	if (core_if->adp.probe_timer_values[0]>=core_if->adp.probe_timer_values[1])
++			diff = core_if->adp.probe_timer_values[0]-core_if->adp.probe_timer_values[1];
++	else
++			diff = core_if->adp.probe_timer_values[1]-core_if->adp.probe_timer_values[0];
++	if(diff < 2) {
++		return 0;
++	} else {
++		return 1;
++	}
++}
++
++/**
++ * This function handles ADP Probe Interrupts
++ */
++static int32_t dwc_otg_adp_handle_prb_intr(dwc_otg_core_if_t * core_if,
++						 uint32_t val)
++{
++	adpctl_data_t adpctl = {.d32 = 0 };
++	gpwrdn_data_t gpwrdn, temp;
++	adpctl.d32 = val;
++
++	temp.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++	core_if->adp.probe_counter++;
++	core_if->adp.gpwrdn = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++	if (adpctl.b.rtim == 0 && !temp.b.idsts){
++		DWC_PRINTF("RTIM value is 0\n");
++		goto exit;
++	}
++	if (set_timer_value(core_if, adpctl.b.rtim) &&
++	    core_if->adp.initial_probe) {
++		core_if->adp.initial_probe = 0;
++		dwc_otg_adp_probe_stop(core_if);
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pmuactv = 1;
++		gpwrdn.b.pmuintsel = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++
++		/* check which value is for device mode and which for Host mode */
++		if (!temp.b.idsts) {	/* considered host mode value is 0 */
++			/*
++			 * Turn on VBUS after initial ADP probe.
++			 */
++			core_if->op_state = A_HOST;
++			dwc_otg_enable_global_interrupts(core_if);
++			DWC_SPINUNLOCK(core_if->lock);
++			cil_hcd_start(core_if);
++			dwc_otg_adp_turnon_vbus(core_if);
++			DWC_SPINLOCK(core_if->lock);
++		} else {
++			/*
++			 * Initiate SRP after initial ADP probe.
++			 */
++			dwc_otg_enable_global_interrupts(core_if);
++			dwc_otg_initiate_srp(core_if);
++		}
++	} else if (core_if->adp.probe_counter > 2){
++		gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++		if (compare_timer_values(core_if)) {
++			DWC_PRINTF("Difference in timer values !!! \n");
++//                      core_if->adp.attached = DWC_OTG_ADP_ATTACHED;
++			dwc_otg_adp_probe_stop(core_if);
++
++			/* Power on the core */
++			if (core_if->power_down == 2) {
++				gpwrdn.b.pwrdnswtch = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++			}
++
++			/* check which value is for device mode and which for Host mode */
++			if (!temp.b.idsts) {	/* considered host mode value is 0 */
++				/* Disable Interrupt from Power Down Logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pmuintsel = 1;
++				gpwrdn.b.pmuactv = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, gpwrdn.d32, 0);
++
++				/*
++				 * Initialize the Core for Host mode.
++				 */
++				core_if->op_state = A_HOST;
++				dwc_otg_core_init(core_if);
++				dwc_otg_enable_global_interrupts(core_if);
++				cil_hcd_start(core_if);
++			} else {
++				gotgctl_data_t gotgctl;
++				/* Mask SRP detected interrupt from Power Down Logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.srp_det_msk = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, gpwrdn.d32, 0);
++
++				/* Disable Power Down Logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pmuintsel = 1;
++				gpwrdn.b.pmuactv = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, gpwrdn.d32, 0);
++
++				/*
++				 * Initialize the Core for Device mode.
++				 */
++				core_if->op_state = B_PERIPHERAL;
++				dwc_otg_core_init(core_if);
++				dwc_otg_enable_global_interrupts(core_if);
++				cil_pcd_start(core_if);
++
++				gotgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
++				if (!gotgctl.b.bsesvld) {
++					dwc_otg_initiate_srp(core_if);
++				}
++			}
++		}
++		if (core_if->power_down == 2) {
++			if (gpwrdn.b.bsessvld) {
++				/* Mask SRP detected interrupt from Power Down Logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.srp_det_msk = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++				/* Disable Power Down Logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pmuactv = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++				/*
++				 * Initialize the Core for Device mode.
++				 */
++				core_if->op_state = B_PERIPHERAL;
++				dwc_otg_core_init(core_if);
++				dwc_otg_enable_global_interrupts(core_if);
++				cil_pcd_start(core_if);
++			}
++		}
++	}
++exit:
++	/* Clear interrupt */
++	adpctl.d32 = dwc_otg_adp_read_reg(core_if);
++	adpctl.b.adp_prb_int = 1;
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++
++	return 0;
++}
++
++/**
++ * This function hadles ADP Sense Interrupt
++ */
++static int32_t dwc_otg_adp_handle_sns_intr(dwc_otg_core_if_t * core_if)
++{
++	adpctl_data_t adpctl;
++	/* Stop ADP Sense timer */
++	DWC_TIMER_CANCEL(core_if->adp.sense_timer);
++
++	/* Restart ADP Sense timer */
++	dwc_otg_adp_sense_timer_start(core_if);
++
++	/* Clear interrupt */
++	adpctl.d32 = dwc_otg_adp_read_reg(core_if);
++	adpctl.b.adp_sns_int = 1;
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++
++	return 0;
++}
++
++/**
++ * This function handles ADP Probe Interrupts
++ */
++static int32_t dwc_otg_adp_handle_prb_tmout_intr(dwc_otg_core_if_t * core_if,
++						 uint32_t val)
++{
++	adpctl_data_t adpctl = {.d32 = 0 };
++	adpctl.d32 = val;
++	set_timer_value(core_if, adpctl.b.rtim);
++
++	/* Clear interrupt */
++	adpctl.d32 = dwc_otg_adp_read_reg(core_if);
++	adpctl.b.adp_tmout_int = 1;
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++
++	return 0;
++}
++
++/**
++ * ADP Interrupt handler.
++ *
++ */
++int32_t dwc_otg_adp_handle_intr(dwc_otg_core_if_t * core_if)
++{
++	int retval = 0;
++	adpctl_data_t adpctl = {.d32 = 0};
++
++	adpctl.d32 = dwc_otg_adp_read_reg(core_if);
++	DWC_PRINTF("ADPCTL = %08x\n",adpctl.d32);
++
++	if (adpctl.b.adp_sns_int & adpctl.b.adp_sns_int_msk) {
++		DWC_PRINTF("ADP Sense interrupt\n");
++		retval |= dwc_otg_adp_handle_sns_intr(core_if);
++	}
++	if (adpctl.b.adp_tmout_int & adpctl.b.adp_tmout_int_msk) {
++		DWC_PRINTF("ADP timeout interrupt\n");
++		retval |= dwc_otg_adp_handle_prb_tmout_intr(core_if, adpctl.d32);
++	}
++	if (adpctl.b.adp_prb_int & adpctl.b.adp_prb_int_msk) {
++		DWC_PRINTF("ADP Probe interrupt\n");
++		adpctl.b.adp_prb_int = 1;
++		retval |= dwc_otg_adp_handle_prb_intr(core_if, adpctl.d32);
++	}
++
++//	dwc_otg_adp_modify_reg(core_if, adpctl.d32, 0);
++	//dwc_otg_adp_write_reg(core_if, adpctl.d32);
++	DWC_PRINTF("RETURN FROM ADP ISR\n");
++
++	return retval;
++}
++
++/**
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_adp_handle_srp_intr(dwc_otg_core_if_t * core_if)
++{
++
++#ifndef DWC_HOST_ONLY
++	hprt0_data_t hprt0;
++	gpwrdn_data_t gpwrdn;
++	DWC_DEBUGPL(DBG_ANY, "++ Power Down Logic Session Request Interrupt++\n");
++
++	gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++	/* check which value is for device mode and which for Host mode */
++	if (!gpwrdn.b.idsts) {	/* considered host mode value is 0 */
++		DWC_PRINTF("SRP: Host mode\n");
++
++		if (core_if->adp_enable) {
++			dwc_otg_adp_probe_stop(core_if);
++
++			/* Power on the core */
++			if (core_if->power_down == 2) {
++				gpwrdn.b.pwrdnswtch = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++			}
++
++			core_if->op_state = A_HOST;
++			dwc_otg_core_init(core_if);
++			dwc_otg_enable_global_interrupts(core_if);
++			cil_hcd_start(core_if);
++		}
++
++		/* Turn on the port power bit. */
++		hprt0.d32 = dwc_otg_read_hprt0(core_if);
++		hprt0.b.prtpwr = 1;
++		DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++
++		/* Start the Connection timer. So a message can be displayed
++		 * if connect does not occur within 10 seconds. */
++		cil_hcd_session_start(core_if);
++	} else {
++		DWC_PRINTF("SRP: Device mode %s\n", __FUNCTION__);
++		if (core_if->adp_enable) {
++			dwc_otg_adp_probe_stop(core_if);
++
++			/* Power on the core */
++			if (core_if->power_down == 2) {
++				gpwrdn.b.pwrdnswtch = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++			}
++
++			gpwrdn.d32 = 0;
++			gpwrdn.b.pmuactv = 0;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0,
++					 gpwrdn.d32);
++
++			core_if->op_state = B_PERIPHERAL;
++			dwc_otg_core_init(core_if);
++			dwc_otg_enable_global_interrupts(core_if);
++			cil_pcd_start(core_if);
++		}
++	}
++#endif
++	return 1;
++}
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_adp.h linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_adp.h
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_adp.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_adp.h	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,80 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_adp.h $
++ * $Revision: #7 $
++ * $Date: 2011/10/24 $
++ * $Change: 1871159 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#ifndef __DWC_OTG_ADP_H__
++#define __DWC_OTG_ADP_H__
++
++/**
++ * @file
++ *
++ * This file contains the Attach Detect Protocol interfaces and defines
++ * (functions) and structures for Linux.
++ *
++ */
++
++#define DWC_OTG_ADP_UNATTACHED	0
++#define DWC_OTG_ADP_ATTACHED	1
++#define DWC_OTG_ADP_UNKOWN	2
++
++typedef struct dwc_otg_adp {
++	uint32_t adp_started;
++	uint32_t initial_probe;
++	int32_t probe_timer_values[2];
++	uint32_t probe_enabled;
++	uint32_t sense_enabled;
++	dwc_timer_t *sense_timer;
++	uint32_t sense_timer_started;
++	dwc_timer_t *vbuson_timer;
++	uint32_t vbuson_timer_started;
++	uint32_t attached;
++	uint32_t probe_counter;
++	uint32_t gpwrdn;
++} dwc_otg_adp_t;
++
++/**
++ * Attach Detect Protocol functions
++ */
++
++extern void dwc_otg_adp_write_reg(dwc_otg_core_if_t * core_if, uint32_t value);
++extern uint32_t dwc_otg_adp_read_reg(dwc_otg_core_if_t * core_if);
++extern uint32_t dwc_otg_adp_probe_start(dwc_otg_core_if_t * core_if);
++extern uint32_t dwc_otg_adp_sense_start(dwc_otg_core_if_t * core_if);
++extern uint32_t dwc_otg_adp_probe_stop(dwc_otg_core_if_t * core_if);
++extern uint32_t dwc_otg_adp_sense_stop(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host);
++extern void dwc_otg_adp_init(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_adp_remove(dwc_otg_core_if_t * core_if);
++extern int32_t dwc_otg_adp_handle_intr(dwc_otg_core_if_t * core_if);
++extern int32_t dwc_otg_adp_handle_srp_intr(dwc_otg_core_if_t * core_if);
++
++#endif //__DWC_OTG_ADP_H__
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_attr.c linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_attr.c
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_attr.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_attr.c	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,1210 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.c $
++ * $Revision: #44 $
++ * $Date: 2010/11/29 $
++ * $Change: 1636033 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ *
++ * The diagnostic interface will provide access to the controller for
++ * bringing up the hardware and testing.  The Linux driver attributes
++ * feature will be used to provide the Linux Diagnostic
++ * Interface. These attributes are accessed through sysfs.
++ */
++
++/** @page "Linux Module Attributes"
++ *
++ * The Linux module attributes feature is used to provide the Linux
++ * Diagnostic Interface.  These attributes are accessed through sysfs.
++ * The diagnostic interface will provide access to the controller for
++ * bringing up the hardware and testing.
++
++ The following table shows the attributes.
++ <table>
++ <tr>
++ <td><b> Name</b></td>
++ <td><b> Description</b></td>
++ <td><b> Access</b></td>
++ </tr>
++
++ <tr>
++ <td> mode </td>
++ <td> Returns the current mode: 0 for device mode, 1 for host mode</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hnpcapable </td>
++ <td> Gets or sets the "HNP-capable" bit in the Core USB Configuraton Register.
++ Read returns the current value.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> srpcapable </td>
++ <td> Gets or sets the "SRP-capable" bit in the Core USB Configuraton Register.
++ Read returns the current value.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> hsic_connect </td>
++ <td> Gets or sets the "HSIC-Connect" bit in the GLPMCFG Register.
++ Read returns the current value.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> inv_sel_hsic </td>
++ <td> Gets or sets the "Invert Select HSIC" bit in the GLPMFG Register.
++ Read returns the current value.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> hnp </td>
++ <td> Initiates the Host Negotiation Protocol.  Read returns the status.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> srp </td>
++ <td> Initiates the Session Request Protocol.  Read returns the status.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> buspower </td>
++ <td> Gets or sets the Power State of the bus (0 - Off or 1 - On)</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> bussuspend </td>
++ <td> Suspends the USB bus.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> busconnected </td>
++ <td> Gets the connection status of the bus</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> gotgctl </td>
++ <td> Gets or sets the Core Control Status Register.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gusbcfg </td>
++ <td> Gets or sets the Core USB Configuration Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> grxfsiz </td>
++ <td> Gets or sets the Receive FIFO Size Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gnptxfsiz </td>
++ <td> Gets or sets the non-periodic Transmit Size Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gpvndctl </td>
++ <td> Gets or sets the PHY Vendor Control Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> ggpio </td>
++ <td> Gets the value in the lower 16-bits of the General Purpose IO Register
++ or sets the upper 16 bits.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> guid </td>
++ <td> Gets or sets the value of the User ID Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gsnpsid </td>
++ <td> Gets the value of the Synopsys ID Regester</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> devspeed </td>
++ <td> Gets or sets the device speed setting in the DCFG register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> enumspeed </td>
++ <td> Gets the device enumeration Speed.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hptxfsiz </td>
++ <td> Gets the value of the Host Periodic Transmit FIFO</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hprt0 </td>
++ <td> Gets or sets the value in the Host Port Control and Status Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> regoffset </td>
++ <td> Sets the register offset for the next Register Access</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> regvalue </td>
++ <td> Gets or sets the value of the register at the offset in the regoffset attribute.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> remote_wakeup </td>
++ <td> On read, shows the status of Remote Wakeup. On write, initiates a remote
++ wakeup of the host. When bit 0 is 1 and Remote Wakeup is enabled, the Remote
++ Wakeup signalling bit in the Device Control Register is set for 1
++ milli-second.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> rem_wakeup_pwrdn </td>
++ <td> On read, shows the status core - hibernated or not. On write, initiates
++ a remote wakeup of the device from Hibernation. </td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> mode_ch_tim_en </td>
++ <td> This bit is used to enable or disable the host core to wait for 200 PHY
++ clock cycles at the end of Resume to change the opmode signal to the PHY to 00
++ after Suspend or LPM. </td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> fr_interval </td>
++ <td> On read, shows the value of HFIR Frame Interval. On write, dynamically
++ reload HFIR register during runtime. The application can write a value to this
++ register only after the Port Enable bit of the Host Port Control and Status
++ register (HPRT.PrtEnaPort) has been set </td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> disconnect_us </td>
++ <td> On read, shows the status of disconnect_device_us. On write, sets disconnect_us
++ which causes soft disconnect for 100us. Applicable only for device mode of operation.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> regdump </td>
++ <td> Dumps the contents of core registers.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> spramdump </td>
++ <td> Dumps the contents of core registers.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hcddump </td>
++ <td> Dumps the current HCD state.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hcd_frrem </td>
++ <td> Shows the average value of the Frame Remaining
++ field in the Host Frame Number/Frame Remaining register when an SOF interrupt
++ occurs. This can be used to determine the average interrupt latency. Also
++ shows the average Frame Remaining value for start_transfer and the "a" and
++ "b" sample points. The "a" and "b" sample points may be used during debugging
++ bto determine how long it takes to execute a section of the HCD code.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> rd_reg_test </td>
++ <td> Displays the time required to read the GNPTXFSIZ register many times
++ (the output shows the number of times the register is read).
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> wr_reg_test </td>
++ <td> Displays the time required to write the GNPTXFSIZ register many times
++ (the output shows the number of times the register is written).
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> lpm_response </td>
++ <td> Gets or sets lpm_response mode. Applicable only in device mode.
++ <td> Write</td>
++ </tr>
++
++ <tr>
++ <td> sleep_status </td>
++ <td> Shows sleep status of device.
++ <td> Read</td>
++ </tr>
++
++ </table>
++
++ Example usage:
++ To get the current mode:
++ cat /sys/devices/lm0/mode
++
++ To power down the USB:
++ echo 0 > /sys/devices/lm0/buspower
++ */
++
++#include "dwc_otg_os_dep.h"
++#include "dwc_os.h"
++#include "dwc_otg_driver.h"
++#include "dwc_otg_attr.h"
++#include "dwc_otg_core_if.h"
++#include "dwc_otg_pcd_if.h"
++#include "dwc_otg_hcd_if.h"
++
++/*
++ * MACROs for defining sysfs attribute
++ */
++#ifdef LM_INTERFACE
++
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++	struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \
++	dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev);		\
++	uint32_t val; \
++	val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \
++	return sprintf (buf, "%s = 0x%x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
++					const char *buf, size_t count) \
++{ \
++	struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \
++	dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \
++	uint32_t set = simple_strtoul(buf, NULL, 16); \
++	dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\
++	return count; \
++}
++
++#elif defined(PCI_INTERFACE)
++
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);	\
++	uint32_t val; \
++	val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \
++	return sprintf (buf, "%s = 0x%x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
++					const char *buf, size_t count) \
++{ \
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);  \
++	uint32_t set = simple_strtoul(buf, NULL, 16); \
++	dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\
++	return count; \
++}
++
++#elif defined(PLATFORM_INTERFACE)
++
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++        struct platform_device *platform_dev = \
++                container_of(_dev, struct platform_device, dev); \
++        dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev);  \
++	uint32_t val; \
++	DWC_PRINTF("%s(%p) -> platform_dev %p, otg_dev %p\n", \
++                    __func__, _dev, platform_dev, otg_dev); \
++	val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \
++	return sprintf (buf, "%s = 0x%x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
++					const char *buf, size_t count) \
++{ \
++        struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \
++        dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \
++	uint32_t set = simple_strtoul(buf, NULL, 16); \
++	dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\
++	return count; \
++}
++#endif
++
++/*
++ * MACROs for defining sysfs attribute for 32-bit registers
++ */
++#ifdef LM_INTERFACE
++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++	struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \
++	dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \
++	uint32_t val; \
++	val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \
++	return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
++					const char *buf, size_t count) \
++{ \
++	struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \
++	dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \
++	uint32_t val = simple_strtoul(buf, NULL, 16); \
++	dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \
++	return count; \
++}
++#elif defined(PCI_INTERFACE)
++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);  \
++	uint32_t val; \
++	val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \
++	return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
++					const char *buf, size_t count) \
++{ \
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);  \
++	uint32_t val = simple_strtoul(buf, NULL, 16); \
++	dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \
++	return count; \
++}
++
++#elif defined(PLATFORM_INTERFACE)
++#include "dwc_otg_dbg.h"
++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++	struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \
++	uint32_t val; \
++	DWC_PRINTF("%s(%p) -> platform_dev %p, otg_dev %p\n", \
++                    __func__, _dev, platform_dev, otg_dev); \
++	val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \
++	return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
++					const char *buf, size_t count) \
++{ \
++	struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \
++	uint32_t val = simple_strtoul(buf, NULL, 16); \
++	dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \
++	return count; \
++}
++
++#endif
++
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RW(_otg_attr_name_,_string_) \
++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \
++DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
++
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RO(_otg_attr_name_,_string_) \
++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
++
++#define DWC_OTG_DEVICE_ATTR_REG32_RW(_otg_attr_name_,_addr_,_string_) \
++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \
++DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
++
++#define DWC_OTG_DEVICE_ATTR_REG32_RO(_otg_attr_name_,_addr_,_string_) \
++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
++
++/** @name Functions for Show/Store of Attributes */
++/**@{*/
++
++/**
++ * Helper function returning the otg_device structure of the given device
++ */
++static dwc_otg_device_t *dwc_otg_drvdev(struct device *_dev)
++{
++        dwc_otg_device_t *otg_dev;
++        DWC_OTG_GETDRVDEV(otg_dev, _dev);
++        return otg_dev;
++}
++
++/**
++ * Show the register offset of the Register Access.
++ */
++static ssize_t regoffset_show(struct device *_dev,
++			      struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	return snprintf(buf, sizeof("0xFFFFFFFF\n") + 1, "0x%08x\n",
++			otg_dev->os_dep.reg_offset);
++}
++
++/**
++ * Set the register offset for the next Register Access 	Read/Write
++ */
++static ssize_t regoffset_store(struct device *_dev,
++			       struct device_attribute *attr,
++			       const char *buf, size_t count)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t offset = simple_strtoul(buf, NULL, 16);
++#if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE)
++	if (offset < SZ_256K) {
++#elif  defined(PCI_INTERFACE)
++	if (offset < 0x00040000) {
++#endif
++		otg_dev->os_dep.reg_offset = offset;
++	} else {
++		dev_err(_dev, "invalid offset\n");
++	}
++
++	return count;
++}
++
++DEVICE_ATTR(regoffset, S_IRUGO | S_IWUSR, regoffset_show, regoffset_store);
++
++/**
++ * Show the value of the register at the offset in the reg_offset
++ * attribute.
++ */
++static ssize_t regvalue_show(struct device *_dev,
++			     struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t val;
++	volatile uint32_t *addr;
++
++	if (otg_dev->os_dep.reg_offset != 0xFFFFFFFF && 0 != otg_dev->os_dep.base) {
++		/* Calculate the address */
++		addr = (uint32_t *) (otg_dev->os_dep.reg_offset +
++				     (uint8_t *) otg_dev->os_dep.base);
++		val = DWC_READ_REG32(addr);
++		return snprintf(buf,
++				sizeof("Reg@0xFFFFFFFF = 0xFFFFFFFF\n") + 1,
++				"Reg@0x%06x = 0x%08x\n", otg_dev->os_dep.reg_offset,
++				val);
++	} else {
++		dev_err(_dev, "Invalid offset (0x%0x)\n", otg_dev->os_dep.reg_offset);
++		return sprintf(buf, "invalid offset\n");
++	}
++}
++
++/**
++ * Store the value in the register at the offset in the reg_offset
++ * attribute.
++ *
++ */
++static ssize_t regvalue_store(struct device *_dev,
++			      struct device_attribute *attr,
++			      const char *buf, size_t count)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	volatile uint32_t *addr;
++	uint32_t val = simple_strtoul(buf, NULL, 16);
++	//dev_dbg(_dev, "Offset=0x%08x Val=0x%08x\n", otg_dev->reg_offset, val);
++	if (otg_dev->os_dep.reg_offset != 0xFFFFFFFF && 0 != otg_dev->os_dep.base) {
++		/* Calculate the address */
++		addr = (uint32_t *) (otg_dev->os_dep.reg_offset +
++				     (uint8_t *) otg_dev->os_dep.base);
++		DWC_WRITE_REG32(addr, val);
++	} else {
++		dev_err(_dev, "Invalid Register Offset (0x%08x)\n",
++			otg_dev->os_dep.reg_offset);
++	}
++	return count;
++}
++
++DEVICE_ATTR(regvalue, S_IRUGO | S_IWUSR, regvalue_show, regvalue_store);
++
++/*
++ * Attributes
++ */
++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(mode, "Mode");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hnpcapable, "HNPCapable");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(srpcapable, "SRPCapable");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hsic_connect, "HSIC Connect");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(inv_sel_hsic, "Invert Select HSIC");
++
++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(buspower,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(bussuspend,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(busconnected, "Bus Connected");
++
++DWC_OTG_DEVICE_ATTR_REG32_RW(gotgctl, 0, "GOTGCTL");
++DWC_OTG_DEVICE_ATTR_REG32_RW(gusbcfg,
++			     &(otg_dev->core_if->core_global_regs->gusbcfg),
++			     "GUSBCFG");
++DWC_OTG_DEVICE_ATTR_REG32_RW(grxfsiz,
++			     &(otg_dev->core_if->core_global_regs->grxfsiz),
++			     "GRXFSIZ");
++DWC_OTG_DEVICE_ATTR_REG32_RW(gnptxfsiz,
++			     &(otg_dev->core_if->core_global_regs->gnptxfsiz),
++			     "GNPTXFSIZ");
++DWC_OTG_DEVICE_ATTR_REG32_RW(gpvndctl,
++			     &(otg_dev->core_if->core_global_regs->gpvndctl),
++			     "GPVNDCTL");
++DWC_OTG_DEVICE_ATTR_REG32_RW(ggpio,
++			     &(otg_dev->core_if->core_global_regs->ggpio),
++			     "GGPIO");
++DWC_OTG_DEVICE_ATTR_REG32_RW(guid, &(otg_dev->core_if->core_global_regs->guid),
++			     "GUID");
++DWC_OTG_DEVICE_ATTR_REG32_RO(gsnpsid,
++			     &(otg_dev->core_if->core_global_regs->gsnpsid),
++			     "GSNPSID");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(devspeed, "Device Speed");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(enumspeed, "Device Enumeration Speed");
++
++DWC_OTG_DEVICE_ATTR_REG32_RO(hptxfsiz,
++			     &(otg_dev->core_if->core_global_regs->hptxfsiz),
++			     "HPTXFSIZ");
++DWC_OTG_DEVICE_ATTR_REG32_RW(hprt0, otg_dev->core_if->host_if->hprt0, "HPRT0");
++
++/**
++ * @todo Add code to initiate the HNP.
++ */
++/**
++ * Show the HNP status bit
++ */
++static ssize_t hnp_show(struct device *_dev,
++			struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	return sprintf(buf, "HstNegScs = 0x%x\n",
++		       dwc_otg_get_hnpstatus(otg_dev->core_if));
++}
++
++/**
++ * Set the HNP Request bit
++ */
++static ssize_t hnp_store(struct device *_dev,
++			 struct device_attribute *attr,
++			 const char *buf, size_t count)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t in = simple_strtoul(buf, NULL, 16);
++	dwc_otg_set_hnpreq(otg_dev->core_if, in);
++	return count;
++}
++
++DEVICE_ATTR(hnp, 0644, hnp_show, hnp_store);
++
++/**
++ * @todo Add code to initiate the SRP.
++ */
++/**
++ * Show the SRP status bit
++ */
++static ssize_t srp_show(struct device *_dev,
++			struct device_attribute *attr, char *buf)
++{
++#ifndef DWC_HOST_ONLY
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	return sprintf(buf, "SesReqScs = 0x%x\n",
++		       dwc_otg_get_srpstatus(otg_dev->core_if));
++#else
++	return sprintf(buf, "Host Only Mode!\n");
++#endif
++}
++
++/**
++ * Set the SRP Request bit
++ */
++static ssize_t srp_store(struct device *_dev,
++			 struct device_attribute *attr,
++			 const char *buf, size_t count)
++{
++#ifndef DWC_HOST_ONLY
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	dwc_otg_pcd_initiate_srp(otg_dev->pcd);
++#endif
++	return count;
++}
++
++DEVICE_ATTR(srp, 0644, srp_show, srp_store);
++
++/**
++ * @todo Need to do more for power on/off?
++ */
++/**
++ * Show the Bus Power status
++ */
++static ssize_t buspower_show(struct device *_dev,
++			     struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	return sprintf(buf, "Bus Power = 0x%x\n",
++		       dwc_otg_get_prtpower(otg_dev->core_if));
++}
++
++/**
++ * Set the Bus Power status
++ */
++static ssize_t buspower_store(struct device *_dev,
++			      struct device_attribute *attr,
++			      const char *buf, size_t count)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t on = simple_strtoul(buf, NULL, 16);
++	dwc_otg_set_prtpower(otg_dev->core_if, on);
++	return count;
++}
++
++DEVICE_ATTR(buspower, 0644, buspower_show, buspower_store);
++
++/**
++ * @todo Need to do more for suspend?
++ */
++/**
++ * Show the Bus Suspend status
++ */
++static ssize_t bussuspend_show(struct device *_dev,
++			       struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	return sprintf(buf, "Bus Suspend = 0x%x\n",
++		       dwc_otg_get_prtsuspend(otg_dev->core_if));
++}
++
++/**
++ * Set the Bus Suspend status
++ */
++static ssize_t bussuspend_store(struct device *_dev,
++				struct device_attribute *attr,
++				const char *buf, size_t count)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t in = simple_strtoul(buf, NULL, 16);
++	dwc_otg_set_prtsuspend(otg_dev->core_if, in);
++	return count;
++}
++
++DEVICE_ATTR(bussuspend, 0644, bussuspend_show, bussuspend_store);
++
++/**
++ * Show the Mode Change Ready Timer status
++ */
++static ssize_t mode_ch_tim_en_show(struct device *_dev,
++				   struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	return sprintf(buf, "Mode Change Ready Timer Enable = 0x%x\n",
++		       dwc_otg_get_mode_ch_tim(otg_dev->core_if));
++}
++
++/**
++ * Set the Mode Change Ready Timer status
++ */
++static ssize_t mode_ch_tim_en_store(struct device *_dev,
++				    struct device_attribute *attr,
++				    const char *buf, size_t count)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t in = simple_strtoul(buf, NULL, 16);
++	dwc_otg_set_mode_ch_tim(otg_dev->core_if, in);
++	return count;
++}
++
++DEVICE_ATTR(mode_ch_tim_en, 0644, mode_ch_tim_en_show, mode_ch_tim_en_store);
++
++/**
++ * Show the value of HFIR Frame Interval bitfield
++ */
++static ssize_t fr_interval_show(struct device *_dev,
++				struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	return sprintf(buf, "Frame Interval = 0x%x\n",
++		       dwc_otg_get_fr_interval(otg_dev->core_if));
++}
++
++/**
++ * Set the HFIR Frame Interval value
++ */
++static ssize_t fr_interval_store(struct device *_dev,
++				 struct device_attribute *attr,
++				 const char *buf, size_t count)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t in = simple_strtoul(buf, NULL, 10);
++	dwc_otg_set_fr_interval(otg_dev->core_if, in);
++	return count;
++}
++
++DEVICE_ATTR(fr_interval, 0644, fr_interval_show, fr_interval_store);
++
++/**
++ * Show the status of Remote Wakeup.
++ */
++static ssize_t remote_wakeup_show(struct device *_dev,
++				  struct device_attribute *attr, char *buf)
++{
++#ifndef DWC_HOST_ONLY
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++
++	return sprintf(buf,
++		       "Remote Wakeup Sig = %d Enabled = %d LPM Remote Wakeup = %d\n",
++		       dwc_otg_get_remotewakesig(otg_dev->core_if),
++		       dwc_otg_pcd_get_rmwkup_enable(otg_dev->pcd),
++		       dwc_otg_get_lpm_remotewakeenabled(otg_dev->core_if));
++#else
++	return sprintf(buf, "Host Only Mode!\n");
++#endif /* DWC_HOST_ONLY */
++}
++
++/**
++ * Initiate a remote wakeup of the host.  The Device control register
++ * Remote Wakeup Signal bit is written if the PCD Remote wakeup enable
++ * flag is set.
++ *
++ */
++static ssize_t remote_wakeup_store(struct device *_dev,
++				   struct device_attribute *attr,
++				   const char *buf, size_t count)
++{
++#ifndef DWC_HOST_ONLY
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t val = simple_strtoul(buf, NULL, 16);
++
++	if (val & 1) {
++		dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 1);
++	} else {
++		dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 0);
++	}
++#endif /* DWC_HOST_ONLY */
++	return count;
++}
++
++DEVICE_ATTR(remote_wakeup, S_IRUGO | S_IWUSR, remote_wakeup_show,
++	    remote_wakeup_store);
++
++/**
++ * Show the whether core is hibernated or not.
++ */
++static ssize_t rem_wakeup_pwrdn_show(struct device *_dev,
++				     struct device_attribute *attr, char *buf)
++{
++#ifndef DWC_HOST_ONLY
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++
++	if (dwc_otg_get_core_state(otg_dev->core_if)) {
++		DWC_PRINTF("Core is in hibernation\n");
++	} else {
++		DWC_PRINTF("Core is not in hibernation\n");
++	}
++#endif /* DWC_HOST_ONLY */
++	return 0;
++}
++
++extern int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if,
++					      int rem_wakeup, int reset);
++
++/**
++ * Initiate a remote wakeup of the device to exit from hibernation.
++ */
++static ssize_t rem_wakeup_pwrdn_store(struct device *_dev,
++				      struct device_attribute *attr,
++				      const char *buf, size_t count)
++{
++#ifndef DWC_HOST_ONLY
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	dwc_otg_device_hibernation_restore(otg_dev->core_if, 1, 0);
++#endif
++	return count;
++}
++
++DEVICE_ATTR(rem_wakeup_pwrdn, S_IRUGO | S_IWUSR, rem_wakeup_pwrdn_show,
++	    rem_wakeup_pwrdn_store);
++
++static ssize_t disconnect_us(struct device *_dev,
++			     struct device_attribute *attr,
++			     const char *buf, size_t count)
++{
++
++#ifndef DWC_HOST_ONLY
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t val = simple_strtoul(buf, NULL, 16);
++	DWC_PRINTF("The Passed value is %04x\n", val);
++
++	dwc_otg_pcd_disconnect_us(otg_dev->pcd, 50);
++
++#endif /* DWC_HOST_ONLY */
++	return count;
++}
++
++DEVICE_ATTR(disconnect_us, S_IWUSR, 0, disconnect_us);
++
++/**
++ * Dump global registers and either host or device registers (depending on the
++ * current mode of the core).
++ */
++static ssize_t regdump_show(struct device *_dev,
++			    struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++
++	dwc_otg_dump_global_registers(otg_dev->core_if);
++	if (dwc_otg_is_host_mode(otg_dev->core_if)) {
++		dwc_otg_dump_host_registers(otg_dev->core_if);
++	} else {
++		dwc_otg_dump_dev_registers(otg_dev->core_if);
++
++	}
++	return sprintf(buf, "Register Dump\n");
++}
++
++DEVICE_ATTR(regdump, S_IRUGO, regdump_show, 0);
++
++/**
++ * Dump global registers and either host or device registers (depending on the
++ * current mode of the core).
++ */
++static ssize_t spramdump_show(struct device *_dev,
++			      struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++
++	//dwc_otg_dump_spram(otg_dev->core_if);
++
++	return sprintf(buf, "SPRAM Dump\n");
++}
++
++DEVICE_ATTR(spramdump, S_IRUGO, spramdump_show, 0);
++
++/**
++ * Dump the current hcd state.
++ */
++static ssize_t hcddump_show(struct device *_dev,
++			    struct device_attribute *attr, char *buf)
++{
++#ifndef DWC_DEVICE_ONLY
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	dwc_otg_hcd_dump_state(otg_dev->hcd);
++#endif /* DWC_DEVICE_ONLY */
++	return sprintf(buf, "HCD Dump\n");
++}
++
++DEVICE_ATTR(hcddump, S_IRUGO, hcddump_show, 0);
++
++/**
++ * Dump the average frame remaining at SOF. This can be used to
++ * determine average interrupt latency. Frame remaining is also shown for
++ * start transfer and two additional sample points.
++ */
++static ssize_t hcd_frrem_show(struct device *_dev,
++			      struct device_attribute *attr, char *buf)
++{
++#ifndef DWC_DEVICE_ONLY
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++
++	dwc_otg_hcd_dump_frrem(otg_dev->hcd);
++#endif /* DWC_DEVICE_ONLY */
++	return sprintf(buf, "HCD Dump Frame Remaining\n");
++}
++
++DEVICE_ATTR(hcd_frrem, S_IRUGO, hcd_frrem_show, 0);
++
++/**
++ * Displays the time required to read the GNPTXFSIZ register many times (the
++ * output shows the number of times the register is read).
++ */
++#define RW_REG_COUNT 10000000
++#define MSEC_PER_JIFFIE 1000/HZ
++static ssize_t rd_reg_test_show(struct device *_dev,
++				struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	int i;
++	int time;
++	int start_jiffies;
++
++	printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
++	       HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
++	start_jiffies = jiffies;
++	for (i = 0; i < RW_REG_COUNT; i++) {
++		dwc_otg_get_gnptxfsiz(otg_dev->core_if);
++	}
++	time = jiffies - start_jiffies;
++	return sprintf(buf,
++		       "Time to read GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
++		       RW_REG_COUNT, time * MSEC_PER_JIFFIE, time);
++}
++
++DEVICE_ATTR(rd_reg_test, S_IRUGO, rd_reg_test_show, 0);
++
++/**
++ * Displays the time required to write the GNPTXFSIZ register many times (the
++ * output shows the number of times the register is written).
++ */
++static ssize_t wr_reg_test_show(struct device *_dev,
++				struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t reg_val;
++	int i;
++	int time;
++	int start_jiffies;
++
++	printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
++	       HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
++	reg_val = dwc_otg_get_gnptxfsiz(otg_dev->core_if);
++	start_jiffies = jiffies;
++	for (i = 0; i < RW_REG_COUNT; i++) {
++		dwc_otg_set_gnptxfsiz(otg_dev->core_if, reg_val);
++	}
++	time = jiffies - start_jiffies;
++	return sprintf(buf,
++		       "Time to write GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
++		       RW_REG_COUNT, time * MSEC_PER_JIFFIE, time);
++}
++
++DEVICE_ATTR(wr_reg_test, S_IRUGO, wr_reg_test_show, 0);
++
++#ifdef CONFIG_USB_DWC_OTG_LPM
++
++/**
++* Show the lpm_response attribute.
++*/
++static ssize_t lpmresp_show(struct device *_dev,
++			    struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++
++	if (!dwc_otg_get_param_lpm_enable(otg_dev->core_if))
++		return sprintf(buf, "** LPM is DISABLED **\n");
++
++	if (!dwc_otg_is_device_mode(otg_dev->core_if)) {
++		return sprintf(buf, "** Current mode is not device mode\n");
++	}
++	return sprintf(buf, "lpm_response = %d\n",
++		       dwc_otg_get_lpmresponse(otg_dev->core_if));
++}
++
++/**
++* Store the lpm_response attribute.
++*/
++static ssize_t lpmresp_store(struct device *_dev,
++			     struct device_attribute *attr,
++			     const char *buf, size_t count)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t val = simple_strtoul(buf, NULL, 16);
++
++	if (!dwc_otg_get_param_lpm_enable(otg_dev->core_if)) {
++		return 0;
++	}
++
++	if (!dwc_otg_is_device_mode(otg_dev->core_if)) {
++		return 0;
++	}
++
++	dwc_otg_set_lpmresponse(otg_dev->core_if, val);
++	return count;
++}
++
++DEVICE_ATTR(lpm_response, S_IRUGO | S_IWUSR, lpmresp_show, lpmresp_store);
++
++/**
++* Show the sleep_status attribute.
++*/
++static ssize_t sleepstatus_show(struct device *_dev,
++				struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	return sprintf(buf, "Sleep Status = %d\n",
++		       dwc_otg_get_lpm_portsleepstatus(otg_dev->core_if));
++}
++
++/**
++ * Store the sleep_status attribure.
++ */
++static ssize_t sleepstatus_store(struct device *_dev,
++				 struct device_attribute *attr,
++				 const char *buf, size_t count)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	dwc_otg_core_if_t *core_if = otg_dev->core_if;
++
++	if (dwc_otg_get_lpm_portsleepstatus(otg_dev->core_if)) {
++		if (dwc_otg_is_host_mode(core_if)) {
++
++			DWC_PRINTF("Host initiated resume\n");
++			dwc_otg_set_prtresume(otg_dev->core_if, 1);
++		}
++	}
++
++	return count;
++}
++
++DEVICE_ATTR(sleep_status, S_IRUGO | S_IWUSR, sleepstatus_show,
++	    sleepstatus_store);
++
++#endif /* CONFIG_USB_DWC_OTG_LPM_ENABLE */
++
++/**@}*/
++
++/**
++ * Create the device files
++ */
++void dwc_otg_attr_create(
++#ifdef LM_INTERFACE
++	struct lm_device *dev
++#elif  defined(PCI_INTERFACE)
++	struct pci_dev *dev
++#elif  defined(PLATFORM_INTERFACE)
++        struct platform_device *dev
++#endif
++    )
++{
++	int error;
++
++	error = device_create_file(&dev->dev, &dev_attr_regoffset);
++	error = device_create_file(&dev->dev, &dev_attr_regvalue);
++	error = device_create_file(&dev->dev, &dev_attr_mode);
++	error = device_create_file(&dev->dev, &dev_attr_hnpcapable);
++	error = device_create_file(&dev->dev, &dev_attr_srpcapable);
++	error = device_create_file(&dev->dev, &dev_attr_hsic_connect);
++	error = device_create_file(&dev->dev, &dev_attr_inv_sel_hsic);
++	error = device_create_file(&dev->dev, &dev_attr_hnp);
++	error = device_create_file(&dev->dev, &dev_attr_srp);
++	error = device_create_file(&dev->dev, &dev_attr_buspower);
++	error = device_create_file(&dev->dev, &dev_attr_bussuspend);
++	error = device_create_file(&dev->dev, &dev_attr_mode_ch_tim_en);
++	error = device_create_file(&dev->dev, &dev_attr_fr_interval);
++	error = device_create_file(&dev->dev, &dev_attr_busconnected);
++	error = device_create_file(&dev->dev, &dev_attr_gotgctl);
++	error = device_create_file(&dev->dev, &dev_attr_gusbcfg);
++	error = device_create_file(&dev->dev, &dev_attr_grxfsiz);
++	error = device_create_file(&dev->dev, &dev_attr_gnptxfsiz);
++	error = device_create_file(&dev->dev, &dev_attr_gpvndctl);
++	error = device_create_file(&dev->dev, &dev_attr_ggpio);
++	error = device_create_file(&dev->dev, &dev_attr_guid);
++	error = device_create_file(&dev->dev, &dev_attr_gsnpsid);
++	error = device_create_file(&dev->dev, &dev_attr_devspeed);
++	error = device_create_file(&dev->dev, &dev_attr_enumspeed);
++	error = device_create_file(&dev->dev, &dev_attr_hptxfsiz);
++	error = device_create_file(&dev->dev, &dev_attr_hprt0);
++	error = device_create_file(&dev->dev, &dev_attr_remote_wakeup);
++	error = device_create_file(&dev->dev, &dev_attr_rem_wakeup_pwrdn);
++	error = device_create_file(&dev->dev, &dev_attr_disconnect_us);
++	error = device_create_file(&dev->dev, &dev_attr_regdump);
++	error = device_create_file(&dev->dev, &dev_attr_spramdump);
++	error = device_create_file(&dev->dev, &dev_attr_hcddump);
++	error = device_create_file(&dev->dev, &dev_attr_hcd_frrem);
++	error = device_create_file(&dev->dev, &dev_attr_rd_reg_test);
++	error = device_create_file(&dev->dev, &dev_attr_wr_reg_test);
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	error = device_create_file(&dev->dev, &dev_attr_lpm_response);
++	error = device_create_file(&dev->dev, &dev_attr_sleep_status);
++#endif
++}
++
++/**
++ * Remove the device files
++ */
++void dwc_otg_attr_remove(
++#ifdef LM_INTERFACE
++	struct lm_device *dev
++#elif  defined(PCI_INTERFACE)
++	struct pci_dev *dev
++#elif  defined(PLATFORM_INTERFACE)
++	struct platform_device *dev
++#endif
++    )
++{
++	device_remove_file(&dev->dev, &dev_attr_regoffset);
++	device_remove_file(&dev->dev, &dev_attr_regvalue);
++	device_remove_file(&dev->dev, &dev_attr_mode);
++	device_remove_file(&dev->dev, &dev_attr_hnpcapable);
++	device_remove_file(&dev->dev, &dev_attr_srpcapable);
++	device_remove_file(&dev->dev, &dev_attr_hsic_connect);
++	device_remove_file(&dev->dev, &dev_attr_inv_sel_hsic);
++	device_remove_file(&dev->dev, &dev_attr_hnp);
++	device_remove_file(&dev->dev, &dev_attr_srp);
++	device_remove_file(&dev->dev, &dev_attr_buspower);
++	device_remove_file(&dev->dev, &dev_attr_bussuspend);
++	device_remove_file(&dev->dev, &dev_attr_mode_ch_tim_en);
++	device_remove_file(&dev->dev, &dev_attr_fr_interval);
++	device_remove_file(&dev->dev, &dev_attr_busconnected);
++	device_remove_file(&dev->dev, &dev_attr_gotgctl);
++	device_remove_file(&dev->dev, &dev_attr_gusbcfg);
++	device_remove_file(&dev->dev, &dev_attr_grxfsiz);
++	device_remove_file(&dev->dev, &dev_attr_gnptxfsiz);
++	device_remove_file(&dev->dev, &dev_attr_gpvndctl);
++	device_remove_file(&dev->dev, &dev_attr_ggpio);
++	device_remove_file(&dev->dev, &dev_attr_guid);
++	device_remove_file(&dev->dev, &dev_attr_gsnpsid);
++	device_remove_file(&dev->dev, &dev_attr_devspeed);
++	device_remove_file(&dev->dev, &dev_attr_enumspeed);
++	device_remove_file(&dev->dev, &dev_attr_hptxfsiz);
++	device_remove_file(&dev->dev, &dev_attr_hprt0);
++	device_remove_file(&dev->dev, &dev_attr_remote_wakeup);
++	device_remove_file(&dev->dev, &dev_attr_rem_wakeup_pwrdn);
++	device_remove_file(&dev->dev, &dev_attr_disconnect_us);
++	device_remove_file(&dev->dev, &dev_attr_regdump);
++	device_remove_file(&dev->dev, &dev_attr_spramdump);
++	device_remove_file(&dev->dev, &dev_attr_hcddump);
++	device_remove_file(&dev->dev, &dev_attr_hcd_frrem);
++	device_remove_file(&dev->dev, &dev_attr_rd_reg_test);
++	device_remove_file(&dev->dev, &dev_attr_wr_reg_test);
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	device_remove_file(&dev->dev, &dev_attr_lpm_response);
++	device_remove_file(&dev->dev, &dev_attr_sleep_status);
++#endif
++}
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_attr.h linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_attr.h
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_attr.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_attr.h	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,89 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.h $
++ * $Revision: #13 $
++ * $Date: 2010/06/21 $
++ * $Change: 1532021 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_OTG_ATTR_H__)
++#define __DWC_OTG_ATTR_H__
++
++/** @file
++ * This file contains the interface to the Linux device attributes.
++ */
++extern struct device_attribute dev_attr_regoffset;
++extern struct device_attribute dev_attr_regvalue;
++
++extern struct device_attribute dev_attr_mode;
++extern struct device_attribute dev_attr_hnpcapable;
++extern struct device_attribute dev_attr_srpcapable;
++extern struct device_attribute dev_attr_hnp;
++extern struct device_attribute dev_attr_srp;
++extern struct device_attribute dev_attr_buspower;
++extern struct device_attribute dev_attr_bussuspend;
++extern struct device_attribute dev_attr_mode_ch_tim_en;
++extern struct device_attribute dev_attr_fr_interval;
++extern struct device_attribute dev_attr_busconnected;
++extern struct device_attribute dev_attr_gotgctl;
++extern struct device_attribute dev_attr_gusbcfg;
++extern struct device_attribute dev_attr_grxfsiz;
++extern struct device_attribute dev_attr_gnptxfsiz;
++extern struct device_attribute dev_attr_gpvndctl;
++extern struct device_attribute dev_attr_ggpio;
++extern struct device_attribute dev_attr_guid;
++extern struct device_attribute dev_attr_gsnpsid;
++extern struct device_attribute dev_attr_devspeed;
++extern struct device_attribute dev_attr_enumspeed;
++extern struct device_attribute dev_attr_hptxfsiz;
++extern struct device_attribute dev_attr_hprt0;
++#ifdef CONFIG_USB_DWC_OTG_LPM
++extern struct device_attribute dev_attr_lpm_response;
++extern struct device_attribute devi_attr_sleep_status;
++#endif
++
++void dwc_otg_attr_create(
++#ifdef LM_INTERFACE
++				struct lm_device *dev
++#elif  defined(PCI_INTERFACE)
++				struct pci_dev *dev
++#elif  defined(PLATFORM_INTERFACE)
++	struct platform_device *dev
++#endif
++    );
++
++void dwc_otg_attr_remove(
++#ifdef LM_INTERFACE
++				struct lm_device *dev
++#elif  defined(PCI_INTERFACE)
++				struct pci_dev *dev
++#elif  defined(PLATFORM_INTERFACE)
++	struct platform_device *dev
++#endif
++    );
++#endif
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_cfi.c linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_cfi.c
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_cfi.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_cfi.c	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,1876 @@
++/* ==========================================================================
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ *
++ * This file contains the most of the CFI(Core Feature Interface)
++ * implementation for the OTG.
++ */
++
++#ifdef DWC_UTE_CFI
++
++#include "dwc_otg_pcd.h"
++#include "dwc_otg_cfi.h"
++
++/** This definition should actually migrate to the Portability Library */
++#define DWC_CONSTANT_CPU_TO_LE16(x) (x)
++
++extern dwc_otg_pcd_ep_t *get_ep_by_addr(dwc_otg_pcd_t * pcd, u16 wIndex);
++
++static int cfi_core_features_buf(uint8_t * buf, uint16_t buflen);
++static int cfi_get_feature_value(uint8_t * buf, uint16_t buflen,
++				 struct dwc_otg_pcd *pcd,
++				 struct cfi_usb_ctrlrequest *ctrl_req);
++static int cfi_set_feature_value(struct dwc_otg_pcd *pcd);
++static int cfi_ep_get_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd,
++			     struct cfi_usb_ctrlrequest *req);
++static int cfi_ep_get_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd,
++				 struct cfi_usb_ctrlrequest *req);
++static int cfi_ep_get_align_val(uint8_t * buf, struct dwc_otg_pcd *pcd,
++				struct cfi_usb_ctrlrequest *req);
++static int cfi_preproc_reset(struct dwc_otg_pcd *pcd,
++			     struct cfi_usb_ctrlrequest *req);
++static void cfi_free_ep_bs_dyn_data(cfi_ep_t * cfiep);
++
++static uint16_t get_dfifo_size(dwc_otg_core_if_t * core_if);
++static int32_t get_rxfifo_size(dwc_otg_core_if_t * core_if, uint16_t wValue);
++static int32_t get_txfifo_size(struct dwc_otg_pcd *pcd, uint16_t wValue);
++
++static uint8_t resize_fifos(dwc_otg_core_if_t * core_if);
++
++/** This is the header of the all features descriptor */
++static cfi_all_features_header_t all_props_desc_header = {
++	.wVersion = DWC_CONSTANT_CPU_TO_LE16(0x100),
++	.wCoreID = DWC_CONSTANT_CPU_TO_LE16(CFI_CORE_ID_OTG),
++	.wNumFeatures = DWC_CONSTANT_CPU_TO_LE16(9),
++};
++
++/** This is an array of statically allocated feature descriptors */
++static cfi_feature_desc_header_t prop_descs[] = {
++
++	/* FT_ID_DMA_MODE */
++	{
++	 .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_MODE),
++	 .bmAttributes = CFI_FEATURE_ATTR_RW,
++	 .wDataLength = DWC_CONSTANT_CPU_TO_LE16(1),
++	 },
++
++	/* FT_ID_DMA_BUFFER_SETUP */
++	{
++	 .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_BUFFER_SETUP),
++	 .bmAttributes = CFI_FEATURE_ATTR_RW,
++	 .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6),
++	 },
++
++	/* FT_ID_DMA_BUFF_ALIGN */
++	{
++	 .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_BUFF_ALIGN),
++	 .bmAttributes = CFI_FEATURE_ATTR_RW,
++	 .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2),
++	 },
++
++	/* FT_ID_DMA_CONCAT_SETUP */
++	{
++	 .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_CONCAT_SETUP),
++	 .bmAttributes = CFI_FEATURE_ATTR_RW,
++	 //.wDataLength  = DWC_CONSTANT_CPU_TO_LE16(6),
++	 },
++
++	/* FT_ID_DMA_CIRCULAR */
++	{
++	 .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_CIRCULAR),
++	 .bmAttributes = CFI_FEATURE_ATTR_RW,
++	 .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6),
++	 },
++
++	/* FT_ID_THRESHOLD_SETUP */
++	{
++	 .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_THRESHOLD_SETUP),
++	 .bmAttributes = CFI_FEATURE_ATTR_RW,
++	 .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6),
++	 },
++
++	/* FT_ID_DFIFO_DEPTH */
++	{
++	 .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DFIFO_DEPTH),
++	 .bmAttributes = CFI_FEATURE_ATTR_RO,
++	 .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2),
++	 },
++
++	/* FT_ID_TX_FIFO_DEPTH */
++	{
++	 .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_TX_FIFO_DEPTH),
++	 .bmAttributes = CFI_FEATURE_ATTR_RW,
++	 .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2),
++	 },
++
++	/* FT_ID_RX_FIFO_DEPTH */
++	{
++	 .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_RX_FIFO_DEPTH),
++	 .bmAttributes = CFI_FEATURE_ATTR_RW,
++	 .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2),
++	 }
++};
++
++/** The table of feature names */
++cfi_string_t prop_name_table[] = {
++	{FT_ID_DMA_MODE, "dma_mode"},
++	{FT_ID_DMA_BUFFER_SETUP, "buffer_setup"},
++	{FT_ID_DMA_BUFF_ALIGN, "buffer_align"},
++	{FT_ID_DMA_CONCAT_SETUP, "concat_setup"},
++	{FT_ID_DMA_CIRCULAR, "buffer_circular"},
++	{FT_ID_THRESHOLD_SETUP, "threshold_setup"},
++	{FT_ID_DFIFO_DEPTH, "dfifo_depth"},
++	{FT_ID_TX_FIFO_DEPTH, "txfifo_depth"},
++	{FT_ID_RX_FIFO_DEPTH, "rxfifo_depth"},
++	{}
++};
++
++/************************************************************************/
++
++/**
++ * Returns the name of the feature by its ID
++ * or NULL if no featute ID matches.
++ *
++ */
++const uint8_t *get_prop_name(uint16_t prop_id, int *len)
++{
++	cfi_string_t *pstr;
++	*len = 0;
++
++	for (pstr = prop_name_table; pstr && pstr->s; pstr++) {
++		if (pstr->id == prop_id) {
++			*len = DWC_STRLEN(pstr->s);
++			return pstr->s;
++		}
++	}
++	return NULL;
++}
++
++/**
++ * This function handles all CFI specific control requests.
++ *
++ * Return a negative value to stall the DCE.
++ */
++int cfi_setup(struct dwc_otg_pcd *pcd, struct cfi_usb_ctrlrequest *ctrl)
++{
++	int retval = 0;
++	dwc_otg_pcd_ep_t *ep = NULL;
++	cfiobject_t *cfi = pcd->cfi;
++	struct dwc_otg_core_if *coreif = GET_CORE_IF(pcd);
++	uint16_t wLen = DWC_LE16_TO_CPU(&ctrl->wLength);
++	uint16_t wValue = DWC_LE16_TO_CPU(&ctrl->wValue);
++	uint16_t wIndex = DWC_LE16_TO_CPU(&ctrl->wIndex);
++	uint32_t regaddr = 0;
++	uint32_t regval = 0;
++
++	/* Save this Control Request in the CFI object.
++	 * The data field will be assigned in the data stage completion CB function.
++	 */
++	cfi->ctrl_req = *ctrl;
++	cfi->ctrl_req.data = NULL;
++
++	cfi->need_gadget_att = 0;
++	cfi->need_status_in_complete = 0;
++
++	switch (ctrl->bRequest) {
++	case VEN_CORE_GET_FEATURES:
++		retval = cfi_core_features_buf(cfi->buf_in.buf, CFI_IN_BUF_LEN);
++		if (retval >= 0) {
++			//dump_msg(cfi->buf_in.buf, retval);
++			ep = &pcd->ep0;
++
++			retval = min((uint16_t) retval, wLen);
++			/* Transfer this buffer to the host through the EP0-IN EP */
++			ep->dwc_ep.dma_addr = cfi->buf_in.addr;
++			ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf;
++			ep->dwc_ep.xfer_buff = cfi->buf_in.buf;
++			ep->dwc_ep.xfer_len = retval;
++			ep->dwc_ep.xfer_count = 0;
++			ep->dwc_ep.sent_zlp = 0;
++			ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
++
++			pcd->ep0_pending = 1;
++			dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep);
++		}
++		retval = 0;
++		break;
++
++	case VEN_CORE_GET_FEATURE:
++		CFI_INFO("VEN_CORE_GET_FEATURE\n");
++		retval = cfi_get_feature_value(cfi->buf_in.buf, CFI_IN_BUF_LEN,
++					       pcd, ctrl);
++		if (retval >= 0) {
++			ep = &pcd->ep0;
++
++			retval = min((uint16_t) retval, wLen);
++			/* Transfer this buffer to the host through the EP0-IN EP */
++			ep->dwc_ep.dma_addr = cfi->buf_in.addr;
++			ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf;
++			ep->dwc_ep.xfer_buff = cfi->buf_in.buf;
++			ep->dwc_ep.xfer_len = retval;
++			ep->dwc_ep.xfer_count = 0;
++			ep->dwc_ep.sent_zlp = 0;
++			ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
++
++			pcd->ep0_pending = 1;
++			dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep);
++		}
++		CFI_INFO("VEN_CORE_GET_FEATURE=%d\n", retval);
++		dump_msg(cfi->buf_in.buf, retval);
++		break;
++
++	case VEN_CORE_SET_FEATURE:
++		CFI_INFO("VEN_CORE_SET_FEATURE\n");
++		/* Set up an XFER to get the data stage of the control request,
++		 * which is the new value of the feature to be modified.
++		 */
++		ep = &pcd->ep0;
++		ep->dwc_ep.is_in = 0;
++		ep->dwc_ep.dma_addr = cfi->buf_out.addr;
++		ep->dwc_ep.start_xfer_buff = cfi->buf_out.buf;
++		ep->dwc_ep.xfer_buff = cfi->buf_out.buf;
++		ep->dwc_ep.xfer_len = wLen;
++		ep->dwc_ep.xfer_count = 0;
++		ep->dwc_ep.sent_zlp = 0;
++		ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
++
++		pcd->ep0_pending = 1;
++		/* Read the control write's data stage */
++		dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep);
++		retval = 0;
++		break;
++
++	case VEN_CORE_RESET_FEATURES:
++		CFI_INFO("VEN_CORE_RESET_FEATURES\n");
++		cfi->need_gadget_att = 1;
++		cfi->need_status_in_complete = 1;
++		retval = cfi_preproc_reset(pcd, ctrl);
++		CFI_INFO("VEN_CORE_RESET_FEATURES = (%d)\n", retval);
++		break;
++
++	case VEN_CORE_ACTIVATE_FEATURES:
++		CFI_INFO("VEN_CORE_ACTIVATE_FEATURES\n");
++		break;
++
++	case VEN_CORE_READ_REGISTER:
++		CFI_INFO("VEN_CORE_READ_REGISTER\n");
++		/* wValue optionally contains the HI WORD of the register offset and
++		 * wIndex contains the LOW WORD of the register offset
++		 */
++		if (wValue == 0) {
++			/* @TODO - MAS - fix the access to the base field */
++			regaddr = 0;
++			//regaddr = (uint32_t) pcd->otg_dev->os_dep.base;
++			//GET_CORE_IF(pcd)->co
++			regaddr |= wIndex;
++		} else {
++			regaddr = (wValue << 16) | wIndex;
++		}
++
++		/* Read a 32-bit value of the memory at the regaddr */
++		regval = DWC_READ_REG32((uint32_t *) regaddr);
++
++		ep = &pcd->ep0;
++		dwc_memcpy(cfi->buf_in.buf, &regval, sizeof(uint32_t));
++		ep->dwc_ep.is_in = 1;
++		ep->dwc_ep.dma_addr = cfi->buf_in.addr;
++		ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf;
++		ep->dwc_ep.xfer_buff = cfi->buf_in.buf;
++		ep->dwc_ep.xfer_len = wLen;
++		ep->dwc_ep.xfer_count = 0;
++		ep->dwc_ep.sent_zlp = 0;
++		ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
++
++		pcd->ep0_pending = 1;
++		dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep);
++		cfi->need_gadget_att = 0;
++		retval = 0;
++		break;
++
++	case VEN_CORE_WRITE_REGISTER:
++		CFI_INFO("VEN_CORE_WRITE_REGISTER\n");
++		/* Set up an XFER to get the data stage of the control request,
++		 * which is the new value of the register to be modified.
++		 */
++		ep = &pcd->ep0;
++		ep->dwc_ep.is_in = 0;
++		ep->dwc_ep.dma_addr = cfi->buf_out.addr;
++		ep->dwc_ep.start_xfer_buff = cfi->buf_out.buf;
++		ep->dwc_ep.xfer_buff = cfi->buf_out.buf;
++		ep->dwc_ep.xfer_len = wLen;
++		ep->dwc_ep.xfer_count = 0;
++		ep->dwc_ep.sent_zlp = 0;
++		ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
++
++		pcd->ep0_pending = 1;
++		/* Read the control write's data stage */
++		dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep);
++		retval = 0;
++		break;
++
++	default:
++		retval = -DWC_E_NOT_SUPPORTED;
++		break;
++	}
++
++	return retval;
++}
++
++/**
++ * This function prepares the core features descriptors and copies its
++ * raw representation into the buffer <buf>.
++ *
++ * The buffer structure is as follows:
++ *	all_features_header (8 bytes)
++ *	features_#1 (8 bytes + feature name string length)
++ *	features_#2 (8 bytes + feature name string length)
++ *	.....
++ *	features_#n - where n=the total count of feature descriptors
++ */
++static int cfi_core_features_buf(uint8_t * buf, uint16_t buflen)
++{
++	cfi_feature_desc_header_t *prop_hdr = prop_descs;
++	cfi_feature_desc_header_t *prop;
++	cfi_all_features_header_t *all_props_hdr = &all_props_desc_header;
++	cfi_all_features_header_t *tmp;
++	uint8_t *tmpbuf = buf;
++	const uint8_t *pname = NULL;
++	int i, j, namelen = 0, totlen;
++
++	/* Prepare and copy the core features into the buffer */
++	CFI_INFO("%s:\n", __func__);
++
++	tmp = (cfi_all_features_header_t *) tmpbuf;
++	*tmp = *all_props_hdr;
++	tmpbuf += CFI_ALL_FEATURES_HDR_LEN;
++
++	j = sizeof(prop_descs) / sizeof(cfi_all_features_header_t);
++	for (i = 0; i < j; i++, prop_hdr++) {
++		pname = get_prop_name(prop_hdr->wFeatureID, &namelen);
++		prop = (cfi_feature_desc_header_t *) tmpbuf;
++		*prop = *prop_hdr;
++
++		prop->bNameLen = namelen;
++		prop->wLength =
++		    DWC_CONSTANT_CPU_TO_LE16(CFI_FEATURE_DESC_HDR_LEN +
++					     namelen);
++
++		tmpbuf += CFI_FEATURE_DESC_HDR_LEN;
++		dwc_memcpy(tmpbuf, pname, namelen);
++		tmpbuf += namelen;
++	}
++
++	totlen = tmpbuf - buf;
++
++	if (totlen > 0) {
++		tmp = (cfi_all_features_header_t *) buf;
++		tmp->wTotalLen = DWC_CONSTANT_CPU_TO_LE16(totlen);
++	}
++
++	return totlen;
++}
++
++/**
++ * This function releases all the dynamic memory in the CFI object.
++ */
++static void cfi_release(cfiobject_t * cfiobj)
++{
++	cfi_ep_t *cfiep;
++	dwc_list_link_t *tmp;
++
++	CFI_INFO("%s\n", __func__);
++
++	if (cfiobj->buf_in.buf) {
++		DWC_DMA_FREE(CFI_IN_BUF_LEN, cfiobj->buf_in.buf,
++			     cfiobj->buf_in.addr);
++		cfiobj->buf_in.buf = NULL;
++	}
++
++	if (cfiobj->buf_out.buf) {
++		DWC_DMA_FREE(CFI_OUT_BUF_LEN, cfiobj->buf_out.buf,
++			     cfiobj->buf_out.addr);
++		cfiobj->buf_out.buf = NULL;
++	}
++
++	/* Free the Buffer Setup values for each EP */
++	//list_for_each_entry(cfiep, &cfiobj->active_eps, lh) {
++	DWC_LIST_FOREACH(tmp, &cfiobj->active_eps) {
++		cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
++		cfi_free_ep_bs_dyn_data(cfiep);
++	}
++}
++
++/**
++ * This function frees the dynamically allocated EP buffer setup data.
++ */
++static void cfi_free_ep_bs_dyn_data(cfi_ep_t * cfiep)
++{
++	if (cfiep->bm_sg) {
++		DWC_FREE(cfiep->bm_sg);
++		cfiep->bm_sg = NULL;
++	}
++
++	if (cfiep->bm_align) {
++		DWC_FREE(cfiep->bm_align);
++		cfiep->bm_align = NULL;
++	}
++
++	if (cfiep->bm_concat) {
++		if (NULL != cfiep->bm_concat->wTxBytes) {
++			DWC_FREE(cfiep->bm_concat->wTxBytes);
++			cfiep->bm_concat->wTxBytes = NULL;
++		}
++		DWC_FREE(cfiep->bm_concat);
++		cfiep->bm_concat = NULL;
++	}
++}
++
++/**
++ * This function initializes the default values of the features
++ * for a specific endpoint and should be called only once when
++ * the EP is enabled first time.
++ */
++static int cfi_ep_init_defaults(struct dwc_otg_pcd *pcd, cfi_ep_t * cfiep)
++{
++	int retval = 0;
++
++	cfiep->bm_sg = DWC_ALLOC(sizeof(ddma_sg_buffer_setup_t));
++	if (NULL == cfiep->bm_sg) {
++		CFI_INFO("Failed to allocate memory for SG feature value\n");
++		return -DWC_E_NO_MEMORY;
++	}
++	dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t));
++
++	/* For the Concatenation feature's default value we do not allocate
++	 * memory for the wTxBytes field - it will be done in the set_feature_value
++	 * request handler.
++	 */
++	cfiep->bm_concat = DWC_ALLOC(sizeof(ddma_concat_buffer_setup_t));
++	if (NULL == cfiep->bm_concat) {
++		CFI_INFO
++		    ("Failed to allocate memory for CONCATENATION feature value\n");
++		DWC_FREE(cfiep->bm_sg);
++		return -DWC_E_NO_MEMORY;
++	}
++	dwc_memset(cfiep->bm_concat, 0, sizeof(ddma_concat_buffer_setup_t));
++
++	cfiep->bm_align = DWC_ALLOC(sizeof(ddma_align_buffer_setup_t));
++	if (NULL == cfiep->bm_align) {
++		CFI_INFO
++		    ("Failed to allocate memory for Alignment feature value\n");
++		DWC_FREE(cfiep->bm_sg);
++		DWC_FREE(cfiep->bm_concat);
++		return -DWC_E_NO_MEMORY;
++	}
++	dwc_memset(cfiep->bm_align, 0, sizeof(ddma_align_buffer_setup_t));
++
++	return retval;
++}
++
++/**
++ * The callback function that notifies the CFI on the activation of
++ * an endpoint in the PCD. The following steps are done in this function:
++ *
++ *	Create a dynamically allocated cfi_ep_t object (a CFI wrapper to the PCD's
++ *		active endpoint)
++ *	Create MAX_DMA_DESCS_PER_EP count DMA Descriptors for the EP
++ *	Set the Buffer Mode to standard
++ *	Initialize the default values for all EP modes (SG, Circular, Concat, Align)
++ *	Add the cfi_ep_t object to the list of active endpoints in the CFI object
++ */
++static int cfi_ep_enable(struct cfiobject *cfi, struct dwc_otg_pcd *pcd,
++			 struct dwc_otg_pcd_ep *ep)
++{
++	cfi_ep_t *cfiep;
++	int retval = -DWC_E_NOT_SUPPORTED;
++
++	CFI_INFO("%s: epname=%s; epnum=0x%02x\n", __func__,
++		 "EP_" /*ep->ep.name */ , ep->desc->bEndpointAddress);
++	/* MAS - Check whether this endpoint already is in the list */
++	cfiep = get_cfi_ep_by_pcd_ep(cfi, ep);
++
++	if (NULL == cfiep) {
++		/* Allocate a cfi_ep_t object */
++		cfiep = DWC_ALLOC(sizeof(cfi_ep_t));
++		if (NULL == cfiep) {
++			CFI_INFO
++			    ("Unable to allocate memory for <cfiep> in function %s\n",
++			     __func__);
++			return -DWC_E_NO_MEMORY;
++		}
++		dwc_memset(cfiep, 0, sizeof(cfi_ep_t));
++
++		/* Save the dwc_otg_pcd_ep pointer in the cfiep object */
++		cfiep->ep = ep;
++
++		/* Allocate the DMA Descriptors chain of MAX_DMA_DESCS_PER_EP count */
++		ep->dwc_ep.descs =
++		    DWC_DMA_ALLOC(MAX_DMA_DESCS_PER_EP *
++				  sizeof(dwc_otg_dma_desc_t),
++				  &ep->dwc_ep.descs_dma_addr);
++
++		if (NULL == ep->dwc_ep.descs) {
++			DWC_FREE(cfiep);
++			return -DWC_E_NO_MEMORY;
++		}
++
++		DWC_LIST_INIT(&cfiep->lh);
++
++		/* Set the buffer mode to BM_STANDARD. It will be modified
++		 * when building descriptors for a specific buffer mode */
++		ep->dwc_ep.buff_mode = BM_STANDARD;
++
++		/* Create and initialize the default values for this EP's Buffer modes */
++		if ((retval = cfi_ep_init_defaults(pcd, cfiep)) < 0)
++			return retval;
++
++		/* Add the cfi_ep_t object to the CFI object's list of active endpoints */
++		DWC_LIST_INSERT_TAIL(&cfi->active_eps, &cfiep->lh);
++		retval = 0;
++	} else {		/* The sought EP already is in the list */
++		CFI_INFO("%s: The sought EP already is in the list\n",
++			 __func__);
++	}
++
++	return retval;
++}
++
++/**
++ * This function is called when the data stage of a 3-stage Control Write request
++ * is complete.
++ *
++ */
++static int cfi_ctrl_write_complete(struct cfiobject *cfi,
++				   struct dwc_otg_pcd *pcd)
++{
++	uint32_t addr, reg_value;
++	uint16_t wIndex, wValue;
++	uint8_t bRequest;
++	uint8_t *buf = cfi->buf_out.buf;
++	//struct usb_ctrlrequest *ctrl_req = &cfi->ctrl_req_saved;
++	struct cfi_usb_ctrlrequest *ctrl_req = &cfi->ctrl_req;
++	int retval = -DWC_E_NOT_SUPPORTED;
++
++	CFI_INFO("%s\n", __func__);
++
++	bRequest = ctrl_req->bRequest;
++	wIndex = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wIndex);
++	wValue = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wValue);
++
++	/*
++	 * Save the pointer to the data stage in the ctrl_req's <data> field.
++	 * The request should be already saved in the command stage by now.
++	 */
++	ctrl_req->data = cfi->buf_out.buf;
++	cfi->need_status_in_complete = 0;
++	cfi->need_gadget_att = 0;
++
++	switch (bRequest) {
++	case VEN_CORE_WRITE_REGISTER:
++		/* The buffer contains raw data of the new value for the register */
++		reg_value = *((uint32_t *) buf);
++		if (wValue == 0) {
++			addr = 0;
++			//addr = (uint32_t) pcd->otg_dev->os_dep.base;
++			addr += wIndex;
++		} else {
++			addr = (wValue << 16) | wIndex;
++		}
++
++		//writel(reg_value, addr);
++
++		retval = 0;
++		cfi->need_status_in_complete = 1;
++		break;
++
++	case VEN_CORE_SET_FEATURE:
++		/* The buffer contains raw data of the new value of the feature */
++		retval = cfi_set_feature_value(pcd);
++		if (retval < 0)
++			return retval;
++
++		cfi->need_status_in_complete = 1;
++		break;
++
++	default:
++		break;
++	}
++
++	return retval;
++}
++
++/**
++ * This function builds the DMA descriptors for the SG buffer mode.
++ */
++static void cfi_build_sg_descs(struct cfiobject *cfi, cfi_ep_t * cfiep,
++			       dwc_otg_pcd_request_t * req)
++{
++	struct dwc_otg_pcd_ep *ep = cfiep->ep;
++	ddma_sg_buffer_setup_t *sgval = cfiep->bm_sg;
++	struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs;
++	struct dwc_otg_dma_desc *desc_last = cfiep->ep->dwc_ep.descs;
++	dma_addr_t buff_addr = req->dma;
++	int i;
++	uint32_t txsize, off;
++
++	txsize = sgval->wSize;
++	off = sgval->bOffset;
++
++//      CFI_INFO("%s: %s TXSIZE=0x%08x; OFFSET=0x%08x\n",
++//              __func__, cfiep->ep->ep.name, txsize, off);
++
++	for (i = 0; i < sgval->bCount; i++) {
++		desc->status.b.bs = BS_HOST_BUSY;
++		desc->buf = buff_addr;
++		desc->status.b.l = 0;
++		desc->status.b.ioc = 0;
++		desc->status.b.sp = 0;
++		desc->status.b.bytes = txsize;
++		desc->status.b.bs = BS_HOST_READY;
++
++		/* Set the next address of the buffer */
++		buff_addr += txsize + off;
++		desc_last = desc;
++		desc++;
++	}
++
++	/* Set the last, ioc and sp bits on the Last DMA Descriptor */
++	desc_last->status.b.l = 1;
++	desc_last->status.b.ioc = 1;
++	desc_last->status.b.sp = ep->dwc_ep.sent_zlp;
++	/* Save the last DMA descriptor pointer */
++	cfiep->dma_desc_last = desc_last;
++	cfiep->desc_count = sgval->bCount;
++}
++
++/**
++ * This function builds the DMA descriptors for the Concatenation buffer mode.
++ */
++static void cfi_build_concat_descs(struct cfiobject *cfi, cfi_ep_t * cfiep,
++				   dwc_otg_pcd_request_t * req)
++{
++	struct dwc_otg_pcd_ep *ep = cfiep->ep;
++	ddma_concat_buffer_setup_t *concatval = cfiep->bm_concat;
++	struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs;
++	struct dwc_otg_dma_desc *desc_last = cfiep->ep->dwc_ep.descs;
++	dma_addr_t buff_addr = req->dma;
++	int i;
++	uint16_t *txsize;
++
++	txsize = concatval->wTxBytes;
++
++	for (i = 0; i < concatval->hdr.bDescCount; i++) {
++		desc->buf = buff_addr;
++		desc->status.b.bs = BS_HOST_BUSY;
++		desc->status.b.l = 0;
++		desc->status.b.ioc = 0;
++		desc->status.b.sp = 0;
++		desc->status.b.bytes = *txsize;
++		desc->status.b.bs = BS_HOST_READY;
++
++		txsize++;
++		/* Set the next address of the buffer */
++		buff_addr += UGETW(ep->desc->wMaxPacketSize);
++		desc_last = desc;
++		desc++;
++	}
++
++	/* Set the last, ioc and sp bits on the Last DMA Descriptor */
++	desc_last->status.b.l = 1;
++	desc_last->status.b.ioc = 1;
++	desc_last->status.b.sp = ep->dwc_ep.sent_zlp;
++	cfiep->dma_desc_last = desc_last;
++	cfiep->desc_count = concatval->hdr.bDescCount;
++}
++
++/**
++ * This function builds the DMA descriptors for the Circular buffer mode
++ */
++static void cfi_build_circ_descs(struct cfiobject *cfi, cfi_ep_t * cfiep,
++				 dwc_otg_pcd_request_t * req)
++{
++	/* @todo: MAS - add implementation when this feature needs to be tested */
++}
++
++/**
++ * This function builds the DMA descriptors for the Alignment buffer mode
++ */
++static void cfi_build_align_descs(struct cfiobject *cfi, cfi_ep_t * cfiep,
++				  dwc_otg_pcd_request_t * req)
++{
++	struct dwc_otg_pcd_ep *ep = cfiep->ep;
++	ddma_align_buffer_setup_t *alignval = cfiep->bm_align;
++	struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs;
++	dma_addr_t buff_addr = req->dma;
++
++	desc->status.b.bs = BS_HOST_BUSY;
++	desc->status.b.l = 1;
++	desc->status.b.ioc = 1;
++	desc->status.b.sp = ep->dwc_ep.sent_zlp;
++	desc->status.b.bytes = req->length;
++	/* Adjust the buffer alignment */
++	desc->buf = (buff_addr + alignval->bAlign);
++	desc->status.b.bs = BS_HOST_READY;
++	cfiep->dma_desc_last = desc;
++	cfiep->desc_count = 1;
++}
++
++/**
++ * This function builds the DMA descriptors chain for different modes of the
++ * buffer setup of an endpoint.
++ */
++static void cfi_build_descriptors(struct cfiobject *cfi,
++				  struct dwc_otg_pcd *pcd,
++				  struct dwc_otg_pcd_ep *ep,
++				  dwc_otg_pcd_request_t * req)
++{
++	cfi_ep_t *cfiep;
++
++	/* Get the cfiep by the dwc_otg_pcd_ep */
++	cfiep = get_cfi_ep_by_pcd_ep(cfi, ep);
++	if (NULL == cfiep) {
++		CFI_INFO("%s: Unable to find a matching active endpoint\n",
++			 __func__);
++		return;
++	}
++
++	cfiep->xfer_len = req->length;
++
++	/* Iterate through all the DMA descriptors */
++	switch (cfiep->ep->dwc_ep.buff_mode) {
++	case BM_SG:
++		cfi_build_sg_descs(cfi, cfiep, req);
++		break;
++
++	case BM_CONCAT:
++		cfi_build_concat_descs(cfi, cfiep, req);
++		break;
++
++	case BM_CIRCULAR:
++		cfi_build_circ_descs(cfi, cfiep, req);
++		break;
++
++	case BM_ALIGN:
++		cfi_build_align_descs(cfi, cfiep, req);
++		break;
++
++	default:
++		break;
++	}
++}
++
++/**
++ * Allocate DMA buffer for different Buffer modes.
++ */
++static void *cfi_ep_alloc_buf(struct cfiobject *cfi, struct dwc_otg_pcd *pcd,
++			      struct dwc_otg_pcd_ep *ep, dma_addr_t * dma,
++			      unsigned size, gfp_t flags)
++{
++	return DWC_DMA_ALLOC(size, dma);
++}
++
++/**
++ * This function initializes the CFI object.
++ */
++int init_cfi(cfiobject_t * cfiobj)
++{
++	CFI_INFO("%s\n", __func__);
++
++	/* Allocate a buffer for IN XFERs */
++	cfiobj->buf_in.buf =
++	    DWC_DMA_ALLOC(CFI_IN_BUF_LEN, &cfiobj->buf_in.addr);
++	if (NULL == cfiobj->buf_in.buf) {
++		CFI_INFO("Unable to allocate buffer for INs\n");
++		return -DWC_E_NO_MEMORY;
++	}
++
++	/* Allocate a buffer for OUT XFERs */
++	cfiobj->buf_out.buf =
++	    DWC_DMA_ALLOC(CFI_OUT_BUF_LEN, &cfiobj->buf_out.addr);
++	if (NULL == cfiobj->buf_out.buf) {
++		CFI_INFO("Unable to allocate buffer for OUT\n");
++		return -DWC_E_NO_MEMORY;
++	}
++
++	/* Initialize the callback function pointers */
++	cfiobj->ops.release = cfi_release;
++	cfiobj->ops.ep_enable = cfi_ep_enable;
++	cfiobj->ops.ctrl_write_complete = cfi_ctrl_write_complete;
++	cfiobj->ops.build_descriptors = cfi_build_descriptors;
++	cfiobj->ops.ep_alloc_buf = cfi_ep_alloc_buf;
++
++	/* Initialize the list of active endpoints in the CFI object */
++	DWC_LIST_INIT(&cfiobj->active_eps);
++
++	return 0;
++}
++
++/**
++ * This function reads the required feature's current value into the buffer
++ *
++ * @retval: Returns negative as error, or the data length of the feature
++ */
++static int cfi_get_feature_value(uint8_t * buf, uint16_t buflen,
++				 struct dwc_otg_pcd *pcd,
++				 struct cfi_usb_ctrlrequest *ctrl_req)
++{
++	int retval = -DWC_E_NOT_SUPPORTED;
++	struct dwc_otg_core_if *coreif = GET_CORE_IF(pcd);
++	uint16_t dfifo, rxfifo, txfifo;
++
++	switch (ctrl_req->wIndex) {
++		/* Whether the DDMA is enabled or not */
++	case FT_ID_DMA_MODE:
++		*buf = (coreif->dma_enable && coreif->dma_desc_enable) ? 1 : 0;
++		retval = 1;
++		break;
++
++	case FT_ID_DMA_BUFFER_SETUP:
++		retval = cfi_ep_get_sg_val(buf, pcd, ctrl_req);
++		break;
++
++	case FT_ID_DMA_BUFF_ALIGN:
++		retval = cfi_ep_get_align_val(buf, pcd, ctrl_req);
++		break;
++
++	case FT_ID_DMA_CONCAT_SETUP:
++		retval = cfi_ep_get_concat_val(buf, pcd, ctrl_req);
++		break;
++
++	case FT_ID_DMA_CIRCULAR:
++		CFI_INFO("GetFeature value (FT_ID_DMA_CIRCULAR)\n");
++		break;
++
++	case FT_ID_THRESHOLD_SETUP:
++		CFI_INFO("GetFeature value (FT_ID_THRESHOLD_SETUP)\n");
++		break;
++
++	case FT_ID_DFIFO_DEPTH:
++		dfifo = get_dfifo_size(coreif);
++		*((uint16_t *) buf) = dfifo;
++		retval = sizeof(uint16_t);
++		break;
++
++	case FT_ID_TX_FIFO_DEPTH:
++		retval = get_txfifo_size(pcd, ctrl_req->wValue);
++		if (retval >= 0) {
++			txfifo = retval;
++			*((uint16_t *) buf) = txfifo;
++			retval = sizeof(uint16_t);
++		}
++		break;
++
++	case FT_ID_RX_FIFO_DEPTH:
++		retval = get_rxfifo_size(coreif, ctrl_req->wValue);
++		if (retval >= 0) {
++			rxfifo = retval;
++			*((uint16_t *) buf) = rxfifo;
++			retval = sizeof(uint16_t);
++		}
++		break;
++	}
++
++	return retval;
++}
++
++/**
++ * This function resets the SG for the specified EP to its default value
++ */
++static int cfi_reset_sg_val(cfi_ep_t * cfiep)
++{
++	dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t));
++	return 0;
++}
++
++/**
++ * This function resets the Alignment for the specified EP to its default value
++ */
++static int cfi_reset_align_val(cfi_ep_t * cfiep)
++{
++	dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t));
++	return 0;
++}
++
++/**
++ * This function resets the Concatenation for the specified EP to its default value
++ * This function will also set the value of the wTxBytes field to NULL after
++ * freeing the memory previously allocated for this field.
++ */
++static int cfi_reset_concat_val(cfi_ep_t * cfiep)
++{
++	/* First we need to free the wTxBytes field */
++	if (cfiep->bm_concat->wTxBytes) {
++		DWC_FREE(cfiep->bm_concat->wTxBytes);
++		cfiep->bm_concat->wTxBytes = NULL;
++	}
++
++	dwc_memset(cfiep->bm_concat, 0, sizeof(ddma_concat_buffer_setup_t));
++	return 0;
++}
++
++/**
++ * This function resets all the buffer setups of the specified endpoint
++ */
++static int cfi_ep_reset_all_setup_vals(cfi_ep_t * cfiep)
++{
++	cfi_reset_sg_val(cfiep);
++	cfi_reset_align_val(cfiep);
++	cfi_reset_concat_val(cfiep);
++	return 0;
++}
++
++static int cfi_handle_reset_fifo_val(struct dwc_otg_pcd *pcd, uint8_t ep_addr,
++				     uint8_t rx_rst, uint8_t tx_rst)
++{
++	int retval = -DWC_E_INVALID;
++	uint16_t tx_siz[15];
++	uint16_t rx_siz = 0;
++	dwc_otg_pcd_ep_t *ep = NULL;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params;
++
++	if (rx_rst) {
++		rx_siz = params->dev_rx_fifo_size;
++		params->dev_rx_fifo_size = GET_CORE_IF(pcd)->init_rxfsiz;
++	}
++
++	if (tx_rst) {
++		if (ep_addr == 0) {
++			int i;
++
++			for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++				tx_siz[i] =
++				    core_if->core_params->dev_tx_fifo_size[i];
++				core_if->core_params->dev_tx_fifo_size[i] =
++				    core_if->init_txfsiz[i];
++			}
++		} else {
++
++			ep = get_ep_by_addr(pcd, ep_addr);
++
++			if (NULL == ep) {
++				CFI_INFO
++				    ("%s: Unable to get the endpoint addr=0x%02x\n",
++				     __func__, ep_addr);
++				return -DWC_E_INVALID;
++			}
++
++			tx_siz[0] =
++			    params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num -
++						     1];
++			params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] =
++			    GET_CORE_IF(pcd)->init_txfsiz[ep->
++							  dwc_ep.tx_fifo_num -
++							  1];
++		}
++	}
++
++	if (resize_fifos(GET_CORE_IF(pcd))) {
++		retval = 0;
++	} else {
++		CFI_INFO
++		    ("%s: Error resetting the feature Reset All(FIFO size)\n",
++		     __func__);
++		if (rx_rst) {
++			params->dev_rx_fifo_size = rx_siz;
++		}
++
++		if (tx_rst) {
++			if (ep_addr == 0) {
++				int i;
++				for (i = 0; i < core_if->hwcfg4.b.num_in_eps;
++				     i++) {
++					core_if->
++					    core_params->dev_tx_fifo_size[i] =
++					    tx_siz[i];
++				}
++			} else {
++				params->dev_tx_fifo_size[ep->
++							 dwc_ep.tx_fifo_num -
++							 1] = tx_siz[0];
++			}
++		}
++		retval = -DWC_E_INVALID;
++	}
++	return retval;
++}
++
++static int cfi_handle_reset_all(struct dwc_otg_pcd *pcd, uint8_t addr)
++{
++	int retval = 0;
++	cfi_ep_t *cfiep;
++	cfiobject_t *cfi = pcd->cfi;
++	dwc_list_link_t *tmp;
++
++	retval = cfi_handle_reset_fifo_val(pcd, addr, 1, 1);
++	if (retval < 0) {
++		return retval;
++	}
++
++	/* If the EP address is known then reset the features for only that EP */
++	if (addr) {
++		cfiep = get_cfi_ep_by_addr(pcd->cfi, addr);
++		if (NULL == cfiep) {
++			CFI_INFO("%s: Error getting the EP address 0x%02x\n",
++				 __func__, addr);
++			return -DWC_E_INVALID;
++		}
++		retval = cfi_ep_reset_all_setup_vals(cfiep);
++		cfiep->ep->dwc_ep.buff_mode = BM_STANDARD;
++	}
++	/* Otherwise (wValue == 0), reset all features of all EP's */
++	else {
++		/* Traverse all the active EP's and reset the feature(s) value(s) */
++		//list_for_each_entry(cfiep, &cfi->active_eps, lh) {
++		DWC_LIST_FOREACH(tmp, &cfi->active_eps) {
++			cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
++			retval = cfi_ep_reset_all_setup_vals(cfiep);
++			cfiep->ep->dwc_ep.buff_mode = BM_STANDARD;
++			if (retval < 0) {
++				CFI_INFO
++				    ("%s: Error resetting the feature Reset All\n",
++				     __func__);
++				return retval;
++			}
++		}
++	}
++	return retval;
++}
++
++static int cfi_handle_reset_dma_buff_setup(struct dwc_otg_pcd *pcd,
++					   uint8_t addr)
++{
++	int retval = 0;
++	cfi_ep_t *cfiep;
++	cfiobject_t *cfi = pcd->cfi;
++	dwc_list_link_t *tmp;
++
++	/* If the EP address is known then reset the features for only that EP */
++	if (addr) {
++		cfiep = get_cfi_ep_by_addr(pcd->cfi, addr);
++		if (NULL == cfiep) {
++			CFI_INFO("%s: Error getting the EP address 0x%02x\n",
++				 __func__, addr);
++			return -DWC_E_INVALID;
++		}
++		retval = cfi_reset_sg_val(cfiep);
++	}
++	/* Otherwise (wValue == 0), reset all features of all EP's */
++	else {
++		/* Traverse all the active EP's and reset the feature(s) value(s) */
++		//list_for_each_entry(cfiep, &cfi->active_eps, lh) {
++		DWC_LIST_FOREACH(tmp, &cfi->active_eps) {
++			cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
++			retval = cfi_reset_sg_val(cfiep);
++			if (retval < 0) {
++				CFI_INFO
++				    ("%s: Error resetting the feature Buffer Setup\n",
++				     __func__);
++				return retval;
++			}
++		}
++	}
++	return retval;
++}
++
++static int cfi_handle_reset_concat_val(struct dwc_otg_pcd *pcd, uint8_t addr)
++{
++	int retval = 0;
++	cfi_ep_t *cfiep;
++	cfiobject_t *cfi = pcd->cfi;
++	dwc_list_link_t *tmp;
++
++	/* If the EP address is known then reset the features for only that EP */
++	if (addr) {
++		cfiep = get_cfi_ep_by_addr(pcd->cfi, addr);
++		if (NULL == cfiep) {
++			CFI_INFO("%s: Error getting the EP address 0x%02x\n",
++				 __func__, addr);
++			return -DWC_E_INVALID;
++		}
++		retval = cfi_reset_concat_val(cfiep);
++	}
++	/* Otherwise (wValue == 0), reset all features of all EP's */
++	else {
++		/* Traverse all the active EP's and reset the feature(s) value(s) */
++		//list_for_each_entry(cfiep, &cfi->active_eps, lh) {
++		DWC_LIST_FOREACH(tmp, &cfi->active_eps) {
++			cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
++			retval = cfi_reset_concat_val(cfiep);
++			if (retval < 0) {
++				CFI_INFO
++				    ("%s: Error resetting the feature Concatenation Value\n",
++				     __func__);
++				return retval;
++			}
++		}
++	}
++	return retval;
++}
++
++static int cfi_handle_reset_align_val(struct dwc_otg_pcd *pcd, uint8_t addr)
++{
++	int retval = 0;
++	cfi_ep_t *cfiep;
++	cfiobject_t *cfi = pcd->cfi;
++	dwc_list_link_t *tmp;
++
++	/* If the EP address is known then reset the features for only that EP */
++	if (addr) {
++		cfiep = get_cfi_ep_by_addr(pcd->cfi, addr);
++		if (NULL == cfiep) {
++			CFI_INFO("%s: Error getting the EP address 0x%02x\n",
++				 __func__, addr);
++			return -DWC_E_INVALID;
++		}
++		retval = cfi_reset_align_val(cfiep);
++	}
++	/* Otherwise (wValue == 0), reset all features of all EP's */
++	else {
++		/* Traverse all the active EP's and reset the feature(s) value(s) */
++		//list_for_each_entry(cfiep, &cfi->active_eps, lh) {
++		DWC_LIST_FOREACH(tmp, &cfi->active_eps) {
++			cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
++			retval = cfi_reset_align_val(cfiep);
++			if (retval < 0) {
++				CFI_INFO
++				    ("%s: Error resetting the feature Aliignment Value\n",
++				     __func__);
++				return retval;
++			}
++		}
++	}
++	return retval;
++
++}
++
++static int cfi_preproc_reset(struct dwc_otg_pcd *pcd,
++			     struct cfi_usb_ctrlrequest *req)
++{
++	int retval = 0;
++
++	switch (req->wIndex) {
++	case 0:
++		/* Reset all features */
++		retval = cfi_handle_reset_all(pcd, req->wValue & 0xff);
++		break;
++
++	case FT_ID_DMA_BUFFER_SETUP:
++		/* Reset the SG buffer setup */
++		retval =
++		    cfi_handle_reset_dma_buff_setup(pcd, req->wValue & 0xff);
++		break;
++
++	case FT_ID_DMA_CONCAT_SETUP:
++		/* Reset the Concatenation buffer setup */
++		retval = cfi_handle_reset_concat_val(pcd, req->wValue & 0xff);
++		break;
++
++	case FT_ID_DMA_BUFF_ALIGN:
++		/* Reset the Alignment buffer setup */
++		retval = cfi_handle_reset_align_val(pcd, req->wValue & 0xff);
++		break;
++
++	case FT_ID_TX_FIFO_DEPTH:
++		retval =
++		    cfi_handle_reset_fifo_val(pcd, req->wValue & 0xff, 0, 1);
++		pcd->cfi->need_gadget_att = 0;
++		break;
++
++	case FT_ID_RX_FIFO_DEPTH:
++		retval = cfi_handle_reset_fifo_val(pcd, 0, 1, 0);
++		pcd->cfi->need_gadget_att = 0;
++		break;
++	default:
++		break;
++	}
++	return retval;
++}
++
++/**
++ * This function sets a new value for the SG buffer setup.
++ */
++static int cfi_ep_set_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd)
++{
++	uint8_t inaddr, outaddr;
++	cfi_ep_t *epin, *epout;
++	ddma_sg_buffer_setup_t *psgval;
++	uint32_t desccount, size;
++
++	CFI_INFO("%s\n", __func__);
++
++	psgval = (ddma_sg_buffer_setup_t *) buf;
++	desccount = (uint32_t) psgval->bCount;
++	size = (uint32_t) psgval->wSize;
++
++	/* Check the DMA descriptor count */
++	if ((desccount > MAX_DMA_DESCS_PER_EP) || (desccount == 0)) {
++		CFI_INFO
++		    ("%s: The count of DMA Descriptors should be between 1 and %d\n",
++		     __func__, MAX_DMA_DESCS_PER_EP);
++		return -DWC_E_INVALID;
++	}
++
++	/* Check the DMA descriptor count */
++
++	if (size == 0) {
++
++		CFI_INFO("%s: The transfer size should be at least 1 byte\n",
++			 __func__);
++
++		return -DWC_E_INVALID;
++
++	}
++
++	inaddr = psgval->bInEndpointAddress;
++	outaddr = psgval->bOutEndpointAddress;
++
++	epin = get_cfi_ep_by_addr(pcd->cfi, inaddr);
++	epout = get_cfi_ep_by_addr(pcd->cfi, outaddr);
++
++	if (NULL == epin || NULL == epout) {
++		CFI_INFO
++		    ("%s: Unable to get the endpoints inaddr=0x%02x outaddr=0x%02x\n",
++		     __func__, inaddr, outaddr);
++		return -DWC_E_INVALID;
++	}
++
++	epin->ep->dwc_ep.buff_mode = BM_SG;
++	dwc_memcpy(epin->bm_sg, psgval, sizeof(ddma_sg_buffer_setup_t));
++
++	epout->ep->dwc_ep.buff_mode = BM_SG;
++	dwc_memcpy(epout->bm_sg, psgval, sizeof(ddma_sg_buffer_setup_t));
++
++	return 0;
++}
++
++/**
++ * This function sets a new value for the buffer Alignment setup.
++ */
++static int cfi_ep_set_alignment_val(uint8_t * buf, struct dwc_otg_pcd *pcd)
++{
++	cfi_ep_t *ep;
++	uint8_t addr;
++	ddma_align_buffer_setup_t *palignval;
++
++	palignval = (ddma_align_buffer_setup_t *) buf;
++	addr = palignval->bEndpointAddress;
++
++	ep = get_cfi_ep_by_addr(pcd->cfi, addr);
++
++	if (NULL == ep) {
++		CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n",
++			 __func__, addr);
++		return -DWC_E_INVALID;
++	}
++
++	ep->ep->dwc_ep.buff_mode = BM_ALIGN;
++	dwc_memcpy(ep->bm_align, palignval, sizeof(ddma_align_buffer_setup_t));
++
++	return 0;
++}
++
++/**
++ * This function sets a new value for the Concatenation buffer setup.
++ */
++static int cfi_ep_set_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd)
++{
++	uint8_t addr;
++	cfi_ep_t *ep;
++	struct _ddma_concat_buffer_setup_hdr *pConcatValHdr;
++	uint16_t *pVals;
++	uint32_t desccount;
++	int i;
++	uint16_t mps;
++
++	pConcatValHdr = (struct _ddma_concat_buffer_setup_hdr *)buf;
++	desccount = (uint32_t) pConcatValHdr->bDescCount;
++	pVals = (uint16_t *) (buf + BS_CONCAT_VAL_HDR_LEN);
++
++	/* Check the DMA descriptor count */
++	if (desccount > MAX_DMA_DESCS_PER_EP) {
++		CFI_INFO("%s: Maximum DMA Descriptor count should be %d\n",
++			 __func__, MAX_DMA_DESCS_PER_EP);
++		return -DWC_E_INVALID;
++	}
++
++	addr = pConcatValHdr->bEndpointAddress;
++	ep = get_cfi_ep_by_addr(pcd->cfi, addr);
++	if (NULL == ep) {
++		CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n",
++			 __func__, addr);
++		return -DWC_E_INVALID;
++	}
++
++	mps = UGETW(ep->ep->desc->wMaxPacketSize);
++
++#if 0
++	for (i = 0; i < desccount; i++) {
++		CFI_INFO("%s: wTxSize[%d]=0x%04x\n", __func__, i, pVals[i]);
++	}
++	CFI_INFO("%s: epname=%s; mps=%d\n", __func__, ep->ep->ep.name, mps);
++#endif
++
++	/* Check the wTxSizes to be less than or equal to the mps */
++	for (i = 0; i < desccount; i++) {
++		if (pVals[i] > mps) {
++			CFI_INFO
++			    ("%s: ERROR - the wTxSize[%d] should be <= MPS (wTxSize=%d)\n",
++			     __func__, i, pVals[i]);
++			return -DWC_E_INVALID;
++		}
++	}
++
++	ep->ep->dwc_ep.buff_mode = BM_CONCAT;
++	dwc_memcpy(ep->bm_concat, pConcatValHdr, BS_CONCAT_VAL_HDR_LEN);
++
++	/* Free the previously allocated storage for the wTxBytes */
++	if (ep->bm_concat->wTxBytes) {
++		DWC_FREE(ep->bm_concat->wTxBytes);
++	}
++
++	/* Allocate a new storage for the wTxBytes field */
++	ep->bm_concat->wTxBytes =
++	    DWC_ALLOC(sizeof(uint16_t) * pConcatValHdr->bDescCount);
++	if (NULL == ep->bm_concat->wTxBytes) {
++		CFI_INFO("%s: Unable to allocate memory\n", __func__);
++		return -DWC_E_NO_MEMORY;
++	}
++
++	/* Copy the new values into the wTxBytes filed */
++	dwc_memcpy(ep->bm_concat->wTxBytes, buf + BS_CONCAT_VAL_HDR_LEN,
++		   sizeof(uint16_t) * pConcatValHdr->bDescCount);
++
++	return 0;
++}
++
++/**
++ * This function calculates the total of all FIFO sizes
++ *
++ * @param core_if Programming view of DWC_otg controller
++ *
++ * @return The total of data FIFO sizes.
++ *
++ */
++static uint16_t get_dfifo_size(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_core_params_t *params = core_if->core_params;
++	uint16_t dfifo_total = 0;
++	int i;
++
++	/* The shared RxFIFO size */
++	dfifo_total =
++	    params->dev_rx_fifo_size + params->dev_nperio_tx_fifo_size;
++
++	/* Add up each TxFIFO size to the total */
++	for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++		dfifo_total += params->dev_tx_fifo_size[i];
++	}
++
++	return dfifo_total;
++}
++
++/**
++ * This function returns Rx FIFO size
++ *
++ * @param core_if Programming view of DWC_otg controller
++ *
++ * @return The total of data FIFO sizes.
++ *
++ */
++static int32_t get_rxfifo_size(dwc_otg_core_if_t * core_if, uint16_t wValue)
++{
++	switch (wValue >> 8) {
++	case 0:
++		return (core_if->pwron_rxfsiz <
++			32768) ? core_if->pwron_rxfsiz : 32768;
++		break;
++	case 1:
++		return core_if->core_params->dev_rx_fifo_size;
++		break;
++	default:
++		return -DWC_E_INVALID;
++		break;
++	}
++}
++
++/**
++ * This function returns Tx FIFO size for IN EP
++ *
++ * @param core_if Programming view of DWC_otg controller
++ *
++ * @return The total of data FIFO sizes.
++ *
++ */
++static int32_t get_txfifo_size(struct dwc_otg_pcd *pcd, uint16_t wValue)
++{
++	dwc_otg_pcd_ep_t *ep;
++
++	ep = get_ep_by_addr(pcd, wValue & 0xff);
++
++	if (NULL == ep) {
++		CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n",
++			 __func__, wValue & 0xff);
++		return -DWC_E_INVALID;
++	}
++
++	if (!ep->dwc_ep.is_in) {
++		CFI_INFO
++		    ("%s: No Tx FIFO assingned to the Out endpoint addr=0x%02x\n",
++		     __func__, wValue & 0xff);
++		return -DWC_E_INVALID;
++	}
++
++	switch (wValue >> 8) {
++	case 0:
++		return (GET_CORE_IF(pcd)->pwron_txfsiz
++			[ep->dwc_ep.tx_fifo_num - 1] <
++			768) ? GET_CORE_IF(pcd)->pwron_txfsiz[ep->
++							      dwc_ep.tx_fifo_num
++							      - 1] : 32768;
++		break;
++	case 1:
++		return GET_CORE_IF(pcd)->core_params->
++		    dev_tx_fifo_size[ep->dwc_ep.num - 1];
++		break;
++	default:
++		return -DWC_E_INVALID;
++		break;
++	}
++}
++
++/**
++ * This function checks if the submitted combination of
++ * device mode FIFO sizes is possible or not.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ *
++ * @return 1 if possible, 0 otherwise.
++ *
++ */
++static uint8_t check_fifo_sizes(dwc_otg_core_if_t * core_if)
++{
++	uint16_t dfifo_actual = 0;
++	dwc_otg_core_params_t *params = core_if->core_params;
++	uint16_t start_addr = 0;
++	int i;
++
++	dfifo_actual =
++	    params->dev_rx_fifo_size + params->dev_nperio_tx_fifo_size;
++
++	for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++		dfifo_actual += params->dev_tx_fifo_size[i];
++	}
++
++	if (dfifo_actual > core_if->total_fifo_size) {
++		return 0;
++	}
++
++	if (params->dev_rx_fifo_size > 32768 || params->dev_rx_fifo_size < 16)
++		return 0;
++
++	if (params->dev_nperio_tx_fifo_size > 32768
++	    || params->dev_nperio_tx_fifo_size < 16)
++		return 0;
++
++	for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++
++		if (params->dev_tx_fifo_size[i] > 768
++		    || params->dev_tx_fifo_size[i] < 4)
++			return 0;
++	}
++
++	if (params->dev_rx_fifo_size > core_if->pwron_rxfsiz)
++		return 0;
++	start_addr = params->dev_rx_fifo_size;
++
++	if (params->dev_nperio_tx_fifo_size > core_if->pwron_gnptxfsiz)
++		return 0;
++	start_addr += params->dev_nperio_tx_fifo_size;
++
++	for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++
++		if (params->dev_tx_fifo_size[i] > core_if->pwron_txfsiz[i])
++			return 0;
++		start_addr += params->dev_tx_fifo_size[i];
++	}
++
++	return 1;
++}
++
++/**
++ * This function resizes Device mode FIFOs
++ *
++ * @param core_if Programming view of DWC_otg controller
++ *
++ * @return 1 if successful, 0 otherwise
++ *
++ */
++static uint8_t resize_fifos(dwc_otg_core_if_t * core_if)
++{
++	int i = 0;
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	dwc_otg_core_params_t *params = core_if->core_params;
++	uint32_t rx_fifo_size;
++	fifosize_data_t nptxfifosize;
++	fifosize_data_t txfifosize[15];
++
++	uint32_t rx_fsz_bak;
++	uint32_t nptxfsz_bak;
++	uint32_t txfsz_bak[15];
++
++	uint16_t start_address;
++	uint8_t retval = 1;
++
++	if (!check_fifo_sizes(core_if)) {
++		return 0;
++	}
++
++	/* Configure data FIFO sizes */
++	if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
++		rx_fsz_bak = DWC_READ_REG32(&global_regs->grxfsiz);
++		rx_fifo_size = params->dev_rx_fifo_size;
++		DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fifo_size);
++
++		/*
++		 * Tx FIFOs These FIFOs are numbered from 1 to 15.
++		 * Indexes of the FIFO size module parameters in the
++		 * dev_tx_fifo_size array and the FIFO size registers in
++		 * the dtxfsiz array run from 0 to 14.
++		 */
++
++		/* Non-periodic Tx FIFO */
++		nptxfsz_bak = DWC_READ_REG32(&global_regs->gnptxfsiz);
++		nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
++		start_address = params->dev_rx_fifo_size;
++		nptxfifosize.b.startaddr = start_address;
++
++		DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfifosize.d32);
++
++		start_address += nptxfifosize.b.depth;
++
++		for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++			txfsz_bak[i] = DWC_READ_REG32(&global_regs->dtxfsiz[i]);
++
++			txfifosize[i].b.depth = params->dev_tx_fifo_size[i];
++			txfifosize[i].b.startaddr = start_address;
++			DWC_WRITE_REG32(&global_regs->dtxfsiz[i],
++					txfifosize[i].d32);
++
++			start_address += txfifosize[i].b.depth;
++		}
++
++		/** Check if register values are set correctly */
++		if (rx_fifo_size != DWC_READ_REG32(&global_regs->grxfsiz)) {
++			retval = 0;
++		}
++
++		if (nptxfifosize.d32 != DWC_READ_REG32(&global_regs->gnptxfsiz)) {
++			retval = 0;
++		}
++
++		for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++			if (txfifosize[i].d32 !=
++			    DWC_READ_REG32(&global_regs->dtxfsiz[i])) {
++				retval = 0;
++			}
++		}
++
++		/** If register values are not set correctly, reset old values */
++		if (retval == 0) {
++			DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fsz_bak);
++
++			/* Non-periodic Tx FIFO */
++			DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfsz_bak);
++
++			for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++				DWC_WRITE_REG32(&global_regs->dtxfsiz[i],
++						txfsz_bak[i]);
++			}
++		}
++	} else {
++		return 0;
++	}
++
++	/* Flush the FIFOs */
++	dwc_otg_flush_tx_fifo(core_if, 0x10);	/* all Tx FIFOs */
++	dwc_otg_flush_rx_fifo(core_if);
++
++	return retval;
++}
++
++/**
++ * This function sets a new value for the buffer Alignment setup.
++ */
++static int cfi_ep_set_tx_fifo_val(uint8_t * buf, dwc_otg_pcd_t * pcd)
++{
++	int retval;
++	uint32_t fsiz;
++	uint16_t size;
++	uint16_t ep_addr;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params;
++	tx_fifo_size_setup_t *ptxfifoval;
++
++	ptxfifoval = (tx_fifo_size_setup_t *) buf;
++	ep_addr = ptxfifoval->bEndpointAddress;
++	size = ptxfifoval->wDepth;
++
++	ep = get_ep_by_addr(pcd, ep_addr);
++
++	CFI_INFO
++	    ("%s: Set Tx FIFO size: endpoint addr=0x%02x, depth=%d, FIFO Num=%d\n",
++	     __func__, ep_addr, size, ep->dwc_ep.tx_fifo_num);
++
++	if (NULL == ep) {
++		CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n",
++			 __func__, ep_addr);
++		return -DWC_E_INVALID;
++	}
++
++	fsiz = params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1];
++	params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] = size;
++
++	if (resize_fifos(GET_CORE_IF(pcd))) {
++		retval = 0;
++	} else {
++		CFI_INFO
++		    ("%s: Error setting the feature Tx FIFO Size for EP%d\n",
++		     __func__, ep_addr);
++		params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] = fsiz;
++		retval = -DWC_E_INVALID;
++	}
++
++	return retval;
++}
++
++/**
++ * This function sets a new value for the buffer Alignment setup.
++ */
++static int cfi_set_rx_fifo_val(uint8_t * buf, dwc_otg_pcd_t * pcd)
++{
++	int retval;
++	uint32_t fsiz;
++	uint16_t size;
++	dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params;
++	rx_fifo_size_setup_t *prxfifoval;
++
++	prxfifoval = (rx_fifo_size_setup_t *) buf;
++	size = prxfifoval->wDepth;
++
++	fsiz = params->dev_rx_fifo_size;
++	params->dev_rx_fifo_size = size;
++
++	if (resize_fifos(GET_CORE_IF(pcd))) {
++		retval = 0;
++	} else {
++		CFI_INFO("%s: Error setting the feature Rx FIFO Size\n",
++			 __func__);
++		params->dev_rx_fifo_size = fsiz;
++		retval = -DWC_E_INVALID;
++	}
++
++	return retval;
++}
++
++/**
++ * This function reads the SG of an EP's buffer setup into the buffer buf
++ */
++static int cfi_ep_get_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd,
++			     struct cfi_usb_ctrlrequest *req)
++{
++	int retval = -DWC_E_INVALID;
++	uint8_t addr;
++	cfi_ep_t *ep;
++
++	/* The Low Byte of the wValue contains a non-zero address of the endpoint */
++	addr = req->wValue & 0xFF;
++	if (addr == 0)		/* The address should be non-zero */
++		return retval;
++
++	ep = get_cfi_ep_by_addr(pcd->cfi, addr);
++	if (NULL == ep) {
++		CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n",
++			 __func__, addr);
++		return retval;
++	}
++
++	dwc_memcpy(buf, ep->bm_sg, BS_SG_VAL_DESC_LEN);
++	retval = BS_SG_VAL_DESC_LEN;
++	return retval;
++}
++
++/**
++ * This function reads the Concatenation value of an EP's buffer mode into
++ * the buffer buf
++ */
++static int cfi_ep_get_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd,
++				 struct cfi_usb_ctrlrequest *req)
++{
++	int retval = -DWC_E_INVALID;
++	uint8_t addr;
++	cfi_ep_t *ep;
++	uint8_t desc_count;
++
++	/* The Low Byte of the wValue contains a non-zero address of the endpoint */
++	addr = req->wValue & 0xFF;
++	if (addr == 0)		/* The address should be non-zero */
++		return retval;
++
++	ep = get_cfi_ep_by_addr(pcd->cfi, addr);
++	if (NULL == ep) {
++		CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n",
++			 __func__, addr);
++		return retval;
++	}
++
++	/* Copy the header to the buffer */
++	dwc_memcpy(buf, ep->bm_concat, BS_CONCAT_VAL_HDR_LEN);
++	/* Advance the buffer pointer by the header size */
++	buf += BS_CONCAT_VAL_HDR_LEN;
++
++	desc_count = ep->bm_concat->hdr.bDescCount;
++	/* Copy alll the wTxBytes to the buffer */
++	dwc_memcpy(buf, ep->bm_concat->wTxBytes, sizeof(uid16_t) * desc_count);
++
++	retval = BS_CONCAT_VAL_HDR_LEN + sizeof(uid16_t) * desc_count;
++	return retval;
++}
++
++/**
++ * This function reads the buffer Alignment value of an EP's buffer mode into
++ * the buffer buf
++ *
++ * @return The total number of bytes copied to the buffer or negative error code.
++ */
++static int cfi_ep_get_align_val(uint8_t * buf, struct dwc_otg_pcd *pcd,
++				struct cfi_usb_ctrlrequest *req)
++{
++	int retval = -DWC_E_INVALID;
++	uint8_t addr;
++	cfi_ep_t *ep;
++
++	/* The Low Byte of the wValue contains a non-zero address of the endpoint */
++	addr = req->wValue & 0xFF;
++	if (addr == 0)		/* The address should be non-zero */
++		return retval;
++
++	ep = get_cfi_ep_by_addr(pcd->cfi, addr);
++	if (NULL == ep) {
++		CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n",
++			 __func__, addr);
++		return retval;
++	}
++
++	dwc_memcpy(buf, ep->bm_align, BS_ALIGN_VAL_HDR_LEN);
++	retval = BS_ALIGN_VAL_HDR_LEN;
++
++	return retval;
++}
++
++/**
++ * This function sets a new value for the specified feature
++ *
++ * @param	pcd	A pointer to the PCD object
++ *
++ * @return 0 if successful, negative error code otherwise to stall the DCE.
++ */
++static int cfi_set_feature_value(struct dwc_otg_pcd *pcd)
++{
++	int retval = -DWC_E_NOT_SUPPORTED;
++	uint16_t wIndex, wValue;
++	uint8_t bRequest;
++	struct dwc_otg_core_if *coreif;
++	cfiobject_t *cfi = pcd->cfi;
++	struct cfi_usb_ctrlrequest *ctrl_req;
++	uint8_t *buf;
++	ctrl_req = &cfi->ctrl_req;
++
++	buf = pcd->cfi->ctrl_req.data;
++
++	coreif = GET_CORE_IF(pcd);
++	bRequest = ctrl_req->bRequest;
++	wIndex = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wIndex);
++	wValue = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wValue);
++
++	/* See which feature is to be modified */
++	switch (wIndex) {
++	case FT_ID_DMA_BUFFER_SETUP:
++		/* Modify the feature */
++		if ((retval = cfi_ep_set_sg_val(buf, pcd)) < 0)
++			return retval;
++
++		/* And send this request to the gadget */
++		cfi->need_gadget_att = 1;
++		break;
++
++	case FT_ID_DMA_BUFF_ALIGN:
++		if ((retval = cfi_ep_set_alignment_val(buf, pcd)) < 0)
++			return retval;
++		cfi->need_gadget_att = 1;
++		break;
++
++	case FT_ID_DMA_CONCAT_SETUP:
++		/* Modify the feature */
++		if ((retval = cfi_ep_set_concat_val(buf, pcd)) < 0)
++			return retval;
++		cfi->need_gadget_att = 1;
++		break;
++
++	case FT_ID_DMA_CIRCULAR:
++		CFI_INFO("FT_ID_DMA_CIRCULAR\n");
++		break;
++
++	case FT_ID_THRESHOLD_SETUP:
++		CFI_INFO("FT_ID_THRESHOLD_SETUP\n");
++		break;
++
++	case FT_ID_DFIFO_DEPTH:
++		CFI_INFO("FT_ID_DFIFO_DEPTH\n");
++		break;
++
++	case FT_ID_TX_FIFO_DEPTH:
++		CFI_INFO("FT_ID_TX_FIFO_DEPTH\n");
++		if ((retval = cfi_ep_set_tx_fifo_val(buf, pcd)) < 0)
++			return retval;
++		cfi->need_gadget_att = 0;
++		break;
++
++	case FT_ID_RX_FIFO_DEPTH:
++		CFI_INFO("FT_ID_RX_FIFO_DEPTH\n");
++		if ((retval = cfi_set_rx_fifo_val(buf, pcd)) < 0)
++			return retval;
++		cfi->need_gadget_att = 0;
++		break;
++	}
++
++	return retval;
++}
++
++#endif //DWC_UTE_CFI
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_cfi.h linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_cfi.h
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_cfi.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_cfi.h	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,320 @@
++/* ==========================================================================
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_OTG_CFI_H__)
++#define __DWC_OTG_CFI_H__
++
++#include "dwc_otg_pcd.h"
++#include "dwc_cfi_common.h"
++
++/**
++ * @file
++ * This file contains the CFI related OTG PCD specific common constants,
++ * interfaces(functions and macros) and data structures.The CFI Protocol is an
++ * optional interface for internal testing purposes that a DUT may implement to
++ * support testing of configurable features.
++ *
++ */
++
++struct dwc_otg_pcd;
++struct dwc_otg_pcd_ep;
++
++/** OTG CFI Features (properties) ID constants */
++/** This is a request for all Core Features */
++#define FT_ID_DMA_MODE					0x0001
++#define FT_ID_DMA_BUFFER_SETUP			0x0002
++#define FT_ID_DMA_BUFF_ALIGN			0x0003
++#define FT_ID_DMA_CONCAT_SETUP			0x0004
++#define FT_ID_DMA_CIRCULAR				0x0005
++#define FT_ID_THRESHOLD_SETUP			0x0006
++#define FT_ID_DFIFO_DEPTH				0x0007
++#define FT_ID_TX_FIFO_DEPTH				0x0008
++#define FT_ID_RX_FIFO_DEPTH				0x0009
++
++/**********************************************************/
++#define CFI_INFO_DEF
++
++#ifdef CFI_INFO_DEF
++#define CFI_INFO(fmt...)	DWC_PRINTF("CFI: " fmt);
++#else
++#define CFI_INFO(fmt...)
++#endif
++
++#define min(x,y) ({ \
++	x < y ? x : y; })
++
++#define max(x,y) ({ \
++	x > y ? x : y; })
++
++/**
++ * Descriptor DMA SG Buffer setup structure (SG buffer). This structure is
++ * also used for setting up a buffer for Circular DDMA.
++ */
++struct _ddma_sg_buffer_setup {
++#define BS_SG_VAL_DESC_LEN	6
++	/* The OUT EP address */
++	uint8_t bOutEndpointAddress;
++	/* The IN EP address */
++	uint8_t bInEndpointAddress;
++	/* Number of bytes to put between transfer segments (must be DWORD boundaries) */
++	uint8_t bOffset;
++	/* The number of transfer segments (a DMA descriptors per each segment) */
++	uint8_t bCount;
++	/* Size (in byte) of each transfer segment */
++	uint16_t wSize;
++} __attribute__ ((packed));
++typedef struct _ddma_sg_buffer_setup ddma_sg_buffer_setup_t;
++
++/** Descriptor DMA Concatenation Buffer setup structure */
++struct _ddma_concat_buffer_setup_hdr {
++#define BS_CONCAT_VAL_HDR_LEN	4
++	/* The endpoint for which the buffer is to be set up */
++	uint8_t bEndpointAddress;
++	/* The count of descriptors to be used */
++	uint8_t bDescCount;
++	/* The total size of the transfer */
++	uint16_t wSize;
++} __attribute__ ((packed));
++typedef struct _ddma_concat_buffer_setup_hdr ddma_concat_buffer_setup_hdr_t;
++
++/** Descriptor DMA Concatenation Buffer setup structure */
++struct _ddma_concat_buffer_setup {
++	/* The SG header */
++	ddma_concat_buffer_setup_hdr_t hdr;
++
++	/* The XFER sizes pointer (allocated dynamically) */
++	uint16_t *wTxBytes;
++} __attribute__ ((packed));
++typedef struct _ddma_concat_buffer_setup ddma_concat_buffer_setup_t;
++
++/** Descriptor DMA Alignment Buffer setup structure */
++struct _ddma_align_buffer_setup {
++#define BS_ALIGN_VAL_HDR_LEN	2
++	uint8_t bEndpointAddress;
++	uint8_t bAlign;
++} __attribute__ ((packed));
++typedef struct _ddma_align_buffer_setup ddma_align_buffer_setup_t;
++
++/** Transmit FIFO Size setup structure */
++struct _tx_fifo_size_setup {
++	uint8_t bEndpointAddress;
++	uint16_t wDepth;
++} __attribute__ ((packed));
++typedef struct _tx_fifo_size_setup tx_fifo_size_setup_t;
++
++/** Transmit FIFO Size setup structure */
++struct _rx_fifo_size_setup {
++	uint16_t wDepth;
++} __attribute__ ((packed));
++typedef struct _rx_fifo_size_setup rx_fifo_size_setup_t;
++
++/**
++ * struct cfi_usb_ctrlrequest - the CFI implementation of the struct usb_ctrlrequest
++ * This structure encapsulates the standard usb_ctrlrequest and adds a pointer
++ * to the data returned in the data stage of a 3-stage Control Write requests.
++ */
++struct cfi_usb_ctrlrequest {
++	uint8_t bRequestType;
++	uint8_t bRequest;
++	uint16_t wValue;
++	uint16_t wIndex;
++	uint16_t wLength;
++	uint8_t *data;
++} UPACKED;
++
++/*---------------------------------------------------------------------------*/
++
++/**
++ * The CFI wrapper of the enabled and activated dwc_otg_pcd_ep structures.
++ * This structure is used to store the buffer setup data for any
++ * enabled endpoint in the PCD.
++ */
++struct cfi_ep {
++	/* Entry for the list container */
++	dwc_list_link_t lh;
++	/* Pointer to the active PCD endpoint structure */
++	struct dwc_otg_pcd_ep *ep;
++	/* The last descriptor in the chain of DMA descriptors of the endpoint */
++	struct dwc_otg_dma_desc *dma_desc_last;
++	/* The SG feature value */
++	ddma_sg_buffer_setup_t *bm_sg;
++	/* The Circular feature value */
++	ddma_sg_buffer_setup_t *bm_circ;
++	/* The Concatenation feature value */
++	ddma_concat_buffer_setup_t *bm_concat;
++	/* The Alignment feature value */
++	ddma_align_buffer_setup_t *bm_align;
++	/* XFER length */
++	uint32_t xfer_len;
++	/*
++	 * Count of DMA descriptors currently used.
++	 * The total should not exceed the MAX_DMA_DESCS_PER_EP value
++	 * defined in the dwc_otg_cil.h
++	 */
++	uint32_t desc_count;
++};
++typedef struct cfi_ep cfi_ep_t;
++
++typedef struct cfi_dma_buff {
++#define CFI_IN_BUF_LEN	1024
++#define CFI_OUT_BUF_LEN	1024
++	dma_addr_t addr;
++	uint8_t *buf;
++} cfi_dma_buff_t;
++
++struct cfiobject;
++
++/**
++ * This is the interface for the CFI operations.
++ *
++ * @param	ep_enable			Called when any endpoint is enabled and activated.
++ * @param	release				Called when the CFI object is released and it needs to correctly
++ *								deallocate the dynamic memory
++ * @param	ctrl_write_complete	Called when the data stage of the request is complete
++ */
++typedef struct cfi_ops {
++	int (*ep_enable) (struct cfiobject * cfi, struct dwc_otg_pcd * pcd,
++			  struct dwc_otg_pcd_ep * ep);
++	void *(*ep_alloc_buf) (struct cfiobject * cfi, struct dwc_otg_pcd * pcd,
++			       struct dwc_otg_pcd_ep * ep, dma_addr_t * dma,
++			       unsigned size, gfp_t flags);
++	void (*release) (struct cfiobject * cfi);
++	int (*ctrl_write_complete) (struct cfiobject * cfi,
++				    struct dwc_otg_pcd * pcd);
++	void (*build_descriptors) (struct cfiobject * cfi,
++				   struct dwc_otg_pcd * pcd,
++				   struct dwc_otg_pcd_ep * ep,
++				   dwc_otg_pcd_request_t * req);
++} cfi_ops_t;
++
++struct cfiobject {
++	cfi_ops_t ops;
++	struct dwc_otg_pcd *pcd;
++	struct usb_gadget *gadget;
++
++	/* Buffers used to send/receive CFI-related request data */
++	cfi_dma_buff_t buf_in;
++	cfi_dma_buff_t buf_out;
++
++	/* CFI specific Control request wrapper */
++	struct cfi_usb_ctrlrequest ctrl_req;
++
++	/* The list of active EP's in the PCD of type cfi_ep_t */
++	dwc_list_link_t active_eps;
++
++	/* This flag shall control the propagation of a specific request
++	 * to the gadget's processing routines.
++	 * 0 - no gadget handling
++	 * 1 - the gadget needs to know about this request (w/o completing a status
++	 * phase - just return a 0 to the _setup callback)
++	 */
++	uint8_t need_gadget_att;
++
++	/* Flag indicating whether the status IN phase needs to be
++	 * completed by the PCD
++	 */
++	uint8_t need_status_in_complete;
++};
++typedef struct cfiobject cfiobject_t;
++
++#define DUMP_MSG
++
++#if defined(DUMP_MSG)
++static inline void dump_msg(const u8 * buf, unsigned int length)
++{
++	unsigned int start, num, i;
++	char line[52], *p;
++
++	if (length >= 512)
++		return;
++
++	start = 0;
++	while (length > 0) {
++		num = min(length, 16u);
++		p = line;
++		for (i = 0; i < num; ++i) {
++			if (i == 8)
++				*p++ = ' ';
++			DWC_SPRINTF(p, " %02x", buf[i]);
++			p += 3;
++		}
++		*p = 0;
++		DWC_DEBUG("%6x: %s\n", start, line);
++		buf += num;
++		start += num;
++		length -= num;
++	}
++}
++#else
++static inline void dump_msg(const u8 * buf, unsigned int length)
++{
++}
++#endif
++
++/**
++ * This function returns a pointer to cfi_ep_t object with the addr address.
++ */
++static inline struct cfi_ep *get_cfi_ep_by_addr(struct cfiobject *cfi,
++						uint8_t addr)
++{
++	struct cfi_ep *pcfiep;
++	dwc_list_link_t *tmp;
++
++	DWC_LIST_FOREACH(tmp, &cfi->active_eps) {
++		pcfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
++
++		if (pcfiep->ep->desc->bEndpointAddress == addr) {
++			return pcfiep;
++		}
++	}
++
++	return NULL;
++}
++
++/**
++ * This function returns a pointer to cfi_ep_t object that matches
++ * the dwc_otg_pcd_ep object.
++ */
++static inline struct cfi_ep *get_cfi_ep_by_pcd_ep(struct cfiobject *cfi,
++						  struct dwc_otg_pcd_ep *ep)
++{
++	struct cfi_ep *pcfiep = NULL;
++	dwc_list_link_t *tmp;
++
++	DWC_LIST_FOREACH(tmp, &cfi->active_eps) {
++		pcfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
++		if (pcfiep->ep == ep) {
++			return pcfiep;
++		}
++	}
++	return NULL;
++}
++
++int cfi_setup(struct dwc_otg_pcd *pcd, struct cfi_usb_ctrlrequest *ctrl);
++
++#endif /* (__DWC_OTG_CFI_H__) */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_cil.c linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_cil.c
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_cil.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_cil.c	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,7151 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.c $
++ * $Revision: #191 $
++ * $Date: 2012/08/10 $
++ * $Change: 2047372 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ *
++ * The Core Interface Layer provides basic services for accessing and
++ * managing the DWC_otg hardware. These services are used by both the
++ * Host Controller Driver and the Peripheral Controller Driver.
++ *
++ * The CIL manages the memory map for the core so that the HCD and PCD
++ * don't have to do this separately. It also handles basic tasks like
++ * reading/writing the registers and data FIFOs in the controller.
++ * Some of the data access functions provide encapsulation of several
++ * operations required to perform a task, such as writing multiple
++ * registers to start a transfer. Finally, the CIL performs basic
++ * services that are not specific to either the host or device modes
++ * of operation. These services include management of the OTG Host
++ * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A
++ * Diagnostic API is also provided to allow testing of the controller
++ * hardware.
++ *
++ * The Core Interface Layer has the following requirements:
++ * - Provides basic controller operations.
++ * - Minimal use of OS services.
++ * - The OS services used will be abstracted by using inline functions
++ *	 or macros.
++ *
++ */
++
++#include "dwc_os.h"
++#include "dwc_otg_regs.h"
++#include "dwc_otg_cil.h"
++
++static int dwc_otg_setup_params(dwc_otg_core_if_t * core_if);
++
++/**
++ * This function is called to initialize the DWC_otg CSR data
++ * structures. The register addresses in the device and host
++ * structures are initialized from the base address supplied by the
++ * caller. The calling function must make the OS calls to get the
++ * base address of the DWC_otg controller registers. The core_params
++ * argument holds the parameters that specify how the core should be
++ * configured.
++ *
++ * @param reg_base_addr Base address of DWC_otg core registers
++ *
++ */
++dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t * reg_base_addr)
++{
++	dwc_otg_core_if_t *core_if = 0;
++	dwc_otg_dev_if_t *dev_if = 0;
++	dwc_otg_host_if_t *host_if = 0;
++	uint8_t *reg_base = (uint8_t *) reg_base_addr;
++	int i = 0;
++
++	DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, reg_base_addr);
++
++	core_if = DWC_ALLOC(sizeof(dwc_otg_core_if_t));
++
++	if (core_if == NULL) {
++		DWC_DEBUGPL(DBG_CIL,
++			    "Allocation of dwc_otg_core_if_t failed\n");
++		return 0;
++	}
++	core_if->core_global_regs = (dwc_otg_core_global_regs_t *) reg_base;
++
++	/*
++	 * Allocate the Device Mode structures.
++	 */
++	dev_if = DWC_ALLOC(sizeof(dwc_otg_dev_if_t));
++
++	if (dev_if == NULL) {
++		DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_dev_if_t failed\n");
++		DWC_FREE(core_if);
++		return 0;
++	}
++
++	dev_if->dev_global_regs =
++	    (dwc_otg_device_global_regs_t *) (reg_base +
++					      DWC_DEV_GLOBAL_REG_OFFSET);
++
++	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++		dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *)
++		    (reg_base + DWC_DEV_IN_EP_REG_OFFSET +
++		     (i * DWC_EP_REG_OFFSET));
++
++		dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *)
++		    (reg_base + DWC_DEV_OUT_EP_REG_OFFSET +
++		     (i * DWC_EP_REG_OFFSET));
++		DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n",
++			    i, &dev_if->in_ep_regs[i]->diepctl);
++		DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n",
++			    i, &dev_if->out_ep_regs[i]->doepctl);
++	}
++
++	dev_if->speed = 0;	// unknown
++
++	core_if->dev_if = dev_if;
++
++	/*
++	 * Allocate the Host Mode structures.
++	 */
++	host_if = DWC_ALLOC(sizeof(dwc_otg_host_if_t));
++
++	if (host_if == NULL) {
++		DWC_DEBUGPL(DBG_CIL,
++			    "Allocation of dwc_otg_host_if_t failed\n");
++		DWC_FREE(dev_if);
++		DWC_FREE(core_if);
++		return 0;
++	}
++
++	host_if->host_global_regs = (dwc_otg_host_global_regs_t *)
++	    (reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET);
++
++	host_if->hprt0 =
++	    (uint32_t *) (reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET);
++
++	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++		host_if->hc_regs[i] = (dwc_otg_hc_regs_t *)
++		    (reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET +
++		     (i * DWC_OTG_CHAN_REGS_OFFSET));
++		DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n",
++			    i, &host_if->hc_regs[i]->hcchar);
++	}
++
++	host_if->num_host_channels = MAX_EPS_CHANNELS;
++	core_if->host_if = host_if;
++
++	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++		core_if->data_fifo[i] =
++		    (uint32_t *) (reg_base + DWC_OTG_DATA_FIFO_OFFSET +
++				  (i * DWC_OTG_DATA_FIFO_SIZE));
++		DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08lx\n",
++			    i, (unsigned long)core_if->data_fifo[i]);
++	}
++
++	core_if->pcgcctl = (uint32_t *) (reg_base + DWC_OTG_PCGCCTL_OFFSET);
++
++	/* Initiate lx_state to L3 disconnected state */
++	core_if->lx_state = DWC_OTG_L3;
++	/*
++	 * Store the contents of the hardware configuration registers here for
++	 * easy access later.
++	 */
++	core_if->hwcfg1.d32 =
++	    DWC_READ_REG32(&core_if->core_global_regs->ghwcfg1);
++	core_if->hwcfg2.d32 =
++	    DWC_READ_REG32(&core_if->core_global_regs->ghwcfg2);
++	core_if->hwcfg3.d32 =
++	    DWC_READ_REG32(&core_if->core_global_regs->ghwcfg3);
++	core_if->hwcfg4.d32 =
++	    DWC_READ_REG32(&core_if->core_global_regs->ghwcfg4);
++
++	/* Force host mode to get HPTXFSIZ exact power on value */
++	{
++		gusbcfg_data_t gusbcfg = {.d32 = 0 };
++		gusbcfg.d32 =  DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++		gusbcfg.b.force_host_mode = 1;
++		DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32);
++		dwc_mdelay(100);
++		core_if->hptxfsiz.d32 =
++		DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz);
++		gusbcfg.d32 =  DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++		gusbcfg.b.force_host_mode = 0;
++		DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32);
++		dwc_mdelay(100);
++	}
++
++	DWC_DEBUGPL(DBG_CILV, "hwcfg1=%08x\n", core_if->hwcfg1.d32);
++	DWC_DEBUGPL(DBG_CILV, "hwcfg2=%08x\n", core_if->hwcfg2.d32);
++	DWC_DEBUGPL(DBG_CILV, "hwcfg3=%08x\n", core_if->hwcfg3.d32);
++	DWC_DEBUGPL(DBG_CILV, "hwcfg4=%08x\n", core_if->hwcfg4.d32);
++
++	core_if->hcfg.d32 =
++	    DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg);
++	core_if->dcfg.d32 =
++	    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
++
++	DWC_DEBUGPL(DBG_CILV, "hcfg=%08x\n", core_if->hcfg.d32);
++	DWC_DEBUGPL(DBG_CILV, "dcfg=%08x\n", core_if->dcfg.d32);
++
++	DWC_DEBUGPL(DBG_CILV, "op_mode=%0x\n", core_if->hwcfg2.b.op_mode);
++	DWC_DEBUGPL(DBG_CILV, "arch=%0x\n", core_if->hwcfg2.b.architecture);
++	DWC_DEBUGPL(DBG_CILV, "num_dev_ep=%d\n", core_if->hwcfg2.b.num_dev_ep);
++	DWC_DEBUGPL(DBG_CILV, "num_host_chan=%d\n",
++		    core_if->hwcfg2.b.num_host_chan);
++	DWC_DEBUGPL(DBG_CILV, "nonperio_tx_q_depth=0x%0x\n",
++		    core_if->hwcfg2.b.nonperio_tx_q_depth);
++	DWC_DEBUGPL(DBG_CILV, "host_perio_tx_q_depth=0x%0x\n",
++		    core_if->hwcfg2.b.host_perio_tx_q_depth);
++	DWC_DEBUGPL(DBG_CILV, "dev_token_q_depth=0x%0x\n",
++		    core_if->hwcfg2.b.dev_token_q_depth);
++
++	DWC_DEBUGPL(DBG_CILV, "Total FIFO SZ=%d\n",
++		    core_if->hwcfg3.b.dfifo_depth);
++	DWC_DEBUGPL(DBG_CILV, "xfer_size_cntr_width=%0x\n",
++		    core_if->hwcfg3.b.xfer_size_cntr_width);
++
++	/*
++	 * Set the SRP sucess bit for FS-I2c
++	 */
++	core_if->srp_success = 0;
++	core_if->srp_timer_started = 0;
++
++	/*
++	 * Create new workqueue and init works
++	 */
++	core_if->wq_otg = DWC_WORKQ_ALLOC("dwc_otg");
++	if (core_if->wq_otg == 0) {
++		DWC_WARN("DWC_WORKQ_ALLOC failed\n");
++		DWC_FREE(host_if);
++		DWC_FREE(dev_if);
++		DWC_FREE(core_if);
++		return 0;
++	}
++
++	core_if->snpsid = DWC_READ_REG32(&core_if->core_global_regs->gsnpsid);
++
++	DWC_PRINTF("Core Release: %x.%x%x%x\n",
++		   (core_if->snpsid >> 12 & 0xF),
++		   (core_if->snpsid >> 8 & 0xF),
++		   (core_if->snpsid >> 4 & 0xF), (core_if->snpsid & 0xF));
++
++	core_if->wkp_timer = DWC_TIMER_ALLOC("Wake Up Timer",
++					     w_wakeup_detected, core_if);
++	if (core_if->wkp_timer == 0) {
++		DWC_WARN("DWC_TIMER_ALLOC failed\n");
++		DWC_FREE(host_if);
++		DWC_FREE(dev_if);
++		DWC_WORKQ_FREE(core_if->wq_otg);
++		DWC_FREE(core_if);
++		return 0;
++	}
++
++	if (dwc_otg_setup_params(core_if)) {
++		DWC_WARN("Error while setting core params\n");
++	}
++
++	core_if->hibernation_suspend = 0;
++
++	/** ADP initialization */
++	dwc_otg_adp_init(core_if);
++
++	return core_if;
++}
++
++/**
++ * This function frees the structures allocated by dwc_otg_cil_init().
++ *
++ * @param core_if The core interface pointer returned from
++ * 		  dwc_otg_cil_init().
++ *
++ */
++void dwc_otg_cil_remove(dwc_otg_core_if_t * core_if)
++{
++	dctl_data_t dctl = {.d32 = 0 };
++	DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, core_if);
++
++	/* Disable all interrupts */
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, 1, 0);
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0);
++
++	dctl.b.sftdiscon = 1;
++	if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0,
++				 dctl.d32);
++	}
++
++	if (core_if->wq_otg) {
++		DWC_WORKQ_WAIT_WORK_DONE(core_if->wq_otg, 500);
++		DWC_WORKQ_FREE(core_if->wq_otg);
++	}
++	if (core_if->dev_if) {
++		DWC_FREE(core_if->dev_if);
++	}
++	if (core_if->host_if) {
++		DWC_FREE(core_if->host_if);
++	}
++
++	/** Remove ADP Stuff  */
++	dwc_otg_adp_remove(core_if);
++	if (core_if->core_params) {
++		DWC_FREE(core_if->core_params);
++	}
++	if (core_if->wkp_timer) {
++		DWC_TIMER_FREE(core_if->wkp_timer);
++	}
++	if (core_if->srp_timer) {
++		DWC_TIMER_FREE(core_if->srp_timer);
++	}
++	DWC_FREE(core_if);
++}
++
++/**
++ * This function enables the controller's Global Interrupt in the AHB Config
++ * register.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t * core_if)
++{
++	gahbcfg_data_t ahbcfg = {.d32 = 0 };
++	ahbcfg.b.glblintrmsk = 1;	/* Enable interrupts */
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32);
++}
++
++/**
++ * This function disables the controller's Global Interrupt in the AHB Config
++ * register.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t * core_if)
++{
++	gahbcfg_data_t ahbcfg = {.d32 = 0 };
++	ahbcfg.b.glblintrmsk = 1;	/* Disable interrupts */
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0);
++}
++
++/**
++ * This function initializes the commmon interrupts, used in both
++ * device and host modes.
++ *
++ * @param core_if Programming view of the DWC_otg controller
++ *
++ */
++static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	/* Clear any pending OTG Interrupts */
++	DWC_WRITE_REG32(&global_regs->gotgint, 0xFFFFFFFF);
++
++	/* Clear any pending interrupts */
++	DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF);
++
++	/*
++	 * Enable the interrupts in the GINTMSK.
++	 */
++	intr_mask.b.modemismatch = 1;
++	intr_mask.b.otgintr = 1;
++
++	if (!core_if->dma_enable) {
++		intr_mask.b.rxstsqlvl = 1;
++	}
++
++	intr_mask.b.conidstschng = 1;
++	intr_mask.b.wkupintr = 1;
++	intr_mask.b.disconnect = 0;
++	intr_mask.b.usbsuspend = 1;
++	intr_mask.b.sessreqintr = 1;
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	if (core_if->core_params->lpm_enable) {
++		intr_mask.b.lpmtranrcvd = 1;
++	}
++#endif
++	DWC_WRITE_REG32(&global_regs->gintmsk, intr_mask.d32);
++}
++
++/*
++ * The restore operation is modified to support Synopsys Emulated Powerdown and
++ * Hibernation. This function is for exiting from Device mode hibernation by
++ * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup.
++ * @param core_if Programming view of DWC_otg controller.
++ * @param rem_wakeup - indicates whether resume is initiated by Device or Host.
++ * @param reset - indicates whether resume is initiated by Reset.
++ */
++int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if,
++				       int rem_wakeup, int reset)
++{
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++	pcgcctl_data_t pcgcctl = {.d32 = 0 };
++	dctl_data_t dctl = {.d32 = 0 };
++
++	int timeout = 2000;
++
++	if (!core_if->hibernation_suspend) {
++		DWC_PRINTF("Already exited from Hibernation\n");
++		return 1;
++	}
++
++	DWC_DEBUGPL(DBG_PCD, "%s called\n", __FUNCTION__);
++	/* Switch-on voltage to the core */
++	gpwrdn.b.pwrdnswtch = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Reset core */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Assert Restore signal */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.restore = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++	dwc_udelay(10);
++
++	/* Disable power clamps */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnclmp = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	if (rem_wakeup) {
++		dwc_udelay(70);
++	}
++
++	/* Deassert Reset core */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++	dwc_udelay(10);
++
++	/* Disable PMU interrupt */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuintsel = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	/* Mask interrupts from gpwrdn */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.connect_det_msk = 1;
++	gpwrdn.b.srp_det_msk = 1;
++	gpwrdn.b.disconn_det_msk = 1;
++	gpwrdn.b.rst_det_msk = 1;
++	gpwrdn.b.lnstchng_msk = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	/* Indicates that we are going out from hibernation */
++	core_if->hibernation_suspend = 0;
++
++	/*
++	 * Set Restore Essential Regs bit in PCGCCTL register, restore_mode = 1
++	 * indicates restore from remote_wakeup
++	 */
++	restore_essential_regs(core_if, rem_wakeup, 0);
++
++	/*
++	 * Wait a little for seeing new value of variable hibernation_suspend if
++	 * Restore done interrupt received before polling
++	 */
++	dwc_udelay(10);
++
++	if (core_if->hibernation_suspend == 0) {
++		/*
++		 * Wait For Restore_done Interrupt. This mechanism of polling the
++		 * interrupt is introduced to avoid any possible race conditions
++		 */
++		do {
++			gintsts_data_t gintsts;
++			gintsts.d32 =
++			    DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++			if (gintsts.b.restoredone) {
++				gintsts.d32 = 0;
++				gintsts.b.restoredone = 1;
++				DWC_WRITE_REG32(&core_if->core_global_regs->
++						gintsts, gintsts.d32);
++				DWC_PRINTF("Restore Done Interrupt seen\n");
++				break;
++			}
++			dwc_udelay(10);
++		} while (--timeout);
++		if (!timeout) {
++			DWC_PRINTF("Restore Done interrupt wasn't generated here\n");
++		}
++	}
++	/* Clear all pending interupts */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++
++	/* De-assert Restore */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.restore = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	if (!rem_wakeup) {
++		pcgcctl.d32 = 0;
++		pcgcctl.b.rstpdwnmodule = 1;
++		DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
++	}
++
++	/* Restore GUSBCFG and DCFG */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg,
++			core_if->gr_backup->gusbcfg_local);
++	DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg,
++			core_if->dr_backup->dcfg);
++
++	/* De-assert Wakeup Logic */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuactv = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	if (!rem_wakeup) {
++		/* Set Device programming done bit */
++		dctl.b.pwronprgdone = 1;
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
++	} else {
++		/* Start Remote Wakeup Signaling */
++		dctl.d32 = core_if->dr_backup->dctl;
++		dctl.b.rmtwkupsig = 1;
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32);
++	}
++
++	dwc_mdelay(2);
++	/* Clear all pending interupts */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++
++	/* Restore global registers */
++	dwc_otg_restore_global_regs(core_if);
++	/* Restore device global registers */
++	dwc_otg_restore_dev_regs(core_if, rem_wakeup);
++
++	if (rem_wakeup) {
++		dwc_mdelay(7);
++		dctl.d32 = 0;
++		dctl.b.rmtwkupsig = 1;
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0);
++	}
++
++	core_if->hibernation_suspend = 0;
++	/* The core will be in ON STATE */
++	core_if->lx_state = DWC_OTG_L0;
++	DWC_PRINTF("Hibernation recovery completes here\n");
++
++	return 1;
++}
++
++/*
++ * The restore operation is modified to support Synopsys Emulated Powerdown and
++ * Hibernation. This function is for exiting from Host mode hibernation by
++ * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup.
++ * @param core_if Programming view of DWC_otg controller.
++ * @param rem_wakeup - indicates whether resume is initiated by Device or Host.
++ * @param reset - indicates whether resume is initiated by Reset.
++ */
++int dwc_otg_host_hibernation_restore(dwc_otg_core_if_t * core_if,
++				     int rem_wakeup, int reset)
++{
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++	hprt0_data_t hprt0 = {.d32 = 0 };
++
++	int timeout = 2000;
++
++	DWC_DEBUGPL(DBG_HCD, "%s called\n", __FUNCTION__);
++	/* Switch-on voltage to the core */
++	gpwrdn.b.pwrdnswtch = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Reset core */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Assert Restore signal */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.restore = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++	dwc_udelay(10);
++
++	/* Disable power clamps */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnclmp = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	if (!rem_wakeup) {
++		dwc_udelay(50);
++	}
++
++	/* Deassert Reset core */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++	dwc_udelay(10);
++
++	/* Disable PMU interrupt */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuintsel = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	gpwrdn.d32 = 0;
++	gpwrdn.b.connect_det_msk = 1;
++	gpwrdn.b.srp_det_msk = 1;
++	gpwrdn.b.disconn_det_msk = 1;
++	gpwrdn.b.rst_det_msk = 1;
++	gpwrdn.b.lnstchng_msk = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	/* Indicates that we are going out from hibernation */
++	core_if->hibernation_suspend = 0;
++
++	/* Set Restore Essential Regs bit in PCGCCTL register */
++	restore_essential_regs(core_if, rem_wakeup, 1);
++
++	/* Wait a little for seeing new value of variable hibernation_suspend if
++	 * Restore done interrupt received before polling */
++	dwc_udelay(10);
++
++	if (core_if->hibernation_suspend == 0) {
++		/* Wait For Restore_done Interrupt. This mechanism of polling the
++		 * interrupt is introduced to avoid any possible race conditions
++		 */
++		do {
++			gintsts_data_t gintsts;
++			gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++			if (gintsts.b.restoredone) {
++				gintsts.d32 = 0;
++				gintsts.b.restoredone = 1;
++			DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++				DWC_DEBUGPL(DBG_HCD,"Restore Done Interrupt seen\n");
++				break;
++			}
++			dwc_udelay(10);
++		} while (--timeout);
++		if (!timeout) {
++			DWC_WARN("Restore Done interrupt wasn't generated\n");
++		}
++	}
++
++	/* Set the flag's value to 0 again after receiving restore done interrupt */
++	core_if->hibernation_suspend = 0;
++
++	/* This step is not described in functional spec but if not wait for this
++	 * delay, mismatch interrupts occurred because just after restore core is
++	 * in Device mode(gintsts.curmode == 0) */
++	dwc_mdelay(100);
++
++	/* Clear all pending interrupts */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++
++	/* De-assert Restore */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.restore = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Restore GUSBCFG and HCFG */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg,
++			core_if->gr_backup->gusbcfg_local);
++	DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg,
++			core_if->hr_backup->hcfg_local);
++
++	/* De-assert Wakeup Logic */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuactv = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Start the Resume operation by programming HPRT0 */
++	hprt0.d32 = core_if->hr_backup->hprt0_local;
++	hprt0.b.prtpwr = 1;
++	hprt0.b.prtena = 0;
++	hprt0.b.prtsusp = 0;
++	DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++
++	DWC_PRINTF("Resume Starts Now\n");
++	if (!reset) {		// Indicates it is Resume Operation
++		hprt0.d32 = core_if->hr_backup->hprt0_local;
++		hprt0.b.prtres = 1;
++		hprt0.b.prtpwr = 1;
++		hprt0.b.prtena = 0;
++		hprt0.b.prtsusp = 0;
++		DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++
++		if (!rem_wakeup)
++			hprt0.b.prtres = 0;
++		/* Wait for Resume time and then program HPRT again */
++		dwc_mdelay(100);
++		DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++
++	} else {		// Indicates it is Reset Operation
++		hprt0.d32 = core_if->hr_backup->hprt0_local;
++		hprt0.b.prtrst = 1;
++		hprt0.b.prtpwr = 1;
++		hprt0.b.prtena = 0;
++		hprt0.b.prtsusp = 0;
++		DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++		/* Wait for Reset time and then program HPRT again */
++		dwc_mdelay(60);
++		hprt0.b.prtrst = 0;
++		DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++	}
++	/* Clear all interrupt status */
++	hprt0.d32 = dwc_otg_read_hprt0(core_if);
++	hprt0.b.prtconndet = 1;
++	hprt0.b.prtenchng = 1;
++	DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++
++	/* Clear all pending interupts */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++
++	/* Restore global registers */
++	dwc_otg_restore_global_regs(core_if);
++	/* Restore host global registers */
++	dwc_otg_restore_host_regs(core_if, reset);
++
++	/* The core will be in ON STATE */
++	core_if->lx_state = DWC_OTG_L0;
++	DWC_PRINTF("Hibernation recovery is complete here\n");
++	return 0;
++}
++
++/** Saves some register values into system memory. */
++int dwc_otg_save_global_regs(dwc_otg_core_if_t * core_if)
++{
++	struct dwc_otg_global_regs_backup *gr;
++	int i;
++
++	gr = core_if->gr_backup;
++	if (!gr) {
++		gr = DWC_ALLOC(sizeof(*gr));
++		if (!gr) {
++			return -DWC_E_NO_MEMORY;
++		}
++		core_if->gr_backup = gr;
++	}
++
++	gr->gotgctl_local = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
++	gr->gintmsk_local = DWC_READ_REG32(&core_if->core_global_regs->gintmsk);
++	gr->gahbcfg_local = DWC_READ_REG32(&core_if->core_global_regs->gahbcfg);
++	gr->gusbcfg_local = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++	gr->grxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz);
++	gr->gnptxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz);
++	gr->hptxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz);
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	gr->glpmcfg_local = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++#endif
++	gr->gi2cctl_local = DWC_READ_REG32(&core_if->core_global_regs->gi2cctl);
++	gr->pcgcctl_local = DWC_READ_REG32(core_if->pcgcctl);
++	gr->gdfifocfg_local =
++	    DWC_READ_REG32(&core_if->core_global_regs->gdfifocfg);
++	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++		gr->dtxfsiz_local[i] =
++		    DWC_READ_REG32(&(core_if->core_global_regs->dtxfsiz[i]));
++	}
++
++	DWC_DEBUGPL(DBG_ANY, "===========Backing Global registers==========\n");
++	DWC_DEBUGPL(DBG_ANY, "Backed up gotgctl   = %08x\n", gr->gotgctl_local);
++	DWC_DEBUGPL(DBG_ANY, "Backed up gintmsk   = %08x\n", gr->gintmsk_local);
++	DWC_DEBUGPL(DBG_ANY, "Backed up gahbcfg   = %08x\n", gr->gahbcfg_local);
++	DWC_DEBUGPL(DBG_ANY, "Backed up gusbcfg   = %08x\n", gr->gusbcfg_local);
++	DWC_DEBUGPL(DBG_ANY, "Backed up grxfsiz   = %08x\n", gr->grxfsiz_local);
++	DWC_DEBUGPL(DBG_ANY, "Backed up gnptxfsiz = %08x\n",
++		    gr->gnptxfsiz_local);
++	DWC_DEBUGPL(DBG_ANY, "Backed up hptxfsiz  = %08x\n",
++		    gr->hptxfsiz_local);
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	DWC_DEBUGPL(DBG_ANY, "Backed up glpmcfg   = %08x\n", gr->glpmcfg_local);
++#endif
++	DWC_DEBUGPL(DBG_ANY, "Backed up gi2cctl   = %08x\n", gr->gi2cctl_local);
++	DWC_DEBUGPL(DBG_ANY, "Backed up pcgcctl   = %08x\n", gr->pcgcctl_local);
++	DWC_DEBUGPL(DBG_ANY,"Backed up gdfifocfg   = %08x\n",gr->gdfifocfg_local);
++
++	return 0;
++}
++
++/** Saves GINTMSK register before setting the msk bits. */
++int dwc_otg_save_gintmsk_reg(dwc_otg_core_if_t * core_if)
++{
++	struct dwc_otg_global_regs_backup *gr;
++
++	gr = core_if->gr_backup;
++	if (!gr) {
++		gr = DWC_ALLOC(sizeof(*gr));
++		if (!gr) {
++			return -DWC_E_NO_MEMORY;
++		}
++		core_if->gr_backup = gr;
++	}
++
++	gr->gintmsk_local = DWC_READ_REG32(&core_if->core_global_regs->gintmsk);
++
++	DWC_DEBUGPL(DBG_ANY,"=============Backing GINTMSK registers============\n");
++	DWC_DEBUGPL(DBG_ANY, "Backed up gintmsk   = %08x\n", gr->gintmsk_local);
++
++	return 0;
++}
++
++int dwc_otg_save_dev_regs(dwc_otg_core_if_t * core_if)
++{
++	struct dwc_otg_dev_regs_backup *dr;
++	int i;
++
++	dr = core_if->dr_backup;
++	if (!dr) {
++		dr = DWC_ALLOC(sizeof(*dr));
++		if (!dr) {
++			return -DWC_E_NO_MEMORY;
++		}
++		core_if->dr_backup = dr;
++	}
++
++	dr->dcfg = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
++	dr->dctl = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl);
++	dr->daintmsk =
++	    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk);
++	dr->diepmsk =
++	    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->diepmsk);
++	dr->doepmsk =
++	    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->doepmsk);
++
++	for (i = 0; i < core_if->dev_if->num_in_eps; ++i) {
++		dr->diepctl[i] =
++		    DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl);
++		dr->dieptsiz[i] =
++		    DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->dieptsiz);
++		dr->diepdma[i] =
++		    DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepdma);
++	}
++
++	DWC_DEBUGPL(DBG_ANY,
++		    "=============Backing Host registers==============\n");
++	DWC_DEBUGPL(DBG_ANY, "Backed up dcfg            = %08x\n", dr->dcfg);
++	DWC_DEBUGPL(DBG_ANY, "Backed up dctl        = %08x\n", dr->dctl);
++	DWC_DEBUGPL(DBG_ANY, "Backed up daintmsk            = %08x\n",
++		    dr->daintmsk);
++	DWC_DEBUGPL(DBG_ANY, "Backed up diepmsk        = %08x\n", dr->diepmsk);
++	DWC_DEBUGPL(DBG_ANY, "Backed up doepmsk        = %08x\n", dr->doepmsk);
++	for (i = 0; i < core_if->dev_if->num_in_eps; ++i) {
++		DWC_DEBUGPL(DBG_ANY, "Backed up diepctl[%d]        = %08x\n", i,
++			    dr->diepctl[i]);
++		DWC_DEBUGPL(DBG_ANY, "Backed up dieptsiz[%d]        = %08x\n",
++			    i, dr->dieptsiz[i]);
++		DWC_DEBUGPL(DBG_ANY, "Backed up diepdma[%d]        = %08x\n", i,
++			    dr->diepdma[i]);
++	}
++
++	return 0;
++}
++
++int dwc_otg_save_host_regs(dwc_otg_core_if_t * core_if)
++{
++	struct dwc_otg_host_regs_backup *hr;
++	int i;
++
++	hr = core_if->hr_backup;
++	if (!hr) {
++		hr = DWC_ALLOC(sizeof(*hr));
++		if (!hr) {
++			return -DWC_E_NO_MEMORY;
++		}
++		core_if->hr_backup = hr;
++	}
++
++	hr->hcfg_local =
++	    DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg);
++	hr->haintmsk_local =
++	    DWC_READ_REG32(&core_if->host_if->host_global_regs->haintmsk);
++	for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) {
++		hr->hcintmsk_local[i] =
++		    DWC_READ_REG32(&core_if->host_if->hc_regs[i]->hcintmsk);
++	}
++	hr->hprt0_local = DWC_READ_REG32(core_if->host_if->hprt0);
++	hr->hfir_local =
++	    DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir);
++
++	DWC_DEBUGPL(DBG_ANY,
++		    "=============Backing Host registers===============\n");
++	DWC_DEBUGPL(DBG_ANY, "Backed up hcfg		= %08x\n",
++		    hr->hcfg_local);
++	DWC_DEBUGPL(DBG_ANY, "Backed up haintmsk = %08x\n", hr->haintmsk_local);
++	for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) {
++		DWC_DEBUGPL(DBG_ANY, "Backed up hcintmsk[%02d]=%08x\n", i,
++			    hr->hcintmsk_local[i]);
++	}
++	DWC_DEBUGPL(DBG_ANY, "Backed up hprt0           = %08x\n",
++		    hr->hprt0_local);
++	DWC_DEBUGPL(DBG_ANY, "Backed up hfir           = %08x\n",
++		    hr->hfir_local);
++
++	return 0;
++}
++
++int dwc_otg_restore_global_regs(dwc_otg_core_if_t *core_if)
++{
++	struct dwc_otg_global_regs_backup *gr;
++	int i;
++
++	gr = core_if->gr_backup;
++	if (!gr) {
++		return -DWC_E_INVALID;
++	}
++
++	DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, gr->gotgctl_local);
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gr->gintmsk_local);
++	DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gr->gusbcfg_local);
++	DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gr->gahbcfg_local);
++	DWC_WRITE_REG32(&core_if->core_global_regs->grxfsiz, gr->grxfsiz_local);
++	DWC_WRITE_REG32(&core_if->core_global_regs->gnptxfsiz,
++			gr->gnptxfsiz_local);
++	DWC_WRITE_REG32(&core_if->core_global_regs->hptxfsiz,
++			gr->hptxfsiz_local);
++	DWC_WRITE_REG32(&core_if->core_global_regs->gdfifocfg,
++			gr->gdfifocfg_local);
++	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++		DWC_WRITE_REG32(&core_if->core_global_regs->dtxfsiz[i],
++				gr->dtxfsiz_local[i]);
++	}
++
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++	DWC_WRITE_REG32(core_if->host_if->hprt0, 0x0000100A);
++	DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg,
++			(gr->gahbcfg_local));
++	return 0;
++}
++
++int dwc_otg_restore_dev_regs(dwc_otg_core_if_t * core_if, int rem_wakeup)
++{
++	struct dwc_otg_dev_regs_backup *dr;
++	int i;
++
++	dr = core_if->dr_backup;
++
++	if (!dr) {
++		return -DWC_E_INVALID;
++	}
++
++	if (!rem_wakeup) {
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl,
++				dr->dctl);
++	}
++
++	DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daintmsk, dr->daintmsk);
++	DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->diepmsk, dr->diepmsk);
++	DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->doepmsk, dr->doepmsk);
++
++	for (i = 0; i < core_if->dev_if->num_in_eps; ++i) {
++		DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->dieptsiz, dr->dieptsiz[i]);
++		DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->diepdma, dr->diepdma[i]);
++		DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl, dr->diepctl[i]);
++	}
++
++	return 0;
++}
++
++int dwc_otg_restore_host_regs(dwc_otg_core_if_t * core_if, int reset)
++{
++	struct dwc_otg_host_regs_backup *hr;
++	int i;
++	hr = core_if->hr_backup;
++
++	if (!hr) {
++		return -DWC_E_INVALID;
++	}
++
++	DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hr->hcfg_local);
++	//if (!reset)
++	//{
++	//      DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hfir, hr->hfir_local);
++	//}
++
++	DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haintmsk,
++			hr->haintmsk_local);
++	for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) {
++		DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcintmsk,
++				hr->hcintmsk_local[i]);
++	}
++
++	return 0;
++}
++
++int restore_lpm_i2c_regs(dwc_otg_core_if_t * core_if)
++{
++	struct dwc_otg_global_regs_backup *gr;
++
++	gr = core_if->gr_backup;
++
++	/* Restore values for LPM and I2C */
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, gr->glpmcfg_local);
++#endif
++	DWC_WRITE_REG32(&core_if->core_global_regs->gi2cctl, gr->gi2cctl_local);
++
++	return 0;
++}
++
++int restore_essential_regs(dwc_otg_core_if_t * core_if, int rmode, int is_host)
++{
++	struct dwc_otg_global_regs_backup *gr;
++	pcgcctl_data_t pcgcctl = {.d32 = 0 };
++	gahbcfg_data_t gahbcfg = {.d32 = 0 };
++	gusbcfg_data_t gusbcfg = {.d32 = 0 };
++	gintmsk_data_t gintmsk = {.d32 = 0 };
++
++	/* Restore LPM and I2C registers */
++	restore_lpm_i2c_regs(core_if);
++
++	/* Set PCGCCTL to 0 */
++	DWC_WRITE_REG32(core_if->pcgcctl, 0x00000000);
++
++	gr = core_if->gr_backup;
++	/* Load restore values for [31:14] bits */
++	DWC_WRITE_REG32(core_if->pcgcctl,
++			((gr->pcgcctl_local & 0xffffc000) | 0x00020000));
++
++	/* Umnask global Interrupt in GAHBCFG and restore it */
++	gahbcfg.d32 = gr->gahbcfg_local;
++	gahbcfg.b.glblintrmsk = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gahbcfg.d32);
++
++	/* Clear all pending interupts */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++
++	/* Unmask restore done interrupt */
++	gintmsk.b.restoredone = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32);
++
++	/* Restore GUSBCFG and HCFG/DCFG */
++	gusbcfg.d32 = core_if->gr_backup->gusbcfg_local;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32);
++
++	if (is_host) {
++		hcfg_data_t hcfg = {.d32 = 0 };
++		hcfg.d32 = core_if->hr_backup->hcfg_local;
++		DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg,
++				hcfg.d32);
++
++		/* Load restore values for [31:14] bits */
++		pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000;
++		pcgcctl.d32 = gr->pcgcctl_local | 0x00020000;
++
++		if (rmode)
++			pcgcctl.b.restoremode = 1;
++		DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
++		dwc_udelay(10);
++
++		/* Load restore values for [31:14] bits and set EssRegRestored bit */
++		pcgcctl.d32 = gr->pcgcctl_local | 0xffffc000;
++		pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000;
++		pcgcctl.b.ess_reg_restored = 1;
++		if (rmode)
++			pcgcctl.b.restoremode = 1;
++		DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
++	} else {
++		dcfg_data_t dcfg = {.d32 = 0 };
++		dcfg.d32 = core_if->dr_backup->dcfg;
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32);
++
++		/* Load restore values for [31:14] bits */
++		pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000;
++		pcgcctl.d32 = gr->pcgcctl_local | 0x00020000;
++		if (!rmode) {
++			pcgcctl.d32 |= 0x208;
++		}
++		DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
++		dwc_udelay(10);
++
++		/* Load restore values for [31:14] bits */
++		pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000;
++		pcgcctl.d32 = gr->pcgcctl_local | 0x00020000;
++		pcgcctl.b.ess_reg_restored = 1;
++		if (!rmode)
++			pcgcctl.d32 |= 0x208;
++		DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
++	}
++
++	return 0;
++}
++
++/**
++ * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY
++ * type.
++ */
++static void init_fslspclksel(dwc_otg_core_if_t * core_if)
++{
++	uint32_t val;
++	hcfg_data_t hcfg;
++
++	if (((core_if->hwcfg2.b.hs_phy_type == 2) &&
++	     (core_if->hwcfg2.b.fs_phy_type == 1) &&
++	     (core_if->core_params->ulpi_fs_ls)) ||
++	    (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
++		/* Full speed PHY */
++		val = DWC_HCFG_48_MHZ;
++	} else {
++		/* High speed PHY running at full speed or high speed */
++		val = DWC_HCFG_30_60_MHZ;
++	}
++
++	DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val);
++	hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg);
++	hcfg.b.fslspclksel = val;
++	DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32);
++}
++
++/**
++ * Initializes the DevSpd field of the DCFG register depending on the PHY type
++ * and the enumeration speed of the device.
++ */
++static void init_devspd(dwc_otg_core_if_t * core_if)
++{
++	uint32_t val;
++	dcfg_data_t dcfg;
++
++	if (((core_if->hwcfg2.b.hs_phy_type == 2) &&
++	     (core_if->hwcfg2.b.fs_phy_type == 1) &&
++	     (core_if->core_params->ulpi_fs_ls)) ||
++	    (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
++		/* Full speed PHY */
++		val = 0x3;
++	} else if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) {
++		/* High speed PHY running at full speed */
++		val = 0x1;
++	} else {
++		/* High speed PHY running at high speed */
++		val = 0x0;
++	}
++
++	DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val);
++
++	dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
++	dcfg.b.devspd = val;
++	DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32);
++}
++
++/**
++ * This function calculates the number of IN EPS
++ * using GHWCFG1 and GHWCFG2 registers values
++ *
++ * @param core_if Programming view of the DWC_otg controller
++ */
++static uint32_t calc_num_in_eps(dwc_otg_core_if_t * core_if)
++{
++	uint32_t num_in_eps = 0;
++	uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep;
++	uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 3;
++	uint32_t num_tx_fifos = core_if->hwcfg4.b.num_in_eps;
++	int i;
++
++	for (i = 0; i < num_eps; ++i) {
++		if (!(hwcfg1 & 0x1))
++			num_in_eps++;
++
++		hwcfg1 >>= 2;
++	}
++
++	if (core_if->hwcfg4.b.ded_fifo_en) {
++		num_in_eps =
++		    (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps;
++	}
++
++	return num_in_eps;
++}
++
++/**
++ * This function calculates the number of OUT EPS
++ * using GHWCFG1 and GHWCFG2 registers values
++ *
++ * @param core_if Programming view of the DWC_otg controller
++ */
++static uint32_t calc_num_out_eps(dwc_otg_core_if_t * core_if)
++{
++	uint32_t num_out_eps = 0;
++	uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep;
++	uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 2;
++	int i;
++
++	for (i = 0; i < num_eps; ++i) {
++		if (!(hwcfg1 & 0x1))
++			num_out_eps++;
++
++		hwcfg1 >>= 2;
++	}
++	return num_out_eps;
++}
++
++/**
++ * This function initializes the DWC_otg controller registers and
++ * prepares the core for device mode or host mode operation.
++ *
++ * @param core_if Programming view of the DWC_otg controller
++ *
++ */
++void dwc_otg_core_init(dwc_otg_core_if_t * core_if)
++{
++	int i = 0;
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	gahbcfg_data_t ahbcfg = {.d32 = 0 };
++	gusbcfg_data_t usbcfg = {.d32 = 0 };
++	gi2cctl_data_t i2cctl = {.d32 = 0 };
++
++	DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p) regs at %p\n",
++                    core_if, global_regs);
++
++	/* Common Initialization */
++	usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
++
++	/* Program the ULPI External VBUS bit if needed */
++	usbcfg.b.ulpi_ext_vbus_drv =
++	    (core_if->core_params->phy_ulpi_ext_vbus ==
++	     DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0;
++
++	/* Set external TS Dline pulsing */
++	usbcfg.b.term_sel_dl_pulse =
++	    (core_if->core_params->ts_dline == 1) ? 1 : 0;
++	DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
++
++	/* Reset the Controller */
++	dwc_otg_core_reset(core_if);
++
++	core_if->adp_enable = core_if->core_params->adp_supp_enable;
++	core_if->power_down = core_if->core_params->power_down;
++	core_if->otg_sts = 0;
++
++	/* Initialize parameters from Hardware configuration registers. */
++	dev_if->num_in_eps = calc_num_in_eps(core_if);
++	dev_if->num_out_eps = calc_num_out_eps(core_if);
++
++	DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n",
++		    core_if->hwcfg4.b.num_dev_perio_in_ep);
++
++	for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++) {
++		dev_if->perio_tx_fifo_size[i] =
++		    DWC_READ_REG32(&global_regs->dtxfsiz[i]) >> 16;
++		DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n",
++			    i, dev_if->perio_tx_fifo_size[i]);
++	}
++
++	for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++		dev_if->tx_fifo_size[i] =
++		    DWC_READ_REG32(&global_regs->dtxfsiz[i]) >> 16;
++		DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n",
++			    i, dev_if->tx_fifo_size[i]);
++	}
++
++	core_if->total_fifo_size = core_if->hwcfg3.b.dfifo_depth;
++	core_if->rx_fifo_size = DWC_READ_REG32(&global_regs->grxfsiz);
++	core_if->nperio_tx_fifo_size =
++	    DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16;
++
++	DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", core_if->total_fifo_size);
++	DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", core_if->rx_fifo_size);
++	DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n",
++		    core_if->nperio_tx_fifo_size);
++
++	/* This programming sequence needs to happen in FS mode before any other
++	 * programming occurs */
++	if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) &&
++	    (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
++		/* If FS mode with FS PHY */
++
++		/* core_init() is now called on every switch so only call the
++		 * following for the first time through. */
++		if (!core_if->phy_init_done) {
++			core_if->phy_init_done = 1;
++			DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n");
++			usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
++			usbcfg.b.physel = 1;
++			DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
++
++			/* Reset after a PHY select */
++			dwc_otg_core_reset(core_if);
++		}
++
++		/* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS.      Also
++		 * do this on HNP Dev/Host mode switches (done in dev_init and
++		 * host_init). */
++		if (dwc_otg_is_host_mode(core_if)) {
++			init_fslspclksel(core_if);
++		} else {
++			init_devspd(core_if);
++		}
++
++		if (core_if->core_params->i2c_enable) {
++			DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n");
++			/* Program GUSBCFG.OtgUtmifsSel to I2C */
++			usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
++			usbcfg.b.otgutmifssel = 1;
++			DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
++
++			/* Program GI2CCTL.I2CEn */
++			i2cctl.d32 = DWC_READ_REG32(&global_regs->gi2cctl);
++			i2cctl.b.i2cdevaddr = 1;
++			i2cctl.b.i2cen = 0;
++			DWC_WRITE_REG32(&global_regs->gi2cctl, i2cctl.d32);
++			i2cctl.b.i2cen = 1;
++			DWC_WRITE_REG32(&global_regs->gi2cctl, i2cctl.d32);
++		}
++
++	} /* endif speed == DWC_SPEED_PARAM_FULL */
++	else {
++		/* High speed PHY. */
++		if (!core_if->phy_init_done) {
++			core_if->phy_init_done = 1;
++			/* HS PHY parameters.  These parameters are preserved
++			 * during soft reset so only program the first time.  Do
++			 * a soft reset immediately after setting phyif.  */
++
++			if (core_if->core_params->phy_type == 2) {
++				/* ULPI interface */
++				usbcfg.b.ulpi_utmi_sel = 1;
++				usbcfg.b.phyif = 0;
++				usbcfg.b.ddrsel =
++				    core_if->core_params->phy_ulpi_ddr;
++			} else if (core_if->core_params->phy_type == 1) {
++				/* UTMI+ interface */
++				usbcfg.b.ulpi_utmi_sel = 0;
++				if (core_if->core_params->phy_utmi_width == 16) {
++					usbcfg.b.phyif = 1;
++
++				} else {
++					usbcfg.b.phyif = 0;
++				}
++			} else {
++				DWC_ERROR("FS PHY TYPE\n");
++			}
++			DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
++			/* Reset after setting the PHY parameters */
++			dwc_otg_core_reset(core_if);
++		}
++	}
++
++	if ((core_if->hwcfg2.b.hs_phy_type == 2) &&
++	    (core_if->hwcfg2.b.fs_phy_type == 1) &&
++	    (core_if->core_params->ulpi_fs_ls)) {
++		DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n");
++		usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
++		usbcfg.b.ulpi_fsls = 1;
++		usbcfg.b.ulpi_clk_sus_m = 1;
++		DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
++	} else {
++		usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
++		usbcfg.b.ulpi_fsls = 0;
++		usbcfg.b.ulpi_clk_sus_m = 0;
++		DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
++	}
++
++	/* Program the GAHBCFG Register. */
++	switch (core_if->hwcfg2.b.architecture) {
++
++	case DWC_SLAVE_ONLY_ARCH:
++		DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n");
++		ahbcfg.b.nptxfemplvl_txfemplvl =
++		    DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
++		ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
++		core_if->dma_enable = 0;
++		core_if->dma_desc_enable = 0;
++		break;
++
++	case DWC_EXT_DMA_ARCH:
++		DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n");
++		{
++			uint8_t brst_sz = core_if->core_params->dma_burst_size;
++			ahbcfg.b.hburstlen = 0;
++			while (brst_sz > 1) {
++				ahbcfg.b.hburstlen++;
++				brst_sz >>= 1;
++			}
++		}
++		core_if->dma_enable = (core_if->core_params->dma_enable != 0);
++		core_if->dma_desc_enable =
++		    (core_if->core_params->dma_desc_enable != 0);
++		break;
++
++	case DWC_INT_DMA_ARCH:
++		DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n");
++		/* Old value was DWC_GAHBCFG_INT_DMA_BURST_INCR - done for
++		  Host mode ISOC in issue fix - vahrama */
++		/* Broadcom had altered to (1<<3)|(0<<0) - WRESP=1, max 4 beats */
++		ahbcfg.b.hburstlen = (1<<3)|(0<<0);//DWC_GAHBCFG_INT_DMA_BURST_INCR4;
++		core_if->dma_enable = (core_if->core_params->dma_enable != 0);
++		core_if->dma_desc_enable =
++		    (core_if->core_params->dma_desc_enable != 0);
++		break;
++
++	}
++	if (core_if->dma_enable) {
++		if (core_if->dma_desc_enable) {
++			DWC_PRINTF("Using Descriptor DMA mode\n");
++		} else {
++			DWC_PRINTF("Using Buffer DMA mode\n");
++
++		}
++	} else {
++		DWC_PRINTF("Using Slave mode\n");
++		core_if->dma_desc_enable = 0;
++	}
++
++	if (core_if->core_params->ahb_single) {
++		ahbcfg.b.ahbsingle = 1;
++	}
++
++	ahbcfg.b.dmaenable = core_if->dma_enable;
++	DWC_WRITE_REG32(&global_regs->gahbcfg, ahbcfg.d32);
++
++	core_if->en_multiple_tx_fifo = core_if->hwcfg4.b.ded_fifo_en;
++
++	core_if->pti_enh_enable = core_if->core_params->pti_enable != 0;
++	core_if->multiproc_int_enable = core_if->core_params->mpi_enable;
++	DWC_PRINTF("Periodic Transfer Interrupt Enhancement - %s\n",
++		   ((core_if->pti_enh_enable) ? "enabled" : "disabled"));
++	DWC_PRINTF("Multiprocessor Interrupt Enhancement - %s\n",
++		   ((core_if->multiproc_int_enable) ? "enabled" : "disabled"));
++
++	/*
++	 * Program the GUSBCFG register.
++	 */
++	usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
++
++	switch (core_if->hwcfg2.b.op_mode) {
++	case DWC_MODE_HNP_SRP_CAPABLE:
++		usbcfg.b.hnpcap = (core_if->core_params->otg_cap ==
++				   DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE);
++		usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
++				   DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++		break;
++
++	case DWC_MODE_SRP_ONLY_CAPABLE:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
++				   DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++		break;
++
++	case DWC_MODE_NO_HNP_SRP_CAPABLE:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = 0;
++		break;
++
++	case DWC_MODE_SRP_CAPABLE_DEVICE:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
++				   DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++		break;
++
++	case DWC_MODE_NO_SRP_CAPABLE_DEVICE:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = 0;
++		break;
++
++	case DWC_MODE_SRP_CAPABLE_HOST:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
++				   DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++		break;
++
++	case DWC_MODE_NO_SRP_CAPABLE_HOST:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = 0;
++		break;
++	}
++
++	DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
++
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	if (core_if->core_params->lpm_enable) {
++		glpmcfg_data_t lpmcfg = {.d32 = 0 };
++
++		/* To enable LPM support set lpm_cap_en bit */
++		lpmcfg.b.lpm_cap_en = 1;
++
++		/* Make AppL1Res ACK */
++		lpmcfg.b.appl_resp = 1;
++
++		/* Retry 3 times */
++		lpmcfg.b.retry_count = 3;
++
++		DWC_MODIFY_REG32(&core_if->core_global_regs->glpmcfg,
++				 0, lpmcfg.d32);
++
++	}
++#endif
++	if (core_if->core_params->ic_usb_cap) {
++		gusbcfg_data_t gusbcfg = {.d32 = 0 };
++		gusbcfg.b.ic_usb_cap = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gusbcfg,
++				 0, gusbcfg.d32);
++	}
++	{
++		gotgctl_data_t gotgctl = {.d32 = 0 };
++		gotgctl.b.otgver = core_if->core_params->otg_ver;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gotgctl, 0,
++				 gotgctl.d32);
++		/* Set OTG version supported */
++		core_if->otg_ver = core_if->core_params->otg_ver;
++		DWC_PRINTF("OTG VER PARAM: %d, OTG VER FLAG: %d\n",
++			   core_if->core_params->otg_ver, core_if->otg_ver);
++	}
++
++
++	/* Enable common interrupts */
++	dwc_otg_enable_common_interrupts(core_if);
++
++	/* Do device or host intialization based on mode during PCD
++	 * and HCD initialization  */
++	if (dwc_otg_is_host_mode(core_if)) {
++		DWC_DEBUGPL(DBG_ANY, "Host Mode\n");
++		core_if->op_state = A_HOST;
++	} else {
++		DWC_DEBUGPL(DBG_ANY, "Device Mode\n");
++		core_if->op_state = B_PERIPHERAL;
++#ifdef DWC_DEVICE_ONLY
++		dwc_otg_core_dev_init(core_if);
++#endif
++	}
++}
++
++/**
++ * This function enables the Device mode interrupts.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ */
++void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t * core_if)
++{
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++
++	DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
++
++	/* Disable all interrupts. */
++	DWC_WRITE_REG32(&global_regs->gintmsk, 0);
++
++	/* Clear any pending interrupts */
++	DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF);
++
++	/* Enable the common interrupts */
++	dwc_otg_enable_common_interrupts(core_if);
++
++	/* Enable interrupts */
++	intr_mask.b.usbreset = 1;
++	intr_mask.b.enumdone = 1;
++	/* Disable Disconnect interrupt in Device mode */
++	intr_mask.b.disconnect = 0;
++
++	if (!core_if->multiproc_int_enable) {
++		intr_mask.b.inepintr = 1;
++		intr_mask.b.outepintr = 1;
++	}
++
++	intr_mask.b.erlysuspend = 1;
++
++	if (core_if->en_multiple_tx_fifo == 0) {
++		intr_mask.b.epmismatch = 1;
++	}
++
++	//intr_mask.b.incomplisoout = 1;
++	intr_mask.b.incomplisoin = 1;
++
++/* Enable the ignore frame number for ISOC xfers - MAS */
++/* Disable to support high bandwith ISOC transfers - manukz */
++#if 0
++#ifdef DWC_UTE_PER_IO
++	if (core_if->dma_enable) {
++		if (core_if->dma_desc_enable) {
++			dctl_data_t dctl1 = {.d32 = 0 };
++			dctl1.b.ifrmnum = 1;
++			DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
++					 dctl, 0, dctl1.d32);
++			DWC_DEBUG("----Enabled Ignore frame number (0x%08x)",
++				  DWC_READ_REG32(&core_if->dev_if->
++						 dev_global_regs->dctl));
++		}
++	}
++#endif
++#endif
++#ifdef DWC_EN_ISOC
++	if (core_if->dma_enable) {
++		if (core_if->dma_desc_enable == 0) {
++			if (core_if->pti_enh_enable) {
++				dctl_data_t dctl = {.d32 = 0 };
++				dctl.b.ifrmnum = 1;
++				DWC_MODIFY_REG32(&core_if->
++						 dev_if->dev_global_regs->dctl,
++						 0, dctl.d32);
++			} else {
++				intr_mask.b.incomplisoin = 1;
++				intr_mask.b.incomplisoout = 1;
++			}
++		}
++	} else {
++		intr_mask.b.incomplisoin = 1;
++		intr_mask.b.incomplisoout = 1;
++	}
++#endif /* DWC_EN_ISOC */
++
++	/** @todo NGS: Should this be a module parameter? */
++#ifdef USE_PERIODIC_EP
++	intr_mask.b.isooutdrop = 1;
++	intr_mask.b.eopframe = 1;
++	intr_mask.b.incomplisoin = 1;
++	intr_mask.b.incomplisoout = 1;
++#endif
++
++	DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
++
++	DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__,
++		    DWC_READ_REG32(&global_regs->gintmsk));
++}
++
++/**
++ * This function initializes the DWC_otg controller registers for
++ * device mode.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ *
++ */
++void dwc_otg_core_dev_init(dwc_otg_core_if_t * core_if)
++{
++	int i;
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	dwc_otg_core_params_t *params = core_if->core_params;
++	dcfg_data_t dcfg = {.d32 = 0 };
++	depctl_data_t diepctl = {.d32 = 0 };
++	grstctl_t resetctl = {.d32 = 0 };
++	uint32_t rx_fifo_size;
++	fifosize_data_t nptxfifosize;
++	fifosize_data_t txfifosize;
++	dthrctl_data_t dthrctl;
++	fifosize_data_t ptxfifosize;
++	uint16_t rxfsiz, nptxfsiz;
++	gdfifocfg_data_t gdfifocfg = {.d32 = 0 };
++	hwcfg3_data_t hwcfg3 = {.d32 = 0 };
++
++	/* Restart the Phy Clock */
++	DWC_WRITE_REG32(core_if->pcgcctl, 0);
++
++	/* Device configuration register */
++	init_devspd(core_if);
++	dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg);
++	dcfg.b.descdma = (core_if->dma_desc_enable) ? 1 : 0;
++	dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80;
++	/* Enable Device OUT NAK in case of DDMA mode*/
++	if (core_if->core_params->dev_out_nak) {
++		dcfg.b.endevoutnak = 1;
++	}
++
++	if (core_if->core_params->cont_on_bna) {
++		dctl_data_t dctl = {.d32 = 0 };
++		dctl.b.encontonbna = 1;
++		DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, 0, dctl.d32);
++	}
++
++
++	DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
++
++	/* Configure data FIFO sizes */
++	if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
++		DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n",
++			    core_if->total_fifo_size);
++		DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n",
++			    params->dev_rx_fifo_size);
++		DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n",
++			    params->dev_nperio_tx_fifo_size);
++
++		/* Rx FIFO */
++		DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n",
++			    DWC_READ_REG32(&global_regs->grxfsiz));
++
++#ifdef DWC_UTE_CFI
++		core_if->pwron_rxfsiz = DWC_READ_REG32(&global_regs->grxfsiz);
++		core_if->init_rxfsiz = params->dev_rx_fifo_size;
++#endif
++		rx_fifo_size = params->dev_rx_fifo_size;
++		DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fifo_size);
++
++		DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n",
++			    DWC_READ_REG32(&global_regs->grxfsiz));
++
++		/** Set Periodic Tx FIFO Mask all bits 0 */
++		core_if->p_tx_msk = 0;
++
++		/** Set Tx FIFO Mask all bits 0 */
++		core_if->tx_msk = 0;
++
++		if (core_if->en_multiple_tx_fifo == 0) {
++			/* Non-periodic Tx FIFO */
++			DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
++				    DWC_READ_REG32(&global_regs->gnptxfsiz));
++
++			nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
++			nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
++
++			DWC_WRITE_REG32(&global_regs->gnptxfsiz,
++					nptxfifosize.d32);
++
++			DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
++				    DWC_READ_REG32(&global_regs->gnptxfsiz));
++
++			/**@todo NGS: Fix Periodic FIFO Sizing! */
++			/*
++			 * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15.
++			 * Indexes of the FIFO size module parameters in the
++			 * dev_perio_tx_fifo_size array and the FIFO size registers in
++			 * the dptxfsiz array run from 0 to 14.
++			 */
++			/** @todo Finish debug of this */
++			ptxfifosize.b.startaddr =
++			    nptxfifosize.b.startaddr + nptxfifosize.b.depth;
++			for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++) {
++				ptxfifosize.b.depth =
++				    params->dev_perio_tx_fifo_size[i];
++				DWC_DEBUGPL(DBG_CIL,
++					    "initial dtxfsiz[%d]=%08x\n", i,
++					    DWC_READ_REG32(&global_regs->dtxfsiz
++							   [i]));
++				DWC_WRITE_REG32(&global_regs->dtxfsiz[i],
++						ptxfifosize.d32);
++				DWC_DEBUGPL(DBG_CIL, "new dtxfsiz[%d]=%08x\n",
++					    i,
++					    DWC_READ_REG32(&global_regs->dtxfsiz
++							   [i]));
++				ptxfifosize.b.startaddr += ptxfifosize.b.depth;
++			}
++		} else {
++			/*
++			 * Tx FIFOs These FIFOs are numbered from 1 to 15.
++			 * Indexes of the FIFO size module parameters in the
++			 * dev_tx_fifo_size array and the FIFO size registers in
++			 * the dtxfsiz array run from 0 to 14.
++			 */
++
++			/* Non-periodic Tx FIFO */
++			DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
++				    DWC_READ_REG32(&global_regs->gnptxfsiz));
++
++#ifdef DWC_UTE_CFI
++			core_if->pwron_gnptxfsiz =
++			    (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16);
++			core_if->init_gnptxfsiz =
++			    params->dev_nperio_tx_fifo_size;
++#endif
++			nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
++			nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
++
++			DWC_WRITE_REG32(&global_regs->gnptxfsiz,
++					nptxfifosize.d32);
++
++			DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
++				    DWC_READ_REG32(&global_regs->gnptxfsiz));
++
++			txfifosize.b.startaddr =
++			    nptxfifosize.b.startaddr + nptxfifosize.b.depth;
++
++			for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++
++				txfifosize.b.depth =
++				    params->dev_tx_fifo_size[i];
++
++				DWC_DEBUGPL(DBG_CIL,
++					    "initial dtxfsiz[%d]=%08x\n",
++					    i,
++					    DWC_READ_REG32(&global_regs->dtxfsiz
++							   [i]));
++
++#ifdef DWC_UTE_CFI
++				core_if->pwron_txfsiz[i] =
++				    (DWC_READ_REG32
++				     (&global_regs->dtxfsiz[i]) >> 16);
++				core_if->init_txfsiz[i] =
++				    params->dev_tx_fifo_size[i];
++#endif
++				DWC_WRITE_REG32(&global_regs->dtxfsiz[i],
++						txfifosize.d32);
++
++				DWC_DEBUGPL(DBG_CIL,
++					    "new dtxfsiz[%d]=%08x\n",
++					    i,
++					    DWC_READ_REG32(&global_regs->dtxfsiz
++							   [i]));
++
++				txfifosize.b.startaddr += txfifosize.b.depth;
++			}
++			if (core_if->snpsid <= OTG_CORE_REV_2_94a) {
++				/* Calculating DFIFOCFG for Device mode to include RxFIFO and NPTXFIFO */
++				gdfifocfg.d32 = DWC_READ_REG32(&global_regs->gdfifocfg);
++				hwcfg3.d32 = DWC_READ_REG32(&global_regs->ghwcfg3);
++				gdfifocfg.b.gdfifocfg = (DWC_READ_REG32(&global_regs->ghwcfg3) >> 16);
++				DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32);
++				rxfsiz = (DWC_READ_REG32(&global_regs->grxfsiz) & 0x0000ffff);
++				nptxfsiz = (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16);
++				gdfifocfg.b.epinfobase = rxfsiz + nptxfsiz;
++				DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32);
++			}
++		}
++
++		/* Flush the FIFOs */
++		dwc_otg_flush_tx_fifo(core_if, 0x10);	/* all Tx FIFOs */
++		dwc_otg_flush_rx_fifo(core_if);
++
++		/* Flush the Learning Queue. */
++		resetctl.b.intknqflsh = 1;
++		DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32);
++
++		if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) {
++			core_if->start_predict = 0;
++			for (i = 0; i<= core_if->dev_if->num_in_eps; ++i) {
++				core_if->nextep_seq[i] = 0xff;	// 0xff - EP not active
++			}
++			core_if->nextep_seq[0] = 0;
++			core_if->first_in_nextep_seq = 0;
++			diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl);
++			diepctl.b.nextep = 0;
++			DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32);
++
++			/* Update IN Endpoint Mismatch Count by active IN NP EP count + 1 */
++			dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg);
++			dcfg.b.epmscnt = 2;
++			DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
++
++			DWC_DEBUGPL(DBG_CILV,"%s first_in_nextep_seq= %2d; nextep_seq[]:\n",
++				__func__, core_if->first_in_nextep_seq);
++			for (i=0; i <= core_if->dev_if->num_in_eps; i++) {
++				DWC_DEBUGPL(DBG_CILV, "%2d ", core_if->nextep_seq[i]);
++			}
++			DWC_DEBUGPL(DBG_CILV,"\n");
++		}
++
++		/* Clear all pending Device Interrupts */
++		/** @todo - if the condition needed to be checked
++		 *  or in any case all pending interrutps should be cleared?
++	     */
++		if (core_if->multiproc_int_enable) {
++			for (i = 0; i < core_if->dev_if->num_in_eps; ++i) {
++				DWC_WRITE_REG32(&dev_if->
++						dev_global_regs->diepeachintmsk[i], 0);
++			}
++		}
++
++		for (i = 0; i < core_if->dev_if->num_out_eps; ++i) {
++			DWC_WRITE_REG32(&dev_if->
++					dev_global_regs->doepeachintmsk[i], 0);
++		}
++
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->deachint, 0xFFFFFFFF);
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->deachintmsk, 0);
++	} else {
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->diepmsk, 0);
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->doepmsk, 0);
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->daint, 0xFFFFFFFF);
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->daintmsk, 0);
++	}
++
++	for (i = 0; i <= dev_if->num_in_eps; i++) {
++		depctl_data_t depctl;
++		depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
++		if (depctl.b.epena) {
++			depctl.d32 = 0;
++			depctl.b.epdis = 1;
++			depctl.b.snak = 1;
++		} else {
++			depctl.d32 = 0;
++		}
++
++		DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32);
++
++		DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->dieptsiz, 0);
++		DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepdma, 0);
++		DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepint, 0xFF);
++	}
++
++	for (i = 0; i <= dev_if->num_out_eps; i++) {
++		depctl_data_t depctl;
++		depctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl);
++		if (depctl.b.epena) {
++			dctl_data_t dctl = {.d32 = 0 };
++			gintmsk_data_t gintsts = {.d32 = 0 };
++			doepint_data_t doepint = {.d32 = 0 };
++			dctl.b.sgoutnak = 1;
++			DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
++			do {
++				dwc_udelay(10);
++				gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++			} while (!gintsts.b.goutnakeff);
++			gintsts.d32 = 0;
++			gintsts.b.goutnakeff = 1;
++			DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++			depctl.d32 = 0;
++			depctl.b.epdis = 1;
++			depctl.b.snak = 1;
++			DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]->doepctl, depctl.d32);
++			do {
++				dwc_udelay(10);
++				doepint.d32 = DWC_READ_REG32(&core_if->dev_if->
++					out_ep_regs[i]->doepint);
++			} while (!doepint.b.epdisabled);
++
++			doepint.b.epdisabled = 1;
++			DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]->doepint, doepint.d32);
++
++			dctl.d32 = 0;
++			dctl.b.cgoutnak = 1;
++			DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
++		} else {
++			depctl.d32 = 0;
++		}
++
++		DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, depctl.d32);
++
++		DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doeptsiz, 0);
++		DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepdma, 0);
++		DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepint, 0xFF);
++	}
++
++	if (core_if->en_multiple_tx_fifo && core_if->dma_enable) {
++		dev_if->non_iso_tx_thr_en = params->thr_ctl & 0x1;
++		dev_if->iso_tx_thr_en = (params->thr_ctl >> 1) & 0x1;
++		dev_if->rx_thr_en = (params->thr_ctl >> 2) & 0x1;
++
++		dev_if->rx_thr_length = params->rx_thr_length;
++		dev_if->tx_thr_length = params->tx_thr_length;
++
++		dev_if->setup_desc_index = 0;
++
++		dthrctl.d32 = 0;
++		dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en;
++		dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en;
++		dthrctl.b.tx_thr_len = dev_if->tx_thr_length;
++		dthrctl.b.rx_thr_en = dev_if->rx_thr_en;
++		dthrctl.b.rx_thr_len = dev_if->rx_thr_length;
++		dthrctl.b.ahb_thr_ratio = params->ahb_thr_ratio;
++
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->dtknqr3_dthrctl,
++				dthrctl.d32);
++
++		DWC_DEBUGPL(DBG_CIL,
++			    "Non ISO Tx Thr - %d\nISO Tx Thr - %d\nRx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n",
++			    dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en,
++			    dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len,
++			    dthrctl.b.rx_thr_len);
++
++	}
++
++	dwc_otg_enable_device_interrupts(core_if);
++
++	{
++		diepmsk_data_t msk = {.d32 = 0 };
++		msk.b.txfifoundrn = 1;
++		if (core_if->multiproc_int_enable) {
++			DWC_MODIFY_REG32(&dev_if->dev_global_regs->
++					 diepeachintmsk[0], msk.d32, msk.d32);
++		} else {
++			DWC_MODIFY_REG32(&dev_if->dev_global_regs->diepmsk,
++					 msk.d32, msk.d32);
++		}
++	}
++
++	if (core_if->multiproc_int_enable) {
++		/* Set NAK on Babble */
++		dctl_data_t dctl = {.d32 = 0 };
++		dctl.b.nakonbble = 1;
++		DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, 0, dctl.d32);
++	}
++
++	if (core_if->snpsid >= OTG_CORE_REV_2_94a) {
++		dctl_data_t dctl = {.d32 = 0 };
++		dctl.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dctl);
++		dctl.b.sftdiscon = 0;
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->dctl, dctl.d32);
++	}
++}
++
++/**
++ * This function enables the Host mode interrupts.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ */
++void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_DEBUGPL(DBG_CIL, "%s(%p)\n", __func__, core_if);
++
++	/* Disable all interrupts. */
++	DWC_WRITE_REG32(&global_regs->gintmsk, 0);
++
++	/* Clear any pending interrupts. */
++	DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF);
++
++	/* Enable the common interrupts */
++	dwc_otg_enable_common_interrupts(core_if);
++
++	/*
++	 * Enable host mode interrupts without disturbing common
++	 * interrupts.
++	 */
++
++	intr_mask.b.disconnect = 1;
++	intr_mask.b.portintr = 1;
++	intr_mask.b.hcintr = 1;
++
++	DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
++}
++
++/**
++ * This function disables the Host Mode interrupts.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ */
++void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__);
++
++	/*
++	 * Disable host mode interrupts without disturbing common
++	 * interrupts.
++	 */
++	intr_mask.b.sofintr = 1;
++	intr_mask.b.portintr = 1;
++	intr_mask.b.hcintr = 1;
++	intr_mask.b.ptxfempty = 1;
++	intr_mask.b.nptxfempty = 1;
++
++	DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, 0);
++}
++
++/**
++ * This function initializes the DWC_otg controller registers for
++ * host mode.
++ *
++ * This function flushes the Tx and Rx FIFOs and it flushes any entries in the
++ * request queues. Host channels are reset to ensure that they are ready for
++ * performing transfers.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ *
++ */
++void dwc_otg_core_host_init(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	dwc_otg_host_if_t *host_if = core_if->host_if;
++	dwc_otg_core_params_t *params = core_if->core_params;
++	hprt0_data_t hprt0 = {.d32 = 0 };
++	fifosize_data_t nptxfifosize;
++	fifosize_data_t ptxfifosize;
++	uint16_t rxfsiz, nptxfsiz, hptxfsiz;
++	gdfifocfg_data_t gdfifocfg = {.d32 = 0 };
++	int i;
++	hcchar_data_t hcchar;
++	hcfg_data_t hcfg;
++	hfir_data_t hfir;
++	dwc_otg_hc_regs_t *hc_regs;
++	int num_channels;
++	gotgctl_data_t gotgctl = {.d32 = 0 };
++
++	DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, core_if);
++
++	/* Restart the Phy Clock */
++	DWC_WRITE_REG32(core_if->pcgcctl, 0);
++
++	/* Initialize Host Configuration Register */
++	init_fslspclksel(core_if);
++	if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) {
++		hcfg.d32 = DWC_READ_REG32(&host_if->host_global_regs->hcfg);
++		hcfg.b.fslssupp = 1;
++		DWC_WRITE_REG32(&host_if->host_global_regs->hcfg, hcfg.d32);
++
++	}
++
++	/* This bit allows dynamic reloading of the HFIR register
++	 * during runtime. This bit needs to be programmed during
++	 * initial configuration and its value must not be changed
++	 * during runtime.*/
++	if (core_if->core_params->reload_ctl == 1) {
++		hfir.d32 = DWC_READ_REG32(&host_if->host_global_regs->hfir);
++		hfir.b.hfirrldctrl = 1;
++		DWC_WRITE_REG32(&host_if->host_global_regs->hfir, hfir.d32);
++	}
++
++	if (core_if->core_params->dma_desc_enable) {
++		uint8_t op_mode = core_if->hwcfg2.b.op_mode;
++		if (!
++		    (core_if->hwcfg4.b.desc_dma
++		     && (core_if->snpsid >= OTG_CORE_REV_2_90a)
++		     && ((op_mode == DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG)
++			 || (op_mode == DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG)
++			 || (op_mode ==
++			     DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG)
++			 || (op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)
++			 || (op_mode ==
++			     DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST)))) {
++
++			DWC_ERROR("Host can't operate in Descriptor DMA mode.\n"
++				  "Either core version is below 2.90a or "
++				  "GHWCFG2, GHWCFG4 registers' values do not allow Descriptor DMA in host mode.\n"
++				  "To run the driver in Buffer DMA host mode set dma_desc_enable "
++				  "module parameter to 0.\n");
++			return;
++		}
++		hcfg.d32 = DWC_READ_REG32(&host_if->host_global_regs->hcfg);
++		hcfg.b.descdma = 1;
++		DWC_WRITE_REG32(&host_if->host_global_regs->hcfg, hcfg.d32);
++	}
++
++	/* Configure data FIFO sizes */
++	if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
++		DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n",
++			    core_if->total_fifo_size);
++		DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n",
++			    params->host_rx_fifo_size);
++		DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n",
++			    params->host_nperio_tx_fifo_size);
++		DWC_DEBUGPL(DBG_CIL, "P Tx FIFO Size=%d\n",
++			    params->host_perio_tx_fifo_size);
++
++		/* Rx FIFO */
++		DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n",
++			    DWC_READ_REG32(&global_regs->grxfsiz));
++		DWC_WRITE_REG32(&global_regs->grxfsiz,
++				params->host_rx_fifo_size);
++		DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n",
++			    DWC_READ_REG32(&global_regs->grxfsiz));
++
++		/* Non-periodic Tx FIFO */
++		DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
++			    DWC_READ_REG32(&global_regs->gnptxfsiz));
++		nptxfifosize.b.depth = params->host_nperio_tx_fifo_size;
++		nptxfifosize.b.startaddr = params->host_rx_fifo_size;
++		DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfifosize.d32);
++		DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
++			    DWC_READ_REG32(&global_regs->gnptxfsiz));
++
++		/* Periodic Tx FIFO */
++		DWC_DEBUGPL(DBG_CIL, "initial hptxfsiz=%08x\n",
++			    DWC_READ_REG32(&global_regs->hptxfsiz));
++		ptxfifosize.b.depth = params->host_perio_tx_fifo_size;
++		ptxfifosize.b.startaddr =
++		    nptxfifosize.b.startaddr + nptxfifosize.b.depth;
++		DWC_WRITE_REG32(&global_regs->hptxfsiz, ptxfifosize.d32);
++		DWC_DEBUGPL(DBG_CIL, "new hptxfsiz=%08x\n",
++			    DWC_READ_REG32(&global_regs->hptxfsiz));
++
++		if (core_if->en_multiple_tx_fifo
++		    && core_if->snpsid <= OTG_CORE_REV_2_94a) {
++			/* Global DFIFOCFG calculation for Host mode - include RxFIFO, NPTXFIFO and HPTXFIFO */
++			gdfifocfg.d32 = DWC_READ_REG32(&global_regs->gdfifocfg);
++			rxfsiz = (DWC_READ_REG32(&global_regs->grxfsiz) & 0x0000ffff);
++			nptxfsiz = (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16);
++			hptxfsiz = (DWC_READ_REG32(&global_regs->hptxfsiz) >> 16);
++			gdfifocfg.b.epinfobase = rxfsiz + nptxfsiz + hptxfsiz;
++			DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32);
++		}
++	}
++
++	/* TODO - check this */
++	/* Clear Host Set HNP Enable in the OTG Control Register */
++	gotgctl.b.hstsethnpen = 1;
++	DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0);
++	/* Make sure the FIFOs are flushed. */
++	dwc_otg_flush_tx_fifo(core_if, 0x10 /* all TX FIFOs */ );
++	dwc_otg_flush_rx_fifo(core_if);
++
++	/* Clear Host Set HNP Enable in the OTG Control Register */
++	gotgctl.b.hstsethnpen = 1;
++	DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0);
++
++	if (!core_if->core_params->dma_desc_enable) {
++		/* Flush out any leftover queued requests. */
++		num_channels = core_if->core_params->host_channels;
++
++		for (i = 0; i < num_channels; i++) {
++			hc_regs = core_if->host_if->hc_regs[i];
++			hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++			hcchar.b.chen = 0;
++			hcchar.b.chdis = 1;
++			hcchar.b.epdir = 0;
++			DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++		}
++
++		/* Halt all channels to put them into a known state. */
++		for (i = 0; i < num_channels; i++) {
++			int count = 0;
++			hc_regs = core_if->host_if->hc_regs[i];
++			hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++			hcchar.b.chen = 1;
++			hcchar.b.chdis = 1;
++			hcchar.b.epdir = 0;
++			DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++			DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d regs %p\n", __func__, i, hc_regs);
++			do {
++				hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++				if (++count > 1000) {
++					DWC_ERROR
++					    ("%s: Unable to clear halt on channel %d (timeout HCCHAR 0x%X @%p)\n",
++					     __func__, i, hcchar.d32, &hc_regs->hcchar);
++					break;
++				}
++				dwc_udelay(1);
++			} while (hcchar.b.chen);
++		}
++	}
++
++	/* Turn on the vbus power. */
++	DWC_PRINTF("Init: Port Power? op_state=%d\n", core_if->op_state);
++	if (core_if->op_state == A_HOST) {
++		hprt0.d32 = dwc_otg_read_hprt0(core_if);
++		DWC_PRINTF("Init: Power Port (%d)\n", hprt0.b.prtpwr);
++		if (hprt0.b.prtpwr == 0) {
++			hprt0.b.prtpwr = 1;
++			DWC_WRITE_REG32(host_if->hprt0, hprt0.d32);
++		}
++	}
++
++	dwc_otg_enable_host_interrupts(core_if);
++}
++
++/**
++ * Prepares a host channel for transferring packets to/from a specific
++ * endpoint. The HCCHARn register is set up with the characteristics specified
++ * in _hc. Host channel interrupts that may need to be serviced while this
++ * transfer is in progress are enabled.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ * @param hc Information needed to initialize the host channel
++ */
++void dwc_otg_hc_init(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
++{
++	uint32_t intr_enable;
++	hcintmsk_data_t hc_intr_mask;
++	gintmsk_data_t gintmsk = {.d32 = 0 };
++	hcchar_data_t hcchar;
++	hcsplt_data_t hcsplt;
++
++	uint8_t hc_num = hc->hc_num;
++	dwc_otg_host_if_t *host_if = core_if->host_if;
++	dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num];
++
++	/* Clear old interrupt conditions for this host channel. */
++	hc_intr_mask.d32 = 0xFFFFFFFF;
++	hc_intr_mask.b.reserved14_31 = 0;
++	DWC_WRITE_REG32(&hc_regs->hcint, hc_intr_mask.d32);
++
++	/* Enable channel interrupts required for this transfer. */
++	hc_intr_mask.d32 = 0;
++	hc_intr_mask.b.chhltd = 1;
++	if (core_if->dma_enable) {
++		/* For Descriptor DMA mode core halts the channel on AHB error. Interrupt is not required */
++		if (!core_if->dma_desc_enable)
++			hc_intr_mask.b.ahberr = 1;
++		else {
++			if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC)
++				hc_intr_mask.b.xfercompl = 1;
++		}
++
++		if (hc->error_state && !hc->do_split &&
++		    hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
++			hc_intr_mask.b.ack = 1;
++			if (hc->ep_is_in) {
++				hc_intr_mask.b.datatglerr = 1;
++				if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) {
++					hc_intr_mask.b.nak = 1;
++				}
++			}
++		}
++	} else {
++		switch (hc->ep_type) {
++		case DWC_OTG_EP_TYPE_CONTROL:
++		case DWC_OTG_EP_TYPE_BULK:
++			hc_intr_mask.b.xfercompl = 1;
++			hc_intr_mask.b.stall = 1;
++			hc_intr_mask.b.xacterr = 1;
++			hc_intr_mask.b.datatglerr = 1;
++			if (hc->ep_is_in) {
++				hc_intr_mask.b.bblerr = 1;
++			} else {
++				hc_intr_mask.b.nak = 1;
++				hc_intr_mask.b.nyet = 1;
++				if (hc->do_ping) {
++					hc_intr_mask.b.ack = 1;
++				}
++			}
++
++			if (hc->do_split) {
++				hc_intr_mask.b.nak = 1;
++				if (hc->complete_split) {
++					hc_intr_mask.b.nyet = 1;
++				} else {
++					hc_intr_mask.b.ack = 1;
++				}
++			}
++
++			if (hc->error_state) {
++				hc_intr_mask.b.ack = 1;
++			}
++			break;
++		case DWC_OTG_EP_TYPE_INTR:
++			hc_intr_mask.b.xfercompl = 1;
++			hc_intr_mask.b.nak = 1;
++			hc_intr_mask.b.stall = 1;
++			hc_intr_mask.b.xacterr = 1;
++			hc_intr_mask.b.datatglerr = 1;
++			hc_intr_mask.b.frmovrun = 1;
++
++			if (hc->ep_is_in) {
++				hc_intr_mask.b.bblerr = 1;
++			}
++			if (hc->error_state) {
++				hc_intr_mask.b.ack = 1;
++			}
++			if (hc->do_split) {
++				if (hc->complete_split) {
++					hc_intr_mask.b.nyet = 1;
++				} else {
++					hc_intr_mask.b.ack = 1;
++				}
++			}
++			break;
++		case DWC_OTG_EP_TYPE_ISOC:
++			hc_intr_mask.b.xfercompl = 1;
++			hc_intr_mask.b.frmovrun = 1;
++			hc_intr_mask.b.ack = 1;
++
++			if (hc->ep_is_in) {
++				hc_intr_mask.b.xacterr = 1;
++				hc_intr_mask.b.bblerr = 1;
++			}
++			break;
++		}
++	}
++	DWC_WRITE_REG32(&hc_regs->hcintmsk, hc_intr_mask.d32);
++
++	/* Enable the top level host channel interrupt. */
++	intr_enable = (1 << hc_num);
++	DWC_MODIFY_REG32(&host_if->host_global_regs->haintmsk, 0, intr_enable);
++
++	/* Make sure host channel interrupts are enabled. */
++	gintmsk.b.hcintr = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, gintmsk.d32);
++
++	/*
++	 * Program the HCCHARn register with the endpoint characteristics for
++	 * the current transfer.
++	 */
++	hcchar.d32 = 0;
++	hcchar.b.devaddr = hc->dev_addr;
++	hcchar.b.epnum = hc->ep_num;
++	hcchar.b.epdir = hc->ep_is_in;
++	hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW);
++	hcchar.b.eptype = hc->ep_type;
++	hcchar.b.mps = hc->max_packet;
++
++	DWC_WRITE_REG32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32);
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d, Dev Addr %d, EP #%d\n",
++                    __func__, hc->hc_num, hcchar.b.devaddr, hcchar.b.epnum);
++	DWC_DEBUGPL(DBG_HCDV, "	 Is In %d, Is Low Speed %d, EP Type %d, "
++                                "Max Pkt %d, Multi Cnt %d\n",
++                    hcchar.b.epdir, hcchar.b.lspddev, hcchar.b.eptype,
++                    hcchar.b.mps, hcchar.b.multicnt);
++
++	/*
++	 * Program the HCSPLIT register for SPLITs
++	 */
++	hcsplt.d32 = 0;
++	if (hc->do_split) {
++		DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n",
++			    hc->hc_num,
++			    hc->complete_split ? "CSPLIT" : "SSPLIT");
++		hcsplt.b.compsplt = hc->complete_split;
++		hcsplt.b.xactpos = hc->xact_pos;
++		hcsplt.b.hubaddr = hc->hub_addr;
++		hcsplt.b.prtaddr = hc->port_addr;
++		DWC_DEBUGPL(DBG_HCDV, "\t  comp split %d\n", hc->complete_split);
++		DWC_DEBUGPL(DBG_HCDV, "\t  xact pos %d\n", hc->xact_pos);
++		DWC_DEBUGPL(DBG_HCDV, "\t  hub addr %d\n", hc->hub_addr);
++		DWC_DEBUGPL(DBG_HCDV, "\t  port addr %d\n", hc->port_addr);
++		DWC_DEBUGPL(DBG_HCDV, "\t  is_in %d\n", hc->ep_is_in);
++		DWC_DEBUGPL(DBG_HCDV, "\t  Max Pkt: %d\n", hcchar.b.mps);
++		DWC_DEBUGPL(DBG_HCDV, "\t  xferlen: %d\n", hc->xfer_len);
++	}
++	DWC_WRITE_REG32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32);
++
++}
++
++/**
++ * Attempts to halt a host channel. This function should only be called in
++ * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under
++ * normal circumstances in DMA mode, the controller halts the channel when the
++ * transfer is complete or a condition occurs that requires application
++ * intervention.
++ *
++ * In slave mode, checks for a free request queue entry, then sets the Channel
++ * Enable and Channel Disable bits of the Host Channel Characteristics
++ * register of the specified channel to intiate the halt. If there is no free
++ * request queue entry, sets only the Channel Disable bit of the HCCHARn
++ * register to flush requests for this channel. In the latter case, sets a
++ * flag to indicate that the host channel needs to be halted when a request
++ * queue slot is open.
++ *
++ * In DMA mode, always sets the Channel Enable and Channel Disable bits of the
++ * HCCHARn register. The controller ensures there is space in the request
++ * queue before submitting the halt request.
++ *
++ * Some time may elapse before the core flushes any posted requests for this
++ * host channel and halts. The Channel Halted interrupt handler completes the
++ * deactivation of the host channel.
++ *
++ * @param core_if Controller register interface.
++ * @param hc Host channel to halt.
++ * @param halt_status Reason for halting the channel.
++ */
++void dwc_otg_hc_halt(dwc_otg_core_if_t * core_if,
++		     dwc_hc_t * hc, dwc_otg_halt_status_e halt_status)
++{
++	gnptxsts_data_t nptxsts;
++	hptxsts_data_t hptxsts;
++	hcchar_data_t hcchar;
++	dwc_otg_hc_regs_t *hc_regs;
++	dwc_otg_core_global_regs_t *global_regs;
++	dwc_otg_host_global_regs_t *host_global_regs;
++
++	hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++	global_regs = core_if->core_global_regs;
++	host_global_regs = core_if->host_if->host_global_regs;
++
++	DWC_ASSERT(!(halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS),
++		   "halt_status = %d\n", halt_status);
++
++	if (halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
++	    halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
++		/*
++		 * Disable all channel interrupts except Ch Halted. The QTD
++		 * and QH state associated with this transfer has been cleared
++		 * (in the case of URB_DEQUEUE), so the channel needs to be
++		 * shut down carefully to prevent crashes.
++		 */
++		hcintmsk_data_t hcintmsk;
++		hcintmsk.d32 = 0;
++		hcintmsk.b.chhltd = 1;
++		DWC_WRITE_REG32(&hc_regs->hcintmsk, hcintmsk.d32);
++
++		/*
++		 * Make sure no other interrupts besides halt are currently
++		 * pending. Handling another interrupt could cause a crash due
++		 * to the QTD and QH state.
++		 */
++		DWC_WRITE_REG32(&hc_regs->hcint, ~hcintmsk.d32);
++
++		/*
++		 * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
++		 * even if the channel was already halted for some other
++		 * reason.
++		 */
++		hc->halt_status = halt_status;
++
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++		if (hcchar.b.chen == 0) {
++			/*
++			 * The channel is either already halted or it hasn't
++			 * started yet. In DMA mode, the transfer may halt if
++			 * it finishes normally or a condition occurs that
++			 * requires driver intervention. Don't want to halt
++			 * the channel again. In either Slave or DMA mode,
++			 * it's possible that the transfer has been assigned
++			 * to a channel, but not started yet when an URB is
++			 * dequeued. Don't want to halt a channel that hasn't
++			 * started yet.
++			 */
++			return;
++		}
++	}
++	if (hc->halt_pending) {
++		/*
++		 * A halt has already been issued for this channel. This might
++		 * happen when a transfer is aborted by a higher level in
++		 * the stack.
++		 */
++#ifdef DEBUG
++		DWC_PRINTF
++		    ("*** %s: Channel %d, _hc->halt_pending already set ***\n",
++		     __func__, hc->hc_num);
++
++#endif
++		return;
++	}
++
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++	/* No need to set the bit in DDMA for disabling the channel */
++	//TODO check it everywhere channel is disabled
++	if (!core_if->core_params->dma_desc_enable)
++		hcchar.b.chen = 1;
++	hcchar.b.chdis = 1;
++
++	if (!core_if->dma_enable) {
++		/* Check for space in the request queue to issue the halt. */
++		if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
++		    hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
++			nptxsts.d32 = DWC_READ_REG32(&global_regs->gnptxsts);
++			if (nptxsts.b.nptxqspcavail == 0) {
++				hcchar.b.chen = 0;
++			}
++		} else {
++			hptxsts.d32 =
++			    DWC_READ_REG32(&host_global_regs->hptxsts);
++			if ((hptxsts.b.ptxqspcavail == 0)
++			    || (core_if->queuing_high_bandwidth)) {
++				hcchar.b.chen = 0;
++			}
++		}
++	}
++	DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++
++	hc->halt_status = halt_status;
++
++	if (hcchar.b.chen) {
++		hc->halt_pending = 1;
++		hc->halt_on_queue = 0;
++	} else {
++		hc->halt_on_queue = 1;
++	}
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++	DWC_DEBUGPL(DBG_HCDV, "	 hcchar: 0x%08x\n", hcchar.d32);
++	DWC_DEBUGPL(DBG_HCDV, "	 halt_pending: %d\n", hc->halt_pending);
++	DWC_DEBUGPL(DBG_HCDV, "	 halt_on_queue: %d\n", hc->halt_on_queue);
++	DWC_DEBUGPL(DBG_HCDV, "	 halt_status: %d\n", hc->halt_status);
++
++	return;
++}
++
++/**
++ * Clears the transfer state for a host channel. This function is normally
++ * called after a transfer is done and the host channel is being released.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param hc Identifies the host channel to clean up.
++ */
++void dwc_otg_hc_cleanup(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
++{
++	dwc_otg_hc_regs_t *hc_regs;
++
++	hc->xfer_started = 0;
++
++	/*
++	 * Clear channel interrupt enables and any unhandled channel interrupt
++	 * conditions.
++	 */
++	hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++	DWC_WRITE_REG32(&hc_regs->hcintmsk, 0);
++	DWC_WRITE_REG32(&hc_regs->hcint, 0xFFFFFFFF);
++#ifdef DEBUG
++	DWC_TIMER_CANCEL(core_if->hc_xfer_timer[hc->hc_num]);
++#endif
++}
++
++/**
++ * Sets the channel property that indicates in which frame a periodic transfer
++ * should occur. This is always set to the _next_ frame. This function has no
++ * effect on non-periodic transfers.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param hc Identifies the host channel to set up and its properties.
++ * @param hcchar Current value of the HCCHAR register for the specified host
++ * channel.
++ */
++static inline void hc_set_even_odd_frame(dwc_otg_core_if_t * core_if,
++					 dwc_hc_t * hc, hcchar_data_t * hcchar)
++{
++	if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++	    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++		hfnum_data_t hfnum;
++		hfnum.d32 =
++		    DWC_READ_REG32(&core_if->host_if->host_global_regs->hfnum);
++
++		/* 1 if _next_ frame is odd, 0 if it's even */
++		hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1;
++#ifdef DEBUG
++		if (hc->ep_type == DWC_OTG_EP_TYPE_INTR && hc->do_split
++		    && !hc->complete_split) {
++			switch (hfnum.b.frnum & 0x7) {
++			case 7:
++				core_if->hfnum_7_samples++;
++				core_if->hfnum_7_frrem_accum += hfnum.b.frrem;
++				break;
++			case 0:
++				core_if->hfnum_0_samples++;
++				core_if->hfnum_0_frrem_accum += hfnum.b.frrem;
++				break;
++			default:
++				core_if->hfnum_other_samples++;
++				core_if->hfnum_other_frrem_accum +=
++				    hfnum.b.frrem;
++				break;
++			}
++		}
++#endif
++	}
++}
++
++#ifdef DEBUG
++void hc_xfer_timeout(void *ptr)
++{
++	hc_xfer_info_t *xfer_info = NULL;
++	int hc_num = 0;
++
++	if (ptr)
++		xfer_info = (hc_xfer_info_t *) ptr;
++
++	if (!xfer_info->hc) {
++		DWC_ERROR("xfer_info->hc = %p\n", xfer_info->hc);
++		return;
++	}
++
++	hc_num = xfer_info->hc->hc_num;
++	DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num);
++	DWC_WARN("	start_hcchar_val 0x%08x\n",
++		 xfer_info->core_if->start_hcchar_val[hc_num]);
++}
++#endif
++
++void ep_xfer_timeout(void *ptr)
++{
++	ep_xfer_info_t *xfer_info = NULL;
++	int ep_num = 0;
++	dctl_data_t dctl = {.d32 = 0 };
++	gintsts_data_t gintsts = {.d32 = 0 };
++	gintmsk_data_t gintmsk = {.d32 = 0 };
++
++	if (ptr)
++		xfer_info = (ep_xfer_info_t *) ptr;
++
++	if (!xfer_info->ep) {
++		DWC_ERROR("xfer_info->ep = %p\n", xfer_info->ep);
++		return;
++	}
++
++	ep_num = xfer_info->ep->num;
++	DWC_WARN("%s: timeout on endpoit %d\n", __func__, ep_num);
++	/* Put the sate to 2 as it was time outed */
++	xfer_info->state = 2;
++
++	dctl.d32 =
++	    DWC_READ_REG32(&xfer_info->core_if->dev_if->dev_global_regs->dctl);
++	gintsts.d32 =
++	    DWC_READ_REG32(&xfer_info->core_if->core_global_regs->gintsts);
++	gintmsk.d32 =
++	    DWC_READ_REG32(&xfer_info->core_if->core_global_regs->gintmsk);
++
++	if (!gintmsk.b.goutnakeff) {
++		/* Unmask it */
++		gintmsk.b.goutnakeff = 1;
++		DWC_WRITE_REG32(&xfer_info->core_if->core_global_regs->gintmsk,
++				gintmsk.d32);
++
++	}
++
++	if (!gintsts.b.goutnakeff) {
++		dctl.b.sgoutnak = 1;
++	}
++	DWC_WRITE_REG32(&xfer_info->core_if->dev_if->dev_global_regs->dctl,
++			dctl.d32);
++
++}
++
++void set_pid_isoc(dwc_hc_t * hc)
++{
++	/* Set up the initial PID for the transfer. */
++	if (hc->speed == DWC_OTG_EP_SPEED_HIGH) {
++		if (hc->ep_is_in) {
++			if (hc->multi_count == 1) {
++				hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
++			} else if (hc->multi_count == 2) {
++				hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
++			} else {
++				hc->data_pid_start = DWC_OTG_HC_PID_DATA2;
++			}
++		} else {
++			if (hc->multi_count == 1) {
++				hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
++			} else {
++				hc->data_pid_start = DWC_OTG_HC_PID_MDATA;
++			}
++		}
++	} else {
++		hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
++	}
++}
++
++/**
++ * This function does the setup for a data transfer for a host channel and
++ * starts the transfer. May be called in either Slave mode or DMA mode. In
++ * Slave mode, the caller must ensure that there is sufficient space in the
++ * request queue and Tx Data FIFO.
++ *
++ * For an OUT transfer in Slave mode, it loads a data packet into the
++ * appropriate FIFO. If necessary, additional data packets will be loaded in
++ * the Host ISR.
++ *
++ * For an IN transfer in Slave mode, a data packet is requested. The data
++ * packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
++ * additional data packets are requested in the Host ISR.
++ *
++ * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
++ * register along with a packet count of 1 and the channel is enabled. This
++ * causes a single PING transaction to occur. Other fields in HCTSIZ are
++ * simply set to 0 since no data transfer occurs in this case.
++ *
++ * For a PING transfer in DMA mode, the HCTSIZ register is initialized with
++ * all the information required to perform the subsequent data transfer. In
++ * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
++ * controller performs the entire PING protocol, then starts the data
++ * transfer.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param hc Information needed to initialize the host channel. The xfer_len
++ * value may be reduced to accommodate the max widths of the XferSize and
++ * PktCnt fields in the HCTSIZn register. The multi_count value may be changed
++ * to reflect the final xfer_len value.
