add support for waldux

1 files changed, 185 insertions, 0 deletions

diff --git a/target/waldux/config/Config.in.bluetooth b/target/waldux/config/Config.in.bluetooth
new file mode 100644
index 000000000..012733be2
--- /dev/null
+++ b/target/waldux/config/Config.in.bluetooth
@@ -0,0 +1,185 @@
+# This file is part of the OpenADK project. OpenADK is copyrighted
+# material, please see the LICENCE file in the top-level directory.
+
+menu "Bluetooth support and drivers"
+depends on ADK_TARGET_WITH_USB \
+	|| ADK_TARGET_WITH_MINIPCI \
+	|| ADK_TARGET_WITH_SDIO \
+	|| ADK_TARGET_GENERIC
+
+config ADK_WALDUX_KERNEL_BT_BREDR
+	bool
+
+config ADK_WALDUX_KERNEL_BT_BCM
+	tristate
+
+config ADK_WALDUX_KERNEL_BT
+	tristate "Bluetooth network stack"
+	select ADK_WALDUX_KERNEL_BT_BREDR
+	default n
+	help
+	  Bluetooth is low-cost, low-power, short-range wireless technology.
+	  It was designed as a replacement for cables and other short-range
+	  technologies like IrDA.  Bluetooth operates in personal area range
+	  that typically extends up to 10 meters.  More information about
+	  Bluetooth can be found at <http://www.bluetooth.com/>.
+
+	  Linux Bluetooth subsystem consist of several layers:
+	     Bluetooth Core (HCI device and connection manager, scheduler)
+	     HCI Device drivers (Interface to the hardware)
+	     SCO Module (SCO audio links)
+	     L2CAP Module (Logical Link Control and Adaptation Protocol)
+	     RFCOMM Module (RFCOMM Protocol)  
+	     BNEP Module (Bluetooth Network Encapsulation Protocol)
+	     CMTP Module (CAPI Message Transport Protocol)
+	     HIDP Module (Human Interface Device Protocol)
+
+config ADK_WALDUX_KERNEL_BT_L2CAP
+	bool "L2CAP protocol support"
+	select ADK_WALDUX_KERNEL_BT
+	default n
+	help
+	  L2CAP (Logical Link Control and Adaptation Protocol) provides
+	  connection oriented and connection-less data transport.  L2CAP
+	  support is required for most Bluetooth applications.
+
+config ADK_WALDUX_KERNEL_BT_SCO
+	bool "SCO link support"
+	select ADK_WALDUX_KERNEL_BT
+	default n
+	help
+	  SCO link provides voice transport over Bluetooth.  SCO support is
+	  required for voice applications like Headset and Audio.
+
+config ADK_WALDUX_KERNEL_BT_RFCOMM
+	tristate "RFCOMM protocol support"
+	select ADK_WALDUX_KERNEL_BT
+	depends on ADK_WALDUX_KERNEL_BT_L2CAP
+	default n
+	help
+	  RFCOMM provides connection oriented stream transport.  RFCOMM
+	  support is required for Dialup Networking, OBEX and other Bluetooth
+	  applications.
+
+config ADK_WALDUX_KERNEL_BT_BNEP
+	tristate "BNEP protocol support"
+	select ADK_WALDUX_KERNEL_BT
+	depends on ADK_WALDUX_KERNEL_BT_L2CAP
+	default n
+	help
+	  BNEP (Bluetooth Network Encapsulation Protocol) is Ethernet
+	  emulation layer on top of Bluetooth.  BNEP is required for
+	  Bluetooth PAN (Personal Area Network).
+
+config ADK_WALDUX_KERNEL_BT_HIDP
+	tristate "HIDP protocol support"
+	select ADK_WALDUX_KERNEL_INPUT
+	select ADK_WALDUX_KERNEL_HID
+	select ADK_WALDUX_KERNEL_BT
+	depends on ADK_WALDUX_KERNEL_BT_L2CAP
+	default n
+	help
+	  HIDP (Human Interface Device Protocol) is a transport layer
+	  for HID reports.  HIDP is required for the Bluetooth Human
+	  Interface Device Profile.
+
+config ADK_WALDUX_KERNEL_BT_HCIBTSDIO
+	tristate "HCI SDIO driver"
+	select ADK_WALDUX_KERNEL_BT
+	depends on ADK_TARGET_WITH_SDIO
+	default n
+	help
+	  Bluetooth HCI SDIO driver.
+	  This driver is required if you want to use Bluetooth devices with
+	  SDIO interface.
+
+config ADK_WALDUX_KERNEL_BT_HCIBTUSB
+	tristate "HCI USB driver"
+	select ADK_WALDUX_KERNEL_BT
+	depends on ADK_TARGET_WITH_USB
+	default n
+	help
+	  Bluetooth HCI USB driver.
+	  This driver is required if you want to use Bluetooth devices with
+	  USB interface.
+
+config ADK_WALDUX_KERNEL_BT_HCIBTUSB_BCM
+	bool "Broadcom protocol support"
+	depends on ADK_WALDUX_KERNEL_BT_HCIBTUSB
+	select ADK_WALDUX_KERNEL_BT_BCM
+	help
+	  The Broadcom protocol support enables firmware and patchram
+	  download support for Broadcom Bluetooth controllers.
+
+config ADK_WALDUX_KERNEL_BT_HCIUART
+	tristate "HCI UART driver"
+	select ADK_WALDUX_KERNEL_BT
+	default n
+	help
+	  Bluetooth HCI UART driver.
+	  This driver is required if you want to use Bluetooth devices with
+	  serial port interface. You will also need this driver if you have 
+	  UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card 
+	  adapter and BrainBoxes Bluetooth PC Card.
+
+config ADK_WALDUX_KERNEL_BT_HCIUART_H4
+	bool
+	depends on ADK_WALDUX_KERNEL_BT_HCIUART
+	default n
+
+config ADK_WALDUX_KERNEL_BT_HCIUART_3WIRE
+	bool
+	depends on ADK_WALDUX_KERNEL_BT_HCIUART
+	default n
+
+config ADK_WALDUX_KERNEL_BT_HCIUART_BCM
+	tristate "Broadcom protocol support"
+	select ADK_WALDUX_KERNEL_BT_HCIUART
+	select ADK_WALDUX_KERNEL_BT_HCIUART_3WIRE
+	select ADK_WALDUX_KERNEL_BT_BCM
+	depends on ADK_TARGET_SYSTEM_RASPBERRY_PI3
+	default n
+	help
+	  The Broadcom protocol support enables Bluetooth HCI over serial
+	  port interface for Broadcom Bluetooth controllers.
+
+config ADK_WALDUX_KERNEL_BT_MRVL
+	tristate "Marvell driver"
+	select ADK_WALDUX_KERNEL_BT
+	default n
+	help
+	  Bluetooth Marvell driver.
+
+config ADK_WALDUX_KERNEL_BT_MRVL_SDIO
+	tristate "Marvell SDIO driver"
+	select ADK_PACKAGE_BRCM_BLUETOOTH
+	select ADK_WALDUX_KERNEL_BT_MRVL
+	select ADK_WALDUX_KERNEL_BT_HCIBTSDIO
+	depends on ADK_TARGET_WITH_SDIO
+	default n
+	help
+	  Bluetooth Marvell driver.
+
+config ADK_WALDUX_KERNEL_BT_HCIBCM203X
+	tristate "HCI BCM203x USB driver"
+	select ADK_WALDUX_KERNEL_FW_LOADER
+	select ADK_WALDUX_KERNEL_BT_HCIBTUSB
+	select ADK_WALDUX_KERNEL_BT
+	depends on ADK_TARGET_WITH_USB
+	default n
+	help
+	  Bluetooth HCI BCM203x USB driver.
+	  This driver provides the firmware loading mechanism for the Broadcom
+	  Blutonium based devices.
+
+config ADK_WALDUX_KERNEL_BT_HCIBPA10X
+	tristate "HCI BPA10x USB driver"
+	select ADK_WALDUX_KERNEL_BT
+	select ADK_WALDUX_KERNEL_BT_HCIBTUSB
+	default n
+	help
+	  Bluetooth HCI BPA10x USB driver.
+	  This driver provides support for the Digianswer BPA 100/105 Bluetooth
+	  sniffer devices.
+
+endmenu