diff options
19 files changed, 3677 insertions, 0 deletions
diff --git a/package/icinga/Makefile b/package/icinga/Makefile new file mode 100644 index 000000000..96d439e45 --- /dev/null +++ b/package/icinga/Makefile @@ -0,0 +1,29 @@ +# This file is part of the OpenADK project. OpenADK is copyrighted +# material, please see the LICENCE file in the top-level directory. + +include $(TOPDIR)/rules.mk + +PKG_NAME:= icinga +PKG_VERSION:= 1.6.1 +PKG_RELEASE:= 1 +PKG_MD5SUM:= 7b32e589235dd74ea020f12cbc90ec31 +PKG_DESCR:= network monitoring +PKG_SECTION:= net +PKG_DEPENDS:= mini-sendmail +PKG_URL:= http://www.icinga.org/ +PKG_SITES:= ${MASTER_SITE_SOURCEFORGE:=icinga/1.6.1/} + +include $(TOPDIR)/mk/package.mk + +$(eval $(call PKG_template,ICINGA,icinga,$(PKG_VERSION)-${PKG_RELEASE},${PKG_DEPENDS},${PKG_DESCR},${PKG_SECTION})) + +CONFIGURE_ARGS+= --sysconfdir=/etc/icinga + +icinga-install: + $(INSTALL_DIR) $(IDIR_ICINGA)/etc + $(CP) ./src/etc/icinga $(IDIR_ICINGA)/etc + $(INSTALL_DIR) $(IDIR_ICINGA)/usr/bin + $(INSTALL_BIN) $(WRKINST)/usr/bin/icinga \ + $(IDIR_ICINGA)/usr/bin + +include ${TOPDIR}/mk/pkg-bottom.mk diff --git a/package/icinga/files/icinga.init b/package/icinga/files/icinga.init new file mode 100644 index 000000000..239175ff2 --- /dev/null +++ b/package/icinga/files/icinga.init @@ -0,0 +1,35 @@ +#!/bin/sh +#PKG icinga +#INIT 80 +. /etc/rc.conf + +case $1 in +autostop) ;; +autostart) + test x"${icinga:-NO}" = x"NO" && exit 0 + exec sh $0 start + ;; +start) + [ -d /var/run/icinga ] || mkdir -p /var/run/icinga + [ -d /var/rw ] || mkdir -p /var/rw + [ -d /var/spool/checkresults ] || mkdir -p /var/spool/checkresults + touch /var/log/icinga.log + chown icinga:icinga /var/log/icinga.log + chown icinga:icinga /var/run/icinga + chown icinga:icinga /var/spool/checkresults + chown icinga:icinga /var/rw + icinga -d /etc/icinga/icinga.cfg + ;; +stop) + kill $(pgrep -f /usr/bin/icinga) + ;; +restart) + sh $0 stop + sh $0 start + ;; +*) + echo "Usage: $0 {start | stop | restart}" + exit 1 + ;; +esac +exit $? diff --git a/package/icinga/files/icinga.postinst b/package/icinga/files/icinga.postinst new file mode 100644 index 000000000..c0df0e7ea --- /dev/null +++ b/package/icinga/files/icinga.postinst @@ -0,0 +1,6 @@ +#!/bin/sh +. $IPKG_INSTROOT/etc/functions.sh +add_rcconf icinga icinga NO +gid=$(get_next_gid) +add_group icinga $gid +add_user icinga $(get_next_uid) $gid /etc/icinga diff --git a/package/icinga/patches/patch-configure b/package/icinga/patches/patch-configure new file mode 100644 index 000000000..170349f85 --- /dev/null +++ b/package/icinga/patches/patch-configure @@ -0,0 +1,20 @@ +--- icinga-1.6.1.orig/configure 2011-12-02 14:53:23.000000000 +0100 ++++ icinga-1.6.1/configure 2011-12-02 23:44:13.000000000 +0100 +@@ -5154,7 +5154,7 @@ cat >>confdefs.h <<_ACEOF + #define DEFAULT_NAGIOS_GROUP "$icinga_grp" + _ACEOF + +-INSTALL_OPTS="-o $icinga_user -g $icinga_grp" ++#INSTALL_OPTS="-o $icinga_user -g $icinga_grp" + + + +@@ -5232,7 +5232,7 @@ fi + + + +-INSTALL_OPTS_WEB="-o $web_user -g $web_group" ++#INSTALL_OPTS_WEB="-o $web_user -g $web_group" + + + diff --git a/package/icinga/patches/patch-configure.orig b/package/icinga/patches/patch-configure.orig new file mode 100644 index 000000000..c27f5b420 --- /dev/null +++ b/package/icinga/patches/patch-configure.orig @@ -0,0 +1,11 @@ +--- icinga-1.6.1.orig/configure 2011-12-02 14:53:23.000000000 +0100 ++++ icinga-1.6.1/configure 2011-12-02 23:41:56.000000000 +0100 +@@ -5154,7 +5154,7 @@ cat >>confdefs.h <<_ACEOF + #define DEFAULT_NAGIOS_GROUP "$icinga_grp" + _ACEOF + +-INSTALL_OPTS="-o $icinga_user -g $icinga_grp" ++#INSTALL_OPTS="-o $icinga_user -g $icinga_grp" + + + diff --git a/package/icinga/src/etc/icinga/cgi.cfg b/package/icinga/src/etc/icinga/cgi.cfg new file mode 100644 index 000000000..35057eb75 --- /dev/null +++ b/package/icinga/src/etc/icinga/cgi.cfg @@ -0,0 +1,653 @@ +################################################################# +# +# CGI.CFG - Sample CGI Configuration File for Icinga +# +################################################################# + + +# MAIN CONFIGURATION FILE +# This tells the CGIs where to find your main configuration file. +# The CGIs will read the main and host config files for any other +# data they might need. + +main_config_file=/etc/icinga/icinga.cfg + + +# ATTRIBUTE BASED AUTHORIZATION FILE +# This option will include a file defining authroization based on +# attributes. + +#authorization_config_file=/etc/icinga/cgiauth.cfg + + +# PHYSICAL HTML PATH +# This is the path where the HTML files for Icinga reside. This +# value is used to locate the logo images needed by the statusmap +# and statuswrl CGIs. + +physical_html_path=/usr/share + + + +# URL HTML PATH +# This is the path portion of the URL that corresponds to the +# physical location of the Icinga HTML files (as defined above). +# This value is used by the CGIs to locate the online documentation +# and graphics. If you access the Icinga pages with an URL like +# http://www.myhost.com/icinga, this value should be '/icinga' +# (without the quotes). + +url_html_path=/icinga + + + +# URL STYLESHEETS PATH +# This option allows to define an url stylesheet path other than the +# default ($url_html_path/stylesheets). This will be useful when +# adding custom stylesheets in another location. +# If not set, the default location will be used. + +url_stylesheets_path=/icinga/stylesheets + + + +# HTTP CHARSET +# This defines charset that is sent with HTTP headers. + +http_charset=utf-8 + + + +# CONTEXT-SENSITIVE HELP +# This option determines whether or not a context-sensitive +# help icon will be displayed for most of the CGIs. +# Values: 0 = disables context-sensitive help +# 1 = enables context-sensitive help + +show_context_help=0 + + + +# HIGHLIGHT TABLE ROWS +# This option allows you to define if table rows in status.cgi +# will be highlighted or not. +# Values: 0 = disables row highlighting +# 1 = enables row highlighting + +highlight_table_rows=1 + + + +# PENDING STATES OPTION +# This option determines what states should be displayed in the web +# interface for hosts/services that have not yet been checked. +# Values: 0 = leave hosts/services that have not been check yet in their original state +# 1 = mark hosts/services that have not been checked yet as PENDING + +use_pending_states=1 + + +# Logging + +# USE LOGGING +# If you want to log information from cgi's (e.g. all submitted commands) +# then set this option to 1, default is 0 (off). +# WARNING: +# This log is highly experimental and changes may occure without notice. Use at your own risk!! + +use_logging=0 + + +# CGI LOG FILE +# This is the cgi log file for information about what users are doing. +# At the moment only submitted commands from cmd.cgi will be logged. + +cgi_log_file=/usr/share/log/icinga-cgi.log + + +# CGI LOG ROTATION METHOD +# This is the log rotation method that should be used to rotate +# the cgi log file. Values are as follows.. +# n = None - don't rotate the log +# h = Hourly rotation (top of the hour) +# d = Daily rotation (midnight every day) +# w = Weekly rotation (midnight on Saturday evening) +# m = Monthly rotation (midnight last day of month) + +cgi_log_rotation_method=d + + +# CGI LOG ARCHIVE PATH +# This is the directory where archived (rotated) cgi log files should be +# placed (assuming you've chosen to do log rotation). + +cgi_log_archive_path=/usr/share/log + + +# FORCE COMMENT +# This option forces the users of to comment every action they perform. +# The comments get logged into cgi log file. This option only has effect +# if logging is switched on. See option "use_logging" +# Default is 0 (off), to activate it set it to 1 (on). + +enforce_comments_on_actions=0 + + +# FIRST DAY OF WEEK +# Here you can set if your week starts on sunday or monday. +# Default is 0 (Sunday), set it to 1 if your week start monday. + +first_day_of_week=0 + + +# AUTHENTICATION USAGE +# This option controls whether or not the CGIs will use any +# authentication when displaying host and service information, as +# well as committing commands to Icinga for processing. +# +# Read the HTML documentation to learn how the authorization works! +# +# NOTE: It is a really *bad* idea to disable authorization, unless +# you plan on removing the command CGI (cmd.cgi)! Failure to do +# so will leave you wide open to kiddies messing with Icinga and +# possibly hitting you with a denial of service attack by filling up +# your drive by continuously writing to your command file! +# +# Setting this value to 0 will cause the CGIs to *not* use +# authentication (bad idea), while any other value will make them +# use the authentication functions (the default). + +use_authentication=1 + + + + +# x509 CERT AUTHENTICATION +# When enabled, this option allows you to use x509 cert (SSL) +# authentication in the CGIs. This is an advanced option and should +# not be enabled unless you know what you're doing. + +use_ssl_authentication=0 + + + + +# DEFAULT USER +# Setting this variable will define a default user name that can +# access pages without authentication. This allows people within a +# secure domain (i.e., behind a firewall) to see the current status +# without authenticating. You may want to use this to avoid basic +# authentication if you are not using a secure server since basic +# authentication transmits passwords in the clear. +# +# Important: Do not define a default username unless you are +# running a secure web server and are sure that everyone who has +# access to the CGIs has been authenticated in some manner! If you +# define this variable, anyone who has not authenticated to the web +# server will inherit all rights you assign to this user! + +#default_user_name=guest + + + +# SYSTEM/PROCESS INFORMATION ACCESS +# This option is a comma-delimited list of all usernames that +# have access to viewing the Icinga process information as +# provided by the Extended Information CGI (extinfo.cgi). By +# default, *no one* has access to this unless you choose to +# not use authorization. You may use an asterisk (*) to +# authorize any user who has authenticated to the web server. +# Alternatively you can specify contactgroups too, starting +# with Icinga 1.5.0 + +authorized_for_system_information=icingaadmin +#authorized_contactgroup_for_system_information= + + +# CONFIGURATION INFORMATION ACCESS +# This option is a comma-delimited list of all usernames that +# can view ALL configuration information (hosts, commands, etc). +# By default, users can only view configuration information +# for the hosts and services they are contacts for. You may use +# an asterisk (*) to authorize any user who has authenticated +# to the web server. +# Alternatively you can specify contactgroups too, starting +# with Icinga 1.5.0 + +authorized_for_configuration_information=icingaadmin +#authorized_contactgroup_for_configuration_information= + + +# RAW COMMANDLINE CONFIGURATION INFORMATION ACCESS +# This option is a comma-delimited list of all usernames that +# can view a command in config command expander as icinga would +# execute it. To resolve all MACROS it is necessary to allow +# read access to the web server for resource.cfg . +# CAUTION: $USERXX$ vars and custom vars can contain sensitive +# data. +# Alternatively you can specify contactgroups too. + +authorized_for_full_command_resolution=icingaadmin +#authorized_contactgroup_for_full_command_resolution= + + +# SYSTEM/PROCESS COMMAND ACCESS +# This option is a comma-delimited list of all usernames that +# can issue shutdown and restart commands to Icinga via the +# command CGI (cmd.cgi). Users in this list can also change +# the program mode to active or standby. By default, *no one* +# has access to this unless you choose to not use authorization. +# You may use an asterisk (*) to authorize any user who has +# authenticated to the web server. +# Alternatively you can specify contactgroups too, starting +# with Icinga 1.5.0 + +authorized_for_system_commands=icingaadmin +#authorized_contactgroup_for_system_commands= + + +# GLOBAL HOST/SERVICE VIEW ACCESS +# These two options are comma-delimited lists of all usernames that +# can view information for all hosts and services that are being +# monitored. By default, users can only view information +# for hosts or services that they are contacts for (unless you +# you choose to not use authorization). You may use an asterisk (*) +# to authorize any user who has authenticated to the web server. +# Alternatively you can specify contactgroups too, starting +# with Icinga 1.5.0 + + +authorized_for_all_services=icingaadmin +authorized_for_all_hosts=icingaadmin +#authorized_contactgroup_for_all_services= +#authorized_contactgroup_for_all_hosts= + + +# GLOBAL HOST/SERVICE COMMAND ACCESS +# These two options are comma-delimited lists of all usernames that +# can issue host or service related commands via the command +# CGI (cmd.cgi) for all hosts and services that are being monitored. +# By default, users can only issue commands for hosts or services +# that they are contacts for (unless you you choose to not use +# authorization). You may use an asterisk (*) to authorize any +# user who has authenticated to the web server. +# Alternatively you can specify contactgroups too, starting +# with Icinga 1.5.0 + +authorized_for_all_service_commands=icingaadmin +authorized_for_all_host_commands=icingaadmin +#authorized_contactgroup_for_all_service_commands= +#authorized_contactgroup_for_all_host_commands= + + +# READ-ONLY USERS +# A comma-delimited list of usernames that have read-only rights in +# the CGIs. This will block any service or host commands normally shown +# on the extinfo CGI pages. It will also block comments from being shown +# to read-only users. +# Alternatively you can specify contactgroups too, starting +# with Icinga 1.5.0 + +#authorized_for_read_only=user1,user2 +#authorized_contactgroup_for_read_only= + + +# SHOW ALL SERVICES THE HOST IS AUTHORIZED FOR +# By default, a user can see all services on a host, if the user is +# authorized as contact for the host only. By disabling this option, +# the user must be an authorized contact for the service too in order +# to view it. +# Values: 0 - disabled, user must be authorized for services too +# 1 - enabled, user can view all services on authorized host + +show_all_services_host_is_authorized_for=1 + + +# SHOW PARTIAL HOSTGROUPS +# By default, a user only sees a hostgroup and the hosts within it if +# they are an authorized contact for all of the hosts of the group. By +# enabling this option hostgroups will show a partial listing of hosts +# the user is an authorized contact for in the hostgroups. +# Values: 0 - disabled, user only sees full hostgroups (default) +# 1 - enabled, user sees partial hostgroups + +show_partial_hostgroups=0 + + +# STATUSMAP BACKGROUND IMAGE +# This option allows you to specify an image to be used as a +# background in the statusmap CGI. It is assumed that the image +# resides in the HTML images path (i.e. /usr/local/icinga/share/images). +# This path is automatically determined by appending "/images" +# to the path specified by the 'physical_html_path' directive. +# Note: The image file may be in GIF, PNG, JPEG, or GD2 format. +# However, I recommend that you convert your image to GD2 format +# (uncompressed), as this will cause less CPU load when the CGI +# generates the image. + +#statusmap_background_image=smbackground.gd2 + + + + +# STATUSMAP TRANSPARENCY INDEX COLOR +# These options set the r,g,b values of the background color used the statusmap CGI, +# so normal browsers that can't show real png transparency set the desired color as +# a background color instead (to make it look pretty). +# Defaults to white: (R,G,B) = (255,255,255). + +#color_transparency_index_r=255 +#color_transparency_index_g=255 +#color_transparency_index_b=255 + + + + +# DEFAULT STATUSMAP LAYOUT METHOD +# This option allows you to specify the default layout method +# the statusmap CGI should use for drawing hosts. If you do +# not use this option, the default is to use user-defined +# coordinates. Valid options are as follows: +# 0 = User-defined coordinates +# 1 = Depth layers +# 2 = Collapsed tree +# 3 = Balanced tree +# 4 = Circular +# 5 = Circular (Marked Up) + +default_statusmap_layout=5 + + + +# DEFAULT STATUSWRL LAYOUT METHOD +# This option allows you to specify the default layout method +# the statuswrl (VRML) CGI should use for drawing hosts. If you +# do not use this option, the default is to use user-defined +# coordinates. Valid options are as follows: +# 0 = User-defined coordinates +# 2 = Collapsed tree +# 3 = Balanced tree +# 4 = Circular + +default_statuswrl_layout=4 + + + +# STATUSWRL INCLUDE +# This option allows you to include your own objects in the +# generated VRML world. It is assumed that the file +# resides in the HTML path (i.e. /usr/local/icinga/share). + +#statuswrl_include=myworld.wrl + + + +# PING SYNTAX +# This option determines what syntax should be used when +# attempting to ping a host from the WAP interface (using +# the statuswml CGI. You must include the full path to +# the ping binary, along with all required options. The +# $HOSTADDRESS$ macro is substituted with the address of +# the host before the command is executed. +# Please note that the syntax for the ping binary is +# notorious for being different on virtually ever *NIX +# OS and distribution, so you may have to tweak this to +# work on your system. + +ping_syntax=/bin/ping -n -U -c 5 $HOSTADDRESS$ + + + +# REFRESH RATE +# This option allows you to specify the refresh rate in seconds +# of various CGIs (status, statusmap, extinfo, and outages). + +refresh_rate=90 + + + +# ESCAPE HTML TAGS +# This option determines whether HTML tags in host and service +# status output is escaped in the web interface. If enabled, +# your plugin output will not be able to contain clickable links. + +escape_html_tags=1 + + + +# PERSISTENT ACKNOWLEDGEMENT COMMENTS +# This options determines whether the initial state of the +# checkbox "Persistent Comment:" for service and host problem +# acknowledgements is checked or unchecked + +persistent_ack_comments=0 + + +# SOUND OPTIONS +# These options allow you to specify an optional audio file +# that should be played in your browser window when there are +# problems on the network. The audio files are used only in +# the status CGI. Only the sound for the most critical problem +# will be played. Order of importance (higher to lower) is as +# follows: unreachable hosts, down hosts, critical services, +# warning services, and unknown services. If there are no +# visible problems, the sound file optionally specified by +# 'normal_sound' variable will be played. +# +# +# <varname>=<sound_file> +# +# Note: All audio files must be placed in the /media subdirectory +# under the HTML path (i.e. /usr/local/icinga/share/media/). + +#host_unreachable_sound=hostdown.wav +#host_down_sound=hostdown.wav +#service_critical_sound=critical.wav +#service_warning_sound=warning.wav +#service_unknown_sound=warning.wav +#normal_sound=noproblem.wav + + + +# URL TARGET FRAMES +# These options determine the target frames in which notes and +# action URLs will open. Default is main frame. + +action_url_target=main +notes_url_target=main +#action_url_target=_blank +#notes_url_target=_blank + + + + +# LOCK AUTHOR NAMES OPTION +# This option determines whether users can change the author name +# when submitting comments, scheduling downtime. If disabled, the +# author names will be locked into their contact name, as defined in Icinga. +# Values: 0 = allow editing author names +# 1 = lock author names (disallow editing) + +lock_author_names=1 + + + +# DEFAULT DOWNTIME DURATION +# This option defines the default duration (in seconds) of fixed and +# flexible downtimes. Default is 7200 seconds (2 hours). + +default_downtime_duration=7200 + + + +# DEFAULT EXPIRING ACKNOWLEDGEMENT DURATION +# This option defines the default duration (in seconds) of a expiring +# acknowledgement. Default is 86400 seconds (1 day). + +default_expiring_acknowledgement_duration=86400 + + + +# SHOW LONG PLUGIN OUTPUT IN STATUS OPTION +# This option allows you to specify the length of status information +# in output of status.cgi. If you set the value to 1 it shows the +# full plugin output instead of the first line only. +# Default value is 0. + +status_show_long_plugin_output=0 + + + +# SHOW ONLY HARD STATES IN TAC OPTION +# This options allows you to specify if the tactical overview +# should only show hard states on hosts and services. +# By default disabled, all states will be shown. + +tac_show_only_hard_state=0 + + + +# SHOW CHILD HOSTS IN EXTINFO OPTION +# This Option allows you to specify if the extended host information +# cgi will show child hosts for the selected host. +# 0 = disabled +# 1 = only show immediate child hosts +# 2 = show immediate and all child hosts +# NOTE: Option 2 could be a real performance killer in +# large installations, so use with care. +# By default disabled, as this could be a performance killer. + +extinfo_show_child_hosts=0 + + + +# SUPPRESS MAINTENANCE DOWNTIME +# This options suppresses the state coloring of hosts and services +# that are in a scheduled downtime. It sets their coloring to gray, +# so they no longer draw extra attention to themselves, making it +# so only actual problems are the ones that stand out. +# By default it is disabled. + +suppress_maintenance_downtime=0 + + +# SHOW TAC INFORMATION IN TOP FRAME +# This options places tactical overview information in +# the top frame similar to the view that's in icinga-web. +# By default it is enabled. + +show_tac_header=1 + + +# SHOW PENDING IN TAC HEADER +# This options enables the display of pending counts in +# the tac header. If your display is less than 1024x768 +# and this is enabled, the tactical information may not +# fit well in the top frame. +# By default it is enabled. + +show_tac_header_pending=1 + + + +# SHOW INITIAL STATES IN SHOWLOG OPTION +# This options allows you to specify if initial states +# of hosts and services should be shown in showlog.cgi +# Note: This Option only works if the option +# "log_initial_states" in icinga.cfg is set to 1. +# By default it's enabled. Default is 0. + +#showlog_initial_states=0 + + + +# SHOW CURRENT STATES IN SHOWLOG OPTION +# This options allows you to specify if current states +# of hosts and services should be shown in showlog.cgi +# Note: This Option only works if the option +# "log_current_states" in icinga.cfg is set to 1. +# By default it's enabled. Default is 0. + +#showlog_current_states=0 + + + +# CSV DELIMITER +# This option determines the character which should act as +# delimiter. Default is ";". + +#csv_delimiter=; + + + +# CSV DATA ENCLOSURE +# This option determines the character which should act as +# data enclosure to wrap in the data. Default is "'". + +#csv_data_enclosure=' + + + +# TAB-FRIENDLY <TITLE>S +# Activating this option changes the <title> of status.cgi +# and extinfo.cgi when they refer to a single host, service, +# or group. They will then read: +# [Host] +# {HostGroup} +# ServiceDesc @ Host +# (ServiceGroup) +# These are easier to read and find if you use (many) tabs +# in your browser. +# Default is enabled. 0=disabled, 1=enabled + +tab_friendly_titles=1 + + +# SERVICE STATES TO ANNOTATE WITH CURRENT NOTIFICATION NO. +# Set this to an OR of the service state identifiers for +# which status.cgi should not only report "Attempts" (e.g., +# "3/3" for a HARD non-OK state with max_check_attempts=3) +# but also the current notification number ("(#0)" if no +# problem notification has been sent yet, etc.). This is +# helpful to identify services which switched between +# different non-OK states a lot, or services which have a +# first_notification_delay set and are "not yet officially" +# considered in trouble. +# Relevant values from include/statusdata.h (look them up +# *there* if you want to be *really* sure): +# #define SERVICE_PENDING 1 +# #define SERVICE_OK 2 +# #define SERVICE_WARNING 4 +# #define SERVICE_UNKNOWN 8 +# #define SERVICE_CRITICAL 16 +# You'll likely want to use add_notif_num_hard=0 (default) +# or add_notif_num_hard=28 (warn+crit+unknown). There's an +# add_notif_num_soft affecting services in a SOFT state +# for sake of completeness, too. + +#add_notif_num_hard=28 +#add_notif_num_soft=0 + + + +# SPLUNK INTEGRATION OPTIONS +# These options allow you to enable integration with Splunk +# in the web interface. If enabled, you'll be presented with +# "Splunk It" links in various places in the CGIs (log file, +# alert history, host/service detail, etc). Useful if you're +# trying to research why a particular problem occurred. +# For more information on Splunk, visit http://www.splunk.com/ + +# This option determines whether the Splunk integration is enabled +# Values: 0 = disable Splunk integration +# 1 = enable Splunk integration + +#enable_splunk_integration=1 + + +# This option should be the URL used to access your instance of Splunk + +#splunk_url=http://127.0.0.1:8000/ + + + diff --git a/package/icinga/src/etc/icinga/cgiauth.cfg b/package/icinga/src/etc/icinga/cgiauth.cfg new file mode 100644 index 000000000..705852959 --- /dev/null +++ b/package/icinga/src/etc/icinga/cgiauth.cfg @@ -0,0 +1,8 @@ +#urn:your:name:testicinga:host1admin=switch1:PING:r +#urn:your:name:testicinga:host1admin=*:PING +#urn:your:name:testicinga:host1admin=localhost:PING +#urn:your:name:testicinga:host1admin=localhost:Swap Usage:r +#urn:your:name:testicinga:superadmin=*:*:w +#urn:your:name:testicinga:host1admin=@core-switches,@linux-servers:*:r +#urn:your:name:testicinga:host1admin=@core-routers,@core-switches:@LDAP:w +#urn:your:name:testicinga:host1admin=@core-routers,@core-switches,@linux-servers:@DNS:r diff --git a/package/icinga/src/etc/icinga/icinga.cfg b/package/icinga/src/etc/icinga/icinga.cfg new file mode 100644 index 000000000..a95462293 --- /dev/null +++ b/package/icinga/src/etc/icinga/icinga.cfg @@ -0,0 +1,1484 @@ +############################################################################## +# +# ICINGA.CFG - Sample Main Config File for Icinga +# +# Read the documentation for more information on this configuration +# file. I've provided some comments here, but things may not be so +# clear without further explanation. +# +############################################################################## + + +# LOG FILE +# This is the main log file where service and host events are logged +# for historical purposes. This should be the first option specified +# in the config file!!! + +log_file=/var/log/icinga.log + + + +# OBJECT CONFIGURATION FILE(S) +# These are the object configuration files in which you define hosts, +# host groups, contacts, contact groups, services, etc. +# You can split your object definitions across several config files +# if you wish (as shown below), or keep them all in a single config file. + +# You can specify individual object config files as shown below: +cfg_file=/etc/icinga/objects/commands.cfg +cfg_file=/etc/icinga/objects/contacts.cfg +cfg_file=/etc/icinga/objects/timeperiods.cfg +cfg_file=/etc/icinga/objects/templates.cfg + +# Definitions for monitoring the local (Linux) host +cfg_file=/etc/icinga/objects/localhost.cfg + +# Definitions for monitoring a Windows machine +#cfg_file=/etc/icinga/objects/windows.cfg + +# Definitions for monitoring a router/switch +#cfg_file=/etc/icinga/objects/switch.cfg + +# Definitions for monitoring a network printer +#cfg_file=/etc/icinga/objects/printer.cfg + +# Definitions for ido2db process checks +#cfg_file=/etc/icinga/objects/ido2db_check_proc.cfg + +# You can also tell Icinga to process all config files (with a .cfg +# extension) in a particular directory by using the cfg_dir +# directive as shown below: + +#cfg_dir=/etc/icinga/servers +#cfg_dir=/etc/icinga/printers +#cfg_dir=/etc/icinga/switches +#cfg_dir=/etc/icinga/routers + +# Definitions for broker modules like idoutils.cfg +cfg_dir=/etc/icinga/modules + + + +# OBJECT CACHE FILE +# This option determines where object definitions are cached when +# Icinga starts/restarts. The CGIs read object definitions from +# this cache file (rather than looking at the object config files +# directly) in order to prevent inconsistencies that can occur +# when the config files are modified after Icinga starts. + +object_cache_file=/var/objects.cache + + + +# PRE-CACHED OBJECT FILE +# This options determines the location of the precached object file. +# If you run Icinga with the -p command line option, it will preprocess +# your object configuration file(s) and write the cached config to this +# file. You can then start Icinga with the -u option to have it read +# object definitions from this precached file, rather than the standard +# object configuration files (see the cfg_file and cfg_dir options above). +# Using a precached object file can speed up the time needed to (re)start +# the Icinga process if you've got a large and/or complex configuration. +# Read the documentation section on optimizing Icinga to find our more +# about how this feature works. + +precached_object_file=/var/objects.precache + + + +# RESOURCE FILE +# This is an optional resource file that contains $USERx$ macro +# definitions. Multiple resource files can be specified by using +# multiple resource_file definitions. The CGIs will not attempt to +# read the contents of resource files, so information that is +# considered to be sensitive (usernames, passwords, etc) can be +# defined as macros in this file and restrictive permissions (600) +# can be placed on this file. + +resource_file=/etc/icinga/resource.cfg + + + +# STATUS FILE +# This is where the current status of all monitored services and +# hosts is stored. Its contents are read and processed by the CGIs. +# The contents of the status file are deleted every time Icinga +# restarts. + +status_file=/var/run/icinga/status.dat + + + +# STATUS FILE UPDATE INTERVAL +# This option determines the frequency (in seconds) that +# Icinga will periodically dump program, host, and +# service status data. +# Increase the value, if you don't require it that often. + +#status_update_interval=30 +status_update_interval=10 + + + +# ICINGA USER +# This determines the effective user that Icinga should run as. +# You can either supply a username or a UID. + +icinga_user=icinga + + + +# ICINGA GROUP +# This determines the effective group that Icinga should run as. +# You can either supply a group name or a GID. + +icinga_group=icinga + + + +# EXTERNAL COMMAND OPTION +# This option allows you to specify whether or not Icinga should check +# for external commands (in the command file defined below). By default +# Icinga will *not* check for external commands, just to be on the +# cautious side. If you want to be able to use the CGI command interface +# you will have to enable this. +# Values: 0 = disable commands, 1 = enable commands + +check_external_commands=1 + + + +# EXTERNAL COMMAND CHECK INTERVAL +# This is the interval at which Icinga should check for external commands. +# This value works of the interval_length you specify later. If you leave +# that at its default value of 60 (seconds), a value of 1 here will cause +# Icinga to check for external commands every minute. If you specify a +# number followed by an "s" (i.e. 15s), this will be interpreted to mean +# actual seconds rather than a multiple of the interval_length variable. +# Note: In addition to reading the external command file at regularly +# scheduled intervals, Icinga will also check for external commands after +# event handlers are executed. +# NOTE: Setting this value to -1 causes Icinga to check the external +# command file as often as possible. + +#command_check_interval=15s +command_check_interval=-1 + + + +# EXTERNAL COMMAND FILE +# This is the file that Icinga checks for external command requests. +# It is also where the command CGI will write commands that are submitted +# by users, so it must be writeable by the user that the web server +# is running as (usually 'nobody'). Permissions should be set at the +# directory level instead of on the file, as the file is deleted every +# time its contents are processed. + +command_file=/var/rw/icinga.cmd + + + +# EXTERNAL COMMAND BUFFER SLOTS +# This settings is used to tweak the number of items or "slots" that +# the Icinga daemon should allocate to the buffer that holds incoming +# external commands before they are processed. As external commands +# are processed by the daemon, they are removed from the buffer. +# Increase the value, if you are using addons like check_mk supplying +# more external commands (passive check results) than usual. + +#external_command_buffer_slots=32768 +external_command_buffer_slots=4096 + + + +# LOCK FILE +# This is the lockfile that Icinga will use to store its PID number +# in when it is running in daemon mode. + +lock_file=/var/icinga.lock + + + +# TEMP FILE +# This is a temporary file that is used as scratch space when Icinga +# updates the status log, cleans the comment file, etc. This file +# is created, used, and deleted throughout the time that Icinga is +# running. + +temp_file=/var/icinga.tmp + + + +# TEMP PATH +# This is path where Icinga can create temp files for service and +# host check results, etc. + +temp_path=/tmp + + + +# EVENT BROKER OPTIONS +# Controls what (if any) data gets sent to the event broker. +# Values: 0 = Broker nothing +# -1 = Broker everything +# <other> = See documentation + +event_broker_options=-1 + + + +# EVENT BROKER MODULE(S) +# This directive is used to specify an event broker module that should +# by loaded by Icinga at startup. Use multiple directives if you want +# to load more than one module. Arguments that should be passed to +# the module at startup are seperated from the module path by a space. +# +#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! +# WARNING !!! WARNING !!! WARNING !!! WARNING !!! WARNING !!! WARNING +#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! +# +# Do NOT overwrite modules while they are being used by Icinga or Icinga +# will crash in a fiery display of SEGFAULT glory. This is a bug/limitation +# either in dlopen(), the kernel, and/or the filesystem. And maybe Icinga... +# +# The correct/safe way of updating a module is by using one of these methods: +# 1. Shutdown Icinga, replace the module file, restart Icinga +# 2. Delete the original module file, move the new module file into place, restart Icinga +# +# Example: +# +# broker_module=<modulepath> [moduleargs] + +#broker_module=/somewhere/module1.o +#broker_module=/somewhere/module2.o arg1 arg2=3 debug=0 + +# Uncomment this to enable idomod.o +#broker_module=/usr/bin/idomod.o config_file=/etc/icinga/idomod.cfg + + + +# LOG ROTATION METHOD +# This is the log rotation method that Icinga should use to rotate +# the main log file. Values are as follows.. +# n = None - don't rotate the log +# h = Hourly rotation (top of the hour) +# d = Daily rotation (midnight every day) +# w = Weekly rotation (midnight on Saturday evening) +# m = Monthly rotation (midnight last day of month) + +log_rotation_method=d + + + +# LOG ARCHIVE PATH +# This is the directory where archived (rotated) log files should be +# placed (assuming you've chosen to do log rotation). + +log_archive_path=/var/archives + + + +# LOGGING OPTIONS FOR DAEMON +# If you want messages logged to the daemon log file (usually icinga.log). +# Default option is 1 (yes), the other valid option is 0 (no) + +use_daemon_log=1 + + + +# LOGGING OPTIONS FOR SYSLOG +# If you want messages logged to the syslog facility, as well as the +# Icinga log file set this option to 1. If not, set it to 0. + +use_syslog=1 + + + +# SYSLOG FACILITY +# If you enabled use_syslog you can set icinga to use a local facility +# instead of the default.To enable set this option to 1, if not, set it to 0. + +use_syslog_local_facility=0 + + + +# SYSLOG LOCAL FACILITY +# If you specified the use_syslog_local_facility you can chose which +# local facility to use. Valid values are from 0 to 7 + +syslog_local_facility=5 + + + +# NOTIFICATION LOGGING OPTION +# If you don't want notifications to be logged, set this value to 0. +# If notifications should be logged, set the value to 1. + +log_notifications=1 + + + +# SERVICE RETRY LOGGING OPTION +# If you don't want service check retries to be logged, set this value +# to 0. If retries should be logged, set the value to 1. + +log_service_retries=1 + + + +# HOST RETRY LOGGING OPTION +# If you don't want host check retries to be logged, set this value to +# 0. If retries should be logged, set the value to 1. + +log_host_retries=1 + + + +# EVENT HANDLER LOGGING OPTION +# If you don't want host and service event handlers to be logged, set +# this value to 0. If event handlers should be logged, set the value +# to 1. + +log_event_handlers=1 + + + +# INITIAL STATES LOGGING OPTION +# If you want Icinga to log all initial host and service states to +# the main log file (the first time the service or host is checked) +# you can enable this option by setting this value to 1. If you +# are not using an external application that does long term state +# statistics reporting, you do not need to enable this option. In +# this case, set the value to 0. + +log_initial_states=0 + + + +# CURRENT STATES LOGGING OPTION +# If you don't want Icinga to log all current host and service states +# after log has been rotated to the main log file, you can disable this +# option by setting this value to 0. Default value is 1. + +log_current_states=1 + + + +# EXTERNAL COMMANDS LOGGING OPTION +# If you don't want Icinga to log external commands, set this value +# to 0. If external commands should be logged, set this value to 1. +# Note: This option does not include logging of passive service +# checks - see the option below for controlling whether or not +# passive checks are logged. + +log_external_commands=1 + + + +# PASSIVE CHECKS LOGGING OPTION +# If you don't want Icinga to log passive host and service checks, set +# this value to 0. If passive checks should be logged, set +# this value to 1. + +log_passive_checks=1 + + + +# LOG EXTERNAL COMMAND USER - THIS WILL BE DEPRECATED!!! +# Future Icinga versions after 1.5 will ignore this config option, +# use the CGI logging feature instead (or any other logger/wrapper +# to the command pipe). +# +# This option allows you to enable the logging of the current user +# of external commands. +# The syntax will be CMD;username;cmdargs instead of CMD;cmdargs +# written to the logs, if the external application sends that +# correctly. +# Since this will break compatibility with existing log parsers, +# it is intentionally disabled by default. + +log_external_commands_user=0 + + + +# LONG PLUGIN OUTPUT LOGGING OPTION +# If you want Icinga to log the complete text of the plugin output +# to the log instead of only the first line then set this value to 1. +# Default value is 0. + +log_long_plugin_output=0 + + + +# GLOBAL HOST AND SERVICE EVENT HANDLERS +# These options allow you to specify a host and service event handler +# command that is to be run for every host or service state change. +# The global event handler is executed immediately prior to the event +# handler that you have optionally specified in each host or +# service definition. The command argument is the short name of a +# command definition that you define in your host configuration file. +# Read the HTML docs for more information. + +#global_host_event_handler=somecommand +#global_service_event_handler=somecommand + + + +# SERVICE INTER-CHECK DELAY METHOD +# This is the method that Icinga should use when initially +# "spreading out" service checks when it starts monitoring. The +# default is to use smart delay calculation, which will try to +# space all service checks out evenly to minimize CPU load. +# Using the dumb setting will cause all checks to be scheduled +# at the same time (with no delay between them)! This is not a +# good thing for production, but is useful when testing the +# parallelization functionality. +# n = None - don't use any delay between checks +# d = Use a "dumb" delay of 1 second between checks +# s = Use "smart" inter-check delay calculation +# x.xx = Use an inter-check delay of x.xx seconds + +service_inter_check_delay_method=s + + + +# MAXIMUM SERVICE CHECK SPREAD +# This variable determines the timeframe (in minutes) from the +# program start time that an initial check of all services should +# be completed. Default is 30 minutes. + +max_service_check_spread=30 + + + +# SERVICE CHECK INTERLEAVE FACTOR +# This variable determines how service checks are interleaved. +# Interleaving the service checks allows for a more even +# distribution of service checks and reduced load on remote +# hosts. Setting this value to 1 is equivalent to how versions +# of Icinga previous to 0.0.5 did service checks. Set this +# value to s (smart) for automatic calculation of the interleave +# factor unless you have a specific reason to change it. +# s = Use "smart" interleave factor calculation +# x = Use an interleave factor of x, where x is a +# number greater than or equal to 1. + +service_interleave_factor=s + + + +# HOST INTER-CHECK DELAY METHOD +# This is the method that Icinga should use when initially +# "spreading out" host checks when it starts monitoring. The +# default is to use smart delay calculation, which will try to +# space all host checks out evenly to minimize CPU load. +# Using the dumb setting will cause all checks to be scheduled +# at the same time (with no delay between them)! +# n = None - don't use any delay between checks +# d = Use a "dumb" delay of 1 second between checks +# s = Use "smart" inter-check delay calculation +# x.xx = Use an inter-check delay of x.xx seconds + +host_inter_check_delay_method=s + + + +# MAXIMUM HOST CHECK SPREAD +# This variable determines the timeframe (in minutes) from the +# program start time that an initial check of all hosts should +# be completed. Default is 30 minutes. + +max_host_check_spread=30 + + + +# MAXIMUM CONCURRENT SERVICE CHECKS +# This option allows you to specify the maximum number of +# service checks that can be run in parallel at any given time. +# Specifying a value of 1 for this variable essentially prevents +# any service checks from being parallelized. A value of 0 +# will not restrict the number of concurrent checks that are +# being executed. + +max_concurrent_checks=0 + + + +# HOST AND SERVICE CHECK REAPER FREQUENCY +# This is the frequency (in seconds!) that Icinga will process +# the results of host and service checks. +# Lower this value in larger environments to allow faster +# check result processing (requires more cpu power). + +#check_result_reaper_frequency=1 +check_result_reaper_frequency=10 + + + + +# MAX CHECK RESULT REAPER TIME +# This is the max amount of time (in seconds) that a single +# check result reaper event will be allowed to run before +# returning control back to Icinga so it can perform other +# duties. + +max_check_result_reaper_time=30 + + + + +# CHECK RESULT PATH +# This is directory where Icinga stores the results of host and +# service checks that have not yet been processed. +# +# Note: Make sure that only one instance of Icinga has access +# to this directory! + +check_result_path=/var/spool/checkresults + + + + +# MAX CHECK RESULT FILE AGE +# This option determines the maximum age (in seconds) which check +# result files are considered to be valid. Files older than this +# threshold will be mercilessly deleted without further processing. + +max_check_result_file_age=3600 + + + + +# CACHED HOST CHECK HORIZON +# This option determines the maximum amount of time (in seconds) +# that the state of a previous host check is considered current. +# Cached host states (from host checks that were performed more +# recently that the timeframe specified by this value) can immensely +# improve performance in regards to the host check logic. +# Too high of a value for this option may result in inaccurate host +# states being used by Icinga, while a lower value may result in a +# performance hit for host checks. Use a value of 0 to disable host +# check caching. + +cached_host_check_horizon=15 + + + +# CACHED SERVICE CHECK HORIZON +# This option determines the maximum amount of time (in seconds) +# that the state of a previous service check is considered current. +# Cached service states (from service checks that were performed more +# recently that the timeframe specified by this value) can immensely +# improve performance in regards to predictive dependency checks. +# Use a value of 0 to disable service check caching. + +cached_service_check_horizon=15 + + + +# ENABLE PREDICTIVE HOST DEPENDENCY CHECKS +# This option determines whether or not Icinga will attempt to execute +# checks of hosts when it predicts that future dependency logic test +# may be needed. These predictive checks can help ensure that your +# host dependency logic works well. +# Values: +# 0 = Disable predictive checks +# 1 = Enable predictive checks (default) + +enable_predictive_host_dependency_checks=1 + + + +# ENABLE PREDICTIVE SERVICE DEPENDENCY CHECKS +# This option determines whether or not Icinga will attempt to execute +# checks of service when it predicts that future dependency logic test +# may be needed. These predictive checks can help ensure that your +# service dependency logic works well. +# Values: +# 0 = Disable predictive checks +# 1 = Enable predictive checks (default) + +enable_predictive_service_dependency_checks=1 + + + +# SOFT STATE DEPENDENCIES +# This option determines whether or not Icinga will use soft state +# information when checking host and service dependencies. Normally +# Icinga will only use the latest hard host or service state when +# checking dependencies. If you want it to use the latest state (regardless +# of whether its a soft or hard state type), enable this option. +# Values: +# 0 = Don't use soft state dependencies (default) +# 1 = Use soft state dependencies + +soft_state_dependencies=0 + + + +# TIME CHANGE ADJUSTMENT THRESHOLDS +# These options determine when Icinga will react to detected changes +# in system time (either forward or backwards). + +#time_change_threshold=900 + + + +# AUTO-RESCHEDULING OPTION +# This option determines whether or not Icinga will attempt to +# automatically reschedule active host and service checks to +# "smooth" them out over time. This can help balance the load on +# the monitoring server. +# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE +# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY + +auto_reschedule_checks=0 + + + +# AUTO-RESCHEDULING INTERVAL +# This option determines how often (in seconds) Icinga will +# attempt to automatically reschedule checks. This option only +# has an effect if the auto_reschedule_checks option is enabled. +# Default is 30 seconds. +# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE +# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY + +auto_rescheduling_interval=30 + + + +# AUTO-RESCHEDULING WINDOW +# This option determines the "window" of time (in seconds) that +# Icinga will look at when automatically rescheduling checks. +# Only host and service checks that occur in the next X seconds +# (determined by this variable) will be rescheduled. This option +# only has an effect if the auto_reschedule_checks option is +# enabled. Default is 180 seconds (3 minutes). +# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE +# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY + +auto_rescheduling_window=180 + + + +# SLEEP TIME +# This is the number of seconds to sleep between checking for system +# events and service checks that need to be run. + +sleep_time=0.25 + + + +# TIMEOUT VALUES +# These options control how much time Icinga will allow various +# types of commands to execute before killing them off. Options +# are available for controlling maximum time allotted for +# service checks, host checks, event handlers, notifications, the +# ocsp command, and performance data commands. All values are in +# seconds. +# Increase the timeout values in case you are experiencing a lot +# of check timeouts. Addons like e.g. check_mk will perform +# one combined active servicecheck which could take longer than +# the default of 60sec. + +#service_check_timeout=120 +service_check_timeout=60 +host_check_timeout=30 +event_handler_timeout=30 +notification_timeout=30 +ocsp_timeout=5 +perfdata_timeout=5 + + + +# RETAIN STATE INFORMATION +# This setting determines whether or not Icinga will save state +# information for services and hosts before it shuts down. Upon +# startup Icinga will reload all saved service and host state +# information before starting to monitor. This is useful for +# maintaining long-term data