should be without path, just the name of the kernel

1 files changed, 17 insertions, 17 deletions

diff --git a/target/mipsel/Makefile b/target/mipsel/Makefile
index 02e6057ca..752d80019 100644
--- a/target/mipsel/Makefile
+++ b/target/mipsel/Makefile
@@ -11,7 +11,7 @@ KERNEL:=$(LINUX_DIR)/vmlinux
 OSTRIP:=-R .reginfo -R .notes -R .note -R .comment -R .mdebug -R .note.gnu.build-id
 
 $(TOOLS_BUILD_DIR):
-	mkdir -p $(TOOLS_BUILD_DIR)
+	@mkdir -p $(TOOLS_BUILD_DIR)
 
 tools-compile: $(TOOLS_BUILD_DIR)
 	$(MAKE) -C ../tools/trx
@@ -23,7 +23,7 @@ ifeq ($(ADK_TARGET_SYSTEM_LINKSYS_WRT54G),y)
 kernel-install: tools-compile
 	$(TARGET_CROSS)objcopy $(OSTRIP) -S $(LINUX_DIR)/vmlinux \
 		$(LINUX_DIR)/vmlinuz
-	@gzip -c9 $(LINUX_DIR)/vmlinuz > $(TARGET_KERNEL)
+	@gzip -c9 $(LINUX_DIR)/vmlinuz > $(BIN_DIR)/$(TARGET_KERNEL)
 endif
 
 ifeq ($(ADK_TARGET_SYSTEM_LINKSYS_AG241),y)
@@ -33,7 +33,7 @@ kernel-install: tools-compile
 	PATH='${TARGET_PATH}' srec2bin $(LINUX_DIR)/vmlinux.srec $(LINUX_DIR)/vmlinux.bin
 	(dd if=/dev/zero bs=16 count=1; cat $(LINUX_DIR)/vmlinux.bin) > $(LINUX_DIR)/vmlinux.tmp
 	PATH='${TARGET_PATH}' addpattern -p AG3B -b -r 2.0 -i $(LINUX_DIR)/vmlinux.tmp \
-		-o $(TARGET_KERNEL) 2>/dev/null
+		-o $(BIN_DIR)/$(TARGET_KERNEL) 2>/dev/null
 endif
 
 ifeq ($(ADK_TARGET_SYSTEM_MIKROTIK_RB532),y)
@@ -44,8 +44,8 @@ endif
 
 ifeq ($(ADK_TARGET_FS),cf)
 imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSUSERTARBALL)
-	@cp $(TARGET_DIR)/boot/kernel $(TARGET_KERNEL)
-	@echo 'The kernel file is: ${TARGET_KERNEL}'
+	@cp $(TARGET_DIR)/boot/kernel $(BIN_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
 	@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSUSERTARBALL)"
 	@echo "Boot the board via network (tftp+nfsroot) and use adkinstall."
 	@echo "If you just want to update, use adkupdate."
@@ -65,43 +65,43 @@ imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSSQUASHFS)
 endif
 ifeq ($(ADK_TARGET_FS),nfsroot)
 imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSUSERTARBALL)
-	@echo 'The kernel file is: ${TARGET_KERNEL}'
+	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
 	@echo 'The nfs root tarball is: ${BIN_DIR}/${ROOTFSUSERTARBALL}'
 ifeq ($(ADK_TARGET_SYSTEM_LINKSYS_AG241),y)
 	@echo 'You can flash the kernel via tftp:'
 	@echo 'tftp 192.168.1.1'
 	@echo 'tftp> binary'
-	@echo 'tftp> put ${TARGET_KERNEL} upgrade_code.bin'
+	@echo 'tftp> put $(BIN_DIR)/${TARGET_KERNEL} upgrade_code.bin'
 endif
 ifeq ($(ADK_TARGET_SYSTEM_LINKSYS_WRT54G),y)
 	@echo 'Type following on the CFE prompt to boot the kernel:'
-	@echo 'CFE> boot -z -elf -tftp 192.168.1.254:${TARGET_KERNEL}'
+	@echo 'CFE> boot -z -elf -tftp 192.168.1.254:$(BIN_DIR)/${TARGET_KERNEL}'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),archive)
 imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
-	@cp $(KERNEL) $(TARGET_KERNEL)
-	@echo 'The kernel file is: ${TARGET_KERNEL}'
+	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
 	@echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL)"
 	@echo "Use following command to create a QEMU Image:"
 	@echo "sudo ./scripts/create-image.sh -f $(ADK_TARGET_ROOTFS) qemu-${CPU_ARCH}.img $(BIN_DIR)/$(ROOTFSTARBALL)"
 	@echo "Be sure to change permissions after image creation."
 	@echo "Start qemu with following options:"
-	@echo 'qemu-system-mipsel -nographic -M malta -kernel $(TARGET_KERNEL) -hda qemu-${CPU_ARCH}.img -append "root=/dev/hda1"'
+	@echo 'qemu-system-mipsel -nographic -M malta -kernel $(BIN_DIR)/$(TARGET_KERNEL) -hda qemu-${CPU_ARCH}.img -append "root=/dev/hda1"'
 endif
 ifeq ($(ADK_TARGET_FS),initramfs)
 imageinstall: $(BIN_DIR)/$(INITRAMFS)
-	@cp $(KERNEL) $(TARGET_KERNEL)
-	@echo 'The kernel file is: ${TARGET_KERNEL}'
+	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(BIN_DIR)/${TARGET_KERNEL}'
 	@echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}'
-	@echo 'qemu-system-mipsel -nographic -M malta -kernel $(TARGET_KERNEL) -initrd ${BIN_DIR}/${INITRAMFS}'
+	@echo 'qemu-system-mipsel -nographic -M malta -kernel $(BIN_DIR)/$(TARGET_KERNEL) -initrd ${BIN_DIR}/${INITRAMFS}'
 endif
 ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
 imageinstall: ${BUILD_DIR}/${INITRAMFS_PIGGYBACK} createinitramfs
-	@cp $(KERNEL) $(TARGET_KERNEL)
-	@echo 'The kernel+initramfs file is: ${TARGET_KERNEL}'
+	@cp $(KERNEL) $(BIN_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel+initramfs file is: $(BIN_DIR)/${TARGET_KERNEL}'
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-mipsel -nographic -M malta -kernel $(TARGET_KERNEL)'
+	@echo 'qemu-system-mipsel -nographic -M malta -kernel $(BIN_DIR)/$(TARGET_KERNEL)'
 endif
 ifeq ($(ADK_TARGET_FS),yaffs)
 imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSTARBALL)