summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--target/Config.in1
-rw-r--r--target/wag54g/patches/ar7.patch977
-rw-r--r--target/wag54g/uclibc.config21
3 files changed, 320 insertions, 679 deletions
diff --git a/target/Config.in b/target/Config.in
index 1db490b1b..21a8bf13f 100644
--- a/target/Config.in
+++ b/target/Config.in
@@ -344,7 +344,6 @@ config ADK_TARGET_LIB_GLIBC
ADK_LINUX_MIPS64EL_QEMU || \
ADK_LINUX_X86_ALIX1C || \
ADK_LINUX_MIPS_RB411 || \
- ADK_LINUX_MIPS_RB532 || \
ADK_LINUX_RESCUE || \
ADK_LINUX_MIPS64_LEMOTE
help
diff --git a/target/wag54g/patches/ar7.patch b/target/wag54g/patches/ar7.patch
index ba2f6ade4..c14c367b0 100644
--- a/target/wag54g/patches/ar7.patch
+++ b/target/wag54g/patches/ar7.patch
@@ -1,65 +1,6 @@
-diff -Nur linux-2.6.30.orig/arch/mips/Kconfig linux-2.6.30/arch/mips/Kconfig
---- linux-2.6.30.orig/arch/mips/Kconfig 2009-06-10 05:05:27.000000000 +0200
-+++ linux-2.6.30/arch/mips/Kconfig 2009-06-11 20:55:34.588179514 +0200
-@@ -19,6 +19,24 @@
- prompt "System type"
- default SGI_IP22
-
-+config AR7
-+ bool "Texas Instruments AR7"
-+ select BOOT_ELF32
-+ select DMA_NONCOHERENT
-+ select CEVT_R4K
-+ select CSRC_R4K
-+ select IRQ_CPU
-+ select NO_EXCEPT_FILL
-+ select SWAP_IO_SPACE
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SYS_HAS_EARLY_PRINTK
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select SYS_SUPPORTS_KGDB
-+ select SYS_SUPPORTS_LITTLE_ENDIAN
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select GENERIC_GPIO
-+ select GENERIC_HARDIRQS_NO__DO_IRQ
-+
- config MACH_ALCHEMY
- bool "Alchemy processor based machines"
-
-diff -Nur linux-2.6.30.orig/arch/mips/Makefile linux-2.6.30/arch/mips/Makefile
---- linux-2.6.30.orig/arch/mips/Makefile 2009-06-10 05:05:27.000000000 +0200
-+++ linux-2.6.30/arch/mips/Makefile 2009-06-11 20:55:34.591474348 +0200
-@@ -174,6 +174,13 @@
- #
-
- #
-+# Texas Instruments AR7
-+#
-+core-$(CONFIG_AR7) += arch/mips/ar7/
-+cflags-$(CONFIG_AR7) += -I$(srctree)/arch/mips/include/asm/mach-ar7
-+load-$(CONFIG_AR7) += 0xffffffff94100000
-+
-+#
- # Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
- #
- core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/
-diff -Nur linux-2.6.30.orig/arch/mips/ar7/Makefile linux-2.6.30/arch/mips/ar7/Makefile
---- linux-2.6.30.orig/arch/mips/ar7/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.30/arch/mips/ar7/Makefile 2009-06-11 20:55:34.591474348 +0200
-@@ -0,0 +1,10 @@
-+
-+obj-y := \
-+ prom.o \
-+ setup.o \
-+ memory.o \
-+ irq.o \
-+ time.o \
-+ platform.o \
-+ gpio.o \
-+ clock.o
-diff -Nur linux-2.6.30.orig/arch/mips/ar7/clock.c linux-2.6.30/arch/mips/ar7/clock.c
---- linux-2.6.30.orig/arch/mips/ar7/clock.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.30/arch/mips/ar7/clock.c 2009-06-11 20:55:34.591474348 +0200
+diff -Nur linux-2.6.30.5.orig/arch/mips/ar7/clock.c linux-2.6.30.5/arch/mips/ar7/clock.c
+--- linux-2.6.30.5.orig/arch/mips/ar7/clock.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30.5/arch/mips/ar7/clock.c 2009-08-23 22:10:22.000000000 +0200
@@ -0,0 +1,483 @@
+/*
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
@@ -544,9 +485,9 @@ diff -Nur linux-2.6.30.orig/arch/mips/ar7/clock.c linux-2.6.30/arch/mips/ar7/clo
+ break;
+ }
+}
-diff -Nur linux-2.6.30.orig/arch/mips/ar7/gpio.c linux-2.6.30/arch/mips/ar7/gpio.c
---- linux-2.6.30.orig/arch/mips/ar7/gpio.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.30/arch/mips/ar7/gpio.c 2009-06-11 20:55:34.595485753 +0200
+diff -Nur linux-2.6.30.5.orig/arch/mips/ar7/gpio.c linux-2.6.30.5/arch/mips/ar7/gpio.c
+--- linux-2.6.30.5.orig/arch/mips/ar7/gpio.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30.5/arch/mips/ar7/gpio.c 2009-08-23 22:10:22.000000000 +0200
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
@@ -597,9 +538,9 @@ diff -Nur linux-2.6.30.orig/arch/mips/ar7/gpio.c linux-2.6.30/arch/mips/ar7/gpio
+ ar7_gpio_list[gpio] = NULL;
+}
+EXPORT_SYMBOL(gpio_free);
-diff -Nur linux-2.6.30.orig/arch/mips/ar7/irq.c linux-2.6.30/arch/mips/ar7/irq.c
---- linux-2.6.30.orig/arch/mips/ar7/irq.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.30/arch/mips/ar7/irq.c 2009-06-11 20:55:34.595485753 +0200
+diff -Nur linux-2.6.30.5.orig/arch/mips/ar7/irq.c linux-2.6.30.5/arch/mips/ar7/irq.c
+--- linux-2.6.30.5.orig/arch/mips/ar7/irq.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30.5/arch/mips/ar7/irq.c 2009-08-23 22:10:22.000000000 +0200
@@ -0,0 +1,183 @@
+/*
+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
@@ -784,9 +725,23 @@ diff -Nur linux-2.6.30.orig/arch/mips/ar7/irq.c linux-2.6.30/arch/mips/ar7/irq.c
+ else
+ spurious_interrupt();
+}
-diff -Nur linux-2.6.30.orig/arch/mips/ar7/memory.c linux-2.6.30/arch/mips/ar7/memory.c
---- linux-2.6.30.orig/arch/mips/ar7/memory.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.30/arch/mips/ar7/memory.c 2009-06-11 20:55:34.595485753 +0200
+diff -Nur linux-2.6.30.5.orig/arch/mips/ar7/Makefile linux-2.6.30.5/arch/mips/ar7/Makefile
+--- linux-2.6.30.5.orig/arch/mips/ar7/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30.5/arch/mips/ar7/Makefile 2009-08-23 22:10:22.000000000 +0200
+@@ -0,0 +1,10 @@
++
++obj-y := \
++ prom.o \
++ setup.o \
++ memory.o \
++ irq.o \
++ time.o \
++ platform.o \
++ gpio.o \
++ clock.o
+diff -Nur linux-2.6.30.5.orig/arch/mips/ar7/memory.c linux-2.6.30.5/arch/mips/ar7/memory.c
+--- linux-2.6.30.5.orig/arch/mips/ar7/memory.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30.5/arch/mips/ar7/memory.c 2009-08-23 22:10:22.000000000 +0200
@@ -0,0 +1,74 @@
+/*
+ * Based on arch/mips/mm/init.c
@@ -862,10 +817,10 @@ diff -Nur linux-2.6.30.orig/arch/mips/ar7/memory.c linux-2.6.30/arch/mips/ar7/me
+{
+ return;
+}
-diff -Nur linux-2.6.30.orig/arch/mips/ar7/platform.c linux-2.6.30/arch/mips/ar7/platform.c
---- linux-2.6.30.orig/arch/mips/ar7/platform.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.30/arch/mips/ar7/platform.c 2009-06-11 20:55:34.599474529 +0200
-@@ -0,0 +1,554 @@
+diff -Nur linux-2.6.30.5.orig/arch/mips/ar7/platform.c linux-2.6.30.5/arch/mips/ar7/platform.c
+--- linux-2.6.30.5.orig/arch/mips/ar7/platform.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30.5/arch/mips/ar7/platform.c 2009-08-23 22:10:22.000000000 +0200
+@@ -0,0 +1,551 @@
+/*
+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
@@ -904,7 +859,6 @@ diff -Nur linux-2.6.30.orig/arch/mips/ar7/platform.c linux-2.6.30/arch/mips/ar7/
+#include <linux/phy.h>
+#include <linux/phy_fixed.h>
+
-+
+#include <asm/addrspace.h>
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mach-ar7/gpio.h>
@@ -967,6 +921,13 @@ diff -Nur linux-2.6.30.orig/arch/mips/ar7/platform.c linux-2.6.30/arch/mips/ar7/
+ .end = 0x107fffff,
+};
+
++/* lets assume this is suitable for both high and low cpmacs links */
++static struct fixed_phy_status fixed_phy_status __initdata = {
++ .link = 1,
++ .speed = 100,
++ .duplex = 1,
++};
++
+static struct resource cpmac_low_res[] = {
+ {
+ .name = "regs",
@@ -1076,13 +1037,6 @@ diff -Nur linux-2.6.30.orig/arch/mips/ar7/platform.c linux-2.6.30/arch/mips/ar7/
+ .width = 2,
+};
+
-+/* lets assume this is suitable for both high and low cpmacs links */
-+static struct fixed_phy_status fixed_phy_status __initdata = {
-+ .link = 1,
-+ .speed = 100,
-+ .duplex = 1,
-+};
-+
+static struct plat_cpmac_data cpmac_low_data = {
+ .reset_bit = 17,
+ .power_bit = 20,
@@ -1324,12 +1278,11 @@ diff -Nur linux-2.6.30.orig/arch/mips/ar7/platform.c linux-2.6.30/arch/mips/ar7/
+
+ memset(uart_port, 0, sizeof(struct uart_port) * 2);
+
-+ // use default type
-+ //uart_port[0].type = PORT_AR7;
++ uart_port[0].type = PORT_16550A;
+ uart_port[0].line = 0;
+ uart_port[0].irq = AR7_IRQ_UART0;
+ uart_port[0].uartclk = ar7_bus_freq() / 2;
-+ uart_port[0].iotype = UPIO_MEM;
++ uart_port[0].iotype = UPIO_MEM32;
+ uart_port[0].mapbase = AR7_REGS_UART0;
+ uart_port[0].membase = ioremap(uart_port[0].mapbase, 256);
+ uart_port[0].regshift = 2;
@@ -1340,12 +1293,11 @@ diff -Nur linux-2.6.30.orig/arch/mips/ar7/platform.c linux-2.6.30/arch/mips/ar7/
+
+ /* Only TNETD73xx have a second serial port */
+ if (ar7_has_second_uart()) {
-+ // use default type
-+ //uart_port[1].type = PORT_AR7;
++ uart_port[1].type = PORT_16550A;
+ uart_port[1].line = 1;
+ uart_port[1].irq = AR7_IRQ_UART1;
+ uart_port[1].uartclk = ar7_bus_freq() / 2;
-+ uart_port[1].iotype = UPIO_MEM;
++ uart_port[1].iotype = UPIO_MEM32;
+ uart_port[1].mapbase = UR8_REGS_UART1;
+ uart_port[1].membase = ioremap(uart_port[1].mapbase, 256);
+ uart_port[1].regshift = 2;
@@ -1420,9 +1372,9 @@ diff -Nur linux-2.6.30.orig/arch/mips/ar7/platform.c linux-2.6.30/arch/mips/ar7/
+
+
+arch_initcall(ar7_register_devices);
-diff -Nur linux-2.6.30.orig/arch/mips/ar7/prom.c linux-2.6.30/arch/mips/ar7/prom.c
---- linux-2.6.30.orig/arch/mips/ar7/prom.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.30/arch/mips/ar7/prom.c 2009-06-11 20:55:34.599474529 +0200
+diff -Nur linux-2.6.30.5.orig/arch/mips/ar7/prom.c linux-2.6.30.5/arch/mips/ar7/prom.c
+--- linux-2.6.30.5.orig/arch/mips/ar7/prom.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30.5/arch/mips/ar7/prom.c 2009-08-23 22:10:22.000000000 +0200
@@ -0,0 +1,321 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
@@ -1745,9 +1697,9 @@ diff -Nur linux-2.6.30.orig/arch/mips/ar7/prom.c linux-2.6.30/arch/mips/ar7/prom
+ return prom_getchar();
+}
+#endif
-diff -Nur linux-2.6.30.orig/arch/mips/ar7/setup.c linux-2.6.30/arch/mips/ar7/setup.c
---- linux-2.6.30.orig/arch/mips/ar7/setup.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.30/arch/mips/ar7/setup.c 2009-06-11 20:55:34.603475038 +0200
+diff -Nur linux-2.6.30.5.orig/arch/mips/ar7/setup.c linux-2.6.30.5/arch/mips/ar7/setup.c
+--- linux-2.6.30.5.orig/arch/mips/ar7/setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30.5/arch/mips/ar7/setup.c 2009-08-23 22:10:22.000000000 +0200
@@ -0,0 +1,105 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
@@ -1854,9 +1806,9 @@ diff -Nur linux-2.6.30.orig/arch/mips/ar7/setup.c linux-2.6.30/arch/mips/ar7/set
+}
+
+console_initcall(ar7_init_console);
-diff -Nur linux-2.6.30.orig/arch/mips/ar7/time.c linux-2.6.30/arch/mips/ar7/time.c
---- linux-2.6.30.orig/arch/mips/ar7/time.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.30/arch/mips/ar7/time.c 2009-06-11 20:55:34.603475038 +0200
+diff -Nur linux-2.6.30.5.orig/arch/mips/ar7/time.c linux-2.6.30.5/arch/mips/ar7/time.c
+--- linux-2.6.30.5.orig/arch/mips/ar7/time.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30.5/arch/mips/ar7/time.c 2009-08-23 22:10:22.000000000 +0200
@@ -0,0 +1,28 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
@@ -1886,9 +1838,9 @@ diff -Nur linux-2.6.30.orig/arch/mips/ar7/time.c linux-2.6.30/arch/mips/ar7/time
+{
+ mips_hpt_frequency = ar7_cpu_freq() / 2;
+}
-diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-ar7/ar7.h linux-2.6.30/arch/mips/include/asm/mach-ar7/ar7.h
---- linux-2.6.30.orig/arch/mips/include/asm/mach-ar7/ar7.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.30/arch/mips/include/asm/mach-ar7/ar7.h 2009-06-11 20:55:34.603475038 +0200
+diff -Nur linux-2.6.30.5.orig/arch/mips/include/asm/mach-ar7/ar7.h linux-2.6.30.5/arch/mips/include/asm/mach-ar7/ar7.h
+--- linux-2.6.30.5.orig/arch/mips/include/asm/mach-ar7/ar7.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30.5/arch/mips/include/asm/mach-ar7/ar7.h 2009-08-23 22:10:22.000000000 +0200
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
@@ -2060,9 +2012,9 @@ diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-ar7/ar7.h linux-2.6.30/ar
+}
+
+#endif /* __AR7_H__ */
-diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-ar7/gpio.h linux-2.6.30/arch/mips/include/asm/mach-ar7/gpio.h
---- linux-2.6.30.orig/arch/mips/include/asm/mach-ar7/gpio.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.30/arch/mips/include/asm/mach-ar7/gpio.h 2009-06-11 20:55:34.603475038 +0200
+diff -Nur linux-2.6.30.5.orig/arch/mips/include/asm/mach-ar7/gpio.h linux-2.6.30.5/arch/mips/include/asm/mach-ar7/gpio.h
+--- linux-2.6.30.5.orig/arch/mips/include/asm/mach-ar7/gpio.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30.5/arch/mips/include/asm/mach-ar7/gpio.h 2009-08-23 22:10:22.000000000 +0200
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
@@ -2173,9 +2125,9 @@ diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-ar7/gpio.h linux-2.6.30/a
+#include <asm-generic/gpio.h>
+
+#endif
-diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-ar7/irq.h linux-2.6.30/arch/mips/include/asm/mach-ar7/irq.h
---- linux-2.6.30.orig/arch/mips/include/asm/mach-ar7/irq.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.30/arch/mips/include/asm/mach-ar7/irq.h 2009-06-11 20:55:34.607474989 +0200
+diff -Nur linux-2.6.30.5.orig/arch/mips/include/asm/mach-ar7/irq.h linux-2.6.30.5/arch/mips/include/asm/mach-ar7/irq.h
+--- linux-2.6.30.5.orig/arch/mips/include/asm/mach-ar7/irq.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30.5/arch/mips/include/asm/mach-ar7/irq.h 2009-08-23 22:10:22.000000000 +0200
@@ -0,0 +1,16 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
@@ -2193,9 +2145,9 @@ diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-ar7/irq.h linux-2.6.30/ar
+#include_next <irq.h>
+
+#endif /* __ASM_AR7_IRQ_H */
-diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-ar7/prom.h linux-2.6.30/arch/mips/include/asm/mach-ar7/prom.h
---- linux-2.6.30.orig/arch/mips/include/asm/mach-ar7/prom.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.30/arch/mips/include/asm/mach-ar7/prom.h 2009-06-11 20:55:34.607474989 +0200
+diff -Nur linux-2.6.30.5.orig/arch/mips/include/asm/mach-ar7/prom.h linux-2.6.30.5/arch/mips/include/asm/mach-ar7/prom.h
+--- linux-2.6.30.5.orig/arch/mips/include/asm/mach-ar7/prom.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30.5/arch/mips/include/asm/mach-ar7/prom.h 2009-08-23 22:10:22.000000000 +0200
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2006, 2007 Florian Fainelli <florian@openwrt.org>
@@ -2223,9 +2175,9 @@ diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-ar7/prom.h linux-2.6.30/a
+extern void prom_meminit(void);
+
+#endif /* __PROM_H__ */
-diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-ar7/spaces.h linux-2.6.30/arch/mips/include/asm/mach-ar7/spaces.h
---- linux-2.6.30.orig/arch/mips/include/asm/mach-ar7/spaces.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.30/arch/mips/include/asm/mach-ar7/spaces.h 2009-06-11 20:55:34.607474989 +0200
+diff -Nur linux-2.6.30.5.orig/arch/mips/include/asm/mach-ar7/spaces.h linux-2.6.30.5/arch/mips/include/asm/mach-ar7/spaces.h
+--- linux-2.6.30.5.orig/arch/mips/include/asm/mach-ar7/spaces.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30.5/arch/mips/include/asm/mach-ar7/spaces.h 2009-08-23 22:10:22.000000000 +0200
@@ -0,0 +1,32 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
@@ -2240,7 +2192,7 @@ diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-ar7/spaces.h linux-2.6.30
+#define _ASM_AR7_SPACES_H
+
+#define CAC_BASE 0x80000000
-+#define IO_BASE 0xa0000000
++#define IO_BASE 0xa0000000
+#define UNCAC_BASE 0xa0000000
+#define MAP_BASE 0xc0000000
+
@@ -2259,9 +2211,9 @@ diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-ar7/spaces.h linux-2.6.30
+#endif
+
+#endif /* __ASM_AR7_SPACES_H */
-diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-ar7/war.h linux-2.6.30/arch/mips/include/asm/mach-ar7/war.h
---- linux-2.6.30.orig/arch/mips/include/asm/mach-ar7/war.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.30/arch/mips/include/asm/mach-ar7/war.h 2009-06-11 20:55:34.607474989 +0200
+diff -Nur linux-2.6.30.5.orig/arch/mips/include/asm/mach-ar7/war.h linux-2.6.30.5/arch/mips/include/asm/mach-ar7/war.h
+--- linux-2.6.30.5.orig/arch/mips/include/asm/mach-ar7/war.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30.5/arch/mips/include/asm/mach-ar7/war.h 2009-08-23 22:10:22.000000000 +0200
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
@@ -2288,26 +2240,53 @@ diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-ar7/war.h linux-2.6.30/ar
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_BCM947XX_WAR_H */
-diff -Nur linux-2.6.30.orig/arch/mips/include/asm/page.h linux-2.6.30/arch/mips/include/asm/page.h
---- linux-2.6.30.orig/arch/mips/include/asm/page.h 2009-06-10 05:05:27.000000000 +0200
-+++ linux-2.6.30/arch/mips/include/asm/page.h 2009-06-11 20:55:34.607474989 +0200
+diff -Nur linux-2.6.30.5.orig/arch/mips/include/asm/page.h linux-2.6.30.5/arch/mips/include/asm/page.h
+--- linux-2.6.30.5.orig/arch/mips/include/asm/page.h 2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/arch/mips/include/asm/page.h 2009-08-23 22:10:22.000000000 +0200
@@ -185,8 +185,11 @@
#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE)
-#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET)
-+#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE + \
-+ PHYS_OFFSET)
-+#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET - \
-+ PHYS_OFFSET)
++#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE + \
++ PHYS_OFFSET)
++#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET - \
++ PHYS_OFFSET)
+
#include <asm-generic/memory_model.h>
#include <asm-generic/page.h>
-diff -Nur linux-2.6.30.orig/arch/mips/kernel/traps.c linux-2.6.30/arch/mips/kernel/traps.c
---- linux-2.6.30.orig/arch/mips/kernel/traps.c 2009-06-10 05:05:27.000000000 +0200
-+++ linux-2.6.30/arch/mips/kernel/traps.c 2009-06-11 20:55:34.619476239 +0200
+diff -Nur linux-2.6.30.5.orig/arch/mips/Kconfig linux-2.6.30.5/arch/mips/Kconfig
+--- linux-2.6.30.5.orig/arch/mips/Kconfig 2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/arch/mips/Kconfig 2009-08-23 22:10:22.000000000 +0200
+@@ -19,6 +19,23 @@
+ prompt "System type"
+ default SGI_IP22
+
++config AR7
++ bool "Texas Instruments AR7"
++ select BOOT_ELF32
++ select DMA_NONCOHERENT
++ select CEVT_R4K
++ select CSRC_R4K
++ select IRQ_CPU
++ select SWAP_IO_SPACE
++ select SYS_HAS_CPU_MIPS32_R1
++ select SYS_HAS_EARLY_PRINTK
++ select SYS_SUPPORTS_32BIT_KERNEL
++ select SYS_SUPPORTS_KGDB
++ select SYS_SUPPORTS_LITTLE_ENDIAN
++ select SYS_SUPPORTS_BIG_ENDIAN
++ select GENERIC_GPIO
++ select GENERIC_HARDIRQS_NO__DO_IRQ
++
+ config MACH_ALCHEMY
+ bool "Alchemy processor based machines"
+
+diff -Nur linux-2.6.30.5.orig/arch/mips/kernel/traps.c linux-2.6.30.5/arch/mips/kernel/traps.c
+--- linux-2.6.30.5.orig/arch/mips/kernel/traps.c 2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/arch/mips/kernel/traps.c 2009-08-23 22:10:22.000000000 +0200
@@ -1256,9 +1256,22 @@
exception_handlers[n] = handler;
@@ -2334,9 +2313,26 @@ diff -Nur linux-2.6.30.orig/arch/mips/kernel/traps.c linux-2.6.30/arch/mips/kern
}
return (void *)old_handler;
}
-diff -Nur linux-2.6.30.orig/drivers/Kconfig linux-2.6.30/drivers/Kconfig
---- linux-2.6.30.orig/drivers/Kconfig 2009-06-10 05:05:27.000000000 +0200
-+++ linux-2.6.30/drivers/Kconfig 2009-06-11 20:55:34.619476239 +0200
+diff -Nur linux-2.6.30.5.orig/arch/mips/Makefile linux-2.6.30.5/arch/mips/Makefile
+--- linux-2.6.30.5.orig/arch/mips/Makefile 2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/arch/mips/Makefile 2009-08-23 22:10:22.000000000 +0200
+@@ -174,6 +174,13 @@
+ #
+
+ #
++# Texas Instruments AR7
++#
++core-$(CONFIG_AR7) += arch/mips/ar7/
++cflags-$(CONFIG_AR7) += -I$(srctree)/arch/mips/include/asm/mach-ar7
++load-$(CONFIG_AR7) += 0xffffffff94100000
++
++#
+ # Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
+ #
+ core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/
+diff -Nur linux-2.6.30.5.orig/drivers/Kconfig linux-2.6.30.5/drivers/Kconfig
+--- linux-2.6.30.5.orig/drivers/Kconfig 2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/drivers/Kconfig 2009-08-23 22:10:22.000000000 +0200
@@ -104,6 +104,8 @@
source "drivers/uio/Kconfig"
@@ -2346,9 +2342,9 @@ diff -Nur linux-2.6.30.orig/drivers/Kconfig linux-2.6.30/drivers/Kconfig
source "drivers/xen/Kconfig"
source "drivers/staging/Kconfig"
-diff -Nur linux-2.6.30.orig/drivers/Makefile linux-2.6.30/drivers/Makefile
---- linux-2.6.30.orig/drivers/Makefile 2009-06-10 05:05:27.000000000 +0200
-+++ linux-2.6.30/drivers/Makefile 2009-06-11 20:55:34.619476239 +0200
+diff -Nur linux-2.6.30.5.orig/drivers/Makefile linux-2.6.30.5/drivers/Makefile
+--- linux-2.6.30.5.orig/drivers/Makefile 2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/drivers/Makefile 2009-08-23 22:10:22.000000000 +0200
@@ -103,6 +103,7 @@
obj-$(CONFIG_HID) += hid/
obj-$(CONFIG_PPC_PS3) += ps3/
@@ -2357,201 +2353,25 @@ diff -Nur linux-2.6.30.orig/drivers/Makefile linux-2.6.30/drivers/Makefile
obj-$(CONFIG_SSB) += ssb/
obj-$(CONFIG_VIRTIO) += virtio/
obj-$(CONFIG_STAGING) += staging/
-diff -Nur linux-2.6.30.orig/drivers/char/Kconfig linux-2.6.30/drivers/char/Kconfig
---- linux-2.6.30.orig/drivers/char/Kconfig 2009-06-10 05:05:27.000000000 +0200
-+++ linux-2.6.30/drivers/char/Kconfig 2009-06-11 20:55:34.623477307 +0200
-@@ -974,6 +974,15 @@
- To compile this driver as a module, choose M here: the
- module will be called mwave.
+diff -Nur linux-2.6.30.5.orig/drivers/mtd/Kconfig linux-2.6.30.5/drivers/mtd/Kconfig
+--- linux-2.6.30.5.orig/drivers/mtd/Kconfig 2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/drivers/mtd/Kconfig 2009-08-23 22:10:22.000000000 +0200
+@@ -170,6 +170,12 @@
+ ---help---
+ TI AR7 partitioning support
-+config AR7_GPIO
-+ tristate "TI AR7 GPIO Support"
-+ depends on AR7
-+ help
-+ Give userspace access to the GPIO pins on the Texas Instruments AR7
-+ processors.
-+
-+ If compiled as a module, it will be called ar7_gpio.