++ */
++void dwc_otg_hc_start_transfer(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
++{
++	hcchar_data_t hcchar;
++	hctsiz_data_t hctsiz;
++	uint16_t num_packets;
++	uint32_t max_hc_xfer_size = core_if->core_params->max_transfer_size;
++	uint16_t max_hc_pkt_count = core_if->core_params->max_packet_count;
++	dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++
++	hctsiz.d32 = 0;
++
++	if (hc->do_ping) {
++		if (!core_if->dma_enable) {
++			dwc_otg_hc_do_ping(core_if, hc);
++			hc->xfer_started = 1;
++			return;
++		} else {
++			hctsiz.b.dopng = 1;
++		}
++	}
++
++	if (hc->do_split) {
++		num_packets = 1;
++
++		if (hc->complete_split && !hc->ep_is_in) {
++			/* For CSPLIT OUT Transfer, set the size to 0 so the
++			 * core doesn't expect any data written to the FIFO */
++			hc->xfer_len = 0;
++		} else if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) {
++			hc->xfer_len = hc->max_packet;
++		} else if (!hc->ep_is_in && (hc->xfer_len > 188)) {
++			hc->xfer_len = 188;
++		}
++
++		hctsiz.b.xfersize = hc->xfer_len;
++	} else {
++		/*
++		 * Ensure that the transfer length and packet count will fit
++		 * in the widths allocated for them in the HCTSIZn register.
++		 */
++		if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++		    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++			/*
++			 * Make sure the transfer size is no larger than one
++			 * (micro)frame's worth of data. (A check was done
++			 * when the periodic transfer was accepted to ensure
++			 * that a (micro)frame's worth of data can be
++			 * programmed into a channel.)
++			 */
++			uint32_t max_periodic_len =
++			    hc->multi_count * hc->max_packet;
++			if (hc->xfer_len > max_periodic_len) {
++				hc->xfer_len = max_periodic_len;
++			} else {
++			}
++		} else if (hc->xfer_len > max_hc_xfer_size) {
++			/* Make sure that xfer_len is a multiple of max packet size. */
++			hc->xfer_len = max_hc_xfer_size - hc->max_packet + 1;
++		}
++
++		if (hc->xfer_len > 0) {
++			num_packets =
++			    (hc->xfer_len + hc->max_packet -
++			     1) / hc->max_packet;
++			if (num_packets > max_hc_pkt_count) {
++				num_packets = max_hc_pkt_count;
++				hc->xfer_len = num_packets * hc->max_packet;
++			}
++		} else {
++			/* Need 1 packet for transfer length of 0. */
++			num_packets = 1;
++		}
++
++		if (hc->ep_is_in) {
++			/* Always program an integral # of max packets for IN transfers. */
++			hc->xfer_len = num_packets * hc->max_packet;
++		}
++
++		if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++		    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++			/*
++			 * Make sure that the multi_count field matches the
++			 * actual transfer length.
++			 */
++			hc->multi_count = num_packets;
++		}
++
++		if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC)
++			set_pid_isoc(hc);
++
++		hctsiz.b.xfersize = hc->xfer_len;
++	}
++
++	hc->start_pkt_count = num_packets;
++	hctsiz.b.pktcnt = num_packets;
++	hctsiz.b.pid = hc->data_pid_start;
++	DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32);
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++	DWC_DEBUGPL(DBG_HCDV, "	 Xfer Size: %d\n", hctsiz.b.xfersize);
++	DWC_DEBUGPL(DBG_HCDV, "	 Num Pkts: %d\n", hctsiz.b.pktcnt);
++	DWC_DEBUGPL(DBG_HCDV, "	 Start PID: %d\n", hctsiz.b.pid);
++
++	if (core_if->dma_enable) {
++		dwc_dma_t dma_addr;
++		if (hc->align_buff) {
++			dma_addr = hc->align_buff;
++		} else {
++			dma_addr = ((unsigned long)hc->xfer_buff & 0xffffffff);
++		}
++		DWC_WRITE_REG32(&hc_regs->hcdma, dma_addr);
++	}
++
++	/* Start the split */
++	if (hc->do_split) {
++		hcsplt_data_t hcsplt;
++		hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt);
++		hcsplt.b.spltena = 1;
++		DWC_WRITE_REG32(&hc_regs->hcsplt, hcsplt.d32);
++	}
++
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	hcchar.b.multicnt = hc->multi_count;
++	hc_set_even_odd_frame(core_if, hc, &hcchar);
++#ifdef DEBUG
++	core_if->start_hcchar_val[hc->hc_num] = hcchar.d32;
++	if (hcchar.b.chdis) {
++		DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
++			 __func__, hc->hc_num, hcchar.d32);
++	}
++#endif
++
++	/* Set host channel enable after all other setup is complete. */
++	hcchar.b.chen = 1;
++	hcchar.b.chdis = 0;
++	DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++
++	hc->xfer_started = 1;
++	hc->requests++;
++
++	if (!core_if->dma_enable && !hc->ep_is_in && hc->xfer_len > 0) {
++		/* Load OUT packet into the appropriate Tx FIFO. */
++		dwc_otg_hc_write_packet(core_if, hc);
++	}
++#ifdef DEBUG
++	if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) {
++                DWC_DEBUGPL(DBG_HCDV, "transfer %d from core_if %p\n",
++                            hc->hc_num, core_if);//GRAYG
++		core_if->hc_xfer_info[hc->hc_num].core_if = core_if;
++		core_if->hc_xfer_info[hc->hc_num].hc = hc;
++
++		/* Start a timer for this transfer. */
++		DWC_TIMER_SCHEDULE(core_if->hc_xfer_timer[hc->hc_num], 10000);
++	}
++#endif
++}
++
++/**
++ * This function does the setup for a data transfer for a host channel
++ * and starts the transfer in Descriptor DMA mode.
++ *
++ * Initializes HCTSIZ register. For a PING transfer the Do Ping bit is set.
++ * Sets PID and NTD values. For periodic transfers
++ * initializes SCHED_INFO field with micro-frame bitmap.
++ *
++ * Initializes HCDMA register with descriptor list address and CTD value
++ * then starts the transfer via enabling the channel.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param hc Information needed to initialize the host channel.
++ */
++void dwc_otg_hc_start_transfer_ddma(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
++{
++	dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++	hcchar_data_t hcchar;
++	hctsiz_data_t hctsiz;
++	hcdma_data_t hcdma;
++
++	hctsiz.d32 = 0;
++
++	if (hc->do_ping)
++		hctsiz.b_ddma.dopng = 1;
++
++	if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC)
++		set_pid_isoc(hc);
++
++	/* Packet Count and Xfer Size are not used in Descriptor DMA mode */
++	hctsiz.b_ddma.pid = hc->data_pid_start;
++	hctsiz.b_ddma.ntd = hc->ntd - 1;	/* 0 - 1 descriptor, 1 - 2 descriptors, etc. */
++	hctsiz.b_ddma.schinfo = hc->schinfo;	/* Non-zero only for high-speed interrupt endpoints */
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++	DWC_DEBUGPL(DBG_HCDV, "	 Start PID: %d\n", hctsiz.b.pid);
++	DWC_DEBUGPL(DBG_HCDV, "	 NTD: %d\n", hctsiz.b_ddma.ntd);
++
++	DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32);
++
++	hcdma.d32 = 0;
++	hcdma.b.dma_addr = ((uint32_t) hc->desc_list_addr) >> 11;
++
++	/* Always start from first descriptor. */
++	hcdma.b.ctd = 0;
++	DWC_WRITE_REG32(&hc_regs->hcdma, hcdma.d32);
++
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	hcchar.b.multicnt = hc->multi_count;
++
++#ifdef DEBUG
++	core_if->start_hcchar_val[hc->hc_num] = hcchar.d32;
++	if (hcchar.b.chdis) {
++		DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
++			 __func__, hc->hc_num, hcchar.d32);
++	}
++#endif
++
++	/* Set host channel enable after all other setup is complete. */
++	hcchar.b.chen = 1;
++	hcchar.b.chdis = 0;
++
++	DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++
++	hc->xfer_started = 1;
++	hc->requests++;
++
++#ifdef DEBUG
++	if ((hc->ep_type != DWC_OTG_EP_TYPE_INTR)
++	    && (hc->ep_type != DWC_OTG_EP_TYPE_ISOC)) {
++                DWC_DEBUGPL(DBG_HCDV, "DMA transfer %d from core_if %p\n",
++                            hc->hc_num, core_if);//GRAYG
++		core_if->hc_xfer_info[hc->hc_num].core_if = core_if;
++		core_if->hc_xfer_info[hc->hc_num].hc = hc;
++		/* Start a timer for this transfer. */
++		DWC_TIMER_SCHEDULE(core_if->hc_xfer_timer[hc->hc_num], 10000);
++	}
++#endif
++
++}
++
++/**
++ * This function continues a data transfer that was started by previous call
++ * to <code>dwc_otg_hc_start_transfer</code>. The caller must ensure there is
++ * sufficient space in the request queue and Tx Data FIFO. This function
++ * should only be called in Slave mode. In DMA mode, the controller acts
++ * autonomously to complete transfers programmed to a host channel.
++ *
++ * For an OUT transfer, a new data packet is loaded into the appropriate FIFO
++ * if there is any data remaining to be queued. For an IN transfer, another
++ * data packet is always requested. For the SETUP phase of a control transfer,
++ * this function does nothing.
++ *
++ * @return 1 if a new request is queued, 0 if no more requests are required
++ * for this transfer.
++ */
++int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
++{
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++
++	if (hc->do_split) {
++		/* SPLITs always queue just once per channel */
++		return 0;
++	} else if (hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
++		/* SETUPs are queued only once since they can't be NAKed. */
++		return 0;
++	} else if (hc->ep_is_in) {
++		/*
++		 * Always queue another request for other IN transfers. If
++		 * back-to-back INs are issued and NAKs are received for both,
++		 * the driver may still be processing the first NAK when the
++		 * second NAK is received. When the interrupt handler clears
++		 * the NAK interrupt for the first NAK, the second NAK will
++		 * not be seen. So we can't depend on the NAK interrupt
++		 * handler to requeue a NAKed request. Instead, IN requests
++		 * are issued each time this function is called. When the
++		 * transfer completes, the extra requests for the channel will
++		 * be flushed.
++		 */
++		hcchar_data_t hcchar;
++		dwc_otg_hc_regs_t *hc_regs =
++		    core_if->host_if->hc_regs[hc->hc_num];
++
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++		hc_set_even_odd_frame(core_if, hc, &hcchar);
++		hcchar.b.chen = 1;
++		hcchar.b.chdis = 0;
++		DWC_DEBUGPL(DBG_HCDV, "	 IN xfer: hcchar = 0x%08x\n",
++			    hcchar.d32);
++		DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++		hc->requests++;
++		return 1;
++	} else {
++		/* OUT transfers. */
++		if (hc->xfer_count < hc->xfer_len) {
++			if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++			    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++				hcchar_data_t hcchar;
++				dwc_otg_hc_regs_t *hc_regs;
++				hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++				hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++				hc_set_even_odd_frame(core_if, hc, &hcchar);
++			}
++
++			/* Load OUT packet into the appropriate Tx FIFO. */
++			dwc_otg_hc_write_packet(core_if, hc);
++			hc->requests++;
++			return 1;
++		} else {
++			return 0;
++		}
++	}
++}
++
++/**
++ * Starts a PING transfer. This function should only be called in Slave mode.
++ * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled.
++ */
++void dwc_otg_hc_do_ping(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
++{
++	hcchar_data_t hcchar;
++	hctsiz_data_t hctsiz;
++	dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++
++	hctsiz.d32 = 0;
++	hctsiz.b.dopng = 1;
++	hctsiz.b.pktcnt = 1;
++	DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32);
++
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	hcchar.b.chen = 1;
++	hcchar.b.chdis = 0;
++	DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++}
++
++/*
++ * This function writes a packet into the Tx FIFO associated with the Host
++ * Channel. For a channel associated with a non-periodic EP, the non-periodic
++ * Tx FIFO is written. For a channel associated with a periodic EP, the
++ * periodic Tx FIFO is written. This function should only be called in Slave
++ * mode.
++ *
++ * Upon return the xfer_buff and xfer_count fields in _hc are incremented by
++ * then number of bytes written to the Tx FIFO.
++ */
++void dwc_otg_hc_write_packet(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
++{
++	uint32_t i;
++	uint32_t remaining_count;
++	uint32_t byte_count;
++	uint32_t dword_count;
++
++	uint32_t *data_buff = (uint32_t *) (hc->xfer_buff);
++	uint32_t *data_fifo = core_if->data_fifo[hc->hc_num];
++
++	remaining_count = hc->xfer_len - hc->xfer_count;
++	if (remaining_count > hc->max_packet) {
++		byte_count = hc->max_packet;
++	} else {
++		byte_count = remaining_count;
++	}
++
++	dword_count = (byte_count + 3) / 4;
++
++	if ((((unsigned long)data_buff) & 0x3) == 0) {
++		/* xfer_buff is DWORD aligned. */
++		for (i = 0; i < dword_count; i++, data_buff++) {
++			DWC_WRITE_REG32(data_fifo, *data_buff);
++		}
++	} else {
++		/* xfer_buff is not DWORD aligned. */
++		for (i = 0; i < dword_count; i++, data_buff++) {
++			uint32_t data;
++			data =
++			    (data_buff[0] | data_buff[1] << 8 | data_buff[2] <<
++			     16 | data_buff[3] << 24);
++			DWC_WRITE_REG32(data_fifo, data);
++		}
++	}
++
++	hc->xfer_count += byte_count;
++	hc->xfer_buff += byte_count;
++}
++
++/**
++ * Gets the current USB frame number. This is the frame number from the last
++ * SOF packet.
++ */
++uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t * core_if)
++{
++	dsts_data_t dsts;
++	dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
++
++	/* read current frame/microframe number from DSTS register */
++	return dsts.b.soffn;
++}
++
++/**
++ * Calculates and gets the frame Interval value of HFIR register according PHY
++ * type and speed.The application can modify a value of HFIR register only after
++ * the Port Enable bit of the Host Port Control and Status register
++ * (HPRT.PrtEnaPort) has been set.
++*/
++
++uint32_t calc_frame_interval(dwc_otg_core_if_t * core_if)
++{
++	gusbcfg_data_t usbcfg;
++	hwcfg2_data_t hwcfg2;
++	hprt0_data_t hprt0;
++	int clock = 60;		// default value
++	usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++	hwcfg2.d32 = DWC_READ_REG32(&core_if->core_global_regs->ghwcfg2);
++	hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0);
++	if (!usbcfg.b.physel && usbcfg.b.ulpi_utmi_sel && !usbcfg.b.phyif)
++		clock = 60;
++	if (usbcfg.b.physel && hwcfg2.b.fs_phy_type == 3)
++		clock = 48;
++	if (!usbcfg.b.phylpwrclksel && !usbcfg.b.physel &&
++	    !usbcfg.b.ulpi_utmi_sel && usbcfg.b.phyif)
++		clock = 30;
++	if (!usbcfg.b.phylpwrclksel && !usbcfg.b.physel &&
++	    !usbcfg.b.ulpi_utmi_sel && !usbcfg.b.phyif)
++		clock = 60;
++	if (usbcfg.b.phylpwrclksel && !usbcfg.b.physel &&
++	    !usbcfg.b.ulpi_utmi_sel && usbcfg.b.phyif)
++		clock = 48;
++	if (usbcfg.b.physel && !usbcfg.b.phyif && hwcfg2.b.fs_phy_type == 2)
++		clock = 48;
++	if (usbcfg.b.physel && hwcfg2.b.fs_phy_type == 1)
++		clock = 48;
++	if (hprt0.b.prtspd == 0)
++		/* High speed case */
++		return 125 * clock;
++	else
++		/* FS/LS case */
++		return 1000 * clock;
++}
++
++/**
++ * This function reads a setup packet from the Rx FIFO into the destination
++ * buffer. This function is called from the Rx Status Queue Level (RxStsQLvl)
++ * Interrupt routine when a SETUP packet has been received in Slave mode.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dest Destination buffer for packet data.
++ */
++void dwc_otg_read_setup_packet(dwc_otg_core_if_t * core_if, uint32_t * dest)
++{
++	device_grxsts_data_t status;
++	/* Get the 8 bytes of a setup transaction data */
++
++	/* Pop 2 DWORDS off the receive data FIFO into memory */
++	dest[0] = DWC_READ_REG32(core_if->data_fifo[0]);
++	dest[1] = DWC_READ_REG32(core_if->data_fifo[0]);
++	if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
++		status.d32 =
++		    DWC_READ_REG32(&core_if->core_global_regs->grxstsp);
++		DWC_DEBUGPL(DBG_ANY,
++			    "EP:%d BCnt:%d " "pktsts:%x Frame:%d(0x%0x)\n",
++			    status.b.epnum, status.b.bcnt, status.b.pktsts,
++			    status.b.fn, status.b.fn);
++	}
++}
++
++/**
++ * This function enables EP0 OUT to receive SETUP packets and configures EP0
++ * IN for transmitting packets. It is normally called when the
++ * "Enumeration Done" interrupt occurs.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP0 data.
++ */
++void dwc_otg_ep0_activate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	dsts_data_t dsts;
++	depctl_data_t diepctl;
++	depctl_data_t doepctl;
++	dctl_data_t dctl = {.d32 = 0 };
++
++	ep->stp_rollover = 0;
++	/* Read the Device Status and Endpoint 0 Control registers */
++	dsts.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dsts);
++	diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl);
++	doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl);
++
++	/* Set the MPS of the IN EP based on the enumeration speed */
++	switch (dsts.b.enumspd) {
++	case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
++	case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
++	case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
++		diepctl.b.mps = DWC_DEP0CTL_MPS_64;
++		break;
++	case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
++		diepctl.b.mps = DWC_DEP0CTL_MPS_8;
++		break;
++	}
++
++	DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32);
++
++	/* Enable OUT EP for receive */
++	if (core_if->snpsid <= OTG_CORE_REV_2_94a) {
++	doepctl.b.epena = 1;
++	DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
++	}
++#ifdef VERBOSE
++	DWC_DEBUGPL(DBG_PCDV, "doepctl0=%0x\n",
++		    DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl));
++	DWC_DEBUGPL(DBG_PCDV, "diepctl0=%0x\n",
++		    DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl));
++#endif
++	dctl.b.cgnpinnak = 1;
++
++	DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
++	DWC_DEBUGPL(DBG_PCDV, "dctl=%0x\n",
++		    DWC_READ_REG32(&dev_if->dev_global_regs->dctl));
++
++}
++
++/**
++ * This function activates an EP.  The Device EP control register for
++ * the EP is configured as defined in the ep structure. Note: This
++ * function is not used for EP0.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to activate.
++ */
++void dwc_otg_ep_activate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	depctl_data_t depctl;
++	volatile uint32_t *addr;
++	daint_data_t daintmsk = {.d32 = 0 };
++	dcfg_data_t dcfg;
++	uint8_t i;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, ep->num,
++		    (ep->is_in ? "IN" : "OUT"));
++
++#ifdef DWC_UTE_PER_IO
++	ep->xiso_frame_num = 0xFFFFFFFF;
++	ep->xiso_active_xfers = 0;
++	ep->xiso_queued_xfers = 0;
++#endif
++	/* Read DEPCTLn register */
++	if (ep->is_in == 1) {
++		addr = &dev_if->in_ep_regs[ep->num]->diepctl;
++		daintmsk.ep.in = 1 << ep->num;
++	} else {
++		addr = &dev_if->out_ep_regs[ep->num]->doepctl;
++		daintmsk.ep.out = 1 << ep->num;
++	}
++
++	/* If the EP is already active don't change the EP Control
++	 * register. */
++	depctl.d32 = DWC_READ_REG32(addr);
++	if (!depctl.b.usbactep) {
++		depctl.b.mps = ep->maxpacket;
++		depctl.b.eptype = ep->type;
++		depctl.b.txfnum = ep->tx_fifo_num;
++
++		if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
++			depctl.b.setd0pid = 1;	// ???
++		} else {
++			depctl.b.setd0pid = 1;
++		}
++		depctl.b.usbactep = 1;
++
++		/* Update nextep_seq array and EPMSCNT in DCFG*/
++		if (!(depctl.b.eptype & 1) && (ep->is_in == 1)) {	// NP IN EP
++			for (i = 0; i <= core_if->dev_if->num_in_eps; i++) {
++				if (core_if->nextep_seq[i] == core_if->first_in_nextep_seq)
++				break;
++			}
++			core_if->nextep_seq[i] = ep->num;
++			core_if->nextep_seq[ep->num] = core_if->first_in_nextep_seq;
++			depctl.b.nextep = core_if->nextep_seq[ep->num];
++			dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg);
++			dcfg.b.epmscnt++;
++			DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
++
++			DWC_DEBUGPL(DBG_PCDV,
++				    "%s first_in_nextep_seq= %2d; nextep_seq[]:\n",
++				__func__, core_if->first_in_nextep_seq);
++			for (i=0; i <= core_if->dev_if->num_in_eps; i++) {
++				DWC_DEBUGPL(DBG_PCDV, "%2d\n",
++					    core_if->nextep_seq[i]);
++			}
++
++		}
++
++
++		DWC_WRITE_REG32(addr, depctl.d32);
++		DWC_DEBUGPL(DBG_PCDV, "DEPCTL=%08x\n", DWC_READ_REG32(addr));
++	}
++
++	/* Enable the Interrupt for this EP */
++	if (core_if->multiproc_int_enable) {
++		if (ep->is_in == 1) {
++			diepmsk_data_t diepmsk = {.d32 = 0 };
++			diepmsk.b.xfercompl = 1;
++			diepmsk.b.timeout = 1;
++			diepmsk.b.epdisabled = 1;
++			diepmsk.b.ahberr = 1;
++			diepmsk.b.intknepmis = 1;
++			if (!core_if->en_multiple_tx_fifo && core_if->dma_enable)
++				diepmsk.b.intknepmis = 0;
++			diepmsk.b.txfifoundrn = 1;	//?????
++			if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
++				diepmsk.b.nak = 1;
++			}
++
++
++
++/*
++			if (core_if->dma_desc_enable) {
++				diepmsk.b.bna = 1;
++			}
++*/
++/*
++			if (core_if->dma_enable) {
++				doepmsk.b.nak = 1;
++			}
++*/
++			DWC_WRITE_REG32(&dev_if->dev_global_regs->
++					diepeachintmsk[ep->num], diepmsk.d32);
++
++		} else {
++			doepmsk_data_t doepmsk = {.d32 = 0 };
++			doepmsk.b.xfercompl = 1;
++			doepmsk.b.ahberr = 1;
++			doepmsk.b.epdisabled = 1;
++			if (ep->type == DWC_OTG_EP_TYPE_ISOC)
++				doepmsk.b.outtknepdis = 1;
++
++/*
++
++			if (core_if->dma_desc_enable) {
++				doepmsk.b.bna = 1;
++			}
++*/
++/*
++			doepmsk.b.babble = 1;
++			doepmsk.b.nyet = 1;
++			doepmsk.b.nak = 1;
++*/
++			DWC_WRITE_REG32(&dev_if->dev_global_regs->
++					doepeachintmsk[ep->num], doepmsk.d32);
++		}
++		DWC_MODIFY_REG32(&dev_if->dev_global_regs->deachintmsk,
++				 0, daintmsk.d32);
++	} else {
++		if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
++			if (ep->is_in) {
++				diepmsk_data_t diepmsk = {.d32 = 0 };
++				diepmsk.b.nak = 1;
++				DWC_MODIFY_REG32(&dev_if->dev_global_regs->diepmsk, 0, diepmsk.d32);
++			} else {
++				doepmsk_data_t doepmsk = {.d32 = 0 };
++				doepmsk.b.outtknepdis = 1;
++				DWC_MODIFY_REG32(&dev_if->dev_global_regs->doepmsk, 0, doepmsk.d32);
++			}
++		}
++		DWC_MODIFY_REG32(&dev_if->dev_global_regs->daintmsk,
++				 0, daintmsk.d32);
++	}
++
++	DWC_DEBUGPL(DBG_PCDV, "DAINTMSK=%0x\n",
++		    DWC_READ_REG32(&dev_if->dev_global_regs->daintmsk));
++
++	ep->stall_clear_flag = 0;
++
++	return;
++}
++
++/**
++ * This function deactivates an EP. This is done by clearing the USB Active
++ * EP bit in the Device EP control register. Note: This function is not used
++ * for EP0. EP0 cannot be deactivated.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to deactivate.
++ */
++void dwc_otg_ep_deactivate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	depctl_data_t depctl = {.d32 = 0 };
++	volatile uint32_t *addr;
++	daint_data_t daintmsk = {.d32 = 0 };
++	dcfg_data_t dcfg;
++	uint8_t i = 0;
++
++#ifdef DWC_UTE_PER_IO
++	ep->xiso_frame_num = 0xFFFFFFFF;
++	ep->xiso_active_xfers = 0;
++	ep->xiso_queued_xfers = 0;
++#endif
++
++	/* Read DEPCTLn register */
++	if (ep->is_in == 1) {
++		addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
++		daintmsk.ep.in = 1 << ep->num;
++	} else {
++		addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
++		daintmsk.ep.out = 1 << ep->num;
++	}
++
++	depctl.d32 = DWC_READ_REG32(addr);
++
++	depctl.b.usbactep = 0;
++
++	/* Update nextep_seq array and EPMSCNT in DCFG*/
++	if (!(depctl.b.eptype & 1) && ep->is_in == 1) {	// NP EP IN
++		for (i = 0; i <= core_if->dev_if->num_in_eps; i++) {
++			if (core_if->nextep_seq[i] == ep->num)
++			break;
++		}
++		core_if->nextep_seq[i] = core_if->nextep_seq[ep->num];
++		if (core_if->first_in_nextep_seq == ep->num)
++			core_if->first_in_nextep_seq = i;
++		core_if->nextep_seq[ep->num] = 0xff;
++		depctl.b.nextep = 0;
++		dcfg.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
++		dcfg.b.epmscnt--;
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg,
++				dcfg.d32);
++
++		DWC_DEBUGPL(DBG_PCDV,
++			    "%s first_in_nextep_seq= %2d; nextep_seq[]:\n",
++				__func__, core_if->first_in_nextep_seq);
++			for (i=0; i <= core_if->dev_if->num_in_eps; i++) {
++				DWC_DEBUGPL(DBG_PCDV, "%2d\n", core_if->nextep_seq[i]);
++			}
++	}
++
++	if (ep->is_in == 1)
++		depctl.b.txfnum = 0;
++
++	if (core_if->dma_desc_enable)
++		depctl.b.epdis = 1;
++
++	DWC_WRITE_REG32(addr, depctl.d32);
++	depctl.d32 = DWC_READ_REG32(addr);
++	if (core_if->dma_enable && ep->type == DWC_OTG_EP_TYPE_ISOC
++	    && depctl.b.epena) {
++		depctl_data_t depctl = {.d32 = 0};
++		if (ep->is_in) {
++			diepint_data_t diepint = {.d32 = 0};
++
++			depctl.b.snak = 1;
++			DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
++					diepctl, depctl.d32);
++			do {
++				dwc_udelay(10);
++				diepint.d32 =
++				    DWC_READ_REG32(&core_if->
++						   dev_if->in_ep_regs[ep->num]->
++						   diepint);
++			} while (!diepint.b.inepnakeff);
++			diepint.b.inepnakeff = 1;
++			DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
++					diepint, diepint.d32);
++			depctl.d32 = 0;
++			depctl.b.epdis = 1;
++			DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
++					diepctl, depctl.d32);
++			do {
++				dwc_udelay(10);
++				diepint.d32 =
++				    DWC_READ_REG32(&core_if->
++						   dev_if->in_ep_regs[ep->num]->
++						   diepint);
++			} while (!diepint.b.epdisabled);
++			diepint.b.epdisabled = 1;
++			DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
++					diepint, diepint.d32);
++		} else {
++			dctl_data_t dctl = {.d32 = 0};
++			gintmsk_data_t gintsts = {.d32 = 0};
++			doepint_data_t doepint = {.d32 = 0};
++			dctl.b.sgoutnak = 1;
++			DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
++					 dctl, 0, dctl.d32);
++			do {
++				dwc_udelay(10);
++				gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++			} while (!gintsts.b.goutnakeff);
++			gintsts.d32 = 0;
++			gintsts.b.goutnakeff = 1;
++			DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++			depctl.d32 = 0;
++			depctl.b.epdis = 1;
++			depctl.b.snak = 1;
++			DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]->doepctl, depctl.d32);
++			do
++			{
++				dwc_udelay(10);
++				doepint.d32 = DWC_READ_REG32(&core_if->dev_if->
++											out_ep_regs[ep->num]->doepint);
++			} while (!doepint.b.epdisabled);
++
++			doepint.b.epdisabled = 1;
++			DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]->doepint, doepint.d32);
++
++			dctl.d32 = 0;
++			dctl.b.cgoutnak = 1;
++			DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
++		}
++	}
++
++	/* Disable the Interrupt for this EP */
++	if (core_if->multiproc_int_enable) {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->deachintmsk,
++				 daintmsk.d32, 0);
++
++		if (ep->is_in == 1) {
++			DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->
++					diepeachintmsk[ep->num], 0);
++		} else {
++			DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->
++					doepeachintmsk[ep->num], 0);
++		}
++	} else {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->daintmsk,
++				 daintmsk.d32, 0);
++	}
++
++}
++
++/**
++ * This function initializes dma descriptor chain.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ */
++static void init_dma_desc_chain(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	dwc_otg_dev_dma_desc_t *dma_desc;
++	uint32_t offset;
++	uint32_t xfer_est;
++	int i;
++	unsigned maxxfer_local, total_len;
++
++	if (!ep->is_in && ep->type == DWC_OTG_EP_TYPE_INTR &&
++					(ep->maxpacket%4)) {
++		maxxfer_local = ep->maxpacket;
++		total_len = ep->xfer_len;
++	} else {
++		maxxfer_local = ep->maxxfer;
++		total_len = ep->total_len;
++	}
++
++	ep->desc_cnt = (total_len / maxxfer_local) +
++            ((total_len % maxxfer_local) ? 1 : 0);
++
++	if (!ep->desc_cnt)
++		ep->desc_cnt = 1;
++
++	if (ep->desc_cnt > MAX_DMA_DESC_CNT)
++		ep->desc_cnt = MAX_DMA_DESC_CNT;
++
++	dma_desc = ep->desc_addr;
++	if (maxxfer_local == ep->maxpacket) {
++		if ((total_len % maxxfer_local) &&
++				(total_len/maxxfer_local < MAX_DMA_DESC_CNT)) {
++			xfer_est = (ep->desc_cnt - 1) * maxxfer_local +
++					(total_len % maxxfer_local);
++		} else
++			xfer_est = ep->desc_cnt * maxxfer_local;
++	} else
++		xfer_est = total_len;
++	offset = 0;
++	for (i = 0; i < ep->desc_cnt; ++i) {
++		/** DMA Descriptor Setup */
++		if (xfer_est > maxxfer_local) {
++			dma_desc->status.b.bs = BS_HOST_BUSY;
++			dma_desc->status.b.l = 0;
++			dma_desc->status.b.ioc = 0;
++			dma_desc->status.b.sp = 0;
++			dma_desc->status.b.bytes = maxxfer_local;
++			dma_desc->buf = ep->dma_addr + offset;
++			dma_desc->status.b.sts = 0;
++			dma_desc->status.b.bs = BS_HOST_READY;
++
++			xfer_est -= maxxfer_local;
++			offset += maxxfer_local;
++		} else {
++			dma_desc->status.b.bs = BS_HOST_BUSY;
++			dma_desc->status.b.l = 1;
++			dma_desc->status.b.ioc = 1;
++			if (ep->is_in) {
++				dma_desc->status.b.sp =
++				    (xfer_est %
++				     ep->maxpacket) ? 1 : ((ep->
++							    sent_zlp) ? 1 : 0);
++				dma_desc->status.b.bytes = xfer_est;
++			} else {
++				if (maxxfer_local == ep->maxpacket)
++					dma_desc->status.b.bytes = xfer_est;
++				else
++					dma_desc->status.b.bytes =
++						xfer_est + ((4 - (xfer_est & 0x3)) & 0x3);
++			}
++
++			dma_desc->buf = ep->dma_addr + offset;
++			dma_desc->status.b.sts = 0;
++			dma_desc->status.b.bs = BS_HOST_READY;
++		}
++		dma_desc++;
++	}
++}
++/**
++ * This function is called when to write ISOC data into appropriate dedicated
++ * periodic FIFO.
++ */
++static int32_t write_isoc_tx_fifo(dwc_otg_core_if_t * core_if, dwc_ep_t * dwc_ep)
++{
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	dwc_otg_dev_in_ep_regs_t *ep_regs;
++	dtxfsts_data_t txstatus = {.d32 = 0 };
++	uint32_t len = 0;
++	int epnum = dwc_ep->num;
++	int dwords;
++
++	DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %d \n", epnum);
++
++	ep_regs = core_if->dev_if->in_ep_regs[epnum];
++
++	len = dwc_ep->xfer_len - dwc_ep->xfer_count;
++
++	if (len > dwc_ep->maxpacket) {
++		len = dwc_ep->maxpacket;
++	}
++
++	dwords = (len + 3) / 4;
++
++	/* While there is space in the queue and space in the FIFO and
++	 * More data to tranfer, Write packets to the Tx FIFO */
++	txstatus.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts);
++	DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32);
++
++	while (txstatus.b.txfspcavail > dwords &&
++	       dwc_ep->xfer_count < dwc_ep->xfer_len && dwc_ep->xfer_len != 0) {
++		/* Write the FIFO */
++		dwc_otg_ep_write_packet(core_if, dwc_ep, 0);
++
++		len = dwc_ep->xfer_len - dwc_ep->xfer_count;
++		if (len > dwc_ep->maxpacket) {
++			len = dwc_ep->maxpacket;
++		}
++
++		dwords = (len + 3) / 4;
++		txstatus.d32 =
++		    DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts);
++		DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", epnum,
++			    txstatus.d32);
++	}
++
++	DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum,
++		    DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts));
++
++	return 1;
++}
++/**
++ * This function does the setup for a data transfer for an EP and
++ * starts the transfer. For an IN transfer, the packets will be
++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
++ * the packets are unloaded from the Rx FIFO in the ISR.  the ISR.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ */
++
++void dwc_otg_ep_start_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	depctl_data_t depctl;
++	deptsiz_data_t deptsiz;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
++	DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
++		    "xfer_buff=%p start_xfer_buff=%p, total_len = %d\n",
++		    ep->num, (ep->is_in ? "IN" : "OUT"), ep->xfer_len,
++		    ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff,
++		    ep->total_len);
++	/* IN endpoint */
++	if (ep->is_in == 1) {
++		dwc_otg_dev_in_ep_regs_t *in_regs =
++		    core_if->dev_if->in_ep_regs[ep->num];
++
++		gnptxsts_data_t gtxstatus;
++
++		gtxstatus.d32 =
++		    DWC_READ_REG32(&core_if->core_global_regs->gnptxsts);
++
++		if (core_if->en_multiple_tx_fifo == 0
++		    && gtxstatus.b.nptxqspcavail == 0 && !core_if->dma_enable) {
++#ifdef DEBUG
++			DWC_PRINTF("TX Queue Full (0x%0x)\n", gtxstatus.d32);
++#endif
++			return;
++		}
++
++		depctl.d32 = DWC_READ_REG32(&(in_regs->diepctl));
++		deptsiz.d32 = DWC_READ_REG32(&(in_regs->dieptsiz));
++
++		if (ep->maxpacket > ep->maxxfer / MAX_PKT_CNT)
++			ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ?
++				ep->maxxfer : (ep->total_len - ep->xfer_len);
++		else
++			ep->xfer_len += (MAX_PKT_CNT * ep->maxpacket < (ep->total_len - ep->xfer_len)) ?
++				 MAX_PKT_CNT * ep->maxpacket : (ep->total_len - ep->xfer_len);
++
++
++		/* Zero Length Packet? */
++		if ((ep->xfer_len - ep->xfer_count) == 0) {
++			deptsiz.b.xfersize = 0;
++			deptsiz.b.pktcnt = 1;
++		} else {
++			/* Program the transfer size and packet count
++			 *      as follows: xfersize = N * maxpacket +
++			 *      short_packet pktcnt = N + (short_packet
++			 *      exist ? 1 : 0)
++			 */
++			deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count;
++			deptsiz.b.pktcnt =
++			    (ep->xfer_len - ep->xfer_count - 1 +
++			     ep->maxpacket) / ep->maxpacket;
++			if (deptsiz.b.pktcnt > MAX_PKT_CNT) {
++				deptsiz.b.pktcnt = MAX_PKT_CNT;
++				deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
++			}
++			if (ep->type == DWC_OTG_EP_TYPE_ISOC)
++				deptsiz.b.mc = deptsiz.b.pktcnt;
++		}
++
++		/* Write the DMA register */
++		if (core_if->dma_enable) {
++			if (core_if->dma_desc_enable == 0) {
++				if (ep->type != DWC_OTG_EP_TYPE_ISOC)
++					deptsiz.b.mc = 1;
++				DWC_WRITE_REG32(&in_regs->dieptsiz,
++						deptsiz.d32);
++				DWC_WRITE_REG32(&(in_regs->diepdma),
++						(uint32_t) ep->dma_addr);
++			} else {
++#ifdef DWC_UTE_CFI
++				/* The descriptor chain should be already initialized by now */
++				if (ep->buff_mode != BM_STANDARD) {
++					DWC_WRITE_REG32(&in_regs->diepdma,
++							ep->descs_dma_addr);
++				} else {
++#endif
++					init_dma_desc_chain(core_if, ep);
++				/** DIEPDMAn Register write */
++					DWC_WRITE_REG32(&in_regs->diepdma,
++							ep->dma_desc_addr);
++#ifdef DWC_UTE_CFI
++				}
++#endif
++			}
++		} else {
++			DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32);
++			if (ep->type != DWC_OTG_EP_TYPE_ISOC) {
++				/**
++				 * Enable the Non-Periodic Tx FIFO empty interrupt,
++				 * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
++				 * the data will be written into the fifo by the ISR.
++				 */
++				if (core_if->en_multiple_tx_fifo == 0) {
++					intr_mask.b.nptxfempty = 1;
++					DWC_MODIFY_REG32
++					    (&core_if->core_global_regs->gintmsk,
++					     intr_mask.d32, intr_mask.d32);
++				} else {
++					/* Enable the Tx FIFO Empty Interrupt for this EP */
++					if (ep->xfer_len > 0) {
++						uint32_t fifoemptymsk = 0;
++						fifoemptymsk = 1 << ep->num;
++						DWC_MODIFY_REG32
++						    (&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++						     0, fifoemptymsk);
++
++					}
++				}
++			}  else {
++					 write_isoc_tx_fifo(core_if, ep);
++			}
++		}
++		if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable)
++			depctl.b.nextep = core_if->nextep_seq[ep->num];
++
++		if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
++			dsts_data_t dsts = {.d32 = 0};
++			if (ep->bInterval == 1) {
++				dsts.d32 =
++				    DWC_READ_REG32(&core_if->dev_if->
++						   dev_global_regs->dsts);
++				ep->frame_num = dsts.b.soffn + ep->bInterval;
++				if (ep->frame_num > 0x3FFF) {
++					ep->frm_overrun = 1;
++					ep->frame_num &= 0x3FFF;
++				} else
++					ep->frm_overrun = 0;
++				if (ep->frame_num & 0x1) {
++					depctl.b.setd1pid = 1;
++				} else {
++					depctl.b.setd0pid = 1;
++				}
++			}
++		}
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32);
++
++	} else {
++		/* OUT endpoint */
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++		    core_if->dev_if->out_ep_regs[ep->num];
++
++		depctl.d32 = DWC_READ_REG32(&(out_regs->doepctl));
++		deptsiz.d32 = DWC_READ_REG32(&(out_regs->doeptsiz));
++
++		if (!core_if->dma_desc_enable) {
++			if (ep->maxpacket > ep->maxxfer / MAX_PKT_CNT)
++				ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ?
++				ep->maxxfer : (ep->total_len - ep->xfer_len);
++                else
++					ep->xfer_len += (MAX_PKT_CNT * ep->maxpacket < (ep->total_len
++					- ep->xfer_len)) ? MAX_PKT_CNT * ep->maxpacket : (ep->total_len - ep->xfer_len);
++		}
++
++		/* Program the transfer size and packet count as follows:
++		 *
++		 *      pktcnt = N
++		 *      xfersize = N * maxpacket
++		 */
++		if ((ep->xfer_len - ep->xfer_count) == 0) {
++			/* Zero Length Packet */
++			deptsiz.b.xfersize = ep->maxpacket;
++			deptsiz.b.pktcnt = 1;
++		} else {
++			deptsiz.b.pktcnt =
++			    (ep->xfer_len - ep->xfer_count +
++			     (ep->maxpacket - 1)) / ep->maxpacket;
++			if (deptsiz.b.pktcnt > MAX_PKT_CNT) {
++				deptsiz.b.pktcnt = MAX_PKT_CNT;
++			}
++			if (!core_if->dma_desc_enable) {
++				ep->xfer_len =
++					deptsiz.b.pktcnt * ep->maxpacket + ep->xfer_count;
++			}
++			deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count;
++		}
++
++		DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n",
++			    ep->num, deptsiz.b.xfersize, deptsiz.b.pktcnt);
++
++		if (core_if->dma_enable) {
++			if (!core_if->dma_desc_enable) {
++				DWC_WRITE_REG32(&out_regs->doeptsiz,
++						deptsiz.d32);
++
++				DWC_WRITE_REG32(&(out_regs->doepdma),
++						(uint32_t) ep->dma_addr);
++			} else {
++#ifdef DWC_UTE_CFI
++				/* The descriptor chain should be already initialized by now */
++				if (ep->buff_mode != BM_STANDARD) {
++					DWC_WRITE_REG32(&out_regs->doepdma,
++							ep->descs_dma_addr);
++				} else {
++#endif
++					/** This is used for interrupt out transfers*/
++					if (!ep->xfer_len)
++						ep->xfer_len = ep->total_len;
++					init_dma_desc_chain(core_if, ep);
++
++					if (core_if->core_params->dev_out_nak) {
++						if (ep->type == DWC_OTG_EP_TYPE_BULK) {
++							deptsiz.b.pktcnt = (ep->total_len +
++								(ep->maxpacket - 1)) / ep->maxpacket;
++							deptsiz.b.xfersize = ep->total_len;
++							/* Remember initial value of doeptsiz */
++							core_if->start_doeptsiz_val[ep->num] = deptsiz.d32;
++							DWC_WRITE_REG32(&out_regs->doeptsiz,
++								deptsiz.d32);
++						}
++					}
++				/** DOEPDMAn Register write */
++					DWC_WRITE_REG32(&out_regs->doepdma,
++							ep->dma_desc_addr);
++#ifdef DWC_UTE_CFI
++				}
++#endif
++			}
++		} else {
++			DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32);
++		}
++
++		if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
++			dsts_data_t dsts = {.d32 = 0};
++			if (ep->bInterval == 1) {
++				dsts.d32 =
++				    DWC_READ_REG32(&core_if->dev_if->
++						   dev_global_regs->dsts);
++				ep->frame_num = dsts.b.soffn + ep->bInterval;
++				if (ep->frame_num > 0x3FFF) {
++					ep->frm_overrun = 1;
++					ep->frame_num &= 0x3FFF;
++				} else
++					ep->frm_overrun = 0;
++
++				if (ep->frame_num & 0x1) {
++					depctl.b.setd1pid = 1;
++				} else {
++					depctl.b.setd0pid = 1;
++				}
++			}
++		}
++
++		/* EP enable */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++
++		DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32);
++
++		DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n",
++			    DWC_READ_REG32(&out_regs->doepctl),
++			    DWC_READ_REG32(&out_regs->doeptsiz));
++		DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
++			    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->
++					   daintmsk),
++			    DWC_READ_REG32(&core_if->core_global_regs->
++					   gintmsk));
++
++		/* Timer is scheduling only for out bulk transfers for
++		 * "Device DDMA OUT NAK Enhancement" feature to inform user
++		 * about received data payload in case of timeout
++		 */
++		if (core_if->core_params->dev_out_nak) {
++			if (ep->type == DWC_OTG_EP_TYPE_BULK) {
++				core_if->ep_xfer_info[ep->num].core_if = core_if;
++				core_if->ep_xfer_info[ep->num].ep = ep;
++				core_if->ep_xfer_info[ep->num].state = 1;
++
++				/* Start a timer for this transfer. */
++				DWC_TIMER_SCHEDULE(core_if->ep_xfer_timer[ep->num], 10000);
++			}
++		}
++	}
++}
++
++/**
++ * This function setup a zero length transfer in Buffer DMA and
++ * Slave modes for usb requests with zero field set
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++
++	depctl_data_t depctl;
++	deptsiz_data_t deptsiz;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
++	DWC_PRINTF("zero length transfer is called\n");
++
++	/* IN endpoint */
++	if (ep->is_in == 1) {
++		dwc_otg_dev_in_ep_regs_t *in_regs =
++		    core_if->dev_if->in_ep_regs[ep->num];
++
++		depctl.d32 = DWC_READ_REG32(&(in_regs->diepctl));
++		deptsiz.d32 = DWC_READ_REG32(&(in_regs->dieptsiz));
++
++		deptsiz.b.xfersize = 0;
++		deptsiz.b.pktcnt = 1;
++
++		/* Write the DMA register */
++		if (core_if->dma_enable) {
++			if (core_if->dma_desc_enable == 0) {
++				deptsiz.b.mc = 1;
++				DWC_WRITE_REG32(&in_regs->dieptsiz,
++						deptsiz.d32);
++				DWC_WRITE_REG32(&(in_regs->diepdma),
++						(uint32_t) ep->dma_addr);
++			}
++		} else {
++			DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32);
++			/**
++			 * Enable the Non-Periodic Tx FIFO empty interrupt,
++			 * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
++			 * the data will be written into the fifo by the ISR.
++			 */
++			if (core_if->en_multiple_tx_fifo == 0) {
++				intr_mask.b.nptxfempty = 1;
++				DWC_MODIFY_REG32(&core_if->
++						 core_global_regs->gintmsk,
++						 intr_mask.d32, intr_mask.d32);
++			} else {
++				/* Enable the Tx FIFO Empty Interrupt for this EP */
++				if (ep->xfer_len > 0) {
++					uint32_t fifoemptymsk = 0;
++					fifoemptymsk = 1 << ep->num;
++					DWC_MODIFY_REG32(&core_if->
++							 dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++							 0, fifoemptymsk);
++				}
++			}
++		}
++
++		if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable)
++			depctl.b.nextep = core_if->nextep_seq[ep->num];
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32);
++
++	} else {
++		/* OUT endpoint */
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++		    core_if->dev_if->out_ep_regs[ep->num];
++
++		depctl.d32 = DWC_READ_REG32(&(out_regs->doepctl));
++		deptsiz.d32 = DWC_READ_REG32(&(out_regs->doeptsiz));
++
++		/* Zero Length Packet */
++		deptsiz.b.xfersize = ep->maxpacket;
++		deptsiz.b.pktcnt = 1;
++
++		if (core_if->dma_enable) {
++			if (!core_if->dma_desc_enable) {
++				DWC_WRITE_REG32(&out_regs->doeptsiz,
++						deptsiz.d32);
++
++				DWC_WRITE_REG32(&(out_regs->doepdma),
++						(uint32_t) ep->dma_addr);
++			}
++		} else {
++			DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32);
++		}
++
++		/* EP enable */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++
++		DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32);
++
++	}
++}
++
++/**
++ * This function does the setup for a data transfer for EP0 and starts
++ * the transfer.  For an IN transfer, the packets will be loaded into
++ * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are
++ * unloaded from the Rx FIFO in the ISR.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP0 data.
++ */
++void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	depctl_data_t depctl;
++	deptsiz0_data_t deptsiz;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	dwc_otg_dev_dma_desc_t *dma_desc;
++
++	DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
++		    "xfer_buff=%p start_xfer_buff=%p \n",
++		    ep->num, (ep->is_in ? "IN" : "OUT"), ep->xfer_len,
++		    ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff);
++
++	ep->total_len = ep->xfer_len;
++
++	/* IN endpoint */
++	if (ep->is_in == 1) {
++		dwc_otg_dev_in_ep_regs_t *in_regs =
++		    core_if->dev_if->in_ep_regs[0];
++
++		gnptxsts_data_t gtxstatus;
++
++		if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
++			depctl.d32 = DWC_READ_REG32(&in_regs->diepctl);
++			if (depctl.b.epena)
++				return;
++		}
++
++		gtxstatus.d32 =
++		    DWC_READ_REG32(&core_if->core_global_regs->gnptxsts);
++
++		/* If dedicated FIFO every time flush fifo before enable ep*/
++		if (core_if->en_multiple_tx_fifo && core_if->snpsid >= OTG_CORE_REV_3_00a)
++			dwc_otg_flush_tx_fifo(core_if, ep->tx_fifo_num);
++
++		if (core_if->en_multiple_tx_fifo == 0
++		    && gtxstatus.b.nptxqspcavail == 0
++		    && !core_if->dma_enable) {
++#ifdef DEBUG
++			deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz);
++			DWC_DEBUGPL(DBG_PCD, "DIEPCTL0=%0x\n",
++				    DWC_READ_REG32(&in_regs->diepctl));
++			DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n",
++				    deptsiz.d32,
++				    deptsiz.b.xfersize, deptsiz.b.pktcnt);
++			DWC_PRINTF("TX Queue or FIFO Full (0x%0x)\n",
++				   gtxstatus.d32);
++#endif
++			return;
++		}
++
++		depctl.d32 = DWC_READ_REG32(&in_regs->diepctl);
++		deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz);
++
++		/* Zero Length Packet? */
++		if (ep->xfer_len == 0) {
++			deptsiz.b.xfersize = 0;
++			deptsiz.b.pktcnt = 1;
++		} else {
++			/* Program the transfer size and packet count
++			 *      as follows: xfersize = N * maxpacket +
++			 *      short_packet pktcnt = N + (short_packet
++			 *      exist ? 1 : 0)
++			 */
++			if (ep->xfer_len > ep->maxpacket) {
++				ep->xfer_len = ep->maxpacket;
++				deptsiz.b.xfersize = ep->maxpacket;
++			} else {
++				deptsiz.b.xfersize = ep->xfer_len;
++			}
++			deptsiz.b.pktcnt = 1;
++
++		}
++		DWC_DEBUGPL(DBG_PCDV,
++			    "IN len=%d  xfersize=%d pktcnt=%d [%08x]\n",
++			    ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt,
++			    deptsiz.d32);
++
++		/* Write the DMA register */
++		if (core_if->dma_enable) {
++			if (core_if->dma_desc_enable == 0) {
++				DWC_WRITE_REG32(&in_regs->dieptsiz,
++						deptsiz.d32);
++
++				DWC_WRITE_REG32(&(in_regs->diepdma),
++						(uint32_t) ep->dma_addr);
++			} else {
++				dma_desc = core_if->dev_if->in_desc_addr;
++
++				/** DMA Descriptor Setup */
++				dma_desc->status.b.bs = BS_HOST_BUSY;
++				dma_desc->status.b.l = 1;
++				dma_desc->status.b.ioc = 1;
++				dma_desc->status.b.sp =
++				    (ep->xfer_len == ep->maxpacket) ? 0 : 1;
++				dma_desc->status.b.bytes = ep->xfer_len;
++				dma_desc->buf = ep->dma_addr;
++				dma_desc->status.b.sts = 0;
++				dma_desc->status.b.bs = BS_HOST_READY;
++
++				/** DIEPDMA0 Register write */
++				DWC_WRITE_REG32(&in_regs->diepdma,
++						core_if->
++						dev_if->dma_in_desc_addr);
++			}
++		} else {
++			DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32);
++		}
++
++		if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable)
++			depctl.b.nextep = core_if->nextep_seq[ep->num];
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32);
++
++		/**
++		 * Enable the Non-Periodic Tx FIFO empty interrupt, the
++		 * data will be written into the fifo by the ISR.
++		 */
++		if (!core_if->dma_enable) {
++			if (core_if->en_multiple_tx_fifo == 0) {
++				intr_mask.b.nptxfempty = 1;
++				DWC_MODIFY_REG32(&core_if->
++						 core_global_regs->gintmsk,
++						 intr_mask.d32, intr_mask.d32);
++			} else {
++				/* Enable the Tx FIFO Empty Interrupt for this EP */
++				if (ep->xfer_len > 0) {
++					uint32_t fifoemptymsk = 0;
++					fifoemptymsk |= 1 << ep->num;
++					DWC_MODIFY_REG32(&core_if->
++							 dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++							 0, fifoemptymsk);
++				}
++			}
++		}
++	} else {
++		/* OUT endpoint */
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++		    core_if->dev_if->out_ep_regs[0];
++
++		depctl.d32 = DWC_READ_REG32(&out_regs->doepctl);
++		deptsiz.d32 = DWC_READ_REG32(&out_regs->doeptsiz);
++
++		/* Program the transfer size and packet count as follows:
++		 *      xfersize = N * (maxpacket + 4 - (maxpacket % 4))
++		 *      pktcnt = N                                                                                      */
++		/* Zero Length Packet */
++		deptsiz.b.xfersize = ep->maxpacket;
++		deptsiz.b.pktcnt = 1;
++		if (core_if->snpsid >= OTG_CORE_REV_3_00a)
++			deptsiz.b.supcnt = 3;
++
++		DWC_DEBUGPL(DBG_PCDV, "len=%d  xfersize=%d pktcnt=%d\n",
++			    ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt);
++
++		if (core_if->dma_enable) {
++			if (!core_if->dma_desc_enable) {
++				DWC_WRITE_REG32(&out_regs->doeptsiz,
++						deptsiz.d32);
++
++				DWC_WRITE_REG32(&(out_regs->doepdma),
++						(uint32_t) ep->dma_addr);
++			} else {
++				dma_desc = core_if->dev_if->out_desc_addr;
++
++				/** DMA Descriptor Setup */
++				dma_desc->status.b.bs = BS_HOST_BUSY;
++				if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
++					dma_desc->status.b.mtrf = 0;
++					dma_desc->status.b.sr = 0;
++				}
++				dma_desc->status.b.l = 1;
++				dma_desc->status.b.ioc = 1;
++				dma_desc->status.b.bytes = ep->maxpacket;
++				dma_desc->buf = ep->dma_addr;
++				dma_desc->status.b.sts = 0;
++				dma_desc->status.b.bs = BS_HOST_READY;
++
++				/** DOEPDMA0 Register write */
++				DWC_WRITE_REG32(&out_regs->doepdma,
++						core_if->dev_if->
++						dma_out_desc_addr);
++			}
++		} else {
++			DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32);
++		}
++
++		/* EP enable */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		DWC_WRITE_REG32(&(out_regs->doepctl), depctl.d32);
++	}
++}
++
++/**
++ * This function continues control IN transfers started by
++ * dwc_otg_ep0_start_transfer, when the transfer does not fit in a
++ * single packet.  NOTE: The DIEPCTL0/DOEPCTL0 registers only have one
++ * bit for the packet count.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP0 data.
++ */
++void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	depctl_data_t depctl;
++	deptsiz0_data_t deptsiz;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	dwc_otg_dev_dma_desc_t *dma_desc;
++
++	if (ep->is_in == 1) {
++		dwc_otg_dev_in_ep_regs_t *in_regs =
++		    core_if->dev_if->in_ep_regs[0];
++		gnptxsts_data_t tx_status = {.d32 = 0 };
++
++		tx_status.d32 =
++		    DWC_READ_REG32(&core_if->core_global_regs->gnptxsts);
++		/** @todo Should there be check for room in the Tx
++		 * Status Queue.  If not remove the code above this comment. */
++
++		depctl.d32 = DWC_READ_REG32(&in_regs->diepctl);
++		deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz);
++
++		/* Program the transfer size and packet count
++		 *      as follows: xfersize = N * maxpacket +
++		 *      short_packet pktcnt = N + (short_packet
++		 *      exist ? 1 : 0)
++		 */
++
++		if (core_if->dma_desc_enable == 0) {
++			deptsiz.b.xfersize =
++			    (ep->total_len - ep->xfer_count) >
++			    ep->maxpacket ? ep->maxpacket : (ep->total_len -
++							     ep->xfer_count);
++			deptsiz.b.pktcnt = 1;
++			if (core_if->dma_enable == 0) {
++				ep->xfer_len += deptsiz.b.xfersize;
++			} else {
++				ep->xfer_len = deptsiz.b.xfersize;
++			}
++			DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32);
++		} else {
++			ep->xfer_len =
++			    (ep->total_len - ep->xfer_count) >
++			    ep->maxpacket ? ep->maxpacket : (ep->total_len -
++							     ep->xfer_count);
++
++			dma_desc = core_if->dev_if->in_desc_addr;
++
++			/** DMA Descriptor Setup */
++			dma_desc->status.b.bs = BS_HOST_BUSY;
++			dma_desc->status.b.l = 1;
++			dma_desc->status.b.ioc = 1;
++			dma_desc->status.b.sp =
++			    (ep->xfer_len == ep->maxpacket) ? 0 : 1;
++			dma_desc->status.b.bytes = ep->xfer_len;
++			dma_desc->buf = ep->dma_addr;
++			dma_desc->status.b.sts = 0;
++			dma_desc->status.b.bs = BS_HOST_READY;
++
++			/** DIEPDMA0 Register write */
++			DWC_WRITE_REG32(&in_regs->diepdma,
++					core_if->dev_if->dma_in_desc_addr);
++		}
++
++		DWC_DEBUGPL(DBG_PCDV,
++			    "IN len=%d  xfersize=%d pktcnt=%d [%08x]\n",
++			    ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt,
++			    deptsiz.d32);
++
++		/* Write the DMA register */
++		if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
++			if (core_if->dma_desc_enable == 0)
++				DWC_WRITE_REG32(&(in_regs->diepdma),
++						(uint32_t) ep->dma_addr);
++		}
++		if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable)
++			depctl.b.nextep = core_if->nextep_seq[ep->num];
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32);
++
++		/**
++		 * Enable the Non-Periodic Tx FIFO empty interrupt, the
++		 * data will be written into the fifo by the ISR.
++		 */
++		if (!core_if->dma_enable) {
++			if (core_if->en_multiple_tx_fifo == 0) {
++				/* First clear it from GINTSTS */
++				intr_mask.b.nptxfempty = 1;
++				DWC_MODIFY_REG32(&core_if->
++						 core_global_regs->gintmsk,
++						 intr_mask.d32, intr_mask.d32);
++
++			} else {
++				/* Enable the Tx FIFO Empty Interrupt for this EP */
++				if (ep->xfer_len > 0) {
++					uint32_t fifoemptymsk = 0;
++					fifoemptymsk |= 1 << ep->num;
++					DWC_MODIFY_REG32(&core_if->
++							 dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++							 0, fifoemptymsk);
++				}
++			}
++		}
++	} else {
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++		    core_if->dev_if->out_ep_regs[0];
++
++		depctl.d32 = DWC_READ_REG32(&out_regs->doepctl);
++		deptsiz.d32 = DWC_READ_REG32(&out_regs->doeptsiz);
++
++		/* Program the transfer size and packet count
++		 *      as follows: xfersize = N * maxpacket +
++		 *      short_packet pktcnt = N + (short_packet
++		 *      exist ? 1 : 0)
++		 */
++		deptsiz.b.xfersize = ep->maxpacket;
++		deptsiz.b.pktcnt = 1;
++
++		if (core_if->dma_desc_enable == 0) {
++			DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32);
++		} else {
++			dma_desc = core_if->dev_if->out_desc_addr;
++
++			/** DMA Descriptor Setup */
++			dma_desc->status.b.bs = BS_HOST_BUSY;
++			dma_desc->status.b.l = 1;
++			dma_desc->status.b.ioc = 1;
++			dma_desc->status.b.bytes = ep->maxpacket;
++			dma_desc->buf = ep->dma_addr;
++			dma_desc->status.b.sts = 0;
++			dma_desc->status.b.bs = BS_HOST_READY;
++
++			/** DOEPDMA0 Register write */
++			DWC_WRITE_REG32(&out_regs->doepdma,
++					core_if->dev_if->dma_out_desc_addr);
++		}
++
++		DWC_DEBUGPL(DBG_PCDV,
++			    "IN len=%d  xfersize=%d pktcnt=%d [%08x]\n",
++			    ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt,
++			    deptsiz.d32);
++
++		/* Write the DMA register */
++		if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
++			if (core_if->dma_desc_enable == 0)
++				DWC_WRITE_REG32(&(out_regs->doepdma),
++						(uint32_t) ep->dma_addr);
++
++		}
++
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32);
++
++	}
++}
++
++#ifdef DEBUG
++void dump_msg(const u8 * buf, unsigned int length)
++{
++	unsigned int start, num, i;
++	char line[52], *p;
++
++	if (length >= 512)
++		return;
++	start = 0;
++	while (length > 0) {
++		num = length < 16u ? length : 16u;
++		p = line;
++		for (i = 0; i < num; ++i) {
++			if (i == 8)
++				*p++ = ' ';
++			DWC_SPRINTF(p, " %02x", buf[i]);
++			p += 3;
++		}
++		*p = 0;
++		DWC_PRINTF("%6x: %s\n", start, line);
++		buf += num;
++		start += num;
++		length -= num;
++	}
++}
++#else
++static inline void dump_msg(const u8 * buf, unsigned int length)
++{
++}
++#endif
++
++/**
++ * This function writes a packet into the Tx FIFO associated with the
++ * EP. For non-periodic EPs the non-periodic Tx FIFO is written.  For
++ * periodic EPs the periodic Tx FIFO associated with the EP is written
++ * with all packets for the next micro-frame.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to write packet for.
++ * @param dma Indicates if DMA is being used.
++ */
++void dwc_otg_ep_write_packet(dwc_otg_core_if_t * core_if, dwc_ep_t * ep,
++			     int dma)
++{
++	/**
++	 * The buffer is padded to DWORD on a per packet basis in
++	 * slave/dma mode if the MPS is not DWORD aligned. The last
++	 * packet, if short, is also padded to a multiple of DWORD.
++	 *
++	 * ep->xfer_buff always starts DWORD aligned in memory and is a
++	 * multiple of DWORD in length
++	 *
++	 * ep->xfer_len can be any number of bytes
++	 *
++	 * ep->xfer_count is a multiple of ep->maxpacket until the last
++	 *	packet
++	 *
++	 * FIFO access is DWORD */
++
++	uint32_t i;
++	uint32_t byte_count;
++	uint32_t dword_count;
++	uint32_t *fifo;
++	uint32_t *data_buff = (uint32_t *) ep->xfer_buff;
++
++	DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, core_if,
++		    ep);
++	if (ep->xfer_count >= ep->xfer_len) {
++		DWC_WARN("%s() No data for EP%d!!!\n", __func__, ep->num);
++		return;
++	}
++
++	/* Find the byte length of the packet either short packet or MPS */
++	if ((ep->xfer_len - ep->xfer_count) < ep->maxpacket) {
++		byte_count = ep->xfer_len - ep->xfer_count;
++	} else {
++		byte_count = ep->maxpacket;
++	}
++
++	/* Find the DWORD length, padded by extra bytes as neccessary if MPS
++	 * is not a multiple of DWORD */
++	dword_count = (byte_count + 3) / 4;
++
++#ifdef VERBOSE
++	dump_msg(ep->xfer_buff, byte_count);
++#endif
++
++	/**@todo NGS Where are the Periodic Tx FIFO addresses
++	 * intialized?	What should this be? */
++
++	fifo = core_if->data_fifo[ep->num];
++
++	DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n",
++		    fifo, data_buff, *data_buff, byte_count);
++
++	if (!dma) {
++		for (i = 0; i < dword_count; i++, data_buff++) {
++			DWC_WRITE_REG32(fifo, *data_buff);
++		}
++	}
++
++	ep->xfer_count += byte_count;
++	ep->xfer_buff += byte_count;
++	ep->dma_addr += byte_count;
++}
++
++/**
++ * Set the EP STALL.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to set the stall on.
++ */
++void dwc_otg_ep_set_stall(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	depctl_data_t depctl;
++	volatile uint32_t *depctl_addr;
++
++	DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num,
++		    (ep->is_in ? "IN" : "OUT"));
++
++	if (ep->is_in == 1) {
++		depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
++		depctl.d32 = DWC_READ_REG32(depctl_addr);
++
++		/* set the disable and stall bits */
++		if (depctl.b.epena) {
++			depctl.b.epdis = 1;
++		}
++		depctl.b.stall = 1;
++		DWC_WRITE_REG32(depctl_addr, depctl.d32);
++	} else {
++		depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
++		depctl.d32 = DWC_READ_REG32(depctl_addr);
++
++		/* set the stall bit */
++		depctl.b.stall = 1;
++		DWC_WRITE_REG32(depctl_addr, depctl.d32);
++	}
++
++	DWC_DEBUGPL(DBG_PCD, "DEPCTL=%0x\n", DWC_READ_REG32(depctl_addr));
++
++	return;
++}
++
++/**
++ * Clear the EP STALL.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to clear stall from.
++ */
++void dwc_otg_ep_clear_stall(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	depctl_data_t depctl;
++	volatile uint32_t *depctl_addr;
++
++	DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num,
++		    (ep->is_in ? "IN" : "OUT"));
++
++	if (ep->is_in == 1) {
++		depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
++	} else {
++		depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
++	}
++
++	depctl.d32 = DWC_READ_REG32(depctl_addr);
++
++	/* clear the stall bits */
++	depctl.b.stall = 0;
++
++	/*
++	 * USB Spec 9.4.5: For endpoints using data toggle, regardless
++	 * of whether an endpoint has the Halt feature set, a
++	 * ClearFeature(ENDPOINT_HALT) request always results in the
++	 * data toggle being reinitialized to DATA0.
++	 */
++	if (ep->type == DWC_OTG_EP_TYPE_INTR ||
++	    ep->type == DWC_OTG_EP_TYPE_BULK) {
++		depctl.b.setd0pid = 1;	/* DATA0 */
++	}
++
++	DWC_WRITE_REG32(depctl_addr, depctl.d32);
++	DWC_DEBUGPL(DBG_PCD, "DEPCTL=%0x\n", DWC_READ_REG32(depctl_addr));
++	return;
++}
++
++/**
++ * This function reads a packet from the Rx FIFO into the destination
++ * buffer. To read SETUP data use dwc_otg_read_setup_packet.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dest	  Destination buffer for the packet.
++ * @param bytes  Number of bytes to copy to the destination.
++ */
++void dwc_otg_read_packet(dwc_otg_core_if_t * core_if,
++			 uint8_t * dest, uint16_t bytes)
++{
++	int i;
++	int word_count = (bytes + 3) / 4;
++
++	volatile uint32_t *fifo = core_if->data_fifo[0];
++	uint32_t *data_buff = (uint32_t *) dest;
++
++	/**
++	 * @todo Account for the case where _dest is not dword aligned. This
++	 * requires reading data from the FIFO into a uint32_t temp buffer,
++	 * then moving it into the data buffer.
++	 */
++
++	DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__,
++		    core_if, dest, bytes);
++
++	for (i = 0; i < word_count; i++, data_buff++) {
++		*data_buff = DWC_READ_REG32(fifo);
++	}
++
++	return;
++}
++
++/**
++ * This functions reads the device registers and prints them
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_dev_registers(dwc_otg_core_if_t * core_if)
++{
++	int i;
++	volatile uint32_t *addr;
++
++	DWC_PRINTF("Device Global Registers\n");
++	addr = &core_if->dev_if->dev_global_regs->dcfg;
++	DWC_PRINTF("DCFG		 @0x%08lX : 0x%08X\n",
++		   (unsigned long)addr, DWC_READ_REG32(addr));
++	addr = &core_if->dev_if->dev_global_regs->dctl;
++	DWC_PRINTF("DCTL		 @0x%08lX : 0x%08X\n",
++		   (unsigned long)addr, DWC_READ_REG32(addr));
++	addr = &core_if->dev_if->dev_global_regs->dsts;
++	DWC_PRINTF("DSTS		 @0x%08lX : 0x%08X\n",
++		   (unsigned long)addr, DWC_READ_REG32(addr));
++	addr = &core_if->dev_if->dev_global_regs->diepmsk;
++	DWC_PRINTF("DIEPMSK	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->dev_if->dev_global_regs->doepmsk;
++	DWC_PRINTF("DOEPMSK	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->dev_if->dev_global_regs->daint;
++	DWC_PRINTF("DAINT	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->dev_if->dev_global_regs->daintmsk;
++	DWC_PRINTF("DAINTMSK	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->dev_if->dev_global_regs->dtknqr1;
++	DWC_PRINTF("DTKNQR1	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	if (core_if->hwcfg2.b.dev_token_q_depth > 6) {
++		addr = &core_if->dev_if->dev_global_regs->dtknqr2;
++		DWC_PRINTF("DTKNQR2	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++	}
++
++	addr = &core_if->dev_if->dev_global_regs->dvbusdis;
++	DWC_PRINTF("DVBUSID	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++
++	addr = &core_if->dev_if->dev_global_regs->dvbuspulse;
++	DWC_PRINTF("DVBUSPULSE	@0x%08lX : 0x%08X\n",
++		   (unsigned long)addr, DWC_READ_REG32(addr));
++
++	addr = &core_if->dev_if->dev_global_regs->dtknqr3_dthrctl;
++	DWC_PRINTF("DTKNQR3_DTHRCTL	 @0x%08lX : 0x%08X\n",
++		   (unsigned long)addr, DWC_READ_REG32(addr));
++
++	if (core_if->hwcfg2.b.dev_token_q_depth > 22) {
++		addr = &core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
++		DWC_PRINTF("DTKNQR4	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++	}
++
++	addr = &core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
++	DWC_PRINTF("FIFOEMPMSK	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++
++	if (core_if->hwcfg2.b.multi_proc_int) {
++
++		addr = &core_if->dev_if->dev_global_regs->deachint;
++		DWC_PRINTF("DEACHINT	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->dev_if->dev_global_regs->deachintmsk;
++		DWC_PRINTF("DEACHINTMSK	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++
++		for (i = 0; i <= core_if->dev_if->num_in_eps; i++) {
++			addr =
++			    &core_if->dev_if->
++			    dev_global_regs->diepeachintmsk[i];
++			DWC_PRINTF("DIEPEACHINTMSK[%d]	 @0x%08lX : 0x%08X\n",
++				   i, (unsigned long)addr,
++				   DWC_READ_REG32(addr));
++		}
++
++		for (i = 0; i <= core_if->dev_if->num_out_eps; i++) {
++			addr =
++			    &core_if->dev_if->
++			    dev_global_regs->doepeachintmsk[i];
++			DWC_PRINTF("DOEPEACHINTMSK[%d]	 @0x%08lX : 0x%08X\n",
++				   i, (unsigned long)addr,
++				   DWC_READ_REG32(addr));
++		}
++	}
++
++	for (i = 0; i <= core_if->dev_if->num_in_eps; i++) {
++		DWC_PRINTF("Device IN EP %d Registers\n", i);
++		addr = &core_if->dev_if->in_ep_regs[i]->diepctl;
++		DWC_PRINTF("DIEPCTL	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->dev_if->in_ep_regs[i]->diepint;
++		DWC_PRINTF("DIEPINT	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->dev_if->in_ep_regs[i]->dieptsiz;
++		DWC_PRINTF("DIETSIZ	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->dev_if->in_ep_regs[i]->diepdma;
++		DWC_PRINTF("DIEPDMA	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->dev_if->in_ep_regs[i]->dtxfsts;
++		DWC_PRINTF("DTXFSTS	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->dev_if->in_ep_regs[i]->diepdmab;
++		DWC_PRINTF("DIEPDMAB	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, 0 /*DWC_READ_REG32(addr) */ );
++	}
++
++	for (i = 0; i <= core_if->dev_if->num_out_eps; i++) {
++		DWC_PRINTF("Device OUT EP %d Registers\n", i);
++		addr = &core_if->dev_if->out_ep_regs[i]->doepctl;
++		DWC_PRINTF("DOEPCTL	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->dev_if->out_ep_regs[i]->doepint;
++		DWC_PRINTF("DOEPINT	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->dev_if->out_ep_regs[i]->doeptsiz;
++		DWC_PRINTF("DOETSIZ	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->dev_if->out_ep_regs[i]->doepdma;
++		DWC_PRINTF("DOEPDMA	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		if (core_if->dma_enable) {	/* Don't access this register in SLAVE mode */
++			addr = &core_if->dev_if->out_ep_regs[i]->doepdmab;
++			DWC_PRINTF("DOEPDMAB	 @0x%08lX : 0x%08X\n",
++				   (unsigned long)addr, DWC_READ_REG32(addr));
++		}
++
++	}
++}
++
++/**
++ * This functions reads the SPRAM and prints its content
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_spram(dwc_otg_core_if_t * core_if)
++{
++	volatile uint8_t *addr, *start_addr, *end_addr;
++
++	DWC_PRINTF("SPRAM Data:\n");
++	start_addr = (void *)core_if->core_global_regs;
++	DWC_PRINTF("Base Address: 0x%8lX\n", (unsigned long)start_addr);
++	start_addr += 0x00028000;
++	end_addr = (void *)core_if->core_global_regs;
++	end_addr += 0x000280e0;
++
++	for (addr = start_addr; addr < end_addr; addr += 16) {
++		DWC_PRINTF
++		    ("0x%8lX:\t%2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X\n",
++		     (unsigned long)addr, addr[0], addr[1], addr[2], addr[3],
++		     addr[4], addr[5], addr[6], addr[7], addr[8], addr[9],
++		     addr[10], addr[11], addr[12], addr[13], addr[14], addr[15]
++		    );
++	}
++
++	return;
++}
++
++/**
++ * This function reads the host registers and prints them
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_host_registers(dwc_otg_core_if_t * core_if)
++{
++	int i;
++	volatile uint32_t *addr;
++
++	DWC_PRINTF("Host Global Registers\n");
++	addr = &core_if->host_if->host_global_regs->hcfg;
++	DWC_PRINTF("HCFG		 @0x%08lX : 0x%08X\n",
++		   (unsigned long)addr, DWC_READ_REG32(addr));
++	addr = &core_if->host_if->host_global_regs->hfir;
++	DWC_PRINTF("HFIR		 @0x%08lX : 0x%08X\n",
++		   (unsigned long)addr, DWC_READ_REG32(addr));
++	addr = &core_if->host_if->host_global_regs->hfnum;
++	DWC_PRINTF("HFNUM	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->host_if->host_global_regs->hptxsts;
++	DWC_PRINTF("HPTXSTS	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->host_if->host_global_regs->haint;
++	DWC_PRINTF("HAINT	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->host_if->host_global_regs->haintmsk;
++	DWC_PRINTF("HAINTMSK	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	if (core_if->dma_desc_enable) {
++		addr = &core_if->host_if->host_global_regs->hflbaddr;
++		DWC_PRINTF("HFLBADDR	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++	}
++
++	addr = core_if->host_if->hprt0;
++	DWC_PRINTF("HPRT0	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++
++	for (i = 0; i < core_if->core_params->host_channels; i++) {
++		DWC_PRINTF("Host Channel %d Specific Registers\n", i);
++		addr = &core_if->host_if->hc_regs[i]->hcchar;
++		DWC_PRINTF("HCCHAR	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->host_if->hc_regs[i]->hcsplt;
++		DWC_PRINTF("HCSPLT	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->host_if->hc_regs[i]->hcint;
++		DWC_PRINTF("HCINT	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->host_if->hc_regs[i]->hcintmsk;
++		DWC_PRINTF("HCINTMSK	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->host_if->hc_regs[i]->hctsiz;
++		DWC_PRINTF("HCTSIZ	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->host_if->hc_regs[i]->hcdma;
++		DWC_PRINTF("HCDMA	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		if (core_if->dma_desc_enable) {
++			addr = &core_if->host_if->hc_regs[i]->hcdmab;
++			DWC_PRINTF("HCDMAB	 @0x%08lX : 0x%08X\n",
++				   (unsigned long)addr, DWC_READ_REG32(addr));
++		}
++
++	}
++	return;
++}
++
++/**
++ * This function reads the core global registers and prints them
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_global_registers(dwc_otg_core_if_t * core_if)
++{
++	int i, ep_num;
++	volatile uint32_t *addr;
++	char *txfsiz;
++
++	DWC_PRINTF("Core Global Registers\n");
++	addr = &core_if->core_global_regs->gotgctl;
++	DWC_PRINTF("GOTGCTL	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gotgint;
++	DWC_PRINTF("GOTGINT	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gahbcfg;
++	DWC_PRINTF("GAHBCFG	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gusbcfg;
++	DWC_PRINTF("GUSBCFG	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->grstctl;
++	DWC_PRINTF("GRSTCTL	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gintsts;
++	DWC_PRINTF("GINTSTS	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gintmsk;
++	DWC_PRINTF("GINTMSK	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->grxstsr;
++	DWC_PRINTF("GRXSTSR	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->grxfsiz;
++	DWC_PRINTF("GRXFSIZ	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gnptxfsiz;
++	DWC_PRINTF("GNPTXFSIZ @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gnptxsts;
++	DWC_PRINTF("GNPTXSTS	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gi2cctl;
++	DWC_PRINTF("GI2CCTL	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gpvndctl;
++	DWC_PRINTF("GPVNDCTL	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->ggpio;
++	DWC_PRINTF("GGPIO	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->guid;
++	DWC_PRINTF("GUID		 @0x%08lX : 0x%08X\n",
++		   (unsigned long)addr, DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gsnpsid;
++	DWC_PRINTF("GSNPSID	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->ghwcfg1;
++	DWC_PRINTF("GHWCFG1	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->ghwcfg2;
++	DWC_PRINTF("GHWCFG2	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->ghwcfg3;
++	DWC_PRINTF("GHWCFG3	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->ghwcfg4;
++	DWC_PRINTF("GHWCFG4	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->glpmcfg;
++	DWC_PRINTF("GLPMCFG	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gpwrdn;
++	DWC_PRINTF("GPWRDN	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gdfifocfg;
++	DWC_PRINTF("GDFIFOCFG	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->adpctl;
++	DWC_PRINTF("ADPCTL	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   dwc_otg_adp_read_reg(core_if));
++	addr = &core_if->core_global_regs->hptxfsiz;
++	DWC_PRINTF("HPTXFSIZ	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++
++	if (core_if->en_multiple_tx_fifo == 0) {
++		ep_num = core_if->hwcfg4.b.num_dev_perio_in_ep;
++		txfsiz = "DPTXFSIZ";
++	} else {
++		ep_num = core_if->hwcfg4.b.num_in_eps;
++		txfsiz = "DIENPTXF";
++	}
++	for (i = 0; i < ep_num; i++) {
++		addr = &core_if->core_global_regs->dtxfsiz[i];
++		DWC_PRINTF("%s[%d] @0x%08lX : 0x%08X\n", txfsiz, i + 1,
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++	}
++	addr = core_if->pcgcctl;
++	DWC_PRINTF("PCGCCTL	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++}
++
++/**
++ * Flush a Tx FIFO.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param num Tx FIFO to flush.
++ */
++void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t * core_if, const int num)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	volatile grstctl_t greset = {.d32 = 0 };
++	int count = 0;
++
++	DWC_DEBUGPL((DBG_CIL | DBG_PCDV), "Flush Tx FIFO %d\n", num);
++
++	greset.b.txfflsh = 1;
++	greset.b.txfnum = num;
++	DWC_WRITE_REG32(&global_regs->grstctl, greset.d32);
++
++	do {
++		greset.d32 = DWC_READ_REG32(&global_regs->grstctl);
++		if (++count > 10000) {
++			DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n",
++				 __func__, greset.d32,
++				 DWC_READ_REG32(&global_regs->gnptxsts));
++			break;
++		}
++		dwc_udelay(1);
++	} while (greset.b.txfflsh == 1);
++
++	/* Wait for 3 PHY Clocks */
++	dwc_udelay(1);
++}
++
++/**
++ * Flush Rx FIFO.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	volatile grstctl_t greset = {.d32 = 0 };
++	int count = 0;
++
++	DWC_DEBUGPL((DBG_CIL | DBG_PCDV), "%s\n", __func__);
++	/*
++	 *
++	 */
++	greset.b.rxfflsh = 1;
++	DWC_WRITE_REG32(&global_regs->grstctl, greset.d32);
++
++	do {
++		greset.d32 = DWC_READ_REG32(&global_regs->grstctl);
++		if (++count > 10000) {
++			DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__,
++				 greset.d32);
++			break;
++		}
++		dwc_udelay(1);
++	} while (greset.b.rxfflsh == 1);
++
++	/* Wait for 3 PHY Clocks */
++	dwc_udelay(1);
++}
++
++/**
++ * Do core a soft reset of the core.  Be careful with this because it
++ * resets all the internal state machines of the core.
++ */
++void dwc_otg_core_reset(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	volatile grstctl_t greset = {.d32 = 0 };
++	int count = 0;
++
++	DWC_DEBUGPL(DBG_CILV, "%s\n", __func__);
++	/* Wait for AHB master IDLE state. */
++	do {
++		dwc_udelay(10);
++		greset.d32 = DWC_READ_REG32(&global_regs->grstctl);
++		if (++count > 100000) {
++			DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x\n", __func__,
++				 greset.d32);
++			return;
++		}
++	}
++	while (greset.b.ahbidle == 0);
++
++	/* Core Soft Reset */
++	count = 0;
++	greset.b.csftrst = 1;
++	DWC_WRITE_REG32(&global_regs->grstctl, greset.d32);
++	do {
++		greset.d32 = DWC_READ_REG32(&global_regs->grstctl);
++		if (++count > 10000) {
++			DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n",
++				 __func__, greset.d32);
++			break;
++		}
++		dwc_udelay(1);
++	}
++	while (greset.b.csftrst == 1);
++
++	/* Wait for 3 PHY Clocks */
++	dwc_mdelay(100);
++}
++
++uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t * _core_if)
++{
++	return (dwc_otg_mode(_core_if) != DWC_HOST_MODE);
++}
++
++uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t * _core_if)
++{
++	return (dwc_otg_mode(_core_if) == DWC_HOST_MODE);
++}
++
++/**
++ * Register HCD callbacks. The callbacks are used to start and stop
++ * the HCD for interrupt processing.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param cb the HCD callback structure.
++ * @param p pointer to be passed to callback function (usb_hcd*).
++ */
++void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t * core_if,
++					dwc_otg_cil_callbacks_t * cb, void *p)
++{
++	core_if->hcd_cb = cb;
++	cb->p = p;
++}
++
++/**
++ * Register PCD callbacks. The callbacks are used to start and stop
++ * the PCD for interrupt processing.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param cb the PCD callback structure.
++ * @param p pointer to be passed to callback function (pcd*).
++ */
++void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t * core_if,
++					dwc_otg_cil_callbacks_t * cb, void *p)
++{
++	core_if->pcd_cb = cb;
++	cb->p = p;
++}
++
++#ifdef DWC_EN_ISOC
++
++/**
++ * This function writes isoc data per 1 (micro)frame into tx fifo
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++void write_isoc_frame_data(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	dwc_otg_dev_in_ep_regs_t *ep_regs;
++	dtxfsts_data_t txstatus = {.d32 = 0 };
++	uint32_t len = 0;
++	uint32_t dwords;
++
++	ep->xfer_len = ep->data_per_frame;
++	ep->xfer_count = 0;
++
++	ep_regs = core_if->dev_if->in_ep_regs[ep->num];
++
++	len = ep->xfer_len - ep->xfer_count;
++
++	if (len > ep->maxpacket) {
++		len = ep->maxpacket;
++	}
++
++	dwords = (len + 3) / 4;
++
++	/* While there is space in the queue and space in the FIFO and
++	 * More data to tranfer, Write packets to the Tx FIFO */
++	txstatus.d32 =
++	    DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts);
++	DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", ep->num, txstatus.d32);
++
++	while (txstatus.b.txfspcavail > dwords &&
++	       ep->xfer_count < ep->xfer_len && ep->xfer_len != 0) {
++		/* Write the FIFO */
++		dwc_otg_ep_write_packet(core_if, ep, 0);
++
++		len = ep->xfer_len - ep->xfer_count;
++		if (len > ep->maxpacket) {
++			len = ep->maxpacket;
++		}
++
++		dwords = (len + 3) / 4;
++		txstatus.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
++				   dtxfsts);
++		DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", ep->num,
++			    txstatus.d32);
++	}
++}
++
++/**
++ * This function initializes a descriptor chain for Isochronous transfer
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t * core_if,
++				       dwc_ep_t * ep)
++{
++	deptsiz_data_t deptsiz = {.d32 = 0 };
++	depctl_data_t depctl = {.d32 = 0 };
++	dsts_data_t dsts = {.d32 = 0 };
++	volatile uint32_t *addr;
++
++	if (ep->is_in) {
++		addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
++	} else {
++		addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
++	}
++
++	ep->xfer_len = ep->data_per_frame;
++	ep->xfer_count = 0;
++	ep->xfer_buff = ep->cur_pkt_addr;
++	ep->dma_addr = ep->cur_pkt_dma_addr;
++
++	if (ep->is_in) {
++		/* Program the transfer size and packet count
++		 *      as follows: xfersize = N * maxpacket +
++		 *      short_packet pktcnt = N + (short_packet
++		 *      exist ? 1 : 0)
++		 */
++		deptsiz.b.xfersize = ep->xfer_len;
++		deptsiz.b.pktcnt =
++		    (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket;
++		deptsiz.b.mc = deptsiz.b.pktcnt;
++		DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz,
++				deptsiz.d32);
++
++		/* Write the DMA register */
++		if (core_if->dma_enable) {
++			DWC_WRITE_REG32(&
++					(core_if->dev_if->in_ep_regs[ep->num]->
++					 diepdma), (uint32_t) ep->dma_addr);
++		}
++	} else {
++		deptsiz.b.pktcnt =
++		    (ep->xfer_len + (ep->maxpacket - 1)) / ep->maxpacket;
++		deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
++
++		DWC_WRITE_REG32(&core_if->dev_if->
++				out_ep_regs[ep->num]->doeptsiz, deptsiz.d32);
++
++		if (core_if->dma_enable) {
++			DWC_WRITE_REG32(&
++					(core_if->dev_if->
++					 out_ep_regs[ep->num]->doepdma),
++					(uint32_t) ep->dma_addr);
++		}
++	}
++
++	/** Enable endpoint, clear nak  */
++
++	depctl.d32 = 0;
++	if (ep->bInterval == 1) {
++		dsts.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
++		ep->next_frame = dsts.b.soffn + ep->bInterval;
++
++		if (ep->next_frame & 0x1) {
++			depctl.b.setd1pid = 1;
++		} else {
++			depctl.b.setd0pid = 1;
++		}
++	} else {
++		ep->next_frame += ep->bInterval;
++
++		if (ep->next_frame & 0x1) {
++			depctl.b.setd1pid = 1;
++		} else {
++			depctl.b.setd0pid = 1;
++		}
++	}
++	depctl.b.epena = 1;
++	depctl.b.cnak = 1;
++
++	DWC_MODIFY_REG32(addr, 0, depctl.d32);
++	depctl.d32 = DWC_READ_REG32(addr);
++
++	if (ep->is_in && core_if->dma_enable == 0) {
++		write_isoc_frame_data(core_if, ep);
++	}
++
++}
++#endif /* DWC_EN_ISOC */
++
++static void dwc_otg_set_uninitialized(int32_t * p, int size)
++{
++	int i;
++	for (i = 0; i < size; i++) {
++		p[i] = -1;
++	}
++}
++
++static int dwc_otg_param_initialized(int32_t val)
++{
++	return val != -1;
++}
++
++static int dwc_otg_setup_params(dwc_otg_core_if_t * core_if)
++{
++	int i;
++	core_if->core_params = DWC_ALLOC(sizeof(*core_if->core_params));
++	if (!core_if->core_params) {
++		return -DWC_E_NO_MEMORY;
++	}
++	dwc_otg_set_uninitialized((int32_t *) core_if->core_params,
++				  sizeof(*core_if->core_params) /
++				  sizeof(int32_t));
++	DWC_PRINTF("Setting default values for core params\n");
++	dwc_otg_set_param_otg_cap(core_if, dwc_param_otg_cap_default);
++	dwc_otg_set_param_dma_enable(core_if, dwc_param_dma_enable_default);
++	dwc_otg_set_param_dma_desc_enable(core_if,
++					  dwc_param_dma_desc_enable_default);
++	dwc_otg_set_param_opt(core_if, dwc_param_opt_default);
++	dwc_otg_set_param_dma_burst_size(core_if,
++					 dwc_param_dma_burst_size_default);
++	dwc_otg_set_param_host_support_fs_ls_low_power(core_if,
++						       dwc_param_host_support_fs_ls_low_power_default);
++	dwc_otg_set_param_enable_dynamic_fifo(core_if,
++					      dwc_param_enable_dynamic_fifo_default);
++	dwc_otg_set_param_data_fifo_size(core_if,
++					 dwc_param_data_fifo_size_default);
++	dwc_otg_set_param_dev_rx_fifo_size(core_if,
++					   dwc_param_dev_rx_fifo_size_default);
++	dwc_otg_set_param_dev_nperio_tx_fifo_size(core_if,
++						  dwc_param_dev_nperio_tx_fifo_size_default);
++	dwc_otg_set_param_host_rx_fifo_size(core_if,
++					    dwc_param_host_rx_fifo_size_default);
++	dwc_otg_set_param_host_nperio_tx_fifo_size(core_if,
++						   dwc_param_host_nperio_tx_fifo_size_default);
++	dwc_otg_set_param_host_perio_tx_fifo_size(core_if,
++						  dwc_param_host_perio_tx_fifo_size_default);
++	dwc_otg_set_param_max_transfer_size(core_if,
++					    dwc_param_max_transfer_size_default);
++	dwc_otg_set_param_max_packet_count(core_if,
++					   dwc_param_max_packet_count_default);
++	dwc_otg_set_param_host_channels(core_if,
++					dwc_param_host_channels_default);
++	dwc_otg_set_param_dev_endpoints(core_if,
++					dwc_param_dev_endpoints_default);
++	dwc_otg_set_param_phy_type(core_if, dwc_param_phy_type_default);
++	dwc_otg_set_param_speed(core_if, dwc_param_speed_default);
++	dwc_otg_set_param_host_ls_low_power_phy_clk(core_if,
++						    dwc_param_host_ls_low_power_phy_clk_default);
++	dwc_otg_set_param_phy_ulpi_ddr(core_if, dwc_param_phy_ulpi_ddr_default);
++	dwc_otg_set_param_phy_ulpi_ext_vbus(core_if,
++					    dwc_param_phy_ulpi_ext_vbus_default);
++	dwc_otg_set_param_phy_utmi_width(core_if,
++					 dwc_param_phy_utmi_width_default);
++	dwc_otg_set_param_ts_dline(core_if, dwc_param_ts_dline_default);
++	dwc_otg_set_param_i2c_enable(core_if, dwc_param_i2c_enable_default);
++	dwc_otg_set_param_ulpi_fs_ls(core_if, dwc_param_ulpi_fs_ls_default);
++	dwc_otg_set_param_en_multiple_tx_fifo(core_if,
++					      dwc_param_en_multiple_tx_fifo_default);
++	for (i = 0; i < 15; i++) {
++		dwc_otg_set_param_dev_perio_tx_fifo_size(core_if,
++							 dwc_param_dev_perio_tx_fifo_size_default,
++							 i);
++	}
++
++	for (i = 0; i < 15; i++) {
++		dwc_otg_set_param_dev_tx_fifo_size(core_if,
++						   dwc_param_dev_tx_fifo_size_default,
++						   i);
++	}
++	dwc_otg_set_param_thr_ctl(core_if, dwc_param_thr_ctl_default);
++	dwc_otg_set_param_mpi_enable(core_if, dwc_param_mpi_enable_default);
++	dwc_otg_set_param_pti_enable(core_if, dwc_param_pti_enable_default);
++	dwc_otg_set_param_lpm_enable(core_if, dwc_param_lpm_enable_default);
++	dwc_otg_set_param_ic_usb_cap(core_if, dwc_param_ic_usb_cap_default);
++	dwc_otg_set_param_tx_thr_length(core_if,
++					dwc_param_tx_thr_length_default);
++	dwc_otg_set_param_rx_thr_length(core_if,
++					dwc_param_rx_thr_length_default);
++	dwc_otg_set_param_ahb_thr_ratio(core_if,
++					dwc_param_ahb_thr_ratio_default);
++	dwc_otg_set_param_power_down(core_if, dwc_param_power_down_default);
++	dwc_otg_set_param_reload_ctl(core_if, dwc_param_reload_ctl_default);
++	dwc_otg_set_param_dev_out_nak(core_if, dwc_param_dev_out_nak_default);
++	dwc_otg_set_param_cont_on_bna(core_if, dwc_param_cont_on_bna_default);
++	dwc_otg_set_param_ahb_single(core_if, dwc_param_ahb_single_default);
++	dwc_otg_set_param_otg_ver(core_if, dwc_param_otg_ver_default);
++	dwc_otg_set_param_adp_enable(core_if, dwc_param_adp_enable_default);
++	DWC_PRINTF("Finished setting default values for core params\n");
++
++	return 0;
++}
++
++uint8_t dwc_otg_is_dma_enable(dwc_otg_core_if_t * core_if)
++{
++	return core_if->dma_enable;
++}
++
++/* Checks if the parameter is outside of its valid range of values */
++#define DWC_OTG_PARAM_TEST(_param_, _low_, _high_) \
++		(((_param_) < (_low_)) || \
++		((_param_) > (_high_)))
++
++/* Parameter access functions */
++int dwc_otg_set_param_otg_cap(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int valid;
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 2)) {
++		DWC_WARN("Wrong value for otg_cap parameter\n");
++		DWC_WARN("otg_cap parameter must be 0,1 or 2\n");
++		retval = -DWC_E_INVALID;
++		goto out;
++	}
++
++	valid = 1;
++	switch (val) {
++	case DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE:
++		if (core_if->hwcfg2.b.op_mode !=
++		    DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG)
++			valid = 0;
++		break;
++	case DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE:
++		if ((core_if->hwcfg2.b.op_mode !=
++		     DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG)
++		    && (core_if->hwcfg2.b.op_mode !=
++			DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG)
++		    && (core_if->hwcfg2.b.op_mode !=
++			DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE)
++		    && (core_if->hwcfg2.b.op_mode !=
++			DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) {
++			valid = 0;
++		}
++		break;
++	case DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE:
++		/* always valid */
++		break;
++	}
++	if (!valid) {
++		if (dwc_otg_param_initialized(core_if->core_params->otg_cap)) {
++			DWC_ERROR
++			    ("%d invalid for otg_cap paremter. Check HW configuration.\n",
++			     val);
++		}
++		val =
++		    (((core_if->hwcfg2.b.op_mode ==
++		       DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG)
++		      || (core_if->hwcfg2.b.op_mode ==
++			  DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG)
++		      || (core_if->hwcfg2.b.op_mode ==
++			  DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE)
++		      || (core_if->hwcfg2.b.op_mode ==
++			  DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) ?
++		     DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE :
++		     DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->otg_cap = val;
++out:
++	return retval;
++}
++
++int32_t dwc_otg_get_param_otg_cap(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->otg_cap;
++}
++
++int dwc_otg_set_param_opt(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong value for opt parameter\n");
++		return -DWC_E_INVALID;
++	}
++	core_if->core_params->opt = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_opt(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->opt;
++}
++
++int dwc_otg_set_param_dma_enable(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong value for dma enable\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val == 1) && (core_if->hwcfg2.b.architecture == 0)) {
++		if (dwc_otg_param_initialized(core_if->core_params->dma_enable)) {
++			DWC_ERROR
++			    ("%d invalid for dma_enable paremter. Check HW configuration.\n",
++			     val);
++		}
++		val = 0;
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->dma_enable = val;
++	if (val == 0) {
++		dwc_otg_set_param_dma_desc_enable(core_if, 0);
++	}
++	return retval;
++}
++
++int32_t dwc_otg_get_param_dma_enable(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->dma_enable;
++}
++
++int dwc_otg_set_param_dma_desc_enable(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong value for dma_enable\n");
++		DWC_WARN("dma_desc_enable must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val == 1)
++	    && ((dwc_otg_get_param_dma_enable(core_if) == 0)
++		|| (core_if->hwcfg4.b.desc_dma == 0))) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->dma_desc_enable)) {
++			DWC_ERROR
++			    ("%d invalid for dma_desc_enable paremter. Check HW configuration.\n",
++			     val);
++		}
++		val = 0;
++		retval = -DWC_E_INVALID;
++	}
++	core_if->core_params->dma_desc_enable = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_dma_desc_enable(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->dma_desc_enable;
++}
++
++int dwc_otg_set_param_host_support_fs_ls_low_power(dwc_otg_core_if_t * core_if,
++						   int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong value for host_support_fs_low_power\n");
++		DWC_WARN("host_support_fs_low_power must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++	core_if->core_params->host_support_fs_ls_low_power = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_host_support_fs_ls_low_power(dwc_otg_core_if_t *
++						       core_if)
++{
++	return core_if->core_params->host_support_fs_ls_low_power;
++}
++
++int dwc_otg_set_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if,
++					  int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong value for enable_dynamic_fifo\n");
++		DWC_WARN("enable_dynamic_fifo must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val == 1) && (core_if->hwcfg2.b.dynamic_fifo == 0)) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->enable_dynamic_fifo)) {
++			DWC_ERROR
++			    ("%d invalid for enable_dynamic_fifo paremter. Check HW configuration.\n",
++			     val);
++		}
++		val = 0;
++		retval = -DWC_E_INVALID;
++	}
++	core_if->core_params->enable_dynamic_fifo = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->enable_dynamic_fifo;
++}
++
++int dwc_otg_set_param_data_fifo_size(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 32, 32768)) {
++		DWC_WARN("Wrong value for data_fifo_size\n");
++		DWC_WARN("data_fifo_size must be 32-32768\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val > core_if->hwcfg3.b.dfifo_depth) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->data_fifo_size)) {
++			DWC_ERROR
++			    ("%d invalid for data_fifo_size parameter. Check HW configuration.\n",
++			     val);
++		}
++		val = core_if->hwcfg3.b.dfifo_depth;
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->data_fifo_size = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_data_fifo_size(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->data_fifo_size;
++}
++
++int dwc_otg_set_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 16, 32768)) {
++		DWC_WARN("Wrong value for dev_rx_fifo_size\n");
++		DWC_WARN("dev_rx_fifo_size must be 16-32768\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val > DWC_READ_REG32(&core_if->core_global_regs->grxfsiz)) {
++		if (dwc_otg_param_initialized(core_if->core_params->dev_rx_fifo_size)) {
++		DWC_WARN("%d invalid for dev_rx_fifo_size parameter\n", val);
++		}
++		val = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz);
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->dev_rx_fifo_size = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->dev_rx_fifo_size;
++}
++
++int dwc_otg_set_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if,
++					      int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 16, 32768)) {
++		DWC_WARN("Wrong value for dev_nperio_tx_fifo\n");
++		DWC_WARN("dev_nperio_tx_fifo must be 16-32768\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val > (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> 16)) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->dev_nperio_tx_fifo_size)) {
++			DWC_ERROR
++			    ("%d invalid for dev_nperio_tx_fifo_size. Check HW configuration.\n",
++			     val);
++		}
++		val =
++		    (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >>
++		     16);
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->dev_nperio_tx_fifo_size = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->dev_nperio_tx_fifo_size;
++}
++
++int dwc_otg_set_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if,
++					int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 16, 32768)) {
++		DWC_WARN("Wrong value for host_rx_fifo_size\n");
++		DWC_WARN("host_rx_fifo_size must be 16-32768\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val > DWC_READ_REG32(&core_if->core_global_regs->grxfsiz)) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->host_rx_fifo_size)) {
++			DWC_ERROR
++			    ("%d invalid for host_rx_fifo_size. Check HW configuration.\n",
++			     val);
++		}
++		val = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz);
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->host_rx_fifo_size = val;
++	return retval;
++
++}
++
++int32_t dwc_otg_get_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->host_rx_fifo_size;
++}
++
++int dwc_otg_set_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if,
++					       int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 16, 32768)) {
++		DWC_WARN("Wrong value for host_nperio_tx_fifo_size\n");
++		DWC_WARN("host_nperio_tx_fifo_size must be 16-32768\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val > (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> 16)) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->host_nperio_tx_fifo_size)) {
++			DWC_ERROR
++			    ("%d invalid for host_nperio_tx_fifo_size. Check HW configuration.\n",
++			     val);
++		}
++		val =
++		    (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >>
++		     16);
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->host_nperio_tx_fifo_size = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->host_nperio_tx_fifo_size;
++}
++
++int dwc_otg_set_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * core_if,
++					      int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 16, 32768)) {
++		DWC_WARN("Wrong value for host_perio_tx_fifo_size\n");
++		DWC_WARN("host_perio_tx_fifo_size must be 16-32768\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val > ((core_if->hptxfsiz.d32) >> 16)) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->host_perio_tx_fifo_size)) {
++			DWC_ERROR
++			    ("%d invalid for host_perio_tx_fifo_size. Check HW configuration.\n",
++			     val);
++		}
++		val = (core_if->hptxfsiz.d32) >> 16;
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->host_perio_tx_fifo_size = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->host_perio_tx_fifo_size;
++}
++
++int dwc_otg_set_param_max_transfer_size(dwc_otg_core_if_t * core_if,
++					int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 2047, 524288)) {
++		DWC_WARN("Wrong value for max_transfer_size\n");
++		DWC_WARN("max_transfer_size must be 2047-524288\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val >= (1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11))) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->max_transfer_size)) {
++			DWC_ERROR
++			    ("%d invalid for max_transfer_size. Check HW configuration.\n",
++			     val);
++		}
++		val =
++		    ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 11)) -
++		     1);
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->max_transfer_size = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_max_transfer_size(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->max_transfer_size;
++}
++
++int dwc_otg_set_param_max_packet_count(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 15, 511)) {
++		DWC_WARN("Wrong value for max_packet_count\n");
++		DWC_WARN("max_packet_count must be 15-511\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val > (1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4))) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->max_packet_count)) {
++			DWC_ERROR
++			    ("%d invalid for max_packet_count. Check HW configuration.\n",
++			     val);
++		}
++		val =
++		    ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1);
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->max_packet_count = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_max_packet_count(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->max_packet_count;
++}
++
++int dwc_otg_set_param_host_channels(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 1, 16)) {
++		DWC_WARN("Wrong value for host_channels\n");
++		DWC_WARN("host_channels must be 1-16\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val > (core_if->hwcfg2.b.num_host_chan + 1)) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->host_channels)) {
++			DWC_ERROR
++			    ("%d invalid for host_channels. Check HW configurations.\n",
++			     val);
++		}
++		val = (core_if->hwcfg2.b.num_host_chan + 1);
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->host_channels = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_host_channels(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->host_channels;
++}
++
++int dwc_otg_set_param_dev_endpoints(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 1, 15)) {
++		DWC_WARN("Wrong value for dev_endpoints\n");
++		DWC_WARN("dev_endpoints must be 1-15\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val > (core_if->hwcfg2.b.num_dev_ep)) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->dev_endpoints)) {
++			DWC_ERROR
++			    ("%d invalid for dev_endpoints. Check HW configurations.\n",
++			     val);
++		}
++		val = core_if->hwcfg2.b.num_dev_ep;
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->dev_endpoints = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_dev_endpoints(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->dev_endpoints;
++}
++
++int dwc_otg_set_param_phy_type(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	int valid = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 2)) {
++		DWC_WARN("Wrong value for phy_type\n");
++		DWC_WARN("phy_type must be 0,1 or 2\n");
++		return -DWC_E_INVALID;
++	}
++#ifndef NO_FS_PHY_HW_CHECKS
++	if ((val == DWC_PHY_TYPE_PARAM_UTMI) &&
++	    ((core_if->hwcfg2.b.hs_phy_type == 1) ||
++	     (core_if->hwcfg2.b.hs_phy_type == 3))) {
++		valid = 1;
++	} else if ((val == DWC_PHY_TYPE_PARAM_ULPI) &&
++		   ((core_if->hwcfg2.b.hs_phy_type == 2) ||
++		    (core_if->hwcfg2.b.hs_phy_type == 3))) {
++		valid = 1;
++	} else if ((val == DWC_PHY_TYPE_PARAM_FS) &&
++		   (core_if->hwcfg2.b.fs_phy_type == 1)) {
++		valid = 1;
++	}
++	if (!valid) {
++		if (dwc_otg_param_initialized(core_if->core_params->phy_type)) {
++			DWC_ERROR
++			    ("%d invalid for phy_type. Check HW configurations.\n",
++			     val);
++		}
++		if (core_if->hwcfg2.b.hs_phy_type) {
++			if ((core_if->hwcfg2.b.hs_phy_type == 3) ||
++			    (core_if->hwcfg2.b.hs_phy_type == 1)) {
++				val = DWC_PHY_TYPE_PARAM_UTMI;
++			} else {
++				val = DWC_PHY_TYPE_PARAM_ULPI;
++			}
++		}
++		retval = -DWC_E_INVALID;
++	}
++#endif
++	core_if->core_params->phy_type = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_phy_type(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->phy_type;
++}
++
++int dwc_otg_set_param_speed(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong value for speed parameter\n");
++		DWC_WARN("max_speed parameter must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++	if ((val == 0)
++	    && dwc_otg_get_param_phy_type(core_if) == DWC_PHY_TYPE_PARAM_FS) {
++		if (dwc_otg_param_initialized(core_if->core_params->speed)) {
++			DWC_ERROR
++			    ("%d invalid for speed paremter. Check HW configuration.\n",
++			     val);
++		}
++		val =
++		    (dwc_otg_get_param_phy_type(core_if) ==
++		     DWC_PHY_TYPE_PARAM_FS ? 1 : 0);
++		retval = -DWC_E_INVALID;
++	}
++	core_if->core_params->speed = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_speed(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->speed;
++}
++
++int dwc_otg_set_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * core_if,
++						int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN
++		    ("Wrong value for host_ls_low_power_phy_clk parameter\n");
++		DWC_WARN("host_ls_low_power_phy_clk must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val == DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ)
++	    && (dwc_otg_get_param_phy_type(core_if) == DWC_PHY_TYPE_PARAM_FS)) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->host_ls_low_power_phy_clk)) {
++			DWC_ERROR
++			    ("%d invalid for host_ls_low_power_phy_clk. Check HW configuration.\n",
++			     val);
++		}
++		val =
++		    (dwc_otg_get_param_phy_type(core_if) ==
++		     DWC_PHY_TYPE_PARAM_FS) ?
++		    DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ :
++		    DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ;
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->host_ls_low_power_phy_clk = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->host_ls_low_power_phy_clk;
++}
++
++int dwc_otg_set_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong value for phy_ulpi_ddr\n");
++		DWC_WARN("phy_upli_ddr must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	core_if->core_params->phy_ulpi_ddr = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->phy_ulpi_ddr;
++}
++
++int dwc_otg_set_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if,
++					int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong valaue for phy_ulpi_ext_vbus\n");
++		DWC_WARN("phy_ulpi_ext_vbus must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	core_if->core_params->phy_ulpi_ext_vbus = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->phy_ulpi_ext_vbus;
++}
++
++int dwc_otg_set_param_phy_utmi_width(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 8, 8) && DWC_OTG_PARAM_TEST(val, 16, 16)) {
++		DWC_WARN("Wrong valaue for phy_utmi_width\n");
++		DWC_WARN("phy_utmi_width must be 8 or 16\n");
++		return -DWC_E_INVALID;
++	}
++
++	core_if->core_params->phy_utmi_width = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_phy_utmi_width(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->phy_utmi_width;
++}
++
++int dwc_otg_set_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong valaue for ulpi_fs_ls\n");
++		DWC_WARN("ulpi_fs_ls must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	core_if->core_params->ulpi_fs_ls = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->ulpi_fs_ls;
++}
++
++int dwc_otg_set_param_ts_dline(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong valaue for ts_dline\n");
++		DWC_WARN("ts_dline must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	core_if->core_params->ts_dline = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_ts_dline(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->ts_dline;
++}
++
++int dwc_otg_set_param_i2c_enable(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong valaue for i2c_enable\n");
++		DWC_WARN("i2c_enable must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++#ifndef NO_FS_PHY_HW_CHECK
++	if (val == 1 && core_if->hwcfg3.b.i2c == 0) {
++		if (dwc_otg_param_initialized(core_if->core_params->i2c_enable)) {
++			DWC_ERROR
++			    ("%d invalid for i2c_enable. Check HW configuration.\n",
++			     val);
++		}
++		val = 0;
++		retval = -DWC_E_INVALID;
++	}
++#endif
++
++	core_if->core_params->i2c_enable = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_i2c_enable(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->i2c_enable;
++}
++
++int dwc_otg_set_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if,
++					     int32_t val, int fifo_num)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 4, 768)) {
++		DWC_WARN("Wrong value for dev_perio_tx_fifo_size\n");
++		DWC_WARN("dev_perio_tx_fifo_size must be 4-768\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val >
++	    (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num]))) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->dev_perio_tx_fifo_size[fifo_num])) {
++			DWC_ERROR
++			    ("`%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n",
++			     val, fifo_num);
++		}
++		val = (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num]));
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->dev_perio_tx_fifo_size[fifo_num] = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if,
++						 int fifo_num)
++{
++	return core_if->core_params->dev_perio_tx_fifo_size[fifo_num];
++}
++
++int dwc_otg_set_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if,
++					  int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong valaue for en_multiple_tx_fifo,\n");
++		DWC_WARN("en_multiple_tx_fifo must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val == 1 && core_if->hwcfg4.b.ded_fifo_en == 0) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->en_multiple_tx_fifo)) {
++			DWC_ERROR
++			    ("%d invalid for parameter en_multiple_tx_fifo. Check HW configuration.\n",
++			     val);
++		}
++		val = 0;
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->en_multiple_tx_fifo = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->en_multiple_tx_fifo;
++}
++
++int dwc_otg_set_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, int32_t val,
++				       int fifo_num)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 4, 768)) {
++		DWC_WARN("Wrong value for dev_tx_fifo_size\n");
++		DWC_WARN("dev_tx_fifo_size must be 4-768\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val >
++	    (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num]))) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->dev_tx_fifo_size[fifo_num])) {
++			DWC_ERROR
++			    ("`%d' invalid for parameter `dev_tx_fifo_size_%d'. Check HW configuration.\n",
++			     val, fifo_num);
++		}
++		val = (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num]));
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->dev_tx_fifo_size[fifo_num] = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if,
++					   int fifo_num)
++{
++	return core_if->core_params->dev_tx_fifo_size[fifo_num];
++}
++
++int dwc_otg_set_param_thr_ctl(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 7)) {
++		DWC_WARN("Wrong value for thr_ctl\n");
++		DWC_WARN("thr_ctl must be 0-7\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val != 0) &&
++	    (!dwc_otg_get_param_dma_enable(core_if) ||
++	     !core_if->hwcfg4.b.ded_fifo_en)) {
++		if (dwc_otg_param_initialized(core_if->core_params->thr_ctl)) {
++			DWC_ERROR
++			    ("%d invalid for parameter thr_ctl. Check HW configuration.\n",
++			     val);
++		}
++		val = 0;
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->thr_ctl = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_thr_ctl(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->thr_ctl;
++}
++
++int dwc_otg_set_param_lpm_enable(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong value for lpm_enable\n");
++		DWC_WARN("lpm_enable must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val && !core_if->hwcfg3.b.otg_lpm_en) {
++		if (dwc_otg_param_initialized(core_if->core_params->lpm_enable)) {
++			DWC_ERROR
++			    ("%d invalid for parameter lpm_enable. Check HW configuration.\n",
++			     val);
++		}
++		val = 0;
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->lpm_enable = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_lpm_enable(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->lpm_enable;
++}
++
++int dwc_otg_set_param_tx_thr_length(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 8, 128)) {
++		DWC_WARN("Wrong valaue for tx_thr_length\n");
++		DWC_WARN("tx_thr_length must be 8 - 128\n");
++		return -DWC_E_INVALID;
++	}
++
++	core_if->core_params->tx_thr_length = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_tx_thr_length(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->tx_thr_length;
++}
++
++int dwc_otg_set_param_rx_thr_length(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 8, 128)) {
++		DWC_WARN("Wrong valaue for rx_thr_length\n");
++		DWC_WARN("rx_thr_length must be 8 - 128\n");
++		return -DWC_E_INVALID;
++	}
++
++	core_if->core_params->rx_thr_length = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_rx_thr_length(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->rx_thr_length;
++}
++
++int dwc_otg_set_param_dma_burst_size(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 1, 1) &&
++	    DWC_OTG_PARAM_TEST(val, 4, 4) &&
++	    DWC_OTG_PARAM_TEST(val, 8, 8) &&
++	    DWC_OTG_PARAM_TEST(val, 16, 16) &&
++	    DWC_OTG_PARAM_TEST(val, 32, 32) &&
++	    DWC_OTG_PARAM_TEST(val, 64, 64) &&
++	    DWC_OTG_PARAM_TEST(val, 128, 128) &&
++	    DWC_OTG_PARAM_TEST(val, 256, 256)) {
++		DWC_WARN("`%d' invalid for parameter `dma_burst_size'\n", val);
++		return -DWC_E_INVALID;
++	}
++	core_if->core_params->dma_burst_size = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_dma_burst_size(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->dma_burst_size;
++}
++
++int dwc_otg_set_param_pti_enable(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("`%d' invalid for parameter `pti_enable'\n", val);
++		return -DWC_E_INVALID;
++	}
++	if (val && (core_if->snpsid < OTG_CORE_REV_2_72a)) {
++		if (dwc_otg_param_initialized(core_if->core_params->pti_enable)) {
++			DWC_ERROR
++			    ("%d invalid for parameter pti_enable. Check HW configuration.\n",
++			     val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++	core_if->core_params->pti_enable = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_pti_enable(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->pti_enable;
++}
++
++int dwc_otg_set_param_mpi_enable(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("`%d' invalid for parameter `mpi_enable'\n", val);
++		return -DWC_E_INVALID;
++	}
++	if (val && (core_if->hwcfg2.b.multi_proc_int == 0)) {
++		if (dwc_otg_param_initialized(core_if->core_params->mpi_enable)) {
++			DWC_ERROR
++			    ("%d invalid for parameter mpi_enable. Check HW configuration.\n",
++			     val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++	core_if->core_params->mpi_enable = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_mpi_enable(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->mpi_enable;
++}
++
++int dwc_otg_set_param_adp_enable(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("`%d' invalid for parameter `adp_enable'\n", val);
++		return -DWC_E_INVALID;
++	}
++	if (val && (core_if->hwcfg3.b.adp_supp == 0)) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->adp_supp_enable)) {
++			DWC_ERROR
++			    ("%d invalid for parameter adp_enable. Check HW configuration.\n",
++			     val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++	core_if->core_params->adp_supp_enable = val;
++	/*Set OTG version 2.0 in case of enabling ADP*/
++	if (val)
++		dwc_otg_set_param_otg_ver(core_if, 1);
++
++	return retval;
++}
++
++int32_t dwc_otg_get_param_adp_enable(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->adp_supp_enable;
++}
++
++int dwc_otg_set_param_ic_usb_cap(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("`%d' invalid for parameter `ic_usb_cap'\n", val);
++		DWC_WARN("ic_usb_cap must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val && (core_if->hwcfg2.b.otg_enable_ic_usb == 0)) {
++		if (dwc_otg_param_initialized(core_if->core_params->ic_usb_cap)) {
++			DWC_ERROR
++			    ("%d invalid for parameter ic_usb_cap. Check HW configuration.\n",
++			     val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++	core_if->core_params->ic_usb_cap = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_ic_usb_cap(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->ic_usb_cap;
++}
++
++int dwc_otg_set_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	int valid = 1;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 3)) {
++		DWC_WARN("`%d' invalid for parameter `ahb_thr_ratio'\n", val);
++		DWC_WARN("ahb_thr_ratio must be 0 - 3\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val
++	    && (core_if->snpsid < OTG_CORE_REV_2_81a
++		|| !dwc_otg_get_param_thr_ctl(core_if))) {
++		valid = 0;
++	} else if (val
++		   && ((dwc_otg_get_param_tx_thr_length(core_if) / (1 << val)) <
++		       4)) {
++		valid = 0;
++	}
++	if (valid == 0) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->ahb_thr_ratio)) {
++			DWC_ERROR
++			    ("%d invalid for parameter ahb_thr_ratio. Check HW configuration.\n",
++			     val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++
++	core_if->core_params->ahb_thr_ratio = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->ahb_thr_ratio;
++}
++
++int dwc_otg_set_param_power_down(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	int valid = 1;
++	hwcfg4_data_t hwcfg4 = {.d32 = 0 };
++	hwcfg4.d32 = DWC_READ_REG32(&core_if->core_global_regs->ghwcfg4);
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 3)) {
++		DWC_WARN("`%d' invalid for parameter `power_down'\n", val);
++		DWC_WARN("power_down must be 0 - 2\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val == 2) && (core_if->snpsid < OTG_CORE_REV_2_91a)) {
++		valid = 0;
++	}
++	if ((val == 3)
++	    && ((core_if->snpsid < OTG_CORE_REV_3_00a)
++		|| (hwcfg4.b.xhiber == 0))) {
++		valid = 0;
++	}
++	if (valid == 0) {
++		if (dwc_otg_param_initialized(core_if->core_params->power_down)) {
++			DWC_ERROR
++			    ("%d invalid for parameter power_down. Check HW configuration.\n",
++			     val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++	core_if->core_params->power_down = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_power_down(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->power_down;
++}
++
++int dwc_otg_set_param_reload_ctl(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	int valid = 1;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("`%d' invalid for parameter `reload_ctl'\n", val);
++		DWC_WARN("reload_ctl must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val == 1) && (core_if->snpsid < OTG_CORE_REV_2_92a)) {
++		valid = 0;
++	}
++	if (valid == 0) {
++		if (dwc_otg_param_initialized(core_if->core_params->reload_ctl)) {
++			DWC_ERROR("%d invalid for parameter reload_ctl."
++				  "Check HW configuration.\n", val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++	core_if->core_params->reload_ctl = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_reload_ctl(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->reload_ctl;
++}
++
++int dwc_otg_set_param_dev_out_nak(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	int valid = 1;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("`%d' invalid for parameter `dev_out_nak'\n", val);
++		DWC_WARN("dev_out_nak must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val == 1) && ((core_if->snpsid < OTG_CORE_REV_2_93a) ||
++		!(core_if->core_params->dma_desc_enable))) {
++		valid = 0;
++	}
++	if (valid == 0) {
++		if (dwc_otg_param_initialized(core_if->core_params->dev_out_nak)) {
++			DWC_ERROR("%d invalid for parameter dev_out_nak."
++				"Check HW configuration.\n", val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++	core_if->core_params->dev_out_nak = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_dev_out_nak(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->dev_out_nak;
++}
++
++int dwc_otg_set_param_cont_on_bna(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	int valid = 1;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("`%d' invalid for parameter `cont_on_bna'\n", val);
++		DWC_WARN("cont_on_bna must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val == 1) && ((core_if->snpsid < OTG_CORE_REV_2_94a) ||
++		!(core_if->core_params->dma_desc_enable))) {
++			valid = 0;
++	}
++	if (valid == 0) {
++		if (dwc_otg_param_initialized(core_if->core_params->cont_on_bna)) {
++			DWC_ERROR("%d invalid for parameter cont_on_bna."
++				"Check HW configuration.\n", val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++	core_if->core_params->cont_on_bna = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_cont_on_bna(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->cont_on_bna;
++}
++
++int dwc_otg_set_param_ahb_single(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	int valid = 1;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("`%d' invalid for parameter `ahb_single'\n", val);
++		DWC_WARN("ahb_single must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val == 1) && (core_if->snpsid < OTG_CORE_REV_2_94a)) {
++			valid = 0;
++	}
++	if (valid == 0) {
++		if (dwc_otg_param_initialized(core_if->core_params->ahb_single)) {
++			DWC_ERROR("%d invalid for parameter ahb_single."
++				"Check HW configuration.\n", val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++	core_if->core_params->ahb_single = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_ahb_single(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->ahb_single;
++}
++
++int dwc_otg_set_param_otg_ver(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("`%d' invalid for parameter `otg_ver'\n", val);
++		DWC_WARN
++		    ("otg_ver must be 0(for OTG 1.3 support) or 1(for OTG 2.0 support)\n");
++		return -DWC_E_INVALID;
++	}
++
++	core_if->core_params->otg_ver = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_otg_ver(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->otg_ver;
++}
++
++uint32_t dwc_otg_get_hnpstatus(dwc_otg_core_if_t * core_if)
++{
++	gotgctl_data_t otgctl;
++	otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
++	return otgctl.b.hstnegscs;
++}
++
++uint32_t dwc_otg_get_srpstatus(dwc_otg_core_if_t * core_if)
++{
++	gotgctl_data_t otgctl;
++	otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
++	return otgctl.b.sesreqscs;
++}
++
++void dwc_otg_set_hnpreq(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	if(core_if->otg_ver == 0) {
++		gotgctl_data_t otgctl;
++		otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
++		otgctl.b.hnpreq = val;
++		DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, otgctl.d32);
++	} else {
++		core_if->otg_sts = val;
++	}
++}
++
++uint32_t dwc_otg_get_gsnpsid(dwc_otg_core_if_t * core_if)
++{
++	return core_if->snpsid;
++}
++
++uint32_t dwc_otg_get_mode(dwc_otg_core_if_t * core_if)
++{
++	gintsts_data_t gintsts;
++	gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++	return gintsts.b.curmode;
++}
++
++uint32_t dwc_otg_get_hnpcapable(dwc_otg_core_if_t * core_if)
++{
++	gusbcfg_data_t usbcfg;
++	usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++	return usbcfg.b.hnpcap;
++}
++
++void dwc_otg_set_hnpcapable(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	gusbcfg_data_t usbcfg;
++	usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++	usbcfg.b.hnpcap = val;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, usbcfg.d32);
++}
++
++uint32_t dwc_otg_get_srpcapable(dwc_otg_core_if_t * core_if)
++{
++	gusbcfg_data_t usbcfg;
++	usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++	return usbcfg.b.srpcap;
++}
++
++void dwc_otg_set_srpcapable(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	gusbcfg_data_t usbcfg;
++	usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++	usbcfg.b.srpcap = val;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, usbcfg.d32);
++}
++
++uint32_t dwc_otg_get_devspeed(dwc_otg_core_if_t * core_if)
++{
++	dcfg_data_t dcfg;
++	/* originally: dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); */
++
++        dcfg.d32 = -1; //GRAYG
++        DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)\n", __func__, core_if);
++        if (NULL == core_if)
++                DWC_ERROR("reg request with NULL core_if\n");
++        DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)->dev_if(%p)\n", __func__,
++                    core_if, core_if->dev_if);
++        if (NULL == core_if->dev_if)
++                DWC_ERROR("reg request with NULL dev_if\n");
++        DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)->dev_if(%p)->"
++                    "dev_global_regs(%p)\n", __func__,
++                    core_if, core_if->dev_if,
++                    core_if->dev_if->dev_global_regs);
++        if (NULL == core_if->dev_if->dev_global_regs)
++                DWC_ERROR("reg request with NULL dev_global_regs\n");
++        else {
++                DWC_DEBUGPL(DBG_CILV, "%s - &core_if(%p)->dev_if(%p)->"
++                            "dev_global_regs(%p)->dcfg = %p\n", __func__,
++                            core_if, core_if->dev_if,
++                            core_if->dev_if->dev_global_regs,
++                            &core_if->dev_if->dev_global_regs->dcfg);
++		dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
++        }
++	return dcfg.b.devspd;
++}
++
++void dwc_otg_set_devspeed(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	dcfg_data_t dcfg;
++	dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
++	dcfg.b.devspd = val;
++	DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32);
++}
++
++uint32_t dwc_otg_get_busconnected(dwc_otg_core_if_t * core_if)
++{
++	hprt0_data_t hprt0;
++	hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0);
++	return hprt0.b.prtconnsts;
++}
++
++uint32_t dwc_otg_get_enumspeed(dwc_otg_core_if_t * core_if)
++{
++	dsts_data_t dsts;
++	dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
++	return dsts.b.enumspd;
++}
++
++uint32_t dwc_otg_get_prtpower(dwc_otg_core_if_t * core_if)
++{
++	hprt0_data_t hprt0;
++	hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0);
++	return hprt0.b.prtpwr;
++
++}
++
++uint32_t dwc_otg_get_core_state(dwc_otg_core_if_t * core_if)
++{
++	return core_if->hibernation_suspend;
++}
++
++void dwc_otg_set_prtpower(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	hprt0_data_t hprt0;
++	hprt0.d32 = dwc_otg_read_hprt0(core_if);
++	hprt0.b.prtpwr = val;
++	DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++}
++
++uint32_t dwc_otg_get_prtsuspend(dwc_otg_core_if_t * core_if)
++{
++	hprt0_data_t hprt0;
++	hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0);
++	return hprt0.b.prtsusp;
++
++}
++
++void dwc_otg_set_prtsuspend(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	hprt0_data_t hprt0;
++	hprt0.d32 = dwc_otg_read_hprt0(core_if);
++	hprt0.b.prtsusp = val;
++	DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++}
++
++uint32_t dwc_otg_get_fr_interval(dwc_otg_core_if_t * core_if)
++{
++	hfir_data_t hfir;
++	hfir.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir);
++	return hfir.b.frint;
++
++}
++
++void dwc_otg_set_fr_interval(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	hfir_data_t hfir;
++	uint32_t fram_int;
++	fram_int = calc_frame_interval(core_if);
++	hfir.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir);
++	if (!core_if->core_params->reload_ctl) {
++		DWC_WARN("\nCannot reload HFIR register.HFIR.HFIRRldCtrl bit is"
++			 "not set to 1.\nShould load driver with reload_ctl=1"
++			 " module parameter\n");
++		return;
++	}
++	switch (fram_int) {
++	case 3750:
++		if ((val < 3350) || (val > 4150)) {
++			DWC_WARN("HFIR interval for HS core and 30 MHz"
++				 "clock freq should be from 3350 to 4150\n");
++			return;
++		}
++		break;
++	case 30000:
++		if ((val < 26820) || (val > 33180)) {
++			DWC_WARN("HFIR interval for FS/LS core and 30 MHz"
++				 "clock freq should be from 26820 to 33180\n");
++			return;
++		}
++		break;
++	case 6000:
++		if ((val < 5360) || (val > 6640)) {
++			DWC_WARN("HFIR interval for HS core and 48 MHz"
++				 "clock freq should be from 5360 to 6640\n");
++			return;
++		}
++		break;
++	case 48000:
++		if ((val < 42912) || (val > 53088)) {
++			DWC_WARN("HFIR interval for FS/LS core and 48 MHz"
++				 "clock freq should be from 42912 to 53088\n");
++			return;
++		}
++		break;
++	case 7500:
++		if ((val < 6700) || (val > 8300)) {
++			DWC_WARN("HFIR interval for HS core and 60 MHz"
++				 "clock freq should be from 6700 to 8300\n");
++			return;
++		}
++		break;
++	case 60000:
++		if ((val < 53640) || (val > 65536)) {
++			DWC_WARN("HFIR interval for FS/LS core and 60 MHz"
++				 "clock freq should be from 53640 to 65536\n");
++			return;
++		}
++		break;
++	default:
++		DWC_WARN("Unknown frame interval\n");
++		return;
++		break;
++
++	}
++	hfir.b.frint = val;
++	DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hfir, hfir.d32);
++}
++
++uint32_t dwc_otg_get_mode_ch_tim(dwc_otg_core_if_t * core_if)
++{
++	hcfg_data_t hcfg;
++	hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg);
++	return hcfg.b.modechtimen;
++
++}
++
++void dwc_otg_set_mode_ch_tim(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	hcfg_data_t hcfg;
++	hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg);
++	hcfg.b.modechtimen = val;
++	DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32);
++}
++
++void dwc_otg_set_prtresume(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	hprt0_data_t hprt0;
++	hprt0.d32 = dwc_otg_read_hprt0(core_if);
++	hprt0.b.prtres = val;
++	DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++}
++
++uint32_t dwc_otg_get_remotewakesig(dwc_otg_core_if_t * core_if)
++{
++	dctl_data_t dctl;
++	dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl);
++	return dctl.b.rmtwkupsig;
++}
++
++uint32_t dwc_otg_get_lpm_portsleepstatus(dwc_otg_core_if_t * core_if)
++{
++	glpmcfg_data_t lpmcfg;
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++
++	DWC_ASSERT(!
++		   ((core_if->lx_state == DWC_OTG_L1) ^ lpmcfg.b.prt_sleep_sts),
++		   "lx_state = %d, lmpcfg.prt_sleep_sts = %d\n",
++		   core_if->lx_state, lpmcfg.b.prt_sleep_sts);
++
++	return lpmcfg.b.prt_sleep_sts;
++}
++
++uint32_t dwc_otg_get_lpm_remotewakeenabled(dwc_otg_core_if_t * core_if)
++{
++	glpmcfg_data_t lpmcfg;
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	return lpmcfg.b.rem_wkup_en;
++}
++
++uint32_t dwc_otg_get_lpmresponse(dwc_otg_core_if_t * core_if)
++{
++	glpmcfg_data_t lpmcfg;
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	return lpmcfg.b.appl_resp;
++}
++
++void dwc_otg_set_lpmresponse(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	glpmcfg_data_t lpmcfg;
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	lpmcfg.b.appl_resp = val;
++	DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32);
++}
++
++uint32_t dwc_otg_get_hsic_connect(dwc_otg_core_if_t * core_if)
++{
++	glpmcfg_data_t lpmcfg;
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	return lpmcfg.b.hsic_connect;
++}
++
++void dwc_otg_set_hsic_connect(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	glpmcfg_data_t lpmcfg;
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	lpmcfg.b.hsic_connect = val;
++	DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32);
++}
++
++uint32_t dwc_otg_get_inv_sel_hsic(dwc_otg_core_if_t * core_if)
++{
++	glpmcfg_data_t lpmcfg;
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	return lpmcfg.b.inv_sel_hsic;
++
++}
++
++void dwc_otg_set_inv_sel_hsic(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	glpmcfg_data_t lpmcfg;
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	lpmcfg.b.inv_sel_hsic = val;
++	DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32);
++}
++
++uint32_t dwc_otg_get_gotgctl(dwc_otg_core_if_t * core_if)
++{
++	return DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
++}
++
++void dwc_otg_set_gotgctl(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, val);
++}
++
++uint32_t dwc_otg_get_gusbcfg(dwc_otg_core_if_t * core_if)
++{
++	return DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++}
++
++void dwc_otg_set_gusbcfg(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, val);
++}
++
++uint32_t dwc_otg_get_grxfsiz(dwc_otg_core_if_t * core_if)
++{
++	return DWC_READ_REG32(&core_if->core_global_regs->grxfsiz);
++}
++
++void dwc_otg_set_grxfsiz(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	DWC_WRITE_REG32(&core_if->core_global_regs->grxfsiz, val);
++}
++
++uint32_t dwc_otg_get_gnptxfsiz(dwc_otg_core_if_t * core_if)
++{
++	return DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz);
++}
++
++void dwc_otg_set_gnptxfsiz(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	DWC_WRITE_REG32(&core_if->core_global_regs->gnptxfsiz, val);
++}
++
++uint32_t dwc_otg_get_gpvndctl(dwc_otg_core_if_t * core_if)
++{
++	return DWC_READ_REG32(&core_if->core_global_regs->gpvndctl);
++}
++
++void dwc_otg_set_gpvndctl(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	DWC_WRITE_REG32(&core_if->core_global_regs->gpvndctl, val);
++}
++
++uint32_t dwc_otg_get_ggpio(dwc_otg_core_if_t * core_if)
++{
++	return DWC_READ_REG32(&core_if->core_global_regs->ggpio);
++}
++
++void dwc_otg_set_ggpio(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, val);
++}
++
++uint32_t dwc_otg_get_hprt0(dwc_otg_core_if_t * core_if)
++{
++	return DWC_READ_REG32(core_if->host_if->hprt0);
++
++}
++
++void dwc_otg_set_hprt0(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	DWC_WRITE_REG32(core_if->host_if->hprt0, val);
++}
++
++uint32_t dwc_otg_get_guid(dwc_otg_core_if_t * core_if)
++{
++	return DWC_READ_REG32(&core_if->core_global_regs->guid);
++}
++
++void dwc_otg_set_guid(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	DWC_WRITE_REG32(&core_if->core_global_regs->guid, val);
++}
++
++uint32_t dwc_otg_get_hptxfsiz(dwc_otg_core_if_t * core_if)
++{
++	return DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz);
++}
++
++uint16_t dwc_otg_get_otg_version(dwc_otg_core_if_t * core_if)
++{
++	return ((core_if->otg_ver == 1) ? (uint16_t)0x0200 : (uint16_t)0x0103);
++}
++
++/**
++ * Start the SRP timer to detect when the SRP does not complete within
++ * 6 seconds.
++ *
++ * @param core_if the pointer to core_if strucure.
++ */
++void dwc_otg_pcd_start_srp_timer(dwc_otg_core_if_t * core_if)
++{
++	core_if->srp_timer_started = 1;
++	DWC_TIMER_SCHEDULE(core_if->srp_timer, 6000 /* 6 secs */ );
++}
++
++void dwc_otg_initiate_srp(dwc_otg_core_if_t * core_if)
++{
++	uint32_t *addr = (uint32_t *) & (core_if->core_global_regs->gotgctl);
++	gotgctl_data_t mem;
++	gotgctl_data_t val;
++
++	val.d32 = DWC_READ_REG32(addr);
++	if (val.b.sesreq) {
++		DWC_ERROR("Session Request Already active!\n");
++		return;
++	}
++
++	DWC_INFO("Session Request Initated\n");	//NOTICE
++	mem.d32 = DWC_READ_REG32(addr);
++	mem.b.sesreq = 1;
++	DWC_WRITE_REG32(addr, mem.d32);
++
++	/* Start the SRP timer */
++	dwc_otg_pcd_start_srp_timer(core_if);
++	return;
++}
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_cil.h linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_cil.h
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_cil.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_cil.h	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,1464 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.h $
++ * $Revision: #123 $
++ * $Date: 2012/08/10 $
++ * $Change: 2047372 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_CIL_H__)
++#define __DWC_CIL_H__
++
++#include "dwc_list.h"
++#include "dwc_otg_dbg.h"
++#include "dwc_otg_regs.h"
++
++#include "dwc_otg_core_if.h"
++#include "dwc_otg_adp.h"
++
++/**
++ * @file
++ * This file contains the interface to the Core Interface Layer.
++ */
++
++#ifdef DWC_UTE_CFI
++
++#define MAX_DMA_DESCS_PER_EP	256
++
++/**
++ * Enumeration for the data buffer mode
++ */
++typedef enum _data_buffer_mode {
++	BM_STANDARD = 0,	/* data buffer is in normal mode */
++	BM_SG = 1,		/* data buffer uses the scatter/gather mode */
++	BM_CONCAT = 2,		/* data buffer uses the concatenation mode */
++	BM_CIRCULAR = 3,	/* data buffer uses the circular DMA mode */
++	BM_ALIGN = 4		/* data buffer is in buffer alignment mode */
++} data_buffer_mode_e;
++#endif //DWC_UTE_CFI
++
++/** Macros defined for DWC OTG HW Release version */
++
++#define OTG_CORE_REV_2_60a	0x4F54260A
++#define OTG_CORE_REV_2_71a	0x4F54271A
++#define OTG_CORE_REV_2_72a	0x4F54272A
++#define OTG_CORE_REV_2_80a	0x4F54280A
++#define OTG_CORE_REV_2_81a	0x4F54281A
++#define OTG_CORE_REV_2_90a	0x4F54290A
++#define OTG_CORE_REV_2_91a	0x4F54291A
++#define OTG_CORE_REV_2_92a	0x4F54292A
++#define OTG_CORE_REV_2_93a	0x4F54293A
++#define OTG_CORE_REV_2_94a	0x4F54294A
++#define OTG_CORE_REV_3_00a	0x4F54300A
++
++/**
++ * Information for each ISOC packet.
++ */
++typedef struct iso_pkt_info {
++	uint32_t offset;
++	uint32_t length;
++	int32_t status;
++} iso_pkt_info_t;
++
++/**
++ * The <code>dwc_ep</code> structure represents the state of a single
++ * endpoint when acting in device mode. It contains the data items
++ * needed for an endpoint to be activated and transfer packets.
++ */
++typedef struct dwc_ep {
++	/** EP number used for register address lookup */
++	uint8_t num;
++	/** EP direction 0 = OUT */
++	unsigned is_in:1;
++	/** EP active. */
++	unsigned active:1;
++
++	/**
++	 * Periodic Tx FIFO # for IN EPs For INTR EP set to 0 to use non-periodic
++	 * Tx FIFO. If dedicated Tx FIFOs are enabled Tx FIFO # FOR IN EPs*/
++	unsigned tx_fifo_num:4;
++	/** EP type: 0 - Control, 1 - ISOC,	 2 - BULK,	3 - INTR */
++	unsigned type:2;
++#define DWC_OTG_EP_TYPE_CONTROL	   0
++#define DWC_OTG_EP_TYPE_ISOC	   1
++#define DWC_OTG_EP_TYPE_BULK	   2
++#define DWC_OTG_EP_TYPE_INTR	   3
++
++	/** DATA start PID for INTR and BULK EP */
++	unsigned data_pid_start:1;
++	/** Frame (even/odd) for ISOC EP */
++	unsigned even_odd_frame:1;
++	/** Max Packet bytes */
++	unsigned maxpacket:11;
++
++	/** Max Transfer size */
++	uint32_t maxxfer;
++
++	/** @name Transfer state */
++	/** @{ */
++
++	/**
++	 * Pointer to the beginning of the transfer buffer -- do not modify
++	 * during transfer.
++	 */
++
++	dwc_dma_t dma_addr;
++
++	dwc_dma_t dma_desc_addr;
++	dwc_otg_dev_dma_desc_t *desc_addr;
++
++	uint8_t *start_xfer_buff;
++	/** pointer to the transfer buffer */
++	uint8_t *xfer_buff;
++	/** Number of bytes to transfer */
++	unsigned xfer_len:19;
++	/** Number of bytes transferred. */
++	unsigned xfer_count:19;
++	/** Sent ZLP */
++	unsigned sent_zlp:1;
++	/** Total len for control transfer */
++	unsigned total_len:19;
++
++	/** stall clear flag */
++	unsigned stall_clear_flag:1;
++
++	/** SETUP pkt cnt rollover flag for EP0 out*/
++	unsigned stp_rollover;
++
++#ifdef DWC_UTE_CFI
++	/* The buffer mode */
++	data_buffer_mode_e buff_mode;
++
++	/* The chain of DMA descriptors.
++	 * MAX_DMA_DESCS_PER_EP will be allocated for each active EP.
++	 */
++	dwc_otg_dma_desc_t *descs;
++
++	/* The DMA address of the descriptors chain start */
++	dma_addr_t descs_dma_addr;
++	/** This variable stores the length of the last enqueued request */
++	uint32_t cfi_req_len;
++#endif				//DWC_UTE_CFI
++
++/** Max DMA Descriptor count for any EP */
++#define MAX_DMA_DESC_CNT 256
++	/** Allocated DMA Desc count */
++	uint32_t desc_cnt;
++
++	/** bInterval */
++	uint32_t bInterval;
++	/** Next frame num to setup next ISOC transfer */
++	uint32_t frame_num;
++	/** Indicates SOF number overrun in DSTS */
++	uint8_t frm_overrun;
++
++#ifdef DWC_UTE_PER_IO
++	/** Next frame num for which will be setup DMA Desc */
++	uint32_t xiso_frame_num;
++	/** bInterval */
++	uint32_t xiso_bInterval;
++	/** Count of currently active transfers - shall be either 0 or 1 */
++	int xiso_active_xfers;
++	int xiso_queued_xfers;
++#endif
++#ifdef DWC_EN_ISOC
++	/**
++	 * Variables specific for ISOC EPs
++	 *
++	 */
++	/** DMA addresses of ISOC buffers */
++	dwc_dma_t dma_addr0;
++	dwc_dma_t dma_addr1;
++
++	dwc_dma_t iso_dma_desc_addr;
++	dwc_otg_dev_dma_desc_t *iso_desc_addr;
++
++	/** pointer to the transfer buffers */
++	uint8_t *xfer_buff0;
++	uint8_t *xfer_buff1;
++
++	/** number of ISOC Buffer is processing */
++	uint32_t proc_buf_num;
++	/** Interval of ISOC Buffer processing */
++	uint32_t buf_proc_intrvl;
++	/** Data size for regular frame */
++	uint32_t data_per_frame;
++
++	/* todo - pattern data support is to be implemented in the future */
++	/** Data size for pattern frame */
++	uint32_t data_pattern_frame;
++	/** Frame number of pattern data */
++	uint32_t sync_frame;
++
++	/** bInterval */
++	uint32_t bInterval;
++	/** ISO Packet number per frame */
++	uint32_t pkt_per_frm;
++	/** Next frame num for which will be setup DMA Desc */
++	uint32_t next_frame;
++	/** Number of packets per buffer processing */
++	uint32_t pkt_cnt;
++	/** Info for all isoc packets */
++	iso_pkt_info_t *pkt_info;
++	/** current pkt number */
++	uint32_t cur_pkt;
++	/** current pkt number */
++	uint8_t *cur_pkt_addr;
++	/** current pkt number */
++	uint32_t cur_pkt_dma_addr;
++#endif				/* DWC_EN_ISOC */
++
++/** @} */
++} dwc_ep_t;
++
++/*
++ * Reasons for halting a host channel.
++ */
++typedef enum dwc_otg_halt_status {
++	DWC_OTG_HC_XFER_NO_HALT_STATUS,
++	DWC_OTG_HC_XFER_COMPLETE,
++	DWC_OTG_HC_XFER_URB_COMPLETE,
++	DWC_OTG_HC_XFER_ACK,
++	DWC_OTG_HC_XFER_NAK,
++	DWC_OTG_HC_XFER_NYET,
++	DWC_OTG_HC_XFER_STALL,
++	DWC_OTG_HC_XFER_XACT_ERR,
++	DWC_OTG_HC_XFER_FRAME_OVERRUN,
++	DWC_OTG_HC_XFER_BABBLE_ERR,
++	DWC_OTG_HC_XFER_DATA_TOGGLE_ERR,
++	DWC_OTG_HC_XFER_AHB_ERR,
++	DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE,
++	DWC_OTG_HC_XFER_URB_DEQUEUE
++} dwc_otg_halt_status_e;
++
++/**
++ * Host channel descriptor. This structure represents the state of a single
++ * host channel when acting in host mode. It contains the data items needed to
++ * transfer packets to an endpoint via a host channel.
++ */
++typedef struct dwc_hc {
++	/** Host channel number used for register address lookup */
++	uint8_t hc_num;
++
++	/** Device to access */
++	unsigned dev_addr:7;
++
++	/** EP to access */
++	unsigned ep_num:4;
++
++	/** EP direction. 0: OUT, 1: IN */
++	unsigned ep_is_in:1;
++
++	/**
++	 * EP speed.
++	 * One of the following values:
++	 *	- DWC_OTG_EP_SPEED_LOW
++	 *	- DWC_OTG_EP_SPEED_FULL
++	 *	- DWC_OTG_EP_SPEED_HIGH
++	 */
++	unsigned speed:2;
++#define DWC_OTG_EP_SPEED_LOW	0
++#define DWC_OTG_EP_SPEED_FULL	1
++#define DWC_OTG_EP_SPEED_HIGH	2
++
++	/**
++	 * Endpoint type.
++	 * One of the following values:
++	 *	- DWC_OTG_EP_TYPE_CONTROL: 0
++	 *	- DWC_OTG_EP_TYPE_ISOC: 1
++	 *	- DWC_OTG_EP_TYPE_BULK: 2
++	 *	- DWC_OTG_EP_TYPE_INTR: 3
++	 */
++	unsigned ep_type:2;
++
++	/** Max packet size in bytes */
++	unsigned max_packet:11;
++
++	/**
++	 * PID for initial transaction.
++	 * 0: DATA0,<br>
++	 * 1: DATA2,<br>
++	 * 2: DATA1,<br>
++	 * 3: MDATA (non-Control EP),
++	 *	  SETUP (Control EP)
++	 */
++	unsigned data_pid_start:2;
++#define DWC_OTG_HC_PID_DATA0 0
++#define DWC_OTG_HC_PID_DATA2 1
++#define DWC_OTG_HC_PID_DATA1 2
++#define DWC_OTG_HC_PID_MDATA 3
++#define DWC_OTG_HC_PID_SETUP 3
++
++	/** Number of periodic transactions per (micro)frame */
++	unsigned multi_count:2;
++
++	/** @name Transfer State */
++	/** @{ */
++
++	/** Pointer to the current transfer buffer position. */
++	uint8_t *xfer_buff;
++	/**
++	 * In Buffer DMA mode this buffer will be used
++	 * if xfer_buff is not DWORD aligned.
++	 */
++	dwc_dma_t align_buff;
++	/** Total number of bytes to transfer. */
++	uint32_t xfer_len;
++	/** Number of bytes transferred so far. */
++	uint32_t xfer_count;
++	/** Packet count at start of transfer.*/
++	uint16_t start_pkt_count;
++
++	/**
++	 * Flag to indicate whether the transfer has been started. Set to 1 if
++	 * it has been started, 0 otherwise.
++	 */
++	uint8_t xfer_started;
++
++	/**
++	 * Set to 1 to indicate that a PING request should be issued on this
++	 * channel. If 0, process normally.
++	 */
++	uint8_t do_ping;
++
++	/**
++	 * Set to 1 to indicate that the error count for this transaction is
++	 * non-zero. Set to 0 if the error count is 0.
++	 */
++	uint8_t error_state;
++
++	/**
++	 * Set to 1 to indicate that this channel should be halted the next
++	 * time a request is queued for the channel. This is necessary in
++	 * slave mode if no request queue space is available when an attempt
++	 * is made to halt the channel.
++	 */
++	uint8_t halt_on_queue;
++
++	/**
++	 * Set to 1 if the host channel has been halted, but the core is not
++	 * finished flushing queued requests. Otherwise 0.
++	 */
++	uint8_t halt_pending;
++
++	/**
++	 * Reason for halting the host channel.
++	 */
++	dwc_otg_halt_status_e halt_status;
++
++	/*
++	 * Split settings for the host channel
++	 */
++	uint8_t do_split;		   /**< Enable split for the channel */
++	uint8_t complete_split;	   /**< Enable complete split */
++	uint8_t hub_addr;		   /**< Address of high speed hub */
++
++	uint8_t port_addr;		   /**< Port of the low/full speed device */
++	/** Split transaction position
++	 * One of the following values:
++	 *	  - DWC_HCSPLIT_XACTPOS_MID
++	 *	  - DWC_HCSPLIT_XACTPOS_BEGIN
++	 *	  - DWC_HCSPLIT_XACTPOS_END
++	 *	  - DWC_HCSPLIT_XACTPOS_ALL */
++	uint8_t xact_pos;
++
++	/** Set when the host channel does a short read. */
++	uint8_t short_read;
++
++	/**
++	 * Number of requests issued for this channel since it was assigned to
++	 * the current transfer (not counting PINGs).
++	 */
++	uint8_t requests;
++
++	/**
++	 * Queue Head for the transfer being processed by this channel.
++	 */
++	struct dwc_otg_qh *qh;
++
++	/** @} */
++
++	/** Entry in list of host channels. */
++	 DWC_CIRCLEQ_ENTRY(dwc_hc) hc_list_entry;
++
++	/** @name Descriptor DMA support */
++	/** @{ */
++
++	/** Number of Transfer Descriptors */
++	uint16_t ntd;
++
++	/** Descriptor List DMA address */
++	dwc_dma_t desc_list_addr;
++
++	/** Scheduling micro-frame bitmap. */
++	uint8_t schinfo;
++
++	/** @} */
++} dwc_hc_t;
++
++/**
++ * The following parameters may be specified when starting the module. These
++ * parameters define how the DWC_otg controller should be configured.
++ */
++typedef struct dwc_otg_core_params {
++	int32_t opt;
++
++	/**
++	 * Specifies the OTG capabilities. The driver will automatically
++	 * detect the value for this parameter if none is specified.
++	 * 0 - HNP and SRP capable (default)
++	 * 1 - SRP Only capable
++	 * 2 - No HNP/SRP capable
++	 */
++	int32_t otg_cap;
++
++	/**
++	 * Specifies whether to use slave or DMA mode for accessing the data
++	 * FIFOs. The driver will automatically detect the value for this
++	 * parameter if none is specified.
++	 * 0 - Slave
++	 * 1 - DMA (default, if available)
++	 */
++	int32_t dma_enable;
++
++	/**
++	 * When DMA mode is enabled specifies whether to use address DMA or DMA
++	 * Descriptor mode for accessing the data FIFOs in device mode. The driver
++	 * will automatically detect the value for this if none is specified.
++	 * 0 - address DMA
++	 * 1 - DMA Descriptor(default, if available)
++	 */
++	int32_t dma_desc_enable;
++	/** The DMA Burst size (applicable only for External DMA
++	 * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32)
++	 */
++	int32_t dma_burst_size;	/* Translate this to GAHBCFG values */
++
++	/**
++	 * Specifies the maximum speed of operation in host and device mode.
++	 * The actual speed depends on the speed of the attached device and
++	 * the value of phy_type. The actual speed depends on the speed of the
++	 * attached device.
++	 * 0 - High Speed (default)
++	 * 1 - Full Speed
++	 */
++	int32_t speed;
++	/** Specifies whether low power mode is supported when attached
++	 *	to a Full Speed or Low Speed device in host mode.
++	 * 0 - Don't support low power mode (default)
++	 * 1 - Support low power mode
++	 */
++	int32_t host_support_fs_ls_low_power;
++
++	/** Specifies the PHY clock rate in low power mode when connected to a
++	 * Low Speed device in host mode. This parameter is applicable only if
++	 * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS
++	 * then defaults to 6 MHZ otherwise 48 MHZ.
++	 *
++	 * 0 - 48 MHz
++	 * 1 - 6 MHz
++	 */
++	int32_t host_ls_low_power_phy_clk;
++
++	/**
++	 * 0 - Use cC FIFO size parameters
++	 * 1 - Allow dynamic FIFO sizing (default)
++	 */
++	int32_t enable_dynamic_fifo;
++
++	/** Total number of 4-byte words in the data FIFO memory. This
++	 * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic
++	 * Tx FIFOs.
++	 * 32 to 32768 (default 8192)
++	 * Note: The total FIFO memory depth in the FPGA configuration is 8192.
++	 */
++	int32_t data_fifo_size;
++
++	/** Number of 4-byte words in the Rx FIFO in device mode when dynamic
++	 * FIFO sizing is enabled.
++	 * 16 to 32768 (default 1064)
++	 */
++	int32_t dev_rx_fifo_size;
++
++	/** Number of 4-byte words in the non-periodic Tx FIFO in device mode
++	 * when dynamic FIFO sizing is enabled.
++	 * 16 to 32768 (default 1024)
++	 */
++	int32_t dev_nperio_tx_fifo_size;
++
++	/** Number of 4-byte words in each of the periodic Tx FIFOs in device
++	 * mode when dynamic FIFO sizing is enabled.
++	 * 4 to 768 (default 256)
++	 */
++	uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS];
++
++	/** Number of 4-byte words in the Rx FIFO in host mode when dynamic
++	 * FIFO sizing is enabled.
++	 * 16 to 32768 (default 1024)
++	 */
++	int32_t host_rx_fifo_size;
++
++	/** Number of 4-byte words in the non-periodic Tx FIFO in host mode
++	 * when Dynamic FIFO sizing is enabled in the core.
++	 * 16 to 32768 (default 1024)
++	 */
++	int32_t host_nperio_tx_fifo_size;
++
++	/** Number of 4-byte words in the host periodic Tx FIFO when dynamic
++	 * FIFO sizing is enabled.
++	 * 16 to 32768 (default 1024)
++	 */
++	int32_t host_perio_tx_fifo_size;
++
++	/** The maximum transfer size supported in bytes.
++	 * 2047 to 65,535  (default 65,535)
++	 */
++	int32_t max_transfer_size;
++
++	/** The maximum number of packets in a transfer.
++	 * 15 to 511  (default 511)
++	 */
++	int32_t max_packet_count;
++
++	/** The number of host channel registers to use.
++	 * 1 to 16 (default 12)
++	 * Note: The FPGA configuration supports a maximum of 12 host channels.
++	 */
++	int32_t host_channels;
++
++	/** The number of endpoints in addition to EP0 available for device
++	 * mode operations.
++	 * 1 to 15 (default 6 IN and OUT)
++	 * Note: The FPGA configuration supports a maximum of 6 IN and OUT
++	 * endpoints in addition to EP0.
++	 */
++	int32_t dev_endpoints;
++
++		/**
++		 * Specifies the type of PHY interface to use. By default, the driver
++		 * will automatically detect the phy_type.
++		 *
++		 * 0 - Full Speed PHY
++		 * 1 - UTMI+ (default)
++		 * 2 - ULPI
++		 */
++	int32_t phy_type;
++
++	/**
++	 * Specifies the UTMI+ Data Width. This parameter is
++	 * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI
++	 * PHY_TYPE, this parameter indicates the data width between
++	 * the MAC and the ULPI Wrapper.) Also, this parameter is
++	 * applicable only if the OTG_HSPHY_WIDTH cC parameter was set
++	 * to "8 and 16 bits", meaning that the core has been
++	 * configured to work at either data path width.
++	 *
++	 * 8 or 16 bits (default 16)
++	 */
++	int32_t phy_utmi_width;
++
++	/**
++	 * Specifies whether the ULPI operates at double or single
++	 * data rate. This parameter is only applicable if PHY_TYPE is
++	 * ULPI.
++	 *
++	 * 0 - single data rate ULPI interface with 8 bit wide data
++	 * bus (default)
++	 * 1 - double data rate ULPI interface with 4 bit wide data
++	 * bus
++	 */
++	int32_t phy_ulpi_ddr;
++
++	/**
++	 * Specifies whether to use the internal or external supply to
++	 * drive the vbus with a ULPI phy.
++	 */
++	int32_t phy_ulpi_ext_vbus;
++
++	/**
++	 * Specifies whether to use the I2Cinterface for full speed PHY. This
++	 * parameter is only applicable if PHY_TYPE is FS.
++	 * 0 - No (default)
++	 * 1 - Yes
++	 */
++	int32_t i2c_enable;
++
++	int32_t ulpi_fs_ls;
++
++	int32_t ts_dline;
++
++	/**
++	 * Specifies whether dedicated transmit FIFOs are
++	 * enabled for non periodic IN endpoints in device mode
++	 * 0 - No
++	 * 1 - Yes
++	 */
++	int32_t en_multiple_tx_fifo;
++
++	/** Number of 4-byte words in each of the Tx FIFOs in device
++	 * mode when dynamic FIFO sizing is enabled.
++	 * 4 to 768 (default 256)
++	 */
++	uint32_t dev_tx_fifo_size[MAX_TX_FIFOS];
++
++	/** Thresholding enable flag-
++	 * bit 0 - enable non-ISO Tx thresholding
++	 * bit 1 - enable ISO Tx thresholding
++	 * bit 2 - enable Rx thresholding
++	 */
++	uint32_t thr_ctl;
++
++	/** Thresholding length for Tx
++	 *	FIFOs in 32 bit DWORDs
++	 */
++	uint32_t tx_thr_length;
++
++	/** Thresholding length for Rx
++	 *	FIFOs in 32 bit DWORDs
++	 */
++	uint32_t rx_thr_length;
++
++	/**
++	 * Specifies whether LPM (Link Power Management) support is enabled
++	 */
++	int32_t lpm_enable;
++
++	/** Per Transfer Interrupt
++	 *	mode enable flag
++	 * 1 - Enabled
++	 * 0 - Disabled
++	 */
++	int32_t pti_enable;
++
++	/** Multi Processor Interrupt
++	 *	mode enable flag
++	 * 1 - Enabled
++	 * 0 - Disabled
++	 */
++	int32_t mpi_enable;
++
++	/** IS_USB Capability
++	 * 1 - Enabled
++	 * 0 - Disabled
++	 */
++	int32_t ic_usb_cap;
++
++	/** AHB Threshold Ratio
++	 * 2'b00 AHB Threshold = 	MAC Threshold
++	 * 2'b01 AHB Threshold = 1/2 	MAC Threshold
++	 * 2'b10 AHB Threshold = 1/4	MAC Threshold
++	 * 2'b11 AHB Threshold = 1/8	MAC Threshold
++	 */
++	int32_t ahb_thr_ratio;
++
++	/** ADP Support
++	 * 1 - Enabled
++	 * 0 - Disabled
++	 */
++	int32_t adp_supp_enable;
++
++	/** HFIR Reload Control
++	 * 0 - The HFIR cannot be reloaded dynamically.
++	 * 1 - Allow dynamic reloading of the HFIR register during runtime.
++	 */
++	int32_t reload_ctl;
++
++	/** DCFG: Enable device Out NAK
++	 * 0 - The core does not set NAK after Bulk Out transfer complete.
++	 * 1 - The core sets NAK after Bulk OUT transfer complete.
++	 */
++	int32_t dev_out_nak;
++
++	/** DCFG: Enable Continue on BNA
++	 * After receiving BNA interrupt the core disables the endpoint,when the
++	 * endpoint is re-enabled by the application the core starts processing
++	 * 0 - from the DOEPDMA descriptor
++	 * 1 - from the descriptor which received the BNA.
++	 */
++	int32_t cont_on_bna;
++
++	/** GAHBCFG: AHB Single Support
++	 * This bit when programmed supports SINGLE transfers for remainder
++	 * data in a transfer for DMA mode of operation.
++	 * 0 - in this case the remainder data will be sent using INCR burst size.
++	 * 1 - in this case the remainder data will be sent using SINGLE burst size.
++	 */
++	int32_t ahb_single;
++
++	/** Core Power down mode
++	 * 0 - No Power Down is enabled
++	 * 1 - Reserved
++	 * 2 - Complete Power Down (Hibernation)
++	 */
++	int32_t power_down;
++
++	/** OTG revision supported
++	 * 0 - OTG 1.3 revision
++	 * 1 - OTG 2.0 revision
++	 */
++	int32_t otg_ver;
++
++} dwc_otg_core_params_t;
++
++#ifdef DEBUG
++struct dwc_otg_core_if;
++typedef struct hc_xfer_info {
++	struct dwc_otg_core_if *core_if;
++	dwc_hc_t *hc;
++} hc_xfer_info_t;
++#endif
++
++typedef struct ep_xfer_info {
++	struct dwc_otg_core_if *core_if;
++	dwc_ep_t *ep;
++	uint8_t state;
++} ep_xfer_info_t;
++/*
++ * Device States
++ */
++typedef enum dwc_otg_lx_state {
++	/** On state */
++	DWC_OTG_L0,
++	/** LPM sleep state*/
++	DWC_OTG_L1,
++	/** USB suspend state*/
++	DWC_OTG_L2,
++	/** Off state*/
++	DWC_OTG_L3
++} dwc_otg_lx_state_e;
++
++struct dwc_otg_global_regs_backup {
++	uint32_t gotgctl_local;
++	uint32_t gintmsk_local;
++	uint32_t gahbcfg_local;
++	uint32_t gusbcfg_local;
++	uint32_t grxfsiz_local;
++	uint32_t gnptxfsiz_local;
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	uint32_t glpmcfg_local;
++#endif
++	uint32_t gi2cctl_local;
++	uint32_t hptxfsiz_local;
++	uint32_t pcgcctl_local;
++	uint32_t gdfifocfg_local;
++	uint32_t dtxfsiz_local[MAX_EPS_CHANNELS];
++	uint32_t gpwrdn_local;
++	uint32_t xhib_pcgcctl;
++	uint32_t xhib_gpwrdn;
++};
++
++struct dwc_otg_host_regs_backup {
++	uint32_t hcfg_local;
++	uint32_t haintmsk_local;
++	uint32_t hcintmsk_local[MAX_EPS_CHANNELS];
++	uint32_t hprt0_local;
++	uint32_t hfir_local;
++};
++
++struct dwc_otg_dev_regs_backup {
++	uint32_t dcfg;
++	uint32_t dctl;
++	uint32_t daintmsk;
++	uint32_t diepmsk;
++	uint32_t doepmsk;
++	uint32_t diepctl[MAX_EPS_CHANNELS];
++	uint32_t dieptsiz[MAX_EPS_CHANNELS];
++	uint32_t diepdma[MAX_EPS_CHANNELS];
++};
++/**
++ * The <code>dwc_otg_core_if</code> structure contains information needed to manage
++ * the DWC_otg controller acting in either host or device mode. It
++ * represents the programming view of the controller as a whole.
++ */
++struct dwc_otg_core_if {
++	/** Parameters that define how the core should be configured.*/
++	dwc_otg_core_params_t *core_params;
++
++	/** Core Global registers starting at offset 000h. */
++	dwc_otg_core_global_regs_t *core_global_regs;
++
++	/** Device-specific information */
++	dwc_otg_dev_if_t *dev_if;
++	/** Host-specific information */
++	dwc_otg_host_if_t *host_if;
++
++	/** Value from SNPSID register */
++	uint32_t snpsid;
++
++	/*
++	 * Set to 1 if the core PHY interface bits in USBCFG have been
++	 * initialized.
++	 */
++	uint8_t phy_init_done;
++
++	/*
++	 * SRP Success flag, set by srp success interrupt in FS I2C mode
++	 */
++	uint8_t srp_success;
++	uint8_t srp_timer_started;
++	/** Timer for SRP. If it expires before SRP is successful
++	 * clear the SRP. */
++	dwc_timer_t *srp_timer;
++
++#ifdef DWC_DEV_SRPCAP
++	/* This timer is needed to power on the hibernated host core if SRP is not
++	 * initiated on connected SRP capable device for limited period of time
++	 */
++	uint8_t pwron_timer_started;
++	dwc_timer_t *pwron_timer;
++#endif
++	/* Common configuration information */
++	/** Power and Clock Gating Control Register */
++	volatile uint32_t *pcgcctl;
++#define DWC_OTG_PCGCCTL_OFFSET 0xE00
++
++	/** Push/pop addresses for endpoints or host channels.*/
++	uint32_t *data_fifo[MAX_EPS_CHANNELS];
++#define DWC_OTG_DATA_FIFO_OFFSET 0x1000
++#define DWC_OTG_DATA_FIFO_SIZE 0x1000
++
++	/** Total RAM for FIFOs (Bytes) */
++	uint16_t total_fifo_size;
++	/** Size of Rx FIFO (Bytes) */
++	uint16_t rx_fifo_size;
++	/** Size of Non-periodic Tx FIFO (Bytes) */
++	uint16_t nperio_tx_fifo_size;
++
++	/** 1 if DMA is enabled, 0 otherwise. */
++	uint8_t dma_enable;
++
++	/** 1 if DMA descriptor is enabled, 0 otherwise. */
++	uint8_t dma_desc_enable;
++
++	/** 1 if PTI Enhancement mode is enabled, 0 otherwise. */
++	uint8_t pti_enh_enable;
++
++	/** 1 if MPI Enhancement mode is enabled, 0 otherwise. */
++	uint8_t multiproc_int_enable;
++
++	/** 1 if dedicated Tx FIFOs are enabled, 0 otherwise. */
++	uint8_t en_multiple_tx_fifo;
++
++	/** Set to 1 if multiple packets of a high-bandwidth transfer is in
++	 * process of being queued */
++	uint8_t queuing_high_bandwidth;
++
++	/** Hardware Configuration -- stored here for convenience.*/
++	hwcfg1_data_t hwcfg1;
++	hwcfg2_data_t hwcfg2;
++	hwcfg3_data_t hwcfg3;
++	hwcfg4_data_t hwcfg4;
++	fifosize_data_t hptxfsiz;
++
++	/** Host and Device Configuration -- stored here for convenience.*/
++	hcfg_data_t hcfg;
++	dcfg_data_t dcfg;
++
++	/** The operational State, during transations
++	 * (a_host>>a_peripherial and b_device=>b_host) this may not
++	 * match the core but allows the software to determine
++	 * transitions.
++	 */
++	uint8_t op_state;
++
++	/**
++	 * Set to 1 if the HCD needs to be restarted on a session request
++	 * interrupt. This is required if no connector ID status change has
++	 * occurred since the HCD was last disconnected.
++	 */
++	uint8_t restart_hcd_on_session_req;
++
++	/** HCD callbacks */
++	/** A-Device is a_host */
++#define A_HOST		(1)
++	/** A-Device is a_suspend */
++#define A_SUSPEND	(2)
++	/** A-Device is a_peripherial */
++#define A_PERIPHERAL	(3)
++	/** B-Device is operating as a Peripheral. */
++#define B_PERIPHERAL	(4)
++	/** B-Device is operating as a Host. */
++#define B_HOST		(5)
++
++	/** HCD callbacks */
++	struct dwc_otg_cil_callbacks *hcd_cb;
++	/** PCD callbacks */
++	struct dwc_otg_cil_callbacks *pcd_cb;
++
++	/** Device mode Periodic Tx FIFO Mask */
++	uint32_t p_tx_msk;
++	/** Device mode Periodic Tx FIFO Mask */
++	uint32_t tx_msk;
++
++	/** Workqueue object used for handling several interrupts */
++	dwc_workq_t *wq_otg;
++
++	/** Timer object used for handling "Wakeup Detected" Interrupt */
++	dwc_timer_t *wkp_timer;
++	/** This arrays used for debug purposes for DEV OUT NAK enhancement */
++	uint32_t start_doeptsiz_val[MAX_EPS_CHANNELS];
++	ep_xfer_info_t ep_xfer_info[MAX_EPS_CHANNELS];
++	dwc_timer_t *ep_xfer_timer[MAX_EPS_CHANNELS];
++#ifdef DEBUG
++	uint32_t start_hcchar_val[MAX_EPS_CHANNELS];
++
++	hc_xfer_info_t hc_xfer_info[MAX_EPS_CHANNELS];
++	dwc_timer_t *hc_xfer_timer[MAX_EPS_CHANNELS];
++
++	uint32_t hfnum_7_samples;
++	uint64_t hfnum_7_frrem_accum;
++	uint32_t hfnum_0_samples;
++	uint64_t hfnum_0_frrem_accum;
++	uint32_t hfnum_other_samples;
++	uint64_t hfnum_other_frrem_accum;
++#endif
++
++#ifdef DWC_UTE_CFI
++	uint16_t pwron_rxfsiz;
++	uint16_t pwron_gnptxfsiz;
++	uint16_t pwron_txfsiz[15];
++
++	uint16_t init_rxfsiz;
++	uint16_t init_gnptxfsiz;
++	uint16_t init_txfsiz[15];
++#endif
++
++	/** Lx state of device */
++	dwc_otg_lx_state_e lx_state;
++
++	/** Saved Core Global registers */
++	struct dwc_otg_global_regs_backup *gr_backup;
++	/** Saved Host registers */
++	struct dwc_otg_host_regs_backup *hr_backup;
++	/** Saved Device registers */
++	struct dwc_otg_dev_regs_backup *dr_backup;
++
++	/** Power Down Enable */
++	uint32_t power_down;
++
++	/** ADP support Enable */
++	uint32_t adp_enable;
++
++	/** ADP structure object */
++	dwc_otg_adp_t adp;
++
++	/** hibernation/suspend flag */
++	int hibernation_suspend;
++
++	/** Device mode extended hibernation flag */
++	int xhib;
++
++	/** OTG revision supported */
++	uint32_t otg_ver;
++
++	/** OTG status flag used for HNP polling */
++	uint8_t otg_sts;
++
++	/** Pointer to either hcd->lock or pcd->lock */
++	dwc_spinlock_t *lock;
++
++	/** Start predict NextEP based on Learning Queue if equal 1,
++	 * also used as counter of disabled NP IN EP's */
++	uint8_t start_predict;
++
++	/** NextEp sequence, including EP0: nextep_seq[] = EP if non-periodic and
++	 * active, 0xff otherwise */
++	uint8_t nextep_seq[MAX_EPS_CHANNELS];
++
++	/** Index of fisrt EP in nextep_seq array which should be re-enabled **/
++	uint8_t first_in_nextep_seq;
++
++	/** Frame number while entering to ISR - needed for ISOCs **/
++	uint32_t frame_num;
++
++};
++
++#ifdef DEBUG
++/*
++ * This function is called when transfer is timed out.
++ */
++extern void hc_xfer_timeout(void *ptr);
++#endif
++
++/*
++ * This function is called when transfer is timed out on endpoint.
++ */
++extern void ep_xfer_timeout(void *ptr);
++
++/*
++ * The following functions are functions for works
++ * using during handling some interrupts
++ */
++extern void w_conn_id_status_change(void *p);
++
++extern void w_wakeup_detected(void *p);
++
++/** Saves global register values into system memory. */
++extern int dwc_otg_save_global_regs(dwc_otg_core_if_t * core_if);
++/** Saves device register values into system memory. */
++extern int dwc_otg_save_dev_regs(dwc_otg_core_if_t * core_if);
++/** Saves host register values into system memory. */
++extern int dwc_otg_save_host_regs(dwc_otg_core_if_t * core_if);
++/** Restore global register values. */
++extern int dwc_otg_restore_global_regs(dwc_otg_core_if_t * core_if);
++/** Restore host register values. */
++extern int dwc_otg_restore_host_regs(dwc_otg_core_if_t * core_if, int reset);
++/** Restore device register values. */
++extern int dwc_otg_restore_dev_regs(dwc_otg_core_if_t * core_if,
++				    int rem_wakeup);
++extern int restore_lpm_i2c_regs(dwc_otg_core_if_t * core_if);
++extern int restore_essential_regs(dwc_otg_core_if_t * core_if, int rmode,
++				  int is_host);
++
++extern int dwc_otg_host_hibernation_restore(dwc_otg_core_if_t * core_if,
++					    int restore_mode, int reset);
++extern int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if,
++					      int rem_wakeup, int reset);
++
++/*
++ * The following functions support initialization of the CIL driver component
++ * and the DWC_otg controller.
++ */
++extern void dwc_otg_core_host_init(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_core_dev_init(dwc_otg_core_if_t * _core_if);
++
++/** @name Device CIL Functions
++ * The following functions support managing the DWC_otg controller in device
++ * mode.
++ */
++/**@{*/
++extern void dwc_otg_wakeup(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_read_setup_packet(dwc_otg_core_if_t * _core_if,
++				      uint32_t * _dest);
++extern uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_ep0_activate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep);
++extern void dwc_otg_ep_activate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep);
++extern void dwc_otg_ep_deactivate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep);
++extern void dwc_otg_ep_start_transfer(dwc_otg_core_if_t * _core_if,
++				      dwc_ep_t * _ep);
++extern void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t * _core_if,
++					 dwc_ep_t * _ep);
++extern void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t * _core_if,
++				       dwc_ep_t * _ep);
++extern void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t * _core_if,
++					  dwc_ep_t * _ep);
++extern void dwc_otg_ep_write_packet(dwc_otg_core_if_t * _core_if,
++				    dwc_ep_t * _ep, int _dma);
++extern void dwc_otg_ep_set_stall(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep);
++extern void dwc_otg_ep_clear_stall(dwc_otg_core_if_t * _core_if,
++				   dwc_ep_t * _ep);
++extern void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t * _core_if);
++
++#ifdef DWC_EN_ISOC
++extern void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t * core_if,
++					      dwc_ep_t * ep);
++extern void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t * core_if,
++					      dwc_ep_t * ep);
++#endif /* DWC_EN_ISOC */
++/**@}*/
++
++/** @name Host CIL Functions
++ * The following functions support managing the DWC_otg controller in host
++ * mode.
++ */
++/**@{*/
++extern void dwc_otg_hc_init(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc);
++extern void dwc_otg_hc_halt(dwc_otg_core_if_t * _core_if,
++			    dwc_hc_t * _hc, dwc_otg_halt_status_e _halt_status);
++extern void dwc_otg_hc_cleanup(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc);
++extern void dwc_otg_hc_start_transfer(dwc_otg_core_if_t * _core_if,
++				      dwc_hc_t * _hc);
++extern int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t * _core_if,
++					dwc_hc_t * _hc);
++extern void dwc_otg_hc_do_ping(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc);
++extern void dwc_otg_hc_write_packet(dwc_otg_core_if_t * _core_if,
++				    dwc_hc_t * _hc);
++extern void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t * _core_if);
++
++extern void dwc_otg_hc_start_transfer_ddma(dwc_otg_core_if_t * core_if,
++					   dwc_hc_t * hc);
++
++extern uint32_t calc_frame_interval(dwc_otg_core_if_t * core_if);
++
++/* Macro used to clear one channel interrupt */
++#define clear_hc_int(_hc_regs_, _intr_) \
++do { \
++	hcint_data_t hcint_clear = {.d32 = 0}; \
++	hcint_clear.b._intr_ = 1; \
++	DWC_WRITE_REG32(&(_hc_regs_)->hcint, hcint_clear.d32); \
++} while (0)
++
++/*
++ * Macro used to disable one channel interrupt. Channel interrupts are
++ * disabled when the channel is halted or released by the interrupt handler.
++ * There is no need to handle further interrupts of that type until the
++ * channel is re-assigned. In fact, subsequent handling may cause crashes
++ * because the channel structures are cleaned up when the channel is released.
++ */
++#define disable_hc_int(_hc_regs_, _intr_) \
++do { \
++	hcintmsk_data_t hcintmsk = {.d32 = 0}; \
++	hcintmsk.b._intr_ = 1; \
++	DWC_MODIFY_REG32(&(_hc_regs_)->hcintmsk, hcintmsk.d32, 0); \
++} while (0)
++
++/**
++ * This function Reads HPRT0 in preparation to modify. It keeps the
++ * WC bits 0 so that if they are read as 1, they won't clear when you
++ * write it back
++ */
++static inline uint32_t dwc_otg_read_hprt0(dwc_otg_core_if_t * _core_if)
++{
++	hprt0_data_t hprt0;
++	hprt0.d32 = DWC_READ_REG32(_core_if->host_if->hprt0);
++	hprt0.b.prtena = 0;
++	hprt0.b.prtconndet = 0;
++	hprt0.b.prtenchng = 0;
++	hprt0.b.prtovrcurrchng = 0;
++	return hprt0.d32;
++}
++
++/**@}*/
++
++/** @name Common CIL Functions
++ * The following functions support managing the DWC_otg controller in either
++ * device or host mode.
++ */
++/**@{*/
++
++extern void dwc_otg_read_packet(dwc_otg_core_if_t * core_if,
++				uint8_t * dest, uint16_t bytes);
++
++extern void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t * _core_if, const int _num);
++extern void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_core_reset(dwc_otg_core_if_t * _core_if);
++
++/**
++ * This function returns the Core Interrupt register.
++ */
++static inline uint32_t dwc_otg_read_core_intr(dwc_otg_core_if_t * core_if)
++{
++	return (DWC_READ_REG32(&core_if->core_global_regs->gintsts) &
++		DWC_READ_REG32(&core_if->core_global_regs->gintmsk));
++}
++
++/**
++ * This function returns the OTG Interrupt register.
++ */
++static inline uint32_t dwc_otg_read_otg_intr(dwc_otg_core_if_t * core_if)
++{
++	return (DWC_READ_REG32(&core_if->core_global_regs->gotgint));
++}
++
++/**
++ * This function reads the Device All Endpoints Interrupt register and
++ * returns the IN endpoint interrupt bits.
++ */
++static inline uint32_t dwc_otg_read_dev_all_in_ep_intr(dwc_otg_core_if_t *
++						       core_if)
++{
++
++	uint32_t v;
++
++	if (core_if->multiproc_int_enable) {
++		v = DWC_READ_REG32(&core_if->dev_if->
++				   dev_global_regs->deachint) &
++		    DWC_READ_REG32(&core_if->
++				   dev_if->dev_global_regs->deachintmsk);
++	} else {
++		v = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daint) &
++		    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk);
++	}
++	return (v & 0xffff);
++}
++
++/**
++ * This function reads the Device All Endpoints Interrupt register and
++ * returns the OUT endpoint interrupt bits.
++ */
++static inline uint32_t dwc_otg_read_dev_all_out_ep_intr(dwc_otg_core_if_t *
++							core_if)
++{
++	uint32_t v;
++
++	if (core_if->multiproc_int_enable) {
++		v = DWC_READ_REG32(&core_if->dev_if->
++				   dev_global_regs->deachint) &
++		    DWC_READ_REG32(&core_if->
++				   dev_if->dev_global_regs->deachintmsk);
++	} else {
++		v = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daint) &
++		    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk);
++	}
++
++	return ((v & 0xffff0000) >> 16);
++}
++
++/**
++ * This function returns the Device IN EP Interrupt register
++ */
++static inline uint32_t dwc_otg_read_dev_in_ep_intr(dwc_otg_core_if_t * core_if,
++						   dwc_ep_t * ep)
++{
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	uint32_t v, msk, emp;
++
++	if (core_if->multiproc_int_enable) {
++		msk =
++		    DWC_READ_REG32(&dev_if->
++				   dev_global_regs->diepeachintmsk[ep->num]);
++		emp =
++		    DWC_READ_REG32(&dev_if->
++				   dev_global_regs->dtknqr4_fifoemptymsk);
++		msk |= ((emp >> ep->num) & 0x1) << 7;
++		v = DWC_READ_REG32(&dev_if->in_ep_regs[ep->num]->diepint) & msk;
++	} else {
++		msk = DWC_READ_REG32(&dev_if->dev_global_regs->diepmsk);
++		emp =
++		    DWC_READ_REG32(&dev_if->
++				   dev_global_regs->dtknqr4_fifoemptymsk);
++		msk |= ((emp >> ep->num) & 0x1) << 7;
++		v = DWC_READ_REG32(&dev_if->in_ep_regs[ep->num]->diepint) & msk;
++	}
++
++	return v;
++}
++
++/**
++ * This function returns the Device OUT EP Interrupt register
++ */
++static inline uint32_t dwc_otg_read_dev_out_ep_intr(dwc_otg_core_if_t *
++						    _core_if, dwc_ep_t * _ep)
++{
++	dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
++	uint32_t v;
++	doepmsk_data_t msk = {.d32 = 0 };
++
++	if (_core_if->multiproc_int_enable) {
++		msk.d32 =
++		    DWC_READ_REG32(&dev_if->
++				   dev_global_regs->doepeachintmsk[_ep->num]);
++		if (_core_if->pti_enh_enable) {
++			msk.b.pktdrpsts = 1;
++		}
++		v = DWC_READ_REG32(&dev_if->
++				   out_ep_regs[_ep->num]->doepint) & msk.d32;
++	} else {
++		msk.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->doepmsk);
++		if (_core_if->pti_enh_enable) {
++			msk.b.pktdrpsts = 1;
++		}
++		v = DWC_READ_REG32(&dev_if->
++				   out_ep_regs[_ep->num]->doepint) & msk.d32;
++	}
++	return v;
++}
++
++/**
++ * This function returns the Host All Channel Interrupt register
++ */
++static inline uint32_t dwc_otg_read_host_all_channels_intr(dwc_otg_core_if_t *
++							   _core_if)
++{
++	return (DWC_READ_REG32(&_core_if->host_if->host_global_regs->haint));
++}
++
++static inline uint32_t dwc_otg_read_host_channel_intr(dwc_otg_core_if_t *
++						      _core_if, dwc_hc_t * _hc)
++{
++	return (DWC_READ_REG32
++		(&_core_if->host_if->hc_regs[_hc->hc_num]->hcint));
++}
++
++/**
++ * This function returns the mode of the operation, host or device.
++ *
++ * @return 0 - Device Mode, 1 - Host Mode
++ */
++static inline uint32_t dwc_otg_mode(dwc_otg_core_if_t * _core_if)
++{
++	return (DWC_READ_REG32(&_core_if->core_global_regs->gintsts) & 0x1);
++}
++
++/**@}*/
++
++/**
++ * DWC_otg CIL callback structure. This structure allows the HCD and
++ * PCD to register functions used for starting and stopping the PCD
++ * and HCD for role change on for a DRD.
++ */
++typedef struct dwc_otg_cil_callbacks {
++	/** Start function for role change */
++	int (*start) (void *_p);
++	/** Stop Function for role change */
++	int (*stop) (void *_p);
++	/** Disconnect Function for role change */
++	int (*disconnect) (void *_p);
++	/** Resume/Remote wakeup Function */
++	int (*resume_wakeup) (void *_p);
++	/** Suspend function */
++	int (*suspend) (void *_p);
++	/** Session Start (SRP) */
++	int (*session_start) (void *_p);
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	/** Sleep (switch to L0 state) */
++	int (*sleep) (void *_p);
++#endif
++	/** Pointer passed to start() and stop() */
++	void *p;
++} dwc_otg_cil_callbacks_t;
++
++extern void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t * _core_if,
++					       dwc_otg_cil_callbacks_t * _cb,
++					       void *_p);
++extern void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t * _core_if,
++					       dwc_otg_cil_callbacks_t * _cb,
++					       void *_p);
++
++void dwc_otg_initiate_srp(dwc_otg_core_if_t * core_if);
++
++//////////////////////////////////////////////////////////////////////
++/** Start the HCD.  Helper function for using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_hcd_start(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->hcd_cb && core_if->hcd_cb->start) {
++		core_if->hcd_cb->start(core_if->hcd_cb->p);
++	}
++}
++
++/** Stop the HCD.  Helper function for using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_hcd_stop(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->hcd_cb && core_if->hcd_cb->stop) {
++		core_if->hcd_cb->stop(core_if->hcd_cb->p);
++	}
++}
++
++/** Disconnect the HCD.  Helper function for using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_hcd_disconnect(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->hcd_cb && core_if->hcd_cb->disconnect) {
++		core_if->hcd_cb->disconnect(core_if->hcd_cb->p);
++	}
++}
++
++/** Inform the HCD the a New Session has begun.  Helper function for
++ * using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_hcd_session_start(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->hcd_cb && core_if->hcd_cb->session_start) {
++		core_if->hcd_cb->session_start(core_if->hcd_cb->p);
++	}
++}
++
++#ifdef CONFIG_USB_DWC_OTG_LPM
++/**
++ * Inform the HCD about LPM sleep.
++ * Helper function for using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_hcd_sleep(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->hcd_cb && core_if->hcd_cb->sleep) {
++		core_if->hcd_cb->sleep(core_if->hcd_cb->p);
++	}
++}
++#endif
++
++/** Resume the HCD.  Helper function for using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_hcd_resume(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->hcd_cb && core_if->hcd_cb->resume_wakeup) {
++		core_if->hcd_cb->resume_wakeup(core_if->hcd_cb->p);
++	}
++}
++
++/** Start the PCD.  Helper function for using the PCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_pcd_start(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->pcd_cb && core_if->pcd_cb->start) {
++		core_if->pcd_cb->start(core_if->pcd_cb->p);
++	}
++}
++
++/** Stop the PCD.  Helper function for using the PCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_pcd_stop(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->pcd_cb && core_if->pcd_cb->stop) {
++		core_if->pcd_cb->stop(core_if->pcd_cb->p);
++	}
++}
++
++/** Suspend the PCD.  Helper function for using the PCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_pcd_suspend(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->pcd_cb && core_if->pcd_cb->suspend) {
++		core_if->pcd_cb->suspend(core_if->pcd_cb->p);
++	}
++}
++
++/** Resume the PCD.  Helper function for using the PCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_pcd_resume(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
++		core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
++	}
++}
++
++//////////////////////////////////////////////////////////////////////
++
++#endif
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,1588 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil_intr.c $
++ * $Revision: #32 $
++ * $Date: 2012/08/10 $
++ * $Change: 2047372 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ *
++ * The Core Interface Layer provides basic services for accessing and
++ * managing the DWC_otg hardware. These services are used by both the
++ * Host Controller Driver and the Peripheral Controller Driver.
++ *
++ * This file contains the Common Interrupt handlers.
++ */
++#include "dwc_os.h"
++#include "dwc_otg_regs.h"
++#include "dwc_otg_cil.h"
++#include "dwc_otg_driver.h"
++#include "dwc_otg_pcd.h"
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_mphi_fix.h"
++
++#ifdef DEBUG
++inline const char *op_state_str(dwc_otg_core_if_t * core_if)
++{
++	return (core_if->op_state == A_HOST ? "a_host" :
++		(core_if->op_state == A_SUSPEND ? "a_suspend" :
++		 (core_if->op_state == A_PERIPHERAL ? "a_peripheral" :
++		  (core_if->op_state == B_PERIPHERAL ? "b_peripheral" :
++		   (core_if->op_state == B_HOST ? "b_host" : "unknown")))));
++}
++#endif
++
++/** This function will log a debug message
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_mode_mismatch_intr(dwc_otg_core_if_t * core_if)
++{
++	gintsts_data_t gintsts;
++	DWC_WARN("Mode Mismatch Interrupt: currently in %s mode\n",
++		 dwc_otg_mode(core_if) ? "Host" : "Device");
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.modemismatch = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++	return 1;
++}
++
++/**
++ * This function handles the OTG Interrupts. It reads the OTG
++ * Interrupt Register (GOTGINT) to determine what interrupt has
++ * occurred.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_otg_intr(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	gotgint_data_t gotgint;
++	gotgctl_data_t gotgctl;
++	gintmsk_data_t gintmsk;
++	gpwrdn_data_t gpwrdn;
++
++	gotgint.d32 = DWC_READ_REG32(&global_regs->gotgint);
++	gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl);
++	DWC_DEBUGPL(DBG_CIL, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint.d32,
++		    op_state_str(core_if));
++
++	if (gotgint.b.sesenddet) {
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "Session End Detected++ (%s)\n",
++			    op_state_str(core_if));
++		gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl);
++
++		if (core_if->op_state == B_HOST) {
++			cil_pcd_start(core_if);
++			core_if->op_state = B_PERIPHERAL;
++		} else {
++			/* If not B_HOST and Device HNP still set. HNP
++			 * Did not succeed!*/
++			if (gotgctl.b.devhnpen) {
++				DWC_DEBUGPL(DBG_ANY, "Session End Detected\n");
++				__DWC_ERROR("Device Not Connected/Responding!\n");
++			}
++
++			/* If Session End Detected the B-Cable has
++			 * been disconnected. */
++			/* Reset PCD and Gadget driver to a
++			 * clean state. */
++			core_if->lx_state = DWC_OTG_L0;
++			DWC_SPINUNLOCK(core_if->lock);
++			cil_pcd_stop(core_if);
++			DWC_SPINLOCK(core_if->lock);
++
++			if (core_if->adp_enable) {
++				if (core_if->power_down == 2) {
++					gpwrdn.d32 = 0;
++					gpwrdn.b.pwrdnswtch = 1;
++					DWC_MODIFY_REG32(&core_if->
++							 core_global_regs->
++							 gpwrdn, gpwrdn.d32, 0);
++				}
++
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pmuintsel = 1;
++				gpwrdn.b.pmuactv = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++
++				dwc_otg_adp_sense_start(core_if);
++			}
++		}
++
++		gotgctl.d32 = 0;
++		gotgctl.b.devhnpen = 1;
++		DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0);
++	}
++	if (gotgint.b.sesreqsucstschng) {
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "Session Reqeust Success Status Change++\n");
++		gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl);
++		if (gotgctl.b.sesreqscs) {
++
++			if ((core_if->core_params->phy_type ==
++			     DWC_PHY_TYPE_PARAM_FS) && (core_if->core_params->i2c_enable)) {
++				core_if->srp_success = 1;
++			} else {
++				DWC_SPINUNLOCK(core_if->lock);
++				cil_pcd_resume(core_if);
++				DWC_SPINLOCK(core_if->lock);
++				/* Clear Session Request */
++				gotgctl.d32 = 0;
++				gotgctl.b.sesreq = 1;
++				DWC_MODIFY_REG32(&global_regs->gotgctl,
++						 gotgctl.d32, 0);
++			}
++		}
++	}
++	if (gotgint.b.hstnegsucstschng) {
++		/* Print statements during the HNP interrupt handling
++		 * can cause it to fail.*/
++		gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl);
++		/* WA for 3.00a- HW is not setting cur_mode, even sometimes
++		 * this does not help*/
++		if (core_if->snpsid >= OTG_CORE_REV_3_00a)
++			dwc_udelay(100);
++		if (gotgctl.b.hstnegscs) {
++			if (dwc_otg_is_host_mode(core_if)) {
++				core_if->op_state = B_HOST;
++				/*
++				 * Need to disable SOF interrupt immediately.
++				 * When switching from device to host, the PCD
++				 * interrupt handler won't handle the
++				 * interrupt if host mode is already set. The
++				 * HCD interrupt handler won't get called if
++				 * the HCD state is HALT. This means that the
++				 * interrupt does not get handled and Linux
++				 * complains loudly.
++				 */
++				gintmsk.d32 = 0;
++				gintmsk.b.sofintr = 1;
++				DWC_MODIFY_REG32(&global_regs->gintmsk,
++						 gintmsk.d32, 0);
++				/* Call callback function with spin lock released */
++				DWC_SPINUNLOCK(core_if->lock);
++				cil_pcd_stop(core_if);
++				/*
++				 * Initialize the Core for Host mode.
++				 */
++				cil_hcd_start(core_if);
++				DWC_SPINLOCK(core_if->lock);
++				core_if->op_state = B_HOST;
++			}
++		} else {
++			gotgctl.d32 = 0;
++			gotgctl.b.hnpreq = 1;
++			gotgctl.b.devhnpen = 1;
++			DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0);
++			DWC_DEBUGPL(DBG_ANY, "HNP Failed\n");
++			__DWC_ERROR("Device Not Connected/Responding\n");
++		}
++	}
++	if (gotgint.b.hstnegdet) {
++		/* The disconnect interrupt is set at the same time as
++		 * Host Negotiation Detected.  During the mode
++		 * switch all interrupts are cleared so the disconnect
++		 * interrupt handler will not get executed.
++		 */
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "Host Negotiation Detected++ (%s)\n",
++			    (dwc_otg_is_host_mode(core_if) ? "Host" :
++			     "Device"));
++		if (dwc_otg_is_device_mode(core_if)) {
++			DWC_DEBUGPL(DBG_ANY, "a_suspend->a_peripheral (%d)\n",
++				    core_if->op_state);
++			DWC_SPINUNLOCK(core_if->lock);
++			cil_hcd_disconnect(core_if);
++			cil_pcd_start(core_if);
++			DWC_SPINLOCK(core_if->lock);
++			core_if->op_state = A_PERIPHERAL;
++		} else {
++			/*
++			 * Need to disable SOF interrupt immediately. When
++			 * switching from device to host, the PCD interrupt
++			 * handler won't handle the interrupt if host mode is
++			 * already set. The HCD interrupt handler won't get
++			 * called if the HCD state is HALT. This means that
++			 * the interrupt does not get handled and Linux
++			 * complains loudly.
++			 */
++			gintmsk.d32 = 0;
++			gintmsk.b.sofintr = 1;
++			DWC_MODIFY_REG32(&global_regs->gintmsk, gintmsk.d32, 0);
++			DWC_SPINUNLOCK(core_if->lock);
++			cil_pcd_stop(core_if);
++			cil_hcd_start(core_if);
++			DWC_SPINLOCK(core_if->lock);
++			core_if->op_state = A_HOST;
++		}
++	}
++	if (gotgint.b.adevtoutchng) {
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "A-Device Timeout Change++\n");
++	}
++	if (gotgint.b.debdone) {
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " "Debounce Done++\n");
++	}
++
++	/* Clear GOTGINT */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gotgint, gotgint.d32);
++
++	return 1;
++}
++
++void w_conn_id_status_change(void *p)
++{
++	dwc_otg_core_if_t *core_if = p;
++	uint32_t count = 0;
++	gotgctl_data_t gotgctl = {.d32 = 0 };
++
++	gotgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
++	DWC_DEBUGPL(DBG_CIL, "gotgctl=%0x\n", gotgctl.d32);
++	DWC_DEBUGPL(DBG_CIL, "gotgctl.b.conidsts=%d\n", gotgctl.b.conidsts);
++
++	/* B-Device connector (Device Mode) */
++	if (gotgctl.b.conidsts) {
++		/* Wait for switch to device mode. */
++		while (!dwc_otg_is_device_mode(core_if)) {
++			DWC_PRINTF("Waiting for Peripheral Mode, Mode=%s\n",
++				   (dwc_otg_is_host_mode(core_if) ? "Host" :
++				    "Peripheral"));
++			dwc_mdelay(100);
++			if (++count > 10000)
++				break;
++		}
++		DWC_ASSERT(++count < 10000,
++			   "Connection id status change timed out");
++		core_if->op_state = B_PERIPHERAL;
++		dwc_otg_core_init(core_if);
++		dwc_otg_enable_global_interrupts(core_if);
++		cil_pcd_start(core_if);
++	} else {
++		/* A-Device connector (Host Mode) */
++		while (!dwc_otg_is_host_mode(core_if)) {
++			DWC_PRINTF("Waiting for Host Mode, Mode=%s\n",
++				   (dwc_otg_is_host_mode(core_if) ? "Host" :
++				    "Peripheral"));
++			dwc_mdelay(100);
++			if (++count > 10000)
++				break;
++		}
++		DWC_ASSERT(++count < 10000,
++			   "Connection id status change timed out");
++		core_if->op_state = A_HOST;
++		/*
++		 * Initialize the Core for Host mode.
++		 */
++		dwc_otg_core_init(core_if);
++		dwc_otg_enable_global_interrupts(core_if);
++		cil_hcd_start(core_if);
++	}
++}
++
++/**
++ * This function handles the Connector ID Status Change Interrupt.  It
++ * reads the OTG Interrupt Register (GOTCTL) to determine whether this
++ * is a Device to Host Mode transition or a Host Mode to Device
++ * Transition.
++ *
++ * This only occurs when the cable is connected/removed from the PHY
++ * connector.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_conn_id_status_change_intr(dwc_otg_core_if_t * core_if)
++{
++
++	/*
++	 * Need to disable SOF interrupt immediately. If switching from device
++	 * to host, the PCD interrupt handler won't handle the interrupt if
++	 * host mode is already set. The HCD interrupt handler won't get
++	 * called if the HCD state is HALT. This means that the interrupt does
++	 * not get handled and Linux complains loudly.
++	 */
++	gintmsk_data_t gintmsk = {.d32 = 0 };
++	gintsts_data_t gintsts = {.d32 = 0 };
++
++	gintmsk.b.sofintr = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
++
++	DWC_DEBUGPL(DBG_CIL,
++		    " ++Connector ID Status Change Interrupt++  (%s)\n",
++		    (dwc_otg_is_host_mode(core_if) ? "Host" : "Device"));
++
++	DWC_SPINUNLOCK(core_if->lock);
++
++	/*
++	 * Need to schedule a work, as there are possible DELAY function calls
++	 * Release lock before scheduling workq as it holds spinlock during scheduling
++	 */
++
++	DWC_WORKQ_SCHEDULE(core_if->wq_otg, w_conn_id_status_change,
++			   core_if, "connection id status change");
++	DWC_SPINLOCK(core_if->lock);
++
++	/* Set flag and clear interrupt */
++	gintsts.b.conidstschng = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates that a device is initiating the Session
++ * Request Protocol to request the host to turn on bus power so a new
++ * session can begin. The handler responds by turning on bus power. If
++ * the DWC_otg controller is in low power mode, the handler brings the
++ * controller out of low power mode before turning on bus power.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_session_req_intr(dwc_otg_core_if_t * core_if)
++{
++	gintsts_data_t gintsts;
++
++#ifndef DWC_HOST_ONLY
++	DWC_DEBUGPL(DBG_ANY, "++Session Request Interrupt++\n");
++
++	if (dwc_otg_is_device_mode(core_if)) {
++		DWC_PRINTF("SRP: Device mode\n");
++	} else {
++		hprt0_data_t hprt0;
++		DWC_PRINTF("SRP: Host mode\n");
++
++		/* Turn on the port power bit. */
++		hprt0.d32 = dwc_otg_read_hprt0(core_if);
++		hprt0.b.prtpwr = 1;
++		DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++
++		/* Start the Connection timer. So a message can be displayed
++		 * if connect does not occur within 10 seconds. */
++		cil_hcd_session_start(core_if);
++	}
++#endif
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.sessreqintr = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++void w_wakeup_detected(void *p)
++{
++	dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) p;
++	/*
++	 * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms
++	 * so that OPT tests pass with all PHYs).
++	 */
++	hprt0_data_t hprt0 = {.d32 = 0 };
++#if 0
++	pcgcctl_data_t pcgcctl = {.d32 = 0 };
++	/* Restart the Phy Clock */
++	pcgcctl.b.stoppclk = 1;
++	DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
++	dwc_udelay(10);
++#endif //0
++	hprt0.d32 = dwc_otg_read_hprt0(core_if);
++	DWC_DEBUGPL(DBG_ANY, "Resume: HPRT0=%0x\n", hprt0.d32);
++//      dwc_mdelay(70);
++	hprt0.b.prtres = 0;	/* Resume */
++	DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++	DWC_DEBUGPL(DBG_ANY, "Clear Resume: HPRT0=%0x\n",
++		    DWC_READ_REG32(core_if->host_if->hprt0));
++
++	cil_hcd_resume(core_if);
++
++	/** Change to L0 state*/
++	core_if->lx_state = DWC_OTG_L0;
++}
++
++/**
++ * This interrupt indicates that the DWC_otg controller has detected a
++ * resume or remote wakeup sequence. If the DWC_otg controller is in
++ * low power mode, the handler must brings the controller out of low
++ * power mode. The controller automatically begins resume
++ * signaling. The handler schedules a time to stop resume signaling.
++ */
++int32_t dwc_otg_handle_wakeup_detected_intr(dwc_otg_core_if_t * core_if)
++{
++	gintsts_data_t gintsts;
++
++	DWC_DEBUGPL(DBG_ANY,
++		    "++Resume and Remote Wakeup Detected Interrupt++\n");
++
++	DWC_PRINTF("%s lxstate = %d\n", __func__, core_if->lx_state);
++
++	if (dwc_otg_is_device_mode(core_if)) {
++		dctl_data_t dctl = {.d32 = 0 };
++		DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n",
++			    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->
++					   dsts));
++		if (core_if->lx_state == DWC_OTG_L2) {
++#ifdef PARTIAL_POWER_DOWN
++			if (core_if->hwcfg4.b.power_optimiz) {
++				pcgcctl_data_t power = {.d32 = 0 };
++
++				power.d32 = DWC_READ_REG32(core_if->pcgcctl);
++				DWC_DEBUGPL(DBG_CIL, "PCGCCTL=%0x\n",
++					    power.d32);
++
++				power.b.stoppclk = 0;
++				DWC_WRITE_REG32(core_if->pcgcctl, power.d32);
++
++				power.b.pwrclmp = 0;
++				DWC_WRITE_REG32(core_if->pcgcctl, power.d32);
++
++				power.b.rstpdwnmodule = 0;
++				DWC_WRITE_REG32(core_if->pcgcctl, power.d32);
++			}
++#endif
++			/* Clear the Remote Wakeup Signaling */
++			dctl.b.rmtwkupsig = 1;
++			DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
++					 dctl, dctl.d32, 0);
++
++			DWC_SPINUNLOCK(core_if->lock);
++			if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
++				core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
++			}
++			DWC_SPINLOCK(core_if->lock);
++		} else {
++			glpmcfg_data_t lpmcfg;
++			lpmcfg.d32 =
++			    DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++			lpmcfg.b.hird_thres &= (~(1 << 4));
++			DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg,
++					lpmcfg.d32);
++		}
++		/** Change to L0 state*/
++		core_if->lx_state = DWC_OTG_L0;
++	} else {
++		if (core_if->lx_state != DWC_OTG_L1) {
++			pcgcctl_data_t pcgcctl = {.d32 = 0 };
++
++			/* Restart the Phy Clock */
++			pcgcctl.b.stoppclk = 1;
++			DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
++			DWC_TIMER_SCHEDULE(core_if->wkp_timer, 71);
++		} else {
++			/** Change to L0 state*/
++			core_if->lx_state = DWC_OTG_L0;
++		}
++	}
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.wkupintr = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates that the Wakeup Logic has detected a
++ * Device disconnect.
++ */
++static int32_t dwc_otg_handle_pwrdn_disconnect_intr(dwc_otg_core_if_t *core_if)
++{
++	gpwrdn_data_t gpwrdn = { .d32 = 0 };
++	gpwrdn_data_t gpwrdn_temp = { .d32 = 0 };
++	gpwrdn_temp.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++
++	DWC_PRINTF("%s called\n", __FUNCTION__);
++
++	if (!core_if->hibernation_suspend) {
++		DWC_PRINTF("Already exited from Hibernation\n");
++		return 1;
++	}
++
++	/* Switch on the voltage to the core */
++	gpwrdn.b.pwrdnswtch = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Reset the core */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Disable power clamps*/
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnclmp = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	/* Remove reset the core signal */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++	dwc_udelay(10);
++
++	/* Disable PMU interrupt */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuintsel = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	core_if->hibernation_suspend = 0;
++
++	/* Disable PMU */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuactv = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	if (gpwrdn_temp.b.idsts) {
++		core_if->op_state = B_PERIPHERAL;
++		dwc_otg_core_init(core_if);
++		dwc_otg_enable_global_interrupts(core_if);
++		cil_pcd_start(core_if);
++	} else {
++		core_if->op_state = A_HOST;
++		dwc_otg_core_init(core_if);
++		dwc_otg_enable_global_interrupts(core_if);
++		cil_hcd_start(core_if);
++	}
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates that the Wakeup Logic has detected a
++ * remote wakeup sequence.
++ */
++static int32_t dwc_otg_handle_pwrdn_wakeup_detected_intr(dwc_otg_core_if_t * core_if)
++{
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++	DWC_DEBUGPL(DBG_ANY,
++		    "++Powerdown Remote Wakeup Detected Interrupt++\n");
++
++	if (!core_if->hibernation_suspend) {
++		DWC_PRINTF("Already exited from Hibernation\n");
++		return 1;
++	}
++
++	gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++	if (gpwrdn.b.idsts) {	// Device Mode
++		if ((core_if->power_down == 2)
++		    && (core_if->hibernation_suspend == 1)) {
++			dwc_otg_device_hibernation_restore(core_if, 0, 0);
++		}
++	} else {
++		if ((core_if->power_down == 2)
++		    && (core_if->hibernation_suspend == 1)) {
++			dwc_otg_host_hibernation_restore(core_if, 1, 0);
++		}
++	}
++	return 1;
++}
++
++static int32_t dwc_otg_handle_pwrdn_idsts_change(dwc_otg_device_t *otg_dev)
++{
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++	gpwrdn_data_t gpwrdn_temp = {.d32 = 0 };
++	dwc_otg_core_if_t *core_if = otg_dev->core_if;
++
++	DWC_DEBUGPL(DBG_ANY, "%s called\n", __FUNCTION__);
++	gpwrdn_temp.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++	if (core_if->power_down == 2) {
++		if (!core_if->hibernation_suspend) {
++			DWC_PRINTF("Already exited from Hibernation\n");
++			return 1;
++		}
++		DWC_DEBUGPL(DBG_ANY, "Exit from hibernation on ID sts change\n");
++		/* Switch on the voltage to the core */
++		gpwrdn.b.pwrdnswtch = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		dwc_udelay(10);
++
++		/* Reset the core */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pwrdnrstn = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		dwc_udelay(10);
++
++		/* Disable power clamps */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pwrdnclmp = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++		/* Remove reset the core signal */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pwrdnrstn = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++		dwc_udelay(10);
++
++		/* Disable PMU interrupt */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pmuintsel = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++		/*Indicates that we are exiting from hibernation */
++		core_if->hibernation_suspend = 0;
++
++		/* Disable PMU */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pmuactv = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		dwc_udelay(10);
++
++		gpwrdn.d32 = core_if->gr_backup->gpwrdn_local;
++		if (gpwrdn.b.dis_vbus == 1) {
++			gpwrdn.d32 = 0;
++			gpwrdn.b.dis_vbus = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		}
++
++		if (gpwrdn_temp.b.idsts) {
++			core_if->op_state = B_PERIPHERAL;
++			dwc_otg_core_init(core_if);
++			dwc_otg_enable_global_interrupts(core_if);
++			cil_pcd_start(core_if);
++		} else {
++			core_if->op_state = A_HOST;
++			dwc_otg_core_init(core_if);
++			dwc_otg_enable_global_interrupts(core_if);
++			cil_hcd_start(core_if);
++		}
++	}
++
++	if (core_if->adp_enable) {
++		uint8_t is_host = 0;
++		DWC_SPINUNLOCK(core_if->lock);
++		/* Change the core_if's lock to hcd/pcd lock depend on mode? */
++#ifndef DWC_HOST_ONLY
++		if (gpwrdn_temp.b.idsts)
++			core_if->lock = otg_dev->pcd->lock;
++#endif
++#ifndef DWC_DEVICE_ONLY
++		if (!gpwrdn_temp.b.idsts) {
++				core_if->lock = otg_dev->hcd->lock;
++				is_host = 1;
++		}
++#endif
++		DWC_PRINTF("RESTART ADP\n");
++		if (core_if->adp.probe_enabled)
++			dwc_otg_adp_probe_stop(core_if);
++		if (core_if->adp.sense_enabled)
++			dwc_otg_adp_sense_stop(core_if);
++		if (core_if->adp.sense_timer_started)
++			DWC_TIMER_CANCEL(core_if->adp.sense_timer);
++		if (core_if->adp.vbuson_timer_started)
++			DWC_TIMER_CANCEL(core_if->adp.vbuson_timer);
++		core_if->adp.probe_timer_values[0] = -1;
++		core_if->adp.probe_timer_values[1] = -1;
++		core_if->adp.sense_timer_started = 0;
++		core_if->adp.vbuson_timer_started = 0;
++		core_if->adp.probe_counter = 0;
++		core_if->adp.gpwrdn = 0;
++
++		/* Disable PMU and restart ADP */
++		gpwrdn_temp.d32 = 0;
++		gpwrdn_temp.b.pmuactv = 1;
++		gpwrdn_temp.b.pmuintsel = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		DWC_PRINTF("Check point 1\n");
++		dwc_mdelay(110);
++		dwc_otg_adp_start(core_if, is_host);
++		DWC_SPINLOCK(core_if->lock);
++	}
++
++
++	return 1;
++}
++
++static int32_t dwc_otg_handle_pwrdn_session_change(dwc_otg_core_if_t * core_if)
++{
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++	int32_t otg_cap_param = core_if->core_params->otg_cap;
++	DWC_DEBUGPL(DBG_ANY, "%s called\n", __FUNCTION__);
++
++	gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++	if (core_if->power_down == 2) {
++		if (!core_if->hibernation_suspend) {
++			DWC_PRINTF("Already exited from Hibernation\n");
++			return 1;
++		}
++
++		if ((otg_cap_param != DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE ||
++			 otg_cap_param != DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE) &&
++			gpwrdn.b.bsessvld == 0) {
++			/* Save gpwrdn register for further usage if stschng interrupt */
++			core_if->gr_backup->gpwrdn_local =
++				DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++			/*Exit from ISR and wait for stschng interrupt with bsessvld = 1 */
++			return 1;
++		}
++
++		/* Switch on the voltage to the core */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pwrdnswtch = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		dwc_udelay(10);
++
++		/* Reset the core */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pwrdnrstn = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		dwc_udelay(10);
++
++		/* Disable power clamps */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pwrdnclmp = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++		/* Remove reset the core signal */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pwrdnrstn = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++		dwc_udelay(10);
++
++		/* Disable PMU interrupt */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pmuintsel = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		dwc_udelay(10);
++
++		/*Indicates that we are exiting from hibernation */
++		core_if->hibernation_suspend = 0;
++
++		/* Disable PMU */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pmuactv = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		dwc_udelay(10);
++
++		core_if->op_state = B_PERIPHERAL;
++		dwc_otg_core_init(core_if);
++		dwc_otg_enable_global_interrupts(core_if);
++		cil_pcd_start(core_if);
++
++		if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE ||
++			otg_cap_param == DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE) {
++			/*
++			 * Initiate SRP after initial ADP probe.
++			 */
++			dwc_otg_initiate_srp(core_if);
++		}
++	}
++
++	return 1;
++}
++/**
++ * This interrupt indicates that the Wakeup Logic has detected a
++ * status change either on IDDIG or BSessVld.
++ */
++static uint32_t dwc_otg_handle_pwrdn_stschng_intr(dwc_otg_device_t *otg_dev)
++{
++	int retval;
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++	gpwrdn_data_t gpwrdn_temp = {.d32 = 0 };
++	dwc_otg_core_if_t *core_if = otg_dev->core_if;
++
++	DWC_PRINTF("%s called\n", __FUNCTION__);
++
++	if (core_if->power_down == 2) {
++		if (core_if->hibernation_suspend <= 0) {
++			DWC_PRINTF("Already exited from Hibernation\n");
++			return 1;
++		} else
++			gpwrdn_temp.d32 = core_if->gr_backup->gpwrdn_local;
++
++	} else {
++		gpwrdn_temp.d32 = core_if->adp.gpwrdn;
++	}
++
++	gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++
++	if (gpwrdn.b.idsts ^ gpwrdn_temp.b.idsts) {
++		retval = dwc_otg_handle_pwrdn_idsts_change(otg_dev);
++	} else if (gpwrdn.b.bsessvld ^ gpwrdn_temp.b.bsessvld) {
++		retval = dwc_otg_handle_pwrdn_session_change(core_if);
++	}
++
++	return retval;
++}
++
++/**
++ * This interrupt indicates that the Wakeup Logic has detected a
++ * SRP.
++ */
++static int32_t dwc_otg_handle_pwrdn_srp_intr(dwc_otg_core_if_t * core_if)
++{
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++
++	DWC_PRINTF("%s called\n", __FUNCTION__);
++
++	if (!core_if->hibernation_suspend) {
++		DWC_PRINTF("Already exited from Hibernation\n");
++		return 1;
++	}
++#ifdef DWC_DEV_SRPCAP
++	if (core_if->pwron_timer_started) {
++		core_if->pwron_timer_started = 0;
++		DWC_TIMER_CANCEL(core_if->pwron_timer);
++	}
++#endif
++
++	/* Switch on the voltage to the core */
++	gpwrdn.b.pwrdnswtch = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Reset the core */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Disable power clamps */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnclmp = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	/* Remove reset the core signal */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++	dwc_udelay(10);
++
++	/* Disable PMU interrupt */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuintsel = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	/* Indicates that we are exiting from hibernation */
++	core_if->hibernation_suspend = 0;
++
++	/* Disable PMU */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuactv = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Programm Disable VBUS to 0 */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.dis_vbus = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	/*Initialize the core as Host */
++	core_if->op_state = A_HOST;
++	dwc_otg_core_init(core_if);
++	dwc_otg_enable_global_interrupts(core_if);
++	cil_hcd_start(core_if);
++
++	return 1;
++}
++
++/** This interrupt indicates that restore command after Hibernation
++ * was completed by the core. */
++int32_t dwc_otg_handle_restore_done_intr(dwc_otg_core_if_t * core_if)
++{
++	pcgcctl_data_t pcgcctl;
++	DWC_DEBUGPL(DBG_ANY, "++Restore Done Interrupt++\n");
++
++	//TODO De-assert restore signal. 8.a
++	pcgcctl.d32 = DWC_READ_REG32(core_if->pcgcctl);
++	if (pcgcctl.b.restoremode == 1) {
++		gintmsk_data_t gintmsk = {.d32 = 0 };
++		/*
++		 * If restore mode is Remote Wakeup,
++		 * unmask Remote Wakeup interrupt.
++		 */
++		gintmsk.b.wkupintr = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk,
++				 0, gintmsk.d32);
++	}
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates that a device has been disconnected from
++ * the root port.
++ */
++int32_t dwc_otg_handle_disconnect_intr(dwc_otg_core_if_t * core_if)
++{
++	gintsts_data_t gintsts;
++
++	DWC_DEBUGPL(DBG_ANY, "++Disconnect Detected Interrupt++ (%s) %s\n",
++		    (dwc_otg_is_host_mode(core_if) ? "Host" : "Device"),
++		    op_state_str(core_if));
++
++/** @todo Consolidate this if statement. */
++#ifndef DWC_HOST_ONLY
++	if (core_if->op_state == B_HOST) {
++		/* If in device mode Disconnect and stop the HCD, then
++		 * start the PCD. */
++		DWC_SPINUNLOCK(core_if->lock);
++		cil_hcd_disconnect(core_if);
++		cil_pcd_start(core_if);
++		DWC_SPINLOCK(core_if->lock);
++		core_if->op_state = B_PERIPHERAL;
++	} else if (dwc_otg_is_device_mode(core_if)) {
++		gotgctl_data_t gotgctl = {.d32 = 0 };
++		gotgctl.d32 =
++		    DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
++		if (gotgctl.b.hstsethnpen == 1) {
++			/* Do nothing, if HNP in process the OTG
++			 * interrupt "Host Negotiation Detected"
++			 * interrupt will do the mode switch.
++			 */
++		} else if (gotgctl.b.devhnpen == 0) {
++			/* If in device mode Disconnect and stop the HCD, then
++			 * start the PCD. */
++			DWC_SPINUNLOCK(core_if->lock);
++			cil_hcd_disconnect(core_if);
++			cil_pcd_start(core_if);
++			DWC_SPINLOCK(core_if->lock);
++			core_if->op_state = B_PERIPHERAL;
++		} else {
++			DWC_DEBUGPL(DBG_ANY, "!a_peripheral && !devhnpen\n");
++		}
++	} else {
++		if (core_if->op_state == A_HOST) {
++			/* A-Cable still connected but device disconnected. */
++			cil_hcd_disconnect(core_if);
++			if (core_if->adp_enable) {
++				gpwrdn_data_t gpwrdn = { .d32 = 0 };
++				cil_hcd_stop(core_if);
++				/* Enable Power Down Logic */
++				gpwrdn.b.pmuintsel = 1;
++				gpwrdn.b.pmuactv = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++				dwc_otg_adp_probe_start(core_if);
++
++				/* Power off the core */
++				if (core_if->power_down == 2) {
++					gpwrdn.d32 = 0;
++					gpwrdn.b.pwrdnswtch = 1;
++					DWC_MODIFY_REG32
++					    (&core_if->core_global_regs->gpwrdn,
++					     gpwrdn.d32, 0);
++				}
++			}
++		}
++	}
++#endif
++	/* Change to L3(OFF) state */
++	core_if->lx_state = DWC_OTG_L3;
++
++	gintsts.d32 = 0;
++	gintsts.b.disconnect = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++	return 1;
++}
++
++/**
++ * This interrupt indicates that SUSPEND state has been detected on
++ * the USB.
++ *
++ * For HNP the USB Suspend interrupt signals the change from
++ * "a_peripheral" to "a_host".
++ *
++ * When power management is enabled the core will be put in low power
++ * mode.
++ */
++int32_t dwc_otg_handle_usb_suspend_intr(dwc_otg_core_if_t * core_if)
++{
++	dsts_data_t dsts;
++	gintsts_data_t gintsts;
++	dcfg_data_t dcfg;
++
++	DWC_DEBUGPL(DBG_ANY, "USB SUSPEND\n");
++
++	if (dwc_otg_is_device_mode(core_if)) {
++		/* Check the Device status register to determine if the Suspend
++		 * state is active. */
++		dsts.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
++		DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", dsts.d32);
++		DWC_DEBUGPL(DBG_PCD, "DSTS.Suspend Status=%d "
++			    "HWCFG4.power Optimize=%d\n",
++			    dsts.b.suspsts, core_if->hwcfg4.b.power_optimiz);
++
++#ifdef PARTIAL_POWER_DOWN
++/** @todo Add a module parameter for power management. */
++
++		if (dsts.b.suspsts && core_if->hwcfg4.b.power_optimiz) {
++			pcgcctl_data_t power = {.d32 = 0 };
++			DWC_DEBUGPL(DBG_CIL, "suspend\n");
++
++			power.b.pwrclmp = 1;
++			DWC_WRITE_REG32(core_if->pcgcctl, power.d32);
++
++			power.b.rstpdwnmodule = 1;
++			DWC_MODIFY_REG32(core_if->pcgcctl, 0, power.d32);
++
++			power.b.stoppclk = 1;
++			DWC_MODIFY_REG32(core_if->pcgcctl, 0, power.d32);
++
++		} else {
++			DWC_DEBUGPL(DBG_ANY, "disconnect?\n");
++		}
++#endif
++		/* PCD callback for suspend. Release the lock inside of callback function */
++		cil_pcd_suspend(core_if);
++		if (core_if->power_down == 2)
++		{
++			dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
++			DWC_DEBUGPL(DBG_ANY,"lx_state = %08x\n",core_if->lx_state);
++			DWC_DEBUGPL(DBG_ANY," device address = %08d\n",dcfg.b.devaddr);
++
++			if (core_if->lx_state != DWC_OTG_L3 && dcfg.b.devaddr) {
++				pcgcctl_data_t pcgcctl = {.d32 = 0 };
++				gpwrdn_data_t gpwrdn = {.d32 = 0 };
++				gusbcfg_data_t gusbcfg = {.d32 = 0 };
++
++				/* Change to L2(suspend) state */
++				core_if->lx_state = DWC_OTG_L2;
++
++				/* Clear interrupt in gintsts */
++				gintsts.d32 = 0;
++				gintsts.b.usbsuspend = 1;
++				DWC_WRITE_REG32(&core_if->core_global_regs->
++						gintsts, gintsts.d32);
++				DWC_PRINTF("Start of hibernation completed\n");
++				dwc_otg_save_global_regs(core_if);
++				dwc_otg_save_dev_regs(core_if);
++
++				gusbcfg.d32 =
++				    DWC_READ_REG32(&core_if->core_global_regs->
++						   gusbcfg);
++				if (gusbcfg.b.ulpi_utmi_sel == 1) {
++					/* ULPI interface */
++					/* Suspend the Phy Clock */
++					pcgcctl.d32 = 0;
++					pcgcctl.b.stoppclk = 1;
++					DWC_MODIFY_REG32(core_if->pcgcctl, 0,
++							 pcgcctl.d32);
++					dwc_udelay(10);
++					gpwrdn.b.pmuactv = 1;
++					DWC_MODIFY_REG32(&core_if->
++							 core_global_regs->
++							 gpwrdn, 0, gpwrdn.d32);
++				} else {
++					/* UTMI+ Interface */
++					gpwrdn.b.pmuactv = 1;
++					DWC_MODIFY_REG32(&core_if->
++							 core_global_regs->
++							 gpwrdn, 0, gpwrdn.d32);
++					dwc_udelay(10);
++					pcgcctl.b.stoppclk = 1;
++					DWC_MODIFY_REG32(core_if->pcgcctl, 0,
++							 pcgcctl.d32);
++					dwc_udelay(10);
++				}
++
++				/* Set flag to indicate that we are in hibernation */
++				core_if->hibernation_suspend = 1;
++				/* Enable interrupts from wake up logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pmuintsel = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++				dwc_udelay(10);
++
++				/* Unmask device mode interrupts in GPWRDN */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.rst_det_msk = 1;
++				gpwrdn.b.lnstchng_msk = 1;
++				gpwrdn.b.sts_chngint_msk = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++				dwc_udelay(10);
++
++				/* Enable Power Down Clamp */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pwrdnclmp = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++				dwc_udelay(10);
++
++				/* Switch off VDD */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pwrdnswtch = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++
++				/* Save gpwrdn register for further usage if stschng interrupt */
++				core_if->gr_backup->gpwrdn_local =
++							DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++				DWC_PRINTF("Hibernation completed\n");
++
++				return 1;
++			}
++		} else if (core_if->power_down == 3) {
++			pcgcctl_data_t pcgcctl = {.d32 = 0 };
++			dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
++			DWC_DEBUGPL(DBG_ANY, "lx_state = %08x\n",core_if->lx_state);
++			DWC_DEBUGPL(DBG_ANY, " device address = %08d\n",dcfg.b.devaddr);
++
++			if (core_if->lx_state != DWC_OTG_L3 && dcfg.b.devaddr) {
++				DWC_DEBUGPL(DBG_ANY, "Start entering to extended hibernation\n");
++				core_if->xhib = 1;
++
++				/* Clear interrupt in gintsts */
++				gintsts.d32 = 0;
++				gintsts.b.usbsuspend = 1;
++				DWC_WRITE_REG32(&core_if->core_global_regs->
++					gintsts, gintsts.d32);
++
++				dwc_otg_save_global_regs(core_if);
++				dwc_otg_save_dev_regs(core_if);
++
++				/* Wait for 10 PHY clocks */
++				dwc_udelay(10);
++
++				/* Program GPIO register while entering to xHib */
++				DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, 0x1);
++
++				pcgcctl.b.enbl_extnd_hiber = 1;
++				DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32);
++				DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32);
++
++				pcgcctl.d32 = 0;
++				pcgcctl.b.extnd_hiber_pwrclmp = 1;
++				DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32);
++
++				pcgcctl.d32 = 0;
++				pcgcctl.b.extnd_hiber_switch = 1;
++				core_if->gr_backup->xhib_gpwrdn = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++				core_if->gr_backup->xhib_pcgcctl = DWC_READ_REG32(core_if->pcgcctl) | pcgcctl.d32;
++				DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32);
++
++				DWC_DEBUGPL(DBG_ANY, "Finished entering to extended hibernation\n");
++
++				return 1;
++			}
++		}
++	} else {
++		if (core_if->op_state == A_PERIPHERAL) {
++			DWC_DEBUGPL(DBG_ANY, "a_peripheral->a_host\n");
++			/* Clear the a_peripheral flag, back to a_host. */
++			DWC_SPINUNLOCK(core_if->lock);
++			cil_pcd_stop(core_if);
++			cil_hcd_start(core_if);
++			DWC_SPINLOCK(core_if->lock);
++			core_if->op_state = A_HOST;
++		}
++	}
++
++	/* Change to L2(suspend) state */
++	core_if->lx_state = DWC_OTG_L2;
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.usbsuspend = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++static int32_t dwc_otg_handle_xhib_exit_intr(dwc_otg_core_if_t * core_if)
++{
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++	pcgcctl_data_t pcgcctl = {.d32 = 0 };
++	gahbcfg_data_t gahbcfg = {.d32 = 0 };
++
++	dwc_udelay(10);
++
++	/* Program GPIO register while entering to xHib */
++	DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, 0x0);
++
++	pcgcctl.d32 = core_if->gr_backup->xhib_pcgcctl;
++	pcgcctl.b.extnd_hiber_pwrclmp = 0;
++	DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
++	dwc_udelay(10);
++
++	gpwrdn.d32 = core_if->gr_backup->xhib_gpwrdn;
++	gpwrdn.b.restore = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32);
++	dwc_udelay(10);
++
++	restore_lpm_i2c_regs(core_if);
++
++	pcgcctl.d32 = core_if->gr_backup->pcgcctl_local & (0x3FFFF << 14);
++	pcgcctl.b.max_xcvrselect = 1;
++	pcgcctl.b.ess_reg_restored = 0;
++	pcgcctl.b.extnd_hiber_switch = 0;
++	pcgcctl.b.extnd_hiber_pwrclmp = 0;
++	pcgcctl.b.enbl_extnd_hiber = 1;
++	DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
++
++	gahbcfg.d32 = core_if->gr_backup->gahbcfg_local;
++	gahbcfg.b.glblintrmsk = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gahbcfg.d32);
++
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0x1 << 16);
++
++	DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg,
++			core_if->gr_backup->gusbcfg_local);
++	DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg,
++			core_if->dr_backup->dcfg);
++
++	pcgcctl.d32 = 0;
++	pcgcctl.d32 = core_if->gr_backup->pcgcctl_local & (0x3FFFF << 14);
++	pcgcctl.b.max_xcvrselect = 1;
++	pcgcctl.d32 |= 0x608;
++	DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
++	dwc_udelay(10);
++
++	pcgcctl.d32 = 0;
++	pcgcctl.d32 = core_if->gr_backup->pcgcctl_local & (0x3FFFF << 14);
++	pcgcctl.b.max_xcvrselect = 1;
++	pcgcctl.b.ess_reg_restored = 1;
++	pcgcctl.b.enbl_extnd_hiber = 1;
++	pcgcctl.b.rstpdwnmodule = 1;
++	pcgcctl.b.restoremode = 1;
++	DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
++
++	DWC_DEBUGPL(DBG_ANY, "%s called\n", __FUNCTION__);
++
++	return 1;
++}
++
++#ifdef CONFIG_USB_DWC_OTG_LPM
++/**
++ * This function hadles LPM transaction received interrupt.
++ */
++static int32_t dwc_otg_handle_lpm_intr(dwc_otg_core_if_t * core_if)
++{
++	glpmcfg_data_t lpmcfg;
++	gintsts_data_t gintsts;
++
++	if (!core_if->core_params->lpm_enable) {
++		DWC_PRINTF("Unexpected LPM interrupt\n");
++	}
++
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	DWC_PRINTF("LPM config register = 0x%08x\n", lpmcfg.d32);
++
++	if (dwc_otg_is_host_mode(core_if)) {
++		cil_hcd_sleep(core_if);
++	} else {
++		lpmcfg.b.hird_thres |= (1 << 4);
++		DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg,
++				lpmcfg.d32);
++	}
++
++	/* Examine prt_sleep_sts after TL1TokenTetry period max (10 us) */
++	dwc_udelay(10);
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	if (lpmcfg.b.prt_sleep_sts) {
++		/* Save the current state */
++		core_if->lx_state = DWC_OTG_L1;
++	}
++
++	/* Clear interrupt  */
++	gintsts.d32 = 0;
++	gintsts.b.lpmtranrcvd = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++	return 1;
++}
++#endif /* CONFIG_USB_DWC_OTG_LPM */
++
++/**
++ * This function returns the Core Interrupt register.
++ */
++static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t * core_if, gintmsk_data_t *reenable_gintmsk)
++{
++	gahbcfg_data_t gahbcfg = {.d32 = 0 };
++	gintsts_data_t gintsts;
++	gintmsk_data_t gintmsk;
++	gintmsk_data_t gintmsk_common = {.d32 = 0 };
++	gintmsk_common.b.wkupintr = 1;
++	gintmsk_common.b.sessreqintr = 1;
++	gintmsk_common.b.conidstschng = 1;
++	gintmsk_common.b.otgintr = 1;
++	gintmsk_common.b.modemismatch = 1;
++	gintmsk_common.b.disconnect = 1;
++	gintmsk_common.b.usbsuspend = 1;
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	gintmsk_common.b.lpmtranrcvd = 1;
++#endif
++	gintmsk_common.b.restoredone = 1;
++	if(dwc_otg_is_device_mode(core_if))
++	{
++		/** @todo: The port interrupt occurs while in device
++		 * mode. Added code to CIL to clear the interrupt for now!
++		 */
++		gintmsk_common.b.portintr = 1;
++	}
++	gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++	gintmsk.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk);
++	{
++		unsigned long flags;
++
++		// Re-enable the saved interrupts
++		local_irq_save(flags);
++		local_fiq_disable();
++		gintmsk.d32 |= gintmsk_common.d32;
++		gintsts_saved.d32 &= ~gintmsk_common.d32;
++		reenable_gintmsk->d32 = gintmsk.d32;
++		local_irq_restore(flags);
++	}
++
++	gahbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gahbcfg);
++
++#ifdef DEBUG
++	/* if any common interrupts set */
++	if (gintsts.d32 & gintmsk_common.d32) {
++		DWC_DEBUGPL(DBG_ANY, "common_intr: gintsts=%08x  gintmsk=%08x\n",
++			    gintsts.d32, gintmsk.d32);
++	}
++#endif
++	if (!fiq_fix_enable){
++		if (gahbcfg.b.glblintrmsk)
++			return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32);
++		else
++			return 0;
++	}
++	else {
++		return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32);
++	}
++
++}
++
++/* MACRO for clearing interupt bits in GPWRDN register */
++#define CLEAR_GPWRDN_INTR(__core_if,__intr) \
++do { \
++		gpwrdn_data_t gpwrdn = {.d32=0}; \
++		gpwrdn.b.__intr = 1; \
++		DWC_MODIFY_REG32(&__core_if->core_global_regs->gpwrdn, \
++		0, gpwrdn.d32); \
++} while (0)
++
++/**
++ * Common interrupt handler.
++ *
++ * The common interrupts are those that occur in both Host and Device mode.
++ * This handler handles the following interrupts:
++ * - Mode Mismatch Interrupt
++ * - Disconnect Interrupt
++ * - OTG Interrupt
++ * - Connector ID Status Change Interrupt
++ * - Session Request Interrupt.
++ * - Resume / Remote Wakeup Detected Interrupt.
++ * - LPM Transaction Received Interrupt
++ * - ADP Transaction Received Interrupt
++ *
++ */
++int32_t dwc_otg_handle_common_intr(void *dev)
++{
++	int retval = 0;
++	gintsts_data_t gintsts;
++	gintmsk_data_t reenable_gintmsk;
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++	dwc_otg_device_t *otg_dev = dev;
++	dwc_otg_core_if_t *core_if = otg_dev->core_if;
++	gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++	if (dwc_otg_is_device_mode(core_if))
++		core_if->frame_num = dwc_otg_get_frame_number(core_if);
++
++	if (core_if->lock)
++		DWC_SPINLOCK(core_if->lock);
++
++	if (core_if->power_down == 3 && core_if->xhib == 1) {
++		DWC_DEBUGPL(DBG_ANY, "Exiting from xHIB state\n");
++		retval |= dwc_otg_handle_xhib_exit_intr(core_if);
++		core_if->xhib = 2;
++		if (core_if->lock)
++			DWC_SPINUNLOCK(core_if->lock);
++
++		return retval;
++	}
++
++	if (core_if->hibernation_suspend <= 0) {
++		gintsts.d32 = dwc_otg_read_common_intr(core_if, &reenable_gintmsk);
++
++		if (gintsts.b.modemismatch) {
++			retval |= dwc_otg_handle_mode_mismatch_intr(core_if);
++		}
++		if (gintsts.b.otgintr) {
++			retval |= dwc_otg_handle_otg_intr(core_if);
++		}
++		if (gintsts.b.conidstschng) {
++			retval |=
++			    dwc_otg_handle_conn_id_status_change_intr(core_if);
++		}
++		if (gintsts.b.disconnect) {
++			retval |= dwc_otg_handle_disconnect_intr(core_if);
++		}
++		if (gintsts.b.sessreqintr) {
++			retval |= dwc_otg_handle_session_req_intr(core_if);
++		}
++		if (gintsts.b.wkupintr) {
++			retval |= dwc_otg_handle_wakeup_detected_intr(core_if);
++		}
++		if (gintsts.b.usbsuspend) {
++			retval |= dwc_otg_handle_usb_suspend_intr(core_if);
++		}
++#ifdef CONFIG_USB_DWC_OTG_LPM
++		if (gintsts.b.lpmtranrcvd) {
++			retval |= dwc_otg_handle_lpm_intr(core_if);
++		}
++#endif
++		if (gintsts.b.restoredone) {
++			gintsts.d32 = 0;
++	                if (core_if->power_down == 2)
++				core_if->hibernation_suspend = -1;
++			else if (core_if->power_down == 3 && core_if->xhib == 2) {
++				gpwrdn_data_t gpwrdn = {.d32 = 0 };
++				pcgcctl_data_t pcgcctl = {.d32 = 0 };
++				dctl_data_t dctl = {.d32 = 0 };
++
++				DWC_WRITE_REG32(&core_if->core_global_regs->
++						gintsts, 0xFFFFFFFF);
++
++				DWC_DEBUGPL(DBG_ANY,
++					    "RESTORE DONE generated\n");
++
++				gpwrdn.b.restore = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++				dwc_udelay(10);
++
++				pcgcctl.b.rstpdwnmodule = 1;
++				DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
++
++				DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, core_if->gr_backup->gusbcfg_local);
++				DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, core_if->dr_backup->dcfg);
++				DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, core_if->dr_backup->dctl);
++				dwc_udelay(50);
++
++				dctl.b.pwronprgdone = 1;
++				DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
++				dwc_udelay(10);
++
++				dwc_otg_restore_global_regs(core_if);
++				dwc_otg_restore_dev_regs(core_if, 0);
++
++				dctl.d32 = 0;
++				dctl.b.pwronprgdone = 1;
++				DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0);
++				dwc_udelay(10);
++
++				pcgcctl.d32 = 0;
++				pcgcctl.b.enbl_extnd_hiber = 1;
++				DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
++
++				/* The core will be in ON STATE */
++				core_if->lx_state = DWC_OTG_L0;
++				core_if->xhib = 0;
++
++				DWC_SPINUNLOCK(core_if->lock);
++				if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
++					core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
++				}
++				DWC_SPINLOCK(core_if->lock);
++
++			}
++
++			gintsts.b.restoredone = 1;
++			DWC_WRITE_REG32(&core_if->core_global_regs->gintsts,gintsts.d32);
++			DWC_PRINTF(" --Restore done interrupt received-- \n");
++			retval |= 1;
++		}
++		if (gintsts.b.portintr && dwc_otg_is_device_mode(core_if)) {
++			/* The port interrupt occurs while in device mode with HPRT0
++			 * Port Enable/Disable.
++			 */
++			gintsts.d32 = 0;
++			gintsts.b.portintr = 1;
++			DWC_WRITE_REG32(&core_if->core_global_regs->gintsts,gintsts.d32);
++			retval |= 1;
++			reenable_gintmsk.b.portintr = 1;
++
++		}
++
++		DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, reenable_gintmsk.d32);
++
++	} else {
++		DWC_DEBUGPL(DBG_ANY, "gpwrdn=%08x\n", gpwrdn.d32);
++
++		if (gpwrdn.b.disconn_det && gpwrdn.b.disconn_det_msk) {
++			CLEAR_GPWRDN_INTR(core_if, disconn_det);
++			if (gpwrdn.b.linestate == 0) {
++				dwc_otg_handle_pwrdn_disconnect_intr(core_if);
++			} else {
++				DWC_PRINTF("Disconnect detected while linestate is not 0\n");
++			}
++
++			retval |= 1;
++		}
++		if (gpwrdn.b.lnstschng && gpwrdn.b.lnstchng_msk) {
++			CLEAR_GPWRDN_INTR(core_if, lnstschng);
++			/* remote wakeup from hibernation */
++			if (gpwrdn.b.linestate == 2 || gpwrdn.b.linestate == 1) {
++				dwc_otg_handle_pwrdn_wakeup_detected_intr(core_if);
++			} else {
++				DWC_PRINTF("gpwrdn.linestate = %d\n", gpwrdn.b.linestate);
++			}
++			retval |= 1;
++		}
++		if (gpwrdn.b.rst_det && gpwrdn.b.rst_det_msk) {
++			CLEAR_GPWRDN_INTR(core_if, rst_det);
++			if (gpwrdn.b.linestate == 0) {
++				DWC_PRINTF("Reset detected\n");
++				retval |= dwc_otg_device_hibernation_restore(core_if, 0, 1);
++			}
++		}
++		if (gpwrdn.b.srp_det && gpwrdn.b.srp_det_msk) {
++			CLEAR_GPWRDN_INTR(core_if, srp_det);
++			dwc_otg_handle_pwrdn_srp_intr(core_if);
++			retval |= 1;
++		}
++	}
++	/* Handle ADP interrupt here */
++	if (gpwrdn.b.adp_int) {
++		DWC_PRINTF("ADP interrupt\n");
++		CLEAR_GPWRDN_INTR(core_if, adp_int);
++		dwc_otg_adp_handle_intr(core_if);
++		retval |= 1;
++	}
++	if (gpwrdn.b.sts_chngint && gpwrdn.b.sts_chngint_msk) {
++		DWC_PRINTF("STS CHNG interrupt asserted\n");
++		CLEAR_GPWRDN_INTR(core_if, sts_chngint);
++		dwc_otg_handle_pwrdn_stschng_intr(otg_dev);
++
++		retval |= 1;
++	}
++	if (core_if->lock)
++		DWC_SPINUNLOCK(core_if->lock);
++
++	return retval;
++}
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_core_if.h linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_core_if.h
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_core_if.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_core_if.h	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,705 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_core_if.h $
++ * $Revision: #13 $
++ * $Date: 2012/08/10 $
++ * $Change: 2047372 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#if !defined(__DWC_CORE_IF_H__)
++#define __DWC_CORE_IF_H__
++
++#include "dwc_os.h"
++
++/** @file
++ * This file defines DWC_OTG Core API
++ */
++
++struct dwc_otg_core_if;
++typedef struct dwc_otg_core_if dwc_otg_core_if_t;
++
++/** Maximum number of Periodic FIFOs */
++#define MAX_PERIO_FIFOS 15
++/** Maximum number of Periodic FIFOs */
++#define MAX_TX_FIFOS 15
++
++/** Maximum number of Endpoints/HostChannels */
++#define MAX_EPS_CHANNELS 16
++
++extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t * _reg_base_addr);
++extern void dwc_otg_core_init(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_cil_remove(dwc_otg_core_if_t * _core_if);
++
++extern void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t * _core_if);
++
++extern uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t * _core_if);
++extern uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t * _core_if);
++
++extern uint8_t dwc_otg_is_dma_enable(dwc_otg_core_if_t * core_if);
++
++/** This function should be called on every hardware interrupt. */
++extern int32_t dwc_otg_handle_common_intr(void *otg_dev);
++
++/** @name OTG Core Parameters */
++/** @{ */
++
++/**
++ * Specifies the OTG capabilities. The driver will automatically
++ * detect the value for this parameter if none is specified.
++ * 0 - HNP and SRP capable (default)
++ * 1 - SRP Only capable
++ * 2 - No HNP/SRP capable
++ */
++extern int dwc_otg_set_param_otg_cap(dwc_otg_core_if_t * core_if, int32_t val);
++extern int32_t dwc_otg_get_param_otg_cap(dwc_otg_core_if_t * core_if);
++#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0
++#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1
++#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2
++#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE
++
++extern int dwc_otg_set_param_opt(dwc_otg_core_if_t * core_if, int32_t val);
++extern int32_t dwc_otg_get_param_opt(dwc_otg_core_if_t * core_if);
++#define dwc_param_opt_default 1
++
++/**
++ * Specifies whether to use slave or DMA mode for accessing the data
++ * FIFOs. The driver will automatically detect the value for this
++ * parameter if none is specified.
++ * 0 - Slave
++ * 1 - DMA (default, if available)
++ */
++extern int dwc_otg_set_param_dma_enable(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_dma_enable(dwc_otg_core_if_t * core_if);
++#define dwc_param_dma_enable_default 1
++
++/**
++ * When DMA mode is enabled specifies whether to use
++ * address DMA or DMA Descritor mode for accessing the data
++ * FIFOs in device mode. The driver will automatically detect
++ * the value for this parameter if none is specified.
++ * 0 - address DMA
++ * 1 - DMA Descriptor(default, if available)
++ */
++extern int dwc_otg_set_param_dma_desc_enable(dwc_otg_core_if_t * core_if,
++					     int32_t val);
++extern int32_t dwc_otg_get_param_dma_desc_enable(dwc_otg_core_if_t * core_if);
++//#define dwc_param_dma_desc_enable_default 1
++#define dwc_param_dma_desc_enable_default 0 // Broadcom BCM2708
++
++/** The DMA Burst size (applicable only for External DMA
++ * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32)
++ */
++extern int dwc_otg_set_param_dma_burst_size(dwc_otg_core_if_t * core_if,
++					    int32_t val);
++extern int32_t dwc_otg_get_param_dma_burst_size(dwc_otg_core_if_t * core_if);
++#define dwc_param_dma_burst_size_default 32
++
++/**
++ * Specifies the maximum speed of operation in host and device mode.
++ * The actual speed depends on the speed of the attached device and
++ * the value of phy_type. The actual speed depends on the speed of the
++ * attached device.
++ * 0 - High Speed (default)
++ * 1 - Full Speed
++ */
++extern int dwc_otg_set_param_speed(dwc_otg_core_if_t * core_if, int32_t val);
++extern int32_t dwc_otg_get_param_speed(dwc_otg_core_if_t * core_if);
++#define dwc_param_speed_default 0
++#define DWC_SPEED_PARAM_HIGH 0
++#define DWC_SPEED_PARAM_FULL 1
++
++/** Specifies whether low power mode is supported when attached
++ *	to a Full Speed or Low Speed device in host mode.
++ * 0 - Don't support low power mode (default)
++ * 1 - Support low power mode
++ */
++extern int dwc_otg_set_param_host_support_fs_ls_low_power(dwc_otg_core_if_t *
++							  core_if, int32_t val);
++extern int32_t dwc_otg_get_param_host_support_fs_ls_low_power(dwc_otg_core_if_t
++							      * core_if);
++#define dwc_param_host_support_fs_ls_low_power_default 0
++
++/** Specifies the PHY clock rate in low power mode when connected to a
++ * Low Speed device in host mode. This parameter is applicable only if
++ * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS
++ * then defaults to 6 MHZ otherwise 48 MHZ.
++ *
++ * 0 - 48 MHz
++ * 1 - 6 MHz
++ */
++extern int dwc_otg_set_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t *
++						       core_if, int32_t val);
++extern int32_t dwc_otg_get_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t *
++							   core_if);
++#define dwc_param_host_ls_low_power_phy_clk_default 0
++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0
++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1
++
++/**
++ * 0 - Use cC FIFO size parameters
++ * 1 - Allow dynamic FIFO sizing (default)
++ */
++extern int dwc_otg_set_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if,
++						 int32_t val);
++extern int32_t dwc_otg_get_param_enable_dynamic_fifo(dwc_otg_core_if_t *
++						     core_if);
++#define dwc_param_enable_dynamic_fifo_default 1
++
++/** Total number of 4-byte words in the data FIFO memory. This
++ * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic
++ * Tx FIFOs.
++ * 32 to 32768 (default 8192)
++ * Note: The total FIFO memory depth in the FPGA configuration is 8192.
++ */
++extern int dwc_otg_set_param_data_fifo_size(dwc_otg_core_if_t * core_if,
++					    int32_t val);
++extern int32_t dwc_otg_get_param_data_fifo_size(dwc_otg_core_if_t * core_if);
++//#define dwc_param_data_fifo_size_default 8192
++#define dwc_param_data_fifo_size_default 0xFF0 // Broadcom BCM2708
++
++/** Number of 4-byte words in the Rx FIFO in device mode when dynamic
++ * FIFO sizing is enabled.
++ * 16 to 32768 (default 1064)
++ */
++extern int dwc_otg_set_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if,
++					      int32_t val);
++extern int32_t dwc_otg_get_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if);
++#define dwc_param_dev_rx_fifo_size_default 1064
++
++/** Number of 4-byte words in the non-periodic Tx FIFO in device mode
++ * when dynamic FIFO sizing is enabled.
++ * 16 to 32768 (default 1024)
++ */
++extern int dwc_otg_set_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t *
++						     core_if, int32_t val);
++extern int32_t dwc_otg_get_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t *
++							 core_if);
++#define dwc_param_dev_nperio_tx_fifo_size_default 1024
++
++/** Number of 4-byte words in each of the periodic Tx FIFOs in device
++ * mode when dynamic FIFO sizing is enabled.
++ * 4 to 768 (default 256)
++ */
++extern int dwc_otg_set_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if,
++						    int32_t val, int fifo_num);
++extern int32_t dwc_otg_get_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t *
++							core_if, int fifo_num);
++#define dwc_param_dev_perio_tx_fifo_size_default 256
++
++/** Number of 4-byte words in the Rx FIFO in host mode when dynamic
++ * FIFO sizing is enabled.
++ * 16 to 32768 (default 1024)
++ */
++extern int dwc_otg_set_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if,
++					       int32_t val);
++extern int32_t dwc_otg_get_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if);
++//#define dwc_param_host_rx_fifo_size_default 1024
++#define dwc_param_host_rx_fifo_size_default 774 // Broadcom BCM2708
++
++/** Number of 4-byte words in the non-periodic Tx FIFO in host mode
++ * when Dynamic FIFO sizing is enabled in the core.
++ * 16 to 32768 (default 1024)
++ */
++extern int dwc_otg_set_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t *
++						      core_if, int32_t val);
++extern int32_t dwc_otg_get_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t *
++							  core_if);
++//#define dwc_param_host_nperio_tx_fifo_size_default 1024
++#define dwc_param_host_nperio_tx_fifo_size_default 0x100 // Broadcom BCM2708
++
++/** Number of 4-byte words in the host periodic Tx FIFO when dynamic
++ * FIFO sizing is enabled.
++ * 16 to 32768 (default 1024)
++ */
++extern int dwc_otg_set_param_host_perio_tx_fifo_size(dwc_otg_core_if_t *
++						     core_if, int32_t val);
++extern int32_t dwc_otg_get_param_host_perio_tx_fifo_size(dwc_otg_core_if_t *
++							 core_if);
++//#define dwc_param_host_perio_tx_fifo_size_default 1024
++#define dwc_param_host_perio_tx_fifo_size_default 0x200 // Broadcom BCM2708
++
++/** The maximum transfer size supported in bytes.
++ * 2047 to 65,535  (default 65,535)
++ */
++extern int dwc_otg_set_param_max_transfer_size(dwc_otg_core_if_t * core_if,
++					       int32_t val);
++extern int32_t dwc_otg_get_param_max_transfer_size(dwc_otg_core_if_t * core_if);
++#define dwc_param_max_transfer_size_default 65535
++
++/** The maximum number of packets in a transfer.
++ * 15 to 511  (default 511)
++ */
++extern int dwc_otg_set_param_max_packet_count(dwc_otg_core_if_t * core_if,
++					      int32_t val);
++extern int32_t dwc_otg_get_param_max_packet_count(dwc_otg_core_if_t * core_if);
++#define dwc_param_max_packet_count_default 511
++
++/** The number of host channel registers to use.
++ * 1 to 16 (default 12)
++ * Note: The FPGA configuration supports a maximum of 12 host channels.
++ */
++extern int dwc_otg_set_param_host_channels(dwc_otg_core_if_t * core_if,
++					   int32_t val);
++extern int32_t dwc_otg_get_param_host_channels(dwc_otg_core_if_t * core_if);
++//#define dwc_param_host_channels_default 12
++#define dwc_param_host_channels_default 8 // Broadcom BCM2708
++
++/** The number of endpoints in addition to EP0 available for device
++ * mode operations.
++ * 1 to 15 (default 6 IN and OUT)
++ * Note: The FPGA configuration supports a maximum of 6 IN and OUT
++ * endpoints in addition to EP0.
++ */
++extern int dwc_otg_set_param_dev_endpoints(dwc_otg_core_if_t * core_if,
++					   int32_t val);
++extern int32_t dwc_otg_get_param_dev_endpoints(dwc_otg_core_if_t * core_if);
++#define dwc_param_dev_endpoints_default 6
++
++/**
++ * Specifies the type of PHY interface to use. By default, the driver
++ * will automatically detect the phy_type.
++ *
++ * 0 - Full Speed PHY
++ * 1 - UTMI+ (default)
++ * 2 - ULPI
++ */
++extern int dwc_otg_set_param_phy_type(dwc_otg_core_if_t * core_if, int32_t val);
++extern int32_t dwc_otg_get_param_phy_type(dwc_otg_core_if_t * core_if);
++#define DWC_PHY_TYPE_PARAM_FS 0
++#define DWC_PHY_TYPE_PARAM_UTMI 1
++#define DWC_PHY_TYPE_PARAM_ULPI 2
++#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI
++
++/**
++ * Specifies the UTMI+ Data Width. This parameter is
++ * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI
++ * PHY_TYPE, this parameter indicates the data width between
++ * the MAC and the ULPI Wrapper.) Also, this parameter is
++ * applicable only if the OTG_HSPHY_WIDTH cC parameter was set
++ * to "8 and 16 bits", meaning that the core has been
++ * configured to work at either data path width.
++ *
++ * 8 or 16 bits (default 16)
++ */
++extern int dwc_otg_set_param_phy_utmi_width(dwc_otg_core_if_t * core_if,
++					    int32_t val);
++extern int32_t dwc_otg_get_param_phy_utmi_width(dwc_otg_core_if_t * core_if);
++//#define dwc_param_phy_utmi_width_default 16
++#define dwc_param_phy_utmi_width_default 8 // Broadcom BCM2708
++
++/**
++ * Specifies whether the ULPI operates at double or single
++ * data rate. This parameter is only applicable if PHY_TYPE is
++ * ULPI.
++ *
++ * 0 - single data rate ULPI interface with 8 bit wide data
++ * bus (default)
++ * 1 - double data rate ULPI interface with 4 bit wide data
++ * bus
++ */
++extern int dwc_otg_set_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if,
++					  int32_t val);
++extern int32_t dwc_otg_get_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if);
++#define dwc_param_phy_ulpi_ddr_default 0
++
++/**
++ * Specifies whether to use the internal or external supply to
++ * drive the vbus with a ULPI phy.
++ */
++extern int dwc_otg_set_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if,
++					       int32_t val);
++extern int32_t dwc_otg_get_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if);
++#define DWC_PHY_ULPI_INTERNAL_VBUS 0
++#define DWC_PHY_ULPI_EXTERNAL_VBUS 1
++#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS
++
++/**
++ * Specifies whether to use the I2Cinterface for full speed PHY. This
++ * parameter is only applicable if PHY_TYPE is FS.
++ * 0 - No (default)
++ * 1 - Yes
++ */
++extern int dwc_otg_set_param_i2c_enable(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_i2c_enable(dwc_otg_core_if_t * core_if);
++#define dwc_param_i2c_enable_default 0
++
++extern int dwc_otg_set_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if);
++#define dwc_param_ulpi_fs_ls_default 0
++
++extern int dwc_otg_set_param_ts_dline(dwc_otg_core_if_t * core_if, int32_t val);
++extern int32_t dwc_otg_get_param_ts_dline(dwc_otg_core_if_t * core_if);
++#define dwc_param_ts_dline_default 0
++
++/**
++ * Specifies whether dedicated transmit FIFOs are
++ * enabled for non periodic IN endpoints in device mode
++ * 0 - No
++ * 1 - Yes
++ */
++extern int dwc_otg_set_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if,
++						 int32_t val);
++extern int32_t dwc_otg_get_param_en_multiple_tx_fifo(dwc_otg_core_if_t *
++						     core_if);
++#define dwc_param_en_multiple_tx_fifo_default 1
++
++/** Number of 4-byte words in each of the Tx FIFOs in device
++ * mode when dynamic FIFO sizing is enabled.
++ * 4 to 768 (default 256)
++ */
++extern int dwc_otg_set_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if,
++					      int fifo_num, int32_t val);
++extern int32_t dwc_otg_get_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if,
++						  int fifo_num);
++#define dwc_param_dev_tx_fifo_size_default 768
++
++/** Thresholding enable flag-
++ * bit 0 - enable non-ISO Tx thresholding
++ * bit 1 - enable ISO Tx thresholding
++ * bit 2 - enable Rx thresholding
++ */
++extern int dwc_otg_set_param_thr_ctl(dwc_otg_core_if_t * core_if, int32_t val);
++extern int32_t dwc_otg_get_thr_ctl(dwc_otg_core_if_t * core_if, int fifo_num);
++#define dwc_param_thr_ctl_default 0
++
++/** Thresholding length for Tx
++ * FIFOs in 32 bit DWORDs
++ */
++extern int dwc_otg_set_param_tx_thr_length(dwc_otg_core_if_t * core_if,
++					   int32_t val);
++extern int32_t dwc_otg_get_tx_thr_length(dwc_otg_core_if_t * core_if);
++#define dwc_param_tx_thr_length_default 64
++
++/** Thresholding length for Rx
++ *	FIFOs in 32 bit DWORDs
++ */
++extern int dwc_otg_set_param_rx_thr_length(dwc_otg_core_if_t * core_if,
++					   int32_t val);
++extern int32_t dwc_otg_get_rx_thr_length(dwc_otg_core_if_t * core_if);
++#define dwc_param_rx_thr_length_default 64
++
++/**
++ * Specifies whether LPM (Link Power Management) support is enabled
++ */
++extern int dwc_otg_set_param_lpm_enable(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_lpm_enable(dwc_otg_core_if_t * core_if);
++#define dwc_param_lpm_enable_default 1
++
++/**
++ * Specifies whether PTI enhancement is enabled
++ */
++extern int dwc_otg_set_param_pti_enable(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_pti_enable(dwc_otg_core_if_t * core_if);
++#define dwc_param_pti_enable_default 0
++
++/**
++ * Specifies whether MPI enhancement is enabled
++ */
++extern int dwc_otg_set_param_mpi_enable(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_mpi_enable(dwc_otg_core_if_t * core_if);
++#define dwc_param_mpi_enable_default 0
++
++/**
++ * Specifies whether ADP capability is enabled
++ */
++extern int dwc_otg_set_param_adp_enable(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_adp_enable(dwc_otg_core_if_t * core_if);
++#define dwc_param_adp_enable_default 0
++
++/**
++ * Specifies whether IC_USB capability is enabled
++ */
++
++extern int dwc_otg_set_param_ic_usb_cap(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_ic_usb_cap(dwc_otg_core_if_t * core_if);
++#define dwc_param_ic_usb_cap_default 0
++
++extern int dwc_otg_set_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if,
++					   int32_t val);
++extern int32_t dwc_otg_get_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if);
++#define dwc_param_ahb_thr_ratio_default 0
++
++extern int dwc_otg_set_param_power_down(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_power_down(dwc_otg_core_if_t * core_if);
++#define dwc_param_power_down_default 0
++
++extern int dwc_otg_set_param_reload_ctl(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_reload_ctl(dwc_otg_core_if_t * core_if);
++#define dwc_param_reload_ctl_default 0
++
++extern int dwc_otg_set_param_dev_out_nak(dwc_otg_core_if_t * core_if,
++										int32_t val);
++extern int32_t dwc_otg_get_param_dev_out_nak(dwc_otg_core_if_t * core_if);
++#define dwc_param_dev_out_nak_default 0
++
++extern int dwc_otg_set_param_cont_on_bna(dwc_otg_core_if_t * core_if,
++										 int32_t val);
++extern int32_t dwc_otg_get_param_cont_on_bna(dwc_otg_core_if_t * core_if);
++#define dwc_param_cont_on_bna_default 0
++
++extern int dwc_otg_set_param_ahb_single(dwc_otg_core_if_t * core_if,
++										 int32_t val);
++extern int32_t dwc_otg_get_param_ahb_single(dwc_otg_core_if_t * core_if);
++#define dwc_param_ahb_single_default 0
++
++extern int dwc_otg_set_param_otg_ver(dwc_otg_core_if_t * core_if, int32_t val);
++extern int32_t dwc_otg_get_param_otg_ver(dwc_otg_core_if_t * core_if);
++#define dwc_param_otg_ver_default 0
++
++/** @} */
++
++/** @name Access to registers and bit-fields */
++
++/**
++ * Dump core registers and SPRAM
++ */
++extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_dump_spram(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t * _core_if);
++
++/**
++ * Get host negotiation status.
++ */
++extern uint32_t dwc_otg_get_hnpstatus(dwc_otg_core_if_t * core_if);
++
++/**
++ * Get srp status
++ */
++extern uint32_t dwc_otg_get_srpstatus(dwc_otg_core_if_t * core_if);
++
++/**
++ * Set hnpreq bit in the GOTGCTL register.
++ */
++extern void dwc_otg_set_hnpreq(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get Content of SNPSID register.
++ */
++extern uint32_t dwc_otg_get_gsnpsid(dwc_otg_core_if_t * core_if);
++
++/**
++ * Get current mode.
++ * Returns 0 if in device mode, and 1 if in host mode.
++ */
++extern uint32_t dwc_otg_get_mode(dwc_otg_core_if_t * core_if);
++
++/**
++ * Get value of hnpcapable field in the GUSBCFG register
++ */
++extern uint32_t dwc_otg_get_hnpcapable(dwc_otg_core_if_t * core_if);
++/**
++ * Set value of hnpcapable field in the GUSBCFG register
++ */
++extern void dwc_otg_set_hnpcapable(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get value of srpcapable field in the GUSBCFG register
++ */
++extern uint32_t dwc_otg_get_srpcapable(dwc_otg_core_if_t * core_if);
++/**
++ * Set value of srpcapable field in the GUSBCFG register
++ */
++extern void dwc_otg_set_srpcapable(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get value of devspeed field in the DCFG register
++ */
++extern uint32_t dwc_otg_get_devspeed(dwc_otg_core_if_t * core_if);
++/**
++ * Set value of devspeed field in the DCFG register
++ */
++extern void dwc_otg_set_devspeed(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get the value of busconnected field from the HPRT0 register
++ */
++extern uint32_t dwc_otg_get_busconnected(dwc_otg_core_if_t * core_if);
++
++/**
++ * Gets the device enumeration Speed.
++ */
++extern uint32_t dwc_otg_get_enumspeed(dwc_otg_core_if_t * core_if);
++
++/**
++ * Get value of prtpwr field from the HPRT0 register
++ */
++extern uint32_t dwc_otg_get_prtpower(dwc_otg_core_if_t * core_if);
++
++/**
++ * Get value of flag indicating core state - hibernated or not
++ */
++extern uint32_t dwc_otg_get_core_state(dwc_otg_core_if_t * core_if);
++
++/**
++ * Set value of prtpwr field from the HPRT0 register
++ */
++extern void dwc_otg_set_prtpower(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get value of prtsusp field from the HPRT0 regsiter
++ */
++extern uint32_t dwc_otg_get_prtsuspend(dwc_otg_core_if_t * core_if);
++/**
++ * Set value of prtpwr field from the HPRT0 register
++ */
++extern void dwc_otg_set_prtsuspend(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get value of ModeChTimEn field from the HCFG regsiter
++ */
++extern uint32_t dwc_otg_get_mode_ch_tim(dwc_otg_core_if_t * core_if);
++/**
++ * Set value of ModeChTimEn field from the HCFG regsiter
++ */
++extern void dwc_otg_set_mode_ch_tim(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get value of Fram Interval field from the HFIR regsiter
++ */
++extern uint32_t dwc_otg_get_fr_interval(dwc_otg_core_if_t * core_if);
++/**
++ * Set value of Frame Interval field from the HFIR regsiter
++ */
++extern void dwc_otg_set_fr_interval(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Set value of prtres field from the HPRT0 register
++ *FIXME Remove?
++ */
++extern void dwc_otg_set_prtresume(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get value of rmtwkupsig bit in DCTL register
++ */
++extern uint32_t dwc_otg_get_remotewakesig(dwc_otg_core_if_t * core_if);
++
++/**
++ * Get value of prt_sleep_sts field from the GLPMCFG register
++ */
++extern uint32_t dwc_otg_get_lpm_portsleepstatus(dwc_otg_core_if_t * core_if);
++
++/**
++ * Get value of rem_wkup_en field from the GLPMCFG register
++ */
++extern uint32_t dwc_otg_get_lpm_remotewakeenabled(dwc_otg_core_if_t * core_if);
++
++/**
++ * Get value of appl_resp field from the GLPMCFG register
++ */
++extern uint32_t dwc_otg_get_lpmresponse(dwc_otg_core_if_t * core_if);
++/**
++ * Set value of appl_resp field from the GLPMCFG register
++ */
++extern void dwc_otg_set_lpmresponse(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get value of hsic_connect field from the GLPMCFG register
++ */
++extern uint32_t dwc_otg_get_hsic_connect(dwc_otg_core_if_t * core_if);
++/**
++ * Set value of hsic_connect field from the GLPMCFG register
++ */
++extern void dwc_otg_set_hsic_connect(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get value of inv_sel_hsic field from the GLPMCFG register.
++ */
++extern uint32_t dwc_otg_get_inv_sel_hsic(dwc_otg_core_if_t * core_if);
++/**
++ * Set value of inv_sel_hsic field from the GLPMFG register.
++ */
++extern void dwc_otg_set_inv_sel_hsic(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/*
++ * Some functions for accessing registers
++ */
++
++/**
++ *  GOTGCTL register
++ */
++extern uint32_t dwc_otg_get_gotgctl(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_set_gotgctl(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * GUSBCFG register
++ */
++extern uint32_t dwc_otg_get_gusbcfg(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_set_gusbcfg(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * GRXFSIZ register
++ */
++extern uint32_t dwc_otg_get_grxfsiz(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_set_grxfsiz(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * GNPTXFSIZ register
++ */
++extern uint32_t dwc_otg_get_gnptxfsiz(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_set_gnptxfsiz(dwc_otg_core_if_t * core_if, uint32_t val);
++
++extern uint32_t dwc_otg_get_gpvndctl(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_set_gpvndctl(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * GGPIO register
++ */
++extern uint32_t dwc_otg_get_ggpio(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_set_ggpio(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * GUID register
++ */
++extern uint32_t dwc_otg_get_guid(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_set_guid(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * HPRT0 register
++ */
++extern uint32_t dwc_otg_get_hprt0(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_set_hprt0(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * GHPTXFSIZE
++ */
++extern uint32_t dwc_otg_get_hptxfsiz(dwc_otg_core_if_t * core_if);
++
++/** @} */
++
++#endif				/* __DWC_CORE_IF_H__ */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_dbg.h linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_dbg.h
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_dbg.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_dbg.h	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,117 @@
++/* ==========================================================================
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#ifndef __DWC_OTG_DBG_H__
++#define __DWC_OTG_DBG_H__
++
++/** @file
++ * This file defines debug levels.
++ * Debugging support vanishes in non-debug builds.
++ */
++
++/**
++ * The Debug Level bit-mask variable.
++ */
++extern uint32_t g_dbg_lvl;
++/**
++ * Set the Debug Level variable.
++ */
++static inline uint32_t SET_DEBUG_LEVEL(const uint32_t new)
++{
++	uint32_t old = g_dbg_lvl;
++	g_dbg_lvl = new;
++	return old;
++}
++
++#define DBG_USER	(0x1)
++/** When debug level has the DBG_CIL bit set, display CIL Debug messages. */
++#define DBG_CIL		(0x2)
++/** When debug level has the DBG_CILV bit set, display CIL Verbose debug
++ * messages */
++#define DBG_CILV	(0x20)
++/**  When debug level has the DBG_PCD bit set, display PCD (Device) debug
++ *  messages */
++#define DBG_PCD		(0x4)
++/** When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug
++ * messages */
++#define DBG_PCDV	(0x40)
++/** When debug level has the DBG_HCD bit set, display Host debug messages */
++#define DBG_HCD		(0x8)
++/** When debug level has the DBG_HCDV bit set, display Verbose Host debug
++ * messages */
++#define DBG_HCDV	(0x80)
++/** When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host
++ *  mode. */
++#define DBG_HCD_URB	(0x800)
++/** When debug level has the DBG_HCDI bit set, display host interrupt
++ *  messages. */
++#define DBG_HCDI	(0x1000)
++
++/** When debug level has any bit set, display debug messages */
++#define DBG_ANY		(0xFF)
++
++/** All debug messages off */
++#define DBG_OFF		0
++
++/** Prefix string for DWC_DEBUG print macros. */
++#define USB_DWC "DWC_otg: "
++
++/**
++ * Print a debug message when the Global debug level variable contains
++ * the bit defined in <code>lvl</code>.
++ *
++ * @param[in] lvl - Debug level, use one of the DBG_ constants above.
++ * @param[in] x - like printf
++ *
++ *    Example:<p>
++ * <code>
++ *      DWC_DEBUGPL( DBG_ANY, "%s(%p)\n", __func__, _reg_base_addr);
++ * </code>
++ * <br>
++ * results in:<br>
++ * <code>
++ * usb-DWC_otg: dwc_otg_cil_init(ca867000)
++ * </code>
++ */
++#ifdef DEBUG
++
++# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)__DWC_DEBUG(USB_DWC x ); }while(0)
++# define DWC_DEBUGP(x...)	DWC_DEBUGPL(DBG_ANY, x )
++
++# define CHK_DEBUG_LEVEL(level) ((level) & g_dbg_lvl)
++
++#else
++
++# define DWC_DEBUGPL(lvl, x...) do{}while(0)
++# define DWC_DEBUGP(x...)
++
++# define CHK_DEBUG_LEVEL(level) (0)
++
++#endif /*DEBUG*/
++#endif
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_driver.c linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_driver.c
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_driver.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_driver.c	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,1742 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.c $
++ * $Revision: #92 $
++ * $Date: 2012/08/10 $
++ * $Change: 2047372 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ * The dwc_otg_driver module provides the initialization and cleanup entry
++ * points for the DWC_otg driver. This module will be dynamically installed
++ * after Linux is booted using the insmod command. When the module is
++ * installed, the dwc_otg_driver_init function is called. When the module is
++ * removed (using rmmod), the dwc_otg_driver_cleanup function is called.
++ *
++ * This module also defines a data structure for the dwc_otg_driver, which is
++ * used in conjunction with the standard ARM lm_device structure. These
++ * structures allow the OTG driver to comply with the standard Linux driver
++ * model in which devices and drivers are registered with a bus driver. This
++ * has the benefit that Linux can expose attributes of the driver and device
++ * in its special sysfs file system. Users can then read or write files in
++ * this file system to perform diagnostics on the driver components or the
++ * device.
++ */
++
++#include "dwc_otg_os_dep.h"
++#include "dwc_os.h"
++#include "dwc_otg_dbg.h"
++#include "dwc_otg_driver.h"
++#include "dwc_otg_attr.h"
++#include "dwc_otg_core_if.h"
++#include "dwc_otg_pcd_if.h"
++#include "dwc_otg_hcd_if.h"
++
++#define DWC_DRIVER_VERSION	"3.00a 10-AUG-2012"
++#define DWC_DRIVER_DESC		"HS OTG USB Controller driver"
++
++bool microframe_schedule=true;
++
++static const char dwc_driver_name[] = "dwc_otg";
++
++extern void* dummy_send;
++
++extern int pcd_init(
++#ifdef LM_INTERFACE
++			   struct lm_device *_dev
++#elif  defined(PCI_INTERFACE)
++			   struct pci_dev *_dev
++#elif  defined(PLATFORM_INTERFACE)
++	struct platform_device *dev
++#endif
++    );
++extern int hcd_init(
++#ifdef LM_INTERFACE
++			   struct lm_device *_dev
++#elif  defined(PCI_INTERFACE)
++			   struct pci_dev *_dev
++#elif  defined(PLATFORM_INTERFACE)
++	struct platform_device *dev
++#endif
++    );
++
++extern int pcd_remove(
++#ifdef LM_INTERFACE
++			     struct lm_device *_dev
++#elif  defined(PCI_INTERFACE)
++			     struct pci_dev *_dev
++#elif  defined(PLATFORM_INTERFACE)
++	struct platform_device *_dev
++#endif
++    );
++
++extern void hcd_remove(
++#ifdef LM_INTERFACE
++			      struct lm_device *_dev
++#elif  defined(PCI_INTERFACE)
++			      struct pci_dev *_dev
++#elif  defined(PLATFORM_INTERFACE)
++	struct platform_device *_dev
++#endif
++    );
++
++extern void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host);
++
++/*-------------------------------------------------------------------------*/
++/* Encapsulate the module parameter settings */
++
++struct dwc_otg_driver_module_params {
++	int32_t opt;
++	int32_t otg_cap;
++	int32_t dma_enable;
++	int32_t dma_desc_enable;
++	int32_t dma_burst_size;
++	int32_t speed;
++	int32_t host_support_fs_ls_low_power;
++	int32_t host_ls_low_power_phy_clk;
++	int32_t enable_dynamic_fifo;
++	int32_t data_fifo_size;
++	int32_t dev_rx_fifo_size;
++	int32_t dev_nperio_tx_fifo_size;
++	uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS];
++	int32_t host_rx_fifo_size;
++	int32_t host_nperio_tx_fifo_size;
++	int32_t host_perio_tx_fifo_size;
++	int32_t max_transfer_size;
++	int32_t max_packet_count;
++	int32_t host_channels;
++	int32_t dev_endpoints;
++	int32_t phy_type;
++	int32_t phy_utmi_width;
++	int32_t phy_ulpi_ddr;
++	int32_t phy_ulpi_ext_vbus;
++	int32_t i2c_enable;
++	int32_t ulpi_fs_ls;
++	int32_t ts_dline;
++	int32_t en_multiple_tx_fifo;
++	uint32_t dev_tx_fifo_size[MAX_TX_FIFOS];
++	uint32_t thr_ctl;
++	uint32_t tx_thr_length;
++	uint32_t rx_thr_length;
++	int32_t pti_enable;
++	int32_t mpi_enable;
++	int32_t lpm_enable;
++	int32_t ic_usb_cap;
++	int32_t ahb_thr_ratio;
++	int32_t power_down;
++	int32_t reload_ctl;
++	int32_t dev_out_nak;
++	int32_t cont_on_bna;
++	int32_t ahb_single;
++	int32_t otg_ver;
++	int32_t adp_enable;
++};
++
++static struct dwc_otg_driver_module_params dwc_otg_module_params = {
++	.opt = -1,
++	.otg_cap = -1,
++	.dma_enable = -1,
++	.dma_desc_enable = -1,
++	.dma_burst_size = -1,
++	.speed = -1,
++	.host_support_fs_ls_low_power = -1,
++	.host_ls_low_power_phy_clk = -1,
++	.enable_dynamic_fifo = -1,
++	.data_fifo_size = -1,
++	.dev_rx_fifo_size = -1,
++	.dev_nperio_tx_fifo_size = -1,
++	.dev_perio_tx_fifo_size = {
++				   /* dev_perio_tx_fifo_size_1 */
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1
++				   /* 15 */
++				   },
++	.host_rx_fifo_size = -1,
++	.host_nperio_tx_fifo_size = -1,
++	.host_perio_tx_fifo_size = -1,
++	.max_transfer_size = -1,
++	.max_packet_count = -1,
++	.host_channels = -1,
++	.dev_endpoints = -1,
++	.phy_type = -1,
++	.phy_utmi_width = -1,
++	.phy_ulpi_ddr = -1,
++	.phy_ulpi_ext_vbus = -1,
++	.i2c_enable = -1,
++	.ulpi_fs_ls = -1,
++	.ts_dline = -1,
++	.en_multiple_tx_fifo = -1,
++	.dev_tx_fifo_size = {
++			     /* dev_tx_fifo_size */
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1
++			     /* 15 */
++			     },
++	.thr_ctl = -1,
++	.tx_thr_length = -1,
++	.rx_thr_length = -1,
++	.pti_enable = -1,
++	.mpi_enable = -1,
++	.lpm_enable = 0,
++	.ic_usb_cap = -1,
++	.ahb_thr_ratio = -1,
++	.power_down = -1,
++	.reload_ctl = -1,
++	.dev_out_nak = -1,
++	.cont_on_bna = -1,
++	.ahb_single = -1,
++	.otg_ver = -1,
++	.adp_enable = -1,
++};
++
++//Global variable to switch the fiq fix on or off (declared in bcm2708.c)
++extern bool fiq_fix_enable;
++// Global variable to enable the split transaction fix
++bool fiq_split_enable = true;
++//Global variable to switch the nak holdoff on or off
++bool nak_holdoff_enable = true;
++
++
++/**
++ * This function shows the Driver Version.
++ */
++static ssize_t version_show(struct device_driver *dev, char *buf)
++{
++	return snprintf(buf, sizeof(DWC_DRIVER_VERSION) + 2, "%s\n",
++			DWC_DRIVER_VERSION);
++}
++
++static DRIVER_ATTR(version, S_IRUGO, version_show, NULL);
++
++/**
++ * Global Debug Level Mask.
++ */
++uint32_t g_dbg_lvl = 0;		/* OFF */
++
++/**
++ * This function shows the driver Debug Level.
++ */
++static ssize_t dbg_level_show(struct device_driver *drv, char *buf)
++{
++	return sprintf(buf, "0x%0x\n", g_dbg_lvl);
++}
++
++/**
++ * This function stores the driver Debug Level.
++ */
++static ssize_t dbg_level_store(struct device_driver *drv, const char *buf,
++			       size_t count)
++{
++	g_dbg_lvl = simple_strtoul(buf, NULL, 16);
++	return count;
++}
++
++static DRIVER_ATTR(debuglevel, S_IRUGO | S_IWUSR, dbg_level_show,
++		   dbg_level_store);
++
++/**
++ * This function is called during module intialization
++ * to pass module parameters to the DWC_OTG CORE.
++ */
++static int set_parameters(dwc_otg_core_if_t * core_if)
++{
++	int retval = 0;
++	int i;
++
++	if (dwc_otg_module_params.otg_cap != -1) {
++		retval +=
++		    dwc_otg_set_param_otg_cap(core_if,
++					      dwc_otg_module_params.otg_cap);
++	}
++	if (dwc_otg_module_params.dma_enable != -1) {
++		retval +=
++		    dwc_otg_set_param_dma_enable(core_if,
++						 dwc_otg_module_params.
++						 dma_enable);
++	}
++	if (dwc_otg_module_params.dma_desc_enable != -1) {
++		retval +=
++		    dwc_otg_set_param_dma_desc_enable(core_if,
++						      dwc_otg_module_params.
++						      dma_desc_enable);
++	}
++	if (dwc_otg_module_params.opt != -1) {
++		retval +=
++		    dwc_otg_set_param_opt(core_if, dwc_otg_module_params.opt);
++	}
++	if (dwc_otg_module_params.dma_burst_size != -1) {
++		retval +=
++		    dwc_otg_set_param_dma_burst_size(core_if,
++						     dwc_otg_module_params.
++						     dma_burst_size);
++	}
++	if (dwc_otg_module_params.host_support_fs_ls_low_power != -1) {
++		retval +=
++		    dwc_otg_set_param_host_support_fs_ls_low_power(core_if,
++								   dwc_otg_module_params.
++								   host_support_fs_ls_low_power);
++	}
++	if (dwc_otg_module_params.enable_dynamic_fifo != -1) {
++		retval +=
++		    dwc_otg_set_param_enable_dynamic_fifo(core_if,
++							  dwc_otg_module_params.
++							  enable_dynamic_fifo);
++	}
++	if (dwc_otg_module_params.data_fifo_size != -1) {
++		retval +=
++		    dwc_otg_set_param_data_fifo_size(core_if,
++						     dwc_otg_module_params.
++						     data_fifo_size);
++	}
++	if (dwc_otg_module_params.dev_rx_fifo_size != -1) {
++		retval +=
++		    dwc_otg_set_param_dev_rx_fifo_size(core_if,
++						       dwc_otg_module_params.
++						       dev_rx_fifo_size);
++	}
++	if (dwc_otg_module_params.dev_nperio_tx_fifo_size != -1) {
++		retval +=
++		    dwc_otg_set_param_dev_nperio_tx_fifo_size(core_if,
++							      dwc_otg_module_params.
++							      dev_nperio_tx_fifo_size);
++	}
++	if (dwc_otg_module_params.host_rx_fifo_size != -1) {
++		retval +=
++		    dwc_otg_set_param_host_rx_fifo_size(core_if,
++							dwc_otg_module_params.host_rx_fifo_size);
++	}
++	if (dwc_otg_module_params.host_nperio_tx_fifo_size != -1) {
++		retval +=
++		    dwc_otg_set_param_host_nperio_tx_fifo_size(core_if,
++							       dwc_otg_module_params.
++							       host_nperio_tx_fifo_size);
++	}
++	if (dwc_otg_module_params.host_perio_tx_fifo_size != -1) {
++		retval +=
++		    dwc_otg_set_param_host_perio_tx_fifo_size(core_if,
++							      dwc_otg_module_params.
++							      host_perio_tx_fifo_size);
++	}
++	if (dwc_otg_module_params.max_transfer_size != -1) {
++		retval +=
++		    dwc_otg_set_param_max_transfer_size(core_if,
++							dwc_otg_module_params.
++							max_transfer_size);
++	}
++	if (dwc_otg_module_params.max_packet_count != -1) {
++		retval +=
++		    dwc_otg_set_param_max_packet_count(core_if,
++						       dwc_otg_module_params.
++						       max_packet_count);
++	}
++	if (dwc_otg_module_params.host_channels != -1) {
++		retval +=
++		    dwc_otg_set_param_host_channels(core_if,
++						    dwc_otg_module_params.
++						    host_channels);
++	}
++	if (dwc_otg_module_params.dev_endpoints != -1) {
++		retval +=
++		    dwc_otg_set_param_dev_endpoints(core_if,
++						    dwc_otg_module_params.
++						    dev_endpoints);
++	}
++	if (dwc_otg_module_params.phy_type != -1) {
++		retval +=
++		    dwc_otg_set_param_phy_type(core_if,
++					       dwc_otg_module_params.phy_type);
++	}
++	if (dwc_otg_module_params.speed != -1) {
++		retval +=
++		    dwc_otg_set_param_speed(core_if,
++					    dwc_otg_module_params.speed);
++	}
++	if (dwc_otg_module_params.host_ls_low_power_phy_clk != -1) {
++		retval +=
++		    dwc_otg_set_param_host_ls_low_power_phy_clk(core_if,
++								dwc_otg_module_params.
++								host_ls_low_power_phy_clk);
++	}
++	if (dwc_otg_module_params.phy_ulpi_ddr != -1) {
++		retval +=
++		    dwc_otg_set_param_phy_ulpi_ddr(core_if,
++						   dwc_otg_module_params.
++						   phy_ulpi_ddr);
++	}
++	if (dwc_otg_module_params.phy_ulpi_ext_vbus != -1) {
++		retval +=
++		    dwc_otg_set_param_phy_ulpi_ext_vbus(core_if,
++							dwc_otg_module_params.
++							phy_ulpi_ext_vbus);
++	}
++	if (dwc_otg_module_params.phy_utmi_width != -1) {
++		retval +=
++		    dwc_otg_set_param_phy_utmi_width(core_if,
++						     dwc_otg_module_params.
++						     phy_utmi_width);
++	}
++	if (dwc_otg_module_params.ulpi_fs_ls != -1) {
++		retval +=
++		    dwc_otg_set_param_ulpi_fs_ls(core_if,
++						 dwc_otg_module_params.ulpi_fs_ls);
++	}
++	if (dwc_otg_module_params.ts_dline != -1) {
++		retval +=
++		    dwc_otg_set_param_ts_dline(core_if,
++					       dwc_otg_module_params.ts_dline);
++	}
++	if (dwc_otg_module_params.i2c_enable != -1) {
++		retval +=
++		    dwc_otg_set_param_i2c_enable(core_if,
++						 dwc_otg_module_params.
++						 i2c_enable);
++	}
++	if (dwc_otg_module_params.en_multiple_tx_fifo != -1) {
++		retval +=
++		    dwc_otg_set_param_en_multiple_tx_fifo(core_if,
++							  dwc_otg_module_params.
++							  en_multiple_tx_fifo);
++	}
++	for (i = 0; i < 15; i++) {
++		if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] != -1) {
++			retval +=
++			    dwc_otg_set_param_dev_perio_tx_fifo_size(core_if,
++								     dwc_otg_module_params.
++								     dev_perio_tx_fifo_size
++								     [i], i);
++		}
++	}
++
++	for (i = 0; i < 15; i++) {
++		if (dwc_otg_module_params.dev_tx_fifo_size[i] != -1) {
++			retval += dwc_otg_set_param_dev_tx_fifo_size(core_if,
++								     dwc_otg_module_params.
++								     dev_tx_fifo_size
++								     [i], i);
++		}
++	}
++	if (dwc_otg_module_params.thr_ctl != -1) {
++		retval +=
++		    dwc_otg_set_param_thr_ctl(core_if,
++					      dwc_otg_module_params.thr_ctl);
++	}
++	if (dwc_otg_module_params.mpi_enable != -1) {
++		retval +=
++		    dwc_otg_set_param_mpi_enable(core_if,
++						 dwc_otg_module_params.
++						 mpi_enable);
++	}
++	if (dwc_otg_module_params.pti_enable != -1) {
++		retval +=
++		    dwc_otg_set_param_pti_enable(core_if,
++						 dwc_otg_module_params.
++						 pti_enable);
++	}
++	if (dwc_otg_module_params.lpm_enable != -1) {
++		retval +=
++		    dwc_otg_set_param_lpm_enable(core_if,
++						 dwc_otg_module_params.
++						 lpm_enable);
++	}
++	if (dwc_otg_module_params.ic_usb_cap != -1) {
++		retval +=
++		    dwc_otg_set_param_ic_usb_cap(core_if,
++						 dwc_otg_module_params.
++						 ic_usb_cap);
++	}
++	if (dwc_otg_module_params.tx_thr_length != -1) {
++		retval +=
++		    dwc_otg_set_param_tx_thr_length(core_if,
++						    dwc_otg_module_params.tx_thr_length);
++	}
++	if (dwc_otg_module_params.rx_thr_length != -1) {
++		retval +=
++		    dwc_otg_set_param_rx_thr_length(core_if,
++						    dwc_otg_module_params.
++						    rx_thr_length);
++	}
++	if (dwc_otg_module_params.ahb_thr_ratio != -1) {
++		retval +=
++		    dwc_otg_set_param_ahb_thr_ratio(core_if,
++						    dwc_otg_module_params.ahb_thr_ratio);
++	}
++	if (dwc_otg_module_params.power_down != -1) {
++		retval +=
++		    dwc_otg_set_param_power_down(core_if,
++						 dwc_otg_module_params.power_down);
++	}
++	if (dwc_otg_module_params.reload_ctl != -1) {
++		retval +=
++		    dwc_otg_set_param_reload_ctl(core_if,
++						 dwc_otg_module_params.reload_ctl);
++	}
++
++	if (dwc_otg_module_params.dev_out_nak != -1) {
++		retval +=
++			dwc_otg_set_param_dev_out_nak(core_if,
++			dwc_otg_module_params.dev_out_nak);
++	}
++
++	if (dwc_otg_module_params.cont_on_bna != -1) {
++		retval +=
++			dwc_otg_set_param_cont_on_bna(core_if,
++			dwc_otg_module_params.cont_on_bna);
++	}
++
++	if (dwc_otg_module_params.ahb_single != -1) {
++		retval +=
++			dwc_otg_set_param_ahb_single(core_if,
++			dwc_otg_module_params.ahb_single);
++	}
++
++	if (dwc_otg_module_params.otg_ver != -1) {
++		retval +=
++		    dwc_otg_set_param_otg_ver(core_if,
++					      dwc_otg_module_params.otg_ver);
++	}
++	if (dwc_otg_module_params.adp_enable != -1) {
++		retval +=
++		    dwc_otg_set_param_adp_enable(core_if,
++						 dwc_otg_module_params.
++						 adp_enable);
++	}
++	return retval;
++}
++
++/**
++ * This function is the top level interrupt handler for the Common
++ * (Device and host modes) interrupts.
++ */
++static irqreturn_t dwc_otg_common_irq(int irq, void *dev)
++{
++	int32_t retval = IRQ_NONE;
++
++	retval = dwc_otg_handle_common_intr(dev);
++	if (retval != 0) {
++		S3C2410X_CLEAR_EINTPEND();
++	}
++	return IRQ_RETVAL(retval);
++}
++
++/**
++ * This function is called when a lm_device is unregistered with the
++ * dwc_otg_driver. This happens, for example, when the rmmod command is
++ * executed. The device may or may not be electrically present. If it is
++ * present, the driver stops device processing. Any resources used on behalf
++ * of this device are freed.
++ *
++ * @param _dev
++ */
++#ifdef LM_INTERFACE
++#define REM_RETVAL(n)
++static void dwc_otg_driver_remove(	 struct lm_device *_dev )
++{       dwc_otg_device_t *otg_dev = lm_get_drvdata(_dev);
++#elif  defined(PCI_INTERFACE)
++#define REM_RETVAL(n)
++static void dwc_otg_driver_remove(	 struct pci_dev *_dev )
++{	dwc_otg_device_t *otg_dev = pci_get_drvdata(_dev);
++#elif  defined(PLATFORM_INTERFACE)
++#define REM_RETVAL(n) n
++static int dwc_otg_driver_remove(        struct platform_device *_dev )
++{       dwc_otg_device_t *otg_dev = platform_get_drvdata(_dev);
++#endif
++
++	DWC_DEBUGPL(DBG_ANY, "%s(%p) otg_dev %p\n", __func__, _dev, otg_dev);
++
++	if (!otg_dev) {
++		/* Memory allocation for the dwc_otg_device failed. */
++		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__);
++                return REM_RETVAL(-ENOMEM);
++	}
++#ifndef DWC_DEVICE_ONLY
++	if (otg_dev->hcd) {
++		hcd_remove(_dev);
++	} else {
++		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__);
++                return REM_RETVAL(-EINVAL);
++	}
++#endif
++
++#ifndef DWC_HOST_ONLY
++	if (otg_dev->pcd) {
++		pcd_remove(_dev);
++	} else {
++		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->pcd NULL!\n", __func__);
++                return REM_RETVAL(-EINVAL);
++	}
++#endif
++	/*
++	 * Free the IRQ
++	 */
++	if (otg_dev->common_irq_installed) {
++#ifdef PLATFORM_INTERFACE
++		free_irq(platform_get_irq(_dev, 0), otg_dev);
++#else
++		free_irq(_dev->irq, otg_dev);
++#endif
++        } else {
++		DWC_DEBUGPL(DBG_ANY, "%s: There is no installed irq!\n", __func__);
++		return REM_RETVAL(-ENXIO);
++	}
++
++	if (otg_dev->core_if) {
++		dwc_otg_cil_remove(otg_dev->core_if);
++	} else {
++		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->core_if NULL!\n", __func__);
++		return REM_RETVAL(-ENXIO);
++	}
++
++	/*
++	 * Remove the device attributes
++	 */
++	dwc_otg_attr_remove(_dev);
++
++	/*
++	 * Return the memory.
++	 */
++	if (otg_dev->os_dep.base) {
++		iounmap(otg_dev->os_dep.base);
++	}
++	DWC_FREE(otg_dev);
++
++	/*
++	 * Clear the drvdata pointer.
++	 */
++#ifdef LM_INTERFACE
++	lm_set_drvdata(_dev, 0);
++#elif defined(PCI_INTERFACE)
++        release_mem_region(otg_dev->os_dep.rsrc_start,
++                           otg_dev->os_dep.rsrc_len);
++	pci_set_drvdata(_dev, 0);
++#elif  defined(PLATFORM_INTERFACE)
++        platform_set_drvdata(_dev, 0);
++#endif
++        return REM_RETVAL(0);
++}
++
++/**
++ * This function is called when an lm_device is bound to a
++ * dwc_otg_driver. It creates the driver components required to
++ * control the device (CIL, HCD, and PCD) and it initializes the
++ * device. The driver components are stored in a dwc_otg_device
++ * structure. A reference to the dwc_otg_device is saved in the
++ * lm_device. This allows the driver to access the dwc_otg_device
++ * structure on subsequent calls to driver methods for this device.
++ *
++ * @param _dev Bus device
++ */
++static int dwc_otg_driver_probe(
++#ifdef LM_INTERFACE
++				       struct lm_device *_dev
++#elif defined(PCI_INTERFACE)
++				       struct pci_dev *_dev,
++				       const struct pci_device_id *id
++#elif  defined(PLATFORM_INTERFACE)
++                                       struct platform_device *_dev
++#endif
++    )
++{
++	int retval = 0;
++	dwc_otg_device_t *dwc_otg_device;
++        int devirq;
++
++	dev_dbg(&_dev->dev, "dwc_otg_driver_probe(%p)\n", _dev);
++#ifdef LM_INTERFACE
++	dev_dbg(&_dev->dev, "start=0x%08x\n", (unsigned)_dev->resource.start);
++#elif defined(PCI_INTERFACE)
++	if (!id) {
++		DWC_ERROR("Invalid pci_device_id %p", id);
++		return -EINVAL;
++	}
++
++	if (!_dev || (pci_enable_device(_dev) < 0)) {
++		DWC_ERROR("Invalid pci_device %p", _dev);
++		return -ENODEV;
++	}
++	dev_dbg(&_dev->dev, "start=0x%08x\n", (unsigned)pci_resource_start(_dev,0));
++	/* other stuff needed as well? */
++
++#elif  defined(PLATFORM_INTERFACE)
++	dev_dbg(&_dev->dev, "start=0x%08x (len 0x%x)\n",
++                (unsigned)_dev->resource->start,
++                (unsigned)(_dev->resource->end - _dev->resource->start));
++#endif
++
++	dwc_otg_device = DWC_ALLOC(sizeof(dwc_otg_device_t));
++
++	if (!dwc_otg_device) {
++		dev_err(&_dev->dev, "kmalloc of dwc_otg_device failed\n");
++		return -ENOMEM;
++	}
++
++	memset(dwc_otg_device, 0, sizeof(*dwc_otg_device));
++	dwc_otg_device->os_dep.reg_offset = 0xFFFFFFFF;
++
++	/*
++	 * Map the DWC_otg Core memory into virtual address space.
++	 */
++#ifdef LM_INTERFACE
++	dwc_otg_device->os_dep.base = ioremap(_dev->resource.start, SZ_256K);
++
++	if (!dwc_otg_device->os_dep.base) {
++		dev_err(&_dev->dev, "ioremap() failed\n");
++		DWC_FREE(dwc_otg_device);
++		return -ENOMEM;
++	}
++	dev_dbg(&_dev->dev, "base=0x%08x\n",
++		(unsigned)dwc_otg_device->os_dep.base);
++#elif defined(PCI_INTERFACE)
++	_dev->current_state = PCI_D0;
++	_dev->dev.power.power_state = PMSG_ON;
++
++	if (!_dev->irq) {
++		DWC_ERROR("Found HC with no IRQ. Check BIOS/PCI %s setup!",
++			  pci_name(_dev));
++		iounmap(dwc_otg_device->os_dep.base);
++		DWC_FREE(dwc_otg_device);
++		return -ENODEV;
++	}
++
++	dwc_otg_device->os_dep.rsrc_start = pci_resource_start(_dev, 0);
++	dwc_otg_device->os_dep.rsrc_len = pci_resource_len(_dev, 0);
++	DWC_DEBUGPL(DBG_ANY, "PCI resource: start=%08x, len=%08x\n",
++		    (unsigned)dwc_otg_device->os_dep.rsrc_start,
++		    (unsigned)dwc_otg_device->os_dep.rsrc_len);
++	if (!request_mem_region
++	    (dwc_otg_device->os_dep.rsrc_start, dwc_otg_device->os_dep.rsrc_len,
++	     "dwc_otg")) {
++		dev_dbg(&_dev->dev, "error requesting memory\n");
++		iounmap(dwc_otg_device->os_dep.base);
++		DWC_FREE(dwc_otg_device);
++		return -EFAULT;
++	}
++
++	dwc_otg_device->os_dep.base =
++	    ioremap_nocache(dwc_otg_device->os_dep.rsrc_start,
++			    dwc_otg_device->os_dep.rsrc_len);
++	if (dwc_otg_device->os_dep.base == NULL) {
++		dev_dbg(&_dev->dev, "error mapping memory\n");
++		release_mem_region(dwc_otg_device->os_dep.rsrc_start,
++				   dwc_otg_device->os_dep.rsrc_len);
++		iounmap(dwc_otg_device->os_dep.base);
++		DWC_FREE(dwc_otg_device);
++		return -EFAULT;
++	}
++	dev_dbg(&_dev->dev, "base=0x%p (before adjust) \n",
++		dwc_otg_device->os_dep.base);
++	dwc_otg_device->os_dep.base = (char *)dwc_otg_device->os_dep.base;
++	dev_dbg(&_dev->dev, "base=0x%p (after adjust) \n",
++		dwc_otg_device->os_dep.base);
++	dev_dbg(&_dev->dev, "%s: mapped PA 0x%x to VA 0x%p\n", __func__,
++		(unsigned)dwc_otg_device->os_dep.rsrc_start,
++		dwc_otg_device->os_dep.base);
++
++	pci_set_master(_dev);
++	pci_set_drvdata(_dev, dwc_otg_device);
++#elif defined(PLATFORM_INTERFACE)
++        DWC_DEBUGPL(DBG_ANY,"Platform resource: start=%08x, len=%08x\n",
++                    _dev->resource->start,
++                    _dev->resource->end - _dev->resource->start + 1);
++#if 1
++        if (!request_mem_region(_dev->resource[0].start,
++                                _dev->resource[0].end - _dev->resource[0].start + 1,
++                                "dwc_otg")) {
++          dev_dbg(&_dev->dev, "error reserving mapped memory\n");
++          retval = -EFAULT;
++          goto fail;
++        }
++
++	dwc_otg_device->os_dep.base = ioremap_nocache(_dev->resource[0].start,
++                                                      _dev->resource[0].end -
++                                                      _dev->resource[0].start+1);
++	if (fiq_fix_enable)
++	{
++		if (!request_mem_region(_dev->resource[1].start,
++	                                _dev->resource[1].end - _dev->resource[1].start + 1,
++	                                "dwc_otg")) {
++	          dev_dbg(&_dev->dev, "error reserving mapped memory\n");
++	          retval = -EFAULT;
++	          goto fail;
++	}
++
++		dwc_otg_device->os_dep.mphi_base = ioremap_nocache(_dev->resource[1].start,
++							    _dev->resource[1].end -
++							    _dev->resource[1].start + 1);
++		dummy_send = (void *) kmalloc(16, GFP_ATOMIC);
++	}
++
++#else
++        {
++                struct map_desc desc = {
++                    .virtual = IO_ADDRESS((unsigned)_dev->resource->start),
++                    .pfn     = __phys_to_pfn((unsigned)_dev->resource->start),
++                    .length  = SZ_128K,
++                    .type    = MT_DEVICE
++                };
++                iotable_init(&desc, 1);
++                dwc_otg_device->os_dep.base = (void *)desc.virtual;
++        }
++#endif
++	if (!dwc_otg_device->os_dep.base) {
++		dev_err(&_dev->dev, "ioremap() failed\n");
++		retval = -ENOMEM;
++		goto fail;
++	}
++	dev_dbg(&_dev->dev, "base=0x%08x\n",
++                (unsigned)dwc_otg_device->os_dep.base);
++#endif
++
++	/*
++	 * Initialize driver data to point to the global DWC_otg
++	 * Device structure.
++	 */
++#ifdef LM_INTERFACE
++	lm_set_drvdata(_dev, dwc_otg_device);
++#elif defined(PLATFORM_INTERFACE)
++	platform_set_drvdata(_dev, dwc_otg_device);
++#endif
++	dev_dbg(&_dev->dev, "dwc_otg_device=0x%p\n", dwc_otg_device);
++
++	dwc_otg_device->core_if = dwc_otg_cil_init(dwc_otg_device->os_dep.base);
++        DWC_DEBUGPL(DBG_HCDV, "probe of device %p given core_if %p\n",
++                    dwc_otg_device, dwc_otg_device->core_if);//GRAYG
++
++	if (!dwc_otg_device->core_if) {
++		dev_err(&_dev->dev, "CIL initialization failed!\n");
++		retval = -ENOMEM;
++		goto fail;
++	}
++
++	dev_dbg(&_dev->dev, "Calling get_gsnpsid\n");
++	/*
++	 * Attempt to ensure this device is really a DWC_otg Controller.
++	 * Read and verify the SNPSID register contents. The value should be
++	 * 0x45F42XXX or 0x45F42XXX, which corresponds to either "OT2" or "OTG3",
++	 * as in "OTG version 2.XX" or "OTG version 3.XX".
++	 */
++
++	if (((dwc_otg_get_gsnpsid(dwc_otg_device->core_if) & 0xFFFFF000) !=	0x4F542000) &&
++		((dwc_otg_get_gsnpsid(dwc_otg_device->core_if) & 0xFFFFF000) != 0x4F543000)) {
++		dev_err(&_dev->dev, "Bad value for SNPSID: 0x%08x\n",
++			dwc_otg_get_gsnpsid(dwc_otg_device->core_if));
++		retval = -EINVAL;
++		goto fail;
++	}
++
++	/*
++	 * Validate parameter values.
++	 */
++	dev_dbg(&_dev->dev, "Calling set_parameters\n");
++	if (set_parameters(dwc_otg_device->core_if)) {
++		retval = -EINVAL;
++		goto fail;
++	}
++
++	/*
++	 * Create Device Attributes in sysfs
++	 */
++	dev_dbg(&_dev->dev, "Calling attr_create\n");
++	dwc_otg_attr_create(_dev);
++
++	/*
++	 * Disable the global interrupt until all the interrupt
++	 * handlers are installed.
++	 */
++	dev_dbg(&_dev->dev, "Calling disable_global_interrupts\n");
++	dwc_otg_disable_global_interrupts(dwc_otg_device->core_if);
++
++	/*
++	 * Install the interrupt handler for the common interrupts before
++	 * enabling common interrupts in core_init below.
++	 */
++
++#if defined(PLATFORM_INTERFACE)
++        devirq = platform_get_irq(_dev, 0);
++#else
++        devirq = _dev->irq;
++#endif
++	DWC_DEBUGPL(DBG_CIL, "registering (common) handler for irq%d\n",
++		    devirq);
++	dev_dbg(&_dev->dev, "Calling request_irq(%d)\n", devirq);
++	retval = request_irq(devirq, dwc_otg_common_irq,
++                             IRQF_SHARED,
++                             "dwc_otg", dwc_otg_device);
++	if (retval) {
++		DWC_ERROR("request of irq%d failed\n", devirq);
++		retval = -EBUSY;
++		goto fail;
++	} else {
++		dwc_otg_device->common_irq_installed = 1;
++	}
++
++#ifndef IRQF_TRIGGER_LOW
++#if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE)
++	dev_dbg(&_dev->dev, "Calling set_irq_type\n");
++	set_irq_type(devirq,
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30))
++                     IRQT_LOW
++#else
++                     IRQ_TYPE_LEVEL_LOW
++#endif
++                    );
++#endif
++#endif /*IRQF_TRIGGER_LOW*/
++
++	/*
++	 * Initialize the DWC_otg core.
++	 */
++	dev_dbg(&_dev->dev, "Calling dwc_otg_core_init\n");
++	dwc_otg_core_init(dwc_otg_device->core_if);
++
++#ifndef DWC_HOST_ONLY
++	/*
++	 * Initialize the PCD
++	 */
++	dev_dbg(&_dev->dev, "Calling pcd_init\n");
++	retval = pcd_init(_dev);
++	if (retval != 0) {
++		DWC_ERROR("pcd_init failed\n");
++		dwc_otg_device->pcd = NULL;
++		goto fail;
++	}
++#endif
++#ifndef DWC_DEVICE_ONLY
++	/*
++	 * Initialize the HCD
++	 */
++	dev_dbg(&_dev->dev, "Calling hcd_init\n");
++	retval = hcd_init(_dev);
++	if (retval != 0) {
++		DWC_ERROR("hcd_init failed\n");
++		dwc_otg_device->hcd = NULL;
++		goto fail;
++	}
++#endif
++        /* Recover from drvdata having been overwritten by hcd_init() */
++#ifdef LM_INTERFACE
++	lm_set_drvdata(_dev, dwc_otg_device);
++#elif defined(PLATFORM_INTERFACE)
++	platform_set_drvdata(_dev, dwc_otg_device);
++#elif defined(PCI_INTERFACE)
++	pci_set_drvdata(_dev, dwc_otg_device);
++	dwc_otg_device->os_dep.pcidev = _dev;
++#endif
++
++	/*
++	 * Enable the global interrupt after all the interrupt
++	 * handlers are installed if there is no ADP support else
++	 * perform initial actions required for Internal ADP logic.
++	 */
++	if (!dwc_otg_get_param_adp_enable(dwc_otg_device->core_if)) {
++	        dev_dbg(&_dev->dev, "Calling enable_global_interrupts\n");
++		dwc_otg_enable_global_interrupts(dwc_otg_device->core_if);
++	        dev_dbg(&_dev->dev, "Done\n");
++	} else
++		dwc_otg_adp_start(dwc_otg_device->core_if,
++							dwc_otg_is_host_mode(dwc_otg_device->core_if));
++
++	return 0;
++
++fail:
++	dwc_otg_driver_remove(_dev);
++	return retval;
++}
++
++/**
++ * This structure defines the methods to be called by a bus driver
++ * during the lifecycle of a device on that bus. Both drivers and
++ * devices are registered with a bus driver. The bus driver matches
++ * devices to drivers based on information in the device and driver
++ * structures.
++ *
++ * The probe function is called when the bus driver matches a device
++ * to this driver. The remove function is called when a device is
++ * unregistered with the bus driver.
++ */
++#ifdef LM_INTERFACE
++static struct lm_driver dwc_otg_driver = {
++	.drv = {.name = (char *)dwc_driver_name,},
++	.probe = dwc_otg_driver_probe,
++	.remove = dwc_otg_driver_remove,
++        // 'suspend' and 'resume' absent
++};
++#elif defined(PCI_INTERFACE)
++static const struct pci_device_id pci_ids[] = { {
++						 PCI_DEVICE(0x16c3, 0xabcd),
++						 .driver_data =
++						 (unsigned long)0xdeadbeef,
++						 }, { /* end: all zeroes */ }
++};
++
++MODULE_DEVICE_TABLE(pci, pci_ids);
++
++/* pci driver glue; this is a "new style" PCI driver module */
++static struct pci_driver dwc_otg_driver = {
++	.name = "dwc_otg",
++	.id_table = pci_ids,
++
++	.probe = dwc_otg_driver_probe,
++	.remove = dwc_otg_driver_remove,
++
++	.driver = {
++		   .name = (char *)dwc_driver_name,
++		   },
++};
++#elif defined(PLATFORM_INTERFACE)
++static struct platform_device_id platform_ids[] = {
++        {
++              .name = "bcm2708_usb",
++              .driver_data = (kernel_ulong_t) 0xdeadbeef,
++        },
++        { /* end: all zeroes */ }
++};
++MODULE_DEVICE_TABLE(platform, platform_ids);
++
++static struct platform_driver dwc_otg_driver = {
++	.driver = {
++		.name = (char *)dwc_driver_name,
++		},
++        .id_table = platform_ids,
++
++	.probe = dwc_otg_driver_probe,
++	.remove = dwc_otg_driver_remove,
++        // no 'shutdown', 'suspend', 'resume', 'suspend_late' or 'resume_early'
++};
++#endif
++
++/**
++ * This function is called when the dwc_otg_driver is installed with the
++ * insmod command. It registers the dwc_otg_driver structure with the
++ * appropriate bus driver. This will cause the dwc_otg_driver_probe function
++ * to be called. In addition, the bus driver will automatically expose
++ * attributes defined for the device and driver in the special sysfs file
++ * system.
++ *
++ * @return
++ */
++static int __init dwc_otg_driver_init(void)
++{
++	int retval = 0;
++	int error;
++        struct device_driver *drv;
++
++	if(fiq_split_enable && !fiq_fix_enable) {
++		printk(KERN_WARNING "dwc_otg: fiq_split_enable was set without fiq_fix_enable! Correcting.\n");
++		fiq_fix_enable = 1;
++	}
++
++	printk(KERN_INFO "%s: version %s (%s bus)\n", dwc_driver_name,
++	       DWC_DRIVER_VERSION,
++#ifdef LM_INTERFACE
++               "logicmodule");
++	retval = lm_driver_register(&dwc_otg_driver);
++        drv = &dwc_otg_driver.drv;
++#elif defined(PCI_INTERFACE)
++               "pci");
++	retval = pci_register_driver(&dwc_otg_driver);
++        drv = &dwc_otg_driver.driver;
++#elif defined(PLATFORM_INTERFACE)
++               "platform");
++	retval = platform_driver_register(&dwc_otg_driver);
++        drv = &dwc_otg_driver.driver;
++#endif
++	if (retval < 0) {
++		printk(KERN_ERR "%s retval=%d\n", __func__, retval);
++		return retval;
++	}
++	printk(KERN_DEBUG "dwc_otg: FIQ %s\n", fiq_fix_enable ? "enabled":"disabled");
++	printk(KERN_DEBUG "dwc_otg: NAK holdoff %s\n", nak_holdoff_enable ? "enabled":"disabled");
++	printk(KERN_DEBUG "dwc_otg: FIQ split fix %s\n", fiq_split_enable ? "enabled":"disabled");
++
++	error = driver_create_file(drv, &driver_attr_version);
++#ifdef DEBUG
++	error = driver_create_file(drv, &driver_attr_debuglevel);
++#endif
++	return retval;
++}
++
++module_init(dwc_otg_driver_init);
++
++/**
++ * This function is called when the driver is removed from the kernel
++ * with the rmmod command. The driver unregisters itself with its bus
++ * driver.
++ *
++ */
++static void __exit dwc_otg_driver_cleanup(void)
++{
++	printk(KERN_DEBUG "dwc_otg_driver_cleanup()\n");
++
++#ifdef LM_INTERFACE
++	driver_remove_file(&dwc_otg_driver.drv, &driver_attr_debuglevel);
++	driver_remove_file(&dwc_otg_driver.drv, &driver_attr_version);
++	lm_driver_unregister(&dwc_otg_driver);
++#elif defined(PCI_INTERFACE)
++	driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel);
++	driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version);
++	pci_unregister_driver(&dwc_otg_driver);
++#elif defined(PLATFORM_INTERFACE)
++	driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel);
++	driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version);
++	platform_driver_unregister(&dwc_otg_driver);
++#endif
++
++	printk(KERN_INFO "%s module removed\n", dwc_driver_name);
++}
++
++module_exit(dwc_otg_driver_cleanup);
++
++MODULE_DESCRIPTION(DWC_DRIVER_DESC);
++MODULE_AUTHOR("Synopsys Inc.");
++MODULE_LICENSE("GPL");
++
++module_param_named(otg_cap, dwc_otg_module_params.otg_cap, int, 0444);
++MODULE_PARM_DESC(otg_cap, "OTG Capabilities 0=HNP&SRP 1=SRP Only 2=None");
++module_param_named(opt, dwc_otg_module_params.opt, int, 0444);
++MODULE_PARM_DESC(opt, "OPT Mode");
++module_param_named(dma_enable, dwc_otg_module_params.dma_enable, int, 0444);
++MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled");
++
++module_param_named(dma_desc_enable, dwc_otg_module_params.dma_desc_enable, int,
++		   0444);
++MODULE_PARM_DESC(dma_desc_enable,
++		 "DMA Desc Mode 0=Address DMA 1=DMA Descriptor enabled");
++
++module_param_named(dma_burst_size, dwc_otg_module_params.dma_burst_size, int,
++		   0444);
++MODULE_PARM_DESC(dma_burst_size,
++		 "DMA Burst Size 1, 4, 8, 16, 32, 64, 128, 256");
++module_param_named(speed, dwc_otg_module_params.speed, int, 0444);
++MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed");
++module_param_named(host_support_fs_ls_low_power,
++		   dwc_otg_module_params.host_support_fs_ls_low_power, int,
++		   0444);
++MODULE_PARM_DESC(host_support_fs_ls_low_power,
++		 "Support Low Power w/FS or LS 0=Support 1=Don't Support");
++module_param_named(host_ls_low_power_phy_clk,
++		   dwc_otg_module_params.host_ls_low_power_phy_clk, int, 0444);
++MODULE_PARM_DESC(host_ls_low_power_phy_clk,
++		 "Low Speed Low Power Clock 0=48Mhz 1=6Mhz");
++module_param_named(enable_dynamic_fifo,
++		   dwc_otg_module_params.enable_dynamic_fifo, int, 0444);
++MODULE_PARM_DESC(enable_dynamic_fifo, "0=cC Setting 1=Allow Dynamic Sizing");
++module_param_named(data_fifo_size, dwc_otg_module_params.data_fifo_size, int,
++		   0444);
++MODULE_PARM_DESC(data_fifo_size,
++		 "Total number of words in the data FIFO memory 32-32768");
++module_param_named(dev_rx_fifo_size, dwc_otg_module_params.dev_rx_fifo_size,
++		   int, 0444);
++MODULE_PARM_DESC(dev_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
++module_param_named(dev_nperio_tx_fifo_size,
++		   dwc_otg_module_params.dev_nperio_tx_fifo_size, int, 0444);
++MODULE_PARM_DESC(dev_nperio_tx_fifo_size,
++		 "Number of words in the non-periodic Tx FIFO 16-32768");
++module_param_named(dev_perio_tx_fifo_size_1,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[0], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_1,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_2,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[1], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_2,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_3,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[2], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_3,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_4,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[3], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_4,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_5,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[4], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_5,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_6,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[5], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_6,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_7,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[6], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_7,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_8,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[7], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_8,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_9,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[8], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_9,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_10,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[9], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_10,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_11,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[10], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_11,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_12,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[11], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_12,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_13,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[12], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_13,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_14,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[13], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_14,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_15,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[14], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_15,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(host_rx_fifo_size, dwc_otg_module_params.host_rx_fifo_size,
++		   int, 0444);
++MODULE_PARM_DESC(host_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
++module_param_named(host_nperio_tx_fifo_size,
++		   dwc_otg_module_params.host_nperio_tx_fifo_size, int, 0444);
++MODULE_PARM_DESC(host_nperio_tx_fifo_size,
++		 "Number of words in the non-periodic Tx FIFO 16-32768");
++module_param_named(host_perio_tx_fifo_size,
++		   dwc_otg_module_params.host_perio_tx_fifo_size, int, 0444);
++MODULE_PARM_DESC(host_perio_tx_fifo_size,
++		 "Number of words in the host periodic Tx FIFO 16-32768");
++module_param_named(max_transfer_size, dwc_otg_module_params.max_transfer_size,
++		   int, 0444);
++/** @todo Set the max to 512K, modify checks */
++MODULE_PARM_DESC(max_transfer_size,
++		 "The maximum transfer size supported in bytes 2047-65535");
++module_param_named(max_packet_count, dwc_otg_module_params.max_packet_count,
++		   int, 0444);
++MODULE_PARM_DESC(max_packet_count,
++		 "The maximum number of packets in a transfer 15-511");
++module_param_named(host_channels, dwc_otg_module_params.host_channels, int,
++		   0444);
++MODULE_PARM_DESC(host_channels,
++		 "The number of host channel registers to use 1-16");
++module_param_named(dev_endpoints, dwc_otg_module_params.dev_endpoints, int,
++		   0444);
++MODULE_PARM_DESC(dev_endpoints,
++		 "The number of endpoints in addition to EP0 available for device mode 1-15");
++module_param_named(phy_type, dwc_otg_module_params.phy_type, int, 0444);
++MODULE_PARM_DESC(phy_type, "0=Reserved 1=UTMI+ 2=ULPI");
++module_param_named(phy_utmi_width, dwc_otg_module_params.phy_utmi_width, int,
++		   0444);
++MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits");
++module_param_named(phy_ulpi_ddr, dwc_otg_module_params.phy_ulpi_ddr, int, 0444);
++MODULE_PARM_DESC(phy_ulpi_ddr,
++		 "ULPI at double or single data rate 0=Single 1=Double");
++module_param_named(phy_ulpi_ext_vbus, dwc_otg_module_params.phy_ulpi_ext_vbus,
++		   int, 0444);
++MODULE_PARM_DESC(phy_ulpi_ext_vbus,
++		 "ULPI PHY using internal or external vbus 0=Internal");
++module_param_named(i2c_enable, dwc_otg_module_params.i2c_enable, int, 0444);
++MODULE_PARM_DESC(i2c_enable, "FS PHY Interface");
++module_param_named(ulpi_fs_ls, dwc_otg_module_params.ulpi_fs_ls, int, 0444);
++MODULE_PARM_DESC(ulpi_fs_ls, "ULPI PHY FS/LS mode only");
++module_param_named(ts_dline, dwc_otg_module_params.ts_dline, int, 0444);
++MODULE_PARM_DESC(ts_dline, "Term select Dline pulsing for all PHYs");
++module_param_named(debug, g_dbg_lvl, int, 0444);
++MODULE_PARM_DESC(debug, "");
++
++module_param_named(en_multiple_tx_fifo,
++		   dwc_otg_module_params.en_multiple_tx_fifo, int, 0444);
++MODULE_PARM_DESC(en_multiple_tx_fifo,
++		 "Dedicated Non Periodic Tx FIFOs 0=disabled 1=enabled");
++module_param_named(dev_tx_fifo_size_1,
++		   dwc_otg_module_params.dev_tx_fifo_size[0], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_1, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_2,
++		   dwc_otg_module_params.dev_tx_fifo_size[1], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_2, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_3,
++		   dwc_otg_module_params.dev_tx_fifo_size[2], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_3, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_4,
++		   dwc_otg_module_params.dev_tx_fifo_size[3], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_4, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_5,
++		   dwc_otg_module_params.dev_tx_fifo_size[4], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_5, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_6,
++		   dwc_otg_module_params.dev_tx_fifo_size[5], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_6, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_7,
++		   dwc_otg_module_params.dev_tx_fifo_size[6], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_7, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_8,
++		   dwc_otg_module_params.dev_tx_fifo_size[7], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_8, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_9,
++		   dwc_otg_module_params.dev_tx_fifo_size[8], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_9, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_10,
++		   dwc_otg_module_params.dev_tx_fifo_size[9], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_10, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_11,
++		   dwc_otg_module_params.dev_tx_fifo_size[10], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_11, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_12,
++		   dwc_otg_module_params.dev_tx_fifo_size[11], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_12, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_13,
++		   dwc_otg_module_params.dev_tx_fifo_size[12], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_13, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_14,
++		   dwc_otg_module_params.dev_tx_fifo_size[13], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_14, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_15,
++		   dwc_otg_module_params.dev_tx_fifo_size[14], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_15, "Number of words in the Tx FIFO 4-768");
++
++module_param_named(thr_ctl, dwc_otg_module_params.thr_ctl, int, 0444);
++MODULE_PARM_DESC(thr_ctl,
++		 "Thresholding enable flag bit 0 - non ISO Tx thr., 1 - ISO Tx thr., 2 - Rx thr.- bit 0=disabled 1=enabled");
++module_param_named(tx_thr_length, dwc_otg_module_params.tx_thr_length, int,
++		   0444);
++MODULE_PARM_DESC(tx_thr_length, "Tx Threshold length in 32 bit DWORDs");
++module_param_named(rx_thr_length, dwc_otg_module_params.rx_thr_length, int,
++		   0444);
++MODULE_PARM_DESC(rx_thr_length, "Rx Threshold length in 32 bit DWORDs");
++
++module_param_named(pti_enable, dwc_otg_module_params.pti_enable, int, 0444);
++module_param_named(mpi_enable, dwc_otg_module_params.mpi_enable, int, 0444);
++module_param_named(lpm_enable, dwc_otg_module_params.lpm_enable, int, 0444);
++MODULE_PARM_DESC(lpm_enable, "LPM Enable 0=LPM Disabled 1=LPM Enabled");
++module_param_named(ic_usb_cap, dwc_otg_module_params.ic_usb_cap, int, 0444);
++MODULE_PARM_DESC(ic_usb_cap,
++		 "IC_USB Capability 0=IC_USB Disabled 1=IC_USB Enabled");
++module_param_named(ahb_thr_ratio, dwc_otg_module_params.ahb_thr_ratio, int,
++		   0444);
++MODULE_PARM_DESC(ahb_thr_ratio, "AHB Threshold Ratio");
++module_param_named(power_down, dwc_otg_module_params.power_down, int, 0444);
++MODULE_PARM_DESC(power_down, "Power Down Mode");
++module_param_named(reload_ctl, dwc_otg_module_params.reload_ctl, int, 0444);
++MODULE_PARM_DESC(reload_ctl, "HFIR Reload Control");
++module_param_named(dev_out_nak, dwc_otg_module_params.dev_out_nak, int, 0444);
++MODULE_PARM_DESC(dev_out_nak, "Enable Device OUT NAK");
++module_param_named(cont_on_bna, dwc_otg_module_params.cont_on_bna, int, 0444);
++MODULE_PARM_DESC(cont_on_bna, "Enable Enable Continue on BNA");
++module_param_named(ahb_single, dwc_otg_module_params.ahb_single, int, 0444);
++MODULE_PARM_DESC(ahb_single, "Enable AHB Single Support");
++module_param_named(adp_enable, dwc_otg_module_params.adp_enable, int, 0444);
++MODULE_PARM_DESC(adp_enable, "ADP Enable 0=ADP Disabled 1=ADP Enabled");
++module_param_named(otg_ver, dwc_otg_module_params.otg_ver, int, 0444);
++MODULE_PARM_DESC(otg_ver, "OTG revision supported 0=OTG 1.3 1=OTG 2.0");
++module_param(microframe_schedule, bool, 0444);
++MODULE_PARM_DESC(microframe_schedule, "Enable the microframe scheduler");
++
++module_param(fiq_fix_enable, bool, 0444);
++MODULE_PARM_DESC(fiq_fix_enable, "Enable the fiq fix");
++module_param(nak_holdoff_enable, bool, 0444);
++MODULE_PARM_DESC(nak_holdoff_enable, "Enable the NAK holdoff");
++module_param(fiq_split_enable, bool, 0444);
++MODULE_PARM_DESC(fiq_split_enable, "Enable the FIQ fix on split transactions");
++
++/** @page "Module Parameters"
++ *
++ * The following parameters may be specified when starting the module.
++ * These parameters define how the DWC_otg controller should be
++ * configured. Parameter values are passed to the CIL initialization
++ * function dwc_otg_cil_init
++ *
++ * Example: <code>modprobe dwc_otg speed=1 otg_cap=1</code>
++ *
++
++ <table>
++ <tr><td>Parameter Name</td><td>Meaning</td></tr>
++
++ <tr>
++ <td>otg_cap</td>
++ <td>Specifies the OTG capabilities. The driver will automatically detect the
++ value for this parameter if none is specified.
++ - 0: HNP and SRP capable (default, if available)
++ - 1: SRP Only capable
++ - 2: No HNP/SRP capable
++ </td></tr>
++
++ <tr>
++ <td>dma_enable</td>
++ <td>Specifies whether to use slave or DMA mode for accessing the data FIFOs.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: Slave
++ - 1: DMA (default, if available)
++ </td></tr>
++
++ <tr>
++ <td>dma_burst_size</td>
++ <td>The DMA Burst size (applicable only for External DMA Mode).
++ - Values: 1, 4, 8 16, 32, 64, 128, 256 (default 32)
++ </td></tr>
++
++ <tr>
++ <td>speed</td>
++ <td>Specifies the maximum speed of operation in host and device mode. The
++ actual speed depends on the speed of the attached device and the value of
++ phy_type.
++ - 0: High Speed (default)
++ - 1: Full Speed
++ </td></tr>
++
++ <tr>
++ <td>host_support_fs_ls_low_power</td>
++ <td>Specifies whether low power mode is supported when attached to a Full
++ Speed or Low Speed device in host mode.
++ - 0: Don't support low power mode (default)
++ - 1: Support low power mode
++ </td></tr>
++
++ <tr>
++ <td>host_ls_low_power_phy_clk</td>
++ <td>Specifies the PHY clock rate in low power mode when connected to a Low
++ Speed device in host mode. This parameter is applicable only if
++ HOST_SUPPORT_FS_LS_LOW_POWER is enabled.
++ - 0: 48 MHz (default)
++ - 1: 6 MHz
++ </td></tr>
++
++ <tr>
++ <td>enable_dynamic_fifo</td>
++ <td> Specifies whether FIFOs may be resized by the driver software.
++ - 0: Use cC FIFO size parameters
++ - 1: Allow dynamic FIFO sizing (default)
++ </td></tr>
++
++ <tr>
++ <td>data_fifo_size</td>
++ <td>Total number of 4-byte words in the data FIFO memory. This memory
++ includes the Rx FIFO, non-periodic Tx FIFO, and periodic Tx FIFOs.
++ - Values: 32 to 32768 (default 8192)
++
++ Note: The total FIFO memory depth in the FPGA configuration is 8192.
++ </td></tr>
++
++ <tr>
++ <td>dev_rx_fifo_size</td>
++ <td>Number of 4-byte words in the Rx FIFO in device mode when dynamic
++ FIFO sizing is enabled.
++ - Values: 16 to 32768 (default 1064)
++ </td></tr>
++
++ <tr>
++ <td>dev_nperio_tx_fifo_size</td>
++ <td>Number of 4-byte words in the non-periodic Tx FIFO in device mode when
++ dynamic FIFO sizing is enabled.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++
++ <tr>
++ <td>dev_perio_tx_fifo_size_n (n = 1 to 15)</td>
++ <td>Number of 4-byte words in each of the periodic Tx FIFOs in device mode
++ when dynamic FIFO sizing is enabled.
++ - Values: 4 to 768 (default 256)
++ </td></tr>
++
++ <tr>
++ <td>host_rx_fifo_size</td>
++ <td>Number of 4-byte words in the Rx FIFO in host mode when dynamic FIFO
++ sizing is enabled.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++
++ <tr>
++ <td>host_nperio_tx_fifo_size</td>
++ <td>Number of 4-byte words in the non-periodic Tx FIFO in host mode when
++ dynamic FIFO sizing is enabled in the core.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++
++ <tr>
++ <td>host_perio_tx_fifo_size</td>
++ <td>Number of 4-byte words in the host periodic Tx FIFO when dynamic FIFO
++ sizing is enabled.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++
++ <tr>
++ <td>max_transfer_size</td>
++ <td>The maximum transfer size supported in bytes.
++ - Values: 2047 to 65,535 (default 65,535)
++ </td></tr>
++
++ <tr>
++ <td>max_packet_count</td>
++ <td>The maximum number of packets in a transfer.
++ - Values: 15 to 511 (default 511)
++ </td></tr>
++
++ <tr>
++ <td>host_channels</td>
++ <td>The number of host channel registers to use.
++ - Values: 1 to 16 (default 12)
++
++ Note: The FPGA configuration supports a maximum of 12 host channels.
++ </td></tr>
++
++ <tr>
++ <td>dev_endpoints</td>
++ <td>The number of endpoints in addition to EP0 available for device mode
++ operations.
++ - Values: 1 to 15 (default 6 IN and OUT)
++
++ Note: The FPGA configuration supports a maximum of 6 IN and OUT endpoints in
++ addition to EP0.
++ </td></tr>
++
++ <tr>
++ <td>phy_type</td>
++ <td>Specifies the type of PHY interface to use. By default, the driver will
++ automatically detect the phy_type.
++ - 0: Full Speed
++ - 1: UTMI+ (default, if available)
++ - 2: ULPI
++ </td></tr>
++
++ <tr>
++ <td>phy_utmi_width</td>
++ <td>Specifies the UTMI+ Data Width. This parameter is applicable for a
++ phy_type of UTMI+. Also, this parameter is applicable only if the
++ OTG_HSPHY_WIDTH cC parameter was set to "8 and 16 bits", meaning that the
++ core has been configured to work at either data path width.
++ - Values: 8 or 16 bits (default 16)
++ </td></tr>
++
++ <tr>
++ <td>phy_ulpi_ddr</td>
++ <td>Specifies whether the ULPI operates at double or single data rate. This
++ parameter is only applicable if phy_type is ULPI.
++ - 0: single data rate ULPI interface with 8 bit wide data bus (default)
++ - 1: double data rate ULPI interface with 4 bit wide data bus
++ </td></tr>
++
++ <tr>
++ <td>i2c_enable</td>
++ <td>Specifies whether to use the I2C interface for full speed PHY. This
++ parameter is only applicable if PHY_TYPE is FS.
++ - 0: Disabled (default)
++ - 1: Enabled
++ </td></tr>
++
++ <tr>
++ <td>ulpi_fs_ls</td>
++ <td>Specifies whether to use ULPI FS/LS mode only.
++ - 0: Disabled (default)
++ - 1: Enabled
++ </td></tr>
++
++ <tr>
++ <td>ts_dline</td>
++ <td>Specifies whether term select D-Line pulsing for all PHYs is enabled.
++ - 0: Disabled (default)
++ - 1: Enabled
++ </td></tr>
++
++ <tr>
++ <td>en_multiple_tx_fifo</td>
++ <td>Specifies whether dedicatedto tx fifos are enabled for non periodic IN EPs.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: Disabled
++ - 1: Enabled (default, if available)
++ </td></tr>
++
++ <tr>
++ <td>dev_tx_fifo_size_n (n = 1 to 15)</td>
++ <td>Number of 4-byte words in each of the Tx FIFOs in device mode
++ when dynamic FIFO sizing is enabled.
++ - Values: 4 to 768 (default 256)
++ </td></tr>
++
++ <tr>
++ <td>tx_thr_length</td>
++ <td>Transmit Threshold length in 32 bit double words
++ - Values: 8 to 128 (default 64)
++ </td></tr>
++
++ <tr>
++ <td>rx_thr_length</td>
++ <td>Receive Threshold length in 32 bit double words
++ - Values: 8 to 128 (default 64)
++ </td></tr>
++
++<tr>
++ <td>thr_ctl</td>
++ <td>Specifies whether to enable Thresholding for Device mode. Bits 0, 1, 2 of
++ this parmater specifies if thresholding is enabled for non-Iso Tx, Iso Tx and
++ Rx transfers accordingly.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - Values: 0 to 7 (default 0)
++ Bit values indicate:
++ - 0: Thresholding disabled
++ - 1: Thresholding enabled
++ </td></tr>
++
++<tr>
++ <td>dma_desc_enable</td>
++ <td>Specifies whether to enable Descriptor DMA mode.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: Descriptor DMA disabled
++ - 1: Descriptor DMA (default, if available)
++ </td></tr>
++
++<tr>
++ <td>mpi_enable</td>
++ <td>Specifies whether to enable MPI enhancement mode.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: MPI disabled (default)
++ - 1: MPI enable
++ </td></tr>
++
++<tr>
++ <td>pti_enable</td>
++ <td>Specifies whether to enable PTI enhancement support.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: PTI disabled (default)
++ - 1: PTI enable
++ </td></tr>
++
++<tr>
++ <td>lpm_enable</td>
++ <td>Specifies whether to enable LPM support.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: LPM disabled
++ - 1: LPM enable (default, if available)
++ </td></tr>
++
++<tr>
++ <td>ic_usb_cap</td>
++ <td>Specifies whether to enable IC_USB capability.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: IC_USB disabled (default, if available)
++ - 1: IC_USB enable
++ </td></tr>
++
++<tr>
++ <td>ahb_thr_ratio</td>
++ <td>Specifies AHB Threshold ratio.
++ - Values: 0 to 3 (default 0)
++ </td></tr>
++
++<tr>
++ <td>power_down</td>
++ <td>Specifies Power Down(Hibernation) Mode.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: Power Down disabled (default)
++ - 2: Power Down enabled
++ </td></tr>
++
++ <tr>
++ <td>reload_ctl</td>
++ <td>Specifies whether dynamic reloading of the HFIR register is allowed during
++ run time. The driver will automatically detect the value for this parameter if
++ none is specified. In case the HFIR value is reloaded when HFIR.RldCtrl == 1'b0
++ the core might misbehave.
++ - 0: Reload Control disabled (default)
++ - 1: Reload Control enabled
++ </td></tr>
++
++ <tr>
++ <td>dev_out_nak</td>
++ <td>Specifies whether  Device OUT NAK enhancement enabled or no.
++ The driver will automatically detect the value for this parameter if
++ none is specified. This parameter is valid only when OTG_EN_DESC_DMA == 1b1.
++ - 0: The core does not set NAK after Bulk OUT transfer complete (default)
++ - 1: The core sets NAK after Bulk OUT transfer complete
++ </td></tr>
++
++ <tr>
++ <td>cont_on_bna</td>
++ <td>Specifies whether Enable Continue on BNA enabled or no.
++ After receiving BNA interrupt the core disables the endpoint,when the
++ endpoint is re-enabled by the application the
++ - 0: Core starts processing from the DOEPDMA descriptor (default)
++ - 1: Core starts processing from the descriptor which received the BNA.
++ This parameter is valid only when OTG_EN_DESC_DMA == 1b1.
++ </td></tr>
++
++ <tr>
++ <td>ahb_single</td>
++ <td>This bit when programmed supports SINGLE transfers for remainder data
++ in a transfer for DMA mode of operation.
++ - 0: The remainder data will be sent using INCR burst size (default)
++ - 1: The remainder data will be sent using SINGLE burst size.
++ </td></tr>
++
++<tr>
++ <td>adp_enable</td>
++ <td>Specifies whether ADP feature is enabled.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: ADP feature disabled (default)
++ - 1: ADP feature enabled
++ </td></tr>
++
++  <tr>
++ <td>otg_ver</td>
++ <td>Specifies whether OTG is performing as USB OTG Revision 2.0 or Revision 1.3
++ USB OTG device.
++ - 0: OTG 2.0 support disabled (default)
++ - 1: OTG 2.0 support enabled
++ </td></tr>
++
++*/
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_driver.h linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_driver.h
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_driver.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_driver.h	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,86 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.h $
++ * $Revision: #19 $
++ * $Date: 2010/11/15 $
++ * $Change: 1627671 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#ifndef __DWC_OTG_DRIVER_H__
++#define __DWC_OTG_DRIVER_H__
++
++/** @file
++ * This file contains the interface to the Linux driver.
++ */
++#include "dwc_otg_os_dep.h"
++#include "dwc_otg_core_if.h"
++
++/* Type declarations */
++struct dwc_otg_pcd;
++struct dwc_otg_hcd;
++
++/**
++ * This structure is a wrapper that encapsulates the driver components used to
++ * manage a single DWC_otg controller.
++ */
++typedef struct dwc_otg_device {
++	/** Structure containing OS-dependent stuff. KEEP THIS STRUCT AT THE
++	 * VERY BEGINNING OF THE DEVICE STRUCT. OSes such as FreeBSD and NetBSD
++	 * require this. */
++	struct os_dependent os_dep;
++
++	/** Pointer to the core interface structure. */
++	dwc_otg_core_if_t *core_if;
++
++	/** Pointer to the PCD structure. */
++	struct dwc_otg_pcd *pcd;
++
++	/** Pointer to the HCD structure. */
++	struct dwc_otg_hcd *hcd;
++
++	/** Flag to indicate whether the common IRQ handler is installed. */
++	uint8_t common_irq_installed;
++
++} dwc_otg_device_t;
++
++/*We must clear S3C24XX_EINTPEND external interrupt register
++ * because after clearing in this register trigerred IRQ from
++ * H/W core in kernel interrupt can be occured again before OTG
++ * handlers clear all IRQ sources of Core registers because of
++ * timing latencies and Low Level IRQ Type.
++ */
++#ifdef CONFIG_MACH_IPMATE
++#define  S3C2410X_CLEAR_EINTPEND()   \
++do { \
++	__raw_writel(1UL << 11,S3C24XX_EINTPEND); \
++} while (0)
++#else
++#define  S3C2410X_CLEAR_EINTPEND()   do { } while (0)
++#endif
++
++#endif
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_hcd.c linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_hcd.c
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_hcd.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_hcd.c	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,3685 @@
++
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.c $
++ * $Revision: #104 $
++ * $Date: 2011/10/24 $
++ * $Change: 1871159 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++/** @file
++ * This file implements HCD Core. All code in this file is portable and doesn't
++ * use any OS specific functions.
++ * Interface provided by HCD Core is defined in <code><hcd_if.h></code>
++ * header file.
++ */
++
++#include <linux/usb.h>
++#include <linux/usb/hcd.h>
++
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_regs.h"
++#include "dwc_otg_mphi_fix.h"
++
++extern bool microframe_schedule, nak_holdoff_enable;
++
++//#define DEBUG_HOST_CHANNELS
++#ifdef DEBUG_HOST_CHANNELS
++static int last_sel_trans_num_per_scheduled = 0;
++static int last_sel_trans_num_nonper_scheduled = 0;
++static int last_sel_trans_num_avail_hc_at_start = 0;
++static int last_sel_trans_num_avail_hc_at_end = 0;
++#endif /* DEBUG_HOST_CHANNELS */
++
++extern int g_next_sched_frame, g_np_count, g_np_sent;
++
++extern haint_data_t haint_saved;
++extern hcintmsk_data_t hcintmsk_saved[MAX_EPS_CHANNELS];
++extern hcint_data_t hcint_saved[MAX_EPS_CHANNELS];
++extern gintsts_data_t ginsts_saved;
++
++dwc_otg_hcd_t *dwc_otg_hcd_alloc_hcd(void)
++{
++	return DWC_ALLOC(sizeof(dwc_otg_hcd_t));
++}
++
++/**
++ * Connection timeout function.  An OTG host is required to display a
++ * message if the device does not connect within 10 seconds.
++ */
++void dwc_otg_hcd_connect_timeout(void *ptr)
++{
++	DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, ptr);
++	DWC_PRINTF("Connect Timeout\n");
++	__DWC_ERROR("Device Not Connected/Responding\n");
++}
++
++#if defined(DEBUG)
++static void dump_channel_info(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	if (qh->channel != NULL) {
++		dwc_hc_t *hc = qh->channel;
++		dwc_list_link_t *item;
++		dwc_otg_qh_t *qh_item;
++		int num_channels = hcd->core_if->core_params->host_channels;
++		int i;
++
++		dwc_otg_hc_regs_t *hc_regs;
++		hcchar_data_t hcchar;
++		hcsplt_data_t hcsplt;
++		hctsiz_data_t hctsiz;
++		uint32_t hcdma;
++
++		hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num];
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++		hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt);
++		hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
++		hcdma = DWC_READ_REG32(&hc_regs->hcdma);
++
++		DWC_PRINTF("  Assigned to channel %p:\n", hc);
++		DWC_PRINTF("    hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32,
++			   hcsplt.d32);
++		DWC_PRINTF("    hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32,
++			   hcdma);
++		DWC_PRINTF("    dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
++			   hc->dev_addr, hc->ep_num, hc->ep_is_in);
++		DWC_PRINTF("    ep_type: %d\n", hc->ep_type);
++		DWC_PRINTF("    max_packet: %d\n", hc->max_packet);
++		DWC_PRINTF("    data_pid_start: %d\n", hc->data_pid_start);
++		DWC_PRINTF("    xfer_started: %d\n", hc->xfer_started);
++		DWC_PRINTF("    halt_status: %d\n", hc->halt_status);
++		DWC_PRINTF("    xfer_buff: %p\n", hc->xfer_buff);
++		DWC_PRINTF("    xfer_len: %d\n", hc->xfer_len);
++		DWC_PRINTF("    qh: %p\n", hc->qh);
++		DWC_PRINTF("  NP inactive sched:\n");
++		DWC_LIST_FOREACH(item, &hcd->non_periodic_sched_inactive) {
++			qh_item =
++			    DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry);
++			DWC_PRINTF("    %p\n", qh_item);
++		}
++		DWC_PRINTF("  NP active sched:\n");
++		DWC_LIST_FOREACH(item, &hcd->non_periodic_sched_active) {
++			qh_item =
++			    DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry);
++			DWC_PRINTF("    %p\n", qh_item);
++		}
++		DWC_PRINTF("  Channels: \n");
++		for (i = 0; i < num_channels; i++) {
++			dwc_hc_t *hc = hcd->hc_ptr_array[i];
++			DWC_PRINTF("    %2d: %p\n", i, hc);
++		}
++	}
++}
++#else
++#define dump_channel_info(hcd, qh)
++#endif /* DEBUG */
++
++/**
++ * Work queue function for starting the HCD when A-Cable is connected.
++ * The hcd_start() must be called in a process context.
++ */
++static void hcd_start_func(void *_vp)
++{
++	dwc_otg_hcd_t *hcd = (dwc_otg_hcd_t *) _vp;
++
++	DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, hcd);
++	if (hcd) {
++		hcd->fops->start(hcd);
++	}
++}
++
++static void del_xfer_timers(dwc_otg_hcd_t * hcd)
++{
++#ifdef DEBUG
++	int i;
++	int num_channels = hcd->core_if->core_params->host_channels;
++	for (i = 0; i < num_channels; i++) {
++		DWC_TIMER_CANCEL(hcd->core_if->hc_xfer_timer[i]);
++	}
++#endif
++}
++
++static void del_timers(dwc_otg_hcd_t * hcd)
++{
++	del_xfer_timers(hcd);
++	DWC_TIMER_CANCEL(hcd->conn_timer);
++}
++
++/**
++ * Processes all the URBs in a single list of QHs. Completes them with
++ * -ESHUTDOWN and frees the QTD.
++ */
++static void kill_urbs_in_qh_list(dwc_otg_hcd_t * hcd, dwc_list_link_t * qh_list)
++{
++	dwc_list_link_t *qh_item, *qh_tmp;
++	dwc_otg_qh_t *qh;
++	dwc_otg_qtd_t *qtd, *qtd_tmp;
++
++	DWC_LIST_FOREACH_SAFE(qh_item, qh_tmp, qh_list) {
++		qh = DWC_LIST_ENTRY(qh_item, dwc_otg_qh_t, qh_list_entry);
++		DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp,
++					 &qh->qtd_list, qtd_list_entry) {
++			qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list);
++			if (qtd->urb != NULL) {
++				hcd->fops->complete(hcd, qtd->urb->priv,
++						    qtd->urb, -DWC_E_SHUTDOWN);
++				dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh);
++			}
++
++		}
++		if(qh->channel) {
++			/* Using hcchar.chen == 1 is not a reliable test.
++			 * It is possible that the channel has already halted
++			 * but not yet been through the IRQ handler.
++			 */
++			dwc_otg_hc_halt(hcd->core_if, qh->channel,
++				DWC_OTG_HC_XFER_URB_DEQUEUE);
++			if(microframe_schedule)
++				hcd->available_host_channels++;
++			qh->channel = NULL;
++		}
++		dwc_otg_hcd_qh_remove(hcd, qh);
++	}
++}
++
++/**
++ * Responds with an error status of ESHUTDOWN to all URBs in the non-periodic
++ * and periodic schedules. The QTD associated with each URB is removed from
++ * the schedule and freed. This function may be called when a disconnect is
++ * detected or when the HCD is being stopped.
++ */
++static void kill_all_urbs(dwc_otg_hcd_t * hcd)
++{
++	kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_inactive);
++	kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_active);
++	kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_inactive);
++	kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_ready);
++	kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_assigned);
++	kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_queued);
++}
++
++/**
++ * Start the connection timer.  An OTG host is required to display a
++ * message if the device does not connect within 10 seconds.  The
++ * timer is deleted if a port connect interrupt occurs before the
++ * timer expires.
++ */
++static void dwc_otg_hcd_start_connect_timer(dwc_otg_hcd_t * hcd)
++{
++	DWC_TIMER_SCHEDULE(hcd->conn_timer, 10000 /* 10 secs */ );
++}
++
++/**
++ * HCD Callback function for disconnect of the HCD.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_session_start_cb(void *p)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd;
++	DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
++	dwc_otg_hcd = p;
++	dwc_otg_hcd_start_connect_timer(dwc_otg_hcd);
++	return 1;
++}
++
++/**
++ * HCD Callback function for starting the HCD when A-Cable is
++ * connected.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_start_cb(void *p)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = p;
++	dwc_otg_core_if_t *core_if;
++	hprt0_data_t hprt0;
++
++	core_if = dwc_otg_hcd->core_if;
++
++	if (core_if->op_state == B_HOST) {
++		/*
++		 * Reset the port.  During a HNP mode switch the reset
++		 * needs to occur within 1ms and have a duration of at
++		 * least 50ms.
++		 */
++		hprt0.d32 = dwc_otg_read_hprt0(core_if);
++		hprt0.b.prtrst = 1;
++		DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++	}
++	DWC_WORKQ_SCHEDULE_DELAYED(core_if->wq_otg,
++				   hcd_start_func, dwc_otg_hcd, 50,
++				   "start hcd");
++
++	return 1;
++}
++
++/**
++ * HCD Callback function for disconnect of the HCD.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_disconnect_cb(void *p)
++{
++	gintsts_data_t intr;
++	dwc_otg_hcd_t *dwc_otg_hcd = p;
++
++	/*
++	 * Set status flags for the hub driver.
++	 */
++	dwc_otg_hcd->flags.b.port_connect_status_change = 1;
++	dwc_otg_hcd->flags.b.port_connect_status = 0;
++	if(fiq_fix_enable)
++		local_fiq_disable();
++	/*
++	 * Shutdown any transfers in process by clearing the Tx FIFO Empty
++	 * interrupt mask and status bits and disabling subsequent host
++	 * channel interrupts.
++	 */
++	intr.d32 = 0;
++	intr.b.nptxfempty = 1;
++	intr.b.ptxfempty = 1;
++	intr.b.hcintr = 1;
++	DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk,
++			 intr.d32, 0);
++	DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintsts,
++			 intr.d32, 0);
++
++	del_timers(dwc_otg_hcd);
++
++	/*
++	 * Turn off the vbus power only if the core has transitioned to device
++	 * mode. If still in host mode, need to keep power on to detect a
++	 * reconnection.
++	 */
++	if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) {
++		if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) {
++			hprt0_data_t hprt0 = {.d32 = 0 };
++			DWC_PRINTF("Disconnect: PortPower off\n");
++			hprt0.b.prtpwr = 0;
++			DWC_WRITE_REG32(dwc_otg_hcd->core_if->host_if->hprt0,
++					hprt0.d32);
++		}
++
++		dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if);
++	}
++
++	/* Respond with an error status to all URBs in the schedule. */
++	kill_all_urbs(dwc_otg_hcd);
++
++	if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) {
++		/* Clean up any host channels that were in use. */
++		int num_channels;
++		int i;
++		dwc_hc_t *channel;
++		dwc_otg_hc_regs_t *hc_regs;
++		hcchar_data_t hcchar;
++
++		num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
++
++		if (!dwc_otg_hcd->core_if->dma_enable) {
++			/* Flush out any channel requests in slave mode. */
++			for (i = 0; i < num_channels; i++) {
++				channel = dwc_otg_hcd->hc_ptr_array[i];
++				if (DWC_CIRCLEQ_EMPTY_ENTRY
++				    (channel, hc_list_entry)) {
++					hc_regs =
++					    dwc_otg_hcd->core_if->
++					    host_if->hc_regs[i];
++					hcchar.d32 =
++					    DWC_READ_REG32(&hc_regs->hcchar);
++					if (hcchar.b.chen) {
++						hcchar.b.chen = 0;
++						hcchar.b.chdis = 1;
++						hcchar.b.epdir = 0;
++						DWC_WRITE_REG32
++						    (&hc_regs->hcchar,
++						     hcchar.d32);
++					}
++				}
++			}
++		}
++
++		for (i = 0; i < num_channels; i++) {
++			channel = dwc_otg_hcd->hc_ptr_array[i];
++			if (DWC_CIRCLEQ_EMPTY_ENTRY(channel, hc_list_entry)) {
++				hc_regs =
++				    dwc_otg_hcd->core_if->host_if->hc_regs[i];
++				hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++				if (hcchar.b.chen) {
++					/* Halt the channel. */
++					hcchar.b.chdis = 1;
++					DWC_WRITE_REG32(&hc_regs->hcchar,
++							hcchar.d32);
++				}
++
++				dwc_otg_hc_cleanup(dwc_otg_hcd->core_if,
++						   channel);
++				DWC_CIRCLEQ_INSERT_TAIL
++				    (&dwc_otg_hcd->free_hc_list, channel,
++				     hc_list_entry);
++				/*
++				 * Added for Descriptor DMA to prevent channel double cleanup
++				 * in release_channel_ddma(). Which called from ep_disable
++				 * when device disconnect.
++				 */
++				channel->qh = NULL;
++			}
++		}
++		if(fiq_split_enable) {
++			for(i=0; i < 128; i++) {
++				dwc_otg_hcd->hub_port[i] = 0;
++			}
++			haint_saved.d32 = 0;
++			for(i=0; i < MAX_EPS_CHANNELS; i++) {
++				hcint_saved[i].d32 = 0;
++				hcintmsk_saved[i].d32 = 0;
++			}
++		}
++
++	}
++
++	if(fiq_fix_enable)
++		local_fiq_enable();
++
++	if (dwc_otg_hcd->fops->disconnect) {
++		dwc_otg_hcd->fops->disconnect(dwc_otg_hcd);
++	}
++
++	return 1;
++}
++
++/**
++ * HCD Callback function for stopping the HCD.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_stop_cb(void *p)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = p;
++
++	DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
++	dwc_otg_hcd_stop(dwc_otg_hcd);
++	return 1;
++}
++
++#ifdef CONFIG_USB_DWC_OTG_LPM
++/**
++ * HCD Callback function for sleep of HCD.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int dwc_otg_hcd_sleep_cb(void *p)
++{
++	dwc_otg_hcd_t *hcd = p;
++
++	dwc_otg_hcd_free_hc_from_lpm(hcd);
++
++	return 0;
++}
++#endif
++
++
++/**
++ * HCD Callback function for Remote Wakeup.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int dwc_otg_hcd_rem_wakeup_cb(void *p)
++{
++	dwc_otg_hcd_t *hcd = p;
++
++	if (hcd->core_if->lx_state == DWC_OTG_L2) {
++		hcd->flags.b.port_suspend_change = 1;
++	}
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	else {
++		hcd->flags.b.port_l1_change = 1;
++	}
++#endif
++	return 0;
++}
++
++/**
++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
++ * stopped.
++ */
++void dwc_otg_hcd_stop(dwc_otg_hcd_t * hcd)
++{
++	hprt0_data_t hprt0 = {.d32 = 0 };
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n");
++
++	/*
++	 * The root hub should be disconnected before this function is called.
++	 * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue)
++	 * and the QH lists (via ..._hcd_endpoint_disable).
++	 */
++
++	/* Turn off all host-specific interrupts. */
++	dwc_otg_disable_host_interrupts(hcd->core_if);
++
++	/* Turn off the vbus power */
++	DWC_PRINTF("PortPower off\n");
++	hprt0.b.prtpwr = 0;
++	DWC_WRITE_REG32(hcd->core_if->host_if->hprt0, hprt0.d32);
++	dwc_mdelay(1);
++}
++
++int dwc_otg_hcd_urb_enqueue(dwc_otg_hcd_t * hcd,
++			    dwc_otg_hcd_urb_t * dwc_otg_urb, void **ep_handle,
++			    int atomic_alloc)
++{
++	int retval = 0;
++	uint8_t needs_scheduling = 0;
++	dwc_otg_transaction_type_e tr_type;
++	dwc_otg_qtd_t *qtd;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	hprt0_data_t hprt0 = { .d32 = 0 };
++
++#ifdef DEBUG /* integrity checks (Broadcom) */
++	if (NULL == hcd->core_if) {
++		DWC_ERROR("**** DWC OTG HCD URB Enqueue - HCD has NULL core_if\n");
++		/* No longer connected. */
++		return -DWC_E_INVALID;
++	}
++#endif
++	if (!hcd->flags.b.port_connect_status) {
++		/* No longer connected. */
++		DWC_ERROR("Not connected\n");
++		return -DWC_E_NO_DEVICE;
++	}
++
++	/* Some core configurations cannot support LS traffic on a FS root port */
++	if ((hcd->fops->speed(hcd, dwc_otg_urb->priv) == USB_SPEED_LOW) &&
++		(hcd->core_if->hwcfg2.b.fs_phy_type == 1) &&
++		(hcd->core_if->hwcfg2.b.hs_phy_type == 1)) {
++			hprt0.d32 = DWC_READ_REG32(hcd->core_if->host_if->hprt0);
++			if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_FULL_SPEED) {
++				return -DWC_E_NO_DEVICE;
++			}
++	}
++
++	qtd = dwc_otg_hcd_qtd_create(dwc_otg_urb, atomic_alloc);
++	if (qtd == NULL) {
++		DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n");
++		return -DWC_E_NO_MEMORY;
++	}
++#ifdef DEBUG /* integrity checks (Broadcom) */
++	if (qtd->urb == NULL) {
++		DWC_ERROR("**** DWC OTG HCD URB Enqueue created QTD with no URBs\n");
++		return -DWC_E_NO_MEMORY;
++	}
++	if (qtd->urb->priv == NULL) {
++		DWC_ERROR("**** DWC OTG HCD URB Enqueue created QTD URB with no URB handle\n");
++		return -DWC_E_NO_MEMORY;
++	}
++#endif
++	intr_mask.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->gintmsk);
++	if(!intr_mask.b.sofintr) needs_scheduling = 1;
++	if((((dwc_otg_qh_t *)ep_handle)->ep_type == UE_BULK) && !(qtd->urb->flags & URB_GIVEBACK_ASAP))
++		/* Do not schedule SG transactions until qtd has URB_GIVEBACK_ASAP set */
++		needs_scheduling = 0;
++
++	retval = dwc_otg_hcd_qtd_add(qtd, hcd, (dwc_otg_qh_t **) ep_handle, atomic_alloc);
++            // creates a new queue in ep_handle if it doesn't exist already
++	if (retval < 0) {
++		DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. "
++			  "Error status %d\n", retval);
++		dwc_otg_hcd_qtd_free(qtd);
++		return retval;
++	}
++
++	if(needs_scheduling) {
++		tr_type = dwc_otg_hcd_select_transactions(hcd);
++		if (tr_type != DWC_OTG_TRANSACTION_NONE) {
++			dwc_otg_hcd_queue_transactions(hcd, tr_type);
++		}
++	}
++	return retval;
++}
++
++int dwc_otg_hcd_urb_dequeue(dwc_otg_hcd_t * hcd,
++			    dwc_otg_hcd_urb_t * dwc_otg_urb)
++{
++	dwc_otg_qh_t *qh;
++	dwc_otg_qtd_t *urb_qtd;
++	BUG_ON(!hcd);
++	BUG_ON(!dwc_otg_urb);
++
++#ifdef DEBUG /* integrity checks (Broadcom) */
++
++	if (hcd == NULL) {
++		DWC_ERROR("**** DWC OTG HCD URB Dequeue has NULL HCD\n");
++		return -DWC_E_INVALID;
++	}
++	if (dwc_otg_urb == NULL) {
++		DWC_ERROR("**** DWC OTG HCD URB Dequeue has NULL URB\n");
++		return -DWC_E_INVALID;
++	}
++	if (dwc_otg_urb->qtd == NULL) {
++		DWC_ERROR("**** DWC OTG HCD URB Dequeue with NULL QTD\n");
++		return -DWC_E_INVALID;
++	}
++	urb_qtd = dwc_otg_urb->qtd;
++	BUG_ON(!urb_qtd);
++	if (urb_qtd->qh == NULL) {
++		DWC_ERROR("**** DWC OTG HCD URB Dequeue with QTD with NULL Q handler\n");
++		return -DWC_E_INVALID;
++	}
++#else
++	urb_qtd = dwc_otg_urb->qtd;
++	BUG_ON(!urb_qtd);
++#endif
++	qh = urb_qtd->qh;
++	BUG_ON(!qh);
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		if (urb_qtd->in_process) {
++			dump_channel_info(hcd, qh);
++		}
++	}
++#ifdef DEBUG /* integrity checks (Broadcom) */
++	if (hcd->core_if == NULL) {
++		DWC_ERROR("**** DWC OTG HCD URB Dequeue HCD has NULL core_if\n");
++		return -DWC_E_INVALID;
++	}
++#endif
++	if (urb_qtd->in_process && qh->channel) {
++		/* The QTD is in process (it has been assigned to a channel). */
++		if (hcd->flags.b.port_connect_status) {
++			/*
++			 * If still connected (i.e. in host mode), halt the
++			 * channel so it can be used for other transfers. If
++			 * no longer connected, the host registers can't be
++			 * written to halt the channel since the core is in
++			 * device mode.
++			 */
++			dwc_otg_hc_halt(hcd->core_if, qh->channel,
++					DWC_OTG_HC_XFER_URB_DEQUEUE);
++
++			dwc_otg_hcd_release_port(hcd, qh);
++		}
++	}
++
++	/*
++	 * Free the QTD and clean up the associated QH. Leave the QH in the
++	 * schedule if it has any remaining QTDs.
++	 */
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue - "
++                    "delete %sQueue handler\n",
++                    hcd->core_if->dma_desc_enable?"DMA ":"");
++	if (!hcd->core_if->dma_desc_enable) {
++		uint8_t b = urb_qtd->in_process;
++		dwc_otg_hcd_qtd_remove_and_free(hcd, urb_qtd, qh);
++		if (b) {
++			dwc_otg_hcd_qh_deactivate(hcd, qh, 0);
++			qh->channel = NULL;
++		} else if (DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) {
++			dwc_otg_hcd_qh_remove(hcd, qh);
++		}
++	} else {
++		dwc_otg_hcd_qtd_remove_and_free(hcd, urb_qtd, qh);
++	}
++	return 0;
++}
++
++int dwc_otg_hcd_endpoint_disable(dwc_otg_hcd_t * hcd, void *ep_handle,
++				 int retry)
++{
++	dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle;
++	int retval = 0;
++	dwc_irqflags_t flags;
++
++	if (retry < 0) {
++		retval = -DWC_E_INVALID;
++		goto done;
++	}
++
++	if (!qh) {
++		retval = -DWC_E_INVALID;
++		goto done;
++	}
++
++	DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
++
++	while (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list) && retry) {
++		DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
++		retry--;
++		dwc_msleep(5);
++		DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
++	}
++
++	dwc_otg_hcd_qh_remove(hcd, qh);
++
++	DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
++	/*
++	 * Split dwc_otg_hcd_qh_remove_and_free() into qh_remove
++	 * and qh_free to prevent stack dump on DWC_DMA_FREE() with
++	 * irq_disabled (spinlock_irqsave) in dwc_otg_hcd_desc_list_free()
++	 * and dwc_otg_hcd_frame_list_alloc().
++	 */
++	dwc_otg_hcd_qh_free(hcd, qh);
++
++done:
++	return retval;
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)
++int dwc_otg_hcd_endpoint_reset(dwc_otg_hcd_t * hcd, void *ep_handle)
++{
++	int retval = 0;
++	dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle;
++	if (!qh)
++		return -DWC_E_INVALID;
++
++	qh->data_toggle = DWC_OTG_HC_PID_DATA0;
++	return retval;
++}
++#endif
++
++/**
++ * HCD Callback structure for handling mode switching.
++ */
++static dwc_otg_cil_callbacks_t hcd_cil_callbacks = {
++	.start = dwc_otg_hcd_start_cb,
++	.stop = dwc_otg_hcd_stop_cb,
++	.disconnect = dwc_otg_hcd_disconnect_cb,
++	.session_start = dwc_otg_hcd_session_start_cb,
++	.resume_wakeup = dwc_otg_hcd_rem_wakeup_cb,
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	.sleep = dwc_otg_hcd_sleep_cb,
++#endif
++	.p = 0,
++};
++
++/**
++ * Reset tasklet function
++ */
++static void reset_tasklet_func(void *data)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t *) data;
++	dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
++	hprt0_data_t hprt0;
++
++	DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n");
++
++	hprt0.d32 = dwc_otg_read_hprt0(core_if);
++	hprt0.b.prtrst = 1;
++	DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++	dwc_mdelay(60);
++
++	hprt0.b.prtrst = 0;
++	DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++	dwc_otg_hcd->flags.b.port_reset_change = 1;
++}
++
++static void completion_tasklet_func(void *ptr)
++{
++	dwc_otg_hcd_t *hcd = (dwc_otg_hcd_t *) ptr;
++	struct urb *urb;
++	urb_tq_entry_t *item;
++	dwc_irqflags_t flags;
++
++	/* This could just be spin_lock_irq */
++	DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
++	while (!DWC_TAILQ_EMPTY(&hcd->completed_urb_list)) {
++		item = DWC_TAILQ_FIRST(&hcd->completed_urb_list);
++		urb = item->urb;
++		DWC_TAILQ_REMOVE(&hcd->completed_urb_list, item,
++				urb_tq_entries);
++		DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
++		DWC_FREE(item);
++
++		usb_hcd_giveback_urb(hcd->priv, urb, urb->status);
++
++		fiq_print(FIQDBG_PORTHUB, "COMPLETE");
++
++		DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
++	}
++	DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
++	return;
++}
++
++static void qh_list_free(dwc_otg_hcd_t * hcd, dwc_list_link_t * qh_list)
++{
++	dwc_list_link_t *item;
++	dwc_otg_qh_t *qh;
++	dwc_irqflags_t flags;
++
++	if (!qh_list->next) {
++		/* The list hasn't been initialized yet. */
++		return;
++	}
++	/*
++	 * Hold spinlock here. Not needed in that case if bellow
++	 * function is being called from ISR
++	 */
++	DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
++	/* Ensure there are no QTDs or URBs left. */
++	kill_urbs_in_qh_list(hcd, qh_list);
++	DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
++
++	DWC_LIST_FOREACH(item, qh_list) {
++		qh = DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry);
++		dwc_otg_hcd_qh_remove_and_free(hcd, qh);
++	}
++}
++
++/**
++ * Exit from Hibernation if Host did not detect SRP from connected SRP capable
++ * Device during SRP time by host power up.
++ */
++void dwc_otg_hcd_power_up(void *ptr)
++{
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++	dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr;
++
++	DWC_PRINTF("%s called\n", __FUNCTION__);
++
++	if (!core_if->hibernation_suspend) {
++		DWC_PRINTF("Already exited from Hibernation\n");
++		return;
++	}
++
++	/* Switch on the voltage to the core */
++	gpwrdn.b.pwrdnswtch = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Reset the core */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Disable power clamps */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnclmp = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	/* Remove reset the core signal */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++	dwc_udelay(10);
++
++	/* Disable PMU interrupt */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuintsel = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	core_if->hibernation_suspend = 0;
++
++	/* Disable PMU */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuactv = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Enable VBUS */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.dis_vbus = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	core_if->op_state = A_HOST;
++	dwc_otg_core_init(core_if);
++	dwc_otg_enable_global_interrupts(core_if);
++	cil_hcd_start(core_if);
++}
++
++/**
++ * Frees secondary storage associated with the dwc_otg_hcd structure contained
++ * in the struct usb_hcd field.
++ */
++static void dwc_otg_hcd_free(dwc_otg_hcd_t * dwc_otg_hcd)
++{
++	int i;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n");
++
++	del_timers(dwc_otg_hcd);
++
++	/* Free memory for QH/QTD lists */
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_inactive);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued);
++
++	/* Free memory for the host channels. */
++	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++		dwc_hc_t *hc = dwc_otg_hcd->hc_ptr_array[i];
++
++#ifdef DEBUG
++		if (dwc_otg_hcd->core_if->hc_xfer_timer[i]) {
++			DWC_TIMER_FREE(dwc_otg_hcd->core_if->hc_xfer_timer[i]);
++		}
++#endif
++		if (hc != NULL) {
++			DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n",
++				    i, hc);
++			DWC_FREE(hc);
++		}
++	}
++
++	if (dwc_otg_hcd->core_if->dma_enable) {
++		if (dwc_otg_hcd->status_buf_dma) {
++			DWC_DMA_FREE(DWC_OTG_HCD_STATUS_BUF_SIZE,
++				     dwc_otg_hcd->status_buf,
++				     dwc_otg_hcd->status_buf_dma);
++		}
++	} else if (dwc_otg_hcd->status_buf != NULL) {
++		DWC_FREE(dwc_otg_hcd->status_buf);
++	}
++	DWC_SPINLOCK_FREE(dwc_otg_hcd->channel_lock);
++	DWC_SPINLOCK_FREE(dwc_otg_hcd->lock);
++	/* Set core_if's lock pointer to NULL */
++	dwc_otg_hcd->core_if->lock = NULL;
++
++	DWC_TIMER_FREE(dwc_otg_hcd->conn_timer);
++	DWC_TASK_FREE(dwc_otg_hcd->reset_tasklet);
++	DWC_TASK_FREE(dwc_otg_hcd->completion_tasklet);
++
++#ifdef DWC_DEV_SRPCAP
++	if (dwc_otg_hcd->core_if->power_down == 2 &&
++	    dwc_otg_hcd->core_if->pwron_timer) {
++		DWC_TIMER_FREE(dwc_otg_hcd->core_if->pwron_timer);
++	}
++#endif
++	DWC_FREE(dwc_otg_hcd);
++}
++
++int init_hcd_usecs(dwc_otg_hcd_t *_hcd);
++
++int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd, dwc_otg_core_if_t * core_if)
++{
++	int retval = 0;
++	int num_channels;
++	int i;
++	dwc_hc_t *channel;
++
++	hcd->lock = DWC_SPINLOCK_ALLOC();
++	hcd->channel_lock = DWC_SPINLOCK_ALLOC();
++        DWC_DEBUGPL(DBG_HCDV, "init of HCD %p given core_if %p\n",
++                    hcd, core_if);
++	if (!hcd->lock) {
++		DWC_ERROR("Could not allocate lock for pcd");
++		DWC_FREE(hcd);
++		retval = -DWC_E_NO_MEMORY;
++		goto out;
++	}
++	hcd->core_if = core_if;
++
++	/* Register the HCD CIL Callbacks */
++	dwc_otg_cil_register_hcd_callbacks(hcd->core_if,
++					   &hcd_cil_callbacks, hcd);
++
++	/* Initialize the non-periodic schedule. */
++	DWC_LIST_INIT(&hcd->non_periodic_sched_inactive);
++	DWC_LIST_INIT(&hcd->non_periodic_sched_active);
++
++	/* Initialize the periodic schedule. */
++	DWC_LIST_INIT(&hcd->periodic_sched_inactive);
++	DWC_LIST_INIT(&hcd->periodic_sched_ready);
++	DWC_LIST_INIT(&hcd->periodic_sched_assigned);
++	DWC_LIST_INIT(&hcd->periodic_sched_queued);
++	DWC_TAILQ_INIT(&hcd->completed_urb_list);
++	/*
++	 * Create a host channel descriptor for each host channel implemented
++	 * in the controller. Initialize the channel descriptor array.
++	 */
++	DWC_CIRCLEQ_INIT(&hcd->free_hc_list);
++	num_channels = hcd->core_if->core_params->host_channels;
++	DWC_MEMSET(hcd->hc_ptr_array, 0, sizeof(hcd->hc_ptr_array));
++	for (i = 0; i < num_channels; i++) {
++		channel = DWC_ALLOC(sizeof(dwc_hc_t));
++		if (channel == NULL) {
++			retval = -DWC_E_NO_MEMORY;
++			DWC_ERROR("%s: host channel allocation failed\n",
++				  __func__);
++			dwc_otg_hcd_free(hcd);
++			goto out;
++		}
++		channel->hc_num = i;
++		hcd->hc_ptr_array[i] = channel;
++#ifdef DEBUG
++		hcd->core_if->hc_xfer_timer[i] =
++		    DWC_TIMER_ALLOC("hc timer", hc_xfer_timeout,
++				    &hcd->core_if->hc_xfer_info[i]);
++#endif
++		DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i,
++			    channel);
++	}
++
++	/* Initialize the Connection timeout timer. */
++	hcd->conn_timer = DWC_TIMER_ALLOC("Connection timer",
++					  dwc_otg_hcd_connect_timeout, 0);
++
++	printk(KERN_DEBUG "dwc_otg: Microframe scheduler %s\n", microframe_schedule ? "enabled":"disabled");
++	if (microframe_schedule)
++		init_hcd_usecs(hcd);
++
++	/* Initialize reset tasklet. */
++	hcd->reset_tasklet = DWC_TASK_ALLOC("reset_tasklet", reset_tasklet_func, hcd);
++
++	hcd->completion_tasklet = DWC_TASK_ALLOC("completion_tasklet",
++						completion_tasklet_func, hcd);
++#ifdef DWC_DEV_SRPCAP
++	if (hcd->core_if->power_down == 2) {
++		/* Initialize Power on timer for Host power up in case hibernation */
++		hcd->core_if->pwron_timer = DWC_TIMER_ALLOC("PWRON TIMER",
++									dwc_otg_hcd_power_up, core_if);
++	}
++#endif
++
++	/*
++	 * Allocate space for storing data on status transactions. Normally no
++	 * data is sent, but this space acts as a bit bucket. This must be
++	 * done after usb_add_hcd since that function allocates the DMA buffer
++	 * pool.
++	 */
++	if (hcd->core_if->dma_enable) {
++		hcd->status_buf =
++		    DWC_DMA_ALLOC(DWC_OTG_HCD_STATUS_BUF_SIZE,
++				  &hcd->status_buf_dma);
++	} else {
++		hcd->status_buf = DWC_ALLOC(DWC_OTG_HCD_STATUS_BUF_SIZE);
++	}
++	if (!hcd->status_buf) {
++		retval = -DWC_E_NO_MEMORY;
++		DWC_ERROR("%s: status_buf allocation failed\n", __func__);
++		dwc_otg_hcd_free(hcd);
++		goto out;
++	}
++
++	hcd->otg_port = 1;
++	hcd->frame_list = NULL;
++	hcd->frame_list_dma = 0;
++	hcd->periodic_qh_count = 0;
++
++	DWC_MEMSET(hcd->hub_port, 0, sizeof(hcd->hub_port));
++#ifdef FIQ_DEBUG
++	DWC_MEMSET(hcd->hub_port_alloc, -1, sizeof(hcd->hub_port_alloc));
++#endif
++
++out:
++	return retval;
++}
++
++void dwc_otg_hcd_remove(dwc_otg_hcd_t * hcd)
++{
++	/* Turn off all host-specific interrupts. */
++	dwc_otg_disable_host_interrupts(hcd->core_if);
++
++	dwc_otg_hcd_free(hcd);
++}
++
++/**
++ * Initializes dynamic portions of the DWC_otg HCD state.
++ */
++static void dwc_otg_hcd_reinit(dwc_otg_hcd_t * hcd)
++{
++	int num_channels;
++	int i;
++	dwc_hc_t *channel;
++	dwc_hc_t *channel_tmp;
++
++	hcd->flags.d32 = 0;
++
++	hcd->non_periodic_qh_ptr = &hcd->non_periodic_sched_active;
++	if (!microframe_schedule) {
++		hcd->non_periodic_channels = 0;
++		hcd->periodic_channels = 0;
++	} else {
++		hcd->available_host_channels = hcd->core_if->core_params->host_channels;
++	}
++	/*
++	 * Put all channels in the free channel list and clean up channel
++	 * states.
++	 */
++	DWC_CIRCLEQ_FOREACH_SAFE(channel, channel_tmp,
++				 &hcd->free_hc_list, hc_list_entry) {
++		DWC_CIRCLEQ_REMOVE(&hcd->free_hc_list, channel, hc_list_entry);
++	}
++
++	num_channels = hcd->core_if->core_params->host_channels;
++	for (i = 0; i < num_channels; i++) {
++		channel = hcd->hc_ptr_array[i];
++		DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, channel,
++					hc_list_entry);
++		dwc_otg_hc_cleanup(hcd->core_if, channel);
++	}
++
++	/* Initialize the DWC core for host mode operation. */
++	dwc_otg_core_host_init(hcd->core_if);
++
++	/* Set core_if's lock pointer to the hcd->lock */
++	hcd->core_if->lock = hcd->lock;
++}
++
++/**
++ * Assigns transactions from a QTD to a free host channel and initializes the
++ * host channel to perform the transactions. The host channel is removed from
++ * the free list.
++ *
++ * @param hcd The HCD state structure.
++ * @param qh Transactions from the first QTD for this QH are selected and
++ * assigned to a free host channel.
++ */
++static void assign_and_init_hc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	dwc_hc_t *hc;
++	dwc_otg_qtd_t *qtd;
++	dwc_otg_hcd_urb_t *urb;
++	void* ptr = NULL;
++
++	qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list);
++
++	urb = qtd->urb;
++
++	DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p) - urb %x, actual_length %d\n", __func__, hcd, qh, (unsigned int)urb, urb->actual_length);
++
++	if (((urb->actual_length < 0) || (urb->actual_length > urb->length)) && !dwc_otg_hcd_is_pipe_in(&urb->pipe_info))
++		urb->actual_length = urb->length;
++
++
++	hc = DWC_CIRCLEQ_FIRST(&hcd->free_hc_list);
++
++	/* Remove the host channel from the free list. */
++	DWC_CIRCLEQ_REMOVE_INIT(&hcd->free_hc_list, hc, hc_list_entry);
++
++	qh->channel = hc;
++
++	qtd->in_process = 1;
++
++	/*
++	 * Use usb_pipedevice to determine device address. This address is
++	 * 0 before the SET_ADDRESS command and the correct address afterward.
++	 */
++	hc->dev_addr = dwc_otg_hcd_get_dev_addr(&urb->pipe_info);
++	hc->ep_num = dwc_otg_hcd_get_ep_num(&urb->pipe_info);
++	hc->speed = qh->dev_speed;
++	hc->max_packet = dwc_max_packet(qh->maxp);
++
++	hc->xfer_started = 0;
++	hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS;
++	hc->error_state = (qtd->error_count > 0);
++	hc->halt_on_queue = 0;
++	hc->halt_pending = 0;
++	hc->requests = 0;
++
++	/*
++	 * The following values may be modified in the transfer type section
++	 * below. The xfer_len value may be reduced when the transfer is
++	 * started to accommodate the max widths of the XferSize and PktCnt
++	 * fields in the HCTSIZn register.
++	 */
++
++	hc->ep_is_in = (dwc_otg_hcd_is_pipe_in(&urb->pipe_info) != 0);
++	if (hc->ep_is_in) {
++		hc->do_ping = 0;
++	} else {
++		hc->do_ping = qh->ping_state;
++	}
++
++	hc->data_pid_start = qh->data_toggle;
++	hc->multi_count = 1;
++
++	if (hcd->core_if->dma_enable) {
++		hc->xfer_buff = (uint8_t *) urb->dma + urb->actual_length;
++
++		/* For non-dword aligned case */
++		if (((unsigned long)hc->xfer_buff & 0x3)
++		    && !hcd->core_if->dma_desc_enable) {
++			ptr = (uint8_t *) urb->buf + urb->actual_length;
++		}
++	} else {
++		hc->xfer_buff = (uint8_t *) urb->buf + urb->actual_length;
++	}
++	hc->xfer_len = urb->length - urb->actual_length;
++	hc->xfer_count = 0;
++
++	/*
++	 * Set the split attributes
++	 */
++	hc->do_split = 0;
++	if (qh->do_split) {
++		uint32_t hub_addr, port_addr;
++		hc->do_split = 1;
++		hc->xact_pos = qtd->isoc_split_pos;
++		/* We don't need to do complete splits anymore */
++		if(fiq_split_enable)
++			hc->complete_split = qtd->complete_split = 0;
++		else
++			hc->complete_split = qtd->complete_split;
++
++		hcd->fops->hub_info(hcd, urb->priv, &hub_addr, &port_addr);
++		hc->hub_addr = (uint8_t) hub_addr;
++		hc->port_addr = (uint8_t) port_addr;
++	}
++
++	switch (dwc_otg_hcd_get_pipe_type(&urb->pipe_info)) {
++	case UE_CONTROL:
++		hc->ep_type = DWC_OTG_EP_TYPE_CONTROL;
++		switch (qtd->control_phase) {
++		case DWC_OTG_CONTROL_SETUP:
++			DWC_DEBUGPL(DBG_HCDV, "  Control setup transaction\n");
++			hc->do_ping = 0;
++			hc->ep_is_in = 0;
++			hc->data_pid_start = DWC_OTG_HC_PID_SETUP;
++			if (hcd->core_if->dma_enable) {
++				hc->xfer_buff = (uint8_t *) urb->setup_dma;
++			} else {
++				hc->xfer_buff = (uint8_t *) urb->setup_packet;
++			}
++			hc->xfer_len = 8;
++			ptr = NULL;
++			break;
++		case DWC_OTG_CONTROL_DATA:
++			DWC_DEBUGPL(DBG_HCDV, "  Control data transaction\n");
++			hc->data_pid_start = qtd->data_toggle;
++			break;
++		case DWC_OTG_CONTROL_STATUS:
++			/*
++			 * Direction is opposite of data direction or IN if no
++			 * data.
++			 */
++			DWC_DEBUGPL(DBG_HCDV, "  Control status transaction\n");
++			if (urb->length == 0) {
++				hc->ep_is_in = 1;
++			} else {
++				hc->ep_is_in =
++				    dwc_otg_hcd_is_pipe_out(&urb->pipe_info);
++			}
++			if (hc->ep_is_in) {
++				hc->do_ping = 0;
++			}
++
++			hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
++
++			hc->xfer_len = 0;
++			if (hcd->core_if->dma_enable) {
++				hc->xfer_buff = (uint8_t *) hcd->status_buf_dma;
++			} else {
++				hc->xfer_buff = (uint8_t *) hcd->status_buf;
++			}
++			ptr = NULL;
++			break;
++		}
++		break;
++	case UE_BULK:
++		hc->ep_type = DWC_OTG_EP_TYPE_BULK;
++		break;
++	case UE_INTERRUPT:
++		hc->ep_type = DWC_OTG_EP_TYPE_INTR;
++		break;
++	case UE_ISOCHRONOUS:
++		{
++			struct dwc_otg_hcd_iso_packet_desc *frame_desc;
++
++			hc->ep_type = DWC_OTG_EP_TYPE_ISOC;
++
++			if (hcd->core_if->dma_desc_enable)
++				break;
++
++			frame_desc = &urb->iso_descs[qtd->isoc_frame_index];
++
++			frame_desc->status = 0;
++
++			if (hcd->core_if->dma_enable) {
++				hc->xfer_buff = (uint8_t *) urb->dma;
++			} else {
++				hc->xfer_buff = (uint8_t *) urb->buf;
++			}
++			hc->xfer_buff +=
++			    frame_desc->offset + qtd->isoc_split_offset;
++			hc->xfer_len =
++			    frame_desc->length - qtd->isoc_split_offset;
++
++			/* For non-dword aligned buffers */
++			if (((unsigned long)hc->xfer_buff & 0x3)
++			    && hcd->core_if->dma_enable) {
++				ptr =
++				    (uint8_t *) urb->buf + frame_desc->offset +
++				    qtd->isoc_split_offset;
++			} else
++				ptr = NULL;
++
++			if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) {
++				if (hc->xfer_len <= 188) {
++					hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL;
++				} else {
++					hc->xact_pos =
++					    DWC_HCSPLIT_XACTPOS_BEGIN;
++				}
++			}
++		}
++		break;
++	}
++	/* non DWORD-aligned buffer case */
++	if (ptr) {
++		uint32_t buf_size;
++		if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
++			buf_size = hcd->core_if->core_params->max_transfer_size;
++		} else {
++			buf_size = 4096;
++		}
++		if (!qh->dw_align_buf) {
++			qh->dw_align_buf = DWC_DMA_ALLOC_ATOMIC(buf_size,
++							 &qh->dw_align_buf_dma);
++			if (!qh->dw_align_buf) {
++				DWC_ERROR
++				    ("%s: Failed to allocate memory to handle "
++				     "non-dword aligned buffer case\n",
++				     __func__);
++				return;
++			}
++		}
++		if (!hc->ep_is_in) {
++			dwc_memcpy(qh->dw_align_buf, ptr, hc->xfer_len);
++		}
++		hc->align_buff = qh->dw_align_buf_dma;
++	} else {
++		hc->align_buff = 0;
++	}
++
++	if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++	    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++		/*
++		 * This value may be modified when the transfer is started to
++		 * reflect the actual transfer length.
++		 */
++		hc->multi_count = dwc_hb_mult(qh->maxp);
++	}
++
++	if (hcd->core_if->dma_desc_enable)
++		hc->desc_list_addr = qh->desc_list_dma;
++
++	dwc_otg_hc_init(hcd->core_if, hc);
++	hc->qh = qh;
++}
++
++/*
++** Check the transaction to see if the port / hub has already been assigned for
++** a split transaction
++**
++** Return 0 - Port is already in use
++*/
++int dwc_otg_hcd_allocate_port(dwc_otg_hcd_t * hcd, dwc_otg_qh_t *qh)
++{
++	uint32_t hub_addr, port_addr;
++
++	if(!fiq_split_enable)
++		return 0;
++
++	hcd->fops->hub_info(hcd, DWC_CIRCLEQ_FIRST(&qh->qtd_list)->urb->priv, &hub_addr, &port_addr);
++
++	if(hcd->hub_port[hub_addr] & (1 << port_addr))
++	{
++		fiq_print(FIQDBG_PORTHUB, "H%dP%d:S%02d", hub_addr, port_addr, qh->skip_count);
++
++		qh->skip_count++;
++
++		if(qh->skip_count > 40000)
++		{
++			printk_once(KERN_ERR "Error: Having to skip port allocation");
++			local_fiq_disable();
++			BUG();
++			return 0;
++		}
++		return 1;
++	}
++	else
++	{
++		qh->skip_count = 0;
++		hcd->hub_port[hub_addr] |= 1 << port_addr;
++		fiq_print(FIQDBG_PORTHUB, "H%dP%d:A %d", hub_addr, port_addr, DWC_CIRCLEQ_FIRST(&qh->qtd_list)->urb->pipe_info.ep_num);
++#ifdef FIQ_DEBUG
++		hcd->hub_port_alloc[hub_addr * 16 + port_addr] = dwc_otg_hcd_get_frame_number(hcd);
++#endif
++		return 0;
++	}
++}
++void dwc_otg_hcd_release_port(dwc_otg_hcd_t * hcd, dwc_otg_qh_t *qh)
++{
++	uint32_t hub_addr, port_addr;
++
++	if(!fiq_split_enable)
++		return;
++
++	hcd->fops->hub_info(hcd, DWC_CIRCLEQ_FIRST(&qh->qtd_list)->urb->priv, &hub_addr, &port_addr);
++
++	hcd->hub_port[hub_addr] &= ~(1 << port_addr);
++#ifdef FIQ_DEBUG
++	hcd->hub_port_alloc[hub_addr * 16 + port_addr] = -1;
++#endif
++	fiq_print(FIQDBG_PORTHUB, "H%dP%d:RO%d", hub_addr, port_addr, DWC_CIRCLEQ_FIRST(&qh->qtd_list)->urb->pipe_info.ep_num);
++
++}
++
++
++/**
++ * This function selects transactions from the HCD transfer schedule and
++ * assigns them to available host channels. It is called from HCD interrupt
++ * handler functions.
++ *
++ * @param hcd The HCD state structure.
++ *
++ * @return The types of new transactions that were assigned to host channels.
++ */
++dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t * hcd)
++{
++	dwc_list_link_t *qh_ptr;
++	dwc_otg_qh_t *qh;
++	dwc_otg_qtd_t *qtd;
++	int num_channels;
++	dwc_irqflags_t flags;
++	dwc_spinlock_t *channel_lock = hcd->channel_lock;
++	dwc_otg_transaction_type_e ret_val = DWC_OTG_TRANSACTION_NONE;
++
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCD, "  Select Transactions\n");
++#endif
++
++#ifdef DEBUG_HOST_CHANNELS
++	last_sel_trans_num_per_scheduled = 0;
++	last_sel_trans_num_nonper_scheduled = 0;
++	last_sel_trans_num_avail_hc_at_start = hcd->available_host_channels;
++#endif /* DEBUG_HOST_CHANNELS */
++
++	/* Process entries in the periodic ready list. */
++	qh_ptr = DWC_LIST_FIRST(&hcd->periodic_sched_ready);
++
++	while (qh_ptr != &hcd->periodic_sched_ready &&
++	       !DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) {
++
++		qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++
++		if(qh->do_split) {
++			qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list);
++			if(!(qh->ep_type == UE_ISOCHRONOUS &&
++					(qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID ||
++					qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END))) {
++				if(dwc_otg_hcd_allocate_port(hcd, qh))
++				{
++					qh_ptr = DWC_LIST_NEXT(qh_ptr);
++					g_next_sched_frame = dwc_frame_num_inc(dwc_otg_hcd_get_frame_number(hcd), 1);
++					continue;
++				}
++			}
++		}
++
++		if (microframe_schedule) {
++			// Make sure we leave one channel for non periodic transactions.
++			DWC_SPINLOCK_IRQSAVE(channel_lock, &flags);
++			if (hcd->available_host_channels <= 1) {
++				DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
++				if(qh->do_split) dwc_otg_hcd_release_port(hcd, qh);
++				break;
++			}
++			hcd->available_host_channels--;
++			DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
++#ifdef DEBUG_HOST_CHANNELS
++			last_sel_trans_num_per_scheduled++;
++#endif /* DEBUG_HOST_CHANNELS */
++		}
++		qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++		assign_and_init_hc(hcd, qh);
++
++		/*
++		 * Move the QH from the periodic ready schedule to the
++		 * periodic assigned schedule.
++		 */
++		qh_ptr = DWC_LIST_NEXT(qh_ptr);
++		DWC_SPINLOCK_IRQSAVE(channel_lock, &flags);
++		DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned,
++				   &qh->qh_list_entry);
++		DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
++	}
++
++	/*
++	 * Process entries in the inactive portion of the non-periodic
++	 * schedule. Some free host channels may not be used if they are
++	 * reserved for periodic transfers.
++	 */
++	qh_ptr = hcd->non_periodic_sched_inactive.next;
++	num_channels = hcd->core_if->core_params->host_channels;
++	while (qh_ptr != &hcd->non_periodic_sched_inactive &&
++	       (microframe_schedule || hcd->non_periodic_channels <
++		num_channels - hcd->periodic_channels) &&
++	       !DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) {
++
++		qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++
++		/*
++		 * Check to see if this is a NAK'd retransmit, in which case ignore for retransmission
++		 * we hold off on bulk retransmissions to reduce NAK interrupt overhead for full-speed
++		 * cheeky devices that just hold off using NAKs
++		 */
++		if (nak_holdoff_enable && qh->do_split) {
++			if (qh->nak_frame != 0xffff &&
++				dwc_full_frame_num(qh->nak_frame) ==
++				dwc_full_frame_num(dwc_otg_hcd_get_frame_number(hcd))) {
++				/*
++				 * Revisit: Need to avoid trampling on periodic scheduling.
++				 * Currently we are safe because g_np_count != g_np_sent whenever we hit this,
++				 * but if this behaviour is changed then periodic endpoints will get a slower
++				 * polling rate.
++				 */
++				g_next_sched_frame = ((qh->nak_frame + 8) & ~7) & DWC_HFNUM_MAX_FRNUM;
++				qh_ptr = DWC_LIST_NEXT(qh_ptr);
++				continue;
++			} else {
++				qh->nak_frame = 0xffff;
++			}
++		}
++
++		if (microframe_schedule) {
++				DWC_SPINLOCK_IRQSAVE(channel_lock, &flags);
++				if (hcd->available_host_channels < 1) {
++					DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
++					break;
++				}
++				hcd->available_host_channels--;
++				DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
++#ifdef DEBUG_HOST_CHANNELS
++				last_sel_trans_num_nonper_scheduled++;
++#endif /* DEBUG_HOST_CHANNELS */
++		}
++
++		assign_and_init_hc(hcd, qh);
++
++		/*
++		 * Move the QH from the non-periodic inactive schedule to the
++		 * non-periodic active schedule.
++		 */
++		qh_ptr = DWC_LIST_NEXT(qh_ptr);
++		DWC_SPINLOCK_IRQSAVE(channel_lock, &flags);
++		DWC_LIST_MOVE_HEAD(&hcd->non_periodic_sched_active,
++				   &qh->qh_list_entry);
++		DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
++
++		g_np_sent++;
++
++		if (!microframe_schedule)
++			hcd->non_periodic_channels++;
++	}
++
++	if(!DWC_LIST_EMPTY(&hcd->periodic_sched_assigned))
++		ret_val |= DWC_OTG_TRANSACTION_PERIODIC;
++
++	if(!DWC_LIST_EMPTY(&hcd->non_periodic_sched_active))
++		ret_val |= DWC_OTG_TRANSACTION_NON_PERIODIC;
++
++
++#ifdef DEBUG_HOST_CHANNELS
++	last_sel_trans_num_avail_hc_at_end = hcd->available_host_channels;
++#endif /* DEBUG_HOST_CHANNELS */
++	return ret_val;
++}
++
++/**
++ * Attempts to queue a single transaction request for a host channel
++ * associated with either a periodic or non-periodic transfer. This function
++ * assumes that there is space available in the appropriate request queue. For
++ * an OUT transfer or SETUP transaction in Slave mode, it checks whether space
++ * is available in the appropriate Tx FIFO.
++ *
++ * @param hcd The HCD state structure.
++ * @param hc Host channel descriptor associated with either a periodic or
++ * non-periodic transfer.
++ * @param fifo_dwords_avail Number of DWORDs available in the periodic Tx
++ * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic
++ * transfers.
++ *
++ * @return 1 if a request is queued and more requests may be needed to
++ * complete the transfer, 0 if no more requests are required for this
++ * transfer, -1 if there is insufficient space in the Tx FIFO.
++ */
++static int queue_transaction(dwc_otg_hcd_t * hcd,
++			     dwc_hc_t * hc, uint16_t fifo_dwords_avail)
++{
++	int retval;
++
++	if (hcd->core_if->dma_enable) {
++		if (hcd->core_if->dma_desc_enable) {
++			if (!hc->xfer_started
++			    || (hc->ep_type == DWC_OTG_EP_TYPE_ISOC)) {
++				dwc_otg_hcd_start_xfer_ddma(hcd, hc->qh);
++				hc->qh->ping_state = 0;
++			}
++		} else if (!hc->xfer_started) {
++			dwc_otg_hc_start_transfer(hcd->core_if, hc);
++			hc->qh->ping_state = 0;
++		}
++		retval = 0;
++	} else if (hc->halt_pending) {
++		/* Don't queue a request if the channel has been halted. */
++		retval = 0;
++	} else if (hc->halt_on_queue) {
++		dwc_otg_hc_halt(hcd->core_if, hc, hc->halt_status);
++		retval = 0;
++	} else if (hc->do_ping) {
++		if (!hc->xfer_started) {
++			dwc_otg_hc_start_transfer(hcd->core_if, hc);
++		}
++		retval = 0;
++	} else if (!hc->ep_is_in || hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
++		if ((fifo_dwords_avail * 4) >= hc->max_packet) {
++			if (!hc->xfer_started) {
++				dwc_otg_hc_start_transfer(hcd->core_if, hc);
++				retval = 1;
++			} else {
++				retval =
++				    dwc_otg_hc_continue_transfer(hcd->core_if,
++								 hc);
++			}
++		} else {
++			retval = -1;
++		}
++	} else {
++		if (!hc->xfer_started) {
++			dwc_otg_hc_start_transfer(hcd->core_if, hc);
++			retval = 1;
++		} else {
++			retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc);
++		}
++	}
++
++	return retval;
++}
++
++/**
++ * Processes periodic channels for the next frame and queues transactions for
++ * these channels to the DWC_otg controller. After queueing transactions, the
++ * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions
++ * to queue as Periodic Tx FIFO or request queue space becomes available.
++ * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled.
++ */
++static void process_periodic_channels(dwc_otg_hcd_t * hcd)
++{
++	hptxsts_data_t tx_status;
++	dwc_list_link_t *qh_ptr;
++	dwc_otg_qh_t *qh;
++	int status;
++	int no_queue_space = 0;
++	int no_fifo_space = 0;
++
++	dwc_otg_host_global_regs_t *host_regs;
++	host_regs = hcd->core_if->host_if->host_global_regs;
++
++	DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n");
++#ifdef DEBUG
++	tx_status.d32 = DWC_READ_REG32(&host_regs->hptxsts);
++	DWC_DEBUGPL(DBG_HCDV,
++		    "  P Tx Req Queue Space Avail (before queue): %d\n",
++		    tx_status.b.ptxqspcavail);
++	DWC_DEBUGPL(DBG_HCDV, "  P Tx FIFO Space Avail (before queue): %d\n",
++		    tx_status.b.ptxfspcavail);
++#endif
++
++	qh_ptr = hcd->periodic_sched_assigned.next;
++	while (qh_ptr != &hcd->periodic_sched_assigned) {
++		tx_status.d32 = DWC_READ_REG32(&host_regs->hptxsts);
++		if (tx_status.b.ptxqspcavail == 0) {
++			no_queue_space = 1;
++			break;
++		}
++
++		qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++
++		// Do not send a split start transaction any later than frame .6
++		// Note, we have to schedule a periodic in .5 to make it go in .6
++		if(fiq_split_enable && qh->do_split && ((dwc_otg_hcd_get_frame_number(hcd) + 1) & 7) > 6)
++		{
++			qh_ptr = qh_ptr->next;
++			g_next_sched_frame = dwc_otg_hcd_get_frame_number(hcd) | 7;
++			continue;
++		}
++
++		/*
++		 * Set a flag if we're queuing high-bandwidth in slave mode.
++		 * The flag prevents any halts to get into the request queue in
++		 * the middle of multiple high-bandwidth packets getting queued.
++		 */
++		if (!hcd->core_if->dma_enable && qh->channel->multi_count > 1) {
++			hcd->core_if->queuing_high_bandwidth = 1;
++		}
++		status =
++		    queue_transaction(hcd, qh->channel,
++				      tx_status.b.ptxfspcavail);
++		if (status < 0) {
++			no_fifo_space = 1;
++			break;
++		}
++
++		/*
++		 * In Slave mode, stay on the current transfer until there is
++		 * nothing more to do or the high-bandwidth request count is
++		 * reached. In DMA mode, only need to queue one request. The
++		 * controller automatically handles multiple packets for
++		 * high-bandwidth transfers.
++		 */
++		if (hcd->core_if->dma_enable || status == 0 ||
++		    qh->channel->requests == qh->channel->multi_count) {
++			qh_ptr = qh_ptr->next;
++			/*
++			 * Move the QH from the periodic assigned schedule to
++			 * the periodic queued schedule.
++			 */
++			DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_queued,
++					   &qh->qh_list_entry);
++
++			/* done queuing high bandwidth */
++			hcd->core_if->queuing_high_bandwidth = 0;
++		}
++	}
++
++	if (!hcd->core_if->dma_enable) {
++		dwc_otg_core_global_regs_t *global_regs;
++		gintmsk_data_t intr_mask = {.d32 = 0 };
++
++		global_regs = hcd->core_if->core_global_regs;
++		intr_mask.b.ptxfempty = 1;
++#ifdef DEBUG
++		tx_status.d32 = DWC_READ_REG32(&host_regs->hptxsts);
++		DWC_DEBUGPL(DBG_HCDV,
++			    "  P Tx Req Queue Space Avail (after queue): %d\n",
++			    tx_status.b.ptxqspcavail);
++		DWC_DEBUGPL(DBG_HCDV,
++			    "  P Tx FIFO Space Avail (after queue): %d\n",
++			    tx_status.b.ptxfspcavail);
++#endif
++		if (!DWC_LIST_EMPTY(&hcd->periodic_sched_assigned) ||
++		    no_queue_space || no_fifo_space) {
++			/*
++			 * May need to queue more transactions as the request
++			 * queue or Tx FIFO empties. Enable the periodic Tx
++			 * FIFO empty interrupt. (Always use the half-empty
++			 * level to ensure that new requests are loaded as
++			 * soon as possible.)
++			 */
++			DWC_MODIFY_REG32(&global_regs->gintmsk, 0,
++					 intr_mask.d32);
++		} else {
++			/*
++			 * Disable the Tx FIFO empty interrupt since there are
++			 * no more transactions that need to be queued right
++			 * now. This function is called from interrupt
++			 * handlers to queue more transactions as transfer
++			 * states change.
++			 */
++			DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32,
++					 0);
++		}
++	}
++}
++
++/**
++ * Processes active non-periodic channels and queues transactions for these
++ * channels to the DWC_otg controller. After queueing transactions, the NP Tx
++ * FIFO Empty interrupt is enabled if there are more transactions to queue as
++ * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx
++ * FIFO Empty interrupt is disabled.
++ */
++static void process_non_periodic_channels(dwc_otg_hcd_t * hcd)
++{
++	gnptxsts_data_t tx_status;
++	dwc_list_link_t *orig_qh_ptr;
++	dwc_otg_qh_t *qh;
++	int status;
++	int no_queue_space = 0;
++	int no_fifo_space = 0;
++	int more_to_do = 0;
++
++	dwc_otg_core_global_regs_t *global_regs =
++	    hcd->core_if->core_global_regs;
++
++	DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n");
++#ifdef DEBUG
++	tx_status.d32 = DWC_READ_REG32(&global_regs->gnptxsts);
++	DWC_DEBUGPL(DBG_HCDV,
++		    "  NP Tx Req Queue Space Avail (before queue): %d\n",
++		    tx_status.b.nptxqspcavail);
++	DWC_DEBUGPL(DBG_HCDV, "  NP Tx FIFO Space Avail (before queue): %d\n",
++		    tx_status.b.nptxfspcavail);
++#endif
++	/*
++	 * Keep track of the starting point. Skip over the start-of-list
++	 * entry.
++	 */
++	if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) {
++		hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
++	}
++	orig_qh_ptr = hcd->non_periodic_qh_ptr;
++
++	/*
++	 * Process once through the active list or until no more space is
++	 * available in the request queue or the Tx FIFO.
++	 */
++	do {
++		tx_status.d32 = DWC_READ_REG32(&global_regs->gnptxsts);
++		if (!hcd->core_if->dma_enable && tx_status.b.nptxqspcavail == 0) {
++			no_queue_space = 1;
++			break;
++		}
++
++		qh = DWC_LIST_ENTRY(hcd->non_periodic_qh_ptr, dwc_otg_qh_t,
++				    qh_list_entry);
++
++		// Do not send a split start transaction any later than frame .5
++		// non periodic transactions will start immediately in this uframe
++		if(fiq_split_enable && qh->do_split && ((dwc_otg_hcd_get_frame_number(hcd) + 1) & 7) > 6)
++		{
++			g_next_sched_frame = dwc_otg_hcd_get_frame_number(hcd) | 7;
++			break;
++		}
++
++		status =
++		    queue_transaction(hcd, qh->channel,
++				      tx_status.b.nptxfspcavail);
++
++		if (status > 0) {
++			more_to_do = 1;
++		} else if (status < 0) {
++			no_fifo_space = 1;
++			break;
++		}
++
++		/* Advance to next QH, skipping start-of-list entry. */
++		hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
++		if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) {
++			hcd->non_periodic_qh_ptr =
++			    hcd->non_periodic_qh_ptr->next;
++		}
++
++	} while (hcd->non_periodic_qh_ptr != orig_qh_ptr);
++
++	if (!hcd->core_if->dma_enable) {
++		gintmsk_data_t intr_mask = {.d32 = 0 };
++		intr_mask.b.nptxfempty = 1;
++
++#ifdef DEBUG
++		tx_status.d32 = DWC_READ_REG32(&global_regs->gnptxsts);
++		DWC_DEBUGPL(DBG_HCDV,
++			    "  NP Tx Req Queue Space Avail (after queue): %d\n",
++			    tx_status.b.nptxqspcavail);
++		DWC_DEBUGPL(DBG_HCDV,
++			    "  NP Tx FIFO Space Avail (after queue): %d\n",
++			    tx_status.b.nptxfspcavail);
++#endif
++		if (more_to_do || no_queue_space || no_fifo_space) {
++			/*
++			 * May need to queue more transactions as the request
++			 * queue or Tx FIFO empties. Enable the non-periodic
++			 * Tx FIFO empty interrupt. (Always use the half-empty
++			 * level to ensure that new requests are loaded as
++			 * soon as possible.)
++			 */
++			DWC_MODIFY_REG32(&global_regs->gintmsk, 0,
++					 intr_mask.d32);
++		} else {
++			/*
++			 * Disable the Tx FIFO empty interrupt since there are
++			 * no more transactions that need to be queued right
++			 * now. This function is called from interrupt
++			 * handlers to queue more transactions as transfer
++			 * states change.
++			 */
++			DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32,
++					 0);
++		}
++	}
++}
++
++/**
++ * This function processes the currently active host channels and queues
++ * transactions for these channels to the DWC_otg controller. It is called
++ * from HCD interrupt handler functions.
++ *
++ * @param hcd The HCD state structure.
++ * @param tr_type The type(s) of transactions to queue (non-periodic,
++ * periodic, or both).
++ */
++void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t * hcd,
++				    dwc_otg_transaction_type_e tr_type)
++{
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n");
++#endif
++	/* Process host channels associated with periodic transfers. */
++	if ((tr_type == DWC_OTG_TRANSACTION_PERIODIC ||
++	     tr_type == DWC_OTG_TRANSACTION_ALL) &&
++	    !DWC_LIST_EMPTY(&hcd->periodic_sched_assigned)) {
++
++		process_periodic_channels(hcd);
++	}
++
++	/* Process host channels associated with non-periodic transfers. */
++	if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC ||
++	    tr_type == DWC_OTG_TRANSACTION_ALL) {
++		if (!DWC_LIST_EMPTY(&hcd->non_periodic_sched_active)) {
++			process_non_periodic_channels(hcd);
++		} else {
++			/*
++			 * Ensure NP Tx FIFO empty interrupt is disabled when
++			 * there are no non-periodic transfers to process.
++			 */
++			gintmsk_data_t gintmsk = {.d32 = 0 };
++			gintmsk.b.nptxfempty = 1;
++			DWC_MODIFY_REG32(&hcd->core_if->
++					 core_global_regs->gintmsk, gintmsk.d32,
++					 0);
++		}
++	}
++}
++
++#ifdef DWC_HS_ELECT_TST
++/*
++ * Quick and dirty hack to implement the HS Electrical Test
++ * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature.
++ *
++ * This code was copied from our userspace app "hset". It sends a
++ * Get Device Descriptor control sequence in two parts, first the
++ * Setup packet by itself, followed some time later by the In and
++ * Ack packets. Rather than trying to figure out how to add this
++ * functionality to the normal driver code, we just hijack the
++ * hardware, using these two function to drive the hardware
++ * directly.
++ */
++
++static dwc_otg_core_global_regs_t *global_regs;
++static dwc_otg_host_global_regs_t *hc_global_regs;
++static dwc_otg_hc_regs_t *hc_regs;
++static uint32_t *data_fifo;
++
++static void do_setup(void)
++{
++	gintsts_data_t gintsts;
++	hctsiz_data_t hctsiz;
++	hcchar_data_t hcchar;
++	haint_data_t haint;
++	hcint_data_t hcint;
++
++	/* Enable HAINTs */
++	DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0001);
++
++	/* Enable HCINTs */
++	DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x04a3);
++
++	/* Read GINTSTS */
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/* Read HAINT */
++	haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
++
++	/* Read HCINT */
++	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++
++	/* Read HCCHAR */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++	/* Clear HCINT */
++	DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/*
++	 * Send Setup packet (Get Device Descriptor)
++	 */
++
++	/* Make sure channel is disabled */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	if (hcchar.b.chen) {
++		hcchar.b.chdis = 1;
++//              hcchar.b.chen = 1;
++		DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++		//sleep(1);
++		dwc_mdelay(1000);
++
++		/* Read GINTSTS */
++		gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++		/* Read HAINT */
++		haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
++
++		/* Read HCINT */
++		hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++
++		/* Read HCCHAR */
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++		/* Clear HCINT */
++		DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
++
++		/* Clear HAINT */
++		DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
++
++		/* Clear GINTSTS */
++		DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	}
++
++	/* Set HCTSIZ */
++	hctsiz.d32 = 0;
++	hctsiz.b.xfersize = 8;
++	hctsiz.b.pktcnt = 1;
++	hctsiz.b.pid = DWC_OTG_HC_PID_SETUP;
++	DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32);
++
++	/* Set HCCHAR */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++	hcchar.b.epdir = 0;
++	hcchar.b.epnum = 0;
++	hcchar.b.mps = 8;
++	hcchar.b.chen = 1;
++	DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++
++	/* Fill FIFO with Setup data for Get Device Descriptor */
++	data_fifo = (uint32_t *) ((char *)global_regs + 0x1000);
++	DWC_WRITE_REG32(data_fifo++, 0x01000680);
++	DWC_WRITE_REG32(data_fifo++, 0x00080000);
++
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/* Wait for host channel interrupt */
++	do {
++		gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++	} while (gintsts.b.hcintr == 0);
++
++	/* Disable HCINTs */
++	DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x0000);
++
++	/* Disable HAINTs */
++	DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0000);
++
++	/* Read HAINT */
++	haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
++
++	/* Read HCINT */
++	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++
++	/* Read HCCHAR */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++	/* Clear HCINT */
++	DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++}
++
++static void do_in_ack(void)
++{
++	gintsts_data_t gintsts;
++	hctsiz_data_t hctsiz;
++	hcchar_data_t hcchar;
++	haint_data_t haint;
++	hcint_data_t hcint;
++	host_grxsts_data_t grxsts;
++
++	/* Enable HAINTs */
++	DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0001);
++
++	/* Enable HCINTs */
++	DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x04a3);
++
++	/* Read GINTSTS */
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/* Read HAINT */
++	haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
++
++	/* Read HCINT */
++	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++
++	/* Read HCCHAR */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++	/* Clear HCINT */
++	DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/*
++	 * Receive Control In packet
++	 */
++
++	/* Make sure channel is disabled */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	if (hcchar.b.chen) {
++		hcchar.b.chdis = 1;
++		hcchar.b.chen = 1;
++		DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++		//sleep(1);
++		dwc_mdelay(1000);
++
++		/* Read GINTSTS */
++		gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++		/* Read HAINT */
++		haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
++
++		/* Read HCINT */
++		hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++
++		/* Read HCCHAR */
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++		/* Clear HCINT */
++		DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
++
++		/* Clear HAINT */
++		DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
++
++		/* Clear GINTSTS */
++		DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	}
++
++	/* Set HCTSIZ */
++	hctsiz.d32 = 0;
++	hctsiz.b.xfersize = 8;
++	hctsiz.b.pktcnt = 1;
++	hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
++	DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32);
++
++	/* Set HCCHAR */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++	hcchar.b.epdir = 1;
++	hcchar.b.epnum = 0;
++	hcchar.b.mps = 8;
++	hcchar.b.chen = 1;
++	DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/* Wait for receive status queue interrupt */
++	do {
++		gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++	} while (gintsts.b.rxstsqlvl == 0);
++
++	/* Read RXSTS */
++	grxsts.d32 = DWC_READ_REG32(&global_regs->grxstsp);
++
++	/* Clear RXSTSQLVL in GINTSTS */
++	gintsts.d32 = 0;
++	gintsts.b.rxstsqlvl = 1;
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	switch (grxsts.b.pktsts) {
++	case DWC_GRXSTS_PKTSTS_IN:
++		/* Read the data into the host buffer */
++		if (grxsts.b.bcnt > 0) {
++			int i;
++			int word_count = (grxsts.b.bcnt + 3) / 4;
++
++			data_fifo = (uint32_t *) ((char *)global_regs + 0x1000);
++
++			for (i = 0; i < word_count; i++) {
++				(void)DWC_READ_REG32(data_fifo++);
++			}
++		}
++		break;
++
++	default:
++		break;
++	}
++
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/* Wait for receive status queue interrupt */
++	do {
++		gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++	} while (gintsts.b.rxstsqlvl == 0);
++
++	/* Read RXSTS */
++	grxsts.d32 = DWC_READ_REG32(&global_regs->grxstsp);
++
++	/* Clear RXSTSQLVL in GINTSTS */
++	gintsts.d32 = 0;
++	gintsts.b.rxstsqlvl = 1;
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	switch (grxsts.b.pktsts) {
++	case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
++		break;
++
++	default:
++		break;
++	}
++
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/* Wait for host channel interrupt */
++	do {
++		gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++	} while (gintsts.b.hcintr == 0);
++
++	/* Read HAINT */
++	haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
++
++	/* Read HCINT */
++	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++
++	/* Read HCCHAR */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++	/* Clear HCINT */
++	DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++//      usleep(100000);
++//      mdelay(100);
++	dwc_mdelay(1);
++
++	/*
++	 * Send handshake packet
++	 */
++
++	/* Read HAINT */
++	haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
++
++	/* Read HCINT */
++	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++
++	/* Read HCCHAR */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++	/* Clear HCINT */
++	DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/* Make sure channel is disabled */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	if (hcchar.b.chen) {
++		hcchar.b.chdis = 1;
++		hcchar.b.chen = 1;
++		DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++		//sleep(1);
++		dwc_mdelay(1000);
++
++		/* Read GINTSTS */
++		gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++		/* Read HAINT */
++		haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
++
++		/* Read HCINT */
++		hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++
++		/* Read HCCHAR */
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++		/* Clear HCINT */
++		DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
++
++		/* Clear HAINT */
++		DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
++
++		/* Clear GINTSTS */
++		DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	}
++
++	/* Set HCTSIZ */
++	hctsiz.d32 = 0;
++	hctsiz.b.xfersize = 0;
++	hctsiz.b.pktcnt = 1;
++	hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
++	DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32);
++
++	/* Set HCCHAR */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++	hcchar.b.epdir = 0;
++	hcchar.b.epnum = 0;
++	hcchar.b.mps = 8;
++	hcchar.b.chen = 1;
++	DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/* Wait for host channel interrupt */
++	do {
++		gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++	} while (gintsts.b.hcintr == 0);
++
++	/* Disable HCINTs */
++	DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x0000);
++
++	/* Disable HAINTs */
++	DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0000);
++
++	/* Read HAINT */
++	haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
++
++	/* Read HCINT */
++	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++
++	/* Read HCCHAR */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++	/* Clear HCINT */
++	DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++}
++#endif
++
++/** Handles hub class-specific requests. */
++int dwc_otg_hcd_hub_control(dwc_otg_hcd_t * dwc_otg_hcd,
++			    uint16_t typeReq,
++			    uint16_t wValue,
++			    uint16_t wIndex, uint8_t * buf, uint16_t wLength)
++{
++	int retval = 0;
++
++	dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
++	usb_hub_descriptor_t *hub_desc;
++	hprt0_data_t hprt0 = {.d32 = 0 };
++
++	uint32_t port_status;
++
++	switch (typeReq) {
++	case UCR_CLEAR_HUB_FEATURE:
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++			    "ClearHubFeature 0x%x\n", wValue);
++		switch (wValue) {
++		case UHF_C_HUB_LOCAL_POWER:
++		case UHF_C_HUB_OVER_CURRENT:
++			/* Nothing required here */
++			break;
++		default:
++			retval = -DWC_E_INVALID;
++			DWC_ERROR("DWC OTG HCD - "
++				  "ClearHubFeature request %xh unknown\n",
++				  wValue);
++		}
++		break;
++	case UCR_CLEAR_PORT_FEATURE:
++#ifdef CONFIG_USB_DWC_OTG_LPM
++		if (wValue != UHF_PORT_L1)
++#endif
++			if (!wIndex || wIndex > 1)
++				goto error;
++
++		switch (wValue) {
++		case UHF_PORT_ENABLE:
++			DWC_DEBUGPL(DBG_ANY, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_ENABLE\n");
++			hprt0.d32 = dwc_otg_read_hprt0(core_if);
++			hprt0.b.prtena = 1;
++			DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++			break;
++		case UHF_PORT_SUSPEND:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
++
++			if (core_if->power_down == 2) {
++				dwc_otg_host_hibernation_restore(core_if, 0, 0);
++			} else {
++				DWC_WRITE_REG32(core_if->pcgcctl, 0);
++				dwc_mdelay(5);
++
++				hprt0.d32 = dwc_otg_read_hprt0(core_if);
++				hprt0.b.prtres = 1;
++				DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++				hprt0.b.prtsusp = 0;
++				/* Clear Resume bit */
++				dwc_mdelay(100);
++				hprt0.b.prtres = 0;
++				DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++			}
++			break;
++#ifdef CONFIG_USB_DWC_OTG_LPM
++		case UHF_PORT_L1:
++			{
++				pcgcctl_data_t pcgcctl = {.d32 = 0 };
++				glpmcfg_data_t lpmcfg = {.d32 = 0 };
++
++				lpmcfg.d32 =
++				    DWC_READ_REG32(&core_if->
++						   core_global_regs->glpmcfg);
++				lpmcfg.b.en_utmi_sleep = 0;
++				lpmcfg.b.hird_thres &= (~(1 << 4));
++				lpmcfg.b.prt_sleep_sts = 1;
++				DWC_WRITE_REG32(&core_if->
++						core_global_regs->glpmcfg,
++						lpmcfg.d32);
++
++				/* Clear Enbl_L1Gating bit. */
++				pcgcctl.b.enbl_sleep_gating = 1;
++				DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32,
++						 0);
++
++				dwc_mdelay(5);
++
++				hprt0.d32 = dwc_otg_read_hprt0(core_if);
++				hprt0.b.prtres = 1;
++				DWC_WRITE_REG32(core_if->host_if->hprt0,
++						hprt0.d32);
++				/* This bit will be cleared in wakeup interrupt handle */
++				break;
++			}
++#endif
++		case UHF_PORT_POWER:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_POWER\n");
++			hprt0.d32 = dwc_otg_read_hprt0(core_if);
++			hprt0.b.prtpwr = 0;
++			DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++			break;
++		case UHF_PORT_INDICATOR:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_INDICATOR\n");
++			/* Port inidicator not supported */
++			break;
++		case UHF_C_PORT_CONNECTION:
++			/* Clears drivers internal connect status change
++			 * flag */
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n");
++			dwc_otg_hcd->flags.b.port_connect_status_change = 0;
++			break;
++		case UHF_C_PORT_RESET:
++			/* Clears the driver's internal Port Reset Change
++			 * flag */
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_C_RESET\n");
++			dwc_otg_hcd->flags.b.port_reset_change = 0;
++			break;
++		case UHF_C_PORT_ENABLE:
++			/* Clears the driver's internal Port
++			 * Enable/Disable Change flag */
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n");
++			dwc_otg_hcd->flags.b.port_enable_change = 0;
++			break;
++		case UHF_C_PORT_SUSPEND:
++			/* Clears the driver's internal Port Suspend
++			 * Change flag, which is set when resume signaling on
++			 * the host port is complete */
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n");
++			dwc_otg_hcd->flags.b.port_suspend_change = 0;
++			break;
++#ifdef CONFIG_USB_DWC_OTG_LPM
++		case UHF_C_PORT_L1:
++			dwc_otg_hcd->flags.b.port_l1_change = 0;
++			break;
++#endif
++		case UHF_C_PORT_OVER_CURRENT:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n");
++			dwc_otg_hcd->flags.b.port_over_current_change = 0;
++			break;
++		default:
++			retval = -DWC_E_INVALID;
++			DWC_ERROR("DWC OTG HCD - "
++				  "ClearPortFeature request %xh "
++				  "unknown or unsupported\n", wValue);
++		}
++		break;
++	case UCR_GET_HUB_DESCRIPTOR:
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++			    "GetHubDescriptor\n");
++		hub_desc = (usb_hub_descriptor_t *) buf;
++		hub_desc->bDescLength = 9;
++		hub_desc->bDescriptorType = 0x29;
++		hub_desc->bNbrPorts = 1;
++		USETW(hub_desc->wHubCharacteristics, 0x08);
++		hub_desc->bPwrOn2PwrGood = 1;
++		hub_desc->bHubContrCurrent = 0;
++		hub_desc->DeviceRemovable[0] = 0;
++		hub_desc->DeviceRemovable[1] = 0xff;
++		break;
++	case UCR_GET_HUB_STATUS:
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++			    "GetHubStatus\n");
++		DWC_MEMSET(buf, 0, 4);
++		break;
++	case UCR_GET_PORT_STATUS:
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++			    "GetPortStatus wIndex = 0x%04x FLAGS=0x%08x\n",
++			    wIndex, dwc_otg_hcd->flags.d32);
++		if (!wIndex || wIndex > 1)
++			goto error;
++
++		port_status = 0;
++
++		if (dwc_otg_hcd->flags.b.port_connect_status_change)
++			port_status |= (1 << UHF_C_PORT_CONNECTION);
++
++		if (dwc_otg_hcd->flags.b.port_enable_change)
++			port_status |= (1 << UHF_C_PORT_ENABLE);
++
++		if (dwc_otg_hcd->flags.b.port_suspend_change)
++			port_status |= (1 << UHF_C_PORT_SUSPEND);
++
++		if (dwc_otg_hcd->flags.b.port_l1_change)
++			port_status |= (1 << UHF_C_PORT_L1);
++
++		if (dwc_otg_hcd->flags.b.port_reset_change) {
++			port_status |= (1 << UHF_C_PORT_RESET);
++		}
++
++		if (dwc_otg_hcd->flags.b.port_over_current_change) {
++			DWC_WARN("Overcurrent change detected\n");
++			port_status |= (1 << UHF_C_PORT_OVER_CURRENT);
++		}
++
++		if (!dwc_otg_hcd->flags.b.port_connect_status) {
++			/*
++			 * The port is disconnected, which means the core is
++			 * either in device mode or it soon will be. Just
++			 * return 0's for the remainder of the port status
++			 * since the port register can't be read if the core
++			 * is in device mode.
++			 */
++			*((__le32 *) buf) = dwc_cpu_to_le32(&port_status);
++			break;
++		}
++
++		hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0);
++		DWC_DEBUGPL(DBG_HCDV, "  HPRT0: 0x%08x\n", hprt0.d32);
++
++		if (hprt0.b.prtconnsts)
++			port_status |= (1 << UHF_PORT_CONNECTION);
++
++		if (hprt0.b.prtena)
++			port_status |= (1 << UHF_PORT_ENABLE);
++
++		if (hprt0.b.prtsusp)
++			port_status |= (1 << UHF_PORT_SUSPEND);
++
++		if (hprt0.b.prtovrcurract)
++			port_status |= (1 << UHF_PORT_OVER_CURRENT);
++
++		if (hprt0.b.prtrst)
++			port_status |= (1 << UHF_PORT_RESET);
++
++		if (hprt0.b.prtpwr)
++			port_status |= (1 << UHF_PORT_POWER);
++
++		if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED)
++			port_status |= (1 << UHF_PORT_HIGH_SPEED);
++		else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED)
++			port_status |= (1 << UHF_PORT_LOW_SPEED);
++
++		if (hprt0.b.prttstctl)
++			port_status |= (1 << UHF_PORT_TEST);
++		if (dwc_otg_get_lpm_portsleepstatus(dwc_otg_hcd->core_if)) {
++			port_status |= (1 << UHF_PORT_L1);
++		}
++		/*
++		   For Synopsys HW emulation of Power down wkup_control asserts the
++		   hreset_n and prst_n on suspned. This causes the HPRT0 to be zero.
++		   We intentionally tell the software that port is in L2Suspend state.
++		   Only for STE.
++		*/
++		if ((core_if->power_down == 2)
++		    && (core_if->hibernation_suspend == 1)) {
++			port_status |= (1 << UHF_PORT_SUSPEND);
++		}
++		/* USB_PORT_FEAT_INDICATOR unsupported always 0 */
++
++		*((__le32 *) buf) = dwc_cpu_to_le32(&port_status);
++
++		break;
++	case UCR_SET_HUB_FEATURE:
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++			    "SetHubFeature\n");
++		/* No HUB features supported */
++		break;
++	case UCR_SET_PORT_FEATURE:
++		if (wValue != UHF_PORT_TEST && (!wIndex || wIndex > 1))
++			goto error;
++
++		if (!dwc_otg_hcd->flags.b.port_connect_status) {
++			/*
++			 * The port is disconnected, which means the core is
++			 * either in device mode or it soon will be. Just
++			 * return without doing anything since the port
++			 * register can't be written if the core is in device
++			 * mode.
++			 */
++			break;
++		}
++
++		switch (wValue) {
++		case UHF_PORT_SUSPEND:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "SetPortFeature - USB_PORT_FEAT_SUSPEND\n");
++			if (dwc_otg_hcd_otg_port(dwc_otg_hcd) != wIndex) {
++				goto error;
++			}
++			if (core_if->power_down == 2) {
++				int timeout = 300;
++				dwc_irqflags_t flags;
++				pcgcctl_data_t pcgcctl = {.d32 = 0 };
++				gpwrdn_data_t gpwrdn = {.d32 = 0 };
++				gusbcfg_data_t gusbcfg = {.d32 = 0 };
++#ifdef DWC_DEV_SRPCAP
++				int32_t otg_cap_param = core_if->core_params->otg_cap;
++#endif
++				DWC_PRINTF("Preparing for complete power-off\n");
++
++				/* Save registers before hibernation */
++				dwc_otg_save_global_regs(core_if);
++				dwc_otg_save_host_regs(core_if);
++
++				hprt0.d32 = dwc_otg_read_hprt0(core_if);
++				hprt0.b.prtsusp = 1;
++				hprt0.b.prtena = 0;
++				DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++				/* Spin hprt0.b.prtsusp to became 1 */
++				do {
++					hprt0.d32 = dwc_otg_read_hprt0(core_if);
++					if (hprt0.b.prtsusp) {
++						break;
++					}
++					dwc_mdelay(1);
++				} while (--timeout);
++				if (!timeout) {
++					DWC_WARN("Suspend wasn't genereted\n");
++				}
++				dwc_udelay(10);
++
++				/*
++				 * We need to disable interrupts to prevent servicing of any IRQ
++				 * during going to hibernation
++				 */
++				DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags);
++				core_if->lx_state = DWC_OTG_L2;
++#ifdef DWC_DEV_SRPCAP
++				hprt0.d32 = dwc_otg_read_hprt0(core_if);
++				hprt0.b.prtpwr = 0;
++				hprt0.b.prtena = 0;
++				DWC_WRITE_REG32(core_if->host_if->hprt0,
++						hprt0.d32);
++#endif
++				gusbcfg.d32 =
++				    DWC_READ_REG32(&core_if->core_global_regs->
++						   gusbcfg);
++				if (gusbcfg.b.ulpi_utmi_sel == 1) {
++					/* ULPI interface */
++					/* Suspend the Phy Clock */
++					pcgcctl.d32 = 0;
++					pcgcctl.b.stoppclk = 1;
++					DWC_MODIFY_REG32(core_if->pcgcctl, 0,
++							 pcgcctl.d32);
++					dwc_udelay(10);
++					gpwrdn.b.pmuactv = 1;
++					DWC_MODIFY_REG32(&core_if->
++							 core_global_regs->
++							 gpwrdn, 0, gpwrdn.d32);
++				} else {
++					/* UTMI+ Interface */
++					gpwrdn.b.pmuactv = 1;
++					DWC_MODIFY_REG32(&core_if->
++							 core_global_regs->
++							 gpwrdn, 0, gpwrdn.d32);
++					dwc_udelay(10);
++					pcgcctl.b.stoppclk = 1;
++					DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32);
++					dwc_udelay(10);
++				}
++#ifdef DWC_DEV_SRPCAP
++				gpwrdn.d32 = 0;
++				gpwrdn.b.dis_vbus = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++#endif
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pmuintsel = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++				dwc_udelay(10);
++
++				gpwrdn.d32 = 0;
++#ifdef DWC_DEV_SRPCAP
++				gpwrdn.b.srp_det_msk = 1;
++#endif
++				gpwrdn.b.disconn_det_msk = 1;
++				gpwrdn.b.lnstchng_msk = 1;
++				gpwrdn.b.sts_chngint_msk = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++				dwc_udelay(10);
++
++				/* Enable Power Down Clamp and all interrupts in GPWRDN */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pwrdnclmp = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++				dwc_udelay(10);
++
++				/* Switch off VDD */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pwrdnswtch = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++
++#ifdef DWC_DEV_SRPCAP
++				if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE)
++				{
++					core_if->pwron_timer_started = 1;
++					DWC_TIMER_SCHEDULE(core_if->pwron_timer, 6000 /* 6 secs */ );
++				}
++#endif
++				/* Save gpwrdn register for further usage if stschng interrupt */
++				core_if->gr_backup->gpwrdn_local =
++						DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++
++				/* Set flag to indicate that we are in hibernation */
++				core_if->hibernation_suspend = 1;
++				DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock,flags);
++
++				DWC_PRINTF("Host hibernation completed\n");
++				// Exit from case statement
++				break;
++
++			}
++			if (dwc_otg_hcd_otg_port(dwc_otg_hcd) == wIndex &&
++			    dwc_otg_hcd->fops->get_b_hnp_enable(dwc_otg_hcd)) {
++				gotgctl_data_t gotgctl = {.d32 = 0 };
++				gotgctl.b.hstsethnpen = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gotgctl, 0, gotgctl.d32);
++				core_if->op_state = A_SUSPEND;
++			}
++			hprt0.d32 = dwc_otg_read_hprt0(core_if);
++			hprt0.b.prtsusp = 1;
++			DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++			{
++				dwc_irqflags_t flags;
++				/* Update lx_state */
++				DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags);
++				core_if->lx_state = DWC_OTG_L2;
++				DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags);
++			}
++			/* Suspend the Phy Clock */
++			{
++				pcgcctl_data_t pcgcctl = {.d32 = 0 };
++				pcgcctl.b.stoppclk = 1;
++				DWC_MODIFY_REG32(core_if->pcgcctl, 0,
++						 pcgcctl.d32);
++				dwc_udelay(10);
++			}
++
++			/* For HNP the bus must be suspended for at least 200ms. */
++			if (dwc_otg_hcd->fops->get_b_hnp_enable(dwc_otg_hcd)) {
++				pcgcctl_data_t pcgcctl = {.d32 = 0 };
++				pcgcctl.b.stoppclk = 1;
++                DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
++				dwc_mdelay(200);
++			}
++
++			/** @todo - check how sw can wait for 1 sec to check asesvld??? */
++#if 0 //vahrama !!!!!!!!!!!!!!!!!!
++			if (core_if->adp_enable) {
++				gotgctl_data_t gotgctl = {.d32 = 0 };
++				gpwrdn_data_t gpwrdn;
++
++				while (gotgctl.b.asesvld == 1) {
++					gotgctl.d32 =
++					    DWC_READ_REG32(&core_if->
++							   core_global_regs->
++							   gotgctl);
++					dwc_mdelay(100);
++				}
++
++				/* Enable Power Down Logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pmuactv = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++
++				/* Unmask SRP detected interrupt from Power Down Logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.srp_det_msk = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++
++				dwc_otg_adp_probe_start(core_if);
++			}
++#endif
++			break;
++		case UHF_PORT_POWER:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "SetPortFeature - USB_PORT_FEAT_POWER\n");
++			hprt0.d32 = dwc_otg_read_hprt0(core_if);
++			hprt0.b.prtpwr = 1;
++			DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++			break;
++		case UHF_PORT_RESET:
++			if ((core_if->power_down == 2)
++			    && (core_if->hibernation_suspend == 1)) {
++				/* If we are going to exit from Hibernated
++				 * state via USB RESET.
++				 */
++				dwc_otg_host_hibernation_restore(core_if, 0, 1);
++			} else {
++				hprt0.d32 = dwc_otg_read_hprt0(core_if);
++
++				DWC_DEBUGPL(DBG_HCD,
++					    "DWC OTG HCD HUB CONTROL - "
++					    "SetPortFeature - USB_PORT_FEAT_RESET\n");
++				{
++					pcgcctl_data_t pcgcctl = {.d32 = 0 };
++					pcgcctl.b.enbl_sleep_gating = 1;
++					pcgcctl.b.stoppclk = 1;
++					DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
++					DWC_WRITE_REG32(core_if->pcgcctl, 0);
++				}
++#ifdef CONFIG_USB_DWC_OTG_LPM
++				{
++					glpmcfg_data_t lpmcfg;
++					lpmcfg.d32 =
++						DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++					if (lpmcfg.b.prt_sleep_sts) {
++						lpmcfg.b.en_utmi_sleep = 0;
++						lpmcfg.b.hird_thres &= (~(1 << 4));
++						DWC_WRITE_REG32
++						    (&core_if->core_global_regs->glpmcfg,
++						     lpmcfg.d32);
++						dwc_mdelay(1);
++					}
++				}
++#endif
++				hprt0.d32 = dwc_otg_read_hprt0(core_if);
++				/* Clear suspend bit if resetting from suspended state. */
++				hprt0.b.prtsusp = 0;
++				/* When B-Host the Port reset bit is set in
++				 * the Start HCD Callback function, so that
++				 * the reset is started within 1ms of the HNP
++				 * success interrupt. */
++				if (!dwc_otg_hcd_is_b_host(dwc_otg_hcd)) {
++					hprt0.b.prtpwr = 1;
++					hprt0.b.prtrst = 1;
++					DWC_PRINTF("Indeed it is in host mode hprt0 = %08x\n",hprt0.d32);
++					DWC_WRITE_REG32(core_if->host_if->hprt0,
++							hprt0.d32);
++				}
++				/* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
++				dwc_mdelay(60);
++				hprt0.b.prtrst = 0;
++				DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++				core_if->lx_state = DWC_OTG_L0;	/* Now back to the on state */
++			}
++			break;
++#ifdef DWC_HS_ELECT_TST
++		case UHF_PORT_TEST:
++			{
++				uint32_t t;
++				gintmsk_data_t gintmsk;
++
++				t = (wIndex >> 8);	/* MSB wIndex USB */
++				DWC_DEBUGPL(DBG_HCD,
++					    "DWC OTG HCD HUB CONTROL - "
++					    "SetPortFeature - USB_PORT_FEAT_TEST %d\n",
++					    t);
++				DWC_WARN("USB_PORT_FEAT_TEST %d\n", t);
++				if (t < 6) {
++					hprt0.d32 = dwc_otg_read_hprt0(core_if);
++					hprt0.b.prttstctl = t;
++					DWC_WRITE_REG32(core_if->host_if->hprt0,
++							hprt0.d32);
++				} else {
++					/* Setup global vars with reg addresses (quick and
++					 * dirty hack, should be cleaned up)
++					 */
++					global_regs = core_if->core_global_regs;
++					hc_global_regs =
++					    core_if->host_if->host_global_regs;
++					hc_regs =
++					    (dwc_otg_hc_regs_t *) ((char *)
++								   global_regs +
++								   0x500);
++					data_fifo =
++					    (uint32_t *) ((char *)global_regs +
++							  0x1000);
++
++					if (t == 6) {	/* HS_HOST_PORT_SUSPEND_RESUME */
++						/* Save current interrupt mask */
++						gintmsk.d32 =
++						    DWC_READ_REG32
++						    (&global_regs->gintmsk);
++
++						/* Disable all interrupts while we muck with
++						 * the hardware directly
++						 */
++						DWC_WRITE_REG32(&global_regs->gintmsk, 0);
++
++						/* 15 second delay per the test spec */
++						dwc_mdelay(15000);
++
++						/* Drive suspend on the root port */
++						hprt0.d32 =
++						    dwc_otg_read_hprt0(core_if);
++						hprt0.b.prtsusp = 1;
++						hprt0.b.prtres = 0;
++						DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++
++						/* 15 second delay per the test spec */
++						dwc_mdelay(15000);
++
++						/* Drive resume on the root port */
++						hprt0.d32 =
++						    dwc_otg_read_hprt0(core_if);
++						hprt0.b.prtsusp = 0;
++						hprt0.b.prtres = 1;
++						DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++						dwc_mdelay(100);
++
++						/* Clear the resume bit */
++						hprt0.b.prtres = 0;
++						DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++
++						/* Restore interrupts */
++						DWC_WRITE_REG32(&global_regs->gintmsk, gintmsk.d32);
++					} else if (t == 7) {	/* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */
++						/* Save current interrupt mask */
++						gintmsk.d32 =
++						    DWC_READ_REG32
++						    (&global_regs->gintmsk);
++
++						/* Disable all interrupts while we muck with
++						 * the hardware directly
++						 */
++						DWC_WRITE_REG32(&global_regs->gintmsk, 0);
++
++						/* 15 second delay per the test spec */
++						dwc_mdelay(15000);
++
++						/* Send the Setup packet */
++						do_setup();
++
++						/* 15 second delay so nothing else happens for awhile */
++						dwc_mdelay(15000);
++
++						/* Restore interrupts */
++						DWC_WRITE_REG32(&global_regs->gintmsk, gintmsk.d32);
++					} else if (t == 8) {	/* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */
++						/* Save current interrupt mask */
++						gintmsk.d32 =
++						    DWC_READ_REG32
++						    (&global_regs->gintmsk);
++
++						/* Disable all interrupts while we muck with
++						 * the hardware directly
++						 */
++						DWC_WRITE_REG32(&global_regs->gintmsk, 0);
++
++						/* Send the Setup packet */
++						do_setup();
++
++						/* 15 second delay so nothing else happens for awhile */
++						dwc_mdelay(15000);
++
++						/* Send the In and Ack packets */
++						do_in_ack();
++
++						/* 15 second delay so nothing else happens for awhile */
++						dwc_mdelay(15000);
++
++						/* Restore interrupts */
++						DWC_WRITE_REG32(&global_regs->gintmsk, gintmsk.d32);
++					}
++				}
++				break;
++			}
++#endif /* DWC_HS_ELECT_TST */
++
++		case UHF_PORT_INDICATOR:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "SetPortFeature - USB_PORT_FEAT_INDICATOR\n");
++			/* Not supported */
++			break;
++		default:
++			retval = -DWC_E_INVALID;
++			DWC_ERROR("DWC OTG HCD - "
++				  "SetPortFeature request %xh "
++				  "unknown or unsupported\n", wValue);
++			break;
++		}
++		break;
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	case UCR_SET_AND_TEST_PORT_FEATURE:
++		if (wValue != UHF_PORT_L1) {
++			goto error;
++		}
++		{
++			int portnum, hird, devaddr, remwake;
++			glpmcfg_data_t lpmcfg;
++			uint32_t time_usecs;
++			gintsts_data_t gintsts;
++			gintmsk_data_t gintmsk;
++
++			if (!dwc_otg_get_param_lpm_enable(core_if)) {
++				goto error;
++			}
++			if (wValue != UHF_PORT_L1 || wLength != 1) {
++				goto error;
++			}
++			/* Check if the port currently is in SLEEP state */
++			lpmcfg.d32 =
++			    DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++			if (lpmcfg.b.prt_sleep_sts) {
++				DWC_INFO("Port is already in sleep mode\n");
++				buf[0] = 0;	/* Return success */
++				break;
++			}
++
++			portnum = wIndex & 0xf;
++			hird = (wIndex >> 4) & 0xf;
++			devaddr = (wIndex >> 8) & 0x7f;
++			remwake = (wIndex >> 15);
++
++			if (portnum != 1) {
++				retval = -DWC_E_INVALID;
++				DWC_WARN
++				    ("Wrong port number(%d) in SetandTestPortFeature request\n",
++				     portnum);
++				break;
++			}
++
++			DWC_PRINTF
++			    ("SetandTestPortFeature request: portnum = %d, hird = %d, devaddr = %d, rewake = %d\n",
++			     portnum, hird, devaddr, remwake);
++			/* Disable LPM interrupt */
++			gintmsk.d32 = 0;
++			gintmsk.b.lpmtranrcvd = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk,
++					 gintmsk.d32, 0);
++
++			if (dwc_otg_hcd_send_lpm
++			    (dwc_otg_hcd, devaddr, hird, remwake)) {
++				retval = -DWC_E_INVALID;
++				break;
++			}
++
++			time_usecs = 10 * (lpmcfg.b.retry_count + 1);
++			/* We will consider timeout if time_usecs microseconds pass,
++			 * and we don't receive LPM transaction status.
++			 * After receiving non-error responce(ACK/NYET/STALL) from device,
++			 *  core will set lpmtranrcvd bit.
++			 */
++			do {
++				gintsts.d32 =
++				    DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++				if (gintsts.b.lpmtranrcvd) {
++					break;
++				}
++				dwc_udelay(1);
++			} while (--time_usecs);
++			/* lpm_int bit will be cleared in LPM interrupt handler */
++
++			/* Now fill status
++			 * 0x00 - Success
++			 * 0x10 - NYET
++			 * 0x11 - Timeout
++			 */
++			if (!gintsts.b.lpmtranrcvd) {
++				buf[0] = 0x3;	/* Completion code is Timeout */
++				dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd);
++			} else {
++				lpmcfg.d32 =
++				    DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++				if (lpmcfg.b.lpm_resp == 0x3) {
++					/* ACK responce from the device */
++					buf[0] = 0x00;	/* Success */
++				} else if (lpmcfg.b.lpm_resp == 0x2) {
++					/* NYET responce from the device */
++					buf[0] = 0x2;
++				} else {
++					/* Otherwise responce with Timeout */
++					buf[0] = 0x3;
++				}
++			}
++			DWC_PRINTF("Device responce to LPM trans is %x\n",
++				   lpmcfg.b.lpm_resp);
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0,
++					 gintmsk.d32);
++
++			break;
++		}
++#endif /* CONFIG_USB_DWC_OTG_LPM */
++	default:
++error:
++		retval = -DWC_E_INVALID;
++		DWC_WARN("DWC OTG HCD - "
++			 "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n",
++			 typeReq, wIndex, wValue);
++		break;
++	}
++
++	return retval;
++}
++
++#ifdef CONFIG_USB_DWC_OTG_LPM
++/** Returns index of host channel to perform LPM transaction. */
++int dwc_otg_hcd_get_hc_for_lpm_tran(dwc_otg_hcd_t * hcd, uint8_t devaddr)
++{
++	dwc_otg_core_if_t *core_if = hcd->core_if;
++	dwc_hc_t *hc;
++	hcchar_data_t hcchar;
++	gintmsk_data_t gintmsk = {.d32 = 0 };
++
++	if (DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) {
++		DWC_PRINTF("No free channel to select for LPM transaction\n");
++		return -1;
++	}
++
++	hc = DWC_CIRCLEQ_FIRST(&hcd->free_hc_list);
++
++	/* Mask host channel interrupts. */
++	gintmsk.b.hcintr = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
++
++	/* Fill fields that core needs for LPM transaction */
++	hcchar.b.devaddr = devaddr;
++	hcchar.b.epnum = 0;
++	hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++	hcchar.b.mps = 64;
++	hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW);
++	hcchar.b.epdir = 0;	/* OUT */
++	DWC_WRITE_REG32(&core_if->host_if->hc_regs[hc->hc_num]->hcchar,
++			hcchar.d32);
++
++	/* Remove the host channel from the free list. */
++	DWC_CIRCLEQ_REMOVE_INIT(&hcd->free_hc_list, hc, hc_list_entry);
++
++	DWC_PRINTF("hcnum = %d devaddr = %d\n", hc->hc_num, devaddr);
++
++	return hc->hc_num;
++}
++
++/** Release hc after performing LPM transaction */
++void dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd_t * hcd)
++{
++	dwc_hc_t *hc;
++	glpmcfg_data_t lpmcfg;
++	uint8_t hc_num;
++
++	lpmcfg.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->glpmcfg);
++	hc_num = lpmcfg.b.lpm_chan_index;
++
++	hc = hcd->hc_ptr_array[hc_num];
++
++	DWC_PRINTF("Freeing channel %d after LPM\n", hc_num);
++	/* Return host channel to free list */
++	DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry);
++}
++
++int dwc_otg_hcd_send_lpm(dwc_otg_hcd_t * hcd, uint8_t devaddr, uint8_t hird,
++			 uint8_t bRemoteWake)
++{
++	glpmcfg_data_t lpmcfg;
++	pcgcctl_data_t pcgcctl = {.d32 = 0 };
++	int channel;
++
++	channel = dwc_otg_hcd_get_hc_for_lpm_tran(hcd, devaddr);
++	if (channel < 0) {
++		return channel;
++	}
++
++	pcgcctl.b.enbl_sleep_gating = 1;
++	DWC_MODIFY_REG32(hcd->core_if->pcgcctl, 0, pcgcctl.d32);
++
++	/* Read LPM config register */
++	lpmcfg.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->glpmcfg);
++
++	/* Program LPM transaction fields */
++	lpmcfg.b.rem_wkup_en = bRemoteWake;
++	lpmcfg.b.hird = hird;
++	lpmcfg.b.hird_thres = 0x1c;
++	lpmcfg.b.lpm_chan_index = channel;
++	lpmcfg.b.en_utmi_sleep = 1;
++	/* Program LPM config register */
++	DWC_WRITE_REG32(&hcd->core_if->core_global_regs->glpmcfg, lpmcfg.d32);
++
++	/* Send LPM transaction */
++	lpmcfg.b.send_lpm = 1;
++	DWC_WRITE_REG32(&hcd->core_if->core_global_regs->glpmcfg, lpmcfg.d32);
++
++	return 0;
++}
++
++#endif /* CONFIG_USB_DWC_OTG_LPM */
++
++int dwc_otg_hcd_is_status_changed(dwc_otg_hcd_t * hcd, int port)
++{
++	int retval;
++
++	if (port != 1) {
++		return -DWC_E_INVALID;
++	}
++
++	retval = (hcd->flags.b.port_connect_status_change ||
++		  hcd->flags.b.port_reset_change ||
++		  hcd->flags.b.port_enable_change ||
++		  hcd->flags.b.port_suspend_change ||
++		  hcd->flags.b.port_over_current_change);
++#ifdef DEBUG
++	if (retval) {
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:"
++			    " Root port status changed\n");
++		DWC_DEBUGPL(DBG_HCDV, "  port_connect_status_change: %d\n",
++			    hcd->flags.b.port_connect_status_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_reset_change: %d\n",
++			    hcd->flags.b.port_reset_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_enable_change: %d\n",
++			    hcd->flags.b.port_enable_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_suspend_change: %d\n",
++			    hcd->flags.b.port_suspend_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_over_current_change: %d\n",
++			    hcd->flags.b.port_over_current_change);
++	}
++#endif
++	return retval;
++}
++
++int dwc_otg_hcd_get_frame_number(dwc_otg_hcd_t * dwc_otg_hcd)
++{
++	hfnum_data_t hfnum;
++	hfnum.d32 =
++	    DWC_READ_REG32(&dwc_otg_hcd->core_if->host_if->host_global_regs->
++			   hfnum);
++
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n",
++		    hfnum.b.frnum);
++#endif
++	return hfnum.b.frnum;
++}
++
++int dwc_otg_hcd_start(dwc_otg_hcd_t * hcd,
++		      struct dwc_otg_hcd_function_ops *fops)
++{
++	int retval = 0;
++
++	hcd->fops = fops;
++	if (!dwc_otg_is_device_mode(hcd->core_if) &&
++		(!hcd->core_if->adp_enable || hcd->core_if->adp.adp_started)) {
++		dwc_otg_hcd_reinit(hcd);
++	} else {
++		retval = -DWC_E_NO_DEVICE;
++	}
++
++	return retval;
++}
++
++void *dwc_otg_hcd_get_priv_data(dwc_otg_hcd_t * hcd)
++{
++	return hcd->priv;
++}
++
++void dwc_otg_hcd_set_priv_data(dwc_otg_hcd_t * hcd, void *priv_data)
++{
++	hcd->priv = priv_data;
++}
++
++uint32_t dwc_otg_hcd_otg_port(dwc_otg_hcd_t * hcd)
++{
++	return hcd->otg_port;
++}
++
++uint32_t dwc_otg_hcd_is_b_host(dwc_otg_hcd_t * hcd)
++{
++	uint32_t is_b_host;
++	if (hcd->core_if->op_state == B_HOST) {
++		is_b_host = 1;
++	} else {
++		is_b_host = 0;
++	}
++
++	return is_b_host;
++}
++
++dwc_otg_hcd_urb_t *dwc_otg_hcd_urb_alloc(dwc_otg_hcd_t * hcd,
++					 int iso_desc_count, int atomic_alloc)
++{
++	dwc_otg_hcd_urb_t *dwc_otg_urb;
++	uint32_t size;
++
++	size =
++	    sizeof(*dwc_otg_urb) +
++	    iso_desc_count * sizeof(struct dwc_otg_hcd_iso_packet_desc);
++	if (atomic_alloc)
++		dwc_otg_urb = DWC_ALLOC_ATOMIC(size);
++	else
++		dwc_otg_urb = DWC_ALLOC(size);
++
++        if (dwc_otg_urb)
++		dwc_otg_urb->packet_count = iso_desc_count;
++        else {
++		DWC_ERROR("**** DWC OTG HCD URB alloc - "
++			"%salloc of %db failed\n",
++			atomic_alloc?"atomic ":"", size);
++	}
++	return dwc_otg_urb;
++}
++
++void dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_hcd_urb_t * dwc_otg_urb,
++				  uint8_t dev_addr, uint8_t ep_num,
++				  uint8_t ep_type, uint8_t ep_dir, uint16_t mps)
++{
++	dwc_otg_hcd_fill_pipe(&dwc_otg_urb->pipe_info, dev_addr, ep_num,
++			      ep_type, ep_dir, mps);
++#if 0
++	DWC_PRINTF
++	    ("addr = %d, ep_num = %d, ep_dir = 0x%x, ep_type = 0x%x, mps = %d\n",
++	     dev_addr, ep_num, ep_dir, ep_type, mps);
++#endif
++}
++
++void dwc_otg_hcd_urb_set_params(dwc_otg_hcd_urb_t * dwc_otg_urb,
++				void *urb_handle, void *buf, dwc_dma_t dma,
++				uint32_t buflen, void *setup_packet,
++				dwc_dma_t setup_dma, uint32_t flags,
++				uint16_t interval)
++{
++	dwc_otg_urb->priv = urb_handle;
++	dwc_otg_urb->buf = buf;
++	dwc_otg_urb->dma = dma;
++	dwc_otg_urb->length = buflen;
++	dwc_otg_urb->setup_packet = setup_packet;
++	dwc_otg_urb->setup_dma = setup_dma;
++	dwc_otg_urb->flags = flags;
++	dwc_otg_urb->interval = interval;
++	dwc_otg_urb->status = -DWC_E_IN_PROGRESS;
++}
++
++uint32_t dwc_otg_hcd_urb_get_status(dwc_otg_hcd_urb_t * dwc_otg_urb)
++{
++	return dwc_otg_urb->status;
++}
++
++uint32_t dwc_otg_hcd_urb_get_actual_length(dwc_otg_hcd_urb_t * dwc_otg_urb)
++{
++	return dwc_otg_urb->actual_length;
++}
++
++uint32_t dwc_otg_hcd_urb_get_error_count(dwc_otg_hcd_urb_t * dwc_otg_urb)
++{
++	return dwc_otg_urb->error_count;
++}
++
++void dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_hcd_urb_t * dwc_otg_urb,
++					 int desc_num, uint32_t offset,
++					 uint32_t length)
++{
++	dwc_otg_urb->iso_descs[desc_num].offset = offset;
++	dwc_otg_urb->iso_descs[desc_num].length = length;
++}
++
++uint32_t dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_hcd_urb_t * dwc_otg_urb,
++					     int desc_num)
++{
++	return dwc_otg_urb->iso_descs[desc_num].status;
++}
++
++uint32_t dwc_otg_hcd_urb_get_iso_desc_actual_length(dwc_otg_hcd_urb_t *
++						    dwc_otg_urb, int desc_num)
++{
++	return dwc_otg_urb->iso_descs[desc_num].actual_length;
++}
++
++int dwc_otg_hcd_is_bandwidth_allocated(dwc_otg_hcd_t * hcd, void *ep_handle)
++{
++	int allocated = 0;
++	dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle;
++
++	if (qh) {
++		if (!DWC_LIST_EMPTY(&qh->qh_list_entry)) {
++			allocated = 1;
++		}
++	}
++	return allocated;
++}
++
++int dwc_otg_hcd_is_bandwidth_freed(dwc_otg_hcd_t * hcd, void *ep_handle)
++{
++	dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle;
++	int freed = 0;
++	DWC_ASSERT(qh, "qh is not allocated\n");
++
++	if (DWC_LIST_EMPTY(&qh->qh_list_entry)) {
++		freed = 1;
++	}
++
++	return freed;
++}
++
++uint8_t dwc_otg_hcd_get_ep_bandwidth(dwc_otg_hcd_t * hcd, void *ep_handle)
++{
++	dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle;
++	DWC_ASSERT(qh, "qh is not allocated\n");
++	return qh->usecs;
++}
++
++void dwc_otg_hcd_dump_state(dwc_otg_hcd_t * hcd)
++{
++#ifdef DEBUG
++	int num_channels;
++	int i;
++	gnptxsts_data_t np_tx_status;
++	hptxsts_data_t p_tx_status;
++
++	num_channels = hcd->core_if->core_params->host_channels;
++	DWC_PRINTF("\n");
++	DWC_PRINTF
++	    ("************************************************************\n");
++	DWC_PRINTF("HCD State:\n");
++	DWC_PRINTF("  Num channels: %d\n", num_channels);
++	for (i = 0; i < num_channels; i++) {
++		dwc_hc_t *hc = hcd->hc_ptr_array[i];
++		DWC_PRINTF("  Channel %d:\n", i);
++		DWC_PRINTF("    dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
++			   hc->dev_addr, hc->ep_num, hc->ep_is_in);
++		DWC_PRINTF("    speed: %d\n", hc->speed);
++		DWC_PRINTF("    ep_type: %d\n", hc->ep_type);
++		DWC_PRINTF("    max_packet: %d\n", hc->max_packet);
++		DWC_PRINTF("    data_pid_start: %d\n", hc->data_pid_start);
++		DWC_PRINTF("    multi_count: %d\n", hc->multi_count);
++		DWC_PRINTF("    xfer_started: %d\n", hc->xfer_started);
++		DWC_PRINTF("    xfer_buff: %p\n", hc->xfer_buff);
++		DWC_PRINTF("    xfer_len: %d\n", hc->xfer_len);
++		DWC_PRINTF("    xfer_count: %d\n", hc->xfer_count);
++		DWC_PRINTF("    halt_on_queue: %d\n", hc->halt_on_queue);
++		DWC_PRINTF("    halt_pending: %d\n", hc->halt_pending);
++		DWC_PRINTF("    halt_status: %d\n", hc->halt_status);
++		DWC_PRINTF("    do_split: %d\n", hc->do_split);
++		DWC_PRINTF("    complete_split: %d\n", hc->complete_split);
++		DWC_PRINTF("    hub_addr: %d\n", hc->hub_addr);
++		DWC_PRINTF("    port_addr: %d\n", hc->port_addr);
++		DWC_PRINTF("    xact_pos: %d\n", hc->xact_pos);
++		DWC_PRINTF("    requests: %d\n", hc->requests);
++		DWC_PRINTF("    qh: %p\n", hc->qh);
++		if (hc->xfer_started) {
++			hfnum_data_t hfnum;
++			hcchar_data_t hcchar;
++			hctsiz_data_t hctsiz;
++			hcint_data_t hcint;
++			hcintmsk_data_t hcintmsk;
++			hfnum.d32 =
++			    DWC_READ_REG32(&hcd->core_if->
++					   host_if->host_global_regs->hfnum);
++			hcchar.d32 =
++			    DWC_READ_REG32(&hcd->core_if->host_if->
++					   hc_regs[i]->hcchar);
++			hctsiz.d32 =
++			    DWC_READ_REG32(&hcd->core_if->host_if->
++					   hc_regs[i]->hctsiz);
++			hcint.d32 =
++			    DWC_READ_REG32(&hcd->core_if->host_if->
++					   hc_regs[i]->hcint);
++			hcintmsk.d32 =
++			    DWC_READ_REG32(&hcd->core_if->host_if->
++					   hc_regs[i]->hcintmsk);
++			DWC_PRINTF("    hfnum: 0x%08x\n", hfnum.d32);
++			DWC_PRINTF("    hcchar: 0x%08x\n", hcchar.d32);
++			DWC_PRINTF("    hctsiz: 0x%08x\n", hctsiz.d32);
++			DWC_PRINTF("    hcint: 0x%08x\n", hcint.d32);
++			DWC_PRINTF("    hcintmsk: 0x%08x\n", hcintmsk.d32);
++		}
++		if (hc->xfer_started && hc->qh) {
++			dwc_otg_qtd_t *qtd;
++			dwc_otg_hcd_urb_t *urb;
++
++			DWC_CIRCLEQ_FOREACH(qtd, &hc->qh->qtd_list, qtd_list_entry) {
++				if (!qtd->in_process)
++					break;
++
++				urb = qtd->urb;
++			DWC_PRINTF("    URB Info:\n");
++			DWC_PRINTF("      qtd: %p, urb: %p\n", qtd, urb);
++			if (urb) {
++				DWC_PRINTF("      Dev: %d, EP: %d %s\n",
++					   dwc_otg_hcd_get_dev_addr(&urb->
++								    pipe_info),
++					   dwc_otg_hcd_get_ep_num(&urb->
++								  pipe_info),
++					   dwc_otg_hcd_is_pipe_in(&urb->
++								  pipe_info) ?
