summaryrefslogtreecommitdiff
path: root/target/waldux/config/Config.in.usb
diff options
context:
space:
mode:
authorWaldemar Brodkorb <wbx@uclibc-ng.org>2018-03-03 15:46:47 +0100
committerWaldemar Brodkorb <wbx@uclibc-ng.org>2018-03-07 20:44:04 +0100
commit9bb871a0bb4c239239944d28bd4d5cfa19d84f62 (patch)
treeb1c2eee95a3b475748c89d0075f604bb159a3271 /target/waldux/config/Config.in.usb
parenta4767b13763b91dfb0aa75d2985d63d7ed9cb64c (diff)
add support for waldux
Diffstat (limited to 'target/waldux/config/Config.in.usb')
-rw-r--r--target/waldux/config/Config.in.usb378
1 files changed, 378 insertions, 0 deletions
diff --git a/target/waldux/config/Config.in.usb b/target/waldux/config/Config.in.usb
new file mode 100644
index 000000000..04d4e7756
--- /dev/null
+++ b/target/waldux/config/Config.in.usb
@@ -0,0 +1,378 @@
+# This file is part of the OpenADK project. OpenADK is copyrighted
+# material, please see the LICENCE file in the top-level directory.
+
+menu "USB support"
+depends on ADK_TARGET_WITH_USB \
+ || ADK_TARGET_SYSTEM_QEMU_X86_64 \
+ || ADK_TARGET_SYSTEM_QEMU_X86 \
+ || ADK_TARGET_GENERIC
+
+config ADK_WALDUX_KERNEL_USB_SUPPORT
+ bool
+
+config ADK_WALDUX_KERNEL_USB_DEVICE_CLASS
+ bool
+
+config ADK_WALDUX_KERNEL_USB_ANNOUNCE_NEW_DEVICES
+ bool
+
+config ADK_WALDUX_KERNEL_USB_EHCI_ROOT_HUB_TT
+ bool
+
+config ADK_WALDUX_KERNEL_USB_EHCI_TT_NEWSCHED
+ bool
+
+config ADK_WALDUX_KERNEL_USB_EHCI_MXC
+ bool
+
+config ADK_WALDUX_KERNEL_USB_GADGET
+ tristate
+
+config ADK_WALDUX_KERNEL_USB_PHY
+ bool
+
+config ADK_WALDUX_KERNEL_USB_MXS_PHY
+ tristate
+ select ADK_WALDUX_KERNEL_USB_PHY
+ default m if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6
+ default n
+
+config ADK_WALDUX_KERNEL_USB_OHCI_HCD_PLATFORM
+ bool
+ select ADK_WALDUX_KERNEL_USB_OHCI_HCD
+
+config ADK_WALDUX_KERNEL_USB_OHCI_HCD_PCI
+ bool
+
+config ADK_WALDUX_KERNEL_USB_LIBUSUAL
+ tristate
+
+config ADK_WALDUX_KERNEL_USB_NET_DRIVERS
+ bool
+
+config ADK_WALDUX_KERNEL_USB_USBNET
+ select ADK_WALDUX_KERNEL_USB_NET_DRIVERS
+ tristate
+
+config ADK_WALDUX_KERNEL_USB
+ tristate "USB support"
+ select ADK_WALDUX_KERNEL_NLS
+ select ADK_WALDUX_KERNEL_USB_SUPPORT
+ select ADK_WALDUX_KERNEL_USB_ANNOUNCE_NEW_DEVICES
+ default m if ADK_TARGET_SYSTEM_ASUS_P5BVM
+ default m if ADK_TARGET_SYSTEM_PCENGINES_APU
+ default m if ADK_TARGET_SYSTEM_PCENGINES_ALIX
+ default m if ADK_TARGET_SYSTEM_IBM_X40
+ default m if ADK_TARGET_SYSTEM_LEMOTE_YEELONG
+ default m if ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20
+ default m if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6
+ default y if ADK_TARGET_SYSTEM_KINETIS_K70
+ default y if ADK_TARGET_SYSTEM_SOLIDRUN_CLEARFOG
+ default n
+ help
+ Universal Serial Bus (USB) is a specification for a serial bus
+ subsystem which offers higher speeds and more features than the
+ traditional PC serial port. The bus supplies power to peripherals
+ and allows for hot swapping. Up to 127 USB peripherals can be
+ connected to a single USB host in a tree structure.
+
+ The USB host is the root of the tree, the peripherals are the
+ leaves and the inner nodes are special USB devices called hubs.
+ Most PCs now have USB host ports, used to connect peripherals
+ such as scanners, keyboards, mice, modems, cameras, disks,
+ flash memory, network links, and printers to the PC.
+
+ Say Y here if your computer has a host-side USB port and you want
+ to use USB devices. You then need to say Y to at least one of the
+ Host Controller Driver (HCD) options below. Choose a USB 1.1
+ controller, such as "UHCI HCD support" or "OHCI HCD support",
+ and "EHCI HCD (USB 2.0) support" except for older systems that
+ do not have USB 2.0 support. It doesn't normally hurt to select
+ them all if you are not certain.
+
+ If your system has a device-side USB port, used in the peripheral
+ side of the USB protocol, see the "USB Gadget" framework instead.
+
+ After choosing your HCD, then select drivers for the USB peripherals
+ you'll be using. You may want to check out the information provided
+ in <file:Documentation/usb/> and especially the links given in
+ <file:Documentation/usb/usb-help.txt>.
+
+menu "USB controller support"
+
+config ADK_WALDUX_KERNEL_USB_EHCI_HCD
+ tristate "Support for USB EHCI 2.0 controllers"
+ select ADK_WALDUX_KERNEL_USB_MXS_PHY if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6
+ select ADK_WALDUX_KERNEL_USB_EHCI_MXC if ADK_TARGET_SYSTEM_KINETIS_K70
+ select ADK_WALDUX_KERNEL_USB_DEVICE_CLASS if ADK_TARGET_SYSTEM_KINETIS_K70
+ depends on !ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20
+ depends on !ADK_TARGET_BOARD_BCM28XX
+ depends on ADK_WALDUX_KERNEL_USB
+ default m if ADK_TARGET_SYSTEM_ASUS_P5BVM
+ default m if ADK_TARGET_SYSTEM_PCENGINES_APU
+ default m if ADK_TARGET_SYSTEM_PCENGINES_ALIX
+ default m if ADK_TARGET_SYSTEM_IBM_X40
+ default m if ADK_TARGET_SYSTEM_LEMOTE_YEELONG
+ default m if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6
+ default y if ADK_TARGET_SYSTEM_KINETIS_K70
+ default y if ADK_TARGET_SYSTEM_SOLIDRUN_CLEARFOG
+ default n
+ help
+ The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
+ "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
+ If your USB host controller supports USB 2.0, you will likely want to
+ configure this Host Controller Driver. At the time of this writing,
+ the primary implementation of EHCI is a chip from NEC, widely available
+ in add-on PCI cards, but implementations are in the works from other
+ vendors including Intel and Philips. Motherboard support is appearing.
+
+ EHCI controllers are packaged with "companion" host controllers (OHCI
+ or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports
+ will connect to EHCI if the device is high speed, otherwise they
+ connect to a companion controller. If you configure EHCI, you should
+ probably configure the OHCI (for NEC and some other vendors) USB Host
+ Controller Driver or UHCI (for Via motherboards) Host Controller
+ Driver too.
+
+ You may want to read <file:Documentation/usb/ehci.txt>.
+
+config ADK_WALDUX_KERNEL_USB_UHCI_HCD
+ tristate "Support for UHCI controllers"
+ depends on ADK_WALDUX_KERNEL_USB
+ depends on !ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20
+ depends on !ADK_TARGET_BOARD_BCM28XX
+ default m if ADK_TARGET_SYSTEM_ASUS_P5BVM
+ default m if ADK_TARGET_SYSTEM_PCENGINES_APU
+ default m if ADK_TARGET_SYSTEM_PCENGINES_ALIX
+ default m if ADK_TARGET_SYSTEM_IBM_X40
+ default m if ADK_TARGET_SYSTEM_LEMOTE_YEELONG
+ default n
+ help
+ The Universal Host Controller Interface is a standard by Intel for
+ accessing the USB hardware in the PC (which is also called the USB
+ host controller). If your USB host controller conforms to this
+ standard, you may want to say Y, but see below. All recent boards
+ with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
+ i810, i820) conform to this standard. Also all VIA PCI chipsets
+ (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
+ 133). If unsure, say Y.
+
+config ADK_WALDUX_KERNEL_USB_OHCI_HCD
+ tristate "Support for OHCI controllers"
+ depends on ADK_WALDUX_KERNEL_USB
+ depends on !ADK_TARGET_BOARD_BCM28XX
+ select ADK_WALDUX_KERNEL_USB_OHCI_HCD_PCI if ADK_TARGET_SYSTEM_PCENGINES_ALIX
+ select ADK_WALDUX_KERNEL_USB_OHCI_HCD_PCI if ADK_TARGET_SYSTEM_PCENGINES_APU
+ select ADK_WALDUX_KERNEL_USB_OHCI_HCD_PCI if ADK_TARGET_SYSTEM_ASUS_P5BVM
+ default m if ADK_TARGET_SYSTEM_ASUS_P5BVM
+ default m if ADK_TARGET_SYSTEM_PCENGINES_APU
+ default m if ADK_TARGET_SYSTEM_PCENGINES_ALIX
+ default m if ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20
+ default m if ADK_TARGET_SYSTEM_LEMOTE_YEELONG
+ default n
+ help
+ The Open Host Controller Interface (OHCI) is a standard for accessing
+ USB 1.1 host controller hardware. It does more in hardware than Intel's
+ UHCI specification. If your USB host controller follows the OHCI spec,
+ say Y. On most non-x86 systems, and on x86 hardware that's not using a
+ USB controller from Intel or VIA, this is appropriate. If your host
+ controller doesn't use PCI, this is probably appropriate. For a PCI
+ based system where you're not sure, the "lspci -v" entry will list the
+ right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
+
+config ADK_WALDUX_KERNEL_USB_DWCOTG
+ bool "Support for DWCOTG controller"
+ select ADK_WALDUX_KERNEL_USB
+ select ADK_WALDUX_KERNEL_FIQ
+ depends on ADK_TARGET_BOARD_BCM28XX
+ default y if ADK_TARGET_BOARD_BCM28XX
+ default n
+ help
+ The Synopsis DWC controller is a dual-role
+ host/peripheral/OTG ("On The Go") USB controllers.
+
+config ADK_WALDUX_KERNEL_USB_CHIPIDEA_UDC
+ bool
+
+config ADK_WALDUX_KERNEL_USB_CHIPIDEA_HOST
+ bool
+
+config ADK_WALDUX_KERNEL_USB_CHIPIDEA
+ tristate "Support for ChipIdea controller"
+ select ADK_WALDUX_KERNEL_USB_CHIPIDEA_UDC
+ select ADK_WALDUX_KERNEL_USB_CHIPIDEA_HOST
+ select ADK_WALDUX_KERNEL_USB_GADGET
+ depends on ADK_WALDUX_KERNEL_USB_EHCI_HCD
+ depends on ADK_TARGET_SYSTEM_SOLIDRUN_IMX6
+ default m if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6
+ default n
+
+config ADK_WALDUX_KERNEL_USB_ISP116X_HCD
+ tristate "Support for ISP116X"
+ depends on ADK_WALDUX_KERNEL_USB
+ depends on !ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20
+ depends on !ADK_TARGET_BOARD_BCM28XX
+ help
+ The ISP1160 and ISP1161 chips are USB host controllers. Enable this
+ option if your board has this chip. If unsure, say N.
+
+ This driver does not support isochronous transfers.
+
+config ADK_WALDUX_KERNEL_USB_SL811_HCD
+ tristate "Support for SL811HS"
+ depends on ADK_WALDUX_KERNEL_USB
+ depends on !ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20
+ depends on !ADK_TARGET_BOARD_BCM28XX
+ default n
+ help
+ The SL811HS is a single-port USB controller that supports either
+ host side or peripheral side roles. Enable this option if your
+ board has this chip, and you want to use it as a host controller.
+ If unsure, say N.
+
+endmenu
+
+menu "USB devices support"
+
+config ADK_WALDUX_KERNEL_USB_STORAGE
+ tristate "Support for USB storage devices"
+ select ADK_WALDUX_KERNEL_SCSI
+ select ADK_WALDUX_KERNEL_BLK_DEV_SD
+
+config ADK_WALDUX_KERNEL_SND_USB_AUDIO
+ tristate "Support for USB sound adapter"
+ select ADK_WALDUX_KERNEL_SND
+ select ADK_WALDUX_KERNEL_SND_USB
+ select ADK_WALDUX_KERNEL_SND_RAWMIDI
+
+config ADK_WALDUX_KERNEL_USB_HSO
+ tristate "Support for USB HSO devices"
+ select ADK_WALDUX_KERNEL_RFKILL
+ select ADK_WALDUX_KERNEL_USB_STORAGE
+
+config ADK_WALDUX_KERNEL_USB_PRINTER
+ tristate "Support for USB printers"
+
+config ADK_WALDUX_KERNEL_USB_ACM
+ tristate "Support for USB modems/isdn controllers"
+
+config ADK_WALDUX_KERNEL_USB_PEGASUS
+ tristate "Support for USB Pegasus network cards"
+ select ADK_WALDUX_KERNEL_USB_NET_DRIVERS
+
+config ADK_WALDUX_KERNEL_USB_SERIAL
+ tristate "Support for USB-to-serial converters"
+ help
+ Say Y here if you have a USB device that provides normal serial
+ ports, or acts like a serial device, and you want to connect it to
+ your USB bus.
+
+ Please read <file:Documentation/usb/usb-serial.txt> for more
+ information on the specifics of the different devices that are
+ supported, and on how to use them.