-+
- config SCx200_GPIO
- tristate "NatSemi SCx200 GPIO Support"
- depends on SCx200
-diff -Nur linux-2.6.30.orig/drivers/char/Makefile linux-2.6.30/drivers/char/Makefile
---- linux-2.6.30.orig/drivers/char/Makefile 2009-06-10 05:05:27.000000000 +0200
-+++ linux-2.6.30/drivers/char/Makefile 2009-06-11 20:55:34.623477307 +0200
-@@ -90,6 +90,7 @@
- obj-$(CONFIG_PPDEV) += ppdev.o
- obj-$(CONFIG_NWBUTTON) += nwbutton.o
- obj-$(CONFIG_NWFLASH) += nwflash.o
-+obj-$(CONFIG_AR7_GPIO) += ar7_gpio.o
- obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
- obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o
- obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o
-diff -Nur linux-2.6.30.orig/drivers/char/ar7_gpio.c linux-2.6.30/drivers/char/ar7_gpio.c
---- linux-2.6.30.orig/drivers/char/ar7_gpio.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.30/drivers/char/ar7_gpio.c 2009-06-11 20:55:34.623477307 +0200
-@@ -0,0 +1,158 @@
-+/*
-+ * Copyright (C) 2007 Nicolas Thill <nico@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/fs.h>
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/uaccess.h>
-+#include <linux/io.h>
-+#include <linux/types.h>
-+#include <linux/cdev.h>
-+#include <gpio.h>
-+
-+#define DRVNAME "ar7_gpio"
-+#define LONGNAME "TI AR7 GPIOs Driver"
-+
-+MODULE_AUTHOR("Nicolas Thill <nico@openwrt.org>");
-+MODULE_DESCRIPTION(LONGNAME);
-+MODULE_LICENSE("GPL");
++config MTD_AR7_PARTS
++ tristate "TI AR7 partitioning support"
++ depends on MTD_PARTITIONS
++ ---help---
++ TI AR7 partitioning support
+
-+static int ar7_gpio_major;
-+
-+static ssize_t ar7_gpio_write(struct file *file, const char __user *buf,
-+ size_t len, loff_t *ppos)
-+{
-+ int pin = iminor(file->f_dentry->d_inode);
-+ size_t i;
-+
-+ for (i = 0; i < len; ++i) {
-+ char c;
-+ if (get_user(c, buf + i))
-+ return -EFAULT;
-+ switch (c) {
-+ case '0':
-+ gpio_set_value(pin, 0);
-+ break;
-+ case '1':
-+ gpio_set_value(pin, 1);
-+ break;
-+ case 'd':
-+ case 'D':
-+ ar7_gpio_disable(pin);
-+ break;
-+ case 'e':
-+ case 'E':
-+ ar7_gpio_enable(pin);
-+ break;
-+ case 'i':
-+ case 'I':
-+ case '<':
-+ gpio_direction_input(pin);
-+ break;
-+ case 'o':
-+ case 'O':
-+ case '>':
-+ gpio_direction_output(pin, 0);
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+ }
-+
-+ return len;
-+}
-+
-+static ssize_t ar7_gpio_read(struct file *file, char __user *buf,
-+ size_t len, loff_t *ppos)
-+{
-+ int pin = iminor(file->f_dentry->d_inode);
-+ int value;
-+
-+ value = gpio_get_value(pin);
-+ if (put_user(value ? '1' : '0', buf))
-+ return -EFAULT;
-+
-+ return 1;
-+}
-+
-+static int ar7_gpio_open(struct inode *inode, struct file *file)
-+{
-+ int m = iminor(inode);
-+
-+ if (m >= AR7_GPIO_MAX)
-+ return -EINVAL;
-+
-+ return nonseekable_open(inode, file);
-+}
-+
-+static int ar7_gpio_release(struct inode *inode, struct file *file)
-+{
-+ return 0;
-+}
-+
-+static const struct file_operations ar7_gpio_fops = {
-+ .owner = THIS_MODULE,
-+ .write = ar7_gpio_write,
-+ .read = ar7_gpio_read,
-+ .open = ar7_gpio_open,
-+ .release = ar7_gpio_release,
-+ .llseek = no_llseek,
-+};
-+
-+static struct platform_device *ar7_gpio_device;
-+
-+static int __init ar7_gpio_init(void)
-+{
-+ int rc;
-+
-+ ar7_gpio_device = platform_device_alloc(DRVNAME, -1);
-+ if (!ar7_gpio_device)
-+ return -ENOMEM;
-+
-+ rc = platform_device_add(ar7_gpio_device);
-+ if (rc < 0)
-+ goto out_put;
-+
-+ rc = register_chrdev(ar7_gpio_major, DRVNAME, &ar7_gpio_fops);
-+ if (rc < 0)
-+ goto out_put;
-+
-+ ar7_gpio_major = rc;
-+
-+ rc = 0;
-+
-+ goto out;
-+
-+out_put:
-+ platform_device_put(ar7_gpio_device);
-+out:
-+ return rc;
-+}
-+
-+static void __exit ar7_gpio_exit(void)
-+{
-+ unregister_chrdev(ar7_gpio_major, DRVNAME);
-+ platform_device_unregister(ar7_gpio_device);
-+}
-+
-+module_init(ar7_gpio_init);
-+module_exit(ar7_gpio_exit);
-diff -Nur linux-2.6.30.orig/drivers/mtd/maps/physmap.c linux-2.6.30/drivers/mtd/maps/physmap.c
---- linux-2.6.30.orig/drivers/mtd/maps/physmap.c 2009-06-10 05:05:27.000000000 +0200
-+++ linux-2.6.30/drivers/mtd/maps/physmap.c 2009-06-11 20:55:34.627477258 +0200
+ comment "User Modules And Translation Layers"
+
+ config MTD_CHAR
+diff -Nur linux-2.6.30.5.orig/drivers/mtd/maps/physmap.c linux-2.6.30.5/drivers/mtd/maps/physmap.c
+--- linux-2.6.30.5.orig/drivers/mtd/maps/physmap.c 2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/drivers/mtd/maps/physmap.c 2009-08-23 22:10:22.000000000 +0200
@@ -80,7 +80,7 @@
"map_rom",
NULL };
@@ -2561,21 +2381,9 @@ diff -Nur linux-2.6.30.orig/drivers/mtd/maps/physmap.c linux-2.6.30/drivers/mtd/
#endif
static int physmap_flash_probe(struct platform_device *dev)
-diff -Nur linux-2.6.30.orig/drivers/net/Kconfig linux-2.6.30/drivers/net/Kconfig
---- linux-2.6.30.orig/drivers/net/Kconfig 2009-06-10 05:05:27.000000000 +0200
-+++ linux-2.6.30/drivers/net/Kconfig 2009-06-11 20:55:34.627477258 +0200
-@@ -1760,7 +1760,7 @@
-
- config CPMAC
- tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
-- depends on NET_ETHERNET && EXPERIMENTAL && AR7 && BROKEN
-+ depends on NET_ETHERNET && EXPERIMENTAL && AR7
- select PHYLIB
- help
- TI AR7 CPMAC Ethernet support
-diff -Nur linux-2.6.30.orig/drivers/net/cpmac.c linux-2.6.30/drivers/net/cpmac.c
---- linux-2.6.30.orig/drivers/net/cpmac.c 2009-06-10 05:05:27.000000000 +0200
-+++ linux-2.6.30/drivers/net/cpmac.c 2009-06-11 20:55:34.635477718 +0200
+diff -Nur linux-2.6.30.5.orig/drivers/net/cpmac.c linux-2.6.30.5/drivers/net/cpmac.c
+--- linux-2.6.30.5.orig/drivers/net/cpmac.c 2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/drivers/net/cpmac.c 2009-08-23 22:10:22.000000000 +0200
@@ -615,13 +615,13 @@
dev_kfree_skb_irq(desc->skb);
@@ -2634,7 +2442,7 @@ diff -Nur linux-2.6.30.orig/drivers/net/cpmac.c linux-2.6.30/drivers/net/cpmac.c
if (phy_id == PHY_MAX_ADDR) {
if (external_switch || dumb_switch) {
- mdio_bus_id = 0; /* fixed phys bus */
-+ mdio_bus_id = 0;
++ strncpy(mdio_bus_id, "0", BUS_ID_SIZE);
phy_id = pdev->id;
} else {
dev_err(&pdev->dev, "no PHY present\n");
@@ -2648,60 +2456,43 @@ diff -Nur linux-2.6.30.orig/drivers/net/cpmac.c linux-2.6.30/drivers/net/cpmac.c
if (!dev) {
printk(KERN_ERR "cpmac: Unable to allocate net_device\n");
-@@ -1161,7 +1164,8 @@
+@@ -1161,8 +1164,11 @@
priv->msg_enable = netif_msg_init(debug_level, 0xff);
memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr));
- priv->phy = phy_connect(dev, dev_name(&cpmac_mii->phy_map[phy_id]->dev),
-+ snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
-+ priv->phy = phy_connect(dev, priv->phy_name,
++ snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
++ //priv->phy = phy_connect(dev, dev_name(&cpmac_mii->phy_map[phy_id]->dev),
++ priv->phy = phy_connect(dev, priv->phy_name,
&cpmac_adjust_link, 0, PHY_INTERFACE_MODE_MII);
++
if (IS_ERR(priv->phy)) {
if (netif_msg_drv(priv))
-@@ -1230,31 +1234,34 @@
- #warning FIXME: unhardcode gpio&reset bits
- ar7_gpio_disable(26);
- ar7_gpio_disable(27);
-- ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
- ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
-+ ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