++					   "IN" : "OUT");
++				DWC_PRINTF("      Max packet size: %d\n",
++					   dwc_otg_hcd_get_mps(&urb->
++							       pipe_info));
++				DWC_PRINTF("      transfer_buffer: %p\n",
++					   urb->buf);
++				DWC_PRINTF("      transfer_dma: %p\n",
++					   (void *)urb->dma);
++				DWC_PRINTF("      transfer_buffer_length: %d\n",
++					   urb->length);
++					DWC_PRINTF("      actual_length: %d\n",
++						   urb->actual_length);
++				}
++			}
++		}
++	}
++	DWC_PRINTF("  non_periodic_channels: %d\n", hcd->non_periodic_channels);
++	DWC_PRINTF("  periodic_channels: %d\n", hcd->periodic_channels);
++	DWC_PRINTF("  periodic_usecs: %d\n", hcd->periodic_usecs);
++	np_tx_status.d32 =
++	    DWC_READ_REG32(&hcd->core_if->core_global_regs->gnptxsts);
++	DWC_PRINTF("  NP Tx Req Queue Space Avail: %d\n",
++		   np_tx_status.b.nptxqspcavail);
++	DWC_PRINTF("  NP Tx FIFO Space Avail: %d\n",
++		   np_tx_status.b.nptxfspcavail);
++	p_tx_status.d32 =
++	    DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hptxsts);
++	DWC_PRINTF("  P Tx Req Queue Space Avail: %d\n",
++		   p_tx_status.b.ptxqspcavail);
++	DWC_PRINTF("  P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail);
++	dwc_otg_hcd_dump_frrem(hcd);
++	dwc_otg_dump_global_registers(hcd->core_if);
++	dwc_otg_dump_host_registers(hcd->core_if);
++	DWC_PRINTF
++	    ("************************************************************\n");
++	DWC_PRINTF("\n");
++#endif
++}
++
++#ifdef DEBUG
++void dwc_print_setup_data(uint8_t * setup)
++{
++	int i;
++	if (CHK_DEBUG_LEVEL(DBG_HCD)) {
++		DWC_PRINTF("Setup Data = MSB ");
++		for (i = 7; i >= 0; i--)
++			DWC_PRINTF("%02x ", setup[i]);
++		DWC_PRINTF("\n");
++		DWC_PRINTF("  bmRequestType Tranfer = %s\n",
++			   (setup[0] & 0x80) ? "Device-to-Host" :
++			   "Host-to-Device");
++		DWC_PRINTF("  bmRequestType Type = ");
++		switch ((setup[0] & 0x60) >> 5) {
++		case 0:
++			DWC_PRINTF("Standard\n");
++			break;
++		case 1:
++			DWC_PRINTF("Class\n");
++			break;
++		case 2:
++			DWC_PRINTF("Vendor\n");
++			break;
++		case 3:
++			DWC_PRINTF("Reserved\n");
++			break;
++		}
++		DWC_PRINTF("  bmRequestType Recipient = ");
++		switch (setup[0] & 0x1f) {
++		case 0:
++			DWC_PRINTF("Device\n");
++			break;
++		case 1:
++			DWC_PRINTF("Interface\n");
++			break;
++		case 2:
++			DWC_PRINTF("Endpoint\n");
++			break;
++		case 3:
++			DWC_PRINTF("Other\n");
++			break;
++		default:
++			DWC_PRINTF("Reserved\n");
++			break;
++		}
++		DWC_PRINTF("  bRequest = 0x%0x\n", setup[1]);
++		DWC_PRINTF("  wValue = 0x%0x\n", *((uint16_t *) & setup[2]));
++		DWC_PRINTF("  wIndex = 0x%0x\n", *((uint16_t *) & setup[4]));
++		DWC_PRINTF("  wLength = 0x%0x\n\n", *((uint16_t *) & setup[6]));
++	}
++}
++#endif
++
++void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * hcd)
++{
++#if 0
++	DWC_PRINTF("Frame remaining at SOF:\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->frrem_samples, hcd->frrem_accum,
++		   (hcd->frrem_samples > 0) ?
++		   hcd->frrem_accum / hcd->frrem_samples : 0);
++
++	DWC_PRINTF("\n");
++	DWC_PRINTF("Frame remaining at start_transfer (uframe 7):\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->core_if->hfnum_7_samples,
++		   hcd->core_if->hfnum_7_frrem_accum,
++		   (hcd->core_if->hfnum_7_samples >
++		    0) ? hcd->core_if->hfnum_7_frrem_accum /
++		   hcd->core_if->hfnum_7_samples : 0);
++	DWC_PRINTF("Frame remaining at start_transfer (uframe 0):\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->core_if->hfnum_0_samples,
++		   hcd->core_if->hfnum_0_frrem_accum,
++		   (hcd->core_if->hfnum_0_samples >
++		    0) ? hcd->core_if->hfnum_0_frrem_accum /
++		   hcd->core_if->hfnum_0_samples : 0);
++	DWC_PRINTF("Frame remaining at start_transfer (uframe 1-6):\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->core_if->hfnum_other_samples,
++		   hcd->core_if->hfnum_other_frrem_accum,
++		   (hcd->core_if->hfnum_other_samples >
++		    0) ? hcd->core_if->hfnum_other_frrem_accum /
++		   hcd->core_if->hfnum_other_samples : 0);
++
++	DWC_PRINTF("\n");
++	DWC_PRINTF("Frame remaining at sample point A (uframe 7):\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->hfnum_7_samples_a, hcd->hfnum_7_frrem_accum_a,
++		   (hcd->hfnum_7_samples_a > 0) ?
++		   hcd->hfnum_7_frrem_accum_a / hcd->hfnum_7_samples_a : 0);
++	DWC_PRINTF("Frame remaining at sample point A (uframe 0):\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->hfnum_0_samples_a, hcd->hfnum_0_frrem_accum_a,
++		   (hcd->hfnum_0_samples_a > 0) ?
++		   hcd->hfnum_0_frrem_accum_a / hcd->hfnum_0_samples_a : 0);
++	DWC_PRINTF("Frame remaining at sample point A (uframe 1-6):\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->hfnum_other_samples_a, hcd->hfnum_other_frrem_accum_a,
++		   (hcd->hfnum_other_samples_a > 0) ?
++		   hcd->hfnum_other_frrem_accum_a /
++		   hcd->hfnum_other_samples_a : 0);
++
++	DWC_PRINTF("\n");
++	DWC_PRINTF("Frame remaining at sample point B (uframe 7):\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->hfnum_7_samples_b, hcd->hfnum_7_frrem_accum_b,
++		   (hcd->hfnum_7_samples_b > 0) ?
++		   hcd->hfnum_7_frrem_accum_b / hcd->hfnum_7_samples_b : 0);
++	DWC_PRINTF("Frame remaining at sample point B (uframe 0):\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->hfnum_0_samples_b, hcd->hfnum_0_frrem_accum_b,
++		   (hcd->hfnum_0_samples_b > 0) ?
++		   hcd->hfnum_0_frrem_accum_b / hcd->hfnum_0_samples_b : 0);
++	DWC_PRINTF("Frame remaining at sample point B (uframe 1-6):\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->hfnum_other_samples_b, hcd->hfnum_other_frrem_accum_b,
++		   (hcd->hfnum_other_samples_b > 0) ?
++		   hcd->hfnum_other_frrem_accum_b /
++		   hcd->hfnum_other_samples_b : 0);
++#endif
++}
++
++#endif /* DWC_DEVICE_ONLY */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,1132 @@
++/*==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_ddma.c $
++ * $Revision: #10 $
++ * $Date: 2011/10/20 $
++ * $Change: 1869464 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++/** @file
++ * This file contains Descriptor DMA support implementation for host mode.
++ */
++
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_regs.h"
++
++extern bool microframe_schedule;
++
++static inline uint8_t frame_list_idx(uint16_t frame)
++{
++	return (frame & (MAX_FRLIST_EN_NUM - 1));
++}
++
++static inline uint16_t desclist_idx_inc(uint16_t idx, uint16_t inc, uint8_t speed)
++{
++	return (idx + inc) &
++	    (((speed ==
++	       DWC_OTG_EP_SPEED_HIGH) ? MAX_DMA_DESC_NUM_HS_ISOC :
++	      MAX_DMA_DESC_NUM_GENERIC) - 1);
++}
++
++static inline uint16_t desclist_idx_dec(uint16_t idx, uint16_t inc, uint8_t speed)
++{
++	return (idx - inc) &
++	    (((speed ==
++	       DWC_OTG_EP_SPEED_HIGH) ? MAX_DMA_DESC_NUM_HS_ISOC :
++	      MAX_DMA_DESC_NUM_GENERIC) - 1);
++}
++
++static inline uint16_t max_desc_num(dwc_otg_qh_t * qh)
++{
++	return (((qh->ep_type == UE_ISOCHRONOUS)
++		 && (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH))
++		? MAX_DMA_DESC_NUM_HS_ISOC : MAX_DMA_DESC_NUM_GENERIC);
++}
++static inline uint16_t frame_incr_val(dwc_otg_qh_t * qh)
++{
++	return ((qh->dev_speed == DWC_OTG_EP_SPEED_HIGH)
++		? ((qh->interval + 8 - 1) / 8)
++		: qh->interval);
++}
++
++static int desc_list_alloc(dwc_otg_qh_t * qh)
++{
++	int retval = 0;
++
++	qh->desc_list = (dwc_otg_host_dma_desc_t *)
++	    DWC_DMA_ALLOC(sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh),
++			  &qh->desc_list_dma);
++
++	if (!qh->desc_list) {
++		retval = -DWC_E_NO_MEMORY;
++		DWC_ERROR("%s: DMA descriptor list allocation failed\n", __func__);
++
++	}
++
++	dwc_memset(qh->desc_list, 0x00,
++		   sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh));
++
++	qh->n_bytes =
++	    (uint32_t *) DWC_ALLOC(sizeof(uint32_t) * max_desc_num(qh));
++
++	if (!qh->n_bytes) {
++		retval = -DWC_E_NO_MEMORY;
++		DWC_ERROR
++		    ("%s: Failed to allocate array for descriptors' size actual values\n",
++		     __func__);
++
++	}
++	return retval;
++
++}
++
++static void desc_list_free(dwc_otg_qh_t * qh)
++{
++	if (qh->desc_list) {
++		DWC_DMA_FREE(max_desc_num(qh), qh->desc_list,
++			     qh->desc_list_dma);
++		qh->desc_list = NULL;
++	}
++
++	if (qh->n_bytes) {
++		DWC_FREE(qh->n_bytes);
++		qh->n_bytes = NULL;
++	}
++}
++
++static int frame_list_alloc(dwc_otg_hcd_t * hcd)
++{
++	int retval = 0;
++	if (hcd->frame_list)
++		return 0;
++
++	hcd->frame_list = DWC_DMA_ALLOC(4 * MAX_FRLIST_EN_NUM,
++					&hcd->frame_list_dma);
++	if (!hcd->frame_list) {
++		retval = -DWC_E_NO_MEMORY;
++		DWC_ERROR("%s: Frame List allocation failed\n", __func__);
++	}
++
++	dwc_memset(hcd->frame_list, 0x00, 4 * MAX_FRLIST_EN_NUM);
++
++	return retval;
++}
++
++static void frame_list_free(dwc_otg_hcd_t * hcd)
++{
++	if (!hcd->frame_list)
++		return;
++
++	DWC_DMA_FREE(4 * MAX_FRLIST_EN_NUM, hcd->frame_list, hcd->frame_list_dma);
++	hcd->frame_list = NULL;
++}
++
++static void per_sched_enable(dwc_otg_hcd_t * hcd, uint16_t fr_list_en)
++{
++
++	hcfg_data_t hcfg;
++
++	hcfg.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hcfg);
++
++	if (hcfg.b.perschedena) {
++		/* already enabled */
++		return;
++	}
++
++	DWC_WRITE_REG32(&hcd->core_if->host_if->host_global_regs->hflbaddr,
++			hcd->frame_list_dma);
++
++	switch (fr_list_en) {
++	case 64:
++		hcfg.b.frlisten = 3;
++		break;
++	case 32:
++		hcfg.b.frlisten = 2;
++		break;
++	case 16:
++		hcfg.b.frlisten = 1;
++		break;
++	case 8:
++		hcfg.b.frlisten = 0;
++		break;
++	default:
++		break;
++	}
++
++	hcfg.b.perschedena = 1;
++
++	DWC_DEBUGPL(DBG_HCD, "Enabling Periodic schedule\n");
++	DWC_WRITE_REG32(&hcd->core_if->host_if->host_global_regs->hcfg, hcfg.d32);
++
++}
++
++static void per_sched_disable(dwc_otg_hcd_t * hcd)
++{
++	hcfg_data_t hcfg;
++
++	hcfg.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hcfg);
++
++	if (!hcfg.b.perschedena) {
++		/* already disabled */
++		return;
++	}
++	hcfg.b.perschedena = 0;
++
++	DWC_DEBUGPL(DBG_HCD, "Disabling Periodic schedule\n");
++	DWC_WRITE_REG32(&hcd->core_if->host_if->host_global_regs->hcfg, hcfg.d32);
++}
++
++/*
++ * Activates/Deactivates FrameList entries for the channel
++ * based on endpoint servicing period.
++ */
++void update_frame_list(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, uint8_t enable)
++{
++	uint16_t i, j, inc;
++	dwc_hc_t *hc = NULL;
++
++	if (!qh->channel) {
++		DWC_ERROR("qh->channel = %p", qh->channel);
++		return;
++	}
++
++	if (!hcd) {
++		DWC_ERROR("------hcd = %p", hcd);
++		return;
++	}
++
++	if (!hcd->frame_list) {
++		DWC_ERROR("-------hcd->frame_list = %p", hcd->frame_list);
++		return;
++	}
++
++	hc = qh->channel;
++	inc = frame_incr_val(qh);
++	if (qh->ep_type == UE_ISOCHRONOUS)
++		i = frame_list_idx(qh->sched_frame);
++	else
++		i = 0;
++
++	j = i;
++	do {
++		if (enable)
++			hcd->frame_list[j] |= (1 << hc->hc_num);
++		else
++			hcd->frame_list[j] &= ~(1 << hc->hc_num);
++		j = (j + inc) & (MAX_FRLIST_EN_NUM - 1);
++	}
++	while (j != i);
++	if (!enable)
++		return;
++	hc->schinfo = 0;
++	if (qh->channel->speed == DWC_OTG_EP_SPEED_HIGH) {
++		j = 1;
++		/* TODO - check this */
++		inc = (8 + qh->interval - 1) / qh->interval;
++		for (i = 0; i < inc; i++) {
++			hc->schinfo |= j;
++			j = j << qh->interval;
++		}
++	} else {
++		hc->schinfo = 0xff;
++	}
++}
++
++#if 1
++void dump_frame_list(dwc_otg_hcd_t * hcd)
++{
++	int i = 0;
++	DWC_PRINTF("--FRAME LIST (hex) --\n");
++	for (i = 0; i < MAX_FRLIST_EN_NUM; i++) {
++		DWC_PRINTF("%x\t", hcd->frame_list[i]);
++		if (!(i % 8) && i)
++			DWC_PRINTF("\n");
++	}
++	DWC_PRINTF("\n----\n");
++
++}
++#endif
++
++static void release_channel_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	dwc_irqflags_t flags;
++	dwc_spinlock_t *channel_lock = hcd->channel_lock;
++
++	dwc_hc_t *hc = qh->channel;
++	if (dwc_qh_is_non_per(qh)) {
++		DWC_SPINLOCK_IRQSAVE(channel_lock, &flags);
++		if (!microframe_schedule)
++			hcd->non_periodic_channels--;
++		else
++			hcd->available_host_channels++;
++		DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
++	} else
++		update_frame_list(hcd, qh, 0);
++
++	/*
++	 * The condition is added to prevent double cleanup try in case of device
++	 * disconnect. See channel cleanup in dwc_otg_hcd_disconnect_cb().
++	 */
++	if (hc->qh) {
++		dwc_otg_hc_cleanup(hcd->core_if, hc);
++		DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry);
++		hc->qh = NULL;
++	}
++
++	qh->channel = NULL;
++	qh->ntd = 0;
++
++	if (qh->desc_list) {
++		dwc_memset(qh->desc_list, 0x00,
++			   sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh));
++	}
++}
++
++/**
++ * Initializes a QH structure's Descriptor DMA related members.
++ * Allocates memory for descriptor list.
++ * On first periodic QH, allocates memory for FrameList
++ * and enables periodic scheduling.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh The QH to init.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++int dwc_otg_hcd_qh_init_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	int retval = 0;
++
++	if (qh->do_split) {
++		DWC_ERROR("SPLIT Transfers are not supported in Descriptor DMA.\n");
++		return -1;
++	}
++
++	retval = desc_list_alloc(qh);
++
++	if ((retval == 0)
++	    && (qh->ep_type == UE_ISOCHRONOUS || qh->ep_type == UE_INTERRUPT)) {
++		if (!hcd->frame_list) {
++			retval = frame_list_alloc(hcd);
++			/* Enable periodic schedule on first periodic QH */
++			if (retval == 0)
++				per_sched_enable(hcd, MAX_FRLIST_EN_NUM);
++		}
++	}
++
++	qh->ntd = 0;
++
++	return retval;
++}
++
++/**
++ * Frees descriptor list memory associated with the QH.
++ * If QH is periodic and the last, frees FrameList memory
++ * and disables periodic scheduling.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh The QH to init.
++ */
++void dwc_otg_hcd_qh_free_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	desc_list_free(qh);
++
++	/*
++	 * Channel still assigned due to some reasons.
++	 * Seen on Isoc URB dequeue. Channel halted but no subsequent
++	 * ChHalted interrupt to release the channel. Afterwards
++	 * when it comes here from endpoint disable routine
++	 * channel remains assigned.
++	 */
++	if (qh->channel)
++		release_channel_ddma(hcd, qh);
++
++	if ((qh->ep_type == UE_ISOCHRONOUS || qh->ep_type == UE_INTERRUPT)
++	    && (microframe_schedule || !hcd->periodic_channels) && hcd->frame_list) {
++
++		per_sched_disable(hcd);
++		frame_list_free(hcd);
++	}
++}
++
++static uint8_t frame_to_desc_idx(dwc_otg_qh_t * qh, uint16_t frame_idx)
++{
++	if (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) {
++		/*
++		 * Descriptor set(8 descriptors) index
++		 * which is 8-aligned.
++		 */
++		return (frame_idx & ((MAX_DMA_DESC_NUM_HS_ISOC / 8) - 1)) * 8;
++	} else {
++		return (frame_idx & (MAX_DMA_DESC_NUM_GENERIC - 1));
++	}
++}
++
++/*
++ * Determine starting frame for Isochronous transfer.
++ * Few frames skipped to prevent race condition with HC.
++ */
++static uint8_t calc_starting_frame(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh,
++				   uint8_t * skip_frames)
++{
++	uint16_t frame = 0;
++	hcd->frame_number = dwc_otg_hcd_get_frame_number(hcd);
++
++	/* sched_frame is always frame number(not uFrame) both in FS and HS !! */
++
++	/*
++	 * skip_frames is used to limit activated descriptors number
++	 * to avoid the situation when HC services the last activated
++	 * descriptor firstly.
++	 * Example for FS:
++	 * Current frame is 1, scheduled frame is 3. Since HC always fetches the descriptor
++	 * corresponding to curr_frame+1, the descriptor corresponding to frame 2
++	 * will be fetched. If the number of descriptors is max=64 (or greather) the
++	 * list will be fully programmed with Active descriptors and it is possible
++	 * case(rare) that the latest descriptor(considering rollback) corresponding
++	 * to frame 2 will be serviced first. HS case is more probable because, in fact,
++	 * up to 11 uframes(16 in the code) may be skipped.
++	 */
++	if (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) {
++		/*
++		 * Consider uframe counter also, to start xfer asap.
++		 * If half of the frame elapsed skip 2 frames otherwise
++		 * just 1 frame.
++		 * Starting descriptor index must be 8-aligned, so
++		 * if the current frame is near to complete the next one
++		 * is skipped as well.
++		 */
++
++		if (dwc_micro_frame_num(hcd->frame_number) >= 5) {
++			*skip_frames = 2 * 8;
++			frame = dwc_frame_num_inc(hcd->frame_number, *skip_frames);
++		} else {
++			*skip_frames = 1 * 8;
++			frame = dwc_frame_num_inc(hcd->frame_number, *skip_frames);
++		}
++
++		frame = dwc_full_frame_num(frame);
++	} else {
++		/*
++		 * Two frames are skipped for FS - the current and the next.
++		 * But for descriptor programming, 1 frame(descriptor) is enough,
++		 * see example above.
++		 */
++		*skip_frames = 1;
++		frame = dwc_frame_num_inc(hcd->frame_number, 2);
++	}
++
++	return frame;
++}
++
++/*
++ * Calculate initial descriptor index for isochronous transfer
++ * based on scheduled frame.
++ */
++static uint8_t recalc_initial_desc_idx(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	uint16_t frame = 0, fr_idx, fr_idx_tmp;
++	uint8_t skip_frames = 0;
++	/*
++	 * With current ISOC processing algorithm the channel is being
++	 * released when no more QTDs in the list(qh->ntd == 0).
++	 * Thus this function is called only when qh->ntd == 0 and qh->channel == 0.
++	 *
++	 * So qh->channel != NULL branch is not used and just not removed from the
++	 * source file. It is required for another possible approach which is,
++	 * do not disable and release the channel when ISOC session completed,
++	 * just move QH to inactive schedule until new QTD arrives.
++	 * On new QTD, the QH moved back to 'ready' schedule,
++	 * starting frame and therefore starting desc_index are recalculated.
++	 * In this case channel is released only on ep_disable.
++	 */
++
++	/* Calculate starting descriptor index. For INTERRUPT endpoint it is always 0. */
++	if (qh->channel) {
++		frame = calc_starting_frame(hcd, qh, &skip_frames);
++		/*
++		 * Calculate initial descriptor index based on FrameList current bitmap
++		 * and servicing period.
++		 */
++		fr_idx_tmp = frame_list_idx(frame);
++		fr_idx =
++		    (MAX_FRLIST_EN_NUM + frame_list_idx(qh->sched_frame) -
++		     fr_idx_tmp)
++		    % frame_incr_val(qh);
++		fr_idx = (fr_idx + fr_idx_tmp) % MAX_FRLIST_EN_NUM;
++	} else {
++		qh->sched_frame = calc_starting_frame(hcd, qh, &skip_frames);
++		fr_idx = frame_list_idx(qh->sched_frame);
++	}
++
++	qh->td_first = qh->td_last = frame_to_desc_idx(qh, fr_idx);
++
++	return skip_frames;
++}
++
++#define	ISOC_URB_GIVEBACK_ASAP
++
++#define MAX_ISOC_XFER_SIZE_FS 1023
++#define MAX_ISOC_XFER_SIZE_HS 3072
++#define DESCNUM_THRESHOLD 4
++
++static void init_isoc_dma_desc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh,
++			       uint8_t skip_frames)
++{
++	struct dwc_otg_hcd_iso_packet_desc *frame_desc;
++	dwc_otg_qtd_t *qtd;
++	dwc_otg_host_dma_desc_t *dma_desc;
++	uint16_t idx, inc, n_desc, ntd_max, max_xfer_size;
++
++	idx = qh->td_last;
++	inc = qh->interval;
++	n_desc = 0;
++
++	ntd_max = (max_desc_num(qh) + qh->interval - 1) / qh->interval;
++	if (skip_frames && !qh->channel)
++		ntd_max = ntd_max - skip_frames / qh->interval;
++
++	max_xfer_size =
++	    (qh->dev_speed ==
++	     DWC_OTG_EP_SPEED_HIGH) ? MAX_ISOC_XFER_SIZE_HS :
++	    MAX_ISOC_XFER_SIZE_FS;
++
++	DWC_CIRCLEQ_FOREACH(qtd, &qh->qtd_list, qtd_list_entry) {
++		while ((qh->ntd < ntd_max)
++		       && (qtd->isoc_frame_index_last <
++			   qtd->urb->packet_count)) {
++
++			dma_desc = &qh->desc_list[idx];
++			dwc_memset(dma_desc, 0x00, sizeof(dwc_otg_host_dma_desc_t));
++
++			frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index_last];
++
++			if (frame_desc->length > max_xfer_size)
++				qh->n_bytes[idx] = max_xfer_size;
++			else
++				qh->n_bytes[idx] = frame_desc->length;
++			dma_desc->status.b_isoc.n_bytes = qh->n_bytes[idx];
++			dma_desc->status.b_isoc.a = 1;
++			dma_desc->status.b_isoc.sts = 0;
++
++			dma_desc->buf = qtd->urb->dma + frame_desc->offset;
++
++			qh->ntd++;
++
++			qtd->isoc_frame_index_last++;
++
++#ifdef	ISOC_URB_GIVEBACK_ASAP
++			/*
++			 * Set IOC for each descriptor corresponding to the
++			 * last frame of the URB.
++			 */
++			if (qtd->isoc_frame_index_last ==
++			    qtd->urb->packet_count)
++				dma_desc->status.b_isoc.ioc = 1;
++
++#endif
++			idx = desclist_idx_inc(idx, inc, qh->dev_speed);
++			n_desc++;
++
++		}
++		qtd->in_process = 1;
++	}
++
++	qh->td_last = idx;
++
++#ifdef	ISOC_URB_GIVEBACK_ASAP
++	/* Set IOC for the last descriptor if descriptor list is full */
++	if (qh->ntd == ntd_max) {
++		idx = desclist_idx_dec(qh->td_last, inc, qh->dev_speed);
++		qh->desc_list[idx].status.b_isoc.ioc = 1;
++	}
++#else
++	/*
++	 * Set IOC bit only for one descriptor.
++	 * Always try to be ahead of HW processing,
++	 * i.e. on IOC generation driver activates next descriptors but
++	 * core continues to process descriptors followed the one with IOC set.
++	 */
++
++	if (n_desc > DESCNUM_THRESHOLD) {
++		/*
++		 * Move IOC "up". Required even if there is only one QTD
++		 * in the list, cause QTDs migth continue to be queued,
++		 * but during the activation it was only one queued.
++		 * Actually more than one QTD might be in the list if this function called
++		 * from XferCompletion - QTDs was queued during HW processing of the previous
++		 * descriptor chunk.
++		 */
++		idx = dwc_desclist_idx_dec(idx, inc * ((qh->ntd + 1) / 2), qh->dev_speed);
++	} else {
++		/*
++		 * Set the IOC for the latest descriptor
++		 * if either number of descriptor is not greather than threshold
++		 * or no more new descriptors activated.
++		 */
++		idx = dwc_desclist_idx_dec(qh->td_last, inc, qh->dev_speed);
++	}
++
++	qh->desc_list[idx].status.b_isoc.ioc = 1;
++#endif
++}
++
++static void init_non_isoc_dma_desc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++
++	dwc_hc_t *hc;
++	dwc_otg_host_dma_desc_t *dma_desc;
++	dwc_otg_qtd_t *qtd;
++	int num_packets, len, n_desc = 0;
++
++	hc = qh->channel;
++
++	/*
++	 * Start with hc->xfer_buff initialized in
++	 * assign_and_init_hc(), then if SG transfer consists of multiple URBs,
++	 * this pointer re-assigned to the buffer of the currently processed QTD.
++	 * For non-SG request there is always one QTD active.
++	 */
++
++	DWC_CIRCLEQ_FOREACH(qtd, &qh->qtd_list, qtd_list_entry) {
++
++		if (n_desc) {
++			/* SG request - more than 1 QTDs */
++			hc->xfer_buff = (uint8_t *)qtd->urb->dma + qtd->urb->actual_length;
++			hc->xfer_len = qtd->urb->length - qtd->urb->actual_length;
++		}
++
++		qtd->n_desc = 0;
++
++		do {
++			dma_desc = &qh->desc_list[n_desc];
++			len = hc->xfer_len;
++
++			if (len > MAX_DMA_DESC_SIZE)
++				len = MAX_DMA_DESC_SIZE - hc->max_packet + 1;
++
++			if (hc->ep_is_in) {
++				if (len > 0) {
++					num_packets = (len + hc->max_packet - 1) / hc->max_packet;
++				} else {
++					/* Need 1 packet for transfer length of 0. */
++					num_packets = 1;
++				}
++				/* Always program an integral # of max packets for IN transfers. */
++				len = num_packets * hc->max_packet;
++			}
++
++			dma_desc->status.b.n_bytes = len;
++
++			qh->n_bytes[n_desc] = len;
++
++			if ((qh->ep_type == UE_CONTROL)
++			    && (qtd->control_phase == DWC_OTG_CONTROL_SETUP))
++				dma_desc->status.b.sup = 1;	/* Setup Packet */
++
++			dma_desc->status.b.a = 1;	/* Active descriptor */
++			dma_desc->status.b.sts = 0;
++
++			dma_desc->buf =
++			    ((unsigned long)hc->xfer_buff & 0xffffffff);
++
++			/*
++			 * Last descriptor(or single) of IN transfer
++			 * with actual size less than MaxPacket.
++			 */
++			if (len > hc->xfer_len) {
++				hc->xfer_len = 0;
++			} else {
++				hc->xfer_buff += len;
++				hc->xfer_len -= len;
++			}
++
++			qtd->n_desc++;
++			n_desc++;
++		}
++		while ((hc->xfer_len > 0) && (n_desc != MAX_DMA_DESC_NUM_GENERIC));
++
++
++		qtd->in_process = 1;
++
++		if (qh->ep_type == UE_CONTROL)
++			break;
++
++		if (n_desc == MAX_DMA_DESC_NUM_GENERIC)
++			break;
++	}
++
++	if (n_desc) {
++		/* Request Transfer Complete interrupt for the last descriptor */
++		qh->desc_list[n_desc - 1].status.b.ioc = 1;
++		/* End of List indicator */
++		qh->desc_list[n_desc - 1].status.b.eol = 1;
++
++		hc->ntd = n_desc;
++	}
++}
++
++/**
++ * For Control and Bulk endpoints initializes descriptor list
++ * and starts the transfer.
++ *
++ * For Interrupt and Isochronous endpoints initializes descriptor list
++ * then updates FrameList, marking appropriate entries as active.
++ * In case of Isochronous, the starting descriptor index is calculated based
++ * on the scheduled frame, but only on the first transfer descriptor within a session.
++ * Then starts the transfer via enabling the channel.
++ * For Isochronous endpoint the channel is not halted on XferComplete
++ * interrupt so remains assigned to the endpoint(QH) until session is done.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh The QH to init.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++void dwc_otg_hcd_start_xfer_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	/* Channel is already assigned */
++	dwc_hc_t *hc = qh->channel;
++	uint8_t skip_frames = 0;
++
++	switch (hc->ep_type) {
++	case DWC_OTG_EP_TYPE_CONTROL:
++	case DWC_OTG_EP_TYPE_BULK:
++		init_non_isoc_dma_desc(hcd, qh);
++
++		dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc);
++		break;
++	case DWC_OTG_EP_TYPE_INTR:
++		init_non_isoc_dma_desc(hcd, qh);
++
++		update_frame_list(hcd, qh, 1);
++
++		dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc);
++		break;
++	case DWC_OTG_EP_TYPE_ISOC:
++
++		if (!qh->ntd)
++			skip_frames = recalc_initial_desc_idx(hcd, qh);
++
++		init_isoc_dma_desc(hcd, qh, skip_frames);
++
++		if (!hc->xfer_started) {
++
++			update_frame_list(hcd, qh, 1);
++
++			/*
++			 * Always set to max, instead of actual size.
++			 * Otherwise ntd will be changed with
++			 * channel being enabled. Not recommended.
++			 *
++			 */
++			hc->ntd = max_desc_num(qh);
++			/* Enable channel only once for ISOC */
++			dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc);
++		}
++
++		break;
++	default:
++
++		break;
++	}
++}
++
++static void complete_isoc_xfer_ddma(dwc_otg_hcd_t * hcd,
++				    dwc_hc_t * hc,
++				    dwc_otg_hc_regs_t * hc_regs,
++				    dwc_otg_halt_status_e halt_status)
++{
++	struct dwc_otg_hcd_iso_packet_desc *frame_desc;
++	dwc_otg_qtd_t *qtd, *qtd_tmp;
++	dwc_otg_qh_t *qh;
++	dwc_otg_host_dma_desc_t *dma_desc;
++	uint16_t idx, remain;
++	uint8_t urb_compl;
++
++	qh = hc->qh;
++	idx = qh->td_first;
++
++	if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) {
++		DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry)
++		    qtd->in_process = 0;
++		return;
++	} else if ((halt_status == DWC_OTG_HC_XFER_AHB_ERR) ||
++		   (halt_status == DWC_OTG_HC_XFER_BABBLE_ERR)) {
++		/*
++		 * Channel is halted in these error cases.
++		 * Considered as serious issues.
++		 * Complete all URBs marking all frames as failed,
++		 * irrespective whether some of the descriptors(frames) succeeded or no.
++		 * Pass error code to completion routine as well, to
++		 * update urb->status, some of class drivers might use it to stop
++		 * queing transfer requests.
++		 */
++		int err = (halt_status == DWC_OTG_HC_XFER_AHB_ERR)
++		    ? (-DWC_E_IO)
++		    : (-DWC_E_OVERFLOW);
++
++		DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) {
++			for (idx = 0; idx < qtd->urb->packet_count; idx++) {
++				frame_desc = &qtd->urb->iso_descs[idx];
++				frame_desc->status = err;
++			}
++			hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, err);
++			dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh);
++		}
++		return;
++	}
++
++	DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) {
++
++		if (!qtd->in_process)
++			break;
++
++		urb_compl = 0;
++
++		do {
++
++			dma_desc = &qh->desc_list[idx];
++
++			frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index];
++			remain = hc->ep_is_in ? dma_desc->status.b_isoc.n_bytes : 0;
++
++			if (dma_desc->status.b_isoc.sts == DMA_DESC_STS_PKTERR) {
++				/*
++				 * XactError or, unable to complete all the transactions
++				 * in the scheduled micro-frame/frame,
++				 * both indicated by DMA_DESC_STS_PKTERR.
++				 */
++				qtd->urb->error_count++;
++				frame_desc->actual_length = qh->n_bytes[idx] - remain;
++				frame_desc->status = -DWC_E_PROTOCOL;
++			} else {
++				/* Success */
++
++				frame_desc->actual_length = qh->n_bytes[idx] - remain;
++				frame_desc->status = 0;
++			}
++
++			if (++qtd->isoc_frame_index == qtd->urb->packet_count) {
++				/*
++				 * urb->status is not used for isoc transfers here.
++				 * The individual frame_desc status are used instead.
++				 */
++
++				hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0);
++				dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh);
++
++				/*
++				 * This check is necessary because urb_dequeue can be called
++				 * from urb complete callback(sound driver example).
++				 * All pending URBs are dequeued there, so no need for
++				 * further processing.
++				 */
++				if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) {
++					return;
++				}
++
++				urb_compl = 1;
++
++			}
++
++			qh->ntd--;
++
++			/* Stop if IOC requested descriptor reached */
++			if (dma_desc->status.b_isoc.ioc) {
++				idx = desclist_idx_inc(idx, qh->interval, hc->speed);
++				goto stop_scan;
++			}
++
++			idx = desclist_idx_inc(idx, qh->interval, hc->speed);
++
++			if (urb_compl)
++				break;
++		}
++		while (idx != qh->td_first);
++	}
++stop_scan:
++	qh->td_first = idx;
++}
++
++uint8_t update_non_isoc_urb_state_ddma(dwc_otg_hcd_t * hcd,
++				       dwc_hc_t * hc,
++				       dwc_otg_qtd_t * qtd,
++				       dwc_otg_host_dma_desc_t * dma_desc,
++				       dwc_otg_halt_status_e halt_status,
++				       uint32_t n_bytes, uint8_t * xfer_done)
++{
++
++	uint16_t remain = hc->ep_is_in ? dma_desc->status.b.n_bytes : 0;
++	dwc_otg_hcd_urb_t *urb = qtd->urb;
++
++	if (halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
++		urb->status = -DWC_E_IO;
++		return 1;
++	}
++	if (dma_desc->status.b.sts == DMA_DESC_STS_PKTERR) {
++		switch (halt_status) {
++		case DWC_OTG_HC_XFER_STALL:
++			urb->status = -DWC_E_PIPE;
++			break;
++		case DWC_OTG_HC_XFER_BABBLE_ERR:
++			urb->status = -DWC_E_OVERFLOW;
++			break;
++		case DWC_OTG_HC_XFER_XACT_ERR:
++			urb->status = -DWC_E_PROTOCOL;
++			break;
++		default:
++			DWC_ERROR("%s: Unhandled descriptor error status (%d)\n", __func__,
++				  halt_status);
++			break;
++		}
++		return 1;
++	}
++
++	if (dma_desc->status.b.a == 1) {
++		DWC_DEBUGPL(DBG_HCDV,
++			    "Active descriptor encountered on channel %d\n",
++			    hc->hc_num);
++		return 0;
++	}
++
++	if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL) {
++		if (qtd->control_phase == DWC_OTG_CONTROL_DATA) {
++			urb->actual_length += n_bytes - remain;
++			if (remain || urb->actual_length == urb->length) {
++				/*
++				 * For Control Data stage do not set urb->status=0 to prevent
++				 * URB callback. Set it when Status phase done. See below.
++				 */
++				*xfer_done = 1;
++			}
++
++		} else if (qtd->control_phase == DWC_OTG_CONTROL_STATUS) {
++			urb->status = 0;
++			*xfer_done = 1;
++		}
++		/* No handling for SETUP stage */
++	} else {
++		/* BULK and INTR */
++		urb->actual_length += n_bytes - remain;
++		if (remain || urb->actual_length == urb->length) {
++			urb->status = 0;
++			*xfer_done = 1;
++		}
++	}
++
++	return 0;
++}
++
++static void complete_non_isoc_xfer_ddma(dwc_otg_hcd_t * hcd,
++					dwc_hc_t * hc,
++					dwc_otg_hc_regs_t * hc_regs,
++					dwc_otg_halt_status_e halt_status)
++{
++	dwc_otg_hcd_urb_t *urb = NULL;
++	dwc_otg_qtd_t *qtd, *qtd_tmp;
++	dwc_otg_qh_t *qh;
++	dwc_otg_host_dma_desc_t *dma_desc;
++	uint32_t n_bytes, n_desc, i;
++	uint8_t failed = 0, xfer_done;
++
++	n_desc = 0;
++
++	qh = hc->qh;
++
++	if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) {
++		DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) {
++			qtd->in_process = 0;
++		}
++		return;
++	}
++
++	DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) {
++
++		urb = qtd->urb;
++
++		n_bytes = 0;
++		xfer_done = 0;
++
++		for (i = 0; i < qtd->n_desc; i++) {
++			dma_desc = &qh->desc_list[n_desc];
++
++			n_bytes = qh->n_bytes[n_desc];
++
++			failed =
++			    update_non_isoc_urb_state_ddma(hcd, hc, qtd,
++							   dma_desc,
++							   halt_status, n_bytes,
++							   &xfer_done);
++
++			if (failed
++			    || (xfer_done
++				&& (urb->status != -DWC_E_IN_PROGRESS))) {
++
++				hcd->fops->complete(hcd, urb->priv, urb,
++						    urb->status);
++				dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh);
++
++				if (failed)
++					goto stop_scan;
++			} else if (qh->ep_type == UE_CONTROL) {
++				if (qtd->control_phase == DWC_OTG_CONTROL_SETUP) {
++					if (urb->length > 0) {
++						qtd->control_phase = DWC_OTG_CONTROL_DATA;
++					} else {
++						qtd->control_phase = DWC_OTG_CONTROL_STATUS;
++					}
++					DWC_DEBUGPL(DBG_HCDV, "  Control setup transaction done\n");
++				} else if (qtd->control_phase == DWC_OTG_CONTROL_DATA) {
++					if (xfer_done) {
++						qtd->control_phase = DWC_OTG_CONTROL_STATUS;
++						DWC_DEBUGPL(DBG_HCDV, "  Control data transfer done\n");
++					} else if (i + 1 == qtd->n_desc) {
++						/*
++						 * Last descriptor for Control data stage which is
++						 * not completed yet.
++						 */
++						dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++					}
++				}
++			}
++
++			n_desc++;
++		}
++
++	}
++
++stop_scan:
++
++	if (qh->ep_type != UE_CONTROL) {
++		/*
++		 * Resetting the data toggle for bulk
++		 * and interrupt endpoints in case of stall. See handle_hc_stall_intr()
++		 */
++		if (halt_status == DWC_OTG_HC_XFER_STALL)
++			qh->data_toggle = DWC_OTG_HC_PID_DATA0;
++		else
++			dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++	}
++
++	if (halt_status == DWC_OTG_HC_XFER_COMPLETE) {
++		hcint_data_t hcint;
++		hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++		if (hcint.b.nyet) {
++			/*
++			 * Got a NYET on the last transaction of the transfer. It
++			 * means that the endpoint should be in the PING state at the
++			 * beginning of the next transfer.
++			 */
++			qh->ping_state = 1;
++			clear_hc_int(hc_regs, nyet);
++		}
++
++	}
++
++}
++
++/**
++ * This function is called from interrupt handlers.
++ * Scans the descriptor list, updates URB's status and
++ * calls completion routine for the URB if it's done.
++ * Releases the channel to be used by other transfers.
++ * In case of Isochronous endpoint the channel is not halted until
++ * the end of the session, i.e. QTD list is empty.
++ * If periodic channel released the FrameList is updated accordingly.
++ *
++ * Calls transaction selection routines to activate pending transfers.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param hc Host channel, the transfer is completed on.
++ * @param hc_regs Host channel registers.
++ * @param halt_status Reason the channel is being halted,
++ *		      or just XferComplete for isochronous transfer
++ */
++void dwc_otg_hcd_complete_xfer_ddma(dwc_otg_hcd_t * hcd,
++				    dwc_hc_t * hc,
++				    dwc_otg_hc_regs_t * hc_regs,
++				    dwc_otg_halt_status_e halt_status)
++{
++	uint8_t continue_isoc_xfer = 0;
++	dwc_otg_transaction_type_e tr_type;
++	dwc_otg_qh_t *qh = hc->qh;
++
++	if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++
++		complete_isoc_xfer_ddma(hcd, hc, hc_regs, halt_status);
++
++		/* Release the channel if halted or session completed */
++		if (halt_status != DWC_OTG_HC_XFER_COMPLETE ||
++		    DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) {
++
++			/* Halt the channel if session completed */
++			if (halt_status == DWC_OTG_HC_XFER_COMPLETE) {
++				dwc_otg_hc_halt(hcd->core_if, hc, halt_status);
++			}
++
++			release_channel_ddma(hcd, qh);
++			dwc_otg_hcd_qh_remove(hcd, qh);
++		} else {
++			/* Keep in assigned schedule to continue transfer */
++			DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned,
++					   &qh->qh_list_entry);
++			continue_isoc_xfer = 1;
++
++		}
++		/** @todo Consider the case when period exceeds FrameList size.
++		 *  Frame Rollover interrupt should be used.
++		 */
++	} else {
++		/* Scan descriptor list to complete the URB(s), then release the channel */
++		complete_non_isoc_xfer_ddma(hcd, hc, hc_regs, halt_status);
++
++		release_channel_ddma(hcd, qh);
++		dwc_otg_hcd_qh_remove(hcd, qh);
++
++		if (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) {
++			/* Add back to inactive non-periodic schedule on normal completion */
++			dwc_otg_hcd_qh_add(hcd, qh);
++		}
++
++	}
++	tr_type = dwc_otg_hcd_select_transactions(hcd);
++	if (tr_type != DWC_OTG_TRANSACTION_NONE || continue_isoc_xfer) {
++		if (continue_isoc_xfer) {
++			if (tr_type == DWC_OTG_TRANSACTION_NONE) {
++				tr_type = DWC_OTG_TRANSACTION_PERIODIC;
++			} else if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC) {
++				tr_type = DWC_OTG_TRANSACTION_ALL;
++			}
++		}
++		dwc_otg_hcd_queue_transactions(hcd, tr_type);
++	}
++}
++
++#endif /* DWC_DEVICE_ONLY */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_hcd.h linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_hcd.h
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_hcd.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_hcd.h	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,851 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.h $
++ * $Revision: #58 $
++ * $Date: 2011/09/15 $
++ * $Change: 1846647 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++#ifndef __DWC_HCD_H__
++#define __DWC_HCD_H__
++
++#include "dwc_otg_os_dep.h"
++#include "usb.h"
++#include "dwc_otg_hcd_if.h"
++#include "dwc_otg_core_if.h"
++#include "dwc_list.h"
++#include "dwc_otg_cil.h"
++
++/**
++ * @file
++ *
++ * This file contains the structures, constants, and interfaces for
++ * the Host Contoller Driver (HCD).
++ *
++ * The Host Controller Driver (HCD) is responsible for translating requests
++ * from the USB Driver into the appropriate actions on the DWC_otg controller.
++ * It isolates the USBD from the specifics of the controller by providing an
++ * API to the USBD.
++ */
++
++struct dwc_otg_hcd_pipe_info {
++	uint8_t dev_addr;
++	uint8_t ep_num;
++	uint8_t pipe_type;
++	uint8_t pipe_dir;
++	uint16_t mps;
++};
++
++struct dwc_otg_hcd_iso_packet_desc {
++	uint32_t offset;
++	uint32_t length;
++	uint32_t actual_length;
++	uint32_t status;
++};
++
++struct dwc_otg_qtd;
++
++struct dwc_otg_hcd_urb {
++	void *priv;
++	struct dwc_otg_qtd *qtd;
++	void *buf;
++	dwc_dma_t dma;
++	void *setup_packet;
++	dwc_dma_t setup_dma;
++	uint32_t length;
++	uint32_t actual_length;
++	uint32_t status;
++	uint32_t error_count;
++	uint32_t packet_count;
++	uint32_t flags;
++	uint16_t interval;
++	struct dwc_otg_hcd_pipe_info pipe_info;
++	struct dwc_otg_hcd_iso_packet_desc iso_descs[0];
++};
++
++static inline uint8_t dwc_otg_hcd_get_ep_num(struct dwc_otg_hcd_pipe_info *pipe)
++{
++	return pipe->ep_num;
++}
++
++static inline uint8_t dwc_otg_hcd_get_pipe_type(struct dwc_otg_hcd_pipe_info
++						*pipe)
++{
++	return pipe->pipe_type;
++}
++
++static inline uint16_t dwc_otg_hcd_get_mps(struct dwc_otg_hcd_pipe_info *pipe)
++{
++	return pipe->mps;
++}
++
++static inline uint8_t dwc_otg_hcd_get_dev_addr(struct dwc_otg_hcd_pipe_info
++					       *pipe)
++{
++	return pipe->dev_addr;
++}
++
++static inline uint8_t dwc_otg_hcd_is_pipe_isoc(struct dwc_otg_hcd_pipe_info
++					       *pipe)
++{
++	return (pipe->pipe_type == UE_ISOCHRONOUS);
++}
++
++static inline uint8_t dwc_otg_hcd_is_pipe_int(struct dwc_otg_hcd_pipe_info
++					      *pipe)
++{
++	return (pipe->pipe_type == UE_INTERRUPT);
++}
++
++static inline uint8_t dwc_otg_hcd_is_pipe_bulk(struct dwc_otg_hcd_pipe_info
++					       *pipe)
++{
++	return (pipe->pipe_type == UE_BULK);
++}
++
++static inline uint8_t dwc_otg_hcd_is_pipe_control(struct dwc_otg_hcd_pipe_info
++						  *pipe)
++{
++	return (pipe->pipe_type == UE_CONTROL);
++}
++
++static inline uint8_t dwc_otg_hcd_is_pipe_in(struct dwc_otg_hcd_pipe_info *pipe)
++{
++	return (pipe->pipe_dir == UE_DIR_IN);
++}
++
++static inline uint8_t dwc_otg_hcd_is_pipe_out(struct dwc_otg_hcd_pipe_info
++					      *pipe)
++{
++	return (!dwc_otg_hcd_is_pipe_in(pipe));
++}
++
++static inline void dwc_otg_hcd_fill_pipe(struct dwc_otg_hcd_pipe_info *pipe,
++					 uint8_t devaddr, uint8_t ep_num,
++					 uint8_t pipe_type, uint8_t pipe_dir,
++					 uint16_t mps)
++{
++	pipe->dev_addr = devaddr;
++	pipe->ep_num = ep_num;
++	pipe->pipe_type = pipe_type;
++	pipe->pipe_dir = pipe_dir;
++	pipe->mps = mps;
++}
++
++/**
++ * Phases for control transfers.
++ */
++typedef enum dwc_otg_control_phase {
++	DWC_OTG_CONTROL_SETUP,
++	DWC_OTG_CONTROL_DATA,
++	DWC_OTG_CONTROL_STATUS
++} dwc_otg_control_phase_e;
++
++/** Transaction types. */
++typedef enum dwc_otg_transaction_type {
++	DWC_OTG_TRANSACTION_NONE          = 0,
++	DWC_OTG_TRANSACTION_PERIODIC      = 1,
++	DWC_OTG_TRANSACTION_NON_PERIODIC  = 2,
++	DWC_OTG_TRANSACTION_ALL           = DWC_OTG_TRANSACTION_PERIODIC + DWC_OTG_TRANSACTION_NON_PERIODIC
++} dwc_otg_transaction_type_e;
++
++struct dwc_otg_qh;
++
++/**
++ * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control,
++ * interrupt, or isochronous transfer. A single QTD is created for each URB
++ * (of one of these types) submitted to the HCD. The transfer associated with
++ * a QTD may require one or multiple transactions.
++ *
++ * A QTD is linked to a Queue Head, which is entered in either the
++ * non-periodic or periodic schedule for execution. When a QTD is chosen for
++ * execution, some or all of its transactions may be executed. After
++ * execution, the state of the QTD is updated. The QTD may be retired if all
++ * its transactions are complete or if an error occurred. Otherwise, it
++ * remains in the schedule so more transactions can be executed later.
++ */
++typedef struct dwc_otg_qtd {
++	/**
++	 * Determines the PID of the next data packet for the data phase of
++	 * control transfers. Ignored for other transfer types.<br>
++	 * One of the following values:
++	 *	- DWC_OTG_HC_PID_DATA0
++	 *	- DWC_OTG_HC_PID_DATA1
++	 */
++	uint8_t data_toggle;
++
++	/** Current phase for control transfers (Setup, Data, or Status). */
++	dwc_otg_control_phase_e control_phase;
++
++	/** Keep track of the current split type
++	 * for FS/LS endpoints on a HS Hub */
++	uint8_t complete_split;
++
++	/** How many bytes transferred during SSPLIT OUT */
++	uint32_t ssplit_out_xfer_count;
++
++	/**
++	 * Holds the number of bus errors that have occurred for a transaction
++	 * within this transfer.
++	 */
++	uint8_t error_count;
++
++	/**
++	 * Index of the next frame descriptor for an isochronous transfer. A
++	 * frame descriptor describes the buffer position and length of the
++	 * data to be transferred in the next scheduled (micro)frame of an
++	 * isochronous transfer. It also holds status for that transaction.
++	 * The frame index starts at 0.
++	 */
++	uint16_t isoc_frame_index;
++
++	/** Position of the ISOC split on full/low speed */
++	uint8_t isoc_split_pos;
++
++	/** Position of the ISOC split in the buffer for the current frame */
++	uint16_t isoc_split_offset;
++
++	/** URB for this transfer */
++	struct dwc_otg_hcd_urb *urb;
++
++	struct dwc_otg_qh *qh;
++
++	/** This list of QTDs */
++	 DWC_CIRCLEQ_ENTRY(dwc_otg_qtd) qtd_list_entry;
++
++	/** Indicates if this QTD is currently processed by HW. */
++	uint8_t in_process;
++
++	/** Number of DMA descriptors for this QTD */
++	uint8_t n_desc;
++
++	/**
++	 * Last activated frame(packet) index.
++	 * Used in Descriptor DMA mode only.
++	 */
++	uint16_t isoc_frame_index_last;
++
++} dwc_otg_qtd_t;
++
++DWC_CIRCLEQ_HEAD(dwc_otg_qtd_list, dwc_otg_qtd);
++
++/**
++ * A Queue Head (QH) holds the static characteristics of an endpoint and
++ * maintains a list of transfers (QTDs) for that endpoint. A QH structure may
++ * be entered in either the non-periodic or periodic schedule.
++ */
++typedef struct dwc_otg_qh {
++	/**
++	 * Endpoint type.
++	 * One of the following values:
++	 *	- UE_CONTROL
++	 *	- UE_BULK
++	 *	- UE_INTERRUPT
++	 *	- UE_ISOCHRONOUS
++	 */
++	uint8_t ep_type;
++	uint8_t ep_is_in;
++
++	/** wMaxPacketSize Field of Endpoint Descriptor. */
++	uint16_t maxp;
++
++	/**
++	 * Device speed.
++	 * One of the following values:
++	 *	- DWC_OTG_EP_SPEED_LOW
++	 *	- DWC_OTG_EP_SPEED_FULL
++	 *	- DWC_OTG_EP_SPEED_HIGH
++	 */
++	uint8_t dev_speed;
++
++	/**
++	 * Determines the PID of the next data packet for non-control
++	 * transfers. Ignored for control transfers.<br>
++	 * One of the following values:
++	 *	- DWC_OTG_HC_PID_DATA0
++	 *	- DWC_OTG_HC_PID_DATA1
++	 */
++	uint8_t data_toggle;
++
++	/** Ping state if 1. */
++	uint8_t ping_state;
++
++	/**
++	 * List of QTDs for this QH.
++	 */
++	struct dwc_otg_qtd_list qtd_list;
++
++	/** Host channel currently processing transfers for this QH. */
++	struct dwc_hc *channel;
++
++	/** Full/low speed endpoint on high-speed hub requires split. */
++	uint8_t do_split;
++
++	/** @name Periodic schedule information */
++	/** @{ */
++
++	/** Bandwidth in microseconds per (micro)frame. */
++	uint16_t usecs;
++
++	/** Interval between transfers in (micro)frames. */
++	uint16_t interval;
++
++	/**
++	 * (micro)frame to initialize a periodic transfer. The transfer
++	 * executes in the following (micro)frame.
++	 */
++	uint16_t sched_frame;
++
++	/*
++	** Frame a NAK was received on this queue head, used to minimise NAK retransmission
++	*/
++	uint16_t nak_frame;
++
++	/** (micro)frame at which last start split was initialized. */
++	uint16_t start_split_frame;
++
++	/** @} */
++
++	/**
++	 * Used instead of original buffer if
++	 * it(physical address) is not dword-aligned.
++	 */
++	uint8_t *dw_align_buf;
++	dwc_dma_t dw_align_buf_dma;
++
++	/** Entry for QH in either the periodic or non-periodic schedule. */
++	dwc_list_link_t qh_list_entry;
++
++	/** @name Descriptor DMA support */
++	/** @{ */
++
++	/** Descriptor List. */
++	dwc_otg_host_dma_desc_t *desc_list;
++
++	/** Descriptor List physical address. */
++	dwc_dma_t desc_list_dma;
++
++	/**
++	 * Xfer Bytes array.
++	 * Each element corresponds to a descriptor and indicates
++	 * original XferSize size value for the descriptor.
++	 */
++	uint32_t *n_bytes;
++
++	/** Actual number of transfer descriptors in a list. */
++	uint16_t ntd;
++
++	/** First activated isochronous transfer descriptor index. */
++	uint8_t td_first;
++	/** Last activated isochronous transfer descriptor index. */
++	uint8_t td_last;
++
++	/** @} */
++
++
++	uint16_t speed;
++	uint16_t frame_usecs[8];
++
++	uint32_t skip_count;
++} dwc_otg_qh_t;
++
++DWC_CIRCLEQ_HEAD(hc_list, dwc_hc);
++
++typedef struct urb_tq_entry {
++	struct urb *urb;
++	DWC_TAILQ_ENTRY(urb_tq_entry) urb_tq_entries;
++} urb_tq_entry_t;
++
++DWC_TAILQ_HEAD(urb_list, urb_tq_entry);
++
++/**
++ * This structure holds the state of the HCD, including the non-periodic and
++ * periodic schedules.
++ */
++struct dwc_otg_hcd {
++	/** The DWC otg device pointer */
++	struct dwc_otg_device *otg_dev;
++	/** DWC OTG Core Interface Layer */
++	dwc_otg_core_if_t *core_if;
++
++	/** Function HCD driver callbacks */
++	struct dwc_otg_hcd_function_ops *fops;
++
++	/** Internal DWC HCD Flags */
++	volatile union dwc_otg_hcd_internal_flags {
++		uint32_t d32;
++		struct {
++			unsigned port_connect_status_change:1;
++			unsigned port_connect_status:1;
++			unsigned port_reset_change:1;
++			unsigned port_enable_change:1;
++			unsigned port_suspend_change:1;
++			unsigned port_over_current_change:1;
++			unsigned port_l1_change:1;
++			unsigned reserved:26;
++		} b;
++	} flags;
++
++	/**
++	 * Inactive items in the non-periodic schedule. This is a list of
++	 * Queue Heads. Transfers associated with these Queue Heads are not
++	 * currently assigned to a host channel.
++	 */
++	dwc_list_link_t non_periodic_sched_inactive;
++
++	/**
++	 * Active items in the non-periodic schedule. This is a list of
++	 * Queue Heads. Transfers associated with these Queue Heads are
++	 * currently assigned to a host channel.
++	 */
++	dwc_list_link_t non_periodic_sched_active;
++
++	/**
++	 * Pointer to the next Queue Head to process in the active
++	 * non-periodic schedule.
++	 */
++	dwc_list_link_t *non_periodic_qh_ptr;
++
++	/**
++	 * Inactive items in the periodic schedule. This is a list of QHs for
++	 * periodic transfers that are _not_ scheduled for the next frame.
++	 * Each QH in the list has an interval counter that determines when it
++	 * needs to be scheduled for execution. This scheduling mechanism
++	 * allows only a simple calculation for periodic bandwidth used (i.e.
++	 * must assume that all periodic transfers may need to execute in the
++	 * same frame). However, it greatly simplifies scheduling and should
++	 * be sufficient for the vast majority of OTG hosts, which need to
++	 * connect to a small number of peripherals at one time.
++	 *
++	 * Items move from this list to periodic_sched_ready when the QH
++	 * interval counter is 0 at SOF.
++	 */
++	dwc_list_link_t periodic_sched_inactive;
++
++	/**
++	 * List of periodic QHs that are ready for execution in the next
++	 * frame, but have not yet been assigned to host channels.
++	 *
++	 * Items move from this list to periodic_sched_assigned as host
++	 * channels become available during the current frame.
++	 */
++	dwc_list_link_t periodic_sched_ready;
++
++	/**
++	 * List of periodic QHs to be executed in the next frame that are
++	 * assigned to host channels.
++	 *
++	 * Items move from this list to periodic_sched_queued as the
++	 * transactions for the QH are queued to the DWC_otg controller.
++	 */
++	dwc_list_link_t periodic_sched_assigned;
++
++	/**
++	 * List of periodic QHs that have been queued for execution.
++	 *
++	 * Items move from this list to either periodic_sched_inactive or
++	 * periodic_sched_ready when the channel associated with the transfer
++	 * is released. If the interval for the QH is 1, the item moves to
++	 * periodic_sched_ready because it must be rescheduled for the next
++	 * frame. Otherwise, the item moves to periodic_sched_inactive.
++	 */
++	dwc_list_link_t periodic_sched_queued;
++
++	/**
++	 * Total bandwidth claimed so far for periodic transfers. This value
++	 * is in microseconds per (micro)frame. The assumption is that all
++	 * periodic transfers may occur in the same (micro)frame.
++	 */
++	uint16_t periodic_usecs;
++
++	/**
++	 * Total bandwidth claimed so far for all periodic transfers
++	 * in a frame.
++	 * This will include a mixture of HS and FS transfers.
++	 * Units are microseconds per (micro)frame.
++	 * We have a budget per frame and have to schedule
++	 * transactions accordingly.
++	 * Watch out for the fact that things are actually scheduled for the
++	 * "next frame".
++	 */
++	uint16_t                frame_usecs[8];
++
++
++	/**
++	 * Frame number read from the core at SOF. The value ranges from 0 to
++	 * DWC_HFNUM_MAX_FRNUM.
++	 */
++	uint16_t frame_number;
++
++	/**
++	 * Count of periodic QHs, if using several eps. For SOF enable/disable.
++	 */
++	uint16_t periodic_qh_count;
++
++	/**
++	 * Free host channels in the controller. This is a list of
++	 * dwc_hc_t items.
++	 */
++	struct hc_list free_hc_list;
++	/**
++	 * Number of host channels assigned to periodic transfers. Currently
++	 * assuming that there is a dedicated host channel for each periodic
++	 * transaction and at least one host channel available for
++	 * non-periodic transactions.
++	 */
++	int periodic_channels; /* microframe_schedule==0 */
++
++	/**
++	 * Number of host channels assigned to non-periodic transfers.
++	 */
++	int non_periodic_channels; /* microframe_schedule==0 */
++
++	/**
++	 * Number of host channels assigned to non-periodic transfers.
++	 */
++	int available_host_channels;
++
++	/**
++	 * Array of pointers to the host channel descriptors. Allows accessing
++	 * a host channel descriptor given the host channel number. This is
++	 * useful in interrupt handlers.
++	 */
++	struct dwc_hc *hc_ptr_array[MAX_EPS_CHANNELS];
++
++	/**
++	 * Buffer to use for any data received during the status phase of a
++	 * control transfer. Normally no data is transferred during the status
++	 * phase. This buffer is used as a bit bucket.
++	 */
++	uint8_t *status_buf;
++
++	/**
++	 * DMA address for status_buf.
++	 */
++	dma_addr_t status_buf_dma;
++#define DWC_OTG_HCD_STATUS_BUF_SIZE 64
++
++	/**
++	 * Connection timer. An OTG host must display a message if the device
++	 * does not connect. Started when the VBus power is turned on via
++	 * sysfs attribute "buspower".
++	 */
++	dwc_timer_t *conn_timer;
++
++	/* Tasket to do a reset */
++	dwc_tasklet_t *reset_tasklet;
++
++	dwc_tasklet_t *completion_tasklet;
++	struct urb_list completed_urb_list;
++
++	/*  */
++	dwc_spinlock_t *lock;
++	dwc_spinlock_t *channel_lock;
++	/**
++	 * Private data that could be used by OS wrapper.
++	 */
++	void *priv;
++
++	uint8_t otg_port;
++
++	/** Frame List */
++	uint32_t *frame_list;
++
++	/** Hub - Port assignment */
++	int hub_port[128];
++#ifdef FIQ_DEBUG
++	int hub_port_alloc[2048];
++#endif
++
++	/** Frame List DMA address */
++	dma_addr_t frame_list_dma;
++
++#ifdef DEBUG
++	uint32_t frrem_samples;
++	uint64_t frrem_accum;
++
++	uint32_t hfnum_7_samples_a;
++	uint64_t hfnum_7_frrem_accum_a;
++	uint32_t hfnum_0_samples_a;
++	uint64_t hfnum_0_frrem_accum_a;
++	uint32_t hfnum_other_samples_a;
++	uint64_t hfnum_other_frrem_accum_a;
++
++	uint32_t hfnum_7_samples_b;
++	uint64_t hfnum_7_frrem_accum_b;
++	uint32_t hfnum_0_samples_b;
++	uint64_t hfnum_0_frrem_accum_b;
++	uint32_t hfnum_other_samples_b;
++	uint64_t hfnum_other_frrem_accum_b;
++#endif
++};
++
++/** @name Transaction Execution Functions */
++/** @{ */
++extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t
++								  * hcd);
++extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t * hcd,
++					   dwc_otg_transaction_type_e tr_type);
++
++int dwc_otg_hcd_allocate_port(dwc_otg_hcd_t * hcd, dwc_otg_qh_t *qh);
++void dwc_otg_hcd_release_port(dwc_otg_hcd_t * dwc_otg_hcd, dwc_otg_qh_t *qh);
++
++
++/** @} */
++
++/** @name Interrupt Handler Functions */
++/** @{ */
++extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t * dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t *
++							 dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t *
++							dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t *
++							   dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dwc_otg_hcd_t *
++							   dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t * dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr(dwc_otg_hcd_t *
++							     dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_disconnect_intr(dwc_otg_hcd_t * dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t * dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t * dwc_otg_hcd,
++					    uint32_t num);
++extern int32_t dwc_otg_hcd_handle_session_req_intr(dwc_otg_hcd_t * dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr(dwc_otg_hcd_t *
++						       dwc_otg_hcd);
++/** @} */
++
++/** @name Schedule Queue Functions */
++/** @{ */
++
++/* Implemented in dwc_otg_hcd_queue.c */
++extern dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t * hcd,
++					   dwc_otg_hcd_urb_t * urb, int atomic_alloc);
++extern void dwc_otg_hcd_qh_free(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
++extern int dwc_otg_hcd_qh_add(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
++extern void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
++extern void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh,
++				      int sched_csplit);
++
++/** Remove and free a QH */
++static inline void dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd_t * hcd,
++						  dwc_otg_qh_t * qh)
++{
++	dwc_irqflags_t flags;
++	DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
++	dwc_otg_hcd_qh_remove(hcd, qh);
++	DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
++	dwc_otg_hcd_qh_free(hcd, qh);
++}
++
++/** Allocates memory for a QH structure.
++ * @return Returns the memory allocate or NULL on error. */
++static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc(int atomic_alloc)
++{
++	if (atomic_alloc)
++		return (dwc_otg_qh_t *) DWC_ALLOC_ATOMIC(sizeof(dwc_otg_qh_t));
++	else
++		return (dwc_otg_qh_t *) DWC_ALLOC(sizeof(dwc_otg_qh_t));
++}
++
++extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(dwc_otg_hcd_urb_t * urb,
++					     int atomic_alloc);
++extern void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t * qtd, dwc_otg_hcd_urb_t * urb);
++extern int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * qtd, dwc_otg_hcd_t * dwc_otg_hcd,
++			       dwc_otg_qh_t ** qh, int atomic_alloc);
++
++/** Allocates memory for a QTD structure.
++ * @return Returns the memory allocate or NULL on error. */
++static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc(int atomic_alloc)
++{
++	if (atomic_alloc)
++		return (dwc_otg_qtd_t *) DWC_ALLOC_ATOMIC(sizeof(dwc_otg_qtd_t));
++	else
++		return (dwc_otg_qtd_t *) DWC_ALLOC(sizeof(dwc_otg_qtd_t));
++}
++
++/** Frees the memory for a QTD structure.  QTD should already be removed from
++ * list.
++ * @param qtd QTD to free.*/
++static inline void dwc_otg_hcd_qtd_free(dwc_otg_qtd_t * qtd)
++{
++	DWC_FREE(qtd);
++}
++
++/** Removes a QTD from list.
++ * @param hcd HCD instance.
++ * @param qtd QTD to remove from list.
++ * @param qh QTD belongs to.
++ */
++static inline void dwc_otg_hcd_qtd_remove(dwc_otg_hcd_t * hcd,
++					  dwc_otg_qtd_t * qtd,
++					  dwc_otg_qh_t * qh)
++{
++	DWC_CIRCLEQ_REMOVE(&qh->qtd_list, qtd, qtd_list_entry);
++}
++
++/** Remove and free a QTD
++  * Need to disable IRQ and hold hcd lock while calling this function out of
++  * interrupt servicing chain */
++static inline void dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd_t * hcd,
++						   dwc_otg_qtd_t * qtd,
++						   dwc_otg_qh_t * qh)
++{
++	dwc_otg_hcd_qtd_remove(hcd, qtd, qh);
++	dwc_otg_hcd_qtd_free(qtd);
++}
++
++/** @} */
++
++/** @name Descriptor DMA Supporting Functions */
++/** @{ */
++
++extern void dwc_otg_hcd_start_xfer_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
++extern void dwc_otg_hcd_complete_xfer_ddma(dwc_otg_hcd_t * hcd,
++					   dwc_hc_t * hc,
++					   dwc_otg_hc_regs_t * hc_regs,
++					   dwc_otg_halt_status_e halt_status);
++
++extern int dwc_otg_hcd_qh_init_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
++extern void dwc_otg_hcd_qh_free_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
++
++/** @} */
++
++/** @name Internal Functions */
++/** @{ */
++dwc_otg_qh_t *dwc_urb_to_qh(dwc_otg_hcd_urb_t * urb);
++/** @} */
++
++#ifdef CONFIG_USB_DWC_OTG_LPM
++extern int dwc_otg_hcd_get_hc_for_lpm_tran(dwc_otg_hcd_t * hcd,
++					   uint8_t devaddr);
++extern void dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd_t * hcd);
++#endif
++
++/** Gets the QH that contains the list_head */
++#define dwc_list_to_qh(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qh_t, qh_list_entry)
++
++/** Gets the QTD that contains the list_head */
++#define dwc_list_to_qtd(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qtd_t, qtd_list_entry)
++
++/** Check if QH is non-periodic  */
++#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == UE_BULK) || \
++				     (_qh_ptr_->ep_type == UE_CONTROL))
++
++/** High bandwidth multiplier as encoded in highspeed endpoint descriptors */
++#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
++
++/** Packet size for any kind of endpoint descriptor */
++#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
++
++/**
++ * Returns true if _frame1 is less than or equal to _frame2. The comparison is
++ * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the
++ * frame number when the max frame number is reached.
++ */
++static inline int dwc_frame_num_le(uint16_t frame1, uint16_t frame2)
++{
++	return ((frame2 - frame1) & DWC_HFNUM_MAX_FRNUM) <=
++	    (DWC_HFNUM_MAX_FRNUM >> 1);
++}
++
++/**
++ * Returns true if _frame1 is greater than _frame2. The comparison is done
++ * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the frame
++ * number when the max frame number is reached.
++ */
++static inline int dwc_frame_num_gt(uint16_t frame1, uint16_t frame2)
++{
++	return (frame1 != frame2) &&
++	    (((frame1 - frame2) & DWC_HFNUM_MAX_FRNUM) <
++	     (DWC_HFNUM_MAX_FRNUM >> 1));
++}
++
++/**
++ * Increments _frame by the amount specified by _inc. The addition is done
++ * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value.
++ */
++static inline uint16_t dwc_frame_num_inc(uint16_t frame, uint16_t inc)
++{
++	return (frame + inc) & DWC_HFNUM_MAX_FRNUM;
++}
++
++static inline uint16_t dwc_full_frame_num(uint16_t frame)
++{
++	return (frame & DWC_HFNUM_MAX_FRNUM) >> 3;
++}
++
++static inline uint16_t dwc_micro_frame_num(uint16_t frame)
++{
++	return frame & 0x7;
++}
++
++void dwc_otg_hcd_save_data_toggle(dwc_hc_t * hc,
++				  dwc_otg_hc_regs_t * hc_regs,
++				  dwc_otg_qtd_t * qtd);
++
++#ifdef DEBUG
++/**
++ * Macro to sample the remaining PHY clocks left in the current frame. This
++ * may be used during debugging to determine the average time it takes to
++ * execute sections of code. There are two possible sample points, "a" and
++ * "b", so the _letter argument must be one of these values.
++ *
++ * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For
++ * example, "cat /sys/devices/lm0/hcd_frrem".
++ */
++#define dwc_sample_frrem(_hcd, _qh, _letter) \
++{ \
++	hfnum_data_t hfnum; \
++	dwc_otg_qtd_t *qtd; \
++	qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); \
++	if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_frame != 0 && !qtd->complete_split) { \
++		hfnum.d32 = DWC_READ_REG32(&_hcd->core_if->host_if->host_global_regs->hfnum); \
++		switch (hfnum.b.frnum & 0x7) { \
++		case 7: \
++			_hcd->hfnum_7_samples_##_letter++; \
++			_hcd->hfnum_7_frrem_accum_##_letter += hfnum.b.frrem; \
++			break; \
++		case 0: \
++			_hcd->hfnum_0_samples_##_letter++; \
++			_hcd->hfnum_0_frrem_accum_##_letter += hfnum.b.frrem; \
++			break; \
++		default: \
++			_hcd->hfnum_other_samples_##_letter++; \
++			_hcd->hfnum_other_frrem_accum_##_letter += hfnum.b.frrem; \
++			break; \
++		} \
++	} \
++}
++#else
++#define dwc_sample_frrem(_hcd, _qh, _letter)
++#endif
++#endif
++#endif /* DWC_DEVICE_ONLY */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,417 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_if.h $
++ * $Revision: #12 $
++ * $Date: 2011/10/26 $
++ * $Change: 1873028 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++#ifndef __DWC_HCD_IF_H__
++#define __DWC_HCD_IF_H__
++
++#include "dwc_otg_core_if.h"
++
++/** @file
++ * This file defines DWC_OTG HCD Core API.
++ */
++
++struct dwc_otg_hcd;
++typedef struct dwc_otg_hcd dwc_otg_hcd_t;
++
++struct dwc_otg_hcd_urb;
++typedef struct dwc_otg_hcd_urb dwc_otg_hcd_urb_t;
++
++/** @name HCD Function Driver Callbacks */
++/** @{ */
++
++/** This function is called whenever core switches to host mode. */
++typedef int (*dwc_otg_hcd_start_cb_t) (dwc_otg_hcd_t * hcd);
++
++/** This function is called when device has been disconnected */
++typedef int (*dwc_otg_hcd_disconnect_cb_t) (dwc_otg_hcd_t * hcd);
++
++/** Wrapper provides this function to HCD to core, so it can get hub information to which device is connected */
++typedef int (*dwc_otg_hcd_hub_info_from_urb_cb_t) (dwc_otg_hcd_t * hcd,
++						   void *urb_handle,
++						   uint32_t * hub_addr,
++						   uint32_t * port_addr);
++/** Via this function HCD core gets device speed */
++typedef int (*dwc_otg_hcd_speed_from_urb_cb_t) (dwc_otg_hcd_t * hcd,
++						void *urb_handle);
++
++/** This function is called when urb is completed */
++typedef int (*dwc_otg_hcd_complete_urb_cb_t) (dwc_otg_hcd_t * hcd,
++					      void *urb_handle,
++					      dwc_otg_hcd_urb_t * dwc_otg_urb,
++					      int32_t status);
++
++/** Via this function HCD core gets b_hnp_enable parameter */
++typedef int (*dwc_otg_hcd_get_b_hnp_enable) (dwc_otg_hcd_t * hcd);
++
++struct dwc_otg_hcd_function_ops {
++	dwc_otg_hcd_start_cb_t start;
++	dwc_otg_hcd_disconnect_cb_t disconnect;
++	dwc_otg_hcd_hub_info_from_urb_cb_t hub_info;
++	dwc_otg_hcd_speed_from_urb_cb_t speed;
++	dwc_otg_hcd_complete_urb_cb_t complete;
++	dwc_otg_hcd_get_b_hnp_enable get_b_hnp_enable;
++};
++/** @} */
++
++/** @name HCD Core API */
++/** @{ */
++/** This function allocates dwc_otg_hcd structure and returns pointer on it. */
++extern dwc_otg_hcd_t *dwc_otg_hcd_alloc_hcd(void);
++
++/** This function should be called to initiate HCD Core.
++ *
++ * @param hcd The HCD
++ * @param core_if The DWC_OTG Core
++ *
++ * Returns -DWC_E_NO_MEMORY if no enough memory.
++ * Returns 0 on success
++ */
++extern int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd, dwc_otg_core_if_t * core_if);
++
++/** Frees HCD
++ *
++ * @param hcd The HCD
++ */
++extern void dwc_otg_hcd_remove(dwc_otg_hcd_t * hcd);
++
++/** This function should be called on every hardware interrupt.
++ *
++ * @param dwc_otg_hcd The HCD
++ *
++ * Returns non zero if interrupt is handled
++ * Return 0 if interrupt is not handled
++ */
++extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd);
++
++/** This function is used to handle the fast interrupt
++ *
++ */
++extern void __attribute__ ((naked)) dwc_otg_hcd_handle_fiq(void);
++
++/**
++ * Returns private data set by
++ * dwc_otg_hcd_set_priv_data function.
++ *
++ * @param hcd The HCD
++ */
++extern void *dwc_otg_hcd_get_priv_data(dwc_otg_hcd_t * hcd);
++
++/**
++ * Set private data.
++ *
++ * @param hcd The HCD
++ * @param priv_data pointer to be stored in private data
++ */
++extern void dwc_otg_hcd_set_priv_data(dwc_otg_hcd_t * hcd, void *priv_data);
++
++/**
++ * This function initializes the HCD Core.
++ *
++ * @param hcd The HCD
++ * @param fops The Function Driver Operations data structure containing pointers to all callbacks.
++ *
++ * Returns -DWC_E_NO_DEVICE if Core is currently is in device mode.
++ * Returns 0 on success
++ */
++extern int dwc_otg_hcd_start(dwc_otg_hcd_t * hcd,
++			     struct dwc_otg_hcd_function_ops *fops);
++
++/**
++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
++ * stopped.
++ *
++ * @param hcd The HCD
++ */
++extern void dwc_otg_hcd_stop(dwc_otg_hcd_t * hcd);
++
++/**
++ * Handles hub class-specific requests.
++ *
++ * @param dwc_otg_hcd The HCD
++ * @param typeReq Request Type
++ * @param wValue wValue from control request
++ * @param wIndex wIndex from control request
++ * @param buf data buffer
++ * @param wLength data buffer length
++ *
++ * Returns -DWC_E_INVALID if invalid argument is passed
++ * Returns 0 on success
++ */
++extern int dwc_otg_hcd_hub_control(dwc_otg_hcd_t * dwc_otg_hcd,
++				   uint16_t typeReq, uint16_t wValue,
++				   uint16_t wIndex, uint8_t * buf,
++				   uint16_t wLength);
++
++/**
++ * Returns otg port number.
++ *
++ * @param hcd The HCD
++ */
++extern uint32_t dwc_otg_hcd_otg_port(dwc_otg_hcd_t * hcd);
++
++/**
++ * Returns OTG version - either 1.3 or 2.0.
++ *
++ * @param core_if The core_if structure pointer
++ */
++extern uint16_t dwc_otg_get_otg_version(dwc_otg_core_if_t * core_if);
++
++/**
++ * Returns 1 if currently core is acting as B host, and 0 otherwise.
++ *
++ * @param hcd The HCD
++ */
++extern uint32_t dwc_otg_hcd_is_b_host(dwc_otg_hcd_t * hcd);
++
++/**
++ * Returns current frame number.
++ *
++ * @param hcd The HCD
++ */
++extern int dwc_otg_hcd_get_frame_number(dwc_otg_hcd_t * hcd);
++
++/**
++ * Dumps hcd state.
++ *
++ * @param hcd The HCD
++ */
++extern void dwc_otg_hcd_dump_state(dwc_otg_hcd_t * hcd);
++
++/**
++ * Dump the average frame remaining at SOF. This can be used to
++ * determine average interrupt latency. Frame remaining is also shown for
++ * start transfer and two additional sample points.
++ * Currently this function is not implemented.
++ *
++ * @param hcd The HCD
++ */
++extern void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * hcd);
++
++/**
++ * Sends LPM transaction to the local device.
++ *
++ * @param hcd The HCD
++ * @param devaddr Device Address
++ * @param hird Host initiated resume duration
++ * @param bRemoteWake Value of bRemoteWake field in LPM transaction
++ *
++ * Returns negative value if sending LPM transaction was not succeeded.
++ * Returns 0 on success.
++ */
++extern int dwc_otg_hcd_send_lpm(dwc_otg_hcd_t * hcd, uint8_t devaddr,
++				uint8_t hird, uint8_t bRemoteWake);
++
++/* URB interface */
++
++/**
++ * Allocates memory for dwc_otg_hcd_urb structure.
++ * Allocated memory should be freed by call of DWC_FREE.
++ *
++ * @param hcd The HCD
++ * @param iso_desc_count Count of ISOC descriptors
++ * @param atomic_alloc Specefies whether to perform atomic allocation.
++ */
++extern dwc_otg_hcd_urb_t *dwc_otg_hcd_urb_alloc(dwc_otg_hcd_t * hcd,
++						int iso_desc_count,
++						int atomic_alloc);
++
++/**
++ * Set pipe information in URB.
++ *
++ * @param hcd_urb DWC_OTG URB
++ * @param devaddr Device Address
++ * @param ep_num Endpoint Number
++ * @param ep_type Endpoint Type
++ * @param ep_dir Endpoint Direction
++ * @param mps Max Packet Size
++ */
++extern void dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_hcd_urb_t * hcd_urb,
++					 uint8_t devaddr, uint8_t ep_num,
++					 uint8_t ep_type, uint8_t ep_dir,
++					 uint16_t mps);
++
++/* Transfer flags */
++#define URB_GIVEBACK_ASAP 0x1
++#define URB_SEND_ZERO_PACKET 0x2
++
++/**
++ * Sets dwc_otg_hcd_urb parameters.
++ *
++ * @param urb DWC_OTG URB allocated by dwc_otg_hcd_urb_alloc function.
++ * @param urb_handle Unique handle for request, this will be passed back
++ * to function driver in completion callback.
++ * @param buf The buffer for the data
++ * @param dma The DMA buffer for the data
++ * @param buflen Transfer length
++ * @param sp Buffer for setup data
++ * @param sp_dma DMA address of setup data buffer
++ * @param flags Transfer flags
++ * @param interval Polling interval for interrupt or isochronous transfers.
++ */
++extern void dwc_otg_hcd_urb_set_params(dwc_otg_hcd_urb_t * urb,
++				       void *urb_handle, void *buf,
++				       dwc_dma_t dma, uint32_t buflen, void *sp,
++				       dwc_dma_t sp_dma, uint32_t flags,
++				       uint16_t interval);
++
++/** Gets status from dwc_otg_hcd_urb
++ *
++ * @param dwc_otg_urb DWC_OTG URB
++ */
++extern uint32_t dwc_otg_hcd_urb_get_status(dwc_otg_hcd_urb_t * dwc_otg_urb);
++
++/** Gets actual length from dwc_otg_hcd_urb
++ *
++ * @param dwc_otg_urb DWC_OTG URB
++ */
++extern uint32_t dwc_otg_hcd_urb_get_actual_length(dwc_otg_hcd_urb_t *
++						  dwc_otg_urb);
++
++/** Gets error count from dwc_otg_hcd_urb. Only for ISOC URBs
++ *
++ * @param dwc_otg_urb DWC_OTG URB
++ */
++extern uint32_t dwc_otg_hcd_urb_get_error_count(dwc_otg_hcd_urb_t *
++						dwc_otg_urb);
++
++/** Set ISOC descriptor offset and length
++ *
++ * @param dwc_otg_urb DWC_OTG URB
++ * @param desc_num ISOC descriptor number
++ * @param offset Offset from beginig of buffer.
++ * @param length Transaction length
++ */
++extern void dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_hcd_urb_t * dwc_otg_urb,
++						int desc_num, uint32_t offset,
++						uint32_t length);
++
++/** Get status of ISOC descriptor, specified by desc_num
++ *
++ * @param dwc_otg_urb DWC_OTG URB
++ * @param desc_num ISOC descriptor number
++ */
++extern uint32_t dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_hcd_urb_t *
++						    dwc_otg_urb, int desc_num);
++
++/** Get actual length of ISOC descriptor, specified by desc_num
++ *
++ * @param dwc_otg_urb DWC_OTG URB
++ * @param desc_num ISOC descriptor number
++ */
++extern uint32_t dwc_otg_hcd_urb_get_iso_desc_actual_length(dwc_otg_hcd_urb_t *
++							   dwc_otg_urb,
++							   int desc_num);
++
++/** Queue URB. After transfer is completes, the complete callback will be called with the URB status
++ *
++ * @param dwc_otg_hcd The HCD
++ * @param dwc_otg_urb DWC_OTG URB
++ * @param ep_handle Out parameter for returning endpoint handle
++ * @param atomic_alloc Flag to do atomic allocation if needed
++ *
++ * Returns -DWC_E_NO_DEVICE if no device is connected.
++ * Returns -DWC_E_NO_MEMORY if there is no enough memory.
++ * Returns 0 on success.
++ */
++extern int dwc_otg_hcd_urb_enqueue(dwc_otg_hcd_t * dwc_otg_hcd,
++				   dwc_otg_hcd_urb_t * dwc_otg_urb,
++				   void **ep_handle, int atomic_alloc);
++
++/** De-queue the specified URB
++ *
++ * @param dwc_otg_hcd The HCD
++ * @param dwc_otg_urb DWC_OTG URB
++ */
++extern int dwc_otg_hcd_urb_dequeue(dwc_otg_hcd_t * dwc_otg_hcd,
++				   dwc_otg_hcd_urb_t * dwc_otg_urb);
++
++/** Frees resources in the DWC_otg controller related to a given endpoint.
++ * Any URBs for the endpoint must already be dequeued.
++ *
++ * @param hcd The HCD
++ * @param ep_handle Endpoint handle, returned by dwc_otg_hcd_urb_enqueue function
++ * @param retry Number of retries if there are queued transfers.
++ *
++ * Returns -DWC_E_INVALID if invalid arguments are passed.
++ * Returns 0 on success
++ */
++extern int dwc_otg_hcd_endpoint_disable(dwc_otg_hcd_t * hcd, void *ep_handle,
++					int retry);
++
++/* Resets the data toggle in qh structure. This function can be called from
++ * usb_clear_halt routine.
++ *
++ * @param hcd The HCD
++ * @param ep_handle Endpoint handle, returned by dwc_otg_hcd_urb_enqueue function
++ *
++ * Returns -DWC_E_INVALID if invalid arguments are passed.
++ * Returns 0 on success
++ */
++extern int dwc_otg_hcd_endpoint_reset(dwc_otg_hcd_t * hcd, void *ep_handle);
++
++/** Returns 1 if status of specified port is changed and 0 otherwise.
++ *
++ * @param hcd The HCD
++ * @param port Port number
++ */
++extern int dwc_otg_hcd_is_status_changed(dwc_otg_hcd_t * hcd, int port);
++
++/** Call this function to check if bandwidth was allocated for specified endpoint.
++ * Only for ISOC and INTERRUPT endpoints.
++ *
++ * @param hcd The HCD
++ * @param ep_handle Endpoint handle
++ */
++extern int dwc_otg_hcd_is_bandwidth_allocated(dwc_otg_hcd_t * hcd,
++					      void *ep_handle);
++
++/** Call this function to check if bandwidth was freed for specified endpoint.
++ *
++ * @param hcd The HCD
++ * @param ep_handle Endpoint handle
++ */
++extern int dwc_otg_hcd_is_bandwidth_freed(dwc_otg_hcd_t * hcd, void *ep_handle);
++
++/** Returns bandwidth allocated for specified endpoint in microseconds.
++ * Only for ISOC and INTERRUPT endpoints.
++ *
++ * @param hcd The HCD
++ * @param ep_handle Endpoint handle
++ */
++extern uint8_t dwc_otg_hcd_get_ep_bandwidth(dwc_otg_hcd_t * hcd,
++					    void *ep_handle);
++
++/** @} */
++
++#endif /* __DWC_HCD_IF_H__ */
++#endif /* DWC_DEVICE_ONLY */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,2741 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_intr.c $
++ * $Revision: #89 $
++ * $Date: 2011/10/20 $
++ * $Change: 1869487 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_regs.h"
++#include "dwc_otg_mphi_fix.h"
++
++#include <linux/jiffies.h>
++#include <mach/hardware.h>
++#include <asm/fiq.h>
++
++
++extern bool microframe_schedule;
++
++/** @file
++ * This file contains the implementation of the HCD Interrupt handlers.
++ */
++
++/*
++ * Some globals to communicate between the FIQ and INTERRUPT
++ */
++
++void * dummy_send;
++mphi_regs_t c_mphi_regs;
++volatile void *dwc_regs_base;
++int fiq_done, int_done;
++
++gintsts_data_t  gintsts_saved = {.d32 = 0};
++hcint_data_t    hcint_saved[MAX_EPS_CHANNELS];
++hcintmsk_data_t hcintmsk_saved[MAX_EPS_CHANNELS];
++int             split_out_xfersize[MAX_EPS_CHANNELS];
++haint_data_t    haint_saved;
++
++int g_next_sched_frame, g_np_count, g_np_sent;
++static int mphi_int_count = 0 ;
++
++hcchar_data_t nak_hcchar;
++hctsiz_data_t nak_hctsiz;
++hcsplt_data_t nak_hcsplt;
++int nak_count;
++
++int complete_sched[MAX_EPS_CHANNELS] = { -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1};
++int split_start_frame[MAX_EPS_CHANNELS];
++int queued_port[MAX_EPS_CHANNELS];
++
++#ifdef FIQ_DEBUG
++char buffer[1000*16];
++int wptr;
++void notrace _fiq_print(FIQDBG_T dbg_lvl, char *fmt, ...)
++{
++	FIQDBG_T dbg_lvl_req = FIQDBG_PORTHUB;
++	va_list args;
++	char text[17];
++	hfnum_data_t hfnum = { .d32 = FIQ_READ(dwc_regs_base + 0x408) };
++	unsigned long flags;
++
++	local_irq_save(flags);
++	local_fiq_disable();
++	if(dbg_lvl & dbg_lvl_req || dbg_lvl == FIQDBG_ERR)
++	{
++		snprintf(text, 9, "%4d%d:%d ", hfnum.b.frnum/8, hfnum.b.frnum%8, 8 - hfnum.b.frrem/937);
++		va_start(args, fmt);
++		vsnprintf(text+8, 9, fmt, args);
++		va_end(args);
++
++		memcpy(buffer + wptr, text, 16);
++		wptr = (wptr + 16) % sizeof(buffer);
++	}
++	local_irq_restore(flags);
++}
++#endif
++
++void notrace fiq_queue_request(int channel, int odd_frame)
++{
++	hcchar_data_t   hcchar   = { .d32 = FIQ_READ(dwc_regs_base + 0x500 + (channel * 0x20) + 0x0)  };
++	hcsplt_data_t   hcsplt   = { .d32 = FIQ_READ(dwc_regs_base + 0x500 + (channel * 0x20) + 0x4)  };
++	hctsiz_data_t   hctsiz   = { .d32 = FIQ_READ(dwc_regs_base + 0x500 + (channel * 0x20) + 0x10) };
++
++	if(hcsplt.b.spltena	== 0)
++	{
++		fiq_print(FIQDBG_ERR, "SPLTENA ");
++		BUG();
++	}
++
++	if(hcchar.b.epdir == 1)
++	{
++		fiq_print(FIQDBG_SCHED, "IN  Ch %d", channel);
++	}
++	else
++	{
++		hctsiz.b.xfersize = 0;
++		fiq_print(FIQDBG_SCHED, "OUT Ch %d", channel);
++	}
++	FIQ_WRITE((dwc_regs_base + 0x500 + (channel * 0x20) + 0x10), hctsiz.d32);
++
++	hcsplt.b.compsplt = 1;
++	FIQ_WRITE((dwc_regs_base + 0x500 + (channel * 0x20) + 0x4), hcsplt.d32);
++
++	// Send the Split complete
++	hcchar.b.chen = 1;
++	hcchar.b.oddfrm = odd_frame ? 1 : 0;
++
++	// Post this for transmit on the next frame for periodic or this frame for non-periodic
++	fiq_print(FIQDBG_SCHED, "SND_%s", odd_frame ? "ODD " : "EVEN");
++
++	FIQ_WRITE((dwc_regs_base + 0x500 + (channel * 0x20) + 0x0), hcchar.d32);
++}
++
++static int last_sof = -1;
++
++/*
++** Function to handle the start of frame interrupt, choose whether we need to do anything and
++** therefore trigger the main interrupt
++**
++** returns int != 0 - interrupt has been handled
++*/
++int diff;
++
++int notrace fiq_sof_handle(hfnum_data_t hfnum)
++{
++	int handled = 0;
++	int i;
++
++	// Just check that once we're running we don't miss a SOF
++	/*if(last_sof != -1 && (hfnum.b.frnum != ((last_sof + 1) & 0x3fff)))
++	{
++		fiq_print(FIQDBG_ERR, "LASTSOF ");
++		fiq_print(FIQDBG_ERR, "%4d%d   ", last_sof / 8, last_sof & 7);
++		fiq_print(FIQDBG_ERR, "%4d%d   ", hfnum.b.frnum / 8, hfnum.b.frnum & 7);
++		BUG();
++	}*/
++
++	// Only start remembering the last sof when the interrupt has been
++	// enabled (we don't check the mask to come in here...)
++	if(last_sof != -1 || FIQ_READ(dwc_regs_base + 0x18) & (1<<3))
++		last_sof = hfnum.b.frnum;
++
++	for(i = 0; i < MAX_EPS_CHANNELS; i++)
++	{
++		if(complete_sched[i] != -1)
++		{
++			if(complete_sched[i] <= hfnum.b.frnum || (complete_sched[i] > 0x3f00 && hfnum.b.frnum < 0xf0))
++			{
++				fiq_queue_request(i, hfnum.b.frnum & 1);
++				complete_sched[i] = -1;
++			}
++		}
++
++		if(complete_sched[i] != -1)
++		{
++			// This is because we've seen a split complete occur with no start...
++			// most likely because missed the complete 0x3fff frames ago!
++
++			diff = (hfnum.b.frnum + 0x3fff - complete_sched[i]) & 0x3fff ;
++			if(diff > 32 && diff < 0x3f00)
++			{
++				fiq_print(FIQDBG_ERR, "SPLTMISS");
++				BUG();
++			}
++		}
++	}
++
++	if(g_np_count == g_np_sent && dwc_frame_num_gt(g_next_sched_frame, hfnum.b.frnum))
++	{
++		/*
++		 * If np_count != np_sent that means we need to queue non-periodic (bulk) packets this packet
++		 * g_next_sched_frame is the next frame we have periodic packets for
++		 *
++		 * if neither of these are required for this frame then just clear the interrupt
++		 */
++		handled = 1;
++
++	}
++
++	return handled;
++}
++
++int notrace port_id(hcsplt_data_t hcsplt)
++{
++	return hcsplt.b.prtaddr + (hcsplt.b.hubaddr << 8);
++}
++
++int notrace fiq_hcintr_handle(int channel, hfnum_data_t hfnum)
++{
++	hcchar_data_t   hcchar   = { .d32 = FIQ_READ(dwc_regs_base + 0x500 + (channel * 0x20) + 0x0) };
++	hcsplt_data_t   hcsplt   = { .d32 = FIQ_READ(dwc_regs_base + 0x500 + (channel * 0x20) + 0x4) };
++	hcint_data_t    hcint    = { .d32 = FIQ_READ(dwc_regs_base + 0x500 + (channel * 0x20) + 0x8) };
++	hcintmsk_data_t hcintmsk = { .d32 = FIQ_READ(dwc_regs_base + 0x500 + (channel * 0x20) + 0xc) };
++	hctsiz_data_t   hctsiz   = { .d32 = FIQ_READ(dwc_regs_base + 0x500 + (channel * 0x20) + 0x10)};
++
++	hcint_saved[channel].d32 |= hcint.d32;
++	hcintmsk_saved[channel].d32 =  hcintmsk.d32;
++
++	if(hcsplt.b.spltena)
++	{
++		fiq_print(FIQDBG_PORTHUB, "ph: %4x", port_id(hcsplt));
++		if(hcint.b.chhltd)
++		{
++			fiq_print(FIQDBG_SCHED, "CH HLT %d", channel);
++			fiq_print(FIQDBG_SCHED, "%08x", hcint_saved[channel]);
++		}
++		if(hcint.b.stall || hcint.b.xacterr || hcint.b.bblerr || hcint.b.frmovrun || hcint.b.datatglerr)
++		{
++			queued_port[channel] = 0;
++			fiq_print(FIQDBG_ERR, "CHAN ERR");
++		}
++		if(hcint.b.xfercomp)
++		{
++			// Clear the port allocation and transmit anything also on this port
++			queued_port[channel] = 0;
++			fiq_print(FIQDBG_SCHED, "XFERCOMP");
++		}
++		if(hcint.b.nak)
++		{
++			queued_port[channel] = 0;
++			fiq_print(FIQDBG_SCHED, "NAK");
++		}
++		if(hcint.b.ack && !hcsplt.b.compsplt)
++		{
++			int i;
++
++			// Do not complete isochronous out transactions
++			if(hcchar.b.eptype == 1 && hcchar.b.epdir == 0)
++			{
++				queued_port[channel] = 0;
++				fiq_print(FIQDBG_SCHED, "ISOC_OUT");
++			}
++			else
++			{
++				// Make sure we check the port / hub combination that we sent this split on.
++				// Do not queue a second request to the same port
++				for(i = 0; i < MAX_EPS_CHANNELS; i++)
++				{
++					if(port_id(hcsplt) == queued_port[i])
++					{
++						fiq_print(FIQDBG_ERR, "PORTERR ");
++						//BUG();
++					}
++				}
++
++				split_start_frame[channel] = (hfnum.b.frnum + 1) & ~7;
++
++				// Note, the size of an OUT is in the start split phase, not
++				// the complete split
++				split_out_xfersize[channel] = hctsiz.b.xfersize;
++
++				hcint_saved[channel].b.chhltd = 0;
++				hcint_saved[channel].b.ack = 0;
++
++				queued_port[channel] = port_id(hcsplt);
++
++				if(hcchar.b.eptype & 1)
++				{
++					// Send the periodic complete in the same oddness frame as the ACK went...
++					fiq_queue_request(channel, !(hfnum.b.frnum & 1));
++	//				complete_sched[channel] = dwc_frame_num_inc(hfnum.b.frnum, 1);
++				}
++				else
++				{
++					// Schedule the split complete to occur later
++					complete_sched[channel] = dwc_frame_num_inc(hfnum.b.frnum, 2);
++					fiq_print(FIQDBG_SCHED, "ACK%04d%d", complete_sched[channel]/8, complete_sched[channel]%8);
++				}
++			}
++		}
++		if(hcint.b.nyet)
++		{
++			fiq_print(FIQDBG_ERR, "NYETERR1");
++			//BUG();
++			// Can transmit a split complete up to uframe .0 of the next frame
++			if(hfnum.b.frnum <= dwc_frame_num_inc(split_start_frame[channel], 8))
++			{
++				// Send it next frame
++				if(hcchar.b.eptype & 1) // type 1 & 3 are interrupt & isoc
++				{
++					fiq_print(FIQDBG_SCHED, "NYT:SEND");
++					fiq_queue_request(channel, !(hfnum.b.frnum & 1));
++				}
++				else
++				{
++					// Schedule non-periodic access for next frame (the odd-even bit doesn't effect NP)
++					complete_sched[channel] = dwc_frame_num_inc(hfnum.b.frnum, 1);
++					fiq_print(FIQDBG_SCHED, "NYT%04d%d", complete_sched[channel]/8, complete_sched[channel]%8);
++				}
++				hcint_saved[channel].b.chhltd = 0;
++				hcint_saved[channel].b.nyet = 0;
++			}
++			else
++			{
++				queued_port[channel] = 0;
++				fiq_print(FIQDBG_ERR, "NYETERR2");
++				//BUG();
++			}
++		}
++	}
++	else
++	{
++		/*
++		 * If we have any of NAK, ACK, Datatlgerr active on a
++		 * non-split channel, the sole reason is to reset error
++		 * counts for a previously broken transaction. The FIQ
++		 * will thrash on NAK IN and ACK OUT in particular so
++		 * handle it "once" and allow the IRQ to do the rest.
++		 */
++		hcint.d32 &= hcintmsk.d32;
++		if(hcint.b.nak)
++		{
++			hcintmsk.b.nak = 0;
++			FIQ_WRITE((dwc_regs_base + 0x500 + (channel * 0x20) + 0xc), hcintmsk.d32);
++		}
++		if (hcint.b.ack)
++		{
++			hcintmsk.b.ack = 0;
++			FIQ_WRITE((dwc_regs_base + 0x500 + (channel * 0x20) + 0xc), hcintmsk.d32);
++		}
++	}
++
++	// Clear the interrupt, this will also clear the HAINT bit
++	FIQ_WRITE((dwc_regs_base + 0x500 + (channel * 0x20) + 0x8), hcint.d32);
++	return hcint_saved[channel].d32 == 0;
++}
++
++gintsts_data_t gintsts;
++gintmsk_data_t gintmsk;
++// triggered: The set of interrupts that were triggered
++// handled:   The set of interrupts that have been handled (no IRQ is
++//            required)
++// keep:      The set of interrupts we want to keep unmasked even though we
++//            want to trigger an IRQ to handle it (SOF and HCINTR)
++gintsts_data_t triggered, handled, keep;
++hfnum_data_t hfnum;
++
++void __attribute__ ((naked)) notrace dwc_otg_hcd_handle_fiq(void)
++{
++
++	/* entry takes care to store registers we will be treading on here */
++	asm __volatile__ (
++		"mov     ip, sp ;"
++		/* stash FIQ and normal regs */
++		"stmdb	sp!, {r0-r12,  lr};"
++		/* !! THIS SETS THE FRAME, adjust to > sizeof locals */
++		"sub     fp, ip, #512 ;"
++		);
++
++	// Cannot put local variables at the beginning of the function
++	// because otherwise 'C' will play with the stack pointer. any locals
++	// need to be inside the following block
++	do
++	{
++		fiq_done++;
++		gintsts.d32 = FIQ_READ(dwc_regs_base + 0x14);
++		gintmsk.d32 = FIQ_READ(dwc_regs_base + 0x18);
++		hfnum.d32 =   FIQ_READ(dwc_regs_base + 0x408);
++		triggered.d32 = gintsts.d32 & gintmsk.d32;
++		handled.d32 = 0;
++		keep.d32 = 0;
++		fiq_print(FIQDBG_INT, "FIQ     ");
++		fiq_print(FIQDBG_INT, "%08x", gintsts.d32);
++		fiq_print(FIQDBG_INT, "%08x", gintmsk.d32);
++		if(gintsts.d32)
++		{
++			// If port enabled
++			if((FIQ_READ(dwc_regs_base + 0x440) & 0xf) == 0x5)
++			{
++				if(gintsts.b.sofintr)
++				{
++					if(fiq_sof_handle(hfnum))
++					{
++						handled.b.sofintr = 1; /* Handled in FIQ */
++					}
++					else
++					{
++						/* Keer interrupt unmasked */
++						keep.b.sofintr = 1;
++					}
++					{
++						// Need to make sure the read and clearing of the SOF interrupt is as close as possible to avoid the possibility of missing
++						// a start of frame interrupt
++						gintsts_data_t gintsts = { .b.sofintr = 1 };
++						FIQ_WRITE((dwc_regs_base + 0x14), gintsts.d32);
++					}
++				}
++
++				if(fiq_split_enable && gintsts.b.hcintr)
++				{
++					int i;
++					haint_data_t    haint;
++					haintmsk_data_t haintmsk;
++
++					haint.d32 = FIQ_READ(dwc_regs_base + 0x414);
++					haintmsk.d32 = FIQ_READ(dwc_regs_base + 0x418);
++					haint.d32 &= haintmsk.d32;
++					haint_saved.d32 |= haint.d32;
++
++					fiq_print(FIQDBG_INT, "hcintr");
++					fiq_print(FIQDBG_INT, "%08x", FIQ_READ(dwc_regs_base + 0x414));
++
++					// Go through each channel that has an enabled interrupt
++					for(i = 0; i < 16; i++)
++						if((haint.d32 >> i) & 1)
++							if(fiq_hcintr_handle(i, hfnum))
++								haint_saved.d32 &= ~(1 << i); /* this was handled */
++
++					/* If we've handled all host channel interrupts then don't trigger the interrupt */
++					if(haint_saved.d32 == 0)
++					{
++						handled.b.hcintr = 1;
++					}
++					else
++					{
++						/* Make sure we keep the channel interrupt unmasked when triggering the IRQ */
++						keep.b.hcintr = 1;
++					}
++
++					{
++						gintsts_data_t gintsts = { .b.hcintr = 1 };
++
++						// Always clear the channel interrupt
++						FIQ_WRITE((dwc_regs_base + 0x14), gintsts.d32);
++					}
++				}
++			}
++			else
++			{
++				last_sof = -1;
++			}
++		}
++
++		// Mask out the interrupts triggered - those handled - don't mask out the ones we want to keep
++		gintmsk.d32 = keep.d32 | (gintmsk.d32 & ~(triggered.d32 & ~handled.d32));
++		// Save those that were triggered but not handled
++		gintsts_saved.d32 |= triggered.d32 & ~handled.d32;
++		FIQ_WRITE(dwc_regs_base + 0x18, gintmsk.d32);
++
++		// Clear and save any unhandled interrupts and trigger the interrupt
++		if(gintsts_saved.d32)
++		{
++			/* To enable the MPHI interrupt  (INT 32)
++			 */
++			FIQ_WRITE( c_mphi_regs.outdda, (int) dummy_send);
++			FIQ_WRITE( c_mphi_regs.outddb, (1 << 29));
++
++			mphi_int_count++;
++		}
++	}
++	while(0);
++
++	mb();
++
++	/* exit back to normal mode restoring everything */
++	asm __volatile__ (
++		/* return FIQ regs back to pristine state
++		 * and get normal regs back
++		 */
++		"ldmia	sp!, {r0-r12, lr};"
++
++		/* return */
++		"subs	pc, lr, #4;"
++	);
++}
++
++/** This function handles interrupts for the HCD. */
++int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd)
++{
++	int retval = 0;
++	static int last_time;
++
++	dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
++	gintsts_data_t gintsts;
++	gintmsk_data_t gintmsk;
++	hfnum_data_t hfnum;
++
++#ifdef DEBUG
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++
++#endif
++
++	gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++	gintmsk.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk);
++
++	/* Exit from ISR if core is hibernated */
++	if (core_if->hibernation_suspend == 1) {
++		goto exit_handler_routine;
++	}
++	DWC_SPINLOCK(dwc_otg_hcd->lock);
++	/* Check if HOST Mode */
++	if (dwc_otg_is_host_mode(core_if)) {
++		local_fiq_disable();
++		gintmsk.d32 |= gintsts_saved.d32;
++		gintsts.d32 |= gintsts_saved.d32;
++		gintsts_saved.d32 = 0;
++		local_fiq_enable();
++		if (!gintsts.d32) {
++			goto exit_handler_routine;
++		}
++		gintsts.d32 &= gintmsk.d32;
++
++#ifdef DEBUG
++		// We should be OK doing this because the common interrupts should already have been serviced
++		/* Don't print debug message in the interrupt handler on SOF */
++#ifndef DEBUG_SOF
++		if (gintsts.d32 != DWC_SOF_INTR_MASK)
++#endif
++			DWC_DEBUGPL(DBG_HCDI, "\n");
++#endif
++
++#ifdef DEBUG
++#ifndef DEBUG_SOF
++		if (gintsts.d32 != DWC_SOF_INTR_MASK)
++#endif
++			DWC_DEBUGPL(DBG_HCDI,
++				    "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x core_if=%p\n",
++				    gintsts.d32, core_if);
++#endif
++		hfnum.d32 = DWC_READ_REG32(&dwc_otg_hcd->core_if->host_if->host_global_regs->hfnum);
++		if (gintsts.b.sofintr && g_np_count == g_np_sent && dwc_frame_num_gt(g_next_sched_frame, hfnum.b.frnum))
++		{
++			/* Note, we should never get here if the FIQ is doing it's job properly*/
++			retval |= dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd);
++		}
++		else if (gintsts.b.sofintr) {
++			retval |= dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd);
++		}
++
++		if (gintsts.b.rxstsqlvl) {
++			retval |=
++			    dwc_otg_hcd_handle_rx_status_q_level_intr
++			    (dwc_otg_hcd);
++		}
++		if (gintsts.b.nptxfempty) {
++			retval |=
++			    dwc_otg_hcd_handle_np_tx_fifo_empty_intr
++			    (dwc_otg_hcd);
++		}
++		if (gintsts.b.i2cintr) {
++			/** @todo Implement i2cintr handler. */
++		}
++		if (gintsts.b.portintr) {
++
++			gintmsk_data_t gintmsk = { .b.portintr = 1};
++			retval |= dwc_otg_hcd_handle_port_intr(dwc_otg_hcd);
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, gintmsk.d32);
++		}
++		if (gintsts.b.hcintr) {
++			retval |= dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd);
++		}
++		if (gintsts.b.ptxfempty) {
++			retval |=
++			    dwc_otg_hcd_handle_perio_tx_fifo_empty_intr
++			    (dwc_otg_hcd);
++		}
++#ifdef DEBUG
++#ifndef DEBUG_SOF
++		if (gintsts.d32 != DWC_SOF_INTR_MASK)
++#endif
++		{
++			DWC_DEBUGPL(DBG_HCDI,
++				    "DWC OTG HCD Finished Servicing Interrupts\n");
++			DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintsts=0x%08x\n",
++				    DWC_READ_REG32(&global_regs->gintsts));
++			DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintmsk=0x%08x\n",
++				    DWC_READ_REG32(&global_regs->gintmsk));
++		}
++#endif
++
++#ifdef DEBUG
++#ifndef DEBUG_SOF
++		if (gintsts.d32 != DWC_SOF_INTR_MASK)
++#endif
++			DWC_DEBUGPL(DBG_HCDI, "\n");
++#endif
++
++	}
++
++exit_handler_routine:
++
++	if (fiq_fix_enable)
++	{
++		local_fiq_disable();
++		// Make sure that we don't clear the interrupt if we've still got pending work to do
++		if(gintsts_saved.d32 == 0)
++		{
++			/* Clear the MPHI interrupt */
++			DWC_WRITE_REG32(c_mphi_regs.intstat, (1<<16));
++			if (mphi_int_count >= 60)
++			{
++				DWC_WRITE_REG32(c_mphi_regs.ctrl, ((1<<31) + (1<<16)));
++				while(!(DWC_READ_REG32(c_mphi_regs.ctrl) & (1 << 17)))
++					;
++				DWC_WRITE_REG32(c_mphi_regs.ctrl, (1<<31));
++				mphi_int_count = 0;
++			}
++			int_done++;
++		}
++
++		// Unmask handled interrupts
++		FIQ_WRITE(dwc_regs_base + 0x18, gintmsk.d32);
++		//DWC_MODIFY_REG32((uint32_t *)IO_ADDRESS(USB_BASE + 0x8), 0 , 1);
++
++		local_fiq_enable();
++
++		if((jiffies / HZ) > last_time)
++		{
++			/* Once a second output the fiq and irq numbers, useful for debug */
++			last_time = jiffies / HZ;
++			DWC_DEBUGPL(DBG_USER, "int_done = %d fiq_done = %d\n", int_done, fiq_done);
++		}
++	}
++
++	DWC_SPINUNLOCK(dwc_otg_hcd->lock);
++	return retval;
++}
++
++#ifdef DWC_TRACK_MISSED_SOFS
++
++#warning Compiling code to track missed SOFs
++#define FRAME_NUM_ARRAY_SIZE 1000
++/**
++ * This function is for debug only.
++ */
++static inline void track_missed_sofs(uint16_t curr_frame_number)
++{
++	static uint16_t frame_num_array[FRAME_NUM_ARRAY_SIZE];
++	static uint16_t last_frame_num_array[FRAME_NUM_ARRAY_SIZE];
++	static int frame_num_idx = 0;
++	static uint16_t last_frame_num = DWC_HFNUM_MAX_FRNUM;
++	static int dumped_frame_num_array = 0;
++
++	if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) {
++		if (((last_frame_num + 1) & DWC_HFNUM_MAX_FRNUM) !=
++		    curr_frame_number) {
++			frame_num_array[frame_num_idx] = curr_frame_number;
++			last_frame_num_array[frame_num_idx++] = last_frame_num;
++		}
++	} else if (!dumped_frame_num_array) {
++		int i;
++		DWC_PRINTF("Frame     Last Frame\n");
++		DWC_PRINTF("-----     ----------\n");
++		for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) {
++			DWC_PRINTF("0x%04x    0x%04x\n",
++				   frame_num_array[i], last_frame_num_array[i]);
++		}
++		dumped_frame_num_array = 1;
++	}
++	last_frame_num = curr_frame_number;
++}
++#endif
++
++/**
++ * Handles the start-of-frame interrupt in host mode. Non-periodic
++ * transactions may be queued to the DWC_otg controller for the current
++ * (micro)frame. Periodic transactions may be queued to the controller for the
++ * next (micro)frame.
++ */
++int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t * hcd)
++{
++	hfnum_data_t hfnum;
++	dwc_list_link_t *qh_entry;
++	dwc_otg_qh_t *qh;
++	dwc_otg_transaction_type_e tr_type;
++	int did_something = 0;
++	int32_t next_sched_frame = -1;
++
++	hfnum.d32 =
++	    DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hfnum);
++
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n");
++#endif
++	hcd->frame_number = hfnum.b.frnum;
++
++#ifdef DEBUG
++	hcd->frrem_accum += hfnum.b.frrem;
++	hcd->frrem_samples++;
++#endif
++
++#ifdef DWC_TRACK_MISSED_SOFS
++	track_missed_sofs(hcd->frame_number);
++#endif
++	/* Determine whether any periodic QHs should be executed. */
++	qh_entry = DWC_LIST_FIRST(&hcd->periodic_sched_inactive);
++	while (qh_entry != &hcd->periodic_sched_inactive) {
++		qh = DWC_LIST_ENTRY(qh_entry, dwc_otg_qh_t, qh_list_entry);
++		qh_entry = qh_entry->next;
++		if (dwc_frame_num_le(qh->sched_frame, hcd->frame_number)) {
++
++			/*
++			 * Move QH to the ready list to be executed next
++			 * (micro)frame.
++			 */
++			DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_ready,
++					   &qh->qh_list_entry);
++
++			did_something = 1;
++		}
++		else
++		{
++			if(next_sched_frame < 0 || dwc_frame_num_le(qh->sched_frame, next_sched_frame))
++			{
++				next_sched_frame = qh->sched_frame;
++			}
++		}
++	}
++
++	g_next_sched_frame = next_sched_frame;
++
++	tr_type = dwc_otg_hcd_select_transactions(hcd);
++	if (tr_type != DWC_OTG_TRANSACTION_NONE) {
++		dwc_otg_hcd_queue_transactions(hcd, tr_type);
++		did_something = 1;
++	}
++
++	/* Clear interrupt */
++	gintsts.b.sofintr = 1;
++	DWC_WRITE_REG32(&hcd->core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/** Handles the Rx Status Queue Level Interrupt, which indicates that there is at
++ * least one packet in the Rx FIFO.  The packets are moved from the FIFO to
++ * memory if the DWC_otg controller is operating in Slave mode. */
++int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t * dwc_otg_hcd)
++{
++	host_grxsts_data_t grxsts;
++	dwc_hc_t *hc = NULL;
++
++	DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n");
++
++	grxsts.d32 =
++	    DWC_READ_REG32(&dwc_otg_hcd->core_if->core_global_regs->grxstsp);
++
++	hc = dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum];
++	if (!hc) {
++		DWC_ERROR("Unable to get corresponding channel\n");
++		return 0;
++	}
++
++	/* Packet Status */
++	DWC_DEBUGPL(DBG_HCDV, "    Ch num = %d\n", grxsts.b.chnum);
++	DWC_DEBUGPL(DBG_HCDV, "    Count = %d\n", grxsts.b.bcnt);
++	DWC_DEBUGPL(DBG_HCDV, "    DPID = %d, hc.dpid = %d\n", grxsts.b.dpid,
++		    hc->data_pid_start);
++	DWC_DEBUGPL(DBG_HCDV, "    PStatus = %d\n", grxsts.b.pktsts);
++
++	switch (grxsts.b.pktsts) {
++	case DWC_GRXSTS_PKTSTS_IN:
++		/* Read the data into the host buffer. */
++		if (grxsts.b.bcnt > 0) {
++			dwc_otg_read_packet(dwc_otg_hcd->core_if,
++					    hc->xfer_buff, grxsts.b.bcnt);
++
++			/* Update the HC fields for the next packet received. */
++			hc->xfer_count += grxsts.b.bcnt;
++			hc->xfer_buff += grxsts.b.bcnt;
++		}
++
++	case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
++	case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR:
++	case DWC_GRXSTS_PKTSTS_CH_HALTED:
++		/* Handled in interrupt, just ignore data */
++		break;
++	default:
++		DWC_ERROR("RX_STS_Q Interrupt: Unknown status %d\n",
++			  grxsts.b.pktsts);
++		break;
++	}
++
++	return 1;
++}
++
++/** This interrupt occurs when the non-periodic Tx FIFO is half-empty. More
++ * data packets may be written to the FIFO for OUT transfers. More requests
++ * may be written to the non-periodic request queue for IN transfers. This
++ * interrupt is enabled only in Slave mode. */
++int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t * dwc_otg_hcd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Interrupt--\n");
++	dwc_otg_hcd_queue_transactions(dwc_otg_hcd,
++				       DWC_OTG_TRANSACTION_NON_PERIODIC);
++	return 1;
++}
++
++/** This interrupt occurs when the periodic Tx FIFO is half-empty. More data
++ * packets may be written to the FIFO for OUT transfers. More requests may be
++ * written to the periodic request queue for IN transfers. This interrupt is
++ * enabled only in Slave mode. */
++int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t * dwc_otg_hcd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interrupt--\n");
++	dwc_otg_hcd_queue_transactions(dwc_otg_hcd,
++				       DWC_OTG_TRANSACTION_PERIODIC);
++	return 1;
++}
++
++/** There are multiple conditions that can cause a port interrupt. This function
++ * determines which interrupt conditions have occurred and handles them
++ * appropriately. */
++int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t * dwc_otg_hcd)
++{
++	int retval = 0;
++	hprt0_data_t hprt0;
++	hprt0_data_t hprt0_modify;
++
++	hprt0.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0);
++	hprt0_modify.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0);
++
++	/* Clear appropriate bits in HPRT0 to clear the interrupt bit in
++	 * GINTSTS */
++
++	hprt0_modify.b.prtena = 0;
++	hprt0_modify.b.prtconndet = 0;
++	hprt0_modify.b.prtenchng = 0;
++	hprt0_modify.b.prtovrcurrchng = 0;
++
++	/* Port Connect Detected
++	 * Set flag and clear if detected */
++	if (dwc_otg_hcd->core_if->hibernation_suspend == 1) {
++		// Dont modify port status if we are in hibernation state
++		hprt0_modify.b.prtconndet = 1;
++		hprt0_modify.b.prtenchng = 1;
++		DWC_WRITE_REG32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32);
++		hprt0.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0);
++		return retval;
++	}
++
++	if (hprt0.b.prtconndet) {
++		/** @todo - check if steps performed in 'else' block should be perfromed regardles adp */
++		if (dwc_otg_hcd->core_if->adp_enable &&
++				dwc_otg_hcd->core_if->adp.vbuson_timer_started == 1) {
++			DWC_PRINTF("PORT CONNECT DETECTED ----------------\n");
++			DWC_TIMER_CANCEL(dwc_otg_hcd->core_if->adp.vbuson_timer);
++			dwc_otg_hcd->core_if->adp.vbuson_timer_started = 0;
++			/* TODO - check if this is required, as
++			 * host initialization was already performed
++			 * after initial ADP probing
++			 */
++			/*dwc_otg_hcd->core_if->adp.vbuson_timer_started = 0;
++			dwc_otg_core_init(dwc_otg_hcd->core_if);
++			dwc_otg_enable_global_interrupts(dwc_otg_hcd->core_if);
++			cil_hcd_start(dwc_otg_hcd->core_if);*/
++		} else {
++
++			DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x "
++				    "Port Connect Detected--\n", hprt0.d32);
++			dwc_otg_hcd->flags.b.port_connect_status_change = 1;
++			dwc_otg_hcd->flags.b.port_connect_status = 1;
++			hprt0_modify.b.prtconndet = 1;
++
++			/* B-Device has connected, Delete the connection timer. */
++			DWC_TIMER_CANCEL(dwc_otg_hcd->conn_timer);
++		}
++		/* The Hub driver asserts a reset when it sees port connect
++		 * status change flag */
++		retval |= 1;
++	}
++
++	/* Port Enable Changed
++	 * Clear if detected - Set internal flag if disabled */
++	if (hprt0.b.prtenchng) {
++		DWC_DEBUGPL(DBG_HCD, "  --Port Interrupt HPRT0=0x%08x "
++			    "Port Enable Changed--\n", hprt0.d32);
++		hprt0_modify.b.prtenchng = 1;
++		if (hprt0.b.prtena == 1) {
++			hfir_data_t hfir;
++			int do_reset = 0;
++			dwc_otg_core_params_t *params =
++			    dwc_otg_hcd->core_if->core_params;
++			dwc_otg_core_global_regs_t *global_regs =
++			    dwc_otg_hcd->core_if->core_global_regs;
++			dwc_otg_host_if_t *host_if =
++			    dwc_otg_hcd->core_if->host_if;
++
++			/* Every time when port enables calculate
++			 * HFIR.FrInterval
++			 */
++			hfir.d32 = DWC_READ_REG32(&host_if->host_global_regs->hfir);
++			hfir.b.frint = calc_frame_interval(dwc_otg_hcd->core_if);
++			DWC_WRITE_REG32(&host_if->host_global_regs->hfir, hfir.d32);
++
++			/* Check if we need to adjust the PHY clock speed for
++			 * low power and adjust it */
++			if (params->host_support_fs_ls_low_power) {
++				gusbcfg_data_t usbcfg;
++
++				usbcfg.d32 =
++				    DWC_READ_REG32(&global_regs->gusbcfg);
++
++				if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED
++				    || hprt0.b.prtspd ==
++				    DWC_HPRT0_PRTSPD_FULL_SPEED) {
++					/*
++					 * Low power
++					 */
++					hcfg_data_t hcfg;
++					if (usbcfg.b.phylpwrclksel == 0) {
++						/* Set PHY low power clock select for FS/LS devices */
++						usbcfg.b.phylpwrclksel = 1;
++						DWC_WRITE_REG32
++						    (&global_regs->gusbcfg,
++						     usbcfg.d32);
++						do_reset = 1;
++					}
++
++					hcfg.d32 =
++					    DWC_READ_REG32
++					    (&host_if->host_global_regs->hcfg);
++
++					if (hprt0.b.prtspd ==
++					    DWC_HPRT0_PRTSPD_LOW_SPEED
++					    && params->host_ls_low_power_phy_clk
++					    ==
++					    DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ)
++					{
++						/* 6 MHZ */
++						DWC_DEBUGPL(DBG_CIL,
++							    "FS_PHY programming HCFG to 6 MHz (Low Power)\n");
++						if (hcfg.b.fslspclksel !=
++						    DWC_HCFG_6_MHZ) {
++							hcfg.b.fslspclksel =
++							    DWC_HCFG_6_MHZ;
++							DWC_WRITE_REG32
++							    (&host_if->host_global_regs->hcfg,
++							     hcfg.d32);
++							do_reset = 1;
++						}
++					} else {
++						/* 48 MHZ */
++						DWC_DEBUGPL(DBG_CIL,
++							    "FS_PHY programming HCFG to 48 MHz ()\n");
++						if (hcfg.b.fslspclksel !=
++						    DWC_HCFG_48_MHZ) {
++							hcfg.b.fslspclksel =
++							    DWC_HCFG_48_MHZ;
++							DWC_WRITE_REG32
++							    (&host_if->host_global_regs->hcfg,
++							     hcfg.d32);
++							do_reset = 1;
++						}
++					}
++				} else {
++					/*
++					 * Not low power
++					 */
++					if (usbcfg.b.phylpwrclksel == 1) {
++						usbcfg.b.phylpwrclksel = 0;
++						DWC_WRITE_REG32
++						    (&global_regs->gusbcfg,
++						     usbcfg.d32);
++						do_reset = 1;
++					}
++				}
++
++				if (do_reset) {
++					DWC_TASK_SCHEDULE(dwc_otg_hcd->reset_tasklet);
++				}
++			}
++
++			if (!do_reset) {
++				/* Port has been enabled set the reset change flag */
++				dwc_otg_hcd->flags.b.port_reset_change = 1;
++			}
++		} else {
++			dwc_otg_hcd->flags.b.port_enable_change = 1;
++		}
++		retval |= 1;
++	}
++
++	/** Overcurrent Change Interrupt */
++	if (hprt0.b.prtovrcurrchng) {
++		DWC_DEBUGPL(DBG_HCD, "  --Port Interrupt HPRT0=0x%08x "
++			    "Port Overcurrent Changed--\n", hprt0.d32);
++		dwc_otg_hcd->flags.b.port_over_current_change = 1;
++		hprt0_modify.b.prtovrcurrchng = 1;
++		retval |= 1;
++	}
++
++	/* Clear Port Interrupts */
++	DWC_WRITE_REG32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32);
++
++	return retval;
++}
++
++/** This interrupt indicates that one or more host channels has a pending
++ * interrupt. There are multiple conditions that can cause each host channel
++ * interrupt. This function determines which conditions have occurred for each
++ * host channel interrupt and handles them appropriately. */
++int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t * dwc_otg_hcd)
++{
++	int i;
++	int retval = 0;
++	haint_data_t haint;
++
++	/* Clear appropriate bits in HCINTn to clear the interrupt bit in
++	 * GINTSTS */
++
++	haint.d32 = dwc_otg_read_host_all_channels_intr(dwc_otg_hcd->core_if);
++
++	// Overwrite with saved interrupts from fiq handler
++	if(fiq_split_enable)
++	{
++		local_fiq_disable();
++		haint.d32 = haint_saved.d32;
++		haint_saved.d32 = 0;
++		local_fiq_enable();
++	}
++
++	for (i = 0; i < dwc_otg_hcd->core_if->core_params->host_channels; i++) {
++		if (haint.b2.chint & (1 << i)) {
++			retval |= dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd, i);
++		}
++	}
++
++	return retval;
++}
++
++/**
++ * Gets the actual length of a transfer after the transfer halts. _halt_status
++ * holds the reason for the halt.
++ *
++ * For IN transfers where halt_status is DWC_OTG_HC_XFER_COMPLETE,
++ * *short_read is set to 1 upon return if less than the requested
++ * number of bytes were transferred. Otherwise, *short_read is set to 0 upon
++ * return. short_read may also be NULL on entry, in which case it remains
++ * unchanged.
++ */
++static uint32_t get_actual_xfer_length(dwc_hc_t * hc,
++				       dwc_otg_hc_regs_t * hc_regs,
++				       dwc_otg_qtd_t * qtd,
++				       dwc_otg_halt_status_e halt_status,
++				       int *short_read)
++{
++	hctsiz_data_t hctsiz;
++	uint32_t length;
++
++	if (short_read != NULL) {
++		*short_read = 0;
++	}
++	hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
++
++	if (halt_status == DWC_OTG_HC_XFER_COMPLETE) {
++		if (hc->ep_is_in) {
++			length = hc->xfer_len - hctsiz.b.xfersize;
++			if (short_read != NULL) {
++				*short_read = (hctsiz.b.xfersize != 0);
++			}
++		} else if (hc->qh->do_split) {
++			if(fiq_split_enable)
++				length = split_out_xfersize[hc->hc_num];
++			else
++				length = qtd->ssplit_out_xfer_count;
++		} else {
++			length = hc->xfer_len;
++		}
++	} else {
++		/*
++		 * Must use the hctsiz.pktcnt field to determine how much data
++		 * has been transferred. This field reflects the number of
++		 * packets that have been transferred via the USB. This is
++		 * always an integral number of packets if the transfer was
++		 * halted before its normal completion. (Can't use the
++		 * hctsiz.xfersize field because that reflects the number of
++		 * bytes transferred via the AHB, not the USB).
++		 */
++		length =
++		    (hc->start_pkt_count - hctsiz.b.pktcnt) * hc->max_packet;
++	}
++
++	return length;
++}
++
++/**
++ * Updates the state of the URB after a Transfer Complete interrupt on the
++ * host channel. Updates the actual_length field of the URB based on the
++ * number of bytes transferred via the host channel. Sets the URB status
++ * if the data transfer is finished.
++ *
++ * @return 1 if the data transfer specified by the URB is completely finished,
++ * 0 otherwise.
++ */
++static int update_urb_state_xfer_comp(dwc_hc_t * hc,
++				      dwc_otg_hc_regs_t * hc_regs,
++				      dwc_otg_hcd_urb_t * urb,
++				      dwc_otg_qtd_t * qtd)
++{
++	int xfer_done = 0;
++	int short_read = 0;
++
++	int xfer_length;
++
++	xfer_length = get_actual_xfer_length(hc, hc_regs, qtd,
++					     DWC_OTG_HC_XFER_COMPLETE,
++					     &short_read);
++
++	/* non DWORD-aligned buffer case handling. */
++	if (hc->align_buff && xfer_length && hc->ep_is_in) {
++		dwc_memcpy(urb->buf + urb->actual_length, hc->qh->dw_align_buf,
++			   xfer_length);
++	}
++
++	urb->actual_length += xfer_length;
++
++	if (xfer_length && (hc->ep_type == DWC_OTG_EP_TYPE_BULK) &&
++	    (urb->flags & URB_SEND_ZERO_PACKET)
++	    && (urb->actual_length == urb->length)
++	    && !(urb->length % hc->max_packet)) {
++		xfer_done = 0;
++	} else if (short_read || urb->actual_length >= urb->length) {
++		xfer_done = 1;
++		urb->status = 0;
++	}
++
++#ifdef DEBUG
++	{
++		hctsiz_data_t hctsiz;
++		hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
++		DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
++			    __func__, (hc->ep_is_in ? "IN" : "OUT"),
++			    hc->hc_num);
++		DWC_DEBUGPL(DBG_HCDV, "  hc->xfer_len %d\n", hc->xfer_len);
++		DWC_DEBUGPL(DBG_HCDV, "  hctsiz.xfersize %d\n",
++			    hctsiz.b.xfersize);
++		DWC_DEBUGPL(DBG_HCDV, "  urb->transfer_buffer_length %d\n",
++			    urb->length);
++		DWC_DEBUGPL(DBG_HCDV, "  urb->actual_length %d\n",
++			    urb->actual_length);
++		DWC_DEBUGPL(DBG_HCDV, "  short_read %d, xfer_done %d\n",
++			    short_read, xfer_done);
++	}
++#endif
++
++	return xfer_done;
++}
++
++/*
++ * Save the starting data toggle for the next transfer. The data toggle is
++ * saved in the QH for non-control transfers and it's saved in the QTD for
++ * control transfers.
++ */
++void dwc_otg_hcd_save_data_toggle(dwc_hc_t * hc,
++			     dwc_otg_hc_regs_t * hc_regs, dwc_otg_qtd_t * qtd)
++{
++	hctsiz_data_t hctsiz;
++	hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
++
++	if (hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) {
++		dwc_otg_qh_t *qh = hc->qh;
++		if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
++			qh->data_toggle = DWC_OTG_HC_PID_DATA0;
++		} else {
++			qh->data_toggle = DWC_OTG_HC_PID_DATA1;
++		}
++	} else {
++		if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
++			qtd->data_toggle = DWC_OTG_HC_PID_DATA0;
++		} else {
++			qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
++		}
++	}
++}
++
++/**
++ * Updates the state of an Isochronous URB when the transfer is stopped for
++ * any reason. The fields of the current entry in the frame descriptor array
++ * are set based on the transfer state and the input _halt_status. Completes
++ * the Isochronous URB if all the URB frames have been completed.
++ *
++ * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames remaining to be
++ * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_URB_COMPLETE.
++ */
++static dwc_otg_halt_status_e
++update_isoc_urb_state(dwc_otg_hcd_t * hcd,
++		      dwc_hc_t * hc,
++		      dwc_otg_hc_regs_t * hc_regs,
++		      dwc_otg_qtd_t * qtd, dwc_otg_halt_status_e halt_status)
++{
++	dwc_otg_hcd_urb_t *urb = qtd->urb;
++	dwc_otg_halt_status_e ret_val = halt_status;
++	struct dwc_otg_hcd_iso_packet_desc *frame_desc;
++
++	frame_desc = &urb->iso_descs[qtd->isoc_frame_index];
++	switch (halt_status) {
++	case DWC_OTG_HC_XFER_COMPLETE:
++		frame_desc->status = 0;
++		frame_desc->actual_length =
++		    get_actual_xfer_length(hc, hc_regs, qtd, halt_status, NULL);
++
++		/* non DWORD-aligned buffer case handling. */
++		if (hc->align_buff && frame_desc->actual_length && hc->ep_is_in) {
++			dwc_memcpy(urb->buf + frame_desc->offset + qtd->isoc_split_offset,
++				   hc->qh->dw_align_buf, frame_desc->actual_length);
++		}
++
++		break;
++	case DWC_OTG_HC_XFER_FRAME_OVERRUN:
++		urb->error_count++;
++		if (hc->ep_is_in) {
++			frame_desc->status = -DWC_E_NO_STREAM_RES;
++		} else {
++			frame_desc->status = -DWC_E_COMMUNICATION;
++		}
++		frame_desc->actual_length = 0;
++		break;
++	case DWC_OTG_HC_XFER_BABBLE_ERR:
++		urb->error_count++;
++		frame_desc->status = -DWC_E_OVERFLOW;
++		/* Don't need to update actual_length in this case. */
++		break;
++	case DWC_OTG_HC_XFER_XACT_ERR:
++		urb->error_count++;
++		frame_desc->status = -DWC_E_PROTOCOL;
++		frame_desc->actual_length =
++		    get_actual_xfer_length(hc, hc_regs, qtd, halt_status, NULL);
++
++		/* non DWORD-aligned buffer case handling. */
++		if (hc->align_buff && frame_desc->actual_length && hc->ep_is_in) {
++			dwc_memcpy(urb->buf + frame_desc->offset + qtd->isoc_split_offset,
++				   hc->qh->dw_align_buf, frame_desc->actual_length);
++		}
++		/* Skip whole frame */
++		if (hc->qh->do_split && (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) &&
++		    hc->ep_is_in && hcd->core_if->dma_enable) {
++			qtd->complete_split = 0;
++			qtd->isoc_split_offset = 0;
++		}
++
++		break;
++	default:
++		DWC_ASSERT(1, "Unhandled _halt_status (%d)\n", halt_status);
++		break;
++	}
++	if (++qtd->isoc_frame_index == urb->packet_count) {
++		/*
++		 * urb->status is not used for isoc transfers.
++		 * The individual frame_desc statuses are used instead.
++		 */
++		hcd->fops->complete(hcd, urb->priv, urb, 0);
++		ret_val = DWC_OTG_HC_XFER_URB_COMPLETE;
++	} else {
++		ret_val = DWC_OTG_HC_XFER_COMPLETE;
++	}
++	return ret_val;
++}
++
++/**
++ * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic
++ * QHs, removes the QH from the active non-periodic schedule. If any QTDs are
++ * still linked to the QH, the QH is added to the end of the inactive
++ * non-periodic schedule. For periodic QHs, removes the QH from the periodic
++ * schedule if no more QTDs are linked to the QH.
++ */
++static void deactivate_qh(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, int free_qtd)
++{
++	int continue_split = 0;
++	dwc_otg_qtd_t *qtd;
++
++	DWC_DEBUGPL(DBG_HCDV, "  %s(%p,%p,%d)\n", __func__, hcd, qh, free_qtd);
++
++	qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list);
++
++	if (qtd->complete_split) {
++		continue_split = 1;
++	} else if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID ||
++		   qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END) {
++		continue_split = 1;
++	}
++
++	if (free_qtd) {
++		dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh);
++		continue_split = 0;
++	}
++
++	qh->channel = NULL;
++	dwc_otg_hcd_qh_deactivate(hcd, qh, continue_split);
++}
++
++/**
++ * Releases a host channel for use by other transfers. Attempts to select and
++ * queue more transactions since at least one host channel is available.
++ *
++ * @param hcd The HCD state structure.
++ * @param hc The host channel to release.
++ * @param qtd The QTD associated with the host channel. This QTD may be freed
++ * if the transfer is complete or an error has occurred.
++ * @param halt_status Reason the channel is being released. This status
++ * determines the actions taken by this function.
++ */
++static void release_channel(dwc_otg_hcd_t * hcd,
++			    dwc_hc_t * hc,
++			    dwc_otg_qtd_t * qtd,
++			    dwc_otg_halt_status_e halt_status)
++{
++	dwc_otg_transaction_type_e tr_type;
++	int free_qtd;
++	dwc_irqflags_t flags;
++	dwc_spinlock_t *channel_lock = hcd->channel_lock;
++#ifdef FIQ_DEBUG
++	int endp = qtd->urb ? qtd->urb->pipe_info.ep_num : 0;
++#endif
++	int hog_port = 0;
++
++	DWC_DEBUGPL(DBG_HCDV, "  %s: channel %d, halt_status %d, xfer_len %d\n",
++		    __func__, hc->hc_num, halt_status, hc->xfer_len);
++
++	if(fiq_split_enable && hc->do_split) {
++		if(!hc->ep_is_in && hc->ep_type == UE_ISOCHRONOUS) {
++			if(hc->xact_pos == DWC_HCSPLIT_XACTPOS_MID ||
++					hc->xact_pos == DWC_HCSPLIT_XACTPOS_BEGIN) {
++				hog_port = 1;
++			}
++		}
++	}
++
++	switch (halt_status) {
++	case DWC_OTG_HC_XFER_URB_COMPLETE:
++		free_qtd = 1;
++		break;
++	case DWC_OTG_HC_XFER_AHB_ERR:
++	case DWC_OTG_HC_XFER_STALL:
++	case DWC_OTG_HC_XFER_BABBLE_ERR:
++		free_qtd = 1;
++		break;
++	case DWC_OTG_HC_XFER_XACT_ERR:
++		if (qtd->error_count >= 3) {
++			DWC_DEBUGPL(DBG_HCDV,
++				    "  Complete URB with transaction error\n");
++			free_qtd = 1;
++			qtd->urb->status = -DWC_E_PROTOCOL;
++			hcd->fops->complete(hcd, qtd->urb->priv,
++					    qtd->urb, -DWC_E_PROTOCOL);
++		} else {
++			free_qtd = 0;
++		}
++		break;
++	case DWC_OTG_HC_XFER_URB_DEQUEUE:
++		/*
++		 * The QTD has already been removed and the QH has been
++		 * deactivated. Don't want to do anything except release the
++		 * host channel and try to queue more transfers.
++		 */
++		goto cleanup;
++	case DWC_OTG_HC_XFER_NO_HALT_STATUS:
++		free_qtd = 0;
++		break;
++	case DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE:
++		DWC_DEBUGPL(DBG_HCDV,
++			"  Complete URB with I/O error\n");
++		free_qtd = 1;
++		qtd->urb->status = -DWC_E_IO;
++		hcd->fops->complete(hcd, qtd->urb->priv,
++			qtd->urb, -DWC_E_IO);
++		break;
++	default:
++		free_qtd = 0;
++		break;
++	}
++
++	deactivate_qh(hcd, hc->qh, free_qtd);
++
++cleanup:
++	/*
++	 * Release the host channel for use by other transfers. The cleanup
++	 * function clears the channel interrupt enables and conditions, so
++	 * there's no need to clear the Channel Halted interrupt separately.
++	 */
++	dwc_otg_hc_cleanup(hcd->core_if, hc);
++	DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry);
++
++	if (!microframe_schedule) {
++		switch (hc->ep_type) {
++		case DWC_OTG_EP_TYPE_CONTROL:
++		case DWC_OTG_EP_TYPE_BULK:
++			hcd->non_periodic_channels--;
++			break;
++
++		default:
++			/*
++			 * Don't release reservations for periodic channels here.
++			 * That's done when a periodic transfer is descheduled (i.e.
++			 * when the QH is removed from the periodic schedule).
++			 */
++			break;
++		}
++	} else {
++
++		DWC_SPINLOCK_IRQSAVE(channel_lock, &flags);
++		hcd->available_host_channels++;
++		fiq_print(FIQDBG_PORTHUB, "AHC = %d ", hcd->available_host_channels);
++		DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
++	}
++
++	if(fiq_split_enable && hc->do_split)
++	{
++		if(!(hcd->hub_port[hc->hub_addr] & (1 << hc->port_addr)))
++		{
++			fiq_print(FIQDBG_ERR, "PRTNOTAL");
++			//BUG();
++		}
++		if(!hog_port && (hc->ep_type == DWC_OTG_EP_TYPE_ISOC ||
++				hc->ep_type == DWC_OTG_EP_TYPE_INTR)) {
++			hcd->hub_port[hc->hub_addr] &= ~(1 << hc->port_addr);
++#ifdef FIQ_DEBUG
++			hcd->hub_port_alloc[hc->hub_addr * 16 + hc->port_addr] = -1;
++#endif
++			fiq_print(FIQDBG_PORTHUB, "H%dP%d:RR%d", hc->hub_addr, hc->port_addr, endp);
++		}
++	}
++
++	/* Try to queue more transfers now that there's a free channel. */
++	tr_type = dwc_otg_hcd_select_transactions(hcd);
++	if (tr_type != DWC_OTG_TRANSACTION_NONE) {
++		dwc_otg_hcd_queue_transactions(hcd, tr_type);
++	}
++}
++
++/**
++ * Halts a host channel. If the channel cannot be halted immediately because
++ * the request queue is full, this function ensures that the FIFO empty
++ * interrupt for the appropriate queue is enabled so that the halt request can
++ * be queued when there is space in the request queue.
++ *
++ * This function may also be called in DMA mode. In that case, the channel is
++ * simply released since the core always halts the channel automatically in
++ * DMA mode.
++ */
++static void halt_channel(dwc_otg_hcd_t * hcd,
++			 dwc_hc_t * hc,
++			 dwc_otg_qtd_t * qtd, dwc_otg_halt_status_e halt_status)
++{
++	if (hcd->core_if->dma_enable) {
++		release_channel(hcd, hc, qtd, halt_status);
++		return;
++	}
++
++	/* Slave mode processing... */
++	dwc_otg_hc_halt(hcd->core_if, hc, halt_status);
++
++	if (hc->halt_on_queue) {
++		gintmsk_data_t gintmsk = {.d32 = 0 };
++		dwc_otg_core_global_regs_t *global_regs;
++		global_regs = hcd->core_if->core_global_regs;
++
++		if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
++		    hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
++			/*
++			 * Make sure the Non-periodic Tx FIFO empty interrupt
++			 * is enabled so that the non-periodic schedule will
++			 * be processed.
++			 */
++			gintmsk.b.nptxfempty = 1;
++			DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32);
++		} else {
++			/*
++			 * Move the QH from the periodic queued schedule to
++			 * the periodic assigned schedule. This allows the
++			 * halt to be queued when the periodic schedule is
++			 * processed.
++			 */
++			DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned,
++					   &hc->qh->qh_list_entry);
++
++			/*
++			 * Make sure the Periodic Tx FIFO Empty interrupt is
++			 * enabled so that the periodic schedule will be
++			 * processed.
++			 */
++			gintmsk.b.ptxfempty = 1;
++			DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32);
++		}
++	}
++}
++
++/**
++ * Performs common cleanup for non-periodic transfers after a Transfer
++ * Complete interrupt. This function should be called after any endpoint type
++ * specific handling is finished to release the host channel.
++ */
++static void complete_non_periodic_xfer(dwc_otg_hcd_t * hcd,
++				       dwc_hc_t * hc,
++				       dwc_otg_hc_regs_t * hc_regs,
++				       dwc_otg_qtd_t * qtd,
++				       dwc_otg_halt_status_e halt_status)
++{
++	hcint_data_t hcint;
++
++	qtd->error_count = 0;
++
++	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++	if (hcint.b.nyet) {
++		/*
++		 * Got a NYET on the last transaction of the transfer. This
++		 * means that the endpoint should be in the PING state at the
++		 * beginning of the next transfer.
++		 */
++		hc->qh->ping_state = 1;
++		clear_hc_int(hc_regs, nyet);
++	}
++
++	/*
++	 * Always halt and release the host channel to make it available for
++	 * more transfers. There may still be more phases for a control
++	 * transfer or more data packets for a bulk transfer at this point,
++	 * but the host channel is still halted. A channel will be reassigned
++	 * to the transfer when the non-periodic schedule is processed after
++	 * the channel is released. This allows transactions to be queued
++	 * properly via dwc_otg_hcd_queue_transactions, which also enables the
++	 * Tx FIFO Empty interrupt if necessary.
++	 */
++	if (hc->ep_is_in) {
++		/*
++		 * IN transfers in Slave mode require an explicit disable to
++		 * halt the channel. (In DMA mode, this call simply releases
++		 * the channel.)
++		 */
++		halt_channel(hcd, hc, qtd, halt_status);
++	} else {
++		/*
++		 * The channel is automatically disabled by the core for OUT
++		 * transfers in Slave mode.
++		 */
++		release_channel(hcd, hc, qtd, halt_status);
++	}
++}
++
++/**
++ * Performs common cleanup for periodic transfers after a Transfer Complete
++ * interrupt. This function should be called after any endpoint type specific
++ * handling is finished to release the host channel.
++ */
++static void complete_periodic_xfer(dwc_otg_hcd_t * hcd,
++				   dwc_hc_t * hc,
++				   dwc_otg_hc_regs_t * hc_regs,
++				   dwc_otg_qtd_t * qtd,
++				   dwc_otg_halt_status_e halt_status)
++{
++	hctsiz_data_t hctsiz;
++	qtd->error_count = 0;
++
++	hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
++	if (!hc->ep_is_in || hctsiz.b.pktcnt == 0) {
++		/* Core halts channel in these cases. */
++		release_channel(hcd, hc, qtd, halt_status);
++	} else {
++		/* Flush any outstanding requests from the Tx queue. */
++		halt_channel(hcd, hc, qtd, halt_status);
++	}
++}
++
++static int32_t handle_xfercomp_isoc_split_in(dwc_otg_hcd_t * hcd,
++					     dwc_hc_t * hc,
++					     dwc_otg_hc_regs_t * hc_regs,
++					     dwc_otg_qtd_t * qtd)
++{
++	uint32_t len;
++	struct dwc_otg_hcd_iso_packet_desc *frame_desc;
++	frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index];
++
++	len = get_actual_xfer_length(hc, hc_regs, qtd,
++				     DWC_OTG_HC_XFER_COMPLETE, NULL);
++
++	if (!len) {
++		qtd->complete_split = 0;
++		qtd->isoc_split_offset = 0;
++		return 0;
++	}
++	frame_desc->actual_length += len;
++
++	if (hc->align_buff && len)
++		dwc_memcpy(qtd->urb->buf + frame_desc->offset +
++			   qtd->isoc_split_offset, hc->qh->dw_align_buf, len);
++	qtd->isoc_split_offset += len;
++
++	if (frame_desc->length == frame_desc->actual_length) {
++		frame_desc->status = 0;
++		qtd->isoc_frame_index++;
++		qtd->complete_split = 0;
++		qtd->isoc_split_offset = 0;
++	}
++
++	if (qtd->isoc_frame_index == qtd->urb->packet_count) {
++		hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0);
++		release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE);
++	} else {
++		release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS);
++	}
++
++	return 1;		/* Indicates that channel released */
++}
++
++/**
++ * Handles a host channel Transfer Complete interrupt. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t * hcd,
++				       dwc_hc_t * hc,
++				       dwc_otg_hc_regs_t * hc_regs,
++				       dwc_otg_qtd_t * qtd)
++{
++	int urb_xfer_done;
++	dwc_otg_halt_status_e halt_status = DWC_OTG_HC_XFER_COMPLETE;
++	dwc_otg_hcd_urb_t *urb = qtd->urb;
++	int pipe_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info);
++
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "Transfer Complete--\n", hc->hc_num);
++
++	if (hcd->core_if->dma_desc_enable) {
++		dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, halt_status);
++		if (pipe_type == UE_ISOCHRONOUS) {
++			/* Do not disable the interrupt, just clear it */
++			clear_hc_int(hc_regs, xfercomp);
++			return 1;
++		}
++		goto handle_xfercomp_done;
++	}
++
++	/*
++	 * Handle xfer complete on CSPLIT.
++	 */
++
++	if (hc->qh->do_split) {
++		if ((hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && hc->ep_is_in
++		    && hcd->core_if->dma_enable) {
++			if (qtd->complete_split
++			    && handle_xfercomp_isoc_split_in(hcd, hc, hc_regs,
++							     qtd))
++				goto handle_xfercomp_done;
++		} else {
++			qtd->complete_split = 0;
++		}
++	}
++
++	/* Update the QTD and URB states. */
++	switch (pipe_type) {
++	case UE_CONTROL:
++		switch (qtd->control_phase) {
++		case DWC_OTG_CONTROL_SETUP:
++			if (urb->length > 0) {
++				qtd->control_phase = DWC_OTG_CONTROL_DATA;
++			} else {
++				qtd->control_phase = DWC_OTG_CONTROL_STATUS;
++			}
++			DWC_DEBUGPL(DBG_HCDV,
++				    "  Control setup transaction done\n");
++			halt_status = DWC_OTG_HC_XFER_COMPLETE;
++			break;
++		case DWC_OTG_CONTROL_DATA:{
++				urb_xfer_done =
++				    update_urb_state_xfer_comp(hc, hc_regs, urb,
++							       qtd);
++				if (urb_xfer_done) {
++					qtd->control_phase =
++					    DWC_OTG_CONTROL_STATUS;
++					DWC_DEBUGPL(DBG_HCDV,
++						    "  Control data transfer done\n");
++				} else {
++					dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++				}
++				halt_status = DWC_OTG_HC_XFER_COMPLETE;
++				break;
++			}
++		case DWC_OTG_CONTROL_STATUS:
++			DWC_DEBUGPL(DBG_HCDV, "  Control transfer complete\n");
++			if (urb->status == -DWC_E_IN_PROGRESS) {
++				urb->status = 0;
++			}
++			hcd->fops->complete(hcd, urb->priv, urb, urb->status);
++			halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
++			break;
++		}
++
++		complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
++		break;
++	case UE_BULK:
++		DWC_DEBUGPL(DBG_HCDV, "  Bulk transfer complete\n");
++		urb_xfer_done =
++		    update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
++		if (urb_xfer_done) {
++			hcd->fops->complete(hcd, urb->priv, urb, urb->status);
++			halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
++		} else {
++			halt_status = DWC_OTG_HC_XFER_COMPLETE;
++		}
++
++		dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++		complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
++		break;
++	case UE_INTERRUPT:
++		DWC_DEBUGPL(DBG_HCDV, "  Interrupt transfer complete\n");
++		urb_xfer_done =
++			update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
++
++		/*
++		 * Interrupt URB is done on the first transfer complete
++		 * interrupt.
++		 */
++		if (urb_xfer_done) {
++				hcd->fops->complete(hcd, urb->priv, urb, urb->status);
++				halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
++		} else {
++				halt_status = DWC_OTG_HC_XFER_COMPLETE;
++		}
++
++		dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++		complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
++		break;
++	case UE_ISOCHRONOUS:
++		DWC_DEBUGPL(DBG_HCDV, "  Isochronous transfer complete\n");
++		if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_ALL) {
++			halt_status =
++			    update_isoc_urb_state(hcd, hc, hc_regs, qtd,
++						  DWC_OTG_HC_XFER_COMPLETE);
++		}
++		complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
++		break;
++	}
++
++handle_xfercomp_done:
++	disable_hc_int(hc_regs, xfercompl);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel STALL interrupt. This handler may be called in
++ * either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_stall_intr(dwc_otg_hcd_t * hcd,
++				    dwc_hc_t * hc,
++				    dwc_otg_hc_regs_t * hc_regs,
++				    dwc_otg_qtd_t * qtd)
++{
++	dwc_otg_hcd_urb_t *urb = qtd->urb;
++	int pipe_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info);
++
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "STALL Received--\n", hc->hc_num);
++
++	if (hcd->core_if->dma_desc_enable) {
++		dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, DWC_OTG_HC_XFER_STALL);
++		goto handle_stall_done;
++	}
++
++	if (pipe_type == UE_CONTROL) {
++		hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_PIPE);
++	}
++
++	if (pipe_type == UE_BULK || pipe_type == UE_INTERRUPT) {
++		hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_PIPE);
++		/*
++		 * USB protocol requires resetting the data toggle for bulk
++		 * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT)
++		 * setup command is issued to the endpoint. Anticipate the
++		 * CLEAR_FEATURE command since a STALL has occurred and reset
++		 * the data toggle now.
++		 */
++		hc->qh->data_toggle = 0;
++	}
++
++	halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_STALL);
++
++handle_stall_done:
++	disable_hc_int(hc_regs, stall);
++
++	return 1;
++}
++
++/*
++ * Updates the state of the URB when a transfer has been stopped due to an
++ * abnormal condition before the transfer completes. Modifies the
++ * actual_length field of the URB to reflect the number of bytes that have
++ * actually been transferred via the host channel.
++ */
++static void update_urb_state_xfer_intr(dwc_hc_t * hc,
++				       dwc_otg_hc_regs_t * hc_regs,
++				       dwc_otg_hcd_urb_t * urb,
++				       dwc_otg_qtd_t * qtd,
++				       dwc_otg_halt_status_e halt_status)
++{
++	uint32_t bytes_transferred = get_actual_xfer_length(hc, hc_regs, qtd,
++							    halt_status, NULL);
++	/* non DWORD-aligned buffer case handling. */
++	if (hc->align_buff && bytes_transferred && hc->ep_is_in) {
++		dwc_memcpy(urb->buf + urb->actual_length, hc->qh->dw_align_buf,
++			   bytes_transferred);
++	}
++
++	urb->actual_length += bytes_transferred;
++
++#ifdef DEBUG
++	{
++		hctsiz_data_t hctsiz;
++		hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
++		DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
++			    __func__, (hc->ep_is_in ? "IN" : "OUT"),
++			    hc->hc_num);
++		DWC_DEBUGPL(DBG_HCDV, "  hc->start_pkt_count %d\n",
++			    hc->start_pkt_count);
++		DWC_DEBUGPL(DBG_HCDV, "  hctsiz.pktcnt %d\n", hctsiz.b.pktcnt);
++		DWC_DEBUGPL(DBG_HCDV, "  hc->max_packet %d\n", hc->max_packet);
++		DWC_DEBUGPL(DBG_HCDV, "  bytes_transferred %d\n",
++			    bytes_transferred);
++		DWC_DEBUGPL(DBG_HCDV, "  urb->actual_length %d\n",
++			    urb->actual_length);
++		DWC_DEBUGPL(DBG_HCDV, "  urb->transfer_buffer_length %d\n",
++			    urb->length);
++	}
++#endif
++}
++
++/**
++ * Handles a host channel NAK interrupt. This handler may be called in either
++ * DMA mode or Slave mode.
++ */
++static int32_t handle_hc_nak_intr(dwc_otg_hcd_t * hcd,
++				  dwc_hc_t * hc,
++				  dwc_otg_hc_regs_t * hc_regs,
++				  dwc_otg_qtd_t * qtd)
++{
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "NAK Received--\n", hc->hc_num);
++
++	/*
++	 * When we get bulk NAKs then remember this so we holdoff on this qh until
++	 * the beginning of the next frame
++	 */
++	switch(dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
++		case UE_BULK:
++		case UE_CONTROL:
++		if (nak_holdoff_enable)
++			hc->qh->nak_frame = dwc_otg_hcd_get_frame_number(hcd);
++	}
++
++	/*
++	 * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and
++	 * interrupt.  Re-start the SSPLIT transfer.
++	 */
++	if (hc->do_split) {
++		if (hc->complete_split) {
++			qtd->error_count = 0;
++		}
++		qtd->complete_split = 0;
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
++		goto handle_nak_done;
++	}
++
++	switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
++	case UE_CONTROL:
++	case UE_BULK:
++		if (hcd->core_if->dma_enable && hc->ep_is_in) {
++			/*
++			 * NAK interrupts are enabled on bulk/control IN
++			 * transfers in DMA mode for the sole purpose of
++			 * resetting the error count after a transaction error
++			 * occurs. The core will continue transferring data.
++			 * Disable other interrupts unmasked for the same
++			 * reason.
++			 */
++			disable_hc_int(hc_regs, datatglerr);
++			disable_hc_int(hc_regs, ack);
++			qtd->error_count = 0;
++			goto handle_nak_done;
++		}
++
++		/*
++		 * NAK interrupts normally occur during OUT transfers in DMA
++		 * or Slave mode. For IN transfers, more requests will be
++		 * queued as request queue space is available.
++		 */
++		qtd->error_count = 0;
++
++		if (!hc->qh->ping_state) {
++			update_urb_state_xfer_intr(hc, hc_regs,
++						   qtd->urb, qtd,
++						   DWC_OTG_HC_XFER_NAK);
++			dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++
++			if (hc->speed == DWC_OTG_EP_SPEED_HIGH)
++				hc->qh->ping_state = 1;
++		}
++
++		/*
++		 * Halt the channel so the transfer can be re-started from
++		 * the appropriate point or the PING protocol will
++		 * start/continue.
++		 */
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
++		break;
++	case UE_INTERRUPT:
++		qtd->error_count = 0;
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
++		break;
++	case UE_ISOCHRONOUS:
++		/* Should never get called for isochronous transfers. */
++		DWC_ASSERT(1, "NACK interrupt for ISOC transfer\n");
++		break;
++	}
++
++handle_nak_done:
++	disable_hc_int(hc_regs, nak);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel ACK interrupt. This interrupt is enabled when
++ * performing the PING protocol in Slave mode, when errors occur during
++ * either Slave mode or DMA mode, and during Start Split transactions.
++ */
++static int32_t handle_hc_ack_intr(dwc_otg_hcd_t * hcd,
++				  dwc_hc_t * hc,
++				  dwc_otg_hc_regs_t * hc_regs,
++				  dwc_otg_qtd_t * qtd)
++{
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "ACK Received--\n", hc->hc_num);
++
++	if (hc->do_split) {
++		/*
++		 * Handle ACK on SSPLIT.
++		 * ACK should not occur in CSPLIT.
++		 */
++		if (!hc->ep_is_in && hc->data_pid_start != DWC_OTG_HC_PID_SETUP) {
++			qtd->ssplit_out_xfer_count = hc->xfer_len;
++		}
++		if (!(hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in)) {
++			/* Don't need complete for isochronous out transfers. */
++			qtd->complete_split = 1;
++		}
++
++		/* ISOC OUT */
++		if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) {
++			switch (hc->xact_pos) {
++			case DWC_HCSPLIT_XACTPOS_ALL:
++				break;
++			case DWC_HCSPLIT_XACTPOS_END:
++				qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
++				qtd->isoc_split_offset = 0;
++				break;
++			case DWC_HCSPLIT_XACTPOS_BEGIN:
++			case DWC_HCSPLIT_XACTPOS_MID:
++				/*
++				 * For BEGIN or MID, calculate the length for
++				 * the next microframe to determine the correct
++				 * SSPLIT token, either MID or END.
++				 */
++				{
++					struct dwc_otg_hcd_iso_packet_desc
++					*frame_desc;
++
++					frame_desc =
++					    &qtd->urb->
++					    iso_descs[qtd->isoc_frame_index];
++					qtd->isoc_split_offset += 188;
++
++					if ((frame_desc->length -
++					     qtd->isoc_split_offset) <= 188) {
++						qtd->isoc_split_pos =
++						    DWC_HCSPLIT_XACTPOS_END;
++					} else {
++						qtd->isoc_split_pos =
++						    DWC_HCSPLIT_XACTPOS_MID;
++					}
++
++				}
++				break;
++			}
++		} else {
++			halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK);
++		}
++	} else {
++		/*
++		 * An unmasked ACK on a non-split DMA transaction is
++		 * for the sole purpose of resetting error counts. Disable other
++		 * interrupts unmasked for the same reason.
++		 */
++		if(hcd->core_if->dma_enable) {
++			disable_hc_int(hc_regs, datatglerr);
++			disable_hc_int(hc_regs, nak);
++		}
++		qtd->error_count = 0;
++
++		if (hc->qh->ping_state) {
++			hc->qh->ping_state = 0;
++			/*
++			 * Halt the channel so the transfer can be re-started
++			 * from the appropriate point. This only happens in
++			 * Slave mode. In DMA mode, the ping_state is cleared
++			 * when the transfer is started because the core
++			 * automatically executes the PING, then the transfer.
++			 */
++			halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK);
++		}
++	}
++
++	/*
++	 * If the ACK occurred when _not_ in the PING state, let the channel
++	 * continue transferring data after clearing the error count.
++	 */
++
++	disable_hc_int(hc_regs, ack);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel NYET interrupt. This interrupt should only occur on
++ * Bulk and Control OUT endpoints and for complete split transactions. If a
++ * NYET occurs at the same time as a Transfer Complete interrupt, it is
++ * handled in the xfercomp interrupt handler, not here. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t * hcd,
++				   dwc_hc_t * hc,
++				   dwc_otg_hc_regs_t * hc_regs,
++				   dwc_otg_qtd_t * qtd)
++{
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "NYET Received--\n", hc->hc_num);
++
++	/*
++	 * NYET on CSPLIT
++	 * re-do the CSPLIT immediately on non-periodic
++	 */
++	if (hc->do_split && hc->complete_split) {
++		if (hc->ep_is_in && (hc->ep_type == DWC_OTG_EP_TYPE_ISOC)
++		    && hcd->core_if->dma_enable) {
++			qtd->complete_split = 0;
++			qtd->isoc_split_offset = 0;
++			if (++qtd->isoc_frame_index == qtd->urb->packet_count) {
++				hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0);
++				release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE);
++			}
++			else
++				release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS);
++			goto handle_nyet_done;
++		}
++
++		if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++		    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++			int frnum = dwc_otg_hcd_get_frame_number(hcd);
++
++			// With the FIQ running we only ever see the failed NYET
++			if (dwc_full_frame_num(frnum) !=
++			    dwc_full_frame_num(hc->qh->sched_frame) ||
++			    fiq_split_enable) {
++				/*
++				 * No longer in the same full speed frame.
++				 * Treat this as a transaction error.
++				 */
++#if 0
++				/** @todo Fix system performance so this can
++				 * be treated as an error. Right now complete
++				 * splits cannot be scheduled precisely enough
++				 * due to other system activity, so this error
++				 * occurs regularly in Slave mode.
++				 */
++				qtd->error_count++;
++#endif
++				qtd->complete_split = 0;
++				halt_channel(hcd, hc, qtd,
++					     DWC_OTG_HC_XFER_XACT_ERR);
++				/** @todo add support for isoc release */
++				goto handle_nyet_done;
++			}
++		}
++
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET);
++		goto handle_nyet_done;
++	}
++
++	hc->qh->ping_state = 1;
++	qtd->error_count = 0;
++
++	update_urb_state_xfer_intr(hc, hc_regs, qtd->urb, qtd,
++				   DWC_OTG_HC_XFER_NYET);
++	dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++
++	/*
++	 * Halt the channel and re-start the transfer so the PING
++	 * protocol will start.
++	 */
++	halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET);
++
++handle_nyet_done:
++	disable_hc_int(hc_regs, nyet);
++	return 1;
++}
++
++/**
++ * Handles a host channel babble interrupt. This handler may be called in
++ * either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_babble_intr(dwc_otg_hcd_t * hcd,
++				     dwc_hc_t * hc,
++				     dwc_otg_hc_regs_t * hc_regs,
++				     dwc_otg_qtd_t * qtd)
++{
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "Babble Error--\n", hc->hc_num);
++
++	if (hcd->core_if->dma_desc_enable) {
++		dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs,
++					       DWC_OTG_HC_XFER_BABBLE_ERR);
++		goto handle_babble_done;
++	}
++
++	if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
++		hcd->fops->complete(hcd, qtd->urb->priv,
++				    qtd->urb, -DWC_E_OVERFLOW);
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_BABBLE_ERR);
++	} else {
++		dwc_otg_halt_status_e halt_status;
++		halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
++						    DWC_OTG_HC_XFER_BABBLE_ERR);
++		halt_channel(hcd, hc, qtd, halt_status);
++	}
++
++handle_babble_done:
++	disable_hc_int(hc_regs, bblerr);
++	return 1;
++}
++
++/**
++ * Handles a host channel AHB error interrupt. This handler is only called in
++ * DMA mode.
++ */
++static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t * hcd,
++				     dwc_hc_t * hc,
++				     dwc_otg_hc_regs_t * hc_regs,
++				     dwc_otg_qtd_t * qtd)
++{
++	hcchar_data_t hcchar;
++	hcsplt_data_t hcsplt;
++	hctsiz_data_t hctsiz;
++	uint32_t hcdma;
++	char *pipetype, *speed;
++
++	dwc_otg_hcd_urb_t *urb = qtd->urb;
++
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "AHB Error--\n", hc->hc_num);
++
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt);
++	hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
++	hcdma = DWC_READ_REG32(&hc_regs->hcdma);
++
++	DWC_ERROR("AHB ERROR, Channel %d\n", hc->hc_num);
++	DWC_ERROR("  hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
++	DWC_ERROR("  hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n");
++	DWC_ERROR("  Device address: %d\n",
++		  dwc_otg_hcd_get_dev_addr(&urb->pipe_info));
++	DWC_ERROR("  Endpoint: %d, %s\n",
++		  dwc_otg_hcd_get_ep_num(&urb->pipe_info),
++		  (dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT"));
++
++	switch (dwc_otg_hcd_get_pipe_type(&urb->pipe_info)) {
++	case UE_CONTROL:
++		pipetype = "CONTROL";
++		break;
++	case UE_BULK:
++		pipetype = "BULK";
++		break;
++	case UE_INTERRUPT:
++		pipetype = "INTERRUPT";
++		break;
++	case UE_ISOCHRONOUS:
++		pipetype = "ISOCHRONOUS";
++		break;
++	default:
++		pipetype = "UNKNOWN";
++		break;
++	}
++
++	DWC_ERROR("  Endpoint type: %s\n", pipetype);
++
++	switch (hc->speed) {
++	case DWC_OTG_EP_SPEED_HIGH:
++		speed = "HIGH";
++		break;
++	case DWC_OTG_EP_SPEED_FULL:
++		speed = "FULL";
++		break;
++	case DWC_OTG_EP_SPEED_LOW:
++		speed = "LOW";
++		break;
++	default:
++		speed = "UNKNOWN";
++		break;
++	};
++
++	DWC_ERROR("  Speed: %s\n", speed);
++
++	DWC_ERROR("  Max packet size: %d\n",
++		  dwc_otg_hcd_get_mps(&urb->pipe_info));
++	DWC_ERROR("  Data buffer length: %d\n", urb->length);
++	DWC_ERROR("  Transfer buffer: %p, Transfer DMA: %p\n",
++		  urb->buf, (void *)urb->dma);
++	DWC_ERROR("  Setup buffer: %p, Setup DMA: %p\n",
++		  urb->setup_packet, (void *)urb->setup_dma);
++	DWC_ERROR("  Interval: %d\n", urb->interval);
++
++	/* Core haltes the channel for Descriptor DMA mode */
++	if (hcd->core_if->dma_desc_enable) {
++		dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs,
++					       DWC_OTG_HC_XFER_AHB_ERR);
++		goto handle_ahberr_done;
++	}
++
++	hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_IO);
++
++	/*
++	 * Force a channel halt. Don't call halt_channel because that won't
++	 * write to the HCCHARn register in DMA mode to force the halt.
++	 */
++	dwc_otg_hc_halt(hcd->core_if, hc, DWC_OTG_HC_XFER_AHB_ERR);
++handle_ahberr_done:
++	disable_hc_int(hc_regs, ahberr);
++	return 1;
++}
++
++/**
++ * Handles a host channel transaction error interrupt. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t * hcd,
++				      dwc_hc_t * hc,
++				      dwc_otg_hc_regs_t * hc_regs,
++				      dwc_otg_qtd_t * qtd)
++{
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "Transaction Error--\n", hc->hc_num);
++
++	if (hcd->core_if->dma_desc_enable) {
++		dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs,
++					       DWC_OTG_HC_XFER_XACT_ERR);
++		goto handle_xacterr_done;
++	}
++
++	switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
++	case UE_CONTROL:
++	case UE_BULK:
++		qtd->error_count++;
++		if (!hc->qh->ping_state) {
++
++			update_urb_state_xfer_intr(hc, hc_regs,
++						   qtd->urb, qtd,
++						   DWC_OTG_HC_XFER_XACT_ERR);
++			dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++			if (!hc->ep_is_in && hc->speed == DWC_OTG_EP_SPEED_HIGH) {
++				hc->qh->ping_state = 1;
++			}
++		}
++
++		/*
++		 * Halt the channel so the transfer can be re-started from
++		 * the appropriate point or the PING protocol will start.
++		 */
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
++		break;
++	case UE_INTERRUPT:
++		qtd->error_count++;
++		if (hc->do_split && hc->complete_split) {
++			qtd->complete_split = 0;
++		}
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
++		break;
++	case UE_ISOCHRONOUS:
++		{
++			dwc_otg_halt_status_e halt_status;
++			halt_status =
++			    update_isoc_urb_state(hcd, hc, hc_regs, qtd,
++						  DWC_OTG_HC_XFER_XACT_ERR);
++
++			halt_channel(hcd, hc, qtd, halt_status);
++		}
++		break;
++	}
++handle_xacterr_done:
++	disable_hc_int(hc_regs, xacterr);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel frame overrun interrupt. This handler may be called
++ * in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t * hcd,
++				       dwc_hc_t * hc,
++				       dwc_otg_hc_regs_t * hc_regs,
++				       dwc_otg_qtd_t * qtd)
++{
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "Frame Overrun--\n", hc->hc_num);
++
++	switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
++	case UE_CONTROL:
++	case UE_BULK:
++		break;
++	case UE_INTERRUPT:
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_FRAME_OVERRUN);
++		break;
++	case UE_ISOCHRONOUS:
++		{
++			dwc_otg_halt_status_e halt_status;
++			halt_status =
++			    update_isoc_urb_state(hcd, hc, hc_regs, qtd,
++						  DWC_OTG_HC_XFER_FRAME_OVERRUN);
++
++			halt_channel(hcd, hc, qtd, halt_status);
++		}
++		break;
++	}
++
++	disable_hc_int(hc_regs, frmovrun);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel data toggle error interrupt. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t * hcd,
++					 dwc_hc_t * hc,
++					 dwc_otg_hc_regs_t * hc_regs,
++					 dwc_otg_qtd_t * qtd)
++{
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		"Data Toggle Error on %s transfer--\n",
++		hc->hc_num, (hc->ep_is_in ? "IN" : "OUT"));
++
++	/* Data toggles on split transactions cause the hc to halt.
++	 * restart transfer */
++	if(hc->qh->do_split)
++	{
++		qtd->error_count++;
++		dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++		update_urb_state_xfer_intr(hc, hc_regs,
++			qtd->urb, qtd, DWC_OTG_HC_XFER_XACT_ERR);
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
++	} else if (hc->ep_is_in) {
++		/* An unmasked data toggle error on a non-split DMA transaction is
++		 * for the sole purpose of resetting error counts. Disable other
++		 * interrupts unmasked for the same reason.
++		 */
++		if(hcd->core_if->dma_enable) {
++			disable_hc_int(hc_regs, ack);
++			disable_hc_int(hc_regs, nak);
++		}
++		qtd->error_count = 0;
++	}
++
++	disable_hc_int(hc_regs, datatglerr);
++
++	return 1;
++}
++
++#ifdef DEBUG
++/**
++ * This function is for debug only. It checks that a valid halt status is set
++ * and that HCCHARn.chdis is clear. If there's a problem, corrective action is
++ * taken and a warning is issued.
++ * @return 1 if halt status is ok, 0 otherwise.
++ */
++static inline int halt_status_ok(dwc_otg_hcd_t * hcd,
++				 dwc_hc_t * hc,
++				 dwc_otg_hc_regs_t * hc_regs,
++				 dwc_otg_qtd_t * qtd)
++{
++	hcchar_data_t hcchar;
++	hctsiz_data_t hctsiz;
++	hcint_data_t hcint;
++	hcintmsk_data_t hcintmsk;
++	hcsplt_data_t hcsplt;
++
++	if (hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS) {
++		/*
++		 * This code is here only as a check. This condition should
++		 * never happen. Ignore the halt if it does occur.
++		 */
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++		hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
++		hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++		hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk);
++		hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt);
++		DWC_WARN
++		    ("%s: hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS, "
++		     "channel %d, hcchar 0x%08x, hctsiz 0x%08x, "
++		     "hcint 0x%08x, hcintmsk 0x%08x, "
++		     "hcsplt 0x%08x, qtd->complete_split %d\n", __func__,
++		     hc->hc_num, hcchar.d32, hctsiz.d32, hcint.d32,
++		     hcintmsk.d32, hcsplt.d32, qtd->complete_split);
++
++		DWC_WARN("%s: no halt status, channel %d, ignoring interrupt\n",
++			 __func__, hc->hc_num);
++		DWC_WARN("\n");
++		clear_hc_int(hc_regs, chhltd);
++		return 0;
++	}
++
++	/*
++	 * This code is here only as a check. hcchar.chdis should
++	 * never be set when the halt interrupt occurs. Halt the
++	 * channel again if it does occur.
++	 */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	if (hcchar.b.chdis) {
++		DWC_WARN("%s: hcchar.chdis set unexpectedly, "
++			 "hcchar 0x%08x, trying to halt again\n",
++			 __func__, hcchar.d32);
++		clear_hc_int(hc_regs, chhltd);
++		hc->halt_pending = 0;
++		halt_channel(hcd, hc, qtd, hc->halt_status);
++		return 0;
++	}
++
++	return 1;
++}
++#endif
++
++/**
++ * Handles a host Channel Halted interrupt in DMA mode. This handler
++ * determines the reason the channel halted and proceeds accordingly.
++ */
++static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t * hcd,
++				      dwc_hc_t * hc,
++				      dwc_otg_hc_regs_t * hc_regs,
++				      dwc_otg_qtd_t * qtd,
++				      hcint_data_t hcint,
++				      hcintmsk_data_t hcintmsk)
++{
++	int out_nak_enh = 0;
++
++	/* For core with OUT NAK enhancement, the flow for high-
++	 * speed CONTROL/BULK OUT is handled a little differently.
++	 */
++	if (hcd->core_if->snpsid >= OTG_CORE_REV_2_71a) {
++		if (hc->speed == DWC_OTG_EP_SPEED_HIGH && !hc->ep_is_in &&
++		    (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
++		     hc->ep_type == DWC_OTG_EP_TYPE_BULK)) {
++			out_nak_enh = 1;
++		}
++	}
++
++	if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
++	    (hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR
++	     && !hcd->core_if->dma_desc_enable)) {
++		/*
++		 * Just release the channel. A dequeue can happen on a
++		 * transfer timeout. In the case of an AHB Error, the channel
++		 * was forced to halt because there's no way to gracefully
++		 * recover.
++		 */
++		if (hcd->core_if->dma_desc_enable)
++			dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs,
++						       hc->halt_status);
++		else
++			release_channel(hcd, hc, qtd, hc->halt_status);
++		return;
++	}
++
++	/* Read the HCINTn register to determine the cause for the halt. */
++	if(!fiq_split_enable)
++	{
++		hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++		hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk);
++	}
++
++	if (hcint.b.xfercomp) {
++		/** @todo This is here because of a possible hardware bug.  Spec
++		 * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT
++		 * interrupt w/ACK bit set should occur, but I only see the
++		 * XFERCOMP bit, even with it masked out.  This is a workaround
++		 * for that behavior.  Should fix this when hardware is fixed.
++		 */
++		if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) {
++			handle_hc_ack_intr(hcd, hc, hc_regs, qtd);
++		}
++		handle_hc_xfercomp_intr(hcd, hc, hc_regs, qtd);
++	} else if (hcint.b.stall) {
++		handle_hc_stall_intr(hcd, hc, hc_regs, qtd);
++	} else if (hcint.b.xacterr && !hcd->core_if->dma_desc_enable) {
++		if (out_nak_enh) {
++			if (hcint.b.nyet || hcint.b.nak || hcint.b.ack) {
++				DWC_DEBUGPL(DBG_HCD, "XactErr with NYET/NAK/ACK\n");
++				qtd->error_count = 0;
++			} else {
++				DWC_DEBUGPL(DBG_HCD, "XactErr without NYET/NAK/ACK\n");
++			}
++		}
++
++		/*
++		 * Must handle xacterr before nak or ack. Could get a xacterr
++		 * at the same time as either of these on a BULK/CONTROL OUT
++		 * that started with a PING. The xacterr takes precedence.
++		 */
++		handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd);
++	} else if (hcint.b.xcs_xact && hcd->core_if->dma_desc_enable) {
++		handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd);
++	} else if (hcint.b.ahberr && hcd->core_if->dma_desc_enable) {
++		handle_hc_ahberr_intr(hcd, hc, hc_regs, qtd);
++	} else if (hcint.b.bblerr) {
++		handle_hc_babble_intr(hcd, hc, hc_regs, qtd);
++	} else if (hcint.b.frmovrun) {
++		handle_hc_frmovrun_intr(hcd, hc, hc_regs, qtd);
++	} else if (hcint.b.datatglerr) {
++		handle_hc_datatglerr_intr(hcd, hc, hc_regs, qtd);
++	} else if (!out_nak_enh) {
++		if (hcint.b.nyet) {
++			/*
++			 * Must handle nyet before nak or ack. Could get a nyet at the
++			 * same time as either of those on a BULK/CONTROL OUT that
++			 * started with a PING. The nyet takes precedence.
++			 */
++			handle_hc_nyet_intr(hcd, hc, hc_regs, qtd);
++		} else if (hcint.b.nak && !hcintmsk.b.nak) {
++			/*
++			 * If nak is not masked, it's because a non-split IN transfer
++			 * is in an error state. In that case, the nak is handled by
++			 * the nak interrupt handler, not here. Handle nak here for
++			 * BULK/CONTROL OUT transfers, which halt on a NAK to allow
++			 * rewinding the buffer pointer.
++			 */
++			handle_hc_nak_intr(hcd, hc, hc_regs, qtd);
++		} else if (hcint.b.ack && !hcintmsk.b.ack) {
++			/*
++			 * If ack is not masked, it's because a non-split IN transfer
++			 * is in an error state. In that case, the ack is handled by
++			 * the ack interrupt handler, not here. Handle ack here for
++			 * split transfers. Start splits halt on ACK.
++			 */
++			handle_hc_ack_intr(hcd, hc, hc_regs, qtd);
++		} else {
++			if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++			    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++				/*
++				 * A periodic transfer halted with no other channel
++				 * interrupts set. Assume it was halted by the core
++				 * because it could not be completed in its scheduled
++				 * (micro)frame.
++				 */
++#ifdef DEBUG
++				DWC_PRINTF
++				    ("%s: Halt channel %d (assume incomplete periodic transfer)\n",
++				     __func__, hc->hc_num);
++#endif
++				halt_channel(hcd, hc, qtd,
++					     DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE);
++			} else {
++				DWC_ERROR
++				    ("%s: Channel %d, DMA Mode -- ChHltd set, but reason "
++				     "for halting is unknown, hcint 0x%08x, intsts 0x%08x\n",
++				     __func__, hc->hc_num, hcint.d32,
++				     DWC_READ_REG32(&hcd->
++						    core_if->core_global_regs->
++						    gintsts));
++				/* Failthrough: use 3-strikes rule */
++				qtd->error_count++;
++				dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++				update_urb_state_xfer_intr(hc, hc_regs,
++					   qtd->urb, qtd, DWC_OTG_HC_XFER_XACT_ERR);
++				halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
++			}
++
++		}
++	} else {
++		DWC_PRINTF("NYET/NAK/ACK/other in non-error case, 0x%08x\n",
++			   hcint.d32);
++		/* Failthrough: use 3-strikes rule */
++		qtd->error_count++;
++		dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++		update_urb_state_xfer_intr(hc, hc_regs,
++			   qtd->urb, qtd, DWC_OTG_HC_XFER_XACT_ERR);
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
++	}
++}
++
++/**
++ * Handles a host channel Channel Halted interrupt.
++ *
++ * In slave mode, this handler is called only when the driver specifically
++ * requests a halt. This occurs during handling other host channel interrupts
++ * (e.g. nak, xacterr, stall, nyet, etc.).
++ *
++ * In DMA mode, this is the interrupt that occurs when the core has finished
++ * processing a transfer on a channel. Other host channel interrupts (except
++ * ahberr) are disabled in DMA mode.
++ */
++static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t * hcd,
++				     dwc_hc_t * hc,
++				     dwc_otg_hc_regs_t * hc_regs,
++				     dwc_otg_qtd_t * qtd,
++				     hcint_data_t hcint,
++				     hcintmsk_data_t hcintmsk)
++{
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "Channel Halted--\n", hc->hc_num);
++
++	if (hcd->core_if->dma_enable) {
++		handle_hc_chhltd_intr_dma(hcd, hc, hc_regs, qtd, hcint, hcintmsk);
++	} else {
++#ifdef DEBUG
++		if (!halt_status_ok(hcd, hc, hc_regs, qtd)) {
++			return 1;
++		}
++#endif
++		release_channel(hcd, hc, qtd, hc->halt_status);
++	}
++
++	return 1;
++}
++
++/** Handles interrupt for a specific Host Channel */
++int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t * dwc_otg_hcd, uint32_t num)
++{
++	int retval = 0;
++	hcint_data_t hcint, hcint_orig;
++	hcintmsk_data_t hcintmsk;
++	dwc_hc_t *hc;
++	dwc_otg_hc_regs_t *hc_regs;
++	dwc_otg_qtd_t *qtd;
++
++	DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", num);
++
++	hc = dwc_otg_hcd->hc_ptr_array[num];
++	hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[num];
++	if(hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) {
++		/* We are responding to a channel disable. Driver
++		 * state is cleared - our qtd has gone away.
++		 */
++		release_channel(dwc_otg_hcd, hc, NULL, hc->halt_status);
++		return 1;
++	}
++	qtd = DWC_CIRCLEQ_FIRST(&hc->qh->qtd_list);
++
++	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++	hcint_orig = hcint;
++	hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk);
++	DWC_DEBUGPL(DBG_HCDV,
++		    "  hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
++		    hcint.d32, hcintmsk.d32, (hcint.d32 & hcintmsk.d32));
++	hcint.d32 = hcint.d32 & hcintmsk.d32;
++
++	if(fiq_split_enable)
++	{
++		// replace with the saved interrupts from the fiq handler
++		local_fiq_disable();
++		hcint_orig.d32 = hcint_saved[num].d32;
++		hcint.d32 = hcint_orig.d32 & hcintmsk_saved[num].d32;
++		hcint_saved[num].d32 = 0;
++		local_fiq_enable();
++	}
++
++	if (!dwc_otg_hcd->core_if->dma_enable) {
++		if (hcint.b.chhltd && hcint.d32 != 0x2) {
++			hcint.b.chhltd = 0;
++		}
++	}
++
++	if (hcint.b.xfercomp) {
++		retval |=
++		    handle_hc_xfercomp_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++		/*
++		 * If NYET occurred at same time as Xfer Complete, the NYET is
++		 * handled by the Xfer Complete interrupt handler. Don't want
++		 * to call the NYET interrupt handler in this case.
++		 */
++		hcint.b.nyet = 0;
++	}
++	if (hcint.b.chhltd) {
++		retval |= handle_hc_chhltd_intr(dwc_otg_hcd, hc, hc_regs, qtd, hcint_orig, hcintmsk_saved[num]);
++	}
++	if (hcint.b.ahberr) {
++		retval |= handle_hc_ahberr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.stall) {
++		retval |= handle_hc_stall_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.nak) {
++		retval |= handle_hc_nak_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.ack) {
++		if(!hcint.b.chhltd)
++			retval |= handle_hc_ack_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.nyet) {
++		retval |= handle_hc_nyet_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.xacterr) {
++		retval |= handle_hc_xacterr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.bblerr) {
++		retval |= handle_hc_babble_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.frmovrun) {
++		retval |=
++		    handle_hc_frmovrun_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.datatglerr) {
++		retval |=
++		    handle_hc_datatglerr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++
++	return retval;
++}
++#endif /* DWC_DEVICE_ONLY */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,972 @@
++
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_linux.c $
++ * $Revision: #20 $
++ * $Date: 2011/10/26 $
++ * $Change: 1872981 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++/**
++ * @file
++ *
++ * This file contains the implementation of the HCD. In Linux, the HCD
++ * implements the hc_driver API.
++ */
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/errno.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/string.h>
++#include <linux/dma-mapping.h>
++#include <linux/version.h>
++#include <asm/io.h>
++#include <asm/fiq.h>
++#include <linux/usb.h>
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35)
++#include <../drivers/usb/core/hcd.h>
++#else
++#include <linux/usb/hcd.h>
++#endif
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30))
++#define USB_URB_EP_LINKING 1
++#else
++#define USB_URB_EP_LINKING 0
++#endif
++
++#include "dwc_otg_hcd_if.h"
++#include "dwc_otg_dbg.h"
++#include "dwc_otg_driver.h"
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_mphi_fix.h"
++
++/**
++ * Gets the endpoint number from a _bEndpointAddress argument. The endpoint is
++ * qualified with its direction (possible 32 endpoints per device).
++ */
++#define dwc_ep_addr_to_endpoint(_bEndpointAddress_) ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \
++						     ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4)
++
++static const char dwc_otg_hcd_name[] = "dwc_otg_hcd";
++
++extern bool fiq_fix_enable;
++
++/** @name Linux HC Driver API Functions */
++/** @{ */
++/* manage i/o requests, device state */
++static int dwc_otg_urb_enqueue(struct usb_hcd *hcd,
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++		       struct usb_host_endpoint *ep,
++#endif
++		       struct urb *urb, gfp_t mem_flags);
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, struct urb *urb);
++#endif
++#else /* kernels at or post 2.6.30 */
++static int dwc_otg_urb_dequeue(struct usb_hcd *hcd,
++                               struct urb *urb, int status);
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) */
++
++static void endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)
++static void endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep);
++#endif
++static irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd);
++extern int hcd_start(struct usb_hcd *hcd);
++extern void hcd_stop(struct usb_hcd *hcd);
++static int get_frame_number(struct usb_hcd *hcd);
++extern int hub_status_data(struct usb_hcd *hcd, char *buf);
++extern int hub_control(struct usb_hcd *hcd,
++		       u16 typeReq,
++		       u16 wValue, u16 wIndex, char *buf, u16 wLength);
++
++struct wrapper_priv_data {
++	dwc_otg_hcd_t *dwc_otg_hcd;
++};
++
++/** @} */
++
++static struct hc_driver dwc_otg_hc_driver = {
++
++	.description = dwc_otg_hcd_name,
++	.product_desc = "DWC OTG Controller",
++	.hcd_priv_size = sizeof(struct wrapper_priv_data),
++
++	.irq = dwc_otg_hcd_irq,
++
++	.flags = HCD_MEMORY | HCD_USB2,
++
++	//.reset =
++	.start = hcd_start,
++	//.suspend =
++	//.resume =
++	.stop = hcd_stop,
++
++	.urb_enqueue = dwc_otg_urb_enqueue,
++	.urb_dequeue = dwc_otg_urb_dequeue,
++	.endpoint_disable = endpoint_disable,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)
++	.endpoint_reset = endpoint_reset,
++#endif
++	.get_frame_number = get_frame_number,
++
++	.hub_status_data = hub_status_data,
++	.hub_control = hub_control,
++	//.bus_suspend =
++	//.bus_resume =
++};
++
++/** Gets the dwc_otg_hcd from a struct usb_hcd */
++static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hcd *hcd)
++{
++	struct wrapper_priv_data *p;
++	p = (struct wrapper_priv_data *)(hcd->hcd_priv);
++	return p->dwc_otg_hcd;
++}
++
++/** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */
++static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_t * dwc_otg_hcd)
++{
++	return dwc_otg_hcd_get_priv_data(dwc_otg_hcd);
++}
++
++/** Gets the usb_host_endpoint associated with an URB. */
++inline struct usb_host_endpoint *dwc_urb_to_endpoint(struct urb *urb)
++{
++	struct usb_device *dev = urb->dev;
++	int ep_num = usb_pipeendpoint(urb->pipe);
++
++	if (usb_pipein(urb->pipe))
++		return dev->ep_in[ep_num];
++	else
++		return dev->ep_out[ep_num];
++}
++
++static int _disconnect(dwc_otg_hcd_t * hcd)
++{
++	struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd);
++
++	usb_hcd->self.is_b_host = 0;
++	return 0;
++}
++
++static int _start(dwc_otg_hcd_t * hcd)
++{
++	struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd);
++
++	usb_hcd->self.is_b_host = dwc_otg_hcd_is_b_host(hcd);
++	hcd_start(usb_hcd);
++
++	return 0;
++}
++
++static int _hub_info(dwc_otg_hcd_t * hcd, void *urb_handle, uint32_t * hub_addr,
++		     uint32_t * port_addr)
++{
++   struct urb *urb = (struct urb *)urb_handle;
++   struct usb_bus *bus;
++#if 1 //GRAYG - temporary
++   if (NULL == urb_handle)
++      DWC_ERROR("**** %s - NULL URB handle\n", __func__);//GRAYG
++   if (NULL == urb->dev)
++      DWC_ERROR("**** %s - URB has no device\n", __func__);//GRAYG
++   if (NULL == port_addr)
++      DWC_ERROR("**** %s - NULL port_address\n", __func__);//GRAYG
++#endif
++   if (urb->dev->tt) {
++        if (NULL == urb->dev->tt->hub) {
++                DWC_ERROR("**** %s - (URB's transactor has no TT - giving no hub)\n",
++                           __func__); //GRAYG
++                //*hub_addr = (u8)usb_pipedevice(urb->pipe); //GRAYG
++                *hub_addr = 0; //GRAYG
++                // we probably shouldn't have a transaction translator if
++                // there's no associated hub?
++        } else {
++		bus = hcd_to_bus(dwc_otg_hcd_to_hcd(hcd));
++		if (urb->dev->tt->hub == bus->root_hub)
++			*hub_addr = 0;
++		else
++			*hub_addr = urb->dev->tt->hub->devnum;
++	}
++	*port_addr = urb->dev->tt->multi ? urb->dev->ttport : 1;
++   } else {
++        *hub_addr = 0;
++	*port_addr = urb->dev->ttport;
++   }
++   return 0;
++}
++
++static int _speed(dwc_otg_hcd_t * hcd, void *urb_handle)
++{
++	struct urb *urb = (struct urb *)urb_handle;
++	return urb->dev->speed;
++}
++
++static int _get_b_hnp_enable(dwc_otg_hcd_t * hcd)
++{
++	struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd);
++	return usb_hcd->self.b_hnp_enable;
++}
++
++static void allocate_bus_bandwidth(struct usb_hcd *hcd, uint32_t bw,
++				   struct urb *urb)
++{
++	hcd_to_bus(hcd)->bandwidth_allocated += bw / urb->interval;
++	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
++		hcd_to_bus(hcd)->bandwidth_isoc_reqs++;
++	} else {
++		hcd_to_bus(hcd)->bandwidth_int_reqs++;
++	}
++}
++
++static void free_bus_bandwidth(struct usb_hcd *hcd, uint32_t bw,
++			       struct urb *urb)
++{
++	hcd_to_bus(hcd)->bandwidth_allocated -= bw / urb->interval;
++	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
++		hcd_to_bus(hcd)->bandwidth_isoc_reqs--;
++	} else {
++		hcd_to_bus(hcd)->bandwidth_int_reqs--;
++	}
++}
++
++/**
++ * Sets the final status of an URB and returns it to the device driver. Any
++ * required cleanup of the URB is performed.  The HCD lock should be held on
++ * entry.
++ */
++static int _complete(dwc_otg_hcd_t * hcd, void *urb_handle,
++		     dwc_otg_hcd_urb_t * dwc_otg_urb, int32_t status)
++{
++	struct urb *urb = (struct urb *)urb_handle;
++	urb_tq_entry_t *new_entry;
++	int rc = 0;
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		DWC_PRINTF("%s: urb %p, device %d, ep %d %s, status=%d\n",
++			   __func__, urb, usb_pipedevice(urb->pipe),
++			   usb_pipeendpoint(urb->pipe),
++			   usb_pipein(urb->pipe) ? "IN" : "OUT", status);
++		if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
++			int i;
++			for (i = 0; i < urb->number_of_packets; i++) {
++				DWC_PRINTF("  ISO Desc %d status: %d\n",
++					   i, urb->iso_frame_desc[i].status);
++			}
++		}
++	}
++	new_entry = DWC_ALLOC_ATOMIC(sizeof(urb_tq_entry_t));
++	urb->actual_length = dwc_otg_hcd_urb_get_actual_length(dwc_otg_urb);
++	/* Convert status value. */
++	switch (status) {
++	case -DWC_E_PROTOCOL:
++		status = -EPROTO;
++		break;
++	case -DWC_E_IN_PROGRESS:
++		status = -EINPROGRESS;
++		break;
++	case -DWC_E_PIPE:
++		status = -EPIPE;
++		break;
++	case -DWC_E_IO:
++		status = -EIO;
++		break;
++	case -DWC_E_TIMEOUT:
++		status = -ETIMEDOUT;
++		break;
++	case -DWC_E_OVERFLOW:
++		status = -EOVERFLOW;
++		break;
++	case -DWC_E_SHUTDOWN:
++		status = -ESHUTDOWN;
++		break;
++	default:
++		if (status) {
++			DWC_PRINTF("Uknown urb status %d\n", status);
++
++		}
++	}
++
++	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
++		int i;
++
++		urb->error_count = dwc_otg_hcd_urb_get_error_count(dwc_otg_urb);
++		for (i = 0; i < urb->number_of_packets; ++i) {
++			urb->iso_frame_desc[i].actual_length =
++			    dwc_otg_hcd_urb_get_iso_desc_actual_length
++			    (dwc_otg_urb, i);
++			urb->iso_frame_desc[i].status =
++			    dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_urb, i);
++		}
++	}
++
++	urb->status = status;
++	urb->hcpriv = NULL;
++	if (!status) {
++		if ((urb->transfer_flags & URB_SHORT_NOT_OK) &&
++		    (urb->actual_length < urb->transfer_buffer_length)) {
++			urb->status = -EREMOTEIO;
++		}
++	}
++
++	if ((usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) ||
++	    (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) {
++		struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb);
++		if (ep) {
++			free_bus_bandwidth(dwc_otg_hcd_to_hcd(hcd),
++					   dwc_otg_hcd_get_ep_bandwidth(hcd,
++									ep->hcpriv),
++					   urb);
++		}
++	}
++
++	DWC_FREE(dwc_otg_urb);
++	if (!new_entry) {
++		DWC_ERROR("dwc_otg_hcd: complete: cannot allocate URB TQ entry\n");
++		urb->status = -EPROTO;
++		/* don't schedule the tasklet -
++		 * directly return the packet here with error. */
++#if USB_URB_EP_LINKING
++		usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(hcd), urb);
++#endif
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++		usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb);
++#else
++		usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb, urb->status);
++#endif
++	} else {
++		new_entry->urb = urb;
++#if USB_URB_EP_LINKING
++		rc = usb_hcd_check_unlink_urb(dwc_otg_hcd_to_hcd(hcd), urb, urb->status);
++		if(0 == rc) {
++			usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(hcd), urb);
++		}
++#endif
++		if(0 == rc) {
++			DWC_TAILQ_INSERT_TAIL(&hcd->completed_urb_list, new_entry,
++						urb_tq_entries);
++			DWC_TASK_HI_SCHEDULE(hcd->completion_tasklet);
++		}
++	}
++	return 0;
++}
++
++static struct dwc_otg_hcd_function_ops hcd_fops = {
++	.start = _start,
++	.disconnect = _disconnect,
++	.hub_info = _hub_info,
++	.speed = _speed,
++	.complete = _complete,
++	.get_b_hnp_enable = _get_b_hnp_enable,
++};
++
++static struct fiq_handler fh = {
++  .name = "usb_fiq",
++};
++struct fiq_stack_s {
++	int magic1;
++	uint8_t stack[2048];
++	int magic2;
++} fiq_stack;
++
++extern mphi_regs_t c_mphi_regs;
++/**
++ * Initializes the HCD. This function allocates memory for and initializes the
++ * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the
++ * USB bus with the core and calls the hc_driver->start() function. It returns
++ * a negative error on failure.
++ */
++int hcd_init(dwc_bus_dev_t *_dev)
++{
++	struct usb_hcd *hcd = NULL;
++	dwc_otg_hcd_t *dwc_otg_hcd = NULL;
++	dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev);
++	int retval = 0;
++        u64 dmamask;
++	struct pt_regs regs;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT otg_dev=%p\n", otg_dev);
++
++	/* Set device flags indicating whether the HCD supports DMA. */
++	if (dwc_otg_is_dma_enable(otg_dev->core_if))
++                dmamask = DMA_BIT_MASK(32);
++        else
++                dmamask = 0;
++
++#if    defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE)
++        dma_set_mask(&_dev->dev, dmamask);
++        dma_set_coherent_mask(&_dev->dev, dmamask);
++#elif  defined(PCI_INTERFACE)
++        pci_set_dma_mask(_dev, dmamask);
++        pci_set_consistent_dma_mask(_dev, dmamask);
++#endif
++
++	if (fiq_fix_enable)
++	{
++		// Set up fiq
++		claim_fiq(&fh);
++		set_fiq_handler(__FIQ_Branch, 4);
++		memset(&regs,0,sizeof(regs));
++		regs.ARM_r8 = (long)dwc_otg_hcd_handle_fiq;
++		regs.ARM_r9 = (long)0;
++		regs.ARM_sp = (long)fiq_stack.stack + sizeof(fiq_stack.stack) - 4;
++		set_fiq_regs(&regs);
++		fiq_stack.magic1 = 0xdeadbeef;
++		fiq_stack.magic2 = 0xaa995566;
++	}
++
++	/*
++	 * Allocate memory for the base HCD plus the DWC OTG HCD.
++	 * Initialize the base HCD.
++	 */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)
++	hcd = usb_create_hcd(&dwc_otg_hc_driver, &_dev->dev, _dev->dev.bus_id);
++#else
++	hcd = usb_create_hcd(&dwc_otg_hc_driver, &_dev->dev, dev_name(&_dev->dev));
++	hcd->has_tt = 1;
++//      hcd->uses_new_polling = 1;
++//      hcd->poll_rh = 0;
++#endif
++	if (!hcd) {
++		retval = -ENOMEM;
++		goto error1;
++	}
++
++	hcd->regs = otg_dev->os_dep.base;
++
++	if (fiq_fix_enable)
++	{
++		volatile extern void *dwc_regs_base;
++
++		//Set the mphi periph to  the required registers
++		c_mphi_regs.base    = otg_dev->os_dep.mphi_base;
++		c_mphi_regs.ctrl    = otg_dev->os_dep.mphi_base + 0x4c;
++		c_mphi_regs.outdda  = otg_dev->os_dep.mphi_base + 0x28;
++		c_mphi_regs.outddb  = otg_dev->os_dep.mphi_base + 0x2c;
++		c_mphi_regs.intstat = otg_dev->os_dep.mphi_base + 0x50;
++
++		dwc_regs_base = otg_dev->os_dep.base;
++
++		//Enable mphi peripheral
++		writel((1<<31),c_mphi_regs.ctrl);
++#ifdef DEBUG
++		if (readl(c_mphi_regs.ctrl) & 0x80000000)
++			DWC_DEBUGPL(DBG_USER, "MPHI periph has been enabled\n");
++		else
++			DWC_DEBUGPL(DBG_USER, "MPHI periph has NOT been enabled\n");
++#endif
++		// Enable FIQ interrupt from USB peripheral
++		enable_fiq(INTERRUPT_VC_USB);
++	}
++	/* Initialize the DWC OTG HCD. */
++	dwc_otg_hcd = dwc_otg_hcd_alloc_hcd();
++	if (!dwc_otg_hcd) {
++		goto error2;
++	}
++	((struct wrapper_priv_data *)(hcd->hcd_priv))->dwc_otg_hcd =
++	    dwc_otg_hcd;
++	otg_dev->hcd = dwc_otg_hcd;
++
++	if (dwc_otg_hcd_init(dwc_otg_hcd, otg_dev->core_if)) {
++		goto error2;
++	}
++
++	otg_dev->hcd->otg_dev = otg_dev;
++	hcd->self.otg_port = dwc_otg_hcd_otg_port(dwc_otg_hcd);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,33) //don't support for LM(with 2.6.20.1 kernel)
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) //version field absent later
++	hcd->self.otg_version = dwc_otg_get_otg_version(otg_dev->core_if);
++#endif
++	/* Don't support SG list at this point */
++	hcd->self.sg_tablesize = 0;
++#endif
++	/*
++	 * Finish generic HCD initialization and start the HCD. This function
++	 * allocates the DMA buffer pool, registers the USB bus, requests the
++	 * IRQ line, and calls hcd_start method.
++	 */
++#ifdef PLATFORM_INTERFACE
++        retval = usb_add_hcd(hcd, platform_get_irq(_dev, 0), IRQF_SHARED | IRQF_DISABLED);
++#else
++        retval = usb_add_hcd(hcd, _dev->irq, IRQF_SHARED | IRQF_DISABLED);
++#endif
++	if (retval < 0) {
++		goto error2;
++	}
++
++	dwc_otg_hcd_set_priv_data(dwc_otg_hcd, hcd);
++	return 0;
++
++error2:
++	usb_put_hcd(hcd);
++error1:
++	return retval;
++}
++
++/**
++ * Removes the HCD.
++ * Frees memory and resources associated with the HCD and deregisters the bus.
++ */
++void hcd_remove(dwc_bus_dev_t *_dev)
++{
++	dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev);
++	dwc_otg_hcd_t *dwc_otg_hcd;
++	struct usb_hcd *hcd;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE otg_dev=%p\n", otg_dev);
++
++	if (!otg_dev) {
++		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__);
++		return;
++	}
++
++	dwc_otg_hcd = otg_dev->hcd;
++
++	if (!dwc_otg_hcd) {
++		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__);
++		return;
++	}
++
++	hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd);
++
++	if (!hcd) {
++		DWC_DEBUGPL(DBG_ANY,
++			    "%s: dwc_otg_hcd_to_hcd(dwc_otg_hcd) NULL!\n",
++			    __func__);
++		return;
++	}
++	usb_remove_hcd(hcd);
++	dwc_otg_hcd_set_priv_data(dwc_otg_hcd, NULL);
++	dwc_otg_hcd_remove(dwc_otg_hcd);
++	usb_put_hcd(hcd);
++}
++
++/* =========================================================================
++ *  Linux HC Driver Functions
++ * ========================================================================= */
++
++/** Initializes the DWC_otg controller and its root hub and prepares it for host
++ * mode operation. Activates the root port. Returns 0 on success and a negative
++ * error code on failure. */
++int hcd_start(struct usb_hcd *hcd)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	struct usb_bus *bus;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n");
++	bus = hcd_to_bus(hcd);
++
++	hcd->state = HC_STATE_RUNNING;
++	if (dwc_otg_hcd_start(dwc_otg_hcd, &hcd_fops)) {
++		return 0;
++	}
++
++	/* Initialize and connect root hub if one is not already attached */
++	if (bus->root_hub) {
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n");
++		/* Inform the HUB driver to resume. */
++		usb_hcd_resume_root_hub(hcd);
++	}
++
++	return 0;
++}
++
++/**
++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
++ * stopped.
++ */
++void hcd_stop(struct usb_hcd *hcd)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++
++	dwc_otg_hcd_stop(dwc_otg_hcd);
++}
++
++/** Returns the current frame number. */
++static int get_frame_number(struct usb_hcd *hcd)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++
++	return dwc_otg_hcd_get_frame_number(dwc_otg_hcd);
++}
++
++#ifdef DEBUG
++static void dump_urb_info(struct urb *urb, char *fn_name)
++{
++	DWC_PRINTF("%s, urb %p\n", fn_name, urb);
++	DWC_PRINTF("  Device address: %d\n", usb_pipedevice(urb->pipe));
++	DWC_PRINTF("  Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
++		   (usb_pipein(urb->pipe) ? "IN" : "OUT"));
++	DWC_PRINTF("  Endpoint type: %s\n", ( {
++					     char *pipetype;
++					     switch (usb_pipetype(urb->pipe)) {
++case PIPE_CONTROL:
++pipetype = "CONTROL"; break; case PIPE_BULK:
++pipetype = "BULK"; break; case PIPE_INTERRUPT:
++pipetype = "INTERRUPT"; break; case PIPE_ISOCHRONOUS:
++pipetype = "ISOCHRONOUS"; break; default:
++					     pipetype = "UNKNOWN"; break;};
++					     pipetype;}
++		   )) ;
++	DWC_PRINTF("  Speed: %s\n", ( {
++				     char *speed; switch (urb->dev->speed) {
++case USB_SPEED_HIGH:
++speed = "HIGH"; break; case USB_SPEED_FULL:
++speed = "FULL"; break; case USB_SPEED_LOW:
++speed = "LOW"; break; default:
++				     speed = "UNKNOWN"; break;};
++				     speed;}
++		   )) ;
++	DWC_PRINTF("  Max packet size: %d\n",
++		   usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
++	DWC_PRINTF("  Data buffer length: %d\n", urb->transfer_buffer_length);
++	DWC_PRINTF("  Transfer buffer: %p, Transfer DMA: %p\n",
++		   urb->transfer_buffer, (void *)urb->transfer_dma);
++	DWC_PRINTF("  Setup buffer: %p, Setup DMA: %p\n",
++		   urb->setup_packet, (void *)urb->setup_dma);
++	DWC_PRINTF("  Interval: %d\n", urb->interval);
++	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
++		int i;
++		for (i = 0; i < urb->number_of_packets; i++) {
++			DWC_PRINTF("  ISO Desc %d:\n", i);
++			DWC_PRINTF("    offset: %d, length %d\n",
++				   urb->iso_frame_desc[i].offset,
++				   urb->iso_frame_desc[i].length);
++		}
++	}
++}
++#endif
++
++/** Starts processing a USB transfer request specified by a USB Request Block
++ * (URB). mem_flags indicates the type of memory allocation to use while
++ * processing this URB. */
++static int dwc_otg_urb_enqueue(struct usb_hcd *hcd,
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++		       struct usb_host_endpoint *ep,
++#endif
++		       struct urb *urb, gfp_t mem_flags)
++{
++	int retval = 0;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,28)
++	struct usb_host_endpoint *ep = urb->ep;
++#endif
++	dwc_irqflags_t irqflags;
++        void **ref_ep_hcpriv = &ep->hcpriv;
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	dwc_otg_hcd_urb_t *dwc_otg_urb;
++	int i;
++	int alloc_bandwidth = 0;
++	uint8_t ep_type = 0;
++	uint32_t flags = 0;
++	void *buf;
++
++#ifdef DEBUG
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		dump_urb_info(urb, "dwc_otg_urb_enqueue");
++	}
++#endif
++
++	if (!urb->transfer_buffer && urb->transfer_buffer_length)
++		return -EINVAL;
++
++	if ((usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
++	    || (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) {
++		if (!dwc_otg_hcd_is_bandwidth_allocated
++		    (dwc_otg_hcd, ref_ep_hcpriv)) {
++			alloc_bandwidth = 1;
++		}
++	}
++
++	switch (usb_pipetype(urb->pipe)) {
++	case PIPE_CONTROL:
++		ep_type = USB_ENDPOINT_XFER_CONTROL;
++		break;
++	case PIPE_ISOCHRONOUS:
++		ep_type = USB_ENDPOINT_XFER_ISOC;
++		break;
++	case PIPE_BULK:
++		ep_type = USB_ENDPOINT_XFER_BULK;
++		break;
++	case PIPE_INTERRUPT:
++		ep_type = USB_ENDPOINT_XFER_INT;
++		break;
++	default:
++                DWC_WARN("Wrong EP type - %d\n", usb_pipetype(urb->pipe));
++	}
++
++        /* # of packets is often 0 - do we really need to call this then? */
++	dwc_otg_urb = dwc_otg_hcd_urb_alloc(dwc_otg_hcd,
++					    urb->number_of_packets,
++					    mem_flags == GFP_ATOMIC ? 1 : 0);
++
++	if(dwc_otg_urb == NULL)
++		return -ENOMEM;
++
++	if (!dwc_otg_urb && urb->number_of_packets)
++		return -ENOMEM;
++
++	dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_urb, usb_pipedevice(urb->pipe),
++				     usb_pipeendpoint(urb->pipe), ep_type,
++				     usb_pipein(urb->pipe),
++				     usb_maxpacket(urb->dev, urb->pipe,
++						   !(usb_pipein(urb->pipe))));
++
++	buf = urb->transfer_buffer;
++	if (hcd->self.uses_dma) {
++		/*
++		 * Calculate virtual address from physical address,
++		 * because some class driver may not fill transfer_buffer.
++		 * In Buffer DMA mode virual address is used,
++		 * when handling non DWORD aligned buffers.
++		 */
++		//buf = phys_to_virt(urb->transfer_dma);
++                // DMA addresses are bus addresses not physical addresses!
++                buf = dma_to_virt(&urb->dev->dev, urb->transfer_dma);
++	}
++
++	if (!(urb->transfer_flags & URB_NO_INTERRUPT))
++		flags |= URB_GIVEBACK_ASAP;
++	if (urb->transfer_flags & URB_ZERO_PACKET)
++		flags |= URB_SEND_ZERO_PACKET;
++
++	dwc_otg_hcd_urb_set_params(dwc_otg_urb, urb, buf,
++				   urb->transfer_dma,
++				   urb->transfer_buffer_length,
++				   urb->setup_packet,
++				   urb->setup_dma, flags, urb->interval);
++
++	for (i = 0; i < urb->number_of_packets; ++i) {
++		dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_urb, i,
++						    urb->
++						    iso_frame_desc[i].offset,
++						    urb->
++						    iso_frame_desc[i].length);
++	}
++
++	DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &irqflags);
++	urb->hcpriv = dwc_otg_urb;
++#if USB_URB_EP_LINKING
++	retval = usb_hcd_link_urb_to_ep(hcd, urb);
++	if (0 == retval)
++#endif
++	{
++		retval = dwc_otg_hcd_urb_enqueue(dwc_otg_hcd, dwc_otg_urb,
++						/*(dwc_otg_qh_t **)*/
++						ref_ep_hcpriv, 1);
++		if (0 == retval) {
++			if (alloc_bandwidth) {
++				allocate_bus_bandwidth(hcd,
++						dwc_otg_hcd_get_ep_bandwidth(
++							dwc_otg_hcd, *ref_ep_hcpriv),
++						urb);
++			}
++		} else {
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG dwc_otg_hcd_urb_enqueue failed rc %d\n", retval);
++#if USB_URB_EP_LINKING
++			usb_hcd_unlink_urb_from_ep(hcd, urb);
++#endif
++			DWC_FREE(dwc_otg_urb);
++			urb->hcpriv = NULL;
++			if (retval == -DWC_E_NO_DEVICE)
++				retval = -ENODEV;
++		}
++	}
++#if USB_URB_EP_LINKING
++	else
++	{
++		DWC_FREE(dwc_otg_urb);
++		urb->hcpriv = NULL;
++	}
++#endif
++	DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, irqflags);
++	return retval;
++}
++
++/** Aborts/cancels a USB transfer request. Always returns 0 to indicate
++ * success.  */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
++#else
++static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
++#endif
++{
++	dwc_irqflags_t flags;
++	dwc_otg_hcd_t *dwc_otg_hcd;
++        int rc;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n");
++
++	dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++
++#ifdef DEBUG
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		dump_urb_info(urb, "dwc_otg_urb_dequeue");
++	}
++#endif
++
++	DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags);
++	rc = usb_hcd_check_unlink_urb(hcd, urb, status);
++	if (0 == rc) {
++		if(urb->hcpriv != NULL) {
++	                dwc_otg_hcd_urb_dequeue(dwc_otg_hcd,
++	                                    (dwc_otg_hcd_urb_t *)urb->hcpriv);
++
++		        DWC_FREE(urb->hcpriv);
++			urb->hcpriv = NULL;
++		}
++        }
++
++        if (0 == rc) {
++		/* Higher layer software sets URB status. */
++#if USB_URB_EP_LINKING
++                usb_hcd_unlink_urb_from_ep(hcd, urb);
++#endif
++		DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags);
++
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++                usb_hcd_giveback_urb(hcd, urb);
++#else
++                usb_hcd_giveback_urb(hcd, urb, status);
++#endif
++                if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++                        DWC_PRINTF("Called usb_hcd_giveback_urb() \n");
++                        DWC_PRINTF("  1urb->status = %d\n", urb->status);
++                }
++                DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue OK\n");
++        } else {
++		DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags);
++                DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue failed - rc %d\n",
++                            rc);
++        }
++
++	return rc;
++}
++
++/* Frees resources in the DWC_otg controller related to a given endpoint. Also
++ * clears state in the HCD related to the endpoint. Any URBs for the endpoint
++ * must already be dequeued. */
++static void endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++
++	DWC_DEBUGPL(DBG_HCD,
++		    "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, "
++		    "endpoint=%d\n", ep->desc.bEndpointAddress,
++		    dwc_ep_addr_to_endpoint(ep->desc.bEndpointAddress));
++	dwc_otg_hcd_endpoint_disable(dwc_otg_hcd, ep->hcpriv, 250);
++	ep->hcpriv = NULL;
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)
++/* Resets endpoint specific parameter values, in current version used to reset
++ * the data toggle(as a WA). This function can be called from usb_clear_halt routine */
++static void endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
++{
++	dwc_irqflags_t flags;
++	struct usb_device *udev = NULL;
++	int epnum = usb_endpoint_num(&ep->desc);
++	int is_out = usb_endpoint_dir_out(&ep->desc);
++	int is_control = usb_endpoint_xfer_control(&ep->desc);
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++        struct device *dev = DWC_OTG_OS_GETDEV(dwc_otg_hcd->otg_dev->os_dep);
++
++	if (dev)
++		udev = to_usb_device(dev);
++	else
++		return;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP RESET: Endpoint Num=0x%02d\n", epnum);
++
++	DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags);
++	usb_settoggle(udev, epnum, is_out, 0);
++	if (is_control)
++		usb_settoggle(udev, epnum, !is_out, 0);
++
++	if (ep->hcpriv) {
++		dwc_otg_hcd_endpoint_reset(dwc_otg_hcd, ep->hcpriv);
++	}
++	DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags);
++}
++#endif
++
++/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if
++ * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid
++ * interrupt.