on state statistics, etc, but will +# slow Icinga down a bit when it (re)starts. Since its only +# a one-time penalty, I think its well worth the additional +# startup delay. + +retain_state_information=1 + + + +# STATE RETENTION FILE +# This is the file that Icinga should use to store host and +# service state information before it shuts down. The state +# information in this file is also read immediately prior to +# starting to monitor the network when Icinga is restarted. +# This file is used only if the retain_state_information +# variable is set to 1. + +state_retention_file=/var/retention.dat + + + +# SYNC FILE +# This is an advanced facility to pass a subset of retention +# information into Icinga on a running system. This is similar +# to the state retention file with the following difference: +# +# - if the last_check value is less than the current last_check, +# then the state information is ignored (this must be specified +# immediately after the object identifiers) +# +# - downtimes and comments are not identified by an id number, but +# by other "similar characteristics". This is required to work in +# a distributed Nagios environment +# * downtimes: hostname, servicename (if appropriate), author, +# comment, start_time, end_time, fixed, duration +# * comments: hostname, servicename, author, comment +# +# If this variable is set, then on Icinga startup, the sync file +# will be read after the retention file has been processed. If the +# file is read successfully, it will be removed. +# If the file does not exist, no error will appear. +# There is also an API that will force a read of the sync file. + +#sync_retention_file=/var/sync.dat + + + +# RETENTION DATA UPDATE INTERVAL +# This setting determines how often (in minutes) that Icinga +# will automatically save retention data during normal operation. +# If you set this value to 0, Icinga will not save retention +# data at regular interval, but it will still save retention +# data before shutting down or restarting. If you have disabled +# state retention, this option has no effect. + +retention_update_interval=60 + + + +# USE RETAINED PROGRAM STATE +# This setting determines whether or not Icinga will set +# program status variables based on the values saved in the +# retention file. If you want to use retained program status +# information, set this value to 1. If not, set this value +# to 0. + +use_retained_program_state=1 + + +# DUMP RETAINED HOST SERVICE STATES TO NEB +# This setting determines wether or not Icinga will dump host +# and service states based on the values saved in the retention +# file to the neb modules. If you don't want that, use at your +# own risk and disable it + +dump_retained_host_service_states_to_neb=1 + + + +# USE RETAINED SCHEDULING INFO +# This setting determines whether or not Icinga will retain +# the scheduling info (next check time) for hosts and services +# based on the values saved in the retention file. If you +# If you want to use retained scheduling info, set this +# value to 1. If not, set this value to 0. + +use_retained_scheduling_info=1 + + + +# RETAINED ATTRIBUTE MASKS (ADVANCED FEATURE) +# The following variables are used to specify specific host and +# service attributes that should *not* be retained by Icinga during +# program restarts. +# +# The values of the masks are bitwise ANDs of values specified +# by the "MODATTR_" definitions found in include/common.h. +# For example, if you do not want the current enabled/disabled state +# of flap detection and event handlers for hosts to be retained, you +# would use a value of 24 for the host attribute mask... +# MODATTR_EVENT_HANDLER_ENABLED (8) + MODATTR_FLAP_DETECTION_ENABLED (16) = 24 + +# This mask determines what host attributes are not retained +retained_host_attribute_mask=0 + +# This mask determines what service attributes are not retained +retained_service_attribute_mask=0 + +# These two masks determine what process attributes are not retained. +# There are two masks, because some process attributes have host and service +# options. For example, you can disable active host checks, but leave active +# service checks enabled. +retained_process_host_attribute_mask=0 +retained_process_service_attribute_mask=0 + +# These two masks determine what contact attributes are not retained. +# There are two masks, because some contact attributes have host and +# service options. For example, you can disable host notifications for +# a contact, but leave service notifications enabled for them. +retained_contact_host_attribute_mask=0 +retained_contact_service_attribute_mask=0 + + + +# INTERVAL LENGTH +# This is the seconds per unit interval as used in the +# host/contact/service configuration files. Setting this to 60 means +# that each interval is one minute long (60 seconds). Other settings +# have not been tested much, so your mileage is likely to vary... + +interval_length=60 + + + +# AGGRESSIVE HOST CHECKING OPTION +# If you don't want to turn on aggressive host checking features, set +# this value to 0 (the default). Otherwise set this value to 1 to +# enable the aggressive check option. Read the docs for more info +# on what aggressive host check is or check out the source code in +# base/checks.c + +use_aggressive_host_checking=0 + + + +# SERVICE CHECK EXECUTION OPTION +# This determines whether or not Icinga will actively execute +# service checks when it initially starts. If this option is +# disabled, checks are not actively made, but Icinga can still +# receive and process passive check results that come in. Unless +# you're implementing redundant hosts or have a special need for +# disabling the execution of service checks, leave this enabled! +# Values: 1 = enable checks, 0 = disable checks + +execute_service_checks=1 + + + +# PASSIVE SERVICE CHECK ACCEPTANCE OPTION +# This determines whether or not Icinga will accept passive +# service checks results when it initially (re)starts. +# Values: 1 = accept passive checks, 0 = reject passive checks + +accept_passive_service_checks=1 + + + +# HOST CHECK EXECUTION OPTION +# This determines whether or not Icinga will actively execute +# host checks when it initially starts. If this option is +# disabled, checks are not actively made, but Icinga can still +# receive and process passive check results that come in. Unless +# you're implementing redundant hosts or have a special need for +# disabling the execution of host checks, leave this enabled! +# Values: 1 = enable checks, 0 = disable checks + +execute_host_checks=1 + + + +# PASSIVE HOST CHECK ACCEPTANCE OPTION +# This determines whether or not Icinga will accept passive +# host checks results when it initially (re)starts. +# Values: 1 = accept passive checks, 0 = reject passive checks + +accept_passive_host_checks=1 + + + +# NOTIFICATIONS OPTION +# This determines whether or not Icinga will sent out any host or +# service notifications when it is initially (re)started. +# Values: 1 = enable notifications, 0 = disable notifications + +enable_notifications=1 + + + +# EVENT HANDLER USE OPTION +# This determines whether or not Icinga will run any host or +# service event handlers when it is initially (re)started. Unless +# you're implementing redundant hosts, leave this option enabled. +# Values: 1 = enable event handlers, 0 = disable event handlers + +enable_event_handlers=1 + + + +# PROCESS PERFORMANCE DATA OPTION +# This determines whether or not Icinga will process performance +# data returned from service and host checks. If this option is +# enabled, host performance data will be processed using the +# host_perfdata_command (defined below) and service performance +# data will be processed using the service_perfdata_command (also +# defined below). Read the HTML docs for more information on +# performance data. +# Values: 1 = process performance data, 0 = do not process performance data + +process_performance_data=0 + + + +# HOST AND SERVICE PERFORMANCE DATA PROCESSING COMMANDS +# These commands are run after every host and service check is +# performed. These commands are executed only if the +# process_performance_data option (above) is set to 1. The command +# argument is the short name of a command definition that you +# define in your host configuration file. Read the HTML docs for +# more information on performance data. + +#host_perfdata_command=process-host-perfdata +#service_perfdata_command=process-service-perfdata + + + +# HOST AND SERVICE PERFORMANCE DATA FILES +# These files are used to store host and service performance data. +# Performance data is only written to these files if the +# process_performance_data option (above) is set to 1. + +#host_perfdata_file=/tmp/host-perfdata +#service_perfdata_file=/tmp/service-perfdata + + + +# HOST AND SERVICE PERFORMANCE DATA FILE TEMPLATES +# These options determine what data is written (and how) to the +# performance data files. The templates may contain macros, special +# characters (\t for tab, \r for carriage return, \n for newline) +# and plain text. A newline is automatically added after each write +# to the performance data file. Some examples of what you can do are +# shown below. + +#host_perfdata_file_template=[HOSTPERFDATA]\t$TIMET$\t$HOSTNAME$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$ +#service_perfdata_file_template=[SERVICEPERFDATA]\t$TIMET$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$ + + + +# HOST AND SERVICE PERFORMANCE DATA FILE MODES +# This option determines whether or not the host and service +# performance data files are opened in write ("w") or append ("a") +# mode. If you want to use named pipes, you should use the special +# pipe ("p") mode which avoid blocking at startup, otherwise you will +# likely want the defult append ("a") mode. + +#host_perfdata_file_mode=a +#service_perfdata_file_mode=a + + + +# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING INTERVAL +# These options determine how often (in seconds) the host and service +# performance data files are processed using the commands defined +# below. A value of 0 indicates the files should not be periodically +# processed. + +#host_perfdata_file_processing_interval=0 +#service_perfdata_file_processing_interval=0 + + + +# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING COMMANDS +# These commands are used to periodically process the host and +# service performance data files. The interval at which the +# processing occurs is determined by the options above. + +#host_perfdata_file_processing_command=process-host-perfdata-file +#service_perfdata_file_processing_command=process-service-perfdata-file + + +# HOST AND SERVICE PERFORMANCE DATA PROCESS EMPTY RESULTS +# THese options determine wether the core will process empty perfdata +# results or not. This is needed for distributed monitoring, and intentionally +# turned on by default. +# If you don't require empty perfdata - saving some cpu cycles +# on unwanted macro calculation - you can turn that off. Be careful! +# Values: 1 = enable, 0 = disable + +#host_perfdata_process_empty_results=1 +#service_perfdata_process_empty_results=1 + + + +# ALLOW EMPTY HOSTGROUP ASSIGMENT FOR SERVICES +# This boolean option determines whether services assigned to empty +# host groups (host groups with no host members) will cause Icinga to +# exit with error on start up (or during a configuration check) or not. +# The default behavior if the option is not present in the main +# configuration file is for Icinga to exit with error if services are +# associated with host groups that have no hosts associated with them. + +#allow_empty_hostgroup_assignment=0 + + + +# OBSESS OVER SERVICE CHECKS OPTION +# This determines whether or not Icinga will obsess over service +# checks and run the ocsp_command defined below. Unless you're +# planning on implementing distributed monitoring, do not enable +# this option. Read the HTML docs for more information on +# implementing distributed monitoring. +# Values: 1 = obsess over services, 0 = do not obsess (default) + +obsess_over_services=0 + + + +# OBSESSIVE COMPULSIVE SERVICE PROCESSOR COMMAND +# This is the command that is run for every service check that is +# processed by Icinga. This command is executed only if the +# obsess_over_services option (above) is set to 1. The command +# argument is the short name of a command definition that you +# define in your host configuration file. Read the HTML docs for +# more information on implementing distributed monitoring. + +#ocsp_command=somecommand + + + +# OBSESS OVER HOST CHECKS OPTION +# This determines whether or not Icinga will obsess over host +# checks and run the ochp_command defined below. Unless you're +# planning on implementing distributed monitoring, do not enable +# this option. Read the HTML docs for more information on +# implementing distributed monitoring. +# Values: 1 = obsess over hosts, 0 = do not obsess (default) + +obsess_over_hosts=0 + + + +# OBSESSIVE COMPULSIVE HOST PROCESSOR COMMAND +# This is the command that is run for every host check that is +# processed by Icinga. This command is executed only if the +# obsess_over_hosts option (above) is set to 1. The command +# argument is the short name of a command definition that you +# define in your host configuration file. Read the HTML docs for +# more information on implementing distributed monitoring. + +#ochp_command=somecommand + + + +# TRANSLATE PASSIVE HOST CHECKS OPTION +# This determines whether or not Icinga will translate +# DOWN/UNREACHABLE passive host check results into their proper +# state for this instance of Icinga. This option is useful +# if you have distributed or failover monitoring setup. In +# these cases your other Icinga servers probably have a different +# "view" of the network, with regards to the parent/child relationship +# of hosts. If a distributed monitoring server thinks a host +# is DOWN, it may actually be UNREACHABLE from the point of +# this Icinga instance. Enabling this option will tell Icinga +# to translate any DOWN or UNREACHABLE host states it receives +# passively into the correct state from the view of this server. +# Values: 1 = perform translation, 0 = do not translate (default) + +translate_passive_host_checks=0 + + + +# PASSIVE HOST CHECKS ARE SOFT OPTION +# This determines whether or not Icinga will treat passive host +# checks as being HARD or SOFT. By default, a passive host check +# result will put a host into a HARD state type. This can be changed +# by enabling this option. +# Values: 0 = passive checks are HARD, 1 = passive checks are SOFT + +passive_host_checks_are_soft=0 + + + +# ORPHANED HOST/SERVICE CHECK OPTIONS +# These options determine whether or not Icinga will periodically +# check for orphaned host service checks. Since service checks are +# not rescheduled until the results of their previous execution +# instance are processed, there exists a possibility that some +# checks may never get rescheduled. A similar situation exists for +# host checks, although the exact scheduling details differ a bit +# from service checks. Orphaned checks seem to be a rare +# problem and should not happen under normal circumstances. +# If you have problems with service checks never getting +# rescheduled, make sure you have orphaned service checks enabled. +# Values: 1 = enable checks, 0 = disable checks + +check_for_orphaned_services=1 +check_for_orphaned_hosts=1 + + + +# SERVICE CHECK TIMEOUT STATE +# This setting determines the state Icinga will report when a +# service check times out meaning it does not respond within +# service_check_timeout seconds. The default is set to Unknown +# and not Critical. +# Valid settings are: +# c - Critical +# u - Unknown (default) +# w - Warning +# o - OK + +service_check_timeout_state=u + + + +# SERVICE FRESHNESS CHECK OPTION +# This option determines whether or not Icinga will periodically +# check the "freshness" of service results. Enabling this option +# is useful for ensuring passive checks are received in a timely +# manner. +# Values: 1 = enabled freshness checking, 0 = disable freshness checking + +check_service_freshness=1 + + + +# SERVICE FRESHNESS CHECK INTERVAL +# This setting determines how often (in seconds) Icinga will +# check the "freshness" of service check results. If you have +# disabled