- ar7_device_reset(AR7_RESET_BIT_EPHY);
-
- cpmac_mii->reset(cpmac_mii);
-
-- for (i = 0; i < 300000; i++)
-+ for (i = 0; i < 300; i++)
- if ((mask = cpmac_read(cpmac_mii->priv, CPMAC_MDIO_ALIVE)))
- break;
- else
-- cpu_relax();
-+ msleep(10);
-
- mask &= 0x7fffffff;
-- if (mask & (mask - 1)) {
-+
-+ //if (mask & (mask - 1)) {
- external_switch = 1;
- mask = 0;
-- }
-+ //}
+ printk(KERN_ERR "%s: Could not attach to PHY\n",
+@@ -1249,7 +1255,7 @@
+ }
-+ /*
cpmac_mii->phy_mask = ~(mask | 0x80000000);
- snprintf(cpmac_mii->id, MII_BUS_ID_SIZE, "0");
+ snprintf(cpmac_mii->id, MII_BUS_ID_SIZE, "1");
res = mdiobus_register(cpmac_mii);
if (res)
- goto fail_mii;
+diff -Nur linux-2.6.30.5.orig/drivers/net/Kconfig linux-2.6.30.5/drivers/net/Kconfig
+--- linux-2.6.30.5.orig/drivers/net/Kconfig 2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/drivers/net/Kconfig 2009-08-23 22:10:22.000000000 +0200
+@@ -1760,7 +1760,7 @@
-+ */
- res = platform_driver_register(&cpmac_driver);
- if (res)
- goto fail_cpmac;
-diff -Nur linux-2.6.30.orig/drivers/vlynq/Kconfig linux-2.6.30/drivers/vlynq/Kconfig
---- linux-2.6.30.orig/drivers/vlynq/Kconfig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.30/drivers/vlynq/Kconfig 2009-06-11 20:55:34.635477718 +0200
+ config CPMAC
+ tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
+- depends on NET_ETHERNET && EXPERIMENTAL && AR7 && BROKEN
++ depends on NET_ETHERNET && EXPERIMENTAL && AR7
+ select PHYLIB
+ help
+ TI AR7 CPMAC Ethernet support
+diff -Nur linux-2.6.30.5.orig/drivers/vlynq/Kconfig linux-2.6.30.5/drivers/vlynq/Kconfig
+--- linux-2.6.30.5.orig/drivers/vlynq/Kconfig 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30.5/drivers/vlynq/Kconfig 2009-08-23 22:10:22.000000000 +0200
@@ -0,0 +1,13 @@
+menu "TI VLYNQ"
+
@@ -2716,19 +2507,19 @@ diff -Nur linux-2.6.30.orig/drivers/vlynq/Kconfig linux-2.6.30/drivers/vlynq/Kco
+ If unsure, say N
+
+endmenu
-diff -Nur linux-2.6.30.orig/drivers/vlynq/Makefile linux-2.6.30/drivers/vlynq/Makefile
---- linux-2.6.30.orig/drivers/vlynq/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.30/drivers/vlynq/Makefile 2009-06-11 20:55:34.635477718 +0200
+diff -Nur linux-2.6.30.5.orig/drivers/vlynq/Makefile linux-2.6.30.5/drivers/vlynq/Makefile
+--- linux-2.6.30.5.orig/drivers/vlynq/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30.5/drivers/vlynq/Makefile 2009-08-23 22:10:22.000000000 +0200
@@ -0,0 +1,5 @@
+#
+# Makefile for kernel vlynq drivers
+#
+
+obj-$(CONFIG_VLYNQ) += vlynq.o
-diff -Nur linux-2.6.30.orig/drivers/vlynq/vlynq.c linux-2.6.30/drivers/vlynq/vlynq.c
---- linux-2.6.30.orig/drivers/vlynq/vlynq.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.30/drivers/vlynq/vlynq.c 2009-06-11 20:55:52.962219898 +0200
-@@ -0,0 +1,782 @@
+diff -Nur linux-2.6.30.5.orig/drivers/vlynq/vlynq.c linux-2.6.30.5/drivers/vlynq/vlynq.c
+--- linux-2.6.30.5.orig/drivers/vlynq/vlynq.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30.5/drivers/vlynq/vlynq.c 2009-08-23 22:10:22.000000000 +0200
+@@ -0,0 +1,814 @@
+/*
+ * Copyright (C) 2006, 2007 Eugene Konev <ejka@openwrt.org>
+ *
@@ -2745,6 +2536,9 @@ diff -Nur linux-2.6.30.orig/drivers/vlynq/vlynq.c linux-2.6.30/drivers/vlynq/vly
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
++ *
++ * Parts of the VLYNQ specification can be found here:
++ * http://www.ti.com/litv/pdf/sprue36a
+ */
+
+#include <linux/init.h>
@@ -2804,15 +2598,11 @@ diff -Nur linux-2.6.30.orig/drivers/vlynq/vlynq.c linux-2.6.30/drivers/vlynq/vly
+ u32 int_device[8];
+};
+
-+#define vlynq_reg_read(reg) readl(&(reg))
-+#define vlynq_reg_write(reg, val) writel(val, &(reg))
-+
-+static int __vlynq_enable_device(struct vlynq_device *dev);
-+
-+#ifdef VLYNQ_DEBUG
++#ifdef CONFIG_VLYNQ_DEBUG
+static void vlynq_dump_regs(struct vlynq_device *dev)
+{
+ int i;
++
+ printk(KERN_DEBUG "VLYNQ local=%p remote=%p\n",
+ dev->local, dev->remote);
+ for (i = 0; i < 32; i++) {
@@ -2826,20 +2616,23 @@ diff -Nur linux-2.6.30.orig/drivers/vlynq/vlynq.c linux-2.6.30/drivers/vlynq/vly
+static void vlynq_dump_mem(u32 *base, int count)
+{
+ int i;
++
+ for (i = 0; i < (count + 3) / 4; i++) {
-+ if (i % 4 == 0) printk(KERN_DEBUG "\nMEM[0x%04x]:", i * 4);
++ if (i % 4 == 0)
++ printk(KERN_DEBUG "\nMEM[0x%04x]:", i * 4);
+ printk(KERN_DEBUG " 0x%08x", *(base + i));
+ }
+ printk(KERN_DEBUG "\n");
+}
+#endif
+
-+int vlynq_linked(struct vlynq_device *dev)
++/* Check the VLYNQ link status with a given device */
++static int vlynq_linked(struct vlynq_device *dev)
+{
+ int i;
+
+ for (i = 0; i < 100; i++)
-+ if (vlynq_reg_read(dev->local->status) & VLYNQ_STATUS_LINK)
++ if (readl(&dev->local->status) & VLYNQ_STATUS_LINK)
+ return 1;
+ else
+ cpu_relax();
@@ -2849,17 +2642,15 @@ diff -Nur linux-2.6.30.orig/drivers/vlynq/vlynq.c linux-2.6.30/drivers/vlynq/vly
+
+static void vlynq_reset(struct vlynq_device *dev)
+{
-+ vlynq_reg_write(dev->local->control,
-+ vlynq_reg_read(dev->local->control) |
-+ VLYNQ_CTRL_RESET);
++ writel(readl(&dev->local->control) | VLYNQ_CTRL_RESET,
++ &dev->local->control);
+
+ /* Wait for the devices to finish resetting */
+ msleep(5);
+
+ /* Remove reset bit */
-+ vlynq_reg_write(dev->local->control,
-+ vlynq_reg_read(dev->local->control) &
-+ ~VLYNQ_CTRL_RESET);
++ writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET,
++ &dev->local->control);
+
+ /* Give some time for the devices to settle */
+ msleep(5);
@@ -2873,9 +2664,9 @@ diff -Nur linux-2.6.30.orig/drivers/vlynq/vlynq.c linux-2.6.30/drivers/vlynq/vly
+
+ BUG_ON(!dev);
+ virq = irq - dev->irq_start;
-+ val = vlynq_reg_read(dev->remote->int_device[virq >> 2]);
++ val = readl(&dev->remote->int_device[virq >> 2]);
+ val |= (VINT_ENABLE | virq) << VINT_OFFSET(virq);
-+ vlynq_reg_write(dev->remote->int_device[virq >> 2], val);
++ writel(val, &dev->remote->int_device[virq >> 2]);
+}
+
+static void vlynq_irq_mask(unsigned int irq)
@@ -2886,9 +2677,9 @@ diff -Nur linux-2.6.30.orig/drivers/vlynq/vlynq.c linux-2.6.30/drivers/vlynq/vly
+
+ BUG_ON(!dev);
+ virq = irq - dev->irq_start;
-+ val = vlynq_reg_read(dev->remote->int_device[virq >> 2]);
++ val = readl(&dev->remote->int_device[virq >> 2]);
+ val &= ~(VINT_ENABLE << VINT_OFFSET(virq));
-+ vlynq_reg_write(dev->remote->int_device[virq >> 2], val);
++ writel(val, &dev->remote->int_device[virq >> 2]);
+}
+
+static int vlynq_irq_type(unsigned int irq, unsigned int flow_type)
@@ -2899,7 +2690,7 @@ diff -Nur linux-2.6.30.orig/drivers/vlynq/vlynq.c linux-2.6.30/drivers/vlynq/vly
+
+ BUG_ON(!dev);
+ virq = irq - dev->irq_start;
-+ val = vlynq_reg_read(dev->remote->int_device[virq >> 2]);
++ val = readl(&dev->remote->int_device[virq >> 2]);
+ switch (flow_type & IRQ_TYPE_SENSE_MASK) {
+ case IRQ_TYPE_EDGE_RISING:
+ case IRQ_TYPE_EDGE_FALLING:
@@ -2918,28 +2709,30 @@ diff -Nur linux-2.6.30.orig/drivers/vlynq/vlynq.c linux-2.6.30/drivers/vlynq/vly
+ default:
+ return -EINVAL;
+ }
-+ vlynq_reg_write(dev->remote->int_device[virq >> 2], val);
++ writel(val, &dev->remote->int_device[virq >> 2]);
+ return 0;
+}
+
+static void vlynq_local_ack(unsigned int irq)
+{
+ struct vlynq_device *dev = get_irq_chip_data(irq);
-+ u32 status = vlynq_reg_read(dev->local->status);
-+ if (printk_ratelimit())
-+ printk(KERN_DEBUG "%s: local status: 0x%08x\n",
++
++ u32 status = readl(&dev->local->status);
++
++ pr_debug("%s: local status: 0x%08x\n",
+ dev_name(&dev->dev), status);
-+ vlynq_reg_write(dev->local->status, status);
++ writel(status, &dev->local->status);
+}
+
+static void vlynq_remote_ack(unsigned int irq)
+{
+ struct vlynq_device *dev = get_irq_chip_data(irq);
-+ u32 status = vlynq_reg_read(dev->remote->status);
-+ if (printk_ratelimit())
-+ printk(KERN_DEBUG "%s: remote status: 0x%08x\n",
++
++ u32 status = readl(&dev->remote->status);
++
++ pr_debug("%s: remote status: 0x%08x\n",
+ dev_name(&dev->dev), status);
-+ vlynq_reg_write(dev->remote->status, status);
++ writel(status, &dev->remote->status);
+}
+
+static irqreturn_t vlynq_irq(int irq, void *dev_id)
@@ -2948,8 +2741,8 @@ diff -Nur linux-2.6.30.orig/drivers/vlynq/vlynq.c linux-2.6.30/drivers/vlynq/vly
+ u32 status;
+ int virq = 0;
+
-+ status = vlynq_reg_read(dev->local->int_status);
-+ vlynq_reg_write(dev->local->int_status, status);
++ status = readl(&dev->local->int_status);
++ writel(status, &dev->local->int_status);
+
+ if (unlikely(!status))
+ spurious_interrupt();
@@ -2998,23 +2791,23 @@ diff -Nur linux-2.6.30.orig/drivers/vlynq/vlynq.c linux-2.6.30/drivers/vlynq/vly
+ }
+
+ /* Clear local and remote error bits */
-+ vlynq_reg_write(dev->local->status, vlynq_reg_read(dev->local->status));
-+ vlynq_reg_write(dev->remote->status,
-+ vlynq_reg_read(dev->remote->status));
++ writel(readl(&dev->local->status), &dev->local->status);
++ writel(readl(&dev->remote->status), &dev->remote->status);
+
+ /* Now setup interrupts */
+ val = VLYNQ_CTRL_INT_VECTOR(dev->local_irq);
+ val |= VLYNQ_CTRL_INT_ENABLE | VLYNQ_CTRL_INT_LOCAL |
+ VLYNQ_CTRL_INT2CFG;
-+ val |= vlynq_reg_read(dev->local->control);
-+ vlynq_reg_write(dev->local->int_ptr, VLYNQ_INT_OFFSET);
-+ vlynq_reg_write(dev->local->control, val);
++ val |= readl(&dev->local->control);
++ writel(VLYNQ_INT_OFFSET, &dev->local->int_ptr);
++ writel(val, &dev->local->control);
+
+ val = VLYNQ_CTRL_INT_VECTOR(dev->remote_irq);
+ val |= VLYNQ_CTRL_INT_ENABLE;
-+ val |= vlynq_reg_read(dev->remote->control);
-+ vlynq_reg_write(dev->remote->int_ptr, VLYNQ_INT_OFFSET);
-+ vlynq_reg_write(dev->remote->control, val);
++ val |= readl(&dev->remote->control);
++ writel(VLYNQ_INT_OFFSET, &dev->remote->int_ptr);
++ writel(val, &dev->remote->int_ptr);
++ writel(val, &dev->remote->control);
+
+ for (i = dev->irq_start; i <= dev->irq_end; i++) {
+ virq = i - dev->irq_start;
@@ -3030,12 +2823,13 @@ diff -Nur linux-2.6.30.orig/drivers/vlynq/vlynq.c linux-2.6.30/drivers/vlynq/vly
+ set_irq_chip_and_handler(i, &vlynq_irq_chip,
+ handle_simple_irq);
+ set_irq_chip_data(i, dev);
-+ vlynq_reg_write(dev->remote->int_device[virq >> 2], 0);
++ writel(0, &dev->remote->int_device[virq >> 2]);
+ }
+ }
+
+ if (request_irq(dev->irq, vlynq_irq, IRQF_SHARED, "vlynq", dev)) {
-+ printk(KERN_ERR "%s: request_irq failed\n", dev_name(&dev->dev));
++ printk(KERN_ERR "%s: request_irq failed\n",
++ dev_name(&dev->dev));
+ return -EAGAIN;
+ }
+
@@ -3059,11 +2853,11 @@ diff -Nur linux-2.6.30.orig/drivers/vlynq/vlynq.c linux-2.6.30/drivers/vlynq/vly
+ if (ids->id == vdev->dev_id) {
+ vdev->divisor = ids->divisor;
+ vlynq_set_drvdata(vdev, ids);
-+ printk(KERN_INFO "Driver found for VLYNQ " \
++ printk(KERN_INFO "Driver found for VLYNQ "
+ "device: %08x\n", vdev->dev_id);
+ return 1;
+ }
-+ printk(KERN_DEBUG "Not using the %08x VLYNQ device's driver" \
++ printk(KERN_DEBUG "Not using the %08x VLYNQ device's driver"
+ " for VLYNQ device: %08x\n", ids->id, vdev->dev_id);
+ ids++;
+ }
@@ -3077,8 +2871,7 @@ diff -Nur linux-2.6.30.orig/drivers/vlynq/vlynq.c linux-2.6.30/drivers/vlynq/vly
+ struct vlynq_device_id *id = vlynq_get_drvdata(vdev);
+ int result = -ENODEV;
+
-+ get_device(dev);
-+ if (drv && drv->probe)
++ if (drv->probe)
+ result = drv->probe(vdev, id);
+ if (result)
+ put_device(dev);
@@ -3088,9 +2881,10 @@ diff -Nur linux-2.6.30.orig/drivers/vlynq/vlynq.c linux-2.6.30/drivers/vlynq/vly
+static int vlynq_device_remove(struct device *dev)
+{
+ struct vlynq_driver *drv = to_vlynq_driver(dev->driver);
-+ if (drv && drv->remove)
++
++ if (drv->remove)
+ drv->remove(to_vlynq_device(dev));
-+ put_device(dev);
++
+ return 0;
+}
+
@@ -3108,6 +2902,14 @@ diff -Nur linux-2.6.30.orig/drivers/vlynq/vlynq.c linux-2.6.30/drivers/vlynq/vly
+}
+EXPORT_SYMBOL(vlynq_unregister_driver);
+
++/*
++ * A VLYNQ remote device can clock the VLYNQ bus master
++ * using a dedicated clock line. In that case, both the
++ * remove device and the bus master should have the same
++ * serial clock dividers configured. Iterate through the
++ * 8 possible dividers until we actually link with the
++ * device.
++ */
+static int __vlynq_try_remote(struct vlynq_device *dev)
+{
+ int i;
@@ -3120,16 +2922,16 @@ diff -Nur linux-2.6.30.orig/drivers/vlynq/vlynq.c linux-2.6.30/drivers/vlynq/vly
+ if (!vlynq_linked(dev))
+ break;
+
-+ vlynq_reg_write(dev->remote->control,
-+ (vlynq_reg_read(dev->remote->control) &
++ writel((readl(&dev->remote->control) &
+ ~VLYNQ_CTRL_CLOCK_MASK) |
+ VLYNQ_CTRL_CLOCK_INT |
-+ VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1));
-+ vlynq_reg_write(dev->local->control,
-+ ((vlynq_reg_read(dev->local->control)
++ VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
++ &dev->remote->control);
++ writel((readl(&dev->local->control)
+ & ~(VLYNQ_CTRL_CLOCK_INT |
+ VLYNQ_CTRL_CLOCK_MASK)) |
-+ VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1)));
++ VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
++ &dev->local->control);
+
+ if (vlynq_linked(dev)) {
+ printk(KERN_DEBUG
@@ -3145,21 +2947,28 @@ diff -Nur linux-2.6.30.orig/drivers/vlynq/vlynq.c linux-2.6.30/drivers/vlynq/vly
+ return -ENODEV;
+}
+
++/*
++ * A VLYNQ remote device can be clocked by the VLYNQ bus
++ * master using a dedicated clock line. In that case, only
++ * the bus master configures the serial clock divider.
++ * Iterate through the 8 possible dividers until we
++ * actually get a link with the device.
++ */
+static int __vlynq_try_local(struct vlynq_device *dev)
+{
+ int i;
-+
++
+ vlynq_reset(dev);
+
+ for (i = dev->dev_id ? vlynq_ldiv2 : vlynq_ldiv8; dev->dev_id ?
+ i <= vlynq_ldiv8 : i >= vlynq_ldiv2;
+ dev->dev_id ? i++ : i--) {
+
-+ vlynq_reg_write(dev->local->control,
-+ (vlynq_reg_read(dev->local->control) &
++ writel((readl(&dev->local->control) &
+ ~VLYNQ_CTRL_CLOCK_MASK) |
+ VLYNQ_CTRL_CLOCK_INT |
-+ VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1));
++ VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1),
++ &dev->local->control);
+
+ if (vlynq_linked(dev)) {
+ printk(KERN_DEBUG
@@ -3175,19 +2984,25 @@ diff -Nur linux-2.6.30.orig/drivers/vlynq/vlynq.c linux-2.6.30/drivers/vlynq/vly
+ return -ENODEV;
+}
+
++/*
++ * When using external clocking method, serial clock
++ * is supplied by an external oscillator, therefore we
++ * should mask the local clock bit in the clock control
++ * register for both the bus master and the remote device.
