update kernel to 3.14.43

1 files changed, 0 insertions, 44 deletions

diff --git a/target/mips/mikrotik-rb4xx/patches/3.14.40/0016-phy-mdio-bitbang-ignore-TA-value.patch b/target/mips/mikrotik-rb4xx/patches/3.14.40/0016-phy-mdio-bitbang-ignore-TA-value.patch
deleted file mode 100644
index fe23f4912..000000000
--- a/target/mips/mikrotik-rb4xx/patches/3.14.40/0016-phy-mdio-bitbang-ignore-TA-value.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From e73f7d9a658c7fc693a9b9c45a1f65c014dd6e40 Mon Sep 17 00:00:00 2001
-From: Phil Sutter <phil@nwl.cc>
-Date: Tue, 13 May 2014 01:17:38 +0200
-Subject: [PATCH] phy: mdio-bitbang: ignore TA value
-
-This is necessary on rb493g to make the kernel detect the second switch.
----
- drivers/net/phy/mdio-bitbang.c | 13 ++-----------
- 1 file changed, 2 insertions(+), 11 deletions(-)
-
-diff --git a/drivers/net/phy/mdio-bitbang.c b/drivers/net/phy/mdio-bitbang.c
-index daec9b0..4fa2be0 100644
---- a/drivers/net/phy/mdio-bitbang.c
-+++ b/drivers/net/phy/mdio-bitbang.c
-@@ -155,7 +155,7 @@ static int mdiobb_cmd_addr(struct mdiobb_ctrl *ctrl, int phy, u32 addr)
- static int mdiobb_read(struct mii_bus *bus, int phy, int reg)
- {
- 	struct mdiobb_ctrl *ctrl = bus->priv;
--	int ret, i;
-+	int ret;
- 
- 	if (reg & MII_ADDR_C45) {
- 		reg = mdiobb_cmd_addr(ctrl, phy, reg);
-@@ -165,16 +165,7 @@ static int mdiobb_read(struct mii_bus *bus, int phy, int reg)
- 
- 	ctrl->ops->set_mdio_dir(ctrl, 0);
- 
--	/* check the turnaround bit: the PHY should be driving it to zero */
--	if (mdiobb_get_bit(ctrl) != 0) {
--		/* PHY didn't drive TA low -- flush any bits it
--		 * may be trying to send.
--		 */
--		for (i = 0; i < 32; i++)
--			mdiobb_get_bit(ctrl);
--
--		return 0xffff;
--	}
-+	mdiobb_get_bit(ctrl);
- 
- 	ret = mdiobb_get_num(ctrl, 16);
- 	mdiobb_get_bit(ctrl);
--- 
-1.8.5.3
-