service freshness checking, this option has no effect. + +service_freshness_check_interval=60 + + + +# HOST FRESHNESS CHECK OPTION +# This option determines whether or not Icinga will periodically +# check the "freshness" of host results. Enabling this option +# is useful for ensuring passive checks are received in a timely +# manner. +# Values: 1 = enabled freshness checking, 0 = disable freshness checking + +check_host_freshness=0 + + + +# HOST FRESHNESS CHECK INTERVAL +# This setting determines how often (in seconds) Icinga will +# check the "freshness" of host check results. If you have +# disabled host freshness checking, this option has no effect. + +host_freshness_check_interval=60 + + + + +# ADDITIONAL FRESHNESS THRESHOLD LATENCY +# This setting determines the number of seconds that Icinga +# will add to any host and service freshness thresholds that +# it calculates (those not explicitly specified by the user). + +additional_freshness_latency=15 + + + + +# FLAP DETECTION OPTION +# This option determines whether or not Icinga will try +# and detect hosts and services that are "flapping". +# Flapping occurs when a host or service changes between +# states too frequently. When Icinga detects that a +# host or service is flapping, it will temporarily suppress +# notifications for that host/service until it stops +# flapping. Flap detection is very experimental, so read +# the HTML documentation before enabling this feature! +# Values: 1 = enable flap detection +# 0 = disable flap detection (default) + +enable_flap_detection=1 + + + +# FLAP DETECTION THRESHOLDS FOR HOSTS AND SERVICES +# Read the HTML documentation on flap detection for +# an explanation of what this option does. This option +# has no effect if flap detection is disabled. + +low_service_flap_threshold=5.0 +high_service_flap_threshold=20.0 +low_host_flap_threshold=5.0 +high_host_flap_threshold=20.0 + + + +# DATE FORMAT OPTION +# This option determines how short dates are displayed. Valid options +# include: +# us (MM-DD-YYYY HH:MM:SS) +# euro (DD-MM-YYYY HH:MM:SS) +# iso8601 (YYYY-MM-DD HH:MM:SS) +# strict-iso8601 (YYYY-MM-DDTHH:MM:SS) +# + +date_format=us + + + + +# TIMEZONE OFFSET +# This option is used to override the default timezone that this +# instance of Icinga runs in. If not specified, Icinga will use +# the system configured timezone. +# +# NOTE: In order to display the correct timezone in the CGIs, you +# will also need to alter the Apache directives for the CGI path +# to include your timezone. Example: +# +# <Directory "/usr/local/icinga/sbin/"> +# SetEnv TZ "Australia/Brisbane" +# ... +# </Directory> + +#use_timezone=US/Mountain +#use_timezone=Australia/Brisbane + + + + +# P1.PL FILE LOCATION +# This value determines where the p1.pl perl script (used by the +# embedded Perl interpreter) is located. If you didn't compile +# Icinga with embedded Perl support, this option has no effect. + +p1_file=/usr/lib/p1.pl + + + +# EMBEDDED PERL INTERPRETER OPTION +# This option determines whether or not the embedded Perl interpreter +# will be enabled during runtime. This option has no effect if Icinga +# has not been compiled with support for embedded Perl. +# This option is intentionally disabled by default, because embedded +# perl can cause memory leaks and make Icinga unstable if not properly +# used. +# Only enable this setting when you really know what you are doing! +# Values: 0 = disable interpreter, 1 = enable interpreter + +enable_embedded_perl=0 + + + +# EMBEDDED PERL USAGE OPTION +# This option determines whether or not Icinga will process Perl plugins +# and scripts with the embedded Perl interpreter if the plugins/scripts +# do not explicitly indicate whether or not it is okay to do so. Read +# the HTML documentation on the embedded Perl interpreter for more +# information on how this option works. + +use_embedded_perl_implicitly=1 + + + +# EVENT HANDLERS FOR STALKED HOSTS/SERVICES +# Allow running event handlers for stalked hosts/services in order +# to forward to external systems. +# Values: 0 = disabled (default), 1 = enabled + +stalking_event_handlers_for_hosts=0 +stalking_event_handlers_for_services=0 + + + +# NOTIFICATIONS FOR STALKED HOSTS/SERVICES +# Allow notifications for stalked hosts/services globally +# for all contacts in order to notify about a stalking +# alert. +# Values: 0 = disabled (default), 1 = enabled + +stalking_notifications_for_hosts=0 +stalking_notifications_for_services=0 + + + +# ILLEGAL OBJECT NAME CHARACTERS +# This option allows you to specify illegal characters that cannot +# be used in host names, service descriptions, or names of other +# object types. + +illegal_object_name_chars=`~!$%^&*|'"<>?,()= + + + +# ILLEGAL MACRO OUTPUT CHARACTERS +# This option allows you to specify illegal characters that are +# stripped from macros before being used in notifications, event +# handlers, etc. This DOES NOT affect macros used in service or +# host check commands. +# The following macros are stripped of the characters you specify: +# $HOSTOUTPUT$ +# $HOSTPERFDATA$ +# $HOSTACKAUTHOR$ +# $HOSTACKCOMMENT$ +# $SERVICEOUTPUT$ +# $SERVICEPERFDATA$ +# $SERVICEACKAUTHOR$ +# $SERVICEACKCOMMENT$ + +illegal_macro_output_chars=`~$&|'"<> + + + +# REGULAR EXPRESSION MATCHING +# This option controls whether or not regular expression matching +# takes place in the object config files. Regular expression +# matching is used to match host, hostgroup, service, and service +# group names/descriptions in some fields of various object types. +# Values: 1 = enable regexp matching, 0 = disable regexp matching + +use_regexp_matching=0 + + + +# "TRUE" REGULAR EXPRESSION MATCHING +# This option controls whether or not "true" regular expression +# matching takes place in the object config files. This option +# only has an effect if regular expression matching is enabled +# (see above). If this option is DISABLED, regular expression +# matching only occurs if a string contains wildcard characters +# (* and ?). If the option is ENABLED, regexp matching occurs +# all the time (which can be annoying). +# Values: 1 = enable true matching, 0 = disable true matching + +use_true_regexp_matching=0 + + + +# ADMINISTRATOR EMAIL/PAGER ADDRESSES +# The email and pager address of a global administrator (likely you). +# Icinga never uses these values itself, but you can access them by +# using the $ADMINEMAIL$ and $ADMINPAGER$ macros in your notification +# commands. + +admin_email=icinga@localhost +admin_pager=pageicinga@localhost + + + +# DAEMON CORE DUMP OPTION +# This option determines whether or not Icinga is allowed to create +# a core dump when it runs as a daemon. Note that it is generally +# considered bad form to allow this, but it may be useful for +# debugging purposes. Enabling this option doesn't guarantee that +# a core file will be produced, but that's just life... +# Values: 1 - Allow core dumps +# 0 - Do not allow core dumps (default) + +daemon_dumps_core=0 + + + +# LARGE INSTALLATION TWEAKS OPTION +# This option determines whether or not Icinga will take some shortcuts +# which can save on memory and CPU usage in large Icinga installations. +# Read the documentation for more information on the benefits/tradeoffs +# of enabling this option. +# Values: 1 - Enabled tweaks +# 0 - Disable tweaks (default) + +use_large_installation_tweaks=0 + + + +# ENABLE ENVIRONMENT MACROS +# This option determines whether or not Icinga will make all standard +# macros available as environment variables when host/service checks +# and system commands (event handlers, notifications, etc.) are +# executed. Enabling this option can cause performance issues in +# large installations, as it will consume a bit more memory and (more +# importantly) consume more CPU. +# Keep in mind that various addons/plugins will require this setting +# to be enabled (e.g. check_oracle_health) for special usage. +# Values: 1 - Enable environment variable macros +# 0 - Disable environment variable macros (default) + +enable_environment_macros=0 + + + +# CHILD PROCESS MEMORY OPTION +# This option determines whether or not Icinga will free memory in +# child processes (processed used to execute system commands and host/ +# service checks). If you specify a value here, it will override +# program defaults. +# Value: 1 - Free memory in child processes +# 0 - Do not free memory in child processes + +#free_child_process_memory=1 + + + +# CHILD PROCESS FORKING BEHAVIOR +# This option determines how Icinga will fork child processes +# (used to execute system commands and host/service checks). Normally +# child processes are fork()ed twice, which provides a very high level +# of isolation from problems. Fork()ing once is probably enough and will +# save a great deal on CPU usage (in large installs), so you might +# want to consider using this. If you specify a value here, it will +# program defaults. +# Value: 1 - Child processes fork() twice +# 0 - Child processes fork() just once + +#child_processes_fork_twice=1 + + + +# DEBUG LEVEL +# This option determines how much (if any) debugging information will +# be written to the debug file. OR values together to log multiple +# types of information. +# Values: +# -1 = Everything +# 0 = Nothing +# 1 = Functions +# 2 = Configuration +# 4 = Process information +# 8 = Scheduled events +# 16 = Host/service checks +# 32 = Notifications +# 64 = Event broker +# 128 = External commands +# 256 = Commands +# 512 = Scheduled downtime +# 1024 = Comments +# 2048 = Macros + +debug_level=0 + + + +# DEBUG VERBOSITY +# This option determines how verbose the debug log out will be. +# Values: 0 = Brief output +# 1 = More detailed +# 2 = Very detailed + +debug_verbosity=1 + + + +# DEBUG FILE +# This option determines where Icinga should write debugging information. + +debug_file=/var/icinga.debug + + + +# MAX DEBUG FILE SIZE +# This option determines the maximum size (in bytes) of the debug file. If +# the file grows larger than this size, it will be renamed with a .old +# extension. If a file already exists with a .old extension it will +# automatically be deleted. This helps ensure your disk space usage doesn't +# get out of control when debugging Icinga. + +# 100M +max_debug_file_size=100000000 + + + +# EVENT PROFILING +# This option enables or disables event profiling for stats of event counts +# and time taken for events. Option can't be used on Solaris with gcc3. +# Values: 0 - disabled +# 1 - enabled + +event_profiling_enabled=0 diff --git a/package/icinga/src/etc/icinga/mrtg.cfg b/package/icinga/src/etc/icinga/mrtg.cfg new file mode 100644 index 000000000..bcec12731 --- /dev/null +++ b/package/icinga/src/etc/icinga/mrtg.cfg @@ -0,0 +1,180 @@ +################################################################### +# MRTG Graphs: Icinga Statistics +# +# You can add the following entries to your MRTG config file to +# begin graphing several Icinga statistics which can be useful for +# debugging and trending purposes. The icingastats binary (which is +# included as part of the Icinga distribution) is used to generate +# the data. +################################################################### + +# Service Latency and Execution Time +Target[icinga-a]: `/usr/bin/icingastats --mrtg --data=AVGACTSVCLAT,AVGACTSVCEXT,PROGRUNTIME,ICINGAVERPID` +MaxBytes[icinga-a]: 100000 +Title[icinga-a]: Average Service Check Latency and Execution Time +PageTop[icinga-a]: <H1>Average Service Check Latency and Execution Time</H1> +Options[icinga-a]: growright,gauge,nopercent +YLegend[icinga-a]: Milliseconds +ShortLegend[icinga-a]: +LegendI[icinga-a]: Latency: +LegendO[icinga-a]: Execution Time: +Legend1[icinga-a]: Latency +Legend2[icinga-a]: Execution Time +Legend3[icinga-a]: Maximal 5 Minute Latency +Legend4[icinga-a]: Maximal 5 Minute Execution Time + + +# Service Percent State Change +Target[icinga-b]: `/usr/bin/icingastats --mrtg --data=AVGACTSVCPSC,AVGPSVSVCPSC,PROGRUNTIME,ICINGAVERPID` +MaxBytes[icinga-b]: 100 +Title[icinga-b]: Average Service State Change +PageTop[icinga-b]: <H1>Average Service State Change</H1> +Options[icinga-b]: growright,gauge,nopercent +YLegend[icinga-b]: Percent +ShortLegend[icinga-b]: +LegendI[icinga-b]: Active Check % Change: +LegendO[icinga-b]: Passive Check % Change: +Legend1[icinga-b]: State Change +Legend2[icinga-b]: State Change +Legend3[icinga-b]: Maximal 5 Minute State Change +Legend4[icinga-b]: Maximal 5 Minute State Change + + +# Host Latency and Execution Time +Target[icinga-c]: `/usr/bin/icingastats --mrtg --data=AVGACTHSTLAT,AVGACTHSTEXT,PROGRUNTIME,ICINGAVERPID` +MaxBytes[icinga-c]: 100000 +Title[icinga-c]: Average Host Check Latency and Execution Time +PageTop[icinga-c]: <H1>Average Host Check Latency and Execution Time</H1> +Options[icinga-c]: growright,gauge,nopercent +YLegend[icinga-c]: Milliseconds +ShortLegend[icinga-c]: +LegendI[icinga-c]: Latency: +LegendO[icinga-c]: Execution Time: +Legend1[icinga-c]: Latency +Legend2[icinga-c]: Execution Time +Legend3[icinga-c]: Maximal 5 Minute Latency +Legend4[icinga-c]: Maximal 5 Minute Execution Time + + +# Host Percent State Change +Target[icinga-d]: `/usr/bin/icingastats --mrtg --data=AVGACTHSTPSC,AVGPSVHSTPSC,PROGRUNTIME,ICINGAVERPID` +MaxBytes[icinga-d]: 100 +Title[icinga-d]: Average Host State Change +PageTop[icinga-d]: <H1>Average Host State Change</H1> +Options[icinga-d]: growright,gauge,nopercent +YLegend[icinga-d]: Percent +ShortLegend[icinga-d]: +LegendI[icinga-d]: Active Check % Change: +LegendO[icinga-d]: Passive Check % Change: +Legend1[icinga-d]: State Change +Legend2[icinga-d]: State Change +Legend3[icinga-d]: Maximal 5 Minute State Change +Legend4[icinga-d]: Maximal 5 Minute State Change + + +# Hosts/Services Actively Checked +Target[icinga-e]: `/usr/bin/icingastats --mrtg --data=NUMHSTACTCHK5M,NUMSVCACTCHK5M,PROGRUNTIME,ICINGAVERPID` +MaxBytes[icinga-e]: 7000 +Title[icinga-e]: Hosts/Services Actively Checked +PageTop[icinga-e]: <H1>Hosts/Services Actively Checked</H1> +Options[icinga-e]: growright,gauge,nopercent +YLegend[icinga-e]: Total +ShortLegend[icinga-e]: +LegendI[icinga-e]: Hosts: +LegendO[icinga-e]: Services: + + +# Hosts/Services Passively Checked +Target[icinga-f]: `/usr/bin/icingastats --mrtg --data=NUMHSTPSVCHK5M,NUMSVCPSVCHK5M,PROGRUNTIME,ICINGAVERPID` +MaxBytes[icinga-f]: 7000 +Title[icinga-f]: Hosts/Services Passively Checked +PageTop[icinga-f]: <H1>Hosts/Services Passively Checked</H1> +Options[icinga-f]: growright,gauge,nopercent +YLegend[icinga-f]: Total +ShortLegend[icinga-f]: +LegendI[icinga-f]: Hosts: +LegendO[icinga-f]: Services: + + +# Used/Avail External Command Buffers +Target[icinga-g]: `/usr/bin/icingastats --mrtg --data=TOTCMDBUF,USEDCMDBUF,PROGRUNTIME,ICINGAVERPID` +MaxBytes[icinga-g]: 7000 +Title[icinga-g]: External Command Buffers +PageTop[icinga-g]: <H1>External Command Buffers</H1> +Options[icinga-g]: growright,gauge,nopercent +YLegend[icinga-g]: Buffers +ShortLegend[icinga-g]: +LegendI[icinga-g]: Total: +LegendO[icinga-g]: Used: + + +# Active Host Checks +Target[icinga-i]: `/usr/bin/icingastats --mrtg --data=NUMSACTHSTCHECKS5M,NUMOACTHSTCHECKS5M,PROGRUNTIME,ICINGAVERPID` +MaxBytes[icinga-i]: 7000 +Title[icinga-i]: Active Host Checks +PageTop[icinga-i]: <H1>Active Host Checks</H1> +Options[icinga-i]: growright,gauge,nopercent +YLegend[icinga-i]: Checks +ShortLegend[icinga-i]: +LegendI[icinga-i]: Scheduled Checks: +LegendO[icinga-i]: On-Demand Checks: + + +# Active Service Checks +Target[icinga-j]: `/usr/bin/icingastats --mrtg --data=NUMSACTSVCCHECKS5M,NUMOACTSVCCHECKS5M,PROGRUNTIME,ICINGAVERPID` +MaxBytes[icinga-j]: 7000 +Title[icinga-j]: Active Service Checks +PageTop[icinga-j]: <H1>Active Service Checks</H1> +Options[icinga-j]: growright,gauge,nopercent +YLegend[icinga-j]: Checks +ShortLegend[icinga-j]: +LegendI[icinga-j]: Scheduled Checks: +LegendO[icinga-j]: On-Demand Checks: + + +# Passive Host/Service Checks +Target[icinga-k]: `/usr/bin/icingastats --mrtg --data=NUMPSVHSTCHECKS5M,NUMPSVSVCCHECKS5M,PROGRUNTIME,ICINGAVERPID` +MaxBytes[icinga-k]: 7000 +Title[icinga-k]: Passive Host/Service Checks +PageTop[icinga-k]: <H1>Passive Host/Service Checks</H1> +Options[icinga-k]: growright,gauge,nopercent +YLegend[icinga-k]: Checks +ShortLegend[icinga-k]: +LegendI[icinga-k]: Host Checks: +LegendO[icinga-k]: Service Checks: + + +# Cached Host/Service Checks +Target[icinga-l]: `/usr/bin/icingastats --mrtg --data=NUMCACHEDHSTCHECKS5M,NUMCACHEDSVCCHECKS5M,PROGRUNTIME,ICINGAVERPID` +MaxBytes[icinga-l]: 7000 +Title[icinga-l]: Cached Host/Service Checks +PageTop[icinga-l]: <H1>Cached Host/Service Checks</H1> +Options[icinga-l]: growright,gauge,nopercent +YLegend[icinga-l]: Checks +ShortLegend[icinga-l]: +LegendI[icinga-l]: Host Checks: +LegendO[icinga-l]: Service Checks: + + +# External Commands +Target[icinga-m]: `/usr/bin/icingastats --mrtg --data=NUMEXTCMDS5M,0,PROGRUNTIME,ICINGAVERPID` +MaxBytes[icinga-m]: 7000 +Title[icinga-m]: External Commands +PageTop[icinga-m]: <H1>External Commands</H1> +Options[icinga-m]: growright,gauge,nopercent +YLegend[icinga-m]: Commands +ShortLegend[icinga-m]: +LegendI[icinga-m]: Commands: +LegendO[icinga-m]: + + +# Parallel/Service Host Checks +Target[icinga-n]: `/usr/bin/icingastats --mrtg --data=NUMPARHSTCHECKS5M,NUMSERHSTCHECKS5M,PROGRUNTIME,ICINGAVERPID` +MaxBytes[icinga-n]: 7000 +Title[icinga-n]: Parallel/Serial Host Checks +PageTop[icinga-n]: <H1>Parallel/Serial Host Checks</H1> +Options[icinga-n]: growright,gauge,nopercent +YLegend[icinga-n]: Checks +ShortLegend[icinga-n]: +LegendI[icinga-n]: Parallel Checks: +LegendO[icinga-n]: Serial Checks: diff --git a/package/icinga/src/etc/icinga/objects/commands.cfg b/package/icinga/src/etc/icinga/objects/commands.cfg new file mode 100644 index 000000000..7e57f3b7c --- /dev/null +++ b/package/icinga/src/etc/icinga/objects/commands.cfg @@ -0,0 +1,250 @@ +############################################################################### +# COMMANDS.CFG - SAMPLE COMMAND DEFINITIONS FOR ICINGA +# +# NOTES: This config file provides you with some example command definitions +# that you can reference in host, service, and contact definitions. +# +# You don't need to keep commands in a separate file from your other +# object definitions. This has been done just to make things easier to +# understand. +# +############################################################################### + + +################################################################################ +# +# SAMPLE NOTIFICATION COMMANDS +# +# These are some example notification commands. They may or may not work on +# your system without modification. As an example, some systems will require +# you to use "/usr/bin/mailx" instead of "/usr/bin/mail" in the commands below. +# +################################################################################ + + +# 'notify-host-by-email' command definition +define command{ + command_name notify-host-by-email + command_line /usr/bin/printf "%b" "***** Icinga *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is $HOSTSTATE$ **" $CONTACTEMAIL$ + } + +# 'notify-service-by-email' command definition +define command{ + command_name notify-service-by-email + command_line /usr/bin/printf "%b" "***** Icinga *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" $CONTACTEMAIL$ + } + + + + + +################################################################################ +# +# SAMPLE HOST CHECK COMMANDS +# +################################################################################ + + +# This command checks to see if a host is "alive" by pinging it +# The check must result in a 100% packet loss or 5 second (5000ms) round trip +# average time to produce a critical error. +# Note: Five ICMP echo packets are sent (determined by the '-p 5' argument) + +# 'check-host-alive' command definition +define command{ + command_name check-host-alive + command_line $USER1$/check_ping -H $HOSTADDRESS$ -w 3000.0,80% -c 5000.0,100% -p 5 + } + + + + +################################################################################ +# +# SAMPLE SERVICE CHECK COMMANDS +# +# These are some example service check commands. They may or may not work on +# your system, as they must be modified for your plugins. See the HTML +# documentation on the plugins for examples of how to configure command definitions. +# +# NOTE: The following 'check_local_...' functions are designed to monitor +# various metrics on the host that Icinga is running on (i.e. this one). +################################################################################ + +# 'check_local_disk' command definition +define command{ + command_name check_local_disk + command_line $USER1$/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$ + } + + +# 'check_local_load' command definition +define command{ + command_name check_local_load + command_line $USER1$/check_load -w $ARG1$ -c $ARG2$ + } + + +# 'check_local_procs' command definition +define command{ + command_name check_local_procs + command_line $USER1$/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$ + } + + +# 'check_local_users' command definition +define command{ + command_name check_local_users + command_line $USER1$/check_users -w $ARG1$ -c $ARG2$ + } + + +# 'check_local_swap' command definition +define command{ + command_name check_local_swap + command_line $USER1$/check_swap -w $ARG1$ -c $ARG2$ + } + + +# 'check_local_mrtgtraf' command definition +define command{ + command_name check_local_mrtgtraf + command_line $USER1$/check_mrtgtraf -F $ARG1$ -a $ARG2$ -w $ARG3$ -c $ARG4$ -e $ARG5$ + } + + +################################################################################ +# NOTE: The following 'check_...' commands are used to monitor services on +# both local and remote hosts. +################################################################################ + +# 'check_ftp' command definition +define command{ + command_name check_ftp + command_line $USER1$/check_ftp -H $HOSTADDRESS$ $ARG1$ + } + + +# 'check_hpjd' command definition +define command{ + command_name check_hpjd + command_line $USER1$/check_hpjd -H $HOSTADDRESS$ $ARG1$ + } + + +# 'check_snmp' command definition +define command{ + command_name check_snmp + command_line $USER1$/check_snmp -H $HOSTADDRESS$ $ARG1$ + } + + +# 'check_http' command definition +define command{ + command_name check_http + command_line $USER1$/check_http -I $HOSTADDRESS$ $ARG1$ + } + + +# 'check_ssh' command definition +define command{ + command_name check_ssh + command_line $USER1$/check_ssh $ARG1$ $HOSTADDRESS$ + } + + +# 'check_dhcp' command definition +define command{ + command_name check_dhcp + command_line $USER1$/check_dhcp $ARG1$ + } + + +# 'check_ping' command definition +define command{ + command_name check_ping + command_line $USER1$/check_ping -H $HOSTADDRESS$ -w $ARG1$ -c $ARG2$ -p 5 + } + + +# 'check_pop' command definition +define command{ + command_name check_pop + command_line $USER1$/check_pop -H $HOSTADDRESS$ $ARG1$ + } + + +# 'check_imap' command definition +define command{ + command_name check_imap + command_line $USER1$/check_imap -H $HOSTADDRESS$ $ARG1$ + } + + +# 'check_smtp' command definition +define command{ + command_name check_smtp + command_line $USER1$/check_smtp -H $HOSTADDRESS$ $ARG1$ + } + + +# 'check_tcp' command definition +define command{ + command_name check_tcp + command_line $USER1$/check_tcp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$ + } + + +# 'check_udp' command definition +define command{ + command_name check_udp + command_line $USER1$/check_udp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$ + } + + +# 'check_nt' command definition +define command{ + command_name check_nt + command_line $USER1$/check_nt -H $HOSTADDRESS$ -p 12489 -v $ARG1$ $ARG2$ + } + + +# 'check_dummy' command definition +define command{ + command_name check_dummy + command_line $USER1$/check_dummy $ARG1$ + } + +# 'check_icinga_startup_delay' command definition +define command { + command_name check_icinga_startup_delay + command_line $USER1$/check_dummy 0 "Icinga started with $$(($EVENTSTARTTIME$-$PROCESSSTARTTIME$)) seconds delay | delay=$$(($EVENTSTARTTIME$-$PROCESSSTARTTIME$))" +} + + +################################################################################ +# +# SAMPLE PERFORMANCE DATA COMMANDS +# +# These are sample performance data commands that can be used to send performance +# data output to two text files (one for hosts, another for services). If you +# plan on simply writing performance data out to a file, consider using the +# host_perfdata_file and service_perfdata_file options in the main config file. +# +################################################################################ + + +# 'process-host-perfdata' command definition +define command{ + command_name process-host-perfdata + command_line /usr/bin/printf "%b" "$LASTHOSTCHECK$\t$HOSTNAME$\t$HOSTSTATE$\t$HOSTATTEMPT$\t$HOSTSTATETYPE$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$\n" >> /var/host-perfdata.out + } + + +# 'process-service-perfdata' command definition +define command{ + command_name process-service-perfdata + command_line /usr/bin/printf "%b" "$LASTSERVICECHECK$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICESTATE$\t$SERVICEATTEMPT$\t$SERVICESTATETYPE$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$\n" >> /var/service-perfdata.out + } + + diff --git a/package/icinga/src/etc/icinga/objects/contacts.cfg b/package/icinga/src/etc/icinga/objects/contacts.cfg new file mode 100644 index 000000000..4fda02f83 --- /dev/null +++ b/package/icinga/src/etc/icinga/objects/contacts.cfg @@ -0,0 +1,53 @@ +############################################################################### +# CONTACTS.CFG - SAMPLE CONTACT/CONTACTGROUP DEFINITIONS +# +# NOTES: This config file provides you with some example contact and contact +# group definitions that you can reference in host and service +# definitions. +# +# You don't need to keep these definitions in a separate file from your +# other object definitions. This has been done just to make things +# easier to understand. +# +############################################################################### + + + +############################################################################### +############################################################################### +# +# CONTACTS +# +############################################################################### +############################################################################### + +# Just one contact defined by default - the Icinga admin (that's you) +# This contact definition inherits a lot of default values from the 'generic-contact' +# template which is defined elsewhere. + +define contact{ + contact_name icingaadmin ; Short name of user + use generic-contact ; Inherit default values from generic-contact template (defined above) + alias Icinga Admin ; Full name of user + + email icinga@localhost ; <<***** CHANGE THIS TO YOUR EMAIL ADDRESS ****** + } + + + +############################################################################### +############################################################################### +# +# CONTACT GROUPS +# +############################################################################### +############################################################################### + +# We only have one contact in this simple configuration file, so there is +# no need to create more than one contact group. + +define contactgroup{ + contactgroup_name admins + alias Icinga Administrators + members icingaadmin + } diff --git a/package/icinga/src/etc/icinga/objects/localhost.cfg b/package/icinga/src/etc/icinga/objects/localhost.cfg new file mode 100644 index 000000000..9dc4c4da9 --- /dev/null +++ b/package/icinga/src/etc/icinga/objects/localhost.cfg @@ -0,0 +1,167 @@ +############################################################################### +# LOCALHOST.CFG - SAMPLE OBJECT CONFIG FILE FOR MONITORING THIS MACHINE +# +# NOTE: This config file is intended to serve as an *extremely* simple +# example of how you can create configuration entries to monitor +# the local (Linux) machine. +# +############################################################################### + + + + +############################################################################### +############################################################################### +# +# HOST DEFINITION +# +############################################################################### +############################################################################### + +# Define a host for the local machine + +define host{ + use linux-server ; Name of host template to use + ; This host definition will inherit all variables that are defined + ; in (or inherited by) the linux-server host template definition. + host_name localhost + alias localhost + address 127.0.0.1 + } + + + +############################################################################### +############################################################################### +# +# HOST GROUP DEFINITION +# +############################################################################### +############################################################################### + +# Define an optional hostgroup for Linux machines + +define hostgroup{ + hostgroup_name linux-servers ; The name of the hostgroup + alias Linux Servers ; Long name of the group + members localhost ; Comma separated list of hosts that belong to this group + } + + + +############################################################################### +############################################################################### +# +# SERVICE DEFINITIONS +# +############################################################################### +############################################################################### + + +# Define a service to "ping" the local machine + +define service{ + use local-service ; Name of service template to use + host_name localhost + service_description PING + check_command check_ping!100.0,20%!500.0,60% + } + + +# Define a service to check the disk space of the root partition +# on the local machine. Warning if < 20% free, critical if +# < 10% free space on partition. + +define service{ + use local-service ; Name of service template to use + host_name localhost + service_description Root Partition + check_command check_local_disk!20%!10%!