++ */
+static int __vlynq_try_external(struct vlynq_device *dev)
+{
+ vlynq_reset(dev);
+ if (!vlynq_linked(dev))
+ return -ENODEV;
+
-+ vlynq_reg_write(dev->remote->control,
-+ (vlynq_reg_read(dev->remote->control) &
-+ ~VLYNQ_CTRL_CLOCK_INT));
++ writel((readl(&dev->remote->control) &
++ ~VLYNQ_CTRL_CLOCK_INT),
++ &dev->remote->control);
+
-+ vlynq_reg_write(dev->local->control,
-+ (vlynq_reg_read(dev->local->control) &
-+ ~VLYNQ_CTRL_CLOCK_INT));
++ writel((readl(&dev->local->control) &
++ ~VLYNQ_CTRL_CLOCK_INT),
++ &dev->local->control);
+
+ if (vlynq_linked(dev)) {
+ printk(KERN_DEBUG "%s: using external clock\n",
@@ -3195,7 +3010,7 @@ diff -Nur linux-2.6.30.orig/drivers/vlynq/vlynq.c linux-2.6.30/drivers/vlynq/vly
+ dev->divisor = vlynq_div_external;
+ return 0;
+ }
-+
++
+ return -ENODEV;
+}
+
@@ -3212,10 +3027,10 @@ diff -Nur linux-2.6.30.orig/drivers/vlynq/vlynq.c linux-2.6.30/drivers/vlynq/vly
+ case vlynq_div_external:
+ case vlynq_div_auto:
+ /* When the device is brought from reset it should have clock
-+ generation negotiated by hardware.
-+ Check which device is generating clocks and perform setup
-+ accordingly */
-+ if (vlynq_linked(dev) && vlynq_reg_read(dev->remote->control) &
++ * generation negotiated by hardware.
++ * Check which device is generating clocks and perform setup
++ * accordingly */
++ if (vlynq_linked(dev) && readl(&dev->remote->control) &
+ VLYNQ_CTRL_CLOCK_INT) {
+ if (!__vlynq_try_remote(dev) ||
+ !__vlynq_try_local(dev) ||
@@ -3228,31 +3043,43 @@ diff -Nur linux-2.6.30.orig/drivers/vlynq/vlynq.c linux-2.6.30/drivers/vlynq/vly
+ return 0;
+ }
+ break;
-+ case vlynq_ldiv1: case vlynq_ldiv2: case vlynq_ldiv3: case vlynq_ldiv4:
-+ case vlynq_ldiv5: case vlynq_ldiv6: case vlynq_ldiv7: case vlynq_ldiv8:
-+ vlynq_reg_write(dev->local->control,
-+ VLYNQ_CTRL_CLOCK_INT |
-+ VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
-+ vlynq_ldiv1));
-+ vlynq_reg_write(dev->remote->control, 0);
++ case vlynq_ldiv1:
++ case vlynq_ldiv2:
++ case vlynq_ldiv3:
++ case vlynq_ldiv4:
++ case vlynq_ldiv5:
++ case vlynq_ldiv6:
++ case vlynq_ldiv7:
++ case vlynq_ldiv8:
++ writel(VLYNQ_CTRL_CLOCK_INT |
++ VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
++ vlynq_ldiv1), &dev->local->control);
++ writel(0, &dev->remote->control);
+ if (vlynq_linked(dev)) {
+ printk(KERN_DEBUG
-+ "%s: using local clock divisor %d\n",
-+ dev_name(&dev->dev), dev->divisor - vlynq_ldiv1 + 1);
++ "%s: using local clock divisor %d\n",
++ dev_name(&dev->dev),
++ dev->divisor - vlynq_ldiv1 + 1);
+ return 0;
+ }
+ break;
-+ case vlynq_rdiv1: case vlynq_rdiv2: case vlynq_rdiv3: case vlynq_rdiv4:
-+ case vlynq_rdiv5: case vlynq_rdiv6: case vlynq_rdiv7: case vlynq_rdiv8:
-+ vlynq_reg_write(dev->local->control, 0);
-+ vlynq_reg_write(dev->remote->control,
-+ VLYNQ_CTRL_CLOCK_INT |
-+ VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
-+ vlynq_rdiv1));
++ case vlynq_rdiv1:
++ case vlynq_rdiv2:
++ case vlynq_rdiv3:
++ case vlynq_rdiv4:
++ case vlynq_rdiv5:
++ case vlynq_rdiv6:
++ case vlynq_rdiv7:
++ case vlynq_rdiv8:
++ writel(0, &dev->local->control);
++ writel(VLYNQ_CTRL_CLOCK_INT |
++ VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
++ vlynq_rdiv1), &dev->remote->control);
+ if (vlynq_linked(dev)) {
+ printk(KERN_DEBUG
-+ "%s: using remote clock divisor %d\n",
-+ dev_name(&dev->dev), dev->divisor - vlynq_rdiv1 + 1);
++ "%s: using remote clock divisor %d\n",
++ dev_name(&dev->dev),
++ dev->divisor - vlynq_rdiv1 + 1);
+ return 0;
+ }
+ break;
@@ -3299,12 +3126,10 @@ diff -Nur linux-2.6.30.orig/drivers/vlynq/vlynq.c linux-2.6.30/drivers/vlynq/vly
+ if (!dev->enabled)
+ return -ENXIO;
+
-+ vlynq_reg_write(dev->local->tx_offset, tx_offset);
++ writel(tx_offset, &dev->local->tx_offset);
+ for (i = 0; i < 4; i++) {
-+ vlynq_reg_write(dev->local->rx_mapping[i].offset,
-+ mapping[i].offset);
-+ vlynq_reg_write(dev->local->rx_mapping[i].size,
-+ mapping[i].size);
++ writel(mapping[i].offset, &dev->local->rx_mapping[i].offset);
++ writel(mapping[i].size, &dev->local->rx_mapping[i].size);
+ }
+ return 0;
+}
@@ -3318,12 +3143,10 @@ diff -Nur linux-2.6.30.orig/drivers/vlynq/vlynq.c linux-2.6.30/drivers/vlynq/vly
+ if (!dev->enabled)
+ return -ENXIO;
+
-+ vlynq_reg_write(dev->remote->tx_offset, tx_offset);
++ writel(tx_offset, &dev->remote->tx_offset);
+ for (i = 0; i < 4; i++) {
-+ vlynq_reg_write(dev->remote->rx_mapping[i].offset,
-+ mapping[i].offset);
-+ vlynq_reg_write(dev->remote->rx_mapping[i].size,
-+ mapping[i].size);
++ writel(mapping[i].offset, &dev->remote->rx_mapping[i].offset);
++ writel(mapping[i].size, &dev->remote->rx_mapping[i].size);
+ }
+ return 0;
+}
@@ -3439,7 +3262,7 @@ diff -Nur linux-2.6.30.orig/drivers/vlynq/vlynq.c linux-2.6.30/drivers/vlynq/vly
+ dev->divisor = vlynq_div_auto;
+ result = __vlynq_enable_device(dev);
+ if (result == 0) {
-+ dev->dev_id = vlynq_reg_read(dev->remote->chip);
++ dev->dev_id = readl(&dev->remote->chip);
+ ((struct plat_vlynq_ops *)(dev->dev.platform_data))->off(dev);
+ }
+ if (dev->dev_id)
@@ -3511,148 +3334,9 @@ diff -Nur linux-2.6.30.orig/drivers/vlynq/vlynq.c linux-2.6.30/drivers/vlynq/vly
+
+module_init(vlynq_init);
+module_exit(vlynq_exit);
-diff -Nur linux-2.6.30.orig/drivers/watchdog/ar7_wdt.c linux-2.6.30/drivers/watchdog/ar7_wdt.c
---- linux-2.6.30.orig/drivers/watchdog/ar7_wdt.c 2009-06-10 05:05:27.000000000 +0200
-+++ linux-2.6.30/drivers/watchdog/ar7_wdt.c 2009-06-11 20:55:34.639477111 +0200
-@@ -69,8 +69,7 @@
- u32 prescale;
- };
-
--static unsigned long wdt_is_open;
--static spinlock_t wdt_lock;
-+static struct semaphore open_semaphore;
- static unsigned expect_close;
-
- /* XXX currently fixed, allows max margin ~68.72 secs */
-@@ -155,10 +154,8 @@
- u32 change;
-
- change = new_margin * (ar7_vbus_freq() / prescale_value);
-- if (change < 1)
-- change = 1;
-- if (change > 0xffff)
-- change = 0xffff;
-+ if (change < 1) change = 1;
-+ if (change > 0xffff) change = 0xffff;
- ar7_wdt_change(change);
- margin = change * prescale_value / ar7_vbus_freq();
- printk(KERN_INFO DRVNAME
-@@ -182,7 +179,7 @@
- static int ar7_wdt_open(struct inode *inode, struct file *file)
- {
- /* only allow one at a time */
-- if (test_and_set_bit(0, &wdt_is_open))
-+ if (down_trylock(&open_semaphore))
- return -EBUSY;
- ar7_wdt_enable_wdt();
- expect_close = 0;
-@@ -198,7 +195,9 @@
- "will not disable the watchdog timer\n");