+
+config ADK_WALDUX_KERNEL_USB_SERIAL_BELKIN
+ tristate "Support for Belkin USB-to-serial converters"
+ depends on ADK_WALDUX_KERNEL_USB_SERIAL
+ help
+ Say Y here if you want to use a Belkin USB Serial single port
+ adaptor (F5U103 is one of the model numbers) or the Peracom single
+ port USB to serial adapter.
+
+config ADK_WALDUX_KERNEL_USB_SERIAL_FTDI_SIO
+ tristate "Support for FTDI USB-to-serial converter"
+ depends on ADK_WALDUX_KERNEL_USB_SERIAL
+ help
+ Say Y here if you want to use a FTDI SIO single port USB to serial
+ converter device. The implementation I have is called the USC-1000.
+ This driver has also be tested with the 245 and 232 devices.
+
+ See <http://ftdi-usb-sio.sourceforge.net/> for more
+ information on this driver and the device.
+
+config ADK_WALDUX_KERNEL_USB_SERIAL_MCT_U232
+ tristate "Support for Magic Control Technology USB-to-Serial converters"
+ depends on ADK_WALDUX_KERNEL_USB_SERIAL
+ help
+ Say Y here if you want to use a USB Serial single port adapter from
+ Magic Control Technology Corp. (U232 is one of the model numbers).
+
+ This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
+ BAY, Belkin F5U109, and Belkin F5U409 devices.
+
+config ADK_WALDUX_KERNEL_USB_SERIAL_PL2303
+ tristate "Support for Prolific PL2303 USB-to-Serial converters"
+ depends on ADK_WALDUX_KERNEL_USB_SERIAL
+ help
+ Say Y here if you want to use the PL2303 USB Serial single port
+ adapter from Prolific.
+
+config ADK_WALDUX_KERNEL_USB_SERIAL_VISOR
+ tristate "Support for Handspring Visor / Palm m50x / Sony Clie Driver"
+ depends on ADK_WALDUX_KERNEL_USB_SERIAL
+ help
+ Say Y here if you want to connect to your HandSpring Visor, Palm
+ m500 or m505 through its USB docking station. See
+ <http://usbvisor.sourceforge.net/> for more information on using this
+ driver.
+
+config ADK_WALDUX_KERNEL_USB_SERIAL_SIERRAWIRELESS
+ tristate "Support for Sierra Wireless USB-to-Serial converters"
+ depends on ADK_WALDUX_KERNEL_USB_SERIAL
+
+config ADK_WALDUX_KERNEL_USB_SERIAL_OPTION
+ tristate "USB driver for GSM and CDMA modems"
+ depends on ADK_WALDUX_KERNEL_USB_SERIAL
+ help
+ Say Y here if you have a GSM or CDMA modem that's connected to USB.
+
+config ADK_WALDUX_KERNEL_USB_SERIAL_WWAN
+ tristate
+ depends on ADK_WALDUX_KERNEL_USB_SERIAL
+
+config ADK_WALDUX_KERNEL_USB_ATM
+ tristate "Support for USB ATM devices"
+
+config ADK_WALDUX_KERNEL_USB_ATM_SPEEDTOUCH
+ tristate "Support for USB Speedtouch ADSL modem"
+ depends on ADK_WALDUX_KERNEL_USB_ATM
+
+config ADK_WALDUX_KERNEL_USB_SISUSBVGA
+ tristate "USB 2.0 SVGA dongle support (Net2280/SiS315)"
+
+config ADK_WALDUX_KERNEL_USB_NET_QMI_WWAN
+ tristate "Qualcomm LTE modems"
+ select ADK_WALDUX_KERNEL_USB_USBNET
+ help
+
+config ADK_WALDUX_KERNEL_USB_SIERRA_NET
+ tristate "Sierra Wireless MC8775 PCI Express"
+ select ADK_WALDUX_KERNEL_USB_USBNET
+ help
+ Driver for WWAN modem Sierra Wireless MC8775 PCI Express
+
+
+config ADK_WALDUX_KERNEL_SND_USB
+ bool
+ depends on ADK_WALDUX_KERNEL_USB
+
+config ADK_WALDUX_KERNEL_SND_USB_AUDIO
+ tristate
+
+config ADK_WALDUX_KERNEL_USB_GADGET
+ tristate
+
+config ADK_WALDUX_KERNEL_USB_AUDIO
+ tristate
+
+config ADK_WALDUX_KERNEL_USB_MIDI_GADGET
+ tristate "USB Midi Gadgets"
+ select ADK_WALDUX_KERNEL_USB_GADGET
+ select ADK_WALDUX_KERNEL_USB_AUDIO
+ select ADK_WALDUX_KERNEL_SND_USB_AUDIO
+ select ADK_WALDUX_KERNEL_SND_USB
+ help
+ Enable USB midi devices
+
+endmenu
+endmenu