++ *
++ * This function is called by the USB core when an interrupt occurs */
++static irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	int32_t retval = dwc_otg_hcd_handle_intr(dwc_otg_hcd);
++	if (retval != 0) {
++		S3C2410X_CLEAR_EINTPEND();
++	}
++	return IRQ_RETVAL(retval);
++}
++
++/** Creates Status Change bitmap for the root hub and root port. The bitmap is
++ * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1
++ * is the status change indicator for the single root port. Returns 1 if either
++ * change indicator is 1, otherwise returns 0. */
++int hub_status_data(struct usb_hcd *hcd, char *buf)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++
++	buf[0] = 0;
++	buf[0] |= (dwc_otg_hcd_is_status_changed(dwc_otg_hcd, 1)) << 1;
++
++	return (buf[0] != 0);
++}
++
++/** Handles hub class-specific requests. */
++int hub_control(struct usb_hcd *hcd,
++		u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength)
++{
++	int retval;
++
++	retval = dwc_otg_hcd_hub_control(hcd_to_dwc_otg_hcd(hcd),
++					 typeReq, wValue, wIndex, buf, wLength);
++
++	switch (retval) {
++	case -DWC_E_INVALID:
++		retval = -EINVAL;
++		break;
++	}
++
++	return retval;
++}
++
++#endif /* DWC_DEVICE_ONLY */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,959 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_queue.c $
++ * $Revision: #44 $
++ * $Date: 2011/10/26 $
++ * $Change: 1873028 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++/**
++ * @file
++ *
++ * This file contains the functions to manage Queue Heads and Queue
++ * Transfer Descriptors.
++ */
++
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_regs.h"
++#include "dwc_otg_mphi_fix.h"
++
++extern bool microframe_schedule;
++
++/**
++ * Free each QTD in the QH's QTD-list then free the QH.  QH should already be
++ * removed from a list.  QTD list should already be empty if called from URB
++ * Dequeue.
++ *
++ * @param hcd HCD instance.
++ * @param qh The QH to free.
++ */
++void dwc_otg_hcd_qh_free(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	dwc_otg_qtd_t *qtd, *qtd_tmp;
++
++	/* Free each QTD in the QTD list */
++	DWC_SPINLOCK(hcd->lock);
++	DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) {
++		DWC_CIRCLEQ_REMOVE(&qh->qtd_list, qtd, qtd_list_entry);
++		dwc_otg_hcd_qtd_free(qtd);
++	}
++
++	if (hcd->core_if->dma_desc_enable) {
++		dwc_otg_hcd_qh_free_ddma(hcd, qh);
++	} else if (qh->dw_align_buf) {
++		uint32_t buf_size;
++		if (qh->ep_type == UE_ISOCHRONOUS) {
++			buf_size = 4096;
++		} else {
++			buf_size = hcd->core_if->core_params->max_transfer_size;
++		}
++		DWC_DMA_FREE(buf_size, qh->dw_align_buf, qh->dw_align_buf_dma);
++	}
++
++	DWC_FREE(qh);
++	DWC_SPINUNLOCK(hcd->lock);
++	return;
++}
++
++#define BitStuffTime(bytecount)  ((8 * 7* bytecount) / 6)
++#define HS_HOST_DELAY		5	/* nanoseconds */
++#define FS_LS_HOST_DELAY	1000	/* nanoseconds */
++#define HUB_LS_SETUP		333	/* nanoseconds */
++#define NS_TO_US(ns)		((ns + 500) / 1000)
++				/* convert & round nanoseconds to microseconds */
++
++static uint32_t calc_bus_time(int speed, int is_in, int is_isoc, int bytecount)
++{
++	unsigned long retval;
++
++	switch (speed) {
++	case USB_SPEED_HIGH:
++		if (is_isoc) {
++			retval =
++			    ((38 * 8 * 2083) +
++			     (2083 * (3 + BitStuffTime(bytecount)))) / 1000 +
++			    HS_HOST_DELAY;
++		} else {
++			retval =
++			    ((55 * 8 * 2083) +
++			     (2083 * (3 + BitStuffTime(bytecount)))) / 1000 +
++			    HS_HOST_DELAY;
++		}
++		break;
++	case USB_SPEED_FULL:
++		if (is_isoc) {
++			retval =
++			    (8354 * (31 + 10 * BitStuffTime(bytecount))) / 1000;
++			if (is_in) {
++				retval = 7268 + FS_LS_HOST_DELAY + retval;
++			} else {
++				retval = 6265 + FS_LS_HOST_DELAY + retval;
++			}
++		} else {
++			retval =
++			    (8354 * (31 + 10 * BitStuffTime(bytecount))) / 1000;
++			retval = 9107 + FS_LS_HOST_DELAY + retval;
++		}
++		break;
++	case USB_SPEED_LOW:
++		if (is_in) {
++			retval =
++			    (67667 * (31 + 10 * BitStuffTime(bytecount))) /
++			    1000;
++			retval =
++			    64060 + (2 * HUB_LS_SETUP) + FS_LS_HOST_DELAY +
++			    retval;
++		} else {
++			retval =
++			    (66700 * (31 + 10 * BitStuffTime(bytecount))) /
++			    1000;
++			retval =
++			    64107 + (2 * HUB_LS_SETUP) + FS_LS_HOST_DELAY +
++			    retval;
++		}
++		break;
++	default:
++		DWC_WARN("Unknown device speed\n");
++		retval = -1;
++	}
++
++	return NS_TO_US(retval);
++}
++
++/**
++ * Initializes a QH structure.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh  The QH to init.
++ * @param urb Holds the information about the device/endpoint that we need
++ * 	      to initialize the QH.
++ */
++#define SCHEDULE_SLOP 10
++void qh_init(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, dwc_otg_hcd_urb_t * urb)
++{
++	char *speed, *type;
++	int dev_speed;
++	uint32_t hub_addr, hub_port;
++
++	dwc_memset(qh, 0, sizeof(dwc_otg_qh_t));
++
++	/* Initialize QH */
++	qh->ep_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info);
++	qh->ep_is_in = dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? 1 : 0;
++
++	qh->data_toggle = DWC_OTG_HC_PID_DATA0;
++	qh->maxp = dwc_otg_hcd_get_mps(&urb->pipe_info);
++	DWC_CIRCLEQ_INIT(&qh->qtd_list);
++	DWC_LIST_INIT(&qh->qh_list_entry);
++	qh->channel = NULL;
++
++	/* FS/LS Enpoint on HS Hub
++	 * NOT virtual root hub */
++	dev_speed = hcd->fops->speed(hcd, urb->priv);
++
++	hcd->fops->hub_info(hcd, urb->priv, &hub_addr, &hub_port);
++	qh->do_split = 0;
++	if (microframe_schedule)
++		qh->speed = dev_speed;
++
++	qh->nak_frame = 0xffff;
++
++	if (((dev_speed == USB_SPEED_LOW) ||
++	     (dev_speed == USB_SPEED_FULL)) &&
++	    (hub_addr != 0 && hub_addr != 1)) {
++		DWC_DEBUGPL(DBG_HCD,
++			    "QH init: EP %d: TT found at hub addr %d, for port %d\n",
++			    dwc_otg_hcd_get_ep_num(&urb->pipe_info), hub_addr,
++			    hub_port);
++		qh->do_split = 1;
++		qh->skip_count = 0;
++	}
++
++	if (qh->ep_type == UE_INTERRUPT || qh->ep_type == UE_ISOCHRONOUS) {
++		/* Compute scheduling parameters once and save them. */
++		hprt0_data_t hprt;
++
++		/** @todo Account for split transfers in the bus time. */
++		int bytecount =
++		    dwc_hb_mult(qh->maxp) * dwc_max_packet(qh->maxp);
++
++		qh->usecs =
++		    calc_bus_time((qh->do_split ? USB_SPEED_HIGH : dev_speed),
++				  qh->ep_is_in, (qh->ep_type == UE_ISOCHRONOUS),
++				  bytecount);
++		/* Start in a slightly future (micro)frame. */
++		qh->sched_frame = dwc_frame_num_inc(hcd->frame_number,
++						    SCHEDULE_SLOP);
++		qh->interval = urb->interval;
++
++#if 0
++		/* Increase interrupt polling rate for debugging. */
++		if (qh->ep_type == UE_INTERRUPT) {
++			qh->interval = 8;
++		}
++#endif
++		hprt.d32 = DWC_READ_REG32(hcd->core_if->host_if->hprt0);
++		if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) &&
++		    ((dev_speed == USB_SPEED_LOW) ||
++		     (dev_speed == USB_SPEED_FULL))) {
++			qh->interval *= 8;
++			qh->sched_frame |= 0x7;
++			qh->start_split_frame = qh->sched_frame;
++		}
++
++	}
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n");
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - qh = %p\n", qh);
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Device Address = %d\n",
++		    dwc_otg_hcd_get_dev_addr(&urb->pipe_info));
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Endpoint %d, %s\n",
++		    dwc_otg_hcd_get_ep_num(&urb->pipe_info),
++		    dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT");
++	switch (dev_speed) {
++	case USB_SPEED_LOW:
++		qh->dev_speed = DWC_OTG_EP_SPEED_LOW;
++		speed = "low";
++		break;
++	case USB_SPEED_FULL:
++		qh->dev_speed = DWC_OTG_EP_SPEED_FULL;
++		speed = "full";
++		break;
++	case USB_SPEED_HIGH:
++		qh->dev_speed = DWC_OTG_EP_SPEED_HIGH;
++		speed = "high";
++		break;
++	default:
++		speed = "?";
++		break;
++	}
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Speed = %s\n", speed);
++
++	switch (qh->ep_type) {
++	case UE_ISOCHRONOUS:
++		type = "isochronous";
++		break;
++	case UE_INTERRUPT:
++		type = "interrupt";
++		break;
++	case UE_CONTROL:
++		type = "control";
++		break;
++	case UE_BULK:
++		type = "bulk";
++		break;
++	default:
++		type = "?";
++		break;
++	}
++
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Type = %s\n", type);
++
++#ifdef DEBUG
++	if (qh->ep_type == UE_INTERRUPT) {
++		DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs = %d\n",
++			    qh->usecs);
++		DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - interval = %d\n",
++			    qh->interval);
++	}
++#endif
++
++}
++
++/**
++ * This function allocates and initializes a QH.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param urb Holds the information about the device/endpoint that we need
++ * 	      to initialize the QH.
++ * @param atomic_alloc Flag to do atomic allocation if needed
++ *
++ * @return Returns pointer to the newly allocated QH, or NULL on error. */
++dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t * hcd,
++				    dwc_otg_hcd_urb_t * urb, int atomic_alloc)
++{
++	dwc_otg_qh_t *qh;
++
++	/* Allocate memory */
++	/** @todo add memflags argument */
++	qh = dwc_otg_hcd_qh_alloc(atomic_alloc);
++	if (qh == NULL) {
++		DWC_ERROR("qh allocation failed");
++		return NULL;
++	}
++
++	qh_init(hcd, qh, urb);
++
++	if (hcd->core_if->dma_desc_enable
++	    && (dwc_otg_hcd_qh_init_ddma(hcd, qh) < 0)) {
++		dwc_otg_hcd_qh_free(hcd, qh);
++		return NULL;
++	}
++
++	return qh;
++}
++
++/* microframe_schedule=0 start */
++
++/**
++ * Checks that a channel is available for a periodic transfer.
++ *
++ * @return 0 if successful, negative error code otherise.
++ */
++static int periodic_channel_available(dwc_otg_hcd_t * hcd)
++{
++	/*
++	 * Currently assuming that there is a dedicated host channnel for each
++	 * periodic transaction plus at least one host channel for
++	 * non-periodic transactions.
++	 */
++	int status;
++	int num_channels;
++
++	num_channels = hcd->core_if->core_params->host_channels;
++	if ((hcd->periodic_channels + hcd->non_periodic_channels < num_channels)
++	    && (hcd->periodic_channels < num_channels - 1)) {
++		status = 0;
++	} else {
++		DWC_INFO("%s: Total channels: %d, Periodic: %d, Non-periodic: %d\n",
++			__func__, num_channels, hcd->periodic_channels, hcd->non_periodic_channels);	//NOTICE
++		status = -DWC_E_NO_SPACE;
++	}
++
++	return status;
++}
++
++/**
++ * Checks that there is sufficient bandwidth for the specified QH in the
++ * periodic schedule. For simplicity, this calculation assumes that all the
++ * transfers in the periodic schedule may occur in the same (micro)frame.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh QH containing periodic bandwidth required.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++static int check_periodic_bandwidth(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	int status;
++	int16_t max_claimed_usecs;
++
++	status = 0;
++
++	if ((qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) || qh->do_split) {
++		/*
++		 * High speed mode.
++		 * Max periodic usecs is 80% x 125 usec = 100 usec.
++		 */
++
++		max_claimed_usecs = 100 - qh->usecs;
++	} else {
++		/*
++		 * Full speed mode.
++		 * Max periodic usecs is 90% x 1000 usec = 900 usec.
++		 */
++		max_claimed_usecs = 900 - qh->usecs;
++	}
++
++	if (hcd->periodic_usecs > max_claimed_usecs) {
++		DWC_INFO("%s: already claimed usecs %d, required usecs %d\n", __func__, hcd->periodic_usecs, qh->usecs);	//NOTICE
++		status = -DWC_E_NO_SPACE;
++	}
++
++	return status;
++}
++
++/* microframe_schedule=0 end */
++
++/**
++ * Microframe scheduler
++ * track the total use in hcd->frame_usecs
++ * keep each qh use in qh->frame_usecs
++ * when surrendering the qh then donate the time back
++ */
++const unsigned short max_uframe_usecs[]={ 100, 100, 100, 100, 100, 100, 30, 0 };
++
++/*
++ * called from dwc_otg_hcd.c:dwc_otg_hcd_init
++ */
++int init_hcd_usecs(dwc_otg_hcd_t *_hcd)
++{
++	int i;
++	for (i=0; i<8; i++) {
++		_hcd->frame_usecs[i] = max_uframe_usecs[i];
++	}
++	return 0;
++}
++
++static int find_single_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
++{
++	int i;
++	unsigned short utime;
++	int t_left;
++	int ret;
++	int done;
++
++	ret = -1;
++	utime = _qh->usecs;
++	t_left = utime;
++	i = 0;
++	done = 0;
++	while (done == 0) {
++		/* At the start _hcd->frame_usecs[i] = max_uframe_usecs[i]; */
++		if (utime <= _hcd->frame_usecs[i]) {
++			_hcd->frame_usecs[i] -= utime;
++			_qh->frame_usecs[i] += utime;
++			t_left -= utime;
++			ret = i;
++			done = 1;
++			return ret;
++		} else {
++			i++;
++			if (i == 8) {
++				done = 1;
++				ret = -1;
++			}
++		}
++	}
++	return ret;
++ }
++
++/*
++ * use this for FS apps that can span multiple uframes
++  */
++static int find_multi_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
++{
++	int i;
++	int j;
++	unsigned short utime;
++	int t_left;
++	int ret;
++	int done;
++	unsigned short xtime;
++
++	ret = -1;
++	utime = _qh->usecs;
++	t_left = utime;
++	i = 0;
++	done = 0;
++loop:
++	while (done == 0) {
++		if(_hcd->frame_usecs[i] <= 0) {
++			i++;
++			if (i == 8) {
++				done = 1;
++				ret = -1;
++			}
++			goto loop;
++		}
++
++		/*
++		 * we need n consecutive slots
++		 * so use j as a start slot j plus j+1 must be enough time (for now)
++		 */
++		xtime= _hcd->frame_usecs[i];
++		for (j = i+1 ; j < 8 ; j++ ) {
++                       /*
++                        * if we add this frame remaining time to xtime we may
++                        * be OK, if not we need to test j for a complete frame
++                        */
++                       if ((xtime+_hcd->frame_usecs[j]) < utime) {
++                               if (_hcd->frame_usecs[j] < max_uframe_usecs[j]) {
++                                       j = 8;
++                                       ret = -1;
++                                       continue;
++                               }
++                       }
++                       if (xtime >= utime) {
++                               ret = i;
++                               j = 8;  /* stop loop with a good value ret */
++                               continue;
++                       }
++                       /* add the frame time to x time */
++                       xtime += _hcd->frame_usecs[j];
++		       /* we must have a fully available next frame or break */
++		       if ((xtime < utime)
++				       && (_hcd->frame_usecs[j] == max_uframe_usecs[j])) {
++			       ret = -1;
++			       j = 8;  /* stop loop with a bad value ret */
++			       continue;
++		       }
++		}
++		if (ret >= 0) {
++			t_left = utime;
++			for (j = i; (t_left>0) && (j < 8); j++ ) {
++				t_left -= _hcd->frame_usecs[j];
++				if ( t_left <= 0 ) {
++					_qh->frame_usecs[j] += _hcd->frame_usecs[j] + t_left;
++					_hcd->frame_usecs[j]= -t_left;
++					ret = i;
++					done = 1;
++				} else {
++					_qh->frame_usecs[j] += _hcd->frame_usecs[j];
++					_hcd->frame_usecs[j] = 0;
++				}
++			}
++		} else {
++			i++;
++			if (i == 8) {
++				done = 1;
++				ret = -1;
++			}
++		}
++	}
++	return ret;
++}
++
++static int find_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
++{
++	int ret;
++	ret = -1;
++
++	if (_qh->speed == USB_SPEED_HIGH) {
++		/* if this is a hs transaction we need a full frame */
++		ret = find_single_uframe(_hcd, _qh);
++	} else {
++		/* if this is a fs transaction we may need a sequence of frames */
++		ret = find_multi_uframe(_hcd, _qh);
++	}
++	return ret;
++}
++
++/**
++ * Checks that the max transfer size allowed in a host channel is large enough
++ * to handle the maximum data transfer in a single (micro)frame for a periodic
++ * transfer.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh QH for a periodic endpoint.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++static int check_max_xfer_size(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	int status;
++	uint32_t max_xfer_size;
++	uint32_t max_channel_xfer_size;
++
++	status = 0;
++
++	max_xfer_size = dwc_max_packet(qh->maxp) * dwc_hb_mult(qh->maxp);
++	max_channel_xfer_size = hcd->core_if->core_params->max_transfer_size;
++
++	if (max_xfer_size > max_channel_xfer_size) {
++		DWC_INFO("%s: Periodic xfer length %d > " "max xfer length for channel %d\n",
++				__func__, max_xfer_size, max_channel_xfer_size);	//NOTICE
++		status = -DWC_E_NO_SPACE;
++	}
++
++	return status;
++}
++
++
++extern int g_next_sched_frame, g_np_count, g_np_sent;
++
++/**
++ * Schedules an interrupt or isochronous transfer in the periodic schedule.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh QH for the periodic transfer. The QH should already contain the
++ * scheduling information.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++static int schedule_periodic(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	int status = 0;
++
++	if (microframe_schedule) {
++		int frame;
++		status = find_uframe(hcd, qh);
++		frame = -1;
++		if (status == 0) {
++			frame = 7;
++		} else {
++			if (status > 0 )
++				frame = status-1;
++		}
++
++		/* Set the new frame up */
++		if (frame > -1) {
++			qh->sched_frame &= ~0x7;
++			qh->sched_frame |= (frame & 7);
++		}
++
++		if (status != -1)
++			status = 0;
++	} else {
++		status = periodic_channel_available(hcd);
++		if (status) {
++			DWC_INFO("%s: No host channel available for periodic " "transfer.\n", __func__);	//NOTICE
++			return status;
++		}
++
++		status = check_periodic_bandwidth(hcd, qh);
++	}
++	if (status) {
++		DWC_INFO("%s: Insufficient periodic bandwidth for "
++			    "periodic transfer.\n", __func__);
++		return status;
++	}
++	status = check_max_xfer_size(hcd, qh);
++	if (status) {
++		DWC_INFO("%s: Channel max transfer size too small "
++			    "for periodic transfer.\n", __func__);
++		return status;
++	}
++
++	if (hcd->core_if->dma_desc_enable) {
++		/* Don't rely on SOF and start in ready schedule */
++		DWC_LIST_INSERT_TAIL(&hcd->periodic_sched_ready, &qh->qh_list_entry);
++	}
++	else {
++		if(DWC_LIST_EMPTY(&hcd->periodic_sched_inactive) || dwc_frame_num_le(qh->sched_frame, g_next_sched_frame))
++		{
++			g_next_sched_frame = qh->sched_frame;
++
++		}
++		/* Always start in the inactive schedule. */
++		DWC_LIST_INSERT_TAIL(&hcd->periodic_sched_inactive, &qh->qh_list_entry);
++	}
++
++	if (!microframe_schedule) {
++		/* Reserve the periodic channel. */
++		hcd->periodic_channels++;
++	}
++
++	/* Update claimed usecs per (micro)frame. */
++	hcd->periodic_usecs += qh->usecs;
++
++	return status;
++}
++
++
++/**
++ * This function adds a QH to either the non periodic or periodic schedule if
++ * it is not already in the schedule. If the QH is already in the schedule, no
++ * action is taken.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++int dwc_otg_hcd_qh_add(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	int status = 0;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	if (!DWC_LIST_EMPTY(&qh->qh_list_entry)) {
++		/* QH already in a schedule. */
++		return status;
++	}
++
++	/* Add the new QH to the appropriate schedule */
++	if (dwc_qh_is_non_per(qh)) {
++		/* Always start in the inactive schedule. */
++		DWC_LIST_INSERT_TAIL(&hcd->non_periodic_sched_inactive,
++				     &qh->qh_list_entry);
++		g_np_count++;
++	} else {
++		status = schedule_periodic(hcd, qh);
++		if ( !hcd->periodic_qh_count ) {
++			intr_mask.b.sofintr = 1;
++			DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk,
++								intr_mask.d32, intr_mask.d32);
++		}
++		hcd->periodic_qh_count++;
++	}
++
++	return status;
++}
++
++/**
++ * Removes an interrupt or isochronous transfer from the periodic schedule.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh QH for the periodic transfer.
++ */
++static void deschedule_periodic(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	int i;
++	DWC_LIST_REMOVE_INIT(&qh->qh_list_entry);
++
++	/* Update claimed usecs per (micro)frame. */
++	hcd->periodic_usecs -= qh->usecs;
++
++	if (!microframe_schedule) {
++		/* Release the periodic channel reservation. */
++		hcd->periodic_channels--;
++	} else {
++		for (i = 0; i < 8; i++) {
++			hcd->frame_usecs[i] += qh->frame_usecs[i];
++			qh->frame_usecs[i] = 0;
++		}
++	}
++}
++
++/**
++ * Removes a QH from either the non-periodic or periodic schedule.  Memory is
++ * not freed.
++ *
++ * @param hcd The HCD state structure.
++ * @param qh QH to remove from schedule. */
++void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	if (DWC_LIST_EMPTY(&qh->qh_list_entry)) {
++		/* QH is not in a schedule. */
++		return;
++	}
++
++	if (dwc_qh_is_non_per(qh)) {
++		if (hcd->non_periodic_qh_ptr == &qh->qh_list_entry) {
++			hcd->non_periodic_qh_ptr =
++			    hcd->non_periodic_qh_ptr->next;
++		}
++		DWC_LIST_REMOVE_INIT(&qh->qh_list_entry);
++
++		// If we've removed the last non-periodic entry then there are none left!
++		g_np_count = g_np_sent;
++	} else {
++		deschedule_periodic(hcd, qh);
++		hcd->periodic_qh_count--;
++		if( !hcd->periodic_qh_count ) {
++			intr_mask.b.sofintr = 1;
++				DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk,
++									intr_mask.d32, 0);
++		}
++	}
++}
++
++/**
++ * Deactivates a QH. For non-periodic QHs, removes the QH from the active
++ * non-periodic schedule. The QH is added to the inactive non-periodic
++ * schedule if any QTDs are still attached to the QH.
++ *
++ * For periodic QHs, the QH is removed from the periodic queued schedule. If
++ * there are any QTDs still attached to the QH, the QH is added to either the
++ * periodic inactive schedule or the periodic ready schedule and its next
++ * scheduled frame is calculated. The QH is placed in the ready schedule if
++ * the scheduled frame has been reached already. Otherwise it's placed in the
++ * inactive schedule. If there are no QTDs attached to the QH, the QH is
++ * completely removed from the periodic schedule.
++ */
++void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh,
++			       int sched_next_periodic_split)
++{
++	if (dwc_qh_is_non_per(qh)) {
++
++		dwc_otg_qh_t *qh_tmp;
++		dwc_list_link_t *qh_list;
++		DWC_LIST_FOREACH(qh_list, &hcd->non_periodic_sched_inactive)
++		{
++			qh_tmp = DWC_LIST_ENTRY(qh_list, struct dwc_otg_qh, qh_list_entry);
++			if(qh_tmp == qh)
++			{
++				/*
++				 *  FIQ is being disabled because this one nevers gets a np_count increment
++				 *  This is still not absolutely correct, but it should fix itself with
++				 *  just an unnecessary extra interrupt
++				 */
++				g_np_sent = g_np_count;
++			}
++		}
++
++
++		dwc_otg_hcd_qh_remove(hcd, qh);
++		if (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) {
++			/* Add back to inactive non-periodic schedule. */
++			dwc_otg_hcd_qh_add(hcd, qh);
++		}
++	} else {
++		uint16_t frame_number = dwc_otg_hcd_get_frame_number(hcd);
++
++		if (qh->do_split) {
++			/* Schedule the next continuing periodic split transfer */
++			if (sched_next_periodic_split) {
++
++				qh->sched_frame = frame_number;
++
++				if (dwc_frame_num_le(frame_number,
++						     dwc_frame_num_inc
++						     (qh->start_split_frame,
++						      1))) {
++					/*
++					 * Allow one frame to elapse after start
++					 * split microframe before scheduling
++					 * complete split, but DONT if we are
++					 * doing the next start split in the
++					 * same frame for an ISOC out.
++					 */
++					if ((qh->ep_type != UE_ISOCHRONOUS) ||
++					    (qh->ep_is_in != 0)) {
++						qh->sched_frame =
++						    dwc_frame_num_inc(qh->sched_frame, 1);
++					}
++				}
++			} else {
++				qh->sched_frame =
++				    dwc_frame_num_inc(qh->start_split_frame,
++						      qh->interval);
++				if (dwc_frame_num_le
++				    (qh->sched_frame, frame_number)) {
++					qh->sched_frame = frame_number;
++				}
++				qh->sched_frame |= 0x7;
++				qh->start_split_frame = qh->sched_frame;
++			}
++		} else {
++			qh->sched_frame =
++			    dwc_frame_num_inc(qh->sched_frame, qh->interval);
++			if (dwc_frame_num_le(qh->sched_frame, frame_number)) {
++				qh->sched_frame = frame_number;
++			}
++		}
++
++		if (DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) {
++			dwc_otg_hcd_qh_remove(hcd, qh);
++		} else {
++			/*
++			 * Remove from periodic_sched_queued and move to
++			 * appropriate queue.
++			 */
++			if ((microframe_schedule && dwc_frame_num_le(qh->sched_frame, frame_number)) ||
++			(!microframe_schedule && qh->sched_frame == frame_number)) {
++				DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_ready,
++						   &qh->qh_list_entry);
++			} else {
++				if(!dwc_frame_num_le(g_next_sched_frame, qh->sched_frame))
++				{
++					g_next_sched_frame = qh->sched_frame;
++				}
++
++				DWC_LIST_MOVE_HEAD
++				    (&hcd->periodic_sched_inactive,
++				     &qh->qh_list_entry);
++			}
++		}
++	}
++}
++
++/**
++ * This function allocates and initializes a QTD.
++ *
++ * @param urb The URB to create a QTD from.  Each URB-QTD pair will end up
++ * 	      pointing to each other so each pair should have a unique correlation.
++ * @param atomic_alloc Flag to do atomic alloc if needed
++ *
++ * @return Returns pointer to the newly allocated QTD, or NULL on error. */
++dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(dwc_otg_hcd_urb_t * urb, int atomic_alloc)
++{
++	dwc_otg_qtd_t *qtd;
++
++	qtd = dwc_otg_hcd_qtd_alloc(atomic_alloc);
++	if (qtd == NULL) {
++		return NULL;
++	}
++
++	dwc_otg_hcd_qtd_init(qtd, urb);
++	return qtd;
++}
++
++/**
++ * Initializes a QTD structure.
++ *
++ * @param qtd The QTD to initialize.
++ * @param urb The URB to use for initialization.  */
++void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t * qtd, dwc_otg_hcd_urb_t * urb)
++{
++	dwc_memset(qtd, 0, sizeof(dwc_otg_qtd_t));
++	qtd->urb = urb;
++	if (dwc_otg_hcd_get_pipe_type(&urb->pipe_info) == UE_CONTROL) {
++		/*
++		 * The only time the QTD data toggle is used is on the data
++		 * phase of control transfers. This phase always starts with
++		 * DATA1.
++		 */
++		qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
++		qtd->control_phase = DWC_OTG_CONTROL_SETUP;
++	}
++
++	/* start split */
++	qtd->complete_split = 0;
++	qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
++	qtd->isoc_split_offset = 0;
++	qtd->in_process = 0;
++
++	/* Store the qtd ptr in the urb to reference what QTD. */
++	urb->qtd = qtd;
++	return;
++}
++
++/**
++ * This function adds a QTD to the QTD-list of a QH.  It will find the correct
++ * QH to place the QTD into.  If it does not find a QH, then it will create a
++ * new QH. If the QH to which the QTD is added is not currently scheduled, it
++ * is placed into the proper schedule based on its EP type.
++ * HCD lock must be held and interrupts must be disabled on entry
++ *
++ * @param[in] qtd The QTD to add
++ * @param[in] hcd The DWC HCD structure
++ * @param[out] qh out parameter to return queue head
++ * @param atomic_alloc Flag to do atomic alloc if needed
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * qtd,
++			dwc_otg_hcd_t * hcd, dwc_otg_qh_t ** qh, int atomic_alloc)
++{
++	int retval = 0;
++	dwc_otg_hcd_urb_t *urb = qtd->urb;
++
++	/*
++	 * Get the QH which holds the QTD-list to insert to. Create QH if it
++	 * doesn't exist.
++	 */
++	if (*qh == NULL) {
++		*qh = dwc_otg_hcd_qh_create(hcd, urb, atomic_alloc);
++		if (*qh == NULL) {
++			retval = -DWC_E_NO_MEMORY;
++			goto done;
++		}
++	}
++	retval = dwc_otg_hcd_qh_add(hcd, *qh);
++	if (retval == 0) {
++		DWC_CIRCLEQ_INSERT_TAIL(&((*qh)->qtd_list), qtd,
++					qtd_list_entry);
++		qtd->qh = *qh;
++	}
++done:
++
++	return retval;
++}
++
++#endif /* DWC_DEVICE_ONLY */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.c linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.c
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.c	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,113 @@
++#include "dwc_otg_regs.h"
++#include "dwc_otg_dbg.h"
++
++void dwc_debug_print_core_int_reg(gintsts_data_t gintsts, const char* function_name)
++{
++	DWC_DEBUGPL(DBG_USER,   "*** Debugging from within the %s  function: ***\n"
++				"curmode:     %1i    Modemismatch: %1i    otgintr:    %1i    sofintr:    %1i\n"
++				"rxstsqlvl:   %1i    nptxfempty  : %1i    ginnakeff:  %1i    goutnakeff: %1i\n"
++				"ulpickint:   %1i    i2cintr:      %1i    erlysuspend:%1i    usbsuspend: %1i\n"
++				"usbreset:    %1i    enumdone:     %1i    isooutdrop: %1i    eopframe:   %1i\n"
++				"restoredone: %1i    epmismatch:   %1i    inepint:    %1i    outepintr:  %1i\n"
++				"incomplisoin:%1i    incomplisoout:%1i    fetsusp:    %1i    resetdet:   %1i\n"
++				"portintr:    %1i    hcintr:       %1i    ptxfempty:  %1i    lpmtranrcvd:%1i\n"
++				"conidstschng:%1i    disconnect:   %1i    sessreqintr:%1i    wkupintr:   %1i\n",
++				function_name,
++				gintsts.b.curmode,
++				gintsts.b.modemismatch,
++				gintsts.b.otgintr,
++				gintsts.b.sofintr,
++				gintsts.b.rxstsqlvl,
++				gintsts.b.nptxfempty,
++				gintsts.b.ginnakeff,
++				gintsts.b.goutnakeff,
++				gintsts.b.ulpickint,
++				gintsts.b.i2cintr,
++				gintsts.b.erlysuspend,
++				gintsts.b.usbsuspend,
++				gintsts.b.usbreset,
++				gintsts.b.enumdone,
++				gintsts.b.isooutdrop,
++				gintsts.b.eopframe,
++				gintsts.b.restoredone,
++				gintsts.b.epmismatch,
++				gintsts.b.inepint,
++				gintsts.b.outepintr,
++				gintsts.b.incomplisoin,
++				gintsts.b.incomplisoout,
++				gintsts.b.fetsusp,
++				gintsts.b.resetdet,
++				gintsts.b.portintr,
++				gintsts.b.hcintr,
++				gintsts.b.ptxfempty,
++				gintsts.b.lpmtranrcvd,
++				gintsts.b.conidstschng,
++				gintsts.b.disconnect,
++				gintsts.b.sessreqintr,
++				gintsts.b.wkupintr);
++	return;
++}
++
++void dwc_debug_core_int_mask(gintmsk_data_t gintmsk, const char* function_name)
++{
++	DWC_DEBUGPL(DBG_USER,	"Interrupt Mask status (called from %s) :\n"
++				"modemismatch: %1i     otgintr:    %1i    sofintr:    %1i    rxstsqlvl:   %1i\n"
++				"nptxfempty:   %1i     ginnakeff:  %1i    goutnakeff: %1i    ulpickint:   %1i\n"
++				"i2cintr:      %1i     erlysuspend:%1i    usbsuspend: %1i    usbreset:    %1i\n"
++				"enumdone:     %1i     isooutdrop: %1i    eopframe:   %1i    restoredone: %1i\n"
++				"epmismatch:   %1i     inepintr:   %1i    outepintr:  %1i    incomplisoin:%1i\n"
++				"incomplisoout:%1i     fetsusp:    %1i    resetdet:   %1i    portintr:    %1i\n"
++				"hcintr:       %1i     ptxfempty:  %1i    lpmtranrcvd:%1i    conidstschng:%1i\n"
++				"disconnect:   %1i     sessreqintr:%1i    wkupintr:   %1i\n",
++				function_name,
++				gintmsk.b.modemismatch,
++				gintmsk.b.otgintr,
++				gintmsk.b.sofintr,
++				gintmsk.b.rxstsqlvl,
++				gintmsk.b.nptxfempty,
++				gintmsk.b.ginnakeff,
++				gintmsk.b.goutnakeff,
++				gintmsk.b.ulpickint,
++				gintmsk.b.i2cintr,
++				gintmsk.b.erlysuspend,
++				gintmsk.b.usbsuspend,
++				gintmsk.b.usbreset,
++				gintmsk.b.enumdone,
++				gintmsk.b.isooutdrop,
++				gintmsk.b.eopframe,
++				gintmsk.b.restoredone,
++				gintmsk.b.epmismatch,
++				gintmsk.b.inepintr,
++				gintmsk.b.outepintr,
++				gintmsk.b.incomplisoin,
++				gintmsk.b.incomplisoout,
++				gintmsk.b.fetsusp,
++				gintmsk.b.resetdet,
++				gintmsk.b.portintr,
++				gintmsk.b.hcintr,
++				gintmsk.b.ptxfempty,
++				gintmsk.b.lpmtranrcvd,
++				gintmsk.b.conidstschng,
++				gintmsk.b.disconnect,
++				gintmsk.b.sessreqintr,
++				gintmsk.b.wkupintr);
++	return;
++}
++
++void dwc_debug_otg_int(gotgint_data_t gotgint, const char* function_name)
++{
++	DWC_DEBUGPL(DBG_USER,	"otg int register (from %s function):\n"
++				"sesenddet:%1i    sesreqsucstschung:%2i    hstnegsucstschng:%1i\n"
++				"hstnegdet:%1i    adevtoutchng:     %2i    debdone:         %1i\n"
++				"mvic:     %1i\n",
++				function_name,
++				gotgint.b.sesenddet,
++				gotgint.b.sesreqsucstschng,
++				gotgint.b.hstnegsucstschng,
++				gotgint.b.hstnegdet,
++				gotgint.b.adevtoutchng,
++				gotgint.b.debdone,
++				gotgint.b.mvic);
++
++	return;
++}
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.h linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.h
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.h	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,48 @@
++#ifndef __DWC_OTG_MPHI_FIX_H__
++#define __DWC_OTG_MPHI_FIX_H__
++#define FIQ_WRITE(_addr_,_data_) (*(volatile uint32_t *) (_addr_) = (_data_))
++#define FIQ_READ(_addr_) (*(volatile uint32_t *) (_addr_))
++
++typedef struct {
++	volatile void* base;
++	volatile void* ctrl;
++	volatile void* outdda;
++	volatile void* outddb;
++	volatile void* intstat;
++} mphi_regs_t;
++
++void dwc_debug_print_core_int_reg(gintsts_data_t gintsts, const char* function_name);
++void dwc_debug_core_int_mask(gintsts_data_t gintmsk, const char* function_name);
++void dwc_debug_otg_int(gotgint_data_t gotgint, const char* function_name);
++
++extern gintsts_data_t gintsts_saved;
++
++#ifdef DEBUG
++#define DWC_DBG_PRINT_CORE_INT(_arg_) dwc_debug_print_core_int_reg(_arg_,__func__)
++#define DWC_DBG_PRINT_CORE_INT_MASK(_arg_) dwc_debug_core_int_mask(_arg_,__func__)
++#define DWC_DBG_PRINT_OTG_INT(_arg_) dwc_debug_otg_int(_arg_,__func__)
++
++#else
++#define DWC_DBG_PRINT_CORE_INT(_arg_)
++#define DWC_DBG_PRINT_CORE_INT_MASK(_arg_)
++#define DWC_DBG_PRINT_OTG_INT(_arg_)
++
++#endif
++
++typedef enum {
++	FIQDBG_SCHED = (1 << 0),
++	FIQDBG_INT   = (1 << 1),
++	FIQDBG_ERR   = (1 << 2),
++	FIQDBG_PORTHUB = (1 << 3),
++} FIQDBG_T;
++
++void _fiq_print(FIQDBG_T dbg_lvl, char *fmt, ...);
++#ifdef FIQ_DEBUG
++#define fiq_print _fiq_print
++#else
++#define fiq_print(x, y, ...)
++#endif
++
++extern bool fiq_fix_enable, nak_holdoff_enable, fiq_split_enable;
++
++#endif
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,188 @@
++#ifndef _DWC_OS_DEP_H_
++#define _DWC_OS_DEP_H_
++
++/**
++ * @file
++ *
++ * This file contains OS dependent structures.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/errno.h>
++#include <linux/types.h>
++#include <linux/slab.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/ctype.h>
++#include <linux/string.h>
++#include <linux/dma-mapping.h>
++#include <linux/jiffies.h>
++#include <linux/delay.h>
++#include <linux/timer.h>
++#include <linux/workqueue.h>
++#include <linux/stat.h>
++#include <linux/pci.h>
++
++#include <linux/version.h>
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++# include <linux/irq.h>
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
++# include <linux/usb/ch9.h>
++#else
++# include <linux/usb_ch9.h>
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
++# include <linux/usb/gadget.h>
++#else
++# include <linux/usb_gadget.h>
++#endif
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++# include <asm/irq.h>
++#endif
++
++#ifdef PCI_INTERFACE
++# include <asm/io.h>
++#endif
++
++#ifdef LM_INTERFACE
++# include <asm/unaligned.h>
++# include <asm/sizes.h>
++# include <asm/param.h>
++# include <asm/io.h>
++# if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30))
++#  include <asm/arch/hardware.h>
++#  include <asm/arch/lm.h>
++#  include <asm/arch/irqs.h>
++#  include <asm/arch/regs-irq.h>
++# else
++/* in 2.6.31, at least, we seem to have lost the generic LM infrastructure -
++   here we assume that the machine architecture provides definitions
++   in its own header
++*/
++#  include <mach/lm.h>
++#  include <mach/hardware.h>
++# endif
++#endif
++
++#ifdef PLATFORM_INTERFACE
++#include <linux/platform_device.h>
++#include <asm/mach/map.h>
++#endif
++
++/** The OS page size */
++#define DWC_OS_PAGE_SIZE	PAGE_SIZE
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14)
++typedef int gfp_t;
++#endif
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)
++# define IRQF_SHARED SA_SHIRQ
++#endif
++
++typedef struct os_dependent {
++	/** Base address returned from ioremap() */
++	void *base;
++
++	/** Register offset for Diagnostic API */
++	uint32_t reg_offset;
++
++	/** Base address for MPHI peripheral */
++	void *mphi_base;
++
++#ifdef LM_INTERFACE
++	struct lm_device *lmdev;
++#elif  defined(PCI_INTERFACE)
++	struct pci_dev *pcidev;
++
++	/** Start address of a PCI region */
++	resource_size_t rsrc_start;
++
++	/** Length address of a PCI region */
++	resource_size_t rsrc_len;
++#elif  defined(PLATFORM_INTERFACE)
++	struct platform_device *platformdev;
++#endif
++
++} os_dependent_t;
++
++#ifdef __cplusplus
++}
++#endif
++
++
++
++/* Type for the our device on the chosen bus */
++#if   defined(LM_INTERFACE)
++typedef struct lm_device       dwc_bus_dev_t;
++#elif defined(PCI_INTERFACE)
++typedef struct pci_dev         dwc_bus_dev_t;
++#elif defined(PLATFORM_INTERFACE)
++typedef struct platform_device dwc_bus_dev_t;
++#endif
++
++/* Helper macro to retrieve drvdata from the device on the chosen bus */
++#if    defined(LM_INTERFACE)
++#define DWC_OTG_BUSDRVDATA(_dev) lm_get_drvdata(_dev)
++#elif  defined(PCI_INTERFACE)
++#define DWC_OTG_BUSDRVDATA(_dev) pci_get_drvdata(_dev)
++#elif  defined(PLATFORM_INTERFACE)
++#define DWC_OTG_BUSDRVDATA(_dev) platform_get_drvdata(_dev)
++#endif
++
++/**
++ * Helper macro returning the otg_device structure of a given struct device
++ *
++ * c.f. static dwc_otg_device_t *dwc_otg_drvdev(struct device *_dev)
++ */
++#ifdef LM_INTERFACE
++#define DWC_OTG_GETDRVDEV(_var, _dev) do { \
++                struct lm_device *lm_dev = \
++                        container_of(_dev, struct lm_device, dev); \
++                _var = lm_get_drvdata(lm_dev); \
++        } while (0)
++
++#elif defined(PCI_INTERFACE)
++#define DWC_OTG_GETDRVDEV(_var, _dev) do { \
++                _var = dev_get_drvdata(_dev); \
++        } while (0)
++
++#elif defined(PLATFORM_INTERFACE)
++#define DWC_OTG_GETDRVDEV(_var, _dev) do { \
++                struct platform_device *platform_dev = \
++                        container_of(_dev, struct platform_device, dev); \
++                _var = platform_get_drvdata(platform_dev); \
++        } while (0)
++#endif
++
++
++/**
++ * Helper macro returning the struct dev of the given struct os_dependent
++ *
++ * c.f. static struct device *dwc_otg_getdev(struct os_dependent *osdep)
++ */
++#ifdef LM_INTERFACE
++#define DWC_OTG_OS_GETDEV(_osdep) \
++        ((_osdep).lmdev == NULL? NULL: &(_osdep).lmdev->dev)
++#elif defined(PCI_INTERFACE)
++#define DWC_OTG_OS_GETDEV(_osdep) \
++        ((_osdep).pci_dev == NULL? NULL: &(_osdep).pci_dev->dev)
++#elif defined(PLATFORM_INTERFACE)
++#define DWC_OTG_OS_GETDEV(_osdep) \
++        ((_osdep).platformdev == NULL? NULL: &(_osdep).platformdev->dev)
++#endif
++
++
++
++
++#endif /* _DWC_OS_DEP_H_ */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_pcd.c linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_pcd.c
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_pcd.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_pcd.c	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,2708 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.c $
++ * $Revision: #101 $
++ * $Date: 2012/08/10 $
++ * $Change: 2047372 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_HOST_ONLY
++
++/** @file
++ * This file implements PCD Core. All code in this file is portable and doesn't
++ * use any OS specific functions.
++ * PCD Core provides Interface, defined in <code><dwc_otg_pcd_if.h></code>
++ * header file, which can be used to implement OS specific PCD interface.
++ *
++ * An important function of the PCD is managing interrupts generated
++ * by the DWC_otg controller. The implementation of the DWC_otg device
++ * mode interrupt service routines is in dwc_otg_pcd_intr.c.
++ *
++ * @todo Add Device Mode test modes (Test J mode, Test K mode, etc).
++ * @todo Does it work when the request size is greater than DEPTSIZ
++ * transfer size
++ *
++ */
++
++#include "dwc_otg_pcd.h"
++
++#ifdef DWC_UTE_CFI
++#include "dwc_otg_cfi.h"
++
++extern int init_cfi(cfiobject_t * cfiobj);
++#endif
++
++/**
++ * Choose endpoint from ep arrays using usb_ep structure.
++ */
++static dwc_otg_pcd_ep_t *get_ep_from_handle(dwc_otg_pcd_t * pcd, void *handle)
++{
++	int i;
++	if (pcd->ep0.priv == handle) {
++		return &pcd->ep0;
++	}
++	for (i = 0; i < MAX_EPS_CHANNELS - 1; i++) {
++		if (pcd->in_ep[i].priv == handle)
++			return &pcd->in_ep[i];
++		if (pcd->out_ep[i].priv == handle)
++			return &pcd->out_ep[i];
++	}
++
++	return NULL;
++}
++
++/**
++ * This function completes a request.  It call's the request call back.
++ */
++void dwc_otg_request_done(dwc_otg_pcd_ep_t * ep, dwc_otg_pcd_request_t * req,
++			  int32_t status)
++{
++	unsigned stopped = ep->stopped;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(ep %p req %p)\n", __func__, ep, req);
++	DWC_CIRCLEQ_REMOVE_INIT(&ep->queue, req, queue_entry);
++
++	/* don't modify queue heads during completion callback */
++	ep->stopped = 1;
++	/* spin_unlock/spin_lock now done in fops->complete() */
++	ep->pcd->fops->complete(ep->pcd, ep->priv, req->priv, status,
++				req->actual);
++
++	if (ep->pcd->request_pending > 0) {
++		--ep->pcd->request_pending;
++	}
++
++	ep->stopped = stopped;
++	DWC_FREE(req);
++}
++
++/**
++ * This function terminates all the requsts in the EP request queue.
++ */
++void dwc_otg_request_nuke(dwc_otg_pcd_ep_t * ep)
++{
++	dwc_otg_pcd_request_t *req;
++
++	ep->stopped = 1;
++
++	/* called with irqs blocked?? */
++	while (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++		req = DWC_CIRCLEQ_FIRST(&ep->queue);
++		dwc_otg_request_done(ep, req, -DWC_E_SHUTDOWN);
++	}
++}
++
++void dwc_otg_pcd_start(dwc_otg_pcd_t * pcd,
++		       const struct dwc_otg_pcd_function_ops *fops)
++{
++	pcd->fops = fops;
++}
++
++/**
++ * PCD Callback function for initializing the PCD when switching to
++ * device mode.
++ *
++ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
++ */
++static int32_t dwc_otg_pcd_start_cb(void *p)
++{
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++
++	/*
++	 * Initialized the Core for Device mode.
++	 */
++	if (dwc_otg_is_device_mode(core_if)) {
++		dwc_otg_core_dev_init(core_if);
++		/* Set core_if's lock pointer to the pcd->lock */
++		core_if->lock = pcd->lock;
++	}
++	return 1;
++}
++
++/** CFI-specific buffer allocation function for EP */
++#ifdef DWC_UTE_CFI
++uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep, dwc_dma_t * addr,
++			      size_t buflen, int flags)
++{
++	dwc_otg_pcd_ep_t *ep;
++	ep = get_ep_from_handle(pcd, pep);
++	if (!ep) {
++		DWC_WARN("bad ep\n");
++		return -DWC_E_INVALID;
++	}
++
++	return pcd->cfi->ops.ep_alloc_buf(pcd->cfi, pcd, ep, addr, buflen,
++					  flags);
++}
++#else
++uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep, dwc_dma_t * addr,
++			      size_t buflen, int flags);
++#endif
++
++/**
++ * PCD Callback function for notifying the PCD when resuming from
++ * suspend.
++ *
++ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
++ */
++static int32_t dwc_otg_pcd_resume_cb(void *p)
++{
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p;
++
++	if (pcd->fops->resume) {
++		pcd->fops->resume(pcd);
++	}
++
++	/* Stop the SRP timeout timer. */
++	if ((GET_CORE_IF(pcd)->core_params->phy_type != DWC_PHY_TYPE_PARAM_FS)
++	    || (!GET_CORE_IF(pcd)->core_params->i2c_enable)) {
++		if (GET_CORE_IF(pcd)->srp_timer_started) {
++			GET_CORE_IF(pcd)->srp_timer_started = 0;
++			DWC_TIMER_CANCEL(GET_CORE_IF(pcd)->srp_timer);
++		}
++	}
++	return 1;
++}
++
++/**
++ * PCD Callback function for notifying the PCD device is suspended.
++ *
++ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
++ */
++static int32_t dwc_otg_pcd_suspend_cb(void *p)
++{
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p;
++
++	if (pcd->fops->suspend) {
++		DWC_SPINUNLOCK(pcd->lock);
++		pcd->fops->suspend(pcd);
++		DWC_SPINLOCK(pcd->lock);
++	}
++
++	return 1;
++}
++
++/**
++ * PCD Callback function for stopping the PCD when switching to Host
++ * mode.
++ *
++ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
++ */
++static int32_t dwc_otg_pcd_stop_cb(void *p)
++{
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p;
++	extern void dwc_otg_pcd_stop(dwc_otg_pcd_t * _pcd);
++
++	dwc_otg_pcd_stop(pcd);
++	return 1;
++}
++
++/**
++ * PCD Callback structure for handling mode switching.
++ */
++static dwc_otg_cil_callbacks_t pcd_callbacks = {
++	.start = dwc_otg_pcd_start_cb,
++	.stop = dwc_otg_pcd_stop_cb,
++	.suspend = dwc_otg_pcd_suspend_cb,
++	.resume_wakeup = dwc_otg_pcd_resume_cb,
++	.p = 0,			/* Set at registration */
++};
++
++/**
++ * This function allocates a DMA Descriptor chain for the Endpoint
++ * buffer to be used for a transfer to/from the specified endpoint.
++ */
++dwc_otg_dev_dma_desc_t *dwc_otg_ep_alloc_desc_chain(dwc_dma_t * dma_desc_addr,
++						    uint32_t count)
++{
++	return DWC_DMA_ALLOC_ATOMIC(count * sizeof(dwc_otg_dev_dma_desc_t),
++							dma_desc_addr);
++}
++
++/**
++ * This function frees a DMA Descriptor chain that was allocated by ep_alloc_desc.
++ */
++void dwc_otg_ep_free_desc_chain(dwc_otg_dev_dma_desc_t * desc_addr,
++				uint32_t dma_desc_addr, uint32_t count)
++{
++	DWC_DMA_FREE(count * sizeof(dwc_otg_dev_dma_desc_t), desc_addr,
++		     dma_desc_addr);
++}
++
++#ifdef DWC_EN_ISOC
++
++/**
++ * This function initializes a descriptor chain for Isochronous transfer
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dwc_ep The EP to start the transfer on.
++ *
++ */
++void dwc_otg_iso_ep_start_ddma_transfer(dwc_otg_core_if_t * core_if,
++					dwc_ep_t * dwc_ep)
++{
++
++	dsts_data_t dsts = {.d32 = 0 };
++	depctl_data_t depctl = {.d32 = 0 };
++	volatile uint32_t *addr;
++	int i, j;
++	uint32_t len;
++
++	if (dwc_ep->is_in)
++		dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl / dwc_ep->bInterval;
++	else
++		dwc_ep->desc_cnt =
++		    dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm /
++		    dwc_ep->bInterval;
++
++	/** Allocate descriptors for double buffering */
++	dwc_ep->iso_desc_addr =
++	    dwc_otg_ep_alloc_desc_chain(&dwc_ep->iso_dma_desc_addr,
++					dwc_ep->desc_cnt * 2);
++	if (dwc_ep->desc_addr) {
++		DWC_WARN("%s, can't allocate DMA descriptor chain\n", __func__);
++		return;
++	}
++
++	dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
++
++	/** ISO OUT EP */
++	if (dwc_ep->is_in == 0) {
++		dev_dma_desc_sts_t sts = {.d32 = 0 };
++		dwc_otg_dev_dma_desc_t *dma_desc = dwc_ep->iso_desc_addr;
++		dma_addr_t dma_ad;
++		uint32_t data_per_desc;
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++		    core_if->dev_if->out_ep_regs[dwc_ep->num];
++		int offset;
++
++		addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
++		dma_ad = (dma_addr_t) DWC_READ_REG32(&(out_regs->doepdma));
++
++		/** Buffer 0 descriptors setup */
++		dma_ad = dwc_ep->dma_addr0;
++
++		sts.b_iso_out.bs = BS_HOST_READY;
++		sts.b_iso_out.rxsts = 0;
++		sts.b_iso_out.l = 0;
++		sts.b_iso_out.sp = 0;
++		sts.b_iso_out.ioc = 0;
++		sts.b_iso_out.pid = 0;
++		sts.b_iso_out.framenum = 0;
++
++		offset = 0;
++		for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm;
++		     i += dwc_ep->pkt_per_frm) {
++
++			for (j = 0; j < dwc_ep->pkt_per_frm; ++j) {
++				uint32_t len = (j + 1) * dwc_ep->maxpacket;
++				if (len > dwc_ep->data_per_frame)
++					data_per_desc =
++					    dwc_ep->data_per_frame -
++					    j * dwc_ep->maxpacket;
++				else
++					data_per_desc = dwc_ep->maxpacket;
++				len = data_per_desc % 4;
++				if (len)
++					data_per_desc += 4 - len;
++
++				sts.b_iso_out.rxbytes = data_per_desc;
++				dma_desc->buf = dma_ad;
++				dma_desc->status.d32 = sts.d32;
++
++				offset += data_per_desc;
++				dma_desc++;
++				dma_ad += data_per_desc;
++			}
++		}
++
++		for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) {
++			uint32_t len = (j + 1) * dwc_ep->maxpacket;
++			if (len > dwc_ep->data_per_frame)
++				data_per_desc =
++				    dwc_ep->data_per_frame -
++				    j * dwc_ep->maxpacket;
++			else
++				data_per_desc = dwc_ep->maxpacket;
++			len = data_per_desc % 4;
++			if (len)
++				data_per_desc += 4 - len;
++			sts.b_iso_out.rxbytes = data_per_desc;
++			dma_desc->buf = dma_ad;
++			dma_desc->status.d32 = sts.d32;
++
++			offset += data_per_desc;
++			dma_desc++;
++			dma_ad += data_per_desc;
++		}
++
++		sts.b_iso_out.ioc = 1;
++		len = (j + 1) * dwc_ep->maxpacket;
++		if (len > dwc_ep->data_per_frame)
++			data_per_desc =
++			    dwc_ep->data_per_frame - j * dwc_ep->maxpacket;
++		else
++			data_per_desc = dwc_ep->maxpacket;
++		len = data_per_desc % 4;
++		if (len)
++			data_per_desc += 4 - len;
++		sts.b_iso_out.rxbytes = data_per_desc;
++
++		dma_desc->buf = dma_ad;
++		dma_desc->status.d32 = sts.d32;
++		dma_desc++;
++
++		/** Buffer 1 descriptors setup */
++		sts.b_iso_out.ioc = 0;
++		dma_ad = dwc_ep->dma_addr1;
++
++		offset = 0;
++		for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm;
++		     i += dwc_ep->pkt_per_frm) {
++			for (j = 0; j < dwc_ep->pkt_per_frm; ++j) {
++				uint32_t len = (j + 1) * dwc_ep->maxpacket;
++				if (len > dwc_ep->data_per_frame)
++					data_per_desc =
++					    dwc_ep->data_per_frame -
++					    j * dwc_ep->maxpacket;
++				else
++					data_per_desc = dwc_ep->maxpacket;
++				len = data_per_desc % 4;
++				if (len)
++					data_per_desc += 4 - len;
++
++				data_per_desc =
++				    sts.b_iso_out.rxbytes = data_per_desc;
++				dma_desc->buf = dma_ad;
++				dma_desc->status.d32 = sts.d32;
++
++				offset += data_per_desc;
++				dma_desc++;
++				dma_ad += data_per_desc;
++			}
++		}
++		for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) {
++			data_per_desc =
++			    ((j + 1) * dwc_ep->maxpacket >
++			     dwc_ep->data_per_frame) ? dwc_ep->data_per_frame -
++			    j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++			data_per_desc +=
++			    (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0;
++			sts.b_iso_out.rxbytes = data_per_desc;
++			dma_desc->buf = dma_ad;
++			dma_desc->status.d32 = sts.d32;
++
++			offset += data_per_desc;
++			dma_desc++;
++			dma_ad += data_per_desc;
++		}
++
++		sts.b_iso_out.ioc = 1;
++		sts.b_iso_out.l = 1;
++		data_per_desc =
++		    ((j + 1) * dwc_ep->maxpacket >
++		     dwc_ep->data_per_frame) ? dwc_ep->data_per_frame -
++		    j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++		data_per_desc +=
++		    (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0;
++		sts.b_iso_out.rxbytes = data_per_desc;
++
++		dma_desc->buf = dma_ad;
++		dma_desc->status.d32 = sts.d32;
++
++		dwc_ep->next_frame = 0;
++
++		/** Write dma_ad into DOEPDMA register */
++		DWC_WRITE_REG32(&(out_regs->doepdma),
++				(uint32_t) dwc_ep->iso_dma_desc_addr);
++
++	}
++	/** ISO IN EP */
++	else {
++		dev_dma_desc_sts_t sts = {.d32 = 0 };
++		dwc_otg_dev_dma_desc_t *dma_desc = dwc_ep->iso_desc_addr;
++		dma_addr_t dma_ad;
++		dwc_otg_dev_in_ep_regs_t *in_regs =
++		    core_if->dev_if->in_ep_regs[dwc_ep->num];
++		unsigned int frmnumber;
++		fifosize_data_t txfifosize, rxfifosize;
++
++		txfifosize.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->in_ep_regs[dwc_ep->num]->
++				   dtxfsts);
++		rxfifosize.d32 =
++		    DWC_READ_REG32(&core_if->core_global_regs->grxfsiz);
++
++		addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
++
++		dma_ad = dwc_ep->dma_addr0;
++
++		dsts.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
++
++		sts.b_iso_in.bs = BS_HOST_READY;
++		sts.b_iso_in.txsts = 0;
++		sts.b_iso_in.sp =
++		    (dwc_ep->data_per_frame % dwc_ep->maxpacket) ? 1 : 0;
++		sts.b_iso_in.ioc = 0;
++		sts.b_iso_in.pid = dwc_ep->pkt_per_frm;
++
++		frmnumber = dwc_ep->next_frame;
++
++		sts.b_iso_in.framenum = frmnumber;
++		sts.b_iso_in.txbytes = dwc_ep->data_per_frame;
++		sts.b_iso_in.l = 0;
++
++		/** Buffer 0 descriptors setup */
++		for (i = 0; i < dwc_ep->desc_cnt - 1; i++) {
++			dma_desc->buf = dma_ad;
++			dma_desc->status.d32 = sts.d32;
++			dma_desc++;
++
++			dma_ad += dwc_ep->data_per_frame;
++			sts.b_iso_in.framenum += dwc_ep->bInterval;
++		}
++
++		sts.b_iso_in.ioc = 1;
++		dma_desc->buf = dma_ad;
++		dma_desc->status.d32 = sts.d32;
++		++dma_desc;
++
++		/** Buffer 1 descriptors setup */
++		sts.b_iso_in.ioc = 0;
++		dma_ad = dwc_ep->dma_addr1;
++
++		for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm;
++		     i += dwc_ep->pkt_per_frm) {
++			dma_desc->buf = dma_ad;
++			dma_desc->status.d32 = sts.d32;
++			dma_desc++;
++
++			dma_ad += dwc_ep->data_per_frame;
++			sts.b_iso_in.framenum += dwc_ep->bInterval;
++
++			sts.b_iso_in.ioc = 0;
++		}
++		sts.b_iso_in.ioc = 1;
++		sts.b_iso_in.l = 1;
++
++		dma_desc->buf = dma_ad;
++		dma_desc->status.d32 = sts.d32;
++
++		dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval;
++
++		/** Write dma_ad into diepdma register */
++		DWC_WRITE_REG32(&(in_regs->diepdma),
++				(uint32_t) dwc_ep->iso_dma_desc_addr);
++	}
++	/** Enable endpoint, clear nak  */
++	depctl.d32 = 0;
++	depctl.b.epena = 1;
++	depctl.b.usbactep = 1;
++	depctl.b.cnak = 1;
++
++	DWC_MODIFY_REG32(addr, depctl.d32, depctl.d32);
++	depctl.d32 = DWC_READ_REG32(addr);
++}
++
++/**
++ * This function initializes a descriptor chain for Isochronous transfer
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t * core_if,
++				       dwc_ep_t * ep)
++{
++	depctl_data_t depctl = {.d32 = 0 };
++	volatile uint32_t *addr;
++
++	if (ep->is_in) {
++		addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
++	} else {
++		addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
++	}
++
++	if (core_if->dma_enable == 0 || core_if->dma_desc_enable != 0) {
++		return;
++	} else {
++		deptsiz_data_t deptsiz = {.d32 = 0 };
++
++		ep->xfer_len =
++		    ep->data_per_frame * ep->buf_proc_intrvl / ep->bInterval;
++		ep->pkt_cnt =
++		    (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket;
++		ep->xfer_count = 0;
++		ep->xfer_buff =
++		    (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
++		ep->dma_addr =
++		    (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
++
++		if (ep->is_in) {
++			/* Program the transfer size and packet count
++			 *      as follows: xfersize = N * maxpacket +
++			 *      short_packet pktcnt = N + (short_packet
++			 *      exist ? 1 : 0)
++			 */
++			deptsiz.b.mc = ep->pkt_per_frm;
++			deptsiz.b.xfersize = ep->xfer_len;
++			deptsiz.b.pktcnt =
++			    (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket;
++			DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
++					dieptsiz, deptsiz.d32);
++
++			/* Write the DMA register */
++			DWC_WRITE_REG32(&
++					(core_if->dev_if->in_ep_regs[ep->num]->
++					 diepdma), (uint32_t) ep->dma_addr);
++
++		} else {
++			deptsiz.b.pktcnt =
++			    (ep->xfer_len + (ep->maxpacket - 1)) /
++			    ep->maxpacket;
++			deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
++
++			DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]->
++					doeptsiz, deptsiz.d32);
++
++			/* Write the DMA register */
++			DWC_WRITE_REG32(&
++					(core_if->dev_if->out_ep_regs[ep->num]->
++					 doepdma), (uint32_t) ep->dma_addr);
++
++		}
++		/** Enable endpoint, clear nak  */
++		depctl.d32 = 0;
++		depctl.b.epena = 1;
++		depctl.b.cnak = 1;
++
++		DWC_MODIFY_REG32(addr, depctl.d32, depctl.d32);
++	}
++}
++
++/**
++ * This function does the setup for a data transfer for an EP and
++ * starts the transfer. For an IN transfer, the packets will be
++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
++ * the packets are unloaded from the Rx FIFO in the ISR.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ */
++
++static void dwc_otg_iso_ep_start_transfer(dwc_otg_core_if_t * core_if,
++					  dwc_ep_t * ep)
++{
++	if (core_if->dma_enable) {
++		if (core_if->dma_desc_enable) {
++			if (ep->is_in) {
++				ep->desc_cnt = ep->pkt_cnt / ep->pkt_per_frm;
++			} else {
++				ep->desc_cnt = ep->pkt_cnt;
++			}
++			dwc_otg_iso_ep_start_ddma_transfer(core_if, ep);
++		} else {
++			if (core_if->pti_enh_enable) {
++				dwc_otg_iso_ep_start_buf_transfer(core_if, ep);
++			} else {
++				ep->cur_pkt_addr =
++				    (ep->proc_buf_num) ? ep->xfer_buff1 : ep->
++				    xfer_buff0;
++				ep->cur_pkt_dma_addr =
++				    (ep->proc_buf_num) ? ep->dma_addr1 : ep->
++				    dma_addr0;
++				dwc_otg_iso_ep_start_frm_transfer(core_if, ep);
++			}
++		}
++	} else {
++		ep->cur_pkt_addr =
++		    (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
++		ep->cur_pkt_dma_addr =
++		    (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
++		dwc_otg_iso_ep_start_frm_transfer(core_if, ep);
++	}
++}
++
++/**
++ * This function stops transfer for an EP and
++ * resets the ep's variables.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ */
++
++void dwc_otg_iso_ep_stop_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	depctl_data_t depctl = {.d32 = 0 };
++	volatile uint32_t *addr;
++
++	if (ep->is_in == 1) {
++		addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
++	} else {
++		addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
++	}
++
++	/* disable the ep */
++	depctl.d32 = DWC_READ_REG32(addr);
++
++	depctl.b.epdis = 1;
++	depctl.b.snak = 1;
++
++	DWC_WRITE_REG32(addr, depctl.d32);
++
++	if (core_if->dma_desc_enable &&
++	    ep->iso_desc_addr && ep->iso_dma_desc_addr) {
++		dwc_otg_ep_free_desc_chain(ep->iso_desc_addr,
++					   ep->iso_dma_desc_addr,
++					   ep->desc_cnt * 2);
++	}
++
++	/* reset varibales */
++	ep->dma_addr0 = 0;
++	ep->dma_addr1 = 0;
++	ep->xfer_buff0 = 0;
++	ep->xfer_buff1 = 0;
++	ep->data_per_frame = 0;
++	ep->data_pattern_frame = 0;
++	ep->sync_frame = 0;
++	ep->buf_proc_intrvl = 0;
++	ep->bInterval = 0;
++	ep->proc_buf_num = 0;
++	ep->pkt_per_frm = 0;
++	ep->pkt_per_frm = 0;
++	ep->desc_cnt = 0;
++	ep->iso_desc_addr = 0;
++	ep->iso_dma_desc_addr = 0;
++}
++
++int dwc_otg_pcd_iso_ep_start(dwc_otg_pcd_t * pcd, void *ep_handle,
++			     uint8_t * buf0, uint8_t * buf1, dwc_dma_t dma0,
++			     dwc_dma_t dma1, int sync_frame, int dp_frame,
++			     int data_per_frame, int start_frame,
++			     int buf_proc_intrvl, void *req_handle,
++			     int atomic_alloc)
++{
++	dwc_otg_pcd_ep_t *ep;
++	dwc_irqflags_t flags = 0;
++	dwc_ep_t *dwc_ep;
++	int32_t frm_data;
++	dsts_data_t dsts;
++	dwc_otg_core_if_t *core_if;
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++
++	if (!ep || !ep->desc || ep->dwc_ep.num == 0) {
++		DWC_WARN("bad ep\n");
++		return -DWC_E_INVALID;
++	}
++
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++	core_if = GET_CORE_IF(pcd);
++	dwc_ep = &ep->dwc_ep;
++
++	if (ep->iso_req_handle) {
++		DWC_WARN("ISO request in progress\n");
++	}
++
++	dwc_ep->dma_addr0 = dma0;
++	dwc_ep->dma_addr1 = dma1;
++
++	dwc_ep->xfer_buff0 = buf0;
++	dwc_ep->xfer_buff1 = buf1;
++
++	dwc_ep->data_per_frame = data_per_frame;
++
++	/** @todo - pattern data support is to be implemented in the future */
++	dwc_ep->data_pattern_frame = dp_frame;
++	dwc_ep->sync_frame = sync_frame;
++
++	dwc_ep->buf_proc_intrvl = buf_proc_intrvl;
++
++	dwc_ep->bInterval = 1 << (ep->desc->bInterval - 1);
++
++	dwc_ep->proc_buf_num = 0;
++
++	dwc_ep->pkt_per_frm = 0;
++	frm_data = ep->dwc_ep.data_per_frame;
++	while (frm_data > 0) {
++		dwc_ep->pkt_per_frm++;
++		frm_data -= ep->dwc_ep.maxpacket;
++	}
++
++	dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
++
++	if (start_frame == -1) {
++		dwc_ep->next_frame = dsts.b.soffn + 1;
++		if (dwc_ep->bInterval != 1) {
++			dwc_ep->next_frame =
++			    dwc_ep->next_frame + (dwc_ep->bInterval - 1 -
++						  dwc_ep->next_frame %
++						  dwc_ep->bInterval);
++		}
++	} else {
++		dwc_ep->next_frame = start_frame;
++	}
++
++	if (!core_if->pti_enh_enable) {
++		dwc_ep->pkt_cnt =
++		    dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm /
++		    dwc_ep->bInterval;
++	} else {
++		dwc_ep->pkt_cnt =
++		    (dwc_ep->data_per_frame *
++		     (dwc_ep->buf_proc_intrvl / dwc_ep->bInterval)
++		     - 1 + dwc_ep->maxpacket) / dwc_ep->maxpacket;
++	}
++
++	if (core_if->dma_desc_enable) {
++		dwc_ep->desc_cnt =
++		    dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm /
++		    dwc_ep->bInterval;
++	}
++
++	if (atomic_alloc) {
++		dwc_ep->pkt_info =
++		    DWC_ALLOC_ATOMIC(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt);
++	} else {
++		dwc_ep->pkt_info =
++		    DWC_ALLOC(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt);
++	}
++	if (!dwc_ep->pkt_info) {
++		DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++		return -DWC_E_NO_MEMORY;
++	}
++	if (core_if->pti_enh_enable) {
++		dwc_memset(dwc_ep->pkt_info, 0,
++			   sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt);
++	}
++
++	dwc_ep->cur_pkt = 0;
++	ep->iso_req_handle = req_handle;
++
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++	dwc_otg_iso_ep_start_transfer(core_if, dwc_ep);
++	return 0;
++}
++
++int dwc_otg_pcd_iso_ep_stop(dwc_otg_pcd_t * pcd, void *ep_handle,
++			    void *req_handle)
++{
++	dwc_irqflags_t flags = 0;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_ep_t *dwc_ep;
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++	if (!ep || !ep->desc || ep->dwc_ep.num == 0) {
++		DWC_WARN("bad ep\n");
++		return -DWC_E_INVALID;
++	}
++	dwc_ep = &ep->dwc_ep;
++
++	dwc_otg_iso_ep_stop_transfer(GET_CORE_IF(pcd), dwc_ep);
++
++	DWC_FREE(dwc_ep->pkt_info);
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++	if (ep->iso_req_handle != req_handle) {
++		DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++		return -DWC_E_INVALID;
++	}
++
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++
++	ep->iso_req_handle = 0;
++	return 0;
++}
++
++/**
++ * This function is used for perodical data exchnage between PCD and gadget drivers.
++ * for Isochronous EPs
++ *
++ *	- Every time a sync period completes this function is called to
++ *	  perform data exchange between PCD and gadget
++ */
++void dwc_otg_iso_buffer_done(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep,
++			     void *req_handle)
++{
++	int i;
++	dwc_ep_t *dwc_ep;
++
++	dwc_ep = &ep->dwc_ep;
++
++	DWC_SPINUNLOCK(ep->pcd->lock);
++	pcd->fops->isoc_complete(pcd, ep->priv, ep->iso_req_handle,
++				 dwc_ep->proc_buf_num ^ 0x1);
++	DWC_SPINLOCK(ep->pcd->lock);
++
++	for (i = 0; i < dwc_ep->pkt_cnt; ++i) {
++		dwc_ep->pkt_info[i].status = 0;
++		dwc_ep->pkt_info[i].offset = 0;
++		dwc_ep->pkt_info[i].length = 0;
++	}
++}
++
++int dwc_otg_pcd_get_iso_packet_count(dwc_otg_pcd_t * pcd, void *ep_handle,
++				     void *iso_req_handle)
++{
++	dwc_otg_pcd_ep_t *ep;
++	dwc_ep_t *dwc_ep;
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++	if (!ep->desc || ep->dwc_ep.num == 0) {
++		DWC_WARN("bad ep\n");
++		return -DWC_E_INVALID;
++	}
++	dwc_ep = &ep->dwc_ep;
++
++	return dwc_ep->pkt_cnt;
++}
++
++void dwc_otg_pcd_get_iso_packet_params(dwc_otg_pcd_t * pcd, void *ep_handle,
++				       void *iso_req_handle, int packet,
++				       int *status, int *actual, int *offset)
++{
++	dwc_otg_pcd_ep_t *ep;
++	dwc_ep_t *dwc_ep;
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++	if (!ep)
++		DWC_WARN("bad ep\n");
++
++	dwc_ep = &ep->dwc_ep;
++
++	*status = dwc_ep->pkt_info[packet].status;
++	*actual = dwc_ep->pkt_info[packet].length;
++	*offset = dwc_ep->pkt_info[packet].offset;
++}
++
++#endif /* DWC_EN_ISOC */
++
++static void dwc_otg_pcd_init_ep(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * pcd_ep,
++				uint32_t is_in, uint32_t ep_num)
++{
++	/* Init EP structure */
++	pcd_ep->desc = 0;
++	pcd_ep->pcd = pcd;
++	pcd_ep->stopped = 1;
++	pcd_ep->queue_sof = 0;
++
++	/* Init DWC ep structure */
++	pcd_ep->dwc_ep.is_in = is_in;
++	pcd_ep->dwc_ep.num = ep_num;
++	pcd_ep->dwc_ep.active = 0;
++	pcd_ep->dwc_ep.tx_fifo_num = 0;
++	/* Control until ep is actvated */
++	pcd_ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
++	pcd_ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
++	pcd_ep->dwc_ep.dma_addr = 0;
++	pcd_ep->dwc_ep.start_xfer_buff = 0;
++	pcd_ep->dwc_ep.xfer_buff = 0;
++	pcd_ep->dwc_ep.xfer_len = 0;
++	pcd_ep->dwc_ep.xfer_count = 0;
++	pcd_ep->dwc_ep.sent_zlp = 0;
++	pcd_ep->dwc_ep.total_len = 0;
++	pcd_ep->dwc_ep.desc_addr = 0;
++	pcd_ep->dwc_ep.dma_desc_addr = 0;
++	DWC_CIRCLEQ_INIT(&pcd_ep->queue);
++}
++
++/**
++ * Initialize ep's
++ */
++static void dwc_otg_pcd_reinit(dwc_otg_pcd_t * pcd)
++{
++	int i;
++	uint32_t hwcfg1;
++	dwc_otg_pcd_ep_t *ep;
++	int in_ep_cntr, out_ep_cntr;
++	uint32_t num_in_eps = (GET_CORE_IF(pcd))->dev_if->num_in_eps;
++	uint32_t num_out_eps = (GET_CORE_IF(pcd))->dev_if->num_out_eps;
++
++	/**
++	 * Initialize the EP0 structure.
++	 */
++	ep = &pcd->ep0;
++	dwc_otg_pcd_init_ep(pcd, ep, 0, 0);
++
++	in_ep_cntr = 0;
++	hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 3;
++	for (i = 1; in_ep_cntr < num_in_eps; i++) {
++		if ((hwcfg1 & 0x1) == 0) {
++			dwc_otg_pcd_ep_t *ep = &pcd->in_ep[in_ep_cntr];
++			in_ep_cntr++;
++			/**
++			 * @todo NGS: Add direction to EP, based on contents
++			 * of HWCFG1.  Need a copy of HWCFG1 in pcd structure?
++			 * sprintf(";r
++			 */
++			dwc_otg_pcd_init_ep(pcd, ep, 1 /* IN */ , i);
++
++			DWC_CIRCLEQ_INIT(&ep->queue);
++		}
++		hwcfg1 >>= 2;
++	}
++
++	out_ep_cntr = 0;
++	hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 2;
++	for (i = 1; out_ep_cntr < num_out_eps; i++) {
++		if ((hwcfg1 & 0x1) == 0) {
++			dwc_otg_pcd_ep_t *ep = &pcd->out_ep[out_ep_cntr];
++			out_ep_cntr++;
++			/**
++			 * @todo NGS: Add direction to EP, based on contents
++			 * of HWCFG1.  Need a copy of HWCFG1 in pcd structure?
++			 * sprintf(";r
++			 */
++			dwc_otg_pcd_init_ep(pcd, ep, 0 /* OUT */ , i);
++			DWC_CIRCLEQ_INIT(&ep->queue);
++		}
++		hwcfg1 >>= 2;
++	}
++
++	pcd->ep0state = EP0_DISCONNECT;
++	pcd->ep0.dwc_ep.maxpacket = MAX_EP0_SIZE;
++	pcd->ep0.dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
++}
++
++/**
++ * This function is called when the SRP timer expires. The SRP should
++ * complete within 6 seconds.
++ */
++static void srp_timeout(void *ptr)
++{
++	gotgctl_data_t gotgctl;
++	dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr;
++	volatile uint32_t *addr = &core_if->core_global_regs->gotgctl;
++
++	gotgctl.d32 = DWC_READ_REG32(addr);
++
++	core_if->srp_timer_started = 0;
++
++	if (core_if->adp_enable) {
++		if (gotgctl.b.bsesvld == 0) {
++			gpwrdn_data_t gpwrdn = {.d32 = 0 };
++			DWC_PRINTF("SRP Timeout BSESSVLD = 0\n");
++			/* Power off the core */
++			if (core_if->power_down == 2) {
++				gpwrdn.b.pwrdnswtch = 1;
++				DWC_MODIFY_REG32(&core_if->
++						 core_global_regs->gpwrdn,
++						 gpwrdn.d32, 0);
++			}
++
++			gpwrdn.d32 = 0;
++			gpwrdn.b.pmuintsel = 1;
++			gpwrdn.b.pmuactv = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0,
++					 gpwrdn.d32);
++			dwc_otg_adp_probe_start(core_if);
++		} else {
++			DWC_PRINTF("SRP Timeout BSESSVLD = 1\n");
++			core_if->op_state = B_PERIPHERAL;
++			dwc_otg_core_init(core_if);
++			dwc_otg_enable_global_interrupts(core_if);
++			cil_pcd_start(core_if);
++		}
++	}
++
++	if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) &&
++	    (core_if->core_params->i2c_enable)) {
++		DWC_PRINTF("SRP Timeout\n");
++
++		if ((core_if->srp_success) && (gotgctl.b.bsesvld)) {
++			if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
++				core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
++			}
++
++			/* Clear Session Request */
++			gotgctl.d32 = 0;
++			gotgctl.b.sesreq = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gotgctl,
++					 gotgctl.d32, 0);
++
++			core_if->srp_success = 0;
++		} else {
++			__DWC_ERROR("Device not connected/responding\n");
++			gotgctl.b.sesreq = 0;
++			DWC_WRITE_REG32(addr, gotgctl.d32);
++		}
++	} else if (gotgctl.b.sesreq) {
++		DWC_PRINTF("SRP Timeout\n");
++
++		__DWC_ERROR("Device not connected/responding\n");
++		gotgctl.b.sesreq = 0;
++		DWC_WRITE_REG32(addr, gotgctl.d32);
++	} else {
++		DWC_PRINTF(" SRP GOTGCTL=%0x\n", gotgctl.d32);
++	}
++}
++
++/**
++ * Tasklet
++ *
++ */
++extern void start_next_request(dwc_otg_pcd_ep_t * ep);
++
++static void start_xfer_tasklet_func(void *data)
++{
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) data;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++
++	int i;
++	depctl_data_t diepctl;
++
++	DWC_DEBUGPL(DBG_PCDV, "Start xfer tasklet\n");
++
++	diepctl.d32 = DWC_READ_REG32(&core_if->dev_if->in_ep_regs[0]->diepctl);
++
++	if (pcd->ep0.queue_sof) {
++		pcd->ep0.queue_sof = 0;
++		start_next_request(&pcd->ep0);
++		// break;
++	}
++
++	for (i = 0; i < core_if->dev_if->num_in_eps; i++) {
++		depctl_data_t diepctl;
++		diepctl.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl);
++
++		if (pcd->in_ep[i].queue_sof) {
++			pcd->in_ep[i].queue_sof = 0;
++			start_next_request(&pcd->in_ep[i]);
++			// break;
++		}
++	}
++
++	return;
++}
++
++/**
++ * This function initialized the PCD portion of the driver.
++ *
++ */
++dwc_otg_pcd_t *dwc_otg_pcd_init(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_pcd_t *pcd = NULL;
++	dwc_otg_dev_if_t *dev_if;
++	int i;
++
++	/*
++	 * Allocate PCD structure
++	 */
++	pcd = DWC_ALLOC(sizeof(dwc_otg_pcd_t));
++
++	if (pcd == NULL) {
++		return NULL;
++	}
++
++	pcd->lock = DWC_SPINLOCK_ALLOC();
++        DWC_DEBUGPL(DBG_HCDV, "Init of PCD %p given core_if %p\n",
++                    pcd, core_if);//GRAYG
++	if (!pcd->lock) {
++		DWC_ERROR("Could not allocate lock for pcd");
++		DWC_FREE(pcd);
++		return NULL;
++	}
++	/* Set core_if's lock pointer to hcd->lock */
++	core_if->lock = pcd->lock;
++	pcd->core_if = core_if;
++
++	dev_if = core_if->dev_if;
++	dev_if->isoc_ep = NULL;
++
++	if (core_if->hwcfg4.b.ded_fifo_en) {
++		DWC_PRINTF("Dedicated Tx FIFOs mode\n");
++	} else {
++		DWC_PRINTF("Shared Tx FIFO mode\n");
++	}
++
++	/*
++	 * Initialized the Core for Device mode here if there is nod ADP support.
++	 * Otherwise it will be done later in dwc_otg_adp_start routine.
++	 */
++	if (dwc_otg_is_device_mode(core_if) /*&& !core_if->adp_enable*/) {
++		dwc_otg_core_dev_init(core_if);
++	}
++
++	/*
++	 * Register the PCD Callbacks.
++	 */
++	dwc_otg_cil_register_pcd_callbacks(core_if, &pcd_callbacks, pcd);
++
++	/*
++	 * Initialize the DMA buffer for SETUP packets
++	 */
++	if (GET_CORE_IF(pcd)->dma_enable) {
++		pcd->setup_pkt =
++		    DWC_DMA_ALLOC(sizeof(*pcd->setup_pkt) * 5,
++				  &pcd->setup_pkt_dma_handle);
++		if (pcd->setup_pkt == NULL) {
++			DWC_FREE(pcd);
++			return NULL;
++		}
++
++		pcd->status_buf =
++		    DWC_DMA_ALLOC(sizeof(uint16_t),
++				  &pcd->status_buf_dma_handle);
++		if (pcd->status_buf == NULL) {
++			DWC_DMA_FREE(sizeof(*pcd->setup_pkt) * 5,
++				     pcd->setup_pkt, pcd->setup_pkt_dma_handle);
++			DWC_FREE(pcd);
++			return NULL;
++		}
++
++		if (GET_CORE_IF(pcd)->dma_desc_enable) {
++			dev_if->setup_desc_addr[0] =
++			    dwc_otg_ep_alloc_desc_chain
++			    (&dev_if->dma_setup_desc_addr[0], 1);
++			dev_if->setup_desc_addr[1] =
++			    dwc_otg_ep_alloc_desc_chain
++			    (&dev_if->dma_setup_desc_addr[1], 1);
++			dev_if->in_desc_addr =
++			    dwc_otg_ep_alloc_desc_chain
++			    (&dev_if->dma_in_desc_addr, 1);
++			dev_if->out_desc_addr =
++			    dwc_otg_ep_alloc_desc_chain
++			    (&dev_if->dma_out_desc_addr, 1);
++			pcd->data_terminated = 0;
++
++			if (dev_if->setup_desc_addr[0] == 0
++			    || dev_if->setup_desc_addr[1] == 0
++			    || dev_if->in_desc_addr == 0
++			    || dev_if->out_desc_addr == 0) {
++
++				if (dev_if->out_desc_addr)
++					dwc_otg_ep_free_desc_chain
++					    (dev_if->out_desc_addr,
++					     dev_if->dma_out_desc_addr, 1);
++				if (dev_if->in_desc_addr)
++					dwc_otg_ep_free_desc_chain
++					    (dev_if->in_desc_addr,
++					     dev_if->dma_in_desc_addr, 1);
++				if (dev_if->setup_desc_addr[1])
++					dwc_otg_ep_free_desc_chain
++					    (dev_if->setup_desc_addr[1],
++					     dev_if->dma_setup_desc_addr[1], 1);
++				if (dev_if->setup_desc_addr[0])
++					dwc_otg_ep_free_desc_chain
++					    (dev_if->setup_desc_addr[0],
++					     dev_if->dma_setup_desc_addr[0], 1);
++
++				DWC_DMA_FREE(sizeof(*pcd->setup_pkt) * 5,
++					     pcd->setup_pkt,
++					     pcd->setup_pkt_dma_handle);
++				DWC_DMA_FREE(sizeof(*pcd->status_buf),
++					     pcd->status_buf,
++					     pcd->status_buf_dma_handle);
++
++				DWC_FREE(pcd);
++
++				return NULL;
++			}
++		}
++	} else {
++		pcd->setup_pkt = DWC_ALLOC(sizeof(*pcd->setup_pkt) * 5);
++		if (pcd->setup_pkt == NULL) {
++			DWC_FREE(pcd);
++			return NULL;
++		}
++
++		pcd->status_buf = DWC_ALLOC(sizeof(uint16_t));
++		if (pcd->status_buf == NULL) {
++			DWC_FREE(pcd->setup_pkt);
++			DWC_FREE(pcd);
++			return NULL;
++		}
++	}
++
++	dwc_otg_pcd_reinit(pcd);
++
++	/* Allocate the cfi object for the PCD */
++#ifdef DWC_UTE_CFI
++	pcd->cfi = DWC_ALLOC(sizeof(cfiobject_t));
++	if (NULL == pcd->cfi)
++		goto fail;
++	if (init_cfi(pcd->cfi)) {
++		CFI_INFO("%s: Failed to init the CFI object\n", __func__);
++		goto fail;
++	}
++#endif
++
++	/* Initialize tasklets */
++	pcd->start_xfer_tasklet = DWC_TASK_ALLOC("xfer_tasklet",
++						 start_xfer_tasklet_func, pcd);
++	pcd->test_mode_tasklet = DWC_TASK_ALLOC("test_mode_tasklet",
++						do_test_mode, pcd);
++
++	/* Initialize SRP timer */
++	core_if->srp_timer = DWC_TIMER_ALLOC("SRP TIMER", srp_timeout, core_if);
++
++	if (core_if->core_params->dev_out_nak) {
++		/**
++		* Initialize xfer timeout timer. Implemented for
++		* 2.93a feature "Device DDMA OUT NAK Enhancement"
++		*/
++		for(i = 0; i < MAX_EPS_CHANNELS; i++) {
++			pcd->core_if->ep_xfer_timer[i] =
++				DWC_TIMER_ALLOC("ep timer", ep_xfer_timeout,
++				&pcd->core_if->ep_xfer_info[i]);
++		}
++	}
++
++	return pcd;
++#ifdef DWC_UTE_CFI
++fail:
++#endif
++	if (pcd->setup_pkt)
++		DWC_FREE(pcd->setup_pkt);
++	if (pcd->status_buf)
++		DWC_FREE(pcd->status_buf);
++#ifdef DWC_UTE_CFI
++	if (pcd->cfi)
++		DWC_FREE(pcd->cfi);
++#endif
++	if (pcd)
++		DWC_FREE(pcd);
++	return NULL;
++
++}
++
++/**
++ * Remove PCD specific data
++ */
++void dwc_otg_pcd_remove(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
++	int i;
++	if (pcd->core_if->core_params->dev_out_nak) {
++		for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++			DWC_TIMER_CANCEL(pcd->core_if->ep_xfer_timer[i]);
++			pcd->core_if->ep_xfer_info[i].state = 0;
++		}
++	}
++
++	if (GET_CORE_IF(pcd)->dma_enable) {
++		DWC_DMA_FREE(sizeof(*pcd->setup_pkt) * 5, pcd->setup_pkt,
++			     pcd->setup_pkt_dma_handle);
++		DWC_DMA_FREE(sizeof(uint16_t), pcd->status_buf,
++			     pcd->status_buf_dma_handle);
++		if (GET_CORE_IF(pcd)->dma_desc_enable) {
++			dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[0],
++						   dev_if->dma_setup_desc_addr
++						   [0], 1);
++			dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[1],
++						   dev_if->dma_setup_desc_addr
++						   [1], 1);
++			dwc_otg_ep_free_desc_chain(dev_if->in_desc_addr,
++						   dev_if->dma_in_desc_addr, 1);
++			dwc_otg_ep_free_desc_chain(dev_if->out_desc_addr,
++						   dev_if->dma_out_desc_addr,
++						   1);
++		}
++	} else {
++		DWC_FREE(pcd->setup_pkt);
++		DWC_FREE(pcd->status_buf);
++	}
++	DWC_SPINLOCK_FREE(pcd->lock);
++	/* Set core_if's lock pointer to NULL */
++	pcd->core_if->lock = NULL;
++
++	DWC_TASK_FREE(pcd->start_xfer_tasklet);
++	DWC_TASK_FREE(pcd->test_mode_tasklet);
++	if (pcd->core_if->core_params->dev_out_nak) {
++		for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++			if (pcd->core_if->ep_xfer_timer[i]) {
++					DWC_TIMER_FREE(pcd->core_if->ep_xfer_timer[i]);
++			}
++		}
++	}
++
++/* Release the CFI object's dynamic memory */
++#ifdef DWC_UTE_CFI
++	if (pcd->cfi->ops.release) {
++		pcd->cfi->ops.release(pcd->cfi);
++	}
++#endif
++
++	DWC_FREE(pcd);
++}
++
++/**
++ * Returns whether registered pcd is dual speed or not
++ */
++uint32_t dwc_otg_pcd_is_dualspeed(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++
++	if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) ||
++	    ((core_if->hwcfg2.b.hs_phy_type == 2) &&
++	     (core_if->hwcfg2.b.fs_phy_type == 1) &&
++	     (core_if->core_params->ulpi_fs_ls))) {
++		return 0;
++	}
++
++	return 1;
++}
++
++/**
++ * Returns whether registered pcd is OTG capable or not
++ */
++uint32_t dwc_otg_pcd_is_otg(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	gusbcfg_data_t usbcfg = {.d32 = 0 };
++
++	usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++	if (!usbcfg.b.srpcap || !usbcfg.b.hnpcap) {
++		return 0;
++	}
++
++	return 1;
++}
++
++/**
++ * This function assigns periodic Tx FIFO to an periodic EP
++ * in shared Tx FIFO mode
++ */
++static uint32_t assign_tx_fifo(dwc_otg_core_if_t * core_if)
++{
++	uint32_t TxMsk = 1;
++	int i;
++
++	for (i = 0; i < core_if->hwcfg4.b.num_in_eps; ++i) {
++		if ((TxMsk & core_if->tx_msk) == 0) {
++			core_if->tx_msk |= TxMsk;
++			return i + 1;
++		}
++		TxMsk <<= 1;
++	}
++	return 0;
++}
++
++/**
++ * This function assigns periodic Tx FIFO to an periodic EP
++ * in shared Tx FIFO mode
++ */
++static uint32_t assign_perio_tx_fifo(dwc_otg_core_if_t * core_if)
++{
++	uint32_t PerTxMsk = 1;
++	int i;
++	for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; ++i) {
++		if ((PerTxMsk & core_if->p_tx_msk) == 0) {
++			core_if->p_tx_msk |= PerTxMsk;
++			return i + 1;
++		}
++		PerTxMsk <<= 1;
++	}
++	return 0;
++}
++
++/**
++ * This function releases periodic Tx FIFO
++ * in shared Tx FIFO mode
++ */
++static void release_perio_tx_fifo(dwc_otg_core_if_t * core_if,
++				  uint32_t fifo_num)
++{
++	core_if->p_tx_msk =
++	    (core_if->p_tx_msk & (1 << (fifo_num - 1))) ^ core_if->p_tx_msk;
++}
++
++/**
++ * This function releases periodic Tx FIFO
++ * in shared Tx FIFO mode
++ */
++static void release_tx_fifo(dwc_otg_core_if_t * core_if, uint32_t fifo_num)
++{
++	core_if->tx_msk =
++	    (core_if->tx_msk & (1 << (fifo_num - 1))) ^ core_if->tx_msk;
++}
++
++/**
++ * This function is being called from gadget
++ * to enable PCD endpoint.
++ */
++int dwc_otg_pcd_ep_enable(dwc_otg_pcd_t * pcd,
++			  const uint8_t * ep_desc, void *usb_ep)
++{
++	int num, dir;
++	dwc_otg_pcd_ep_t *ep = NULL;
++	const usb_endpoint_descriptor_t *desc;
++	dwc_irqflags_t flags;
++	fifosize_data_t dptxfsiz = {.d32 = 0 };
++	gdfifocfg_data_t gdfifocfg = {.d32 = 0 };
++	gdfifocfg_data_t gdfifocfgbase = {.d32 = 0 };
++	int retval = 0;
++	int i, epcount;
++
++	desc = (const usb_endpoint_descriptor_t *)ep_desc;
++
++	if (!desc) {
++		pcd->ep0.priv = usb_ep;
++		ep = &pcd->ep0;
++		retval = -DWC_E_INVALID;
++		goto out;
++	}
++
++	num = UE_GET_ADDR(desc->bEndpointAddress);
++	dir = UE_GET_DIR(desc->bEndpointAddress);
++
++	if (!desc->wMaxPacketSize) {
++		DWC_WARN("bad maxpacketsize\n");
++		retval = -DWC_E_INVALID;
++		goto out;
++	}
++
++	if (dir == UE_DIR_IN) {
++		epcount = pcd->core_if->dev_if->num_in_eps;
++		for (i = 0; i < epcount; i++) {
++			if (num == pcd->in_ep[i].dwc_ep.num) {
++				ep = &pcd->in_ep[i];
++				break;
++			}
++		}
++	} else {
++		epcount = pcd->core_if->dev_if->num_out_eps;
++		for (i = 0; i < epcount; i++) {
++			if (num == pcd->out_ep[i].dwc_ep.num) {
++				ep = &pcd->out_ep[i];
++				break;
++			}
++		}
++	}
++
++	if (!ep) {
++		DWC_WARN("bad address\n");
++		retval = -DWC_E_INVALID;
++		goto out;
++	}
++
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++
++	ep->desc = desc;
++	ep->priv = usb_ep;
++
++	/*
++	 * Activate the EP
++	 */
++	ep->stopped = 0;
++
++	ep->dwc_ep.is_in = (dir == UE_DIR_IN);
++	ep->dwc_ep.maxpacket = UGETW(desc->wMaxPacketSize);
++
++	ep->dwc_ep.type = desc->bmAttributes & UE_XFERTYPE;
++
++	if (ep->dwc_ep.is_in) {
++		if (!GET_CORE_IF(pcd)->en_multiple_tx_fifo) {
++			ep->dwc_ep.tx_fifo_num = 0;
++
++			if (ep->dwc_ep.type == UE_ISOCHRONOUS) {
++				/*
++				 * if ISOC EP then assign a Periodic Tx FIFO.
++				 */
++				ep->dwc_ep.tx_fifo_num =
++				    assign_perio_tx_fifo(GET_CORE_IF(pcd));
++			}
++		} else {
++			/*
++			 * if Dedicated FIFOs mode is on then assign a Tx FIFO.
++			 */
++			ep->dwc_ep.tx_fifo_num =
++			    assign_tx_fifo(GET_CORE_IF(pcd));
++		}
++
++		/* Calculating EP info controller base address */
++		if (ep->dwc_ep.tx_fifo_num
++		    && GET_CORE_IF(pcd)->en_multiple_tx_fifo) {
++			gdfifocfg.d32 =
++			    DWC_READ_REG32(&GET_CORE_IF(pcd)->
++					   core_global_regs->gdfifocfg);
++			gdfifocfgbase.d32 = gdfifocfg.d32 >> 16;
++			dptxfsiz.d32 =
++			    (DWC_READ_REG32
++			     (&GET_CORE_IF(pcd)->core_global_regs->
++			      dtxfsiz[ep->dwc_ep.tx_fifo_num - 1]) >> 16);
++			gdfifocfg.b.epinfobase =
++			    gdfifocfgbase.d32 + dptxfsiz.d32;
++			if (GET_CORE_IF(pcd)->snpsid <= OTG_CORE_REV_2_94a) {
++				DWC_WRITE_REG32(&GET_CORE_IF(pcd)->
++						core_global_regs->gdfifocfg,
++						gdfifocfg.d32);
++			}
++		}
++	}
++	/* Set initial data PID. */
++	if (ep->dwc_ep.type == UE_BULK) {
++		ep->dwc_ep.data_pid_start = 0;
++	}
++
++	/* Alloc DMA Descriptors */
++	if (GET_CORE_IF(pcd)->dma_desc_enable) {
++#ifndef DWC_UTE_PER_IO
++		if (ep->dwc_ep.type != UE_ISOCHRONOUS) {
++#endif
++			ep->dwc_ep.desc_addr =
++			    dwc_otg_ep_alloc_desc_chain(&ep->
++							dwc_ep.dma_desc_addr,
++							MAX_DMA_DESC_CNT);
++			if (!ep->dwc_ep.desc_addr) {
++				DWC_WARN("%s, can't allocate DMA descriptor\n",
++					 __func__);
++				retval = -DWC_E_SHUTDOWN;
++				DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++				goto out;
++			}
++#ifndef DWC_UTE_PER_IO
++		}
++#endif
++	}
++
++	DWC_DEBUGPL(DBG_PCD, "Activate %s: type=%d, mps=%d desc=%p\n",
++		    (ep->dwc_ep.is_in ? "IN" : "OUT"),
++		    ep->dwc_ep.type, ep->dwc_ep.maxpacket, ep->desc);
++#ifdef DWC_UTE_PER_IO
++	ep->dwc_ep.xiso_bInterval = 1 << (ep->desc->bInterval - 1);
++#endif
++	if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
++		ep->dwc_ep.bInterval = 1 << (ep->desc->bInterval - 1);
++		ep->dwc_ep.frame_num = 0xFFFFFFFF;
++	}
++
++	dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep);
++
++#ifdef DWC_UTE_CFI
++	if (pcd->cfi->ops.ep_enable) {
++		pcd->cfi->ops.ep_enable(pcd->cfi, pcd, ep);
++	}
++#endif
++
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++
++out:
++	return retval;
++}
++
++/**
++ * This function is being called from gadget
++ * to disable PCD endpoint.
++ */
++int dwc_otg_pcd_ep_disable(dwc_otg_pcd_t * pcd, void *ep_handle)
++{
++	dwc_otg_pcd_ep_t *ep;
++	dwc_irqflags_t flags;
++	dwc_otg_dev_dma_desc_t *desc_addr;
++	dwc_dma_t dma_desc_addr;
++	gdfifocfg_data_t gdfifocfgbase = {.d32 = 0 };
++	gdfifocfg_data_t gdfifocfg = {.d32 = 0 };
++	fifosize_data_t dptxfsiz = {.d32 = 0 };
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++
++	if (!ep || !ep->desc) {
++		DWC_DEBUGPL(DBG_PCD, "bad ep address\n");
++		return -DWC_E_INVALID;
++	}
++
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++
++	dwc_otg_request_nuke(ep);
++
++	dwc_otg_ep_deactivate(GET_CORE_IF(pcd), &ep->dwc_ep);
++	if (pcd->core_if->core_params->dev_out_nak) {
++		DWC_TIMER_CANCEL(pcd->core_if->ep_xfer_timer[ep->dwc_ep.num]);
++		pcd->core_if->ep_xfer_info[ep->dwc_ep.num].state = 0;
++	}
++	ep->desc = NULL;
++	ep->stopped = 1;
++
++	gdfifocfg.d32 =
++	    DWC_READ_REG32(&GET_CORE_IF(pcd)->core_global_regs->gdfifocfg);
++	gdfifocfgbase.d32 = gdfifocfg.d32 >> 16;
++
++	if (ep->dwc_ep.is_in) {
++		if (GET_CORE_IF(pcd)->en_multiple_tx_fifo) {
++			/* Flush the Tx FIFO */
++			dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd),
++					      ep->dwc_ep.tx_fifo_num);
++		}
++		release_perio_tx_fifo(GET_CORE_IF(pcd), ep->dwc_ep.tx_fifo_num);
++		release_tx_fifo(GET_CORE_IF(pcd), ep->dwc_ep.tx_fifo_num);
++		if (GET_CORE_IF(pcd)->en_multiple_tx_fifo) {
++			/* Decreasing EPinfo Base Addr */
++			dptxfsiz.d32 =
++			    (DWC_READ_REG32
++			     (&GET_CORE_IF(pcd)->
++				core_global_regs->dtxfsiz[ep->dwc_ep.tx_fifo_num-1]) >> 16);
++			gdfifocfg.b.epinfobase = gdfifocfgbase.d32 - dptxfsiz.d32;
++			if (GET_CORE_IF(pcd)->snpsid <= OTG_CORE_REV_2_94a) {
++				DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gdfifocfg,
++					gdfifocfg.d32);
++			}
++		}
++	}
++
++	/* Free DMA Descriptors */
++	if (GET_CORE_IF(pcd)->dma_desc_enable) {
++		if (ep->dwc_ep.type != UE_ISOCHRONOUS) {
++			desc_addr = ep->dwc_ep.desc_addr;
++			dma_desc_addr = ep->dwc_ep.dma_desc_addr;
++
++			/* Cannot call dma_free_coherent() with IRQs disabled */
++			DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++			dwc_otg_ep_free_desc_chain(desc_addr, dma_desc_addr,
++						   MAX_DMA_DESC_CNT);
++
++			goto out_unlocked;
++		}
++	}
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++
++out_unlocked:
++	DWC_DEBUGPL(DBG_PCD, "%d %s disabled\n", ep->dwc_ep.num,
++		    ep->dwc_ep.is_in ? "IN" : "OUT");
++	return 0;
++
++}
++
++/******************************************************************************/
++#ifdef DWC_UTE_PER_IO
++
++/**
++ * Free the request and its extended parts
++ *
++ */
++void dwc_pcd_xiso_ereq_free(dwc_otg_pcd_ep_t * ep, dwc_otg_pcd_request_t * req)
++{
++	DWC_FREE(req->ext_req.per_io_frame_descs);
++	DWC_FREE(req);
++}
++
++/**
++ * Start the next request in the endpoint's queue.
++ *
++ */
++int dwc_otg_pcd_xiso_start_next_request(dwc_otg_pcd_t * pcd,
++					dwc_otg_pcd_ep_t * ep)
++{
++	int i;
++	dwc_otg_pcd_request_t *req = NULL;
++	dwc_ep_t *dwcep = NULL;
++	struct dwc_iso_xreq_port *ereq = NULL;
++	struct dwc_iso_pkt_desc_port *ddesc_iso;
++	uint16_t nat;
++	depctl_data_t diepctl;
++
++	dwcep = &ep->dwc_ep;
++
++	if (dwcep->xiso_active_xfers > 0) {
++#if 0	//Disable this to decrease s/w overhead that is crucial for Isoc transfers
++		DWC_WARN("There are currently active transfers for EP%d \
++				(active=%d; queued=%d)", dwcep->num, dwcep->xiso_active_xfers,
++				dwcep->xiso_queued_xfers);
++#endif
++		return 0;
++	}
++
++	nat = UGETW(ep->desc->wMaxPacketSize);
++	nat = (nat >> 11) & 0x03;
++
++	if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++		req = DWC_CIRCLEQ_FIRST(&ep->queue);
++		ereq = &req->ext_req;
++		ep->stopped = 0;
++
++		/* Get the frame number */
++		dwcep->xiso_frame_num =
++		    dwc_otg_get_frame_number(GET_CORE_IF(pcd));
++		DWC_DEBUG("FRM_NUM=%d", dwcep->xiso_frame_num);
++
++		ddesc_iso = ereq->per_io_frame_descs;
++
++		if (dwcep->is_in) {
++			/* Setup DMA Descriptor chain for IN Isoc request */
++			for (i = 0; i < ereq->pio_pkt_count; i++) {
++				//if ((i % (nat + 1)) == 0)
++				if ( i > 0 )
++					dwcep->xiso_frame_num =
++					    (dwcep->xiso_bInterval +
++										dwcep->xiso_frame_num) & 0x3FFF;
++				dwcep->desc_addr[i].buf =
++				    req->dma + ddesc_iso[i].offset;
++				dwcep->desc_addr[i].status.b_iso_in.txbytes =
++				    ddesc_iso[i].length;
++				dwcep->desc_addr[i].status.b_iso_in.framenum =
++				    dwcep->xiso_frame_num;
++				dwcep->desc_addr[i].status.b_iso_in.bs =
++				    BS_HOST_READY;
++				dwcep->desc_addr[i].status.b_iso_in.txsts = 0;
++				dwcep->desc_addr[i].status.b_iso_in.sp =
++				    (ddesc_iso[i].length %
++				     dwcep->maxpacket) ? 1 : 0;
++				dwcep->desc_addr[i].status.b_iso_in.ioc = 0;
++				dwcep->desc_addr[i].status.b_iso_in.pid = nat + 1;
++				dwcep->desc_addr[i].status.b_iso_in.l = 0;
++
++				/* Process the last descriptor */
++				if (i == ereq->pio_pkt_count - 1) {
++					dwcep->desc_addr[i].status.b_iso_in.ioc = 1;
++					dwcep->desc_addr[i].status.b_iso_in.l = 1;
++				}
++			}
++
++			/* Setup and start the transfer for this endpoint */
++			dwcep->xiso_active_xfers++;
++			DWC_WRITE_REG32(&GET_CORE_IF(pcd)->dev_if->
++					in_ep_regs[dwcep->num]->diepdma,
++					dwcep->dma_desc_addr);
++			diepctl.d32 = 0;
++			diepctl.b.epena = 1;
++			diepctl.b.cnak = 1;
++			DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->dev_if->
++					 in_ep_regs[dwcep->num]->diepctl, 0,
++					 diepctl.d32);
++		} else {
++			/* Setup DMA Descriptor chain for OUT Isoc request */
++			for (i = 0; i < ereq->pio_pkt_count; i++) {
++				//if ((i % (nat + 1)) == 0)
++				dwcep->xiso_frame_num = (dwcep->xiso_bInterval +
++										dwcep->xiso_frame_num) & 0x3FFF;
++				dwcep->desc_addr[i].buf =
++				    req->dma + ddesc_iso[i].offset;
++				dwcep->desc_addr[i].status.b_iso_out.rxbytes =
++				    ddesc_iso[i].length;
++				dwcep->desc_addr[i].status.b_iso_out.framenum =
++				    dwcep->xiso_frame_num;
++				dwcep->desc_addr[i].status.b_iso_out.bs =
++				    BS_HOST_READY;
++				dwcep->desc_addr[i].status.b_iso_out.rxsts = 0;
++				dwcep->desc_addr[i].status.b_iso_out.sp =
++				    (ddesc_iso[i].length %
++				     dwcep->maxpacket) ? 1 : 0;
++				dwcep->desc_addr[i].status.b_iso_out.ioc = 0;
++				dwcep->desc_addr[i].status.b_iso_out.pid = nat + 1;
++				dwcep->desc_addr[i].status.b_iso_out.l = 0;
++
++				/* Process the last descriptor */
++				if (i == ereq->pio_pkt_count - 1) {
++					dwcep->desc_addr[i].status.b_iso_out.ioc = 1;
++					dwcep->desc_addr[i].status.b_iso_out.l = 1;
++				}
++			}
++
++			/* Setup and start the transfer for this endpoint */
++			dwcep->xiso_active_xfers++;
++			DWC_WRITE_REG32(&GET_CORE_IF(pcd)->
++					dev_if->out_ep_regs[dwcep->num]->
++					doepdma, dwcep->dma_desc_addr);
++			diepctl.d32 = 0;
++			diepctl.b.epena = 1;
++			diepctl.b.cnak = 1;
++			DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->
++					 dev_if->out_ep_regs[dwcep->num]->
++					 doepctl, 0, diepctl.d32);
++		}
++
++	} else {
++		ep->stopped = 1;
++	}
++
++	return 0;
++}
++
++/**
++ *	- Remove the request from the queue
++ */
++void complete_xiso_ep(dwc_otg_pcd_ep_t * ep)
++{
++	dwc_otg_pcd_request_t *req = NULL;
++	struct dwc_iso_xreq_port *ereq = NULL;
++	struct dwc_iso_pkt_desc_port *ddesc_iso = NULL;
++	dwc_ep_t *dwcep = NULL;
++	int i;
++
++	//DWC_DEBUG();
++	dwcep = &ep->dwc_ep;
++
++	/* Get the first pending request from the queue */
++	if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++		req = DWC_CIRCLEQ_FIRST(&ep->queue);
++		if (!req) {
++			DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep);
++			return;
++		}
++		dwcep->xiso_active_xfers--;
++		dwcep->xiso_queued_xfers--;
++		/* Remove this request from the queue */
++		DWC_CIRCLEQ_REMOVE_INIT(&ep->queue, req, queue_entry);
++	} else {
++		DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep);
++		return;
++	}
++
++	ep->stopped = 1;
++	ereq = &req->ext_req;
++	ddesc_iso = ereq->per_io_frame_descs;
++
++	if (dwcep->xiso_active_xfers < 0) {
++		DWC_WARN("EP#%d (xiso_active_xfers=%d)", dwcep->num,
++			 dwcep->xiso_active_xfers);
++	}
++
++	/* Fill the Isoc descs of portable extended req from dma descriptors */
++	for (i = 0; i < ereq->pio_pkt_count; i++) {
++		if (dwcep->is_in) {	/* IN endpoints */
++			ddesc_iso[i].actual_length = ddesc_iso[i].length -
++			    dwcep->desc_addr[i].status.b_iso_in.txbytes;
++			ddesc_iso[i].status =
++			    dwcep->desc_addr[i].status.b_iso_in.txsts;
++		} else {	/* OUT endpoints */
++			ddesc_iso[i].actual_length = ddesc_iso[i].length -
++			    dwcep->desc_addr[i].status.b_iso_out.rxbytes;
++			ddesc_iso[i].status =
++			    dwcep->desc_addr[i].status.b_iso_out.rxsts;
++		}
++	}
++
++	DWC_SPINUNLOCK(ep->pcd->lock);
++
++	/* Call the completion function in the non-portable logic */
++	ep->pcd->fops->xisoc_complete(ep->pcd, ep->priv, req->priv, 0,
++				      &req->ext_req);
++
++	DWC_SPINLOCK(ep->pcd->lock);
++
++	/* Free the request - specific freeing needed for extended request object */
++	dwc_pcd_xiso_ereq_free(ep, req);
++
++	/* Start the next request */
++	dwc_otg_pcd_xiso_start_next_request(ep->pcd, ep);
++
++	return;
++}
++
++/**
++ * Create and initialize the Isoc pkt descriptors of the extended request.
++ *
++ */
++static int dwc_otg_pcd_xiso_create_pkt_descs(dwc_otg_pcd_request_t * req,
++					     void *ereq_nonport,
++					     int atomic_alloc)
++{
++	struct dwc_iso_xreq_port *ereq = NULL;
++	struct dwc_iso_xreq_port *req_mapped = NULL;
++	struct dwc_iso_pkt_desc_port *ipds = NULL;	/* To be created in this function */
++	uint32_t pkt_count;
++	int i;
++
++	ereq = &req->ext_req;
++	req_mapped = (struct dwc_iso_xreq_port *)ereq_nonport;
++	pkt_count = req_mapped->pio_pkt_count;
++
++	/* Create the isoc descs */
++	if (atomic_alloc) {
++		ipds = DWC_ALLOC_ATOMIC(sizeof(*ipds) * pkt_count);
++	} else {
++		ipds = DWC_ALLOC(sizeof(*ipds) * pkt_count);
++	}
++
++	if (!ipds) {
++		DWC_ERROR("Failed to allocate isoc descriptors");
++		return -DWC_E_NO_MEMORY;
++	}
++
++	/* Initialize the extended request fields */
++	ereq->per_io_frame_descs = ipds;
++	ereq->error_count = 0;
++	ereq->pio_alloc_pkt_count = pkt_count;
++	ereq->pio_pkt_count = pkt_count;
++	ereq->tr_sub_flags = req_mapped->tr_sub_flags;
++
++	/* Init the Isoc descriptors */
++	for (i = 0; i < pkt_count; i++) {
++		ipds[i].length = req_mapped->per_io_frame_descs[i].length;
++		ipds[i].offset = req_mapped->per_io_frame_descs[i].offset;
++		ipds[i].status = req_mapped->per_io_frame_descs[i].status;	/* 0 */
++		ipds[i].actual_length =
++		    req_mapped->per_io_frame_descs[i].actual_length;
++	}
++
++	return 0;
++}
++
++static void prn_ext_request(struct dwc_iso_xreq_port *ereq)
++{
++	struct dwc_iso_pkt_desc_port *xfd = NULL;
++	int i;
++
++	DWC_DEBUG("per_io_frame_descs=%p", ereq->per_io_frame_descs);
++	DWC_DEBUG("tr_sub_flags=%d", ereq->tr_sub_flags);
++	DWC_DEBUG("error_count=%d", ereq->error_count);
++	DWC_DEBUG("pio_alloc_pkt_count=%d", ereq->pio_alloc_pkt_count);
++	DWC_DEBUG("pio_pkt_count=%d", ereq->pio_pkt_count);
++	DWC_DEBUG("res=%d", ereq->res);
++
++	for (i = 0; i < ereq->pio_pkt_count; i++) {
++		xfd = &ereq->per_io_frame_descs[0];
++		DWC_DEBUG("FD #%d", i);
++
++		DWC_DEBUG("xfd->actual_length=%d", xfd->actual_length);
++		DWC_DEBUG("xfd->length=%d", xfd->length);
++		DWC_DEBUG("xfd->offset=%d", xfd->offset);
++		DWC_DEBUG("xfd->status=%d", xfd->status);
++	}
++}
++
++/**
++ *
++ */
++int dwc_otg_pcd_xiso_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle,
++			      uint8_t * buf, dwc_dma_t dma_buf, uint32_t buflen,
++			      int zero, void *req_handle, int atomic_alloc,
++			      void *ereq_nonport)
++{
++	dwc_otg_pcd_request_t *req = NULL;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_irqflags_t flags;
++	int res;
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++	if (!ep) {
++		DWC_WARN("bad ep\n");
++		return -DWC_E_INVALID;
++	}
++
++	/* We support this extension only for DDMA mode */
++	if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC)
++		if (!GET_CORE_IF(pcd)->dma_desc_enable)
++			return -DWC_E_INVALID;
++
++	/* Create a dwc_otg_pcd_request_t object */
++	if (atomic_alloc) {
++		req = DWC_ALLOC_ATOMIC(sizeof(*req));
++	} else {
++		req = DWC_ALLOC(sizeof(*req));
++	}
++
++	if (!req) {
++		return -DWC_E_NO_MEMORY;
++	}
++
++	/* Create the Isoc descs for this request which shall be the exact match
++	 * of the structure sent to us from the non-portable logic */
++	res =
++	    dwc_otg_pcd_xiso_create_pkt_descs(req, ereq_nonport, atomic_alloc);
++	if (res) {
++		DWC_WARN("Failed to init the Isoc descriptors");
++		DWC_FREE(req);
++		return res;
++	}
++
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++
++	DWC_CIRCLEQ_INIT_ENTRY(req, queue_entry);
++	req->buf = buf;
++	req->dma = dma_buf;
++	req->length = buflen;
++	req->sent_zlp = zero;
++	req->priv = req_handle;
++
++	//DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++	ep->dwc_ep.dma_addr = dma_buf;
++	ep->dwc_ep.start_xfer_buff = buf;
++	ep->dwc_ep.xfer_buff = buf;
++	ep->dwc_ep.xfer_len = 0;
++	ep->dwc_ep.xfer_count = 0;
++	ep->dwc_ep.sent_zlp = 0;
++	ep->dwc_ep.total_len = buflen;
++
++	/* Add this request to the tail */
++	DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry);
++	ep->dwc_ep.xiso_queued_xfers++;
++
++//DWC_DEBUG("CP_0");
++//DWC_DEBUG("req->ext_req.tr_sub_flags=%d", req->ext_req.tr_sub_flags);
++//prn_ext_request((struct dwc_iso_xreq_port *) ereq_nonport);
++//prn_ext_request(&req->ext_req);
++
++	//DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++
++	/* If the req->status == ASAP  then check if there is any active transfer
++	 * for this endpoint. If no active transfers, then get the first entry
++	 * from the queue and start that transfer
++	 */
++	if (req->ext_req.tr_sub_flags == DWC_EREQ_TF_ASAP) {
++		res = dwc_otg_pcd_xiso_start_next_request(pcd, ep);
++		if (res) {
++			DWC_WARN("Failed to start the next Isoc transfer");
++			DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++			DWC_FREE(req);
++			return res;
++		}
++	}
++
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++	return 0;
++}
++
++#endif
++/* END ifdef DWC_UTE_PER_IO ***************************************************/
++int dwc_otg_pcd_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle,
++			 uint8_t * buf, dwc_dma_t dma_buf, uint32_t buflen,
++			 int zero, void *req_handle, int atomic_alloc)
++{
++	dwc_irqflags_t flags;
++	dwc_otg_pcd_request_t *req;
++	dwc_otg_pcd_ep_t *ep;
++	uint32_t max_transfer;
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++	if (!ep || (!ep->desc && ep->dwc_ep.num != 0)) {
++		DWC_WARN("bad ep\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (atomic_alloc) {
++		req = DWC_ALLOC_ATOMIC(sizeof(*req));
++	} else {
++		req = DWC_ALLOC(sizeof(*req));
++	}
++
++	if (!req) {
++		return -DWC_E_NO_MEMORY;
++	}
++	DWC_CIRCLEQ_INIT_ENTRY(req, queue_entry);
++	if (!GET_CORE_IF(pcd)->core_params->opt) {
++		if (ep->dwc_ep.num != 0) {
++			DWC_ERROR("queue req %p, len %d buf %p\n",
++				  req_handle, buflen, buf);
++		}
++	}
++
++	req->buf = buf;
++	req->dma = dma_buf;
++	req->length = buflen;
++	req->sent_zlp = zero;
++	req->priv = req_handle;
++	req->dw_align_buf = NULL;
++	if ((dma_buf & 0x3) && GET_CORE_IF(pcd)->dma_enable
++			&& !GET_CORE_IF(pcd)->dma_desc_enable)
++		req->dw_align_buf = DWC_DMA_ALLOC(buflen,
++				 &req->dw_align_buf_dma);
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++
++	/*
++	 * After adding request to the queue for IN ISOC wait for In Token Received
++	 * when TX FIFO is empty interrupt and for OUT ISOC wait for OUT Token
++	 * Received when EP is disabled interrupt to obtain starting microframe
++	 * (odd/even) start transfer
++	 */
++	if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
++		if (req != 0) {
++			depctl_data_t depctl = {.d32 =
++				    DWC_READ_REG32(&pcd->core_if->dev_if->
++						   in_ep_regs[ep->dwc_ep.num]->
++						   diepctl) };
++			++pcd->request_pending;
++
++			DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry);
++			if (ep->dwc_ep.is_in) {
++				depctl.b.cnak = 1;
++				DWC_WRITE_REG32(&pcd->core_if->dev_if->
++						in_ep_regs[ep->dwc_ep.num]->
++						diepctl, depctl.d32);
++			}
++
++			DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++		}
++		return 0;
++	}
++
++	/*
++	 * For EP0 IN without premature status, zlp is required?
++	 */
++	if (ep->dwc_ep.num == 0 && ep->dwc_ep.is_in) {
++		DWC_DEBUGPL(DBG_PCDV, "%d-OUT ZLP\n", ep->dwc_ep.num);
++		//_req->zero = 1;
++	}
++
++	/* Start the transfer */
++	if (DWC_CIRCLEQ_EMPTY(&ep->queue) && !ep->stopped) {
++		/* EP0 Transfer? */
++		if (ep->dwc_ep.num == 0) {
++			switch (pcd->ep0state) {
++			case EP0_IN_DATA_PHASE:
++				DWC_DEBUGPL(DBG_PCD,
++					    "%s ep0: EP0_IN_DATA_PHASE\n",
++					    __func__);
++				break;
++
++			case EP0_OUT_DATA_PHASE:
++				DWC_DEBUGPL(DBG_PCD,
++					    "%s ep0: EP0_OUT_DATA_PHASE\n",
++					    __func__);
++				if (pcd->request_config) {
++					/* Complete STATUS PHASE */
++					ep->dwc_ep.is_in = 1;
++					pcd->ep0state = EP0_IN_STATUS_PHASE;
++				}
++				break;
++
++			case EP0_IN_STATUS_PHASE:
++				DWC_DEBUGPL(DBG_PCD,
++					    "%s ep0: EP0_IN_STATUS_PHASE\n",
++					    __func__);
++				break;
++
++			default:
++				DWC_DEBUGPL(DBG_ANY, "ep0: odd state %d\n",
++					    pcd->ep0state);
++				DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++				return -DWC_E_SHUTDOWN;
++			}
++
++			ep->dwc_ep.dma_addr = dma_buf;
++			ep->dwc_ep.start_xfer_buff = buf;
++			ep->dwc_ep.xfer_buff = buf;
++			ep->dwc_ep.xfer_len = buflen;
++			ep->dwc_ep.xfer_count = 0;
++			ep->dwc_ep.sent_zlp = 0;
++			ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
++
++			if (zero) {
++				if ((ep->dwc_ep.xfer_len %
++				     ep->dwc_ep.maxpacket == 0)
++				    && (ep->dwc_ep.xfer_len != 0)) {
++					ep->dwc_ep.sent_zlp = 1;
++				}
++
++			}
++
++			dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd),
++						   &ep->dwc_ep);
++		}		// non-ep0 endpoints
++		else {
++#ifdef DWC_UTE_CFI
++			if (ep->dwc_ep.buff_mode != BM_STANDARD) {
++				/* store the request length */
++				ep->dwc_ep.cfi_req_len = buflen;
++				pcd->cfi->ops.build_descriptors(pcd->cfi, pcd,
++								ep, req);
++			} else {
++#endif
++				max_transfer =
++				    GET_CORE_IF(ep->pcd)->core_params->
++				    max_transfer_size;
++
++				/* Setup and start the Transfer */
++				if (req->dw_align_buf){
++					if (ep->dwc_ep.is_in)
++						dwc_memcpy(req->dw_align_buf,
++							   buf, buflen);
++					ep->dwc_ep.dma_addr =
++					    req->dw_align_buf_dma;
++					ep->dwc_ep.start_xfer_buff =
++					    req->dw_align_buf;
++					ep->dwc_ep.xfer_buff =
++					    req->dw_align_buf;
++				} else {
++					ep->dwc_ep.dma_addr = dma_buf;
++					ep->dwc_ep.start_xfer_buff = buf;
++                                        ep->dwc_ep.xfer_buff = buf;
++				}
++				ep->dwc_ep.xfer_len = 0;
++				ep->dwc_ep.xfer_count = 0;
++				ep->dwc_ep.sent_zlp = 0;
++				ep->dwc_ep.total_len = buflen;
++
++				ep->dwc_ep.maxxfer = max_transfer;
++				if (GET_CORE_IF(pcd)->dma_desc_enable) {
++					uint32_t out_max_xfer =
++					    DDMA_MAX_TRANSFER_SIZE -
++					    (DDMA_MAX_TRANSFER_SIZE % 4);
++					if (ep->dwc_ep.is_in) {
++						if (ep->dwc_ep.maxxfer >
++						    DDMA_MAX_TRANSFER_SIZE) {
++							ep->dwc_ep.maxxfer =
++							    DDMA_MAX_TRANSFER_SIZE;
++						}
++					} else {
++						if (ep->dwc_ep.maxxfer >
++						    out_max_xfer) {
++							ep->dwc_ep.maxxfer =
++							    out_max_xfer;
++						}
++					}
++				}
++				if (ep->dwc_ep.maxxfer < ep->dwc_ep.total_len) {
++					ep->dwc_ep.maxxfer -=
++					    (ep->dwc_ep.maxxfer %
++					     ep->dwc_ep.maxpacket);
++				}
++
++				if (zero) {
++					if ((ep->dwc_ep.total_len %
++					     ep->dwc_ep.maxpacket == 0)
++					    && (ep->dwc_ep.total_len != 0)) {
++						ep->dwc_ep.sent_zlp = 1;
++					}
++				}
++#ifdef DWC_UTE_CFI
++			}
++#endif
++			dwc_otg_ep_start_transfer(GET_CORE_IF(pcd),
++						  &ep->dwc_ep);
++		}
++	}
++
++	if (req != 0) {
++		++pcd->request_pending;
++		DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry);
++		if (ep->dwc_ep.is_in && ep->stopped
++		    && !(GET_CORE_IF(pcd)->dma_enable)) {
++			/** @todo NGS Create a function for this. */
++			diepmsk_data_t diepmsk = {.d32 = 0 };
++			diepmsk.b.intktxfemp = 1;
++			if (GET_CORE_IF(pcd)->multiproc_int_enable) {
++				DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->
++						 dev_if->dev_global_regs->diepeachintmsk
++						 [ep->dwc_ep.num], 0,
++						 diepmsk.d32);
++			} else {
++				DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->
++						 dev_if->dev_global_regs->
++						 diepmsk, 0, diepmsk.d32);
++			}
++
++		}
++	}
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++
++	return 0;
++}
++
++int dwc_otg_pcd_ep_dequeue(dwc_otg_pcd_t * pcd, void *ep_handle,
++			   void *req_handle)
++{
++	dwc_irqflags_t flags;
++	dwc_otg_pcd_request_t *req;
++	dwc_otg_pcd_ep_t *ep;
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++	if (!ep || (!ep->desc && ep->dwc_ep.num != 0)) {
++		DWC_WARN("bad argument\n");
++		return -DWC_E_INVALID;
++	}
++
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++
++	/* make sure it's actually queued on this endpoint */
++	DWC_CIRCLEQ_FOREACH(req, &ep->queue, queue_entry) {
++		if (req->priv == (void *)req_handle) {
++			break;
++		}
++	}
++
++	if (req->priv != (void *)req_handle) {
++		DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++		return -DWC_E_INVALID;
++	}
++
++	if (!DWC_CIRCLEQ_EMPTY_ENTRY(req, queue_entry)) {
++		dwc_otg_request_done(ep, req, -DWC_E_RESTART);
++	} else {
++		req = NULL;
++	}
++
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++
++	return req ? 0 : -DWC_E_SHUTDOWN;
++
++}
++
++/**
++ * dwc_otg_pcd_ep_wedge - sets the halt feature and ignores clear requests
++ *
++ * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT)
++ * requests. If the gadget driver clears the halt status, it will
++ * automatically unwedge the endpoint.
++ *
++ * Returns zero on success, else negative DWC error code.
++ */
++int dwc_otg_pcd_ep_wedge(dwc_otg_pcd_t * pcd, void *ep_handle)
++{
++	dwc_otg_pcd_ep_t *ep;
++	dwc_irqflags_t flags;
++	int retval = 0;
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++
++	if ((!ep->desc && ep != &pcd->ep0) ||
++	    (ep->desc && (ep->desc->bmAttributes == UE_ISOCHRONOUS))) {
++		DWC_WARN("%s, bad ep\n", __func__);
++		return -DWC_E_INVALID;
++	}
++
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++	if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++		DWC_WARN("%d %s XFer In process\n", ep->dwc_ep.num,
++			 ep->dwc_ep.is_in ? "IN" : "OUT");
++		retval = -DWC_E_AGAIN;
++	} else {
++                /* This code needs to be reviewed */
++		if (ep->dwc_ep.is_in == 1 && GET_CORE_IF(pcd)->dma_desc_enable) {
++			dtxfsts_data_t txstatus;
++			fifosize_data_t txfifosize;
++
++			txfifosize.d32 =
++			    DWC_READ_REG32(&GET_CORE_IF(pcd)->
++					   core_global_regs->dtxfsiz[ep->dwc_ep.
++								     tx_fifo_num]);
++			txstatus.d32 =
++			    DWC_READ_REG32(&GET_CORE_IF(pcd)->
++					   dev_if->in_ep_regs[ep->dwc_ep.num]->
++					   dtxfsts);
++
++			if (txstatus.b.txfspcavail < txfifosize.b.depth) {
++				DWC_WARN("%s() Data In Tx Fifo\n", __func__);
++				retval = -DWC_E_AGAIN;
++			} else {
++				if (ep->dwc_ep.num == 0) {
++					pcd->ep0state = EP0_STALL;
++				}
++
++				ep->stopped = 1;
++				dwc_otg_ep_set_stall(GET_CORE_IF(pcd),
++						     &ep->dwc_ep);
++			}
++		} else {
++			if (ep->dwc_ep.num == 0) {
++				pcd->ep0state = EP0_STALL;
++			}
++
++			ep->stopped = 1;
++			dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep->dwc_ep);
++		}
++	}
++
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++
++	return retval;
++}
++
++int dwc_otg_pcd_ep_halt(dwc_otg_pcd_t * pcd, void *ep_handle, int value)
++{
++	dwc_otg_pcd_ep_t *ep;
++	dwc_irqflags_t flags;
++	int retval = 0;
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++
++	if (!ep || (!ep->desc && ep != &pcd->ep0) ||
++	    (ep->desc && (ep->desc->bmAttributes == UE_ISOCHRONOUS))) {
++		DWC_WARN("%s, bad ep\n", __func__);
++		return -DWC_E_INVALID;
++	}
++
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++	if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++		DWC_WARN("%d %s XFer In process\n", ep->dwc_ep.num,
++			 ep->dwc_ep.is_in ? "IN" : "OUT");
++		retval = -DWC_E_AGAIN;
++	} else if (value == 0) {
++		dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep);
++	} else if (value == 1) {
++		if (ep->dwc_ep.is_in == 1 && GET_CORE_IF(pcd)->dma_desc_enable) {
++			dtxfsts_data_t txstatus;
++			fifosize_data_t txfifosize;
++
++			txfifosize.d32 =
++			    DWC_READ_REG32(&GET_CORE_IF(pcd)->core_global_regs->
++					   dtxfsiz[ep->dwc_ep.tx_fifo_num]);
++			txstatus.d32 =
++			    DWC_READ_REG32(&GET_CORE_IF(pcd)->dev_if->
++					   in_ep_regs[ep->dwc_ep.num]->dtxfsts);
++
++			if (txstatus.b.txfspcavail < txfifosize.b.depth) {
++				DWC_WARN("%s() Data In Tx Fifo\n", __func__);
++				retval = -DWC_E_AGAIN;
++			} else {
++				if (ep->dwc_ep.num == 0) {
++					pcd->ep0state = EP0_STALL;
++				}
++
++				ep->stopped = 1;
++				dwc_otg_ep_set_stall(GET_CORE_IF(pcd),
++						     &ep->dwc_ep);
++			}
++		} else {
++			if (ep->dwc_ep.num == 0) {
++				pcd->ep0state = EP0_STALL;
++			}
++
++			ep->stopped = 1;
++			dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep->dwc_ep);
++		}
++	} else if (value == 2) {
++		ep->dwc_ep.stall_clear_flag = 0;
++	} else if (value == 3) {
++		ep->dwc_ep.stall_clear_flag = 1;
++	}
++
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++
++	return retval;
++}
++
++/**
++ * This function initiates remote wakeup of the host from suspend state.
++ */
++void dwc_otg_pcd_rem_wkup_from_suspend(dwc_otg_pcd_t * pcd, int set)
++{
++	dctl_data_t dctl = { 0 };
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dsts_data_t dsts;
++
++	dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
++	if (!dsts.b.suspsts) {
++		DWC_WARN("Remote wakeup while is not in suspend state\n");
++	}
++	/* Check if DEVICE_REMOTE_WAKEUP feature enabled */
++	if (pcd->remote_wakeup_enable) {
++		if (set) {
++
++			if (core_if->adp_enable) {
++				gpwrdn_data_t gpwrdn;
++
++				dwc_otg_adp_probe_stop(core_if);
++
++				/* Mask SRP detected interrupt from Power Down Logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.srp_det_msk = 1;
++				DWC_MODIFY_REG32(&core_if->
++						 core_global_regs->gpwrdn,
++						 gpwrdn.d32, 0);
++
++				/* Disable Power Down Logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pmuactv = 1;
++				DWC_MODIFY_REG32(&core_if->
++						 core_global_regs->gpwrdn,
++						 gpwrdn.d32, 0);
++
++				/*
++				 * Initialize the Core for Device mode.
++				 */
++				core_if->op_state = B_PERIPHERAL;
++				dwc_otg_core_init(core_if);
++				dwc_otg_enable_global_interrupts(core_if);
++				cil_pcd_start(core_if);
++
++				dwc_otg_initiate_srp(core_if);
++			}
++
++			dctl.b.rmtwkupsig = 1;
++			DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
++					 dctl, 0, dctl.d32);
++			DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n");
++
++			dwc_mdelay(2);
++			DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
++					 dctl, dctl.d32, 0);
++			DWC_DEBUGPL(DBG_PCD, "Clear Remote Wakeup\n");
++		}
++	} else {
++		DWC_DEBUGPL(DBG_PCD, "Remote Wakeup is disabled\n");
++	}
++}
++
++#ifdef CONFIG_USB_DWC_OTG_LPM
++/**
++ * This function initiates remote wakeup of the host from L1 sleep state.
++ */
++void dwc_otg_pcd_rem_wkup_from_sleep(dwc_otg_pcd_t * pcd, int set)
++{
++	glpmcfg_data_t lpmcfg;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++
++	/* Check if we are in L1 state */
++	if (!lpmcfg.b.prt_sleep_sts) {
++		DWC_DEBUGPL(DBG_PCD, "Device is not in sleep state\n");
++		return;
++	}
++
++	/* Check if host allows remote wakeup */
++	if (!lpmcfg.b.rem_wkup_en) {
++		DWC_DEBUGPL(DBG_PCD, "Host does not allow remote wakeup\n");
++		return;
++	}
++
++	/* Check if Resume OK */
++	if (!lpmcfg.b.sleep_state_resumeok) {
++		DWC_DEBUGPL(DBG_PCD, "Sleep state resume is not OK\n");
++		return;
++	}
++
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	lpmcfg.b.en_utmi_sleep = 0;
++	lpmcfg.b.hird_thres &= (~(1 << 4));
++	DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32);
++
++	if (set) {
++		dctl_data_t dctl = {.d32 = 0 };
++		dctl.b.rmtwkupsig = 1;
++		/* Set RmtWkUpSig bit to start remote wakup signaling.
++		 * Hardware will automatically clear this bit.
++		 */
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl,
++				 0, dctl.d32);
++		DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n");
++	}
++
++}
++#endif
++
++/**
++ * Performs remote wakeup.
++ */
++void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t * pcd, int set)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_irqflags_t flags;
++	if (dwc_otg_is_device_mode(core_if)) {
++		DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++#ifdef CONFIG_USB_DWC_OTG_LPM
++		if (core_if->lx_state == DWC_OTG_L1) {
++			dwc_otg_pcd_rem_wkup_from_sleep(pcd, set);
++		} else {
++#endif
++			dwc_otg_pcd_rem_wkup_from_suspend(pcd, set);
++#ifdef CONFIG_USB_DWC_OTG_LPM
++		}
++#endif
++		DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++	}
++	return;
++}
++
++void dwc_otg_pcd_disconnect_us(dwc_otg_pcd_t * pcd, int no_of_usecs)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dctl_data_t dctl = { 0 };
++
++	if (dwc_otg_is_device_mode(core_if)) {
++		dctl.b.sftdiscon = 1;
++		DWC_PRINTF("Soft disconnect for %d useconds\n",no_of_usecs);
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
++		dwc_udelay(no_of_usecs);
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32,0);
++
++	} else{
++		DWC_PRINTF("NOT SUPPORTED IN HOST MODE\n");
++	}
++	return;
++
++}
++
++int dwc_otg_pcd_wakeup(dwc_otg_pcd_t * pcd)
++{
++	dsts_data_t dsts;
++	gotgctl_data_t gotgctl;
++
++	/*
++	 * This function starts the Protocol if no session is in progress. If
++	 * a session is already in progress, but the device is suspended,
++	 * remote wakeup signaling is started.
++	 */
++
++	/* Check if valid session */
++	gotgctl.d32 =
++	    DWC_READ_REG32(&(GET_CORE_IF(pcd)->core_global_regs->gotgctl));
++	if (gotgctl.b.bsesvld) {
++		/* Check if suspend state */
++		dsts.d32 =
++		    DWC_READ_REG32(&
++				   (GET_CORE_IF(pcd)->dev_if->
++				    dev_global_regs->dsts));
++		if (dsts.b.suspsts) {
++			dwc_otg_pcd_remote_wakeup(pcd, 1);
++		}
++	} else {
++		dwc_otg_pcd_initiate_srp(pcd);
++	}
++
++	return 0;
++
++}
++
++/**
++ * Start the SRP timer to detect when the SRP does not complete within
++ * 6 seconds.
++ *
++ * @param pcd the pcd structure.
++ */
++void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t * pcd)
++{
++	dwc_irqflags_t flags;
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++	dwc_otg_initiate_srp(GET_CORE_IF(pcd));
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++}
++
++int dwc_otg_pcd_get_frame_number(dwc_otg_pcd_t * pcd)
++{
++	return dwc_otg_get_frame_number(GET_CORE_IF(pcd));
++}
++
++int dwc_otg_pcd_is_lpm_enabled(dwc_otg_pcd_t * pcd)
++{
++	return GET_CORE_IF(pcd)->core_params->lpm_enable;
++}
++
++uint32_t get_b_hnp_enable(dwc_otg_pcd_t * pcd)
++{
++	return pcd->b_hnp_enable;
++}
++
++uint32_t get_a_hnp_support(dwc_otg_pcd_t * pcd)
++{
++	return pcd->a_hnp_support;
++}
++
++uint32_t get_a_alt_hnp_support(dwc_otg_pcd_t * pcd)
++{
++	return pcd->a_alt_hnp_support;
++}
++
++int dwc_otg_pcd_get_rmwkup_enable(dwc_otg_pcd_t * pcd)
++{
++	return pcd->remote_wakeup_enable;
++}
++
++#endif /* DWC_HOST_ONLY */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_pcd.h linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_pcd.h
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_pcd.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_pcd.h	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,266 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.h $
++ * $Revision: #48 $
++ * $Date: 2012/08/10 $
++ * $Change: 2047372 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_HOST_ONLY
++#if !defined(__DWC_PCD_H__)
++#define __DWC_PCD_H__
++
++#include "dwc_otg_os_dep.h"
++#include "usb.h"
++#include "dwc_otg_cil.h"
++#include "dwc_otg_pcd_if.h"
++struct cfiobject;
++
++/**
++ * @file
++ *
++ * This file contains the structures, constants, and interfaces for
++ * the Perpherial Contoller Driver (PCD).
++ *
++ * The Peripheral Controller Driver (PCD) for Linux will implement the
++ * Gadget API, so that the existing Gadget drivers can be used. For
++ * the Mass Storage Function driver the File-backed USB Storage Gadget
++ * (FBS) driver will be used.  The FBS driver supports the
++ * Control-Bulk (CB), Control-Bulk-Interrupt (CBI), and Bulk-Only
++ * transports.
++ *
++ */
++
++/** Invalid DMA Address */
++#define DWC_DMA_ADDR_INVALID	(~(dwc_dma_t)0)
++
++/** Max Transfer size for any EP */
++#define DDMA_MAX_TRANSFER_SIZE 65535
++
++/**
++ * Get the pointer to the core_if from the pcd pointer.
++ */
++#define GET_CORE_IF( _pcd ) (_pcd->core_if)
++
++/**
++ * States of EP0.
++ */
++typedef enum ep0_state {
++	EP0_DISCONNECT,		/* no host */
++	EP0_IDLE,
++	EP0_IN_DATA_PHASE,
++	EP0_OUT_DATA_PHASE,
++	EP0_IN_STATUS_PHASE,
++	EP0_OUT_STATUS_PHASE,
++	EP0_STALL,
++} ep0state_e;
++
++/** Fordward declaration.*/
++struct dwc_otg_pcd;
++
++/** DWC_otg iso request structure.
++ *
++ */
++typedef struct usb_iso_request dwc_otg_pcd_iso_request_t;
++
++#ifdef DWC_UTE_PER_IO
++
++/**
++ * This shall be the exact analogy of the same type structure defined in the
++ * usb_gadget.h. Each descriptor contains
++ */
++struct dwc_iso_pkt_desc_port {
++	uint32_t offset;
++	uint32_t length;	/* expected length */
++	uint32_t actual_length;
++	uint32_t status;
++};
++
++struct dwc_iso_xreq_port {
++	/** transfer/submission flag */
++	uint32_t tr_sub_flags;
++	/** Start the request ASAP */
++#define DWC_EREQ_TF_ASAP		0x00000002
++	/** Just enqueue the request w/o initiating a transfer */
++#define DWC_EREQ_TF_ENQUEUE		0x00000004
++
++	/**
++	* count of ISO packets attached to this request - shall
++	* not exceed the pio_alloc_pkt_count
++	*/
++	uint32_t pio_pkt_count;
++	/** count of ISO packets allocated for this request */
++	uint32_t pio_alloc_pkt_count;
++	/** number of ISO packet errors */
++	uint32_t error_count;
++	/** reserved for future extension */
++	uint32_t res;
++	/** Will be allocated and freed in the UTE gadget and based on the CFC value */
++	struct dwc_iso_pkt_desc_port *per_io_frame_descs;
++};
++#endif
++/** DWC_otg request structure.
++ * This structure is a list of requests.
++ */
++typedef struct dwc_otg_pcd_request {
++	void *priv;
++	void *buf;
++	dwc_dma_t dma;
++	uint32_t length;
++	uint32_t actual;
++	unsigned sent_zlp:1;
++    /**
++     * Used instead of original buffer if
++     * it(physical address) is not dword-aligned.
++     **/
++     uint8_t *dw_align_buf;
++     dwc_dma_t dw_align_buf_dma;
++
++	 DWC_CIRCLEQ_ENTRY(dwc_otg_pcd_request) queue_entry;
++#ifdef DWC_UTE_PER_IO
++	struct dwc_iso_xreq_port ext_req;
++	//void *priv_ereq_nport; /*  */
++#endif
++} dwc_otg_pcd_request_t;
++
++DWC_CIRCLEQ_HEAD(req_list, dwc_otg_pcd_request);
++
++/**	  PCD EP structure.
++ * This structure describes an EP, there is an array of EPs in the PCD
++ * structure.
++ */
++typedef struct dwc_otg_pcd_ep {
++	/** USB EP Descriptor */
++	const usb_endpoint_descriptor_t *desc;
++
++	/** queue of dwc_otg_pcd_requests. */
++	struct req_list queue;
++	unsigned stopped:1;
++	unsigned disabling:1;
++	unsigned dma:1;
++	unsigned queue_sof:1;
++
++#ifdef DWC_EN_ISOC
++	/** ISOC req handle passed */
++	void *iso_req_handle;
++#endif				//_EN_ISOC_
++
++	/** DWC_otg ep data. */
++	dwc_ep_t dwc_ep;
++
++	/** Pointer to PCD */
++	struct dwc_otg_pcd *pcd;
++
++	void *priv;
++} dwc_otg_pcd_ep_t;
++
++/** DWC_otg PCD Structure.
++ * This structure encapsulates the data for the dwc_otg PCD.
++ */
++struct dwc_otg_pcd {
++	const struct dwc_otg_pcd_function_ops *fops;
++	/** The DWC otg device pointer */
++	struct dwc_otg_device *otg_dev;
++	/** Core Interface */
++	dwc_otg_core_if_t *core_if;
++	/** State of EP0 */
++	ep0state_e ep0state;
++	/** EP0 Request is pending */
++	unsigned ep0_pending:1;
++	/** Indicates when SET CONFIGURATION Request is in process */
++	unsigned request_config:1;
++	/** The state of the Remote Wakeup Enable. */
++	unsigned remote_wakeup_enable:1;
++	/** The state of the B-Device HNP Enable. */
++	unsigned b_hnp_enable:1;
++	/** The state of A-Device HNP Support. */
++	unsigned a_hnp_support:1;
++	/** The state of the A-Device Alt HNP support. */
++	unsigned a_alt_hnp_support:1;
++	/** Count of pending Requests */
++	unsigned request_pending;
++
++	/** SETUP packet for EP0
++	 * This structure is allocated as a DMA buffer on PCD initialization
++	 * with enough space for up to 3 setup packets.
++	 */
++	union {
++		usb_device_request_t req;
++		uint32_t d32[2];
++	} *setup_pkt;
++
++	dwc_dma_t setup_pkt_dma_handle;
++
++	/* Additional buffer and flag for CTRL_WR premature case */
++	uint8_t *backup_buf;
++	unsigned data_terminated;
++
++	/** 2-byte dma buffer used to return status from GET_STATUS */
++	uint16_t *status_buf;
++	dwc_dma_t status_buf_dma_handle;
++
++	/** EP0 */
++	dwc_otg_pcd_ep_t ep0;
++
++	/** Array of IN EPs. */
++	dwc_otg_pcd_ep_t in_ep[MAX_EPS_CHANNELS - 1];
++	/** Array of OUT EPs. */
++	dwc_otg_pcd_ep_t out_ep[MAX_EPS_CHANNELS - 1];
++	/** number of valid EPs in the above array. */
++//        unsigned      num_eps : 4;
++	dwc_spinlock_t *lock;
++
++	/** Tasklet to defer starting of TEST mode transmissions until
++	 *	Status Phase has been completed.
++	 */
++	dwc_tasklet_t *test_mode_tasklet;
++
++	/** Tasklet to delay starting of xfer in DMA mode */
++	dwc_tasklet_t *start_xfer_tasklet;
++
++	/** The test mode to enter when the tasklet is executed. */
++	unsigned test_mode;
++	/** The cfi_api structure that implements most of the CFI API
++	 * and OTG specific core configuration functionality
++	 */
++#ifdef DWC_UTE_CFI
++	struct cfiobject *cfi;
++#endif
++
++};
++
++//FIXME this functions should be static, and this prototypes should be removed
++extern void dwc_otg_request_nuke(dwc_otg_pcd_ep_t * ep);
++extern void dwc_otg_request_done(dwc_otg_pcd_ep_t * ep,
++				 dwc_otg_pcd_request_t * req, int32_t status);
++
++void dwc_otg_iso_buffer_done(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep,
++			     void *req_handle);
++
++extern void do_test_mode(void *data);
++#endif
++#endif /* DWC_HOST_ONLY */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,360 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_if.h $
++ * $Revision: #11 $
++ * $Date: 2011/10/26 $
++ * $Change: 1873028 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_HOST_ONLY
++
++#if !defined(__DWC_PCD_IF_H__)
++#define __DWC_PCD_IF_H__
++
++//#include "dwc_os.h"
++#include "dwc_otg_core_if.h"
++
++/** @file
++ * This file defines DWC_OTG PCD Core API.
++ */
++
++struct dwc_otg_pcd;
++typedef struct dwc_otg_pcd dwc_otg_pcd_t;
++
++/** Maxpacket size for EP0 */
++#define MAX_EP0_SIZE	64
++/** Maxpacket size for any EP */
++#define MAX_PACKET_SIZE 1024
++
++/** @name Function Driver Callbacks */
++/** @{ */
++
++/** This function will be called whenever a previously queued request has
++ * completed.  The status value will be set to -DWC_E_SHUTDOWN to indicated a
++ * failed or aborted transfer, or -DWC_E_RESTART to indicate the device was reset,
++ * or -DWC_E_TIMEOUT to indicate it timed out, or -DWC_E_INVALID to indicate invalid
++ * parameters. */
++typedef int (*dwc_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle,
++				    void *req_handle, int32_t status,
++				    uint32_t actual);
++/**
++ * This function will be called whenever a previousle queued ISOC request has
++ * completed. Count of ISOC packets could be read using dwc_otg_pcd_get_iso_packet_count
++ * function.
++ * The status of each ISOC packet could be read using dwc_otg_pcd_get_iso_packet_*
++ * functions.
++ */
++typedef int (*dwc_isoc_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle,
++					 void *req_handle, int proc_buf_num);
++/** This function should handle any SETUP request that cannot be handled by the
++ * PCD Core.  This includes most GET_DESCRIPTORs, SET_CONFIGS, Any
++ * class-specific requests, etc.  The function must non-blocking.
++ *
++ * Returns 0 on success.
++ * Returns -DWC_E_NOT_SUPPORTED if the request is not supported.
++ * Returns -DWC_E_INVALID if the setup request had invalid parameters or bytes.
++ * Returns -DWC_E_SHUTDOWN on any other error. */
++typedef int (*dwc_setup_cb_t) (dwc_otg_pcd_t * pcd, uint8_t * bytes);
++/** This is called whenever the device has been disconnected.  The function
++ * driver should take appropriate action to clean up all pending requests in the
++ * PCD Core, remove all endpoints (except ep0), and initialize back to reset
++ * state. */
++typedef int (*dwc_disconnect_cb_t) (dwc_otg_pcd_t * pcd);
++/** This function is called when device has been connected. */
++typedef int (*dwc_connect_cb_t) (dwc_otg_pcd_t * pcd, int speed);
++/** This function is called when device has been suspended */
++typedef int (*dwc_suspend_cb_t) (dwc_otg_pcd_t * pcd);
++/** This function is called when device has received LPM tokens, i.e.
++ * device has been sent to sleep state. */
++typedef int (*dwc_sleep_cb_t) (dwc_otg_pcd_t * pcd);
++/** This function is called when device has been resumed
++ * from suspend(L2) or L1 sleep state. */
++typedef int (*dwc_resume_cb_t) (dwc_otg_pcd_t * pcd);
++/** This function is called whenever hnp params has been changed.
++ * User can call get_b_hnp_enable, get_a_hnp_support, get_a_alt_hnp_support functions
++ * to get hnp parameters. */
++typedef int (*dwc_hnp_params_changed_cb_t) (dwc_otg_pcd_t * pcd);
++/** This function is called whenever USB RESET is detected. */
++typedef int (*dwc_reset_cb_t) (dwc_otg_pcd_t * pcd);
++
++typedef int (*cfi_setup_cb_t) (dwc_otg_pcd_t * pcd, void *ctrl_req_bytes);
++
++/**
++ *
++ * @param ep_handle	Void pointer to the usb_ep structure
++ * @param ereq_port Pointer to the extended request structure created in the
++ *					portable part.
++ */
++typedef int (*xiso_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle,
++				     void *req_handle, int32_t status,
++				     void *ereq_port);
++/** Function Driver Ops Data Structure */
++struct dwc_otg_pcd_function_ops {
++	dwc_connect_cb_t connect;
++	dwc_disconnect_cb_t disconnect;
++	dwc_setup_cb_t setup;
++	dwc_completion_cb_t complete;
++	dwc_isoc_completion_cb_t isoc_complete;
++	dwc_suspend_cb_t suspend;
++	dwc_sleep_cb_t sleep;
++	dwc_resume_cb_t resume;
++	dwc_reset_cb_t reset;
++	dwc_hnp_params_changed_cb_t hnp_changed;
++	cfi_setup_cb_t cfi_setup;
++#ifdef DWC_UTE_PER_IO
++	xiso_completion_cb_t xisoc_complete;
++#endif
++};
++/** @} */
++
++/** @name Function Driver Functions */
++/** @{ */
++
++/** Call this function to get pointer on dwc_otg_pcd_t,
++ * this pointer will be used for all PCD API functions.
++ *
++ * @param core_if The DWC_OTG Core
++ */
++extern dwc_otg_pcd_t *dwc_otg_pcd_init(dwc_otg_core_if_t * core_if);
++
++/** Frees PCD allocated by dwc_otg_pcd_init
++ *
++ * @param pcd The PCD
++ */
++extern void dwc_otg_pcd_remove(dwc_otg_pcd_t * pcd);
++
++/** Call this to bind the function driver to the PCD Core.
++ *
++ * @param pcd Pointer on dwc_otg_pcd_t returned by dwc_otg_pcd_init function.
++ * @param fops The Function Driver Ops data structure containing pointers to all callbacks.
++ */
++extern void dwc_otg_pcd_start(dwc_otg_pcd_t * pcd,
++			      const struct dwc_otg_pcd_function_ops *fops);
++
++/** Enables an endpoint for use.  This function enables an endpoint in
++ * the PCD.  The endpoint is described by the ep_desc which has the
++ * same format as a USB ep descriptor.  The ep_handle parameter is used to refer
++ * to the endpoint from other API functions and in callbacks.  Normally this
++ * should be called after a SET_CONFIGURATION/SET_INTERFACE to configure the
++ * core for that interface.
++ *
++ * Returns -DWC_E_INVALID if invalid parameters were passed.
++ * Returns -DWC_E_SHUTDOWN if any other error ocurred.
++ * Returns 0 on success.
++ *
++ * @param pcd The PCD
++ * @param ep_desc Endpoint descriptor
++ * @param usb_ep Handle on endpoint, that will be used to identify endpoint.
++ */
++extern int dwc_otg_pcd_ep_enable(dwc_otg_pcd_t * pcd,
++				 const uint8_t * ep_desc, void *usb_ep);
++
++/** Disable the endpoint referenced by ep_handle.
++ *
++ * Returns -DWC_E_INVALID if invalid parameters were passed.
++ * Returns -DWC_E_SHUTDOWN if any other error occurred.
++ * Returns 0 on success. */
++extern int dwc_otg_pcd_ep_disable(dwc_otg_pcd_t * pcd, void *ep_handle);
++
++/** Queue a data transfer request on the endpoint referenced by ep_handle.
++ * After the transfer is completes, the complete callback will be called with
++ * the request status.
++ *
++ * @param pcd The PCD
++ * @param ep_handle The handle of the endpoint
++ * @param buf The buffer for the data
++ * @param dma_buf The DMA buffer for the data
++ * @param buflen The length of the data transfer
++ * @param zero Specifies whether to send zero length last packet.
++ * @param req_handle Set this handle to any value to use to reference this
++ * request in the ep_dequeue function or from the complete callback
++ * @param atomic_alloc If driver need to perform atomic allocations
++ * for internal data structures.
++ *
++ * Returns -DWC_E_INVALID if invalid parameters were passed.
++ * Returns -DWC_E_SHUTDOWN if any other error ocurred.
++ * Returns 0 on success. */
++extern int dwc_otg_pcd_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle,
++				uint8_t * buf, dwc_dma_t dma_buf,
++				uint32_t buflen, int zero, void *req_handle,
++				int atomic_alloc);
++#ifdef DWC_UTE_PER_IO
++/**
++ *
++ * @param ereq_nonport	Pointer to the extended request part of the
++ *						usb_request structure defined in usb_gadget.h file.
++ */
++extern int dwc_otg_pcd_xiso_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle,
++				     uint8_t * buf, dwc_dma_t dma_buf,
++				     uint32_t buflen, int zero,
++				     void *req_handle, int atomic_alloc,
++				     void *ereq_nonport);
++
++#endif
++
++/** De-queue the specified data transfer that has not yet completed.
++ *
++ * Returns -DWC_E_INVALID if invalid parameters were passed.
++ * Returns -DWC_E_SHUTDOWN if any other error ocurred.
++ * Returns 0 on success. */
++extern int dwc_otg_pcd_ep_dequeue(dwc_otg_pcd_t * pcd, void *ep_handle,
++				  void *req_handle);
++
++/** Halt (STALL) an endpoint or clear it.
++ *
++ * Returns -DWC_E_INVALID if invalid parameters were passed.
++ * Returns -DWC_E_SHUTDOWN if any other error ocurred.
++ * Returns -DWC_E_AGAIN if the STALL cannot be sent and must be tried again later
++ * Returns 0 on success. */
++extern int dwc_otg_pcd_ep_halt(dwc_otg_pcd_t * pcd, void *ep_handle, int value);
++
++/** This function */
++extern int dwc_otg_pcd_ep_wedge(dwc_otg_pcd_t * pcd, void *ep_handle);
++
++/** This function should be called on every hardware interrupt */
++extern int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t * pcd);
++
++/** This function returns current frame number */
++extern int dwc_otg_pcd_get_frame_number(dwc_otg_pcd_t * pcd);
++
++/**
++ * Start isochronous transfers on the endpoint referenced by ep_handle.
++ * For isochronous transfers duble buffering is used.
++ * After processing each of buffers comlete callback will be called with
++ * status for each transaction.
++ *
++ * @param pcd The PCD
++ * @param ep_handle The handle of the endpoint
++ * @param buf0 The virtual address of first data buffer
++ * @param buf1 The virtual address of second data buffer
++ * @param dma0 The DMA address of first data buffer
++ * @param dma1 The DMA address of second data buffer
++ * @param sync_frame Data pattern frame number
++ * @param dp_frame Data size for pattern frame
++ * @param data_per_frame Data size for regular frame
++ * @param start_frame Frame number to start transfers, if -1 then start transfers ASAP.
++ * @param buf_proc_intrvl Interval of ISOC Buffer processing
++ * @param req_handle Handle of ISOC request
++ * @param atomic_alloc Specefies whether to perform atomic allocation for
++ * 			internal data structures.
++ *
++ * Returns -DWC_E_NO_MEMORY if there is no enough memory.
++ * Returns -DWC_E_INVALID if incorrect arguments are passed to the function.
++ * Returns -DW_E_SHUTDOWN for any other error.
++ * Returns 0 on success
++ */
++extern int dwc_otg_pcd_iso_ep_start(dwc_otg_pcd_t * pcd, void *ep_handle,
++				    uint8_t * buf0, uint8_t * buf1,
++				    dwc_dma_t dma0, dwc_dma_t dma1,
++				    int sync_frame, int dp_frame,
++				    int data_per_frame, int start_frame,
++				    int buf_proc_intrvl, void *req_handle,
++				    int atomic_alloc);
++
++/** Stop ISOC transfers on endpoint referenced by ep_handle.
++ *
++ * @param pcd The PCD
++ * @param ep_handle The handle of the endpoint
++ * @param req_handle Handle of ISOC request
++ *
++ * Returns -DWC_E_INVALID if incorrect arguments are passed to the function
++ * Returns 0 on success
++ */
++int dwc_otg_pcd_iso_ep_stop(dwc_otg_pcd_t * pcd, void *ep_handle,
++			    void *req_handle);
++
++/** Get ISOC packet status.
++ *
++ * @param pcd The PCD
++ * @param ep_handle The handle of the endpoint
++ * @param iso_req_handle Isochronoush request handle
++ * @param packet Number of packet
++ * @param status Out parameter for returning status
++ * @param actual Out parameter for returning actual length
++ * @param offset Out parameter for returning offset
++ *
++ */
++extern void dwc_otg_pcd_get_iso_packet_params(dwc_otg_pcd_t * pcd,
++					      void *ep_handle,
++					      void *iso_req_handle, int packet,
++					      int *status, int *actual,
++					      int *offset);
++
++/** Get ISOC packet count.
++ *
++ * @param pcd The PCD
++ * @param ep_handle The handle of the endpoint
++ * @param iso_req_handle
++ */
++extern int dwc_otg_pcd_get_iso_packet_count(dwc_otg_pcd_t * pcd,
++					    void *ep_handle,
++					    void *iso_req_handle);
++
++/** This function starts the SRP Protocol if no session is in progress. If
++ * a session is already in progress, but the device is suspended,
++ * remote wakeup signaling is started.
++ */
++extern int dwc_otg_pcd_wakeup(dwc_otg_pcd_t * pcd);
++
++/** This function returns 1 if LPM support is enabled, and 0 otherwise. */
++extern int dwc_otg_pcd_is_lpm_enabled(dwc_otg_pcd_t * pcd);
++
++/** This function returns 1 if remote wakeup is allowed and 0, otherwise. */
++extern int dwc_otg_pcd_get_rmwkup_enable(dwc_otg_pcd_t * pcd);
++
++/** Initiate SRP */
++extern void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t * pcd);
++
++/** Starts remote wakeup signaling. */
++extern void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t * pcd, int set);
++
++/** Starts micorsecond soft disconnect. */
++extern void dwc_otg_pcd_disconnect_us(dwc_otg_pcd_t * pcd, int no_of_usecs);
++/** This function returns whether device is dualspeed.*/
++extern uint32_t dwc_otg_pcd_is_dualspeed(dwc_otg_pcd_t * pcd);
++
++/** This function returns whether device is otg. */
++extern uint32_t dwc_otg_pcd_is_otg(dwc_otg_pcd_t * pcd);
++
++/** These functions allow to get hnp parameters */
++extern uint32_t get_b_hnp_enable(dwc_otg_pcd_t * pcd);
++extern uint32_t get_a_hnp_support(dwc_otg_pcd_t * pcd);
++extern uint32_t get_a_alt_hnp_support(dwc_otg_pcd_t * pcd);
++
++/** CFI specific Interface functions */
++/** Allocate a cfi buffer */
++extern uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep,
++				     dwc_dma_t * addr, size_t buflen,
++				     int flags);
++
++/******************************************************************************/
++
++/** @} */
++
++#endif				/* __DWC_PCD_IF_H__ */
++
++#endif				/* DWC_HOST_ONLY */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,5147 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_intr.c $
++ * $Revision: #116 $
++ * $Date: 2012/08/10 $
++ * $Change: 2047372 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_HOST_ONLY
++
++#include "dwc_otg_pcd.h"
++
++#ifdef DWC_UTE_CFI
++#include "dwc_otg_cfi.h"
++#endif
++
++#ifdef DWC_UTE_PER_IO
++extern void complete_xiso_ep(dwc_otg_pcd_ep_t * ep);
++#endif
++//#define PRINT_CFI_DMA_DESCS
++
++#define DEBUG_EP0
++
++/**
++ * This function updates OTG.
++ */
++static void dwc_otg_pcd_update_otg(dwc_otg_pcd_t * pcd, const unsigned reset)
++{
++
++	if (reset) {
++		pcd->b_hnp_enable = 0;
++		pcd->a_hnp_support = 0;
++		pcd->a_alt_hnp_support = 0;
++	}
++
++	if (pcd->fops->hnp_changed) {
++		pcd->fops->hnp_changed(pcd);
++	}
++}
++
++/** @file
++ * This file contains the implementation of the PCD Interrupt handlers.
++ *
++ * The PCD handles the device interrupts.  Many conditions can cause a
++ * device interrupt. When an interrupt occurs, the device interrupt
++ * service routine determines the cause of the interrupt and
++ * dispatches handling to the appropriate function. These interrupt
++ * handling functions are described below.
++ * All interrupt registers are processed from LSB to MSB.
++ */
++
++/**
++ * This function prints the ep0 state for debug purposes.
++ */
++static inline void print_ep0_state(dwc_otg_pcd_t * pcd)
++{
++#ifdef DEBUG
++	char str[40];
++
++	switch (pcd->ep0state) {
++	case EP0_DISCONNECT:
++		dwc_strcpy(str, "EP0_DISCONNECT");
++		break;
++	case EP0_IDLE:
++		dwc_strcpy(str, "EP0_IDLE");
++		break;
++	case EP0_IN_DATA_PHASE:
++		dwc_strcpy(str, "EP0_IN_DATA_PHASE");
++		break;
++	case EP0_OUT_DATA_PHASE:
++		dwc_strcpy(str, "EP0_OUT_DATA_PHASE");
++		break;
++	case EP0_IN_STATUS_PHASE:
++		dwc_strcpy(str, "EP0_IN_STATUS_PHASE");
++		break;
++	case EP0_OUT_STATUS_PHASE:
++		dwc_strcpy(str, "EP0_OUT_STATUS_PHASE");
++		break;
++	case EP0_STALL:
++		dwc_strcpy(str, "EP0_STALL");
++		break;
++	default:
++		dwc_strcpy(str, "EP0_INVALID");
++	}
++
++	DWC_DEBUGPL(DBG_ANY, "%s(%d)\n", str, pcd->ep0state);
++#endif
++}
++
++/**
++ * This function calculate the size of the payload in the memory
++ * for out endpoints and prints size for debug purposes(used in
++ * 2.93a DevOutNak feature).
++ */
++static inline void print_memory_payload(dwc_otg_pcd_t * pcd,  dwc_ep_t * ep)
++{
++#ifdef DEBUG
++	deptsiz_data_t deptsiz_init = {.d32 = 0 };
++	deptsiz_data_t deptsiz_updt = {.d32 = 0 };
++	int pack_num;
++	unsigned payload;
++
++	deptsiz_init.d32 = pcd->core_if->start_doeptsiz_val[ep->num];
++	deptsiz_updt.d32 =
++		DWC_READ_REG32(&pcd->core_if->dev_if->
++						out_ep_regs[ep->num]->doeptsiz);
++	/* Payload will be */
++	payload = deptsiz_init.b.xfersize - deptsiz_updt.b.xfersize;
++	/* Packet count is decremented every time a packet
++	 * is written to the RxFIFO not in to the external memory
++	 * So, if payload == 0, then it means no packet was sent to ext memory*/
++	pack_num = (!payload) ? 0 : (deptsiz_init.b.pktcnt - deptsiz_updt.b.pktcnt);
++	DWC_DEBUGPL(DBG_PCDV,
++		"Payload for EP%d-%s\n",
++		ep->num, (ep->is_in ? "IN" : "OUT"));
++	DWC_DEBUGPL(DBG_PCDV,
++		"Number of transfered bytes = 0x%08x\n", payload);
++	DWC_DEBUGPL(DBG_PCDV,
++		"Number of transfered packets = %d\n", pack_num);
++#endif
++}
++
++
++#ifdef DWC_UTE_CFI
++static inline void print_desc(struct dwc_otg_dma_desc *ddesc,
++			      const uint8_t * epname, int descnum)
++{
++	CFI_INFO
++	    ("%s DMA_DESC(%d) buf=0x%08x bytes=0x%04x; sp=0x%x; l=0x%x; sts=0x%02x; bs=0x%02x\n",
++	     epname, descnum, ddesc->buf, ddesc->status.b.bytes,
++	     ddesc->status.b.sp, ddesc->status.b.l, ddesc->status.b.sts,
++	     ddesc->status.b.bs);
++}
++#endif
++
++/**
++ * This function returns pointer to in ep struct with number ep_num
++ */
++static inline dwc_otg_pcd_ep_t *get_in_ep(dwc_otg_pcd_t * pcd, uint32_t ep_num)
++{
++	int i;
++	int num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps;
++	if (ep_num == 0) {
++		return &pcd->ep0;
++	} else {
++		for (i = 0; i < num_in_eps; ++i) {
++			if (pcd->in_ep[i].dwc_ep.num == ep_num)
++				return &pcd->in_ep[i];
++		}
++		return 0;
++	}
++}
++
++/**
++ * This function returns pointer to out ep struct with number ep_num
++ */
++static inline dwc_otg_pcd_ep_t *get_out_ep(dwc_otg_pcd_t * pcd, uint32_t ep_num)
++{
++	int i;
++	int num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps;
++	if (ep_num == 0) {
++		return &pcd->ep0;
++	} else {
++		for (i = 0; i < num_out_eps; ++i) {
++			if (pcd->out_ep[i].dwc_ep.num == ep_num)
++				return &pcd->out_ep[i];
++		}
++		return 0;
++	}
++}
++
++/**
++ * This functions gets a pointer to an EP from the wIndex address
++ * value of the control request.
++ */
++dwc_otg_pcd_ep_t *get_ep_by_addr(dwc_otg_pcd_t * pcd, u16 wIndex)
++{
++	dwc_otg_pcd_ep_t *ep;
++	uint32_t ep_num = UE_GET_ADDR(wIndex);
++
++	if (ep_num == 0) {
++		ep = &pcd->ep0;
++	} else if (UE_GET_DIR(wIndex) == UE_DIR_IN) {	/* in ep */
++		ep = &pcd->in_ep[ep_num - 1];
++	} else {
++		ep = &pcd->out_ep[ep_num - 1];
++	}
++
++	return ep;
++}
++
++/**
++ * This function checks the EP request queue, if the queue is not
++ * empty the next request is started.
++ */
++void start_next_request(dwc_otg_pcd_ep_t * ep)
++{
++	dwc_otg_pcd_request_t *req = 0;
++	uint32_t max_transfer =
++	    GET_CORE_IF(ep->pcd)->core_params->max_transfer_size;
++
++#ifdef DWC_UTE_CFI
++	struct dwc_otg_pcd *pcd;
++	pcd = ep->pcd;
++#endif
++
++	if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++		req = DWC_CIRCLEQ_FIRST(&ep->queue);
++
++#ifdef DWC_UTE_CFI
++		if (ep->dwc_ep.buff_mode != BM_STANDARD) {
++			ep->dwc_ep.cfi_req_len = req->length;
++			pcd->cfi->ops.build_descriptors(pcd->cfi, pcd, ep, req);
++		} else {
++#endif
++			/* Setup and start the Transfer */
++			if (req->dw_align_buf) {
++				ep->dwc_ep.dma_addr = req->dw_align_buf_dma;
++				ep->dwc_ep.start_xfer_buff = req->dw_align_buf;
++				ep->dwc_ep.xfer_buff = req->dw_align_buf;
++			} else {
++				ep->dwc_ep.dma_addr = req->dma;
++				ep->dwc_ep.start_xfer_buff = req->buf;
++				ep->dwc_ep.xfer_buff = req->buf;
++			}
++			ep->dwc_ep.sent_zlp = 0;
++			ep->dwc_ep.total_len = req->length;
++			ep->dwc_ep.xfer_len = 0;
++			ep->dwc_ep.xfer_count = 0;
++
++			ep->dwc_ep.maxxfer = max_transfer;
++			if (GET_CORE_IF(ep->pcd)->dma_desc_enable) {
++				uint32_t out_max_xfer = DDMA_MAX_TRANSFER_SIZE
++				    - (DDMA_MAX_TRANSFER_SIZE % 4);
++				if (ep->dwc_ep.is_in) {
++					if (ep->dwc_ep.maxxfer >
++					    DDMA_MAX_TRANSFER_SIZE) {
++						ep->dwc_ep.maxxfer =
++						    DDMA_MAX_TRANSFER_SIZE;
++					}
++				} else {
++					if (ep->dwc_ep.maxxfer > out_max_xfer) {
++						ep->dwc_ep.maxxfer =
++						    out_max_xfer;
++					}
++				}
++			}
++			if (ep->dwc_ep.maxxfer < ep->dwc_ep.total_len) {
++				ep->dwc_ep.maxxfer -=
++				    (ep->dwc_ep.maxxfer % ep->dwc_ep.maxpacket);
++			}
++			if (req->sent_zlp) {
++				if ((ep->dwc_ep.total_len %
++				     ep->dwc_ep.maxpacket == 0)
++				    && (ep->dwc_ep.total_len != 0)) {
++					ep->dwc_ep.sent_zlp = 1;
++				}
++
++			}
++#ifdef DWC_UTE_CFI
++		}
++#endif
++		dwc_otg_ep_start_transfer(GET_CORE_IF(ep->pcd), &ep->dwc_ep);
++	} else if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
++		DWC_PRINTF("There are no more ISOC requests \n");
++		ep->dwc_ep.frame_num = 0xFFFFFFFF;
++	}
++}
++
++/**
++ * This function handles the SOF Interrupts. At this time the SOF
++ * Interrupt is disabled.
++ */
++int32_t dwc_otg_pcd_handle_sof_intr(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++
++	gintsts_data_t gintsts;
++
++	DWC_DEBUGPL(DBG_PCD, "SOF\n");
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.sofintr = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This function handles the Rx Status Queue Level Interrupt, which
++ * indicates that there is a least one packet in the Rx FIFO.  The
++ * packets are moved from the FIFO to memory, where they will be
++ * processed when the Endpoint Interrupt Register indicates Transfer
++ * Complete or SETUP Phase Done.
++ *
++ * Repeat the following until the Rx Status Queue is empty:
++ *	 -# Read the Receive Status Pop Register (GRXSTSP) to get Packet
++ *		info
++ *	 -# If Receive FIFO is empty then skip to step Clear the interrupt
++ *		and exit
++ *	 -# If SETUP Packet call dwc_otg_read_setup_packet to copy the
++ *		SETUP data to the buffer
++ *	 -# If OUT Data Packet call dwc_otg_read_packet to copy the data
++ *		to the destination buffer
++ */
++int32_t dwc_otg_pcd_handle_rx_status_q_level_intr(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	gintmsk_data_t gintmask = {.d32 = 0 };
++	device_grxsts_data_t status;
++	dwc_otg_pcd_ep_t *ep;
++	gintsts_data_t gintsts;
++#ifdef DEBUG
++	static char *dpid_str[] = { "D0", "D2", "D1", "MDATA" };
++#endif
++
++	//DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, _pcd);
++	/* Disable the Rx Status Queue Level interrupt */
++	gintmask.b.rxstsqlvl = 1;
++	DWC_MODIFY_REG32(&global_regs->gintmsk, gintmask.d32, 0);
++
++	/* Get the Status from the top of the FIFO */
++	status.d32 = DWC_READ_REG32(&global_regs->grxstsp);
++
++	DWC_DEBUGPL(DBG_PCD, "EP:%d BCnt:%d DPID:%s "
++		    "pktsts:%x Frame:%d(0x%0x)\n",
++		    status.b.epnum, status.b.bcnt,
++		    dpid_str[status.b.dpid],
++		    status.b.pktsts, status.b.fn, status.b.fn);
++	/* Get pointer to EP structure */
++	ep = get_out_ep(pcd, status.b.epnum);
++
++	switch (status.b.pktsts) {
++	case DWC_DSTS_GOUT_NAK:
++		DWC_DEBUGPL(DBG_PCDV, "Global OUT NAK\n");
++		break;
++	case DWC_STS_DATA_UPDT:
++		DWC_DEBUGPL(DBG_PCDV, "OUT Data Packet\n");
++		if (status.b.bcnt && ep->dwc_ep.xfer_buff) {
++			/** @todo NGS Check for buffer overflow? */
++			dwc_otg_read_packet(core_if,
++					    ep->dwc_ep.xfer_buff,
++					    status.b.bcnt);
++			ep->dwc_ep.xfer_count += status.b.bcnt;
++			ep->dwc_ep.xfer_buff += status.b.bcnt;
++		}
++		break;
++	case DWC_STS_XFER_COMP:
++		DWC_DEBUGPL(DBG_PCDV, "OUT Complete\n");
++		break;
++	case DWC_DSTS_SETUP_COMP:
++#ifdef DEBUG_EP0
++		DWC_DEBUGPL(DBG_PCDV, "Setup Complete\n");
++#endif
++		break;
++	case DWC_DSTS_SETUP_UPDT:
++		dwc_otg_read_setup_packet(core_if, pcd->setup_pkt->d32);
++#ifdef DEBUG_EP0
++		DWC_DEBUGPL(DBG_PCD,
++			    "SETUP PKT: %02x.%02x v%04x i%04x l%04x\n",
++			    pcd->setup_pkt->req.bmRequestType,
++			    pcd->setup_pkt->req.bRequest,
++			    UGETW(pcd->setup_pkt->req.wValue),
++			    UGETW(pcd->setup_pkt->req.wIndex),
++			    UGETW(pcd->setup_pkt->req.wLength));
++#endif
++		ep->dwc_ep.xfer_count += status.b.bcnt;
++		break;
++	default:
++		DWC_DEBUGPL(DBG_PCDV, "Invalid Packet Status (0x%0x)\n",
++			    status.b.pktsts);
++		break;
++	}
++
++	/* Enable the Rx Status Queue Level interrupt */
++	DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmask.d32);
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.rxstsqlvl = 1;
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	//DWC_DEBUGPL(DBG_PCDV, "EXIT: %s\n", __func__);
++	return 1;
++}
++
++/**
++ * This function examines the Device IN Token Learning Queue to
++ * determine the EP number of the last IN token received.  This
++ * implementation is for the Mass Storage device where there are only
++ * 2 IN EPs (Control-IN and BULK-IN).
++ *
++ * The EP numbers for the first six IN Tokens are in DTKNQR1 and there
++ * are 8 EP Numbers in each of the other possible DTKNQ Registers.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ *
++ */
++static inline int get_ep_of_last_in_token(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_device_global_regs_t *dev_global_regs =
++	    core_if->dev_if->dev_global_regs;
++	const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth;
++	/* Number of Token Queue Registers */
++	const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8;
++	dtknq1_data_t dtknqr1;
++	uint32_t in_tkn_epnums[4];
++	int ndx = 0;
++	int i = 0;
++	volatile uint32_t *addr = &dev_global_regs->dtknqr1;
++	int epnum = 0;
++
++	//DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH);
++
++	/* Read the DTKNQ Registers */
++	for (i = 0; i < DTKNQ_REG_CNT; i++) {
++		in_tkn_epnums[i] = DWC_READ_REG32(addr);
++		DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i + 1,
++			    in_tkn_epnums[i]);
++		if (addr == &dev_global_regs->dvbusdis) {
++			addr = &dev_global_regs->dtknqr3_dthrctl;
++		} else {
++			++addr;
++		}
++
++	}
++
++	/* Copy the DTKNQR1 data to the bit field. */
++	dtknqr1.d32 = in_tkn_epnums[0];
++	/* Get the EP numbers */
++	in_tkn_epnums[0] = dtknqr1.b.epnums0_5;
++	ndx = dtknqr1.b.intknwptr - 1;
++
++	//DWC_DEBUGPL(DBG_PCDV,"ndx=%d\n",ndx);
++	if (ndx == -1) {
++		/** @todo Find a simpler way to calculate the max
++		 * queue position.*/
++		int cnt = TOKEN_Q_DEPTH;
++		if (TOKEN_Q_DEPTH <= 6) {
++			cnt = TOKEN_Q_DEPTH - 1;
++		} else if (TOKEN_Q_DEPTH <= 14) {
++			cnt = TOKEN_Q_DEPTH - 7;
++		} else if (TOKEN_Q_DEPTH <= 22) {
++			cnt = TOKEN_Q_DEPTH - 15;
++		} else {
++			cnt = TOKEN_Q_DEPTH - 23;
++		}
++		epnum = (in_tkn_epnums[DTKNQ_REG_CNT - 1] >> (cnt * 4)) & 0xF;
++	} else {
++		if (ndx <= 5) {
++			epnum = (in_tkn_epnums[0] >> (ndx * 4)) & 0xF;
++		} else if (ndx <= 13) {
++			ndx -= 6;
++			epnum = (in_tkn_epnums[1] >> (ndx * 4)) & 0xF;
++		} else if (ndx <= 21) {
++			ndx -= 14;
++			epnum = (in_tkn_epnums[2] >> (ndx * 4)) & 0xF;
++		} else if (ndx <= 29) {
++			ndx -= 22;
++			epnum = (in_tkn_epnums[3] >> (ndx * 4)) & 0xF;
++		}
++	}
++	//DWC_DEBUGPL(DBG_PCD,"epnum=%d\n",epnum);
++	return epnum;
++}
++
++/**
++ * This interrupt occurs when the non-periodic Tx FIFO is half-empty.
++ * The active request is checked for the next packet to be loaded into
++ * the non-periodic Tx FIFO.
++ */
++int32_t dwc_otg_pcd_handle_np_tx_fifo_empty_intr(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	dwc_otg_dev_in_ep_regs_t *ep_regs;
++	gnptxsts_data_t txstatus = {.d32 = 0 };
++	gintsts_data_t gintsts;
++
++	int epnum = 0;
++	dwc_otg_pcd_ep_t *ep = 0;
++	uint32_t len = 0;
++	int dwords;
++
++	/* Get the epnum from the IN Token Learning Queue. */
++	epnum = get_ep_of_last_in_token(core_if);
++	ep = get_in_ep(pcd, epnum);
++
++	DWC_DEBUGPL(DBG_PCD, "NP TxFifo Empty: %d \n", epnum);
++
++	ep_regs = core_if->dev_if->in_ep_regs[epnum];
++
++	len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
++	if (len > ep->dwc_ep.maxpacket) {
++		len = ep->dwc_ep.maxpacket;
++	}
++	dwords = (len + 3) / 4;
++
++	/* While there is space in the queue and space in the FIFO and
++	 * More data to tranfer, Write packets to the Tx FIFO */
++	txstatus.d32 = DWC_READ_REG32(&global_regs->gnptxsts);
++	DWC_DEBUGPL(DBG_PCDV, "b4 GNPTXSTS=0x%08x\n", txstatus.d32);
++
++	while (txstatus.b.nptxqspcavail > 0 &&
++	       txstatus.b.nptxfspcavail > dwords &&
++	       ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len) {
++		/* Write the FIFO */
++		dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0);
++		len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
++
++		if (len > ep->dwc_ep.maxpacket) {
++			len = ep->dwc_ep.maxpacket;
++		}
++
++		dwords = (len + 3) / 4;
++		txstatus.d32 = DWC_READ_REG32(&global_regs->gnptxsts);
++		DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n", txstatus.d32);
++	}
++
++	DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n",
++		    DWC_READ_REG32(&global_regs->gnptxsts));
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.nptxfempty = 1;
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This function is called when dedicated Tx FIFO Empty interrupt occurs.
++ * The active request is checked for the next packet to be loaded into
++ * apropriate Tx FIFO.
++ */
++static int32_t write_empty_tx_fifo(dwc_otg_pcd_t * pcd, uint32_t epnum)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	dwc_otg_dev_in_ep_regs_t *ep_regs;
++	dtxfsts_data_t txstatus = {.d32 = 0 };
++	dwc_otg_pcd_ep_t *ep = 0;
++	uint32_t len = 0;
++	int dwords;
++
++	ep = get_in_ep(pcd, epnum);
++
++	DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %d \n", epnum);
++
++	ep_regs = core_if->dev_if->in_ep_regs[epnum];
++
++	len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
++
++	if (len > ep->dwc_ep.maxpacket) {
++		len = ep->dwc_ep.maxpacket;
++	}
++
++	dwords = (len + 3) / 4;
++
++	/* While there is space in the queue and space in the FIFO and
++	 * More data to tranfer, Write packets to the Tx FIFO */
++	txstatus.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts);
++	DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32);
++
++	while (txstatus.b.txfspcavail > dwords &&
++	       ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len &&
++	       ep->dwc_ep.xfer_len != 0) {
++		/* Write the FIFO */
++		dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0);
++
++		len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
++		if (len > ep->dwc_ep.maxpacket) {
++			len = ep->dwc_ep.maxpacket;
++		}
++
++		dwords = (len + 3) / 4;
++		txstatus.d32 =
++		    DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts);
++		DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", epnum,
++			    txstatus.d32);
++	}
++
++	DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum,
++		    DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts));
++
++	return 1;
++}
++
++/**
++ * This function is called when the Device is disconnected. It stops
++ * any active requests and informs the Gadget driver of the
++ * disconnect.
++ */
++void dwc_otg_pcd_stop(dwc_otg_pcd_t * pcd)
++{
++	int i, num_in_eps, num_out_eps;
++	dwc_otg_pcd_ep_t *ep;
++
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_SPINLOCK(pcd->lock);
++
++	num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps;
++	num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s() \n", __func__);
++	/* don't disconnect drivers more than once */
++	if (pcd->ep0state == EP0_DISCONNECT) {
++		DWC_DEBUGPL(DBG_ANY, "%s() Already Disconnected\n", __func__);
++		DWC_SPINUNLOCK(pcd->lock);
++		return;
++	}
++	pcd->ep0state = EP0_DISCONNECT;
++
++	/* Reset the OTG state. */
++	dwc_otg_pcd_update_otg(pcd, 1);
++
++	/* Disable the NP Tx Fifo Empty Interrupt. */
++	intr_mask.b.nptxfempty = 1;
++	DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++			 intr_mask.d32, 0);
++
++	/* Flush the FIFOs */
++	/**@todo NGS Flush Periodic FIFOs */
++	dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd), 0x10);
++	dwc_otg_flush_rx_fifo(GET_CORE_IF(pcd));
++
++	/* prevent new request submissions, kill any outstanding requests  */
++	ep = &pcd->ep0;
++	dwc_otg_request_nuke(ep);
++	/* prevent new request submissions, kill any outstanding requests  */
++	for (i = 0; i < num_in_eps; i++) {
++		dwc_otg_pcd_ep_t *ep = &pcd->in_ep[i];
++		dwc_otg_request_nuke(ep);
++	}
++	/* prevent new request submissions, kill any outstanding requests  */
++	for (i = 0; i < num_out_eps; i++) {
++		dwc_otg_pcd_ep_t *ep = &pcd->out_ep[i];
++		dwc_otg_request_nuke(ep);
++	}
++
++	/* report disconnect; the driver is already quiesced */
++	if (pcd->fops->disconnect) {
++		DWC_SPINUNLOCK(pcd->lock);
++		pcd->fops->disconnect(pcd);
++		DWC_SPINLOCK(pcd->lock);
++	}
++	DWC_SPINUNLOCK(pcd->lock);
++}
++
++/**
++ * This interrupt indicates that ...
++ */
++int32_t dwc_otg_pcd_handle_i2c_intr(dwc_otg_pcd_t * pcd)
++{
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	gintsts_data_t gintsts;
++
++	DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "i2cintr");
++	intr_mask.b.i2cintr = 1;
++	DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++			 intr_mask.d32, 0);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.i2cintr = 1;
++	DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			gintsts.d32);
++	return 1;
++}
++
++/**
++ * This interrupt indicates that ...
++ */
++int32_t dwc_otg_pcd_handle_early_suspend_intr(dwc_otg_pcd_t * pcd)
++{
++	gintsts_data_t gintsts;
++#if defined(VERBOSE)
++	DWC_PRINTF("Early Suspend Detected\n");
++#endif
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.erlysuspend = 1;
++	DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			gintsts.d32);
++	return 1;
++}
++
++/**
++ * This function configures EPO to receive SETUP packets.
++ *
++ * @todo NGS: Update the comments from the HW FS.
++ *
++ *	-# Program the following fields in the endpoint specific registers
++ *	for Control OUT EP 0, in order to receive a setup packet
++ *	- DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back
++ *	  setup packets)
++ *	- DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back
++ *	  to back setup packets)
++ *		- In DMA mode, DOEPDMA0 Register with a memory address to
++ *		  store any setup packets received
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param pcd	  Programming view of the PCD.
++ */
++static inline void ep0_out_start(dwc_otg_core_if_t * core_if,
++				 dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	deptsiz0_data_t doeptsize0 = {.d32 = 0 };
++	dwc_otg_dev_dma_desc_t *dma_desc;
++	depctl_data_t doepctl = {.d32 = 0 };
++
++#ifdef VERBOSE
++	DWC_DEBUGPL(DBG_PCDV, "%s() doepctl0=%0x\n", __func__,
++		    DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl));
++#endif
++	if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
++		doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl);
++		if (doepctl.b.epena) {
++			return;
++		}
++	}
++
++	doeptsize0.b.supcnt = 3;
++	doeptsize0.b.pktcnt = 1;
++	doeptsize0.b.xfersize = 8 * 3;
++
++	if (core_if->dma_enable) {
++		if (!core_if->dma_desc_enable) {
++			/** put here as for Hermes mode deptisz register should not be written */
++			DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doeptsiz,
++					doeptsize0.d32);
++
++			/** @todo dma needs to handle multiple setup packets (up to 3) */
++			DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepdma,
++					pcd->setup_pkt_dma_handle);
++		} else {
++			dev_if->setup_desc_index =
++			    (dev_if->setup_desc_index + 1) & 1;
++			dma_desc =
++			    dev_if->setup_desc_addr[dev_if->setup_desc_index];
++
++			/** DMA Descriptor Setup */
++			dma_desc->status.b.bs = BS_HOST_BUSY;
++			if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
++				dma_desc->status.b.sr = 0;
++				dma_desc->status.b.mtrf = 0;
++			}
++			dma_desc->status.b.l = 1;
++			dma_desc->status.b.ioc = 1;
++			dma_desc->status.b.bytes = pcd->ep0.dwc_ep.maxpacket;
++			dma_desc->buf = pcd->setup_pkt_dma_handle;
++			dma_desc->status.b.sts = 0;
++			dma_desc->status.b.bs = BS_HOST_READY;
++
++			/** DOEPDMA0 Register write */
++			DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepdma,
++					dev_if->dma_setup_desc_addr
++					[dev_if->setup_desc_index]);
++		}
++
++	} else {
++		/** put here as for Hermes mode deptisz register should not be written */
++		DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doeptsiz,
++				doeptsize0.d32);
++	}
++
++	/** DOEPCTL0 Register write cnak will be set after setup interrupt */
++	doepctl.d32 = 0;
++	doepctl.b.epena = 1;
++	if (core_if->snpsid <= OTG_CORE_REV_2_94a) {
++	doepctl.b.cnak = 1;
++	DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
++	} else {
++		DWC_MODIFY_REG32(&dev_if->out_ep_regs[0]->doepctl, 0, doepctl.d32);
++	}
++
++#ifdef VERBOSE
++	DWC_DEBUGPL(DBG_PCDV, "doepctl0=%0x\n",
++		    DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl));
++	DWC_DEBUGPL(DBG_PCDV, "diepctl0=%0x\n",
++		    DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl));
++#endif
++}
++
++/**
++ * This interrupt occurs when a USB Reset is detected. When the USB
++ * Reset Interrupt occurs the device state is set to DEFAULT and the
++ * EP0 state is set to IDLE.
++ *	-#	Set the NAK bit for all OUT endpoints (DOEPCTLn.SNAK = 1)
++ *	-#	Unmask the following interrupt bits
++ *		- DAINTMSK.INEP0 = 1 (Control 0 IN endpoint)
++ *	- DAINTMSK.OUTEP0 = 1 (Control 0 OUT endpoint)
++ *	- DOEPMSK.SETUP = 1
++ *	- DOEPMSK.XferCompl = 1
++ *	- DIEPMSK.XferCompl = 1
++ *	- DIEPMSK.TimeOut = 1
++ *	-# Program the following fields in the endpoint specific registers
++ *	for Control OUT EP 0, in order to receive a setup packet
++ *	- DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back
++ *	  setup packets)
++ *	- DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back
++ *	  to back setup packets)
++ *		- In DMA mode, DOEPDMA0 Register with a memory address to
++ *		  store any setup packets received
++ * At this point, all the required initialization, except for enabling
++ * the control 0 OUT endpoint is done, for receiving SETUP packets.
++ */
++int32_t dwc_otg_pcd_handle_usb_reset_intr(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	depctl_data_t doepctl = {.d32 = 0 };
++	depctl_data_t diepctl = {.d32 = 0 };
++	daint_data_t daintmsk = {.d32 = 0 };
++	doepmsk_data_t doepmsk = {.d32 = 0 };
++	diepmsk_data_t diepmsk = {.d32 = 0 };
++	dcfg_data_t dcfg = {.d32 = 0 };
++	grstctl_t resetctl = {.d32 = 0 };
++	dctl_data_t dctl = {.d32 = 0 };
++	int i = 0;
++	gintsts_data_t gintsts;
++	pcgcctl_data_t power = {.d32 = 0 };
++
++	power.d32 = DWC_READ_REG32(core_if->pcgcctl);
++	if (power.b.stoppclk) {
++		power.d32 = 0;
++		power.b.stoppclk = 1;
++		DWC_MODIFY_REG32(core_if->pcgcctl, power.d32, 0);
++
++		power.b.pwrclmp = 1;
++		DWC_MODIFY_REG32(core_if->pcgcctl, power.d32, 0);
++
++		power.b.rstpdwnmodule = 1;
++		DWC_MODIFY_REG32(core_if->pcgcctl, power.d32, 0);
++	}
++
++	core_if->lx_state = DWC_OTG_L0;
++
++	DWC_PRINTF("USB RESET\n");
++#ifdef DWC_EN_ISOC
++	for (i = 1; i < 16; ++i) {
++		dwc_otg_pcd_ep_t *ep;
++		dwc_ep_t *dwc_ep;
++		ep = get_in_ep(pcd, i);
++		if (ep != 0) {
++			dwc_ep = &ep->dwc_ep;
++			dwc_ep->next_frame = 0xffffffff;
++		}
++	}
++#endif /* DWC_EN_ISOC */
++
++	/* reset the HNP settings */
++	dwc_otg_pcd_update_otg(pcd, 1);
++
++	/* Clear the Remote Wakeup Signalling */
++	dctl.b.rmtwkupsig = 1;
++	DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0);
++
++	/* Set NAK for all OUT EPs */
++	doepctl.b.snak = 1;
++	for (i = 0; i <= dev_if->num_out_eps; i++) {
++		DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, doepctl.d32);
++	}
++
++	/* Flush the NP Tx FIFO */
++	dwc_otg_flush_tx_fifo(core_if, 0x10);
++	/* Flush the Learning Queue */
++	resetctl.b.intknqflsh = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32);
++
++	if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) {
++		core_if->start_predict = 0;
++		for (i = 0; i<= core_if->dev_if->num_in_eps; ++i) {
++			core_if->nextep_seq[i] = 0xff;	// 0xff - EP not active
++		}
++		core_if->nextep_seq[0] = 0;
++		core_if->first_in_nextep_seq = 0;
++		diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl);
++		diepctl.b.nextep = 0;
++		DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32);
++
++		/* Update IN Endpoint Mismatch Count by active IN NP EP count + 1 */
++		dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg);
++		dcfg.b.epmscnt = 2;
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
++
++		DWC_DEBUGPL(DBG_PCDV,
++			    "%s first_in_nextep_seq= %2d; nextep_seq[]:\n",
++			__func__, core_if->first_in_nextep_seq);
++		for (i=0; i <= core_if->dev_if->num_in_eps; i++) {
++			DWC_DEBUGPL(DBG_PCDV, "%2d\n", core_if->nextep_seq[i]);
++		}
++	}
++
++	if (core_if->multiproc_int_enable) {
++		daintmsk.b.inep0 = 1;
++		daintmsk.b.outep0 = 1;
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->deachintmsk,
++				daintmsk.d32);
++
++		doepmsk.b.setup = 1;
++		doepmsk.b.xfercompl = 1;
++		doepmsk.b.ahberr = 1;
++		doepmsk.b.epdisabled = 1;
++
++		if ((core_if->dma_desc_enable) ||
++		    (core_if->dma_enable
++		     && core_if->snpsid >= OTG_CORE_REV_3_00a)) {
++			doepmsk.b.stsphsercvd = 1;
++		}
++		if (core_if->dma_desc_enable)
++			doepmsk.b.bna = 1;
++/*
++		doepmsk.b.babble = 1;
++		doepmsk.b.nyet = 1;
++
++		if (core_if->dma_enable) {
++			doepmsk.b.nak = 1;
++		}
++*/
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->doepeachintmsk[0],
++				doepmsk.d32);
++
++		diepmsk.b.xfercompl = 1;
++		diepmsk.b.timeout = 1;
++		diepmsk.b.epdisabled = 1;
++		diepmsk.b.ahberr = 1;
++		diepmsk.b.intknepmis = 1;
++		if (!core_if->en_multiple_tx_fifo && core_if->dma_enable)
++			diepmsk.b.intknepmis = 0;
++
++/*		if (core_if->dma_desc_enable) {
++			diepmsk.b.bna = 1;
++		}
++*/
++/*
++		if (core_if->dma_enable) {
++			diepmsk.b.nak = 1;
++		}
++*/
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->diepeachintmsk[0],
++				diepmsk.d32);
++	} else {
++		daintmsk.b.inep0 = 1;
++		daintmsk.b.outep0 = 1;
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->daintmsk,
++				daintmsk.d32);
++
++		doepmsk.b.setup = 1;
++		doepmsk.b.xfercompl = 1;
++		doepmsk.b.ahberr = 1;
++		doepmsk.b.epdisabled = 1;
++
++		if ((core_if->dma_desc_enable) ||
++		    (core_if->dma_enable
++		     && core_if->snpsid >= OTG_CORE_REV_3_00a)) {
++			doepmsk.b.stsphsercvd = 1;
++		}
++		if (core_if->dma_desc_enable)
++			doepmsk.b.bna = 1;
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->doepmsk, doepmsk.d32);
++
++		diepmsk.b.xfercompl = 1;
++		diepmsk.b.timeout = 1;
++		diepmsk.b.epdisabled = 1;
++		diepmsk.b.ahberr = 1;
++		if (!core_if->en_multiple_tx_fifo && core_if->dma_enable)
++			diepmsk.b.intknepmis = 0;
++/*
++		if (core_if->dma_desc_enable) {
++			diepmsk.b.bna = 1;
++		}
++*/
++
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32);
++	}
++
++	/* Reset Device Address */
++	dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg);
++	dcfg.b.devaddr = 0;
++	DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
++
++	/* setup EP0 to receive SETUP packets */
++	if (core_if->snpsid <= OTG_CORE_REV_2_94a)
++		ep0_out_start(core_if, pcd);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.usbreset = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * Get the device speed from the device status register and convert it
++ * to USB speed constant.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static int get_device_speed(dwc_otg_core_if_t * core_if)
++{
++	dsts_data_t dsts;
++	int speed = 0;
++	dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
++
++	switch (dsts.b.enumspd) {
++	case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
++		speed = USB_SPEED_HIGH;
++		break;
++	case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
++	case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
++		speed = USB_SPEED_FULL;
++		break;
++
++	case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
++		speed = USB_SPEED_LOW;
++		break;
++	}
++
++	return speed;
++}
++
++/**
++ * Read the device status register and set the device speed in the
++ * data structure.
++ * Set up EP0 to receive SETUP packets by calling dwc_ep0_activate.
++ */
++int32_t dwc_otg_pcd_handle_enum_done_intr(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	gintsts_data_t gintsts;
++	gusbcfg_data_t gusbcfg;
++	dwc_otg_core_global_regs_t *global_regs =
++	    GET_CORE_IF(pcd)->core_global_regs;
++	uint8_t utmi16b, utmi8b;
++	int speed;
++	DWC_DEBUGPL(DBG_PCD, "SPEED ENUM\n");
++
++	if (GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_2_60a) {
++		utmi16b = 6;	//vahrama old value was 6;
++		utmi8b = 9;
++	} else {
++		utmi16b = 4;
++		utmi8b = 8;
++	}
++	dwc_otg_ep0_activate(GET_CORE_IF(pcd), &ep0->dwc_ep);
++	if (GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_3_00a) {
++		ep0_out_start(GET_CORE_IF(pcd), pcd);
++	}
++
++#ifdef DEBUG_EP0
++	print_ep0_state(pcd);
++#endif
++
++	if (pcd->ep0state == EP0_DISCONNECT) {
++		pcd->ep0state = EP0_IDLE;
++	} else if (pcd->ep0state == EP0_STALL) {
++		pcd->ep0state = EP0_IDLE;
++	}
++
++	pcd->ep0state = EP0_IDLE;
++
++	ep0->stopped = 0;
++
++	speed = get_device_speed(GET_CORE_IF(pcd));
++	pcd->fops->connect(pcd, speed);
++
++	/* Set USB turnaround time based on device speed and PHY interface. */
++	gusbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
++	if (speed == USB_SPEED_HIGH) {
++		if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type ==
++		    DWC_HWCFG2_HS_PHY_TYPE_ULPI) {
++			/* ULPI interface */
++			gusbcfg.b.usbtrdtim = 9;
++		}
++		if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type ==
++		    DWC_HWCFG2_HS_PHY_TYPE_UTMI) {
++			/* UTMI+ interface */
++			if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 0) {
++				gusbcfg.b.usbtrdtim = utmi8b;
++			} else if (GET_CORE_IF(pcd)->hwcfg4.
++				   b.utmi_phy_data_width == 1) {
++				gusbcfg.b.usbtrdtim = utmi16b;
++			} else if (GET_CORE_IF(pcd)->
++				   core_params->phy_utmi_width == 8) {
++				gusbcfg.b.usbtrdtim = utmi8b;
++			} else {
++				gusbcfg.b.usbtrdtim = utmi16b;
++			}
++		}
++		if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type ==
++		    DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI) {
++			/* UTMI+  OR  ULPI interface */
++			if (gusbcfg.b.ulpi_utmi_sel == 1) {
++				/* ULPI interface */
++				gusbcfg.b.usbtrdtim = 9;
++			} else {
++				/* UTMI+ interface */
++				if (GET_CORE_IF(pcd)->
++				    core_params->phy_utmi_width == 16) {
++					gusbcfg.b.usbtrdtim = utmi16b;
++				} else {
++					gusbcfg.b.usbtrdtim = utmi8b;
++				}
++			}
++		}
++	} else {
++		/* Full or low speed */
++		gusbcfg.b.usbtrdtim = 9;
++	}
++	DWC_WRITE_REG32(&global_regs->gusbcfg, gusbcfg.d32);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.enumdone = 1;
++	DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			gintsts.d32);
++	return 1;
++}
++
++/**
++ * This interrupt indicates that the ISO OUT Packet was dropped due to
++ * Rx FIFO full or Rx Status Queue Full.  If this interrupt occurs
++ * read all the data from the Rx FIFO.
++ */
++int32_t dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(dwc_otg_pcd_t * pcd)
++{
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	gintsts_data_t gintsts;
++
++	DWC_WARN("INTERRUPT Handler not implemented for %s\n",
++		 "ISOC Out Dropped");
++
++	intr_mask.b.isooutdrop = 1;
++	DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++			 intr_mask.d32, 0);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.isooutdrop = 1;
++	DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates the end of the portion of the micro-frame
++ * for periodic transactions.  If there is a periodic transaction for
++ * the next frame, load the packets into the EP periodic Tx FIFO.
++ */
++int32_t dwc_otg_pcd_handle_end_periodic_frame_intr(dwc_otg_pcd_t * pcd)
++{
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	gintsts_data_t gintsts;
++	DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "EOP");
++
++	intr_mask.b.eopframe = 1;
++	DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++			 intr_mask.d32, 0);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.eopframe = 1;
++	DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates that EP of the packet on the top of the
++ * non-periodic Tx FIFO does not match EP of the IN Token received.
++ *
++ * The "Device IN Token Queue" Registers are read to determine the
++ * order the IN Tokens have been received. The non-periodic Tx FIFO
++ * is flushed, so it can be reloaded in the order seen in the IN Token
++ * Queue.
++ */
++int32_t dwc_otg_pcd_handle_ep_mismatch_intr(dwc_otg_pcd_t * pcd)
++{
++	gintsts_data_t gintsts;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dctl_data_t dctl;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	if (!core_if->en_multiple_tx_fifo && core_if->dma_enable) {
++		core_if->start_predict = 1;
++
++		DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if);
++
++		gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++		if (!gintsts.b.ginnakeff) {
++			/* Disable EP Mismatch interrupt */
++			intr_mask.d32 = 0;
++			intr_mask.b.epmismatch = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, intr_mask.d32, 0);
++			/* Enable the Global IN NAK Effective Interrupt */
++			intr_mask.d32 = 0;
++			intr_mask.b.ginnakeff = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, intr_mask.d32);
++			/* Set the global non-periodic IN NAK handshake */
++			dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl);
++			dctl.b.sgnpinnak = 1;
++			DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32);
++		} else {
++			DWC_PRINTF("gintsts.b.ginnakeff = 1! dctl.b.sgnpinnak not set\n");
++		}
++		/* Disabling of all EP's will be done in dwc_otg_pcd_handle_in_nak_effective()
++		 * handler after Global IN NAK Effective interrupt will be asserted */
++	}
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.epmismatch = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This interrupt is valid only in DMA mode. This interrupt indicates that the
++ * core has stopped fetching data for IN endpoints due to the unavailability of
++ * TxFIFO space or Request Queue space. This interrupt is used by the
++ * application for an endpoint mismatch algorithm.
++ *
++ * @param pcd The PCD
++ */
++int32_t dwc_otg_pcd_handle_ep_fetsusp_intr(dwc_otg_pcd_t * pcd)
++{
++	gintsts_data_t gintsts;
++	gintmsk_data_t gintmsk_data;
++	dctl_data_t dctl;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if);
++
++	/* Clear the global non-periodic IN NAK handshake */
++	dctl.d32 = 0;
++	dctl.b.cgnpinnak = 1;
++	DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
++
++	/* Mask GINTSTS.FETSUSP interrupt */
++	gintmsk_data.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk);
++	gintmsk_data.b.fetsusp = 0;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk_data.d32);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.fetsusp = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++/**
++ * This funcion stalls EP0.
++ */
++static inline void ep0_do_stall(dwc_otg_pcd_t * pcd, const int err_val)
++{
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	usb_device_request_t *ctrl = &pcd->setup_pkt->req;
++	DWC_WARN("req %02x.%02x protocol STALL; err %d\n",
++		 ctrl->bmRequestType, ctrl->bRequest, err_val);
++
++	ep0->dwc_ep.is_in = 1;
++	dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep0->dwc_ep);
++	pcd->ep0.stopped = 1;
++	pcd->ep0state = EP0_IDLE;
++	ep0_out_start(GET_CORE_IF(pcd), pcd);
++}
++
++/**
++ * This functions delegates the setup command to the gadget driver.
++ */
++static inline void do_gadget_setup(dwc_otg_pcd_t * pcd,
++				   usb_device_request_t * ctrl)
++{
++	int ret = 0;
++	DWC_SPINUNLOCK(pcd->lock);
++	ret = pcd->fops->setup(pcd, (uint8_t *) ctrl);
++	DWC_SPINLOCK(pcd->lock);
++	if (ret < 0) {
++		ep0_do_stall(pcd, ret);
++	}
++
++	/** @todo This is a g_file_storage gadget driver specific
++	 * workaround: a DELAYED_STATUS result from the fsg_setup
++	 * routine will result in the gadget queueing a EP0 IN status
++	 * phase for a two-stage control transfer. Exactly the same as
++	 * a SET_CONFIGURATION/SET_INTERFACE except that this is a class
++	 * specific request.  Need a generic way to know when the gadget
++	 * driver will queue the status phase. Can we assume when we
++	 * call the gadget driver setup() function that it will always
++	 * queue and require the following flag? Need to look into
++	 * this.
++	 */
++
++	if (ret == 256 + 999) {
++		pcd->request_config = 1;
++	}
++}
++
++#ifdef DWC_UTE_CFI
++/**
++ * This functions delegates the CFI setup commands to the gadget driver.
++ * This function will return a negative value to indicate a failure.
++ */
++static inline int cfi_gadget_setup(dwc_otg_pcd_t * pcd,
++				   struct cfi_usb_ctrlrequest *ctrl_req)
++{
++	int ret = 0;
++
++	if (pcd->fops && pcd->fops->cfi_setup) {
++		DWC_SPINUNLOCK(pcd->lock);
++		ret = pcd->fops->cfi_setup(pcd, ctrl_req);
++		DWC_SPINLOCK(pcd->lock);
++		if (ret < 0) {
++			ep0_do_stall(pcd, ret);
++			return ret;
++		}
++	}
++
++	return ret;
++}
++#endif
++
++/**
++ * This function starts the Zero-Length Packet for the IN status phase
++ * of a 2 stage control transfer.
++ */
++static inline void do_setup_in_status_phase(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	if (pcd->ep0state == EP0_STALL) {
++		return;
++	}
++
++	pcd->ep0state = EP0_IN_STATUS_PHASE;
++
++	/* Prepare for more SETUP Packets */
++	DWC_DEBUGPL(DBG_PCD, "EP0 IN ZLP\n");
++	if ((GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_3_00a)
++	    && (pcd->core_if->dma_desc_enable)
++	    && (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len)) {
++		DWC_DEBUGPL(DBG_PCDV,
++			    "Data terminated wait next packet in out_desc_addr\n");
++		pcd->backup_buf = phys_to_virt(ep0->dwc_ep.dma_addr);
++		pcd->data_terminated = 1;
++	}
++	ep0->dwc_ep.xfer_len = 0;
++	ep0->dwc_ep.xfer_count = 0;
++	ep0->dwc_ep.is_in = 1;
++	ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle;
++	dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
++
++	/* Prepare for more SETUP Packets */
++	//ep0_out_start(GET_CORE_IF(pcd), pcd);
++}
++
++/**
++ * This function starts the Zero-Length Packet for the OUT status phase
++ * of a 2 stage control transfer.
++ */
++static inline void do_setup_out_status_phase(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	if (pcd->ep0state == EP0_STALL) {
++		DWC_DEBUGPL(DBG_PCD, "EP0 STALLED\n");
++		return;
++	}
++	pcd->ep0state = EP0_OUT_STATUS_PHASE;
++
++	DWC_DEBUGPL(DBG_PCD, "EP0 OUT ZLP\n");
++	ep0->dwc_ep.xfer_len = 0;
++	ep0->dwc_ep.xfer_count = 0;
++	ep0->dwc_ep.is_in = 0;
++	ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle;
++	dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
++
++	/* Prepare for more SETUP Packets */
++	if (GET_CORE_IF(pcd)->dma_enable == 0) {
++		ep0_out_start(GET_CORE_IF(pcd), pcd);
++	}
++}
++
++/**
++ * Clear the EP halt (STALL) and if pending requests start the
++ * transfer.
++ */
++static inline void pcd_clear_halt(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep)
++{
++	if (ep->dwc_ep.stall_clear_flag == 0)
++		dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep);
++
++	/* Reactive the EP */
++	dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep);
++	if (ep->stopped) {
++		ep->stopped = 0;
++		/* If there is a request in the EP queue start it */
++
++		/** @todo FIXME: this causes an EP mismatch in DMA mode.
++		 * epmismatch not yet implemented. */
++
++		/*
++		 * Above fixme is solved by implmenting a tasklet to call the
++		 * start_next_request(), outside of interrupt context at some
++		 * time after the current time, after a clear-halt setup packet.
++		 * Still need to implement ep mismatch in the future if a gadget
++		 * ever uses more than one endpoint at once
++		 */
++		ep->queue_sof = 1;
++		DWC_TASK_SCHEDULE(pcd->start_xfer_tasklet);
++	}
++	/* Start Control Status Phase */
++	do_setup_in_status_phase(pcd);
++}
++
++/**
++ * This function is called when the SET_FEATURE TEST_MODE Setup packet
++ * is sent from the host.  The Device Control register is written with
++ * the Test Mode bits set to the specified Test Mode.  This is done as
++ * a tasklet so that the "Status" phase of the control transfer
++ * completes before transmitting the TEST packets.
++ *
++ * @todo This has not been tested since the tasklet struct was put
++ * into the PCD struct!
++ *
++ */
++void do_test_mode(void *data)
++{
++	dctl_data_t dctl;
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) data;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	int test_mode = pcd->test_mode;
++
++//        DWC_WARN("%s() has not been tested since being rewritten!\n", __func__);
++
++	dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl);
++	switch (test_mode) {
++	case 1:		// TEST_J
++		dctl.b.tstctl = 1;
++		break;
++
++	case 2:		// TEST_K
++		dctl.b.tstctl = 2;
++		break;
++
++	case 3:		// TEST_SE0_NAK
++		dctl.b.tstctl = 3;
++		break;
++
++	case 4:		// TEST_PACKET
++		dctl.b.tstctl = 4;
++		break;
++
++	case 5:		// TEST_FORCE_ENABLE
++		dctl.b.tstctl = 5;
++		break;
++	}
++	DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32);
++}
++
++/**
++ * This function process the GET_STATUS Setup Commands.
++ */
++static inline void do_get_status(dwc_otg_pcd_t * pcd)
++{
++	usb_device_request_t ctrl = pcd->setup_pkt->req;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	uint16_t *status = pcd->status_buf;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++
++#ifdef DEBUG_EP0
++	DWC_DEBUGPL(DBG_PCD,
++		    "GET_STATUS %02x.%02x v%04x i%04x l%04x\n",
++		    ctrl.bmRequestType, ctrl.bRequest,
++		    UGETW(ctrl.wValue), UGETW(ctrl.wIndex),
++		    UGETW(ctrl.wLength));
++#endif
++
++	switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) {
++	case UT_DEVICE:
++		if(UGETW(ctrl.wIndex) == 0xF000) { /* OTG Status selector */
++			DWC_PRINTF("wIndex - %d\n", UGETW(ctrl.wIndex));
++			DWC_PRINTF("OTG VERSION - %d\n", core_if->otg_ver);
++			DWC_PRINTF("OTG CAP - %d, %d\n",
++				   core_if->core_params->otg_cap,
++						DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE);
++			if (core_if->otg_ver == 1
++			    && core_if->core_params->otg_cap ==
++			    DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
++				uint8_t *otgsts = (uint8_t*)pcd->status_buf;
++				*otgsts = (core_if->otg_sts & 0x1);
++				pcd->ep0_pending = 1;
++				ep0->dwc_ep.start_xfer_buff =
++				    (uint8_t *) otgsts;
++				ep0->dwc_ep.xfer_buff = (uint8_t *) otgsts;
++				ep0->dwc_ep.dma_addr =
++				    pcd->status_buf_dma_handle;
++				ep0->dwc_ep.xfer_len = 1;
++				ep0->dwc_ep.xfer_count = 0;
++				ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len;
++				dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd),
++							   &ep0->dwc_ep);
++				return;
++			} else {
++				ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
++				return;
++			}
++			break;
++		} else {
++			*status = 0x1;	/* Self powered */
++			*status |= pcd->remote_wakeup_enable << 1;
++			break;
++		}
++	case UT_INTERFACE:
++		*status = 0;
++		break;
++
++	case UT_ENDPOINT:
++		ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex));
++		if (ep == 0 || UGETW(ctrl.wLength) > 2) {
++			ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
++			return;
++		}
++		/** @todo check for EP stall */
++		*status = ep->stopped;
++		break;
++	}
++	pcd->ep0_pending = 1;
++	ep0->dwc_ep.start_xfer_buff = (uint8_t *) status;
++	ep0->dwc_ep.xfer_buff = (uint8_t *) status;
++	ep0->dwc_ep.dma_addr = pcd->status_buf_dma_handle;
++	ep0->dwc_ep.xfer_len = 2;
++	ep0->dwc_ep.xfer_count = 0;
++	ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len;
++	dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
++}
++
++/**
++ * This function process the SET_FEATURE Setup Commands.
++ */
++static inline void do_set_feature(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	usb_device_request_t ctrl = pcd->setup_pkt->req;
++	dwc_otg_pcd_ep_t *ep = 0;
++	int32_t otg_cap_param = core_if->core_params->otg_cap;
++	gotgctl_data_t gotgctl = {.d32 = 0 };
++
++	DWC_DEBUGPL(DBG_PCD, "SET_FEATURE:%02x.%02x v%04x i%04x l%04x\n",
++		    ctrl.bmRequestType, ctrl.bRequest,
++		    UGETW(ctrl.wValue), UGETW(ctrl.wIndex),
++		    UGETW(ctrl.wLength));
++	DWC_DEBUGPL(DBG_PCD, "otg_cap=%d\n", otg_cap_param);
++
++	switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) {
++	case UT_DEVICE:
++		switch (UGETW(ctrl.wValue)) {
++		case UF_DEVICE_REMOTE_WAKEUP:
++			pcd->remote_wakeup_enable = 1;
++			break;
++
++		case UF_TEST_MODE:
++			/* Setup the Test Mode tasklet to do the Test
++			 * Packet generation after the SETUP Status
++			 * phase has completed. */
++
++			/** @todo This has not been tested since the
++			 * tasklet struct was put into the PCD
++			 * struct! */
++			pcd->test_mode = UGETW(ctrl.wIndex) >> 8;
++			DWC_TASK_SCHEDULE(pcd->test_mode_tasklet);
++			break;
++
++		case UF_DEVICE_B_HNP_ENABLE:
++			DWC_DEBUGPL(DBG_PCDV,
++				    "SET_FEATURE: USB_DEVICE_B_HNP_ENABLE\n");
++
++			/* dev may initiate HNP */
++			if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
++				pcd->b_hnp_enable = 1;
++				dwc_otg_pcd_update_otg(pcd, 0);
++				DWC_DEBUGPL(DBG_PCD, "Request B HNP\n");
++				/**@todo Is the gotgctl.devhnpen cleared
++				 * by a USB Reset? */
++				gotgctl.b.devhnpen = 1;
++				gotgctl.b.hnpreq = 1;
++				DWC_WRITE_REG32(&global_regs->gotgctl,
++						gotgctl.d32);
++			} else {
++				ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
++				return;
++			}
++			break;
++
++		case UF_DEVICE_A_HNP_SUPPORT:
++			/* RH port supports HNP */
++			DWC_DEBUGPL(DBG_PCDV,
++				    "SET_FEATURE: USB_DEVICE_A_HNP_SUPPORT\n");
++			if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
++				pcd->a_hnp_support = 1;
++				dwc_otg_pcd_update_otg(pcd, 0);
++			} else {
++				ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
++				return;
++			}
++			break;
++
++		case UF_DEVICE_A_ALT_HNP_SUPPORT:
++			/* other RH port does */
++			DWC_DEBUGPL(DBG_PCDV,
++				    "SET_FEATURE: USB_DEVICE_A_ALT_HNP_SUPPORT\n");
++			if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
++				pcd->a_alt_hnp_support = 1;
++				dwc_otg_pcd_update_otg(pcd, 0);
++			} else {
++				ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
++				return;
++			}
++			break;
++
++		default:
++			ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
++			return;
++
++		}
++		do_setup_in_status_phase(pcd);
++		break;
++
++	case UT_INTERFACE:
++		do_gadget_setup(pcd, &ctrl);
++		break;
++
++	case UT_ENDPOINT:
++		if (UGETW(ctrl.wValue) == UF_ENDPOINT_HALT) {
++			ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex));
++			if (ep == 0) {
++				ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
++				return;
++			}
++			ep->stopped = 1;
++			dwc_otg_ep_set_stall(core_if, &ep->dwc_ep);
++		}
++		do_setup_in_status_phase(pcd);
++		break;
++	}
++}
++
++/**
++ * This function process the CLEAR_FEATURE Setup Commands.
++ */
++static inline void do_clear_feature(dwc_otg_pcd_t * pcd)
++{
++	usb_device_request_t ctrl = pcd->setup_pkt->req;
++	dwc_otg_pcd_ep_t *ep = 0;
++
++	DWC_DEBUGPL(DBG_PCD,
++		    "CLEAR_FEATURE:%02x.%02x v%04x i%04x l%04x\n",
++		    ctrl.bmRequestType, ctrl.bRequest,
++		    UGETW(ctrl.wValue), UGETW(ctrl.wIndex),
++		    UGETW(ctrl.wLength));
++
++	switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) {
++	case UT_DEVICE:
++		switch (UGETW(ctrl.wValue)) {
++		case UF_DEVICE_REMOTE_WAKEUP:
++			pcd->remote_wakeup_enable = 0;
++			break;
++
++		case UF_TEST_MODE:
++			/** @todo Add CLEAR_FEATURE for TEST modes. */
++			break;
++
++		default:
++			ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
++			return;
++		}
++		do_setup_in_status_phase(pcd);
++		break;
++
++	case UT_ENDPOINT:
++		ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex));
++		if (ep == 0) {
++			ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
++			return;
++		}
++
++		pcd_clear_halt(pcd, ep);
++
++		break;
++	}
++}
++
++/**
++ * This function process the SET_ADDRESS Setup Commands.
++ */
++static inline void do_set_address(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
++	usb_device_request_t ctrl = pcd->setup_pkt->req;
++
++	if (ctrl.bmRequestType == UT_DEVICE) {
++		dcfg_data_t dcfg = {.d32 = 0 };
++
++#ifdef DEBUG_EP0
++//                      DWC_DEBUGPL(DBG_PCDV, "SET_ADDRESS:%d\n", ctrl.wValue);
++#endif
++		dcfg.b.devaddr = UGETW(ctrl.wValue);
++		DWC_MODIFY_REG32(&dev_if->dev_global_regs->dcfg, 0, dcfg.d32);
++		do_setup_in_status_phase(pcd);
++	}
++}
++
++/**
++ *	This function processes SETUP commands. In Linux, the USB Command
++ *	processing is done in two places - the first being the PCD and the
++ *	second in the Gadget Driver (for example, the File-Backed Storage
++ *	Gadget Driver).
++ *
++ * <table>
++ * <tr><td>Command	</td><td>Driver </td><td>Description</td></tr>
++ *
++ * <tr><td>GET_STATUS </td><td>PCD </td><td>Command is processed as
++ * defined in chapter 9 of the USB 2.0 Specification chapter 9
++ * </td></tr>
++ *
++ * <tr><td>CLEAR_FEATURE </td><td>PCD </td><td>The Device and Endpoint
++ * requests are the ENDPOINT_HALT feature is procesed, all others the
++ * interface requests are ignored.</td></tr>
++ *
++ * <tr><td>SET_FEATURE </td><td>PCD </td><td>The Device and Endpoint
++ * requests are processed by the PCD.  Interface requests are passed
++ * to the Gadget Driver.</td></tr>
++ *
++ * <tr><td>SET_ADDRESS </td><td>PCD </td><td>Program the DCFG reg,
++ * with device address received </td></tr>
++ *
++ * <tr><td>GET_DESCRIPTOR </td><td>Gadget Driver </td><td>Return the
++ * requested descriptor</td></tr>
++ *
++ * <tr><td>SET_DESCRIPTOR </td><td>Gadget Driver </td><td>Optional -
++ * not implemented by any of the existing Gadget Drivers.</td></tr>
++ *
++ * <tr><td>SET_CONFIGURATION </td><td>Gadget Driver </td><td>Disable
++ * all EPs and enable EPs for new configuration.</td></tr>
++ *
++ * <tr><td>GET_CONFIGURATION </td><td>Gadget Driver </td><td>Return
++ * the current configuration</td></tr>
++ *
++ * <tr><td>SET_INTERFACE </td><td>Gadget Driver </td><td>Disable all
++ * EPs and enable EPs for new configuration.</td></tr>
++ *
++ * <tr><td>GET_INTERFACE </td><td>Gadget Driver </td><td>Return the
++ * current interface.</td></tr>
++ *
++ * <tr><td>SYNC_FRAME </td><td>PCD </td><td>Display debug
++ * message.</td></tr>
++ * </table>
++ *
++ * When the SETUP Phase Done interrupt occurs, the PCD SETUP commands are
++ * processed by pcd_setup. Calling the Function Driver's setup function from
++ * pcd_setup processes the gadget SETUP commands.
++ */
++static inline void pcd_setup(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	usb_device_request_t ctrl = pcd->setup_pkt->req;
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++
++	deptsiz0_data_t doeptsize0 = {.d32 = 0 };
++
++#ifdef DWC_UTE_CFI
++	int retval = 0;
++	struct cfi_usb_ctrlrequest cfi_req;
++#endif
++
++	doeptsize0.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doeptsiz);
++
++	/** In BDMA more then 1 setup packet is not supported till 3.00a */
++	if (core_if->dma_enable && core_if->dma_desc_enable == 0
++	    && (doeptsize0.b.supcnt < 2)
++	    && (core_if->snpsid < OTG_CORE_REV_2_94a)) {
++		DWC_ERROR
++		    ("\n\n-----------	 CANNOT handle > 1 setup packet in DMA mode\n\n");
++	}
++	if ((core_if->snpsid >= OTG_CORE_REV_3_00a)
++	    && (core_if->dma_enable == 1) && (core_if->dma_desc_enable == 0)) {
++		ctrl =
++		    (pcd->setup_pkt +
++		     (3 - doeptsize0.b.supcnt - 1 +
++		      ep0->dwc_ep.stp_rollover))->req;
++	}
++#ifdef DEBUG_EP0
++	DWC_DEBUGPL(DBG_PCD, "SETUP %02x.%02x v%04x i%04x l%04x\n",
++		    ctrl.bmRequestType, ctrl.bRequest,
++		    UGETW(ctrl.wValue), UGETW(ctrl.wIndex),
++		    UGETW(ctrl.wLength));
++#endif
++
++	/* Clean up the request queue */
++	dwc_otg_request_nuke(ep0);
++	ep0->stopped = 0;
++
++	if (ctrl.bmRequestType & UE_DIR_IN) {
++		ep0->dwc_ep.is_in = 1;
++		pcd->ep0state = EP0_IN_DATA_PHASE;
++	} else {
++		ep0->dwc_ep.is_in = 0;
++		pcd->ep0state = EP0_OUT_DATA_PHASE;
++	}
++
++	if (UGETW(ctrl.wLength) == 0) {
++		ep0->dwc_ep.is_in = 1;
++		pcd->ep0state = EP0_IN_STATUS_PHASE;
++	}
++
++	if (UT_GET_TYPE(ctrl.bmRequestType) != UT_STANDARD) {
++
++#ifdef DWC_UTE_CFI
++		DWC_MEMCPY(&cfi_req, &ctrl, sizeof(usb_device_request_t));
++
++		//printk(KERN_ALERT "CFI: req_type=0x%02x; req=0x%02x\n",
++				ctrl.bRequestType, ctrl.bRequest);
++		if (UT_GET_TYPE(cfi_req.bRequestType) == UT_VENDOR) {
++			if (cfi_req.bRequest > 0xB0 && cfi_req.bRequest < 0xBF) {
++				retval = cfi_setup(pcd, &cfi_req);
++				if (retval < 0) {
++					ep0_do_stall(pcd, retval);
++					pcd->ep0_pending = 0;
++					return;
++				}
++
++				/* if need gadget setup then call it and check the retval */
++				if (pcd->cfi->need_gadget_att) {
++					retval =
++					    cfi_gadget_setup(pcd,
++							     &pcd->
++							     cfi->ctrl_req);
++					if (retval < 0) {
++						pcd->ep0_pending = 0;
++						return;
++					}
++				}
++
++				if (pcd->cfi->need_status_in_complete) {
++					do_setup_in_status_phase(pcd);
++				}
++				return;
++			}
++		}
++#endif
++
++		/* handle non-standard (class/vendor) requests in the gadget driver */
++		do_gadget_setup(pcd, &ctrl);
++		return;
++	}
++
++	/** @todo NGS: Handle bad setup packet? */
++
++///////////////////////////////////////////
++//// --- Standard Request handling --- ////
++
++	switch (ctrl.bRequest) {
++	case UR_GET_STATUS:
++		do_get_status(pcd);
++		break;
++
++	case UR_CLEAR_FEATURE:
++		do_clear_feature(pcd);
++		break;
++
++	case UR_SET_FEATURE:
++		do_set_feature(pcd);
++		break;
++
++	case UR_SET_ADDRESS:
++		do_set_address(pcd);
++		break;
++
++	case UR_SET_INTERFACE:
++	case UR_SET_CONFIG:
++//              _pcd->request_config = 1;       /* Configuration changed */
++		do_gadget_setup(pcd, &ctrl);
++		break;
++
++	case UR_SYNCH_FRAME:
++		do_gadget_setup(pcd, &ctrl);
++		break;
++
++	default:
++		/* Call the Gadget Driver's setup functions */
++		do_gadget_setup(pcd, &ctrl);
++		break;
++	}
++}
++
++/**
++ * This function completes the ep0 control transfer.
++ */
++static int32_t ep0_complete_request(dwc_otg_pcd_ep_t * ep)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	dwc_otg_dev_in_ep_regs_t *in_ep_regs =
++	    dev_if->in_ep_regs[ep->dwc_ep.num];
++#ifdef DEBUG_EP0
++	dwc_otg_dev_out_ep_regs_t *out_ep_regs =
++	    dev_if->out_ep_regs[ep->dwc_ep.num];
++#endif
++	deptsiz0_data_t deptsiz;
++	dev_dma_desc_sts_t desc_sts;
++	dwc_otg_pcd_request_t *req;
++	int is_last = 0;
++	dwc_otg_pcd_t *pcd = ep->pcd;
++
++#ifdef DWC_UTE_CFI
++	struct cfi_usb_ctrlrequest *ctrlreq;
++	int retval = -DWC_E_NOT_SUPPORTED;
++#endif
++
++        desc_sts.b.bytes = 0;
++
++	if (pcd->ep0_pending && DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++		if (ep->dwc_ep.is_in) {
++#ifdef DEBUG_EP0
++			DWC_DEBUGPL(DBG_PCDV, "Do setup OUT status phase\n");
++#endif
++			do_setup_out_status_phase(pcd);
++		} else {
++#ifdef DEBUG_EP0
++			DWC_DEBUGPL(DBG_PCDV, "Do setup IN status phase\n");
++#endif
++
++#ifdef DWC_UTE_CFI
++			ctrlreq = &pcd->cfi->ctrl_req;
++
++			if (UT_GET_TYPE(ctrlreq->bRequestType) == UT_VENDOR) {
++				if (ctrlreq->bRequest > 0xB0
++				    && ctrlreq->bRequest < 0xBF) {
++
++					/* Return if the PCD failed to handle the request */
++					if ((retval =
++					     pcd->cfi->ops.
++					     ctrl_write_complete(pcd->cfi,
++								 pcd)) < 0) {
++						CFI_INFO
++						    ("ERROR setting a new value in the PCD(%d)\n",
++						     retval);
++						ep0_do_stall(pcd, retval);
++						pcd->ep0_pending = 0;
++						return 0;
++					}
++
++					/* If the gadget needs to be notified on the request */
++					if (pcd->cfi->need_gadget_att == 1) {
++						//retval = do_gadget_setup(pcd, &pcd->cfi->ctrl_req);
++						retval =
++						    cfi_gadget_setup(pcd,
++								     &pcd->cfi->
++								     ctrl_req);
++
++						/* Return from the function if the gadget failed to process
++						 * the request properly - this should never happen !!!
++						 */
++						if (retval < 0) {
++							CFI_INFO
++							    ("ERROR setting a new value in the gadget(%d)\n",
++							     retval);
++							pcd->ep0_pending = 0;
++							return 0;
++						}
++					}
++
++					CFI_INFO("%s: RETVAL=%d\n", __func__,
++						 retval);
++					/* If we hit here then the PCD and the gadget has properly
++					 * handled the request - so send the ZLP IN to the host.
++					 */
++					/* @todo: MAS - decide whether we need to start the setup
++					 * stage based on the need_setup value of the cfi object
++					 */
++					do_setup_in_status_phase(pcd);
++					pcd->ep0_pending = 0;
++					return 1;
++				}
++			}
++#endif
++
++			do_setup_in_status_phase(pcd);
++		}
++		pcd->ep0_pending = 0;
++		return 1;
++	}
++
++	if (DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++		return 0;
++	}
++	req = DWC_CIRCLEQ_FIRST(&ep->queue);
++
++	if (pcd->ep0state == EP0_OUT_STATUS_PHASE
++	    || pcd->ep0state == EP0_IN_STATUS_PHASE) {
++		is_last = 1;
++	} else if (ep->dwc_ep.is_in) {
++		deptsiz.d32 = DWC_READ_REG32(&in_ep_regs->dieptsiz);
++		if (core_if->dma_desc_enable != 0)
++			desc_sts = dev_if->in_desc_addr->status;
++#ifdef DEBUG_EP0
++		DWC_DEBUGPL(DBG_PCDV, "%d len=%d  xfersize=%d pktcnt=%d\n",
++			    ep->dwc_ep.num, ep->dwc_ep.xfer_len,
++			    deptsiz.b.xfersize, deptsiz.b.pktcnt);
++#endif
++
++		if (((core_if->dma_desc_enable == 0)
++		     && (deptsiz.b.xfersize == 0))
++		    || ((core_if->dma_desc_enable != 0)
++			&& (desc_sts.b.bytes == 0))) {
++			req->actual = ep->dwc_ep.xfer_count;
++			/* Is a Zero Len Packet needed? */
++			if (req->sent_zlp) {
++#ifdef DEBUG_EP0
++				DWC_DEBUGPL(DBG_PCD, "Setup Rx ZLP\n");
++#endif
++				req->sent_zlp = 0;
++			}
++			do_setup_out_status_phase(pcd);
++		}
++	} else {
++		/* ep0-OUT */
++#ifdef DEBUG_EP0
++		deptsiz.d32 = DWC_READ_REG32(&out_ep_regs->doeptsiz);
++		DWC_DEBUGPL(DBG_PCDV, "%d len=%d xsize=%d pktcnt=%d\n",
++			    ep->dwc_ep.num, ep->dwc_ep.xfer_len,
++			    deptsiz.b.xfersize, deptsiz.b.pktcnt);
++#endif
++		req->actual = ep->dwc_ep.xfer_count;
++
++		/* Is a Zero Len Packet needed? */
++		if (req->sent_zlp) {
++#ifdef DEBUG_EP0
++			DWC_DEBUGPL(DBG_PCDV, "Setup Tx ZLP\n");
++#endif
++			req->sent_zlp = 0;
++		}
++		/* For older cores do setup in status phase in Slave/BDMA modes,
++		 * starting from 3.00 do that only in slave, and for DMA modes
++		 * just re-enable ep 0 OUT here*/
++		if (core_if->dma_enable == 0
++		    || (core_if->dma_desc_enable == 0
++			&& core_if->snpsid <= OTG_CORE_REV_2_94a)) {
++			do_setup_in_status_phase(pcd);
++		} else if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
++			DWC_DEBUGPL(DBG_PCDV,
++				    "Enable out ep before in status phase\n");
++			ep0_out_start(core_if, pcd);
++		}
++	}
++
++	/* Complete the request */
++	if (is_last) {
++		dwc_otg_request_done(ep, req, 0);
++		ep->dwc_ep.start_xfer_buff = 0;
++		ep->dwc_ep.xfer_buff = 0;
++		ep->dwc_ep.xfer_len = 0;
++		return 1;
++	}
++	return 0;
++}
++
++#ifdef DWC_UTE_CFI
++/**
++ * This function calculates traverses all the CFI DMA descriptors and
++ * and accumulates the bytes that are left to be transfered.
++ *
++ * @return The total bytes left to transfered, or a negative value as failure
++ */
++static inline int cfi_calc_desc_residue(dwc_otg_pcd_ep_t * ep)
++{
++	int32_t ret = 0;
++	int i;
++	struct dwc_otg_dma_desc *ddesc = NULL;
++	struct cfi_ep *cfiep;
++
++	/* See if the pcd_ep has its respective cfi_ep mapped */
++	cfiep = get_cfi_ep_by_pcd_ep(ep->pcd->cfi, ep);
++	if (!cfiep) {
++		CFI_INFO("%s: Failed to find ep\n", __func__);
++		return -1;
++	}
++
++	ddesc = ep->dwc_ep.descs;
++
++	for (i = 0; (i < cfiep->desc_count) && (i < MAX_DMA_DESCS_PER_EP); i++) {
++
++#if defined(PRINT_CFI_DMA_DESCS)
++		print_desc(ddesc, ep->ep.name, i);
++#endif
++		ret += ddesc->status.b.bytes;
++		ddesc++;
++	}
++
++	if (ret)
++		CFI_INFO("!!!!!!!!!! WARNING (%s) - residue=%d\n", __func__,
++			 ret);
++
++	return ret;
++}
++#endif
++
++/**
++ * This function completes the request for the EP. If there are
++ * additional requests for the EP in the queue they will be started.
++ */
++static void complete_ep(dwc_otg_pcd_ep_t * ep)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	dwc_otg_dev_in_ep_regs_t *in_ep_regs =
++	    dev_if->in_ep_regs[ep->dwc_ep.num];
++	deptsiz_data_t deptsiz;
++	dev_dma_desc_sts_t desc_sts;
++	dwc_otg_pcd_request_t *req = 0;
++	dwc_otg_dev_dma_desc_t *dma_desc;
++	uint32_t byte_count = 0;
++	int is_last = 0;
++	int i;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s() %d-%s\n", __func__, ep->dwc_ep.num,
++		    (ep->dwc_ep.is_in ? "IN" : "OUT"));
++
++	/* Get any pending requests */
++	if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++		req = DWC_CIRCLEQ_FIRST(&ep->queue);
++		if (!req) {
++			DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep);
++			return;
++		}
++	} else {
++		DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep);
++		return;
++	}
++
++	DWC_DEBUGPL(DBG_PCD, "Requests %d\n", ep->pcd->request_pending);
++
++	if (ep->dwc_ep.is_in) {
++		deptsiz.d32 = DWC_READ_REG32(&in_ep_regs->dieptsiz);
++
++		if (core_if->dma_enable) {
++			if (core_if->dma_desc_enable == 0) {
++				if (deptsiz.b.xfersize == 0
++				    && deptsiz.b.pktcnt == 0) {
++					byte_count =
++					    ep->dwc_ep.xfer_len -
++					    ep->dwc_ep.xfer_count;
++
++					ep->dwc_ep.xfer_buff += byte_count;
++					ep->dwc_ep.dma_addr += byte_count;
++					ep->dwc_ep.xfer_count += byte_count;
++
++					DWC_DEBUGPL(DBG_PCDV,
++						    "%d-%s len=%d  xfersize=%d pktcnt=%d\n",
++						    ep->dwc_ep.num,
++						    (ep->dwc_ep.
++						     is_in ? "IN" : "OUT"),
++						    ep->dwc_ep.xfer_len,
++						    deptsiz.b.xfersize,
++						    deptsiz.b.pktcnt);
++
++					if (ep->dwc_ep.xfer_len <
++					    ep->dwc_ep.total_len) {
++						dwc_otg_ep_start_transfer
++						    (core_if, &ep->dwc_ep);
++					} else if (ep->dwc_ep.sent_zlp) {
++						/*
++						 * This fragment of code should initiate 0
++						 * length transfer in case if it is queued
++						 * a transfer with size divisible to EPs max
++						 * packet size and with usb_request zero field
++						 * is set, which means that after data is transfered,
++						 * it is also should be transfered
++						 * a 0 length packet at the end. For Slave and
++						 * Buffer DMA modes in this case SW has
++						 * to initiate 2 transfers one with transfer size,
++						 * and the second with 0 size. For Descriptor
++						 * DMA mode SW is able to initiate a transfer,
++						 * which will handle all the packets including
++						 * the last  0 length.
++						 */
++						ep->dwc_ep.sent_zlp = 0;
++						dwc_otg_ep_start_zl_transfer
++						    (core_if, &ep->dwc_ep);
++					} else {
++						is_last = 1;
++					}
++				} else {
++					if (ep->dwc_ep.type ==
++					    DWC_OTG_EP_TYPE_ISOC) {
++						req->actual = 0;
++						dwc_otg_request_done(ep, req, 0);
++
++						ep->dwc_ep.start_xfer_buff = 0;
++						ep->dwc_ep.xfer_buff = 0;
++						ep->dwc_ep.xfer_len = 0;
++
++						/* If there is a request in the queue start it. */
++						start_next_request(ep);
++					} else
++						DWC_WARN
++						("Incomplete transfer (%d - %s [siz=%d pkt=%d])\n",
++						ep->dwc_ep.num,
++						(ep->dwc_ep.is_in ? "IN" : "OUT"),
++						deptsiz.b.xfersize,
++						deptsiz.b.pktcnt);
++				}
++			} else {
++				dma_desc = ep->dwc_ep.desc_addr;
++				byte_count = 0;
++				ep->dwc_ep.sent_zlp = 0;
++
++#ifdef DWC_UTE_CFI
++				CFI_INFO("%s: BUFFER_MODE=%d\n", __func__,
++					 ep->dwc_ep.buff_mode);
++				if (ep->dwc_ep.buff_mode != BM_STANDARD) {
++					int residue;
++
++					residue = cfi_calc_desc_residue(ep);
++					if (residue < 0)
++						return;
++
++					byte_count = residue;
++				} else {
++#endif
++					for (i = 0; i < ep->dwc_ep.desc_cnt;
++					     ++i) {
++					desc_sts = dma_desc->status;
++					byte_count += desc_sts.b.bytes;
++					dma_desc++;
++				}
++#ifdef DWC_UTE_CFI
++				}
++#endif
++				if (byte_count == 0) {
++					ep->dwc_ep.xfer_count =
++					    ep->dwc_ep.total_len;
++					is_last = 1;
++				} else {
++					DWC_WARN("Incomplete transfer\n");
++				}
++			}
++		} else {
++			if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) {
++				DWC_DEBUGPL(DBG_PCDV,
++					    "%d-%s len=%d  xfersize=%d pktcnt=%d\n",
++					    ep->dwc_ep.num,
++					    ep->dwc_ep.is_in ? "IN" : "OUT",
++					    ep->dwc_ep.xfer_len,
++					    deptsiz.b.xfersize,
++					    deptsiz.b.pktcnt);
++
++				/*      Check if the whole transfer was completed,
++				 *      if no, setup transfer for next portion of data
++				 */
++				if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
++					dwc_otg_ep_start_transfer(core_if,
++								  &ep->dwc_ep);
++				} else if (ep->dwc_ep.sent_zlp) {
++					/*
++					 * This fragment of code should initiate 0
++					 * length trasfer in case if it is queued
++					 * a trasfer with size divisible to EPs max
++					 * packet size and with usb_request zero field
++					 * is set, which means that after data is transfered,
++					 * it is also should be transfered
++					 * a 0 length packet at the end. For Slave and
++					 * Buffer DMA modes in this case SW has
++					 * to initiate 2 transfers one with transfer size,
++					 * and the second with 0 size. For Desriptor
++					 * DMA mode SW is able to initiate a transfer,
++					 * which will handle all the packets including
++					 * the last  0 legth.
++					 */
++					ep->dwc_ep.sent_zlp = 0;
++					dwc_otg_ep_start_zl_transfer(core_if,
++								     &ep->dwc_ep);
++				} else {
++					is_last = 1;
++				}
++			} else {
++				DWC_WARN
++				    ("Incomplete transfer (%d-%s [siz=%d pkt=%d])\n",
++				     ep->dwc_ep.num,
++				     (ep->dwc_ep.is_in ? "IN" : "OUT"),
++				     deptsiz.b.xfersize, deptsiz.b.pktcnt);
++			}
++		}
++	} else {
++		dwc_otg_dev_out_ep_regs_t *out_ep_regs =
++		    dev_if->out_ep_regs[ep->dwc_ep.num];
++		desc_sts.d32 = 0;
++		if (core_if->dma_enable) {
++			if (core_if->dma_desc_enable) {
++				dma_desc = ep->dwc_ep.desc_addr;
++				byte_count = 0;
++				ep->dwc_ep.sent_zlp = 0;
++
++#ifdef DWC_UTE_CFI
++				CFI_INFO("%s: BUFFER_MODE=%d\n", __func__,
++					 ep->dwc_ep.buff_mode);
++				if (ep->dwc_ep.buff_mode != BM_STANDARD) {
++					int residue;
++					residue = cfi_calc_desc_residue(ep);
++					if (residue < 0)
++						return;
++					byte_count = residue;
++				} else {
++#endif
++
++					for (i = 0; i < ep->dwc_ep.desc_cnt;
++					     ++i) {
++						desc_sts = dma_desc->status;
++						byte_count += desc_sts.b.bytes;
++						dma_desc++;
++					}
++
++#ifdef DWC_UTE_CFI
++				}
++#endif
++				/* Checking for interrupt Out transfers with not
++				 * dword aligned mps sizes
++				 */
++				if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_INTR &&
++							(ep->dwc_ep.maxpacket%4)) {
++					ep->dwc_ep.xfer_count =
++					    ep->dwc_ep.total_len - byte_count;
++					if ((ep->dwc_ep.xfer_len %
++					     ep->dwc_ep.maxpacket)
++					    && (ep->dwc_ep.xfer_len /
++						ep->dwc_ep.maxpacket <
++						MAX_DMA_DESC_CNT))
++						ep->dwc_ep.xfer_len -=
++						    (ep->dwc_ep.desc_cnt -
++						     1) * ep->dwc_ep.maxpacket +
++						    ep->dwc_ep.xfer_len %
++						    ep->dwc_ep.maxpacket;
++					else
++						ep->dwc_ep.xfer_len -=
++						    ep->dwc_ep.desc_cnt *
++						    ep->dwc_ep.maxpacket;
++					if (ep->dwc_ep.xfer_len > 0) {
++						dwc_otg_ep_start_transfer
++						    (core_if, &ep->dwc_ep);
++					} else {
++						is_last = 1;
++					}
++				} else {
++					ep->dwc_ep.xfer_count =
++					    ep->dwc_ep.total_len - byte_count +
++					    ((4 -
++					      (ep->dwc_ep.
++					       total_len & 0x3)) & 0x3);
++					is_last = 1;
++				}
++			} else {
++				deptsiz.d32 = 0;
++				deptsiz.d32 =
++				    DWC_READ_REG32(&out_ep_regs->doeptsiz);
++
++				byte_count = (ep->dwc_ep.xfer_len -
++					      ep->dwc_ep.xfer_count -
++					      deptsiz.b.xfersize);
++				ep->dwc_ep.xfer_buff += byte_count;
++				ep->dwc_ep.dma_addr += byte_count;
++				ep->dwc_ep.xfer_count += byte_count;
++
++				/*      Check if the whole transfer was completed,
++				 *      if no, setup transfer for next portion of data
++				 */
++				if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
++					dwc_otg_ep_start_transfer(core_if,
++								  &ep->dwc_ep);
++				} else if (ep->dwc_ep.sent_zlp) {
++					/*
++					 * This fragment of code should initiate 0
++					 * length trasfer in case if it is queued
++					 * a trasfer with size divisible to EPs max
++					 * packet size and with usb_request zero field
++					 * is set, which means that after data is transfered,
++					 * it is also should be transfered
++					 * a 0 length packet at the end. For Slave and
++					 * Buffer DMA modes in this case SW has
++					 * to initiate 2 transfers one with transfer size,
++					 * and the second with 0 size. For Desriptor
++					 * DMA mode SW is able to initiate a transfer,
++					 * which will handle all the packets including
++					 * the last  0 legth.
++					 */
++					ep->dwc_ep.sent_zlp = 0;
++					dwc_otg_ep_start_zl_transfer(core_if,
++								     &ep->dwc_ep);
++				} else {
++					is_last = 1;
++				}
++			}
++		} else {
++			/*      Check if the whole transfer was completed,
++			 *      if no, setup transfer for next portion of data
++			 */
++			if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
++				dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
++			} else if (ep->dwc_ep.sent_zlp) {
++				/*
++				 * This fragment of code should initiate 0
++				 * length transfer in case if it is queued
++				 * a transfer with size divisible to EPs max
++				 * packet size and with usb_request zero field
++				 * is set, which means that after data is transfered,
++				 * it is also should be transfered
++				 * a 0 length packet at the end. For Slave and
++				 * Buffer DMA modes in this case SW has
++				 * to initiate 2 transfers one with transfer size,
++				 * and the second with 0 size. For Descriptor
++				 * DMA mode SW is able to initiate a transfer,
++				 * which will handle all the packets including
++				 * the last  0 length.
++				 */
++				ep->dwc_ep.sent_zlp = 0;
++				dwc_otg_ep_start_zl_transfer(core_if,
++							     &ep->dwc_ep);
++			} else {
++				is_last = 1;
++			}
++		}
++
++		DWC_DEBUGPL(DBG_PCDV,
++			    "addr %p,	 %d-%s len=%d cnt=%d xsize=%d pktcnt=%d\n",
++			    &out_ep_regs->doeptsiz, ep->dwc_ep.num,
++			    ep->dwc_ep.is_in ? "IN" : "OUT",
++			    ep->dwc_ep.xfer_len, ep->dwc_ep.xfer_count,
++			    deptsiz.b.xfersize, deptsiz.b.pktcnt);
++	}
++
++	/* Complete the request */
++	if (is_last) {
++#ifdef DWC_UTE_CFI
++		if (ep->dwc_ep.buff_mode != BM_STANDARD) {
++			req->actual = ep->dwc_ep.cfi_req_len - byte_count;
++		} else {
++#endif
++			req->actual = ep->dwc_ep.xfer_count;
++#ifdef DWC_UTE_CFI
++		}
++#endif
++		if (req->dw_align_buf) {
++			if (!ep->dwc_ep.is_in) {
++				dwc_memcpy(req->buf, req->dw_align_buf, req->length);
++			}
++			DWC_DMA_FREE(req->length, req->dw_align_buf,
++				     req->dw_align_buf_dma);
++		}
++
++		dwc_otg_request_done(ep, req, 0);
++
++		ep->dwc_ep.start_xfer_buff = 0;
++		ep->dwc_ep.xfer_buff = 0;
++		ep->dwc_ep.xfer_len = 0;
++
++		/* If there is a request in the queue start it. */
++		start_next_request(ep);
++	}
++}
++
++#ifdef DWC_EN_ISOC
++
++/**
++ * This function BNA interrupt for Isochronous EPs
++ *
++ */
++static void dwc_otg_pcd_handle_iso_bna(dwc_otg_pcd_ep_t * ep)
++{
++	dwc_ep_t *dwc_ep = &ep->dwc_ep;
++	volatile uint32_t *addr;
++	depctl_data_t depctl = {.d32 = 0 };
++	dwc_otg_pcd_t *pcd = ep->pcd;
++	dwc_otg_dev_dma_desc_t *dma_desc;
++	int i;
++
++	dma_desc =
++	    dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * (dwc_ep->proc_buf_num);
++
++	if (dwc_ep->is_in) {
++		dev_dma_desc_sts_t sts = {.d32 = 0 };
++		for (i = 0; i < dwc_ep->desc_cnt; ++i, ++dma_desc) {
++			sts.d32 = dma_desc->status.d32;
++			sts.b_iso_in.bs = BS_HOST_READY;
++			dma_desc->status.d32 = sts.d32;
++		}
++	} else {
++		dev_dma_desc_sts_t sts = {.d32 = 0 };
++		for (i = 0; i < dwc_ep->desc_cnt; ++i, ++dma_desc) {
++			sts.d32 = dma_desc->status.d32;
++			sts.b_iso_out.bs = BS_HOST_READY;
++			dma_desc->status.d32 = sts.d32;
++		}
++	}
++
++	if (dwc_ep->is_in == 0) {
++		addr =
++		    &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep->
++							   num]->doepctl;
++	} else {
++		addr =
++		    &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
++	}
++	depctl.b.epena = 1;
++	DWC_MODIFY_REG32(addr, depctl.d32, depctl.d32);
++}
++
++/**
++ * This function sets latest iso packet information(non-PTI mode)
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++void set_current_pkt_info(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	deptsiz_data_t deptsiz = {.d32 = 0 };
++	dma_addr_t dma_addr;
++	uint32_t offset;
++
++	if (ep->proc_buf_num)
++		dma_addr = ep->dma_addr1;
++	else
++		dma_addr = ep->dma_addr0;
++
++	if (ep->is_in) {
++		deptsiz.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->
++				   in_ep_regs[ep->num]->dieptsiz);
++		offset = ep->data_per_frame;
++	} else {
++		deptsiz.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->
++				   out_ep_regs[ep->num]->doeptsiz);
++		offset =
++		    ep->data_per_frame +
++		    (0x4 & (0x4 - (ep->data_per_frame & 0x3)));
++	}
++
++	if (!deptsiz.b.xfersize) {
++		ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame;
++		ep->pkt_info[ep->cur_pkt].offset =
++		    ep->cur_pkt_dma_addr - dma_addr;
++		ep->pkt_info[ep->cur_pkt].status = 0;
++	} else {
++		ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame;
++		ep->pkt_info[ep->cur_pkt].offset =
++		    ep->cur_pkt_dma_addr - dma_addr;
++		ep->pkt_info[ep->cur_pkt].status = -DWC_E_NO_DATA;
++	}
++	ep->cur_pkt_addr += offset;
++	ep->cur_pkt_dma_addr += offset;
++	ep->cur_pkt++;
++}
++
++/**
++ * This function sets latest iso packet information(DDMA mode)
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dwc_ep The EP to start the transfer on.
++ *
++ */
++static void set_ddma_iso_pkts_info(dwc_otg_core_if_t * core_if,
++				   dwc_ep_t * dwc_ep)
++{
++	dwc_otg_dev_dma_desc_t *dma_desc;
++	dev_dma_desc_sts_t sts = {.d32 = 0 };
++	iso_pkt_info_t *iso_packet;
++	uint32_t data_per_desc;
++	uint32_t offset;
++	int i, j;
++
++	iso_packet = dwc_ep->pkt_info;
++
++	/** Reinit closed DMA Descriptors*/
++	/** ISO OUT EP */
++	if (dwc_ep->is_in == 0) {
++		dma_desc =
++		    dwc_ep->iso_desc_addr +
++		    dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
++		offset = 0;
++
++		for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm;
++		     i += dwc_ep->pkt_per_frm) {
++			for (j = 0; j < dwc_ep->pkt_per_frm; ++j) {
++				data_per_desc =
++				    ((j + 1) * dwc_ep->maxpacket >
++				     dwc_ep->
++				     data_per_frame) ? dwc_ep->data_per_frame -
++				    j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++				data_per_desc +=
++				    (data_per_desc % 4) ? (4 -
++							   data_per_desc %
++							   4) : 0;
++
++				sts.d32 = dma_desc->status.d32;
++
++				/* Write status in iso_packet_decsriptor  */
++				iso_packet->status =
++				    sts.b_iso_out.rxsts +
++				    (sts.b_iso_out.bs ^ BS_DMA_DONE);
++				if (iso_packet->status) {
++					iso_packet->status = -DWC_E_NO_DATA;
++				}
++
++				/* Received data length */
++				if (!sts.b_iso_out.rxbytes) {
++					iso_packet->length =
++					    data_per_desc -
++					    sts.b_iso_out.rxbytes;
++				} else {
++					iso_packet->length =
++					    data_per_desc -
++					    sts.b_iso_out.rxbytes + (4 -
++								     dwc_ep->data_per_frame
++								     % 4);
++				}
++
++				iso_packet->offset = offset;
++
++				offset += data_per_desc;
++				dma_desc++;
++				iso_packet++;
++			}
++		}
++
++		for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) {
++			data_per_desc =
++			    ((j + 1) * dwc_ep->maxpacket >
++			     dwc_ep->data_per_frame) ? dwc_ep->data_per_frame -
++			    j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++			data_per_desc +=
++			    (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0;
++
++			sts.d32 = dma_desc->status.d32;
++
++			/* Write status in iso_packet_decsriptor  */
++			iso_packet->status =
++			    sts.b_iso_out.rxsts +
++			    (sts.b_iso_out.bs ^ BS_DMA_DONE);
++			if (iso_packet->status) {
++				iso_packet->status = -DWC_E_NO_DATA;
++			}
++
++			/* Received data length */
++			iso_packet->length =
++			    dwc_ep->data_per_frame - sts.b_iso_out.rxbytes;
++
++			iso_packet->offset = offset;
++
++			offset += data_per_desc;
++			iso_packet++;
++			dma_desc++;
++		}
++
++		sts.d32 = dma_desc->status.d32;
++
++		/* Write status in iso_packet_decsriptor  */
++		iso_packet->status =
++		    sts.b_iso_out.rxsts + (sts.b_iso_out.bs ^ BS_DMA_DONE);
++		if (iso_packet->status) {
++			iso_packet->status = -DWC_E_NO_DATA;
++		}
++		/* Received data length */
++		if (!sts.b_iso_out.rxbytes) {
++			iso_packet->length =
++			    dwc_ep->data_per_frame - sts.b_iso_out.rxbytes;
++		} else {
++			iso_packet->length =
++			    dwc_ep->data_per_frame - sts.b_iso_out.rxbytes +
++			    (4 - dwc_ep->data_per_frame % 4);
++		}
++
++		iso_packet->offset = offset;
++	} else {
++/** ISO IN EP */
++
++		dma_desc =
++		    dwc_ep->iso_desc_addr +
++		    dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
++
++		for (i = 0; i < dwc_ep->desc_cnt - 1; i++) {
++			sts.d32 = dma_desc->status.d32;
++
++			/* Write status in iso packet descriptor */
++			iso_packet->status =
++			    sts.b_iso_in.txsts +
++			    (sts.b_iso_in.bs ^ BS_DMA_DONE);
++			if (iso_packet->status != 0) {
++				iso_packet->status = -DWC_E_NO_DATA;
++
++			}
++			/* Bytes has been transfered */
++			iso_packet->length =
++			    dwc_ep->data_per_frame - sts.b_iso_in.txbytes;
++
++			dma_desc++;
++			iso_packet++;
++		}
++
++		sts.d32 = dma_desc->status.d32;
++		while (sts.b_iso_in.bs == BS_DMA_BUSY) {
++			sts.d32 = dma_desc->status.d32;
++		}
++
++		/* Write status in iso packet descriptor ??? do be done with ERROR codes */
++		iso_packet->status =
++		    sts.b_iso_in.txsts + (sts.b_iso_in.bs ^ BS_DMA_DONE);
++		if (iso_packet->status != 0) {
++			iso_packet->status = -DWC_E_NO_DATA;
++		}
++
++		/* Bytes has been transfered */
++		iso_packet->length =
++		    dwc_ep->data_per_frame - sts.b_iso_in.txbytes;
++	}
++}
++
++/**
++ * This function reinitialize DMA Descriptors for Isochronous transfer
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dwc_ep The EP to start the transfer on.
++ *
++ */
++static void reinit_ddma_iso_xfer(dwc_otg_core_if_t * core_if, dwc_ep_t * dwc_ep)
++{
++	int i, j;
++	dwc_otg_dev_dma_desc_t *dma_desc;
++	dma_addr_t dma_ad;
++	volatile uint32_t *addr;
++	dev_dma_desc_sts_t sts = {.d32 = 0 };
++	uint32_t data_per_desc;
++
++	if (dwc_ep->is_in == 0) {
++		addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
++	} else {
++		addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
++	}
++
++	if (dwc_ep->proc_buf_num == 0) {
++		/** Buffer 0 descriptors setup */
++		dma_ad = dwc_ep->dma_addr0;
++	} else {
++		/** Buffer 1 descriptors setup */
++		dma_ad = dwc_ep->dma_addr1;
++	}
++
++	/** Reinit closed DMA Descriptors*/
++	/** ISO OUT EP */
++	if (dwc_ep->is_in == 0) {
++		dma_desc =
++		    dwc_ep->iso_desc_addr +
++		    dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
++
++		sts.b_iso_out.bs = BS_HOST_READY;
++		sts.b_iso_out.rxsts = 0;
++		sts.b_iso_out.l = 0;
++		sts.b_iso_out.sp = 0;
++		sts.b_iso_out.ioc = 0;
++		sts.b_iso_out.pid = 0;
++		sts.b_iso_out.framenum = 0;
++
++		for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm;
++		     i += dwc_ep->pkt_per_frm) {
++			for (j = 0; j < dwc_ep->pkt_per_frm; ++j) {
++				data_per_desc =
++				    ((j + 1) * dwc_ep->maxpacket >
++				     dwc_ep->
++				     data_per_frame) ? dwc_ep->data_per_frame -
++				    j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++				data_per_desc +=
++				    (data_per_desc % 4) ? (4 -
++							   data_per_desc %
++							   4) : 0;
++				sts.b_iso_out.rxbytes = data_per_desc;
++				dma_desc->buf = dma_ad;
++				dma_desc->status.d32 = sts.d32;
++
++				dma_ad += data_per_desc;
++				dma_desc++;
++			}
++		}
++
++		for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) {
++
++			data_per_desc =
++			    ((j + 1) * dwc_ep->maxpacket >
++			     dwc_ep->data_per_frame) ? dwc_ep->data_per_frame -
++			    j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++			data_per_desc +=
++			    (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0;
++			sts.b_iso_out.rxbytes = data_per_desc;
++
++			dma_desc->buf = dma_ad;
++			dma_desc->status.d32 = sts.d32;
++
++			dma_desc++;
++			dma_ad += data_per_desc;
++		}
++
++		sts.b_iso_out.ioc = 1;
++		sts.b_iso_out.l = dwc_ep->proc_buf_num;
++
++		data_per_desc =
++		    ((j + 1) * dwc_ep->maxpacket >
++		     dwc_ep->data_per_frame) ? dwc_ep->data_per_frame -
++		    j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++		data_per_desc +=
++		    (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0;
++		sts.b_iso_out.rxbytes = data_per_desc;
++
++		dma_desc->buf = dma_ad;
++		dma_desc->status.d32 = sts.d32;
++	} else {
++/** ISO IN EP */
++
++		dma_desc =
++		    dwc_ep->iso_desc_addr +
++		    dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
++
++		sts.b_iso_in.bs = BS_HOST_READY;
++		sts.b_iso_in.txsts = 0;
++		sts.b_iso_in.sp = 0;
++		sts.b_iso_in.ioc = 0;
++		sts.b_iso_in.pid = dwc_ep->pkt_per_frm;
++		sts.b_iso_in.framenum = dwc_ep->next_frame;
++		sts.b_iso_in.txbytes = dwc_ep->data_per_frame;
++		sts.b_iso_in.l = 0;
++
++		for (i = 0; i < dwc_ep->desc_cnt - 1; i++) {
++			dma_desc->buf = dma_ad;
++			dma_desc->status.d32 = sts.d32;
++
++			sts.b_iso_in.framenum += dwc_ep->bInterval;
++			dma_ad += dwc_ep->data_per_frame;
++			dma_desc++;
++		}
++
++		sts.b_iso_in.ioc = 1;
++		sts.b_iso_in.l = dwc_ep->proc_buf_num;
++
++		dma_desc->buf = dma_ad;
++		dma_desc->status.d32 = sts.d32;
++
++		dwc_ep->next_frame =
++		    sts.b_iso_in.framenum + dwc_ep->bInterval * 1;
++	}
++	dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
++}
++
++/**
++ * This function is to handle Iso EP transfer complete interrupt
++ * in case Iso out packet was dropped
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dwc_ep The EP for wihich transfer complete was asserted
++ *
++ */
++static uint32_t handle_iso_out_pkt_dropped(dwc_otg_core_if_t * core_if,
++					   dwc_ep_t * dwc_ep)
++{
++	uint32_t dma_addr;
++	uint32_t drp_pkt;
++	uint32_t drp_pkt_cnt;
++	deptsiz_data_t deptsiz = {.d32 = 0 };
++	depctl_data_t depctl = {.d32 = 0 };
++	int i;
++
++	deptsiz.d32 =
++	    DWC_READ_REG32(&core_if->dev_if->
++			   out_ep_regs[dwc_ep->num]->doeptsiz);
++
++	drp_pkt = dwc_ep->pkt_cnt - deptsiz.b.pktcnt;
++	drp_pkt_cnt = dwc_ep->pkt_per_frm - (drp_pkt % dwc_ep->pkt_per_frm);
++
++	/* Setting dropped packets status */
++	for (i = 0; i < drp_pkt_cnt; ++i) {
++		dwc_ep->pkt_info[drp_pkt].status = -DWC_E_NO_DATA;
++		drp_pkt++;
++		deptsiz.b.pktcnt--;
++	}
++
++	if (deptsiz.b.pktcnt > 0) {
++		deptsiz.b.xfersize =
++		    dwc_ep->xfer_len - (dwc_ep->pkt_cnt -
++					deptsiz.b.pktcnt) * dwc_ep->maxpacket;
++	} else {
++		deptsiz.b.xfersize = 0;
++		deptsiz.b.pktcnt = 0;
++	}
++
++	DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz,
++			deptsiz.d32);
++
++	if (deptsiz.b.pktcnt > 0) {
++		if (dwc_ep->proc_buf_num) {
++			dma_addr =
++			    dwc_ep->dma_addr1 + dwc_ep->xfer_len -
++			    deptsiz.b.xfersize;
++		} else {
++			dma_addr =
++			    dwc_ep->dma_addr0 + dwc_ep->xfer_len -
++			    deptsiz.b.xfersize;;
++		}
++
++		DWC_WRITE_REG32(&core_if->dev_if->
++				out_ep_regs[dwc_ep->num]->doepdma, dma_addr);
++
++		/** Re-enable endpoint, clear nak  */
++		depctl.d32 = 0;
++		depctl.b.epena = 1;
++		depctl.b.cnak = 1;
++
++		DWC_MODIFY_REG32(&core_if->dev_if->
++				 out_ep_regs[dwc_ep->num]->doepctl, depctl.d32,
++				 depctl.d32);
++		return 0;
++	} else {
++		return 1;
++	}
++}
++
++/**
++ * This function sets iso packets information(PTI mode)
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++static uint32_t set_iso_pkts_info(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	int i, j;
++	dma_addr_t dma_ad;
++	iso_pkt_info_t *packet_info = ep->pkt_info;
++	uint32_t offset;
++	uint32_t frame_data;
++	deptsiz_data_t deptsiz;
++
++	if (ep->proc_buf_num == 0) {
++		/** Buffer 0 descriptors setup */
++		dma_ad = ep->dma_addr0;
++	} else {
++		/** Buffer 1 descriptors setup */
++		dma_ad = ep->dma_addr1;
++	}
++
++	if (ep->is_in) {
++		deptsiz.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
++				   dieptsiz);
++	} else {
++		deptsiz.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->out_ep_regs[ep->num]->
++				   doeptsiz);
++	}
++
++	if (!deptsiz.b.xfersize) {
++		offset = 0;
++		for (i = 0; i < ep->pkt_cnt; i += ep->pkt_per_frm) {
++			frame_data = ep->data_per_frame;
++			for (j = 0; j < ep->pkt_per_frm; ++j) {
++
++				/* Packet status - is not set as initially
++				 * it is set to 0 and if packet was sent
++				 successfully, status field will remain 0*/
++
++				/* Bytes has been transfered */
++				packet_info->length =
++				    (ep->maxpacket <
++				     frame_data) ? ep->maxpacket : frame_data;
++
++				/* Received packet offset */
++				packet_info->offset = offset;
++				offset += packet_info->length;
++				frame_data -= packet_info->length;
++
++				packet_info++;
++			}
++		}
++		return 1;
++	} else {
++		/* This is a workaround for in case of Transfer Complete with
++		 * PktDrpSts interrupts merging - in this case Transfer complete
++		 * interrupt for Isoc Out Endpoint is asserted without PktDrpSts
++		 * set and with DOEPTSIZ register non zero. Investigations showed,
++		 * that this happens when Out packet is dropped, but because of
++		 * interrupts merging during first interrupt handling PktDrpSts
++		 * bit is cleared and for next merged interrupts it is not reset.
++		 * In this case SW hadles the interrupt as if PktDrpSts bit is set.
++		 */
++		if (ep->is_in) {
++			return 1;
++		} else {
++			return handle_iso_out_pkt_dropped(core_if, ep);
++		}
++	}
++}
++
++/**
++ * This function is to handle Iso EP transfer complete interrupt
++ *
++ * @param pcd The PCD
++ * @param ep The EP for which transfer complete was asserted
++ *
++ */
++static void complete_iso_ep(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
++	dwc_ep_t *dwc_ep = &ep->dwc_ep;
++	uint8_t is_last = 0;
++
++	if (ep->dwc_ep.next_frame == 0xffffffff) {
++		DWC_WARN("Next frame is not set!\n");
++		return;
++	}
++
++	if (core_if->dma_enable) {
++		if (core_if->dma_desc_enable) {
++			set_ddma_iso_pkts_info(core_if, dwc_ep);
++			reinit_ddma_iso_xfer(core_if, dwc_ep);
++			is_last = 1;
++		} else {
++			if (core_if->pti_enh_enable) {
++				if (set_iso_pkts_info(core_if, dwc_ep)) {
++					dwc_ep->proc_buf_num =
++					    (dwc_ep->proc_buf_num ^ 1) & 0x1;
++					dwc_otg_iso_ep_start_buf_transfer
++					    (core_if, dwc_ep);
++					is_last = 1;
++				}
++			} else {
++				set_current_pkt_info(core_if, dwc_ep);
++				if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
++					is_last = 1;
++					dwc_ep->cur_pkt = 0;
++					dwc_ep->proc_buf_num =
++					    (dwc_ep->proc_buf_num ^ 1) & 0x1;
++					if (dwc_ep->proc_buf_num) {
++						dwc_ep->cur_pkt_addr =
++						    dwc_ep->xfer_buff1;
++						dwc_ep->cur_pkt_dma_addr =
++						    dwc_ep->dma_addr1;
++					} else {
++						dwc_ep->cur_pkt_addr =
++						    dwc_ep->xfer_buff0;
++						dwc_ep->cur_pkt_dma_addr =
++						    dwc_ep->dma_addr0;
++					}
++
++				}
++				dwc_otg_iso_ep_start_frm_transfer(core_if,
++								  dwc_ep);
++			}
++		}
++	} else {
++		set_current_pkt_info(core_if, dwc_ep);
++		if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
++			is_last = 1;
++			dwc_ep->cur_pkt = 0;
++			dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
++			if (dwc_ep->proc_buf_num) {
++				dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
++				dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
++			} else {
++				dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
++				dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
++			}
++
++		}
++		dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep);
++	}
++	if (is_last)
++		dwc_otg_iso_buffer_done(pcd, ep, ep->iso_req_handle);
++}
++#endif /* DWC_EN_ISOC */
++
++/**
++ * This function handle BNA interrupt for Non Isochronous EPs
++ *
++ */
++static void dwc_otg_pcd_handle_noniso_bna(dwc_otg_pcd_ep_t * ep)
++{
++	dwc_ep_t *dwc_ep = &ep->dwc_ep;
++	volatile uint32_t *addr;
++	depctl_data_t depctl = {.d32 = 0 };
++	dwc_otg_pcd_t *pcd = ep->pcd;
++	dwc_otg_dev_dma_desc_t *dma_desc;
++	dev_dma_desc_sts_t sts = {.d32 = 0 };
++	dwc_otg_core_if_t *core_if = ep->pcd->core_if;
++	int i, start;
++
++	if (!dwc_ep->desc_cnt)
++		DWC_WARN("Ep%d %s Descriptor count = %d \n", dwc_ep->num,
++			 (dwc_ep->is_in ? "IN" : "OUT"), dwc_ep->desc_cnt);
++
++	if (core_if->core_params->cont_on_bna && !dwc_ep->is_in
++							&& dwc_ep->type != DWC_OTG_EP_TYPE_CONTROL) {
++		uint32_t doepdma;
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++			core_if->dev_if->out_ep_regs[dwc_ep->num];
++		doepdma = DWC_READ_REG32(&(out_regs->doepdma));
++		start = (doepdma - dwc_ep->dma_desc_addr)/sizeof(dwc_otg_dev_dma_desc_t);
++		dma_desc = &(dwc_ep->desc_addr[start]);
++	} else {
++		start = 0;
++		dma_desc = dwc_ep->desc_addr;
++	}
++
++
++	for (i = start; i < dwc_ep->desc_cnt; ++i, ++dma_desc) {
++		sts.d32 = dma_desc->status.d32;
++		sts.b.bs = BS_HOST_READY;
++		dma_desc->status.d32 = sts.d32;
++	}
++
++	if (dwc_ep->is_in == 0) {
++		addr =
++		    &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep->num]->
++		    doepctl;
++	} else {
++		addr =
++		    &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
++	}
++	depctl.b.epena = 1;
++	depctl.b.cnak = 1;
++	DWC_MODIFY_REG32(addr, 0, depctl.d32);
++}
++
++/**
++ * This function handles EP0 Control transfers.
++ *
++ * The state of the control transfers are tracked in
++ * <code>ep0state</code>.
++ */
++static void handle_ep0(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	dev_dma_desc_sts_t desc_sts;
++	deptsiz0_data_t deptsiz;
++	uint32_t byte_count;
++
++#ifdef DEBUG_EP0
++	DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__);
++	print_ep0_state(pcd);
++#endif
++
++//      DWC_PRINTF("HANDLE EP0\n");
++
++	switch (pcd->ep0state) {
++	case EP0_DISCONNECT:
++		break;
++
++	case EP0_IDLE:
++		pcd->request_config = 0;
++
++		pcd_setup(pcd);
++		break;
++
++	case EP0_IN_DATA_PHASE:
++#ifdef DEBUG_EP0
++		DWC_DEBUGPL(DBG_PCD, "DATA_IN EP%d-%s: type=%d, mps=%d\n",
++			    ep0->dwc_ep.num, (ep0->dwc_ep.is_in ? "IN" : "OUT"),
++			    ep0->dwc_ep.type, ep0->dwc_ep.maxpacket);
++#endif
++
++		if (core_if->dma_enable != 0) {
++			/*
++			 * For EP0 we can only program 1 packet at a time so we
++			 * need to do the make calculations after each complete.
++			 * Call write_packet to make the calculations, as in
++			 * slave mode, and use those values to determine if we
++			 * can complete.
++			 */
++			if (core_if->dma_desc_enable == 0) {
++				deptsiz.d32 =
++				    DWC_READ_REG32(&core_if->
++						   dev_if->in_ep_regs[0]->
++						   dieptsiz);
++				byte_count =
++				    ep0->dwc_ep.xfer_len - deptsiz.b.xfersize;
++			} else {
++				desc_sts =
++				    core_if->dev_if->in_desc_addr->status;
++				byte_count =
++				    ep0->dwc_ep.xfer_len - desc_sts.b.bytes;
++			}
++			ep0->dwc_ep.xfer_count += byte_count;
++			ep0->dwc_ep.xfer_buff += byte_count;
++			ep0->dwc_ep.dma_addr += byte_count;
++		}
++		if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) {
++			dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd),
++						      &ep0->dwc_ep);
++			DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
++		} else if (ep0->dwc_ep.sent_zlp) {
++			dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd),
++						      &ep0->dwc_ep);
++			ep0->dwc_ep.sent_zlp = 0;
++			DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER sent zlp\n");
++		} else {
++			ep0_complete_request(ep0);
++			DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n");
++		}
++		break;
++	case EP0_OUT_DATA_PHASE:
++#ifdef DEBUG_EP0
++		DWC_DEBUGPL(DBG_PCD, "DATA_OUT EP%d-%s: type=%d, mps=%d\n",
++			    ep0->dwc_ep.num, (ep0->dwc_ep.is_in ? "IN" : "OUT"),
++			    ep0->dwc_ep.type, ep0->dwc_ep.maxpacket);
++#endif
++		if (core_if->dma_enable != 0) {
++			if (core_if->dma_desc_enable == 0) {
++				deptsiz.d32 =
++				    DWC_READ_REG32(&core_if->
++						   dev_if->out_ep_regs[0]->
++						   doeptsiz);
++				byte_count =
++				    ep0->dwc_ep.maxpacket - deptsiz.b.xfersize;
++			} else {
++				desc_sts =
++				    core_if->dev_if->out_desc_addr->status;
++				byte_count =
++				    ep0->dwc_ep.maxpacket - desc_sts.b.bytes;
++			}
++			ep0->dwc_ep.xfer_count += byte_count;
++			ep0->dwc_ep.xfer_buff += byte_count;
++			ep0->dwc_ep.dma_addr += byte_count;
++		}
++		if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) {
++			dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd),
++						      &ep0->dwc_ep);
++			DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
++		} else if (ep0->dwc_ep.sent_zlp) {
++			dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd),
++						      &ep0->dwc_ep);
++			ep0->dwc_ep.sent_zlp = 0;
++			DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER sent zlp\n");
++		} else {
++			ep0_complete_request(ep0);
++			DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n");
++		}
++		break;
++
++	case EP0_IN_STATUS_PHASE:
++	case EP0_OUT_STATUS_PHASE:
++		DWC_DEBUGPL(DBG_PCD, "CASE: EP0_STATUS\n");
++		ep0_complete_request(ep0);
++		pcd->ep0state = EP0_IDLE;
++		ep0->stopped = 1;
++		ep0->dwc_ep.is_in = 0;	/* OUT for next SETUP */
++
++		/* Prepare for more SETUP Packets */
++		if (core_if->dma_enable) {
++			ep0_out_start(core_if, pcd);
++		}
++		break;
++
++	case EP0_STALL:
++		DWC_ERROR("EP0 STALLed, should not get here pcd_setup()\n");
++		break;
++	}
++#ifdef DEBUG_EP0
++	print_ep0_state(pcd);
++#endif
++}
++
++/**
++ * Restart transfer
++ */
++static void restart_transfer(dwc_otg_pcd_t * pcd, const uint32_t epnum)
++{
++	dwc_otg_core_if_t *core_if;
++	dwc_otg_dev_if_t *dev_if;
++	deptsiz_data_t dieptsiz = {.d32 = 0 };
++	dwc_otg_pcd_ep_t *ep;
++
++	ep = get_in_ep(pcd, epnum);
++
++#ifdef DWC_EN_ISOC
++	if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
++		return;
++	}
++#endif /* DWC_EN_ISOC  */
++
++	core_if = GET_CORE_IF(pcd);
++	dev_if = core_if->dev_if;
++
++	dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dieptsiz);
++
++	DWC_DEBUGPL(DBG_PCD, "xfer_buff=%p xfer_count=%0x xfer_len=%0x"
++		    " stopped=%d\n", ep->dwc_ep.xfer_buff,
++		    ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len, ep->stopped);
++	/*
++	 * If xfersize is 0 and pktcnt in not 0, resend the last packet.
++	 */
++	if (dieptsiz.b.pktcnt && dieptsiz.b.xfersize == 0 &&
++	    ep->dwc_ep.start_xfer_buff != 0) {
++		if (ep->dwc_ep.total_len <= ep->dwc_ep.maxpacket) {
++			ep->dwc_ep.xfer_count = 0;
++			ep->dwc_ep.xfer_buff = ep->dwc_ep.start_xfer_buff;
++			ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count;
++		} else {
++			ep->dwc_ep.xfer_count -= ep->dwc_ep.maxpacket;
++			/* convert packet size to dwords. */
++			ep->dwc_ep.xfer_buff -= ep->dwc_ep.maxpacket;
++			ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count;
++		}
++		ep->stopped = 0;
++		DWC_DEBUGPL(DBG_PCD, "xfer_buff=%p xfer_count=%0x "
++			    "xfer_len=%0x stopped=%d\n",
++			    ep->dwc_ep.xfer_buff,
++			    ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len,
++			    ep->stopped);
++		if (epnum == 0) {
++			dwc_otg_ep0_start_transfer(core_if, &ep->dwc_ep);
++		} else {
++			dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
++		}
++	}
++}
++
++/*
++ * This function create new nextep sequnce based on Learn Queue.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ */
++void predict_nextep_seq( dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_device_global_regs_t *dev_global_regs =
++	    core_if->dev_if->dev_global_regs;
++	const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth;
++	/* Number of Token Queue Registers */
++	const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8;
++	dtknq1_data_t dtknqr1;
++	uint32_t in_tkn_epnums[4];
++	uint8_t seqnum[MAX_EPS_CHANNELS];
++	uint8_t intkn_seq[TOKEN_Q_DEPTH];
++	grstctl_t resetctl = {.d32 = 0 };
++	uint8_t temp;
++	int ndx = 0;
++	int start = 0;
++	int end = 0;
++	int sort_done = 0;
++	int i = 0;
++	volatile uint32_t *addr = &dev_global_regs->dtknqr1;
++
++
++	DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH);
++
++	/* Read the DTKNQ Registers */
++	for (i = 0; i < DTKNQ_REG_CNT; i++) {
++		in_tkn_epnums[i] = DWC_READ_REG32(addr);
++		DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i + 1,
++			    in_tkn_epnums[i]);
++		if (addr == &dev_global_regs->dvbusdis) {
++			addr = &dev_global_regs->dtknqr3_dthrctl;
++		} else {
++			++addr;
++		}
++
++	}
++
++	/* Copy the DTKNQR1 data to the bit field. */
++	dtknqr1.d32 = in_tkn_epnums[0];
++	if (dtknqr1.b.wrap_bit) {
++		ndx = dtknqr1.b.intknwptr;
++		end = ndx -1;
++		if (end < 0)
++			end = TOKEN_Q_DEPTH -1;
++	} else {
++		ndx = 0;
++		end = dtknqr1.b.intknwptr -1;
++		if (end < 0)
++			end = 0;
++	}
++	start = ndx;
++
++	/* Fill seqnum[] by initial values: EP number + 31 */
++	for (i=0; i <= core_if->dev_if->num_in_eps; i++) {
++		seqnum[i] = i +31;
++	}
++
++	/* Fill intkn_seq[] from in_tkn_epnums[0] */
++	for (i=0; i < 6; i++)
++		intkn_seq[i] = (in_tkn_epnums[0] >> ((7-i) * 4)) & 0xf;
++
++	if (TOKEN_Q_DEPTH > 6) {
++		/* Fill intkn_seq[] from in_tkn_epnums[1] */
++		for (i=6; i < 14; i++)
++			intkn_seq[i] =
++			    (in_tkn_epnums[1] >> ((7 - (i - 6)) * 4)) & 0xf;
++	}
++
++	if (TOKEN_Q_DEPTH > 14) {
++		/* Fill intkn_seq[] from in_tkn_epnums[1] */
++		for (i=14; i < 22; i++)
++			intkn_seq[i] =
++			    (in_tkn_epnums[2] >> ((7 - (i - 14)) * 4)) & 0xf;
++	}
++
++	if (TOKEN_Q_DEPTH > 22) {
++		/* Fill intkn_seq[] from in_tkn_epnums[1] */
++		for (i=22; i < 30; i++)
++			intkn_seq[i] =
++			    (in_tkn_epnums[3] >> ((7 - (i - 22)) * 4)) & 0xf;
++	}
++
++	DWC_DEBUGPL(DBG_PCDV, "%s start=%d end=%d intkn_seq[]:\n", __func__,
++		    start, end);
++	for (i=0; i<TOKEN_Q_DEPTH; i++)
++		DWC_DEBUGPL(DBG_PCDV,"%d\n", intkn_seq[i]);
++
++	/* Update seqnum based on intkn_seq[] */
++	i = 0;
++	do {
++		seqnum[intkn_seq[ndx]] = i;
++		ndx++;
++		i++;
++		if (ndx == TOKEN_Q_DEPTH)
++			ndx = 0;
++	} while ( i < TOKEN_Q_DEPTH );
++
++	/* Mark non active EP's in seqnum[] by 0xff */
++	for (i=0; i<=core_if->dev_if->num_in_eps; i++) {
++		if (core_if->nextep_seq[i] == 0xff )
++			seqnum[i] = 0xff;
++	}
++
++	/* Sort seqnum[] */
++	sort_done = 0;
++	while (!sort_done) {
++		sort_done = 1;
++		for (i=0; i<core_if->dev_if->num_in_eps; i++) {
++			if (seqnum[i] > seqnum[i+1]) {
++				temp = seqnum[i];
++				seqnum[i] = seqnum[i+1];
++				seqnum[i+1] = temp;
++				sort_done = 0;
++			}
++		}
++	}
++
++	ndx = start + seqnum[0];
++	if (ndx >= TOKEN_Q_DEPTH)
++		ndx = ndx % TOKEN_Q_DEPTH;
++	core_if->first_in_nextep_seq = intkn_seq[ndx];
++
++	/* Update seqnum[] by EP numbers  */
++	for (i=0; i<=core_if->dev_if->num_in_eps; i++) {
++		ndx = start + i;
++		if (seqnum[i] < 31) {
++			ndx = start + seqnum[i];
++			if (ndx >= TOKEN_Q_DEPTH)
++				ndx = ndx % TOKEN_Q_DEPTH;
++			seqnum[i] = intkn_seq[ndx];
++		} else {
++			if (seqnum[i] < 0xff) {
++				seqnum[i] = seqnum[i] - 31;
++			} else {
++				break;
++			}
++		}
++	}
++
++	/* Update nextep_seq[] based on seqnum[] */
++	for (i=0; i<core_if->dev_if->num_in_eps; i++) {
++		if (seqnum[i] != 0xff) {
++			if (seqnum[i+1] != 0xff) {
++				core_if->nextep_seq[seqnum[i]] = seqnum[i+1];
++			} else {
++				core_if->nextep_seq[seqnum[i]] = core_if->first_in_nextep_seq;
++				break;
++			}
++		} else {
++			break;
++		}
++	}
++
++	DWC_DEBUGPL(DBG_PCDV, "%s first_in_nextep_seq= %2d; nextep_seq[]:\n",
++		__func__, core_if->first_in_nextep_seq);
++	for (i=0; i <= core_if->dev_if->num_in_eps; i++) {
++		DWC_DEBUGPL(DBG_PCDV,"%2d\n", core_if->nextep_seq[i]);
++	}
++
++	/* Flush the Learning Queue */
++	resetctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->grstctl);
++	resetctl.b.intknqflsh = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32);
++
++
++}
++
++/**
++ * handle the IN EP disable interrupt.
++ */
++static inline void handle_in_ep_disable_intr(dwc_otg_pcd_t * pcd,
++					     const uint32_t epnum)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	deptsiz_data_t dieptsiz = {.d32 = 0 };
++	dctl_data_t dctl = {.d32 = 0 };
++	dwc_otg_pcd_ep_t *ep;
++	dwc_ep_t *dwc_ep;
++	gintmsk_data_t gintmsk_data;
++	depctl_data_t depctl;
++	uint32_t diepdma;
++	uint32_t remain_to_transfer = 0;
++	uint8_t i;
++	uint32_t xfer_size;
++
++	ep = get_in_ep(pcd, epnum);
++	dwc_ep = &ep->dwc_ep;
++
++	if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++		dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num);
++		complete_ep(ep);
++		return;
++	}
++
++	DWC_DEBUGPL(DBG_PCD, "diepctl%d=%0x\n", epnum,
++		    DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl));
++	dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dieptsiz);
++	depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl);
++
++	DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n",
++		    dieptsiz.b.pktcnt, dieptsiz.b.xfersize);
++
++	if ((core_if->start_predict == 0) || (depctl.b.eptype & 1)) {
++		if (ep->stopped) {
++			if (core_if->en_multiple_tx_fifo)
++				/* Flush the Tx FIFO */
++				dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num);
++			/* Clear the Global IN NP NAK */
++			dctl.d32 = 0;
++			dctl.b.cgnpinnak = 1;
++			DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
++			/* Restart the transaction */
++			if (dieptsiz.b.pktcnt != 0 || dieptsiz.b.xfersize != 0) {
++				restart_transfer(pcd, epnum);
++			}
++		} else {
++			/* Restart the transaction */
++			if (dieptsiz.b.pktcnt != 0 || dieptsiz.b.xfersize != 0) {
++				restart_transfer(pcd, epnum);
++			}
++			DWC_DEBUGPL(DBG_ANY, "STOPPED!!!\n");
++		}
++		return;
++	}
++
++	if (core_if->start_predict > 2) {	// NP IN EP
++		core_if->start_predict--;
++		return;
++	}
++
++	core_if->start_predict--;
++
++	if (core_if->start_predict == 1) {	// All NP IN Ep's disabled now
++
++		predict_nextep_seq(core_if);
++
++		/* Update all active IN EP's NextEP field based of nextep_seq[] */
++		for ( i = 0; i <= core_if->dev_if->num_in_eps; i++) {
++			depctl.d32 =
++			    DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
++			if (core_if->nextep_seq[i] != 0xff) {	// Active NP IN EP
++				depctl.b.nextep = core_if->nextep_seq[i];
++				DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32);
++			}
++		}
++		/* Flush Shared NP TxFIFO */
++		dwc_otg_flush_tx_fifo(core_if, 0);
++		/* Rewind buffers */
++		if (!core_if->dma_desc_enable) {
++			i = core_if->first_in_nextep_seq;
++			do {
++				ep = get_in_ep(pcd, i);
++				dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->dieptsiz);
++				xfer_size = ep->dwc_ep.total_len - ep->dwc_ep.xfer_count;
++				if (xfer_size > ep->dwc_ep.maxxfer)
++					xfer_size = ep->dwc_ep.maxxfer;
++				depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
++				if (dieptsiz.b.pktcnt != 0) {
++					if (xfer_size == 0) {
++						remain_to_transfer = 0;
++					} else {
++						if ((xfer_size % ep->dwc_ep.maxpacket) == 0) {
++							remain_to_transfer =
++								dieptsiz.b.pktcnt * ep->dwc_ep.maxpacket;
++						} else {
++							remain_to_transfer = ((dieptsiz.b.pktcnt -1) * ep->dwc_ep.maxpacket)
++								+ (xfer_size % ep->dwc_ep.maxpacket);
++						}
++					}
++					diepdma = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepdma);
++					dieptsiz.b.xfersize = remain_to_transfer;
++					DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->dieptsiz, dieptsiz.d32);
++					diepdma = ep->dwc_ep.dma_addr + (xfer_size - remain_to_transfer);
++					DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepdma, diepdma);
++				}
++				i = core_if->nextep_seq[i];
++			} while (i != core_if->first_in_nextep_seq);
++		} else { // dma_desc_enable
++				DWC_PRINTF("%s Learning Queue not supported in DDMA\n", __func__);
++		}
++
++		/* Restart transfers in predicted sequences */
++		i = core_if->first_in_nextep_seq;
++		do {
++			dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->dieptsiz);
++			depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
++			if (dieptsiz.b.pktcnt != 0) {
++				depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
++				depctl.b.epena = 1;
++				depctl.b.cnak = 1;
++				DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32);
++			}
++			i = core_if->nextep_seq[i];
++		} while (i != core_if->first_in_nextep_seq);
++
++		/* Clear the global non-periodic IN NAK handshake */
++		dctl.d32 = 0;
++		dctl.b.cgnpinnak = 1;
++		DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
++
++		/* Unmask EP Mismatch interrupt */
++		gintmsk_data.d32 = 0;
++		gintmsk_data.b.epmismatch = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, gintmsk_data.d32);
++
++		core_if->start_predict = 0;
++
++	}
++}
++
++/**
++ * Handler for the IN EP timeout handshake interrupt.
++ */
++static inline void handle_in_ep_timeout_intr(dwc_otg_pcd_t * pcd,
++					     const uint32_t epnum)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++
++#ifdef DEBUG
++	deptsiz_data_t dieptsiz = {.d32 = 0 };
++	uint32_t num = 0;
++#endif
++	dctl_data_t dctl = {.d32 = 0 };
++	dwc_otg_pcd_ep_t *ep;
++
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	ep = get_in_ep(pcd, epnum);
++
++	/* Disable the NP Tx Fifo Empty Interrrupt */
++	if (!core_if->dma_enable) {
++		intr_mask.b.nptxfempty = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk,
++				 intr_mask.d32, 0);
++	}
++	/** @todo NGS Check EP type.
++	 * Implement for Periodic EPs */
++	/*
++	 * Non-periodic EP
++	 */
++	/* Enable the Global IN NAK Effective Interrupt */
++	intr_mask.b.ginnakeff = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, intr_mask.d32);
++
++	/* Set Global IN NAK */
++	dctl.b.sgnpinnak = 1;
++	DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
++
++	ep->stopped = 1;
++
++#ifdef DEBUG
++	dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[num]->dieptsiz);
++	DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n",
++		    dieptsiz.b.pktcnt, dieptsiz.b.xfersize);
++#endif
++
++#ifdef DISABLE_PERIODIC_EP
++	/*
++	 * Set the NAK bit for this EP to
++	 * start the disable process.
++	 */
++	diepctl.d32 = 0;
++	diepctl.b.snak = 1;
++	DWC_MODIFY_REG32(&dev_if->in_ep_regs[num]->diepctl, diepctl.d32,
++			 diepctl.d32);
++	ep->disabling = 1;
++	ep->stopped = 1;
++#endif
++}
++
++/**
++ * Handler for the IN EP NAK interrupt.
++ */
++static inline int32_t handle_in_ep_nak_intr(dwc_otg_pcd_t * pcd,
++					    const uint32_t epnum)
++{
++	/** @todo implement ISR */
++	dwc_otg_core_if_t *core_if;
++	diepmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "IN EP NAK");
++	core_if = GET_CORE_IF(pcd);
++	intr_mask.b.nak = 1;
++
++	if (core_if->multiproc_int_enable) {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
++				 diepeachintmsk[epnum], intr_mask.d32, 0);
++	} else {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->diepmsk,
++				 intr_mask.d32, 0);
++	}
++
++	return 1;
++}
++
++/**
++ * Handler for the OUT EP Babble interrupt.
++ */
++static inline int32_t handle_out_ep_babble_intr(dwc_otg_pcd_t * pcd,
++						const uint32_t epnum)
++{
++	/** @todo implement ISR */
++	dwc_otg_core_if_t *core_if;
++	doepmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_PRINTF("INTERRUPT Handler not implemented for %s\n",
++		   "OUT EP Babble");
++	core_if = GET_CORE_IF(pcd);
++	intr_mask.b.babble = 1;
++
++	if (core_if->multiproc_int_enable) {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
++				 doepeachintmsk[epnum], intr_mask.d32, 0);
++	} else {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk,
++				 intr_mask.d32, 0);
++	}
++
++	return 1;
++}
++
++/**
++ * Handler for the OUT EP NAK interrupt.
++ */
++static inline int32_t handle_out_ep_nak_intr(dwc_otg_pcd_t * pcd,
++					     const uint32_t epnum)
++{
++	/** @todo implement ISR */
++	dwc_otg_core_if_t *core_if;
++	doepmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_DEBUGPL(DBG_ANY, "INTERRUPT Handler not implemented for %s\n", "OUT EP NAK");
++	core_if = GET_CORE_IF(pcd);
++	intr_mask.b.nak = 1;
++
++	if (core_if->multiproc_int_enable) {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
++				 doepeachintmsk[epnum], intr_mask.d32, 0);
++	} else {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk,
++				 intr_mask.d32, 0);
++	}
++
++	return 1;
++}
++
++/**
++ * Handler for the OUT EP NYET interrupt.
++ */
++static inline int32_t handle_out_ep_nyet_intr(dwc_otg_pcd_t * pcd,
++					      const uint32_t epnum)
++{
++	/** @todo implement ISR */
++	dwc_otg_core_if_t *core_if;
++	doepmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "OUT EP NYET");
++	core_if = GET_CORE_IF(pcd);
++	intr_mask.b.nyet = 1;
++
++	if (core_if->multiproc_int_enable) {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
++				 doepeachintmsk[epnum], intr_mask.d32, 0);
++	} else {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk,
++				 intr_mask.d32, 0);
++	}
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates that an IN EP has a pending Interrupt.
++ * The sequence for handling the IN EP interrupt is shown below:
++ * -#	Read the Device All Endpoint Interrupt register
++ * -#	Repeat the following for each IN EP interrupt bit set (from
++ *		LSB to MSB).
++ * -#	Read the Device Endpoint Interrupt (DIEPINTn) register
++ * -#	If "Transfer Complete" call the request complete function
++ * -#	If "Endpoint Disabled" complete the EP disable procedure.
++ * -#	If "AHB Error Interrupt" log error
++ * -#	If "Time-out Handshake" log error
++ * -#	If "IN Token Received when TxFIFO Empty" write packet to Tx
++ *		FIFO.
++ * -#	If "IN Token EP Mismatch" (disable, this is handled by EP
++ *		Mismatch Interrupt)
++ */
++static int32_t dwc_otg_pcd_handle_in_ep_intr(dwc_otg_pcd_t * pcd)
++{
++#define CLEAR_IN_EP_INTR(__core_if,__epnum,__intr) \
++do { \
++		diepint_data_t diepint = {.d32=0}; \
++		diepint.b.__intr = 1; \
++		DWC_WRITE_REG32(&__core_if->dev_if->in_ep_regs[__epnum]->diepint, \
++		diepint.d32); \
++} while (0)
++
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	diepint_data_t diepint = {.d32 = 0 };
++	depctl_data_t depctl = {.d32 = 0 };
++	uint32_t ep_intr;
++	uint32_t epnum = 0;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_ep_t *dwc_ep;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd);
++
++	/* Read in the device interrupt bits */
++	ep_intr = dwc_otg_read_dev_all_in_ep_intr(core_if);
++
++	/* Service the Device IN interrupts for each endpoint */
++	while (ep_intr) {
++		if (ep_intr & 0x1) {
++			uint32_t empty_msk;
++			/* Get EP pointer */
++			ep = get_in_ep(pcd, epnum);
++			dwc_ep = &ep->dwc_ep;
++
++			depctl.d32 =
++			    DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl);
++			empty_msk =
++			    DWC_READ_REG32(&dev_if->
++					   dev_global_regs->dtknqr4_fifoemptymsk);
++
++			DWC_DEBUGPL(DBG_PCDV,
++				    "IN EP INTERRUPT - %d\nepmty_msk - %8x  diepctl - %8x\n",
++				    epnum, empty_msk, depctl.d32);
++
++			DWC_DEBUGPL(DBG_PCD,
++				    "EP%d-%s: type=%d, mps=%d\n",
++				    dwc_ep->num, (dwc_ep->is_in ? "IN" : "OUT"),
++				    dwc_ep->type, dwc_ep->maxpacket);
++
++			diepint.d32 =
++			    dwc_otg_read_dev_in_ep_intr(core_if, dwc_ep);
++
++			DWC_DEBUGPL(DBG_PCDV,
++				    "EP %d Interrupt Register - 0x%x\n", epnum,
++				    diepint.d32);
++			/* Transfer complete */
++			if (diepint.b.xfercompl) {
++				/* Disable the NP Tx FIFO Empty
++				 * Interrupt */
++				if (core_if->en_multiple_tx_fifo == 0) {
++					intr_mask.b.nptxfempty = 1;
++					DWC_MODIFY_REG32
++					    (&core_if->core_global_regs->gintmsk,
++					     intr_mask.d32, 0);
++				} else {
++					/* Disable the Tx FIFO Empty Interrupt for this EP */
++					uint32_t fifoemptymsk =
++					    0x1 << dwc_ep->num;
++					DWC_MODIFY_REG32(&core_if->
++							 dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++							 fifoemptymsk, 0);
++				}
++				/* Clear the bit in DIEPINTn for this interrupt */
++				CLEAR_IN_EP_INTR(core_if, epnum, xfercompl);
++
++				/* Complete the transfer */
++				if (epnum == 0) {
++					handle_ep0(pcd);
++				}
++#ifdef DWC_EN_ISOC
++				else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++					if (!ep->stopped)
++						complete_iso_ep(pcd, ep);
++				}
++#endif /* DWC_EN_ISOC */
++#ifdef DWC_UTE_PER_IO
++				else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++					if (!ep->stopped)
++						complete_xiso_ep(ep);
++				}
++#endif /* DWC_UTE_PER_IO */
++				else {
++					if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC &&
++							dwc_ep->bInterval > 1) {
++						dwc_ep->frame_num += dwc_ep->bInterval;
++						if (dwc_ep->frame_num > 0x3FFF)
++						{
++							dwc_ep->frm_overrun = 1;
++							dwc_ep->frame_num &= 0x3FFF;
++						} else
++							dwc_ep->frm_overrun = 0;
++					}
++					complete_ep(ep);
++					if(diepint.b.nak)
++						CLEAR_IN_EP_INTR(core_if, epnum, nak);
++				}
++			}
++			/* Endpoint disable      */
++			if (diepint.b.epdisabled) {
++				DWC_DEBUGPL(DBG_ANY, "EP%d IN disabled\n",
++					    epnum);
++				handle_in_ep_disable_intr(pcd, epnum);
++
++				/* Clear the bit in DIEPINTn for this interrupt */
++				CLEAR_IN_EP_INTR(core_if, epnum, epdisabled);
++			}
++			/* AHB Error */
++			if (diepint.b.ahberr) {
++				DWC_ERROR("EP%d IN AHB Error\n", epnum);
++				/* Clear the bit in DIEPINTn for this interrupt */
++				CLEAR_IN_EP_INTR(core_if, epnum, ahberr);
++			}
++			/* TimeOUT Handshake (non-ISOC IN EPs) */
++			if (diepint.b.timeout) {
++				DWC_ERROR("EP%d IN Time-out\n", epnum);
++				handle_in_ep_timeout_intr(pcd, epnum);
++
++				CLEAR_IN_EP_INTR(core_if, epnum, timeout);
++			}
++			/** IN Token received with TxF Empty */
++			if (diepint.b.intktxfemp) {
++				DWC_DEBUGPL(DBG_ANY,
++					    "EP%d IN TKN TxFifo Empty\n",
++					    epnum);
++				if (!ep->stopped && epnum != 0) {
++
++					diepmsk_data_t diepmsk = {.d32 = 0 };
++					diepmsk.b.intktxfemp = 1;
++
++					if (core_if->multiproc_int_enable) {
++						DWC_MODIFY_REG32
++						    (&dev_if->dev_global_regs->diepeachintmsk
++						     [epnum], diepmsk.d32, 0);
++					} else {
++						DWC_MODIFY_REG32
++						    (&dev_if->dev_global_regs->diepmsk,
++						     diepmsk.d32, 0);
++					}
++				} else if (core_if->dma_desc_enable
++					   && epnum == 0
++					   && pcd->ep0state ==
++					   EP0_OUT_STATUS_PHASE) {
++					// EP0 IN set STALL
++					depctl.d32 =
++					    DWC_READ_REG32(&dev_if->in_ep_regs
++							   [epnum]->diepctl);
++
++					/* set the disable and stall bits */
++					if (depctl.b.epena) {
++						depctl.b.epdis = 1;
++					}
++					depctl.b.stall = 1;
++					DWC_WRITE_REG32(&dev_if->in_ep_regs
++							[epnum]->diepctl,
++							depctl.d32);
++				}
++				CLEAR_IN_EP_INTR(core_if, epnum, intktxfemp);
++			}
++			/** IN Token Received with EP mismatch */
++			if (diepint.b.intknepmis) {
++				DWC_DEBUGPL(DBG_ANY,
++					    "EP%d IN TKN EP Mismatch\n", epnum);
++				CLEAR_IN_EP_INTR(core_if, epnum, intknepmis);
++			}
++			/** IN Endpoint NAK Effective */
++			if (diepint.b.inepnakeff) {
++				DWC_DEBUGPL(DBG_ANY,
++					    "EP%d IN EP NAK Effective\n",
++					    epnum);
++				/* Periodic EP */
++				if (ep->disabling) {
++					depctl.d32 = 0;
++					depctl.b.snak = 1;
++					depctl.b.epdis = 1;
++					DWC_MODIFY_REG32(&dev_if->in_ep_regs
++							 [epnum]->diepctl,
++							 depctl.d32,
++							 depctl.d32);
++				}
++				CLEAR_IN_EP_INTR(core_if, epnum, inepnakeff);
++
++			}
++
++			/** IN EP Tx FIFO Empty Intr */
++			if (diepint.b.emptyintr) {
++				DWC_DEBUGPL(DBG_ANY,
++					    "EP%d Tx FIFO Empty Intr \n",
++					    epnum);
++				write_empty_tx_fifo(pcd, epnum);
++
++				CLEAR_IN_EP_INTR(core_if, epnum, emptyintr);
++
++			}
++
++			/** IN EP BNA Intr */
++			if (diepint.b.bna) {
++				CLEAR_IN_EP_INTR(core_if, epnum, bna);
++				if (core_if->dma_desc_enable) {
++#ifdef DWC_EN_ISOC
++					if (dwc_ep->type ==
++					    DWC_OTG_EP_TYPE_ISOC) {
++						/*
++						 * This checking is performed to prevent first "false" BNA
++						 * handling occuring right after reconnect
++						 */
++						if (dwc_ep->next_frame !=
++						    0xffffffff)
++							dwc_otg_pcd_handle_iso_bna(ep);
++					} else
++#endif				/* DWC_EN_ISOC */
++					{
++						dwc_otg_pcd_handle_noniso_bna(ep);
++					}
++				}
++			}
++			/* NAK Interrutp */
++			if (diepint.b.nak) {
++				DWC_DEBUGPL(DBG_ANY, "EP%d IN NAK Interrupt\n",
++					    epnum);
++				if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
++					depctl_data_t depctl;
++					if (ep->dwc_ep.frame_num == 0xFFFFFFFF) {
++						ep->dwc_ep.frame_num = core_if->frame_num;
++						if (ep->dwc_ep.bInterval > 1) {
++							depctl.d32 = 0;
++							depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl);
++							if (ep->dwc_ep.frame_num & 0x1) {
++								depctl.b.setd1pid = 1;
++								depctl.b.setd0pid = 0;
++							} else {
++								depctl.b.setd0pid = 1;
++								depctl.b.setd1pid = 0;
++							}
++							DWC_WRITE_REG32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32);
++						}
++						start_next_request(ep);
++					}
++					ep->dwc_ep.frame_num += ep->dwc_ep.bInterval;
++					if (dwc_ep->frame_num > 0x3FFF)	{
++						dwc_ep->frm_overrun = 1;
++						dwc_ep->frame_num &= 0x3FFF;
++					} else
++						dwc_ep->frm_overrun = 0;
++				}
++
++				CLEAR_IN_EP_INTR(core_if, epnum, nak);
++			}
++		}
++		epnum++;
++		ep_intr >>= 1;
++	}
++
++	return 1;
++#undef CLEAR_IN_EP_INTR
++}
++
++/**
++ * This interrupt indicates that an OUT EP has a pending Interrupt.
++ * The sequence for handling the OUT EP interrupt is shown below:
++ * -#	Read the Device All Endpoint Interrupt register
++ * -#	Repeat the following for each OUT EP interrupt bit set (from
++ *		LSB to MSB).
++ * -#	Read the Device Endpoint Interrupt (DOEPINTn) register
++ * -#	If "Transfer Complete" call the request complete function
++ * -#	If "Endpoint Disabled" complete the EP disable procedure.
++ * -#	If "AHB Error Interrupt" log error
++ * -#	If "Setup Phase Done" process Setup Packet (See Standard USB
++ *		Command Processing)
++ */
++static int32_t dwc_otg_pcd_handle_out_ep_intr(dwc_otg_pcd_t * pcd)
++{
++#define CLEAR_OUT_EP_INTR(__core_if,__epnum,__intr) \
++do { \
++		doepint_data_t doepint = {.d32=0}; \
++		doepint.b.__intr = 1; \
++		DWC_WRITE_REG32(&__core_if->dev_if->out_ep_regs[__epnum]->doepint, \
++		doepint.d32); \
++} while (0)
++
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	uint32_t ep_intr;
++	doepint_data_t doepint = {.d32 = 0 };
++	uint32_t epnum = 0;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_ep_t *dwc_ep;
++	dctl_data_t dctl = {.d32 = 0 };
++	gintmsk_data_t gintmsk = {.d32 = 0 };
++
++
++	DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__);
++
++	/* Read in the device interrupt bits */
++	ep_intr = dwc_otg_read_dev_all_out_ep_intr(core_if);
++
++	while (ep_intr) {
++		if (ep_intr & 0x1) {
++			/* Get EP pointer */
++			ep = get_out_ep(pcd, epnum);
++			dwc_ep = &ep->dwc_ep;
++
++#ifdef VERBOSE
++			DWC_DEBUGPL(DBG_PCDV,
++				    "EP%d-%s: type=%d, mps=%d\n",
++				    dwc_ep->num, (dwc_ep->is_in ? "IN" : "OUT"),
++				    dwc_ep->type, dwc_ep->maxpacket);
++#endif
++			doepint.d32 =
++			    dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep);
++			/* Moved this interrupt upper due to core deffect of asserting
++			 * OUT EP 0 xfercompl along with stsphsrcvd in BDMA */
++			if (doepint.b.stsphsercvd) {
++				deptsiz0_data_t deptsiz;
++				CLEAR_OUT_EP_INTR(core_if, epnum, stsphsercvd);
++				deptsiz.d32 =
++				    DWC_READ_REG32(&core_if->dev_if->
++						   out_ep_regs[0]->doeptsiz);
++				if (core_if->snpsid >= OTG_CORE_REV_3_00a
++				    && core_if->dma_enable
++				    && core_if->dma_desc_enable == 0
++				    && doepint.b.xfercompl
++				    && deptsiz.b.xfersize == 24) {
++					CLEAR_OUT_EP_INTR(core_if, epnum,
++							  xfercompl);
++					doepint.b.xfercompl = 0;
++					ep0_out_start(core_if, pcd);
++				}
++				if ((core_if->dma_desc_enable) ||
++				    (core_if->dma_enable
++				     && core_if->snpsid >=
++				     OTG_CORE_REV_3_00a)) {
++					do_setup_in_status_phase(pcd);
++				}
++			}
++			/* Transfer complete */
++			if (doepint.b.xfercompl) {
++
++				if (epnum == 0) {
++					/* Clear the bit in DOEPINTn for this interrupt */
++					CLEAR_OUT_EP_INTR(core_if, epnum, xfercompl);
++					if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
++						DWC_DEBUGPL(DBG_PCDV, "DOEPINT=%x doepint=%x\n",
++							DWC_READ_REG32(&core_if->dev_if->out_ep_regs[0]->doepint),
++							doepint.d32);
++						DWC_DEBUGPL(DBG_PCDV, "DOEPCTL=%x \n",
++							DWC_READ_REG32(&core_if->dev_if->out_ep_regs[0]->doepctl));
++
++						if (core_if->snpsid >= OTG_CORE_REV_3_00a
++							&& core_if->dma_enable == 0) {
++							doepint_data_t doepint;
++							doepint.d32 = DWC_READ_REG32(&core_if->dev_if->
++														out_ep_regs[0]->doepint);
++							if (pcd->ep0state == EP0_IDLE && doepint.b.sr) {
++								CLEAR_OUT_EP_INTR(core_if, epnum, sr);
++								goto exit_xfercompl;
++							}
++						}
++						/* In case of DDMA  look at SR bit to go to the Data Stage */
++						if (core_if->dma_desc_enable) {
++							dev_dma_desc_sts_t status = {.d32 = 0};
++							if (pcd->ep0state == EP0_IDLE) {
++								status.d32 = core_if->dev_if->setup_desc_addr[core_if->
++											dev_if->setup_desc_index]->status.d32;
++								if(pcd->data_terminated) {
++									 pcd->data_terminated = 0;
++									 status.d32 = core_if->dev_if->out_desc_addr->status.d32;
++									 dwc_memcpy(&pcd->setup_pkt->req, pcd->backup_buf, 8);
++								}
++								if (status.b.sr) {
++									if (doepint.b.setup) {
++										DWC_DEBUGPL(DBG_PCDV, "DMA DESC EP0_IDLE SR=1 setup=1\n");
++										/* Already started data stage, clear setup */
++										CLEAR_OUT_EP_INTR(core_if, epnum, setup);
++										doepint.b.setup = 0;
++										handle_ep0(pcd);
++										/* Prepare for more setup packets */
++										if (pcd->ep0state == EP0_IN_STATUS_PHASE ||
++											pcd->ep0state == EP0_IN_DATA_PHASE) {
++											ep0_out_start(core_if, pcd);
++										}
++
++										goto exit_xfercompl;
++									} else {
++										/* Prepare for more setup packets */
++										DWC_DEBUGPL(DBG_PCDV,
++											"EP0_IDLE SR=1 setup=0 new setup comes\n");
++										ep0_out_start(core_if, pcd);
++									}
++								}
++							} else {
++								dwc_otg_pcd_request_t *req;
++								dev_dma_desc_sts_t status = {.d32 = 0};
++								diepint_data_t diepint0;
++								diepint0.d32 = DWC_READ_REG32(&core_if->dev_if->
++															in_ep_regs[0]->diepint);
++
++								if (pcd->ep0state == EP0_STALL || pcd->ep0state == EP0_DISCONNECT) {
++									DWC_ERROR("EP0 is stalled/disconnected\n");
++								}
++
++								/* Clear IN xfercompl if set */
++								if (diepint0.b.xfercompl && (pcd->ep0state == EP0_IN_STATUS_PHASE
++									|| pcd->ep0state == EP0_IN_DATA_PHASE)) {
++									DWC_WRITE_REG32(&core_if->dev_if->
++										in_ep_regs[0]->diepint, diepint0.d32);
++								}
++
++								status.d32 = core_if->dev_if->setup_desc_addr[core_if->
++									dev_if->setup_desc_index]->status.d32;
++
++								if (ep->dwc_ep.xfer_count != ep->dwc_ep.total_len
++									&& (pcd->ep0state == EP0_OUT_DATA_PHASE))
++									status.d32 = core_if->dev_if->out_desc_addr->status.d32;
++								if (pcd->ep0state == EP0_OUT_STATUS_PHASE)
++									status.d32 = core_if->dev_if->
++									out_desc_addr->status.d32;
++
++								if (status.b.sr) {
++									if (DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++										DWC_DEBUGPL(DBG_PCDV, "Request queue empty!!\n");
++									} else {
++										DWC_DEBUGPL(DBG_PCDV, "complete req!!\n");
++										req = DWC_CIRCLEQ_FIRST(&ep->queue);
++										if (ep->dwc_ep.xfer_count != ep->dwc_ep.total_len &&
++											pcd->ep0state == EP0_OUT_DATA_PHASE) {
++												/* Read arrived setup packet from req->buf */
++												dwc_memcpy(&pcd->setup_pkt->req,
++													req->buf + ep->dwc_ep.xfer_count, 8);
++										}
++										req->actual = ep->dwc_ep.xfer_count;
++										dwc_otg_request_done(ep, req, -ECONNRESET);
++										ep->dwc_ep.start_xfer_buff = 0;
++										ep->dwc_ep.xfer_buff = 0;
++										ep->dwc_ep.xfer_len = 0;
++									}
++									pcd->ep0state = EP0_IDLE;
++									if (doepint.b.setup) {
++										DWC_DEBUGPL(DBG_PCDV, "EP0_IDLE SR=1 setup=1\n");
++										/* Data stage started, clear setup */
++										CLEAR_OUT_EP_INTR(core_if, epnum, setup);
++										doepint.b.setup = 0;
++										handle_ep0(pcd);
++										/* Prepare for setup packets if ep0in was enabled*/
++										if (pcd->ep0state == EP0_IN_STATUS_PHASE) {
++											ep0_out_start(core_if, pcd);
++										}
++
++										goto exit_xfercompl;
++									} else {
++										/* Prepare for more setup packets */
++										DWC_DEBUGPL(DBG_PCDV,
++											"EP0_IDLE SR=1 setup=0 new setup comes 2\n");
++										ep0_out_start(core_if, pcd);
++									}
++								}
++							}
++						}
++						if (core_if->snpsid >= OTG_CORE_REV_2_94a && core_if->dma_enable
++							&& core_if->dma_desc_enable == 0) {
++							doepint_data_t doepint_temp = {.d32 = 0};
++							deptsiz0_data_t doeptsize0 = {.d32 = 0 };
++							doepint_temp.d32 = DWC_READ_REG32(&core_if->dev_if->
++															out_ep_regs[ep->dwc_ep.num]->doepint);
++							doeptsize0.d32 = DWC_READ_REG32(&core_if->dev_if->
++															out_ep_regs[ep->dwc_ep.num]->doeptsiz);
++							if (pcd->ep0state == EP0_IDLE) {
++								if (doepint_temp.b.sr) {
++									CLEAR_OUT_EP_INTR(core_if, epnum, sr);
++								}
++									doepint.d32 = DWC_READ_REG32(&core_if->dev_if->
++																	out_ep_regs[0]->doepint);
++									if (doeptsize0.b.supcnt == 3) {
++										DWC_DEBUGPL(DBG_ANY, "Rolling over!!!!!!!\n");
++										ep->dwc_ep.stp_rollover = 1;
++									}
++									if (doepint.b.setup) {
++retry:
++										/* Already started data stage, clear setup */
++										CLEAR_OUT_EP_INTR(core_if, epnum, setup);
++										doepint.b.setup = 0;
++										handle_ep0(pcd);
++										ep->dwc_ep.stp_rollover = 0;
++										/* Prepare for more setup packets */
++										if (pcd->ep0state == EP0_IN_STATUS_PHASE ||
++											pcd->ep0state == EP0_IN_DATA_PHASE) {
++											ep0_out_start(core_if, pcd);
++										}
++										goto exit_xfercompl;
++									} else {
++										/* Prepare for more setup packets */
++										DWC_DEBUGPL(DBG_ANY,
++											"EP0_IDLE SR=1 setup=0 new setup comes\n");
++										doepint.d32 = DWC_READ_REG32(&core_if->dev_if->
++																	out_ep_regs[0]->doepint);
++										if(doepint.b.setup)
++											goto retry;
++										ep0_out_start(core_if, pcd);
++									}
++							} else {
++								dwc_otg_pcd_request_t *req;
++								diepint_data_t diepint0 = {.d32 = 0};
++								doepint_data_t doepint_temp = {.d32 = 0};
++								depctl_data_t diepctl0;
++								diepint0.d32 = DWC_READ_REG32(&core_if->dev_if->
++																in_ep_regs[0]->diepint);
++								diepctl0.d32 = DWC_READ_REG32(&core_if->dev_if->
++																in_ep_regs[0]->diepctl);
++
++								if (pcd->ep0state == EP0_IN_DATA_PHASE
++									|| pcd->ep0state == EP0_IN_STATUS_PHASE) {
++									if (diepint0.b.xfercompl) {
++										DWC_WRITE_REG32(&core_if->dev_if->
++											in_ep_regs[0]->diepint, diepint0.d32);
++									}
++									if (diepctl0.b.epena) {
++										diepint_data_t diepint = {.d32 = 0};
++										diepctl0.b.snak = 1;
++										DWC_WRITE_REG32(&core_if->dev_if->
++														in_ep_regs[0]->diepctl, diepctl0.d32);
++										do {
++											dwc_udelay(10);
++											diepint.d32 = DWC_READ_REG32(&core_if->dev_if->
++												in_ep_regs[0]->diepint);
++										} while (!diepint.b.inepnakeff);
++										diepint.b.inepnakeff = 1;
++										DWC_WRITE_REG32(&core_if->dev_if->
++											in_ep_regs[0]->diepint, diepint.d32);
++										diepctl0.d32 = 0;
++										diepctl0.b.epdis = 1;
++										DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[0]->diepctl,
++														diepctl0.d32);
++										do {
++											dwc_udelay(10);
++											diepint.d32 = DWC_READ_REG32(&core_if->dev_if->
++												in_ep_regs[0]->diepint);
++										} while (!diepint.b.epdisabled);
++										diepint.b.epdisabled = 1;
++										DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[0]->diepint,
++															diepint.d32);
++									}
++								}
++								doepint_temp.d32 = DWC_READ_REG32(&core_if->dev_if->
++																out_ep_regs[ep->dwc_ep.num]->doepint);
++								if (doepint_temp.b.sr) {
++									CLEAR_OUT_EP_INTR(core_if, epnum, sr);
++									if (DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++										DWC_DEBUGPL(DBG_PCDV, "Request queue empty!!\n");
++									} else {
++										DWC_DEBUGPL(DBG_PCDV, "complete req!!\n");
++										req = DWC_CIRCLEQ_FIRST(&ep->queue);
++										if (ep->dwc_ep.xfer_count != ep->dwc_ep.total_len &&
++											pcd->ep0state == EP0_OUT_DATA_PHASE) {
++												/* Read arrived setup packet from req->buf */
++												dwc_memcpy(&pcd->setup_pkt->req,
++													req->buf + ep->dwc_ep.xfer_count, 8);
++										}
++										req->actual = ep->dwc_ep.xfer_count;
++										dwc_otg_request_done(ep, req, -ECONNRESET);
++										ep->dwc_ep.start_xfer_buff = 0;
++										ep->dwc_ep.xfer_buff = 0;
++										ep->dwc_ep.xfer_len = 0;
++									}
++									pcd->ep0state = EP0_IDLE;
++									if (doepint.b.setup) {
++										DWC_DEBUGPL(DBG_PCDV, "EP0_IDLE SR=1 setup=1\n");
++										/* Data stage started, clear setup */
++										CLEAR_OUT_EP_INTR(core_if, epnum, setup);
++										doepint.b.setup = 0;
++										handle_ep0(pcd);
++										/* Prepare for setup packets if ep0in was enabled*/
++										if (pcd->ep0state == EP0_IN_STATUS_PHASE) {
++											ep0_out_start(core_if, pcd);
++										}
++										goto exit_xfercompl;
++									} else {
++										/* Prepare for more setup packets */
++										DWC_DEBUGPL(DBG_PCDV,
++											"EP0_IDLE SR=1 setup=0 new setup comes 2\n");
++										ep0_out_start(core_if, pcd);
++									}
++								}
++							}
++						}
++						if (core_if->dma_enable == 0 || pcd->ep0state != EP0_IDLE)
++							handle_ep0(pcd);
++exit_xfercompl:
++						DWC_DEBUGPL(DBG_PCDV, "DOEPINT=%x doepint=%x\n",
++							dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep), doepint.d32);
++					} else {
++					if (core_if->dma_desc_enable == 0
++					    || pcd->ep0state != EP0_IDLE)
++						handle_ep0(pcd);
++					}
++#ifdef DWC_EN_ISOC
++				} else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++					if (doepint.b.pktdrpsts == 0) {
++						/* Clear the bit in DOEPINTn for this interrupt */
++						CLEAR_OUT_EP_INTR(core_if,
++								  epnum,
++								  xfercompl);
++						complete_iso_ep(pcd, ep);
++					} else {
++
++						doepint_data_t doepint = {.d32 = 0 };
++						doepint.b.xfercompl = 1;
++						doepint.b.pktdrpsts = 1;
++						DWC_WRITE_REG32
++						    (&core_if->dev_if->out_ep_regs
++						     [epnum]->doepint,
++						     doepint.d32);
++						if (handle_iso_out_pkt_dropped
++						    (core_if, dwc_ep)) {
++							complete_iso_ep(pcd,
++									ep);
++						}
++					}
++#endif /* DWC_EN_ISOC */
++#ifdef DWC_UTE_PER_IO
++				} else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++					CLEAR_OUT_EP_INTR(core_if, epnum, xfercompl);
++					if (!ep->stopped)
++						complete_xiso_ep(ep);
++#endif /* DWC_UTE_PER_IO */
++				} else {
++					/* Clear the bit in DOEPINTn for this interrupt */
++					CLEAR_OUT_EP_INTR(core_if, epnum,
++							  xfercompl);
++
++					if (core_if->core_params->dev_out_nak) {
++						DWC_TIMER_CANCEL(pcd->core_if->ep_xfer_timer[epnum]);
++						pcd->core_if->ep_xfer_info[epnum].state = 0;
++#ifdef DEBUG
++						print_memory_payload(pcd, dwc_ep);
++#endif
++					}
++					complete_ep(ep);
++				}
++
++			}
++
++			/* Endpoint disable      */
++			if (doepint.b.epdisabled) {
++
++				/* Clear the bit in DOEPINTn for this interrupt */
++				CLEAR_OUT_EP_INTR(core_if, epnum, epdisabled);
++				if (core_if->core_params->dev_out_nak) {
++#ifdef DEBUG
++					print_memory_payload(pcd, dwc_ep);
++#endif
++					/* In case of timeout condition */
++					if (core_if->ep_xfer_info[epnum].state == 2) {
++						dctl.d32 = DWC_READ_REG32(&core_if->dev_if->
++										dev_global_regs->dctl);
++						dctl.b.cgoutnak = 1;
++						DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl,
++																dctl.d32);
++						/* Unmask goutnakeff interrupt which was masked
++						 * during handle nak out interrupt */
++						gintmsk.b.goutnakeff = 1;
++						DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk,
++																0, gintmsk.d32);
++
++						complete_ep(ep);
++					}
++				}
++				if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC)
++				{
++					dctl_data_t dctl;
++					gintmsk_data_t intr_mask = {.d32 = 0};
++					dwc_otg_pcd_request_t *req = 0;
++
++					dctl.d32 = DWC_READ_REG32(&core_if->dev_if->
++						dev_global_regs->dctl);
++					dctl.b.cgoutnak = 1;
++					DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl,
++						dctl.d32);
++
++					intr_mask.d32 = 0;
++					intr_mask.b.incomplisoout = 1;
++
++					/* Get any pending requests */
++					if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++						req = DWC_CIRCLEQ_FIRST(&ep->queue);
++						if (!req) {
++							DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep);
++						} else {
++							dwc_otg_request_done(ep, req, 0);
++							start_next_request(ep);
++						}
++					} else {
++						DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep);
++					}
++				}
++			}
++			/* AHB Error */
++			if (doepint.b.ahberr) {
++				DWC_ERROR("EP%d OUT AHB Error\n", epnum);
++				DWC_ERROR("EP%d DEPDMA=0x%08x \n",
++					  epnum, core_if->dev_if->out_ep_regs[epnum]->doepdma);
++				CLEAR_OUT_EP_INTR(core_if, epnum, ahberr);
++			}
++			/* Setup Phase Done (contorl EPs) */
++			if (doepint.b.setup) {
++#ifdef DEBUG_EP0
++				DWC_DEBUGPL(DBG_PCD, "EP%d SETUP Done\n", epnum);
++#endif
++				CLEAR_OUT_EP_INTR(core_if, epnum, setup);
++
++				handle_ep0(pcd);
++			}
++
++			/** OUT EP BNA Intr */
++			if (doepint.b.bna) {
++				CLEAR_OUT_EP_INTR(core_if, epnum, bna);
++				if (core_if->dma_desc_enable) {
++#ifdef DWC_EN_ISOC
++					if (dwc_ep->type ==
++					    DWC_OTG_EP_TYPE_ISOC) {
++						/*
++						 * This checking is performed to prevent first "false" BNA
++						 * handling occuring right after reconnect
++						 */
++						if (dwc_ep->next_frame !=
++						    0xffffffff)
++							dwc_otg_pcd_handle_iso_bna(ep);
++					} else
++#endif				/* DWC_EN_ISOC */
++					{
++						dwc_otg_pcd_handle_noniso_bna(ep);
++					}
++				}
++			}
++			/* Babble Interrupt */
++			if (doepint.b.babble) {
++				DWC_DEBUGPL(DBG_ANY, "EP%d OUT Babble\n",
++					    epnum);
++				handle_out_ep_babble_intr(pcd, epnum);
++
++				CLEAR_OUT_EP_INTR(core_if, epnum, babble);
++			}
++			if (doepint.b.outtknepdis) {
++				DWC_DEBUGPL(DBG_ANY, "EP%d OUT Token received when EP is \
++					disabled\n",epnum);
++				if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
++					doepmsk_data_t doepmsk = {.d32 = 0};
++					ep->dwc_ep.frame_num = core_if->frame_num;
++					if (ep->dwc_ep.bInterval > 1) {
++						depctl_data_t depctl;
++						depctl.d32 = DWC_READ_REG32(&core_if->dev_if->
++													out_ep_regs[epnum]->doepctl);
++						if (ep->dwc_ep.frame_num & 0x1) {
++							depctl.b.setd1pid = 1;
++							depctl.b.setd0pid = 0;
++						} else {
++							depctl.b.setd0pid = 1;
++							depctl.b.setd1pid = 0;
++						}
++						DWC_WRITE_REG32(&core_if->dev_if->
++										out_ep_regs[epnum]->doepctl, depctl.d32);
++					}
++					start_next_request(ep);
++					doepmsk.b.outtknepdis = 1;
++					DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk,
++								 doepmsk.d32, 0);
++				}
++				CLEAR_OUT_EP_INTR(core_if, epnum, outtknepdis);
++			}
++
++			/* NAK Interrutp */
++			if (doepint.b.nak) {
++				DWC_DEBUGPL(DBG_ANY, "EP%d OUT NAK\n", epnum);
++				handle_out_ep_nak_intr(pcd, epnum);
++
++				CLEAR_OUT_EP_INTR(core_if, epnum, nak);
++			}
++			/* NYET Interrutp */
++			if (doepint.b.nyet) {
++				DWC_DEBUGPL(DBG_ANY, "EP%d OUT NYET\n", epnum);
++				handle_out_ep_nyet_intr(pcd, epnum);
++
++				CLEAR_OUT_EP_INTR(core_if, epnum, nyet);
++			}
++		}
++
++		epnum++;
++		ep_intr >>= 1;
++	}
++
++	return 1;
++
++#undef CLEAR_OUT_EP_INTR
++}
++static int drop_transfer(uint32_t trgt_fr, uint32_t curr_fr, uint8_t frm_overrun)
++{
++	int retval = 0;
++	if(!frm_overrun && curr_fr >= trgt_fr)
++		retval = 1;
++	else if (frm_overrun
++		 && (curr_fr >= trgt_fr && ((curr_fr - trgt_fr) < 0x3FFF / 2)))
++		retval = 1;
++	return retval;
++}
++/**
++ * Incomplete ISO IN Transfer Interrupt.
++ * This interrupt indicates one of the following conditions occurred
++ * while transmitting an ISOC transaction.
++ * - Corrupted IN Token for ISOC EP.
++ * - Packet not complete in FIFO.
++ * The follow actions will be taken:
++ *	-#	Determine the EP
++ *	-#	Set incomplete flag in dwc_ep structure
++ *	-#	Disable EP; when "Endpoint Disabled" interrupt is received
++ *		Flush FIFO
++ */
++int32_t dwc_otg_pcd_handle_incomplete_isoc_in_intr(dwc_otg_pcd_t * pcd)
++{
++	gintsts_data_t gintsts;
++
++#ifdef DWC_EN_ISOC
++	dwc_otg_dev_if_t *dev_if;
++	deptsiz_data_t deptsiz = {.d32 = 0 };
++	depctl_data_t depctl = {.d32 = 0 };
++	dsts_data_t dsts = {.d32 = 0 };
++	dwc_ep_t *dwc_ep;
++	int i;
++
++	dev_if = GET_CORE_IF(pcd)->dev_if;
++
++	for (i = 1; i <= dev_if->num_in_eps; ++i) {
++		dwc_ep = &pcd->in_ep[i].dwc_ep;
++		if (dwc_ep->active && dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++			deptsiz.d32 =
++			    DWC_READ_REG32(&dev_if->in_ep_regs[i]->dieptsiz);
++			depctl.d32 =
++			    DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
++
++			if (depctl.b.epdis && deptsiz.d32) {
++				set_current_pkt_info(GET_CORE_IF(pcd), dwc_ep);
++				if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
++					dwc_ep->cur_pkt = 0;
++					dwc_ep->proc_buf_num =
++					    (dwc_ep->proc_buf_num ^ 1) & 0x1;
++
++					if (dwc_ep->proc_buf_num) {
++						dwc_ep->cur_pkt_addr =
++						    dwc_ep->xfer_buff1;
++						dwc_ep->cur_pkt_dma_addr =
++						    dwc_ep->dma_addr1;
++					} else {
++						dwc_ep->cur_pkt_addr =
++						    dwc_ep->xfer_buff0;
++						dwc_ep->cur_pkt_dma_addr =
++						    dwc_ep->dma_addr0;
++					}
++
++				}
++
++				dsts.d32 =
++				    DWC_READ_REG32(&GET_CORE_IF(pcd)->dev_if->
++						   dev_global_regs->dsts);
++				dwc_ep->next_frame = dsts.b.soffn;
++
++				dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF
++								  (pcd),
++								  dwc_ep);
++			}
++		}
++	}
++
++#else
++	depctl_data_t depctl = {.d32 = 0 };
++	dwc_ep_t *dwc_ep;
++	dwc_otg_dev_if_t *dev_if;
++	int i;
++	dev_if = GET_CORE_IF(pcd)->dev_if;
++
++	DWC_DEBUGPL(DBG_PCD,"Incomplete ISO IN \n");
++
++	for (i = 1; i <= dev_if->num_in_eps; ++i) {
++		dwc_ep = &pcd->in_ep[i-1].dwc_ep;
++		depctl.d32 =
++			DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
++		if (depctl.b.epena && dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++			if (drop_transfer(dwc_ep->frame_num, GET_CORE_IF(pcd)->frame_num,
++							dwc_ep->frm_overrun))
++			{
++				depctl.d32 =
++					DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
++				depctl.b.snak = 1;
++				depctl.b.epdis = 1;
++				DWC_MODIFY_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32, depctl.d32);
++			}
++		}
++	}
++
++	/*intr_mask.b.incomplisoin = 1;
++	DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++			 intr_mask.d32, 0);	 */
++#endif				//DWC_EN_ISOC
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.incomplisoin = 1;
++	DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * Incomplete ISO OUT Transfer Interrupt.
++ *
++ * This interrupt indicates that the core has dropped an ISO OUT
++ * packet. The following conditions can be the cause:
++ * - FIFO Full, the entire packet would not fit in the FIFO.
++ * - CRC Error
++ * - Corrupted Token
++ * The follow actions will be taken:
++ *	-#	Determine the EP
++ *	-#	Set incomplete flag in dwc_ep structure
++ *	-#	Read any data from the FIFO
++ *	-#	Disable EP. When "Endpoint Disabled" interrupt is received
++ *		re-enable EP.
++ */
++int32_t dwc_otg_pcd_handle_incomplete_isoc_out_intr(dwc_otg_pcd_t * pcd)
++{
++
++	gintsts_data_t gintsts;
++
++#ifdef DWC_EN_ISOC
++	dwc_otg_dev_if_t *dev_if;
++	deptsiz_data_t deptsiz = {.d32 = 0 };
++	depctl_data_t depctl = {.d32 = 0 };
++	dsts_data_t dsts = {.d32 = 0 };
++	dwc_ep_t *dwc_ep;
++	int i;
++
++	dev_if = GET_CORE_IF(pcd)->dev_if;
++
++	for (i = 1; i <= dev_if->num_out_eps; ++i) {
++		dwc_ep = &pcd->in_ep[i].dwc_ep;
++		if (pcd->out_ep[i].dwc_ep.active &&
++		    pcd->out_ep[i].dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
++			deptsiz.d32 =
++			    DWC_READ_REG32(&dev_if->out_ep_regs[i]->doeptsiz);
++			depctl.d32 =
++			    DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl);
++
++			if (depctl.b.epdis && deptsiz.d32) {
++				set_current_pkt_info(GET_CORE_IF(pcd),
++						     &pcd->out_ep[i].dwc_ep);
++				if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
++					dwc_ep->cur_pkt = 0;
++					dwc_ep->proc_buf_num =
++					    (dwc_ep->proc_buf_num ^ 1) & 0x1;
++
++					if (dwc_ep->proc_buf_num) {
++						dwc_ep->cur_pkt_addr =
++						    dwc_ep->xfer_buff1;
++						dwc_ep->cur_pkt_dma_addr =
++						    dwc_ep->dma_addr1;
++					} else {
++						dwc_ep->cur_pkt_addr =
++						    dwc_ep->xfer_buff0;
++						dwc_ep->cur_pkt_dma_addr =
++						    dwc_ep->dma_addr0;
++					}
++
++				}
++
++				dsts.d32 =
++				    DWC_READ_REG32(&GET_CORE_IF(pcd)->dev_if->
++						   dev_global_regs->dsts);
++				dwc_ep->next_frame = dsts.b.soffn;
++
++				dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF
++								  (pcd),
++								  dwc_ep);
++			}
++		}
++	}
++#else
++	/** @todo implement ISR */
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	dwc_otg_core_if_t *core_if;
++	deptsiz_data_t deptsiz = {.d32 = 0 };
++	depctl_data_t depctl = {.d32 = 0 };
++	dctl_data_t dctl = {.d32 = 0 };
++	dwc_ep_t *dwc_ep = NULL;
++	int i;
++	core_if = GET_CORE_IF(pcd);
++
++	for (i = 0; i < core_if->dev_if->num_out_eps; ++i) {
++		dwc_ep = &pcd->out_ep[i].dwc_ep;
++		depctl.d32 =
++			DWC_READ_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl);
++		if (depctl.b.epena && depctl.b.dpid == (core_if->frame_num & 0x1)) {
++			core_if->dev_if->isoc_ep = dwc_ep;
++			deptsiz.d32 =
++					DWC_READ_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz);
++				break;
++		}
++	}
++	dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl);
++	gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++	intr_mask.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk);
++
++	if (!intr_mask.b.goutnakeff) {
++		/* Unmask it */
++		intr_mask.b.goutnakeff = 1;
++		DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, intr_mask.d32);
++	}
++	if (!gintsts.b.goutnakeff) {
++		dctl.b.sgoutnak = 1;
++	}
++	DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32);
++
++	depctl.d32 = DWC_READ_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl);
++	if (depctl.b.epena) {
++		depctl.b.epdis = 1;
++		depctl.b.snak = 1;
++	}
++	DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl, depctl.d32);
++
++	intr_mask.d32 = 0;
++	intr_mask.b.incomplisoout = 1;
++
++#endif /* DWC_EN_ISOC */
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.incomplisoout = 1;
++	DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This function handles the Global IN NAK Effective interrupt.
++ *
++ */
++int32_t dwc_otg_pcd_handle_in_nak_effective(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
++	depctl_data_t diepctl = {.d32 = 0 };
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	gintsts_data_t gintsts;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	int i;
++
++	DWC_DEBUGPL(DBG_PCD, "Global IN NAK Effective\n");
++
++	/* Disable all active IN EPs */
++	for (i = 0; i <= dev_if->num_in_eps; i++) {
++		diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
++		if (!(diepctl.b.eptype & 1) && diepctl.b.epena) {
++			if (core_if->start_predict > 0)
++				core_if->start_predict++;
++			diepctl.b.epdis = 1;
++			diepctl.b.snak = 1;
++			DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, diepctl.d32);
++		}
++	}
++
++
++	/* Disable the Global IN NAK Effective Interrupt */
++	intr_mask.b.ginnakeff = 1;
++	DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++			 intr_mask.d32, 0);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.ginnakeff = 1;
++	DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * OUT NAK Effective.
++ *
++ */
++int32_t dwc_otg_pcd_handle_out_nak_effective(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	gintsts_data_t gintsts;
++	depctl_data_t doepctl;
++	int i;
++
++	/* Disable the Global OUT NAK Effective Interrupt */
++	intr_mask.b.goutnakeff = 1;
++	DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++		intr_mask.d32, 0);
++
++	/* If DEV OUT NAK enabled*/
++	if (pcd->core_if->core_params->dev_out_nak) {
++		/* Run over all out endpoints to determine the ep number on
++		 * which the timeout has happened
++		 */
++		for (i = 0; i <= dev_if->num_out_eps; i++) {
++			if ( pcd->core_if->ep_xfer_info[i].state == 2 )
++				break;
++		}
++		if (i > dev_if->num_out_eps) {
++			dctl_data_t dctl;
++			dctl.d32 =
++			    DWC_READ_REG32(&dev_if->dev_global_regs->dctl);
++			dctl.b.cgoutnak = 1;
++			DWC_WRITE_REG32(&dev_if->dev_global_regs->dctl,
++				dctl.d32);
++			goto out;
++		}
++
++		/* Disable the endpoint */
++		doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl);
++		if (doepctl.b.epena) {
++			doepctl.b.epdis = 1;
++			doepctl.b.snak = 1;
++		}
++		DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, doepctl.d32);
++		return 1;
++	}
++	/* We come here from Incomplete ISO OUT handler */
++	if (dev_if->isoc_ep) {
++		dwc_ep_t *dwc_ep = (dwc_ep_t *)dev_if->isoc_ep;
++		uint32_t epnum = dwc_ep->num;
++		doepint_data_t doepint;
++		doepint.d32 =
++		    DWC_READ_REG32(&dev_if->out_ep_regs[dwc_ep->num]->doepint);
++		dev_if->isoc_ep = NULL;
++		doepctl.d32 =
++		    DWC_READ_REG32(&dev_if->out_ep_regs[epnum]->doepctl);
++		DWC_PRINTF("Before disable DOEPCTL = %08x\n", doepctl.d32);
++		if (doepctl.b.epena) {
++			doepctl.b.epdis = 1;
++			doepctl.b.snak = 1;
++		}
++		DWC_WRITE_REG32(&dev_if->out_ep_regs[epnum]->doepctl,
++				doepctl.d32);
++		return 1;
++	} else
++		DWC_PRINTF("INTERRUPT Handler not implemented for %s\n",
++			   "Global OUT NAK Effective\n");
++
++out:
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.goutnakeff = 1;
++	DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * PCD interrupt handler.
++ *
++ * The PCD handles the device interrupts.  Many conditions can cause a
++ * device interrupt. When an interrupt occurs, the device interrupt
++ * service routine determines the cause of the interrupt and
++ * dispatches handling to the appropriate function. These interrupt
++ * handling functions are described below.
++ *
++ * All interrupt registers are processed from LSB to MSB.
++ *
++ */
++int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++#ifdef VERBOSE
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++#endif
++	gintsts_data_t gintr_status;
++	int32_t retval = 0;
++
++	/* Exit from ISR if core is hibernated */
++	if (core_if->hibernation_suspend == 1) {
++		return retval;
++	}
++#ifdef VERBOSE
++	DWC_DEBUGPL(DBG_ANY, "%s() gintsts=%08x	 gintmsk=%08x\n",
++		    __func__,
++		    DWC_READ_REG32(&global_regs->gintsts),
++		    DWC_READ_REG32(&global_regs->gintmsk));
++#endif
++
++	if (dwc_otg_is_device_mode(core_if)) {
++		DWC_SPINLOCK(pcd->lock);
++#ifdef VERBOSE
++		DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%08x  gintmsk=%08x\n",
++			    __func__,
++			    DWC_READ_REG32(&global_regs->gintsts),
++			    DWC_READ_REG32(&global_regs->gintmsk));
++#endif
++
++		gintr_status.d32 = dwc_otg_read_core_intr(core_if);
++
++		DWC_DEBUGPL(DBG_PCDV, "%s: gintsts&gintmsk=%08x\n",
++			    __func__, gintr_status.d32);
++
++		if (gintr_status.b.sofintr) {
++			retval |= dwc_otg_pcd_handle_sof_intr(pcd);
++		}
++		if (gintr_status.b.rxstsqlvl) {
++			retval |=
++			    dwc_otg_pcd_handle_rx_status_q_level_intr(pcd);
++		}
++		if (gintr_status.b.nptxfempty) {
++			retval |= dwc_otg_pcd_handle_np_tx_fifo_empty_intr(pcd);
++		}
++		if (gintr_status.b.goutnakeff) {
++			retval |= dwc_otg_pcd_handle_out_nak_effective(pcd);
++		}
++		if (gintr_status.b.i2cintr) {
++			retval |= dwc_otg_pcd_handle_i2c_intr(pcd);
++		}
++		if (gintr_status.b.erlysuspend) {
++			retval |= dwc_otg_pcd_handle_early_suspend_intr(pcd);
++		}
++		if (gintr_status.b.usbreset) {
++			retval |= dwc_otg_pcd_handle_usb_reset_intr(pcd);
++		}
++		if (gintr_status.b.enumdone) {
++			retval |= dwc_otg_pcd_handle_enum_done_intr(pcd);
++		}
++		if (gintr_status.b.isooutdrop) {
++			retval |=
++			    dwc_otg_pcd_handle_isoc_out_packet_dropped_intr
++			    (pcd);
++		}
++		if (gintr_status.b.eopframe) {
++			retval |=
++			    dwc_otg_pcd_handle_end_periodic_frame_intr(pcd);
++		}
++		if (gintr_status.b.inepint) {
++			if (!core_if->multiproc_int_enable) {
++				retval |= dwc_otg_pcd_handle_in_ep_intr(pcd);
++			}
++		}
++		if (gintr_status.b.outepintr) {
++			if (!core_if->multiproc_int_enable) {
++				retval |= dwc_otg_pcd_handle_out_ep_intr(pcd);
++			}
++		}
++		if (gintr_status.b.epmismatch) {
++			retval |= dwc_otg_pcd_handle_ep_mismatch_intr(pcd);
++		}
++		if (gintr_status.b.fetsusp) {
++			retval |= dwc_otg_pcd_handle_ep_fetsusp_intr(pcd);
++		}
++		if (gintr_status.b.ginnakeff) {
++			retval |= dwc_otg_pcd_handle_in_nak_effective(pcd);
++		}
++		if (gintr_status.b.incomplisoin) {
++			retval |=
++			    dwc_otg_pcd_handle_incomplete_isoc_in_intr(pcd);
++		}
++		if (gintr_status.b.incomplisoout) {
++			retval |=
++			    dwc_otg_pcd_handle_incomplete_isoc_out_intr(pcd);
++		}
++
++		/* In MPI mode Device Endpoints interrupts are asserted
++		 * without setting outepintr and inepint bits set, so these
++		 * Interrupt handlers are called without checking these bit-fields
++		 */
++		if (core_if->multiproc_int_enable) {
++			retval |= dwc_otg_pcd_handle_in_ep_intr(pcd);
++			retval |= dwc_otg_pcd_handle_out_ep_intr(pcd);
++		}
++#ifdef VERBOSE
++		DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%0x\n", __func__,
++			    DWC_READ_REG32(&global_regs->gintsts));
++#endif
++		DWC_SPINUNLOCK(pcd->lock);
++	}
++	return retval;
++}
++
++#endif /* DWC_HOST_ONLY */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,1358 @@
++ /* ==========================================================================
++  * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_linux.c $
++  * $Revision: #21 $
++  * $Date: 2012/08/10 $
++  * $Change: 2047372 $
++  *
++  * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++  * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++  * otherwise expressly agreed to in writing between Synopsys and you.
++  *
++  * The Software IS NOT an item of Licensed Software or Licensed Product under
++  * any End User Software License Agreement or Agreement for Licensed Product
++  * with Synopsys or any supplement thereto. You are permitted to use and
++  * redistribute this Software in source and binary forms, with or without
++  * modification, provided that redistributions of source code must retain this
++  * notice. You may not view, use, disclose, copy or distribute this file or
++  * any information contained herein except pursuant to this license grant from
++  * Synopsys. If you do not agree with this notice, including the disclaimer
++  * below, then you are not authorized to use the Software.
++  *
++  * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++  * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++  * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++  * DAMAGE.
++  * ========================================================================== */
++#ifndef DWC_HOST_ONLY
++
++/** @file
++ * This file implements the Peripheral Controller Driver.
++ *
++ * The Peripheral Controller Driver (PCD) is responsible for
++ * translating requests from the Function Driver into the appropriate
++ * actions on the DWC_otg controller. It isolates the Function Driver
++ * from the specifics of the controller by providing an API to the
++ * Function Driver.
++ *
++ * The Peripheral Controller Driver for Linux will implement the
++ * Gadget API, so that the existing Gadget drivers can be used.
++ * (Gadget Driver is the Linux terminology for a Function Driver.)
++ *
++ * The Linux Gadget API is defined in the header file
++ * <code><linux/usb_gadget.h></code>.  The USB EP operations API is
++ * defined in the structure <code>usb_ep_ops</code> and the USB
++ * Controller API is defined in the structure
++ * <code>usb_gadget_ops</code>.
++ *
++ */
++
++#include "dwc_otg_os_dep.h"
++#include "dwc_otg_pcd_if.h"
++#include "dwc_otg_pcd.h"
++#include "dwc_otg_driver.h"
++#include "dwc_otg_dbg.h"
++
++static struct gadget_wrapper {
++	dwc_otg_pcd_t *pcd;
++
++	struct usb_gadget gadget;
++	struct usb_gadget_driver *driver;
++
++	struct usb_ep ep0;
++	struct usb_ep in_ep[16];
++	struct usb_ep out_ep[16];
++
++} *gadget_wrapper;
++
++/* Display the contents of the buffer */
++extern void dump_msg(const u8 * buf, unsigned int length);
++/**
++ * Get the dwc_otg_pcd_ep_t* from usb_ep* pointer - NULL in case
++ * if the endpoint is not found
++ */
++static struct dwc_otg_pcd_ep *ep_from_handle(dwc_otg_pcd_t * pcd, void *handle)
++{
++	int i;
++	if (pcd->ep0.priv == handle) {
++		return &pcd->ep0;
++	}
++
++	for (i = 0; i < MAX_EPS_CHANNELS - 1; i++) {
++		if (pcd->in_ep[i].priv == handle)
++			return &pcd->in_ep[i];
++		if (pcd->out_ep[i].priv == handle)
++			return &pcd->out_ep[i];
++	}
++
++	return NULL;
++}
++
++/* USB Endpoint Operations */
++/*
++ * The following sections briefly describe the behavior of the Gadget
++ * API endpoint operations implemented in the DWC_otg driver
++ * software. Detailed descriptions of the generic behavior of each of
++ * these functions can be found in the Linux header file
++ * include/linux/usb_gadget.h.
++ *
++ * The Gadget API provides wrapper functions for each of the function
++ * pointers defined in usb_ep_ops. The Gadget Driver calls the wrapper
++ * function, which then calls the underlying PCD function. The
++ * following sections are named according to the wrapper
++ * functions. Within each section, the corresponding DWC_otg PCD
++ * function name is specified.
++ *
++ */
++
++/**
++ * This function is called by the Gadget Driver for each EP to be
++ * configured for the current configuration (SET_CONFIGURATION).
++ *
++ * This function initializes the dwc_otg_ep_t data structure, and then
++ * calls dwc_otg_ep_activate.
++ */
++static int ep_enable(struct usb_ep *usb_ep,
++		     const struct usb_endpoint_descriptor *ep_desc)
++{
++	int retval;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, usb_ep, ep_desc);
++
++	if (!usb_ep || !ep_desc || ep_desc->bDescriptorType != USB_DT_ENDPOINT) {
++		DWC_WARN("%s, bad ep or descriptor\n", __func__);
++		return -EINVAL;
++	}
++	if (usb_ep == &gadget_wrapper->ep0) {
++		DWC_WARN("%s, bad ep(0)\n", __func__);
++		return -EINVAL;
++	}
++
++	/* Check FIFO size? */
++	if (!ep_desc->wMaxPacketSize) {
++		DWC_WARN("%s, bad %s maxpacket\n", __func__, usb_ep->name);
++		return -ERANGE;
++	}
++
++	if (!gadget_wrapper->driver ||
++	    gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) {
++		DWC_WARN("%s, bogus device state\n", __func__);
++		return -ESHUTDOWN;
++	}
++
++	/* Delete after check - MAS */
++#if 0
++	nat = (uint32_t) ep_desc->wMaxPacketSize;
++	printk(KERN_ALERT "%s: nat (before) =%d\n", __func__, nat);
++	nat = (nat >> 11) & 0x03;
++	printk(KERN_ALERT "%s: nat (after) =%d\n", __func__, nat);
++#endif
++	retval = dwc_otg_pcd_ep_enable(gadget_wrapper->pcd,
++				       (const uint8_t *)ep_desc,
++				       (void *)usb_ep);
++	if (retval) {
++		DWC_WARN("dwc_otg_pcd_ep_enable failed\n");
++		return -EINVAL;
++	}
++
++	usb_ep->maxpacket = le16_to_cpu(ep_desc->wMaxPacketSize);
++
++	return 0;
++}
++
++/**
++ * This function is called when an EP is disabled due to disconnect or
++ * change in configuration. Any pending requests will terminate with a
++ * status of -ESHUTDOWN.
++ *
++ * This function modifies the dwc_otg_ep_t data structure for this EP,
++ * and then calls dwc_otg_ep_deactivate.
++ */
++static int ep_disable(struct usb_ep *usb_ep)
++{
++	int retval;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, usb_ep);
++	if (!usb_ep) {
++		DWC_DEBUGPL(DBG_PCD, "%s, %s not enabled\n", __func__,
++			    usb_ep ? usb_ep->name : NULL);
++		return -EINVAL;
++	}
++
++	retval = dwc_otg_pcd_ep_disable(gadget_wrapper->pcd, usb_ep);
++	if (retval) {
++		retval = -EINVAL;
++	}
++
++	return retval;
++}
++
++/**
++ * This function allocates a request object to use with the specified
++ * endpoint.
++ *
++ * @param ep The endpoint to be used with with the request
++ * @param gfp_flags the GFP_* flags to use.
++ */
++static struct usb_request *dwc_otg_pcd_alloc_request(struct usb_ep *ep,
++						     gfp_t gfp_flags)
++{
++	struct usb_request *usb_req;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p,%d)\n", __func__, ep, gfp_flags);
++	if (0 == ep) {
++		DWC_WARN("%s() %s\n", __func__, "Invalid EP!\n");
++		return 0;
++	}
++	usb_req = kmalloc(sizeof(*usb_req), gfp_flags);
++	if (0 == usb_req) {
++		DWC_WARN("%s() %s\n", __func__, "request allocation failed!\n");
++		return 0;
++	}
++	memset(usb_req, 0, sizeof(*usb_req));
++	usb_req->dma = DWC_DMA_ADDR_INVALID;
++
++	return usb_req;
++}
++
++/**
++ * This function frees a request object.
++ *
++ * @param ep The endpoint associated with the request
++ * @param req The request being freed
++ */
++static void dwc_otg_pcd_free_request(struct usb_ep *ep, struct usb_request *req)
++{
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, ep, req);
++
++	if (0 == ep || 0 == req) {
++		DWC_WARN("%s() %s\n", __func__,
++			 "Invalid ep or req argument!\n");
++		return;
++	}
++
++	kfree(req);
++}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++/**
++ * This function allocates an I/O buffer to be used for a transfer
++ * to/from the specified endpoint.
++ *
++ * @param usb_ep The endpoint to be used with with the request
++ * @param bytes The desired number of bytes for the buffer
++ * @param dma Pointer to the buffer's DMA address; must be valid
++ * @param gfp_flags the GFP_* flags to use.
++ * @return address of a new buffer or null is buffer could not be allocated.
++ */
++static void *dwc_otg_pcd_alloc_buffer(struct usb_ep *usb_ep, unsigned bytes,
++				      dma_addr_t * dma, gfp_t gfp_flags)
++{
++	void *buf;
++	dwc_otg_pcd_t *pcd = 0;
++
++	pcd = gadget_wrapper->pcd;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p,%d,%p,%0x)\n", __func__, usb_ep, bytes,
++		    dma, gfp_flags);
++
++	/* Check dword alignment */
++	if ((bytes & 0x3UL) != 0) {
++		DWC_WARN("%s() Buffer size is not a multiple of"
++			 "DWORD size (%d)", __func__, bytes);
++	}
++
++	buf = dma_alloc_coherent(NULL, bytes, dma, gfp_flags);
++
++	/* Check dword alignment */
++	if (((int)buf & 0x3UL) != 0) {
++		DWC_WARN("%s() Buffer is not DWORD aligned (%p)",
++			 __func__, buf);
++	}
++
++	return buf;
++}
++
++/**
++ * This function frees an I/O buffer that was allocated by alloc_buffer.
++ *
++ * @param usb_ep the endpoint associated with the buffer
++ * @param buf address of the buffer
++ * @param dma The buffer's DMA address
++ * @param bytes The number of bytes of the buffer
++ */
++static void dwc_otg_pcd_free_buffer(struct usb_ep *usb_ep, void *buf,
++				    dma_addr_t dma, unsigned bytes)
++{
++	dwc_otg_pcd_t *pcd = 0;
++
++	pcd = gadget_wrapper->pcd;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p,%0x,%d)\n", __func__, buf, dma, bytes);
++
++	dma_free_coherent(NULL, bytes, buf, dma);
++}
++#endif
++
++/**
++ * This function is used to submit an I/O Request to an EP.
++ *
++ *	- When the request completes the request's completion callback
++ *	  is called to return the request to the driver.
++ *	- An EP, except control EPs, may have multiple requests
++ *	  pending.
++ *	- Once submitted the request cannot be examined or modified.
++ *	- Each request is turned into one or more packets.
++ *	- A BULK EP can queue any amount of data; the transfer is
++ *	  packetized.
++ *	- Zero length Packets are specified with the request 'zero'
++ *	  flag.
++ */
++static int ep_queue(struct usb_ep *usb_ep, struct usb_request *usb_req,
++		    gfp_t gfp_flags)
++{
++	dwc_otg_pcd_t *pcd;
++	struct dwc_otg_pcd_ep *ep = NULL;
++	int retval = 0, is_isoc_ep = 0;
++	dma_addr_t dma_addr = DWC_DMA_ADDR_INVALID;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p,%d)\n",
++		    __func__, usb_ep, usb_req, gfp_flags);
++
++	if (!usb_req || !usb_req->complete || !usb_req->buf) {
++		DWC_WARN("bad params\n");
++		return -EINVAL;
++	}
++
++	if (!usb_ep) {
++		DWC_WARN("bad ep\n");
++		return -EINVAL;
++	}
++
++	pcd = gadget_wrapper->pcd;
++	if (!gadget_wrapper->driver ||
++	    gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) {
++		DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n",
++			    gadget_wrapper->gadget.speed);
++		DWC_WARN("bogus device state\n");
++		return -ESHUTDOWN;
++	}
++
++	DWC_DEBUGPL(DBG_PCD, "%s queue req %p, len %d buf %p\n",
++		    usb_ep->name, usb_req, usb_req->length, usb_req->buf);
++
++	usb_req->status = -EINPROGRESS;
++	usb_req->actual = 0;
++
++	ep = ep_from_handle(pcd, usb_ep);
++	if (ep == NULL)
++		is_isoc_ep = 0;
++	else
++		is_isoc_ep = (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) ? 1 : 0;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++	dma_addr = usb_req->dma;
++#else
++	if (GET_CORE_IF(pcd)->dma_enable) {
++                dwc_otg_device_t *otg_dev = gadget_wrapper->pcd->otg_dev;
++                struct device *dev = NULL;
++
++                if (otg_dev != NULL)
++                        dev = DWC_OTG_OS_GETDEV(otg_dev->os_dep);
++
++		if (usb_req->length != 0 &&
++                    usb_req->dma == DWC_DMA_ADDR_INVALID) {
++                        dma_addr = dma_map_single(dev, usb_req->buf,
++                                                  usb_req->length,
++                                                  ep->dwc_ep.is_in ?
++                                                        DMA_TO_DEVICE:
++                                                        DMA_FROM_DEVICE);
++		}
++	}
++#endif
++
++#ifdef DWC_UTE_PER_IO
++	if (is_isoc_ep == 1) {
++		retval = dwc_otg_pcd_xiso_ep_queue(pcd, usb_ep, usb_req->buf, dma_addr,
++			usb_req->length, usb_req->zero, usb_req,
++			gfp_flags == GFP_ATOMIC ? 1 : 0, &usb_req->ext_req);
++		if (retval)
++			return -EINVAL;
++
++		return 0;
++	}
++#endif
++	retval = dwc_otg_pcd_ep_queue(pcd, usb_ep, usb_req->buf, dma_addr,
++				      usb_req->length, usb_req->zero, usb_req,
++				      gfp_flags == GFP_ATOMIC ? 1 : 0);
++	if (retval) {
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++/**
++ * This function cancels an I/O request from an EP.
++ */
++static int ep_dequeue(struct usb_ep *usb_ep, struct usb_request *usb_req)
++{
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, usb_ep, usb_req);
++
++	if (!usb_ep || !usb_req) {
++		DWC_WARN("bad argument\n");
++		return -EINVAL;
++	}
++	if (!gadget_wrapper->driver ||
++	    gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) {
++		DWC_WARN("bogus device state\n");
++		return -ESHUTDOWN;
++	}
++	if (dwc_otg_pcd_ep_dequeue(gadget_wrapper->pcd, usb_ep, usb_req)) {
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++/**
++ * usb_ep_set_halt stalls an endpoint.
++ *
++ * usb_ep_clear_halt clears an endpoint halt and resets its data
++ * toggle.
++ *
++ * Both of these functions are implemented with the same underlying
++ * function. The behavior depends on the value argument.
++ *
++ * @param[in] usb_ep the Endpoint to halt or clear halt.
++ * @param[in] value
++ *	- 0 means clear_halt.
++ *	- 1 means set_halt,
++ *	- 2 means clear stall lock flag.
++ *	- 3 means set  stall lock flag.
++ */
++static int ep_halt(struct usb_ep *usb_ep, int value)
++{
++	int retval = 0;
++
++	DWC_DEBUGPL(DBG_PCD, "HALT %s %d\n", usb_ep->name, value);
++
++	if (!usb_ep) {
++		DWC_WARN("bad ep\n");
++		return -EINVAL;
++	}
++
++	retval = dwc_otg_pcd_ep_halt(gadget_wrapper->pcd, usb_ep, value);
++	if (retval == -DWC_E_AGAIN) {
++		return -EAGAIN;
++	} else if (retval) {
++		retval = -EINVAL;
++	}
++
++	return retval;
++}
++
++//#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30))
++#if 0
++/**
++ * ep_wedge: sets the halt feature and ignores clear requests
++ *
++ * @usb_ep: the endpoint being wedged
++ *
++ * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT)
++ * requests. If the gadget driver clears the halt status, it will
++ * automatically unwedge the endpoint.
++ *
++ * Returns zero on success, else negative errno. *
++ * Check usb_ep_set_wedge() at "usb_gadget.h" for details
++ */
++static int ep_wedge(struct usb_ep *usb_ep)
++{
++	int retval = 0;
++
++	DWC_DEBUGPL(DBG_PCD, "WEDGE %s\n", usb_ep->name);
++
++	if (!usb_ep) {
++		DWC_WARN("bad ep\n");
++		return -EINVAL;
++	}
++
++	retval = dwc_otg_pcd_ep_wedge(gadget_wrapper->pcd, usb_ep);
++	if (retval == -DWC_E_AGAIN) {
++		retval = -EAGAIN;
++	} else if (retval) {
++		retval = -EINVAL;
++	}
++
++	return retval;
++}
++#endif
++
++#ifdef DWC_EN_ISOC
++/**
++ * This function is used to submit an ISOC Transfer Request to an EP.
++ *
++ *	- Every time a sync period completes the request's completion callback
++ *	  is called to provide data to the gadget driver.
++ *	- Once submitted the request cannot be modified.
++ *	- Each request is turned into periodic data packets untill ISO
++ *	  Transfer is stopped..
++ */
++static int iso_ep_start(struct usb_ep *usb_ep, struct usb_iso_request *req,
++			gfp_t gfp_flags)
++{
++	int retval = 0;
++
++	if (!req || !req->process_buffer || !req->buf0 || !req->buf1) {
++		DWC_WARN("bad params\n");
++		return -EINVAL;
++	}
++
++	if (!usb_ep) {
++		DWC_PRINTF("bad params\n");
++		return -EINVAL;
++	}
++
++	req->status = -EINPROGRESS;
++
++	retval =
++	    dwc_otg_pcd_iso_ep_start(gadget_wrapper->pcd, usb_ep, req->buf0,
++				     req->buf1, req->dma0, req->dma1,
++				     req->sync_frame, req->data_pattern_frame,
++				     req->data_per_frame,
++				     req->
++				     flags & USB_REQ_ISO_ASAP ? -1 :
++				     req->start_frame, req->buf_proc_intrvl,
++				     req, gfp_flags == GFP_ATOMIC ? 1 : 0);
++
++	if (retval) {
++		return -EINVAL;
++	}
++
++	return retval;
++}
++
++/**
++ * This function stops ISO EP Periodic Data Transfer.
++ */
++static int iso_ep_stop(struct usb_ep *usb_ep, struct usb_iso_request *req)
++{
++	int retval = 0;
++	if (!usb_ep) {
++		DWC_WARN("bad ep\n");
++	}
++
++	if (!gadget_wrapper->driver ||
++	    gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) {
++		DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n",
++			    gadget_wrapper->gadget.speed);
++		DWC_WARN("bogus device state\n");
++	}
++
++	dwc_otg_pcd_iso_ep_stop(gadget_wrapper->pcd, usb_ep, req);
++	if (retval) {
++		retval = -EINVAL;
++	}
++
++	return retval;
++}
++
++static struct usb_iso_request *alloc_iso_request(struct usb_ep *ep,
++						 int packets, gfp_t gfp_flags)
++{
++	struct usb_iso_request *pReq = NULL;
++	uint32_t req_size;
++
++	req_size = sizeof(struct usb_iso_request);
++	req_size +=
++	    (2 * packets * (sizeof(struct usb_gadget_iso_packet_descriptor)));
++
++	pReq = kmalloc(req_size, gfp_flags);
++	if (!pReq) {
++		DWC_WARN("Can't allocate Iso Request\n");
++		return 0;
++	}
++	pReq->iso_packet_desc0 = (void *)(pReq + 1);
++
++	pReq->iso_packet_desc1 = pReq->iso_packet_desc0 + packets;
++
++	return pReq;
++}
++
++static void free_iso_request(struct usb_ep *ep, struct usb_iso_request *req)
++{
++	kfree(req);
++}
++
++static struct usb_isoc_ep_ops dwc_otg_pcd_ep_ops = {
++	.ep_ops = {
++		   .enable = ep_enable,
++		   .disable = ep_disable,
++
++		   .alloc_request = dwc_otg_pcd_alloc_request,
++		   .free_request = dwc_otg_pcd_free_request,
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++		   .alloc_buffer = dwc_otg_pcd_alloc_buffer,
++		   .free_buffer = dwc_otg_pcd_free_buffer,
++#endif
++
++		   .queue = ep_queue,
++		   .dequeue = ep_dequeue,
++
++		   .set_halt = ep_halt,
++		   .fifo_status = 0,
++		   .fifo_flush = 0,
++		   },
++	.iso_ep_start = iso_ep_start,
++	.iso_ep_stop = iso_ep_stop,
++	.alloc_iso_request = alloc_iso_request,
++	.free_iso_request = free_iso_request,
++};
++
++#else
++
++	int (*enable) (struct usb_ep *ep,
++		const struct usb_endpoint_descriptor *desc);
++	int (*disable) (struct usb_ep *ep);
++
++	struct usb_request *(*alloc_request) (struct usb_ep *ep,
++		gfp_t gfp_flags);
++	void (*free_request) (struct usb_ep *ep, struct usb_request *req);
++
++	int (*queue) (struct usb_ep *ep, struct usb_request *req,
++		gfp_t gfp_flags);
++	int (*dequeue) (struct usb_ep *ep, struct usb_request *req);
++
++	int (*set_halt) (struct usb_ep *ep, int value);
++	int (*set_wedge) (struct usb_ep *ep);
++
++	int (*fifo_status) (struct usb_ep *ep);
++	void (*fifo_flush) (struct usb_ep *ep);
++static struct usb_ep_ops dwc_otg_pcd_ep_ops = {
++	.enable = ep_enable,
++	.disable = ep_disable,
++
++	.alloc_request = dwc_otg_pcd_alloc_request,
++	.free_request = dwc_otg_pcd_free_request,
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++	.alloc_buffer = dwc_otg_pcd_alloc_buffer,
++	.free_buffer = dwc_otg_pcd_free_buffer,
++#else
++	/* .set_wedge = ep_wedge, */
++        .set_wedge = NULL, /* uses set_halt instead */
++#endif
++
++	.queue = ep_queue,
++	.dequeue = ep_dequeue,
++
++	.set_halt = ep_halt,
++	.fifo_status = 0,
++	.fifo_flush = 0,
++
++};
++
++#endif /* _EN_ISOC_ */
++/*	Gadget Operations */
++/**
++ * The following gadget operations will be implemented in the DWC_otg
++ * PCD. Functions in the API that are not described below are not
++ * implemented.
++ *
++ * The Gadget API provides wrapper functions for each of the function
++ * pointers defined in usb_gadget_ops. The Gadget Driver calls the
++ * wrapper function, which then calls the underlying PCD function. The
++ * following sections are named according to the wrapper functions
++ * (except for ioctl, which doesn't have a wrapper function). Within
++ * each section, the corresponding DWC_otg PCD function name is
++ * specified.
++ *
++ */
++
++/**
++ *Gets the USB Frame number of the last SOF.
++ */
++static int get_frame_number(struct usb_gadget *gadget)
++{
++	struct gadget_wrapper *d;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, gadget);
++
++	if (gadget == 0) {
++		return -ENODEV;
++	}
++
++	d = container_of(gadget, struct gadget_wrapper, gadget);
++	return dwc_otg_pcd_get_frame_number(d->pcd);
++}
++
++#ifdef CONFIG_USB_DWC_OTG_LPM
++static int test_lpm_enabled(struct usb_gadget *gadget)
++{
++	struct gadget_wrapper *d;
++
++	d = container_of(gadget, struct gadget_wrapper, gadget);
++
++	return dwc_otg_pcd_is_lpm_enabled(d->pcd);
++}
++#endif
++
++/**
++ * Initiates Session Request Protocol (SRP) to wakeup the host if no
++ * session is in progress. If a session is already in progress, but
++ * the device is suspended, remote wakeup signaling is started.
++ *
++ */
++static int wakeup(struct usb_gadget *gadget)
++{
++	struct gadget_wrapper *d;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, gadget);
++
++	if (gadget == 0) {
++		return -ENODEV;
++	} else {
++		d = container_of(gadget, struct gadget_wrapper, gadget);
++	}
++	dwc_otg_pcd_wakeup(d->pcd);
++	return 0;
++}
++
++static const struct usb_gadget_ops dwc_otg_pcd_ops = {
++	.get_frame = get_frame_number,
++	.wakeup = wakeup,
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	.lpm_support = test_lpm_enabled,
++#endif
++	// current versions must always be self-powered
++};
++
++static int _setup(dwc_otg_pcd_t * pcd, uint8_t * bytes)
++{
++	int retval = -DWC_E_NOT_SUPPORTED;
++	if (gadget_wrapper->driver && gadget_wrapper->driver->setup) {
++		retval = gadget_wrapper->driver->setup(&gadget_wrapper->gadget,
++						       (struct usb_ctrlrequest
++							*)bytes);
++	}
++
++	if (retval == -ENOTSUPP) {
++		retval = -DWC_E_NOT_SUPPORTED;
++	} else if (retval < 0) {
++		retval = -DWC_E_INVALID;
++	}
++
++	return retval;
++}
++
++#ifdef DWC_EN_ISOC
++static int _isoc_complete(dwc_otg_pcd_t * pcd, void *ep_handle,
++			  void *req_handle, int proc_buf_num)
++{
++	int i, packet_count;
++	struct usb_gadget_iso_packet_descriptor *iso_packet = 0;
++	struct usb_iso_request *iso_req = req_handle;
++
++	if (proc_buf_num) {
++		iso_packet = iso_req->iso_packet_desc1;
++	} else {
++		iso_packet = iso_req->iso_packet_desc0;
++	}
++	packet_count =
++	    dwc_otg_pcd_get_iso_packet_count(pcd, ep_handle, req_handle);
++	for (i = 0; i < packet_count; ++i) {
++		int status;
++		int actual;
++		int offset;
++		dwc_otg_pcd_get_iso_packet_params(pcd, ep_handle, req_handle,
++						  i, &status, &actual, &offset);
++		switch (status) {
++		case -DWC_E_NO_DATA:
++			status = -ENODATA;
++			break;
++		default:
++			if (status) {
++				DWC_PRINTF("unknown status in isoc packet\n");
++			}
++
++		}
++		iso_packet[i].status = status;
++		iso_packet[i].offset = offset;
++		iso_packet[i].actual_length = actual;
++	}
++
++	iso_req->status = 0;
++	iso_req->process_buffer(ep_handle, iso_req);
++
++	return 0;
++}
++#endif /* DWC_EN_ISOC */
++
++#ifdef DWC_UTE_PER_IO
++/**
++ * Copy the contents of the extended request to the Linux usb_request's
++ * extended part and call the gadget's completion.
++ *
++ * @param pcd			Pointer to the pcd structure
++ * @param ep_handle		Void pointer to the usb_ep structure
++ * @param req_handle	Void pointer to the usb_request structure
++ * @param status		Request status returned from the portable logic
++ * @param ereq_port		Void pointer to the extended request structure
++ *						created in the the portable part that contains the
++ *						results of the processed iso packets.
++ */
++static int _xisoc_complete(dwc_otg_pcd_t * pcd, void *ep_handle,
++			   void *req_handle, int32_t status, void *ereq_port)
++{
++	struct dwc_ute_iso_req_ext *ereqorg = NULL;
++	struct dwc_iso_xreq_port *ereqport = NULL;
++	struct dwc_ute_iso_packet_descriptor *desc_org = NULL;
++	int i;
++	struct usb_request *req;
++	//struct dwc_ute_iso_packet_descriptor *
++	//int status = 0;
++
++	req = (struct usb_request *)req_handle;
++	ereqorg = &req->ext_req;
++	ereqport = (struct dwc_iso_xreq_port *)ereq_port;
++	desc_org = ereqorg->per_io_frame_descs;
++
++	if (req && req->complete) {
++		/* Copy the request data from the portable logic to our request */
++		for (i = 0; i < ereqport->pio_pkt_count; i++) {
++			desc_org[i].actual_length =
++			    ereqport->per_io_frame_descs[i].actual_length;
++			desc_org[i].status =
++			    ereqport->per_io_frame_descs[i].status;
++		}
++
++		switch (status) {
++		case -DWC_E_SHUTDOWN:
++			req->status = -ESHUTDOWN;
++			break;
++		case -DWC_E_RESTART:
++			req->status = -ECONNRESET;
++			break;
++		case -DWC_E_INVALID:
++			req->status = -EINVAL;
++			break;
++		case -DWC_E_TIMEOUT:
++			req->status = -ETIMEDOUT;
++			break;
++		default:
++			req->status = status;
++		}
++
++		/* And call the gadget's completion */
++		req->complete(ep_handle, req);
++	}
++
++	return 0;
++}
++#endif /* DWC_UTE_PER_IO */
++
++static int _complete(dwc_otg_pcd_t * pcd, void *ep_handle,
++		     void *req_handle, int32_t status, uint32_t actual)
++{
++	struct usb_request *req = (struct usb_request *)req_handle;
++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,27)
++	struct dwc_otg_pcd_ep *ep = NULL;
++#endif
++
++	if (req && req->complete) {
++		switch (status) {
++		case -DWC_E_SHUTDOWN:
++			req->status = -ESHUTDOWN;
++			break;
++		case -DWC_E_RESTART:
++			req->status = -ECONNRESET;
++			break;
++		case -DWC_E_INVALID:
++			req->status = -EINVAL;
++			break;
++		case -DWC_E_TIMEOUT:
++			req->status = -ETIMEDOUT;
++			break;
++		default:
++			req->status = status;
++
++		}
++
++		req->actual = actual;
++		DWC_SPINUNLOCK(pcd->lock);
++		req->complete(ep_handle, req);
++		DWC_SPINLOCK(pcd->lock);
++	}
++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,27)
++	ep = ep_from_handle(pcd, ep_handle);
++	if (GET_CORE_IF(pcd)->dma_enable) {
++                if (req->length != 0) {
++                        dwc_otg_device_t *otg_dev = gadget_wrapper->pcd->otg_dev;
++                        struct device *dev = NULL;
++
++                        if (otg_dev != NULL)
++                                  dev = DWC_OTG_OS_GETDEV(otg_dev->os_dep);
++
++			dma_unmap_single(dev, req->dma, req->length,
++                                         ep->dwc_ep.is_in ?
++                                                DMA_TO_DEVICE: DMA_FROM_DEVICE);
++                }
++	}
++#endif
++
++	return 0;
++}
++
++static int _connect(dwc_otg_pcd_t * pcd, int speed)
++{
++	gadget_wrapper->gadget.speed = speed;
++	return 0;
++}
++
++static int _disconnect(dwc_otg_pcd_t * pcd)
++{
++	if (gadget_wrapper->driver && gadget_wrapper->driver->disconnect) {
++		gadget_wrapper->driver->disconnect(&gadget_wrapper->gadget);
++	}
++	return 0;
++}
++
++static int _resume(dwc_otg_pcd_t * pcd)
++{
++	if (gadget_wrapper->driver && gadget_wrapper->driver->resume) {
++		gadget_wrapper->driver->resume(&gadget_wrapper->gadget);
++	}
++
++	return 0;
++}
++
++static int _suspend(dwc_otg_pcd_t * pcd)
++{
++	if (gadget_wrapper->driver && gadget_wrapper->driver->suspend) {
++		gadget_wrapper->driver->suspend(&gadget_wrapper->gadget);
++	}
++	return 0;
++}
++
++/**
++ * This function updates the otg values in the gadget structure.
++ */
++static int _hnp_changed(dwc_otg_pcd_t * pcd)
++{
++
++	if (!gadget_wrapper->gadget.is_otg)
++		return 0;
++
++	gadget_wrapper->gadget.b_hnp_enable = get_b_hnp_enable(pcd);
++	gadget_wrapper->gadget.a_hnp_support = get_a_hnp_support(pcd);
++	gadget_wrapper->gadget.a_alt_hnp_support = get_a_alt_hnp_support(pcd);
++	return 0;
++}
++
++static int _reset(dwc_otg_pcd_t * pcd)
++{
++	return 0;
++}
++
++#ifdef DWC_UTE_CFI
++static int _cfi_setup(dwc_otg_pcd_t * pcd, void *cfi_req)
++{
++	int retval = -DWC_E_INVALID;
++	if (gadget_wrapper->driver->cfi_feature_setup) {
++		retval =
++		    gadget_wrapper->driver->
++		    cfi_feature_setup(&gadget_wrapper->gadget,
++				      (struct cfi_usb_ctrlrequest *)cfi_req);
++	}
++
++	return retval;
++}
++#endif
++
++static const struct dwc_otg_pcd_function_ops fops = {
++	.complete = _complete,
++#ifdef DWC_EN_ISOC
++	.isoc_complete = _isoc_complete,
++#endif
++	.setup = _setup,
++	.disconnect = _disconnect,
++	.connect = _connect,
++	.resume = _resume,
++	.suspend = _suspend,
++	.hnp_changed = _hnp_changed,
++	.reset = _reset,
++#ifdef DWC_UTE_CFI
++	.cfi_setup = _cfi_setup,
++#endif
++#ifdef DWC_UTE_PER_IO
++	.xisoc_complete = _xisoc_complete,
++#endif
++};
++
++/**
++ * This function is the top level PCD interrupt handler.
++ */
++static irqreturn_t dwc_otg_pcd_irq(int irq, void *dev)
++{
++	dwc_otg_pcd_t *pcd = dev;
++	int32_t retval = IRQ_NONE;
++
++	retval = dwc_otg_pcd_handle_intr(pcd);
++	if (retval != 0) {
++		S3C2410X_CLEAR_EINTPEND();
++	}
++	return IRQ_RETVAL(retval);
++}
++
++/**
++ * This function initialized the usb_ep structures to there default
++ * state.
++ *
++ * @param d Pointer on gadget_wrapper.
++ */
++void gadget_add_eps(struct gadget_wrapper *d)
++{
++	static const char *names[] = {
++
++		"ep0",
++		"ep1in",
++		"ep2in",
++		"ep3in",
++		"ep4in",
++		"ep5in",
++		"ep6in",
++		"ep7in",
++		"ep8in",
++		"ep9in",
++		"ep10in",
++		"ep11in",
++		"ep12in",
++		"ep13in",
++		"ep14in",
++		"ep15in",
++		"ep1out",
++		"ep2out",
++		"ep3out",
++		"ep4out",
++		"ep5out",
++		"ep6out",
++		"ep7out",
++		"ep8out",
++		"ep9out",
++		"ep10out",
++		"ep11out",
++		"ep12out",
++		"ep13out",
++		"ep14out",
++		"ep15out"
++	};
++
++	int i;
++	struct usb_ep *ep;
++	int8_t dev_endpoints;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s\n", __func__);
++
++	INIT_LIST_HEAD(&d->gadget.ep_list);
++	d->gadget.ep0 = &d->ep0;
++	d->gadget.speed = USB_SPEED_UNKNOWN;
++
++	INIT_LIST_HEAD(&d->gadget.ep0->ep_list);
++
++	/**
++	 * Initialize the EP0 structure.
++	 */
++	ep = &d->ep0;
++
++	/* Init the usb_ep structure. */
++	ep->name = names[0];
++	ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops;
++
++	/**
++	 * @todo NGS: What should the max packet size be set to
++	 * here?  Before EP type is set?
++	 */
++	ep->maxpacket = MAX_PACKET_SIZE;
++	dwc_otg_pcd_ep_enable(d->pcd, NULL, ep);
++
++	list_add_tail(&ep->ep_list, &d->gadget.ep_list);
++
++	/**
++	 * Initialize the EP structures.
++	 */
++	dev_endpoints = d->pcd->core_if->dev_if->num_in_eps;
++
++	for (i = 0; i < dev_endpoints; i++) {
++		ep = &d->in_ep[i];
++
++		/* Init the usb_ep structure. */
++		ep->name = names[d->pcd->in_ep[i].dwc_ep.num];
++		ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops;
++
++		/**
++		 * @todo NGS: What should the max packet size be set to
++		 * here?  Before EP type is set?
++		 */
++		ep->maxpacket = MAX_PACKET_SIZE;
++		list_add_tail(&ep->ep_list, &d->gadget.ep_list);
++	}
++
++	dev_endpoints = d->pcd->core_if->dev_if->num_out_eps;
++
++	for (i = 0; i < dev_endpoints; i++) {
++		ep = &d->out_ep[i];
++
++		/* Init the usb_ep structure. */
++		ep->name = names[15 + d->pcd->out_ep[i].dwc_ep.num];
++		ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops;
++
++		/**
++		 * @todo NGS: What should the max packet size be set to
++		 * here?  Before EP type is set?
++		 */
++		ep->maxpacket = MAX_PACKET_SIZE;
++
++		list_add_tail(&ep->ep_list, &d->gadget.ep_list);
++	}
++
++	/* remove ep0 from the list.  There is a ep0 pointer. */
++	list_del_init(&d->ep0.ep_list);
++
++	d->ep0.maxpacket = MAX_EP0_SIZE;
++}
++
++/**
++ * This function releases the Gadget device.
++ * required by device_unregister().
++ *
++ * @todo Should this do something?	Should it free the PCD?
++ */
++static void dwc_otg_pcd_gadget_release(struct device *dev)
++{
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, dev);
++}
++
++static struct gadget_wrapper *alloc_wrapper(dwc_bus_dev_t *_dev)
++{
++	static char pcd_name[] = "dwc_otg_pcd";
++	dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev);
++	struct gadget_wrapper *d;
++	int retval;
++
++	d = DWC_ALLOC(sizeof(*d));
++	if (d == NULL) {
++		return NULL;
++	}
++
++	memset(d, 0, sizeof(*d));
++
++	d->gadget.name = pcd_name;
++	d->pcd = otg_dev->pcd;
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)
++	strcpy(d->gadget.dev.bus_id, "gadget");
++#else
++	dev_set_name(&d->gadget.dev, "%s", "gadget");
++#endif
++
++	d->gadget.dev.parent = &_dev->dev;
++	d->gadget.dev.release = dwc_otg_pcd_gadget_release;
++	d->gadget.ops = &dwc_otg_pcd_ops;
++	d->gadget.max_speed = dwc_otg_pcd_is_dualspeed(otg_dev->pcd) ? USB_SPEED_HIGH:USB_SPEED_FULL;
++	d->gadget.is_otg = dwc_otg_pcd_is_otg(otg_dev->pcd);
++
++	d->driver = 0;
++	/* Register the gadget device */
++	retval = device_register(&d->gadget.dev);
++	if (retval != 0) {
++		DWC_ERROR("device_register failed\n");
++		DWC_FREE(d);
++		return NULL;
++	}
++
++	return d;
++}
++
++static void free_wrapper(struct gadget_wrapper *d)
++{
++	if (d->driver) {
++		/* should have been done already by driver model core */
++		DWC_WARN("driver '%s' is still registered\n",
++			 d->driver->driver.name);
++		usb_gadget_unregister_driver(d->driver);
++	}
++
++	device_unregister(&d->gadget.dev);
++	DWC_FREE(d);
++}
++
++/**
++ * This function initialized the PCD portion of the driver.
++ *
++ */
++int pcd_init(dwc_bus_dev_t *_dev)
++{
++	dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev);
++	int retval = 0;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p) otg_dev=%p\n", __func__, _dev, otg_dev);
++
++	otg_dev->pcd = dwc_otg_pcd_init(otg_dev->core_if);
++
++	if (!otg_dev->pcd) {
++		DWC_ERROR("dwc_otg_pcd_init failed\n");
++		return -ENOMEM;
++	}
++
++	otg_dev->pcd->otg_dev = otg_dev;
++	gadget_wrapper = alloc_wrapper(_dev);
++
++	/*
++	 * Initialize EP structures
++	 */
++	gadget_add_eps(gadget_wrapper);
++	/*
++	 * Setup interupt handler
++	 */
++#ifdef PLATFORM_INTERFACE
++	DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n",
++                    platform_get_irq(_dev, 0));
++	retval = request_irq(platform_get_irq(_dev, 0), dwc_otg_pcd_irq,
++			     IRQF_SHARED, gadget_wrapper->gadget.name,
++			     otg_dev->pcd);
++	if (retval != 0) {
++		DWC_ERROR("request of irq%d failed\n",
++                          platform_get_irq(_dev, 0));
++		free_wrapper(gadget_wrapper);
++		return -EBUSY;
++	}
++#else
++	DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n",
++                    _dev->irq);
++	retval = request_irq(_dev->irq, dwc_otg_pcd_irq,
++			     IRQF_SHARED | IRQF_DISABLED,
++			     gadget_wrapper->gadget.name, otg_dev->pcd);
++	if (retval != 0) {
++		DWC_ERROR("request of irq%d failed\n", _dev->irq);
++		free_wrapper(gadget_wrapper);
++		return -EBUSY;
++	}
++#endif
++
++	dwc_otg_pcd_start(gadget_wrapper->pcd, &fops);
++
++	return retval;
++}
++
++/**
++ * Cleanup the PCD.
++ */
++void pcd_remove(dwc_bus_dev_t *_dev)
++{
++	dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev);
++	dwc_otg_pcd_t *pcd = otg_dev->pcd;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p) otg_dev %p\n", __func__, _dev, otg_dev);
++
++	/*
++	 * Free the IRQ
++	 */
++#ifdef PLATFORM_INTERFACE
++	free_irq(platform_get_irq(_dev, 0), pcd);
++#else
++	free_irq(_dev->irq, pcd);
++#endif
++	dwc_otg_pcd_remove(otg_dev->pcd);
++	free_wrapper(gadget_wrapper);
++	otg_dev->pcd = 0;
++}
++
++/**
++ * This function registers a gadget driver with the PCD.
++ *
++ * When a driver is successfully registered, it will receive control
++ * requests including set_configuration(), which enables non-control
++ * requests.  then usb traffic follows until a disconnect is reported.
++ * then a host may connect again, or the driver might get unbound.
++ *
++ * @param driver The driver being registered
++ * @param bind The bind function of gadget driver
++ */
++
++int usb_gadget_probe_driver(struct usb_gadget_driver *driver)
++{
++	int retval;
++
++	DWC_DEBUGPL(DBG_PCD, "registering gadget driver '%s'\n",
++		    driver->driver.name);
++
++	if (!driver || driver->max_speed == USB_SPEED_UNKNOWN ||
++	    !driver->bind ||
++	    !driver->unbind || !driver->disconnect || !driver->setup) {
++		DWC_DEBUGPL(DBG_PCDV, "EINVAL\n");
++		return -EINVAL;
++	}
++	if (gadget_wrapper == 0) {
++		DWC_DEBUGPL(DBG_PCDV, "ENODEV\n");
++		return -ENODEV;
++	}
++	if (gadget_wrapper->driver != 0) {
++		DWC_DEBUGPL(DBG_PCDV, "EBUSY (%p)\n", gadget_wrapper->driver);
++		return -EBUSY;
++	}
++
++	/* hook up the driver */
++	gadget_wrapper->driver = driver;
++	gadget_wrapper->gadget.dev.driver = &driver->driver;
++
++	DWC_DEBUGPL(DBG_PCD, "bind to driver %s\n", driver->driver.name);
++	retval = driver->bind(&gadget_wrapper->gadget, gadget_wrapper->driver);
++	if (retval) {
++		DWC_ERROR("bind to driver %s --> error %d\n",
++			  driver->driver.name, retval);
++		gadget_wrapper->driver = 0;
++		gadget_wrapper->gadget.dev.driver = 0;
++		return retval;
++	}
++	DWC_DEBUGPL(DBG_ANY, "registered gadget driver '%s'\n",
++		    driver->driver.name);
++	return 0;
++}
++EXPORT_SYMBOL(usb_gadget_probe_driver);
++
++/**
++ * This function unregisters a gadget driver
++ *
++ * @param driver The driver being unregistered
++ */
++int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
++{
++	//DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, _driver);
++
++	if (gadget_wrapper == 0) {
++		DWC_DEBUGPL(DBG_ANY, "%s Return(%d): s_pcd==0\n", __func__,
++			    -ENODEV);
++		return -ENODEV;
++	}
++	if (driver == 0 || driver != gadget_wrapper->driver) {
++		DWC_DEBUGPL(DBG_ANY, "%s Return(%d): driver?\n", __func__,
++			    -EINVAL);
++		return -EINVAL;
++	}
++
++	driver->unbind(&gadget_wrapper->gadget);
++	gadget_wrapper->driver = 0;
++
++	DWC_DEBUGPL(DBG_ANY, "unregistered driver '%s'\n", driver->driver.name);
++	return 0;
++}
++
++EXPORT_SYMBOL(usb_gadget_unregister_driver);
++
++#endif /* DWC_HOST_ONLY */
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_regs.h linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_regs.h
+--- linux-3.12.6/drivers/usb/host/dwc_otg/dwc_otg_regs.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/dwc_otg_regs.h	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,2550 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_regs.h $
++ * $Revision: #98 $
++ * $Date: 2012/08/10 $
++ * $Change: 2047372 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#ifndef __DWC_OTG_REGS_H__
++#define __DWC_OTG_REGS_H__
++
++#include "dwc_otg_core_if.h"
++
++/**
++ * @file
++ *
++ * This file contains the data structures for accessing the DWC_otg core registers.
++ *
++ * The application interfaces with the HS OTG core by reading from and
++ * writing to the Control and Status Register (CSR) space through the
++ * AHB Slave interface. These registers are 32 bits wide, and the
++ * addresses are 32-bit-block aligned.
++ * CSRs are classified as follows:
++ * - Core Global Registers
++ * - Device Mode Registers
++ * - Device Global Registers
++ * - Device Endpoint Specific Registers
++ * - Host Mode Registers
++ * - Host Global Registers
++ * - Host Port CSRs
++ * - Host Channel Specific Registers
++ *
++ * Only the Core Global registers can be accessed in both Device and
++ * Host modes. When the HS OTG core is operating in one mode, either
++ * Device or Host, the application must not access registers from the
++ * other mode. When the core switches from one mode to another, the
++ * registers in the new mode of operation must be reprogrammed as they
++ * would be after a power-on reset.
++ */
++
++/****************************************************************************/
++/** DWC_otg Core registers .
++ * The dwc_otg_core_global_regs structure defines the size
++ * and relative field offsets for the Core Global registers.
++ */
++typedef struct dwc_otg_core_global_regs {
++	/** OTG Control and Status Register.  <i>Offset: 000h</i> */
++	volatile uint32_t gotgctl;
++	/** OTG Interrupt Register.	 <i>Offset: 004h</i> */
++	volatile uint32_t gotgint;
++	/**Core AHB Configuration Register.	 <i>Offset: 008h</i> */
++	volatile uint32_t gahbcfg;
++
++#define DWC_GLBINTRMASK		0x0001
++#define DWC_DMAENABLE		0x0020
++#define DWC_NPTXEMPTYLVL_EMPTY	0x0080
++#define DWC_NPTXEMPTYLVL_HALFEMPTY	0x0000
++#define DWC_PTXEMPTYLVL_EMPTY	0x0100
++#define DWC_PTXEMPTYLVL_HALFEMPTY	0x0000
++
++	/**Core USB Configuration Register.	 <i>Offset: 00Ch</i> */
++	volatile uint32_t gusbcfg;
++	/**Core Reset Register.	 <i>Offset: 010h</i> */
++	volatile uint32_t grstctl;
++	/**Core Interrupt Register.	 <i>Offset: 014h</i> */
++	volatile uint32_t gintsts;
++	/**Core Interrupt Mask Register.  <i>Offset: 018h</i> */
++	volatile uint32_t gintmsk;
++	/**Receive Status Queue Read Register (Read Only).	<i>Offset: 01Ch</i> */
++	volatile uint32_t grxstsr;
++	/**Receive Status Queue Read & POP Register (Read Only).  <i>Offset: 020h</i>*/
++	volatile uint32_t grxstsp;
++	/**Receive FIFO Size Register.	<i>Offset: 024h</i> */
++	volatile uint32_t grxfsiz;
++	/**Non Periodic Transmit FIFO Size Register.  <i>Offset: 028h</i> */
++	volatile uint32_t gnptxfsiz;
++	/**Non Periodic Transmit FIFO/Queue Status Register (Read
++	 * Only). <i>Offset: 02Ch</i> */
++	volatile uint32_t gnptxsts;
++	/**I2C Access Register.	 <i>Offset: 030h</i> */
++	volatile uint32_t gi2cctl;
++	/**PHY Vendor Control Register.	 <i>Offset: 034h</i> */
++	volatile uint32_t gpvndctl;
++	/**General Purpose Input/Output Register.  <i>Offset: 038h</i> */
++	volatile uint32_t ggpio;
++	/**User ID Register.  <i>Offset: 03Ch</i> */
++	volatile uint32_t guid;
++	/**Synopsys ID Register (Read Only).  <i>Offset: 040h</i> */
++	volatile uint32_t gsnpsid;
++	/**User HW Config1 Register (Read Only).  <i>Offset: 044h</i> */
++	volatile uint32_t ghwcfg1;
++	/**User HW Config2 Register (Read Only).  <i>Offset: 048h</i> */
++	volatile uint32_t ghwcfg2;
++#define DWC_SLAVE_ONLY_ARCH 0
++#define DWC_EXT_DMA_ARCH 1
++#define DWC_INT_DMA_ARCH 2
++
++#define DWC_MODE_HNP_SRP_CAPABLE	0
++#define DWC_MODE_SRP_ONLY_CAPABLE	1
++#define DWC_MODE_NO_HNP_SRP_CAPABLE		2
++#define DWC_MODE_SRP_CAPABLE_DEVICE		3
++#define DWC_MODE_NO_SRP_CAPABLE_DEVICE	4
++#define DWC_MODE_SRP_CAPABLE_HOST	5
++#define DWC_MODE_NO_SRP_CAPABLE_HOST	6
++
++	/**User HW Config3 Register (Read Only).  <i>Offset: 04Ch</i> */
++	volatile uint32_t ghwcfg3;
++	/**User HW Config4 Register (Read Only).  <i>Offset: 050h</i>*/
++	volatile uint32_t ghwcfg4;
++	/** Core LPM Configuration register <i>Offset: 054h</i>*/
++	volatile uint32_t glpmcfg;
++	/** Global PowerDn Register <i>Offset: 058h</i> */
++	volatile uint32_t gpwrdn;
++	/** Global DFIFO SW Config Register  <i>Offset: 05Ch</i> */
++	volatile uint32_t gdfifocfg;
++	/** ADP Control Register  <i>Offset: 060h</i> */
++	volatile uint32_t adpctl;
++	/** Reserved  <i>Offset: 064h-0FFh</i> */
++	volatile uint32_t reserved39[39];
++	/** Host Periodic Transmit FIFO Size Register. <i>Offset: 100h</i> */
++	volatile uint32_t hptxfsiz;
++	/** Device Periodic Transmit FIFO#n Register if dedicated fifos are disabled,
++		otherwise Device Transmit FIFO#n Register.
++	 * <i>Offset: 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15 (1<=n<=15).</i> */
++	volatile uint32_t dtxfsiz[15];
++} dwc_otg_core_global_regs_t;
++
++/**
++ * This union represents the bit fields of the Core OTG Control
++ * and Status Register (GOTGCTL).  Set the bits using the bit
++ * fields then write the <i>d32</i> value to the register.
++ */
++typedef union gotgctl_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned sesreqscs:1;
++		unsigned sesreq:1;
++		unsigned vbvalidoven:1;
++		unsigned vbvalidovval:1;
++		unsigned avalidoven:1;
++		unsigned avalidovval:1;
++		unsigned bvalidoven:1;
++		unsigned bvalidovval:1;
++		unsigned hstnegscs:1;
++		unsigned hnpreq:1;
++		unsigned hstsethnpen:1;
++		unsigned devhnpen:1;
++		unsigned reserved12_15:4;
++		unsigned conidsts:1;
++		unsigned dbnctime:1;
++		unsigned asesvld:1;
++		unsigned bsesvld:1;
++		unsigned otgver:1;
++		unsigned reserved1:1;
++		unsigned multvalidbc:5;
++		unsigned chirpen:1;
++		unsigned reserved28_31:4;
++	} b;
++} gotgctl_data_t;
++
++/**
++ * This union represents the bit fields of the Core OTG Interrupt Register
++ * (GOTGINT).  Set/clear the bits using the bit fields then write the <i>d32</i>
++ * value to the register.
++ */
++typedef union gotgint_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Current Mode */
++		unsigned reserved0_1:2;
++
++		/** Session End Detected */
++		unsigned sesenddet:1;
++
++		unsigned reserved3_7:5;
++
++		/** Session Request Success Status Change */
++		unsigned sesreqsucstschng:1;
++		/** Host Negotiation Success Status Change */
++		unsigned hstnegsucstschng:1;
++
++		unsigned reserved10_16:7;
++
++		/** Host Negotiation Detected */
++		unsigned hstnegdet:1;
++		/** A-Device Timeout Change */
++		unsigned adevtoutchng:1;
++		/** Debounce Done */
++		unsigned debdone:1;
++		/** Multi-Valued input changed */
++		unsigned mvic:1;
++
++		unsigned reserved31_21:11;
++
++	} b;
++} gotgint_data_t;
++
++/**
++ * This union represents the bit fields of the Core AHB Configuration
++ * Register (GAHBCFG). Set/clear the bits using the bit fields then
++ * write the <i>d32</i> value to the register.
++ */
++typedef union gahbcfg_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned glblintrmsk:1;
++#define DWC_GAHBCFG_GLBINT_ENABLE		1
++
++		unsigned hburstlen:4;
++#define DWC_GAHBCFG_INT_DMA_BURST_SINGLE	0
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR		1
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR4		3
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR8		5
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR16	7
++
++		unsigned dmaenable:1;
++#define DWC_GAHBCFG_DMAENABLE			1
++		unsigned reserved:1;
++		unsigned nptxfemplvl_txfemplvl:1;
++		unsigned ptxfemplvl:1;
++#define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY		1
++#define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY	0
++		unsigned reserved9_20:12;
++		unsigned remmemsupp:1;
++		unsigned notialldmawrit:1;
++		unsigned ahbsingle:1;
++		unsigned reserved24_31:8;
++	} b;
++} gahbcfg_data_t;
++
++/**
++ * This union represents the bit fields of the Core USB Configuration
++ * Register (GUSBCFG). Set the bits using the bit fields then write
++ * the <i>d32</i> value to the register.
++ */
++typedef union gusbcfg_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned toutcal:3;
++		unsigned phyif:1;
++		unsigned ulpi_utmi_sel:1;
++		unsigned fsintf:1;
++		unsigned physel:1;
++		unsigned ddrsel:1;
++		unsigned srpcap:1;
++		unsigned hnpcap:1;
++		unsigned usbtrdtim:4;
++		unsigned reserved1:1;
++		unsigned phylpwrclksel:1;
++		unsigned otgutmifssel:1;
++		unsigned ulpi_fsls:1;
++		unsigned ulpi_auto_res:1;
++		unsigned ulpi_clk_sus_m:1;
++		unsigned ulpi_ext_vbus_drv:1;
++		unsigned ulpi_int_vbus_indicator:1;
++		unsigned term_sel_dl_pulse:1;
++		unsigned indicator_complement:1;
++		unsigned indicator_pass_through:1;
++		unsigned ulpi_int_prot_dis:1;
++		unsigned ic_usb_cap:1;
++		unsigned ic_traffic_pull_remove:1;
++		unsigned tx_end_delay:1;
++		unsigned force_host_mode:1;
++		unsigned force_dev_mode:1;
++		unsigned reserved31:1;
++	} b;
++} gusbcfg_data_t;
++
++/**
++ * This union represents the bit fields of the Core Reset Register
++ * (GRSTCTL).  Set/clear the bits using the bit fields then write the
++ * <i>d32</i> value to the register.
++ */
++typedef union grstctl_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Core Soft Reset (CSftRst) (Device and Host)
++		 *
++		 * The application can flush the control logic in the
++		 * entire core using this bit. This bit resets the
++		 * pipelines in the AHB Clock domain as well as the
++		 * PHY Clock domain.
++		 *
++		 * The state machines are reset to an IDLE state, the
++		 * control bits in the CSRs are cleared, all the
++		 * transmit FIFOs and the receive FIFO are flushed.
++		 *
++		 * The status mask bits that control the generation of
++		 * the interrupt, are cleared, to clear the
++		 * interrupt. The interrupt status bits are not
++		 * cleared, so the application can get the status of
++		 * any events that occurred in the core after it has
++		 * set this bit.
++		 *
++		 * Any transactions on the AHB are terminated as soon
++		 * as possible following the protocol. Any
++		 * transactions on the USB are terminated immediately.
++		 *
++		 * The configuration settings in the CSRs are
++		 * unchanged, so the software doesn't have to
++		 * reprogram these registers (Device
++		 * Configuration/Host Configuration/Core System
++		 * Configuration/Core PHY Configuration).
++		 *
++		 * The application can write to this bit, any time it
++		 * wants to reset the core. This is a self clearing
++		 * bit and the core clears this bit after all the
++		 * necessary logic is reset in the core, which may
++		 * take several clocks, depending on the current state
++		 * of the core.
++		 */
++		unsigned csftrst:1;
++		/** Hclk Soft Reset
++		 *
++		 * The application uses this bit to reset the control logic in
++		 * the AHB clock domain. Only AHB clock domain pipelines are
++		 * reset.
++		 */
++		unsigned hsftrst:1;
++		/** Host Frame Counter Reset (Host Only)<br>
++		 *
++		 * The application can reset the (micro)frame number
++		 * counter inside the core, using this bit. When the
++		 * (micro)frame counter is reset, the subsequent SOF
++		 * sent out by the core, will have a (micro)frame
++		 * number of 0.
++		 */
++		unsigned hstfrm:1;
++		/** In Token Sequence Learning Queue Flush
++		 * (INTknQFlsh) (Device Only)
++		 */
++		unsigned intknqflsh:1;
++		/** RxFIFO Flush (RxFFlsh) (Device and Host)
++		 *
++		 * The application can flush the entire Receive FIFO
++		 * using this bit. The application must first
++		 * ensure that the core is not in the middle of a
++		 * transaction. The application should write into
++		 * this bit, only after making sure that neither the
++		 * DMA engine is reading from the RxFIFO nor the MAC
++		 * is writing the data in to the FIFO. The
++		 * application should wait until the bit is cleared
++		 * before performing any other operations. This bit
++		 * will takes 8 clocks (slowest of PHY or AHB clock)
++		 * to clear.
++		 */
++		unsigned rxfflsh:1;
++		/** TxFIFO Flush (TxFFlsh) (Device and Host).
++		 *
++		 * This bit is used to selectively flush a single or
++		 * all transmit FIFOs. The application must first
++		 * ensure that the core is not in the middle of a
++		 * transaction. The application should write into
++		 * this bit, only after making sure that neither the
++		 * DMA engine is writing into the TxFIFO nor the MAC
++		 * is reading the data out of the FIFO. The
++		 * application should wait until the core clears this
++		 * bit, before performing any operations. This bit
++		 * will takes 8 clocks (slowest of PHY or AHB clock)
++		 * to clear.
++		 */
++		unsigned txfflsh:1;
++
++		/** TxFIFO Number (TxFNum) (Device and Host).
++		 *
++		 * This is the FIFO number which needs to be flushed,
++		 * using the TxFIFO Flush bit. This field should not
++		 * be changed until the TxFIFO Flush bit is cleared by
++		 * the core.
++		 *	 - 0x0 : Non Periodic TxFIFO Flush
++		 *	 - 0x1 : Periodic TxFIFO #1 Flush in device mode
++		 *	   or Periodic TxFIFO in host mode
++		 *	 - 0x2 : Periodic TxFIFO #2 Flush in device mode.
++		 *	 - ...
++		 *	 - 0xF : Periodic TxFIFO #15 Flush in device mode
++		 *	 - 0x10: Flush all the Transmit NonPeriodic and
++		 *	   Transmit Periodic FIFOs in the core
++		 */
++		unsigned txfnum:5;
++		/** Reserved */
++		unsigned reserved11_29:19;
++		/** DMA Request Signal.	 Indicated DMA request is in
++		 * probress. Used for debug purpose. */
++		unsigned dmareq:1;
++		/** AHB Master Idle.  Indicates the AHB Master State
++		 * Machine is in IDLE condition. */
++		unsigned ahbidle:1;
++	} b;
++} grstctl_t;
++
++/**
++ * This union represents the bit fields of the Core Interrupt Mask
++ * Register (GINTMSK). Set/clear the bits using the bit fields then
++ * write the <i>d32</i> value to the register.
++ */
++typedef union gintmsk_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned reserved0:1;
++		unsigned modemismatch:1;
++		unsigned otgintr:1;
++		unsigned sofintr:1;
++		unsigned rxstsqlvl:1;
++		unsigned nptxfempty:1;
++		unsigned ginnakeff:1;
++		unsigned goutnakeff:1;
++		unsigned ulpickint:1;
++		unsigned i2cintr:1;
++		unsigned erlysuspend:1;
++		unsigned usbsuspend:1;
++		unsigned usbreset:1;
++		unsigned enumdone:1;
++		unsigned isooutdrop:1;
++		unsigned eopframe:1;
++		unsigned restoredone:1;
++		unsigned epmismatch:1;
++		unsigned inepintr:1;
++		unsigned outepintr:1;
++		unsigned incomplisoin:1;
++		unsigned incomplisoout:1;
++		unsigned fetsusp:1;
++		unsigned resetdet:1;
++		unsigned portintr:1;
++		unsigned hcintr:1;
++		unsigned ptxfempty:1;
++		unsigned lpmtranrcvd:1;
++		unsigned conidstschng:1;
++		unsigned disconnect:1;
++		unsigned sessreqintr:1;
++		unsigned wkupintr:1;
++	} b;
++} gintmsk_data_t;
++/**
++ * This union represents the bit fields of the Core Interrupt Register
++ * (GINTSTS).  Set/clear the bits using the bit fields then write the
++ * <i>d32</i> value to the register.
++ */
++typedef union gintsts_data {
++	/** raw register data */
++	uint32_t d32;
++#define DWC_SOF_INTR_MASK 0x0008
++	/** register bits */
++	struct {
++#define DWC_HOST_MODE 1
++		unsigned curmode:1;
++		unsigned modemismatch:1;
++		unsigned otgintr:1;
++		unsigned sofintr:1;
++		unsigned rxstsqlvl:1;
++		unsigned nptxfempty:1;
++		unsigned ginnakeff:1;
++		unsigned goutnakeff:1;
++		unsigned ulpickint:1;
++		unsigned i2cintr:1;
++		unsigned erlysuspend:1;
++		unsigned usbsuspend:1;
++		unsigned usbreset:1;
++		unsigned enumdone:1;
++		unsigned isooutdrop:1;
++		unsigned eopframe:1;
++		unsigned restoredone:1;
++		unsigned epmismatch:1;
++		unsigned inepint:1;
++		unsigned outepintr:1;
++		unsigned incomplisoin:1;
++		unsigned incomplisoout:1;
++		unsigned fetsusp:1;
++		unsigned resetdet:1;
++		unsigned portintr:1;
++		unsigned hcintr:1;
++		unsigned ptxfempty:1;
++		unsigned lpmtranrcvd:1;
++		unsigned conidstschng:1;
++		unsigned disconnect:1;
++		unsigned sessreqintr:1;
++		unsigned wkupintr:1;
++	} b;
++} gintsts_data_t;
++
++/**
++ * This union represents the bit fields in the Device Receive Status Read and
++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
++ * element then read out the bits using the <i>b</i>it elements.
++ */
++typedef union device_grxsts_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned epnum:4;
++		unsigned bcnt:11;
++		unsigned dpid:2;
++
++#define DWC_STS_DATA_UPDT		0x2	// OUT Data Packet
++#define DWC_STS_XFER_COMP		0x3	// OUT Data Transfer Complete
++
++#define DWC_DSTS_GOUT_NAK		0x1	// Global OUT NAK
++#define DWC_DSTS_SETUP_COMP		0x4	// Setup Phase Complete
++#define DWC_DSTS_SETUP_UPDT 0x6	// SETUP Packet
++		unsigned pktsts:4;
++		unsigned fn:4;
++		unsigned reserved25_31:7;
++	} b;
++} device_grxsts_data_t;
++
++/**
++ * This union represents the bit fields in the Host Receive Status Read and
++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
++ * element then read out the bits using the <i>b</i>it elements.
++ */
++typedef union host_grxsts_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned chnum:4;
++		unsigned bcnt:11;
++		unsigned dpid:2;
++
++		unsigned pktsts:4;
++#define DWC_GRXSTS_PKTSTS_IN			  0x2
++#define DWC_GRXSTS_PKTSTS_IN_XFER_COMP	  0x3
++#define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5
++#define DWC_GRXSTS_PKTSTS_CH_HALTED		  0x7
++
++		unsigned reserved21_31:11;
++	} b;
++} host_grxsts_data_t;
++
++/**
++ * This union represents the bit fields in the FIFO Size Registers (HPTXFSIZ,
++ * GNPTXFSIZ, DPTXFSIZn, DIEPTXFn). Read the register into the <i>d32</i> element
++ * then read out the bits using the <i>b</i>it elements.
++ */
++typedef union fifosize_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned startaddr:16;
++		unsigned depth:16;
++	} b;
++} fifosize_data_t;
++
++/**
++ * This union represents the bit fields in the Non-Periodic Transmit
++ * FIFO/Queue Status Register (GNPTXSTS). Read the register into the
++ * <i>d32</i> element then read out the bits using the <i>b</i>it
++ * elements.
++ */
++typedef union gnptxsts_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned nptxfspcavail:16;
++		unsigned nptxqspcavail:8;
++		/** Top of the Non-Periodic Transmit Request Queue
++		 *	- bit 24 - Terminate (Last entry for the selected
++		 *	  channel/EP)
++		 *	- bits 26:25 - Token Type
++		 *	  - 2'b00 - IN/OUT
++		 *	  - 2'b01 - Zero Length OUT
++		 *	  - 2'b10 - PING/Complete Split
++		 *	  - 2'b11 - Channel Halt
++		 *	- bits 30:27 - Channel/EP Number
++		 */
++		unsigned nptxqtop_terminate:1;
++		unsigned nptxqtop_token:2;
++		unsigned nptxqtop_chnep:4;
++		unsigned reserved:1;
++	} b;
++} gnptxsts_data_t;
++
++/**
++ * This union represents the bit fields in the Transmit
++ * FIFO Status Register (DTXFSTS). Read the register into the
++ * <i>d32</i> element then read out the bits using the <i>b</i>it
++ * elements.
++ */
++typedef union dtxfsts_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned txfspcavail:16;
++		unsigned reserved:16;
++	} b;
++} dtxfsts_data_t;
++
++/**
++ * This union represents the bit fields in the I2C Control Register
++ * (I2CCTL). Read the register into the <i>d32</i> element then read out the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union gi2cctl_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned rwdata:8;
++		unsigned regaddr:8;
++		unsigned addr:7;
++		unsigned i2cen:1;
++		unsigned ack:1;
++		unsigned i2csuspctl:1;
++		unsigned i2cdevaddr:2;
++		unsigned i2cdatse0:1;
++		unsigned reserved:1;
++		unsigned rw:1;
++		unsigned bsydne:1;
++	} b;
++} gi2cctl_data_t;
++
++/**
++ * This union represents the bit fields in the PHY Vendor Control Register
++ * (GPVNDCTL). Read the register into the <i>d32</i> element then read out the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union gpvndctl_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned regdata:8;
++		unsigned vctrl:8;
++		unsigned regaddr16_21:6;
++		unsigned regwr:1;
++		unsigned reserved23_24:2;
++		unsigned newregreq:1;
++		unsigned vstsbsy:1;
++		unsigned vstsdone:1;
++		unsigned reserved28_30:3;
++		unsigned disulpidrvr:1;
++	} b;
++} gpvndctl_data_t;
++
++/**
++ * This union represents the bit fields in the General Purpose
++ * Input/Output Register (GGPIO).
++ * Read the register into the <i>d32</i> element then read out the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union ggpio_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned gpi:16;
++		unsigned gpo:16;
++	} b;
++} ggpio_data_t;
++
++/**
++ * This union represents the bit fields in the User ID Register
++ * (GUID). Read the register into the <i>d32</i> element then read out the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union guid_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned rwdata:32;
++	} b;
++} guid_data_t;
++
++/**
++ * This union represents the bit fields in the Synopsys ID Register
++ * (GSNPSID). Read the register into the <i>d32</i> element then read out the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union gsnpsid_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned rwdata:32;
++	} b;
++} gsnpsid_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config1
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg1_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned ep_dir0:2;
++		unsigned ep_dir1:2;
++		unsigned ep_dir2:2;
++		unsigned ep_dir3:2;
++		unsigned ep_dir4:2;
++		unsigned ep_dir5:2;
++		unsigned ep_dir6:2;
++		unsigned ep_dir7:2;
++		unsigned ep_dir8:2;
++		unsigned ep_dir9:2;
++		unsigned ep_dir10:2;
++		unsigned ep_dir11:2;
++		unsigned ep_dir12:2;
++		unsigned ep_dir13:2;
++		unsigned ep_dir14:2;
++		unsigned ep_dir15:2;
++	} b;
++} hwcfg1_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config2
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg2_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/* GHWCFG2 */
++		unsigned op_mode:3;
++#define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0
++#define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1
++#define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2
++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3
++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4
++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5
++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6
++
++		unsigned architecture:2;
++		unsigned point2point:1;
++		unsigned hs_phy_type:2;
++#define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0
++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1
++#define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2
++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3
++
++		unsigned fs_phy_type:2;
++		unsigned num_dev_ep:4;
++		unsigned num_host_chan:4;
++		unsigned perio_ep_supported:1;
++		unsigned dynamic_fifo:1;
++		unsigned multi_proc_int:1;
++		unsigned reserved21:1;
++		unsigned nonperio_tx_q_depth:2;
++		unsigned host_perio_tx_q_depth:2;
++		unsigned dev_token_q_depth:5;
++		unsigned otg_enable_ic_usb:1;
++	} b;
++} hwcfg2_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config3
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg3_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/* GHWCFG3 */
++		unsigned xfer_size_cntr_width:4;
++		unsigned packet_size_cntr_width:3;
++		unsigned otg_func:1;
++		unsigned i2c:1;
++		unsigned vendor_ctrl_if:1;
++		unsigned optional_features:1;
++		unsigned synch_reset_type:1;
++		unsigned adp_supp:1;
++		unsigned otg_enable_hsic:1;
++		unsigned bc_support:1;
++		unsigned otg_lpm_en:1;
++		unsigned dfifo_depth:16;
++	} b;
++} hwcfg3_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config4
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg4_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned num_dev_perio_in_ep:4;
++		unsigned power_optimiz:1;
++		unsigned min_ahb_freq:1;
++		unsigned hiber:1;
++		unsigned xhiber:1;
++		unsigned reserved:6;
++		unsigned utmi_phy_data_width:2;
++		unsigned num_dev_mode_ctrl_ep:4;
++		unsigned iddig_filt_en:1;
++		unsigned vbus_valid_filt_en:1;
++		unsigned a_valid_filt_en:1;
++		unsigned b_valid_filt_en:1;
++		unsigned session_end_filt_en:1;
++		unsigned ded_fifo_en:1;
++		unsigned num_in_eps:4;
++		unsigned desc_dma:1;
++		unsigned desc_dma_dyn:1;
++	} b;
++} hwcfg4_data_t;
++
++/**
++ * This union represents the bit fields of the Core LPM Configuration
++ * Register (GLPMCFG). Set the bits using bit fields then write
++ * the <i>d32</i> value to the register.
++ */
++typedef union glpmctl_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** LPM-Capable (LPMCap) (Device and Host)
++		 * The application uses this bit to control
++		 * the DWC_otg core LPM capabilities.
++		 */
++		unsigned lpm_cap_en:1;
++		/** LPM response programmed by application (AppL1Res) (Device)
++		 * Handshake response to LPM token pre-programmed
++		 * by device application software.
++		 */
++		unsigned appl_resp:1;
++		/** Host Initiated Resume Duration (HIRD) (Device and Host)
++		 * In Host mode this field indicates the value of HIRD
++		 * to be sent in an LPM transaction.
++		 * In Device mode this field is updated with the
++		 * Received LPM Token HIRD bmAttribute
++		 * when an ACK/NYET/STALL response is sent
++		 * to an LPM transaction.
++		 */
++		unsigned hird:4;
++		/** RemoteWakeEnable (bRemoteWake) (Device and Host)
++		 * In Host mode this bit indicates the value of remote
++		 * wake up to be sent in wIndex field of LPM transaction.
++		 * In Device mode this field is updated with the
++		 * Received LPM Token bRemoteWake bmAttribute
++		 * when an ACK/NYET/STALL response is sent
++		 * to an LPM transaction.
++		 */
++		unsigned rem_wkup_en:1;
++		/** Enable utmi_sleep_n (EnblSlpM) (Device and Host)
++		 * The application uses this bit to control
++		 * the utmi_sleep_n assertion to the PHY when in L1 state.
++		 */
++		unsigned en_utmi_sleep:1;
++		/** HIRD Threshold (HIRD_Thres) (Device and Host)
++		 */
++		unsigned hird_thres:5;
++		/** LPM Response (CoreL1Res) (Device and Host)
++		 * In Host mode this bit contains handsake response to
++		 * LPM transaction.
++		 * In Device mode the response of the core to
++		 * LPM transaction received is reflected in these two bits.
++			- 0x0 : ERROR (No handshake response)
++			- 0x1 : STALL
++			- 0x2 : NYET
++			- 0x3 : ACK
++		 */
++		unsigned lpm_resp:2;
++		/** Port Sleep Status (SlpSts) (Device and Host)
++		 * This bit is set as long as a Sleep condition
++		 * is present on the USB bus.
++		 */
++		unsigned prt_sleep_sts:1;
++		/** Sleep State Resume OK (L1ResumeOK) (Device and Host)
++		 * Indicates that the application or host
++		 * can start resume from Sleep state.
++		 */
++		unsigned sleep_state_resumeok:1;
++		/** LPM channel Index (LPM_Chnl_Indx) (Host)
++		 * The channel number on which the LPM transaction
++		 * has to be applied while sending
++		 * an LPM transaction to the local device.
++		 */
++		unsigned lpm_chan_index:4;
++		/** LPM Retry Count (LPM_Retry_Cnt) (Host)
++		 * Number host retries that would be performed
++		 * if the device response was not valid response.
++		 */
++		unsigned retry_count:3;
++		/** Send LPM Transaction (SndLPM) (Host)
++		 * When set by application software,
++		 * an LPM transaction containing two tokens
++		 * is sent.
++		 */
++		unsigned send_lpm:1;
++		/** LPM Retry status (LPM_RetryCnt_Sts) (Host)
++		 * Number of LPM Host Retries still remaining
++		 * to be transmitted for the current LPM sequence
++		 */
++		unsigned retry_count_sts:3;
++		unsigned reserved28_29:2;
++		/** In host mode once this bit is set, the host
++		 * configures to drive the HSIC Idle state on the bus.
++		 * It then waits for the  device to initiate the Connect sequence.
++		 * In device mode once this bit is set, the device waits for
++		 * the HSIC Idle line state on the bus. Upon receving the Idle
++		 * line state, it initiates the HSIC Connect sequence.
++		 */
++		unsigned hsic_connect:1;
++		/** This bit overrides and functionally inverts
++		 * the if_select_hsic input port signal.
++		 */
++		unsigned inv_sel_hsic:1;
++	} b;
++} glpmcfg_data_t;
++
++/**
++ * This union represents the bit fields of the Core ADP Timer, Control and
++ * Status Register (ADPTIMCTLSTS). Set the bits using bit fields then write
++ * the <i>d32</i> value to the register.
++ */
++typedef union adpctl_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Probe Discharge (PRB_DSCHG)
++		 *  These bits set the times for TADP_DSCHG.
++		 *  These bits are defined as follows:
++		 *  2'b00 - 4 msec
++		 *  2'b01 - 8 msec
++		 *  2'b10 - 16 msec
++		 *  2'b11 - 32 msec
++		 */
++		unsigned prb_dschg:2;
++		/** Probe Delta (PRB_DELTA)
++		 *  These bits set the resolution for RTIM   value.
++		 *  The bits are defined in units of 32 kHz clock cycles as follows:
++		 *  2'b00  -  1 cycles
++		 *  2'b01  -  2 cycles
++		 *  2'b10 -  3 cycles
++		 *  2'b11 - 4 cycles
++		 *  For example if this value is chosen to 2'b01, it means that RTIM
++		 *  increments for every 3(three) 32Khz clock cycles.
++		 */
++		unsigned prb_delta:2;
++		/** Probe Period (PRB_PER)
++		 *  These bits sets the TADP_PRD as shown in Figure 4 as follows:
++		 *  2'b00  -  0.625 to 0.925 sec (typical 0.775 sec)
++		 *  2'b01  -  1.25 to 1.85 sec (typical 1.55 sec)
++		 *  2'b10  -  1.9 to 2.6 sec (typical 2.275 sec)
++		 *  2'b11  -  Reserved
++		 */
++		unsigned prb_per:2;
++		/** These bits capture the latest time it took for VBUS to ramp from
++		 *  VADP_SINK to VADP_PRB.
++		 *  0x000  -  1 cycles
++		 *  0x001  -  2 cycles
++		 *  0x002  -  3 cycles
++		 *  etc
++		 *  0x7FF  -  2048 cycles
++		 *  A time of 1024 cycles at 32 kHz corresponds to a time of 32 msec.
++		*/
++		unsigned rtim:11;
++		/** Enable Probe (EnaPrb)
++		 *  When programmed to 1'b1, the core performs a probe operation.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned enaprb:1;
++		/** Enable Sense (EnaSns)
++		 *  When programmed to 1'b1, the core performs a Sense operation.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned enasns:1;
++		/** ADP Reset (ADPRes)
++		 *  When set, ADP controller is reset.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned adpres:1;
++		/** ADP Enable (ADPEn)
++		 *  When set, the core performs either ADP probing or sensing
++		 *  based on EnaPrb or EnaSns.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned adpen:1;
++		/** ADP Probe Interrupt (ADP_PRB_INT)
++		 *  When this bit is set, it means that the VBUS
++		 *  voltage is greater than VADP_PRB or VADP_PRB is reached.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned adp_prb_int:1;
++		/**
++		 *  ADP Sense Interrupt (ADP_SNS_INT)
++		 *  When this bit is set, it means that the VBUS voltage is greater than
++		 *  VADP_SNS value or VADP_SNS is reached.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned adp_sns_int:1;
++		/** ADP Tomeout Interrupt (ADP_TMOUT_INT)
++		 *  This bit is relevant only for an ADP probe.
++		 *  When this bit is set, it means that the ramp time has
++		 *  completed ie ADPCTL.RTIM has reached its terminal value
++		 *  of 0x7FF.  This is a debug feature that allows software
++		 *  to read the ramp time after each cycle.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned adp_tmout_int:1;
++		/** ADP Probe Interrupt Mask (ADP_PRB_INT_MSK)
++		 *  When this bit is set, it unmasks the interrupt due to ADP_PRB_INT.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned adp_prb_int_msk:1;
++		/** ADP Sense Interrupt Mask (ADP_SNS_INT_MSK)
++		 *  When this bit is set, it unmasks the interrupt due to ADP_SNS_INT.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned adp_sns_int_msk:1;
++		/** ADP Timoeout Interrupt Mask (ADP_TMOUT_MSK)
++		 *  When this bit is set, it unmasks the interrupt due to ADP_TMOUT_INT.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned adp_tmout_int_msk:1;
++		/** Access Request
++		 * 2'b00 - Read/Write Valid (updated by the core)
++		 * 2'b01 - Read
++		 * 2'b00 - Write
++		 * 2'b00 - Reserved
++		 */
++		unsigned ar:2;
++		 /** Reserved */
++		unsigned reserved29_31:3;
++	} b;
++} adpctl_data_t;
++
++////////////////////////////////////////////
++// Device Registers
++/**
++ * Device Global Registers. <i>Offsets 800h-BFFh</i>
++ *
++ * The following structures define the size and relative field offsets
++ * for the Device Mode Registers.
++ *
++ * <i>These registers are visible only in Device mode and must not be
++ * accessed in Host mode, as the results are unknown.</i>
++ */
++typedef struct dwc_otg_dev_global_regs {
++	/** Device Configuration Register. <i>Offset 800h</i> */
++	volatile uint32_t dcfg;
++	/** Device Control Register. <i>Offset: 804h</i> */
++	volatile uint32_t dctl;
++	/** Device Status Register (Read Only). <i>Offset: 808h</i> */
++	volatile uint32_t dsts;
++	/** Reserved. <i>Offset: 80Ch</i> */
++	uint32_t unused;
++	/** Device IN Endpoint Common Interrupt Mask
++	 * Register. <i>Offset: 810h</i> */
++	volatile uint32_t diepmsk;
++	/** Device OUT Endpoint Common Interrupt Mask
++	 * Register. <i>Offset: 814h</i> */
++	volatile uint32_t doepmsk;
++	/** Device All Endpoints Interrupt Register.  <i>Offset: 818h</i> */
++	volatile uint32_t daint;
++	/** Device All Endpoints Interrupt Mask Register.  <i>Offset:
++	 * 81Ch</i> */
++	volatile uint32_t daintmsk;
++	/** Device IN Token Queue Read Register-1 (Read Only).
++	 * <i>Offset: 820h</i> */
++	volatile uint32_t dtknqr1;
++	/** Device IN Token Queue Read Register-2 (Read Only).
++	 * <i>Offset: 824h</i> */
++	volatile uint32_t dtknqr2;
++	/** Device VBUS	 discharge Register.  <i>Offset: 828h</i> */
++	volatile uint32_t dvbusdis;
++	/** Device VBUS Pulse Register.	 <i>Offset: 82Ch</i> */
++	volatile uint32_t dvbuspulse;
++	/** Device IN Token Queue Read Register-3 (Read Only). /
++	 *	Device Thresholding control register (Read/Write)
++	 * <i>Offset: 830h</i> */
++	volatile uint32_t dtknqr3_dthrctl;
++	/** Device IN Token Queue Read Register-4 (Read Only). /
++	 *	Device IN EPs empty Inr. Mask Register (Read/Write)
++	 * <i>Offset: 834h</i> */
++	volatile uint32_t dtknqr4_fifoemptymsk;
++	/** Device Each Endpoint Interrupt Register (Read Only). /
++	 * <i>Offset: 838h</i> */
++	volatile uint32_t deachint;
++	/** Device Each Endpoint Interrupt mask Register (Read/Write). /
++	 * <i>Offset: 83Ch</i> */
++	volatile uint32_t deachintmsk;
++	/** Device Each In Endpoint Interrupt mask Register (Read/Write). /
++	 * <i>Offset: 840h</i> */
++	volatile uint32_t diepeachintmsk[MAX_EPS_CHANNELS];
++	/** Device Each Out Endpoint Interrupt mask Register (Read/Write). /
++	 * <i>Offset: 880h</i> */
++	volatile uint32_t doepeachintmsk[MAX_EPS_CHANNELS];
++} dwc_otg_device_global_regs_t;
++
++/**
++ * This union represents the bit fields in the Device Configuration
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.  Write the
++ * <i>d32</i> member to the dcfg register.
++ */
++typedef union dcfg_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Device Speed */
++		unsigned devspd:2;
++		/** Non Zero Length Status OUT Handshake */
++		unsigned nzstsouthshk:1;
++#define DWC_DCFG_SEND_STALL 1
++
++		unsigned ena32khzs:1;
++		/** Device Addresses */
++		unsigned devaddr:7;
++		/** Periodic Frame Interval */
++		unsigned perfrint:2;
++#define DWC_DCFG_FRAME_INTERVAL_80 0
++#define DWC_DCFG_FRAME_INTERVAL_85 1
++#define DWC_DCFG_FRAME_INTERVAL_90 2
++#define DWC_DCFG_FRAME_INTERVAL_95 3
++
++		/** Enable Device OUT NAK for bulk in DDMA mode */
++		unsigned endevoutnak:1;
++
++		unsigned reserved14_17:4;
++		/** In Endpoint Mis-match count */
++		unsigned epmscnt:5;
++		/** Enable Descriptor DMA in Device mode */
++		unsigned descdma:1;
++		unsigned perschintvl:2;
++		unsigned resvalid:6;
++	} b;
++} dcfg_data_t;
++
++/**
++ * This union represents the bit fields in the Device Control
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union dctl_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Remote Wakeup */
++		unsigned rmtwkupsig:1;
++		/** Soft Disconnect */
++		unsigned sftdiscon:1;
++		/** Global Non-Periodic IN NAK Status */
++		unsigned gnpinnaksts:1;
++		/** Global OUT NAK Status */
++		unsigned goutnaksts:1;
++		/** Test Control */
++		unsigned tstctl:3;
++		/** Set Global Non-Periodic IN NAK */
++		unsigned sgnpinnak:1;
++		/** Clear Global Non-Periodic IN NAK */
++		unsigned cgnpinnak:1;
++		/** Set Global OUT NAK */
++		unsigned sgoutnak:1;
++		/** Clear Global OUT NAK */
++		unsigned cgoutnak:1;
++		/** Power-On Programming Done */
++		unsigned pwronprgdone:1;
++		/** Reserved */
++		unsigned reserved:1;
++		/** Global Multi Count */
++		unsigned gmc:2;
++		/** Ignore Frame Number for ISOC EPs */
++		unsigned ifrmnum:1;
++		/** NAK on Babble */
++		unsigned nakonbble:1;
++		/** Enable Continue on BNA */
++		unsigned encontonbna:1;
++
++		unsigned reserved18_31:14;
++	} b;
++} dctl_data_t;
++
++/**
++ * This union represents the bit fields in the Device Status
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union dsts_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Suspend Status */
++		unsigned suspsts:1;
++		/** Enumerated Speed */
++		unsigned enumspd:2;
++#define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0
++#define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1
++#define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ		   2
++#define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ		   3
++		/** Erratic Error */
++		unsigned errticerr:1;
++		unsigned reserved4_7:4;
++		/** Frame or Microframe Number of the received SOF */
++		unsigned soffn:14;
++		unsigned reserved22_31:10;
++	} b;
++} dsts_data_t;
++
++/**
++ * This union represents the bit fields in the Device IN EP Interrupt
++ * Register and the Device IN EP Common Mask Register.
++ *
++ * - Read the register into the <i>d32</i> member then set/clear the
++ *	 bits using the <i>b</i>it elements.
++ */
++typedef union diepint_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Transfer complete mask */
++		unsigned xfercompl:1;
++		/** Endpoint disable mask */
++		unsigned epdisabled:1;
++		/** AHB Error mask */
++		unsigned ahberr:1;
++		/** TimeOUT Handshake mask (non-ISOC EPs) */
++		unsigned timeout:1;
++		/** IN Token received with TxF Empty mask */
++		unsigned intktxfemp:1;
++		/** IN Token Received with EP mismatch mask */
++		unsigned intknepmis:1;
++		/** IN Endpoint NAK Effective mask */
++		unsigned inepnakeff:1;
++		/** Reserved */
++		unsigned emptyintr:1;
++
++		unsigned txfifoundrn:1;
++
++		/** BNA Interrupt mask */
++		unsigned bna:1;
++
++		unsigned reserved10_12:3;
++		/** BNA Interrupt mask */
++		unsigned nak:1;
++
++		unsigned reserved14_31:18;
++	} b;
++} diepint_data_t;
++
++/**
++ * This union represents the bit fields in the Device IN EP
++ * Common/Dedicated Interrupt Mask Register.
++ */
++typedef union diepint_data diepmsk_data_t;
++
++/**
++ * This union represents the bit fields in the Device OUT EP Interrupt
++ * Registerand Device OUT EP Common Interrupt Mask Register.
++ *
++ * - Read the register into the <i>d32</i> member then set/clear the
++ *	 bits using the <i>b</i>it elements.
++ */
++typedef union doepint_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Transfer complete */
++		unsigned xfercompl:1;
++		/** Endpoint disable  */
++		unsigned epdisabled:1;
++		/** AHB Error */
++		unsigned ahberr:1;
++		/** Setup Phase Done (contorl EPs) */
++		unsigned setup:1;
++		/** OUT Token Received when Endpoint Disabled */
++		unsigned outtknepdis:1;
++
++		unsigned stsphsercvd:1;
++		/** Back-to-Back SETUP Packets Received */
++		unsigned back2backsetup:1;
++
++		unsigned reserved7:1;
++		/** OUT packet Error */
++		unsigned outpkterr:1;
++		/** BNA Interrupt */
++		unsigned bna:1;
++
++		unsigned reserved10:1;
++		/** Packet Drop Status */
++		unsigned pktdrpsts:1;
++		/** Babble Interrupt */
++		unsigned babble:1;
++		/** NAK Interrupt */
++		unsigned nak:1;
++		/** NYET Interrupt */
++		unsigned nyet:1;
++		/** Bit indicating setup packet received */
++		unsigned sr:1;
++
++		unsigned reserved16_31:16;
++	} b;
++} doepint_data_t;
++
++/**
++ * This union represents the bit fields in the Device OUT EP
++ * Common/Dedicated Interrupt Mask Register.
++ */
++typedef union doepint_data doepmsk_data_t;
++
++/**
++ * This union represents the bit fields in the Device All EP Interrupt
++ * and Mask Registers.
++ * - Read the register into the <i>d32</i> member then set/clear the
++ *	 bits using the <i>b</i>it elements.
++ */
++typedef union daint_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** IN Endpoint bits */
++		unsigned in:16;
++		/** OUT Endpoint bits */
++		unsigned out:16;
++	} ep;
++	struct {
++		/** IN Endpoint bits */
++		unsigned inep0:1;
++		unsigned inep1:1;
++		unsigned inep2:1;
++		unsigned inep3:1;
++		unsigned inep4:1;
++		unsigned inep5:1;
++		unsigned inep6:1;
++		unsigned inep7:1;
++		unsigned inep8:1;
++		unsigned inep9:1;
++		unsigned inep10:1;
++		unsigned inep11:1;
++		unsigned inep12:1;
++		unsigned inep13:1;
++		unsigned inep14:1;
++		unsigned inep15:1;
++		/** OUT Endpoint bits */
++		unsigned outep0:1;
++		unsigned outep1:1;
++		unsigned outep2:1;
++		unsigned outep3:1;
++		unsigned outep4:1;
++		unsigned outep5:1;
++		unsigned outep6:1;
++		unsigned outep7:1;
++		unsigned outep8:1;
++		unsigned outep9:1;
++		unsigned outep10:1;
++		unsigned outep11:1;
++		unsigned outep12:1;
++		unsigned outep13:1;
++		unsigned outep14:1;
++		unsigned outep15:1;
++	} b;
++} daint_data_t;
++
++/**
++ * This union represents the bit fields in the Device IN Token Queue
++ * Read Registers.
++ * - Read the register into the <i>d32</i> member.
++ * - READ-ONLY Register
++ */
++typedef union dtknq1_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** In Token Queue Write Pointer */
++		unsigned intknwptr:5;
++		/** Reserved */
++		unsigned reserved05_06:2;
++		/** write pointer has wrapped. */
++		unsigned wrap_bit:1;
++		/** EP Numbers of IN Tokens 0 ... 4 */
++		unsigned epnums0_5:24;
++	} b;
++} dtknq1_data_t;
++
++/**
++ * This union represents Threshold control Register
++ * - Read and write the register into the <i>d32</i> member.
++ * - READ-WRITABLE Register
++ */
++typedef union dthrctl_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** non ISO Tx Thr. Enable */
++		unsigned non_iso_thr_en:1;
++		/** ISO Tx Thr. Enable */
++		unsigned iso_thr_en:1;
++		/** Tx Thr. Length */
++		unsigned tx_thr_len:9;
++		/** AHB Threshold ratio */
++		unsigned ahb_thr_ratio:2;
++		/** Reserved */
++		unsigned reserved13_15:3;
++		/** Rx Thr. Enable */
++		unsigned rx_thr_en:1;
++		/** Rx Thr. Length */
++		unsigned rx_thr_len:9;
++		unsigned reserved26:1;
++		/** Arbiter Parking Enable*/
++		unsigned arbprken:1;
++		/** Reserved */
++		unsigned reserved28_31:4;
++	} b;
++} dthrctl_data_t;
++
++/**
++ * Device Logical IN Endpoint-Specific Registers. <i>Offsets
++ * 900h-AFCh</i>
++ *
++ * There will be one set of endpoint registers per logical endpoint
++ * implemented.
++ *
++ * <i>These registers are visible only in Device mode and must not be
++ * accessed in Host mode, as the results are unknown.</i>
++ */
++typedef struct dwc_otg_dev_in_ep_regs {
++	/** Device IN Endpoint Control Register. <i>Offset:900h +
++	 * (ep_num * 20h) + 00h</i> */
++	volatile uint32_t diepctl;
++	/** Reserved. <i>Offset:900h + (ep_num * 20h) + 04h</i> */
++	uint32_t reserved04;
++	/** Device IN Endpoint Interrupt Register. <i>Offset:900h +
++	 * (ep_num * 20h) + 08h</i> */
++	volatile uint32_t diepint;
++	/** Reserved. <i>Offset:900h + (ep_num * 20h) + 0Ch</i> */
++	uint32_t reserved0C;
++	/** Device IN Endpoint Transfer Size
++	 * Register. <i>Offset:900h + (ep_num * 20h) + 10h</i> */
++	volatile uint32_t dieptsiz;
++	/** Device IN Endpoint DMA Address Register. <i>Offset:900h +
++	 * (ep_num * 20h) + 14h</i> */
++	volatile uint32_t diepdma;
++	/** Device IN Endpoint Transmit FIFO Status Register. <i>Offset:900h +
++	 * (ep_num * 20h) + 18h</i> */
++	volatile uint32_t dtxfsts;
++	/** Device IN Endpoint DMA Buffer Register. <i>Offset:900h +
++	 * (ep_num * 20h) + 1Ch</i> */
++	volatile uint32_t diepdmab;
++} dwc_otg_dev_in_ep_regs_t;
++
++/**
++ * Device Logical OUT Endpoint-Specific Registers. <i>Offsets:
++ * B00h-CFCh</i>
++ *
++ * There will be one set of endpoint registers per logical endpoint
++ * implemented.
++ *
++ * <i>These registers are visible only in Device mode and must not be
++ * accessed in Host mode, as the results are unknown.</i>
++ */
++typedef struct dwc_otg_dev_out_ep_regs {
++	/** Device OUT Endpoint Control Register. <i>Offset:B00h +
++	 * (ep_num * 20h) + 00h</i> */
++	volatile uint32_t doepctl;
++	/** Reserved. <i>Offset:B00h + (ep_num * 20h) + 04h</i> */
++	uint32_t reserved04;
++	/** Device OUT Endpoint Interrupt Register. <i>Offset:B00h +
++	 * (ep_num * 20h) + 08h</i> */
++	volatile uint32_t doepint;
++	/** Reserved. <i>Offset:B00h + (ep_num * 20h) + 0Ch</i> */
++	uint32_t reserved0C;
++	/** Device OUT Endpoint Transfer Size Register. <i>Offset:
++	 * B00h + (ep_num * 20h) + 10h</i> */
++	volatile uint32_t doeptsiz;
++	/** Device OUT Endpoint DMA Address Register. <i>Offset:B00h
++	 * + (ep_num * 20h) + 14h</i> */
++	volatile uint32_t doepdma;
++	/** Reserved. <i>Offset:B00h + 	 * (ep_num * 20h) + 18h</i> */
++	uint32_t unused;
++	/** Device OUT Endpoint DMA Buffer Register. <i>Offset:B00h
++	 * + (ep_num * 20h) + 1Ch</i> */
++	uint32_t doepdmab;
++} dwc_otg_dev_out_ep_regs_t;
++
++/**
++ * This union represents the bit fields in the Device EP Control
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union depctl_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Maximum Packet Size
++		 * IN/OUT EPn
++		 * IN/OUT EP0 - 2 bits
++		 *	 2'b00: 64 Bytes
++		 *	 2'b01: 32
++		 *	 2'b10: 16
++		 *	 2'b11: 8 */
++		unsigned mps:11;
++#define DWC_DEP0CTL_MPS_64	 0
++#define DWC_DEP0CTL_MPS_32	 1
++#define DWC_DEP0CTL_MPS_16	 2
++#define DWC_DEP0CTL_MPS_8	 3
++
++		/** Next Endpoint
++		 * IN EPn/IN EP0
++		 * OUT EPn/OUT EP0 - reserved */
++		unsigned nextep:4;
++
++		/** USB Active Endpoint */
++		unsigned usbactep:1;
++
++		/** Endpoint DPID (INTR/Bulk IN and OUT endpoints)
++		 * This field contains the PID of the packet going to
++		 * be received or transmitted on this endpoint. The
++		 * application should program the PID of the first
++		 * packet going to be received or transmitted on this
++		 * endpoint , after the endpoint is
++		 * activated. Application use the SetD1PID and
++		 * SetD0PID fields of this register to program either
++		 * D0 or D1 PID.
++		 *
++		 * The encoding for this field is
++		 *	 - 0: D0
++		 *	 - 1: D1
++		 */
++		unsigned dpid:1;
++
++		/** NAK Status */
++		unsigned naksts:1;
++
++		/** Endpoint Type
++		 *	2'b00: Control
++		 *	2'b01: Isochronous
++		 *	2'b10: Bulk
++		 *	2'b11: Interrupt */
++		unsigned eptype:2;
++
++		/** Snoop Mode
++		 * OUT EPn/OUT EP0
++		 * IN EPn/IN EP0 - reserved */
++		unsigned snp:1;
++
++		/** Stall Handshake */
++		unsigned stall:1;
++
++		/** Tx Fifo Number
++		 * IN EPn/IN EP0
++		 * OUT EPn/OUT EP0 - reserved */
++		unsigned txfnum:4;
++
++		/** Clear NAK */
++		unsigned cnak:1;
++		/** Set NAK */
++		unsigned snak:1;
++		/** Set DATA0 PID (INTR/Bulk IN and OUT endpoints)
++		 * Writing to this field sets the Endpoint DPID (DPID)
++		 * field in this register to DATA0. Set Even
++		 * (micro)frame (SetEvenFr) (ISO IN and OUT Endpoints)
++		 * Writing to this field sets the Even/Odd
++		 * (micro)frame (EO_FrNum) field to even (micro)
++		 * frame.
++		 */
++		unsigned setd0pid:1;
++		/** Set DATA1 PID (INTR/Bulk IN and OUT endpoints)
++		 * Writing to this field sets the Endpoint DPID (DPID)
++		 * field in this register to DATA1 Set Odd
++		 * (micro)frame (SetOddFr) (ISO IN and OUT Endpoints)
++		 * Writing to this field sets the Even/Odd
++		 * (micro)frame (EO_FrNum) field to odd (micro) frame.
++		 */
++		unsigned setd1pid:1;
++
++		/** Endpoint Disable */
++		unsigned epdis:1;
++		/** Endpoint Enable */
++		unsigned epena:1;
++	} b;
++} depctl_data_t;
++
++/**
++ * This union represents the bit fields in the Device EP Transfer
++ * Size Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union deptsiz_data {
++		/** raw register data */
++	uint32_t d32;
++		/** register bits */
++	struct {
++		/** Transfer size */
++		unsigned xfersize:19;
++/** Max packet count for EP (pow(2,10)-1) */
++#define MAX_PKT_CNT 1023
++		/** Packet Count */
++		unsigned pktcnt:10;
++		/** Multi Count - Periodic IN endpoints */
++		unsigned mc:2;
++		unsigned reserved:1;
++	} b;
++} deptsiz_data_t;
++
++/**
++ * This union represents the bit fields in the Device EP 0 Transfer
++ * Size Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union deptsiz0_data {
++		/** raw register data */
++	uint32_t d32;
++		/** register bits */
++	struct {
++		/** Transfer size */
++		unsigned xfersize:7;
++				/** Reserved */
++		unsigned reserved7_18:12;
++		/** Packet Count */
++		unsigned pktcnt:2;
++				/** Reserved */
++		unsigned reserved21_28:8;
++				/**Setup Packet Count (DOEPTSIZ0 Only) */
++		unsigned supcnt:2;
++		unsigned reserved31;
++	} b;
++} deptsiz0_data_t;
++
++/////////////////////////////////////////////////
++// DMA Descriptor Specific Structures
++//
++
++/** Buffer status definitions */
++
++#define BS_HOST_READY	0x0
++#define BS_DMA_BUSY		0x1
++#define BS_DMA_DONE		0x2
++#define BS_HOST_BUSY	0x3
++
++/** Receive/Transmit status definitions */
++
++#define RTS_SUCCESS		0x0
++#define RTS_BUFFLUSH	0x1
++#define RTS_RESERVED	0x2
++#define RTS_BUFERR		0x3
++
++/**
++ * This union represents the bit fields in the DMA Descriptor
++ * status quadlet. Read the quadlet into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it, <i>b_iso_out</i> and
++ * <i>b_iso_in</i> elements.
++ */
++typedef union dev_dma_desc_sts {
++		/** raw register data */
++	uint32_t d32;
++		/** quadlet bits */
++	struct {
++		/** Received number of bytes */
++		unsigned bytes:16;
++		/** NAK bit - only for OUT EPs */
++		unsigned nak:1;
++		unsigned reserved17_22:6;
++		/** Multiple Transfer - only for OUT EPs */
++		unsigned mtrf:1;
++		/** Setup Packet received - only for OUT EPs */
++		unsigned sr:1;
++		/** Interrupt On Complete */
++		unsigned ioc:1;
++		/** Short Packet */
++		unsigned sp:1;
++		/** Last */
++		unsigned l:1;
++		/** Receive Status */
++		unsigned sts:2;
++		/** Buffer Status */
++		unsigned bs:2;
++	} b;
++
++//#ifdef DWC_EN_ISOC
++		/** iso out quadlet bits */
++	struct {
++		/** Received number of bytes */
++		unsigned rxbytes:11;
++
++		unsigned reserved11:1;
++		/** Frame Number */
++		unsigned framenum:11;
++		/** Received ISO Data PID */
++		unsigned pid:2;
++		/** Interrupt On Complete */
++		unsigned ioc:1;
++		/** Short Packet */
++		unsigned sp:1;
++		/** Last */
++		unsigned l:1;
++		/** Receive Status */
++		unsigned rxsts:2;
++		/** Buffer Status */
++		unsigned bs:2;
++	} b_iso_out;
++
++		/** iso in quadlet bits */
++	struct {
++		/** Transmited number of bytes */
++		unsigned txbytes:12;
++		/** Frame Number */
++		unsigned framenum:11;
++		/** Transmited ISO Data PID */
++		unsigned pid:2;
++		/** Interrupt On Complete */
++		unsigned ioc:1;
++		/** Short Packet */
++		unsigned sp:1;
++		/** Last */
++		unsigned l:1;
++		/** Transmit Status */
++		unsigned txsts:2;
++		/** Buffer Status */
++		unsigned bs:2;
++	} b_iso_in;
++//#endif                                /* DWC_EN_ISOC */
++} dev_dma_desc_sts_t;
++
++/**
++ * DMA Descriptor structure
++ *
++ * DMA Descriptor structure contains two quadlets:
++ * Status quadlet and Data buffer pointer.
++ */
++typedef struct dwc_otg_dev_dma_desc {
++	/** DMA Descriptor status quadlet */
++	dev_dma_desc_sts_t status;
++	/** DMA Descriptor data buffer pointer */
++	uint32_t buf;
++} dwc_otg_dev_dma_desc_t;
++
++/**
++ * The dwc_otg_dev_if structure contains information needed to manage
++ * the DWC_otg controller acting in device mode. It represents the
++ * programming view of the device-specific aspects of the controller.
++ */
++typedef struct dwc_otg_dev_if {
++	/** Pointer to device Global registers.
++	 * Device Global Registers starting at offset 800h
++	 */
++	dwc_otg_device_global_regs_t *dev_global_regs;
++#define DWC_DEV_GLOBAL_REG_OFFSET 0x800
++
++	/**
++	 * Device Logical IN Endpoint-Specific Registers 900h-AFCh
++	 */
++	dwc_otg_dev_in_ep_regs_t *in_ep_regs[MAX_EPS_CHANNELS];
++#define DWC_DEV_IN_EP_REG_OFFSET 0x900
++#define DWC_EP_REG_OFFSET 0x20
++
++	/** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */
++	dwc_otg_dev_out_ep_regs_t *out_ep_regs[MAX_EPS_CHANNELS];
++#define DWC_DEV_OUT_EP_REG_OFFSET 0xB00
++
++	/* Device configuration information */
++	uint8_t speed;				 /**< Device Speed	0: Unknown, 1: LS, 2:FS, 3: HS */
++	uint8_t num_in_eps;		 /**< Number # of Tx EP range: 0-15 exept ep0 */
++	uint8_t num_out_eps;		 /**< Number # of Rx EP range: 0-15 exept ep 0*/
++
++	/** Size of periodic FIFOs (Bytes) */
++	uint16_t perio_tx_fifo_size[MAX_PERIO_FIFOS];
++
++	/** Size of Tx FIFOs (Bytes) */
++	uint16_t tx_fifo_size[MAX_TX_FIFOS];
++
++	/** Thresholding enable flags and length varaiables **/
++	uint16_t rx_thr_en;
++	uint16_t iso_tx_thr_en;
++	uint16_t non_iso_tx_thr_en;
++
++	uint16_t rx_thr_length;
++	uint16_t tx_thr_length;
++
++	/**
++	 * Pointers to the DMA Descriptors for EP0 Control
++	 * transfers (virtual and physical)
++	 */
++
++	/** 2 descriptors for SETUP packets */
++	dwc_dma_t dma_setup_desc_addr[2];
++	dwc_otg_dev_dma_desc_t *setup_desc_addr[2];
++
++	/** Pointer to Descriptor with latest SETUP packet */
++	dwc_otg_dev_dma_desc_t *psetup;
++
++	/** Index of current SETUP handler descriptor */
++	uint32_t setup_desc_index;
++
++	/** Descriptor for Data In or Status In phases */
++	dwc_dma_t dma_in_desc_addr;
++	dwc_otg_dev_dma_desc_t *in_desc_addr;
++
++	/** Descriptor for Data Out or Status Out phases */
++	dwc_dma_t dma_out_desc_addr;
++	dwc_otg_dev_dma_desc_t *out_desc_addr;
++
++	/** Setup Packet Detected - if set clear NAK when queueing */
++	uint32_t spd;
++	/** Isoc ep pointer on which incomplete happens */
++	void *isoc_ep;
++
++} dwc_otg_dev_if_t;
++
++/////////////////////////////////////////////////
++// Host Mode Register Structures
++//
++/**
++ * The Host Global Registers structure defines the size and relative
++ * field offsets for the Host Mode Global Registers.  Host Global
++ * Registers offsets 400h-7FFh.
++*/
++typedef struct dwc_otg_host_global_regs {
++	/** Host Configuration Register.   <i>Offset: 400h</i> */
++	volatile uint32_t hcfg;
++	/** Host Frame Interval Register.	<i>Offset: 404h</i> */
++	volatile uint32_t hfir;
++	/** Host Frame Number / Frame Remaining Register. <i>Offset: 408h</i> */
++	volatile uint32_t hfnum;
++	/** Reserved.	<i>Offset: 40Ch</i> */
++	uint32_t reserved40C;
++	/** Host Periodic Transmit FIFO/ Queue Status Register. <i>Offset: 410h</i> */
++	volatile uint32_t hptxsts;
++	/** Host All Channels Interrupt Register. <i>Offset: 414h</i> */
++	volatile uint32_t haint;
++	/** Host All Channels Interrupt Mask Register. <i>Offset: 418h</i> */
++	volatile uint32_t haintmsk;
++	/** Host Frame List Base Address Register . <i>Offset: 41Ch</i> */
++	volatile uint32_t hflbaddr;
++} dwc_otg_host_global_regs_t;
++
++/**
++ * This union represents the bit fields in the Host Configuration Register.
++ * Read the register into the <i>d32</i> member then set/clear the bits using
++ * the <i>b</i>it elements. Write the <i>d32</i> member to the hcfg register.
++ */
++typedef union hcfg_data {
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		/** FS/LS Phy Clock Select */
++		unsigned fslspclksel:2;
++#define DWC_HCFG_30_60_MHZ 0
++#define DWC_HCFG_48_MHZ	   1
++#define DWC_HCFG_6_MHZ	   2
++
++		/** FS/LS Only Support */
++		unsigned fslssupp:1;
++		unsigned reserved3_6:4;
++		/** Enable 32-KHz Suspend Mode */
++		unsigned ena32khzs:1;
++		/** Resume Validation Periiod */
++		unsigned resvalid:8;
++		unsigned reserved16_22:7;
++		/** Enable Scatter/gather DMA in Host mode */
++		unsigned descdma:1;
++		/** Frame List Entries */
++		unsigned frlisten:2;
++		/** Enable Periodic Scheduling */
++		unsigned perschedena:1;
++		unsigned reserved27_30:4;
++		unsigned modechtimen:1;
++	} b;
++} hcfg_data_t;
++
++/**
++ * This union represents the bit fields in the Host Frame Remaing/Number
++ * Register.
++ */
++typedef union hfir_data {
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		unsigned frint:16;
++		unsigned hfirrldctrl:1;
++		unsigned reserved:15;
++	} b;
++} hfir_data_t;
++
++/**
++ * This union represents the bit fields in the Host Frame Remaing/Number
++ * Register.
++ */
++typedef union hfnum_data {
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		unsigned frnum:16;
++#define DWC_HFNUM_MAX_FRNUM 0x3FFF
++		unsigned frrem:16;
++	} b;
++} hfnum_data_t;
++
++typedef union hptxsts_data {
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		unsigned ptxfspcavail:16;
++		unsigned ptxqspcavail:8;
++		/** Top of the Periodic Transmit Request Queue
++		 *	- bit 24 - Terminate (last entry for the selected channel)
++		 *	- bits 26:25 - Token Type
++		 *	  - 2'b00 - Zero length
++		 *	  - 2'b01 - Ping
++		 *	  - 2'b10 - Disable
++		 *	- bits 30:27 - Channel Number
++		 *	- bit 31 - Odd/even microframe
++		 */
++		unsigned ptxqtop_terminate:1;
++		unsigned ptxqtop_token:2;
++		unsigned ptxqtop_chnum:4;
++		unsigned ptxqtop_odd:1;
++	} b;
++} hptxsts_data_t;
++
++/**
++ * This union represents the bit fields in the Host Port Control and Status
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hprt0 register.
++ */
++typedef union hprt0_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned prtconnsts:1;
++		unsigned prtconndet:1;
++		unsigned prtena:1;
++		unsigned prtenchng:1;
++		unsigned prtovrcurract:1;
++		unsigned prtovrcurrchng:1;
++		unsigned prtres:1;
++		unsigned prtsusp:1;
++		unsigned prtrst:1;
++		unsigned reserved9:1;
++		unsigned prtlnsts:2;
++		unsigned prtpwr:1;
++		unsigned prttstctl:4;
++		unsigned prtspd:2;
++#define DWC_HPRT0_PRTSPD_HIGH_SPEED 0
++#define DWC_HPRT0_PRTSPD_FULL_SPEED 1
++#define DWC_HPRT0_PRTSPD_LOW_SPEED	2
++		unsigned reserved19_31:13;
++	} b;
++} hprt0_data_t;
++
++/**
++ * This union represents the bit fields in the Host All Interrupt
++ * Register.
++ */
++typedef union haint_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned ch0:1;
++		unsigned ch1:1;
++		unsigned ch2:1;
++		unsigned ch3:1;
++		unsigned ch4:1;
++		unsigned ch5:1;
++		unsigned ch6:1;
++		unsigned ch7:1;
++		unsigned ch8:1;
++		unsigned ch9:1;
++		unsigned ch10:1;
++		unsigned ch11:1;
++		unsigned ch12:1;
++		unsigned ch13:1;
++		unsigned ch14:1;
++		unsigned ch15:1;
++		unsigned reserved:16;
++	} b;
++
++	struct {
++		unsigned chint:16;
++		unsigned reserved:16;
++	} b2;
++} haint_data_t;
++
++/**
++ * This union represents the bit fields in the Host All Interrupt
++ * Register.
++ */
++typedef union haintmsk_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned ch0:1;
++		unsigned ch1:1;
++		unsigned ch2:1;
++		unsigned ch3:1;
++		unsigned ch4:1;
++		unsigned ch5:1;
++		unsigned ch6:1;
++		unsigned ch7:1;
++		unsigned ch8:1;
++		unsigned ch9:1;
++		unsigned ch10:1;
++		unsigned ch11:1;
++		unsigned ch12:1;
++		unsigned ch13:1;
++		unsigned ch14:1;
++		unsigned ch15:1;
++		unsigned reserved:16;
++	} b;
++
++	struct {
++		unsigned chint:16;
++		unsigned reserved:16;
++	} b2;
++} haintmsk_data_t;
++
++/**
++ * Host Channel Specific Registers. <i>500h-5FCh</i>
++ */
++typedef struct dwc_otg_hc_regs {
++	/** Host Channel 0 Characteristic Register. <i>Offset: 500h + (chan_num * 20h) + 00h</i> */
++	volatile uint32_t hcchar;
++	/** Host Channel 0 Split Control Register. <i>Offset: 500h + (chan_num * 20h) + 04h</i> */
++	volatile uint32_t hcsplt;
++	/** Host Channel 0 Interrupt Register. <i>Offset: 500h + (chan_num * 20h) + 08h</i> */
++	volatile uint32_t hcint;
++	/** Host Channel 0 Interrupt Mask Register. <i>Offset: 500h + (chan_num * 20h) + 0Ch</i> */
++	volatile uint32_t hcintmsk;
++	/** Host Channel 0 Transfer Size Register. <i>Offset: 500h + (chan_num * 20h) + 10h</i> */
++	volatile uint32_t hctsiz;
++	/** Host Channel 0 DMA Address Register. <i>Offset: 500h + (chan_num * 20h) + 14h</i> */
++	volatile uint32_t hcdma;
++	volatile uint32_t reserved;
++	/** Host Channel 0 DMA Buffer Address Register. <i>Offset: 500h + (chan_num * 20h) + 1Ch</i> */
++	volatile uint32_t hcdmab;
++} dwc_otg_hc_regs_t;
++
++/**
++ * This union represents the bit fields in the Host Channel Characteristics
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hcchar register.
++ */
++typedef union hcchar_data {
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		/** Maximum packet size in bytes */
++		unsigned mps:11;
++
++		/** Endpoint number */
++		unsigned epnum:4;
++
++		/** 0: OUT, 1: IN */
++		unsigned epdir:1;
++
++		unsigned reserved:1;
++
++		/** 0: Full/high speed device, 1: Low speed device */
++		unsigned lspddev:1;
++
++		/** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */
++		unsigned eptype:2;
++
++		/** Packets per frame for periodic transfers. 0 is reserved. */
++		unsigned multicnt:2;
++
++		/** Device address */
++		unsigned devaddr:7;
++
++		/**
++		 * Frame to transmit periodic transaction.
++		 * 0: even, 1: odd
++		 */
++		unsigned oddfrm:1;
++
++		/** Channel disable */
++		unsigned chdis:1;
++
++		/** Channel enable */
++		unsigned chen:1;
++	} b;
++} hcchar_data_t;
++
++typedef union hcsplt_data {
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		/** Port Address */
++		unsigned prtaddr:7;
++
++		/** Hub Address */
++		unsigned hubaddr:7;
++
++		/** Transaction Position */
++		unsigned xactpos:2;
++#define DWC_HCSPLIT_XACTPOS_MID 0
++#define DWC_HCSPLIT_XACTPOS_END 1
++#define DWC_HCSPLIT_XACTPOS_BEGIN 2
++#define DWC_HCSPLIT_XACTPOS_ALL 3
++
++		/** Do Complete Split */
++		unsigned compsplt:1;
++
++		/** Reserved */
++		unsigned reserved:14;
++
++		/** Split Enble */
++		unsigned spltena:1;
++	} b;
++} hcsplt_data_t;
++
++/**
++ * This union represents the bit fields in the Host All Interrupt
++ * Register.
++ */
++typedef union hcint_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Transfer Complete */
++		unsigned xfercomp:1;
++		/** Channel Halted */
++		unsigned chhltd:1;
++		/** AHB Error */
++		unsigned ahberr:1;
++		/** STALL Response Received */
++		unsigned stall:1;
++		/** NAK Response Received */
++		unsigned nak:1;
++		/** ACK Response Received */
++		unsigned ack:1;
++		/** NYET Response Received */
++		unsigned nyet:1;
++		/** Transaction Err */
++		unsigned xacterr:1;
++		/** Babble Error */
++		unsigned bblerr:1;
++		/** Frame Overrun */
++		unsigned frmovrun:1;
++		/** Data Toggle Error */
++		unsigned datatglerr:1;
++		/** Buffer Not Available (only for DDMA mode) */
++		unsigned bna:1;
++		/** Exessive transaction error (only for DDMA mode) */
++		unsigned xcs_xact:1;
++		/** Frame List Rollover interrupt */
++		unsigned frm_list_roll:1;
++		/** Reserved */
++		unsigned reserved14_31:18;
++	} b;
++} hcint_data_t;
++
++/**
++ * This union represents the bit fields in the Host Channel Interrupt Mask
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hcintmsk register.
++ */
++typedef union hcintmsk_data {
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		unsigned xfercompl:1;
++		unsigned chhltd:1;
++		unsigned ahberr:1;
++		unsigned stall:1;
++		unsigned nak:1;
++		unsigned ack:1;
++		unsigned nyet:1;
++		unsigned xacterr:1;
++		unsigned bblerr:1;
++		unsigned frmovrun:1;
++		unsigned datatglerr:1;
++		unsigned bna:1;
++		unsigned xcs_xact:1;
++		unsigned frm_list_roll:1;
++		unsigned reserved14_31:18;
++	} b;
++} hcintmsk_data_t;
++
++/**
++ * This union represents the bit fields in the Host Channel Transfer Size
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hcchar register.
++ */
++
++typedef union hctsiz_data {
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		/** Total transfer size in bytes */
++		unsigned xfersize:19;
++
++		/** Data packets to transfer */
++		unsigned pktcnt:10;
++
++		/**
++		 * Packet ID for next data packet
++		 * 0: DATA0
++		 * 1: DATA2
++		 * 2: DATA1
++		 * 3: MDATA (non-Control), SETUP (Control)
++		 */
++		unsigned pid:2;
++#define DWC_HCTSIZ_DATA0 0
++#define DWC_HCTSIZ_DATA1 2
++#define DWC_HCTSIZ_DATA2 1
++#define DWC_HCTSIZ_MDATA 3
++#define DWC_HCTSIZ_SETUP 3
++
++		/** Do PING protocol when 1 */
++		unsigned dopng:1;
++	} b;
++
++	/** register bits */
++	struct {
++		/** Scheduling information */
++		unsigned schinfo:8;
++
++		/** Number of transfer descriptors.
++		 * Max value:
++		 * 64 in general,
++		 * 256 only for HS isochronous endpoint.
++		 */
++		unsigned ntd:8;
++
++		/** Data packets to transfer */
++		unsigned reserved16_28:13;
++
++		/**
++		 * Packet ID for next data packet
++		 * 0: DATA0
++		 * 1: DATA2
++		 * 2: DATA1
++		 * 3: MDATA (non-Control)
++		 */
++		unsigned pid:2;
++
++		/** Do PING protocol when 1 */
++		unsigned dopng:1;
++	} b_ddma;
++} hctsiz_data_t;
++
++/**
++ * This union represents the bit fields in the Host DMA Address
++ * Register used in Descriptor DMA mode.
++ */
++typedef union hcdma_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned reserved0_2:3;
++		/** Current Transfer Descriptor. Not used for ISOC */
++		unsigned ctd:8;
++		/** Start Address of Descriptor List */
++		unsigned dma_addr:21;
++	} b;
++} hcdma_data_t;
++
++/**
++ * This union represents the bit fields in the DMA Descriptor
++ * status quadlet for host mode. Read the quadlet into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union host_dma_desc_sts {
++	/** raw register data */
++	uint32_t d32;
++	/** quadlet bits */
++
++	/* for non-isochronous  */
++	struct {
++		/** Number of bytes */
++		unsigned n_bytes:17;
++		/** QTD offset to jump when Short Packet received - only for IN EPs */
++		unsigned qtd_offset:6;
++		/**
++		 * Set to request the core to jump to alternate QTD if
++		 * Short Packet received - only for IN EPs
++		 */
++		unsigned a_qtd:1;
++		 /**
++		  * Setup Packet bit. When set indicates that buffer contains
++		  * setup packet.
++		  */
++		unsigned sup:1;
++		/** Interrupt On Complete */
++		unsigned ioc:1;
++		/** End of List */
++		unsigned eol:1;
++		unsigned reserved27:1;
++		/** Rx/Tx Status */
++		unsigned sts:2;
++#define DMA_DESC_STS_PKTERR	1
++		unsigned reserved30:1;
++		/** Active Bit */
++		unsigned a:1;
++	} b;
++	/* for isochronous */
++	struct {
++		/** Number of bytes */
++		unsigned n_bytes:12;
++		unsigned reserved12_24:13;
++		/** Interrupt On Complete */
++		unsigned ioc:1;
++		unsigned reserved26_27:2;
++		/** Rx/Tx Status */
++		unsigned sts:2;
++		unsigned reserved30:1;
++		/** Active Bit */
++		unsigned a:1;
++	} b_isoc;
++} host_dma_desc_sts_t;
++
++#define	MAX_DMA_DESC_SIZE		131071
++#define MAX_DMA_DESC_NUM_GENERIC	64
++#define MAX_DMA_DESC_NUM_HS_ISOC	256
++#define MAX_FRLIST_EN_NUM		64
++/**
++ * Host-mode DMA Descriptor structure
++ *
++ * DMA Descriptor structure contains two quadlets:
++ * Status quadlet and Data buffer pointer.
++ */
++typedef struct dwc_otg_host_dma_desc {
++	/** DMA Descriptor status quadlet */
++	host_dma_desc_sts_t status;
++	/** DMA Descriptor data buffer pointer */
++	uint32_t buf;
++} dwc_otg_host_dma_desc_t;
++
++/** OTG Host Interface Structure.
++ *
++ * The OTG Host Interface Structure structure contains information
++ * needed to manage the DWC_otg controller acting in host mode. It
++ * represents the programming view of the host-specific aspects of the
++ * controller.
++ */
++typedef struct dwc_otg_host_if {
++	/** Host Global Registers starting at offset 400h.*/
++	dwc_otg_host_global_regs_t *host_global_regs;
++#define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400
++
++	/** Host Port 0 Control and Status Register */
++	volatile uint32_t *hprt0;
++#define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440
++
++	/** Host Channel Specific Registers at offsets 500h-5FCh. */
++	dwc_otg_hc_regs_t *hc_regs[MAX_EPS_CHANNELS];
++#define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500
++#define DWC_OTG_CHAN_REGS_OFFSET 0x20
++
++	/* Host configuration information */
++	/** Number of Host Channels (range: 1-16) */
++	uint8_t num_host_channels;
++	/** Periodic EPs supported (0: no, 1: yes) */
++	uint8_t perio_eps_supported;
++	/** Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */
++	uint16_t perio_tx_fifo_size;
++
++} dwc_otg_host_if_t;
++
++/**
++ * This union represents the bit fields in the Power and Clock Gating Control
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union pcgcctl_data {
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		/** Stop Pclk */
++		unsigned stoppclk:1;
++		/** Gate Hclk */
++		unsigned gatehclk:1;
++		/** Power Clamp */
++		unsigned pwrclmp:1;
++		/** Reset Power Down Modules */
++		unsigned rstpdwnmodule:1;
++		/** Reserved */
++		unsigned reserved:1;
++		/** Enable Sleep Clock Gating (Enbl_L1Gating) */
++		unsigned enbl_sleep_gating:1;
++		/** PHY In Sleep (PhySleep) */
++		unsigned phy_in_sleep:1;
++		/** Deep Sleep*/
++		unsigned deep_sleep:1;
++		unsigned resetaftsusp:1;
++		unsigned restoremode:1;
++		unsigned enbl_extnd_hiber:1;
++		unsigned extnd_hiber_pwrclmp:1;
++		unsigned extnd_hiber_switch:1;
++		unsigned ess_reg_restored:1;
++		unsigned prt_clk_sel:2;
++		unsigned port_power:1;
++		unsigned max_xcvrselect:2;
++		unsigned max_termsel:1;
++		unsigned mac_dev_addr:7;
++		unsigned p2hd_dev_enum_spd:2;
++		unsigned p2hd_prt_spd:2;
++		unsigned if_dev_mode:1;
++	} b;
++} pcgcctl_data_t;
++
++/**
++ * This union represents the bit fields in the Global Data FIFO Software
++ * Configuration Register. Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union gdfifocfg_data {
++	/* raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** OTG Data FIFO depth */
++		unsigned gdfifocfg:16;
++		/** Start address of EP info controller */
++		unsigned epinfobase:16;
++	} b;
++} gdfifocfg_data_t;
++
++/**
++ * This union represents the bit fields in the Global Power Down Register
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union gpwrdn_data {
++	/* raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		/** PMU Interrupt Select */
++		unsigned pmuintsel:1;
++		/** PMU Active */
++		unsigned pmuactv:1;
++		/** Restore */
++		unsigned restore:1;
++		/** Power Down Clamp */
++		unsigned pwrdnclmp:1;
++		/** Power Down Reset */
++		unsigned pwrdnrstn:1;
++		/** Power Down Switch */
++		unsigned pwrdnswtch:1;
++		/** Disable VBUS */
++		unsigned dis_vbus:1;
++		/** Line State Change */
++		unsigned lnstschng:1;
++		/** Line state change mask */
++		unsigned lnstchng_msk:1;
++		/** Reset Detected */
++		unsigned rst_det:1;
++		/** Reset Detect mask */
++		unsigned rst_det_msk:1;
++		/** Disconnect Detected */
++		unsigned disconn_det:1;
++		/** Disconnect Detect mask */
++		unsigned disconn_det_msk:1;
++		/** Connect Detected*/
++		unsigned connect_det:1;
++		/** Connect Detected Mask*/
++		unsigned connect_det_msk:1;
++		/** SRP Detected */
++		unsigned srp_det:1;
++		/** SRP Detect mask */
++		unsigned srp_det_msk:1;
++		/** Status Change Interrupt */
++		unsigned sts_chngint:1;
++		/** Status Change Interrupt Mask */
++		unsigned sts_chngint_msk:1;
++		/** Line State */
++		unsigned linestate:2;
++		/** Indicates current mode(status of IDDIG signal) */
++		unsigned idsts:1;
++		/** B Session Valid signal status*/
++		unsigned bsessvld:1;
++		/** ADP Event Detected */
++		unsigned adp_int:1;
++		/** Multi Valued ID pin */
++		unsigned mult_val_id_bc:5;
++		/** Reserved 24_31 */
++		unsigned reserved29_31:3;
++	} b;
++} gpwrdn_data_t;
++
++#endif
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/Makefile linux-raspberry-pi/drivers/usb/host/dwc_otg/Makefile
+--- linux-3.12.6/drivers/usb/host/dwc_otg/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/Makefile	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,81 @@
++#
++# Makefile for DWC_otg Highspeed USB controller driver
++#
++
++ifneq ($(KERNELRELEASE),)
++
++# Use the BUS_INTERFACE variable to compile the software for either
++# PCI(PCI_INTERFACE) or LM(LM_INTERFACE) bus.
++ifeq ($(BUS_INTERFACE),)
++#	BUS_INTERFACE = -DPCI_INTERFACE
++#	BUS_INTERFACE = -DLM_INTERFACE
++        BUS_INTERFACE = -DPLATFORM_INTERFACE
++endif
++
++#EXTRA_CFLAGS	+= -DDEBUG
++#EXTRA_CFLAGS	+= -DDWC_OTG_DEBUGLEV=1 # reduce common debug msgs
++
++# Use one of the following flags to compile the software in host-only or
++# device-only mode.
++#EXTRA_CFLAGS        += -DDWC_HOST_ONLY
++#EXTRA_CFLAGS        += -DDWC_DEVICE_ONLY
++
++EXTRA_CFLAGS	+= -Dlinux -DDWC_HS_ELECT_TST
++#EXTRA_CFLAGS	+= -DDWC_EN_ISOC
++EXTRA_CFLAGS   	+= -I$(obj)/../dwc_common_port
++#EXTRA_CFLAGS   	+= -I$(PORTLIB)
++EXTRA_CFLAGS   	+= -DDWC_LINUX
++EXTRA_CFLAGS   	+= $(CFI)
++EXTRA_CFLAGS	+= $(BUS_INTERFACE)
++#EXTRA_CFLAGS	+= -DDWC_DEV_SRPCAP
++
++obj-$(CONFIG_USB_DWCOTG) += dwc_otg.o
++
++dwc_otg-objs	:= dwc_otg_driver.o dwc_otg_attr.o
++dwc_otg-objs	+= dwc_otg_cil.o dwc_otg_cil_intr.o
++dwc_otg-objs	+= dwc_otg_pcd_linux.o dwc_otg_pcd.o dwc_otg_pcd_intr.o
++dwc_otg-objs	+= dwc_otg_hcd.o dwc_otg_hcd_linux.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o dwc_otg_hcd_ddma.o
++dwc_otg-objs	+= dwc_otg_adp.o
++dwc_otg-objs	+= dwc_otg_mphi_fix.o
++ifneq ($(CFI),)
++dwc_otg-objs	+= dwc_otg_cfi.o
++endif
++
++kernrelwd := $(subst ., ,$(KERNELRELEASE))
++kernrel3 := $(word 1,$(kernrelwd)).$(word 2,$(kernrelwd)).$(word 3,$(kernrelwd))
++
++ifneq ($(kernrel3),2.6.20)
++EXTRA_CFLAGS += $(CPPFLAGS)
++endif
++
++else
++
++PWD		:= $(shell pwd)
++PORTLIB		:= $(PWD)/../dwc_common_port
++
++# Command paths
++CTAGS		:= $(CTAGS)
++DOXYGEN		:= $(DOXYGEN)
++
++default: portlib
++	$(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules
++
++install: default
++	$(MAKE) -C$(KDIR) M=$(PORTLIB) modules_install
++	$(MAKE) -C$(KDIR) M=$(PWD) modules_install
++
++portlib:
++	$(MAKE) -C$(KDIR) M=$(PORTLIB) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules
++	cp $(PORTLIB)/Module.symvers $(PWD)/
++
++docs:	$(wildcard *.[hc]) doc/doxygen.cfg
++	$(DOXYGEN) doc/doxygen.cfg
++
++tags:	$(wildcard *.[hc])
++	$(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h)
++
++
++clean:
++	rm -rf   *.o *.ko .*cmd *.mod.c .tmp_versions Module.symvers
++
++endif
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm linux-raspberry-pi/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm
+--- linux-3.12.6/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,337 @@
++package dwc_otg_test;
++
++use strict;
++use Exporter ();
++
++use vars qw(@ISA @EXPORT
++$sysfsdir $paramdir $errors $params
++);
++
++@ISA = qw(Exporter);
++
++#
++# Globals
++#
++$sysfsdir = "/sys/devices/lm0";
++$paramdir = "/sys/module/dwc_otg";
++$errors = 0;
++
++$params = [
++	   {
++	    NAME => "otg_cap",
++	    DEFAULT => 0,
++	    ENUM => [],
++	    LOW => 0,
++	    HIGH => 2
++	   },
++	   {
++	    NAME => "dma_enable",
++	    DEFAULT => 0,
++	    ENUM => [],
++	    LOW => 0,
++	    HIGH => 1
++	   },
++	   {
++	    NAME => "dma_burst_size",
++	    DEFAULT => 32,
++	    ENUM => [1, 4, 8, 16, 32, 64, 128, 256],
++	    LOW => 1,
++	    HIGH => 256
++	   },
++	   {
++	    NAME => "host_speed",
++	    DEFAULT => 0,
++	    ENUM => [],
++	    LOW => 0,
++	    HIGH => 1
++	   },
++	   {
++	    NAME => "host_support_fs_ls_low_power",
++	    DEFAULT => 0,
++	    ENUM => [],
++	    LOW => 0,
++	    HIGH => 1
++	   },
++	   {
++	    NAME => "host_ls_low_power_phy_clk",
++	    DEFAULT => 0,
++	    ENUM => [],
++	    LOW => 0,
++	    HIGH => 1
++	   },
++	   {
++	    NAME => "dev_speed",
++	    DEFAULT => 0,
++	    ENUM => [],
++	    LOW => 0,
++	    HIGH => 1
++	   },
++	   {
++	    NAME => "enable_dynamic_fifo",
++	    DEFAULT => 1,
++	    ENUM => [],
++	    LOW => 0,
++	    HIGH => 1
++	   },
++	   {
++	    NAME => "data_fifo_size",
++	    DEFAULT => 8192,
++	    ENUM => [],
++	    LOW => 32,
++	    HIGH => 32768
++	   },
++	   {
++	    NAME => "dev_rx_fifo_size",
++	    DEFAULT => 1064,
++	    ENUM => [],
++	    LOW => 16,
++	    HIGH => 32768
++	   },
++	   {
++	    NAME => "dev_nperio_tx_fifo_size",
++	    DEFAULT => 1024,
++	    ENUM => [],
++	    LOW => 16,
++	    HIGH => 32768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_1",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_2",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_3",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_4",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_5",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_6",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_7",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_8",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_9",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_10",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_11",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_12",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_13",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_14",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_15",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "host_rx_fifo_size",
++	    DEFAULT => 1024,
++	    ENUM => [],
++	    LOW => 16,
++	    HIGH => 32768
++	   },
++	   {
++	    NAME => "host_nperio_tx_fifo_size",
++	    DEFAULT => 1024,
++	    ENUM => [],
++	    LOW => 16,
++	    HIGH => 32768
++	   },
++	   {
++	    NAME => "host_perio_tx_fifo_size",
++	    DEFAULT => 1024,
++	    ENUM => [],
++	    LOW => 16,
++	    HIGH => 32768
++	   },
++	   {
++	    NAME => "max_transfer_size",
++	    DEFAULT => 65535,
++	    ENUM => [],
++	    LOW => 2047,
++	    HIGH => 65535
++	   },
++	   {
++	    NAME => "max_packet_count",
++	    DEFAULT => 511,
++	    ENUM => [],
++	    LOW => 15,
++	    HIGH => 511
++	   },
++	   {
++	    NAME => "host_channels",
++	    DEFAULT => 12,
++	    ENUM => [],
++	    LOW => 1,
++	    HIGH => 16
++	   },
++	   {
++	    NAME => "dev_endpoints",
++	    DEFAULT => 6,
++	    ENUM => [],
++	    LOW => 1,
++	    HIGH => 15
++	   },
++	   {
++	    NAME => "phy_type",
++	    DEFAULT => 1,
++	    ENUM => [],
++	    LOW => 0,
++	    HIGH => 2
++	   },
++	   {
++	    NAME => "phy_utmi_width",
++	    DEFAULT => 16,
++	    ENUM => [8, 16],
++	    LOW => 8,
++	    HIGH => 16
++	   },
++	   {
++	    NAME => "phy_ulpi_ddr",
++	    DEFAULT => 0,
++	    ENUM => [],
++	    LOW => 0,
++	    HIGH => 1
++	   },
++	  ];
++
++
++#
++#
++sub check_arch {
++  $_ = `uname -m`;
++  chomp;
++  unless (m/armv4tl/) {
++    warn "# \n# Can't execute on $_.  Run on integrator platform.\n# \n";
++    return 0;
++  }
++  return 1;
++}
++
++#
++#
++sub load_module {
++  my $params = shift;
++  print "\nRemoving Module\n";
++  system "rmmod dwc_otg";
++  print "Loading Module\n";
++  if ($params ne "") {
++    print "Module Parameters: $params\n";
++  }
++  if (system("modprobe dwc_otg $params")) {
++    warn "Unable to load module\n";
++    return 0;
++  }
++  return 1;
++}
++
++#
++#
++sub test_status {
++  my $arg = shift;
++
++  print "\n";
++
++  if (defined $arg) {
++    warn "WARNING: $arg\n";
++  }
++
++  if ($errors > 0) {
++    warn "TEST FAILED with $errors errors\n";
++    return 0;
++  } else {
++    print "TEST PASSED\n";
++    return 0 if (defined $arg);
++  }
++  return 1;
++}
++
++#
++#
++@EXPORT = qw(
++$sysfsdir
++$paramdir
++$params
++$errors
++check_arch
++load_module
++test_status
++);
++
++1;
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/test/Makefile linux-raspberry-pi/drivers/usb/host/dwc_otg/test/Makefile
+--- linux-3.12.6/drivers/usb/host/dwc_otg/test/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/test/Makefile	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,16 @@
++
++PERL=/usr/bin/perl
++PL_TESTS=test_sysfs.pl test_mod_param.pl
++
++.PHONY : test
++test : perl_tests
++
++perl_tests :
++	@echo
++	@echo Running perl tests
++	@for test in $(PL_TESTS); do \
++	  if $(PERL) ./$$test ; then \
++	    echo "=======> $$test, PASSED" ; \
++	  else echo "=======> $$test, FAILED" ; \
++	  fi \
++	done
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/test/test_mod_param.pl linux-raspberry-pi/drivers/usb/host/dwc_otg/test/test_mod_param.pl
+--- linux-3.12.6/drivers/usb/host/dwc_otg/test/test_mod_param.pl	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/test/test_mod_param.pl	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,133 @@
++#!/usr/bin/perl -w
++#
++# Run this program on the integrator.
++#
++# - Tests module parameter default values.
++# - Tests setting of valid module parameter values via modprobe.
++# - Tests invalid module parameter values.
++# -----------------------------------------------------------------------------
++use strict;
++use dwc_otg_test;
++
++check_arch() or die;
++
++#
++#
++sub test {
++  my ($param,$expected) = @_;
++  my $value = get($param);
++
++  if ($value == $expected) {
++    print "$param = $value, okay\n";
++  }
++
++  else {
++    warn "ERROR: value of $param != $expected, $value\n";
++    $errors ++;
++  }
++}
++
++#
++#
++sub get {
++  my $param = shift;
++  my $tmp = `cat $paramdir/$param`;
++  chomp $tmp;
++  return $tmp;
++}
++
++#
++#
++sub test_main {
++
++  print "\nTesting Module Parameters\n";
++
++  load_module("") or die;
++
++  # Test initial values
++  print "\nTesting Default Values\n";
++  foreach (@{$params}) {
++    test ($_->{NAME}, $_->{DEFAULT});
++  }
++
++  # Test low value
++  print "\nTesting Low Value\n";
++  my $cmd_params = "";
++  foreach (@{$params}) {
++    $cmd_params = $cmd_params . "$_->{NAME}=$_->{LOW} ";
++  }
++  load_module($cmd_params) or die;
++
++  foreach (@{$params}) {
++    test ($_->{NAME}, $_->{LOW});
++  }
++
++  # Test high value
++  print "\nTesting High Value\n";
++  $cmd_params = "";
++  foreach (@{$params}) {
++    $cmd_params = $cmd_params . "$_->{NAME}=$_->{HIGH} ";
++  }
++  load_module($cmd_params) or die;
++
++  foreach (@{$params}) {
++    test ($_->{NAME}, $_->{HIGH});
++  }
++
++  # Test Enum
++  print "\nTesting Enumerated\n";
++  foreach (@{$params}) {
++    if (defined $_->{ENUM}) {
++      my $value;
++      foreach $value (@{$_->{ENUM}}) {
++	$cmd_params = "$_->{NAME}=$value";
++	load_module($cmd_params) or die;
++	test ($_->{NAME}, $value);
++      }
++    }
++  }
++
++  # Test Invalid Values
++  print "\nTesting Invalid Values\n";
++  $cmd_params = "";
++  foreach (@{$params}) {
++    $cmd_params = $cmd_params . sprintf "$_->{NAME}=%d ", $_->{LOW}-1;
++  }
++  load_module($cmd_params) or die;
++
++  foreach (@{$params}) {
++    test ($_->{NAME}, $_->{DEFAULT});
++  }
++
++  $cmd_params = "";
++  foreach (@{$params}) {
++    $cmd_params = $cmd_params . sprintf "$_->{NAME}=%d ", $_->{HIGH}+1;
++  }
++  load_module($cmd_params) or die;
++
++  foreach (@{$params}) {
++    test ($_->{NAME}, $_->{DEFAULT});
++  }
++
++  print "\nTesting Enumerated\n";
++  foreach (@{$params}) {
++    if (defined $_->{ENUM}) {
++      my $value;
++      foreach $value (@{$_->{ENUM}}) {
++	$value = $value + 1;
++	$cmd_params = "$_->{NAME}=$value";
++	load_module($cmd_params) or die;
++	test ($_->{NAME}, $_->{DEFAULT});
++	$value = $value - 2;
++	$cmd_params = "$_->{NAME}=$value";
++	load_module($cmd_params) or die;
++	test ($_->{NAME}, $_->{DEFAULT});
++      }
++    }
++  }
++
++  test_status() or die;
++}
++
++test_main();
++0;
+diff -Nur linux-3.12.6/drivers/usb/host/dwc_otg/test/test_sysfs.pl linux-raspberry-pi/drivers/usb/host/dwc_otg/test/test_sysfs.pl
+--- linux-3.12.6/drivers/usb/host/dwc_otg/test/test_sysfs.pl	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/dwc_otg/test/test_sysfs.pl	2013-12-29 10:41:43.000000000 +0100
+@@ -0,0 +1,193 @@
++#!/usr/bin/perl -w
++#
++# Run this program on the integrator
++# - Tests select sysfs attributes.
++# - Todo ... test more attributes, hnp/srp, buspower/bussuspend, etc.
++# -----------------------------------------------------------------------------
++use strict;
++use dwc_otg_test;
++
++check_arch() or die;
++
++#
++#
++sub test {
++  my ($attr,$expected) = @_;
++  my $string = get($attr);
++
++  if ($string eq $expected) {
++    printf("$attr = $string, okay\n");
++  }
++  else {
++    warn "ERROR: value of $attr != $expected, $string\n";
++    $errors ++;
++  }
++}
++
++#
++#
++sub set {
++  my ($reg, $value) = @_;
++  system "echo $value > $sysfsdir/$reg";
++}
++
++#
++#
++sub get {
++  my $attr = shift;
++  my $string = `cat $sysfsdir/$attr`;
++  chomp $string;
++  if ($string =~ m/\s\=\s/) {
++    my $tmp;
++    ($tmp, $string) = split /\s=\s/, $string;
++  }
++  return $string;
++}
++
++#
++#
++sub test_main {
++  print("\nTesting Sysfs Attributes\n");
++
++  load_module("") or die;
++
++  # Test initial values of regoffset/regvalue/guid/gsnpsid
++  print("\nTesting Default Values\n");
++
++  test("regoffset", "0xffffffff");
++  test("regvalue", "invalid offset");
++  test("guid", "0x12345678");	# this will fail if it has been changed
++  test("gsnpsid", "0x4f54200a");
++
++  # Test operation of regoffset/regvalue
++  print("\nTesting regoffset\n");
++  set('regoffset', '5a5a5a5a');
++  test("regoffset", "0xffffffff");
++
++  set('regoffset', '0');
++  test("regoffset", "0x00000000");
++
++  set('regoffset', '40000');
++  test("regoffset", "0x00000000");
++
++  set('regoffset', '3ffff');
++  test("regoffset", "0x0003ffff");
++
++  set('regoffset', '1');
++  test("regoffset", "0x00000001");
++
++  print("\nTesting regvalue\n");
++  set('regoffset', '3c');
++  test("regvalue", "0x12345678");
++  set('regvalue', '5a5a5a5a');
++  test("regvalue", "0x5a5a5a5a");
++  set('regvalue','a5a5a5a5');
++  test("regvalue", "0xa5a5a5a5");
++  set('guid','12345678');
++
++  # Test HNP Capable
++  print("\nTesting HNP Capable bit\n");
++  set('hnpcapable', '1');
++  test("hnpcapable", "0x1");
++  set('hnpcapable','0');
++  test("hnpcapable", "0x0");
++
++  set('regoffset','0c');
++
++  my $old = get('gusbcfg');
++  print("setting hnpcapable\n");
++  set('hnpcapable', '1');
++  test("hnpcapable", "0x1");
++  test('gusbcfg', sprintf "0x%08x", (oct ($old) | (1<<9)));
++  test('regvalue', sprintf "0x%08x", (oct ($old) | (1<<9)));
++
++  $old = get('gusbcfg');
++  print("clearing hnpcapable\n");
++  set('hnpcapable', '0');
++  test("hnpcapable", "0x0");
++  test ('gusbcfg', sprintf "0x%08x", oct ($old) & (~(1<<9)));
++  test ('regvalue', sprintf "0x%08x", oct ($old) & (~(1<<9)));
++
++  # Test SRP Capable
++  print("\nTesting SRP Capable bit\n");
++  set('srpcapable', '1');
++  test("srpcapable", "0x1");
++  set('srpcapable','0');
++  test("srpcapable", "0x0");
++
++  set('regoffset','0c');
++
++  $old = get('gusbcfg');
++  print("setting srpcapable\n");
++  set('srpcapable', '1');
++  test("srpcapable", "0x1");
++  test('gusbcfg', sprintf "0x%08x", (oct ($old) | (1<<8)));
++  test('regvalue', sprintf "0x%08x", (oct ($old) | (1<<8)));
++
++  $old = get('gusbcfg');
++  print("clearing srpcapable\n");
++  set('srpcapable', '0');
++  test("srpcapable", "0x0");
++  test('gusbcfg', sprintf "0x%08x", oct ($old) & (~(1<<8)));
++  test('regvalue', sprintf "0x%08x", oct ($old) & (~(1<<8)));
++
++  # Test GGPIO
++  print("\nTesting GGPIO\n");
++  set('ggpio','5a5a5a5a');
++  test('ggpio','0x5a5a0000');
++  set('ggpio','a5a5a5a5');
++  test('ggpio','0xa5a50000');
++  set('ggpio','11110000');
++  test('ggpio','0x11110000');
++  set('ggpio','00001111');
++  test('ggpio','0x00000000');
++
++  # Test DEVSPEED
++  print("\nTesting DEVSPEED\n");
++  set('regoffset','800');
++  $old = get('regvalue');
++  set('devspeed','0');
++  test('devspeed','0x0');
++  test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3)));
++  set('devspeed','1');
++  test('devspeed','0x1');
++  test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 1));
++  set('devspeed','2');
++  test('devspeed','0x2');
++  test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 2));
++  set('devspeed','3');
++  test('devspeed','0x3');
++  test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 3));
++  set('devspeed','4');
++  test('devspeed','0x0');
++  test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3)));
++  set('devspeed','5');
++  test('devspeed','0x1');
++  test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 1));
++
++
++  #  mode	Returns the current mode:0 for device mode1 for host mode	Read
++  #  hnp	Initiate the Host Negotiation Protocol.  Read returns the status.	Read/Write
++  #  srp	Initiate the Session Request Protocol.  Read returns the status.	Read/Write
++  #  buspower	Get or Set the Power State of the bus (0 - Off or 1 - On) 	Read/Write
++  #  bussuspend	Suspend the USB bus.	Read/Write
++  #  busconnected	Get the connection status of the bus 	Read
++
++  #  gotgctl	Get or set the Core Control Status Register.	Read/Write
++  ##  gusbcfg	Get or set the Core USB Configuration Register	Read/Write
++  #  grxfsiz	Get or set the Receive FIFO Size Register	Read/Write
++  #  gnptxfsiz	Get or set the non-periodic Transmit Size Register	Read/Write
++  #  gpvndctl	Get or set the PHY Vendor Control Register	Read/Write
++  ##  ggpio	Get the value in the lower 16-bits of the General Purpose IO Register or Set the upper 16 bits.	Read/Write
++  ##  guid	Get or set the value of the User ID Register	Read/Write
++  ##  gsnpsid	Get the value of the Synopsys ID Regester	Read
++  ##  devspeed	Get or set the device speed setting in the DCFG register	Read/Write
++  #  enumspeed	Gets the device enumeration Speed.	Read
++  #  hptxfsiz	Get the value of the Host Periodic Transmit FIFO	Read
++  #  hprt0	Get or Set the value in the Host Port Control and Status Register	Read/Write
++
++  test_status("TEST NYI") or die;
++}
++
++test_main();
++0;
+diff -Nur linux-3.12.6/drivers/usb/host/Kconfig linux-raspberry-pi/drivers/usb/host/Kconfig
+--- linux-3.12.6/drivers/usb/host/Kconfig	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/Kconfig	2013-12-29 10:41:43.000000000 +0100
+@@ -650,6 +650,19 @@
+ 	  To compile this driver a module, choose M here: the module
+ 	  will be called "hwa-hc".
+ 
++config USB_DWCOTG
++	tristate "Synopsis DWC host support"
++	depends on USB
++	help
++	  The Synopsis DWC controller is a dual-role
++	  host/peripheral/OTG ("On The Go") USB controllers.
++
++	  Enable this option to support this IP in host controller mode.
++	  If unsure, say N.
++
++	  To compile this driver as a module, choose M here: the
++	  modules built will be called dwc_otg and dwc_common_port.
++
+ config USB_IMX21_HCD
+        tristate "i.MX21 HCD support"
+        depends on ARM && ARCH_MXC
+diff -Nur linux-3.12.6/drivers/usb/host/Makefile linux-raspberry-pi/drivers/usb/host/Makefile
+--- linux-3.12.6/drivers/usb/host/Makefile	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/host/Makefile	2013-12-29 10:41:43.000000000 +0100
+@@ -56,6 +56,8 @@
+ obj-$(CONFIG_USB_R8A66597_HCD)	+= r8a66597-hcd.o
+ obj-$(CONFIG_USB_ISP1760_HCD)	+= isp1760.o
+ obj-$(CONFIG_USB_HWA_HCD)	+= hwa-hc.o
++
++obj-$(CONFIG_USB_DWCOTG)        += dwc_otg/ dwc_common_port/
+ obj-$(CONFIG_USB_IMX21_HCD)	+= imx21-hcd.o
+ obj-$(CONFIG_USB_FSL_MPH_DR_OF)	+= fsl-mph-dr-of.o
+ obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
+diff -Nur linux-3.12.6/drivers/usb/Makefile linux-raspberry-pi/drivers/usb/Makefile
+--- linux-3.12.6/drivers/usb/Makefile	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/usb/Makefile	2013-12-29 10:41:40.000000000 +0100
+@@ -23,6 +23,7 @@
+ obj-$(CONFIG_USB_R8A66597_HCD)	+= host/
+ obj-$(CONFIG_USB_HWA_HCD)	+= host/
+ obj-$(CONFIG_USB_ISP1760_HCD)	+= host/
++obj-$(CONFIG_USB_DWCOTG)	+= host/
+ obj-$(CONFIG_USB_IMX21_HCD)	+= host/
+ obj-$(CONFIG_USB_FSL_MPH_DR_OF)	+= host/
+ obj-$(CONFIG_USB_FUSBH200_HCD)	+= host/
+diff -Nur linux-3.12.6/drivers/video/bcm2708_fb.c linux-raspberry-pi/drivers/video/bcm2708_fb.c
+--- linux-3.12.6/drivers/video/bcm2708_fb.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/video/bcm2708_fb.c	2013-12-29 10:41:47.000000000 +0100
+@@ -0,0 +1,647 @@
++/*
++ *  linux/drivers/video/bcm2708_fb.c
++ *
++ * Copyright (C) 2010 Broadcom
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file COPYING in the main directory of this archive
++ * for more details.
++ *
++ * Broadcom simple framebuffer driver
++ *
++ * This file is derived from cirrusfb.c
++ * Copyright 1999-2001 Jeff Garzik <jgarzik@pobox.com>
++ *
++ */
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/errno.h>
++#include <linux/string.h>
++#include <linux/slab.h>
++#include <linux/mm.h>
++#include <linux/fb.h>
++#include <linux/init.h>
++#include <linux/ioport.h>
++#include <linux/list.h>
++#include <linux/platform_device.h>
++#include <linux/clk.h>
++#include <linux/printk.h>
++#include <linux/console.h>
++
++#include <mach/dma.h>
++#include <mach/platform.h>
++#include <mach/vcio.h>
++
++#include <asm/sizes.h>
++#include <linux/io.h>
++#include <linux/dma-mapping.h>
++
++#ifdef BCM2708_FB_DEBUG
++#define print_debug(fmt,...) pr_debug("%s:%s:%d: "fmt, MODULE_NAME, __func__, __LINE__, ##__VA_ARGS__)
++#else
++#define print_debug(fmt,...)
++#endif
++
++/* This is limited to 16 characters when displayed by X startup */
++static const char *bcm2708_name = "BCM2708 FB";
++
++#define DRIVER_NAME "bcm2708_fb"
++
++/* this data structure describes each frame buffer device we find */
++
++struct fbinfo_s {
++	u32 xres, yres, xres_virtual, yres_virtual;
++	u32 pitch, bpp;
++	u32 xoffset, yoffset;
++	u32 base;
++	u32 screen_size;
++	u16 cmap[256];
++};
++
++struct bcm2708_fb {
++	struct fb_info fb;
++	struct platform_device *dev;
++	struct fbinfo_s *info;
++	dma_addr_t dma;
++	u32 cmap[16];
++	int dma_chan;
++	int dma_irq;
++	void __iomem *dma_chan_base;
++	void *cb_base;		/* DMA control blocks */
++	dma_addr_t cb_handle;
++};
++
++#define to_bcm2708(info)	container_of(info, struct bcm2708_fb, fb)
++
++static int bcm2708_fb_set_bitfields(struct fb_var_screeninfo *var)
++{
++	int ret = 0;
++
++	memset(&var->transp, 0, sizeof(var->transp));
++
++	var->red.msb_right = 0;
++	var->green.msb_right = 0;
++	var->blue.msb_right = 0;
++
++	switch (var->bits_per_pixel) {
++	case 1:
++	case 2:
++	case 4:
++	case 8:
++		var->red.length = var->bits_per_pixel;
++		var->red.offset = 0;
++		var->green.length = var->bits_per_pixel;
++		var->green.offset = 0;
++		var->blue.length = var->bits_per_pixel;
++		var->blue.offset = 0;
++		break;
++	case 16:
++		var->red.length = 5;
++		var->blue.length = 5;
++		/*
++		 * Green length can be 5 or 6 depending whether
++		 * we're operating in RGB555 or RGB565 mode.
++		 */
++		if (var->green.length != 5 && var->green.length != 6)
++			var->green.length = 6;
++		break;
++	case 24:
++		var->red.length = 8;
++		var->blue.length = 8;
++		var->green.length = 8;
++		break;
++	case 32:
++		var->red.length = 8;
++		var->green.length = 8;
++		var->blue.length = 8;
++		var->transp.length = 8;
++		break;
++	default:
++		ret = -EINVAL;
++		break;
++	}
++
++	/*
++	 * >= 16bpp displays have separate colour component bitfields
++	 * encoded in the pixel data.  Calculate their position from
++	 * the bitfield length defined above.
++	 */
++	if (ret == 0 && var->bits_per_pixel >= 24) {
++		var->red.offset = 0;
++		var->green.offset = var->red.offset + var->red.length;
++		var->blue.offset = var->green.offset + var->green.length;
++		var->transp.offset = var->blue.offset + var->blue.length;
++	} else if (ret == 0 && var->bits_per_pixel >= 16) {
++		var->blue.offset = 0;
++		var->green.offset = var->blue.offset + var->blue.length;
++		var->red.offset = var->green.offset + var->green.length;
++		var->transp.offset = var->red.offset + var->red.length;
++	}
++
++	return ret;
++}
++
++static int bcm2708_fb_check_var(struct fb_var_screeninfo *var,
++				struct fb_info *info)
++{
++	/* info input, var output */
++	int yres;
++
++	/* info input, var output */
++	print_debug("bcm2708_fb_check_var info(%p) %dx%d (%dx%d), %d, %d\n", info,
++		info->var.xres, info->var.yres, info->var.xres_virtual,
++		info->var.yres_virtual, (int)info->screen_size,
++		info->var.bits_per_pixel);
++	print_debug("bcm2708_fb_check_var var(%p) %dx%d (%dx%d), %d\n", var,
++		var->xres, var->yres, var->xres_virtual, var->yres_virtual,
++		var->bits_per_pixel);
++
++	if (!var->bits_per_pixel)
++		var->bits_per_pixel = 16;
++
++	if (bcm2708_fb_set_bitfields(var) != 0) {
++		pr_err("bcm2708_fb_check_var: invalid bits_per_pixel %d\n",
++		     var->bits_per_pixel);
++		return -EINVAL;
++	}
++
++
++	if (var->xres_virtual < var->xres)
++		var->xres_virtual = var->xres;
++	/* use highest possible virtual resolution */
++	if (var->yres_virtual == -1) {
++		var->yres_virtual = 480;
++
++		pr_err
++		    ("bcm2708_fb_check_var: virtual resolution set to maximum of %dx%d\n",
++		     var->xres_virtual, var->yres_virtual);
++	}
++	if (var->yres_virtual < var->yres)
++		var->yres_virtual = var->yres;
++
++	if (var->xoffset < 0)
++		var->xoffset = 0;
++	if (var->yoffset < 0)
++		var->yoffset = 0;
++
++	/* truncate xoffset and yoffset to maximum if too high */
++	if (var->xoffset > var->xres_virtual - var->xres)
++		var->xoffset = var->xres_virtual - var->xres - 1;
++	if (var->yoffset > var->yres_virtual - var->yres)
++		var->yoffset = var->yres_virtual - var->yres - 1;
++
++	yres = var->yres;
++	if (var->vmode & FB_VMODE_DOUBLE)
++		yres *= 2;
++	else if (var->vmode & FB_VMODE_INTERLACED)
++		yres = (yres + 1) / 2;
++
++	if (yres > 1200) {
++		pr_err("bcm2708_fb_check_var: ERROR: VerticalTotal >= 1200; "
++		       "special treatment required! (TODO)\n");
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++static int bcm2708_fb_set_par(struct fb_info *info)
++{
++	uint32_t val = 0;
++	struct bcm2708_fb *fb = to_bcm2708(info);
++	volatile struct fbinfo_s *fbinfo = fb->info;
++	fbinfo->xres = info->var.xres;
++	fbinfo->yres = info->var.yres;
++	fbinfo->xres_virtual = info->var.xres_virtual;
++	fbinfo->yres_virtual = info->var.yres_virtual;
++	fbinfo->bpp = info->var.bits_per_pixel;
++	fbinfo->xoffset = info->var.xoffset;
++	fbinfo->yoffset = info->var.yoffset;
++	fbinfo->base = 0;	/* filled in by VC */
++	fbinfo->pitch = 0;	/* filled in by VC */
++
++	print_debug("bcm2708_fb_set_par info(%p) %dx%d (%dx%d), %d, %d\n", info,
++		info->var.xres, info->var.yres, info->var.xres_virtual,
++		info->var.yres_virtual, (int)info->screen_size,
++		info->var.bits_per_pixel);
++
++	/* ensure last write to fbinfo is visible to GPU */
++	wmb();
++
++	/* inform vc about new framebuffer */
++	bcm_mailbox_write(MBOX_CHAN_FB, fb->dma);
++
++	/* TODO: replace fb driver with vchiq version */
++	/* wait for response */
++	bcm_mailbox_read(MBOX_CHAN_FB, &val);
++
++	/* ensure GPU writes are visible to us */
++	rmb();
++
++        if (val == 0) {
++		fb->fb.fix.line_length = fbinfo->pitch;
++
++		if (info->var.bits_per_pixel <= 8)
++			fb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
++		else
++			fb->fb.fix.visual = FB_VISUAL_TRUECOLOR;
++
++		fb->fb.fix.smem_start = fbinfo->base;
++		fb->fb.fix.smem_len = fbinfo->pitch * fbinfo->yres_virtual;
++		fb->fb.screen_size = fbinfo->screen_size;
++		if (fb->fb.screen_base)
++			iounmap(fb->fb.screen_base);
++		fb->fb.screen_base =
++			(void *)ioremap_wc(fb->fb.fix.smem_start, fb->fb.screen_size);
++		if (!fb->fb.screen_base) {
++			/* the console may currently be locked */
++			console_trylock();
++			console_unlock();
++
++			BUG();		/* what can we do here */
++		}
++	}
++	print_debug
++	    ("BCM2708FB: start = %p,%p width=%d, height=%d, bpp=%d, pitch=%d size=%d success=%d\n",
++	     (void *)fb->fb.screen_base, (void *)fb->fb.fix.smem_start,
++	     fbinfo->xres, fbinfo->yres, fbinfo->bpp,
++	     fbinfo->pitch, (int)fb->fb.screen_size, val);
++
++	return val;
++}
++
++static inline u32 convert_bitfield(int val, struct fb_bitfield *bf)
++{
++	unsigned int mask = (1 << bf->length) - 1;
++
++	return (val >> (16 - bf->length) & mask) << bf->offset;
++}
++
++
++static int bcm2708_fb_setcolreg(unsigned int regno, unsigned int red,
++				unsigned int green, unsigned int blue,
++				unsigned int transp, struct fb_info *info)
++{
++	struct bcm2708_fb *fb = to_bcm2708(info);
++
++	/*print_debug("BCM2708FB: setcolreg %d:(%02x,%02x,%02x,%02x) %x\n", regno, red, green, blue, transp, fb->fb.fix.visual);*/
++	if (fb->fb.var.bits_per_pixel <= 8) {
++		if (regno < 256) {
++			/* blue [0:4], green [5:10], red [11:15] */
++			fb->info->cmap[regno] = ((red   >> (16-5)) & 0x1f) << 11 |
++						((green >> (16-6)) & 0x3f) << 5 |
++						((blue  >> (16-5)) & 0x1f) << 0;
++		}
++		/* Hack: we need to tell GPU the palette has changed, but currently bcm2708_fb_set_par takes noticable time when called for every (256) colour */
++		/* So just call it for what looks like the last colour in a list for now. */
++		if (regno == 15 || regno == 255)
++			bcm2708_fb_set_par(info);
++        } else if (regno < 16) {
++		fb->cmap[regno] = convert_bitfield(transp, &fb->fb.var.transp) |
++		    convert_bitfield(blue, &fb->fb.var.blue) |
++		    convert_bitfield(green, &fb->fb.var.green) |
++		    convert_bitfield(red, &fb->fb.var.red);
++	}
++	return regno > 255;
++}
++
++static int bcm2708_fb_blank(int blank_mode, struct fb_info *info)
++{
++	/*print_debug("bcm2708_fb_blank\n"); */
++	return -1;
++}
++
++static void bcm2708_fb_fillrect(struct fb_info *info,
++				const struct fb_fillrect *rect)
++{
++	/* (is called) print_debug("bcm2708_fb_fillrect\n"); */
++	cfb_fillrect(info, rect);
++}
++
++/* A helper function for configuring dma control block */
++static void set_dma_cb(struct bcm2708_dma_cb *cb,
++		       int        burst_size,
++		       dma_addr_t dst,
++		       int        dst_stride,
++		       dma_addr_t src,
++		       int        src_stride,
++		       int        w,
++		       int        h)
++{
++	cb->info = BCM2708_DMA_BURST(burst_size) | BCM2708_DMA_S_WIDTH |
++		   BCM2708_DMA_S_INC | BCM2708_DMA_D_WIDTH |
++		   BCM2708_DMA_D_INC | BCM2708_DMA_TDMODE;
++	cb->dst = dst;
++	cb->src = src;
++	/*
++	 * This is not really obvious from the DMA documentation,
++	 * but the top 16 bits must be programmmed to "height -1"
++	 * and not "height" in 2D mode.
++	 */
++	cb->length = ((h - 1) << 16) | w;
++	cb->stride = ((dst_stride - w) << 16) | (u16)(src_stride - w);
++	cb->pad[0] = 0;
++	cb->pad[1] = 0;
++}
++
++static void bcm2708_fb_copyarea(struct fb_info *info,
++				const struct fb_copyarea *region)
++{
++	struct bcm2708_fb *fb = to_bcm2708(info);
++	struct bcm2708_dma_cb *cb = fb->cb_base;
++	int bytes_per_pixel = (info->var.bits_per_pixel + 7) >> 3;
++	/* Channel 0 supports larger bursts and is a bit faster */
++	int burst_size = (fb->dma_chan == 0) ? 8 : 2;
++
++	/* Fallback to cfb_copyarea() if we don't like something */
++	if (bytes_per_pixel > 4 ||
++	    info->var.xres > 1920 || info->var.yres > 1200 ||
++	    region->width <= 0 || region->width > info->var.xres ||
++	    region->height <= 0 || region->height > info->var.yres ||
++	    region->sx < 0 || region->sx >= info->var.xres ||
++	    region->sy < 0 || region->sy >= info->var.yres ||
++	    region->dx < 0 || region->dx >= info->var.xres ||
++	    region->dy < 0 || region->dy >= info->var.yres ||
++	    region->sx + region->width > info->var.xres ||
++	    region->dx + region->width > info->var.xres ||
++	    region->sy + region->height > info->var.yres ||
++	    region->dy + region->height > info->var.yres) {
++		cfb_copyarea(info, region);
++		return;
++	}
++
++	if (region->dy == region->sy && region->dx > region->sx) {
++		/*
++		 * A difficult case of overlapped copy. Because DMA can't
++		 * copy individual scanlines in backwards direction, we need
++		 * two-pass processing. We do it by programming a chain of dma
++		 * control blocks in the first 16K part of the buffer and use
++		 * the remaining 48K as the intermediate temporary scratch
++		 * buffer. The buffer size is sufficient to handle up to
++		 * 1920x1200 resolution at 32bpp pixel depth.
++		 */
++		int y;
++		dma_addr_t control_block_pa = fb->cb_handle;
++		dma_addr_t scratchbuf = fb->cb_handle + 16 * 1024;
++		int scanline_size = bytes_per_pixel * region->width;
++		int scanlines_per_cb = (64 * 1024 - 16 * 1024) / scanline_size;
++
++		for (y = 0; y < region->height; y += scanlines_per_cb) {
++			dma_addr_t src =
++				fb->fb.fix.smem_start +
++				bytes_per_pixel * region->sx +
++				(region->sy + y) * fb->fb.fix.line_length;
++			dma_addr_t dst =
++				fb->fb.fix.smem_start +
++				bytes_per_pixel * region->dx +
++				(region->dy + y) * fb->fb.fix.line_length;
++
++			if (region->height - y < scanlines_per_cb)
++				scanlines_per_cb = region->height - y;
++
++			set_dma_cb(cb, burst_size, scratchbuf, scanline_size,
++				   src, fb->fb.fix.line_length,
++				   scanline_size, scanlines_per_cb);
++			control_block_pa += sizeof(struct bcm2708_dma_cb);
++			cb->next = control_block_pa;
++			cb++;
++
++			set_dma_cb(cb, burst_size, dst, fb->fb.fix.line_length,
++				   scratchbuf, scanline_size,
++				   scanline_size, scanlines_per_cb);
++			control_block_pa += sizeof(struct bcm2708_dma_cb);
++			cb->next = control_block_pa;
++			cb++;
++		}
++		/* move the pointer back to the last dma control block */
++		cb--;
++	} else {
++		/* A single dma control block is enough. */
++		int sy, dy, stride;
++		if (region->dy <= region->sy) {
++			/* processing from top to bottom */
++			dy = region->dy;
++			sy = region->sy;
++			stride = fb->fb.fix.line_length;
++		} else {
++			/* processing from bottom to top */
++			dy = region->dy + region->height - 1;
++			sy = region->sy + region->height - 1;
++			stride = -fb->fb.fix.line_length;
++		}
++		set_dma_cb(cb, burst_size,
++			   fb->fb.fix.smem_start + dy * fb->fb.fix.line_length +
++						   bytes_per_pixel * region->dx,
++			   stride,
++			   fb->fb.fix.smem_start + sy * fb->fb.fix.line_length +
++						   bytes_per_pixel * region->sx,
++			   stride,
++			   region->width * bytes_per_pixel,
++			   region->height);
++	}
++
++	/* end of dma control blocks chain */
++	cb->next = 0;
++
++	bcm_dma_start(fb->dma_chan_base, fb->cb_handle);
++	bcm_dma_wait_idle(fb->dma_chan_base);
++}
++
++static void bcm2708_fb_imageblit(struct fb_info *info,
++				 const struct fb_image *image)
++{
++	/* (is called) print_debug("bcm2708_fb_imageblit\n"); */
++	cfb_imageblit(info, image);
++}
++
++static struct fb_ops bcm2708_fb_ops = {
++	.owner = THIS_MODULE,
++	.fb_check_var = bcm2708_fb_check_var,
++	.fb_set_par = bcm2708_fb_set_par,
++	.fb_setcolreg = bcm2708_fb_setcolreg,
++	.fb_blank = bcm2708_fb_blank,
++	.fb_fillrect = bcm2708_fb_fillrect,
++	.fb_copyarea = bcm2708_fb_copyarea,
++	.fb_imageblit = bcm2708_fb_imageblit,
++};
++
++static int fbwidth = 800;	/* module parameter */
++static int fbheight = 480;	/* module parameter */
++static int fbdepth = 16;	/* module parameter */
++
++static int bcm2708_fb_register(struct bcm2708_fb *fb)
++{
++	int ret;
++	dma_addr_t dma;
++	void *mem;
++
++	mem =
++	    dma_alloc_coherent(NULL, PAGE_ALIGN(sizeof(*fb->info)), &dma,
++			       GFP_KERNEL);
++
++	if (NULL == mem) {
++		pr_err(": unable to allocate fbinfo buffer\n");
++		ret = -ENOMEM;
++	} else {
++		fb->info = (struct fbinfo_s *)mem;
++		fb->dma = dma;
++	}
++	fb->fb.fbops = &bcm2708_fb_ops;
++	fb->fb.flags = FBINFO_FLAG_DEFAULT | FBINFO_HWACCEL_COPYAREA;
++	fb->fb.pseudo_palette = fb->cmap;
++
++	strncpy(fb->fb.fix.id, bcm2708_name, sizeof(fb->fb.fix.id));
++	fb->fb.fix.type = FB_TYPE_PACKED_PIXELS;
++	fb->fb.fix.type_aux = 0;
++	fb->fb.fix.xpanstep = 0;
++	fb->fb.fix.ypanstep = 0;
++	fb->fb.fix.ywrapstep = 0;
++	fb->fb.fix.accel = FB_ACCEL_NONE;
++
++	fb->fb.var.xres = fbwidth;
++	fb->fb.var.yres = fbheight;
++	fb->fb.var.xres_virtual = fbwidth;
++	fb->fb.var.yres_virtual = fbheight;
++	fb->fb.var.bits_per_pixel = fbdepth;
++	fb->fb.var.vmode = FB_VMODE_NONINTERLACED;
++	fb->fb.var.activate = FB_ACTIVATE_NOW;
++	fb->fb.var.nonstd = 0;
++	fb->fb.var.height = -1;		/* height of picture in mm    */
++	fb->fb.var.width = -1;		/* width of picture in mm    */
++	fb->fb.var.accel_flags = 0;
++
++	fb->fb.monspecs.hfmin = 0;
++	fb->fb.monspecs.hfmax = 100000;
++	fb->fb.monspecs.vfmin = 0;
++	fb->fb.monspecs.vfmax = 400;
++	fb->fb.monspecs.dclkmin = 1000000;
++	fb->fb.monspecs.dclkmax = 100000000;
++
++	bcm2708_fb_set_bitfields(&fb->fb.var);
++
++	/*
++	 * Allocate colourmap.
++	 */
++
++	fb_set_var(&fb->fb, &fb->fb.var);
++
++	print_debug("BCM2708FB: registering framebuffer (%dx%d@%d)\n", fbwidth,
++		fbheight, fbdepth);
++
++	ret = register_framebuffer(&fb->fb);
++	print_debug("BCM2708FB: register framebuffer (%d)\n", ret);
++	if (ret == 0)
++		goto out;
++
++	print_debug("BCM2708FB: cannot register framebuffer (%d)\n", ret);
++out:
++	return ret;
++}
++
++static int bcm2708_fb_probe(struct platform_device *dev)
++{
++	struct bcm2708_fb *fb;
++	int ret;
++
++	fb = kmalloc(sizeof(struct bcm2708_fb), GFP_KERNEL);
++	if (!fb) {
++		dev_err(&dev->dev,
++			"could not allocate new bcm2708_fb struct\n");
++		ret = -ENOMEM;
++		goto free_region;
++	}
++	memset(fb, 0, sizeof(struct bcm2708_fb));
++
++	fb->cb_base = dma_alloc_writecombine(&dev->dev, SZ_64K,
++					     &fb->cb_handle, GFP_KERNEL);
++	if (!fb->cb_base) {
++		dev_err(&dev->dev, "cannot allocate DMA CBs\n");
++		ret = -ENOMEM;
++		goto free_fb;
++	}
++
++	pr_info("BCM2708FB: allocated DMA memory %08x\n",
++	       fb->cb_handle);
++
++	ret = bcm_dma_chan_alloc(BCM_DMA_FEATURE_BULK,
++				 &fb->dma_chan_base, &fb->dma_irq);
++	if (ret < 0) {
++		dev_err(&dev->dev, "couldn't allocate a DMA channel\n");
++		goto free_cb;
++	}
++	fb->dma_chan = ret;
++
++	pr_info("BCM2708FB: allocated DMA channel %d @ %p\n",
++	       fb->dma_chan, fb->dma_chan_base);
++
++	fb->dev = dev;
++
++	ret = bcm2708_fb_register(fb);
++	if (ret == 0) {
++		platform_set_drvdata(dev, fb);
++		goto out;
++	}
++
++free_cb:
++	dma_free_writecombine(&dev->dev, SZ_64K, fb->cb_base, fb->cb_handle);
++free_fb:
++	kfree(fb);
++free_region:
++	dev_err(&dev->dev, "probe failed, err %d\n", ret);
++out:
++	return ret;
++}
++
++static int bcm2708_fb_remove(struct platform_device *dev)
++{
++	struct bcm2708_fb *fb = platform_get_drvdata(dev);
++
++	platform_set_drvdata(dev, NULL);
++
++	if (fb->fb.screen_base)
++		iounmap(fb->fb.screen_base);
++	unregister_framebuffer(&fb->fb);
++
++	dma_free_writecombine(&dev->dev, SZ_64K, fb->cb_base, fb->cb_handle);
++	bcm_dma_chan_free(fb->dma_chan);
++
++	dma_free_coherent(NULL, PAGE_ALIGN(sizeof(*fb->info)), (void *)fb->info,
++			  fb->dma);
++	kfree(fb);
++
++	return 0;
++}
++
++static struct platform_driver bcm2708_fb_driver = {
++	.probe = bcm2708_fb_probe,
++	.remove = bcm2708_fb_remove,
++	.driver = {
++		   .name = DRIVER_NAME,
++		   .owner = THIS_MODULE,
++		   },
++};
++
++static int __init bcm2708_fb_init(void)
++{
++	return platform_driver_register(&bcm2708_fb_driver);
++}
++
++module_init(bcm2708_fb_init);
++
++static void __exit bcm2708_fb_exit(void)
++{
++	platform_driver_unregister(&bcm2708_fb_driver);
++}
++
++module_exit(bcm2708_fb_exit);
++
++module_param(fbwidth, int, 0644);
++module_param(fbheight, int, 0644);
++module_param(fbdepth, int, 0644);
++
++MODULE_DESCRIPTION("BCM2708 framebuffer driver");
++MODULE_LICENSE("GPL");
++
++MODULE_PARM_DESC(fbwidth, "Width of ARM Framebuffer");
++MODULE_PARM_DESC(fbheight, "Height of ARM Framebuffer");
++MODULE_PARM_DESC(fbdepth, "Bit depth of ARM Framebuffer");
+diff -Nur linux-3.12.6/drivers/video/cfbimgblt.c linux-raspberry-pi/drivers/video/cfbimgblt.c
+--- linux-3.12.6/drivers/video/cfbimgblt.c	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/video/cfbimgblt.c	2013-12-29 10:41:47.000000000 +0100
+@@ -28,6 +28,11 @@
+  *
+  *  Also need to add code to deal with cards endians that are different than
+  *  the native cpu endians. I also need to deal with MSB position in the word.
++ *  Modified by Harm Hanemaaijer (fgenfb@yahoo.com) 2013:
++ *  - Provide optimized versions of fast_imageblit for 16 and 32bpp that are
++ *    significantly faster than the previous implementation.
++ *  - Simplify the fast/slow_imageblit selection code, avoiding integer
++ *    divides.
+  */
+ #include <linux/module.h>
+ #include <linux/string.h>
+@@ -262,6 +267,133 @@
+ 	}
+ }	
+ 	
++/*
++ * Optimized fast_imageblit for bpp == 16. ppw = 2, bit_mask = 3 folded
++ * into the code, main loop unrolled.
++ */
++
++static inline void fast_imageblit16(const struct fb_image *image,
++				    struct fb_info *p, u8 __iomem * dst1,
++				    u32 fgcolor, u32 bgcolor)
++{
++	u32 fgx = fgcolor, bgx = bgcolor;
++	u32 spitch = (image->width + 7) / 8;
++	u32 end_mask, eorx;
++	const char *s = image->data, *src;
++	u32 __iomem *dst;
++	const u32 *tab = NULL;
++	int i, j, k;
++
++	tab = fb_be_math(p) ? cfb_tab16_be : cfb_tab16_le;
++
++	fgx <<= 16;
++	bgx <<= 16;
++	fgx |= fgcolor;
++	bgx |= bgcolor;
++
++	eorx = fgx ^ bgx;
++	k = image->width / 2;
++
++	for (i = image->height; i--;) {
++		dst = (u32 __iomem *) dst1;
++		src = s;
++
++		j = k;
++		while (j >= 4) {
++			u8 bits = *src;
++			end_mask = tab[(bits >> 6) & 3];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++			end_mask = tab[(bits >> 4) & 3];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++			end_mask = tab[(bits >> 2) & 3];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++			end_mask = tab[bits & 3];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++			src++;
++			j -= 4;
++		}
++		if (j != 0) {
++			u8 bits = *src;
++			end_mask = tab[(bits >> 6) & 3];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++			if (j >= 2) {
++				end_mask = tab[(bits >> 4) & 3];
++				FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++				if (j == 3) {
++					end_mask = tab[(bits >> 2) & 3];
++					FB_WRITEL((end_mask & eorx) ^ bgx, dst);
++				}
++			}
++		}
++		dst1 += p->fix.line_length;
++		s += spitch;
++	}
++}
++
++/*
++ * Optimized fast_imageblit for bpp == 32. ppw = 1, bit_mask = 1 folded
++ * into the code, main loop unrolled.
++ */
++
++static inline void fast_imageblit32(const struct fb_image *image,
++				    struct fb_info *p, u8 __iomem * dst1,
++				    u32 fgcolor, u32 bgcolor)
++{
++	u32 fgx = fgcolor, bgx = bgcolor;
++	u32 spitch = (image->width + 7) / 8;
++	u32 end_mask, eorx;
++	const char *s = image->data, *src;
++	u32 __iomem *dst;
++	const u32 *tab = NULL;
++	int i, j, k;
++
++	tab = cfb_tab32;
++
++	eorx = fgx ^ bgx;
++	k = image->width;
++
++	for (i = image->height; i--;) {
++		dst = (u32 __iomem *) dst1;
++		src = s;
++
++		j = k;
++		while (j >= 8) {
++			u8 bits = *src;
++			end_mask = tab[(bits >> 7) & 1];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++			end_mask = tab[(bits >> 6) & 1];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++			end_mask = tab[(bits >> 5) & 1];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++			end_mask = tab[(bits >> 4) & 1];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++			end_mask = tab[(bits >> 3) & 1];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++			end_mask = tab[(bits >> 2) & 1];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++			end_mask = tab[(bits >> 1) & 1];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++			end_mask = tab[bits & 1];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++			src++;
++			j -= 8;
++		}
++		if (j != 0) {
++			u32 bits = (u32) * src;
++			while (j > 1) {
++				end_mask = tab[(bits >> 7) & 1];
++				FB_WRITEL((end_mask & eorx) ^ bgx, dst++);
++				bits <<= 1;
++				j--;
++			}
++			end_mask = tab[(bits >> 7) & 1];
++			FB_WRITEL((end_mask & eorx) ^ bgx, dst);
++		}
++		dst1 += p->fix.line_length;
++		s += spitch;
++	}
++}
++
+ void cfb_imageblit(struct fb_info *p, const struct fb_image *image)
+ {
+ 	u32 fgcolor, bgcolor, start_index, bitstart, pitch_index = 0;
+@@ -294,11 +426,21 @@
+ 			bgcolor = image->bg_color;
+ 		}	
+ 		
+-		if (32 % bpp == 0 && !start_index && !pitch_index && 
+-		    ((width & (32/bpp-1)) == 0) &&
+-		    bpp >= 8 && bpp <= 32) 			
+-			fast_imageblit(image, p, dst1, fgcolor, bgcolor);
+-		else 
++		if (!start_index && !pitch_index) {
++			if (bpp == 32)
++				fast_imageblit32(image, p, dst1, fgcolor,
++						 bgcolor);
++			else if (bpp == 16 && (width & 1) == 0)
++				fast_imageblit16(image, p, dst1, fgcolor,
++						 bgcolor);
++			else if (bpp == 8 && (width & 3) == 0)
++				fast_imageblit(image, p, dst1, fgcolor,
++					       bgcolor);
++			else
++				slow_imageblit(image, p, dst1, fgcolor,
++					       bgcolor,
++					       start_index, pitch_index);
++		} else
+ 			slow_imageblit(image, p, dst1, fgcolor, bgcolor,
+ 					start_index, pitch_index);
+ 	} else
+diff -Nur linux-3.12.6/drivers/video/fbmem.c linux-raspberry-pi/drivers/video/fbmem.c
+--- linux-3.12.6/drivers/video/fbmem.c	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/video/fbmem.c	2013-12-29 10:41:47.000000000 +0100
+@@ -1083,6 +1083,25 @@
+ }
+ EXPORT_SYMBOL(fb_blank);
+ 
++static int fb_copyarea_user(struct fb_info *info,
++			    struct fb_copyarea *copy)
++{
++	int ret = 0;
++	if (!lock_fb_info(info))
++		return -ENODEV;
++	if (copy->dx + copy->width > info->var.xres ||
++	    copy->sx + copy->width > info->var.xres ||
++	    copy->dy + copy->height > info->var.yres ||
++	    copy->sy + copy->height > info->var.yres) {
++		ret = -EINVAL;
++		goto out;
++	}
++	info->fbops->fb_copyarea(info, copy);
++out:
++	unlock_fb_info(info);
++	return ret;
++}
++
+ static long do_fb_ioctl(struct fb_info *info, unsigned int cmd,
+ 			unsigned long arg)
+ {
+@@ -1093,6 +1112,7 @@
+ 	struct fb_cmap cmap_from;
+ 	struct fb_cmap_user cmap;
+ 	struct fb_event event;
++	struct fb_copyarea copy;
+ 	void __user *argp = (void __user *)arg;
+ 	long ret = 0;
+ 
+@@ -1202,6 +1222,15 @@
+ 		console_unlock();
+ 		unlock_fb_info(info);
+ 		break;
++	case FBIOCOPYAREA:
++		if (info->flags & FBINFO_HWACCEL_COPYAREA) {
++			/* only provide this ioctl if it is accelerated */
++			if (copy_from_user(&copy, argp, sizeof(copy)))
++				return -EFAULT;
++			ret = fb_copyarea_user(info, &copy);
++			break;
++		}
++		/* fall through */
+ 	default:
+ 		if (!lock_fb_info(info))
+ 			return -ENODEV;
+@@ -1356,6 +1385,7 @@
+ 	case FBIOPAN_DISPLAY:
+ 	case FBIOGET_CON2FBMAP:
+ 	case FBIOPUT_CON2FBMAP:
++	case FBIOCOPYAREA:
+ 		arg = (unsigned long) compat_ptr(arg);
+ 	case FBIOBLANK:
+ 		ret = do_fb_ioctl(info, cmd, arg);
+diff -Nur linux-3.12.6/drivers/video/Kconfig linux-raspberry-pi/drivers/video/Kconfig
+--- linux-3.12.6/drivers/video/Kconfig	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/video/Kconfig	2013-12-29 10:41:47.000000000 +0100
+@@ -310,6 +310,20 @@
+ 	help
+ 	  Support the Permedia2 FIFO disconnect feature.
+ 
++config FB_BCM2708
++	tristate "BCM2708 framebuffer support"
++	depends on FB && ARM
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This framebuffer device driver is for the BCM2708 framebuffer.
++
++	  If you want to compile this as a module (=code which can be
++	  inserted into and removed from the running kernel), say M
++	  here and read <file:Documentation/kbuild/modules.txt>.  The module
++	  will be called bcm2708_fb.
++
+ config FB_ARMCLCD
+ 	tristate "ARM PrimeCell PL110 support"
+ 	depends on FB && ARM && ARM_AMBA
+diff -Nur linux-3.12.6/drivers/video/logo/logo_linux_clut224.ppm linux-raspberry-pi/drivers/video/logo/logo_linux_clut224.ppm
+--- linux-3.12.6/drivers/video/logo/logo_linux_clut224.ppm	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/video/logo/logo_linux_clut224.ppm	2013-12-29 10:41:47.000000000 +0100
+@@ -1,1604 +1,883 @@
+ P3
+-# Standard 224-color Linux logo
+-80 80
++63 80
+ 255
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  6   6   6   6   6   6  10  10  10  10  10  10
+- 10  10  10   6   6   6   6   6   6   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   6   6   6  10  10  10  14  14  14
+- 22  22  22  26  26  26  30  30  30  34  34  34
+- 30  30  30  30  30  30  26  26  26  18  18  18
+- 14  14  14  10  10  10   6   6   6   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   1   0   0   1   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  6   6   6  14  14  14  26  26  26  42  42  42
+- 54  54  54  66  66  66  78  78  78  78  78  78
+- 78  78  78  74  74  74  66  66  66  54  54  54
+- 42  42  42  26  26  26  18  18  18  10  10  10
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   1   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 22  22  22  42  42  42  66  66  66  86  86  86
+- 66  66  66  38  38  38  38  38  38  22  22  22
+- 26  26  26  34  34  34  54  54  54  66  66  66
+- 86  86  86  70  70  70  46  46  46  26  26  26
+- 14  14  14   6   6   6   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   1   0   0   1   0   0   1   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0  10  10  10  26  26  26
+- 50  50  50  82  82  82  58  58  58   6   6   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  6   6   6  54  54  54  86  86  86  66  66  66
+- 38  38  38  18  18  18   6   6   6   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   6   6   6  22  22  22  50  50  50
+- 78  78  78  34  34  34   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   6   6   6  70  70  70
+- 78  78  78  46  46  46  22  22  22   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   1   0   0   1   0   0   1   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  6   6   6  18  18  18  42  42  42  82  82  82
+- 26  26  26   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6  14  14  14
+- 46  46  46  34  34  34   6   6   6   2   2   6
+- 42  42  42  78  78  78  42  42  42  18  18  18
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   1   0   0   0   0   0   1   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+- 10  10  10  30  30  30  66  66  66  58  58  58
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6  26  26  26
+- 86  86  86 101 101 101  46  46  46  10  10  10
+-  2   2   6  58  58  58  70  70  70  34  34  34
+- 10  10  10   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   1   0   0   1   0   0   1   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+- 14  14  14  42  42  42  86  86  86  10  10  10
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6  30  30  30
+- 94  94  94  94  94  94  58  58  58  26  26  26
+-  2   2   6   6   6   6  78  78  78  54  54  54
+- 22  22  22   6   6   6   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   6   6   6
+- 22  22  22  62  62  62  62  62  62   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6  26  26  26
+- 54  54  54  38  38  38  18  18  18  10  10  10
+-  2   2   6   2   2   6  34  34  34  82  82  82
+- 38  38  38  14  14  14   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   1   0   0   1   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   6   6   6
+- 30  30  30  78  78  78  30  30  30   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6  10  10  10
+- 10  10  10   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6  78  78  78
+- 50  50  50  18  18  18   6   6   6   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   1   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 38  38  38  86  86  86  14  14  14   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6  54  54  54
+- 66  66  66  26  26  26   6   6   6   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   1   0   0   1   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  14  14  14
+- 42  42  42  82  82  82   2   2   6   2   2   6
+-  2   2   6   6   6   6  10  10  10   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   6   6   6
+- 14  14  14  10  10  10   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6  18  18  18
+- 82  82  82  34  34  34  10  10  10   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   1   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  14  14  14
+- 46  46  46  86  86  86   2   2   6   2   2   6
+-  6   6   6   6   6   6  22  22  22  34  34  34
+-  6   6   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6  18  18  18  34  34  34
+- 10  10  10  50  50  50  22  22  22   2   2   6
+-  2   2   6   2   2   6   2   2   6  10  10  10
+- 86  86  86  42  42  42  14  14  14   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   1   0   0   1   0   0   1   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  14  14  14
+- 46  46  46  86  86  86   2   2   6   2   2   6
+- 38  38  38 116 116 116  94  94  94  22  22  22
+- 22  22  22   2   2   6   2   2   6   2   2   6
+- 14  14  14  86  86  86 138 138 138 162 162 162
+-154 154 154  38  38  38  26  26  26   6   6   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 86  86  86  46  46  46  14  14  14   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  14  14  14
+- 46  46  46  86  86  86   2   2   6  14  14  14
+-134 134 134 198 198 198 195 195 195 116 116 116
+- 10  10  10   2   2   6   2   2   6   6   6   6
+-101  98  89 187 187 187 210 210 210 218 218 218
+-214 214 214 134 134 134  14  14  14   6   6   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 86  86  86  50  50  50  18  18  18   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   1   0   0   0
+-  0   0   1   0   0   1   0   0   1   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  14  14  14
+- 46  46  46  86  86  86   2   2   6  54  54  54
+-218 218 218 195 195 195 226 226 226 246 246 246
+- 58  58  58   2   2   6   2   2   6  30  30  30
+-210 210 210 253 253 253 174 174 174 123 123 123
+-221 221 221 234 234 234  74  74  74   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 70  70  70  58  58  58  22  22  22   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  14  14  14
+- 46  46  46  82  82  82   2   2   6 106 106 106
+-170 170 170  26  26  26  86  86  86 226 226 226
+-123 123 123  10  10  10  14  14  14  46  46  46
+-231 231 231 190 190 190   6   6   6  70  70  70
+- 90  90  90 238 238 238 158 158 158   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 70  70  70  58  58  58  22  22  22   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   1   0   0   0
+-  0   0   1   0   0   1   0   0   1   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  14  14  14
+- 42  42  42  86  86  86   6   6   6 116 116 116
+-106 106 106   6   6   6  70  70  70 149 149 149
+-128 128 128  18  18  18  38  38  38  54  54  54
+-221 221 221 106 106 106   2   2   6  14  14  14
+- 46  46  46 190 190 190 198 198 198   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 74  74  74  62  62  62  22  22  22   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   1   0   0   0
+-  0   0   1   0   0   0   0   0   1   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  14  14  14
+- 42  42  42  94  94  94  14  14  14 101 101 101
+-128 128 128   2   2   6  18  18  18 116 116 116
+-118  98  46 121  92   8 121  92   8  98  78  10
+-162 162 162 106 106 106   2   2   6   2   2   6
+-  2   2   6 195 195 195 195 195 195   6   6   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 74  74  74  62  62  62  22  22  22   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   1   0   0   1
+-  0   0   1   0   0   0   0   0   1   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 38  38  38  90  90  90  14  14  14  58  58  58
+-210 210 210  26  26  26  54  38   6 154 114  10
+-226 170  11 236 186  11 225 175  15 184 144  12
+-215 174  15 175 146  61  37  26   9   2   2   6
+- 70  70  70 246 246 246 138 138 138   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 70  70  70  66  66  66  26  26  26   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 38  38  38  86  86  86  14  14  14  10  10  10
+-195 195 195 188 164 115 192 133   9 225 175  15
+-239 182  13 234 190  10 232 195  16 232 200  30
+-245 207  45 241 208  19 232 195  16 184 144  12
+-218 194 134 211 206 186  42  42  42   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 50  50  50  74  74  74  30  30  30   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 34  34  34  86  86  86  14  14  14   2   2   6
+-121  87  25 192 133   9 219 162  10 239 182  13
+-236 186  11 232 195  16 241 208  19 244 214  54
+-246 218  60 246 218  38 246 215  20 241 208  19
+-241 208  19 226 184  13 121  87  25   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 50  50  50  82  82  82  34  34  34  10  10  10
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 34  34  34  82  82  82  30  30  30  61  42   6
+-180 123   7 206 145  10 230 174  11 239 182  13
+-234 190  10 238 202  15 241 208  19 246 218  74
+-246 218  38 246 215  20 246 215  20 246 215  20
+-226 184  13 215 174  15 184 144  12   6   6   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 26  26  26  94  94  94  42  42  42  14  14  14
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 30  30  30  78  78  78  50  50  50 104  69   6
+-192 133   9 216 158  10 236 178  12 236 186  11
+-232 195  16 241 208  19 244 214  54 245 215  43
+-246 215  20 246 215  20 241 208  19 198 155  10
+-200 144  11 216 158  10 156 118  10   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  6   6   6  90  90  90  54  54  54  18  18  18
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 30  30  30  78  78  78  46  46  46  22  22  22
+-137  92   6 210 162  10 239 182  13 238 190  10
+-238 202  15 241 208  19 246 215  20 246 215  20
+-241 208  19 203 166  17 185 133  11 210 150  10
+-216 158  10 210 150  10 102  78  10   2   2   6
+-  6   6   6  54  54  54  14  14  14   2   2   6
+-  2   2   6  62  62  62  74  74  74  30  30  30
+- 10  10  10   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 34  34  34  78  78  78  50  50  50   6   6   6
+- 94  70  30 139 102  15 190 146  13 226 184  13
+-232 200  30 232 195  16 215 174  15 190 146  13
+-168 122  10 192 133   9 210 150  10 213 154  11
+-202 150  34 182 157 106 101  98  89   2   2   6
+-  2   2   6  78  78  78 116 116 116  58  58  58
+-  2   2   6  22  22  22  90  90  90  46  46  46
+- 18  18  18   6   6   6   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 38  38  38  86  86  86  50  50  50   6   6   6
+-128 128 128 174 154 114 156 107  11 168 122  10
+-198 155  10 184 144  12 197 138  11 200 144  11
+-206 145  10 206 145  10 197 138  11 188 164 115
+-195 195 195 198 198 198 174 174 174  14  14  14
+-  2   2   6  22  22  22 116 116 116 116 116 116
+- 22  22  22   2   2   6  74  74  74  70  70  70
+- 30  30  30  10  10  10   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   6   6   6  18  18  18
+- 50  50  50 101 101 101  26  26  26  10  10  10
+-138 138 138 190 190 190 174 154 114 156 107  11
+-197 138  11 200 144  11 197 138  11 192 133   9
+-180 123   7 190 142  34 190 178 144 187 187 187
+-202 202 202 221 221 221 214 214 214  66  66  66
+-  2   2   6   2   2   6  50  50  50  62  62  62
+-  6   6   6   2   2   6  10  10  10  90  90  90
+- 50  50  50  18  18  18   6   6   6   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0  10  10  10  34  34  34
+- 74  74  74  74  74  74   2   2   6   6   6   6
+-144 144 144 198 198 198 190 190 190 178 166 146
+-154 121  60 156 107  11 156 107  11 168 124  44
+-174 154 114 187 187 187 190 190 190 210 210 210
+-246 246 246 253 253 253 253 253 253 182 182 182
+-  6   6   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6  62  62  62
+- 74  74  74  34  34  34  14  14  14   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0  10  10  10  22  22  22  54  54  54
+- 94  94  94  18  18  18   2   2   6  46  46  46
+-234 234 234 221 221 221 190 190 190 190 190 190
+-190 190 190 187 187 187 187 187 187 190 190 190
+-190 190 190 195 195 195 214 214 214 242 242 242
+-253 253 253 253 253 253 253 253 253 253 253 253
+- 82  82  82   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6  14  14  14
+- 86  86  86  54  54  54  22  22  22   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  6   6   6  18  18  18  46  46  46  90  90  90
+- 46  46  46  18  18  18   6   6   6 182 182 182
+-253 253 253 246 246 246 206 206 206 190 190 190
+-190 190 190 190 190 190 190 190 190 190 190 190
+-206 206 206 231 231 231 250 250 250 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-202 202 202  14  14  14   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 42  42  42  86  86  86  42  42  42  18  18  18
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   6   6   6
+- 14  14  14  38  38  38  74  74  74  66  66  66
+-  2   2   6   6   6   6  90  90  90 250 250 250
+-253 253 253 253 253 253 238 238 238 198 198 198
+-190 190 190 190 190 190 195 195 195 221 221 221
+-246 246 246 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253  82  82  82   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6  78  78  78  70  70  70  34  34  34
+- 14  14  14   6   6   6   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  14  14  14
+- 34  34  34  66  66  66  78  78  78   6   6   6
+-  2   2   6  18  18  18 218 218 218 253 253 253
+-253 253 253 253 253 253 253 253 253 246 246 246
+-226 226 226 231 231 231 246 246 246 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 178 178 178   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6  18  18  18  90  90  90  62  62  62
+- 30  30  30  10  10  10   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0  10  10  10  26  26  26
+- 58  58  58  90  90  90  18  18  18   2   2   6
+-  2   2   6 110 110 110 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-250 250 250 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 231 231 231  18  18  18   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6  18  18  18  94  94  94
+- 54  54  54  26  26  26  10  10  10   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   6   6   6  22  22  22  50  50  50
+- 90  90  90  26  26  26   2   2   6   2   2   6
+- 14  14  14 195 195 195 250 250 250 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-250 250 250 242 242 242  54  54  54   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6  38  38  38
+- 86  86  86  50  50  50  22  22  22   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  6   6   6  14  14  14  38  38  38  82  82  82
+- 34  34  34   2   2   6   2   2   6   2   2   6
+- 42  42  42 195 195 195 246 246 246 253 253 253
+-253 253 253 253 253 253 253 253 253 250 250 250
+-242 242 242 242 242 242 250 250 250 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 250 250 250 246 246 246 238 238 238
+-226 226 226 231 231 231 101 101 101   6   6   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 38  38  38  82  82  82  42  42  42  14  14  14
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+- 10  10  10  26  26  26  62  62  62  66  66  66
+-  2   2   6   2   2   6   2   2   6   6   6   6
+- 70  70  70 170 170 170 206 206 206 234 234 234
+-246 246 246 250 250 250 250 250 250 238 238 238
+-226 226 226 231 231 231 238 238 238 250 250 250
+-250 250 250 250 250 250 246 246 246 231 231 231
+-214 214 214 206 206 206 202 202 202 202 202 202
+-198 198 198 202 202 202 182 182 182  18  18  18
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6  62  62  62  66  66  66  30  30  30
+- 10  10  10   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+- 14  14  14  42  42  42  82  82  82  18  18  18
+-  2   2   6   2   2   6   2   2   6  10  10  10
+- 94  94  94 182 182 182 218 218 218 242 242 242
+-250 250 250 253 253 253 253 253 253 250 250 250
+-234 234 234 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 246 246 246
+-238 238 238 226 226 226 210 210 210 202 202 202
+-195 195 195 195 195 195 210 210 210 158 158 158
+-  6   6   6  14  14  14  50  50  50  14  14  14
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   6   6   6  86  86  86  46  46  46
+- 18  18  18   6   6   6   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   6   6   6
+- 22  22  22  54  54  54  70  70  70   2   2   6
+-  2   2   6  10  10  10   2   2   6  22  22  22
+-166 166 166 231 231 231 250 250 250 253 253 253
+-253 253 253 253 253 253 253 253 253 250 250 250
+-242 242 242 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 246 246 246
+-231 231 231 206 206 206 198 198 198 226 226 226
+- 94  94  94   2   2   6   6   6   6  38  38  38
+- 30  30  30   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6  62  62  62  66  66  66
+- 26  26  26  10  10  10   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 30  30  30  74  74  74  50  50  50   2   2   6
+- 26  26  26  26  26  26   2   2   6 106 106 106
+-238 238 238 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 246 246 246 218 218 218 202 202 202
+-210 210 210  14  14  14   2   2   6   2   2   6
+- 30  30  30  22  22  22   2   2   6   2   2   6
+-  2   2   6   2   2   6  18  18  18  86  86  86
+- 42  42  42  14  14  14   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  14  14  14
+- 42  42  42  90  90  90  22  22  22   2   2   6
+- 42  42  42   2   2   6  18  18  18 218 218 218
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 250 250 250 221 221 221
+-218 218 218 101 101 101   2   2   6  14  14  14
+- 18  18  18  38  38  38  10  10  10   2   2   6
+-  2   2   6   2   2   6   2   2   6  78  78  78
+- 58  58  58  22  22  22   6   6   6   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   6   6   6  18  18  18
+- 54  54  54  82  82  82   2   2   6  26  26  26
+- 22  22  22   2   2   6 123 123 123 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 250 250 250
+-238 238 238 198 198 198   6   6   6  38  38  38
+- 58  58  58  26  26  26  38  38  38   2   2   6
+-  2   2   6   2   2   6   2   2   6  46  46  46
+- 78  78  78  30  30  30  10  10  10   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0  10  10  10  30  30  30
+- 74  74  74  58  58  58   2   2   6  42  42  42
+-  2   2   6  22  22  22 231 231 231 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 250 250 250
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 246 246 246  46  46  46  38  38  38
+- 42  42  42  14  14  14  38  38  38  14  14  14
+-  2   2   6   2   2   6   2   2   6   6   6   6
+- 86  86  86  46  46  46  14  14  14   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   6   6   6  14  14  14  42  42  42
+- 90  90  90  18  18  18  18  18  18  26  26  26
+-  2   2   6 116 116 116 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 250 250 250 238 238 238
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253  94  94  94   6   6   6
+-  2   2   6   2   2   6  10  10  10  34  34  34
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 74  74  74  58  58  58  22  22  22   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0  10  10  10  26  26  26  66  66  66
+- 82  82  82   2   2   6  38  38  38   6   6   6
+- 14  14  14 210 210 210 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 246 246 246 242 242 242
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 144 144 144   2   2   6
+-  2   2   6   2   2   6   2   2   6  46  46  46
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 42  42  42  74  74  74  30  30  30  10  10  10
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  6   6   6  14  14  14  42  42  42  90  90  90
+- 26  26  26   6   6   6  42  42  42   2   2   6
+- 74  74  74 250 250 250 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 242 242 242 242 242 242
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 182 182 182   2   2   6
+-  2   2   6   2   2   6   2   2   6  46  46  46
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 10  10  10  86  86  86  38  38  38  10  10  10
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+- 10  10  10  26  26  26  66  66  66  82  82  82
+-  2   2   6  22  22  22  18  18  18   2   2   6
+-149 149 149 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 234 234 234 242 242 242
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 206 206 206   2   2   6
+-  2   2   6   2   2   6   2   2   6  38  38  38
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  6   6   6  86  86  86  46  46  46  14  14  14
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   6   6   6
+- 18  18  18  46  46  46  86  86  86  18  18  18
+-  2   2   6  34  34  34  10  10  10   6   6   6
+-210 210 210 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 234 234 234 242 242 242
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 221 221 221   6   6   6
+-  2   2   6   2   2   6   6   6   6  30  30  30
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6  82  82  82  54  54  54  18  18  18
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 26  26  26  66  66  66  62  62  62   2   2   6
+-  2   2   6  38  38  38  10  10  10  26  26  26
+-238 238 238 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 231 231 231 238 238 238
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 231 231 231   6   6   6
+-  2   2   6   2   2   6  10  10  10  30  30  30
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6  66  66  66  58  58  58  22  22  22
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 38  38  38  78  78  78   6   6   6   2   2   6
+-  2   2   6  46  46  46  14  14  14  42  42  42
+-246 246 246 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 231 231 231 242 242 242
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 234 234 234  10  10  10
+-  2   2   6   2   2   6  22  22  22  14  14  14
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6  66  66  66  62  62  62  22  22  22
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   6   6   6  18  18  18
+- 50  50  50  74  74  74   2   2   6   2   2   6
+- 14  14  14  70  70  70  34  34  34  62  62  62
+-250 250 250 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 231 231 231 246 246 246
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 234 234 234  14  14  14
+-  2   2   6   2   2   6  30  30  30   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6  66  66  66  62  62  62  22  22  22
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   6   6   6  18  18  18
+- 54  54  54  62  62  62   2   2   6   2   2   6
+-  2   2   6  30  30  30  46  46  46  70  70  70
+-250 250 250 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 231 231 231 246 246 246
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 226 226 226  10  10  10
+-  2   2   6   6   6   6  30  30  30   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6  66  66  66  58  58  58  22  22  22
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   6   6   6  22  22  22
+- 58  58  58  62  62  62   2   2   6   2   2   6
+-  2   2   6   2   2   6  30  30  30  78  78  78
+-250 250 250 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 231 231 231 246 246 246
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 206 206 206   2   2   6
+- 22  22  22  34  34  34  18  14   6  22  22  22
+- 26  26  26  18  18  18   6   6   6   2   2   6
+-  2   2   6  82  82  82  54  54  54  18  18  18
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   6   6   6  26  26  26
+- 62  62  62 106 106 106  74  54  14 185 133  11
+-210 162  10 121  92   8   6   6   6  62  62  62
+-238 238 238 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 231 231 231 246 246 246
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 158 158 158  18  18  18
+- 14  14  14   2   2   6   2   2   6   2   2   6
+-  6   6   6  18  18  18  66  66  66  38  38  38
+-  6   6   6  94  94  94  50  50  50  18  18  18
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   6   6   6
+- 10  10  10  10  10  10  18  18  18  38  38  38
+- 78  78  78 142 134 106 216 158  10 242 186  14
+-246 190  14 246 190  14 156 118  10  10  10  10
+- 90  90  90 238 238 238 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 231 231 231 250 250 250
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 246 230 190
+-238 204  91 238 204  91 181 142  44  37  26   9
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6  38  38  38  46  46  46
+- 26  26  26 106 106 106  54  54  54  18  18  18
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   6   6   6  14  14  14  22  22  22
+- 30  30  30  38  38  38  50  50  50  70  70  70
+-106 106 106 190 142  34 226 170  11 242 186  14
+-246 190  14 246 190  14 246 190  14 154 114  10
+-  6   6   6  74  74  74 226 226 226 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 231 231 231 250 250 250
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 228 184  62
+-241 196  14 241 208  19 232 195  16  38  30  10
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   6   6   6  30  30  30  26  26  26
+-203 166  17 154 142  90  66  66  66  26  26  26
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  6   6   6  18  18  18  38  38  38  58  58  58
+- 78  78  78  86  86  86 101 101 101 123 123 123
+-175 146  61 210 150  10 234 174  13 246 186  14
+-246 190  14 246 190  14 246 190  14 238 190  10
+-102  78  10   2   2   6  46  46  46 198 198 198
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 234 234 234 242 242 242
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 224 178  62
+-242 186  14 241 196  14 210 166  10  22  18   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   6   6   6 121  92   8
+-238 202  15 232 195  16  82  82  82  34  34  34
+- 10  10  10   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+- 14  14  14  38  38  38  70  70  70 154 122  46
+-190 142  34 200 144  11 197 138  11 197 138  11
+-213 154  11 226 170  11 242 186  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-225 175  15  46  32   6   2   2   6  22  22  22
+-158 158 158 250 250 250 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 250 250 250 242 242 242 224 178  62
+-239 182  13 236 186  11 213 154  11  46  32   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6  61  42   6 225 175  15
+-238 190  10 236 186  11 112 100  78  42  42  42
+- 14  14  14   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   6   6   6
+- 22  22  22  54  54  54 154 122  46 213 154  11
+-226 170  11 230 174  11 226 170  11 226 170  11
+-236 178  12 242 186  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-241 196  14 184 144  12  10  10  10   2   2   6
+-  6   6   6 116 116 116 242 242 242 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 231 231 231 198 198 198 214 170  54
+-236 178  12 236 178  12 210 150  10 137  92   6
+- 18  14   6   2   2   6   2   2   6   2   2   6
+-  6   6   6  70  47   6 200 144  11 236 178  12
+-239 182  13 239 182  13 124 112  88  58  58  58
+- 22  22  22   6   6   6   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 30  30  30  70  70  70 180 133  36 226 170  11
+-239 182  13 242 186  14 242 186  14 246 186  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 232 195  16  98  70   6   2   2   6
+-  2   2   6   2   2   6  66  66  66 221 221 221
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 206 206 206 198 198 198 214 166  58
+-230 174  11 230 174  11 216 158  10 192 133   9
+-163 110   8 116  81   8 102  78  10 116  81   8
+-167 114   7 197 138  11 226 170  11 239 182  13
+-242 186  14 242 186  14 162 146  94  78  78  78
+- 34  34  34  14  14  14   6   6   6   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   6   6   6
+- 30  30  30  78  78  78 190 142  34 226 170  11
+-239 182  13 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 241 196  14 203 166  17  22  18   6
+-  2   2   6   2   2   6   2   2   6  38  38  38
+-218 218 218 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-250 250 250 206 206 206 198 198 198 202 162  69
+-226 170  11 236 178  12 224 166  10 210 150  10
+-200 144  11 197 138  11 192 133   9 197 138  11
+-210 150  10 226 170  11 242 186  14 246 190  14
+-246 190  14 246 186  14 225 175  15 124 112  88
+- 62  62  62  30  30  30  14  14  14   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 30  30  30  78  78  78 174 135  50 224 166  10
+-239 182  13 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 241 196  14 139 102  15
+-  2   2   6   2   2   6   2   2   6   2   2   6
+- 78  78  78 250 250 250 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-250 250 250 214 214 214 198 198 198 190 150  46
+-219 162  10 236 178  12 234 174  13 224 166  10
+-216 158  10 213 154  11 213 154  11 216 158  10
+-226 170  11 239 182  13 246 190  14 246 190  14
+-246 190  14 246 190  14 242 186  14 206 162  42
+-101 101 101  58  58  58  30  30  30  14  14  14
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 30  30  30  74  74  74 174 135  50 216 158  10
+-236 178  12 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 241 196  14 226 184  13
+- 61  42   6   2   2   6   2   2   6   2   2   6
+- 22  22  22 238 238 238 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 226 226 226 187 187 187 180 133  36
+-216 158  10 236 178  12 239 182  13 236 178  12
+-230 174  11 226 170  11 226 170  11 230 174  11
+-236 178  12 242 186  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 186  14 239 182  13
+-206 162  42 106 106 106  66  66  66  34  34  34
+- 14  14  14   6   6   6   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   6   6   6
+- 26  26  26  70  70  70 163 133  67 213 154  11
+-236 178  12 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 241 196  14
+-190 146  13  18  14   6   2   2   6   2   2   6
+- 46  46  46 246 246 246 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 221 221 221  86  86  86 156 107  11
+-216 158  10 236 178  12 242 186  14 246 186  14
+-242 186  14 239 182  13 239 182  13 242 186  14
+-242 186  14 246 186  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-242 186  14 225 175  15 142 122  72  66  66  66
+- 30  30  30  10  10  10   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   6   6   6
+- 26  26  26  70  70  70 163 133  67 210 150  10
+-236 178  12 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-232 195  16 121  92   8  34  34  34 106 106 106
+-221 221 221 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-242 242 242  82  82  82  18  14   6 163 110   8
+-216 158  10 236 178  12 242 186  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 242 186  14 163 133  67
+- 46  46  46  18  18  18   6   6   6   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  10  10  10
+- 30  30  30  78  78  78 163 133  67 210 150  10
+-236 178  12 246 186  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-241 196  14 215 174  15 190 178 144 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 218 218 218
+- 58  58  58   2   2   6  22  18   6 167 114   7
+-216 158  10 236 178  12 246 186  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 186  14 242 186  14 190 150  46
+- 54  54  54  22  22  22   6   6   6   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  14  14  14
+- 38  38  38  86  86  86 180 133  36 213 154  11
+-236 178  12 246 186  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 232 195  16 190 146  13 214 214 214
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 250 250 250 170 170 170  26  26  26
+-  2   2   6   2   2   6  37  26   9 163 110   8
+-219 162  10 239 182  13 246 186  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 186  14 236 178  12 224 166  10 142 122  72
+- 46  46  46  18  18  18   6   6   6   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   6   6   6  18  18  18
+- 50  50  50 109 106  95 192 133   9 224 166  10
+-242 186  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-242 186  14 226 184  13 210 162  10 142 110  46
+-226 226 226 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-253 253 253 253 253 253 253 253 253 253 253 253
+-198 198 198  66  66  66   2   2   6   2   2   6
+-  2   2   6   2   2   6  50  34   6 156 107  11
+-219 162  10 239 182  13 246 186  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 242 186  14
+-234 174  13 213 154  11 154 122  46  66  66  66
+- 30  30  30  10  10  10   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   6   6   6  22  22  22
+- 58  58  58 154 121  60 206 145  10 234 174  13
+-242 186  14 246 186  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 186  14 236 178  12 210 162  10 163 110   8
+- 61  42   6 138 138 138 218 218 218 250 250 250
+-253 253 253 253 253 253 253 253 253 250 250 250
+-242 242 242 210 210 210 144 144 144  66  66  66
+-  6   6   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6  61  42   6 163 110   8
+-216 158  10 236 178  12 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 239 182  13 230 174  11 216 158  10
+-190 142  34 124 112  88  70  70  70  38  38  38
+- 18  18  18   6   6   6   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   6   6   6  22  22  22
+- 62  62  62 168 124  44 206 145  10 224 166  10
+-236 178  12 239 182  13 242 186  14 242 186  14
+-246 186  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 236 178  12 216 158  10 175 118   6
+- 80  54   7   2   2   6   6   6   6  30  30  30
+- 54  54  54  62  62  62  50  50  50  38  38  38
+- 14  14  14   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   6   6   6  80  54   7 167 114   7
+-213 154  11 236 178  12 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 190  14 242 186  14 239 182  13 239 182  13
+-230 174  11 210 150  10 174 135  50 124 112  88
+- 82  82  82  54  54  54  34  34  34  18  18  18
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   6   6   6  18  18  18
+- 50  50  50 158 118  36 192 133   9 200 144  11
+-216 158  10 219 162  10 224 166  10 226 170  11
+-230 174  11 236 178  12 239 182  13 239 182  13
+-242 186  14 246 186  14 246 190  14 246 190  14
+-246 190  14 246 190  14 246 190  14 246 190  14
+-246 186  14 230 174  11 210 150  10 163 110   8
+-104  69   6  10  10  10   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   6   6   6  91  60   6 167 114   7
+-206 145  10 230 174  11 242 186  14 246 190  14
+-246 190  14 246 190  14 246 186  14 242 186  14
+-239 182  13 230 174  11 224 166  10 213 154  11
+-180 133  36 124 112  88  86  86  86  58  58  58
+- 38  38  38  22  22  22  10  10  10   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0  14  14  14
+- 34  34  34  70  70  70 138 110  50 158 118  36
+-167 114   7 180 123   7 192 133   9 197 138  11
+-200 144  11 206 145  10 213 154  11 219 162  10
+-224 166  10 230 174  11 239 182  13 242 186  14
+-246 186  14 246 186  14 246 186  14 246 186  14
+-239 182  13 216 158  10 185 133  11 152  99   6
+-104  69   6  18  14   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   2   2   6   2   2   6   2   2   6
+-  2   2   6   6   6   6  80  54   7 152  99   6
+-192 133   9 219 162  10 236 178  12 239 182  13
+-246 186  14 242 186  14 239 182  13 236 178  12
+-224 166  10 206 145  10 192 133   9 154 121  60
+- 94  94  94  62  62  62  42  42  42  22  22  22
+- 14  14  14   6   6   6   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   6   6   6
+- 18  18  18  34  34  34  58  58  58  78  78  78
+-101  98  89 124 112  88 142 110  46 156 107  11
+-163 110   8 167 114   7 175 118   6 180 123   7
+-185 133  11 197 138  11 210 150  10 219 162  10
+-226 170  11 236 178  12 236 178  12 234 174  13
+-219 162  10 197 138  11 163 110   8 130  83   6
+- 91  60   6  10  10  10   2   2   6   2   2   6
+- 18  18  18  38  38  38  38  38  38  38  38  38
+- 38  38  38  38  38  38  38  38  38  38  38  38
+- 38  38  38  38  38  38  26  26  26   2   2   6
+-  2   2   6   6   6   6  70  47   6 137  92   6
+-175 118   6 200 144  11 219 162  10 230 174  11
+-234 174  13 230 174  11 219 162  10 210 150  10
+-192 133   9 163 110   8 124 112  88  82  82  82
+- 50  50  50  30  30  30  14  14  14   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  6   6   6  14  14  14  22  22  22  34  34  34
+- 42  42  42  58  58  58  74  74  74  86  86  86
+-101  98  89 122 102  70 130  98  46 121  87  25
+-137  92   6 152  99   6 163 110   8 180 123   7
+-185 133  11 197 138  11 206 145  10 200 144  11
+-180 123   7 156 107  11 130  83   6 104  69   6
+- 50  34   6  54  54  54 110 110 110 101  98  89
+- 86  86  86  82  82  82  78  78  78  78  78  78
+- 78  78  78  78  78  78  78  78  78  78  78  78
+- 78  78  78  82  82  82  86  86  86  94  94  94
+-106 106 106 101 101 101  86  66  34 124  80   6
+-156 107  11 180 123   7 192 133   9 200 144  11
+-206 145  10 200 144  11 192 133   9 175 118   6
+-139 102  15 109 106  95  70  70  70  42  42  42
+- 22  22  22  10  10  10   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   6   6   6  10  10  10
+- 14  14  14  22  22  22  30  30  30  38  38  38
+- 50  50  50  62  62  62  74  74  74  90  90  90
+-101  98  89 112 100  78 121  87  25 124  80   6
+-137  92   6 152  99   6 152  99   6 152  99   6
+-138  86   6 124  80   6  98  70   6  86  66  30
+-101  98  89  82  82  82  58  58  58  46  46  46
+- 38  38  38  34  34  34  34  34  34  34  34  34
+- 34  34  34  34  34  34  34  34  34  34  34  34
+- 34  34  34  34  34  34  38  38  38  42  42  42
+- 54  54  54  82  82  82  94  86  76  91  60   6
+-134  86   6 156 107  11 167 114   7 175 118   6
+-175 118   6 167 114   7 152  99   6 121  87  25
+-101  98  89  62  62  62  34  34  34  18  18  18
+-  6   6   6   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   6   6   6   6   6   6  10  10  10
+- 18  18  18  22  22  22  30  30  30  42  42  42
+- 50  50  50  66  66  66  86  86  86 101  98  89
+-106  86  58  98  70   6 104  69   6 104  69   6
+-104  69   6  91  60   6  82  62  34  90  90  90
+- 62  62  62  38  38  38  22  22  22  14  14  14
+- 10  10  10  10  10  10  10  10  10  10  10  10
+- 10  10  10  10  10  10   6   6   6  10  10  10
+- 10  10  10  10  10  10  10  10  10  14  14  14
+- 22  22  22  42  42  42  70  70  70  89  81  66
+- 80  54   7 104  69   6 124  80   6 137  92   6
+-134  86   6 116  81   8 100  82  52  86  86  86
+- 58  58  58  30  30  30  14  14  14   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   6   6   6  10  10  10  14  14  14
+- 18  18  18  26  26  26  38  38  38  54  54  54
+- 70  70  70  86  86  86  94  86  76  89  81  66
+- 89  81  66  86  86  86  74  74  74  50  50  50
+- 30  30  30  14  14  14   6   6   6   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  6   6   6  18  18  18  34  34  34  58  58  58
+- 82  82  82  89  81  66  89  81  66  89  81  66
+- 94  86  66  94  86  76  74  74  74  50  50  50
+- 26  26  26  14  14  14   6   6   6   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  6   6   6   6   6   6  14  14  14  18  18  18
+- 30  30  30  38  38  38  46  46  46  54  54  54
+- 50  50  50  42  42  42  30  30  30  18  18  18
+- 10  10  10   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   6   6   6  14  14  14  26  26  26
+- 38  38  38  50  50  50  58  58  58  58  58  58
+- 54  54  54  42  42  42  30  30  30  18  18  18
+- 10  10  10   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   6   6   6
+-  6   6   6  10  10  10  14  14  14  18  18  18
+- 18  18  18  14  14  14  10  10  10   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   6   6   6
+- 14  14  14  18  18  18  22  22  22  22  22  22
+- 18  18  18  14  14  14  10  10  10   6   6   6
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
+-  0   0   0   0   0   0   0   0   0   0   0   0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 1 0  0 0 0  0 0 0  1 1 0
++0 1 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  1 1 0  0 0 0  0 0 0
++0 1 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  1 1 0
++10 15 3  2 3 1  12 18 4  42 61 14  19 27 6  11 16 4
++38 55 13  10 15 3  3 4 1  10 15 3  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  2 3 1
++12 18 4  1 1 0  23 34 8  31 45 11  10 15 3  32 47 11
++34 49 12  3 4 1  3 4 1  3 4 1  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  10 15 3  29 42 10  26 37 9  12 18 4
++55 80 19  81 118 28  55 80 19  92 132 31  106 153 36  69 100 23
++100 144 34  80 116 27  42 61 14  81 118 28  23 34 8  27 40 9
++15 21 5  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  1 1 0  29 42 10  15 21 5  50 72 17
++74 107 25  45 64 15  102 148 35  80 116 27  84 121 28  111 160 38
++69 100 23  65 94 22  81 118 28  29 42 10  17 25 6  29 42 10
++23 34 8  2 3 1  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  3 4 1
++15 21 5  15 21 5  34 49 12  101 146 34  111 161 38  97 141 33
++97 141 33  119 172 41  117 170 40  116 167 40  118 170 40  118 171 40
++117 169 40  118 170 40  111 160 38  118 170 40  96 138 32  89 128 30
++81 118 28  11 16 4  10 15 3  1 1 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++3 4 1  3 4 1  34 49 12  101 146 34  79 115 27  111 160 38
++114 165 39  113 163 39  118 170 40  117 169 40  118 171 40  117 169 40
++116 167 40  119 172 41  113 163 39  92 132 31  105 151 36  113 163 39
++75 109 26  19 27 6  16 23 5  11 16 4  0 1 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  10 15 3
++80 116 27  106 153 36  105 151 36  114 165 39  118 170 40  118 171 40
++118 171 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 170 40  117 169 40  118 170 40  118 170 40
++117 170 40  75 109 26  75 109 26  34 49 12  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  3 4 1
++64 92 22  65 94 22  100 144 34  118 171 40  118 170 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  118 171 41  118 170 40  117 169 40
++109 158 37  105 151 36  104 150 35  47 69 16  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++42 61 14  115 167 39  118 170 40  117 169 40  117 169 40  117 169 40
++117 170 40  117 170 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  118 170 40  96 138 32  17 25 6  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  47 69 16
++114 165 39  117 168 40  117 170 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  118 170 40  117 169 40  117 169 40  117 169 40
++117 170 40  119 172 41  96 138 32  12 18 4  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  10 15 3
++32 47 11  105 151 36  118 170 40  117 169 40  117 169 40  116 168 40
++109 157 37  111 160 38  117 169 40  118 171 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  118 171 40  69 100 23  2 3 1
++0 0 0  0 0 0  0 0 0  0 0 0  19 27 6  101 146 34
++118 171 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 170 40
++118 171 40  115 166 39  107 154 36  111 161 38  117 169 40  117 169 40
++117 169 40  118 171 40  75 109 26  19 27 6  2 3 1  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  16 23 5
++89 128 30  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++111 160 38  92 132 31  79 115 27  96 138 32  115 166 39  119 171 41
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  118 170 40  109 157 37  26 37 9
++0 0 0  0 0 0  0 0 0  0 0 0  64 92 22  118 171 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  118 170 40  118 171 40  109 157 37
++89 128 30  81 118 28  100 144 34  115 166 39  117 169 40  117 169 40
++117 169 40  117 170 40  113 163 39  60 86 20  1 1 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++27 40 9  96 138 32  118 170 40  117 169 40  117 169 40  117 169 40
++117 170 40  117 169 40  101 146 34  67 96 23  55 80 19  84 121 28
++113 163 39  119 171 41  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  119 171 41  65 94 22
++0 0 0  0 0 0  0 0 0  15 21 5  101 146 34  118 171 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  118 170 40  118 171 40  104 150 35  69 100 23  53 76 18
++81 118 28  111 160 38  118 170 40  117 169 40  117 169 40  117 169 40
++117 169 40  114 165 39  69 100 23  10 15 3  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  1 1 0
++31 45 11  77 111 26  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  118 170 40  116 168 40  92 132 31  47 69 16
++38 55 13  81 118 28  113 163 39  119 171 41  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  118 171 41  92 132 31
++10 15 3  0 0 0  0 0 0  36 52 12  115 166 39  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  118 170 40
++118 171 40  102 148 35  64 92 22  34 49 12  65 94 22  106 153 36
++118 171 40  117 170 40  117 169 40  117 169 40  117 169 40  117 169 40
++118 170 40  107 154 36  55 80 19  15 21 5  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++29 42 10  101 146 34  118 171 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  118 171 40  113 163 39
++75 109 26  27 40 9  36 52 12  89 128 30  116 167 40  118 171 40
++117 169 40  117 169 40  117 169 40  117 169 40  118 170 40  104 150 35
++16 23 5  0 0 0  0 0 0  53 76 18  118 171 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  119 171 41  109 157 37
++67 96 23  23 34 8  42 61 14  96 138 32  118 170 40  118 170 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  74 107 25  10 15 3  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  31 45 11  101 146 34  118 170 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++119 171 41  102 148 35  47 69 16  14 20 5  50 72 17  102 148 35
++118 171 40  117 169 40  117 169 40  117 169 40  118 170 40  102 148 35
++15 21 5  0 0 0  0 0 0  50 72 17  118 170 40  117 169 40
++117 169 40  117 169 40  118 170 40  116 167 40  84 121 28  27 40 9
++19 27 6  74 107 25  114 165 39  118 171 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  75 109 26  10 15 4  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  38 55 13  102 148 35  118 171 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  118 170 40  115 167 39  77 111 26  17 25 6  19 27 6
++77 111 26  115 166 39  118 170 40  117 169 40  119 172 41  81 118 28
++3 4 1  0 0 0  0 0 0  27 40 9  111 160 38  118 170 40
++117 169 40  118 171 40  105 151 36  50 72 17  10 15 3  38 55 13
++100 144 34  118 171 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  79 115 27  15 21 5  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  10 15 3  64 92 22  111 160 38  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  118 171 40  96 138 32  32 47 11
++3 4 1  50 72 17  107 154 36  120 173 41  105 151 36  31 45 11
++0 0 0  0 0 0  0 0 0  3 4 1  65 94 22  117 169 40
++118 170 40  89 128 30  26 37 9  3 4 1  60 86 20  111 161 38
++118 171 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++97 141 33  36 52 12  1 1 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  14 20 5  75 109 26  117 168 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  118 171 40  107 154 36
++45 64 15  2 3 1  31 45 11  75 109 26  32 47 11  0 1 0
++0 0 0  0 0 0  0 0 0  0 0 0  10 15 3  55 80 19
++65 94 22  11 16 4  11 16 4  75 109 26  116 168 40  118 170 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  118 170 40  107 154 36
++47 69 16  3 4 1  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  12 18 4  69 100 23  111 161 38  118 171 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  118 170 40
++111 160 38  50 72 17  2 3 1  2 3 1  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  1 1 0
++1 1 0  12 18 4  81 118 28  118 170 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 170 40  118 171 40  101 146 34
++42 61 14  2 3 1  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  3 4 1  36 52 12  89 128 30
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++118 171 41  101 146 34  14 20 5  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  47 69 16  118 170 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 170 40  111 160 38  69 100 23  19 27 6
++0 1 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  11 16 4  69 100 23
++115 167 39  119 172 41  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++119 172 41  75 109 26  3 4 1  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  23 34 8  106 153 36  118 170 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++117 169 40  118 170 40  119 172 41  105 151 36  42 61 14  2 3 1
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  1 1 0  15 21 5
++45 64 15  80 116 27  114 165 39  118 170 40  117 169 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  119 172 41
++97 141 33  20 30 7  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  1 1 0  53 76 18  114 165 39  118 171 40  117 169 40
++117 169 40  117 169 40  117 169 40  117 169 40  117 169 40  117 169 40
++118 171 40  104 150 35  64 92 22  31 45 11  10 15 3  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  36 52 12  97 141 33  109 158 37  113 163 39  116 168 40
++117 169 40  117 170 40  118 170 40  119 172 41  115 167 39  84 121 28
++23 34 8  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  3 4 1  50 72 17  102 148 35  118 171 40
++119 171 41  118 170 40  117 169 40  117 169 40  115 166 39  111 161 38
++109 157 37  79 115 27  12 18 4  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  3 4 1  15 21 5  23 34 8  45 64 15  106 153 36
++116 167 40  111 160 38  101 146 34  79 115 27  42 61 14  10 15 3
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  1 1 0  20 30 7  60 86 20
++89 128 30  106 153 36  113 163 39  117 169 40  84 121 28  29 42 10
++19 27 6  10 15 3  2 3 1  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  16 23 5  38 55 13
++36 52 12  26 37 9  12 18 4  2 3 1  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  1 0 0  19 2 7  52 5 18
++78 7 27  88 8 31  81 7 29  56 5 19  25 2 9  3 0 1
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++3 4 1  19 27 6  31 45 11  38 55 13  32 47 11  3 4 1
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  3 0 1
++9 0 3  12 1 4  9 0 3  4 0 1  0 0 0  0 0 0
++0 0 0  0 0 0  28 3 10  99 9 35  156 14 55  182 16 64
++189 17 66  190 17 67  189 17 66  184 17 65  166 15 58  118 13 41
++45 4 16  3 0 1  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  11 1 4  52 5 18  101 9 35  134 12 47
++151 14 53  154 14 54  151 14 53  113 10 40  11 1 4  0 0 0
++3 0 1  67 6 24  159 14 56  190 17 67  190 17 67  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  190 17 67  191 17 67
++174 16 61  101 9 35  14 1 5  0 0 0  35 3 12  108 10 38
++122 11 43  122 11 43  112 10 39  87 8 30  50 5 17  13 1 5
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++3 0 1  56 5 19  141 13 49  182 16 64  191 17 67  191 17 67
++190 17 67  190 17 67  191 17 67  113 10 40  3 0 1  1 0 0
++79 7 28  180 16 63  190 17 67  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++189 17 66  188 17 66  122 11 43  11 1 4  41 4 14  176 16 62
++191 17 67  191 17 67  191 17 67  190 17 67  181 16 63  146 13 51
++75 7 26  10 1 4  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  7 1 2
++90 8 32  178 16 62  191 17 67  188 17 66  188 17 66  188 17 66
++188 17 66  190 17 67  141 13 49  22 2 8  0 0 0  41 4 14
++173 16 61  190 17 67  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  88 8 31  1 0 0  89 8 31
++185 17 65  189 17 66  188 17 66  188 17 66  189 17 66  191 17 67
++186 17 65  124 11 43  25 2 9  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  2 0 1  89 8 31
++184 17 65  189 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++190 17 67  151 14 53  34 3 12  0 0 0  0 0 0  79 7 28
++190 17 67  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  191 17 67  146 13 51  9 1 3  7 1 2
++108 10 38  187 17 66  189 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  190 17 67  141 13 49  22 2 8  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  52 5 18  176 16 62
++189 17 66  188 17 66  188 17 66  188 17 66  188 17 66  190 17 67
++151 14 53  38 3 13  0 0 0  0 0 0  0 0 0  50 5 17
++180 16 63  189 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  191 17 67  141 13 49  7 1 3  0 0 0
++11 1 4  112 10 39  187 17 66  189 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  190 17 67  113 10 40  5 0 2  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  7 1 3  132 12 46  191 17 67
++188 17 66  188 17 66  188 17 66  188 17 66  190 17 67  146 13 51
++35 3 12  0 0 0  0 0 0  0 0 0  0 0 0  5 0 2
++101 9 35  185 17 65  190 17 67  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  190 17 67  180 16 63  67 6 24  0 0 0  0 0 0
++0 0 0  11 1 4  108 10 38  186 17 65  189 17 66  188 17 66
++188 17 66  188 17 66  189 17 66  180 16 63  56 5 19  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  44 4 15  177 16 62  189 17 66
++188 17 66  188 17 66  189 17 66  189 17 66  134 12 47  28 3 10
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++8 1 3  79 7 28  159 14 56  188 17 66  191 17 67  190 17 67
++189 17 66  189 17 66  189 17 66  189 17 66  190 17 67  191 17 67
++188 17 66  158 14 55  72 7 25  4 0 1  0 0 0  0 0 0
++0 0 0  0 0 0  8 1 3  95 9 33  182 16 64  189 17 67
++188 17 66  188 17 66  188 17 66  191 17 67  122 11 43  3 0 1
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  88 8 31  190 17 67  188 17 66
++188 17 66  189 17 66  185 17 65  113 10 40  18 2 6  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  1 0 0  24 2 8  77 7 27  124 11 43  154 14 54
++168 15 59  173 16 61  173 16 61  168 15 59  154 14 54  124 11 43
++77 7 27  22 2 8  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  5 0 2  77 7 27  173 16 61
++190 17 67  188 17 66  188 17 66  190 17 67  164 15 57  23 2 8
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  1 0 0  118 13 41  191 17 67  188 17 66
++190 17 67  174 16 61  87 8 30  8 1 3  0 0 0  0 0 0
++0 0 0  0 0 0  10 1 4  29 3 10  40 4 14  36 3 13
++18 2 6  2 0 1  0 0 0  0 0 0  3 0 1  14 1 5
++26 2 9  33 3 11  32 3 11  25 2 9  13 1 5  3 0 1
++0 0 0  14 1 5  56 5 19  95 9 33  109 10 38  101 9 35
++77 7 27  35 3 12  5 0 2  0 0 0  1 0 0  56 5 19
++156 14 55  190 17 67  188 17 66  188 17 66  182 16 64  50 5 17
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  5 0 2  134 12 47  191 17 67  189 17 66
++151 14 53  52 5 18  2 0 1  0 0 0  0 0 0  1 0 0
++28 3 10  90 8 32  146 13 51  170 15 60  178 16 62  174 16 61
++158 14 55  112 10 39  40 4 14  1 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  3 0 1
++56 5 19  146 13 51  183 17 64  191 17 67  191 17 67  191 17 67
++188 17 66  173 16 61  122 11 43  41 4 14  1 0 0  0 0 0
++30 3 10  124 11 43  185 17 65  190 17 67  187 17 66  67 6 24
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  6 1 2  134 12 47  168 15 59  99 9 35
++21 2 7  0 0 0  0 0 0  0 0 0  6 1 2  77 7 27
++162 15 57  190 17 67  191 17 67  189 17 66  189 17 66  189 17 66
++190 17 67  191 17 67  169 15 59  75 7 26  3 0 1  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  2 0 1  79 7 28
++178 16 62  191 17 67  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  189 17 66  191 17 67  170 15 60  79 7 28  5 0 2
++0 0 0  10 1 3  78 7 27  159 14 56  188 17 66  75 7 26
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  1 0 0  35 3 12  29 3 10  2 0 1
++0 0 0  0 0 0  0 0 0  9 1 3  101 9 35  183 17 64
++190 17 67  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  190 17 67  178 16 63  67 6 23  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  52 5 18  174 16 61
++190 17 67  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  190 17 67  182 16 64  89 8 31
++4 0 1  0 0 0  0 0 0  25 2 9  73 7 26  31 3 11
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  4 0 1  98 9 34  187 17 66  189 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  190 17 67  158 14 55  25 2 9
++0 0 0  0 0 0  0 0 0  8 1 3  134 12 47  191 17 67
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  189 17 66  180 16 63
++68 6 24  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  6 1 2  19 2 7  3 0 1  0 0 0  0 0 0
++0 0 0  0 0 0  65 6 23  180 16 63  189 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  189 17 66  83 8 29
++0 0 0  0 0 0  0 0 0  41 4 14  177 16 62  189 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  190 17 67
++159 14 56  28 3 10  0 0 0  0 0 0  0 0 0  23 2 8
++41 4 14  5 0 2  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++23 2 8  113 10 40  159 14 56  65 6 23  0 0 0  0 0 0
++0 0 0  16 1 6  146 13 51  191 17 67  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  191 17 67  132 12 46
++5 0 2  0 0 0  0 0 0  77 7 27  189 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++190 17 67  98 9 34  0 0 0  0 0 0  12 1 4  134 12 47
++178 16 63  108 10 38  16 1 6  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  30 3 10
++141 13 49  190 17 67  191 17 67  134 12 47  6 1 2  0 0 0
++0 0 0  68 6 24  186 17 65  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  190 17 67  156 14 55
++14 1 5  0 0 0  0 0 0  98 9 34  191 17 67  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++190 17 67  156 14 55  19 2 7  0 0 0  47 4 16  181 16 63
++190 17 67  189 17 66  126 14 44  17 2 6  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  16 1 6  134 12 47
++191 17 67  188 17 66  190 17 67  162 15 57  19 2 7  0 0 0
++3 0 1  123 11 43  191 17 67  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  190 17 67  163 15 57
++20 2 7  0 0 0  0 0 0  101 9 35  191 17 67  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  182 16 64  52 5 18  0 0 0  73 7 26  188 17 66
++188 17 66  188 17 66  189 17 66  109 10 38  5 0 2  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  95 9 33  189 17 66
++188 17 66  188 17 66  189 17 66  171 15 60  29 3 10  0 0 0
++16 1 6  156 14 55  190 17 67  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  190 17 67  158 14 55
++17 2 6  0 0 0  0 0 0  85 8 30  190 17 67  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  189 17 66  81 7 29  0 0 0  85 8 30  190 17 67
++188 17 66  188 17 66  189 17 66  180 16 63  56 5 19  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  25 2 9  162 15 57  190 17 67
++188 17 66  188 17 66  189 17 66  173 16 61  31 3 11  0 0 0
++30 3 10  171 15 60  189 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  191 17 67  141 13 49
++7 1 2  0 0 0  0 0 0  56 5 19  183 17 64  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  191 17 67  98 9 34  0 0 0  88 8 31  190 17 67
++188 17 66  188 17 66  188 17 66  191 17 67  124 11 43  5 0 2
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  68 6 24  187 17 66  188 17 66
++188 17 66  188 17 66  189 17 66  170 15 60  28 3 10  0 0 0
++34 3 12  174 16 61  189 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  191 17 67  101 9 35
++0 0 0  0 0 0  0 0 0  21 2 7  159 14 56  190 17 67
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  191 17 67  98 9 34  0 0 0  81 7 29  189 17 66
++188 17 66  188 17 66  188 17 66  189 17 66  168 15 59  28 3 10
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  109 10 38  191 17 67  188 17 66
++188 17 66  188 17 66  190 17 67  163 15 57  21 2 7  0 0 0
++26 2 9  168 15 59  189 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  189 17 66  180 16 63  47 4 16
++0 0 0  0 0 0  0 0 0  0 0 0  108 10 38  190 17 67
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  189 17 66  78 7 27  0 0 0  68 6 24  187 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  183 17 64  56 5 19
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  3 0 1  131 12 46  191 17 67  188 17 66
++188 17 66  188 17 66  190 17 67  151 14 53  12 1 4  0 0 0
++11 1 4  146 13 51  190 17 67  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  191 17 67  126 14 44  7 1 2
++0 0 0  0 0 0  0 0 0  0 0 0  32 3 11  164 15 58
++190 17 67  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++189 17 66  178 16 62  44 4 15  0 0 0  50 5 17  182 16 64
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  72 7 25
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  5 0 2  134 12 47  191 17 67  188 17 66
++188 17 66  188 17 66  191 17 67  131 12 46  3 0 1  0 0 0
++0 0 0  101 9 35  190 17 67  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  190 17 67  170 15 60  44 4 15  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  77 7 27
++183 17 64  189 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++191 17 67  134 12 47  9 1 3  0 0 0  31 3 11  171 15 60
++189 17 66  188 17 66  188 17 66  188 17 66  188 17 66  72 7 25
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  2 0 1  124 11 43  191 17 67  188 17 66
++188 17 66  188 17 66  191 17 67  101 9 35  0 0 0  0 0 0
++0 0 0  35 3 12  168 15 59  190 17 67  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  189 17 66  182 16 64  77 7 27  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  6 1 2
++99 9 35  185 17 65  189 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  189 17 66
++177 16 62  56 5 19  0 0 0  0 0 0  13 1 5  151 14 53
++190 17 67  188 17 66  188 17 66  188 17 66  185 17 65  56 5 19
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  99 9 35  191 17 67  188 17 66
++188 17 66  188 17 66  186 17 65  65 6 23  0 0 0  0 0 0
++0 0 0  0 0 0  79 7 28  182 16 64  190 17 67  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++191 17 67  177 16 62  83 8 29  4 0 1  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++8 1 3  89 8 31  175 16 62  191 17 67  189 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  190 17 67  181 16 63
++85 8 30  3 0 1  0 0 0  0 0 0  1 0 0  118 13 41
++191 17 67  188 17 66  188 17 66  189 17 66  173 16 61  34 3 12
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  56 5 19  183 17 64  188 17 66
++188 17 66  189 17 66  169 15 59  30 3 10  0 0 0  0 0 0
++0 0 0  0 0 0  5 0 2  83 8 29  173 16 61  191 17 67
++190 17 67  189 17 66  189 17 66  190 17 67  191 17 67  187 17 66
++151 14 53  56 5 19  3 0 1  0 0 0  16 1 6  50 5 17
++79 7 28  95 9 33  95 9 33  75 7 26  41 4 14  10 1 4
++0 0 0  2 0 1  50 5 17  132 12 46  178 16 62  190 17 67
++191 17 67  191 17 67  191 17 67  186 17 65  154 14 54  68 6 24
++4 0 1  0 0 0  0 0 0  0 0 0  0 0 0  72 7 25
++187 17 66  188 17 66  188 17 66  191 17 67  141 13 49  9 1 3
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  14 1 5  151 14 53  190 17 67
++188 17 66  191 17 67  131 12 46  5 0 2  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  2 0 1  44 4 15  113 10 40
++156 14 55  173 16 61  174 16 61  164 15 58  134 12 47  77 7 27
++18 2 6  0 0 0  16 1 6  85 8 30  151 14 53  182 16 64
++189 17 66  191 17 67  190 17 67  188 17 66  177 16 62  141 13 49
++68 6 24  8 1 3  0 0 0  8 1 3  44 4 15  88 8 31
++113 10 40  122 11 43  108 10 38  67 6 24  20 2 7  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  28 3 10
++166 15 58  190 17 67  188 17 66  187 17 66  79 7 28  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  73 7 26  185 17 65
++189 17 66  184 17 65  65 6 23  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  2 0 1
++17 2 6  32 3 11  34 3 12  22 2 8  6 1 2  0 0 0
++0 0 0  38 3 13  141 13 49  188 17 66  190 17 67  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  189 17 66  191 17 67
++184 17 65  122 11 43  21 2 7  0 0 0  0 0 0  0 0 0
++0 0 0  1 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  1 0 0
++108 10 38  191 17 67  191 17 67  141 13 49  16 1 6  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  8 1 3  112 10 39
++186 17 65  124 11 43  10 1 4  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++36 3 13  156 14 55  191 17 67  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++189 17 66  190 17 67  134 12 47  18 2 6  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  7 1 2  41 4 14  75 7 26  66 5 23  19 2 7
++26 2 9  144 13 50  154 14 54  40 4 14  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  13 1 5
++56 5 19  19 2 7  0 0 0  7 1 2  29 3 10  35 3 12
++19 2 7  2 0 1  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  13 1 5
++134 12 47  191 17 67  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  189 17 67  108 10 38  3 0 1  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  1 0 0
++40 4 14  124 11 43  177 16 62  188 17 66  187 17 66  144 13 50
++24 2 8  17 2 6  22 2 8  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  19 2 7  122 11 43  171 15 60  175 16 62
++159 14 56  112 10 39  40 4 14  2 0 1  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  72 7 25
++186 17 65  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  189 17 66  174 16 61  41 4 14  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  3 0 1  72 7 25
++168 15 59  191 17 67  189 17 66  188 17 66  188 17 66  190 17 67
++95 9 33  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  95 9 33  191 17 67  189 17 66  189 17 66
++190 17 67  191 17 67  171 15 60  90 8 32  12 1 4  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  5 0 2  132 12 46
++191 17 67  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  190 17 67  98 9 34  0 0 0
++0 0 0  0 0 0  0 0 0  5 0 2  88 8 31  180 16 63
++190 17 67  188 17 66  188 17 66  188 17 66  188 17 66  191 17 67
++146 13 51  11 1 4  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  9 1 3  144 13 50  191 17 67  188 17 66  188 17 66
++188 17 66  188 17 66  189 17 66  187 17 66  123 11 43  20 2 7
++0 0 0  0 0 0  0 0 0  0 0 0  21 2 7  163 15 57
++190 17 67  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  191 17 67  134 12 47  5 0 2
++0 0 0  0 0 0  3 0 1  88 8 31  182 16 64  189 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  189 17 66
++171 15 60  31 3 11  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  20 2 7  162 15 57  190 17 67  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  190 17 67  132 12 46
++20 2 7  0 0 0  0 0 0  0 0 0  32 3 11  173 16 61
++189 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  190 17 67  151 14 53  12 1 4
++0 0 0  0 0 0  72 7 25  180 16 63  189 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++181 16 63  47 4 16  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  21 2 7  163 15 57  190 17 67  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  190 17 67
++122 11 43  9 1 3  0 0 0  0 0 0  30 3 10  171 15 60
++189 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  190 17 67  146 13 51  10 1 4
++0 0 0  38 3 13  166 15 58  190 17 67  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++183 17 64  52 5 18  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  13 1 5  154 14 54  190 17 67  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++186 17 65  79 7 28  0 0 0  0 0 0  14 1 5  156 14 54
++190 17 67  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  191 17 67  124 11 43  2 0 1
++5 0 2  122 11 43  191 17 67  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++182 16 64  47 4 16  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  3 0 1  126 14 44  191 17 67  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++190 17 67  158 14 55  23 2 8  0 0 0  1 0 0  113 10 40
++191 17 67  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  78 7 27  0 0 0
++47 4 16  177 16 62  189 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  189 17 66
++173 16 61  34 3 12  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  85 8 30  189 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  79 7 28  0 0 0  0 0 0  47 4 16
++175 16 62  189 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  190 17 67  156 14 55  22 2 8  0 0 0
++109 10 38  191 17 67  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  190 17 67
++151 14 53  13 1 5  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  35 3 12  173 16 61  189 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  191 17 67  134 12 47  7 1 2  0 0 0  3 0 1
++99 9 35  188 17 66  189 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  189 17 66  181 16 63  68 6 24  0 0 0  18 2 6
++156 14 55  190 17 67  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  190 17 67
++101 9 35  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  3 0 1  118 13 41  191 17 67  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  189 17 66  168 15 59  28 3 10  0 0 0  0 0 0
++12 1 4  113 10 40  187 17 66  189 17 67  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++190 17 67  180 16 63  88 8 31  4 0 1  0 0 0  47 4 16
++180 16 63  189 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  190 17 67  168 15 59
++36 3 13  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  38 3 13  164 15 58  190 17 67
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  182 16 64  50 5 17  0 0 0  0 0 0
++0 0 0  11 1 4  90 8 32  169 15 59  190 17 67  190 17 67
++189 17 66  189 17 66  189 17 66  189 17 66  191 17 67  189 17 66
++158 14 55  68 6 24  4 0 1  0 0 0  0 0 0  73 7 26
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  189 17 66  185 17 65  83 8 29
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  65 6 23  174 16 61
++190 17 67  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  185 17 65  56 5 19  0 0 0  0 0 0
++0 0 0  0 0 0  2 0 1  35 3 12  99 9 35  146 13 51
++170 15 60  177 16 62  177 16 62  166 15 58  141 13 49  85 8 30
++24 2 8  0 0 0  0 0 0  0 0 0  0 0 0  85 8 30
++190 17 67  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  189 17 66  112 10 39  8 1 3
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  1 0 0  68 6 24
++170 15 60  191 17 67  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  182 16 64  50 5 17  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  1 0 0  11 1 4
++28 3 10  40 4 14  38 3 13  25 2 9  8 1 3  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  78 7 27
++189 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  189 17 66  187 17 66  113 10 40  14 1 5  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  1 0 0
++47 4 16  141 13 49  186 17 65  191 17 67  190 17 67  189 17 66
++189 17 66  191 17 67  156 14 55  20 2 7  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  44 4 15
++178 16 62  190 17 67  188 17 66  188 17 66  188 17 66  190 17 67
++191 17 67  173 16 61  90 8 32  10 1 4  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  14 1 5  68 6 24  131 12 46  162 15 57  174 16 61
++171 15 60  146 13 51  56 5 19  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  3 0 1  14 1 5  29 3 10
++41 4 14  47 4 16  50 5 17  45 4 16  34 3 12  18 2 6
++5 0 2  0 0 0  0 0 0  0 0 0  0 0 0  5 0 2
++90 8 32  169 15 59  185 17 65  187 17 66  182 16 64  163 15 57
++113 10 40  41 4 14  2 0 1  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  5 0 2  21 2 7  34 3 12
++29 3 10  11 1 4  0 0 0  0 0 0  0 0 0  0 0 0
++3 0 1  32 3 11  79 7 28  124 11 43  154 14 54  171 15 60
++180 16 63  182 16 64  182 16 64  180 16 63  174 16 61  159 14 56
++132 12 46  88 8 31  34 3 12  3 0 1  0 0 0  0 0 0
++3 0 1  29 3 10  56 5 19  65 6 23  50 5 17  23 2 8
++3 0 1  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  25 2 9
++109 10 38  169 15 59  189 17 66  191 17 67  190 17 67  189 17 66
++189 17 66  188 17 66  188 17 66  188 17 66  189 17 66  190 17 67
++191 17 67  190 17 67  171 15 60  98 9 34  10 1 3  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  14 1 5  141 13 49
++191 17 67  189 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  189 17 67  186 17 65  65 6 23  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  23 2 8  166 15 58
++190 17 67  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  189 17 66  176 16 62  45 4 16  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  1 0 0  83 8 29
++183 17 64  189 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++188 17 66  189 17 66  185 17 65  95 9 33  3 0 1  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  5 0 2
++85 8 30  176 16 62  191 17 67  188 17 66  188 17 66  188 17 66
++188 17 66  188 17 66  188 17 66  188 17 66  188 17 66  188 17 66
++191 17 67  180 16 63  95 9 33  7 1 3  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++2 0 1  52 5 18  141 13 49  185 17 65  191 17 67  189 17 67
++189 17 66  188 17 66  188 17 66  189 17 66  191 17 67  187 17 66
++146 13 51  56 5 19  4 0 1  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  14 1 5  68 6 24  131 12 46  166 15 58
++180 16 63  183 17 64  180 16 63  168 15 59  134 12 47  75 7 26
++17 2 6  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  5 0 2  24 2 8
++44 4 15  52 5 18  45 4 16  26 2 9  6 1 2  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
++0 0 0  0 0 0  0 0 0
+diff -Nur linux-3.12.6/drivers/video/Makefile linux-raspberry-pi/drivers/video/Makefile
+--- linux-3.12.6/drivers/video/Makefile	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/video/Makefile	2013-12-29 10:41:47.000000000 +0100
+@@ -100,6 +100,7 @@
+ obj-$(CONFIG_FB_VOODOO1)          += sstfb.o
+ obj-$(CONFIG_FB_ARMCLCD)	  += amba-clcd.o
+ obj-$(CONFIG_FB_GOLDFISH)         += goldfishfb.o
++obj-$(CONFIG_FB_BCM2708)	  += bcm2708_fb.o
+ obj-$(CONFIG_FB_68328)            += 68328fb.o
+ obj-$(CONFIG_FB_GBE)              += gbefb.o
+ obj-$(CONFIG_FB_CIRRUS)		  += cirrusfb.o
+diff -Nur linux-3.12.6/drivers/w1/masters/w1-gpio.c linux-raspberry-pi/drivers/w1/masters/w1-gpio.c
+--- linux-3.12.6/drivers/w1/masters/w1-gpio.c	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/w1/masters/w1-gpio.c	2013-12-29 10:41:50.000000000 +0100
+@@ -22,6 +22,9 @@
+ #include "../w1.h"
+ #include "../w1_int.h"
+ 
++static int w1_gpio_pullup = 0;
++module_param_named(pullup, w1_gpio_pullup, int, 0);
++
+ static void w1_gpio_write_bit_dir(void *data, u8 bit)
+ {
+ 	struct w1_gpio_platform_data *pdata = data;
+@@ -46,6 +49,16 @@
+ 	return gpio_get_value(pdata->pin) ? 1 : 0;
+ }
+ 
++static void w1_gpio_bitbang_pullup(void *data, u8 on)
++{
++	struct w1_gpio_platform_data *pdata = data;
++
++	if (on)
++		gpio_direction_output(pdata->pin, 1);
++	else
++		gpio_direction_input(pdata->pin);
++}
++
+ #if defined(CONFIG_OF)
+ static struct of_device_id w1_gpio_dt_ids[] = {
+ 	{ .compatible = "w1-gpio" },
+@@ -127,6 +140,13 @@
+ 		master->write_bit = w1_gpio_write_bit_dir;
+ 	}
+ 
++	if (w1_gpio_pullup)
++		if (pdata->is_open_drain)
++			printk(KERN_ERR "w1-gpio 'pullup' option "
++			       "doesn't work with open drain GPIO\n");
++		else
++			master->bitbang_pullup = w1_gpio_bitbang_pullup;
++
+ 	err = w1_add_master_device(master);
+ 	if (err) {
+ 		dev_err(&pdev->dev, "w1_add_master device failed\n");
+diff -Nur linux-3.12.6/drivers/w1/w1.h linux-raspberry-pi/drivers/w1/w1.h
+--- linux-3.12.6/drivers/w1/w1.h	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/w1/w1.h	2013-12-29 10:41:50.000000000 +0100
+@@ -148,6 +148,12 @@
+ 	 */
+ 	u8		(*set_pullup)(void *, int);
+ 
++	/**
++	 * Turns the pullup on/off in bitbanging mode, takes an on/off argument.
++	 * @return -1=Error, 0=completed
++	 */
++	void (*bitbang_pullup) (void *, u8);
++
+ 	/** Really nice hardware can handles the different types of ROM search
+ 	 *  w1_master* is passed to the slave found callback.
+ 	 */
+diff -Nur linux-3.12.6/drivers/w1/w1_int.c linux-raspberry-pi/drivers/w1/w1_int.c
+--- linux-3.12.6/drivers/w1/w1_int.c	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/w1/w1_int.c	2013-12-29 10:41:50.000000000 +0100
+@@ -117,19 +117,21 @@
+ 		printk(KERN_ERR "w1_add_master_device: invalid function set\n");
+ 		return(-EINVAL);
+         }
+-	/* While it would be electrically possible to make a device that
+-	 * generated a strong pullup in bit bang mode, only hardware that
+-	 * controls 1-wire time frames are even expected to support a strong
+-	 * pullup.  w1_io.c would need to support calling set_pullup before
+-	 * the last write_bit operation of a w1_write_8 which it currently
+-	 * doesn't.
+-	 */
++
++	/* bitbanging hardware uses bitbang_pullup, other hardware uses set_pullup
++	 * and takes care of timing itself */
+ 	if (!master->write_byte && !master->touch_bit && master->set_pullup) {
+ 		printk(KERN_ERR "w1_add_master_device: set_pullup requires "
+ 			"write_byte or touch_bit, disabling\n");
+ 		master->set_pullup = NULL;
+ 	}
+ 
++	if (master->set_pullup && master->bitbang_pullup) {
++		printk(KERN_ERR "w1_add_master_device: set_pullup should not "
++		       "be set when bitbang_pullup is used, disabling\n");
++		master->set_pullup = NULL;
++	}
++
+ 	/* Lock until the device is added (or not) to w1_masters. */
+ 	mutex_lock(&w1_mlock);
+ 	/* Search for the first available id (starting at 1). */
+diff -Nur linux-3.12.6/drivers/w1/w1_io.c linux-raspberry-pi/drivers/w1/w1_io.c
+--- linux-3.12.6/drivers/w1/w1_io.c	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/w1/w1_io.c	2013-12-29 10:41:50.000000000 +0100
+@@ -127,10 +127,22 @@
+ static void w1_post_write(struct w1_master *dev)
+ {
+ 	if (dev->pullup_duration) {
+-		if (dev->enable_pullup && dev->bus_master->set_pullup)
+-			dev->bus_master->set_pullup(dev->bus_master->data, 0);
+-		else
++		if (dev->enable_pullup) {
++			if (dev->bus_master->set_pullup) {
++				dev->bus_master->set_pullup(dev->
++							    bus_master->data,
++							    0);
++			} else if (dev->bus_master->bitbang_pullup) {
++				dev->bus_master->
++				    bitbang_pullup(dev->bus_master->data, 1);
+ 			msleep(dev->pullup_duration);
++				dev->bus_master->
++				    bitbang_pullup(dev->bus_master->data, 0);
++			}
++		} else {
++			msleep(dev->pullup_duration);
++		}
++
+ 		dev->pullup_duration = 0;
+ 	}
+ }
+diff -Nur linux-3.12.6/drivers/watchdog/bcm2708_wdog.c linux-raspberry-pi/drivers/watchdog/bcm2708_wdog.c
+--- linux-3.12.6/drivers/watchdog/bcm2708_wdog.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/drivers/watchdog/bcm2708_wdog.c	2013-12-29 10:41:50.000000000 +0100
+@@ -0,0 +1,384 @@
++/*
++ *	Broadcom BCM2708 watchdog driver.
++ *
++ *	(c) Copyright 2010 Broadcom Europe Ltd
++ *
++ *	This program is free software; you can redistribute it and/or
++ *	modify it under the terms of the GNU General Public License
++ *	as published by the Free Software Foundation; either version
++ *	2 of the License, or (at your option) any later version.
++ *
++ *      BCM2708 watchdog driver. Loosely based on wdt driver.
++ */
++
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/types.h>
++#include <linux/miscdevice.h>
++#include <linux/watchdog.h>
++#include <linux/fs.h>
++#include <linux/ioport.h>
++#include <linux/notifier.h>
++#include <linux/reboot.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/uaccess.h>
++#include <mach/platform.h>
++
++#include <asm/system.h>
++
++#define SECS_TO_WDOG_TICKS(x) ((x) << 16)
++#define WDOG_TICKS_TO_SECS(x) ((x) >> 16)
++
++static unsigned long wdog_is_open;
++static uint32_t wdog_ticks;	       /* Ticks to load into wdog timer */
++static char expect_close;
++
++/*
++ *	Module parameters
++ */
++
++#define WD_TIMO 10		       /* Default heartbeat = 60 seconds */
++static int heartbeat = WD_TIMO;	       /* Heartbeat in seconds */
++
++module_param(heartbeat, int, 0);
++MODULE_PARM_DESC(heartbeat,
++	"Watchdog heartbeat in seconds. (0 < heartbeat < 65536, default="
++				__MODULE_STRING(WD_TIMO) ")");
++
++static int nowayout = WATCHDOG_NOWAYOUT;
++module_param(nowayout, int, 0);
++MODULE_PARM_DESC(nowayout,
++	"Watchdog cannot be stopped once started (default="
++				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
++
++static DEFINE_SPINLOCK(wdog_lock);
++
++/**
++ *	Start the watchdog driver.
++ */
++
++static int wdog_start(unsigned long timeout)
++{
++	uint32_t cur;
++	unsigned long flags;
++	spin_lock_irqsave(&wdog_lock, flags);
++
++	/* enable the watchdog */
++	iowrite32(PM_PASSWORD | (timeout & PM_WDOG_TIME_SET),
++		  __io_address(PM_WDOG));
++	cur = ioread32(__io_address(PM_RSTC));
++	iowrite32(PM_PASSWORD | (cur & PM_RSTC_WRCFG_CLR) |
++		  PM_RSTC_WRCFG_FULL_RESET, __io_address(PM_RSTC));
++
++	spin_unlock_irqrestore(&wdog_lock, flags);
++	return 0;
++}
++
++/**
++ *	Stop the watchdog driver.
++ */
++
++static int wdog_stop(void)
++{
++	iowrite32(PM_PASSWORD | PM_RSTC_RESET, __io_address(PM_RSTC));
++	printk(KERN_INFO "watchdog stopped\n");
++	return 0;
++}
++
++/**
++ *	Reload counter one with the watchdog heartbeat. We don't bother
++ *	reloading the cascade counter.
++ */
++
++static void wdog_ping(void)
++{
++	wdog_start(wdog_ticks);
++}
++
++/**
++ *	@t:		the new heartbeat value that needs to be set.
++ *
++ *	Set a new heartbeat value for the watchdog device. If the heartbeat
++ *	value is incorrect we keep the old value and return -EINVAL. If
++ *	successful we return 0.
++ */
++
++static int wdog_set_heartbeat(int t)
++{
++	if (t < 1 || t > WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET))
++		return -EINVAL;
++
++	heartbeat = t;
++	wdog_ticks = SECS_TO_WDOG_TICKS(t);
++	return 0;
++}
++
++/**
++ *	@file: file handle to the watchdog
++ *	@buf: buffer to write (unused as data does not matter here
++ *	@count: count of bytes
++ *	@ppos: pointer to the position to write. No seeks allowed
++ *
++ *	A write to a watchdog device is defined as a keepalive signal.
++ *
++ *      if 'nowayout' is set then normally a close() is ignored. But
++ *      if you write 'V' first then the close() will stop the timer.
++ */
++
++static ssize_t wdog_write(struct file *file, const char __user *buf,
++						size_t count, loff_t *ppos)
++{
++	if (count) {
++		if (!nowayout) {
++			size_t i;
++
++			/* In case it was set long ago */
++			expect_close = 0;
++
++			for (i = 0; i != count; i++) {
++				char c;
++				if (get_user(c, buf + i))
++					return -EFAULT;
++				if (c == 'V')
++					expect_close = 42;
++			}
++		}
++		wdog_ping();
++	}
++	return count;
++}
++
++static int wdog_get_status(void)
++{
++	unsigned long flags;
++	int status = 0;
++	spin_lock_irqsave(&wdog_lock, flags);
++	/* FIXME: readback reset reason */
++	spin_unlock_irqrestore(&wdog_lock, flags);
++	return status;
++}
++
++static uint32_t wdog_get_remaining(void)
++{
++	uint32_t ret = ioread32(__io_address(PM_WDOG));
++	return ret & PM_WDOG_TIME_SET;
++}
++
++/**
++ *	@file: file handle to the device
++ *	@cmd: watchdog command
++ *	@arg: argument pointer
++ *
++ *	The watchdog API defines a common set of functions for all watchdogs
++ *	according to their available features. We only actually usefully support
++ *	querying capabilities and current status.
++ */
++
++static long wdog_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
++{
++	void __user *argp = (void __user *)arg;
++	int __user *p = argp;
++	int new_heartbeat;
++	int status;
++	int options;
++	uint32_t remaining;
++
++	struct watchdog_info ident = {
++		.options =		WDIOF_SETTIMEOUT|
++					WDIOF_MAGICCLOSE|
++					WDIOF_KEEPALIVEPING,
++		.firmware_version =	1,
++		.identity =		"BCM2708",
++	};
++
++	switch (cmd) {
++	case WDIOC_GETSUPPORT:
++		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
++	case WDIOC_GETSTATUS:
++		status = wdog_get_status();
++		return put_user(status, p);
++	case WDIOC_GETBOOTSTATUS:
++		return put_user(0, p);
++	case WDIOC_KEEPALIVE:
++		wdog_ping();
++		return 0;
++	case WDIOC_SETTIMEOUT:
++		if (get_user(new_heartbeat, p))
++			return -EFAULT;
++		if (wdog_set_heartbeat(new_heartbeat))
++			return -EINVAL;
++		wdog_ping();
++		/* Fall */
++	case WDIOC_GETTIMEOUT:
++		return put_user(heartbeat, p);
++	case WDIOC_GETTIMELEFT:
++		remaining = WDOG_TICKS_TO_SECS(wdog_get_remaining());
++		return put_user(remaining, p);
++	case WDIOC_SETOPTIONS:
++		if (get_user(options, p))
++			return -EFAULT;
++		if (options & WDIOS_DISABLECARD)
++			wdog_stop();
++		if (options & WDIOS_ENABLECARD)
++			wdog_start(wdog_ticks);
++		return 0;
++	default:
++		return -ENOTTY;
++	}
++}
++
++/**
++ *	@inode: inode of device
++ *	@file: file handle to device
++ *
++ *	The watchdog device has been opened. The watchdog device is single
++ *	open and on opening we load the counters.
++ */
++
++static int wdog_open(struct inode *inode, struct file *file)
++{
++	if (test_and_set_bit(0, &wdog_is_open))
++		return -EBUSY;
++	/*
++	 *	Activate
++	 */
++	wdog_start(wdog_ticks);
++	return nonseekable_open(inode, file);
++}
++
++/**
++ *	@inode: inode to board
++ *	@file: file handle to board
++ *
++ *	The watchdog has a configurable API. There is a religious dispute
++ *	between people who want their watchdog to be able to shut down and
++ *	those who want to be sure if the watchdog manager dies the machine
++ *	reboots. In the former case we disable the counters, in the latter
++ *	case you have to open it again very soon.
++ */
++
++static int wdog_release(struct inode *inode, struct file *file)
++{
++	if (expect_close == 42) {
++		wdog_stop();
++	} else {
++		printk(KERN_CRIT
++		 "wdt: WDT device closed unexpectedly.  WDT will not stop!\n");
++		wdog_ping();
++	}
++	clear_bit(0, &wdog_is_open);
++	expect_close = 0;
++	return 0;
++}
++
++/**
++ *	@this: our notifier block
++ *	@code: the event being reported
++ *	@unused: unused
++ *
++ *	Our notifier is called on system shutdowns. Turn the watchdog
++ *	off so that it does not fire during the next reboot.
++ */
++
++static int wdog_notify_sys(struct notifier_block *this, unsigned long code,
++	void *unused)
++{
++	if (code == SYS_DOWN || code == SYS_HALT)
++		wdog_stop();
++	return NOTIFY_DONE;
++}
++
++/*
++ *	Kernel Interfaces
++ */
++
++
++static const struct file_operations wdog_fops = {
++	.owner		= THIS_MODULE,
++	.llseek		= no_llseek,
++	.write		= wdog_write,
++	.unlocked_ioctl	= wdog_ioctl,
++	.open		= wdog_open,
++	.release	= wdog_release,
++};
++
++static struct miscdevice wdog_miscdev = {
++	.minor	= WATCHDOG_MINOR,
++	.name	= "watchdog",
++	.fops	= &wdog_fops,
++};
++
++/*
++ *	The WDT card needs to learn about soft shutdowns in order to
++ *	turn the timebomb registers off.
++ */
++
++static struct notifier_block wdog_notifier = {
++	.notifier_call = wdog_notify_sys,
++};
++
++/**
++ *	cleanup_module:
++ *
++ *	Unload the watchdog. You cannot do this with any file handles open.
++ *	If your watchdog is set to continue ticking on close and you unload
++ *	it, well it keeps ticking. We won't get the interrupt but the board
++ *	will not touch PC memory so all is fine. You just have to load a new
++ *	module in 60 seconds or reboot.
++ */
++
++static void __exit wdog_exit(void)
++{
++	misc_deregister(&wdog_miscdev);
++	unregister_reboot_notifier(&wdog_notifier);
++}
++
++static int __init wdog_init(void)
++{
++	int ret;
++
++	/* Check that the heartbeat value is within it's range;
++	   if not reset to the default */
++	if (wdog_set_heartbeat(heartbeat)) {
++		wdog_set_heartbeat(WD_TIMO);
++		printk(KERN_INFO "bcm2708_wdog: heartbeat value must be "
++			"0 < heartbeat < %d, using %d\n",
++				WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET),
++				WD_TIMO);
++	}
++
++	ret = register_reboot_notifier(&wdog_notifier);
++	if (ret) {
++		printk(KERN_ERR
++		      "wdt: cannot register reboot notifier (err=%d)\n", ret);
++		goto out_reboot;
++	}
++
++	ret = misc_register(&wdog_miscdev);
++	if (ret) {
++		printk(KERN_ERR
++			"wdt: cannot register miscdev on minor=%d (err=%d)\n",
++							WATCHDOG_MINOR, ret);
++		goto out_misc;
++	}
++
++	printk(KERN_INFO "bcm2708 watchdog, heartbeat=%d sec (nowayout=%d)\n",
++		heartbeat, nowayout);
++	return 0;
++
++out_misc:
++	unregister_reboot_notifier(&wdog_notifier);
++out_reboot:
++	return ret;
++}
++
++module_init(wdog_init);
++module_exit(wdog_exit);
++
++MODULE_AUTHOR("Luke Diamand");
++MODULE_DESCRIPTION("Driver for BCM2708 watchdog");
++MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
++MODULE_ALIAS_MISCDEV(TEMP_MINOR);
++MODULE_LICENSE("GPL");
+diff -Nur linux-3.12.6/drivers/watchdog/Kconfig linux-raspberry-pi/drivers/watchdog/Kconfig
+--- linux-3.12.6/drivers/watchdog/Kconfig	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/watchdog/Kconfig	2013-12-29 10:41:50.000000000 +0100
+@@ -392,6 +392,12 @@
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called retu_wdt.
+ 
++config BCM2708_WDT
++	tristate "BCM2708 Watchdog"
++	depends on ARCH_BCM2708
++	help
++	  Enables BCM2708 watchdog support.
++
+ # AVR32 Architecture
+ 
+ config AT32AP700X_WDT
+diff -Nur linux-3.12.6/drivers/watchdog/Makefile linux-raspberry-pi/drivers/watchdog/Makefile
+--- linux-3.12.6/drivers/watchdog/Makefile	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/drivers/watchdog/Makefile	2013-12-29 10:41:50.000000000 +0100
+@@ -54,6 +54,7 @@
+ obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
+ obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o
+ obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
++obj-$(CONFIG_BCM2708_WDT) += bcm2708_wdog.o
+ obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
+ 
+ # AVR32 Architecture
+diff -Nur linux-3.12.6/include/linux/broadcom/vc_cma.h linux-raspberry-pi/include/linux/broadcom/vc_cma.h
+--- linux-3.12.6/include/linux/broadcom/vc_cma.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/include/linux/broadcom/vc_cma.h	2013-12-29 10:42:10.000000000 +0100
+@@ -0,0 +1,29 @@
++/*****************************************************************************
++* Copyright 2012 Broadcom Corporation.  All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#if !defined( VC_CMA_H )
++#define VC_CMA_H
++
++#include <linux/ioctl.h>
++
++#define VC_CMA_IOC_MAGIC 0xc5
++
++#define VC_CMA_IOC_RESERVE _IO(VC_CMA_IOC_MAGIC, 0)
++
++#ifdef __KERNEL__
++extern void __init vc_cma_early_init(void);
++extern void __init vc_cma_reserve(void);
++#endif
++
++#endif /* VC_CMA_H */
+diff -Nur linux-3.12.6/include/linux/mmc/host.h linux-raspberry-pi/include/linux/mmc/host.h
+--- linux-3.12.6/include/linux/mmc/host.h	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/include/linux/mmc/host.h	2013-12-29 10:42:14.000000000 +0100
+@@ -281,6 +281,7 @@
+ 				 MMC_CAP2_PACKED_WR)
+ #define MMC_CAP2_NO_PRESCAN_POWERUP (1 << 14)	/* Don't power up before scan */
+ #define MMC_CAP2_SANITIZE	(1 << 15)		/* Support Sanitize */
++#define MMC_CAP2_FORCE_MULTIBLOCK (1 << 31)	/* Always use multiblock transfers */
+ 
+ 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
+ 
+diff -Nur linux-3.12.6/include/linux/mmc/sdhci.h linux-raspberry-pi/include/linux/mmc/sdhci.h
+--- linux-3.12.6/include/linux/mmc/sdhci.h	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/include/linux/mmc/sdhci.h	2013-12-29 10:42:14.000000000 +0100
+@@ -100,6 +100,7 @@
+ #define SDHCI_QUIRK2_BROKEN_HOST_CONTROL		(1<<5)
+ 
+ 	int irq;		/* Device IRQ */
++	int second_irq; 	/* Additional IRQ to disable/enable in low-latency mode */
+ 	void __iomem *ioaddr;	/* Mapped address */
+ 
+ 	const struct sdhci_ops *ops;	/* Low level hw interface */
+@@ -131,6 +132,7 @@
+ #define SDHCI_SDIO_IRQ_ENABLED	(1<<9)	/* SDIO irq enabled */
+ #define SDHCI_SDR104_NEEDS_TUNING (1<<10)	/* SDR104/HS200 needs tuning */
+ #define SDHCI_USING_RETUNING_TIMER (1<<11)	/* Host is using a retuning timer for the card */
++#define SDHCI_USE_PLATDMA       (1<<12) /* Host uses 3rd party DMA */
+ 
+ 	unsigned int version;	/* SDHCI spec. version */
+ 
+@@ -146,6 +148,7 @@
+ 
+ 	struct mmc_request *mrq;	/* Current request */
+ 	struct mmc_command *cmd;	/* Current command */
++	int	last_cmdop;	/* Opcode of last cmd sent */
+ 	struct mmc_data *data;	/* Current data request */
+ 	unsigned int data_early:1;	/* Data finished before cmd */
+ 
+diff -Nur linux-3.12.6/include/sound/soc-dai.h linux-raspberry-pi/include/sound/soc-dai.h
+--- linux-3.12.6/include/sound/soc-dai.h	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/include/sound/soc-dai.h	2013-12-29 10:42:16.000000000 +0100
+@@ -105,6 +105,8 @@
+ int snd_soc_dai_set_pll(struct snd_soc_dai *dai,
+ 	int pll_id, int source, unsigned int freq_in, unsigned int freq_out);
+ 
++int snd_soc_dai_set_bclk_ratio(struct snd_soc_dai *dai, unsigned int ratio);
++
+ /* Digital Audio interface formatting */
+ int snd_soc_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt);
+ 
+@@ -131,6 +133,7 @@
+ 	int (*set_pll)(struct snd_soc_dai *dai, int pll_id, int source,
+ 		unsigned int freq_in, unsigned int freq_out);
+ 	int (*set_clkdiv)(struct snd_soc_dai *dai, int div_id, int div);
++	int (*set_bclk_ratio)(struct snd_soc_dai *dai, unsigned int ratio);
+ 
+ 	/*
+ 	 * DAI format configuration
+diff -Nur linux-3.12.6/include/uapi/linux/fb.h linux-raspberry-pi/include/uapi/linux/fb.h
+--- linux-3.12.6/include/uapi/linux/fb.h	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/include/uapi/linux/fb.h	2013-12-29 10:42:16.000000000 +0100
+@@ -34,6 +34,11 @@
+ #define FBIOPUT_MODEINFO        0x4617
+ #define FBIOGET_DISPINFO        0x4618
+ #define FBIO_WAITFORVSYNC	_IOW('F', 0x20, __u32)
++/*
++ * HACK: use 'z' in order not to clash with any other ioctl numbers which might
++ * be concurrently added to the mainline kernel
++ */
++#define FBIOCOPYAREA		_IOW('z', 0x21, struct fb_copyarea)
+ 
+ #define FB_TYPE_PACKED_PIXELS		0	/* Packed Pixels	*/
+ #define FB_TYPE_PLANES			1	/* Non interleaved planes */
+diff -Nur linux-3.12.6/sound/arm/bcm2835.c linux-raspberry-pi/sound/arm/bcm2835.c
+--- linux-3.12.6/sound/arm/bcm2835.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/sound/arm/bcm2835.c	2013-12-29 10:42:25.000000000 +0100
+@@ -0,0 +1,413 @@
++/*****************************************************************************
++* Copyright 2011 Broadcom Corporation.  All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#include <linux/platform_device.h>
++
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/module.h>
++
++#include "bcm2835.h"
++
++/* module parameters (see "Module Parameters") */
++/* SNDRV_CARDS: maximum number of cards supported by this module */
++static int index[MAX_SUBSTREAMS] = {[0 ... (MAX_SUBSTREAMS - 1)] = -1 };
++static char *id[MAX_SUBSTREAMS] = {[0 ... (MAX_SUBSTREAMS - 1)] = NULL };
++static int enable[MAX_SUBSTREAMS] = {[0 ... (MAX_SUBSTREAMS - 1)] = 1 };
++
++/* HACKY global pointers needed for successive probes to work : ssp
++ * But compared against the changes we will have to do in VC audio_ipc code
++ * to export 8 audio_ipc devices as a single IPC device and then monitor all
++ * four devices in a thread, this gets things done quickly and should be easier
++ * to debug if we run into issues
++ */
++
++static struct snd_card *g_card = NULL;
++static bcm2835_chip_t *g_chip = NULL;
++
++static int snd_bcm2835_free(bcm2835_chip_t * chip)
++{
++	kfree(chip);
++	return 0;
++}
++
++/* component-destructor
++ * (see "Management of Cards and Components")
++ */
++static int snd_bcm2835_dev_free(struct snd_device *device)
++{
++	return snd_bcm2835_free(device->device_data);
++}
++
++/* chip-specific constructor
++ * (see "Management of Cards and Components")
++ */
++static int snd_bcm2835_create(struct snd_card *card,
++					struct platform_device *pdev,
++					bcm2835_chip_t ** rchip)
++{
++	bcm2835_chip_t *chip;
++	int err;
++	static struct snd_device_ops ops = {
++		.dev_free = snd_bcm2835_dev_free,
++	};
++
++	*rchip = NULL;
++
++	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
++	if (chip == NULL)
++		return -ENOMEM;
++
++	chip->card = card;
++
++	err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
++	if (err < 0) {
++		snd_bcm2835_free(chip);
++		return err;
++	}
++
++	*rchip = chip;
++	return 0;
++}
++
++static int snd_bcm2835_alsa_probe(struct platform_device *pdev)
++{
++	static int dev;
++	bcm2835_chip_t *chip;
++	struct snd_card *card;
++	int err;
++
++	if (dev >= MAX_SUBSTREAMS)
++		return -ENODEV;
++
++	if (!enable[dev]) {
++		dev++;
++		return -ENOENT;
++	}
++
++	if (dev > 0)
++		goto add_register_map;
++
++	err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &g_card);
++	if (err < 0)
++		goto out;
++
++	snd_card_set_dev(g_card, &pdev->dev);
++	strcpy(g_card->driver, "BRCM bcm2835 ALSA Driver");
++	strcpy(g_card->shortname, "bcm2835 ALSA");
++	sprintf(g_card->longname, "%s", g_card->shortname);
++
++	err = snd_bcm2835_create(g_card, pdev, &chip);
++	if (err < 0) {
++		dev_err(&pdev->dev, "Failed to create bcm2835 chip\n");
++		goto out_bcm2835_create;
++	}
++
++	g_chip = chip;
++	err = snd_bcm2835_new_pcm(chip);
++	if (err < 0) {
++		dev_err(&pdev->dev, "Failed to create new BCM2835 pcm device\n");
++		goto out_bcm2835_new_pcm;
++	}
++
++	err = snd_bcm2835_new_ctl(chip);
++	if (err < 0) {
++		dev_err(&pdev->dev, "Failed to create new BCM2835 ctl\n");
++		goto out_bcm2835_new_ctl;
++	}
++
++add_register_map:
++	card = g_card;
++	chip = g_chip;
++
++	BUG_ON(!(card && chip));
++
++	chip->avail_substreams |= (1 << dev);
++	chip->pdev[dev] = pdev;
++
++	if (dev == 0) {
++		err = snd_card_register(card);
++		if (err < 0) {
++			dev_err(&pdev->dev,
++				"Failed to register bcm2835 ALSA card \n");
++			goto out_card_register;
++		}
++		platform_set_drvdata(pdev, card);
++		audio_info("bcm2835 ALSA card created!\n");
++	} else {
++		audio_info("bcm2835 ALSA chip created!\n");
++		platform_set_drvdata(pdev, (void *)dev);
++	}
++
++	dev++;
++
++	return 0;
++
++out_card_register:
++out_bcm2835_new_ctl:
++out_bcm2835_new_pcm:
++out_bcm2835_create:
++	BUG_ON(!g_card);
++	if (snd_card_free(g_card))
++		dev_err(&pdev->dev, "Failed to free Registered alsa card\n");
++	g_card = NULL;
++out:
++	dev = SNDRV_CARDS;	/* stop more avail_substreams from being probed */
++	dev_err(&pdev->dev, "BCM2835 ALSA Probe failed !!\n");
++	return err;
++}
++
++static int snd_bcm2835_alsa_remove(struct platform_device *pdev)
++{
++	uint32_t idx;
++	void *drv_data;
++
++	drv_data = platform_get_drvdata(pdev);
++
++	if (drv_data == (void *)g_card) {
++		/* This is the card device */
++		snd_card_free((struct snd_card *)drv_data);
++		g_card = NULL;
++		g_chip = NULL;
++	} else {
++		idx = (uint32_t) drv_data;
++		if (g_card != NULL) {
++			BUG_ON(!g_chip);
++			/* We pass chip device numbers in audio ipc devices
++			 * other than the one we registered our card with
++			 */
++			idx = (uint32_t) drv_data;
++			BUG_ON(!idx || idx > MAX_SUBSTREAMS);
++			g_chip->avail_substreams &= ~(1 << idx);
++			/* There should be atleast one substream registered
++			 * after we are done here, as it wil be removed when
++			 * the *remove* is called for the card device
++			 */
++			BUG_ON(!g_chip->avail_substreams);
++		}
++	}
++
++	platform_set_drvdata(pdev, NULL);
++
++	return 0;
++}
++
++#ifdef CONFIG_PM
++static int snd_bcm2835_alsa_suspend(struct platform_device *pdev,
++				    pm_message_t state)
++{
++	return 0;
++}
++
++static int snd_bcm2835_alsa_resume(struct platform_device *pdev)
++{
++	return 0;
++}
++
++#endif
++
++static struct platform_driver bcm2835_alsa0_driver = {
++	.probe = snd_bcm2835_alsa_probe,
++	.remove = snd_bcm2835_alsa_remove,
++#ifdef CONFIG_PM
++	.suspend = snd_bcm2835_alsa_suspend,
++	.resume = snd_bcm2835_alsa_resume,
++#endif
++	.driver = {
++		   .name = "bcm2835_AUD0",
++		   .owner = THIS_MODULE,
++		   },
++};
++
++static struct platform_driver bcm2835_alsa1_driver = {
++	.probe = snd_bcm2835_alsa_probe,
++	.remove = snd_bcm2835_alsa_remove,
++#ifdef CONFIG_PM
++	.suspend = snd_bcm2835_alsa_suspend,
++	.resume = snd_bcm2835_alsa_resume,
++#endif
++	.driver = {
++		   .name = "bcm2835_AUD1",
++		   .owner = THIS_MODULE,
++		   },
++};
++
++static struct platform_driver bcm2835_alsa2_driver = {
++	.probe = snd_bcm2835_alsa_probe,
++	.remove = snd_bcm2835_alsa_remove,
++#ifdef CONFIG_PM
++	.suspend = snd_bcm2835_alsa_suspend,
++	.resume = snd_bcm2835_alsa_resume,
++#endif
++	.driver = {
++		   .name = "bcm2835_AUD2",
++		   .owner = THIS_MODULE,
++		   },
++};
++
++static struct platform_driver bcm2835_alsa3_driver = {
++	.probe = snd_bcm2835_alsa_probe,
++	.remove = snd_bcm2835_alsa_remove,
++#ifdef CONFIG_PM
++	.suspend = snd_bcm2835_alsa_suspend,
++	.resume = snd_bcm2835_alsa_resume,
++#endif
++	.driver = {
++		   .name = "bcm2835_AUD3",
++		   .owner = THIS_MODULE,
++		   },
++};
++
++static struct platform_driver bcm2835_alsa4_driver = {
++	.probe = snd_bcm2835_alsa_probe,
++	.remove = snd_bcm2835_alsa_remove,
++#ifdef CONFIG_PM
++	.suspend = snd_bcm2835_alsa_suspend,
++	.resume = snd_bcm2835_alsa_resume,
++#endif
++	.driver = {
++		   .name = "bcm2835_AUD4",
++		   .owner = THIS_MODULE,
++		   },
++};
++
++static struct platform_driver bcm2835_alsa5_driver = {
++	.probe = snd_bcm2835_alsa_probe,
++	.remove = snd_bcm2835_alsa_remove,
++#ifdef CONFIG_PM
++	.suspend = snd_bcm2835_alsa_suspend,
++	.resume = snd_bcm2835_alsa_resume,
++#endif
++	.driver = {
++		   .name = "bcm2835_AUD5",
++		   .owner = THIS_MODULE,
++		   },
++};
++
++static struct platform_driver bcm2835_alsa6_driver = {
++	.probe = snd_bcm2835_alsa_probe,
++	.remove = snd_bcm2835_alsa_remove,
++#ifdef CONFIG_PM
++	.suspend = snd_bcm2835_alsa_suspend,
++	.resume = snd_bcm2835_alsa_resume,
++#endif
++	.driver = {
++		   .name = "bcm2835_AUD6",
++		   .owner = THIS_MODULE,
++		   },
++};
++
++static struct platform_driver bcm2835_alsa7_driver = {
++	.probe = snd_bcm2835_alsa_probe,
++	.remove = snd_bcm2835_alsa_remove,
++#ifdef CONFIG_PM
++	.suspend = snd_bcm2835_alsa_suspend,
++	.resume = snd_bcm2835_alsa_resume,
++#endif
++	.driver = {
++		   .name = "bcm2835_AUD7",
++		   .owner = THIS_MODULE,
++		   },
++};
++
++static int bcm2835_alsa_device_init(void)
++{
++	int err;
++	err = platform_driver_register(&bcm2835_alsa0_driver);
++	if (err) {
++		pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
++		goto out;
++	}
++
++	err = platform_driver_register(&bcm2835_alsa1_driver);
++	if (err) {
++		pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
++		goto unregister_0;
++	}
++
++	err = platform_driver_register(&bcm2835_alsa2_driver);
++	if (err) {
++		pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
++		goto unregister_1;
++	}
++
++	err = platform_driver_register(&bcm2835_alsa3_driver);
++	if (err) {
++		pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
++		goto unregister_2;
++	}
++
++	err = platform_driver_register(&bcm2835_alsa4_driver);
++	if (err) {
++		pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
++		goto unregister_3;
++	}
++
++	err = platform_driver_register(&bcm2835_alsa5_driver);
++	if (err) {
++		pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
++		goto unregister_4;
++	}
++
++	err = platform_driver_register(&bcm2835_alsa6_driver);
++	if (err) {
++		pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
++		goto unregister_5;
++	}
++
++	err = platform_driver_register(&bcm2835_alsa7_driver);
++	if (err) {
++		pr_err("Error registering bcm2835_alsa0_driver %d .\n", err);
++		goto unregister_6;
++	}
++
++	return 0;
++
++unregister_6:
++	platform_driver_unregister(&bcm2835_alsa6_driver);
++unregister_5:
++	platform_driver_unregister(&bcm2835_alsa5_driver);
++unregister_4:
++	platform_driver_unregister(&bcm2835_alsa4_driver);
++unregister_3:
++	platform_driver_unregister(&bcm2835_alsa3_driver);
++unregister_2:
++	platform_driver_unregister(&bcm2835_alsa2_driver);
++unregister_1:
++	platform_driver_unregister(&bcm2835_alsa1_driver);
++unregister_0:
++	platform_driver_unregister(&bcm2835_alsa0_driver);
++out:
++	return err;
++}
++
++static void bcm2835_alsa_device_exit(void)
++{
++	platform_driver_unregister(&bcm2835_alsa0_driver);
++	platform_driver_unregister(&bcm2835_alsa1_driver);
++	platform_driver_unregister(&bcm2835_alsa2_driver);
++	platform_driver_unregister(&bcm2835_alsa3_driver);
++	platform_driver_unregister(&bcm2835_alsa4_driver);
++	platform_driver_unregister(&bcm2835_alsa5_driver);
++	platform_driver_unregister(&bcm2835_alsa6_driver);
++	platform_driver_unregister(&bcm2835_alsa7_driver);
++}
++
++late_initcall(bcm2835_alsa_device_init);
++module_exit(bcm2835_alsa_device_exit);
++
++MODULE_AUTHOR("Dom Cobley");
++MODULE_DESCRIPTION("Alsa driver for BCM2835 chip");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:bcm2835_alsa");
+diff -Nur linux-3.12.6/sound/arm/bcm2835-ctl.c linux-raspberry-pi/sound/arm/bcm2835-ctl.c
+--- linux-3.12.6/sound/arm/bcm2835-ctl.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/sound/arm/bcm2835-ctl.c	2013-12-29 10:42:25.000000000 +0100
+@@ -0,0 +1,200 @@
++/*****************************************************************************
++* Copyright 2011 Broadcom Corporation.  All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#include <linux/platform_device.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/jiffies.h>
++#include <linux/slab.h>
++#include <linux/time.h>
++#include <linux/wait.h>
++#include <linux/delay.h>
++#include <linux/moduleparam.h>
++#include <linux/sched.h>
++
++#include <sound/core.h>
++#include <sound/control.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/rawmidi.h>
++#include <sound/initval.h>
++#include <sound/tlv.h>
++
++#include "bcm2835.h"
++
++/* volume maximum and minimum in terms of 0.01dB */
++#define CTRL_VOL_MAX 400
++#define CTRL_VOL_MIN -10239 /* originally -10240 */
++
++
++static int snd_bcm2835_ctl_info(struct snd_kcontrol *kcontrol,
++				struct snd_ctl_elem_info *uinfo)
++{
++	audio_info(" ... IN\n");
++	if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) {
++		uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++		uinfo->count = 1;
++		uinfo->value.integer.min = CTRL_VOL_MIN;
++		uinfo->value.integer.max = CTRL_VOL_MAX;      /* 2303 */
++	} else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) {
++		uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
++		uinfo->count = 1;
++		uinfo->value.integer.min = 0;
++		uinfo->value.integer.max = 1;
++	} else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE) {
++		uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
++		uinfo->count = 1;
++		uinfo->value.integer.min = 0;
++		uinfo->value.integer.max = AUDIO_DEST_MAX-1;
++	}
++	audio_info(" ... OUT\n");
++	return 0;
++}
++
++/* toggles mute on or off depending on the value of nmute, and returns
++ * 1 if the mute value was changed, otherwise 0
++ */
++static int toggle_mute(struct bcm2835_chip *chip, int nmute)
++{
++	/* if settings are ok, just return 0 */
++	if(chip->mute == nmute)
++		return 0;
++
++	/* if the sound is muted then we need to unmute */
++	if(chip->mute == CTRL_VOL_MUTE)
++	{
++		chip->volume = chip->old_volume; /* copy the old volume back */
++		audio_info("Unmuting, old_volume = %d, volume = %d ...\n", chip->old_volume, chip->volume);
++	}
++	else /* otherwise we mute */
++	{
++		chip->old_volume = chip->volume;
++		chip->volume = 26214; /* set volume to minimum level AKA mute */
++		audio_info("Muting, old_volume = %d, volume = %d ...\n", chip->old_volume, chip->volume);
++	}
++
++	chip->mute = nmute;
++	return 1;
++}
++
++static int snd_bcm2835_ctl_get(struct snd_kcontrol *kcontrol,
++			       struct snd_ctl_elem_value *ucontrol)
++{
++	struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol);
++
++	BUG_ON(!chip && !(chip->avail_substreams & AVAIL_SUBSTREAMS_MASK));
++
++	if (kcontrol->private_value == PCM_PLAYBACK_VOLUME)
++		ucontrol->value.integer.value[0] = chip2alsa(chip->volume);
++	else if (kcontrol->private_value == PCM_PLAYBACK_MUTE)
++		ucontrol->value.integer.value[0] = chip->mute;
++	else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE)
++		ucontrol->value.integer.value[0] = chip->dest;
++
++	return 0;
++}
++
++static int snd_bcm2835_ctl_put(struct snd_kcontrol *kcontrol,
++			       struct snd_ctl_elem_value *ucontrol)
++{
++	struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol);
++	int changed = 0;
++
++	if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) {
++		audio_info("Volume change attempted.. volume = %d new_volume = %d\n", chip->volume, (int)ucontrol->value.integer.value[0]);
++		if (chip->mute == CTRL_VOL_MUTE) {
++			/* changed = toggle_mute(chip, CTRL_VOL_UNMUTE); */
++			return 1; /* should return 0 to signify no change but the mixer takes this as the opposite sign (no idea why) */
++		}
++		if (changed
++		    || (ucontrol->value.integer.value[0] != chip2alsa(chip->volume))) {
++
++			chip->volume = alsa2chip(ucontrol->value.integer.value[0]);
++			changed = 1;
++		}
++
++	} else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) {
++		/* Now implemented */
++		audio_info(" Mute attempted\n");
++		changed = toggle_mute(chip, ucontrol->value.integer.value[0]);
++
++	} else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE) {
++		if (ucontrol->value.integer.value[0] != chip->dest) {
++			chip->dest = ucontrol->value.integer.value[0];
++			changed = 1;
++		}
++	}
++
++	if (changed) {
++		if (bcm2835_audio_set_ctls(chip))
++			printk(KERN_ERR "Failed to set ALSA controls..\n");
++	}
++
++	return changed;
++}
++
++static DECLARE_TLV_DB_SCALE(snd_bcm2835_db_scale, CTRL_VOL_MIN, 1, 1);
++
++static struct snd_kcontrol_new snd_bcm2835_ctl[] = {
++	{
++	 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++	 .name = "PCM Playback Volume",
++	 .index = 0,
++	 .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ,
++	 .private_value = PCM_PLAYBACK_VOLUME,
++	 .info = snd_bcm2835_ctl_info,
++	 .get = snd_bcm2835_ctl_get,
++	 .put = snd_bcm2835_ctl_put,
++	 .count = 1,
++	 .tlv = {.p = snd_bcm2835_db_scale}
++	},
++	{
++	 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++	 .name = "PCM Playback Switch",
++	 .index = 0,
++	 .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
++	 .private_value = PCM_PLAYBACK_MUTE,
++	 .info = snd_bcm2835_ctl_info,
++	 .get = snd_bcm2835_ctl_get,
++	 .put = snd_bcm2835_ctl_put,
++	 .count = 1,
++	 },
++	{
++	 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++	 .name = "PCM Playback Route",
++	 .index = 0,
++	 .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
++	 .private_value = PCM_PLAYBACK_DEVICE,
++	 .info = snd_bcm2835_ctl_info,
++	 .get = snd_bcm2835_ctl_get,
++	 .put = snd_bcm2835_ctl_put,
++	 .count = 1,
++	},
++};
++
++int snd_bcm2835_new_ctl(bcm2835_chip_t * chip)
++{
++	int err;
++	unsigned int idx;
++
++	strcpy(chip->card->mixername, "Broadcom Mixer");
++	for (idx = 0; idx < ARRAY_SIZE(snd_bcm2835_ctl); idx++) {
++		err =
++		    snd_ctl_add(chip->card,
++				snd_ctl_new1(&snd_bcm2835_ctl[idx], chip));
++		if (err < 0)
++			return err;
++	}
++	return 0;
++}
+diff -Nur linux-3.12.6/sound/arm/bcm2835.h linux-raspberry-pi/sound/arm/bcm2835.h
+--- linux-3.12.6/sound/arm/bcm2835.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/sound/arm/bcm2835.h	2013-12-29 10:42:25.000000000 +0100
+@@ -0,0 +1,157 @@
++/*****************************************************************************
++* Copyright 2011 Broadcom Corporation.  All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#ifndef __SOUND_ARM_BCM2835_H
++#define __SOUND_ARM_BCM2835_H
++
++#include <linux/device.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/wait.h>
++#include <sound/core.h>
++#include <sound/initval.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/pcm-indirect.h>
++#include <linux/workqueue.h>
++
++/*
++#define AUDIO_DEBUG_ENABLE
++#define AUDIO_VERBOSE_DEBUG_ENABLE
++*/
++
++/* Debug macros */
++
++#ifdef AUDIO_DEBUG_ENABLE
++#ifdef AUDIO_VERBOSE_DEBUG_ENABLE
++
++#define audio_debug(fmt, arg...)	\
++	printk(KERN_INFO"%s:%d " fmt, __func__, __LINE__, ##arg)
++
++#define audio_info(fmt, arg...)	\
++	printk(KERN_INFO"%s:%d " fmt, __func__, __LINE__, ##arg)
++
++#else
++
++#define audio_debug(fmt, arg...)
++
++#define audio_info(fmt, arg...)
++
++#endif /* AUDIO_VERBOSE_DEBUG_ENABLE */
++
++#else
++
++#define audio_debug(fmt, arg...)
++
++#define audio_info(fmt, arg...)
++
++#endif /* AUDIO_DEBUG_ENABLE */
++
++#define audio_error(fmt, arg...)	\
++	printk(KERN_ERR"%s:%d " fmt, __func__, __LINE__, ##arg)
++
++#define audio_warning(fmt, arg...)	\
++	printk(KERN_WARNING"%s:%d " fmt, __func__, __LINE__, ##arg)
++
++#define audio_alert(fmt, arg...)	\
++	printk(KERN_ALERT"%s:%d " fmt, __func__, __LINE__, ##arg)
++
++#define MAX_SUBSTREAMS			(8)
++#define AVAIL_SUBSTREAMS_MASK		(0xff)
++enum {
++	CTRL_VOL_MUTE,
++	CTRL_VOL_UNMUTE
++};
++
++/* macros for alsa2chip and chip2alsa, instead of functions */
++
++#define alsa2chip(vol) (uint)(-((vol << 8) / 100))	/* convert alsa to chip volume (defined as macro rather than function call) */
++#define chip2alsa(vol) -((vol * 100) >> 8)			/* convert chip to alsa volume */
++
++/* Some constants for values .. */
++typedef enum {
++	AUDIO_DEST_AUTO = 0,
++	AUDIO_DEST_HEADPHONES = 1,
++	AUDIO_DEST_HDMI = 2,
++	AUDIO_DEST_MAX,
++} SND_BCM2835_ROUTE_T;
++
++typedef enum {
++	PCM_PLAYBACK_VOLUME,
++	PCM_PLAYBACK_MUTE,
++	PCM_PLAYBACK_DEVICE,
++} SND_BCM2835_CTRL_T;
++
++/* definition of the chip-specific record */
++typedef struct bcm2835_chip {
++	struct snd_card *card;
++	struct snd_pcm *pcm;
++	/* Bitmat for valid reg_base and irq numbers */
++	uint32_t avail_substreams;
++	struct platform_device *pdev[MAX_SUBSTREAMS];
++	struct bcm2835_alsa_stream *alsa_stream[MAX_SUBSTREAMS];
++
++	int volume;
++	int old_volume; /* stores the volume value whist muted */
++	int dest;
++	int mute;
++} bcm2835_chip_t;
++
++typedef struct bcm2835_alsa_stream {
++	bcm2835_chip_t *chip;
++	struct snd_pcm_substream *substream;
++	struct snd_pcm_indirect pcm_indirect;
++
++	struct semaphore buffers_update_sem;
++	struct semaphore control_sem;
++	spinlock_t lock;
++	volatile uint32_t control;
++	volatile uint32_t status;
++
++	int open;
++	int running;
++	int draining;
++
++	unsigned int pos;
++	unsigned int buffer_size;
++	unsigned int period_size;
++
++	uint32_t enable_fifo_irq;
++	irq_handler_t fifo_irq_handler;
++
++	atomic_t retrieved;
++	struct opaque_AUDIO_INSTANCE_T *instance;
++	struct workqueue_struct *my_wq;
++	int idx;
++} bcm2835_alsa_stream_t;
++
++int snd_bcm2835_new_ctl(bcm2835_chip_t * chip);
++int snd_bcm2835_new_pcm(bcm2835_chip_t * chip);
++
++int bcm2835_audio_open(bcm2835_alsa_stream_t * alsa_stream);
++int bcm2835_audio_close(bcm2835_alsa_stream_t * alsa_stream);
++int bcm2835_audio_set_params(bcm2835_alsa_stream_t * alsa_stream,
++			     uint32_t channels, uint32_t samplerate,
++			     uint32_t bps);
++int bcm2835_audio_setup(bcm2835_alsa_stream_t * alsa_stream);
++int bcm2835_audio_start(bcm2835_alsa_stream_t * alsa_stream);
++int bcm2835_audio_stop(bcm2835_alsa_stream_t * alsa_stream);
++int bcm2835_audio_set_ctls(bcm2835_chip_t * chip);
++int bcm2835_audio_write(bcm2835_alsa_stream_t * alsa_stream, uint32_t count,
++			void *src);
++uint32_t bcm2835_audio_retrieve_buffers(bcm2835_alsa_stream_t * alsa_stream);
++void bcm2835_audio_flush_buffers(bcm2835_alsa_stream_t * alsa_stream);
++void bcm2835_audio_flush_playback_buffers(bcm2835_alsa_stream_t * alsa_stream);
++
++#endif /* __SOUND_ARM_BCM2835_H */
+diff -Nur linux-3.12.6/sound/arm/bcm2835-pcm.c linux-raspberry-pi/sound/arm/bcm2835-pcm.c
+--- linux-3.12.6/sound/arm/bcm2835-pcm.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/sound/arm/bcm2835-pcm.c	2013-12-29 10:42:25.000000000 +0100
+@@ -0,0 +1,426 @@
++/*****************************************************************************
++* Copyright 2011 Broadcom Corporation.  All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#include <linux/interrupt.h>
++#include <linux/slab.h>
++
++#include "bcm2835.h"
++
++/* hardware definition */
++static struct snd_pcm_hardware snd_bcm2835_playback_hw = {
++	.info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
++		 SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID),
++	.formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE,
++	.rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000,
++	.rate_min = 8000,
++	.rate_max = 48000,
++	.channels_min = 1,
++	.channels_max = 2,
++	.buffer_bytes_max = 128 * 1024,
++	.period_bytes_min =   1 * 1024,
++	.period_bytes_max = 128 * 1024,
++	.periods_min = 1,
++	.periods_max = 128,
++};
++
++static void snd_bcm2835_playback_free(struct snd_pcm_runtime *runtime)
++{
++	audio_info("Freeing up alsa stream here ..\n");
++	if (runtime->private_data)
++		kfree(runtime->private_data);
++	runtime->private_data = NULL;
++}
++
++static irqreturn_t bcm2835_playback_fifo_irq(int irq, void *dev_id)
++{
++	bcm2835_alsa_stream_t *alsa_stream = (bcm2835_alsa_stream_t *) dev_id;
++	uint32_t consumed = 0;
++	int new_period = 0;
++
++	audio_info(" .. IN\n");
++
++	audio_info("alsa_stream=%p substream=%p\n", alsa_stream,
++		   alsa_stream ? alsa_stream->substream : 0);
++
++	if (alsa_stream->open)
++		consumed = bcm2835_audio_retrieve_buffers(alsa_stream);
++
++	/* We get called only if playback was triggered, So, the number of buffers we retrieve in
++	 * each iteration are the buffers that have been played out already
++	 */
++
++	if (alsa_stream->period_size) {
++		if ((alsa_stream->pos / alsa_stream->period_size) !=
++		    ((alsa_stream->pos + consumed) / alsa_stream->period_size))
++			new_period = 1;
++	}
++	audio_debug("updating pos cur: %d + %d max:%d period_bytes:%d, hw_ptr: %d new_period:%d\n",
++		      alsa_stream->pos,
++		      consumed,
++		      alsa_stream->buffer_size,
++			  (int)(alsa_stream->period_size*alsa_stream->substream->runtime->periods),
++			  frames_to_bytes(alsa_stream->substream->runtime, alsa_stream->substream->runtime->status->hw_ptr),
++			  new_period);
++	if (alsa_stream->buffer_size) {
++		alsa_stream->pos += consumed &~ (1<<30);
++		alsa_stream->pos %= alsa_stream->buffer_size;
++	}
++
++	if (alsa_stream->substream) {
++		if (new_period)
++			snd_pcm_period_elapsed(alsa_stream->substream);
++	} else {
++		audio_warning(" unexpected NULL substream\n");
++	}
++	audio_info(" .. OUT\n");
++
++	return IRQ_HANDLED;
++}
++
++/* open callback */
++static int snd_bcm2835_playback_open(struct snd_pcm_substream *substream)
++{
++	bcm2835_chip_t *chip = snd_pcm_substream_chip(substream);
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	bcm2835_alsa_stream_t *alsa_stream;
++	int idx;
++	int err;
++
++	audio_info(" .. IN (%d)\n", substream->number);
++
++	audio_info("Alsa open (%d)\n", substream->number);
++	idx = substream->number;
++
++	if (idx > MAX_SUBSTREAMS) {
++		audio_error
++		    ("substream(%d) device doesn't exist max(%d) substreams allowed\n",
++		     idx, MAX_SUBSTREAMS);
++		err = -ENODEV;
++		goto out;
++	}
++
++	/* Check if we are ready */
++	if (!(chip->avail_substreams & (1 << idx))) {
++		/* We are not ready yet */
++		audio_error("substream(%d) device is not ready yet\n", idx);
++		err = -EAGAIN;
++		goto out;
++	}
++
++	alsa_stream = kzalloc(sizeof(bcm2835_alsa_stream_t), GFP_KERNEL);
++	if (alsa_stream == NULL) {
++		return -ENOMEM;
++	}
++
++	/* Initialise alsa_stream */
++	alsa_stream->chip = chip;
++	alsa_stream->substream = substream;
++	alsa_stream->idx = idx;
++	chip->alsa_stream[idx] = alsa_stream;
++
++	sema_init(&alsa_stream->buffers_update_sem, 0);
++	sema_init(&alsa_stream->control_sem, 0);
++	spin_lock_init(&alsa_stream->lock);
++
++	/* Enabled in start trigger, called on each "fifo irq" after that */
++	alsa_stream->enable_fifo_irq = 0;
++	alsa_stream->fifo_irq_handler = bcm2835_playback_fifo_irq;
++
++	runtime->private_data = alsa_stream;
++	runtime->private_free = snd_bcm2835_playback_free;
++	runtime->hw = snd_bcm2835_playback_hw;
++	/* minimum 16 bytes alignment (for vchiq bulk transfers) */
++	snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
++				   16);
++
++	err = bcm2835_audio_open(alsa_stream);
++	if (err != 0) {
++		kfree(alsa_stream);
++		return err;
++	}
++
++	alsa_stream->open = 1;
++	alsa_stream->draining = 1;
++
++out:
++	audio_info(" .. OUT =%d\n", err);
++
++	return err;
++}
++
++/* close callback */
++static int snd_bcm2835_playback_close(struct snd_pcm_substream *substream)
++{
++	/* the hardware-specific codes will be here */
++
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	bcm2835_alsa_stream_t *alsa_stream = runtime->private_data;
++
++	audio_info(" .. IN\n");
++	audio_info("Alsa close\n");
++
++	/*
++	 * Call stop if it's still running. This happens when app
++	 * is force killed and we don't get a stop trigger.
++	 */
++	if (alsa_stream->running) {
++		int err;
++		err = bcm2835_audio_stop(alsa_stream);
++		alsa_stream->running = 0;
++		if (err != 0)
++			audio_error(" Failed to STOP alsa device\n");
++	}
++
++	alsa_stream->period_size = 0;
++	alsa_stream->buffer_size = 0;
++
++	if (alsa_stream->open) {
++		alsa_stream->open = 0;
++		bcm2835_audio_close(alsa_stream);
++	}
++	if (alsa_stream->chip)
++		alsa_stream->chip->alsa_stream[alsa_stream->idx] = NULL;
++	/*
++	 * Do not free up alsa_stream here, it will be freed up by
++	 * runtime->private_free callback we registered in *_open above
++	 */
++
++	audio_info(" .. OUT\n");
++
++	return 0;
++}
++
++/* hw_params callback */
++static int snd_bcm2835_pcm_hw_params(struct snd_pcm_substream *substream,
++				     struct snd_pcm_hw_params *params)
++{
++	int err;
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	bcm2835_alsa_stream_t *alsa_stream =
++	    (bcm2835_alsa_stream_t *) runtime->private_data;
++
++	audio_info(" .. IN\n");
++
++	err = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
++	if (err < 0) {
++		audio_error
++		    (" pcm_lib_malloc failed to allocated pages for buffers\n");
++		return err;
++	}
++
++	err = bcm2835_audio_set_params(alsa_stream, params_channels(params),
++				       params_rate(params),
++				       snd_pcm_format_width(params_format
++							    (params)));
++	if (err < 0) {
++		audio_error(" error setting hw params\n");
++	}
++
++	bcm2835_audio_setup(alsa_stream);
++
++	/* in preparation of the stream, set the controls (volume level) of the stream */
++	bcm2835_audio_set_ctls(alsa_stream->chip);
++
++	audio_info(" .. OUT\n");
++
++	return err;
++}
++
++/* hw_free callback */
++static int snd_bcm2835_pcm_hw_free(struct snd_pcm_substream *substream)
++{
++	audio_info(" .. IN\n");
++	return snd_pcm_lib_free_pages(substream);
++}
++
++/* prepare callback */
++static int snd_bcm2835_pcm_prepare(struct snd_pcm_substream *substream)
++{
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	bcm2835_alsa_stream_t *alsa_stream = runtime->private_data;
++
++	audio_info(" .. IN\n");
++
++	memset(&alsa_stream->pcm_indirect, 0, sizeof(alsa_stream->pcm_indirect));
++
++	alsa_stream->pcm_indirect.hw_buffer_size =
++	alsa_stream->pcm_indirect.sw_buffer_size =
++		snd_pcm_lib_buffer_bytes(substream);
++
++	alsa_stream->buffer_size = snd_pcm_lib_buffer_bytes(substream);
++	alsa_stream->period_size = snd_pcm_lib_period_bytes(substream);
++	alsa_stream->pos = 0;
++
++	audio_debug("buffer_size=%d, period_size=%d pos=%d frame_bits=%d\n",
++		      alsa_stream->buffer_size, alsa_stream->period_size,
++		      alsa_stream->pos, runtime->frame_bits);
++
++	audio_info(" .. OUT\n");
++	return 0;
++}
++
++static void snd_bcm2835_pcm_transfer(struct snd_pcm_substream *substream,
++				    struct snd_pcm_indirect *rec, size_t bytes)
++{
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	bcm2835_alsa_stream_t *alsa_stream = runtime->private_data;
++	void *src = (void *)(substream->runtime->dma_area + rec->sw_data);
++	int err;
++
++	err = bcm2835_audio_write(alsa_stream, bytes, src);
++	if (err)
++		audio_error(" Failed to transfer to alsa device (%d)\n", err);
++
++}
++
++static int snd_bcm2835_pcm_ack(struct snd_pcm_substream *substream)
++{
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	bcm2835_alsa_stream_t *alsa_stream = runtime->private_data;
++	struct snd_pcm_indirect *pcm_indirect = &alsa_stream->pcm_indirect;
++
++	pcm_indirect->hw_queue_size = runtime->hw.buffer_bytes_max;
++	snd_pcm_indirect_playback_transfer(substream, pcm_indirect,
++					   snd_bcm2835_pcm_transfer);
++	return 0;
++}
++
++/* trigger callback */
++static int snd_bcm2835_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
++{
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	bcm2835_alsa_stream_t *alsa_stream = runtime->private_data;
++	int err = 0;
++
++	audio_info(" .. IN\n");
++
++	switch (cmd) {
++	case SNDRV_PCM_TRIGGER_START:
++		audio_debug("bcm2835_AUDIO_TRIGGER_START running=%d\n",
++			      alsa_stream->running);
++		if (!alsa_stream->running) {
++			err = bcm2835_audio_start(alsa_stream);
++			if (err == 0) {
++				alsa_stream->pcm_indirect.hw_io =
++				alsa_stream->pcm_indirect.hw_data =
++					bytes_to_frames(runtime,
++							alsa_stream->pos);
++				substream->ops->ack(substream);
++				alsa_stream->running = 1;
++				alsa_stream->draining = 1;
++			} else {
++				audio_error(" Failed to START alsa device (%d)\n", err);
++			}
++		}
++		break;
++	case SNDRV_PCM_TRIGGER_STOP:
++		audio_debug
++		    ("bcm2835_AUDIO_TRIGGER_STOP running=%d draining=%d\n",
++			     alsa_stream->running, runtime->status->state == SNDRV_PCM_STATE_DRAINING);
++		if (runtime->status->state == SNDRV_PCM_STATE_DRAINING) {
++			audio_info("DRAINING\n");
++			alsa_stream->draining = 1;
++		} else {
++			audio_info("DROPPING\n");
++			alsa_stream->draining = 0;
++		}
++		if (alsa_stream->running) {
++			err = bcm2835_audio_stop(alsa_stream);
++			if (err != 0)
++				audio_error(" Failed to STOP alsa device (%d)\n", err);
++			alsa_stream->running = 0;
++		}
++		break;
++	default:
++		err = -EINVAL;
++	}
++
++	audio_info(" .. OUT\n");
++	return err;
++}
++
++/* pointer callback */
++static snd_pcm_uframes_t
++snd_bcm2835_pcm_pointer(struct snd_pcm_substream *substream)
++{
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	bcm2835_alsa_stream_t *alsa_stream = runtime->private_data;
++
++	audio_info(" .. IN\n");
++
++	audio_debug("pcm_pointer... (%d) hwptr=%d appl=%d pos=%d\n", 0,
++		      frames_to_bytes(runtime, runtime->status->hw_ptr),
++		      frames_to_bytes(runtime, runtime->control->appl_ptr),
++		      alsa_stream->pos);
++
++	audio_info(" .. OUT\n");
++	return snd_pcm_indirect_playback_pointer(substream,
++						 &alsa_stream->pcm_indirect,
++						 alsa_stream->pos);
++}
++
++static int snd_bcm2835_pcm_lib_ioctl(struct snd_pcm_substream *substream,
++				     unsigned int cmd, void *arg)
++{
++	int ret = snd_pcm_lib_ioctl(substream, cmd, arg);
++	audio_info(" .. substream=%p, cmd=%d, arg=%p (%x) ret=%d\n", substream,
++		    cmd, arg, arg ? *(unsigned *)arg : 0, ret);
++	return ret;
++}
++
++/* operators */
++static struct snd_pcm_ops snd_bcm2835_playback_ops = {
++	.open = snd_bcm2835_playback_open,
++	.close = snd_bcm2835_playback_close,
++	.ioctl = snd_bcm2835_pcm_lib_ioctl,
++	.hw_params = snd_bcm2835_pcm_hw_params,
++	.hw_free = snd_bcm2835_pcm_hw_free,
++	.prepare = snd_bcm2835_pcm_prepare,
++	.trigger = snd_bcm2835_pcm_trigger,
++	.pointer = snd_bcm2835_pcm_pointer,
++	.ack = snd_bcm2835_pcm_ack,
++};
++
++/* create a pcm device */
++int snd_bcm2835_new_pcm(bcm2835_chip_t * chip)
++{
++	struct snd_pcm *pcm;
++	int err;
++
++	audio_info(" .. IN\n");
++	err =
++	    snd_pcm_new(chip->card, "bcm2835 ALSA", 0, MAX_SUBSTREAMS, 0, &pcm);
++	if (err < 0)
++		return err;
++	pcm->private_data = chip;
++	strcpy(pcm->name, "bcm2835 ALSA");
++	chip->pcm = pcm;
++	chip->dest = AUDIO_DEST_AUTO;
++	chip->volume = alsa2chip(0);
++	chip->mute = CTRL_VOL_UNMUTE;	/*disable mute on startup */
++	/* set operators */
++	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
++			&snd_bcm2835_playback_ops);
++
++	/* pre-allocation of buffers */
++	/* NOTE: this may fail */
++	snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
++					      snd_dma_continuous_data
++					      (GFP_KERNEL), 64 * 1024,
++					      64 * 1024);
++
++	audio_info(" .. OUT\n");
++
++	return 0;
++}
+diff -Nur linux-3.12.6/sound/arm/bcm2835-vchiq.c linux-raspberry-pi/sound/arm/bcm2835-vchiq.c
+--- linux-3.12.6/sound/arm/bcm2835-vchiq.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/sound/arm/bcm2835-vchiq.c	2013-12-29 10:42:25.000000000 +0100
+@@ -0,0 +1,879 @@
++/*****************************************************************************
++* Copyright 2011 Broadcom Corporation.  All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#include <linux/device.h>
++#include <sound/core.h>
++#include <sound/initval.h>
++#include <sound/pcm.h>
++#include <linux/io.h>
++#include <linux/interrupt.h>
++#include <linux/fs.h>
++#include <linux/file.h>
++#include <linux/mm.h>
++#include <linux/syscalls.h>
++#include <asm/uaccess.h>
++#include <linux/slab.h>
++#include <linux/delay.h>
++#include <linux/atomic.h>
++#include <linux/module.h>
++#include <linux/completion.h>
++
++#include "bcm2835.h"
++
++/* ---- Include Files -------------------------------------------------------- */
++
++#include "interface/vchi/vchi.h"
++#include "vc_vchi_audioserv_defs.h"
++
++/* ---- Private Constants and Types ------------------------------------------ */
++
++#define BCM2835_AUDIO_STOP           0
++#define BCM2835_AUDIO_START          1
++#define BCM2835_AUDIO_WRITE          2
++
++/* Logging macros (for remapping to other logging mechanisms, i.e., printf) */
++#ifdef AUDIO_DEBUG_ENABLE
++	#define LOG_ERR( fmt, arg... )   pr_err( "%s:%d " fmt, __func__, __LINE__, ##arg)
++	#define LOG_WARN( fmt, arg... )  pr_info( "%s:%d " fmt, __func__, __LINE__, ##arg)
++	#define LOG_INFO( fmt, arg... )  pr_info( "%s:%d " fmt, __func__, __LINE__, ##arg)
++	#define LOG_DBG( fmt, arg... )   pr_info( "%s:%d " fmt, __func__, __LINE__, ##arg)
++#else
++	#define LOG_ERR( fmt, arg... )   pr_err( "%s:%d " fmt, __func__, __LINE__, ##arg)
++	#define LOG_WARN( fmt, arg... )
++	#define LOG_INFO( fmt, arg... )
++	#define LOG_DBG( fmt, arg... )
++#endif
++
++typedef struct opaque_AUDIO_INSTANCE_T {
++	uint32_t num_connections;
++	VCHI_SERVICE_HANDLE_T vchi_handle[VCHI_MAX_NUM_CONNECTIONS];
++	struct completion msg_avail_comp;
++	struct mutex vchi_mutex;
++	bcm2835_alsa_stream_t *alsa_stream;
++	int32_t result;
++	short peer_version;
++} AUDIO_INSTANCE_T;
++
++bool force_bulk = false;
++
++/* ---- Private Variables ---------------------------------------------------- */
++
++/* ---- Private Function Prototypes ------------------------------------------ */
++
++/* ---- Private Functions ---------------------------------------------------- */
++
++static int bcm2835_audio_stop_worker(bcm2835_alsa_stream_t * alsa_stream);
++static int bcm2835_audio_start_worker(bcm2835_alsa_stream_t * alsa_stream);
++static int bcm2835_audio_write_worker(bcm2835_alsa_stream_t *alsa_stream,
++				      uint32_t count, void *src);
++
++typedef struct {
++	struct work_struct my_work;
++	bcm2835_alsa_stream_t *alsa_stream;
++	int cmd;
++	void *src;
++	uint32_t count;
++} my_work_t;
++
++static void my_wq_function(struct work_struct *work)
++{
++	my_work_t *w = (my_work_t *) work;
++	int ret = -9;
++	LOG_DBG(" .. IN %p:%d\n", w->alsa_stream, w->cmd);
++	switch (w->cmd) {
++	case BCM2835_AUDIO_START:
++		ret = bcm2835_audio_start_worker(w->alsa_stream);
++		break;
++	case BCM2835_AUDIO_STOP:
++		ret = bcm2835_audio_stop_worker(w->alsa_stream);
++		break;
++	case BCM2835_AUDIO_WRITE:
++		ret = bcm2835_audio_write_worker(w->alsa_stream, w->count,
++						 w->src);
++		break;
++	default:
++		LOG_ERR(" Unexpected work: %p:%d\n", w->alsa_stream, w->cmd);
++		break;
++	}
++	kfree((void *)work);
++	LOG_DBG(" .. OUT %d\n", ret);
++}
++
++int bcm2835_audio_start(bcm2835_alsa_stream_t * alsa_stream)
++{
++	int ret = -1;
++	LOG_DBG(" .. IN\n");
++	if (alsa_stream->my_wq) {
++		my_work_t *work = kmalloc(sizeof(my_work_t), GFP_ATOMIC);
++		/*--- Queue some work (item 1) ---*/
++		if (work) {
++			INIT_WORK((struct work_struct *)work, my_wq_function);
++			work->alsa_stream = alsa_stream;
++			work->cmd = BCM2835_AUDIO_START;
++			if (queue_work
++			    (alsa_stream->my_wq, (struct work_struct *)work))
++				ret = 0;
++		} else
++			LOG_ERR(" .. Error: NULL work kmalloc\n");
++	}
++	LOG_DBG(" .. OUT %d\n", ret);
++	return ret;
++}
++
++int bcm2835_audio_stop(bcm2835_alsa_stream_t * alsa_stream)
++{
++	int ret = -1;
++	LOG_DBG(" .. IN\n");
++	if (alsa_stream->my_wq) {
++		my_work_t *work = kmalloc(sizeof(my_work_t), GFP_ATOMIC);
++		 /*--- Queue some work (item 1) ---*/
++		if (work) {
++			INIT_WORK((struct work_struct *)work, my_wq_function);
++			work->alsa_stream = alsa_stream;
++			work->cmd = BCM2835_AUDIO_STOP;
++			if (queue_work
++			    (alsa_stream->my_wq, (struct work_struct *)work))
++				ret = 0;
++		} else
++			LOG_ERR(" .. Error: NULL work kmalloc\n");
++	}
++	LOG_DBG(" .. OUT %d\n", ret);
++	return ret;
++}
++
++int bcm2835_audio_write(bcm2835_alsa_stream_t *alsa_stream,
++			uint32_t count, void *src)
++{
++	int ret = -1;
++	LOG_DBG(" .. IN\n");
++	if (alsa_stream->my_wq) {
++		my_work_t *work = kmalloc(sizeof(my_work_t), GFP_ATOMIC);
++		 /*--- Queue some work (item 1) ---*/
++		if (work) {
++			INIT_WORK((struct work_struct *)work, my_wq_function);
++			work->alsa_stream = alsa_stream;
++			work->cmd = BCM2835_AUDIO_WRITE;
++			work->src = src;
++			work->count = count;
++			if (queue_work
++			    (alsa_stream->my_wq, (struct work_struct *)work))
++				ret = 0;
++		} else
++			LOG_ERR(" .. Error: NULL work kmalloc\n");
++	}
++	LOG_DBG(" .. OUT %d\n", ret);
++	return ret;
++}
++
++void my_workqueue_init(bcm2835_alsa_stream_t * alsa_stream)
++{
++	alsa_stream->my_wq = create_workqueue("my_queue");
++	return;
++}
++
++void my_workqueue_quit(bcm2835_alsa_stream_t * alsa_stream)
++{
++	if (alsa_stream->my_wq) {
++		flush_workqueue(alsa_stream->my_wq);
++		destroy_workqueue(alsa_stream->my_wq);
++		alsa_stream->my_wq = NULL;
++	}
++	return;
++}
++
++static void audio_vchi_callback(void *param,
++				const VCHI_CALLBACK_REASON_T reason,
++				void *msg_handle)
++{
++	AUDIO_INSTANCE_T *instance = (AUDIO_INSTANCE_T *) param;
++	int32_t status;
++	int32_t msg_len;
++	VC_AUDIO_MSG_T m;
++	bcm2835_alsa_stream_t *alsa_stream = 0;
++	LOG_DBG(" .. IN instance=%p, param=%p, reason=%d, handle=%p\n",
++		instance, param, reason, msg_handle);
++
++	if (!instance || reason != VCHI_CALLBACK_MSG_AVAILABLE) {
++		return;
++	}
++	alsa_stream = instance->alsa_stream;
++	status = vchi_msg_dequeue(instance->vchi_handle[0],
++				  &m, sizeof m, &msg_len, VCHI_FLAGS_NONE);
++	if (m.type == VC_AUDIO_MSG_TYPE_RESULT) {
++		LOG_DBG
++		    (" .. instance=%p, m.type=VC_AUDIO_MSG_TYPE_RESULT, success=%d\n",
++		     instance, m.u.result.success);
++		instance->result = m.u.result.success;
++		complete(&instance->msg_avail_comp);
++	} else if (m.type == VC_AUDIO_MSG_TYPE_COMPLETE) {
++		irq_handler_t callback = (irq_handler_t) m.u.complete.callback;
++		LOG_DBG
++		    (" .. instance=%p, m.type=VC_AUDIO_MSG_TYPE_COMPLETE, complete=%d\n",
++		     instance, m.u.complete.count);
++		if (alsa_stream && callback) {
++			atomic_add(m.u.complete.count, &alsa_stream->retrieved);
++			callback(0, alsa_stream);
++		} else {
++			LOG_DBG(" .. unexpected alsa_stream=%p, callback=%p\n",
++				alsa_stream, callback);
++		}
++	} else {
++		LOG_DBG(" .. unexpected m.type=%d\n", m.type);
++	}
++	LOG_DBG(" .. OUT\n");
++}
++
++static AUDIO_INSTANCE_T *vc_vchi_audio_init(VCHI_INSTANCE_T vchi_instance,
++					    VCHI_CONNECTION_T **
++					    vchi_connections,
++					    uint32_t num_connections)
++{
++	uint32_t i;
++	AUDIO_INSTANCE_T *instance;
++	int status;
++
++	LOG_DBG("%s: start", __func__);
++
++	if (num_connections > VCHI_MAX_NUM_CONNECTIONS) {
++		LOG_ERR("%s: unsupported number of connections %u (max=%u)\n",
++			__func__, num_connections, VCHI_MAX_NUM_CONNECTIONS);
++
++		return NULL;
++	}
++	/* Allocate memory for this instance */
++	instance = kmalloc(sizeof(*instance), GFP_KERNEL);
++
++	memset(instance, 0, sizeof(*instance));
++	instance->num_connections = num_connections;
++
++	/* Create a lock for exclusive, serialized VCHI connection access */
++	mutex_init(&instance->vchi_mutex);
++	/* Open the VCHI service connections */
++	for (i = 0; i < num_connections; i++) {
++		SERVICE_CREATION_T params = {
++			VCHI_VERSION_EX(VC_AUDIOSERV_VER, VC_AUDIOSERV_MIN_VER),
++			VC_AUDIO_SERVER_NAME,	// 4cc service code
++			vchi_connections[i],	// passed in fn pointers
++			0,	// rx fifo size (unused)
++			0,	// tx fifo size (unused)
++			audio_vchi_callback,	// service callback
++			instance,	// service callback parameter
++			1,	//TODO: remove VCOS_FALSE,   // unaligned bulk recieves
++			1,	//TODO: remove VCOS_FALSE,   // unaligned bulk transmits
++			0	// want crc check on bulk transfers
++		};
++
++		status = vchi_service_open(vchi_instance, &params,
++					   &instance->vchi_handle[i]);
++		if (status) {
++			LOG_ERR
++			    ("%s: failed to open VCHI service connection (status=%d)\n",
++			     __func__, status);
++
++			goto err_close_services;
++		}
++		/* Finished with the service for now */
++		vchi_service_release(instance->vchi_handle[i]);
++	}
++
++	return instance;
++
++err_close_services:
++	for (i = 0; i < instance->num_connections; i++) {
++		vchi_service_close(instance->vchi_handle[i]);
++	}
++
++	kfree(instance);
++
++	return NULL;
++}
++
++static int32_t vc_vchi_audio_deinit(AUDIO_INSTANCE_T * instance)
++{
++	uint32_t i;
++
++	LOG_DBG(" .. IN\n");
++
++	if (instance == NULL) {
++		LOG_ERR("%s: invalid handle %p\n", __func__, instance);
++
++		return -1;
++	}
++
++	LOG_DBG(" .. about to lock (%d)\n", instance->num_connections);
++	if(mutex_lock_interruptible(&instance->vchi_mutex))
++	{
++		LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections);
++		return -EINTR;
++	}
++
++	/* Close all VCHI service connections */
++	for (i = 0; i < instance->num_connections; i++) {
++		int32_t success;
++		LOG_DBG(" .. %i:closing %p\n", i, instance->vchi_handle[i]);
++		vchi_service_use(instance->vchi_handle[i]);
++
++		success = vchi_service_close(instance->vchi_handle[i]);
++		if (success != 0) {
++			LOG_ERR
++			    ("%s: failed to close VCHI service connection (status=%d)\n",
++			     __func__, success);
++		}
++	}
++
++	mutex_unlock(&instance->vchi_mutex);
++
++	kfree(instance);
++
++	LOG_DBG(" .. OUT\n");
++
++	return 0;
++}
++
++static int bcm2835_audio_open_connection(bcm2835_alsa_stream_t * alsa_stream)
++{
++	static VCHI_INSTANCE_T vchi_instance;
++	static VCHI_CONNECTION_T *vchi_connection;
++	AUDIO_INSTANCE_T *instance = alsa_stream->instance;
++	int ret;
++	LOG_DBG(" .. IN\n");
++
++	LOG_INFO("%s: start", __func__);
++	//BUG_ON(instance);
++	if (instance) {
++		LOG_ERR("%s: VCHI instance already open (%p)\n",
++			__func__, instance);
++		instance->alsa_stream = alsa_stream;
++		alsa_stream->instance = instance;
++		ret = 0;	// xxx todo -1;
++		goto err_free_mem;
++	}
++
++	/* Initialize and create a VCHI connection */
++	ret = vchi_initialise(&vchi_instance);
++	if (ret != 0) {
++		LOG_ERR("%s: failed to initialise VCHI instance (ret=%d)\n",
++			__func__, ret);
++
++		ret = -EIO;
++		goto err_free_mem;
++	}
++	ret = vchi_connect(NULL, 0, vchi_instance);
++	if (ret != 0) {
++		LOG_ERR("%s: failed to connect VCHI instance (ret=%d)\n",
++			__func__, ret);
++
++		ret = -EIO;
++		goto err_free_mem;
++	}
++
++	/* Initialize an instance of the audio service */
++	instance = vc_vchi_audio_init(vchi_instance, &vchi_connection, 1);
++
++	if (instance == NULL /*|| audio_handle != instance */ ) {
++		LOG_ERR("%s: failed to initialize audio service\n", __func__);
++
++		ret = -EPERM;
++		goto err_free_mem;
++	}
++
++	instance->alsa_stream = alsa_stream;
++	alsa_stream->instance = instance;
++
++	LOG_DBG(" success !\n");
++err_free_mem:
++	LOG_DBG(" .. OUT\n");
++
++	return ret;
++}
++
++int bcm2835_audio_open(bcm2835_alsa_stream_t * alsa_stream)
++{
++	AUDIO_INSTANCE_T *instance;
++	VC_AUDIO_MSG_T m;
++	int32_t success;
++	int ret;
++	LOG_DBG(" .. IN\n");
++
++	my_workqueue_init(alsa_stream);
++
++	ret = bcm2835_audio_open_connection(alsa_stream);
++	if (ret != 0) {
++		ret = -1;
++		goto exit;
++	}
++	instance = alsa_stream->instance;
++
++	if(mutex_lock_interruptible(&instance->vchi_mutex))
++	{
++		LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections);
++		return -EINTR;
++	}
++	vchi_service_use(instance->vchi_handle[0]);
++
++	m.type = VC_AUDIO_MSG_TYPE_OPEN;
++
++	/* Send the message to the videocore */
++	success = vchi_msg_queue(instance->vchi_handle[0],
++				 &m, sizeof m,
++				 VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL);
++
++	if (success != 0) {
++		LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n",
++			__func__, success);
++
++		ret = -1;
++		goto unlock;
++	}
++
++	ret = 0;
++
++unlock:
++	vchi_service_release(instance->vchi_handle[0]);
++	mutex_unlock(&instance->vchi_mutex);
++exit:
++	LOG_DBG(" .. OUT\n");
++	return ret;
++}
++
++static int bcm2835_audio_set_ctls_chan(bcm2835_alsa_stream_t * alsa_stream,
++				       bcm2835_chip_t * chip)
++{
++	VC_AUDIO_MSG_T m;
++	AUDIO_INSTANCE_T *instance = alsa_stream->instance;
++	int32_t success;
++	int ret;
++	LOG_DBG(" .. IN\n");
++
++	LOG_INFO
++	    (" Setting ALSA dest(%d), volume(%d)\n", chip->dest, chip->volume);
++
++	if(mutex_lock_interruptible(&instance->vchi_mutex))
++	{
++		LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections);
++		return -EINTR;
++	}
++	vchi_service_use(instance->vchi_handle[0]);
++
++	instance->result = -1;
++
++	m.type = VC_AUDIO_MSG_TYPE_CONTROL;
++	m.u.control.dest = chip->dest;
++	m.u.control.volume = chip->volume;
++
++	/* Create the message available completion */
++	init_completion(&instance->msg_avail_comp);
++
++	/* Send the message to the videocore */
++	success = vchi_msg_queue(instance->vchi_handle[0],
++				 &m, sizeof m,
++				 VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL);
++
++	if (success != 0) {
++		LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n",
++			__func__, success);
++
++		ret = -1;
++		goto unlock;
++	}
++
++	/* We are expecting a reply from the videocore */
++	ret = wait_for_completion_interruptible(&instance->msg_avail_comp);
++	if (ret) {
++		LOG_ERR("%s: failed on waiting for event (status=%d)\n",
++			__func__, success);
++		goto unlock;
++	}
++
++	if (instance->result != 0) {
++		LOG_ERR("%s: result=%d\n", __func__, instance->result);
++
++		ret = -1;
++		goto unlock;
++	}
++
++	ret = 0;
++
++unlock:
++	vchi_service_release(instance->vchi_handle[0]);
++	mutex_unlock(&instance->vchi_mutex);
++
++	LOG_DBG(" .. OUT\n");
++	return ret;
++}
++
++int bcm2835_audio_set_ctls(bcm2835_chip_t * chip)
++{
++	int i;
++	int ret = 0;
++	LOG_DBG(" .. IN\n");
++
++	/* change ctls for all substreams */
++	for (i = 0; i < MAX_SUBSTREAMS; i++) {
++		if (chip->avail_substreams & (1 << i)) {
++			if (!chip->alsa_stream[i])
++			{
++				LOG_DBG(" No ALSA stream available?! %i:%p (%x)\n", i, chip->alsa_stream[i], chip->avail_substreams);
++				ret = 0;
++			}
++			else if (bcm2835_audio_set_ctls_chan /* returns 0 on success */
++				 (chip->alsa_stream[i], chip) != 0)
++				 {
++					LOG_DBG("Couldn't set the controls for stream %d\n", i);
++					ret = -1;
++				 }
++			else LOG_DBG(" Controls set for stream %d\n", i);
++		}
++	}
++	LOG_DBG(" .. OUT ret=%d\n", ret);
++	return ret;
++}
++
++int bcm2835_audio_set_params(bcm2835_alsa_stream_t * alsa_stream,
++			     uint32_t channels, uint32_t samplerate,
++			     uint32_t bps)
++{
++	VC_AUDIO_MSG_T m;
++	AUDIO_INSTANCE_T *instance = alsa_stream->instance;
++	int32_t success;
++	int ret;
++	LOG_DBG(" .. IN\n");
++
++	LOG_INFO
++	    (" Setting ALSA channels(%d), samplerate(%d), bits-per-sample(%d)\n",
++	     channels, samplerate, bps);
++
++	/* resend ctls - alsa_stream may not have been open when first send */
++	ret = bcm2835_audio_set_ctls_chan(alsa_stream, alsa_stream->chip);
++	if (ret != 0) {
++		LOG_ERR(" Alsa controls not supported\n");
++		return -EINVAL;
++	}
++
++	if(mutex_lock_interruptible(&instance->vchi_mutex))
++	{
++		LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections);
++		return -EINTR;
++	}
++	vchi_service_use(instance->vchi_handle[0]);
++
++	instance->result = -1;
++
++	m.type = VC_AUDIO_MSG_TYPE_CONFIG;
++	m.u.config.channels = channels;
++	m.u.config.samplerate = samplerate;
++	m.u.config.bps = bps;
++
++	/* Create the message available completion */
++	init_completion(&instance->msg_avail_comp);
++
++	/* Send the message to the videocore */
++	success = vchi_msg_queue(instance->vchi_handle[0],
++				 &m, sizeof m,
++				 VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL);
++
++	if (success != 0) {
++		LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n",
++			__func__, success);
++
++		ret = -1;
++		goto unlock;
++	}
++
++	/* We are expecting a reply from the videocore */
++	ret = wait_for_completion_interruptible(&instance->msg_avail_comp);
++	if (ret) {
++		LOG_ERR("%s: failed on waiting for event (status=%d)\n",
++			__func__, success);
++		goto unlock;
++	}
++
++	if (instance->result != 0) {
++		LOG_ERR("%s: result=%d", __func__, instance->result);
++
++		ret = -1;
++		goto unlock;
++	}
++
++	ret = 0;
++
++unlock:
++	vchi_service_release(instance->vchi_handle[0]);
++	mutex_unlock(&instance->vchi_mutex);
++
++	LOG_DBG(" .. OUT\n");
++	return ret;
++}
++
++int bcm2835_audio_setup(bcm2835_alsa_stream_t * alsa_stream)
++{
++	LOG_DBG(" .. IN\n");
++
++	LOG_DBG(" .. OUT\n");
++
++	return 0;
++}
++
++static int bcm2835_audio_start_worker(bcm2835_alsa_stream_t * alsa_stream)
++{
++	VC_AUDIO_MSG_T m;
++	AUDIO_INSTANCE_T *instance = alsa_stream->instance;
++	int32_t success;
++	int ret;
++	LOG_DBG(" .. IN\n");
++
++	if(mutex_lock_interruptible(&instance->vchi_mutex))
++	{
++		LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections);
++		return -EINTR;
++	}
++	vchi_service_use(instance->vchi_handle[0]);
++
++	m.type = VC_AUDIO_MSG_TYPE_START;
++
++	/* Send the message to the videocore */
++	success = vchi_msg_queue(instance->vchi_handle[0],
++				 &m, sizeof m,
++				 VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL);
++
++	if (success != 0) {
++		LOG_ERR("%s: failed on vchi_msg_queue (status=%d)",
++			__func__, success);
++
++		ret = -1;
++		goto unlock;
++	}
++
++	ret = 0;
++
++unlock:
++	vchi_service_release(instance->vchi_handle[0]);
++	mutex_unlock(&instance->vchi_mutex);
++	LOG_DBG(" .. OUT\n");
++	return ret;
++}
++
++static int bcm2835_audio_stop_worker(bcm2835_alsa_stream_t * alsa_stream)
++{
++	VC_AUDIO_MSG_T m;
++	AUDIO_INSTANCE_T *instance = alsa_stream->instance;
++	int32_t success;
++	int ret;
++	LOG_DBG(" .. IN\n");
++
++	if(mutex_lock_interruptible(&instance->vchi_mutex))
++	{
++		LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections);
++		return -EINTR;
++	}
++	vchi_service_use(instance->vchi_handle[0]);
++
++	m.type = VC_AUDIO_MSG_TYPE_STOP;
++	m.u.stop.draining = alsa_stream->draining;
++
++	/* Send the message to the videocore */
++	success = vchi_msg_queue(instance->vchi_handle[0],
++				 &m, sizeof m,
++				 VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL);
++
++	if (success != 0) {
++		LOG_ERR("%s: failed on vchi_msg_queue (status=%d)",
++			__func__, success);
++
++		ret = -1;
++		goto unlock;
++	}
++
++	ret = 0;
++
++unlock:
++	vchi_service_release(instance->vchi_handle[0]);
++	mutex_unlock(&instance->vchi_mutex);
++	LOG_DBG(" .. OUT\n");
++	return ret;
++}
++
++int bcm2835_audio_close(bcm2835_alsa_stream_t * alsa_stream)
++{
++	VC_AUDIO_MSG_T m;
++	AUDIO_INSTANCE_T *instance = alsa_stream->instance;
++	int32_t success;
++	int ret;
++	LOG_DBG(" .. IN\n");
++
++	my_workqueue_quit(alsa_stream);
++
++	if(mutex_lock_interruptible(&instance->vchi_mutex))
++	{
++		LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections);
++		return -EINTR;
++	}
++	vchi_service_use(instance->vchi_handle[0]);
++
++	m.type = VC_AUDIO_MSG_TYPE_CLOSE;
++
++	/* Create the message available completion */
++	init_completion(&instance->msg_avail_comp);
++
++	/* Send the message to the videocore */
++	success = vchi_msg_queue(instance->vchi_handle[0],
++				 &m, sizeof m,
++				 VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL);
++
++	if (success != 0) {
++		LOG_ERR("%s: failed on vchi_msg_queue (status=%d)",
++			__func__, success);
++		ret = -1;
++		goto unlock;
++	}
++
++	ret = wait_for_completion_interruptible(&instance->msg_avail_comp);
++	if (ret) {
++		LOG_ERR("%s: failed on waiting for event (status=%d)",
++			__func__, success);
++		goto unlock;
++	}
++	if (instance->result != 0) {
++		LOG_ERR("%s: failed result (status=%d)",
++			__func__, instance->result);
++
++		ret = -1;
++		goto unlock;
++	}
++
++	ret = 0;
++
++unlock:
++	vchi_service_release(instance->vchi_handle[0]);
++	mutex_unlock(&instance->vchi_mutex);
++
++	/* Stop the audio service */
++	if (instance) {
++		vc_vchi_audio_deinit(instance);
++		alsa_stream->instance = NULL;
++	}
++	LOG_DBG(" .. OUT\n");
++	return ret;
++}
++
++int bcm2835_audio_write_worker(bcm2835_alsa_stream_t *alsa_stream,
++			       uint32_t count, void *src)
++{
++	VC_AUDIO_MSG_T m;
++	AUDIO_INSTANCE_T *instance = alsa_stream->instance;
++	int32_t success;
++	int ret;
++
++	LOG_DBG(" .. IN\n");
++
++	LOG_INFO(" Writing %d bytes from %p\n", count, src);
++
++	if(mutex_lock_interruptible(&instance->vchi_mutex))
++	{
++		LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections);
++		return -EINTR;
++	}
++	vchi_service_use(instance->vchi_handle[0]);
++
++	if ( instance->peer_version==0 && vchi_get_peer_version(instance->vchi_handle[0], &instance->peer_version) == 0 ) {
++		LOG_DBG("%s: client version %d connected\n", __func__, instance->peer_version);
++	}
++	m.type = VC_AUDIO_MSG_TYPE_WRITE;
++	m.u.write.count = count;
++	// old version uses bulk, new version uses control
++	m.u.write.max_packet = instance->peer_version < 2 || force_bulk ? 0:4000;
++	m.u.write.callback = alsa_stream->fifo_irq_handler;
++	m.u.write.cookie = alsa_stream;
++	m.u.write.silence = src == NULL;
++
++	/* Send the message to the videocore */
++	success = vchi_msg_queue(instance->vchi_handle[0],
++				 &m, sizeof m,
++				 VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL);
++
++	if (success != 0) {
++		LOG_ERR("%s: failed on vchi_msg_queue (status=%d)",
++			__func__, success);
++
++		ret = -1;
++		goto unlock;
++	}
++	if (!m.u.write.silence) {
++		if (m.u.write.max_packet == 0) {
++			/* Send the message to the videocore */
++			success = vchi_bulk_queue_transmit(instance->vchi_handle[0],
++							   src, count,
++							   0 *
++							   VCHI_FLAGS_BLOCK_UNTIL_QUEUED
++							   +
++							   1 *
++							   VCHI_FLAGS_BLOCK_UNTIL_DATA_READ,
++							   NULL);
++		} else {
++			while (count > 0) {
++				int bytes = min((int)m.u.write.max_packet, (int)count);
++				success = vchi_msg_queue(instance->vchi_handle[0],
++							 src, bytes,
++							 VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL);
++				src = (char *)src + bytes;
++				count -= bytes;
++			}
++		}
++		if (success != 0) {
++			LOG_ERR
++			    ("%s: failed on vchi_bulk_queue_transmit (status=%d)",
++			     __func__, success);
++
++			ret = -1;
++			goto unlock;
++		}
++	}
++	ret = 0;
++
++unlock:
++	vchi_service_release(instance->vchi_handle[0]);
++	mutex_unlock(&instance->vchi_mutex);
++	LOG_DBG(" .. OUT\n");
++	return ret;
++}
++
++/**
++  * Returns all buffers from arm->vc
++  */
++void bcm2835_audio_flush_buffers(bcm2835_alsa_stream_t * alsa_stream)
++{
++	LOG_DBG(" .. IN\n");
++	LOG_DBG(" .. OUT\n");
++	return;
++}
++
++/**
++  * Forces VC to flush(drop) its filled playback buffers and
++  * return them the us. (VC->ARM)
++  */
++void bcm2835_audio_flush_playback_buffers(bcm2835_alsa_stream_t * alsa_stream)
++{
++	LOG_DBG(" .. IN\n");
++	LOG_DBG(" .. OUT\n");
++}
++
++uint32_t bcm2835_audio_retrieve_buffers(bcm2835_alsa_stream_t * alsa_stream)
++{
++	uint32_t count = atomic_read(&alsa_stream->retrieved);
++	atomic_sub(count, &alsa_stream->retrieved);
++	return count;
++}
++
++module_param(force_bulk, bool, 0444);
++MODULE_PARM_DESC(force_bulk, "Force use of vchiq bulk for audio");
+diff -Nur linux-3.12.6/sound/arm/Kconfig linux-raspberry-pi/sound/arm/Kconfig
+--- linux-3.12.6/sound/arm/Kconfig	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/sound/arm/Kconfig	2013-12-29 10:42:25.000000000 +0100
+@@ -39,5 +39,12 @@
+ 	  Say Y or M if you want to support any AC97 codec attached to
+ 	  the PXA2xx AC97 interface.
+ 
++config SND_BCM2835
++	tristate "BCM2835 ALSA driver"
++	depends on ARCH_BCM2708 && BCM2708_VCHIQ && SND
++	select SND_PCM
++	help
++	  Say Y or M if you want to support BCM2835 Alsa pcm card driver
++
+ endif	# SND_ARM
+ 
+diff -Nur linux-3.12.6/sound/arm/Makefile linux-raspberry-pi/sound/arm/Makefile
+--- linux-3.12.6/sound/arm/Makefile	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/sound/arm/Makefile	2013-12-29 10:42:25.000000000 +0100
+@@ -14,3 +14,8 @@
+ 
+ obj-$(CONFIG_SND_PXA2XX_AC97)	+= snd-pxa2xx-ac97.o
+ snd-pxa2xx-ac97-objs		:= pxa2xx-ac97.o
++
++obj-$(CONFIG_SND_BCM2835)	+= snd-bcm2835.o
++snd-bcm2835-objs		:= bcm2835.o bcm2835-ctl.o bcm2835-pcm.o bcm2835-vchiq.o
++
++EXTRA_CFLAGS += -Idrivers/misc/vc04_services -Idrivers/misc/vc04_services/interface/vcos/linuxkernel -D__VCCOREVER__=0x04000000
+diff -Nur linux-3.12.6/sound/arm/vc_vchi_audioserv_defs.h linux-raspberry-pi/sound/arm/vc_vchi_audioserv_defs.h
+--- linux-3.12.6/sound/arm/vc_vchi_audioserv_defs.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/sound/arm/vc_vchi_audioserv_defs.h	2013-12-29 10:42:25.000000000 +0100
+@@ -0,0 +1,116 @@
++/*****************************************************************************
++* Copyright 2011 Broadcom Corporation.  All rights reserved.
++*
++* Unless you and Broadcom execute a separate written software license
++* agreement governing use of this software, this software is licensed to you
++* under the terms of the GNU General Public License version 2, available at
++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
++*
++* Notwithstanding the above, under no circumstances may you combine this
++* software in any way with any other Broadcom software provided under a
++* license other than the GPL, without Broadcom's express prior written
++* consent.
++*****************************************************************************/
++
++#ifndef _VC_AUDIO_DEFS_H_
++#define _VC_AUDIO_DEFS_H_
++
++#define VC_AUDIOSERV_MIN_VER 1
++#define VC_AUDIOSERV_VER 2
++
++// FourCC code used for VCHI connection
++#define VC_AUDIO_SERVER_NAME  MAKE_FOURCC("AUDS")
++
++// Maximum message length
++#define VC_AUDIO_MAX_MSG_LEN  (sizeof( VC_AUDIO_MSG_T ))
++
++// List of screens that are currently supported
++// All message types supported for HOST->VC direction
++typedef enum {
++	VC_AUDIO_MSG_TYPE_RESULT,	// Generic result
++	VC_AUDIO_MSG_TYPE_COMPLETE,	// Generic result
++	VC_AUDIO_MSG_TYPE_CONFIG,	// Configure audio
++	VC_AUDIO_MSG_TYPE_CONTROL,	// Configure audio
++	VC_AUDIO_MSG_TYPE_OPEN,	// Configure audio
++	VC_AUDIO_MSG_TYPE_CLOSE,	// Configure audio
++	VC_AUDIO_MSG_TYPE_START,	// Configure audio
++	VC_AUDIO_MSG_TYPE_STOP,	// Configure audio
++	VC_AUDIO_MSG_TYPE_WRITE,	// Configure audio
++	VC_AUDIO_MSG_TYPE_MAX
++} VC_AUDIO_MSG_TYPE;
++
++// configure the audio
++typedef struct {
++	uint32_t channels;
++	uint32_t samplerate;
++	uint32_t bps;
++
++} VC_AUDIO_CONFIG_T;
++
++typedef struct {
++	uint32_t volume;
++	uint32_t dest;
++
++} VC_AUDIO_CONTROL_T;
++
++// audio
++typedef struct {
++	uint32_t dummy;
++
++} VC_AUDIO_OPEN_T;
++
++// audio
++typedef struct {
++	uint32_t dummy;
++
++} VC_AUDIO_CLOSE_T;
++// audio
++typedef struct {
++	uint32_t dummy;
++
++} VC_AUDIO_START_T;
++// audio
++typedef struct {
++	uint32_t draining;
++
++} VC_AUDIO_STOP_T;
++
++// configure the write audio samples
++typedef struct {
++	uint32_t count;		// in bytes
++	void *callback;
++	void *cookie;
++	uint16_t silence;
++	uint16_t max_packet;
++} VC_AUDIO_WRITE_T;
++
++// Generic result for a request (VC->HOST)
++typedef struct {
++	int32_t success;	// Success value
++
++} VC_AUDIO_RESULT_T;
++
++// Generic result for a request (VC->HOST)
++typedef struct {
++	int32_t count;		// Success value
++	void *callback;
++	void *cookie;
++} VC_AUDIO_COMPLETE_T;
++
++// Message header for all messages in HOST->VC direction
++typedef struct {
++	int32_t type;		// Message type (VC_AUDIO_MSG_TYPE)
++	union {
++		VC_AUDIO_CONFIG_T config;
++		VC_AUDIO_CONTROL_T control;
++		VC_AUDIO_OPEN_T open;
++		VC_AUDIO_CLOSE_T close;
++		VC_AUDIO_START_T start;
++		VC_AUDIO_STOP_T stop;
++		VC_AUDIO_WRITE_T write;
++		VC_AUDIO_RESULT_T result;
++		VC_AUDIO_COMPLETE_T complete;
++	} u;
++} VC_AUDIO_MSG_T;
++
++#endif // _VC_AUDIO_DEFS_H_
+diff -Nur linux-3.12.6/sound/soc/bcm/bcm2708-i2s.c linux-raspberry-pi/sound/soc/bcm/bcm2708-i2s.c
+--- linux-3.12.6/sound/soc/bcm/bcm2708-i2s.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/sound/soc/bcm/bcm2708-i2s.c	2013-12-29 10:42:25.000000000 +0100
+@@ -0,0 +1,945 @@
++/*
++ * ALSA SoC I2S Audio Layer for Broadcom BCM2708 SoC
++ *
++ * Author:	Florian Meier <florian.meier@koalo.de>
++ *		Copyright 2013
++ *
++ * Based on
++ *	Raspberry Pi PCM I2S ALSA Driver
++ *	Copyright (c) by Phil Poole 2013
++ *
++ *	ALSA SoC I2S (McBSP) Audio Layer for TI DAVINCI processor
++ *      Vladimir Barinov, <vbarinov@embeddedalley.com>
++ *	Copyright (C) 2007 MontaVista Software, Inc., <source@mvista.com>
++ *
++ *	OMAP ALSA SoC DAI driver using McBSP port
++ *	Copyright (C) 2008 Nokia Corporation
++ *	Contact: Jarkko Nikula <jarkko.nikula@bitmer.com>
++ *		 Peter Ujfalusi <peter.ujfalusi@ti.com>
++ *
++ *	Freescale SSI ALSA SoC Digital Audio Interface (DAI) driver
++ *	Author: Timur Tabi <timur@freescale.com>
++ *	Copyright 2007-2010 Freescale Semiconductor, Inc.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/slab.h>
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/clk.h>
++
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/initval.h>
++#include <sound/soc.h>
++#include <sound/dmaengine_pcm.h>
++
++/* Clock registers */
++#define BCM2708_CLK_PCMCTL_REG  0x00
++#define BCM2708_CLK_PCMDIV_REG  0x04
++
++/* Clock register settings */
++#define BCM2708_CLK_PASSWD		(0x5a000000)
++#define BCM2708_CLK_PASSWD_MASK	(0xff000000)
++#define BCM2708_CLK_MASH(v)		((v) << 9)
++#define BCM2708_CLK_FLIP		BIT(8)
++#define BCM2708_CLK_BUSY		BIT(7)
++#define BCM2708_CLK_KILL		BIT(5)
++#define BCM2708_CLK_ENAB		BIT(4)
++#define BCM2708_CLK_SRC(v)		(v)
++
++#define BCM2708_CLK_SHIFT		(12)
++#define BCM2708_CLK_DIVI(v)		((v) << BCM2708_CLK_SHIFT)
++#define BCM2708_CLK_DIVF(v)		(v)
++#define BCM2708_CLK_DIVF_MASK		(0xFFF)
++
++enum {
++	BCM2708_CLK_MASH_0 = 0,
++	BCM2708_CLK_MASH_1,
++	BCM2708_CLK_MASH_2,
++	BCM2708_CLK_MASH_3,
++};
++
++enum {
++	BCM2708_CLK_SRC_GND = 0,
++	BCM2708_CLK_SRC_OSC,
++	BCM2708_CLK_SRC_DBG0,
++	BCM2708_CLK_SRC_DBG1,
++	BCM2708_CLK_SRC_PLLA,
++	BCM2708_CLK_SRC_PLLC,
++	BCM2708_CLK_SRC_PLLD,
++	BCM2708_CLK_SRC_HDMI,
++};
++
++/* Most clocks are not useable (freq = 0) */
++static const unsigned int bcm2708_clk_freq[BCM2708_CLK_SRC_HDMI+1] = {
++	[BCM2708_CLK_SRC_GND]		= 0,
++	[BCM2708_CLK_SRC_OSC]		= 19200000,
++	[BCM2708_CLK_SRC_DBG0]		= 0,
++	[BCM2708_CLK_SRC_DBG1]		= 0,
++	[BCM2708_CLK_SRC_PLLA]		= 0,
++	[BCM2708_CLK_SRC_PLLC]		= 0,
++	[BCM2708_CLK_SRC_PLLD]		= 500000000,
++	[BCM2708_CLK_SRC_HDMI]		= 0,
++};
++
++/* I2S registers */
++#define BCM2708_I2S_CS_A_REG		0x00
++#define BCM2708_I2S_FIFO_A_REG		0x04
++#define BCM2708_I2S_MODE_A_REG		0x08
++#define BCM2708_I2S_RXC_A_REG		0x0c
++#define BCM2708_I2S_TXC_A_REG		0x10
++#define BCM2708_I2S_DREQ_A_REG		0x14
++#define BCM2708_I2S_INTEN_A_REG	0x18
++#define BCM2708_I2S_INTSTC_A_REG	0x1c
++#define BCM2708_I2S_GRAY_REG		0x20
++
++/* I2S register settings */
++#define BCM2708_I2S_STBY		BIT(25)
++#define BCM2708_I2S_SYNC		BIT(24)
++#define BCM2708_I2S_RXSEX		BIT(23)
++#define BCM2708_I2S_RXF		BIT(22)
++#define BCM2708_I2S_TXE		BIT(21)
++#define BCM2708_I2S_RXD		BIT(20)
++#define BCM2708_I2S_TXD		BIT(19)
++#define BCM2708_I2S_RXR		BIT(18)
++#define BCM2708_I2S_TXW		BIT(17)
++#define BCM2708_I2S_CS_RXERR		BIT(16)
++#define BCM2708_I2S_CS_TXERR		BIT(15)
++#define BCM2708_I2S_RXSYNC		BIT(14)
++#define BCM2708_I2S_TXSYNC		BIT(13)
++#define BCM2708_I2S_DMAEN		BIT(9)
++#define BCM2708_I2S_RXTHR(v)		((v) << 7)
++#define BCM2708_I2S_TXTHR(v)		((v) << 5)
++#define BCM2708_I2S_RXCLR		BIT(4)
++#define BCM2708_I2S_TXCLR		BIT(3)
++#define BCM2708_I2S_TXON		BIT(2)
++#define BCM2708_I2S_RXON		BIT(1)
++#define BCM2708_I2S_EN			(1)
++
++#define BCM2708_I2S_CLKDIS		BIT(28)
++#define BCM2708_I2S_PDMN		BIT(27)
++#define BCM2708_I2S_PDME		BIT(26)
++#define BCM2708_I2S_FRXP		BIT(25)
++#define BCM2708_I2S_FTXP		BIT(24)
++#define BCM2708_I2S_CLKM		BIT(23)
++#define BCM2708_I2S_CLKI		BIT(22)
++#define BCM2708_I2S_FSM		BIT(21)
++#define BCM2708_I2S_FSI		BIT(20)
++#define BCM2708_I2S_FLEN(v)		((v) << 10)
++#define BCM2708_I2S_FSLEN(v)		(v)
++
++#define BCM2708_I2S_CHWEX		BIT(15)
++#define BCM2708_I2S_CHEN		BIT(14)
++#define BCM2708_I2S_CHPOS(v)		((v) << 4)
++#define BCM2708_I2S_CHWID(v)		(v)
++#define BCM2708_I2S_CH1(v)		((v) << 16)
++#define BCM2708_I2S_CH2(v)		(v)
++
++#define BCM2708_I2S_TX_PANIC(v)	((v) << 24)
++#define BCM2708_I2S_RX_PANIC(v)	((v) << 16)
++#define BCM2708_I2S_TX(v)		((v) << 8)
++#define BCM2708_I2S_RX(v)		(v)
++
++#define BCM2708_I2S_INT_RXERR		BIT(3)
++#define BCM2708_I2S_INT_TXERR		BIT(2)
++#define BCM2708_I2S_INT_RXR		BIT(1)
++#define BCM2708_I2S_INT_TXW		BIT(0)
++
++/* I2S DMA interface */
++#define BCM2708_I2S_FIFO_PHYSICAL_ADDR	0x7E203004
++#define BCM2708_DMA_DREQ_PCM_TX		2
++#define BCM2708_DMA_DREQ_PCM_RX		3
++
++/* General device struct */
++struct bcm2708_i2s_dev {
++	struct device				*dev;
++	struct snd_dmaengine_dai_dma_data	dma_data[2];
++	unsigned int				fmt;
++	unsigned int				bclk_ratio;
++
++	struct regmap *i2s_regmap;
++	struct regmap *clk_regmap;
++};
++
++static void bcm2708_i2s_start_clock(struct bcm2708_i2s_dev *dev)
++{
++	/* Start the clock if in master mode */
++	unsigned int master = dev->fmt & SND_SOC_DAIFMT_MASTER_MASK;
++
++	switch (master) {
++	case SND_SOC_DAIFMT_CBS_CFS:
++	case SND_SOC_DAIFMT_CBS_CFM:
++		regmap_update_bits(dev->clk_regmap, BCM2708_CLK_PCMCTL_REG,
++			BCM2708_CLK_PASSWD_MASK | BCM2708_CLK_ENAB,
++			BCM2708_CLK_PASSWD | BCM2708_CLK_ENAB);
++		break;
++	default:
++		break;
++	}
++}
++
++static void bcm2708_i2s_stop_clock(struct bcm2708_i2s_dev *dev)
++{
++	uint32_t clkreg;
++	int timeout = 1000;
++
++	/* Stop clock */
++	regmap_update_bits(dev->clk_regmap, BCM2708_CLK_PCMCTL_REG,
++			BCM2708_CLK_PASSWD_MASK | BCM2708_CLK_ENAB,
++			BCM2708_CLK_PASSWD);
++
++	/* Wait for the BUSY flag going down */
++	while (--timeout) {
++		regmap_read(dev->clk_regmap, BCM2708_CLK_PCMCTL_REG, &clkreg);
++		if (!(clkreg & BCM2708_CLK_BUSY))
++			break;
++	}
++
++	if (!timeout) {
++		/* KILL the clock */
++		dev_err(dev->dev, "I2S clock didn't stop. Kill the clock!\n");
++		regmap_update_bits(dev->clk_regmap, BCM2708_CLK_PCMCTL_REG,
++			BCM2708_CLK_KILL | BCM2708_CLK_PASSWD_MASK,
++			BCM2708_CLK_KILL | BCM2708_CLK_PASSWD);
++	}
++}
++
++static void bcm2708_i2s_clear_fifos(struct bcm2708_i2s_dev *dev,
++				    bool tx, bool rx)
++{
++	int timeout = 1000;
++	uint32_t syncval;
++	uint32_t csreg;
++	uint32_t i2s_active_state;
++	uint32_t clkreg;
++	uint32_t clk_active_state;
++	uint32_t off;
++	uint32_t clr;
++
++	off =  tx ? BCM2708_I2S_TXON : 0;
++	off |= rx ? BCM2708_I2S_RXON : 0;
++
++	clr =  tx ? BCM2708_I2S_TXCLR : 0;
++	clr |= rx ? BCM2708_I2S_RXCLR : 0;
++
++	/* Backup the current state */
++	regmap_read(dev->i2s_regmap, BCM2708_I2S_CS_A_REG, &csreg);
++	i2s_active_state = csreg & (BCM2708_I2S_RXON | BCM2708_I2S_TXON);
++
++	regmap_read(dev->clk_regmap, BCM2708_CLK_PCMCTL_REG, &clkreg);
++	clk_active_state = clkreg & BCM2708_CLK_ENAB;
++
++	/* Start clock if not running */
++	if (!clk_active_state) {
++		regmap_update_bits(dev->clk_regmap, BCM2708_CLK_PCMCTL_REG,
++			BCM2708_CLK_PASSWD_MASK | BCM2708_CLK_ENAB,
++			BCM2708_CLK_PASSWD | BCM2708_CLK_ENAB);
++	}
++
++	/* Stop I2S module */
++	regmap_update_bits(dev->i2s_regmap, BCM2708_I2S_CS_A_REG, off, 0);
++
++	/*
++	 * Clear the FIFOs
++	 * Requires at least 2 PCM clock cycles to take effect
++	 */
++	regmap_update_bits(dev->i2s_regmap, BCM2708_I2S_CS_A_REG, clr, clr);
++
++	/* Wait for 2 PCM clock cycles */
++
++	/*
++	 * Toggle the SYNC flag. After 2 PCM clock cycles it can be read back
++	 * FIXME: This does not seem to work for slave mode!
++	 */
++	regmap_read(dev->i2s_regmap, BCM2708_I2S_CS_A_REG, &syncval);
++	syncval &= BCM2708_I2S_SYNC;
++
++	regmap_update_bits(dev->i2s_regmap, BCM2708_I2S_CS_A_REG,
++			BCM2708_I2S_SYNC, ~syncval);
++
++	/* Wait for the SYNC flag changing it's state */
++	while (--timeout) {
++		regmap_read(dev->i2s_regmap, BCM2708_I2S_CS_A_REG, &csreg);
++		if ((csreg & BCM2708_I2S_SYNC) != syncval)
++			break;
++	}
++
++	if (!timeout)
++		dev_err(dev->dev, "I2S SYNC error!\n");
++
++	/* Stop clock if it was not running before */
++	if (!clk_active_state)
++		bcm2708_i2s_stop_clock(dev);
++
++	/* Restore I2S state */
++	regmap_update_bits(dev->i2s_regmap, BCM2708_I2S_CS_A_REG,
++			BCM2708_I2S_RXON | BCM2708_I2S_TXON, i2s_active_state);
++}
++
++static int bcm2708_i2s_set_dai_fmt(struct snd_soc_dai *dai,
++				      unsigned int fmt)
++{
++	struct bcm2708_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
++	dev->fmt = fmt;
++	return 0;
++}
++
++static int bcm2708_i2s_set_dai_bclk_ratio(struct snd_soc_dai *dai,
++				      unsigned int ratio)
++{
++	struct bcm2708_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
++	dev->bclk_ratio = ratio;
++	return 0;
++}
++
++static int bcm2708_i2s_hw_params(struct snd_pcm_substream *substream,
++				 struct snd_pcm_hw_params *params,
++				 struct snd_soc_dai *dai)
++{
++	struct bcm2708_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
++
++	unsigned int sampling_rate = params_rate(params);
++	unsigned int data_length, data_delay, bclk_ratio;
++	unsigned int ch1pos, ch2pos, mode, format;
++	unsigned int mash = BCM2708_CLK_MASH_1;
++	unsigned int divi, divf, target_frequency;
++	int clk_src = -1;
++	unsigned int master = dev->fmt & SND_SOC_DAIFMT_MASTER_MASK;
++	bool bit_master =	(master == SND_SOC_DAIFMT_CBS_CFS
++					|| master == SND_SOC_DAIFMT_CBS_CFM);
++
++	bool frame_master =	(master == SND_SOC_DAIFMT_CBS_CFS
++					|| master == SND_SOC_DAIFMT_CBM_CFS);
++	uint32_t csreg;
++
++	/*
++	 * If a stream is already enabled,
++	 * the registers are already set properly.
++	 */
++	regmap_read(dev->i2s_regmap, BCM2708_I2S_CS_A_REG, &csreg);
++
++	if (csreg & (BCM2708_I2S_TXON | BCM2708_I2S_RXON))
++		return 0;
++
++	/*
++	 * Adjust the data length according to the format.
++	 * We prefill the half frame length with an integer
++	 * divider of 2400 as explained at the clock settings.
++	 * Maybe it is overwritten there, if the Integer mode
++	 * does not apply.
++	 */
++	switch (params_format(params)) {
++	case SNDRV_PCM_FORMAT_S16_LE:
++		data_length = 16;
++		bclk_ratio = 40;
++		break;
++	case SNDRV_PCM_FORMAT_S24_LE:
++		data_length = 24;
++		bclk_ratio = 40;
++		break;
++	case SNDRV_PCM_FORMAT_S32_LE:
++		data_length = 32;
++		bclk_ratio = 80;
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	/* If bclk_ratio already set, use that one. */
++	if (dev->bclk_ratio)
++		bclk_ratio = dev->bclk_ratio;
++
++	/*
++	 * Clock Settings
++	 *
++	 * The target frequency of the bit clock is
++	 *	sampling rate * frame length
++	 *
++	 * Integer mode:
++	 * Sampling rates that are multiples of 8000 kHz
++	 * can be driven by the oscillator of 19.2 MHz
++	 * with an integer divider as long as the frame length
++	 * is an integer divider of 19200000/8000=2400 as set up above.
++	 * This is no longer possible if the sampling rate
++	 * is too high (e.g. 192 kHz), because the oscillator is too slow.
++	 *
++	 * MASH mode:
++	 * For all other sampling rates, it is not possible to
++	 * have an integer divider. Approximate the clock
++	 * with the MASH module that induces a slight frequency
++	 * variance. To minimize that it is best to have the fastest
++	 * clock here. That is PLLD with 500 MHz.
++	 */
++	target_frequency = sampling_rate * bclk_ratio;
++	clk_src = BCM2708_CLK_SRC_OSC;
++	mash = BCM2708_CLK_MASH_0;
++
++	if (bcm2708_clk_freq[clk_src] % target_frequency == 0
++			&& bit_master && frame_master) {
++		divi = bcm2708_clk_freq[clk_src] / target_frequency;
++		divf = 0;
++	} else {
++		uint64_t dividend;
++
++		if (!dev->bclk_ratio) {
++			/*
++			 * Overwrite bclk_ratio, because the
++			 * above trick is not needed or can
++			 * not be used.
++			 */
++			bclk_ratio = 2 * data_length;
++		}
++
++		target_frequency = sampling_rate * bclk_ratio;
++
++		clk_src = BCM2708_CLK_SRC_PLLD;
++		mash = BCM2708_CLK_MASH_1;
++
++		dividend = bcm2708_clk_freq[clk_src];
++		dividend <<= BCM2708_CLK_SHIFT;
++		do_div(dividend, target_frequency);
++		divi = dividend >> BCM2708_CLK_SHIFT;
++		divf = dividend & BCM2708_CLK_DIVF_MASK;
++	}
++
++	/* Set clock divider */
++	regmap_write(dev->clk_regmap, BCM2708_CLK_PCMDIV_REG, BCM2708_CLK_PASSWD
++			| BCM2708_CLK_DIVI(divi)
++			| BCM2708_CLK_DIVF(divf));
++
++	/* Setup clock, but don't start it yet */
++	regmap_write(dev->clk_regmap, BCM2708_CLK_PCMCTL_REG, BCM2708_CLK_PASSWD
++			| BCM2708_CLK_MASH(mash)
++			| BCM2708_CLK_SRC(clk_src));
++
++	/* Setup the frame format */
++	format = BCM2708_I2S_CHEN;
++
++	if (data_length >= 24)
++		format |= BCM2708_I2S_CHWEX;
++
++	format |= BCM2708_I2S_CHWID((data_length-8)&0xf);
++
++	switch (dev->fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
++	case SND_SOC_DAIFMT_I2S:
++		data_delay = 1;
++		break;
++	default:
++		/*
++		 * TODO
++		 * Others are possible but are not implemented at the moment.
++		 */
++		dev_err(dev->dev, "%s:bad format\n", __func__);
++		return -EINVAL;
++	}
++
++	ch1pos = data_delay;
++	ch2pos = bclk_ratio / 2 + data_delay;
++
++	switch (params_channels(params)) {
++	case 2:
++		format = BCM2708_I2S_CH1(format) | BCM2708_I2S_CH2(format);
++		format |= BCM2708_I2S_CH1(BCM2708_I2S_CHPOS(ch1pos));
++		format |= BCM2708_I2S_CH2(BCM2708_I2S_CHPOS(ch2pos));
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	/*
++	 * Set format for both streams.
++	 * We cannot set another frame length
++	 * (and therefore word length) anyway,
++	 * so the format will be the same.
++	 */
++	regmap_write(dev->i2s_regmap, BCM2708_I2S_RXC_A_REG, format);
++	regmap_write(dev->i2s_regmap, BCM2708_I2S_TXC_A_REG, format);
++
++	/* Setup the I2S mode */
++	mode = 0;
++
++	if (data_length <= 16) {
++		/*
++		 * Use frame packed mode (2 channels per 32 bit word)
++		 * We cannot set another frame length in the second stream
++		 * (and therefore word length) anyway,
++		 * so the format will be the same.
++		 */
++		mode |= BCM2708_I2S_FTXP | BCM2708_I2S_FRXP;
++	}
++
++	mode |= BCM2708_I2S_FLEN(bclk_ratio - 1);
++	mode |= BCM2708_I2S_FSLEN(bclk_ratio / 2);
++
++	/* Master or slave? */
++	switch (dev->fmt & SND_SOC_DAIFMT_MASTER_MASK) {
++	case SND_SOC_DAIFMT_CBS_CFS:
++		/* CPU is master */
++		break;
++	case SND_SOC_DAIFMT_CBM_CFS:
++		/*
++		 * CODEC is bit clock master
++		 * CPU is frame master
++		 */
++		mode |= BCM2708_I2S_CLKM;
++		break;
++	case SND_SOC_DAIFMT_CBS_CFM:
++		/*
++		 * CODEC is frame master
++		 * CPU is bit clock master
++		 */
++		mode |= BCM2708_I2S_FSM;
++		break;
++	case SND_SOC_DAIFMT_CBM_CFM:
++		/* CODEC is master */
++		mode |= BCM2708_I2S_CLKM;
++		mode |= BCM2708_I2S_FSM;
++		break;
++	default:
++		dev_err(dev->dev, "%s:bad master\n", __func__);
++		return -EINVAL;
++	}
++
++	/*
++	 * Invert clocks?
++	 *
++	 * The BCM approach seems to be inverted to the classical I2S approach.
++	 */
++	switch (dev->fmt & SND_SOC_DAIFMT_INV_MASK) {
++	case SND_SOC_DAIFMT_NB_NF:
++		/* None. Therefore, both for BCM */
++		mode |= BCM2708_I2S_CLKI;
++		mode |= BCM2708_I2S_FSI;
++		break;
++	case SND_SOC_DAIFMT_IB_IF:
++		/* Both. Therefore, none for BCM */
++		break;
++	case SND_SOC_DAIFMT_NB_IF:
++		/*
++		 * Invert only frame sync. Therefore,
++		 * invert only bit clock for BCM
++		 */
++		mode |= BCM2708_I2S_CLKI;
++		break;
++	case SND_SOC_DAIFMT_IB_NF:
++		/*
++		 * Invert only bit clock. Therefore,
++		 * invert only frame sync for BCM
++		 */
++		mode |= BCM2708_I2S_FSI;
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	regmap_write(dev->i2s_regmap, BCM2708_I2S_MODE_A_REG, mode);
++
++	/* Setup the DMA parameters */
++	regmap_update_bits(dev->i2s_regmap, BCM2708_I2S_CS_A_REG,
++			BCM2708_I2S_RXTHR(1)
++			| BCM2708_I2S_TXTHR(1)
++			| BCM2708_I2S_DMAEN, 0xffffffff);
++
++	regmap_update_bits(dev->i2s_regmap, BCM2708_I2S_DREQ_A_REG,
++			  BCM2708_I2S_TX_PANIC(0x10)
++			| BCM2708_I2S_RX_PANIC(0x30)
++			| BCM2708_I2S_TX(0x30)
++			| BCM2708_I2S_RX(0x20), 0xffffffff);
++
++	/* Clear FIFOs */
++	bcm2708_i2s_clear_fifos(dev, true, true);
++
++	return 0;
++}
++
++static int bcm2708_i2s_prepare(struct snd_pcm_substream *substream,
++		struct snd_soc_dai *dai)
++{
++	struct bcm2708_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
++	uint32_t cs_reg;
++
++	bcm2708_i2s_start_clock(dev);
++
++	/*
++	 * Clear both FIFOs if the one that should be started
++	 * is not empty at the moment. This should only happen
++	 * after overrun. Otherwise, hw_params would have cleared
++	 * the FIFO.
++	 */
++	regmap_read(dev->i2s_regmap, BCM2708_I2S_CS_A_REG, &cs_reg);
++
++	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK
++			&& !(cs_reg & BCM2708_I2S_TXE))
++		bcm2708_i2s_clear_fifos(dev, true, false);
++	else if (substream->stream == SNDRV_PCM_STREAM_CAPTURE
++			&& (cs_reg & BCM2708_I2S_RXD))
++		bcm2708_i2s_clear_fifos(dev, false, true);
++
++	return 0;
++}
++
++static void bcm2708_i2s_stop(struct bcm2708_i2s_dev *dev,
++		struct snd_pcm_substream *substream,
++		struct snd_soc_dai *dai)
++{
++	uint32_t mask;
++
++	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
++		mask = BCM2708_I2S_RXON;
++	else
++		mask = BCM2708_I2S_TXON;
++
++	regmap_update_bits(dev->i2s_regmap,
++			BCM2708_I2S_CS_A_REG, mask, 0);
++
++	/* Stop also the clock when not SND_SOC_DAIFMT_CONT */
++	if (!dai->active && !(dev->fmt & SND_SOC_DAIFMT_CONT))
++		bcm2708_i2s_stop_clock(dev);
++}
++
++static int bcm2708_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
++			       struct snd_soc_dai *dai)
++{
++	struct bcm2708_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
++	uint32_t mask;
++
++	switch (cmd) {
++	case SNDRV_PCM_TRIGGER_START:
++	case SNDRV_PCM_TRIGGER_RESUME:
++	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
++		bcm2708_i2s_start_clock(dev);
++
++		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
++			mask = BCM2708_I2S_RXON;
++		else
++			mask = BCM2708_I2S_TXON;
++
++		regmap_update_bits(dev->i2s_regmap,
++				BCM2708_I2S_CS_A_REG, mask, mask);
++		break;
++
++	case SNDRV_PCM_TRIGGER_STOP:
++	case SNDRV_PCM_TRIGGER_SUSPEND:
++	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
++		bcm2708_i2s_stop(dev, substream, dai);
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++static int bcm2708_i2s_startup(struct snd_pcm_substream *substream,
++			       struct snd_soc_dai *dai)
++{
++	struct bcm2708_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
++
++	if (dai->active)
++		return 0;
++
++	/* Should this still be running stop it */
++	bcm2708_i2s_stop_clock(dev);
++
++	/* Enable PCM block */
++	regmap_update_bits(dev->i2s_regmap, BCM2708_I2S_CS_A_REG,
++			BCM2708_I2S_EN, BCM2708_I2S_EN);
++
++	/*
++	 * Disable STBY.
++	 * Requires at least 4 PCM clock cycles to take effect.
++	 */
++	regmap_update_bits(dev->i2s_regmap, BCM2708_I2S_CS_A_REG,
++			BCM2708_I2S_STBY, BCM2708_I2S_STBY);
++
++	return 0;
++}
++
++static void bcm2708_i2s_shutdown(struct snd_pcm_substream *substream,
++		struct snd_soc_dai *dai)
++{
++	struct bcm2708_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
++
++	bcm2708_i2s_stop(dev, substream, dai);
++
++	/* If both streams are stopped, disable module and clock */
++	if (dai->active)
++		return;
++
++	/* Disable the module */
++	regmap_update_bits(dev->i2s_regmap, BCM2708_I2S_CS_A_REG,
++			BCM2708_I2S_EN, 0);
++
++	/*
++	 * Stopping clock is necessary, because stop does
++	 * not stop the clock when SND_SOC_DAIFMT_CONT
++	 */
++	bcm2708_i2s_stop_clock(dev);
++}
++
++static const struct snd_soc_dai_ops bcm2708_i2s_dai_ops = {
++	.startup	= bcm2708_i2s_startup,
++	.shutdown	= bcm2708_i2s_shutdown,
++	.prepare	= bcm2708_i2s_prepare,
++	.trigger	= bcm2708_i2s_trigger,
++	.hw_params	= bcm2708_i2s_hw_params,
++	.set_fmt	= bcm2708_i2s_set_dai_fmt,
++	.set_bclk_ratio	= bcm2708_i2s_set_dai_bclk_ratio
++};
++
++static int bcm2708_i2s_dai_probe(struct snd_soc_dai *dai)
++{
++	struct bcm2708_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
++
++	dai->playback_dma_data = &dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK];
++	dai->capture_dma_data = &dev->dma_data[SNDRV_PCM_STREAM_CAPTURE];
++
++	return 0;
++}
++
++static struct snd_soc_dai_driver bcm2708_i2s_dai = {
++	.name	= "bcm2708-i2s",
++	.probe	= bcm2708_i2s_dai_probe,
++	.playback = {
++		.channels_min = 2,
++		.channels_max = 2,
++		.rates =	SNDRV_PCM_RATE_8000_192000,
++		.formats =	SNDRV_PCM_FMTBIT_S16_LE
++				| SNDRV_PCM_FMTBIT_S24_LE
++				| SNDRV_PCM_FMTBIT_S32_LE
++		},
++	.capture = {
++		.channels_min = 2,
++		.channels_max = 2,
++		.rates =	SNDRV_PCM_RATE_8000_192000,
++		.formats =	SNDRV_PCM_FMTBIT_S16_LE
++				| SNDRV_PCM_FMTBIT_S24_LE
++				| SNDRV_PCM_FMTBIT_S32_LE
++		},
++	.ops = &bcm2708_i2s_dai_ops,
++	.symmetric_rates = 1
++};
++
++static bool bcm2708_i2s_volatile_reg(struct device *dev, unsigned int reg)
++{
++	switch (reg) {
++	case BCM2708_I2S_CS_A_REG:
++	case BCM2708_I2S_FIFO_A_REG:
++	case BCM2708_I2S_INTSTC_A_REG:
++	case BCM2708_I2S_GRAY_REG:
++		return true;
++	default:
++		return false;
++	};
++}
++
++static bool bcm2708_i2s_precious_reg(struct device *dev, unsigned int reg)
++{
++	switch (reg) {
++	case BCM2708_I2S_FIFO_A_REG:
++		return true;
++	default:
++		return false;
++	};
++}
++
++static bool bcm2708_clk_volatile_reg(struct device *dev, unsigned int reg)
++{
++	switch (reg) {
++	case BCM2708_CLK_PCMCTL_REG:
++		return true;
++	default:
++		return false;
++	};
++}
++
++static const struct regmap_config bcm2708_regmap_config[] = {
++	{
++		.reg_bits = 32,
++		.reg_stride = 4,
++		.val_bits = 32,
++		.max_register = BCM2708_I2S_GRAY_REG,
++		.precious_reg = bcm2708_i2s_precious_reg,
++		.volatile_reg = bcm2708_i2s_volatile_reg,
++		.cache_type = REGCACHE_RBTREE,
++	},
++	{
++		.reg_bits = 32,
++		.reg_stride = 4,
++		.val_bits = 32,
++		.max_register = BCM2708_CLK_PCMDIV_REG,
++		.volatile_reg = bcm2708_clk_volatile_reg,
++		.cache_type = REGCACHE_RBTREE,
++	},
++};
++
++static const struct snd_soc_component_driver bcm2708_i2s_component = {
++	.name		= "bcm2708-i2s-comp",
++};
++
++
++static void bcm2708_i2s_setup_gpio(void)
++{
++	/*
++	 * This is the common way to handle the GPIO pins for
++	 * the Raspberry Pi.
++	 * TODO Better way would be to handle
++	 * this in the device tree!
++	 */
++#define INP_GPIO(g) *(gpio+((g)/10)) &= ~(7<<(((g)%10)*3))
++#define SET_GPIO_ALT(g,a) *(gpio+(((g)/10))) |= (((a)<=3?(a)+4:(a)==4?3:2)<<(((g)%10)*3))
++
++	unsigned int *gpio;
++	int pin;
++	gpio = ioremap(GPIO_BASE, SZ_16K);
++
++	/* SPI is on GPIO 7..11 */
++	for (pin = 28; pin <= 31; pin++) {
++		INP_GPIO(pin);		/* set mode to GPIO input first */
++		SET_GPIO_ALT(pin, 2);	/* set mode to ALT 0 */
++	}
++#undef INP_GPIO
++#undef SET_GPIO_ALT
++}
++
++static const struct snd_pcm_hardware bcm2708_pcm_hardware = {
++	.info			= SNDRV_PCM_INFO_INTERLEAVED |
++				  SNDRV_PCM_INFO_JOINT_DUPLEX,
++	.formats		= SNDRV_PCM_FMTBIT_S16_LE |
++				  SNDRV_PCM_FMTBIT_S24_LE |
++				  SNDRV_PCM_FMTBIT_S32_LE,
++	.period_bytes_min	= 32,
++	.period_bytes_max	= 64 * PAGE_SIZE,
++	.periods_min		= 2,
++	.periods_max		= 255,
++	.buffer_bytes_max	= 128 * PAGE_SIZE,
++};
++
++static const struct snd_dmaengine_pcm_config bcm2708_dmaengine_pcm_config = {
++	.prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
++	.pcm_hardware = &bcm2708_pcm_hardware,
++	.prealloc_buffer_size = 256 * PAGE_SIZE,
++};
++
++
++static int bcm2708_i2s_probe(struct platform_device *pdev)
++{
++	struct bcm2708_i2s_dev *dev;
++	int i;
++	int ret;
++	struct regmap *regmap[2];
++	struct resource *mem[2];
++
++	/* Request both ioareas */
++	for (i = 0; i <= 1; i++) {
++		void __iomem *base;
++
++		mem[i] = platform_get_resource(pdev, IORESOURCE_MEM, i);
++		base = devm_ioremap_resource(&pdev->dev, mem[i]);
++		if (IS_ERR(base))
++			return PTR_ERR(base);
++
++		regmap[i] = devm_regmap_init_mmio(&pdev->dev, base,
++					    &bcm2708_regmap_config[i]);
++		if (IS_ERR(regmap[i])) {
++			dev_err(&pdev->dev, "I2S probe: regmap init failed\n");
++			return PTR_ERR(regmap[i]);
++		}
++	}
++
++	dev = devm_kzalloc(&pdev->dev, sizeof(*dev),
++			   GFP_KERNEL);
++	if (IS_ERR(dev))
++		return PTR_ERR(dev);
++
++	bcm2708_i2s_setup_gpio();
++
++	dev->i2s_regmap = regmap[0];
++	dev->clk_regmap = regmap[1];
++
++	/* Set the DMA address */
++	dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK].addr =
++		(dma_addr_t)BCM2708_I2S_FIFO_PHYSICAL_ADDR;
++
++	dev->dma_data[SNDRV_PCM_STREAM_CAPTURE].addr =
++		(dma_addr_t)BCM2708_I2S_FIFO_PHYSICAL_ADDR;
++
++	/* Set the DREQ */
++	dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK].slave_id =
++		BCM2708_DMA_DREQ_PCM_TX;
++	dev->dma_data[SNDRV_PCM_STREAM_CAPTURE].slave_id =
++		BCM2708_DMA_DREQ_PCM_RX;
++
++	/* Set the bus width */
++	dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK].addr_width =
++		DMA_SLAVE_BUSWIDTH_4_BYTES;
++	dev->dma_data[SNDRV_PCM_STREAM_CAPTURE].addr_width =
++		DMA_SLAVE_BUSWIDTH_4_BYTES;
++
++	/* Set burst */
++	dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK].maxburst = 2;
++	dev->dma_data[SNDRV_PCM_STREAM_CAPTURE].maxburst = 2;
++
++	/* BCLK ratio - use default */
++	dev->bclk_ratio = 0;
++
++	/* Store the pdev */
++	dev->dev = &pdev->dev;
++	dev_set_drvdata(&pdev->dev, dev);
++
++	ret = snd_soc_register_component(&pdev->dev,
++			&bcm2708_i2s_component, &bcm2708_i2s_dai, 1);
++
++	if (ret) {
++		dev_err(&pdev->dev, "Could not register DAI: %d\n", ret);
++		ret = -ENOMEM;
++		return ret;
++	}
++
++	ret = snd_dmaengine_pcm_register(&pdev->dev,
++				&bcm2708_dmaengine_pcm_config,
++				SND_DMAENGINE_PCM_FLAG_COMPAT);
++	if (ret) {
++		dev_err(&pdev->dev, "Could not register PCM: %d\n", ret);
++		snd_soc_unregister_component(&pdev->dev);
++		return ret;
++	}
++
++	return 0;
++}
++
++static int bcm2708_i2s_remove(struct platform_device *pdev)
++{
++	snd_dmaengine_pcm_unregister(&pdev->dev);
++	snd_soc_unregister_component(&pdev->dev);
++	return 0;
++}
++
++static struct platform_driver bcm2708_i2s_driver = {
++	.probe		= bcm2708_i2s_probe,
++	.remove		= bcm2708_i2s_remove,
++	.driver		= {
++		.name	= "bcm2708-i2s",
++		.owner	= THIS_MODULE,
++	},
++};
++
++module_platform_driver(bcm2708_i2s_driver);
++
++MODULE_ALIAS("platform:bcm2708-i2s");
++MODULE_DESCRIPTION("BCM2708 I2S interface");
++MODULE_AUTHOR("Florian Meier <florian.meier@koalo.de>");
++MODULE_LICENSE("GPL v2");
+diff -Nur linux-3.12.6/sound/soc/bcm/hifiberry_dac.c linux-raspberry-pi/sound/soc/bcm/hifiberry_dac.c
+--- linux-3.12.6/sound/soc/bcm/hifiberry_dac.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/sound/soc/bcm/hifiberry_dac.c	2013-12-29 10:42:25.000000000 +0100
+@@ -0,0 +1,100 @@
++/*
++ * ASoC Driver for HifiBerry DAC
++ *
++ * Author:	Florian Meier <florian.meier@koalo.de>
++ *		Copyright 2013
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ */
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/soc.h>
++#include <sound/jack.h>
++
++static int snd_rpi_hifiberry_dac_init(struct snd_soc_pcm_runtime *rtd)
++{
++	return 0;
++}
++
++static int snd_rpi_hifiberry_dac_hw_params(struct snd_pcm_substream *substream,
++				       struct snd_pcm_hw_params *params)
++{
++	struct snd_soc_pcm_runtime *rtd = substream->private_data;
++	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
++
++	unsigned int sample_bits =
++		snd_pcm_format_physical_width(params_format(params));
++
++	return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2);
++}
++
++/* machine stream operations */
++static struct snd_soc_ops snd_rpi_hifiberry_dac_ops = {
++	.hw_params = snd_rpi_hifiberry_dac_hw_params,
++};
++
++static struct snd_soc_dai_link snd_rpi_hifiberry_dac_dai[] = {
++{
++	.name		= "HifiBerry DAC",
++	.stream_name	= "HifiBerry DAC HiFi",
++	.cpu_dai_name	= "bcm2708-i2s.0",
++	.codec_dai_name	= "pcm5102a-hifi",
++	.platform_name	= "bcm2708-i2s.0",
++	.codec_name	= "pcm5102a-codec",
++	.dai_fmt	= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
++				SND_SOC_DAIFMT_CBS_CFS,
++	.ops		= &snd_rpi_hifiberry_dac_ops,
++	.init		= snd_rpi_hifiberry_dac_init,
++},
++};
++
++/* audio machine driver */
++static struct snd_soc_card snd_rpi_hifiberry_dac = {
++	.name         = "snd_rpi_hifiberry_dac",
++	.dai_link     = snd_rpi_hifiberry_dac_dai,
++	.num_links    = ARRAY_SIZE(snd_rpi_hifiberry_dac_dai),
++};
++
++static int snd_rpi_hifiberry_dac_probe(struct platform_device *pdev)
++{
++	int ret = 0;
++
++	snd_rpi_hifiberry_dac.dev = &pdev->dev;
++	ret = snd_soc_register_card(&snd_rpi_hifiberry_dac);
++	if (ret)
++		dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret);
++
++	return ret;
++}
++
++static int snd_rpi_hifiberry_dac_remove(struct platform_device *pdev)
++{
++	return snd_soc_unregister_card(&snd_rpi_hifiberry_dac);
++}
++
++static struct platform_driver snd_rpi_hifiberry_dac_driver = {
++        .driver = {
++                .name   = "snd-hifiberry-dac",
++                .owner  = THIS_MODULE,
++        },
++        .probe          = snd_rpi_hifiberry_dac_probe,
++        .remove         = snd_rpi_hifiberry_dac_remove,
++};
++
++module_platform_driver(snd_rpi_hifiberry_dac_driver);
++
++MODULE_AUTHOR("Florian Meier <florian.meier@koalo.de>");
++MODULE_DESCRIPTION("ASoC Driver for HifiBerry DAC");
++MODULE_LICENSE("GPL v2");
+diff -Nur linux-3.12.6/sound/soc/bcm/Kconfig linux-raspberry-pi/sound/soc/bcm/Kconfig
+--- linux-3.12.6/sound/soc/bcm/Kconfig	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/sound/soc/bcm/Kconfig	2013-12-29 10:42:25.000000000 +0100
+@@ -0,0 +1,24 @@
++config SND_BCM2708_SOC_I2S
++	tristate "SoC Audio support for the Broadcom BCM2708 I2S module"
++	depends on MACH_BCM2708
++	select REGMAP_MMIO
++	select SND_SOC_DMAENGINE_PCM
++	select SND_SOC_GENERIC_DMAENGINE_PCM
++	help
++	  Say Y or M if you want to add support for codecs attached to
++	  the BCM2708 I2S interface. You will also need
++	  to select the audio interfaces to support below.
++
++config SND_BCM2708_SOC_HIFIBERRY_DAC
++        tristate "Support for HifiBerry DAC"
++        depends on SND_BCM2708_SOC_I2S
++        select SND_SOC_PCM5102A
++        help
++         Say Y or M if you want to add support for HifiBerry DAC.
++
++config SND_BCM2708_SOC_RPI_DAC
++        tristate "Support for RPi-DAC"
++        depends on SND_BCM2708_SOC_I2S
++        select SND_SOC_PCM1794A
++        help
++         Say Y or M if you want to add support for RPi-DAC.
+\ No newline at end of file
+diff -Nur linux-3.12.6/sound/soc/bcm/Makefile linux-raspberry-pi/sound/soc/bcm/Makefile
+--- linux-3.12.6/sound/soc/bcm/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/sound/soc/bcm/Makefile	2013-12-29 10:42:25.000000000 +0100
+@@ -0,0 +1,11 @@
++# BCM2708 Platform Support
++snd-soc-bcm2708-i2s-objs := bcm2708-i2s.o
++
++obj-$(CONFIG_SND_BCM2708_SOC_I2S) += snd-soc-bcm2708-i2s.o
++
++# BCM2708 Machine Support
++snd-soc-hifiberry-dac-objs := hifiberry_dac.o
++snd-soc-rpi-dac-objs := rpi-dac.o
++
++obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o
++obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o
+diff -Nur linux-3.12.6/sound/soc/bcm/rpi-dac.c linux-raspberry-pi/sound/soc/bcm/rpi-dac.c
+--- linux-3.12.6/sound/soc/bcm/rpi-dac.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/sound/soc/bcm/rpi-dac.c	2013-12-29 10:42:25.000000000 +0100
+@@ -0,0 +1,97 @@
++/*
++ * ASoC Driver for RPi-DAC.
++ *
++ * Author:	Florian Meier <florian.meier@koalo.de>
++ *		Copyright 2013
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ */
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/soc.h>
++#include <sound/jack.h>
++
++static int snd_rpi_rpi_dac_init(struct snd_soc_pcm_runtime *rtd)
++{
++	return 0;
++}
++
++static int snd_rpi_rpi_dac_hw_params(struct snd_pcm_substream *substream,
++				       struct snd_pcm_hw_params *params)
++{
++	struct snd_soc_pcm_runtime *rtd = substream->private_data;
++	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
++
++	return snd_soc_dai_set_bclk_ratio(cpu_dai, 32*2);
++}
++
++/* machine stream operations */
++static struct snd_soc_ops snd_rpi_rpi_dac_ops = {
++	.hw_params = snd_rpi_rpi_dac_hw_params,
++};
++
++static struct snd_soc_dai_link snd_rpi_rpi_dac_dai[] = {
++{
++	.name		= "HifiBerry Mini",
++	.stream_name	= "HifiBerry Mini HiFi",
++	.cpu_dai_name	= "bcm2708-i2s.0",
++	.codec_dai_name	= "pcm1794a-hifi",
++	.platform_name	= "bcm2708-i2s.0",
++	.codec_name	= "pcm1794a-codec",
++	.dai_fmt	= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
++				SND_SOC_DAIFMT_CBS_CFS,
++	.ops		= &snd_rpi_rpi_dac_ops,
++	.init		= snd_rpi_rpi_dac_init,
++},
++};
++
++/* audio machine driver */
++static struct snd_soc_card snd_rpi_rpi_dac = {
++	.name         = "snd_rpi_rpi_dac",
++	.dai_link     = snd_rpi_rpi_dac_dai,
++	.num_links    = ARRAY_SIZE(snd_rpi_rpi_dac_dai),
++};
++
++static int snd_rpi_rpi_dac_probe(struct platform_device *pdev)
++{
++	int ret = 0;
++
++	snd_rpi_rpi_dac.dev = &pdev->dev;
++	ret = snd_soc_register_card(&snd_rpi_rpi_dac);
++	if (ret)
++		dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret);
++
++	return ret;
++}
++
++static int snd_rpi_rpi_dac_remove(struct platform_device *pdev)
++{
++	return snd_soc_unregister_card(&snd_rpi_rpi_dac);
++}
++
++static struct platform_driver snd_rpi_rpi_dac_driver = {
++        .driver = {
++                .name   = "snd-rpi-dac",
++                .owner  = THIS_MODULE,
++        },
++        .probe          = snd_rpi_rpi_dac_probe,
++        .remove         = snd_rpi_rpi_dac_remove,
++};
++
++module_platform_driver(snd_rpi_rpi_dac_driver);
++
++MODULE_AUTHOR("Florian Meier <florian.meier@koalo.de>");
++MODULE_DESCRIPTION("ASoC Driver for RPi-DAC");
++MODULE_LICENSE("GPL v2");
+diff -Nur linux-3.12.6/sound/soc/codecs/Kconfig linux-raspberry-pi/sound/soc/codecs/Kconfig
+--- linux-3.12.6/sound/soc/codecs/Kconfig	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/sound/soc/codecs/Kconfig	2013-12-29 10:42:25.000000000 +0100
+@@ -59,6 +59,8 @@
+ 	select SND_SOC_PCM1681 if I2C
+ 	select SND_SOC_PCM1792A if SPI_MASTER
+ 	select SND_SOC_PCM3008
++	select SND_SOC_PCM1794A
++	select SND_SOC_PCM5102A
+ 	select SND_SOC_RT5631 if I2C
+ 	select SND_SOC_RT5640 if I2C
+ 	select SND_SOC_SGTL5000 if I2C
+@@ -311,6 +313,12 @@
+ config SND_SOC_PCM3008
+        tristate
+ 
++config SND_SOC_PCM1794A
++	tristate
++
++config SND_SOC_PCM5102A
++	tristate
++
+ config SND_SOC_RT5631
+ 	tristate
+ 
+diff -Nur linux-3.12.6/sound/soc/codecs/Makefile linux-raspberry-pi/sound/soc/codecs/Makefile
+--- linux-3.12.6/sound/soc/codecs/Makefile	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/sound/soc/codecs/Makefile	2013-12-29 10:42:25.000000000 +0100
+@@ -46,6 +46,8 @@
+ snd-soc-pcm1681-objs := pcm1681.o
+ snd-soc-pcm1792a-codec-objs := pcm1792a.o
+ snd-soc-pcm3008-objs := pcm3008.o
++snd-soc-pcm1794a-objs := pcm1794a.o
++snd-soc-pcm5102a-objs := pcm5102a.o
+ snd-soc-rt5631-objs := rt5631.o
+ snd-soc-rt5640-objs := rt5640.o
+ snd-soc-sgtl5000-objs := sgtl5000.o
+@@ -179,6 +181,8 @@
+ obj-$(CONFIG_SND_SOC_PCM1681)	+= snd-soc-pcm1681.o
+ obj-$(CONFIG_SND_SOC_PCM1792A)	+= snd-soc-pcm1792a-codec.o
+ obj-$(CONFIG_SND_SOC_PCM3008)	+= snd-soc-pcm3008.o
++obj-$(CONFIG_SND_SOC_PCM1794A)	+= snd-soc-pcm1794a.o
++obj-$(CONFIG_SND_SOC_PCM5102A)	+= snd-soc-pcm5102a.o
+ obj-$(CONFIG_SND_SOC_RT5631)	+= snd-soc-rt5631.o
+ obj-$(CONFIG_SND_SOC_RT5640)	+= snd-soc-rt5640.o
+ obj-$(CONFIG_SND_SOC_SGTL5000)  += snd-soc-sgtl5000.o
+diff -Nur linux-3.12.6/sound/soc/codecs/pcm1794a.c linux-raspberry-pi/sound/soc/codecs/pcm1794a.c
+--- linux-3.12.6/sound/soc/codecs/pcm1794a.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/sound/soc/codecs/pcm1794a.c	2013-12-29 10:42:25.000000000 +0100
+@@ -0,0 +1,62 @@
++/*
++ * Driver for the PCM1794A codec
++ *
++ * Author:	Florian Meier <florian.meier@koalo.de>
++ *		Copyright 2013
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ */
++
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <sound/soc.h>
++
++static struct snd_soc_dai_driver pcm1794a_dai = {
++	.name = "pcm1794a-hifi",
++	.playback = {
++		.channels_min = 2,
++		.channels_max = 2,
++		.rates = SNDRV_PCM_RATE_8000_192000,
++		.formats = SNDRV_PCM_FMTBIT_S16_LE |
++			   SNDRV_PCM_FMTBIT_S24_LE
++	},
++};
++
++static struct snd_soc_codec_driver soc_codec_dev_pcm1794a;
++
++static int pcm1794a_probe(struct platform_device *pdev)
++{
++	return snd_soc_register_codec(&pdev->dev, &soc_codec_dev_pcm1794a,
++			&pcm1794a_dai, 1);
++}
++
++static int pcm1794a_remove(struct platform_device *pdev)
++{
++	snd_soc_unregister_codec(&pdev->dev);
++	return 0;
++}
++
++static struct platform_driver pcm1794a_codec_driver = {
++	.probe 		= pcm1794a_probe,
++	.remove 	= pcm1794a_remove,
++	.driver		= {
++		.name	= "pcm1794a-codec",
++		.owner	= THIS_MODULE,
++	},
++};
++
++module_platform_driver(pcm1794a_codec_driver);
++
++MODULE_DESCRIPTION("ASoC PCM1794A codec driver");
++MODULE_AUTHOR("Florian Meier <florian.meier@koalo.de>");
++MODULE_LICENSE("GPL v2");
+diff -Nur linux-3.12.6/sound/soc/codecs/pcm5102a.c linux-raspberry-pi/sound/soc/codecs/pcm5102a.c
+--- linux-3.12.6/sound/soc/codecs/pcm5102a.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-raspberry-pi/sound/soc/codecs/pcm5102a.c	2013-12-29 10:42:25.000000000 +0100
+@@ -0,0 +1,63 @@
++/*
++ * Driver for the PCM5102A codec
++ *
++ * Author:	Florian Meier <florian.meier@koalo.de>
++ *		Copyright 2013
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ */
++
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <sound/soc.h>
++
++static struct snd_soc_dai_driver pcm5102a_dai = {
++	.name = "pcm5102a-hifi",
++	.playback = {
++		.channels_min = 2,
++		.channels_max = 2,
++		.rates = SNDRV_PCM_RATE_8000_192000,
++		.formats = SNDRV_PCM_FMTBIT_S16_LE |
++			   SNDRV_PCM_FMTBIT_S24_LE |
++			   SNDRV_PCM_FMTBIT_S32_LE
++	},
++};
++
++static struct snd_soc_codec_driver soc_codec_dev_pcm5102a;
++
++static int pcm5102a_probe(struct platform_device *pdev)
++{
++	return snd_soc_register_codec(&pdev->dev, &soc_codec_dev_pcm5102a,
++			&pcm5102a_dai, 1);
++}
++
++static int pcm5102a_remove(struct platform_device *pdev)
++{
++	snd_soc_unregister_codec(&pdev->dev);
++	return 0;
++}
++
++static struct platform_driver pcm5102a_codec_driver = {
++	.probe 		= pcm5102a_probe,
++	.remove 	= pcm5102a_remove,
++	.driver		= {
++		.name	= "pcm5102a-codec",
++		.owner	= THIS_MODULE,
++	},
++};
++
++module_platform_driver(pcm5102a_codec_driver);
++
++MODULE_DESCRIPTION("ASoC PCM5102A codec driver");
++MODULE_AUTHOR("Florian Meier <florian.meier@koalo.de>");
++MODULE_LICENSE("GPL v2");
+diff -Nur linux-3.12.6/sound/soc/Kconfig linux-raspberry-pi/sound/soc/Kconfig
+--- linux-3.12.6/sound/soc/Kconfig	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/sound/soc/Kconfig	2013-12-29 10:42:25.000000000 +0100
+@@ -33,6 +33,7 @@
+ # All the supported SoCs
+ source "sound/soc/atmel/Kconfig"
+ source "sound/soc/au1x/Kconfig"
++source "sound/soc/bcm/Kconfig"
+ source "sound/soc/blackfin/Kconfig"
+ source "sound/soc/cirrus/Kconfig"
+ source "sound/soc/davinci/Kconfig"
+diff -Nur linux-3.12.6/sound/soc/Makefile linux-raspberry-pi/sound/soc/Makefile
+--- linux-3.12.6/sound/soc/Makefile	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/sound/soc/Makefile	2013-12-29 10:42:25.000000000 +0100
+@@ -10,6 +10,7 @@
+ obj-$(CONFIG_SND_SOC)	+= generic/
+ obj-$(CONFIG_SND_SOC)	+= atmel/
+ obj-$(CONFIG_SND_SOC)	+= au1x/
++obj-$(CONFIG_SND_SOC)	+= bcm/
+ obj-$(CONFIG_SND_SOC)	+= blackfin/
+ obj-$(CONFIG_SND_SOC)	+= cirrus/
+ obj-$(CONFIG_SND_SOC)	+= davinci/
+diff -Nur linux-3.12.6/sound/soc/soc-core.c linux-raspberry-pi/sound/soc/soc-core.c
+--- linux-3.12.6/sound/soc/soc-core.c	2013-12-20 16:51:33.000000000 +0100
++++ linux-raspberry-pi/sound/soc/soc-core.c	2013-12-29 10:42:25.000000000 +0100
+@@ -3576,6 +3576,22 @@
+ EXPORT_SYMBOL_GPL(snd_soc_codec_set_pll);
+ 
+ /**
++ * snd_soc_dai_set_bclk_ratio - configure BCLK to sample rate ratio.
++ * @dai: DAI
++ * @ratio Ratio of BCLK to Sample rate.
++ *
++ * Configures the DAI for a preset BCLK to sample rate ratio.
++ */
++int snd_soc_dai_set_bclk_ratio(struct snd_soc_dai *dai, unsigned int ratio)
++{
++	if (dai->driver && dai->driver->ops->set_bclk_ratio)
++		return dai->driver->ops->set_bclk_ratio(dai, ratio);
++	else
++		return -EINVAL;
++}
++EXPORT_SYMBOL_GPL(snd_soc_dai_set_bclk_ratio);
++
++/**
+  * snd_soc_dai_set_fmt - configure DAI hardware audio format.
+  * @dai: DAI
+  * @fmt: SND_SOC_DAIFMT_ format value.
diff --git a/target/linux/patches/3.12.6/startup.patch b/target/linux/patches/3.12.6/startup.patch
new file mode 100644
index 000000000..d23d6d212
--- /dev/null
+++ b/target/linux/patches/3.12.6/startup.patch
@@ -0,0 +1,22 @@
+diff -Nur linux-3.7.3.orig/init/main.c linux-3.7.3/init/main.c
+--- linux-3.7.3.orig/init/main.c	2013-01-17 17:47:40.000000000 +0100
++++ linux-3.7.3/init/main.c	2013-01-19 15:08:13.000000000 +0100
+@@ -834,7 +834,8 @@
+ 		printk(KERN_WARNING "Failed to execute %s.  Attempting "
+ 					"defaults...\n", execute_command);
+ 	}
+-	if (!run_init_process("/sbin/init") ||
++	if (!run_init_process("/init") ||
++ 	    !run_init_process("/sbin/init") ||
+ 	    !run_init_process("/etc/init") ||
+ 	    !run_init_process("/bin/init") ||
+ 	    !run_init_process("/bin/sh"))
+@@ -879,6 +880,8 @@
+ 	if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0)
+ 		printk(KERN_WARNING "Warning: unable to open an initial console.\n");
+ 
++	printk(KERN_WARNING "Starting Linux (built with OpenADK).\n");
++
+ 	(void) sys_dup(0);
+ 	(void) sys_dup(0);
+ 	/*
diff --git a/target/linux/patches/3.12.6/usb-defaults-off.patch b/target/linux/patches/3.12.6/usb-defaults-off.patch
new file mode 100644
index 000000000..54dff2bd4
--- /dev/null
+++ b/target/linux/patches/3.12.6/usb-defaults-off.patch
@@ -0,0 +1,20 @@
+diff -Nur linux-3.5.orig//drivers/usb/host/Kconfig linux-3.5/drivers/usb/host/Kconfig
+--- linux-3.5.orig//drivers/usb/host/Kconfig	2012-07-21 22:58:29.000000000 +0200
++++ linux-3.5/drivers/usb/host/Kconfig	2012-07-29 11:59:56.000000000 +0200
+@@ -66,6 +66,7 @@
+ config USB_EHCI_ROOT_HUB_TT
+ 	bool "Root Hub Transaction Translators"
+ 	depends on USB_EHCI_HCD || USB_CHIPIDEA_HOST
++	default n
+ 	---help---
+ 	  Some EHCI chips have vendor-specific extensions to integrate
+ 	  transaction translators, so that no OHCI or UHCI companion
+@@ -78,7 +79,7 @@
+ config USB_EHCI_TT_NEWSCHED
+ 	bool "Improved Transaction Translator scheduling"
+ 	depends on USB_EHCI_HCD || USB_CHIPIDEA_HOST
+-	default y
++	default n
+ 	---help---
+ 	  This changes the periodic scheduling code to fill more of the low
+ 	  and full speed bandwidth available from the Transaction Translator
diff --git a/target/linux/patches/3.12.6/uuid.patch b/target/linux/patches/3.12.6/uuid.patch
new file mode 100644
index 000000000..ca23accdf
--- /dev/null
+++ b/target/linux/patches/3.12.6/uuid.patch
@@ -0,0 +1,263 @@
+diff -Nur linux-3.4.2.orig/block/genhd.c linux-3.4.2/block/genhd.c
+--- linux-3.4.2.orig/block/genhd.c	2012-06-09 17:36:33.000000000 +0200
++++ linux-3.4.2/block/genhd.c	2012-06-15 18:19:16.000000000 +0200
+@@ -33,7 +33,7 @@
+ static DEFINE_MUTEX(ext_devt_mutex);
+ static DEFINE_IDR(ext_devt_idr);
+ 
+-static struct device_type disk_type;
++struct device_type disk_type;
+ 
+ static void disk_alloc_events(struct gendisk *disk);
+ static void disk_add_events(struct gendisk *disk);
+@@ -1122,7 +1122,7 @@
+ 	return NULL;
+ }
+ 
+-static struct device_type disk_type = {
++struct device_type disk_type = {
+ 	.name		= "disk",
+ 	.groups		= disk_attr_groups,
+ 	.release	= disk_release,
+diff -Nur linux-3.4.2.orig/init/do_mounts.c linux-3.4.2/init/do_mounts.c
+--- linux-3.4.2.orig/init/do_mounts.c	2012-06-09 17:36:33.000000000 +0200
++++ linux-3.4.2/init/do_mounts.c	2012-06-15 18:20:11.000000000 +0200
+@@ -21,6 +21,7 @@
+ #include <linux/nfs_fs_sb.h>
+ #include <linux/nfs_mount.h>
+ 
++#include "../fs/ext2/ext2.h"
+ #include "do_mounts.h"
+ 
+ int __initdata rd_doload;	/* 1 = load RAM disk, 0 = don't load */
+@@ -32,6 +33,132 @@
+ 
+ dev_t ROOT_DEV;
+ 
++#ifdef CONFIG_EXT2_FS
++/* support for root=UUID=ce40d6b2-18eb-4a75-aefe-7ddb0995ce63 bootargs */
++
++#include <linux/ext2_fs.h>
++
++__u8 root_dev_uuid[16];
++int root_dev_type;	/* 0 = normal (/dev/hda1, 0301); 1 = UUID; 3 = bad */
++
++/* imported from block/genhd.c after removing its static qualifier */
++extern struct device_type disk_type;
++
++/* helper function */
++static __u8 __init fromhex(char c)
++{
++	if (c >= '0' && c <= '9')
++		return (c - '0');
++	c &= ~32;
++	if (c >= 'A' && c <= 'F')
++		return (c - 'A' + 10);
++	return (0xFF);
++}
++
++static void __init parse_uuid(const char *s)
++{
++	int i;
++	__u8 j, k;
++
++	if (strlen(s) != 36 || s[8] != '-' || s[13] != '-' ||
++	    s[18] != '-' || s[23] != '-')
++		goto bad_uuid;
++	for (i = 0; i < 16; i++) {
++		if (*s == '-')
++			++s;
++		j = fromhex(*s++);
++		k = fromhex(*s++);
++		if (j == 0xFF || k == 0xFF)
++			goto bad_uuid;
++		root_dev_uuid[i] = (j << 4) | k;
++	}
++	return;
++ bad_uuid:
++	/* we cannot panic here, defer */
++	root_dev_type = 3;
++}
++
++/* from drivers/md/md.c */
++static void __init initcode_bi_complete(struct bio *bio, int error)
++{
++	complete((struct completion*)bio->bi_private);
++}
++
++static int __init initcode_sync_page_read(struct block_device *bdev,
++    sector_t sector, int size, struct page *page)
++{
++	struct bio *bio = bio_alloc(GFP_NOIO, 1);
++	struct completion event;
++	int ret, rw = READ;
++
++	rw |= REQ_SYNC;
++
++	bio->bi_bdev = bdev;
++	bio->bi_sector = sector;
++	bio_add_page(bio, page, size, 0);
++	init_completion(&event);
++	bio->bi_private = &event;
++	bio->bi_end_io = initcode_bi_complete;
++	submit_bio(rw, bio);
++	wait_for_completion(&event);
++
++	ret = test_bit(BIO_UPTODATE, &bio->bi_flags);
++	bio_put(bio);
++	/* 0 = failure */
++	return ret;
++}
++
++/* most of this taken from fs/ext2/super.c */
++static int __init check_dev(struct gendisk *thedisk, dev_t devt,
++    int blocksize, struct page *page)
++{
++	struct ext2_super_block * es;
++	struct block_device *bdev;
++	unsigned long sb_block = 1;
++	unsigned long logic_sb_block;
++	unsigned long offset = 0;
++	int rv = /* not found */ 0;
++	char bff[22];
++
++	bdev = bdget(devt);
++	if (blkdev_get(bdev, FMODE_READ, NULL)) {
++		printk(KERN_ERR "VFS: opening block device %s failed!\n",
++		    format_dev_t(bff, devt));
++		return (0);
++	}
++
++	if (blocksize != BLOCK_SIZE) {
++		logic_sb_block = (sb_block*BLOCK_SIZE) / blocksize;
++		offset = (sb_block*BLOCK_SIZE) % blocksize;
++	} else {
++		logic_sb_block = sb_block;
++	}
++
++//	printk(KERN_ERR "D: attempting to read %d @%lu from "
++//	    "bdev %p devt %08X %s\n", blocksize, logic_sb_block,
++//	    bdev, devt, format_dev_t(bff, devt));
++	if (!initcode_sync_page_read(bdev, logic_sb_block, blocksize, page)) {
++//		printk(KERN_ERR "D: failed!\n");
++		goto out;
++	}
++	es = (struct ext2_super_block *)(((char *)page_address(page)) + offset);
++	if (le16_to_cpu(es->s_magic) == EXT2_SUPER_MAGIC) {
++//		printk(KERN_ERR "D: has uuid "
++//		    "%02X%02X%02X%02X-%02X%02X-%02X%02X-%02X%02X-%02X%02X%02X%02X%02X%02X\n",
++//		    es->s_uuid[0], es->s_uuid[1], es->s_uuid[2], es->s_uuid[3],
++//		    es->s_uuid[4], es->s_uuid[5], es->s_uuid[6], es->s_uuid[7],
++//		    es->s_uuid[8], es->s_uuid[9], es->s_uuid[10], es->s_uuid[11],
++//		    es->s_uuid[12], es->s_uuid[13], es->s_uuid[14], es->s_uuid[15]);
++		if (!memcmp(es->s_uuid, root_dev_uuid, 16))
++			rv = /* found */ 1;
++	}
++//	  else printk(KERN_ERR "D: bad ext2fs magic\n");
++ out:
++	blkdev_put(bdev, FMODE_READ);
++	return (rv);
++}
++#endif /* CONFIG_EXT2_FS for UUID support */
++
+ static int __init load_ramdisk(char *str)
+ {
+ 	rd_doload = simple_strtol(str,NULL,0) & 3;
+@@ -256,6 +383,13 @@
+ static int __init root_dev_setup(char *line)
+ {
+ 	strlcpy(saved_root_name, line, sizeof(saved_root_name));
++#ifdef CONFIG_EXT2_FS
++	root_dev_type = 0;
++	if (!strncmp(line, "UUID=", 5)) {
++		root_dev_type = 1;
++		parse_uuid(line + 5);
++	}
++#endif /* CONFIG_EXT2_FS for UUID support */
+ 	return 1;
+ }
+ 
+@@ -471,6 +605,83 @@
+ 
+ void __init mount_root(void)
+ {
++#ifdef CONFIG_EXT2_FS
++	/* UUID support */
++//	printk_all_partitions();
++	if (root_dev_type == 1) {
++		int blocksize;
++
++		/* from block/genhd.c printk_all_partitions */
++		struct class_dev_iter iter;
++		struct device *dev;
++
++		/* from drivers/md/md.c */
++		struct page *sb_page;
++
++		if (!(sb_page = alloc_page(GFP_KERNEL))) {
++			printk(KERN_ERR "VFS: no memory for bio page\n");
++			goto nomemforbio;
++		}
++
++//		printk(KERN_ERR "D: root is: "
++//		    "%02X%02X%02X%02X-%02X%02X-%02X%02X-%02X%02X-%02X%02X%02X%02X%02X%02X\n",
++//		    root_dev_uuid[0], root_dev_uuid[1], root_dev_uuid[2], root_dev_uuid[3],
++//		    root_dev_uuid[4], root_dev_uuid[5], root_dev_uuid[6], root_dev_uuid[7],
++//		    root_dev_uuid[8], root_dev_uuid[9], root_dev_uuid[10], root_dev_uuid[11],
++//		    root_dev_uuid[12], root_dev_uuid[13], root_dev_uuid[14], root_dev_uuid[15]);
++		/* from block/genhd.c printk_all_partitions */
++//		printk(KERN_ERR "D: begin iter\n");
++		class_dev_iter_init(&iter, &block_class, NULL, &disk_type);
++		while (root_dev_type && (dev = class_dev_iter_next(&iter))) {
++//			char bff[22];
++			struct gendisk *disk = dev_to_disk(dev);
++			struct disk_part_iter piter;
++			struct hd_struct *part;
++			if (get_capacity(disk) == 0 ||
++			    (disk->flags & GENHD_FL_SUPPRESS_PARTITION_INFO)) {
++//				printk(KERN_ERR "D: ignoring\n");
++				continue;
++			}
++			blocksize = queue_logical_block_size(disk->queue);
++//			printk(KERN_ERR "D: gendisk, blocksize %d "
++//			    "name '%s' devt %08X %s #part %d\n", blocksize,
++//			    disk->disk_name, dev->devt,
++//			    format_dev_t(bff, dev->devt),
++//			    disk_max_parts(disk));
++			disk_part_iter_init(&piter, disk, DISK_PITER_INCL_PART0);
++			while (root_dev_type && (part = disk_part_iter_next(&piter))) {
++				/* avoid empty or too small partitions */
++//				printk(KERN_ERR "D: part #%d start %llu "
++//				    "nr %llu\n", part->partno,
++//				    (__u64)part->start_sect,
++//				    (__u64)part->nr_sects);
++				if (part->nr_sects < 8)
++					continue;
++				if (check_dev(disk, MKDEV(MAJOR(dev->devt),
++				    MINOR(dev->devt) + part->partno),
++				    blocksize, sb_page)) {
++					ROOT_DEV = part_devt(part);
++//					printk(KERN_ERR "D: got match!\n");
++					// comment out below for debugging
++					root_dev_type = 0;
++				}
++			}
++			disk_part_iter_exit(&piter);
++		}
++//		printk(KERN_ERR "D: end iter\n");
++		class_dev_iter_exit(&iter);
++		put_page(sb_page);
++	}
++ nomemforbio:
++	if (root_dev_type == 1)
++		printk(KERN_ERR "VFS: Unable to find root by UUID %s.\n",
++		    saved_root_name + 5);
++	else if (root_dev_type == 3)
++		/* execute deferred panic from parse_uuid */
++		panic("Badly formatted UUID %s was supplied as kernel "
++		    "parameter root", saved_root_name + 5);
++#endif /* CONFIG_EXT2_FS for UUID support */
++
+ #ifdef CONFIG_ROOT_NFS
+ 	if (ROOT_DEV == Root_NFS) {
+ 		if (mount_nfs_root())
diff --git a/target/linux/patches/3.12.6/vga-cons-default-off.patch b/target/linux/patches/3.12.6/vga-cons-default-off.patch
new file mode 100644
index 000000000..08a57f783
--- /dev/null
+++ b/target/linux/patches/3.12.6/vga-cons-default-off.patch
@@ -0,0 +1,12 @@
+diff -Nur linux-3.11.5.orig/drivers/video/console/Kconfig linux-3.11.5/drivers/video/console/Kconfig
+--- linux-3.11.5.orig/drivers/video/console/Kconfig	2013-10-14 03:14:45.000000000 +0200
++++ linux-3.11.5/drivers/video/console/Kconfig	2013-10-16 18:04:45.000000000 +0200
+@@ -9,7 +9,7 @@
+ 	depends on !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && \
+ 		!SUPERH && !BLACKFIN && !AVR32 && !MN10300 && !CRIS && \
+ 		(!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER)
+-	default y
++	default n
+ 	help
+ 	  Saying Y here will allow you to use Linux in text mode through a
+ 	  display that complies with the generic VGA standard. Virtually
diff --git a/target/linux/patches/3.12.6/wlan-cf.patch b/target/linux/patches/3.12.6/wlan-cf.patch
new file mode 100644
index 000000000..fc20759e2
--- /dev/null
+++ b/target/linux/patches/3.12.6/wlan-cf.patch
@@ -0,0 +1,11 @@
+diff -Nur linux-2.6.39.orig/drivers/net/wireless/hostap/hostap_cs.c linux-2.6.39/drivers/net/wireless/hostap/hostap_cs.c
+--- linux-2.6.39.orig/drivers/net/wireless/hostap/hostap_cs.c	2011-05-19 06:06:34.000000000 +0200
++++ linux-2.6.39/drivers/net/wireless/hostap/hostap_cs.c	2011-09-12 02:46:26.987984145 +0200
+@@ -623,6 +623,7 @@
+ static struct pcmcia_device_id hostap_cs_ids[] = {
+ 	PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100),
+ 	PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300),
++	PCMCIA_DEVICE_MANF_CARD(0x0004, 0x2003),
+ 	PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777),
+ 	PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000),
+ 	PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002),
diff --git a/target/linux/patches/3.12.6/zlib-inflate.patch b/target/linux/patches/3.12.6/zlib-inflate.patch
new file mode 100644
index 000000000..58e1f6d21
--- /dev/null
+++ b/target/linux/patches/3.12.6/zlib-inflate.patch
@@ -0,0 +1,12 @@
+diff -Nur linux-2.6.37.orig/lib/Kconfig linux-2.6.37/lib/Kconfig
+--- linux-2.6.37.orig/lib/Kconfig	2011-01-05 01:50:19.000000000 +0100
++++ linux-2.6.37/lib/Kconfig	2011-03-01 20:10:29.833370667 +0100
+@@ -95,7 +95,7 @@
+ # compression support is select'ed if needed
+ #
+ config ZLIB_INFLATE
+-	tristate
++	boolean
+ 
+ config ZLIB_DEFLATE
+ 	tristate
diff --git a/toolchain/kernel-headers/patches/3.12.6/cleankernel.patch b/toolchain/kernel-headers/patches/3.12.6/cleankernel.patch
new file mode 100644
index 000000000..d8c055dc3
--- /dev/null
+++ b/toolchain/kernel-headers/patches/3.12.6/cleankernel.patch
@@ -0,0 +1,11 @@
+diff -Nur linux-3.11.5.orig/scripts/Makefile.headersinst linux-3.11.5/scripts/Makefile.headersinst
+--- linux-3.11.5.orig/scripts/Makefile.headersinst	2013-10-14 03:14:45.000000000 +0200
++++ linux-3.11.5/scripts/Makefile.headersinst	2013-10-15 16:33:10.000000000 +0200
+@@ -107,7 +107,6 @@
+ 
+ targets += $(install-file)
+ $(install-file): scripts/headers_install.sh $(input-files1) $(input-files2) $(input-files3) FORCE
+-	$(if $(unwanted),$(call cmd,remove),)
+ 	$(if $(wildcard $(dir $@)),,$(shell mkdir -p $(dir $@)))
+ 	$(call if_changed,install)
+ 
diff --git a/toolchain/kernel-headers/patches/3.12.6/cris-header.patch b/toolchain/kernel-headers/patches/3.12.6/cris-header.patch
new file mode 100644
index 000000000..da455f3b3
--- /dev/null
+++ b/toolchain/kernel-headers/patches/3.12.6/cris-header.patch
@@ -0,0 +1,65 @@
+diff -Nur linux-3.11.5.orig/arch/cris/include/arch-v10/arch/Kbuild linux-3.11.5/arch/cris/include/arch-v10/arch/Kbuild
+--- linux-3.11.5.orig/arch/cris/include/arch-v10/arch/Kbuild	2013-10-14 03:14:45.000000000 +0200
++++ linux-3.11.5/arch/cris/include/arch-v10/arch/Kbuild	2013-10-15 17:05:47.000000000 +0200
+@@ -1 +1,5 @@
+ # CRISv10 arch
++header-y += ptrace.h
++header-y += user.h
++header-y += elf.h
++header-y += system.h
+diff -Nur linux-3.11.5.orig/arch/cris/include/asm/Kbuild linux-3.11.5/arch/cris/include/asm/Kbuild
+--- linux-3.11.5.orig/arch/cris/include/asm/Kbuild	2013-10-14 03:14:45.000000000 +0200
++++ linux-3.11.5/arch/cris/include/asm/Kbuild	2013-10-15 17:06:22.000000000 +0200
+@@ -1,7 +1,7 @@
+-
+-header-y += arch-v10/
+-header-y += arch-v32/
+-
++header-y += ../arch-v10/arch/
++header-y += ../arch-v32/arch/
++header-y += elf.h
++header-y += user.h
+ 
+ generic-y += clkdev.h
+ generic-y += exec.h
+diff -Nur linux-3.11.5.orig/arch/cris/include/uapi/asm/Kbuild linux-3.11.5/arch/cris/include/uapi/asm/Kbuild
+--- linux-3.11.5.orig/arch/cris/include/uapi/asm/Kbuild	2013-10-14 03:14:45.000000000 +0200
++++ linux-3.11.5/arch/cris/include/uapi/asm/Kbuild	2013-10-15 17:05:49.000000000 +0200
+@@ -1,8 +1,8 @@
+ # UAPI Header export list
+ include include/uapi/asm-generic/Kbuild.asm
+ 
+-header-y += arch-v10/
+-header-y += arch-v32/
++header-y += ../arch-v10/arch/
++header-y += ../arch-v32/arch/
+ header-y += auxvec.h
+ header-y += bitsperlong.h
+ header-y += byteorder.h
+diff -Nur linux-3.11.5.orig/include/uapi/asm-generic/Kbuild linux-3.11.5/include/uapi/asm-generic/Kbuild
+--- linux-3.11.5.orig/include/uapi/asm-generic/Kbuild	2013-10-14 03:14:45.000000000 +0200
++++ linux-3.11.5/include/uapi/asm-generic/Kbuild	2013-10-15 17:05:49.000000000 +0200
+@@ -34,3 +34,4 @@
+ header-y += types.h
+ header-y += ucontext.h
+ header-y += unistd.h
++header-y += user.h
+diff -Nur linux-3.11.5.orig/include/uapi/asm-generic/Kbuild.asm linux-3.11.5/include/uapi/asm-generic/Kbuild.asm
+--- linux-3.11.5.orig/include/uapi/asm-generic/Kbuild.asm	2013-10-14 03:14:45.000000000 +0200
++++ linux-3.11.5/include/uapi/asm-generic/Kbuild.asm	2013-10-15 17:05:49.000000000 +0200
+@@ -18,6 +18,7 @@
+ header-y += ipcbuf.h
+ header-y += mman.h
+ header-y += msgbuf.h
++header-y += page.h
+ header-y += param.h
+ header-y += poll.h
+ header-y += posix_types.h
+@@ -38,6 +39,7 @@
+ header-y += termios.h
+ header-y += types.h
+ header-y += unistd.h
++header-y += user.h
+ 
+ header-y += $(foreach hdr,$(opt-header), \
+ 	      $(if \
diff --git a/toolchain/kernel-headers/patches/3.12.6/microperl.patch b/toolchain/kernel-headers/patches/3.12.6/microperl.patch
new file mode 100644
index 000000000..298d96593
--- /dev/null
+++ b/toolchain/kernel-headers/patches/3.12.6/microperl.patch
@@ -0,0 +1,13 @@
+diff -Nur linux-3.11.5.orig/scripts/headers_check.pl linux-3.11.5/scripts/headers_check.pl
+--- linux-3.11.5.orig/scripts/headers_check.pl	2013-10-14 03:14:45.000000000 +0200
++++ linux-3.11.5/scripts/headers_check.pl	2013-10-16 17:08:59.000000000 +0200
+@@ -18,7 +18,7 @@
+ #
+ # 3) Check for leaked CONFIG_ symbols
+ 
+-use strict;
++#use strict;
+ use File::Basename;
+ 
+ my ($dir, $arch, @files) = @ARGV;
+
diff --git a/toolchain/kernel-headers/patches/3.12.6/mkpiggy.patch b/toolchain/kernel-headers/patches/3.12.6/mkpiggy.patch
new file mode 100644
index 000000000..d4e815cd2
--- /dev/null
+++ b/toolchain/kernel-headers/patches/3.12.6/mkpiggy.patch
@@ -0,0 +1,28 @@
+diff -Nur linux-3.4.4.orig/arch/x86/boot/compressed/mkpiggy.c linux-3.4.4/arch/x86/boot/compressed/mkpiggy.c
+--- linux-3.4.4.orig/arch/x86/boot/compressed/mkpiggy.c	2012-06-22 20:37:50.000000000 +0200
++++ linux-3.4.4/arch/x86/boot/compressed/mkpiggy.c	2012-07-03 09:48:02.000000000 +0200
+@@ -29,7 +29,14 @@
+ #include <stdio.h>
+ #include <string.h>
+ #include <inttypes.h>
+-#include <tools/le_byteshift.h>
++
++static uint32_t getle32(const void *p)
++{
++	const uint8_t *cp = p;
++
++	return (uint32_t)cp[0] + ((uint32_t)cp[1] << 8) +
++		((uint32_t)cp[2] << 16) + ((uint32_t)cp[3] << 24);
++}
+ 
+ int main(int argc, char *argv[])
+ {
+@@ -62,7 +69,7 @@
+ 	}
+ 
+ 	ilen = ftell(f);
+-	olen = get_unaligned_le32(&olen);
++	olen = getle32(&olen);
+ 	fclose(f);
+ 
+ 	/*
diff --git a/toolchain/kernel-headers/patches/3.12.6/relocs.patch b/toolchain/kernel-headers/patches/3.12.6/relocs.patch
new file mode 100644
index 000000000..649b9e73e
--- /dev/null
+++ b/toolchain/kernel-headers/patches/3.12.6/relocs.patch
@@ -0,0 +1,2693 @@
+diff -Nur linux-3.11.5.orig/arch/x86/tools/relocs.h linux-3.11.5/arch/x86/tools/relocs.h
+--- linux-3.11.5.orig/arch/x86/tools/relocs.h	2013-10-14 03:14:45.000000000 +0200
++++ linux-3.11.5/arch/x86/tools/relocs.h	2013-10-20 17:41:16.000000000 +0200
+@@ -9,10 +9,14 @@
+ #include <string.h>
+ #include <errno.h>
+ #include <unistd.h>
++#ifdef __linux__
+ #include <elf.h>
+ #include <byteswap.h>
+ #define USE_BSD
+ #include <endian.h>
++#else
++#include "elf.h"
++#endif
+ #include <regex.h>
+ #include <tools/le_byteshift.h>
+ 
+diff -Nur linux-3.11.5.orig/tools/include/elf.h linux-3.11.5/tools/include/elf.h
+--- linux-3.11.5.orig/tools/include/elf.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-3.11.5/tools/include/elf.h	2013-10-20 17:42:10.000000000 +0200
+@@ -0,0 +1,2671 @@
++#ifndef _ELF_H
++#define _ELF_H
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#include <stdint.h>
++
++typedef uint16_t Elf32_Half;
++typedef uint16_t Elf64_Half;
++
++typedef uint32_t Elf32_Word;
++typedef	int32_t  Elf32_Sword;
++typedef uint32_t Elf64_Word;
++typedef	int32_t  Elf64_Sword;
++
++typedef uint64_t Elf32_Xword;
++typedef	int64_t  Elf32_Sxword;
++typedef uint64_t Elf64_Xword;
++typedef	int64_t  Elf64_Sxword;
++
++typedef uint32_t Elf32_Addr;
++typedef uint64_t Elf64_Addr;
++
++typedef uint32_t Elf32_Off;
++typedef uint64_t Elf64_Off;
++
++typedef uint16_t Elf32_Section;
++typedef uint16_t Elf64_Section;
++
++typedef Elf32_Half Elf32_Versym;
++typedef Elf64_Half Elf64_Versym;
++
++#define EI_NIDENT (16)
++
++typedef struct {
++  unsigned char	e_ident[EI_NIDENT];
++  Elf32_Half	e_type;
++  Elf32_Half	e_machine;
++  Elf32_Word	e_version;
++  Elf32_Addr	e_entry;
++  Elf32_Off	e_phoff;
++  Elf32_Off	e_shoff;
++  Elf32_Word	e_flags;
++  Elf32_Half	e_ehsize;
++  Elf32_Half	e_phentsize;
++  Elf32_Half	e_phnum;
++  Elf32_Half	e_shentsize;
++  Elf32_Half	e_shnum;
++  Elf32_Half	e_shstrndx;
++} Elf32_Ehdr;
++
++typedef struct {
++  unsigned char	e_ident[EI_NIDENT];
++  Elf64_Half	e_type;
++  Elf64_Half	e_machine;
++  Elf64_Word	e_version;
++  Elf64_Addr	e_entry;
++  Elf64_Off	e_phoff;
++  Elf64_Off	e_shoff;
++  Elf64_Word	e_flags;
++  Elf64_Half	e_ehsize;
++  Elf64_Half	e_phentsize;
++  Elf64_Half	e_phnum;
++  Elf64_Half	e_shentsize;
++  Elf64_Half	e_shnum;
++  Elf64_Half	e_shstrndx;
++} Elf64_Ehdr;
++
++#define EI_MAG0		0
++#define ELFMAG0		0x7f
++
++#define EI_MAG1		1
++#define ELFMAG1		'E'
++
++#define EI_MAG2		2
++#define ELFMAG2		'L'
++
++#define EI_MAG3		3
++#define ELFMAG3		'F'
++
++
++#define	ELFMAG		"\177ELF"
++#define	SELFMAG		4
++
++#define EI_CLASS	4
++#define ELFCLASSNONE	0
++#define ELFCLASS32	1
++#define ELFCLASS64	2
++#define ELFCLASSNUM	3
++
++#define EI_DATA		5
++#define ELFDATANONE	0
++#define ELFDATA2LSB	1
++#define ELFDATA2MSB	2
++#define ELFDATANUM	3
++
++#define EI_VERSION	6
++
++
++#define EI_OSABI	7
++#define ELFOSABI_NONE		0
++#define ELFOSABI_SYSV		0
++#define ELFOSABI_HPUX		1
++#define ELFOSABI_NETBSD		2
++#define ELFOSABI_LINUX		3
++#define ELFOSABI_GNU		3
++#define ELFOSABI_SOLARIS	6
++#define ELFOSABI_AIX		7
++#define ELFOSABI_IRIX		8
++#define ELFOSABI_FREEBSD	9
++#define ELFOSABI_TRU64		10
++#define ELFOSABI_MODESTO	11
++#define ELFOSABI_OPENBSD	12
++#define ELFOSABI_ARM		97
++#define ELFOSABI_STANDALONE	255
++
++#define EI_ABIVERSION	8
++
++#define EI_PAD		9
++
++
++
++#define ET_NONE		0
++#define ET_REL		1
++#define ET_EXEC		2
++#define ET_DYN		3
++#define ET_CORE		4
++#define	ET_NUM		5
++#define ET_LOOS		0xfe00
++#define ET_HIOS		0xfeff
++#define ET_LOPROC	0xff00
++#define ET_HIPROC	0xffff
++
++
++
++#define EM_NONE		 0
++#define EM_M32		 1
++#define EM_SPARC	 2
++#define EM_386		 3
++#define EM_68K		 4
++#define EM_88K		 5
++#define EM_860		 7
++#define EM_MIPS		 8
++#define EM_S370		 9
++#define EM_MIPS_RS3_LE	10
++
++#define EM_PARISC	15
++#define EM_VPP500	17
++#define EM_SPARC32PLUS	18
++#define EM_960		19
++#define EM_PPC		20
++#define EM_PPC64	21
++#define EM_S390		22
++
++#define EM_V800		36
++#define EM_FR20		37
++#define EM_RH32		38
++#define EM_RCE		39
++#define EM_ARM		40
++#define EM_FAKE_ALPHA	41
++#define EM_SH		42
++#define EM_SPARCV9	43
++#define EM_TRICORE	44
++#define EM_ARC		45
++#define EM_H8_300	46
++#define EM_H8_300H	47
++#define EM_H8S		48
++#define EM_H8_500	49
++#define EM_IA_64	50
++#define EM_MIPS_X	51
++#define EM_COLDFIRE	52
++#define EM_68HC12	53
++#define EM_MMA		54
++#define EM_PCP		55
++#define EM_NCPU		56
++#define EM_NDR1		57
++#define EM_STARCORE	58
++#define EM_ME16		59
++#define EM_ST100	60
++#define EM_TINYJ	61
++#define EM_X86_64	62
++#define EM_PDSP		63
++
++#define EM_FX66		66
++#define EM_ST9PLUS	67
++#define EM_ST7		68
++#define EM_68HC16	69
++#define EM_68HC11	70
++#define EM_68HC08	71
++#define EM_68HC05	72
++#define EM_SVX		73
++#define EM_ST19		74
++#define EM_VAX		75
++#define EM_CRIS		76
++#define EM_JAVELIN	77
++#define EM_FIREPATH	78
++#define EM_ZSP		79
++#define EM_MMIX		80
++#define EM_HUANY	81
++#define EM_PRISM	82
++#define EM_AVR		83
++#define EM_FR30		84
++#define EM_D10V		85
++#define EM_D30V		86
++#define EM_V850		87
++#define EM_M32R		88
++#define EM_MN10300	89
++#define EM_MN10200	90
++#define EM_PJ		91
++#define EM_OPENRISC	92
++#define EM_ARC_A5	93
++#define EM_XTENSA	94
++#define EM_AARCH64	183
++#define EM_TILEPRO	188
++#define EM_MICROBLAZE	189
++#define EM_TILEGX	191
++#define EM_NUM		192
++#define EM_ALPHA	0x9026
++
++#define EV_NONE		0
++#define EV_CURRENT	1
++#define EV_NUM		2
++
++typedef struct {
++  Elf32_Word	sh_name;
++  Elf32_Word	sh_type;
++  Elf32_Word	sh_flags;
++  Elf32_Addr	sh_addr;
++  Elf32_Off	sh_offset;
++  Elf32_Word	sh_size;
++  Elf32_Word	sh_link;
++  Elf32_Word	sh_info;
++  Elf32_Word	sh_addralign;
++  Elf32_Word	sh_entsize;
++} Elf32_Shdr;
++
++typedef struct {
++  Elf64_Word	sh_name;
++  Elf64_Word	sh_type;
++  Elf64_Xword	sh_flags;
++  Elf64_Addr	sh_addr;
++  Elf64_Off	sh_offset;
++  Elf64_Xword	sh_size;
++  Elf64_Word	sh_link;
++  Elf64_Word	sh_info;
++  Elf64_Xword	sh_addralign;
++  Elf64_Xword	sh_entsize;
++} Elf64_Shdr;
++
++
++
++#define SHN_UNDEF	0
++#define SHN_LORESERVE	0xff00
++#define SHN_LOPROC	0xff00
++#define SHN_BEFORE	0xff00
++
++#define SHN_AFTER	0xff01
++
++#define SHN_HIPROC	0xff1f
++#define SHN_LOOS	0xff20
++#define SHN_HIOS	0xff3f
++#define SHN_ABS		0xfff1
++#define SHN_COMMON	0xfff2
++#define SHN_XINDEX	0xffff
++#define SHN_HIRESERVE	0xffff
++
++
++
++#define SHT_NULL	  0
++#define SHT_PROGBITS	  1
++#define SHT_SYMTAB	  2
++#define SHT_STRTAB	  3
++#define SHT_RELA	  4
++#define SHT_HASH	  5
++#define SHT_DYNAMIC	  6
++#define SHT_NOTE	  7
++#define SHT_NOBITS	  8
++#define SHT_REL		  9
++#define SHT_SHLIB	  10
++#define SHT_DYNSYM	  11
++#define SHT_INIT_ARRAY	  14
++#define SHT_FINI_ARRAY	  15
++#define SHT_PREINIT_ARRAY 16
++#define SHT_GROUP	  17
++#define SHT_SYMTAB_SHNDX  18
++#define	SHT_NUM		  19
++#define SHT_LOOS	  0x60000000
++#define SHT_GNU_ATTRIBUTES 0x6ffffff5
++#define SHT_GNU_HASH	  0x6ffffff6
++#define SHT_GNU_LIBLIST	  0x6ffffff7
++#define SHT_CHECKSUM	  0x6ffffff8
++#define SHT_LOSUNW	  0x6ffffffa
++#define SHT_SUNW_move	  0x6ffffffa
++#define SHT_SUNW_COMDAT   0x6ffffffb
++#define SHT_SUNW_syminfo  0x6ffffffc
++#define SHT_GNU_verdef	  0x6ffffffd
++#define SHT_GNU_verneed	  0x6ffffffe
++#define SHT_GNU_versym	  0x6fffffff
++#define SHT_HISUNW	  0x6fffffff
++#define SHT_HIOS	  0x6fffffff
++#define SHT_LOPROC	  0x70000000
++#define SHT_HIPROC	  0x7fffffff
++#define SHT_LOUSER	  0x80000000
++#define SHT_HIUSER	  0x8fffffff
++
++#define SHF_WRITE	     (1 << 0)
++#define SHF_ALLOC	     (1 << 1)
++#define SHF_EXECINSTR	     (1 << 2)
++#define SHF_MERGE	     (1 << 4)
++#define SHF_STRINGS	     (1 << 5)
++#define SHF_INFO_LINK	     (1 << 6)
++#define SHF_LINK_ORDER	     (1 << 7)
++#define SHF_OS_NONCONFORMING (1 << 8)
++
++#define SHF_GROUP	     (1 << 9)
++#define SHF_TLS		     (1 << 10)
++#define SHF_MASKOS	     0x0ff00000
++#define SHF_MASKPROC	     0xf0000000
++#define SHF_ORDERED	     (1 << 30)
++#define SHF_EXCLUDE	     (1 << 31)
++
++#define GRP_COMDAT	0x1
++
++typedef struct {
++  Elf32_Word	st_name;
++  Elf32_Addr	st_value;
++  Elf32_Word	st_size;
++  unsigned char	st_info;
++  unsigned char	st_other;
++  Elf32_Section	st_shndx;
++} Elf32_Sym;
++
++typedef struct {
++  Elf64_Word	st_name;
++  unsigned char	st_info;
++  unsigned char st_other;
++  Elf64_Section	st_shndx;
++  Elf64_Addr	st_value;
++  Elf64_Xword	st_size;
++} Elf64_Sym;
++
++typedef struct {
++  Elf32_Half si_boundto;
++  Elf32_Half si_flags;
++} Elf32_Syminfo;
++
++typedef struct {
++  Elf64_Half si_boundto;
++  Elf64_Half si_flags;
++} Elf64_Syminfo;
++
++#define SYMINFO_BT_SELF		0xffff
++#define SYMINFO_BT_PARENT	0xfffe
++#define SYMINFO_BT_LOWRESERVE	0xff00
++
++#define SYMINFO_FLG_DIRECT	0x0001
++#define SYMINFO_FLG_PASSTHRU	0x0002
++#define SYMINFO_FLG_COPY	0x0004
++#define SYMINFO_FLG_LAZYLOAD	0x0008
++
++#define SYMINFO_NONE		0
++#define SYMINFO_CURRENT		1
++#define SYMINFO_NUM		2
++
++#define ELF32_ST_BIND(val)		(((unsigned char) (val)) >> 4)
++#define ELF32_ST_TYPE(val)		((val) & 0xf)
++#define ELF32_ST_INFO(bind, type)	(((bind) << 4) + ((type) & 0xf))
++
++#define ELF64_ST_BIND(val)		ELF32_ST_BIND (val)
++#define ELF64_ST_TYPE(val)		ELF32_ST_TYPE (val)
++#define ELF64_ST_INFO(bind, type)	ELF32_ST_INFO ((bind), (type))
++
++#define STB_LOCAL	0
++#define STB_GLOBAL	1
++#define STB_WEAK	2
++#define	STB_NUM		3
++#define STB_LOOS	10
++#define STB_GNU_UNIQUE	10
++#define STB_HIOS	12
++#define STB_LOPROC	13
++#define STB_HIPROC	15
++
++#define STT_NOTYPE	0
++#define STT_OBJECT	1
++#define STT_FUNC	2
++#define STT_SECTION	3
++#define STT_FILE	4
++#define STT_COMMON	5
++#define STT_TLS		6
++#define	STT_NUM		7
++#define STT_LOOS	10
++#define STT_GNU_IFUNC	10
++#define STT_HIOS	12
++#define STT_LOPROC	13
++#define STT_HIPROC	15
++
++#define STN_UNDEF	0
++
++#define ELF32_ST_VISIBILITY(o)	((o) & 0x03)
++#define ELF64_ST_VISIBILITY(o)	ELF32_ST_VISIBILITY (o)
++
++#define STV_DEFAULT	0
++#define STV_INTERNAL	1
++#define STV_HIDDEN	2
++#define STV_PROTECTED	3
++
++
++
++
++typedef struct
++{
++  Elf32_Addr	r_offset;
++  Elf32_Word	r_info;
++} Elf32_Rel;
++
++typedef struct {
++  Elf64_Addr	r_offset;
++  Elf64_Xword	r_info;
++} Elf64_Rel;
++
++
++
++typedef struct {
++  Elf32_Addr	r_offset;
++  Elf32_Word	r_info;
++  Elf32_Sword	r_addend;
++} Elf32_Rela;
++
++typedef struct {
++  Elf64_Addr	r_offset;
++  Elf64_Xword	r_info;
++  Elf64_Sxword	r_addend;
++} Elf64_Rela;
++
++
++
++#define ELF32_R_SYM(val)		((val) >> 8)
++#define ELF32_R_TYPE(val)		((val) & 0xff)
++#define ELF32_R_INFO(sym, type)		(((sym) << 8) + ((type) & 0xff))
++
++#define ELF64_R_SYM(i)			((i) >> 32)
++#define ELF64_R_TYPE(i)			((i) & 0xffffffff)
++#define ELF64_R_INFO(sym,type)		((((Elf64_Xword) (sym)) << 32) + (type))
++
++
++
++typedef struct {
++  Elf32_Word	p_type;
++  Elf32_Off	p_offset;
++  Elf32_Addr	p_vaddr;
++  Elf32_Addr	p_paddr;
++  Elf32_Word	p_filesz;
++  Elf32_Word	p_memsz;
++  Elf32_Word	p_flags;
++  Elf32_Word	p_align;
++} Elf32_Phdr;
++
++typedef struct {
++  Elf64_Word	p_type;
++  Elf64_Word	p_flags;
++  Elf64_Off	p_offset;
++  Elf64_Addr	p_vaddr;
++  Elf64_Addr	p_paddr;
++  Elf64_Xword	p_filesz;
++  Elf64_Xword	p_memsz;
++  Elf64_Xword	p_align;
++} Elf64_Phdr;
++
++
++
++#define	PT_NULL		0
++#define PT_LOAD		1
++#define PT_DYNAMIC	2
++#define PT_INTERP	3
++#define PT_NOTE		4
++#define PT_SHLIB	5
++#define PT_PHDR		6
++#define PT_TLS		7
++#define	PT_NUM		8
++#define PT_LOOS		0x60000000
++#define PT_GNU_EH_FRAME	0x6474e550
++#define PT_GNU_STACK	0x6474e551
++#define PT_GNU_RELRO	0x6474e552
++#define PT_LOSUNW	0x6ffffffa
++#define PT_SUNWBSS	0x6ffffffa
++#define PT_SUNWSTACK	0x6ffffffb
++#define PT_HISUNW	0x6fffffff
++#define PT_HIOS		0x6fffffff
++#define PT_LOPROC	0x70000000
++#define PT_HIPROC	0x7fffffff
++
++
++#define PN_XNUM 0xffff
++
++
++#define PF_X		(1 << 0)
++#define PF_W		(1 << 1)
++#define PF_R		(1 << 2)
++#define PF_MASKOS	0x0ff00000
++#define PF_MASKPROC	0xf0000000
++
++
++
++#define NT_PRSTATUS	1
++#define NT_FPREGSET	2
++#define NT_PRPSINFO	3
++#define NT_PRXREG	4
++#define NT_TASKSTRUCT	4
++#define NT_PLATFORM	5
++#define NT_AUXV		6
++#define NT_GWINDOWS	7
++#define NT_ASRS		8
++#define NT_PSTATUS	10
++#define NT_PSINFO	13
++#define NT_PRCRED	14
++#define NT_UTSNAME	15
++#define NT_LWPSTATUS	16
++#define NT_LWPSINFO	17
++#define NT_PRFPXREG	20
++#define NT_SIGINFO	0x53494749
++#define NT_FILE		0x46494c45
++#define NT_PRXFPREG	0x46e62b7f
++#define NT_PPC_VMX	0x100
++#define NT_PPC_SPE	0x101
++#define NT_PPC_VSX	0x102
++#define NT_386_TLS	0x200
++#define NT_386_IOPERM	0x201
++#define NT_X86_XSTATE	0x202
++#define NT_S390_HIGH_GPRS	0x300
++#define NT_S390_TIMER	0x301
++#define NT_S390_TODCMP	0x302
++#define NT_S390_TODPREG	0x303
++#define NT_S390_CTRS	0x304
++#define NT_S390_PREFIX	0x305
++#define NT_S390_LAST_BREAK	0x306
++#define NT_S390_SYSTEM_CALL	0x307
++#define NT_S390_TDB	0x308
++#define NT_ARM_VFP	0x400
++#define NT_ARM_TLS	0x401
++#define NT_ARM_HW_BREAK	0x402
++#define NT_ARM_HW_WATCH	0x403
++#define NT_METAG_CBUF	0x500
++#define NT_METAG_RPIPE	0x501
++#define NT_METAG_TLS	0x502
++#define NT_VERSION	1
++
++
++
++
++typedef struct {
++  Elf32_Sword d_tag;
++  union {
++      Elf32_Word d_val;
++      Elf32_Addr d_ptr;
++  } d_un;
++} Elf32_Dyn;
++
++typedef struct {
++  Elf64_Sxword d_tag;
++  union {
++      Elf64_Xword d_val;
++      Elf64_Addr d_ptr;
++  } d_un;
++} Elf64_Dyn;
++
++
++
++#define DT_NULL		0
++#define DT_NEEDED	1
++#define DT_PLTRELSZ	2
++#define DT_PLTGOT	3
++#define DT_HASH		4
++#define DT_STRTAB	5
++#define DT_SYMTAB	6
++#define DT_RELA		7
++#define DT_RELASZ	8
++#define DT_RELAENT	9
++#define DT_STRSZ	10
++#define DT_SYMENT	11
++#define DT_INIT		12
++#define DT_FINI		13
++#define DT_SONAME	14
++#define DT_RPATH	15
++#define DT_SYMBOLIC	16
++#define DT_REL		17
++#define DT_RELSZ	18
++#define DT_RELENT	19
++#define DT_PLTREL	20
++#define DT_DEBUG	21
++#define DT_TEXTREL	22
++#define DT_JMPREL	23
++#define	DT_BIND_NOW	24
++#define	DT_INIT_ARRAY	25
++#define	DT_FINI_ARRAY	26
++#define	DT_INIT_ARRAYSZ	27
++#define	DT_FINI_ARRAYSZ	28
++#define DT_RUNPATH	29
++#define DT_FLAGS	30
++#define DT_ENCODING	32
++#define DT_PREINIT_ARRAY 32
++#define DT_PREINIT_ARRAYSZ 33
++#define	DT_NUM		34
++#define DT_LOOS		0x6000000d
++#define DT_HIOS		0x6ffff000
++#define DT_LOPROC	0x70000000
++#define DT_HIPROC	0x7fffffff
++#define	DT_PROCNUM	DT_MIPS_NUM
++
++#define DT_VALRNGLO	0x6ffffd00
++#define DT_GNU_PRELINKED 0x6ffffdf5
++#define DT_GNU_CONFLICTSZ 0x6ffffdf6
++#define DT_GNU_LIBLISTSZ 0x6ffffdf7
++#define DT_CHECKSUM	0x6ffffdf8
++#define DT_PLTPADSZ	0x6ffffdf9
++#define DT_MOVEENT	0x6ffffdfa
++#define DT_MOVESZ	0x6ffffdfb
++#define DT_FEATURE_1	0x6ffffdfc
++#define DT_POSFLAG_1	0x6ffffdfd
++
++#define DT_SYMINSZ	0x6ffffdfe
++#define DT_SYMINENT	0x6ffffdff
++#define DT_VALRNGHI	0x6ffffdff
++#define DT_VALTAGIDX(tag)	(DT_VALRNGHI - (tag))
++#define DT_VALNUM 12
++
++#define DT_ADDRRNGLO	0x6ffffe00
++#define DT_GNU_HASH	0x6ffffef5
++#define DT_TLSDESC_PLT	0x6ffffef6
++#define DT_TLSDESC_GOT	0x6ffffef7
++#define DT_GNU_CONFLICT	0x6ffffef8
++#define DT_GNU_LIBLIST	0x6ffffef9
++#define DT_CONFIG	0x6ffffefa
++#define DT_DEPAUDIT	0x6ffffefb
++#define DT_AUDIT	0x6ffffefc
++#define	DT_PLTPAD	0x6ffffefd
++#define	DT_MOVETAB	0x6ffffefe
++#define DT_SYMINFO	0x6ffffeff
++#define DT_ADDRRNGHI	0x6ffffeff
++#define DT_ADDRTAGIDX(tag)	(DT_ADDRRNGHI - (tag))
++#define DT_ADDRNUM 11
++
++
++
++#define DT_VERSYM	0x6ffffff0
++
++#define DT_RELACOUNT	0x6ffffff9
++#define DT_RELCOUNT	0x6ffffffa
++
++
++#define DT_FLAGS_1	0x6ffffffb
++#define	DT_VERDEF	0x6ffffffc
++
++#define	DT_VERDEFNUM	0x6ffffffd
++#define	DT_VERNEED	0x6ffffffe
++
++#define	DT_VERNEEDNUM	0x6fffffff
++#define DT_VERSIONTAGIDX(tag)	(DT_VERNEEDNUM - (tag))
++#define DT_VERSIONTAGNUM 16
++
++
++
++#define DT_AUXILIARY    0x7ffffffd
++#define DT_FILTER       0x7fffffff
++#define DT_EXTRATAGIDX(tag)	((Elf32_Word)-((Elf32_Sword) (tag) <<1>>1)-1)
++#define DT_EXTRANUM	3
++
++
++#define DF_ORIGIN	0x00000001
++#define DF_SYMBOLIC	0x00000002
++#define DF_TEXTREL	0x00000004
++#define DF_BIND_NOW	0x00000008
++#define DF_STATIC_TLS	0x00000010
++
++
++
++#define DF_1_NOW	0x00000001
++#define DF_1_GLOBAL	0x00000002
++#define DF_1_GROUP	0x00000004
++#define DF_1_NODELETE	0x00000008
++#define DF_1_LOADFLTR	0x00000010
++#define DF_1_INITFIRST	0x00000020
++#define DF_1_NOOPEN	0x00000040
++#define DF_1_ORIGIN	0x00000080
++#define DF_1_DIRECT	0x00000100
++#define DF_1_TRANS	0x00000200
++#define DF_1_INTERPOSE	0x00000400
++#define DF_1_NODEFLIB	0x00000800
++#define DF_1_NODUMP	0x00001000
++#define DF_1_CONFALT	0x00002000
++#define DF_1_ENDFILTEE	0x00004000
++#define	DF_1_DISPRELDNE	0x00008000
++#define	DF_1_DISPRELPND	0x00010000
++#define	DF_1_NODIRECT	0x00020000
++#define	DF_1_IGNMULDEF	0x00040000
++#define	DF_1_NOKSYMS	0x00080000
++#define	DF_1_NOHDR	0x00100000
++#define	DF_1_EDITED	0x00200000
++#define	DF_1_NORELOC	0x00400000
++#define	DF_1_SYMINTPOSE	0x00800000
++#define	DF_1_GLOBAUDIT	0x01000000
++#define	DF_1_SINGLETON	0x02000000
++
++#define DTF_1_PARINIT	0x00000001
++#define DTF_1_CONFEXP	0x00000002
++
++
++#define DF_P1_LAZYLOAD	0x00000001
++#define DF_P1_GROUPPERM	0x00000002
++
++
++
++
++typedef struct {
++  Elf32_Half	vd_version;
++  Elf32_Half	vd_flags;
++  Elf32_Half	vd_ndx;
++  Elf32_Half	vd_cnt;
++  Elf32_Word	vd_hash;
++  Elf32_Word	vd_aux;
++  Elf32_Word	vd_next;
++} Elf32_Verdef;
++
++typedef struct {
++  Elf64_Half	vd_version;
++  Elf64_Half	vd_flags;
++  Elf64_Half	vd_ndx;
++  Elf64_Half	vd_cnt;
++  Elf64_Word	vd_hash;
++  Elf64_Word	vd_aux;
++  Elf64_Word	vd_next;
++} Elf64_Verdef;
++
++
++
++#define VER_DEF_NONE	0
++#define VER_DEF_CURRENT	1
++#define VER_DEF_NUM	2
++
++
++#define VER_FLG_BASE	0x1
++#define VER_FLG_WEAK	0x2
++
++
++#define	VER_NDX_LOCAL		0
++#define	VER_NDX_GLOBAL		1
++#define	VER_NDX_LORESERVE	0xff00
++#define	VER_NDX_ELIMINATE	0xff01
++
++
++
++typedef struct {
++  Elf32_Word	vda_name;
++  Elf32_Word	vda_next;
++} Elf32_Verdaux;
++
++typedef struct {
++  Elf64_Word	vda_name;
++  Elf64_Word	vda_next;
++} Elf64_Verdaux;
++
++
++
++
++typedef struct {
++  Elf32_Half	vn_version;
++  Elf32_Half	vn_cnt;
++  Elf32_Word	vn_file;
++  Elf32_Word	vn_aux;
++  Elf32_Word	vn_next;
++} Elf32_Verneed;
++
++typedef struct {
++  Elf64_Half	vn_version;
++  Elf64_Half	vn_cnt;
++  Elf64_Word	vn_file;
++  Elf64_Word	vn_aux;
++  Elf64_Word	vn_next;
++} Elf64_Verneed;
++
++
++
++#define VER_NEED_NONE	 0
++#define VER_NEED_CURRENT 1
++#define VER_NEED_NUM	 2
++
++
++
++typedef struct {
++  Elf32_Word	vna_hash;
++  Elf32_Half	vna_flags;
++  Elf32_Half	vna_other;
++  Elf32_Word	vna_name;
++  Elf32_Word	vna_next;
++} Elf32_Vernaux;
++
++typedef struct {
++  Elf64_Word	vna_hash;
++  Elf64_Half	vna_flags;
++  Elf64_Half	vna_other;
++  Elf64_Word	vna_name;
++  Elf64_Word	vna_next;
++} Elf64_Vernaux;
++
++
++
++#define VER_FLG_WEAK	0x2
++
++
++
++typedef struct {
++  uint32_t a_type;
++  union {
++      uint32_t a_val;
++  } a_un;
++} Elf32_auxv_t;
++
++typedef struct {
++  uint64_t a_type;
++  union {
++      uint64_t a_val;
++  } a_un;
++} Elf64_auxv_t;
++
++
++
++#define AT_NULL		0
++#define AT_IGNORE	1
++#define AT_EXECFD	2
++#define AT_PHDR		3
++#define AT_PHENT	4
++#define AT_PHNUM	5
++#define AT_PAGESZ	6
++#define AT_BASE		7
++#define AT_FLAGS	8
++#define AT_ENTRY	9
++#define AT_NOTELF	10
++#define AT_UID		11
++#define AT_EUID		12
++#define AT_GID		13
++#define AT_EGID		14
++#define AT_CLKTCK	17
++
++
++#define AT_PLATFORM	15
++#define AT_HWCAP	16
++
++
++
++
++#define AT_FPUCW	18
++
++
++#define AT_DCACHEBSIZE	19
++#define AT_ICACHEBSIZE	20
++#define AT_UCACHEBSIZE	21
++
++
++
++#define AT_IGNOREPPC	22
++
++#define	AT_SECURE	23
++
++#define AT_BASE_PLATFORM 24
++
++#define AT_RANDOM	25
++
++#define AT_HWCAP2	26
++
++#define AT_EXECFN	31
++
++
++
++#define AT_SYSINFO	32
++#define AT_SYSINFO_EHDR	33
++
++
++
++#define AT_L1I_CACHESHAPE	34
++#define AT_L1D_CACHESHAPE	35
++#define AT_L2_CACHESHAPE	36
++#define AT_L3_CACHESHAPE	37
++
++
++
++
++typedef struct {
++  Elf32_Word n_namesz;
++  Elf32_Word n_descsz;
++  Elf32_Word n_type;
++} Elf32_Nhdr;
++
++typedef struct {
++  Elf64_Word n_namesz;
++  Elf64_Word n_descsz;
++  Elf64_Word n_type;
++} Elf64_Nhdr;
++
++
++
++
++#define ELF_NOTE_SOLARIS	"SUNW Solaris"
++
++
++#define ELF_NOTE_GNU		"GNU"
++
++
++
++
++
++#define ELF_NOTE_PAGESIZE_HINT	1
++
++
++#define NT_GNU_ABI_TAG	1
++#define ELF_NOTE_ABI	NT_GNU_ABI_TAG
++
++
++
++#define ELF_NOTE_OS_LINUX	0
++#define ELF_NOTE_OS_GNU		1
++#define ELF_NOTE_OS_SOLARIS2	2
++#define ELF_NOTE_OS_FREEBSD	3
++
++#define NT_GNU_BUILD_ID	3
++#define NT_GNU_GOLD_VERSION	4
++
++
++
++typedef struct {
++  Elf32_Xword m_value;
++  Elf32_Word m_info;
++  Elf32_Word m_poffset;
++  Elf32_Half m_repeat;
++  Elf32_Half m_stride;
++} Elf32_Move;
++
++typedef struct {
++  Elf64_Xword m_value;
++  Elf64_Xword m_info;
++  Elf64_Xword m_poffset;
++  Elf64_Half m_repeat;
++  Elf64_Half m_stride;
++} Elf64_Move;
++
++
++#define ELF32_M_SYM(info)	((info) >> 8)
++#define ELF32_M_SIZE(info)	((unsigned char) (info))
++#define ELF32_M_INFO(sym, size)	(((sym) << 8) + (unsigned char) (size))
++
++#define ELF64_M_SYM(info)	ELF32_M_SYM (info)
++#define ELF64_M_SIZE(info)	ELF32_M_SIZE (info)
++#define ELF64_M_INFO(sym, size)	ELF32_M_INFO (sym, size)
++
++#define EF_CPU32	0x00810000
++
++#define R_68K_NONE	0
++#define R_68K_32	1
++#define R_68K_16	2
++#define R_68K_8		3
++#define R_68K_PC32	4
++#define R_68K_PC16	5
++#define R_68K_PC8	6
++#define R_68K_GOT32	7
++#define R_68K_GOT16	8
++#define R_68K_GOT8	9
++#define R_68K_GOT32O	10
++#define R_68K_GOT16O	11
++#define R_68K_GOT8O	12
++#define R_68K_PLT32	13
++#define R_68K_PLT16	14
++#define R_68K_PLT8	15
++#define R_68K_PLT32O	16
++#define R_68K_PLT16O	17
++#define R_68K_PLT8O	18
++#define R_68K_COPY	19
++#define R_68K_GLOB_DAT	20
++#define R_68K_JMP_SLOT	21
++#define R_68K_RELATIVE	22
++#define R_68K_NUM	23
++
++#define R_386_NONE	   0
++#define R_386_32	   1
++#define R_386_PC32	   2
++#define R_386_GOT32	   3
++#define R_386_PLT32	   4
++#define R_386_COPY	   5
++#define R_386_GLOB_DAT	   6
++#define R_386_JMP_SLOT	   7
++#define R_386_RELATIVE	   8
++#define R_386_GOTOFF	   9
++#define R_386_GOTPC	   10
++#define R_386_32PLT	   11
++#define R_386_TLS_TPOFF	   14
++#define R_386_TLS_IE	   15
++#define R_386_TLS_GOTIE	   16
++#define R_386_TLS_LE	   17
++#define R_386_TLS_GD	   18
++#define R_386_TLS_LDM	   19
++#define R_386_16	   20
++#define R_386_PC16	   21
++#define R_386_8		   22
++#define R_386_PC8	   23
++#define R_386_TLS_GD_32	   24
++#define R_386_TLS_GD_PUSH  25
++#define R_386_TLS_GD_CALL  26
++#define R_386_TLS_GD_POP   27
++#define R_386_TLS_LDM_32   28
++#define R_386_TLS_LDM_PUSH 29
++#define R_386_TLS_LDM_CALL 30
++#define R_386_TLS_LDM_POP  31
++#define R_386_TLS_LDO_32   32
++#define R_386_TLS_IE_32	   33
++#define R_386_TLS_LE_32	   34
++#define R_386_TLS_DTPMOD32 35
++#define R_386_TLS_DTPOFF32 36
++#define R_386_TLS_TPOFF32  37
++#define R_386_SIZE32       38
++#define R_386_TLS_GOTDESC  39
++#define R_386_TLS_DESC_CALL 40
++#define R_386_TLS_DESC     41
++#define R_386_IRELATIVE	   42
++#define R_386_NUM	   43
++
++
++
++
++
++#define STT_SPARC_REGISTER	13
++
++
++
++#define EF_SPARCV9_MM		3
++#define EF_SPARCV9_TSO		0
++#define EF_SPARCV9_PSO		1
++#define EF_SPARCV9_RMO		2
++#define EF_SPARC_LEDATA		0x800000
++#define EF_SPARC_EXT_MASK	0xFFFF00
++#define EF_SPARC_32PLUS		0x000100
++#define EF_SPARC_SUN_US1	0x000200
++#define EF_SPARC_HAL_R1		0x000400
++#define EF_SPARC_SUN_US3	0x000800
++
++
++
++#define R_SPARC_NONE		0
++#define R_SPARC_8		1
++#define R_SPARC_16		2
++#define R_SPARC_32		3
++#define R_SPARC_DISP8		4
++#define R_SPARC_DISP16		5
++#define R_SPARC_DISP32		6
++#define R_SPARC_WDISP30		7
++#define R_SPARC_WDISP22		8
++#define R_SPARC_HI22		9
++#define R_SPARC_22		10
++#define R_SPARC_13		11
++#define R_SPARC_LO10		12
++#define R_SPARC_GOT10		13
++#define R_SPARC_GOT13		14
++#define R_SPARC_GOT22		15
++#define R_SPARC_PC10		16
++#define R_SPARC_PC22		17
++#define R_SPARC_WPLT30		18
++#define R_SPARC_COPY		19
++#define R_SPARC_GLOB_DAT	20
++#define R_SPARC_JMP_SLOT	21
++#define R_SPARC_RELATIVE	22
++#define R_SPARC_UA32		23
++
++
++
++#define R_SPARC_PLT32		24
++#define R_SPARC_HIPLT22		25
++#define R_SPARC_LOPLT10		26
++#define R_SPARC_PCPLT32		27
++#define R_SPARC_PCPLT22		28
++#define R_SPARC_PCPLT10		29
++#define R_SPARC_10		30
++#define R_SPARC_11		31
++#define R_SPARC_64		32
++#define R_SPARC_OLO10		33
++#define R_SPARC_HH22		34
++#define R_SPARC_HM10		35
++#define R_SPARC_LM22		36
++#define R_SPARC_PC_HH22		37
++#define R_SPARC_PC_HM10		38
++#define R_SPARC_PC_LM22		39
++#define R_SPARC_WDISP16		40
++#define R_SPARC_WDISP19		41
++#define R_SPARC_GLOB_JMP	42
++#define R_SPARC_7		43
++#define R_SPARC_5		44
++#define R_SPARC_6		45
++#define R_SPARC_DISP64		46
++#define R_SPARC_PLT64		47
++#define R_SPARC_HIX22		48
++#define R_SPARC_LOX10		49
++#define R_SPARC_H44		50
++#define R_SPARC_M44		51
++#define R_SPARC_L44		52
++#define R_SPARC_REGISTER	53
++#define R_SPARC_UA64		54
++#define R_SPARC_UA16		55
++#define R_SPARC_TLS_GD_HI22	56
++#define R_SPARC_TLS_GD_LO10	57
++#define R_SPARC_TLS_GD_ADD	58
++#define R_SPARC_TLS_GD_CALL	59
++#define R_SPARC_TLS_LDM_HI22	60
++#define R_SPARC_TLS_LDM_LO10	61
++#define R_SPARC_TLS_LDM_ADD	62
++#define R_SPARC_TLS_LDM_CALL	63
++#define R_SPARC_TLS_LDO_HIX22	64
++#define R_SPARC_TLS_LDO_LOX10	65
++#define R_SPARC_TLS_LDO_ADD	66
++#define R_SPARC_TLS_IE_HI22	67
++#define R_SPARC_TLS_IE_LO10	68
++#define R_SPARC_TLS_IE_LD	69
++#define R_SPARC_TLS_IE_LDX	70
++#define R_SPARC_TLS_IE_ADD	71
++#define R_SPARC_TLS_LE_HIX22	72
++#define R_SPARC_TLS_LE_LOX10	73
++#define R_SPARC_TLS_DTPMOD32	74
++#define R_SPARC_TLS_DTPMOD64	75
++#define R_SPARC_TLS_DTPOFF32	76
++#define R_SPARC_TLS_DTPOFF64	77
++#define R_SPARC_TLS_TPOFF32	78
++#define R_SPARC_TLS_TPOFF64	79
++#define R_SPARC_GOTDATA_HIX22	80
++#define R_SPARC_GOTDATA_LOX10	81
++#define R_SPARC_GOTDATA_OP_HIX22	82
++#define R_SPARC_GOTDATA_OP_LOX10	83
++#define R_SPARC_GOTDATA_OP	84
++#define R_SPARC_H34		85
++#define R_SPARC_SIZE32		86
++#define R_SPARC_SIZE64		87
++#define R_SPARC_GNU_VTINHERIT	250
++#define R_SPARC_GNU_VTENTRY	251
++#define R_SPARC_REV32		252
++
++#define R_SPARC_NUM		253
++
++
++
++#define DT_SPARC_REGISTER 0x70000001
++#define DT_SPARC_NUM	2
++
++
++#define EF_MIPS_NOREORDER   1
++#define EF_MIPS_PIC	    2
++#define EF_MIPS_CPIC	    4
++#define EF_MIPS_XGOT	    8
++#define EF_MIPS_64BIT_WHIRL 16
++#define EF_MIPS_ABI2	    32
++#define EF_MIPS_ABI_ON32    64
++#define EF_MIPS_ARCH	    0xf0000000
++
++
++
++#define EF_MIPS_ARCH_1	    0x00000000
++#define EF_MIPS_ARCH_2	    0x10000000
++#define EF_MIPS_ARCH_3	    0x20000000
++#define EF_MIPS_ARCH_4	    0x30000000
++#define EF_MIPS_ARCH_5	    0x40000000
++#define EF_MIPS_ARCH_32     0x50000000
++#define EF_MIPS_ARCH_64     0x60000000
++#define EF_MIPS_ARCH_32R2   0x70000000
++#define EF_MIPS_ARCH_64R2   0x80000000
++
++
++#define E_MIPS_ARCH_1	  0x00000000
++#define E_MIPS_ARCH_2	  0x10000000
++#define E_MIPS_ARCH_3	  0x20000000
++#define E_MIPS_ARCH_4	  0x30000000
++#define E_MIPS_ARCH_5	  0x40000000
++#define E_MIPS_ARCH_32	  0x50000000
++#define E_MIPS_ARCH_64	  0x60000000
++
++
++
++#define SHN_MIPS_ACOMMON    0xff00
++#define SHN_MIPS_TEXT	    0xff01
++#define SHN_MIPS_DATA	    0xff02
++#define SHN_MIPS_SCOMMON    0xff03
++#define SHN_MIPS_SUNDEFINED 0xff04
++
++
++
++#define SHT_MIPS_LIBLIST       0x70000000
++#define SHT_MIPS_MSYM	       0x70000001
++#define SHT_MIPS_CONFLICT      0x70000002
++#define SHT_MIPS_GPTAB	       0x70000003
++#define SHT_MIPS_UCODE	       0x70000004
++#define SHT_MIPS_DEBUG	       0x70000005
++#define SHT_MIPS_REGINFO       0x70000006
++#define SHT_MIPS_PACKAGE       0x70000007
++#define SHT_MIPS_PACKSYM       0x70000008
++#define SHT_MIPS_RELD	       0x70000009
++#define SHT_MIPS_IFACE         0x7000000b
++#define SHT_MIPS_CONTENT       0x7000000c
++#define SHT_MIPS_OPTIONS       0x7000000d
++#define SHT_MIPS_SHDR	       0x70000010
++#define SHT_MIPS_FDESC	       0x70000011
++#define SHT_MIPS_EXTSYM	       0x70000012
++#define SHT_MIPS_DENSE	       0x70000013
++#define SHT_MIPS_PDESC	       0x70000014
++#define SHT_MIPS_LOCSYM	       0x70000015
++#define SHT_MIPS_AUXSYM	       0x70000016
++#define SHT_MIPS_OPTSYM	       0x70000017
++#define SHT_MIPS_LOCSTR	       0x70000018
++#define SHT_MIPS_LINE	       0x70000019
++#define SHT_MIPS_RFDESC	       0x7000001a
++#define SHT_MIPS_DELTASYM      0x7000001b
++#define SHT_MIPS_DELTAINST     0x7000001c
++#define SHT_MIPS_DELTACLASS    0x7000001d
++#define SHT_MIPS_DWARF         0x7000001e
++#define SHT_MIPS_DELTADECL     0x7000001f
++#define SHT_MIPS_SYMBOL_LIB    0x70000020
++#define SHT_MIPS_EVENTS	       0x70000021
++#define SHT_MIPS_TRANSLATE     0x70000022
++#define SHT_MIPS_PIXIE	       0x70000023
++#define SHT_MIPS_XLATE	       0x70000024
++#define SHT_MIPS_XLATE_DEBUG   0x70000025
++#define SHT_MIPS_WHIRL	       0x70000026
++#define SHT_MIPS_EH_REGION     0x70000027
++#define SHT_MIPS_XLATE_OLD     0x70000028
++#define SHT_MIPS_PDR_EXCEPTION 0x70000029
++
++
++
++#define SHF_MIPS_GPREL	 0x10000000
++#define SHF_MIPS_MERGE	 0x20000000
++#define SHF_MIPS_ADDR	 0x40000000
++#define SHF_MIPS_STRINGS 0x80000000
++#define SHF_MIPS_NOSTRIP 0x08000000
++#define SHF_MIPS_LOCAL	 0x04000000
++#define SHF_MIPS_NAMES	 0x02000000
++#define SHF_MIPS_NODUPE	 0x01000000
++
++
++
++
++
++#define STO_MIPS_DEFAULT		0x0
++#define STO_MIPS_INTERNAL		0x1
++#define STO_MIPS_HIDDEN			0x2
++#define STO_MIPS_PROTECTED		0x3
++#define STO_MIPS_PLT			0x8
++#define STO_MIPS_SC_ALIGN_UNUSED	0xff
++
++
++#define STB_MIPS_SPLIT_COMMON		13
++
++
++
++typedef union {
++  struct {
++      Elf32_Word gt_current_g_value;
++      Elf32_Word gt_unused;
++  } gt_header;
++  struct {
++      Elf32_Word gt_g_value;
++      Elf32_Word gt_bytes;
++  } gt_entry;
++} Elf32_gptab;
++
++
++
++typedef struct {
++  Elf32_Word	ri_gprmask;
++  Elf32_Word	ri_cprmask[4];
++  Elf32_Sword	ri_gp_value;
++} Elf32_RegInfo;
++
++
++
++typedef struct {
++  unsigned char kind;
++
++  unsigned char size;
++  Elf32_Section section;
++
++  Elf32_Word info;
++} Elf_Options;
++
++
++
++#define ODK_NULL	0
++#define ODK_REGINFO	1
++#define ODK_EXCEPTIONS	2
++#define ODK_PAD		3
++#define ODK_HWPATCH	4
++#define ODK_FILL	5
++#define ODK_TAGS	6
++#define ODK_HWAND	7
++#define ODK_HWOR	8
++
++
++
++#define OEX_FPU_MIN	0x1f
++#define OEX_FPU_MAX	0x1f00
++#define OEX_PAGE0	0x10000
++#define OEX_SMM		0x20000
++#define OEX_FPDBUG	0x40000
++#define OEX_PRECISEFP	OEX_FPDBUG
++#define OEX_DISMISS	0x80000
++
++#define OEX_FPU_INVAL	0x10
++#define OEX_FPU_DIV0	0x08
++#define OEX_FPU_OFLO	0x04
++#define OEX_FPU_UFLO	0x02
++#define OEX_FPU_INEX	0x01
++
++
++
++#define OHW_R4KEOP	0x1
++#define OHW_R8KPFETCH	0x2
++#define OHW_R5KEOP	0x4
++#define OHW_R5KCVTL	0x8
++
++#define OPAD_PREFIX	0x1
++#define OPAD_POSTFIX	0x2
++#define OPAD_SYMBOL	0x4
++
++
++
++typedef struct {
++  Elf32_Word hwp_flags1;
++  Elf32_Word hwp_flags2;
++} Elf_Options_Hw;
++
++
++
++#define OHWA0_R4KEOP_CHECKED	0x00000001
++#define OHWA1_R4KEOP_CLEAN	0x00000002
++
++
++
++#define R_MIPS_NONE		0
++#define R_MIPS_16		1
++#define R_MIPS_32		2
++#define R_MIPS_REL32		3
++#define R_MIPS_26		4
++#define R_MIPS_HI16		5
++#define R_MIPS_LO16		6
++#define R_MIPS_GPREL16		7
++#define R_MIPS_LITERAL		8
++#define R_MIPS_GOT16		9
++#define R_MIPS_PC16		10
++#define R_MIPS_CALL16		11
++#define R_MIPS_GPREL32		12
++
++#define R_MIPS_SHIFT5		16
++#define R_MIPS_SHIFT6		17
++#define R_MIPS_64		18
++#define R_MIPS_GOT_DISP		19
++#define R_MIPS_GOT_PAGE		20
++#define R_MIPS_GOT_OFST		21
++#define R_MIPS_GOT_HI16		22
++#define R_MIPS_GOT_LO16		23
++#define R_MIPS_SUB		24
++#define R_MIPS_INSERT_A		25
++#define R_MIPS_INSERT_B		26
++#define R_MIPS_DELETE		27
++#define R_MIPS_HIGHER		28
++#define R_MIPS_HIGHEST		29
++#define R_MIPS_CALL_HI16	30
++#define R_MIPS_CALL_LO16	31
++#define R_MIPS_SCN_DISP		32
++#define R_MIPS_REL16		33
++#define R_MIPS_ADD_IMMEDIATE	34
++#define R_MIPS_PJUMP		35
++#define R_MIPS_RELGOT		36
++#define R_MIPS_JALR		37
++#define R_MIPS_TLS_DTPMOD32	38
++#define R_MIPS_TLS_DTPREL32	39
++#define R_MIPS_TLS_DTPMOD64	40
++#define R_MIPS_TLS_DTPREL64	41
++#define R_MIPS_TLS_GD		42
++#define R_MIPS_TLS_LDM		43
++#define R_MIPS_TLS_DTPREL_HI16	44
++#define R_MIPS_TLS_DTPREL_LO16	45
++#define R_MIPS_TLS_GOTTPREL	46
++#define R_MIPS_TLS_TPREL32	47
++#define R_MIPS_TLS_TPREL64	48
++#define R_MIPS_TLS_TPREL_HI16	49
++#define R_MIPS_TLS_TPREL_LO16	50
++#define R_MIPS_GLOB_DAT		51
++#define R_MIPS_COPY		126
++#define R_MIPS_JUMP_SLOT        127
++
++#define R_MIPS_NUM		128
++
++
++
++#define PT_MIPS_REGINFO	0x70000000
++#define PT_MIPS_RTPROC  0x70000001
++#define PT_MIPS_OPTIONS 0x70000002
++
++
++
++#define PF_MIPS_LOCAL	0x10000000
++
++
++
++#define DT_MIPS_RLD_VERSION  0x70000001
++#define DT_MIPS_TIME_STAMP   0x70000002
++#define DT_MIPS_ICHECKSUM    0x70000003
++#define DT_MIPS_IVERSION     0x70000004
++#define DT_MIPS_FLAGS	     0x70000005
++#define DT_MIPS_BASE_ADDRESS 0x70000006
++#define DT_MIPS_MSYM	     0x70000007
++#define DT_MIPS_CONFLICT     0x70000008
++#define DT_MIPS_LIBLIST	     0x70000009
++#define DT_MIPS_LOCAL_GOTNO  0x7000000a
++#define DT_MIPS_CONFLICTNO   0x7000000b
++#define DT_MIPS_LIBLISTNO    0x70000010
++#define DT_MIPS_SYMTABNO     0x70000011
++#define DT_MIPS_UNREFEXTNO   0x70000012
++#define DT_MIPS_GOTSYM	     0x70000013
++#define DT_MIPS_HIPAGENO     0x70000014
++#define DT_MIPS_RLD_MAP	     0x70000016
++#define DT_MIPS_DELTA_CLASS  0x70000017
++#define DT_MIPS_DELTA_CLASS_NO    0x70000018
++
++#define DT_MIPS_DELTA_INSTANCE    0x70000019
++#define DT_MIPS_DELTA_INSTANCE_NO 0x7000001a
++
++#define DT_MIPS_DELTA_RELOC  0x7000001b
++#define DT_MIPS_DELTA_RELOC_NO 0x7000001c
++
++#define DT_MIPS_DELTA_SYM    0x7000001d
++
++#define DT_MIPS_DELTA_SYM_NO 0x7000001e
++
++#define DT_MIPS_DELTA_CLASSSYM 0x70000020
++
++#define DT_MIPS_DELTA_CLASSSYM_NO 0x70000021
++
++#define DT_MIPS_CXX_FLAGS    0x70000022
++#define DT_MIPS_PIXIE_INIT   0x70000023
++#define DT_MIPS_SYMBOL_LIB   0x70000024
++#define DT_MIPS_LOCALPAGE_GOTIDX 0x70000025
++#define DT_MIPS_LOCAL_GOTIDX 0x70000026
++#define DT_MIPS_HIDDEN_GOTIDX 0x70000027
++#define DT_MIPS_PROTECTED_GOTIDX 0x70000028
++#define DT_MIPS_OPTIONS	     0x70000029
++#define DT_MIPS_INTERFACE    0x7000002a
++#define DT_MIPS_DYNSTR_ALIGN 0x7000002b
++#define DT_MIPS_INTERFACE_SIZE 0x7000002c
++#define DT_MIPS_RLD_TEXT_RESOLVE_ADDR 0x7000002d
++
++#define DT_MIPS_PERF_SUFFIX  0x7000002e
++
++#define DT_MIPS_COMPACT_SIZE 0x7000002f
++#define DT_MIPS_GP_VALUE     0x70000030
++#define DT_MIPS_AUX_DYNAMIC  0x70000031
++
++#define DT_MIPS_PLTGOT	     0x70000032
++
++#define DT_MIPS_RWPLT        0x70000034
++#define DT_MIPS_NUM	     0x35
++
++
++
++#define RHF_NONE		   0
++#define RHF_QUICKSTART		   (1 << 0)
++#define RHF_NOTPOT		   (1 << 1)
++#define RHF_NO_LIBRARY_REPLACEMENT (1 << 2)
++#define RHF_NO_MOVE		   (1 << 3)
++#define RHF_SGI_ONLY		   (1 << 4)
++#define RHF_GUARANTEE_INIT	   (1 << 5)
++#define RHF_DELTA_C_PLUS_PLUS	   (1 << 6)
++#define RHF_GUARANTEE_START_INIT   (1 << 7)
++#define RHF_PIXIE		   (1 << 8)
++#define RHF_DEFAULT_DELAY_LOAD	   (1 << 9)
++#define RHF_REQUICKSTART	   (1 << 10)
++#define RHF_REQUICKSTARTED	   (1 << 11)
++#define RHF_CORD		   (1 << 12)
++#define RHF_NO_UNRES_UNDEF	   (1 << 13)
++#define RHF_RLD_ORDER_SAFE	   (1 << 14)
++
++
++
++typedef struct
++{
++  Elf32_Word l_name;
++  Elf32_Word l_time_stamp;
++  Elf32_Word l_checksum;
++  Elf32_Word l_version;
++  Elf32_Word l_flags;
++} Elf32_Lib;
++
++typedef struct
++{
++  Elf64_Word l_name;
++  Elf64_Word l_time_stamp;
++  Elf64_Word l_checksum;
++  Elf64_Word l_version;
++  Elf64_Word l_flags;
++} Elf64_Lib;
++
++
++
++
++#define LL_NONE		  0
++#define LL_EXACT_MATCH	  (1 << 0)
++#define LL_IGNORE_INT_VER (1 << 1)
++#define LL_REQUIRE_MINOR  (1 << 2)
++#define LL_EXPORTS	  (1 << 3)
++#define LL_DELAY_LOAD	  (1 << 4)
++#define LL_DELTA	  (1 << 5)
++
++
++
++typedef Elf32_Addr Elf32_Conflict;
++
++
++
++
++
++
++#define EF_PARISC_TRAPNIL	0x00010000
++#define EF_PARISC_EXT		0x00020000
++#define EF_PARISC_LSB		0x00040000
++#define EF_PARISC_WIDE		0x00080000
++#define EF_PARISC_NO_KABP	0x00100000
++
++#define EF_PARISC_LAZYSWAP	0x00400000
++#define EF_PARISC_ARCH		0x0000ffff
++
++
++
++#define EFA_PARISC_1_0		    0x020b
++#define EFA_PARISC_1_1		    0x0210
++#define EFA_PARISC_2_0		    0x0214
++
++
++
++#define SHN_PARISC_ANSI_COMMON	0xff00
++
++#define SHN_PARISC_HUGE_COMMON	0xff01
++
++
++
++#define SHT_PARISC_EXT		0x70000000
++#define SHT_PARISC_UNWIND	0x70000001
++#define SHT_PARISC_DOC		0x70000002
++
++
++
++#define SHF_PARISC_SHORT	0x20000000
++#define SHF_PARISC_HUGE		0x40000000
++#define SHF_PARISC_SBP		0x80000000
++
++
++
++#define STT_PARISC_MILLICODE	13
++
++#define STT_HP_OPAQUE		(STT_LOOS + 0x1)
++#define STT_HP_STUB		(STT_LOOS + 0x2)
++
++
++
++#define R_PARISC_NONE		0
++#define R_PARISC_DIR32		1
++#define R_PARISC_DIR21L		2
++#define R_PARISC_DIR17R		3
++#define R_PARISC_DIR17F		4
++#define R_PARISC_DIR14R		6
++#define R_PARISC_PCREL32	9
++#define R_PARISC_PCREL21L	10
++#define R_PARISC_PCREL17R	11
++#define R_PARISC_PCREL17F	12
++#define R_PARISC_PCREL14R	14
++#define R_PARISC_DPREL21L	18
++#define R_PARISC_DPREL14R	22
++#define R_PARISC_GPREL21L	26
++#define R_PARISC_GPREL14R	30
++#define R_PARISC_LTOFF21L	34
++#define R_PARISC_LTOFF14R	38
++#define R_PARISC_SECREL32	41
++#define R_PARISC_SEGBASE	48
++#define R_PARISC_SEGREL32	49
++#define R_PARISC_PLTOFF21L	50
++#define R_PARISC_PLTOFF14R	54
++#define R_PARISC_LTOFF_FPTR32	57
++#define R_PARISC_LTOFF_FPTR21L	58
++#define R_PARISC_LTOFF_FPTR14R	62
++#define R_PARISC_FPTR64		64
++#define R_PARISC_PLABEL32	65
++#define R_PARISC_PLABEL21L	66
++#define R_PARISC_PLABEL14R	70
++#define R_PARISC_PCREL64	72
++#define R_PARISC_PCREL22F	74
++#define R_PARISC_PCREL14WR	75
++#define R_PARISC_PCREL14DR	76
++#define R_PARISC_PCREL16F	77
++#define R_PARISC_PCREL16WF	78
++#define R_PARISC_PCREL16DF	79
++#define R_PARISC_DIR64		80
++#define R_PARISC_DIR14WR	83
++#define R_PARISC_DIR14DR	84
++#define R_PARISC_DIR16F		85
++#define R_PARISC_DIR16WF	86
++#define R_PARISC_DIR16DF	87
++#define R_PARISC_GPREL64	88
++#define R_PARISC_GPREL14WR	91
++#define R_PARISC_GPREL14DR	92
++#define R_PARISC_GPREL16F	93
++#define R_PARISC_GPREL16WF	94
++#define R_PARISC_GPREL16DF	95
++#define R_PARISC_LTOFF64	96
++#define R_PARISC_LTOFF14WR	99
++#define R_PARISC_LTOFF14DR	100
++#define R_PARISC_LTOFF16F	101
++#define R_PARISC_LTOFF16WF	102
++#define R_PARISC_LTOFF16DF	103
++#define R_PARISC_SECREL64	104
++#define R_PARISC_SEGREL64	112
++#define R_PARISC_PLTOFF14WR	115
++#define R_PARISC_PLTOFF14DR	116
++#define R_PARISC_PLTOFF16F	117
++#define R_PARISC_PLTOFF16WF	118
++#define R_PARISC_PLTOFF16DF	119
++#define R_PARISC_LTOFF_FPTR64	120
++#define R_PARISC_LTOFF_FPTR14WR	123
++#define R_PARISC_LTOFF_FPTR14DR	124
++#define R_PARISC_LTOFF_FPTR16F	125
++#define R_PARISC_LTOFF_FPTR16WF	126
++#define R_PARISC_LTOFF_FPTR16DF	127
++#define R_PARISC_LORESERVE	128
++#define R_PARISC_COPY		128
++#define R_PARISC_IPLT		129
++#define R_PARISC_EPLT		130
++#define R_PARISC_TPREL32	153
++#define R_PARISC_TPREL21L	154
++#define R_PARISC_TPREL14R	158
++#define R_PARISC_LTOFF_TP21L	162
++#define R_PARISC_LTOFF_TP14R	166
++#define R_PARISC_LTOFF_TP14F	167
++#define R_PARISC_TPREL64	216
++#define R_PARISC_TPREL14WR	219
++#define R_PARISC_TPREL14DR	220
++#define R_PARISC_TPREL16F	221
++#define R_PARISC_TPREL16WF	222
++#define R_PARISC_TPREL16DF	223
++#define R_PARISC_LTOFF_TP64	224
++#define R_PARISC_LTOFF_TP14WR	227
++#define R_PARISC_LTOFF_TP14DR	228
++#define R_PARISC_LTOFF_TP16F	229
++#define R_PARISC_LTOFF_TP16WF	230
++#define R_PARISC_LTOFF_TP16DF	231
++#define R_PARISC_GNU_VTENTRY	232
++#define R_PARISC_GNU_VTINHERIT	233
++#define R_PARISC_TLS_GD21L	234
++#define R_PARISC_TLS_GD14R	235
++#define R_PARISC_TLS_GDCALL	236
++#define R_PARISC_TLS_LDM21L	237
++#define R_PARISC_TLS_LDM14R	238
++#define R_PARISC_TLS_LDMCALL	239
++#define R_PARISC_TLS_LDO21L	240
++#define R_PARISC_TLS_LDO14R	241
++#define R_PARISC_TLS_DTPMOD32	242
++#define R_PARISC_TLS_DTPMOD64	243
++#define R_PARISC_TLS_DTPOFF32	244
++#define R_PARISC_TLS_DTPOFF64	245
++#define R_PARISC_TLS_LE21L	R_PARISC_TPREL21L
++#define R_PARISC_TLS_LE14R	R_PARISC_TPREL14R
++#define R_PARISC_TLS_IE21L	R_PARISC_LTOFF_TP21L
++#define R_PARISC_TLS_IE14R	R_PARISC_LTOFF_TP14R
++#define R_PARISC_TLS_TPREL32	R_PARISC_TPREL32
++#define R_PARISC_TLS_TPREL64	R_PARISC_TPREL64
++#define R_PARISC_HIRESERVE	255
++
++
++
++#define PT_HP_TLS		(PT_LOOS + 0x0)
++#define PT_HP_CORE_NONE		(PT_LOOS + 0x1)
++#define PT_HP_CORE_VERSION	(PT_LOOS + 0x2)
++#define PT_HP_CORE_KERNEL	(PT_LOOS + 0x3)
++#define PT_HP_CORE_COMM		(PT_LOOS + 0x4)
++#define PT_HP_CORE_PROC		(PT_LOOS + 0x5)
++#define PT_HP_CORE_LOADABLE	(PT_LOOS + 0x6)
++#define PT_HP_CORE_STACK	(PT_LOOS + 0x7)
++#define PT_HP_CORE_SHM		(PT_LOOS + 0x8)
++#define PT_HP_CORE_MMF		(PT_LOOS + 0x9)
++#define PT_HP_PARALLEL		(PT_LOOS + 0x10)
++#define PT_HP_FASTBIND		(PT_LOOS + 0x11)
++#define PT_HP_OPT_ANNOT		(PT_LOOS + 0x12)
++#define PT_HP_HSL_ANNOT		(PT_LOOS + 0x13)
++#define PT_HP_STACK		(PT_LOOS + 0x14)
++
++#define PT_PARISC_ARCHEXT	0x70000000
++#define PT_PARISC_UNWIND	0x70000001
++
++
++
++#define PF_PARISC_SBP		0x08000000
++
++#define PF_HP_PAGE_SIZE		0x00100000
++#define PF_HP_FAR_SHARED	0x00200000
++#define PF_HP_NEAR_SHARED	0x00400000
++#define PF_HP_CODE		0x01000000
++#define PF_HP_MODIFY		0x02000000
++#define PF_HP_LAZYSWAP		0x04000000
++#define PF_HP_SBP		0x08000000
++
++
++
++
++
++
++#define EF_ALPHA_32BIT		1
++#define EF_ALPHA_CANRELAX	2
++
++
++
++
++#define SHT_ALPHA_DEBUG		0x70000001
++#define SHT_ALPHA_REGINFO	0x70000002
++
++
++
++#define SHF_ALPHA_GPREL		0x10000000
++
++
++#define STO_ALPHA_NOPV		0x80
++#define STO_ALPHA_STD_GPLOAD	0x88
++
++
++
++#define R_ALPHA_NONE		0
++#define R_ALPHA_REFLONG		1
++#define R_ALPHA_REFQUAD		2
++#define R_ALPHA_GPREL32		3
++#define R_ALPHA_LITERAL		4
++#define R_ALPHA_LITUSE		5
++#define R_ALPHA_GPDISP		6
++#define R_ALPHA_BRADDR		7
++#define R_ALPHA_HINT		8
++#define R_ALPHA_SREL16		9
++#define R_ALPHA_SREL32		10
++#define R_ALPHA_SREL64		11
++#define R_ALPHA_GPRELHIGH	17
++#define R_ALPHA_GPRELLOW	18
++#define R_ALPHA_GPREL16		19
++#define R_ALPHA_COPY		24
++#define R_ALPHA_GLOB_DAT	25
++#define R_ALPHA_JMP_SLOT	26
++#define R_ALPHA_RELATIVE	27
++#define R_ALPHA_TLS_GD_HI	28
++#define R_ALPHA_TLSGD		29
++#define R_ALPHA_TLS_LDM		30
++#define R_ALPHA_DTPMOD64	31
++#define R_ALPHA_GOTDTPREL	32
++#define R_ALPHA_DTPREL64	33
++#define R_ALPHA_DTPRELHI	34
++#define R_ALPHA_DTPRELLO	35
++#define R_ALPHA_DTPREL16	36
++#define R_ALPHA_GOTTPREL	37
++#define R_ALPHA_TPREL64		38
++#define R_ALPHA_TPRELHI		39
++#define R_ALPHA_TPRELLO		40
++#define R_ALPHA_TPREL16		41
++
++#define R_ALPHA_NUM		46
++
++
++#define LITUSE_ALPHA_ADDR	0
++#define LITUSE_ALPHA_BASE	1
++#define LITUSE_ALPHA_BYTOFF	2
++#define LITUSE_ALPHA_JSR	3
++#define LITUSE_ALPHA_TLS_GD	4
++#define LITUSE_ALPHA_TLS_LDM	5
++
++
++#define DT_ALPHA_PLTRO		(DT_LOPROC + 0)
++#define DT_ALPHA_NUM		1
++
++
++
++
++#define EF_PPC_EMB		0x80000000
++
++
++#define EF_PPC_RELOCATABLE	0x00010000
++#define EF_PPC_RELOCATABLE_LIB	0x00008000
++
++
++
++#define R_PPC_NONE		0
++#define R_PPC_ADDR32		1
++#define R_PPC_ADDR24		2
++#define R_PPC_ADDR16		3
++#define R_PPC_ADDR16_LO		4
++#define R_PPC_ADDR16_HI		5
++#define R_PPC_ADDR16_HA		6
++#define R_PPC_ADDR14		7
++#define R_PPC_ADDR14_BRTAKEN	8
++#define R_PPC_ADDR14_BRNTAKEN	9
++#define R_PPC_REL24		10
++#define R_PPC_REL14		11
++#define R_PPC_REL14_BRTAKEN	12
++#define R_PPC_REL14_BRNTAKEN	13
++#define R_PPC_GOT16		14
++#define R_PPC_GOT16_LO		15
++#define R_PPC_GOT16_HI		16
++#define R_PPC_GOT16_HA		17
++#define R_PPC_PLTREL24		18
++#define R_PPC_COPY		19
++#define R_PPC_GLOB_DAT		20
++#define R_PPC_JMP_SLOT		21
++#define R_PPC_RELATIVE		22
++#define R_PPC_LOCAL24PC		23
++#define R_PPC_UADDR32		24
++#define R_PPC_UADDR16		25
++#define R_PPC_REL32		26
++#define R_PPC_PLT32		27
++#define R_PPC_PLTREL32		28
++#define R_PPC_PLT16_LO		29
++#define R_PPC_PLT16_HI		30
++#define R_PPC_PLT16_HA		31
++#define R_PPC_SDAREL16		32
++#define R_PPC_SECTOFF		33
++#define R_PPC_SECTOFF_LO	34
++#define R_PPC_SECTOFF_HI	35
++#define R_PPC_SECTOFF_HA	36
++
++
++#define R_PPC_TLS		67
++#define R_PPC_DTPMOD32		68
++#define R_PPC_TPREL16		69
++#define R_PPC_TPREL16_LO	70
++#define R_PPC_TPREL16_HI	71
++#define R_PPC_TPREL16_HA	72
++#define R_PPC_TPREL32		73
++#define R_PPC_DTPREL16		74
++#define R_PPC_DTPREL16_LO	75
++#define R_PPC_DTPREL16_HI	76
++#define R_PPC_DTPREL16_HA	77
++#define R_PPC_DTPREL32		78
++#define R_PPC_GOT_TLSGD16	79
++#define R_PPC_GOT_TLSGD16_LO	80
++#define R_PPC_GOT_TLSGD16_HI	81
++#define R_PPC_GOT_TLSGD16_HA	82
++#define R_PPC_GOT_TLSLD16	83
++#define R_PPC_GOT_TLSLD16_LO	84
++#define R_PPC_GOT_TLSLD16_HI	85
++#define R_PPC_GOT_TLSLD16_HA	86
++#define R_PPC_GOT_TPREL16	87
++#define R_PPC_GOT_TPREL16_LO	88
++#define R_PPC_GOT_TPREL16_HI	89
++#define R_PPC_GOT_TPREL16_HA	90
++#define R_PPC_GOT_DTPREL16	91
++#define R_PPC_GOT_DTPREL16_LO	92
++#define R_PPC_GOT_DTPREL16_HI	93
++#define R_PPC_GOT_DTPREL16_HA	94
++
++
++
++#define R_PPC_EMB_NADDR32	101
++#define R_PPC_EMB_NADDR16	102
++#define R_PPC_EMB_NADDR16_LO	103
++#define R_PPC_EMB_NADDR16_HI	104
++#define R_PPC_EMB_NADDR16_HA	105
++#define R_PPC_EMB_SDAI16	106
++#define R_PPC_EMB_SDA2I16	107
++#define R_PPC_EMB_SDA2REL	108
++#define R_PPC_EMB_SDA21		109
++#define R_PPC_EMB_MRKREF	110
++#define R_PPC_EMB_RELSEC16	111
++#define R_PPC_EMB_RELST_LO	112
++#define R_PPC_EMB_RELST_HI	113
++#define R_PPC_EMB_RELST_HA	114
++#define R_PPC_EMB_BIT_FLD	115
++#define R_PPC_EMB_RELSDA	116
++
++
++#define R_PPC_DIAB_SDA21_LO	180
++#define R_PPC_DIAB_SDA21_HI	181
++#define R_PPC_DIAB_SDA21_HA	182
++#define R_PPC_DIAB_RELSDA_LO	183
++#define R_PPC_DIAB_RELSDA_HI	184
++#define R_PPC_DIAB_RELSDA_HA	185
++
++
++#define R_PPC_IRELATIVE		248
++
++
++#define R_PPC_REL16		249
++#define R_PPC_REL16_LO		250
++#define R_PPC_REL16_HI		251
++#define R_PPC_REL16_HA		252
++
++
++
++#define R_PPC_TOC16		255
++
++
++#define DT_PPC_GOT		(DT_LOPROC + 0)
++#define DT_PPC_NUM		1
++
++
++#define R_PPC64_NONE		R_PPC_NONE
++#define R_PPC64_ADDR32		R_PPC_ADDR32
++#define R_PPC64_ADDR24		R_PPC_ADDR24
++#define R_PPC64_ADDR16		R_PPC_ADDR16
++#define R_PPC64_ADDR16_LO	R_PPC_ADDR16_LO
++#define R_PPC64_ADDR16_HI	R_PPC_ADDR16_HI
++#define R_PPC64_ADDR16_HA	R_PPC_ADDR16_HA
++#define R_PPC64_ADDR14		R_PPC_ADDR14
++#define R_PPC64_ADDR14_BRTAKEN	R_PPC_ADDR14_BRTAKEN
++#define R_PPC64_ADDR14_BRNTAKEN	R_PPC_ADDR14_BRNTAKEN
++#define R_PPC64_REL24		R_PPC_REL24
++#define R_PPC64_REL14		R_PPC_REL14
++#define R_PPC64_REL14_BRTAKEN	R_PPC_REL14_BRTAKEN
++#define R_PPC64_REL14_BRNTAKEN	R_PPC_REL14_BRNTAKEN
++#define R_PPC64_GOT16		R_PPC_GOT16
++#define R_PPC64_GOT16_LO	R_PPC_GOT16_LO
++#define R_PPC64_GOT16_HI	R_PPC_GOT16_HI
++#define R_PPC64_GOT16_HA	R_PPC_GOT16_HA
++
++#define R_PPC64_COPY		R_PPC_COPY
++#define R_PPC64_GLOB_DAT	R_PPC_GLOB_DAT
++#define R_PPC64_JMP_SLOT	R_PPC_JMP_SLOT
++#define R_PPC64_RELATIVE	R_PPC_RELATIVE
++
++#define R_PPC64_UADDR32		R_PPC_UADDR32
++#define R_PPC64_UADDR16		R_PPC_UADDR16
++#define R_PPC64_REL32		R_PPC_REL32
++#define R_PPC64_PLT32		R_PPC_PLT32
++#define R_PPC64_PLTREL32	R_PPC_PLTREL32
++#define R_PPC64_PLT16_LO	R_PPC_PLT16_LO
++#define R_PPC64_PLT16_HI	R_PPC_PLT16_HI
++#define R_PPC64_PLT16_HA	R_PPC_PLT16_HA
++
++#define R_PPC64_SECTOFF		R_PPC_SECTOFF
++#define R_PPC64_SECTOFF_LO	R_PPC_SECTOFF_LO
++#define R_PPC64_SECTOFF_HI	R_PPC_SECTOFF_HI
++#define R_PPC64_SECTOFF_HA	R_PPC_SECTOFF_HA
++#define R_PPC64_ADDR30		37
++#define R_PPC64_ADDR64		38
++#define R_PPC64_ADDR16_HIGHER	39
++#define R_PPC64_ADDR16_HIGHERA	40
++#define R_PPC64_ADDR16_HIGHEST	41
++#define R_PPC64_ADDR16_HIGHESTA	42
++#define R_PPC64_UADDR64		43
++#define R_PPC64_REL64		44
++#define R_PPC64_PLT64		45
++#define R_PPC64_PLTREL64	46
++#define R_PPC64_TOC16		47
++#define R_PPC64_TOC16_LO	48
++#define R_PPC64_TOC16_HI	49
++#define R_PPC64_TOC16_HA	50
++#define R_PPC64_TOC		51
++#define R_PPC64_PLTGOT16	52
++#define R_PPC64_PLTGOT16_LO	53
++#define R_PPC64_PLTGOT16_HI	54
++#define R_PPC64_PLTGOT16_HA	55
++
++#define R_PPC64_ADDR16_DS	56
++#define R_PPC64_ADDR16_LO_DS	57
++#define R_PPC64_GOT16_DS	58
++#define R_PPC64_GOT16_LO_DS	59
++#define R_PPC64_PLT16_LO_DS	60
++#define R_PPC64_SECTOFF_DS	61
++#define R_PPC64_SECTOFF_LO_DS	62
++#define R_PPC64_TOC16_DS	63
++#define R_PPC64_TOC16_LO_DS	64
++#define R_PPC64_PLTGOT16_DS	65
++#define R_PPC64_PLTGOT16_LO_DS	66
++
++
++#define R_PPC64_TLS		67
++#define R_PPC64_DTPMOD64	68
++#define R_PPC64_TPREL16		69
++#define R_PPC64_TPREL16_LO	70
++#define R_PPC64_TPREL16_HI	71
++#define R_PPC64_TPREL16_HA	72
++#define R_PPC64_TPREL64		73
++#define R_PPC64_DTPREL16	74
++#define R_PPC64_DTPREL16_LO	75
++#define R_PPC64_DTPREL16_HI	76
++#define R_PPC64_DTPREL16_HA	77
++#define R_PPC64_DTPREL64	78
++#define R_PPC64_GOT_TLSGD16	79
++#define R_PPC64_GOT_TLSGD16_LO	80
++#define R_PPC64_GOT_TLSGD16_HI	81
++#define R_PPC64_GOT_TLSGD16_HA	82
++#define R_PPC64_GOT_TLSLD16	83
++#define R_PPC64_GOT_TLSLD16_LO	84
++#define R_PPC64_GOT_TLSLD16_HI	85
++#define R_PPC64_GOT_TLSLD16_HA	86
++#define R_PPC64_GOT_TPREL16_DS	87
++#define R_PPC64_GOT_TPREL16_LO_DS 88
++#define R_PPC64_GOT_TPREL16_HI	89
++#define R_PPC64_GOT_TPREL16_HA	90
++#define R_PPC64_GOT_DTPREL16_DS	91
++#define R_PPC64_GOT_DTPREL16_LO_DS 92
++#define R_PPC64_GOT_DTPREL16_HI	93
++#define R_PPC64_GOT_DTPREL16_HA	94
++#define R_PPC64_TPREL16_DS	95
++#define R_PPC64_TPREL16_LO_DS	96
++#define R_PPC64_TPREL16_HIGHER	97
++#define R_PPC64_TPREL16_HIGHERA	98
++#define R_PPC64_TPREL16_HIGHEST	99
++#define R_PPC64_TPREL16_HIGHESTA 100
++#define R_PPC64_DTPREL16_DS	101
++#define R_PPC64_DTPREL16_LO_DS	102
++#define R_PPC64_DTPREL16_HIGHER	103
++#define R_PPC64_DTPREL16_HIGHERA 104
++#define R_PPC64_DTPREL16_HIGHEST 105
++#define R_PPC64_DTPREL16_HIGHESTA 106
++
++
++#define R_PPC64_JMP_IREL	247
++#define R_PPC64_IRELATIVE	248
++#define R_PPC64_REL16		249
++#define R_PPC64_REL16_LO	250
++#define R_PPC64_REL16_HI	251
++#define R_PPC64_REL16_HA	252
++
++
++#define DT_PPC64_GLINK  (DT_LOPROC + 0)
++#define DT_PPC64_OPD	(DT_LOPROC + 1)
++#define DT_PPC64_OPDSZ	(DT_LOPROC + 2)
++#define DT_PPC64_NUM    3
++
++
++
++
++
++#define EF_ARM_RELEXEC		0x01
++#define EF_ARM_HASENTRY		0x02
++#define EF_ARM_INTERWORK	0x04
++#define EF_ARM_APCS_26		0x08
++#define EF_ARM_APCS_FLOAT	0x10
++#define EF_ARM_PIC		0x20
++#define EF_ARM_ALIGN8		0x40
++#define EF_ARM_NEW_ABI		0x80
++#define EF_ARM_OLD_ABI		0x100
++#define EF_ARM_SOFT_FLOAT	0x200
++#define EF_ARM_VFP_FLOAT	0x400
++#define EF_ARM_MAVERICK_FLOAT	0x800
++
++#define EF_ARM_ABI_FLOAT_SOFT	0x200
++#define EF_ARM_ABI_FLOAT_HARD	0x400
++
++
++#define EF_ARM_SYMSARESORTED	0x04
++#define EF_ARM_DYNSYMSUSESEGIDX	0x08
++#define EF_ARM_MAPSYMSFIRST	0x10
++#define EF_ARM_EABIMASK		0XFF000000
++
++
++#define EF_ARM_BE8	    0x00800000
++#define EF_ARM_LE8	    0x00400000
++
++#define EF_ARM_EABI_VERSION(flags)	((flags) & EF_ARM_EABIMASK)
++#define EF_ARM_EABI_UNKNOWN	0x00000000
++#define EF_ARM_EABI_VER1	0x01000000
++#define EF_ARM_EABI_VER2	0x02000000
++#define EF_ARM_EABI_VER3	0x03000000
++#define EF_ARM_EABI_VER4	0x04000000
++#define EF_ARM_EABI_VER5	0x05000000
++
++
++#define STT_ARM_TFUNC		STT_LOPROC
++#define STT_ARM_16BIT		STT_HIPROC
++
++
++#define SHF_ARM_ENTRYSECT	0x10000000
++#define SHF_ARM_COMDEF		0x80000000
++
++
++
++#define PF_ARM_SB		0x10000000
++
++#define PF_ARM_PI		0x20000000
++#define PF_ARM_ABS		0x40000000
++
++
++#define PT_ARM_EXIDX		(PT_LOPROC + 1)
++
++
++#define SHT_ARM_EXIDX		(SHT_LOPROC + 1)
++#define SHT_ARM_PREEMPTMAP	(SHT_LOPROC + 2)
++#define SHT_ARM_ATTRIBUTES	(SHT_LOPROC + 3)
++
++
++#define R_AARCH64_NONE            0
++#define R_AARCH64_ABS64         257
++#define R_AARCH64_ABS32         258
++#define R_AARCH64_COPY         1024
++#define R_AARCH64_GLOB_DAT     1025
++#define R_AARCH64_JUMP_SLOT    1026
++#define R_AARCH64_RELATIVE     1027
++#define R_AARCH64_TLS_DTPMOD64 1028
++#define R_AARCH64_TLS_DTPREL64 1029
++#define R_AARCH64_TLS_TPREL64  1030
++#define R_AARCH64_TLSDESC      1031
++
++
++#define R_ARM_NONE		0
++#define R_ARM_PC24		1
++#define R_ARM_ABS32		2
++#define R_ARM_REL32		3
++#define R_ARM_PC13		4
++#define R_ARM_ABS16		5
++#define R_ARM_ABS12		6
++#define R_ARM_THM_ABS5		7
++#define R_ARM_ABS8		8
++#define R_ARM_SBREL32		9
++#define R_ARM_THM_PC22		10
++#define R_ARM_THM_PC8		11
++#define R_ARM_AMP_VCALL9	12
++#define R_ARM_TLS_DESC		13
++#define R_ARM_THM_SWI8		14
++#define R_ARM_XPC25		15
++#define R_ARM_THM_XPC22		16
++#define R_ARM_TLS_DTPMOD32	17
++#define R_ARM_TLS_DTPOFF32	18
++#define R_ARM_TLS_TPOFF32	19
++#define R_ARM_COPY		20
++#define R_ARM_GLOB_DAT		21
++#define R_ARM_JUMP_SLOT		22
++#define R_ARM_RELATIVE		23
++#define R_ARM_GOTOFF		24
++#define R_ARM_GOTPC		25
++#define R_ARM_GOT32		26
++#define R_ARM_PLT32		27
++#define R_ARM_CALL		28
++#define R_ARM_JUMP24		29
++#define R_ARM_THM_JUMP24	30
++#define R_ARM_BASE_ABS		31
++#define R_ARM_ALU_PCREL_7_0	32
++#define R_ARM_ALU_PCREL_15_8	33
++#define R_ARM_ALU_PCREL_23_15	34
++#define R_ARM_LDR_SBREL_11_0	35
++#define R_ARM_ALU_SBREL_19_12	36
++#define R_ARM_ALU_SBREL_27_20	37
++#define R_ARM_TARGET1		38
++#define R_ARM_SBREL31		39
++#define R_ARM_V4BX		40
++#define R_ARM_TARGET2		41
++#define R_ARM_PREL31		42
++#define R_ARM_MOVW_ABS_NC	43
++#define R_ARM_MOVT_ABS		44
++#define R_ARM_MOVW_PREL_NC	45
++#define R_ARM_MOVT_PREL		46
++#define R_ARM_THM_MOVW_ABS_NC	47
++#define R_ARM_THM_MOVT_ABS	48
++#define R_ARM_THM_MOVW_PREL_NC	49
++#define R_ARM_THM_MOVT_PREL	50
++#define R_ARM_THM_JUMP19	51
++#define R_ARM_THM_JUMP6		52
++#define R_ARM_THM_ALU_PREL_11_0	53
++#define R_ARM_THM_PC12		54
++#define R_ARM_ABS32_NOI		55
++#define R_ARM_REL32_NOI		56
++#define R_ARM_ALU_PC_G0_NC	57
++#define R_ARM_ALU_PC_G0		58
++#define R_ARM_ALU_PC_G1_NC	59
++#define R_ARM_ALU_PC_G1		60
++#define R_ARM_ALU_PC_G2		61
++#define R_ARM_LDR_PC_G1		62
++#define R_ARM_LDR_PC_G2		63
++#define R_ARM_LDRS_PC_G0	64
++#define R_ARM_LDRS_PC_G1	65
++#define R_ARM_LDRS_PC_G2	66
++#define R_ARM_LDC_PC_G0		67
++#define R_ARM_LDC_PC_G1		68
++#define R_ARM_LDC_PC_G2		69
++#define R_ARM_ALU_SB_G0_NC	70
++#define R_ARM_ALU_SB_G0		71
++#define R_ARM_ALU_SB_G1_NC	72
++#define R_ARM_ALU_SB_G1		73
++#define R_ARM_ALU_SB_G2		74
++#define R_ARM_LDR_SB_G0		75
++#define R_ARM_LDR_SB_G1		76
++#define R_ARM_LDR_SB_G2		77
++#define R_ARM_LDRS_SB_G0	78
++#define R_ARM_LDRS_SB_G1	79
++#define R_ARM_LDRS_SB_G2	80
++#define R_ARM_LDC_SB_G0		81
++#define R_ARM_LDC_SB_G1		82
++#define R_ARM_LDC_SB_G2		83
++#define R_ARM_MOVW_BREL_NC	84
++#define R_ARM_MOVT_BREL		85
++#define R_ARM_MOVW_BREL		86
++#define R_ARM_THM_MOVW_BREL_NC	87
++#define R_ARM_THM_MOVT_BREL	88
++#define R_ARM_THM_MOVW_BREL	89
++#define R_ARM_TLS_GOTDESC	90
++#define R_ARM_TLS_CALL		91
++#define R_ARM_TLS_DESCSEQ	92
++#define R_ARM_THM_TLS_CALL	93
++#define R_ARM_PLT32_ABS		94
++#define R_ARM_GOT_ABS		95
++#define R_ARM_GOT_PREL		96
++#define R_ARM_GOT_BREL12	97
++#define R_ARM_GOTOFF12		98
++#define R_ARM_GOTRELAX		99
++#define R_ARM_GNU_VTENTRY	100
++#define R_ARM_GNU_VTINHERIT	101
++#define R_ARM_THM_PC11		102
++#define R_ARM_THM_PC9		103
++#define R_ARM_TLS_GD32		104
++
++#define R_ARM_TLS_LDM32		105
++
++#define R_ARM_TLS_LDO32		106
++
++#define R_ARM_TLS_IE32		107
++
++#define R_ARM_TLS_LE32		108
++#define R_ARM_TLS_LDO12		109
++#define R_ARM_TLS_LE12		110
++#define R_ARM_TLS_IE12GP	111
++#define R_ARM_ME_TOO		128
++#define R_ARM_THM_TLS_DESCSEQ	129
++#define R_ARM_THM_TLS_DESCSEQ16	129
++#define R_ARM_THM_TLS_DESCSEQ32	130
++#define R_ARM_THM_GOT_BREL12	131
++#define R_ARM_IRELATIVE		160
++#define R_ARM_RXPC25		249
++#define R_ARM_RSBREL32		250
++#define R_ARM_THM_RPC22		251
++#define R_ARM_RREL32		252
++#define R_ARM_RABS22		253
++#define R_ARM_RPC24		254
++#define R_ARM_RBASE		255
++
++#define R_ARM_NUM		256
++
++
++
++
++#define EF_IA_64_MASKOS		0x0000000f
++#define EF_IA_64_ABI64		0x00000010
++#define EF_IA_64_ARCH		0xff000000
++
++
++#define PT_IA_64_ARCHEXT	(PT_LOPROC + 0)
++#define PT_IA_64_UNWIND		(PT_LOPROC + 1)
++#define PT_IA_64_HP_OPT_ANOT	(PT_LOOS + 0x12)
++#define PT_IA_64_HP_HSL_ANOT	(PT_LOOS + 0x13)
++#define PT_IA_64_HP_STACK	(PT_LOOS + 0x14)
++
++
++#define PF_IA_64_NORECOV	0x80000000
++
++
++#define SHT_IA_64_EXT		(SHT_LOPROC + 0)
++#define SHT_IA_64_UNWIND	(SHT_LOPROC + 1)
++
++
++#define SHF_IA_64_SHORT		0x10000000
++#define SHF_IA_64_NORECOV	0x20000000
++
++
++#define DT_IA_64_PLT_RESERVE	(DT_LOPROC + 0)
++#define DT_IA_64_NUM		1
++
++
++#define R_IA64_NONE		0x00
++#define R_IA64_IMM14		0x21
++#define R_IA64_IMM22		0x22
++#define R_IA64_IMM64		0x23
++#define R_IA64_DIR32MSB		0x24
++#define R_IA64_DIR32LSB		0x25
++#define R_IA64_DIR64MSB		0x26
++#define R_IA64_DIR64LSB		0x27
++#define R_IA64_GPREL22		0x2a
++#define R_IA64_GPREL64I		0x2b
++#define R_IA64_GPREL32MSB	0x2c
++#define R_IA64_GPREL32LSB	0x2d
++#define R_IA64_GPREL64MSB	0x2e
++#define R_IA64_GPREL64LSB	0x2f
++#define R_IA64_LTOFF22		0x32
++#define R_IA64_LTOFF64I		0x33
++#define R_IA64_PLTOFF22		0x3a
++#define R_IA64_PLTOFF64I	0x3b
++#define R_IA64_PLTOFF64MSB	0x3e
++#define R_IA64_PLTOFF64LSB	0x3f
++#define R_IA64_FPTR64I		0x43
++#define R_IA64_FPTR32MSB	0x44
++#define R_IA64_FPTR32LSB	0x45
++#define R_IA64_FPTR64MSB	0x46
++#define R_IA64_FPTR64LSB	0x47
++#define R_IA64_PCREL60B		0x48
++#define R_IA64_PCREL21B		0x49
++#define R_IA64_PCREL21M		0x4a
++#define R_IA64_PCREL21F		0x4b
++#define R_IA64_PCREL32MSB	0x4c
++#define R_IA64_PCREL32LSB	0x4d
++#define R_IA64_PCREL64MSB	0x4e
++#define R_IA64_PCREL64LSB	0x4f
++#define R_IA64_LTOFF_FPTR22	0x52
++#define R_IA64_LTOFF_FPTR64I	0x53
++#define R_IA64_LTOFF_FPTR32MSB	0x54
++#define R_IA64_LTOFF_FPTR32LSB	0x55
++#define R_IA64_LTOFF_FPTR64MSB	0x56
++#define R_IA64_LTOFF_FPTR64LSB	0x57
++#define R_IA64_SEGREL32MSB	0x5c
++#define R_IA64_SEGREL32LSB	0x5d
++#define R_IA64_SEGREL64MSB	0x5e
++#define R_IA64_SEGREL64LSB	0x5f
++#define R_IA64_SECREL32MSB	0x64
++#define R_IA64_SECREL32LSB	0x65
++#define R_IA64_SECREL64MSB	0x66
++#define R_IA64_SECREL64LSB	0x67
++#define R_IA64_REL32MSB		0x6c
++#define R_IA64_REL32LSB		0x6d
++#define R_IA64_REL64MSB		0x6e
++#define R_IA64_REL64LSB		0x6f
++#define R_IA64_LTV32MSB		0x74
++#define R_IA64_LTV32LSB		0x75
++#define R_IA64_LTV64MSB		0x76
++#define R_IA64_LTV64LSB		0x77
++#define R_IA64_PCREL21BI	0x79
++#define R_IA64_PCREL22		0x7a
++#define R_IA64_PCREL64I		0x7b
++#define R_IA64_IPLTMSB		0x80
++#define R_IA64_IPLTLSB		0x81
++#define R_IA64_COPY		0x84
++#define R_IA64_SUB		0x85
++#define R_IA64_LTOFF22X		0x86
++#define R_IA64_LDXMOV		0x87
++#define R_IA64_TPREL14		0x91
++#define R_IA64_TPREL22		0x92
++#define R_IA64_TPREL64I		0x93
++#define R_IA64_TPREL64MSB	0x96
++#define R_IA64_TPREL64LSB	0x97
++#define R_IA64_LTOFF_TPREL22	0x9a
++#define R_IA64_DTPMOD64MSB	0xa6
++#define R_IA64_DTPMOD64LSB	0xa7
++#define R_IA64_LTOFF_DTPMOD22	0xaa
++#define R_IA64_DTPREL14		0xb1
++#define R_IA64_DTPREL22		0xb2
++#define R_IA64_DTPREL64I	0xb3
++#define R_IA64_DTPREL32MSB	0xb4
++#define R_IA64_DTPREL32LSB	0xb5
++#define R_IA64_DTPREL64MSB	0xb6
++#define R_IA64_DTPREL64LSB	0xb7
++#define R_IA64_LTOFF_DTPREL22	0xba
++
++
++
++
++#define	R_SH_NONE		0
++#define	R_SH_DIR32		1
++#define	R_SH_REL32		2
++#define	R_SH_DIR8WPN		3
++#define	R_SH_IND12W		4
++#define	R_SH_DIR8WPL		5
++#define	R_SH_DIR8WPZ		6
++#define	R_SH_DIR8BP		7
++#define	R_SH_DIR8W		8
++#define	R_SH_DIR8L		9
++#define	R_SH_SWITCH16		25
++#define	R_SH_SWITCH32		26
++#define	R_SH_USES		27
++#define	R_SH_COUNT		28
++#define	R_SH_ALIGN		29
++#define	R_SH_CODE		30
++#define	R_SH_DATA		31
++#define	R_SH_LABEL		32
++#define	R_SH_SWITCH8		33
++#define	R_SH_GNU_VTINHERIT	34
++#define	R_SH_GNU_VTENTRY	35
++#define	R_SH_TLS_GD_32		144
++#define	R_SH_TLS_LD_32		145
++#define	R_SH_TLS_LDO_32		146
++#define	R_SH_TLS_IE_32		147
++#define	R_SH_TLS_LE_32		148
++#define	R_SH_TLS_DTPMOD32	149
++#define	R_SH_TLS_DTPOFF32	150
++#define	R_SH_TLS_TPOFF32	151
++#define	R_SH_GOT32		160
++#define	R_SH_PLT32		161
++#define	R_SH_COPY		162
++#define	R_SH_GLOB_DAT		163
++#define	R_SH_JMP_SLOT		164
++#define	R_SH_RELATIVE		165
++#define	R_SH_GOTOFF		166
++#define	R_SH_GOTPC		167
++
++#define	R_SH_NUM		256
++
++
++
++#define R_390_NONE		0
++#define R_390_8			1
++#define R_390_12		2
++#define R_390_16		3
++#define R_390_32		4
++#define R_390_PC32		5
++#define R_390_GOT12		6
++#define R_390_GOT32		7
++#define R_390_PLT32		8
++#define R_390_COPY		9
++#define R_390_GLOB_DAT		10
++#define R_390_JMP_SLOT		11
++#define R_390_RELATIVE		12
++#define R_390_GOTOFF32		13
++#define R_390_GOTPC		14
++#define R_390_GOT16		15
++#define R_390_PC16		16
++#define R_390_PC16DBL		17
++#define R_390_PLT16DBL		18
++#define R_390_PC32DBL		19
++#define R_390_PLT32DBL		20
++#define R_390_GOTPCDBL		21
++#define R_390_64		22
++#define R_390_PC64		23
++#define R_390_GOT64		24
++#define R_390_PLT64		25
++#define R_390_GOTENT		26
++#define R_390_GOTOFF16		27
++#define R_390_GOTOFF64		28
++#define R_390_GOTPLT12		29
++#define R_390_GOTPLT16		30
++#define R_390_GOTPLT32		31
++#define R_390_GOTPLT64		32
++#define R_390_GOTPLTENT		33
++#define R_390_PLTOFF16		34
++#define R_390_PLTOFF32		35
++#define R_390_PLTOFF64		36
++#define R_390_TLS_LOAD		37
++#define R_390_TLS_GDCALL	38
++
++#define R_390_TLS_LDCALL	39
++
++#define R_390_TLS_GD32		40
++
++#define R_390_TLS_GD64		41
++
++#define R_390_TLS_GOTIE12	42
++
++#define R_390_TLS_GOTIE32	43
++
++#define R_390_TLS_GOTIE64	44
++
++#define R_390_TLS_LDM32		45
++
++#define R_390_TLS_LDM64		46
++
++#define R_390_TLS_IE32		47
++
++#define R_390_TLS_IE64		48
++
++#define R_390_TLS_IEENT		49
++
++#define R_390_TLS_LE32		50
++
++#define R_390_TLS_LE64		51
++
++#define R_390_TLS_LDO32		52
++
++#define R_390_TLS_LDO64		53
++
++#define R_390_TLS_DTPMOD	54
++#define R_390_TLS_DTPOFF	55
++#define R_390_TLS_TPOFF		56
++
++#define R_390_20		57
++#define R_390_GOT20		58
++#define R_390_GOTPLT20		59
++#define R_390_TLS_GOTIE20	60
++
++
++#define R_390_NUM		61
++
++
++
++#define R_CRIS_NONE		0
++#define R_CRIS_8		1
++#define R_CRIS_16		2
++#define R_CRIS_32		3
++#define R_CRIS_8_PCREL		4
++#define R_CRIS_16_PCREL		5
++#define R_CRIS_32_PCREL		6
++#define R_CRIS_GNU_VTINHERIT	7
++#define R_CRIS_GNU_VTENTRY	8
++#define R_CRIS_COPY		9
++#define R_CRIS_GLOB_DAT		10
++#define R_CRIS_JUMP_SLOT	11
++#define R_CRIS_RELATIVE		12
++#define R_CRIS_16_GOT		13
++#define R_CRIS_32_GOT		14
++#define R_CRIS_16_GOTPLT	15
++#define R_CRIS_32_GOTPLT	16
++#define R_CRIS_32_GOTREL	17
++#define R_CRIS_32_PLT_GOTREL	18
++#define R_CRIS_32_PLT_PCREL	19
++
++#define R_CRIS_NUM		20
++
++
++
++#define R_X86_64_NONE		0
++#define R_X86_64_64		1
++#define R_X86_64_PC32		2
++#define R_X86_64_GOT32		3
++#define R_X86_64_PLT32		4
++#define R_X86_64_COPY		5
++#define R_X86_64_GLOB_DAT	6
++#define R_X86_64_JUMP_SLOT	7
++#define R_X86_64_RELATIVE	8
++#define R_X86_64_GOTPCREL	9
++
++#define R_X86_64_32		10
++#define R_X86_64_32S		11
++#define R_X86_64_16		12
++#define R_X86_64_PC16		13
++#define R_X86_64_8		14
++#define R_X86_64_PC8		15
++#define R_X86_64_DTPMOD64	16
++#define R_X86_64_DTPOFF64	17
++#define R_X86_64_TPOFF64	18
++#define R_X86_64_TLSGD		19
++
++#define R_X86_64_TLSLD		20
++
++#define R_X86_64_DTPOFF32	21
++#define R_X86_64_GOTTPOFF	22
++
++#define R_X86_64_TPOFF32	23
++#define R_X86_64_PC64		24
++#define R_X86_64_GOTOFF64	25
++#define R_X86_64_GOTPC32	26
++#define R_X86_64_GOT64		27
++#define R_X86_64_GOTPCREL64	28
++#define R_X86_64_GOTPC64	29
++#define R_X86_64_GOTPLT64	30
++#define R_X86_64_PLTOFF64	31
++#define R_X86_64_SIZE32		32
++#define R_X86_64_SIZE64		33
++
++#define R_X86_64_GOTPC32_TLSDESC 34
++#define R_X86_64_TLSDESC_CALL   35
++
++#define R_X86_64_TLSDESC        36
++#define R_X86_64_IRELATIVE	37
++#define R_X86_64_RELATIVE64	38
++#define R_X86_64_NUM		39
++
++
++
++#define R_MN10300_NONE		0
++#define R_MN10300_32		1
++#define R_MN10300_16		2
++#define R_MN10300_8		3
++#define R_MN10300_PCREL32	4
++#define R_MN10300_PCREL16	5
++#define R_MN10300_PCREL8	6
++#define R_MN10300_GNU_VTINHERIT	7
++#define R_MN10300_GNU_VTENTRY	8
++#define R_MN10300_24		9
++#define R_MN10300_GOTPC32	10
++#define R_MN10300_GOTPC16	11
++#define R_MN10300_GOTOFF32	12
++#define R_MN10300_GOTOFF24	13
++#define R_MN10300_GOTOFF16	14
++#define R_MN10300_PLT32		15
++#define R_MN10300_PLT16		16
++#define R_MN10300_GOT32		17
++#define R_MN10300_GOT24		18
++#define R_MN10300_GOT16		19
++#define R_MN10300_COPY		20
++#define R_MN10300_GLOB_DAT	21
++#define R_MN10300_JMP_SLOT	22
++#define R_MN10300_RELATIVE	23
++
++#define R_MN10300_NUM		24
++
++
++
++#define R_M32R_NONE		0
++#define R_M32R_16		1
++#define R_M32R_32		2
++#define R_M32R_24		3
++#define R_M32R_10_PCREL		4
++#define R_M32R_18_PCREL		5
++#define R_M32R_26_PCREL		6
++#define R_M32R_HI16_ULO		7
++#define R_M32R_HI16_SLO		8
++#define R_M32R_LO16		9
++#define R_M32R_SDA16		10
++#define R_M32R_GNU_VTINHERIT	11
++#define R_M32R_GNU_VTENTRY	12
++
++#define R_M32R_16_RELA		33
++#define R_M32R_32_RELA		34
++#define R_M32R_24_RELA		35
++#define R_M32R_10_PCREL_RELA	36
++#define R_M32R_18_PCREL_RELA	37
++#define R_M32R_26_PCREL_RELA	38
++#define R_M32R_HI16_ULO_RELA	39
++#define R_M32R_HI16_SLO_RELA	40
++#define R_M32R_LO16_RELA	41
++#define R_M32R_SDA16_RELA	42
++#define R_M32R_RELA_GNU_VTINHERIT	43
++#define R_M32R_RELA_GNU_VTENTRY	44
++#define R_M32R_REL32		45
++
++#define R_M32R_GOT24		48
++#define R_M32R_26_PLTREL	49
++#define R_M32R_COPY		50
++#define R_M32R_GLOB_DAT		51
++#define R_M32R_JMP_SLOT		52
++#define R_M32R_RELATIVE		53
++#define R_M32R_GOTOFF		54
++#define R_M32R_GOTPC24		55
++#define R_M32R_GOT16_HI_ULO	56
++
++#define R_M32R_GOT16_HI_SLO	57
++
++#define R_M32R_GOT16_LO		58
++#define R_M32R_GOTPC_HI_ULO	59
++
++#define R_M32R_GOTPC_HI_SLO	60
++
++#define R_M32R_GOTPC_LO		61
++
++#define R_M32R_GOTOFF_HI_ULO	62
++
++#define R_M32R_GOTOFF_HI_SLO	63
++
++#define R_M32R_GOTOFF_LO	64
++#define R_M32R_NUM		256
++
++#define R_MICROBLAZE_NONE 0
++#define R_MICROBLAZE_32 1
++#define R_MICROBLAZE_32_PCREL 2
++#define R_MICROBLAZE_64_PCREL 3
++#define R_MICROBLAZE_32_PCREL_LO 4
++#define R_MICROBLAZE_64 5
++#define R_MICROBLAZE_32_LO 6
++#define R_MICROBLAZE_SRO32 7
++#define R_MICROBLAZE_SRW32 8
++#define R_MICROBLAZE_64_NONE 9
++#define R_MICROBLAZE_32_SYM_OP_SYM 10
++#define R_MICROBLAZE_GNU_VTINHERIT 11
++#define R_MICROBLAZE_GNU_VTENTRY 12
++#define R_MICROBLAZE_GOTPC_64 13
++#define R_MICROBLAZE_GOT_64 14
++#define R_MICROBLAZE_PLT_64 15
++#define R_MICROBLAZE_REL 16
++#define R_MICROBLAZE_JUMP_SLOT 17
++#define R_MICROBLAZE_GLOB_DAT 18
++#define R_MICROBLAZE_GOTOFF_64 19
++#define R_MICROBLAZE_GOTOFF_32 20
++#define R_MICROBLAZE_COPY 21
++#define R_MICROBLAZE_TLS 22
++#define R_MICROBLAZE_TLSGD 23
++#define R_MICROBLAZE_TLSLD 24
++#define R_MICROBLAZE_TLSDTPMOD32 25
++#define R_MICROBLAZE_TLSDTPREL32 26
++#define R_MICROBLAZE_TLSDTPREL64 27
++#define R_MICROBLAZE_TLSGOTTPREL32 28
++#define R_MICROBLAZE_TLSTPREL32	 29
++
++#ifdef __cplusplus
++}
++#endif
++
++
++#endif
diff --git a/toolchain/kernel-headers/patches/3.12.6/sgidefs.patch b/toolchain/kernel-headers/patches/3.12.6/sgidefs.patch
new file mode 100644
index 000000000..f00a284d9
--- /dev/null
+++ b/toolchain/kernel-headers/patches/3.12.6/sgidefs.patch
@@ -0,0 +1,18 @@
+diff -Nur linux-3.11.5.orig/arch/mips/include/uapi/asm/sgidefs.h linux-3.11.5/arch/mips/include/uapi/asm/sgidefs.h
+--- linux-3.11.5.orig/arch/mips/include/uapi/asm/sgidefs.h	2013-10-14 03:14:45.000000000 +0200
++++ linux-3.11.5/arch/mips/include/uapi/asm/sgidefs.h	2013-11-08 22:01:28.000000000 +0100
+@@ -11,14 +11,6 @@
+ #define __ASM_SGIDEFS_H
+ 
+ /*
+- * Using a Linux compiler for building Linux seems logic but not to
+- * everybody.
+- */
+-#ifndef __linux__
+-#error Use a Linux compiler or give up.
+-#endif
+-
+-/*
+  * Definitions for the ISA levels
+  *
+  * With the introduction of MIPS32 / MIPS64 instruction sets definitions
diff --git a/toolchain/kernel-headers/patches/3.12.6/sortext.patch b/toolchain/kernel-headers/patches/3.12.6/sortext.patch
new file mode 100644
index 000000000..8fd4e1d6b
--- /dev/null
+++ b/toolchain/kernel-headers/patches/3.12.6/sortext.patch
@@ -0,0 +1,33 @@
+diff -Nur linux-3.12.6.orig/arch/arm/Kconfig linux-3.12.6/arch/arm/Kconfig
+--- linux-3.12.6.orig/arch/arm/Kconfig	2013-12-20 16:51:33.000000000 +0100
++++ linux-3.12.6/arch/arm/Kconfig	2013-12-28 19:29:33.000000000 +0100
+@@ -6,7 +6,6 @@
+ 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
+ 	select ARCH_HAVE_CUSTOM_GPIO_H
+ 	select ARCH_WANT_IPC_PARSE_VERSION
+-	select BUILDTIME_EXTABLE_SORT if MMU
+ 	select CLONE_BACKWARDS
+ 	select CPU_PM if (SUSPEND || CPU_IDLE)
+ 	select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN && MMU
+diff -Nur linux-3.12.6.orig/arch/mips/Kconfig linux-3.12.6/arch/mips/Kconfig
+--- linux-3.12.6.orig/arch/mips/Kconfig	2013-12-20 16:51:33.000000000 +0100
++++ linux-3.12.6/arch/mips/Kconfig	2013-12-28 19:30:06.000000000 +0100
+@@ -35,7 +35,6 @@
+ 	select HAVE_MEMBLOCK_NODE_MAP
+ 	select ARCH_DISCARD_MEMBLOCK
+ 	select GENERIC_SMP_IDLE_THREAD
+-	select BUILDTIME_EXTABLE_SORT
+ 	select GENERIC_CLOCKEVENTS
+ 	select GENERIC_CMOS_UPDATE
+ 	select HAVE_MOD_ARCH_SPECIFIC
+diff -Nur linux-3.12.6.orig/arch/x86/Kconfig linux-3.12.6/arch/x86/Kconfig
+--- linux-3.12.6.orig/arch/x86/Kconfig	2013-12-20 16:51:33.000000000 +0100
++++ linux-3.12.6/arch/x86/Kconfig	2013-12-28 19:29:50.000000000 +0100
+@@ -100,7 +100,6 @@
+ 	select GENERIC_SMP_IDLE_THREAD
+ 	select ARCH_WANT_IPC_PARSE_VERSION if X86_32
+ 	select HAVE_ARCH_SECCOMP_FILTER
+-	select BUILDTIME_EXTABLE_SORT
+ 	select GENERIC_CMOS_UPDATE
+ 	select HAVE_ARCH_SOFT_DIRTY
+ 	select CLOCKSOURCE_WATCHDOG