- else if (!nowayout)
- ar7_wdt_disable_wdt();
-- clear_bit(0, &wdt_is_open);
-+
-+ up(&open_semaphore);
-+
- return 0;
- }
-
-@@ -213,7 +212,7 @@
- }
-
- static struct notifier_block ar7_wdt_notifier = {
-- .notifier_call = ar7_wdt_notify_sys,
-+ .notifier_call = ar7_wdt_notify_sys
- };
-
- static ssize_t ar7_wdt_write(struct file *file, const char *data,
-@@ -223,14 +222,12 @@
- if (len) {
- size_t i;
-
-- spin_lock(&wdt_lock);
- ar7_wdt_kick(1);
-- spin_unlock(&wdt_lock);
-
- expect_close = 0;
- for (i = 0; i < len; ++i) {
- char c;
-- if (get_user(c, data + i))
-+ if (get_user(c, data+i))
- return -EFAULT;
- if (c == 'V')
- expect_close = 1;
-@@ -240,17 +237,19 @@
- return len;
- }
-
--static long ar7_wdt_ioctl(struct file *file,
-- unsigned int cmd, unsigned long arg)
-+static int ar7_wdt_ioctl(struct inode *inode, struct file *file,
-+ unsigned int cmd, unsigned long arg)
- {
- static struct watchdog_info ident = {
- .identity = LONGNAME,
- .firmware_version = 1,
-- .options = (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING),
-+ .options = (WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING),
- };
- int new_margin;
-
- switch (cmd) {
-+ default:
-+ return -ENOTTY;
- case WDIOC_GETSUPPORT:
- if (copy_to_user((struct watchdog_info *)arg, &ident,
- sizeof(ident)))
-@@ -270,24 +269,20 @@
- if (new_margin < 1)
- return -EINVAL;
-
-- spin_lock(&wdt_lock);
- ar7_wdt_update_margin(new_margin);
- ar7_wdt_kick(1);
-- spin_unlock(&wdt_lock);
-
- case WDIOC_GETTIMEOUT:
- if (put_user(margin, (int *)arg))
- return -EFAULT;
- return 0;
-- default:
-- return -ENOTTY;
- }
- }
-
--static const struct file_operations ar7_wdt_fops = {
-+static struct file_operations ar7_wdt_fops = {
- .owner = THIS_MODULE,
- .write = ar7_wdt_write,
-- .unlocked_ioctl = ar7_wdt_ioctl,
-+ .ioctl = ar7_wdt_ioctl,
- .open = ar7_wdt_open,
- .release = ar7_wdt_release,
- };
-@@ -302,8 +297,6 @@
- {
- int rc;
-
-- spin_lock_init(&wdt_lock);
--
- ar7_wdt_get_regs();
-
- if (!request_mem_region(ar7_regs_wdt, sizeof(struct ar7_wdt),
-@@ -319,6 +312,8 @@
- ar7_wdt_prescale(prescale_value);
- ar7_wdt_update_margin(margin);
-
-+ sema_init(&open_semaphore, 1);
-+
- rc = register_reboot_notifier(&ar7_wdt_notifier);
- if (rc) {
- printk(KERN_ERR DRVNAME
-diff -Nur linux-2.6.30.orig/include/linux/vlynq.h linux-2.6.30/include/linux/vlynq.h
---- linux-2.6.30.orig/include/linux/vlynq.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.30/include/linux/vlynq.h 2009-06-11 20:55:34.639477111 +0200
+diff -Nur linux-2.6.30.5.orig/include/linux/vlynq.h linux-2.6.30.5/include/linux/vlynq.h
+--- linux-2.6.30.5.orig/include/linux/vlynq.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30.5/include/linux/vlynq.h 2009-08-23 22:10:22.000000000 +0200
@@ -0,0 +1,161 @@
+/*
+ * Copyright (C) 2006, 2007 Eugene Konev <ejka@openwrt.org>
@@ -3815,40 +3499,3 @@ diff -Nur linux-2.6.30.orig/include/linux/vlynq.h linux-2.6.30/include/linux/vly
+extern int vlynq_set_remote_irq(struct vlynq_device *dev, int virq);
+
+#endif /* __VLYNQ_H__ */
-diff -Nur linux-2.6.30.orig/kernel/futex.c linux-2.6.30/kernel/futex.c
---- linux-2.6.30.orig/kernel/futex.c 2009-06-10 05:05:27.000000000 +0200
-+++ linux-2.6.30/kernel/futex.c 2009-06-11 20:55:34.643477901 +0200
-@@ -1985,9 +1985,11 @@
- * implementation, the non functional ones will return
- * -ENOSYS.
- */
-- curval = cmpxchg_futex_value_locked(NULL, 0, 0);
-- if (curval == -EFAULT)
-- futex_cmpxchg_enabled = 1;
-+ // exeption handler on ar7 is broken
-+ //curval = cmpxchg_futex_value_locked(NULL, 0, 0);
-+ //if (curval == -EFAULT)
-+ // futex_cmpxchg_enabled = 1;
-+ futex_cmpxchg_enabled = 0;
-
- for (i = 0; i < ARRAY_SIZE(futex_queues); i++) {
- plist_head_init(&futex_queues[i].chain, &futex_queues[i].lock);
-diff -Nur linux-2.6.30.orig/kernel/printk.c linux-2.6.30/kernel/printk.c
---- linux-2.6.30.orig/kernel/printk.c 2009-06-10 05:05:27.000000000 +0200
-+++ linux-2.6.30/kernel/printk.c 2009-06-11 20:55:34.643477901 +0200
-@@ -1272,6 +1272,7 @@
-
- static int __init disable_boot_consoles(void)
- {
-+ /* triggers reboot on ar7
- if (console_drivers != NULL) {
- if (console_drivers->flags & CON_BOOT) {
- printk(KERN_INFO "turn off boot console %s%d\n",
-@@ -1279,6 +1280,7 @@
- return unregister_console(console_drivers);
- }
- }
-+ */
- return 0;
- }
- late_initcall(disable_boot_consoles);
diff --git a/target/wag54g/uclibc.config b/target/wag54g/uclibc.config
index cefe27a63..24186882e 100644
--- a/target/wag54g/uclibc.config
+++ b/target/wag54g/uclibc.config
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Version: 0.9.30-svn
-# Sun Jun 14 15:49:39 2009
+# Version: 0.9.30.1
+# Sun Aug 23 20:28:49 2009
#
# TARGET_alpha is not set
# TARGET_arm is not set
@@ -60,7 +60,7 @@ UCLIBC_HAS_FLOATS=y
UCLIBC_HAS_FPU=y
DO_C99_MATH=y
UCLIBC_HAS_FENV=y
-KERNEL_HEADERS=""
+KERNEL_HEADERS="/home/wbx/lemote/toolchain_build_mipsel/libc_dev/usr/include"
HAVE_DOT_CONFIG=y
#
@@ -82,10 +82,8 @@ UCLIBC_CTOR_DTOR=y
# LDSO_GNU_HASH_SUPPORT is not set
# HAS_NO_THREADS is not set
UCLIBC_HAS_THREADS=y
-UCLIBC_HAS_TLS=y
# PTHREADS_DEBUG_SUPPORT is not set
-# LINUXTHREADS_OLD is not set
-UCLIBC_HAS_THREADS_NATIVE=y
+LINUXTHREADS_OLD=y
UCLIBC_HAS_SYSLOG=y
UCLIBC_HAS_LFS=y
# MALLOC is not set
@@ -96,7 +94,6 @@ UCLIBC_DYNAMIC_ATEXIT=y
COMPAT_ATEXIT=y
UCLIBC_SUSV3_LEGACY=y
# UCLIBC_SUSV3_LEGACY_MACROS is not set
-# UCLIBC_SUSV4_LEGACY is not set
# UCLIBC_HAS_STUBS is not set
UCLIBC_HAS_SHADOW=y
UCLIBC_HAS_PROGRAM_INVOCATION_NAME=y
@@ -146,8 +143,6 @@ UCLIBC_HAS_REENTRANT_RPC=y
UCLIBC_USE_NETLINK=y
UCLIBC_SUPPORT_AI_ADDRCONFIG=y
UCLIBC_HAS_BSD_RES_CLOSE=y
-UCLIBC_HAS_COMPAT_RES_STATE=y
-# UCLIBC_HAS_EXTRA_COMPAT_RES_STATE is not set
#
# String and Stdio Support
@@ -188,7 +183,6 @@ UCLIBC_HAS_ERRNO_MESSAGES=y
UCLIBC_HAS_SIGNUM_MESSAGES=y
# UCLIBC_HAS_SYS_SIGLIST is not set
UCLIBC_HAS_GNU_GETOPT=y
-# UCLIBC_HAS_STDIO_FUTEXES is not set
UCLIBC_HAS_GNU_GETSUBOPT=y
#
@@ -227,12 +221,13 @@ UCLIBC_BUILD_NOEXECSTACK=y
CROSS_COMPILER_PREFIX=""
UCLIBC_EXTRA_CFLAGS=""
# DODEBUG is not set
+# DODEBUG_PT is not set
DOSTRIP=y
# DOASSERTS is not set
-SUPPORT_LD_DEBUG=y
-SUPPORT_LD_DEBUG_EARLY=y
+# SUPPORT_LD_DEBUG is not set
+# SUPPORT_LD_DEBUG_EARLY is not set
# UCLIBC_MALLOC_DEBUGGING is not set
WARNINGS="-Wall"
-EXTRA_WARNINGS=y
+# EXTRA_WARNINGS is not set
# DOMULTI is not set
# UCLIBC_MJN3_ONLY is not set