/ + } + + + +# Define a service to check the number of currently logged in +# users on the local machine. Warning if > 20 users, critical +# if > 50 users. + +define service{ + use local-service ; Name of service template to use + host_name localhost + service_description Current Users + check_command check_local_users!20!50 + } + + +# Define a service to check the number of currently running procs +# on the local machine. Warning if > 250 processes, critical if +# > 400 users. + +define service{ + use local-service ; Name of service template to use + host_name localhost + service_description Total Processes + check_command check_local_procs!250!400!RSZDT + } + + + +# Define a service to check the load on the local machine. + +define service{ + use local-service ; Name of service template to use + host_name localhost + service_description Current Load + check_command check_local_load!5.0,4.0,3.0!10.0,6.0,4.0 + } + + + +# Define a service to check the swap usage the local machine. +# Critical if less than 10% of swap is free, warning if less than 20% is free + +define service{ + use local-service ; Name of service template to use + host_name localhost + service_description Swap Usage + check_command check_local_swap!20!10 + } + + + +# Define a service to check SSH on the local machine. +# Disable notifications for this service by default, as not all users may have SSH enabled. + +define service{ + use local-service ; Name of service template to use + host_name localhost + service_description SSH + check_command check_ssh + notifications_enabled 0 + } + + + +# Define a service to check HTTP on the local machine. +# Disable notifications for this service by default, as not all users may have HTTP enabled. + +define service{ + use local-service ; Name of service template to use + host_name localhost + service_description HTTP + check_command check_http + notifications_enabled 0 + } + + +# Define a service to check current startup delay of the Icinga core daemon. +# Disable notifications for this service by default, as no thresholds are defined. + +define service{ + use local-service ; Name of service template to use + host_name localhost + service_description Icinga Startup Delay + check_command check_icinga_startup_delay + notifications_enabled 0 + } + diff --git a/package/icinga/src/etc/icinga/objects/notifications.cfg b/package/icinga/src/etc/icinga/objects/notifications.cfg new file mode 100644 index 000000000..25819a82b --- /dev/null +++ b/package/icinga/src/etc/icinga/objects/notifications.cfg @@ -0,0 +1,132 @@ +############################################################################### +# NOTIFICATIONS.CFG - SAMPLE NOTIFICATION COMMAND DEFINITIONS FOR ICINGA +# +# NOTES: This config file provides you with some example notification definitions +# that you can reference in host, service, and contact definitions. +# +# You don't need to keep commands in a separate file from your other +# object definitions. This has been done just to make things easier to +# understand. +# +# These are some advanced notification commands. They may or may not work on +# your system without modification. As an example, some systems will require +# you to use "/usr/bin/mailx" instead of "/usr/bin/mail" in the commands below. +# +# Furthermore, make sure to replace ICINGAHOST with the appropriate host name +# if used in any notification as url. +# +# Notifications are using the macros quite a lot. Watch out for your own in the +# official docs: http://docs.icinga.org/latest/en/macrolist.html +# +# Those notification commands need to be assigned to the contacts/contactgroups +# as host_notification_commands and service_notification_commands as comma +# separated list. +# +################################################################################ + + +################################################################################ +# NOTIFICATIONS BY EMAIL +# +# The idea is to add more information to the ascii-only email. This includes +# notes_url, display_name, comment+author. +# subject +# $NOTIFICATIONTYPE$ - $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ +# body +# $SHORTDATETIME$ - Info: +# +# $SERVICEOUTPUT$ +# +# $NOTIFICATIONTYPE$ - Service $SERVICEDESC$ on Host $HOSTALIAS$ is $SERVICESTATE$ +# +# (Address: $HOSTADDRESS$, Displayname: $SERVICEDISPLAYNAME$) +# +# Notes: $NOTIFICATIONAUTHOR$ $NOTIFICATIONCOMMENT$ +# $SERVICENOTESURL$ +# +# Url: +# http://ICINGAHOST/icinga/cgi-bin/status.cgi?host=$HOSTNAME$ +################################################################################ + + +# 'notify-host-by-email-advanced' command definition +define command{ + command_name notify-host-by-email-advanced + command_line /usr/bin/printf "%b" "$SHORTDATETIME$ - Info:\n\n$HOSTOUTPUT$\n\n$NOTIFICATIONTYPE$ - Host $HOSTNAME$ is $HOSTSTATE$\n\n(Address: $HOSTADDRESS$ Displayname: $HOSTDISPLAYNAME$)\n\nNotes: $NOTIFICATIONAUTHOR$ $NOTIFICATIONCOMMENT$\n$HOSTNOTESURL$\n\nUrl:\nhttp://ICINGAHOST/icinga/cgi-bin/extinfo.cgi?type=1&host=$HOSTNAME$\n\n" | /usr/bin/mail -s "$NOTIFICATIONTYPE$ - $HOSTNAME$ is $HOSTSTATE$" $CONTACTEMAIL$ + } + +# 'notify-service-by-email-advanced' command definition +define command{ + command_name notify-service-by-email-advanced + command_line /usr/bin/printf "%b" "$SHORTDATETIME$ - Info:\n\n$SERVICEOUTPUT$\n\n$NOTIFICATIONTYPE$ - Service $SERVICEDESC$ on Host $HOSTALIAS$ is $SERVICESTATE$\n\n(Address: $HOSTADDRESS$ Displayname: $SERVICEDISPLAYNAME$)\n\nNotes: $NOTIFICATIONAUTHOR$ $NOTIFICATIONCOMMENT$\n$SERVICENOTESURL$\n\nUrl:\nhttp://ICINGAHOST/icinga/cgi-bin/status.cgi?host=$HOSTNAME$\n\n" | /usr/bin/mail -s "$NOTIFICATIONTYPE$ - $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$" $CONTACTEMAIL$ + } + + +################################################################################ +# NOTIFICATIONS BY JABBER (XMPP) +# +# http://www.gridpp.ac.uk/wiki/Nagios_jabber_notification +# check contrib/notifications/notify_via_jabber for the script and copy it to +# $USER1$ location (check resource.cfg) +# +# Hint: make sure to define 'pager' as contact attribute! Alternatively, replace +# $CONTACTPAGER$ with $CONTACTADDRESS1$ and use 'address1' attribute instead. +################################################################################ + +define command { + command_name notify-service-by-jabber + command_line $USER1$/notify_via_jabber $CONTACTPAGER$ "$SHORTDATETIME$ - Info: $SERVICEOUTPUT$ | $NOTIFICATIONTYPE$ - Service $SERVICEDESC$ on Host $HOSTALIAS$ is $SERVICESTATE$ | (Address: $HOSTADDRESS$ Displayname: $SERVICEDISPLAYNAME$) | Notes: $NOTIFICATIONAUTHOR$ $NOTIFICATIONCOMMENT$ $SERVICENOTESURL$ | Url: http://ICINGAHOST/icinga/cgi-bin/status.cgi?host=$HOSTNAME$" + } + +define command { + command_name notify-host-by-jabber + command_line $USER1$notify_via_jabber $CONTACTPAGER$ "$SHORTDATETIME$ - Info: $HOSTOUTPUT$ | $NOTIFICATIONTYPE$ - Host $HOSTNAME$ is $HOSTSTATE$ | (Address: $HOSTADDRESS$ Displayname: $HOSTDISPLAYNAME$) | Notes: $NOTIFICATIONAUTHOR$ $NOTIFICATIONCOMMENT$ $HOSTNOTESURL$ | Url: http://ICINGAHOST/icinga/cgi-bin/extinfo.cgi?type=1&host=$HOSTNAME$" + } + + +################################################################################ +# NOTIFICATIONS BY TWITTER +# +# https://wiki.icinga.org/display/howtos/notify+via+Twitter +################################################################################ + +define command { + command_name notify-host-by-twitter + command_line $USER1$/eventhandler_twitter.php -t "HOST" -h "$HOSTALIAS$" -s "$HOSTSTATE$" -o "$HOSTOUTPUT$" +} + +define command { + command_name notify-service-by-twitter + command_line $USER1$/eventhandler_twitter.php -t "SERVICE" -h "$HOSTALIAS$" -s "$SERVICESTATE$" -d "$SERVICEDESC$" -o "$SERVICEOUTPUT$" +} + + +################################################################################ +# NOTIFICATIONS BY SMS +# +# First off, you need either a local sms service, or an sms gateway. Besides +# an applicable plugin interacting the that api and integrated as notification +# command. Below is only the command example. +################################################################################ + + +define command { + command_name notify-host-by-sms + command_line /usr/bin/printf "%b" "$NOTIFICATIONTYPE$ - $HOSTNAME$ is $HOSTSTATE$ $SHORTDATETIME$ - Info:\n\n$HOSTOUTPUT$\n\n($HOSTADDRESS$)" | $USER1$/notify_via_sms $CONTACTPAGER$ + } + + +define command { + command_name notify-service-by-sms + command_line /usr/bin/printf "%b" "$NOTIFICATIONTYPE$ - $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ $SHORTDATETIME$ - Info:\n\n$SERVICEOUTPUT$\n\n($HOSTADDRESS$)" | $USER1$/notify_via_sms $CONTACTPAGER$ + } + + + +################################################################################ +# MORE NOTIFICATION POSSIBILITIES +# +# NoMa: https://www.netways.org/projects/noma/ +# IRCBot: http://www.vanheusden.com/nagircbot/ +################################################################################ + diff --git a/package/icinga/src/etc/icinga/objects/printer.cfg b/package/icinga/src/etc/icinga/objects/printer.cfg new file mode 100644 index 000000000..815b55fdb --- /dev/null +++ b/package/icinga/src/etc/icinga/objects/printer.cfg @@ -0,0 +1,83 @@ +############################################################################### +# PRINTER.CFG - SAMPLE CONFIG FILE FOR MONITORING A NETWORK PRINTER +# +# NOTES: This config file assumes that you are using the sample configuration +# files that get installed with the Icinga quickstart guide. +# +############################################################################### + + + + +############################################################################### +############################################################################### +# +# HOST DEFINITIONS +# +############################################################################### +############################################################################### + +# Define a host for the printer we'll be monitoring +# Change the host_name, alias, and address to fit your situation + +define host{ + use generic-printer ; Inherit default values from a template + host_name hplj2605dn ; The name we're giving to this printer + alias HP LaserJet 2605dn ; A longer name associated with the printer + address 192.168.1.30 ; IP address of the printer + hostgroups network-printers ; Host groups this printer is associated with + } + + + + +############################################################################### +############################################################################### +# +# HOST GROUP DEFINITIONS +# +############################################################################### +############################################################################### + +# A hostgroup for network printers + +define hostgroup{ + hostgroup_name network-printers ; The name of the hostgroup + alias Network Printers ; Long name of the group + } + + + + +############################################################################### +############################################################################### +# +# SERVICE DEFINITIONS +# +############################################################################### +############################################################################### + +# Create a service for monitoring the status of the printer +# Change the host_name to match the name of the host you defined above +# If the printer has an SNMP community string other than "public", change the check_command directive to reflect that + +define service{ + use generic-service ; Inherit values from a template + host_name hplj2605dn ; The name of the host the service is associated with + service_description Printer Status ; The service description + check_command check_hpjd!-C public ; The command used to monitor the service + normal_check_interval 10 ; Check the service every 10 minutes under normal conditions + retry_check_interval 1 ; Re-check the service every minute until its final/hard state is determined + } + + +# Create a service for "pinging" the printer occassionally. Useful for monitoring RTA, packet loss, etc. + +define service{ + use generic-service + host_name hplj2605dn + service_description PING + check_command check_ping!3000.0,80%!5000.0,100% + normal_check_interval 10 + retry_check_interval 1 + } diff --git a/package/icinga/src/etc/icinga/objects/switch.cfg b/package/icinga/src/etc/icinga/objects/switch.cfg new file mode 100644 index 000000000..d19aaedb2 --- /dev/null +++ b/package/icinga/src/etc/icinga/objects/switch.cfg @@ -0,0 +1,111 @@ +############################################################################### +# SWITCH.CFG - SAMPLE CONFIG FILE FOR MONITORING A SWITCH +# +# NOTES: This config file assumes that you are using the sample configuration +# files that get installed with the Icinga quickstart guide. +# +############################################################################### + + + + +############################################################################### +############################################################################### +# +# HOST DEFINITIONS +# +############################################################################### +############################################################################### + +# Define the switch that we'll be monitoring + +define host{ + use generic-switch ; Inherit default values from a template + host_name linksys-srw224p ; The name we're giving to this switch + alias Linksys SRW224P Switch ; A longer name associated with the switch + address 192.168.1.253 ; IP address of the switch + hostgroups switches ; Host groups this switch is associated with + } + + + + +############################################################################### +############################################################################### +# +# HOST GROUP DEFINITIONS +# +############################################################################### +############################################################################### + +# Create a new hostgroup for switches + +define hostgroup{ + hostgroup_name switches ; The name of the hostgroup + alias Network Switches ; Long name of the group + } + + + + +############################################################################### +############################################################################### +# +# SERVICE DEFINITIONS +# +############################################################################### +############################################################################### + +# Create a service to PING to switch + +define service{ + use generic-service ; Inherit values from a template + host_name linksys-srw224p ; The name of the host the service is associated with + service_description PING ; The service description + check_command check_ping!200.0,20%!600.0,60% ; The command used to monitor the service + normal_check_interval 5 ; Check the service every 5 minutes under normal conditions + retry_check_interval 1 ; Re-check the service every minute until its final/hard state is determined + } + + +# Monitor uptime via SNMP + +define service{ + use generic-service ; Inherit values from a template + host_name linksys-srw224p + service_description Uptime + check_command check_snmp!-C public -o sysUpTime.0 + } + + + +# Monitor Port 1 status via SNMP + +define service{ + use generic-service ; Inherit values from a template + host_name linksys-srw224p + service_description Port 1 Link Status + check_command check_snmp!-C public -o ifOperStatus.1 -r 1 -m RFC1213-MIB + } + + + +# Monitor bandwidth via MRTG logs + +define service{ + use generic-service ; Inherit values from a template + host_name linksys-srw224p + service_description Port 1 Bandwidth Usage + check_command check_local_mrtgtraf!/var/lib/mrtg/192.168.1.253_1.log!AVG!1000000,1000000!5000000,5000000!10 + } + + + + + + + + + + + diff --git a/package/icinga/src/etc/icinga/objects/templates.cfg b/package/icinga/src/etc/icinga/objects/templates.cfg new file mode 100644 index 000000000..68c32336f --- /dev/null +++ b/package/icinga/src/etc/icinga/objects/templates.cfg @@ -0,0 +1,188 @@ +############################################################################### +# TEMPLATES.CFG - SAMPLE OBJECT TEMPLATES +# +# NOTES: This config file provides you with some example object definition +# templates that are refered by other host, service, contact, etc. +# definitions in other config files. +# +# You don't need to keep these definitions in a separate file from your +# other object definitions. This has been done just to make things +# easier to understand. +# +############################################################################### + + + +############################################################################### +############################################################################### +# +# CONTACT TEMPLATES +# +############################################################################### +############################################################################### + +# Generic contact definition template - This is NOT a real contact, just a template! + +define contact{ + name generic-contact ; The name of this contact template + service_notification_period 24x7 ; service notifications can be sent anytime + host_notification_period 24x7 ; host notifications can be sent anytime + service_notification_options w,u,c,r,f,s ; send notifications for all service states, flapping events, and scheduled downtime events + host_notification_options d,u,r,f,s ; send notifications for all host states, flapping events, and scheduled downtime events + service_notification_commands notify-service-by-email ; send service notifications via email + host_notification_commands notify-host-by-email ; send host notifications via email + register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL CONTACT, JUST A TEMPLATE! + } + + + + +############################################################################### +############################################################################### +# +# HOST TEMPLATES +# +############################################################################### +############################################################################### + +# Generic host definition template - This is NOT a real host, just a template! + +define host{ + name generic-host ; The name of this host template + notifications_enabled 1 ; Host notifications are enabled + event_handler_enabled 1 ; Host event handler is enabled + flap_detection_enabled 1 ; Flap detection is enabled + failure_prediction_enabled 1 ; Failure prediction is enabled + process_perf_data 1 ; Process performance data + retain_status_information 1 ; Retain status information across program restarts + retain_nonstatus_information 1 ; Retain non-status information across program restarts + notification_period 24x7 ; Send host notifications at any time + register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE! + } + + +# Linux host definition template - This is NOT a real host, just a template! + +define host{ + name linux-server ; The name of this host template + use generic-host ; This template inherits other values from the generic-host template + check_period 24x7 ; By default, Linux hosts are checked round the clock + check_interval 5 ; Actively check the host every 5 minutes + retry_interval 1 ; Schedule host check retries at 1 minute intervals + max_check_attempts 10 ; Check each Linux host 10 times (max) + check_command check-host-alive ; Default command to check Linux hosts + notification_period workhours ; Linux admins hate to be woken up, so we only notify during the day + ; Note that the notification_period variable is being overridden from + ; the value that is inherited from the generic-host template! + notification_interval 120 ; Resend notifications every 2 hours + notification_options d,u,r ; Only send notifications for specific host states + contact_groups admins ; Notifications get sent to the admins by default + register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE! + } + + + +# Windows host definition template - This is NOT a real host, just a template! + +define host{ + name windows-server ; The name of this host template + use generic-host ; Inherit default values from the generic-host template + check_period 24x7 ; By default, Windows servers are monitored round the clock + check_interval 5 ; Actively check the server every 5 minutes + retry_interval 1 ; Schedule host check retries at 1 minute intervals + max_check_attempts 10 ; Check each server 10 times (max) + check_command check-host-alive ; Default command to check if servers are "alive" + notification_period 24x7 ; Send notification out at any time - day or night + notification_interval 30 ; Resend notifications every 30 minutes + notification_options d,r ; Only send notifications for specific host states + contact_groups admins ; Notifications get sent to the admins by default + hostgroups windows-servers ; Host groups that Windows servers should be a member of + register 0 ; DONT REGISTER THIS - ITS JUST A TEMPLATE + } + + +# We define a generic printer template that can be used for most printers we monitor + +define host{ + name generic-printer ; The name of this host template + use generic-host ; Inherit default values from the generic-host template + check_period 24x7 ; By default, printers are monitored round the clock + check_interval 5 ; Actively check the printer every 5 minutes + retry_interval 1 ; Schedule host check retries at 1 minute intervals + max_check_attempts 10 ; Check each printer 10 times (max) + check_command check-host-alive ; Default command to check if printers are "alive" + notification_period workhours ; Printers are only used during the workday + notification_interval 30 ; Resend notifications every 30 minutes + notification_options d,r ; Only send notifications for specific host states + contact_groups admins ; Notifications get sent to the admins by default + register 0 ; DONT REGISTER THIS - ITS JUST A TEMPLATE + } + + +# Define a template for switches that we can reuse +define host{ + name generic-switch ; The name of this host template + use generic-host ; Inherit default values from the generic-host template + check_period 24x7 ; By default, switches are monitored round the clock + check_interval 5 ; Switches are checked every 5 minutes + retry_interval 1 ; Schedule host check retries at 1 minute intervals + max_check_attempts 10 ; Check each switch 10 times (max) + check_command check-host-alive ; Default command to check if routers are "alive" + notification_period 24x7 ; Send notifications at any time + notification_interval 30 ; Resend notifications every 30 minutes + notification_options d,r ; Only send notifications for specific host states + contact_groups admins ; Notifications get sent to the admins by default + register 0 ; DONT REGISTER THIS - ITS JUST A TEMPLATE + } + + + + +############################################################################### +############################################################################### +# +# SERVICE TEMPLATES +# +############################################################################### +############################################################################### + +# Generic service definition template - This is NOT a real service, just a template! + +define service{ + name generic-service ; The 'name' of this service template + active_checks_enabled 1 ; Active service checks are enabled + passive_checks_enabled 1 ; Passive service checks are enabled/accepted + parallelize_check 1 ; Active service checks should be parallelized (disabling this can lead to major performance problems) + obsess_over_service 1 ; We should obsess over this service (if necessary) + check_freshness 0 ; Default is to NOT check service 'freshness' + notifications_enabled 1 ; Service notifications are enabled + event_handler_enabled 1 ; Service event handler is enabled + flap_detection_enabled 1 ; Flap detection is enabled + failure_prediction_enabled 1 ; Failure prediction is enabled + process_perf_data 1 ; Process performance data + retain_status_information 1 ; Retain status information across program restarts + retain_nonstatus_information 1 ; Retain non-status information across program restarts + is_volatile 0 ; The service is not volatile + check_period 24x7 ; The service can be checked at any time of the day + max_check_attempts 3 ; Re-check the service up to 3 times in order to determine its final (hard) state + normal_check_interval 10 ; Check the service every 10 minutes under normal conditions + retry_check_interval 2 ; Re-check the service every two minutes until a hard state can be determined + contact_groups admins ; Notifications get sent out to everyone in the 'admins' group + notification_options w,u,c,r ; Send notifications about warning, unknown, critical, and recovery events + notification_interval 60 ; Re-notify about service problems every hour + notification_period 24x7 ; Notifications can be sent out at any time + register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE! + } + + +# Local service definition template - This is NOT a real service, just a template! + +define service{ + name local-service ; The name of this service template + use generic-service ; Inherit default values from the generic-service definition + max_check_attempts 4 ; Re-check the service up to 4 times in order to determine its final (hard) state + normal_check_interval 5 ; Check the service every 5 minutes under normal conditions + retry_check_interval 1 ; Re-check the service every minute until a hard state can be determined + register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE! + } + diff --git a/package/icinga/src/etc/icinga/objects/timeperiods.cfg b/package/icinga/src/etc/icinga/objects/timeperiods.cfg new file mode 100644 index 000000000..35e862768 --- /dev/null +++ b/package/icinga/src/etc/icinga/objects/timeperiods.cfg @@ -0,0 +1,92 @@ +############################################################################### +# TIMEPERIODS.CFG - SAMPLE TIMEPERIOD DEFINITIONS +# +# NOTES: This config file provides you with some example timeperiod definitions +# that you can reference in host, service, contact, and dependency +# definitions. +# +# You don't need to keep timeperiods in a separate file from your other +# object definitions. This has been done just to make things easier to +# understand. +# +############################################################################### + + + +############################################################################### +############################################################################### +# +# TIME PERIODS +# +############################################################################### +############################################################################### + +# This defines a timeperiod where all times are valid for checks, +# notifications, etc. The classic "24x7" support nightmare. :-) +define timeperiod{ + timeperiod_name 24x7 + alias 24 Hours A Day, 7 Days A Week + sunday 00:00-24:00 + monday 00:00-24:00 + tuesday 00:00-24:00 + wednesday 00:00-24:00 + thursday 00:00-24:00 + friday 00:00-24:00 + saturday 00:00-24:00 + } + + +# 'workhours' timeperiod definition +define timeperiod{ + timeperiod_name workhours + alias Normal Work Hours + monday 09:00-17:00 + tuesday 09:00-17:00 + wednesday 09:00-17:00 + thursday 09:00-17:00 + friday 09:00-17:00 + } + + +# 'none' timeperiod definition +define timeperiod{ + timeperiod_name none + alias No Time Is A Good Time + } + + +# Some U.S. holidays +# Note: The timeranges for each holiday are meant to *exclude* the holidays from being +# treated as a valid time for notifications, etc. You probably don't want your pager +# going off on New Year's. Although you're employer might... :-) +define timeperiod{ + name us-holidays + timeperiod_name us-holidays + alias U.S. Holidays + + january 1 00:00-00:00 ; New Years + monday -1 may 00:00-00:00 ; Memorial Day (last Monday in May) + july 4 00:00-00:00 ; Independence Day + monday 1 september 00:00-00:00 ; Labor Day (first Monday in September) + thursday 4 november 00:00-00:00 ; Thanksgiving (4th Thursday in November) + december 25 00:00-00:00 ; Christmas + } + + +# This defines a modified "24x7" timeperiod that covers every day of the +# year, except for U.S. holidays (defined in the timeperiod above). +define timeperiod{ + timeperiod_name 24x7_sans_holidays + alias 24x7 Sans Holidays + + use us-holidays ; Get holiday exceptions from other timeperiod + + sunday 00:00-24:00 + monday 00:00-24:00 + tuesday 00:00-24:00 + wednesday 00:00-24:00 + thursday 00:00-24:00 + friday 00:00-24:00 + saturday 00:00-24:00 + } + diff --git a/package/icinga/src/etc/icinga/objects/windows.cfg b/package/icinga/src/etc/icinga/objects/windows.cfg new file mode 100644 index 000000000..c3b917852 --- /dev/null +++ b/package/icinga/src/etc/icinga/objects/windows.cfg @@ -0,0 +1,143 @@ +############################################################################### +# WINDOWS.CFG - SAMPLE CONFIG FILE FOR MONITORING A WINDOWS MACHINE +# +# NOTES: This config file assumes that you are using the sample configuration +# files that get installed with the Icinga quickstart guide. +# +############################################################################### + + + + +############################################################################### +############################################################################### +# +# HOST DEFINITIONS +# +############################################################################### +############################################################################### + +# Define a host for the Windows machine we'll be monitoring +# Change the host_name, alias, and address to fit your situation + +define host{ + use windows-server ; Inherit default values from a template + host_name winserver ; The name we're giving to this host + alias My Windows Server ; A longer name associated with the host + address 192.168.1.2 ; IP address of the host + } + + + + +############################################################################### +############################################################################### +# +# HOST GROUP DEFINITIONS +# +############################################################################### +############################################################################### + + +# Define a hostgroup for Windows machines +# All hosts that use the windows-server template will automatically be a member of this group + +define hostgroup{ + hostgroup_name windows-servers ; The name of the hostgroup + alias Windows Servers ; Long name of the group + } + + + + +############################################################################### +############################################################################### +# +# SERVICE DEFINITIONS +# +############################################################################### +############################################################################### + + +# Create a service for monitoring the version of NSCLient++ that is installed +# Change the host_name to match the name of the host you defined above + +define service{ + use generic-service + host_name winserver + service_description NSClient++ Version + check_command check_nt!CLIENTVERSION + } + + + +# Create a service for monitoring the uptime of the server +# Change the host_name to match the name of the host you defined above + +define service{ + use generic-service + host_name winserver + service_description Uptime + check_command check_nt!UPTIME + } + + + +# Create a service for monitoring CPU load +# Change the host_name to match the name of the host you defined above + +define service{ + use generic-service + host_name winserver + service_description CPU Load + check_command check_nt!CPULOAD!-l 5,80,90 + } + + + +# Create a service for monitoring memory usage +# Change the host_name to match the name of the host you defined above + +define service{ + use generic-service + host_name winserver + service_description Memory Usage + check_command check_nt!MEMUSE!-w 80 -c 90 + } + + + +# Create a service for monitoring C:\ disk usage +# Change the host_name to match the name of the host you defined above + +define service{ + use generic-service + host_name winserver + service_description C:\ Drive Space + check_command check_nt!USEDDISKSPACE!-l c -w 80 -c 90 + } + + + +# Create a service for monitoring the W3SVC service +# Change the host_name to match the name of the host you defined above + +define service{ + use generic-service + host_name winserver + service_description W3SVC + check_command check_nt!SERVICESTATE!-d SHOWALL -l W3SVC + } + + + +# Create a service for monitoring the Explorer.exe process +# Change the host_name to match the name of the host you defined above + +define service{ + use generic-service + host_name winserver + service_description Explorer + check_command check_nt!PROCSTATE!-d SHOWALL -l Explorer.exe + } + diff --git a/package/icinga/src/etc/icinga/resource.cfg b/package/icinga/src/etc/icinga/resource.cfg new file mode 100644 index 000000000..d8f3e1473 --- /dev/null +++ b/package/icinga/src/etc/icinga/resource.cfg @@ -0,0 +1,32 @@ +########################################################################### +# +# RESOURCE.CFG - Sample Resource File for Icinga +# +# You can define $USERx$ macros in this file, which can in turn be used +# in command definitions in your host config file(s). $USERx$ macros are +# useful for storing sensitive information such as usernames, passwords, +# etc. They are also handy for specifying the path to plugins and +# event handlers - if you decide to move the plugins or event handlers to +# a different directory in the future, you can just update one or two +# $USERx$ macros, instead of modifying a lot of command definitions. +# +# The CGIs will not attempt to read the contents of resource files, so +# you can set restrictive permissions (600 or 660) on them. +# +# Icinga supports up to 32 $USERx$ macros ($USER1$ through $USER32$) +# +# Resource files may also be used to store configuration directives for +# external data sources like MySQL... +# +########################################################################### + +# Sets $USER1$ to be the path to the plugins +$USER1$=/usr/libexec + +# Sets $USER2$ to be the path to event handlers +#$USER2$=/usr/libexec/eventhandlers + +# Store some usernames and passwords (hidden from the CGIs) +#$USER3$=someuser +#$USER4$=somepassword + |